Performance assessment in algebra learning process

NASA Astrophysics Data System (ADS)

Lestariani, Ida; Sujadi, Imam; Pramudya, Ikrar

2017-12-01

The purpose of research to describe the implementation of performance assessment on algebra learning process. The subject in this research is math educator of SMAN 1 Ngawi class X. This research includes descriptive qualitative research type. Techniques of data collecting are done by observation method, interview, and documentation. Data analysis technique is done by data reduction, data presentation, and conclusion. The results showed any indication that the steps taken by the educator in applying the performance assessment are 1) preparing individual worksheets and group worksheets, 2) preparing rubric assessments for independent worksheets and groups and 3) making performance assessments rubric to learners’ performance results with individual or groups task.

How to Conduct Ethnographic Research

ERIC Educational Resources Information Center

Sangasubana, Nisaratana

2011-01-01

The purpose of this paper is to describe the process of conducting ethnographic research. Methodology definition and key characteristics are given. The stages of the research process are described including preparation, data gathering and recording, and analysis. Important issues such as reliability and validity are also discussed.

Research Progress of Building Materials Used in Construction Land

NASA Astrophysics Data System (ADS)

Niu, Yan

2018-01-01

Construction land preparation is an important aspect of land remediation project. The research of materials in the process of land improvement is the foundation and the core. Therefore, it is necessary to study the materials that may be involved in the process of building land preparation. In this paper, the research on the construction materials such as recycled concrete, geosynthetics, soil stabilizers, soil improvers, building insulation materials and inorganic fibrous insulation materials, which are commonly used in construction sites, is reviewed and discussed in this paper. Land remediation project involved in the construction of land materials to provide reference.

Climate Action Planning Process | Climate Neutral Research Campuses | NREL

Science.gov Websites

Action Planning Process Climate Action Planning Process For research campuses, NREL has developed a five-step process to develop and implement climate action plans: Determine baseline energy consumption Analyze technology options Prepare a plan and set priorities Implement the climate action plan Measure and

How to Analyze Routines in Teachers' Thinking Processes during Lesson Planning.

ERIC Educational Resources Information Center

Bromme, Rainer

A justification for the study of teachers' routines, as they affect the preparation of lesson plans, prefaces this paper on teachers' thought processes during lesson planning. In focusing on the importance of research into teachers' routines, it is pointed out that lesson preparation and classroom routines permit teachers to direct attention to…

A Narrative Analysis of the Process of Self-Authorship for Student Affairs Graduate Students

ERIC Educational Resources Information Center

Schoper, Sarah E.

2011-01-01

Research on preparation programs for student affairs professionals has focused primarily on identifying competencies. Limited attention has been paid to the process of how meaning is made of preparation program experiences. Of the scholarship conducted, minimal consideration has been paid to the relationship between development and the…

Formation of wood-plastic composites coupled with forest products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meister, J.J.; Zhang, Siyi

We have developed a method to formulate (wood/paper)-plastic composites and developed a process to prepare materials with maximum strength, durability, and rigidity. We are applying the experience gained from our research to the preparation of wood reinforced, plastic blends. The steps in the process of making wood/plastic composites are described.

Preparation of Term Papers Based upon a Research-Process Model.

ERIC Educational Resources Information Center

Feldmann, Rodney Mansfield; Schloman, Barbara Frick

1990-01-01

Described is an alternative method of term paper preparation which provides a step-by-step sequence of assignments and provides feedback to the students at all stages in the preparation of the report. An example of this model is provided including 13 sequential assignments. (CW)

[How to adapt to the requirements of "clinical value-oriented drug innovation" for pharmaceutical research in application process of new traditional Chinese medicine].

PubMed

Jin, Fang

2017-05-01

On August 9, 2015, the State Council promulgated the "Opinions of the State Council on the reform of drug and medical device review and approval system" (Guofa 2015 No. 44), and established the "clinical value-oriented drug innovation" model to encourage the research and development of new drugs. Following that, China Food and Drug Administration (CFDA) promulgated the "Notice on several policies for drug registration review and approval" (2015 No. 230 ) on November 11, 2015, clearly specifying that CFDA would "implement one-time approval for clinical trials application of the new drugs, and no longer take a phased declaration, review and approval system; for the new drugs that apply for clinical trials, mainly review the scientific natureof the clinical protocols and the risk control of the new drugs to guarantee the safety of subjects". Accordingly, the evaluation ideas and forms of new drug registration have also been adjusted greatly. For example, issues like the rationality of the drug manufacturing process, whether the scale can reflect the stability of the process, whether the preparation process is sufficient, and whether the choice of dosage form is reasonable are no longer the focus of evaluation before clinical trials. Issues regarding whether the preparation process design is reasonable, whether the effective components can be transferred to the preparation to a maximum extent, whether the process parameters determined in small and middle pilot trials can adapt to the requirements of mass production, no longer act as the reasons for refusing the clinical trials. The corresponding risks shall be borne by the applicant as the subject of liability. The focus in registration evaluation is mainly transferred to how to ensure the consistence of quality between clinical trial samples and the samples already available on market by guaranteeing stable sources of drug raw materials and stable quality of medicines as well as control of the whole preparation process. These issues run through the whole process of new drug development, but also have different focuses in different stages. According to the "Measures on communicating about drug research and development and technical review" (2016 No. 94) (On Trial) issued by CFDA on June 2, 2016, the applicants may communicate with the drug evaluation center in different phases in the process of new drugs registration in respects of medicine material problems, technological problems, and quality control of the preparations. In this paper, the transformation of Chinese medicine research model was described mainly in the following aspects: how to control the quality of medicines from origins, technology design of the preparation and technology process research, and how to establish whole-process quality system. The paper also reflects the concept that the quality of new Chinese drugs research and development comes from design. Copyright© by the Chinese Pharmaceutical Association.

Seven Maxims for Institutional Researchers: Applying Cognitive Theory and Research. AIR Forum 1982 Paper.

ERIC Educational Resources Information Center

Hackman, Judith Dozier

Seven potentially useful maxims from the field of human information processing are proposed that may help institutional researchers prepare and present information for higher education decision-makers. The maxims, which are based on research and theory about how people cognitively process information, are as follows: (1) more may not be better;…

Career Preparation: A Longitudinal, Process-Oriented Examination

PubMed Central

Stringer, Kate; Kerpelman, Jennifer; Skorikov, Vladimir

2011-01-01

Preparing for an adult career through careful planning, choosing a career, and gaining confidence to achieve career goals is a primary task during adolescence and early adulthood. The current study bridged identity process literature and career construction theory (Savickas, 2005) by examining the commitment component of career adaptability, career preparation (i.e., career planning, career decision-making, and career confidence), from an identity process perspective (Luyckx, Goossens, & Soenens, 2006). Research has suggested that career preparation dimensions are interrelated during adolescence and early adulthood; however, what remains to be known is how each dimension changes over time and the interrelationships among the dimensions during the transition from high school. Drawing parallels between career preparation and identity development dimensions, the current study addressed these questions by examining the patterns of change in each career preparation dimension and parallel process models that tested associations among the slopes and intercepts of the career preparation dimensions. Results showed that the career preparation dimensions were not developing similarly over time, although each dimension was associated cross-sectionally and longitudinally with the other dimensions. Results also suggested that career planning and decision-making precede career confidence. The results of the current study supported career construction theory and showed similarities between the processes of career preparation and identity development. PMID:21804641

Career Preparation: A Longitudinal, Process-Oriented Examination.

