Combined Numerical/Analytical Perturbation Solutions of the Navier-Stokes Equations for Aerodynamic (Ejector Nozzle) Flows

NASA Technical Reports Server (NTRS)

DeChant, Lawrence J.

1997-01-01

In spite of the rapid advances in both scalar and parallel computational tools, the large number and breadth of variables involved in aerodynamic systems make the use of parabolized or even boundary layer fluid flow models impractical for both preliminary design and inverse design problems. Given this restriction, we have concluded that reduced or approximate models are an important family of tools for design purposes. This study of a combined perturbation/numerical modeling methodology with an application to ejector-mixer nozzles (shown schematically in the following figure) is nearing completion. The work is being funded by a grant from the NASA Lewis Research Center to Texas A&M University. These ejector-mixer nozzle models are designed to be of use to the High Speed Civil Transport Program and may be adopted by both NASA and industry. A computer code incorporating the ejector-mixer models is under development. This code, the Differential Reduced Ejector/Mixer Analysis (DREA), can be run fast enough to be used as a subroutine or to be called by a design optimization routine. Simplified conservation equations--x-momentum, energy, and mass conservation--are used to define the model. Unlike other preliminary design models, DREA requires minimal empirical input and includes vortical mixing and a fully compressible formulation among other features. DREA is being validated by comparing it with results obtained from open literature and proprietary industry data. Preliminary results for a subsonic ejector and a supersonic ejector are shown. In addition, dedicated experiments have been performed at Texas A&M. These experiments use a hydraulic/gas flow analog to provide information about the inviscid mixing interface structure. Final validation and documentation of this work is expected by May of 1997. However, preliminary versions of DREA can be expected in early 1997. In summary, DREA provides a sufficiently detailed and realistic ejector-mixer nozzle model at a computational cost compatible with preliminary design applications.

A dynamic multi-level optimal design method with embedded finite-element modeling for power transformers

NASA Astrophysics Data System (ADS)

Zhang, Yunpeng; Ho, Siu-lau; Fu, Weinong

2018-05-01

This paper proposes a dynamic multi-level optimal design method for power transformer design optimization (TDO) problems. A response surface generated by second-order polynomial regression analysis is updated dynamically by adding more design points, which are selected by Shifted Hammersley Method (SHM) and calculated by finite-element method (FEM). The updating stops when the accuracy requirement is satisfied, and optimized solutions of the preliminary design are derived simultaneously. The optimal design level is modulated through changing the level of error tolerance. Based on the response surface of the preliminary design, a refined optimal design is added using multi-objective genetic algorithm (MOGA). The effectiveness of the proposed optimal design method is validated through a classic three-phase power TDO problem.

Validation of the Gifted Rating Scales–School Form in China

PubMed Central

Li, Huijun; Pfeiffer, Steven I.; Petscher, Yaacov; Kumtepe, Alper T.; Mo, Guofang

2015-01-01

The Gifted Rating Scales–School Form (GRS-S), a teacher-completed rating scale, is designed to identify five types of giftedness and motivation. This study examines the reliability and validity of a Chinese-translated version of the GRS-S with a sample of Chinese elementary and middle school students (N = 499). The Chinese GRSS was found to have high internal consistency. Results of the confirmatory factor analysis corroborated the six-factor solution of the original GRS-S. Comparison of the GRS-S scores and measures of academic performance provide preliminary support for the criterion validity of the Chinese-translated GRS-S. Significant age and gender differences on the Chinese GRS-S were found. Results provide preliminary support for the Chinese version of the GRS-S as a reliable and valid measure of giftedness for Chinese students. PMID:26346730

Structural analysis for preliminary design of High Speed Civil Transport (HSCT)

NASA Technical Reports Server (NTRS)

Bhatia, Kumar G.

1992-01-01

In the preliminary design environment, there is a need for quick evaluation of configuration and material concepts. The simplified beam representations used in the subsonic, high aspect ratio wing platform are not applicable for low aspect ratio configurations typical of supersonic transports. There is a requirement to develop methods for efficient generation of structural arrangement and finite element representation to support multidisciplinary analysis and optimization. In addition, empirical data bases required to validate prediction methods need to be improved for high speed civil transport (HSCT) type configurations.

Technical Analysis of Scores on the "Self-Efficacy Self-Report Scale"

ERIC Educational Resources Information Center

Erford, Bradley T.; Schein, Hallie; Duncan, Kelly

2011-01-01

The purpose of this study was to provide preliminary analysis of reliability and validity of scores on the "Self-Efficacy Self-Report Scale", which was designed to assess general self-efficacy in students aged 10 to 17 years. Confirmatory factor analysis on cross-validated samples was conducted revealing a marginal fit of the data to the…

A Rasch-Based Validation of the Vocabulary Size Test

ERIC Educational Resources Information Center

Beglar, David

2010-01-01

The primary purpose of this study was to provide preliminary validity evidence for a 140-item form of the Vocabulary Size Test, which is designed to measure written receptive knowledge of the first 14,000 words of English. Nineteen native speakers of English and 178 native speakers of Japanese participated in the study. Analyses based on the Rasch…

The ALL-OUT Library; A Design for Computer-Powered, Multidimensional Services.

ERIC Educational Resources Information Center

Sleeth, Jim; LaRue, James

1983-01-01

Preliminary description of design of electronic library and home information delivery system highlights potentials of personal computer interface program (applying for service, assuring that users are valid, checking for measures, searching, locating titles) and incorporation of concepts used in other information systems (security checks,…

Validation Methods Research for Fault-Tolerant Avionics and Control Systems: Working Group Meeting, 2

NASA Technical Reports Server (NTRS)

Gault, J. W. (Editor); Trivedi, K. S. (Editor); Clary, J. B. (Editor)

1980-01-01

The validation process comprises the activities required to insure the agreement of system realization with system specification. A preliminary validation methodology for fault tolerant systems documented. A general framework for a validation methodology is presented along with a set of specific tasks intended for the validation of two specimen system, SIFT and FTMP. Two major areas of research are identified. First, are those activities required to support the ongoing development of the validation process itself, and second, are those activities required to support the design, development, and understanding of fault tolerant systems.

Development and Preliminary Testing of a High Precision Long Stroke Slit Change Mechanism for the SPICE Instrument

NASA Technical Reports Server (NTRS)

Paciotti, Gabriel; Humphries, Martin; Rottmeier, Fabrice; Blecha, Luc

2014-01-01

In the frame of ESA's Solar Orbiter scientific mission, Almatech has been selected to design, develop and test the Slit Change Mechanism of the SPICE (SPectral Imaging of the Coronal Environment) instrument. In order to guaranty optical cleanliness level while fulfilling stringent positioning accuracies and repeatability requirements for slit positioning in the optical path of the instrument, a linear guiding system based on a double flexible blade arrangement has been selected. The four different slits to be used for the SPICE instrument resulted in a total stroke of 16.5 mm in this linear slit changer arrangement. The combination of long stroke and high precision positioning requirements has been identified as the main design challenge to be validated through breadboard models testing. This paper presents the development of SPICE's Slit Change Mechanism (SCM) and the two-step validation tests successfully performed on breadboard models of its flexible blade support system. The validation test results have demonstrated the full adequacy of the flexible blade guiding system implemented in SPICE's Slit Change Mechanism in a stand-alone configuration. Further breadboard test results, studying the influence of the compliant connection to the SCM linear actuator on an enhanced flexible guiding system design have shown significant enhancements in the positioning accuracy and repeatability of the selected flexible guiding system. Preliminary evaluation of the linear actuator design, including a detailed tolerance analyses, has shown the suitability of this satellite roller screw based mechanism for the actuation of the tested flexible guiding system and compliant connection. The presented development and preliminary testing of the high-precision long-stroke Slit Change Mechanism for the SPICE Instrument are considered fully successful such that future tests considering the full Slit Change Mechanism can be performed, with the gained confidence, directly on a Qualification Model. The selected linear Slit Change Mechanism design concept, consisting of a flexible guiding system driven by a hermetically sealed linear drive mechanism, is considered validated for the specific application of the SPICE instrument, with great potential for other special applications where contamination and high precision positioning are dominant design drivers.

WEC-SIM Validation Testing Plan FY14 Q4.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ruehl, Kelley Michelle

2016-02-01

The WEC-Sim project is currently on track, having met both the SNL and NREL FY14 Milestones, as shown in Table 1 and Table 2. This is also reflected in the Gantt chart uploaded to the WEC-Sim SharePoint site in the FY14 Q4 Deliverables folder. The work completed in FY14 includes code verification through code-to-code comparison (FY14 Q1 and Q2), preliminary code validation through comparison to experimental data (FY14 Q2 and Q3), presentation and publication of the WEC-Sim project at OMAE 2014 [1], [2], [3] and GMREC/METS 2014 [4] (FY14 Q3), WEC-Sim code development and public open-source release (FY14 Q3), andmore » development of a preliminary WEC-Sim validation test plan (FY14 Q4). This report presents the preliminary Validation Testing Plan developed in FY14 Q4. The validation test effort started in FY14 Q4 and will go on through FY15. Thus far the team has developed a device selection method, selected a device, and placed a contract with the testing facility, established several collaborations including industry contacts, and have working ideas on the testing details such as scaling, device design, and test conditions.« less

Designing Interactive Electronic Module in Chemistry Lessons

NASA Astrophysics Data System (ADS)

Irwansyah, F. S.; Lubab, I.; Farida, I.; Ramdhani, M. A.

2017-09-01

This research aims to design electronic module (e-module) oriented to the development of students’ chemical literacy on the solution colligative properties material. This research undergoes some stages including concept analysis, discourse analysis, storyboard design, design development, product packaging, validation, and feasibility test. Overall, this research undertakes three main stages, namely, Define (in the form of preliminary studies); Design (designing e-module); Develop (including validation and model trial). The concept presentation and visualization used in this e-module is oriented to chemical literacy skills. The presentation order carries aspects of scientific context, process, content, and attitude. Chemists and multi media experts have done the validation to test the initial quality of the products and give a feedback for the product improvement. The feasibility test results stated that the content presentation and display are valid and feasible to be used with the value of 85.77% and 87.94%. These values indicate that this e-module oriented to students’ chemical literacy skills for the solution colligative properties material is feasible to be used.

Process material management in the Space Station environment

NASA Technical Reports Server (NTRS)

Perry, J. L.; Humphries, W. R.

1988-01-01

The Space Station will provide a unique facility for conducting material-processing and life-science experiments under microgravity conditions. These conditions place special requirements on the U.S. Laboratory for storing and transporting chemicals and process fluids, reclaiming water from selected experiments, treating and storing experiment wastes, and providing vacuum utilities. To meet these needs and provide a safe laboratory environment, the Process Material Management System (PMMS) is being developed. Preliminary design requirements and concepts related to the PMMS are addressed, and the MSFC PMMS breadboard test facility and a preliminary plan for validating the overall system design are discussed.

The opto-mechanical design process: from vision to reality

NASA Astrophysics Data System (ADS)

Kvamme, E. Todd; Stubbs, David M.; Jacoby, Michael S.

2017-08-01

The design process for an opto-mechanical sub-system is discussed from requirements development through test. The process begins with a proper mission understanding and the development of requirements for the system. Preliminary design activities are then discussed with iterative analysis and design work being shared between the design, thermal, and structural engineering personnel. Readiness for preliminary review and the path to a final design review are considered. The value of prototyping and risk mitigation testing is examined with a focus on when it makes sense to execute a prototype test program. System level margin is discussed in general terms, and the practice of trading margin in one area of performance to meet another area is reviewed. Requirements verification and validation is briefly considered. Testing and its relationship to requirements verification concludes the design process.

Numerical simulation of cavitating flows in shipbuilding

NASA Astrophysics Data System (ADS)

Bagaev, D.; Yegorov, S.; Lobachev, M.; Rudnichenko, A.; Taranov, A.

2018-05-01

The paper presents validation of numerical simulations of cavitating flows around different marine objects carried out at the Krylov State Research Centre (KSRC). Preliminary validation was done with reference to international test objects. The main part of the paper contains results of solving practical problems of ship propulsion design. The validation of numerical simulations by comparison with experimental data shows a good accuracy of the supercomputer technologies existing at Krylov State Research Centre for both hydrodynamic and cavitation characteristics prediction.

Development of a Three-Dimensional, Unstructured Material Response Design Tool

NASA Technical Reports Server (NTRS)

Schulz, Joseph C.; Stern, Eric C.; Muppidi, Suman; Palmer, Grant E.; Schroeder, Olivia

2017-01-01

A preliminary verification and validation of a new material response model is presented. This model, Icarus, is intended to serve as a design tool for the thermal protection systems of re-entry vehicles. Currently, the capability of the model is limited to simulating the pyrolysis of a material as a result of the radiative and convective surface heating imposed on the material from the surrounding high enthalpy gas. Since the major focus behind the development of Icarus has been model extensibility, the hope is that additional physics can be quickly added. This extensibility is critical since thermal protection systems are becoming increasing complex, e.g. woven carbon polymers. Additionally, as a three-dimensional, unstructured, finite-volume model, Icarus is capable of modeling complex geometries. In this paper, the mathematical and numerical formulation is presented followed by a discussion of the software architecture and some preliminary verification and validation studies.

Obtaining Valid Safety Data for Software Safety Measurement and Process Improvement

NASA Technical Reports Server (NTRS)

Basili, Victor r.; Zelkowitz, Marvin V.; Layman, Lucas; Dangle, Kathleen; Diep, Madeline

2010-01-01

We report on a preliminary case study to examine software safety risk in the early design phase of the NASA Constellation spaceflight program. Our goal is to provide NASA quality assurance managers with information regarding the ongoing state of software safety across the program. We examined 154 hazard reports created during the preliminary design phase of three major flight hardware systems within the Constellation program. Our purpose was two-fold: 1) to quantify the relative importance of software with respect to system safety; and 2) to identify potential risks due to incorrect application of the safety process, deficiencies in the safety process, or the lack of a defined process. One early outcome of this work was to show that there are structural deficiencies in collecting valid safety data that make software safety different from hardware safety. In our conclusions we present some of these deficiencies.

Development and validation of a nutritional education pamphlet for low literacy pediatric oncology caregivers in Central America.

PubMed

Garcia, Melissa; Chismark, Elisabeth A; Mosby, Terezie; Day, Sara W

2010-12-01

A culturally appropriate nutrition education pamphlet was developed and validated for low-literacy caregivers in Honduras, El Salvador, and Guatemala. The pamphlet was developed after a preliminary survey of pediatric oncology nurses in the 3 countries to assess the need for education materials, caregiver literacy levels, and local eating habits. Experts in nutrition and low-literacy patient education and pediatric oncology nurses validated the pamphlet's content and design. The pamphlet was validated positively and has been circulated to pediatric oncology caregivers in Central America.

Validity of High School Physic Module With Character Values Using Process Skill Approach In STKIP PGRI West Sumatera

NASA Astrophysics Data System (ADS)

Anaperta, M.; Helendra, H.; Zulva, R.

2018-04-01

This study aims to describe the validity of physics module with Character Oriented Values Using Process Approach Skills at Dynamic Electrical Material in high school physics / MA and SMK. The type of research is development research. The module development model uses the development model proposed by Plomp which consists of (1) preliminary research phase, (2) the prototyping phase, and (3) assessment phase. In this research is done is initial investigation phase and designing. Data collecting technique to know validation is observation and questionnaire. In the initial investigative phase, curriculum analysis, student analysis, and concept analysis were conducted. In the design phase and the realization of module design for SMA / MA and SMK subjects in dynamic electrical materials. After that, the formative evaluation which include self evaluation, prototyping (expert reviews, one-to-one, and small group. At this stage validity is performed. This research data is obtained through the module validation sheet, which then generates a valid module.

Preliminary Validation of the Perceived Locus of Causality Scale for Academic Motivation in the Context of University Studies (PLOC-U)

ERIC Educational Resources Information Center

Sánchez de Miguel, Manuel; Lizaso, Izarne; Hermosilla, Daniel; Alcover, Carlos-Maria; Goudas, Marios; Arranz-Freijó, Enrique

2017-01-01

Background: Research has shown that self-determination theory can be useful in the study of motivation in sport and other forms of physical activity. The Perceived Locus of Causality (PLOC) scale was originally designed to study both. Aim: The current research presents and validates the new PLOC-U scale to measure academic motivation in the…

ELISA: a cryocooled 10 GHz oscillator with 10(-15) frequency stability.

PubMed

Grop, S; Bourgeois, P Y; Bazin, N; Kersalé, Y; Rubiola, E; Langham, C; Oxborrow, M; Clapton, D; Walker, S; De Vicente, J; Giordano, V

2010-02-01

This article reports the design, the breadboarding, and the validation of an ultrastable cryogenic sapphire oscillator operated in an autonomous cryocooler. The objective of this project was to demonstrate the feasibility of a frequency stability of 3x10(-15) between 1 and 1000 s for the European Space Agency deep space stations. This represents the lowest fractional frequency instability ever achieved with cryocoolers. The preliminary results presented in this paper validate the design we adopted for the sapphire resonator, the cold source, and the oscillator loop.

A study for active control research and validation using the Total In-Flight Simulator (TIFS) aircraft

NASA Technical Reports Server (NTRS)

Chen, R. T. N.; Daughaday, H.; Andrisani, D., II; Till, R. D.; Weingarten, N. C.

1975-01-01

The results of a feasibility study and preliminary design for active control research and validation using the Total In-Flight Simulator (TIFS) aircraft are documented. Active control functions which can be demonstrated on the TIFS aircraft and the cost of preparing, equipping, and operating the TIFS aircraft for active control technology development are determined. It is shown that the TIFS aircraft is as a suitable test bed for inflight research and validation of many ACT concepts.

Design Equations and Criteria of Orthotropic Composite Panels

DTIC Science & Technology

2013-05-01

33  Appendix A Classical Laminate Theory ( CLT ): ....................................................................... A–1  Appendix...Science London , 1990. NSWCCD-65-TR–2004/16A A–1 Appendix A Classical Laminate Theory ( CLT ): In Section 6 of this report, preliminary design...determined using:  Classical Laminate Theory, CLT , to Predict Equivalent Stiffness Characteristics, First- Ply Strength Note: CLT is valid for

Developing a preliminary ‘never event’ list for general practice using consensus-building methods

PubMed Central

de Wet, Carl; O’Donnell, Catherine; Bowie, Paul

2014-01-01

Background The ‘never event’ concept has been implemented in many acute hospital settings to help prevent serious patient safety incidents. Benefits include increasing awareness of highly important patient safety risks among the healthcare workforce, promoting proactive implementation of preventive measures, and facilitating incident reporting. Aim To develop a preliminary list of never events for general practice. Design and setting Application of a range of consensus-building methods in Scottish and UK general practices. Method A total of 345 general practice team members suggested potential never events. Next, ‘informed’ staff (n =15) developed criteria for defining never events and applied the criteria to create a list of candidate never events. Finally, UK primary care patient safety ‘experts’ (n = 17) reviewed, refined, and validated a preliminary list via a modified Delphi group and by completing a content validity index exercise. Results There were 721 written suggestions received as potential never events. Thematic categorisation reduced this to 38. Five criteria specific to general practice were developed and applied to produce 11 candidate never events. The expert group endorsed a preliminary list of 10 items with a content validity index (CVI) score of >80%. Conclusion A preliminary list of never events was developed for general practice through practitioner experience and consensus-building methods. This is an important first step to determine the potential value of the never event concept in this setting. It is now intended to undertake further testing of this preliminary list to assess its acceptability, feasibility, and potential usefulness as a safety improvement intervention. PMID:24567655

A candidate automated test battery for neuropsychological screening of airmen : design and preliminary validation.

DOT National Transportation Integrated Search

1992-02-01

A panel of the American Medical Association convened by the Federal Aviation Administration recommended that a computerized test of cognitive function be developed that would detect significant cognitive impairments that might otherwise go unrecogniz...

Design process and preliminary psychometric study of a video game to detect cognitive impairment in senior adults.

PubMed

Valladares-Rodriguez, Sonia; Perez-Rodriguez, Roberto; Facal, David; Fernandez-Iglesias, Manuel J; Anido-Rifon, Luis; Mouriño-Garcia, Marcos

2017-01-01

Assessment of episodic memory has been traditionally used to evaluate potential cognitive impairments in senior adults. Typically, episodic memory evaluation is based on personal interviews and pen-and-paper tests. This article presents the design, development and a preliminary validation of a novel digital game to assess episodic memory intended to overcome the limitations of traditional methods, such as the cost of its administration, its intrusive character, the lack of early detection capabilities, the lack of ecological validity, the learning effect and the existence of confounding factors. Our proposal is based on the gamification of the California Verbal Learning Test (CVLT) and it has been designed to comply with the psychometric characteristics of reliability and validity. Two qualitative focus groups and a first pilot experiment were carried out to validate the proposal. A more ecological, non-intrusive and better administrable tool to perform cognitive assessment was developed. Initial evidence from the focus groups and pilot experiment confirmed the developed game's usability and offered promising results insofar its psychometric validity is concerned. Moreover, the potential of this game for the cognitive classification of senior adults was confirmed, and administration time is dramatically reduced with respect to pen-and-paper tests. Additional research is needed to improve the resolution of the game for the identification of specific cognitive impairments, as well as to achieve a complete validation of the psychometric properties of the digital game. Initial evidence show that serious games can be used as an instrument to assess the cognitive status of senior adults, and even to predict the onset of mild cognitive impairments or Alzheimer's disease.

Design process and preliminary psychometric study of a video game to detect cognitive impairment in senior adults

PubMed Central

Perez-Rodriguez, Roberto; Facal, David; Fernandez-Iglesias, Manuel J.; Anido-Rifon, Luis; Mouriño-Garcia, Marcos

2017-01-01

Introduction Assessment of episodic memory has been traditionally used to evaluate potential cognitive impairments in senior adults. Typically, episodic memory evaluation is based on personal interviews and pen-and-paper tests. This article presents the design, development and a preliminary validation of a novel digital game to assess episodic memory intended to overcome the limitations of traditional methods, such as the cost of its administration, its intrusive character, the lack of early detection capabilities, the lack of ecological validity, the learning effect and the existence of confounding factors. Materials and Methods Our proposal is based on the gamification of the California Verbal Learning Test (CVLT) and it has been designed to comply with the psychometric characteristics of reliability and validity. Two qualitative focus groups and a first pilot experiment were carried out to validate the proposal. Results A more ecological, non-intrusive and better administrable tool to perform cognitive assessment was developed. Initial evidence from the focus groups and pilot experiment confirmed the developed game’s usability and offered promising results insofar its psychometric validity is concerned. Moreover, the potential of this game for the cognitive classification of senior adults was confirmed, and administration time is dramatically reduced with respect to pen-and-paper tests. Limitations Additional research is needed to improve the resolution of the game for the identification of specific cognitive impairments, as well as to achieve a complete validation of the psychometric properties of the digital game. Conclusion Initial evidence show that serious games can be used as an instrument to assess the cognitive status of senior adults, and even to predict the onset of mild cognitive impairments or Alzheimer’s disease. PMID:28674661

Development and preliminary evidence for the validity of an instrument assessing implementation of human-factors principles in medication-related decision-support systems—I-MeDeSA

PubMed Central

Zachariah, Marianne; Seidling, Hanna M; Neri, Pamela M; Cresswell, Kathrin M; Duke, Jon; Bloomrosen, Meryl; Volk, Lynn A; Bates, David W

2011-01-01

Background Medication-related decision support can reduce the frequency of preventable adverse drug events. However, the design of current medication alerts often results in alert fatigue and high over-ride rates, thus reducing any potential benefits. Methods The authors previously reviewed human-factors principles for relevance to medication-related decision support alerts. In this study, instrument items were developed for assessing the appropriate implementation of these human-factors principles in drug–drug interaction (DDI) alerts. User feedback regarding nine electronic medical records was considered during the development process. Content validity, construct validity through correlation analysis, and inter-rater reliability were assessed. Results The final version of the instrument included 26 items associated with nine human-factors principles. Content validation on three systems resulted in the addition of one principle (Corrective Actions) to the instrument and the elimination of eight items. Additionally, the wording of eight items was altered. Correlation analysis suggests a direct relationship between system age and performance of DDI alerts (p=0.0016). Inter-rater reliability indicated substantial agreement between raters (κ=0.764). Conclusion The authors developed and gathered preliminary evidence for the validity of an instrument that measures the appropriate use of human-factors principles in the design and display of DDI alerts. Designers of DDI alerts may use the instrument to improve usability and increase user acceptance of medication alerts, and organizations selecting an electronic medical record may find the instrument helpful in meeting their clinicians' usability needs. PMID:21946241

Model-Based Design of Air Traffic Controller-Automation Interaction

NASA Technical Reports Server (NTRS)

Romahn, Stephan; Callantine, Todd J.; Palmer, Everett A.; Null, Cynthia H. (Technical Monitor)

1998-01-01

A model of controller and automation activities was used to design the controller-automation interactions necessary to implement a new terminal area air traffic management concept. The model was then used to design a controller interface that provides the requisite information and functionality. Using data from a preliminary study, the Crew Activity Tracking System (CATS) was used to help validate the model as a computational tool for describing controller performance.

A Multi-Stage Longitudinal Comparative Design Stage II Evaluation of the Changing Lives Program: The Life Course Interview (RDA-LCI)

ERIC Educational Resources Information Center

Arango, Lisa Lewis; Kurtines, William M.; Montgomery, Marilyn J.; Ritchie, Rachel

2008-01-01

The study reported in this article, a Multi-Stage Longitudinal Comparative Design Stage II evaluation conducted as a planned preliminary efficacy evaluation (psychometric evaluation of measures, short-term controlled outcome studies, etc.) of the Changing Lives Program (CLP), provided evidence for the reliability and validity of the qualitative…

Aeroelastic Considerations in the Preliminary Design Aircraft

DTIC Science & Technology

1983-09-01

system for aeroelastic analysis FINDEX- Lockheed’s DMS for matrices and NASTRAN tables FSD- fully stressed design algorithm Lockheed- Lockheed-California...Company MLC- maneuver load control NASA- National Aeronautics and Space Adminstration NASTRAN - structural finite element program developed by NASA...Computer Program Validation All major computing programs (FAMAS, NASTRAN , etc.), except the weight distribution program, the panel sizing and allowable

Construction Of Critical Thinking Skills Test Instrument Related The Concept On Sound Wave

NASA Astrophysics Data System (ADS)

Mabruroh, F.; Suhandi, A.

2017-02-01

This study aimed to construct test instrument of critical thinking skills of high school students related the concept on sound wave. This research using a mixed methods with sequential exploratory design, consists of: 1) a preliminary study; 2) design and review of test instruments. The form of test instruments in essay questions, consist of 18 questions that was divided into 5 indicators and 8 sub-indicators of the critical thinking skills expressed by Ennis, with questions that are qualitative and contextual. Phases of preliminary study include: a) policy studies; b) survey to the school; c) and literature studies. Phases of the design and review of test instruments consist of two steps, namely a draft design of test instruments include: a) analysis of the depth of teaching materials; b) the selection of indicators and sub-indicators of critical thinking skills; c) analysis of indicators and sub-indicators of critical thinking skills; d) implementation of indicators and sub-indicators of critical thinking skills; and e) making the descriptions about the test instrument. In the next phase of the review test instruments, consist of: a) writing about the test instrument; b) validity test by experts; and c) revision of test instruments based on the validator.

Preliminary Structural Sensitivity Study of Hypersonic Inflatable Aerodynamic Decelerator Using Probabilistic Methods

NASA Technical Reports Server (NTRS)

Lyle, Karen H.

2014-01-01

Acceptance of new spacecraft structural architectures and concepts requires validated design methods to minimize the expense involved with technology validation via flighttesting. This paper explores the implementation of probabilistic methods in the sensitivity analysis of the structural response of a Hypersonic Inflatable Aerodynamic Decelerator (HIAD). HIAD architectures are attractive for spacecraft deceleration because they are lightweight, store compactly, and utilize the atmosphere to decelerate a spacecraft during re-entry. However, designers are hesitant to include these inflatable approaches for large payloads or spacecraft because of the lack of flight validation. In the example presented here, the structural parameters of an existing HIAD model have been varied to illustrate the design approach utilizing uncertainty-based methods. Surrogate models have been used to reduce computational expense several orders of magnitude. The suitability of the design is based on assessing variation in the resulting cone angle. The acceptable cone angle variation would rely on the aerodynamic requirements.

Development and preliminary validation of the Parenting around SNAcking Questionnaire (P-SNAQ)

USDA-ARS?s Scientific Manuscript database

Snacking makes significant contributions to children's dietary intake but is poorly understood from a parenting perspective. This research was designed to develop and evaluate the psychometrics of a theoretically grounded, empirically-informed measure of snack parenting. The Parenting around SNAckin...

Development of an Unstructured, Three-Dimensional Material Response Design Tool

NASA Technical Reports Server (NTRS)

Schulz, Joseph; Stern, Eric; Palmer, Grant; Muppidi, Suman; Schroeder, Olivia

2017-01-01

A preliminary verification and validation of a new material response model is presented. This model, Icarus, is intended to serve as a design tool for the thermal protection systems of re-entry vehicles. Currently, the capability of the model is limited to simulating the pyrolysis of a material as a result of the radiative and convective surface heating imposed on the material from the surrounding high enthalpy gas. Since the major focus behind the development of Icarus has been model extensibility, the hope is that additional physics can be quickly added. The extensibility is critical since thermal protection systems are becoming increasing complex, e.g. woven carbon polymers. Additionally, as a three-dimensional, unstructured, finite-volume model, Icarus is capable of modeling complex geometries as well as multi-dimensional physics, which have been shown to be important in some scenarios and are not captured by one-dimensional models. In this paper, the mathematical and numerical formulation is presented followed by a discussion of the software architecture and some preliminary verification and validation studies.

Exoplanet Yield Estimation for Decadal Study Concepts using EXOSIMS

NASA Astrophysics Data System (ADS)

Morgan, Rhonda; Lowrance, Patrick; Savransky, Dmitry; Garrett, Daniel

2016-01-01

The anticipated upcoming large mission study concepts for the direct imaging of exo-earths present an exciting opportunity for exoplanet discovery and characterization. While these telescope concepts would also be capable of conducting a broad range of astrophysical investigations, the most difficult technology challenges are driven by the requirements for imaging exo-earths. The exoplanet science yield for these mission concepts will drive design trades and mission concept comparisons.To assist in these trade studies, the Exoplanet Exploration Program Office (ExEP) is developing a yield estimation tool that emphasizes transparency and consistent comparison of various design concepts. The tool will provide a parametric estimate of science yield of various mission concepts using contrast curves from physics-based model codes and Monte Carlo simulations of design reference missions using realistic constraints, such as solar avoidance angles, the observatory orbit, propulsion limitations of star shades, the accessibility of candidate targets, local and background zodiacal light levels, and background confusion by stars and galaxies. The python tool utilizes Dmitry Savransky's EXOSIMS (Exoplanet Open-Source Imaging Mission Simulator) design reference mission simulator that is being developed for the WFIRST Preliminary Science program. ExEP is extending and validating the tool for future mission concepts under consideration for the upcoming 2020 decadal review. We present a validation plan and preliminary yield results for a point design.

Utilization of an agility assessment module in analysis and optimization of preliminary fighter configuration

NASA Technical Reports Server (NTRS)

Ngan, Angelen; Biezad, Daniel

1996-01-01

A study has been conducted to develop and to analyze a FORTRAN computer code for performing agility analysis on fighter aircraft configurations. This program is one of the modules of the NASA Ames ACSYNT (AirCraft SYNThesis) design code. The background of the agility research in the aircraft industry and a survey of a few agility metrics are discussed. The methodology, techniques, and models developed for the code are presented. The validity of the existing code was evaluated by comparing with existing flight test data. A FORTRAN program was developed for a specific metric, PM (Pointing Margin), as part of the agility module. Example trade studies using the agility module along with ACSYNT were conducted using a McDonnell Douglas F/A-18 Hornet aircraft model. Tile sensitivity of thrust loading, wing loading, and thrust vectoring on agility criteria were investigated. The module can compare the agility potential between different configurations and has capability to optimize agility performance in the preliminary design process. This research provides a new and useful design tool for analyzing fighter performance during air combat engagements in the preliminary design.

Preliminary Structural Design Using Topology Optimization with a Comparison of Results from Gradient and Genetic Algorithm Methods

NASA Technical Reports Server (NTRS)

Burt, Adam O.; Tinker, Michael L.

2014-01-01

In this paper, genetic algorithm based and gradient-based topology optimization is presented in application to a real hardware design problem. Preliminary design of a planetary lander mockup structure is accomplished using these methods that prove to provide major weight savings by addressing the structural efficiency during the design cycle. This paper presents two alternative formulations of the topology optimization problem. The first is the widely-used gradient-based implementation using commercially available algorithms. The second is formulated using genetic algorithms and internally developed capabilities. These two approaches are applied to a practical design problem for hardware that has been built, tested and proven to be functional. Both formulations converged on similar solutions and therefore were proven to be equally valid implementations of the process. This paper discusses both of these formulations at a high level.

Modification and Validation of Conceptual Design Aerodynamic Prediction Method HASC95 With VTXCHN

NASA Technical Reports Server (NTRS)

Albright, Alan E.; Dixon, Charles J.; Hegedus, Martin C.

1996-01-01

A conceptual/preliminary design level subsonic aerodynamic prediction code HASC (High Angle of Attack Stability and Control) has been improved in several areas, validated, and documented. The improved code includes improved methodologies for increased accuracy and robustness, and simplified input/output files. An engineering method called VTXCHN (Vortex Chine) for prediciting nose vortex shedding from circular and non-circular forebodies with sharp chine edges has been improved and integrated into the HASC code. This report contains a summary of modifications, description of the code, user's guide, and validation of HASC. Appendices include discussion of a new HASC utility code, listings of sample input and output files, and a discussion of the application of HASC to buffet analysis.

SRB/SLEEC (Solid Rocket Booster/Shingle Lap Extendible Exit Cone) feasibility study, volume 1

NASA Technical Reports Server (NTRS)

Baker, William H., Jr.

1986-01-01

A preliminary design and analysis was completed for a SLEEC (Shingle Lap Extendible Exit Cone) which could be incorporated on the Space Transportation System (STS) Solid Rocket Booster (SRB). Studies were completed which predicted weights and performance increases and development plans were prepared for the full-scale bench and static test of SLEEC. In conjunction with the design studies, a series of supporting analyses were performed to assure the validity and feasibility of performance, fabrication, cost, and reliability for the selected design. The feasibility and required amounts of bench, static firing, and flight tests considered necessary for the successful incorporation of SLEEC on the Shuttle SRBs were determined. Preliminary plans were completed which define both a follow on study effort and a development program.

Preliminary Results from the AFRL-NASA W/V-Band Terrestrial Link Experiment in Albuquerque, NM

NASA Technical Reports Server (NTRS)

Zemba, Michael; Nessel, James; Houts, Jacquelynne; Tarasenko, Nicholas; Lane, Steven; Murrell, David

2016-01-01

Atmospheric propagation models and the measurements that train them are critical to the design of efficient and effective space-ground links. As communication systems advance to higher frequencies in search of higher data rates and open spectrum, a lack of data at these frequencies necessitates new measurements to properly develop, validate, and refine the models used for link budgeting and system design. In collaboration with the Air Force Research Laboratory (AFRL), NASA Glenn Research Center has deployed the WV-band Terrestrial Link Experiment (WTLE) in Albuquerque, NM to conduct a measurement campaign at 72 and 84 GHz, among the first atmospheric propagation measurements at these frequencies. WTLE has been operational since October 1, 2015, and the system design shall be herein discussed alongside preliminary results and performance.

Performance and Sizing Tool for Quadrotor Biplane Tailsitter UAS

NASA Astrophysics Data System (ADS)

Strom, Eric

The Quadrotor-Biplane-Tailsitter (QBT) configuration is the basis for a mechanically simplistic rotorcraft capable of both long-range, high-speed cruise as well as hovering flight. This work presents the development and validation of a set of preliminary design tools built specifically for this aircraft to enable its further development, including: a QBT weight model, preliminary sizing framework, and vehicle analysis tools. The preliminary sizing tool presented here shows the advantage afforded by QBT designs in missions with aggressive cruise requirements, such as offshore wind turbine inspections, wherein transition from a quadcopter configuration to a QBT allows for a 5:1 trade of battery weight for wing weight. A 3D, unsteady panel method utilizing a nonlinear implementation of the Kutta-Joukowsky condition is also presented as a means of computing aerodynamic interference effects and, through the implementation of rotor, body, and wing geometry generators, is prepared for coupling with a comprehensive rotor analysis package.

NASA 9-Point LDI Code Validation Experiment

NASA Technical Reports Server (NTRS)

Hicks, Yolanda R.; Anderson, Robert C.; Locke, Randy J.

2007-01-01

This presentation highlights the experimental work to date to obtain validation data using a 9-point lean direct injector (LDI) in support of the National Combustion Code. The LDI is designed to supply fuel lean, Jet-A and air directly into the combustor such that the liquid fuel atomizes and mixes rapidly to produce short flame zones and produce low levels of oxides of nitrogen and CO. We present NOx and CO emission results from gas sample data that support that aspect of the design concept. We describe this injector and show high speed movies of selected operating points. We present image-based species maps of OH, fuel, CH and NO obtained using planar laser induced fluorescence and chemiluminescence. We also present preliminary 2-component, axial and vertical, velocity vectors of the air flow obtained using particle image velocimetry and of the fuel drops in a combusting case. For the same combusting case, we show preliminary 3-component velocity vectors obtained using a phase Doppler anemometer. For the fueled, combusting cases especially, we found optical density is a technical concern that must be addressed, but that in general, these preliminary results are promising. All optical-based results confirm that this injector produces short flames, typically on the order of 5- to-7-mm long at typical cruise and high power engine cycle conditions.

Preliminary Design and Implementation of a Method for Validating Evolving ADA Compilers.

DTIC Science & Technology

1983-03-01

Goodenough, John B. "The Ada Compiler Validation Capability," Computer. 14 (6): 57-64 (June 1981). 7. Pressman, Roger S. Software Engineering : A Practi...COMPILERS THESIS Presented to the faculty of the School of Engineering of the Air Force Institute of Technology Air University in Partial Fulfillment...support and encouragement they have given me. ii Contents Page 1. INTRODUCTION 1 1.1 Background -- DoDls Software Problem 1 1.1.1 The proliferation of

Initial design and performance of the near surface unmanned aircraft system sensor suite in support of the GOES-R field campaign

NASA Astrophysics Data System (ADS)

Pearlman, Aaron J.; Padula, Francis; Shao, Xi; Cao, Changyong; Goodman, Steven J.

2016-09-01

One of the main objectives of the Geostationary Operational Environmental Satellite R-Series (GOES-R) field campaign is to validate the SI traceability of the Advanced Baseline Imager. The campaign plans include a feasibility demonstration study for new near surface unmanned aircraft system (UAS) measurement capability that is being developed to meet the challenges of validating geostationary sensors. We report our progress in developing our initial systems by presenting the design and preliminary characterization results of the sensor suite. The design takes advantage of off-the-shelf technologies and fiber-based optical components to make hemispheric directional measurements from a UAS. The characterization results - including laboratory measurements of temperature effects and polarization sensitivity - are used to refine the radiometric uncertainty budget towards meeting the validation objectives for the campaign. These systems will foster improved validation capabilities for the GOES-R field campaign and other next generation satellite systems.

The Alzheimer's Disease Knowledge Scale: Development and Psychometric Properties

ERIC Educational Resources Information Center

Carpenter, Brian D.; Balsis, Steve; Otilingam, Poorni G.; Hanson, Priya K.; Gatz, Margaret

2009-01-01

Purpose: This study provides preliminary evidence for the acceptability, reliability, and validity of the new Alzheimer's Disease Knowledge Scale (ADKS), a content and psychometric update to the Alzheimer's Disease Knowledge Test. Design and Methods: Traditional scale development methods were used to generate items and evaluate their psychometric…

Assessing Critical Thinking in Higher Education: The HEIghten™ Approach and Preliminary Validity Evidence

ERIC Educational Resources Information Center

Liu, Ou Lydia; Mao, Liyang; Frankel, Lois; Xu, Jun

2016-01-01

Critical thinking is a learning outcome highly valued by higher education institutions and the workforce. The Educational Testing Service (ETS) has designed a next generation assessment, the HEIghten™ critical thinking assessment, to measure students' critical thinking skills in analytical and synthetic dimensions. This paper introduces the…

Preliminary Validation of the Motor Skills Rating Scale

ERIC Educational Resources Information Center

Cameron, Claire E.; Chen, Wei-Bing; Blodgett, Julia; Cottone, Elizabeth A.; Mashburn, Andrew J.; Brock, Laura L.; Grissmer, David

2012-01-01

This study examined psychometric properties of the Motor Skills Rating Scale (MSRS), a questionnaire designed for classroom teachers of children in early elementary school. Items were developed with the guidance of two occupational therapists, and factor structure was examined with an exploratory factor analysis (EFA). The resulting model showed…

Reliability Testing Using the Vehicle Durability Simulator

DTIC Science & Technology

2017-11-20

remote parameter control (RPC) software. The software is specifically designed for the data collection, analysis, and simulation processes outlined in...4516. 3. TOP 02-2-505 Inspection and Preliminary Operation of Vehicles, 4 February 1987. 4. Multi-Shaker Test and Control : Design , Test, and...currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) 20-11-2017 2. REPORT

Preliminary validation of the Yale Food Addiction Scale.

PubMed

Gearhardt, Ashley N; Corbin, William R; Brownell, Kelly D

2009-04-01

Previous research has found similarities between addiction to psychoactive substances and excessive food consumption. Further exploration is needed to evaluate the concept of "food addiction," as there is currently a lack of psychometrically validated measurement tools in this area. The current study represents a preliminary exploration of the Yale Food Addiction Scale (YFAS), designed to identify those exhibiting signs of addiction towards certain types of foods (e.g., high fat and high sugar). Survey data were collected from 353 respondents from a stratified random sample of young adults. In addition to the YFAS, the survey assessed eating pathology, alcohol consumption and other health behaviors. The YFAS exhibited adequate internal reliability, and showed good convergent validity with measures of similar constructs and good discriminant validity relative to related but dissimilar constructs. Additionally, the YFAS predicted binge-eating behavior above and beyond existing measures of eating pathology, demonstrating incremental validity. The YFAS is a sound tool for identifying eating patterns that are similar to behaviors seen in classic areas of addiction. Further evaluation of the scale is needed, especially due to a low response rate of 24.5% and a non-clinical sample, but confirmation of the reliability and validity of the scale has the potential to facilitate empirical research on the concept of "food addiction".

VEEP - Vehicle Economy, Emissions, and Performance program

NASA Technical Reports Server (NTRS)

Heimburger, D. A.; Metcalfe, M. A.

1977-01-01

VEEP is a general-purpose discrete event simulation program being developed to study the performance, fuel economy, and exhaust emissions of a vehicle modeled as a collection of its separate components. It is written in SIMSCRIPT II.5. The purpose of this paper is to present the design methodology, describe the simulation model and its components, and summarize the preliminary results. Topics include chief programmer team concepts, the SDDL design language, program portability, user-oriented design, the program's user command syntax, the simulation procedure, and model validation.

A high power ion thruster for deep space missions

NASA Astrophysics Data System (ADS)

Polk, James E.; Goebel, Dan M.; Snyder, John S.; Schneider, Analyn C.; Johnson, Lee K.; Sengupta, Anita

2012-07-01

The Nuclear Electric Xenon Ion System ion thruster was developed for potential outer planet robotic missions using nuclear electric propulsion (NEP). This engine was designed to operate at power levels ranging from 13 to 28 kW at specific impulses of 6000-8500 s and for burn times of up to 10 years. State-of-the-art performance and life assessment tools were used to design the thruster, which featured 57-cm-diameter carbon-carbon composite grids operating at voltages of 3.5-6.5 kV. Preliminary validation of the thruster performance was accomplished with a laboratory model thruster, while in parallel, a flight-like development model (DM) thruster was completed and two DM thrusters fabricated. The first thruster completed full performance testing and a 2000-h wear test. The second successfully completed vibration tests at the full protoflight levels defined for this NEP program and then passed performance validation testing. The thruster design, performance, and the experimental validation of the design tools are discussed in this paper.

A high power ion thruster for deep space missions.

PubMed

Polk, James E; Goebel, Dan M; Snyder, John S; Schneider, Analyn C; Johnson, Lee K; Sengupta, Anita

2012-07-01

The Nuclear Electric Xenon Ion System ion thruster was developed for potential outer planet robotic missions using nuclear electric propulsion (NEP). This engine was designed to operate at power levels ranging from 13 to 28 kW at specific impulses of 6000-8500 s and for burn times of up to 10 years. State-of-the-art performance and life assessment tools were used to design the thruster, which featured 57-cm-diameter carbon-carbon composite grids operating at voltages of 3.5-6.5 kV. Preliminary validation of the thruster performance was accomplished with a laboratory model thruster, while in parallel, a flight-like development model (DM) thruster was completed and two DM thrusters fabricated. The first thruster completed full performance testing and a 2000-h wear test. The second successfully completed vibration tests at the full protoflight levels defined for this NEP program and then passed performance validation testing. The thruster design, performance, and the experimental validation of the design tools are discussed in this paper.

The Work Tasks Motivation Scale for Teachers (WTMST)

ERIC Educational Resources Information Center

Fernet, Claude; Senecal, Caroline; Guay, Frederic; Marsh, Herbert; Dowson, Martin

2008-01-01

The authors developed and validated a measure of teachers' motivation toward specific work tasks: The Work Tasks Motivation Scale for Teachers (WTMST). The WTMST is designed to assess five motivational constructs toward six work tasks (e.g., class preparation, teaching). The authors conducted a preliminary (n = 42) and a main study among…

Technical Adequacy of the Disruptive Behavior Rating Scale-2nd Edition--Self-Report

ERIC Educational Resources Information Center

Erford, Bradley T.; Miller, Emily M.; Isbister, Katherine

2015-01-01

This study provides preliminary analysis of the Disruptive Behavior Rating Scale-2nd Edition--Self-Report, which was designed to screen individuals aged 10 years and older for anxiety and behavior symptoms. Score reliability and internal and external facets of validity were good for a screening-level test.

An Empirical Validation of the Effectiveness of a Computerized Game to Teach Troubleshooting.

ERIC Educational Resources Information Center

Simutis, Zita M.; And Others

Forty-two enlisted men and women with no prior knowledge about electronics maintenance or logic diagrams participated in research designed to collect preliminary data on the training effectiveness of a problem solving computerized game for teaching electronics maintenance. Two games available on the University of Illinois PLATO Computer-Based…

Design and validation of a bimodal MRI-optics endoluminal probe for colorectal cancer diagnosis

NASA Astrophysics Data System (ADS)

Ramgolam, A.; Sablong, R.; Saint-Jalmes, H.; Beuf, O.

2009-07-01

In the light of the bimodal technical innovations put forward in the diagnosis of early stage colorectal cancer, we present a preliminary study based on a first prototype of a high Resolution MRI-Optics probe along with the first tests carried out and the results obtained.

Developing Open-Ended Questions for Surface Area and Volume of Beam

ERIC Educational Resources Information Center

Kurniawan, Henry; Putri, Ratu Ilma Indra; Hartono, Yusuf

2018-01-01

The purpose of this research was to show open-ended questions about surface area and beam volume which valid and practice, have potential effect. This research is research development which consists of two main phases: preliminary phase (preparation phase and problem design) and formative evaluation phase (evaluation and revision phases). The…

Development and Validation of the FYI - A Preliminary Report

ERIC Educational Resources Information Center

Baker, Harley E.; Styer, Jane S.; Harmon, Lenore; Pommerich, Mary

2010-01-01

Developed for the Armed Services Vocational Aptitude Battery (ASVAB) Career Exploration Program, the Find Your Interests (FYI) inventory was designed to help students learn about their career-related interests. The FYI is a 90-item interest inventory based on Holland's (1973, 1985, 1997) widely accepted theory and taxonomy of career choice. The…

A Preliminary Validation of an Instrument to Measure the Degree of Counselor Restrictive-Nonrestrictive Cognitive Orientation

ERIC Educational Resources Information Center

Seay, Thomas A.; Riley, F. Terrill

1975-01-01

Counselor trainees in different phases of a training program designed to produce open and humanistic counselors were compared on the Counselor R Scale. The Rokeach Dogmatism Scale was included for analysis, since it was thought to be a component of the restrictive-nonrestrictive dimension. (Author/BJG)

Development and Validation of a Nutritional Education Pamphlet for Low-Literacy Pediatric Oncology Caregivers in Central America

PubMed Central

Garcia, Melissa; Chismark, Elisabeth A.; Mosby, Terezie; Day, Sara

2013-01-01

Background A culturally appropriate nutrition education pamphlet was developed and validated for low-literacy caregivers in Honduras, El Salvador, and Guatemala. Methods The pamphlet was developed after a preliminary survey of pediatric oncology nurses in the 3 countries to assess the need for education materials, caregiver literacy levels, and local eating habits. Experts in nutrition and low-literacy patient education and nurses validated the pamphlet’s content and design. Results and Conclusions Nurses expressed the need for nutrition-related pamphlets in developing countries. The pamphlet was validated positively by experts and nurses and has been circulated to pediatric oncology caregivers in Central America. PMID:20300913

Thermal-hydraulics Analysis of a Radioisotope-powered Mars Hopper Propulsion System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robert C. O'Brien; Andrew C. Klein; William T. Taitano

Thermal-hydraulics analyses results produced using a combined suite of computational design and analysis codes are presented for the preliminary design of a concept Radioisotope Thermal Rocket (RTR) propulsion system. Modeling of the transient heating and steady state temperatures of the system is presented. Simulation results for propellant blow down during impulsive operation are also presented. The results from this study validate the feasibility of a practical thermally capacitive RTR propulsion system.

Preliminary Development and Validation of the Mindful Student Questionnaire

ERIC Educational Resources Information Center

Renshaw, Tyler L.

2017-01-01

Research validating mindfulness-based interventions with youths and in schools is growing, yet research validating measures of youths' mindfulness in schools has received far less empirical attention. The present study makes the case for and reports on the preliminary development and validation of a new, 15-item, multidimensional, self-report…

Compulsive sexual behavior inventory: a preliminary study of reliability and validity.

PubMed

Coleman, E; Miner, M; Ohlerking, F; Raymond, N

2001-01-01

This preliminary study was designed to develop empirically a scale of compulsive sexual behavior (CSB) and to test its reliability and validity in a sample of individuals with nonparaphilic CSB (N = 15), in a sample of pedophiles (N = 35) in treatment for sexual offending, and in a sample of normal controls (N = 42). Following a factor analysis and a varimax rotation, those items with factor loadings on the rotated factors of greater than .60 were retained. Three factors were identified, which appeared to measure control, abuse, and violence. Cronbach's alphas indicated that the subscales have good reliability. The 28-item scale was then tested for validity by a linear discriminant function analysis. The scale successfully discriminated the nonparaphilic CSB sample and the pedophiles from controls. Further analysis indicated that this scale is a valid measure of CSB in that there were significant differences between the three groups on the control subscale. Pedophiles scored significantly lower than the other two groups on the abuse subscale, with the other two groups not scoring significantly differently from one another. This indicated that pedophiles were more abusive than the nonparaphilic CSB individuals or the controls. Pedophiles scored significantly lower than controls on the violence subscale. Nonparaphilic individuals with compulsive sexual behavior scored slightly lower on the violence subscale, although not significantly different. As a preliminary study, there are several limitations to this study, which should be addressed, in further studies with larger sample sizes.

Advanced Subsonic Technology (AST) 22-Inch Low Noise Research Fan Rig Preliminary Design of ADP-Type Fan 3

NASA Technical Reports Server (NTRS)

Jeracki, Robert J. (Technical Monitor); Topol, David A.; Ingram, Clint L.; Larkin, Michael J.; Roche, Charles H.; Thulin, Robert D.

2004-01-01

This report presents results of the work completed on the preliminary design of Fan 3 of NASA s 22-inch Fan Low Noise Research project. Fan 3 was intended to build on the experience gained from Fans 1 and 2 by demonstrating noise reduction technology that surpasses 1992 levels by 6 dB. The work was performed as part of NASA s Advanced Subsonic Technology (AST) program. Work on this task was conducted in the areas of CFD code validation, acoustic prediction and validation, rotor parametric studies, and fan exit guide vane (FEGV) studies up to the time when a NASA decision was made to cancel the design, fabrication and testing phases of the work. The scope of the program changed accordingly to concentrate on two subtasks: (1) Rig data analysis and CFD code validation and (2) Fan and FEGV optimization studies. The results of the CFD code validation work showed that this tool predicts 3D flowfield features well from the blade trailing edge to about a chord downstream. The CFD tool loses accuracy as the distance from the trailing edge increases beyond a blade chord. The comparisons of noise predictions to rig test data showed that both the tone noise tool and the broadband noise tool demonstrated reasonable agreement with the data to the degree that these tools can reliably be used for design work. The section on rig airflow and inlet separation analysis describes the method used to determine total fan airflow, shows the good agreement of predicted boundary layer profiles to measured profiles, and shows separation angles of attack ranging from 29.5 to 27deg for the range of airflows tested. The results of the rotor parametric studies were significant in leading to the decision not to pursue a new rotor design for Fan 3 and resulted in recommendations to concentrate efforts on FEGV stator designs. The ensuing parametric study on FEGV designs showed the potential for 8 to 10 EPNdB noise reduction relative to the baseline.

Drug designs fulfilling the requirements of clinical trials aiming at personalizing medicine

PubMed Central

Mandrekar, Sumithra J.; Sargent, Daniel J.

2014-01-01

In the current era of stratified medicine and biomarker-driven therapies, the focus has shifted from predictions based on the traditional anatomic staging systems to guide the choice of treatment for an individual patient to an integrated approach using the genetic makeup of the tumor and the genotype of the patient. The clinical trial designs utilized in the developmental pathway for biomarkers and biomarker-directed therapies from discovery to clinical practice are rapidly evolving. While several issues need careful consideration, two critical issues that surround the validation of biomarkers are the choice of the clinical trial design (which is based on the strength of the preliminary evidence and marker prevalence), and biomarker assay related issues surrounding the marker assessment methods such as the reliability and reproducibility of the assay. In this review, we focus on trial designs aiming at personalized medicine in the context of early phase trials for initial marker validation, as well as in the context of larger definitive trials. Designs for biomarker validation are broadly classified as retrospective (i.e., using data from previously well-conducted randomized controlled trials (RCTs) versus prospective (enrichment, all-comers, hybrid or adaptive). We believe that the systematic evaluation and implementation of these design strategies are essential to accelerate the clinical validation of biomarker guided therapy. PMID:25414851

Hovering Dual-Spin Vehicle Groundwork for Bias Momentum Sizing Validation Experiment

NASA Technical Reports Server (NTRS)

Rothhaar, Paul M.; Moerder, Daniel D.; Lim, Kyong B.

2008-01-01

Angular bias momentum offers significant stability augmentation for hovering flight vehicles. The reliance of the vehicle on thrust vectoring for agility and disturbance rejection is greatly reduced with significant levels of stored angular momentum in the system. A methodical procedure for bias momentum sizing has been developed in previous studies. This current study provides groundwork for experimental validation of that method using an experimental vehicle called the Dual-Spin Test Device, a thrust-levitated platform. Using measured data the vehicle's thrust vectoring units are modeled and a gust environment is designed and characterized. Control design is discussed. Preliminary experimental results of the vehicle constrained to three rotational degrees of freedom are compared to simulation for a case containing no bias momentum to validate the simulation. A simulation of a bias momentum dominant case is presented.

Initial development and preliminary validation of a new negative symptom measure: the Clinical Assessment Interview for Negative Symptoms (CAINS).

PubMed

Forbes, Courtney; Blanchard, Jack J; Bennett, Melanie; Horan, William P; Kring, Ann; Gur, Raquel

2010-12-01

As part of an ongoing scale development process, this study provides an initial examination of the psychometric properties and validity of a new interview-based negative symptom instrument, the Clinical Assessment Interview for Negative Symptoms (CAINS), in outpatients with schizophrenia or schizoaffective disorder (N = 37). The scale was designed to address limitations of existing measures and to comprehensively assess five consensus-based negative symptoms: asociality, avolition, anhedonia (consummatory and anticipatory), affective flattening, and alogia. Results indicated satisfactory internal consistency reliability for the total CAINS scale score and promising inter-rater agreement, with clear areas identified in need of improvement. Convergent validity was evident in general agreement between the CAINS and alternative negative symptom measures. Further, CAINS subscales significantly correlated with relevant self-report emotional experience measures as well as with social functioning. Discriminant validity of the CAINS was strongly supported by its small, non-significant relations with positive symptoms, general psychiatric symptoms, and depression. These preliminary data on an early beta-version of the CAINS provide initial support for this new assessment approach to negative symptoms and suggest directions for further scale development. Copyright © 2010 Elsevier B.V. All rights reserved.

Sonic Boom Research at NASA Dryden: Objectives and Flight Results from the Lift and Nozzle Change Effects on Tail Shock (LaNCETS) Project

NASA Technical Reports Server (NTRS)

Moes, Timothy R.

2009-01-01

The principal objective of the Supersonics Project is to develop and validate multidisciplinary physics-based predictive design, analysis and optimization capabilities for supersonic vehicles. For aircraft, the focus will be on eliminating the efficiency, environmental and performance barriers to practical supersonic flight. Previous flight projects found that a shaped sonic boom could propagate all the way to the ground (F-5 SSBD experiment) and validated design tools for forebody shape modifications (F-5 SSBD and Quiet Spike experiments). The current project, Lift and Nozzle Change Effects on Tail Shock (LaNCETS) seeks to obtain flight data to develop and validate design tools for low-boom tail shock modifications. Attempts will be made to alter the shock structure of NASA's NF-15B TN/837 by changing the lift distribution by biasing the canard positions, changing the plume shape by under- and over-expanding the nozzles, and changing the plume shape using thrust vectoring. Additional efforts will measure resulting shocks with a probing aircraft (F-15B TN/836) and use the results to validate and update predictive tools. Preliminary flight results are presented and are available to provide truth data for developing and validating the CFD tools required to design low-boom supersonic aircraft.

The Inclusive Classroom Profile (ICP) Preliminary Findings of Demonstration Study in North Carolina

ERIC Educational Resources Information Center

Soukakou, E.; Winton, P.; West, T.

2012-01-01

The Inclusive Classroom Profile (ICP) was developed in response to a lack of validated instruments designed specifically to measure the quality of inclusive practices, and it is based on research evidence on the effectiveness of specialized instructional strategies for meeting the individual needs of children in inclusive settings (Odom, 2004;…

Developing a new industrial engineering curriculum using a systems engineering approach

NASA Astrophysics Data System (ADS)

Buyurgan, Nebil; Kiassat, Corey

2017-11-01

This paper reports on the development of an engineering curriculum for a new industrial engineering programme at a medium-sized private university in the northeast United States. A systems engineering process has been followed to design and develop the new curriculum. Considering the programme curriculum as a system, first the stakeholders have been identified, and some preliminary analysis on their needs and requirements has been conducted. Following that, the phases of conceptual design, preliminary design, and detailed design have been pursued during which different levels of validation, assessment, and evaluation processes have been utilised. In addition, a curriculum assessment and continuous improvement process have been developed to assess the curriculum and the courses frequently. The resulting curriculum is flexible, allowing the pursuit of accelerated graduate programmes, a second major, various minor options, and study-abroad; relevant, tailored to the needs of industry partners in the vicinity; and practical, providing hands-on education, resulting in employment-ready graduates.

