Ergonomics investigation of retail ice cream operations.

PubMed

Dempsey, P G; McGorry, R R; Cotnam, J; Braun, T W

2000-04-01

A comprehensive ergonomics evaluation of retail ice cream shops, including field and laboratory data collection, was conducted using a human:workplace model approach to ergonomics practice. The goal of the evaluation was to provide recommendations to enhance the health, safety, and productivity of shop employees. Active and passive surveillance and facility walk-throughs were used to guide the selection of analyses. A primary focus of the investigation was quantifying the task demands of scooping ice cream, which have not been documented in the literature. This goal was accomplished through the use of a custom-designed instrumented ice cream scoop. Data were collected at an ice cream shop under typical conditions, while the laboratory experiment investigated task demands of ice cream scooping over a range of realistic temperatures. Manual materials handling task analyses and anthropometric evaluations comprised the majority of other analyses performed. Recommendations are presented that are applicable to the operation of retail ice cream shops that serve hard (i.e., scooped) ice cream.

Analysis of results from wind tunnel tests of inlets for an advanced turboprop nacelle installation

NASA Technical Reports Server (NTRS)

Hancock, J. P.; Lyman, V.; Pennock, A. P.

1986-01-01

Inlets for tractor installations of advanced turboprop propulsion systems were tested in three phases, covering a period from November, 1982 to January, 1984. Nacelle inlet configuration types included single scoop, twin scoop, and annular arrangements. Tests were performed with and without boundary layer diverters and several different diverter heights were tested for the single scoop inlet. This same inlet was also tested at two different axial positions. Test Mach numbers ranged from Mach 0.20 to 0.80. Types of data taken were: (1) internal and external pressures, including inlet throat recoveries; (2) balance forces, including thrust-minus-drag; and (3) propellar blade stresses.

SCOOP: A Measurement and Database of Student Online Search Behavior and Performance

ERIC Educational Resources Information Center

Zhou, Mingming

2015-01-01

The ability to access and process massive amounts of online information is required in many learning situations. In order to develop a better understanding of student online search process especially in academic contexts, an online tool (SCOOP) is developed for tracking mouse behavior on the web to build a more extensive account of student web…

Mars Hand Lens Imager (MAHLI) Efforts and Observations at the Rocknest Eolian Sand Shadow in Curiosity's Gale Crater Field Site

NASA Technical Reports Server (NTRS)

Edgett, K. S.; Yingst, R. A.; Minitti, M. E.; Goetz, W.; Kah, L. C.; Kennedy, M. R.; Lipkaman, L. J.; Jensen, E. H.; Anderson, R. C.; Beegle, L. W.;

Using Artifacts to Characterize Reform-Oriented Instruction: The Scoop Notebook and Rating Guide. CSE Technical Report 707

ERIC Educational Resources Information Center

Borko, Hilda; Stecher, Brian; Kuffner, Karin

2007-01-01

This document includes the final data collection and scoring tools created by the "Scoop" project, a five-year project funded through the Center for Evaluation, Standards,and Student Testing (CRESST), to develop an alternative approach for characterizing classroom practice. The goal of the project was to use artifacts and related materials to…

Soil Sample Poised at TEGA Door

NASA Technical Reports Server (NTRS)

2008-01-01

This image was taken by NASA's Phoenix Mars Lander's Surface Stereo Imager on Sol 11 (June 5, 2008), the eleventh day after landing. It shows the Robotic Arm scoop containing a soil sample poised over the partially open door of the Thermal and Evolved-Gas Analyzer's number four cell, or oven.

Light-colored clods of material visible toward the scoop's lower edge may be part of the crusted surface material seen previously near the foot of the lander. The material inside the scoop has been slightly brightened in this image.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Astronauts James Lovell uses scoop from ALHT during simulation

NASA Image and Video Library

1969-12-01

S70-20272 (December 1969) --- Astronaut James A. Lovell Jr., commander of the upcoming Apollo 13 lunar landing mission, uses a scoop from the Apollo Lunar Hand Tools (ALHT) during a simulated lunar surface traverse at the Kapoho, Hawaii training site. While at the Hawaii training sites, Lovell and Haise are participating in thorough rehearsals of their extravehicular activity (EVA). Photo credit: NASA

The Value of the Freshwater Snail Dip Scoop Sampling Method in Macroinvertebrates Bioassessment of Sugar Mill Wastewater Pollution in Mbandjock, Cameroon

PubMed Central

Takougang, Innocent; Barbazan, Phillipe; Tchounwou, Paul B.; Noumi, Emmanuel

2008-01-01

Macroinvertebrates identification and enumeration may be used as a simple and affordable alternative to chemical analysis in water pollution monitoring. However, the ecological responses of various taxa to pollution are poorly known in resources-limited tropical countries. While freshwater macroinvertebrates have been used in the assessment of water quality in Europe and the Americas, investigations in Africa have mainly focused on snail hosts of human parasites. There is a need for sampling methods that can be used to assess both snails and other macroinvertebrates. The present study was designed to evaluate the usefulness of the freshwater snail dip scoop method in the study of macroinvertebrates for the assessment of the SOSUCAM sugar mill effluents pollution. Standard snail dip scoop samples were collected upstream and downstream of the factory effluent inputs, on the Mokona and Mengoala rivers. The analysis of the macroinvertebrate communities revealed the absence of Ephemeroptera and Trichoptera, and the thriving of Syrphidae in the sections of the rivers under high effluent load. The Shannon & Weaver diversity index was lower in these areas. The dip scoop sampling protocol was found to be a useful method for macroinvertebrates collection. Hence, this method is recommended as a simple, cost-effective and efficient tool for the bio-assessment of freshwater pollution in developing countries with limited research resources. PMID:18441407

The value of the freshwater snail dip scoop sampling method in macroinvertebrates bioassessment of sugar mill wastewater pollution in Mbandjock, Cameroon.

PubMed

Takougang, Innocent; Barbazan, Phillipe; Tchounwou, Paul B; Noumi, Emmanuel

2008-03-01

Macroinvertebrates identification and enumeration may be used as a simple and affordable alternative to chemical analysis in water pollution monitoring. However, the ecological responses of various taxa to pollution are poorly known in resources-limited tropical countries. While freshwater macroinvertebrates have been used in the assessment of water quality in Europe and the Americas, investigations in Africa have mainly focused on snail hosts of human parasites. There is a need for sampling methods that can be used to assess both snails and other macroinvertebrates. The present study was designed to evaluate the usefulness of the freshwater snail dip scoop method in the study of macroinvertebrates for the assessment of the SOSUCAM sugar mill effluents pollution. Standard snail dip scoop samples were collected upstream and downstream of the factory effluent inputs, on the Mokona and Mengoala rivers. The analysis of the macroinvertebrate communities revealed the absence of Ephemeroptera and Trichoptera, and the thriving of Syrphidae in the sections of the rivers under high effluent load. The Shannon & Weaver diversity index was lower in these areas. The dip scoop sampling protocol was found to be a useful method for macroinvertebrates collection. Hence, this method is recommended as a simple, cost-effective and efficient tool for the bio-assessment of freshwater pollution in developing countries with limited research resources.

Survey of Soviet Heavy Industry (8).

DTIC Science & Technology

1961-02-21

is älöo, #rööüei,ng pumps for the ore mining and petroleum industriell foÄj ifailroads 4nd ship- yards. The pumps from this plant k,t$ fattto’iis...Pravda. 30 August 1960. Partial tiräns^ lation). STEEL MD METALLURGY New Technical Innovations Brirging to light the historical decision of the... innovations cr- eated at our plant. Recently the first electric drag with 250 liter capacity scoops with a scooping depth of 12 meters was produced

Commander Naval Air Forces (CNAF) Flight Hour Program: Budgeting and Execution Response to the Implementation of the Fleet Response Plan and OP-20 Pricing Model Changes

DTIC Science & Technology

2005-06-01

seat ratio ( CSR ). The wartime CSR is the result of wartime manning levels divided by Primary Aircraft Authorized (PAA). The Aircrew Manning Factor...justifies the FHP.59 As ADM Mallon suggested, let us look at two simple examples of today’s best business practices with Starbucks and Southwest Airlines...focusing on efforts to achieve optimal efficiency in routine tasks of their operation. The Starbucks example involves redesigning ice scoops and

Martian Soil Ready for Robotic Laboratory Analysis

NASA Technical Reports Server (NTRS)

2008-01-01

NASA's Phoenix Mars Lander scooped up this Martian soil on the mission's 11th Martian day, or sol, after landing (June 5, 2008) as the first soil sample for delivery to the laboratory on the lander deck.

The material includes a light-toned clod possibly from crusted surface of the ground, similar in appearance to clods observed near a foot of the lander.

This approximately true-color view of the contents of the scoop on the Robotic Arm comes from combining separate images taken by the Robotic Arm Camera on Sol 11, using illumination by red, green and blue light-emitting diodes on the camera.

The scoop loaded with this sample was poised over an open sample-delivery door of Thermal and Evolved-Gas Analyzer at the end of Sol 11, ready to be dumped into the instrument on the next sol.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

In-depth survey report: control technology for manual transfer of chemical powders at the B. F. Goodrich Company, Marietta, Ohio

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gressel, M.G.; Heitbrink, W.A.; McGlothlin, J.D.

1985-12-01

A field study was conducted in the B.F. Goodrich Industrial Plastics Division facility, Marietta, Ohio to evaluate sources of worker dust exposure at a ventilated booth used for the weigh out and transfer of powdered materials from large drums to small bags. The sources of dust exposure evaluated were: depth of scooping, clothing, worker anthropometry, work practices, biomechanics, and specific items in the job cycle. Dust exposure for workers wearing clean clothing was not significantly different from exposure for workers wearing dirty clothing. Depth of scooping from the drum significantly affected dust exposure. There appeared also to be a relationshipmore » between the size of the worker and dust exposure when scooping from the bottom of the drum. Work practices may also play a part. The authors conclude that, while the results showed abnormally high dust levels, all three workers studied wore respirable dust respirators during the experiment to protect them from these high levels. Air flow patterns at the booth suggest that the ventillation provided may even contributed to dust exposure.« less

Experimental Investigation Of Base Flow Buffeting On The Ariane 5 Launcher Using High Speed PIV

NASA Astrophysics Data System (ADS)

Schrijer, F. F. J.; Sciacchitano, A.; Scarrano, F.; Hannemann, K.; Pallegoix, J.-F.; Maseand, J. E. J.; Schwane, R.

2011-05-01

Experiments have been performed on a 1:60 scale Ariane 5 launcher in the DNW HST wind tunnel by means of two-component particle image velocimetry (2C-PIV). Measurements are performed for Mach 0.5 and Mach 0.8. The investigation focuses on studying the flow-buffeting phenomenon in the base of an Ariane V rocket. In total four configurations are tested: reference configuration, skirt, scoop and reference configuration without struts. It has been found that the presence of the struts has a large effect on the flow field; the secondary flow caused by the struts decreases the separated region and increases the overall turbulence. The skirt has the effect that the shear layer separates later and therefore does not reattach on the nozzle. Also in the separated region a secondary recirculation region is formed. For the scoop configuration it was observed that a second wake was formed by the scoop element causing the overall shear layer to become thicker. Finally using POD analysis two dominant modes are identified that can be associated to the separation bubble and shear layer dynamics.

Vertical-Screw-Auger Conveyer Feeder

NASA Technical Reports Server (NTRS)

Walton, Otis (Inventor); Vollmer, Hubert J. (Inventor)

2016-01-01

A conical feeder is attached to a vertically conveying screw auger. The feeder is equipped with scoops and rotated from the surface to force-feed regolith the auger. Additional scoops are possible by adding a cylindrical section above the conical funnel section. Such then allows the unit to collect material from swaths larger in diameter than the enclosing casing pipe of the screw auger. A third element includes a flexible screw auger. All three can be used in combination in microgravity and zero atmosphere environments to drill and recover a wide area of subsurface regolith and entrained volatiles through a single access point on the surface.

Floating air riding seal for a turbine

DOEpatents

Ebert, Todd A

2016-08-16

A floating air riding seal for a gas turbine engine with a rotor and a stator, an annular piston chamber with an axial moveable annular piston assembly within the annular piston chamber formed in the stator, an annular cavity formed on the annular piston assembly that faces a seal surface on the rotor, where the axial moveable annular piston includes an inlet scoop on a side opposite to the annular cavity that scoops up the swirling cooling air and directs the cooling air to the annular cavity to form an air cushion with the seal surface of the rotor.

Sentinel-3 SAR Altimetry over Coastal and Open Ocean: performance assessment and improved retrieval methods in the ESA SCOOP Project.

NASA Astrophysics Data System (ADS)

Benveniste, J.; Cotton, D.; Moreau, T.; Raynal, M.; Varona, E.; Cipollini, P.; Cancet, M.; Martin, F.; Fenoglio-Marc, L.; Naeije, M.; Fernandes, J.; Lazaro, C.; Restano, M.; Ambrózio, A.

2017-12-01

The ESA Sentinel-3 satellite, launched in February 2016 as a part of the Copernicus programme, is the second satellite to operate a SAR mode altimeter. The Sentinel 3 Synthetic Aperture Radar Altimeter (SRAL) is based on the heritage from Cryosat-2, but this time complemented by a Microwave Radiometer (MWR) to provide a wet troposphere correction, and operating at Ku and C-Bands to provide an accurate along-track ionospheric correction. The SRAL is operated in SAR mode over the whole ocean and promises increased performance w.r.t. conventional altimetry. SCOOP (SAR Altimetry Coastal & Open Ocean Performance) is a project funded under the ESA SEOM (Scientific Exploitation of Operational Missions) Programme Element, started in September 2015, to characterise the expected performance of Sentinel-3 SRAL SAR mode altimeter products, in the coastal zone and open-ocean, and then to develop and evaluate enhancements to the baseline processing scheme in terms of improvements to ocean measurements. There is also a work package to develop and evaluate an improved Wet Troposphere correction for Sentinel-3, based on the measurements from the on-board MWR, further enhanced mostly in the coastal and polar regions using third party data, and provide recommendations for use. In this presentation we present results from the SCOOP project that demonstrate the excellent performance of SRAL in terms of measurement precision, and we illustrate the development and testing of new processing approaches designed specifically to improve performance close to the coast. The SCOOP test data sets and relevant documentation are available to external researchers on application to the project team. At the end of the project recommendations for further developments and implementations will be provided through a scientific roadmap.

Zero Horizontal Reaction Force Excavator

NASA Technical Reports Server (NTRS)

Mueller, Robert P. (Inventor); Nick, Andrew J. (Inventor); Schuler, Jason M. (Inventor); Smith, Jonathan D. (Inventor)

2015-01-01

An excavator includes a mobile chassis with a first bucket drum and a second bucket drum coupled thereto. The first bucket drum and second bucket drum are coupled to the chassis for positioning thereof on the surface at opposing ends of the chassis. Each first scoop on the first bucket drum is a mirror image of one second scoop on the second bucket drum when (i) the first bucket drum and second bucket drum are on the surface adjacent opposing ends of the chassis, and (ii) the first bucket drum is rotated in one direction and the second bucket drum is simultaneously rotated in an opposing direction.

Mineralogy and Elemental Composition of Wind Drift Soil at Rocknest, Gale Crater

NASA Technical Reports Server (NTRS)

Blake, D. F.; Bish, D. L.; Morris, R. V.; Downs, R. T.; Trieman, A. H.; Morrison, S. M.; Chipera, S. J.; Ming, D. W.; Yen, A. S.; Vaniman, D. T.;

Phoenix Makes an Impression on Mars

NASA Technical Reports Server (NTRS)

2008-01-01

This view from the Surface Stereo Imager on NASA's Phoenix Mars Lander shows the first impression dubbed Yeti and looking like a wide footprint -- made on the Martian soil by the Robotic Arm scoop on Sol 6, the sixth Martian day of the mission, (May 31, 2008).

Touching the ground is the first step toward scooping up soil and ice and delivering the samples to the lander's experiments.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Analytical modeling of circuit aerodynamics in the new NASA Lewis wind tunnel

NASA Technical Reports Server (NTRS)

Towne, C. E.; Povinelli, L. A.; Kunik, W. G.; Muramoto, K. K.; Hughes, C. E.; Levy, R.

1985-01-01

Rehabilitation and extention of the capability of the altitude wind tunnel (AWT) was analyzed. The analytical modeling program involves the use of advanced axisymmetric and three dimensional viscous analyses to compute the flow through the various AWT components. Results for the analytical modeling of the high speed leg aerodynamics are presented; these include: an evaluation of the flow quality at the entrance to the test section, an investigation of the effects of test section bleed for different model blockages, and an examination of three dimensional effects in the diffuser due to reentry flow and due to the change in cross sectional shape of the exhaust scoop.

Air-sampling inlet contamination by aircraft emissions on the NASA CV-990 aircraft

NASA Technical Reports Server (NTRS)

Condon, E. P.; Vedder, J. F.

1984-01-01

Results of an experimental investigation of the contamination of air sampling inlets by aircraft emissions from the NASA CV-990 research aircraft are presented. This four-engine jet aircraft is a NASA facility used for many different atmospheric and meteorological experiments, as well as for developing spacecraft instrumentation for remote measurements. Our investigations were performed to provide information on which to base the selection of sampling locations for a series of multi-instrument missions for measuring tropospheric trace gases. The major source of contamination is the exhaust from the jet engines, which generate many of the same gases that are of interest in atmospheric chemistry, as well as other gases that may interfere with sampling measurements. The engine exhaust contains these gases in mixing ratios many orders of magnitude greater than those that occur in the clean atmosphere which the missions seek to quantify. Pressurized samples of air were collected simultaneously from a scoop located forward of the engines to represent clean air and from other multiport scoops at various aft positions on the aircraft. The air samples were analyzed in the laboratory by gas chromatography for carbon monoxide, an abundant combustion by-product. Data are presented for various scoop locations under various flight conditions.

Experimental evaluation of two turning vane designs for high-speed corner of 0.1-scale model of NASA Lewis Research Center's proposed altitude wind tunnel

NASA Technical Reports Server (NTRS)

Moore, R. D.; Boldman, D. R.; Shyne, R. J.

1986-01-01

Two turning vane designs were experimentally evaluated for corner 1 (downstream of the test section) of a 0.1-scale model of the NASA Lewis Research Center's proposed Altitude Wind Tunnel (AWT). Vane A was a controlled-diffusion airfoil shape; vane B was a circular-arc airfoil shape. The vane designs were tested over corner inlet Mach numbers from 0.16 to 0.465. Several modifications in vane setting angle and vane spacing were also evaluated for vane A. The overall performance obtained from total pressure rakes indicated that vane B had a slightly lower loss coefficient than vane A. At Mach 0.35 (the design Mach number without the engine exhaust removal scoop), the loss coefficients were 0.150 and 0.178 for vanes B and A, respectively. Resetting the vane A angle by -5 deg. (vane A10) to turn the flow toward the outside corner reduced the loss coefficient to 0.119. The best configuration (vane A10) was also tested with a simulated engine exhaust removal scoop. The loss coefficient for that configuration was 0.164 at Mach 0.41 (the approximate design Mach number with the scoop).

Mechanics and energetics in tool manufacture and use: a synthetic approach.

PubMed

Wang, Liyu; Brodbeck, Luzius; Iida, Fumiya

2014-11-06

Tool manufacture and use are observed not only in humans but also in other animals such as mammals, birds and insects. Manufactured tools are used for biomechanical functions such as effective control of fluids and small solid objects and extension of reaching. These tools are passive and used with gravity and the animal users' own energy. From the perspective of evolutionary biology, manufactured tools are extended phenotypes of the genes of the animal and exhibit phenotypic plasticity. This incurs energetic cost of manufacture as compared to the case with a fixed tool. This paper studies mechanics and energetics aspects of tool manufacture and use in non-human beings. Firstly, it investigates possible mechanical mechanisms of the use of passive manufactured tools. Secondly, it formulates the energetic cost of manufacture and analyses when phenotypic plasticity benefits an animal tool maker and user. We take a synthetic approach and use a controlled physical model, i.e. a robot arm. The robot is capable of additively manufacturing scoop and gripper structures from thermoplastic adhesives to pick and place fluid and solid objects, mimicking primates and birds manufacturing tools for a similar function. We evaluate the effectiveness of tool use in pick-and-place and explain the mechanism for gripper tools picking up solid objects with a solid-mechanics model. We propose a way to formulate the energetic cost of tool manufacture that includes modes of addition and reshaping, and use it to analyse the case of scoop tools. Experiment results show that with a single motor trajectory, the robot was able to effectively pick and place water, rice grains, a pebble and a plastic box with a scoop tool or gripper tools that were manufactured by itself. They also show that by changing the dimension of scoop tools, the energetic cost of tool manufacture and use could be reduced. The work should also be interesting for engineers to design adaptive machines. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Mechanics and energetics in tool manufacture and use: a synthetic approach

PubMed Central

Wang, Liyu; Brodbeck, Luzius; Iida, Fumiya

2014-01-01

Tool manufacture and use are observed not only in humans but also in other animals such as mammals, birds and insects. Manufactured tools are used for biomechanical functions such as effective control of fluids and small solid objects and extension of reaching. These tools are passive and used with gravity and the animal users' own energy. From the perspective of evolutionary biology, manufactured tools are extended phenotypes of the genes of the animal and exhibit phenotypic plasticity. This incurs energetic cost of manufacture as compared to the case with a fixed tool. This paper studies mechanics and energetics aspects of tool manufacture and use in non-human beings. Firstly, it investigates possible mechanical mechanisms of the use of passive manufactured tools. Secondly, it formulates the energetic cost of manufacture and analyses when phenotypic plasticity benefits an animal tool maker and user. We take a synthetic approach and use a controlled physical model, i.e. a robot arm. The robot is capable of additively manufacturing scoop and gripper structures from thermoplastic adhesives to pick and place fluid and solid objects, mimicking primates and birds manufacturing tools for a similar function. We evaluate the effectiveness of tool use in pick-and-place and explain the mechanism for gripper tools picking up solid objects with a solid-mechanics model. We propose a way to formulate the energetic cost of tool manufacture that includes modes of addition and reshaping, and use it to analyse the case of scoop tools. Experiment results show that with a single motor trajectory, the robot was able to effectively pick and place water, rice grains, a pebble and a plastic box with a scoop tool or gripper tools that were manufactured by itself. They also show that by changing the dimension of scoop tools, the energetic cost of tool manufacture and use could be reduced. The work should also be interesting for engineers to design adaptive machines. PMID:25209405

Physiological and subjective measures of workload when shovelling with a conventional and two-handled ('levered') shovel.

PubMed

Bridger, R S; Cabion, N; Goedecke, J; Rickard, S; Schabort, E; Westgarth-Taylor, C; Lambert, M I

1997-11-01

Previous studies have suggested that the two-handled (levered) shovel is advantageous over the conventional spade from a biomechanical point of view. The aim of this experiment was to determine whether less energy was consumed while shovelling a load of sand with this shovel compared to a conventional tool. Accordingly, an experiment was designed in which subjects (n = 10) shovelled 1815 kg sand under laboratory conditions using either a conventional or a levered shovel. Heart rate and oxygen consumption were measured continuously during the trial and subjective data on perceived exertion, general fatigue and body discomfort were recorded after the trial. Although total energy expenditure was similar under both conditions (120 +/- 20 and 125 +/- 25 kcal; conventional versus two-handled spade), average heart rate was 4% higher when the two-handled shovel was used (p < 0.05). In addition, the mass of sand per scoop was 4% less with the two-handled shovel (p < 0.05). In conclusion, subjects used similar energy expenditure to shovel 1815 kg sand with the conventional shovel and the two-handled tool despite lower mass of sand per scoop with the latter. This can be explained by the fact that the increased mass of the additional handle compensated for the lower mass of sand per scoop. The higher average heart rate while shovelling with the two-handled shovel can be explained by the more erect posture.

Phoenix Robotic Arm Rasp

NASA Image and Video Library

2008-07-15

This photograph shows the rasp protruding from the back of the scoop on NASA Phoenix Mars Lander Robotic Arm engineering model in the Payload Interoperability Testbed at the University of Arizona, Tucson.

Interactive Health Games

MedlinePlus

... Safety Education) Food Safety Mobile Game (Department of Agriculture, Food Safety and Inspection Service) Michael's Inside Scoop: ... Safety Education) Food Safety Mobile Game (Department of Agriculture, Food Safety and Inspection Service) Foodborne Illness Food ...

Terrestrial Clay under Microscope

NASA Image and Video Library

2008-09-30

A scanning electron microscope captured this image of terresterial soil containing a phyllosilicate mineral from Koua Bocca, Ivory Coast, West Africa. This soil shares some similarities with Martian soil scooped by NASA Phoenix Lander.

The Remote Food Photography Method Accurately Estimates Dry Powdered Foods-The Source of Calories for Many Infants.

PubMed

Duhé, Abby F; Gilmore, L Anne; Burton, Jeffrey H; Martin, Corby K; Redman, Leanne M

2016-07-01

Infant formula is a major source of nutrition for infants, with more than half of all infants in the United States consuming infant formula exclusively or in combination with breast milk. The energy in infant powdered formula is derived from the powder and not the water, making it necessary to develop methods that can accurately estimate the amount of powder used before reconstitution. Our aim was to assess the use of the Remote Food Photography Method to accurately estimate the weight of infant powdered formula before reconstitution among the standard serving sizes. For each serving size (1 scoop, 2 scoops, 3 scoops, and 4 scoops), a set of seven test bottles and photographs were prepared as follow: recommended gram weight of powdered formula of the respective serving size by the manufacturer; three bottles and photographs containing 15%, 10%, and 5% less powdered formula than recommended; and three bottles and photographs containing 5%, 10%, and 15% more powdered formula than recommended (n=28). Ratio estimates of the test photographs as compared to standard photographs were obtained using standard Remote Food Photography Method analysis procedures. The ratio estimates and the US Department of Agriculture data tables were used to generate food and nutrient information to provide the Remote Food Photography Method estimates. Equivalence testing using the two one-sided t tests approach was used to determine equivalence between the actual gram weights and the Remote Food Photography Method estimated weights for all samples, within each serving size, and within underprepared and overprepared bottles. For all bottles, the gram weights estimated by the Remote Food Photography Method were within 5% equivalence bounds with a slight underestimation of 0.05 g (90% CI -0.49 to 0.40; P<0.001) and mean percent error ranging between 0.32% and 1.58% among the four serving sizes. The maximum observed mean error was an overestimation of 1.58% of powdered formula by the Remote Food Photography Method under controlled laboratory conditions, indicating that the Remote Food Photography Method accurately estimated infant powdered formula. Copyright © 2016 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

The Remote Food Photography Method accurately estimates dry powdered foods—the source of calories for many infants

PubMed Central

Duhé, Abby F.; Gilmore, L. Anne; Burton, Jeffrey H.; Martin, Corby K.; Redman, Leanne M.

2016-01-01

Background Infant formula is a major source of nutrition for infants with over half of all infants in the United States consuming infant formula exclusively or in combination with breast milk. The energy in infant powdered formula is derived from the powder and not the water making it necessary to develop methods that can accurately estimate the amount of powder used prior to reconstitution. Objective To assess the use of the Remote Food Photography Method (RFPM) to accurately estimate the weight of infant powdered formula before reconstitution among the standard serving sizes. Methods For each serving size (1-scoop, 2-scoop, 3-scoop, and 4-scoop), a set of seven test bottles and photographs were prepared including the recommended gram weight of powdered formula of the respective serving size by the manufacturer, three bottles and photographs containing 15%, 10%, and 5% less powdered formula than recommended, and three bottles and photographs containing 5%, 10%, and 15% more powdered formula than recommended (n=28). Ratio estimates of the test photographs as compared to standard photographs were obtained using standard RFPM analysis procedures. The ratio estimates and the United States Department of Agriculture (USDA) data tables were used to generate food and nutrient information to provide the RFPM estimates. Statistical Analyses Performed Equivalence testing using the two one-sided t- test (TOST) approach was used to determine equivalence between the actual gram weights and the RFPM estimated weights for all samples, within each serving size, and within under-prepared and over-prepared bottles. Results For all bottles, the gram weights estimated by the RFPM were within 5% equivalence bounds with a slight under-estimation of 0.05 g (90% CI [−0.49, 0.40]; p<0.001) and mean percent error ranging between 0.32% and 1.58% among the four serving sizes. Conclusion The maximum observed mean error was an overestimation of 1.58% of powdered formula by the RFPM under controlled laboratory conditions indicating that the RFPM accurately estimated infant powdered formula. PMID:26947889

Drilling into Mars

NASA Image and Video Library

2013-02-20

This frame from an animation of NASA Curiosity rover shows the complicated suite of operations involved in conducting the rover first rock sample drilling on Mars and transferring the sample to the rover scoop for inspection.

Stickler Syndrome

MedlinePlus

... Children who have Stickler syndrome often have distinctive facial features — prominent eyes, a small nose with a scooped ... develop ear infections than are children with normal facial features. Deafness. Hearing loss may worsen with time and ...

CHIMRA: Scoops, Sieves and Delivers Samples

NASA Image and Video Library

2012-10-04

This false-color engineering drawing shows the Collection and Handling for In-Situ Martian Rock Analysis CHIMRA device, attached to the turret at the end of the robotic arm on NASA Curiosity Mars rover.

Debris Kicked Up By Impact of A Protective Cover from Viking Lander 1

NASA Image and Video Library

1996-12-12

The patch of dark material toward the top of this picture (arrow) taken by NASA's Viking 1 Lander is the debris kicked up by the impact of a protective cover ejected from the spacecraft at 1 a.m. today. The cylindrical cover, which bounced out of view of the camera, protects the scoop at the end of the soil sampler arm. (The scoop will dig into the Martian surface for the first time on July 28). Dust and debris atop the footpad remains as it was seen in the Lander's first picture taken immediately after landing two days ago. No wind modification is apparent. On the surface, a variety of block sizes, shapes and tones are seen, and some rocks are Partially buried. http://photojournal.jpl.nasa.gov/catalog/PIA00384

East African magadi (trona): flouride concentration and mineralogical composition

NASA Astrophysics Data System (ADS)

Nielsen, Joan M.

1999-08-01

Magadi from Lake Magadi, Kenya, Lake Natron, Tanzania, Lake Katwe, Uganda, El-Atrun, Sudan and efflorescent crust from the soil surface (scooped magadi) from northern Tanzania have been analysed chemically to determine fluoride and carbonates concentrations and by X-ray diffraction to determine the mineralogical composition. Magadi from Lake Natron and Lake Magadi are found to be very similar consisting mainly of trona (CO 32- + HCO 3- > 10.4 meq [g magadi] -1) mixed with halite and either kogarkoite or villaumite, respectively, resulting in fluoride concentrations up to 8.7 mg F - [g magadi] -1. The scooped magadi is not as pure with respect to trona as the crystalline magadi, but the fluoride content is of same order of magnitude (0.23-5.1 mg F - [g magadi] -1). The scooped magadi consists of trona (CO 32- + HCO 3 = 3.5-9.5 meq [g magadi] -1) with different mixtures of halite, quartz, villiaumite, kogarkoite and thermonatrite. No fluoride containing minerals are identified in magadi from Uganda and Sudan, probably due to the very low fluoride concentrations of 0.02 and < O.24 mg (g magadi) -1, respectively, indicating that these samples are not contaminated with fluoride. The Sudanese magadi is a different mixture of trona, halite and quartz resulting in a variation in the carbonate concentration of 4.6-11.9 meq (g magadi) -1. The magadi from Lake Katwe consists of trona (CO 32- + HCO 3- = 7.0 meq [g magadi] -1) mixed with burkeite and halite.

Michael's Inside Scoop: Genetics

MedlinePlus

... Vegetables Desserts Dining Decisions Mobile App – Dining Decisions Game Online Game – Dining Decisions Questions Answered Under the Microscope Xpert ... Test Your Smarts Feeling Frazzled…? Feeling Stressed Out? Game Grind Your Mind Game Kabam! Comic Creator Best ...

Confidence Hills Drill Powder in Scoop

NASA Image and Video Library

2014-11-04

This image from NASA Curiosity rover shows a sample of powdered rock extracted by the rover drill from the Confidence Hills target -- the first rock drilled after Curiosity reached the base of Mount Sharp in September 2014.

Working End of Robotic Arm on Phoenix

NASA Image and Video Library

2007-08-02

This illustration shows some of the components on and near the end of the robotic arm on NASA Phoenix Mars Lander. Primary and secondary blades on the scoop that aided in the collection of soil samples.

Too Big for the Sieve

NASA Image and Video Library

2012-10-11

In this image, the scoop on NASA Curiosity rover shows the larger soil particles that were too big to filter through a sample-processing sieve that is porous only to particles less than 0.006 inches 150 microns across.

NPL scoops £25m for advanced metrology centre

NASA Astrophysics Data System (ADS)

Singh Chadha, Kulvinder

2013-03-01

The National Physical Laboratory (NPL) in Teddington, UK, is to receive £25m towards the construction of an Advanced Metrology Laboratory (AML) that will contain up to 20 labs and be complete by 2017.

Rasp Tool on Phoenix Robotic Arm Model

NASA Image and Video Library

2008-07-15

This close-up photograph taken at the Payload Interoperability Testbed at the University of Arizona, Tucson, shows the motorized rasp protruding from the bottom of the scoop on the engineering model of NASA Phoenix Mars Lander Robotic Arm.

'Rosy Red' Soil in Phoenix's Scoop

NASA Technical Reports Server (NTRS)

2008-01-01

This image shows fine-grained material inside the Robotic Arm scoop as seen by the Robotic Arm Camera (RAC) aboard NASA's Phoenix Mars Lander on June 25, 2008, the 30th Martian day, or sol, of the mission.

The image shows fine, fluffy, red soil particles collected in a sample called 'Rosy Red.' The sample was dug from the trench named 'Snow White' in the area called 'Wonderland.' Some of the Rosy Red sample was delivered to Phoenix's Optical Microscope and Wet Chemistry Laboratory for analysis.

The RAC provides its own illumination, so the color seen in RAC images is color as seen on Earth, not color as it would appear on Mars.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Mars Molniya Orbit Atmospheric Resource Mining

NASA Technical Reports Server (NTRS)

Mueller, Robert P.; Braun, Robert D.; Sibille, Laurent; Sforzo, Brandon; Gonyea, Keir; Ali, Hisham

2016-01-01

This NIAC (NASA Advanced Innovative Concepts) work will focus on Mars and will build on previous efforts at analyzing atmospheric mining at Earth and the outer solar system. Spacecraft systems concepts will be evaluated and traded, to assess feasibility. However the study will primarily examine the architecture and associated missions to explore the closure, constraints and critical parameters through sensitivity studies. The Mars atmosphere consists of 95.5 percent CO2 gas which can be converted to methane fuel (CH4) and Oxidizer (O2) for chemical rocket propulsion, if hydrogen is transported from electrolyzed water on the Mars surface or from Earth. By using a highly elliptical Mars Molniya style orbit, the CO2 atmosphere can be scooped, ram-compressed and stored while the spacecraft dips into the Mars atmosphere at periapsis. Successive orbits result in additional scooping of CO2 gas, which also serves to aerobrake the spacecraft, resulting in a decaying Molniya orbit.

Mineralogy of Eolian Sands at Gale Crater

NASA Technical Reports Server (NTRS)

Achilles, C. N.; Vaniman, D. T.; Blake, D. F.; Bristow, T. F.; Rampe, E. B.; Ming, D. W.; Chipera, S. J.; Morris, R. V.; Morrison, S. M.; Downs, R. T.;

Windblown Sand from the Rocknest Drift

NASA Image and Video Library

2012-12-03

NASA Mars rover Curiosity acquired close-up views of sands in the Rocknest wind drift to document the nature of the material that the rover scooped, sieved and delivered to the CheMin and SAM instruments in October and November 2012.

Panorama of Phoenix Solar Panel and Robotic Arm

NASA Image and Video Library

2008-06-13

This panorama image of NASA’s Phoenix Mars Lander’s solar panel and the lander’s Robotic Arm with a sample in the scoop. The image was taken just before the sample was delivered to the Optical Microscope.

Scoop on Strep Throat (For Kids)

MedlinePlus

... First Aid & Safety Doctors & Hospitals Videos Recipes for Kids Kids site Sitio para niños How the Body Works ... Educators Search English Español Strep Throat KidsHealth / For Kids / Strep Throat What's in this article? What Is ...

Triple Scoop from Galaxy Hunter

NASA Image and Video Library

2006-07-28

Located 10 million light-years away in the southern constellation Sculptor, the Silver Dollar galaxy, or NGC 253, is one of the brightest spiral galaxies in the night sky as seen in this edge-on view from NASA Galaxy Evolution Explorer.

Signs of Perchlorates and Sulfur Containing Compounds

NASA Image and Video Library

2012-12-03

NASA Mars rover Curiosity has detected sulfur, chlorine, and oxygen compounds in fine grains scooped by the rover at a wind drift site called Rocknest. The grains were heated and analyzed using the rover Sample Analysis at Mars instrument suite.

Characterising and improving the performance of the Sentinel-3 SRAL altimeter: A Report from SCOOP, SHAPE & SPICE Projects

NASA Astrophysics Data System (ADS)

Restano, Marco; Ambrózio, Américo; Cotton, David; Scoop Team; Fabry, Pierre; Shape Team; McMillan, Malcolm; Spice Team; Benveniste, Jérôme

2017-04-01

Under the ESA Scientific Exploitation of Operational Missions (SEOM) Programme, 3 Projects are currently underway to accurately characterise and improve the performance of the Sentinel-3 SRAL SAR mode altimeter. They are: 1) SCOOP (SAR Altimetry Coastal & Open Ocean Performance Exploitation and Roadmap Study) for Coastal and Open Ocean; 2) SHAPE (Sentinel-3 Hydrologic Altimetry PrototypE) for Inland Water; 3) SPICE (Sentinel-3 Performance improvement for ICE sheets) for Ice Sheets. As projects started before the launch of Sentinel-3 (a full SAR mission), calibrated Cryosat-2 data have been used as input to a processor replicating the Sentinel-3 baseline processing. For the SCOOP project, a first test dataset has been released to end users including data from 10 regions of interest. The successful SAMOSA retracker, adopted in the previous CP4O Project (CryoSat Plus for Oceans), has been readapted to re-track Sentinel-3 waveforms. An improved version of SAMOSA will be released at the end of the project. The SHAPE project is working towards the design and assessment of alternative/innovative techniques not implemented in the Sentinel-3 ground segment (performing no Inland Water dedicated processing). Both rivers and lakes will be studied. Amazon, Brahmaputra and Danube have been selected as rivers, whereas Titicaca and Vanern have been chosen as lakes. The study will include the assimilation of output products into hydrological models for all regions of interest. A final dataset will be provided to end users. The SPICE project is addressing four high level objectives: 1) Assess and improve the Delay-Doppler altimeter processing for ice sheets. 2) Assess and develop SAR waveform retrackers for ice sheets. 3) Evaluate the performance of SAR altimetry relative to conventional pulse limited altimetry. 4) Assess the impact on SAR altimeter measurements of radar wave interaction with the snowpack. Dataset used for validation include ICESat and IceBridge products. Vostok, Dome C and the Spirit Sector (all located in Antarctica) have been selected, along with the Russell Glacier in Greenland, as regions of interest. In the frame of both SCOOP and SHAPE projects, improved wet troposphere corrections will be estimated for all regions of interest.

A nurse-led model at public academic hospitals maintains high adherence to colorectal cancer surveillance guidelines.

PubMed

Symonds, Erin L; Simpson, Kalindra; Coats, Michelle; Chaplin, Angela; Saxty, Karen; Sandford, Jayne; Young Am, Graeme P; Cock, Charles; Fraser, Robert; Bampton, Peter A

2018-06-18

To examine the compliance of colorectal cancer surveillance decisions for individuals at greater risk with current evidence-based guidelines and to determine whether compliance differs between surveillance models. Prospective auditing of compliance of surveillance decisions with evidence-based guidelines (NHMRC) in two decision-making models: nurse coordinator-led decision making in public academic hospitals and physician-led decision making in private non-academic hospitals. Selected South Australian hospitals participating in the Southern Co-operative Program for the Prevention of Colorectal Cancer (SCOOP). Proportions of recall recommendations that matched NHMRC guideline recommendations (March-May 2015); numbers of surveillance colonoscopies undertaken more than 6 months ahead of schedule (January-December 2015); proportions of significant neoplasia findings during the 15 years of SCOOP operation (2000-2015). For the nurse-led/public academic hospital model, the recall interval recommendation following 398 of 410 colonoscopies (97%) with findings covered by NHMRC guidelines corresponded to the guideline recommendations; for the physician-led/private non-academic hospital model, this applied to 257 of 310 colonoscopies (83%) (P < 0.001). During 2015, 27% of colonoscopies in public academic hospitals (mean, 27 months; SD, 13 months) and 20% of those in private non-academic hospitals (mean, 23 months; SD, 12 months) were performed more than 6 months earlier than scheduled, in most cases because of patient-related factors (symptoms, faecal occult blood test results). The ratio of the numbers of high risk adenomas to cancers increased from 6.6:1 during 2001-2005 to 16:1 during 2011-2015. The nurse-led/public academic hospital model for decisions about colorectal cancer surveillance intervals achieves a high degree of compliance with guideline recommendations, which should relieve burdening of colonoscopy resources.

WINCOF-I code for prediction of fan compressor unit with water ingestion

NASA Technical Reports Server (NTRS)

Murthy, S. N. B.; Mullican, A.

1990-01-01

The PURDUE-WINCOF code, which provides a numerical method of obtaining the performance of a fan-compressor unit of a jet engine with water ingestion into the inlet, was modified to take into account: (1) the scoop factor, (2) the time required for the setting-in of a quasi-steady distribution of water, and (3) the heat and mass transfer processes over the time calculated under 2. The modified code, named WINCOF-I was utilized to obtain the performance of a fan-compressor unit of a generic jet engine. The results illustrate the manner in which quasi-equilibrium conditions become established in the machine and the redistribution of ingested water in various stages in the form of a film out of the casing wall, droplets across the span, and vapor due to mass transfer.

77 FR 25741 - Notice of Inventory Completion: Arizona State Museum, University of Arizona, Tucson, AZ

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-01

... through the survey collection was conducted in 2010. One human bone fragment from the Adamsville site... ceramic jars, 1 ceramic scoop, 5 ceramic sherds, 4 pieces of chipped stone, and 1 flotation sample. Las...

JPL-19680109-SURVEYf-0001-AVC2002083 Surveyor 7 Lands on Moon

NASA Image and Video Library

1968-01-09

Surveyor 7 was the last of the original series of Surveyor Moon landers. Includes images of scoop digging in the lunar soil. It was the only spacecraft of the series to land in the lunar highland region.

An Investigation of the Effects of Nose and Lip Shapes for an Underslung Scoop Inlet at Mach Numbers from 0 to 1.9

NASA Technical Reports Server (NTRS)

Pfyl, Frank A.

1955-01-01

An experimental investigation was conducted to determine the performance characteristics an underslung nose-scoop air-induction system for a supersonic airplane. Five different nose shapes, three lip shapes, and two internal diffusers were investigated. Tests were made at Mach numbers from 0 to 1.9, angles of attack from 0 deg to approximately l5 deg, and mass-flow ratios from 0 to maximum obtainable. It was found that the underslung nose-scoop inlet was able to operate at Mach numbers from 0.6 to 1.9 over a large positive angle-of-attack range without adverse effects on the pressure recovery. Although there was no one inlet configuration that was markedly superior over the entire range of operating variables, the arrangement having a nose designed to give increased supersonic compression at low angles of attack, and a sharp lip (configuration designated N3L3) showed the most favorable performance characteristics over the supersonic Mach number range. Inlets with sizable lip radii gave satisfactory performance up to a Mach number of 1.5; however, as a result of an increase in drag, the performance of such inlets was markedly inferior to the sharp-lip configuration above Mach numbers of 1.5. Throughout the range of test Mach numbers all inlet configurations evidenced stable air-flow characteristics over the mass-flow range for normal engine operation. Analysis of the inlet performance on the basis of a propulsive thrust parameter showed that a fixed inlet area could be used for Mach numbers up to 1.5 with only a small sacrifice in performance.

A Study on an Analysis and Design of the Internal Structure of Heumgyeonggak-nu

NASA Astrophysics Data System (ADS)

Kim, Sang Hyuk; Yun, Yong-Hyun; Ham, Seon Young; Mihn, Byeong-Hee; Ki, Ho-Chul; Yoon, Myung-Kyoon

2017-06-01

In this study, the internal structure of a Heumgyeonggak-nu (欽敬閣漏) was designed, and the power transmission mechanism was analyzed. Heumgyeonggak-nu is an automated water clock from the Joseon Dynasty that was installed within Heumgyeonggak (欽敬閣), and it was manufactured in the 20th year of the reign of King Sejong (1438). As descriptions of Heumgyeonggak-nu in ancient literature have mostly focused on its external shape, the study of its internal mechanism has been difficult. A detailed analysis of the literature record on Heumgyeonggak-nu (e.g., The Annals of the Joseon Dynasty) indicates that Heumgyeonggaknu had a three-stage water clock, included a waterfall or tilting vessel (欹器) using the overflowed water, and displayed the time using a ball. In this study, the Cheonhyeong apparatus, water wheel, scoop, and various mechanism wheels were designed so that 16 fixed-type scoops could operate at a constant speed for the water wheel with a diameter of 100 cm. As the scoop can contain 1.25 l of water and the water wheel rotates 61 times a day, a total of 1,220 l of water is required. Also, the power gear wheel was designed as a 366-tooth gear, which supported the operation of the time signal gear wheel. To implement the movement of stars on the celestial sphere, the rotation ratio of the celestial gear wheel to the diurnal motion gear ring was set to 366:365. In addition, to operate the sun movement apparatus on the ecliptic, a gear device was installed on the South Pole axis. It is expected that the results of this study can be used for the manufacture and restoration of the operation model of Heumgyeonggak-nu.

Experimental and theoretical studies on the gas/solid/gas transformation cycle in extraterrestrial environments

NASA Astrophysics Data System (ADS)

Cottin, Hervé; Gazeau, Marie-Claire; Chaquin, Patrick; Raulin, François; Bénilan, Yves

2001-12-01

The ubiquity of molecular material in the universe, from hydrogen to complex organic matter, is the result of intermixed physicochemical processes that have occurred throughout history. In particular, the gas/solid/gas phase transformation cycle plays a key role in chemical evolution of organic matter from the interstellar medium to planetary systems. This paper focuses on two examples that are representative of the diversity of environments where such transformations occur in the Solar System: (1) the photolytic evolution from gaseous to solid material in methane containing planetary atmospheres and (2) the degradation of high molecular weight compounds into gas phase molecules in comets. We are currently developing two programs which couple experimental and theoretical studies. The aim of this research is to provide data necessary to build models in order to better understand (1) the photochemical evolution of Titan's atmosphere, through a laboratory program to determine quantitative spectroscopic data on long carbon chain molecules (polyynes) obtained in the SCOOP program (French acronym for Spectroscopy of Organic Compounds Oriented for Planetology), and (2) the extended sources in comets, through a laboratory program of quantitative studies of photochemical and thermal degradation processes on relevant polymers (e.g., Polyoxymethylene) by the SEMAPhOrE Cometaire program (French acronym for Experimental Simulation and Modeling Applied to Organic Chemistry in Cometary Environment).

Kindergarten Explorations with Snow, Ice, and Water

ERIC Educational Resources Information Center

Carroll, Martha A.

1978-01-01

Using winter snow, kindergarten students can explore the properties of water. Students demonstrate melting, freezing, expansion, and evaporation through a number of activities involving a paper cup and a scoop of snow. Procedures and student reactions are described in detail by the teacher-author. (MA)

Mars Science Laboratory Sample Acquisition, Sample Processing and Handling Subsystem: A Description of the Sampling Functionality

NASA Astrophysics Data System (ADS)

Jandura, L.; Burke, K.; Kennedy, B.; Melko, J.; Okon, A.; Sunshine, D.

2009-12-01

The Sample Acquisition/Sample Processing and Handling (SA/SPaH) subsystem for the Mars Science Library (MSL) is a rover-based sampling system scheduled to launch in 2011. The SA/SPaH consists of a powdering drill and a scooping, sieving, and portioning device mounted on a turret at the end of a robotic arm. Also on the turret is a dust removal tool for clearing the surface of scientific targets, and two science instruments mounted on vibration isolators. The SA/SPaH can acquire powder from rocks at depths of 20 to 50 mm and can also pick up loose regolith with its scoop. The acquired sample is sieved and portioned and delivered to one of two instruments inside the rover for analysis. The functionality of the system will be described along with the targets the system can acquire and the sample that can be delivered. Top View of the SA/SPaH on the Rover

After Attempted Sample Delivery on Sol 60, False Color

NASA Technical Reports Server (NTRS)

2008-01-01

This view from the Surface Stereo Imager on NASA's Phoenix Mars Lander on the mission's 60th Martian day, or sol, (July 26, 2008) was taken after the lander's scoop sprinkled a soil sample over Thermal and Evolved-Gas Analyzer (TEGA).

The upper part of the picture shows the robotic arm scoop parked open-face down above the TEGA after delivery. The TEGA doors farthest to the right were open to receive the sample into one of TEGA's eight ovens. Not enough material reached the oven to allow an analysis to begin. Some of the soil sample can be seen at the bottom of the adjacent pair of doors.

This view is presented in false color, which makes the reddish color of the soil-sample material easy to see.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Detection of Organic Constituents Including Chloromethylpropene in the Analyses of the ROCKNEST Drift by Sample Analysis at Mars (SAM)

NASA Technical Reports Server (NTRS)

Eigenbrode, J. L.; Glavin, D.; Coll, P.; Summons, R. E.; Mahaffy, P.; Archer, D.; Brunner, A.; Conrad, P.; Freissinet, C.; Martin, M.;

The Scoop on Good Humor.

ERIC Educational Resources Information Center

Pieper, Gail W.

1987-01-01

Recommends teaching about the uses of humor in technical writing classes by using computer user manuals. Suggests that humor has a place in technical communication, particularly in computer manuals, where new users' apprehension must be reduced, heavy technical points need clarification, and warnings and cautions should be reinforced. (SKC)

Using Technology To Enhance Literacy in Elementary School Children.

ERIC Educational Resources Information Center

Christie, Alice

The electronic information age is here, and adults as well as children are using new ways to gather and generate information. Electronics users are writing in hypertext; exploring cyberspace; living in virtual communities; scooping interactively with CD-ROMs and laserdiscs; using File Transfer Protocols to upload and download information from…

46 CFR 190.15-5 - Vessels using fuel having a flashpoint of 110 °F. or lower.

Code of Federal Regulations, 2010 CFR

2010-10-01

... water in the bilge will not close off the ducts. (g) All ducts shall be of steel construction and... or scoops shall be kept open at all times except when the stress of weather is such as to endanger...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mumford, S.E.; Smed, J.P.

This patent describes a gas turbine combustion chamber. It comprises: means for admission of fuel to the upstream end thereof and discharge of hot gases from the downstream end thereof, and a combustion chamber wall, having an outer surface, with apertures therethrough, and air scoops provided through the apertures to direct air into the combustion chamber.

Partnerships in Social Work Education

ERIC Educational Resources Information Center

Pierce, Joanna Lina; Hemingway, Dawn; Schmidt, Glen

2014-01-01

Historically, society has associated a visit from a child protection worker with the removal of children. In Canada in the 1960s, Aboriginal children were removed from their communities in alarming numbers and were referred to as the "sixties scoop." This may in part explain the difficulty in recruiting Aboriginal social workers into…

7 CFR 58.419 - Curd mill and miscellaneous equipment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... metal particles. The wires in the curd knives shall be stainless steel, kept tight and replaced when..., shovels, scoops, paddles, strainers, and miscellaneous equipment shall be stainless steel or of material... of the curd mill should be of stainless steel. All pieces of equipment shall be so constructed that...

7 CFR 58.419 - Curd mill and miscellaneous equipment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... metal particles. The wires in the curd knives shall be stainless steel, kept tight and replaced when..., shovels, scoops, paddles, strainers, and miscellaneous equipment shall be stainless steel or of material... of the curd mill should be of stainless steel. All pieces of equipment shall be so constructed that...

Fund Balances: What Flavors and How Many Scoops Are Appropriate?

ERIC Educational Resources Information Center

Piotrowski, Craig L.

1986-01-01

Just as ice cream comes in many flavors for different tastes, fund balances need to be reserved and designated to meet school district plans and commitments. This article examines accounting principles and other issues determining the segregation and size of a school district's fund balance, a legally restricted reserve that can affect the…

ARC-1969-A-16545

NASA Image and Video Library

1951-10-01

YF-93A (AF48-318 NACA-151) Flight evaluation and comparison of a NACA submerged inlet and a scoop inlet. The YF-93A's were the first aircraft to use flush NACA engine inlets. Note: Used in Flight Research at Ames; 57 Years of Development and Validation of Aeronautical Technology NASA SP-1998-3300 Fig.25

2007 Heartland Security Conference and Exhibition - Technology for Defense and Homeland Security Readiness

DTIC Science & Technology

2007-07-11

Corn Oil High Fructose Corn Syrup Gluten Meal Gluten Feed Starch Wet Feed Germ Meal Gluten Condensed Corn Fermented Extractives Energy...nuts. "Pigs can be picky eaters," Mr. Smith says, scooping a handful of banana chips, yogurt -covered raisins, dried papaya and cashews from one of

The Total-Pressure Recovery and Drag Characteristics of Several Auxiliary Inlets at Transonic Speeds

NASA Technical Reports Server (NTRS)

Dennard, John S.

1959-01-01

Several flush and scoop-type auxiliary inlets have been tested for a range of Mach numbers from 0.55 to 1.3 to determine their transonic total-pressure recovery and drag characteristics. The inlet dimensions were comparable with the thickness of the boundary layer in which they were tested. Results indicate that flush inlets should be inclined at very shallow angles with respect to the surface for optimum total-pressure recovery and drag characteristics. Deep, narrow inlets have lower drag than wide shallow ones at Mach numbers greater than 0.9 but at lower Mach numbers the wider inlets proved superior. Inlets with a shallow approach ramp, 7 deg, and diverging ramp walls which incorporated boundary-layer bypass had lower drag than any other inlet tested for Mach numbers up to 1.2 and had the highest pressure recovery of all of the flush inlets. The scoop inlets, which operated in a higher velocity flow than the flush inlets, had higher drag coefficients. Several of these auxiliary inlets projected multiple, periodic shock waves into the stream when they were operated at low mass-flow ratios.