PubMed

Stringer, Kate; Kerpelman, Jennifer; Skorikov, Vladimir

2011-08-01

Preparing for an adult career through careful planning, choosing a career, and gaining confidence to achieve career goals is a primary task during adolescence and early adulthood. The current study bridged identity process literature and career construction theory (Savickas, 2005) by examining the commitment component of career adaptability, career preparation (i.e., career planning, career decision-making, and career confidence), from an identity process perspective (Luyckx, Goossens, & Soenens, 2006). Research has suggested that career preparation dimensions are interrelated during adolescence and early adulthood; however, what remains to be known is how each dimension changes over time and the interrelationships among the dimensions during the transition from high school. Drawing parallels between career preparation and identity development dimensions, the current study addressed these questions by examining the patterns of change in each career preparation dimension and parallel process models that tested associations among the slopes and intercepts of the career preparation dimensions. Results showed that the career preparation dimensions were not developing similarly over time, although each dimension was associated cross-sectionally and longitudinally with the other dimensions. Results also suggested that career planning and decision-making precede career confidence. The results of the current study supported career construction theory and showed similarities between the processes of career preparation and identity development.

Approaching patient engagement in research: what do patients with cardiovascular disease think?

PubMed

Finney Rutten, Lila J; Morris, Megan A; Schrader, Lisa M; Manemann, Sheila M; Pathak, Jyotishman; Dimler, Robert; Roger, Veronique L

2015-01-01

Movement toward patient-centered health care must be supported by an evidence base informed by greater patient engagement in research. Efforts to better understand patients' interest in and perspectives on involvement in the research process are fundamental to supporting movement of research programs toward greater patient engagement. We describe preliminary efforts to engage members of a community group of patients living with heart disease to better understand their interest and perspectives on involvement in research. A semi-structured focus group guide was developed to probe willingness to participate in the following three phases of research: preparation, execution, and translation. The focus group discussion, and our summary of key messages gleaned from said discussion, was organized around the phases of research that patients may be involved in, with the goal of delineating degrees of interest expressed for engagement in each phase. Consistent with what is known from the literature, a clear preference for engagement during the preparation and translation phase of the research process emerged. This preliminary conversation will guide our ongoing research efforts toward greater inclusion of patients throughout the research process.

Preparing for a career in biopharma research.

PubMed

Wu, Lawren C

2015-05-01

Many life sciences trainees in academia have limited exposure to how the biotechnology/pharmaceutical industry approaches drug discovery and development and what life is like in biopharma research. In this article, I will provide my perspectives on how to prepare for a successful career in biopharma research, focusing on technical background, an understanding of the drug discovery and development process, and personal and interpersonal keys to success. Copyright © 2015. Published by Elsevier Ltd.

Supplements in human islet culture: human serum albumin is inferior to fetal bovine serum.

PubMed

Avgoustiniatos, Efstathios S; Scott, William E; Suszynski, Thomas M; Schuurman, Henk-Jan; Nelson, Rebecca A; Rozak, Phillip R; Mueller, Kate R; Balamurugan, A N; Ansite, Jeffrey D; Fraga, Daniel W; Friberg, Andrew S; Wildey, Gina M; Tanaka, Tomohiro; Lyons, Connor A; Sutherland, David E R; Hering, Bernhard J; Papas, Klearchos K

2012-01-01

Culture of human islets before clinical transplantation or distribution for research purposes is standard practice. At the time the Edmonton protocol was introduced, clinical islet manufacturing did not include culture, and human serum albumin (HSA), instead of fetal bovine serum (FBS), was used during other steps of the process to avoid the introduction of xenogeneic material. When culture was subsequently introduced, HSA was also used for medium supplementation instead of FBS, which was typically used for research islet culture. The use of HSA as culture supplement was not evaluated before this implementation. We performed a retrospective analysis of 103 high-purity islet preparations (76 research preparations, all with FBS culture supplementation, and 27 clinical preparations, all with HSA supplementation) for oxygen consumption rate per DNA content (OCR/DNA; a measure of viability) and diabetes reversal rate in diabetic nude mice (a measure of potency). After 2-day culture, research preparations exhibited an average OCR/DNA 51% higher (p < 0.001) and an average diabetes reversal rate 54% higher (p < 0.05) than clinical preparations, despite 87% of the research islet preparations having been derived from research-grade pancreata that are considered of lower quality. In a prospective paired study on islets from eight research preparations, OCR/DNA was, on average, 27% higher with FBS supplementation than that with HSA supplementation (p < 0.05). We conclude that the quality of clinical islet preparations can be improved when culture is performed in media supplemented with serum instead of albumin.

Scientific Writing: Strategies and Tools for Students and Advisors

ERIC Educational Resources Information Center

Singh, Vikash; Mayer, Philipp

2014-01-01

Scientific writing is a demanding task and many students need more time than expected to finish their research articles. To speed up the process, we highlight some tools, strategies as well as writing guides. We recommend starting early in the research process with writing and to prepare research articles, not after but in parallel to the lab or…

FTA multi-year research program plan (FY 2009 - FY 2013).

DOT National Transportation Integrated Search

2008-09-01

The Multi-Year Research Program Plan (Program Plan), prepared by the Federal Transit Administrations (FTA) Office of : Research, Demonstration, and Innovation (TRI), is part of FTAs strategic planning process. It provides descriptive : summarie...

77 FR 58112 - Notice of Intent To Prepare an Environmental Assessment (EA) for the Proposed Conveyance of Land...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-19

..., including warehousing and distribution; research and development; technology manufacturing; food processing... warehousing and distribution; research and development; technology manufacturing; food processing and... defense manufacturing, sensor manufacturing, or medical devices; (iv) Food/Agriculture--such as wine, food...

[Preparation and antimicrobial effect of aromatic, natural and bacteriostatic foot wash with skin care].

PubMed

Gao, Su-Hua; Zhao, Guo-Xiang; Yang, Xiao-Dong; Xu, Ling-Ling

2013-06-01

To prepare the aromatic, natural and bacteriostatic foot wash with skin care and research the inhibition effect on the different bacteria and pathogenic fungus which cause dermatophytosis. It was prepared by using Sophoraflavescens and Dictamnus dasycarpus as materials with the addition of Aloe extract, essential oil, surfactant, etc. The antifungal and antibacterial activity was researched by the levitation liquid quantitative method. The foot wash smelled faintly scent. The use of this product can produce a rich foam. The inhibitory rate were all more than 90%. The preparation process of the foot wash was simple. It has obviously bacteriostatic and fungistatic effect.

Research management peer exchange hosted by the Ohio Department of Transportation, August 5-7, 2002.

DOT National Transportation Integrated Search

2002-08-01

The expressed objectives of the Peer Exchange were to: : Enhance the overall research process : Enhance implementation and tracking of research results : Improve the quality and accuracy of preliminary research cost estimates prepared : internally pr...

Alternatives for Developing User Documentation for Applications Software

DTIC Science & Technology

1991-09-01

style that is designed to match adult reading behaviors, using reader-based writing techniques, developing effective graphics , creating reference aids...involves research, analysis, design , and testing. The writer must have a solid understanding of the technical aspects of the document being prepared, good...ABSTRACT The preparation of software documentation is an iterative process that involves research, analysis, design , and testing. The writer must have

Applications Research of Microbial Ecological Preparation in Sea Cucumber Culture

NASA Astrophysics Data System (ADS)

Jiang, Jiahui; Wang, Guangyu

2017-12-01

At present, micro ecological preparation is widely applied in aquaculture with good effect. The application of micro ecological preparation in sea cucumber culture can effectively improve the economic benefits. The micro ecological preparation can play the role of inhibiting harmful bacteria, purifying water quality and saving culture cost in the process of sea cucumber culture. We should select appropriate bacteria, guarantee stable environment and use with long-term in the applications of microbial ecological preparation in sea cucumber culture to obtain good effects.

Ethical issues in research and publication.

PubMed

Iammarino, N K; O'Rourke, T W; Pigg, R M; Weinberg, A D

1989-03-01

Ethical considerations inherent in the process of research and publication represent one issue of particular concern to professionals. Members of a profession usually are guided by a code of ethics that specifies standards for practice. However, rarely do professional preparation programs sufficiently prepare students to deal with the concerns associated with research and professional publication. The authors address three specific areas of concern for health educators: the student-professor relationship, joint authorship, and ethics in publishing. Potential problems are discussed, and implications for the profession are cited.