Development of syntax of intuition-based learning model in solving mathematics problems

NASA Astrophysics Data System (ADS)

Yeni Heryaningsih, Nok; Khusna, Hikmatul

2018-01-01

The aim of the research was to produce syntax of Intuition Based Learning (IBL) model in solving mathematics problem for improving mathematics students’ achievement that valid, practical and effective. The subject of the research were 2 classes in grade XI students of SMAN 2 Sragen, Central Java. The type of the research was a Research and Development (R&D). Development process adopted Plomp and Borg & Gall development model, they were preliminary investigation step, design step, realization step, evaluation and revision step. Development steps were as follow: (1) Collected the information and studied of theories in Preliminary Investigation step, studied about intuition, learning model development, students condition, and topic analysis, (2) Designed syntax that could bring up intuition in solving mathematics problem and then designed research instruments. They were several phases that could bring up intuition, Preparation phase, Incubation phase, Illumination phase and Verification phase, (3) Realized syntax of Intuition Based Learning model that has been designed to be the first draft, (4) Did validation of the first draft to the validator, (5) Tested the syntax of Intuition Based Learning model in the classrooms to know the effectiveness of the syntax, (6) Conducted Focus Group Discussion (FGD) to evaluate the result of syntax model testing in the classrooms, and then did the revision on syntax IBL model. The results of the research were produced syntax of IBL model in solving mathematics problems that valid, practical and effective. The syntax of IBL model in the classroom were, (1) Opening with apperception, motivations and build students’ positive perceptions, (2) Teacher explains the material generally, (3) Group discussion about the material, (4) Teacher gives students mathematics problems, (5) Doing exercises individually to solve mathematics problems with steps that could bring up students’ intuition: Preparations, Incubation, Illumination, and Verification, (6) Closure with the review of students have learned or giving homework.

Participatory design of a preliminary safety checklist for general practice

PubMed Central

Bowie, Paul; Ferguson, Julie; MacLeod, Marion; Kennedy, Susan; de Wet, Carl; McNab, Duncan; Kelly, Moya; McKay, John; Atkinson, Sarah

2015-01-01

Background The use of checklists to minimise errors is well established in high reliability, safety-critical industries. In health care there is growing interest in checklists to standardise checking processes and ensure task completion, and so provide further systemic defences against error and patient harm. However, in UK general practice there is limited experience of safety checklist use. Aim To identify workplace hazards that impact on safety, health and wellbeing, and performance, and codesign a standardised checklist process. Design and setting Application of mixed methods to identify system hazards in Scottish general practices and develop a safety checklist based on human factors design principles. Method A multiprofessional ‘expert’ group (n = 7) and experienced front-line GPs, nurses, and practice managers (n = 18) identified system hazards and developed and validated a preliminary checklist using a combination of literature review, documentation review, consensus building workshops using a mini-Delphi process, and completion of content validity index exercise. Results A prototype safety checklist was developed and validated consisting of six safety domains (for example, medicines management), 22 sub-categories (for example, emergency drug supplies) and 78 related items (for example, stock balancing, secure drug storage, and cold chain temperature recording). Conclusion Hazards in the general practice work system were prioritised that can potentially impact on the safety, health and wellbeing of patients, GP team members, and practice performance, and a necessary safety checklist prototype was designed. However, checklist efficacy in improving safety processes and outcomes is dependent on user commitment, and support from leaders and promotional champions. Although further usability development and testing is necessary, the concept should be of interest in the UK and internationally. PMID:25918338

Preliminary Validation of the Small Aircraft Transportation System Higher Volume Operations (SATS HVO) Concept

NASA Technical Reports Server (NTRS)

Williams, Daniel; Consiglio, Maria; Murdoch, Jennifer; Adams, Catherine

2004-01-01

This document provides a preliminary validation of the Small Aircraft Transportation System (SATS) Higher Volume Operations (HVO) concept for normal conditions. Initial results reveal that the concept provides reduced air traffic delays when compared to current operations without increasing pilot workload. Characteristic to the SATS HVO concept is the establishment of a newly defined area of flight operations called a Self-Controlled Area (SCA) which would be activated by air traffic control (ATC) around designated non-towered, non-radar airports. During periods of poor visibility, SATS pilots would take responsibility for separation assurance between their aircraft and other similarly equipped aircraft in the SCA. Using onboard equipment and simple instrument flight procedures, they would then be better able to approach and land at the airport or depart from it. This concept would also require a new, ground-based automation system, typically located at the airport that would provide appropriate sequencing information to the arriving aircraft. Further validation of the SATS HVO concept is required and is the subject of ongoing research and subsequent publications.

Multi-institutional validation of a web-based core competency assessment system.

PubMed

Tabuenca, Arnold; Welling, Richard; Sachdeva, Ajit K; Blair, Patrice G; Horvath, Karen; Tarpley, John; Savino, John A; Gray, Richard; Gulley, Julie; Arnold, Teresa; Wolfe, Kevin; Risucci, Donald A

2007-01-01

The Association of Program Directors in Surgery and the Division of Education of the American College of Surgeons developed and implemented a web-based system for end-of-rotation faculty assessment of ACGME core competencies of residents. This study assesses its reliability and validity across multiple programs. Each assessment included ratings (1-5 scale) on 23 items reflecting the 6 core competencies. A total of 4241 end-of-rotation assessments were completed for 332 general surgery residents (> or =5 evaluations each) at 5 sites during the 2004-2005 and 2005-2006 academic years. The mean rating for each resident on each item was computed for each academic year. The mean rating of items representing each competency was computed for each resident. Additional data included USMLE and ABSITE scores, PGY, and status in program (categorical, designated preliminary, and undesignated preliminary). Coefficient alpha was greater than 0.90 for each competency score. Mean ratings for each competency increased significantly (p < 0.01) as a function of PGY. Mean ratings for professionalism and interpersonal/communication skills (IPC) were significantly higher than all other competencies at all PGY levels. Competency ratings of PGY 1 residents correlated significantly with USMLE Step I, ranging from (r = 0.26, p < 0.01) for Professionalism to (r = 0.41, p < 0.001) for Systems-Based Practice. Ratings of Knowledge (r = 0.31, p < 0.01), Practice-Based Learning & Improvement (PBLI; r = 0.22, p < 0.05), and Systems-Based Practice (r = 0.20, p < 0.05) correlated significantly with 2005 ABSITE Total Percentile. Ratings of all competencies correlated significantly with the 2006 ABSITE Total Percentile Score (range: r = 0.20, p < 0.05 for professionalism to r = 0.35, p < 0.001 for knowledge). Categorical and designated preliminary residents received significantly higher ratings (p < 0.05) than nondesignated preliminaries for knowledge, patient care, PBLI, and systems-based practice only. Faculty ratings of core competencies are internally consistent. The pattern of statistically significant correlations between competency ratings and USMLE and ABSITE scores supports the postdictive and concurrent validity, respectively, of faculty perceptions of resident knowledge. The pattern of increased ratings as a function of PGY supports the construct validity of faculty ratings of resident core competencies.

Optimizing Parameters of Axial Pressure-Compounded Ultra-Low Power Impulse Turbines at Preliminary Design

NASA Astrophysics Data System (ADS)

Kalabukhov, D. S.; Radko, V. M.; Grigoriev, V. A.

2018-01-01

Ultra-low power turbine drives are used as energy sources in auxiliary power systems, energy units, terrestrial, marine, air and space transport within the confines of shaft power N td = 0.01…10 kW. In this paper we propose a new approach to the development of surrogate models for evaluating the integrated efficiency of multistage ultra-low power impulse turbine with pressure stages. This method is based on the use of existing mathematical models of ultra-low power turbine stage efficiency and mass. It has been used in a method for selecting the rational parameters of two-stage axial ultra-low power turbine. The article describes the basic features of an algorithm for two-stage turbine parameters optimization and for efficiency criteria evaluating. Pledged mathematical models are intended for use at the preliminary design of turbine drive. The optimization method was tested at preliminary design of an air starter turbine. Validation was carried out by comparing the results of optimization calculations and numerical gas-dynamic simulation in the Ansys CFX package. The results indicate a sufficient accuracy of used surrogate models for axial two-stage turbine parameters selection

Design, development and first validation of a transcoding system from ICD-9-CM to ICD-10 in the IT.DRG Italian project.

PubMed

Della Mea, Vincenzo; Vuattolo, Omar; Frattura, Lucilla; Munari, Flavia; Verdini, Eleonora; Zanier, Loris; Arcangeli, Laura; Carle, Flavia

2015-01-01

In Italy, ICD-9-CM is currently used for coding health conditions at hospital discharge, but ICD-10 is being introduced thanks to the IT-DRG Project. In this project, one needed component is a set of transcoding rules and associated tools for easing coders work in the transition. The present paper illustrates design and development of those transcoding rules, and their preliminary testing on a subset of Italian hospital discharge data.

Thermal management of closed computer modules utilizing high density circuitry. [in Airborne Information Management System

NASA Technical Reports Server (NTRS)

Hoadley, A. W.; Porter, A. J.

1990-01-01

This paper presents data on a preliminary analysis of the thermal dynamic characteristics of the Airborne Information Management System (AIMS), which is a continuing design project at NASA Dryden. The analysis established the methods which will be applied to the actual AIMS boards as they become available. The paper also describes the AIMS liquid cooling system design and presents a thermodynamic computer model of the AIMS cooling system, together with an experimental validation of this model.

Design of a symmetry controller for cycling induced by electrical stimulation: preliminary results on post-acute stroke patients.

PubMed

Ambrosini, Emilia; Ferrante, Simona; Schauer, Thomas; Ferrigno, Giancarlo; Molteni, Franco; Pedrocchi, Alessandra

2010-08-01

This study deals with the design of a controller for cycling induced by functional electrical stimulation. The controller will be exploitable in the rehabilitation of hemiparetic patients who need to recover motor symmetry. It uses the pulse width as the control variable in the stimulation of the two legs in order to nullify the unbalance between the torques produced at the two crank arms. It was validated by means of isokinetic trials performed both by healthy subjects and stroke patients. The results showed that the controller was able to reach, and then maintain, a symmetrical pedaling. In the future, the controller will be validated on a larger number of stroke patients.

Verification and Validation of Requirements on the CEV Parachute Assembly System Using Design of Experiments

NASA Technical Reports Server (NTRS)

Schulte, Peter Z.; Moore, James W.

2011-01-01

The Crew Exploration Vehicle Parachute Assembly System (CPAS) project conducts computer simulations to verify that flight performance requirements on parachute loads and terminal rate of descent are met. Design of Experiments (DoE) provides a systematic method for variation of simulation input parameters. When implemented and interpreted correctly, a DoE study of parachute simulation tools indicates values and combinations of parameters that may cause requirement limits to be violated. This paper describes one implementation of DoE that is currently being developed by CPAS, explains how DoE results can be interpreted, and presents the results of several preliminary studies. The potential uses of DoE to validate parachute simulation models and verify requirements are also explored.

The power induced effects module: A FORTRAN code which estimates lift increments due to power induced effects for V/STOL flight

NASA Technical Reports Server (NTRS)

Sandlin, Doral R.; Howard, Kipp E.

1991-01-01

A user friendly FORTRAN code that can be used for preliminary design of V/STOL aircraft is described. The program estimates lift increments, due to power induced effects, encountered by aircraft in V/STOL flight. These lift increments are calculated using empirical relations developed from wind tunnel tests and are due to suckdown, fountain, ground vortex, jet wake, and the reaction control system. The code can be used as a preliminary design tool along with NASA Ames' Aircraft Synthesis design code or as a stand-alone program for V/STOL aircraft designers. The Power Induced Effects (PIE) module was validated using experimental data and data computed from lift increment routines. Results are presented for many flat plate models along with the McDonnell Aircraft Company's MFVT (mixed flow vectored thrust) V/STOL preliminary design and a 15 percent scale model of the YAV-8B Harrier V/STOL aircraft. Trends and magnitudes of lift increments versus aircraft height above the ground were predicted well by the PIE module. The code also provided good predictions of the magnitudes of lift increments versus aircraft forward velocity. More experimental results are needed to determine how well the code predicts lift increments as they vary with jet deflection angle and angle of attack. The FORTRAN code is provided in the appendix.

Markov Chains For Testing Redundant Software

NASA Technical Reports Server (NTRS)

White, Allan L.; Sjogren, Jon A.

1990-01-01

Preliminary design developed for validation experiment that addresses problems unique to assuring extremely high quality of multiple-version programs in process-control software. Approach takes into account inertia of controlled system in sense it takes more than one failure of control program to cause controlled system to fail. Verification procedure consists of two steps: experimentation (numerical simulation) and computation, with Markov model for each step.

Specification and Preliminary Validation of IAT (Integrated Analysis Techniques) Methods: Executive Summary.

DTIC Science & Technology

1985-03-01

conceptual framwork , and preliminary validation of IAT concepts. Planned work for FY85, including more extensive validation, is also described. 20...Developments: Required Capabilities .... ......... 10 2-1 IAT Conceptual Framework - FY85 (FEO) ..... ........... 11 2-2 Recursive Nature of Decomposition...approach: 1) Identify needs & requirements for IAT. 2) Develop IAT conceptual framework. 3) Validate IAT methods. 4) Develop applications materials. To

Aerodynamic Design and Numerical Analysis of Supersonic Turbine for Turbo Pump

NASA Astrophysics Data System (ADS)

Fu, Chao; Zou, Zhengping; Kong, Qingguo; Cheng, Honggui; Zhang, Weihao

2016-09-01

Supersonic turbine is widely used in the turbo pump of modern rocket. A preliminary design method for supersonic turbine has been developed considering the coupling effects of turbine and nozzle. Numerical simulation has been proceeded to validate the feasibility of the design method. As the strong shockwave reflected on the mixing plane, additional numerical simulated error would be produced by the mixing plane model in the steady CFD. So unsteady CFD is employed to investigate the aerodynamic performance of the turbine and flow field in passage. Results showed that the preliminary design method developed in this paper is suitable for designing supersonic turbine. This periodical variation of complex shockwave system influences the development of secondary flow, wake and shock-boundary layer interaction, which obviously affect the secondary loss in vane passage. The periodical variation also influences the strength of reflecting shockwave, which affects the profile loss in vane passage. Besides, high circumferential velocity at vane outlet and short blade lead to high radial pressure gradient, which makes the low kinetic energy fluid moves towards hub region and produces additional loss.

Goals and Status of the NASA Juncture Flow Experiment

NASA Technical Reports Server (NTRS)

Rumsey, Christopher L.; Morrison, Joseph H.

2016-01-01

The NASA Juncture Flow experiment is a new effort whose focus is attaining validation data in the juncture region of a wing-body configuration. The experiment is designed specifically for the purpose of CFD validation. Current turbulence models routinely employed by Reynolds-averaged Navier-Stokes CFD are inconsistent in their prediction of corner flow separation in aircraft juncture regions, so experimental data in the near-wall region of such a configuration will be useful both for assessment as well as for turbulence model improvement. This paper summarizes the Juncture Flow effort to date, including preliminary risk-reduction experiments already conducted and planned future experiments. The requirements and challenges associated with conducting a quality validation test are discussed.

Rehabilitative Soft Exoskeleton for Rodents.

PubMed

Florez, Juan Manuel; Shah, Manan; Moraud, Eduardo Martin; Wurth, Sophie; Baud, Laetitia; Von Zitzewitz, Joachim; van den Brand, Rubia; Micera, Silvestro; Courtine, Gregoire; Paik, Jamie

2017-02-01

Robotic exoskeletons provide programmable, consistent and controllable active therapeutic assistance to patients with neurological disorders. Here we introduce a prototype and preliminary experimental evaluation of a rehabilitative gait exoskeleton that enables compliant yet effective manipulation of the fragile limbs of rats. To assist the displacements of the lower limbs without impeding natural gait movements, we designed and fabricated soft pneumatic actuators (SPAs). The exoskeleton integrates two customizable SPAs that are attached to a limb. This configuration enables a 1 N force load, a range of motion exceeding 80 mm in the major axis, and speed of actuation reaching two gait cycles/s. Preliminary experiments in rats with spinal cord injury validated the basic features of the exoskeleton. We propose strategies to improve the performance of the robot and discuss the potential of SPAs for the design of other wearable interfaces.

Environmental literacy with green chemistry oriented in 21st century learning

NASA Astrophysics Data System (ADS)

Mitarlis, Ibnu, Suhadi; Rahayu, Sri; Sutrisno

2017-12-01

The aim of this study is to analyze the design of chemistry subject with green chemistry oriented to improve students' environmental literacy as one of the important requirements of 21st century learning. This research used R&D design which consisted of four stages, i.e. preliminary study, the study of literature, development of materials, and expert and empirical validation. This article presents the results of preliminary study and the study of literature. It can be concluded from the results of an analysis that environmental literacy is one of the important components of learning outcomes which should be pursued in 21st century teaching. Philosophy of green chemistry plays an important role to reduce and prevent pollution of environment. Principles of green chemistry can be integrated into learning environment as learning outcomes or nurturant effects of learning.

Early Results from the Advanced Radiation Protection Thick GCR Shielding Project

NASA Technical Reports Server (NTRS)

Norman, Ryan B.; Clowdsley, Martha; Slaba, Tony; Heilbronn, Lawrence; Zeitlin, Cary; Kenny, Sean; Crespo, Luis; Giesy, Daniel; Warner, James; McGirl, Natalie;

Development and validation of the Alcohol Myopia Scale.

PubMed

Lac, Andrew; Berger, Dale E

2013-09-01

Alcohol myopia theory conceptualizes the ability of alcohol to narrow attention and how this demand on mental resources produces the impairments of self-inflation, relief, and excess. The current research was designed to develop and validate a scale based on this framework. People who were alcohol users rated items representing myopic experiences arising from drinking episodes in the past month. In Study 1 (N = 260), the preliminary 3-factor structure was supported by exploratory factor analysis. In Study 2 (N = 289), the 3-factor structure was substantiated with confirmatory factor analysis, and it was superior in fit to an empirically indefensible 1-factor structure. The final 14-item scale was evaluated with internal consistency reliability, discriminant validity, convergent validity, criterion validity, and incremental validity. The alcohol myopia scale (AMS) illuminates conceptual underpinnings of this theory and yields insights for understanding the tunnel vision that arises from intoxication.

Preliminary Validation of the Child Abuse Potential Inventory in Turkey

ERIC Educational Resources Information Center

Kutsal, Ebru; Pasli, Figen; Isikli, Sedat; Sahin, Figen; Yilmaz, Gokce; Beyazova, Ufuk

2011-01-01

This study aims to provide preliminary findings on the validity of Child Abuse Potential Inventory (CAP Inventory) on Turkish sample of 23 abuser and 47 nonabuser parents. To investigate validity in two groups, Minnesota Multiphasic Personality Inventory (MMPI) Psychopathic Deviate (MMPI-PD) scale is also used along with CAP. The results show…

Big Data in Designing Clinical Trials: Opportunities and Challenges

PubMed Central

Mayo, Charles S.; Matuszak, Martha M.; Schipper, Matthew J.; Jolly, Shruti; Hayman, James A.; Ten Haken, Randall K.

2017-01-01

Emergence of big data analytics resource systems (BDARSs) as a part of routine practice in Radiation Oncology is on the horizon. Gradually, individual researchers, vendors, and professional societies are leading initiatives to create and demonstrate use of automated systems. What are the implications for design of clinical trials, as these systems emerge? Gold standard, randomized controlled trials (RCTs) have high internal validity for the patients and settings fitting constraints of the trial, but also have limitations including: reproducibility, generalizability to routine practice, infrequent external validation, selection bias, characterization of confounding factors, ethics, and use for rare events. BDARS present opportunities to augment and extend RCTs. Preliminary modeling using single- and muti-institutional BDARS may lead to better design and less cost. Standardizations in data elements, clinical processes, and nomenclatures used to decrease variability and increase veracity needed for automation and multi-institutional data pooling in BDARS also support ability to add clinical validation phases to clinical trial design and increase participation. However, volume and variety in BDARS present other technical, policy, and conceptual challenges including applicable statistical concepts, cloud-based technologies. In this summary, we will examine both the opportunities and the challenges for use of big data in design of clinical trials. PMID:28913177

Big Data in Designing Clinical Trials: Opportunities and Challenges.

PubMed

Mayo, Charles S; Matuszak, Martha M; Schipper, Matthew J; Jolly, Shruti; Hayman, James A; Ten Haken, Randall K

2017-01-01

Emergence of big data analytics resource systems (BDARSs) as a part of routine practice in Radiation Oncology is on the horizon. Gradually, individual researchers, vendors, and professional societies are leading initiatives to create and demonstrate use of automated systems. What are the implications for design of clinical trials, as these systems emerge? Gold standard, randomized controlled trials (RCTs) have high internal validity for the patients and settings fitting constraints of the trial, but also have limitations including: reproducibility, generalizability to routine practice, infrequent external validation, selection bias, characterization of confounding factors, ethics, and use for rare events. BDARS present opportunities to augment and extend RCTs. Preliminary modeling using single- and muti-institutional BDARS may lead to better design and less cost. Standardizations in data elements, clinical processes, and nomenclatures used to decrease variability and increase veracity needed for automation and multi-institutional data pooling in BDARS also support ability to add clinical validation phases to clinical trial design and increase participation. However, volume and variety in BDARS present other technical, policy, and conceptual challenges including applicable statistical concepts, cloud-based technologies. In this summary, we will examine both the opportunities and the challenges for use of big data in design of clinical trials.

Participatory Design of an Integrated Information System Design to Support Public Health Nurses and Nurse Managers

PubMed Central

Reeder, Blaine; Hills, Rebecca A.; Turner, Anne M.; Demiris, George

2014-01-01

Objectives The objectives of the study were to use persona-driven and scenario-based design methods to create a conceptual information system design to support public health nursing. Design and Sample We enrolled 19 participants from two local health departments to conduct an information needs assessment, create a conceptual design, and conduct a preliminary design validation. Measures Interviews and thematic analysis were used to characterize information needs and solicit design recommendations from participants. Personas were constructed from participant background information, and scenario-based design was used to create a conceptual information system design. Two focus groups were conducted as a first iteration validation of information needs, personas, and scenarios. Results Eighty-nine information needs were identified. Two personas and 89 scenarios were created. Public health nurses and nurse managers confirmed the accuracy of information needs, personas, scenarios, and the perceived usefulness of proposed features of the conceptual design. Design artifacts were modified based on focus group results. Conclusion Persona-driven design and scenario-based design are feasible methods to design for common work activities in different local health departments. Public health nurses and nurse managers should be engaged in the design of systems that support their work. PMID:24117760

Reliability and preliminary evidence of validity of a Farsi version of the depression anxiety stress scales.

PubMed

Bayani, Ali Asghar

2010-08-01

The internal consistency, test-retest reliability, and construct validity of the Farsi version of the Depression Anxiety Stress Scales were examined, with a sample of 306 undergraduate students (123 men, 183 women) ranging from 18 to 51 years of age (M age = 25.4, SD = 6.1). Participants completed the Satisfaction with Life Scale, Rosenberg Self-esteem Scale, and the Depression Anxiety Stress Scales. The findings confirmed the preliminary reliabilities and preliminary construct validity of the Farsi translation of the Depression Anxiety Stress Scales.

Participatory design of an integrated information system design to support public health nurses and nurse managers.

PubMed

Reeder, Blaine; Hills, Rebecca A; Turner, Anne M; Demiris, George

2014-01-01

The objectives of the study were to use persona-driven and scenario-based design methods to create a conceptual information system design to support public health nursing. We enrolled 19 participants from two local health departments to conduct an information needs assessment, create a conceptual design, and conduct a preliminary design validation. Interviews and thematic analysis were used to characterize information needs and solicit design recommendations from participants. Personas were constructed from participant background information, and scenario-based design was used to create a conceptual information system design. Two focus groups were conducted as a first iteration validation of information needs, personas, and scenarios. Eighty-nine information needs were identified. Two personas and 89 scenarios were created. Public health nurses and nurse managers confirmed the accuracy of information needs, personas, scenarios, and the perceived usefulness of proposed features of the conceptual design. Design artifacts were modified based on focus group results. Persona-driven design and scenario-based design are feasible methods to design for common work activities in different local health departments. Public health nurses and nurse managers should be engaged in the design of systems that support their work. © 2013 Wiley Periodicals, Inc.

The Parent Trauma Response Questionnaire (PTRQ): development and preliminary validation.

PubMed

Williamson, Victoria; Hiller, Rachel M; Meiser-Stedman, Richard; Creswell, Cathy; Dalgleish, Tim; Fearon, Pasco; Goodall, Ben; McKinnon, Anna; Smith, Patrick; Wright, Isobel; Halligan, Sarah L

2018-01-01

Background : Following a child's experience of trauma, parental response is thought to play an important role in either facilitating or hindering their psychological adjustment. However, the ability to investigate the role of parenting responses in the post-trauma period has been hampered by a lack of valid and reliable measures. Objectives : The aim of this study was to design, and provide a preliminary validation of, the Parent Trauma Response Questionnaire (PTRQ), a self-report measure of parental appraisals and support for children's coping, in the aftermath of child trauma. Methods : We administered an initial set of 78 items to 365 parents whose children, aged 2-19 years, had experienced a traumatic event. We conducted principal axis factoring and then assessed the validity of the reduced measure against a standardized general measure of parental overprotection and via the measure's association with child post-trauma mental health. Results : Factor analysis generated three factors assessing parental maladaptive appraisals: (i) permanent change/damage, (ii) preoccupation with child's vulnerability, and (iii) self-blame. In addition, five factors were identified that assess parental support for child coping: (i) behavioural avoidance, (ii) cognitive avoidance, (iii) overprotection, (iv) maintaining pre-trauma routines, and (v) approach coping. Good validity was evidenced against the measure of parental overprotection and child post-traumatic stress symptoms. Good test-retest reliability of the measure was also demonstrated. Conclusions : The PTRQ is a valid and reliable self-report assessment of parenting cognitions and coping in the aftermath of child trauma.

A Comprehensive Robust Adaptive Controller for Gust Load Alleviation

PubMed Central

Quagliotti, Fulvia

2014-01-01

The objective of this paper is the implementation and validation of an adaptive controller for aircraft gust load alleviation. The contribution of this paper is the design of a robust controller that guarantees the reduction of the gust loads, even when the nominal conditions change. Some preliminary results are presented, considering the symmetric aileron deflection as control device. The proposed approach is validated on subsonic transport aircraft for different mass and flight conditions. Moreover, if the controller parameters are tuned for a specific gust model, even if the gust frequency changes, no parameter retuning is required. PMID:24688411

Development of a multiple-parameter nonlinear perturbation procedure for transonic turbomachinery flows: Preliminary application to design/optimization problems

NASA Technical Reports Server (NTRS)

Stahara, S. S.; Elliott, J. P.; Spreiter, J. R.

1983-01-01

An investigation was conducted to continue the development of perturbation procedures and associated computational codes for rapidly determining approximations to nonlinear flow solutions, with the purpose of establishing a method for minimizing computational requirements associated with parametric design studies of transonic flows in turbomachines. The results reported here concern the extension of the previously developed successful method for single parameter perturbations to simultaneous multiple-parameter perturbations, and the preliminary application of the multiple-parameter procedure in combination with an optimization method to blade design/optimization problem. In order to provide as severe a test as possible of the method, attention is focused in particular on transonic flows which are highly supercritical. Flows past both isolated blades and compressor cascades, involving simultaneous changes in both flow and geometric parameters, are considered. Comparisons with the corresponding exact nonlinear solutions display remarkable accuracy and range of validity, in direct correspondence with previous results for single-parameter perturbations.

A Hybrid Positioning Strategy for Vehicles in a Tunnel Based on RFID and In-Vehicle Sensors

PubMed Central

Song, Xiang; Li, Xu; Tang, Wencheng; Zhang, Weigong; Li, Bin

2014-01-01

Many intelligent transportation system applications require accurate, reliable, and continuous vehicle positioning. How to achieve such positioning performance in extended GPS-denied environments such as tunnels is the main challenge for land vehicles. This paper proposes a hybrid multi-sensor fusion strategy for vehicle positioning in tunnels. First, the preliminary positioning algorithm is developed. The Radio Frequency Identification (RFID) technology is introduced to achieve preliminary positioning in the tunnel. The received signal strength (RSS) is used as an indicator to calculate the distances between the RFID tags and reader, and then a Least Mean Square (LMS) federated filter is designed to provide the preliminary position information for subsequent global fusion. Further, to improve the positioning performance in the tunnel, an interactive multiple model (IMM)-based global fusion algorithm is developed to fuse the data from preliminary positioning results and low-cost in-vehicle sensors, such as electronic compasses and wheel speed sensors. In the actual implementation of IMM, the strong tracking extended Kalman filter (STEKF) algorithm is designed to replace the conventional extended Kalman filter (EKF) to achieve model individual filtering. Finally, the proposed strategy is evaluated through experiments. The results validate the feasibility and effectiveness of the proposed strategy. PMID:25490581

A hybrid positioning strategy for vehicles in a tunnel based on RFID and in-vehicle sensors.

PubMed

Song, Xiang; Li, Xu; Tang, Wencheng; Zhang, Weigong; Li, Bin

2014-12-05

Many intelligent transportation system applications require accurate, reliable, and continuous vehicle positioning. How to achieve such positioning performance in extended GPS-denied environments such as tunnels is the main challenge for land vehicles. This paper proposes a hybrid multi-sensor fusion strategy for vehicle positioning in tunnels. First, the preliminary positioning algorithm is developed. The Radio Frequency Identification (RFID) technology is introduced to achieve preliminary positioning in the tunnel. The received signal strength (RSS) is used as an indicator to calculate the distances between the RFID tags and reader, and then a Least Mean Square (LMS) federated filter is designed to provide the preliminary position information for subsequent global fusion. Further, to improve the positioning performance in the tunnel, an interactive multiple model (IMM)-based global fusion algorithm is developed to fuse the data from preliminary positioning results and low-cost in-vehicle sensors, such as electronic compasses and wheel speed sensors. In the actual implementation of IMM, the strong tracking extended Kalman filter (STEKF) algorithm is designed to replace the conventional extended Kalman filter (EKF) to achieve model individual filtering. Finally, the proposed strategy is evaluated through experiments. The results validate the feasibility and effectiveness of the proposed strategy.

Advanced Method of Boundary-Layer Control Based on Localized Plasma Generation

DTIC Science & Technology

2009-05-01

measurements, validation of experiments, wind-tunnel testing of the microwave / plasma generation system , preliminary assessment of energy required...and design of a microwave generator , electrodynamic and multivibrator systems for experiments in the IHM-NAU wind tunnel: MW generator and its high...equipped with the microwave - generation and protection systems to study advanced methods of flow control (Kiev) Fig. 2.1,a. The blade

The Toileting Habit Profile Questionnaire: Screening for Sensory-Based Toileting Difficulties in Young Children with Constipation and Retentive Fecal Incontinence

ERIC Educational Resources Information Center

Beaudry-Bellefeuille, Isabelle; Lane, Shelly J.; Ramos-Polo, Eduardo

2016-01-01

This study examined the face and preliminary content validity of the Toileting Habit Profile Questionnaire, a tool designed to screen for sensory-based defecation difficulties in children. A panel of experts reviewed a pilot version of the questionnaire and responded to probe questions. Two reviewers conducted direct content analysis of responses;…

Investigation of High-alpha Lateral-directional Control Power Requirements for High-performance Aircraft

NASA Technical Reports Server (NTRS)

Foster, John V.; Ross, Holly M.; Ashley, Patrick A.

1993-01-01

Designers of the next-generation fighter and attack airplanes are faced with the requirements of good high-angle-of-attack maneuverability as well as efficient high speed cruise capability with low radar cross section (RCS) characteristics. As a result, they are challenged with the task of making critical design trades to achieve the desired levels of maneuverability and performance. This task has highlighted the need for comprehensive, flight-validated lateral-directional control power design guidelines for high angles of attack. A joint NASA/U.S. Navy study has been initiated to address this need and to investigate the complex flight dynamics characteristics and controls requirements for high-angle-of-attack lateral-directional maneuvering. A multi-year research program is underway which includes ground-based piloted simulation and flight validation. This paper will give a status update of this program that will include a program overview, description of test methodology and preliminary results.

Investigation of high-alpha lateral-directional control power requirements for high-performance aircraft

NASA Technical Reports Server (NTRS)

Foster, John V.; Ross, Holly M.; Ashley, Patrick A.

1993-01-01

Designers of the next-generation fighter and attack airplanes are faced with the requirements of good high angle-of-attack maneuverability as well as efficient high speed cruise capability with low radar cross section (RCS) characteristics. As a result, they are challenged with the task of making critical design trades to achieve the desired levels of maneuverability and performance. This task has highlighted the need for comprehensive, flight-validated lateral-directional control power design guidelines for high angles of attack. A joint NASA/U.S. Navy study has been initiated to address this need and to investigate the complex flight dynamics characteristics and controls requirements for high angle-of-attack lateral-directional maneuvering. A multi-year research program is underway which includes groundbased piloted simulation and flight validation. This paper will give a status update of this program that will include a program overview, description of test methodology and preliminary results.

GSDO PDR (Preliminary Design Review) Morning Meeting

NASA Image and Video Library

2014-03-20

CAPE CANAVERAL, Fla. – The Ground Systems Development and Operations, or GSDO, Program completed its preliminary design review which allows development of the ground systems to proceed to detailed design. Representatives from NASA, its contractor partners and experts from across the aerospace industry met in the Mission Briefing Room inside the Operations and Checkout Building at NASA’s Kennedy Space Center in Florida to conclude the initial design and technology development phase. Completion of this review has validated that the baseline architecture is sound and aligns with the agency's exploration objectives. NASA is developing the Space Launch System and Orion spacecraft to provide an entirely new capability for human exploration beyond low-Earth orbit, with the flexibility to launch spacecraft for crew and cargo missions, including to an asteroid and Mars. Orion’s first unpiloted test flight is scheduled to launch later this year atop a Delta IV rocket. A second uncrewed flight test is scheduled for fiscal year 2018 on the Space Launch System rocket. For more information, visit http://www.nasa.gov/orion. Photo credit: NASA/Cory Huston

Development of an agility assessment module for preliminary fighter design

NASA Technical Reports Server (NTRS)

Ngan, Angelen; Bauer, Brent; Biezad, Daniel; Hahn, Andrew

1996-01-01

A FORTRAN computer program is presented to perform agility analysis on fighter aircraft configurations. This code is one of the modules of the NASA Ames ACSYNT (AirCraft SYNThesis) design code. The background of the agility research in the aircraft industry and a survey of a few agility metrics are discussed. The methodology, techniques, and models developed for the code are presented. FORTRAN programs were developed for two specific metrics, CCT (Combat Cycle Time) and PM (Pointing Margin), as part of the agility module. The validity of the code was evaluated by comparing with existing flight test data. Example trade studies using the agility module along with ACSYNT were conducted using Northrop F-20 Tigershark and McDonnell Douglas F/A-18 Hornet aircraft models. The sensitivity of thrust loading and wing loading on agility criteria were investigated. The module can compare the agility potential between different configurations and has the capability to optimize agility performance in the preliminary design process. This research provides a new and useful design tool for analyzing fighter performance during air combat engagements.

The Art Gallery Test: A Preliminary Comparison between Traditional Neuropsychological and Ecological VR-Based Tests.

PubMed

Gamito, Pedro; Oliveira, Jorge; Alghazzawi, Daniyal; Fardoun, Habib; Rosa, Pedro; Sousa, Tatiana; Maia, Ines; Morais, Diogo; Lopes, Paulo; Brito, Rodrigo

2017-01-01

Ecological validity should be the cornerstone of any assessment of cognitive functioning. For this purpose, we have developed a preliminary study to test the Art Gallery Test (AGT) as an alternative to traditional neuropsychological testing. The AGT involves three visual search subtests displayed in a virtual reality (VR) art gallery, designed to assess visual attention within an ecologically valid setting. To evaluate the relation between AGT and standard neuropsychological assessment scales, data were collected on a normative sample of healthy adults ( n = 30). The measures consisted of concurrent paper-and-pencil neuropsychological measures [Montreal Cognitive Assessment (MoCA), Frontal Assessment Battery (FAB), and Color Trails Test (CTT)] along with the outcomes from the three subtests of the AGT. The results showed significant correlations between the AGT subtests describing different visual search exercises strategies with global and specific cognitive measures. Comparative visual search was associated with attention and cognitive flexibility (CTT); whereas visual searches involving pictograms correlated with global cognitive function (MoCA).

Preliminary experiments on pharmacokinetic diffuse fluorescence tomography of CT-scanning mode

NASA Astrophysics Data System (ADS)

Zhang, Yanqi; Wang, Xin; Yin, Guoyan; Li, Jiao; Zhou, Zhongxing; Zhao, Huijuan; Gao, Feng; Zhang, Limin

2016-10-01

In vivo tomographic imaging of the fluorescence pharmacokinetic parameters in tissues can provide additional specific and quantitative physiological and pathological information to that of fluorescence concentration. This modality normally requires a highly-sensitive diffuse fluorescence tomography (DFT) working in dynamic way to finally extract the pharmacokinetic parameters from the measured pharmacokinetics-associated temporally-varying boundary intensity. This paper is devoted to preliminary experimental validation of our proposed direct reconstruction scheme of instantaneous sampling based pharmacokinetic-DFT: A highly-sensitive DFT system of CT-scanning mode working with parallel four photomultiplier-tube photon-counting channels is developed to generate an instantaneous sampling dataset; A direct reconstruction scheme then extracts images of the pharmacokinetic parameters using the adaptive-EKF strategy. We design a dynamic phantom that can simulate the agent metabolism in living tissue. The results of the dynamic phantom experiments verify the validity of the experiment system and reconstruction algorithms, and demonstrate that system provides good resolution, high sensitivity and quantitativeness at different pump speed.

Developing nurse and physician questionnaires to assess primary work areas in intensive care units.

PubMed

Rashid, Mahbub; Boyle, Diane K; Crosser, Michael

2014-01-01

The objective of the study was to develop instruments for describing and assessing some aspects of design of the primary work areas of nurses and physicians in intensive care units (ICUs). Separate questionnaires for ICU physicians and nurses were developed. Items related to individual- and unit-level design features of the primary work areas of nurses and physicians were organized using constructs found in the literature. Items related to staff satisfaction and staff use of time in relation to primary work area design were also included. All items and constructs were reviewed by experts for content validity and were modified as needed before use. The final questionnaires were administered to a convenience sample of 4 ICUs in 2 large urban hospitals. A total of 55 nurses and 29 physicians completed the survey. The Cronbach α was used to measure internal consistency, and factor analysis was used to provide construct-related validity. Convergent and discriminant validity were assessed through examining bivariate correlations between relevant scales/items. Analysis of variance was used to identify whether the between-group member responses were significant among the 4 units. The Cronbach α values for all except 3 preliminary scales indicated acceptable reliability. Factor analysis indicated that some preliminary scales could be partitioned into subscales for finer descriptions of the primary work areas. Correlational analysis provided strong evidence of convergent and discriminant validity of all the scales and subscales. The significance level of F-statistics showed that the units were significantly different from each other, providing evidence of more between-unit variance than within-unit variance. Therefore, the questionnaires developed in the study offer a promising departure point for rigorous description and evaluation of the primary work areas in relation to staff satisfaction and use of time in ICUs at a time when the importance of such studies is growing.

Multidisciplinary High-Fidelity Analysis and Optimization of Aerospace Vehicles. Part 2; Preliminary Results

NASA Technical Reports Server (NTRS)

Walsh, J. L.; Weston, R. P.; Samareh, J. A.; Mason, B. H.; Green, L. L.; Biedron, R. T.

2000-01-01

An objective of the High Performance Computing and Communication Program at the NASA Langley Research Center is to demonstrate multidisciplinary shape and sizing optimization of a complete aerospace vehicle configuration by using high-fidelity finite-element structural analysis and computational fluid dynamics aerodynamic analysis in a distributed, heterogeneous computing environment that includes high performance parallel computing. A software system has been designed and implemented to integrate a set of existing discipline analysis codes, some of them computationally intensive, into a distributed computational environment for the design of a high-speed civil transport configuration. The paper describes both the preliminary results from implementing and validating the multidisciplinary analysis and the results from an aerodynamic optimization. The discipline codes are integrated by using the Java programming language and a Common Object Request Broker Architecture compliant software product. A companion paper describes the formulation of the multidisciplinary analysis and optimization system.

Simulation of crossflow instability on a supersonic highly swept wing

NASA Technical Reports Server (NTRS)

Pruett, C. David

1995-01-01

A direct numerical simulation (DNS) algorithm has been developed and validated for use in the investigation of crossflow instability on supersonic swept wings, an application of potential relevance to the design of the High-Speed Civil Transport (HSCT). The algorithm is applied to the investigation of stationary crossflow instability on an infinitely long 77-degree swept wing in Mach 3.5 flow. The results of the DNS are compared with the predictions of linear parabolized stability equation (PSE) methodology. In-general, the DNS and PSE results agree closely in terms of modal growth rate, structure, and orientation angle. Although further validation is needed for large-amplitude (nonlinear) disturbances, the close agreement between independently derived methods offers preliminary validation of both DNS and PSE approaches.

Preliminary Evaluation Of Commercial Supercapacitors For Space Applications

NASA Astrophysics Data System (ADS)

Gineste, Valery; Loup, Didier; Mattesco, Patrick; Neugnot, Nicolas

2011-10-01

Supercapacitors are identified since years as a new technology enabling energy storage together with high power delivery capability to the system. A recent ESA study [1] led by Astrium has demonstrated the interest of these devices for space application, providing that reliability and end of life performances are demonstrated. A realistic commercial on the shelf (COTS) approach (or with limited design modification approved by potential suppliers) has been favoured (as for batteries). This paper presents preliminary test results done by Astrium on COTS supercapacitors: accelerated life tests, calendar life tests, technology analyses. Based on these results, assessment and lessons learnt are drawn in view of future exhaustive supercapacitor validation and future qualification.

Preliminary Experiments for the Assessment of V/W-band Links for Space-Earth Communications

NASA Technical Reports Server (NTRS)

Nessel, James A.; Acosta, Roberto J.; Miranda, Felix A.

2013-01-01

Since September 2012, NASA Glenn Research Center has deployed a microwave profiling radiometer at White Sands, NM, to estimate atmospheric propagation effects on communications links in the V and W bands (71-86GHz). Estimates of attenuation statistics in the millimeter wave due to gaseous and cloud components of the atmosphere show good agreement with current ITU-R models, but fail to predict link performance in the presence of moderate to heavy rain rates, due to the inherent limitations of passive radiometry. Herein, we discuss the preliminary results of these measurements and describe a design for a terrestrial link experiment to validate/refine existing rain attenuation models in the V/Wbands.

Validation of a psychometric instrument to assess motivation in veterinary bachelor students.

PubMed

Vandeweerd, Jean-Michel; Dugdale, Alexandra; Romainville, Marc

2014-01-01

There are indications that motivation correlates with better performance for those studying veterinary medicine. To assess objectively whether motivation profiles influence both veterinary students' attitudes towards educational interventions and their academic success and whether changes in curriculum can affect students' motivation, there is need for an instrument that can provide a valid measurement of the strength of motivation for the study of veterinary medicine. Our objectives were to design and validate a questionnaire that can be used as a psychometric scale to capture the motivation profiles of veterinary students. Question items were obtained from semi-structured interviews with students and from a review of the relevant literature. Each item was scored on a 5-point scale. The preliminary instrument was trialed on a cohort of 450 students. Responses were subjected to reliability and principal component analysis. A 14-item scale was designed, within which two factors explained 53.4% of the variance among the items. The scale had good face, content, and construct validities as well as a good internal consistency (Cronbach's alpha=.88).

Block 2 SRM conceptual design studies. Volume 1, Book 1: Conceptual design package

NASA Technical Reports Server (NTRS)

Smith, Brad; Williams, Neal; Miller, John; Ralston, Joe; Richardson, Jennifer; Moore, Walt; Doll, Dan; Maughan, Jeff; Hayes, Fred

1986-01-01

The conceptual design studies of a Block 2 Solid Rocket Motor (SRM) require the elimination of asbestos-filled insulation and was open to alternate designs, such as case changes, different propellants, modified burn rate - to improve reliability and performance. Limitations were placed on SRM changes such that the outside geometry should not impact the physical interfaces with other Space Shuttle elements and should have minimum changes to the aerodynamic and dynamic characteristics of the Space Shuttle vehicle. Previous Space Shuttle SRM experience was assessed and new design concepts combined to define a valid approach to assured flight success and economic operation of the STS. Trade studies, preliminary designs, analyses, plans, and cost estimates are documented.

Modified Linear Theory Aircraft Design Tools and Sonic Boom Minimization Strategy Applied to Signature Freezing via F-function Lobe Balancing

NASA Astrophysics Data System (ADS)

Jung, Timothy Paul

Commercial supersonic travel has strong business potential; however, in order for the Federal Aviation Administration to lift its ban on supersonic flight overland, designers must reduce aircraft sonic boom strength to an acceptable level. An efficient methodology and associated tools for designing aircraft for minimized sonic booms are presented. The computer-based preliminary design tool, RapidF, based on modified linear theory, enables quick assessment of an aircraft's sonic boom with run times less than 30 seconds on a desktop computer. A unique feature of RapidF is that it tracks where on the aircraft each segment of the of the sonic boom came from, enabling precise modifications, speeding the design process. Sonic booms from RapidF are compared to flight test data, showing that it is capability of predicting a sonic boom duration, overpressure, and interior shock locations. After the preliminary design is complete, scaled flight tests should be conducted to validate the low boom design. When conducting such tests, it is insufficient to just scale the length; thus, equations to scale the weight and propagation distance are derived. Using RapidF, a conceptual supersonic business jet design is presented that uses F-function lobe balancing to create a frozen sonic boom using lifting surfaces. The leading shock is reduced from 1.4 to 0.83 psf, and the trailing shock from 1.2 to 0.87 psf, 41% and 28% reductions respectfully. By changing the incidence angle of the surfaces, different sonic boom shapes can be created, and allowing the lobes to be re-balanced for new flight conditions. Computational fluid dynamics is conducted to validate the sonic boom predictions. Off-design analysis is presented that varies weight, altitude, Mach number, and propagation angle, demonstrating that lobe-balance is robust. Finally, the Perceived Level of Loudness metric is analyzed, resulting in a modified design that incorporates other boom minimization techniques to further reduce the sonic boom.

Development of the family symptom inventory: a psychosocial screener for children with hematology/oncology conditions.

PubMed

Karlson, Cynthia W; Haynes, Stacey; Faith, Melissa A; Elkin, Thomas D; Smith, Maria L; Megason, Gail

2015-03-01

A growing body of literature has begun to underscore the importance of integrating family-based comprehensive psychological screening into standard medical care for children with oncology and hematology conditions. There are no known family-based measures designed to screen for clinically significant emotional and behavioral concerns in pediatric oncology and hematology patients. The aim of this study was to develop and evaluate the Family Symptom Inventory (FSI), a brief screener of patient and family member psychological symptoms. The FSI also screens for common comorbid physical symptoms (pain and sleep disturbance) and is designed for use at any point during treatment and follow-up. A total of 488 caregivers completed the FSI during regular hematology/oncology visits for 193 cancer, 219 sickle cell disease, and 76 hematology pediatric patients. Exploratory factor analysis, confirmatory factor analysis, and tests of reliability and preliminary validity were conducted. Exploratory factor analysis suggested a 34-item, 4-factor solution, which was confirmed in an independent sample using confirmatory factor analysis (factor loadings=0.49 to 0.88). The FSI demonstrated good internal reliability (α's=0.86 to 0.92) and good preliminary validity. Regular psychosocial screening throughout the course of treatment and follow-up may lead to improved quality of care for children with oncology and hematology conditions.

[Preliminary construction of a questionnaire about knowledge of HIV/AIDS in Colombian veterans].

PubMed

Segura-Cardona, Angela; Berbesí-Fernández, Dedsy; Cardona-Arango, Doris; Ordóñez-Molina, Jaime

2011-01-01

In order to identify the level of knowledge about HIV/AIDS in Colombia veterans of war in the year 2009, a questionnaire was designed, built and validated, using a mixed design, for which three stages were followed: 1) Bibliographic review and construction of items of the questionnaire using a focus group, 2) Evaluation of content validity by a pannel of experts, 3) APLICACION of the final questionnaire, we selected non-randomly 323 people who were part of group of veterans in Colombia, and 4) Validation of the questionnaire through the evaluation of internal consistency and principal component analysis. We found that the questionnaire explored three factors: forms of infection, inadequate beliefs, and HIV prevention, which accounted for 52% of the variance. The survey showed adequate internal consistency values (Cronbach's α = 0.77). These results suggest the use of the questionnaire to assess knowledge level related to the form of infection, inaccurate beliefs and prevention of HIV-AIDS in this population.

Making and Executing Decisions for Safe and Independent Living (MED-SAIL): Development and Validation of a Brief Screening Tool

PubMed Central

Mills, Whitney L.; Regev, Tziona; Kunik, Mark E.; Wilson, Nancy L.; Moye, Jennifer; McCullough, Laurence B.; Naik, Aanand D.

2017-01-01

Objectives Older adults prefer to remain in their own homes for as long as possible. The purpose of this article is to describe the development and preliminary validation of Making and Executing Decisions for Safe and Independent Living (MED-SAIL), a brief screening tool for capacity to live safely and independently in the community. Design Prospective preliminary validation study. Setting Outpatient geriatrics clinic located in a community-based hospital. Participants Forty-nine community-dwelling older adults referred to the clinic for a comprehensive capacity assessment. Measurements We examined internal consistency, criterion-based validity, concurrent validity, and accuracy of classification for MED-SAIL. Results The items included in MED-SAIL demonstrated internal consistency (5 items; α = 0.85). MED-SAIL was significantly correlated with the Independent Living Scales (r = 0.573, p ≤ 0.001) and instrumental activities of daily living (r = 0.440, p ≤ 0.01). The Mann-Whitney U test revealed significant differences between the no capacity and partial/full capacity classifications on MED-SAIL (U(48) = 60.5, Z = −0.38, p <0.0001). The area under the curve was 0.864 (95% confidence interval: 0.84–0.99). Conclusions This study demonstrated the validity of MED-SAIL as a brief screening tool to identify older adults with impaired capacity for remaining safe and independent in their current living environment. MED-SAIL is useful tool for health and social service providers in the community for the purpose of referral for definitive capacity evaluation. PMID:23567420

The Parent Trauma Response Questionnaire (PTRQ): development and preliminary validation

PubMed Central

Creswell, Cathy; Dalgleish, Tim; Fearon, Pasco; Goodall, Ben; McKinnon, Anna; Smith, Patrick; Wright, Isobel

2018-01-01

ABSTRACT Background: Following a child’s experience of trauma, parental response is thought to play an important role in either facilitating or hindering their psychological adjustment. However, the ability to investigate the role of parenting responses in the post-trauma period has been hampered by a lack of valid and reliable measures. Objectives: The aim of this study was to design, and provide a preliminary validation of, the Parent Trauma Response Questionnaire (PTRQ), a self-report measure of parental appraisals and support for children’s coping, in the aftermath of child trauma. Methods: We administered an initial set of 78 items to 365 parents whose children, aged 2–19 years, had experienced a traumatic event. We conducted principal axis factoring and then assessed the validity of the reduced measure against a standardized general measure of parental overprotection and via the measure’s association with child post-trauma mental health. Results: Factor analysis generated three factors assessing parental maladaptive appraisals: (i) permanent change/damage, (ii) preoccupation with child’s vulnerability, and (iii) self-blame. In addition, five factors were identified that assess parental support for child coping: (i) behavioural avoidance, (ii) cognitive avoidance, (iii) overprotection, (iv) maintaining pre-trauma routines, and (v) approach coping. Good validity was evidenced against the measure of parental overprotection and child post-traumatic stress symptoms. Good test–retest reliability of the measure was also demonstrated. Conclusions: The PTRQ is a valid and reliable self-report assessment of parenting cognitions and coping in the aftermath of child trauma. PMID:29938010

A mobile sensing system for structural health monitoring: design and validation

NASA Astrophysics Data System (ADS)

Zhu, Dapeng; Yi, Xiaohua; Wang, Yang; Lee, Kok-Meng; Guo, Jiajie

2010-05-01

This paper describes a new approach using mobile sensor networks for structural health monitoring. Compared with static sensors, mobile sensor networks offer flexible system architectures with adaptive spatial resolutions. The paper first describes the design of a mobile sensing node that is capable of maneuvering on structures built with ferromagnetic materials. The mobile sensing node can also attach/detach an accelerometer onto/from the structural surface. The performance of the prototype mobile sensor network has been validated through laboratory experiments. Two mobile sensing nodes are adopted for navigating on a steel portal frame and providing dense acceleration measurements. Transmissibility function analysis is conducted to identify structural damage using data collected by the mobile sensing nodes. This preliminary work is expected to spawn transformative changes in the use of mobile sensors for future structural health monitoring.

Preliminary Development and Validation of a Measure of Relationship Authenticity

ERIC Educational Resources Information Center

Lopez, Frederick G.; Rice, Kenneth G.

2006-01-01

The authors describe the preliminary development and validation of the Authenticity in Relationships Scale. An initial pool of 37 items addressing various elements of the proposed definition of "relationship authenticity" was administered to 2 independent samples of undergraduates (N = 487) who acknowledged being in a current romantic…

A secondstep in development of a checklist for screening risk for violence in acute psychiatric patients: evaluation of interrater reliability of the Preliminary Scheme 33.

PubMed

Bjørkly, Stål; Moger, Tron A

2007-12-01

The Acute Project is a research project conducted on acute psychiatric admission wards in Norway. The objective is to develop and validate a structured, easy-to-use screening checklist for assessment of risk for violence in patients both during their stay in the ward and after discharge. The Preliminary Scheme 33 is a 33-item screening checklist with content domain inspired by the Historical-Clinical-Risk Management Scheme (HCR-20), the Brøset Violence Checklist, and eight risk factors extracted from the literature on risk assessment. The Preliminary Scheme 33 was designed and tested in two steps by a research group which includes the authors. The common aim of both steps was to develop this into a time economical, reliable, and valid checklist. In the first step in 2006 the predictive validity of the individual items was tested. The present work presents results from the second step, a study conducted to assess the interrater reliability of the 33 items. Eight clinicians working in an acute psychiatric unit volunteered to be raters and were trained to score the 33 items on a three-point scale in relation to 15 clinical vignettes, which contained information from 15 acute psychiatric patients' files. Analysis showed high interrater reliability for the total score with an intraclass correlation coefficient (ICC) of .86 (95% CI: 0.74-0.94). However, a substantial proportion of the items had medium to low ICCs. Consequences of this finding for further development of these items into a brief screen are discussed.

Velocity Measurements in Nasal Cavities by Means of Stereoscopic Piv - Preliminary Tests

NASA Astrophysics Data System (ADS)

Cozzi, Fabio; Felisati, Giovanni; Quadrio, Maurizio

2017-08-01

The prediction of detailed flow patterns in human nasal cavities using computational fluid dynamics (CFD) can provide essential information on the potential relationship between patient-specific geometrical characteristics of the nasal anatomy and health problems, and ultimately led to improved surgery. The complex flow structure and the intricate geometry of the nasal cavities make achieving such goals a challenge for CFD specialists. The need for experimental data to validate and improve the numerical simulations is particularly crucial. To this aim an experimental set-up based on Stereo PIV and a silicon phantom of nasal cavities have been designed and realized at Politecnico di Milano. This work describes the main features and challenges of the set-up along with some preliminary results.

Evaluation of the Military Functional Assessment Program: Preliminary Assessment of the Construct Validity Using an Archived Database of Clinical Data

DTIC Science & Technology

2013-08-01

RTD standards poses common scientific challenges that generalize to several classes of trauma. The essential requirements of key military occupations...Execute prepared land navigation task Engagement Skills Trainer 2000 (EST) – Weapons Qualification Zero a weapon and complete standard ...Alexandria, Virginia 22314. Orders will be expedited if placed through the librarian or other person designated to request documents from DTIC

The NASA Lunar Impact Monitoring Program

NASA Technical Reports Server (NTRS)

Suggs, Rob

2008-01-01

We have a fruitful observing program underway which has significantly increased the number of lunar impacts observed. We have done initial test shots at the Ames Vertical Gun Range obtained preliminary luminous efficiency values. More shots and better diagnostics are needed to determine ejecta properties. We are working to have a more accurate ejecta. environment definition to support lunar lander, habitat, and EVA design. Data also useful for validation of sporadic model at large size range.

The 7.5K lbf thrust engine preliminary design for Orbit Transfer Vehicle

NASA Technical Reports Server (NTRS)

Hayden, Warren R.; Sabiers, Ralph; Schneider, Judy

1994-01-01

This document summarizes the preliminary design of the Aerojet version of the Orbit Transfer Vehicle main engine. The concept of a 7500 lbf thrust LO2/GH2 engine using the dual expander cycle for optimum efficiency is validated through power balance and thermal calculations. The engine is capable of 10:1 throttling from a nominal 2000 psia to a 200 psia chamber pressure. Reservations are detailed on the feasibility of a tank head start, but the design incorporates low speed turbopumps to mitigate the problem. The mechanically separate high speed turbopumps use hydrostatic bearings to meet engine life requirements, and operate at sub-critical speed for better throttling ability. All components were successfully packaged in the restricted envelope set by the clearances for the extendible/retractable nozzle. Gimbal design uses an innovative primary and engine out gimbal system to meet the +/- 20 deg gimbal requirement. The hydrogen regenerator and LOX/GH2 heat exchanger uses the Aerojet platelet structures approach for a highly compact component design. The extendible/retractable nozzle assembly uses an electric motor driven jack-screw design and a one segment carbon-carbon or silicide coated columbium nozzle with an area ratio, when extended, of 1430:1. A reliability analysis and risk assessment concludes the report.

Development and validation of the Eating Maturity Questionnaire: Preliminary findings.

PubMed

Potocka, Adrianna; Najder, Anna

2016-10-01

This article describes the development of the Eating Maturity Questionnaire, a self-reported measurement of eating maturity that initiates and gives direction to human eating behaviors. The Eating Maturity Questionnaire was designed to study individuals' biological and psychosocial motives for eating. The Eating Maturity Questionnaire is a 21-item tool with satisfactory psychometric values (Cronbach's α coefficients between 0.83 and 0.88) consisting of two subscales: Rational Eating and Psychosocial Maturity Eating Maturity Questionnaire results may be used to design programs that target eating behaviors and body mass modification. © The Author(s) 2015.

Design and evaluation of a patient website to reduce crowding in emergency departments: a preliminary study.

PubMed

Schiro, Jessica; Marcilly, Romaric; Leroy, Nicolas; Wawrzyniak, Clément; Martinot, Alain; Pelayo, Sylvia

2015-01-01

The study aims to identify the information useful to support a patients' EDs' choice in order to design a patient Web-based system. For that purpose, a focus group and a formative user test have been performed. The results show that five types of information can be relevant. The spontaneous favored information is the "distance" to EDs. The "Wait time", that is sanctified in literature, is only used in a second time. A larger summative evaluation should be planned to evaluate and validate the befits of this kind of tool.

Incident Energy Focused Design and Validation for the Floating Potential Probe

NASA Technical Reports Server (NTRS)

Fincannon, James

2002-01-01

Utilizing the spacecraft shadowing and incident energy analysis capabilities of the NASA Glenn Research Center Power and Propulsion Office's SPACE System Power Analysis for Capability Evaluation) computer code, this paper documents the analyses for various International Space Station (ISS) Floating Potential Probe (EPP) preliminary design options. These options include various solar panel orientations and configurations as well as deployment locations on the ISS. The incident energy for the final selected option is characterized. A good correlation between the predicted data and on-orbit operational telemetry is demonstrated. Minor deviations are postulated to be induced by degradation or sensor drift.

