Science.gov

Sample records for preliminary press conference

  1. Lyndon Johnson's Press Conferences.

    ERIC Educational Resources Information Center

    Cooper, Stephen

    Because President Lyndon Johnson understood well the publicity value of the American news media, he sought to exploit them. He saw reporters as "torch bearers" for his programs and policies and used the presidential press conference chiefly for promotional purposes. Although he met with reporters often, his press conferences were usually…

  2. Hot isostatic pressing: Conference proceedings

    SciTech Connect

    Froes, F.H.; Hebeisen, J.; Widmer, R.

    1996-12-31

    The International Conference on Hot Isostatic Pressing was held on May 20-22, 1996, in Andover, Massachusetts. This conference discussed the state-of-the-art of hot isostatic pressing (HIP) and competing compaction techniques. HIP allows complex cost-effective near net shapes to be produced from powder products, densification of castings thereby enhancing performance, retention of metastable structures such as nano-sized grains, and even creative food processing. Sections in the conference covered such items as fundamentals, mathematical modeling, equipment and instrumentation, advanced materials and processes, composite materials, casting densification, surface treatments, HIP bonding, and competing technologies. Forty five papers were processed separately for inclusion on the data base.

  3. Apollo 13 Facts: Press Conference

    NASA Technical Reports Server (NTRS)

    2001-01-01

    Flight Director Gene Krantz gives an overview of the Apollo 13 mission as corrections are made in the power down checklist, passive thermal control, and orbital burns after the spacecraft runs into problems. He then answers questions from the press with the help of Tony England, Bill Peters, and Dick Thorson. Footage then shows newspaper headlines 'We're Not Concerned' and 'Getting Ready to Land' as people watch televisions to see if the astronauts landed safely. The press conference section of this video has sound, the headlines section does not.

  4. Apollo 11 preflight press conference

    NASA Technical Reports Server (NTRS)

    1969-01-01

    The three prime crewmen of the Apollo 11 lunar landing mission participate in a pre-flight press conference in the bldg 1 auditorium on July 5, 1969. Left to right, are Astronauts Neil A. Armstrong, commander; Edwin E. Aldrin Jr., lunar module pilot; and Michael Collins, command module pilot. The box-like enclosure surrounding the three astronauts was part of elaborate precautions in effect to reduce the possibility of exposing the crewmen to infectious disease in the preflight period.

  5. Mars Observer Press Conference JPL

    NASA Technical Reports Server (NTRS)

    1993-01-01

    The Mars Observer mission spacecraft was primarily designed for exploring Mars and the Martian environment. The Mars Observer was launched on September 25, 1992. The spacecraft was lost in the vicinity of Mars on August 21, 1993 when the spacecraft began its maneuvering sequence for Martian orbital insertion. This videotape shows a press briefing, held after the spacecraft had not responded to attempts to communicate with it, to explain to the press the problems and the steps that were being taken to re-establish communication with the spacecraft. The communications had been shutdown prior to the orbital insertion burn to protect the instruments. At the time of the press conference, the communications system was still not operational, and attempts were being made to re-establish communication. Bob McMillan of the Public Affairs Office at JPL gives the initial announcement of the continuing communication problem with the spacecraft. Mr. McMillan introduces William Piotrowski, acting director of solar system exploration, who reiterates that there is indeed no communication with the Observer spacecraft. He is followed by Glenn Cunningham, the Project Manager of the Mars Observer who speaks about the attempts to re-establish contact. Mr. Cunningham is followed by Satenios Dallas, the Mission Manager for the Mars Observer Project, who speaks about the sequence of events leading up to the communication failure, and shows an animated video presenting the orbital insertion maneuvers. The briefing was then opened up for questions from the assembled press, both at JPL and at the other NASA Centers. The questions are about the possible reasons for the communication failure, and the attempts to restore communications with the spacecraft. Dr. Arden L. Albee, chief scientist for the Mars Observer Mission, joins the other panel members to answer questions. At the end of the press briefing the animation of the Mars orbital insertion is shown again.

  6. STS-8 onboard crew press conference

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Six news reporters listen to a response from Astronaut Guion S. Bluford (note TV monitor) in a rare space-to-Earth press conference involving all the STS-8 crew. The participants are, left to right, Gary Schwitzer, Cable News Network; Morton Dean, CBS; Roy Neal, NBC; Lynn Sherr, ABC; Howard Benedict, Associated Press; Al Rossiter, United Press International. The astronauts on the monitor are Richard H. Truly, cneter left, crew commander; Daniel C. Brandenstein, lower left, pilot; and Dr. William E. Thornton, upper left, Guion S. Bluford, upper right; and Dale E. Gardner, all mission specialists.

  7. STS-114: Discovery Launch Readiness Press Conference

    NASA Technical Reports Server (NTRS)

    2005-01-01

    Michael Griffin, NASA Administrator; Wayne Hale, Space Shuttle Deputy Program Manager; Mike Wetmore, Director of Shuttle Processing; and 1st Lieutenant Mindy Chavez, Launch Weather Officer-United States Air Force 45th Weather Squadron are in attendance for this STS-114 Discovery launch readiness press conference. The discussion begins with Wayne Hale bringing to the table a low level sensor device for everyone to view. He talks in detail about all of the extensive tests that were performed on these sensors and the completion of these ambient tests. Chavez presents her weather forecast for the launch day of July 26th 2005. Michael Griffin and Wayne Hale answer questions from the news media pertaining to the sensors and launch readiness. The video ends with footage of Pilot Jim Kelly and Commander Eileen Collins conducting test flights in a Shuttle Training Aircraft (STA) that simulates Space Shuttle landing.

  8. STS-114: Discovery Post MMT Press Conference

    NASA Technical Reports Server (NTRS)

    2005-01-01

    Bruce Buckingham of NASA Public Affairs hosted this press conference. Wayne Hill, Space Shuttle Deputy Program Manager; John Muratore, Shuttle Systems and Integration Manager; Mike Wetmore, Director for Shuttle Processing were present. Wayne started with a video from Shuttle Logistics Depot showing details of a point sensor box commonly named the black box. Work with the trouble shooting continues on a day to day basis, no definite launching date is set. John reports that they are in a mission support mode all over the country until the sensor problem is solved. Mike reports his team will complete scrub and securing tasks through the next day, restore the facility to its normal mode, and will start to a four day process of getting back to launch once trouble shooting is completed. Tanking test, thermal environment, problem identification, engine cut-off sensor problems, sensors, risk, design reviews, test and analysis, correlation of the problem with Columbia, are some of the topics covered with the News media.

  9. Gemini 10 prime crew during post flight press conference

    NASA Technical Reports Server (NTRS)

    1966-01-01

    At podium during Gemini 10 press conference are (l-r) Dr. Robert C. Seamans, Astronauts John Young and Michael Collins and Dr. Robert R. Gilruth (39895); Wide angle view of the Manned Spacecraft Center (MSC) News Center during the Gemini 10 prime crew post flight press conference (38786); Astronaut Young draws diagram on chalk board of tethered extravehicular activity accomplished during Gemini 10 flight (39897).

  10. Gemini 8 prime and backup crews during press conference

    NASA Technical Reports Server (NTRS)

    1966-01-01

    Gemini 8 prime and backup crews during press conference. Left to right are Astronauts David R. Scott, prime crew pilot; Neil A. Armstrong, prime crew command pilot; Charles Conrad Jr., backup crew command pilot; and Richard F. Gordon Jr., backup crew pilot.

  11. Relation of Questions and Answers in Kennedy's Press Conferences.

    ERIC Educational Resources Information Center

    Ostman, Ronald E.; And Others

    1981-01-01

    Analyzes the questions posed by reporters and the answers given by President John F. Kennedy in his formal press conferences. Concludes that questions that followed the rules for interviewing set forth by experts produced better answers than those that did not follow rules. (FL)

  12. STS-114: Discovery Post MMT Press Conference

    NASA Technical Reports Server (NTRS)

    2005-01-01

    Bruce Buckingham, NASA Public Affairs hosted this conference. Bill Parsons, Space Shuttle Program Manager; John Muratore, Shuttle System and Integration Manager; Mike Wetmore, Shuttle Processing Director were present. The Panel summarizes that thorough effort of analysis and test techniques and great amount of work is being done to fix the sensor problem and will be ready to call the stations for a launch countdown process after the trouble shooting is fully completed. Launch time, grounding problem, sensor failure, trouble shooting, tanking test, pin swap, and heaters were topics covered with the News media. For clarification, Bruce Buckingham provided information that preferred launch time is at 10:39am on July 26, Eastern Time.

  13. Apollo 11 Facts Project [Prelaunch Press Conference/EVA Training

    NASA Technical Reports Server (NTRS)

    1994-01-01

    A prelaunch press conference shows the crewmembers of Apollo 11, Commander Neil A. Armstrong, Lunar Module Pilot Edwin E. Aldrin, Jr., and Command Module Pilot Michael Collins, answering questions about their upcoming mission (this section has sound, the rest of the video is without sound). Footage is seen of the crew during training for the extravehicular activity portion of the mission and using the flight simulator.

  14. STS-121: Discovery Entry Flight Director Post Landing Press Conference

    NASA Technical Reports Server (NTRS)

    2006-01-01

    Steve Stitch, STS-121 Entry Flight Director, and Wayne Hale, Space Shuttle Program is shown in this post landing press conference. Steve Stitch begins with discussing the following topics: 1) Weather at Kennedy Space Center; 2) Gap filler protrusion; 3) De-orbit burn; 4) Space Shuttle Landing; 5) Global Position Satellite System (GPSS) performance; and 6) Post-landing rain showers. Wayne Hale discusses external tank observations at launch and the goals that were obtained by this flight, which are to deliver 4000 pounds of scientific equipment, increase the crew members to three on the International Space Station (ISS), and repair the ISS. Questions from the press on lessons learned from the Auxiliary Power Unit (APU) leak, and flight readiness reviews are addressed.

  15. Galileo Earth/Moon 2 Press Conference Live from JPL

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The end of a press conference and short views of the Earth from the two Earth-Moon flybys of the Galileo spacecraft are presented. An audio playback of the Plasma Wave Instrument is also presented. The views of the Earth are from December 11, 1990, December 8, 1992 and December 22, 1992. The views from December 11, 1990 show panoramic views of the Earth as seen from space, the views from December 8, 1992 show close-up views of the Earth, and the views from December 22, 1992 include some simulations from the views taken on December 8, 1992.

  16. 29 CFR 1955.31 - Preliminary conference.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 9 2012-07-01 2012-07-01 false Preliminary conference. 1955.31 Section 1955.31 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... those not disposed of by admissions or agreements, and control the subsequent course of the...

  17. 29 CFR 1955.31 - Preliminary conference.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 29 Labor 9 2010-07-01 2010-07-01 false Preliminary conference. 1955.31 Section 1955.31 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... those not disposed of by admissions or agreements, and control the subsequent course of the...

  18. 29 CFR 1955.31 - Preliminary conference.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 9 2013-07-01 2013-07-01 false Preliminary conference. 1955.31 Section 1955.31 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... those not disposed of by admissions or agreements, and control the subsequent course of the...

  19. Gemini 11 Commander Conrad and Pilot Gordon at post flight press conference

    NASA Technical Reports Server (NTRS)

    1966-01-01

    Gemini 11 Commander Charles Conrad, Jr (left) and Pilot Richard F. Gordon, Jr describe mission activities during their post flight press conference at JSC. Gordon at the microphone talks about the extravehicular activity (EVA) photo projected behind the two crewmembers. During the EVA Gordon attached a tether to the Agena and retrieved a nuclear emulsion experiment package.

  20. Press conference bring excitement of geophysical research to the public

    NASA Astrophysics Data System (ADS)

    Leifert, Harvey

    “A Flare to Remember.” “Starbucks for Starfish.” “Earth's Rotation Slows for El Niño.” What do these catchy headlines have in common? They all resulted from presentations at AGU's Spring Meeting in Boston, Mass. Yes, geophysical science can be big news when presented in a way that is interesting to general audiences.Proof? Well, the “Flare to Remember” headline (in the Dallas Morning News) reported the discovery, via the SOHO spacecraft, that a solar flare had produced, deep inside the Sun, seismic disturbances of a magnitude never experienced on Earth. Researchers Valentina Zharkova of Glasgow University and Alexander Kosovichev of Stanford gave media representatives a preview of their session, supported by visual aids, in the AGU press briefing room.

  1. STS-32 crewmembers pose with LDEF model at T-30 press conference

    NASA Technical Reports Server (NTRS)

    1989-01-01

    STS-32 crewmembers pose with a model of the Long Duration Exposure Facility (LDEF) at T-30 preflight press conference in the JSC Auditorium and Public Affairs Facility Bldg 2. From right to left are Mission Specialist (MS) G. David Low, MS Marsha S. Ivins, MS Bonnie J. Dunbar, Pilot James D. Wetherbee, and Commander Daniel C. Brandenstein standing behind a LDEF scale model and in front of a mural of a space shuttle launch.

  2. Press conference

    ScienceCinema

    None

    2016-07-12

    Exposés de plusieurs intervenants de la direction et du conseil, comme le Prof.Ramsey, président du conseil sur l'adhésion récente de la Finlande et le "boom" scientifique des pays de l'est.

  3. AC-67/FLTSATCOM Launch with Isolated Cam Views/ Freeze of Lightning/ Press Conference

    NASA Technical Reports Server (NTRS)

    1987-01-01

    The FLTSATCOM system provides worldwide, high-priority UHF communications between naval aircraft, ships, submarines, and ground stations and between the Strategic Air Command and the national command authority network. This videotape shows the attempted launch of the 6th member of the satellite system on an Atlas Centaur rocket. Within a minute of launch a problem developed. The initial sign of the problem was the loss of telemetry data. The videotape shows three isolated views of the launch, and then a freeze shot of a lightning strike shortly after the launch. The tape then shows a press conference, with Mr. Wolmaster, Mr. Gibbs, and Air Force Colonel Alsbrooke. Mr. Gibbs summarizes the steps that would be taken to review the launch failure. The questions from the press mostly concern the weather conditions, and the possibility that the weather might have caused the mission failure.

  4. Mock Press Conference with San Diego Deputy Mayor Jady McCarty: A Visual Communication "Event" Created for News Writing Students.

    ERIC Educational Resources Information Center

    Sneed, Don; Wulfemeyer, K. Tim

    A videotape program was designed for use in news writing classes to provide journalism students with exposure to and experience in covering press conferences. The mock press conference format was selected because an analysis of journalism textbooks revealed little attention to this topic, and it was decided that an elected public official from the…

  5. [Preliminary evaluation of Chile's First Citizen Consensus Conference].

    PubMed

    Pellegrini Filho, Alberto; Zurita, Laura

    2004-05-01

    This piece provides an initial assessment of the First Citizen Consensus Conference, an event held in the city of Santiago, Chile, from 22-24 November 2003, on the subject of "The Management of My Medical Record." This conference was the first citizen consensus conference that has been held in Chile as well as the first such conference in Latin America. Consensus conferences were devised by the Danish Board of Technology in 1987 as a way to assess science and technology issues through discussions between experts and a panel of lay persons. At the end of a consensus conference, the lay persons express their opinions and recommendations in a consensus report that is directed at policymakers, decision-makers, and the public in general. The objective of a consensus conference is to bridge the gaps that routinely exist among the general public, experts, and elected officials. So far, the Danish Board of Technology has organized more than 20 of these conferences, using a methodology that has become established as a model. Taking into account the changes that have occurred in the relationship between science and society at large, the Pan American Health Organization has decided to support the holding of consensus conferences in Latin America and the Caribbean. The First Citizen Consensus Conference adapted the Danish methodology to conditions in Chile, and this piece assesses the modifications that were made. In addition, some 6 to 12 months after the conference, there will be an external evaluation of the outcomes and impact of the conference, especially in the communications media, public debate, decision-making, and perceptions of the persons who were involved. Despite the criticisms made in this piece and some shortcomings that are pointed out, the First Citizen Consensus Conference achieved all of its objectives and will serve as an excellent model for similar conferences in other countries of the Americas. PMID:15231085

  6. [Preliminary evaluation of Chile's First Citizen Consensus Conference].

    PubMed

    Pellegrini Filho, Alberto; Zurita, Laura

    2004-05-01

    This piece provides an initial assessment of the First Citizen Consensus Conference, an event held in the city of Santiago, Chile, from 22-24 November 2003, on the subject of "The Management of My Medical Record." This conference was the first citizen consensus conference that has been held in Chile as well as the first such conference in Latin America. Consensus conferences were devised by the Danish Board of Technology in 1987 as a way to assess science and technology issues through discussions between experts and a panel of lay persons. At the end of a consensus conference, the lay persons express their opinions and recommendations in a consensus report that is directed at policymakers, decision-makers, and the public in general. The objective of a consensus conference is to bridge the gaps that routinely exist among the general public, experts, and elected officials. So far, the Danish Board of Technology has organized more than 20 of these conferences, using a methodology that has become established as a model. Taking into account the changes that have occurred in the relationship between science and society at large, the Pan American Health Organization has decided to support the holding of consensus conferences in Latin America and the Caribbean. The First Citizen Consensus Conference adapted the Danish methodology to conditions in Chile, and this piece assesses the modifications that were made. In addition, some 6 to 12 months after the conference, there will be an external evaluation of the outcomes and impact of the conference, especially in the communications media, public debate, decision-making, and perceptions of the persons who were involved. Despite the criticisms made in this piece and some shortcomings that are pointed out, the First Citizen Consensus Conference achieved all of its objectives and will serve as an excellent model for similar conferences in other countries of the Americas.

  7. Press abstracts of the 21st Lunar and Planetary Science Conference

    NASA Technical Reports Server (NTRS)

    1990-01-01

    The Program Committee for the Twenty-fisrt Lunar and Planetary Science Conference has chosen these contributions as having the greatest potential interest for the general public. The papers in this collection were written for general presentation, avoiding jargon and unnecessarily complex terms. More technical abstracts will be found in Lunar and Planetary Science XXI. Representative titles are: Ancient Ocean-Land-Atmosphere Interactions on Mars: Global Model and Geological Evidence; Oxygen Isotopic Compositions of Ordinary Chondrites and Their Chondrules; Exposure Ages and Collisional History of L-Chondrite Parent Bodies; Models of Solar-Powered Geysers on Triton; and Search for Life: A Science Rationale for a Permanent Base on Mars.

  8. Press releases, preliminary maps, and preliminary reports released by the Geologic Branch and Alaskan Branch between January 1, 1938 and January 1, 1945

    USGS Publications Warehouse

    Kent, Lois S.; Keroher, R.P.

    1945-01-01

    This pamphlet contains a complete list of all maps and reports issued by the Geologic Branch and Alaskan Branch of the Geological Survey whose release was announced by press notice during the period between January 1, 1938 and January 1, 1945. The Geologic Branch material was compiled by Lois S. Kent, and the Alaskan Branch material by R. P. Kerocher. It is expected that similar lists will be published annually hereafter. These reports and maps are the results of work carried out by Survey geologists on mineral deposits in the United States, Alaska, and Cuba during the war and the years immediately preceding the war. They were released in preliminary form as rapidly as possible in this period to avoid the delays necessarily attendant upon formal publication and to make the information contained in them promptly available to property owners and mine operators concerned with the production of strategic and critical mineral commodities.

  9. Mars Observer Press Conference

    NASA Technical Reports Server (NTRS)

    1993-01-01

    Footage shows Bob MacMillin, NASA's Public Information Office, as he introduces the Mars Observer Project Manager, Glen Cunningham. Glen is shown addressing the current status of the Mars Observer communication system, the inability of NASA to establish contact, and the action that is currently being taken to establish contact with the spacecraft. Glen is also seen answering questions from both the audience as well as other NASA Centers.

  10. A Guide to Press Relations.

    ERIC Educational Resources Information Center

    Fibre Box Association, Chicago, IL.

    Stressing that a positive press-relations program can be extremely helpful to businesses, this publication offers suggestions for establishing press contacts, preparing press releases, holding press conferences, illustrating a story, preparing materials for use in radio and television broadcasts, and developing policies to be followed in emergency…

  11. Copper Mountain conference on multigrid methods. Preliminary proceedings -- List of abstracts

    SciTech Connect

    1995-12-31

    This report contains abstracts of the papers presented at the conference. Papers cover multigrid algorithms and applications of multigrid methods. Applications include the following: solution of elliptical problems; electric power grids; fluid mechanics; atmospheric data assimilation; thermocapillary effects on weld pool shape; boundary-value problems; prediction of hurricane tracks; modeling multi-dimensional combustion and detailed chemistry; black-oil reservoir simulation; image processing; and others.

  12. Corneal tissue water content mapping with THz imaging: preliminary clinical results (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Sung, Shijun; Bajwa, Neha; Deng, Sophie X.; Taylor, Zachary; Grundfest, Warren

    2016-03-01

    Well-regulated corneal water content is critical for ocular health and function and can be adversely affected by a number of diseases and injuries. Current clinical practice limits detection of unhealthy corneal water content levels to central corneal thickness measurements performed by ultrasound or optical coherence tomography. Trends revealing increasing or decreasing corneal thickness are fair indicators of corneal water content by individual measurements are highly inaccurate due to the poorly understood relationship between corneal thickness and natural physiologic variation. Recently the utility of THz imaging to accuarately measure corneal water content has been explored on with rabbit models. Preliminary experiments revealed that contact with dielectric windows confounded imaging data and made it nearly impossible to deconvolve thickness variations due to contact from thickness variations due to water content variation. A follow up study with a new optical design allowed the acquisition of rabbit data and the results suggest that the observed, time varying contrast was due entirely to the water dynamics of the cornea. This paper presents the first ever in vivo images of human cornea. Five volunteers with healthy cornea were recruited and their eyes were imaged three times over the course of a few minutes with our novel imaging system. Noticeable changes in corneal reflectivity were observed and attributed to the drying of the tear film. The results suggest that clinically compatible, non-contact corneal imaging is feasible and indicate that signal acquired from non-contact imaging of the cornea is a complicated coupling of stromal water content and tear film.

  13. Tracking discourse complexity preceding Alzheimer's disease diagnosis: a case study comparing the press conferences of Presidents Ronald Reagan and George Herbert Walker Bush.

    PubMed

    Berisha, Visar; Wang, Shuai; LaCross, Amy; Liss, Julie

    2015-01-01

    Changes in some lexical features of language have been associated with the onset and progression of Alzheimer's disease. Here we describe a method to extract key features from discourse transcripts, which we evaluated on non-scripted news conferences from President Ronald Reagan, who was diagnosed with Alzheimer's disease in 1994, and President George Herbert Walker Bush, who has no known diagnosis of Alzheimer's disease. Key word counts previously associated with cognitive decline in Alzheimer's disease were extracted and regression analyses were conducted. President Reagan showed a significant reduction in the number of unique words over time and a significant increase in conversational fillers and non-specific nouns over time. There was no significant trend in these features for President Bush.

  14. Galileo Space Probe News Conference

    NASA Astrophysics Data System (ADS)

    1996-01-01

    This NASA Kennedy Space Center (KSC) video release presents Part 2 of a press conference regarding the successful entry of the Galileo Space Probe into Jupiter's atmosphere. The press conference panel is comprised of twelve principal investigators and project scientists that oversee the Galileo mission. The press conference question and answer period is continued from Part 1. Atmospheric thermal structure, water abundances, wind profiles, and electricity are among the topics discussed. The question and answer period is followed by a 3 minute presentation in which all of the visuals that are shown during the press conference are reviewed. Parts 1 and 3 of the press conference can be found in document numbers NONP-NASA-VT-2000001073, and NONP-NASA-VT-2000001075.

  15. Press Start

    NASA Astrophysics Data System (ADS)

    Harteveld, Casper

    This level sets the stage for the design philosophy called “Triadic Game Design” (TGD). This design philosophy can be summarized with the following sentence: it takes two to tango, but it takes three to design a meaningful game or a game with a purpose. Before the philosophy is further explained, this level will first delve into what is meant by a meaningful game or a game with a purpose. Many terms and definitions have seen the light and in this book I will specifically orient at digital games that aim to have an effect beyond the context of the game itself. Subsequently, a historical overview is given of the usage of games with a serious purpose which starts from the moment we human beings started to walk on our feet till our contemporary society. It turns out that we have been using games for all kinds of non-entertainment purposes for already quite a long time. With this introductory material in the back of our minds, I will explain the concept of TGD by means of a puzzle. After that, the protagonist of this book, the game Levee Patroller, is introduced. Based on the development of this game, the idea of TGD, which stresses to balance three different worlds, the worlds of Reality, Meaning, and Play, came into being. Interested? Then I suggest to quickly “press start!”

  16. 4th Annual Conference for African-American Researchers in the Mathematical Sciences (CAARMS4). Preliminary Program

    SciTech Connect

    Tapia, Richard

    1998-06-01

    In June, The Center for Research on Parallel Computation (CRPC), an NSF-funded Science and Technology Center, hosted the 4th Annual Conference for African-American Reserachers in the Mathematical Sciences (CAARMS4) at Rice University. The main goal of this conference was to highlight current work by African-American researchers and graduate students in mathematics. This conference strengthened the mathematical sciences by encouraging the increased participation of African-American and underrepresented groups into the field, facilitating working relationships between them and helping to cultivate their careers. In addition to the talks there was a graduate student poster session and tutorials on topics in mathematics and computer science. These talks, presentations, and discussions brought a broader perspective to the critical issues involving minority participation in mathematics.

  17. STS-76 Post Flight Press Conference

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The flight crew of the STS-76 Space Shuttle Orbiter Atlantis; Cmdr. Kevin P. Chilton, Pilot Richard A. Searfoss, and Mission Specialists Linda M. Godwin, Michael R. Clifford, and Ronald M. Sega present an overview of their mission. Highlights STS-76 include the first spacewalk by U.S. astronauts while the shuttle is attached to the Russian Space Station Mir, and the transfer of Shannon W. Lucid to the Mir-21 crew, the first American woman to serve as a Mir station researcher. She will remain aboard the orbiting station until Atlantis again docks with Mir in early August. Video footage includes the following: prelaunch and launch activities; shuttle launch; in-orbit rendezous; in-orbit docking between Mir and the orbiter; general crew activities; tranfer of supplies; Godwin and Clifford's EVA; undocking maneuvers; and the re-entry and landing of the orbiter.

  18. STS-47 Post Flight Press Conference

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The flight crew of the STS-47 Space Shuttle Orbiter Endeavour Cmdr. Robert L. Gibson, Pilot Curtis L. Brown, Payload Cmdr. Mark C. Lee, Mission Specialists, N. Jan Davis, Jay Apt, Mae C. Jemison, and Payload Specialist, Mamoru Mohri, present an overview of their mission. This the 50th Shuttle flight marks the first NASA mission devoted primarily to Japan. Endeavour carries into Earth orbit Spacelab-J (SL-J), a 23-foot long pressurized laboratory built by the European Space Agency specifically for conducting experiments in a shirt-sleeve environment. SL-J contains 43 experiments, 34 provided by Japan, 7 from the United States and 2 joint experiments. Jemison becomes the first African American woman to fly in space and Mohri first Japanese to fly in space. Video footage includes the following: prelaunch and launch activities; various experiments including protein crystal growth, electronic materials, fluids, glasses and ceramics, metals and alloys, and the effects of microgravity on plants and animals; earth views of Japan, Tokyo Harbor, and Hurricane Bonnie; and the re-entry and landing of the orbiter.

  19. STS-114: Discovery Post MMT Press Conference

    NASA Technical Reports Server (NTRS)

    2005-01-01

    George Diller, NASA Public Affairs, introduces the panel who consist of: Bill Parsons, Space Shuttle Program Manager; Wayne Hale, Space Shuttle Deputy Program Manager; Ed Mango, Deputy Manager JSC Orbiter Project Office; and Mike Wetmore, Director of Shuttle Processing. Bill Parsons begins by expressing that he is still searching for the problem with the low level fuel sensor inside the external tank. Hale talks about more ambient tests that will be performed to fix this problem. Mango expresses his findings from tests in the aft engine compartment, point sensor box, orbiter wiring, and wire resistance. He also talks about looking in detail into the circuit analysis of the point sensor box. Questions from the news media about tanking tests and extending the launch window are addressed.

  20. PRELIMINARY REPORT CONFERENCE ON SCHOOL PROGRAMS FOR JUVENILE DELINQUENCY PREVENTION AND CONTROL, WASHINGTON, OCTOBER 30-31, 1963.

    ERIC Educational Resources Information Center

    1963

    AFTER PRELIMINARY COMMENTS BY THE SECRETARY OF HEALTH, EDUCATION, AND WELFARE AND THE COMMISSIONER OF EDUCATION, THE FIRST WORKING SESSION FOCUSED ON TWO TYPES OF SCHOOL IMPROVEMENT PROGRAMS. PREVENTION WAS EMPHASIZED IN ALL DETROIT PROJECTS, SUCH AS PRESCHOOL, SCHOOL-HOME INVOLVEMENT, READING INSTRUCTION, CURRICULAR MODIFICATION, CULTURAL…

  1. Press kit kicks off new branding.

    PubMed

    Rees, Tom

    2004-01-01

    A smartly produced press kit resulted in unprecedented news coverage when Denver's Porter Adventist Hospital recently unveiled plans for an extensive 80 million dollars redevelopment. A news conference was held to announce this plan, along with the opening of the hospital's new emergency department. The overall effort is part of the new branding strategy of the 75-year-old hospital.

  2. Reciprocating pellet press

    DOEpatents

    Jones, Charles W.

    1981-04-07

    A machine for pressing loose powder into pellets using a series of reciprocating motions has an interchangeable punch and die as its only accurately machines parts. The machine reciprocates horizontally between powder receiving and pressing positions. It reciprocates vertically to press, strip and release a pellet.

  3. The Global University Press

    ERIC Educational Resources Information Center

    Dougherty, Peter J.

    2012-01-01

    The modern world's understanding of American university press has long been shaped by university-press books. American university-press books are good international advertisements for the universities whose logos grace their spines. The growth of transnational scholarship and the expansion of digital communications networks are converging in ways…

  4. Aerial view of the Press Site

    NASA Technical Reports Server (NTRS)

    1998-01-01

    In this aerial view, The News Center sits beyond a large parking lot, on a hill at the northeastern end of the Launch Complex 39 Area , next to the turn basin (at left). From left, the grandstand faces the launch pads several miles away on the Atlantic seashore; behind it, the television studio is the site of media conferences; next, the large white-roofed building is the hub of information and activity for press representatives. Lined up on the right of the Press Site are various buildings and trailers, home to major news networks. The parking lot can accommodate the hundreds of media personnel who attend Space Shuttle launches.

  5. University Presses: Problems and Prospects.

    ERIC Educational Resources Information Center

    Meeker, Robert B.

    Historical information on university presses and their problems are considered. University presses in the United States have their roots in 15th century England when the Oxford University Press was established in 1478. The first U.S. press to use the term "university press" was Cornell University; the press operated from 1869 until it was closed…

  6. Galileo Space Probe News Conference

    NASA Astrophysics Data System (ADS)

    1996-01-01

    This NASA Kennedy Space Center (KSC) video release presents Part 3 of a press conference from Ames Research Center (ARC) regarding the successful entry of the Galileo Space Probe into Jupiter's atmosphere. The press conference panel is comprised of twelve principal investigators and project scientists that oversee the Galileo mission. The press conference question and answer period is continued from Part 2. Atmospheric thermal structure, water abundances, wind profiles, radiation, cloud structure, chemical composition, and electricity are among the topics discussed. The question and answer period is followed by a presentation in which all of the visuals that are shown during the press conference are reviewed. The video ends with several animations depicting the entry of the probe, descent, and the first measurements of the Jovian atmosphere, historical footage of the building of the probe, and a short interview with Dr. Richard Young (Galileo Probe Scientist, ARC). Parts 1 and 2 of the press conference can be found in document numbers NONP-NASA-VT-2000001073, and NONP-NASA-VT-2000001074.

  7. High School Press Freedom.

    ERIC Educational Resources Information Center

    Maurer, Diana J.

    This report focuses on controversial articles written by the high school press, decisions made by the courts regarding students' press freedoms, and reactions to the articles and rulings. Particular attention is given to two rulings concerning censorship of articles about students' sexual atttiudes and activities, the issue of prior restraint of…

  8. High School Press Pressures.

    ERIC Educational Resources Information Center

    Rogers, Luella P.

    History shows that the high school press suffers through cycles that reflect economic factors and cultural climates within communities, states, and the nation. The direction of that cycle in the 1960s and early 1970s was toward more open, free-flowing information by a vigorous student press, but those economic and cultural signs now are pointing…

  9. [The press and family planning].

    PubMed

    Abraham De D'ornellas, R

    1987-01-01

    The treatment in the press of family planning hinges on two fundamental factors: the taboo of the leftist groups and the taboo of the Catholic Church, whose head is against abortion under any circumstances. Leftist views insinuate that family planning is the genocidal plan of North American imperialists against the Third World and, in particular, against Latin America. This genocidal plan is supposed to subject poor populations to international schemes. In the press family planning is often treated in a sanctimonious fashion, lumping it together with topics like pornography, sex, and violence. In 1983 the daily newspaper Expreso published a supplement running every week for almost three months about the issue of population, which dealt fairly extensively with such topics as population and housing, education, employment, and urban proliferation, as well as responsible parenthood and child survival. In addition, there was a detailed description of contraceptive methods. In October 1986 another surprising thing happened: the President of Peru talked about the topic of family planning, which at the time was an act of courage. Since then much has changed; the whole world is interested in family planning and certain aspects of population. Since October 1986 more has been published in this domain than during the preceding 20 years. In contrast, the Church reacted differently to this issue: after some initial caution, the conference of Peruvian bishops attacked all methods of modern contraceptives and private institutions of family planning. The information boom in family planning will certainly continue. At the moment this flood of articles and editorials about the issue is an expression of the anxiety of families related to uncontrolled reproduction and the fear of overpopulation in large cities devoid of minimal services. PMID:12281466

  10. Letting The Nasa Press Engine Work For You

    NASA Astrophysics Data System (ADS)

    Weaver, Kimberly A.

    2006-09-01

    You have an amazing result based on NASA data or a NASA mission, you have written your seminal paper and submitted it to your favorite journal. You believe it has press potential and maybe you've even gotten help from your PR folks in writing a press release. Now you would really like NASA to issue this as a press release. But how do you do that? This presentation will illustrate the steps required to engage NASA in helping promote your story. What are NASA's requirements for newsworthiness? Should your news be released as a web feature story or in the local media? Does your news rise to the level of a full-blown press conference or will it be a media teleconference? How do you obtain approval for a NASA press event? Once your result is scheduled to be issued as a press release, how can you improve your chances of getting the best possible coverage for your story? I will discuss the NASA press process and suggest how to consider factors like timing, working with your collaborating institutions in an efficient way, and not letting the cat out of the bag until the press event.

  11. Press-On Optics

    ERIC Educational Resources Information Center

    Thorson, Jon C.

    1972-01-01

    The article discusses the design, application, and clinical uses of press-on optics which are descirbed as 1 millimeter thick, flexible lenses or prisms that may be produced in virtually any desired plus or minus dioptric power as ophthalmic lenses, or in any range of usable prism diopter power. (GW)

  12. Optically Aligned Drill Press

    NASA Technical Reports Server (NTRS)

    Adderholdt, Bruce M.

    1994-01-01

    Precise drill press equipped with rotary-indexing microscope. Microscope and drill exchange places when turret rotated. Microscope axis first aligned over future hole, then rotated out of way so drill axis assumes its precise position. New procedure takes less time to locate drilling positions and produces more accurate results. Apparatus adapted to such other machine tools as milling and measuring machines.

  13. Reinventing the University Press.

    ERIC Educational Resources Information Center

    Bryant, Eric

    1994-01-01

    Discusses how librarians and university press staffers could cooperate to improve the scholarly communication system. Causes of system decline, the environment for cooperation, several change models, possible changes to the publish or perish tenure system, and the probability of a slow transition to a new scholarly communications model are…

  14. CIDER PRESS, LOOKING SOUTHEAST ACROSS THE SCHUYLKILL RIVER. THIS PRESS, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    CIDER PRESS, LOOKING SOUTHEAST ACROSS THE SCHUYLKILL RIVER. THIS PRESS, CARVED OUT OF A LARGE BOULDER AT THE RIVERS EDGE, PROBABLY DATES FROM THE LIFETIME OF JOHN BARTRAM, IF NOT TO THE SWEDISH SETTLERS BEFORE HIM. THE IRON FENCE IS A NINETEENTH-CENTURY ADDITION - John Bartram House & Garden, 54th Street & Lindbergh Boulevard, Philadelphia, Philadelphia County, PA

  15. PRESS SHOP. SEVEN BLISS PRESSES STAMP OUT A VARIETY OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    PRESS SHOP. SEVEN BLISS PRESSES STAMP OUT A VARIETY OF CARTRIDGE AND SHELL CASINGS. THIS DEPARTMENT WAS TRANSFORMED FROM A MONEY-LOSING OPERATION TO A PROFIT CENTER UNDER THE FIRST WORKER-MANAGED QUALITY CIRCLE IN THE PLANT. - American Brass Foundry, 70 Sayre Street, Buffalo, Erie County, NY

  16. June 6—7, 2011 Clinical Trials Conference: New Challenges & Opportunities | NIH MedlinePlus the Magazine

    MedlinePlus

    ... please turn Javascript on. June 6–7, 2011 Clinical Trials Conference: New Challenges & Opportunities Past Issues / Spring 2011 ... pressing issues in clinical trials, including: Support the Clinical Trials Conference If you or your organization would like ...

  17. Expression, purification, crystallization, and preliminary X-ray crystallographic analysis of OXA-17, an extended-spectrum {beta}-lactamase conferring severe antibiotic resistance

    SciTech Connect

    Lee, J. H. Sohn, S. G. Jung, H. I. An, Y. J. Lee, S. H.

    2013-07-15

    OXA-17, an extended-spectrum {beta}-lactamase (ESBL) conferring severe antibiotic resistance, hydrolytically inactivates {beta}-lactam antibiotics, inducing a lack of eradication of pathogenic bacteria by oxyimino {beta}-lactams and not helping hospital infection control. Thus, the enzyme is a potential target for developing antimicrobial agents against pathogens producing ESBLs. OXA-17 was purified and crystallized at 298 K. X-ray diffraction data from OXA-17 crystal have been collected to 1.85 A resolution using synchrotron radiation. The crystal of OXA-17 belongs to space group P2{sub 1}2{sub 1}2{sub 1}, with unit-cell parameters a = 48.37, b = 101.12, and c = 126.07 A. Analysis of the packing density shows that the asymmetric unit probably contains two molecules with a solvent content of 54.6%.

  18. Expression, purification, crystallization, and preliminary X-ray crystallographic analysis of OXA-17, an extended-spectrum β-lactamase conferring severe antibiotic resistance

    NASA Astrophysics Data System (ADS)

    Lee, J. H.; Sohn, S. G.; Jung, H. I.; An, Y. J.; Lee, S. H.

    2013-07-01

    OXA-17, an extended-spectrum β-lactamase (ESBL) conferring severe antibiotic resistance, hydrolytically inactivates β-lactam antibiotics, inducing a lack of eradication of pathogenic bacteria by oxyimino β-lactams and not helping hospital infection control. Thus, the enzyme is a potential target for developing antimicrobial agents against pathogens producing ESBLs. OXA-17 was purified and crystallized at 298 K. X-ray diffraction data from OXA-17 crystal have been collected to 1.85 Å resolution using synchrotron radiation. The crystal of OXA-17 belongs to space group P212121, with unit-cell parameters a = 48.37, b = 101.12, and c = 126.07 Å. Analysis of the packing density shows that the asymmetric unit probably contains two molecules with a solvent content of 54.6%.

  19. PR and the Student Press.

    ERIC Educational Resources Information Center

    Holland, Sandy

    1994-01-01

    Techniques for college public relations professionals to use in promoting a cooperative relationship with the student press are outlined. These include being available to students, having regular meetings, providing access to administrators, providing information that creates context for news, and releasing news directly to the student press. (MSE)

  20. Press, Politics and Popular Government.

    ERIC Educational Resources Information Center

    Will, George F., Ed.

    A panel discussion on politics and the press was held at the convention of the American Political Science Association in September 1971. This volume contains an essay delivered at that panel on the various functions or activities of the press--adversary, surrogate, sovereign--and remarks of the three discussants. In addition, an essay especially…

  1. The CIA and the Press.

    ERIC Educational Resources Information Center

    Carvalho, Bernardo A.

    The involvement of the Central Intelligence Agency (CIA) with both United States and foreign news media has been recorded in numerous publications. This report reviews the important aspects of the CIA-press relationships as they have appeared in print and discusses the implications of these relationsihps for the credibility of the press. Media…

  2. Galileo Space Probe News Conference

    NASA Astrophysics Data System (ADS)

    1996-01-01

    This NASA Kennedy Space Center (KSC) video release presents Part 1 of a press conference regarding the successful entry of the Galileo Space Probe into Jupiter's atmosphere. The press conference panel is comprised of twelve principal investigators and project scientists that oversee the Galileo mission. Among these panelists, William J. O'Neil (Jet Propulsion Lab.) begins the video praising all of the scientists that worked on the orbiter mission. He then presents a visual overview of Galileo's overall mission trajectory and schedule. Marcie Smith (NASA Ames Research Center) then describes the Galileo Probe mission and the overall engineering and data acquisition aspects of the Probe's Jupiter atmospheric entry. Dr. Richard Young (NASA Ames Research Center) follows with a brief scientific overview, describing the measurements of the atmospheric composition as well as the instruments that were used to gather the data. Atmospheric pressure, temperature, density, and radiation levels of Jupiter were among the most important parameters measured. It is explained that these measurements would be helpful in determining among other things, the overall dynamic meteorology of Jupiter. A question and answer period follows the individual presentations. Atmospheric thermal structure, water abundances, wind profiles, radiation, cloud structure, chemical composition, and electricity are among the topics discussed. Parts 2 and 3 of the press conference can be found in document numbers NONP-NASA-VT-2000001074, and NONP-NASA-VT-2000001075.