Investigating the Attitudes of Elementary School Teachers, School Psychologists and Guidance Research Center Personnel on the Process of Preparing the Individualized Educational Program and Challenges Faced during the Related Process

ERIC Educational Resources Information Center

Tike Bafra, Leyla; Kargin, Tevhide

2009-01-01

This study aims to analyze the attitudes of elementary school teachers, school psychologists and guidance research center personnel regarding developing an individualized educational program (IEP) process as well as challenges faced during the related process, according to several variables. The study included 201 participants who were working in…

ANALYTICAL CHEMISTRY DIVISION ANNUAL PROGRESS REPORT FOR PERIOD ENDING DECEMBER 31, 1961

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1962-02-01

Research and development progress is reported on analytlcal instrumentation, dlssolver-solution analyses, special research problems, reactor projects analyses, x-ray and spectrochemical analyses, mass spectrometry, optical and electron microscopy, radiochemical analyses, nuclear analyses, inorganic preparations, organic preparations, ionic analyses, infrared spectral studies, anodization of sector coils for the Analog II Cyclotron, quality control, process analyses, and the Thermal Breeder Reactor Projects Analytical Chemistry Laboratory. (M.C.G.)

Advance Preparation in Task-Switching: Converging Evidence from Behavioral, Brain Activation, and Model-Based Approaches

PubMed Central

Karayanidis, Frini; Jamadar, Sharna; Ruge, Hannes; Phillips, Natalie; Heathcote, Andrew; Forstmann, Birte U.

2010-01-01

Recent research has taken advantage of the temporal and spatial resolution of event-related brain potentials (ERPs) and functional magnetic resonance imaging (fMRI) to identify the time course and neural circuitry of preparatory processes required to switch between different tasks. Here we overview some key findings contributing to understanding strategic processes in advance preparation. Findings from these methodologies are compatible with advance preparation conceptualized as a set of processes activated for both switch and repeat trials, but with substantial variability as a function of individual differences and task requirements. We then highlight new approaches that attempt to capitalize on this variability to link behavior and brain activation patterns. One approach examines correlations among behavioral, ERP and fMRI measures. A second “model-based” approach accounts for differences in preparatory processes by estimating quantitative model parameters that reflect latent psychological processes. We argue that integration of behavioral and neuroscientific methodologies is key to understanding the complex nature of advance preparation in task-switching. PMID:21833196

Inebriation and Inspiration? A Review of the Research on Alcohol and Creativity.

ERIC Educational Resources Information Center

Norlander, Torsten

1999-01-01

A review of research on the correlation between the intake of alcohol and creativity hypothesizes that modest alcohol consumption inhibits aspects of creativity based mainly on the secondary process (preparation, certain parts of illumination, and verification), and disinhibits those based mainly on the primary process (incubation, certain parts…

Preparation research of Nano-SiC/Ni-P composite coating under a compound field

NASA Astrophysics Data System (ADS)

Zhou, H. Z.; Wang, W. H.; Gu, Y. Q.; Liu, R.; Zhao, M. L.

2016-07-01

In this paper, the preparation process of Ni-P-SiC composite coatings on 45 steel surfaces with the assistance of magnetic and ultrasound fields was researched. The influence of external field on the surface morphology and performance of the composite layer is also discussed. Experimental results showed that when prepared under magnetic and ultrasonic fields, composite layers are significantly more dense and uniform than coatings made without external fields. Nano-SiC particles, dispersed uniformly in the layer, significantly improve the hardness of the composite layer, and the composite layer under the external field had the highest hardness at 680 HV The external fields can also accelerate deposition and increase the thickness of the layer. Compared to layers processed without the assistance of external fields, the thickness of the layers increased by nearly ten µm.

Anti-icing property of bio-inspired micro-structure superhydrophobic surfaces and heat transfer model

NASA Astrophysics Data System (ADS)

Liu, Yan; Li, Xinlin; Jin, Jingfu; Liu, Jiaan; Yan, Yuying; Han, Zhiwu; Ren, Luquan

2017-04-01

Ice accumulation is a thorny problem which may inflict serious damage even disasters in many areas, such as aircraft, power line maintenance, offshore oil platform and locators of ships. Recent researches have shed light on some promising bio-inspired anti-icing strategies to solve this problem. Inspired by typical plant surfaces with super-hydrophobic character such as lotus leaves and rose petals, structured superhydrophobic surface are prepared to discuss the anti-icing property. 7075 Al alloy, an extensively used materials in aircrafts and marine vessels, is employed as the substrates. As-prepared surfaces are acquired by laser processing after being modified by stearic acid for 1 h at room temperature. The surface morphology, chemical composition and wettability are characterized by means of SEM, XPS, Fourier transform infrared (FTIR) spectroscopy and contact angle measurements. The morphologies of structured as-prepared samples include round hump, square protuberance and mountain-range-like structure, and that the as-prepared structured surfaces shows an excellent superhydrophobic property with a WCA as high as 166 ± 2°. Furthermore, the anti-icing property of as-prepared surfaces was tested by a self-established apparatus, and the crystallization process of a cooling water on the sample was recorded. More importantly, we introduced a model to analyze heat transfer process between the droplet and the structured surfaces. This study offers an insight into understanding the heat transfer process of the superhydrophobic surface, so as to further research about its unique property against ice accumulation.

Mental and Active Preparation: Examining Variations in Women's Processes of Preparing to Leave Abusive Relationships.

PubMed

Bermea, Autumn M; Khaw, Lyndal; Hardesty, Jennifer L; Rosenbloom, Lindsay; Salerno, Craig

2017-02-01

Although the process of leaving abusive relationships has received increased research attention, preparing to leave is still largely understudied. Despite an emphasis on safety planning, not all women take active steps to prepare, and the characteristics and experiences of those who do or do not actively prepare are unknown. We address this gap with a secondary data analysis of interviews with 25 abused mothers in the process of leaving. All women initially engaged in mental planning, where they had emotionally disconnected from their partners. Using constructivist grounded theory techniques, we identified two distinct groups: those whose mental planning led to active planning ( n = 11), and those who moved directly from mental planning to leaving ( n = 14) with little time or need to actively plan. The groups differed on several individual, relationship, and child factors, which may have impacted the ability or decisions to prepare. This study supports the feminist view that survivors are not helpless victims but active agents who strategize for safety. Those who engage solely in mental planning still prepare to leave, even if they do not engage in active planning. Practitioners should consider factors affecting preparations and acknowledge mental planning as a necessary effort in leaving.

Research Directory for Manpower, Personnel, Training, and Human Factors.

DTIC Science & Technology

1991-01-01

Enhance Automatic Recognition of Speech in Noisy, Highly Stressful Environments Cofod R* Lica Systems Inc 703-359-0996 Smart Contract Preparation...Lab 301-278-2946 Smart Contract Preparation Expediter Frezell T LTCOL Human Engineering Lab 301-278-5998 Impulse Noise Hazard Information Processing R&D

Institutional Case-Based Study on the Effect of Research Methods on Project Work in the Curriculum of Mechanical Engineering Programmes in Ghanaian Polytechnics

ERIC Educational Resources Information Center

Baffour-Awuah, Emmanuel

2015-01-01

Preparing students for Project Work (PROJ 1 and PROJ 2) require them to go through Research Methods (RE) as part of the curriculum though it takes the centre stage of the entire preparation process. Knowledge of the relationships between the two could be a useful tool in improving the performance of students in the former. The purpose of the case…

Reaching the Unreached: De-Mystifying the Role of ICT in the Process of Doctoral Research

ERIC Educational Resources Information Center

Sim, Kwong Nui; Stein, Sarah

2016-01-01

Information and Communication Technology (ICT) has become a necessary element of academic practice in higher education today. Under normal circumstances, PhD students from all disciplines have to use ICT in some form throughout the process of their research, including the preparation, fieldwork, analysis and writing phases of their studies.…

The Role of Field Experience in the Preparation of Reflective Teachers

ERIC Educational Resources Information Center

Liakopoulou, Maria

2012-01-01

A basic condition for teachers developing their personal theory about teaching and utilising their knowledge in practice and perceiving and managing the complexity of the teaching process, is their ability to analyse the teaching process and to reflect on it. The research data presented in this article comes from research carried out, during which…

Flexible Pedagogies: New Pedagogical Ideas. Flexible Pedagogies: Preparing for the Future Series

ERIC Educational Resources Information Center

Ryan, Alex; Tilbury, Daniella

2014-01-01

This publication is part of our five-strand research project "Flexible Pedagogies: preparing for the future". It identifies six "new pedagogical ideas" offering new pathways for learning. These include: (1) actively involving students in learning development and processes of "co-creation" thereby challenging existing…

Forschung Zum Prozess des Mathematiklernens. Reihe: Materialien und Studien, Band 2. (Research on the Process of Mathematics Learning. Series: Materials and Studies, Volume 2.)