Development and Preliminary Validation of the Collective Efficacy Questionnaire for Sports

ERIC Educational Resources Information Center

Short, Sandra E.; Sullivan, Philip; Feltz, Deborah L.

2005-01-01

This study presents the development and preliminary validation of the Collective Efficacy Questionnaire for Sports (CEQS). The study was conducted in 3 phases. In Phase 1, a 42-item questionnaire was developed and tested with 271 college-aged student-athletes. An exploratory factor analysis revealed 5 collective efficacy factors with 27 items…

Preliminary Validation of Composite Material Constitutive Characterization

Treesearch

John G. Michopoulos; Athanasios lliopoulos; John C. Hermanson; Adrian C. Orifici; Rodney S. Thomson

2012-01-01

This paper is describing the preliminary results of an effort to validate a methodology developed for composite material constitutive characterization. This methodology involves using massive amounts of data produced from multiaxially tested coupons via a 6-DoF robotic system called NRL66.3 developed at the Naval Research Laboratory. The testing is followed by...

Development and Validation of the Evidence-Based Practice Process Assessment Scale: Preliminary Findings

ERIC Educational Resources Information Center

Rubin, Allen; Parrish, Danielle E.

2010-01-01

Objective: This report describes the development and preliminary findings regarding the reliability, validity, and sensitivity of a scale that has been developed to assess practitioners' perceived familiarity with, attitudes about, and implementation of the phases of the evidence-based practice (EBP) process. Method: After a panel of national…

Development and Preliminary Validation of the Time Management for Exercise Scale

ERIC Educational Resources Information Center

Hellsten, Laurie-ann M.; Rogers, W. Todd

2009-01-01

The purpose of this study was to collect preliminary validity evidence for a time management scale for exercise. An initial pool of 91 items was developed from existing literature. Ten exercise/health psychologists evaluated each of the items in terms of relevance and representativeness. Forty-nine items met all criteria. Exploratory factor…

THE PICNIC GAME: PRESENTATION OF A SITUATION OF OBSERVATION TO ASSESS FAMILY INTERACTIONS.

PubMed

Favez, Nicolas; Frascarolo, France; Grimard, Nathalie

2016-05-01

The aim of this article is to present a situation of observation designed for the assessment of family interactions: The PicNic Game (PNG). In this situation, families are invited to play at having a picnic together. This can be done with any number of children, aged from a few weeks to adolescence. A companion assessment tool, the Revised-Picnic Assessment Scale (Re-PAS), allows evaluation of interactions in the family on several dimensions. This article presents the PNG and a preliminary study of the validation of the Re-PAS dimensions in a sample of families (N = 67) with 18-month-old infants and their siblings. The PNG was well-received by the families. Construct validity of the Re-PAS was tested, first against self-reported data by mothers and fathers regarding marital satisfaction, coparenting behavior, and division of household tasks, and then against observed maternal and paternal sensitivity and controlling behaviors assessed during free-play. Results show satisfactory preliminary reliability and validity. Two contrasting cases are presented to illustrate the different interactions highlighted in the PNG. This situation is useful for researchers and clinicians, particularly as a basis for video-feedback work with the family. © 2016 Michigan Association for Infant Mental Health.

Preliminary validation of the Satisfaction With Decision scale with depressed primary care patients

PubMed Central

Wills, Celia E.; Holmes‐Rovner, Margaret

2003-01-01

Abstract Objective To conduct a preliminary validation of the Satisfaction With Decision (SWD) scale with depressed primary care patients. Design  Cross‐sectional observational pilot study using a postal survey. Setting and participants  Depressed primary care patients (n = 97) who recently had made a new decision about antidepressant medication use completed surveys regarding their treatment decisions. Main variables  Measures included patient‐reported satisfaction with decision, decisional conflict, knowledge about depression and treatment, decision involvement, pain and health status, antidepressant medication efficacy, and satisfaction with health services. Results  The SWD scale had good internal consistency reliability (α = 0.85). Evidence for construct validity was confirmed via a hypothesized pattern of relationships between the SWD scale and other measures. Decision satisfaction was associated with several issues of relevance for designing patient‐centred decision support interventions: (1) knowledge about depression and treatment; (2) involvement in health‐related decisions; and (3) aiding evaluation of trade‐offs among pros and cons of treatment. Conclusions  The results of this pilot study show that the SWD scale appears to be a psychometrically sound and practical measure for research with this population. Additional research is needed on the theoretical nature of decision satisfaction and developing and testing patient‐centred decision support interventions for depression treatment. PMID:12752743

A validation study of the simulation software gprMax by varying antenna stand-off height

NASA Astrophysics Data System (ADS)

Wilkinson, Josh; Davidson, Nigel

2018-04-01

The design and subsequent testing of suitable antennas and of complete ground-penetrating radar (GPR) systems can be both time consuming and expensive, with the need to understand the performance of a system in realistic environments of great importance to the end user. Through the use of suitably validated simulations, these costs could be significantly reduced, allowing an economical capability to be built which can accurately predict the performance of novel GPR antennas and existing commercial-off-the-shelf (COTS) systems in a user defined environment. This paper focuses on a preliminary validation of the open source software gprMax1 which features the ability to custom define antennas, targets, clutter objects and realistic heterogeneous soils. As an initial step in the assessment of the software, a comparison of the modelled response of targets buried in sand to experimental data has been undertaken, with the variation in response with antenna stand-off height investigated. This was conducted for both a simple bespoke bow-tie antenna design as well as for a Geophysical Survey Systems, Inc. (GSSI) commercial system,2 building upon previous work3 which explored the fidelity of gprMax in reproducing the S11 of simple antenna designs.

National Transonic Facility Wall Pressure Calibration Using Modern Design of Experiments (Invited)

NASA Technical Reports Server (NTRS)

Underwood, Pamela J.; Everhart, Joel L.; DeLoach, Richard

2001-01-01

The Modern Design of Experiments (MDOE) has been applied to wind tunnel testing at NASA Langley Research Center for several years. At Langley, MDOE has proven to be a useful and robust approach to aerodynamic testing that yields significant reductions in the cost and duration of experiments while still providing for the highest quality research results. This paper extends its application to include empty tunnel wall pressure calibrations. These calibrations are performed in support of wall interference corrections. This paper will present the experimental objectives, and the theoretical design process. To validate the tunnel-empty-calibration experiment design, preliminary response surface models calculated from previously acquired data are also presented. Finally, lessons learned and future wall interference applications of MDOE are discussed.

Static Aeroelastic Analysis with an Inviscid Cartesian Method

NASA Technical Reports Server (NTRS)

Rodriguez, David L.; Aftosmis, Michael J.; Nemec, Marian; Smith, Stephen C.

2014-01-01

An embedded-boundary Cartesian-mesh flow solver is coupled with a three degree-offreedom structural model to perform static, aeroelastic analysis of complex aircraft geometries. The approach solves the complete system of aero-structural equations using a modular, loosely-coupled strategy which allows the lower-fidelity structural model to deform the highfidelity CFD model. The approach uses an open-source, 3-D discrete-geometry engine to deform a triangulated surface geometry according to the shape predicted by the structural model under the computed aerodynamic loads. The deformation scheme is capable of modeling large deflections and is applicable to the design of modern, very-flexible transport wings. The interface is modular so that aerodynamic or structural analysis methods can be easily swapped or enhanced. This extended abstract includes a brief description of the architecture, along with some preliminary validation of underlying assumptions and early results on a generic 3D transport model. The final paper will present more concrete cases and validation of the approach. Preliminary results demonstrate convergence of the complete aero-structural system and investigate the accuracy of the approximations used in the formulation of the structural model.

Progress in the RAMI analysis of a conceptual LHCD system for DEMO

NASA Astrophysics Data System (ADS)

Mirizzi, F.

2014-02-01

Reliability, Availability, Maintainability and Inspectability (RAMI) concepts and techniques, that acquired great importance during the first manned space missions, have been progressively extended to industrial, scientific and consumer equipments to assure them satisfactory performances and lifetimes. In the design of experimental facilities, like tokamaks, mainly aimed at demonstrating validity and feasibility of scientific theories, RAMI analysis has been often left aside. DEMO, the future prototype fusion reactors, will be instead designed for steadily delivering electrical energy to commercial grids, so that the RAMI aspects will assume an absolute relevance since their initial design phases. A preliminary RAMI analysis of the LHCD system for the conceptual EU DEMO reactor is given in the paper.

Numerical aerodynamic simulation facility. Preliminary study extension

NASA Technical Reports Server (NTRS)

1978-01-01

The production of an optimized design of key elements of the candidate facility was the primary objective of this report. This was accomplished by effort in the following tasks: (1) to further develop, optimize and describe the function description of the custom hardware; (2) to delineate trade off areas between performance, reliability, availability, serviceability, and programmability; (3) to develop metrics and models for validation of the candidate systems performance; (4) to conduct a functional simulation of the system design; (5) to perform a reliability analysis of the system design; and (6) to develop the software specifications to include a user level high level programming language, a correspondence between the programming language and instruction set and outline the operation system requirements.

Carbon-carbon primary structure for SSTO vehicles

NASA Astrophysics Data System (ADS)

Croop, Harold C.; Lowndes, Holland B.

1997-01-01

A hot structures development program is nearing completion to validate use of carbon-carbon composite structure for primary load carrying members in a single-stage-to-orbit, or SSTO, vehicle. A four phase program was pursued which involved design development and fabrication of a full-scale wing torque box demonstration component. The design development included vehicle and component selection, design criteria and approach, design data development, demonstration component design and analysis, test fixture design and analysis, demonstration component test planning, and high temperature test instrumentation development. The fabrication effort encompassed fabrication of structural elements for mechanical property verification as well as fabrication of the demonstration component itself and associated test fixturing. The demonstration component features 3D woven graphite preforms, integral spars, oxidation inhibited matrix, chemical vapor deposited (CVD) SiC oxidation protection coating, and ceramic matrix composite fasteners. The demonstration component has been delivered to the United States Air Force (USAF) for testing in the Wright Laboratory Structural Test Facility, WPAFB, OH. Multiple thermal-mechanical load cycles will be applied simulating two atmospheric cruise missions and one orbital mission. This paper discusses the overall approach to validation testing of the wing box component and presents some preliminary analytical test predictions.

Virtual reality as a human factors design analysis tool: Macro-ergonomic application validation and assessment of the Space Station Freedom payload control area

NASA Technical Reports Server (NTRS)

Hale, Joseph P.

1994-01-01

A virtual reality (VR) Applications Program has been under development at MSFC since 1989. Its objectives are to develop, assess, validate, and utilize VR in hardware development, operations development and support, missions operations training, and science training. A variety of activities are under way within many of these areas. One ongoing macro-ergonomic application of VR relates to the design of the Space Station Freedom Payload Control Area (PCA), the control room from which onboard payload operations are managed. Several preliminary conceptual PCA layouts have been developed and modeled in VR. Various managers and potential end users have virtually 'entered' these rooms and provided valuable feedback. Before VR can be used with confidence in a particular application, it must be validated, or calibrated, for that class of applications. Two associated validation studies for macro-ergonomic applications are under way to help characterize possible distortions of filtering of relevant perceptions in a virtual world. In both studies, existing control rooms and their 'virtual counterparts will be empirically compared using distance and heading estimations to objects and subjective assessments. Approaches and findings of the PCA activities and details of the studies are presented.

The development of the Athens Emotional States Inventory (AESI): collection, validation and automatic processing of emotionally loaded sentences.

PubMed

Chaspari, Theodora; Soldatos, Constantin; Maragos, Petros

2015-01-01

The development of ecologically valid procedures for collecting reliable and unbiased emotional data towards computer interfaces with social and affective intelligence targeting patients with mental disorders. Following its development, presented with, the Athens Emotional States Inventory (AESI) proposes the design, recording and validation of an audiovisual database for five emotional states: anger, fear, joy, sadness and neutral. The items of the AESI consist of sentences each having content indicative of the corresponding emotion. Emotional content was assessed through a survey of 40 young participants with a questionnaire following the Latin square design. The emotional sentences that were correctly identified by 85% of the participants were recorded in a soundproof room with microphones and cameras. A preliminary validation of AESI is performed through automatic emotion recognition experiments from speech. The resulting database contains 696 recorded utterances in Greek language by 20 native speakers and has a total duration of approximately 28 min. Speech classification results yield accuracy up to 75.15% for automatically recognizing the emotions in AESI. These results indicate the usefulness of our approach for collecting emotional data with reliable content, balanced across classes and with reduced environmental variability.

A validation study of public health knowledge, skills, social responsibility and applied learning.

PubMed

Vackova, Dana; Chen, Coco K; Lui, Juliana N M; Johnston, Janice M

2018-06-22

To design and validate a questionnaire to measure medical students' Public Health (PH) knowledge, skills, social responsibility and applied learning as indicated in the four domains recommended by the Association of Schools & Programmes of Public Health (ASPPH). A cross-sectional study was conducted to develop an evaluation tool for PH undergraduate education through item generation, reduction, refinement and validation. The 74 preliminary items derived from the existing literature were reduced to 55 items based on expert panel review which included those with expertise in PH, psychometrics and medical education, as well as medical students. Psychometric properties of the preliminary questionnaire were assessed as follows: frequency of endorsement for item variance; principal component analysis (PCA) with varimax rotation for item reduction and factor estimation; Cronbach's Alpha, item-total correlation and test-retest validity for internal consistency and reliability. PCA yielded five factors: PH Learning Experience (6 items); PH Risk Assessment and Communication (5 items); Future Use of Evidence in Practice (6 items); Recognition of PH as a Scientific Discipline (4 items); and PH Skills Development (3 items), explaining 72.05% variance. Internal consistency and reliability tests were satisfactory (Cronbach's Alpha ranged from 0.87 to 0.90; item-total correlation > 0.59). Lower paired test-retest correlations reflected instability in a social science environment. An evaluation tool for community-centred PH education has been developed and validated. The tool measures PH knowledge, skills, social responsibilities and applied learning as recommended by the internationally recognised Association of Schools & Programmes of Public Health (ASPPH).

The best interest of the child-questionnaire, reliability and validity: preliminary data on the question 'where to live after detention or secure treatment?'.

PubMed

Kalverboer, Margrite; Ten Brummelaar, Mijntje; Post, Wendy; Zijlstra, Elianne; Harder, Annemiek; Knorth, Erik

2012-02-01

The Best Interest of the Child-Questionnaire (BIC-Q) has been designed as an instrument for screening the quality of the rearing situation of children with behavioural problems or delinquency. It is intended to aid legal decisions in juvenile and family law. The aim of the study was to establish the reliability and validation of the BIC-Q. Records of 83 children in detention or secure treatment centres and 58 children with no delinquent behaviours were rated by trained researchers. Interrater reliability was tested with a sub-sample of 31 of the former. Content validity was evaluated across the whole group, using Cronbach's alpha to check internal consistency, Spearman's rho to examine correlations and explorative principal component analysis (PCA) to test the extent to which variance in the 14 underlying conditions could be accounted for by a single factor 'quality of rearing'. Interrater reliability was good (r = 0.89). The PCA lent support to the content validity of the questionnaire with four factors, which together explained 66% of the variance in child rearing: (1) attachment and bonding; (2) rules and provisions; (3) health care and physical care in the family context; and (4) care and models provided for in the societal environment. The BIC-Q is a reliable and valid measure of the overall quality of child rearing. Preliminary results indicate that the BIC-Q may be applied to support court decisions on where the child should live after detention or secure treatment. Copyright © 2011 John Wiley & Sons, Ltd.

Measuring metacognitive ability based on science literacy in dynamic electricity topic

NASA Astrophysics Data System (ADS)

Warni; Sunyono; Rosidin

2018-01-01

This study aims to produce an instrument of metacognition ability assessment based on science literacy on theoretically and empirically feasible dynamic electrical material. The feasibility of the assessment instrument includes theoretical validity on material, construction, and language aspects, as well as empirical validity, reliability, difficulty, distinguishing, and distractor indices. The development of assessment instruments refers to the Dick and Carey development model which includes the preliminary study stage, initial product development, validation and revision, and piloting. The instrument was tested to 32 students of class IX in SMP Negeri 20 Bandar Lampung, using the design of One Group Pretest-Postest Design. The result shows that the metacognition ability assessment instrument based on science literacy is feasible theoretically with theoretical validity percentage of 95.44% and empirical validity of 43.75% for the high category, 43.75% for the medium category, and 12.50 % for low category questions; Reliability of assessment instruments of 0.83 high categories; Difficulty level of difficult item is about 31.25% and medium category is equal to 68.75%. Item that has very good distinguishing power is 12.50%, 62.50% for good stage, and medium category is 25.00%; As well as the duplexing function on a matter of multiple choice is 80.00% including good category and 20.00% for medium category.

[New questionnaire to assess self-efficacy toward physical activity in children].

PubMed

Aedo, Angeles; Avila, Héctor

2009-10-01

To design a questionnaire for assessment of self-efficacy toward physical activity in school children, as well as to measure its construct validity, test-retest reliability, and internal consistency. A four-stage multimethod approach was used: (1) bibliographic research followed by exploratory study and the formulation of questions and responses based on a dichotomous scale of 14 items; (2) validation of the content by a panel of experts; (3) application of the preliminary version of the questionnaire to a sample of 900 school-aged children in Mexico City; and (4) determination of the construct validity, test-retest reliability, and internal consistency (Cronbach's alpha). Three factors were identified that explain 64.15% of the variance: the search for positive alternatives to physical activity, ability to deal with possible barriers to exercising, and expectations of skill or competence. The model was validated using the goodness of fit, and the result of 65% less than 0.05 indicated that the estimated factor model fit the data. Cronbach's consistency alpha was 0.733; test-retest reliability was 0.867. The scale designed has adequate reliability and validity. These results are a good indicator of self-efficacy toward physical activity in school children, which is important when developing programs intended to promote such behavior in this age group.

Mass-based design and optimization of wave rotors for gas turbine engine enhancement

NASA Astrophysics Data System (ADS)

Chan, S.; Liu, H.

2017-03-01

An analytic method aiming at mass properties was developed for the preliminary design and optimization of wave rotors. In the present method, we introduce the mass balance principle into the design and thus can predict and optimize the mass qualities as well as the performance of wave rotors. A dedicated least-square method with artificial weighting coefficients was developed to solve the over-constrained system in the mass-based design. This method and the adoption of the coefficients were validated by numerical simulation. Moreover, the problem of fresh air exhaustion (FAE) was put forward and analyzed, and exhaust gas recirculation (EGR) was investigated. Parameter analyses and optimization elucidated which designs would not only achieve the best performance, but also operate with minimum EGR and no FAE.

Validation of Modified Wine-Rack Thermal Design for Nickel-Hydrogen Batteries in Landsat-7 Spacecraft Thermal Vacuum Test and in Flight

NASA Technical Reports Server (NTRS)

Choi, Michael K.

1999-01-01

A heritage wine-rack thermal/mechanical design for the nickel-hydrogen batteries was the baseline at the Landsat-7 Preliminary Design Review. An integrated thermal and power analysis of the batteries performed by the author in 1994 revealed that the maximum cell-to-cell gradient was 6.6 C. The author proposed modifying the heritage wine-rack design by enhancing heat conduction from cells to cells, and from cells to battery frame. At the 1995 Intersociety Energy Conversion Engineering Conference (IECEC), the author presented a paper on methods of modifying the wine-rack design. It showed that the modified wine-rack option, which uses a metallic filler, could reduce the maximum cell-to-cell temperature gradient to 1.30 C, and could also reduce the maximum cell temperature by as much as 80 C. That design concept was adopted by the Landsat7 Project Office, and a design change was made at the Critical Design Review. Results of the spacecraft thermal vacuum and thermal balance tests, and temperature data in flight show that the temperatures of the battery cells are very uniform. The maximum cell-to-cell gradient is 1.50 C. They validate the modified wine-rack thermal design.

Development and testing of the ‘Culture of Care Barometer’ (CoCB) in healthcare organisations: a mixed methods study

PubMed Central

Rafferty, Anne Marie; Philippou, Julia; Fitzpatrick, Joanne M; Pike, Geoff; Ball, Jane

2017-01-01

Objective Concerns about care quality have prompted calls to create workplace cultures conducive to high-quality, safe and compassionate care and to provide a supportive environment in which staff can operate effectively. How healthcare organisations assess their culture of care is an important first step in creating such cultures. This article reports on the development and validation of a tool, the Culture of Care Barometer, designed to assess perceptions of a caring culture among healthcare workers preliminary to culture change. Design/setting/participants An exploratory mixed methods study designed to develop and test the validity of a tool to measure ‘culture of care’ through focus groups and questionnaires. Questionnaire development was facilitated through: a literature review, experts generating items of interest and focus group discussions with healthcare staff across specialities, roles and seniority within three types of public healthcare organisations in the UK. The tool was designed to be multiprofessional and pilot tested with a sample of 467 nurses and healthcare support workers in acute care and then validated with a sample of 1698 staff working across acute, mental health and community services in England. Exploratory factor analysis was used to identify dimensions underlying the Barometer. Results Psychometric testing resulted in the development of a 30-item questionnaire linked to four domains with retained items loading to four factors: organisational values (α=0.93, valid n=1568, M=3.7), team support (α=0.93, valid n=1557, M=3.2), relationships with colleagues (α=0.84, valid n=1617, M=4.0) and job constraints (α=0.70, valid n=1616, M=3.3). Conclusions The study developed a valid and reliable instrument with which to gauge the different attributes of care culture perceived by healthcare staff with potential for organisational benchmarking. PMID:28821526

Target selection for a hypervelocity asteroid intercept vehicle flight validation mission

NASA Astrophysics Data System (ADS)

Wagner, Sam; Wie, Bong; Barbee, Brent W.

2015-02-01

Asteroids and comets have collided with the Earth in the past and will do so again in the future. Throughout Earth's history these collisions have played a significant role in shaping Earth's biological and geological histories. The planetary defense community has been examining a variety of options for mitigating the impact threat of asteroids and comets that approach or cross Earth's orbit, known as near-Earth objects (NEOs). This paper discusses the preliminary study results of selecting small (100-m class) NEO targets and mission analysis and design trade-offs for validating the effectiveness of a Hypervelocity Asteroid Intercept Vehicle (HAIV) concept, currently being investigated for a NIAC (NASA Advanced Innovative Concepts) Phase 2 study. In particular this paper will focus on the mission analysis and design for single spacecraft direct impact trajectories, as well as several mission types that enable a secondary rendezvous spacecraft to observe the HAIV impact and evaluate it's effectiveness.

Preliminary Validation of a New Clinical Tool for Identifying Problem Video Game Playing

ERIC Educational Resources Information Center

King, Daniel Luke; Delfabbro, Paul H.; Zajac, Ian T.

2011-01-01

Research has estimated that between 6 to 13% of individuals who play video games do so excessively. However, the methods and definitions used to identify "problem" video game players often vary considerably. This research presents preliminary validation data for a new measure of problematic video game play called the Problem Video Game…

Measurements of stratospheric NO, NO2, and N2O5 by ISAMS: Preliminary observations and data validation

NASA Technical Reports Server (NTRS)

Kerridge, Brian J.; Ballard, J.; Knight, R. J.; Stevens, A. D.; Reburn, J.; Morris, P.; Remedios, John J.; Taylor, Fredric W.

1994-01-01

The Improved Stratospheric and Mesospheric Sounder (ISAMS) is a multichannel radiometer and forms part of the science payload of the Upper Atmosphere Research Satellite (UARS). ISAMS measures infrared emissions from the Earth's atmosphere in several wavelength bands. Three such bands include emission from nitric oxide, nitrogen dioxide, and dinitrogen pentoxide. In this paper, we briefly discuss how the ISAMS instrument measures NO, NO2, and N2O5. We also present preliminary data from these channels and describe preliminary validation work.

Validation of Filtration Skid During Land-Based & Shipboard Tests

DTIC Science & Technology

2012-10-12

b. ABSTRACT c. THIS PAGE 19b. TELEPHONE NUMBER (include area code) Standard Form 298 (Re . 8-98) v Prescribed by ANSI Std. Z39.18 12...skid device that it had previously developed. A prototype unit was developed and deployed on the bulk carrier M/ V Indiana Harbor, and commissioning...a preliminary design of a filter skid device that it had previously developed. A prototype unit was developed and deployed on the bulk carrier M/ V

Translation, Adaptation, and Preliminary Validation of the Female Sexual Function Index into Spanish (Colombia).

PubMed

Vallejo-Medina, Pablo; Pérez-Durán, Claudia; Saavedra-Roa, Alejandro

2018-04-01

The Female Sexual Function Index (FSFI) subjectively explores the dimensions of female sexual functioning. This research undertook to adapt and validate the FSFI to Spanish language in a Colombian sample. To this effect, this study was conducted in two steps, namely: (1) cultural adaptation of the scale with the collaboration of seven experts; and (2) preliminary validation of the scale in a sample of 925 participants. Reliability indices were appropriate in this sample, and external validity in relation to other measures showed significant relationships. Findings suggest that the FSFI is reliable and valid in Spanish for a Colombian population. Further research is needed to establish the test-retest reliability and discriminant validity of this Spanish version.

GeneratorSE: A Sizing Tool for Variable-Speed Wind Turbine Generators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sethuraman, Latha; Dykes, Katherine L

This report documents a set of analytical models employed by the optimization algorithms within the GeneratorSE framework. The initial values and boundary conditions employed for the generation of the various designs and initial estimates for basic design dimensions, masses, and efficiency for the four different models of generators are presented and compared with empirical data collected from previous studies and some existing commercial turbines. These models include designs applicable for variable-speed, high-torque application featuring direct-drive synchronous generators and low-torque application featuring induction generators. In all of the four models presented, the main focus of optimization is electromagnetic design with themore » exception of permanent-magnet and wire-wound synchronous generators, wherein the structural design is also optimized. Thermal design is accommodated in GeneratorSE as a secondary attribute by limiting the winding current densities to acceptable limits. A preliminary validation of electromagnetic design was carried out by comparing the optimized magnetic loading against those predicted by numerical simulation in FEMM4.2, a finite-element software for analyzing electromagnetic and thermal physics problems for electrical machines. For direct-drive synchronous generators, the analytical models for the structural design are validated by static structural analysis in ANSYS.« less

Design and Technical Validation of a Telemedicine Service for Rural Healthcare in Ecuador.

PubMed

Vasquez-Cevallos, Leonel A; Bobokova, Jana; González-Granda, Patricia V; Iniesta, José M; Gómez, Enrique J; Hernando, M Elena

2017-12-12

Telemedicine is becoming increasingly important in Ecuador, especially in areas such as rural primary healthcare and medical education. Rural telemedicine programs in the country need to be strengthened by means of a technological platform adapted to local surroundings and offering advantages such as access to specialized care, continuing education, and so on, combined with modest investment requirements. This present article presents the design of a Telemedicine Platform (TMP) for rural healthcare services in Ecuador and a preliminary technical validation with medical students and teachers. An initial field study was designed to capture the requirements of the TMP. In a second phase, the TMP was validated in an academic environment along three consecutive academic courses. Assessment was by means of user polls and analyzing user interactions as registered automatically by the platform. The TMP was developed using Web-based technology and open code software. One hundred twenty-four students and 6 specialized faculty members participated in the study, conducting a total of 262 teleconsultations of clinical cases and 226 responses, respectively. The validation results show that the TMP is a useful communication tool for the documentation and discussion of clinical cases. Moreover, its usage may be recommended as a teaching methodology, to strengthen the skills of medical undergraduates. The results indicate that implementing the system in rural healthcare services in Ecuador would be feasible.

The Role of Integrated Modeling in the Design and Verification of the James Webb Space Telescope

NASA Technical Reports Server (NTRS)

Mosier, Gary E.; Howard, Joseph M.; Johnston, John D.; Parrish, Keith A.; Hyde, T. Tupper; McGinnis, Mark A.; Bluth, Marcel; Kim, Kevin; Ha, Kong Q.

2004-01-01

The James Web Space Telescope (JWST) is a large, infrared-optimized space telescope scheduled for launch in 2011. System-level verification of critical optical performance requirements will rely on integrated modeling to a considerable degree. In turn, requirements for accuracy of the models are significant. The size of the lightweight observatory structure, coupled with the need to test at cryogenic temperatures, effectively precludes validation of the models and verification of optical performance with a single test in 1-g. Rather, a complex series of steps are planned by which the components of the end-to-end models are validated at various levels of subassembly, and the ultimate verification of optical performance is by analysis using the assembled models. This paper describes the critical optical performance requirements driving the integrated modeling activity, shows how the error budget is used to allocate and track contributions to total performance, and presents examples of integrated modeling methods and results that support the preliminary observatory design. Finally, the concepts for model validation and the role of integrated modeling in the ultimate verification of observatory are described.

Development and preliminary validation of an index for indicating the risks of the design of working hours to health and wellbeing.

PubMed

Schomann, Carsten; Giebel, Ole; Nachreiner, Friedhelm

2006-01-01

BASS 4, a computer program for the design and evaluation of workings hours, is an example of an ergonomics-based software tool that can be used by safety practitioners at the shop floor with regard to legal, ergonomic, and economic criteria. Based on experiences with this computer program, a less sophisticated Working-Hours-Risk Index for assessing the quality of work schedules (including flexible work hours) to indicate risks to health and wellbeing has been developed to provide a quick and easy applicable tool for legally required risk assessments. The results of a validation study show that this risk index seems to be a promising indicator for predicting risks of health complaints and wellbeing. The purpose of the Risk Index is to simplify the evaluation process at the shop floor and provide some more general information about the quality of a work schedule that can be used for triggering preventive interventions. Such a risk index complies with practitioners' expectations and requests for easy, useful, and valid instruments.

Preliminary Results of NASA's First Autonomous Formation Flying Experiment: Earth Observing-1 (EO-1)

NASA Technical Reports Server (NTRS)

Folta, David; Hawkins, Albin

2001-01-01

NASA's first autonomous formation flying mission is completing a primary goal of demonstrating an advanced technology called enhanced formation flying. To enable this technology, the Guidance, Navigation, and Control center at the Goddard Space Flight Center has implemented an autonomous universal three-axis formation flying algorithm in executive flight code onboard the New Millennium Program's (NMP) Earth Observing-1 (EO-1) spacecraft. This paper describes the mathematical background of the autonomous formation flying algorithm and the onboard design and presents the preliminary validation results of this unique system. Results from functionality assessment and autonomous maneuver control are presented as comparisons between the onboard EO-1 operational autonomous control system called AutoCon(tm), its ground-based predecessor, and a stand-alone algorithm.

Iowa Hydrologic and Environmental Validation Site: A Proposal to the Community

NASA Astrophysics Data System (ADS)

Bradley, A. A.; Ciach, G. J.; Eichinger, W. N.; Hornbuckle, K. C.; Illman, W.; Krajewski, W. F.; Kruger, A.; Patel, V. C.; Weirich, F. H.; Zhang, Y.

2002-05-01

We present a proposal to the hydrologic research community to establish a validation site in eastern Iowa. Many hydrological and meteorological variables observed using remote sensing techniques or predicted using numerical simulation models require validation. Validation, understood as quantification of the uncertainty, is difficult and often even impossible using operationally available in-situ observations. Specialized high-density networks of sensors with well-established error characteristics are required to serve as reference. We propose to establish a well-instrumented site for validation of several hydrometeorlogical and environmental variables near Iowa City, Iowa. We foresee this site as a national resource of detailed information collected in partnership with federal, state, and local agencies but independent of their routine mission oriented operations. The data would be distributed in real-time via the Internet to the research community nation wide to support model validation and development studies. In the presentation we justify the need for such sites, we make the case for setting a prototype site in Iowa, and we present preliminary considerations for the site's design and the data distribution system.

Development and preliminary testing of the Schizophrenia Hope Scale, a brief scale to measure hope in people with schizophrenia.

PubMed

Choe, Kwisoon

2014-06-01

Hope has received attention as a central component of recovery from mental illness; however, most instruments measuring hope were developed outside the mental health field. To measure the effects of mental health programs on hope in people with schizophrenia, a specialized scale is needed. This study examined the psychometric properties of the newly developed 9-item Schizophrenia Hope Scale (SHS-9) designed to measure hope in individuals with schizophrenia. A descriptive survey design. Participants were recruited from three psychiatric hospitals and two community mental health centers in South Korea. A total of 347 individuals over age 18 with a DSM-IV diagnosis of schizophrenia, schizoaffective, or schizophrenia spectrum disorders (competent to provide written informed consent) participated in this study; 149 (94 men, 55 women) completed a preliminary scale consisting of 40 revised items, and 198 (110 men, 88 women) completed the second scale of 17 items. Scale items were first selected from extensive literature reviews and a qualitative study on hope in people with schizophrenia; the validity and reliability of a preliminary scale was then evaluated by an expert panel and exploratory factor analysis. The remaining 9 items forming the Schizophrenia Hope Scale (SHS-9) were evaluated through confirmatory factor analysis. The SHS-9 demonstrates promising psychometric integrity. The internal consistency alpha coefficient was 0.92 with a score range of 0-18 and a mean total score of 12.06 (SD=4.96), with higher scores indicating higher levels of hope. Convergent validity was established by correlating the SHS-9 to the State-Trait Hope Inventory, r=0.61 (p<0.01). Divergent validity with the Beck Hopelessness Scale was also established, r=-0.55 (p<0.01). Exploratory and confirmatory factor analysis resulted in a 1-factor solution, with the essential meaning of hope accounting for 61.77% of the total item variance. As hope has been shown to facilitate recovery from mental illness, the accurate assessment of hope provided by the short, easy-to-use Schizophrenia Hope Scale (SHS-9) may aid clinicians in improving the quality of life of individuals with schizophrenia. Copyright © 2013 Elsevier Ltd. All rights reserved.

Preliminary Analysis of the BASALA-H Experimental Programme

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blaise, Patrick; Fougeras, Philippe; Philibert, Herve

2002-07-01

This paper is focused on the preliminary analysis of results obtained on the first cores of the first phase of the BASALA (Boiling water reactor Advanced core physics Study Aimed at mox fuel Lattice) programme, aimed at studying the neutronic parameters in ABWR core in hot conditions, currently under investigation in the French EOLE critical facility, within the framework of a cooperation between NUPEC, CEA and Cogema. The first 'on-line' analysis of the results has been made, using a new preliminary design and safety scheme based on the French APOLLO-2 code in its 2.4 qualified version and associated CEA-93 V4more » (JEF-2.2) Library, that will enable the Experimental Physics Division (SPEx) to perform future core designs. It describes the scheme adopted and the results obtained in various cases, going to the critical size determination to the reactivity worth of the perturbed configurations (voided, over-moderated, and poisoned with Gd{sub 2}O{sub 3}-UO{sub 2} pins). A preliminary study on the experimental results on the MISTRAL-4 is resumed, and the comparison of APOLLO-2 versus MCNP-4C calculations on these cores is made. The results obtained show very good agreements between the two codes, and versus the experiment. This work opens the way to the future full analysis of the experimental results of the qualifying teams with completely validated schemes, based on the new 2.5 version of the APOLLO-2 code. (authors)« less

Air STAR Beyond Visual Range UAS Description and Preliminary Test Results

NASA Technical Reports Server (NTRS)

Cunningham, Kevin; Cox, David E.; Foster, John V.; Riddick, Stephen E.; Laughter, Sean A.

2016-01-01

The NASA Airborne Subscale Transport Aircraft Research Unmanned Aerial System project's capabilities were expanded by updating the system design and concept of operations. The new remotely piloted airplane system design was flight tested to assess integrity and operational readiness of the design to perform flight research. The purpose of the system design is to improve aviation safety by providing a capability to validate, in high-risk conditions, technologies to prevent airplane loss of control. Two principal design requirements were to provide a high degree of reliability and that the new design provide a significant increase in test volume (relative to operations using the previous design). The motivation for increased test volume is to improve test efficiency and allow new test capabilities that were not possible with the previous design and concept of operations. Three successful test flights were conducted from runway 4-22 at NASA Goddard Space Flight Center's Wallops Flight Facility.

Brief Report: Preliminary Reliability, Construct Validity and Standardization of the Auditory Behavior Questionnaire (ABQ) for Children with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Egelhoff, Kelsey; Lane, Alison E.

2013-01-01

The Auditory Behavior Questionnaire (ABQ) evaluates abnormal behavioral responses to auditory stimulation in children with Autism Spectrum Disorder (ASD). This study reports preliminary reliability, construct validity and standardization of the ABQ. Parents of children with ASD aged 7-21 years (n = 165) completed the ABQ on-line. Cronbach's alpha…

Measurement of splanchnic photoplethysmographic signals using a new reflectance fiber optic sensor

NASA Astrophysics Data System (ADS)

Hickey, Michelle; Samuels, Neal; Randive, Nilesh; Langford, Richard M.; Kyriacou, Panayiotis A.

2010-03-01

Splanchnic organs are particularly vulnerable to hypoperfusion. Currently, there is no technique that allows for the continuous estimation of splanchnic blood oxygen saturation (SpO2). As a preliminary to developing a suitable splanchnic SpO2 sensor, a new reflectance fiber optic photoplethysmographic (PPG) sensor and processing system are developed. An experimental procedure to examine the effect of fiber source detector separation distance on acquired PPG signals is carried out before finalizing the sensor design. PPG signals are acquired from four volunteers for separation distances of 1 to 8 mm. The separation range of 3 to 6 mm provides the best quality PPG signals with large amplitudes and the highest signal-to-noise ratios (SNRs). Preliminary calculation of SpO2 shows that distances of 3 and 4 mm provide the most realistic values. Therefore, it is suggested that the separation distance in the design of a fiber optic reflectance pulse oximeter be in the range of 3 to 4 mm. Preliminary PPG signals from various splanchnic organs and the periphery are obtained from six anaesthetized patients. The normalized amplitudes of the splanchnic PPGs are, on average, approximately the same as those obtained simultaneously from the periphery. These observations suggest that fiber optic pulse oximetry may be a valid monitoring technique for splanchnic organs.

Jet-Surface Interaction: High Aspect Ratio Nozzle Test, Nozzle Design and Preliminary Data

NASA Technical Reports Server (NTRS)

Brown, Clifford; Dippold, Vance

2015-01-01

The Jet-Surface Interaction High Aspect Ratio (JSI-HAR) nozzle test is part of an ongoing effort to measure and predict the noise created when an aircraft engine exhausts close to an airframe surface. The JSI-HAR test is focused on parameters derived from the Turbo-electric Distributed Propulsion (TeDP) concept aircraft which include a high-aspect ratio mailslot exhaust nozzle, internal septa, and an aft deck. The size and mass flow rate limits of the test rig also limited the test nozzle to a 16:1 aspect ratio, half the approximately 32:1 on the TeDP concept. Also, unlike the aircraft, the test nozzle must transition from a single round duct on the High Flow Jet Exit Rig, located in the AeroAcoustic Propulsion Laboratory at the NASA Glenn Research Center, to the rectangular shape at the nozzle exit. A parametric nozzle design method was developed to design three low noise round-to-rectangular transitions, with 8:1, 12:1, and 16: aspect ratios, that minimizes flow separations and shocks while providing a flat flow profile at the nozzle exit. These designs validated using the WIND-US CFD code. A preliminary analysis of the test data shows that the actual flow profile is close to that predicted and that the noise results appear consistent with data from previous, smaller scale, tests. The JSI-HAR test is ongoing through October 2015. The results shown in the presentation are intended to provide an overview of the test and a first look at the preliminary results.

The NASA Lewis integrated propulsion and flight control simulator

NASA Technical Reports Server (NTRS)

Bright, Michelle M.; Simon, Donald L.

1991-01-01

A new flight simulation facility has been developed at NASA Lewis to allow integrated propulsion-control and flight-control algorithm development and evaluation in real time. As a preliminary check of the simulator facility and the correct integration of its components, the control design and physics models for an STOVL fighter aircraft model have been demonstrated, with their associated system integration and architecture, pilot vehicle interfaces, and display symbology. The results show that this fixed-based flight simulator can provide real-time feedback and display of both airframe and propulsion variables for validation of integrated systems and testing of control design methodologies and cockpit mechanizations.

Design and Analysis of Subscale and Full-Scale Buckling-Critical Cylinders for Launch Vehicle Technology Development

NASA Technical Reports Server (NTRS)

Hilburger, Mark W.; Lovejoy, Andrew E.; Thornburgh, Robert P.; Rankin, Charles

2012-01-01

NASA s Shell Buckling Knockdown Factor (SBKF) project has the goal of developing new analysis-based shell buckling design factors (knockdown factors) and design and analysis technologies for launch vehicle structures. Preliminary design studies indicate that implementation of these new knockdown factors can enable significant reductions in mass and mass-growth in these vehicles. However, in order to validate any new analysis-based design data or methods, a series of carefully designed and executed structural tests are required at both the subscale and full-scale levels. This paper describes the design and analysis of three different orthogrid-stiffeNed metallic cylindrical-shell test articles. Two of the test articles are 8-ft-diameter, 6-ft-long test articles, and one test article is a 27.5-ft-diameter, 20-ft-long Space Shuttle External Tank-derived test article.

Design and realization of retina-like three-dimensional imaging based on a MOEMS mirror

NASA Astrophysics Data System (ADS)

Cao, Jie; Hao, Qun; Xia, Wenze; Peng, Yuxin; Cheng, Yang; Mu, Jiaxing; Wang, Peng

2016-07-01

To balance conflicts for high-resolution, large-field-of-view and real-time imaging, a retina-like imaging method based on time-of flight (TOF) is proposed. Mathematical models of 3D imaging based on MOEMS are developed. Based on this method, we perform simulations of retina-like scanning properties, including compression of redundant information and rotation and scaling invariance. To validate the theory, we develop a prototype and conduct relevant experiments. The preliminary results agree well with the simulations.

The Preliminary Personnel Data Base Design for the Indonesian Navy.

DTIC Science & Technology

1982-06-01

external, which influence the * validity and success of this planning. Internal factors include all the problems which relate to the personnel sys - ton...the SIP-TNI-AL (Navy MIS) [Ref. 10], sys - *l tea’s users include the following: 1. Headquarters level: a) Manager level, b) Staff level, c) Central...Angeles: universTy -| ofcalizoara, April 1970. 10. Nabes TNI-AL ZiIT1a 11. Malone Joh S and Robert P. Thor of he Hhi!brator esearch Report SRR7

INFANT SIGN TRAINING AND FUNCTIONAL ANALYSIS

PubMed Central

Normand, Matthew P; Machado, Mychal A; Hustyi, Kristin M; Morley, Allison J

2011-01-01

We taught manual signs to typically developing infants using a reversal design and caregiver-nominated stimuli. We delivered the stimuli on a time-based schedule during baseline. During the intervention, we used progressive prompting and reinforcement, described by Thompson et al. (2004, 2007), to establish mands. Following sign training, we conducted functional analyses and verified that the signs functioned as mands. These results provide preliminary validation for the verbal behavior functional analysis methodology and further evidence of the functional independence of verbal operants. PMID:21709786

Validity and Reliability of Turkish Version of Gilliam Autism Rating Scale-2: Results of Preliminary Study

ERIC Educational Resources Information Center

Diken, Ibrahim H.; Diken, Ozlem; Gilliam, James E.; Ardic, Avsar; Sweeney, Dwight

2012-01-01

The purpose of this preliminary study was to explore the validity and reliability of Turkish Version of the Gilliam Autism Rating Scale-2 (TV-GARS-2). Participants included 436 children diagnosed with autism (331 male and 105 female, mean of ages was 8.01 with SD = 3.77). Data were also collected from individuals diagnosed with intellectual…

Development of Advanced Robotic Hand System for space application

NASA Technical Reports Server (NTRS)

Machida, Kazuo; Akita, Kenzo; Mikami, Tatsuo; Komada, Satoru

1994-01-01

The Advanced Robotic Hand System (ARH) is a precise telerobotics system with a semi dexterous hand for future space application. The ARH will be tested in space as one of the missions of the Engineering Tests Satellite 7 (ETS-7) which will be launched in 1997. The objectives of the ARH development are to evaluate the capability of a possible robot hand for precise and delicate tasks and to validate the related technologies implemented in the system. The ARH is designed to be controlled both from ground as a teleoperation and by locally autonomous control. This paper presents the overall system design and the functional capabilities of the ARH as well as its mission outline as the preliminary design has been completed.

Fracture Probability of MEMS Optical Devices for Space Flight Applications

NASA Technical Reports Server (NTRS)

Fettig, Rainer K.; Kuhn, Jonathan L.; Moseley, S. Harvey; Kutyrev, Alexander S.; Orloff, Jon

1999-01-01

A bending fracture test specimen design is presented for thin elements used in optical devices for space flight applications. The specimen design is insensitive to load position, avoids end effect complications, and can be used to measure strength of membranes less than 2 microns thick. The theoretical equations predicting stress at failure are presented, and a detailed finite element model is developed to validate the equations for this application. An experimental procedure using a focused ion beam machine is outlined, and results from preliminary tests of 1.9 microns thick single crystal silicon are presented. These tests are placed in the context of a methodology for the design and evaluation of mission critical devices comprised of large arrays of cells.

An assessment and validation study of nuclear reactors for low power space applications

NASA Technical Reports Server (NTRS)

Klein, A. C.; Gedeon, S. R.; Morey, D. C.

1987-01-01

The feasibility and safety of six conceptual small, low power nuclear reactor designs was evaluated. Feasibility evaluations included the determination of sufficient reactivity margins for seven years of full power operation and safe shutdown as well as handling during pre-launch assembly phases. Safety evaluations were concerned with the potential for maintaining subcritical conditions in the event of launch or transportation accidents. These included water immersion accident scenarios both with and without water flooding the core. Results show that most of the concepts can potentially meet the feasibility and safety requirements; however, due to the preliminary nature of the designs considered, more detailed designs will be necessary to enable these concepts to fully meet the safety requirements.

GSDO PDR (Preliminary Design Review) Morning Meeting

NASA Image and Video Library

2014-03-20

CAPE CANAVERAL, Fla. – Mike Bolger, program manager for the Ground Systems Development and Operations, or GSDO, Program speaks to participants during completion of the preliminary design review in the Mission Briefing Room inside the Operations and Checkout Building at NASA’s Kennedy Space Center in Florida. Representatives from NASA, its contractor partners and experts from across the aerospace industry met in the Mission Briefing Room inside the Operations and Checkout Building at NASA’s Kennedy Space Center in Florida to conclude the initial design and technology development phase. Completion of this review has validated that the baseline architecture is sound and aligns with the agency's exploration objectives. NASA is developing the Space Launch System and Orion spacecraft to provide an entirely new capability for human exploration beyond low-Earth orbit, with the flexibility to launch spacecraft for crew and cargo missions, including to an asteroid and Mars. Orion’s first unpiloted test flight is scheduled to launch later this year atop a Delta IV rocket. A second uncrewed flight test is scheduled for fiscal year 2018 on the Space Launch System rocket. For more information, visit http://www.nasa.gov/orion. Photo credit: NASA/Cory Huston

Visualization on triangle concept using Adobe Flash Professional SC6

NASA Astrophysics Data System (ADS)

Sagita, Laela; Ratih Kusumarini, Adha

2017-12-01

The purpose of this paper is to develop teaching aids using Adobe Flash Professional CS6 emphasize on Triangle concept. A new alternative way to deliver a basic concept in geometry with visualization is software Adobe Flash Professional CS 6. Research method is research and development with 5 phase of Ploom’s model, namely (1) preliminary, (2) design, (3) realization/ construction, (4) test, evaluation and revision, and 5) implementation. The results showed that teaching aids was valid, practice, and effective. Validity: expert judgement for material score is 3.95 and media expert judgement produce an average score of 3,2, both in the category are valid. Practically: the average of questionnaire response is 4,04 (good). Effectiveness: n-gain test value is 0,36 (medium). It concluded that developed of teaching aids using Adobe Flash CS6 on triangle can improve student achievement.

The Multidimensional Loss Scale: validating a cross-cultural instrument for measuring loss.

PubMed

Vromans, Lyn; Schweitzer, Robert D; Brough, Mark

2012-04-01

The Multidimensional Loss Scale (MLS) represents the first instrument designed specifically to index Experience of Loss Events and Loss Distress across multiple domains (cultural, social, material, and intrapersonal) relevant to refugee settlement. Recently settled Burmese adult refugees (N = 70) completed a questionnaire battery, including MLS items. Analyses explored MLS internal consistency, convergent and divergent validity, and factor structure. Cronbach alphas indicated satisfactory internal consistency for Experience of Loss Events (0.85) and Loss Distress (0.92), reflecting a unitary construct of multidimensional loss. Loss Distress did not correlate with depression or anxiety symptoms and correlated moderately with interpersonal grief and trauma symptoms, supporting divergent and convergent validity. Factor analysis provided preliminary support for a five-factor model: Loss of Symbolic Self, Loss of Interdependence, Loss of Home, Interpersonal Loss, and Loss of Intrapersonal Integrity. Received well by participants, the new scale shows promise for application in future research and practice.

Validez Convergente de la Version Espanola Preliminar del Child Abuse Potential Inventory: Depresion y Aduste Marital (Convergent Validity of the Preliminary Spanish Version of the Child Abuse Potential Inventory: Depression and Marital Adjustment).

ERIC Educational Resources Information Center

Arruabarrena, M. Ignacia; de Paul, Joaquin

1992-01-01

"Convergent validity" of preliminary Spanish version of Child Abuse Potential (CAP) Inventory was studied. CAP uses ecological-systemic model of child maltreatment to evaluate individual, family, and social factors facilitating physical child abuse. Depression and marital adjustment were measured in three groups of mothers. Results found…

The NASA Juncture Flow Experiment: Goals, Progress, and Preliminary Testing (Invited)

NASA Technical Reports Server (NTRS)

Rumsey, Christopher L.; Neuhart, Danny H.; Kegerise, Michael A.

2016-01-01

NASA has been working toward designing and conducting a juncture flow experiment on a wing-body aircraft configuration. The experiment is planned to provide validation-quality data for CFD that focuses on the onset and progression of a separation bubble near the wing-body juncture trailing edge region. This paper describes the goals and purpose of the experiment. Although currently considered unreliable, preliminary CFD analyses of several different configurations are shown. These configurations have been subsequently tested in a series of "risk-reduction" wind tunnel tests, in order to help down-select to a final configuration that will attain the desired flow behavior. The risk-reduction testing at the higher Reynolds number has not yet been completed (at the time of this writing), but some results from one of the low-Reynolds-number experiments are shown.

Preliminary Results From The First Flight of ATIC

NASA Technical Reports Server (NTRS)

Seo, E. S.; Whitaker, Ann F. (Technical Monitor)

2001-01-01

The Advanced Thin Ionization Calorimeter (ATIC) instrument is designed to measure the composition and energy spectra of Z = 1 to 28 cosmic rays over the energy range approximately 10 GeV - 100 TeV. The instrument was calibrated in September 1999 at CERN using accelerated electron, proton and pion beams. ATIC was launched as a long duration balloon test flight on 12/28/00 local time from McMurdo, Antarctica. After flying successfully for about 16 days the payload was recovered in excellent condition. Absolute calibration of the detector response was made using cosmic-ray muons. The data analysis algorithm which was developed with Monte Carlo simulations and validated with the CERN beam test will be used for the flight data analysis. Preliminary results of the proton and helium spectra will be reported in this paper.

Preliminary Results From the First Flight of ATIC

NASA Technical Reports Server (NTRS)

Seo, E. S.; Adams, James H., Jr.; Ahn, H.; Ampe, J.; Bashindzhagyan, G.; Case, G.; Whitaker, Ann F. (Technical Monitor)

2001-01-01

The Advanced Thin Ionization Calorimeter (ATIC) instrument is designed to measure the composition C and energy spectra of Z = 1 to 28 cosmic rays over the energy range approximately 10 GeV - 100 TeV. The instrument was calibrated in September 1999 at CERN using accelerated electron, proton and pion beams. ATIC was launched as a long duration balloon test flight on 12/28/00 local time from McMurdo, Antarctica. After flying successfully for about 16 days the payload was recovered in excellent condition. Absolute calibration of the detector response was made using cosmic-ray muons. The data analysis algorithm which was developed with Monte Carlo simulations and validated with the CERN beam test will be used for the flight data analysis. Preliminary results of the protons and C helium spectra will be reported in this paper.

Measuring appraisals following acquired spinal cord injury: a preliminary psychometric analysis of the appraisals of disability.

PubMed

Dean, R E; Kennedy, Paul

2009-05-01

The current study aimed to develop a reliable and valid appraisal scale (The Appraisals of DisAbility: Primary and Secondary Scale; ADAPSS) for adult spinal cord injury (SCI) populations. Items for the ADAPSS were generated using themes and quotes from a qualitative study exploring appraisals made by individuals with SCI. The ADAPSS was administered with 2 additional appraisal measures, a measure of anxiety and depression, a measure of social desirability and demographic information. The study used a cross-sectional questionnaire design with a test-retest component, sampling community-based individuals with SCI. Data analysis was undertaken on 237 completed questionnaires. Factor analysis revealed the ADAPSS to have a 6-factor structure and the following subscales identified: (a) Fearful Despondency, (b) Overwhelming Disbelief, (c) Determined Resolve, (d) Growth and Resilience, (e) Negative Perceptions of Disability, and (f) Personal Agency. Preliminary analyses suggest the ADAPSS demonstrates reasonable reliability and validity and has potential as a therapeutic outcome measure. Future research should focus on the relationship between appraisals identified on the ADAPSS and their relationship to the coping strategies that individuals employ and adjustment to SCI. (PsycINFO Database Record (c) 2009 APA, all rights reserved).

Developing a self-rating measure of patient competence in the context of oncology: a multi-center study.

PubMed

Giesler, Jürgen M; Weis, Joachim

2008-11-01

Concepts of patient competence (PC) are being increasingly used, but seldom clearly defined in the context of shared medical treatment decision making and coping with cancer. The meaning of such concepts should therefore be clarified, and measures developed that permit the assessment of different facets of this patient characteristic. Consequently, this study attempted to contribute to the definition and measurement of PC. Employing literature reviews and qualitative interviews, we developed a working definition of PC in the context of cancer from which we designed a self-rating measure of this patient characteristic that was then tested for validity and reliability in a sample of N=536 patients with cancer. Using factor analyses, we developed five problem- and three emotion-focused subscales that measure distinct facets of PC with satisfactory reliability. Additional analyses provide preliminary evidence of the instruments' validity. This study represents an essential first step in developing a reliable self-rating measure of PC in the context of cancer. Although further refinement of this measure is clearly required, it provides a preliminary methodological basis for empirically investigating the determinants and potential health effects of PC. (c) 2008 John Wiley & Sons, Ltd.

A pilot investigation of the Motivation Behaviors Checklist (MBC): An observational rating scale of effort towards testing for baseline sports-concussion assessment.

PubMed

Rabinowitz, Amanda R; Merritt, Victoria; Arnett, Peter A

2016-08-01

Baseline neuropsychological testing is commonly used in the management of sports-related concussion. However, underperformance due to poor effort could lead to invalid conclusions regarding postconcussion cognitive decline. We designed the Motivation Behaviors Checklist (MBC) as an observational rating scale to assess effort towards baseline neuropsychological testing. Here we present preliminary data in support of its reliability and validity. MBC items were generated based on the consensus of a panel of graduate students, undergraduates, and a clinical neuropsychologist who conduct neuropsychological evaluations for a sports concussion management program. A total of 261 college athletes were administered a standard neuropsychological test battery in addition to the MBC. A subset of evaluations (n= 101) was videotape and viewed by a second rater. Exploratory factor analysis (EFA) was used to refine the scale, and reliability and validity were evaluated. EFA revealed that the MBC items represent four latent factors-Complaints, Poor Focus, Psychomotor Agitation, and Impulsivity. Reliability analyses demonstrated that the MBC has good inter-rater reliability (intraclass correlation coefficient, ICC = .767) and internal consistency (α = .839). The construct validity of the MBC is supported by large correlations with examiners' ratings of effort (ρ = -.623) and medium-sized relationships with cognitive performance and self-ratings of effort (|ρ| between .263 and .345). Discriminant validity was supported by nonsignificant correlations with measures of depression and postconcussion symptoms (ρ = .056 and .082, respectively). These findings provide preliminary evidence that the MBC could be a useful adjunct to baseline neuropsychological evaluations for sports-concussion management.

Translation and validation of a Spanish-language genetic health literacy screening tool.

PubMed

Rodríguez, Sally Ann; Roter, Debra L; Castillo-Salgado, Carlos; Hooker, Gillian W; Erby, Lori H

2015-02-01

Literacy deficits and underutilization of medical services have been linked to health disparities among minorities, and this appears especially relevant for the Latino population. Given the increasing importance of genetics, assessment of genetic health literacy may direct future efforts to better serve this vulnerable population. The current study was designed to contribute to this area by translating and validating a Spanish-language genetic health literacy measure. This was a cross-sectional study involving an interviewer-administered questionnaire. Eligible individuals were Latinos between the ages of 18 and 75 residing in Maryland, who self-reported Spanish as their primary language, recruited through convenience sampling. The genetic health literacy measure components were adapted from existing English-language measures [Erby, Roter, Larson, & Cho's (2008) Rapid Estimate of Adult Literacy in Genetics (REAL-G) and Hooker et al.'s (2014) Genetic Literacy and Comprehension]. An existing Spanish-language general health literacy measure was used to establish preliminary concurrent validity [Lee, Bender, Ruiz, & Cho's (2006) SAHLSA]. 116 individuals completed the assessment. The Spanish-language REAL-G (REAL-G-Sp) was found to correlate well with the SAHLSA (Pearson's r = .77, p < .01). A cut-off score of 59 (out of 62) distinguished low versus high genetic health literacy with a sensitivity of 86% and specificity of 71%, identifying 28% of participants as having inadequate genetic health literacy. The REAL-G-Sp was found to have preliminary concurrent validity with an existing health literacy measure in the Latino population residing in Maryland. Significant proportions of this population are predicted to have limitations in genetic health literacy, even when information is provided in Spanish.

The Worry Behaviors Inventory: Assessing the behavioral avoidance associated with generalized anxiety disorder.

PubMed

Mahoney, Alison E J; Hobbs, Megan J; Newby, Jill M; Williams, Alishia D; Sunderland, Matthew; Andrews, Gavin

2016-10-01

Understanding behavioral avoidance associated with generalized anxiety disorder (GAD) has implications for the classification, theoretical conceptualization, and clinical management of the disorder. This study describes the development and preliminary psychometric evaluation of a self-report measure of avoidant behaviors associated with GAD: the Worry Behaviors Inventory (WBI). The WBI was administered to treatment-seeking patients (N=1201). Convergent validity was assessed by correlating the WBI with measures of GAD symptom severity. Divergent validity was assessed by correlating the WBI with measures of general disability and measures of depression, social anxiety and panic disorder symptom severity. Exploratory and confirmatory factor analyses supported a two-factor structure (Safety Behaviors and Avoidance). Internal reliability was acceptable for the 10-item WBI scale (α=.86), Safety Behaviors (α=.85) and Avoidance subscales (α=.75). Evidence of convergent, divergent, and discriminant validity is reported. WBI subscales demonstrated differential associations with measures of symptom severity. The Safety Behaviors subscale was more strongly associated with GAD symptoms than symptoms of other disorders, whereas the Avoidance subscale was as strongly correlated with GAD severity as it was with depression, social anxiety and panic disorder severity. Structured diagnostic interviews were not conducted therefor validity analyses are limited to probable diagnoses based on self-report. The cross-sectional design precluded examination of the WBI's temporal stability and treatment sensitivity. Preliminary evidence supports the use of the WBI in research and clinical settings and may assist clinicians to identify behaviors that are theorized to maintain GAD and that can be targeted during psychological treatment. Copyright © 2016 Elsevier B.V. All rights reserved.