  3. Nineteenth lunar and planetary science conference. Press abstracts

    SciTech Connect

    Not Available

    1988-01-01

    Topics addressed include: origin of the moon; mineralogy of rocks; CO2 well gases; ureilites; antarctic meteorites; Al-26 decay in a Semarkona chondrule; meteorite impacts on early earth; crystal structure and density of helium; Murchison carbonaceous chondrite composition; greenhouse effect and dinosaurs; Simud-Tiu outflow system of Mars; and lunar radar images.

  4. Sixteenth Lunar and Planetary Science Conference. Press abstracts

    NASA Technical Reports Server (NTRS)

    1985-01-01

    A broad range of topics concerned with lunar and planetary science are discussed. Topics among those included are, the sun, the planets, comets, meteorities, asteroids, satellites, space exploration, and the significance of these to Earth.

  5. STS-11/41-B Post Flight Press Conference

    NASA Technical Reports Server (NTRS)

    1984-01-01

    This NASA KSC video release begins with opening remarks from Mission Commander Vance D. Brand followed by the other 4 spacecrew panel members (Robert L. Gibson, Pilot, and Mission Specialists, Bruce McCandless II, Ronald E. McNair, Robert L. Stewart) commenting on a home-video that includes highlights of the entire flight from take-off to landing. This video includes actual footage of the deployment of the Westar-VI and PALAPA-B2 satellites as well as preparation for and the actual EVA's that featured a Spacepak that enabled the astronauts to move outside the orbiter untethered. This video is followed by a slide presentation made-up of images taken from approximately 2000 still photographs taken during the mission. All of the slides are described by members of the space crew and include images of the Earth seen from Challenger. A question and answer period rounds out the video, which include problems encountered with the deployment of the satellites as well as the possibilities of sending civilians into space.

  6. STS-26 Post-Flight Crew Press Conference

    NASA Technical Reports Server (NTRS)

    1988-01-01

    This video tape contains footage selected and narrated by the STS-26 crew including launch, TDRS-C/IUS (Tracking and Data Relay Satellite C / Inertial Upper Stage) deployment, onboard activities, and landing.

  7. STS-93: Columbia/Chandra Crew Press Conference

    NASA Technical Reports Server (NTRS)

    1999-01-01

    This videotape consists of six different segments. The first segment is a close-up shot from Near-Earth Asteroid Rendezvous (NEAR) of the asteroid EROS. The second presents close-up shots of the Chandra telescope in the clean room. The third segment is an animated film showing the deployment of the Chandra telescope from the shuttle payload bay, and views of the elliptical orbit patterns that the telescope is planned to take. The fourth segment shows TRW Executive Vice President & General Manager, Systems & Information Technology Group, Donald Winter announcing the delivery of the Chandra Telescope to NASA. The fifth part was announced on the tape as an interview of Carolyn Griner, the Deputy Director of Marshall Space Flight Center, but this is not on the tape. The sixth segment shows views of the fourth United States Microgravity Payload (USMP-4) experiments. After shots of the STS-87 liftoff, the tape has views of the Isothermal Dendrite Growth Experiment (IDGE), views of the payload bay, and some further views of the astronauts working on one of the experiments in the payload.

  8. Nineteenth Lunar and Planetary Science Conference. Press abstracts

    NASA Technical Reports Server (NTRS)

    1988-01-01

    Topics addressed include: origin of the moon; mineralogy of rocks; CO2 well gases; ureilites; antarctic meteorites; Al-26 decay in a Semarkona chondrule; meteorite impacts on early earth; crystal structure and density of helium; Murchison carbonaceous chondrite composition; greenhouse effect and dinosaurs; Simud-Tiu outflow system of Mars; and lunar radar images.

  9. A comparison of impulse drying to double felted pressing on pilot- scale shoe presses and roll presses

    SciTech Connect

    Orloff, D.I.

    1992-08-01

    Pilot-scale shoe press and roll press experiments have been conducted to compare impulse drying and double felted pressing. Both ceramic coated and Beloit Type C press rolls have been evaluated. The experiments show that impulse drying can provide significantly higher outgoing solids than double felled pressing at the same impulse. For example, at an impulse of 0.234 MPa seconds (34 psi seconds), sheets at an ingoing solids of 52% were impulse dried (using the Beloit Type C press roll) to 68% solids while optimized double felled pressing could only yield press dryness of, at most, 60%.

  10. Programming Practices of Atlantic Coast Conference Wind Ensembles

    ERIC Educational Resources Information Center

    Wiltshire, Eric S.; Paul, Timothy A.; Paul, Phyllis M.; Rudnicki, Erika

    2010-01-01

    This study examined the programming trends of the elite wind bands/ensembles of the Atlantic Coast Conference universities. Using survey techniques previously employed by Powell (2009) and Paul (2010; in press), we contacted the directors of the Atlantic Coast Conference band programs and requested concert programs from their top groups for the…

  11. How a Research Conference Created New Learning: A Case Study

    ERIC Educational Resources Information Center

    Hatcher, Tim; Wiessner, Colleen Aalsburg; Storberg-Walker, Julia; Chapman, Diane

    2006-01-01

    Purpose: The study presents preliminary findings from research begun at the 2005 Academy of Human Resource Development International Research Conference held in Estes Park, CO, USA. The qualitative case study captures what new learning occurred as a result of the conference and how the new learning at the conference occurred.…

  12. Inaugural AGU Science Policy Conference

    NASA Astrophysics Data System (ADS)

    Uhlenbrock, Kristan

    2012-01-01

    AGU will present its inaugural Science Policy Conference, 30 April to 3 May 2012, at the Ronald Reagan Building and International Trade Center, located in downtown Washington, D. C. This conference will bring together leading scientists, policy makers, industry professionals, press, and other stakeholders to discuss natural hazards, natural resources, oceans, and Arctic science and the role these sciences play in serving communities. To bridge the science and policy fields, AGU plans to host this conference every 2 years and focus on the applications of Earth and space sciences to serve local and national communities. "Our nation faces a myriad of challenges such as the sustainability of our natural resources, current and future energy needs, and the ability to mitigate and adapt to natural and manmade hazards," said Michael McPhaden, president of AGU. "It is essential that policies to address these challenges be built on a solid foundation of credible scientific knowledge."

  13. Radial Electromagnetic Press for Ignitor

    NASA Astrophysics Data System (ADS)

    Pizzuto, A.; Capriccioli, A.; Gasparotto, M.; Palmieri, A.; Rita, C.; Roccella, M.; Coppi, B.

    1996-11-01

    The active vertical press included so far in the Ignitor design can be substituted advantageously (e.g. in terms of the machine maintenance procedure) by a radial electromagnetic press, without involving modification of the main machine components. Only the bracing ring of the radial mechanical preloading system that is permanently applied requires some changes. The radial press has to compensate for the reduced ring load (from 200 MN to 120 MN) and the original vertical press load of 35 MN. To get an equivalent preloading system, the radial press load has to be 140 MN, which is 25 MN higher, to account for the lower efficiency of the radial load. The current needed to originate the 140 MN force is about 3.2 MA. The press is active for 2 s starting from the plasma current rise. The temperature increase is about 20 ^oC. The stray field at the plasma border is well within the allowable value and can be easily compensated by varying slightly the current of one couple of poloidal coils. The new machine layout is illustrated and the electromagnetic and mechanical analyses carried out for the new configuration are given. Sponsored by ENEA, CNR and ASP, of Italy, and by the US DoE

  14. Teaching about U.S. Climate Policy and the 2009 Copenhagen Conference

    ERIC Educational Resources Information Center

    Risinger, C. Frederick

    2009-01-01

    The 2009 Copenhagen Conference will take place December 7-18 in the Bella Conference Center just a few miles from the Copenhagen airport. Emissaries from 170 nations are expected, with several other smaller countries sending representatives. More than 8,000 people are expected to attend, including members of the press. The Copenhagen Conference is…

  15. Conference Resolution

    NASA Astrophysics Data System (ADS)

    2009-04-01

    Since the first IUPAP International Conference on Women in Physics (Paris, March 2002) and the Second Conference (Rio de Janeiro, May 2005), progress has continued in most countries and world regions to attract girls to physics and advance women into leadership roles, and many working groups have formed. The Third Conference (Seoul, October 2008), with 283 attendees from 57 countries, was dedicated to celebrating the physics achievements of women throughout the world, networking toward new international collaborations, building each participant's capacity for career success, and aiding the formation of active regional working groups to advance women in physics. Despite the progress, women remain a small minority of the physics community in most countries.

  16. Computational Biology Support: RECOMB Conference Series (Conference Support)

    SciTech Connect

    Michael Waterman

    2006-06-15

    This funding was support for student and postdoctoral attendance at the Annual Recomb Conference from 2001 to 2005. The RECOMB Conference series was founded in 1997 to provide a scientific forum for theoretical advances in computational biology and their applications in molecular biology and medicine. The conference series aims at attracting research contributions in all areas of computational molecular biology. Typical, but not exclusive, the topics of interest are: Genomics, Molecular sequence analysis, Recognition of genes and regulatory elements, Molecular evolution, Protein structure, Structural genomics, Gene Expression, Gene Networks, Drug Design, Combinatorial libraries, Computational proteomics, and Structural and functional genomics. The origins of the conference came from the mathematical and computational side of the field, and there remains to be a certain focus on computational advances. However, the effective use of computational techniques to biological innovation is also an important aspect of the conference. The conference had a growing number of attendees, topping 300 in recent years and often exceeding 500. The conference program includes between 30 and 40 contributed papers, that are selected by a international program committee with around 30 experts during a rigorous review process rivaling the editorial procedure for top-rate scientific journals. In previous years papers selection has been made from up to 130--200 submissions from well over a dozen countries. 10-page extended abstracts of the contributed papers are collected in a volume published by ACM Press and Springer, and are available at the conference. Full versions of a selection of the papers are published annually in a special issue of the Journal of Computational Biology devoted to the RECOMB Conference. A further point in the program is a lively poster session. From 120-300 posters have been presented each year at RECOMB 2000. One of the highlights of each RECOMB conference is a

  17. 7 CFR 550.29 - Press releases.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 6 2012-01-01 2012-01-01 false Press releases. 550.29 Section 550.29 Agriculture... Program Management § 550.29 Press releases. Press releases or other forms of public notification will be... opportunity to review, in advance, all written press releases and any other written information to be...

  18. 7 CFR 550.29 - Press releases.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 6 2013-01-01 2013-01-01 false Press releases. 550.29 Section 550.29 Agriculture... Program Management § 550.29 Press releases. Press releases or other forms of public notification will be... opportunity to review, in advance, all written press releases and any other written information to be...

  19. 7 CFR 550.29 - Press releases.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 6 2014-01-01 2014-01-01 false Press releases. 550.29 Section 550.29 Agriculture... Program Management § 550.29 Press releases. Press releases or other forms of public notification will be... opportunity to review, in advance, all written press releases and any other written information to be...

  20. 7 CFR 550.29 - Press releases.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Press releases. 550.29 Section 550.29 Agriculture... Program Management § 550.29 Press releases. Press releases or other forms of public notification will be... opportunity to review, in advance, all written press releases and any other written information to be...

  1. 7 CFR 550.29 - Press releases.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 6 2011-01-01 2011-01-01 false Press releases. 550.29 Section 550.29 Agriculture... Program Management § 550.29 Press releases. Press releases or other forms of public notification will be... opportunity to review, in advance, all written press releases and any other written information to be...

  2. Biomedical Conferences

    NASA Technical Reports Server (NTRS)

    1976-01-01

    As a result of Biomedical Conferences, Vivo Metric Systems Co. has produced cardiac electrodes based on NASA technology. Frequently in science, one highly specialized discipline is unaware of relevant advances made in other areas. In an attempt to familiarize researchers in a variety of disciplines with medical problems and needs, NASA has sponsored conferences that bring together university scientists, practicing physicians and manufacturers of medical instruments.

  3. Dans la presse pour adolescents (In the Adolescent Press).

    ERIC Educational Resources Information Center

    Benoit-Barnet, Marie-Paule; And Others

    1982-01-01

    A professional conference exercise for teachers of French as a second language is described, in which participants analyzed the cultural content and linguistic form of headlines in adolescent mass literature. Two examples of this kind of analysis are given. (MSE)

  4. Censorship and the Student Press.

    ERIC Educational Resources Information Center

    Oettinger, Lauren

    The First Amendment rights provided to journalists--freedom of speech and of the press--are fundamental beliefs held by Americans. What students learn in the government class, however, may not be what they learn as editors-in-chief of student newspapers. U.S. schools are being charged with the censorship of student publications at an…

  5. Law and the Student Press.

    ERIC Educational Resources Information Center

    Stevens, George E.; Webster, John B.

    Court cases and legal decisions involving the student press in the late 1960s and early 1970s are brought together in this book in order to show how the law has been applied to school officials and student journalists in high school, college, and the underground. The ten chapters cover the following topics: censorship, libel, obscenity, contempt,…

  6. Gifted Education Press Quarterly, 1995.

    ERIC Educational Resources Information Center

    Fisher, Maurice D., Ed.

    1995-01-01

    This document consists of the four issues of the newsletter "Gifted Education Press Quarterly" published during 1995. This newsletter addresses issues in the education of gifted children and youth. The major articles are: (1) "Using Today's Technology: Parents Can Help Challenge Gifted Children" (Adrienne O'Neill); (2) "Outcomes-Based Education…

  7. The Alternative Press in Microform.

    ERIC Educational Resources Information Center

    Tsang, Daniel C.

    Presented is an analysis of what has been done regarding the preservation of alternative publications in microfilm. The alternative press was defined, for the purposes of this study, as "nonstandard, nonestablishment publications." Two projects undertaken to microfilm such publications, one by the Microphoto Division of Bell and Howell and the…

  8. Conference Summary

    NASA Technical Reports Server (NTRS)

    Harrington, James L., Jr.

    2000-01-01

    Celebrations and special events were in order this year as the Minority University-Space Interdisciplinary Network (MU-SPIN) Program and NASA's Minority University Research and Education Division (MURED) both reached their 10th anniversaries. In honor of this occasion, the 2000 Annual Users' Conference held at Morris Brown College (MBC) in Atlanta, Georgia, September 11-15, 2000, was the first to be jointly hosted by MU-SPIN and MURED. It was particularly fitting that this anniversary should fall in the year 2000. The start of the new millennium propelled us to push bold new ideas and renew our commitment to minority university participation in all areas of NASA. With the theme 'Celebrating Our Tenth Year With Our Eyes on the Prize,' the conference provided a national forum for showcasing successful MU-SPIN and MURED Program (MUREP) experiences to enhance faculty/student development in areas of scientific and technical research and education. Our NASA-relevant conference agenda resulted in a record-breaking 220 registered attendees. Using feedback from past participants, we designed a track of student activities closely tailored to their interests. The resulting showcase of technical assistance and best practices set a new standard for our conferences in the years to come. This year's poster session was our largest ever, with over 50 presentations from students, faculty, and teachers. Posters covered a broad range of NASA activities from 'A Study of the Spiral Galaxy M101' to 'Network Cabling Characteristics.'

  9. Ruiz Volcano: Preliminary report

    NASA Astrophysics Data System (ADS)

    Ruiz Volcano, Colombia (4.88°N, 75.32°W). All times are local (= GMT -5 hours).An explosive eruption on November 13, 1985, melted ice and snow in the summit area, generating lahars that flowed tens of kilometers down flank river valleys, killing more than 20,000 people. This is history's fourth largest single-eruption death toll, behind only Tambora in 1815 (92,000), Krakatau in 1883 (36,000), and Mount Pelée in May 1902 (28,000). The following briefly summarizes the very preliminary and inevitably conflicting information that had been received by press time.

  10. The Burger Court and the Press.

    ERIC Educational Resources Information Center

    Higdon, Philip R.

    This report discusses recent cases involving freedom of the press that have been heard before the Burger court of the United States Supreme Court. The report discerns a trend toward treating the press like an ordinary citizen; this is a reversal of the view of the Warren court that the First Amendment creates special rights for the press so that…

  11. 28 CFR 540.64 - Press pools.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Press pools. 540.64 Section 540.64... PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a press pool whenever he or she determines that the frequency of requests for interviews and...

  12. 28 CFR 540.64 - Press pools.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 28 Judicial Administration 2 2014-07-01 2014-07-01 false Press pools. 540.64 Section 540.64... PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a press pool whenever he or she determines that the frequency of requests for interviews and...

  13. 28 CFR 540.64 - Press pools.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Press pools. 540.64 Section 540.64... PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a press pool whenever he or she determines that the frequency of requests for interviews and...

  14. 28 CFR 540.64 - Press pools.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Press pools. 540.64 Section 540.64... PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a press pool whenever he or she determines that the frequency of requests for interviews and...

  15. Attention that Indicators Receive in the Press

    ERIC Educational Resources Information Center

    Hendriks, Maria; Barzano, Giovanna; Brumana, Emanuela; Cremonesi, Claudia

    2004-01-01

    With the release of each edition of Education at a Glance, the Office for Economic Co-operation and Development (OECD) prepares a press briefing to be used for the international press release and which individual countries in preparing their national press releases can also use. Similarly, the European Union prepares a summary, not for use at the…

  16. 28 CFR 540.64 - Press pools.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Press pools. 540.64 Section 540.64... PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a press pool whenever he or she determines that the frequency of requests for interviews and...

  17. Galileo Space Probe News Conference. Part 1

    NASA Technical Reports Server (NTRS)

    1996-01-01

    This NASA Kennedy Space Center (KSC) video release presents Part 1 of a press conference regarding the successful entry of the Galileo Space Probe into Jupiter's atmosphere. The press conference panel is comprised of twelve principal investigators and project scientists that oversee the Galileo mission. Among these panelists, William J. O'Neil (Jet Propulsion Lab.) begins the video praising all of the scientists that worked on the orbiter mission. He then presents a visual overview of Galileo's overall mission trajectory and schedule. Marcie Smith (NASA Ames Research Center) then describes the Galileo Probe mission and the overall engineering and data acquisition aspects of the Probe's Jupiter atmospheric entry. Dr. Richard Young (NASA Ames Research Center) follows with a brief scientific overview, describing the measurements of the atmospheric composition as well as the instruments that were used to gather the data. Atmospheric pressure, temperature, density, and radiation levels of Jupiter were among the most important parameters measured. It is explained that these measurements would be helpful in determining among other things, the overall dynamic meteorology of Jupiter. A question and answer period follows the individual presentations. Atmospheric thermal structure, water abundances, wind profiles, radiation, cloud structure, chemical composition, and electricity are among the topics discussed. Parts 2 and 3 of the press conference can be found in document numbers NONP-NASA-VT-2000001074, and NONP-NASA-VT-2000001075.

  18. Fluorescence Microscopy and Fluorescent Probes, Vol. 2, Edited by Jan Slavík 1998. Plenum Press, New York and London. 292 pages. (hardback, $95.00).

    PubMed

    Herman, Brian

    1999-03-01

    In June of 1995, the first conference on Fluorescent Microscopy and Fluorescent Probes was held in the beautiful city of Prague in the Czech Republic and the proceedings of that meeting were published by Plenum Press in 1996 (Fluorescence Microscopy and Fluorescent Probes, Vol. 1, edited by Jan Slavík). Based on the success of the first conference, a second conference was held two years later again in Prague, and this book is the proceedings of that meeting.

  19. Fluorescence Microscopy and Fluorescent Probes, Vol. 2, Edited by Jan Slavík 1998. Plenum Press, New York and London. 292 pages. (hardback, $95.00)

    NASA Astrophysics Data System (ADS)

    Herman, Brian

    1999-03-01

    In June of 1995, the first conference on Fluorescent Microscopy and Fluorescent Probes was held in the beautiful city of Prague in the Czech Republic and the proceedings of that meeting were published by Plenum Press in 1996 (Fluorescence Microscopy and Fluorescent Probes, Vol. 1, edited by Jan Slavik). Based on the success of the first conference, a second conference was held two years later again in Prague, and this book is the proceedings of that meeting.

  20. 19 CFR 207.15 - Written briefs and conference.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 19 Customs Duties 3 2014-04-01 2014-04-01 false Written briefs and conference. 207.15 Section 207... SUBSIDIZED EXPORTS TO THE UNITED STATES Preliminary Determinations § 207.15 Written briefs and conference... issued pursuant to § 207.12 a written brief containing information and arguments pertinent to the...

  1. 19 CFR 207.15 - Written briefs and conference.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 19 Customs Duties 3 2010-04-01 2010-04-01 false Written briefs and conference. 207.15 Section 207... SUBSIDIZED EXPORTS TO THE UNITED STATES Preliminary Determinations § 207.15 Written briefs and conference... issued pursuant to § 207.12 a written brief containing information and arguments pertinent to the...

  2. Fabrication of Monolithic RERTR Fuels by Hot Isostatic Pressing

    SciTech Connect

    Jan-Fong Jue; Blair H. Park; Curtis R. Clark; Glenn A. Moore; Dennis D. Keiser, Jr.

    2010-11-01

    The RERTR (Reduced Enrichment for Research and Test Reactors) Program is developing advanced nuclear fuels for high-power test reactors. Monolithic fuel design provides higher uranium loading than that of the traditional dispersion fuel design. Hot isostatic pressing is a promising process for low-cost batch fabrication of monolithic RERTR fuel plates for these high-power reactors. Bonding U Mo fuel foil and 6061 Al cladding by hot isostatic press bonding was successfully developed at Idaho National Laboratory. Due to the relatively high processing temperature, the interaction between fuel meat and aluminum cladding is a concern. Two different methods were employed to mitigate this effect: (1) a diffusion barrier and (2) a doping addition to the interface. Both types of fuel plates have been fabricated by hot isostatic press bonding. Preliminary results show that the direct fuel/cladding interaction during the bonding process was eliminated by introducing a thin zirconium diffusion barrier layer between the fuel and the cladding. Fuel plates were also produced and characterized with a silicon-rich interlayer between fuel and cladding. This paper reports the recent progress of this developmental effort and identifies the areas that need further attention.

  3. Next conference

    NASA Astrophysics Data System (ADS)

    Hexemer, Alexander; Toney, Michael F.

    2010-11-01

    After the successful conference on Synchrotron Radiation in Polymer Science (SRPS) in Rolduc Abbey (the Netherlands), we are now looking forward to the next meeting in this topical series started in 1995 by H G Zachmann, one of the pioneers of the use of synchrotron radiation techniques in polymer science. Earlier meetings were held in Hamburg (1995), Sheffield (2002), Kyoto (2006), and Rolduc (2009). In September of 2012 the Synchrotron Radiation and Polymer Science V conferences will be organized in a joint effort by the SLAC National Accelerator Laboratory and Lawrence Berkeley National Laboratory. Stanford Linear Accelerator Laboratory Stanford Linear Accelerator Laboratory Advanced Light Source at LBL Advanced Light Source at LBL The conference will be organised in the heart of beautiful San Francisco. The program will consist of invited and contributed lectures divided in sessions on the use of synchrotron SAXS/WAXD, imaging and tomography, soft x-rays, x-ray spectroscopy, GISAXS and reflectivity, micro-beams and hyphenated techniques in polymer science. Poster contributions are more than welcome and will be highlighted during the poster sessions. Visits to both SLAC as well as LBL will be organised. San Francisco can easily be reached. It is served by two major international airports San Francisco International Airport and Oakland International Airport. Both are being served by most major airlines with easy connections to Europe and Asia as well as national destinations. Both also boast excellent connections to San Francisco city centre. We are looking forward to seeing you in the vibrant city by the Bay in September 2012. Golden gate bridge Alexander Hexemer Lawrence Berkeley National Laboratory, Advanced Light Source, Berkeley, CA 94720, USA Michael F Toney Stanford Synchrotron Radiation Lightsource, Menlo Pk, CA 94025, USA E-mail: ahexemer@lbl.gov, mftoney@slac.stanford.edu

  4. Conference Summary

    NASA Astrophysics Data System (ADS)

    Ellis, R. S.

    2008-10-01

    This first Subaru international conference has highlighted the remarkably diverse and significant contributions made using the 8.2m Subaru telescope by both Japanese astronomers and the international community. As such, it serves as a satisfying tribute to the pioneering efforts of Professors Keiichi Kodaira and Sadanori Okamura whose insight and dedication is richly rewarded. Here I try to summarize the recent impact of wide field science in extragalactic astronomy and cosmology and take a look forward to the key questions we will address in the near future.

  5. Conferences revisited

    NASA Astrophysics Data System (ADS)

    Radcliffe, Jonathan

    2008-08-01

    Way back in the mid-1990s, as a young PhD student, I wrote a Lateral Thoughts article about my first experience of an academic conference (Physics World 1994 October p80). It was a peach of a trip - most of the lab decamped to Grenoble for a week of great weather, beautiful scenery and, of course, the physics. A whole new community was there for me to see in action, and the internationality of it all helped us to forget about England's non-appearance in the 1994 World Cup finals.

  6. NASA/MSFC Large Stretch Press Study

    NASA Technical Reports Server (NTRS)

    Choate, M. W.; Nealson, W. P.; Jay, G. C.; Buss, W. D.

    1985-01-01

    The purpose of this study was to: A. assess and document the advantages/disadvantages of a government agency investment in a large stretch form press on the order of 5000 tons capacity (per jaw); B. develop a procurement specification for the press; and C. provide trade study data that will permit an optimum site location. Tasks were separated into four major elements: cost study, user survey, site selection, and press design/procurement specification.

  7. International Fragile X Conference Proceedings (3rd, Snowmass/Aspen, Colorado, 1992).

    ERIC Educational Resources Information Center

    Hagerman, Randi Jenssen, Ed.; McKenzie, Pamela, Ed.

    This proceedings document presents the texts or summaries of 52 papers given at a 1992 conference on Fragile X syndrome. Preliminary information includes names and institutional affiliations of conference faculty, information about the National Fragile X Foundation, awards presented at the conference, and a list of resource centers (by state).…

  8. Grain-boundary cavitation and bloating of isostatically hot-pressed magnesia-partially-stabilized zirconia on air annealing

    SciTech Connect

    Hogg, C.L.; Stringer, R.K.; Swain, M.V.

    1986-03-01

    Commercially sintered magnesia-partially-stabilized zirconia was densified to near theoretical density by isostatic hot-pressing at 200 MPa and 1700/sup 0/C in argon. Subsequent air annealing above 1100/sup 0/C resulted in bloating of the material due to grain-boundary cavitation. Mass spectrometry of crushed samples detected the evolution of CO/sub 2/ and possibly CO on annealing; the hot-pressed material showed a sudden gas evolution above 1400/sup 0/C. Preliminary Auger and ESCA analysis identified the presence of carbon as graphite and an undefined carbide in both the sintered and the hot-pressed material.

  9. The Press vs. Professional Wrestling: How the Press Covered WrestleMania III.

    ERIC Educational Resources Information Center

    Ortizano, Giacomo L.

    This paper analyzes the relationship between the press and professional wrestling. It examines professional wrestling as a business and the conflicting goals of the promoters and the press. The paper focuses on how the press covered the most widely viewed professional wrestling show of all time, WrestleMania III (looking at newspaper coverage…

  10. A comparison of impulse drying to double felted pressing on pilot- scale shoe presses and roll presses. Progress report, No. 6

    SciTech Connect

    Orloff, D.I.

    1992-08-01

    Pilot-scale shoe press and roll press experiments have been conducted to compare impulse drying and double felted pressing. Both ceramic coated and Beloit Type C press rolls have been evaluated. The experiments show that impulse drying can provide significantly higher outgoing solids than double felled pressing at the same impulse. For example, at an impulse of 0.234 MPa seconds (34 psi seconds), sheets at an ingoing solids of 52% were impulse dried (using the Beloit Type C press roll) to 68% solids while optimized double felled pressing could only yield press dryness of, at most, 60%.

  11. In the Stocks: Perilous Press Releases.

    ERIC Educational Resources Information Center

    Morton, Linda P.; Loving, Bill

    1994-01-01

    Reviews some of the legal responsibilities of public relations practitioners in the preparation of press releases. Discusses legal criteria for judging the fraudulence of press releases and discusses the timeframe for fraudulent action. Concludes with lessons that practitioners need to understand. (SR)

  12. The Egyptian Press: An Official Fourth Estate.

    ERIC Educational Resources Information Center

    Lawhorne, Clifton O.

    A descriptive study based on Egyptian law, printed sources, and interviews clarifies our picture of the Egyptian Press by examining its status as a constitutionally mandated "Fourth Estate." The constitutional amendment, the resultant Egyptian Press Law, and the "Law Of Shame" (all passed in 1980), are designed to create a heavily controlled press…

  13. Fracture toughness of hot-pressed beryllium

    NASA Technical Reports Server (NTRS)

    Lemon, D. D.; Brown, W. F., Jr.

    1985-01-01

    This paper presents the results of an investigation into the fracture toughness, sustained-load flaw growth, and fatigue-crack propagation resistance of S200E hot-pressed beryllium at room temperature. It also reviews the literature pertaining to the influence of various factors on the fracture toughness of hot-pressed beryllium determined using fatigue-cracked specimens.

  14. Conference summary

    NASA Astrophysics Data System (ADS)

    Rebolo, R.

    ``Brown dwarfs come of age" was a stimulating conference attended by a large number of very active researchers, including many young students and post-docs who were largely responsible for the lively atmosphere that we enjoyed during the full meeting. Major theoretical and observational challenges currently faced in the study of brown dwarfs were reviewed. Key spectroscopic work is being conducted to determine atmospheric temperatures, surface gravities and metallicities, essential to understand the evolution of substellar objects. Research on ultracool atmospheres is extended down to temperatures typical of the atmosphere of the Earth. Characterisation of brown dwarfs at all wavelengths from X-ray to radio is ongoing and investigation of time domain phenomena reveal interesting new processes in cool atmospheres. In addition to talks on these topics, a large number of presentations addressed the formation and evolution of brown dwarfs, the lower end of the Initial Mass Function, the properties of substellar binaries, the angular momentum and disk evolution in very low-mass systems, results of large scale surveys aimed to find the lowest luminosity and coolest brown dwarfs, searches in star clusters delineating the evolution with age of the properties of brown dwarfs, binary searches and subsequent follow-up work enabling dynamical mass determinations. The excellent level of the review talks, oral and poster presentations and the work of the enthusiastic researchers that attended the meeting ensure a brilliant future for substellar research 18 years after the discovery of the first brown dwarfs.

  15. Postsecondary Institutions and Cost of Attendance in 2015-16; Degrees and Other Awards Conferred, 2014-15; and 12-Month Enrollment, 2014-15. First Look (Preliminary Data). NCES 2016-112

    ERIC Educational Resources Information Center

    Ginder, Scott A.; Kelly-Reid, Janice E.; Mann, Farrah B.

    2016-01-01

    The Integrated Postsecondary Education Data System (IPEDS) collects institution-level data from postsecondary institutions in the United States (50 states and the District of Columbia) and other U.S. jurisdictions (see appendix A for a list of other U.S. jurisdictions). This "First Look" presents findings from the preliminary data of the…

  16. Postsecondary Institutions and Cost of Attendance in 2014-15; Degrees and Other Awards Conferred, 2013-14; and 12-Month Enrollment, 2013-14. First Look (Preliminary Data). NCES 2015-097

    ERIC Educational Resources Information Center

    Ginder, Scott A.; Kelly-Reid, Janice E.; Mann, Farrah B.

    2015-01-01

    This "First Look" presents findings from the preliminary data of the Integrated Postsecondary Education Data System (IPEDS) fall 2014 data collection, which included three survey components: Institutional Characteristics for the 2014-15 academic year; Completions, covering the period July 1, 2013, through June 30, 2014; and 12-Month…

  17. Postsecondary Institutions and Cost of Attendance in 2012-13;Degrees and Other Awards Conferred, 2011-12; and 12-Month Enrollment, 2011-12. First Look (Preliminary Data). NCES 2013-289

    ERIC Educational Resources Information Center

    Ginder, Scott A.; Kelly-Reid, Janice E.

    2013-01-01

    The Integrated Postsecondary Education Data System (IPEDS) collects institution-level data from postsecondary institutions in the United States (50 states and the District of Columbia) and other U.S. jurisdictions. This "First Look" presents findings from the preliminary data of the IPEDS fall 2012 data collection, which included three survey…

  18. Postsecondary Institutions and Cost of Attendance in 2013-14; Degrees and Other Awards Conferred, 2012-13; and 12-Month Enrollment, 2012-13. First Look (Preliminary Data). NCES 2014-066

    ERIC Educational Resources Information Center

    Ginder, Scott A.; Kelly-Reid, Janice E.; Mann, Farrah B.

    2014-01-01

    The Integrated Postsecondary Education Data System (IPEDS) collects institution-level data from postsecondary institutions in the United States (50 states and the District of Columbia) and other U.S. jurisdictions (see appendix A for a list of other U.S. jurisdictions). This "First Look" presents findings from the preliminary data of the…

  19. Postsecondary Institutions and Price of Attendance in 2011-12, Degrees and Other Awards Conferred: 2010-11, and 12-Month Enrollment--2010-11. First Look (Preliminary Data). NCES 2012-289

    ERIC Educational Resources Information Center

    Knapp, Laura G.; Kelly-Reid, Janice E.; Ginder, Scott A.

    2012-01-01

    The Integrated Postsecondary Education Data System (IPEDS) collects institution-level data from postsecondary institutions in the United States (50 states and the District of Columbia) and other U.S. jurisdictions (see appendix A for a list of other U.S. jurisdictions). This "First Look" presents findings from the preliminary data of the IPEDS…

  20. The 50th Annual Maize Genetics Conference

    SciTech Connect

    Cone, Karen

    2014-03-26

    The 50th Annual Maize Genetics Conference was held February 27 - March 2, 2008 at the Marriott Wardman Park Hotel in Washington, D.C. As the golden anniversary of the Conference and coinciding with the release of a draft of the maize genome sequence, this was a special meeting. To publicize this unique occasion, meeting organizers hosted a press conference, which was attended by members of the press representing science and non-science publications, and an evening reception at the Smithsonian National Museum of Natural History, where the draft sequence was announced and awards were presented to Dr. Mary Clutter and Senator Kit Bond to thank them for their outstanding contributions to maize genetics and genomics research. As usual, the Conference provided an invigorating forum for exchange of recent research results in many areas of maize genetics, e.g., cytogenetics, development, molecular genetics, transposable element biology, biochemical genetics, and genomics. Results were shared via both oral and poster presentations. Invited talks were given by four distinguished geneticists: Vicki Chandler, University of Arizona; John Doebley, University of Wisconsin; Susan Wessler, University of Georgia; and Richard Wilson, Washington University. There were 46 short talks and 241 poster presentations. The Conference was attended by over 500 participants. This included a large number of first-time participants in the meeting and an increasingly visible presence by individuals from underrepresented groups. Although we do not have concrete counts, there seem to be more African American, African and Hispanic/Latino attendees coming to the meeting than in years past. In addition, this meeting attracted many participants from outside the U.S. Student participation continues to be hallmark of the spirit of free exchange and cooperation characteristic of the maize genetics community. With the generous support provided by DOE, USDA NSF, and corporate/private donors, organizers were

  1. Powder pressing in a macrosonic field

    NASA Technical Reports Server (NTRS)

    Protipopescu, A.; Dragan, O.; Ciovica, D.

    1974-01-01

    An investigation was conducted to extend the technology of powder product manufacturing to new forms and sizes, to improve their quality as well as pressing efficiency and to reduce waste. In the course of metal and nonmetal powder briquette pressing, macrosounds were associated with the external static pressing force, which led to an increase in the relative height, density and physicomechanical characteristics of the briquettes. This method permits the extension of the range of products that can be manufactured from powders and the improvement of their quality.

  2. Sound Recordings in the Audiovisual Archives Division of the National Archives. Preliminary Draft.

    ERIC Educational Resources Information Center

    Bray, Mayfield S.; Waffen, Leslie C.

    Some 47,000 sound recordings dating from the turn of the century have been collected in the National Archives. These recordings, consisting of recordings of press conferences, panel discussions, interviews, speeches, court and conference proceedings, entertainment programs, and news broadcasts, are listed in this paper by government agency. The…

  3. Clarification of Orange Press Liquors by PVDF Hollow Fiber Membranes

    PubMed Central

    Simone, Silvia; Conidi, Carmela; Ursino, Claudia; Cassano, Alfredo; Figoli, Alberto

    2016-01-01

    Press liquors are typical by-products of the citrus juice processing characterized by a high content of organic compounds and associated problems of environmental impact, which imply high treatment costs. However, these wastes contain a great number of health promoting substances, including fibers, carotenoids and phenolic compounds (mainly flavonoids), whose recovery against waste-destruction technologies is very attractive for new business opportunities. In this work, the clarification of orange press liquor by using microfiltration (MF) membranes is studied as a preliminary step to obtain a permeate stream enriched in antioxidant compounds which can be further processed to produce extracts of nutraceutical and/or pharmaceutical interest. MF poly(vinylidene fluoride) (PVDF) hollow fibers were prepared by the dry/wet spinning technique. A series of fibers was produced from the same polymeric dope, in order to investigate the effect of selected spinning parameters, i.e., bore fluid composition and flowrate, on their properties. The morphology of the produced fibers was analyzed by Scanning Electron Microscopy (SEM). Fibers were further characterized for their mechanical properties, porosity, bubble point, pore size distribution and pure water permeability (PWP). Some of the produced fibers exhibited high permeability (pure water permeability ~530 L/m2·h·bar), coupled to good mechanical resistance and pore size in the range of MF membranes. These fibers were selected and used for the clarification of press liquor from orange peel processing. In optimized operating conditions, the selected fibers produced steady-state fluxes of about 41 L/m2·h with rejections towards polyphenols and total antioxidant activity of 4.1% and 1.4%, respectively. PMID:26805899

  4. Clarification of Orange Press Liquors by PVDF Hollow Fiber Membranes.

    PubMed

    Simone, Silvia; Conidi, Carmela; Ursino, Claudia; Cassano, Alfredo; Figoli, Alberto

    2016-01-01

    Press liquors are typical by-products of the citrus juice processing characterized by a high content of organic compounds and associated problems of environmental impact, which imply high treatment costs. However, these wastes contain a great number of health promoting substances, including fibers, carotenoids and phenolic compounds (mainly flavonoids), whose recovery against waste-destruction technologies is very attractive for new business opportunities. In this work, the clarification of orange press liquor by using microfiltration (MF) membranes is studied as a preliminary step to obtain a permeate stream enriched in antioxidant compounds which can be further processed to produce extracts of nutraceutical and/or pharmaceutical interest. MF poly(vinylidene fluoride) (PVDF) hollow fibers were prepared by the dry/wet spinning technique. A series of fibers was produced from the same polymeric dope, in order to investigate the effect of selected spinning parameters, i.e., bore fluid composition and flowrate, on their properties. The morphology of the produced fibers was analyzed by Scanning Electron Microscopy (SEM). Fibers were further characterized for their mechanical properties, porosity, bubble point, pore size distribution and pure water permeability (PWP). Some of the produced fibers exhibited high permeability (pure water permeability ~530 L/m²·h·bar), coupled to good mechanical resistance and pore size in the range of MF membranes. These fibers were selected and used for the clarification of press liquor from orange peel processing. In optimized operating conditions, the selected fibers produced steady-state fluxes of about 41 L/m²·h with rejections towards polyphenols and total antioxidant activity of 4.1% and 1.4%, respectively. PMID:26805899

  5. Major Conference about Astronomical Technology in Munich

    NASA Astrophysics Data System (ADS)

    2000-03-01

    Press Conference on Monday, March 27, 2000 Which are the latest astronomical discoveries made with the new 8-10 metre class astronomical telescopes? Will it be possible to construct even more powerful instruments on the ground and in space to explore the near and distant Universe at all wavelengths from gamma-rays to radio waves? Which research areas in this dynamical science are likely to achieve break-throughs with emerging new technologies? These are some of the central themes that will be discussed by more than 600 specialists from all over the world at an international conference in Munich (Germany), "Astronomical Telescopes and Instruments 2000" , beginning on Monday, March 27, 2000. During five days, the modern architecture of the new International Congress Center in the Bavarian capital will be the scene of lively exchanges about recent progress at the world's top-class astronomical research facilities and the presentation of inspired new ideas about future technological opportunities. The conference will be accompanied by numerous on-site exhibition stands by the major industries and research organisations in this wide field. This meeting is the latest in a series, organised every second year, alternatively in the USA and Europe by the International Society for Optical Engineering (SPIE) , this year with the European Southern Observatory (ESO) as co-sponsor and host institution. The conference will be opened in the morning of March 27 by the Bavarian Minister of Science, Research and Arts, Hans Zehetmair . His address will be followed by keynote speeches by Massimo Tarenghi (European Southern Observatory), James B. Breckenridge (National Science Foundation, USA), Harvey Butcher (Netherlands Foundation for Research in Astronomy) and Albrecht Ruediger (Max Planck Institut für Quantenoptik, Germany). The conference is subtitled "Power Telescopes and Instrumentation into the New Millennium" and will be attended by leading scientists and engineers from all

  6. Effects of chemicothermal treatment of aluminum nitride powders on the structure and properties of the resulting hot-pressed ceramic

    SciTech Connect

    Tkachenko, Yu.G.; Morozova, R.A.; Yurchenko, D.Z.

    1995-07-01

    Preliminary treatment in hydrogen for aluminum nitride powders (before hot pressing) affects the strengthening and structuring of the ceramic. There is a positive effect from the gas heat treatment on account of recrystallization during sintering and increase in plasticity of the aluminum nitride due to the hydrogen dissolved in the lattice.