Icing-Protection Requirements for Reciprocating-Engine Induction System

NASA Technical Reports Server (NTRS)

Coles, Willard D; Rollin, Vern G; Mulholland, Donald R

1950-01-01

Despite the development of relatively ice-free fuel-metering systems, the widespread use of alternate and heated-air intakes, and the use of alcohol for emergency de-icing, icing of aircraft-engine induction systems is a serious problem. Investigations have been made to study and to combat all phases of this icing problem. From these investigations, criterions for safe operation and for design of new induction systems have been established. The results were obtained from laboratory investigations of carburetor-supercharger combinations, wind-tunnel investigations of air scoops, multicylinder-engine studies, and flight investigations. Characteristics of three forms of ice, impact, throttling, and fuel evaporation were studied. The effects of several factors on the icing characteristics were also studied and included: (1) atmospheric conditions, (2) engine and air-scoop configurations, including light-airplane system, (3) type fuel used, and (4) operating variables, such as power condition, use of a manifold pressure regulator, mixture setting, carburetor heat, and water-alcohol injection. In addition, ice-detection methods were investigated and methods of preventing and removing induction-system ice were studied. Recommendations are given for design and operation with regard to induction-system design.

Symmetrical compression distance for arrhythmia discrimination in cloud-based big-data services.

PubMed

Lillo-Castellano, J M; Mora-Jiménez, I; Santiago-Mozos, R; Chavarría-Asso, F; Cano-González, A; García-Alberola, A; Rojo-Álvarez, J L

2015-07-01

The current development of cloud computing is completely changing the paradigm of data knowledge extraction in huge databases. An example of this technology in the cardiac arrhythmia field is the SCOOP platform, a national-level scientific cloud-based big data service for implantable cardioverter defibrillators. In this scenario, we here propose a new methodology for automatic classification of intracardiac electrograms (EGMs) in a cloud computing system, designed for minimal signal preprocessing. A new compression-based similarity measure (CSM) is created for low computational burden, so-called weighted fast compression distance, which provides better performance when compared with other CSMs in the literature. Using simple machine learning techniques, a set of 6848 EGMs extracted from SCOOP platform were classified into seven cardiac arrhythmia classes and one noise class, reaching near to 90% accuracy when previous patient arrhythmia information was available and 63% otherwise, hence overcoming in all cases the classification provided by the majority class. Results show that this methodology can be used as a high-quality service of cloud computing, providing support to physicians for improving the knowledge on patient diagnosis.

A Fairy-Tale Landscape

NASA Technical Reports Server (NTRS)

2008-01-01

[figure removed for brevity, see original site] Click on image for animation

Fun, fairy-tale nicknames have been assigned to features in this animated view of the workspace reachable by the robotic arm of NASA's Phoenix Mars Lander. For example, 'Sleepy Hollow' denotes a trench and 'Headless' designates a rock.

A 'National Park,' marked by purple text and a purple arrow, has been set aside for protection until scientists and engineers have tested the operation of the robotic scoop. First touches with the scoop will be to the left of the 'National Park' line.

Scientists use such informal names for easy identification of features of interest during the mission.

In this view, rocks are circled in yellow, other areas of interest in green. The images were taken by the lander's 7-foot mast camera, called the Surface Stereo Imager.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

First Sample Delivery to Mars Microscope

NASA Technical Reports Server (NTRS)

2008-01-01

The Robotic Arm on NASA's Phoenix Mars Lander has just delivered the first sample of dug-up soil to the spacecraft's microscope station in this image taken by the Surface Stereo Imager during the mission's Sol 17 (June 12), or 17th Martian day after landing.

The scoop is positioned above the box containing key parts of Phoenix's Microscopy, Electrochemistry and Conductivity Analyzer, or MECA, instrument suite. It has sprinkled a small amount of soil into a notch in the MECA box where the microscope's sample wheel is exposed. The wheel turns to present sample particles on various substrates to the Optical Microscope for viewing.

The scoop is about 8.5 centimeters (3.3 inches) wide. The top of the MECA box is 20 centimeters (7.9 inches) wide. This image has been lightened to make details more visible.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Modeling 3-D Slope Stability of Coastal Bluffs Using 3-D Ground-Water Flow, Southwestern Seattle, Washington

USGS Publications Warehouse

Brien, Dianne L.; Reid, Mark E.

2007-01-01

Landslides are a common problem on coastal bluffs throughout the world. Along the coastal bluffs of the Puget Sound in Seattle, Washington, landslides range from small, shallow failures to large, deep-seated landslides. Landslides of all types can pose hazards to human lives and property, but deep-seated landslides are of significant concern because their large areal extent can cause extensive property damage. Although many geomorphic processes shape the coastal bluffs of Seattle, we focus on large (greater than 3,000 m3), deepseated, rotational landslides that occur on the steep bluffs along Puget Sound. Many of these larger failures occur in advance outwash deposits of the Vashon Drift (Qva); some failures extend into the underlying Lawton Clay Member of the Vashon Drift (Qvlc). The slope stability of coastal bluffs is controlled by the interplay of three-dimensional (3-D) variations in gravitational stress, strength, and pore-water pressure. We assess 3-D slope-stability using SCOOPS (Reid and others, 2000), a computer program that allows us to search a high-resolution digital-elevation model (DEM) to quantify the relative stability of all parts of the landscape by computing the stability and volume of thousands of potential spherical failures. SCOOPS incorporates topography, 3-D strength variations, and 3-D pore pressures. Initially, we use our 3-D analysis methods to examine the effects of topography and geology by using heterogeneous material properties, as defined by stratigraphy, without pore pressures. In this scenario, the least-stable areas are located on the steepest slopes, commonly in Qva or Qvlc. However, these locations do not agree well with observations of deep-seated landslides. Historically, both shallow colluvial landslides and deep-seated landslides have been observed near the contact between Qva and Qvlc, and commonly occur in Qva. The low hydraulic conductivity of Qvlc impedes ground-water flow, resulting in elevated pore pressures at the base of Qva, thereby increasing the potential for landslides. Our analysis simulates the ground-water flow using the results of a 3-D ground-water flow model, MODFLOW-2000 (Harbaugh and others, 2000), to generate a 3-D pore-pressure field. Areas of elevated pore pressure reflect the influence of a perched ground-water table in Qva, as well as ground-water convergence in the coastal re-entrants. We obtain a realistic model of deep-seated landsliding by combining 3-D pore pressures with heterogeneous strength properties. The results show the least-stable areas where pore pressures are locally elevated in Qva. We compare our results with records of past landslides. The predicted leaststable areas include two historically active deep-seated landslides and areas adjacent to these landslides.

Infant & Toddlers: How to Calm an Exuberant Baby

ERIC Educational Resources Information Center

Honig, Alice Sterling

2006-01-01

It is important to understand that babies differ in temperament. Some are sensationally exuberant and loud. Others are more withdrawn and quiet. Babies also differ in tempo and style. Some eat with gusto. Others deliberately scoop a bit of cooked cereal onto a spoon and slowly munch on their food. Helping a baby learn to modulate voice tones means…

21 CFR 177.1950 - Vinyl chloride-ethylene copolymers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... clean 22-milliliter Parr cup, also on the steam plate. The solution is evaporated to dryness. Next 0.25 gram of sucrose and 0.5 gram of benzoic acid are added to the cup. One scoop (approximately 15 grams) of sodium peroxide is then added to the cup. The bomb is assembled and ignition is conducted in the...

What's the Scoop on Autism Spectrum Disorders and Nutrition?

ERIC Educational Resources Information Center

Wallace, Lee Shelly

2009-01-01

There is much discussion among families about the relationship between nutrition and autism spectrum disorder (ASD). There are claims of diets that will "cure" ASD: gluten-free, casein-free, specific carbohydrate diet (SCD). There are claims of benefits by adding nutrients to the diet, such as vitamin B-6 and magnesium, vitamin B-12, or essential…

ISS/IDS Detector Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cervera-Villanueva, A.

2008-02-21

This article summarises the results obtained by the detector working group of the 'International Scooping Study' (ISS) of a future neutrino oscillations facility. Special emphasis is put on far detectors, for which some of the main issues are identified. A detector R and D strategy in the context of the 'International Design Study' (IDS) for a neutrino factory is also presented.

A Safe and Effective Modification of Thomson's Jumping Ring Experiment

ERIC Educational Resources Information Center

Waschke, Felix; Strunz, Andreas; Meyn, Jan-Peter

2012-01-01

The electrical circuit of the jumping ring experiment based on discharging a capacitor is optimized. The setup is scoop proof at 46 V and yet the ring jumps more than 9 m high. The setup is suitable for both lectures and student laboratory work in higher education. (Contains 1 table, 8 figures and 3 footnotes.)

Boosting Engagement and Growth with Formative Assessment: Leaders Share Their Lessons

ERIC Educational Resources Information Center

Northwest Evaluation Association, 2016

2016-01-01

Our featured leaders saw big gains when their teachers began using formative assessment practice to guide student growth minute-by-minute. Read the fourth article in our five-part series for the scoop on how committing to this high-impact instructional practice paid off for a regional agency, district, and school. Learn: (1) why our featured…

Research Technology

NASA Image and Video Library

2004-04-15

The Boussard Interstellar Ramjet engine concept uses interstellar hydrogen scooped up from its environment as the spacecraft passes by to provide propellant mass. The hydrogen is then ionized and then collected by an electromagentic field. In this image, an onboard laser is uded to heat the plasma, and the laser or electron beam is used to trigger fusion pulses thereby creating propulsion.

College Degrees, Designed by the Numbers

ERIC Educational Resources Information Center

Parry, Marc

2012-01-01

Data mining hinges on one reality about life on the Web: What you do there leaves behind a trail of digital bread crumbs. Companies scoop them up to tailor services, like the matchmaking of eHarmony or the book recommendations of Amazon. Now colleges, eager to get students out the door more efficiently, are awakening to the opportunities of…

KSC-02pd0553

NASA Image and Video Library

2002-04-07

KENNEDY SPACE CENTER, FLA. -- Roseate Spoonbills march alongside a pool of water near KSC. The birds, named for their brilliant pink color and paddle-shaped bill, usually feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. [Photo by Mike Brown

KSC-99pc15

NASA Image and Video Library

1999-01-05

KENNEDY SPACE CENTER, FLA. -- A roseate spoonbill feeds alongside a canal in the Merritt Island National Wildlife Refuge. The birds are named for their brilliant pink color and paddle-shaped bill and feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas

Simplified Recipes for Day Care Centers.

ERIC Educational Resources Information Center

Asmussen, Patricia D.

The spiral-bound collection of 156 simplified recipes is designed to help those who prepare food for groups of children at day care centers. The recipes provide for 25 child-size servings to meet the nutritional needs and appetites of children from 2 to 6 years of age. The first section gives general information on ladle and scoop sizes, weights…

Study of sample drilling techniques for Mars sample return missions

NASA Technical Reports Server (NTRS)

Mitchell, D. C.; Harris, P. T.

1980-01-01

To demonstrate the feasibility of acquiring various surface samples for a Mars sample return mission the following tasks were performed: (1) design of a Mars rover-mounted drill system capable of acquiring crystalline rock cores; prediction of performance, mass, and power requirements for various size systems, and the generation of engineering drawings; (2) performance of simulated permafrost coring tests using a residual Apollo lunar surface drill, (3) design of a rock breaker system which can be used to produce small samples of rock chips from rocks which are too large to return to Earth, but too small to be cored with the Rover-mounted drill; (4)design of sample containers for the selected regolith cores, rock cores, and small particulate or rock samples; and (5) design of sample handling and transfer techniques which will be required through all phase of sample acquisition, processing, and stowage on-board the Earth return vehicle. A preliminary design of a light-weight Rover-mounted sampling scoop was also developed.

College 411: Get the Scoop. A Small Group Plan to Promote College Success for First-Generation College Students

ERIC Educational Resources Information Center

Land, Christy W.; Ziomek-Daigle, Jolie

2013-01-01

First generation college students have more difficulty preparing for and succeeding in post-secondary institutions. Informed by the literature review and relevant research the school counselor presents a small group design for high school students in their junior year. This small group plan for first generation college students addresses issues of…

The Effects of the Strength and Number of Visual Mediators in the Learning Process. Final Report.

ERIC Educational Resources Information Center

Bolz, Charles R.; Ackerman, Jerrold

The role of visual imagery in the learning of letter-sound combinations was investigated using such mediating images as two scoops of ice cream for the letter "m." In a preliminary study, high-, medium-, and low-strength mediating images were determined for each letter-sound combination. The 216 kindergarten subjects in the main study were…

The Pacific Northwest Research Station biodiversity initiative: scooping out the challenges in managing for biodiversity.

Treesearch

Rachel White; Randy Molina

2006-01-01

The USDA Forest Service Pacific Northwest Research Station's Biodiversity Initiative seeks to determine the types of science tools needed by natural resource professionals to meet diverse and complex biodiversity goals. During the scoping phase of this Initiative, we asked a broad cross-section of people whose work involves managing for biodiversity, from state...

KSC-02pd0550

NASA Image and Video Library

2002-04-07

KENNEDY SPACE CENTER, FLA. -- A Roseate Spoonbill takes flight. The colorful birds are seen often throughout KSC and nearby wetlands. The birds, named for their brilliant pink color and paddle-shaped bill, usually feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. [Photo by Mike Brown

Hey There Edgar Snow, What Happened to the Red Star over Yan'an?

ERIC Educational Resources Information Center

Boshier, Roger; Huang, Yan

2008-01-01

Edgar Snow scored an extraordinary scoop in 1936 when he persuaded Mao Zedong to tell his story. The resulting book--"Red Star Over China"--was a best-seller in the West and translated editions caused a sensation in China. Adult education was the centrepiece of Communist revolution and featured prominently in Red Star. It is now the…

Rotary Apparatus Concentrates And Separates Micro-Organisms

NASA Technical Reports Server (NTRS)

Noever, David A.

1992-01-01

Apparatus concentrates and separates swimming micro-organisms of different species into concentric rings in fluid. Fluid containing high concentration of desired species removed by use of small scoop placed into fluid at radius of one of rings formed by that species. Micro-organisms concentrated into concentric rings by combined dynamic effects of upward and horizontal components of swimming, rotation of dish, gravitation, and viscosity.

Informational Interviewing: Get the Inside Scoop on Careers

ERIC Educational Resources Information Center

Crosby, Olivia

2010-01-01

Many people wonder anxiously about which type of job they'll like or how they can break into the career of their dreams. Surprisingly, very few people ever take advantage of one of the best ways to answer their questions about careers: asking the workers already in them. Talking to people about their jobs and asking them for advice is called…

Law Schools Customize Degrees to Students' Taste

ERIC Educational Resources Information Center

Schmidt, Peter

2009-01-01

Going to law school to get a law degree has become a little like going to an ice-cream parlor for a scoop of vanilla. Plenty of people still do it, but many schools' brochures--like the elaborate flavor-and-topping menus on ice-cream parlor walls--now tempt them with something different, something more. Law students can have their "juris doctor"…

10 CFR Appendix B to Part 110 - Illustrative List of Gas Centrifuge Enrichment Plant Components Under NRC's Export Licensing...

Code of Federal Regulations, 2010 CFR

2010-01-01

... materials of construction for the rotating rotor assembly, and hence its individual components, have to be... gas centrifuge for uranium enrichment is characterized by having within the rotor chamber a rotating... featuring at least 3 separate channels of which 2 are connected to scoops extending from the rotor axis...

Got the Inside Scoop on For-Profits? Investors Will Pay--and Handsomely

ERIC Educational Resources Information Center

Blumenstyk, Goldie

2011-01-01

Not all talk is cheap. Especially not if it comes from the mouths of professors, former corporate executives, or Washington insiders who understand the workings of the $20-billion for-profit higher-education industry and how impending tougher regulations might affect it. Then the talk can be worth hundreds of dollars an hour, thanks to the growing…

Laser scoop desobliteration: a method for minimally invasive remote recanalization of chronically occluded superficial femoral arteries

NASA Astrophysics Data System (ADS)

Heneweer, Carola; Siggelkow, Markus; Helle, Michael; Petzina, Rainer; Wulff, Asmus; Schaefer, Joost P.; Berndt, Rouven; Rusch, Rene; Wedel, Thilo; Klaws, Guenther; Müller-Gerbl, Magdalena; Röcken, Christoph; Jansen, Olav; Lutter, Georg; Cremer, Joachim; Groß, Justus

2015-02-01

Stenosis and occlusion of the superficial femoral artery (SFA) are most common in arterial occlusive disease. There are numerous interventional, surgical, and combined approaches to reconstitute maximum blood supply to the lower limb; however, despite intense clinical research, the long-term success rates are still poor. We present the first results with a catheter prototype for laser-based minimal invasive endarterectomy, called laser scoop desobliteration (LSD). The tip of a glass fiber containing a catheter was modified with a spatula head design and connected to an ultraviolet laser. It was tested in cadavers fixed with the Thiel embalming technique preserving tissue consistency, flexibility, and plasticity. After longitudinal arteriotomy of the SFA, a circular dissection between media and adventitia was performed. Then the LSD catheter was inserted and propagated with a progress of 1 mm/s. Afterward, the atheroma core, which showed a plain surface without substantial attaching tissue debris, was removed. Histological examination of the vessel wall showed that the dissection was performed at the media/adventitia interface. In summary, the constructed LSD catheter allowed a rapid and easy way to perform an endarterectomy, thereby offering an innovative approach in the treatment of chronic occluded SFA.

Evidence of a specialized feeding niche in a Late Triassic ray-finned fish: evolution of multidenticulate teeth and benthic scraping in †Hemicalypterus.

PubMed

Gibson, Sarah Z

2015-04-01

Fishes have evolved to exploit multiple ecological niches. Extant fishes in both marine (e.g., rabbitfishes, surgeonfishes) and freshwater systems (e.g., haplochromine cichlids, characiforms) have evolved specialized, scoop-like, multidenticulate teeth for benthic scraping, feeding primarily on algae. Here, I report evidence of the oldest example of specialized multidenticulate dentition in a ray-finned fish, †Hemicalypterus weiri, from the Upper Triassic Chinle Formation of southeastern Utah (∼210-205 Ma), USA. †H. weiri is a lower actinopterygian species that is phylogenetically remote from modern fishes, and has evolved specialized teeth that converge with those of several living teleost fishes (e.g., characiforms, cichlids, acanthurids, siganids), with a likely function of these teeth being to scrape algae off a rock substrate. This finding contradicts previously held notions that fishes with multicuspid, scoop-like dentition were restricted to teleosts, and indicates that ray-finned fishes were diversifying into different trophic niches and exploring different modes of feeding earlier in their history than previously thought, fundamentally altering our perceptions of the ecological roles of fishes during the Mesozoic.

Numerical study of innovative scramjet inlets coupled to combustors using hydrocarbon-air mixture

NASA Astrophysics Data System (ADS)

Malo-Molina, Faure Joel

The research objective is to use high-fidelity multi-physics Computational Fluid Dynamics (CFD) analysis to characterize 3-D scramjet flowfields in two novel streamline traced circular configurations without axisymmetric profiles. This work builds on a body of research conducted over the past several years. In addition, this research provides the modeling and simulation support, prior to ground (wind tunnel) and flight experiment programs. Two innovative inlets, Jaws and Scoop, are analyzed and compared to a Baseline inlet, a current state of the art rectangular inlet used as a baseline for on/off-design conditions. The flight trajectory conditions selected were Mach 6 and a dynamic pressure of 1,500 psf (71.82 kPa), corresponding to a static pressure of 43.7 psf (2.09 kPa) and temperature of 400.8 R° (222.67 C°). All inlets are designed for equal flight conditions, equal contraction ratios and exit cross-sectional areas, thus facilitating their comparison and integration to a common combustor design. Analysis of these hypersonic inlets was performed to investigate distortion effects downstream in common generic combustors. These combustors include a single cavity acting as flame holder and strategically positioned fuel injection ports. This research not only seeks to identify the most successful integrated scramjet inlet/combustor design, but also investigates the flow physics and quantifies the integrated performance impact of the two novel scramjet inlet designs. It contributes to the hypersonic air-breathing community by providing analysis and predictions on directly-coupled combustor numerical experiments for developing pioneering inlets or nozzles for scramjets. Several validations and verifications of General Propulsion Analysis Chemical-kinetic and Two-phase (GPACT), the CFD tool, were conducted throughout the research. In addition, this study uses 13 gaseous species and 20 reactions for an Ethylene/air finite-rate chemical model. The key conclusions of this research are: (1) Flow distortion in the innovative inlets is similar to some of the distortion in the Baseline inlet, despite design differences. In both innovative inlets, the resulting flowfield distortions were due to shock boundary layer interactions similar to those found in the Baseline. The Baseline and Jaws performance attributes are stronger than Scoop, but Jaws accomplishes this while eradicating the cowl lip interaction, and lessening the total drag and spillage penalties. (2) The innovative inlets work best on-design, whereas for off-design, the traditional inlet yields a higher performance. Although the innovative inlets' designs mitigated some of the issues encountered in traditional configurations, they underperform at off-design conditions. The strategy used in Jaws was less prone to interaction with the near wall flow, and yields lesser pressure losses and higher efficiency at on-design conditions compared to the others. In general, the overall values for Scoop seem lowest of all due to lesser entrainment. Its drag coefficient and thrust to mass capture ratios are higher than the Baseline configuration. (3) Early pressure losses and flow distortions actually aid downstream combustion in all cases. Although interactions captured by the viscous simulations for the on-design conditions increase losses in the inlets, they enhance turbulence in the isolator, favoring the mixing of air and fuel, and improving the overall factor of the system. Jaws inlet demonstrates the most valuable design with higher performance, but its factor later in the combustor drops relative to its rectangular counterpart. (4) A parametric study of the location and direction of injection is conducted to select the configuration for fuel penetration, mixing factor (factor) and other combustion qualities. Although the trends observed with and without chemical reactions are the same, the former yields roughly 10% higher mixing factor. Unlike at frozen conditions, when chemical reactions are considered, a high compression area was observed upstream of the cavity, not present when modeling Jaws. The upstream reactions from the cavity have a significant impact on the development of the shear layers and downstream development of the entire combustion. (5) Steady and unsteady simulations are conducted to characterize the ignition process, flame anchoring and flashback effects. This unsteadiness enlarges the circulation region in and around the cavity, allowing the reactions to propagate forward through the shear layer, and increases the mixing factor. In Scoop, these effects are exacerbated due to the thicker low energy profile surrounding the walls and most of the lower section of the combustor. In the steady assumptions, the forward reactions and their effects are positioned farthest upstream, closest to the combustor entrance. (6) Unsteady Reynolds Average Navier-Stokes (URANS) and Large Eddy Simulation (LES) modeling are compared to explore overall flow structure and for comparison of individual numerical methods. In URANS, the flashback effects are midway between the entrance and the step, whereas in LES, this effect is near the edge of the step in addition to yielding a higher combustion factor. Thus, the turbulence model and inflow assumptions can critically affect the total outcome of such devices.

KSC-99pc14

NASA Image and Video Library

1999-01-05

KENNEDY SPACE CENTER, FLA. -- This roseate spoonbill seems to pause midstride as it searches for food in a canal in the Merritt Island National Wildlife Refuge. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas

The Strength and Number of Visual Mediators in Learning Letter-Sound Associations in Reading: A Film Study.

ERIC Educational Resources Information Center

Ackerman, Jerrold

The role of visual imagery in the learning of letter-sound combinations was investigated using such mediating images as two scoops of ice cream for the letter "m." In a preliminary study, high-, medium-, and low-strength mediating images were determined for each letter-sound combination. The 216 kindergarten subjects in the main study were…

Twelve Months in Two Minutes Curiositys First Year on Mars

NASA Image and Video Library

2013-08-01

A series of 548 images shows the view from a fisheye camera on the front of NASA's Mars rover Curiosity from the day the rover landed in August 2012 through July 2013. The camera is the rover's front Hazard-Avoidance Camera. The scenes include Curiosity collecting its first scoops of Martian soil and collecting a drilled sample form inside a Martian rock.

KSC-02pd0551

NASA Image and Video Library

2002-04-07

KENNEDY SPACE CENTER, FLA. -- A small flock of Roseate Spoonbills wade in the water near KSC while two others take flight. The birds, named for their brilliant pink color and paddle-shaped bill, usually feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. [Photo by Mike Brown

On the Cause of University Students' Cheating Phenomenon from the Perspective of Albert Bandura's Reciprocal Determinism

ERIC Educational Resources Information Center

Run-xian, Zhou; Xiao-pin, Zhou

2007-01-01

In recent years, "cheating" becomes a prevalent social phenomenon among the university students, which result in a bad influence to the quality of higher education, to the healthy growth of the university students, and to the social morale. To solve this problem, the key is to scoop out the root reason and get rid of it thoroughly. The emergence…

Apollo 16 astronauts take lunar soil sample from Station no.9 during EVA

NASA Technical Reports Server (NTRS)

1971-01-01

One of the Apollo 16 astronauts takes lunar soil sample at the base of a small boulder at Station no.9 during the second Apollo 16 extravehicular activity (EVA-2) at the Descartes landing site. Depressions to th right of the scoop were made when a surface sample was taken. This photograph was taken just before the boulder was rolled over.

"The Chattanooga Times" and NewsChannel 9: Working Together To Get the Scoop and the Implications for Journalism Educators.

ERIC Educational Resources Information Center

Pringle, Peter K.; Alderman, Betsy B.

Although high profile media mergers gain national attention, collaboration seems to be the trend among local news gathering organizations. Local media are discovering that one answer to cutbacks in budgets and personnel is to work with the competition to get the story. The verdict is still out about how the competitor-as-collaborator approach will…

Evaluating the performance of Sentinel-3 SRAL SAR Altimetry in the Coastal and Open Ocean, and developing improved retrieval methods - The ESA SCOOP Project.

NASA Astrophysics Data System (ADS)

Benveniste, J.; Cotton, D.; Moreau, T.; Varona, E.; Roca, M.; Cipollini, P.; Cancet, M.; Martin, F.; Fenoglio-Marc, L.; Naeije, M.; Fernandes, J.; Restano, M.; Ambrozio, A.

2016-12-01

The ESA Sentinel-3 satellite, launched in February 2016 as a part of the Copernicus programme, is the second satellite to operate a SAR mode altimeter. The Sentinel 3 Synthetic Aperture Radar Altimeter (SRAL) is based on the heritage from Cryosat-2, but this time complemented by a Microwave Radiometer (MWR) to provide a wet troposphere correction, and operating at Ku and C-Bands to provide an accurate along-track ionospheric correction. Together this instrument package, including both GPS and DORIS instruments for accurate positioning, allows accurate measurements of sea surface height over the ocean, as well as measurements of significant wave height and surface wind speed. SCOOP (SAR Altimetry Coastal & Open Ocean Performance) is a project funded under the ESA SEOM (Scientific Exploitation of Operational Missions) Programme Element, started in September 2015, to characterise the expected performance of Sentinel-3 SRAL SAR mode altimeter products, in the coastal zone and open-ocean, and then to develop and evaluate enhancements to the baseline processing scheme in terms of improvements to ocean measurements. There is also a work package to develop and evaluate an improved Wet Troposphere correction for Sentinel-3, based on the measurements from the on-board MWR, further enhanced mostly in the coastal and polar regions using third party data, and provide recommendations for use. At the end of the project recommendations for further developments and implementations will be provided through a scientific roadmap. In this presentation we provide an overview of the SCOOP project, highlighting the key deliverables and discussing the potential impact of the results in terms of the application of delay-Doppler (SAR) altimeter measurements over the open-ocean and coastal zone. We also present the initial results from the project, including: Key findings from a review of the current "state-of-the-art" for SAR altimetry, Specification of the initial "reference" delay-Doppler and echo modelling /retracking processing schemes, Evaluation of the initial Test Data Set in the Open Ocean and Coastal Zone Overview of modifications planned to the reference delay-Doppler and echo modelling/ re-tracking processing schemes.

Preliminary remediation goals for use at the US Department of Energy Oak Ridge Operations Office. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-05-01

This technical memorandum presents Preliminary Remediation Goals (PRGs) for use in human health risk assessment efforts under the United States Department of Energy, Oak Ridge Operations Office Environmental Restoration (ER) Division. This document provides the ER Division with standardized PRGs which are integral to the Remedial Investigation/Feasibility Study process. They are used during project scooping (Data Quality Objectives development), in screening level risk assessments to support early action or No Further Investigation decisions, and in the baselines risk assessment where they are employed in the selection of chemicals of potential concern. The primary objective of this document is to standardizemore » these values and eliminate any duplication of effort by providing PRGs to all contractors involved in risk activities. In addition, by managing the assumptions and systems used in PRG derivation, the ER Risk Assessment Program will be able to control the level of quality assurance associated with these risk-based guideline values.« less

Robotics technology developments in the United States space telerobotics program

NASA Technical Reports Server (NTRS)

Lavery, David

1994-01-01

In the same way that the launch of Yuri Gagarin in April 1961 announced the beginning of human space flight, last year's flight of the German ROTEX robot flight experiment is heralding the start of a new era of space robotics. After a gap of twelve years since the introduction of a new capability in space remote manipulation, ROTEX is the first of at least ten new robotic systems and experiments which will fly before the year 2000. As a result of redefining the development approach for space robotic systems, and capitalizing on opportunities associated with the assembly and maintenance of the space station, the space robotics community is preparing a whole new generation of operational robotic capabilities. Expanding on the capabilities of earlier manipulation systems such as the Viking and Surveyor soil scoops, the Russian Lunakhods, and the Shuttle Remote Manipulator System (RMS), these new space robots will augment astronaut on-orbit capabilities and extend virtual human presence to lunar and planetary surfaces.

Is Graduate School Really for You? The Whos, Whats, Hows, and Whys of Pursuing a Master's or Ph.D.

ERIC Educational Resources Information Center

Seligman, Amanda I.

2012-01-01

Landing a job in today's academic job market is no easy feat. Is graduate school the answer? This informed and candid book provides anyone thinking about pursuing an advanced degree--and those who support them--with the inside scoop on what to expect in graduate school. Amanda I. Seligman helps potential students navigate graduate study--not just…

Hybrid isotope separation scheme

DOEpatents

Maya, Jakob

1991-01-01

A method of yielding selectively a desired enrichment in a specific isotope including the steps of inputting into a spinning chamber a gas from which a scavenger, radiating the gas with a wave length or frequency characteristic of the absorption of a particular isotope of the atomic or molecular gas, thereby inducing a photochemical reaction between the scavenger, and collecting the specific isotope-containing chemical by using a recombination surface or by a scooping apparatus.

Daily nursing care on patients undergoing venous-venous extracorporeal membrane oxygenation: a challenging procedure!

PubMed

Redaelli, Sara; Zanella, Alberto; Milan, Manuela; Isgrò, Stefano; Lucchini, Alberto; Pesenti, Antonio; Patroniti, Nicolò

2016-12-01

Daily nursing in critical care patients may alter vital parameters, especially in the most critically ill patients. The aim of our study was to evaluate feasibility and safety of daily nursing on patients undergoing venous-venous extracorporeal membrane oxygenation (vv-ECMO) for severe respiratory failure. Daily nursing was performed following defined phases (sponge bath, elevation with scooping stretcher, change position of endotracheal tube, dressing replacement). We recorded physiological and ECMO parameters before and during daily nursing in 5 patients for several days (total: 25 daily nursing) and adverse events: desaturation, hypertension, reduction of mixed venous oxygen saturation, arterial oxygen saturation or ECMO blood flow and elevation in minute ventilation. Sedative drug dosage and additional bolus were recorded. Daily nursing was performed in 92 % of cases (23/25), with a minimum of two adverse events per daily nursing. Hypertension and tachycardia were mostly recorded at the beginning, while desaturation, reduction in mixed venous oxygen saturation and blood flow were recorded during elevation with scooping stretcher. Increase in minute ventilation was frequent in spontaneous breathing patients. Additional bolus of sedation was required before and/or during nursing. Daily nursing significantly alters physiologic parameters; thus, it should be performed only when physicians are readily available to treat adverse events.

Right attitude, right decision and timely planning in surgical pedodontics -scoop out or expose it.

PubMed

Kethineni, Balaji; Peddi, Ravigna; Puppala, Ravindar; Banavath, Sunitha; Chowdary, Uday Kumar; Raj, Deepak

2013-04-01

Radicular cysts are the most common odontogenic cystic lesions of inflammatory origin and are usually asymptomatic and are left unnoticed, until detected by routine radiography. It is managed either by surgical enucleation or marsupialization. Conventional nonsurgical endodontic treatment has a high degree of clinical success, but in certain cases surgical intervention becomes necessary. This is the case report of a patient presenting with unilateral radicular cyst. The lesion is managed by marsupialization using a novel and safe method of separating the soft tissue mass of the periapical lesion which was in proximity to vital and vulnerable anatomical tissue, emphasizing the need of application of treatment in the best interest of patients. The treatment of choice is dependent on the size and localization of the lesion, the bone integrity of the lesions wall and its proximity to vital structure. This case report of radicular cysts emphasis on the advantages and disadvantages of the leading criteria that should be taken into consideration when assessing the treatment modalities for radicular cyst. Odontogenic cysts, Radicular cyst, Marsupialization, Enucleation. How to cite this article: Kethineni B, Peddi R, Puppala R, Sunitha B, Chowdary U K, Raj D. Right Attitude, Right Decision and Timely Planning in Surgical Pedodontics -Scoop Out or Expose It. J Int Oral Health 2013; 5(2):50-54.

Prehospital trauma care: a clinical review.

PubMed

Beuran, M; Paun, S; Gaspar, B; Vartic, N; Hostiuc, S; Chiotoroiu, A; Negoi, I

2012-01-01

There are many controversies related to the trauma patient care during the pre-hospital period nowadays. Due to the heterogeneity of the rescue personnel and variability of protocols used in various countries, the benefit of the prehospital advanced life support on morbidity and mortality has been not established. Systematic review of the literature using computer search of the Library of Medicine and the National Institutes of Health International PubMed Medline database using Entre interface.We reviewed the literature in what concerns the basic and advanced life support given to the trauma patients during the prehospital period. Although the organization of the medical emergency system varies from a country to another, the level of patient'scare can be classified into two main categories: Basic Life Support (BLS) and Advanced Life Support (ALS).There are many studies addressing what to be done at the scene.The prehospital care can be divided into two extremes: stay and play/treat then transfer or scoop and run/load and go. A balance between "scoop and run" and "stay and play" is probably the best approach for trauma patients. The chosen approach should be made according to the mechanism of injury (blunt versus penetrating trauma), distance to the trauma center (urban versus rural) and the available resources. RevistaChirurgia.

Prosody Predicts Contest Outcome in Non-Verbal Dialogs

PubMed Central

Dreiss, Amélie N.; Chatelain, Philippe G.

2016-01-01

Non-verbal communication has important implications for inter-individual relationships and negotiation success. However, to what extent humans can spontaneously use rhythm and prosody as a sole communication tool is largely unknown. We analysed human ability to resolve a conflict without verbal dialogs, independently of semantics. We invited pairs of subjects to communicate non-verbally using whistle sounds. Along with the production of more whistles, participants unwittingly used a subtle prosodic feature to compete over a resource (ice-cream scoops). Winners can be identified by their propensity to accentuate the first whistles blown when replying to their partner, compared to the following whistles. Naive listeners correctly identified this prosodic feature as a key determinant of which whistler won the interaction. These results suggest that in the absence of other communication channels, individuals spontaneously use a subtle variation of sound accentuation (prosody), instead of merely producing exuberant sounds, to impose themselves in a conflict of interest. We discuss the biological and cultural bases of this ability and their link with verbal communication. Our results highlight the human ability to use non-verbal communication in a negotiation process. PMID:27907039

Prosody Predicts Contest Outcome in Non-Verbal Dialogs.

PubMed

Dreiss, Amélie N; Chatelain, Philippe G; Roulin, Alexandre; Richner, Heinz

2016-01-01

Non-verbal communication has important implications for inter-individual relationships and negotiation success. However, to what extent humans can spontaneously use rhythm and prosody as a sole communication tool is largely unknown. We analysed human ability to resolve a conflict without verbal dialogs, independently of semantics. We invited pairs of subjects to communicate non-verbally using whistle sounds. Along with the production of more whistles, participants unwittingly used a subtle prosodic feature to compete over a resource (ice-cream scoops). Winners can be identified by their propensity to accentuate the first whistles blown when replying to their partner, compared to the following whistles. Naive listeners correctly identified this prosodic feature as a key determinant of which whistler won the interaction. These results suggest that in the absence of other communication channels, individuals spontaneously use a subtle variation of sound accentuation (prosody), instead of merely producing exuberant sounds, to impose themselves in a conflict of interest. We discuss the biological and cultural bases of this ability and their link with verbal communication. Our results highlight the human ability to use non-verbal communication in a negotiation process.

ARC-1969-A-16591

NASA Image and Video Library

1951-10-24

Flight evaluation and comparison of a NACA submerged inlet and a scoop inlet on the North American YF-93A (AF48-317 NACA-139). The YF-93A's were the first aircraft to use flush NACA engine inlets. aircraft to use flush NACA engine inlets. Note: Used in publication in Flight Research at Ames; 57 Years of Development and Validation of Aeronautical Technology NASA SP-1998-3300 and Memoirs of a Flight Test Engineer NASA SP-2001-4525

Hybrid isotope separation scheme

DOEpatents

Maya, J.

1991-06-18

A method is described for yielding selectively a desired enrichment in a specific isotope including the steps of inputting into a spinning chamber a gas from which a scavenger, radiating the gas with a wave length or frequency characteristic of the absorption of a particular isotope of the atomic or molecular gas, thereby inducing a photochemical reaction between the scavenger, and collecting the specific isotope-containing chemical by using a recombination surface or by a scooping apparatus. 2 figures.

Physical Properties of the Icy Soil at the Phoenix Landing Site

NASA Astrophysics Data System (ADS)

Keller, H.; Markiewicz, W. J.; Hviid, S. F.; Goetz, W.; Mellon, M. T.; El Maarry, M.; Madsen, M. B.; Smith, P.; Pike, W.; Zent, A.; Hecht, M. H.; Ming, D.; Staufer, U.

2008-12-01

The geomorphological setting of the subpolar terrain at the landing site is characterized by polygonal structures. These structures are generated by long term and periodic cycles of contraction and expansion of the subsurface icy soil. The physical properties of the covering soil layer effectively control the details of this process that has its counterpart on earth in (sub) polar regions including the Siberian tundra and in Antartica. One of the prime science goals of the Phoenix mission is to investigate the physical properties of the icy soil, how these processes are influenced by water vapour diffusion in the regolith and exchange of the water vapour with the atmosphere. It is important to understand these processes on diurnal, seasonal, and climatic time scales. Phoenix landed in the middle of one of the polygons. Its retro rockets cleared the ice table of the polygon underneath the jet assemblies from ca. 5 to 10 cm of loose cloddy regolith. Soil was piled up in the centre. The fact that the soil looked still cloddy similar to that in undisturbed areas suggests strong cohesiveness of the matrix material. The clumps were not destroyed by the blast. Excavated regolith material imaged in the scoop was made up of agglomerates of grains smaller than the best resolution of the Robotic Arm Camera (20 micron). Higher resolution images (4 micron) of the microscope corroborate that the soil is predominantly composed of agglomerates of very small particles with a mean size comparable to those observed in the Martian atmosphere. The Atomic Force Microscope reveals micron sized particles and smaller, partly of plate-like shape, indicating clay like particles. The matrix material of the soil is of reddish colour probably due to iron oxideadmixture. Only about 10% by volume of the soil are most often rounded grains between 40 to 100 micrometers of diameter. Some are glassy resembling micro tektites, and most of these are magnetic. The cohesiveness of the clumps and clods of matrix material is most likely caused by interfacial water, but electrostatic and van der Waals forces could also play a part. The soil also sticks readily to the scoop. Once desiccated in the scoop clumps fall apart further indicating that water was a major agent responsible for the cohesiveness of the soil.

View of 'Shadow Rock' taken during third extravehicular activity

NASA Technical Reports Server (NTRS)

1972-01-01

Astronaut Charles M. Duke Jr., Apollo 16 lunar module pilot, exposed this view of 'Shadow Rock' with his 70mm Hasselblad camera during the mission's third and final extravehicular activity (EVA-3), on April 23, 1972. This particular stop was referenced as Station #13. The scoop, a geological hand tool, leans against the rock and helps give an idea of the size. Station #13 is a little southeast of the North Ray crater at the Descartes area.

Example of Weathering And Sun Angle

NASA Image and Video Library

1996-12-12

The letter 'B' or perhaps the figure '8' appears to have been etched into the Mars rock at the left edge of this picture taken yesterday by NASA's Viking 1 Lander. It is believed to be an illusion caused by weathering processes and the angle of the sun as it illuminated the scene for the spacecraft camera. The object at lower left is the housing containing the surface sampler scoop. http://photojournal.jpl.nasa.gov/catalog/PIA00386

Test and Delivery of the Chemin Mineralogical Instrument for Mars Science Laboratory

NASA Technical Reports Server (NTRS)

Blake, D. F.; Vaniman, D.; Anderson, R.; Bish, D.; Chipera, S.; Chemtob, S.; Crisp, J.; DesMarais, D. J.; Downs, R.; Feldman, S.;

DETAIL VIEW OF BALL MILL FEED SYSTEM, MOUTH OF CLASSIFIER, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL VIEW OF BALL MILL FEED SYSTEM, MOUTH OF CLASSIFIER, AND ORE BIN CHUTE, LOOKING EAST NORTHEAST. CRUSHED ORE FROM THE SECONDARY ORE BIN WAS INTRODUCED INTO THE FEED TROUGH VIA A CHUTE. AS THE BALL MILL TURNED, THE ROUND SCOOP ALSO TURNED IN THE TROUGH TO CHANNEL ORE INTO THE BALL MILL. SEE CA-292-14 FOR IDENTICAL B&W NEGATIVE. - Gold Hill Mill, Warm Spring Canyon Road, Death Valley Junction, Inyo County, CA

DETAIL VIEW OF BALL MILL FEED SYSTEM, MOUTH OF CLASSIFIER, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAIL VIEW OF BALL MILL FEED SYSTEM, MOUTH OF CLASSIFIER, AND ORE BIN CHUTE, LOOKING EAST NORTHEAST. CRUSHED ORE FROM THE SECONDARY ORE BIN WAS INTRODUCED INTO THE FEED TROUGH VIA A CHUTE. AS THE BALL MILL TURNED, THE ROUND SCOOP ALSO TURNED IN THE TROUGH TO CHANNEL ORE INTO THE BALL MILL. SEE CA-292-20 (CT) FOR IDENTICAL COLOR TRANSPARENCY. - Gold Hill Mill, Warm Spring Canyon Road, Death Valley Junction, Inyo County, CA

Validation of the TOLNet lidars during SCOOP (Southern California Ozone Observation Project)

NASA Astrophysics Data System (ADS)

Leblanc, Thierry; Granados-Munoz, Maria-Jose; Strawbridge, Kevin; Senff, Chris; Langford, Andy; Berkoff, Tim; Gronoff, Guillaume; DeYoung, Russel; Carion, Bill; Chen, G.; Sullivan, John; McGee, Tom; Jonhson, M.; Kuang, S.; Newchurch, Mike

2018-04-01

Five TOLNet lidars participated to a validation campaign at the JPL-Table Mountain Facility, CA in August 2016. All lidars agreed within ±10% of each other and within ±7% of the ozonesondes. Centralized data processing was used to compare the uncertainty budgets. The results highlight the TOLNet potential to address science questions ranging from boundary layer processes to long range transport. TOLNet can now be seen as a robust network for use in field campaigns and long term monitoring.

Advanced Distributed Simulation Technology II (ADST-II) LAM Task Force DO #14 CDRL ABO3 After Action Report

DTIC Science & Technology

1997-01-17

SHOWDirect Control Systems (6) Betacam SP Players (Video Backup) (6) Betacam SP Recorders (Show Record) (2) CRV Laser Disc Rec/Players (GoTo) (14) Multi...IK Scoops (3)lKDP’s (1) Schedule 40 Light Pole (Flown) Control Console Dimming Cables & Distribution PRODUCTION HARDWARE (1) Sony Betacam SP...Shooters Package (1) Folsom Hi-Res Video Scan Converter (20) Betacam SP VideoTapes STAGING HARDWARE (1) Custom Screen Divider / Support 44 This

The Influence of Processing Soil With a Coffee Grinder on Soil Classification

DTIC Science & Technology

2015-01-20

shaker, sieves , coffee grinder, plastic limit tool, bowls, spatulas, and scoops. To classify soils, a dry sieve analysis is performed, as is a Plastic...processed with the coffee grinder for 90 seconds as described above. Sieve analysis using the wet preparation method was used to test and classify the soils...one 90 second cycle of Elevator Soil Figure 3: The blades after three 90 second cycles of Elevator Soil 71Page 4.2 Ottawa Sand Dry Sieve Analysis

Magnetic Particles Are Found In The Martian Atmosphere

NASA Technical Reports Server (NTRS)

1976-01-01

The dark bullseye pattern seen at the top of Viking l's camera calibration chart indicates the presence of magnetic particles in the fine dust in the Martian atmosphere. A tiny magnet is mounted at that spot to catch wind-borne magnetic particles. The particles may have been tossed into the atmosphere surrounding the spacecraft at the time of landing and during the digging and delivery of the Mars soil sample by the surface sampler scoop. This picture was taken August 4.

Investigating Astromaterials Curation Applications for Dexterous Robotic Arms

NASA Technical Reports Server (NTRS)

Snead, C. J.; Jang, J. H.; Cowden, T. R.; McCubbin, F. M.

2018-01-01

The Astromaterials Acquisition and Curation office at NASA Johnson Space Center is currently investigating tools and methods that will enable the curation of future astromaterials collections. Size and temperature constraints for astromaterials to be collected by current and future proposed missions will require the development of new robotic sample and tool handling capabilities. NASA Curation has investigated the application of robot arms in the past, and robotic 3-axis micromanipulators are currently in use for small particle curation in the Stardust and Cosmic Dust laboratories. While 3-axis micromanipulators have been extremely successful for activities involving the transfer of isolated particles in the 5-20 micron range (e.g. from microscope slide to epoxy bullet tip, beryllium SEM disk), their limited ranges of motion and lack of yaw, pitch, and roll degrees of freedom restrict their utility in other applications. For instance, curators removing particles from cosmic dust collectors by hand often employ scooping and rotating motions to successfully free trapped particles from the silicone oil coatings. Similar scooping and rotating motions are also employed when isolating a specific particle of interest from an aliquot of crushed meteorite. While cosmic dust curators have been remarkably successful with these kinds of particle manipulations using handheld tools, operator fatigue limits the number of particles that can be removed during a given extraction session. The challenges for curation of small particles will be exacerbated by mission requirements that samples be processed in N2 sample cabinets (i.e. gloveboxes). We have been investigating the use of compact robot arms to facilitate sample handling within gloveboxes. Six-axis robot arms potentially have applications beyond small particle manipulation. For instance, future sample return missions may involve biologically sensitive astromaterials that can be easily compromised by physical interaction with a curator; other potential future returned samples may require cryogenic curation. Robot arms may be combined with high resolution cameras within a sample cabinet and controlled remotely by curator. Sophisticated robot arm and hand combination systems can be programmed to mimic the movements of a curator wearing a data glove; successful implementation of such a system may ultimately allow a curator to virtually operate in a nitrogen, cryogenic, or biologically sensitive environment with dexterity comparable to that of a curator physically handling samples in a glove box.

Investigation of Aerodynamic and Icing Characteristics of a Flush Alternate Inlet Induction System Air Scoop

NASA Technical Reports Server (NTRS)

Lewis, James P.

1953-01-01

An investigation has been made in the NACA Lewis icing research tunnel to determine the aerodynamic and icing characteristics of a full-scale induction-system air-scoop assembly incorporating a flush alternate inlet. The flush inlet was located immediately downstream of the offset ram inlet and included a 180 deg reversal and a 90 deg elbow in the ducting between inlet and carburetor top deck. The model also had a preheat-air inlet. The investigation was made over a range of mass-air- flow ratios of 0 to 0.8, angles of attack of 0 and 4 deg airspeeds of 150 to 270 miles per hour, air temperatures of 0 and 25 F various liquid-water contents, and droplet sizes. The ram inlet gave good pressure recovery in both clear air and icing but rapid blockage of the top-deck screen occurred during icing. The flush alternate inlet had poor pressure recovery in both clear air and icing. The greatest decreases in the alternate-inlet pressure recovery were obtained at icing conditions of low air temperature and high liquid-water content. No serious screen icing was observed with the alternate inlet. Pressure and temperature distributions on the carburetor top deck were determined using the preheat-air supply with the preheat- and alternate-inlet doors in various positions. No screen icing occurred when the preheat-air system was operated in combination with alternate-inlet air flow.

The influence of direct compression powder blend transfer method from the container to the tablet press on product critical quality attributes: a case study.

PubMed

Teżyk, Michał; Jakubowska, Emilia; Milczewska, Kasylda; Milanowski, Bartłomiej; Voelkel, Adam; Lulek, Janina

2017-06-01

The aim of this article is to compare the gravitational powder blend loading method to the tablet press and manual loading in terms of their influence on tablets' critical quality attributes (CQA). The results of the study can be of practical relevance to the pharmaceutical industry in the area of direct compression of low-dose formulations, which could be prone to content uniformity (CU) issues. In the preliminary study, particle size distribution (PSD) and surface energy of raw materials were determined using laser diffraction method and inverse gas chromatography, respectively. For trials purpose, a formulation containing two pharmaceutical ingredients (APIs) was used. Tablet samples were collected during the compression progress to analyze their CQAs, namely assay and CU. Results obtained during trials indicate that tested direct compression powder blend is sensitive to applied powder handling method. Mild increase in both APIs content was observed during manual scooping. Gravitational approach (based on discharge into the drum) resulted in a decrease in CU, which is connected to a more pronounced assay increase at the end of tableting than in the case of manual loading. The correct design of blend transfer over single unit processes is an important issue and should be investigated during the development phase since it may influence the final product CQAs. The manual scooping method, although simplistic, can be a temporary solution to improve the results of API's content and uniformity when compared to industrial gravitational transfer.

Assessing deep-seated landslide susceptibility using 3-D groundwater and slope-stability analyses, southwestern Seattle, Washington

USGS Publications Warehouse

Brien, Dianne L.; Reid, Mark E.

2008-01-01

In Seattle, Washington, deep-seated landslides on bluffs along Puget Sound have historically caused extensive damage to land and structures. These large failures are controlled by three-dimensional (3-D) variations in strength and pore-water pressures. We assess the slope stability of part of southwestern Seattle using a 3-D limit-equilibrium analysis coupled with a 3-D groundwater flow model. Our analyses use a high-resolution digital elevation model (DEM) combined with assignment of strength and hydraulic properties based on geologic units. The hydrogeology of the Seattle area consists of a layer of permeable glacial outwash sand that overlies less permeable glacial lacustrine silty clay. Using a 3-D groundwater model, MODFLOW-2000, we simulate a water table above the less permeable units and calibrate the model to observed conditions. The simulated pore-pressure distribution is then used in a 3-D slope-stability analysis, SCOOPS, to quantify the stability of the coastal bluffs. For wet winter conditions, our analyses predict that the least stable areas are steep hillslopes above Puget Sound, where pore pressures are elevated in the outwash sand. Groundwater flow converges in coastal reentrants, resulting in elevated pore pressures and destabilization of slopes. Regions predicted to be least stable include the areas in or adjacent to three mapped historically active deep-seated landslides. The results of our 3-D analyses differ significantly from a slope map or results from one-dimensional (1-D) analyses.

Mars Science Laboratory: Results From Bradbury Landing to Glenelg

NASA Astrophysics Data System (ADS)

Grotzinger, John; Blake, Dave; Crisp, Joy; Edgett, Ken; Gellert, Ralf; Gomez Elvira, Javier; Hassler, Don; Mahaffy, Paul; Malin, Mike; Mitrofanov, Igor; Meyer, Michael; Vasavada, Ashwin; Wiens, Roger; MSL Science Team

2013-04-01

The Mars Science Laboratory rover, Curiosity, analyzed rocks, soils, and the atmosphere between Bradbury Landing and the contact with a light-toned, fractured , high-thermal inertia unit ~500 meters to the east ("Glenelg"). A number of in-place outcrops were encountered along this traverse that allows a simple stratigraphy to be con-structed. A variety of siliciclastic sedimentary rocks are present in the section, possibly also including minor basaltic volcanics. At several localities en route to Glenelg, Curiosity observed conglomeratic bedrock containing rounded pebbles ranging in size from 5-40 mm, forming beds at least 5 cm thick with locally well-developed planar stratification; this, plus grain-supported and imbricated clast fabrics suggest transport in aqueous flows with depths of 0.1-0.8 m, and velocities of 14-63 cm/sec. These conglomerates were likely derived from the Gale crater rim and transported down the Peace Vallis channel network; ChemCam data suggest the presence of feldspar and basaltic composition rock fragments as pebbles. APXS and ChemCam data show the out-of-place rock, "Jake Matijevic", to have an evolved, alkaline composi-tion similar to nepheline-normative muegerites, and suggestive of high pressure partial melting of the mantle. Other, stratigraphically in-place rocks show basanitic composition, with high K2O, low SiO2, and high FeO. Between Sols 56 and 110 Curiosity studied the "Rocknest" eolian deposit which was selected for scooping and eventual delivery to CheMin and SAM. The APXS composition of this deposit is consistent with average Mars soils encountered by previous missions (SO3 + Cl ~6 wt.%). Scooped samples delivered to CheMin reveal the presence of forsterite, pigeonite, augite, plagioclase, and several trace minerals including quartz, anhydrite, magnetite, hematite and illmenite. SAM analysis of the scooped soil yielded four different Evolved Gas Analysis (EGA) experiments depending on the temperature at which evolved gases were sent to the TLS versus the hydrocarbon trap and GC. Heating of the sample to 825 °C EGA yielded a rich set of gases with variable overlap including H2O, CO2, O2, and SO2. These suggest the likely presence of perchlorates, sulfates and/or sulfides, and carbonates in the soil. Detection of simple Cl-bearing organic compounds (such as CH3Cl) by the QMS does not demonstrate the presence of organics in the Rocknest soil until terrestrial contaminent souces can be ruled out. A D/H measured by TLS of ~5x terrestrial values indicates significant enrichment, suggestive of early H escape.

Automated Coal-Mining System

NASA Technical Reports Server (NTRS)

Gangal, M. D.; Isenberg, L.; Lewis, E. V.

1985-01-01

Proposed system offers safety and large return on investment. System, operating by year 2000, employs machines and processes based on proven principles. According to concept, line of parallel machines, connected in groups of four to service modules, attacks face of coal seam. High-pressure water jets and central auger on each machine break face. Jaws scoop up coal chunks, and auger grinds them and forces fragments into slurry-transport system. Slurry pumped through pipeline to point of use. Concept for highly automated coal-mining system increases productivity, makes mining safer, and protects health of mine workers.