An Open-Structure Treadmill Gait Trainer: From Research to Application.

PubMed

Li, Jian; Chen, Diansheng; Fan, Yubo

2017-01-01

Lower limb rehabilitation robots are designed to enhance gait function in individuals with motor impairments. Although numerous rehabilitation robots have been developed, only few of these robots have been used in practical health care, particularly in China. The objective of this study is to construct a lower limb rehabilitation robot and bridge the gap between research and application. Open structure to facilitate practical application was created for the whole robot. Three typical movement patterns of a single leg were adopted in designing the exoskeletons, and force models for patient training were established and analyzed under three different conditions, respectively, and then a control system and security strategy were introduced. After establishing the robot, a preliminary experiment on the actual use of a prototype by patients was conducted to validate the functionality of the robot. The experiment showed that different patients and stages displayed different performances, and results on the trend variations across patients and across stages confirmed the validity of the robot and suggested that the design may lead to a system that could be successful in the treatment of patients with walking disorders in China. Furthermore, this study could provide a reference for a similar application design.

Development and testing of the 'Culture of Care Barometer' (CoCB) in healthcare organisations: a mixed methods study.

PubMed

Rafferty, Anne Marie; Philippou, Julia; Fitzpatrick, Joanne M; Pike, Geoff; Ball, Jane

2017-08-18

Concerns about care quality have prompted calls to create workplace cultures conducive to high-quality, safe and compassionate care and to provide a supportive environment in which staff can operate effectively. How healthcare organisations assess their culture of care is an important first step in creating such cultures. This article reports on the development and validation of a tool, the Culture of Care Barometer, designed to assess perceptions of a caring culture among healthcare workers preliminary to culture change. An exploratory mixed methods study designed to develop and test the validity of a tool to measure 'culture of care' through focus groups and questionnaires. Questionnaire development was facilitated through: a literature review, experts generating items of interest and focus group discussions with healthcare staff across specialities, roles and seniority within three types of public healthcare organisations in the UK. The tool was designed to be multiprofessional and pilot tested with a sample of 467 nurses and healthcare support workers in acute care and then validated with a sample of 1698 staff working across acute, mental health and community services in England. Exploratory factor analysis was used to identify dimensions underlying the Barometer. Psychometric testing resulted in the development of a 30-item questionnaire linked to four domains with retained items loading to four factors: organisational values (α=0.93, valid n=1568, M=3.7), team support (α=0.93, valid n=1557, M=3.2), relationships with colleagues (α=0.84, valid n=1617, M=4.0) and job constraints (α=0.70, valid n=1616, M=3.3). The study developed a valid and reliable instrument with which to gauge the different attributes of care culture perceived by healthcare staff with potential for organisational benchmarking. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Design and Evaluation of the Psychometric Properties of a Paternal Adaptation Questionnaire.

PubMed

Eskandari, Narges; Simbar, Masoumeh; Vadadhir, AbouAli; Baghestani, Ahmad Reza

2016-07-25

The present study aimed to design and evaluate the psychometric properties of the Paternal Adaptation Questionnaire (PAQ). The study was a mixed (qualitative and quantitative) sequential exploratory study. In the qualitative phase, a preliminary questionnaire with 210 items emerged from in-depth interviews with 17 fathers and 15 key informants. In the quantitative phase, psychometric properties of the PAQ were assessed. Considering cutoff points as 1.5 for item impact, 0.49 for content validity ratio (CVR), and 0.7 for content validity index (CVI), items of the questionnaire were reduced from 210 to 132. Assessment of the content validity of the questionnaire demonstrated S-CVR = 0.68 and S-CVI = 0.92. Exploratory factor analysis resulted in the development of a PAQ with 38 items classified under five factors (ability in performing the roles and responsibilities; perceiving the parental development; stabilization in paternal position; spiritual stability and internal satisfaction; and challenges and concerns), which explained 52.19% of cumulative variance. Measurement of internal consistency reported a Cronbach's α of .89 for PAQ (.61-.86 for subscales), and stability assessment of the PAQ through the test-retest demonstrated Spearman's correlation coefficients and intraclass correlation coefficient of .96 (.81-.97 for subscales). It was identified that the PAQ is a valid and reliable instrument that could be used to assess fatherhood adaptation with the paternal roles and fathers' needs, as well as to design appropriate interventions and to evaluate their effectiveness. © The Author(s) 2016.

Concentrating solar collector subsystem: Preliminary design package

NASA Technical Reports Server (NTRS)

1977-01-01

Preliminary design data are presented for a concentrating solar collector including an attitude controller. Provided are schedules, technical status, all documents required for preliminary design, and other program activities.

Use of Taguchi design of experiments to optimize and increase robustness of preliminary designs

NASA Technical Reports Server (NTRS)

Carrasco, Hector R.

1992-01-01

The research performed this summer includes the completion of work begun last summer in support of the Air Launched Personnel Launch System parametric study, providing support on the development of the test matrices for the plume experiments in the Plume Model Investigation Team Project, and aiding in the conceptual design of a lunar habitat. After the conclusion of last years Summer Program, the Systems Definition Branch continued with the Air Launched Personnel Launch System (ALPLS) study by running three experiments defined by L27 Orthogonal Arrays. Although the data was evaluated during the academic year, the analysis of variance and the final project review were completed this summer. The Plume Model Investigation Team (PLUMMIT) was formed by the Engineering Directorate to develop a consensus position on plume impingement loads and to validate plume flowfield models. In order to obtain a large number of individual correlated data sets for model validation, a series of plume experiments was planned. A preliminary 'full factorial' test matrix indicated that 73,024 jet firings would be necessary to obtain all of the information requested. As this was approximately 100 times more firings than the scheduled use of Vacuum Chamber A would permit, considerable effort was needed to reduce the test matrix and optimize it with respect to the specific objectives of the program. Part of the First Lunar Outpost Project deals with Lunar Habitat. Requirements for the habitat include radiation protection, a safe haven for occasional solar flare storms, an airlock module as well as consumables to support 34 extra vehicular activities during a 45 day mission. The objective for the proposed work was to collaborate with the Habitat Team on the development and reusability of the Logistics Modules.

Embedded algorithms within an FPGA-based system to process nonlinear time series data

NASA Astrophysics Data System (ADS)

Jones, Jonathan D.; Pei, Jin-Song; Tull, Monte P.

2008-03-01

This paper presents some preliminary results of an ongoing project. A pattern classification algorithm is being developed and embedded into a Field-Programmable Gate Array (FPGA) and microprocessor-based data processing core in this project. The goal is to enable and optimize the functionality of onboard data processing of nonlinear, nonstationary data for smart wireless sensing in structural health monitoring. Compared with traditional microprocessor-based systems, fast growing FPGA technology offers a more powerful, efficient, and flexible hardware platform including on-site (field-programmable) reconfiguration capability of hardware. An existing nonlinear identification algorithm is used as the baseline in this study. The implementation within a hardware-based system is presented in this paper, detailing the design requirements, validation, tradeoffs, optimization, and challenges in embedding this algorithm. An off-the-shelf high-level abstraction tool along with the Matlab/Simulink environment is utilized to program the FPGA, rather than coding the hardware description language (HDL) manually. The implementation is validated by comparing the simulation results with those from Matlab. In particular, the Hilbert Transform is embedded into the FPGA hardware and applied to the baseline algorithm as the centerpiece in processing nonlinear time histories and extracting instantaneous features of nonstationary dynamic data. The selection of proper numerical methods for the hardware execution of the selected identification algorithm and consideration of the fixed-point representation are elaborated. Other challenges include the issues of the timing in the hardware execution cycle of the design, resource consumption, approximation accuracy, and user flexibility of input data types limited by the simplicity of this preliminary design. Future work includes making an FPGA and microprocessor operate together to embed a further developed algorithm that yields better computational and power efficiency.

[Preventable drug-related morbidity: determining valid indicators for primary care in Portugal].

PubMed

Guerreiro, Mara Pereira; Cantrill, Judith A; Martins, Ana Paula

2007-01-01

Preventable drug-related morbidity (PDRM) indicators are operational measures of therapeutic risk management. These clinical indicators, which cover a wide range of drugs, combine process and outcome in the same instrument. They were developed in the US and have been validated for primary care settings in the US, UK and Canada. This study is part of a research programme; it aimed to determine a valid set of PDRM indicators for adult patients in primary care in Portugal. Face validity of 61 US and UK-derived indicators translated to Portuguese was preliminarily determined by means of a postal questionnaire using a purposive sample of four Portuguese pharmacists with different backgrounds. Preliminary content validity of indicators approved in the previous stage was determined by cross-checking each definition of PDRM with standard drug information sources in Portugal. Face and content validity of indicators yielded by preliminary work were then established by a 37 expert panel (20 community pharmacists and 17 general practitioners) using a two-round Delphi survey. Data were analysed using SPSS release 11.5. Nineteen indicators were ruled out in preliminary validation. Changes were made in the content of eight of the remaining 42 indicators; these were related to differences in the drugs being marketed and patterns of drug monitoring between countries. Thirty-five indicators were consensus approved as PDRM for adult patients in Portuguese primary care by the Delphi panel.

Preliminary design, analysis, and costing of a dynamic scale model of the NASA space station

NASA Technical Reports Server (NTRS)

Gronet, M. J.; Pinson, E. D.; Voqui, H. L.; Crawley, E. F.; Everman, M. R.

1987-01-01

The difficulty of testing the next generation of large flexible space structures on the ground places an emphasis on other means for validating predicted on-orbit dynamic behavior. Scale model technology represents one way of verifying analytical predictions with ground test data. This study investigates the preliminary design, scaling and cost trades for a Space Station dynamic scale model. The scaling of nonlinear joint behavior is studied from theoretical and practical points of view. Suspension system interaction trades are conducted for the ISS Dual Keel Configuration and Build-Up Stages suspended in the proposed NASA/LaRC Large Spacecraft Laboratory. Key issues addressed are scaling laws, replication vs. simulation of components, manufacturing, suspension interactions, joint behavior, damping, articulation capability, and cost. These issues are the subject of parametric trades versus the scale model factor. The results of these detailed analyses are used to recommend scale factors for four different scale model options, each with varying degrees of replication. Potential problems in constructing and testing the scale model are identified, and recommendations for further study are outlined.

Micrometeoroid and Orbital Debris (MMOD) Shield Ballistic Limit Analysis Program

NASA Technical Reports Server (NTRS)

Ryan, Shannon

2013-01-01

This software implements penetration limit equations for common micrometeoroid and orbital debris (MMOD) shield configurations, windows, and thermal protection systems. Allowable MMOD risk is formulated in terms of the probability of penetration (PNP) of the spacecraft pressure hull. For calculating the risk, spacecraft geometry models, mission profiles, debris environment models, and penetration limit equations for installed shielding configurations are required. Risk assessment software such as NASA's BUMPERII is used to calculate mission PNP; however, they are unsuitable for use in shield design and preliminary analysis studies. The software defines a single equation for the design and performance evaluation of common MMOD shielding configurations, windows, and thermal protection systems, along with a description of their validity range and guidelines for their application. Recommendations are based on preliminary reviews of fundamental assumptions, and accuracy in predicting experimental impact test results. The software is programmed in Visual Basic for Applications for installation as a simple add-in for Microsoft Excel. The user is directed to a graphical user interface (GUI) that requires user inputs and provides solutions directly in Microsoft Excel workbooks.

Preliminary design package for Sunair SEC-601 solar collector

NASA Technical Reports Server (NTRS)

1978-01-01

The preliminary design of the Owens-Illinois model Sunair SEC-601 tubular air solar collector is presented. Information in this package includes the subsystem design and development approaches, hazard analysis, and detailed drawings available as the preliminary design review.

Stirling cryocooler test results and design model verification

NASA Astrophysics Data System (ADS)

Shimko, Martin A.; Stacy, W. D.; McCormick, John A.

A long-life Stirling cycle cryocooler being developed for spaceborne applications is described. The results from tests on a preliminary breadboard version of the cryocooler used to demonstrate the feasibility of the technology and to validate the generator design code used in its development are presented. This machine achieved a cold-end temperature of 65 K while carrying a 1/2-W cooling load. The basic machine is a double-acting, flexure-bearing, split Stirling design with linear electromagnetic drives for the expander and compressors. Flat metal diaphragms replace pistons for sweeping and sealing the machine working volumes. The double-acting expander couples to a laminar-channel counterflow recuperative heat exchanger for regeneration. The PC-compatible design code developed for this design approach calculates regenerator loss, including heat transfer irreversibilities, pressure drop, and axial conduction in the regenerator walls. The code accurately predicted cooler performance and assisted in diagnosing breadboard machine flaws during shakedown and development testing.

Development of a self-report questionnaire designed for population-based surveillance of gingivitis in adolescents: assessment of content validity and reliability.

PubMed

Quiroz, Viviana; Reinero, Daniela; Hernández, Patricia; Contreras, Johanna; Vernal, Rolando; Carvajal, Paola

2017-01-01

This study aimed to develop and assess the content validity and reliability of a cognitively adapted self-report questionnaire designed for surveillance of gingivitis in adolescents. Ten predetermined self-report questions evaluating early signs and symptoms of gingivitis were preliminary assessed by a panel of clinical experts. Eight questions were selected and cognitively tested in 20 adolescents aged 12 to 18 years from Santiago de Chile. The questionnaire was then conducted and answered by 178 Chilean adolescents. Internal consistency was measured using the Cronbach's alpha and temporal stability was calculated using the Kappa-index. A reliable final self-report questionnaire consisting of 5 questions was obtained, with a total Cronbach's alpha of 0.73 and a Kappa-index ranging from 0.41 to 0.77 between the different questions. The proposed questionnaire is reliable, with an acceptable internal consistency and a temporal stability from moderate to substantial, and it is promising for estimating the prevalence of gingivitis in adolescents.

Parallel LC circuit model for multi-band absorption and preliminary design of radiative cooling.

PubMed

Feng, Rui; Qiu, Jun; Liu, Linhua; Ding, Weiqiang; Chen, Lixue

2014-12-15

We perform a comprehensive analysis of multi-band absorption by exciting magnetic polaritons in the infrared region. According to the independent properties of the magnetic polaritons, we propose a parallel inductance and capacitance(PLC) circuit model to explain and predict the multi-band resonant absorption peaks, which is fully validated by using the multi-sized structure with identical dielectric spacing layer and the multilayer structure with the same strip width. More importantly, we present the application of the PLC circuit model to preliminarily design a radiative cooling structure realized by merging several close peaks together. This omnidirectional and polarization insensitive structure is a good candidate for radiative cooling application.

Assessment of nuclear reactor concepts for low power space applications

NASA Technical Reports Server (NTRS)

Klein, Andrew C.; Gedeon, Stephen R.; Morey, Dennis C.

1988-01-01

The results of a preliminary small reactor concepts feasibility and safety evaluation designed to provide a first order validation of the nuclear feasibility and safety of six small reactor concepts are given. These small reactor concepts have potential space applications for missions in the 1 to 20 kWe power output range. It was concluded that low power concepts are available from the U.S. nuclear industry that have the potential for meeting both the operational and launch safety space mission requirements. However, each design has its uncertainties, and further work is required. The reactor concepts must be mated to a power conversion technology that can offer safe and reliable operation.

An analysis of electronic document management in oncology care.

PubMed

Poulter, Thomas; Gannon, Brian; Bath, Peter A

2012-06-01

In this research in progress, a reference model for the use of electronic patient record (EPR) systems in oncology is described. The model, termed CICERO, comprises technical and functional components, and emphasises usability, clinical safety and user acceptance. One of the functional components of the model-an electronic document and records management (EDRM) system-is monitored in the course of its deployment at a leading oncology centre in the UK. Specifically, the user requirements and design of the EDRM solution are described.The study is interpretative and forms part a wider research programme to define and validate the CICERO model. Preliminary conclusions confirm the importance of a socio-technical perspective in Onco-EPR system design.

Developing a preliminary 'never event' list for general practice using consensus-building methods.

PubMed

de Wet, Carl; O'Donnell, Catherine; Bowie, Paul

2014-03-01

The 'never event' concept has been implemented in many acute hospital settings to help prevent serious patient safety incidents. Benefits include increasing awareness of highly important patient safety risks among the healthcare workforce, promoting proactive implementation of preventive measures, and facilitating incident reporting. To develop a preliminary list of never events for general practice. Application of a range of consensus-building methods in Scottish and UK general practices. A total of 345 general practice team members suggested potential never events. Next, 'informed' staff (n =15) developed criteria for defining never events and applied the criteria to create a list of candidate never events. Finally, UK primary care patient safety 'experts' (n = 17) reviewed, refined, and validated a preliminary list via a modified Delphi group and by completing a content validity index exercise. There were 721 written suggestions received as potential never events. Thematic categorisation reduced this to 38. Five criteria specific to general practice were developed and applied to produce 11 candidate never events. The expert group endorsed a preliminary list of 10 items with a content validity index (CVI) score of >80%. A preliminary list of never events was developed for general practice through practitioner experience and consensus-building methods. This is an important first step to determine the potential value of the never event concept in this setting. It is now intended to undertake further testing of this preliminary list to assess its acceptability, feasibility, and potential usefulness as a safety improvement intervention.

Design, analysis, and test verification of advanced encapsulation systems

NASA Technical Reports Server (NTRS)

Mardesich, N.; Minning, C.

1982-01-01

Design sensitivities are established for the development of photovoltaic module criteria and the definition of needed research tasks. The program consists of three phases. In Phase I, analytical models were developed to perform optical, thermal, electrical, and structural analyses on candidate encapsulation systems. From these analyses several candidate systems will be selected for qualification testing during Phase II. Additionally, during Phase II, test specimens of various types will be constructed and tested to determine the validity of the analysis methodology developed in Phase I. In Phse III, a finalized optimum design based on knowledge gained in Phase I and II will be developed. All verification testing was completed during this period. Preliminary results and observations are discussed. Descriptions of the thermal, thermal structural, and structural deflection test setups are included.

The preliminary analysis of the reliability and validity of the Chinese Edition of the CSBS DP.

PubMed

Lin, Chu-Sui; Chang, Shu-Hui; Cheng, Shu-Fen; Chao, Pen-Chiang; Chiu, Chun-Hao

2015-03-01

This study marked a preliminary attempt to standardize the Chinese Edition of the Communication and Symbolic Behavior Scales Developmental Profile (Wetherby & Prizant, 2002; CSBS DP) to assist in the early identification of young children with special needs in Taiwan. The study was conducted among 171 infants and toddlers aged 1-2. It also included a follow-up study one year after the initial test. Three domestically developed standardized child development inventories were used to measure the concurrent validity and predictive validity. The Chinese Edition of the CSBS DP demonstrated overall good test-retest and inter-rater reliability. It also showed good concurrent and predictive validity. The current study yields preliminary evidence that the Chinese Edition of the CSBS DP could be a valuable assessment tool worthy of wider distribution. Future research should employ random sampling to establish a true national norm. Additionally, the follow-up study needs to include atypical groups and to expand to children aged 6-12 months to strengthen the applicability of the instrument in Taiwan. Copyright © 2014 Elsevier Ltd. All rights reserved.

Development of an Integrated Nozzle for a Symmetric, RBCC Launch Vehicle Configuration

NASA Technical Reports Server (NTRS)

Smith, Timothy D.; Canabal, Francisco, III; Rice, Tharen; Blaha, Bernard

2000-01-01

The development of rocket based combined cycle (RBCC) engines is highly dependent upon integrating several different modes of operation into a single system. One of the key components to develop acceptable performance levels through each mode of operation is the nozzle. It must be highly integrated to serve the expansion processes of both rocket and air-breathing modes without undue weight, drag, or complexity. The NASA GTX configuration requires a fixed geometry, altitude-compensating nozzle configuration. The initial configuration, used mainly to estimate weight and cooling requirements was a 1 So half-angle cone, which cuts a concave surface from a point within the flowpath to the vehicle trailing edge. Results of 3-D CFD calculations on this geometry are presented. To address the critical issues associated with integrated, fixed geometry, multimode nozzle development, the GTX team has initiated a series of tasks to evolve the nozzle design, and validate performance levels. An overview of these tasks is given. The first element is a design activity to develop tools for integration of efficient expansion surfaces With the existing flowpath and vehicle aft-body, and to develop a second-generation nozzle design. A preliminary result using a "streamline-tracing" technique is presented. As the nozzle design evolves, a combination of 3-D CFD analysis and experimental evaluation will be used to validate the design procedure and determine the installed performance for propulsion cycle modeling. The initial experimental effort will consist of cold-flow experiments designed to validate the general trends of the streamline-tracing methodology and anchor the CFD analysis. Experiments will also be conducted to simulate nozzle performance during each mode of operation. As the design matures, hot-fire tests will be conducted to refine performance estimates and anchor more sophisticated reacting-flow analysis.

A structured interview for the DSM-III personality disorders. A preliminary report.

PubMed

Stangl, D; Pfohl, B; Zimmerman, M; Bowers, W; Corenthal, C

1985-06-01

With few exceptions, published studies fail to indicate that the DSM-III personality disorders can be distinguished from each other with respect to etiology, prognosis, treatment response, or family history. The Structured Interview for the DSM-III Personality Disorders (SIDP) was developed to improve axis II diagnostic reliability, and hence allow validity testing of axis II. Sixty-three subjects were independently rated by two interviewers using the SIDP. The kappa coefficients for interrater agreement reached .70 or higher for histrionic, borderline, and dependent personalities. While it is impossible to separate the validity testing of the SIDP from validity testing of the DSM-III personality criteria themselves, preliminary results from 102 inpatient SIDP interviews suggest some criterion-based validity with respect to standard personality rating scales and some construct validity with respect to the dexamethasone suppression test.

Experimental and analytical investigation of active loads control for aircraft landing gear

NASA Technical Reports Server (NTRS)

Morris, D. L.; Mcgehee, J. R.

1983-01-01

A series hydraulic, active loads control main landing gear from a light, twin-engine civil aircraft was investigated. Tests included landing impact and traversal of simulated runway roughness. It is shown that the active gear is feasible and very effective in reducing the force transmitted to the airframe. Preliminary validation of a multidegree of freedom active gear flexible airframe takeoff and landing analysis computer program, which may be used as a design tool for active gear systems, is accomplished by comparing experimental and computed data for the passive and active gears.

European Portuguese Adaptation of Glasgow Content of Thoughts Inventory (GCTI): Psychometric Characterization in Higher Education Students.

PubMed

Marques, Daniel R; Meia-Via, Mariana S; Espie, Colin A; da Silva, Carlos F; Allen Gomes, Ana

2018-01-01

Persistent cognitive activity is an important factor in disturbing sleep-onset both during bedtime and when attempting to get back to sleep after nocturnal awakenings. One of the most specific self-report measures designed to assess this feature is the Glasgow Content of Thoughts Inventory (GCTI). In this study, we investigated the preliminary psychometric properties of GCTI in a large sample of higher education European Portuguese students (N = 2995). Our results suggest that there is evidence of good internal consistency (α = 0.93) and validity indicators. Moreover, we found an interpretable factorial structure comprising 5 correlated factors that needs to be confirmed in future studies. The European Portuguese version of the GCTI appears to be a reliable and valid instrument for measurement of sleep-onset disturbing cognitions.

The Anaclitic-Introjective Depression Assessment: Development and preliminary validity of an observer-rated measure.

PubMed

Rost, Felicitas; Luyten, Patrick; Fonagy, Peter

2018-03-01

The two-configurations model developed by Blatt and colleagues offers a comprehensive conceptual and empirical framework for understanding depression. This model suggests that depressed patients struggle, at different developmental levels, with issues related to dependency (anaclitic issues) or self-definition (introjective issues), or a combination of both. This paper reports three studies on the development and preliminary validation of the Anaclitic-Introjective Depression Assessment, an observer-rated assessment tool of impairments in relatedness and self-definition in clinical depression based on the item pool of the Shedler-Westen Assessment Procedure. Study 1 describes the development of the measure using expert consensus rating and Q-methodology. Studies 2 and 3 report the assessment of its psychometric properties, preliminary reliability, and validity in a sample of 128 patients diagnosed with treatment-resistant depression. Four naturally occurring clusters of depressed patients were identified using Q-factor analysis, which, overall, showed meaningful and theoretically expected relationships with anaclitic/introjective prototypes as formulated by experts, as well as with clinical, social, occupational, global, and relational functioning. Taken together, findings reported in this paper provide preliminary evidence for the reliability and validity of the Anaclitic-Introjective Depression Assessment, an observer-rated measure that allows the detection of important nuanced differentiations between and within anaclitic and introjective depression. Copyright © 2017 John Wiley & Sons, Ltd.

Preliminary assessment of the ATHENA/WFI non-X-ray background

NASA Astrophysics Data System (ADS)

Perinati, Emanuele; Barbera, Marco; Diebold, Sebastian; Guzman, Alejandro; Santangelo, Andrea; Tenzer, Chris

2017-12-01

We present a preliminary assessment of the non-X-ray background for the WFI on board ATHENA conducted at IAAT in the context of the collaborative background and radiation damage working group activities. Our main result is that in the baseline configuration originally assumed for the camera the requirement on the level of non-X-ray background could not be met. In light of the results of Geant4 simulations we propose and discuss a possible optimization of the camera design and pinpoint some open issues to be addressed in the next phase of investigation. One of these concerns the possible contribution to the non-X-ray background from soft protons and ions funneled to the focal plane through the optics. This is not quantified at this stage, here we just briefly report on our ongoing activities aimed at validating the mechanisms of proton scattering at grazing incidence.

A Preliminary Validation Analysis of Orbiting Carbon Observatory-2 (OCO-2) Measurements Using TCCON Data

NASA Astrophysics Data System (ADS)

Osterman, G. B.; Fisher, B.; Roehl, C. M.; Wunch, D.; Wennberg, P. O.; Eldering, A.; Naylor, B. J.; Crisp, D.; Pollock, H. R.; Gunson, M. R.

2014-12-01

The NASA Orbiting Carbon Observatory-2 (OCO-2) successfully launched from Vandenberg Air Force Base in California on July 2, 2014. The OCO-2 mission is designed to provide remotely sensed measurements of the column averaged dry air mole fraction of carbon dioxide from space. OCO-2 is capable of making measurements in three observation modes: Nadir, glint and target. The standard operational mode for OCO-2 alternates between nadir and glint mode every 16 days, but target mode observations are possible by commanding the spacecraft to point to specific surface location. In this presentation we provide information on the preliminary observations and plans for OCO-2 2015. In particular, we will also provide an update on the pointing capabilities and accuracy for OCO-2. We provide updates on OCO-2 target mode including possible target mode locations. We will show calendars for the different viewing geometries and target mode possibilities.

Development and preliminary validation of the young adult alcohol consequences questionnaire.

PubMed

Read, Jennifer P; Kahler, Christopher W; Strong, David R; Colder, Craig R

2006-01-01

A substantial proportion of U.S. college students drink alcoholic beverages and report significant deleterious effects. The present study describes the development and initial validation of a measure designed to capture a broad range of alcohol-related consequences experienced by male and female college students. College students (N=340, 176 women) completed a self-report questionnaire battery consisting of information about demographic characteristics, drinking behaviors, and drinking consequences. Drinking consequences were assessed with a composite measure based on the Drinker Inventory of Consequences, the Young Adult Alcohol Problem Screening Test (YAAPST) and items developed by the researchers. To assess concurrent validity, a subset of the total sample (n=126) also completed the Rutgers Alcohol Problem Index (RAPI). Confirmatory factor analyses supported an eight-factor solution (Social-Interpersonal Consequences, Impaired Control, Self-Perception, Self-Care, Risk Behaviors, Academic/Occupational Consequences, Physical Dependence, and Blackout Drinking), with all factors loading on a single, higher-order factor. YAACQ total scores correlated with alcohol quantity and frequency, and the RAPI. Gender comparisons suggest that the YAACQ assesses constructs of interest equally well for women and men. These results offer preliminary support for this measure. Research and clinical applications include the potential to predict future problems by specific type of consequence and to offer detailed feedback about drinking consequences to students as part of a preventive intervention. As such, the YAACQ may serve as an aid in both the description of and intervention for heavy drinking in college.

Development and validation of a questionnaire to evaluate patient satisfaction with diabetes disease management.

PubMed

Paddock, L E; Veloski, J; Chatterton, M L; Gevirtz, F O; Nash, D B

2000-07-01

To develop a reliable and valid questionnaire to measure patient satisfaction with diabetes disease management programs. Questions related to structure, process, and outcomes were categorized into 14 domains defining the essential elements of diabetes disease management. Health professionals confirmed the content validity. Face validity was established by a patient focus group. The questionnaire was mailed to 711 patients with diabetes who participated in a disease management program. To reduce the number of questionnaire items, a principal components analysis was performed using a varimax rotation. The Scree test was used to select significant components. To further assess reliability and validity; Cronbach's alpha and product-moment correlations were calculated for components having > or =3 items with loadings >0.50. The validated 73-item mailed satisfaction survey had a 34.1% response rate. Principal components analysis yielded 13 components with eigenvalues > 1.0. The Scree test proposed a 6-component solution (39 items), which explained 59% of the total variation. Internal consistency reliabilities computed for the first 6 components (alpha = 0.79-0.95) were acceptable. The final questionnaire, the Diabetes Management Evaluation Tool (DMET), was designed to assess patient satisfaction with diabetes disease management programs. Although more extensive testing of the questionnaire is appropriate, preliminary reliability and validity of the DMET has been demonstrated.

Translation, Adaptation and Cross Language Validation of Tinnitus Handicap Inventory in Urdu.

PubMed

Aqeel, Muhammad; Ahmed, Ammar

2017-12-01

Tinnitus is characterized as a perception of numerous auditory sounds in absence of external stimulus. Tinnitus can have a considerable consequence on a person's quality of life, and is considered to be very complicated to quantify. The aim of this study was to investigate the reliability and validity of Urdu translation of the Tinnitus Handicap Inventory (THI) in Pakistan. It was designed to assess the presence of various auditory sounds without the external stimulus. Scale consisted of 25 items having three subscales functional, emotional, and catastrophic. The study comprised into two stages, preliminary and main studies. The results of preliminary study revealed that the overall scale had high internal consistency [alpha coefficient of Urdu version of THI (THI-U)= 0.99, alpha coefficient of English version of THI=0.98]. The overall scale had test-retest correlation over a fifteen days period of interval (0.99). Main study was performed on 110 tinnitus patients. The results of main study showed that the internal consistency and reliability of Urdu version was (α=0.93). The THI-U and its subscales demonstrated good internal consistency reliability ( α =0.81 to 0.86). High to moderate correlations were noted between tinnitus symptom ratings. A confirmatory factor analysis was used to validate the three subscales of THI-U, and high inter-correlations were found between the subscales also results revealed that a three-factor model for the THI-U was most tenable. The results displayed that the confirmatory factor analysis confirmed to validate the three subscales of THI-U. THI-U might present important information about precise facets of tinnitus distress along with diagnostic interviews in clinical practice.

Properties of a center/surround retinex. Part 2: Surround design

NASA Technical Reports Server (NTRS)

Jobson, Daniel J.; Woodell, Glenn A.

1995-01-01

The last version of Edwin Land's retinex model for human vision's lightness and color constancy has been implemented. Previous research has established the mathematical foundations of Land's retinex but has not examined specific design issues and their effects on the properties of the retinex operation. We have sought to define a practical implementation of the retinex without particular concern for its validity as a model for human lightness and color perception. Here we describe issues involved in designing the surround function. We find that there is a trade-off between rendition and dynamic range compression that is governed by the surround space constant. Various functional forms for the retinex surround are evaluated and a Gaussian form is found to perform better than the inverse square suggested by Land. Preliminary testing led to the design of a Gaussian surround with a space constant of 80 pixels as a reasonable compromise between dynamic range compression and rendition.

Preliminary psycometric assessment of the Brazilian version of the DISABKIDS Atopic Dermatitis Module.

PubMed

Deon, Keila Cristiane; Santos, Danielle Maria de Souza Sério dos; Bullinger, Monika; Santos, Claudia Benedita dos

2011-12-01

To assess preliminary psychometric properties of the Brazilian Portuguese version of a questionnaire for measuring health-related quality of life in children and adolescents with atopic dermatitis. Cross-sectional study with a sample consisting of 52 children and adolescents aged 8 to 18 diagnosed with atopic dermatitis, and their parents or caregivers, selected at the dermatology department of a university hospital in the city of São Paulo, Southeast Brazil, in 2009. Construct validity, internal consistency and agreement between the responses of children and adolescents and their parents or caregivers were assessed in the Brazilian Portuguese version of the DISABKIDS-Atopic Dermatitis Module (ADM). Adequate internal consistency was found with Cronbach's alpha coefficients of 0.7024/0.8124 and 0.7239/0.8604. The multitrait multimethod analysis for assessing convergent validity showed measures higher than 0.30 for all items. The analysis showed good discriminant validity. Agreement between child self-report and parent proxy-report was evaluated using intra-class correlation with measures impact and social stigma of disease of 0.8173 and 0.7629, respectively. The study results showed that the DISABKIDS-ADM can be used by Brazilian researchers after its complete validation as it showed adequate preliminary psychometric properties and can be considered a valid, reliable instrument.

Development of the Affordances in the Home Environment for Motor Development-Infant Scale.

PubMed

Caçola, Priscila; Gabbard, Carl; Santos, Denise C C; Batistela, Ana Carolina T

2011-12-01

The present study reports the development and application of the Affordances in the Home Environment for Motor Development-Infant Scale (AHEMD-IS), a parental self-report designed to assess the quantity and quality of affordances in the home environment that are conducive to motor development for infants aged 3-18 months. Steps in its development included use of expert feedback, establishment of construct validity, interrater and intrarater reliability, and predictive validity. With all phases of the project, 113 homes were involved. Intraclass correlation coefficients for interrater and intrarater reliability for the total score were 1 and 0.94, respectively. In addition, results indicate that the test has the characteristic of differentiating a wide range of scores. Regression analysis for the AHEMD-IS and motor development using the Alberta Infant Motor Scale supports preliminary evidence for predictive validity. Our findings suggest that the AHEMD-IS has sufficient reliability and validity as an instrument for assessing affordances in the home environment, with clinical and research applications. © 2011 The Authors. Pediatrics International © 2011 Japan Pediatric Society.

Mechanical Design of a Performance Test Rig for the Turbine Air-Flow Task (TAFT)

NASA Technical Reports Server (NTRS)

Xenofos, George; Forbes, John; Farrow, John; Williams, Robert; Tyler, Tom; Sargent, Scott; Moharos, Jozsef

2003-01-01

To support development of the Boeing-Rocketdyne RS84 rocket engine, a fill-flow, reaction turbine geometry was integrated into the NASA-MSFC turbine air-flow test facility. A mechanical design was generated which minimized the amount of new hardware while incorporating all test and instrUmentation requirements. This paper provides details of the mechanical design for this Turbine Air-Flow Task (TAFT) test rig. The mechanical design process utilized for this task included the following basic stages: Conceptual Design. Preliminary Design. Detailed Design. Baseline of Design (including Configuration Control and Drawing Revision). Fabrication. Assembly. During the design process, many lessons were learned that should benefit future test rig design projects. Of primary importance are well-defined requirements early in the design process, a thorough detailed design package, and effective communication with both the customer and the fabrication contractors. The test rig provided steady and unsteady pressure data necessary to validate the computational fluid dynamics (CFD) code. The rig also helped characterize the turbine blade loading conditions. Test and CFD analysis results are to be presented in another JANNAF paper.

CFD Validation Experiment of a Mach 2.5 Axisymmetric Shock-Wave Boundary-Layer Interaction

NASA Technical Reports Server (NTRS)

Davis, David O.

2015-01-01

Preliminary results of an experimental investigation of a Mach 2.5 two-dimensional axisymmetric shock-wave/boundary-layer interaction (SWBLI) are presented. The purpose of the investigation is to create a SWBLI dataset specifically for CFD validation purposes. Presented herein are the details of the facility and preliminary measurements characterizing the facility and interaction region. The results will serve to define the region of interest where more detailed mean and turbulence measurements will be made.

CFD Validation Experiment of a Mach 2.5 Axisymmetric Shock-Wave/Boundary-Layer Interaction

NASA Technical Reports Server (NTRS)

Davis, David Owen

2015-01-01

Preliminary results of an experimental investigation of a Mach 2.5 two-dimensional axisymmetric shock-wave/ boundary-layer interaction (SWBLI) are presented. The purpose of the investigation is to create a SWBLI dataset specifically for CFD validation purposes. Presented herein are the details of the facility and preliminary measurements characterizing the facility and interaction region. These results will serve to define the region of interest where more detailed mean and turbulence measurements will be made.

Phase 1 Validation Testing and Simulation for the WEC-Sim Open Source Code

NASA Astrophysics Data System (ADS)

Ruehl, K.; Michelen, C.; Gunawan, B.; Bosma, B.; Simmons, A.; Lomonaco, P.

2015-12-01

WEC-Sim is an open source code to model wave energy converters performance in operational waves, developed by Sandia and NREL and funded by the US DOE. The code is a time-domain modeling tool developed in MATLAB/SIMULINK using the multibody dynamics solver SimMechanics, and solves the WEC's governing equations of motion using the Cummins time-domain impulse response formulation in 6 degrees of freedom. The WEC-Sim code has undergone verification through code-to-code comparisons; however validation of the code has been limited to publicly available experimental data sets. While these data sets provide preliminary code validation, the experimental tests were not explicitly designed for code validation, and as a result are limited in their ability to validate the full functionality of the WEC-Sim code. Therefore, dedicated physical model tests for WEC-Sim validation have been performed. This presentation provides an overview of the WEC-Sim validation experimental wave tank tests performed at the Oregon State University's Directional Wave Basin at Hinsdale Wave Research Laboratory. Phase 1 of experimental testing was focused on device characterization and completed in Fall 2015. Phase 2 is focused on WEC performance and scheduled for Winter 2015/2016. These experimental tests were designed explicitly to validate the performance of WEC-Sim code, and its new feature additions. Upon completion, the WEC-Sim validation data set will be made publicly available to the wave energy community. For the physical model test, a controllable model of a floating wave energy converter has been designed and constructed. The instrumentation includes state-of-the-art devices to measure pressure fields, motions in 6 DOF, multi-axial load cells, torque transducers, position transducers, and encoders. The model also incorporates a fully programmable Power-Take-Off system which can be used to generate or absorb wave energy. Numerical simulations of the experiments using WEC-Sim will be presented. These simulations highlight the code features included in the latest release of WEC-Sim (v1.2), including: wave directionality, nonlinear hydrostatics and hydrodynamics, user-defined wave elevation time-series, state space radiation, and WEC-Sim compatibility with BEMIO (open source AQWA/WAMI/NEMOH coefficient parser).

Construction and Validation of a Women's Autonomy Measurement Scale with Reference to Utilization of Maternal Health Care Services in Nepal.

PubMed

Bhandari, T R; Dangal, G; Sarma, P S; Kutty, V R

2014-01-01

Women's autonomy is one of the predictors of maternal health care service utilization. This study aimed to construct and validate a scale for measuring women's autonomy with relevance to developing countries. We conducted a study for construction and validation of a scale in Rupandehi and further validated in Kapilvastu districts of Nepal. Initially, we administered a 24-item preliminary scale and finalized a 23-item scale using psychometric tests. After defining the construct of women's autonomy, we pooled 194 items and selected 24 items to develop a preliminary scale. The scale development process followed different steps i.e. definition of construct, generation of items pool, pretesting, analysis of psychometric test and further validation. The new scale was strongly supported by Cronbach's Alpha value (0.84), test-retest Pearson correlation (0.87), average content validity ratio (0.8) and overall agreement- Kappa value of the items (0.83) whereas all values were found satisfactory. From factor analysis, we selected 23 items for the final scale which show good convergent and discriminant validity. From preliminary draft, we removed one item; the remaining 23 items were loaded in five factors. All five factors had single loading items by suppressing absolute coefficient value less than 0.45 and average coefficient was more than 0.60 of each factor. Similarly, the factors and loaded items had good convergent and discriminant validity which further showed strong measurement capacity of the scale. The new scale is a reliable tool for assessing women's autonomy in developing countries. We recommend for further use and validation of the scale for ensuring the measurement capacity.

Hollow fiber: a biophotonic implant for live cells

NASA Astrophysics Data System (ADS)

Silvestre, Oscar F.; Holton, Mark D.; Summers, Huw D.; Smith, Paul J.; Errington, Rachel J.

2009-02-01

The technical objective of this study has been to design, build and validate biocompatible hollow fiber implants based on fluorescence with integrated biophotonics components to enable in fiber kinetic cell based assays. A human osteosarcoma in vitro cell model fiber system has been established with validation studies to determine in fiber cell growth, cell cycle analysis and organization in normal and drug treated conditions. The rationale for implant development have focused on developing benchmark concepts in standard monolayer tissue culture followed by the development of in vitro hollow fiber designs; encompassing imaging with and without integrated biophotonics. Furthermore the effect of introducing targetable biosensors into the encapsulated tumor implant such as quantum dots for informing new detection readouts and possible implant designs have been evaluated. A preliminary micro/macro imaging approach has been undertaken, that could provide a mean to track distinct morphological changes in cells growing in a 3D matrix within the fiber which affect the light scattering properties of the implant. Parallel engineering studies have showed the influence of the optical properties of the fiber polymer wall in all imaging modes. Taken all together, we show the basic foundation and the opportunities for multi-modal imaging within an in vitro implant format.

Final Report - Regulatory Considerations for Adaptive Systems

NASA Technical Reports Server (NTRS)

Wilkinson, Chris; Lynch, Jonathan; Bharadwaj, Raj

2013-01-01

This report documents the findings of a preliminary research study into new approaches to the software design assurance of adaptive systems. We suggest a methodology to overcome the software validation and verification difficulties posed by the underlying assumption of non-adaptive software in the requirementsbased- testing verification methods in RTCA/DO-178B and C. An analysis of the relevant RTCA/DO-178B and C objectives is presented showing the reasons for the difficulties that arise in showing satisfaction of the objectives and suggested additional means by which they could be satisfied. We suggest that the software design assurance problem for adaptive systems is principally one of developing correct and complete high level requirements and system level constraints that define the necessary system functional and safety properties to assure the safe use of adaptive systems. We show how analytical techniques such as model based design, mathematical modeling and formal or formal-like methods can be used to both validate the high level functional and safety requirements, establish necessary constraints and provide the verification evidence for the satisfaction of requirements and constraints that supplements conventional testing. Finally the report identifies the follow-on research topics needed to implement this methodology.

WE-A-17A-09: Exploiting Electromagnetic Technologies for Real-Time Seed Drop Position Validation in Permanent Implant Brachytherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Racine, E; Hautvast, G; Binnekamp, D

Purpose: To report on preliminary results validating the performance of a specially designed LDR brachytherapy needle prototype possessing both electromagnetic (EM) tracking and seed drop detection abilities. Methods: An EM hollow needle prototype has been designed and constructed in collaboration with research partner Philips Healthcare. The needle possesses conventional 3D tracking capabilities, along with a novel seed drop detection mechanism exploiting local changes of electromagnetic properties generated by the passage of seeds in the needle's embedded sensor coils. These two capabilities are exploited by proprietary engineering and signal processing techniques to generate seed drop position estimates in real-time treatment delivery.more » The electromagnetic tracking system (EMTS) used for the experiment is the NDI Aurora Planar Field Generator. The experiment consisted of dropping a total of 35 seeds in a prismatic agarose phantom, and comparing the 3D seed drop positions of the EMTS to those obtained by an image analysis of subsequent micro-CT scans. Drop position error computations and statistical analysis were performed after a 3D registration of the two seed distributions. Results: Of the 35 seeds dropped in the phantom, 32 were properly detected by the needle prototype. Absolute drop position errors among the detected seeds ranged from 0.5 to 4.8 mm with mean and standard deviation values of 1.6 and 0.9 mm, respectively. Error measurements also include undesirable and uncontrollable effects such as seed motion upon deposition. The true accuracy performance of the needle prototype is therefore underestimated. Conclusion: This preliminary study demonstrates the potential benefits of EM technologies in detecting the passage of seeds in a hollow needle as a means of generating drop position estimates in real-time treatment delivery. Such tools could therefore represent a potentially interesting addition to existing brachytherapy protocols for rapid dosimetry validation. Equipments and fundings for this project were provided by Philips Medical.« less

Developing the Next Generation Shell Buckling Design Factors and Technologies

NASA Technical Reports Server (NTRS)

Hilburger, Mark W.

2012-01-01

NASA s Shell Buckling Knockdown Factor (SBKF) Project was established in the spring of 2007 by the NASA Engineering and Safety Center (NESC) in collaboration with the Constellation Program and Exploration Systems Mission Directorate. The SBKF project has the current goal of developing less-conservative, robust shell buckling design factors (a.k.a. knockdown factors) and design and analysis technologies for light-weight stiffened metallic launch vehicle (LV) structures. Preliminary design studies indicate that implementation of these new knockdown factors can enable significant reductions in mass and mass-growth in these vehicles and can help mitigate some of NASA s LV development and performance risks. In particular, it is expected that the results from this project will help reduce the reliance on testing, provide high-fidelity estimates of structural performance, reliability, robustness, and enable increased payload capability. The SBKF project objectives and approach used to develop and validate new design technologies are presented, and provide a glimpse into the future of design of the next generation of buckling-critical launch vehicle structures.

Rapid design and optimization of low-thrust rendezvous/interception trajectory for asteroid deflection missions

NASA Astrophysics Data System (ADS)

Li, Shuang; Zhu, Yongsheng; Wang, Yukai

2014-02-01

Asteroid deflection techniques are essential in order to protect the Earth from catastrophic impacts by hazardous asteroids. Rapid design and optimization of low-thrust rendezvous/interception trajectories is considered as one of the key technologies to successfully deflect potentially hazardous asteroids. In this paper, we address a general framework for the rapid design and optimization of low-thrust rendezvous/interception trajectories for future asteroid deflection missions. The design and optimization process includes three closely associated steps. Firstly, shape-based approaches and genetic algorithm (GA) are adopted to perform preliminary design, which provides a reasonable initial guess for subsequent accurate optimization. Secondly, Radau pseudospectral method is utilized to transcribe the low-thrust trajectory optimization problem into a discrete nonlinear programming (NLP) problem. Finally, sequential quadratic programming (SQP) is used to efficiently solve the nonlinear programming problem and obtain the optimal low-thrust rendezvous/interception trajectories. The rapid design and optimization algorithms developed in this paper are validated by three simulation cases with different performance indexes and boundary constraints.

LAnd surface remote sensing Products VAlidation System (LAPVAS) and its preliminary application

NASA Astrophysics Data System (ADS)

Lin, Xingwen; Wen, Jianguang; Tang, Yong; Ma, Mingguo; Dou, Baocheng; Wu, Xiaodan; Meng, Lumin

2014-11-01

The long term record of remote sensing product shows the land surface parameters with spatial and temporal change to support regional and global scientific research widely. Remote sensing product with different sensors and different algorithms is necessary to be validated to ensure the high quality remote sensing product. Investigation about the remote sensing product validation shows that it is a complex processing both the quality of in-situ data requirement and method of precision assessment. A comprehensive validation should be needed with long time series and multiple land surface types. So a system named as land surface remote sensing product is designed in this paper to assess the uncertainty information of the remote sensing products based on a amount of in situ data and the validation techniques. The designed validation system platform consists of three parts: Validation databases Precision analysis subsystem, Inter-external interface of system. These three parts are built by some essential service modules, such as Data-Read service modules, Data-Insert service modules, Data-Associated service modules, Precision-Analysis service modules, Scale-Change service modules and so on. To run the validation system platform, users could order these service modules and choreograph them by the user interactive and then compete the validation tasks of remote sensing products (such as LAI ,ALBEDO ,VI etc.) . Taking SOA-based architecture as the framework of this system. The benefit of this architecture is the good service modules which could be independent of any development environment by standards such as the Web-Service Description Language(WSDL). The standard language: C++ and java will used as the primary programming language to create service modules. One of the key land surface parameter, albedo, is selected as an example of the system application. It is illustrated that the LAPVAS has a good performance to implement the land surface remote sensing product validation.

Overview of the Preliminary Design of the Optical Communication Demonstration and High-Rate Link Facility

NASA Technical Reports Server (NTRS)

Sandusky, John V.; Jeganathan, M.; Ortiz, G.; Biswas, A.; Lee, S.; Parker, G.; Liu, B.; Johnson, D.; DePew, J.; Lesh, J. R.

2000-01-01

Tlis paper presents an overview of the preliminary design of both the flight and ground systems of the Optical Communication Demonstration and High-Rate Link Facility which will demonstrate optical communication from the International Space Station to ground after its deployment in October 2002. The overview of the preliminary design of the Flight System proceeds by contrasting it with the design of the laboratory-model unit, emphasizing key changes and the rationale behind the design choices. After presenting the preliminary design of the Ground System, the timetable for the construction and deployment of the flight and ground systems is outlined.

Development Biology Worksheet Oriented Accelerated Learning on Plantae and Ecosystems for 10th-Grade Senior High School Students

NASA Astrophysics Data System (ADS)

Dipuja, D. A.; Lufri, L.; Ahda, Y.

2018-04-01

The problem that found are learning outcomes student is low on the plantae and ecosystems. Students less motivated and passive learning because learning is teacher center and teaching materials not facilitate student. Therefore, it is necessary to design a worksheet oriented accelerated learning. Accelerated learning approach that can improve motivation and learning activities. The purpose of the research was to produce worksheet oriented accelerated learning on plantae and ecosystems. This research is designed as a research and development by using Plomp model, consists of the preliminary, prototyping, and assessment phase. Data was collected through questionnaires, observation sheet, test, and documentation. The results of the research was worksheet oriented accelerated learning on plantae and ecosystems is very valid.

The Body Dysmorphic Disorder Symptom Scale: Development and preliminary validation of a self-report scale of symptom specific dysfunction.

PubMed

Wilhelm, Sabine; Greenberg, Jennifer L; Rosenfield, Elizabeth; Kasarskis, Irina; Blashill, Aaron J

2016-06-01

The Body Dysmorphic Disorder Symptom Scale (BDD-SS) is a new self-report measure used to examine the severity of a wide variety of symptoms associated with body dysmorphic disorder (BDD). The BDD-SS was designed to differentiate, for each group of symptoms, the number of symptoms endorsed and their severity. This report evaluates and compares the psychometric characteristics of the BDD-SS in relation to other measures of BDD, body image, and depression in 99 adult participants diagnosed with BDD. Total scores of the BDD-SS showed good reliability and convergent validity and moderate discriminant validity. Analyses of the individual BDD-SS symptom groups confirmed the reliability of the checking, grooming, weight/shape, and cognition groups. The current findings indicate that the BDD-SS can be quickly administered and used to examine the severity of heterogeneous BDD symptoms for research and clinical purposes. Copyright © 2016. Published by Elsevier Ltd.

Assessment of an Illness-specific Dimension of Self-esteem in Youths with Type 1 Diabetes

PubMed Central

Iannotti, Ronald J.; Nansel, Tonja R.; Haynie, Denise L.; Sobel, Douglas O.; Simons-Morton, Bruce

2009-01-01

Objective The initial validation of a brief assessment of a diabetes-specific self-esteem dimension in adolescents with type 1 diabetes. Methods Youths with type 1 diabetes (n = 87) aged 10–16 years were administered the multidimensional Self-Esteem Questionnaire (SEQ) and a newly designed assessment of diabetes-specific self-esteem (DSSE). Their parents completed parallel forms. Adherence to the diabetes regimen and glycemic control were also assessed. Results In factor analysis, DSSE items formed a distinct dimension of self-esteem in addition to the SEQ dimensions. This factor uniquely contributed to differences in youths’ global self-esteem. Significant associations with adherence and glycemic control suggested its concurrent validity. Agreement between youth- and parent-report DSSE forms supported inter-rater reliability. Conclusions The findings provide preliminary support for recognizing the importance of a DSSE dimension in adolescents’ adjustment to diabetes, and for the reliability and validity of the proposed assessment strategy. PMID:18664512

Validity of Students Worksheet Based Problem-Based Learning for 9th Grade Junior High School in living organism Inheritance and Food Biotechnology.

NASA Astrophysics Data System (ADS)

Jefriadi, J.; Ahda, Y.; Sumarmin, R.

2018-04-01

Based on preliminary research of students worksheet used by teachers has several disadvantages such as students worksheet arranged directly drove learners conduct an investigation without preceded by directing learners to a problem or provide stimulation, student's worksheet not provide a concrete imageand presentation activities on the students worksheet not refer to any one learning models curicullum recommended. To address problems Reviews these students then developed a worksheet based on problem-based learning. This is a research development that using Ploom models. The phases are preliminary research, development and assessment. The instruments used in data collection that includes pieces of observation/interviews, instrument self-evaluation, instruments validity. The results of the validation expert on student worksheets get a valid result the average value 80,1%. Validity of students worksheet based problem-based learning for 9th grade junior high school in living organism inheritance and food biotechnology get valid category.

[Development of key indicators for nurses performance evaluation and estimation of their weights for management by objectives].

PubMed

Lee, Eun Hwa; Ahn, Sung Hee

2010-02-01

This methodological research was designed to develop performance evaluation key indicators (PEKIs) for management by objectives (MBO) and to estimate their weights for hospital nurses. The PEKIs were developed by selecting preliminary indicators from a literature review, examining content validity and identifying their level of importance. Data were collected from November 14, 2007 to February 18, 2008. Data set for importance of indicators was obtained from 464 nurses and weights of PEKIs domain was from 453 nurses, who worked for at least 2 yr in one of three hospitals. Data were analyzed using X(2)-test, factor analysis, and the Analytical Hierarchy Process. Based upon Content Validity Index of .8 or above, 61 indicators were selected from the 100 preliminary indicators. Finally, 40 PEKIs were developed from the 61 indicators, and categorized into 10 domains. The highest weight of the 10 domains was customer satisfaction, which was followed by patient education, direct nursing care, profit increase, safety management, improvement of nursing quality, completeness of nursing records, enhancing competence of nurses, indirect nursing care, and cost reduction, in that order. PEKIs and their weights can be utilized for impartial evaluation and MBO for hospital nurses. Further research to verify PEKIs would lead to successful implementation of MBO.

Object-Oriented MDAO Tool with Aeroservoelastic Model Tuning Capability

NASA Technical Reports Server (NTRS)

Pak, Chan-gi; Li, Wesley; Lung, Shun-fat

2008-01-01

An object-oriented multi-disciplinary analysis and optimization (MDAO) tool has been developed at the NASA Dryden Flight Research Center to automate the design and analysis process and leverage existing commercial as well as in-house codes to enable true multidisciplinary optimization in the preliminary design stage of subsonic, transonic, supersonic and hypersonic aircraft. Once the structural analysis discipline is finalized and integrated completely into the MDAO process, other disciplines such as aerodynamics and flight controls will be integrated as well. Simple and efficient model tuning capabilities based on optimization problem are successfully integrated with the MDAO tool. More synchronized all phases of experimental testing (ground and flight), analytical model updating, high-fidelity simulations for model validation, and integrated design may result in reduction of uncertainties in the aeroservoelastic model and increase the flight safety.

Financial decision-making abilities and financial exploitation in older African Americans: Preliminary validity evidence for the Lichtenberg Financial Decision Rating Scale (LFDRS).

PubMed

Lichtenberg, Peter A; Ficker, Lisa J; Rahman-Filipiak, Annalise

2016-01-01

This study examines preliminary evidence for the Lichtenberg Financial Decision Rating Scale (LFDRS), a new person-centered approach to assessing capacity to make financial decisions, and its relationship to self-reported cases of financial exploitation in 69 older African Americans. More than one third of individuals reporting financial exploitation also had questionable decisional abilities. Overall, decisional ability score and current decision total were significantly associated with cognitive screening test and financial ability scores, demonstrating good criterion validity. Study findings suggest that impaired decisional abilities may render older adults more vulnerable to financial exploitation, and that the LFDRS is a valid tool.

Preliminary Opto-Mechanical Design for the X2000 Transceiver

NASA Technical Reports Server (NTRS)

Hemmati, H.; Page, N. A.

2000-01-01

Preliminary optical design and mechanical conceptual design for a 30 cm aperture transceiver are described. A common aperture is used for both transmit and receive. Special attention was given to off-axis and scattered light rejection and isolation of the receive channel from the transmit channel. Requirements, details of the design and preliminary performance analysis of the transceiver are provided.

Preliminary Design of Low-Thrust Interplanetary Missions

NASA Technical Reports Server (NTRS)

Sims, Jon A.; Flanagan, Steve N.

1997-01-01

For interplanetary missions, highly efficient electric propulsion systems can be used to increase the mass delivered to the destination and/or reduce the trip time over typical chemical propulsion systems. This technology is being demonstrated on the Deep Space 1 mission - part of NASA's New Millennium Program validating technologies which can lower the cost and risk and enhance the performance of future missions. With the successful demonstration on Deep Space 1, future missions can consider electric propulsion as a viable propulsion option. Electric propulsion systems, while highly efficient, produce only a small amount of thrust. As a result, the engines operate during a significant fraction of the trajectory. This characteristic makes it much more difficult to find optimal trajectories. The methods for optimizing low-thrust trajectories are typically categorized as either indirect, or direct. Indirect methods are based on calculus of variations, resulting in a two-point boundary value problem that is solved by satisfying terminal constraints and targeting conditions. These methods are subject to extreme sensitivity to the initial guess of the variables - some of which are not physically intuitive. Adding a gravity assist to the trajectory compounds the sensitivity. Direct methods parameterize the problem and use nonlinear programming techniques to optimize an objective function by adjusting a set of variables. A variety of methods of this type have been examined with varying results. These methods are subject to the limitations of the nonlinear programming techniques. In this paper we present a direct method intended to be used primarily for preliminary design of low-thrust interplanetary trajectories, including those with multiple gravity assists. Preliminary design implies a willingness to accept limited accuracy to achieve an efficient algorithm that executes quickly.

Application of decomposition techniques to the preliminary design of a transport aircraft

NASA Technical Reports Server (NTRS)

Rogan, J. E.; Mcelveen, R. P.; Kolb, M. A.

1986-01-01

A multifaceted decomposition of a nonlinear constrained optimization problem describing the preliminary design process for a transport aircraft has been made. Flight dynamics, flexible aircraft loads and deformations, and preliminary structural design subproblems appear prominently in the decomposition. The use of design process decomposition for scheduling design projects, a new system integration approach to configuration control, and the application of object-centered programming to a new generation of design tools are discussed.

An Oil-Free Thrust Foil Bearing Facility Design, Calibration, and Operation

NASA Technical Reports Server (NTRS)

Bauman, Steve

2005-01-01

New testing capabilities are needed in order to foster thrust foil air bearing technology development and aid its transition into future Oil-Free gas turbines. This paper describes a new test apparatus capable of testing thrust foil air bearings up to 100 mm in diameter at speeds to 80,000 rpm and temperatures to 650 C (1200 F). Measured parameters include bearing torque, load capacity, and bearing temperatures. This data will be used for design performance evaluations and for validation of foil bearing models. Preliminary test results demonstrate that the rig is capable of testing thrust foil air bearings under a wide range of conditions which are anticipated in future Oil-Free gas turbines. Torque as a function of speed and temperature corroborates results expected from rudimentary performance models. A number of bearings were intentionally failed with no resultant damage whatsoever to the test rig. Several test conditions (specific speeds and loads) revealed undesirable axial shaft vibrations which have been attributed to the magnetic bearing control system and are under study. Based upon these preliminary results, this test rig will be a valuable tool for thrust foil bearing research, parametric studies and technology development.