  7. 75 FR 7447 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-19

    ... Investigations, 74 FR 53710 (October 20, 2009). The notice of initiation stated that unless postponed the... Presses From Indonesia and the People's Republic of China: Postponement of Preliminary Determinations of... Brangman (Indonesia) or Demitrios Kalogeropoulos (the People's Republic of China), AD/CVD...

  8. 17 CFR 230.135e - Offshore press conferences, meetings with issuer representatives conducted offshore, and press...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... proposed offering in the United States, include a statement regarding this intention; and (3) Not include any purchase order, or coupon that could be returned indicating interest in the offering, as part...

  9. Gas-driven filter pressing in magmas

    USGS Publications Warehouse

    Sisson, T.W.; Bacon, C.R.

    1999-01-01

    Most silicic and some mafic magmas expand via second boiling if they crystallize at depths of about 10 km or less. The buildup of gas pressure due to second boiling can be relieved by expulsion of melt out of the region of crystallization, and this process of gas-driven filter pressing assists the crystallization differentiation of magmas. For gas-driven filter pressing to be effective, the region of crystallization must inflate slowly relative to buildup of pressure and expulsion of melt These conditions are satisfied in undercooled magmatic inclusions and in thin sheets of primitive magma underplating cooler magma reservoirs. Gas-driven filter pressing thereby adds fractionated melt to magma bodies. Gas-driven filter pressing is probably the dominant process by which highly evolved melts segregate from crystal mush to form aplitic dikes in granitic plutons; this process could also account for the production of voluminous, crystal-poor rhyolites.

  10. ISMB Conference Proceedings

    SciTech Connect

    Teresa, Gaasterand; Martin, Vingron

    2011-07-01

    the EasyChair submission and reviewing system; Mona Singh and Joel S. Bader for sharing their experience from last year; the team at Oxford University Press for typesetting the papers; Conference Chairs Burkhard Rost, Michal Linial, Peter Schuster and Kurt Zatloukal, as well as the ISMB/ECCB 2011 Steering Committee, for their valuable input; and Steven Leard for helping us oversee the process.

  11. The General Conference Mennonites.

    ERIC Educational Resources Information Center

    Ediger, Marlow

    General Conference Mennonites and Old Order Amish are compared and contrasted in the areas of physical appearance, religious beliefs, formal education, methods of farming, and home settings. General Conference Mennonites and Amish differ in physical appearance and especially in dress. The General Conference Mennonite men and women dress the same…

  12. Parent Conferences. Beginnings Workshop.

    ERIC Educational Resources Information Center

    Duffy, Roslyn; And Others

    1997-01-01

    Presents six workshop sessions on parent conferences: (1) "Parents' Perspectives on Conferencing" (R. Duffy); (2) "Three Way Conferences" (G. Zeller); (3) "Conferencing with Parents of Infants" (K. Albrecht); (4) "Conferencing with Parents of School-Agers" (L. G. Miller); (5) "Cross Cultural Conferences" (J. Gonzalez-Mena); and (6) "Working with…

  13. Graphic Arts: Book Three. The Press and Related Processes.

    ERIC Educational Resources Information Center

    Farajollahi, Karim; And Others

    The third of a three-volume set of instructional materials for a graphic arts course, this manual consists of nine instructional units dealing with presses and related processes. Covered in the units are basic press fundamentals, offset press systems, offset press operating procedures, offset inks and dampening chemistry, preventive maintenance…

  14. Textbook Sales Drop, and University Presses Search for Reasons

    ERIC Educational Resources Information Center

    Howard, Jennifer

    2008-01-01

    This article reports that textbook sales are falling at many university presses, a trend that has accelerated in the past couple of months. That's the word from press directors anxious about the decline but unsure what's causing it or how to stop it. Not every press has been affected. Two of the biggest players, Oxford University Press and…

  15. Along Freedom's Double Edge: The Arab Press Under Israeli Occupation.

    ERIC Educational Resources Information Center

    Nasser, Munir K.

    This paper examines the Arab press under Israeli occupation and presents two hypotheses: freedom of the press under occupation serves both Israeli interests and the Arab population, and freedom of the Arab press under occupation is "relative" and "controlled." By allowing freedom of expression, the Israelis achieve several aims: a free press will…

  16. Particle Characterization of Pressed Granular HMX

    NASA Astrophysics Data System (ADS)

    Burnside, N. J.; Son, S. F.; Skidmore, C. B.; Asay, B. W.

    1997-07-01

    Often, little material characterization is reported in studies that use granular explosives, such as deflagration-to-detonation transition (DDT) experiments. This lack of characterization makes modeling and interpretation of the experiments difficult. Further, very little is known about how particle size changes with compaction processes, even for quasi-static pressing. Changes in available surface area could significantly affect the initiation of such materials. In this work we report measurements of the particle size distribution of original granular HMX, as well as the size distribution of pressed (higher density) samples. Scanning electron microscope (SEM) pictures are presented and are found to be useful in interpreting the size distribution measurements of the granular HMX, as well as helping to more fully characterizing the state of the particles. We find that the particle size distribution changes significantly with pressing. That is, particles are observed to be highly fractured and damaged at higher pressed densities. Also, we have found that sample preparation can significantly affect size distribution measurements. In particular, even short duration sonication can have a significant effect on the measured size distributions of pressed HMX samples.

  17. Lever-press conditioning in the crab.

    PubMed

    Abramson, C I; Feinman, R D

    1990-08-01

    An operant chamber has been developed for studying lever-press conditioning in the green crab Carcinus maenas. In one series of experiments, animals were presented with a single bar and were reinforced with food for every bar press. Performance increased over time and high rates of responding were observed after 2 days of training. The response rate was always higher than that for a yoked (noncontingent) control group. When the contingencies were switched, the animals adjusted to the new conditions. Discrimination in the lever-press apparatus was demonstrated in a second experiment in which crabs had to choose between two bars, one (S+) caused food to be dispensed while the other (S-) was inactive. Experimental animals pressed the S+ bar at a significantly higher rate than the S- bar. When the contingencies associated with the lever were reversed, animals learned to switch to the correct bar by the second day. It was not necessary to reinforce every response: animals maintained high rates of responding on a schedule where every other response was reinforced. Animals used different methods of pressing the bar; the most common was extension of the claw, predominantly at the meropodite-carpopodite joint. PMID:2255730

  18. AUPress: A Comparison of an Open Access University Press with Traditional Presses

    ERIC Educational Resources Information Center

    McGreal, Rory; Chen, Nian-Shing

    2011-01-01

    This study is a comparison of AUPress with three other traditional (non-open access) Canadian university presses. The analysis is based on the rankings that are correlated with book sales on Amazon.com and Amazon.ca. Statistical methods include the sampling of the sales ranking of randomly selected books from each press. The results of one-way…

  19. Speaking of a Free Press: 200 Years of Notable Quotations about Press Freedoms.

    ERIC Educational Resources Information Center

    American Newspaper Publishers Association Foundation, Washington, DC.

    Intended to summarize the ideals underlying the struggle for freedom of the press and to reinforce the basic Constitutional principles upon which the United States functions, this collection of quotations reflects the beliefs of prominent people throughout history who have championed press freedom, as well as the ideas of some who have opposed it.…

  20. INTEGRAL Science Data Centre to be presented to the press

    NASA Astrophysics Data System (ADS)

    2002-03-01

    The task of INTEGRAL, the most sensitive gamma-ray observatory ever launched, will be to gather some of the most energetic radiation that comes from space. It will pinpoint and study gamma-ray sources in unprecedented detail and will help to solve some of the biggest mysteries in astronomy: INTEGRAL will investigate the origin of enigmatic gamma-ray bursts, brief but extremely powerful releases of energy, and will bring much new information on stellar explosions and black holes. Not only does INTEGRAL tell us about places where we could not live, it also tell us about the processes that made the Universe habitable, such as the formation of chemical elements. The INTEGRAL Science Data Centre (ISDC), located near Geneva, represents the key element in the exploitation and analysis of the data that will come from INTEGRAL during the two years planned for in-orbit operations. In the centre, the data will be analysed, formatted and made accessible to the worldwide astronomical community. Such fundamental work on INTEGRAL data guarantees that data can be exploited by a wide community of astronomers, including those who are not familiar with the instrumentation used for gamma-ray observations. The ISDC is supported and funded by a dozen institutes in Europe and the United States (the ISDC consortium). The press conference on 11 April marks the end of the centre's development phase and the start of its operational phase. The presence of the ISDC in Switzerland represents a particular opportunity for Swiss scientists, who will participate in a special way to the development of high-energy particle astrophysics, as a result of having privileged access to INTEGRAL data. Speakers at the press conference will include Professor T. Courvoisier (Geneva Observatory, Principal Investigator of the INTEGRAL Science Data Centre), Doctor P. Creola, (Head of Swiss Space Office), and Professor D. Southwood (Director of Science at the European Space Agency). Note to editors INTEGRAL, ESA

  1. Setting Our Sights: Current Trends and Future Directions. Proceedings and Highlights of the New York State Conference on Educational Issues of Students with Visual Impairments (April 6-7, 1979).

    ERIC Educational Resources Information Center

    Lapham, E. Virginia Sheppard, Ed.; And Others

    The conference report contains background information on organizing the April, 1979, New York, conference on educational issues of students with visual impairments; results of a preliminary needs assessment questionnaire; texts of 12 conference presentations; the conference evaluation results; and the program. The needs assessment questionnaire…

  2. Predicting the performance of belt filter presses using the Crown Press for laboratory simulation

    SciTech Connect

    Graham, T.M.

    1999-07-26

    Belt filter presses (BFPs) are among the most commonly used devices to dewater wastewater sludge. The concept used by a BFP to achieve dewatered cake solids is relatively simple; however, replicating this performance in the laboratory in order to predict the performance of a BFP with reasonable reliability has proven to be a challenge. The Crown Press is one tool that has been shown to replicate the performance of anaerobically digested sludge on a BFP. This study used the Crown Press to replicate and predict the performance of waste activated sludge (WAS) from the Mauldin Road wastewater treatment plant on BFPs. Several operational variables, including belt speed, belt tension, polymer type, and polymer dose, were changed on the Crown Press to predict how the changes on the BFP would affect performance. Two polymers were chosen to be tested on the BFPs at Mauldin Road based on Crown Press predictions. The first polymer performed the same as the plant`s current polymer in the lab, and the second performed better (achieved higher final cake solids) than the current polymer. These predictions were borne out in the BFP tests, showing that the Crown Press predictions were accurate. The Crown Press predictions were also compared to the predictions made by the capillary suction time (CST) and specific resistance to filtration (SRF) tests. The Crown Press provided more information regarding the affect of polymer type and dose on cake solids than either CST or SRF. The Crown Press was shown to be a viable tool to assess potential changes in BFP performance with WAS when operational variables change.

  3. A Journalist's Guide to the Free Press.

    ERIC Educational Resources Information Center

    Ingelhart, Louis

    1996-01-01

    Summarizes the content of the federal constitution and various state constitutions regarding freedom of the press. Examines certain borderline issues, including actions and expressions, pornography, defamation, libel, and copyrighted material. States that regulation of unprotected material must be reasonable, specific, and clear. Discusses what…

  4. Press Site Auditorium dedicated to John Holliman

    NASA Technical Reports Server (NTRS)

    1999-01-01

    A ceremony dedicated the KSC Press Site auditorium as the John Holliman Auditorium to honor the correspondent for his enthusiastic, dedicated coverage of America's space program. The auditorium was built in 1980 and has been the focal point for new coverage of Space Shuttle launches. The ceremony followed the 94th launch of a Space Shuttle, on mission STS-96, earlier this morning.

  5. Neo-Lysenkoism, IQ, and the Press.

    ERIC Educational Resources Information Center

    Davis, Bernard D.

    1983-01-01

    In "The Mismeasure of Man," a history of efforts to measure intelligence, Stephen Jay Gould is highly selective in his account, and tests for scientific truth by the standards of his own social and political convictions. Specifically, to combat racist approaches to theories of intelligence, Gould presses for equal and opposite bias. (Author/GC)

  6. Be Prepared to Meet the Press.

    ERIC Educational Resources Information Center

    Pedro, Nick J.

    1989-01-01

    Offers school administrators tips for sharpening their public relations skills. Educators interviewed by the press should do research beforehand, answer practice questions, listen before speaking, admit ignorance, make every statement count, be circumspect, ask for a review copy, attend to follow-up, keep a clipping file, and maintain open…

  7. Communications in Agriculture: The American Farm Press.

    ERIC Educational Resources Information Center

    Evans, James F.; Salcedo, Rodolfo N.

    This book studies communications in agriculture, focusing on the American farm press. As defined here, a commercial farm periodical is directed to farmers and supports itself through the sale of subscriptions or advertising. It includes local as well as regional and national periodicals. A 90-year analysis, from 1880 to 1970, was chosen because…

  8. STS-9 Spacelab 1 Press Kit

    NASA Technical Reports Server (NTRS)

    1983-01-01

    Press information on the STS-9/SPACELAB 1 mission is provided. Launch preparations, launch window, flight objectives, experiments, life sciences baseline data collection, SPACELAB 1 payload operations and control crew and specialists, and tracking and data management are among the topics explained.

  9. Student Press Corps (Use the News).

    ERIC Educational Resources Information Center

    Mahler, Susan

    1989-01-01

    Describes the Student Press Corps, a program in which high school students submit weekly columns concerning local high school events for editing and possible publication by the local newspaper. Reports that training sessions have been fully enrolled for two years and that all participants are extremely positive about the program. (RS)

  10. 7 CFR 58.421 - Press.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 3 2013-01-01 2013-01-01 false Press. 58.421 Section 58.421 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE...

  11. The Press, Privacy, and Community Mores.

    ERIC Educational Resources Information Center

    Glasser, Theodore L.

    Because of judicial indifference and legislative inaction, the conflict between the right of privacy and the freedom of the press is no closer to a resolution than it was a century ago. William Prosser's reduction of the common law of privacy into four separate torts has not solved the problem. The concept of "newsworthiness" has not been helpful…

  12. Freedom of the Press: Foundations and Attitudes.

    ERIC Educational Resources Information Center

    Gibson, Martin Leroy, Jr.

    This study reports the results of a national survey of the attitudes of five demographic groups toward freedom of the press. The groups are newsmen, state legislators, high school teachers, high school students, and the general public. The survey is broken into two parts, the first dealing with general principles (e.g., support for a law against…

  13. Free Press in a Constitutional Democracy

    ERIC Educational Resources Information Center

    Lucianek, Christine

    2014-01-01

    This article describes a lesson in which students will examine several views expressed by the founders to understand the context for including freedom of the press in the First Amendment. Students will be asked to think about the role that the news media and the need to be an informed citizen continue to play in our democracy. Students will…

  14. When International Press Rights "Are" the News

    ERIC Educational Resources Information Center

    Freedman, Eric

    2006-01-01

    In many countries, reporters and editors face criminal prosecution, censorship, self-censorship, exile, tax audits, loss of broadcast and publication licenses, loss of jobs, assault, and even assassination based on how they practice their profession. Press rights and human rights advocacy groups try to draw media and official attention to those…

  15. 7 CFR 58.421 - Press.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL... maintained in good repair and in a sanitary condition. Single service press cloths shall be used only once....

  16. The Press and the Bolivian National Revolution.

    ERIC Educational Resources Information Center

    Knudson, Jerry W.

    1973-01-01

    Social revolutions, which frequently use the press as a propaganda weapon, have been rare in Latin America despite the striking social inequalities of the region. Only three classic socioeconomic revolutions have unfolded in the hemisphere--in Mexico in 1910, in Bolivia in 1952, and in Cuba in 1959. Bolivia attempted to effect radical reforms…

  17. The Moral Universes of Libertarian Press Theory.

    ERIC Educational Resources Information Center

    Wuliger, Gregory T.

    1991-01-01

    Uses Kantian logic to analyze the statement of Libertarian press theory "Truth beats falsehood in a free marketplace of ideas" as a definition, an observation, and a universal truth. Notes three corresponding moral universes, with differing ethical obligations. Discusses strengths and weaknesses of each. Cautions media ethics analysts against…

  18. An Introduction to Bibliographical Press Work.

    ERIC Educational Resources Information Center

    Richardson, John V., Jr.

    This guide to the literature of bibliographical press work is comprised of brief introductory notes on the field and this bibliography, followed by citations listed in seven categories: (1) book production, (2) handmade paper, (3) printer's ink, (4) type design, (5) book design, (6) hand printing, and (7) hand bookbinding. Introductory as well as…

  19. Law of the Student Press. Second Edition.

    ERIC Educational Resources Information Center

    Student Press Law Center, Washington, DC.

    Noting dramatic changes in First Amendment protections for high school students and new legal issues facing college newspaper editors, this book describes in detail the legal rights and responsibilities of both the high school and college press. While the book is extensively footnoted, it intentionally avoids "legal-ese" and "brings law to life"…

  20. Sound Financial Management: A National Conference (Dallas, Texas, August 26-28, 2002). Participant's Manual.

    ERIC Educational Resources Information Center

    Heveron, John F., Jr.; Shible, Frank; Jones, Darrell Lynn; Buppapong, Raweewan; Langbehn, Kristy; George, Carri; Petty, Richard; Heinsohn, Dawn

    The participant's manual contains training materials for a national conference on sound financial management for agencies concerned with promoting independent living for people with disabilities. Preliminary materials include the conference agenda, background information about the trainers, and organizational information on Independent Living…

  1. Accuracy of Press Reports in Astronomy

    NASA Astrophysics Data System (ADS)

    Schaefer, B. E.; Hurley, K.; Nemiroff, R. J.; Branch, D.; Perlmutter, S.; Schaefer, M. W.; Consolmagno, G. J.; McSween, H.; Strom, R.

    1999-12-01

    Most Americans learn about modern science from press reports, while such articles have a bad reputation among scientists. We have performed a study of 403 news articles on three topics (gamma-ray astronomy, supernovae, and Mars) to quantitatively answer the questions 'How accurate are press reports of astronomy?' and 'What fraction of the basic science claims in the press are correct?' We have taken all articles on the topics from five news sources (UPI, NYT, S&T, SN, and 5 newspapers) for one decade (1987-1996). All articles were evaluated for a variety of errors, ranging from the fundamental to the trivial. For 'trivial' errors, S&T and SN were virtually perfect while the various newspapers averaged roughly one trivial error every two articles. For meaningful errors, we found that none of our 403 articles significantly mislead the reader or misrepresented the science. So a major result of our study is that reporters should be rehabilitated into the good graces of astronomers, since they are actually doing a good job. For our second question, we rated each story with the probability that its basic new science claim is correct. We found that the average probability over all stories is 70%, regardless of source, topic, importance, or quoted pundit. How do we reconcile our findings that the press does not make significant errors yet the basic science presented is 30% wrong? The reason is that the nature of news reporting is to present front-line science and the nature of front-line science is that reliable conclusions have not yet been reached. So a second major result of our study is to make the distinction between textbook science (with reliability near 100%) and front-line science which you read in the press (with reliability near 70%).

  2. Kiln for hot-pressing compacts in a continuous manner

    DOEpatents

    Reynolds, C.D Jr.

    1983-08-08

    The invention is directed to a hot pressing furnace or kiln which is capable of preheating, hot pressing, and cooling a plurality of articles in a sequential and continuous manner. The hot pressing furnace of the present invention comprises an elongated, horizontally disposed furnace capable of holding a plurality of displaceable pusher plates each supporting a die body loaded with refractory or ceramic material to be hot pressed. Each of these plates and the die body supported thereby is sequentially pushed through the preheating zone, a temperature stabilizing and a hot pressing zone, and a cooling zone so as to provide a continuous hot-pressing operation of a plurality of articles.

  3. Kiln for hot-pressing compacts in a continuous manner

    DOEpatents

    Reynolds, Jr., Carl D.

    1985-01-01

    The present invention is directed to a hot pressing furnace or kiln which is capable of preheating, hot pressing, and cooling a plurality of articles in a sequential and continuous manner. The hot pressing furnace of the present invention comprises an elongated, horizontally disposed furnace capable of holding a plurality of displaceable pusher plates each supporting a die body loaded with refractory or ceramic material to be hot pressed. Each of these plates and the die body supported thereby is sequentially pushed through the preheating zone, a temperature stabilizing and a hot pressing zone, and a cooling zone so as to provide a continuous hot-pressing operation of a plurality of articles.

  4. 76 FR 64083 - Reliability Technical Conference; Notice of Technical Conference

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-17

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, November...

  5. 9. INTERIOR VIEW OF EYE PRESS AREA; TO LEFT IS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. INTERIOR VIEW OF EYE PRESS AREA; TO LEFT IS A TWO-BAY SLOTTED TYPE FURNACE, TO CENTER IS EYE PRESS, TO RIGHT IS CURCULAR SAW - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV

  6. Students Deserve Broad View in Advertising-Press Debate.

    ERIC Educational Resources Information Center

    Lynn, Jerry R.

    1979-01-01

    Argues that the advertising industry's influence on the press is primarily indirect and that journalism educators should divert student attention from the negative aspects of advertising's role in the press. (RL)

  7. Preliminary Analysis of Photoreading

    NASA Technical Reports Server (NTRS)

    McNamara, Danielle S.

    2000-01-01

    The purpose of this project was to provide a preliminary analysis of a reading strategy called PhotoReading. PhotoReading is a technique developed by Paul Scheele that claims to increase reading rate to 25,000 words per minute (Scheele, 1993). PhotoReading itself involves entering a "relaxed state" and looking at, but not reading, each page of a text for a brief moment (about I to 2 seconds). While this technique has received attention in the popular press, there had been no objective examinations of the technique's validity. To examine the effectiveness of PhotoReading, the principal investigator (i.e., trainee) participated in a PhotoReading workshop to learn the technique. Parallel versions of two standardized and three experimenter-created reading comprehension tests were administered to the trainee and an expert user of the PhotoReading technique to compare the use of normal reading strategies and the PhotoReading technique by both readers. The results for all measures yielded no benefits of using the PhotoReading technique. The extremely rapid reading rates claimed by PhotoReaders were not observed; indeed, the reading rates were generally comparable to those for normal reading. Moreover, the PhotoReading expert generally showed an increase in reading time when using the PhotoReading technique in comparison to when using normal reading strategies to process text. This increase in reading time when PhotoReading was accompanied by a decrease in text comprehension.

  8. Measuring the Effectiveness of a Genetic Counseling Supervision Training Conference.

    PubMed

    Atzinger, Carrie L; He, Hua; Wusik, Katie

    2016-08-01

    Genetic counselors who receive formal training report increased confidence and competence in their supervisory roles. The effectiveness of specific formal supervision training has not been assessed previously. A day-long GC supervision conference was designed based on published supervision competencies and was attended by 37 genetic counselors. Linear Mixed Model and post-hoc paired t-test was used to compare Psychotherapy Supervisor Development Scale (PSDS) scores among/between individuals pre and post conference. Generalized Estimating Equation (GEE) model and post-hoc McNemar's test was used to determine if the conference had an effect on GC supervision competencies. PSDS scores were significantly increased 1 week (p < 0.001) and 6 months (p < 0.001) following the conference. For three supervision competencies, attendees were more likely to agree they were able to perform them after the conference than before. These effects remained significant 6 months later. For the three remaining competencies, the majority of supervisors agreed they could perform these before the conference; therefore, no change was found. This exploratory study showed this conference increased the perceived confidence and competence of the supervisors who attended and increased their self-reported ability to perform certain supervision competencies. While still preliminary, this supports the idea that a one day conference on supervision has the potential to impact supervisor development.

  9. Method for hot pressing beryllium oxide articles

    DOEpatents

    Ballard, Ambrose H.; Godfrey, Jr., Thomas G.; Mowery, Erb H.

    1988-01-01

    The hot pressing of beryllium oxide powder into high density compacts with little or no density gradients is achieved by employing a homogeneous blend of beryllium oxide powder with a lithium oxide sintering agent. The lithium oxide sintering agent is uniformly dispersed throughout the beryllium oxide powder by mixing lithium hydroxide in an aqueous solution with beryllium oxide powder. The lithium hydroxide is converted in situ to lithium carbonate by contacting or flooding the beryllium oxide-lithium hydroxide blend with a stream of carbon dioxide. The lithium carbonate is converted to lithium oxide while remaining fixed to the beryllium oxide particles during the hot pressing step to assure uniform density throughout the compact.

  10. Glass Coats For Hot Isostatic Pressing

    NASA Technical Reports Server (NTRS)

    Ecer, Gunes M.

    1989-01-01

    Surface voids sealed from pressurizing gas. Coating technique enables healing of surface defects by hot isostatic pressing (HIP). Internal pores readily closed by HIP, but surface voids like cracks and pores in contact with pressurizing gas not healed. Applied to casting or weldment as thick slurry of two glass powders: one melts at temperature slightly lower than used for HIP, and another melts at higher temperature. For example, powder is glass of 75 percent SiO2 and 25 percent Na2O, while other powder SiO2. Liquid component of slurry fugitive organic binder; for example, mixture of cellulose acetate and acetone. Easy to apply, separates voids from surrounding gas, would not react with metal part under treatment, and easy to remove after pressing.

  11. Reducing VOC Press Emission from OSB Manufacturing

    SciTech Connect

    Dr. Gary D. McGinnis; Laura S. WIlliams; Amy E. Monte; Jagdish Rughani: Brett A. Niemi; Thomas M. Flicker

    2001-12-31

    Current regulations require industry to meet air emission standards with regard to particulates, volatile organic compounds (VOCs), hazardous air pollutants (HAPs) and other gases. One of many industries that will be affected by the new regulations is the wood composites industry. This industry generates VOCs, HAPs, and particulates mainly during the drying and pressing of wood. Current air treatment technologies for the industry are expensive to install and operate. As regulations become more stringent, treatment technologies will need to become more efficient and cost effective. The overall objective of this study is to evaluate the use of process conditions and chemical additives to reduce VOC/HAPs in air emitted from presses and dryers during the production of oriented strand board.

  12. Excerpts from President Dwight D. Eisenhower's News Conference of April 7, 1954.

    ERIC Educational Resources Information Center

    Epstein, Terrie

    1985-01-01

    This lesson plan for use with high school students presents excerpts from a press conference that President Eisenhower held in 1954 dealing with his domino theory and U.S. foreign policy concerning Indochina. In addition to the excerpts, discussion questions and ideas for student research projects are provided. (RM)

  13. IFLA General Conference, 1985. Division of Bibliographic Control. Sections on Bibliography, Cataloging, and Classification. Papers.

    ERIC Educational Resources Information Center

    International Federation of Library Associations, The Hague (Netherlands).

    Papers on cataloging and classification which were presented at the 1985 International Federation of Library Associations (IFLA) conference include: (1) "Online Cataloging at the Bibliotheque Nationale (Francoise Finelli and Serge Salomon, France); (2) "Development of National Press Repertoire in the Condition of Multinational State: Its Trends…

  14. District Leadership Conference Planner.

    ERIC Educational Resources Information Center

    Washington State Coordinating Council for Occupational Education, Olympia.

    This manual provides usable guidelines and planning forms and materials for planning district leadership conferences, which were designed and initiated in Washington State to meet the problems in student enrollment and, consequently, Distributive Education Clubs of America membership. The conferences have become a useful means to increase…

  15. [Conference Time Kit.

    ERIC Educational Resources Information Center

    National School Public Relations Association, Washington, DC.

    This multimedia kit, for use with and by teachers from kindergarten through the upper elementary grades, consists of four components: 1) a filmstrip for teachers; 2) the 1970 edition of a handbook, "Conference Time for Teachers and Parents"; 3) a filmstrip for parents; 4) a supporting parent information leaflet "How To Confer Successfully with…

  16. [Kweichow planned parenthood conference].

    PubMed

    1978-12-15

    On December 5th the Kweichow Provincial Planned Parenthood Leadership Group held its 1st conference to discuss the problems of planned parenthood in the province. Miao Chun-ting, deputy secretary of the provincial CCP committee and head of the provincial planned parenthood leadership group, presided over the conference.

  17. From Conference to Journal

    ERIC Educational Resources Information Center

    McCartney, Robert; Tenenberg, Josh

    2008-01-01

    Revising and extending conference articles for journal publication benefits both authors and readers. The new articles are more complete, and benefit from peer review, feedback from conference presentation, and greater editorial consistency. For those articles that are appropriate, we encourage authors to do this, and present two examples of such…

  18. The Conference in Retrospect.

    ERIC Educational Resources Information Center

    Gardner, Marjorie H.

    1982-01-01

    Presents an overview of the 6th International Conference on Chemical Education held at the University of Maryland (August 9-14, 1981), focusing on such organizational activities as roster building, people activating, innovative publishing, resolution and recommendation drafting, conference infrastructure and managerial mode, hospitality center,…

  19. The Learning Conference

    ERIC Educational Resources Information Center

    Ravn, Ib

    2007-01-01

    Purpose: The purpose of this paper is to call attention to the fact that conferences for professionals rely on massive one-way communication and hence produce little learning for delegates--and to introduce an alternative, the "learning conference", that involves delegates in fun and productive learning processes. Design/methodology/approach: A…

  20. ASE Annual Conference 2010

    ERIC Educational Resources Information Center

    McCune, Roger

    2010-01-01

    In this article, the author describes the ASE Annual Conference 2010 which was held at Nottingham after a gap of 22 years. As always, the main conference was preceded by International Day, an important event for science educators from across the world. There were two strands to the programme: (1) "What works for me?"--sharing new ideas and tried…

  1. ICCK Conference Final Report

    SciTech Connect

    Green, William H.

    2013-05-28

    The 7th International Conference on Chemical Kinetics (ICCK) was held July 10-14, 2011, at Massachusetts Institute of Technology (MIT), in Cambridge, MA, hosted by Prof. William H. Green of MIT's Chemical Engineering department. This cross-disciplinary meeting highlighted the importance of fundamental understanding of elementary reactions to the full range of chemical investigations. The specific conference focus was on elementary-step kinetics in both the gas phase and in condensed phase. The meeting provided a unique opportunity to discuss how the same reactive species and reaction motifs manifest under very different reaction conditions (e.g. atmospheric, aqueous, combustion, plasma, in nonaqueous solvents, on surfaces.). The conference featured special sessions on new/improved experimental techniques, improved models and data analysis for interpreting complicated kinetics, computational kinetics (especially rate estimates for large kinetic models), and a panel discussion on how the community should document/archive kinetic data. In the past, this conference had been limited to homogeneous gas-phase and liquid-phase systems. This conference included studies of heterogeneous kinetics which provide rate constants for, or insight into, elementary reaction steps. This Grant from DOE BES covered about half of the subsidies we provided to students and postdocs who attended the conference, by charging them reduced-rate registration fees. The complete list of subsidies provided are listed in Table 1 below. This DOE funding was essential to making the conference affordable to graduate students, and indeed the attendance at this conference was higher than at previous conferences in this series. Donations made by companies provided additional subsidies, leveraging the DOE funding. The conference was very effective in educating graduate students and important in fostering scientific interactions, particularly between scientists studying gas phase and liquid phase kinetics

  2. Through the Looking Glass: Press Responses to Genocide.

    ERIC Educational Resources Information Center

    Lipstadt, Deborah E.

    1991-01-01

    Examines press coverage of the Holocaust to analyze the response of the United States and the world to the Jewish extermination. Compares this coverage to earlier press responses to the Armenian genocide and Ukraine famines. Argues the press was unwilling to face the Holocaust's magnitude. Urges teachers to teach about the Holocaust and similar…

  3. Graphic Arts: The Press and Finishing Processes. Third Edition.

    ERIC Educational Resources Information Center

    Crummett, Dan

    This document contains teacher and student materials for a course in graphic arts concentrating on printing presses and the finishing process for publications. Seven units of instruction cover the following topics: (1) offset press systems; (2) offset inks and dampening chemistry; (3) offset press operating procedures; (4) preventive maintenance…

  4. Living Dangerously--Changing Press Law in India.

    ERIC Educational Resources Information Center

    Ryan, Timothy

    An examination of the changes in press laws after India gained its independence in 1947 shows how a free press is shaped mostly by the structure and evolution of the democratic society that it is intended to serve. The most salient features that have characterized the Indian press, from the early nineteenth century to the present day, are…

  5. The Historical Importance of Jury to Press Freedom.

    ERIC Educational Resources Information Center

    Olasky, Marvin N.

    Staggered by some recent libel verdicts, many journalists are neglecting lessons about press freedom learned at great cost during the seventeenth and eighteenth centuries. Journalists then learned that state power over the press, residing in the hands of either censors or judges, leads to a decrease in press freedom. In 1986, though, many media…

  6. The Press, Japanese Americans, and the Concentration Camps.

    ERIC Educational Resources Information Center

    Okihiro, Gary Y.; Sly, Julie

    1983-01-01

    A study of the wartime press suggests that the plan to incarcerate Japanese Americans (under Executive Order 9066) was government-initiated, that the public and the press initially disapproved of such treatment, and that events emanating from the government influenced shifts in press and public opinion that allowed implementation of the plan.…

  7. The Theater of Terror: Effects of Press Coverage.

    ERIC Educational Resources Information Center

    Weimann, Gabriel

    1983-01-01

    Compared attitudes before and after students read press clippings describing two separate terrorist incidents. Found that students exposed to press coverage tended to consider the event more noteworthy and to call for a solution. Concluded that press attention enhances the status of the people, problem, or cause behind a terrorist event. (PD)

  8. The American Native Press and American Indian Studies.

    ERIC Educational Resources Information Center

    Littlefield, Daniel F., Jr.

    1986-01-01

    As product and process, the Native American press has a long history. The establishment of the first native-run press in 1828 began a press history that continues today. That history is represented by more than 2,000 periodical titles alone, two-thirds of which have been established during the past 20 years. Impressive collections of these…

  9. The Rice University Press Initiative: An Interview with Charles Henry

    ERIC Educational Resources Information Center

    Trevitte, Chad; Henry, Charles

    2007-01-01

    In this interview Charles Henry, publisher of the Rice University Press (RUP), discusses RUP's rebirth as a fully digital university press. Henry addresses the circumstances that led to this decision, and he further outlines the RUP business model whereby the press will publish its own titles--both digitally and in print-on-demand--while…

  10. Biogas production from Jatropha curcas press-cake

    SciTech Connect

    Staubmann, R.; Guebitz, G.M.; Lafferty, R.M.

    1997-12-31

    Seeds of the tropical plant Jatropha curcas (purge nut, physic nut) are used for the production of oil. Several methods for oil extraction have been developed. In all processes, about 50% of the weight of the seeds remain as a press cake containing mainly protein and carbohydrates. Investigations have shown that this residue contains toxic compounds and cannot be used as animal feed without further processing. Preliminary experiments have shown that the residue is a good substrate for biogas production. Biogas formation was studied using a semicontinous upflow anaerobic sludge blanket (UASB) reactor; a contact-process and an anaerobic filter each reactor having a total volume of 110 L. A maximum production rate of 3.5 m{sup 3} m{sup -3} d{sup -1} was obtained in the anaerobic filter with a loading rate of 13 kg COD m{sup -3} d{sup -1}. However, the UAS reactor and the contact-process were not suitable for using this substrate. When using an anaerobic filter with Jatropha curcas seed cake as a substrate, 76% of the COD was degraded and 1 kg degraded COD yielded 355 L of biogas containing 70% methane. 28 refs., 3 figs., 4 tabs.

  11. Large scale densification of a nuclear waste ceramic by hot isostatic pressing

    SciTech Connect

    Hoenig, C.L.; Larker, H.T.

    1983-12-01

    Experimental results show that loaded bellows steel canisters, evacuated and sealed, can be cold-isostatically pressed before HIP from an initial density of 26 to 46% theoretical. Calcined powders are hygroscopic and may require degassing at 600 degrees C under vaccum, and residual gas, unless removed, is an impediment to HIP densification. Results also show that degassed synroc D powder in 50 kg quantities can be HIP densified to greater than 97% theoretical density at 1100 degrees C, 150 MPa, for 5h in a bellows canister without radial buckling. The authors believe that on the basis of this preliminary study, full-scale nuclear waste monoliths can be produced by HIP.

  12. CONFERENCE NOTE: Conference on Precision Electromagnetic Measurements

    NASA Astrophysics Data System (ADS)

    1991-01-01

    The next Conference on Precision Electromagnetic Measurements (CPEM), will be held from 9 to 12 June 1992 at the Centre des Nouvelles Industries et Technologies (CNIT), La Défense, Paris, France. This conference, which is held every two years and whose importance and high level, confirmed by thirty years' experience, are recognized throughout the world, can be considered as a forum in which scientists, metrologists and professionals will have the opportunity to present and compare their research results on fundamental constants, standards and new techniques of precision measurement in the electromagnetic domain. Topics The following topics are regarded as the most appropriate for this conference: realization of units and fundamental constants d.c. a.c. and high voltage time and frequency radio-frequency and microwaves dielectrics, antennas, fields lasers, fibre optics advanced instrumentation, cryoelectronics. There will also be a session on international cooperation. Conference Language The conference language will be English. No translation will be provided. Organizers Société des Electriciens et des Electroniciens (SEE). Bureau National de Métrologie (BNM) Sponsors Institute of Electrical and Electronics Engineers (IEEE) Instrumentation & Measurement Society Union Radio Scientifique Internationale United States National Institute of Standards and Technology Centre National d'Etudes des Télécommunications Mouvement Français pour la Qualité, Section Métrologie Comité National Français de Radioélectricité Scientifique Contact Jean Zara, CPEM 92 publicity, Bureau National de Métrologie, 22, rue Monge, 75005 Paris Tel.: (33) 1 46 34 48 16, Fax: (33) 1 46 34 48 63

  13. The Inter American Press Association as Champion of Press Freedom: Reality or Rhetoric? The Bolivian Experience, 1952-1973.

    ERIC Educational Resources Information Center

    Knudson, Jerry W.

    Each year a committee on freedom of the press, established in 1946 by the Inter American Press Association (IAPA), exposes those countries which it feels do not have freedom of the press. In 1952 Bolivia underwent a social and economic revolution. As a result, angry mobs forced the closure of the two newspapers with the largest circulation in…

  14. Effect of hot pressing additives on the leachability of hot pressed sodium hydrous titanium oxide

    SciTech Connect

    Valentine, T.M.; Sambell, R.A.J.

    1980-01-01

    Sodium hydrous titanium oxide is an ion exchange resin which can be used for immobilizing medium level waste (MLW) liquors. When hot pressed, it undergoes conversion to a ceramic. Three low melting point materials (borax, bismuth trioxide, and a mixture of PbO/CuO) were added to the (Na)HTiO and the effect that each of these had on aiding densification was assessed. Hot pressing temperature, applied pressure, and percentage addition of hot pressing aid were varied. Percentage open porosity, flexural strength, and leachability were measured. There was a linear relationship between the percentage open porosity and the logarithm of the leach rate for a constant percentage addition of each additive.

  15. Remote plunger removal device for small-scale incremental pressing

    SciTech Connect

    Burnside, N.J.; Son, S.F.; Asay, B.W.

    1997-09-01

    Small-scale pressing of high explosives (HE) at Los Alamos National Laboratory (LANL) and elsewhere is routinely performed using pneumatic presses. Blast shields provide protection to the operator during the pressing procedure, but safety of the operator is a concern during removal of the plunger, which is currently performed manually. To minimize this risk, very high tolerances between the plunger and the die are required. These tolerances are often very costly, especially in the case of long, relatively narrow dies. The safety issue is an even greater concern with incremental pressing in which cleaning the die between increments is difficult or impossible. To better protect press operators, a device has been designed and constructed to allow remote plunger removal in a standard HE press. In this report the authors describe this modified press that allows remote removal of the plunger.

  16. 47 CFR 1.248 - Prehearing conferences; hearing conferences.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Prehearing conferences; hearing conferences. 1.248 Section 1.248 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Hearing Proceedings Prehearing Procedures § 1.248 Prehearing conferences; hearing conferences. (a)...

  17. Method for hot press forming articles

    DOEpatents

    Baker, Robert R.; Hartsock, Dale L.

    1982-01-01

    This disclosure relates to an improved method for achieving the best bond strength and for minimizing distortion and cracking of hot pressed articles. In particular, in a method for hot press forming both an outer facing circumferential surface of and an inner portion of a hub, and of bonding that so-formed outer facing circumferential surface to an inner facing circumferential surface of a pre-formed ring thereby to form an article, the following improvement is made. Normally, in this method, the outside ring is restrained by a restraining sleeve of ring-shaped cross-section having an inside diameter. A die member, used to hot press form the hub, is so-formed as to have an outside diameter sized to engage the inside diameter of the restraining sleeve in a manner permitting relative movement therebetween. The improved method is one in which several pairs of matched restraining sleeve and die member are formed with each matched pair having a predetermined diameter. The predetermined diameter of each matched pair is different from another matched pair by stepped increments. The largest inside diameter of a restraining sleeve is equal to the diameter of the outer facing circumferential surface of the hub. Each pair of the matched restraining sleeve and die member is used to form an article in which an inside hub is bonded to an outside ring. The several samples so-formed are evaluated to determine which sample has the best bond formed between the hub and the ring with the least or no cracking or distortion in the ring portion of the article. Thereafter, the matched restraining sleeve and die member which form the article having the best bonding characteristics and least distortion cracking is then used for repeated formations of articles.