ERIC Educational Resources Information Center

Bielefeld Univ. (West Germany).

The ten papers in this document were developed for a meeting prepared for the Third International Congress on Mathematical Education. Each paper is concerned with research from 1970-1975 related to the mathematical learning process. The first paper describes projects conducted in England on both content and process learning. The second paper…

A LOTUS NOTES APPLICATION FOR PREPARING, REVIEWING, AND STORING NHEERL RESEARCH PROTOCOLS

EPA Science Inventory

Upon becoming QA Manager of the Health Effects Research Laboratory (HERL) in 1990, Ron became aware of the need to simplify and streamline the research planning process that Laboratory Principal Investigators (Pls) faced. Appropriately, animal studies require close scrutiny, both...

Chemical Principles of the Biotechnology of the Preparation of Fuel

NASA Astrophysics Data System (ADS)

Varfolomeev, Sergei D.; Kalyuzhnyi, S. V.; Medman, D. Ya

1988-07-01

The chemical aspects of the biotechnology of the preparation of fuels together with the potential resources and possibilities of the biofuel technology are described. The present state of research into the preparation of biogas (mixture of methane and carbon dioxide), ethanol, acetone, butyl alcohol, and hydrogen from the biomass is examined. The technological features and economic aspects of the processes listed above are analysed. The bibliography includes 213 references.

[Comprehensive analysis on "toxicity and effect" of Chinese pharmaceutical preparations].

PubMed

Hu, Hui-Ling; Fu, Chao-Mei; Zhao, Xuan; Zhang, Jin-Ming; Gao, Fei; He, Yao; Fu, Shu; Li, Ling

2016-09-01

The manufacturing process of Chinese medicines is the significant link to achieve "effect-enhancing and toxicity-reducing", including an interaction between "toxicity and effect". This paper would elucidate the effects of Chinese herbal compound decoction, preparation, dosage forms, route of administration and quality of pharmaceutical excipients on "toxicity-effect" theory from the formulation approaches. The article pointed out that the comprehensive analysis on "toxicity-effect" theory should be strengthened from the aspects of overall manufacturing, fundamental research and modern Chinese preparation, to explore the mechanism of "effect-enhancing and toxicity-reducing" in the manufacturing process, clarify the core status of Chinese preparation in "toxicity-effect" theory, and ensure the security and effectiveness in traditional Chinese medicine clinical application. Copyright© by the Chinese Pharmaceutical Association.

The implementation of skill assessment by the educators on the mathematics learning process in senior high school

NASA Astrophysics Data System (ADS)

Lestariani, I.; Sujadi, I.; Pramudya, I.

2018-03-01

The purpose of research to describe and know the implementation of skill assessment on the mathematics learning process with the high school mathematics teacher as the subject because it is less fully implemented. This research is the type of the descriptive qualitative method. The data was collecting observation method, interview and documentation. The result showed that on the planning stage of the implementation of skill assessment, there were many teachers who had not prepared all the completeness with various assessment techniques through performance, project and portfolio. The teacher was prepared the list of questions. On the implementation stage, there were many teachers who had not understand the stage of completing the assessment with the appropriate instrument method and development. On the reporting stage, discovered that teachers faced the difficulty on preparing scoring report with the range value. Aside from that, the teachers had not prepared the assessment instrument very well on the planning stage. It can be concluded that the implementation of skill assessment has been implemented but not maximally because educators don’t understand about the skill assessment and the number of instrument that must be prepared before the assessment.

Task preparation processes related to reward prediction precede those related to task-difficulty expectation

PubMed Central

Schevernels, Hanne; Krebs, Ruth M.; Santens, Patrick; Woldorff, Marty G.; Boehler, C. Nico

2013-01-01

Recently, attempts have been made to disentangle the neural underpinnings of preparatory processes related to reward and attention. Functional magnetic resonance imaging (fMRI) research showed that neural activity related to the anticipation of reward and to attentional demands invokes neural activity patterns featuring large-scale overlap, along with some differences and interactions. Due to the limited temporal resolution of fMRI, however, the temporal dynamics of these processes remain unclear. Here, we report an event-related potentials (ERP) study in which cued attentional demands and reward prospect were combined in a factorial design. Results showed that reward prediction dominated early cue processing, as well as the early and later parts of the contingent negative variation (CNV) slow-wave ERP component that has been associated with task-preparation processes. Moreover these reward-related electrophysiological effects correlated across participants with response-time speeding on reward-prospect trials. In contrast, cued attentional demands affected only the later part of the CNV, with the highest amplitudes following cues predicting high-difficulty potential-reward targets, thus suggesting maximal task preparation when the task requires it and entails reward prospect. Consequently, we suggest that task-preparation processes triggered by reward can arise earlier, and potentially more directly, than strategic top-down aspects of preparation based on attentional demands. PMID:24064071

Practitioner Research and Professional Development in Education

ERIC Educational Resources Information Center

Campbell, Anne; McNamara, Olwen; Gilroy, Peter

2004-01-01

This book aims to support and prepare practitioners to undertake small-scale inquiries and research investigations. The processes of research and inquiry-based learning help teachers come to terms with the complexities and challenges of teaching as their responsibilities widen to include the notion of the teacher as researcher. This major shift in…

The Research Resource Guide: A Description and Formative Evaluation

ERIC Educational Resources Information Center

Jones, Ethel; Ralston, Penny; Coccia, Catherine; Young-Clark, Iris; Atkinson, Cheryl; Davis, Kimberly E.; Fluellen, Vivian; Hausafus, Cheryl O.; Johnson, Linda; Prowell, Grace

2014-01-01

Undergraduate research is important for preparing the next generation of scholars in family and consumer sciences (FCS). The Research Resource Guide (RRG) was developed in response to that need; it provides comprehensive information on the research process for faculty to incorporate into undergraduate courses. The RRG comprises three levels: (a)…

[Establishment of design space for production process of traditional Chinese medicine preparation].

PubMed

Xu, Bing; Shi, Xin-Yuan; Qiao, Yan-Jiang; Wu, Zhi-Sheng; Lin, Zhao-Zhou

2013-03-01

The philosophy of quality by design (QbD) is now leading the changes in the drug manufacturing mode from the conventional test-based approach to the science and risk based approach focusing on the detailed research and understanding of the production process. Along with the constant deepening of the understanding of the manufacturing process, the design space will be determined, and the emphasis of quality control will be shifted from the quality standards to the design space. Therefore, the establishment of the design space is core step in the implementation of QbD, and it is of great importance to study the methods for building the design space. This essay proposes the concept of design space for the production process of traditional Chinese medicine (TCM) preparations, gives a systematic introduction of the concept of the design space, analyzes the feasibility and significance to build the design space in the production process of traditional Chinese medicine preparations, and proposes study approaches on the basis of examples that comply with the characteristics of traditional Chinese medicine preparations, as well as future study orientations.

Brief scale measuring patient preparedness for hospital discharge to home: Psychometric properties.