Overview of the preliminary design of the ITER plasma control system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Snipes, J. A.; Albanese, R.; Ambrosino, G.

An overview of the Preliminary Design of the ITER Plasma Control System (PCS) is described here, which focusses on the needs for 1st plasma and early plasma operation in hydrogen/helium (H/He) up to a plasma current of 15 MA with moderate auxiliary heating power in low confinement mode (L-mode). Candidate control schemes for basic magnetic control, including divertor operation and kinetic control of the electron density with gas puffing and pellet injection, were developed. Commissioning of the auxiliary heating systems is included as well as support functions for stray field topology and real-time plasma boundary reconstruction. Initial exception handling schemesmore » for faults of essential plant systems and for disruption protection were developed. The PCS architecture was also developed to be capable of handling basic control for early commissioning and the advanced control functions that will be needed for future high performance operation. A plasma control simulator is also being developed to test and validate control schemes. To handle the complexity of the ITER PCS, a systems engineering approach has been adopted with the development of a plasma control database to keep track of all control requirements.« less

Bent Laue X-ray Fluorescence Imaging of Manganese in Biological Tissues—Preliminary Results

NASA Astrophysics Data System (ADS)

Zhu, Ying; Bewer, Brian; Zhang, Honglin; Nichol, Helen; Thomlinson, Bill; Chapman, Dean

2010-06-01

Manganese (Mn) is not abundant in human brain tissue, but it is recognized as a neurotoxin. The symptoms of manganese intoxication are similar to Parkinson's disease (PD), but the link between environmental, occupational or dietary Mn exposure and PD in humans is not well established. X-ray Absorption Spectroscopy (XAS) and in particular X-ray fluorescence can provide precise information on the distribution, concentration and chemical form of metals. However the scattered radiation and fluorescence from the adjacent abundant element, iron (Fe), may interfere with and limit the ability to detect ultra-dilute Mn. A bent Laue analyzer based Mn fluorescence detection system has been designed and fabricated to improve elemental specificity in XAS imaging. This bent Laue analyzer of logarithmic spiral shape placed upstream of an energy discriminating detector should improve the energy resolution from hundreds of eV to several eV. The bent Laue detection system was validated by imaging Mn fluorescence from Mn foils, gelatin calibration samples and adult Drosophila at the Hard X-ray MicroAnalysis (HXMA) beamline at the Canadian Light Source (CLS). Optimization of the design parameters, fabrication procedures and preliminary experimental results are presented along with future plans.

Overview of the preliminary design of the ITER plasma control system

NASA Astrophysics Data System (ADS)

Snipes, J. A.; Albanese, R.; Ambrosino, G.; Ambrosino, R.; Amoskov, V.; Blanken, T. C.; Bremond, S.; Cinque, M.; de Tommasi, G.; de Vries, P. C.; Eidietis, N.; Felici, F.; Felton, R.; Ferron, J.; Formisano, A.; Gribov, Y.; Hosokawa, M.; Hyatt, A.; Humphreys, D.; Jackson, G.; Kavin, A.; Khayrutdinov, R.; Kim, D.; Kim, S. H.; Konovalov, S.; Lamzin, E.; Lehnen, M.; Lukash, V.; Lomas, P.; Mattei, M.; Mineev, A.; Moreau, P.; Neu, G.; Nouailletas, R.; Pautasso, G.; Pironti, A.; Rapson, C.; Raupp, G.; Ravensbergen, T.; Rimini, F.; Schneider, M.; Travere, J.-M.; Treutterer, W.; Villone, F.; Walker, M.; Welander, A.; Winter, A.; Zabeo, L.

2017-12-01

An overview of the preliminary design of the ITER plasma control system (PCS) is described here, which focusses on the needs for 1st plasma and early plasma operation in hydrogen/helium (H/He) up to a plasma current of 15 MA with moderate auxiliary heating power in low confinement mode (L-mode). Candidate control schemes for basic magnetic control, including divertor operation and kinetic control of the electron density with gas puffing and pellet injection, were developed. Commissioning of the auxiliary heating systems is included as well as support functions for stray field topology and real-time plasma boundary reconstruction. Initial exception handling schemes for faults of essential plant systems and for disruption protection were developed. The PCS architecture was also developed to be capable of handling basic control for early commissioning and the advanced control functions that will be needed for future high performance operation. A plasma control simulator is also being developed to test and validate control schemes. To handle the complexity of the ITER PCS, a systems engineering approach has been adopted with the development of a plasma control database to keep track of all control requirements.

Overview of the preliminary design of the ITER plasma control system

DOE PAGES

Snipes, J. A.; Albanese, R.; Ambrosino, G.; ...

2017-09-11

An overview of the Preliminary Design of the ITER Plasma Control System (PCS) is described here, which focusses on the needs for 1st plasma and early plasma operation in hydrogen/helium (H/He) up to a plasma current of 15 MA with moderate auxiliary heating power in low confinement mode (L-mode). Candidate control schemes for basic magnetic control, including divertor operation and kinetic control of the electron density with gas puffing and pellet injection, were developed. Commissioning of the auxiliary heating systems is included as well as support functions for stray field topology and real-time plasma boundary reconstruction. Initial exception handling schemesmore » for faults of essential plant systems and for disruption protection were developed. The PCS architecture was also developed to be capable of handling basic control for early commissioning and the advanced control functions that will be needed for future high performance operation. A plasma control simulator is also being developed to test and validate control schemes. To handle the complexity of the ITER PCS, a systems engineering approach has been adopted with the development of a plasma control database to keep track of all control requirements.« less

Development Status of the NASA 30-cm Ion Thruster and Power Processor

NASA Technical Reports Server (NTRS)

Sovey, James S.; Haag, Thomas W.; Hamley, John A.; Mantenieks, Maris A.; Patterson, Michael J.; Pinero, Luis R.; Rawlin, Vincent K.; Kussmaul, Michael T.; Manzella, David H.; Myers, Roger M.

1994-01-01

Xenon ion propulsion systems are being developed by NASA Lewis Research Center and the Jet Propulsion Laboratory to provide flight qualification and validation for planetary and earth-orbital missions. In the ground-test element of this program, light-weight (less than 7 kg), 30 cm diameter ion thrusters have been fabricated, and preliminary design verification tests have been conducted. At 2.3 kW, the thrust, specific impulse, and efficiency were 91 mN, 3300 s, and 0.65, respectively. An engineering model thruster is now undergoing a 2000 h wear-test. A breadboard power processor is being developed to operate from an 80 V to 120 V power bus with inverter switching frequencies of 50 kHz. The power processor design is a pathfinder and uses only three power supplies. The projected specific mass of a flight unit is about 5 kg/kW with an efficiency of 0.92 at the full-power of 2.5 kW. Preliminary integration tests of the neutralizer power supply and the ion thruster have been completed. Fabrication and test of the discharge and beam/accelerator power stages are underway.

Design, integration and preliminary results of the IXV Catalysis experiment

NASA Astrophysics Data System (ADS)

Viladegut, Alan; Panerai, F.; Chazot, O.; Pichon, T.; Bertrand, P.; Verdy, C.; Coddet, C.

2017-06-01

The CATalytic Experiment (CATE) is an in-flight demonstration of catalysis effects at the surface of thermal protection materials. A high-catalytic coating was applied over the baseline ceramic material on the windward side of the intermediate experimental vehicle (IXV). The temperature jump due to different catalytic activities was detected during re-entry through measurements made with near-surface thermocouples on the windward side of the vehicle. The experiment aimed at contributing to the development and validation of gas/surface interaction models for re-entry applications. The present paper summarizes the design of CATE and its integration on the windward side of the IXV. Results of a qualification campaign at the Plasmatron facility of the von Karman Institute for Fluid Dynamics are presented. They provided an experimental evidence of the temperature jump at the low-to-high catalytic interface of the heat shield under aerothermal conditions relevant to the actual IXV flight. These tests also gave confidence so that the high-catalytic patch would not endanger the integrity of the vehicle and the safety of the mission. A preliminary assessment of flight data from the thermocouple measurements shows consistency with results of the qualification tests.

A hydrogen-oxygen rocket engine coolant passage design program (RECOP) for fluid-cooled thrust chambers and nozzles

NASA Technical Reports Server (NTRS)

Tomsik, Thomas M.

1994-01-01

The design of coolant passages in regeneratively cooled thrust chambers is critical to the operation and safety of a rocket engine system. Designing a coolant passage is a complex thermal and hydraulic problem requiring an accurate understanding of the heat transfer between the combustion gas and the coolant. Every major rocket engine company has invested in the development of thrust chamber computer design and analysis tools; two examples are Rocketdyne's REGEN code and Aerojet's ELES program. In an effort to augment current design capabilities for government and industry, the NASA Lewis Research Center is developing a computer model to design coolant passages for advanced regeneratively cooled thrust chambers. The RECOP code incorporates state-of-the-art correlations, numerical techniques and design methods, certainly minimum requirements for generating optimum designs of future space chemical engines. A preliminary version of the RECOP model was recently completed and code validation work is in progress. This paper introduces major features of RECOP and compares the analysis to design points for the first test case engine; the Pratt & Whitney RL10A-3-3A thrust chamber.

Teaching Quality in Math Class: The Development of a Scale and the Analysis of Its Relationship with Engagement and Achievement

PubMed Central

Leon, Jaime; Medina-Garrido, Elena; Núñez, Juan L.

2017-01-01

Math achievement and engagement declines in secondary education; therefore, educators are faced with the challenge of engaging students to avoid school failure. Within self-determination theory, we address the need to assess comprehensively student perceptions of teaching quality that predict engagement and achievement. In study one we tested, in a sample of 548 high school students, a preliminary version of a scale to assess nine factors: teaching for relevance, acknowledge negative feelings, participation encouragement, controlling language, optimal challenge, focus on the process, class structure, positive feedback, and caring. In the second study, we analyzed the scale’s reliability and validity in a sample of 1555 high school students. The scale showed evidence of reliability, and with regard to criterion validity, at the classroom level, teaching quality was a predictor of behavioral engagement, and higher grades were observed in classes where students, as a whole, displayed more behavioral engagement. At the within level, behavioral engagement was associated with achievement. We not only provide a reliable and valid method to assess teaching quality, but also a method to design interventions, these could be designed based on the scale items to encourage students to persist and display more engagement on school duties, which in turn bolsters student achievement. PMID:28701964

Teaching Quality in Math Class: The Development of a Scale and the Analysis of Its Relationship with Engagement and Achievement.

PubMed

Leon, Jaime; Medina-Garrido, Elena; Núñez, Juan L

2017-01-01

Math achievement and engagement declines in secondary education; therefore, educators are faced with the challenge of engaging students to avoid school failure. Within self-determination theory, we address the need to assess comprehensively student perceptions of teaching quality that predict engagement and achievement. In study one we tested, in a sample of 548 high school students, a preliminary version of a scale to assess nine factors: teaching for relevance, acknowledge negative feelings, participation encouragement, controlling language, optimal challenge, focus on the process, class structure, positive feedback, and caring. In the second study, we analyzed the scale's reliability and validity in a sample of 1555 high school students. The scale showed evidence of reliability, and with regard to criterion validity, at the classroom level, teaching quality was a predictor of behavioral engagement, and higher grades were observed in classes where students, as a whole, displayed more behavioral engagement. At the within level, behavioral engagement was associated with achievement. We not only provide a reliable and valid method to assess teaching quality, but also a method to design interventions, these could be designed based on the scale items to encourage students to persist and display more engagement on school duties, which in turn bolsters student achievement.

Effects of an AST program on US titanium story

NASA Technical Reports Server (NTRS)

Fitzsimmons, R. D.

1980-01-01

The singular importance of titanium as the primary structural material for an efficient advanced supersonic transport (AST) is outlined. The advantages of titanium over other metals are shown to apply to future subsonic aircraft as well as for supersonic designs. The cost problem of titanium is addressed and shown to be markedly reduced by the emerging technologies of superplastic forming/diffusion bonding sandwich, hot isostatic pressing of titanium powders, and isothermal forgings if demonstration programs should validate preliminary findings. The impact of a U.S. AST program on the United States titanium supply and demand picture is postulated.

E-Nursing: electronic nursing resources on your desktop.

PubMed

Kendall, Sandra; Massaralla, Susan; Hynes-Gay, Patricia; Vincent, Leslie

2003-01-01

E-Nursing represents an innovative approach to nursing education that has the potential to support professional practice throughout the institution. This paper details the benefits, design and promotion of an electronic nursing resource collection. How to divide responsibility, cost and expertise in such a project is also discussed. Preliminary usage statistics validate E-Nursing as a point-of-care education tool for nurses at Mount Sinai Hospital. A planned approach to implementation has been an effective means of introducing E-Nursing in an institution that previously relied on traditional hard-copy resources housed in the hospital's library.

Prediction of light aircraft interior sound pressure level from the measured sound power flowing in to the cabin

NASA Technical Reports Server (NTRS)

Atwal, Mahabir S.; Heitman, Karen E.; Crocker, Malcolm J.

1986-01-01

The validity of the room equation of Crocker and Price (1982) for predicting the cabin interior sound pressure level was experimentally tested using a specially constructed setup for simultaneous measurements of transmitted sound intensity and interior sound pressure levels. Using measured values of the reverberation time and transmitted intensities, the equation was used to predict the space-averaged interior sound pressure level for three different fuselage conditions. The general agreement between the room equation and experimental test data is considered good enough for this equation to be used for preliminary design studies.

Array Detector Modules for Spent Fuel Verification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bolotnikov, Aleksey

Brookhaven National Laboratory (BNL) proposes to evaluate the arrays of position-sensitive virtual Frisch-grid (VFG) detectors for passive gamma-ray emission tomography (ET) to verify the spent fuel in storage casks before storing them in geo-repositories. Our primary objective is to conduct a preliminary analysis of the arrays capabilities and to perform field measurements to validate the effectiveness of the proposed array modules. The outcome of this proposal will consist of baseline designs for the future ET system which can ultimately be used together with neutrons detectors. This will demonstrate the usage of this technology in spent fuel storage casks.

Preliminary psychometric properties of the brief Negative Symptom Scale in youth at Clinical High-Risk for psychosis.

PubMed

Strauss, Gregory P; Chapman, Hannah C

2018-03-01

Preliminary psychometric properties of an adapted version of the Brief Negative Symptom Scale (BNSS) are reported in youth at Clinical High-Risk for psychosis (CHR). Participants included 29 CHR youth who met criteria for a prodromal syndrome on the Structured Interview for Prodromal Syndromes (SIPS). The adapted BNSS demonstrated excellent internal consistency, convergent validity, and discriminant validity, suggesting that the BNSS has utility for assessing negative symptoms in a CHR population. Copyright © 2017 Elsevier B.V. All rights reserved.

Experimental studies of characteristic combustion-driven flows for CFD validation

NASA Technical Reports Server (NTRS)

Santoro, R. J.; Moser, M.; Anderson, W.; Pal, S.; Ryan, H.; Merkle, C. L.

1992-01-01

A series of rocket-related studies intended to develop a suitable data base for validation of Computational Fluid Dynamics (CFD) models of characteristic combustion-driven flows was undertaken at the Propulsion Engineering Research Center at Penn State. Included are studies of coaxial and impinging jet injectors as well as chamber wall heat transfer effects. The objective of these studies is to provide fundamental understanding and benchmark quality data for phenomena important to rocket combustion under well-characterized conditions. Diagnostic techniques utilized in these studies emphasize determinations of velocity, temperature, spray and droplet characteristics, and combustion zone distribution. Since laser diagnostic approaches are favored, the development of an optically accessible rocket chamber has been a high priority in the initial phase of the project. During the design phase for this chamber, the advice and input of the CFD modeling community were actively sought through presentations and written surveys. Based on this procedure, a suitable uni-element rocket chamber was fabricated and is presently under preliminary testing. Results of these tests, as well as the survey findings leading to the chamber design, were presented.

An augmented reality system validation for the treatment of cockroach phobia.

PubMed

Bretón-López, Juani; Quero, Soledad; Botella, Cristina; García-Palacios, Azucena; Baños, Rosa Maria; Alcañiz, Mariano

2010-12-01

Augmented reality (AR) is a new technology in which various virtual elements are incorporated into the user's perception of the real world. The most significant aspect of AR is that the virtual elements add relevant and helpful information to the real scene. AR shares some important characteristics with virtual reality as applied in clinical psychology. However, AR offers additional features that might be crucial for treating certain problems. An AR system designed to treat insect phobia has been used for treating phobia of small animals, and positive preliminary data about the global efficacy of the system have been obtained. However, it is necessary to determine the capacity of similar AR systems and their elements that are designed to evoke anxiety in participants; this is achieved by testing the correspondence between the inclusion of feared stimuli and the induction of anxiety. The objective of the present work is to validate whether the stimuli included in the AR-Insect Phobia system are capable of inducing anxiety in six participants diagnosed with cockroach phobia. Results support the adequacy of each element of the system in inducing anxiety in all participants.

Application of decomposition techniques to the preliminary design of a transport aircraft

NASA Technical Reports Server (NTRS)

Rogan, J. E.; Kolb, M. A.

1987-01-01

A nonlinear constrained optimization problem describing the preliminary design process for a transport aircraft has been formulated. A multifaceted decomposition of the optimization problem has been made. Flight dynamics, flexible aircraft loads and deformations, and preliminary structural design subproblems appear prominently in the decomposition. The use of design process decomposition for scheduling design projects, a new system integration approach to configuration control, and the application of object-centered programming to a new generation of design tools are discussed.

Status of ITER Cryodistribution and Cryoline project

NASA Astrophysics Data System (ADS)

Sarkar, B.; Vaghela, H.; Shah, N.; Bhattacharya, R.; Choukekar, K.; Patel, P.; Kapoor, H.; Srinivasa, M.; Chang, H. S.; Badgujar, S.; Monneret, E.

2017-02-01

The system of ITER Cryodistribution (CD) and Cryolines (CLs) is an integral interface between the Cryoplant systems and the superconducting (SC) magnets as well as Cryopumps (CPs). The project has progressed from the conceptual stage to the industrial stage. The subsystems are at various stages of design as defined by the project, namely, preliminary design, final design and formal reviews. Significant progresses have been made in the prototypes studies and design validations, such as the CL and cold circulators. While one of the prototype CL is already tested, the other one is in manufacturing phase. Performance test of two cold circulators have been completed. Design requirements are unique due the complexity arising from load specifications, layout constraints, regulatory compliance, operating conditions as well as several hundred interfaces. The present status of the project in terms of technical achievements, implications of the changes and the technical management as well as the risk assessment and its mitigation including path forward towards realization is described.

Title I preliminary engineering for: A. S. E. F. solid waste to methane gas

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1976-01-01

An assignment to provide preliminary engineering of an Advanced System Experimental Facility for production of methane gas from urban solid waste by anaerobic digestion is documented. The experimental facility will be constructed on a now-existing solid waste shredding and landfill facility in Pompano Beach, Florida. Information is included on: general description of the project; justification of basic need; process design; preliminary drawings; outline specifications; preliminary estimate of cost; and time schedules for design and construction of accomplishment of design and construction. The preliminary cost estimate for the design and construction phases of the experimental program is $2,960,000, based on Dec.more » 1975 and Jan. 1976 costs. A time schedule of eight months to complete the Detailed Design, Equipment Procurement and the Award of Subcontracts is given.« less

Preliminary design of a solar central receiver for site-specific repowering application (Saguaro Power Plant). Volume II. Preliminary design. Final report, October 1982-September 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, E.R.

1983-09-01

The solar central receiver technology, site, and specific unit for repowering were selected in prior analyses and studies. The objectives of this preliminary design study were to: develop a solar central receiver repowering design for Saguaro that (1) has potential to be economically competitive with fossil fueled plants in near and long term applications, (2) has the greatest chance for completion without further government funding, (3) will further define technical and economic feasibility of a 66 MWe gross size plant that is adequate to meet the requirements for utility and industrial process heat applications, (4) can potentially be constructed andmore » operated within the next five years, and (5) incorporates solar central receiver technology and represents state-of-the-art development. This volume on the preliminary design includes the following sections: executive summary; introduction; changes from advanced conceptual design; preliminary design; system characteristics; economic analysis; and development plan.« less

BETA (Bitter Electromagnet Testing Apparatus) Design and Testing

NASA Astrophysics Data System (ADS)

Bates, Evan; Birmingham, William; Rivera, William; Romero-Talamas, Carlos

2016-10-01

BETA is a 1T water cooled Bitter-type magnetic system that has been designed and constructed at the Dusty Plasma Laboratory of the University of Maryland, Baltimore County to serve as a prototype of a scaled 10T version. Currently the system is undergoing magnetic, thermal and mechanical testing to ensure safe operating conditions and to prove analytical design optimizations. These magnets will function as experimental tools for future dusty plasma based and collaborative experiments. An overview of design methods used for building a custom made Bitter magnet with user defined experimental constraints is reviewed. The three main design methods consist of minimizing the following: ohmic power, peak conductor temperatures, and stresses induced by Lorentz forces. We will also discuss the design of BETA which includes: the magnet core, pressure vessel, cooling system, power storage bank, high powered switching system, diagnostics with safety cutoff feedback, and data acquisition (DAQ)/magnet control Matlab code. Furthermore, we present experimental data from diagnostics for validation of our analytical preliminary design methodologies and finite element analysis calculations. BETA will contribute to the knowledge necessary to finalize the 10 T magnet design.

The development and initial validation of a questionnaire to measure help-seeking behaviour in patients with new onset rheumatoid arthritis.

PubMed

Stack, Rebecca J; Mallen, Christian D; Deighton, Chris; Kiely, Patrick; Shaw, Karen L; Booth, Alison; Kumar, Kanta; Thomas, Susan; Rowan, Ian; Horne, Rob; Nightingale, Peter; Herron-Marx, Sandy; Jinks, Clare; Raza, Karim

2015-12-01

Early treatment for rheumatoid arthritis (RA) is vital. However, people often delay in seeking help at symptom onset. An assessment of the reasons behind patient delay is necessary to develop interventions to promote rapid consultation. Using a mixed methods design, we aimed to develop and test a questionnaire to assess the barriers to help seeking at RA onset. Questionnaire items were extracted from previous qualitative studies. Fifteen people with a lived experience of arthritis participated in focus groups to enhance the questionnaire's face validity. The questionnaire was also reviewed by groups of multidisciplinary health-care professionals. A test-retest survey of 41 patients with newly presenting RA or unclassified arthritis assessed the questionnaire items' intraclass correlations. During focus groups, participants rephrased questions, added questions and deleted items not relevant to the questionnaire's aims. Participants organized items into themes: early symptom experience, initial reactions to symptoms, self-management behaviours, causal beliefs, involvement of significant others, pre-diagnosis knowledge about RA, direct barriers to seeking help and relationship with GP. The test-retest survey identified seven items (out of 79) with low intraclass correlations which were removed from the final questionnaire. The involvement of people with a lived experience of arthritis and multidisciplinary health-care professionals in the preliminary validation of the DELAY (delays in evaluating arthritis early) questionnaire has enriched its development. Preliminary assessment established its reliability. The DELAY questionnaire provides a tool for researchers to evaluate individual, cultural and health service barriers to help-seeking behaviour at RA onset. © 2014 John Wiley & Sons Ltd.

The validity of the Brain Injury Cognitive Screen (BICS) as a neuropsychological screening assessment for traumatic and non-traumatic brain injury.

PubMed

Vaughan, Frances L; Neal, Jo Anne; Mulla, Farzana Nizam; Edwards, Barbara; Coetzer, Rudi

2017-04-01

The Brain Injury Cognitive Screen (BICS) was developed as an in-service cognitive assessment battery for acquired brain injury patients entering community rehabilitation. The BICS focuses on domains that are particularly compromised following TBI, and provides a broader and more detailed assessment of executive function, attention and information processing than comparable screening assessments. The BICS also includes brief assessments of perception, naming, and construction, which were predicted to be more sensitive to impairments following non-traumatic brain injury. The studies reported here examine preliminary evidence for its validity in post-acute rehabilitation. In Study 1, TBI patients completed the BICS and were compared with matched controls. Patients with focal lesions and matched controls were compared in Study 2. Study 3 examined demographic effects in a sample of normative data. TBI and focal lesion patients obtained significantly lower composite memory, executive function and attention and information processing BICS scores than healthy controls. Injury severity effects were also obtained. Logistic regression analyses indicated that each group of BICS memory, executive function and attention measures reliably differentiated TBI and focal lesion participants from controls. Design Recall, Prospective Memory, Verbal Fluency, and Visual Search test scores showed significant independent regression effects. Other subtest measures showed evidence of sensitivity to brain injury. The study provides preliminary evidence of the BICS' sensitivity to cognitive impairment caused by acquired brain injury, and its potential clinical utility as a cognitive screen. Further validation based on a revised version of the BICS and more normative data are required.

Preliminary design study for an atomospheric science facility

NASA Technical Reports Server (NTRS)

Hutchison, R.

1972-01-01

The activities and results of the Atmospheric Science Facility preliminary design study are reported. The objectives of the study were to define the scientific goals, to determine the range of experiment types, and to develop the preliminary instrument design requirements for a reusable, general purpose, optical research facility for investigating the earth's atmosphere from a space shuttle orbital vehicle.

Development of the Academic Stereotype Threat Inventory

ERIC Educational Resources Information Center

Pseekos, A. Chantelle; Dahlen, Eric R.; Levy, Jacob J.

2008-01-01

The authors describe the development and preliminary validation of the Academic Stereotype Threat Inventory, a self-report measurement of math-related stereotype threat among women. A preliminary version of the instrument was administered to 308 undergraduate women. Principal component analysis yielded a 3-factor solution. Convergent and…

Evaluation of nonmetallic thermal protection materials for the manned space shuttle. Volume 1, task 1: Assessment of technical risks associated with utilization of nonmetallic thermal protection system

NASA Technical Reports Server (NTRS)

Wilkinson, W. H.; Kirkhart, F. P.; Kistler, C. W.; Duckworth, W. H.; Ungar, E. W.; Foster, E. L.

1970-01-01

Technical problems of design and flight qualification of the proposed classes of surface insulation materials and leading edge materials were reviewed. A screening test plan, a preliminary design data test plan and a design data test plan were outlined. This program defined the apparent critical differences between the surface insulators and the leading edge materials, structuring specialized screening test plans for each of these two classes of materials. Unique testing techniques were shown to be important in evaluating the structural interaction aspects of the surface insulators and a separate task was defined to validate the test plan. In addition, a compilation was made of available information on proposed material (including metallic TPS), previous shuttle programs, pertinent test procedures, and other national programs of merit. This material was collected and summarized in an informally structured workbook.

An aerodynamic design and numerical investigation of transonic centrifugal compressor stage

NASA Astrophysics Data System (ADS)

Yi, Weilin; Ji, Lucheng; Tian, Yong; Shao, Weiwei; Li, Weiwei; Xiao, Yunhan

2011-09-01

In the present paper, the design of a transonic centrifugal compressor stage with the inlet relative Mach number about 1.3 and detailed flow field investigation by three-dimensional CFD are described. Firstly the CFD program was validated by an experimental case. Then the preliminary aerodynamic design of stage completed through in-house one-dimensional code. Three types of impellers and two sets of stages were computed and analyzed. It can be found that the swept shape of leading edge has prominent influence on the performance and can enlarge the flow range. Similarly, the performance of the stage with swept impeller is better than others. The total pressure ratio and adiabatic efficiency of final geometry achieve 7:1 and 80% respectively. The vane diffuser with same airfoils along span increases attack angle at higher span, and the local flow structure and performance is deteriorated.

Computational Analysis of Dynamic SPK(S8)-JP8 Fueled Combustor-Sector Performance

NASA Technical Reports Server (NTRS)

Ryder, R.; Hendricks, Roberts C.; Huber, M. L.; Shouse, D. T.

2010-01-01

Civil and military flight tests using blends of synthetic and biomass fueling with jet fuel up to 50:50 are currently considered as "drop-in" fuels. They are fully compatible with aircraft performance, emissions and fueling systems, yet the design and operations of such fueling systems and combustors must be capable of running fuels from a range of feedstock sources. This paper provides Smart Combustor or Fuel Flexible Combustor designers with computational tools, preliminary performance, emissions and particulates combustor sector data. The baseline fuel is kerosene-JP-8+100 (military) or Jet A (civil). Results for synthetic paraffinic kerosene (SPK) fuel blends show little change with respect to baseline performance, yet do show lower emissions. The evolution of a validated combustor design procedure is fundamental to the development of dynamic fueling of combustor systems for gas turbine engines that comply with multiple feedstock sources satisfying both new and legacy systems.

American College of Rheumatology provisional criteria for defining clinical inactive disease in select categories of juvenile idiopathic arthritis.

PubMed

Wallace, Carol A; Giannini, Edward H; Huang, Bin; Itert, Lukasz; Ruperto, Nicolino

2011-07-01

To prospectively validate the preliminary criteria for clinical inactive disease (CID) in patients with select categories of juvenile idiopathic arthritis (JIA). We used the process for development of classification and response criteria recommended by the American College of Rheumatology Quality of Care Committee. Patient-visit profiles were extracted from the phase III randomized controlled trial of infliximab in polyarticular-course JIA (i.e., patients considered to resemble those with select categories of JIA) and sent to an international group of expert physician raters. Using the physician ratings as the gold standard, the sensitivity and specificity were calculated using the preliminary criteria. Modifications to the criteria were made, and these were sent to a larger group of pediatric rheumatologists to determine quantitative, face, and content validity. Variables weighted heaviest by physicians when making their judgment were the number of joints with active arthritis, erythrocyte sedimentation rate (ESR), physician's global assessment, and duration of morning stiffness. Three modifications were made: the definition of uveitis, the definition of abnormal ESR, and the addition of morning stiffness. These changes did not alter the accuracy of the preliminary set. The modified criteria, termed the "criteria for CID in select categories of JIA," have excellent feasibility and face, content, criterion, and discriminant validity to detect CID in select categories of JIA. The small changes made to the preliminary criteria set did not alter the area under the receiver operating characteristic curve (0.954) or accuracy (91%), but have increased face and content validity. Copyright © 2011 by the American College of Rheumatology.

Validation of problem drinking screening instruments for DWI offenders

DOT National Transportation Integrated Search

1999-05-01

This document summarizes the results of a validation study for five adult screening instruments in use for preliminary screening of driving while intoxicated (DWI) offenders for problem drinking. The instruments were the Driver Risk Inventory (DRI), ...

Development and initial validation of an instrument to assess stressors among South African sports coaches.

PubMed

Kubayi, Alliance; Toriola, Abel; Didymus, Faye

2018-06-01

The aim of this series of studies was to develop and initially validate an instrument to assess stressors among South African sports coaches. In study one, a preliminary pool of 45 items was developed based on existing literature and an expert panel was employed to assess the content validity and applicability of these items. In study two, the 32 items that were retained after study one were analysed using principal component analysis (PCA). The resultant factorial structure comprised four components: environmental stressors, performance stressors, task-related stressors, and athlete stressors. These four components were made up of 26 items and, together, the components and items comprised the provisional Stressors in Sports Coaching Questionnaire (SSCQ). The results show that the SSCQ demonstrates acceptable internal consistency (.73-.89). The findings provide preliminary evidence that SSCQ is a valid tool to assess stressors among South African sports coaches.

The HealthNuts population-based study of paediatric food allergy: validity, safety and acceptability.

PubMed

Osborne, N J; Koplin, J J; Martin, P E; Gurrin, L C; Thiele, L; Tang, M L; Ponsonby, A-L; Dharmage, S C; Allen, K J

2010-10-01

The incidence of hospital admissions for food allergy-related anaphylaxis in Australia has increased, in line with world-wide trends. However, a valid measure of food allergy prevalence and risk factor data from a population-based study is still lacking. To describe the study design and methods used to recruit infants from a population for skin prick testing and oral food challenges, and the use of preliminary data to investigate the extent to which the study sample is representative of the target population. The study sampling frame design comprises 12-month-old infants presenting for routine scheduled vaccination at immunization clinics in Melbourne, Australia. We compared demographic features of participating families to population summary statistics from the Victorian Perinatal census database, and administered a survey to those non-responders who chose not to participate in the study. Study design proved acceptable to the community with good uptake (response rate 73.4%), with 2171 participants recruited. Demographic information on the study population mirrored the Victorian population with most the population parameters measured falling within our confidence intervals (CI). Use of a non-responder questionnaire revealed that a higher proportion of infants who declined to participate (non-responders) were already eating and tolerating peanuts, than those agreeing to participate (54.4%; 95% CI 50.8, 58.0 vs. 27.4%; 95% CI 25.5, 29.3 among participants). A high proportion of individuals approached in a community setting participated in a food allergy study. The study population differed from the eligible sample in relation to family history of allergy and prior consumption and peanut tolerance, providing some insights into the internal validity of the sample. The study exhibited external validity on general demographics to all births in Victoria. © 2010 Blackwell Publishing Ltd.

Development of an instrument to measure organisational culture in community pharmacies in Great Britain.

PubMed

Marques, Iuri; Willis, Sarah Caroline; Schafheutle, Ellen Ingrid; Hassell, Karen

2018-04-09

Purpose Organisational culture (OC) shapes individuals' perceptions and experiences of work. However, no instrument capable of measuring specific aspects of OC in community pharmacy exists. The purpose of this paper is to report the development and validation of an instrument to measure OC in community pharmacy in Great Britain (GB), and conduct a preliminary analysis of data collected using it. Design/methodology/approach Instrument development comprised three stages: Stage I: 12 qualitative interviews and relevant literature informed instrument design; Stage II: 30 cognitive interviews assessed content validity; and Stage III: a cross-sectional survey mailed to 1,000 community pharmacists in GB, with factor analysis for instrument validation. Statistical analysis investigated how community pharmacists perceived OC in their place of work. Findings Factor analysis produced an instrument containing 60 items across five OC dimensions - business and work configuration, social relationships, personal and professional development, skills utilisation, and environment and structures. Internal reliability for the dimensions was high (0.84 to 0.95); item-total correlations were adequate ( r=0.46 to r=0.76). Based on 209 responses, analysis suggests different OCs in community pharmacy, with some community pharmacists viewing the environment in which they worked as having a higher frequency of aspects related to patient contact and safety than others. Since these aspects are important for providing high healthcare standards, it is likely that differences in OC may be linked to different healthcare outcomes. Originality/value This newly developed and validated instrument to measure OC in community pharmacy can be used to benchmark existing OC across different pharmacies and design interventions for triggering change to improve outcomes for community pharmacists and patients.

Finite element based N-Port model for preliminary design of multibody systems

NASA Astrophysics Data System (ADS)

Sanfedino, Francesco; Alazard, Daniel; Pommier-Budinger, Valérie; Falcoz, Alexandre; Boquet, Fabrice

2018-02-01

This article presents and validates a general framework to build a linear dynamic Finite Element-based model of large flexible structures for integrated Control/Structure design. An extension of the Two-Input Two-Output Port (TITOP) approach is here developed. The authors had already proposed such framework for simple beam-like structures: each beam was considered as a TITOP sub-system that could be interconnected to another beam thanks to the ports. The present work studies bodies with multiple attaching points by allowing complex interconnections among several sub-structures in tree-like assembly. The TITOP approach is extended to generate NINOP (N-Input N-Output Port) models. A Matlab toolbox is developed integrating beam and bending plate elements. In particular a NINOP formulation of bending plates is proposed to solve analytic two-dimensional problems. The computation of NINOP models using the outputs of a MSC/Nastran modal analysis is also investigated in order to directly use the results provided by a commercial finite element software. The main advantage of this tool is to provide a model of a multibody system under the form of a block diagram with a minimal number of states. This model is easy to operate for preliminary design and control. An illustrative example highlights the potential of the proposed approach: the synthesis of the dynamical model of a spacecraft with two deployable and flexible solar arrays.

An RL10A-3-3A rocket engine model using the rocket engine transient simulator (ROCETS) software

NASA Technical Reports Server (NTRS)

Binder, Michael

1993-01-01

Steady-state and transient computer models of the RL10A-3-3A rocket engine have been created using the Rocket Engine Transient Simulation (ROCETS) code. These models were created for several purposes. The RL10 engine is a critical component of past, present, and future space missions; the model will give NASA an in-house capability to simulate the performance of the engine under various operating conditions and mission profiles. The RL10 simulation activity is also an opportunity to further validate the ROCETS program. The ROCETS code is an important tool for modeling rocket engine systems at NASA Lewis. ROCETS provides a modular and general framework for simulating the steady-state and transient behavior of any desired propulsion system. Although the ROCETS code is being used in a number of different analysis and design projects within NASA, it has not been extensively validated for any system using actual test data. The RL10A-3-3A has a ten year history of test and flight applications; it should provide sufficient data to validate the ROCETS program capability. The ROCETS models of the RL10 system were created using design information provided by Pratt & Whitney, the engine manufacturer. These models are in the process of being validated using test-stand and flight data. This paper includes a brief description of the models and comparison of preliminary simulation output against flight and test-stand data.

A Preliminary Discriminant and Convergent Validity Study of the Teacher Functional Behavioral Assessment Checklist.

ERIC Educational Resources Information Center

Stage, Scott A.; Cheney, Douglas; Walker, Bridget; LaRocque, Michelle

2002-01-01

Examines discriminant and convergent validity of the Teacher Functional Behavior Assessment Checklist (TFBAC) using 89 first- through third-grade students. Results are discussed in terms of increasing the convergent validity of the TFBAC, teacher training in concepts about functional behavioral assessment and the possibility of concurrent…

Development and Validation of Diagnostic Economics Test for Secondary Schools

ERIC Educational Resources Information Center

Eleje, Lydia I.; Esomonu, Nkechi P. M.; Agu, Ngozi N.; Okoye, Romy O.; Obasi, Emma; Onah, Frederick E.

2016-01-01

A diagnostic test in economics to aid the teachers determine student's specific weak content areas was developed and validated. Five research questions guided the study. Preliminary validation was done by two experienced teachers in the content area of secondary economics and two experts in test construction. The pilot testing was conducted for…

RE-1000 free-piston Stirling engine update

NASA Technical Reports Server (NTRS)

Schreiber, J. G.

1985-01-01

A free piston Stirling engine was tested. The tests performed over the past several years on the single cylinder engine were designed to investigate the dynamics of a free piston Stirling engine. The data are intended to be used primarily for computer code validation. The tests designed to investigate the sensitivity of the engine performance to variations in working space pressure, heater and cooler temperatures, regenerator porosity, power piston mass and displacer dynamics were completed. In addition, some data were recorded with alternate working fluids. A novel resonant balance system for the engine was also tested. Some preliminary test results of the tests performed are presented along with an outline of future tests to be run with the engine coupled to a hydraulic output unit. A description of the hydraulic output unit is given.

Validation of engineering methods for predicting hypersonic vehicle controls forces and moments

NASA Technical Reports Server (NTRS)

Maughmer, M.; Straussfogel, D.; Long, L.; Ozoroski, L.

1991-01-01

This work examines the ability of the aerodynamic analysis methods contained in an industry standard conceptual design code, the Aerodynamic Preliminary Analysis System (APAS II), to estimate the forces and moments generated through control surface deflections from low subsonic to high hypersonic speeds. Predicted control forces and moments generated by various control effectors are compared with previously published wind-tunnel and flight-test data for three vehicles: the North American X-15, a hypersonic research airplane concept, and the Space Shuttle Orbiter. Qualitative summaries of the results are given for each force and moment coefficient and each control derivative in the various speed ranges. Results show that all predictions of longitudinal stability and control derivatives are acceptable for use at the conceptual design stage.

Agile development approach for the observatory control software of the DAG 4m telescope

NASA Astrophysics Data System (ADS)

Güçsav, B. Bülent; ćoker, Deniz; Yeşilyaprak, Cahit; Keskin, Onur; Zago, Lorenzo; Yerli, Sinan K.

2016-08-01

Observatory Control Software for the upcoming 4m infrared telescope of DAG (Eastern Anatolian Observatory in Turkish) is in the beginning of its lifecycle. After the process of elicitation-validation of the initial requirements, we have been focused on preparation of a rapid conceptual design not only to see the big picture of the system but also to clarify the further development methodology. The existing preliminary designs for both software (including TCS and active optics control system) and hardware shall be presented here in brief to exploit the challenges the DAG software team has been facing with. The potential benefits of an agile approach for the development will be discussed depending on the published experience of the community and on the resources available to us.

Implementation of Quality by Design for Formulation of Rebamipide Gastro-retentive Tablet.

PubMed

Ha, Jung-Myung; Seo, Jeong-Woong; Kim, Su-Hyeon; Kim, Ju-Young; Park, Chun-Woong; Rhee, Yun-Seok; Park, Eun-Seok

2017-11-01

The purpose of the present study was to develop a rebamipide (RBM) gastro-retentive (GR) tablet by implementing quality by design (QbD). RBM GR tablets were prepared using a sublimation method. Quality target product profile (QTPP) and critical quality attributes (CQAs) of the RBM GR tablets were defined according to the preliminary studies. Factors affecting the CQAs were prioritized using failure mode and effects analysis (FMEA). Design space and optimum formulation were established through a mixture design. The validity of the design space was confirmed using runs within the area. The QTPP of the RBM GR tablets was the orally administered GR tablet containing 300 mg of RBM taken once daily. Based on the QTPP, dissolution rate, tablet friability, and floating property were chosen as CQAs. According to the risk assessment, the amount of sustained-release agent, sublimating material, and diluent showed high-risk priority number (RPN) values above 40. Based on the RPN, these factors were further investigated using mixture design methodology. Design space of formulations was depicted as an overlaid contour plot and the optimum formulation to satisfy the desired responses was obtained by determining the expected value of each response. The similarity factor (f2) of the release profile between predicted response and experimental response was 89.463, suggesting that two release profiles are similar. The validity of the design space was also confirmed. Consequently, we were able to develop the RBM GR tablets by implementing the QbD concept. These results provide useful information for development of tablet formulations using the QbD.

Development and psychometric testing of the Canine Owner-Reported Quality of Life questionnaire, an instrument designed to measure quality of life in dogs with cancer.

PubMed

Giuffrida, Michelle A; Brown, Dorothy Cimino; Ellenberg, Susan S; Farrar, John T

2018-05-01

OBJECTIVE To describe development and initial psychometric testing of an owner-reported questionnaire designed to standardize measurement of general quality of life (QOL) in dogs with cancer. DESIGN Key-informant interviews, questionnaire development, and field trial. SAMPLE Owners of 25 dogs with cancer for item development and pretesting and owners of 90 dogs with cancer for reliability and validity testing. PROCEDURES Standard methods for development and testing of questionnaire instruments intended to measure subjective states were used. Items were generated, selected, scaled, and pretested for content, meaning, and readability. Response items were evaluated with exploratory factor analysis and by assessing internal consistency (Cronbach α) and convergence with global QOL as determined with a visual analog scale. Preliminary tests of stability and responsiveness were performed. RESULTS The final questionnaire-which was named the Canine Owner-Reported Quality of Life (CORQ) questionnaire-contained 17 items related to observable behaviors commonly used by owners to evaluate QOL in their dogs. Several items pertaining to physical symptoms performed poorly and were omitted. The 17 items were assigned to 4 factors-vitality, companionship, pain, and mobility-on the basis of the items they contained. The CORQ questionnaire and its factors had high internal consistency (Cronbach α = 0.68 to 0.90) and moderate to strong correlations (r = 0.49 to 0.71) with global QOL as measured on a visual analog scale. Preliminary testing indicated good test-retest reliability and responsiveness to improvements in overall QOL. CONCLUSIONS AND CLINICAL RELEVANCE The CORQ questionnaire was a valid, reliable owner-reported questionnaire that measured general QOL in dogs with cancer and showed promise as a clinical trial outcome measure for quantifying changes in individual dog QOL occurring in response to cancer treatment and progression.

Hierarchical modeling and robust synthesis for the preliminary design of large scale complex systems

NASA Astrophysics Data System (ADS)

Koch, Patrick Nathan

Large-scale complex systems are characterized by multiple interacting subsystems and the analysis of multiple disciplines. The design and development of such systems inevitably requires the resolution of multiple conflicting objectives. The size of complex systems, however, prohibits the development of comprehensive system models, and thus these systems must be partitioned into their constituent parts. Because simultaneous solution of individual subsystem models is often not manageable iteration is inevitable and often excessive. In this dissertation these issues are addressed through the development of a method for hierarchical robust preliminary design exploration to facilitate concurrent system and subsystem design exploration, for the concurrent generation of robust system and subsystem specifications for the preliminary design of multi-level, multi-objective, large-scale complex systems. This method is developed through the integration and expansion of current design techniques: (1) Hierarchical partitioning and modeling techniques for partitioning large-scale complex systems into more tractable parts, and allowing integration of subproblems for system synthesis, (2) Statistical experimentation and approximation techniques for increasing both the efficiency and the comprehensiveness of preliminary design exploration, and (3) Noise modeling techniques for implementing robust preliminary design when approximate models are employed. The method developed and associated approaches are illustrated through their application to the preliminary design of a commercial turbofan turbine propulsion system; the turbofan system-level problem is partitioned into engine cycle and configuration design and a compressor module is integrated for more detailed subsystem-level design exploration, improving system evaluation.

Application of Pi Preform Composite Joints in Fabrication of NASA Composite Crew Module Demonstration Structure

NASA Technical Reports Server (NTRS)

Higgins, John E.; Pelham, Larry

2008-01-01

This paper will describe unique and extensive use of pre-woven and impregnated pi cross-sections in fabrication of a carbon composite demonstration structure for the Composite Crew Module (CCM) Program. The program is managed by the NASA Safety and Engineering Center with participants from ten NASA Centers and AFRL. Multiple aerospace contractors are participating in the design development, tooling and fabrication effort as well. The goal of the program is to develop an agency wide design team for composite habitable spacecraft. The specific goals for this development project are: a) To gain hands on experience in design, building and testing a composite crew module. b) To validate key assumptions by resolving composite spacecraft design details through fabrication and testing of hardware. This paper will focus on the design and fabrication issues supporting selection of the Lockheed Martin patented Pi pre-form to provide sound composite joints a numerous locations in the structure. This abstract is based on Preliminary Design data. The final design will continue to evolve through the fall of 2007 with fabrication mostly completed by conference date.

Orbital transfer rocket engine technology 7.5K-LB thrust rocket engine preliminary design

NASA Technical Reports Server (NTRS)

Harmon, T. J.; Roschak, E.

1993-01-01

A preliminary design of an advanced LOX/LH2 expander cycle rocket engine producing 7,500 lbf thrust for Orbital Transfer vehicle missions was completed. Engine system, component and turbomachinery analysis at both on design and off design conditions were completed. The preliminary design analysis results showed engine requirements and performance goals were met. Computer models are described and model outputs are presented. Engine system assembly layouts, component layouts and valve and control system analysis are presented. Major design technologies were identified and remaining issues and concerns were listed.

Preliminary design studies of an advanced general aviation aircraft

NASA Technical Reports Server (NTRS)

Barrett, Ron; Demoss, Shane; Dirkzwager, AB; Evans, Darryl; Gomer, Charles; Keiter, Jerry; Knipp, Darren; Seier, Glen; Smith, Steve; Wenninger, ED

1991-01-01

The preliminary design results are presented of the advanced aircraft design project. The goal was to take a revolutionary look into the design of a general aviation aircraft. Phase 1 of the project included the preliminary design of two configurations, a pusher, and a tractor. Phase 2 included the selection of only one configuration for further study. The pusher configuration was selected on the basis of performance characteristics, cabin noise, natural laminar flow, and system layouts. The design was then iterated to achieve higher levels of performance.

Preliminary design package for solar heating and hot water system

NASA Technical Reports Server (NTRS)

1976-01-01

Two prototype solar heating and hot water systems for use in single-family dwellings or commercial buildings were designed. Subsystems included are: collector, storage, transport, hot water, auxiliary energy, and government-furnished site data acquisition. The systems are designed for Yosemite, California, and Pueblo, Colorado. The necessary information to evaluate the preliminary design for these solar heating and hot water systems is presented. Included are a proposed instrumentation plan, a training program, hazard analysis, preliminary design drawings, and other information about the design of the system.

2017 publication guidelines for structural modelling of small-angle scattering data from biomolecules in solution: an update

PubMed Central

Duff, Anthony P.; Durand, Dominique; Gabel, Frank; Hendrickson, Wayne A.; Hura, Greg L.; Jacques, David A.; Kirby, Nigel M.; Kwan, Ann H.; Pérez, Javier; Pollack, Lois; Ryan, Timothy M.; Sali, Andrej; Schneidman-Duhovny, Dina; Vachette, Patrice; Westbrook, John

2017-01-01

In 2012, preliminary guidelines were published addressing sample quality, data acquisition and reduction, presentation of scattering data and validation, and modelling for biomolecular small-angle scattering (SAS) experiments. Bio­molecular SAS has since continued to grow and authors have increasingly adopted the preliminary guidelines. In parallel, integrative/hybrid determination of biomolecular structures is a rapidly growing field that is expanding the scope of structural biology. For SAS to contribute maximally to this field, it is essential to ensure open access to the information required for evaluation of the quality of SAS samples and data, as well as the validity of SAS-based structural models. To this end, the preliminary guidelines for data presentation in a publication are reviewed and updated, and the deposition of data and associated models in a public archive is recommended. These guidelines and recommendations have been prepared in consultation with the members of the International Union of Crystallography (IUCr) Small-Angle Scattering and Journals Commissions, the Worldwide Protein Data Bank (wwPDB) Small-Angle Scattering Validation Task Force and additional experts in the field. PMID:28876235

Validation of CALIPSO Lidar Observations Using Data From the NASA Langley Airborne High Spectral Resolution Lidar

NASA Technical Reports Server (NTRS)

Hostetler, Chris; Hair, Johnathan; Liu, Zhaoyan; Ferrare, Rich; Harper, David; Cook, Anthony; Vaughan, Mark; Trepte, Chip; Winker, David

2006-01-01

This poster focuses on preliminary comparisons of data from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument on the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) spacecraft with data acquired by the NASA Langley Airborne High Spectral Resolution Lidar (HSRL). A series of 20 aircraft validation flights was conducted from 14 June through 27 September 2006, under both day and night lighting conditions and a variety of aerosol and cloud conditions. This poster presents comparisons of CALIOP measurements of attenuated backscatter at 532 and 1064 nm and depolarization at 532 nm with near coincident measurements from the Airborne HSRL as a preliminary assessment of CALIOP calibration accuracy. Note that the CALIOP data presented here are the pre-release version. These data have known artifacts in calibration which have been corrected in the December 8 CALIPSO data release which was not available at the time the comparisons were conducted for this poster. The HSRL data are also preliminary. No artifacts are known to exist; however, refinements in calibration and algorithms are likely to be implemented before validation comparisons are made final.

Concept design theory and model for multi-use space facilities: Analysis of key system design parameters through variance of mission requirements

NASA Astrophysics Data System (ADS)

Reynerson, Charles Martin

This research has been performed to create concept design and economic feasibility data for space business parks. A space business park is a commercially run multi-use space station facility designed for use by a wide variety of customers. Both space hardware and crew are considered as revenue producing payloads. Examples of commercial markets may include biological and materials research, processing, and production, space tourism habitats, and satellite maintenance and resupply depots. This research develops a design methodology and an analytical tool to create feasible preliminary design information for space business parks. The design tool is validated against a number of real facility designs. Appropriate model variables are adjusted to ensure that statistical approximations are valid for subsequent analyses. The tool is used to analyze the effect of various payload requirements on the size, weight and power of the facility. The approach for the analytical tool was to input potential payloads as simple requirements, such as volume, weight, power, crew size, and endurance. In creating the theory, basic principles are used and combined with parametric estimation of data when necessary. Key system parameters are identified for overall system design. Typical ranges for these key parameters are identified based on real human spaceflight systems. To connect the economics to design, a life-cycle cost model is created based upon facility mass. This rough cost model estimates potential return on investments, initial investment requirements and number of years to return on the initial investment. Example cases are analyzed for both performance and cost driven requirements for space hotels, microgravity processing facilities, and multi-use facilities. In combining both engineering and economic models, a design-to-cost methodology is created for more accurately estimating the commercial viability for multiple space business park markets.

Factors affecting knowledge transfer from continuing professional education to clinical practice: Development and psychometric properties of a new instrument.

PubMed

Vasli, Parvaneh; Dehghan-Nayeri, Nahid; Khosravi, Laleh

2018-01-01

Despite the emphasis placed on the implementation of continuing professional education programs in Iran, researchers or practitioners have not developed an instrument for assessing the factors that affect the knowledge transfer from such programs to clinical practice. The aim of this study was to design and validate such instrument for the Iranian context. The research used a three-stage mix method. In the first stage, in-depth interviews with nurses and content analysis were conducted, after which themes were extracted from the data. In the second stage, the findings of the content analysis and literature review were examined, and preliminary instrument options were developed. In the third stage, qualitative content validity, face validity, content validity ratio, content validity index, and construct validity using exploratory factor analysis was conducted. The reliability of the instrument was measured before and after the determination of construct validity. Primary tool instrument initially comprised 53 items, and its content validity index was 0.86. In the multi-stage factor analysis, eight questions were excluded, thereby reducing 11 factors to five and finally, to four. The final instrument with 43 items consists of the following dimensions: structure and organizational climate, personal characteristics, nature and status of professionals, and nature of educational programs. Managers can use the Iranian instrument to identify factors affecting knowledge transfer of continuing professional education to clinical practice. Copyright © 2017. Published by Elsevier Ltd.

Study on the Preliminary Design of ARGO-M Operation System

NASA Astrophysics Data System (ADS)

Seo, Yoon-Kyung; Lim, Hyung-Chul; Rew, Dong-Young; Jo, Jung Hyun; Park, Jong-Uk; Park, Eun-Seo; Park, Jang-Hyun

2010-12-01

Korea Astronomy and Space Science Institute has been developing one mobile satellite laser ranging system named as accurate ranging system for geodetic observation-mobile (ARGO-M). Preliminary design of ARGO-M operation system (AOS) which is one of the ARGO-M subsystems was completed in 2009. Preliminary design results are applied to the following development phase by performing detailed design with analysis of pre-defined requirements and analysis of the derived specifications. This paper addresses the preliminary design of the whole AOS. The design results in operation and control part which is a key part in the operation system are described in detail. Analysis results of the interface between operation-supporting hardware and the control computer are summarized, which is necessary in defining the requirements for the operation-supporting hardware. Results of this study are expected to be used in the critical design phase to finalize the design process.

Development and validation of EMP-3: an instrument to measure physician's attitudes toward ethnic minority patients.

PubMed

De Maesschalck, Stephanie; Willems, Sara; De Maeseneer, Jan; Deveugele, Myriam

2010-04-01

The growing diversity of patient populations challenges health care providers. Physicians' attitudes and perceptions toward cultural diversity in health care could be partly contributing to difficulties in communication between physicians and ethnic minority patients. To evaluate these attitudes and perceptions, an instrument was developed and validated. A preliminary version of the instrument was developed through literature research and expert consultation and completed by 112 family physicians. Factor analysis was performed and reliability and construct validity tested. The instrument revealed three factors that were interpreted as: (1) physicians' task perception and ideas on cultural differences in health and health care, (2) physicians' attitudes toward physician-patient communication with minority patients, and (3) physicians' perception of minority patients' needs in communication. Moderate but significant correlations were found between factors of the EMP-3 and practice organization, practice location, and physicians' gender. Several factors of the Jefferson Empathy Scale, the Patient Practitioner Orientation Scale, and the Health Beliefs and Attitude Scale related to the first two factors of the EMP-3. This instrument, designed specifically to measure physicians' attitudes toward cultural diversity, showed moderate validity and reliability results. Further adaptations and evaluation could be useful.

Smart Aquarium as Physics Learning Media for Renewable Energy

NASA Astrophysics Data System (ADS)

Desnita, D.; Raihanati, R.; Susanti, D.

2018-04-01

Smart aquarium has been developed as a learning media to visualize Micro Hydro Power Generator (MHPG). Its used aquarium water circulation system and Wind Power Generation (WPG) which generated through a wheel as a source. Its also used to teach about energy changes, circular motion and wheel connection, electromagnetic impact, and AC power circuit. The output power and system efficiency was adjusted through the adjustment of water level and wind speed. Specific targets in this research are: to achieved: (i) develop green aquarium technology that’s suitable to used as a medium of physics learning, (ii) improving quality of process and learning result at a senior high school student. Research method used development research by Borg and Gall, which includes preliminary studies, design, product development, expert validation, and product feasibility test, and vinalisation. The validation test by the expert states that props feasible to use. Limited trials conducted prove that this tool can improve students science process skills.

Preliminary Report on Oak Ridge National Laboratory Testing of Drake/ACSS/MA2/E3X

DOE Office of Scientific and Technical Information (OSTI.GOV)

Irminger, Philip; King, Daniel J.; Herron, Andrew N.

2016-01-01

A key to industry acceptance of a new technology is extensive validation in field trials. The Powerline Conductor Accelerated Test facility (PCAT) at Oak Ridge National Laboratory (ORNL) is specifically designed to evaluate the performance and reliability of a new conductor technology under real world conditions. The facility is set up to capture large amounts of data during testing. General Cable used the ORNL PCAT facility to validate the performance of TransPowr with E3X Technology a standard overhead conductor with an inorganic high emissivity, low absorptivity surface coating. Extensive testing has demonstrated a significant improvement in conductor performance across amore » wide range of operating temperatures, indicating that E3X Technology can provide a reduction in temperature, a reduction in sag, and an increase in ampacity when applied to the surface of any overhead conductor. This report provides initial results of that testing.« less

The Self-Presentation Motives for Physical Activity Questionnaire: Instrument Development and Preliminary Construct Validity Evidence.

PubMed

Howle, Timothy C; Dimmock, James A; Whipp, Peter R; Jackson, Ben

2015-06-01

With the aim of advancing the literature on impression management in physical activity settings, we developed a theoretically derived 2 by 2 instrument that was designed to measure different types of context-specific self-presentation motives. Following item generation and expert review (Study 1), the instrument was completed by 206 group exercise class attendees (Study 2) and 463 high school physical education students (Study 3). Our analyses supported the intended factor structure (i.e., reflecting acquisitive-agentic, acquisitive-communal, protective-agentic, and protective-communal motives). We found some support for construct validity, and the self-presentation motives were associated with variables of theoretical and applied interest (e.g., impression motivation and construction, social anxiety, social and achievement goals, efficacy beliefs, engagement). Taken together, the results indicate that the Self-presentation Motives for Physical Activity Questionnaire (SMPAQ) may be useful for measuring various types of self-presentation motives in physical activity settings.

Perceived Context of Reception among Recent Hispanic Immigrants: Conceptualization, Instrument Development, and Preliminary Validation

PubMed Central

Schwartz, Seth J.; Unger, Jennifer B.; Lorenzo-Blanco, Elma I.; Des Rosiers, Sabrina E.; Villamar, Juan A.; Soto, Daniel W.; Pattarroyo, Monica; Baezconde-Garbanati, Lourdes; Szapocznik, José

2013-01-01

Context of reception has been discussed widely in the sociological and anthropological literature, but no measures of this construct exist. We designed a measure of perceived context of reception and provide initial support for the factorial validity, internal consistency reliability, and incremental and discriminant validity of scores generated by this measure. A sample of 302 recent-immigrant Hispanic parent-adolescent dyads from Miami and Los Angeles completed the new perceived context of reception measure, as well as measures of perceived discrimination; Hispanic/American cultural practices, values, and identifications; and depressive symptoms. In Phase 1, exploratory and confirmatory factor analyses extracted a factor for negative perceived context of reception. A subscale corresponding to this factor was used in Phase 2; for parents and adolescents, negative perceived context of reception and perceived discrimination were differentially associated with acculturation-related variables – suggesting discriminant validity between perceived discrimination and negative perceived context of reception. For adolescents at both sites and for parents in Los Angeles only, the negative perceived context of reception dimensions were significantly associated with depressive symptoms six months later, over and above the contribution made by perceived discrimination – suggesting incremental validity. Results are discussed in terms of perceived context of reception as a new and emerging construct. PMID:24099485

Development and validation of a fatigue assessment scale for U.S. construction workers.