  18. Galileo Earth/Moon News Conference

    NASA Astrophysics Data System (ADS)

    1992-12-01

    This NASA Kennedy Space Center (KSC) video release (Part 2 of 2) is a continuation of a press conference held at the Jet Propulsion Laboratory on Dec. 1, 1992, 7 days prior to the Galileo Earth-2 flyby. The video begins following presentations given by William J. O'Neil (Galileo Project Manager), Torrence Johnson (Galileo Project Scientist), Dr. Joseph Veverka (Galileo Imaging Team, Cornell University) and during a question and answer period given for the benefit of scientific journalists. Subjects include overall Galileo spacecraft health, verification of the Gaspra images timeframe, and the condition of certain scientific spacecraft instruments. Part 1 of this video can be retrieved by using Report No. NONP-NASA-VT-2000001077.

  19. Press Site Auditorium dedicated to John Holliman

    NASA Technical Reports Server (NTRS)

    1999-01-01

    From left, Center Director Roy Bridges and NASA Administrator Daniel S. Goldin applaud as Jay Holliman, with the help of his mother, Mrs. Dianne Holliman, unveils a plaque honoring his father, the late John Holliman. At right is Tom Johnson, news group chairman of CNN. The occasion was the dedication of the KSC Press Site auditorium as the John Holliman Auditorium to honor the CNN national correspondent for his enthusiastic, dedicated coverage of America's space program. The auditorium was built in 1980 and has been the focal point for new coverage of Space Shuttle launches. The ceremony followed the 94th launch of a Space Shuttle, on mission STS-96, earlier this morning.

  20. Press Site Auditorium dedicated to John Holliman

    NASA Technical Reports Server (NTRS)

    1999-01-01

    NASA Administrator Daniel S. Goldin hands Mrs. Dianne Holliman a plaque honoring her late husband, John Holliman, a CNN national correspondent. Standing behind Goldin is Center Director Roy Bridges. At right is Tom Johnson, news group chairman of CNN. A ceremony dedicated the KSC Press Site auditorium as the John Holliman Auditorium to honor the correspondent for his enthusiastic, dedicated coverage of America's space program. The auditorium was built in 1980 and has been the focal point for new coverage of Space Shuttle launches. The ceremony followed the 94th launch of a Space Shuttle, on mission STS-96, earlier this morning.

  1. Aircraft Engine Emissions. [conference

    NASA Technical Reports Server (NTRS)

    1977-01-01

    A conference on a aircraft engine emissions was held to present the results of recent and current work. Such diverse areas as components, controls, energy efficient engine designs, and noise and pollution reduction are discussed.

  2. Conference Summary Final Remarks

    NASA Astrophysics Data System (ADS)

    Greiner, Walter

    2007-05-01

    Finally we come to the last talk. The end of the Conference is near! I try to reflect on an interesting Conference, with many different - diverse - topics and 5 parallel afternoon sessions. How to solve this difficulty? I do it my way and present a selection of what I personally found interesting. I illustrate these topics with the help of slides which are borrowed from various speakers at the conference. There are outstanding problems, which will also find attention and interest if explained to non-nuclear physicists, common people. I will address four such topics which were were discussed at this conference: Heavy-Ion Cancer Therapy Extension of the Periodic Table - Superheavy Elements Nuclear Astrophysics Hot compressed elementary matter - Production - Phases

  3. DNA sequencing conference, 2

    SciTech Connect

    Cook-Deegan, R.M.; Venter, J.C.; Gilbert, W.; Mulligan, J.; Mansfield, B.K.

    1991-06-19

    This conference focused on DNA sequencing, genetic linkage mapping, physical mapping, informatics and bioethics. Several were used to study this sequencing and mapping. This article also discusses computer hardware and software aiding in the mapping of genes.

  4. Lunar & Planetary Science Conference.

    ERIC Educational Resources Information Center

    Warner, Jeffrey L.; And Others

    1982-01-01

    Summaries of different topics discussed at the Lunar and Planetary Science Conference are presented to provide updated information to nonplanetologists. Some topics include Venus, isotopes, chondrites, creation science, cosmic dust, cratering, moons and rings, igneous rocks, and lunar soil. (DC)

  5. ESA `Huygens and Mars Express' science highlights - call to press

    NASA Astrophysics Data System (ADS)

    2005-11-01

    Almost one year has passed since ESA’s Huygens probe landed on Saturn’s largest moon, Titan. Today, a set of new wide-ranging results from the probe’s two-and-a-half hour descent and landing, part of the extraordinary NASA/ESA/ASI Cassini-Huygens mission to Saturn and its moons, is ready for release. At the same time, ESA’s Mars Express mission is continuing its investigations of Mars, painting a new picture of the 'red planet'. This includes the first ever probing below the surface of Mars, new geological clues with implications for the climate, newly-discovered surface and atmospheric features and, above all, traces of the presence of water on this world. These and other exciting findings from just one year of observations and data analysis - in the context of ESA’s overall scientific achievements - will be the focus of a press conference to be held at ESA Headquarters in Paris at 16:00 on 30 November 2005. Media interested in attending are invited to complete the following registration form. Press conference programme Space Science Highlights 2005 From Huygens to Mars Express 30 November 2005, 16:00 hrs Room 137, European Space Agency Headquarters 8-10 Rue Mario-Nikis, F-75738 Paris Cedex, France 15:30 - Registration 16:00 - A Year of European Space Science Successes Prof. David Southwood, ESA Director of Science Programme 16:10 - Highlights of the Huygens Mission Results Jean-Pierre Lebreton, ESA Huygens Project Scientist 16:15 - Robin Duttaroy, Co-Investigator, Doppler Wind Experiment, University of Bonn, Germany 16:20 - Marcello Fulchignoni , Principal Investigator, Huygens Atmospheric Structure Instrument, Université de Paris 7, France 16:25 - John Zarnecki, Principal Investigator, Surface Science Package, Open University, UK 16:30 - François Raulin, Co-Investigator, Gas Chromatograph Mass Spectrometer, Université de Paris 12 - Créteil, France 16:35 - Guy Israel, Principal Investigator, Aerosol Collector and Pyrolyser, Service d

  6. LBNL Computational Research & Theory Facility Groundbreaking - Full Press Conference. Feb 1st, 2012

    ScienceCinema

    Yelick, Kathy

    2016-07-12

    Energy Secretary Steven Chu, along with Berkeley Lab and UC leaders, broke ground on the Lab's Computational Research and Theory (CRT) facility yesterday. The CRT will be at the forefront of high-performance supercomputing research and be DOE's most efficient facility of its kind. Joining Secretary Chu as speakers were Lab Director Paul Alivisatos, UC President Mark Yudof, Office of Science Director Bill Brinkman, and UC Berkeley Chancellor Robert Birgeneau. The festivities were emceed by Associate Lab Director for Computing Sciences, Kathy Yelick, and Berkeley Mayor Tom Bates joined in the shovel ceremony.

  7. LBNL Computational Research & Theory Facility Groundbreaking - Full Press Conference. Feb 1st, 2012

    SciTech Connect

    Yelick, Kathy

    2012-01-01

    Energy Secretary Steven Chu, along with Berkeley Lab and UC leaders, broke ground on the Lab's Computational Research and Theory (CRT) facility yesterday. The CRT will be at the forefront of high-performance supercomputing research and be DOE's most efficient facility of its kind. Joining Secretary Chu as speakers were Lab Director Paul Alivisatos, UC President Mark Yudof, Office of Science Director Bill Brinkman, and UC Berkeley Chancellor Robert Birgeneau. The festivities were emceed by Associate Lab Director for Computing Sciences, Kathy Yelick, and Berkeley Mayor Tom Bates joined in the shovel ceremony.

  8. Multiphoton processes: conference proceedings

    SciTech Connect

    Lambropoulos, P.; Smith, S.J.

    1984-01-01

    The chapters of this volume represent the invited papers delivered at the conference. They are arranged according to thermatic proximity beginning with atoms and continuing with molecules and surfaces. Section headings include multiphoton processes in atoms, field fluctuations and collisions in multiphoton process, and multiphoton processes in molecules and surfaces. Abstracts of individual items from the conference were prepared separately for the data base. (GHT)

  9. Conference scene: DGVS spring conference 2009.

    PubMed

    Kolligs, Frank Thomas

    2009-10-01

    The 3rd annual DGVS Spring Conference of the German Society for Gastroenterology (Deutsche Gesellschaft für Verdauungs- und Stoffwechselkrankheiten) was held at the Seminaris Campus Hotel in Berlin, Germany, on 8-9 May, 2009. The conference was organized by Roland Schmid and Matthias Ebert from the Technical University of Munich, Germany. The central theme of the meeting was 'translational gastrointestinal oncology: towards personalized medicine and individualized therapy'. The conference covered talks on markers for diagnosis, screening and surveillance of colorectal cancer, targets for molecular therapy, response prediction in clinical oncology, development and integration of molecular imaging in gastrointestinal oncology and translational research in clinical trial design. Owing to the broad array of topics and limitations of space, this article will focus on biomarkers, response prediction and the integration of biomarkers into clinical trials. Presentations mentioned in this summary were given by Matthias Ebert (Technical University of Munich, Germany), Esmeralda Heiden (Epigenomics, Berlin, Germany), Frank Kolligs (University of Munich, Germany), Florian Lordick (University of Heidelberg, Germany), Hans Jorgen Nielsen (University of Copenhagen, Denmark), Anke Reinacher-Schick (University of Bochum, Germany), Christoph Röcken (University of Berlin, Germany), Wolff Schmiegel (University of Bochum, Germany) and Thomas Seufferlein (University of Halle, Germany).

  10. Abstracts of Suburban Press Research Series Papers Produced by the Suburban Press Research Center from July 1966 to February 1973. Suburban Press Research Series No. 14.

    ERIC Educational Resources Information Center

    Northern Illinois Univ., De Kalb. Suburban Press Research Center.

    Abstracts of 13 research investigations, speeches, and bibliographic resources, collected by the Suburban Press Research Center, are provided in this paper. Topics of discussion include the following aspects of the suburban press: pretrial coverage, characteristics of communities served by suburban newspapers, science news coverage, the role of…

  11. Where is the British national press?

    PubMed

    MacInnes, John; Rosie, Michael; Petersoo, Pille; Condor, Susan; Kennedy, James

    2007-06-01

    Although globalization has highlighted the danger of conflating state, society and nation, sociologists remain insufficiently alert to such banal nationalism. Newspapers offer a strong test case of the extent of diversity in the construction of state, national and social boundaries, since Billig and Anderson have argued they comprise a special case where their orientation to an audience simultaneously located in a state, society and nation allows them to reproduce a sense of national identity. However, despite the commonsense obviousness of the term, it proves remarkably difficult to define what the 'British national press' might comprise. Circulation density of titles varies substantially across different parts of the UK and editorial copy is altered to address diverse 'national' readerships. 'British' newspapers also circulate in other states, especially the Republic of Ireland. After reviewing how newspapers might be defined as 'national' and/or 'British', we conclude that both Anderson and Billig over-estimate the congruence, relevance and obviousness of state, society and national boundaries. If the conceptualization of such boundaries is problematic in the case of the press, it follows that it must be still more so for most other objects of sociological analysis, including that of 'society' itself.

  12. Strengthening IL Board Leadership: A National Conference (Buffalo, New York, September 9-11, 2002). Participant's Manual.

    ERIC Educational Resources Information Center

    Hughey, Anne-Marie; Newdom, Fred; Jones, Darrell Lynn; Buppapong, Raweewan; Langbehn, Kristy; Heinsohn, Dawn; Petty, Richard

    The participant's manual contains training materials for a 3-day national conference on strengthening board leadership in agencies concerned with independent living for people with disabilities. Preliminary materials include the conference agenda, background information about the trainers, and organizational information on Independent Living…

  13. Mobilizing Resources for Independent Living: A National Conference (New Orleans, Louisiana, August 5-7, 2002). Participant's Manual.

    ERIC Educational Resources Information Center

    Male, Richard; Schulz, Lee; Jones, Darrell Lynn; Buppapong, Raweewan; Langbehn, Kristy; George, Carri; Petty, Richard; Heinsohn, Dawn

    The participant's manual contains training materials for a national conference on mobilizing resources and fund raising in agencies concerned with promoting independent living for people with disabilities. Preliminary materials include the conference agenda, background information about the trainers, organizational information on Independent…

  14. Direct drive digital servo press with high parallel control

    NASA Astrophysics Data System (ADS)

    Murata, Chikara; Yabe, Jun; Endou, Junichi; Hasegawa, Kiyoshi

    2013-12-01

    Direct drive digital servo press has been developed as the university-industry joint research and development since 1998. On the basis of this result, 4-axes direct drive digital servo press has been developed and in the market on April of 2002. This servo press is composed of 1 slide supported by 4 ball screws and each axis has linearscale measuring the position of each axis with high accuracy less than μm order level. Each axis is controlled independently by servo motor and feedback system. This system can keep high level parallelism and high accuracy even with high eccentric load. Furthermore the 'full stroke full power' is obtained by using ball screws. Using these features, new various types of press forming and stamping have been obtained by development and production. The new stamping and forming methods are introduced and 'manufacturing' need strategy of press forming with high added value and also the future direction of press forming are also introduced.

  15. The Multianvil Press Research Facility at GSECARS

    NASA Astrophysics Data System (ADS)

    Wang, Y.; Uchida, T.; Rivers, M. L.; Sutton, S. R.; Weidner, D. J.; Durham, W. B.

    2002-12-01

    The multianvil press high pressure synchrotron research facility at the GSECARS beamlines consists of two large-volume presses (LVP): a 2.5 MN (250 ton) system at the bending magnet beamline (13-BM-D) and a 10 MN system at the insertion device beamline (13-ID-D). Both systems are now fully operational, with steadily increasing annual usage from ~70 days in 1998 to ~120 days in 2001. Here we present a system overview with brief scientific highlights illustrating the breadth of research and achievements made using this facility. Construction and operation of the facility are supported by the NSF Geosciences Instrumentation and Facilities Program. A DIA-type cubic-anvil apparatus and a split-cylinder apparatus (T-Cup) with 10 mm WC cubes are used to generate pressures and temperatures up to 24 GPa and 2400 K, on millimeter-sized samples, at 13-BM-D. In 13-ID-D, a large T-Cup apparatus with 25 mm anvils is used to reach pressure and temperature conditions of 25 GPa and 2500K simultaneously. Both high-pressure apparatus are mounted in die-sets, which can be easily transported in and out of the hydraulic press. Therefore all pressure generating apparatus can be used at any beamline, depending on research needs. A new deformation DIA (DDIA) was commissioned in August, 2002. This apparatus is capable of generating 30% strain on a 1 mm sample at pressures to ~15 GPa, allowing quantitative triaxial deformation experiments. Close to 400 runs have been carried out at our facility in a wide range of research areas: (1) P-V-T equation of state measurements on important mantle minerals, Fe alloys, and pressure standards, (2) in situ determination of phase relations of silicates, Fe alloys, and semiconductors using X-ray diffraction, (3) falling sphere measurements using radiography to determine viscosity of the silicate and metallic melts, (4) ultrasonic velocity measurements on mantle minerals, especially non-quenchable high pressure phases (e.g., high-pressure clinoenstatite

  16. 30. BUILDING NO. 527, DEHYDRATING PRESSES, LOOKING SOUTH. ALUMINUM NARROWGUAGE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    30. BUILDING NO. 527, DEHYDRATING PRESSES, LOOKING SOUTH. ALUMINUM NARROW-GUAGE GONDOLA CAR IN LEFT BACKGROUND BROUGHT MOISTENED GUN COTTON FROM REST HOUSE (BUILDING NO. 320-B) IN CANS. (ONE OF THESE CANS IS ON UNLOADING PLATFORM RUNNING BESIDE PRESSES). CONTENTS OF CANS WERE UNLOADED INTO PRESSES BY HAND. - Picatinny Arsenal, 500 Area, Powder Factory & Power House, State Route 15 near I-80, Dover, Morris County, NJ

  17. Photographic Study Of A Dead-Pressed Explosive

    NASA Astrophysics Data System (ADS)

    Swallowe, G. M.; Field, J. E.

    1983-03-01

    High speed photography in conjunction with electron microscopy and a pressure measuring technique have been used to investigate the differences between dead-pressed and non-dead-pressed samples of the primary explosive Mercury Fulminate (Hg Ful). Photographs of reaction propagation were taken in transmitted light using a specially adapted drop-weight machine with transparent anvils. The results of these experiments suggested a mechanism for dead-pressing in Hg Ful based on the microscopic internal structure of the compacted explosive.

  18. Steam press hand burns: a serious burn injury.

    PubMed

    Woods, J A; Cobb, A T; Drake, D B; Edlich, R F

    1996-01-01

    Steam presses cause full-thickness burns when the operator's extremity is caught between the buck and the head of the steam press. Patients with serious steam press burns should be referred to a regional burn center for excision of the full-thickness burn and coverage by either a split-thickness skin graft or a flap. The safety features in steam presses that could prevent this serious injury include: (1) emergency safety releases, (2) peripheral safety bars, and (3) two-hand operator control.

  19. Thermoelectric properties of pressed bismuth nanoparticles

    NASA Astrophysics Data System (ADS)

    Hostler, Stephen R.; Qu, Yu Qiao; Demko, Michael T.; Abramson, Alexis R.; Qiu, Xiaofeng; Burda, Clemens

    2008-03-01

    Theory predicts a substantial increase in the dimensionless figure of merit as the dimensionality and characteristic size of a material are decreased. We explore the use of bismuth nanoparticles pressed into pellets as potential increased efficiency thermoelectric materials. The figure of merit of these pellets is determined by independently measuring the electrical conductivity, thermal conductivity and Seebeck coefficient. The results from the nanoparticle sample are compared to microparticle-based samples. Both sample types show a slight reduction in thermal conductivity relative to bulk bismuth and a Seebeck coefficient near or slightly larger in magnitude than bulk bismuth. These changes are dwarfed by a hundred-fold decrease in the electrical conductivity due to porosity and an oxide layer on the particles. The low conductivity leads to figures of merit at least two orders of magnitude smaller than bulk bismuth. Oxide layer removal and reduced pellet porosity will be required to increase the figure of merit.

  20. Hot isostatic pressing of titanium based materials

    SciTech Connect

    Froes, F.H.; Widmer, R.; Hebeisen, J.

    1996-12-31

    The importance of titanium in demanding aerospace and terrestrial applications is presented, and the necessity to reduce cost to increase use is discussed. Hot isostatic pressing (HIP`ing) can be utilized with titanium based materials to obtain cost reduction and to enhance performance. The science/technology of various facets of the titanium scenario where HIP`ing can be used to advantage is presented, including powder metallurgy, castings, metal matrix composites and use of thermochemical processing. The major application of HIP`ing for titanium based materials is in castings; followed by blended elemental concepts. Much work has been conducted on continuous fiber reinforced materials, with the first use in actual commercial components likely to occur in engine components. Discontinuously reinforced products are already in use in aerospace and terrestrial applications. For the future, developing processing such as mechanical alloying, nanostructured materials and rapidly solidified product could benefit from compaction by HIP`ing. 55 refs., 30 figs.

  1. Texaco presses projects for gasification process

    SciTech Connect

    Not Available

    1992-07-06

    This paper reports that Texaco Inc. continues to press international ventures for its gasification process. A combine of Italian companies plans an $800 million integrated gasification/combined cycle power plant at a refinery in Sicily that will use Texaco's process to gasify refinery residual to produce electrical power. Other Italian refiners are expected to follow suit with similar projects. Meanwhile, Texaco and Bitor America Corp., have signed a letter of agreement to develop integrated gasification/combined cycle electrical power generation projects. The venture plans to use Texaco's gasification process and Orimulsion, a boiler fuel that is an emulsion of Venezuelan heavy crude, water, and surfactant, as feedstock. Bitor, Boca Raton, Fla., and its parent, Bitumenes Orinoco SA, are units of Venezuela's state oil company Petroleos de Venezuela SA.

  2. Hot Isostatic Pressing of 60-Nitinol

    NASA Technical Reports Server (NTRS)

    Stanford, Malcolm K.

    2015-01-01

    The effects of varying the time, temperature and pressure during consolidation of 60-Nitinol (Nickel Titanium alloy) by hot isostatic pressing (HIP) were examined. Six HIP cycles with a cycle time of either 2 or 20 hours, temperature of 900 or 1000 degrees Centigrade, and a chamber pressure of either 100 or 200 millipascals were used. The cycle representing the shortest cycle time at the highest temperature and pressure (2 hours/1000 degrees Centigrade/200 millipascals) produced material with the highest hardness (720 Vickers Pyramid Number (HV)). A modest increase in average grain size and significant porosity reduction were observed in material subjected to the longest cycle time at the highest temperature, regardless of the pressure applied. The intent of this study is to facilitate the technology transfer involved in the processing of this material.

  3. A comparative study between spiral-filter press and belt press implemented in a cloudy apple juice production process.

    PubMed

    De Paepe, Domien; Coudijzer, Katleen; Noten, Bart; Valkenborg, Dirk; Servaes, Kelly; De Loose, Marc; Diels, Ludo; Voorspoels, Stefan; Van Droogenbroeck, Bart

    2015-04-15

    In this study, advantages and disadvantages of the innovative, low-oxygen spiral-filter press system were studied in comparison with the belt press, commonly applied in small and medium size enterprises for the production of cloudy apple juice. On the basis of equivalent throughput, a higher juice yield could be achieved with spiral-filter press. Also a more turbid juice with a higher content of suspended solids could be produced. The avoidance of enzymatic browning during juice extraction led to an attractive yellowish juice with an elevated phenolic content. Moreover, it was found that juice produced with spiral-filter press demonstrates a higher retention of phenolic compounds during the downstream processing steps and storage. The results demonstrates the advantage of the use of a spiral-filter press in comparison with belt press in the production of a high quality cloudy apple juice rich in phenolic compounds, without the use of oxidation inhibiting additives.

  4. A comparative study between spiral-filter press and belt press implemented in a cloudy apple juice production process.

    PubMed

    De Paepe, Domien; Coudijzer, Katleen; Noten, Bart; Valkenborg, Dirk; Servaes, Kelly; De Loose, Marc; Diels, Ludo; Voorspoels, Stefan; Van Droogenbroeck, Bart

    2015-04-15

    In this study, advantages and disadvantages of the innovative, low-oxygen spiral-filter press system were studied in comparison with the belt press, commonly applied in small and medium size enterprises for the production of cloudy apple juice. On the basis of equivalent throughput, a higher juice yield could be achieved with spiral-filter press. Also a more turbid juice with a higher content of suspended solids could be produced. The avoidance of enzymatic browning during juice extraction led to an attractive yellowish juice with an elevated phenolic content. Moreover, it was found that juice produced with spiral-filter press demonstrates a higher retention of phenolic compounds during the downstream processing steps and storage. The results demonstrates the advantage of the use of a spiral-filter press in comparison with belt press in the production of a high quality cloudy apple juice rich in phenolic compounds, without the use of oxidation inhibiting additives. PMID:25466116

  5. Publicity as policy: the changing role of press and public relations at the BMA, 1940s-80s.

    PubMed

    Loughlin, Kelly

    2005-01-01

    Relationships between policy and publicity or public relations (PR) have been questioned since the emergence of professional public relations in the early-twentieth century. In the field of health and medicine organised PR activity began to flourish in the decades following World War Two. Its presence became evident in government departments, in professional associations, voluntary bodies and campaigning groups. Increasingly, policy decisions had to be publicly performed through rituals like the press conference. This chapter documents the development of press and PR activity at the British Medical Association (BMA) from the 1950s to the 1980s. The BMA provides a well-documented case, which can be used to suggest broader shifts in the association between policy and publicity.

  6. Publicity as policy: the changing role of press and public relations at the BMA, 1940s-80s.

    PubMed

    Loughlin, Kelly

    2005-01-01

    Relationships between policy and publicity or public relations (PR) have been questioned since the emergence of professional public relations in the early-twentieth century. In the field of health and medicine organised PR activity began to flourish in the decades following World War Two. Its presence became evident in government departments, in professional associations, voluntary bodies and campaigning groups. Increasingly, policy decisions had to be publicly performed through rituals like the press conference. This chapter documents the development of press and PR activity at the British Medical Association (BMA) from the 1950s to the 1980s. The BMA provides a well-documented case, which can be used to suggest broader shifts in the association between policy and publicity. PMID:16212734

  7. Animal Welfare Groups Press for Limits on High School Research.

    ERIC Educational Resources Information Center

    BioScience, 1979

    1979-01-01

    Discussions from the conference on "The Use of Animals in High School Biology Classes" are highlighted in this article. The list of science fair rules, which resulted from the conference, is included. (SA)

  8. Proceedings of the American Journalism Historians' Association Conference (Roanoke, Virginia, October 6-8, 1994). Part II.

    ERIC Educational Resources Information Center

    American Journalism Historians' Association.

    The second part of the proceedings of this conference of journalism historians contains the following 21 papers: "The First Information Revolution" (Irving Fang); "The 'Andromeda Strain' Phenomenon: Mutating Systems and International Communication Policy" (Eliza Tanner); "Guns or Butter?: Black Press Editorial Policy toward the Vietnam War"…

  9. 78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-13

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, July 9,...

  10. Cranfield Conference on Information Retrieval.

    ERIC Educational Resources Information Center

    Kuo, Franklin F.

    The Third Cranfield Conference on Mechanised Information Storage and Retrieval Systems was held on 20-23 July 1971 in Cranfield, England. The report describes a number of the key papers presented at this conference. (Author)

  11. Planning a Women's Studies Conference.

    ERIC Educational Resources Information Center

    Saul, Jean Rannells

    1992-01-01

    Describes the organization and implementation of a women's studies conference. Discusses fund raising, identifying speakers, developing publicity, local arrangement efforts, and providing hospitality. Includes nine recommendations and a suggested conference timeline. (CFR)

  12. A robust optimization methodology for preliminary aircraft design

    NASA Astrophysics Data System (ADS)

    Prigent, S.; Maréchal, P.; Rondepierre, A.; Druot, T.; Belleville, M.

    2016-05-01

    This article focuses on a robust optimization of an aircraft preliminary design under operational constraints. According to engineers' know-how, the aircraft preliminary design problem can be modelled as an uncertain optimization problem whose objective (the cost or the fuel consumption) is almost affine, and whose constraints are convex. It is shown that this uncertain optimization problem can be approximated in a conservative manner by an uncertain linear optimization program, which enables the use of the techniques of robust linear programming of Ben-Tal, El Ghaoui, and Nemirovski [Robust Optimization, Princeton University Press, 2009]. This methodology is then applied to two real cases of aircraft design and numerical results are presented.

  13. Korean and Japanese Press: A Study in Crisis.

    ERIC Educational Resources Information Center

    Ruidl, Richard A.

    During a time of crisis, it is instructive to examine the national press of Japan and Korea, two economic allies that view each other with suspicion. The Japanese press is relatively free and liberal-oriented on the domestic scene but is closely aligned with big business and government with regard to international concerns. The South Korean…

  14. State Free Expression Laws and Scholastic Press Censorship.

    ERIC Educational Resources Information Center

    Paxton, Mark; Dickson, Tom

    2000-01-01

    Surveys high school newspaper advisors, finding remarkably similar attitudes, in states with scholastic freedom of press laws and states without such laws, regarding scholastic press freedom, the way they exercise their duty in overseeing the newspaper, censorship and self-censorship, and controversy over newspaper content. Finds differences in…

  15. Nigerian Press under Imperialists and Dictators, 1903-1985.

    ERIC Educational Resources Information Center

    Ogbondah, Chris W.

    Comparing the Nigerian press during the colonial period of British rule and the post-independence period, a case study examined two press laws: the Newspaper Ordinance No. 10 of 1903, and Decree No. 4 of 1984 (Public Officers Protection against False Accusation Decree). Using qualitative research methodology, the study investigated how the…

  16. University Presses As "Gatekeepers of Ideas" within Society.

    ERIC Educational Resources Information Center

    Parsons, Paul

    University presses serve a prominent gatekeeping role in scholarly publishing because they, unlike commercial presses, can select books which transmit knowledge without being wholly captive to the marketplace. To analyze the cyclical flow that continually advances intellectual life, this selection procedure was examined with a study of the…

  17. University Presses See Opportunities in Shakeup in the Publishing World.

    ERIC Educational Resources Information Center

    McMillen, Liz

    1997-01-01

    Recent closings in the commercial publishing industry and reduction in serious nonfiction publications may open doors for university presses to fill the gap. University presses are already anticipating the changing market, reviewing book lists, and looking at new areas for publication development. Changes in the commercial publishing industry are…

  18. 19. REMAINS OF FLYWHEEL OF No. 1 PRESS PUMPING ENGINE. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. REMAINS OF FLYWHEEL OF No. 1 PRESS PUMPING ENGINE. GEARS ON EITHER SIDE OF THE FLYWHEEL WERE TURNED INTERMEDIATE GEARS WHICH POWERED THE PUMPS. - U.S. Steel Homestead Works, Press Shop No. 1, Along Monongahela River, Homestead, Allegheny County, PA

  19. 29 CFR 1910.217 - Mechanical power presses.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ..., hot bending and hot metal presses, forging presses and hammers, riveting machines and similar types of... equipment. Air controlling equipment shall be protected against foreign material and water entering the... shall be kept in good condition and free from obstructions, grease, oil, and water. (4) Overloading....

  20. 29 CFR 1910.217 - Mechanical power presses.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., hot bending and hot metal presses, forging presses and hammers, riveting machines and similar types of... equipment. Air controlling equipment shall be protected against foreign material and water entering the... shall be kept in good condition and free from obstructions, grease, oil, and water. (4) Overloading....

  1. 29 CFR 1910.217 - Mechanical power presses.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., hot bending and hot metal presses, forging presses and hammers, riveting machines and similar types of... equipment. Air controlling equipment shall be protected against foreign material and water entering the... surrounding floors shall be kept in good condition and free from obstructions, grease, oil, and water....

  2. Press Releases vs. Newspaper Coverage of California Supreme Court Decisions.

    ERIC Educational Resources Information Center

    Hale, F. Dennis

    1978-01-01

    A study comparing the coverage in newspapers and press releases regarding one year's decisions of the California Supreme Court revealed that the press releases influenced the kinds of decisions that were reported but not the quantity of coverage by the newspapers. (GT)

  3. 10. VIEW OF MODULE B, INSTALLATION OF A HYDRAULIC PRESS. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. VIEW OF MODULE B, INSTALLATION OF A HYDRAULIC PRESS. THE PRESS WILL EVENTUALLY BE CONNECTED TO A GLOVE BOX LINE. (9/29/69) - Rocky Flats Plant, Plutonium Manufacturing Facility, North-central section of Plant, just south of Building 776/777, Golden, Jefferson County, CO

  4. 9. DETAILED VIEW OF BRIQUETTING PRESS HOUSED IN A GLOVE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. DETAILED VIEW OF BRIQUETTING PRESS HOUSED IN A GLOVE BOX. THE PRESS FORMED SCRAP PLUTONIUM METAL FROM FOUNDRY AND FABRICATION PROCESSES INTO SMALL BRIQUETTES. THESE BRIQUETTES BECAME PART OF THE FEED MATERIALS FOR THE FOUNDRY. (5/6/59) - Rocky Flats Plant, Plutonium Fabrication, Central section of Plant, Golden, Jefferson County, CO

  5. 6. Interior, first floor front room. View of pressed metal ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. Interior, first floor front room. View of pressed metal ceiling visible through opening in dropped ceiling. (Below the pressed metal ceiling are three wooden joists, two electrical wires and the edges of the dropped ceiling where a panel had been removed). - Ferree Building, 417 Ninth Street, Northwest, Washington, District of Columbia, DC

  6. The Role of the Black Press during the "Great Migration."

    ERIC Educational Resources Information Center

    Jones, Felecia G.

    Between the years of 1916 and 1918 southern blacks began populating the urban centers of the north in a movement known as the "Great Migration." This movement was significant to the development of the black press, for it was during this period that the black press became a protest organ and rose to its greatest level of prominence and influence.…

  7. First Amendment Speech and Press Theory: Preferred Position Postulate Reexamined.

    ERIC Educational Resources Information Center

    Stonecipher, Harry W.

    If the United States Supreme Court is to exercise its historic role as guardian of the fundamental freedoms flowing from the speech and press clauses of the first amendment, it is imperative that those basic freedoms be placed in a preferred position. The preferred position doctrine provides adequate safeguards for both speech and press guarantees…

  8. New Realities for Scholarly Presses in Trying Economic Times

    ERIC Educational Resources Information Center

    Blakesley, David

    2014-01-01

    The author explains that Parlor Press is an independent publisher and distributor of scholarly and trade books in print and digital formats. It was founded in 2002 to address the need for an alternative scholarly, academic press attentive to emergent ideas and forms while maintaining the highest possible standards of quality, credibility, and…

  9. 7. VIEW OF HYDRAULIC HAMMER STAMPING PRESS ON SIDE A ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    7. VIEW OF HYDRAULIC HAMMER STAMPING PRESS ON SIDE A OF BUILDING 883. THIS TYPE OF PRESS WAS USED FOR BOTH STAINLESS STEEL AND FOR DEPLETED URANIUM. (7/2/86) - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

  10. 6. VIEW OF THE BRIQUETTING PRESS AND CHIP CLEANING HOOD. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    6. VIEW OF THE BRIQUETTING PRESS AND CHIP CLEANING HOOD. SCRAPS OF ENRICHED URANIUM FROM MACHINING OPERATIONS WERE CLEANED IN A SOLVENT BATH, THEN PRESSED INTO BRIQUETTS. THE BRIQUETTS WERE USED AS FEED MATERIAL FOR THE FOUNDRY. (4/4/66) - Rocky Flats Plant, General Manufacturing, Support, Records-Central Computing, Southern portion of Plant, Golden, Jefferson County, CO

  11. Sampling and analysis plan for ORNL filter press cake waste from the Liquid and Gaseous Waste Operations Department

    SciTech Connect

    Bartling, M.H.; Bayne, C.K.; Cunningham, G.R.

    1994-09-01

    This document defines the sampling and analytical procedures needed for the initial characterization of the filter press cake waste from the Process Waste Treatment Plant (PWTP) at the Oak Ridge National Laboratory (ORNL). It is anticipated that revisions to this document will occur as operating experience and sample results suggest appropriate changes be made. Application of this document will be controlled through the ORNL Waste Management and Remedial Action Division. The sampling strategy is designed to ensure that the samples collected present an accurate representation of the waste process stream. Using process knowledge and preliminary radiological activity screens, the filter press cake waste is known to contain radionuclides. Chemical characterization under the premise of this sampling and analysis plan will provide information regarding possible treatments and ultimately, disposal of filter press cake waste at an offsite location. The sampling strategy and analyses requested are based on the K-25 waste acceptance criteria and the Nevada Test Site Defense Waste Acceptance Criteria, Certification, and Transfer Requirements [2, NVO-325, Rev. 1]. The sampling strategy will demonstrate that for the filter press cake waste there is (1) an absence of RCRA and PCBs wastes, (2) an absence of transuranic (TRU) wastes, and (3) a quantifiable amount of radionuclide activity.

  12. Annual Conference Abstracts

    ERIC Educational Resources Information Center

    Engineering Education, 1976

    1976-01-01

    Presents the abstracts of 158 papers presented at the American Society for Engineering Education's annual conference at Knoxville, Tennessee, June 14-17, 1976. Included are engineering topics covering education, aerospace, agriculture, biomedicine, chemistry, computers, electricity, acoustics, environment, mechanics, and women. (SL)

  13. Government Quality Conference Proceedings

    NASA Technical Reports Server (NTRS)

    1992-01-01

    The Government Quality Conference was an attempt to bring together executive organizations and senior individuals in the Federal Government that have a desire to improve productivity. It was designed to provide an exchange of ideas based on experience, and to encourage individual management initiatives to tap the capabilities of Federal employees.

  14. Conducting Telephone Conference IEPs

    ERIC Educational Resources Information Center

    Patterson, Philip Patrick; Petit, Constance; Williams, Shandelyn

    2007-01-01

    Synchronizing the availability of team members for Individual Education Plan (IEP) meetings can be a daunting task. Fortunately, the Individuals with Disabilities Education Improvement Act of 2004 permits alternative means of conducting such meetings. An example of an alternate means is a telephone conference, whereby parents communicate over the…

  15. Conference Rules, Part 1

    ERIC Educational Resources Information Center

    Kerber, Linda K.

    2008-01-01

    Most academic conferences are preceded by some effort to make the sessions different from the usual format, but the usual format overwhelmingly prevails. That is: Each panel discussion runs no longer than two hours, during which two, three, or four specialists stand at a lectern and talk. Sometimes they will read a prepared paper; sometimes they…

  16. International waste management conference

    SciTech Connect

    Not Available

    1989-01-01

    This book contains the proceedings of the international waste management conference. Topics covered include: Quality assurance in the OCR WM program; Leading the spirit of quality; Dept. of Energy hazardous waste remedial actions program; management of hazardous waste projects; and System management and quality assurance.

  17. REGIONAL CONFERENCE SUMMARIES, 1966.

    ERIC Educational Resources Information Center

    Bureau of Adult, Vocational, and Technical Education (DHEW/OE), Washington, DC. Div. of Vocational and Technical Education.

    AN AVERAGE OF 200 TEACHER EDUCATORS, STATE DIRECTORS, LAYMEN, AND REPRESENTATIVES OF VARIOUS AGENCIES ATTENDED EACH OF NINE REGIONAL CONFERENCES CONDUCTED THROUGHOUT THE UNITED STATES TO DISCUSS THE INFLUENCE OF SOCIAL AND ECONOMIC CHANGES AND PROBLEMS IN PLANNING AND CONDUCTING VOCATIONAL AND TECHNICAL EDUCATION PROGRAMS. MAJOR SPEECHES PRESENTED…

  18. Grammar! A Conference Report.

    ERIC Educational Resources Information Center

    King, Lid, Ed.; Boaks, Peter, Ed.

    Papers from a conference on the teaching of grammar, particularly in second language instruction, include: "Grammar: Acquisition and Use" (Richard Johnstone); "Grammar and Communication" (Brian Page); "Linguistic Progression and Increasing Independence" (Bernardette Holmes); "La grammaire? C'est du bricolage!" ("Grammar? That's Hardware!") (Barry…

  19. Annual Conference Abstracts

    ERIC Educational Resources Information Center

    Journal of Engineering Education, 1972

    1972-01-01

    Includes abstracts of papers presented at the 80th Annual Conference of the American Society for Engineering Education. The broad areas include aerospace, affiliate and associate member council, agricultural engineering, biomedical engineering, continuing engineering studies, chemical engineering, civil engineering, computers, cooperative…

  20. Metabolic Engineering X Conference

    SciTech Connect

    Flach, Evan

    2015-05-07

    The International Metabolic Engineering Society (IMES) and the Society for Biological Engineering (SBE), both technological communities of the American Institute of Chemical Engineers (AIChE), hosted the Metabolic Engineering X Conference (ME-X) on June 15-19, 2014 at the Westin Bayshore in Vancouver, British Columbia. It attracted 395 metabolic engineers from academia, industry and government from around the globe.

  1. APPA 2011 Conference Highlights

    ERIC Educational Resources Information Center

    Facilities Manager, 2011

    2011-01-01

    This article presents highlights of APPA conference that was held on July 16-18, 2011. The highlights feature photos of 2011-2012 board of directors, outgoing senior regional representatives to the board, meritorious service award, APPA fellow, president's recognition and gavel exchange, and diamond business partner award.

  2. Creating Better Satellite Conferences.

    ERIC Educational Resources Information Center

    Horner, Tommy

    1998-01-01

    Presents four ways to improve broadcasts of company satellite conferences, including creative site selection (using facilities at educational institutions rather than hotel rooms); creative programming (using graphics and other interruptions to break up lectures or speeches); creative crew selection; and creative downlink site activities (to…

  3. Conference on Censorship.

    ERIC Educational Resources Information Center

    Meltzer, Milton; And Others

    In this collection of seven speeches from the University of Missouri Conference on Censorship, writers focus on the various aspects of censorship. Speeches are by (1) Milton Meltzer, who lauds those writers who were forced to battle with censors; (2) Enid Olson, who explores the censorship problems faced by teachers and school librarians; (3)…

  4. The interparliamentary conference

    SciTech Connect

    Not Available

    1990-01-01

    The purpose of this conference was to provide a forum for exchange of information on environmental problems with global origins and consequences. The areas of major concern included the following: global climate change; deforestation and desertification; preservation of biological diversity; safeguarding oceans and water resources; population growth; destruction of the stratospheric ozone layer; and sustainable development.

  5. Microbicides 2006 conference

    PubMed Central

    Ramjee, Gita; Shattock, Robin; Delany, Sinead; McGowan, Ian; Morar, Neetha; Gottemoeller, Megan

    2006-01-01

    Current HIV/AIDS statistics show that women account for almost 60% of HIV infections in Sub-Saharan Africa. HIV prevention tools such as male and female condoms, abstinence and monogamy are not always feasible options for women due to various socio-economic and cultural factors. Microbicides are products designed to be inserted in the vagina or rectum prior to sex to prevent HIV acquisition. The biannual Microbicides conference took place in Cape Town, South Africa from 23–26 April 2006. The conference was held for the first time on the African continent, the region worst affected by the HIV/AIDS pandemic. The conference brought together a record number of 1,300 scientists, researchers, policy makers, healthcare workers, communities and advocates. The conference provided an opportunity for an update on microbicide research and development as well as discussions around key issues such as ethics, acceptability, access and community involvement. This report discusses the current status of microbicide research and development, encompassing basic and clinical science, social and behavioural science, and community mobilisation and advocacy activities. PMID:17038196

  6. 2002 NASPSA Conference Abstracts.

    ERIC Educational Resources Information Center

    Journal of Sport & Exercise Psychology, 2002

    2002-01-01

    Contains abstracts from the 2002 conference of the North American Society for the Psychology of Sport and Physical Activity. The publication is divided into three sections: the preconference workshop, "Effective Teaching Methods in the Classroom;" symposia (motor development, motor learning and control, and sport psychology); and free…

  7. On the Conference Circuit.

    ERIC Educational Resources Information Center

    Tyckoson, David A.