The Amorphous Component in Martian Basaltic Soil in Global Perspective from MSL and MER Missions

NASA Technical Reports Server (NTRS)

Morris, R. V.; Ming, D. W.; Blake, D. F.; Vaniman, D. T.; Bish, D. L.; Chipera, S. J.; Downs, R. T.; Gellert, R.; Treiman, A. H.; Yen, A. S.;

Lake Michigan faces exotic species, dune sand mining, other challenges

NASA Astrophysics Data System (ADS)

Showstack, Randy

As Steve Pothoven scooped out his bottom trawl catch on the deck of a U.S. government research vessel in June, he expected the regular monitoring exercise to land alewives and a mound of zebra mussels. These two now-ubiquitous exotic aquatic species are among more than 130 that have entered the Great Lakes ecosystem over the past century. They have invaded by various means: hiding in ballast water, navigating through connecting channels such as the Welland Canal that was completed in 1829 as a route around Niagara Falls, or introduced on purpose.

Native Skywatchers and the Makoc&dotbelow;e Wic&dotbelow;aŋḣpi Wowapi—D(L)akota Star Map—Building Community Around Native Star Knowledge

NASA Astrophysics Data System (ADS)

Lee, A. S.; Rock, J.

2014-07-01

In D(L)akota the Big Dipper is known as To/ToŋWiŋ—Blue/Birth Woman. She lives at the center of the scoop in the Big Dipper and is the door keeper between the star world and the Earth. The same group of seven bright stars is also known as Wịakiyuhapi, the Stretcher, and Waṡihdapi/Waṡiglapi, the Mourners. This is the beginning of the journey back into the spirit world for those leaving the Earth. Embedded in the native constellations are teachings that help guide and inspire native peoples. This workshop will present the D(L)akota Star Map and constellations of the current night sky. The Native Skywatchers research and programming seeks out elders, culture teachers, and community members to discuss the Ojibwe and D(L)akota star knowledge. Together we have created Makoc&dotbelow;e Wic&dotbelow;aŋḣpi Wowapi—D(L)akota Star Map. This map and related curriculum was published and disseminated to regional educators at our Native Skywatchers Middle School Teacher workshops in June 2012 and 2013. We are building community around the native star knowledge.

NACA Researcher Measures Ice on a Turbojet Engine Inlet

NASA Image and Video Library

1948-11-21

The National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory conducted an extensive icing research program in the late 1940s that included studies in the Icing Research Tunnel and using specially modified aircraft. One facet of this program was the investigation of the effects of icing on turbojets. Although jet engines allowed aircraft to pass through inclement weather at high rates of speed, ice accumulation was still a concern. The NACA’s B-24M Liberator was initially reconfigured with a General Electric I-16 engine installed in the aircraft’s waist compartment with an air scoop and spray nozzles to produce the artificial icing conditions. The centrifugal engine appeared nearly impervious to the effects of icing. Axial-flow jet engines, however, were much more susceptible to icing damage. The inlet guide vanes were particularly vulnerable, but the cowling’s leading edge, the main bearing supports, and accessory housing could also ice up. If pieces of ice reached the engine’s internal components, the compressor blades could be damaged. To study this phenomenon, a Westinghouse 24C turbojet, seen in this photograph, was installed under the B-24M’s right wing. In January 1948 flight tests of the 24C in icing conditions began. Despite ice buildup into the second stage of the compressor, the engine was able to operate at takeoff speeds. Researchers found the ice on the inlet vanes resulted in half of the engine’s decreased performance.

Astronauts Lovell and Haise during simulation of lunar traverse at Hawaii

NASA Image and Video Library

1969-12-01

S70-20253 (December 1969) --- Astronauts James A. Lovell Jr. (left) commander, and Fred W. Haise Jr., lunar module pilot, carry out a simulation of a lunar traverse at Kilauea, Hawaii, site. Both crew members of NASA's third team of moon explorers were carrying cameras and communications equipment during the simulated traverse. They maintained contact with men in the roles of spacecraft throughout the traverse. Lovell holds a scoop for the Apollo Lunar Hand Tools (ALHT) and a gnomon, also for the ALHT is deployed in front of Haise. The ALHT carrier is at left background, (almost obscured by Lovell).

Development of Cowling for Long-nose Air-cooled Engine in the NACA Full-scale Wind Tunnel

NASA Technical Reports Server (NTRS)

Guryansky, Eugene R.; Silverstein, Abe

1941-01-01

An investigation of cowlings for long-nose radial engines was made on the Curtiss XP-42 fighter in the NACA full-scale wind tunnel. The unsatisfactory aerodynamic characteristics of all the cowlings with scoop inlets tested led to the development of the annular high-velocity inlet cowlings. Tests showed that ratio of cooling-air velocity at cowling inlet to stream velocity should not be less than 0.5 for this type of cowling and that critical compressibility speed can be extended to more than 500 mph at 20,000 ft altitude.

Proof of principal for staircase auger chip removal theory

NASA Technical Reports Server (NTRS)

Barron, Jeffrey B.; Brewer, Steve; Kerns, Kenneth; Moody, Kyle; Rossi, Richard A.

1987-01-01

A proof of principal design of the staircase auger theory is provided for lunar drilling. The drill is designed to drill holes 30 meters deep and 0.1 meters in diameter. The action of the auger is 0.01 meter strokes at a varying number of strokes per second. A detailed analysis of the interaction of the auger and particle was done to optimize the parameters of the auger. This optimum design will allow for proper heat removal and reasonable drilling time. The drill bit is designed to scoop the particles into the auger while efficiently cutting through the moon's surface.

Phoenix Carries Soil to Wet Chemistry Lab

NASA Technical Reports Server (NTRS)

2008-01-01

This image taken by the Surface Stereo Imager on NASA's Phoenix Mars Lander shows the lander's Robotic Arm scoop positioned over the Wet Chemistry Lab delivery funnel on Sol 29, the 29th Martian day after landing, or June 24, 2008. The soil will be delivered to the instrument on Sol 30.

This image has been enhanced to brighten the scene.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Optics pioneers scoop Nobel prize

NASA Astrophysics Data System (ADS)

Banks, Michael

2009-11-01

Three physicists who carried out pioneering work in former industrial research labs have picked up this year's Nobel Prize for Physics. One half of the SEK 10m prize has been awarded to Charles Kao, 75, for his work at the UK-based Standard Telephones and Cables (STC) on the transmission of light in optical fibres, which underpinned the telecommunications revolution. The other half of the prize is shared between Willard Boyle, 85, and George Smith, 79, of Bell Laboratories in New Jersey, US, for inventing the charge-coupled device (CCD) - an imaging semiconductor circuit that forms the basis of most digital cameras.

Chimpanzees routinely fish for algae with tools during the dry season in Bakoun, Guinea.

PubMed

Boesch, Christophe; Kalan, Ammie K; Agbor, Anthony; Arandjelovic, Mimi; Dieguez, Paula; Lapeyre, Vincent; Kühl, Hjalmar S

2017-03-01

Wild chimpanzees regularly use tools, made from sticks, leaves, or stone, to find flexible solutions to the ecological challenges of their environment. Nevertheless, some studies suggest strong limitations in the tool-using capabilities of chimpanzees. In this context, we present the discovery of a newly observed tool-use behavior in a population of chimpanzees (Pan troglodytes verus) living in the Bakoun Classified Forest, Guinea, where a temporary research site was established for 15 months. Bakoun chimpanzees of every age-sex class were observed to fish for freshwater green algae, Spirogrya sp., from rivers, streams, and ponds using long sticks and twigs, ranging from 9 cm up to 4.31 m in length. Using remote camera trap footage from 11 different algae fishing sites within an 85-km 2 study area, we found that algae fishing occurred frequently during the dry season and was non-existent during the rainy season. Chimpanzees were observed algae fishing for as little as 1 min to just over an hour, with an average duration of 9.09 min. We estimate that 364 g of Spirogyra algae could be retrieved in this time, based on human trials in the field. Only one other chimpanzee population living in Bossou, Guinea, has been described to customarily scoop algae from the surface of the water using primarily herbaceous tools. Here, we describe the new behavior found at Bakoun and compare it to the algae scooping observed in Bossou chimpanzees and the occasional variant reported in Odzala, Republic of the Congo. As these algae are reported to be high in protein, carbohydrates, and minerals, we hypothesize that chimpanzees are obtaining a nutritional benefit from this seasonally available resource. © 2016 Wiley Periodicals, Inc.

Tool use without a tool: kinematic characteristics of pantomiming as compared to actual use and the effect of brain damage.

PubMed

Hermsdörfer, Joachim; Li, Yong; Randerath, Jennifer; Goldenberg, Georg; Johannsen, Leif

2012-04-01

Movement goals and task mechanics differ substantially between actual tool use and corresponding pantomimes. In addition, apraxia seems to be more severe during pantomime than during actual tool use. Comparisons of these two modes of action execution using quantitative methods of movement analyses are rare. In the present study, repetitive scooping movements with a ladle from a bowl into a plate were recorded and movement kinematics was analyzed. Brain-damaged patients using their ipsilesional hand and healthy control subjects were tested in three conditions: pantomime, demonstration with the tool only, and actual use in the normal context. Analysis of the hand trajectories during the transport component revealed clear differences between the tasks, such as slower actual use and moderate deficits in patients with left brain damage (LBD). LBD patients were particularly impaired in the scooping component: LBD patients with apraxia exhibited reduced hand rotation at the bowl and the plate. The deficit was most obvious during pantomime but actual use was also affected, and reduced hand rotation was consistent across conditions as indicated by strong pair-wise correlations between task conditions. In healthy control subjects, correlations between movement parameters were most evident between the pantomime and demonstration conditions but weak in correlation pairs involving actual use. From these findings and published neuroimaging evidence, we conclude that for a specific tool-use action, common motor schemas are activated but are adjusted and modified according to the actual task constraints and demands. An apraxic LBD individual can show a deficit across all three action conditions, but the severity can differ substantially between conditions.

The hybrid assisted limb (HAL) for Care Support, a motion assisting robot providing exoskeletal lumbar support, can potentially reduce lumbar load in repetitive snow-shoveling movements.

PubMed

Miura, Kousei; Kadone, Hideki; Koda, Masao; Abe, Tetsuya; Endo, Hirooki; Murakami, Hideki; Doita, Minoru; Kumagai, Hiroshi; Nagashima, Katsuya; Fujii, Kengo; Noguchi, Hiroshi; Funayama, Toru; Kawamoto, Hiroaki; Sankai, Yoshiyuki; Yamazaki, Masashi

2018-03-01

An excessive lumbar load with snow-shoveling is a serious problem in snowfall areas. Various exoskeletal robots have been developed to reduce lumbar load in lifting work. However, few studies have reported the attempt of snow-shoveling work using exoskeletal robots. The purpose of the present study was to test the hypothesis that the HAL for Care Support robot would reduce lumbar load in repetitive snow-shoveling movements. Nine healthy male volunteers performed repetitive snow-shoveling movements outdoors in a snowfall area for as long as possible until they were fatigued. The snow-shoveling trial was performed under two conditions: with and without HAL for Care Support. Outcome measures were defined as the lumbar load assessed by the VAS of lumbar fatigue after the snow-shoveling trial and the snow-shoveling performance, including the number of scoops, and snow shoveling time and distance. The mean of VAS of lumbar fatigue, the number of scoops, and snow-shoveling time and distance without HAL for Care Support were 75.4 mm, 50.3, 145 s, and 9.6 m, while with HAL for Care Support were 39.8 mm, 144, 366 s, and 35.4 m. The reduction of lumbar fatigue and improvement of snow-shoveling performance using HAL for Care Support were statistically significant. There was no adverse event during snow-shoveling with HAL for Care Support. In conclusion, the HAL for Care Support can reduce lumbar load in repetitive snow-shoveling movements. Copyright © 2017 Elsevier Ltd. All rights reserved.

An Organic Decontamination Method for Sampling Devices used in Life-detection Studies

NASA Technical Reports Server (NTRS)

Eigenbrode, Jennifer; Maule, Jake; Wainwright, Norm; Steele, Andrew; Amundsen, Hans E.F.

2008-01-01

Organic decontamination of sampling and storage devices are crucial steps for life-detection, habitability, and ecological investigations of extremophiles living in the most inhospitable niches of Earth, Mars and elsewhere. However, one of the main stumbling blocks for Mars-analogue life-detection studies in terrestrial remote field-sites is the capability to clean instruments and sampling devices to organic levels consistent with null values. Here we present a new seven-step, multi-reagent cleaning and decontamination protocol that was adapted and tested on a glacial ice-coring device and on a rover-guided scoop used for sediment sampling both deployed multiple times during two field seasons of the Arctic Mars Analog Svalbard Expedition AMASE). The effectiveness of the protocols for both devices was tested by (1)in situ metabolic measurements via APT, (2)in situ lipopolysacchride (LPS) quantifications via low-level endotoxin assays, and(3) laboratory-based molecular detection via gas chromatography-mass spectrometry. Our results show that the combination and step-wise application of disinfectants with oxidative and solvation properties for sterilization are effective at removing cellular remnants and other organic traces to levels necessary for molecular organic- and life-detection studies. The validation of this seven-step protocol - specifically for ice sampling - allows us to proceed with confidence in kmskia4 analogue investigations of icy environments. However, results from a rover scoop test showed that this protocol is also suitable for null-level decontamination of sample acquisition devices. Thus, this protocol may be applicable to a variety of sampling devices and analytical instrumentation used for future astrobiology missions to Enceladus, and Europa, as well as for sample-return missions.

Sling, Scoop, and Squirter: Anatomical Features Facilitating Prey Transport, Processing, and Swallowing in Rorqual Whales (Mammalia: Balaenopteridae).

PubMed

Werth, Alexander J; Ito, Haruka

2017-11-01

Much is known about lunge feeding in balaenopterid whales, but many key aspects of structure, function, and behavior have not yet been explained in detail, especially with regard to concentrating, positioning, and swallowing large aggregations of prey. We describe a novel system of three integrated structural components, all of which are involved in sequential feeding activities (intraoral transport, filtration, and swallowing of prey) that follow lunge-feeding engulfment of prey-laden water in rorquals: (1) a hammock-like muscular sling comprising extrinsic lingual musculature along the midline of the ventral pouch; (2) the flattened scoop-like arrangement of caudal-most baleen plates converging in the oropharynx adjacent to the esophageal opening; and (3) a flow-diverting flange at the posterior dorsum of the lip, by a flow channel at the angle of the mouth. Subsequent to contraction of the ventral pouch and concomitant expulsion of the mouthful of ingested water, these three structures together, we contend, aid in (1) channeling prey posteriorly toward the esophageal opening; (2) concentrating prey as excess water is squeezed from (what is presumed to be) the slurry-like mixture of nektonic and/or planktonic prey and water; and (3) guiding prey into the isthmus of the fauces while simultaneously (4) facilitating expulsion of water. These related functions occur along with, and are in part achieved by, elevation and retraction of the tongue and oral floor. Given their presumed functional role, these systems are best described as a suite of integrated structural adaptations. Anat Rec, 2017. © 2017 Wiley Periodicals, Inc. Anat Rec, 300:2070-2086, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Equations of motion of a hybrid relativistic rocket and Bussard ramjet

NASA Astrophysics Data System (ADS)

Hacyan, Shahen

2010-05-01

A possible generalization of a Bussard ramjet is a vehicle that carries part of the fuel from the beginning of the journey and collects the other part from the interstellar medium. Its velocity could be controlled by regulating the amount of scooped and ejected mass. In this paper, the motion of such a hybrid spacecraft is analyzed within the framework of special relativity. The results permit to compare the performance of a Bussard ramjet and a standard rocket (which is known to be quite inadequate for interstellar travels). It turns out that even a hybrid ramjet is well outside presently conceivable technology.

Crystal-Chemical Analysis of Soil at Rocknest, Gale Crater

NASA Technical Reports Server (NTRS)

Morrison, S. M.; Downs, R. T.; Blake, D. F.; Bish, D. L.; Ming, D. W.; Morris, R. V.; Yen, A. S.; Chipera, S. J.; Treiman, A. H.; Vaniman, D. T.;

Rasp Tool on Phoenix Robotic Arm Model

NASA Technical Reports Server (NTRS)

2008-01-01

This close-up photograph taken at the Payload Interoperability Testbed at the University of Arizona, Tucson, shows the motorized rasp protruding from the bottom of the scoop on the engineering model of NASA's Phoenix Mars Lander's Robotic Arm.

The rasp will be placed against the hard Martian surface to cut into the hard material and acquire an icy soil sample for analysis by Phoenix's scientific instruments.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is led by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Results of tests CS4 and CS5 to investigate dynamic loads and pressures on 0.03-scale models (Ax1319-3/4 and 45-0) of mated 747 cam and space shuttle orbiter in the Boeing transonic wind tunnel

NASA Technical Reports Server (NTRS)

1976-01-01

A 0.03-scale model of the 747 CAM/Orbiter was tested in an 8 x 12 foot transonic wind tunnel. Dynamic loads, pressure, and empennage flow field data were obtained using pressure transducers, strain gages, and a split film anemometer. The test variables included Mach number, angle of attack, sideslip angle, orbiter tailcone on and off, orbiter partial tailcone, orbiter nozzle air scoops, orbiter body flap angle, and orbiter elevon angle.

Temperature variation of pitch in a pitch pot

NASA Astrophysics Data System (ADS)

Droste, Stefan; Klinger, Charles

2007-05-01

Opticians have for years kept polishing pitch in electrified containers called "pitch pots" that keeps it in at an elevated temperature. The temperature is adjusted to achieve the desired pitch viscosity. When pitch is desired, the optician will remove the cover, reach into the pot and scoop out a glob of pitch with his hand. However, without thinking, most opticians will "fold over" or "push aside" the top layer of pitch to select pitch from deeper in the pot. This paper documents the change in temperature as the distance from the top surface increases. It also shows the effect of insulating the top cover.

A Lagrangian parcel based mixing plane method for calculating water based mixed phase particle flows in turbo-machinery

NASA Astrophysics Data System (ADS)

Bidwell, Colin S.

2015-05-01

A method for calculating particle transport through turbo-machinery using the mixing plane analogy was developed and used to analyze the energy efficient engine . This method allows the prediction of temperature and phase change of water based particles along their path and the impingement efficiency and particle impact property data on various components in the engine. This methodology was incorporated into the LEWICE3D V3.5 software. The method was used to predict particle transport in the low pressure compressor of the . The was developed by NASA and GE in the early 1980s as a technology demonstrator and is representative of a modern high bypass turbofan engine. The flow field was calculated using the NASA Glenn ADPAC turbo-machinery flow solver. Computations were performed for a Mach 0.8 cruise condition at 11,887 m assuming a standard warm day for ice particle sizes of 5, 20 and 100 microns and a free stream particle concentration of . The impingement efficiency results showed that as particle size increased average impingement efficiencies and scoop factors increased for the various components. The particle analysis also showed that the amount of mass entering the inner core decreased with increased particle size because the larger particles were less able to negotiate the turn into the inner core due to particle inertia. The particle phase change analysis results showed that the larger particles warmed less as they were transported through the low pressure compressor. Only the smallest 5 micron particles were warmed enough to produce melting with a maximum average melting fraction of 0.18. The results also showed an appreciable amount of particle sublimation and evaporation for the 5 micron particles entering the engine core (22.6 %).

Cookoff Modeling of a WIPP waste drum (68660)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hobbs, Michael L.

2014-11-24

A waste drum located 2150 feet underground may have been the root cause of a radiation leak on February 14, 2014. Information provided to the WIPP Technical Assessment Team (TAT) was used to describe the approximate content of the drum, which included an organic cat litter (Swheat Scoop®, or Swheat) composed of 100% wheat products. The drum also contained various nitrate salts, oxalic acid, and a nitric acid solution that was neutralized with triethanolamine (TEA). CTH-TIGER was used with the approximate drum contents to specify the products for an exothermic reaction for the drum. If an inorganic adsorbent such asmore » zeolite had been used in lieu of the kitty litter, the overall reaction would have been endothermic. Dilution with a zeolite adsorbent might be a useful method to remediate drums containing organic kitty litter. SIERRA THERMAL was used to calculate the pressurization and ignition of the drum. A baseline simulation of drum 68660 was performed by assuming a background heat source of 0.5-10 W of unknown origin. The 0.5 W source could be representative of heat generated by radioactive decay. The drum ignited after about 70 days. Gas generation at ignition was predicted to be 300-500 psig with a sealed drum (no vent). At ignition, the wall temperature increases modestly by about 1°C, demonstrating that heating would not be apparent prior to ignition. The ignition location was predicted to be about 0.43 meters above the bottom center portion of the drum. At ignition only 3-5 kg (out of 71.6 kg total) has been converted into gas, indicating that most of the material remained available for post-ignition reaction.« less

Slope instability in complex 3D topography promoted by convergent 3D groundwater flow

NASA Astrophysics Data System (ADS)

Reid, M. E.; Brien, D. L.

2012-12-01

Slope instability in complex topography is generally controlled by the interaction between gravitationally induced stresses, 3D strengths, and 3D pore-fluid pressure fields produced by flowing groundwater. As an example of this complexity, coastal bluffs sculpted by landsliding commonly exhibit a progression of undulating headlands and re-entrants. In this landscape, stresses differ between headlands and re-entrants and 3D groundwater flow varies from vertical rainfall infiltration to lateral groundwater flow on lower permeability layers with subsequent discharge at the curved bluff faces. In plan view, groundwater flow converges in the re-entrant regions. To investigate relative slope instability induced by undulating topography, we couple the USGS 3D limit-equilibrium slope-stability model, SCOOPS, with the USGS 3D groundwater flow model, MODFLOW. By rapidly analyzing the stability of millions of potential failures, the SCOOPS model can determine relative slope stability throughout the 3D domain underlying a digital elevation model (DEM), and it can utilize both fully 3D distributions of pore-water pressure and material strength. The two models are linked by first computing a groundwater-flow field in MODFLOW, and then computing stability in SCOOPS using the pore-pressure field derived from groundwater flow. Using these two models, our analyses of 60m high coastal bluffs in Seattle, Washington showed augmented instability in topographic re-entrants given recharge from a rainy season. Here, increased recharge led to elevated perched water tables with enhanced effects in the re-entrants owing to convergence of groundwater flow. Stability in these areas was reduced about 80% compared to equivalent dry conditions. To further isolate these effects, we examined groundwater flow and stability in hypothetical landscapes composed of uniform and equally spaced, oscillating headlands and re-entrants with differing amplitudes. The landscapes had a constant slope for both headlands and re-entrants to minimize slope effects on stability. Despite these equal slopes, our analyses, given dry conditions, illustrated that the headlands can be 5-7% less stable than the re-entrants, owing to the geometry of the 3D failure mass with the lowest stability. We then simulated groundwater flow in these landscapes; flow was caused by recharge perching on a horizontal low permeability layer with discharge at the bluff faces. By systematically varying recharge, hydraulic conductivity of the material, and conductance at the bluffs, we created different 3D pore-pressure fields. Recharge rates and hydraulic conductivities controlled the height of the water table, whereas bluff conductance influenced the gradient of the water table near the bluff face. Given elevated water tables with steep gradients, bluffs in the re-entrants became unstable where flow converged. Thus, with progressively stronger effects from water flow, overall instability evolved from relatively unstable headlands to more uniform stability to relatively unstable re-entrants. Larger re-entrants led to more 3D flow convergence and greater localized instability. One- or two-dimensional models cannot fully characterize slope instability in complex topography.

Application of Spatial Neural Network Model for Optimal Operation of Urban Drainage System

NASA Astrophysics Data System (ADS)

KIM, B. J.; Lee, J. Y.; KIM, H. I.; Son, A. L.; Han, K. Y.

2017-12-01

The significance of real-time operation of drainage pump and warning system for inundation becomes recently increased in order to coping with runoff by high intensity precipitation such as localized heavy rain that frequently and suddenly happen. However existing operation of drainage pump station has been made a decision according to opinion of manager based on stage because of not expecting exact time that peak discharge occur in pump station. Therefore the scale of pump station has been excessively estimated. Although it is necessary to perform quick and accurate inundation in analysis downtown area due to huge property damage from flood and typhoon, previous studies contained risk deducting incorrect result that differs from actual result owing to the diffusion aspect of flow by effect on building and road. The purpose of this study is to develop the data driven model for the real-time operation of drainage pump station and two-dimensional inundation analysis that are improved the problems of the existing hydrology and hydrological model. Neuro-Fuzzy system for real time prediction about stage was developed by estimating the type and number of membership function. Based on forecasting stage, it was decided when pump machine begin to work and how much water scoop up by using penalizing genetic algorithm. It is practicable to forecast stage, optimize pump operation and simulate inundation analysis in real time through the methodologies suggested in this study. This study can greatly contribute to the establishment of disaster information map that prevent and mitigate inundation in urban drainage area. The applicability of the development model for the five drainage pump stations in the Mapo drainage area was verified. It is considered to be able to effectively manage urban drainage facilities in the development of these operating rules. Keywords : Urban flooding; Geo-ANFIS method; Optimal operation; Drainage system; AcknowlegementThis research was supported by a grant (17AWMP-B079625-04) from Water Management Research Program funded by Ministry of Land, Infrastructure and Transport of Korean government.

KSC-2009-1988

NASA Image and Video Library

2009-03-08

CAPE CANAVERAL, Fla. – A roseate spoonbill soars overhead against a deep blue sky covering NASA's Kennedy Space Center in Florida. Mature spoonbills feather the brilliant pink feathers with a white neck and beck and orange tails. Immature birds are white. The spoonbill is readily identified by the straight bill with a broad spatulate tip, which they use to obtain food by sweeping from side to side and scooping up whatever they encounter. They spend much of their time feeding on shrimps and fish in the shallow waters of the Florida Bay and Gulf of Mexico. Roseate spoonbills are a common sight throughout Kennedy, which shares a boundary with the Merritt Island National Wildlife Refuge. Photo credit: NASA/Kenny Allen

The Nitrate/Perchlorate Ratio on Mars as an Indicator for Habitability

NASA Technical Reports Server (NTRS)

Stern, J. C.; Sutter, B.; McKay, C. P.; Navarro-Gonzalex, R.; Freissinet, C.; Conrad, P. G.; Mahaffy, P. R.; Archer, P. D., Jr.; Ming, D. W.; Niles, P. B.;

Calcium Sulfates at Gale Crater and Limitations on Gypsum Stability

NASA Technical Reports Server (NTRS)

Vantiman, D. T.; Martinez, G. M.; Rampe, E. B.; Bristow, T. F.; Blake, D. F.; Yen, A. H.; Ming, D. W.; Rapin, W.; Meslin, P. -Y.; Morookian, J. M.;

Fish Eye View of Horizon and Lander

NASA Technical Reports Server (NTRS)

2008-01-01

North is up (12 o'clock position) in this seam-corrected 360 degree polar projection using downsampled images from sols 1 and 3. Seam boundaries show different times of day, e.g. 9 o'clock (west) position shows scoop of RA, 7 o'clock view shows the MET mast with telltale (mast contains three temperature sensors).

Note: hummocky terrain with troughs, typical of Earth polar terrain where we would see permafrost and ice beneath surface.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

First Dodo Trench with White Layer Visible in Dig Area

NASA Technical Reports Server (NTRS)

2008-01-01

These color images were taken by NASA's Phoenix Mars Lander's Stereo Surface Imager on the ninth Martian day of the mission, or Sol 9 (June 3, 2008). The images of the trench shows a white layer that has been uncovered by the Robotic Arm (RA) scoop and is now visible in the wall of the trench. This trench was the first one dug by the RA to understand the Martian soil and plan the digging strategy.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Police transport versus ground EMS: A trauma system-level evaluation of prehospital care policies and their effect on clinical outcomes.

PubMed

Wandling, Michael W; Nathens, Avery B; Shapiro, Michael B; Haut, Elliott R

2016-11-01

Rapid transport to definitive care ("scoop and run") versus field stabilization in trauma remains a topic of debate and has resulted in variability in prehospital policy. We aimed to identify trauma systems frequently using a true "scoop and run" police transport approach and to compare mortality rates between police and ground emergency medical services (EMS) transport. Using the National Trauma Databank (NTDB), we identified adult gunshot and stab wound patients presenting to Level 1 or 2 trauma centers from 2010 to 2012. Hospitals were grouped into their respective cities and regional trauma systems. Patients directly transported by police or ground EMS to trauma centers in the 100 most populous US trauma systems were included. Frequency of police transport was evaluated, identifying trauma systems with high utilization. Mortality rates and risk-adjusted odds ratio for mortality for police versus EMS transport were derived. Of 88,564 total patients, 86,097 (97.2%) were transported by EMS and 2,467 (2.8%) by police. Unadjusted mortality was 17.7% for police transport and 11.6% for ground EMS. After risk adjustment, patients transported by police were no more likely to die than those transported by EMS (OR = 1.00, 95% CI: 0.69-1.45). Among all police transports, 87.8% occurred in three locations (Philadelphia, Sacramento, and Detroit). Within these trauma systems, unadjusted mortality was 19.9% for police transport and 13.5% for ground EMS. Risk-adjusted mortality was no different (OR = 1.01, 95% CI: 0.68-1.50). Using trauma system-level analyses, patients with penetrating injuries in urban trauma systems were found to have similar mortality for police and EMS transport. The majority of prehospital police transport in penetrating trauma occurs in three trauma systems. These cities represent ideal sites for additional system-level evaluation of prehospital transport policies. Prognostic/epidemiologic study, level III.

Initial Observations and Activities of Curiosity's Mars Hand Lens Imager (MAHLI) at the Gale Field Site

NASA Astrophysics Data System (ADS)

Aileen Yingst, R.; Edgett, Kenneth; MSL Science Team

2013-04-01

The Mars Hand Lens Imager (MAHLI) is a 2-megapixel focusable macro lens color camera on the turret on the Mars Science Laboratory rover, Curiosity's, robotic arm. The investigation centers on stratigraphy, grain-scale texture, structure, mineralogy, and morphology. MAHLI acquires focused images at working distances of 2.1 cm to infinity; at 2.1 cm the scale is 14 µm/pixel; at 6.9 cm it is 31 µm/pixel, like the Spirit and Opportunity Microscopic Imagers (MI). Most MAHLI use during the first 100 Martian days (sols) was focused on instrument, rover, and robotic arm engineering check-outs and risk reduction, including (1) interrogation of an eolian sand shadow for suitability for scooping, decontamination of the sample collection and processing system (CHIMRA, Collection and Handling for In-Situ Martian Rock Analysis), and first solid sample delivery to the Chemistry and Mineralogy (CheMin) and Sample Analysis at Mars (SAM) instruments; (2) documentation of the nature of this sand; (3) verification that samples were delivered to SAM and passed through a 150 µm mesh and a 2 mm funnel throat in the CheMin inlet; (4) development of methods for future precision robotic arm positioning of MAHLI and the Alpha Particle X-Ray Spectrometer (APXS); and (5) use of MAHLI autofocus for range-finding to determine locations to position the scoop before each scooping event. Most Sol 0-100 MAHLI images were obtained at scales of 31-110 µm/pixel; some geologic targets were imaged at 21-31 µm/pixel. No opportunities to position the camera close enough to obtain 14-20 µm/pixel images were available during this initial period. Only two rocks, named Jake Matijevic and Bathurst Inlet, were imaged at a resolution higher than MI. Both were dark gray and mantled with dust and fine/very fine sand. In both cases, the highest resolution images of these rocks show no obvious, indisputable grains, suggesting that grain sizes (as expressed at the rock surfaces) are < 80 µm. However, because of the dust and sand obscuration, the observables are unclear —grains 300-500 µm size in the Bathurst Inlet images and 300-500 µm-sized rhombus-shaped crystals in the rock, Jake Matijevic have been observed by some workers. Sand and granules (as well as dust), exhibiting a variety of colors, shapes, and other grain attributes, were deposited on rover hardware during descent. As noted above, sand as well as dust also mantles the rocks observed by MAHLI; in one case the cohesive properties of this material was demonstrated by the presence of a "micro landslide" on a rock named Burwash. At the Rocknest sand shadow, a variety of coarse to very coarse sand grains of differing color, shape, luster, angularity, and roundness were observed, including glassy spheroids and ellipsoids (perhaps formed from impact melt droplets) and clear, translucent grains. The fine to very fine sands sieved (≤ 150 µm) and delivered to the rover's observation tray exhibited at least four distinct grain types, including clear, translucent crystal fragments.

Texas Automated Buoy System 1995-2005 and Beyond

NASA Astrophysics Data System (ADS)

Guinasso, N. L.; Bender, L. C.; Walpert, J. N.; Lee, L. L.; Campbell, L.; Hetland, R. D.; Howard, M. K.; Martin, R. D.

2005-05-01

TABS was established in l995 to provide data to assess oil spill movement along Texas coast for the Texas General Land Office Oil Spill Prevention and Response Program. A system of nine automated buoys provide wind and current data in near real time. Two of these buoys are supported by the Flower Garden Banks Joint Industry Program. A TABS web site provides a public interface to view and download the data. A real time data analysis web page presents a wide variety of useful data products derived from the field measurements. Integration efforts now underway include transfer of buoy data to the National Data Buoy Center for quality control and incorporation into the Global Telecommunications Stream. The TGLO ocean circulation nowcast/forecast modeling system has been in continuous operation since 1998. Two models, POM and ROMS, are used to produce forecasts of near-surface wind driven currents up to 48 hours into the future. Both models are driven using wind fields obtained from the NAM (formerly Eta) forecast models operated by NOAA NCEP. Wind and current fields are displayed on websites in both static and animated forms and are updated four times per day. Under funding from the SURA/SCOOP program we are; 1) revamping the system to conform with the evolving Data Management and Communications (DMAC) framework adopted by the NSF Orion and OCEAN.US IOOS programs, 2) producing model-data comparisons, and 3) integrating the wind and current fields into the GNOME oil trajectory model used by NOAA/Hazmat. Academic research is planned to assimilate near real-time observations from TABS buoys and some 30-40 ADCP instruments scheduled to be mounted on offshore oil platforms in early 2005. Texas Automated Buoy System (TABS) and its associated modeling efforts provide a reliable source of accurate, up-to-date information on currents along the Texas coast. As the nation embarks on the development of an Integrated Ocean Observing System (IOOS), TABS will be an active participant as a foundational regional component to the national backbone of ocean observations.

Mamun-TKC parathyroid retractor: Parathyroid glands squashed or scooped!

PubMed

Mahmud, Syed Mamun

2015-03-01

Parathyroid gland by its physiologic and anatomic diversity has interestingly been dealt by multiple specialties, including Urology. Besides primary hyperparathyroidism, urologists in close working relationship with nephrologists, tend to get referrals for tertiary hyperparathyroidism. Data from 1999 to 2012 was retrieved for all parathyroidectomies. Medical record of only cases undergoing parathyroidectomy utilising the instrument Mamun-TKC Parathyroid Retractor were reviewed. It is a metal body surgical instrument resembling Gil Vernet retractor having functional flat metal head attached to solid long handle, designed in two forms; one 'Straight' and other 'Angled' at 30°. During the period, 28 cases of parathyroidectomies were performed. The instrument was used in two cases. It was found to facilitate dissection, retraction and pedicle ligation of parathyroid gland by a-traumatic handling.

Detection of Reduced Nitrogen Compounds at Rocknest Using the Sample Analysis At Mars (SAM) Instrument on the Mars Science Laboratory (MSL)

NASA Technical Reports Server (NTRS)

Stern, J. C.; Steele, A.; Brunner, A.; Coll, P.; Eigenbrode, J.; Franz, H. B.; Freissinet, C.; Glavin, D.; Jones, J. H.; Navarro-Gonzalez, R.;

KSC-99pc0113

NASA Image and Video Library

1999-01-25

KENNEDY SPACE CENTER, FLA. -- Balancing on one leg, a roseate spoonbill is reflected in the waters of the Merritt Island National Wildlife Refuge at Kennedy Space Center. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000-acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles

US Army Armor Reference Data in Three Volumes. Volume II. Nondivisional Organizations.

DTIC Science & Technology

1981-01-01

SQuat 1r) R 2 SGI IB20 (Team Ldr) R I SP4 19GIO (Loader/Gnr) P I SP5 19G20 (St Gunner) P 1 t,5 19G20 (Sr Gunner) P I SP4 IICII ()Carrrr Dv) P 2 SP4 11810...Sergeant 2 SP4 Mat Storage Sp 1 SIC Platoon SOT1 SPC Food Svc SGT 1 SP4 Supply Con & Acct Cik 1 SP4 Lt Veh DriverI SFC Motor Sergeant I SP4 Subsistence...PLATOON Ho-.-- Loader Scoop Type 2-1/2 CU YD .Platoon Leader Tank Fabric Fuel 10,000-Gal. 1 SPC Platoon SC? 1 PFlC Reports Clerk 0lRadio Set N/VRC-46

Phoenix Again Carries Soil to Wet Chemistry Lab

NASA Technical Reports Server (NTRS)

2008-01-01

This image taken by the Surface Stereo Imager on NASA's Phoenix Mars Lander shows the lander's Robotic Arm scoop positioned over the Wet Chemistry Lab Cell 1 delivery funnel on Sol 41, the 42nd Martian day after landing, or July 6, 2008, after a soil sample was delivered to the instrument.

The instrument's Cell 1 is second one from the foreground of the image. The first cell, Cell 0, received a soil sample two weeks earlier.

This image has been enhanced to brighten the scene.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Soil! Get the Scoop - The Soil Science Society of America's International Year of Soils Campaign

NASA Astrophysics Data System (ADS)

Lindbo, David L.; Hopmans, Jan; Olson, Carolyn; Fisk, Susan; Chapman, Susan; van Es, Harold

2015-04-01

Soils are a finite natural resource and are nonrenewable on a human time scale. Soils are the foundation for food, animal feed, fuel and natural fiber production, the supply of clean water, nutrient cycling and a range of ecosystem functions. The area of fertile soils covering the world's surface is limited and increasingly subject to degradation, poor management and loss to urbanization. Increased awareness of the life-supporting functions of soil is called for if this trend is to be reversed and so enable the levels of food production necessary to meet the demands of population levels predicted for 2050. The Soil Science Society of America is coordinating with the Global Soil Partnership and other organizations around the world to celebrate the 2015 International Year of Soils and raise awareness and promote the sustainability of our limited soil resources. We all have a valuable role in communicating vital information on soils, a life sustaining natural resource. Therefore, we will provide resources to learn about soils and help us tell the story of soils. We will promote IYS on social media by sharing our posts from Facebook and Twitter. Additionally SSSA developed 12 monthly themes that reflect the diverse value of soils to our natural environment and society. Each month has information on the theme, a lesson plan, and other outreach activities. All information is available on a dedicated website www.soil.org/IYS. The site will be updated constantly throughout the year.

Nine weeks of supplementation with a multi-nutrient product augments gains in lean mass, strength, and muscular performance in resistance trained men

PubMed Central

2010-01-01

Background The purpose of this study was to compare the effects of supplementation with Gaspari Nutrition's SOmaxP Maximum Performance™ (SOmaxP) versus a comparator product (CP) containing an equal amount of creatine (4 g), carbohydrate (39 g maltodextrin), and protein (7 g whey protein hydrolysate) on muscular strength, muscular endurance, and body composition during nine weeks of intense resistance training. Methods Using a prospective, randomized, double-blind design, 20 healthy men (mean ± SD age, height, weight, % body fat: 22.9 ± 2.6 y, 178.4 ± 5.7 cm, 80.5 ± 6.6 kg, 16.6 ± 4.0%) were matched for age, body weight, resistance training history, bench press strength, bench press endurance, and percent body fat and then randomly assigned via the ABBA procedure to ingest 1/2 scoop (dissolved in 15 oz water) of SOmaxP or CP prior to, and another 1/2 scoop (dissolved in 15 oz water) during resistance exercise. Body composition (DEXA), muscular performance (1-RM bench press and repetitions to failure [RTF: 3 sets × baseline body weight, 60-sec rest between sets]), and clinical blood chemistries were measured at baseline and after nine weeks of supplementation and training. Subjects were required to maintain their normal dietary habits and follow a specific, progressive overload resistance training program (4-days/wk, upper body/lower body split) during the study. An intent-to-treat approach was used and data were analyzed via ANCOVA using baseline values as the covariate. Statistical significance was set a priori at p ≤ 0.05. Results When adjusted for initial differences, significant between group post-test means were noted in: 1-RM bench press (SOmaxP: 133.3 ± 1.3 kg [19.8% increase] vs. CP: 128.5 ± 1.3 kg [15.3% increase]; p < 0.019); lean mass (SOmaxP: 64.1 ± 0.4 kg [2.4% increase] vs. 62.8 ± 0.4 kg [0.27% increase], p < 0.049); RTF (SOmaxP: 33.3 ± 1.1 reps [44.8% increase] vs. 27.8 ± 1.1 reps [20.9% increase], p < 0.004); and fat mass (SOmaxP: 12.06 ± 0.53 kg [9.8% decrease] vs. 13.90 ± 0.53 kg [4.1% increase], p < 0.024). No statistically significant differences in vital signs (heart rate, systolic and diastolic blood pressures) or clinical blood chemistries were noted. Conclusions These data indicate that compared to CP, SOmaxP administration augments and increases gains in lean mass, bench press strength, and muscular performance during nine weeks of intense resistance training. Studies designed to confirm these results and clarify the molecular mechanisms by which SOmaxP exerts the observed salutary effects have begun. Both SOmaxP and the CP were well-tolerated, and no supplement safety issues were identified. PMID:21162744

Nine weeks of supplementation with a multi-nutrient product augments gains in lean mass, strength, and muscular performance in resistance trained men.

PubMed

Schmitz, Stephen M; Hofheins, Jennifer E; Lemieux, Robert

2010-12-16

The purpose of this study was to compare the effects of supplementation with Gaspari Nutrition's SOmaxP Maximum Performance™ (SOmaxP) versus a comparator product (CP) containing an equal amount of creatine (4 g), carbohydrate (39 g maltodextrin), and protein (7 g whey protein hydrolysate) on muscular strength, muscular endurance, and body composition during nine weeks of intense resistance training. Using a prospective, randomized, double-blind design, 20 healthy men (mean ± SD age, height, weight, % body fat: 22.9 ± 2.6 y, 178.4 ± 5.7 cm, 80.5 ± 6.6 kg, 16.6 ± 4.0%) were matched for age, body weight, resistance training history, bench press strength, bench press endurance, and percent body fat and then randomly assigned via the ABBA procedure to ingest 1/2 scoop (dissolved in 15 oz water) of SOmaxP or CP prior to, and another 1/2 scoop (dissolved in 15 oz water) during resistance exercise. Body composition (DEXA), muscular performance (1-RM bench press and repetitions to failure [RTF: 3 sets × baseline body weight, 60-sec rest between sets]), and clinical blood chemistries were measured at baseline and after nine weeks of supplementation and training. Subjects were required to maintain their normal dietary habits and follow a specific, progressive overload resistance training program (4-days/wk, upper body/lower body split) during the study. An intent-to-treat approach was used and data were analyzed via ANCOVA using baseline values as the covariate. Statistical significance was set a priori at p ≤ 0.05. When adjusted for initial differences, significant between group post-test means were noted in: 1-RM bench press (SOmaxP: 133.3 ± 1.3 kg [19.8% increase] vs. CP: 128.5 ± 1.3 kg [15.3% increase]; p < 0.019); lean mass (SOmaxP: 64.1 ± 0.4 kg [2.4% increase] vs. 62.8 ± 0.4 kg [0.27% increase], p < 0.049); RTF (SOmaxP: 33.3 ± 1.1 reps [44.8% increase] vs. 27.8 ± 1.1 reps [20.9% increase], p < 0.004); and fat mass (SOmaxP: 12.06 ± 0.53 kg [9.8% decrease] vs. 13.90 ± 0.53 kg [4.1% increase], p < 0.024). No statistically significant differences in vital signs (heart rate, systolic and diastolic blood pressures) or clinical blood chemistries were noted. These data indicate that compared to CP, SOmaxP administration augments and increases gains in lean mass, bench press strength, and muscular performance during nine weeks of intense resistance training. Studies designed to confirm these results and clarify the molecular mechanisms by which SOmaxP exerts the observed salutary effects have begun. Both SOmaxP and the CP were well-tolerated, and no supplement safety issues were identified.

KSC-00pp0151

NASA Image and Video Library

2000-01-20

KENNEDY SPACE CENTER, FLA. -- In the Merritt Island National Wildlife Refuge, a roseate spoonbill searches the water for food. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge, which shares a boundary with Kennedy Space Center, is a habitat for more than 330 species of birds, 31 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds

KSC00pp0151

NASA Image and Video Library

2000-01-20

KENNEDY SPACE CENTER, FLA. -- In the Merritt Island National Wildlife Refuge, a roseate spoonbill searches the water for food. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge, which shares a boundary with Kennedy Space Center, is a habitat for more than 330 species of birds, 31 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds

Enhanced neurite outgrowth of PC-12 cells on graphene-monolayer-coated substrates as biomimetic cues

NASA Astrophysics Data System (ADS)

Lee, Jong Ho; Shin, Yong Cheol; Jin, Oh Seong; Han, Dong-Wook; Kang, Seok Hee; Hong, Suck Won; Kim, Jong Man

2012-11-01

Neurons are electrically excitable cells that transmit and process information in the nervous system. Recently, the differentiation of human neural stem cells to neurons has been shown to be enhanced on graphene substrates, and differentiated neurons have been shown to be able to still carry electrical signals when stimulated by graphene electrodes. Graphene films grown by using chemical vapor deposition were transferred onto glass coverslips by using the scooping method and were then coated with fetal bovine serum for a neuronal cell culture. The graphene substrates as biomimetic cues have been shown to enhance the neurite outgrowth of PC-12 cells. Our findings suggest that graphene has a unique surface property that can promote neuronal cells, which should open tremendous opportunities in neuroscience, neural engineering and regenerative medicine.

Two roseate spoonbills in the Merritt Island National Wildlife Refuge

NASA Technical Reports Server (NTRS)

1999-01-01

Two roseate spoonbills wade in the waters of the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre wildlife refuge is a habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge also provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

Roseate Spoonbill feeds in the Merritt Island National Wildlife Refuge.

NASA Technical Reports Server (NTRS)

2000-01-01

In the Merritt Island National Wildlife Refuge, a roseate spoonbill searches the water for food. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge, which shares a boundary with Kennedy Space Center, is a habitat for more than 330 species of birds, 31 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

KSC00pp0153

NASA Image and Video Library

2000-01-20

KENNEDY SPACE CENTER, FLA. -- In the shallow waters of the Merritt Island National Wildlife Refuge, a roseate spoonbill squawks at nearby intruders. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge, which shares a boundary with Kennedy Space Center, is a habitat for more than 330 species of birds, 31 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds

KSC-99pp0365

NASA Image and Video Library

1999-03-19

KENNEDY SPACE CENTER, FLA. -- Two roseate spoonbills wade in the waters of the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre wildlife refuge is a habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge also provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds

KSC00pp0154

NASA Image and Video Library

2000-01-20

KENNEDY SPACE CENTER, FLA. -- A female roseate spoonbill displays her colorful wings in a mating ritual in Merritt Island National Wildlife Refuge. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge, which shares a boundary with Kennedy Space Center, is a habitat for more than 330 species of birds, 31 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds

KSC-00pp0154

NASA Image and Video Library

2000-01-20

KENNEDY SPACE CENTER, FLA. -- A female roseate spoonbill displays her colorful wings in a mating ritual in Merritt Island National Wildlife Refuge. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge, which shares a boundary with Kennedy Space Center, is a habitat for more than 330 species of birds, 31 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds

A roseate spoonbill is reflected in the water at KSC

NASA Technical Reports Server (NTRS)

1999-01-01

Balancing on one leg, a roseate spoonbill is reflected in the waters of the Merritt Island National Wildlife Refuge at Kennedy Space Center. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The refuge provides wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds. The 92,000- acre refuge is also habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles.

KSC-00pp0153

NASA Image and Video Library

2000-01-20

KENNEDY SPACE CENTER, FLA. -- In the shallow waters of the Merritt Island National Wildlife Refuge, a roseate spoonbill squawks at nearby intruders. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge, which shares a boundary with Kennedy Space Center, is a habitat for more than 330 species of birds, 31 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds

Phoenix Test Sample Site

NASA Technical Reports Server (NTRS)

2008-01-01

This image, acquired by NASA's Phoenix Mars Lander's Surface Stereo Imager on Sol 7, the seventh day of the mission (June 1, 2008), shows the so-called 'Knave of Hearts' first-dig test area to the north of the lander. The Robotic Arm's scraping blade left a small horizontal depression above where the sample was taken.

Scientists speculate that white material in the depression left by the dig could represent ice or salts that precipitated into the soil. This material is likely the same white material observed in the sample in the Robotic Arm's scoop.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Phoenix Test Sample Site in Color

NASA Technical Reports Server (NTRS)

2008-01-01

This color image, acquired by NASA's Phoenix Mars Lander's Surface Stereo Imager on Sol 7, the seventh day of the mission (June 1, 2008), shows the so-called 'Knave of Hearts' first-dig test area to the north of the lander. The Robotic Arm's scraping blade left a small horizontal depression above where the sample was taken.

Scientists speculate that white material in the depression left by the dig could represent ice or salts that precipitated into the soil. This material is likely the same white material observed in the sample in the Robotic Arm's scoop.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

KSC-04PD-0890

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. A roseate spoonbill takes flight from a lake north of Kennedy Space Center. Spoonbills are so named because of the broad spatulate tip on its long straight bill. They obtain food by sweeping their bills from side to side and scooping up whatever they encounter. The Center shares a boundary north, south and west with the 92,000-acre Merritt Island National Wildlife Refuge, which is a habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge also provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

KSC-04PD-0891

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. Roseate spoonbills and white ibis ((long, curved bill) gather in a lake north of Kennedy Space Center. Spoonbills are so named because of the broad spatulate tip on its long straight bill. They obtain food by sweeping their bills from side to side and scooping up whatever they encounter. The Center shares a boundary north, south and west with the 92,000-acre Merritt Island National Wildlife Refuge, which is a habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge also provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

A pragmatic randomised controlled trial of the effectiveness and cost-effectiveness of screening older women for the prevention of fractures: rationale, design and methods for the SCOOP study.

PubMed

Shepstone, L; Fordham, R; Lenaghan, E; Harvey, I; Cooper, C; Gittoes, N; Heawood, A; Peters, T J; O'Neill, T; Torgerson, D; Holland, R; Howe, A; Marshall, T; Kanis, J A; McCloskey, E

2012-10-01

SCOOP is a UK seven-centre, pragmatic, randomised controlled trial with 5-year follow-up, including 11,580 women aged 70 to 85 years, to assess the effectiveness and cost-effectiveness of a community-based screening programme to reduce fractures. It utilises the FRAX algorithm and DXA to assess the 10-year probability of fracture. Introduction Osteoporotic, or low-trauma, fractures present a considerable burden to the National Health Service and have major adverse effects on quality of life, disability and mortality for the individual. Methods Given the availability of efficacious treatments and a risk assessment tool based upon clinical risk factors and bone mineral density, a case exists to undertake a community-based controlled evaluation of screening for subjects at high risk of fracture, under the hypothesis that such a screening programme would reduce fractures in this population. Results This study is a UK seven-centre, unblinded, pragmatic, randomised controlled trial with a 5-year follow-up period. A total of 11,580 women, aged 70 to 85 years and not on prescribed bone protective therapy will be consented to the trial by post via primary care providing 90% power to detect an 18% decrease in fractures. Conclusions Participants will be randomised to either a screening arm or control. Those undergoing screening will have a 10-year fracture probability computed from baseline risk factors together with bone mineral density measured by DXA in selected subjects. Individuals above an age-dependent threshold of fracture probability will be recommended for treatment for the duration of the trial. Subjects in the control arm will receive 'usual care'. Participants will be followed up 6 months after randomisation and annually by postal questionnaires with independent checking of hospital and primary care records. The primary outcome will be the proportion of individuals sustaining fractures in each group. An economic analysis will be carried out to assess cost-effectiveness of screening. A qualitative evaluation will be conducted to examine the acceptability of the process to participants.

Whole-body vibration in heavy equipment operators of a front-end loader: role of task exposure and tire configuration with and without traction chains.

PubMed

Blood, Ryan P; Rynell, Patrik W; Johnson, Peter W

2012-12-01

This study measured whole-body vibration (WBV) exposures in front-end loader operators, and evaluated the effects of traction chains and work tasks on their WBV exposures. WBV exposures were measured and compared across three different front-end loader tire configurations: (a) stock rubber tires, (b) rubber tires with ladder chains, and (c) rubber tires with basket chains. The operators completed three distinct standardized tasks: driving on a city street, simulated plowing, and a simulated scooping and dumping task. A portable data acquisition system collected tri-axial time weighted and raw WBV data per ISO 2631-1 and 2631-5 standards. In addition, Global Positioning System (GPS) data were collected in order to compare loader speeds across tire conditions and the standardized tasks. Relative to the stock rubber tires, both types of tire chains significantly increased WBV exposures with the ladder chains having substantially higher WBV exposures compared to basket chains. Additionally, there were task dependent differences in WBV exposures. During the driving task, the z-axis (up and down) was the predominant exposure; the plowing task had a more even distribution of exposure across all three axes; while during scooping and dumping task, the x-axis (fore and aft) had the highest WBV exposures. The GPS data indicated that there were significant speed differences across tasks but not between the basket and ladder chain conditions. Tires with ladder chains increased the front-end loader operators' exposure to WBV above the ISO 2631-1 recommended eight hour action limit increasing risk for adverse health effects. Although more expensive, basket chains are recommended over ladder chains since they substantially lowered the front-end loader operator's exposures and may ultimately reduce vibration related wear and tear on the vehicle. In order to reduce a heavy equipment vehicle (HEV) operator's chances for developing low back pain, this study provides information that health and safety professionals can use to reduce whole-body vibration (WBV) exposures when operating front-end wheel loaders with traction chains. Copyright © 2012 National Safety Council and Elsevier Ltd. All rights reserved.

Geomorphological and Geoelectric Techniques for Kwoi's Multiple Tremor Assessment

NASA Astrophysics Data System (ADS)

Dikedi, P. N.