PubMed

Zhang, Mingzong; Sparer, Emily H; Murphy, Lauren A; Dennerlein, Jack T; Fang, Dongping; Katz, Jeffrey N; Caban-Martinez, Alberto J

2015-02-01

To develop a fatigue assessment scale and test its reliability and validity for commercial construction workers. Using a two-phased approach, we first identified items (first phase) for the development of a Fatigue Assessment Scale for Construction Workers (FASCW) through review of existing scales in the scientific literature, key informant interviews (n = 11) and focus groups (three groups with six workers each) with construction workers. The second phase included assessment for the reliability, validity, and sensitivity of the new scale using a repeated-measures study design with a convenience sample of construction workers (n = 144). Phase one resulted in a 16-item preliminary scale that after factor analysis yielded a final 10-item scale with two sub-scales ("Lethargy" and "Bodily Ailment"). During phase two, the FASCW and its subscales demonstrated satisfactory internal consistency (alpha coefficients were FASCW [0.91], Lethargy [0.86] and Bodily Ailment [0.84]) and acceptable test-retest reliability (Pearson Correlations Coefficients: 0.59-0.68; Intraclass Correlation Coefficients: 0.74-0.80). Correlation analysis substantiated concurrent and convergent validity. A discriminant analysis demonstrated that the FASCW differentiated between groups with arthritis status and different work hours. The 10-item FASCW with good reliability and validity is an effective tool for assessing the severity of fatigue among construction workers. © 2015 Wiley Periodicals, Inc.

Perceived context of reception among recent Hispanic immigrants: conceptualization, instrument development, and preliminary validation.

PubMed

Schwartz, Seth J; Unger, Jennifer B; Lorenzo-Blanco, Elma I; Des Rosiers, Sabrina E; Villamar, Juan A; Soto, Daniel W; Pattarroyo, Monica; Baezconde-Garbanati, Lourdes; Szapocznik, José

2014-01-01

Context of reception has been discussed widely in the sociological and anthropological literature, but no measures of this construct exist. We designed a measure of perceived context of reception and provide initial support for the factorial validity, internal consistency reliability, and incremental and discriminant validity of scores generated by this measure. A sample of 302 recent-immigrant Hispanic parent-adolescent dyads from Miami and Los Angeles completed the new perceived context of reception measure, as well as measures of perceived discrimination; Hispanic/American cultural practices, values, and identifications; and depressive symptoms. In Phase 1, exploratory and confirmatory factor analyses extracted a factor for negative perceived context of reception. A subscale corresponding to this factor was used in Phase 2; for parents and adolescents, negative perceived context of reception and perceived discrimination were differentially associated with acculturation-related variables-suggesting discriminant validity between perceived discrimination and negative perceived context of reception. For adolescents at both sites and for parents in Los Angeles only, the negative perceived context of reception dimensions were significantly associated with depressive symptoms 6 months later, over and above the contribution made by perceived discrimination--suggesting incremental validity. Results are discussed in terms of perceived context of reception as a new and emerging construct.

Rocket observations of solar radiation during the eclipse of 26 February 1979

NASA Technical Reports Server (NTRS)

Bliss, H. M.; Smith, L. G.

1980-01-01

Three Nike Tomahawk rockets were launched in Red Lake, Ontario, one previous to, and two during, the total eclipse of the Sun, for the purpose of studying the atmosphere and its interaction with solar radiation. The method and preliminary results of three experiments that were used to measure solar radiation in the X-ray, Lyman-alpha, and visible parts of the spectrum are described. The instrumentation designed for this investigation is discussed as well as post-flight data processing techniques. The retrieved data were processed to some extent to verify that a valid representation of the solar radiation was obtained. The Lyman-alpha experiment yielded very good results, and preliminary data are included. The visible radiation experiment served as support for the other experiments and also functioned well. Due to a high level of energetic particles during the eclipse, the X-ray data were contaminated and are not presented. However, satellite observations indicate no appreciable level of X-rays from the Sun during the time of the eclipse.

A study of the limitations of linear theory methods as applied to sonic boom calculations

NASA Technical Reports Server (NTRS)

Darden, Christine M.

1990-01-01

Current sonic boom minimization theories have been reviewed to emphasize the capabilities and flexibilities of the methods. Flexibility is important because it is necessary for the designer to meet optimized area constraints while reducing the impact on vehicle aerodynamic performance. Preliminary comparisons of sonic booms predicted for two Mach 3 concepts illustrate the benefits of shaping. Finally, for very simple bodies of revolution, sonic boom predictions were made using two methods - a modified linear theory method and a nonlinear method - for signature shapes which were both farfield N-waves and midfield waves. Preliminary analysis on these simple bodies verified that current modified linear theory prediction methods become inadequate for predicting midfield signatures for Mach numbers above 3. The importance of impulse is sonic boom disturbance and the importance of three-dimensional effects which could not be simulated with the bodies of revolution will determine the validity of current modified linear theory methods in predicting midfield signatures at lower Mach numbers.

Preliminary study for understanding the moderating role of government regulations in telecom sector of Pakistan

NASA Astrophysics Data System (ADS)

Tariq, Beenish; Mat, Nik Kamariah Nik

2017-10-01

Telecommunication sector of Pakistan is a significant contributor toward the economic development of Pakistan. However, telecommunication sector of Pakistan underwent a lot of changes from regulatory and marketing perspective in 2015, resulting in decreased cellular penetration, dropped down the cellular subscribers and decreased telecommunication revenue. Hence, this research paper is designed to validate the constructs used in addressing the moderating role of government regulations based on Oliver's four-stage loyalty model in telecom sector of Pakistan. This preliminary study has mainly employed the quantitative method (i.e. survey questionnaire), consisting of a total of 72 items related to eight constructs under study and used 7 points Likert scale. The main analysis method used is the reliability test of the constructs. The results reveal that the Cronbach alpha readings were between 0.756 and 0.932, indicating internally consistent and reliable measures of the constructs used. This result enables the constructs to be included in the actual data collection without change.

Preliminary design package for prototype solar heating system

NASA Technical Reports Server (NTRS)

1978-01-01

A summary is given of the preliminary analysis and design activity on solar heating systems. The analysis was made without site specific data other than weather; therefore, the results indicate performance expected under these special conditions. Major items include system candidates, design approaches, trade studies and other special data required to evaluate the preliminary analysis and design. The program calls for the development and delivery of eight prototype solar heating and cooling systems for installation and operational test.

Emerging technology for advancing the treatment of epilepsy using a dynamic control framework.

PubMed

Stanslaski, Scott; Giftakis, John; Stypulkowski, Paul; Carlson, Dave; Afshar, Pedram; Cong, Peng; Denison, Timothy

2011-01-01

We briefly describe a dynamic control system framework for neuromodulation for epilepsy, with an emphasis on its practical challenges and the preliminary validation of key prototype technologies in a chronic animal model. The current state of neuromodulation can be viewed as a classical dynamic control framework such that the nervous system is the classical "plant", the neural stimulator is the controller/actuator, clinical observation, patient diaries and/or measured bio-markers are the sensor, and clinical judgment applied to these sensor inputs forms the state estimator. Technology can potentially address two main factors contributing to the performance limitations of existing systems: "observability," the ability to observe the state of the system from output measurements, and "controllability," the ability to drive the system to a desired state. In addition to improving sensors and actuator performance, methods and tools to better understand disease state dynamics and state estimation are also critical for improving therapy outcomes. We describe our preliminary validation of key "observability" and "controllability" technology blocks using an implanted research tool in an epilepsy disease model. This model allows for testing the key emerging technologies in a representative neural network of therapeutic importance. In the future, we believe these technologies might enable both first principles understanding of neural network behavior for optimizing therapy design, and provide a practical pathway towards clinical translation.

Supersonic Retro-Propulsion Experimental Design for Computational Fluid Dynamics Model Validation

NASA Technical Reports Server (NTRS)

Berry, Scott A.; Laws, Christopher T.; Kleb, W. L.; Rhode, Matthew N.; Spells, Courtney; McCrea, Andrew C.; Truble, Kerry A.; Schauerhamer, Daniel G.; Oberkampf, William L.

2011-01-01

The development of supersonic retro-propulsion, an enabling technology for heavy payload exploration missions to Mars, is the primary focus for the present paper. A new experimental model, intended to provide computational fluid dynamics model validation data, was recently designed for the Langley Research Center Unitary Plan Wind Tunnel Test Section 2. Pre-test computations were instrumental for sizing and refining the model, over the Mach number range of 2.4 to 4.6, such that tunnel blockage and internal flow separation issues would be minimized. A 5-in diameter 70-deg sphere-cone forebody, which accommodates up to four 4:1 area ratio nozzles, followed by a 10-in long cylindrical aftbody was developed for this study based on the computational results. The model was designed to allow for a large number of surface pressure measurements on the forebody and aftbody. Supplemental data included high-speed Schlieren video and internal pressures and temperatures. The run matrix was developed to allow for the quantification of various sources of experimental uncertainty, such as random errors due to run-to-run variations and bias errors due to flow field or model misalignments. Some preliminary results and observations from the test are presented, although detailed analyses of the data and uncertainties are still on going.

Design optimization of an ironless inductive position sensor for the LHC collimators

NASA Astrophysics Data System (ADS)

Danisi, A.; Masi, A.; Losito, R.; Perriard, Y.

2013-09-01

The Ironless Inductive Position Sensor (I2PS) is an air-cored displacement sensor which has been conceived to be totally immune to external DC/slowly-varying magnetic fields. It can thus be used as a valid alternative to Linear Variable Differential Transformers (LVDTs), which can show a position error in magnetic environments. In addition, since it retains the excellent properties of LVDTs, the I2PS can be used in harsh environments, such as nuclear plants, plasma control and particle accelerators. This paper focuses on the design optimization of the sensor, considering the CERN LHC Collimators as application. In particular, the optimization comes after a complete review of the electromagnetic and thermal modeling of the sensor, as well as the proper choice of the reading technique. The design optimization stage is firmly based on these preliminary steps. Therefore, the paper summarises the sensor's complete development, from its modeling to its actual implementation. A set of experimental measurements demonstrates the sensor's performances to be those expected in the design phase.

Assessing Fan Flutter Stability in the Presence of Inlet Distortion Using One-way and Two-way Coupled Methods

NASA Technical Reports Server (NTRS)

Herrick, Gregory P.

2014-01-01

Concerns regarding noise, propulsive efficiency, and fuel burn are inspiring aircraft designs wherein the propulsive turbomachines are partially (or fully)embedded within the airframe; such designs present serious concerns with regard to aerodynamic and aeromechanic performance of the compression system in response to inlet distortion. Previously, a preliminary design of a forward-swept high-speed fan exhibited flutter concerns in clean-inlet flows, and the present author then studied this fan further in the presence of off-design distorted in-flows. A three-dimensional, unsteady, Navier-Stokes computational fluid dynamics code is applied to analyze and corroborate fan performance with clean inlet flow. This code, already validated in its application to assess aerodynamic damping of vibrating blades at various flow conditions using a loosely-coupled approach, is modified to include a tightly-coupled aeroelastic simulation capability, and then loosely-coupled and tightly-coupled methods arecompared in their evaluation of flutter stability in distorted in-flows.

Test of Achievement in Quantitative Economics for Secondary Schools: Construction and Validation Using Item Response Theory

ERIC Educational Resources Information Center

Eleje, Lydia I.; Esomonu, Nkechi P. M.

2018-01-01

A Test to measure achievement in quantitative economics among secondary school students was developed and validated in this study. The test is made up 20 multiple choice test items constructed based on quantitative economics sub-skills. Six research questions guided the study. Preliminary validation was done by two experienced teachers in…

APPROACHES TO ASSESSING THE VALIDITY OF A FUNCTIONAL OBSERVATIONAL BATTERY

EPA Science Inventory

With the growing importance of neurobehavioral assessments at the preliminary stage of chemical testing, it is critical that the screening procedures utilized be valid indicators of neurobehavioral dysfunction in addition to being sensitive, specific, and reliable. fforts in this...

Subscale and Full-Scale Testing of Buckling-Critical Launch Vehicle Shell Structures

NASA Technical Reports Server (NTRS)

Hilburger, Mark W.; Haynie, Waddy T.; Lovejoy, Andrew E.; Roberts, Michael G.; Norris, Jeffery P.; Waters, W. Allen; Herring, Helen M.

2012-01-01

New analysis-based shell buckling design factors (aka knockdown factors), along with associated design and analysis technologies, are being developed by NASA for the design of launch vehicle structures. Preliminary design studies indicate that implementation of these new knockdown factors can enable significant reductions in mass and mass-growth in these vehicles and can help mitigate some of NASA s launch vehicle development and performance risks by reducing the reliance on testing, providing high-fidelity estimates of structural performance, reliability, robustness, and enable increased payload capability. However, in order to validate any new analysis-based design data or methods, a series of carefully designed and executed structural tests are required at both the subscale and full-scale level. This paper describes recent buckling test efforts at NASA on two different orthogrid-stiffened metallic cylindrical shell test articles. One of the test articles was an 8-ft-diameter orthogrid-stiffened cylinder and was subjected to an axial compression load. The second test article was a 27.5-ft-diameter Space Shuttle External Tank-derived cylinder and was subjected to combined internal pressure and axial compression.

W-026, Waste Receiving and Processing Facility data management system validation and verification report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palmer, M.E.

1997-12-05

This V and V Report includes analysis of two revisions of the DMS [data management system] System Requirements Specification (SRS) and the Preliminary System Design Document (PSDD); the source code for the DMS Communication Module (DMSCOM) messages; the source code for selected DMS Screens, and the code for the BWAS Simulator. BDM Federal analysts used a series of matrices to: compare the requirements in the System Requirements Specification (SRS) to the specifications found in the System Design Document (SDD), to ensure the design supports the business functions, compare the discreet parts of the SDD with each other, to ensure thatmore » the design is consistent and cohesive, compare the source code of the DMS Communication Module with the specifications, to ensure that the resultant messages will support the design, compare the source code of selected screens to the specifications to ensure that resultant system screens will support the design, compare the source code of the BWAS simulator with the requirements to interface with DMS messages and data transfers relating to the BWAS operations.« less

4MOST systems engineering: from conceptual design to preliminary design review

NASA Astrophysics Data System (ADS)

Bellido-Tirado, Olga; Frey, Steffen; Barden, Samuel C.; Brynnel, Joar; Giannone, Domenico; Haynes, Roger; de Jong, Roelof S.; Phillips, Daniel; Schnurr, Olivier; Walcher, Jakob; Winkler, Roland

2016-08-01

The 4MOST Facility is a high-multiplex, wide-field, brief-fed spectrograph system for the ESO VISTA telescope. It aims to create a world-class spectroscopic survey facility unique in its combination of wide-field multiplex, spectral resolution, spectral coverage, and sensitivity. At the end of 2014, after a successful concept optimization design phase, 4MOST entered into its Preliminary Design Phase. Here we present the process and tools adopted during the Preliminary Design Phase to define the subsystems specifications, coordinate the interface control documents and draft the system verification procedures.

Trade-off results and preliminary designs of Near-Term Hybrid Vehicles

NASA Technical Reports Server (NTRS)

Sandberg, J. J.

1980-01-01

Phase I of the Near-Term Hybrid Vehicle Program involved the development of preliminary designs of electric/heat engine hybrid passenger vehicles. The preliminary designs were developed on the basis of mission analysis, performance specification, and design trade-off studies conducted independently by four contractors. THe resulting designs involve parallel hybrid (heat engine/electric) propulsion systems with significant variation in component selection, power train layout, and control strategy. Each of the four designs is projected by its developer as having the potential to substitute electrical energy for 40% to 70% of the petroleum fuel consumed annually by its conventional counterpart.

Design of impact-resistant boron/aluminum large fan blade

NASA Technical Reports Server (NTRS)

Salemme, C. T.; Yokel, S. A.

1978-01-01

The technical program was comprised of two technical tasks. Task 1 encompassed the preliminary boron/aluminum fan blade design effort. Two preliminary designs were evolved. An initial design consisted of 32 blades per stage and was based on material properties extracted from manufactured blades. A final design of 36 blades per stage was based on rule-of-mixture material properties. In Task 2, the selected preliminary blade design was refined via more sophisticated analytical tools. Detailed finite element stress analysis and aero performance analysis were carried out to determine blade material frequencies and directional stresses.

Natural environment design criteria for the Space Station definition and preliminary design

NASA Astrophysics Data System (ADS)

Vaughan, W. W.; Green, C. E.

1985-03-01

The natural environment design criteria for the Space Station Program (SSP) definition and preliminary design are presented. Information on the atmospheric, dynamic and thermodynamic environments, meteoroids, radiation, magnetic fields, physical constants, etc. is provided with the intension of enabling all groups involved in the definition and preliminary design studies to proceed with a common and consistent set of natural environment criteria requirements. The space station program elements (SSPE) shall be designed with no operational sensitivity to natural environment conditions during assembly, checkout, stowage, launch, and orbital operations to the maximum degree practical.

Natural environment design criteria for the Space Station definition and preliminary design

NASA Technical Reports Server (NTRS)

Vaughan, W. W.; Green, C. E.

1985-01-01

The natural environment design criteria for the Space Station Program (SSP) definition and preliminary design are presented. Information on the atmospheric, dynamic and thermodynamic environments, meteoroids, radiation, magnetic fields, physical constants, etc. is provided with the intension of enabling all groups involved in the definition and preliminary design studies to proceed with a common and consistent set of natural environment criteria requirements. The space station program elements (SSPE) shall be designed with no operational sensitivity to natural environment conditions during assembly, checkout, stowage, launch, and orbital operations to the maximum degree practical.

[Validation of the Questionnaire of Emotional Maladjustment and Adaptive Resources in Infertility (DERA)].

PubMed

Moreno-Rosset, Carmen; Antequera Jurado, Rosario; Jenaro Río, Cristina

2009-02-01

Validation of the Questionnaire of Emotional Maladjustment and Adaptive Resources in Infertility (DERA). Given the absence of measures to help psychologists working with infertile couples, this paper presents the process of developing a standardized measure to assess emotional maladjustment and adaptive resources in this population. A cross-sectional design was utilized to gather data from the assisted reproduction units of two public hospitals. Preliminary analyses were performed with a sample of 85 infertile patients. Psychometric properties of the measure were tested with a second sample of 490 infertile patients. Concerning reliability analyses, alpha indexes were adequate both for the measure and its factors. Concerning validity, second-order factor analysis yielded a four-factor solution that conjointly explains 56% of the total variance. Additional analyses with a third sample of 50 participants from the general population matched with a sample of 50 infertile participants were performed. In sum, this measure seems to be a useful psychological assessment tool to determine emotional adjustment, and individual, and interpersonal resources, for coping with infertility diagnosis and treatment.

Impact of Cross-Axis Structural Dynamics on Validation of Linear Models for Space Launch System

NASA Technical Reports Server (NTRS)

Pei, Jing; Derry, Stephen D.; Zhou Zhiqiang; Newsom, Jerry R.

2014-01-01

A feasibility study was performed to examine the advisability of incorporating a set of Programmed Test Inputs (PTIs) during the Space Launch System (SLS) vehicle flight. The intent of these inputs is to provide validation to the preflight models for control system stability margins, aerodynamics, and structural dynamics. During October 2009, Ares I-X program was successful in carrying out a series of PTI maneuvers which provided a significant amount of valuable data for post-flight analysis. The resulting data comparisons showed excellent agreement with the preflight linear models across the frequency spectrum of interest. However unlike Ares I-X, the structural dynamics associated with the SLS boost phase configuration are far more complex and highly coupled in all three axes. This presents a challenge when implementing this similar system identification technique to SLS. Preliminary simulation results show noticeable mismatches between PTI validation and analytical linear models in the frequency range of the structural dynamics. An alternate approach was examined which demonstrates the potential for better overall characterization of the system frequency response as well as robustness of the control design.

Testing and Modeling of a 3-MW Wind Turbine Using Fully Coupled Simulation Codes (Poster)

DOE Office of Scientific and Technical Information (OSTI.GOV)

LaCava, W.; Guo, Y.; Van Dam, J.

This poster describes the NREL/Alstom Wind testing and model verification of the Alstom 3-MW wind turbine located at NREL's National Wind Technology Center. NREL,in collaboration with ALSTOM Wind, is studying a 3-MW wind turbine installed at the National Wind Technology Center(NWTC). The project analyzes the turbine design using a state-of-the-art simulation code validated with detailed test data. This poster describes the testing and the model validation effort, and provides conclusions about the performance of the unique drive train configuration used in this wind turbine. The 3-MW machine has been operating at the NWTC since March 2011, and drive train measurementsmore » will be collected through the spring of 2012. The NWTC testing site has particularly turbulent wind patterns that allow for the measurement of large transient loads and the resulting turbine response. This poster describes the 3-MW turbine test project, the instrumentation installed, and the load cases captured. The design of a reliable wind turbine drive train increasingly relies on the use of advanced simulation to predict structural responses in a varying wind field. This poster presents a fully coupled, aero-elastic and dynamic model of the wind turbine. It also shows the methodology used to validate the model, including the use of measured tower modes, model-to-model comparisons of the power curve, and mainshaft bending predictions for various load cases. The drivetrain is designed to only transmit torque to the gearbox, eliminating non-torque moments that are known to cause gear misalignment. Preliminary results show that the drivetrain is able to divert bending loads in extreme loading cases, and that a significantly smaller bending moment is induced on the mainshaft compared to a three-point mounting design.« less

A preliminary correlation of the orbiter stability and control aerodynamics from the first two Space Shuttle flights /STS-1 & 2/ with preflight predictions

NASA Technical Reports Server (NTRS)

Underwood, J. M.; Cooke, D. R.

1982-01-01

A correlation of the stability and control derivatives from flight (STS-1 & 2) with preflight predictions is presented across the Mach range from 0.9 to 25. Flight data obtained from specially designed flight test maneuvers as well as from conventional bank maneuvers generally indicate good agreement with predicted data. However, the vehicle appears to be lateral-directionally more stable than predicted in the transonic regime. Aerodynamic 'reasonableness tests' are employed to test for validity of flight data. The importance of testing multiple models in multiple wind tunnels at the same test conditions is demonstrated.

Atmosphere behavior in gas-closed mouse-algal systems - An experimental and modelling study

NASA Technical Reports Server (NTRS)

Averner, M. M.; Moore, B., III; Bartholomew, I.; Wharton, R.

1984-01-01

A NASA-sponsored research program initiated using mathematical modelling and laboratory experimentation aimed at examining the gas-exchange characteristics of artificial animal/plant systems closed to the ambient atmosphere is studied. The development of control techniques and management strategies for maintaining the atmospheric levels of carbon dioxide and oxygen at physiological levels is considered. A mathematical model simulating the behavior of a gas-closed mouse-algal system under varying environmental conditions is described. To verify and validate the model simulations, an analytical system with which algal growth and gas exchange characteristics can be manipulated and measured is designed, fabricated, and tested. The preliminary results are presented.

Object-oriented productivity metrics

NASA Technical Reports Server (NTRS)

Connell, John L.; Eller, Nancy

1992-01-01

Software productivity metrics are useful for sizing and costing proposed software and for measuring development productivity. Estimating and measuring source lines of code (SLOC) has proven to be a bad idea because it encourages writing more lines of code and using lower level languages. Function Point Analysis is an improved software metric system, but it is not compatible with newer rapid prototyping and object-oriented approaches to software development. A process is presented here for counting object-oriented effort points, based on a preliminary object-oriented analysis. It is proposed that this approach is compatible with object-oriented analysis, design, programming, and rapid prototyping. Statistics gathered on actual projects are presented to validate the approach.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nawaz, Kashif

Separate sensible and latent cooling systems offer significant increases in the overall performance of cooling/dehumidification systems compared with conventional vapor-compression air-conditioning systems. Key to the energy efficiency of such systems is the performance of the heat and mass exchangers that provide sensible cooling and dehumidification. A novel design is proposed for dehumidification applications, deploying metal foam as a substrate coated with solid desiccants. The current report provides some preliminary information regarding the development of the technology and discusses factors such as manufacturing of desiccants, characterization of desiccants, and development of the metal foam heat exchanger. All three aspects provide themore » necessary infrastructure for further development and validation of the proposed concept.« less

Factorial Structure of the Pain Rehabilitation Expectations Scale: A Preliminary Study

ERIC Educational Resources Information Center

Cheing, Gladys L. Y.; Lai, Amy K. M.; Vong, Sinfia K. S.; Chan, Fong H.

2010-01-01

The aim of this study was to report the preliminary validation results for the Pain Rehabilitation Expectations Scale (PRES). The PRES is a clinical tool developed to measure the expectations about rehabilitation treatment and outcome for people with back pain. Fifty people with chronic back pain were recruited from 11 physiotherapy outpatient…

The Coordinators of Psychiatric Education (COPE) Residency In-Training Exam: A Preliminary Psychometric Assessment

ERIC Educational Resources Information Center

Montgomery, Gregory P. J.; Crockford, David N.; Hecker, Kent

2010-01-01

Objective: The Coordinators of Psychiatric Education (COPE) Residency In-Training Exam is a formative exam for Canadian psychiatric residents that was reconstructed using assessment best practices. An assessment of psychometric properties was subsequently performed on the exam to ensure preliminary validity and reliability. Methods: An exam…

Preliminary Impacts of North Carolina's Rural Innovative Schools Project

ERIC Educational Resources Information Center

Naumenko, Oksana; Henson, Robert; Hutchins, Bryan

2016-01-01

Funded by an Investing in Innovation (i3) Validation grant, the Rural Innovative Schools (RIS) Project is the first widespread effort to scale up the early college model by implementing it in comprehensive high schools. This paper will present preliminary findings from the evaluation of this project. The impact study uses a quasi-experimental…

Preliminary Design of ArchE: A Software Architecture Design Assistant

DTIC Science & Technology

2003-09-01

This report presents a procedure for moving from a set of quality attribute scenarios to an architecture design that satisfies those scenarios. This...procedure is embodied in a preliminary design for an architecture design assistant named ArchE (Architecture Expert), which will be implemented on a

Preliminary Validation of a German Version of the Sexual Complaints Screener for Women in a Female Population Sample.

PubMed

Burri, Andrea; Porst, Hartmut

2018-06-01

To date, neither the original English nor any of the translated versions of the Sexual Complaints Screener for Women (SCS-W) have been tested for their psychometric properties. To evaluate the validity and utility of the German version of the SCS-W by assessing content, convergent, and discriminant validity. A population sample of 309 women (mean age = 26.9 years) completed the online survey and had matching data available on the SCS-W and the Female Sexual Function Index (FSFI). Spearman bivariate correlations between the SCS-W and FSFI domain scores and exploratory factor analysis with principal component analysis were conducted. Convergent validity was excellent for the domain of orgasm, good for satisfaction, dyspareunia, and the total questionnaire score, and acceptable for desire, lubrication, arousal, and vaginismus. Discriminant validity was present for all domains apart from arousal, lubrication, and vaginismus. Varimax rotation suggested an 8-factor model was the most robust. This brief screener seems suitable to provide a brief overview of female patients' sexual problems in a clinical setting. This is the 1st study to assess the psychometric properties of the German version of the SCS-W. However, available information on the psychometric properties of the German SCS-W was limited because the validity of the screener could not be counterchecked against a clinical diagnosis of female sexual dysfunction. Our results provide preliminary evidence of good validity of the German version of the SCS-W. Overall, the SCS-W can offer support for clinicians who are less familiar with sexual medicine and who might not routinely discuss sexual issues with their patients. Burri A, Porst H. Preliminary Validation of a German Version of the Sexual Complaints Screener for Women in a Female Population Sample. Sex Med 2018;6:123-130. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

Some experiences in aircraft aeroelastic design using Preliminary Aeroelastic Design of Structures (PAD)

NASA Technical Reports Server (NTRS)

Radovcich, N. A.

1984-01-01

The design experience associated with a benchmark aeroelastic design of an out of production transport aircraft is discussed. Current work being performed on a high aspect ratio wing design is reported. The Preliminary Aeroelastic Design of Structures (PADS) system is briefly summarized and some operational aspects of generating the design in an automated aeroelastic design environment are discussed.

Validation of the three web quality dimensions of a minimally invasive surgery e-learning platform.

PubMed

Ortega-Morán, Juan Francisco; Pagador, J Blas; Sánchez-Peralta, Luisa Fernanda; Sánchez-González, Patricia; Noguera, José; Burgos, Daniel; Gómez, Enrique J; Sánchez-Margallo, Francisco M

2017-11-01

E-learning web environments, including the new TELMA platform, are increasingly being used to provide cognitive training in minimally invasive surgery (MIS) to surgeons. A complete validation of this MIS e-learning platform has been performed to determine whether it complies with the three web quality dimensions: usability, content and functionality. 21 Surgeons participated in the validation trials. They performed a set of tasks in the TELMA platform, where an e-MIS validity approach was followed. Subjective (questionnaires and checklists) and objective (web analytics) metrics were analysed to achieve the complete validation of usability, content and functionality. The TELMA platform allowed access to didactic content with easy and intuitive navigation. Surgeons performed all tasks with a close-to-ideal number of clicks and amount of time. They considered the design of the website to be consistent (95.24%), organised (90.48%) and attractive (85.71%). Moreover, they gave the content a high score (4.06 out of 5) and considered it adequate for teaching purposes. The surgeons scored the professional language and content (4.35), logo (4.24) and recommendations (4.20) the highest. Regarding functionality, the TELMA platform received an acceptance of 95.24% for navigation and 90.48% for interactivity. According to the study, it seems that TELMA had an attractive design, innovative content and interactive navigation, which are three key features of an e-learning platform. TELMA successfully met the three criteria necessary for consideration as a website of quality by achieving more than 70% of agreements regarding all usability, content and functionality items validated; this constitutes a preliminary requirement for an effective e-learning platform. However, the content completeness, authoring tool and registration process required improvement. Finally, the e-MIS validity methodology used to measure the three dimensions of web quality in this work can be applied to other clinical areas or training fields. Copyright © 2017 Elsevier B.V. All rights reserved.

A method and knowledge base for automated inference of patient problems from structured data in an electronic medical record

PubMed Central

Pang, Justine; Feblowitz, Joshua C; Maloney, Francine L; Wilcox, Allison R; Ramelson, Harley Z; Schneider, Louise I; Bates, David W

2011-01-01

Background Accurate knowledge of a patient's medical problems is critical for clinical decision making, quality measurement, research, billing and clinical decision support. Common structured sources of problem information include the patient problem list and billing data; however, these sources are often inaccurate or incomplete. Objective To develop and validate methods of automatically inferring patient problems from clinical and billing data, and to provide a knowledge base for inferring problems. Study design and methods We identified 17 target conditions and designed and validated a set of rules for identifying patient problems based on medications, laboratory results, billing codes, and vital signs. A panel of physicians provided input on a preliminary set of rules. Based on this input, we tested candidate rules on a sample of 100 000 patient records to assess their performance compared to gold standard manual chart review. The physician panel selected a final rule for each condition, which was validated on an independent sample of 100 000 records to assess its accuracy. Results Seventeen rules were developed for inferring patient problems. Analysis using a validation set of 100 000 randomly selected patients showed high sensitivity (range: 62.8–100.0%) and positive predictive value (range: 79.8–99.6%) for most rules. Overall, the inference rules performed better than using either the problem list or billing data alone. Conclusion We developed and validated a set of rules for inferring patient problems. These rules have a variety of applications, including clinical decision support, care improvement, augmentation of the problem list, and identification of patients for research cohorts. PMID:21613643

Electronic medical record system at an opioid agonist treatment programme: study design, pre-implementation results and post-implementation trends.

PubMed

Kritz, Steven; Brown, Lawrence S; Chu, Melissa; John-Hull, Carlota; Madray, Charles; Zavala, Roberto; Louie, Ben

2012-08-01

Electronic medical record (EMR) systems are commonly included in health care reform discussions. However, their embrace by the health care community has been slow. At Addiction Research and Treatment Corporation, an outpatient opioid agonist treatment programme that also provides primary medical care, HIV medical care and case management, substance abuse counselling and vocational services, we studied the implementation of an EMR in the domains of quality, productivity, satisfaction, risk management and financial performance utilizing a prospective pre- and post-implementation study design. This report details the research approach, pre-implementation findings for all five domains, analysis of the pre-implementation findings and some preliminary post-implementation results in the domains of quality and risk management. For quality, there was a highly statistically significant improvement in timely performance of annual medical assessments (P < 0.001) and annual multidiscipline assessments (P < 0.0001). For risk management, the number of events was not sufficient to perform valid statistical analysis. The preliminary findings in the domain of quality are very promising. Should the findings in the other domains prove to be positive, then the impetus to implement EMR in similar health care facilities will be advanced. © 2011 Blackwell Publishing Ltd.

Low-Pressure Testing of the Mars Science Laboratory’s Solid Sampling System: Test Methods and Preliminary Results

NASA Astrophysics Data System (ADS)

Mukherjee, S.; von der Heydt, M.; Hanson, C.; Jandura, L.

2009-12-01

The Mars Science Laboratory mission is scheduled to launch in 2011 with an extensive suite of in situ science instruments. Acquiring, processing and delivering appropriate samples of rock and martian regolith to the instruments is a critical component in realizing the science capability of these payload elements. However, there are a number of challenges in validating the design of these systems. In particular, differences in the environment (atmospheric pressure and composition, temperature, gravity), target materials (variation in rock and soil properties), and state of the hardware (electrical potential, particulate coatings) may effect sampling performance. To better understand the end-to-end system and allow development of mitigation strategies if necessary, early testing of high-fidelity engineering models of the hardware in the solid sample chain is being conducted. The components of the sample acquisition, processing & delivery chain that will be tested are the drill, scoop, sieves, portioners, and instrument inlet funnels. An evaluation of the environmental parameter space was conducted to identify a subset that may have significant effects on sampling performance and cannot be well bounded by analysis. Accordingly, support equipment to enable testing at Mars surface pressures (5-10 Torr), with carbon dioxide was designed and built. A description of the testing set-up, investigations, and preliminary results will be presented.

Aura Atmospheric Data Products and Their Availability from NASA Goddard Earth Sciences DAAC

NASA Technical Reports Server (NTRS)

Ahmad, S.; Johnson, J.; Gopalan, A.; Smith, P.; Leptoukh, G.; Kempler, S.

2004-01-01

NASA's EOS-Aura spacecraft was launched successfully on July 15, 2004. The four instruments onboard the spacecraft are the Microwave Limb Sounder (MLS), the Ozone Monitoring Instrument (OMI), the Tropospheric Emission Spectrometer (TES), and the High Resolution Dynamics Limb Sounder (HBDLS). The Aura instruments are designed to gather earth sciences measurements across the ultraviolet, visible, infra-red, thermal and microwave regions of the electromagnetic spectrum. Aura will provide over 70 distinct standard atmospheric data products for use in ozone layer and surface UV-B monitoring, air quality forecast, and atmospheric chemistry and climate change studies (http://eosaura.gsfc.nasa.gov/). These products include earth-atmosphere radiances and solar spectral irradiances; total column, tropospheric, and profiles of ozone and other trace gases, surface W-B flux; clouds and aerosol characteristics; and temperature, geopotential height, and water vapor profiles. The MLS, OMI, and HIRDLS data products will be archived at the NASA Goddard Earth Sciences (GES) Distributed Active Archive Center (DAAC), while data from TES will be archived at NASA Langley Research Center DAAC. Some of the standard products which have gone through quick preliminary checks are already archived at the GES DAAC (http://daac.nsfc.nasa.gov/) and are available to the Aura science team and data validation team members for data validation; and to the application and visualization software developers, for testing their application modules. Once data are corrected for obvious calibration problems and partially validated using in-situ observations, they would be made available to the broader user community. This presentation will provide details of the whole suite of Aura atmospheric data products, and the time line of the availability of the rest of the preliminary products and of the partially validated provisional products. Software and took available for data access, visualization, and data mining will also be discussed.

Preliminary validation study of the Russian Birmingham Cognitive Screen.

PubMed

Kuzmina, E; Humphreys, G W; Riddoch, M J; Skvortsov, A A; Weekes, B S

2018-02-01

The Birmingham Cognitive Screen (BCoS) is designed for use with individuals who have acquired language impairment following stroke. Our goal was to develop a Russian version of the BCoS (Rus-BCoS) by translating the battery following cultural and linguistic adaptations and establishing preliminary data on its psychometric properties. Fifty patients with left-hemisphere stroke were recruited, of whom 98% were diagnosed with mild to moderate aphasia. To check whether the Rus-BCoS provides stable and consistent scores, internal consistency, test-retest, and interrater types of reliability were determined. Eight participants with stroke and 20 neurologically intact participants were assessed twice. To inspect the discriminative power of the battery, 63 participants without brain impairment were tested with the Rus-BCoS. Additionally, the Russian version of the Montreal Cognitive Assessment (MoCA), Quantitative Assessment of Speech in Aphasia, and Luria's Neuropsychological Assessment Battery were used to examine convergent validity, sensitivity, and specificity of the Rus-BCoS. The internal consistency as well as test-retest and interrater reliability of the Rus-BCoS satisfied criteria for the research use. Performance on a majority of tasks in the battery correlated significantly with independently validated tests that putatively measure similar cognitive processes. Critically, all patients with aphasia returned nonzero scores in at least one task in all the Rus-BCoS sections, with the exception of the Controlled Attention section where two patients with severe executive control deficits could not perform. The Rus-BCoS shows promise as a comprehensive cognitive screening tool that can be used by clinicians working with Russian-speaking persons experiencing poststroke aphasia after much further validation and development of reliable normative standards. Given a lack of quantitative neuropsychological assessment tools in Russia, however, we contend the Rus-BCoS offers potential benefits to clinicians and patients. However, data from research studies with a broader sample of Russian speakers are needed.

Health-related quality of life questionnaire for polycystic ovary syndrome (PCOSQ-50): development and psychometric properties.

PubMed

Nasiri-Amiri, Fatemeh; Ramezani Tehrani, Fahimeh; Simbar, Masoumeh; Montazeri, Ali; Mohammadpour, Reza Ali

2016-07-01

The determinants of the health-related quality of life of women with polycystic ovary syndrome are not fully understood. The aim of this study was to develop a comprehensive instrument to assess the health-related quality of life of Iranian women with PCOS and to assess its psychometric properties. We used a mixed-method, sequential, exploratory design including both qualitative [in-depth interview to define the components of health-related quality of life questionnaire (PCOSQ)] and quantitative approaches (to assess the psychometric properties of PCOSQ). A preliminary questionnaire was developed including 147 items which emerged from the qualitative phase of the study. Considering the optimum cutoff points for content validity ratio (CVR), content validity index (CVI), and impact score, items of the preliminary questionnaire were reduced from 147 to 88 items. Finally, by excluding highly correlated items using the exploratory factor analysis, a 50-item questionnaire was obtained. The Kaiser criteria (eigenvalues >1) and Scree plot tests demonstrated that six factors were optimum with an estimated 47.3 % of variance. Assessment of the psychometric properties of the questionnaire demonstrated a mean CVI = 0.92, CVR = 0.91, Cronbach's alpha for whole questionnaire = 0.88 (0.61-0.88 for subscales), Spearman's correlation coefficients of test-retest = 0.75, and the intra-class correlation coefficient for the PCOS questionnaire subscales ranging from 0.57 to 0.88. Eventually the final questionnaire included 50 items in six domains, 'psychosocial and emotional,' 'fertility,' 'sexual function,' 'obesity and menstrual disorders,' 'hirsutism,' and 'coping' and rated on a 5-point Likert scale. The PCOSQ-50 is a valid and reliable instrument for the assessment of quality of life of women with PCOS, capable of assessing some obscure aspects overlooked by previous HRQL questionnaires.

Preliminary bioelectrical impedance analysis (BIA) equation for body composition assessment in young females from Colombia

NASA Astrophysics Data System (ADS)

Caicedo-Eraso, J. C.; González-Correa, C. H.; González-Correa, C. A.

2013-04-01

A previous study showed that reported BIA equations for body composition are not suitable for Colombian population. The purpose of this study was to develop and validate a preliminary BIA equation for body composition assessment in young females from Colombia, using hydrodensitometry as reference method. A sample of 30 young females was evaluated. Inclusion and exclusion criteria were defined to minimize the variability of BIA. Height, weight, BIA, residual lung volume (RV) and underwater weight (UWW) were measured. A preliminary BIA equation was developed (r2 = 0.72, SEE = 2.48 kg) by stepwise multiple regression with fat-free mass (FFM) as dependent variable and weight, height and impedance measurements as independent variables. The quality of regression was evaluated and a cross-validation against 50% of sample confirmed that results obtained with the preliminary BIA equation is interchangeable with results obtained with hydrodensitometry (r2 = 0.84, SEE = 2.62 kg). The preliminary BIA equation can be used for body composition assessment in young females from Colombia until a definitive equation is developed. The next step will be increasing the sample, including a second reference method, as deuterium oxide dilution (D2O), and using multi-frequency BIA (MF-BIA). It would also be desirable to develop equations for males and other ethnic groups in Colombia.

Reliability and validity of clinical tests to assess the anatomical integrity of the cervical spine in adults with neck pain and its associated disorders: Part 1-A systematic review from the Cervical Assessment and Diagnosis Research Evaluation (CADRE) Collaboration.

PubMed

Lemeunier, Nadège; da Silva-Oolup, S; Chow, N; Southerst, D; Carroll, L; Wong, J J; Shearer, H; Mastragostino, P; Cox, J; Côté, E; Murnaghan, K; Sutton, D; Côté, P

2017-09-01

To determine the reliability and validity of clinical tests to assess the anatomical integrity of the cervical spine in adults with neck pain and its associated disorders. We updated the systematic review of the 2000-2010 Bone and Joint Decade Task Force on Neck Pain and its Associated Disorders. We also searched the literature to identify studies on the reliability and validity of Doppler velocimetry for the evaluation of cervical arteries. Two independent reviewers screened and critically appraised studies. We conducted a best evidence synthesis of low risk of bias studies and ranked the phases of investigations using the classification proposed by Sackett and Haynes. We screened 9022 articles and critically appraised 8 studies; all 8 studies had low risk of bias (three reliability and five validity Phase II-III studies). Preliminary evidence suggests that the extension-rotation test may be reliable and has adequate validity to rule out pain arising from facet joints. The evidence suggests variable reliability and preliminary validity for the evaluation of cervical radiculopathy including neurological examination (manual motor testing, dermatomal sensory testing, deep tendon reflexes, and pathological reflex testing), Spurling's and the upper limb neurodynamic tests. No evidence was found for doppler velocimetry. Little evidence exists to support the use of clinical tests to evaluate the anatomical integrity of the cervical spine in adults with neck pain and its associated disorders. We found preliminary evidence to support the use of the extension-rotation test, neurological examination, Spurling's and the upper limb neurodynamic tests.

The quality improvement attitude survey: Development and preliminary psychometric characteristics.

PubMed

Dunagan, Pamela B

2017-12-01

To report the development of a tool to measure nurse's attitudes about quality improvement in their practice setting and to examine preliminary psychometric characteristics of the Quality Improvement Nursing Attitude Scale. Human factors such as nursing attitudes of complacency have been identified as root causes of sentinel events. Attitudes of nurses concerning use of Quality and Safety Education for nurse's competencies can be most challenging to teach and to change. No tool has been developed measuring attitudes of nurses concerning their role in quality improvement. A descriptive study design with preliminary psychometric evaluation was used to examine the preliminary psychometric characteristics of the Quality Improvement Nursing Attitude Scale. Registered bedside clinical nurses comprised the sample for the study (n = 57). Quantitative data were analysed using descriptive statistics and Cronbach's alpha reliability. Total score and individual item statistics were evaluated. Two open-ended items were used to collect statements about nurses' feelings regarding their experience in quality improvement efforts. Strong support for the internal consistency reliability and face validity of the Quality Improvement Nursing Attitude Scale was found. Total scale scores were high indicating nurse participants valued Quality and Safety Education for Nurse competencies in practice. However, item-level statistics indicated nurses felt powerless when other nurses deviate from care standards. Additionally, the sample indicated they did not consistently report patient safety issues and did not have a feeling of value in efforts to improve care. Findings suggested organisational culture fosters nurses' reporting safety issues and feeling valued in efforts to improve care. Participants' narrative comments and item analysis revealed the need to generate new items for the Quality Improvement Nursing Attitude Scale focused on nurses' perception of their importance in quality and safety and their power to enact principles. The Quality Improvement Nursing Attitude Scale-Revised edition was designed to help in understanding nurses' attitudes and values. It can be used to further explore broad concepts of quality improvement efforts. © 2017 John Wiley & Sons Ltd.

Design and validation of a microfluidic device for blood-brain barrier monitoring and transport studies

NASA Astrophysics Data System (ADS)

Ugolini, Giovanni Stefano; Occhetta, Paola; Saccani, Alessandra; Re, Francesca; Krol, Silke; Rasponi, Marco; Redaelli, Alberto

2018-04-01

In vitro blood-brain barrier models are highly relevant for drug screening and drug development studies, due to the challenging task of understanding the transport mechanism of drug molecules through the blood-brain barrier towards the brain tissue. In this respect, microfluidics holds potential for providing microsystems that require low amounts of cells and reagent and can be potentially multiplexed for increasing the ease and throughput of the drug screening process. We here describe the design, development and validation of a microfluidic device for endothelial blood-brain barrier cell transport studies. The device comprises of two microstructured layers (top culture chamber and bottom collection chamber) sandwiching a porous membrane for the cell culture. Microstructured layers include two pairs of physical electrodes, embedded into the device layers by geometrically defined guiding channels with computationally optimized positions. These electrodes allow the use of commercial electrical measurement systems for monitoring trans-endothelial electrical resistance (TEER). We employed the designed device for performing preliminary assessment of endothelial barrier formation with murine brain endothelial cells (Br-bEnd5). Results demonstrate that cellular junctional complexes effectively form in the cultures (expression of VE-Cadherin and ZO-1) and that the TEER monitoring systems effectively detects an increase of resistance of the cultured cell layers indicative of tight junction formation. Finally, we validate the use of the described microsystem for drug transport studies demonstrating that Br-bEnd5 cells significantly hinder the transport of molecules (40 kDa and 4 kDa dextran) from the top culture chamber to the bottom collection chamber.

A knowledge-based design framework for airplane conceptual and preliminary design

NASA Astrophysics Data System (ADS)

Anemaat, Wilhelmus A. J.

The goal of work described herein is to develop the second generation of Advanced Aircraft Analysis (AAA) into an object-oriented structure which can be used in different environments. One such environment is the third generation of AAA with its own user interface, the other environment with the same AAA methods (i.e. the knowledge) is the AAA-AML program. AAA-AML automates the initial airplane design process using current AAA methods in combination with AMRaven methodologies for dependency tracking and knowledge management, using the TechnoSoft Adaptive Modeling Language (AML). This will lead to the following benefits: (1) Reduced design time: computer aided design methods can reduce design and development time and replace tedious hand calculations. (2) Better product through improved design: more alternative designs can be evaluated in the same time span, which can lead to improved quality. (3) Reduced design cost: due to less training and less calculation errors substantial savings in design time and related cost can be obtained. (4) Improved Efficiency: the design engineer can avoid technically correct but irrelevant calculations on incomplete or out of sync information, particularly if the process enables robust geometry earlier. Although numerous advancements in knowledge based design have been developed for detailed design, currently no such integrated knowledge based conceptual and preliminary airplane design system exists. The third generation AAA methods are tested over a ten year period on many different airplane designs. Using AAA methods will demonstrate significant time savings. The AAA-AML system will be exercised and tested using 27 existing airplanes ranging from single engine propeller, business jets, airliners, UAV's to fighters. Data for the varied sizing methods will be compared with AAA results, to validate these methods. One new design, a Light Sport Aircraft (LSA), will be developed as an exercise to use the tool for designing a new airplane. Using these tools will show an improvement in efficiency over using separate programs due to the automatic recalculation with any change of input data. The direct visual feedback of 3D geometry in the AAA-AML, will lead to quicker resolving of problems as opposed to conventional methods.

Conical scan impact study. Volume 2: Small local user data processing facility. [multispectral band scanner design alternatives for earth resources data

NASA Technical Reports Server (NTRS)

Ebert, D. H.; Chase, P. E.; Dye, J.; Fahline, W. C.; Johnson, R. H.

1973-01-01

The impact of a conical scan versus a linear scan multispectral scanner (MSS) instrument on a small local-user data processing facility was studied. User data requirements were examined to determine the unique system rquirements for a low cost ground system (LCGS) compatible with the Earth Observatory Satellite (EOS) system. Candidate concepts were defined for the LCGS and preliminary designs were developed for selected concepts. The impact of a conical scan MSS versus a linear scan MSS was evaluated for the selected concepts. It was concluded that there are valid user requirements for the LCGS and, as a result of these requirements, the impact of the conical scanner is minimal, although some new hardware development for the LCGS is necessary to handle conical scan data.

The NASA Lewis integrated propulsion and flight control simulator

NASA Technical Reports Server (NTRS)

Bright, Michelle M.; Simon, Donald L.

1991-01-01

A new flight simulation facility was developed at NASA-Lewis. The purpose of this flight simulator is to allow integrated propulsion control and flight control algorithm development and evaluation in real time. As a preliminary check of the simulator facility capabilities and correct integration of its components, the control design and physics models for a short take-off and vertical landing fighter aircraft model were shown, with their associated system integration and architecture, pilot vehicle interfaces, and display symbology. The initial testing and evaluation results show that this fixed based flight simulator can provide real time feedback and display of both airframe and propulsion variables for validation of integrated flight and propulsion control systems. Additionally, through the use of this flight simulator, various control design methodologies and cockpit mechanizations can be tested and evaluated in a real time environment.

Preliminary evidence for validity of the Bahasa Indonesian version of Study Process Questionnaire.

PubMed

Liem, Arief Darmanegara; Prasetya, Paulus Hidajat

2007-02-01

This study provides preliminary evidence for the validity of the Bahasa Indonesian version of the Study Process Questionnaire (BI-SPQ) from a sample of 147 psychology students (22 men and 125 women; M age = 21.8 yr., SD = 1.3). The internal consistency alpha of the BI-SPQ subscales were found to range from .46 (Surface Strategy) to .77 (Deep Strategy), with a median of .67. Principal component analysis indicated a two-factor solution, where the Deep and Achieving subscales loaded onto Factor 1 and the Surface subscales loaded on Factor 2. Students' GPAs were associated negatively with Surface Motive (r = -.24) and were associated positively with Deep and Achieving Motives (rs = .20). Further studies with larger samples involving students majoring in other disciplines are needed to provide further evidence of the validity of the BI-SPQ.

Preliminary design approach for large high precision segmented reflectors

NASA Technical Reports Server (NTRS)

Mikulas, Martin M., Jr.; Collins, Timothy J.; Hedgepeth, John M.

1990-01-01

A simplified preliminary design capability for erectable precision segmented reflectors is presented. This design capability permits a rapid assessment of a wide range of reflector parameters as well as new structural concepts and materials. The preliminary design approach was applied to a range of precision reflectors from 10 meters to 100 meters in diameter while considering standard design drivers. The design drivers considered were: weight, fundamental frequency, launch packaging volume, part count, and on-orbit assembly time. For the range of parameters considered, on-orbit assembly time was identified as the major design driver. A family of modular panels is introduced which can significantly reduce the number of reflector parts and the on-orbit assembly time.

40 CFR 610.24 - Validity of test data.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Validity of test data. 610.24 Section 610.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY RETROFIT DEVICES Test Procedures and Evaluation Criteria Evaluation Criteria for the Preliminary...

40 CFR 610.24 - Validity of test data.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Validity of test data. 610.24 Section 610.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY RETROFIT DEVICES Test Procedures and Evaluation Criteria Evaluation Criteria for the Preliminary...

40 CFR 610.24 - Validity of test data.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Validity of test data. 610.24 Section 610.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY RETROFIT DEVICES Test Procedures and Evaluation Criteria Evaluation Criteria for the Preliminary...

40 CFR 610.24 - Validity of test data.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Validity of test data. 610.24 Section 610.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY RETROFIT DEVICES Test Procedures and Evaluation Criteria Evaluation Criteria for the Preliminary...

40 CFR 610.24 - Validity of test data.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Validity of test data. 610.24 Section 610.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY RETROFIT DEVICES Test Procedures and Evaluation Criteria Evaluation Criteria for the Preliminary...

Development and preliminary validation of the physician support of skin self-examination scale.

PubMed

Coroiu, Adina; Moran, Chelsea; Garland, Rosalind; Körner, Annett

2018-05-01

Skin self-examination (SSE) is a crucial preventive health behaviour in melanoma survivors, as it facilitates early detection. Physician endorsement of SSE is important for the initiation and maintenance of this behaviour. This study focussed on the preliminary validation of a new nine-item measure assessing physician support of SSE in melanoma patients. English and French versions of this measure were administered to 188 patients diagnosed with melanoma in the context of a longitudinal study investigating predictors and facilitators of SSE. Structural validity was investigated using exploratory factor analysis conducted in Mplus and convergent and divergent validity was assessed using bivariate correlations conducted in spss. Results suggest that the scale is a unidimensional and reliable measure of physician support for SSE. Given the uncertainty regarding the optimal frequency of SSE for at-risk individuals, we recommend that future psychometric evaluations of this scale consider tailoring items according to the most up-to-date research on SSE effectiveness.

Fly's Eye GLM Simulator Preliminary Validation Analysis

NASA Astrophysics Data System (ADS)

Quick, M. G.; Christian, H. J., Jr.; Blakeslee, R. J.; Stewart, M. F.; Corredor, D.; Podgorny, S.

2017-12-01

As part of the validation effort for the Geostationary Lightning Mapper (GLM) an airborne radiometer array has been fabricated to observe lightning optical emission through the cloud top. The Fly's Eye GLM Simulator (FEGS) is a multi-spectral, photo-electric radiometer array with a nominal spatial resolution of 2 x 2 km and spatial footprint of 10 x 10 km at cloud top. A main 25 pixel array observes the 777.4 nm oxygen emission triplet using an optical passband filter with a 10 nm FWHM, a sampling rate of 100 kHz, and 16 bit resolution. From March to May of 2017 FEGS was flown on the NASA ER-2 high altitude aircraft during the GOES-R Validation Flight Campaign. Optical signatures of lightning were observed during a variety of thunderstorm scenarios while coincident measurements were obtained by GLM and ground based antennae networks. This presentation will describe the preliminary analysis of the FEGS dataset in the context of GLM validation.

The Problem of Size in Robust Design

NASA Technical Reports Server (NTRS)

Koch, Patrick N.; Allen, Janet K.; Mistree, Farrokh; Mavris, Dimitri

1997-01-01

To facilitate the effective solution of multidisciplinary, multiobjective complex design problems, a departure from the traditional parametric design analysis and single objective optimization approaches is necessary in the preliminary stages of design. A necessary tradeoff becomes one of efficiency vs. accuracy as approximate models are sought to allow fast analysis and effective exploration of a preliminary design space. In this paper we apply a general robust design approach for efficient and comprehensive preliminary design to a large complex system: a high speed civil transport (HSCT) aircraft. Specifically, we investigate the HSCT wing configuration design, incorporating life cycle economic uncertainties to identify economically robust solutions. The approach is built on the foundation of statistical experimentation and modeling techniques and robust design principles, and is specialized through incorporation of the compromise Decision Support Problem for multiobjective design. For large problems however, as in the HSCT example, this robust design approach developed for efficient and comprehensive design breaks down with the problem of size - combinatorial explosion in experimentation and model building with number of variables -and both efficiency and accuracy are sacrificed. Our focus in this paper is on identifying and discussing the implications and open issues associated with the problem of size for the preliminary design of large complex systems.

Preliminary LOCA analysis of the westinghouse small modular reactor using the WCOBRA/TRAC-TF2 thermal-hydraulics code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liao, J.; Kucukboyaci, V. N.; Nguyen, L.

2012-07-01

The Westinghouse Small Modular Reactor (SMR) is an 800 MWt (> 225 MWe) integral pressurized water reactor (iPWR) with all primary components, including the steam generator and the pressurizer located inside the reactor vessel. The reactor core is based on a partial-height 17x17 fuel assembly design used in the AP1000{sup R} reactor core. The Westinghouse SMR utilizes passive safety systems and proven components from the AP1000 plant design with a compact containment that houses the integral reactor vessel and the passive safety systems. A preliminary loss of coolant accident (LOCA) analysis of the Westinghouse SMR has been performed using themore » WCOBRA/TRAC-TF2 code, simulating a transient caused by a double ended guillotine (DEG) break in the direct vessel injection (DVI) line. WCOBRA/TRAC-TF2 is a new generation Westinghouse LOCA thermal-hydraulics code evolving from the US NRC licensed WCOBRA/TRAC code. It is designed to simulate PWR LOCA events from the smallest break size to the largest break size (DEG cold leg). A significant number of fluid dynamics models and heat transfer models were developed or improved in WCOBRA/TRAC-TF2. A large number of separate effects and integral effects tests were performed for a rigorous code assessment and validation. WCOBRA/TRAC-TF2 was introduced into the Westinghouse SMR design phase to assist a quick and robust passive cooling system design and to identify thermal-hydraulic phenomena for the development of the SMR Phenomena Identification Ranking Table (PIRT). The LOCA analysis of the Westinghouse SMR demonstrates that the DEG DVI break LOCA is mitigated by the injection and venting from the Westinghouse SMR passive safety systems without core heat up, achieving long term core cooling. (authors)« less

An automatic tooth preparation technique: A preliminary study

NASA Astrophysics Data System (ADS)

Yuan, Fusong; Wang, Yong; Zhang, Yaopeng; Sun, Yuchun; Wang, Dangxiao; Lyu, Peijun

2016-04-01

The aim of this study is to validate the feasibility and accuracy of a new automatic tooth preparation technique in dental healthcare. An automatic tooth preparation robotic device with three-dimensional motion planning software was developed, which controlled an ultra-short pulse laser (USPL) beam (wavelength 1,064 nm, pulse width 15 ps, output power 30 W, and repeat frequency rate 100 kHz) to complete the tooth preparation process. A total of 15 freshly extracted human intact first molars were collected and fixed into a phantom head, and the target preparation shapes of these molars were designed using customised computer-aided design (CAD) software. The accuracy of tooth preparation was evaluated using the Geomagic Studio and Imageware software, and the preparing time of each tooth was recorded. Compared with the target preparation shape, the average shape error of the 15 prepared molars was 0.05-0.17 mm, the preparation depth error of the occlusal surface was approximately 0.097 mm, and the error of the convergence angle was approximately 1.0°. The average preparation time was 17 minutes. These results validated the accuracy and feasibility of the automatic tooth preparation technique.

An automatic tooth preparation technique: A preliminary study.