    1987-01-01

    Summarizes three conference presentations on the effects of the economic climate on academic libraries in Iowa. These presentations focused on the impact of austerity budgets on collection development, library services and personnel, and possible management approaches to retrenchment in these areas. (CLB)

  8. Conference on Navajo Orthography.

    ERIC Educational Resources Information Center

    Ohannessian, Sirarpi; And Others

    This report on the Conference on Navajo Orthography, held in Albuquerque, New Mexico on May 2-3, 1969 constitutes a summary of the discussion and decisions of a meeting which was convened by the Center for Applied Linguistics under contract with the Bureau of Indian Affairs to agree on an orthography for the Navajo language. The immediate purpose…

  9. Report on the Conference.

    ERIC Educational Resources Information Center

    Brown, Ralph S.

    1983-01-01

    The themes of the 1982 annual conference of the American Association of University Professors are outlined. They include the importance of planning, selective versus across-the-board retrenchment strategies, definitions and problems of financial exigency, program reduction, and affirmative action claims. (MSE)

  10. Open Mind Conference

    NASA Technical Reports Server (NTRS)

    King, Alexander H.

    1995-01-01

    Open Mind, The Association for the achievement of diversity in higher education, met in conference in Albuquerque, New Mexico, between October 16 and 18, 1992. A number of workgroups met to discuss the goals, structure, and generally evaluate the Association and its achievements. A summary of the workgroup sessions and their minutes are included.

  11. A Conference of Hope.

    ERIC Educational Resources Information Center

    American Printing House for the Blind, Louisville, KY. Dept. of Educational Research.

    Presented are the proceedings of the First Historic Helen Keller World Conference on Services to Deaf-Blind Youths and Adults, held in New York City in September, 1977 on the theme "The Deaf-Blind Person in the Community." Reports have the following titles and authors: "Definition, Demography, Causes and Prevention of Deaf-Blindness; Finding and…

  12. IATUL Conference 1985.

    ERIC Educational Resources Information Center

    Information Services and Use, 1985

    1985-01-01

    Summarizes presentations at conference on theme "The future of information resources for science and technology and role of libraries": industrial and commercial use of national, regional, and university resources; balance between public- and private-sector resources; local access in national and regional context; access to information in…

  13. Modeling of planetesimal compaction by hot pressing

    NASA Astrophysics Data System (ADS)

    Neumann, W.; Breuer, D.; Spohn, T.

    2014-07-01

    Compaction of initially porous material prior to melting is an important process that has influenced the interior structure and the thermal evolution of planetesimals in their early history. On one hand, compaction decreases the porosity resulting in a reduction of the radius. On the other hand, the loss of porosity results in an increase of the thermal conductivity of the material and, thus, in a more efficient cooling. Porosity loss by hot pressing is the most efficient process of compaction in planetesimals and can be described by creep flow, which depends on temperature and stress. Hot pressing has been repeatedly modeled using a simplified approach, for which the porosity is gradually reduced in some fixed temperature interval between ~650 K and 700 K [see e.g. 1--3]. This approach neglects the dependence of compaction on stress. In the present study [see 4], we compare this ''parametrized'' method with a self-consistent calculation of porosity loss via a ''creep-related'' approach. We use our thermal evolution model from previous studies [5] to model compaction of an initially porous ordinary chondritic body and consider four basic packings of spherical dust grains (simple cubic, orthorhombic, rhombohedral, and body-centered cubic). Depending on the grain packing, we calculate the effective stress and the associated porosity change via the thermally activated creep flow. For comparison, compaction is also modeled by simply reducing the initial porosity linearly to zero between 650 and 700 K. Since we are interested in thermal metamorphism and not melting, we only consider bodies that experience a maximum temperature below the solidus temperature of the metal phase. For the creep related approach, the temperature interval in which compaction takes place depends strongly on the size of the planetesimal and is not fixed as assumed in the parametrized approach. Depending on the radius, the initial grain size, the activation energy, the initial porosity, and the

  14. Parallelization of Rocket Engine Simulator Software (PRESS)

    NASA Technical Reports Server (NTRS)

    Cezzar, Ruknet

    1997-01-01

    Parallelization of Rocket Engine System Software (PRESS) project is part of a collaborative effort with Southern University at Baton Rouge (SUBR), University of West Florida (UWF), and Jackson State University (JSU). The second-year funding, which supports two graduate students enrolled in our new Master's program in Computer Science at Hampton University and the principal investigator, have been obtained for the period from October 19, 1996 through October 18, 1997. The key part of the interim report was new directions for the second year funding. This came about from discussions during Rocket Engine Numeric Simulator (RENS) project meeting in Pensacola on January 17-18, 1997. At that time, a software agreement between Hampton University and NASA Lewis Research Center had already been concluded. That agreement concerns off-NASA-site experimentation with PUMPDES/TURBDES software. Before this agreement, during the first year of the project, another large-scale FORTRAN-based software, Two-Dimensional Kinetics (TDK), was being used for translation to an object-oriented language and parallelization experiments. However, that package proved to be too complex and lacking sufficient documentation for effective translation effort to the object-oriented C + + source code. The focus, this time with better documented and more manageable PUMPDES/TURBDES package, was still on translation to C + + with design improvements. At the RENS Meeting, however, the new impetus for the RENS projects in general, and PRESS in particular, has shifted in two important ways. One was closer alignment with the work on Numerical Propulsion System Simulator (NPSS) through cooperation and collaboration with LERC ACLU organization. The other was to see whether and how NASA's various rocket design software can be run over local and intra nets without any radical efforts for redesign and translation into object-oriented source code. There were also suggestions that the Fortran based code be

  15. STS-26 Preflight Press Briefing: 5 Man Crew. Part 6 of 9

    NASA Technical Reports Server (NTRS)

    1988-01-01

    This NASA KSC video release presents part of a press conference held prior to Discovery flight STS-26, the first shuttle mission flown following the 51-L Challenger accident. The video opens with a statement from Commander Frederick H. Hauck, and the introductions of crew members, Richard O. Covey, Pilot, and mission specialists, John M. Lounge, George D. Nelson, and David C. Hilmers. Some of the questions posed by scientific journalists addressed the following subjects: launch preparation in the month prior to flight, astronaut family anxieties in light of the Challenger accident, extent of safety measures made prior to flight, flight readiness firing, the crew escape system, civilians in space, conservative mission design, astronaut selection, mission turnaround and launch rate, and the ability to maintain a high level of scrutiny regarding safety on future missions.

  16. STS-88 Endeavour: TCDT-Press Q & A at KSCNF Auditorium

    NASA Technical Reports Server (NTRS)

    1998-01-01

    Live footage of the (Terminal Countdown Demonstration Test) TCDT shows the crew of STS-88, Commander Robert D. Cabana, Pilot Frederick W. Sturckow, and Mission Specialists Nancy J. Curry, Jerry L. Ross, James H. Newman, and Sergei K. Krikalev, participating in a press conference. The moderator Bruce Buckingham is seen introducing Bob Cabana, who then introduces the rest of the crewmembers. Cabana explains the mission and addresses the flight day activities. He includes the building of the Node 1 station element to the Functional Energy Block (FGB) which will already be in orbit, and two space-walks to connect power and data transmission cables. The crewmembers took turn answering questions from both the audience and via radio communication with the Johnson Space Center.

  17. ALA Conference 2009: Chicago Hope

    ERIC Educational Resources Information Center

    Berry, John N., III

    2009-01-01

    There is joy among those who have the funds to go to Chicago for the American Library Association (ALA) annual conference, July 9-15. Every librarian knows there is nothing better than a Chicago gathering, with the city's wonderful haunts, museums, restaurants, and fine memories of past conferences. The conference program covers nearly every…

  18. Summary: A Very Timely Conference

    NASA Astrophysics Data System (ADS)

    Wyse, Rosemary F. G.

    2012-04-01

    The conference poster includes a very apt phrase that describes a primary motivation for this conference: Time discovers truth. This aphorism, attributed to Seneca, was certainly affirmed by the many exciting talks and discussions at this conference, in both formal and informal settings.

  19. Hot isostatic press waste option study report

    SciTech Connect

    Russell, N.E.; Taylor, D.D.

    1998-02-01

    A Settlement Agreement between the Department of Energy and the State of Idaho mandates that all high-level radioactive waste now stored at the Idaho Chemical Processing Plant be treated so that it is ready to move out of Idaho for disposal by the target date of 2035. This study investigates the immobilization of all Idaho Chemical Processing Plant calcine, including calcined sodium bearing waste, via the process known as hot isostatic press, which produces compact solid waste forms by means of high temperature and pressure (1,050 C and 20,000 psi), as the treatment method for complying with the settlement agreement. The final waste product would be contained in stainless-steel canisters, the same type used at the Savannah River Site for vitrified waste, and stored at the Idaho National Engineering and Environmental Laboratory until a national geological repository becomes available for its disposal. The waste processing period is from 2013 through 2032, and disposal at the High Level Waste repository will probably begin sometime after 2065.

  20. Rotary press utilizing a flexible die wall.

    PubMed

    Amidon, G E; Smith, D P; Hiestand, E N

    1981-06-01

    A die with a flexible wall was constructed and evaluated on a specially modified instrumented rotary tablet press. The design permits an inward deflection of the die wall by a side punch, which rolls past a side compression roll during compression-decompression. The side compression roll is instrumented to monitor the applied side compression roll forces. On decompression, return of the die wall to its original position permits release of residual die wall pressure. The decreased residual die wall pressure can decrease fracture and capping of tablets for problem formulations. The performance was tested on three experimental formulations. For these formulations, tablets made in a conventional die exhibited severe capping problems. However, most tablets compressed in the special die were superior. With proper adjustment of punch and die wall compression forces, excellent tablets could be manufactured. The merits of the special die and modified tablet machine are substantiated, although this initial design did not provide adequate die wall pressure for all formulations. Further engineering efforts could result in practical production equipment.

  1. Filter-pressing of alumina dispersions

    SciTech Connect

    Fries, R.; Rand, B.

    1996-06-01

    The filter-pressing characteristics of aqueous alumina dispersions containing either submicron or nano-sized particles have been compared with respect to ionic strength. The highest green densities for both systems were achieved at electrolyte concentrations < 0.01 mol dm{sup -3} where long-range repulsive interparticle forces stabilize the slips. A slight increase in density with ionic strength in this range was attributed to an increase in the ratio of particle radius-to-double layer thickness, Ka. At higher electrolyte concentrations, above the critical coagulation concentration, the green densities dropped to significantly lower values due to the onset of flocculation and the formation of open particle networks characterized by strong attraction which resisted rearrangement into a dense green microstructure. The green densities of the compacts consolidated from the submicron dispersions at ionic strength > 1 mol dm{sup -3} were significantly higher than those prepared close to the critical coagulation concentration although the slips exhibited properties typical for a flocculated structure. The results may indicate the presence of short-range repulsive forces at high salt concentration for the submicron slips not accounted for by the classical DLVO-theory. In order to characterize the early stages of filter-cake consolidation the initial cake permeability was determined from the compaction curves.

  2. [Gender and health in the daily press].

    PubMed

    Revuelta, Gemma; Alonso, Inma; Tomás, Sonia; Guerrero, Marcela; Rohlfs, Izabella

    2004-05-01

    To have a better understanding on the role of the press in the communication of gender and health issues, the content of the five most spread newspapers in Spain was studied (El País, ABC, El Mundo, La Vanguardia and El Periódico de Catalunya) for five years (1997-2001) and the electronic version of The New York Times of the period 1990-1999. An unequal distribution was observed in the responsibility as for the information related to three aspects: positions of responsibility in the newspapers (out of 71 main posts, 67 were men and 4 women); the authors of the articles on health issues (61.2% men and 38,8% women, among the articles that include the author) and the mentioned information sources (81.43% men and 17.77% women). Among the 120 health issues that were covered during the period of the study, only 20 explicitly mentioned a woman (16.67%). Those subjects that included more frequently explicit references were: ablation, iatrogenics, sterilization, sexual and reproductive health, incontinence, beauty and domestic violence. The analysis of the approach to these subjects helped to identify the stereotypes of gender inequality, in the language as well as in the approach.

  3. AGU Science Policy Conference: 2012 Recap and 2013 Preview

    NASA Astrophysics Data System (ADS)

    Hankin, E. R.; Landau, E. A.; Uhlenbrock, K. M.

    2012-12-01

    In recent years, science has become inextricably linked to the political process. As such, it is more important now than ever for science to forge a better relationship with politics, for the health of both science and society. To help meet this need, the American Geophysical Union (AGU) strives to engage its members, shape policy, and inform society about the excitement of Earth and space science and its role in developing solutions for the sustainability of the planet. In the spring of 2012, AGU held its inaugural Science Policy Conference in Washington, D.C. The goal of this new conference is to ensure diverse discussions and viewpoints on the challenges and opportunities of Earth and space science policy. The meeting brought together more than 300 scientists, policymakers, industry professionals, members of the press, and other stakeholders to discuss Arctic, oceans, natural resources, and natural hazards science as they relate to challenges impacting society. Sessions such as Hydraulic Fracturing, Mitigation and Resiliency to Severe Weather, Governance and Security in the Arctic, and Ocean Acidification are examples of some of the intriguing science policy issues addressed at the conference. The AGU Science Policy Conference will be an annual spring event in Washington, D.C.

  4. 36th International Conference on High Energy Physics

    NASA Astrophysics Data System (ADS)

    The Australian particle physics community was honoured to host the 36th ICHEP conference in 2012 in Melbourne. This conference has long been the reference event for our international community. The announcement of the discovery of the Higgs boson at the LHC was a major highlight, with huge international press coverage. ICHEP2012 was described by CERN Director-General, Professor Rolf Heuer, as a landmark conference for our field. In additional to the Higgs announcement, important results from neutrino physics, from flavour physics, and from physics beyond the standard model also provided great interest. There were also updates on key accelerator developments such as the new B-factories, plans for the LHC upgrade, neutrino facilities and associated detector developments. ICHEP2012 exceeded the promise expected of the key conference for our field, and really did provide a reference point for the future. Many thanks to the contribution reviewers: Andy Bakich, Csaba Balazs, Nicole Bell, Catherine Buchanan, Will Crump, Cameron Cuthbert, Ben Farmer, Sudhir Gupta, Elliot Hutchison, Paul Jackson, Geng-Yuan Jeng, Archil Kobakhidze, Doyoun Kim, Tong Li, Antonio Limosani (Head Editor), Kristian McDonald, Nikhul Patel, Aldo Saavedra, Mark Scarcella, Geoff Taylor, Ian Watson, Graham White, Tony Williams and Bruce Yabsley.

  5. Bridging Science and Policy: The AGU Science Policy Conference

    NASA Astrophysics Data System (ADS)

    Hankin, E. R.; Uhlenbrock, K.; Landau, E. A.

    2013-12-01

    In recent years, science has become inextricably linked to the political process. As such, it is more important now than ever for science to forge a better relationship with politics, for the health of both science and society. To help meet this need, the American Geophysical Union (AGU) strives to engage its members, shape policy, and inform society about the excitement of Earth and space science and its role in developing solutions for the sustainability of the planet. In June 2013, AGU held its second annual Science Policy Conference in Washington, D.C. The goal of the conference is to provide a new forum for diverse discussions and viewpoints on the challenges and opportunities of science policy, with a focus on applications of Earth and space science that serve local, national, and international communities. The meeting brought together more than 300 scientists, policy makers, industry professionals, members of the press, and other stakeholders to discuss the topics concerning the Arctic, climate change, oceans, energy, technology and infrastructure, and natural hazards science as they relate to challenges impacting society. Sessions such as 'The Water-Energy Nexus,' 'Potential for Megadisasters,' 'The Changing Ocean and Impacts on Human Health,' and 'Drowning and Drought: Agricultural Impacts of Climate Change' are examples of some of the intriguing and timely science policy issues addressed at the conference. The findings from the conference were used to develop a summary report. The report highlights key facts and figures to be used as a resource in discussions with policy makers and other stakeholders regarding the conference topics. This presentation will discuss the goals and outcomes of the conference and how the event represents one of the many ways AGU is approaching its 'Science and Society' priority objective as part of the Union's strategic plan; namely by increasing the effectiveness and recognition of AGU among policy makers as an authoritative

  6. Energy Conferences and Symposia; (USA)

    SciTech Connect

    Osborne, J.H.; Simpson, W.F. Jr.

    1991-01-01

    Energy Conferences and Symposia, a monthly publication, was instituted to keep scientists, engineers, managers, and related energy professionals abreast of meetings sponsored by the Department of Energy (DOE) and by other technical associations. Announcements cover conference, symposia, workshops, congresses, and other formal meetings pertaining to DOE programmatic interests. Complete meeting information, including title, sponsor, and contact, is presented in the main section, which is arranged alphabetically by subject area. Within a subject, citations are sorted by beginning data of the meeting. New listings are indicated by a bullet after the conference number and DOE-sponsored conferences are indicated by a star. Two indexes are provided for cross referencing conference information. The Chronological Index lists conference titles by dates and gives the subject area where complete information they may be found. The Location Index is alphabetically sorted by the city where the conference will be held.

  7. Mississippi Climate & Hydrology Conference

    SciTech Connect

    Lawford, R.; Huang, J.

    2002-05-01

    The GEWEX Continental International Project (GCIP), which started in 1995 and completed in 2001, held its grand finale conference in New Orleans, LA in May 2002. Participants at this conference along with the scientists funded through the GCIP program are invited to contribute a paper to a special issue of Journal of Geophysical Research (JGR). This special JGR issue (called GCIP3) will serve as the final report on scientific research conducted by GCIP investigators. Papers are solicited on the following topical areas, but are not limited to, (1) water energy budget studies; (2) warm season precipitation; (3) predictability and prediction system; (4) coupled land-atmosphere models; (5) climate and water resources applications. The research areas cover observations, modeling, process studies and water resources applications.

  8. IEEE conference record -- Abstracts

    SciTech Connect

    Not Available

    1994-01-01

    This conference covers the following areas: computational plasma physics; vacuum electronic; basic phenomena in fully ionized plasmas; plasma, electron, and ion sources; environmental/energy issues in plasma science; space plasmas; plasma processing; ball lightning/spherical plasma configurations; plasma processing; fast wave devices; magnetic fusion; basic phenomena in partially ionized plasma; dense plasma focus; plasma diagnostics; basic phenomena in weakly ionized gases; fast opening switches; MHD; fast z-pinches and x-ray lasers; intense ion and electron beams; laser-produced plasmas; microwave plasma interactions; EM and ETH launchers; solid state plasmas and switches; intense beam microwaves; and plasmas for lighting. Separate abstracts were prepared for 416 papers in this conference.

  9. Metabolic Engineering VII Conference

    SciTech Connect

    Kevin Korpics

    2012-12-04

    The aims of this Metabolic Engineering conference are to provide a forum for academic and industrial researchers in the field; to bring together the different scientific disciplines that contribute to the design, analysis and optimization of metabolic pathways; and to explore the role of Metabolic Engineering in the areas of health and sustainability. Presentations, both written and oral, panel discussions, and workshops will focus on both applications and techniques used for pathway engineering. Various applications including bioenergy, industrial chemicals and materials, drug targets, health, agriculture, and nutrition will be discussed. Workshops focused on technology development for mathematical and experimental techniques important for metabolic engineering applications will be held for more in depth discussion. This 2008 meeting will celebrate our conference tradition of high quality and relevance to both industrial and academic participants, with topics ranging from the frontiers of fundamental science to the practical aspects of metabolic engineering.

  10. NSI conference support

    NASA Technical Reports Server (NTRS)

    Aaron, Susan

    1991-01-01

    One of the many services NSI provides as an extension of customer/user support is to attend major scientific conferences. The conference effort provides NASA/OSSA scientists with many benefits: (1) scientist get to see NSI in action; they utilize the network to read email, and have recently begun to demonstrate their scientific research to their colleagues; (2) scientist get an opportunity to meet and interact with NSI Staff, which gives scientists a chance to get status on their requirements, ask about network status, get acquainted with our procedures, and learn about services; and (3) scientists are exposed to networking in a larger sense; particularly by knowing about other NASA groups who provide valuable scientific resources over the Internet.

  11. Genome sequencing conference II

    SciTech Connect

    Not Available

    1990-01-01

    Genome Sequencing Conference 2 was held September 30 to October 30, 1990. 26 speaker abstracts and 33 poster presentations were included in the program report. New and improved methods for DNA sequencing and genetic mapping were presented. Many of the papers were concerned with accuracy and speed of acquisition of data with computers and automation playing an increasing role. Individual papers have been processed separately for inclusion on the database.

  12. Moldova. Historic regional conference.

    PubMed

    Moshin, V

    1995-05-01

    The Directorate of Maternal and Child Health and the Family Planning Association of Moldova organized a regional conference, which was held October 18-19, 1994, in Kishinev, Moldova, with the support of the United Nations Population Fund (UNFPA), the World Health Organization (WHO), and the International Planned Parenthood Federation (IPPF). The conference,"Problems of Family Planning in Eastern Europe," was attended by approximately 400 Moldovan delegates of governmental and nongovernmental organizations (NGOs), and by 25 delegates from Romania, Russia, Belarus, the Ukraine, and Georgia. The President of Moldova and the Ministry of Public Health of Moldova gave their approval. The main objectives of the conference were to inform the public about the recommendations of the ICPD, to analyze the status of women's reproductive health and family planning in Eastern Europe, and to find ways of implementing the ICPD Plan of Action. Major problems identified during the conference were: 1) the social and economic problems facing most families; 2) the high rate of morbidity and mortality; 3) the decrease in birth rate; 4) the increase in abortions; 5) the rising incidence of venereal disease; and 6) the absence of an effective family planning system. It was agreed that cooperation between governments and NGOs is essential in designing population programs for each country. The following goals were set: 1) to provide populations with sufficient contraceptives; 2) to actively promote family planning concepts through the mass media; 3) to train specialists and to open family planning offices and centers; 4) to introduce sex education in the curricula of Pedagogical Institutes; and 5) to create national and regional statistical and sociological databases on population issues.

  13. 2004 Mutagenesis Gordon Conference

    SciTech Connect

    Dr. Sue Jinks-Robertson

    2005-09-16

    Mutations are genetic alterations that drive biological evolution and cause many, if not all, human diseases. Mutation originates via two distinct mechanisms: ''vertical'' variation is de novo change of one or few bases, whereas ''horizontal'' variation occurs by genetic recombination, which creates new mosaics of pre-existing sequences. The Mutagenesis Conference has traditionally focused on the generation of mutagenic intermediates during normal DNA synthesis or in response to environmental insults, as well as the diverse repair mechanisms that prevent the fixation of such intermediates as permanent mutations. While the 2004 Conference will continue to focus on the molecular mechanisms of mutagenesis, there will be increased emphasis on the biological consequences of mutations, both in terms of evolutionary processes and in terms of human disease. The meeting will open with two historical accounts of mutation research that recapitulate the intellectual framework of this field and thereby place the current research paradigms into perspective. The two introductory keynote lectures will be followed by sessions on: (1) mutagenic systems, (2) hypermutable sequences, (3) mechanisms of mutation, (4) mutation avoidance systems, (5) mutation in human hereditary and infectious diseases, (6) mutation rates in evolution and genotype-phenotype relationships, (7) ecology, mutagenesis and the modeling of evolution and (8) genetic diversity of the human population and models for human mutagenesis. The Conference will end with a synthesis of the meeting as the keynote closing lecture.

  14. 57. ORIGINAL TILE PRESS AND EXPERIMENTAL DENTAL KILN, SECOND FLOOR, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    57. ORIGINAL TILE PRESS AND EXPERIMENTAL DENTAL KILN, SECOND FLOOR, NORTH WING, HENRY MERCER USED THE KILN FOR HIS EARLIEST GLAZE TESTS. THE PRESS WAS DESIGNED TO BE USED WITH METAL CASED MOLDS. SINCE ONLY THE EARLIEST TILE DESIGNS ARE IN METAL CASES. THIS TECHNIQUE WAS PROBABLY DISCONTINUED. THIS PRESS WAS, THEREFORE, PROBABLY NOT USED EXTENSIVELY AT THIS SITE. THE UPPER PART OF GLAZE KILN No. 2 IS AT THE LEFT REAR. - Moravian Pottery & Tile Works, Southwest side of State Route 313 (Swamp Road), Northwest of East Court Street, Doylestown, Bucks County, PA

  15. Application of exopolysaccharides to improve the performance of ceramic bodies in the unidirectional dry pressing process

    NASA Astrophysics Data System (ADS)

    Caneira, Inês; Machado-Moreira, Bernardino; Dionísio, Amélia; Godinho, Vasco; Neves, Orquídia; Dias, Diamantino; Saiz-Jimenez, Cesareo; Miller, Ana Z.

    2015-04-01

    Ceramic industry represents an important sector of economic activity in the European countries and involves complex and numerous manufacturing processes. The unidirectional dry pressing process includes milling and stirring of raw materials (mainly clay and talc minerals) in aqueous suspensions, followed by spray drying to remove excess water obtaining spray-dried powders further subjected to dry pressing process (conformation). However, spray-dried ceramic powders exhibit an important variability in their performance when subjected to the dry pressing process, particularly in the adhesion to the mold and mechanical strength, affecting the quality of the final conformed ceramic products. Therefore, several synthetic additives (deflocculants, antifoams, binders, lubricants and plasticizers) are introduced in the ceramic slips to achieve uniform and homogeneous pastes, conditioning their rheological properties. However, an important variability associated with the performance of the conformed products is still reported. Exopolysaccharides or Extracellular Polymeric Substances (EPS) are polymers excreted by living organisms, such as bacteria, fungi and algae, which may confer unique and potentially interesting properties with potential industrial uses, such as viscosity control, gelation, and flocculation. Polysaccharides, such as pullulan, gellan, carrageenan and xanthan have found a wide range of applications in food, pharmaceutical, petroleum, and in other industries. The aim of this study was the assessment of exopolysaccharides as natural additives to optimize the performance of spray-dried ceramic powders during the unidirectional dry pressing process, replacing the synthetic additives used in the ceramic production process. Six exopolysaccharides, namely pullulan, gellan, xanthan gum, κappa- and iota-carrageenan, and guar gum were tested in steatite-based spray-dried ceramic powders at different concentrations. Subsequently, these ceramic powders were

  16. Building dialogue on complex conservation issues in a conference setting.

    PubMed

    Rock, Jenny; Sparrow, Andrew; Wass, Rob; Moller, Henrik

    2014-10-01

    Dialogue about complex science and society issues is important for contemporary conservation agendas. Conferences provide an appropriate space for such dialogue, but despite its recognized worth, best practices for facilitating active dialogue are still being explored. Face-to-face (FTF) and computer-mediated communication (CMC) are two approaches to facilitating dialogue that have different strengths. We assessed the use of these approaches to create dialogue on cultural perspectives of conservation and biodiversity at a national ecology conference. In particular, we aimed to evaluate their potential to enhance dialogue through their integrated application. We used an interactive blog to generate CMC on participant-sourced issues and to prime subsequent discussion in an FTF conference workshop. The quantity and quality of both CMC and FTF discussion indicated that both approaches were effective in building dialogue. Prior to the conference the blog averaged 126 views per day, and 44 different authors contributed a total of 127 comments. Twenty-five participants subsequently participated in active FTF discussion during a 3-h workshop. Postconference surveys confirmed that CMC had developed participants' thinking and deepened FTF dialogue; 88% indicated specifically that CMC helped facilitate the FTF discussion. A further 83% of respondents concluded that preliminary blog discussion would be useful for facilitating dialogue at future conferences. PMID:24962421

  17. Building dialogue on complex conservation issues in a conference setting.

    PubMed

    Rock, Jenny; Sparrow, Andrew; Wass, Rob; Moller, Henrik

    2014-10-01

    Dialogue about complex science and society issues is important for contemporary conservation agendas. Conferences provide an appropriate space for such dialogue, but despite its recognized worth, best practices for facilitating active dialogue are still being explored. Face-to-face (FTF) and computer-mediated communication (CMC) are two approaches to facilitating dialogue that have different strengths. We assessed the use of these approaches to create dialogue on cultural perspectives of conservation and biodiversity at a national ecology conference. In particular, we aimed to evaluate their potential to enhance dialogue through their integrated application. We used an interactive blog to generate CMC on participant-sourced issues and to prime subsequent discussion in an FTF conference workshop. The quantity and quality of both CMC and FTF discussion indicated that both approaches were effective in building dialogue. Prior to the conference the blog averaged 126 views per day, and 44 different authors contributed a total of 127 comments. Twenty-five participants subsequently participated in active FTF discussion during a 3-h workshop. Postconference surveys confirmed that CMC had developed participants' thinking and deepened FTF dialogue; 88% indicated specifically that CMC helped facilitate the FTF discussion. A further 83% of respondents concluded that preliminary blog discussion would be useful for facilitating dialogue at future conferences.

  18. Ten years of science news: A longitudinal analysis of scientific culture in the Spanish digital press.

    PubMed

    Groves, Tamar; Figuerola, Carlos G; Quintanilla, Miguel Á

    2016-08-01

    This article presents our study of science coverage in the digital Spanish press over the last decade. We employed automated information retrieval procedures to create a corpus of 50,763 text units dealing with science and technology, and used automated text-analysis procedures in order to provide a general picture of the structure, characteristics and evolution of science news in Spain. We found between 6% and 7% of science coverage, a clear high proportion of biomedicine and predominance of science over technology, although we also detected an increase in technological content during the second half of the decade. Analysing the extrinsic and intrinsic features of science culture, we found a predominance of intrinsic features that still need further analysis. Our attempt to use specialised software to examine big data was effective, and allowed us to reach these preliminary conclusions.

  19. Ten years of science news: A longitudinal analysis of scientific culture in the Spanish digital press.

    PubMed

    Groves, Tamar; Figuerola, Carlos G; Quintanilla, Miguel Á

    2016-08-01

    This article presents our study of science coverage in the digital Spanish press over the last decade. We employed automated information retrieval procedures to create a corpus of 50,763 text units dealing with science and technology, and used automated text-analysis procedures in order to provide a general picture of the structure, characteristics and evolution of science news in Spain. We found between 6% and 7% of science coverage, a clear high proportion of biomedicine and predominance of science over technology, although we also detected an increase in technological content during the second half of the decade. Analysing the extrinsic and intrinsic features of science culture, we found a predominance of intrinsic features that still need further analysis. Our attempt to use specialised software to examine big data was effective, and allowed us to reach these preliminary conclusions. PMID:25847718

  20. Pyrometry in the Multianvil Press: New approach for temperature measurement in large volume press experiments

    NASA Astrophysics Data System (ADS)

    Sanehira, T.; Wang, Y.; Prakapenka, V.; Rivers, M. L.

    2008-12-01

    Temperature measurement in large volume press experiments has been based on thermocouple emf, which has well known problems: unknown pressure dependence of emf [e.g., 1], chemical reaction between thermocouple and other materials, deformation related texture development in the thermocouple wires [2], and so on. Thus, different techniques to measure temperatures in large volume press experiments other than thermocouples are required to measure accurate temperatures under high pressures. Here we report a new development using pyrometry in the multianvil press, where temperatures are derived on the basis of spectral radiometry. Several high pressure runs were conducted using the 1000 ton press with a DIA module installed at 13 ID-D GSECARS beamline at Advanced Photon Source (APS) [3]. The cubic pressure medium, 14 mm edge length, was made of soft-fired pyrophyllite with a graphite furnace. A moissanite (SiC) single crystal was built inside the pressure medium as a window for the thermal emission signal to go through. An MgO disk with 1.0 mm thickness was inserted in a gap between the top of the SiC crystal and thermocouple hot junction. The bottom of the window crystal was in direct contact with the tip of the anvil, which had a 1.5 mm diameter hole drilled all the way through the anvil axis. An optical fiber was inserted in this hole and the open end of fiber was in contact with the SiC crystal. Thermal spectral radiance from the inner cell assembly was obtained via the fiber and recorded by an Ocean Optics HP2000 spectrometer. The system response of spectrometer was calibrated by a tungsten ribbon ramp (OL550S, Optronic Laboratories, Inc.) with standard of spectral radiance. The cell assembly was compressed up to target value of 15 tons and then temperature was increased up to 1573 K. Radiation spectra were mainly obtained above 873 K and typical integration time was 1 ms or 10 ms. Data collection was done in the process of increase and decrease of temperature. In

  1. PREFACE: Wake Conference 2015

    NASA Astrophysics Data System (ADS)

    Barney, Andrew; Nørkær Sørensen, Jens; Ivanell, Stefan

    2015-06-01

    The 44 papers in this volume constitute the proceedings of the 2015 Wake Conference, held in Visby on the island of Gotland in Sweden. It is the fourth time this conference has been held. The Wake Conference series started in Visby, where it was held in 2009 and 2011. In 2013 it took place in Copenhagen where it was combined with the International Conference on Offshore Wind Energy and Ocean Energy. In 2015 it is back where it started in Visby, where it takes place at Uppsala University Campus Gotland, June 9th-11th. The global yearly production of electrical energy by wind turbines has grown tremendously in the past decade and it now comprises more than 3% of the global electrical power consumption. Today the wind power industry has a global annual turnover of more than 50 billion USD and an annual average growth rate of more than 20%. State-of-the-art wind turbines have rotor diameters of up to 150 m and 8 MW installed capacity. These turbines are often placed in large wind farms that have a total production capacity corresponding to that of a nuclear power plant. In order to make a substantial impact on one of the most significant challenges of our time, global warming, the industry's growth has to continue for a decade or two yet. This in turn requires research into the physics of wind turbine wakes and wind farms. Modern wind turbines are today clustered in wind farms in which the turbines are fully or partially influenced by the wake of upstream turbines. As a consequence, the wake behind the wind turbines has a lower mean wind speed and an increased turbulence level, as compared to the undisturbed flow outside the farm. Hence, wake interaction results in decreased total production of power, caused by lower kinetic energy in the wind, and an increase in the turbulence intensity. Therefore, understanding the physical nature of the vortices and their dynamics in the wake of a turbine is important for the optimal design of a wind farm. This conference is aimed

  2. Architecture of conference control functions

    NASA Astrophysics Data System (ADS)

    Kausar, Nadia; Crowcroft, Jon

    1999-11-01

    Conference control is an integral part in many-to-many communications that is used to manage and co-ordinate multiple users in conferences. There are different types of conferences which require different types of control. Some of the features of conference control may be user invoked while others are for internal management of a conference. In recent years, ITU (International Telecommunication Union) and IETF (Internet Engineering Task Force) have standardized two main models of conferencing, each system providing a set of conference control functionalities that are not easily provided in the other one. This paper analyzes the main activities appropriate for different types of conferences and presents an architecture for conference control called GCCP (Generic Conference Control Protocol). GCCP interworks different types of conferencing and provides a set of conference control functions that can be invoked by users directly. As an example of interworking, interoperation of IETF's SIP and ITU's H.323 call control functions have been examined here. This paper shows that a careful analysis of a conferencing architecture can provide a set of control functions essential for any group communication model that can be extensible if needed.

  3. 2010 Tetrapyrroles, Chemistry & Biology of Gordon Research Conference

    SciTech Connect

    Angela Wilks

    2010-07-30

    The objective of the Chemistry & Biology of Tetrapyrroles Gordon Conference is to bring together researchers from diverse disciplines that otherwise would not interact. By bringing biologists, chemists, engineers and clinicians with a common interest in tetrapyrroles the conference provides a forum for cross-disciplinary ideas and collaboration. The perspective provided by biologists, chemists, and clinicians working in fields such as newly discovered defects in human porphyrin metabolism, the myriad of strategies for light harvesting in photosynthetic organisms, novel tetrapyrroles that serve as auxiliary chromophores or enzyme cofactors, synthetic strategies in the design of novel tetrapyrrole scaffolds, and tetrapyrrole based cell signaling and regulatory systems, makes this conference unique in the field. Over the years the growing evidence for the role of tetrapyrroles and their reactive intermediates in cell signaling and regulation has been of increasing importance at this conference. The 2010 conference on Chemistry & Biology of Tetrapyrroles will focus on many of these new frontiers as outlined in the preliminary program listed. Speakers will emphasize unpublished results and new findings in the field. The oral sessions will be followed by the highly interactive afternoon poster sessions. The poster sessions provide all conferees with the opportunity to present their latest research and to exchange ideas in a more informal setting. As in the past, this opportunity will continue during the nightly social gathering that takes place in the poster hall following the evening lectures. All conferees are encouraged to submit and present posters. At the conference the best poster in the areas of biology, chemistry and medicine will be selected by a panel of previous conference chairs.

  4. 5. Interior, second floor. Pressed metal ceiling, and wooden floors ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. Interior, second floor. Pressed metal ceiling, and wooden floors visible. Overhead light source toward rear of building indicates location of skylight. - 25-27 East Hanover Street (Commercial Building), 25-27 East Hanover Street, Trenton, Mercer County, NJ

  5. Renovation of the hot press in the Plutonium Experimental Facility

    SciTech Connect

    Congdon, J.W.; Nelson, G.H.

    1990-03-05

    The Plutonium Experimental Facility (PEF) will be used to develop a new fuel pellet fabrication process and to evaluate equipment upgrades. The facility was used from 1978 until 1982 to optimize the parameters for fuel pellet production using a process which was developed at Los Alamos National Laboratory. The PEF was shutdown and essentially abandoned until mid-1987 when the facility renovations were initiated by the Actinide Technology Section (ATS) of SRL. A major portion of the renovation work was related to the restart of the hot press system. This report describes the renovations and modifications which were required to restart the PEF hot press. The primary purpose of documenting this work is to help provide a basis for Separations to determine the best method of renovating the hot press in the Plutonium Fuel Fabrication (PuFF) facility. This report also includes several SRL recommendations concerning the renovation and modification of the PuFF hot press. 4 refs.

  6. Hot isostatic pressing of ceramic waste from spent nuclear fuel.

    SciTech Connect

    Bateman, K.J.; Rigg, R.H.; Wiest, J.D.

    2002-03-08

    Argonne National Laboratory has developed a process to immobilize waste salt containing fission products, uranium, and transuranic elements as chlorides in a glass-bonded ceramic waste form. This salt was generated in the electrorefining operation used in electrometallurgical treatment of spent Experimental Breeder Reactor-II fuel. The ceramic waste process culminated with a hot isostatic pressing operation. This paper reviews the installation and operation of a hot isostatic press in a radioactive environment. Processing conditions for the hot isostatic press are presented for non-irradiated material and irradiated material. Sufficient testing was performed to demonstrate that a hot isostatic press could be used as the final step of the processing of ceramic waste for the electrometallurgical spent fuel treatment process.

  7. Study of pressing machine pressure relief characteristics based on AMESim

    NASA Astrophysics Data System (ADS)

    Wang, Chuanli; Zhang, Hui; Yu, Caofeng; Wu, Xiaolei

    2016-01-01

    When a working cylinder of the pressing machine working cylinder was stuck and underwent retracted conversion, pressure shock was high in working cylinder cavity and flow pulsation was distinct in the pipeline due to the high working pressure and frequent retracted transformation of the working cylinder, which not only shortened the service life of the pressing machine, but also exerted serious impacts on the machining precision and quality, especially after the pressing machine applied loads and high-pressure oil in work rod end cavity of working cylinder needed to be relieved in a short time. In order to research and analyze the better pressure relief characteristics of the two types of pressure relief circuits of the pressing machine, the paper established models, carried out simulation and analysis and then made contrastive analysis of the working cylinder rod velocity, rod acceleration and port pressure pulsation according to the simulation results.