PubMed

Graumlich, James F; Novotny, Nancy L; Aldag, Jean C

2008-01-01

Adverse events occur when patients transition from the hospital to outpatient care. For quality improvement and research purposes, clinicians need appropriate, reliable, and valid survey instruments to measure and improve the discharge processes. The object was to describe psychometric properties of the Brief PREPARED (B-PREPARED) instrument to measure preparedness for hospital discharge from the patient's perspective. The study was a prospective cohort of 460 patient or proxy telephone interviews following hospital discharge home. We administered the Satisfaction with Information about Medicines Scale and the PREPARED instrument 1 week after discharge. PREPARED measured patients' perceptions of quality and outcome of the discharge-planning processes. Four weeks after discharge, interviewers elicited emergency department visits. The main outcome was the B-PREPARED scale value: the sum of scores from 11 items. Internal consistency, construct, and predictive validity were assessed. : The mean B-PREPARED scale value was 17.3 +/- 4.2 (SD) with a range of 3 to 22. High scores reflected high preparedness. Principal component analysis identified 3 domains: self-care information, equipment/services, and confidence. The B-PREPARED had acceptable internal consistency (Cronbach's alpha 0.76) and construct validity. The B-PREPARED correlated with medication information satisfaction (P < 0.001). Higher median B-PREPARED scores appropriately discriminated patients with no worry about managing at home from worriers (P < 0.001) and predicted patients without emergency department visits after discharge from those who had visits (P = 0.011). The B-PREPARED scale measured patients' perceptions of their preparedness for hospital discharge home with acceptable internal consistency and construct and predictive validity. Brevity may potentiate use by patients and proxies. Clinicians and researchers may use B-PREPARED to evaluate discharge interventions. (c) 2008 Society of Hospital Medicine.

Integrating Tax Preparation with FAFSA Completion: Three Case Models

ERIC Educational Resources Information Center

Daun-Barnett, Nathan; Mabry, Beth

2012-01-01

This research compares three different models implemented in four cities. The models integrated free tax-preparation services to assist low-income families with their completion of the Free Application for Federal Student Aid (FAFSA). There has been an increased focus on simplifying the FAFSA process. However, simplification is not the only…

Effectiveness of Teacher Training: Voices of Teachers Serving High-Needs Populations of Students

ERIC Educational Resources Information Center

Varela, Daniella G.; Maxwell, Gerri M.

2015-01-01

This study explores the effectiveness of educator preparation programs from the perspective of three female Hispanic veteran teachers serving high-needs populations of students. The study strives to contribute to research on minimum proposed standards for teacher preparation programs in Texas. Through a process of coding data from the informant…

Scholastic Audits. Research Brief

ERIC Educational Resources Information Center

Walker, Karen

2009-01-01

What is a scholastic audit? The purpose of the audit is to assist individual schools and districts improve. The focus is on gathering data and preparing recommendations that can be used to guide school improvement initiatives. Scholastic audits use a multi-step approach and include: (1) Preparing for the Audit; (2) Audit process; (3) Audit report;…

Best Practices of Award-Winning Public School Principals: Implications for University Preparation Programs

ERIC Educational Resources Information Center

Harris, Sandra L.

2006-01-01

There is no doubt that quality administrator preparation is critical because research has documented that successful school leaders have a strong influence on student achievement as they set direction, support and develop effective teachers, and as they implement effective organizational processes. Yet, it seems that every day the media reports…

Burnishing rolling process of the surface prepared in the turning process

NASA Astrophysics Data System (ADS)

Kulakowska, Agnieszka; Kukielka, Leon; Kaldunski, Pawel; Bohdal, Lukasz; Patyk, Radoslaw; Chodor, Jaroslaw; Kukielka, Krzysztof

2018-05-01

The aim of this article is to demonstrate the possibility of using burnishing rolling process as the technology of product development. The experimental researches were carried out, showing the ability to form the surface layer of the product with the desired properties. First, during turning rolling the surfaces of the samples were prepared. Then, the surfaces were burnished. The influence of turning process on the state of the surface layer parameters of C45 steel shafts are shown. Among the examined aspects the surface roughness, nano-roughness, material bearing, surface microstructure, metallographic structure were considered. Numerical simulation were conducted. Conclusions from the experiments and simulation were given.

Discomfort as a Means of Pre-Service Teachers' Professional Development--An Action Research as Part of the "Research Literacy" Course

ERIC Educational Resources Information Center

Amir, Aliza; Mandler, Daphna; Hauptman, Sara; Gorev, Dvora

2017-01-01

This paper focus on defining a research question while conducting action research among third-year students attending a course on Research Literacy at a teacher education college. This paper discusses the process of preparing for and conducting action research among third-year students attending a course on Research Literacy at a teacher education…

Polymer Infiltration Studies

NASA Technical Reports Server (NTRS)

Marchello, Joseph M.

1991-01-01

Progress was made on the preparation of carbon fiber composites using advanced polymer resins. Processes reported include powder towpreg process, weaving towpreg made from dry powder prepreg, composite from powder coated towpreg, and toughening of polyimide resin (PMR) composites by semi-interpenetrating networks. Several important areas of polymer infiltration into fiber bundles will be researched. Preparation to towpreg for textile preform weaving and braiding and for automated tow placement is a major goal, as are the continued development of prepregging technology and the various aspects of composite part fabrication.

Atmospheric Processing Platform | Photovoltaic Research | NREL

Science.gov Websites

printing units to the left and sample preparation and rapid thermal processing units to the right. In variety of substrates and then further process into optoelectronic materials using rapid thermal , however, occur within a vacuum (i.e., thermal evaporation, sputtering). Samples can remain in ambient

7 CFR 1250.309 - Handler.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE EGG RESEARCH AND PROMOTION Egg Research and Promotion Order Definitions § 1250.309 Handler. Handler means any person who receives or otherwise acquires eggs from an egg producer, and processes, prepares for marketing, or markets, such eggs...

Preparation for the Real Business World: Empirical Research in the MBA Finance Curriculum

ERIC Educational Resources Information Center

Lavin, Angeline M.; Johnson, Stephen K.

2005-01-01

The majority of MBA students receive little exposure to formal empirical research even though research and development spending at corporations around the world continues to increase. We believe that in order to be successful managers, MBA graduates need to understand the empirical research process as well as the intricacies of finance, such as…

Supercritical Fluid Technologies to Fabricate Proliposomes.

PubMed

Falconer, James R; Svirskis, Darren; Adil, Ali A; Wu, Zimei

2015-01-01

Proliposomes are stable drug carrier systems designed to form liposomes upon addition of an aqueous phase. In this review, current trends in the use of supercritical fluid (SCF) technologies to prepare proliposomes are discussed. SCF methods are used in pharmaceutical research and industry to address limitations associated with conventional methods of pro/liposome fabrication. The SCF solvent methods of proliposome preparation are eco-friendly (known as green technology) and, along with the SCF anti-solvent methods, could be advantageous over conventional methods; enabling better design of particle morphology (size and shape). The major hurdles of SCF methods include poor scalability to industrial manufacturing which may result in variable particle characteristics. In the case of SCF anti-solvent methods, another hurdle is the reliance on organic solvents. However, the amount of solvent required is typically less than that used by the conventional methods. Another hurdle is that most of the SCF methods used have complicated manufacturing processes, although once the setup has been completed, SCF technologies offer a single-step process in the preparation of proliposomes compared to the multiple steps required by many other methods. Furthermore, there is limited research into how proliposomes will be converted into liposomes for the end-user, and how such a product can be prepared reproducibly in terms of vesicle size and drug loading. These hurdles must be overcome and with more research, SCF methods, especially where the SCF acts as a solvent, have the potential to offer a strong alternative to the conventional methods to prepare proliposomes.

Commercial Mobile Device Technology Implementation Implications in United States Marine Corps Processes: A Case Study Approach

DTIC Science & Technology

2016-09-01

innovative solutions to current problems. One such innovation that could potentially save the Marine Corps money , while increasing its ability to prepare...the Marine Corps money , while increasing its ability to prepare for and conduct its mission, is the use of commercial mobile devices. This research...problems. One such innovation that could potentially save the USMC money , while increasing the ability to prepare for and conduct its mission is the

Mapping the Gaps: Redesigning a Teacher Education Program to Prepare Teachers for Inclusive, Urban U.S. Schools

ERIC Educational Resources Information Center

Zion, Shelley; Sobel, Donna M.