2017-12-01

This work epicentres on geomorphological and geoelectric techniques for multiple tremor assessment in Kwoi, Nigeria. Earth tremor occurrences have been noted by Akpan and Yakubu (2010) within the last 70 years, in nine regions in Nigeria; on September 11,12,20,22, 23 and 24, 2016, additional earth tremors rocked the village of Kwoi eleven times. Houses cracked and collapsed, a rock split and slid and smoke evolved at N9027''5.909''', E800'44.951'', from an altitude of 798m. By employing the Ohmega Meter and Schlumberger configuration, four VES points are sounded for subsurface structure characterisation. Thereafter, a cylindrical steel ring is hammered into the ground at the first point (VES 1) and earth samples are scooped from this location; this procedure is repeated for other points (VES 2, 3 and 4). Winresist, Geo-earth, and Surfer version 12.0.626 software are employed to generate geo-sections, lithology, resistivity profile, Iso resistivity and Isopach maps, of the region. Outcome of results reveal some lithological formations of lateritic topsoil, fractured basement and fresh basement; additionally, results reveal 206.6m, 90.7m, 73.2m and 99.4m fractured basement thicknesses for four points. Scooped samples are transferred to the specimen stage of a Scanning Electron Microscope (SEM). SEM images show rounded inter-granular boundaries—the granular structures act like micro-wheels making the upper crustal mass susceptible to movement at the slightest vibration. Collapsed buildings are sited around VES1 location; samples from VES 1 are the most well fragmented sample owing to multiple microfractures—this result explains why VES 1 has the thickest fractured basement. Abrupt frictional sliding occurs between networks of fault lines; there is a likelihood that friction is most intense at the rock slide site on N9027'21.516'' and E800'44.9993'', VES 1 at N9027'5.819'' and E8005'3.1120'' and smoke sites—holo-centres are suspected below these locations. The presence of borehole facilities and quarry activities around the region serve as artificial causal factors of these tremors.

Sensor fusion for antipersonnel landmine detection: a case study

NASA Astrophysics Data System (ADS)

den Breejen, Eric; Schutte, Klamer; Cremer, Frank

1999-08-01

In this paper the multi sensor fusion results obtained within the European research project GEODE are presented. The layout of the test lane and the individual sensors used are described. The implementation of the SCOOP algorithm improves the ROC curves, as the false alarm surface and the number of false alarms both are taken into account. The confidence grids, as produced by the sensor manufacturers, of the sensors are used as input for the different sensor fusion methods implemented. The multisensor fusion methods implemented are Bayes, Dempster-Shafer, fuzzy probabilities and rules. The mapping of the confidence grids to the input parameters for fusion methods is an important step. Due to limited amount of the available data the entire test lane is used for training and evaluation. All four sensor fusion methods provide better detection results than the individual sensors.

X-ray diffraction results from Mars Science Laboratory: mineralogy of Rocknest at Gale crater.

PubMed

Bish, D L; Blake, D F; Vaniman, D T; Chipera, S J; Morris, R V; Ming, D W; Treiman, A H; Sarrazin, P; Morrison, S M; Downs, R T; Achilles, C N; Yen, A S; Bristow, T F; Crisp, J A; Morookian, J M; Farmer, J D; Rampe, E B; Stolper, E M; Spanovich, N

2013-09-27

The Mars Science Laboratory rover Curiosity scooped samples of soil from the Rocknest aeolian bedform in Gale crater. Analysis of the soil with the Chemistry and Mineralogy (CheMin) x-ray diffraction (XRD) instrument revealed plagioclase (~An57), forsteritic olivine (~Fo62), augite, and pigeonite, with minor K-feldspar, magnetite, quartz, anhydrite, hematite, and ilmenite. The minor phases are present at, or near, detection limits. The soil also contains 27 ± 14 weight percent x-ray amorphous material, likely containing multiple Fe(3+)- and volatile-bearing phases, including possibly a substance resembling hisingerite. The crystalline component is similar to the normative mineralogy of certain basaltic rocks from Gusev crater on Mars and of martian basaltic meteorites. The amorphous component is similar to that found on Earth in places such as soils on the Mauna Kea volcano, Hawaii.

Roseate Spoonbills preen in the Merritt Island National Wildlife Refuge.

NASA Technical Reports Server (NTRS)

2000-01-01

In the Merritt Island National Wildlife Refuge, two roseate spoonbills mirror each other as they preen their lipstick-colored feathers. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge, which shares a boundary with Kennedy Space Center, is a habitat for more than 330 species of birds, 31 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

Roseate Spoonbill displays wings in the Merritt Island National Wildlife Refuge.

NASA Technical Reports Server (NTRS)

2000-01-01

A female roseate spoonbill displays her colorful wings in a mating ritual in Merritt Island National Wildlife Refuge. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge, which shares a boundary with Kennedy Space Center, is a habitat for more than 330 species of birds, 31 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

Roseate Spoonbill squawks at intruder in the Merritt Island National Wildlife Refuge.

NASA Technical Reports Server (NTRS)

2000-01-01

In the shallow waters of the Merritt Island National Wildlife Refuge, a roseate spoonbill squawks at nearby intruders. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge, which shares a boundary with Kennedy Space Center, is a habitat for more than 330 species of birds, 31 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

A roseate spoonbill in the Merritt Island National Wildlife Refuge

NASA Technical Reports Server (NTRS)

1999-01-01

A roseate spoonbill balancing on one leg is reflected in the waters of the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000- acre refuge is a habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge also provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

KSC-99pp0364

NASA Image and Video Library

1999-03-19

KENNEDY SPACE CENTER, FLA. -- A roseate spoonbill balancing on one leg is reflected in the waters of the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge is a habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge also provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds

KSC-00pp0155

NASA Image and Video Library

2000-01-20

KENNEY SPACE CENTER, FLA. -- A female roseate spoonbill (left) displays her colorful wings to the male at right in a mating ritual in Merritt Island National Wildlife Refuge. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge, which shares a boundary with Kennedy Space Center, is a habitat for more than 330 species of birds, 31 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds

KSC00pp0155

NASA Image and Video Library

2000-01-20

KENNEY SPACE CENTER, FLA. -- A female roseate spoonbill (left) displays her colorful wings to the male at right in a mating ritual in Merritt Island National Wildlife Refuge. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge, which shares a boundary with Kennedy Space Center, is a habitat for more than 330 species of birds, 31 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds

Sample mounts for microcrystal crystallography

NASA Technical Reports Server (NTRS)

Thorne, Robert E. (Inventor); Kmetko, Jan (Inventor); Stum, Zachary (Inventor); O'Neill, Kevin (Inventor)

2007-01-01

Sample mounts (10) for mounting microcrystals of biological macromolecules for X-ray crystallography are prepared by using patterned thin polyimide films (12) that have curvature imparted thereto, for example, by being attached to a curved outer surface of a small metal rod (16). The patterned film (12) preferably includes a tapered tip end (24) for holding a crystal. Preferably, a small sample aperture is disposed in the film for reception of the crystal. A second, larger aperture can also be provided that is connected to the sample aperture by a drainage channel, allowing removal of excess liquid and easier manipulation in viscous solutions. The curvature imparted to the film (12) increases the film's rigidity and allows a convenient scoop-like action for retrieving crystals. The polyimide contributes minimally to background and absorption, and can be treated to obtain desired hydrophobicity or hydrophilicity.

Sample mounts for microcrystal crystallography

NASA Technical Reports Server (NTRS)

O'Neill, Kevin (Inventor); Kmetko, Jan (Inventor); Thorne, Robert E. (Inventor); Stum, Zachary (Inventor)

2009-01-01

Sample mounts (10) for mounting microcrystals of biological macromolecules for X-ray crystallography are prepared by using patterned thin polyimide films (12) that have curvature imparted thereto, for example, by being attached to a curved outer surface of a small metal rod (16). The patterned film (12) preferably includes a tip end (24) for holding a crystal. Preferably, a small sample aperture is disposed in the film for reception of the crystal. A second, larger aperture can also be provided that is connected to the sample aperture by a drainage channel, allowing removal of excess liquid and easier manipulation in viscous solutions. The curvature imparted to the film (12) increases the film's rigidity and allows a convenient scoop-like action for retrieving crystals. The polyimide contributes minimally to background and absorption, and can be treated to obtain desired hydrophobicity or hydrophilicity.

Stereo View of Phoenix Test Sample Site

NASA Technical Reports Server (NTRS)

2008-01-01

This anaglyph image, acquired by NASA's Phoenix Lander's Surface Stereo Imager on Sol 7, the seventh day of the mission (June 1, 2008), shows a stereoscopic 3D view of the so-called 'Knave of Hearts' first-dig test area to the north of the lander. The Robotic Arm's scraping blade left a small horizontal depression above where the sample was taken.

Scientists speculate that white material in the depression left by the dig could represent ice or salts that precipitated into the soil. This material is likely the same white material observed in the sample in the Robotic Arm's scoop.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

KSC-04PD-0888

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. Roseate spoonbills wade in the shallow water (foreground) while white pelicans and herons gather in deeper water (background) on a lake north of Kennedy Space Center. The spoonbills are so named because of the broad spatulate tip on its long straight bill. They obtain food by sweeping their bills from side to side and scooping up whatever they encounter. The Center shares a boundary north, south and west with the 92,000-acre Merritt Island National Wildlife Refuge, which is a habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge also provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

KSC-00pp0152

NASA Image and Video Library

2000-01-20

KENNEDY SPACE CENTER, FLA. -- In the Merritt Island National Wildlife Refuge, two roseate spoonbills mirror each other as they preen their lipstick-colored feathers. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge, which shares a boundary with Kennedy Space Center, is a habitat for more than 330 species of birds, 31 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds

KSC00pp0152

NASA Image and Video Library

2000-01-20

KENNEDY SPACE CENTER, FLA. -- In the Merritt Island National Wildlife Refuge, two roseate spoonbills mirror each other as they preen their lipstick-colored feathers. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge, which shares a boundary with Kennedy Space Center, is a habitat for more than 330 species of birds, 31 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds

In-Situ XRF Measurements in Lunar Surface Exploration Using Apollo Samples as a Standard

NASA Technical Reports Server (NTRS)

Young, Kelsey E.; Evans, C.; Allen, C.; Mosie, A.; Hodges, K. V.

2011-01-01

Samples collected during the Apollo lunar surface missions were sampled and returned to Earth by astronauts with varying degrees of geological experience. The technology used in these EVAs, or extravehicular activities, included nothing more advanced than traditional terrestrial field instruments: rock hammer, scoop, claw tool, and sample bags. 40 years after Apollo, technology is being developed that will allow for a high-resolution geochemical map to be created in the field real-time. Handheld x-ray fluorescence (XRF) technology is one such technology. We use handheld XRF to enable a broad in-situ characterization of a geologic site of interest based on fairly rapid techniques that can be implemented by either an astronaut or a robotic explorer. The handheld XRF instrument we used for this study was the Innov-X Systems Delta XRF spectrometer.

Consolidated B-24M Liberator Equipped for Icing Research

NASA Image and Video Library

1946-07-21

A Consolidated B-25M Liberator modified for icing research by the National Advisory Committee for Aeronautics (NACA) Lewis Flight Propulsion Laboratory. NACA Lewis performed a limited amount of icing research during World War II, but the program expanded significantly in 1946. The accumulation of ice on aircraft was a continual problem. The ice formations could result in extra weight, aerodynamic penalties, and blockage engine inlets. Although the Lewis icing researchers utilized numerous aircraft, the program’s two workhorses were the B-24M Liberator, seen here, and a North American XB-25E Mitchell. The Consolidated Aircraft Company created the four-engine bomber in the early 1940s. During World War II the bomber was employed on long-duration bombing missions in both Europe and the Pacific. Production of the B-24M version did not begin until October 1944 with the end of the war in Europe approaching. This resulted in scores of unneeded bombers when hostilities ended. This B-24M arrived at the NACA Lewis laboratory in November 1945. At Lewis the B-24M was repeatedly modified to study ice accretion on aircraft components. Researchers analyzed different anti-icing and deicing strategies and gathered statistical ice measurement data. The B-24M was also used to study ice buildup on jet engines. A General Electric I-16 engine was installed in the aircraft’s waist compartment with an air scoop on the top of the aircraft to duct air to the engine. Water spray nozzles inside the aircraft were employed to simulate icing conditions at the turbojet’s inlet.

A static investigation of yaw vectoring concepts on two-dimensional convergent-divergent nozzles

NASA Technical Reports Server (NTRS)

Berrier, B. L.; Mason, M. L.

1983-01-01

The flow-turning capability and nozzle internal performance of yaw-vectoring nozzle geometries were tested in the NASA Langley 16-ft Transonic wind tunnel. The concept was investigated as a means of enhancing fighter jet performance. Five two-dimensional convergent-divergent nozzles were equipped for yaw-vectoring and examined. The configurations included a translating left sidewall, left and right sidewall flaps downstream of the nozzle throat, left sidewall flaps or port located upstream of the nozzle throat, and a powered rudder. Trials were also run with 20 deg of pitch thrust vectoring added. The feasibility of providing yaw-thrust vectoring was demonstrated, with the largest yaw vector angles being obtained with sidewall flaps downstream of the nozzle primary throat. It was concluded that yaw vector designs that scoop or capture internal nozzle flow provide the largest yaw-vector capability, but decrease the thrust the most.

In-Situ Operations and Planning for the Mars Science Laboratory Robotic Arm: The First 200 Sols

NASA Technical Reports Server (NTRS)

Robinson, M.; Collins, C.; Leger, P.; Carsten, J.; Tompkins, V.; Hartman, F.; Yen, J.

2013-01-01

The Robotic Arm (RA) has operated for more than 200 Martian solar days (or sols) since the Mars Science Laboratory rover touched down in Gale Crater on August 5, 2012. During the first seven months on Mars the robotic arm has performed multiple contact science sols including the positioning of the Alpha Particle X-Ray Spectrometer (APXS) and/or Mars Hand Lens Imager (MAHLI) with respect to rocks or loose regolith targets. The RA has supported sample acquisition using both the scoop and drill, sample processing with CHIMRA (Collection and Handling for In- Situ Martian Rock Analysis), and delivery of sample portions to the observation tray, and the SAM (Sample Analysis at Mars) and CHEMIN (Chemistry and Mineralogy) science instruments. This paper describes the planning and execution of robotic arm activities during surface operations, and reviews robotic arm performance results from Mars to date.

Possible Detection of Perchlorates by Evolved Gas Analysis of Rocknest Soils: Global Implication

NASA Technical Reports Server (NTRS)

Archer, P. D., Jr.; Sutter, B.; Ming, D. W.; McKay, C. P.; Navarro-Gonzalez, R.; Franz, H. B.; McAdam, A.; Mahaffy, P. R.

2013-01-01

The Sample Analysis at Mars (SAM) instrument suite on board the Mars Science Laboratory (MSL) recently ran four samples from an aeolian bedform named Rocknest. Rocknest was selected as the source of the first samples analyzed because it is representative of both windblown material in Gale crater as well as the globally-distributed dust. The four samples analyzed by SAM were portioned from the fifth scoop at this location. The material delivered to SAM passed through a 150 m sieve and should have been well mixed during the sample acquisition/ preparation/handoff process. Rocknest samples were heated to 835 C at a 35 C/minute ramp rate with a He carrier gas flow rate of 1.5 standard cubic centimeters per minute and at an oven pressure of 30 mbar. Evolved gases were detected by a quadrupole mass spectrometer (QMS).

Sampling Melt Ponds

NASA Image and Video Library

2017-12-08

On July 10, 2011, Jens Ehn of Scripps Institution of Oceanography (left), and Christie Wood of Clark University (right), scooped water from melt ponds on sea ice in the Chukchi Sea. The water was later analyzed from the Healy's onboard science lab. The ICESCAPE mission, or "Impacts of Climate on Ecosystems and Chemistry of the Arctic Pacific Environment," is a NASA shipborne investigation to study how changing conditions in the Arctic affect the ocean's chemistry and ecosystems. The bulk of the research took place in the Beaufort and Chukchi seas in summer 2010 and 2011. Credit: NASA/Kathryn Hansen NASA image use policy. NASA Goddard Space Flight Center enables NASA’s mission through four scientific endeavors: Earth Science, Heliophysics, Solar System Exploration, and Astrophysics. Goddard plays a leading role in NASA’s accomplishments by contributing compelling scientific knowledge to advance the Agency’s mission. Follow us on Twitter Like us on Facebook Find us on Instagram

Prevalence and Level of Listeria monocytogenes in Ice Cream Linked to a Listeriosis Outbreak in the United States.

PubMed

Chen, Y I; Burall, Laurel S; Macarisin, Dumitru; Pouillot, Régis; Strain, Errol; DE Jesus, Antonio J; Laasri, Anna; Wang, Hua; Ali, Laila; Tatavarthy, Aparna; Zhang, Guodong; Hu, Lijun; Day, James; Kang, Jihun; Sahu, Surasri; Srinivasan, Devayani; Klontz, Karl; Parish, Mickey; Evans, Peter S; Brown, Eric W; Hammack, Thomas S; Zink, Donald L; Datta, Atin R

2016-11-01

A most-probable-number (MPN) method was used to enumerate Listeria monocytogenes in 2,320 commercial ice cream scoops manufactured on a production line that was implicated in a 2015 listeriosis outbreak in the United States. The analyzed samples were collected from seven lots produced in November 2014, December 2014, January 2015, and March 2015. L. monocytogenes was detected in 99% (2,307 of 2,320) of the tested samples (lower limit of detection, 0.03 MPN/g), 92% of which were contaminated at <20 MPN/g. The levels of L. monocytogenes in these samples had a geometric mean per lot of 0.15 to 7.1 MPN/g. The prevalence and enumeration data from an unprecedented large number of naturally contaminated ice cream products linked to a listeriosis outbreak provided a unique data set for further understanding the risk associated with L. monocytogenes contamination for highly susceptible populations.

Cloud-Droplet Ingestion in Engine Inlets with Inlet Velocity Ratios of 1.0 and 0.7

NASA Technical Reports Server (NTRS)

Brun, Rinaldo J

1957-01-01

The paths of cloud droplets into two engine inlets have been calculated for a wide range of meteorological and flight conditions. The amount of water in droplet form ingested by the inlets and the amount and distribution of water impinging on the inlet walls are obtained from these droplet-trajectory calculations. In both types of inlet, a prolate ellipsoid of revolution represents either part or all of the forebody at the center of an annular inlet to an engine. The configurations can also represent a fuselage of an airplane with side ram-scoop inlets. The studies were made at an angle of attack of 0 degree. The principal difference between the two inlets studied is that the inlet-air velocity of one is 0.7 that of the other. The studies of the two velocity ratios lead to some important general concepts of water ingestion in inlets.

A Roseate Spoonbill hunts for food in the water.

NASA Technical Reports Server (NTRS)

1999-01-01

A Roseate Spoonbill sweeps the water for food in the Merritt Island National Wildlife Refuge, which shares a boundary with Kennedy Space Center. The brilliant pink bird is named for its straight bill with the broad spatulate tip. Preferring a habitat of mangroves, it is usually found on the coasts of southern Florida and Texas, occasionally in Louisiana., in the West Indies, Mexico and Central and South America. Spoonbills feed on shrimps and fish in shallow waters, sweeping their bills from side to side and scooping up whatever they encounter. The 92,000- acre refuge is a habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge also provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

Design and test of the 172K fluidic rudder

NASA Technical Reports Server (NTRS)

Belsterling, C. A.

1978-01-01

Progress in the development of concepts for control of aircraft without moving parts or a separate source of power is described. The design and wind tunnel tests of a full scale fluidic rudder for a Cessna 172K aircraft, intended for subsequent flight tests were documented. The 172K fluidic rudder was designed to provide a control force equivalent to 3.3 degrees of deflection of the conventional rudder. In spite of an extremely thin airfoil, cascaded fluidic amplifiers were built to fit, with the capacity for generating the required level of control force. Wind tunnel tests demonstrated that the principles of lift control using ram air power are sound and reliable under all flight conditions. The tests also demonstrated that the performance of the 172K fluidic rudder is not acceptable for flight tests until the design of the scoop is modified to prevent interference with the lift control phenomenon.

Animation of Panorama of Phoenix's Solar Panel and Robotic Arm

NASA Technical Reports Server (NTRS)

2008-01-01

[figure removed for brevity, see original site] Click on image for animation

This is an animation of panorama images of NASA's Phoenix Mars Lander's solar panel and the lander's Robotic Arm with a sample in the scoop. The image was taken just before the sample was delivered to the Optical Microscope.

The images making up this animation were taken by the lander's Surface Stereo Imager looking west during Phoenix's Sol 16 (June 10, 2008), or the 16th Martian day after landing. This view is a part of the 'mission success' panorama that will show the whole landing site in color.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Roseate Spoonbill displays wings in the Merritt Island National Wildlife Refuge.

NASA Technical Reports Server (NTRS)

2000-01-01

A female roseate spoonbill (left) displays her colorful wings to the male at right in a mating ritual in Merritt Island National Wildlife Refuge. The birds, named for their brilliant pink color and paddle-shaped bill, feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. The 92,000-acre refuge, which shares a boundary with Kennedy Space Center, is a habitat for more than 330 species of birds, 31 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

KSC-01pp1013

NASA Image and Video Library

2001-05-18

KENNEDY SPACE CENTER, FLA. -- Roseate Spoonbills stride across the lawn in front of the KSC Headquarters building. The birds, named for their brilliant pink color and paddle-shaped bill, usually feed in shallow water by swinging their bill back and forth, scooping up small fish and crustaceans. They typically inhabit mangroves on the coasts of southern Florida, Louisiana and Texas. Kennedy Space Center shares a boundary with the Merritt Island National Wildlife Refuge. The Refuge encompasses 92,000 acres that are a habitat for more than 331 species of birds, 31 mammals, 117 fishes, and 65 amphibians and reptiles. The marshes and open water of the refuge provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds, as well as a variety of insects

Test and Validation of the Mars Science Laboratory Robotic Arm

NASA Technical Reports Server (NTRS)

Robinson, M.; Collins, C.; Leger, P.; Kim, W.; Carsten, J.; Tompkins, V.; Trebi-Ollennu, A.; Florow, B.

2013-01-01

The Mars Science Laboratory Robotic Arm (RA) is a key component for achieving the primary scientific goals of the mission. The RA supports sample acquisition by precisely positioning a scoop above loose regolith or accurately preloading a percussive drill on Martian rocks or rover-mounted organic check materials. It assists sample processing by orienting a sample processing unit called CHIMRA through a series of gravity-relative orientations and sample delivery by positioning the sample portion door above an instrument inlet or the observation tray. In addition the RA facilitates contact science by accurately positioning the dust removal tool, Alpha Particle X-Ray Spectrometer (APXS) and the Mars Hand Lens Imager (MAHLI) relative to surface targets. In order to fulfill these seemingly disparate science objectives the RA must satisfy a variety of accuracy and performance requirements. This paper describes the necessary arm requirement specification and the test campaign to demonstrate these requirements were satisfied.

Deepest Trenching at Phoenix Site on Mars

NASA Technical Reports Server (NTRS)

2008-01-01

NASA's Phoenix Mars Lander widened the deepest trench it has excavated, dubbed 'Stone Soup,' (in the lower half of this image) to collect a sample from about 18 centimeters (7 inches) below the surface for analysis by the lander's wet chemistry laboratory.

Phoenix's Surface Stereo Imager took this image on Sol 95 (Aug. 30, 2008), the 95th Martian day since landing. For scale, the rock to the right of the Stone Soup trench is about 15 centimeters (6 inches) across. The lander's robotic arm scooped up a sample from the left half of the trench for delivery the following sol to the wet chemistry laboratory.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Observation of Spectral Signatures of 1/f Dynamics in Avalanches on Granular Piles

NASA Astrophysics Data System (ADS)

Kim, Yong W.; Nishino, Thomas K.

1997-03-01

Granular piles of monodisperse glass spheres, 0.46+0.03 mm in diameter, have been studied. The base diameter of the pile has been varied from 3/8" to 2" in 1/8" increments. A single-grain dispenser with greater than 95consisting of a stepping motor-actuated reciprocating arm with a single-grain scoop. Each grain is dropped on the apex of the pile with lowest possible landing velocity at intervals at least 30longer than the duration of largest avalanches for each given pile. Each grain being added and being lost in avalanches from the pile is optically detected and recorded. The power spectrum of the net addition of grains to the pile as a function of time is found to be robustly 1/f for all base sizes. A wide variety of dynamical properties of 1/f systems, as obtained from the high precision data, will be presented.

KSC-04PD-0893

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. Roseate spoonbills gather in the shallow water (foreground) of a lake north of Kennedy Space Center. In the background at left are white ibis, identified by their down-curving bills. Spoonbills are so named because of the broad spatulate tip on its long straight bill. They obtain food by sweeping their bills from side to side and scooping up whatever they encounter. The Center shares a boundary north, south and west with the 92,000-acre Merritt Island National Wildlife Refuge, which is a habitat for more than 310 species of birds, 25 mammals, 117 fishes and 65 amphibians and reptiles. The marshes and open water of the refuge also provide wintering areas for 23 species of migratory waterfowl, as well as a year-round home for great blue herons, great egrets, wood storks, cormorants, brown pelicans and other species of marsh and shore birds.

Factors associated with post-treatment E. coli contamination in households practising water treatment: a study of rural Cambodia.

PubMed

Benwic, Aaron; Kim, Erin; Khema, Cinn; Phanna, Chet; Sophary, Phan; Cantwell, Raymond E

2018-04-01

The purpose of this study was to assess factors associated with Escherichia coli (E. coli) contamination in rural households in Cambodia that have adopted household water treatment. The following factors were significantly associated (α < 0.05) with apparent E. coli contamination: cleaning the drinking vessel with untreated water, not drying the cup (with a cloth), accessing treated water by the use of a scoop (ref: using a tap), having more than one untreated water storage container, having an untreated water storage container that appeared dirty on the outside, and cows living within 10 m of the household. This study provides further evidence confirming previous studies reporting an association between inadequate cleanliness of water storage containers and household drinking water contamination, and identifies practical recommendations statistically associated with reduced post-treatment E. coli contamination in the household setting in rural Cambodia.

Plenary: Progress in Regional Landslide Hazard Assessment—Examples from the USA

USGS Publications Warehouse

Baum, Rex L.; Schulz, William; Brien, Dianne L.; Burns, William J.; Reid, Mark E.; Godt, Jonathan W.

2014-01-01

Landslide hazard assessment at local and regional scales contributes to mitigation of landslides in developing and densely populated areas by providing information for (1) land development and redevelopment plans and regulations, (2) emergency preparedness plans, and (3) economic analysis to (a) set priorities for engineered mitigation projects and (b) define areas of similar levels of hazard for insurance purposes. US Geological Survey (USGS) research on landslide hazard assessment has explored a range of methods that can be used to estimate temporal and spatial landslide potential and probability for various scales and purposes. Cases taken primarily from our work in the U.S. Pacific Northwest illustrate and compare a sampling of methods, approaches, and progress. For example, landform mapping using high-resolution topographic data resulted in identification of about four times more landslides in Seattle, Washington, than previous efforts using aerial photography. Susceptibility classes based on the landforms captured 93 % of all historical landslides (all types) throughout the city. A deterministic model for rainfall infiltration and shallow landslide initiation, TRIGRS, was able to identify locations of 92 % of historical shallow landslides in southwest Seattle. The potentially unstable areas identified by TRIGRS occupied only 26 % of the slope areas steeper than 20°. Addition of an unsaturated infiltration model to TRIGRS expands the applicability of the model to areas of highly permeable soils. Replacement of the single cell, 1D factor of safety with a simple 3D method of columns improves accuracy of factor of safety predictions for both saturated and unsaturated infiltration models. A 3D deterministic model for large, deep landslides, SCOOPS, combined with a three-dimensional model for groundwater flow, successfully predicted instability in steep areas of permeable outwash sand and topographic reentrants. These locations are consistent with locations of large, deep, historically active landslides. For an area in Seattle, a composite of the three maps illustrates how maps produced by different approaches might be combined to assess overall landslide potential. Examples from Oregon, USA, illustrate how landform mapping and deterministic analysis for shallow landslide potential have been adapted into standardized methods for efficiently producing detailed landslide inventory and shallow landslide susceptibility maps that have consistent content and format statewide.

Moving Beyond the 10,000 Ways That Don't Work

NASA Astrophysics Data System (ADS)

Bermudez, L. E.; Arctur, D. K.; Rueda, C.

2009-12-01

From his research in developing light bulb filaments, Thomas Edison provide us with a good lesson to advance any venture. He said "I have not failed, I've just found 10,000 ways that won't work." Advancing data and access interoperability is one of those ventures difficult to achieve because of the differences among the participating communities. Even within the marine domain, different communities exist and with them different technologies (formats and protocols) to publish data and its descriptions, and different vocabularies to name things (e.g. parameters, sensor types). Simplifying the heterogeneity of technologies is not only accomplished by adopting standards, but by creating profiles, and advancing tools that use those standards. In some cases, standards are advanced by building from existing tools. But what is the best strategy? Edison could provide us a hint. Prototypes and test beds are essential to achieve interoperability among geospatial communities. The Open Geospatial Consortium (OGC) calls them interoperability experiments. The World Wide Web Consortium (W3C) calls them incubator projects. Prototypes help test and refine specifications. The Marine Metadata Interoperability (MMI) Initiative, which is advancing marine data integration and re-use by promoting community solutions, understood this strategy and started an interoperability demonstration with the SURA Coastal Ocean Observing and Prediction (SCOOP) program. This interoperability demonstration transformed into the OGC Ocean Science Interoperability Experiment (Oceans IE). The Oceans IE brings together the Ocean-Observing community to advance interoperability of ocean observing systems by using OGC Standards. The Oceans IE Phase I investigated the use of OGC Web Feature Service (WFS) and OGC Sensor Observation Service (SOS) standards for representing and exchanging point data records from fixed in-situ marine platforms. The Oceans IE Phase I produced an engineering best practices report, advanced reference implementations, and submitted various change requests that are now being considered by the OGC SOS working group. Building on Phase I, and with a focus on semantically-enabled services, Oceans IE Phase II will continue the use and improvement of OGC specifications in the marine community. We will present the lessons learned and in particular the strategy of experimenting with technologies to advance standards to publish data in marine communities, which could also help advance interoperability in other geospatial communities. We will also discuss the growing collaborations among ocean-observing standards organizations that will bring about the institutional acceptance needed for these technologies and practices to gain traction globally.

The Climate Variability & Predictability (CVP) Program at NOAA - Recent Program Advancements in Understanding AMOC

NASA Astrophysics Data System (ADS)

Lucas, S. E.

2016-12-01

The Climate Variability & Predictability (CVP) Program supports research aimed at providing process-level understanding of the climate system through observation, modeling, analysis, and field studies. This vital knowledge is needed to improve climate models and predictions so that scientists can better anticipate the impacts of future climate variability and change. To achieve its mission, the CVP Program supports research carried out at NOAA and other federal laboratories, NOAA Cooperative Institutes, and academic institutions. The Program also coordinates its sponsored projects with major national and international scientific bodies including the World Climate Research Programme (WCRP), the International and U.S. Climate Variability and Predictability (CLIVAR/US CLIVAR) Program, and the U.S. Global Change Research Program (USGCRP). The CVP program sits within NOAA's Climate Program Office (http://cpo.noaa.gov/CVP). This poster will present the recently funded CVP projects on improving the understanding Atlantic Meridional Overturning Circulation (AMOC), its impact on decadal predictability, and its relationship with the overall climate system.

The PASADO core processing strategy — A proposed new protocol for sediment core treatment in multidisciplinary lake drilling projects

NASA Astrophysics Data System (ADS)

Ohlendorf, Christian; Gebhardt, Catalina; Hahn, Annette; Kliem, Pierre; Zolitschka, Bernd

2011-07-01

Using the ICDP (International Continental Scientific Drilling Program) deep lake drilling expedition no. 5022 as an example, we describe core processing and sampling procedures as well as new tools developed for subsampling. A manual core splitter is presented that is (1) mobile, (2) able to cut plastic core liners lengthwise without producing swarf of liner material and (3) consists of off-the-shelf components. In order to improve the sampling of sediment cores, a new device, the core sampling assembly (CSA), was developed that meets the following targets: (1) the partitioning of the sediment into discs of equal thickness is fast and precise, (2) disturbed sediment at the inner surface of the liner is discarded during this sampling process, (3) usage of the available sediment is optimised, (4) subsamples are volumetric and oriented, and (5) identical subsamples are taken. The CSA can be applied to D-shaped split sediment cores of any diameter and consists of a divider and a D-shaped scoop. The sampling plan applied for ICDP expedition 5022 is illustrated and may be used as a guideline for planning the efficient partitioning of sediment amongst different lake research groups involved in multidisciplinary projects. For every subsample, the use of quality flags is suggested (1) to document the sample condition, (2) to give a first sediment classification and (3) to guarantee a precise adjustment of logging and scanning data with data determined on individual samples. Based on this, we propose a protocol that might be applied across lake drilling projects in order to facilitate planning and documentation of sampling campaigns and to ensure a better comparability of results.

Is there one optimal medical treatment and evacuation chain for all situations: "scoop-and-run" or "stay-and-play".

PubMed

Hoejenbos, Maarten J J; McManus, John; Hodgetts, Timothy

2008-01-01

In 2006, the Ministry of Defense of the Netherlands initiated a targeted agenda program for the World Congress on Disaster and Emergency Medicine in Amsterdam in 2007 (15WCDEM). The issue to be discussed was if there is one "golden" treatment and evacuation system that is applicable for different military and civilian situations. And, if there is not such a system, which parameters are important to construct the most optimal system for each different situation. This issue is related to the applicability and evidence base of the standards of the North Atlantic Treaty Organization. A group of experts started a website discussion on the issue during December 2006. During the 15WCDEM, several other participants were active in the discussion. Using the different experiences and the outcome of the discussions, it was concluded that there is not one "golden" medical emergency system, there are no "golden" timelines, and no "golden" skills. A medical system should be flexible and be able to adjust on each specific, local situation. First responder and non-medical people with medical skills (first responders) are essential in the front line of the emergency medical systems. More research is needed on the medical techniques and skills that are most effective early in the treatment and evacuation systems. Lessons learned from the military system are relevant for the civilian emergency medical services and vice-versa. The World Association for Disaster and Emergency Medicine can be an important platform to share and exchange information between these two systems. The target of the platform should be to obtain a generic picture of the important elements in prehospital emergency medical care.

The MSP 2001 Mars Environmental Compatibility Assessment (MECA)

NASA Technical Reports Server (NTRS)

Hecht, M. H.; Meloy, T. P.; Anderson, M. S.; Buehler, M. G.; Frant, M. A.; Grannan, S. M.; Fuerstenau, S. D.; Keller, H. U.; Markiewicz, W. J.; Marshall, J.

1999-01-01

A chemical analysis of soil-water mixtures and the first microscopic images of martian soil will be among the results to be returned by the Mars Environmental Compatibility Assessment (MECA) payload on the Mars Surveyor Program 2001 Lander. Sponsored by the Human Exploration and Development of Space (HEDS) enterprise, MECA's primary goal is to evaluate potential geochemical and environmental hazards that may confront future martian explorers, and to guide HEDS scientists in the development of high fidelity Mars soil simulants. As a survey of soil properties, the MECA data set will also be rich in information relevant to basic geology, paleoclimate, and exobiology. The integrated MECA payload contains a wet-chemistry laboratory, a microscopy station, an electrometer to characterize the electrostatics of the soil and its environment, and arrays of material patches to study the abrasive and adhesive properties of soil grains. MECA is allocated a mass of 10 kg and a peak power usage of 15 W within an enclosure of 35 x 25 x 15 cm. The Wet Chemistry Laboratory (WCL) consists of four identical cells that will accept samples from surface and subsurface regions accessible to the Lander's robotic arm, mix them with water, and perform extensive analysis of the solution. Ion-selective electrodes and related sensors will evaluate total dissolved solids, redox potential, pH, and the concentration of many soluble ions and gases. Cyclic voltammetry will address oxidants, and anodic stripping voltammetry will probe potentially hazardous trace metals. MECA's microscopy station combines optical and atomic-force microscopy (AFM) in a controlled illumination environment to image dust and soil particles from millimeters to nanometers in size. Careful selection of substrates and an abrasion tool allows experimental study of size distribution, adhesion, abrasion, hardness, color, shape, aggregation, magnetic and other properties. Mounted on the end of the robot arm, MECA's electrometer consists of four types of sensors: an electric field meter, several triboelectricity monitors, an ion gauge, and a thermometer. Tempered only by ultra-violet- light-induced ions and a low-voltage break-down threshold, the dry, cold, dusty martian environment presents an imposing electrostatic hazard to both robots and humans. In addition, the electrostatic environment is key to transport of dust and, consequently, martian meteorology. MECA will also observe natural dust accumulation on engineering materials. Viewed with the robot arm camera, the abrasion and adhesion plates are strategically placed to allow direct observation of the inter-action between materials and soils on a macroscopic scale. Materials of graded hardness are placed directly under the robot arm scoop to sense wear and soil hardness. A second array, placed on the lander deck, is deployed after the dust plume of landing has settled. It can be manipulated in a primitive fashion by the arm, first having dirt deposited on it from the scoop and subsequently shaken clean. Dust accumulation as a function of conductivity, magnetic field strength, and other parameters will be explored. The MECA instruments described above will assess potential hazards that the Martian soil might present to human explorers and their equipment. In addition, MECA will provide information on the composition of ancient surface water environments, observing microscopic evidence of geological (and biological?) processes, inferring soil and dust transport, comminution and weathering mechanisms, and characterizing soil horizons that might be encountered during excavation. Additional information is contained in the original extended abstract.

High Speed Research Noise Prediction Code (HSRNOISE) User's and Theoretical Manual

NASA Technical Reports Server (NTRS)

Golub, Robert (Technical Monitor); Rawls, John W., Jr.; Yeager, Jessie C.

2004-01-01

This report describes a computer program, HSRNOISE, that predicts noise levels for a supersonic aircraft powered by mixed flow turbofan engines with rectangular mixer-ejector nozzles. It fully documents the noise prediction algorithms, provides instructions for executing the HSRNOISE code, and provides predicted noise levels for the High Speed Research (HSR) program Technology Concept (TC) aircraft. The component source noise prediction algorithms were developed jointly by Boeing, General Electric Aircraft Engines (GEAE), NASA and Pratt & Whitney during the course of the NASA HSR program. Modern Technologies Corporation developed an alternative mixer ejector jet noise prediction method under contract to GEAE that has also been incorporated into the HSRNOISE prediction code. Algorithms for determining propagation effects and calculating noise metrics were taken from the NASA Aircraft Noise Prediction Program.

Propeller aircraft interior noise model utilization study and validation

NASA Technical Reports Server (NTRS)

Pope, L. D.

1984-01-01

Utilization and validation of a computer program designed for aircraft interior noise prediction is considered. The program, entitled PAIN (an acronym for Propeller Aircraft Interior Noise), permits (in theory) predictions of sound levels inside propeller driven aircraft arising from sidewall transmission. The objective of the work reported was to determine the practicality of making predictions for various airplanes and the extent of the program's capabilities. The ultimate purpose was to discern the quality of predictions for tonal levels inside an aircraft occurring at the propeller blade passage frequency and its harmonics. The effort involved three tasks: (1) program validation through comparisons of predictions with scale-model test results; (2) development of utilization schemes for large (full scale) fuselages; and (3) validation through comparisons of predictions with measurements taken in flight tests on a turboprop aircraft. Findings should enable future users of the program to efficiently undertake and correctly interpret predictions.

Accomplishing Mars exploration goals by returning a simple "locality" sample

NASA Astrophysics Data System (ADS)

McKay, G.; Draper, D.; Bogard, D.; Agee, C.; Ming, D.; Jones, J.

A major stumbling block to a Mars sample return (MSR) mission is cost. This problem is greatly exacerbated by using elaborate rovers, sophisticated on-board instruments, and complex sample selection techniques to maximize diversity. We argue that many key science goals of the Mars Exploration Program may be accomplished by returning a simple "locality" sample from a well-chosen landing site. Such a sample , collected by a simple scoop, would consist of local regolith containing soil, windblown fines, and lithic fragments (plus Martian atmosphere). Even the simplest sample return mission could revolutionize our understanding of Mars, without the need for expensive rovers or sophisticated on-board instruments. We expect that by the time a MSR mission could be flown, information from the Mars Odyssey, Mars Express, 2003 Mars Exploration Rovers, and 2005 Mars Reconnaissance Orbiter will be sufficient to choose a good landing site. Returned samples of Martian regolith have the potential to answer key questions of fundamental importance to the Mars Exploration Program: The search for life; the role and history of water and other volatiles; interpreting remotely-sensed spectral data; and understanding the planet as a system. A locality sample can further the search for life by identifying trace organics, biogenic elements and their isotopic compositions, evidence for water such as hydrous minerals or cements, the Martian soil oxidant, and trace biomarkers. Learning the nature and timing of atmosphere-soil-rock interactions will improve understanding of the role and history of water. An atmosphere sample will reveal fundamental information about current atmospheric processes. Information about the mineralogy and lithology of sample materials, the extent of impact gardening, and the nature of dust coatings and alteration rinds will provide much-needed ground truth for interpreting remotely-sensed data, including Mars Pathfinder. Basic planetology questions that might be answered include the compositions and ages of the highlands or lowlands, and how wet Mars was, and at what time in its history. By bringing a simple locality sample back for analysis in the world's best labs, using the world's most sophisticated state-of-the-art instruments, we can make break-through progress in addressing fundamental questions about Mars.

[Development of a predictive program for microbial growth under various temperature conditions].

PubMed

Fujikawa, Hiroshi; Yano, Kazuyoshi; Morozumi, Satoshi; Kimura, Bon; Fujii, Tateo

2006-12-01

A predictive program for microbial growth under various temperature conditions was developed with a mathematical model. The model was a new logistic model recently developed by us. The program predicts Escherichia coli growth in broth, Staphylococcus aureus growth and its enterotoxin production in milk, and Vibrio parahaemolyticus growth in broth at various temperature patterns. The program, which was built with Microsoft Excel (Visual Basic Application), is user-friendly; users can easily input the temperature history of a test food and obtain the prediction instantly on the computer screen. The predicted growth and toxin production can be important indices to determine whether a food is microbiologically safe or not. This program should be a useful tool to confirm the microbial safety of commercial foods.

Subseasonal-to-Seasonal Science and Prediction Initiatives of the NOAA MAPP Program

NASA Astrophysics Data System (ADS)

Archambault, H. M.; Barrie, D.; Mariotti, A.

2016-12-01

There is great practical interest in developing predictions beyond the 2-week weather timescale. Scientific communities have historically organized themselves around the weather and climate problems, but the subseasonal-to-seasonal (S2S) timescale range overall is recognized as new territory for which a concerted shared effort is needed. For instance, the climate community, as part of programs like CLIVAR, has historically tackled coupled phenomena and modeling, keys to harnessing predictability on longer timescales. In contrast, the weather community has focused on synoptic dynamics, higher-resolution modeling, and enhanced model initialization, of importance at the shorter timescales and especially for the prediction of extremes. The processes and phenomena specific to timescales between weather and climate require a unified approach to science, modeling, and predictions. Internationally, the WWRP/WCRP S2S Prediction Project is a promising catalyzer for these types of activities. Among the various contributing U.S. research programs, the Modeling, Analysis, Predictions and Projections (MAPP) program, as part of the NOAA Climate Program Office, has launched coordinated research and transition activities that help to meet the agency's goals to fill the weather-to-climate prediction gap and will contribute to advance international goals. This presentation will describe ongoing MAPP program S2S science and prediction initiatives, specifically the MAPP S2S Task Force and the SubX prediction experiment.

Prediction monitoring and evaluation program; a progress report

USGS Publications Warehouse

Hunter, R.N.; Derr, J.S.

1978-01-01

As part of an attempt to separate useful predictions from inaccurate guesses, we have kept score on earthquake predictions from all sources brought to our attention over the past year and a half. The program was outlined in "Earthquake Prediction;Fact and Fallacy" by Roger N. Hunter (Earthquake Information Bulletin, vol. 8, no. 5, September-October 1976, p. 24-25). The program attracted a great deal of public attention, and, as a result, our files now contain over 2500 predictions from more than 230 different people. 

Predictors of Program Use and Child and Parent Outcomes of A Brief Online Parenting Intervention.

PubMed

Baker, Sabine; Sanders, Matthew R

2017-10-01

Web-based parenting interventions have the potential to increase the currently low reach of parenting programs, but few evidence-based online programs are available, and little is known about who benefits from this delivery format. This study investigated if improvements in child behavior and parenting, following participation in a brief online parenting program (Triple P Online Brief), can be predicted by family and program-related factors. Participants were 100 parents of 2-9-year-old children displaying disruptive behavior problems. Regression analyses showed that higher baseline levels of child behavior problems, older parental age and more intense conflict over parenting pre-intervention predicted greater improvement in child behavior at 9-month follow-up. Improvement in parenting was predicted by higher pre-intervention levels of ineffective parenting. Family demographics, parental adjustment and program related factors did not predict treatment outcomes. Younger child age and lower disagreement over parenting pre-intervention predicted completion of the recommended minimum dose of the program.

FLAPS (Fatigue Life Analysis Programs): Computer Programs to Predict Cyclic Life Using the Total Strain Version of Strainrange Partitioning and Other Life Prediction Methods. Users' Manual and Example Problems, Version 1.0

NASA Technical Reports Server (NTRS)

Arya, Vinod K.; Halford, Gary R. (Technical Monitor)

2003-01-01

This manual presents computer programs FLAPS for characterizing and predicting fatigue and creep-fatigue resistance of metallic materials in the high-temperature, long-life regime for isothermal and nonisothermal fatigue. The programs use the Total Strain version of Strainrange Partitioning (TS-SRP), and several other life prediction methods described in this manual. The user should be thoroughly familiar with the TS-SRP and these life prediction methods before attempting to use any of these programs. Improper understanding can lead to incorrect use of the method and erroneous life predictions. An extensive database has also been developed in a parallel effort. The database is probably the largest source of high-temperature, creep-fatigue test data available in the public domain and can be used with other life-prediction methods as well. This users' manual, software, and database are all in the public domain and can be obtained by contacting the author. The Compact Disk (CD) accompanying this manual contains an executable file for the FLAPS program, two datasets required for the example problems in the manual, and the creep-fatigue data in a format compatible with these programs.

Mark Left by First Dig at Phoenix Site

NASA Technical Reports Server (NTRS)

2008-01-01

The hole in the ground produced by the first Robotic Arm dig at the landing site of NASA's Phoenix Mars Mission appears to the right of the three largest rocks near the center of this image.

The hole is the width of the scoop on the end of the arm, about 9 centimeters (3.5 inches). It resulted from a practice dig during the mission's seventh Martian day, or sol 7 (June 1, 2008). The lander's Surface Stereo Imager took this image later that sol. The image is in approximately true color, produced by combining exposures taken through different filters. The green band at upper left is a portion where imaging data was incomplete in for one of the filters.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Characterizing the Performance of the Wheel Electrostatic Spectrometer

NASA Technical Reports Server (NTRS)

Johansen, Michael R.; Mackey, P. J.; Holbert, E.; Calle, C. I.; Clements, J. S.

2013-01-01

Insulators need to be discharged after each wheel revolution. Sensor responses repeatable within one standard deviation in the noise of the signal. Insulators may not need to be cleaned after each revolution. Parent Technology- Mars Environmental Compatibility Assessment/Electrometer Electrostatic sensors with dissimilar cover insulators Protruding insulators tribocharge against regolith simulant Developed for use on the scoop for the 2001 Mars Odyssey lander Wheel Electrostatic Spectrometer Embedded electrostatic sensors in prototype Martian rover wheel If successful, this technology will enable constant electrostatic testing on Mars Air ionizing fan used to neutralize the surface charge on cover insulators . WES rolled on JSClA lunar simulant Control experiment -Static elimination not conducted between trials -Capacitor discharged after each experiment Charge neutralization experiment -Static elimination conducted between trials -Capacitor discharged after each experiment. Air ionizing fan used on insulators after each wheel revolution Capacitor discharged after each trial Care was taken to roll WES with same speed/pressure Error bars represent one standard deviation in the noise of e ach sensor

Crystal-Chemical Analysis Martian Minerals in Gale Crater

NASA Technical Reports Server (NTRS)

Morrison, S. M.; Downs, R. T.; Blake, D. F.; Bish, D. L.; Ming, D. W.; Morris, R. V.; Yen, A. S.; Chipera, S. J.; Treiman, A. H.; Vaniman, D. T.;

A Field-Based Cleaning Protocol for Sampling Devices Used in Life-Detection Studies

NASA Astrophysics Data System (ADS)

Eigenbrode, Jennifer; Benning, Liane G.; Maule, Jake; Wainwright, Norm; Steele, Andrew; Amundsen, Hans E. F.

2009-06-01

Analytical approaches to extant and extinct life detection involve molecular detection often at trace levels. Thus, removal of biological materials and other organic molecules from the surfaces of devices used for sampling is essential for ascertaining meaningful results. Organic decontamination to levels consistent with null values on life-detection instruments is particularly challenging at remote field locations where Mars analog field investigations are carried out. Here, we present a seven-step, multi-reagent decontamination method that can be applied to sampling devices while in the field. In situ lipopolysaccharide detection via low-level endotoxin assays and molecular detection via gas chromatography-mass spectrometry were used to test the effectiveness of the decontamination protocol for sampling of glacial ice with a coring device and for sampling of sediments with a rover scoop during deployment at Arctic Mars-analog sites in Svalbard, Norway. Our results indicate that the protocols and detection technique sufficiently remove and detect low levels of molecular constituents necessary for life-detection tests.

The Phoenix Mars Lander Robotic Arm

NASA Technical Reports Server (NTRS)

Bonitz, Robert; Shiraishi, Lori; Robinson, Matthew; Carsten, Joseph; Volpe, Richard; Trebi-Ollennu, Ashitey; Arvidson, Raymond E.; Chu, P. C.; Wilson, J. J.; Davis, K. R.

2009-01-01

The Phoenix Mars Lander Robotic Arm (RA) has operated for over 150 sols since the Lander touched down on the north polar region of Mars on May 25, 2008. During its mission it has dug numerous trenches in the Martian regolith, acquired samples of Martian dry and icy soil, and delivered them to the Thermal Evolved Gas Analyzer (TEGA) and the Microscopy, Electrochemistry, and Conductivity Analyzer (MECA). The RA inserted the Thermal and Electrical Conductivity Probe (TECP) into the Martian regolith and positioned it at various heights above the surface for relative humidity measurements. The RA was used to point the Robotic Arm Camera to take images of the surface, trenches, samples within the scoop, and other objects of scientific interest within its workspace. Data from the RA sensors during trenching, scraping, and trench cave-in experiments have been used to infer mechanical properties of the Martian soil. This paper describes the design and operations of the RA as a critical component of the Phoenix Mars Lander necessary to achieve the scientific goals of the mission.

A methodology using GIS, aerial photos and remote sensing for loss estimation and flood vulnerability analysis in the Supersano-Ruffano-Nociglia Graben, southern Italy

NASA Astrophysics Data System (ADS)

Forte, F.; Strobl, R. O.; Pennetta, L.

2006-07-01

The impact of calamitous meteoric events and their interaction with the geological and geomorphological environment represent a current problem of the Supersano-Ruffano-Nociglia Graben in southern Italy. Indeed, severe floods take place on a frequent basis not only in autumn and winter, but in summer also. These calamities are not only triggered by exceptional events, but are also amplified by peculiar geological and morpho-structural characteristics of the Graben. Flooding often affects vast agricultural areas and consequently, water-scooping machines cannot remove the rainwater. These events cause warnings and emergency states, involving people as well as socio economic goods. This study represents an application of a vanguard technique for loss estimation and flood vulnerability analysis, integrating a geographic information system (GIS) with aerial photos and remote sensing methods. The analysis results clearly show that the Graben area is potentially at greatest flood vulnerability, while along the Horsts the flood vulnerability is lower.

Development of candidate reference materials for the measurement of lead in bone

PubMed Central

Hetter, Katherine M.; Bellis, David J.; Geraghty, Ciaran; Todd, Andrew C.; Parsons, Patrick J.

2010-01-01

The production of modest quantities of candidate bone lead (Pb) reference materials is described, and an optimized production procedure is presented. The reference materials were developed to enable an assessment of the interlaboratory agreement of laboratories measuring Pb in bone; method validation; and for calibration of solid sampling techniques such as laser ablation ICP-MS. Long bones obtained from Pb-dosed and undosed animals were selected to produce four different pools of a candidate powdered bone reference material. The Pb concentrations of these pools reflect both environmental and occupational exposure levels in humans. The animal bones were harvested post mortem, cleaned, defatted, and broken into pieces using the brittle fracture technique at liquid nitrogen temperature. The bone pieces were then ground in a knife mill to produce fragments of 2-mm size. These were further ground in an ultra-centrifugal mill, resulting in finely powdered bone material that was homogenized and then sampled-scooped into vials. Testing for contamination and homogeneity was performed via instrumental methods of analysis. PMID:18421443

A field-based cleaning protocol for sampling devices used in life-detection studies.

PubMed

Eigenbrode, Jennifer; Benning, Liane G; Maule, Jake; Wainwright, Norm; Steele, Andrew; Amundsen, Hans E F

2009-06-01

Analytical approaches to extant and extinct life detection involve molecular detection often at trace levels. Thus, removal of biological materials and other organic molecules from the surfaces of devices used for sampling is essential for ascertaining meaningful results. Organic decontamination to levels consistent with null values on life-detection instruments is particularly challenging at remote field locations where Mars analog field investigations are carried out. Here, we present a seven-step, multi-reagent decontamination method that can be applied to sampling devices while in the field. In situ lipopolysaccharide detection via low-level endotoxin assays and molecular detection via gas chromatography-mass spectrometry were used to test the effectiveness of the decontamination protocol for sampling of glacial ice with a coring device and for sampling of sediments with a rover scoop during deployment at Arctic Mars-analog sites in Svalbard, Norway. Our results indicate that the protocols and detection technique sufficiently remove and detect low levels of molecular constituents necessary for life-detection tests.

Sun Series program for the REEDA System. [predicting orbital lifetime using sunspot values

NASA Technical Reports Server (NTRS)

Shankle, R. W.

1980-01-01

Modifications made to data bases and to four programs in a series of computer programs (Sun Series) which run on the REEDA HP minicomputer system to aid NASA's solar activity predictions used in orbital life time predictions are described. These programs utilize various mathematical smoothing technique and perform statistical and graphical analysis of various solar activity data bases residing on the REEDA System.

Development of a predictive program for Vibrio parahaemolyticus growth under various environmental conditions.

PubMed

Fujikawa, Hiroshi; Kimura, Bon; Fujii, Tateo

2009-09-01

In this study, we developed a predictive program for Vibrio parahaemolyticus growth under various environmental conditions. Raw growth data was obtained with a V. parahaemolyticus O3:K6 strain cultured at a variety of broth temperatures, pH, and salt concentrations. Data were analyzed with our logistic model and the parameter values of the model were analyzed with polynomial equations. A prediction program consisting of the growth model and the polynomial equations was then developed. After the range of the growth environments was modified, the program successfully predicted the growth for all environments tested. The program could be a useful tool to ensure the bacteriological safety of seafood.