  8. 13. RADIAL DRILL, ENGINE LATHE, DRILL PRESS, AND GRINDER (L ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. RADIAL DRILL, ENGINE LATHE, DRILL PRESS, AND GRINDER (L TO R)-LOOKING SOUTHEAST. - W. A. Young & Sons Foundry & Machine Shop, On Water Street along Monongahela River, Rices Landing, Greene County, PA

  9. INTERIOR VIEW WITH CARLTON RADIAL ARM DRILL PRESS (THE CARLTON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW WITH CARLTON RADIAL ARM DRILL PRESS (THE CARLTON MACHINE TOOL CO., CINCINNATI, OHIO) WITH MACHINE OPERATOR, EDDIE BURTTRAM. - O'Neal Steel, Incorporated, Fabrication Shop, 744 Forty-first Avenue North, Birmingham, Jefferson County, AL

  10. Drill press in foreground is one of few machine tools ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Drill press in foreground is one of few machine tools in operating condition which is still operated occasionally for public demonstrations. - Thomas A. Edison Laboratories, Building No. 5, Main Street & Lakeside Avenue, West Orange, Essex County, NJ

  11. 5. FOURTH FLOOR, HOTEL SOAP LINES TO NORTHWEST: PRESS (LEFT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    5. FOURTH FLOOR, HOTEL SOAP LINES TO NORTHWEST: PRESS (LEFT CENTER), MANUAL CUTTERS (CENTER, RIGHT CENTER) - Colgate & Company Jersey City Plant, Building No. B-15, 90-96 Greene Street, Jersey City, Hudson County, NJ

  12. AUTOMOTIVE REPAIR SHOP, DETAIL OF FABRICATING PRESS IN EAST END ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    AUTOMOTIVE REPAIR SHOP, DETAIL OF FABRICATING PRESS IN EAST END OF MAIN WING, WITH SCALE. - Cedar City Automotive Repair Shop, Automotive Repair Shop, 820 North Main Street, Cedar City, Iron County, UT

  13. 2ND FLOOR HALLWAY LOOKING EAST, NOTE PRESSED TIN CEILING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2ND FLOOR HALLWAY LOOKING EAST, NOTE PRESSED TIN CEILING - New York State Soldiers & Sailors Home, Building No. 29, Department of Veterans Affairs Medical Center, 76 Veterans Avenue, Bath, Steuben County, NY

  14. 8. Second floor front apartment showing ornately painted pressed metal ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. Second floor front apartment showing ornately painted pressed metal ceiling, as well as modern partitions and wall treatments. View looking north. - Franklin Grocery Company Building, 1 South Main Street, Franklin, Merrimack County, NH

  15. Differential Suppression by Punishment of Nonconsummatory Licking and Lever Pressing

    ERIC Educational Resources Information Center

    Walters, Gary C.; Herring, Barbara

    1978-01-01

    Five experiments investigated the differential effects of shock punishment on nonconsummatory licking (dry licking) and lever pressing. Results support a motivationally based theory of punishment involving the role of incentive stimuli associated with the particular responses studied. (Editor/RK)

  16. 10. INTERIOR VIEW OF EYE PRESS AREA, SAME AS ABOVE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    10. INTERIOR VIEW OF EYE PRESS AREA, SAME AS ABOVE WITH MEN AT WORK: CRAIG TSCHAPPAT, HEATER; JEFF MILLER, OPERATOR; JOHN TOTH, SAWMAN - Warwood Tool Company, Foot of Nineteenth Street, Wheeling, Ohio County, WV

  17. Looking north into oing press of the saw line in ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Looking north into o-ing press of the saw line in bay 7 of the main pipe mill building. - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

  18. Oing press of the saw line in bay 7 of ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    O-ing press of the saw line in bay 7 of the main pipe mill building looking northeast. - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

  19. VIEW OF INTERIOR SPACE WITH HUFFORD BULLDOZIER FORMING PRESS IN ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF INTERIOR SPACE WITH HUFFORD BULLDOZIER FORMING PRESS IN FOREGROUND, FACING NORTHWEST. - Douglas Aircraft Company Long Beach Plant, Aircraft Parts Shipping & Receiving Building, 3855 Lakewood Boulevard, Long Beach, Los Angeles County, CA

  20. VIEW OF INTERIOR SPACE WITH RECTANGULAR SHAPE STRETCH PRESS CONTAINMENT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF INTERIOR SPACE WITH RECTANGULAR SHAPE STRETCH PRESS CONTAINMENT PIT IN BACKGROUND, FACING NORTH. - Douglas Aircraft Company Long Beach Plant, Aircraft Parts Shipping & Receiving Building, 3855 Lakewood Boulevard, Long Beach, Los Angeles County, CA

  1. VIEW OF INTERIOR SPACE WITH SQUARE SHAPE STRETCH PRESS CONTAINMENT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF INTERIOR SPACE WITH SQUARE SHAPE STRETCH PRESS CONTAINMENT PITS CENTER, FACING NORTH. - Douglas Aircraft Company Long Beach Plant, Aircraft Parts Shipping & Receiving Building, 3855 Lakewood Boulevard, Long Beach, Los Angeles County, CA

  2. Making News: How the IL Movement Cultivates Media Relationships--A National Conference (Oklahoma City, Oklahoma, October 16-18, 2002). Participant's Manual.

    ERIC Educational Resources Information Center

    Burnett, Jennifer; Kemp, Janine Bertram; Williams, Brad; Jones, Darrell Lynn; Buppapong, Raweewan; Langbehn, Kristy; Petty, Richard; Heinsohn, Dawn

    The participant's manual contains training materials for a national conference on cultivating media relations in agencies concerned with independent living for people with disabilities. Preliminary materials include the conference agenda, background information about the trainers, organizational information on Independent Living Research…

  3. The Changing Academic Profession in International Comparative and Quantitative Perspectives. Report of the International Conference on the Changing Academic Profession Project, 2008. RIHE International Seminar Reports. No.12

    ERIC Educational Resources Information Center

    Research Institute for Higher Education, Hiroshima University (NJ3), 2008

    2008-01-01

    This year the Research Institute for Higher Education in Hiroshima University hosted an international conference in close collaboration with Hijiyama University. The main purpose of the 2008 conference was to enable the participants to give preliminary country/regional reports based on their national/regional surveys. This publication reports the…

  4. Grain refinement of aluminum using equal-channel angular pressing

    SciTech Connect

    Horita, Z.; Furukawa, M.; Nemoto, M.; Langdon, T.G.

    2000-07-01

    Using the technique of equal-channel angular (ECA) pressing, it is possible to reduce the grain size of polycrystalline materials to the submicrometer level. Thus, this processing technique has the potential for producing materials which may exhibit superplasticity. This paper describes various factors affecting the development and evolution of the microstructure produced by ECA pressing. Optimization of such factors is then presented for the advent of superplasticity.

  5. Low-loss binder for hot pressing boron nitride

    DOEpatents

    Maya, Leon

    1991-01-01

    Borazine derivatives used as low-loss binders and precursors for making ceramic boron nitride structures. The derivative forms the same composition as the boron nitride starting material, thereby filling the voids with the same boron nitride material upon forming and hot pressing. The derivatives have a further advantage of being low in carbon thus resulting in less volatile byproduct that can result in bubble formation during pressing.

  6. 55. QUARRY TILE CUTTERS, SECOND FLOOR, NORTH WING. WORKERS PRESSED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    55. QUARRY TILE CUTTERS, SECOND FLOOR, NORTH WING. WORKERS PRESSED THE CUTTERS INTO SLABS OF CLAY, LIFTED THEM ONTO DRYING BOARDS AND PRESSED THE PLUNGERS TO RELEASE THE CUT TILES. REPRODUCTIONS CUTTERS ARE NOT USED IN PRODUCTION. WOODEN FORMS FOR PRODUCING CLAY SLABS WITH ROLLING PINS REST AGAINST THE WALL. - Moravian Pottery & Tile Works, Southwest side of State Route 313 (Swamp Road), Northwest of East Court Street, Doylestown, Bucks County, PA

  7. Bending strength studies on hot-pressed silicon carbide

    NASA Technical Reports Server (NTRS)

    Kriegesmann, J.

    1984-01-01

    The 4-point bending strength of 4 grades of hot-pressed SiC was determined at different temperatures. With a transgranular mode of fracture the values for bending strength are retained up to high temperatures. For intergranular fracture the decrease of strength is governed by subcritical crack growth. The intergranular fracture is caused by a high content of silicate glassy phase at the grain boundaries of hot-pressed SiC.

  8. VIEW OF THE INSTALLATION OF AN EXTRUSION PRESS IN THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    VIEW OF THE INSTALLATION OF AN EXTRUSION PRESS IN THE HIGH BAY AREA OF BUILDING 865. THE EXTRUSION PRESS WAS USED TO PRODUCE CYLINDRICAL BARS, HOLLOW TUBES, AND SHAPES WITH IRREGULAR CROSS-SECTIONS BY FORCING PREHEATED METAL THROUGH A DIE ORIFICE UNDER HIGH PRESSURE. (5/22/70) - Rocky Flats Plant, Metal Research & Development Laboratory, South of Central Avenue at south end of terminus of Ninth Avenue, Golden, Jefferson County, CO

  9. Parallelization of Rocket Engine Simulator Software (PRESS)

    NASA Technical Reports Server (NTRS)

    Cezzar, Ruknet

    1998-01-01

    We have outlined our work in the last half of the funding period. We have shown how a demo package for RESSAP using MPI can be done. However, we also mentioned the difficulties with the UNIX platform. We have reiterated some of the suggestions made during the presentation of the progress of the at Fourth Annual HBCU Conference. Although we have discussed, in some detail, how TURBDES/PUMPDES software can be run in parallel using MPI, at present, we are unable to experiment any further with either MPI or PVM. Due to X windows not being implemented, we are also not able to experiment further with XPVM, which it will be recalled, has a nice GUI interface. There are also some concerns, on our part, about MPI being an appropriate tool. The best thing about MPr is that it is public domain. Although and plenty of documentation exists for the intricacies of using MPI, little information is available on its actual implementations. Other than very typical, somewhat contrived examples, such as Jacobi algorithm for solving Laplace's equation, there are few examples which can readily be applied to real situations, such as in our case. In effect, the review of literature on both MPI and PVM, and there is a lot, indicate something similar to the enormous effort which was spent on LISP and LISP-like languages as tools for artificial intelligence research. During the development of a book on programming languages [12], when we searched the literature for very simple examples like taking averages, reading and writing records, multiplying matrices, etc., we could hardly find a any! Yet, so much was said and done on that topic in academic circles. It appears that we faced the same problem with MPI, where despite significant documentation, we could not find even a simple example which supports course-grain parallelism involving only a few processes. From the foregoing, it appears that a new direction may be required for more productive research during the extension period (10/19/98 - 10

  10. Rural Energy Conference Project

    SciTech Connect

    Dennis Witmer; Shannon Watson

    2008-12-31

    Alaska remains, even at the beginning of the 21st century, a place with many widely scattered, small, remote communities, well beyond the end of both the road system and the power grid. These communities have the highest energy costs of any place in the United States, despite the best efforts of the utilities that service them. This is due to the widespread dependence on diesel electric generators, which require small capital investments, but recent increases in crude oil prices have resulted in dramatic increases in the cost of power. In the enabling legislation for the Arctic Energy Office in 2001, specific inclusion was made for the study of ways of reducing the cost of electrical power in these remote communities. As part of this mandate, the University of Alaska has, in conjunction with the US Department of Energy, the Denali Commission and the Alaska Energy Authority, organized a series of rural energy conferences, held approximately every 18 months. The goal of these meeting was to bring together rural utility operators, rural community leaders, government agency representatives, equipment suppliers, and researchers from universities and national laboratories to discuss the current state of the art in rural power generation, to discuss current projects, including successes as well as near successes. Many of the conference presenters were from industry and not accustomed to writing technical papers, so the typical method of organizing a conference by requesting abstracts and publishing proceedings was not considered viable. Instead, the organizing committee solicited presentations from appropriate individuals, and requested that (if they were comfortable with computers) prepare Power point presentations that were collected and posted on the web. This has become a repository of many presentations, and may be the best single source of information about current projects in the state of Alaska.

  11. Aerospace Environmental Technology Conference

    NASA Technical Reports Server (NTRS)

    Whitaker, A. F. (Editor)

    1995-01-01

    The mandated elimination of CFC's, Halons, TCA, and other ozone depleting chemicals and specific hazardous materials has required changes and new developments in aerospace materials and processes. The aerospace industry has been involved for several years in providing product substitutions, redesigning entire production processes, and developing new materials that minimize or eliminate damage to the environment. These activities emphasize replacement cleaning solvents and their application verifications, compliant coatings including corrosion protection systems, and removal techniques, chemical propulsion effects on the environment, and the initiation of modifications to relevant processing and manufacturing specifications and standards. The Executive Summary of this Conference is published as NASA CP-3297.

  12. Networks Technology Conference

    NASA Technical Reports Server (NTRS)

    Tasaki, Keiji K. (Editor)

    1993-01-01

    The papers included in these proceedings represent the most interesting and current topics being pursued by personnel at GSFC's Networks Division and supporting contractors involved in Space, Ground, and Deep Space Network (DSN) technical work. Although 29 papers are represented in the proceedings, only 12 were presented at the conference because of space and time limitations. The proceedings are organized according to five principal technical areas of interest to the Networks Division: Project Management; Network Operations; Network Control, Scheduling, and Monitoring; Modeling and Simulation; and Telecommunications Engineering.

  13. SVC 2003 Technical Conference Summary

    SciTech Connect

    Martin, Peter M.

    2003-07-01

    The 46th Annual Technical Conference of the Society of Vacuum Coaters was held in San Francisco May 2-8. All the world events apparently did not affect the attendance or the spirit of the attendees. The Conference was a huge success and very well attended. Many feel that it was the best Techcon yet. This year's Conference really raised the bar for the 47th Annual Technical Conference in Dallas next year. Congratulations go out to the program committee, board of directors, education committee, scholarship committee and Management Plus for a job well done. Excellent accommodations were provided by the San Francisco Marriott.

  14. Control Center Technology Conference Proceedings

    NASA Technical Reports Server (NTRS)

    1991-01-01

    Conference papers and presentations are compiled and cover evolving architectures and technologies applicable to flight control centers. Advances by NASA Centers and the aerospace industry are presented.

  15. Current Trends in English Language Testing. Conference Proceedings for CTELT 1997 and 1998, Vol. 1.

    ERIC Educational Resources Information Center

    Coombe, Christine A., Ed.

    Papers from the 1997 and 1998 Current Trends in English Language Testing (CTELT) conferences include: "Computer-Based Language Testing: The Call of the Internet" (G. Fulcher); "Uses of the PET (Preliminary English Test) at Sultan Qaboos University" (R. Taylor); "Issues in Foreign and Second Language Academic Listening Assessment" (C. Coombe, J.…

  16. 75 FR 7480 - Fourth Meeting of the Advisory Committee for the 2012 World Radiocommunication Conference...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-02-19

    ...In accordance with the Federal Advisory Committee Act, as amended, this notice advises interested persons that the fourth meeting of the WRC-12 Advisory Committee will be held at the Federal Communications Commission. The purpose of the meeting is to continue preparations for the 2012 World Radiocommunication Conference. The WRC- 12 Advisory Committee will consider any preliminary views and......

  17. Compiled Proceedings: Helping Indochinese Families in Transition Conference (May 11-12, 1981).

    ERIC Educational Resources Information Center

    Meredith, William H., Ed.; Tweten, Bette J., Ed.

    This compilation presents the proceedings of a conference on Indochinese refugee families. The papers included in the volume are the following: (1) "Counseling Vietnamese Women in Transition," by Tran Nhu Choung; (2) "Preliminary Nutritional and Demographic Assessment of Hmong Refugees in the Area of Puget Sound, Washington," by Marshall Hurlich;…

  18. 48 CFR 6101.11 - Conferences; conference memorandum [Rule 11].

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... agreements disposing of matters in dispute; or (6) Ways to expedite disposition of the case or to facilitate settlement of the dispute, including, if the parties and the Board agree, the use of alternative dispute... APPEALS, GENERAL SERVICES ADMINISTRATION CONTRACT DISPUTE CASES 6101.11 Conferences; conference...

  19. 48 CFR 6101.11 - Conferences; conference memorandum [Rule 11].

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... agreements disposing of matters in dispute; or (6) Ways to expedite disposition of the case or to facilitate settlement of the dispute, including, if the parties and the Board agree, the use of alternative dispute... APPEALS, GENERAL SERVICES ADMINISTRATION CONTRACT DISPUTE CASES 6101.11 Conferences; conference...

  20. Conference reviews R&D budget

    NASA Astrophysics Data System (ADS)

    Richman, Barbara T.

    About 85 university officials, laboratory directors, industrial research executives, scientists, and engineers gathered in Washington, D.C., at the invitation of National Academy of Sciences President Frank Press, to discuss the outlook for and the implications of the federal research and development budget for fiscal 1982 and beyond. The consensus of the group is that President Reagan's proposed 12% across-the-board cut, if effected, would severely damage science; that the White House should review research funding to make more productive use of research dollars; that science and technology are vital to the Reagan administration's goals; and that basic research should take priority over development.George A. Keyworth, director of the Office of Science and Technology Policy (OSTP), and Fred Khedouri, associate director for natural resources, energy, and science in the Office of Management and Budget (OMB), also attended the meeting on October 26 and 27. They advised the group to be realistic and not assume the worst case. In addition they told the conference that during this period of fiscal restraint growth will be restricted; nevertheless, science will be treated with sensitivity.

  1. (Tribology conferences and forums)

    SciTech Connect

    Yust, C.S.

    1990-11-30

    The principal meeting attended during this trip was the Japan International Tribology Conference Nagoya 1990. The conference encompassed a wide range of topics, including the tribology of ceramics, the tribology in high-performance automobiles, and many aspects of lubrication technology. Associated forums were also held on the tribology of advanced ceramics, on solid lubrication, and on automotive lubricants. Presentations made during the latter forum discussed anticipated trends in engine development and anticipated improvements in lubricants required for the next generation of engines. In addition to meetings, site visits were made to five industrial organizations to discuss ceramic tribology. Nippon Steel Corporation and Toshiba Corporation are both very active in the ceramic area, Nippon Steel from their interest in research on new materials and Toshiba from both an interest in new materials and in support of their work in electronic devices. Two engine manufacturers were also visited, Toyota Motor Corporation, and Nissan Motor Co., Ltd. These companies were somewhat reserved in their discussion of progress in the utilization of ceramics in automobile engines.

  2. History of NAMES Conferences

    NASA Astrophysics Data System (ADS)

    Filippov, Lev

    2013-03-01

    -Russian International Centre was demonstrated. By the high standards of the reports presented, as well as by its overall organization, the second Seminar met the standards of an international conference. Reviews of state-of-the-art developments in materials science were given by leading scientists from Moscow and from the Lorraine region. The three days of the seminar were structured into four main themes: Functional Materials Coatings, Films and Surface Engineering Nanomaterials and Nanotechnologies The Environment and three Round Table discussions: Defining practical means of carrying out Franco-Russian collaborations in technology transfer and innovation Materials science ARCUS: Lorraine-Russian collaboration in materials science and the environment 32 oral and 25 poster presentations within four sections were given by a total of 110 participants. NAMES 2007, the 3rd Franco-Russian Seminar on New Achievements in Materials and Environmental Sciences, took place in Metz, France on 7-9 November 2007. The conference highlights fundamentals and development of the five main themes connected to the Lorraine-Russia ARCUS project with possible extension to other topics. The five main subjects included in the ARCUS project are: Bulk-surface-interface material sciences Nanomaterials and nanotechnologies Environment and natural resources Plasma physics—ITER project Vibrational dynamics The first, second and third NAMES conferences were financially supported by the following organizations: Ambassade de France à Moscou Communauté Urbaine du Grand Nancy Région Lorraine Conseil Général de Meurthe et Moselle Institut National Polytechnique de Lorraine Université de Metz Université Henry Poincaré CNRS ANVAR Federal Agency on Science and Innovations of the Ministry of Education and Science of the Russian Federation Moscow Committee on Science and Technologies Moscow Institute of Steel and Alloys (Technological University) The 4th conference is supported by the Ministry of Foreign Affairs of

  3. History of NAMES Conferences

    NASA Astrophysics Data System (ADS)

    Filippov, Lev

    2013-03-01

    -Russian International Centre was demonstrated. By the high standards of the reports presented, as well as by its overall organization, the second Seminar met the standards of an international conference. Reviews of state-of-the-art developments in materials science were given by leading scientists from Moscow and from the Lorraine region. The three days of the seminar were structured into four main themes: Functional Materials Coatings, Films and Surface Engineering Nanomaterials and Nanotechnologies The Environment and three Round Table discussions: Defining practical means of carrying out Franco-Russian collaborations in technology transfer and innovation Materials science ARCUS: Lorraine-Russian collaboration in materials science and the environment 32 oral and 25 poster presentations within four sections were given by a total of 110 participants. NAMES 2007, the 3rd Franco-Russian Seminar on New Achievements in Materials and Environmental Sciences, took place in Metz, France on 7-9 November 2007. The conference highlights fundamentals and development of the five main themes connected to the Lorraine-Russia ARCUS project with possible extension to other topics. The five main subjects included in the ARCUS project are: Bulk-surface-interface material sciences Nanomaterials and nanotechnologies Environment and natural resources Plasma physics—ITER project Vibrational dynamics The first, second and third NAMES conferences were financially supported by the following organizations: Ambassade de France à Moscou Communauté Urbaine du Grand Nancy Région Lorraine Conseil Général de Meurthe et Moselle Institut National Polytechnique de Lorraine Université de Metz Université Henry Poincaré CNRS ANVAR Federal Agency on Science and Innovations of the Ministry of Education and Science of the Russian Federation Moscow Committee on Science and Technologies Moscow Institute of Steel and Alloys (Technological University) The 4th conference is supported by the Ministry of Foreign Affairs of

  4. Calendar of Conferences

    NASA Astrophysics Data System (ADS)

    1996-08-01

    8 - 18 August 1996 International Summer School on Plasma Physics and Technology La Jolla, CA, USA Contact: Mr V Stefan, Institute for Advanced Physics Studies, PO Box 2964, La Jolla, CA 92038, USA. Tel +1-619-456-5737. 26 - 30 August 1996 Joint Varenna - Lausanne International Workshop on Theory of Fusion Plasmas Villa Monastero, Varenna, Italy Contact: Centro di Cultura Villa Monastero, 1 Piazza Venini, 22050 Varenna (Lecco), Italy. Tel +39-341-831261, Fax +39-341-831281. Application and abstract deadline: 15 June 1996. 2 - 5 September 1996 EU - US Workshop on Transport in Fusion Plasmas Villa Monastero, Varenna, Italy Further information: G Gorini, ISPP, 16 Via Celoria, I-20133 Milano, Italy. Tel +39-2-2392637, Fax +39-2-2392205, E-mail ggorini@mi.infn.it. Administrative contact: Centro di Cultura Villa Monastero, 1 Piazza Venini, 22050 Varenna (Lecco), Italy. Tel +39-341-831261, Fax +39-341-831281. Application and abstract deadline: 15 June 1996. 9 - 13 September 1996 International Conference on Plasma Physics Nagoya, Japan Contact: Conference Secretariat, c/o Prof. Hiromu Momota, National Institute for Fusion Science, Nagoya 464-01, Japan. Tel +81-52-789-4260, Fax +81-52-789-1037, E-mail icpp96@nifs.ac.jp. Abstract deadline: 31 March 1996. 16 - 20 September 1996 19th Symposium on Fusion Technology Lisbon, Portugal Contact: Professor Carlos Varandas, Centro de Fusão Nuclear, 1096 Lisboa Codex, Portugal. Fax +351-1-8417819, E-mail cvarandas@cfn.ist.utl.pt. General information will be available via WWW with URL http://www.cfn.ist.utl.pt. 25 - 29 September 1996 Summer University of Plasma Physics Garching, Germany Contact: Ms Ch Stahlberg, Max-Planck-Institut für PlasmaPhysik, Boltzmannstr 2, D-85748 Garching, Germany. Tel +49-89-3299-2232, Fax +49-89-3299-1001. 11 - 15 November 1996 38th Annual Meeting of the Division of Plasma Physics, APS Denver, CO, USA Contact: Dr Richard Hazeltine, University of Texas

  5. Got life? Hours of boredom followed by moments of sheer terror (and that's just with the press)

    NASA Astrophysics Data System (ADS)

    Rummel, J. D.; Race, M. S.

    2006-12-01

    It may be hoped that an initial discovery of extraterrestrial life and its disclosure will be done by accident. An event of that kind would have its own dynamic, and while communications about the discovery might be strained at times, there would be less likelihood that lines of inquiry and discourse would have already been taken by the participants and the press. In an ideal world (or worlds), the discovery would come ready-made with a picture or pictures that would be useful as an immediate verification of its reality. But such is not the way of the real world (or worlds, apparently). Lessons learned from the publication of the ALH84001 results in Science magazine are indicative of what may be a more likely scenario. Nonetheless, even that publication was held in confidence for much of the time leading up to NASA's press conference, and the science team doing the work was accordingly insulated from press inquiry while the work was underway. Envisioning a Mars sample return mission, or other, similar sort of endeavor that may involve a dedicated team of scientists—working under continual public scrutiny—it is clear that the circumstances that surround any fundamental discovery about life in the sample would be quite different. Planning for a communications strategy to support the operations of a Mars sample receiving facility (or facilities) must take those circumstances into account. An optimization of the time spent communicating the results of the facility's work should acknowledge the time and effort required, and make provisions for the work to proceed without extensive interruptions—and without being influenced by the expectations of the press or the public. This paper will discuss some of the initial planning associated with the communications strategy surrounding such a facility.

  6. The Role of Information in the Realization of the Human Rights of Migrant Workers. Report of International Conference (Tampere, Finland, June 19-22, 1983). Publications Series B.

    ERIC Educational Resources Information Center

    Hujanen, Taisto, Ed.

    The speeches and papers presented in this conference report are concerned with the information needs of migrant workers and immigrants and the current provision of this information in the press, radio, television, and educational systems of host countries. National reports on the situation of migrant workers in 14 countries are presented,…

  7. 22 CFR 9b.3 - Press correspondents employed by foreign media organizations.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Press correspondents employed by foreign media... OF STATE PRESS BUILDING PASSES § 9b.3 Press correspondents employed by foreign media organizations... media organizations must: (a) Present to the Office of Press Relations, Department of State,...

  8. 22 CFR 9b.3 - Press correspondents employed by foreign media organizations.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Press correspondents employed by foreign media... OF STATE PRESS BUILDING PASSES § 9b.3 Press correspondents employed by foreign media organizations... media organizations must: (a) Present to the Office of Press Relations, Department of State,...

  9. 22 CFR 9b.3 - Press correspondents employed by foreign media organizations.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Press correspondents employed by foreign media... OF STATE PRESS BUILDING PASSES § 9b.3 Press correspondents employed by foreign media organizations... media organizations must: (a) Present to the Office of Press Relations, Department of State,...

  10. 22 CFR 9b.3 - Press correspondents employed by foreign media organizations.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Press correspondents employed by foreign media... OF STATE PRESS BUILDING PASSES § 9b.3 Press correspondents employed by foreign media organizations... media organizations must: (a) Present to the Office of Press Relations, Department of State,...

  11. 22 CFR 9b.3 - Press correspondents employed by foreign media organizations.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Press correspondents employed by foreign media... OF STATE PRESS BUILDING PASSES § 9b.3 Press correspondents employed by foreign media organizations... media organizations must: (a) Present to the Office of Press Relations, Department of State,...

  12. An Update of Freedom of the Press and Information in Latin America and the Caribbean.

    ERIC Educational Resources Information Center

    Garrison, Bruce; Munoz, Julio E.

    This paper is based on a review of the literature that included reports from the Inter-American Press Association's general assembly in Los Angeles in October 1984, the mid-year meeting of the Inter-American Press Association in Panama City in March 1985, and the 1983 world press freedom review of the International Press Institute. Other material…

  13. The Writing Conference as Performance.

    ERIC Educational Resources Information Center

    Newkirk, Thomas

    1995-01-01

    Provides an overview of the conversational roles taken on by students and teachers during college-level writing conferences. Uses the performative theory of Erving Goffman to analyze these role patterns. Illuminates the specific performative demands presented by writing conferences on both students and teachers. (HB)

  14. SLA at 100: Conference Preview

    ERIC Educational Resources Information Center

    Blumenstein, Lynn

    2009-01-01

    When School Library Association (SLA) convenes its annual conference in Washington, DC, June 14-17, 2009, the association will be celebrating its 100th birthday. This occasion allows for grand gestures--the SLA Salutes! Awards and Leadership Reception will be held in the Library of Congress's Great Hall. The conference also draws upon Washington…

  15. Conference Connections: Rewiring the Circuit

    ERIC Educational Resources Information Center

    Siemens, George; Tittenberger, Peter; Anderson, Terry

    2008-01-01

    Increased openness, two-way dialogue, and blurred distinctions between experts and amateurs have combined with numerous technology tools for dialogue, personal expression, networking, and community formation to "remake" conferences, influencing not only how attendees participate in but also how organizers host conferences today. (Contains 31…

  16. Sixth National Conference on Citizenship.

    ERIC Educational Resources Information Center

    Department of Justice, Washington, DC.

    The document presents proceedings from the sixth in a series of annual national citizenship conferences. Held in Washington, D.C. in 1951, the conference served as a forum where educational, political, business, religious, labor, civic, and communications leaders could explore functions and duties of American citizenship. The theme of the…

  17. 10 CFR 2.329 - Prehearing conference.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... place for a conference or conferences before trial. A prehearing conference in a proceeding involving a... proceeding; (10) The setting of a hearing schedule, including any appropriate limitations on the scope...

  18. 10 CFR 2.329 - Prehearing conference.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... place for a conference or conferences before trial. A prehearing conference in a proceeding involving a... proceeding; (10) The setting of a hearing schedule, including any appropriate limitations on the scope...

  19. 77 FR 38306 - GFIRST Conference Stakeholder Evaluation

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-27

    ... SECURITY GFIRST Conference Stakeholder Evaluation AGENCY: National Protection and Programs Directorate, DHS... concerning new Information Collection Request--GFIRST Conference Stakeholder Evaluation. DHS previously... Conference Stakeholder Evaluation Forms. There is no reference to the I-9 Form on the GFIRST...

  20. 38 CFR 39.33 - Conferences.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... STATES FOR ESTABLISHMENT, EXPANSION, AND IMPROVEMENT, OR OPERATION AND MAINTENANCE, OF VETERANS CEMETERIES Establishment, Expansion, and Improvement Projects Grant Requirements and Procedures § 39.33 Conferences. (a) Predesign conference. A predesign conference is required for all Establishment,...

  1. 38 CFR 39.33 - Conferences.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... THE ESTABLISHMENT, EXPANSION, AND IMPROVEMENT, OR OPERATION AND MAINTENANCE, OF VETERANS CEMETERIES Establishment, Expansion, and Improvement Projects Grant Requirements and Procedures § 39.33 Conferences. (a) Predesign conference. A predesign conference is required for all Establishment, Expansion, and...

  2. 38 CFR 39.33 - Conferences.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... THE ESTABLISHMENT, EXPANSION, AND IMPROVEMENT, OR OPERATION AND MAINTENANCE, OF VETERANS CEMETERIES Establishment, Expansion, and Improvement Projects Grant Requirements and Procedures § 39.33 Conferences. (a) Predesign conference. A predesign conference is required for all Establishment, Expansion, and...

  3. 38 CFR 39.33 - Conferences.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... THE ESTABLISHMENT, EXPANSION, AND IMPROVEMENT, OR OPERATION AND MAINTENANCE, OF VETERANS CEMETERIES Establishment, Expansion, and Improvement Projects Grant Requirements and Procedures § 39.33 Conferences. (a) Predesign conference. A predesign conference is required for all Establishment, Expansion, and...

  4. Bilberry and bilberry press cake as sources of dietary fibre

    PubMed Central

    Aura, Anna-Marja; Holopainen-Mantila, Ulla; Sibakov, Juhani; Kössö, Tuija; Mokkila, Mirja; Kaisa, Poutanen

    2015-01-01

    Background Dietary recommendations for Nordic countries urge the use of plant foods as a basis for healthy nutrition. Currently, the level of dietary fibre (DF) intake is not adequate. Berries are an elementary part of the recommended Nordic healthy diet and could be consumed in higher amounts. Materials and methods Finnish bilberries and a bilberry press cake from juice processing were studied for DF content, carbohydrate composition, and non-carbohydrate fibre content, which was analysed as sulphuric acid insoluble and soluble material. The microstructure of all samples was also studied using light microscopy and toluidine blue O, calcofluor, and acid fuchsin staining. Results The total DF contents of fresh and freeze-dried bilberries and the press cake were 3.0, 24.1, and 58.9%, respectively. Most of the DF was insoluble. Only about half of it was carbohydrate, the rest being mostly sulphuric acid–insoluble material, waxy cutin from skins, and resilient seeds. Bilberry seeds represented over half of the press cake fraction, and in addition to skin, they were the major DF sources. Microscopy revealed that skins in the press cake were intact and the surface of the seeds had thick-walled cells. Conclusions Bilberry press cake is thus a good source of insoluble non-carbohydrate DF, and could be used to provide DF-rich foods to contribute to versatile intake of DF. PMID:26652738

  5. A Study on the Specifications of Cold Pressed Colza Oil.

    PubMed

    Yazdani-Nasab, Zahra; Piravi-Vanak, Zahra

    2015-01-01

    Cold pressed oil extraction is the preferred method for seeds with high contents of oil, such as colza. Generally speaking, expeller pressing is less complex, more cost efficient and safer than solvent extraction. Moreover, cold pressed oils retain their natural properties better. Cold pressed colza oil has been found to have numerous health benefits. This was an original and unique study conducted as part of the research for the international Codex standard for cold pressed fats and oils, and aims to examine the chemical properties of two varieties of Iranian colza seed, Hyola and Okapi. The studied factors included (a) chemical properties, and (b) physicochemical and quality characteristics. Based on our findings, both varieties of colza seeds in this study had satisfactory levels of oleic and linoleic acid, and no trans-fatty acids. Although both samples had good nutritional properties, the Hyola variety was higher in oleic acid, indicating better oxidative stability. Due to the considerable amounts of β-sitosterol in both varieties, they may be effective in reducing cholesterol and preventing cancer.

  6. Quality parameters for cold pressed edible argan oils.

    PubMed

    Matthäus, Bertrand

    2013-01-01

    Argan oil belongs to the high-price vegetable oils on the market. Therefore, consumers have the right to purchase a high-quality product. The quality of edible vegetable oils is defined in food standards in which sensory quality is the most important feature. Additional parameters are defined to assess the identity of oils or to evaluate their oxidative state. The sensory quality of cold pressed argan oil is altered if the production has not been performed with reasonable care regarding raw material and extraction. Only oil from roasted seeds extracted by a screw-press had a sufficient sensory quality over a period of 20 weeks without unacceptable sensory attributes. Under accelerated storage conditions oil from roasted seeds extracted by a screw-press remained below the limits given by the Codex Alimentarius or the German guideline for Edible Fats and Oils for peroxide and totox value. Oil from unroasted seeds or oil from goat-digested roasted seeds and extracted by a screw-press, as well as oil from roasted seeds traditionally extracted, exceeded these limits. Initial oxidative stability of oil from unroasted seeds was significantly lower than that of the other oils. After 35 days under accelerated storage, oil from roasted seeds obtained using a screw-press showed the highest oxidative stability. Moreover, tocopherol and phytosterol compositions are useful features of argan oil.

  7. Megagauss X: a conference milestone /

    SciTech Connect

    Fowler, C. M.

    2004-01-01

    The first Megagauss Conference now known as MG I, was held in 1965. Thirty-nine years later, we are now attending MG X. As topical conferences go, this is a fairly long time. For comparison, the first IEEE International Pulsed Power Conference was held in 1976. It seems appropriate in the opening address of this 'Milestone' conference to note some highlights of the earlier MG conferences. Some relatively new research lines in progress will also be noted, as well as the speaker's 'wish list' of projects he would like to see pursued. Mention will be made of the growing number of explosive flux compression facilities around the world, as well as some facilities that no longer exist, but that made significant contributions in their time.

  8. Aerospace Environmental Technology Conference

    SciTech Connect

    Whitaker, A.F.

    1995-03-01

    The mandated elimination of CFC`s, Halons, TCA, and other ozone depleting chemicals and specific hazardous materials has required changes and new developments in aerospace materials and processes. The aerospace industry has been involved for several years in providing product substitutions, redesigning entire production processes, and developing new materials that minimize or eliminate damage to the environment. These activities emphasize replacement cleaning solvents and their application verifications, compliant coatings including corrosion protection systems, and removal techniques, chemical propulsion effects on the environment, and the initiation of modifications to relevant processing and manufacturing specifications and standards. The Executive Summary of this Conference is published as NASA CP-3297. Separate abstracts have been prepared for some articles from this report.

  9. 2006 environmental controls conference

    SciTech Connect

    2006-07-01

    The two topics covered at the conference were: selective catalytic reduction (SCR) and selection non-catalytic reduction (SNCR) for NOx control, and techniques for managing sulfur trioxide. A total of 45 presentations are summarized on the NETL website of which 22 are available in full. These include keynote addresses for each of the two major topics. In addition four poster papers are listed. The papers are arranged in sections headed: regulatory considerations; overview of SCR/SNCR; managing SCR catalysts; gas monitoring and analysis; predictive performance tools; non-coal applications; layered SCR; flow distribution and modeling; hybrid systems; innovative applications; SO{sub 2} conversion to SO{sub 3}; SO{sub 3} overview; acid gas control issues; sorbent injection for acid gas migration; and effects of SO{sub 3} on mercury control.

  10. Personalized cancer care conference.

    PubMed

    Zänker, Kurt S; Mihich, Enrico; Huber, Hans-Peter; Borresen-Dale, Anne-Lise

    2013-01-01

    The Oslo University Hospital (Norway), the K.G. Jebsen Centre for Breast Cancer Research (Norway), The Radiumhospital Foundation (Norway) and the Fritz-Bender-Foundation (Germany) designed under the conference chairmen (E. Mihich, K.S. Zänker, A.L. Borresen-Dale) and advisory committee (A. Borg, Z. Szallasi, O. Kallioniemi, H.P. Huber) a program at the cutting edge of "PERSONALIZED CANCER CARE: Risk prediction, early diagnosis, progression and therapy resistance." The conference was held in Oslo from September 7 to 9, 2012 and the science-based presentations concerned six scientific areas: (1) Genetic profiling of patients, prediction of risk, late side effects; (2) Molecular profiling of tumors and metastases; (3) Tumor-host microenvironment interaction and metabolism; (4) Targeted therapy; (5) Translation and (6) Informed consent, ethical challenges and communication. Two satellite workshops on (i) Ion Ampliseq-a novel tool for large scale mutation detection; and (ii) Multiplex RNA ISH and tissue homogenate assays for cancer biomarker validation were additionally organized. The report concludes that individual risk prediction in carcinogenesis and/or metastatogenesis based on polygenic profiling may be useful for intervention strategies for health care and therapy planning in the future. To detect distinct and overlapping DNA sequence alterations in tumor samples and adjacent normal tissues, including point mutations, small insertions or deletions, copy number changes and chromosomal rearrangements will eventually make it possible to design personalized management plans for individualized patients. However, large individualized datasets need a new approach in bio-information technology to reduce this enormous data dimensionally to simply working hypotheses about health and disease for each individual. PMID:25562519

  11. Personalized Cancer Care Conference

    PubMed Central

    Zänker, Kurt S.; Mihich, Enrico; Huber, Hans-Peter; Borresen-Dale, Anne-Lise

    2013-01-01

    The Oslo University Hospital (Norway), the K.G. Jebsen Centre for Breast Cancer Research (Norway), The Radiumhospital Foundation (Norway) and the Fritz-Bender-Foundation (Germany) designed under the conference chairmen (E. Mihich, K.S. Zänker, A.L. Borresen-Dale) and advisory committee (A. Borg, Z. Szallasi, O. Kallioniemi, H.P. Huber) a program at the cutting edge of “PERSONALIZED CANCER CARE: Risk prediction, early diagnosis, progression and therapy resistance.” The conference was held in Oslo from September 7 to 9, 2012 and the science-based presentations concerned six scientific areas: (1) Genetic profiling of patients, prediction of risk, late side effects; (2) Molecular profiling of tumors and metastases; (3) Tumor-host microenvironment interaction and metabolism; (4) Targeted therapy; (5) Translation and (6) Informed consent, ethical challenges and communication. Two satellite workshops on (i) Ion Ampliseq—a novel tool for large scale mutation detection; and (ii) Multiplex RNA ISH and tissue homogenate assays for cancer biomarker validation were additionally organized. The report concludes that individual risk prediction in carcinogenesis and/or metastatogenesis based on polygenic profiling may be useful for intervention strategies for health care and therapy planning in the future. To detect distinct and overlapping DNA sequence alterations in tumor samples and adjacent normal tissues, including point mutations, small insertions or deletions, copy number changes and chromosomal rearrangements will eventually make it possible to design personalized management plans for individualized patients. However, large individualized datasets need a new approach in bio-information technology to reduce this enormous data dimensionally to simply working hypotheses about health and disease for each individual. PMID:25562519

  12. Corrosion/96 conference papers

    SciTech Connect

    1996-07-01

    Topics covered by this conference include: cathodic protection in natural waters; cleaning and repassivation of building HVAC systems; worldwide opportunities in flue gas desulfurization; advancements in materials technology for use in oil and gas service; fossil fuel combustion and conversion; technology of corrosion inhibitors; computers in corrosion control--modeling and information processing; recent experiences and advances of austenitic alloys; managing corrosion with plastics; corrosion measurement technology; corrosion inhibitors for concrete; refining industry; advances in corrosion control for rail and tank trailer equipment; CO{sub 2} corrosion--mechanisms and control; microbiologically influenced corrosion; corrosion in nuclear systems; role of corrosion in boiler failures; effects of water reuse on monitoring and control technology in cooling water applications; methods and mechanisms of scale and deposit control; corrosion detection in petroleum production lines; underground corrosion control; environmental cracking--relating laboratory results and field behavior; corrosion control in reinforced concrete structures; corrosion and its control in aerospace and military hardware; injection and process addition facilities; progress reports on the results of reinspection of deaerators inspected or repaired per RP0590 criteria; near 100% volume solids coating technology and application methods; materials performance in high temperature environments containing halides; impact of toxicity studies on use of corrosion/scale inhibitors; mineral scale deposit control in oilfield related operations; corrosion in gas treating; marine corrosion; cold climate corrosion; corrosion in the pulp and paper industry; gaseous chlorine alternatives in cooling water systems; practical applications of ozone in recirculating cooling water systems; and water reuse in industry. Over 400 papers from this conference have been processed separately for inclusion on the data base.

  13. 29 CFR 6.53 - Prehearing conference.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... FEDERALLY ASSISTED CONSTRUCTION CONTRACTS AND FEDERAL SERVICE CONTRACTS Substantial Variance and Arm's Length Proceedings § 6.53 Prehearing conference. (a) At the prehearing conference the Administrative...

  14. Solutions to Challenges Facing a University Digital Library and Press

    PubMed Central

    D'Alessandro, Michael P.; Galvin, Jeffrey R.; Colbert, Stephana I.; D'Alessandro, Donna M.; Choi, Teresa A.; Aker, Brian D.; Carlson, William S.; Pelzer, Gay D.