PubMed

Yuan, Fusong; Wang, Yong; Zhang, Yaopeng; Sun, Yuchun; Wang, Dangxiao; Lyu, Peijun

2016-04-29

The aim of this study is to validate the feasibility and accuracy of a new automatic tooth preparation technique in dental healthcare. An automatic tooth preparation robotic device with three-dimensional motion planning software was developed, which controlled an ultra-short pulse laser (USPL) beam (wavelength 1,064 nm, pulse width 15 ps, output power 30 W, and repeat frequency rate 100 kHz) to complete the tooth preparation process. A total of 15 freshly extracted human intact first molars were collected and fixed into a phantom head, and the target preparation shapes of these molars were designed using customised computer-aided design (CAD) software. The accuracy of tooth preparation was evaluated using the Geomagic Studio and Imageware software, and the preparing time of each tooth was recorded. Compared with the target preparation shape, the average shape error of the 15 prepared molars was 0.05-0.17 mm, the preparation depth error of the occlusal surface was approximately 0.097 mm, and the error of the convergence angle was approximately 1.0°. The average preparation time was 17 minutes. These results validated the accuracy and feasibility of the automatic tooth preparation technique.

Differences in MMPI-2 FBS and RBS scores in brain injury, probable malingering, and conversion disorder groups: a preliminary study.

PubMed

Peck, C P; Schroeder, R W; Heinrichs, R J; Vondran, E J; Brockman, C J; Webster, B K; Baade, L E

2013-01-01

This study examined differences in raw scores on the Symptom Validity Scale and Response Bias Scale (RBS) from the Minnesota Multiphasic Personality Inventory-2 in three criterion groups: (i) valid traumatic brain injured, (ii) invalid traumatic brain injured, and (iii) psychogenic non-epileptic seizure disorders. Results indicate that a >30 raw score cutoff for the Symptom Validity Scale accurately identified 50% of the invalid traumatic brain injured group, while misclassifying none of the valid traumatic brain injured group and 6% of the psychogenic non-epileptic seizure disorder group. Using a >15 RBS raw cutoff score accurately classified 50% of the invalid traumatic brain injured group and misclassified fewer than 10% of the valid traumatic brain injured and psychogenic non-epileptic seizure disorder groups. These cutoff scores used conjunctively did not misclassify any members of the psychogenic non-epileptic seizure disorder or valid traumatic brain injured groups, while accurately classifying 44% of the invalid traumatic brain injured individuals. Findings from this preliminary study suggest that the conjunctive use of the Symptom Validity Scale and the RBS from the Minnesota Multiphasic Personality Inventory-2 may be useful in differentiating probable malingering from individuals with brain injuries and conversion disorders.

Study of Geometric Porosity on Static Stability and Drag Using Computational Fluid Dynamics for Rigid Parachute Shapes

NASA Technical Reports Server (NTRS)

Greathouse, James S.; Schwing, Alan M.

2015-01-01

This paper explores use of computational fluid dynamics to study the e?ect of geometric porosity on static stability and drag for NASA's Multi-Purpose Crew Vehicle main parachute. Both of these aerodynamic characteristics are of interest to in parachute design, and computational methods promise designers the ability to perform detailed parametric studies and other design iterations with a level of control previously unobtainable using ground or flight testing. The approach presented here uses a canopy structural analysis code to define the inflated parachute shapes on which structured computational grids are generated. These grids are used by the computational fluid dynamics code OVERFLOW and are modeled as rigid, impermeable bodies for this analysis. Comparisons to Apollo drop test data is shown as preliminary validation of the technique. Results include several parametric sweeps through design variables in order to better understand the trade between static stability and drag. Finally, designs that maximize static stability with a minimal loss in drag are suggested for further study in subscale ground and flight testing.

Long-duration heat load measurement approach by novel apparatus design and highly efficient algorithm

NASA Astrophysics Data System (ADS)

Zhu, Yanwei; Yi, Fajun; Meng, Songhe; Zhuo, Lijun; Pan, Weizhen

2017-11-01

Improving the surface heat load measurement technique for vehicles in aerodynamic heating environments is imperative, regarding aspects of both the apparatus design and identification efficiency. A simple novel apparatus is designed for heat load identification, taking into account the lessons learned from several aerodynamic heating measurement devices. An inverse finite difference scheme (invFDM) for the apparatus is studied to identify its surface heat flux from the interior temperature measurements with high efficiency. A weighted piecewise regression filter is also proposed for temperature measurement prefiltering. Preliminary verification of the invFDM scheme and the filter is accomplished via numerical simulation experiments. Three specific pieces of apparatus have been concretely designed and fabricated using different sensing materials. The aerodynamic heating process is simulated by an inductively coupled plasma wind tunnel facility. The identification of surface temperature and heat flux from the temperature measurements is performed by invFDM. The results validate the high efficiency, reliability and feasibility of heat load measurements with different heat flux levels utilizing the designed apparatus and proposed method.

The development and evaluation of content validity of the Zambia Spina Bifida Functional Measure: Preliminary studies

PubMed Central

Amosun, Seyi L.; Shilalukey-Ngoma, Mary P.; Kafaar, Zuhayr

2017-01-01

Background Very little is known on outcome measures for children with spina bifida (SB) in Zambia. If rehabilitation professionals managing children with SB in Zambia and other parts of sub-Saharan Africa are to instigate measuring outcomes routinely, a tool has to be made available. The main objective of this study was to develop an appropriate and culturally sensitive instrument for evaluating the impact of the interventions on children with SB in Zambia. Methods A mixed design method was used for the study. Domains were identified retrospectively and confirmation was done through a systematic review study. Items were generated through semi-structured interviews and focus group discussions. Qualitative data were downloaded, translated into English, transcribed verbatim and presented. These were then placed into categories of the main domains of care deductively through the process of manifest content analysis. Descriptive statistics, alpha coefficient and index of content validity were calculated using SPSS. Results Self-care, mobility and social function were identified as main domains, while participation and communication were sub-domains. A total of 100 statements were generated and 78 items were selected deductively. An alpha coefficient of 0.98 was computed and experts judged the items. Conclusions The new functional measure with an acceptable level of content validity titled Zambia Spina Bifida Functional Measure (ZSBFM) was developed. It was designed to evaluate effectiveness of interventions given to children with SB from the age of 6 months to 5 years. Psychometric properties of reliability and construct validity were tested and are reported in another study. PMID:28951850

The development and psychometric testing of a theory-based instrument to evaluate nurses' perception of clinical reasoning competence.

PubMed

Liou, Shwu-Ru; Liu, Hsiu-Chen; Tsai, Hsiu-Min; Tsai, Ying-Huang; Lin, Yu-Ching; Chang, Chia-Hao; Cheng, Ching-Yu

2016-03-01

The purpose of the study was to develop and psychometrically test the Nurses Clinical Reasoning Scale. Clinical reasoning is an essential skill for providing safe and quality patient care. Identifying pre-graduates' and nurses' needs and designing training courses to improve their clinical reasoning competence becomes a critical task. However, there is no instrument focusing on clinical reasoning in the nursing profession. Cross-sectional design was used. This study included the development of the scale, a pilot study that preliminary tested the readability and reliability of the developed scale and a main study that implemented and tested the psychometric properties of the developed scale. The Nurses Clinical Reasoning Scale was developed based on the Clinical Reasoning Model. The scale includes 15 items using a Likert five-point scale. Data were collected from 2013-2014. Two hundred and fifty-one participants comprising clinical nurses and nursing pre-graduates completed and returned the questionnaires in the main study. The instrument was tested for internal consistency and test-retest reliability. Its validity was tested with content, construct and known-groups validity. One factor emerged from the factor analysis. The known-groups validity was confirmed. The Cronbach's alpha for the entire instrument was 0·9. The reliability and validity of the Nurses Clinical Reasoning Scale were supported. The scale is a useful tool and can be easily administered for the self-assessment of clinical reasoning competence of clinical nurses and future baccalaureate nursing graduates. Study limitations and further recommendations are discussed. © 2015 John Wiley & Sons Ltd.

Development and Psychometric Evaluation of the Reasons for Living—Older Adults Scale: A Suicide Risk Assessment Inventory

PubMed Central

Edelstein, Barry A.; Heisel, Marnin J.; McKee, Deborah R.; Martin, Ronald R.; Koven, Lesley P.; Duberstein, Paul R.; Britton, Peter C.

2009-01-01

Purpose: The purposes of these studies were to develop and initially evaluate the psychometric properties of the Reasons for Living Scale—Older Adult version (RFL-OA), an older adults version of a measure designed to assess reasons for living among individuals at risk for suicide. Design and Methods: Two studies are reported. Study 1 involved instrument development with 106 community-dwelling older adults, and initial psychometric evaluation with a second sample of 119 community-dwelling older adults. Study 2 evaluated the psychometric properties of the RFL-OA in a clinical sample. One hundred eighty-one mental health patients 50 years or older completed the RFL-OA and measures of depression, suicide ideation at the current time and at the worst point in one's life, and current mental status and physical functioning. Results: Strong psychometric properties were demonstrated for the RFL-OA, with high internal consistency (Cronbach's alpha coefficient). Convergent validity was evidenced by negative associations among RFL-OA scores and measures of depression and suicide ideation. RFL-OA scores predicted current and worst-episode suicide ideation above and beyond current depression. Discriminant validity was evidenced with measures of current mental status and physical functioning. Criterion-related validity was also demonstrated with respect to lifetime history of suicidal behavior. Implications: These findings provide preliminary support for the validity and reliability of the RFL-OA. The findings also support the potential value of attending to reasons for living during clinical treatment with depressed older adults and others at risk for suicide. PMID:19546114

Preliminary Reliability and Validity of the Clinician-Administered PTSD Scale for Schizophrenia

ERIC Educational Resources Information Center

Gearon, Jean S.; Bellack, Alan S.; Tenhula, Wendy N.

2004-01-01

This study provides preliminary psychometric support for a version of the Clinician-Administered Posttraumatic Stress Disorder (PTSD) Scale (CAPS; D. D. Blake et al., 1990) adapted for use with patients with schizophrenia (CAPS-S; J. S. Gearon. S. Thomas-Lohrman, & A. S. Bellack, 2001). Nineteen women with schizophrenia and co-occurring illicit…

An Approach to Improved Credibility of CFD Simulations for Rocket Injector Design

NASA Technical Reports Server (NTRS)

Tucker, Paul K.; Menon, Suresh; Merkle, Charles L.; Oefelein, Joseph C.; Yang, Vigor

2007-01-01

Computational fluid dynamics (CFD) has the potential to improve the historical rocket injector design process by simulating the sensitivity of performance and injector-driven thermal environments to. the details of the injector geometry and key operational parameters. Methodical verification and validation efforts on a range of coaxial injector elements have shown the current production CFD capability must be improved in order to quantitatively impact the injector design process.. This paper documents the status of an effort to understand and compare the predictive capabilities and resource requirements of a range of CFD methodologies on a set of model problem injectors. Preliminary results from a steady Reynolds-Average Navier-Stokes (RANS), an unsteady Reynolds-Average Navier Stokes (URANS) and three different Large Eddy Simulation (LES) techniques used to model a single element coaxial injector using gaseous oxygen and gaseous hydrogen propellants are presented. Initial observations are made comparing instantaneous results, corresponding time-averaged and steady-state solutions in the near -injector flow field. Significant differences in the flow fields exist, as expected, and are discussed. An important preliminary result is the identification of a fundamental mixing mechanism, accounted for by URANS and LES, but missing in the steady BANS methodology. Since propellant mixing is the core injector function, this mixing process may prove to have a profound effect on the ability to more correctly simulate injector performance and resulting thermal environments. Issues important to unifying the basis for future comparison such as solution initialization, required run time and grid resolution are addressed.

Development and test of a cryogenic trap system dedicated to confinement of radioactive volatile isotopes in SPIRAL2 post-accelerator

NASA Astrophysics Data System (ADS)

Souli, M.; Dolégiéviez, P.; Fadil, M.; Gallardo, P.; Levallois, R.; Munoz, H.; Ozille, M.; Rouillé, G.; Galet, F.

2011-12-01

A cryogenic trap system called Cryotrap has been studied and developed in the framework of nuclear safety studies for SPIRAL2 accelerator. The main objective of Cryotrap is to confine and reduce strongly the migration of radioactive volatile isotopes in beam lines. These radioactive gases are produced after interaction between a deuteron beam and a fissile target. Mainly, Cryotrap is composed by a vacuum vessel and two copper thermal screens maintained separately at two temperatures T1=80 K and T2=20 K. A Cryocooler with two stages at previous temperatures is used to remove static heat losses of the cryostat and ensure an efficient cooling of the system. Due to strong radiological constraints that surround Cryotrap, the coupling system between Cryocooler and thermal screens is based on aluminum thermo-mechanical contraction. The main objective of this original design is to limit direct human maintenance interventions and provide maximum automated operations. A preliminary prototype of Cryotrap has been developed and tested at GANIL laboratory to validate its design, and determine its thermal performance and trapping efficiency. In this paper, we will first introduce briefly SPIRAL2 project and discuss the main role of Cryotrap in nuclear safety of the accelerator. Then, we will describe the proposed conceptual design of Cryotrap and its main characteristics. After that, we will focus on test experiment and analyze experimental data. Finally, we will present preliminary results of gas trapping efficiency tests.

Low-cost point-focus solar concentrator, phase 1

NASA Technical Reports Server (NTRS)

Nelson, E. V.; Derbidge, T. C.; Erskine, D.; Maraschin, R. A.; Niemeyer, W. A.; Matsushita, M. J.; Overly, P. T.

1979-01-01

The results of the preliminary design study for the low cost point focus solar concentrator (LCPFSC) development program are presented. A summary description of the preliminary design is given. The design philosophy used to achieve a cost effective design for mass production is described. The concentrator meets all design requirements specified and is based on practical design solutions in every possible way.

Preliminary design activities for solar heating and cooling systems

NASA Technical Reports Server (NTRS)

1978-01-01

Information on the development of solar heating and cooling systems is presented. The major emphasis is placed on program organization, system size definition, site identification, system approaches, heat pump and equipment design, collector procurement, and other preliminary design activities.

Development and Preliminary Validation of the Strategic Thinking Mindset Test (STMT)

DTIC Science & Technology

2017-06-01

reliability. The test’s three subscales (intellectual flexibility, inclusiveness, and humility) each correlated significantly with alternative measures of...34 TABLE 9. STAGE 4 SAMPLE DEMOGRAPHICS ................................................................ 35 TABLE 10. INTERITEM CORRELATION ...MATRIX (ALL ITEMS) ...................................... 39 TABLE 11. ITEM-SCALE AND VALIDITY CORRELATIONS (ALL ITEMS) .................... 40

Validity and Utility of the Parent--Teacher Relationship Scale-II

ERIC Educational Resources Information Center

Dawson, Anne E.; Wymbs, Brian T.

2016-01-01

Preliminary findings indicate that positive relations between parents and teachers are associated with successful school outcomes for children. However, measures available to assess parent-teacher relations are scant. The current study examined validity evidence for the Parent-Teacher Relationship Scale-I (PTRS). Specifically, the internal…

Attitudes toward Anger Management Scale: Development and Initial Validation

ERIC Educational Resources Information Center

Boudreaux, David J.; Dahlen, Eric R.; Madson, Michael B.; Bullock-Yowell, Emily

2014-01-01

This article describes the development and preliminary validation of the Attitudes Toward Anger Management Scale (ATAMS), a self-report measure of attitudes toward anger management services. Undergraduate volunteers ("N" = 415) completed an initial version of the instrument. Principal components analysis yielded a two-factor solution.…

The Subjective Sexual Arousal Scale for Men (SSASM): preliminary development and psychometric validation of a multidimensional measure of subjective male sexual arousal.

PubMed

Althof, Stanley E; Perelman, Michael A; Rosen, Raymond C

2011-08-01

Sexual arousal is a multifaceted process that involves both mental and physical components. No instrument has been developed and validated to assess subjective aspects of male sexual arousal. To develop and psychometrically validate a self-administered scale for assessing subjective male sexual arousal. Using recommendations of the Food and Drug Administration (FDA) guidance on patient-reported outcome instruments, important aspects of male sexual arousal were identified via qualitative research (focus groups and interviews) of U.S. men with erectile dysfunction (ED) and healthy controls. After a preliminary questionnaire was developed by a panel of experts, a quantitative study of men with ED and controls was conducted to psychometrically validate the Subjective Sexual Arousal Scale for Men (SSASM). To develop a male sexual arousal scale and determine its factor structure, reliability, and construct validity. Five aspects of male sexual arousal were identified from the qualitative focus groups and cognitive interviews. Men's preferred language for describing sexual arousal and preferred response formats were incorporated into the questions. Factor analysis of data from the quantitative study of 304 men aged 21 to 70 years identified five domains with eigenvalues >1: sexual performance (six items), mental satisfaction (five items), sexual assertiveness (three items), partner communication (three items), and partner relationship (three items). The five domains had a high degree of internal consistency (Cronbach's alpha values 0.88-0.94). Test-retest reliability over a 2- to 4-week period was high-moderately high (r values 0.75-0.88) for the five domain scores. Correlations between SSASM domain scores and standardized scale scores for social desirability, general health, life satisfaction, and sexual function demonstrated the construct validity of the scale. Preliminary validation data suggest that the 20-item SSASM scale may be useful as a multidimensional, reliable, self-administered instrument for assessing subjective sexual arousal in men of different ages. © 2011 International Society for Sexual Medicine.

Development and Validation of a Fatigue Assessment Scale for U.S. Construction Workers

PubMed Central

Zhang, Mingzong; Sparer, Emily H.; Murphy, Lauren A.; Dennerlein, Jack T.; Fang, Dongping; Katz, Jeffrey N.; Caban-Martinez, Alberto J.

2015-01-01

Objective To develop a fatigue assessment scale and test its reliability and validity for commercial construction workers. Methods Using a two-phased approach, we first identified items for the development of a Fatigue Assessment Scale for Construction Workers (FASCW) through review of existing scales in the scientific literature, key informant interviews (n=11) and focus groups (3 groups with 6 workers each) with construction workers. The second phase included assessment for the reliability, validity and sensitivity of the new scale using a repeated-measures study design with a convenience sample of construction workers (n=144). Results Phase one resulted in a 16-item preliminary scale that after factor analysis yielded a final 10-item scale with two sub-scales (“Lethargy” and “Bodily Ailment”).. During phase two, the FASCW and its subscales demonstrated satisfactory internal consistency (alpha coefficients were FASCW (0.91), Lethargy (0.86) and Bodily Ailment (0.84)) and acceptable test-retest reliability (Pearson Correlations Coefficients: 0.59–0.68; Intraclass Correlation Coefficients: 0.74–0.80). Correlation analysis substantiated concurrent and convergent validity. A discriminant analysis demonstrated that the FASCW differentiated between groups with arthritis status and different work hours. Conclusions The 10-item FASCW with good reliability and validity is an effective tool for assessing the severity of fatigue among construction workers. PMID:25603944

Preliminary design package for solar collector and solar pump

NASA Technical Reports Server (NTRS)

1978-01-01

A solar-operated pump using an existing solar collector, for use on solar heating and cooling and hot water systems is described. Preliminary design criteria of the collector and solar-powered pump is given including: design drawings, verification plans, and hazard analysis.

Preliminary design considerations for 10 to 40 meter-diameter precision truss reflectors

NASA Technical Reports Server (NTRS)

Mikulas, Martin M., Jr.; Collins, Timothy J.; Hedgepeth, John M.

1990-01-01

A simplified preliminary design capability for erectable precision segmented reflectors is presented. This design capability permits a rapid assessment of a wide range of reflector parameters as well as new structural concepts and materials. The preliminary design approach was applied to a range of precision reflectors from 10 meters to 100 meters in diameter while considering standard design drivers. The design drivers considered were: weight, fundamental frequency, launch packaging volume, part count, and on-orbit assembly time. For the range of parameters considered, on-orbit assembly time was identified as the major design driver. A family of modular panels is introduced which can significantly reduce the number of reflector parts and the on-orbit assembly time.

OPDOT: A computer program for the optimum preliminary design of a transport airplane

NASA Technical Reports Server (NTRS)

Sliwa, S. M.; Arbuckle, P. D.

1980-01-01

A description of a computer program, OPDOT, for the optimal preliminary design of transport aircraft is given. OPDOT utilizes constrained parameter optimization to minimize a performance index (e.g., direct operating cost per block hour) while satisfying operating constraints. The approach in OPDOT uses geometric descriptors as independent design variables. The independent design variables are systematically iterated to find the optimum design. The technical development of the program is provided and a program listing with sample input and output are utilized to illustrate its use in preliminary design. It is not meant to be a user's guide, but rather a description of a useful design tool developed for studying the application of new technologies to transport airplanes.

High-potential Working Fluids for Next Generation Binary Cycle Geothermal Power Plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zia, Jalal; Sevincer, Edip; Chen, Huijuan

2013-06-29

A thermo-economic model has been built and validated for prediction of project economics of Enhanced Geothermal Projects. The thermo-economic model calculates and iteratively optimizes the LCOE (levelized cost of electricity) for a prospective EGS (Enhanced Geothermal) site. It takes into account the local subsurface temperature gradient, the cost of drilling and reservoir creation, stimulation and power plant configuration. It calculates and optimizes the power plant configuration vs. well depth. Thus outputs from the model include optimal well depth and power plant configuration for the lowest LCOE. The main focus of this final report was to experimentally validate the thermodynamic propertiesmore » that formed the basis of the thermo-economic model built in Phase 2, and thus build confidence that the predictions of the model could be used reliably for process downselection and preliminary design at a given set of geothermal (and/or waste heat) boundary conditions. The fluid and cycle downselected was based on a new proprietary fluid from a vendor in a supercritical ORC cycle at a resource condition of 200°C inlet temperature. The team devised and executed a series of experiments to prove the suitability of the new fluid in realistic ORC cycle conditions. Furthermore, the team performed a preliminary design study for a MW-scale turbo expander that would be used for a supercritical ORC cycle with this new fluid. The following summarizes the main findings in the investigative campaign that was undertaken: 1. Chemical compatibility of the new fluid with common seal/gasket/Oring materials was found to be problematic. Neoprene, Viton, and silicone materials were found to be incompatible, suffering chemical decomposition, swelling and/or compression set issues. Of the materials tested, only TEFLON was found to be compatible under actual ORC temperature and pressure conditions. 2. Thermal stability of the new fluid at 200°C and 40 bar was found to be acceptable after 399 hours of exposure?only 3% of the initial charge degraded into by products. The main degradation products being an isomer and a dimer. 3. In a comparative experiment between R245fa and the new fluid under subcritical conditions, it was found that the new fluid operated at 1 bar lower than R245fa for the same power output, which was also predicted in the Aspen HSYSY model. As a drop-in replacement fluid for R245fa, this new fluid was found to be at least as good as R245fa in terms of performance and stability. Further optimization of the subcritical cycle may lead to a significant improvement in performance for the new fluid. 4. For supercritical conditions, the experiment found a good match between the measured and model predicted state point property data and duties from the energy balance. The largest percent differences occurred with densities and evaporator duty (see Figure 78). It is therefore reasonable to conclude that the state point model was experimentally validated with a realistic ORC system. 5. The team also undertook a preliminary turbo-expander design study for a supercritical ORC cycle with the new working fluid. Variants of radial and axial turbo expander geometries went through preliminary design and rough costing. It was found that at 15MWe or higher power rating, a multi-stage axial turbine is most suitable providing the best performance and cost. However, at lower power ratings in the 5MWe range, the expander technology to be chosen depends on the application of the power block. For EGS power blocks, it is most optimal to use multi-stage axial machines. In conclusion, the predictions of the LCOE model that showed a supercritical cycle based on the new fluid to be most advantageous for geothermal power production at a resource temperature of ~ 200C have been experimentally validated. It was found that the cycle based on the new fluid is lower in LCOE and higher in net power output (for the same boundary conditions). The project, therefore has found a new optimal configuration for low temperature geothermal power production in the form of a supercritical ORC cycle based on a new vendor fluid.« less

Development and evaluation of the Motivation to Limit Screen-time Questionnaire (MLSQ) for adolescents.

PubMed

Lubans, D R; Lonsdale, C; Plotnikoff, R C; Smith, J; Dally, K; Morgan, P J

2013-11-01

The aim of this study was to design and evaluate a brief scale to assess adolescents' motivation to limit their screen-time using a self-determination theory (SDT) framework. The development and evaluation of the Motivation to Limit Screen-time Questionnaire (MLSQ) involved three phases. In Phase 1, experts in SDT were asked to review the content validity of the MLSQ items. In Phase 2, adolescent boys (N=342, mean age=12.7 ±.5 years) completed the MLSQ and the factorial validity of the model was explored. In Phase 3, adolescent boys (N=48, mean age=14.3 ± 1.3 years) completed the MLSQ on two occasions separated by 1-week. Phases 2 and 3 were conducted in New South Wales, Australia in 2012. Twenty four SDT experts reviewed the original scale items. Validity coefficients associated with six of the original eight items exceeded the threshold value (V>.68, p<.01). In Phase 2, the revised three-factor (9-items) model provided a good fit to the data (SRMR=.07, CFI=.96). The intraclass correlation (ICC) values were .67 for amotivation and .70 and .82 for controlled and autonomous motivation, respectively. This study has provided preliminary evidence for the validity and reliability of the MLSQ in adolescent boys. © 2013.

Creation and preliminary validation of the screening for self-medication safety post-stroke scale (S-5).

PubMed

Kaizer, Franceen; Kim, Angela; Van, My Tram; Korner-Bitensky, Nicol

2010-03-01

Patients with stroke should be screened for safety prior to starting a self-medication regime. An extensive literature review revealed no standardized self-medication tool tailored to the multi-faceted needs of the stroke population. The aim of this study was to create and validate a condition-specific tool to be used in screening for self-medication safety in individuals with stroke. Items were generated using expert consultation and review of the existing tools. The draft tool was pilot-tested on expert stroke clinicians to receive feedback on content, clarity, optimal cueing and domain omissions. The final version was piloted on patients with stroke using a structured interviewer-administered interview. The tool was progressively refined and validated according to feedback from the 11 expert reviewers. The subsequent version was piloted on patients with stroke. The final version includes 16 questions designed to elicit information on 5 domains: cognition, communication, motor, visual-perception and, judgement/executive function/self-efficacy. The Screening for Safe Self-medication post-Stroke Scale (S-5) has been created and validated for use by health professionals to screen self-medication safety readiness of patients after stroke. Its use should also help to guide clinicians' recommendations and interventions aimed at enhancing self-medication post-stroke.

Glasses-type wearable computer displays: usability considerations examined with a 3D glasses case study.

PubMed

Chang, Joonho; Moon, Seung Ki; Jung, Kihyo; Kim, Wonmo; Parkinson, Matthew; Freivalds, Andris; Simpson, Timothy W; Baik, Seon Pill

2018-05-01

This study presents usability considerations and solutions for the design of glasses-type wearable computer displays and examines their effectiveness in a case study. Design countermeasures were investigated by a four-step design process: (1) preliminary design analysis; (2) design idea generation; (3) final design selection; and (4) virtual fitting trial. Three design interventions were devised from the design process: (1) weight balance to reduce pressure concentrated on the nose, (2) compliant temples to accommodate diverse head sizes and (3) a hanger mechanism to help spectacle users hang their wearable display on their eye glasses. To investigate their effectiveness, in the case study, the novel 3D glasses adopting the three interventions were compared with two existing 3D glasses in terms of neck muscle fatigue and subjective discomfort rating. While neck muscle fatigue was not significantly different among the three glasses (p = 0.467), the novel glasses had significantly smaller discomfort ratings (p = 0.009). Relevance to Industry: A four-step design process identified usability considerations and solutions for the design of glasses-type wearable computer displays. A novel 3D glasses was proposed through the process and its effectiveness was validated. The results identify design considerations and opportunities relevant to the emerging wearable display industry.

Preliminary design of a supersonic cruise aircraft high-pressure turbine

NASA Technical Reports Server (NTRS)

Aceto, L. D.; Calderbank, J. C.

1983-01-01

Development of the supersonic cruise aircraft engine continued in this National Aeronautics and Space Administration (NASA) sponsored Pratt and Whitney program for the Preliminary Design of an Advanced High-Pressure Turbine. Airfoil cooling concepts and the technology required to implement these concepts received particular emphasis. Previous supersonic cruise aircraft mission studies were reviewed and the Variable Stream Control Engine (VSCE) was chosen as the candidate or the preliminary turbine design. The design was evaluated for the supersonic cruise mission. The advanced technology to be generated from these designs showed benefits in the supersonic cruise application and subsonic cruise application. The preliminary design incorporates advanced single crystal materials, thermal barrier coatings, and oxidation resistant coatings for both the vane and blade. The 1990 technology vane and blade designs have cooled turbine efficiency of 92.3 percent, 8.05 percent Wae cooling and a 10,000 hour life. An alternate design with 1986 technology has 91.9 percent efficiency and 12.43 percent Wae cooling at the same life. To achieve these performance and life results, technology programs must be pursued to provide the 1990's technology assumed for this study.

Application of an experimental design for the optimization and validation of a new HPLC method for the determination of vancomycin in an extemporaneous ophthalmic solution.

PubMed

Enrique, Montse; García-Montoya, Encarna; Miñarro, Montserrat; Orriols, Anna; Ticó, Joseph Ramon; Suñé-Negre, Joseph Maria; Pérez-Lozano, Pilar

2008-10-01

An experimental design has been used to develop and optimize a new high-performance liquid chromatographic (HPLC) method for the determination of Vancomycin in an extemporaneous ophthalmic solution. After the preliminary studies and literature review, the optimized method was carried out on a second generation of a C18 reverse-phase column (Luna 150 x 4.6 mm i.d., 5 microm particle size) and using methanol as organic phase, a less toxic solvent than acetonitrile, described in the extended literature. The experimental design consisted of a Placket-Burman design where six different variables were studied (flow rate, mL/min; temperature, degrees C; pH mobile phase; % buffer solution; wavelength; and injection volume) to obtain the best suitability parameters (Capacity factor-K', tailing factor, resolution, and theoretical plates). After the optimization of the chromatographic conditions and statistical treatment of the obtained results, the final method uses a mixture of a buffer solution of water-phosphoric acid (85%) (99.83:0.17, v/v) adjusted to pH 3.0 using triethylamine and mixed with methanol (87:13, v/v). The separation is achieved using a flow rate of 1.0 mL/min at 35 degrees C. The UV detector was operated at 280 nm. The validation study carried out, demonstrates the viability of the method, obtaining a good selectivity, linearity, precision, accuracy, and sensitivity.

Development of Chemistry Triangle Oriented Module on Topic of Reaction Rate for Senior High School Level Grade XI Chemistry Learning.

NASA Astrophysics Data System (ADS)

Sari, D. R.; Hardeli; Bayharti

2018-04-01

This study aims to produce chemistry triangle oriented module on topic of reaction rate, and to reveal the validity and practicality level of the generated module. The type of research used is EducationalDesign Research (EDR) with development model is Plompmodel. This model consists of three phases, which are preliminary research, prototyping phase, and assessment phase. The instrument used in this research is questionnaire validity and practicality. The data of the research were analyzed by using Kappa Cohen formula. The chemistry triangle oriented module validation sheet was given to 5 validators consisting of 3 chemistry lecturers and 2 high school chemistry teachers, while the practicality sheet was given to 2 chemistry teachers, 6 students of SMAN 10 Padang grade XII MIA 5 on the small groupevaluation and 25 students of SMAN 10 Padang grade XII MIA 6 on the field test. Based on the questionnaire validity analysis, the validity level of the module is very high with the value of kappa moment 0.87. The level of practicality based on teacher questionnaire response is very high category with a kappa moment value 0.96. Based on the questionnaire of student responses on small group evaluation, the level of practicality is very high category with a kappa moment 0.81, and the practicality is very high category with kappa moment value 0.83 based on questionnaire of student response on field test.

RICH Economic Games for Networked Relationships and Communities: Development and Preliminary Validation in Yasawa, Fiji

ERIC Educational Resources Information Center

Gervais, Matthew M.

2017-01-01

Experimental economic games reveal significant population variation in human social behavior. However, most protocols involve anonymous recipients, limiting their validity to fleeting interactions. Understanding human relationship dynamics will require methods with the virtues of economic games that also tap recipient identity-conditioned…

Concurrent Validity of the Classroom Strategies Scale-Teacher Form: A Preliminary Investigation

ERIC Educational Resources Information Center

Reddy, Linda A.; Dudek, Christopher M.; Rualo, Angelique J.; Fabiano, Gregory A.

2016-01-01

The present study investigated the concurrent validity of the Classroom Strategies Scale-Teacher Form (CSS-T), a multidimensional teacher formative assessment of instructional and behavioral management practices. The CSS-T is compared with the Classroom Assessment Scoring System (CLASS), a well-known teacher assessment of overall classroom…

The Bull's-Eye Values Survey: A Psychometric Evaluation

ERIC Educational Resources Information Center

Lundgren, Tobias; Luoma, Jason B.; Dahl, JoAnne; Strosahl, Kirk; Melin, Lennart

2012-01-01

Two studies were conducted to develop and evaluate an instrument intended to identify and measure personal values, values attainment, and persistence in the face of barriers. Study 1 describes a content validity approach to the construction and preliminary validation of the Bull's Eye Values Survey (BEVS), using a sample of institutionalized…

Development and Validation of the Pediatric Oncology Quality of Life Scale.

ERIC Educational Resources Information Center

Goodwin, David A. J.; And Others

1994-01-01

Development of a parent report measure for assessing the quality of life of children with cancer is described. The Pediatric Oncology Quality of Life Scale assesses physical function and role restriction, emotional distress, and reaction to current medical treatment. Reliability and validity assessments provide preliminary support for the…

Development and Validation of a Test for Bulimia.

ERIC Educational Resources Information Center

Smith, Marcia C.; Thelen, Mark H.

1984-01-01

Developed the Bulimia Test (BULIT) based on responses of clinically identified females (N=18) and normal female college students (N=119) to preliminary test items. Results showed that the BULIT provided an objective, reliable, and valid measure by which to identify individuals with symptoms of bulimia. (Instrument is appended.) (LLL)

Modular space station phase B extension, preliminary system design. Volume 4: Subsystems analyses

NASA Technical Reports Server (NTRS)

Antell, R. W.

1972-01-01

The subsystems tradeoffs, analyses, and preliminary design results are summarized. Analyses were made of the structural and mechanical, environmental control and life support, electrical power, guidance and control, reaction control, information, and crew habitability subsystems. For each subsystem a summary description is presented including subsystem requirements, subsystem description, and subsystem characteristics definition (physical, performance, and interface). The major preliminary design data and tradeoffs or analyses are described in detail at each of the assembly levels.

The "La Caixa" Foundation and WHO Collaborating Center Spanish National Program for enhancing psychosocial and spiritual palliative care for patients with advanced diseases, and their families: preliminary findings.

PubMed

Gómez-Batiste, Xavier; Buisan, Montse; González, M Pau; Velasco, David; de Pascual, Verónica; Espinosa, Jose; Novellas, Anna; Martínez-Muñoz, Marisa; Simón, Marc; Calle, Candela; Lanaspa, Jaume; Breitbart, William

2011-09-01

The psycho-social needs of patients with advanced chronic illness and their families include emotional, spiritual, and bereavement care. With a funding initiative by the La Caixa Foundation and design by the WHO Collaborating Center, we developed and implemented a program for the comprehensive care of terminally-ill individuals and their families, in Spain. The intent was to improve the psycho-social and spiritual dimensions of care, to generate experience and evidence, to explore models, and to act as catalyst in the Spanish National Strategy for Palliative Care. We reviewed the process of design, implementation, and initial evaluation of the program at 18 months. Thirty psycho-social teams' (PST) acting as support teams projects were initiated. There were 120 full-time healthcare professionals appointed (58% clinical psychologists). These professionals received training through a comprehensive postgraduate course, and all used the same documentation. Some results were collated 18 months post-implementation. The total number of patients attended to was 10,954, and the number of relatives was 17,715. The preliminary clinical outcomes show a significant improvement in well-being, and a decrease in anxiety and insomnia, although there was a smaller impact on alleviating depression. Healthcare professionals collated results on satisfaction with palliative care (PC) services. Based on these preliminary results, we suggest that the PST can be a model of organization that is effective and efficient in improving the psycho-social and spiritual aspects of care of terminally ill patients. Further follow-up and evaluation with validated tools are the main goals for the immediate future.

Developing an instrument to measure effective factors on Clinical Learning.

PubMed

Dadgaran, Ideh; Shirazi, Mandana; Mohammadi, Aeen; Ravari, Ali

2016-07-01

Although nursing students spend a large part of their learning period in the clinical environment, clinical learning has not been perceived by its nature yet. To develop an instrument to measure effective factors on clinical learning in nursing students. This is a mixed methods study performed in 2 steps. First, the researchers defined "clinical learning" in nursing students through qualitative content analysis and designed items of the questionnaire based on semi-structured individual interviews with nursing students. Then, as the second step, psychometric properties of the questionnaire were evaluated using the face validity, content validity, construct validity, and internal consistency evaluated on 227 students from fourth or higher semesters. All the interviews were recorded and transcribed, and then, they were analyzed using Max Qualitative Data Analysis and all of qualitative data were analyzed using SPSS 14. To do the study, we constructed the preliminary questionnaire containing 102 expressions. After determination of face and content validities by qualitative and quantitative approaches, the expressions of the questionnaire were reduced to 45. To determine the construct validity, exploratory factor analysis was applied. The results indicated that the maximum variance percentage (40.55%) was defined by the first 3 factors while the rest of the total variance percentage (59.45%) was determined by the other 42 factors. Results of exploratory factor analysis of this questionnaire indicated the presence of 3 instructor-staff, students, and educational related factors. Finally, 41 expressions were kept in 3 factor groups. The α-Cronbach coefficient (0.93) confirmed the high internal consistency of the questionnaire. Results indicated that the prepared questionnaire was an efficient instrument in the study of the effective factors on clinical learning as viewed by nursing students since it involves 41 expressions and properties such as instrument design based on perception and experiences of the nursing students about effective factors on clinical learning, definition of facilitator and preventive factors of the clinical learning, simple scoring, suitable validity and reliability, and applicability in different occasions.

VRPI Thermoresponsive Reversibly Attachable Patch for Temporary Intervention in Ocular Trauma

DTIC Science & Technology

2014-09-01

Polymerization (ATRP) on biocompatible substrates (e.g. parylene, polyimide , etc.). Adhesion data performed on preliminary samples under uniaxial testing...adhesion performance is completed in vitro, adhesion in vivo and biocompatibility will be assessed using a rabbit animal model. 15. SUBJECT TERMS...vitro, validate adhesive performance in vivo and perform preliminary biocompatibility assessments. 2. Keywords. sutureless wound repair

The Adaptation of the Mathematics Anxiety Rating Scale-Elementary Form into Turkish, Language Validity, and Preliminary Psychometric Investigation

ERIC Educational Resources Information Center

Baloglu, Mustafa; Balgalmis, Esra

2010-01-01

The purpose of the present study was to adapt the Mathematics Anxiety Rating Scale- Elementary Form (MARS-E, Suinn, 1988) into Turkish by first doing the translation of its items and then the preliminary psychometric investigation of the Turkish form. The study included four different samples: 30 bilingual language experts, 50 Turkish language…

Numerical Simulation of a Double-anode Magnetron Injection Gun for 110 GHz, 1 MW Gyrotron

NASA Astrophysics Data System (ADS)

Singh, Udaybir; Kumar, Nitin; Purohit, L. P.; Sinha, Ashok K.

2010-07-01

A 40 A double-anode magnetron injection gun for a 1 MW, 110 GHz gyrotron has been designed. The preliminary design has been obtained by using some trade-off equations. The electron beam analysis has been performed by using the commercially available code EGUN and the in-house developed code MIGANS. The operating mode of the gyrotron is TE22,6 and it is operated in the fundamental harmonic. The electron beam with a low transverse velocity spread ( δ {β_{ bot max }} = 2.26% ) and the transverse-to-axial velocity ratio of the electron beam (α) = 1.37 is obtained. The simulated results of the MIG obtained with the EGUN code have been validated with another trajectory code TRAK. The results on the design output parameters obtained by both the codes are in good agreement. The sensitivity analysis has been carried out by changing the different gun parameters to decide the fabrication tolerance.

Preliminary Psychometric Analysis of the Modified Perceived Value of Certification Tool for the Nurse Educator.

PubMed

Barbe, Tammy

2015-01-01

The purpose of this study was to examine psychometric properties of the Perceived Value of Certification Tool© with a focus on nurse educator certification (PVCT-NE) in a sample of nurse educators. Greater understanding of faculty perceptions of certification is necessary to facilitate a strong cadre of nursing faculty; however, research around nurse educator certification is limited by a lack of reliable and valid instruments to measure such perceptions. Twenty-four nursing faculty from one university participated in the psychometric study, which involved completion of the PVCT-NE in a web-based survey format. Internal consistency reliability was excellent. Cronbach's alpha for the total PVCT-NE was .94 (.93 for the intrinsic subscale and .86 for the extrinsic subscale). A content validity index of .95 was obtained. There is preliminary evidence that the PVCT-NE is a reliable and valid instrument to measure perceived value of certification in nurse educators.

Fisk-based criteria to support validation of detection methods for drinking water and air.

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacDonell, M.; Bhattacharyya, M.; Finster, M.

2009-02-18

This report was prepared to support the validation of analytical methods for threat contaminants under the U.S. Environmental Protection Agency (EPA) National Homeland Security Research Center (NHSRC) program. It is designed to serve as a resource for certain applications of benchmark and fate information for homeland security threat contaminants. The report identifies risk-based criteria from existing health benchmarks for drinking water and air for potential use as validation targets. The focus is on benchmarks for chronic public exposures. The priority sources are standard EPA concentration limits for drinking water and air, along with oral and inhalation toxicity values. Many contaminantsmore » identified as homeland security threats to drinking water or air would convert to other chemicals within minutes to hours of being released. For this reason, a fate analysis has been performed to identify potential transformation products and removal half-lives in air and water so appropriate forms can be targeted for detection over time. The risk-based criteria presented in this report to frame method validation are expected to be lower than actual operational targets based on realistic exposures following a release. Note that many target criteria provided in this report are taken from available benchmarks without assessing the underlying toxicological details. That is, although the relevance of the chemical form and analogues are evaluated, the toxicological interpretations and extrapolations conducted by the authoring organizations are not. It is also important to emphasize that such targets in the current analysis are not health-based advisory levels to guide homeland security responses. This integrated evaluation of chronic public benchmarks and contaminant fate has identified more than 200 risk-based criteria as method validation targets across numerous contaminants and fate products in drinking water and air combined. The gap in directly applicable values is considerable across the full set of threat contaminants, so preliminary indicators were developed from other well-documented benchmarks to serve as a starting point for validation efforts. By this approach, at least preliminary context is available for water or air, and sometimes both, for all chemicals on the NHSRC list that was provided for this evaluation. This means that a number of concentrations presented in this report represent indirect measures derived from related benchmarks or surrogate chemicals, as described within the many results tables provided in this report.« less

PLCO Ovarian Phase III Validation Study — EDRN Public Portal

Cancer.gov

Our preliminary data indicate that the performance of CA 125 as a screening test for ovarian cancer can be improved upon by additional biomarkers. With completion of one additional validation step, we will be ready to test the performance of a consensus marker panel in a phase III validation study. Given the original aims of the PLCO trial, we believe that the PLCO represents an ideal longitudinal cohort offering specimens for phase III validation of ovarian cancer biomarkers.

Doppler Lidar System Design via Interdisciplinary Design Concept at NASA Langley Research Center - Part II

NASA Technical Reports Server (NTRS)

Crasner, Aaron I.; Scola,Salvatore; Beyon, Jeffrey Y.; Petway, Larry B.

2014-01-01

Optimized designs of the Navigation Doppler Lidar (NDL) instrument for Autonomous Landing Hazard Avoidance Technology (ALHAT) were accomplished via Interdisciplinary Design Concept (IDEC) at NASA Langley Research Center during the summer of 2013. Three branches in the Engineering Directorate and three students were involved in this joint task through the NASA Langley Aerospace Research Summer Scholars (LARSS) Program. The Laser Remote Sensing Branch (LRSB), Mechanical Systems Branch (MSB), and Structural and Thermal Systems Branch (STSB) were engaged to achieve optimal designs through iterative and interactive collaborative design processes. A preliminary design iteration was able to reduce the power consumption, mass, and footprint by removing redundant components and replacing inefficient components with more efficient ones. A second design iteration reduced volume and mass by replacing bulky components with excessive performance with smaller components custom-designed for the power system. Thermal modeling software was used to run steady state thermal analyses, which were used to both validate the designs and recommend further changes. Analyses were run on each redesign, as well as the original system. Thermal Desktop was used to run trade studies to account for uncertainty and assumptions about fan performance and boundary conditions. The studies suggested that, even if the assumptions were significantly wrong, the redesigned systems would remain within operating temperature limits.

Preliminary design package for prototype solar heating system

NASA Technical Reports Server (NTRS)

1976-01-01

A preliminary design review on the development of a prototype solar heating system for single family dwellings is presented. The collector, storage, transport, control, and site data acquisition subsystems are described.

Preliminary Results Obtained in Integrated Safety Analysis of NASA Aviation Safety Program Technologies

NASA Technical Reports Server (NTRS)

2001-01-01

This is a listing of recent unclassified RTO technical publications processed by the NASA Center for AeroSpace Information from January 1, 2001 through March 31, 2001 available on the NASA Aeronautics and Space Database. Contents include 1) Cognitive Task Analysis; 2) RTO Educational Notes; 3) The Capability of Virtual Reality to Meet Military Requirements; 4) Aging Engines, Avionics, Subsystems and Helicopters; 5) RTO Meeting Proceedings; 6) RTO Technical Reports; 7) Low Grazing Angle Clutter...; 8) Verification and Validation Data for Computational Unsteady Aerodynamics; 9) Space Observation Technology; 10) The Human Factor in System Reliability...; 11) Flight Control Design...; 12) Commercial Off-the-Shelf Products in Defense Applications.

Preliminary drop-tower experiments on liquid-interface geometry in partially filled containers at zero gravity

NASA Technical Reports Server (NTRS)

Smedley, G.

1990-01-01

Plexiglass containers with rounded trapezoidal cross sections were designed and built to test the validity of Concus and Finn's existence theorem (1974, 1983) for a bounded free liquid surface at zero gravity. Experiments were carried out at the NASA Lewis two-second drop tower. Dyed ethanol-water solutions and three immiscible liquid pairs, with one liquid dyed, were tested. High-speed movies were used to record the liquid motion. Liquid rose to the top of the smaller end of the containers when the contact angle was small enough, in agreement with the theory. Liquid interface motion demonstrated a strong dependence on physical properties, including surface roughness and contamination.

Cruise performance and range prediction reconsidered

NASA Astrophysics Data System (ADS)

Torenbeek, Egbert

1997-05-01

A unified analytical treatment of the cruise performance of subsonic transport aircraft is derived, valid for gas turbine powerplant installations: turboprop, turbojet and turbofan powered aircraft. Different from the classical treatment the present article deals with compressibility effects on the aerodynamic characteristics. Analytical criteria are derived for optimum cruise lift coefficient and Mach number, with and without constraints on the altitude and engine rating. A simple alternative to the Bréguet range equation is presented which applies to several practical cruising flight techniques: flight at constant altitude and Mach number and stepped cruise/climb. A practical non-iterative procedure for computing mission and reserve fuel loads in the preliminary design stage is proposed.

Structured representation for requirements and specifications

NASA Technical Reports Server (NTRS)

Cohen, Gerald C.; Fisher, Gene; Frincke, Deborah; Wolber, Dave

1991-01-01

This document was generated in support of NASA contract NAS1-18586, Design and Validation of Digital Flight Control Systems suitable for Fly-By-Wire Applications, Task Assignment 2. Task 2 is associated with a formal representation of requirements and specifications. In particular, this document contains results associated with the development of a Wide-Spectrum Requirements Specification Language (WSRSL) that can be used to express system requirements and specifications in both stylized and formal forms. Included with this development are prototype tools to support the specification language. In addition a preliminary requirements specification methodology based on the WSRSL has been developed. Lastly, the methodology has been applied to an Advanced Subsonic Civil Transport Flight Control System.

Light aircraft sound transmission studies - Noise reduction model

NASA Technical Reports Server (NTRS)

Atwal, Mahabir S.; Heitman, Karen E.; Crocker, Malcolm J.

1987-01-01

Experimental tests conducted on the fuselage of a single-engine Piper Cherokee light aircraft suggest that the cabin interior noise can be reduced by increasing the transmission loss of the dominant sound transmission paths and/or by increasing the cabin interior sound absorption. The validity of using a simple room equation model to predict the cabin interior sound-pressure level for different fuselage and exterior sound field conditions is also presented. The room equation model is based on the sound power flow balance for the cabin space and utilizes the measured transmitted sound intensity data. The room equation model predictions were considered good enough to be used for preliminary acoustical design studies.

Synthesis of active controls for flutter suppression on a flight research wing

NASA Technical Reports Server (NTRS)

Abel, I.; Perry, B., III; Murrow, H. N.

1977-01-01

This paper describes some activities associated with the preliminary design of an active control system for flutter suppression capable of demonstrating a 20% increase in flutter velocity. Results from two control system synthesis techniques are given. One technique uses classical control theory, and the other uses an 'aerodynamic energy method' where control surface rates or displacements are minimized. Analytical methods used to synthesize the control systems and evaluate their performance are described. Some aspects of a program for flight testing the active control system are also given. This program, called DAST (Drones for Aerodynamics and Structural Testing), employs modified drone-type vehicles for flight assessments and validation testing.

Open source cardiology electronic health record development for DIGICARDIAC implementation

NASA Astrophysics Data System (ADS)

Dugarte, Nelson; Medina, Rubén.; Huiracocha, Lourdes; Rojas, Rubén.

2015-12-01

This article presents the development of a Cardiology Electronic Health Record (CEHR) system. Software consists of a structured algorithm designed under Health Level-7 (HL7) international standards. Novelty of the system is the integration of high resolution ECG (HRECG) signal acquisition and processing tools, patient information management tools and telecardiology tools. Acquisition tools are for management and control of the DIGICARDIAC electrocardiograph functions. Processing tools allow management of HRECG signal analysis searching for indicative patterns of cardiovascular pathologies. Telecardiology tools incorporation allows system communication with other health care centers decreasing access time to the patient information. CEHR system was completely developed using open source software. Preliminary results of process validation showed the system efficiency.

Aeroelastic Optimization of Generalized Tube and Wing Aircraft Concepts Using HCDstruct Version 2.0

NASA Technical Reports Server (NTRS)

Quinlan, Jesse R.; Gern, Frank H.

2017-01-01

Major enhancements were made to the Higher-fidelity Conceptual Design and structural optimization (HCDstruct) tool developed at NASA Langley Research Center (LaRC). Whereas previous versions were limited to hybrid wing body (HWB) configurations, the current version of HCDstruct now supports the analysis of generalized tube and wing (TW) aircraft concepts. Along with significantly enhanced user input options for all air- craft configurations, these enhancements represent HCDstruct version 2.0. Validation was performed using a Boeing 737-200 aircraft model, for which primary structure weight estimates agreed well with available data. Additionally, preliminary analysis of the NASA D8 (ND8) aircraft concept was performed, highlighting several new features of the tool.

Structural weights analysis of advanced aerospace vehicles using finite element analysis

NASA Technical Reports Server (NTRS)

Bush, Lance B.; Lentz, Christopher A.; Rehder, John J.; Naftel, J. Chris; Cerro, Jeffrey A.

1989-01-01

A conceptual/preliminary level structural design system has been developed for structural integrity analysis and weight estimation of advanced space transportation vehicles. The system includes a three-dimensional interactive geometry modeler, a finite element pre- and post-processor, a finite element analyzer, and a structural sizing program. Inputs to the system include the geometry, surface temperature, material constants, construction methods, and aerodynamic and inertial loads. The results are a sized vehicle structure capable of withstanding the static loads incurred during assembly, transportation, operations, and missions, and a corresponding structural weight. An analysis of the Space Shuttle external tank is included in this paper as a validation and benchmark case of the system.

Electromagnetic Physics Models for Parallel Computing Architectures

NASA Astrophysics Data System (ADS)

Amadio, G.; Ananya, A.; Apostolakis, J.; Aurora, A.; Bandieramonte, M.; Bhattacharyya, A.; Bianchini, C.; Brun, R.; Canal, P.; Carminati, F.; Duhem, L.; Elvira, D.; Gheata, A.; Gheata, M.; Goulas, I.; Iope, R.; Jun, S. Y.; Lima, G.; Mohanty, A.; Nikitina, T.; Novak, M.; Pokorski, W.; Ribon, A.; Seghal, R.; Shadura, O.; Vallecorsa, S.; Wenzel, S.; Zhang, Y.

2016-10-01

The recent emergence of hardware architectures characterized by many-core or accelerated processors has opened new opportunities for concurrent programming models taking advantage of both SIMD and SIMT architectures. GeantV, a next generation detector simulation, has been designed to exploit both the vector capability of mainstream CPUs and multi-threading capabilities of coprocessors including NVidia GPUs and Intel Xeon Phi. The characteristics of these architectures are very different in terms of the vectorization depth and type of parallelization needed to achieve optimal performance. In this paper we describe implementation of electromagnetic physics models developed for parallel computing architectures as a part of the GeantV project. Results of preliminary performance evaluation and physics validation are presented as well.

A preliminary study: validity and reliability of Turkish translation of migraine disability assessment (MIDAS) questionnaire in Turkish patients with chronic tension type headache.

PubMed

Gedikoglu, Umit; Ucler, Serap; Inan, Levent E; Coskun, Ozlem; Tunc, Tugba

2006-11-01

We have tested Turkish version of the Migraine Disability Assessment (MIDAS) questionnaire in patients with tension type headache. Thirty-two patients who had a tension type headache were included. Turkish version of the MIDAS questionnaire was applied to all patients. Additionally, the patients were asked to keep a 90-day diary. The day diary and the MIDAS questionnaire were compared at the end of the study period. We found that cronbach's alpha 0.82 and had good reliability. Our findings suggest that the MIDAS questionnaire that was originally designed for patients with migraine may be used in patients with chronic tension type headache.

Wing design for a civil tiltrotor transport aircraft

NASA Technical Reports Server (NTRS)

Rais-Rohani, Masoud

1994-01-01

The goal of this research is the proper tailoring of the civil tiltrotor's composite wing-box structure leading to a minimum-weight wing design. With focus on the structural design, the wing's aerodynamic shape and the rotor-pylon system are held fixed. The initial design requirement on drag reduction set the airfoil maximum thickness-to-chord ratio to 18 percent. The airfoil section is the scaled down version of the 23 percent-thick airfoil used in V-22's wing. With the project goal in mind, the research activities began with an investigation of the structural dynamic and aeroelastic characteristics of the tiltrotor configuration, and the identification of proper procedures to analyze and account for these characteristics in the wing design. This investigation led to a collection of more than thirty technical papers on the subject, some of which have been referenced here. The review of literature on the tiltrotor revealed the complexity of the system in terms of wing-rotor-pylon interactions. The aeroelastic instability or whirl flutter stemming from wing-rotor-pylon interactions is found to be the most critical mode of instability demanding careful consideration in the preliminary wing design. The placement of wing fundamental natural frequencies in bending and torsion relative to each other and relative to the rotor 1/rev frequencies is found to have a strong influence on the whirl flutter. The frequency placement guide based on a Bell Helicopter Textron study is used in the formulation of frequency constraints. The analysis and design studies are based on two different finite-element computer codes: (1) MSC/NASATRAN and (2) WIDOWAC. These programs are used in parallel with the motivation to eventually, upon necessary modifications and validation, use the simpler WIDOWAC code in the structural tailoring of the tiltrotor wing. Several test cases were studied for the preliminary comparison of the two codes. The results obtained so far indicate a good overall agreement between the two codes.

Development and use of computational techniques in Army Aviation research and development programs for crash resistant helicopter technology

NASA Technical Reports Server (NTRS)

Burrows, Leroy T.

1993-01-01

During the 1960's over 30 full-scale aircraft crash tests were conducted by the Flight Safety Foundation under contract to the Aviation Applied Technology Directorate (AATD) of the U.S. Army Aviation Systems Command (AVSCOM). The purpose of these tests were to conduct crash injury investigations that would provide a basis for the formulation of sound crash resistance design criteria for light fixed-wing and rotary wing aircraft. This resulted in the Crash Survival Design Criteria Designer's Guide which was first published in 1967 and has been revised numerous times, the last being in 1989. Full-scale aircraft crash testing is an expensive way to investigate structural deformations of occupied spaces and to determine the decelerative loadings experienced by occupants in a crash. This gave initial impetus to the U.S. Army to develop analytical methods to predict the dynamic response of aircraft structures in a crash. It was believed that such analytical tools could be very useful in the preliminary design stage of a new helicopter system which is required to demonstrate a level of crash resistance and had to be more cost effective than full-scale crash tests or numerous component design support tests. From an economic point of view, it is more efficient to optimize for the incorporation of crash resistance features early in the design stage. However, during preliminary design it is doubtful if sufficient design details, which influence the exact plastic deformation shape of structural elements, will be available. The availability of simple procedures to predict energy absorption and load-deformation characteristics will allow the designer to initiate valuable cost, weight, and geometry tradeoff studies. The development of these procedures will require some testing of typical specimens. This testing should, as a minimum, verify the validity of proposed procedures for providing pertinent nonlinear load-deformation data. It was hoped that through the use of these analytical models, the designer could optimize aircraft design for crash resistance from both a weight and cost increment standpoint, thus enhancing the acceptance of the design criteria for crash resistance.

Near-term hybrid vehicle program, phase 1. Appendix C: Preliminary design data package

NASA Technical Reports Server (NTRS)

1979-01-01

The design methodology, the design decision rationale, the vehicle preliminary design summary, and the advanced technology developments are presented. The detailed vehicle design, the vehicle ride and handling and front structural crashworthiness analysis, the microcomputer control of the propulsion system, the design study of the battery switching circuit, the field chopper, and the battery charger, and the recent program refinements and computer results are presented.

78 FR 57587 - Environmental Impact and Related Procedures-Programmatic Agreements and Additional Categorical...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-19

... administrative and NEPA processing by encouraging grant applicants to design proposed projects so that... geotechnical and other investigations to provide information for preliminary design and for environmental... information for preliminary design and for environmental analyses and permitting purposes and is found...

Preliminary Results for the OECD/NEA Time Dependent Benchmark using Rattlesnake, Rattlesnake-IQS and TDKENO

DOE Office of Scientific and Technical Information (OSTI.GOV)

DeHart, Mark D.; Mausolff, Zander; Weems, Zach

2016-08-01

One goal of the MAMMOTH M&S project is to validate the analysis capabilities within MAMMOTH. Historical data has shown limited value for validation of full three-dimensional (3D) multi-physics methods. Initial analysis considered the TREAT startup minimum critical core and one of the startup transient tests. At present, validation is focusing on measurements taken during the M8CAL test calibration series. These exercises will valuable in preliminary assessment of the ability of MAMMOTH to perform coupled multi-physics calculations; calculations performed to date are being used to validate the neutron transport solver Rattlesnake\\cite{Rattlesnake} and the fuels performance code BISON. Other validation projects outsidemore » of TREAT are available for single-physics benchmarking. Because the transient solution capability of Rattlesnake is one of the key attributes that makes it unique for TREAT transient simulations, validation of the transient solution of Rattlesnake using other time dependent kinetics benchmarks has considerable value. The Nuclear Energy Agency (NEA) of the Organization for Economic Cooperation and Development (OECD) has recently developed a computational benchmark for transient simulations. This benchmark considered both two-dimensional (2D) and 3D configurations for a total number of 26 different transients. All are negative reactivity insertions, typically returning to the critical state after some time.« less

Preliminary validation of the Yale Food Addiction Scale for children.