Space shuttle main engine plume radiation model

NASA Technical Reports Server (NTRS)

Reardon, J. E.; Lee, Y. C.

1978-01-01

The methods are described which are used in predicting the thermal radiation received by space shuttles, from the plumes of the main engines. Radiation to representative surface locations were predicted using the NASA gaseous plume radiation GASRAD program. The plume model is used with the radiative view factor (RAVFAC) program to predict sea level radiation at specified body points. The GASRAD program is described along with the predictions. The RAVFAC model is also discussed.

Computer programs to predict induced effects of jets exhausting into a crossflow

NASA Technical Reports Server (NTRS)

Perkins, S. C., Jr.; Mendenhall, M. R.

1984-01-01

A user's manual for two computer programs was developed to predict the induced effects of jets exhausting into a crossflow. Program JETPLT predicts pressures induced on an infinite flat plate by a jet exhausting at angles to the plate and Program JETBOD, in conjunction with a panel code, predicts pressures induced on a body of revolution by a jet exhausting normal to the surface. Both codes use a potential model of the jet and adjacent surface with empirical corrections for the viscous or nonpotential effects. This program manual contains a description of the use of both programs, instructions for preparation of input, descriptions of the output, limitations of the codes, and sample cases. In addition, procedures to extend both codes to include additional empirical correlations are described.

Search for Functional Flexible Regions in the G-protein Family: New Reading of the FoldUnfold Program.

PubMed

Galzitskaya, Oxana; Deryusheva, Eugenia; Machulin, Andrey; Nemashkalova, Ekaterina; Glyakina, Anna

2018-06-21

High prediction accuracy of flexible loops in different protein families is a challenge because of the crucial functions associated with these regions. Results of the currently available programs for prediction of loops vary from protein to protein. For prediction of flexible regions in the G-domain for 23 representatives of G-proteins with the known 3D structure we have used eight programs. The results of predictions demonstrate that the FoldUnfold program predicts better loop positions than the PONDR, RОNN, DisEMBL, IUPred, GlobPlot 2, FoldIndex, and MobiDB programs. When classifying the predicted loops (rigid/flexible) according to the Debye-Waller fluctuation factors, our data reveal the existing weak correlation between the B-factors and the average number of closed residues according to the FoldUnfold program; the percentage of overlapping characteristics (residue fold/unfold status) of the protein residues from the two methods is about 60-70%. According to the FoldUnfold program, for G-proteins with the posttranslational modifications, the surrounding binding site residues by disordered-promoting glycine and alanine residues conduces to a more flexible position of the binding sites for fatty acid, while methionine, cysteine and isoleucine residues provide more rigid binding sites. Thus, our research demonstrates additional possibilities of the FoldUnfold program for prediction of flexible regions and characteristics of individual residues in a different protein family. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Aircraft Noise Prediction Program theoretical manual: Propeller aerodynamics and noise

NASA Technical Reports Server (NTRS)

Zorumski, W. E. (Editor); Weir, D. S. (Editor)

1986-01-01

The prediction sequence used in the aircraft noise prediction program (ANOPP) is described. The elements of the sequence are called program modules. The first group of modules analyzes the propeller geometry, the aerodynamics, including both potential and boundary-layer flow, the propeller performance, and the surface loading distribution. This group of modules is based entirely on aerodynamic strip theory. The next group of modules deals with the first group. Predictions of periodic thickness and loading noise are determined with time-domain methods. Broadband noise is predicted by a semiempirical method. Near-field predictions of fuselage surface pressrues include the effects of boundary layer refraction and scattering. Far-field predictions include atmospheric and ground effects.

EPA'S TOXCAST PROGRAM FOR PREDICTING TOXICITY AND PRIORITIZING ENVIRONMENTAL CHEMICALS

EPA Science Inventory

ToxCast is a research program to predict or forecast toxicity by evaluating a broad spectrum of chemicals and effects; physical-chemical properties, predicted bioactivities, HTS and cell-based assays, and genomics. Data will be interpretively linked to known or predicted toxicol...

IceBreaker: Mars Drill and Sample Delivery System

NASA Astrophysics Data System (ADS)

Mellerowicz, B. L.; Paulsen, G. L.; Zacny, K.; McKay, C.; Glass, B. J.; Dave, A.; Davila, A. F.; Marinova, M.

2012-12-01

We report on the development and testing of a one meter class prototype Mars drill and cuttings sample delivery system. The IceBreaker drill consists of a rotary-percussive drill head, a sampling auger with a bit at the end having an integrated temperature sensor, a Z-stage for advancing the auger into the ground, and a sam-pling station for moving the augered ice shavings or soil cuttings into a sample cup. The drill is deployed from a 3 Degree of Freedom (DOF) robotic arm. The drill demonstrated drilling in ice-cemented ground, ice, and rocks at the 1-1-100-100 level; that is the drill reached 1 meter in 1 hour with 100 Watts of power and 100 Newton Weight on Bit. This cor-responds to an average energy of 100 Whr. The drill has been extensively tested in the Mars chamber to a depth of 1 meter, as well as in the Antarctic and the Arctic Mars analog sites. We also tested three sample delivery systems: 1) 4 DOF arm with a custom soil scoop at the end; 2) Pneumatic based, and 3) Drill based enabled by the 3 (DOF) drill deployment boom. In all approaches there is an air-gap between the sterilized drill (which penetrates subsurface) and the sample transfer hardware (which is not going to be sterilized). The air gap satisfies the planetary protection requirements. The scoop acquires cuttings sample once they are augered to the surface, and drops them into an in-strument inlet port. The system has been tested in the Mars chamber and in the Arctic. The pneumatic sample delivery system uses compressed gas to move the sample captured inside a small chamber inte-grated with the auger, directly into the instrument. The system was tested in the Mars chamber. In the third approach the drill auger captures the sample on its flutes, the 3 DOF boom positions the tip of the auger above the instrument, and then the auger discharges the sample into an instrument. This approach was tested in the labolatory (at STP). The above drilling and sample delivery tests have shown that drilling and sample transfer on Mars, in ice cemented ground with limited power, energy and Weight on Bit, and collecting samples in dis-crete depth intervals is possible within the given mass, power, and energy levels of a Phoenix-size lander and within the duration of a Phoenix-like mission.

COSIM: A Finite-Difference Computer Model to Predict Ternary Concentration Profiles Associated With Oxidation and Interdiffusion of Overlay-Coated Substrates

NASA Technical Reports Server (NTRS)

Nesbitt, James A.

2001-01-01

A finite-difference computer program (COSIM) has been written which models the one-dimensional, diffusional transport associated with high-temperature oxidation and interdiffusion of overlay-coated substrates. The program predicts concentration profiles for up to three elements in the coating and substrate after various oxidation exposures. Surface recession due to solute loss is also predicted. Ternary cross terms and concentration-dependent diffusion coefficients are taken into account. The program also incorporates a previously-developed oxide growth and spalling model to simulate either isothermal or cyclic oxidation exposures. In addition to predicting concentration profiles after various oxidation exposures, the program can also be used to predict coating life based on a concentration dependent failure criterion (e.g., surface solute content drops to 2%). The computer code is written in FORTRAN and employs numerous subroutines to make the program flexible and easily modifiable to other coating oxidation problems.

Using Predictive Analytics to Detect Major Problems in Department of Defense Acquisition Programs

DTIC Science & Technology

2012-03-01

research is focused on three questions. First, can we predict the contractor provided estimate at complete (EAC)? Second, can we use those predictions to...develop an algorithm to determine if a problem will occur in an acquisition program or sub-program? Lastly, can we provide the probability of a problem...more than doubling the probability of a problem occurrence compared to current tools in the cost community. Though program managers can use this

The Use of Linear Programming for Prediction.

ERIC Educational Resources Information Center

Schnittjer, Carl J.

The purpose of the study was to develop a linear programming model to be used for prediction, test the accuracy of the predictions, and compare the accuracy with that produced by curvilinear multiple regression analysis. (Author)

The Climate Variability & Predictability (CVP) Program at NOAA - Recent Program Advancements

NASA Astrophysics Data System (ADS)

Lucas, S. E.; Todd, J. F.

2015-12-01

The Climate Variability & Predictability (CVP) Program supports research aimed at providing process-level understanding of the climate system through observation, modeling, analysis, and field studies. This vital knowledge is needed to improve climate models and predictions so that scientists can better anticipate the impacts of future climate variability and change. To achieve its mission, the CVP Program supports research carried out at NOAA and other federal laboratories, NOAA Cooperative Institutes, and academic institutions. The Program also coordinates its sponsored projects with major national and international scientific bodies including the World Climate Research Programme (WCRP), the International and U.S. Climate Variability and Predictability (CLIVAR/US CLIVAR) Program, and the U.S. Global Change Research Program (USGCRP). The CVP program sits within NOAA's Climate Program Office (http://cpo.noaa.gov/CVP). The CVP Program currently supports multiple projects in areas that are aimed at improved representation of physical processes in global models. Some of the topics that are currently funded include: i) Improved Understanding of Intraseasonal Tropical Variability - DYNAMO field campaign and post -field projects, and the new climate model improvement teams focused on MJO processes; ii) Climate Process Teams (CPTs, co-funded with NSF) with projects focused on Cloud macrophysical parameterization and its application to aerosol indirect effects, and Internal-Wave Driven Mixing in Global Ocean Models; iii) Improved Understanding of Tropical Pacific Processes, Biases, and Climatology; iv) Understanding Arctic Sea Ice Mechanism and Predictability;v) AMOC Mechanisms and Decadal Predictability Recent results from CVP-funded projects will be summarized. Additional information can be found at http://cpo.noaa.gov/CVP.

The predictive information obtained by testing multiple software versions

NASA Technical Reports Server (NTRS)

Lee, Larry D.

1987-01-01

Multiversion programming is a redundancy approach to developing highly reliable software. In applications of this method, two or more versions of a program are developed independently by different programmers and the versions are combined to form a redundant system. One variation of this approach consists of developing a set of n program versions and testing the versions to predict the failure probability of a particular program or a system formed from a subset of the programs. The precision that might be obtained, and also the effect of programmer variability if predictions are made over repetitions of the process of generating different program versions, are examined.

An analysis for high speed propeller-nacelle aerodynamic performance prediction. Volume 2: User's manual

NASA Technical Reports Server (NTRS)

Egolf, T. Alan; Anderson, Olof L.; Edwards, David E.; Landgrebe, Anton J.

1988-01-01

A user's manual for the computer program developed for the prediction of propeller-nacelle aerodynamic performance reported in, An Analysis for High Speed Propeller-Nacelle Aerodynamic Performance Prediction: Volume 1 -- Theory and Application, is presented. The manual describes the computer program mode of operation requirements, input structure, input data requirements and the program output. In addition, it provides the user with documentation of the internal program structure and the software used in the computer program as it relates to the theory presented in Volume 1. Sample input data setups are provided along with selected printout of the program output for one of the sample setups.

SRB-3D Solid Rocket Booster performance prediction program. Volume 3: Programmer's manual

NASA Technical Reports Server (NTRS)

Winkler, J. C.

1976-01-01

The programmer's manual for the Modified Solid Rocket Booster Performance Prediction Program (SRB-3D) describes the major control routines of SRB-3D, followed by a super index listing of the program and a cross-reference of the program variables.

Genetic Programming as Alternative for Predicting Development Effort of Individual Software Projects

PubMed Central

Chavoya, Arturo; Lopez-Martin, Cuauhtemoc; Andalon-Garcia, Irma R.; Meda-Campaña, M. E.

2012-01-01

Statistical and genetic programming techniques have been used to predict the software development effort of large software projects. In this paper, a genetic programming model was used for predicting the effort required in individually developed projects. Accuracy obtained from a genetic programming model was compared against one generated from the application of a statistical regression model. A sample of 219 projects developed by 71 practitioners was used for generating the two models, whereas another sample of 130 projects developed by 38 practitioners was used for validating them. The models used two kinds of lines of code as well as programming language experience as independent variables. Accuracy results from the model obtained with genetic programming suggest that it could be used to predict the software development effort of individual projects when these projects have been developed in a disciplined manner within a development-controlled environment. PMID:23226305

A computer program for the prediction of near field noise of aircraft in cruising flight: User's guide

NASA Technical Reports Server (NTRS)

Tibbetts, J. G.

1980-01-01

Detailed instructions for using the near field cruise noise prediction program, a program listing, and a sample case with output are presented. The total noise for free field lossless conditions at selected observer locations is obtained by summing the contributions from up to nine acoustic sources. These noise sources, selected at the user's option, include the fan/compressor, turbine, core (combustion), jet, shock, and airframe (trailing edge and turbulent boundary layers). The effects of acoustic suppression materials such as engine inlet treatment may also be included in the noise prediction. The program is available for use on the NASA/Langley Research Center CDC computer. Comparisons of the program predictions with measured data are also given, and some possible reasons for their lack of agreement presented.

Comparison of two computer programs by predicting turbulent mixing of helium in a ducted supersonic airstream

NASA Technical Reports Server (NTRS)

Pan, Y. S.; Drummond, J. P.; Mcclinton, C. R.

1978-01-01

Two parabolic flow computer programs, SHIP (a finite-difference program) and COMOC (a finite-element program), are used for predicting three-dimensional turbulent reacting flow fields in supersonic combustors. The theoretical foundation of the two computer programs are described, and then the programs are applied to a three-dimensional turbulent mixing experiment. The cold (nonreacting) flow experiment was performed to study the mixing of helium jets with a supersonic airstream in a rectangular duct. Surveys of the flow field at an upstream were used as the initial data by programs; surveys at a downstream station provided comparison to assess program accuracy. Both computer programs predicted the experimental results and data trends reasonably well. However, the comparison between the computations from the two programs indicated that SHIP was more accurate in computation and more efficient in both computer storage and computing time than COMOC.

Computer prediction of three-dimensional potential flow fields in which aircraft propellers operate: Computer program description and users manual

NASA Technical Reports Server (NTRS)

Jumper, S. J.

1979-01-01

A method was developed for predicting the potential flow velocity field at the plane of a propeller operating under the influence of a wing-fuselage-cowl or nacelle combination. A computer program was written which predicts the three dimensional potential flow field. The contents of the program, its input data, and its output results are described.

Classification and disease prediction via mathematical programming

NASA Astrophysics Data System (ADS)

Lee, Eva K.; Wu, Tsung-Lin

2007-11-01

In this chapter, we present classification models based on mathematical programming approaches. We first provide an overview on various mathematical programming approaches, including linear programming, mixed integer programming, nonlinear programming and support vector machines. Next, we present our effort of novel optimization-based classification models that are general purpose and suitable for developing predictive rules for large heterogeneous biological and medical data sets. Our predictive model simultaneously incorporates (1) the ability to classify any number of distinct groups; (2) the ability to incorporate heterogeneous types of attributes as input; (3) a high-dimensional data transformation that eliminates noise and errors in biological data; (4) the ability to incorporate constraints to limit the rate of misclassification, and a reserved-judgment region that provides a safeguard against over-training (which tends to lead to high misclassification rates from the resulting predictive rule) and (5) successive multi-stage classification capability to handle data points placed in the reserved judgment region. To illustrate the power and flexibility of the classification model and solution engine, and its multigroup prediction capability, application of the predictive model to a broad class of biological and medical problems is described. Applications include: the differential diagnosis of the type of erythemato-squamous diseases; predicting presence/absence of heart disease; genomic analysis and prediction of aberrant CpG island meythlation in human cancer; discriminant analysis of motility and morphology data in human lung carcinoma; prediction of ultrasonic cell disruption for drug delivery; identification of tumor shape and volume in treatment of sarcoma; multistage discriminant analysis of biomarkers for prediction of early atherosclerois; fingerprinting of native and angiogenic microvascular networks for early diagnosis of diabetes, aging, macular degeneracy and tumor metastasis; prediction of protein localization sites; and pattern recognition of satellite images in classification of soil types. In all these applications, the predictive model yields correct classification rates ranging from 80% to 100%. This provides motivation for pursuing its use as a medical diagnostic, monitoring and decision-making tool.

Characterization of the space shuttle reaction control system engine

NASA Technical Reports Server (NTRS)

Wilson, M. S.; Stechman, R. C.; Edelman, R. B.; Fortune, O. F.; Economos, C.

1972-01-01

A computer program was developed and written in FORTRAN 5 which predicts the transient and steady state performance and heat transfer characteristics of a pulsing GO2/GH2 rocket engine. This program predicts the dynamic flow and ignition characteristics which, when combined in a quasi-steady state manner with the combustion and mixing analysis program, will provide the thrust and specific impulse of the engine as a function of time. The program also predicts the transient and steady state heat transfer characteristics of the engine using various cooling concepts. The computer program, test case, and documentation are presented. The program is applicable to any system capable of utilizing the FORTRAN 4 or FORTRAN 5 language.

Computer program to predict noise of general aviation aircraft: User's guide

NASA Technical Reports Server (NTRS)

Mitchell, J. A.; Barton, C. K.; Kisner, L. S.; Lyon, C. A.

1982-01-01

Program NOISE predicts General Aviation Aircraft far-field noise levels at FAA FAR Part 36 certification conditions. It will also predict near-field and cabin noise levels for turboprop aircraft and static engine component far-field noise levels.

Program Predicts Time Courses of Human/Computer Interactions

NASA Technical Reports Server (NTRS)

Vera, Alonso; Howes, Andrew

2005-01-01

CPM X is a computer program that predicts sequences of, and amounts of time taken by, routine actions performed by a skilled person performing a task. Unlike programs that simulate the interaction of the person with the task environment, CPM X predicts the time course of events as consequences of encoded constraints on human behavior. The constraints determine which cognitive and environmental processes can occur simultaneously and which have sequential dependencies. The input to CPM X comprises (1) a description of a task and strategy in a hierarchical description language and (2) a description of architectural constraints in the form of rules governing interactions of fundamental cognitive, perceptual, and motor operations. The output of CPM X is a Program Evaluation Review Technique (PERT) chart that presents a schedule of predicted cognitive, motor, and perceptual operators interacting with a task environment. The CPM X program allows direct, a priori prediction of skilled user performance on complex human-machine systems, providing a way to assess critical interfaces before they are deployed in mission contexts.

Interior noise prediction methodology: ATDAC theory and validation

NASA Technical Reports Server (NTRS)

Mathur, Gopal P.; Gardner, Bryce K.

1992-01-01

The Acoustical Theory for Design of Aircraft Cabins (ATDAC) is a computer program developed to predict interior noise levels inside aircraft and to evaluate the effects of different aircraft configurations on the aircraft acoustical environment. The primary motivation for development of this program is the special interior noise problems associated with advanced turboprop (ATP) aircraft where there is a tonal, low frequency noise problem. Prediction of interior noise levels requires knowledge of the energy sources, the transmission paths, and the relationship between the energy variable and the sound pressure level. The energy sources include engine noise, both airborne and structure-borne; turbulent boundary layer noise; and interior noise sources such as air conditioner noise and auxiliary power unit noise. Since propeller and engine noise prediction programs are widely available, they are not included in ATDAC. Airborne engine noise from any prediction or measurement may be input to this program. This report describes the theory and equations implemented in the ATDAC program.

Interior noise prediction methodology: ATDAC theory and validation

NASA Astrophysics Data System (ADS)

Mathur, Gopal P.; Gardner, Bryce K.

1992-04-01

The Acoustical Theory for Design of Aircraft Cabins (ATDAC) is a computer program developed to predict interior noise levels inside aircraft and to evaluate the effects of different aircraft configurations on the aircraft acoustical environment. The primary motivation for development of this program is the special interior noise problems associated with advanced turboprop (ATP) aircraft where there is a tonal, low frequency noise problem. Prediction of interior noise levels requires knowledge of the energy sources, the transmission paths, and the relationship between the energy variable and the sound pressure level. The energy sources include engine noise, both airborne and structure-borne; turbulent boundary layer noise; and interior noise sources such as air conditioner noise and auxiliary power unit noise. Since propeller and engine noise prediction programs are widely available, they are not included in ATDAC. Airborne engine noise from any prediction or measurement may be input to this program. This report describes the theory and equations implemented in the ATDAC program.

COSIM: A Finite-Difference Computer Model to Predict Ternary Concentration Profiles Associated with Oxidation and Interdiffusion of Overlay-Coated Substrates

NASA Technical Reports Server (NTRS)

Nesbitt, James A.

2000-01-01

A finite-difference computer program (COSIM) has been written which models the one-dimensional, diffusional transport associated with high-temperature oxidation and interdiffusion of overlay-coated substrates. The program predicts concentration profiles for up to three elements in the coating and substrate after various oxidation exposures. Surface recession due to solute loss is also predicted. Ternary cross terms and concentration-dependent diffusion coefficients are taken into account. The program also incorporates a previously-developed oxide growth and spalling model to simulate either isothermal or cyclic oxidation exposures. In addition to predicting concentration profiles after various oxidation exposures, the program can also be used to predict coating fife based on a concentration dependent failure criterion (e.g., surface solute content drops to two percent). The computer code, written in an extension of FORTRAN 77, employs numerous subroutines to make the program flexible and easily modifiable to other coating oxidation problems.

Status and plans for the ANOPP/HSR prediction system

NASA Technical Reports Server (NTRS)

Nolan, Sandra K.

1992-01-01

ANOPP is a comprehensive prediction system which was developed and validated by NASA. Because ANOPP is a system prediction program, it allows aerospace industry researchers to create trade-off studies with a variety of aircraft noise problems. The extensive validation of ANOPP allows the program results to be used as a benchmark for testing other prediction codes.

Helicopter main-rotor speed effects: A comparison of predicted ranges of detection from the aural detection program ICHIN and the electronic detection program ARCAS

NASA Technical Reports Server (NTRS)

Mueller, Arnold W.; Smith, Charles D.

1991-01-01

NASA LaRC personnel have conducted a strudy of the predicted acoustic detection ranges associated with reduced helicopter main rotor speeds. This was accomplished by providing identical input information to both the aural detection program ICHIN 6, (I Can Hear It Now, version 6) and the electronic acoustic detection program ARCAS (Assessment of Rotorcraft Detection by Acoustics Sensing). In this study, it was concluded that reducing the main rotor speed of the helicopter by 27 percent reduced both the predicted aural and electronic detection ranges by approximately 50 percent. Additionally, ARCAS was observed to function better with narrowband spectral input than with one-third octave band spectral inputs and the predicted electronic range of acoustic detection is greater than the predicted aural detection range.

Spherical roller bearing analysis. SKF computer program SPHERBEAN. Volume 3: Program correlation with full scale hardware tests

NASA Technical Reports Server (NTRS)

Kleckner, R. J.; Rosenlieb, J. W.; Dyba, G.

1980-01-01

The results of a series of full scale hardware tests comparing predictions of the SPHERBEAN computer program with measured data are presented. The SPHERBEAN program predicts the thermomechanical performance characteristics of high speed lubricated double row spherical roller bearings. The degree of correlation between performance predicted by SPHERBEAN and measured data is demonstrated. Experimental and calculated performance data is compared over a range in speed up to 19,400 rpm (0.8 MDN) under pure radial, pure axial, and combined loads.

FrameD: A flexible program for quality check and gene prediction in prokaryotic genomes and noisy matured eukaryotic sequences.

PubMed

Schiex, Thomas; Gouzy, Jérôme; Moisan, Annick; de Oliveira, Yannick

2003-07-01

We describe FrameD, a program that predicts coding regions in prokaryotic and matured eukaryotic sequences. Initially targeted at gene prediction in bacterial GC rich genomes, the gene model used in FrameD also allows to predict genes in the presence of frameshifts and partially undetermined sequences which makes it also very suitable for gene prediction and frameshift correction in unfinished sequences such as EST and EST cluster sequences. Like recent eukaryotic gene prediction programs, FrameD also includes the ability to take into account protein similarity information both in its prediction and its graphical output. Its performances are evaluated on different bacterial genomes. The web site (http://genopole.toulouse.inra.fr/bioinfo/FrameD/FD) allows direct prediction, sequence correction and translation and the ability to learn new models for new organisms.

Documentation of the Benson Diesel Engine Simulation Program

NASA Technical Reports Server (NTRS)

Vangerpen, Jon

1988-01-01

This report documents the Benson Diesel Engine Simulation Program and explains how it can be used to predict the performance of diesel engines. The program was obtained from the Garrett Turbine Engine Company but has been extensively modified since. The program is a thermodynamic simulation of the diesel engine cycle which uses a single zone combustion model. It can be used to predict the effect of changes in engine design and operating parameters such as valve timing, speed and boost pressure. The most significan change made to this program is the addition of a more detailed heat transfer model to predict metal part temperatures. This report contains a description of the sub-models used in the Benson program, a description of the input parameters and sample program runs.

Student Use of Physics to Make Sense of Incomplete but Functional VPython Programs in a Lab Setting

NASA Astrophysics Data System (ADS)

Weatherford, Shawn A.

2011-12-01

Computational activities in Matter & Interactions, an introductory calculus-based physics course, have the instructional goal of providing students with the experience of applying the same set of a small number of fundamental principles to model a wide range of physical systems. However there are significant instructional challenges for students to build computer programs under limited time constraints, especially for students who are unfamiliar with programming languages and concepts. Prior attempts at designing effective computational activities were successful at having students ultimately build working VPython programs under the tutelage of experienced teaching assistants in a studio lab setting. A pilot study revealed that students who completed these computational activities had significant difficultly repeating the exact same tasks and further, had difficulty predicting the animation that would be produced by the example program after interpreting the program code. This study explores the interpretation and prediction tasks as part of an instructional sequence where students are asked to read and comprehend a functional, but incomplete program. Rather than asking students to begin their computational tasks with modifying program code, we explicitly ask students to interpret an existing program that is missing key lines of code. The missing lines of code correspond to the algebraic form of fundamental physics principles or the calculation of forces which would exist between analogous physical objects in the natural world. Students are then asked to draw a prediction of what they would see in the simulation produced by the VPython program and ultimately run the program to evaluate the students' prediction. This study specifically looks at how the participants use physics while interpreting the program code and creating a whiteboard prediction. This study also examines how students evaluate their understanding of the program and modification goals at the beginning of the modification task. While working in groups over the course of a semester, study participants were recorded while they completed three activities using these incomplete programs. Analysis of the video data showed that study participants had little difficulty interpreting physics quantities, generating a prediction, or determining how to modify the incomplete program. Participants did not base their prediction solely from the information from the incomplete program. When participants tried to predict the motion of the objects in the simulation, many turned to their knowledge of how the system would evolve if it represented an analogous real-world physical system. For example, participants attributed the real-world behavior of springs to helix objects even though the program did not include calculations for the spring to exert a force when stretched. Participants rarely interpreted lines of code in the computational loop during the first computational activity, but this changed during latter computational activities with most participants using their physics knowledge to interpret the computational loop. Computational activities in the Matter & Interactions curriculum were revised in light of these findings to include an instructional sequence of tasks to build a comprehension of the example program. The modified activities also ask students to create an additional whiteboard prediction for the time-evolution of the real-world phenomena which the example program will eventually model. This thesis shows how comprehension tasks identified by Palinscar and Brown (1984) as effective in improving reading comprehension are also effective in helping students apply their physics knowledge to interpret a computer program which attempts to model a real-world phenomena and identify errors in their understanding of the use, or omission, of fundamental physics principles in a computational model.

Predicting the payload capability of cable logging systems including the effect of partial suspension

Treesearch

Gary D. Falk

1981-01-01

A systematic procedure for predicting the payload capability of running, live, and standing skylines is presented. Three hand-held calculator programs are used to predict payload capability that includes the effect of partial suspension. The programs allow for predictions for downhill yarding and for yarding away from the yarder. The equations and basic principles...

Evaluation and comparison of the ability of online available prediction programs to predict true linear B-cell epitopes.

PubMed

Costa, Juan G; Faccendini, Pablo L; Sferco, Silvano J; Lagier, Claudia M; Marcipar, Iván S

2013-06-01

This work deals with the use of predictors to identify useful B-cell linear epitopes to develop immunoassays. Experimental techniques to meet this goal are quite expensive and time consuming. Therefore, we tested 5 free, online prediction methods (AAPPred, ABCpred, BcePred, BepiPred and Antigenic) widely used for predicting linear epitopes, using the primary structure of the protein as the only input. We chose a set of 65 experimentally well documented epitopes obtained by the most reliable experimental techniques as our true positive set. To compare the quality of the predictor methods we used their positive predictive value (PPV), i.e. the proportion of the predicted epitopes that are true, experimentally confirmed epitopes, in relation to all the epitopes predicted. We conclude that AAPPred and ABCpred yield the best results as compared with the other programs and with a random prediction procedure. Our results also indicate that considering the consensual epitopes predicted by several programs does not improve the PPV.

Predictions of Performance in Career Education.

ERIC Educational Resources Information Center

Novick, M. R.; And Others

Prediction weights for educational programs in 22 vocational and technical fields are provided using ability scores from the American College Testing Program (ACT) Career Planning Profile and a Bayesian regression theory. The criterion variable studies was first-semester grade-point average. Each vocational-technical program analyzed was…

Verification of MICNOISE computer program for the prediction of highway noise

DOT National Transportation Integrated Search

1974-01-01

The objectives of this study were to verify the computer program used by the Virginia Department of Highways to predict highway sound pressure levels, to determine whether the accuracy and usefulness of the program could be improved, and to make reco...

Reverse-engineering the genetic circuitry of a cancer cell with predicted intervention in chronic lymphocytic leukemia.

PubMed

Vallat, Laurent; Kemper, Corey A; Jung, Nicolas; Maumy-Bertrand, Myriam; Bertrand, Frédéric; Meyer, Nicolas; Pocheville, Arnaud; Fisher, John W; Gribben, John G; Bahram, Seiamak

2013-01-08

Cellular behavior is sustained by genetic programs that are progressively disrupted in pathological conditions--notably, cancer. High-throughput gene expression profiling has been used to infer statistical models describing these cellular programs, and development is now needed to guide orientated modulation of these systems. Here we develop a regression-based model to reverse-engineer a temporal genetic program, based on relevant patterns of gene expression after cell stimulation. This method integrates the temporal dimension of biological rewiring of genetic programs and enables the prediction of the effect of targeted gene disruption at the system level. We tested the performance accuracy of this model on synthetic data before reverse-engineering the response of primary cancer cells to a proliferative (protumorigenic) stimulation in a multistate leukemia biological model (i.e., chronic lymphocytic leukemia). To validate the ability of our method to predict the effects of gene modulation on the global program, we performed an intervention experiment on a targeted gene. Comparison of the predicted and observed gene expression changes demonstrates the possibility of predicting the effects of a perturbation in a gene regulatory network, a first step toward an orientated intervention in a cancer cell genetic program.

Use of a pretest strategy for physical therapist assistant programs to predict success rate on the national physical therapy exam.

PubMed

Sloas, Stacey B; Keith, Becky; Whitehead, Malcolm T

2013-01-01

This study investigated a pretest strategy that identified physical therapist assistant (PTA) students who were at risk of failure on the National Physical Therapy Examination (NPTE). Program assessment data from five cohorts of PTA students (2005-2009) were used to develop a stepwise multiple regression formula that predicted first-time NPTE licensure scores. Data used included the Nelson-Denny Reading Test, grades from eight core courses, grade point average upon admission to the program, and scores from three mock NPTE exams given during the program. Pearson correlation coefficients were calculated between each of the 15 variables and NPTE scores. Stepwise multiple regression analysis was performed using data collected at the ends of the first, second, and third (final) semesters of the program. Data from the class of 2010 were then used to validate the formula. The end-of-program formula accounted for the greatest variance (57%) in predicted scores. Those students scoring below a predicted scaled score of 620 were identified to be at risk of failure of the licensure exam. These students were counseled, and a remedial plan was developed based on regression predictions prior to them sitting for the licensure exam.

BIOPEP database and other programs for processing bioactive peptide sequences.

PubMed

Minkiewicz, Piotr; Dziuba, Jerzy; Iwaniak, Anna; Dziuba, Marta; Darewicz, Małgorzata

2008-01-01

This review presents the potential for application of computational tools in peptide science based on a sample BIOPEP database and program as well as other programs and databases available via the World Wide Web. The BIOPEP application contains a database of biologically active peptide sequences and a program enabling construction of profiles of the potential biological activity of protein fragments, calculation of quantitative descriptors as measures of the value of proteins as potential precursors of bioactive peptides, and prediction of bonds susceptible to hydrolysis by endopeptidases in a protein chain. Other bioactive and allergenic peptide sequence databases are also presented. Programs enabling the construction of binary and multiple alignments between peptide sequences, the construction of sequence motifs attributed to a given type of bioactivity, searching for potential precursors of bioactive peptides, and the prediction of sites susceptible to proteolytic cleavage in protein chains are available via the Internet as are other approaches concerning secondary structure prediction and calculation of physicochemical features based on amino acid sequence. Programs for prediction of allergenic and toxic properties have also been developed. This review explores the possibilities of cooperation between various programs.

Rocket exhaust effluent modeling for tropospheric air quality and environmental assessments

NASA Technical Reports Server (NTRS)

Stephens, J. B.; Stewart, R. B.

1977-01-01

The various techniques for diffusion predictions to support air quality predictions and environmental assessments for aerospace applications are discussed in terms of limitations imposed by atmospheric data. This affords an introduction to the rationale behind the selection of the National Aeronautics and Space Administration (NASA)/Marshall Space Flight Center (MSFC) Rocket Exhaust Effluent Diffusion (REED) program. The models utilized in the NASA/MSFC REED program are explained. This program is then evaluated in terms of some results from a joint MSFC/Langley Research Center/Kennedy Space Center Titan Exhaust Effluent Prediction and Monitoring Program.

Longitudinal Aerodynamic Modeling of the Adaptive Compliant Trailing Edge Flaps on a GIII Airplane and Comparisons to Flight Data

NASA Technical Reports Server (NTRS)

Smith, Mark S.; Bui, Trong T.; Garcia, Christian A.; Cumming, Stephen B.

2016-01-01

A pair of compliant trailing edge flaps was flown on a modified GIII airplane. Prior to flight test, multiple analysis tools of various levels of complexity were used to predict the aerodynamic effects of the flaps. Vortex lattice, full potential flow, and full Navier-Stokes aerodynamic analysis software programs were used for prediction, in addition to another program that used empirical data. After the flight-test series, lift and pitching moment coefficient increments due to the flaps were estimated from flight data and compared to the results of the predictive tools. The predicted lift increments matched flight data well for all predictive tools for small flap deflections. All tools over-predicted lift increments for large flap deflections. The potential flow and Navier-Stokes programs predicted pitching moment coefficient increments better than the other tools.

Factors leading to different viability predictions for a grizzly bear data set

USGS Publications Warehouse

Mills, L.S.; Hayes, S.G.; Wisdom, M.J.; Citta, J.; Mattson, D.J.; Murphy, K.

1996-01-01

Population viability analysis programs are being used increasingly in research and management applications, but there has not been a systematic study of the congruence of different program predictions based on a single data set. We performed such an analysis using four population viability analysis computer programs: GAPPS, INMAT, RAMAS/AGE, and VORTEX. The standardized demographic rates used in all programs were generalized from hypothetical increasing and decreasing grizzly bear (Ursus arctos horribilis) populations. Idiosyncracies of input format for each program led to minor differences in intrinsic growth rates that translated into striking differences in estimates of extinction rates and expected population size. In contrast, the addition of demographic stochasticity, environmental stochasticity, and inbreeding costs caused only a small divergence in viability predictions. But, the addition of density dependence caused large deviations between the programs despite our best attempts to use the same density-dependent functions. Population viability programs differ in how density dependence is incorporated, and the necessary functions are difficult to parameterize accurately. Thus, we recommend that unless data clearly suggest a particular density-dependent model, predictions based on population viability analysis should include at least one scenario without density dependence. Further, we describe output metrics that may differ between programs; development of future software could benefit from standardized input and output formats across different programs.

Astronomy in Primary and Secondary Education in Slovenia

NASA Astrophysics Data System (ADS)

Gomboc, Andreja

2015-08-01

I will present the status of astronomy in educational system in Slovenia. In primary schools astronomy is offered as an optional course in the last 3 grades (12-15 yrs old), while in secondary schools a few astronomical topics are present only as part of other subjects (e.g. physics, geography). I will describe a pilot project of an astronomy course in secondary schools, which was carried out in the school year 2013/14. The main focus of my presentation will be the experience gained with organisation of the Slovenian National Astronomy Competition. It is organised by the Slovenian Society of Mathematicians, Physicists and Astronomers since 2009, building on an extensive network of over 200 primary and secondary school teachers who participated in IYA2009 activities, and who now represent majority of mentors for the competition. In 2013, only 5 years after the start of competition, our pupils attended the International Olympiad on Astronomy and Astrophysics for the first time and with great success. Supporting activities include the Slovenian version of the Portal to the Universe (www.portalvvesolje.si) and translation of Space Scoop astronomy news for children.

[Billroth and Brahms: personal encounter of medicine and music].

PubMed

Hadaschik, B A; Hadaschik, E N; Hohenfellner, M

2012-02-01

Theodor Billroth and Johannes Brahms shared a decades long personal friendship. The music-loving Billroth influenced the work of the famous composer and in turn Brahms also left traces within Billroth's lifetime achievements. To shed light on the close relationship of medicine and music, this manuscript describes both Billroth's life and surgical career as they were influenced and stimulated by his close friendship to Brahms.Theodor Billroth and Johannes Brahms first met in 1865 in Zurich, Switzerland. After Billroth accepted the chair of surgery at the University of Vienna in 1867, Brahms moved to Vienna in 1869. During the following years, Billroth analyzed most of Brahms' compositions prior to publication. Similar to his effective way of teaching medical students and assistants, Billroth stimulated Brahms to publish many of his later compositions. Brahms on the other hand supported Billroth in writing his essay"Who is musical?". Furthermore, music helped Billroth to cope with the demanding working life of a surgeon.Music and surgery share both structural and emotional analogies. While both professions require meticulous techniques, personal interaction is a prerequisite for success. "Science and art scoop from the same well."

Microscopic Comparison of Airfall Dust to Martian Soil

NASA Technical Reports Server (NTRS)

2008-01-01

This pair of images taken by the Optical Microscope on NASA's Phoenix Mars Lander offers a side-by-side comparison of an airfall dust sample collected on a substrate exposed during landing (left) and a soil sample scooped up from the surface of the ground beside the lander. In both cases the sample is collected on a silicone substrate, which provides a sticky surface holding sample particles for observation by the microscope.

Similar fine particles at the resolution limit of the microscope are seen in both samples, indicating that the soil has formed from settling of dust.

The microscope took the image on the left during Phoenix's Sol 9 (June 3, 2008), or the ninth Martian day after landing. It took the image on the right during Sol 17 (June 11, 2008).

The scale bar is 1 millimeter (0.04 inch).

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

Development of a material processing plant for lunar soil

NASA Technical Reports Server (NTRS)

Goettsch, Ulix; Ousterhout, Karl

1992-01-01

Currently there is considerable interest in developing in-situ materials processing plants for both the Moon and Mars. Two of the most important aspects of developing such a materials processing plant is the overall system design and the integration of the different technologies into a reliable, lightweight, and cost-effective unit. The concept of an autonomous materials processing plant that is capable of producing useful substances from lunar regolith was developed. In order for such a materials processing plant to be considered as a viable option, it must be totally self-contained, able to operate autonomously, cost effective, light weight, and fault tolerant. In order to assess the impact of different technologies on the overall systems design and integration, a one-half scale model was constructed that is capable of scooping up (or digging) lunar soil, transferring the soil to a solar furnace, heating the soil in the furnace to liberate the gasses, and transferring the spent soil to a 'tile' processing center. All aspects of the control system are handled by a 386 class PC via D/A, A/D, and DSP (Digital Signal Processor) control cards.

Bacteria Associated with Copestylum (Diptera, Syrphidae) Larvae and Their Cactus Host Isolatocereus dumortieri

PubMed Central

Martínez-Falcón, Ana Paola; Durbán, Ana; Latorre, Amparo; Antón, Josefa; Marcos-García, María de los Ángeles

2011-01-01

We describe the gut bacterial diversity inhabiting two saprophagous syrphids and their breeding substrate (decayed tissues of the columnar cactus Isolatocereus dumortieri). We analyzed the gut microbiota of Copestylum latum (scooping larvae that feed on decayed cactus tissues) and Copestylum limbipenne (whose larvae can also feed on semiliquid tissues) using molecular techniques. DNA was extracted from larval guts and cactus tissues. The V1-V3 region of the 16S rRNA genes was amplified and sequenced. A total of 31079 sequences were obtained. The main findings are: C. limbipenne is dominated by several Enterobacteriaceae, including putative nitrogen-fixing genera and pectinolitic species and some denitrifying species, whereas in C. latum unclassified Gammaproteobacteria predominate. Decayed tissues have a dominant lactic acid bacterial community. The bacterial communities were more similar between larval species than between each larva and its breeding substrate. The results suggest that the gut bacterial community in these insects is not strongly affected by diet and must be dependent on other factors, such as vertical transmission, evolutionary history and host innate immunity. PMID:22132101

The effects of information on willingness to pay for animal welfare in dairy production: application of nonhypothetical valuation mechanisms.

PubMed

Elbakidze, L; Nayga, R M

2012-03-01

The objective of this study was to examine consumer willingness to pay (WTP) for animal welfare in dairy production using nonhypothetical Vickrey auctions and open-ended choice experiments. Two hundred fifteen subjects participated in experimental sessions with 4 types of dairy products (humane animal care-labeled cheese and ice cream and conventional cheese and ice cream) and 4 valuation mechanisms. Information treatment, which included information about humane animal care principles in dairy production, was used to examine the effects of information on WTP. The results showed that participants, on average, were willing to pay extra for a scoop of humane animal care-labeled ice cream above the price of conventional ice cream. However, no premium WTP for humane animal care-labeled cheese was detected. Furthermore, provision of information only about humane animal care principles in dairy production, without corresponding information about conventional production practices, did not increase WTP for humane animal care-labeled products. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Ocean wave electric generators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenberg, H.R.

This patent describes an apparatus for generating electricity from ocean waves. It consists of: 1.) a hollow buoyant duck positioned in the path of waves including a core about the center axis of which the duck rotates, a lower chamber portion having liquid therein and an upper chamber portion having air therein. The air is alternately compressed and expanded by the liquid in the chamber during the rotational motion of the duck caused by waves. A turbine mounted in the upper portion of the duck is driven by the compressed and expanded air. A generator is coupled to the turbinemore » and operated to produce electrical energy and an air bulb; 2.) a spine having a transverse axial shaft anchoring the spine to the ocean floor. The upper portion of the spine engages the duck to maintain the duck in position. The spine has a curved configuration to concentrate and direct wave energy. The spine configuration acts as a scoop to increase the height of wave peaks and as a foil to increase the depth of wave troughs.« less

Individual Factors Predicting Mental Health Court Diversion Outcome

ERIC Educational Resources Information Center

Verhaaff, Ashley; Scott, Hannah

2015-01-01

Objective: This study examined which individual factors predict mental health court diversion outcome among a sample of persons with mental illness participating in a postcharge diversion program. Method: The study employed secondary analysis of existing program records for 419 persons with mental illness in a court diversion program. Results:…

The Coastal Ocean Prediction Systems program: Understanding and managing our coastal ocean

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eden, H.F.; Mooers, C.N.K.

1990-06-01

The goal of COPS is to couple a program of regular observations to numerical models, through techniques of data assimilation, in order to provide a predictive capability for the US coastal ocean including the Great Lakes, estuaries, and the entire Exclusive Economic Zone (EEZ). The objectives of the program include: determining the predictability of the coastal ocean and the processes that govern the predictability; developing efficient prediction systems for the coastal ocean based on the assimilation of real-time observations into numerical models; and coupling the predictive systems for the physical behavior of the coastal ocean to predictive systems for biological,more » chemical, and geological processes to achieve an interdisciplinary capability. COPS will provide the basis for effective monitoring and prediction of coastal ocean conditions by optimizing the use of increased scientific understanding, improved observations, advanced computer models, and computer graphics to make the best possible estimates of sea level, currents, temperatures, salinities, and other properties of entire coastal regions.« less

MLITemp: A computer program to predict the thermal effects associated with hypervelocity impact damage to space station MLI

NASA Technical Reports Server (NTRS)

Rule, W. K.; Giridharan, V.

1991-01-01

A family of user-friendly, DOS PC based, Microsoft BASIC programs written to provide spacecraft designers with empirical predictions of space debris damage to orbiting spacecraft are described. Spacecraft wall temperatures and condensate formation is also predicted. The spacecraft wall configuration is assumed to consist of multilayered insulation (MLI) placed between a Whipple style bumper and the pressure wall. Impact damage predictions are based on data sets of experimental results obtained from simulating debris impacts on spacecraft using light gas guns on earth. A module of the program facilitates the creation of the database of experimental results that is used by the damage prediction modules to predict damage to the bumper, the MLI, and the pressure wall. A finite difference technique is used to predict temperature distributions in the pressure wall, the MLI, and the bumper. Condensate layer thickness is predicted for the case where the pressure wall temperature drops below the dew point temperature of the spacecraft atmosphere.

Abstracts of Presentations at Workshop on Unsteady and Two-Phase-Flows, Held in London, England on June 28-29, 1990

DTIC Science & Technology

1990-06-29

has been found to be a modification of the STAN’ program from Crawford and Kays2. An important characteristic of any boundary layer prediction program...function of freestream turbulence intensity, helped in predicting heat transfer rates between the hot gases and the b’arie surface. a Professor...be a modulator of transition to turbulence and the boundary layer prediction programs currently available have a poor performance in such flows

Using the brain's fight-or-flight response for predicting mental illness on the human space flight program

NASA Astrophysics Data System (ADS)

Losik, L.

A predictive medicine program allows disease and illness including mental illness to be predicted using tools created to identify the presence of accelerated aging (a.k.a. disease) in electrical and mechanical equipment. When illness and disease can be predicted, actions can be taken so that the illness and disease can be prevented and eliminated. A predictive medicine program uses the same tools and practices from a prognostic and health management program to process biological and engineering diagnostic data provided in analog telemetry during prelaunch readiness and space exploration missions. The biological and engineering diagnostic data necessary to predict illness and disease is collected from the pre-launch spaceflight readiness activities and during space flight for the ground crew to perform a prognostic analysis on the results from a diagnostic analysis. The diagnostic, biological data provided in telemetry is converted to prognostic (predictive) data using the predictive algorithms. Predictive algorithms demodulate telemetry behavior. They illustrate the presence of accelerated aging/disease in normal appearing systems that function normally. Mental illness can predicted using biological diagnostic measurements provided in CCSDS telemetry from a spacecraft such as the ISS or from a manned spacecraft in deep space. The measurements used to predict mental illness include biological and engineering data from an astronaut's circadian and ultranian rhythms. This data originates deep in the brain that is also damaged from the long-term exposure to cortisol and adrenaline anytime the body's fight or flight response is activated. This paper defines the brain's FOFR; the diagnostic, biological and engineering measurements needed to predict mental illness, identifies the predictive algorithms necessary to process the behavior in CCSDS analog telemetry to predict and thus prevent mental illness from occurring on human spaceflight missions.

Validation and Use of a Predictive Modeling Tool: Employing Scientific Findings to Improve Responsible Conduct of Research Education.

PubMed

Mulhearn, Tyler J; Watts, Logan L; Todd, E Michelle; Medeiros, Kelsey E; Connelly, Shane; Mumford, Michael D

2017-01-01

Although recent evidence suggests ethics education can be effective, the nature of specific training programs, and their effectiveness, varies considerably. Building on a recent path modeling effort, the present study developed and validated a predictive modeling tool for responsible conduct of research education. The predictive modeling tool allows users to enter ratings in relation to a given ethics training program and receive instantaneous evaluative information for course refinement. Validation work suggests the tool's predicted outcomes correlate strongly (r = 0.46) with objective course outcomes. Implications for training program development and refinement are discussed.

Prediction of Combustion Gas Deposit Compositions

NASA Technical Reports Server (NTRS)

Kohl, F. J.; Mcbride, B. J.; Zeleznik, F. J.; Gordon, S.

1985-01-01

Demonstrated procedure used to predict accurately chemical compositions of complicated deposit mixtures. NASA Lewis Research Center's Computer Program for Calculation of Complex Chemical Equilibrium Compositions (CEC) used in conjunction with Computer Program for Calculation of Ideal Gas Thermodynamic Data (PAC) and resulting Thermodynamic Data Base (THDATA) to predict deposit compositions from metal or mineral-seeded combustion processes.

[A prediction model for internet game addiction in adolescents: using a decision tree analysis].

PubMed

Kim, Ki Sook; Kim, Kyung Hee

2010-06-01

This study was designed to build a theoretical frame to provide practical help to prevent and manage adolescent internet game addiction by developing a prediction model through a comprehensive analysis of related factors. The participants were 1,318 students studying in elementary, middle, and high schools in Seoul and Gyeonggi Province, Korea. Collected data were analyzed using the SPSS program. Decision Tree Analysis using the Clementine program was applied to build an optimum and significant prediction model to predict internet game addiction related to various factors, especially parent related factors. From the data analyses, the prediction model for factors related to internet game addiction presented with 5 pathways. Causative factors included gender, type of school, siblings, economic status, religion, time spent alone, gaming place, payment to Internet café, frequency, duration, parent's ability to use internet, occupation (mother), trust (father), expectations regarding adolescent's study (mother), supervising (both parents), rearing attitude (both parents). The results suggest preventive and managerial nursing programs for specific groups by path. Use of this predictive model can expand the role of school nurses, not only in counseling addicted adolescents but also, in developing and carrying out programs with parents and approaching adolescents individually through databases and computer programming.

Genome-wide prediction of vaccine targets for human herpes simplex viruses using Vaxign reverse vaccinology

PubMed Central

2013-01-01

Herpes simplex virus (HSV) types 1 and 2 (HSV-1 and HSV-2) are the most common infectious agents of humans. No safe and effective HSV vaccines have been licensed. Reverse vaccinology is an emerging and revolutionary vaccine development strategy that starts with the prediction of vaccine targets by informatics analysis of genome sequences. Vaxign (http://www.violinet.org/vaxign) is the first web-based vaccine design program based on reverse vaccinology. In this study, we used Vaxign to analyze 52 herpesvirus genomes, including 3 HSV-1 genomes, one HSV-2 genome, 8 other human herpesvirus genomes, and 40 non-human herpesvirus genomes. The HSV-1 strain 17 genome that contains 77 proteins was used as the seed genome. These 77 proteins are conserved in two other HSV-1 strains (strain F and strain H129). Two envelope glycoproteins gJ and gG do not have orthologs in HSV-2 or 8 other human herpesviruses. Seven HSV-1 proteins (including gJ and gG) do not have orthologs in all 40 non-human herpesviruses. Nineteen proteins are conserved in all human herpesviruses, including capsid scaffold protein UL26.5 (NP_044628.1). As the only HSV-1 protein predicted to be an adhesin, UL26.5 is a promising vaccine target. The MHC Class I and II epitopes were predicted by the Vaxign Vaxitop prediction program and IEDB prediction programs recently installed and incorporated in Vaxign. Our comparative analysis found that the two programs identified largely the same top epitopes but also some positive results predicted from one program might not be positive from another program. Overall, our Vaxign computational prediction provides many promising candidates for rational HSV vaccine development. The method is generic and can also be used to predict other viral vaccine targets. PMID:23514126

Methodology for Software Reliability Prediction. Volume 2.

DTIC Science & Technology

1987-11-01

The overall acquisition ,z program shall include the resources, schedule, management, structure , and controls necessary to ensure that specified AD...Independent Verification/Validation - Programming Team Structure - Educational Level of Team Members - Experience Level of Team Members * Methods Used...Prediction or Estimation Parameter Supported: Software - Characteristics 3. Objectives: Structured programming studies and Government Ur.’.. procurement

Performance predictions for an SSME configuration with an enlarged throat

NASA Technical Reports Server (NTRS)

Nickerson, G. R.; Dang, L. D.

1985-01-01

The Two Dimensional Kinetics (TDK) computer program that was recently developed for NASA was used to predict the performance of a Large Throat Configuration of the Space Shuttle Main Engine (SSME). Calculations indicate that the current design SSME contains a shock wave that is induced by the nozzle wall shape. In the Large Throat design an even stronger shock wave is predicted. Because of the presence of this shock wave, earlier performance predictions that have neglected shock wave effects have been questioned. The JANNAF thrust chamber performance prediction procedures given in a reference were applied. The analysis includes the effects of two dimensional reacting flow with a shock wave. The effects of the boundary layer with a regenatively cooled wall are also included. A Purdue computer program was used to compute axially symmetric supersonic nozzle flows with an induced shock, but is restricted to flows with a constant ratio of specific heats. Thus, the TDK program was also run with ths assumption and the results of the two programs were compared.

An experimental and theoretical investigation of deposition patterns from an agricultural airplane

NASA Technical Reports Server (NTRS)

Morris, D. J.; Croom, C. C.; Vandam, C. P.; Holmes, B. J.

1984-01-01

A flight test program has been conducted with a representative agricultural airplane to provide data for validating a computer program model which predicts aerially applied particle deposition. Test procedures and the data from this test are presented and discussed. The computer program features are summarized, and comparisons of predicted and measured particle deposition are presented. Applications of the computer program for spray pattern improvement are illustrated.

NOAA Climate Program Office Contributions to National ESPC

NASA Astrophysics Data System (ADS)

Higgins, W.; Huang, J.; Mariotti, A.; Archambault, H. M.; Barrie, D.; Lucas, S. E.; Mathis, J. T.; Legler, D. M.; Pulwarty, R. S.; Nierenberg, C.; Jones, H.; Cortinas, J. V., Jr.; Carman, J.

2016-12-01

NOAA is one of five federal agencies (DOD, DOE, NASA, NOAA, and NSF) which signed an updated charter in 2016 to partner on the National Earth System Prediction Capability (ESPC). Situated within NOAA's Office of Oceanic and Atmospheric Research (OAR), NOAA Climate Program Office (CPO) programs contribute significantly to the National ESPC goals and activities. This presentation will provide an overview of CPO contributions to National ESPC. First, we will discuss selected CPO research and transition activities that directly benefit the ESPC coupled model prediction capability, including The North American Multi-Model Ensemble (NMME) seasonal prediction system The Subseasonal Experiment (SubX) project to test real-time subseasonal ensemble prediction systems. Improvements to the NOAA operational Climate Forecast System (CFS), including software infrastructure and data assimilation. Next, we will show how CPO's foundational research activities are advancing future ESPC capabilities. Highlights will include: The Tropical Pacific Observing System (TPOS) to provide the basis for predicting climate on subseasonal to decadal timescales. Subseasonal-to-Seasonal (S2S) processes and predictability studies to improve understanding, modeling and prediction of the MJO. An Arctic Research Program to address urgent needs for advancing monitoring and prediction capabilities in this major area of concern. Advances towards building an experimental multi-decadal prediction system through studies on the Atlantic Meridional Overturning Circulation (AMOC). Finally, CPO has embraced Integrated Information Systems (IIS's) that build on the innovation of programs such as the National Integrated Drought Information System (NIDIS) to develop and deliver end to end environmental information for key societal challenges (e.g. extreme heat; coastal flooding). These contributions will help the National ESPC better understand and address societal needs and decision support requirements.