    2000-01-01

    During the creation of a university digital library and press intended to serve as a medical reference and education tool for health care providers and their patients, six distinct and complex digital publishing challenges were encountered. Over nine years, through a multidisciplinary approach, solutions were devised to the challenges of digital content ownership, management, mirroring, translation, interactions with users, and archiving. The result is a unique, author-owned, internationally mirrored, university digital library and press that serves as an authoritative medical reference and education tool for users around the world. The purpose of this paper is to share the valuable digital publishing lessons learned and outline the challenges facing university digital libraries and presses. PMID:10833161

  15. Solutions to challenges facing a university digital library and press.

    PubMed

    D'Alessandro, M P; Galvin, J R; Colbert, S I; D'Alessandro, D M; Choi, T A; Aker, B D; Carlson, W S; Pelzer, G D

    2000-01-01

    During the creation of a university digital library and press intended to serve as a medical reference and education tool for health care providers and their patients, six distinct and complex digital publishing challenges were encountered. Over nine years, through a multidisciplinary approach, solutions were devised to the challenges of digital content ownership, management, mirroring, translation, interactions with users, and archiving. The result is a unique, author-owned, internationally mirrored, university digital library and press that serves as an authoritative medical reference and education tool for users around the world. The purpose of this paper is to share the valuable digital publishing lessons learned and outline the challenges facing university digital libraries and presses.

  16. Natural Hazards and the press in the western Mediterranean region

    NASA Astrophysics Data System (ADS)

    Llasat-Botija, M.; Llasat, M. C.; López, L.

    2007-07-01

    This study analyses press articles published between 1982 and 2005 in an attempt to describe the social perception of natural hazards in Catalonia. The articles included in the database have been classified according to different types of risk. In addition, the study examines the evolution of each type of risk in the press coverage during the study period. Finally, the results have been compared to data provided by insurance companies with respect to compensations paid out for damages. Conclusions show that floods are the most important natural hazard in the region, but that the number of headlines for each event is greater in the case of snowfalls and forest fires. Factors such as the season of the year, the proximity of the affected region to the capital, the topical issues at the time, and the presence of other important news must be considered when the impact in the press is analysed.

  17. Using equal-channel angular pressing for refining grain size

    NASA Astrophysics Data System (ADS)

    Langdon, Terence G.; Furukawa, Minoru; Nemoto, Minoru; Horita, Zenji

    2000-04-01

    Equal-channel angular pressing is an effective tool for attaining ultrafine grain sizes in bulk materials. An important advantage of this technique over conventional metalworking processes, such as extrusion and rolling, is that very high strains may be attained without any concomitant change in the cross-sectional dimensions of the sample. The microstructures introduced by equalchannel angular pressing critically depend on a number of experimental factors, including the nature of the slip systems introduced during the pressing operation and the total strain imposed on the sample. These factors are illustrated by reference to experiments conducted on pure aluminum; results are also included to demonstrate the influence of alloying additions and especially the remarkably small grain sizes that may be achieved in materials having low rates of recovery.

  18. Processing zirconia by sintering/hot isostatic pressing

    SciTech Connect

    Druschitz, A.P. )

    1988-05-01

    Sintering followed by hot isostatic pressing is a potential method for improving the mechanical properties of ceramic materials. Encouraging data have been presented and published but these data do not clearly show the origin of the benefits. Here, the effects of green density, time, temperature, and pressure on sintered density, grain size, and pore size of slip-cast ZrO{sub 2}-3 mol% Y{sub 2}O{sub 3} are described. The data demonstrate that, when compared to pressureless sintering, the sintering/hot isostatic pressing process produces an equivalent maximum density at reduced temperature and significant reductions in pore size, but no reduction in minimum grain size. The maximum density obtainable by the sinter/hot isostatic pressing process was limited by both open porosity and large pores; the processing conditions required to produce the maximum process advantage are described.

  19. Method for hot pressing irregularly shaped refractory articles

    DOEpatents

    Steinkamp, William E.; Ballard, Ambrose H.

    1982-01-01

    The present invention is directed to a method for hot pressing irregularly haped refractory articles with these articles of varying thickness being provided with high uniform density and dimensional accuracy. Two partially pressed compacts of the refractory material are placed in a die cavity between displaceable die punches having compact-contacting surfaces of the desired article configuration. A floating, rotatable block is disposed between the compacts. The displacement of the die punches towards one another causes the block to rotate about an axis normal to the direction of movement of the die punches to uniformly distribute the pressure loading upon the compacts for maintaining substantially equal volume displacement of the powder material during the hot pressing operation.

  20. Joining of ceramics of different biofunction by hot isostatic pressing

    SciTech Connect

    Li, Jianguo . Center for Dental Technology and Biomaterials); Harmansson, L. ); Soeremark, R. . Dept. of Prosthodontics)

    1993-10-01

    Monolithic zirconia (Z) and zirconia-hydroxyapatite (Z/HA) composites were joined by cold isostatic pressing (CIP at 300 MPa) and subsequently by glass-encapsulated hot isostatic pressing (HIP at 1225 C, 1 h and 200 MPa). The physical and mechanical properties of the materials were measured. The fracture surface was studied using a light microscope. The results indicate a strength level of the joint similar to that of the corresponding composite material (Z/HA), 845 and 860 MPa, respectively. Similar experiments with monolithic alumina (A) and alumina-hydroxyapatite (A/HA) were carried out without success. Cracking occurred in the joint area during the cold isostatic pressing process. It seems that ceramics with high green strength and similar green density are essential when joining ceramics by combined CIP and HIP processes.

  1. Crack toughness evaluation of hot pressed and forged beryllium

    NASA Technical Reports Server (NTRS)

    Jones, M. H.; Bubsey, R. T.; Brown, W. F., Jr.

    1971-01-01

    Beryllium fracture toughness test specimens were fatigue cracked using reversed cycling with a compression load two to three times the tension load. In worked beryllium, textures may be produced which result in fatigue cracks that are out of plane with the starter notch. Specimens of hot pressed stock exhibited load displacement records which were nonlinear throughout their course. Fracture specimens of both hot pressed and forged stock showed essentially no reduction of thickness and the fracture surfaces were flat and normal to the load axis. However, the stress intensity factor at maximum load increased with decreasing thickness. Load-displacement and electric potential records for the hot pressed beryllium specimens exhibited several anomalies such as negative residual crack mouth displacements and a decrease in electrical potential with increasing load.

  2. Thermal conductance of pressed contacts at liquid helium temperatures

    NASA Technical Reports Server (NTRS)

    Salerno, L. J.; Kittel, P.; Spivak, A. L.

    1983-01-01

    It is pointed out that the optimum design of cryogenic instruments requires accurate thermal models. The present models are limited by a lack of knowledge of the low temperature thermal conductance of the bolted joints which are typically used in the instrument-to-system interface. In connection with studies of pressed contacts, it has been found that the thermal conductance does not obey the Wiedemann-Franz law. The present investigation is concerned with the characterization of the thermal conductance of pressed contacts at liquid helium-4 temperatures, taking into account the dependence of thermal contact conductance on applied force and temperature. It is shown that for the 0.4 micron OFHC copper pressed contact pair, the thermal conductance varies roughly as the second power of the temperature, and increases with increasing applied force.

  3. Transporting H.320 video conference traffic to the Internet

    NASA Astrophysics Data System (ADS)

    Ku, Chin-Fu; Ko, Hung-Yu; Lin, Jeng-Wei; Pan, Yu-Chun; Ho, Jan-Ming; Chen, Meng-Chang; Ko, Ming-Tat; Chen, James S. J.

    1998-12-01

    Although H.320 is one of the most popular ITU-T standard for video conference systems, H.323 is receiving wide acceptance in the Internet society. In this paper, we study the problem of transporting video conference traffic to and from the Internet. Some characteristics of the problem are as follows. For example, H.323 video stream is VBR while H.320 video stream is CBR; H.323 is byte-oriented while H.320 is bit- oriented; audio and video packets are transmitted independently in H.323 while they are multiplexed together in H.320; the probability of packet loss in an H.323 network is much higher than in an H.320 ISDN circuit switching network. In this paper, we present our designs and some preliminary experimental results in dealing with these issues.

  4. Preliminary Report on Coining of Targets

    SciTech Connect

    Davis, P; Wall, M; Hodge, N; Schwartz, A

    2004-07-27

    We were tasked with developing a coining technique that would evaluate the feasibility of using a pressing, or coining process to imprint a one-dimensional sinusoidal pattern onto a thin disk specimen. We performed finite element method simulations of the coining process, designed, built, and tested a coining apparatus and tested surrogate materials, and coined a sample of special nuclear material. The preliminary results were encouraging. The pressing of a 3-mm diameter by {approx}100 {micro}m thick disc to 500 pounds of pressure produced a flat part with a 1-{micro}m deep by 50-{micro}m period sine wave pattern covering all of the surface and thus demonstrated the method for replicating ultraprecision, mesoscale features onto a near-net-shape metallic blank. This coining technique is being developed to provide specialty processing for the manufacturing of difficult to machine, millimeter-size components made from materials that present hazardous conditions. The technology is versatile and can be used to imprint a wide range of features, or profiles into two opposing surfaces. The coining process requires a simple, conceivably hand held tool, which efficiently produces ultra-precision work pieces without the production of byproducts such as machining chips, or grinding swarf. It shows promise for use on ductile materials that cannot be precision machined with conventional single crystal diamond tooling. As a production process, it can be used to reduce manufacturing costs where large numbers of ultra-precision, repetitive designs are required.

  5. Press chamber coating as external lubrication for high speed rotary presses: lubricant spray rate optimization.

    PubMed

    Jahn, T; Steffens, K-J

    2005-12-01

    Lubrication of the tooling (punches and dies) is necessary to produce tablets. The most commonly used lubricant is magnesium stearate. Adding and blending magnesium stearate to the tablet mass often has negative effects on the properties of the compressed tablets (e.g., decreasing the tensile strength of the tablet). To avoid these negative effects, external lubrication systems were developed. This study investigated the functionality and the influence of a new press chamber coating system called the PKB II. The major difference between the PKB II and previous systems is its ability to spray a mixture of powdered magnesium stearate and air directly onto the punches and dies which was determined to allow the running of the rotor at higher speeds. The data showed a clear correlation between the spray rate of the lubricant and the concentration of the magnesium stearate per tablet. The PKB II was designed to allow for adjustments, in order to optimize the spray rate, by using the ejection force. The concentration of magnesium stearate was reduced to approximately 0.04% per tablet, using the PKB II. Additionally, the most common negative effects, such as the decrease in tablet tensile strength, were avoided by using this system.

  6. Process design of press hardening with gradient material property influence

    SciTech Connect

    Neugebauer, R.; Schieck, F.; Rautenstrauch, A.

    2011-05-04

    Press hardening is currently used in the production of automotive structures that require very high strength and controlled deformation during crash tests. Press hardening can achieve significant reductions of sheet thickness at constant strength and is therefore a promising technology for the production of lightweight and energy-efficient automobiles. The manganese-boron steel 22MnB5 have been implemented in sheet press hardening owing to their excellent hot formability, high hardenability, and good temperability even at low cooling rates. However, press-hardened components have shown poor ductility and cracking at relatively small strains. A possible solution to this problem is a selective increase of steel sheet ductility by press hardening process design in areas where the component is required to deform plastically during crash tests. To this end, process designers require information about microstructure and mechanical properties as a function of the wide spectrum of cooling rates and sequences and austenitizing treatment conditions that can be encountered in production environments. In the present work, a Continuous Cooling Transformation (CCT) diagram with corresponding material properties of sheet steel 22MnB5 was determined for a wide spectrum of cooling rates. Heating and cooling programs were conducted in a quenching dilatometer. Motivated by the importance of residual elasticity in crash test performance, this property was measured using a micro-bending test and the results were integrated into the CCT diagrams to complement the hardness testing results. This information is essential for the process design of press hardening of sheet components with gradient material properties.

  7. Accuracy of press reports on gamma-ray astronomy

    NASA Astrophysics Data System (ADS)

    Schaefer, Bradley E.; Nemiroff, Robert J.; Hurley, Kevin

    2000-09-01

    Most Americans learn about modern science from press reports, while such articles have a bad reputation among scientists. We have performed a study of 148 news articles on gamma-ray astronomy to quantitatively answer the questions ``How accurate are press reports of gamma-ray astronomy?'' and ``What fraction of the basic claims in the press are correct?'' We have taken all articles on the topic from five news sources (UPI, New York Times, Sky & Telescope, Science News, and five middle-sized city newspapers) for one decade (1987-1996) We found an average rate of roughly one trivial error every two articles, while none of our 148 articles significantly mislead the reader or misrepresented the science. This quantitative result is in stark contrast to the nearly universal opinion among scientists that the press frequently butchers science stories. So a major result from our study is that reporters should be rehabilitated into the good graces of astrophysicists, since they actually are doing a good job. For our second question, we rated each story with the probability that its basic new science claim is correct. We found that the average probability over all stories is 70%. Since the reporters and the scientists are both doing good jobs, then why is 30% of the science you read in the press wrong? The reason is that the nature of news reporting is to present front-line science and the nature of front-line science is that reliable conclusions have not yet been reached. The combination of these two natures forces fast breaking science news to have frequent incorrect ideas that are subsequently identified and corrected. So a second major result from our study is to make the distinction between textbook science (with reliabilities near 100%) and front-line science which you read about in the press (with reliabilities near 70%). .

  8. 25. Paper ready for the calender presses. This picture shows ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    25. Paper ready for the calender presses. This picture shows the paper after it has been coated and dried, as shown on page 238, and it being rolled at the end of the coating-machine. It is now ready to be sent to the big presses which calender it (or iron it, as popular pariance would have it). The pictures on pages 238 and 239 show a continuous process over a single machine; but on account of the length of teh machine, the process is illustrated in sections. (p.239.) - Champion-International Paper Company, West bank of Spicket River at Canal Street, Lawrence, Essex County, MA

  9. Canning Of Powdered Metal For Hot Isostatic Pressing

    NASA Technical Reports Server (NTRS)

    Juhas, John J.

    1989-01-01

    Quality of specimen enhanced by improved canning process. Method developed for canning specimens for hot isostatic pressing. Specimen placed inside refractory-metal ring, then sandwiched between two refractory-metal face sheets. Assembly placed inside die, then positioned in vacuum hot press. Heated to set temperature at prescribed vacuum to burn off all of binder in specimen. Advantages: powder-metallurgy composite totally purged of binder sealed in can in single operation, maintains size, shape, and uniformity of specimen. Weld region does not recrystallize, and little possibility of cracking.

  10. Hot Isostatic Pressing (HIP): Techniques, applications and economical use

    NASA Astrophysics Data System (ADS)

    Bousack, H.

    1985-01-01

    Hot isostatic pressing (HIP) is used to regenerate defect components exposed to dynamic and permanent static loads causing pore formation. It consists in compacting and bonding of powders and solids by encapsulation. The HIP-equipment consists of a high pressure vessel, an oven and a rare gas system for production of isostatic pressure. The compacting procedure using diffusion and deformation processes depends on the pressing temperature. It is used in the production of hard metals, superalloys, fiber composites and ceramic components. It saves energy material and costs.

  11. Properties of Hot Pressed Titanium Alloy Powders for Cryogenic Applications.

    NASA Technical Reports Server (NTRS)

    Friedman, G. I.; Kazaroff, J. M.

    1970-01-01

    Evaluation of strength and toughness of hot-pressed titanium alloy powders at room and at cryogenic temperatures. The purpose was to determine how the mechanical properties of solid bodies formed from powder would compare with wrought specimens of the same size and with the same chemical analysis. It was found that of five titanium powder-making processes investigated, only the Rotating Electrode Process (REP) was capable of producing ELI-grade titanium alloy powder. Blocks hot-pressed from spherical REP powders had tensile properties equivalent to or better than those obtained from wrought bar.

  12. Fabrication and Preliminary Evaluation of Metal Matrix Microencapsulated Fuels

    SciTech Connect

    Terrani, Kurt A; Kiggans, Jim; Snead, Lance Lewis

    2012-01-01

    The metal matrix microencapsulated (M3) fuel concept for light water reactors (LWRs), consisting of coated fuel particles dispersed in a zirconium metal matrix, is introduced. Fabrication of M3 fuels by hot pressing, hot isostatic pressing, or extrusion methodologies has been demonstrated over the temperature range 800-1050 C. Various types of coated fuel particles with outermost layers of pyrocarbon, SiC, ZrC, and TiN have been incorporated into the zirconium metal matrix. Mechanical particle-particle and chemical particle-matrix interactions have been observed during the preliminary characterization of as-fabricated M3 specimens. Irradiation of three M3 rodlets with surrogate coated fuel particles was carried out at mean rod temperature of 400 C to 4.6 dpa in the zirconium metal matrix. Due to absence of texture in the metal matrix no irradiation growth strain (<0.09%) was detected during the post-irradiation examination.

  13. 33rd Actinide Separations Conference

    SciTech Connect

    McDonald, L M; Wilk, P A

    2009-05-04

    Welcome to the 33rd Actinide Separations Conference hosted this year by the Lawrence Livermore National Laboratory. This annual conference is centered on the idea of networking and communication with scientists from throughout the United States, Britain, France and Japan who have expertise in nuclear material processing. This conference forum provides an excellent opportunity for bringing together experts in the fields of chemistry, nuclear and chemical engineering, and actinide processing to present and discuss experiences, research results, testing and application of actinide separation processes. The exchange of information that will take place between you, and other subject matter experts from around the nation and across the international boundaries, is a critical tool to assist in solving both national and international problems associated with the processing of nuclear materials used for both defense and energy purposes, as well as for the safe disposition of excess nuclear material. Granlibakken is a dedicated conference facility and training campus that is set up to provide the venue that supports communication between scientists and engineers attending the 33rd Actinide Separations Conference. We believe that you will find that Granlibakken and the Lake Tahoe views provide an atmosphere that is stimulating for fruitful discussions between participants from both government and private industry. We thank the Lawrence Livermore National Laboratory and the United States Department of Energy for their support of this conference. We especially thank you, the participants and subject matter experts, for your involvement in the 33rd Actinide Separations Conference.

  14. PREFACE: The Irago Conference 2012

    NASA Astrophysics Data System (ADS)

    Sandhu, Adarsh; Okada, Hiroshi

    2013-04-01

    The Irago Conference 2012 - 360 degree outlook on critical scientific and technological challenges for a sustainable society Organized by the Electronics-Inspired Interdisciplinary Research Institute (EIIRIS) at Toyohashi University of Technology, the Irago Conference, held recently (15-16 November) in Aichi, Japan, aimed to enhance mutual understanding between scientists, engineers and policymakers. Over 180 participants tackled topics ranging from energy and natural resources to public health and disaster prevention. The 360-degree outlook of the conference impressed speakers and guests. ''This conference has been extremely informative,'' noted Robert Gellar from the University of Tokyo. ''A unique conference with experts from a range of backgrounds,'' agreed Uracha Ruktanonchai from the National Nanotechnology Center (NANOTEC) in Thailand. Similarly, G P Li, professor of electrical engineering and computer science at the University of California Irvine commented that he had been ''able to think the unthinkable'' as a range of topics came together. The conference was streamed live on Ustream to ensure that researchers from across the world could benefit from thought-provoking presentations examining global issues such as energy, disaster mitigation and nanotechnology. ''This was wonderful,'' said Oussama Khatib from Stanford University, ''A good recipe of speakers from such a range of backgrounds.'' Manuscripts submitted to the organizers were peer-reviewed, and the papers in this proceedings were accepted for Journal of Physics: Conference Series. In addition to the formal speaker programme, graduate-student sessions provided a platform for graduate students to describe their latest findings as oral presentations. A series of excursions to relevant locations, such as the Tahara megasolar region under construction and a local car-manufacturing factory, gave participants the opportunity to further consider practical applications of their research in industry

  15. Mechanics of Textile Composites Conference

    SciTech Connect

    Poe, C.C. Jr.; Harris, C.E.

    1995-10-01

    This document is a compilation of papers presented at the Mechanics of Textile Composites Conference in Hampton, Virginia, December 6-8, 1994. This conference was the culmination of a 3-year program that was initiated by NASA late in 1990 to develop mechanics of textile composites in support of the NASA Advanced Composites Technology Program (ACT). The goal of the program was to develop mathematical models of textile preform materials and test methods to facilitate structural analysis and design. Participants in the program were from NASA, academia, and industry. Separate abstracts have been submitted to the database for articles from this conference.

  16. DOE Workshop at Tapia Conference

    SciTech Connect

    Taylor, Valerie

    2015-02-19

    The DE-SC0013568 DOE Grant, in the amount of $11,822.79, was used to support five doctoral students from underrepresented groups to attend the 2015 Richard Tapia Celebration of Diversity in Computing Conference, held February 18-21 in Boston, MA. Each scholarship was approximately $1200 to cover conference registration, travel, and lodging for the duration of the conference. The remaining $5,822.79 was used to support a DOE Breakfast Workshop during breakfast on Thursday, February 19. The Breakfast supported approximately 140 graduate students from underrepresented groups to learn about the different career opportunities at the different DOE National Laboratories.

  17. Topical conference: Opportunities in biology for physicists. Conference summary

    SciTech Connect

    2002-12-16

    The conference was aimed at early career physicists who were interested in exploring the possibilities of working at the interface between physics and biology, in particular, graduate students and postdocs considering applying the methods of physics to biological research. Areas of major importance were genomics and evolution, biological networks, biomolecular dynamics, high-resolution imaging of living cells, and technologies for biological investigation. A total of 205 persons attended the conference.

  18. PREFACE: Quark Matter 2006 Conference

    NASA Astrophysics Data System (ADS)

    Ma, Yu-Gang; Wang, En-Ke; Cai, Xu; Huang, Huan-Zhong; Wang, Xin-Nian; Zhu, Zhi-Yuan

    2007-07-01

    The Quark Matter 2006 conference was held on 14 20 November 2006 at the Shanghai Science Hall of the Shanghai Association of Sciences and Technology in Shanghai, China. It was the 19th International Conference on Ultra-Relativistic Nucleus Nucleus Collisions. The conference was organized jointly by SINAP (Shanghai Institute of Applied Physics, Chinese Academy of Sciences (CAS)) and CCNU (Central China Normal University, Wuhan). Over 600 scientists from 32 countries in five continents attended the conference. This is the first time that China has hosted such a premier conference in the field of relativistic heavy-ion collisions, an important event for the Chinese high energy nuclear physics community. About one half of the conference participants are junior scientists—a clear indication of the vigor and momentum for this field, in search of the fundamental nature of the nuclear matter at extreme conditions. Professor T D Lee, honorary chair of the conference and one of the founders of the quark matter research, delivered an opening address with his profound and philosophical remarks on the recent discovery of the nature of strongly-interacting quark-gluon-plasma (sQGP). Professor Hongjie Xu, director of SINAP, gave a welcome address to all participants on behalf of the two hosting institutions. Dr Peiwen Ji, deputy director of the Mathematics and Physics Division of the Natural Science Foundation of China (NSFC), also addressed the conference participants and congratulated them on the opening of the conference. Professor Mianheng Jiang, vice president of the Chinese Academy of Sciences (CAS), gave a concise introduction about the CAS as the premier research institution in China. He highlighted continued efforts at CAS to foster international collaborations between China and other nations. The Quark Matter 2006 conference is an example of such a successful collaboration between high energy nuclear physicists in China and other nations all over the world. The

  19. PREFACE: Quark Matter 2006 Conference

    NASA Astrophysics Data System (ADS)

    Ma, Yu-Gang; Wang, En-Ke; Cai, Xu; Huang, Huan-Zhong; Wang, Xin-Nian; Zhu, Zhi-Yuan

    2007-07-01

    The Quark Matter 2006 conference was held on 14 20 November 2006 at the Shanghai Science Hall of the Shanghai Association of Sciences and Technology in Shanghai, China. It was the 19th International Conference on Ultra-Relativistic Nucleus Nucleus Collisions. The conference was organized jointly by SINAP (Shanghai Institute of Applied Physics, Chinese Academy of Sciences (CAS)) and CCNU (Central China Normal University, Wuhan). Over 600 scientists from 32 countries in five continents attended the conference. This is the first time that China has hosted such a premier conference in the field of relativistic heavy-ion collisions, an important event for the Chinese high energy nuclear physics community. About one half of the conference participants are junior scientists—a clear indication of the vigor and momentum for this field, in search of the fundamental nature of the nuclear matter at extreme conditions. Professor T D Lee, honorary chair of the conference and one of the founders of the quark matter research, delivered an opening address with his profound and philosophical remarks on the recent discovery of the nature of strongly-interacting quark-gluon-plasma (sQGP). Professor Hongjie Xu, director of SINAP, gave a welcome address to all participants on behalf of the two hosting institutions. Dr Peiwen Ji, deputy director of the Mathematics and Physics Division of the Natural Science Foundation of China (NSFC), also addressed the conference participants and congratulated them on the opening of the conference. Professor Mianheng Jiang, vice president of the Chinese Academy of Sciences (CAS), gave a concise introduction about the CAS as the premier research institution in China. He highlighted continued efforts at CAS to foster international collaborations between China and other nations. The Quark Matter 2006 conference is an example of such a successful collaboration between high energy nuclear physicists in China and other nations all over the world. The

  20. Proceedings: Condenser technology conference

    SciTech Connect

    Tsou, J.L. ); Mussalli, Y.G. )

    1991-08-01

    Seam surface condenser and associated systems performance strongly affects availability and heat rate in nuclear and fossil power plants. Thirty-six papers presented at a 1990 conference discuss research results, industry experience, and case histories of condenser problems and solutions. This report contains papers on life extension, performance improvement, corrosion and failure analysis, fouling prevention, and recommendation for future R D. The information represents recent work on condenser problems and solutions to improve the procurement, operation, and maintenance functions of power plant personnel. Several key points follow: A nuclear and a fossil power plant report show that replacing titanium tube bundles improves condenser availability and performance. One paper reports 10 years of experience with enhanced heat transfer tubes in utility condensers. The newly developed enhanced condenser tubes could further improve condensing heat transfer. A new resistance summation method improves the accuracy of condenser performance prediction, especially for stainless steel and titanium tubed condensers. Several papers describe improved condenser fouling monitoring techniques, including a review of zebra mussel issues.

  1. Conference OKs science budgets

    NASA Astrophysics Data System (ADS)

    With the budget process all but complete for next fiscal year, the National Science Foundation and the National Aeronautics and Space Administration observers were saying that science had not done that badly in Congress, for an election year. NSF got half the budget increase it requested, NASA two-thirds. The Space Station did well, at the expense of environmental and social programs, which are funded by Congress from the same pot of money as NASA and NSF.A House-Senate conference finished work on a $59 billion appropriations bill for the Department of Housing and Urban Development and independent agencies, including EPA, NASA, and NSF, in early August. The House and Senate then quickly passed the measure before their recess; the President is expected to sign it soon. Included in the Fiscal Year 1989 spending bill are $1,885 billion for NSF, a 9.8% increase over FY 1988, and $10.7 billion for NASA, 18.5% more than the year before.

  2. Oceans '86 conference record

    SciTech Connect

    Not Available

    1986-01-01

    These five volumes represent the proceedings of the Oceans '86 Conference Washington, DC, 23-25 September 1986. Volume 1 includes papers on Underwater Photography and Sensing; Marine Recreation; Diving; CTACTS (Charleston Tactical Aircrew Combat Training System); Offshore and Coastal Structures; Underwater Welding, Burning and Cutting; Advances in Ocean Mapping; Ocean Energy; Biofouling and Corrosion; Moorings, Cables and Connections; Marine Minerals; Remote Sensing and Satellites; and Acoustics Analysis. Volume 2 covers Data Base Management; Modeling and Simulation; Ocean Current Simulation; Instrumentation; Artificial Reefs and Fisheries; US Status and Trends; Education and Technology Transfer; Economic Potential and Coastal Zone Management; and Water Quality. Volume 3 includes papers on National and Regional Monitoring Strategies; New Techniques and Strategies for Monitoring; Indicator Parameters/Organisms; Historical Data; Crystal Cube for Coastal and Estuarine Degradation; and the Monitoring Gap. Volume 4 covers the Organotin Symposium - Chemistry; Toxicity Studies; and Environmental Monitoring and Modeling. Volume 5 includes papers on Advances in Oceanography; Applied Oceanography; Unmanned Vehicles and ROV's; Manned Vehicles; and Oceanographic Ships.

  3. 18. Interior detail, drill press and grinder, Machine Shop, Roundhouse ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    18. Interior detail, drill press and grinder, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to east (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

  4. 19. Interior detail, grinder and drill press, Machine Shop, Roundhouse ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. Interior detail, grinder and drill press, Machine Shop, Roundhouse Machine Shop Extension, Southern Pacific Railroad Carlin Shops, view to south (135mm lens). - Southern Pacific Railroad, Carlin Shops, Roundhouse Machine Shop Extension, Foot of Sixth Street, Carlin, Elko County, NV

  5. DETAIL VIEW OF FILTER PRESS REMAINS, BOILER, SECONDARY ORE BIN, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL VIEW OF FILTER PRESS REMAINS, BOILER, SECONDARY ORE BIN, TRAM TRESTLE AND WATER TANK, LOOKING NORTHWEST. HIS VIEW IS TAKEN FROM THE THIRD LEVEL OF THE MILL, NEARBY THE BLACKSMITH'S FORGE. - Keane Wonder Mine, Park Route 4 (Daylight Pass Cutoff), Death Valley Junction, Inyo County, CA

  6. The Press and California Higher Education. A Report.

    ERIC Educational Resources Information Center

    Chance, William

    This study examined the media coverage of California higher education in the popular press in four of the state's major dailies. In particular the study examined the roles that the San Francisco Chronicle, the Sacramento Bee, the Los Angeles Times, and the San Jose Mercury News play in fostering the public debate about higher education. All the…

  7. Toward a Normative Theory of Freedom of the Press.

    ERIC Educational Resources Information Center

    Jensen, Dwight Wm.

    In considering the possibility of a normative theory of freedom of the press, this paper examines arguments about such freedom in the Third World and elsewhere. Some of the arguments discussed in the paper are derived from the theories of John Locke and Karl Marx; others are drawn from the concepts of divine rights, elitism, liberal democracy, and…

  8. Student Press and Distribution Issues: Rights and Responsibilities.

    ERIC Educational Resources Information Center

    Bartlett, Larry D.

    1984-01-01

    This review analyzes case law in the area of student press and distribution and offers some guidelines for developing and implementing school policy and rules. Litigation is reviewed in order to clarify students' rights, limitations on administrative authority in matters of censorship and prior restraint, and actions in connection with writing and…

  9. The Press in Black Africa: Philosophy and Control.

    ERIC Educational Resources Information Center

    Wilcox, Dennis Lee

    This dissertation is a descriptive, comparative study of press-government relationships in the 34 nations of independent Black Africa south of the Sahara. Excluded from consideration are territories under European administration and those nations that have white minority governments. The 34 sovereign states are analyzed and systematically…

  10. Argonne Director Eric Isaacs addresses the National Press Club

    ScienceCinema

    Eric Isaccs

    2016-07-12

    Argonne Director Eric Isaacs addresses the National Press Club on 9/15/2009. To build a national economy based on sustainable energy, the nation must first "reignite its innovation ecology," he said. Issacs makes the case for investing in science to secure America's future.

  11. A Community College District/University Press Copublishing Venture.

    ERIC Educational Resources Information Center

    Caraway, Georgia Kemp

    1994-01-01

    Describes cooperation between the Dallas County Community College District (DCCCD) and University of North Texas Press, resulting in the publication of a collection of short stories and a book of poetry written by DCCCD faculty and staff. Provides information on sales, marketing and promotion, classroom use of the books, and opportunities for…

  12. Book Review: Stars (Copyright 1985, Golden Press; New York)

    NASA Astrophysics Data System (ADS)

    Marigza, R. N., Jr.

    2009-06-01

    Stars is a part of the Golden Guides collection produced by Golden Press. It is a small 160 page paperback guide to the constellations, the sun, the moon, planets, and other celestial bodies. The book is convenient to carry along wherever you go, making it an easy to access reference material.

  13. Reconstructing Suicide: Reporting Suicide in the Israeli Press.

    ERIC Educational Resources Information Center

    Weimann, Gabriel; Fishman, Gideon

    1995-01-01

    Presents a content analysis of suicide stories in the Israeli Press (1955-90) and measures of real suicide events to highlight the selective, distorted, and reconstructed nature of reporting suicide. Argues that such reporting may account for at least some of the contradictory findings of studies on the impact of publicized suicide stories on…

  14. 19. SOUTHEAST TO CIRCA 1900 FOURSPINDLE PRODUCTION DRILL PRESS ALONG ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    19. SOUTHEAST TO CIRCA 1900 FOUR-SPINDLE PRODUCTION DRILL PRESS ALONG EAST INTERIOR WALL OF FACTORY, SHOWING SHELVES AND BINS WITH TOOLS AND PARTS FOR PUMP AND WATER SYSTEM REPAIR. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

  15. 20. NORTHEAST TO CIRCA 1900 FOURSPINDLE PRODUCTION DRILL PRESS ALONG ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. NORTHEAST TO CIRCA 1900 FOUR-SPINDLE PRODUCTION DRILL PRESS ALONG EAST INTERIOR WALL OF FACTORY, SHOWING SHELVES AND BINS WITH TOOLS AND PARTS FOR PUMP AND WATER SYSTEM REPAIR. - Kregel Windmill Company Factory, 1416 Central Avenue, Nebraska City, Otoe County, NE

  16. Ten Ways to Get Attention with Your Press Releases.

    ERIC Educational Resources Information Center

    Van Kooten, Valerie

    1994-01-01

    Recommends 10 steps that can increase chances of having press release published. Advises readers to use required format; determine what constitutes news; keep release short; include contact person in release; incorporate good quotes; send releases to right person; understand that release will be edited; time arrival of release; follow up with…

  17. University Press Meeting Dominated by Donor Proposal and Digital Publishing

    ERIC Educational Resources Information Center

    Howard, Jennifer

    2007-01-01

    A surprise request for proposals from the Andrew W. Mellon Foundation and a forthcoming report on university publishing in the digital age were among topics discussed at the annual meeting of the Association of American University Presses. The offer from the Mellon Foundation concerns support for collaborative, monograph-centered projects in…

  18. Ethics and the Press: Readings in Mass Media Morality.

    ERIC Educational Resources Information Center

    Merrill, John C., Ed.; Barney, Ralph D., Ed.

    This collection of 35 articles addresses the topic of the ethical considerations and implications involved in reporting the news. Included in this book are such articles as: "Ethics and Journalism" by John Merrill, "Quality in Mass Communications" by Wilbur Schramm, "The American Press: Some Truths About Truths" by Edward Jay Epstein, "The New…

  19. 29 CFR 1910.217 - Mechanical power presses.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... equipment. Air controlling equipment shall be protected against foreign material and water entering the... tools are intended for placing and removing materials in and from the press. Hand feeding tools are not... hazard areas to lubricate material, punches or dies. (e) Inspection, maintenance, and modification...

  20. 29 CFR 1910.217 - Mechanical power presses.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... equipment. Air controlling equipment shall be protected against foreign material and water entering the... tools are intended for placing and removing materials in and from the press. Hand feeding tools are not... hazard areas to lubricate material, punches or dies. (e) Inspection, maintenance, and modification...

  1. Institutional Stress: Conflicting Normative Models in the Catholic Press.

    ERIC Educational Resources Information Center

    Thorn, William; Garrison, M. Bruce

    To determine whether the diocesan newspapers of the Catholic church are based on an autonomous, adversarial model or on an institutional, public relations model of the press, a survey was conducted of 148 editors and 145 bishops or publishers of such newspapers. Results showed that the editors and bishops agreed on the three major roles of the…

  2. The Press, the Government, and the Ethics Vacuum.

    ERIC Educational Resources Information Center

    Merrill, John C.

    Immanuel Kant's idea of a will to do the right thing--to be ethical--is essentially a dead concept with both press and government. The reasons for this "ethics vacuum" are two-fold: the foundations of ethics in both circles are vague, confusing, and beset by relativism and pragmatism so that no system of ethics ever really coalesces; and neither…

  3. African-American Press Coverage of Clarence Thomas Nomination.

    ERIC Educational Resources Information Center

    Fearn-Banks, Kathleen

    1994-01-01

    Examines pressures facing the African American press by focusing on its coverage of the 1991 nomination of Clarence Thomas to the United States Supreme Court. Discusses the dilemma these newspapers faced in choosing between supporting African Americans and supporting civil rights, with their mixed coverage of the story reflecting this dilemma. (SR)

  4. Democratic Socialism: Toward a Fifth Theory of the Press.

    ERIC Educational Resources Information Center

    Picard, Robert G.

    For more than 25 years, the "four theories" paradigm has been dominant in the study of the relationships among the press, society, and the state. Asserting that the major approaches to such study are the libertarian, social responsibility, authoritarian, and Soviet/communist theories, this paradigm fails to account for economic and social…

  5. 42. PRESSING A SLAB OF CLAY ONTO A MOSAIC MOLD. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    42. PRESSING A SLAB OF CLAY ONTO A MOSAIC MOLD. THE MOLD, WHICH HAS A RAISED DESIGN, LEAVES AND OUTLINE IN THE SLAB, THE PIECES THUS DEFINED, ARE THEN CUT APART TO BE FIRED SEPARATELY AND REASSEMBLED. - Moravian Pottery & Tile Works, Southwest side of State Route 313 (Swamp Road), Northwest of East Court Street, Doylestown, Bucks County, PA

  6. The Mutilated Boy and the Press: A Rumor Study.

    ERIC Educational Resources Information Center

    Brown, Lee

    Responsible editors avoid printing falsehoods, but the public sometimes demands that rumors be covered in the press. One example of such rumors and the way editors deal with them is the "Mutilated Boy." The "Mutilated Boy" rumor has been circulating for decades and involves a brutal attack upon a small boy in a public rest room. The "crime" is…

  7. Googling "Deaf": Deafness in the World's English-Language Press

    ERIC Educational Resources Information Center

    Power, Des

    2007-01-01

    An Internet search tool, Google Alert, was used to survey the global English-language press July-December 2005 for references to deaf people. The survey found that such references focus on people who are deaf rather than the disability itself, thus demonstrating how well deaf people fit into the mainstream. Derogatory terminology such as "deaf and…

  8. Looking north at uing press of the submerged arc weld ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Looking north at u-ing press of the submerged arc weld (saw) line of the main pipe mill building, bay 7. - U.S. Steel National Tube Works, Main Pipe Mill Building, Along Monongahela River, McKeesport, Allegheny County, PA

  9. 9. VIEW OF MOLTEN SALT BATH EQUIPMENT AND ROLLER PRESSES ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. VIEW OF MOLTEN SALT BATH EQUIPMENT AND ROLLER PRESSES BEING INSTALLED ON THE WEST SIDE (SIDE B) OF BUILDING 883. SIDE B OF BUILDING 883 WAS USED TO PROCESS ENRICHED URANIUM FROM 1957-66. (1/23/57) - Rocky Flats Plant, Uranium Rolling & Forming Operations, Southeast section of plant, southeast quadrant of intersection of Central Avenue & Eighth Street, Golden, Jefferson County, CO

  10. Attitudes of High School Principals about Press Freedom after Hazelwood.

    ERIC Educational Resources Information Center

    Dickson, Thomas V.

    1989-01-01

    Surveys high school principals in Missouri to examine how they have responded to their new authority over the student press following the Supreme Court's Hazelwood decision. Reports that while principals say that student newspapers are open forums, most also say that they would censor certain types of material. (MM)

  11. Argonne Director Eric Isaacs addresses the National Press Club

    SciTech Connect

    Eric Isaccs

    2009-09-17

    Argonne Director Eric Isaacs addresses the National Press Club on 9/15/2009. To build a national economy based on sustainable energy, the nation must first "reignite its innovation ecology," he said. Issacs makes the case for investing in science to secure America's future.

  12. Quid Pro Quo: Tobacco Companies and the Black Press

    PubMed Central

    McCandless, Phyra M.; Yerger, Valerie B.

    2012-01-01

    Objectives. We explored the relationship between tobacco companies and the Black press, which plays an important role in conveying information and opinions to Black communities. Methods. In this archival case study, we analyzed data from internal tobacco industry documents and archives of the National Newspaper Publishers Association (NNPA), the trade association of the Black press. Results. In exchange for advertising dollars and other support, the tobacco industry expected and received support from Black newspapers for tobacco industry policy positions. Beginning in the 1990s, resistance from within the Black community and reduced advertising budgets created counterpressures. The tobacco industry, however, continued to sustain NNPA support. Conclusions. The quid pro quo between tobacco companies and the Black press violated journalistic standards and represented an unequal trade. Although numerous factors explain today's tobacco-related health disparities, the Black press's service to tobacco companies is problematic because of the trust that the community placed in such media. Understanding the relationship between the tobacco industry and the NNPA provides insight into strategies that the tobacco industry may use in other communities and countries. PMID:21852652

  13. Reliability Analysis of Traditional and Ballistic Bench Press Exercises at Different Loads

    PubMed Central

    García-Ramos, Amador; Padial, Paulino; García-Ramos, Miguel; Conde-Pipó, Javier; Argüelles-Cienfuegos, Javier; Štirn, Igor; Feriche, Belén

    2015-01-01

    The purpose of this study was to determine test–retest reliability for peak barbell velocity (Vpeak) during the bench press (BP) and bench press throw (BPT) exercises for loads corresponding to 20–70% of one-repetition maximum (1RM). Thirty physically active collegiate men conducted four evaluations after a preliminary BP 1RM determination (1RM·bw-1 = 1.02 ± 0.16 kg·kg-1). In counterbalanced order, participants performed two sessions of the BP in one week and two sessions of the BPT in another week. Recovery time between sessions within the same week was 48 hours and recovery time between sessions of different weeks was 120 hours. On each day of evaluation the individual load-velocity relationship at each tenth percentile (20–70% of 1RM) in a Smith machine for the BP or BPT was determined. Participants performed three attempts per load, but only the best repetition (highest Vpeak), registered by a linear position transducer, was analysed. The BPT resulted in a significantly lower coefficient of variation (CV) for the whole load–velocity relationship, compared to the BP (2.48% vs. 3.22%; p = 0.040). Test–retest intraclass correlation coefficients (ICCs) ranged from r = 0.94–0.85 for the BPT and r = 0.91–0.71 for the BP (p < 0.001). The reduction in the biological within-subject variation in BPT exercise could be promoted by the braking phase that obligatorily occurs during a BP executed with light or moderate loads. Therefore, we recommend the BPT exercise for a most accurate assessment of upper-body velocity. PMID:26557190

  14. 10. international mouse genome conference

    SciTech Connect

    Meisler, M.H.