PubMed

Gearhardt, Ashley N; Roberto, Christina A; Seamans, Marissa J; Corbin, William R; Brownell, Kelly D

2013-12-01

Evidence is growing that an addictive process may play a role in problematic eating behavior. The majority of research on this topic has examined the concept of "food addiction" solely in adult samples. If certain foods have addictive potential, children may be impacted as much as (or more) than adults due to psychological and neurobiological vulnerabilities at younger developmental stages. In the current study, we developed a measure of food addiction in children that reflects the diagnostic indicators of addiction. The content and reading level of the Yale Food Addiction Scale (YFAS) was altered to be appropriate for children (YFAS-C). The YFAS-C and other eating-related measures were administered to study participants to examine the validity and reliability of the YFAS-C. 75 children were recruited from the community ranging from lean to obese. The validation of the YFAC-C provides preliminary support for its convergent validity with like constructs and incremental validity in predicting body mass index. Internal consistency was adequate given the small number of items on the scale. The YFAS-C appears to be a helpful tool for identifying addictive-like eating in children. © 2013.

Measuring attitudes towards suicide: Preliminary evaluation of an attitude towards suicide scale.

PubMed

Cwik, Jan Christopher; Till, Benedikt; Bieda, Angela; Blackwell, Simon E; Walter, Carolin; Teismann, Tobias

2017-01-01

Our study aimed to validate a previously published scale assessing attitudes towards suicide. Factor structure, convergent and discriminant validity, and predictive validity were investigated. Adult German participants (N=503; mean age=24.74years; age range=18-67years) anonymously completed a set of questionnaires. An exploratory factor analysis was conducted, and incongruous items were deleted. Subsequently, scale properties of the reduced scale and its construct validity were analyzed. A confirmatory factor analysis was then conducted in an independent sample (N=266; mean age=28.77years; age range=18-88years) to further confirm the factor structure of the questionnaire. Parallel analysis indicated a three-factor solution, which was also supported by confirmatory factor analysis: right to commit suicide, interpersonal gesture and resilience. The subscales demonstrated acceptable construct and discriminant validity. Cronbach's α for the subscales ranged from 0.67 to 0.83, explaining 49.70% of the total variance. Positive attitudes towards suicide proved to be predictive of suicide risk status, providing preliminary evidence for the utility of the scale. Future studies aiming to reproduce the factor structure in a more heterogeneous sample are warranted. Copyright © 2016 Elsevier Inc. All rights reserved.

Sediment Export from Forest Road Turn-outs: A Study Design and Preliminary Results

Treesearch

Johnny M. Grace

1998-01-01

This paper reports the design and preliminary results of a study that evaluates the effects of commonly prescribed forest road runoff control treatments. A study design which utilizes runoff samplers, runoff diversion walls, sediment filter bags, and erosion stakes to evaluate sediment transport through runoff control treatments is documented. The study design will...

Serial and parallel power equipment with high-temperature superconducting elements

NASA Technical Reports Server (NTRS)

Bencze, Laszlo; Goebl, Nandor; Palotas, Bela; Vajda, Istvan

1995-01-01

One of the prospective, practical applications of high-temperature superconductors is the fault-current limitation in electrical energy networks. The development and testing of experimental HTSC serial current limiters have been reported in the literature. A Hungarian electric power company has proposed the development of a parallel equipment for arc suppressing both in the industrial and customers' networks. On the basis of the company's proposal the authors have outlined the scheme of a compound circuit that can be applied both for current limitation and arc suppressing. In this paper the design principles and methods of the shunt equipment are presented. These principles involve the electrical, mechanical and cryogenic aspects with the special view on the electrical and mechanical connection between the HTSC material and the current lead. Preliminary experiments and tests have been carried out to demonstrate the validity of the design principles developed. The results of the experiments and of the technological investigations are presented.

Investigation of an advanced fault tolerant integrated avionics system

NASA Technical Reports Server (NTRS)

Dunn, W. R.; Cottrell, D.; Flanders, J.; Javornik, A.; Rusovick, M.

1986-01-01

Presented is an advanced, fault-tolerant multiprocessor avionics architecture as could be employed in an advanced rotorcraft such as LHX. The processor structure is designed to interface with existing digital avionics systems and concepts including the Army Digital Avionics System (ADAS) cockpit/display system, navaid and communications suites, integrated sensing suite, and the Advanced Digital Optical Control System (ADOCS). The report defines mission, maintenance and safety-of-flight reliability goals as might be expected for an operational LHX aircraft. Based on use of a modular, compact (16-bit) microprocessor card family, results of a preliminary study examining simplex, dual and standby-sparing architectures is presented. Given the stated constraints, it is shown that the dual architecture is best suited to meet reliability goals with minimum hardware and software overhead. The report presents hardware and software design considerations for realizing the architecture including redundancy management requirements and techniques as well as verification and validation needs and methods.

NectarCAM, a camera for the medium sized telescopes of the Cherenkov telescope array

NASA Astrophysics Data System (ADS)

Glicenstein, J.-F.; Shayduk, M.

2017-01-01

NectarCAM is a camera proposed for the medium-sized telescopes of the Cherenkov Telescope Array (CTA) which covers the core energy range of 100 GeV to 30 TeV. It has a modular design and is based on the NECTAr chip, at the heart of which is a GHz sampling Switched Capacitor Array and 12-bit Analog to Digital converter. The camera will be equipped with 265 7-photomultiplier modules, covering a field of view of 8 degrees. Each module includes photomultiplier bases, high voltage supply, pre-amplifier, trigger, readout and Ethernet transceiver. The recorded events last between a few nanoseconds and tens of nanoseconds. The expected performance of the camera are discussed. Prototypes of NectarCAM components have been built to validate the design. Preliminary results of a 19-module mini-camera are presented, as well as future plans for building and testing a full size camera.

The Requirement Generation for the SKYLON Launch System

NASA Astrophysics Data System (ADS)

Hempsell, M.

SKYLON is a reusable single stage to orbit spaceplane intended to lower the cost of reaching space. The project has a 25 year history stretching back to the British Aerospace HOTOL study and over the many configuration iterations the performance has been established using feasibility designs, with market studies being used to establish that the resulting system has utility. In preparation for the final concept study of the D1 configuration the market and other stakeholder's requirements have been prepared as an input rather than an output to the design process. These requirements have been established from both an analysis of the existing market - as a model for the entry into service requirements - and future studies of advanced applications - as a model for the longer term requirements. The final conclusions have been incorporated into a preliminary User Manual which is the basis of a requirements' validation exercise.

A Review of Services and Interventions for Runaway and Homeless Youth: Moving Forward.

PubMed

Slesnick, Natasha; Dashora, Pushpanjali; Letcher, Amber; Erdem, Gizem; Serovich, Julianne

2009-07-01

Research focused on the impact of community-based services and treatment interventions designed to intervene in the lives of runaway and homeless youth has increased in the last two decades in the U.S. and internationally. In light of the tremendous need for identifying effective strategies to end homelessness and its associated problems among youth, this paper summarizes and critiques the findings of the extant literature including U.S., international, and qualitative studies. Thirty-two papers met criteria for inclusion in the review. Among the conclusions are that comprehensive interventions which target the varied and interconnected needs of these youth and families may be worthy of more study than studies that isolate the intervention focus on one problem. Also, more research incorporating design strategies that increase the reliability and validity of study findings is needed. Other preliminary conclusions and future directions are offered.

Site-Specific Research Conducted in Support of the Salton Sea Solar Pond Project - FY 1982 Report

NASA Technical Reports Server (NTRS)

French, R. L.; Marsh, H. E.; Roschke, E. J.; Wu, Y. C.

1984-01-01

The design and operation of a salt-gradient solar pond power plant at the Salton Sea presents problems not encountered at small research ponds that were built in the United States. The specific characteristics of the Salton Sea site and the desire to construct the pond using the local clay as a sealant represent major deviations from previous solar pond experience. The site-specific research in support of the plant design is described. The research activity included validation of the spectrophotometric light transmission measurement technique, a search for options for clarifying the turbid and colored water of the Salton Sea, development of water clarification specifications in terms common to industry practice, quantification of gas production from microbiological reactions in the ground, a determination of the combined effects of temperature and salinity on the permeation of the local clays, and a preliminary evaluation of material corrosion.

Development and Life Prediction of Erosion Resistant Turbine Low Conductivity Thermal Barrier Coatings

NASA Technical Reports Server (NTRS)

Zhu, Dongming; Miller, Robert A.; Kuczmarski, Maria A.

2010-01-01

Future rotorcraft propulsion systems are required to operate under highly-loaded conditions and in harsh sand erosion environments, thereby imposing significant material design and durability issues. The incorporation of advanced thermal barrier coatings (TBC) in high pressure turbine systems enables engine designs with higher inlet temperatures, thus improving the engine efficiency, power density and reliability. The impact and erosion resistance of turbine thermal barrier coating systems are crucial to the turbine coating technology application, because a robust turbine blade TBC system is a prerequisite for fully utilizing the potential coating technology benefit in the rotorcraft propulsion. This paper describes the turbine blade TBC development in addressing the coating impact and erosion resistance. Advanced thermal barrier coating systems with improved performance have also been validated in laboratory simulated engine erosion and/or thermal gradient environments. A preliminary life prediction modeling approach to emphasize the turbine blade coating erosion is also presented.

Space station wardroom habitability and equipment study

NASA Technical Reports Server (NTRS)

Nixon, David; Miller, Christopher; Fauquet, Regis

1989-01-01

Experimental designs in life-size mock-up form for the wardroom facility for the Space Station Habitability Module are explored and developed. In Phase 1, three preliminary concepts for the wardroom configuration are fabricated and evaluated. In Phase 2, the results of Phase 1 are combined with a specific range of program design requirements to provide the design criteria for the fabrication of an innovative medium-fidelity mock-up of a wardrobe configuration. The study also focuses on the design and preliminary prototyping of selected equipment items including crew exercise compartments, a meal/meeting table and a portable workstation. Design criteria and requirements are discussed and documented. Preliminary and final mock-ups and equipment prototypes are described and illustrated.

Developing Analytical Inspection Criteria for Health IT Personnel with Minimum Training in Cognitive Ergonomics: A Practical Solution to EHR Improving EHR Usability

PubMed Central

Zhang, Zhen; Franklin, Amy; Walji, Muhammad; Zhang, Jiajie; Gong, Yang

2014-01-01

EHR usability has been identified as a major barrier to care quality optimization. One major challenge of improving EHR usability is the lack of systematic training in usability or cognitive ergonomics for EHR designers/developers in the vendor community and EHR analysts making significant configurations in healthcare organizations. A practical solution is to provide usability inspection tools that can be easily operationalized by EHR analysts. This project is aimed at developing a set of usability tools with demonstrated validity and reliability. We present a preliminary study of a metric for cognitive transparency and an exploratory experiment testing its validity in predicting the effectiveness of action-effect mapping. Despite the pilot nature of both, we found high sensitivity and specificity of the metric and higher response accuracy within a shorter time for users to determine action-effect mappings in transparent user interface controls. We plan to expand the sample size in our empirical study. PMID:25954439

Creating wavelet-based models for real-time synthesis of perceptually convincing environmental sounds

NASA Astrophysics Data System (ADS)

Miner, Nadine Elizabeth

1998-09-01

This dissertation presents a new wavelet-based method for synthesizing perceptually convincing, dynamic sounds using parameterized sound models. The sound synthesis method is applicable to a variety of applications including Virtual Reality (VR), multi-media, entertainment, and the World Wide Web (WWW). A unique contribution of this research is the modeling of the stochastic, or non-pitched, sound components. This stochastic-based modeling approach leads to perceptually compelling sound synthesis. Two preliminary studies conducted provide data on multi-sensory interaction and audio-visual synchronization timing. These results contributed to the design of the new sound synthesis method. The method uses a four-phase development process, including analysis, parameterization, synthesis and validation, to create the wavelet-based sound models. A patent is pending for this dynamic sound synthesis method, which provides perceptually-realistic, real-time sound generation. This dissertation also presents a battery of perceptual experiments developed to verify the sound synthesis results. These experiments are applicable for validation of any sound synthesis technique.

Gendered sexuality: a new model and measure of attraction and intimacy.

PubMed

Starks, Tyrel J; Gilbert, Brenda O; Fischer, Ann R; Weston, Rebecca; DiLalla, David L

2009-01-01

Currently, the literature related to sexual orientation is ambiguous with regard to the relationship of sexual orientation, sexual identity, attraction, and intimacy. In order to explore the relationships of self-identified categorical sexual identity (which is the most popular method of sexual orientation assessment) with attraction and intimacy, it is imperative that researchers have access to a reliable and valid measure of the latter. The present study proposes a model for conceptualizing attraction and intimacy, termed gendered sexuality, and examines the factor structure of a measure designed to assess the construct. Results suggest that four factors adequately accounted for the variance in gendered sexuality in a large sample of young adults. These factors assess attraction to females, attraction to males, intimacy with females, and intimacy with males. Exploratory analyses provided preliminary evidence of potential construct validity and suggested that discrepancies between desired and available behavior predict dissatisfaction in interpersonal role as measured by the Outcome Questionnaire 45.2.

Preliminary development of POEAW in enhancing K-11 students’ understanding level on impulse and momentum

NASA Astrophysics Data System (ADS)

Luthfiani, T. A.; Sinaga, P.; Samsudin, A.

2018-05-01

We have been analyzed that there were limited research about Predict-Observe- Explain which use writing process with conceptual change text strategy. This study aims to develop a learning model namely Predict-Observe-Explain-Apply-Writing (POEAW) which is able to enhance students’ understanding level. The research method utilized the 4D model (Defining, Designing, Developing and Disseminating) that is formally limited to Developing Stage. There are four experts who judge the learning component (syntax, lesson plan, teaching material and student worksheet) and matter component (learning quality and content component). The result of this study are obtained expert validity test score average of 87% for learning content and 89% for matter component that means the POEAW is valid and can be tested in classroom learning. This research producing POEAW learning model that has five main steps, Predict, Observe, Explain, Apply and Write. To sum up, we have early developed POEAW in enhancing K-11 students’ understanding levels on impulse and momentum.

Understanding the Consequences of Newcomer Integration Processes: The Sport Team Socialization Tactics Questionnaire.

PubMed

Benson, Alex J; Eys, Mark

2017-02-01

The ways in which newcomers are integrated into sport teams may have broad consequences for the athletes entering the group, as well as for the existing team members. Drawing from organizational socialization theory, the current research developed a questionnaire to assess athletes' perceptions of how newcomers are socialized into their group. Across four studies, think-aloud interviews (N = 8), an expert panel review (N = 6), cross-sectional tests of the factor structure (N Study 2  = 197; N Study 3  = 460), and a two-wave correlational design (N Study 4  = 194) were used to evaluate the construct validity and the internal consistency of the Sport Team Socialization Tactics Questionnaire (STSTQ). Collectively, these efforts identified a three-factor structure underlying the STSTQ and provided preliminary evidence for its validity. The STSTQ enables researchers to systematically examine the individual- and group-level consequences associated with the socialization tactics implemented in sport teams.

Preliminary validation of assays to measure parameters of calcium metabolism in captive Asian and African elephants in western Europe.

PubMed

van Sonsbeek, Gerda R; van der Kolk, Johannes H; van Leeuwen, Johannes P T M; Schaftenaar, Willem

2011-05-01

Hypocalcemia is a well known cause of dystocia in animals, including elephants in captivity. In order to study calcium metabolism in elephants, it is of utmost importance to use properly validated assays, as these might be prone to specific matrix effects in elephant blood. The aim of the current study was to conduct preliminary work for validation of various parameters involved in calcium metabolism in both blood and urine of captive elephants. Basal values of these parameters were compared between Asian elephants (Elephas maximus) and African elephants (Loxodonta africana). Preliminary testing of total calcium, inorganic phosphorus, and creatinine appeared valid for use in plasma and creatinine in urine in both species. Furthermore, measurements of bone alkaline phosphatase and N-terminal telopeptide of type I collagen appeared valid for use in Asian elephants. Mean heparinized plasma ionized calcium concentration and pH were not significantly affected by 3 cycles of freezing and thawing. Storage at 4 °C, room temperature, and 37 °C for 6, 12, and 24 hr did not alter the heparinized plasma ionized calcium concentration in Asian elephants. The following linear regression equation using pH (range: 6.858-7.887) and ionized calcium concentration in heparinized plasma was utilized: iCa(7.4) (mmol/l) = -2.1075 + 0.3130·pH(actual) + 0.8296·iCa(actual) (mmol/l). Mean basal values for pH and plasma in Asian elephant whole blood were 7.40 ± 0.048 and 7.49 ± 0.077, respectively. The urinary specific gravity and creatinine concentrations in both Asian and African elephants were significantly correlated and both were significantly lower in Asian elephants. © 2011 The Author(s)

Assessing Fan Flutter Stability in the Presence of Inlet Distortion Using One-way and Two-way Coupled Methods

NASA Technical Reports Server (NTRS)

Herrick, Gregory P.

2014-01-01

Concerns regarding noise, propulsive efficiency, and fuel burn are inspiring aircraft designs wherein the propulsive turbomachines are partially (or fully) embedded within the airframe; such designs present serious concerns with regard to aerodynamic and aeromechanic performance of the compression system in response to inlet distortion. Previously, a preliminary design of a forward-swept high-speed fan exhibited flutter concerns in cleaninlet flows, and the present author then studied this fan further in the presence of off-design distorted in-flows. Continuing this research, a three-dimensional, unsteady, Navier-Stokes computational fluid dynamics code is again applied to analyze and corroborate fan performance with clean inlet flow and now with a simplified, sinusoidal distortion of total pressure at the aerodynamic interface plane. This code, already validated in its application to assess aerodynamic damping of vibrating blades at various flow conditions using a one-way coupled energy-exchange approach, is modified to include a two-way coupled time-marching aeroelastic simulation capability. The two coupling methods are compared in their evaluation of flutter stability in the presence of distorted in-flows.

Assessing Fan Flutter Stability in Presence of Inlet Distortion Using One-Way and Two-Way Coupled Methods

NASA Technical Reports Server (NTRS)

Herrick, Gregory P.

2014-01-01

Concerns regarding noise, propulsive efficiency, and fuel burn are inspiring aircraft designs wherein the propulsive turbomachines are partially (or fully) embedded within the airframe; such designs present serious concerns with regard to aerodynamic and aeromechanic performance of the compression system in response to inlet distortion. Previously, a preliminary design of a forward-swept high-speed fan exhibited flutter concerns in clean-inlet flows, and the present author then studied this fan further in the presence of off-design distorted in-flows. Continuing this research, a three-dimensional, unsteady, Navier-Stokes computational fluid dynamics code is again applied to analyze and corroborate fan performance with clean inlet flow and now with a simplified, sinusoidal distortion of total pressure at the aerodynamic interface plane. This code, already validated in its application to assess aerodynamic damping of vibrating blades at various flow conditions using a one-way coupled energy-exchange approach, is modified to include a two-way coupled timemarching aeroelastic simulation capability. The two coupling methods are compared in their evaluation of flutter stability in the presence of distorted in-flows.

7 CFR 1780.55 - Preliminary engineering reports and Environmental Reports.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 12 2011-01-01 2011-01-01 false Preliminary engineering reports and Environmental..., Designing, Bidding, Contracting, Constructing and Inspections § 1780.55 Preliminary engineering reports and Environmental Reports. Preliminary engineering reports (PERs) must conform to customary professional standards...

7 CFR 1780.55 - Preliminary engineering reports and Environmental Reports.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 12 2012-01-01 2012-01-01 false Preliminary engineering reports and Environmental..., Designing, Bidding, Contracting, Constructing and Inspections § 1780.55 Preliminary engineering reports and Environmental Reports. Preliminary engineering reports (PERs) must conform to customary professional standards...

7 CFR 1780.55 - Preliminary engineering reports and Environmental Reports.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 12 2014-01-01 2013-01-01 true Preliminary engineering reports and Environmental..., Designing, Bidding, Contracting, Constructing and Inspections § 1780.55 Preliminary engineering reports and Environmental Reports. Preliminary engineering reports (PERs) must conform to customary professional standards...

7 CFR 1780.55 - Preliminary engineering reports and Environmental Reports.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Preliminary engineering reports and Environmental..., Designing, Bidding, Contracting, Constructing and Inspections § 1780.55 Preliminary engineering reports and Environmental Reports. Preliminary engineering reports (PERs) must conform to customary professional standards...

7 CFR 1780.55 - Preliminary engineering reports and Environmental Reports.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 12 2013-01-01 2013-01-01 false Preliminary engineering reports and Environmental..., Designing, Bidding, Contracting, Constructing and Inspections § 1780.55 Preliminary engineering reports and Environmental Reports. Preliminary engineering reports (PERs) must conform to customary professional standards...

Preliminary System Design of the SWRL Financial System.

ERIC Educational Resources Information Center

Ikeda, Masumi

The preliminary system design of the computer-based Southwest Regional Laboratory's (SWRL) Financial System is outlined. The system is designed to produce various management and accounting reports needed to maintain control of SWRL operational and financial activities. Included in the document are descriptions of the various types of system…

The Portuguese formal social support for autonomy and dependence in pain inventory (FSSADI_PAIN): a preliminary validation study.

PubMed

Matos, Marta; Bernardes, Sónia F

2013-09-01

Development and preliminary validation of a Portuguese measure of perceived Formal Social Support for Autonomy and Dependence in Pain (FSSADI_PAIN). One hundred and fifty-one older adults (88.1% women), between 56 and 94 years of age (M = 75.41; SD = 9.11), who attended one of the following institutions--day care centre (33.1%), nursing home (36.4%) and senior university (30.5%)--were recruited for this study. Along with the FSSADI_PAIN, participants filled out the Portuguese versions of the Brief Pain Inventory (Azevedo et al., 2007, Dor, 15, 6) and the Social Support Scale of Medical Outcomes Survey (Pais-Ribeiro & Ponte, 2009, Psicologia, Saúde & Doença, 10, 163). The factorial structure reflected the functions of perceived promotion of (1) dependence and (2) autonomy, showing good internal consistency (α > .70) and sensitivity indices. The FSSADI_PAIN showed good content, discriminant and criterion validity; it differentiated the perceptions of promotion of dependence/autonomy according to individual's pain severity and disability, as well as the type of institution. These preliminary findings suggest that the FSSADI_PAIN is an innovative and promising measure of perceived formal social support adapted to pain-related contexts. © 2012 The British Psychological Society.

Developing Online Course Portal to Improve Teachers’ Competency in Creating Action Research (CAR) Proposal Using Learning Management System (LMS) Moodle

NASA Astrophysics Data System (ADS)

Muhtar, A. A.

2017-02-01

Online course can offer flexible and easy way to improve teachers’ competency in conducting education research, especially in classroom action research (CAR). Teachers can attend the course without physically present in the class. This research aims to (1) develop online course portal to improve teachers’ competency in creating CAR proposal, and (2) produce proper online course portal validated and evaluated from four aspects: learning process, content, graphic user interface and programming. Online course in this research developed using Learning Management System (LMS) Moodle. The research model is using modified Borg & Gall Research and Development (R&D) started from preliminary studies, designing product, creating product, and evaluation. Product validated by three experts from three universities. Research subjects for field test are seven teachers as participants from different schools in several provinces in Indonesia. Based on expert validation and field test results, the product developed in this research categorized as “very good” in all aspects and it is suitable for teacher to improve their competency in creating CAR proposal. Online course portal produced in this research can be used as a proper model for online learning in creating CAR proposal.

Mirage: a visible signature evaluation tool

NASA Astrophysics Data System (ADS)

Culpepper, Joanne B.; Meehan, Alaster J.; Shao, Q. T.; Richards, Noel

2017-10-01

This paper presents the Mirage visible signature evaluation tool, designed to provide a visible signature evaluation capability that will appropriately reflect the effect of scene content on the detectability of targets, providing a capability to assess visible signatures in the context of the environment. Mirage is based on a parametric evaluation of input images, assessing the value of a range of image metrics and combining them using the boosted decision tree machine learning method to produce target detectability estimates. It has been developed using experimental data from photosimulation experiments, where human observers search for vehicle targets in a variety of digital images. The images used for tool development are synthetic (computer generated) images, showing vehicles in many different scenes and exhibiting a wide variation in scene content. A preliminary validation has been performed using k-fold cross validation, where 90% of the image data set was used for training and 10% of the image data set was used for testing. The results of the k-fold validation from 200 independent tests show a prediction accuracy between Mirage predictions of detection probability and observed probability of detection of r(262) = 0:63, p < 0:0001 (Pearson correlation) and a MAE = 0:21 (mean absolute error).

Neuroimaging correlates of parent ratings of working memory in typically developing children

PubMed Central

Mahone, E. Mark; Martin, Rebecca; Kates, Wendy R.; Hay, Trisha; Horská, Alena

2009-01-01

The purpose of the present study was to investigate construct validity of parent ratings of working memory in children, using a multi-trait/multi-method design including neuroimaging, rating scales, and performance-based measures. Thirty-five typically developing children completed performance-based tests of working memory and nonexecutive function (EF) skills, received volumetric MRI, and were rated by parents on both EF-specific and broad behavior rating scales. After controlling for total cerebral volume and age, parent ratings of working memory were significantly correlated with frontal gray, but not temporal, parietal, or occipital gray, or any lobar white matter volumes. Performance-based measures of working memory were also moderately correlated with frontal lobe gray matter volume; however, non-EF parent ratings and non-EF performance-based measures were not correlated with frontal lobe volumes. Results provide preliminary support for the convergent and discriminant validity of parent ratings of working memory, and emphasize their utility in exploring brain–behavior relationships in children. Rating scales that directly examine EF skills may potentially have ecological validity, not only for “everyday” function, but also as correlates of brain volume. PMID:19128526

Study protocol for promoting respectful maternity care initiative to assess, measure and design interventions to reduce disrespect and abuse during childbirth in Kenya

PubMed Central

2013-01-01

Background Increases in the proportion of facility-based deliveries have been marginal in many low-income countries in the African region. Preliminary clinical and anthropological evidence suggests that one major factor inhibiting pregnant women from delivering at facility is disrespectful and abusive treatment by health care providers in maternity units. Despite acknowledgement of this behavior by policy makers, program staff, civil society groups and community members, the problem appears to be widespread but prevalence is not well documented. Formative research will be undertaken to test the reliability and validity of a disrespect and abuse (D&A) construct and to then measure the prevalence of disrespect and abuse suffered by clinic clients and the general population. Methods/design A quasi-experimental design will be followed with surveys at twelve health facilities in four districts and one large maternity hospital in Nairobi and areas before and after the introduction of disrespect and abuse (D&A) interventions. The design is aimed to control for potential time dependent confounding on observed factors. Discussion This study seeks to conduct implementation research aimed at designing, testing, and evaluating an approach to significantly reduce disrespectful and abusive (D&A) care of women during labor and delivery in facilities. Specifically the proposed study aims to: (i) determine the manifestations, types and prevalence of D&A in childbirth (ii) develop and validate tools for assessing D&A (iii) identify and explore the potential drivers of D&A (iv) design, implement, monitor and evaluate the impact of one or more interventions to reduce D&A and (v) document and assess the dynamics of implementing interventions to reduce D&A and generate lessons for replication at scale. PMID:23347548

Dichroic Filter for Separating W-Band and Ka-Band

NASA Technical Reports Server (NTRS)

Epp, Larry W.; Durden, Stephen L.; Jamnejad, Vahraz; Long, Ezra M.; Sosnowski, John B.; Higuera, Raymond J.; Chen, Jacqueline C.

2012-01-01

The proposed Aerosol/Cloud/Ecosystems (ACEs) mission development would advance cloud profiling radar from that used in CloudSat by adding a 35-GHz (Ka-band) channel to the 94-GHz (W-band) channel used in CloudSat. In order to illuminate a single antenna, and use CloudSat-like quasi-optical transmission lines, a spatial diplexer is needed to add the Ka-band channel. A dichroic filter separates Ka-band from W-band by employing advances in electrical discharge machining (EDM) and mode-matching analysis techniques developed and validated for designing dichroics for the Deep Space Network (DSN), to develop a preliminary design that both met the requirements of frequency separation and mechanical strength. First, a mechanical prototype was built using an approximately 102-micron-diameter EDM process, and tolerances of the hole dimensions, wall thickness, radius, and dichroic filter thickness measured. The prototype validated the manufacturing needed to design a dichroic filter for a higher-frequency usage than previously used in the DSN. The initial design was based on a Ka-band design, but thicker walls are required for mechanical rigidity than one obtains by simply scaling the Ka-band dichroic filter. The resulting trade of hole dimensions for mechanical rigidity (wall thickness) required electrical redesign of the hole dimensions. Updates to existing codes in the linear solver decreased the analysis time using mode-matching, enabling the electrical design to be realized quickly. This work is applicable to missions and instruments that seek to extend W-band cloud profiling measurements to other frequencies. By demonstrating a dichroic filter that passes W-band, but reflects a lower frequency, this opens up the development of instruments that both compare to and enhance CloudSat.

Preliminary Validation of a New Instrument to Measure Life Satisfaction in Adolescents with Neuromuscular Disorders.

ERIC Educational Resources Information Center

Reid, Denise T.; Renwick, Rebecca M.

1994-01-01

A new questionnaire instrument, the Life Satisfaction Index for Adolescents (LSIA), has been developed for adolescents with Duchenne muscular dystrophy (DMD). This article reviews the conceptual basis of the LSIA, its development, and its reliability and validity (established with 15 male adolescents with DMD). (DB)

Development and Validation of a Mathematics Anxiety Scale for Students

ERIC Educational Resources Information Center

Ko, Ho Kyoung; Yi, Hyun Sook

2011-01-01

This study developed and validated a Mathematics Anxiety Scale for Students (MASS) that can be used to measure the level of mathematics anxiety that students experience in school settings and help them overcome anxiety and perform better in mathematics achievement. We conducted a series of preliminary analyses and panel reviews to evaluate quality…

Concurrent Validity of the Online Version of the Keirsey Temperament Sorter II.

ERIC Educational Resources Information Center

Kelly, Kevin R.; Jugovic, Heidi

2001-01-01

Data from the Keirsey Temperament Sorter II online instrument and Myers Briggs Type Indicator (MBTI) for 203 college freshmen were analyzed. Positive correlations appeared between the concurrent MBTI and Keirsey measures of psychological type, giving preliminary support to the validity of the online version of Keirsey. (Contains 28 references.)…

Validation of Short-Term Noise Assessment Procedures: FY16 Summary of Procedures, Progress, and Preliminary Results

DTIC Science & Technology

Validation project. This report describes the procedure used to generate the noise models output dataset , and then it compares that dataset to the...benchmark, the Engineer Research and Development Centers Long-Range Sound Propagation dataset . It was found that the models consistently underpredict the

Spanish Translation and Validation of the Bracken Basic Concept Scale.

ERIC Educational Resources Information Center

Bracken, Bruce A; Fouad, Nadya

1987-01-01

The Bracken Basic Concept Scale (BBCS) was translated into Spanish, and 32 preschool and primary age bilingual children were assessed in a counter-balanced format with the English and newly translated Spanish forms to assess the adequacy of the translation. Preliminary content validity of the Spanish BBCS was demonstrated. (Author/JAZ)

Instrument Development and Validation of the Infant and Toddler Assessment for Quality Improvement

ERIC Educational Resources Information Center

Perlman, Michal; Brunsek, Ashley; Hepditch, Anne; Gray, Karen; Falenchuck, Olesya

2017-01-01

Research Findings: There is a growing need for accurate and efficient measures of classroom quality in early childhood education and care (ECEC) settings. Observational measures are costly, as their administration generally takes 3-5 hr per classroom. This article outlines the process of development and preliminary concurrent validity testing of…

Initial Development and Validation of the BullyHARM: The Bullying, Harassment, and Aggression Receipt Measure

ERIC Educational Resources Information Center

Hall, William J.

2016-01-01

This article describes the development and preliminary validation of the Bullying, Harassment, and Aggression Receipt Measure (BullyHARM). The development of the BullyHARM involved a number of steps and methods, including a literature review, expert review, cognitive testing, readability testing, data collection from a large sample, reliability…

[Development and validation of the Korean patient safety culture scale for nursing homes].

PubMed

Yoon, Sook Hee; Kim, Byungsoo; Kim, Se Young

2013-06-01

The purpose of this study was to develop a tool to evaluate patient safety culture in nursing homes and to test its validity and reliability. A preliminary tool was developed through interviews with focus group, content validity tests, and a pilot study. A nationwide survey was conducted from February to April, 2011, using self-report questionnaires. Participants were 982 employees in nursing homes. Data were analyzed using Cronbach's alpha, item analysis, factor analysis, and multitrait/multi-Item analysis. From the results of the analysis, 27 final items were selected from 49 items on the preliminary tool. Items with low correlation with total scale were excluded. The 4 factors sorted by factor analysis contributed 63.4% of the variance in the total scale. The factors were labeled as leadership, organizational system, working attitude, management practice. Cronbach's alpha for internal consistency was .95 and the range for the 4 factors was from .86 to .93. The results of this study indicate that the Korean Patient Safety Culture Scale has reliability and validity and is suitable for evaluation of patient safety culture in Korean nursing homes.

The Parting Parent Concern Inventory: Parents' appraisals correlate with divorced family functioning.

PubMed

Sanford, Keith; Rivers, Alannah Shelby

2017-10-01

When married parents go through a divorce, they may have concerns in 6 areas that are associated with postdivorce family adjustment. These include concerns about malice, power, custody, child rejection, esteem, and finances. The Parting Parent Concern Inventory assesses these concerns. It was developed in a series of preliminary studies, and this report focuses on results from 2 subsequent validation studies including 643 divorced parents with at least 1 child from their former marriage under the age of 18. Participants completed Internet assessments of their concerns and 14 different convergent validity criterion variables regarding aspects of child internalizing behavior, coparenting relationships, settlement outcomes, and personal well-being. Across both studies, the new measure of concerns fit an expected 6-dimensional factor structure. A total of 25 convergent validity correlations were tested, and all were significant. The distinctiveness of each concern scale was supported by the fact that all but 1 convergent association remained significant after controlling for variance explained by other concern scales. These results provide preliminary validation support for the new instrument. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Brief Report: Screening Tool for Autism in Two-Year-Olds (STAT): Development and Preliminary Data.

ERIC Educational Resources Information Center

Stone, Wendy L.; Coonrod, Elaine E.; Ousley, Opal Y.

2000-01-01

A study examined the validity of the Screening Tool for Autism in Two-Year-Olds (STAT) as a stage 2 screening instrument in a clinic-based sample of two-year-olds with autism (n=12) and with nonautistic developmental disorders (n=21). Results provide preliminary support for the utility of the STAT as an early screening of autism. (Contains…

Measuring the impact and distress of health problems from the individual's perspective: development of the Perceived Impact of Problem Profile (PIPP)

PubMed Central

Pallant, Julie F; Misajon, RoseAnne; Bennett, Elizabeth; Manderson, Lenore

2006-01-01

Background The aim of this study was to develop and conduct preliminary validation of the Perceived Impact of Problem Profile (PIPP). Based on the biopsychosocial model of health and functioning, the PIPP was intended as a generic research and clinical measurement tool to assess the impact and distress of health conditions from the individuals' perspective. The ICF classification system was used to guide the structure of the PIPP with subscales included to assess impact on self-care, mobility, participation, relationships and psychological well-being. While the ICF focuses on the classification of objective health and health related status, the PIPP broadens this focus to address the individuals' subjective experience of their health condition. Methods An item pool of 23 items assessing both impact and distress on five key domains was generated. These were administered to 169 adults with mobility impairment. Rasch analysis using RUMM2020 was conducted to assess the psychometric properties of each set of items. Preliminary construct validation of the PIPP was performed using the EQ5D. Results For both the Impact and Distress scales of the PIPP, the five subscales (Self-care, Mobility, Participation, Relationships, and Psychological Well-being) showed adequate psychometric properties, demonstrating fit to the Rasch model. All subscales showed adequate person separation reliability and no evidence of differential item functioning for sex, age, educational level or rural vs urban residence. Preliminary validity testing using the EQ5D items provided support for the subscales. Conclusion This preliminary study, using a sample of adults with mobility impairment, provides support for the psychometric properties of the PIPP as a potential clinical and research measurement tool. The PIPP provides a brief, but comprehensive means to assess the key ICF components, focusing on the individuals' perspective of the impact and distress caused by their health condition. Further validation of its use across different health conditions and varying cultural settings is required. PMID:16808842

A robust optimization methodology for preliminary aircraft design

NASA Astrophysics Data System (ADS)

Prigent, S.; Maréchal, P.; Rondepierre, A.; Druot, T.; Belleville, M.

2016-05-01

This article focuses on a robust optimization of an aircraft preliminary design under operational constraints. According to engineers' know-how, the aircraft preliminary design problem can be modelled as an uncertain optimization problem whose objective (the cost or the fuel consumption) is almost affine, and whose constraints are convex. It is shown that this uncertain optimization problem can be approximated in a conservative manner by an uncertain linear optimization program, which enables the use of the techniques of robust linear programming of Ben-Tal, El Ghaoui, and Nemirovski [Robust Optimization, Princeton University Press, 2009]. This methodology is then applied to two real cases of aircraft design and numerical results are presented.

Preliminary design package for prototype solar heating and cooling systems

NASA Technical Reports Server (NTRS)

1978-01-01

A summary is given of the preliminary analysis and design activity on solar heating and cooling systems. The analysis was made without site specific data other than weather; therefore, the results indicate performance expected under these special conditions. Major items include a market analysis, design approaches, trade studies and other special data required to evaluate the preliminary analysis and design. The program calls for the development and delivery of eight prototype solar heating and cooling systems for installation and operational test. Two heating and six heating and cooling units will be delivered for Single Family Residences, Multiple-family Residences and commercial applications.

Bioavailability and Pharmacodynamics of Promethazine in Human Subjects

NASA Technical Reports Server (NTRS)

Boyd, J. L.; Boster, B.; Wang, Z.; Shah, V.; Berens, K. L.; Sipes, W. E.; Anderson, K. E.; Putcha, L.

2004-01-01

The acute effects of exposure to microgravity include the development of space motion sickness, which usually requires therapeutic intervention. The current drug of choice, promethazine (PMZ), is available to astronauts in three different dosage forms during space flight; its side effects include nausea, dizziness, sedation and impaired psychomotor performance. This ground-based study is designed to validate flight-suitable methods for pharmacodynamic evaluation of PMZ and to estimate bioavailability and pharmacodynamics of PMZ. Experimental design consists of intramuscular administration of three doses of PMZ (12.5,25 and 50 mg) and placebo in a randomized double blind fashion to human subjects and collecting blood, urine and saliva samples for 72 h. Subjects also complete cognitive performance test batteries, WinSCAT (Windows based Space Cognitive Assessment Test) and ARES (ANAM Readiness Evaluation System). Preliminary results indicate a significant relationship (p=9.88e-05) between circulating PMZ levels and cognitive performance parameters. Time to accurately complete memory tasks increases significantly with concentrations; higher concentrations also increase response time and decrease accuracy of substitution and matching tasks. AUC and half-life estimates for PMZ ranged between 0.12 and 1.7 mg.h/L and 15 and 50 h, respectively. These preliminary results indicate that PMZ may exhibit dose-dependent pharmacokinetics in humans; also, WinSCAT and ARES are sensitive for pharmacodynamic assessment of PMZ, and may be applicable for assessing the pharmacodynamics of other neurocognitive drugs.

Social norms of "good" design: Interdisciplinary perspectives from a survey of engineers and clinicians in bioengineering.

PubMed

Johnson, Angela N

2016-08-01

In bioengineering training for new researchers and engineers, a great deal of time is spent discussing what constitutes "good" design. Conceptualization of good design, however, varies widely across interdisciplinary team members, with potential to both foster innovation or lead to unproductive conflict. To explore how groups central to bioengineering teams (physicians/clinicians and engineers/physicists) conceptualize good design, we asked 176 professionals in bioengineering to complete a comprehensive online survey including items designed to assess cognitive and moral foundations (validated MFQ30 tool) and custom items assessing perceptions on good design in three areas (good design characteristics, reputation of design approvers, and perceived design patient/consumer suitability). Of those that responded, 82 completed all quantitative survey sections and were included in this preliminary analysis. Correlations between response areas were examined to explore the possible links between cognitive and moral biases and perspectives on good design. The survey results indicated that both groups were more conservative than average Americans based on previous reports, and clinicians scored higher on average for all MFQ30 domains. Numerous significant correlations with good design were observed among clinicians, while engineers/physicists most closely correlated good design with prescriber approval and scientific/technical literature. The exploratory analysis demonstrated the potential utility of sociological frameworks to explore relationships in design thinking with potential utility to stimulate thriving conversation on team-based design thinking in bioengineering education and practice.

Preliminary design of a satellite observation system for Space Station Freedom

NASA Technical Reports Server (NTRS)

Cabe, Greg (Editor); Gallagher, Chris; Wilson, Brian; Rehfeld, James; Maurer, Alexa; Stern, Dan; Nualart, Jaime; Le, Xuan-Trang

1992-01-01

Degobah Satellite Systems (DSS), in cooperation with the University Space Research Association (USRA), NASA - Johnson Space Center (JSC), and the University of Texas, has completed the preliminary design of a satellite system to provide inexpensive on-demand video images of all or any portion of Space Station Freedom (SSF). DSS has narrowed the scope of the project to complement the work done by Mr. Dennis Wells at Johnson Space Center. This three month project has resulted in completion of the preliminary design of AERCAM, the Autonomous Extravehicular Robotic Camera, detailed in this design report. This report begins by providing information on the project background, describing the mission objectives, constraints, and assumptions. Preliminary designs for the primary concept and satellite subsystems are then discussed in detail. Included in the technical portion of the report are detailed descriptions of an advanced imaging system and docking and safing systems that ensure compatibility with the SSF. The report concludes by describing management procedures and project costs.

A Systems Analysis of the Library and Information Science Statistical Data System: The Preliminary Study. Interim Report.

ERIC Educational Resources Information Center

Hamburg, Morris; And Others

The long-term goal of this investigation is to design and establish a national model for a system of library statistical data. This is a report on The Preliminary Study which was carried out over an 11-month period ending May, 1969. The objective of The Preliminary Study was to design and delimit The Research Investigation in the most efficient…

28 CFR 2.48 - Revocation: Preliminary interview.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Revocation: Preliminary interview. 2.48....48 Revocation: Preliminary interview. (a) Interviewing officer. A parolee who is retaken on a warrant issued by a Commissioner shall be given a preliminary interview by an official designated by the Regional...

A demonstrator for an incoherent Doppler wind lidar receiver

NASA Astrophysics Data System (ADS)

Fabre, F.; Marini, A.; Sidler, Thomas C.; Morancais, Didier; Fongy, G.; Vidal, Ph.

2018-04-01

The knowledge of wind fields for a global terrestrial coverage and accurate altitude sampling is one of the main keys for improvement of meteorological predictions and general understanding of atmosphere behaviour. The best way to recover this information is remote sensing from space using low Earth orbit satellites. The measurement principle is to analyse the Doppler shift of the flux emitted by the space instrument and backscattered by the atmosphere. One of the most promising principle for Doppler shift measurement is the direct detection which does not need local oscillators. what significantly simplifies the design of such a space-borne receiver. ESA-ESTEC initiated at early 95' a programme called "lncoherent Doppler Wind Lidar (IDWL) technologies" for the study and bread-boarding phase. MMS won this contract proposing an original concept based on the use of a Fizeau high resolution interferometer working in the UV band. coupled with an intensified CCD. This concept is patented by MMS, as well as the special CCD timing sequence that will be depicted below. The programme begun by a study of the space-borne instrument in order to identify main constraints and define the receiver as could be for a flight model. A detailed performance model was established and parametric analysis allowed to optimise the concept in order to reach required performances. This study phase finally provided the definition of a bread-board for expected performances demonstration. Moreover, the Laser Signal Simulator (LSS) which is used to simulate the Lidar echo in term of amplitude as well as frequency modulation was defined at this step. The performances of this test support equipment are of main importance for the validation of the demonstrator design and performances. The second part of the study aimed at defining the derailed design of the demonstrator and associated test support equipment as well as initiating preliminary validation experiments on most critical technologies, like Fizeau interferometer which needs particularly high thermal stability and spectral resolution. At the end of this design phase. the test bench equipment begun to be manufactured and equipment test results preliminary assessed the study phase results. After integration, the correct operation and control of the overall test bench were assessed and performance tests were undertaken . The final conclusion of this programme aimed at up­dating the performance simulation software in order to refine expected performances for the future flight instrument.

Preliminary design study of quiet integral fan lift engines for VTOL transport applications in the 1980s

NASA Technical Reports Server (NTRS)

Rabone, G. R.; Paulson, E.

1973-01-01

Preliminary designs of three integral lift fan engines suitable for commercial certification in the 80's were completed. Emphasis was placed on low cost, simplicity, low noise, low emissions, minimum weight, and design features meeting all commercial standards for fire safety and containment.

Preliminary engineering report for design of a subscale ejector/diffuser system for high expansion ratio space engine testing

NASA Technical Reports Server (NTRS)

Wojciechowski, C. J.; Kurzius, S. C.; Doktor, M. F.

1984-01-01

The design of a subscale jet engine driven ejector/diffuser system is examined. Analytical results and preliminary design drawings and plans are included. Previously developed performance prediction techniques are verified. A safety analysis is performed to determine the mechanism for detonation suppression.

ICT and UD: Preliminary Study for Recommendations to Design Accessible University Courses.

PubMed

Pagliara, Silvio Marcello; Sánchez Utgé, Marta; De Anna, Lucia

2017-01-01

Starting from the Universal Design in the educational context principles, the experiences gained during the FIRB project "Net@ccessibility" and the high-education courses for teachers' specialization on special education, this research will focus on preliminary studies in order to define the recommendations for designing accessible university courses.

Preliminary design report for OTEC stationkeeping subsystems (SKSS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-12-12

Lockheed Ocean Systems with IMODCO prepared these preliminary designs for OTEC Stationkeeping Subsystems (SKSS) under contract to NOAA in support of the Department of Energy OTEC program. The results of Tasks III, V, and VI are presented in this design report. The report consists of five sections: introduction, preliminary designs for the multiple anchor leg (MAL) and tension anchor leg (TAL), costs and schedule, and conclusions. Extensive appendixes provide detailed descriptions of design methodology and include backup calculations and data to support the results presented. The objective of this effort is to complete the preliminary designs for the barge-MAL andmore » Spar-TAL SKSS. A set of drawings is provided for each which show arrangements, configuration, component details, engineering description, and deployment plan. Loads analysis, performance assessment, and sensitivity to requirements are presented, together with the methodology employed to analyze the systems and to derive the results presented. Life cycle costs and schedule are prepared and compared on a common basis. Finally, recommendations for the Commercial Plant SKSS are presented for both platform types.« less

Design Study for A Low-Cost LH2 Turbopump

NASA Technical Reports Server (NTRS)

Japikse, David; Baines, Nicholas; Platt, Michael J.

2000-01-01

A preliminary design study, focusing on potential component selections and design for manufacturing and assembly (DFMAR1) analysis, is presented in this study. The investigation focused on a nominal cost liquid hydrogen turbopump suitable for a private launch class vehicle. Utilizing a "turbocharger-like" design philosophy, preliminary feasibility studies of the basic pump design class, the rotordynamic design class, and the turbine design class were conducted with associated DFMA evaluations. Reasonable cost levels and sensible levels of product assurance have been established.

Structural and Aerodynamic Optimization of UltraLightweight Technology for Research in Astronomy (ULTRA)

NASA Astrophysics Data System (ADS)

Etzel, P. B.; Martin, R.; Romeo, R.; Fesen, R.; Hale, R.; Taghavi, R.; Anthony-Twarog, B. J.; Shawl, S. J.; Twarog, B. A.

2004-12-01

The focus of ULTRA (see poster by Twarog et al.) is a three-year plan to develop and test ultralightweight technology for research applications in astronomy. The goal is to demonstrate that a viable alternative exists to traditional glass-mirror technology by designing, fabricating, and testing a research telescope prototype comprising fiber reinforced plastic (CFRP) materials. To date, several mirror designs have been tested. The main goal in the first year has been to develop a 0.4m diameter mirror and OTA that serve as prototypes for the 1m telescope design. Mirrors of 0.4m diameter have been successfully fabricated which yield diffraction limited images. This poster will include a display of the complete OTA (including optics), optics test results, and astronomical images taken with prototype mirrors. Finite element analysis has been used to evaluate the OTA and mirror designs. Preliminary design details were incorporated in a knowledge-based system. Adaptive Modeling Language (AML), an object oriented programming language developed by Technosoft, Inc., was used to develop a parameterized geometric model of the preliminary design. The system can generate mirrors with radials/circumferentials, tube core substructures, as well as modeling the support structure. Computational fluid dynamics analyses were performed for sweep, inclination and ambient wind speed. Finite element analyses were performed for core density and arrangement, skin thickness, back-surface curvature, spider configuration and arrangement of the OTA, while the loading conditions considered thus far are thermal, inertial, and aerodynamic pressure loads. Experimental tests, including ultrasonic nondestructive evaluations, infrared imaging, modal testing, and wind tunnel tests, have been performed on the first prototype mirror, with the primary goal of validating analytical models and identifying potential manufacturing induced variations to be expected among "like" mirrors. Support of this work by NSF grants AST-0320784 and AST-0321247, NASA grant NCC5-600, Kansas University, and San Diego State University is gratefully acknowledged

Vestibular Function Research (VFR) experiment. Phase B: Design definition study

NASA Technical Reports Server (NTRS)

1978-01-01

The Vestibular Functions Research (VFR) Experiment was established to investigate the neurosensory and related physiological processes believed to be associated with the space flight nausea syndrome and to develop logical means for its prediction, prevention and treatment. The VFR Project consists of ground and spaceflight experimentation using frogs as specimens. The phase B Preliminary Design Study provided for the preliminary design of the experiment hardware, preparation of performance and hardware specification and a Phase C/D development plan, establishment of STS (Space Transportation System) interfaces and mission operations, and the study of a variety of hardware, experiment and mission options. The study consist of three major tasks: (1) mission mode trade-off; (2) conceptual design; and (3) preliminary design.

OA Go Away: Development and Preliminary Validation of a Self-Management Tool to Promote Adherence to Exercise and Physical Activity for People with Osteoarthritis of the Hip or Knee

PubMed Central

Toupin April, Karine; Backman, Catherine; Tugwell, Peter

2016-01-01

Purpose: To determine the face and content validity, construct validity, and test–retest reliability of the OA Go Away (OGA), a personalized self-management tool to promote adherence to exercise and physical activity for people with osteoarthritis (OA) of the hip or knee. Methods: The face and content validity of OGA version 1.0 were determined via interviews with 10 people with OA of the hip or knee and 10 clinicians. A revised OGA version 2.0 was then tested for construct validity and test–retest reliability with a new sample of 50 people with OA of the hip or knee by comparing key items in the OGA journal with validated outcome measures assessing similar health outcomes and comparing scores on key items of the journal 4–7 days apart. Face and content validity were then confirmed with a new sample of 5 people with OA of the hip or knee and 5 clinicians. Results: Eighteen of 30 items from the OGA version 1.0 and 41 of 43 items from the OGA version 2.0 journal, goals and action plan, and exercise log had adequate content validity. Construct validity and test–retest reliability were acceptable for the main items of the OGA version 2.0 journal. The OGA underwent modifications based on results and participant feedback. Conclusion: The OGA is a novel self-management intervention and assessment tool for people with OA of the hip or knee that shows adequate preliminary measurement properties. PMID:27909359

Design, Realization, and First Validation of an Immersive Web-Based Virtual Patient Simulator for Training Clinical Decisions in Surgery.

PubMed

Kleinert, Robert; Heiermann, Nadine; Wahba, Roger; Chang, De-Huan; Hölscher, Arnulf H; Stippel, Dirk L

2015-01-01

Immersive patient simulators (IPS) allow an illusionary immersion into a synthetic world where the user can freely navigate through a 3-dimensional environment similar to computer games. Playful learning with IPS allows internalization of medical workflows without harming real patients. Ideally, IPS show high student acceptance and can have positive effect on knowledge gain. Development of IPS with high technical quality is resource intensive. Therefore most of the "high-fidelity" IPS are commercially driven. Usage of IPS in the daily curriculum is still rare. There is no academic-driven simulator that is freely accessible to every student and combines high immersion grade with a profound amount of medical content. Therefore it was our aim to develop an academic-driven IPS prototype that is free to use and combines a high immersion grade with profound medical content. In addition, a first validation of the prototype was conducted. The conceptual design included definition of the following parameters: amount of curricular content, grade of technical quality, availability, and level of validation. A preliminary validation was done with 25 students. Students' opinion about acceptance was evaluated by a Likert-scale questionnaire. Effect on knowledge gain was determined by testing concordance and predictive validity. A custom-made simulator prototype (Artificial learning interface for clinical education [ALICE]) displays a virtual clinic environment that can be explored from a first-person view similar to a video game. By controlling an avatar, the user navigates through the environment, is able to treat virtual patients, and faces the consequence of different decisions. ALICE showed high students' acceptance. There was positive correlation for concordance validity and predictive validity. Simulator usage had positive effect on reproduction of trained content and declarative knowledge. We successfully developed a university-based, IPS prototype (ALICE) with profound medical content. ALICE is a nonprofit simulator, easy to use, and showed high students' acceptance; thus it potentially provides an additional tool for supporting student teaching in the daily clinical curriculum. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Development of Cold-Formed Steel Seismic Design Recommendations

DTIC Science & Technology

2015-08-01

applied loads, so the impact on design would be minimal. However, had the test been carried out to larger panel deformations without loss of capacity... test shear panels and development of preliminary design recommendations 6. Definition of material properties and coupon test results 7. Pretest of...predicted panel response based on preliminary design model and coupon test results 8. Definition of test configuration, procedures, and

Multidisciplinary design and optimization (MDO) methodology for the aircraft conceptual design

NASA Astrophysics Data System (ADS)

Iqbal, Liaquat Ullah

An integrated design and optimization methodology has been developed for the conceptual design of an aircraft. The methodology brings higher fidelity Computer Aided Design, Engineering and Manufacturing (CAD, CAE and CAM) Tools such as CATIA, FLUENT, ANSYS and SURFCAM into the conceptual design by utilizing Excel as the integrator and controller. The approach is demonstrated to integrate with many of the existing low to medium fidelity codes such as the aerodynamic panel code called CMARC and sizing and constraint analysis codes, thus providing the multi-fidelity capabilities to the aircraft designer. The higher fidelity design information from the CAD and CAE tools for the geometry, aerodynamics, structural and environmental performance is provided for the application of the structured design methods such as the Quality Function Deployment (QFD) and the Pugh's Method. The higher fidelity tools bring the quantitative aspects of a design such as precise measurements of weight, volume, surface areas, center of gravity (CG) location, lift over drag ratio, and structural weight, as well as the qualitative aspects such as external geometry definition, internal layout, and coloring scheme early in the design process. The performance and safety risks involved with the new technologies can be reduced by modeling and assessing their impact more accurately on the performance of the aircraft. The methodology also enables the design and evaluation of the novel concepts such as the blended (BWB) and the hybrid wing body (HWB) concepts. Higher fidelity computational fluid dynamics (CFD) and finite element analysis (FEA) allow verification of the claims for the performance gains in aerodynamics and ascertain risks of structural failure due to different pressure distribution in the fuselage as compared with the tube and wing design. The higher fidelity aerodynamics and structural models can lead to better cost estimates that help reduce the financial risks as well. This helps in achieving better designs with reduced risk in lesser time and cost. The approach is shown to eliminate the traditional boundary between the conceptual and the preliminary design stages, combining the two into one consolidated preliminary design phase. Several examples for the validation and utilization of the Multidisciplinary Design and Optimization (MDO) Tool are presented using missions for the Medium and High Altitude Long Range/Endurance Unmanned Aerial Vehicles (UAVs).

Quasi-steady aerodynamic model of clap-and-fling flapping MAV and validation using free-flight data.

PubMed

Armanini, S F; Caetano, J V; Croon, G C H E de; Visser, C C de; Mulder, M

2016-06-30

Flapping-wing aerodynamic models that are accurate, computationally efficient and physically meaningful, are challenging to obtain. Such models are essential to design flapping-wing micro air vehicles and to develop advanced controllers enhancing the autonomy of such vehicles. In this work, a phenomenological model is developed for the time-resolved aerodynamic forces on clap-and-fling ornithopters. The model is based on quasi-steady theory and accounts for inertial, circulatory, added mass and viscous forces. It extends existing quasi-steady approaches by: including a fling circulation factor to account for unsteady wing-wing interaction, considering real platform-specific wing kinematics and different flight regimes. The model parameters are estimated from wind tunnel measurements conducted on a real test platform. Comparison to wind tunnel data shows that the model predicts the lift forces on the test platform accurately, and accounts for wing-wing interaction effectively. Additionally, validation tests with real free-flight data show that lift forces can be predicted with considerable accuracy in different flight regimes. The complete parameter-varying model represents a wide range of flight conditions, is computationally simple, physically meaningful and requires few measurements. It is therefore potentially useful for both control design and preliminary conceptual studies for developing new platforms.

Applying innovative approach “Nature of Science (NoS) within inquiry” for developing scientific literacy in the student worksheet

NASA Astrophysics Data System (ADS)

Widowati, A.; Anjarsari, P.; Zuhdan, K. P.; Dita, A.

2018-03-01

The challenges of the 21st century require innovative solutions. Education must able to make an understanding of science learning that leads to the formation of scientific literacy learners. This research was conducted to produce the prototype as science worksheet based on Nature of Science (NoS) within inquiry approach and to know the effectiveness its product for developing scientific literacy. This research was the development and research design, by pointing to Four D models and Borg & Gall Model. There were 4 main phases (define, design, develop, disseminate) and additional phases (preliminary field testing, main product revision, main field testing, and operational product revision). Research subjects were students of the junior high school in Yogyakarta. The instruments used included questionnaire sheet product validation and scientific literacy test. For the validation data were analyzed descriptively. The test result was analyzed by an N-gain score. The results showed that the appropriateness of worksheet applying NoS within inquiry-based learning approach is eligible based on the assessment from excellent by experts and teachers, students’ scientific literacy can improve high category of the N-gain score at 0.71 by using student worksheet with Nature of Science (NoS) within inquiry approach.

NASA Aeroelasticity Handbook Volume 2: Design Guides Part 2

NASA Technical Reports Server (NTRS)

Ramsey, John K. (Editor)

2006-01-01

The NASA Aeroelasticity Handbook comprises a database (in three formats) of NACA and NASA aeroelasticity flutter data through 1998 and a collection of aeroelasticity design guides. The Microsoft Access format provides the capability to search for specific data, retrieve it, and present it in a tabular or graphical form unique to the application. The full-text NACA and NASA documents from which the data originated are provided in portable document format (PDF), and these are hyperlinked to their respective data records. This provides full access to all available information from the data source. Two other electronic formats, one delimited by commas and the other by spaces, are provided for use with other software capable of reading text files. To the best of the author s knowledge, this database represents the most extensive collection of NACA and NASA flutter data in electronic form compiled to date by NASA. Volume 2 of the handbook contains a convenient collection of aeroelastic design guides covering fixed wings, turbomachinery, propellers and rotors, panels, and model scaling. This handbook provides an interactive database and design guides for use in the preliminary aeroelastic design of aerospace systems and can also be used in validating or calibrating flutter-prediction software.