2014-01-01

As part of the process of redesigning an integrated general and special teacher education program to prepare candidates to meet the needs of culturally and linguistically diverse students, researchers engaged a series of focus groups with current candidates, recent graduates, and partner school personnel. Data presented in this paper identified…

Sex, pain and cranberries - ideas from the 2006 Registrar Research Workshop.

PubMed

Montgomery, Brett D; McMeniman, Erin; Cameron, Sara Kate; Duncan, Tristram; Prosser, Stuart; Moore, Ray

2007-01-01

The Registrar Research Workshop has been a feature of Australian general practice training since 1994. Twenty five general practice registrars attend the annual 3 day event, which aims to develop registrars' understanding of the research process. Presenters and facilitators are drawn from the academic general practitioner and primary health care research community. Presentations alternate with small group sessions, where groups of five registrars are guided through the process of developing a research question, identifying appropriate research methods, and addressing ethical and funding concerns, before preparing a presentation about their research proposal for their peers. Research questions are developed from unanswered questions that have arisen in registrars' clinical practice.

7 CFR 989.53 - Research and development.

Code of Federal Regulations, 2010 CFR

2010-01-01

... foreign markets by collecting data thereon, consulting with members of the trade, and making the... in domestic and foreign markets. These projects may include, but need not be limited to those... research the preparation for market, sanitation, quality, condition, storability, processing, or packaging...

7 CFR 989.53 - Research and development.

Code of Federal Regulations, 2014 CFR

2014-01-01

... foreign markets by collecting data thereon, consulting with members of the trade, and making the... in domestic and foreign markets. These projects may include, but need not be limited to those... research the preparation for market, sanitation, quality, condition, storability, processing, or packaging...

7 CFR 989.53 - Research and development.

Code of Federal Regulations, 2012 CFR

2012-01-01

... foreign markets by collecting data thereon, consulting with members of the trade, and making the... in domestic and foreign markets. These projects may include, but need not be limited to those... research the preparation for market, sanitation, quality, condition, storability, processing, or packaging...

7 CFR 989.53 - Research and development.

Code of Federal Regulations, 2011 CFR

2011-01-01

... foreign markets by collecting data thereon, consulting with members of the trade, and making the... in domestic and foreign markets. These projects may include, but need not be limited to those... research the preparation for market, sanitation, quality, condition, storability, processing, or packaging...

The NASA Space Life Sciences Training Program - Preparing the way

NASA Technical Reports Server (NTRS)

Biro, Ronald; Munsey, Bill; Long, Irene

1990-01-01

Attention is given to the goals and methods adopted in the NASA Space Life Sciences Training Program (SLSTP) for preparing scientists and engineers for space-related life-sciences research and operations. The SLSTP is based on six weeks of projects and lectures which give an overview of payload processing and experiment flow in the space environment. The topics addressed in the course of the program include descriptions of space vehicles, support hardware, equipment, and research directions. Specific lecture topics include the gravity responses of plants, mission integration of a flight experiment, and the cardiovascular deconditioning. The SLSTP is shown to be an important part of the process of recruiting and training qualified scientists and engineers to support space activities.

Use of interviews in nursing research.

PubMed

Mitchell, Gary

2015-06-24

Conducting interviews is one of the most common ways of collecting data in healthcare research. In particular, interviews are associated with qualitative research, where researchers seek to understand participants' experiences through their own words and perspectives. This article will help healthcare researchers prepare to carry out interviews as part of their research. It will also emphasise important skills to consider during the interview process. Consideration will also be given to remedying interviews that do not go according to plan, as well as identifying appropriate debriefing processes post-interview. With this knowledge, healthcare researchers are more likely to conduct effective interviews that will yield better quality data and protect the participant.

[Research & development and evaluation of oral films].

PubMed

Ren, Lian-Jie; Liu, Juan; Ma, Jun-Wei; Yan, Jia-Chen; Yin, Li-Fang

2017-10-01

Oral film is a new type of oral preparation. Due to portability, simple preparation process and good clinical compliance, oral films have become the focus of novel drug delivery system in recent years. Meanwhile, oral films have been gradually used in the development of Chinese medicine preparations. According to the application and approval situation of different types of oral films both at home and abroad in recent years, their research and development status was analyzed, including the basic concept, formulation, manufacturing process and quality control, as well as related progress and development prospects of oral films applied in traditional Chinese medicine. Some suggestions on the technical evaluation of oral films were put forward by considering specific requirements from regulatory agencies. This paper could provide some references for the development and evaluation of oral films. Due to the complexity of the drug substances and the particularity of the drug product, the development and application of oral films in traditional Chinese medicine are still faced with opportunity and challenges. Copyright© by the Chinese Pharmaceutical Association.

Preparing Teachers to Apply Research to Mathematics Teaching: Using Design-Based Research to Define and Assess the Process of Evidence-Based Practice

ERIC Educational Resources Information Center

van Ingen, Sarah

2013-01-01

Persistent lack of mathematics achievement and disparity in achievement has led to the publication of research findings related to equitable teaching practices. Although the publication of such research provides insights about approaches for potentially increasing equity in mathematics education, teachers must be able to apply what has been…

Understanding, Selecting, and Integrating a Theoretical Framework in Dissertation Research: Creating the Blueprint for Your "House"

ERIC Educational Resources Information Center

Grant, Cynthia; Osanloo, Azadeh

2014-01-01

The theoretical framework is one of the most important aspects in the research process, yet is often misunderstood by doctoral candidates as they prepare their dissertation research study. The importance of theory-driven thinking and acting is emphasized in relation to the selection of a topic, the development of research questions, the…

Applications of Micro/Nanoparticles in Microfluidic Sensors: A Review

PubMed Central

Jiang, Yusheng; Wang, Hui; Li, Shunbo; Wen, Weijia

2014-01-01

This paper reviews the applications of micro/nanoparticles in microfluidics device fabrication and analytical processing. In general, researchers have focused on two properties of particles—electric behavior and magnetic behavior. The applications of micro/nanoparticles could be summarized on the chip fabrication level and on the processing level. In the fabrication of microfluidic chips (chip fabrication level), particles are good additives in polydimethylsiloxane (PDMS) to prepare conductive or magnetic composites which have wide applications in sensors, valves and actuators. On the other hand, particles could be manipulated according to their electric and magnetic properties under external electric and magnetic fields when they are travelling in microchannels (processing level). Researchers have made a great progress in preparing modified PDMS and investigating the behaviors of particles in microchannels. This article attempts to present a discussion on the basis of particles applications in microfluidics. PMID:24755517

Preparing Protocols for Institutional Review Boards.

ERIC Educational Resources Information Center

Lyons, Charles M.

1983-01-01

Introduces the process by which Institutional Review Boards (IRBs) review proposals for research involving human subjects. Describes the composition of IRBs. Presents the Nuremberg code, the elements of informed consent, the judging criteria for proposals, and a sample protocol format. References newly published regulations governing research with…

Synthesis of Hollow Sphere and 1D Structural Materials by Sol-Gel Process.

PubMed

Li, Fa-Liang; Zhang, Hai-Jun

2017-08-25

The sol-gel method is a simple and facile wet chemical process for fabricating advanced materials with high homogeneity, high purity, and excellent chemical reactivity at a relatively low temperature. By adjusting the processing parameters, the sol-gel technique can be used to prepare hollow sphere and 1D structural materials that exhibit a wide application in the fields of catalyst, drug or gene carriers, photoactive, sensors and Li-ion batteries. This feature article reviewed the development of the preparation of hollow sphere and 1D structural materials using the sol-gel method. The effects of calcination temperature, soaking time, pH value, surfactant, etc., on the preparation of hollow sphere and 1D structural materials were summarized, and their formation mechanisms were generalized. Finally, possible future research directions of the sol-gel technique were outlined.