An object programming based environment for protein secondary structure prediction.

PubMed

Giacomini, M; Ruggiero, C; Sacile, R

1996-01-01

The most frequently used methods for protein secondary structure prediction are empirical statistical methods and rule based methods. A consensus system based on object-oriented programming is presented, which integrates the two approaches with the aim of improving the prediction quality. This system uses an object-oriented knowledge representation based on the concepts of conformation, residue and protein, where the conformation class is the basis, the residue class derives from it and the protein class derives from the residue class. The system has been tested with satisfactory results on several proteins of the Brookhaven Protein Data Bank. Its results have been compared with the results of the most widely used prediction methods, and they show a higher prediction capability and greater stability. Moreover, the system itself provides an index of the reliability of its current prediction. This system can also be regarded as a basis structure for programs of this kind.

Predicting Workplace Transfer of Learning: A Study of Adult Learners Enrolled in a Continuing Professional Education Training Program

ERIC Educational Resources Information Center

Nafukho, Fredrick Muyia; Alfred, Mary; Chakraborty, Misha; Johnson, Michelle; Cherrstrom, Catherine A.

2017-01-01

Purpose: The primary purpose of this study was to predict transfer of learning to workplace among adult learners enrolled in a continuing professional education (CPE) training program, specifically training courses offered through face-to-face, blended and online instruction formats. The study examined the predictive capacity of trainee…

Using Admission Assessments to Predict Final Grades in a College Music Program

ERIC Educational Resources Information Center

Lehmann, Andreas C.

2014-01-01

Entrance examinations and auditions are common admission procedures for college music programs, yet few researchers have attempted to look at the long-term predictive validity of such selection processes. In this study, archival data from 93 student records of a German music academy were used to predict development of musicianship skills over the…

The Predictive Accuracy of Verbal, Quantitative, and Nonverbal Reasoning Tests: Consequences for Talent Identification and Program Diversity

ERIC Educational Resources Information Center

Lakin, Joni M.; Lohman, David F.

2011-01-01

Effective talent-identification procedures minimize the proportion of students whose subsequent performance indicates that they were mistakenly included in or excluded from the program. Classification errors occur when students who were predicted to excel subsequently do not excel or when students who were not predicted to excel do. Using a…

The Climate Variability & Predictability (CVP) Program at NOAA - Observing and Understanding Processes Affecting the Propagation of Intraseasonal Oscillations in the Maritime Continent Region

NASA Astrophysics Data System (ADS)

Lucas, S. E.

2017-12-01

The Climate Variability & Predictability (CVP) Program supports research aimed at providing process-level understanding of the climate system through observation, modeling, analysis, and field studies. This vital knowledge is needed to improve climate models and predictions so that scientists can better anticipate the impacts of future climate variability and change. To achieve its mission, the CVP Program supports research carried out at NOAA and other federal laboratories, NOAA Cooperative Institutes, and academic institutions. The Program also coordinates its sponsored projects with major national and international scientific bodies including the World Climate Research Programme (WCRP), the International and U.S. Climate Variability and Predictability (CLIVAR/US CLIVAR) Program, and the U.S. Global Change Research Program (USGCRP). The CVP program sits within NOAA's Climate Program Office (http://cpo.noaa.gov/CVP). In 2017, the CVP Program had a call for proposals focused on observing and understanding processes affecting the propagation of intraseasonal oscillations in the Maritime Continent region. This poster will present the recently funded CVP projects, the expected scientific outcomes, the geographic areas of their work in the Maritime Continent region, and the collaborations with the Office of Naval Research, Indonesian Agency for Meteorology, Climatology and Geophysics (BMKG), Japan Agency for Marine-Earth Science and Technology (JAMSTEC) and other partners.

A review and update of the NASA aircraft noise prediction program propeller analysis system

NASA Technical Reports Server (NTRS)

Golub, Robert A.; Nguyen, L. Cathy

1989-01-01

The National Aeronautics and Space Administration (NASA) Aircraft Noise Prediction Program (ANOPP) Propeller Analysis System (PAS) is a set of computational modules for predicting the aerodynamics, performance, and noise of propellers. The ANOPP PAS has the capability to predict noise levels for propeller aircraft certification and produce parametric scaling laws for the adjustment of measured data to reference conditions. A technical overview of the prediction techniques incorporated into the system is presented. The prediction system has been applied to predict the noise signature of a variety of propeller configurations including the effects of propeller angle of attack. A summary of these validation studies is discussed with emphasis being placed on the wind tunnel and flight test programs sponsored by the Federal Aviation Administration (FAA) for the Piper Cherokee Lance aircraft. A number of modifications and improvements have been made to the system and both DEC VAX and IBM-PC versions of the system have been added to the original CDC NOS version.

Aircraft noise source and computer programs - User's guide

NASA Technical Reports Server (NTRS)

Crowley, K. C.; Jaeger, M. A.; Meldrum, D. F.

1973-01-01

The application of computer programs for predicting the noise-time histories and noise contours for five types of aircraft is reported. The aircraft considered are: (1) turbojet, (2) turbofan, (3) turboprop, (4) V/STOL, and (5) helicopter. Three principle considerations incorporated in the design of the noise prediction program are core effectiveness, limited input, and variable output reporting.

Predicting Success: How Predictive Analytics Are Transforming Student Support and Success Programs

ERIC Educational Resources Information Center

Boerner, Heather

2015-01-01

Every year, Lone Star College in Texas hosts a "Men of Honor" program to provide assistance and programming to male students, but particularly those who are Hispanic and black, in hopes their academic performance will improve. Lone Star might have kept directing its limited resources toward these students--and totally missed the subset…

Verification of MICNOISE computer program for the prediction of highway noise : part II : additional verification of MICNOISE version 5.

DOT National Transportation Integrated Search

1975-01-01

This is a continuation of an earlier report in which the MICNOISE computer program for the prediction of highway noise was evaluated. The outputs of the MICNOISE program are the L50 and LI0 sound pressure levels, i.e., those levels experienced 50% an...

Predicting Dropout Student: An Application of Data Mining Methods in an Online Education Program

ERIC Educational Resources Information Center

Yukselturk, Erman; Ozekes, Serhat; Turel, Yalin Kilic

2014-01-01

This study examined the prediction of dropouts through data mining approaches in an online program. The subject of the study was selected from a total of 189 students who registered to the online Information Technologies Certificate Program in 2007-2009. The data was collected through online questionnaires (Demographic Survey, Online Technologies…

Life prediction of turbine components: On-going studies at the NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Spera, D. A.; Grisaffe, S. J.

1973-01-01

An overview is presented of the many studies at NASA-Lewis that form the turbine component life prediction program. This program has three phases: (1) development of life prediction methods for major failure modes through materials studies, (2) evaluation and improvement of these methods through a variety of burner rig studies on simulated components in research engines and advanced rigs. These three phases form a cooperative, interdisciplinary program. A bibliography of Lewis publications on fatigue, oxidation and coatings, and turbine engine alloys is included.

ANOPP programmer's reference manual for the executive System. [aircraft noise prediction program

NASA Technical Reports Server (NTRS)

Gillian, R. E.; Brown, C. G.; Bartlett, R. W.; Baucom, P. H.

1977-01-01

Documentation for the Aircraft Noise Prediction Program as of release level 01/00/00 is presented in a manual designed for programmers having a need for understanding the internal design and logical concepts of the executive system software. Emphasis is placed on providing sufficient information to modify the system for enhancements or error correction. The ANOPP executive system includes software related to operating system interface, executive control, and data base management for the Aircraft Noise Prediction Program. It is written in Fortran IV for use on CDC Cyber series of computers.

The role of predictive uncertainty in the operational management of reservoirs

NASA Astrophysics Data System (ADS)

Todini, E.

2014-09-01

The present work deals with the operational management of multi-purpose reservoirs, whose optimisation-based rules are derived, in the planning phase, via deterministic (linear and nonlinear programming, dynamic programming, etc.) or via stochastic (generally stochastic dynamic programming) approaches. In operation, the resulting deterministic or stochastic optimised operating rules are then triggered based on inflow predictions. In order to fully benefit from predictions, one must avoid using them as direct inputs to the reservoirs, but rather assess the "predictive knowledge" in terms of a predictive probability density to be operationally used in the decision making process for the estimation of expected benefits and/or expected losses. Using a theoretical and extremely simplified case, it will be shown why directly using model forecasts instead of the full predictive density leads to less robust reservoir management decisions. Moreover, the effectiveness and the tangible benefits for using the entire predictive probability density instead of the model predicted values will be demonstrated on the basis of the Lake Como management system, operational since 1997, as well as on the basis of a case study on the lake of Aswan.

Transfer of Training After an Organizational Intervention in Swedish Sports Clubs: A Self-Determination Theory Perspective.

PubMed

Stenling, Andreas; Tafvelin, Susanne

2016-10-01

Leadership development programs are common in sports, but seldom evaluated; hence, we have limited knowledge about what the participants actually learn and the impact these programs have on sports clubs' daily operations. The purpose of the current study was to integrate a transfer of training model with self-determination theory to understand predictors of learning and training transfer, following a leadership development program among organizational leaders in Swedish sports clubs. Bayesian multilevel path analysis showed that autonomous motivation and an autonomy-supportive implementation of the program positively predicted near transfer (i.e., immediately after the training program) and that perceiving an autonomy-supportive climate in the sports club positively predicted far transfer (i.e., 1 year after the training program). This study extends previous research by integrating a transfer of training model with self-determination theory and identified important motivational factors that predict near and far training transfer.

Students' Midprogram Content Area Performance as a Predictor of End-of-Program NCLEX Readiness.

PubMed

Brussow, Jennifer A; Dunham, Michelle

2017-12-22

Many programs have implemented end-of-program predictive testing to identify students at risk of NCLEX-RN failure. Unfortunately, for many students, end-of-program testing comes too late. Regression and relative importance analysis were used to explore relationships between 9 content area assessments and an end-of-program assessment shown to be predictive of NCLEX-RN success. Results indicate that scores on assessments for content areas such as medical surgical nursing and care of children are predictive of end-of-program test scores, suggesting that instructors should provide remediation at the first sign of lagging performance.This is an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited. The work cannot be changed in anyway or used commercially without permission from the journal.

Multi-gene genetic programming based predictive models for municipal solid waste gasification in a fluidized bed gasifier.

PubMed

Pandey, Daya Shankar; Pan, Indranil; Das, Saptarshi; Leahy, James J; Kwapinski, Witold

2015-03-01

A multi-gene genetic programming technique is proposed as a new method to predict syngas yield production and the lower heating value for municipal solid waste gasification in a fluidized bed gasifier. The study shows that the predicted outputs of the municipal solid waste gasification process are in good agreement with the experimental dataset and also generalise well to validation (untrained) data. Published experimental datasets are used for model training and validation purposes. The results show the effectiveness of the genetic programming technique for solving complex nonlinear regression problems. The multi-gene genetic programming are also compared with a single-gene genetic programming model to show the relative merits and demerits of the technique. This study demonstrates that the genetic programming based data-driven modelling strategy can be a good candidate for developing models for other types of fuels as well. Copyright © 2014 Elsevier Ltd. All rights reserved.

Predicting oligonucleotide affinity to nucleic acid targets.

PubMed Central

Mathews, D H; Burkard, M E; Freier, S M; Wyatt, J R; Turner, D H

1999-01-01

A computer program, OligoWalk, is reported that predicts the equilibrium affinity of complementary DNA or RNA oligonucleotides to an RNA target. This program considers the predicted stability of the oligonucleotide-target helix and the competition with predicted secondary structure of both the target and the oligonucleotide. Both unimolecular and bimolecular oligonucleotide self structure are considered with a user-defined concentration. The application of OligoWalk is illustrated with three comparisons to experimental results drawn from the literature. PMID:10580474

Study of inducer load and stress, volume 2

NASA Technical Reports Server (NTRS)

1972-01-01

A program of analysis, design, fabrication and testing has been conducted to develop computer programs for predicting rocket engine turbopump inducer hydrodynamic loading, stress magnitude and distribution, and vibration characteristics. Methods of predicting blade loading, stress, and vibration characteristics were selected from a literature search and used as a basis for the computer programs. An inducer, representative of typical rocket engine inducers, was designed, fabricated, and tested with special instrumentation selected to provide measurements of blade surface pressures and stresses. Data from the tests were compared with predicted values and the computer programs were revised as required to improve correlation. For Volume 1 see N71-20403. For Volume 2 see N71-20404.

PREVAPORATION PERFORMANCE PREDICTION SOFTWARE

EPA Science Inventory

The Pervaporation, Performance, Prediction Software and Database (PPPS&D) computer software program is currently being developed within the USEPA, NRMRL. The purpose of the PPPS&D program is to educate and assist potential users in identifying opportunities for using pervaporati...

Large-scale linear programs in planning and prediction.

DOT National Transportation Integrated Search

2017-06-01

Large-scale linear programs are at the core of many traffic-related optimization problems in both planning and prediction. Moreover, many of these involve significant uncertainty, and hence are modeled using either chance constraints, or robust optim...

Program Predicts Nonlinear Inverter Performance

NASA Technical Reports Server (NTRS)

Al-Ayoubi, R. R.; Oepomo, T. S.

1985-01-01

Program developed for ac power distribution system on Shuttle orbiter predicts total load on inverters and node voltages at each of line replaceable units (LRU's). Mathematical model simulates inverter performance at each change of state in power distribution system.

Lattice-free prediction of three-dimensional structure of programmed DNA assemblies

PubMed Central

Pan, Keyao; Kim, Do-Nyun; Zhang, Fei; Adendorff, Matthew R.; Yan, Hao; Bathe, Mark

2014-01-01

DNA can be programmed to self-assemble into high molecular weight 3D assemblies with precise nanometer-scale structural features. Although numerous sequence design strategies exist to realize these assemblies in solution, there is currently no computational framework to predict their 3D structures on the basis of programmed underlying multi-way junction topologies constrained by DNA duplexes. Here, we introduce such an approach and apply it to assemblies designed using the canonical immobile four-way junction. The procedure is used to predict the 3D structure of high molecular weight planar and spherical ring-like origami objects, a tile-based sheet-like ribbon, and a 3D crystalline tensegrity motif, in quantitative agreement with experiments. Our framework provides a new approach to predict programmed nucleic acid 3D structure on the basis of prescribed secondary structure motifs, with possible application to the design of such assemblies for use in biomolecular and materials science. PMID:25470497

Aircraft noise prediction program validation

NASA Technical Reports Server (NTRS)

Shivashankara, B. N.

1980-01-01

A modular computer program (ANOPP) for predicting aircraft flyover and sideline noise was developed. A high quality flyover noise data base for aircraft that are representative of the U.S. commercial fleet was assembled. The accuracy of ANOPP with respect to the data base was determined. The data for source and propagation effects were analyzed and suggestions for improvements to the prediction methodology are given.

Predicting Student Grades in Learning Management Systems with Multiple Instance Genetic Programming

ERIC Educational Resources Information Center

Zafra, Amelia; Ventura, Sebastian

2009-01-01

The ability to predict a student's performance could be useful in a great number of different ways associated with university-level learning. In this paper, a grammar guided genetic programming algorithm, G3P-MI, has been applied to predict if the student will fail or pass a certain course and identifies activities to promote learning in a…

Predicting Performance in Higher Education Using Proximal Predictors.

PubMed

Niessen, A Susan M; Meijer, Rob R; Tendeiro, Jorge N

2016-01-01

We studied the validity of two methods for predicting academic performance and student-program fit that were proximal to important study criteria. Applicants to an undergraduate psychology program participated in a selection procedure containing a trial-studying test based on a work sample approach, and specific skills tests in English and math. Test scores were used to predict academic achievement and progress after the first year, achievement in specific course types, enrollment, and dropout after the first year. All tests showed positive significant correlations with the criteria. The trial-studying test was consistently the best predictor in the admission procedure. We found no significant differences between the predictive validity of the trial-studying test and prior educational performance, and substantial shared explained variance between the two predictors. Only applicants with lower trial-studying scores were significantly less likely to enroll in the program. In conclusion, the trial-studying test yielded predictive validities similar to that of prior educational performance and possibly enabled self-selection. In admissions aimed at student-program fit, or in admissions in which past educational performance is difficult to use, a trial-studying test is a good instrument to predict academic performance.

A computer program to predict rotor rotational noise of a stationary rotor from blade loading coefficient

NASA Technical Reports Server (NTRS)

Ramakrishnan, R.; Randall, D.; Hosier, R. N.

1976-01-01

The programing language used is FORTRAN IV. A description of all main and subprograms is provided so that any user possessing a FORTRAN compiler and random access capability can adapt the program to his facility. Rotor blade surface-pressure spectra can be used by the program to calculate: (1) blade station loading spectra, (2) chordwise and/or spanwise integrated blade-loading spectra, and (3) far-field rotational noise spectra. Any of five standard inline functions describing the chordwise distribution of the blade loading can be chosen in order to study parametrically the acoustic predictions. The program output consists of both printed and graphic descriptions of the blade-loading coefficient spectra and far-field acoustic spectrum. The results may also be written on binary file for future processing. Examples of the application of the program along with a description of the rotational noise prediction theory on which the program is based are also provided.

STC-SAB program users manual for the turbulent boundary layer and turbulent separation prediction methods employed in the NASA Langley streamtube curvature computer program

NASA Technical Reports Server (NTRS)

Ferguson, D. R.

1972-01-01

The streamtube curvature program (STC) has been developed to predict the inviscid flow field and the pressure distribution about nacelles at transonic speeds. The effects of boundary layer are to displace the inviscid flow and effectively change the body shape. Thus, the body shape must be corrected by the displacement thickness in order to calculate the correct pressure distribution. This report describes the coupling of the Stratford and Beavers boundary layer solution with the inviscid STC analysis so that all nacelle pressure forces, friction drag, and incipient separation may be predicted. The usage of the coupled STC-SAB computer program is outlined and the program input and output are defined. Included in this manual are descriptions of the principal boundary layer tables and other revisions to the STC program. The use of the viscous option is controlled by the engineer during program input definition.

Reliability of nine programs of topological predictions and their application to integral membrane channel and carrier proteins.

PubMed

Reddy, Abhinay; Cho, Jaehoon; Ling, Sam; Reddy, Vamsee; Shlykov, Maksim; Saier, Milton H

2014-01-01

We evaluated topological predictions for nine different programs, HMMTOP, TMHMM, SVMTOP, DAS, SOSUI, TOPCONS, PHOBIUS, MEMSAT-SVM (hereinafter referred to as MEMSAT), and SPOCTOPUS. These programs were first evaluated using four large topologically well-defined families of secondary transporters, and the three best programs were further evaluated using topologically more diverse families of channels and carriers. In the initial studies, the order of accuracy was: SPOCTOPUS > MEMSAT > HMMTOP > TOPCONS > PHOBIUS > TMHMM > SVMTOP > DAS > SOSUI. Some families, such as the Sugar Porter Family (2.A.1.1) of the Major Facilitator Superfamily (MFS; TC #2.A.1) and the Amino Acid/Polyamine/Organocation (APC) Family (TC #2.A.3), were correctly predicted with high accuracy while others, such as the Mitochondrial Carrier (MC) (TC #2.A.29) and the K(+) transporter (Trk) families (TC #2.A.38), were predicted with much lower accuracy. For small, topologically homogeneous families, SPOCTOPUS and MEMSAT were generally most reliable, while with large, more diverse superfamilies, HMMTOP often proved to have the greatest prediction accuracy. We next developed a novel program, TM-STATS, that tabulates HMMTOP, SPOCTOPUS or MEMSAT-based topological predictions for any subdivision (class, subclass, superfamily, family, subfamily, or any combination of these) of the Transporter Classification Database (TCDB; www.tcdb.org) and examined the following subclasses: α-type channel proteins (TC subclasses 1.A and 1.E), secreted pore-forming toxins (TC subclass 1.C) and secondary carriers (subclass 2.A). Histograms were generated for each of these subclasses, and the results were analyzed according to subclass, family and protein. The results provide an update of topological predictions for integral membrane transport proteins as well as guides for the development of more reliable topological prediction programs, taking family-specific characteristics into account. © 2014 S. Karger AG, Basel.

Practical application of computer programs for supersonic combustion

NASA Technical Reports Server (NTRS)

Groves, F. R., Jr.

1972-01-01

Experimental data were interpreted using two supersonic combustion computer programs. The P1 program is based on a conventional boundary layer treatment of the mixing of concentric gas streams and complete combustion chemistry. The H1 program is based on a modified boundary layer approach which accounts for radial pressure gradients in the flow and also incorporates a finite rate chemistry calculation. The objective of the investigation was to compare the experimental data with theoretical predictions of the two programs with special emphasis on the prediction of radial pressure gradients by the H1 program. A test of the H1 program was also desired through comparison with the experimental data and with the P1 program.

MODFLOW-2000, the U.S. Geological Survey modular ground-water model -- Documentation of MOD-PREDICT for predictions, prediction sensitivity analysis, and evaluation of uncertainty

USGS Publications Warehouse

Tonkin, M.J.; Hill, Mary C.; Doherty, John

2003-01-01

This document describes the MOD-PREDICT program, which helps evaluate userdefined sets of observations, prior information, and predictions, using the ground-water model MODFLOW-2000. MOD-PREDICT takes advantage of the existing Observation and Sensitivity Processes (Hill and others, 2000) by initiating runs of MODFLOW-2000 and using the output files produced. The names and formats of the MODFLOW-2000 input files are unchanged, such that full backward compatibility is maintained. A new name file and input files are required for MOD-PREDICT. The performance of MOD-PREDICT has been tested in a variety of applications. Future applications, however, might reveal errors that were not detected in the test simulations. Users are requested to notify the U.S. Geological Survey of any errors found in this document or the computer program using the email address available at the web address below. Updates might occasionally be made to this document, to the MOD-PREDICT program, and to MODFLOW- 2000. Users can check for updates on the Internet at URL http://water.usgs.gov/software/ground water.html/.

Climate Dynamics and Experimental Prediction (CDEP) and Regional Integrated Science Assessments (RISA) Programs at NOAA Office of Global Programs

NASA Astrophysics Data System (ADS)

Bamzai, A.

2003-04-01

This talk will highlight science and application activities of the CDEP and RISA programs at NOAA OGP. CDEP, through a set of Applied Research Centers (ARCs), supports NOAA's program of quantitative assessments and predictions of global climate variability and its regional implications on time scales of seasons to centuries. The RISA program consolidates results from ongoing disciplinary process research under an integrative framework. Examples of joint CDEP-RISA activities will be presented. Future directions and programmatic challenges will also be discussed.

Computer program documentation: Raw-to-processed SINDA program (RTOPHS) user's guide

NASA Technical Reports Server (NTRS)

Damico, S. J.

1980-01-01

Use of the Raw to Processed SINDA(System Improved Numerical Differencing Analyzer) Program, RTOPHS, which provides a means of making the temperature prediction data on binary HSTFLO and HISTRY units generated by SINDA available to engineers in an easy to use format, is discussed. The program accomplishes this by reading the HISTRY unit and according to user input instructions, the desired times and temperature prediction data are extracted and written to a word addressable drum file.

Predictive Modeling of Student Performances for Retention and Academic Support in a Diagnostic Medical Sonography Program

ERIC Educational Resources Information Center

Borghese, Peter; Lacey, Sandi

2014-01-01

As part of a retention and academic support program, data was collected to develop a predictive model of student performances in core classes in a Diagnostic Medical Sonography (DMS) program. The research goal was to identify students likely to have difficulty with coursework and provide supplemental tutorial support. The focus was on the…

Word Prediction Programs with Phonetic Spelling Support: Performance Comparisons and Impact on Journal Writing for Students with Writing Difficulties

ERIC Educational Resources Information Center

Evmenova, Anna S.; Graff, Heidi J.; Jerome, Marci Kinas; Behrmann, Michael M.

2010-01-01

This investigation examined the effects of currently available word prediction software programs that support phonetic/inventive spelling on the quality of journal writing by six students with severe writing and/or spelling difficulties in grades three through six during a month-long summer writing program. A changing conditions single-subject…

Five Years Later: Predicting Student Use of Journals in a New Water Resources Graduate Program

ERIC Educational Resources Information Center

Wirth, Andrea A.; Mellinger, Margaret

2011-01-01

Using citation analysis, the authors examined the journals cited in theses and dissertations over the first five years of the Water Resources Graduate Program at Oregon State University. These journal titles were compared to the titles predicted as being important in the 2003 Oregon State University Libraries new program (Category I) review. A…

Application of TURBO-AE to Flutter Prediction: Aeroelastic Code Development

NASA Technical Reports Server (NTRS)

Hoyniak, Daniel; Simons, Todd A.; Stefko, George (Technical Monitor)

2001-01-01

The TURBO-AE program has been evaluated by comparing the obtained results to cascade rig data and to prediction made from various in-house programs. A high-speed fan cascade, a turbine cascade, a turbine cascade and a fan geometry that shower flutter in torsion mode were analyzed. The steady predictions for the high-speed fan cascade showed the TURBO-AE predictions to match in-house codes. However, the predictions did not match the measured blade surface data. Other researchers also reported similar disagreement with these data set. Unsteady runs for the fan configuration were not successful using TURBO-AE .

Munition Penetration Depth Prediction: SERDP SEED Project MR 2629

DTIC Science & Technology

2017-08-01

ER D C/ CR RE L TR -1 7- 12 Strategic Environmental Research and Development Program (SERDP) Munition Penetration-Depth Prediction...release; distribution is unlimited. The U.S. Army Engineer Research and Development Center (ERDC) solves the nation’s toughest engineering and... Research and Development Program (SERDP) ERDC/CRREL TR-17-12 August 2017 Munition Penetration-Depth Prediction SERDP SEED Project MR-2629 Arnold J

Analysis of Satellite Communications Antenna Patterns

NASA Technical Reports Server (NTRS)

Rahmat-Samii, Y.

1985-01-01

Computer program accurately and efficiently predicts far-field patterns of offset, or symmetric, parabolic reflector antennas. Antenna designer uses program to study effects of varying geometrical and electrical (RF) parameters of parabolic reflector and its feed system. Accurate predictions of far-field patterns help designer predict overall performance of antenna. These reflectors used extensively in modern communications satellites and in multiple-beam and low side-lobe antenna systems.

Evaluation of methods for determining hardware projected life

NASA Technical Reports Server (NTRS)

1971-01-01

An investigation of existing methods of predicting hardware life is summarized by reviewing programs having long life requirements, current research efforts on long life problems, and technical papers reporting work on life predicting techniques. The results indicate that there are no accurate quantitative means to predict hardware life for system level hardware. The effectiveness of test programs and the cause of hardware failures is considered.

Chemistry by Computer.

ERIC Educational Resources Information Center

Garmon, Linda

1981-01-01

Describes the features of various computer chemistry programs. Utilization of computer graphics, color, digital imaging, and other innovations are discussed in programs including those which aid in the identification of unknowns, predict whether chemical reactions are feasible, and predict the biological activity of xenobiotic compounds. (CS)

Program For Joule-Thomson Analysis Of Mixed Cryogens

NASA Technical Reports Server (NTRS)

Jones, Jack A.; Lund, Alan

1994-01-01

JTMIX computer program predicts ideal and realistic properties of mixed gases at temperatures between 65 and 80 K. Performs Joule-Thomson analysis of any gaseous mixture of neon, nitrogen, various hydrocarbons, argon, oxygen, carbon monoxide, carbon dioxide, and hydrogen sulfide. When used in conjunction with DDMIX computer program of National Institute of Standards and Technology (NIST), JTMIX accurately predicts order-of-magnitude increases in Joule-Thomson cooling capacities occuring when various hydrocarbons added to nitrogen. Also predicts boiling temperature of nitrogen depressed from normal value to as low as 60 K upon addition of neon. Written in Turbo C.

The Brand's PREACH Model: Predicting Readiness to Engage African American Churches in Health.

PubMed

Brand, Dorine J; Alston, Reginald J

2017-09-01

Despite many attempts to reduce health disparities, health professionals face obstacles in improving poor health outcomes within the African American (AA) community. To promote change for improved health measures, it is important to implement culturally tailored programming through a trusted institution, such as the AA church. While churches have the potential to play an important role in positively impacting health among AAs, it is unclear what attributes are necessary to predict success or failure for health promotion within these institutions. The purpose of this study was to create a model, the Brand's PREACH ( Predicting Readiness to Engage African American Churches in Health) Model, to predict the readiness of AA churches to engage in health promotion programming. Thirty-six semistructured key informant interviews were conducted with 12 pastors, 12 health leaders, and 12 congregants to gain information on the relationship between church infrastructure (physical structure, personnel, funding, and social/cultural support), readiness, and health promotion programming. The findings revealed that church infrastructure has an association with and will predict the readiness of a church to engage in health promotion programming. The ability to identify readiness early on will be useful for developing, implementing, and evaluating faith-based interventions, in partnership with churches, which is a key factor for sustainable and effective programs.

Users' manual for the Langley high speed propeller noise prediction program (DFP-ATP)

NASA Technical Reports Server (NTRS)

Dunn, M. H.; Tarkenton, G. M.

1989-01-01

The use of the Dunn-Farassat-Padula Advanced Technology Propeller (DFP-ATP) noise prediction program which computes the periodic acoustic pressure signature and spectrum generated by propellers moving with supersonic helical tip speeds is described. The program has the capacity of predicting noise produced by a single-rotation propeller (SRP) or a counter-rotation propeller (CRP) system with steady or unsteady blade loading. The computational method is based on two theoretical formulations developed by Farassat. One formulation is appropriate for subsonic sources, and the other for transonic or supersonic sources. Detailed descriptions of user input, program output, and two test cases are presented, as well as brief discussions of the theoretical formulations and computational algorithms employed.

The Predictive Validity of Measures of Teacher Candidate Programs and Performance: Toward an Evidence-Based Approach to Teacher Preparation

ERIC Educational Resources Information Center

Henry, Gary T.; Campbell, Shanyce L.; Thompson, Charles L.; Patriarca, Linda A.; Luterbach, Kenneth J.; Lys, Diana B.; Covington, Vivian Martin

2013-01-01

Calls for evidence-based reform of teacher preparation programs (TPPs) suggest the question: Do the current indicators of progress and performance used by TPPs predict effectiveness of their graduates when they become teachers? In this study, the indicators of progress and performance used by one program are examined for their ability to predict…

cnvScan: a CNV screening and annotation tool to improve the clinical utility of computational CNV prediction from exome sequencing data.

PubMed

Samarakoon, Pubudu Saneth; Sorte, Hanne Sørmo; Stray-Pedersen, Asbjørg; Rødningen, Olaug Kristin; Rognes, Torbjørn; Lyle, Robert

2016-01-14

With advances in next generation sequencing technology and analysis methods, single nucleotide variants (SNVs) and indels can be detected with high sensitivity and specificity in exome sequencing data. Recent studies have demonstrated the ability to detect disease-causing copy number variants (CNVs) in exome sequencing data. However, exonic CNV prediction programs have shown high false positive CNV counts, which is the major limiting factor for the applicability of these programs in clinical studies. We have developed a tool (cnvScan) to improve the clinical utility of computational CNV prediction in exome data. cnvScan can accept input from any CNV prediction program. cnvScan consists of two steps: CNV screening and CNV annotation. CNV screening evaluates CNV prediction using quality scores and refines this using an in-house CNV database, which greatly reduces the false positive rate. The annotation step provides functionally and clinically relevant information using multiple source datasets. We assessed the performance of cnvScan on CNV predictions from five different prediction programs using 64 exomes from Primary Immunodeficiency (PIDD) patients, and identified PIDD-causing CNVs in three individuals from two different families. In summary, cnvScan reduces the time and effort required to detect disease-causing CNVs by reducing the false positive count and providing annotation. This improves the clinical utility of CNV detection in exome data.

Aircraft noise prediction program theoretical manual: Rotorcraft System Noise Prediction System (ROTONET), part 4

NASA Technical Reports Server (NTRS)

Weir, Donald S.; Jumper, Stephen J.; Burley, Casey L.; Golub, Robert A.

1995-01-01

This document describes the theoretical methods used in the rotorcraft noise prediction system (ROTONET), which is a part of the NASA Aircraft Noise Prediction Program (ANOPP). The ANOPP code consists of an executive, database manager, and prediction modules for jet engine, propeller, and rotor noise. The ROTONET subsystem contains modules for the prediction of rotor airloads and performance with momentum theory and prescribed wake aerodynamics, rotor tone noise with compact chordwise and full-surface solutions to the Ffowcs-Williams-Hawkings equations, semiempirical airfoil broadband noise, and turbulence ingestion broadband noise. Flight dynamics, atmosphere propagation, and noise metric calculations are covered in NASA TM-83199, Parts 1, 2, and 3.

Prediction of rodent carcinogenicity bioassays from molecular structure using inductive logic programming

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, R.D.; Srinivasan, A.

1996-10-01

The machine learning program Progol was applied to the problem of forming the structure-activity relationship (SAR) for a set of compounds tested for carcinogenicity in rodent bioassays by the U.S. National Toxicology Program (NTP). Progol is the first inductive logic programming (ILP) algorithm to use a fully relational method for describing chemical structure in SARs, based on using atoms and their bond connectivities. Progol is well suited to forming SARs for carcinogenicity as it is designed to produce easily understandable rules (structural alerts) for sets of noncongeneric compounds. The Progol SAR method was tested by prediction of a set ofmore » compounds that have been widely predicted by other SAR methods (the compounds used in the NTP`s first round of carcinogenesis predictions). For these compounds no method (human or machine) was significantly more accurate than Progol. Progol was the most accurate method that did not use data from biological tests on rodents (however, the difference in accuracy is not significant). The Progol predictions were based solely on chemical structure and the results of tests for Salmonella mutagenicity. Using the full NTP database, the prediction accuracy of Progol was estimated to be 63% ({+-}3%) using 5-fold cross validation. A set of structural alerts for carcinogenesis was automatically generated and the chemical rationale for them investigated-these structural alerts are statistically independent of the Salmonella mutagenicity. Carcinogenicity is predicted for the compounds used in the NTP`s second round of carcinogenesis predictions. The results for prediction of carcinogenesis, taken together with the previous successful applications of predicting mutagenicity in nitroaromatic compounds, and inhibition of angiogenesis by suramin analogues, show that Progol has a role to play in understanding the SARs of cancer-related compounds. 29 refs., 2 figs., 4 tabs.« less

3D flexible alignment using 2D maximum common substructure: dependence of prediction accuracy on target-reference chemical similarity.

PubMed

Kawabata, Takeshi; Nakamura, Haruki

2014-07-28

A protein-bound conformation of a target molecule can be predicted by aligning the target molecule on the reference molecule obtained from the 3D structure of the compound-protein complex. This strategy is called "similarity-based docking". For this purpose, we develop the flexible alignment program fkcombu, which aligns the target molecule based on atomic correspondences with the reference molecule. The correspondences are obtained by the maximum common substructure (MCS) of 2D chemical structures, using our program kcombu. The prediction performance was evaluated using many target-reference pairs of superimposed ligand 3D structures on the same protein in the PDB, with different ranges of chemical similarity. The details of atomic correspondence largely affected the prediction success. We found that topologically constrained disconnected MCS (TD-MCS) with the simple element-based atomic classification provides the best prediction. The crashing potential energy with the receptor protein improved the performance. We also found that the RMSD between the predicted and correct target conformations significantly correlates with the chemical similarities between target-reference molecules. Generally speaking, if the reference and target compounds have more than 70% chemical similarity, then the average RMSD of 3D conformations is <2.0 Å. We compared the performance with a rigid-body molecular alignment program based on volume-overlap scores (ShaEP). Our MCS-based flexible alignment program performed better than the rigid-body alignment program, especially when the target and reference molecules were sufficiently similar.

Application of an artificial intelligence program to therapy of high-risk surgical patients.

PubMed

Patil, R S; Adibi, J; Shoemaker, W C

1996-11-01

We developed an artificial intelligence program from a large computerized database of hemodynamic and oxygen transport measurements together with prior studies defining survivors' values, outcome predictors, and a branched-chain decision tree. The artificial intelligence program was then tested on the data of 100 survivors and 100 nonsurvivors not used for the development of the program or other analyses. Using the predictor as a surrogate outcome measure, the therapy recommended by the program improved the predicted outcome 3.16% per therapeutic intervention while the actual therapy given increased outcome 1.86% in surviving patients; the artificial intelligence-recommended therapy improved outcome 7.9% in nonsurvivors, while the actual therapy given increased predicted outcome -0.29% in nonsurvivors (p < .05). There were fewer patients whose predicted outcome decreased after recommended treatment (14%) than after the actual therapy given (37%). Review of therapy recommended by the program did not reveal instances of inappropriate or potentially harmful recommendations.

Use of genetic programming, logistic regression, and artificial neural nets to predict readmission after coronary artery bypass surgery.

PubMed

Engoren, Milo; Habib, Robert H; Dooner, John J; Schwann, Thomas A

2013-08-01

As many as 14 % of patients undergoing coronary artery bypass surgery are readmitted within 30 days. Readmission is usually the result of morbidity and may lead to death. The purpose of this study is to develop and compare statistical and genetic programming models to predict readmission. Patients were divided into separate Construction and Validation populations. Using 88 variables, logistic regression, genetic programs, and artificial neural nets were used to develop predictive models. Models were first constructed and tested on the Construction populations, then validated on the Validation population. Areas under the receiver operator characteristic curves (AU ROC) were used to compare the models. Two hundred and two patients (7.6 %) in the 2,644 patient Construction group and 216 (8.0 %) of the 2,711 patient Validation group were re-admitted within 30 days of CABG surgery. Logistic regression predicted readmission with AU ROC = .675 ± .021 in the Construction group. Genetic programs significantly improved the accuracy, AU ROC = .767 ± .001, p < .001). Artificial neural nets were less accurate with AU ROC = 0.597 ± .001 in the Construction group. Predictive accuracy of all three techniques fell in the Validation group. However, the accuracy of genetic programming (AU ROC = .654 ± .001) was still trivially but statistically non-significantly better than that of the logistic regression (AU ROC = .644 ± .020, p = .61). Genetic programming and logistic regression provide alternative methods to predict readmission that are similarly accurate.

Development of a program to fit data to a new logistic model for microbial growth.

PubMed

Fujikawa, Hiroshi; Kano, Yoshihiro

2009-06-01

Recently we developed a mathematical model for microbial growth in food. The model successfully predicted microbial growth at various patterns of temperature. In this study, we developed a program to fit data to the model with a spread sheet program, Microsoft Excel. Users can instantly get curves fitted to the model by inputting growth data and choosing the slope portion of a curve. The program also could estimate growth parameters including the rate constant of growth and the lag period. This program would be a useful tool for analyzing growth data and further predicting microbial growth.

ACToR - Aggregated Computational Toxicology Resource ...

EPA Pesticide Factsheets

There are too many uncharacterized environmental chemicals to test with current in vivo protocols. Develop predictive in vitro screening assays that can be used to prioritize chemicals for detailed testing. ToxCast program requires large amounts of data: In vitro assays (mainly generated by ToxCast program) and In vivo data to develop and validate predictive signatures ACToR is compiling both sets of data for use in predictive algorithms.

Aircraft noise prediction program propeller analysis system IBM-PC version user's manual version 2.0

NASA Technical Reports Server (NTRS)

Nolan, Sandra K.

1988-01-01

The IBM-PC version of the Aircraft Noise Prediction Program (ANOPP) Propeller Analysis System (PAS) is a set of computational programs for predicting the aerodynamics, performance, and noise of propellers. The ANOPP-PAS is a subset of a larger version of ANOPP which can be executed on CDC or VAX computers. This manual provides a description of the IBM-PC version of the ANOPP-PAS and its prediction capabilities, and instructions on how to use the system on an IBM-XT or IBM-AT personal computer. Sections within the manual document installation, system design, ANOPP-PAS usage, data entry preprocessors, and ANOPP-PAS functional modules and procedures. Appendices to the manual include a glossary of ANOPP terms and information on error diagnostics and recovery techniques.

VAPEPS user's reference manual, version 5.0

NASA Technical Reports Server (NTRS)

Park, D. M.

1988-01-01

This is the reference manual for the VibroAcoustic Payload Environment Prediction System (VAPEPS). The system consists of a computer program and a vibroacoustic database. The purpose of the system is to collect measurements of vibroacoustic data taken from flight events and ground tests, and to retrieve this data and provide a means of using the data to predict future payload environments. This manual describes the operating language of the program. Topics covered include database commands, Statistical Energy Analysis (SEA) prediction commands, stress prediction command, and general computational commands.

Feasibility of developing LSI microcircuit reliability prediction models

NASA Technical Reports Server (NTRS)

Ryerson, C. M.

1972-01-01

In the proposed modeling approach, when any of the essential key factors are not known initially, they can be approximated in various ways with a known impact on the accuracy of the final predictions. For example, on any program where reliability predictions are started at interim states of project completion, a-priori approximate estimates of the key factors are established for making preliminary predictions. Later these are refined for greater accuracy as subsequent program information of a more definitive nature becomes available. Specific steps to develop, validate and verify these new models are described.

Computer program for predicting creep behavior of bodies of revolution

NASA Technical Reports Server (NTRS)

Adams, R.; Greenbaum, G.

1971-01-01

Computer program, CRAB, uses finite-element method to calculate creep behavior and predict steady-state stresses in an arbitrary body of revolution subjected to a time-dependent axisymmetric load. Creep strains follow a time hardening law and a Prandtl-Reuss stress-strain relationship.

Comparison of theoretical and experimental thrust performance of a 1030:1 area ratio rocket nozzle at a chamber pressure of 2413 kN/sq m (350 psia)

NASA Technical Reports Server (NTRS)

Smith, Tamara A.; Pavli, Albert J.; Kacynski, Kenneth J.

1987-01-01

The Joint Army, Navy, NASA, Air Force (JANNAF) rocket-engine performance-prediction procedure is based on the use of various reference computer programs. One of the reference programs for nozzle analysis is the Two-Dimensional Kinetics (TDK) Program. The purpose of this report is to calibrate the JANNAF procedure that has been incorporated into the December 1984 version of the TDK program for the high-area-ratio rocket-engine regime. The calibration was accomplished by modeling the performance of a 1030:1 rocket nozzle tested at NASA Lewis. A detailed description of the test conditions and TDK input parameters is given. The reuslts indicate that the computer code predicts delivered vacuum specific impulse to within 0.12 to 1.9 percent of the experimental data. Vacuum thrust coefficient predictions were within + or - 1.3 percent of experimental results. Predictions of wall static pressure were within approximately + or - 5 percent of the measured values.

Computer program to minimize prediction error in models from experiments with 16 hypercube points and 0 to 6 center points

NASA Technical Reports Server (NTRS)

Holms, A. G.

1982-01-01

A previous report described a backward deletion procedure of model selection that was optimized for minimum prediction error and which used a multiparameter combination of the F - distribution and an order statistics distribution of Cochran's. A computer program is described that applies the previously optimized procedure to real data. The use of the program is illustrated by examples.

Does the Number of College Credits Earned in a Tech Prep and Postsecondary Enrollment Options Program Predict College Success?

ERIC Educational Resources Information Center

Meyer, Bruce A.

2011-01-01

The purpose of this study was to examine a Tech Prep Program located in Northwest Ohio and determine the degree to which college credits earned in high school through the Tech Prep and PSEO Programs predict college success and if there were any significant gender/race differences in credits earned and college success as well as high school…

Genetic polymorphisms to predict gains in maximal O2 uptake and knee peak torque after a high intensity training program in humans.

PubMed

Yoo, Jinho; Kim, Bo-Hyung; Kim, Soo-Hwan; Kim, Yangseok; Yim, Sung-Vin

2016-05-01

The study aimed to identify single nucleotide polymorphisms (SNPs) that significantly influenced the level of improvement of two kinds of training responses, including maximal O2 uptake (V'O2max) and knee peak torque of healthy adults participating in the high intensity training (HIT) program. The study also aimed to use these SNPs to develop prediction models for individual training responses. 79 Healthy volunteers participated in the HIT program. A genome-wide association study, based on 2,391,739 SNPs, was performed to identify SNPs that were significantly associated with gains in V'O2max and knee peak torque, following 9 weeks of the HIT program. To predict two training responses, two independent SNPs sets were determined using linear regression and iterative binary logistic regression analysis. False discovery rate analysis and permutation tests were performed to avoid false-positive findings. To predict gains in V'O2max, 7 SNPs were identified. These SNPs accounted for 26.0 % of the variance in the increment of V'O2max, and discriminated the subjects into three subgroups, non-responders, medium responders, and high responders, with prediction accuracy of 86.1 %. For the knee peak torque, 6 SNPs were identified, and accounted for 27.5 % of the variance in the increment of knee peak torque. The prediction accuracy discriminating the subjects into the three subgroups was estimated as 77.2 %. Novel SNPs found in this study could explain, and predict inter-individual variability in gains of V'O2max, and knee peak torque. Furthermore, with these genetic markers, a methodology suggested in this study provides a sound approach for the personalized training program.

Identification of cognitive and non-cognitive predictive variables related to attrition in baccalaureate nursing education programs in Mississippi

NASA Astrophysics Data System (ADS)

Hayes, Catherine

2005-07-01

This study sought to identify a variable or variables predictive of attrition among baccalaureate nursing students. The study was quantitative in design and multivariate correlational statistics and discriminant statistical analysis were used to identify a model for prediction of attrition. The analysis then weighted variables according to their predictive value to determine the most parsimonious model with the greatest predictive value. Three public university nursing education programs in Mississippi offering a Bachelors Degree in Nursing were selected for the study. The population consisted of students accepted and enrolled in these three programs for the years 2001 and 2002 and graduating in the years 2003 and 2004 (N = 195). The categorical dependent variable was attrition (includes academic failure or withdrawal) from the program of nursing education. The ten independent variables selected for the study and considered to have possible predictive value were: Grade Point Average for Pre-requisite Course Work; ACT Composite Score, ACT Reading Subscore, and ACT Mathematics Subscore; Letter Grades in the Courses: Anatomy & Physiology and Lab I, Algebra I, English I (101), Chemistry & Lab I, and Microbiology & Lab I; and Number of Institutions Attended (Universities, Colleges, Junior Colleges or Community Colleges). Descriptive analysis was performed and the means of each of the ten independent variables was compared for students who attrited and those who were retained in the population. The discriminant statistical analysis performed created a matrix using the ten variable model that was able to correctly predicted attrition in the study's population in 77.6% of the cases. Variables were then combined and recombined to produce the most efficient and parsimonious model for prediction. A six variable model resulted which weighted each variable according to predictive value: GPA for Prerequisite Coursework, ACT Composite, English I, Chemistry & Lab I, Microbiology & Lab I, and Number of Institutions Attended. Results of the study indicate that it is possible to predict attrition among students enrolled in baccalaureate nursing education programs and that additional investigation on the subject is warranted.

Study Of Flow About A Helicopter Rotor

NASA Technical Reports Server (NTRS)

Tauber, Michael E.; Owen, F. Kevin

1989-01-01

Noninvasive instrument verifies computer program predicting velocities. Laser velocimeter measurements confirm predictions of transonic flow field around tip of helicopter-rotor blade. Report discusses measurements, which yield high-resolution orthogonal velocity components of flow field at rotor-tip. Mach numbers from 0.85 to 0.95, and use of measurements in verifying ability of computer program ROT22 to predict transonic flow field, including occurrences, strengths, and locations of shock waves causing high drag and noise.

Toward Seamless Weather-Climate Prediction with a Global Cloud Resolving Model

DTIC Science & Technology

2016-01-14

distribution is unlimited. TOWARD SEAMLESS WEATHER- CLIMATE PREDICTION WITH A GLOBAL CLOUD RESOLVING MODEL PI: Tim Li IPRC/SOEST, University of Hawaii at...Project Final Report 3. DATES COVERED (From - To) 1 May 2012 - 30 September 2015 4. TITLE AND SUBTITLE TOWARD SEAMLESS WEATHER- CLIMATE PREDICTION WITH...A GLOBAL CLOUD RESOLVING MODEL 5a. CONTRACT NUMBER 5b. GRANT NUMBER N000141210450 5c. PROGRAM ELEMENT NUMBER ONR Marine Meteorology Program 6

United States Air Force Summer Research Program 1991. High School Apprenticeship Program (HSAP) Reports. Volume 11. Phillips Laboratory, Civil Engineering Laboratory

DTIC Science & Technology

1992-01-09

Crystal Polymers Tracy Reed Geophysics Laboratory (GEO) 9 Analysis of Model Output Statistics Thunderstorm Prediction Model Frank Lasley 10...four hours to twenty-four hours. It was predicted that the dogbones would turn brown once they reached the approximate annealing temperature. This was...LYS Hanscom AFB Frank A. Lasley Abstracft. Model Output Statistics (MOS) Thunderstorm prediction information and Service A weather observations

Thermal and Electrical Conductivity Probe for Phoenix Mars Lander

NASA Technical Reports Server (NTRS)

2007-01-01

NASA's Phoenix Mars Lander will assess how heat and electricity move through Martian soil from one spike or needle to another of a four-spike electronic fork that will be pushed into the soil at different stages of digging by the lander's Robotic Arm.

The four-spike tool, called the thermal and electrical conductivity probe, is in the middle-right of this photo, mounted near the end of the arm near the lander's scoop (upper left).

In one type of experiment with this tool, a pulse of heat will be put into one spike, and the rate at which the temperature rises on the nearby spike will be recorded, along with the rate at which the heated spike cools. A little bit of ice can make a big difference in how well soil conducts heat. Similarly, soil's electrical conductivity -- also tested with this tool -- is a sensitive

indicator of moisture in the soil. This device adapts technology used in soil-moisture gauges for irrigation-control systems. The conductivity probe has an additional role besides soil analysis. It will serve as a hunidity sensor when held in the air.

Primary sedimentary structures and the internal architecture of a Martian sand body in search of evidence for sand transport and deposition

NASA Technical Reports Server (NTRS)

Basu, Abhijit

1988-01-01

Lunar experiences show that unmanned sample return missions, despite limitations on sample size, can produce invaluable data to infer crustal processes, regolith processes, regolith-atmosphere/ionosphere interaction processes, etc. Drill cores provide a record of regolith evolution as well as a more complete sample of the regolith than small scoops and/or rakes. It is proposed that: (1) a hole be drilled in a sand body to obtain continuous oriented cores; a depth of about 10 m would be compatible with what we know of bed form hierarchy of terrestrial stream deposits; (2) two trenches, at right angles to each other and close to the drill-hole, be dug and the walls scraped lightly such that primary/internal sedimentary structures of the sand body become visible; (3) the walls of the trenches be made gravitationally stable by impregnation techniques; (4) acetate or other peels of a strip on each wall be taken; and (5) appropriately scaled photographs of the walls be taken at different sun-angles to ensure maximum ease of interpretation of sedimentary structures; and, to correlate these structural features with those in the core at different depth levels of the core.

Soil Properties Analysis of the Phoenix Landing Site Based on Trench Characteristics and Robotic Arm Forces

NASA Astrophysics Data System (ADS)

Shaw, A.; Arvidson, R.; Bonitz, R.; Carsten, J.; Keller, H.; Lemmon, M.; Mellon, M. T.; Robinson, M.; Trebi-Ollennu, A.; Volpe, R.

2008-12-01

The Phoenix Mars lander has had access to polygonal terrain; specifically, two polygons and a trough. Slopes in the trenches and dump piles created from the interaction of the Phoenix robotic arm (RA) with the soil around its landing site are similar to those seen on previous missions, such as the MER and Viking missions. This indicates similar cohesion and angle of internal friction to previous landing sites. For example, trench slopes typically range from 44-72° and dump pile slopes range from 20-30°. There are at least two very different types of materials at the site: a layer of soil which goes down to several centimeters below the surface and, below that, a layer of icy soil. The RA can easily dig through the top layer of soil, often using 20-30N force. However, when it encounters icy soil, the RA requires tens of scrapes with the lower tungsten carbide blade on its scoop to progress even a few millimeters. To verify soil property parameters, we analyze the normal and shear stresses exerted on the soil by digging, scraping, and rasping with the RA.

An Experimental Investigation of Dextrous Robots Using EVA Tools and Interfaces

NASA Technical Reports Server (NTRS)

Ambrose, Robert; Culbert, Christopher; Rehnmark, Frederik

2001-01-01

This investigation of robot capabilities with extravehicular activity (EVA) equipment looks at how improvements in dexterity are enabling robots to perform tasks once thought to be beyond machines. The approach is qualitative, using the Robonaut system at the Johnson Space Center (JSC), performing task trials that offer a quick look at this system's high degree of dexterity and the demands of EVA. Specific EVA tools attempted include tether hooks, power torque tools, and rock scoops, as well as conventional tools like scissors, wire strippers, forceps, and wrenches. More complex EVA equipment was also studied, with more complete tasks that mix tools, EVA hand rails, tethers, tools boxes, PIP pins, and EVA electrical connectors. These task trials have been ongoing over an 18 month period, as the Robonaut system evolved to its current 43 degree of freedom (DOF) configuration, soon to expand to over 50. In each case, the number of teleoperators is reported, with rough numbers of attempts and their experience level, with a subjective difficulty rating assigned to each piece of EVA equipment and function. JSC' s Robonaut system was successful with all attempted EVA hardware, suggesting new options for human and robot teams working together in space.

Extraction of amino acids from aerogel for analysis by capillary electrophoresis. Implications for a mission concept to Enceladus' Plume.

PubMed

Mora, Maria F; Jones, Steve M; Creamer, Jessica; Willis, Peter A

2018-02-01

Ocean worlds like Europa and Enceladus in the outer solar system are prime targets in the search for life beyond Earth. Enceladus is particularly interesting due to the presence of a water plume ejecting from the south polar region. The recent discovery of H 2 in the plume, in addition to the presence of previously observed organic compounds, highlights the possibility of life in this moon. The plume provides materials from the underlying ocean that could be collected simply by flying through it. The presence of the plume means that material from the ocean is available for collection during a flyby, without the need for landing or complex sample handling operations such as scooping or drilling. An attractive approach to preserve the organics in particles collected during flyby encounters would be to utilize silica aerogel, the material used to collect particles at hypervelocity during the Stardust mission. Here we demonstrate amino acids can be extracted from aerogel simply by adding water. This simple liquid extraction method could be implemented during a mission prior to analysis with a liquid-based technique like capillary electrophoresis. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The MVACS Robotic Arm Camera

NASA Astrophysics Data System (ADS)

Keller, H. U.; Hartwig, H.; Kramm, R.; Koschny, D.; Markiewicz, W. J.; Thomas, N.; Fernades, M.; Smith, P. H.; Reynolds, R.; Lemmon, M. T.; Weinberg, J.; Marcialis, R.; Tanner, R.; Boss, B. J.; Oquest, C.; Paige, D. A.