    1996-12-31

    Ten years after hosting the First International Mammalian Genome Conference in Paris in 1986, Dr. Jean-Louis Guenet presided over the Tenth Conference at the Pasteur Institute, October 7--10, 1996. The 1986 conference was a satellite to the Human Gene Mapping Workshop and had approximately 50 attendees. The 1996 meeting was attended by 300 scientists from around the world. In the interim, the number of mapped loci in the mouse increased from 1,000 to over 20,000. This report contains a listing of the program and its participants, and two articles that review the meeting and the role of the laboratory mouse in the Human Genome project. More than 200 papers were presented at the conference covering the following topics: International mouse chromosome committee meetings; Mutant generation and identification; Physical and genetic maps; New technology and resources; Chromatin structure and gene regulation; Rate and hamster genetic maps; Informatics and databases; and Quantitative trait analysis.

  15. 10 CFR 205.171 - Conferences.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Conferences. 205.171 Section 205.171 Energy DEPARTMENT OF ENERGY OIL ADMINISTRATIVE PROCEDURES AND SANCTIONS Conferences, Hearings, and Public Hearings § 205.171 Conferences. (a) The DOE in its discretion may direct that a conference be convened, on its own initiative...

  16. 9. international mouse genome conference

    SciTech Connect

    1995-12-31

    This conference was held November 12--16, 1995 in Ann Arbor, Michigan. The purpose of this conference was to provide a multidisciplinary forum for exchange of state-of-the-art information on genetic mapping in mice. This report contains abstracts of presentations, focusing on the following areas: mutation identification; comparative mapping; informatics and complex traits; mutagenesis; gene identification and new technology; and genetic and physical mapping.

  17. NASA Microgravity Materials Science Conference

    NASA Technical Reports Server (NTRS)

    Gillies, D. C. (Compiler); McCauley, D. E. (Compiler)

    1999-01-01

    The Microgravity Materials Science Conference was held July 14-16, 1998 at the Von Braun Center in Huntsville, AL. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division at NASA Headquarters, and hosted by the NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications. It was the third NASA conference of this type in the microgravity materials science discipline. The microgravity science program sponsored approximately 125 investigations and 100 principal investigators in FY98, almost all of whom made oral or poster presentations at this conference. The conference's purpose was to inform the materials science community of research opportunities in reduced gravity in preparation for a NASA Research Announcement scheduled for release in late 1998 by the Microgravity Research Division at NASA Headquarters. The conference was aimed at materials science researchers from academia, industry, and government. A tour of the Marshall Space Flight Center microgravity research facilities was held on July 16, 1998. This volume is comprised of the research reports submitted by the principal investigators after the conference.

  18. NASA Microgravity Materials Science Conference

    NASA Technical Reports Server (NTRS)

    Szofran, Frank R. (Compiler); McCauley, D. (Compiler); Walker, C. (Compiler)

    1996-01-01

    The Microgravity Materials Science Conference was held June 10-11, 1996 at the Von Braun Civic Center in Huntsville, AL. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Science and Applications Division at NASA Headquarters, and hosted by the NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the second NASA conference of this type in the microgravity materials science discipline. The microgravity science program sponsored approximately 80 investigations and 69 principal investigators in FY96, all of whom made oral or poster presentations at this conference. The conference's purpose was to inform the materials science community of research opportunities in reduced gravity in preparation for a NASA Research Announcement (NRA) scheduled for release in late 1996 by the Microgravity Science and Applications Division at NASA Headquarters. The conference was aimed at materials science researchers from academia, industry, and government. A tour of the MSFC microgravity research facilities was held on June 12, 1996. This volume is comprised of the research reports submitted by the principal investigators after the conference and presentations made by various NASA microgravity science managers.

  19. Eighteen Years of the Great Lakes Regional Counseling Psychology Conference: Revisiting the Need for Regional Conferences

    ERIC Educational Resources Information Center

    Delgado-Romero, Edward A.; Bowman, Sharon L.; Gerstein, Lawrence H.

    2006-01-01

    The Great Lakes Regional Conference on Counseling Psychology is the only conference to continuously fulfill the 1987 mandate issued by Division 17 for regional counseling conferences. The rationale for regional conferences is reviewed, and the 18-year history of the Great Lakes Regional Conference is examined. The authors conclude by noting the…

  20. PREFACE: XXI Fluid Mechanics Conference

    NASA Astrophysics Data System (ADS)

    Szmyd, Janusz S.; Fornalik-Wajs, Elzbieta; Jaszczur, Marek

    2014-08-01

    This Conference Volume contains the papers presented at the 21st Fluid Mechanics Conference (XXI FMC) held at AGH - University of Science and Technology in Krakow, Poland, 15-18 June 2014, and accepted for Proceedings published in the Journal of Physics: Conference Series. The Fluid Mechanics Conferences have been taking place every two years since 1974, a total of forty years. The 21st Fluid Mechanics Conference (XXI FMC) is being organized under the auspices of the Polish Academy of Sciences, Committee of Mechanics. The goal of this conference is to provide a forum for the exposure and exchange of ideas, methods and results in fluid mechanics. Conference topics include, but are not limited to Aerodynamics, Atmospheric Science, Bio-Fluids, Combustion and Reacting Flows, Computational Fluid Dynamics, Experimental Fluid Mechanics, Flow Machinery, General Fluid Dynamics, Hydromechanics, Heat and Fluid Flow, Measurement Techniques, Micro- and Nano- Flow, Multi-Phase Flow, Non-Newtonian Fluids, Rotating and Stratified Flows, Turbulence. Within the general subjects of this conference, the Professor Janusz W. Elsner Competition for the best fluid mechanics paper presented during the Conference is organized. Authors holding a M.Sc. or a Ph.D. degree and who are not older than 35 years of age may enter the Competition. Authors with a Ph.D. degree must present individual papers; authors with a M.Sc. degree may present papers with their supervisor as coauthor, including original results of experimental, numerical or analytic research. Six state-of-the-art keynote papers were delivered by world leading experts. All contributed papers were peer reviewed. Recommendations were received from the International Scientific Committee, reviewers and the advisory board. Accordingly, of the 163 eligible extended abstracts submitted, after a review process by the International Scientific Committee, 137 papers were selected for presentation at the 21st Fluid Mechanics Conference, 68

  1. The Suburban Press; First Steps toward an Annotated Bibliography. Suburban Press Research Series No. 16 and 17.

    ERIC Educational Resources Information Center

    Northern Illinois Univ., De Kalb. Suburban Press Research Center.

    This bibliography lists journal articles concerning various aspects of the suburban press. Annotated selections, arranged alphabetically according to journal title, are gathered from the following periodicals: "Advertising Age,""Business Week,""Columbia Journalism Review,""Editor and Publisher,""Grassroots Editor,""Journalism…

  2. Preliminary Drill Sites

    DOE Data Explorer

    Lane, Michael

    2013-06-28

    Preliminary locations for intermediate depth temperature gradient holes and/or resource confirmation wells based on compilation of geological, geophysical and geochemical data prior to carrying out the DOE-funded reflection seismic survey.

  3. Improving Dryer and Press Efficiencies Through Combustion of Hydrocarbon Emissions

    SciTech Connect

    Sujit Banerjee

    2005-10-31

    Emission control devices on dryers and presses have been legislated into the industry, and are now an integral part of the drying system. These devices consume large quantities of natural gas and electricity and down-sizing or eliminating them will provide major energy savings. The principal strategy taken here focuses on developing process changes that should minimize (and in some cases eliminate) the need for controls. A second approach is to develop lower-cost control options. It has been shown in laboratory and full-scale work that Hazardous Air Pollutants (HAPs) emerge mainly at the end of the press cycle for particleboard, and, by extension, to other prod-ucts. Hence, only the air associated with this point of the cycle need be captured and treated. A model for estimating terpene emissions in the various zones of veneer dryers has been developed. This should allow the emissions to be concentrated in some zones and minimized in others, so that some of the air could be directly released without controls. Low-cost catalysts have been developed for controlling HAPs from dryers and presses. Catalysts conventionally used for regenerative catalytic oxidizers can be used at much lower temperatures for treating press emissions. Fluidized wood ash is an especially inexpensive mate-rial for efficiently reducing formaldehyde in dryer emissions. A heat transfer model for estimating pinene emissions from hot-pressing strand for the manufacture of flakeboard has been constructed from first principles and validated. The model shows that most of the emissions originate from the 1-mm layer of wood adjoining the platen surface. Hence, a simple control option is to surface a softwood mat with a layer of hardwood prior to pressing. Fines release a disproportionate large quantity of HAPs, and it has been shown both theo-retically and in full-scale work that particles smaller than 400 µm are principally responsible. Georgia-Pacific is considering green

  4. Consensus conference. Electroconvulsive therapy.

    PubMed

    1985-10-18

    mechanism of action, clarify the extent of adverse effects, and determine optimum treatment technique. Despite recent research effort yielding substantial information, permitting professional and public evaluation of the safety and efficacy of ECT, the investigation of ECT has not generally been in the mainstream of mental health research. To help resolve questions surrounding these issues, the National Institutes of Health in conjunction with the National Institute of Mental Health convened a Consensus Development Conference on Electroconvulsive Therapy from June 10 to 12, 1985.(ABSTRACT TRUNCATED AT 400 WORDS) PMID:4046138

  5. After the Highwayman: Syntax and Successful Placement of Press Releases in Newspapers.

    ERIC Educational Resources Information Center

    Walters, Timothy N.; And Others

    1994-01-01

    Compares the grammatical structure of original press releases with the resultant placements in daily newspapers. Finds that, in their use of press releases, journalists almost always have to make them simpler, shorter, easier to read, and less passive. (SR)

  6. ASM Conference on Prokaryotic Development

    SciTech Connect

    Kaplan, H. B.

    2005-07-13

    Support was provided by DOE for the 2nd ASM Conference on Prokaryotic Development. The final conference program and abstracts book is attached. The conference presentations are organized around topics that are central to the current research areas in prokaryotic development. The program starts with topics that involve relatively simple models systems and ends with systems that are more complex. The topics are: i) the cell cycle, ii) the cytoskeleton, iii) morphogenesis, iv) developmental transcription, v) signaling, vi) multicellularity, and vii) developmental diversity and symbiosis. The best-studied prokaryotic development model systems will be highlighted at the conference through research presentations by leaders in the field. Many of these systems are also model systems of relevance to the DOE mission including carbon sequestration (Bradyrizobium, Synechococcus), energy production (Anabaena, Rhodobacter) and bioremediation (Caulobacter, Mesorhizobium). In addition, many of the highlighted organisms have important practical applications; the actinomycetes and myxobacteria produce antimicrobials that are of commercial interest. It is certain that the cutting-edge science presented at the conference will be applicable to the large group of bacteria relevant to the DOE mission.

  7. Social sciences conference on AIDS.

    PubMed

    1997-03-01

    This paper reports on the 1996 South African Universities Social Sciences Conference on AIDS held in Mmambatho, Northwest Province, South Africa. The conference was attended with a strong contingent from Botswana, Lesotho, Malawi, Namibia, South Africa, Swaziland, Zambia, and Zimbabwe. In the conference, various papers explored the needs of, and programmatic responses to women, orphaned children, university students, communities, youth private enterprise, the informal sector, and policy and socioeconomic concerns at a broader level. In addition, several papers specifically discussed the situation of women and AIDS, as well as relevant policy issues. A recommendation was made for governments to coordinate their efforts, with a call for increased openness at all levels rather than facing the epidemic individually. In this respect, the conference noted that the media could play a much more decisive role. This report also highlights the major comments made during the conference and some of the key issues that were raised in each of the following areas: 1) awareness and prevention, 2) children, 3) women, and 4) household costs.

  8. Main roll for an air press of a papermaking machine

    DOEpatents

    Beck, David A.

    2004-03-09

    A roll for use in an air press assembly of a papermaking machine has a pair of ends associated therewith. The roll includes a pair of edge portions with each edge portion extending to one of the pair of ends. Each edge portion has an edge surface portion composed of a first material, the first material having a first hardness. The roll further includes a middle portion located between the pair of edge portions, the middle portion having a middle surface portion composed of a second material. The second material has a second hardness, the second material being harder than the first material. The first material is preferably a soft, seal material which promotes reduced air leakage from the air press assembly.

  9. Quantitative analysis of inclusion distributions in hot pressed silicon carbide

    SciTech Connect

    Michael Paul Bakas

    2012-12-01

    ABSTRACT Depth of penetration measurements in hot pressed SiC have exhibited significant variability that may be influenced by microstructural defects. To obtain a better understanding regarding the role of microstructural defects under highly dynamic conditions; fragments of hot pressed SiC plates subjected to impact tests were examined. Two types of inclusion defects were identified, carbonaceous and an aluminum-iron-oxide phase. A disproportionate number of large inclusions were found on the rubble, indicating that the inclusion defects were a part of the fragmentation process. Distribution functions were plotted to compare the inclusion populations. Fragments from the superior performing sample had an inclusion population consisting of more numerous but smaller inclusions. One possible explanation for this result is that the superior sample withstood a greater stress before failure, causing a greater number of smaller inclusions to participate in fragmentation than in the weaker sample.

  10. Follicular contact dermatitis due to coloured permanent-pressed sheets

    PubMed Central

    Panaccio, François; Montgomery, D. C.; Adam, J. E.

    1973-01-01

    A delayed hypersensitivity type of allergic contact dermatitis was observed following exposure to certain brands of 50% cotton, 50% polyester coloured permanent-pressed sheets produced by a particular manufacturer. The dermatitis presented as an extremely pruritic follicular eczema of the body and vesicular edema of the ears and face. Patch testing excluded formalin as the allergen but suggested permanent-pressing chemicals as a possibility. Several washings of the sheets did not prevent the development of the dermatitis. The removal of sheets did not immediately result in improvement: the condition could persist for up to eight weeks after their discontinuance. ImagesFIG. 1FIG. 2FIG. 3FIG. 4FIG. 5 PMID:4268628

  11. Crack toughness evaluation of hot pressed and forged beryllium.

    NASA Technical Reports Server (NTRS)

    Jones, M. H.; Bubsey, R. T.; Brown, W. F., Jr.

    1973-01-01

    Fracture toughness tests at room temperature were made on three-point loaded beryllium bend specimens cut from hot pressed block and a forged disk. These specimens had plane proportions conforming to ASTM E 399 and covered a thickness range of from 1/32 to 1/2 in. Two sets of bend specimens were tested, one having fatigue cracks and the other 0.5 mil radius notches. One objective of the investigation was the development of techniques to produce fatigue cracks in accordance with the procedures specified in ASTM E 399. This objective was achieved for the hot pressed material. In plane cracks were not consistently produced in the specimens cut from forged stock.

  12. IEEE International conference on plasma science: Conference record--Abstracts

    SciTech Connect

    Not Available

    1993-01-01

    The conference covered the following topics: basic plasma physics; vacuum electronics; gaseous and electrical gas discharges; laser-produced plasma; space plasmas; computational plasma science; plasma diagnostics; electron, ion and plasma sources; intense electron and ion beams; intense beam microwaves; fast wave M/W devices; microwave-plasma interactions; magnetic fusion; MHD; plasma focus; ultrafast z-pinches and x-ray lasers; plasma processing; fast-opening switches; EM and ETH launchers; solid-state plasmas and switches; plasmas for lighting; ball lightning and spherical plasma configurations; and environmental/energy issues. Separate abstracts were prepared for 379 items in this conference.

  13. 2008 Co2 Assimilation in Plants: Genome to Biome Gordon Research Conference - August 17-22

    SciTech Connect

    James V. Maroney

    2009-08-12

    Formerly entitled 'CO2 Fixation and Metabolism in Green Plants', this long-standing Gordon Research Conference has been held on a triennial basis since 1976. In 1990 the participants decided to alternate between sites in the U.S. and outside the U.S. The 2005 conference was held in Europe at the Centre Paul Langevin in Aussois, France, so the 2008 conference returns to a U.S. site - the University of New England in Biddeford, Maine. The 2008 conference covers basic plant research related to photosynthesis and the subsequent regulation and engineering of carbon assimilation. Approaches that range from post-genomic technologies and systems biology, through to fundamental biochemistry, physiology and molecular biology are integrated within ecological and agronomic contexts. As such, the meeting provides the rare opportunity of a single venue for discussing all aspects of the 'carbon-side' of photosynthesis - from genome to biome. The 2008 conference will include an emphasis on the central role of carbon assimilation by plants for developing new sources of bioenergy and for achieving a carbon-neutral planet. A special characteristic of this conference is its 'intimacy' with approximately 110 conferees, ranging from beginning graduate students and postdoctoral associates to leading senior plant scientists, engaged in open and forward-thinking discussions in an informal, friendly setting. With extended time devoted to discussion, and the encouragement to challenge dogma, it is unlike other meetings in the U.S. or abroad. Another novel feature of the conference is a session devoted to the latest 'hot off the press' findings by both established and early career scientists, picked from the abstracts. Together with an expanded poster discussion in the evening sessions, this session provides an opportunity for early career scientists to present interesting new data and to 'test drive' hypotheses in a collegial atmosphere.

  14. Hot Isostatic Press (HIP) vitrification of radwaste concretes

    SciTech Connect

    Siemer, D.D.; Scheetz, B.; Gougar, M.L.D.

    1995-12-01

    Properly formulated and properly ``canned`` radwaste concretes can be readily hot-isostatically-pressed (HIPed) into materials that exhibit performance equivalent to typical radwaste-type glasses. The HIPing conditions (temperature/pressure) required to turn a concrete waste form into a ``vitrified`` waste form are quite mild and therefore consistent with both safety and high productivity. This paper describes the process and its products with reference to its potential application to Idaho Chemical Processing Plant (ICPP) reprocessing wastes.

  15. Mechanical and thermophysical properties of hot-pressed SYNROC B

    SciTech Connect

    Hoenig, C.L.; Newkirk, H.W.; Otto, R.A.; Brady, R.L.; Brown, A.E.; Ulrich, A.R.; Lum, R.C.

    1981-05-06

    The optimal SYNROC compositons for use with commercial waste are reviewed. Large amounts of powder (about 2.5 kg) were prepared by convention al ceramic operations to test the SYNROC concept on a processing scale. Samples, 15.2 cm in diameter, were hot pressed in graphite, and representative samples were cut for microstructural evaluations. Measured mechanical and thermophysical properties did not vary significantly as a function of sample location and were typical of titanate ceramic materials.

  16. Lesbis sustineo! Naiad press authors remember Barbara Grier.

    PubMed

    Cantrell, Jaime

    2014-01-01

    Drawing from semi-structured interviews with some of Naiad Press's most celebrated women, including Katherine V. Forrest, Barbara's supervising editor at Naiad from 1983-1993; Sheila Ortiz Taylor, author of what is considered by many to be the first lesbian novel with a Chicana heroine; and the incomparable Lee Lynch, this work aims to sustain an ongoing remembrance of Grier's life and work by encouraging memory exploration--a symphonic blending of the printed and spoken word. PMID:25298097

  17. Lesbis sustineo! Naiad press authors remember Barbara Grier.

    PubMed

    Cantrell, Jaime

    2014-01-01

    Drawing from semi-structured interviews with some of Naiad Press's most celebrated women, including Katherine V. Forrest, Barbara's supervising editor at Naiad from 1983-1993; Sheila Ortiz Taylor, author of what is considered by many to be the first lesbian novel with a Chicana heroine; and the incomparable Lee Lynch, this work aims to sustain an ongoing remembrance of Grier's life and work by encouraging memory exploration--a symphonic blending of the printed and spoken word.

  18. Support Assembly for Composite Laminate Materials During Roll Press Processing

    NASA Technical Reports Server (NTRS)

    Catella, Luke A.

    2011-01-01

    A composite laminate material is supported during the roll press processing thereof by an assembly having: first and second perforated films disposed adjacent to first and second opposing surfaces of a mixture of uncured resin and fibers defining the composite laminate material, a gas permeable encasement surrounding the mixture and the first and second films, a gas impervious envelope sealed about the gas permeable encasement, and first and second rigid plates clamped about the gas impervious envelope.

  19. PREPARATION OF METAL POWDER COMPACTS PRIOR TO PRESSING

    DOEpatents

    Mansfield, H.

    1958-08-26

    A method of fabricating uranium by a powder metallurgical technique is described. It consists in introducing powdered uranium hydride into a receptacle shaped to coincide with the coatour of the die cavity and heating the hydride so that it decomposes to uranium metal. The metal particles cohere in the shapw of the receptacle and thereafter the prefurmed metal powder is pressed and sintered to obtain a dense compact.

  20. Using SPC for the dry-pressing of beryllia parts

    SciTech Connect

    Sepulveda, J.L.; Jech, D.E.; Ferguson, G. )

    1994-01-01

    Recent advances in the development of high-power electronic devices require the use of materials which are both good electrical insulators and good thermal conductors. Beryllia ceramics exhibit excellent electrical and thermal management performance. Production of beryllia parts requires consistent, ceramic-grade powders and reliable fabrication processes. The extractive process, dry-pressing fabrication process, and the application of statistical process control techniques are reviewed. The important mechanical, thermal, and electrical properties of beryllia are compared to other common ceramic materials.

  1. Proceedings of the International Academy for Information Management Annual Conference (15th, Brisbane, Australia, December 6-10, 2000).

    ERIC Educational Resources Information Center

    International Academy for Information Management.

    This document presents proceedings from the International Academy for Information Management (IAIM) annual conference, held December 6-10, 2000 in Brisbane, Australia. Papers include: "Metacognitive Miscalibration and Underachievement in a Computer Literacy Course: Some Preliminary Observations" (Deborah K. Smith, William Wittman, C. Bryan…

  2. Filter press plugging in zinc plant purification circuits

    NASA Astrophysics Data System (ADS)

    Chen, T. T.; Dutrizac, J. E.

    2003-04-01

    Mineralogical studies were carried out to identify the causes of filter press plugging in two zinc plant purification circuits. In the first circuit, Kraft paper covers were used over the filter cloths. An extensive layer of basic zinc sulfate, Zn4(SO4)(OH)6.xH2O or Zn5(SO4)2)(OH)6.xH2O, precipitated on the surface of the Kraft paper and within the pores of the paper. In the second circuit, woven polypropylene cloth was used in the first-stage filter presses. The cloth was extensively covered by basic zinc sulfate, which also filled the relatively large pores in this type of material. An unwoven polypropylene cloth was used in the second-stage filter presses of this circuit. The significantly finer pores in this type of cloth appeared to be plugged by major amounts of zinc sulfate, ZnSO4.xH2O, that presumably crystallized because of the temperature-concentration conditions prevailing in that part of the circuit.

  3. Gas loading apparatus for the Paris-Edinburgh press

    SciTech Connect

    Bocian, A.; Kamenev, K. V.; Bull, C. L.; Hamidov, H.; Loveday, J. S.; Nelmes, R. J.

    2010-09-15

    We describe the design and operation of an apparatus for loading gases into the sample volume of the Paris-Edinburgh press at room temperature and high pressure. The system can be used for studies of samples loaded as pure or mixed gases as well as for loading gases as pressure-transmitting media in neutron-scattering experiments. The apparatus consists of a high-pressure vessel and an anvil holder with a clamp mechanism. The vessel, designed to operate at gas pressures of up to 150 MPa, is used for applying the load onto the anvils located inside the clamp. This initial load is sufficient for sealing the pressurized gas inside the sample containing gasket. The clamp containing the anvils and the sample is then transferred into the Paris-Edinburgh press by which further load can be applied to the sample. The clamp has apertures for scattered neutron beams and remains in the press for the duration of the experiment. The performance of the gas loading system is illustrated with the results of neutron-diffraction experiments on compressed nitrogen.

  4. Response Induction during the Acquisition and Maintenance of Lever Pressing with Delayed Reinforcement

    ERIC Educational Resources Information Center

    Escobar, Rogelio; Bruner, Carlos A.

    2007-01-01

    The acquisition of lever pressing by rats and the occurrence of unreinforced presses at a location different from that of the reinforced response were studied using different delays of reinforcement. An experimental chamber containing seven identical adjoining levers was used. Only presses on the central (operative) lever produced food pellets.…

  5. 22 CFR 9b.5 - Temporary Department of State press building passes.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Temporary Department of State press building passes. 9b.5 Section 9b.5 Foreign Relations DEPARTMENT OF STATE GENERAL REGULATIONS GOVERNING DEPARTMENT OF STATE PRESS BUILDING PASSES § 9b.5 Temporary Department of State press building passes. A...

  6. 22 CFR 9b.2 - Press correspondents employed by United States media organizations.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... media organizations. 9b.2 Section 9b.2 Foreign Relations DEPARTMENT OF STATE GENERAL REGULATIONS... media organizations. In order to obtain a Department of State press building pass, press correspondents employed by United States media organizations must: (a) Present to the Office of Press...

  7. 22 CFR 9b.2 - Press correspondents employed by United States media organizations.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... media organizations. 9b.2 Section 9b.2 Foreign Relations DEPARTMENT OF STATE GENERAL REGULATIONS... media organizations. In order to obtain a Department of State press building pass, press correspondents employed by United States media organizations must: (a) Present to the Office of Press...

  8. 22 CFR 9b.2 - Press correspondents employed by United States media organizations.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... media organizations. 9b.2 Section 9b.2 Foreign Relations DEPARTMENT OF STATE GENERAL REGULATIONS... media organizations. In order to obtain a Department of State press building pass, press correspondents employed by United States media organizations must: (a) Present to the Office of Press...

  9. 22 CFR 9b.2 - Press correspondents employed by United States media organizations.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... media organizations. 9b.2 Section 9b.2 Foreign Relations DEPARTMENT OF STATE GENERAL REGULATIONS... media organizations. In order to obtain a Department of State press building pass, press correspondents employed by United States media organizations must: (a) Present to the Office of Press...

  10. 22 CFR 9b.2 - Press correspondents employed by United States media organizations.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... media organizations. 9b.2 Section 9b.2 Foreign Relations DEPARTMENT OF STATE GENERAL REGULATIONS... media organizations. In order to obtain a Department of State press building pass, press correspondents employed by United States media organizations must: (a) Present to the Office of Press...

  11. The Hutchins Commission, The Press and the Responsibility Concept. Journalism Monographs No. 49.

    ERIC Educational Resources Information Center

    Blanchard, Margaret A.

    This monograph details several of the factors which brought about the publication, in 1947, of "A Free and Responsible Press," the report of the Hutchins Commission on Freedom of the Press. The commission's report gave the press a face-saving way of responding to the criticism which was leveled at the economic structure of newspaper operations and…

  12. Freedom of the Press in Europe, 1815-1914. Journalism Monographs Number Eighty.

    ERIC Educational Resources Information Center

    Goldstein, Robert J.

    In 19th century Europe, the dominant classes detested the idea of a free press, seeing it as a middle and lower class weapon. Although repression of the press in Europe existed long before the 19th century, at this time techniques of press repression fell into two major categories: (1) direct--licensing, prior censorship, and post-publication…

  13. 40 CFR 180.1291 - Cold pressed neem oil; exemption from the requirement of a tolerance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Cold pressed neem oil; exemption from... FOOD Exemptions From Tolerances § 180.1291 Cold pressed neem oil; exemption from the requirement of a tolerance. Residues of the biochemical pesticide cold pressed neem oil are exempt from the requirement of...

  14. Ideals, Interests and Civil Liberty: The Colonial Press and Freedom, 1735-76

    ERIC Educational Resources Information Center

    Rivera, Clark

    1978-01-01

    An analysis of the colonial American press shows that, although it was not a free press as people now conceive of one, freedom of expression was in general less restricted than in other contemporary cultures, and the press did foster and utilize conceptions of freedom that foreshadowed those of today. (GW)

  15. The Partisan Press in Hong Kong: Between British Colonial Rule and Chinese Politics.

    ERIC Educational Resources Information Center

    Lee, Chin-Chuan

    The aim of this paper is to provide a socio-historical perspective on the continuity and change of the Chinese press in Hong Kong. Divided into four sections, the paper examines (1) the partisan press structure as a microcosm of China's interparty struggle; (2) the rise of the market-oriented centrist press since 1970 as a result of Hong Kong's…

  16. 40 CFR 180.1291 - Cold pressed neem oil; exemption from the requirement of a tolerance.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Cold pressed neem oil; exemption from... FOOD Exemptions From Tolerances § 180.1291 Cold pressed neem oil; exemption from the requirement of a tolerance. Residues of the biochemical pesticide cold pressed neem oil are exempt from the requirement of...

  17. Black Press Commentary on the Japanese Internment during World War II.

    ERIC Educational Resources Information Center

    Jeter, James Phillip

    A study examined contemporary reactions of the Black American press to the relocation and internment of the Japanese and Japanese Americans during World War II. Noting that the Black American press has been an activist press since its inception in 1827, it was hypothesized that Black newspapers would editorialize against the internment of Japanese…

  18. The Egyptian Press: An Historical View of Its Importance in Political Movements.

    ERIC Educational Resources Information Center

    Tyler, John

    This report traces the development of the Egyptian press, from its origin with the arrival of the first printing press in 1789 to the present free press policies of Anwar Sadat. Because political struggle and social reform have accompanied the educational and cultural progress of Egypt, the news publications have traditionally been utilitarian.…

  19. Pronouncements and Denunciations: An Analysis of State Press Association Ethics Codes from the 1920s.

    ERIC Educational Resources Information Center

    Cronin, Mary M.; McPherson, James B.

    1995-01-01

    Discusses how four situational concerns (the rise of press agents, the fallout from World War I propaganda, sensationalism's resurgence, and editorial independence) contributed to a noticeable decline of the public's trust in the press. Shows how, as a result, 12 state press association ethics codes from the 1920s consistently emphasized the…

  20. 25 CFR 307.5 - Hand seal press and certificates to be furnished.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Hand seal press and certificates to be furnished. 307.5... FABRICS; USE OF GOVERNMENT CERTIFICATE OF GENUINENESS § 307.5 Hand seal press and certificates to be... § 307.6 one hand seal press and a supply of blank Government certificates, which shall be used only...

  1. 25 CFR 307.5 - Hand seal press and certificates to be furnished.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 25 Indians 2 2013-04-01 2013-04-01 false Hand seal press and certificates to be furnished. 307.5... FABRICS; USE OF GOVERNMENT CERTIFICATE OF GENUINENESS § 307.5 Hand seal press and certificates to be... § 307.6 one hand seal press and a supply of blank Government certificates, which shall be used only...

  2. 25 CFR 307.5 - Hand seal press and certificates to be furnished.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 25 Indians 2 2011-04-01 2011-04-01 false Hand seal press and certificates to be furnished. 307.5... FABRICS; USE OF GOVERNMENT CERTIFICATE OF GENUINENESS § 307.5 Hand seal press and certificates to be... § 307.6 one hand seal press and a supply of blank Government certificates, which shall be used only...

  3. 25 CFR 307.5 - Hand seal press and certificates to be furnished.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 25 Indians 2 2014-04-01 2014-04-01 false Hand seal press and certificates to be furnished. 307.5... FABRICS; USE OF GOVERNMENT CERTIFICATE OF GENUINENESS § 307.5 Hand seal press and certificates to be... § 307.6 one hand seal press and a supply of blank Government certificates, which shall be used only...

  4. 25 CFR 307.5 - Hand seal press and certificates to be furnished.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 25 Indians 2 2012-04-01 2012-04-01 false Hand seal press and certificates to be furnished. 307.5... FABRICS; USE OF GOVERNMENT CERTIFICATE OF GENUINENESS § 307.5 Hand seal press and certificates to be... § 307.6 one hand seal press and a supply of blank Government certificates, which shall be used only...

  5. 40 CFR 180.1291 - Cold pressed neem oil; exemption from the requirement of a tolerance.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Cold pressed neem oil; exemption from... FOOD Exemptions From Tolerances § 180.1291 Cold pressed neem oil; exemption from the requirement of a tolerance. Residues of the biochemical pesticide cold pressed neem oil are exempt from the requirement of...

  6. 40 CFR 180.1291 - Cold pressed neem oil; exemption from the requirement of a tolerance.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Cold pressed neem oil; exemption from... FOOD Exemptions From Tolerances § 180.1291 Cold pressed neem oil; exemption from the requirement of a tolerance. Residues of the biochemical pesticide cold pressed neem oil are exempt from the requirement of...

  7. 40 CFR 180.1291 - Cold pressed neem oil; exemption from the requirement of a tolerance.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Cold pressed neem oil; exemption from... FOOD Exemptions From Tolerances § 180.1291 Cold pressed neem oil; exemption from the requirement of a tolerance. Residues of the biochemical pesticide cold pressed neem oil are exempt from the requirement of...

  8. 2002 Microgravity Materials Science Conference

    NASA Technical Reports Server (NTRS)

    Gillies, Donald (Editor); Ramachandran, Narayanan (Editor); Murphy, Karen (Editor); McCauley, Dannah (Editor); Bennett, Nancy (Editor)

    2003-01-01

    The 2002 Microgravity Materials Science Conference was held June 25-26, 2002, at the Von Braun Center, Huntsville, Alabama. Organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Physical Sciences Research Division, NASA Headquarters, and hosted by NASA Marshall Space Flight Center and member institutions under the Cooperative Research in Biology and Materials Science (CORBAMS) agreement, the conference provided a forum to review the current research and activities in materials science, discuss the envisioned long-term goals, highlight new crosscutting research areas of particular interest to the Physical Sciences Research Division, and inform the materials science community of research opportunities in reduced gravity. An abstracts book was published and distributed at the conference to the approximately 240 people attending, who represented industry, academia, and other NASA Centers. This CD-ROM proceedings is comprised of the research reports submitted by the Principal Investigators in the Microgravity Materials Science program.

  9. 9th Caribbean Geological Conference

    NASA Astrophysics Data System (ADS)

    Draper, Gren

    The ninth in a series of Caribbean Geological Conferences, which are held every 3 or 4 years, took place in Santo Domingo, capital of the Dominican Republic, from the 15th to 26th of August 1980. The conference, which was sponsored by the government of the Dominican Republic and the Universidad Catolica Madre y Maestra, was preceded by 2 days of field trips and was opened by President Antonio Guzman on the evening of the 17th of August. Generous support was provided by Alcoa Exploration Co., Falconbridge Dominicana, and Rosario Dominicana.Geologists and geophysicists from 25 countries presented about 130 papers on a wide variety of topics ranging from geophysics to paleontology. While the whole Caribbean area was discussed, there was special emphasis on the northern Caribbean and Hispaniola, as befitted the site of the conference. The contribution of workers from the Dirección General de Mineriá was particularly notable.

  10. Message from the Conference Chairs

    NASA Astrophysics Data System (ADS)

    Krishna, Sanjay; Perera, Unil

    2015-05-01

    We were very excited to host the 8th International Workshop on Quantum Structure Infrared Photodetectors (QSIP 2014), in picturesque Santa Fe, New Mexico from June 29th-July 3rd, 2014. This followed successful QSIP conferences at Dana Point (2000), Torino (2002), Kananaskis (2004), Kandy (2006), Yosimite (2009), Istanbul (2010) and Corsica (2012). The QSIP workshop is a high level scientific conference that aims to bring together scientists, engineers, industrial organizations, students and users in order to discuss recent advances, and to share the "State of the Art" in this field. QSIP conferences provide an international forum for attendees to present and discuss progress in infrared device physics and modeling, materials growth and processing issues, focal plane array development and characterization.

  11. Leading European Intergovernmental Research Organisations at FP6 Launch Conference

    NASA Astrophysics Data System (ADS)

    2002-11-01

    EIROforum at "European Research 2002" (Brussels, November 11-13, 2002) Go to the EIROforum website Last year, seven of Europe's leading intergovernmental research organisations set up a high-level co-ordination and collaboration group, known as EIROforum , cf. ESO PR 12/01. They include CERN (particle physics), EMBL (molecular biology), ESA (space activities), ESO (astronomy and astrophysics), ESRF (synchrotron radiation), ILL (neutron source) and EFDA (fusion). All of them have powerful research infrastructures and laboratories which are used by an extensive network of scientists. Together, they represent European spearheads in some of the most crucial basic and applied research fields. The EIROforum organisations will be highly visible at the upcoming EU-conference on "European Research 2002 - The European Research Area and the Framework Programme" , to be held on November 11-13, 2002, at the "Palais du Heysel" in Brussels (Belgium). This meeting will be attended by more than 8000 scientists and decision-makers from all over Europe and serves to launch the 6th EC Framework Programme (2002 - 2006), which will have an important impact on Europe's R&D landscape during the coming years. A joint 400 sq.m. exhibition , featuring the individual EIROforum organisations, their current programmes and many front-line achievements in their respective areas of activity, will be set up at Stand L in Hall 11 . It includes a central area, with a small cinema, displaying information about their current interactions via EIROforum. The stands will be manned throughout the conference by high-level representatives from the seven organisations. On Tuesday, November 12, 2002, 14:00 hrs, a Press Conference will take place at this exhibition stand, in the presence of the European Commissioner for Research, M. Phillippe Busquin, and most of the Directors General (or equivalent) of the EIROforum organisations. The main themes will be the increasingly intense interaction and co

  12. Preliminary results for HIP bonding Ta to W targets for the materials test station

    SciTech Connect

    Dombrowski, David E; Maloy, Stuart A

    2009-01-01

    Tungsten targets for the Materials Test Station (MTS) were clad with thin tantalum cover plates and a tantalum frame using hot isostatic pressing (HIP). A preliminary HIP parameter study showed good bonding and intimate mechanical contact for Ta cover plate thicknesses of 0.25 mm (0.010 inch) and 0.38 mm (0.015 inch). HIP temperatures of full HIP runs were 1500 C (2732 F). HIP pressure was 203 MPa (30 ksi).

  13. Mechanics of Textile Composites Conference

    SciTech Connect

    Poe, C.C.; Harris, C.E.

    1995-10-01

    This document is a compilation of papers presented at the Mechanics of Textile Composites Conference in Hampton, Virginia, December 6-8, 1994. This conference was the culmination of a 3-year program that was initiated by NASA late in 1990 to develop mechanics of textile composites in support of the NASA Advance Composites Technology Program (ACT). The goal of the program was to develop mathematical models of textile preform materials and test methods to facilitate structural analysis and design. Participants in the program were from NASA, academia, and industry. Separate abstracts were prepared for articles from this document.

  14. Ethnic minority energy conference: report

    SciTech Connect

    Not Available

    1984-01-01

    The report of a 1977 energy conference sponsored by the National Association for the Advancement of Colored People summarizes the basic concern that US energy policy was not addressing the importance of full employment or the impact of rising energy costs on the poor. Conference speakers spoke of the social and economic changes that are needed if minorities are to participate in the economics of the technological age. These include better educational opportunities and cooperation between civil rights groups and energy planners. Other topics were venture opportunities for minorities in energy-related fields and opportunities for minority advocacy and energy efficiency actions.

  15. Mechanics of Textile Composites Conference

    NASA Technical Reports Server (NTRS)

    Poe, Clarence C. (Editor); Harris, Charles E. (Editor)

    1995-01-01

    This document is a compilation of papers presented at the Mechanics of Textile Composites Conference in Hampton, Virginia, December 6-8, 1994. This conference was the culmination of a 3-year program that was initiated by NASA late in 1990 to develop mechanics of textile composites in support of the NASA Advance Composites Technology Program (ACT). The goal of the program was to develop mathematical models of textile preform materials and test methods to facilitate structural analysis and design. Participants in the program were from NASA, academia, and industry.

  16. Conference Proceedings: Health Manpower Planning Conference. May, 1971.

    ERIC Educational Resources Information Center

    Hospital Educational and Research Foundation of Pennsylvania, Camp Hill.

    A two-day Health Manpower Planning Conference was held at State College, Pennsylvania, in 1971. The speakers represented a variety of organizations with responsibility for aspects of manpower planning and others not normally involved in planning. Program content was structured in such a way as to broaden the context within which manpower issues…

  17. Inter Association Child Care Conference. Conference Proceedings 1979.

    ERIC Educational Resources Information Center

    Austin, David, Ed.

    This publication of the proceedings of the Inter Association Child Care Conference includes a debate for and against professionalization in the field of child care. A section on meeting the treatment needs of children through educational preparation of child care practitioners discusses background factors, levels of education for practitioners,…

  18. Nineteenth annual actinide separations conference: Conference program and abstracts

    SciTech Connect

    Bronson, M.

    1995-12-31

    This report contains the abstracts from the conference presentations. Sessions were divided into the following topics: Waste treatment; Spent fuel treatment; Issues and responses to Defense Nuclear Facility Safety Board 94-1; Pyrochemical technologies; Disposition technologies; and Aqueous separation technologies.

  19. 1995 International Sherwood Fusion Theory Conference

    SciTech Connect

    1995-07-01

    This book is a guide to the 1995 International Sherwood Fusion Theory Conference. It consists largely of abstracts of the oral and poster presentations that were to be made, and gives some general information about the conference and its schedule.

  20. 22 CFR 224.19 - Prehearing conferences.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... ACT § 224.19 Prehearing conferences. (a) The ALJ may schedule prehearing conferences as appropriate... exhibits; (8) Discovery; (9) The time and place for the hearing; and (10) Such other matters as may tend...