Synthesis of Hollow Sphere and 1D Structural Materials by Sol-Gel Process

PubMed Central

Li, Fa-Liang; Zhang, Hai-Jun

2017-01-01

The sol-gel method is a simple and facile wet chemical process for fabricating advanced materials with high homogeneity, high purity, and excellent chemical reactivity at a relatively low temperature. By adjusting the processing parameters, the sol-gel technique can be used to prepare hollow sphere and 1D structural materials that exhibit a wide application in the fields of catalyst, drug or gene carriers, photoactive, sensors and Li-ion batteries. This feature article reviewed the development of the preparation of hollow sphere and 1D structural materials using the sol-gel method. The effects of calcination temperature, soaking time, pH value, surfactant, etc., on the preparation of hollow sphere and 1D structural materials were summarized, and their formation mechanisms were generalized. Finally, possible future research directions of the sol-gel technique were outlined. PMID:28841188

Veg-03 Pillows Preparation for Flight

NASA Image and Video Library

2016-03-21

Inside a laboratory in the Space Station Processing Facility at NASA’s Kennedy Space Center in Florida, research scientists prepare the plant pillows for the Veg-03 experiment that will be delivered to the International Space Station aboard the eighth SpaceX Dragon commercial resupply mission. Dr. Mathew Mickens, a post-doctoral researcher, inserts a bonding agent into one of the Veg-03 plant pillows. The Veg-03 plant pillows will contain ‘Tokyo Bekana’ cabbage seeds and lettuce seeds for NASA’s third Veggie plant growth system experiment. The experiment will continue NASA’s deep space plant growth research to benefit the Earth and the agency’s journey to Mars.

The impact of funding deadlines on personal workloads, stress and family relationships: a qualitative study of Australian researchers

PubMed Central

Herbert, Danielle L; Coveney, John; Clarke, Philip; Graves, Nicholas; Barnett, Adrian G

2014-01-01

Objective To examine the impact of applying for funding on personal workloads, stress and family relationships. Design Qualitative study of researchers preparing grant proposals. Setting Web-based survey on applying for the annual National Health and Medical Research Council (NHMRC) Project Grant scheme. Participants Australian researchers (n=215). Results Almost all agreed that preparing their proposals always took top priority over other work (97%) and personal (87%) commitments. Almost all researchers agreed that they became stressed by the workload (93%) and restricted their holidays during the grant writing season (88%). Most researchers agreed that they submitted proposals because chance is involved in being successful (75%), due to performance requirements at their institution (60%) and pressure from their colleagues to submit proposals (53%). Almost all researchers supported changes to the current processes to submit proposals (95%) and peer review (90%). Most researchers (59%) provided extensive comments on the impact of writing proposals on their work life and home life. Six major work life themes were: (1) top priority; (2) career development; (3) stress at work; (4) benefits at work; (5) time spent at work and (6) pressure from colleagues. Six major home life themes were: (1) restricting family holidays; (2) time spent on work at home; (3) impact on children; (4) stress at home; (5) impact on family and friends and (6) impact on partner. Additional impacts on the mental health and well-being of researchers were identified. Conclusions The process of preparing grant proposals for a single annual deadline is stressful, time consuming and conflicts with family responsibilities. The timing of the funding cycle could be shifted to minimise applicant burden, give Australian researchers more time to work on actual research and to be with their families. PMID:24682577

The impact of funding deadlines on personal workloads, stress and family relationships: a qualitative study of Australian researchers.

PubMed

Herbert, Danielle L; Coveney, John; Clarke, Philip; Graves, Nicholas; Barnett, Adrian G

2014-03-28

To examine the impact of applying for funding on personal workloads, stress and family relationships. Qualitative study of researchers preparing grant proposals. Web-based survey on applying for the annual National Health and Medical Research Council (NHMRC) Project Grant scheme. Australian researchers (n=215). Almost all agreed that preparing their proposals always took top priority over other work (97%) and personal (87%) commitments. Almost all researchers agreed that they became stressed by the workload (93%) and restricted their holidays during the grant writing season (88%). Most researchers agreed that they submitted proposals because chance is involved in being successful (75%), due to performance requirements at their institution (60%) and pressure from their colleagues to submit proposals (53%). Almost all researchers supported changes to the current processes to submit proposals (95%) and peer review (90%). Most researchers (59%) provided extensive comments on the impact of writing proposals on their work life and home life. Six major work life themes were: (1) top priority; (2) career development; (3) stress at work; (4) benefits at work; (5) time spent at work and (6) pressure from colleagues. Six major home life themes were: (1) restricting family holidays; (2) time spent on work at home; (3) impact on children; (4) stress at home; (5) impact on family and friends and (6) impact on partner. Additional impacts on the mental health and well-being of researchers were identified. The process of preparing grant proposals for a single annual deadline is stressful, time consuming and conflicts with family responsibilities. The timing of the funding cycle could be shifted to minimise applicant burden, give Australian researchers more time to work on actual research and to be with their families.

New Teacher Induction Programs: A Case Study of an Exemplary School District, and How It Prepares Its New Teachers for the Use of Instructional Technology in the Classroom

ERIC Educational Resources Information Center

Sherman, David B.

2014-01-01

This research study examined Generation Y new teachers, the process of new teacher induction, and the most effective methods for providing professional development in instructional technology for Generation Y teachers. This research study examined Generation Y new teachers, the process of new teacher induction, and the most effective methods for…

National Study of Word Processing Installations in Selected Business Organizations. A Report on the National Word Processing Research Study of Delta Pi Epsilon.

ERIC Educational Resources Information Center

Scriven, Jolene D.; And Others

A study was conducted (1) to determine current practices in word processing installations in selected organizations throughout the United States, and (2) to ascertain anticipated future developments in word processing as well as to provide recommendations for educational institutions that prepare workers for business offices. Seven interview…

Research and the planned Space Experiment Research and Processing Laboratory

NASA Technical Reports Server (NTRS)

2000-01-01

Original photo and caption dated October 8, 1991: 'Plant researchers Neil Yorio and Lisa Ruffe prepare to harvest a crop of Waldann's Green Lettuce from KSC's Biomass Production Chamber (BPC). KSC researchers have grown several different crops in the BPC to determine which plants will better produce food, water and oxygen on long-duration space missions.' Their work is an example of the type of life sciences research that will be conducted at the Space Experiment Research Procession Laboratory (SERPL). The SERPL is a planned 100,000-square-foot laboratory that will provide expanded and upgraded facilities for hosting International Space Station experiment processing. In addition, it will provide better support for other biological and life sciences payload processing at KSC. It will serve as a magnet facility for a planned 400-acre Space Station Commerce Park.

Research and the planned Space Experiment Research and Processing Laboratory

NASA Technical Reports Server (NTRS)

2000-01-01

Original photo and caption dated October 8, 1991: 'Plant researchers Lisa Ruffe and Neil Yorio prepare to harvest a crop of Waldann's Green Lettuce from KSC's Biomass Production Chamber (BPC). KSC researchers have grown several different crops in the BPC to determine which plants will better produce food, water and oxygen on long-duration space missions.' Their work is an example of the type of life sciences research that will be conducted at the Space Experiment Research Procession Laboratory (SERPL). The SERPL is a planned 100,000-square-foot laboratory that will provide expanded and upgraded facilities for hosting International Space Station experiment processing. In addition, it will provide better support for other biological and life sciences payload processing at KSC. It will serve as a magnet facility for a planned 400-acre Space Station Commerce Park.