2001-08-01

The Robotic Arm Camera (RAC) is one of the key instruments newly developed for the Mars Volatiles and Climate Surveyor payload of the Mars Polar Lander. This lightweight instrument employs a front lens with variable focus range and takes images at distances from 11 mm (image scale 1:1) to infinity. Color images with a resolution of better than 50 μm can be obtained to characterize the Martian soil. Spectral information of nearby objects is retrieved through illumination with blue, green, and red lamp sets. The design and performance of the camera are described in relation to the science objectives and operation. The RAC uses the same CCD detector array as the Surface Stereo Imager and shares the readout electronics with this camera. The RAC is mounted at the wrist of the Robotic Arm and can characterize the contents of the scoop, the samples of soil fed to the Thermal Evolved Gas Analyzer, the Martian surface in the vicinity of the lander, and the interior of trenches dug out by the Robotic Arm. It can also be used to take panoramic images and to retrieve stereo information with an effective baseline surpassing that of the Surface Stereo Imager by about a factor of 3.

Phoenix Mars Lander with Solar Arrays Open

NASA Technical Reports Server (NTRS)

2006-01-01

NASA's next Mars-bound spacecraft, the Phoenix Mars Lander, was partway through assembly and testing at Lockheed Martin Space Systems, Denver, in September 2006, progressing toward an August 2007 launch from Florida. In this photograph, spacecraft specialists work on the lander after its fan-like circular solar arrays have been spread open for testing. The arrays will be in this configuration when the spacecraft is active on the surface of Mars.

Phoenix will land in icy soils near the north polar permanent ice cap of Mars and explore the history of the water in these soils and any associated rocks, while monitoring polar climate. It will dig into the surface, test scooped-up samples for carbon-bearing compounds and serve as NASA's first exploration of a potential modern habitat on Mars.

The Phoenix mission is led by Principal Investigator Peter H. Smith of the University of Arizona, Tucson, with project management at NASA's Jet Propulsion Laboratory and development partnership with Lockheed Martin Space Systems. International contributions for Phoenix are provided by the Canadian Space Agency, the University of Neuchatel (Switzerland), the University of Copenhagen, and the Max Planck Institute in Germany. JPL is a division of the California Institute of Technology in Pasadena.

Phoenix Mars Lander in Testing

NASA Technical Reports Server (NTRS)

2006-01-01

NASA's next Mars-bound spacecraft, the Phoenix Mars Lander, was partway through assembly and testing at Lockheed Martin Space Systems, Denver, in September 2006, progressing toward an August 2007 launch from Florida. In this photograph, spacecraft specialists work on the lander after its fan-like circular solar arrays have been spread open for testing. The arrays will be in this configuration when the spacecraft is active on the surface of Mars.

Phoenix will land in icy soils near the north polar permanent ice cap of Mars and explore the history of the water in these soils and any associated rocks, while monitoring polar climate. It will dig into the surface, test scooped-up samples for carbon-bearing compounds and serve as NASA's first exploration of a potential modern habitat on Mars.

[Ecology of Anopheles (Nyssorhynchus) darlingi Root in the installation area of a hydroelectric scheme on the border between the States of Mato Grosso do Sul and São Paulo].

PubMed

Gomes, Almério de Castro; Paula, Marcia Bicudo de; Natal, Delsio; Gotlieb, Sabina Lea Davidson

2010-01-01

Hydroelectric schemes modify the water flow and cause an impact on mosquito composition, thus justifying investigations. The aim of this study was to study anophelines in the area under the influence of a new lake and to evaluate their relative vulnerability to malaria. Anopheles specimens were collected from the edges of the Porto Primavera reservoir, during the phases of reservoir filling until its maximum level was reached. The techniques used were attraction to humans, Shannon traps and entomological scoops. The richness and diversity indexes were used to measure the impact. The temporal distribution analysis was performed using the Mann-Whitney test, taking the site, level and capture method as independent variables (alpha = 0.05). The density of Anopheles darlingi oscillated among the sites A, B and C, and the biggest peaks were located at B and C. After the lake reached its stable maximum level, there was a tendency for the density to decrease. It is suggested that the risk of autochthonous malaria in the vicinity of the lake remained unchanged, but it is necessary to remain alert regarding sporadic human infections.

Evidence for indigenous nitrogen in sedimentary and aeolian deposits from the Curiosity rover investigations at Gale crater, Mars

PubMed Central

Stern, Jennifer C.; Sutter, Brad; Freissinet, Caroline; Navarro-González, Rafael; McKay, Christopher P.; Archer, P. Douglas; Buch, Arnaud; Brunner, Anna E.; Coll, Patrice; Eigenbrode, Jennifer L.; Fairen, Alberto G.; Franz, Heather B.; Glavin, Daniel P.; Kashyap, Srishti; McAdam, Amy C.; Ming, Douglas W.; Steele, Andrew; Szopa, Cyril; Wray, James J.; Martín-Torres, F. Javier; Zorzano, Maria-Paz; Conrad, Pamela G.; Mahaffy, Paul R.; Kemppinen, Osku; Bridges, Nathan; Johnson, Jeffrey R.; Minitti, Michelle; Cremers, David; Bell, James F.; Edgar, Lauren; Farmer, Jack; Godber, Austin; Wadhwa, Meenakshi; Wellington, Danika; McEwan, Ian; Newman, Claire; Richardson, Mark; Charpentier, Antoine; Peret, Laurent; King, Penelope; Blank, Jennifer; Weigle, Gerald; Schmidt, Mariek; Li, Shuai; Milliken, Ralph; Robertson, Kevin; Sun, Vivian; Baker, Michael; Edwards, Christopher; Ehlmann, Bethany; Farley, Kenneth; Griffes, Jennifer; Grotzinger, John; Miller, Hayden; Newcombe, Megan; Pilorget, Cedric; Rice, Melissa; Siebach, Kirsten; Stack, Katie; Stolper, Edward; Brunet, Claude; Hipkin, Victoria; Léveillé, Richard; Marchand, Geneviève; Sánchez, Pablo Sobrón; Favot, Laurent; Cody, George; Steele, Andrew; Flückiger, Lorenzo; Lees, David; Nefian, Ara; Martin, Mildred; Gailhanou, Marc; Westall, Frances; Israël, Guy; Agard, Christophe; Baroukh, Julien; Donny, Christophe; Gaboriaud, Alain; Guillemot, Philippe; Lafaille, Vivian; Lorigny, Eric; Paillet, Alexis; Pérez, René; Saccoccio, Muriel; Yana, Charles; Armiens-Aparicio, Carlos; Rodríguez, Javier Caride; Blázquez, Isaías Carrasco; Gómez, Felipe Gómez; Gómez-Elvira, Javier; Hettrich, Sebastian; Malvitte, Alain Lepinette; Jiménez, Mercedes Marín; Martínez-Frías, Jesús; Martín-Soler, Javier; - Torres, F. Javier Martín; Jurado, Antonio Molina; Mora-Sotomayor, Luis; Caro, Guillermo Muñoz; López, Sara Navarro; Peinado-González, Verónica; Pla-García, Jorge; Manfredi, José Antonio Rodriguez; Romeral-Planelló, Julio José; Fuentes, Sara Alejandra Sans; Martinez, Eduardo Sebastian; Redondo, Josefina Torres; Urqui-O'Callaghan, Roser; Mier, María-Paz Zorzano; Chipera, Steve; Lacour, Jean-Luc; Mauchien, Patrick; Sirven, Jean-Baptiste; Manning, Heidi; Fairén, Alberto; Hayes, Alexander; Joseph, Jonathan; Squyres, Steven; Sullivan, Robert; Thomas, Peter; Dupont, Audrey; Lundberg, Angela; Melikechi, Noureddine; Mezzacappa, Alissa; DeMarines, Julia; Grinspoon, David; Reitz, Günther; Prats, Benito; Atlaskin, Evgeny; Genzer, Maria; Harri, Ari-Matti; Haukka, Harri; Kahanpää, Henrik; Kauhanen, Janne; Kemppinen, Osku; Paton, Mark; Polkko, Jouni; Schmidt, Walter; Siili, Tero; Fabre, Cécile; Wray, James; Wilhelm, Mary Beth; Poitrasson, Franck; Patel, Kiran; Gorevan, Stephen; Indyk, Stephen; Paulsen, Gale; Gupta, Sanjeev; Bish, David; Schieber, Juergen; Gondet, Brigitte; Langevin, Yves; Geffroy, Claude; Baratoux, David; Berger, Gilles; Cros, Alain; d’Uston, Claude; Forni, Olivier; Gasnault, Olivier; Lasue, Jérémie; Lee, Qiu-Mei; Maurice, Sylvestre; Meslin, Pierre-Yves; Pallier, Etienne; Parot, Yann; Pinet, Patrick; Schröder, Susanne; Toplis, Mike; Lewin, Éric; Brunner, Will; Heydari, Ezat; Achilles, Cherie; Oehler, Dorothy; Sutter, Brad; Cabane, Michel; Coscia, David; Israël, Guy; Szopa, Cyril; Dromart, Gilles; Robert, François; Sautter, Violaine; Le Mouélic, Stéphane; Mangold, Nicolas; Nachon, Marion; Buch, Arnaud; Stalport, Fabien; Coll, Patrice; François, Pascaline; Raulin, François; Teinturier, Samuel; Cameron, James; Clegg, Sam; Cousin, Agnès; DeLapp, Dorothea; Dingler, Robert; Jackson, Ryan Steele; Johnstone, Stephen; Lanza, Nina; Little, Cynthia; Nelson, Tony; Wiens, Roger C.; Williams, Richard B.; Jones, Andrea; Kirkland, Laurel; Treiman, Allan; Baker, Burt; Cantor, Bruce; Caplinger, Michael; Davis, Scott; Duston, Brian; Edgett, Kenneth; Fay, Donald; Hardgrove, Craig; Harker, David; Herrera, Paul; Jensen, Elsa; Kennedy, Megan R.; Krezoski, Gillian; Krysak, Daniel; Lipkaman, Leslie; Malin, Michael; McCartney, Elaina; McNair, Sean; Nixon, Brian; Posiolova, Liliya; Ravine, Michael; Salamon, Andrew; Saper, Lee; Stoiber, Kevin; Supulver, Kimberley; Van Beek, Jason; Van Beek, Tessa; Zimdar, Robert; French, Katherine Louise; Iagnemma, Karl; Miller, Kristen; Summons, Roger; Goesmann, Fred; Goetz, Walter; Hviid, Stubbe; Johnson, Micah; Lefavor, Matthew; Lyness, Eric; Breves, Elly; Dyar, M. Darby; Fassett, Caleb; Blake, David F.; Bristow, Thomas; DesMarais, David; Edwards, Laurence; Haberle, Robert; Hoehler, Tori; Hollingsworth, Jeff; Kahre, Melinda; Keely, Leslie; McKay, Christopher; Wilhelm, Mary Beth; Bleacher, Lora; Brinckerhoff, William; Choi, David; Conrad, Pamela; Dworkin, Jason P.; Eigenbrode, Jennifer; Floyd, Melissa; Freissinet, Caroline; Garvin, James; Glavin, Daniel; Harpold, Daniel; Jones, Andrea; Mahaffy, Paul; Martin, David K.; McAdam, Amy; Pavlov, Alexander; Raaen, Eric; Smith, Michael D.; Stern, Jennifer; Tan, Florence; Trainer, Melissa; Meyer, Michael; Posner, Arik; Voytek, Mary; Anderson, Robert C; Aubrey, Andrew; Beegle, Luther W.; Behar, Alberto; Blaney, Diana; Brinza, David; Calef, Fred; Christensen, Lance; Crisp, Joy A.; DeFlores, Lauren; Ehlmann, Bethany; Feldman, Jason; Feldman, Sabrina; Flesch, Gregory; Hurowitz, Joel; Jun, Insoo; Keymeulen, Didier; Maki, Justin; Mischna, Michael; Morookian, John Michael; Parker, Timothy; Pavri, Betina; Schoppers, Marcel; Sengstacken, Aaron; Simmonds, John J.; Spanovich, Nicole; Juarez, Manuel de la Torre; Vasavada, Ashwin R.; Webster, Christopher R.; Yen, Albert; Archer, Paul Douglas; Cucinotta, Francis; Jones, John H.; Ming, Douglas; Morris, Richard V.; Niles, Paul; Rampe, Elizabeth; Nolan, Thomas; Fisk, Martin; Radziemski, Leon; Barraclough, Bruce; Bender, Steve; Berman, Daniel; Dobrea, Eldar Noe; Tokar, Robert; Vaniman, David; Williams, Rebecca M. E.; Yingst, Aileen; Lewis, Kevin; Leshin, Laurie; Cleghorn, Timothy; Huntress, Wesley; Manhès, Gérard; Hudgins, Judy; Olson, Timothy; Stewart, Noel; Sarrazin, Philippe; Grant, John; Vicenzi, Edward; Wilson, Sharon A.; Bullock, Mark; Ehresmann, Bent; Hamilton, Victoria; Hassler, Donald; Peterson, Joseph; Rafkin, Scot; Zeitlin, Cary; Fedosov, Fedor; Golovin, Dmitry; Karpushkina, Natalya; Kozyrev, Alexander; Litvak, Maxim; Malakhov, Alexey; Mitrofanov, Igor; Mokrousov, Maxim; Nikiforov, Sergey; Prokhorov, Vasily; Sanin, Anton; Tretyakov, Vladislav; Varenikov, Alexey; Vostrukhin, Andrey; Kuzmin, Ruslan; Clark, Benton; Wolff, Michael; McLennan, Scott; Botta, Oliver; Drake, Darrell; Bean, Keri; Lemmon, Mark; Schwenzer, Susanne P.; Anderson, Ryan B.; Herkenhoff, Kenneth; Lee, Ella Mae; Sucharski, Robert; Hernández, Miguel Ángel de Pablo; Ávalos, Juan José Blanco; Ramos, Miguel; Kim, Myung-Hee; Malespin, Charles; Plante, Ianik; Muller, Jan-Peter; Navarro-González, Rafael; Ewing, Ryan; Boynton, William; Downs, Robert; Fitzgibbon, Mike; Harshman, Karl; Morrison, Shaunna; Dietrich, William; Kortmann, Onno; Palucis, Marisa; Sumner, Dawn Y.; Williams, Amy; Lugmair, Günter; Wilson, Michael A.; Rubin, David; Jakosky, Bruce; Balic-Zunic, Tonci; Frydenvang, Jens; Jensen, Jaqueline Kløvgaard; Kinch, Kjartan; Koefoed, Asmus; Madsen, Morten Bo; Stipp, Susan Louise Svane; Boyd, Nick; Campbell, John L.; Gellert, Ralf; Perrett, Glynis; Pradler, Irina; VanBommel, Scott; Jacob, Samantha; Owen, Tobias; Rowland, Scott; Atlaskin, Evgeny; Savijärvi, Hannu; Boehm, Eckart; Böttcher, Stephan; Burmeister, Sönke; Guo, Jingnan; Köhler, Jan; García, César Martín; Mueller-Mellin, Reinhold; Wimmer-Schweingruber, Robert; Bridges, John C.; McConnochie, Timothy; Benna, Mehdi; Franz, Heather; Bower, Hannah; Brunner, Anna; Blau, Hannah; Boucher, Thomas; Carmosino, Marco; Atreya, Sushil; Elliott, Harvey; Halleaux, Douglas; Rennó, Nilton; Wong, Michael; Pepin, Robert; Elliott, Beverley; Spray, John; Thompson, Lucy; Gordon, Suzanne; Newsom, Horton; Ollila, Ann; Williams, Joshua; Vasconcelos, Paulo; Bentz, Jennifer; Nealson, Kenneth; Popa, Radu; Kah, Linda C.; Moersch, Jeffrey; Tate, Christopher; Day, Mackenzie; Kocurek, Gary; Hallet, Bernard; Sletten, Ronald; Francis, Raymond; McCullough, Emily; Cloutis, Ed; ten Kate, Inge Loes; Kuzmin, Ruslan; Arvidson, Raymond; Fraeman, Abigail; Scholes, Daniel; Slavney, Susan; Stein, Thomas; Ward, Jennifer; Berger, Jeffrey; Moores, John E.

2015-01-01

The Sample Analysis at Mars (SAM) investigation on the Mars Science Laboratory (MSL) Curiosity rover has detected oxidized nitrogen-bearing compounds during pyrolysis of scooped aeolian sediments and drilled sedimentary deposits within Gale crater. Total N concentrations ranged from 20 to 250 nmol N per sample. After subtraction of known N sources in SAM, our results support the equivalent of 110–300 ppm of nitrate in the Rocknest (RN) aeolian samples, and 70–260 and 330–1,100 ppm nitrate in John Klein (JK) and Cumberland (CB) mudstone deposits, respectively. Discovery of indigenous martian nitrogen in Mars surface materials has important implications for habitability and, specifically, for the potential evolution of a nitrogen cycle at some point in martian history. The detection of nitrate in both wind-drifted fines (RN) and in mudstone (JK, CB) is likely a result of N2 fixation to nitrate generated by thermal shock from impact or volcanic plume lightning on ancient Mars. Fixed nitrogen could have facilitated the development of a primitive nitrogen cycle on the surface of ancient Mars, potentially providing a biochemically accessible source of nitrogen. PMID:25831544

First X-Ray Diffraction Results from Mars Science Laboratory: Mineralogy of Rocknest Aeolian Bedform at Gale Crater

NASA Technical Reports Server (NTRS)

Bish, D. L.; Blake, D. F.; Vaniman, D. T.; Chipera, S. J.; Sarrazin, P.; Morris, R. V.; Ming, D. W.; Treiman, A. H.; Downs, R. T.; Morrison, S. M.;

Evidence for indigenous nitrogen in sedimentary and aeolian deposits from the Curiosity rover investigations at Gale crater, Mars.

PubMed

Stern, Jennifer C; Sutter, Brad; Freissinet, Caroline; Navarro-González, Rafael; McKay, Christopher P; Archer, P Douglas; Buch, Arnaud; Brunner, Anna E; Coll, Patrice; Eigenbrode, Jennifer L; Fairen, Alberto G; Franz, Heather B; Glavin, Daniel P; Kashyap, Srishti; McAdam, Amy C; Ming, Douglas W; Steele, Andrew; Szopa, Cyril; Wray, James J; Martín-Torres, F Javier; Zorzano, Maria-Paz; Conrad, Pamela G; Mahaffy, Paul R

2015-04-07

The Sample Analysis at Mars (SAM) investigation on the Mars Science Laboratory (MSL) Curiosity rover has detected oxidized nitrogen-bearing compounds during pyrolysis of scooped aeolian sediments and drilled sedimentary deposits within Gale crater. Total N concentrations ranged from 20 to 250 nmol N per sample. After subtraction of known N sources in SAM, our results support the equivalent of 110-300 ppm of nitrate in the Rocknest (RN) aeolian samples, and 70-260 and 330-1,100 ppm nitrate in John Klein (JK) and Cumberland (CB) mudstone deposits, respectively. Discovery of indigenous martian nitrogen in Mars surface materials has important implications for habitability and, specifically, for the potential evolution of a nitrogen cycle at some point in martian history. The detection of nitrate in both wind-drifted fines (RN) and in mudstone (JK, CB) is likely a result of N2 fixation to nitrate generated by thermal shock from impact or volcanic plume lightning on ancient Mars. Fixed nitrogen could have facilitated the development of a primitive nitrogen cycle on the surface of ancient Mars, potentially providing a biochemically accessible source of nitrogen.

Early Testing in the Icing Research Tunnel

NASA Image and Video Library

1944-09-21

National Advisory Committee for Aeronautics (NACA) design engineers added the Icing Research Tunnel to the new Aircraft Engine Research Laboratory’s original layout to take advantage of the massive refrigeration system being constructed for the Altitude Wind Tunnel. The Icing Research Tunnel was built to study the formation of ice on aircraft surfaces and methods of preventing or eradicating that ice. Ice buildup adds extra weight, effects aerodynamics, and sometimes blocks airflow through engines. The Icing Research Tunnel is a closed-loop atmospheric wind tunnel with a 6- by 9-foot test section. The tunnel can produce speeds up to 300 miles per hour and temperatures from about 30 to –45⁰ F. Initially the tunnel used a spray bar system to introduce moisture into the airstream. NACA engineers struggled for nearly 10 years to perfect the spray system. The Icing Research Tunnel began testing in June of 1944. Initial testing, seen in this photograph, studied ice accumulation on propellers of a military aircraft. NACA reserach also produced a protected air scoop for the C–46 transport aircraft. A large number of C–46 aircraft were lost due to icing while flying supply runs over the Himalayas during World War II.

[Oral health in the printed media: analysis of newspaper articles in the years 2004-2009].

PubMed

Cavaca, Aline Guio; Gentilli, Victor; Zandonade, Eliana; Cortellete Júnior, Moacyr; Emmerich, Adauto

2012-05-01

This study seeks to outline the main characteristics of the texts on oral health that appeared in the printed media in the State of Espírito Santo from 2004 to 2009, in order to analyze and compare the issues, approaches and journalistic relevance related to the theme prioritized in A Tribuna and A Gazeta newspapers. Exploratory documentary research was conducted, based on quantitative content analysis of the material, which established that the issues included ranged from information about oral health policies, community service and prevention of oral health diseases, to the "aesthetic tendencies" of the smile. It also covered the dissemination of new technologies and dental specialties and there was a predominance of even-numbered pages, fewer first page texts and full-page coverage. This implies a moderate appreciation of these issues, different editorial projects, plus the difference in target audience that determined the journalistic standard and the predominance of specialized sources. Despite the oral health articles not revealing journalistic "scoops", they can be reworked using conscious journalistic techniques, in order to elicit the extraordinary from the ordinary, giving rise to texts of social relevance in both newspapers.

Investigation of Engine Oil-cooling Problem during Idle Conditions on Pusher Type Turbo Prop Aircraft

NASA Astrophysics Data System (ADS)

Premkumar, P. S.; Chakravarthy, S. Bhaskar; Jayagopal, S.; Radhakrishnan, P.; Pillai, S. Nadaraja; Senthil Kumar, C.

2017-11-01

Aircraft engines need a cooling system to keep the engine oil well within the temperature limits for continuous operation. The aircraft selected for this study is a typical pusher type Light Transport Aircraft (LTA) having twin turbo prop engines mounted at the aft end of the fuselage. Due to the pusher propeller configuration, effective oil cooling is a critical issue, especially during low-speed ground operations like engine idling and also in taxiing and initial climb. However, the possibility of utilizing the inflow induced by the propeller for oil cooling is the subject matter of investigation in this work. The oil cooler duct was designed to accommodate the required mass flow, estimated using the oil cooler performance graph. A series of experiments were carried out with and without oil cooler duct attached to the nacelle, in order to investigate the mass flow induced by the propeller and its adequacy to cool the engine oil. Experimental results show that the oil cooler positioned at roughly 25 % of the propeller radius from the nacelle center line leads to adequate cooling, without incorporating additional means. Furthermore, it is suggested to install a NACA scoop to minimize spillage drag by increasing pressure recovery.

Phoenix Checks out its Work Area

NASA Technical Reports Server (NTRS)

2008-01-01

[figure removed for brevity, see original site] Click on image for animation

This animation shows a mosaic of images of the workspace reachable by the scoop on the robotic arm of NASA's Phoenix Mars Lander, along with some measurements of rock sizes.

Phoenix was able to determine the size of the rocks based on three-dimensional views from stereoscopic images taken by the lander's 7-foot mast camera, called the Surface Stereo Imager. The stereo pair of images enable depth perception, much the way a pair of human eyes enable people to gauge the distance to nearby objects.

The rock measurements were made by a visualization tool known as Viz, developed at NASA's Ames Research Laboratory. The shadow cast by the camera on the Martian surface appears somewhat disjointed because the camera took the images in the mosaic at different times of day.

Scientists do not yet know the origin or composition of the flat, light-colored rocks on the surface in front of the lander.

The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

NACA Groundbreaking Ceremony

NASA Technical Reports Server (NTRS)

1953-01-01

The NACA High-Speed Flight Research Station, had initially been subordinate to the Langley Memorial Aeronautical Laboratory near Hampton, Virginia, but as the flight research in the Mojave Desert increasingly proved its worth after 1946, it made sense to make the Flight Research Station a separate entity reporting directly to the headquarters of the National Advisory Committee for Aeronautics. But an autonomous center required all the trappings of a major research facility, including good quarters. With the adoption of the Edwards 'Master Plan,' the Air Force had committed itself to moving from its old South Base to a new location midway between the South and North Bases. The NACA would have to move also--so why not take advantage of the situation and move into a full-blown research facility. The Air Force issued a lease to NACA for a location on the northwestern shore of the Roger Dry Lake. Construction started on the NACA station in early February 1953. On a windy day, January 27, 1953, at a groundbreaking ceremony stood left to right: Gerald Truszynski, Head of Instrumentation Division; Joseph Vensel, Head of the Operations Branch; Walter Williams, Head of the Station, scooping the first shovel full of dirt; Marion Kent, Head of Personnel; and California state official Arthur Samet.

Pelopscreadium aegyptense n. gen., n. sp. and Pelopscreadium spongiosum (Bray & Cribb, 1998) n. comb., (Digenea: Lepocreadiidae), each from disjunct populations of the Yellow boxfish, Ostracion cubicus Linnaeus (Ostraciidae).

PubMed

Dronen, Norman O; Blend, Charles K; Khalifa, Refaat M A; Mohamadain, Hoda S; Karar, Yasser F M

2016-06-24

Bianium spongiosum Bray & Cribb, 1998 (Lepocreadiidae), described from the yellow boxfish, Ostracion cubicus Linnaeus (Ostraciidae), off Lizard Island, Queensland, Australia, possesses a combination of the following three morphological features which distinguishes it from all the other species currently assigned to the genus: (1) large internal patches of large cells forming sponge-like pads we have termed "pelops"("pelop" sing.) laterally in the forebody extending from near the anterior extremity to about the level of the intestinal bifurcation rather than possessing a scoop; (2) ceca that reach to near the posterior extremity where they end blindly without ani; and (3) a vitellarium which is present laterally but not dorsal to the ceca. Based on this we propose the erection of Pelopscreadium n. gen. (Lepocreadiidae) with the assignment of B. spongiosum to this new genus as the type-species, Pelopscreadium spongiosum (Bray & Cribb, 1998) n. comb. Pelopscreadium aegyptense n. sp., also from the yellow boxfish but from the Red Sea off Sharm El-Naga, Egypt, is described as the second member of the new genus because it shares these three characteristics with P. spongiosum.

Universe Awareness: a global educational programme

NASA Astrophysics Data System (ADS)

Sankatsing Nava, Tibisay; Russo, Pedro

2015-08-01

Universe Awareness (UNAWE) is a global astronomy education programme that uses the beauty and grandeur of the Universe to encourage young children, particularly those from an underprivileged background, to have an interest in science and technology and foster their sense of global citizenship from an early age.UNAWE’s activities consist of four main components:- Coordinating an international network comprised of more than 1000 astronomers, teachers and educators in more than 60 countries- Developing and distributing educational resources such as the inflatable UNAWE Earthball, the Universe-in-a Box educational kit and Space Scoop, the astronomy news service for children.- Providing training activities for teachers and other educators of young children around the world- Providing resources for the evaluation of educational activitiesBetween 2011 and 2013, the European branch of UNAWE, EU-UNAWE, was funded by the European Commission to implement a project in 5 EU countries and South Africa. This project has been concluded successfully. The global project of Universe Awareness coordinated by Leiden University has continued to grow since, with an expanding international network, new educational resources and teacher trainings and an International Workshop in collaboration with ESA in October 2015, among other activities.

Factors associated with ruminal pH at herd level.

PubMed

Geishauser, T; Linhart, N; Neidl, A; Reimann, A

2012-08-01

The objective of this study was to evaluate factors associated with ruminal pH at herd level. Four hundred and thirty-two cows of a Thuringian dairy herd were sampled before claw trimming using a rumen fluid scoop. Volume and pH of the rumen sample were measured, and lactation number, percentage of concentrates in the ration, days in milk (DIM), time of day, and daily milk yield were recorded. Rumen sampling was successful in 99.8% of the cows. The average sample volume was 25 mL. Rumen sample pH decreased with increasing percentage of concentrates in the ration. Ruminal pH decreased from calving to 77 DIM, and grew subsequently to 330 DIM. During the day, rumen pH followed a sinus curve, with maxima in the morning (0915 h) and afternoon (1533 h), and a minimum around noon (1227 h). Ruminal pH decreased with increasing daily milk yield. Lactation number interacted with daily milk yield on rumen pH. The percentage of concentrates in the ration, DIM, time of day, and daily milk yield were significant factors affecting ruminal pH at the herd level. Copyright © 2012 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

A Basic Robotic Excavator (the Glenn Digger): Description, Design, and Initial Operation

NASA Technical Reports Server (NTRS)

Bauman, Steve; Newman, Paul; Izadnegahdar, Alain; Johnson, Kyle; Abel, Phillip

2016-01-01

This paper describes the design, commercial part selections, fabrication, assembly, installation, and initial operation of a two degree of freedom robotic excavator. Colloquially referred to as "the NASA Glenn Digger," it was designed specifically to be mounted onto, and to operate with, the then newly developed Centaur 2 robotic mobility base. The excavator, when mounted to Centaur 2, is designed to scoop loose regolith from the terrain, raise its loaded bucket up and dump the load into a hopper of at least a 1-m-height. The hopper represents the input to a machine that would process the raw material, such as to produce oxygen from lunar regolith as would be required for long-term lunar habitation. This equipment debuted at the annual Research and Technology Studies ("Desert RATS", Ref. 1) event held north of Flagstaff, Arizona, in September of 2010, when the Digger was successfully joined to Centaur 2 and the shoveling articulation was demonstrated. During 2011, the hardware was modified for added strength, strain gauges were added to measure loads, and the controls were improved in preparation for the 2011 Desert RATS event, where additional "field operations" experience was gained.

Exposure to Animal Feces and Human Health: A Systematic Review and Proposed Research Priorities

PubMed Central

2017-01-01

Humans can be exposed to pathogens from poorly managed animal feces, particularly in communities where animals live in close proximity to humans. This systematic review of peer-reviewed and gray literature examines the human health impacts of exposure to poorly managed animal feces transmitted via water, sanitation, and hygiene (WASH)-related pathways in low- and middle-income countries, where household livestock, small-scale animal operations, and free-roaming animals are common. We identify routes of contamination by animal feces, control measures to reduce human exposure, and propose research priorities for further inquiry. Exposure to animal feces has been associated with diarrhea, soil-transmitted helminth infection, trachoma, environmental enteric dysfunction, and growth faltering. Few studies have evaluated control measures, but interventions include reducing cohabitation with animals, provision of animal feces scoops, controlling animal movement, creating safe child spaces, improving veterinary care, and hygiene promotion. Future research should evaluate: behaviors related to points of contact with animal feces; animal fecal contamination of food; cultural behaviors of animal fecal management; acute and chronic health risks associated with exposure to animal feces; and factors influencing concentrations and shedding rates of pathogens originating from animal feces. PMID:28926696

Tool for Sampling Permafrost on a Remote Planet

NASA Technical Reports Server (NTRS)

Peters, Gregory

2006-01-01

A report discusses the robotic arm tool for rapidly acquiring permafrost (RATRAP), which is being developed for acquiring samples of permafrost on Mars or another remote planet and immediately delivering the samples to adjacent instruments for analysis. The prototype RATRAP includes a rasp that protrudes through a hole in the bottom of a container that is placed in contact with the permafrost surface. Moving at high speed, the rasp cuts into the surface and loads many of the resulting small particles of permafrost through the hole into the container. The prototype RATRAP has been shown to be capable of acquiring many grams of permafrost simulants in times of the order of seconds. In contrast, a current permafrost sampling system that the RATRAP is intended to supplant works by scraping with tines followed by picking up the scrapings in a scoop, sometimes taking hours to acquire a few grams. Also, because the RATRAP inherently pulverizes the sampled material, it is an attractive alternative to other sampling apparatuses that generate core or chunk samples that must be further processed by a crushing apparatus to make the sample particles small enough for analysis by some instruments.

MLIBlast: A program to empirically predict hypervelocity impact damage to the Space Station

NASA Technical Reports Server (NTRS)

Rule, William K.

1991-01-01

MLIBlast is described, which consists of a number of DOC PC based MIcrosoft BASIC program modules written to provide spacecraft designers with empirical predictions of space debris damage to orbiting spacecraft. The Spacecraft wall configuration is assumed to consist of multilayer insulation (MLI) placed between a Whipple style bumper and a pressure wall. Predictions are based on data sets of experimental results obtained from simulating debris impact on spacecraft. One module of MLIBlast facilitates creation of the data base of experimental results that is used by the damage prediction modules of the code. The user has a choice of three different prediction modules to predict damage to the bumper, the MLI, and the pressure wall.

Toward automated biochemotype annotation for large compound libraries.

PubMed

Chen, Xian; Liang, Yizeng; Xu, Jun

2006-08-01

Combinatorial chemistry allows scientists to probe large synthetically accessible chemical space. However, identifying the sub-space which is selectively associated with an interested biological target, is crucial to drug discovery and life sciences. This paper describes a process to automatically annotate biochemotypes of compounds in a library and thus to identify bioactivity related chemotypes (biochemotypes) from a large library of compounds. The process consists of two steps: (1) predicting all possible bioactivities for each compound in a library, and (2) deriving possible biochemotypes based on predictions. The Prediction of Activity Spectra for Substances program (PASS) was used in the first step. In second step, structural similarity and scaffold-hopping technologies are employed. These technologies are used to derive biochemotypes from bioactivity predictions and the corresponding annotated biochemotypes from MDL Drug Data Report (MDDR) database. About a one million (982,889) commercially available compound library (CACL) has been tested using this process. This paper demonstrates the feasibility of automatically annotating biochemotypes for large libraries of compounds. Nevertheless, some issues need to be considered in order to improve the process. First, the prediction accuracy of PASS program has no significant correlation with the number of compounds in a training set. Larger training sets do not necessarily increase the maximal error of prediction (MEP), nor do they increase the hit structural diversity. Smaller training sets do not necessarily decrease MEP, nor do they decrease the hit structural diversity. Second, the success of systematic bioactivity prediction relies on modeling, training data, and the definition of bioactivities (biochemotype ontology). Unfortunately, the biochemotype ontology was not well developed in the PASS program. Consequently, "ill-defined" bioactivities can reduce the quality of predictions. This paper suggests the ways in which the systematic bioactivities prediction program should be improved.

Enhanced sensitivity of CpG island search and primer design based on predicted CpG island position.

PubMed

Park, Hyun-Chul; Ahn, Eu-Ree; Jung, Ju Yeon; Park, Ji-Hye; Lee, Jee Won; Lim, Si-Keun; Kim, Won

2018-05-01

DNA methylation has important biological roles, such as gene expression regulation, as well as practical applications in forensics, such as in body fluid identification and age estimation. DNA methylation often occurs in the CpG site, and methylation within the CpG islands affects various cellular functions and is related to tissue-specific identification. Several programs have been developed to identify CpG islands; however, the size, location, and number of predicted CpG islands are not identical due to different search algorithms. In addition, they only provide structural information for predicted CpG islands without experimental information, such as primer design. We developed an analysis pipeline package, CpGPNP, to integrate CpG island prediction and primer design. CpGPNP predicts CpG islands more accurately and sensitively than other programs, and designs primers easily based on the predicted CpG island locations. The primer design function included standard, bisulfite, and methylation-specific PCR to identify the methylation of particular CpG sites. In this study, we performed CpG island prediction on all chromosomes and compared CpG island search performance of CpGPNP with other CpG island prediction programs. In addition, we compared the position of primers designed for a specific region within the predicted CpG island using other bisulfite PCR primer programs. The primers designed by CpGPNP were used to experimentally verify the amplification of the target region of markers for body fluid identification and age estimation. CpGPNP is freely available at http://forensicdna.kr/cpgpnp/. Copyright © 2018 Elsevier B.V. All rights reserved.

[ProteoСat: a tool for planning of proteomic experiments].

PubMed

Skvortsov, V S; Alekseychuk, N N; Khudyakov, D V; Mikurova, A V; Rybina, A V; Novikova, S E; Tikhonova, O V

2015-01-01

ProteoCat is a computer program has been designed to help researchers in the planning of large-scale proteomic experiments. The central part of this program is the subprogram of hydrolysis simulation that supports 4 proteases (trypsin, lysine C, endoproteinases AspN and GluC). For the peptides obtained after virtual hydrolysis or loaded from data file a number of properties important in mass-spectrometric experiments can be calculated or predicted. The data can be analyzed or filtered to reduce a set of peptides. The program is using new and improved modification of our methods developed to predict pI and probability of peptide detection; pI can also be predicted for a number of popular pKa's scales, proposed by other investigators. The algorithm for prediction of peptide retention time was realized similar to the algorithm used in the program SSRCalc. ProteoCat can estimate the coverage of amino acid sequences of proteins under defined limitation on peptides detection, as well as the possibility of assembly of peptide fragments with user-defined size of "sticky" ends. The program has a graphical user interface, written on JAVA and available at http://www.ibmc.msk.ru/LPCIT/ProteoCat.

Protein domain analysis of genomic sequence data reveals regulation of LRR related domains in plant transpiration in Ficus.

PubMed

Lang, Tiange; Yin, Kangquan; Liu, Jinyu; Cao, Kunfang; Cannon, Charles H; Du, Fang K

2014-01-01

Predicting protein domains is essential for understanding a protein's function at the molecular level. However, up till now, there has been no direct and straightforward method for predicting protein domains in species without a reference genome sequence. In this study, we developed a functionality with a set of programs that can predict protein domains directly from genomic sequence data without a reference genome. Using whole genome sequence data, the programming functionality mainly comprised DNA assembly in combination with next-generation sequencing (NGS) assembly methods and traditional methods, peptide prediction and protein domain prediction. The proposed new functionality avoids problems associated with de novo assembly due to micro reads and small single repeats. Furthermore, we applied our functionality for the prediction of leucine rich repeat (LRR) domains in four species of Ficus with no reference genome, based on NGS genomic data. We found that the LRRNT_2 and LRR_8 domains are related to plant transpiration efficiency, as indicated by the stomata index, in the four species of Ficus. The programming functionality established in this study provides new insights for protein domain prediction, which is particularly timely in the current age of NGS data expansion.

The NASA aircraft noise prediction program improved propeller analysis system

NASA Technical Reports Server (NTRS)

Nguyen, L. Cathy

1991-01-01

The improvements and the modifications of the NASA Aircraft Noise Prediction Program (ANOPP) and the Propeller Analysis System (PAS) are described. Comparisons of the predictions and the test data are included in the case studies for the flat plate model in the Boundary Layer Module, for the effects of applying compressibility corrections to the lift and pressure coefficients, for the use of different weight factors in the Propeller Performance Module, for the use of the improved retarded time equation solution, and for the effect of the number grids in the Transonic Propeller Noise Module. The DNW tunnel test data of a propeller at different angles of attack and the Dowty Rotol data are compared with ANOPP predictions. The effect of the number of grids on the Transonic Propeller Noise Module predictions and the comparison of ANOPP TPN and DFP-ATP codes are studied. In addition to the above impact studies, the transonic propeller noise predictions for the SR-7, the UDF front rotor, and the support of the enroute noise test program are included.

Improving Prediction Accuracy of “Central Line-Associated Blood Stream Infections” Using Data Mining Models

PubMed Central

Noaman, Amin Y.; Jamjoom, Arwa; Al-Abdullah, Nabeela; Nasir, Mahreen; Ali, Anser G.

2017-01-01

Prediction of nosocomial infections among patients is an important part of clinical surveillance programs to enable the related personnel to take preventive actions in advance. Designing a clinical surveillance program with capability of predicting nosocomial infections is a challenging task due to several reasons, including high dimensionality of medical data, heterogenous data representation, and special knowledge required to extract patterns for prediction. In this paper, we present details of six data mining methods implemented using cross industry standard process for data mining to predict central line-associated blood stream infections. For our study, we selected datasets of healthcare-associated infections from US National Healthcare Safety Network and consumer survey data from Hospital Consumer Assessment of Healthcare Providers and Systems. Our experiments show that central line-associated blood stream infections (CLABSIs) can be successfully predicted using AdaBoost method with an accuracy up to 89.7%. This will help in implementing effective clinical surveillance programs for infection control, as well as improving the accuracy detection of CLABSIs. Also, this reduces patients' hospital stay cost and maintains patients' safety. PMID:29085836

Microbial burden prediction model for unmanned planetary spacecraft

NASA Technical Reports Server (NTRS)

Hoffman, A. R.; Winterburn, D. A.

1972-01-01

The technical development of a computer program for predicting microbial burden on unmanned planetary spacecraft is outlined. The discussion includes the derivation of the basic analytical equations, the selection of a method for handling several random variables, the macrologic of the computer programs and the validation and verification of the model. The prediction model was developed to (1) supplement the biological assays of a spacecraft by simulating the microbial accretion during periods when assays are not taken; (2) minimize the necessity for a large number of microbiological assays; and (3) predict the microbial loading on a lander immediately prior to sterilization and other non-lander equipment prior to launch. It is shown that these purposes not only were achieved but also that the prediction results compare favorably to the estimates derived from the direct assays. The computer program can be applied not only as a prediction instrument but also as a management and control tool. The basic logic of the model is shown to have possible applicability to other sequential flow processes, such as food processing.

Predicting Noise From Wind Turbines

NASA Technical Reports Server (NTRS)

Grosveld, Ferdinand W.

1990-01-01

Computer program WINDY predicts broadband noise spectra of horizontal-axis wind-turbine generators. Enables adequate assessment of impact of broadband wind-turbine noise. Effects of turbulence, trailing-edge wakes, and bluntness taken into account. Program has practical application in design and siting of wind-turbine machines acceptable to community. Written in GW-Basic.

NASA's Software Bank (Heath Tecna Aerospace)

NASA Technical Reports Server (NTRS)

1991-01-01

Heath Tecna Aerospace used a COSMIC program, "Analysis of Filament Reinforced Metal Shell Pressure Vessels," to predict stresses in motorcase walls in a composite hybrid rocket and calculate the ideal geometry for the domes at either end of the filament-wound pressure vessel. The COSMIC program predictions were confirmed in testing.

Study of high altitude plume impingement

NASA Technical Reports Server (NTRS)

Wojciechowski, C. J.; Penny, M. M.; Prozan, R. J.; Seymour, D.; Greenwood, T. F.

1972-01-01

Computer program has been developed as analytical tool to predict severity of effects of exhaust of rocket engines on adjacent spacecraft surfaces. Program computes forces, moments, pressures, and heating rates on surfaces immersed in or subjected to exhaust plume environments. Predictions will be useful in design of systems where such problems are anticipated.

A transient performance method for CO2 removal with regenerable adsorbents

NASA Technical Reports Server (NTRS)

Hwang, K. C.

1972-01-01

A computer program is described which can be used to predict the transient performance of vacuum-desorbed sorbent beds for CO2 or water removal, and composite beds of two sorbents for simultaneous humidity control and CO2 removal. The program was written primarily for silica gel and molecular sieve inorganic sorbents, but can be used for a variety of adsorbent materials. Part 2 of this report describes a computer program which can be used to predict performance for multiple-bed CO2-removal sorbent systems. This program is an expanded version of the composite sorbent bed program described in Part 1.

The U.S. Earthquake Prediction Program

USGS Publications Warehouse

Wesson, R.L.; Filson, J.R.

1981-01-01

There are two distinct motivations for earthquake prediction. The mechanistic approach aims to understand the processes leading to a large earthquake. The empirical approach is governed by the immediate need to protect lives and property. With our current lack of knowledge about the earthquake process, future progress cannot be made without gathering a large body of measurements. These are required not only for the empirical prediction of earthquakes, but also for the testing and development of hypotheses that further our understanding of the processes at work. The earthquake prediction program is basically a program of scientific inquiry, but one which is motivated by social, political, economic, and scientific reasons. It is a pursuit that cannot rely on empirical observations alone nor can it carried out solely on a blackboard or in a laboratory. Experiments must be carried out in the real Earth. 

File Usage Analysis and Resource Usage Prediction: a Measurement-Based Study. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Devarakonda, Murthy V.-S.

1987-01-01

A probabilistic scheme was developed to predict process resource usage in UNIX. Given the identity of the program being run, the scheme predicts CPU time, file I/O, and memory requirements of a process at the beginning of its life. The scheme uses a state-transition model of the program's resource usage in its past executions for prediction. The states of the model are the resource regions obtained from an off-line cluster analysis of processes run on the system. The proposed method is shown to work on data collected from a VAX 11/780 running 4.3 BSD UNIX. The results show that the predicted values correlate well with the actual. The coefficient of correlation between the predicted and actual values of CPU time is 0.84. Errors in prediction are mostly small. Some 82% of errors in CPU time prediction are less than 0.5 standard deviations of process CPU time.

Predictability of process resource usage - A measurement-based study on UNIX

NASA Technical Reports Server (NTRS)

Devarakonda, Murthy V.; Iyer, Ravishankar K.

1989-01-01

A probabilistic scheme is developed to predict process resource usage in UNIX. Given the identity of the program being run, the scheme predicts CPU time, file I/O, and memory requirements of a process at the beginning of its life. The scheme uses a state-transition model of the program's resource usage in its past executions for prediction. The states of the model are the resource regions obtained from an off-line cluster analysis of processes run on the system. The proposed method is shown to work on data collected from a VAX 11/780 running 4.3 BSD UNIX. The results show that the predicted values correlate well with the actual. The correlation coefficient betweeen the predicted and actual values of CPU time is 0.84. Errors in prediction are mostly small. Some 82 percent of errors in CPU time prediction are less than 0.5 standard deviations of process CPU time.

Predictability of process resource usage: A measurement-based study of UNIX

NASA Technical Reports Server (NTRS)

Devarakonda, Murthy V.; Iyer, Ravishankar K.

1987-01-01

A probabilistic scheme is developed to predict process resource usage in UNIX. Given the identity of the program being run, the scheme predicts CPU time, file I/O, and memory requirements of a process at the beginning of its life. The scheme uses a state-transition model of the program's resource usage in its past executions for prediction. The states of the model are the resource regions obtained from an off-line cluster analysis of processes run on the system. The proposed method is shown to work on data collected from a VAX 11/780 running 4.3 BSD UNIX. The results show that the predicted values correlate well with the actual. The correlation coefficient between the predicted and actual values of CPU time is 0.84. Errors in prediction are mostly small. Some 82% of errors in CPU time prediction are less than 0.5 standard deviations of process CPU time.

Exploring Planetary Analogs With an Ultracompact Near-Infrared Reflectance Instrument

NASA Astrophysics Data System (ADS)

Sobron, P.; Wang, A.

2017-12-01

Orbital reflectance spectrometers provide unique measurements of mineralogical features globally and repeatedly on planets and moons of our solar system. Mounted on landed spacecraft, reflectance sensors enable fine-scale investigations and can provide ground truth analyses to assess the validity of spectral remote sensing. We have developed a miniaturized, field-ready, active source NIR (1.14-4.76 μm) reflectance spectrometer (WIR) WIR enables in-situ, near real-time identification of water (structural or adsorbed), carbonates, sulfates, hydrated silicates, as well as C-H & N-H bonds in organic species. WIR is suited for lander/rover deployment in two modes: 1) In Traverse Survey Mode WIR is integrated into a rover wheel and performs nonstop synchronized data collection with every revolution of the wheel; large amounts of data points can be collected during a rover traverse that inform the spatial distribution of mineral phases; 2) In Point-Check Mode WIR is mounted on a robotic arm of a rover/lander and deployed on selected targets at planetary surfaces, or installed inside an analytical lab where samples from a drill/scoop are delivered for detailed analysis. Over the past 10 years we have deployed WIR in planetary analog settings, including hydrothermal springs in Svalbard (Norway) and High Andes (Chile); Arctic volcanoes in Svalbard; Arctic springs and permafrost in Axel Heiberg (Canada); Antarctic ice-covered lakes; saline playas in hyperarid deserts in the Tibetan Plateau (China) and the Atacama; high elevation ore deposits in the Andes and the Abitibi gold belt region (Canada); lava tubes in California; and acidic waters in Rio Tinto (Spain). We have recorded in-situ NIR reflectance spectra from these analogues and used improved spectral unmixing algorithms to determine the mineralogical composition at these sites. We have observed minerals consistent with sedimentary, mineralogical, morphological, and geochemical processes, some of which have been observed/predicted on other planets. In select cases, WIR data has provided critical ground truthing for remote sensing mineralogical investigations. At the Meeting, we will discuss our in-situ WIR analyses and path forward towards developing a flight version of WIR.

Enhancement of thermal blooming effect on free space propagation of high power CW laser beam

NASA Astrophysics Data System (ADS)

Kashef, Tamer M.; Mokhtar, Ayman M.; Ghoniemy, Samy A.

2018-02-01

In this paper, we present an enhanced model to predict the effect of thermal blooming and atmospheric turbulence, on high energy laser beams free space propagation. We introduce an implementation technique for the proposed mathematical models describing the effect of thermal blooming and atmospheric turbulence including wind blowing, and how it effect high power laser beam power, far field pattern, phase change effect and beam quality . An investigated model of adaptive optics was introduced to study how to improve the wave front and phase distortion caused by thermal blooming and atmospheric turbulence, the adaptive optics model with Actuator influence spacing 3 cm the that shows observed improvement in the Strehl ratio and in wave front and phase of the beam. These models was implemented using cooperative agents relying on GLAD software package. Without taking in consideration the effect of thermal blooming It was deduced that the beam at the source takes the Gaussian shape with uniform intensity distribution, we found that the beam converge on the required distance 4 km using converging optics, comparing to the laser beam under the effect of thermal blooming the far field pattern shows characteristic secondary blip and "sugar scoop" effect which is characteristic of thermal blooming. It was found that the thermal blooming causes the beam to steer many centimeters and to diverge beyond about 1.8 km than come to a focus at 4 km where the beam assumed to be focused on the required target. We assume that this target is moving at v = (4,-4) m/sec at distance 4 km and the wind is moving at v = (-10,-10) m/sec, it was found that the effect will be strongest when wind and target movement are at the same velocity. GLAD software is used to calculate the attenuation effects of the atmosphere as well as the phase perturbations due to temperature change in the air and effects caused as the beam crosses through the air due to wind and beam steering.

Nitrogen and Martian Habitability: Insights from Five Years of Curiosity Measurements

NASA Astrophysics Data System (ADS)

Stern, J. C.; Sutter, B.; Navarro-Gonzalez, R.; McKay, C.; Ming, D. W.; Mahaffy, P. R.; Archer, D., Jr.; Franz, H. B.; Freissinet, C.; Jackson, W. A.; Conrad, P. G.; Glavin, D. P.; Trainer, M. G.; Malespin, C.; McAdam, A.; Eigenbrode, J. L.; Teinturier, S.; Manning, C.

2017-12-01

The detection of "fixed" N on Mars in the form of nitrate by the Sample Analysis at Mars (SAM) instrument suite on the Mars Science Laboratory (MSL) Curiosity Rover [1] has major implications for martian habitability. "Follow the nitrogen" has been proposed as a strategy in the search for both extant and extinct life on Mars [e.g., 2]. Nitrogen is so crucial to life on Earth that life developed metabolic pathways to break the triple bond of N2 and "fix" atmospheric nitrogen to more biologically available molecules for use in proteins and informational polymers. Sequestration of nitrate in regolith has long been predicted to contribute to the removal of N from the martian atmosphere [e.g., 3], and our detections confirm that nitrogen fixation was occurring on ancient Mars. Detections of fixed nitrogen, particularly within the context of the habitable environment in Yellowknife Bay characterized by the MSL payload, are an important tool to assess whether life ever could have existed on ancient Mars. We present 5 years of analyses and interpretation of nitrate in solid martian drilled and scooped samples by SAM on MSL. Nitrate abundance reported by SAM in situ measurements ranges from non-detection to 681 ± 304 mg/kg [1,4] in the samples examined to date. The measured abundances are consistent with nitrogen fixation via impact generated thermal shock on ancient Mars and/or dry deposition from photochemistry of thermospheric NO. We review the integration of SAM data with terrestrial Mars analog work in order to better understand the timing of nitrogen fixation and mobility of nitrogen on Mars, and thus its availability to putative biology. In particular, the relationship between nitrate and other soluble salts, such as perchlorate, may help reveal the timing of nitrogen fixation and post-depositional behavior of nitrate on Mars [4]. Finally, we present a comparison of isotopic composition (δ15N) of nitrate with δ15N of atmospheric nitrogen (δ15N ≈ 574‰, [5]), which can be used to constrain atmospheric loss of N2 and model the evolution of the atmosphere on Mars.

Predicting Mission Success in Small Satellite Missions

NASA Technical Reports Server (NTRS)

Saunders, Mark; Richie, Wayne; Rogers, John; Moore, Arlene

1992-01-01

In our global society with its increasing international competition and tighter financial resources, governments, commercial entities and other organizations are becoming critically aware of the need to ensure that space missions can be achieved on time and within budget. This has become particularly true for the National Aeronautics and Space Administration's (NASA) Office of Space Science (OSS) which has developed their Discovery and Explorer programs to meet this need. As technologies advance, space missions are becoming smaller and more capable than their predecessors. The ability to predict the mission success of these small satellite missions is critical to the continued achievement of NASA science mission objectives. The NASA Office of Space Science, in cooperation with the NASA Langley Research Center, has implemented a process to predict the likely success of missions proposed to its Discovery and Explorer Programs. This process is becoming the basis for predicting mission success in many other NASA programs as well. This paper describes the process, methodology, tools and synthesis techniques used to predict mission success for this class of mission.

Predicting Mission Success in Small Satellite Missions

NASA Technical Reports Server (NTRS)

Saunders, Mark; Richie, R. Wayne; Moore, Arlene; Rogers, John

1999-01-01

In our global society with its increasing international competition and tighter financial resources, governments, commercial entities and other organizations are becoming critically aware of the need to ensure that space missions can be achieved on time and within budget. This has become particularly true for the National Aeronautics and Space Administration's (NASA's) Office of Space Science (OSS) which has developed their Discovery and Explorer programs to meet this need. As technologies advance, space missions are becoming smaller and more capable than their predecessors. The ability to predict the mission success of these small satellite missions is critical to the continued achievement of NASA science mission objectives. The NASA Office of Space Science, in cooperation with the NASA Langley Research Center, has implemented a process to predict the likely success of missions proposed to its Discovery and Explorer Programs. This process is becoming the basis for predicting mission success in many other NASA programs as well. This paper describes the process, methodology, tools and synthesis techniques used to predict mission success for this class of mission.

Modular Engine Noise Component Prediction System (MCP) Program Users' Guide

NASA Technical Reports Server (NTRS)

Golub, Robert A. (Technical Monitor); Herkes, William H.; Reed, David H.

2004-01-01

This is a user's manual for Modular Engine Noise Component Prediction System (MCP). This computer code allows the user to predict turbofan engine noise estimates. The program is based on an empirical procedure that has evolved over many years at The Boeing Company. The data used to develop the procedure include both full-scale engine data and small-scale model data, and include testing done by Boeing, by the engine manufacturers, and by NASA. In order to generate a noise estimate, the user specifies the appropriate engine properties (including both geometry and performance parameters), the microphone locations, the atmospheric conditions, and certain data processing options. The version of the program described here allows the user to predict three components: inlet-radiated fan noise, aft-radiated fan noise, and jet noise. MCP predicts one-third octave band noise levels over the frequency range of 50 to 10,000 Hertz. It also calculates overall sound pressure levels and certain subjective noise metrics (e.g., perceived noise levels).

Prediction of helicopter rotor discrete frequency noise: A computer program incorporating realistic blade motions and advanced acoustic formulation

NASA Technical Reports Server (NTRS)

Brentner, K. S.

1986-01-01

A computer program has been developed at the Langley Research Center to predict the discrete frequency noise of conventional and advanced helicopter rotors. The program, called WOPWOP, uses the most advanced subsonic formulation of Farassat that is less sensitive to errors and is valid for nearly all helicopter rotor geometries and flight conditions. A brief derivation of the acoustic formulation is presented along with a discussion of the numerical implementation of the formulation. The computer program uses realistic helicopter blade motion and aerodynamic loadings, input by the user, for noise calculation in the time domain. A detailed definition of all the input variables, default values, and output data is included. A comparison with experimental data shows good agreement between prediction and experiment; however, accurate aerodynamic loading is needed.

Development and status of data quality assurance program at NASA Langley research center: Toward national standards

NASA Technical Reports Server (NTRS)

Hemsch, Michael J.

1996-01-01

As part of a continuing effort to re-engineer the wind tunnel testing process, a comprehensive data quality assurance program is being established at NASA Langley Research Center (LaRC). The ultimate goal of the program is routing provision of tunnel-to-tunnel reproducibility with total uncertainty levels acceptable for test and evaluation of civilian transports. The operational elements for reaching such levels of reproducibility are: (1) statistical control, which provides long term measurement uncertainty predictability and a base for continuous improvement, (2) measurement uncertainty prediction, which provides test designs that can meet data quality expectations with the system's predictable variation, and (3) national standards, which provide a means for resolving tunnel-to-tunnel differences. The paper presents the LaRC design for the program and discusses the process of implementation.

Short and long term improvements in quality of chronic care delivery predict program sustainability.

PubMed

Cramm, Jane Murray; Nieboer, Anna Petra

2014-01-01

Empirical evidence on sustainability of programs that improve the quality of care delivery over time is lacking. Therefore, this study aims to identify the predictive role of short and long term improvements in quality of chronic care delivery on program sustainability. In this longitudinal study, professionals [2010 (T0): n=218, 55% response rate; 2011 (T1): n=300, 68% response rate; 2012 (T2): n=265, 63% response rate] from 22 Dutch disease-management programs completed surveys assessing quality of care and program sustainability. Our study findings indicated that quality of chronic care delivery improved significantly in the first 2 years after implementation of the disease-management programs. At T1, overall quality, self-management support, delivery system design, and integration of chronic care components, as well as health care delivery and clinical information systems and decision support, had improved. At T2, overall quality again improved significantly, as did community linkages, delivery system design, clinical information systems, decision support and integration of chronic care components, and self-management support. Multilevel regression analysis revealed that quality of chronic care delivery at T0 (p<0.001) and quality changes in the first (p<0.001) and second (p<0.01) years predicted program sustainability. In conclusion this study showed that disease-management programs based on the chronic care model improved the quality of chronic care delivery over time and that short and long term changes in the quality of chronic care delivery predicted the sustainability of the projects. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

Prediction of Academic Achievement in an NATA-Approved Graduate Athletic Training Education Program

PubMed Central

Keskula, Douglas R.; Sammarone, Paula G.; Perrin, David H.

1995-01-01

The Purpose of this investigation was to determine which information used in the applicant selection process would best predict the final grade point average of students in a National Athletic Trainers Association (NATA) graduate athletic training education program. The criterion variable used was the graduate grade-point average (GPAg) calculated at the completion of the program of study. The predictor variables included: 1) Graduate Record Examination-Quantitative (GRE-Q) scores; and 2) Graduate Record Examination-Verbal (GRE-V) scores, 3) preadmission grade point average (GPAp), 4) total athletic training hours (hours), and 5) curriculum or internship undergraduate athletic training education (program). Data from 55 graduate athletic training students during a 5-year period were evaluated. Stepwise multiple regression analysis indicated that GPAp was a significant predictor of GPAg, accounting for 34% of the variance. GRE-Q, GRE-V, hours, and program did not significantly contribute individually or in combination to the prediction of GPAg. The results of this investigation suggest that, of the variables examined, GPAp is the best predictor of academic success in an NATA-approved graduate athletic training education program. PMID:16558312

Description of the HiMAT Tailored composite structure and laboratory measured vehicle shape under load

NASA Technical Reports Server (NTRS)

Monaghan, R. C.

1981-01-01

The aeroelastically tailored outer wing and canard of the highly maneuverable aircraft technology (HiMAT) vehicle are closely examined and a general description of the overall structure of the vehicle is provided. Test data in the form of laboratory measured twist under load and predicted twist from the HiMAT NASTRAN structural design program are compared. The results of this comparison indicate that the measured twist is generally less than the NASTRAN predicted twist. These discrepancies in twist predictions are attributed, at least in part, to the inability of current analytical composite materials programs to provide sufficiently accurate properties of matrix dominated laminates for input into structural programs such as NASTRAN.

Dyadic Instruction for Middle School Students: Liking Promotes Learning

PubMed Central

Hartl, Amy C.; DeLay, Dawn; Laursen, Brett; Denner, Jill; Werner, Linda; Campe, Shannon; Ortiz, Eloy

2015-01-01

This study examines whether friendship facilitates or hinders learning in a dyadic instructional setting. Working in 80 same-sex pairs, 160 (60 girls, 100 boys) middle school students (M = 12.13 years old) were taught a new computer programming language and programmed a game. Students spent 14 to 30 (M = 22.7) hours in a programming class. At the beginning and the end of the project, each participant separately completed (a) computer programming knowledge assessments and (b) questionnaires rating their affinity for their partner. Results support the proposition that liking promotes learning: Greater partner affinity predicted greater subsequent increases in computer programming knowledge for both partners. One partner’s initial programming knowledge also positively predicted the other partner’s subsequent partner affinity. PMID:26688658

Micromechanics of metal matrix composites using the Generalized Method of Cells model (GMC) user's guide

NASA Technical Reports Server (NTRS)

Aboudi, Jacob; Pindera, Marek-Jerzy

1992-01-01

A user's guide for the program gmc.f is presented. The program is based on the generalized method of cells model (GMC) which is capable via a micromechanical analysis, of predicting the overall, inelastic behavior of unidirectional, multi-phase composites from the knowledge of the properties of the viscoplastic constituents. In particular, the program is sufficiently general to predict the response of unidirectional composites having variable fiber shapes and arrays.

Prediction of sonic boom from experimental near-field overpressure data. Volume 1: Method and results

NASA Technical Reports Server (NTRS)

Glatt, C. R.; Hague, D. S.; Reiners, S. J.

1975-01-01

A computerized procedure for predicting sonic boom from experimental near-field overpressure data has been developed. The procedure extrapolates near-field pressure signatures for a specified flight condition to the ground by the Thomas method. Near-field pressure signatures are interpolated from a data base of experimental pressure signatures. The program is an independently operated ODIN (Optimal Design Integration) program which obtains flight path information from other ODIN programs or from input.

Computer programs to characterize alloys and predict cyclic life using the total strain version of strainrange partitioning: Tutorial and users manual, version 1.0

NASA Technical Reports Server (NTRS)

Saltsman, James F.

1992-01-01

This manual presents computer programs for characterizing and predicting fatigue and creep-fatigue resistance of metallic materials in the high-temperature, long-life regime for isothermal and nonisothermal fatigue. The programs use the total strain version of Strainrange Partitioning (TS-SRP). An extensive database has also been developed in a parallel effort. This database is probably the largest source of high-temperature, creep-fatigue test data available in the public domain and can be used with other life prediction methods as well. This users manual, software, and database are all in the public domain and are available through COSMIC (382 East Broad Street, Athens, GA 30602; (404) 542-3265, FAX (404) 542-4807). Two disks accompany this manual. The first disk contains the source code, executable files, and sample output from these programs. The second disk contains the creep-fatigue data in a format compatible with these programs.

Economic benefits of using adaptive predictive models of reproductive toxicity in the context of a tiered testing program

EPA Science Inventory

A predictive model of reproductive toxicity, as observed in rat multigeneration reproductive (MGR) studies, was previously developed using high throughput screening (HTS) data from 36 in vitro assays mapped to 8 genes or gene-sets from Phase I of USEPA ToxCast research program, t...

Assessing the Effectiveness of Statistical Classification Techniques in Predicting Future Employment of Participants in the Temporary Assistance for Needy Families Program

ERIC Educational Resources Information Center

Montoya, Isaac D.

2008-01-01

Three classification techniques (Chi-square Automatic Interaction Detection [CHAID], Classification and Regression Tree [CART], and discriminant analysis) were tested to determine their accuracy in predicting Temporary Assistance for Needy Families program recipients' future employment. Technique evaluation was based on proportion of correctly…

Vehicle misalignment prediction and vehicle/experiment pointing compatibility assessment. [as used in Skylab Program

NASA Technical Reports Server (NTRS)

Hoverkamp, J. D.

1974-01-01

A technique for predicting vehicle misalignment, the relationship of vehicle misalignment to the total vehicle/experiment integration effort, and the methodology used in performing a vehicle/experiment pointing compatibility assessment, are presented. The technique is demonstrated in detail by describing how it was used on the Skylab Program.

The Limitations of the GRE in Predicting Success in Biomedical Graduate School

PubMed Central

Moneta-Koehler, Liane; Brown, Abigail M.; Petrie, Kimberly A.; Evans, Brent J.; Chalkley, Roger

2017-01-01

Historically, admissions committees for biomedical Ph.D. programs have heavily weighed GRE scores when considering applications for admission. The predictive validity of GRE scores on graduate student success is unclear, and there have been no recent investigations specifically on the relationship between general GRE scores and graduate student success in biomedical research. Data from Vanderbilt University Medical School’s biomedical umbrella program were used to test to what extent GRE scores can predict outcomes in graduate school training when controlling for other admissions information. Overall, the GRE did not prove useful in predicating who will graduate with a Ph.D., pass the qualifying exam, have a shorter time to defense, deliver more conference presentations, publish more first author papers, or obtain an individual grant or fellowship. GRE scores were found to be moderate predictors of first semester grades, and weak to moderate predictors of graduate GPA and some elements of a faculty evaluation. These findings suggest admissions committees of biomedical doctoral programs should consider minimizing their reliance on GRE scores to predict the important measures of progress in the program and student productivity. PMID:28076356

Propeller noise prediction

NASA Technical Reports Server (NTRS)

Zorumski, W. E.

1983-01-01

Analytic propeller noise prediction involves a sequence of computations culminating in the application of acoustic equations. The prediction sequence currently used by NASA in its ANOPP (aircraft noise prediction) program is described. The elements of the sequence are called program modules. The first group of modules analyzes the propeller geometry, the aerodynamics, including both potential and boundary layer flow, the propeller performance, and the surface loading distribution. This group of modules is based entirely on aerodynamic strip theory. The next group of modules deals with the actual noise prediction, based on data from the first group. Deterministic predictions of periodic thickness and loading noise are made using Farassat's time-domain methods. Broadband noise is predicted by the semi-empirical Schlinker-Amiet method. Near-field predictions of fuselage surface pressures include the effects of boundary layer refraction and (for a cylinder) scattering. Far-field predictions include atmospheric and ground effects. Experimental data from subsonic and transonic propellers are compared and NASA's future direction is propeller noise technology development are indicated.

Empirical predictions of hypervelocity impact damage to the space station

NASA Technical Reports Server (NTRS)

Rule, W. K.; Hayashida, K. B.

1991-01-01

A family of user-friendly, DOS PC based, Microsoft BASIC programs written to provide spacecraft designers with empirical predictions of space debris damage to orbiting spacecraft is described. The spacecraft wall configuration is assumed to consist of multilayer insulation (MLI) placed between a Whipple style bumper and the pressure wall. Predictions are based on data sets of experimental results obtained from simulating debris impacts on spacecraft using light gas guns on Earth. A module of the program facilitates the creation of the data base of experimental results that are used by the damage prediction modules of the code. The user has the choice of three different prediction modules to predict damage to the bumper, the MLI, and the pressure wall. One prediction module is based on fitting low order polynomials through subsets of the experimental data. Another prediction module fits functions based on nondimensional parameters through the data. The last prediction technique is a unique approach that is based on weighting the experimental data according to the distance from the design point.

KC-135 winglet program overview

NASA Technical Reports Server (NTRS)

Barber, M. R.; Selegan, D.

1982-01-01

A joint NASA/USAF program was conducted to accomplish the following objectives: (1) evaluate the benefits that could be achieved from the application of winglets to KC-135 aircraft; and (2) determine the ability of wind tunnel tests and analytical analysis to predict winglet characteristics. The program included wind-tunnel development of a test winglet configuration; analytical predictions of the changes to the aircraft resulting from the application of the test winglet; and finally, flight tests of the developed configuration. Pressure distribution, loads, stability and control, buffet, fuel mileage, and flutter data were obtained to fulfill the objectives of the program.

Core Engine Noise Program. Volume III. Prediction Methods -- Supplement I. - Extension of Prediction Methods

DTIC Science & Technology

1976-03-01

frequency noise transmission through turbine blade rows and addition of engine and component data to the prediction method for core noise. " Phase VI...lower turbine blade row attenuation for this low bypass engine . When the blade row attenuation is accounted for by means of a turbine work extrac...component and engine data. Currently, an in-depth program to investigate turbine blade row attenuation is underway (NAS3-19435 and DOT-FA75WA-3688). The

Biochemical, endocrine, and hematological factors in human oxygen tolerance extension: Predictive studies 6

NASA Technical Reports Server (NTRS)

Lambertsen, C. J.; Clark, J. M.

1992-01-01

The Predictive Studies VI (Biochemical, endocrine, and hematological factors in human oxygen tolerance extension) Program consisted of two related areas of research activity, integrated in design and performance, that were each based on an ongoing analysis of human organ oxygen tolerance data obtained for the continuous oxygen exposures of the prior Predictive Studies V Program. The two research areas effectively blended broad investigation of systematically varied intermittent exposure patterns in animals with very selective evaluation of specific exposure patterns in man.

Protein backbone and sidechain torsion angles predicted from NMR chemical shifts using artificial neural networks

PubMed Central

Shen, Yang; Bax, Ad

2013-01-01

A new program, TALOS-N, is introduced for predicting protein backbone torsion angles from NMR chemical shifts. The program relies far more extensively on the use of trained artificial neural networks than its predecessor, TALOS+. Validation on an independent set of proteins indicates that backbone torsion angles can be predicted for a larger, ≥ 90% fraction of the residues, with an error rate smaller than ca 3.5%, using an acceptance criterion that is nearly two-fold tighter than that used previously, and a root mean square difference between predicted and crystallographically observed (φ,ψ) torsion angles of ca 12°. TALOS-N also reports sidechain χ1 rotameric states for about 50% of the residues, and a consistency with reference structures of 89%. The program includes a neural network trained to identify secondary structure from residue sequence and chemical shifts. PMID:23728592

Thermoviscoelastic characterization and prediction of Kevlar/epoxy composite laminates

NASA Technical Reports Server (NTRS)

Gramoll, K. C.; Dillard, D. A.; Brinson, H. F.

1990-01-01

The thermoviscoelastic characterization of Kevlar 49/Fiberite 7714A epoxy composite lamina and the development of a numerical procedure to predict the viscoelastic response of any general laminate constructed from the same material were studied. The four orthotropic material properties, S sub 11, S sub 12, S sub 22, and S sub 66, were characterized by 20 minute static creep tests on unidirectional (0) sub 8, (10) sub 8, and (90) sub 16 lamina specimens. The Time-Temperature Superposition-Principle (TTSP) was used successfully to accelerate the characterization process. A nonlinear constitutive model was developed to describe the stress dependent viscoelastic response for each of the material properties. A numerical procedure to predict long term laminate properties from lamina properties (obtained experimentally) was developed. Numerical instabilities and time constraints associated with viscoelastic numerical techniques were discussed and solved. The numerical procedure was incorporated into a user friendly microcomputer program called Viscoelastic Composite Analysis Program (VCAP), which is available for IBM PC type computers. The program was designed for ease of use. The final phase involved testing actual laminates constructed from the characterized material, Kevlar/epoxy, at various temperatures and load level for 4 to 5 weeks. These results were compared with the VCAP program predictions to verify the testing procedure and to check the numerical procedure used in the program. The actual tests and predictions agreed for all test cases which included 1, 2, 3, and 4 fiber direction laminates.

The AFHSC-Division of GEIS Operations Predictive Surveillance Program: a multidisciplinary approach for the early detection and response to disease outbreaks

PubMed Central

2011-01-01

The Armed Forces Health Surveillance Center, Division of Global Emerging Infections Surveillance and Response System Operations (AFHSC-GEIS) initiated a coordinated, multidisciplinary program to link data sets and information derived from eco-climatic remote sensing activities, ecologic niche modeling, arthropod vector, animal disease-host/reservoir, and human disease surveillance for febrile illnesses, into a predictive surveillance program that generates advisories and alerts on emerging infectious disease outbreaks. The program’s ultimate goal is pro-active public health practice through pre-event preparedness, prevention and control, and response decision-making and prioritization. This multidisciplinary program is rooted in over 10 years experience in predictive surveillance for Rift Valley fever outbreaks in Eastern Africa. The AFHSC-GEIS Rift Valley fever project is based on the identification and use of disease-emergence critical detection points as reliable signals for increased outbreak risk. The AFHSC-GEIS predictive surveillance program has formalized the Rift Valley fever project into a structured template for extending predictive surveillance capability to other Department of Defense (DoD)-priority vector- and water-borne, and zoonotic diseases and geographic areas. These include leishmaniasis, malaria, and Crimea-Congo and other viral hemorrhagic fevers in Central Asia and Africa, dengue fever in Asia and the Americas, Japanese encephalitis (JE) and chikungunya fever in Asia, and rickettsial and other tick-borne infections in the U.S., Africa and Asia. PMID:21388561

Secondary Structure Predictions for Long RNA Sequences Based on Inversion Excursions and MapReduce.

PubMed

Yehdego, Daniel T; Zhang, Boyu; Kodimala, Vikram K R; Johnson, Kyle L; Taufer, Michela; Leung, Ming-Ying

2013-05-01

Secondary structures of ribonucleic acid (RNA) molecules play important roles in many biological processes including gene expression and regulation. Experimental observations and computing limitations suggest that we can approach the secondary structure prediction problem for long RNA sequences by segmenting them into shorter chunks, predicting the secondary structures of each chunk individually using existing prediction programs, and then assembling the results to give the structure of the original sequence. The selection of cutting points is a crucial component of the segmenting step. Noting that stem-loops and pseudoknots always contain an inversion, i.e., a stretch of nucleotides followed closely by its inverse complementary sequence, we developed two cutting methods for segmenting long RNA sequences based on inversion excursions: the centered and optimized method. Each step of searching for inversions, chunking, and predictions can be performed in parallel. In this paper we use a MapReduce framework, i.e., Hadoop, to extensively explore meaningful inversion stem lengths and gap sizes for the segmentation and identify correlations between chunking methods and prediction accuracy. We show that for a set of long RNA sequences in the RFAM database, whose secondary structures are known to contain pseudoknots, our approach predicts secondary structures more accurately than methods that do not segment the sequence, when the latter predictions are possible computationally. We also show that, as sequences exceed certain lengths, some programs cannot computationally predict pseudoknots while our chunking methods can. Overall, our predicted structures still retain the accuracy level of the original prediction programs when compared with known experimental secondary structure.

Mental illness stigma and disclosure in college students.

PubMed

Corrigan, Patrick W; Kosyluk, Kristin A; Markowitz, Fred; Brown, Robyn Lewis; Conlon, Bridget; Rees, Jo; Rosenberg, Jessica; Ellefson, Sarah; Al-Khouja, Maya

2016-06-01

The aim of this study was to investigate the relationship between mental illness identity, shame, secrecy, public stigma, and disclosure amongst college students. Participants included 1393 college students from five postsecondary institutions. Structural equation modeling was used to examine two path models predicting disclosure and desire to join a program aiding with disclosure. Variables found to be significant in predicting disclosure included mental illness identity and public stigma. In turn, desire for disclosure predicted desire to join a program aiding in disclosure. Gender and race/ethnic differences were observed, with men and Whites more likely to want to disclose a mental illness or join a program aiding with disclosure compared with women and non-Whites, respectively. These findings suggest that some college students may find programs aiding in disclosure useful in assisting them to achieve their desire to be "out" with their mental illness.

Auralization Architectures for NASA?s Next Generation Aircraft Noise Prediction Program

NASA Technical Reports Server (NTRS)

Rizzi, Stephen A.; Lopes, Leonard V.; Burley, Casey L.; Aumann, Aric R.

2013-01-01

Aircraft community noise is a significant concern due to continued growth in air traffic, increasingly stringent environmental goals, and operational limitations imposed by airport authorities. The assessment of human response to noise from future aircraft can only be afforded through laboratory testing using simulated flyover noise. Recent work by the authors demonstrated the ability to auralize predicted flyover noise for a state-of-the-art reference aircraft and a future hybrid wing body aircraft concept. This auralization used source noise predictions from NASA's Aircraft NOise Prediction Program (ANOPP) as input. The results from this process demonstrated that auralization based upon system noise predictions is consistent with, and complementary to, system noise predictions alone. To further develop and validate the auralization process, improvements to the interfaces between the synthesis capability and the system noise tools are required. This paper describes the key elements required for accurate noise synthesis and introduces auralization architectures for use with the next-generation ANOPP (ANOPP2). The architectures are built around a new auralization library and its associated Application Programming Interface (API) that utilize ANOPP2 APIs to access data required for auralization. The architectures are designed to make the process of auralizing flyover noise a common element of system noise prediction.

Comparison of two transonic noise prediction formulations using the aircraft noise prediction program

NASA Technical Reports Server (NTRS)

Spence, Peter L.

1987-01-01

This paper addresses recently completed work on using Farassat's Formulation 3 noise prediction code with the Aircraft Noise Prediction Program (ANOPP). Software was written to link aerodynamic loading generated by the Propeller Loading (PLD) module within ANOPP with formulation 3. Included are results of comparisons between Formulation 3 with ANOPP's existing noise prediction modules, Subsonic Propeller Noise (SPN) and Transonic Propeller Noise (TPN). Four case studies are investigated. Results of the comparison studies show excellent agreement for the subsonic cases. Differences found in the comparisons made under transonic conditions are strictly numerical and can be explained by the way in which the time derivative is calculated in Formulation 3. Also included is a section on how to execute Formulation 3 with ANOPP.

Design of the Next Generation Aircraft Noise Prediction Program: ANOPP2

NASA Technical Reports Server (NTRS)

Lopes, Leonard V., Dr.; Burley, Casey L.

2011-01-01

The requirements, constraints, and design of NASA's next generation Aircraft NOise Prediction Program (ANOPP2) are introduced. Similar to its predecessor (ANOPP), ANOPP2 provides the U.S. Government with an independent aircraft system noise prediction capability that can be used as a stand-alone program or within larger trade studies that include performance, emissions, and fuel burn. The ANOPP2 framework is designed to facilitate the combination of acoustic approaches of varying fidelity for the analysis of noise from conventional and unconventional aircraft. ANOPP2 integrates noise prediction and propagation methods, including those found in ANOPP, into a unified system that is compatible for use within general aircraft analysis software. The design of the system is described in terms of its functionality and capability to perform predictions accounting for distributed sources, installation effects, and propagation through a non-uniform atmosphere including refraction and the influence of terrain. The philosophy of mixed fidelity noise prediction through the use of nested Ffowcs Williams and Hawkings surfaces is presented and specific issues associated with its implementation are identified. Demonstrations for a conventional twin-aisle and an unconventional hybrid wing body aircraft configuration are presented to show the feasibility and capabilities of the system. Isolated model-scale jet noise predictions are also presented using high-fidelity and reduced order models, further demonstrating ANOPP2's ability to provide predictions for model-scale test configurations.

Improved NASA-ANOPP Noise Prediction Computer Code for Advanced Subsonic Propulsion Systems. Volume 2; Fan Suppression Model Development

NASA Technical Reports Server (NTRS)

Kontos, Karen B.; Kraft, Robert E.; Gliebe, Philip R.

1996-01-01

The Aircraft Noise Predication Program (ANOPP) is an industry-wide tool used to predict turbofan engine flyover noise in system noise optimization studies. Its goal is to provide the best currently available methods for source noise prediction. As part of a program to improve the Heidmann fan noise model, models for fan inlet and fan exhaust noise suppression estimation that are based on simple engine and acoustic geometry inputs have been developed. The models can be used to predict sound power level suppression and sound pressure level suppression at a position specified relative to the engine inlet.

Comparisons of AEROX computer program predictions of lift and induced drag with flight test data

NASA Technical Reports Server (NTRS)

Axelson, J.; Hill, G. C.

1981-01-01

The AEROX aerodynamic computer program which provides accurate predictions of induced drag and trim drag for the full angle of attack range and for Mach numbers from 0.4 to 3.0 is described. This capability is demonstrated comparing flight test data and AEROX predictions for 17 different tactical aircraft. Values of minimum (skin friction, pressure, and zero lift wave) drag coefficients and lift coefficient offset due to camber (when required) were input from the flight test data to produce total lift and drag curves. The comparisons of trimmed lift drag polars show excellent agreement between the AEROX predictions and the in flight measurements.

Predicting Backdrafting and Spillage for Natural-Draft Gas Combustion Appliances: Validating VENT-II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rapp, Vi H.; Pastor-Perez, Albert; Singer, Brett C.

2013-04-01

VENT-II is a computer program designed to provide detailed analysis of natural draft and induced draft combustion appliance vent-systems (i.e., furnace or water heater). This program is capable of predicting house depressurization thresholds that lead to backdrafting and spillage of combustion appliances; however, validation reports of the program being applied for this purpose are not readily available. The purpose of this report is to assess VENT-II’s ability to predict combustion gas spillage events due to house depressurization by comparing VENT-II simulated results with experimental data for four appliance configurations. The results show that VENT-II correctly predicts depressurizations resulting in spillagemore » for natural draft appliances operating in cold and mild outdoor conditions, but not for hot conditions. In the latter case, the predicted depressurizations depend on whether the vent section is defined as part of the vent connector or the common vent when setting up the model. Overall, the VENTII solver requires further investigation before it can be used reliably to predict spillage caused by depressurization over a full year of weather conditions, especially where hot conditions occur.« less

Predicting nursing home placement among home- and community-based services program participants.

PubMed

Greiner, Melissa A; Qualls, Laura G; Iwata, Isao; White, Heidi K; Molony, Sheila L; Sullivan, M Terry; Burke, Bonnie; Schulman, Kevin A; Setoguchi, Soko

2014-12-01

Several states offer publicly funded-care management programs to prevent long-term care placement of high-risk Medicaid beneficiaries. Understanding participant risk factors and services that may prevent long-term care placement can facilitate efficient allocation of program resources. To develop a practical prediction model to identify participants in a home- and community-based services program who are at highest risk for long-term nursing home placement, and to examine participant-level and program-level predictors of nursing home placement. In a retrospective observational study, we used deidentified data for participants in the Connecticut Home Care Program for Elders who completed an annual assessment survey between 2005 and 2010. We analyzed data on patient characteristics, use of program services, and short-term facility admissions in the previous year. We used logistic regression models with random effects to predict nursing home placement. The main outcome measures were long-term nursing home placement within 180 days or 1 year of assessment. Among 10,975 study participants, 1249 (11.4%) had nursing home placement within 1 year of annual assessment. Risk factors included Alzheimer's disease (odds ratio [OR], 1.30; 95% CI, 1.18-1.43), money management dependency (OR, 1.33; 95% CI, 1.18-1.51), living alone (OR, 1.53; 95% CI, 1.31-1.80), and number of prior short-term skilled nursing facility stays (OR, 1.46; 95% CI, 1.31-1.62). Use of a personal care assistance service was associated with 46% lower odds of nursing home placement. The model C statistic was 0.76 in the validation cohort. A model using information from a home- and community-based service program had strong discrimination to predict risk of long-term nursing home placement and can be used to identify high-risk participants for targeted interventions.

Counselor-Level Predictors of Sustained Use of an Indicated Preventive Intervention for Aggressive Children.

PubMed

Lochman, John E; Powell, Nicole P; Boxmeyer, Caroline L; Qu, Lixin; Sallee, Meghann; Wells, Karen C; Windle, Michael

2015-11-01

Despite widespread concern about the frequent failure of trained prevention staff to continue to use evidence-based programs following periods of intensive training, little research has addressed the characteristics and experiences of counselors that might predict their sustained use of a program. The current study follows a sample of school counselors who were trained to use an indicated preventive intervention, the Coping Power program, in an earlier dissemination study, and determines their levels of continued use of the program's child and parent components in the 2 years following the counselors' intensive training in the program. Counselor characteristics and experiences were also examined as predictors of their sustained use of the program components. The Coping Power program addresses children's emotional regulation, social cognitive processes, and increases in positive interpersonal behaviors with at-risk children who have been screened to have moderate to high levels of aggressive behavior. The results indicated that counselors' perceptions of interpersonal support from teachers within their schools, their perceptions of the effectiveness of the program, and their expectations for using the program were all predictive of program use over the following 2 years. In addition, certain counselor personality characteristics (i.e., conscientiousness) and the level of actual teacher-rated behavior change experienced by the children they worked with during training were predictors of counselors' use of the program during the second year after training. These results indicate the central importance of teacher support and of child progress during training in the prediction of counselors' sustained use of a prevention program.

Transforming Dissatisfaction with Services into Self-Determination: A Social Psychological Perspective on Community Program Effectiveness.

PubMed

Macias, Cathaleene; Aronson, Elliot; Hargreaves, William; Weary, Gifford; Barreira, Paul J; Harvey, John; Rodican, Charles F; Bickman, Leonard; Fisher, William

2009-08-01

A field study of supported employment for adults with mental illness (N=174) provided an experimental test of cognitive dissonance theory. We predicted that most work-interested individuals randomly assigned to a non-preferred program would reject services and lower their work aspirations. However, individuals who chose to pursue employment through a non-preferred program were expected to resolve this dissonance through favorable service evaluations and strong efforts to succeed at work. Significant work interest-by-service preference interactions supported these predictions. Over two years, participants interested in employment who obtained work through a non-preferred program stayed employed a median of 362 days versus 108 days for those assigned to a preferred program, and participants who obtained work through a non-preferred program had higher service satisfaction.

Process evaluation of the project P.A.T.H.S. (secondary 2 program): findings based on the co-walker scheme.

PubMed

Shek, Daniel T L; Tam, Suet-yan

2009-01-01

To understand the implementation quality of the Tier 1 Program (Secondary 2 Curriculum) of the P.A.T.H.S. Project, process evaluation was carried out by co-walkers through classroom observation of 195 units in 131 schools. Results showed that the overall level of program adherence was generally high with an average of 84.55%, and different factors of the implementation process were evaluated as positive. Quality of program implementation and achievement of program objectives were predicted by students' participation and involvement, strategies to enhance students' motivation, opportunity for reflection, time management, and class preparation. Success in program implementation was predicted by students' participation and involvement, classroom control, interactive delivery method, strategies to enhance students' motivation, opportunity for reflection, and lesson preparation.

Constraint Logic Programming approach to protein structure prediction.

PubMed

Dal Palù, Alessandro; Dovier, Agostino; Fogolari, Federico

2004-11-30

The protein structure prediction problem is one of the most challenging problems in biological sciences. Many approaches have been proposed using database information and/or simplified protein models. The protein structure prediction problem can be cast in the form of an optimization problem. Notwithstanding its importance, the problem has very seldom been tackled by Constraint Logic Programming, a declarative programming paradigm suitable for solving combinatorial optimization problems. Constraint Logic Programming techniques have been applied to the protein structure prediction problem on the face-centered cube lattice model. Molecular dynamics techniques, endowed with the notion of constraint, have been also exploited. Even using a very simplified model, Constraint Logic Programming on the face-centered cube lattice model allowed us to obtain acceptable results for a few small proteins. As a test implementation their (known) secondary structure and the presence of disulfide bridges are used as constraints. Simplified structures obtained in this way have been converted to all atom models with plausible structure. Results have been compared with a similar approach using a well-established technique as molecular dynamics. The results obtained on small proteins show that Constraint Logic Programming techniques can be employed for studying protein simplified models, which can be converted into realistic all atom models. The advantage of Constraint Logic Programming over other, much more explored, methodologies, resides in the rapid software prototyping, in the easy way of encoding heuristics, and in exploiting all the advances made in this research area, e.g. in constraint propagation and its use for pruning the huge search space.

Family risk as a predictor of initial engagement and follow-through in a universal nurse home visiting program to prevent child maltreatment.

PubMed

Alonso-Marsden, Shelley; Dodge, Kenneth A; O'Donnell, Karen J; Murphy, Robert A; Sato, Jeannine M; Christopoulos, Christina

2013-08-01

As nurse home visiting to prevent child maltreatment grows in popularity with both program administrators and legislators, it is important to understand engagement in such programs in order to improve their community-wide effects. This report examines family demographic and infant health risk factors that predict engagement and follow-through in a universal home-based maltreatment prevention program for new mothers in Durham County, North Carolina. Trained staff members attempted to schedule home visits for all new mothers during the birthing hospital stay, and then nurses completed scheduled visits three to five weeks later. Medical record data was used to identify family demographic and infant health risk factors for maltreatment. These variables were used to predict program engagement (scheduling a visit) and follow-through (completing a scheduled visit). Program staff members were successful in scheduling 78% of eligible families for a visit and completing 85% of scheduled visits. Overall, 66% of eligible families completed at least one visit. Structural equation modeling (SEM) analyses indicated that high demographic risk and low infant health risk were predictive of scheduling a visit. Both low demographic and infant health risk were predictive of visit completion. Findings suggest that while higher demographic risk increases families' initial engagement, it might also inhibit their follow-through. Additionally, parents of medically at-risk infants may be particularly difficult to engage in universal home visiting interventions. Implications for recruitment strategies of home visiting programs are discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Predicting Social Responsibility and Belonging in Urban After-School Physical Activity Programs with Underserved Children

ERIC Educational Resources Information Center

Martin, Jeffrey J.; Byrd, Brigid; Garn, Alex; McCaughtry, Nate; Kulik, Noel; Centeio, Erin

2016-01-01

The purpose of this cross sectional study was to predict feelings of belonging and social responsibility based on the motivational climate perceptions and contingent self-worth of children participating in urban after-school physical activity programs. Three-hundred and four elementary school students from a major Midwestern city participated.…

Jet engine noise source and noise footprint computer programs

NASA Technical Reports Server (NTRS)

Dunn, D. G.; Peart, N. A.; Miller, D. L.; Crowley, K. C.

1972-01-01

Calculation procedures are presented for predicting maximum passby noise levels and contours (footprints) of conventional jet aircraft with or without noise suppression devices. The procedures have been computerized and a user's guide is presented for the computer programs to be used in predicting the noise characteristics during aircraft takeoffs, fly-over, and/or landing operations.

Predicting Changes in Cultural Sensitivity among Students of Spanish during Short-Term Study Abroad

ERIC Educational Resources Information Center

Martinsen, Rob

2011-01-01

Short-term study abroad programs of less than a semester are becoming increasingly popular among undergraduate students in the United States. However, little research has examined the changes in students' cultural sensitivity through their participation in such programs or what factors may predict growth and improvement in such areas. This study…

Predictive Validity and Impact of CAEP Standard 3.2: Results from One Master's-Level Teacher Preparation Program

ERIC Educational Resources Information Center

Evans, Carla M.

2017-01-01

This study investigates the predictive validity and policy impact of Council for Accreditation of Educator Preparation minimum admission requirements in Standard 3.2 on teacher preparation programs (TPPs), their applicants, and the broader field of educator preparation. Undergraduate grade point average (GPA) and Graduate Record Examination (GRE)…

PREDICTING ACHIEVEMENT IN TECHNICAL PROGRAMS AT THE NORTH DAKOTA STATE SCHOOL OF SCIENCE.

ERIC Educational Resources Information Center

ANDERSON, ROGER C.

DATA WERE COLLECTED FROM SCHOOL RECORDS FOR 876 STUDENTS ENROLLED IN SIX TECHNICAL PROGRAMS FROM 1961-63. THIS PROVIDES EIGHT BIOGRAPHICAL AND 17 ACADEMIC VARIABLES WHICH WERE EXAMINED FOR THEIR USEFULNESS IN PREDICTING STUDENT SUCCESS. THE STUDENT SAMPLE WAS DIVIDED INTO GRADUATES AND NONGRADUATES. NONGRADUATES WERE THOSE WHO ATTENDED FOUR OR…

Predicting Success Using HESI A2 Entrance Tests in an Associate Degree Nursing Program

ERIC Educational Resources Information Center

Bodman, Susan

2012-01-01

A challenge presented to nurse educators is retention of nursing students. This has led nursing faculty to review admission requirements and question how well entrance tests predict success in Associate Degree Nursing Programs. The purpose of this study was to investigate the relationship between the HESI Admission Assessment Exam (HESI A2) and…

Do Prior Studies Matter?: Predicting Proficiencies Required to Excel Academically in Law School at Makerere University, Uganda

ERIC Educational Resources Information Center

Nalukenge, Betty; Wamala, Robert; Ocaya, Bruno

2016-01-01

Purpose: Introduction of law school admission examinations has increased the debate regarding the relevance of prior studies for the enrollees in the program. The key issues of contention are whether prior studies reliably predict academic achievement of enrollees, and demonstrate proficiencies required for admission in the program. The purpose of…

Testing and Extending VSEPR with WebMO and MOPAC or GAMESS

ERIC Educational Resources Information Center

McNaught, Ian J.

2011-01-01

VSEPR is a topic that is commonly taught in undergraduate chemistry courses. The readily available Web-based program WebMO, in conjunction with the computational chemistry programs MOPAC and GAMESS, is used to quantitatively test a wide range of predictions of VSEPR. These predictions refer to the point group of the molecule, including the…

Viewing death on television increases the appeal of advertised products.

PubMed

Dar-Nimrod, Ilan

2012-01-01

References to death abound in many television programs accessible to most people. Terror Management Theory postulates that existential anxiety, which death reminders activate, may reinforce materialistic tendencies. The current article explores the effect of a death reminder in television shows on the desirability of advertised products. Consistent with Terror Management Theory's predictions, in two studies participants show greater desire for products, which were advertised immediately following clips from programs that featured a death scene, compared with programs that did not. Cognitive accessibility of death predicted the appeal difference while changes in affect or interest in the show did not. The findings are discussed in light on affective and existential theories which make opposite predictions. Implications and future directions are considered.

Status report on the Aeronautical Research Institute of Sweden version of the missile aerodynamics program LARV, for calculation of static aerodynamic properties and longitudinal aerodynamic damping derivatives. Part 1: Theory

NASA Astrophysics Data System (ADS)

Weibust, E.

Improvements to a missile aerodynamics program which enable it to (a) calculate aerodynamic coefficients as input for a flight mechanics model, (b) check manufacturers' data or estimate performance from photographs, (c) reduce wind tunnel testing, and (d) aid optimization studies, are discussed. Slender body theory is used for longitudinal damping derivatives prediction. Program predictions were compared to known values. Greater accuracy is required in the estimation of drag due to excrescences on actual missile configurations, the influence of a burning motor, and nonlinear effects in the stall region. Prediction of pressure centers on wings and on bodies in presence of wings must be improved.

Viewing Death on Television Increases the Appeal of Advertised Products

PubMed Central

DAR-NIMROD, ILAN

2012-01-01

References to death abound in many television programs accessible to most people. Terror Management Theory (TMT) postulates that existential anxiety, which death reminders activate, may reinforce materialistic tendencies. The current paper explores the effect of a death reminder in television shows on the desirability of advertised products. Consistent with TMT's predictions, in two studies participants show greater desire for products, which were advertised immediately following clips from programs that featured a death scene, compared with programs that did not. Cognitive accessibility of death predicted the appeal difference while changes in affect or interest in the show did not. The findings are discussed in light on affective and existential theories which make opposite predictions. Implications and future directions are considered. PMID:22468421

Dinucleotide controlled null models for comparative RNA gene prediction.

PubMed

Gesell, Tanja; Washietl, Stefan

2008-05-27

Comparative prediction of RNA structures can be used to identify functional noncoding RNAs in genomic screens. It was shown recently by Babak et al. [BMC Bioinformatics. 8:33] that RNA gene prediction programs can be biased by the genomic dinucleotide content, in particular those programs using a thermodynamic folding model including stacking energies. As a consequence, there is need for dinucleotide-preserving control strategies to assess the significance of such predictions. While there have been randomization algorithms for single sequences for many years, the problem has remained challenging for multiple alignments and there is currently no algorithm available. We present a program called SISSIz that simulates multiple alignments of a given average dinucleotide content. Meeting additional requirements of an accurate null model, the randomized alignments are on average of the same sequence diversity and preserve local conservation and gap patterns. We make use of a phylogenetic substitution model that includes overlapping dependencies and site-specific rates. Using fast heuristics and a distance based approach, a tree is estimated under this model which is used to guide the simulations. The new algorithm is tested on vertebrate genomic alignments and the effect on RNA structure predictions is studied. In addition, we directly combined the new null model with the RNAalifold consensus folding algorithm giving a new variant of a thermodynamic structure based RNA gene finding program that is not biased by the dinucleotide content. SISSIz implements an efficient algorithm to randomize multiple alignments preserving dinucleotide content. It can be used to get more accurate estimates of false positive rates of existing programs, to produce negative controls for the training of machine learning based programs, or as standalone RNA gene finding program. Other applications in comparative genomics that require randomization of multiple alignments can be considered. SISSIz is available as open source C code that can be compiled for every major platform and downloaded here: http://sourceforge.net/projects/sissiz.

Comparison of the Predictive Performance and Interpretability of Random Forest and Linear Models on Benchmark Data Sets.

PubMed

Marchese Robinson, Richard L; Palczewska, Anna; Palczewski, Jan; Kidley, Nathan

2017-08-28

The ability to interpret the predictions made by quantitative structure-activity relationships (QSARs) offers a number of advantages. While QSARs built using nonlinear modeling approaches, such as the popular Random Forest algorithm, might sometimes be more predictive than those built using linear modeling approaches, their predictions have been perceived as difficult to interpret. However, a growing number of approaches have been proposed for interpreting nonlinear QSAR models in general and Random Forest in particular. In the current work, we compare the performance of Random Forest to those of two widely used linear modeling approaches: linear Support Vector Machines (SVMs) (or Support Vector Regression (SVR)) and partial least-squares (PLS). We compare their performance in terms of their predictivity as well as the chemical interpretability of the predictions using novel scoring schemes for assessing heat map images of substructural contributions. We critically assess different approaches for interpreting Random Forest models as well as for obtaining predictions from the forest. We assess the models on a large number of widely employed public-domain benchmark data sets corresponding to regression and binary classification problems of relevance to hit identification and toxicology. We conclude that Random Forest typically yields comparable or possibly better predictive performance than the linear modeling approaches and that its predictions may also be interpreted in a chemically and biologically meaningful way. In contrast to earlier work looking at interpretation of nonlinear QSAR models, we directly compare two methodologically distinct approaches for interpreting Random Forest models. The approaches for interpreting Random Forest assessed in our article were implemented using open-source programs that we have made available to the community. These programs are the rfFC package ( https://r-forge.r-project.org/R/?group_id=1725 ) for the R statistical programming language and the Python program HeatMapWrapper [ https://doi.org/10.5281/zenodo.495163 ] for heat map generation.

A research program for improving heat transfer prediction for the laminar to turbulent transition region of turbine vanes/blades

NASA Technical Reports Server (NTRS)

Simon, Frederick F.

1993-01-01

A program sponsored by NASA for the investigation of the heat transfer in the transition region of turbine vanes and blades with the objective of improving the capability for predicting heat transfer is described. The accurate prediction of gas-side heat transfer is important to the determination of turbine longevity, engine performance, and developmental costs. The need for accurate predictions will become greater as the operating temperatures and stage loading levels of advanced turbine engines increase. The present methods for predicting transition shear stress and heat transfer on turbine blades are based on incomplete knowledge and are largely empirical. To meet the objective of the NASA program, a team approach consisting of researchers from government, universities, a research institute, and a small business is presented. The research is divided into the areas of experiments, direct numerical simulations (DNS), and turbulence modeling. A summary of the results to date is given for the above research areas in a high-disturbance environment (bypass transition) with a discussion of the model development necessary for use in numerical codes.

The validity of ACT-PEP test scores for predicting academic performance of registered nurses in BSN programs.

PubMed

Yang, J C; Noble, J

1990-01-01

This study investigated the validity of three American College Testing-Proficiency Examination Program (ACT-PEP) tests (Maternal and Child Nursing, Psychiatric/Mental Health Nursing, Adult Nursing) for predicting the academic performance of registered nurses (RNs) enrolled in bachelor's degree BSN programs nationwide. This study also examined RN students' performance on the ACT-PEP tests by their demographic characteristics: student's age, sex, race, student status (full- or part-time), and employment status (full- or part-time). The total sample for the three tests comprised 2,600 students from eight institutions nationwide. The median correlation coefficients between the three ACT-PEP tests and the semester grade point averages ranged from .36 to .56. Median correlation coefficients increased over time, supporting the stability of ACT-PEP test scores for predicting academic performance over time. The relative importance of selected independent variables for predicting academic performance was also examined; the most important variable for predicting academic performance was typically the ACT-PEP test score. Across the institutions, student demographic characteristics did not contribute significantly to explaining academic performance, over and above ACT-PEP scores.

Aircraft noise prediction program theoretical manual, part 1

NASA Technical Reports Server (NTRS)

Zorumski, W. E.

1982-01-01

Aircraft noise prediction theoretical methods are given. The prediction of data which affect noise generation and propagation is addressed. These data include the aircraft flight dynamics, the source noise parameters, and the propagation effects.

An investigation of language and phonological development and the responsiveness of preschool age children to the Lidcombe Program.

PubMed

Rousseau, Isabelle; Packman, Ann; Onslow, Mark; Harrison, Elisabeth; Jones, Mark

2007-01-01

Knowledge of variables that predict treatment time is of benefit in deciding when to start treatment for early stuttering. To date, the only variable clearly related to treatment time with the Lidcombe Program is pre-treatment stuttering frequency. Previous studies have shown that children whose stuttering is more severe take longer to complete Stage 1 of the program. However, studies to date have not investigated phonology and language as predictors of treatment time. In the context of a Phase II clinical trial, the present prospective study showed that phonological development does not predict treatment time but that, together, stuttering severity, MLU and CELF Receptive Score predict 35-45% of the variance for time taken to complete Stage 1. The reader should be able to (1) understand guidelines developed for the timing of intervention with the Lidcombe Program based on previous retrospective studies, (2) determine whether pre-treatment language and phonological development play a role in treatment-led recovery with the Lidcombe Program and (3) understand recent empirical evidence on time taken by preschool children to complete Stage 1 of the Lidcombe Program.

Modifications to an interactive model of the human body during exercise: With special emphasis on thermoregulation. M.S. Thesis

NASA Technical Reports Server (NTRS)

Scherb, Megan Kay

1993-01-01

Since 1988 an interactive computer model of the human body during exercise has been under development by a number of undergraduate students in the Department of Chemical Engineering at Iowa State University. The program, written under the direction of Dr. Richard C. Seagrave, uses physical characteristics of the user, environmental conditions and activity information to predict the onset of hypothermia, hyperthermia, dehydration, or exhaustion for various levels and durations of a specified exercise. The program however, was severely limited in predicting the onset of dehydration due to the lack of sophistication with which the program predicts sweat rate and its relationship to sensible water loss, degree of acclimatization, and level of physical training. Additionally, it was not known whether sweat rate also depended on age and gender. For these reasons, the goal of this creative component was to modify the program in the above mentioned areas by applying known information and empirical relationships from literature. Furthermore, a secondary goal was to improve the consistency with which the program was written by modifying user input statements and improving the efficiency and logic of the program calculations.

A computer program for predicting nonlinear uniaxial material responses using viscoplastic models

NASA Technical Reports Server (NTRS)

Chang, T. Y.; Thompson, R. L.

1984-01-01

A computer program was developed for predicting nonlinear uniaxial material responses using viscoplastic constitutive models. Four specific models, i.e., those due to Miller, Walker, Krieg-Swearengen-Rhode, and Robinson, are included. Any other unified model is easily implemented into the program in the form of subroutines. Analysis features include stress-strain cycling, creep response, stress relaxation, thermomechanical fatigue loop, or any combination of these responses. An outline is given on the theoretical background of uniaxial constitutive models, analysis procedure, and numerical integration methods for solving the nonlinear constitutive equations. In addition, a discussion on the computer program implementation is also given. Finally, seven numerical examples are included to demonstrate the versatility of the computer program developed.

MAGMIX: a basic program to calculate viscosities of interacting magmas of differing composition, temperature, and water content

USGS Publications Warehouse

Frost, T.P.; Lindsay, J.R.

1988-01-01

MAGMIX is a BASIC program designed to predict viscosities at thermal equilibrium of interacting magmas of differing compositions, initial temperatures, crystallinities, crystal sizes, and water content for any mixing proportion between end members. From the viscosities of the end members at thermal equilibrium, it is possible to predict the styles of magma interaction expected for different initial conditions. The program is designed for modeling the type of magma interaction between hypersthenenormative magmas at upper crustal conditions. Utilization of the program to model magma interaction at pressures higher than 200 MPa would require modification of the program to account for the effects of pressure on heat of fusion and magma density. ?? 1988.

BEHAVE: fire behavior prediction and fuel modeling system-BURN Subsystem, part 1

Treesearch

Patricia L. Andrews

1986-01-01

Describes BURN Subsystem, Part 1, the operational fire behavior prediction subsystem of the BEHAVE fire behavior prediction and fuel modeling system. The manual covers operation of the computer program, assumptions of the mathematical models used in the calculations, and application of the predictions.

Protein side chain conformation predictions with an MMGBSA energy function.

PubMed

Gaillard, Thomas; Panel, Nicolas; Simonson, Thomas

2016-06-01

The prediction of protein side chain conformations from backbone coordinates is an important task in structural biology, with applications in structure prediction and protein design. It is a difficult problem due to its combinatorial nature. We study the performance of an "MMGBSA" energy function, implemented in our protein design program Proteus, which combines molecular mechanics terms, a Generalized Born and Surface Area (GBSA) solvent model, with approximations that make the model pairwise additive. Proteus is not a competitor to specialized side chain prediction programs due to its cost, but it allows protein design applications, where side chain prediction is an important step and MMGBSA an effective energy model. We predict the side chain conformations for 18 proteins. The side chains are first predicted individually, with the rest of the protein in its crystallographic conformation. Next, all side chains are predicted together. The contributions of individual energy terms are evaluated and various parameterizations are compared. We find that the GB and SA terms, with an appropriate choice of the dielectric constant and surface energy coefficients, are beneficial for single side chain predictions. For the prediction of all side chains, however, errors due to the pairwise additive approximation overcome the improvement brought by these terms. We also show the crucial contribution of side chain minimization to alleviate the rigid rotamer approximation. Even without GB and SA terms, we obtain accuracies comparable to SCWRL4, a specialized side chain prediction program. In particular, we obtain a better RMSD than SCWRL4 for core residues (at a higher cost), despite our simpler rotamer library. Proteins 2016; 84:803-819. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Aircraft noise prediction program user's manual

NASA Technical Reports Server (NTRS)

Gillian, R. E.

1982-01-01

The Aircraft Noise Prediction Program (ANOPP) predicts aircraft noise with the best methods available. This manual is designed to give the user an understanding of the capabilities of ANOPP and to show how to formulate problems and obtain solutions by using these capabilities. Sections within the manual document basic ANOPP concepts, ANOPP usage, ANOPP functional modules, ANOPP control statement procedure library, and ANOPP permanent data base. appendixes to the manual include information on preparing job decks for the operating systems in use, error diagnostics and recovery techniques, and a glossary of ANOPP terms.

Identifying Medical Students Likely to Exhibit Poor Professionalism and Knowledge During Internship

PubMed Central

Durning, Steven J.; Cohen, Daniel L.; Cruess, David; Jackson, Jeffrey L.

2007-01-01

CONTEXT Identifying medical students who will perform poorly during residency is difficult. OBJECTIVE Determine whether commonly available data predicts low performance ratings during internship by residency program directors. DESIGN Prospective cohort involving medical school data from graduates of the Uniformed Services University (USU), surveys about experiences at USU, and ratings of their performance during internship by their program directors. SETTING Uniformed Services University. PARTICIPANTS One thousand sixty-nine graduates between 1993 and 2002. MAIN OUTCOME MEASURE(S) Residency program directors completed an 18-item survey assessing intern performance. Factor analysis of these items collapsed to 2 domains: knowledge and professionalism. These domains were scored and performance dichotomized at the 10th percentile. RESULTS Many variables showed a univariate relationship with ratings in the bottom 10% of both domains. Multivariable logistic regression modeling revealed that grades earned during the third year predicted low ratings in both knowledge (odds ratio [OR] = 4.9; 95%CI = 2.7–9.2) and professionalism (OR = 7.3; 95%CI = 4.1–13.0). USMLE step 1 scores (OR = 1.03; 95%CI = 1.01–1.05) predicted knowledge but not professionalism. The remaining variables were not independently predictive of performance ratings. The predictive ability for the knowledge and professionalism models was modest (respective area under ROC curves = 0.735 and 0.725). CONCLUSIONS A strong association exists between the third year GPA and internship ratings by program directors in professionalism and knowledge. In combination with third year grades, either the USMLE step 1 or step 2 scores predict poor knowledge ratings. Despite a wealth of available markers and a large data set, predicting poor performance during internship remains difficult. PMID:17952512