Report on Department of Homeland Security Sponsored Research Project at Lawrence Livermore National Laboratory on Preparation for an Improvised Nuclear Device Event

DOE Office of Scientific and Technical Information (OSTI.GOV)

A., B

2008-07-31

Following the events of September 11th, a litany of imaginable horribles was trotted out before an anxious and concerned public. To date, government agencies and academics are still grappling with how to best respond to such catastrophes, and as Senator Lieberman's quote says above, now is the time to plan and prepare for such events. One of the nation's worst fears is that terrorists might detonate an improvised nuclear device (IND) in an American city. With 9/11 serving as the catalyst, the government and many NGOs have invested money into research and development of response capabilities throughout the country. Yet,more » there is still much to learn about how to best respond to an IND event. My summer 2008 internship at Lawrence Livermore National Laboratory afforded me the opportunity to look in depth at the preparedness process and the research that has been conducted on this issue. While at the laboratory I was tasked to collect, combine, and process research on how cities and the federal government can best prepare for the horrific prospect of an IND event. Specific projects that I was involved with were meeting reports, research reviews, and a full project report. Working directly with Brooke Buddemeier and his support team at the National Atmospheric Release Advisory Center, I was able to witness first hand, preparation for meetings with response planners to inform them of the challenges that an IND event would pose to the affected communities. In addition, I supported the Homeland Security Institute team (HSI), which was looking at IND preparation and preparing a Congressional report. I participated in meetings at which local responders expressed their concerns and contributed valuable information to the response plan. I specialized in the psycho-social aspects of an IND event and served as a technical advisor to some of the research groups. Alongside attending and supporting these meetings, I worked on an independent research project which collected information from across disciplines to outline where the state of knowledge on IND response is. In addition, the report looked at meetings that were held over the summer in various cities. The meetings were attended by both federal responders and local responders. The meetings explored issues regarding IND preparation and how to mitigate the effects of an IND detonation. Looking at the research and current preparation activity the report found that the state of knowledge in responding and communicating is a mixed bag. Some aspects of an IND attack are well understood, some are not, but much is left to synthesize. The effects of an IND would be devastating, yet much can be done to mitigate those effects through education, preparation, and research. A major gap in current knowledge is how to effectively communicate with the public before an attack. Little research on the effectiveness of public education has been done, but it is likely that educating the public about the effects of an IND and how to best protect oneself could save many lives.« less

The Professional Preparation of Malaysian Teachers in the Implementation of Teaching and Learning of Mathematics and Science in English

ERIC Educational Resources Information Center

Idris, Noraini; Cheong, Loh Sau; Nor, Norjoharuddeen Mohd.; Razak, Ahmad Zabidi Abdul; Saad, Rahimi Md.

2007-01-01

Malaysia is in the process of changing the medium of instruction for mathematics and science from Malay to English since 2003. To ensure the success of this transition, teachers have to be professional prepared to teach in English. This research aimed to survey the Malaysian science/mathematics teachers' perception towards this professional…

A Grounded Research Perspective for Motivating College Students' Self-Regulated Learning Behaviors: Preparing and Gaining the Cooperation, Commitment of Teachers.

ERIC Educational Resources Information Center

Talbot, Gilles L.

This paper suggests that the processes one would have college teachers use to motivate students closely parallel those that should be used to gain the cooperation, commitment, and preparation of teachers for this task. It discusses the "learning orientation" versus "grading orientation" of students, along with "class-side manners" that college…

Ethical challenges embedded in qualitative research interviews with close relatives.

PubMed

Haahr, Anita; Norlyk, Annelise; Hall, Elisabeth Oc

2014-02-01

Nurse researchers engaged in qualitative interviews with patients and spouses in healthcare may often experience being in unforeseen ethical dilemmas. Researchers are guided by the bioethical principles of justice, beneficence, non-maleficence, respect for human rights and respect for autonomy through the entire research process. However, these principles are not sufficient to prepare researchers for unanticipated ethical dilemmas related to qualitative research interviews. We describe and discuss ethically challenging and difficult moments embedded in two cases from our own phenomenological interview studies. We argue that qualitative interviews involve navigation between being guided by bioethics as a researcher, being a therapist/nurse and being a fellow human being or even a friend. The researchers' premises to react to unexpected situations and act in a sound ethical manner must be enhanced, and there is a need for an increased focus on the researchers' ethical preparation and to continually address and discuss cases from their own interviews.

The Development of Online Tutorial Program Design Using Problem-Based Learning in Open Distance Learning System

ERIC Educational Resources Information Center

Said, Asnah; Syarif, Edy

2016-01-01

This research aimed to evaluate of online tutorial program design by applying problem-based learning Research Methods currently implemented in the system of Open Distance Learning (ODL). The students must take a Research Methods course to prepare themselves for academic writing projects. Problem-based learning basically emphasizes the process of…

Crime Laboratory Proficiency Testing Research Program.

ERIC Educational Resources Information Center

Peterson, Joseph L.; And Others

A three-year research effort was conducted to design a crime laboratory proficiency testing program encompassing the United States. The objectives were to: (1) determine the feasibility of preparation and distribution of different classes of physical evidence; (2) assess the accuracy of criminalistics laboratories in the processing of selected…

"Chance favors only the prepared mind": preparing minds to systematically reduce hazards in the testing process in primary care.

PubMed

Singh, Ranjit; Hickner, John; Mold, Jim; Singh, Gurdev

2014-03-01

Testing plays a vital role in primary care. Failures in the process are common and can be harmful. As the great 19th century microbiologist Louis Pasteur put it "chance favors only the prepared mind." Our objective is to prepare minds in primary care practices to improve safety in the testing process. Various principles from safety science can be applied. A prospective methodology that uses an anonymous practice survey based on concepts from failure modes and effects analysis is proposed. Responses are used to rank perceived hazards in the testing process, leading to prioritization of areas for intervention. Secondary data analysis (using data from a study of medication safety) was used to explore the value of this approach in the context of assessing the testing process. At 3 primary care practice sites, a total of 61 staff members completed 4 survey items examining the testing process. Comparison across practices shows that each has a distinct profile of hazards, which would lead each on a different path toward improvement. The proposed approach treats each practice as a unique complex adaptive system aiming to help it thrive by inculcating trust, mutual respect, and collaboration. Implications for patient safety research and practice are discussed.

Selection of a suitable method for the preparation of polymeric nanoparticles: multi-criteria decision making approach.

PubMed

Krishnamoorthy, Kannan; Mahalingam, Manikandan

2015-03-01

The present study is aimed to select the suitable method for preparation of camptothecin loaded polymeric nanoparticles by utilizing the multi-criteria decision making method. Novel approaches of drug delivery by formulation using nanotechnology are revolutionizing the future of medicine. Recent years have witnessed unprecedented growth of research and application in the area of nanotechnology. Nanoparticles have become an important area of research in the field of drug delivery because they have the ability to deliver a wide range of drug to varying areas of body. Despite of extensive research and development, polymeric nanoparticles are frequently used to improve the therapeutic effect of drugs. A number of techniques are available for the preparation of polymeric nanoparticles. The Analytical Hierarchy Process (AHP) is a method for decision making, which are derived from individual judgements for qualitative factors, using the pair-wise comparison matrix. In AHP, a decision hierarchy is constructed with a goal, criteria and alternatives. The model uses three main criteria 1) Instrument, 2) Process and Output and 3) Cost. In addition, there are eight sub-criteria's as well as eight alternatives. Pair-wise comparison matrixes are used to obtain the overall priority weight and ranking for the selection of suitable method. Nanoprecipitation technique is the most suitable method for the preparation of camptothecin loaded polymeric nanoparticles with the highest overall priority weight of 0.297 CONCLUSION: In particular, the result indicates that the priority weights obtained from AHP could be defined as a multiple output for finding out the most suitable method for preparation of camptothecin loaded polymeric nanoparticles.

The Complexity of Workplace Review.

ERIC Educational Resources Information Center

Kleimann, Susan D.

1991-01-01

Analyzes the document review process in organizations as described in the literature and describes 1 real-life case at the General Accounting Office in which 20 drafts are written and 9 people review them a total of 31 times. Discusses additional research needed to prepare students for this process. (SR)

The Analysis of Nine Process-Concepts in Elementary Science. Technical Report No. 428.

ERIC Educational Resources Information Center

Klausmeier, Herbert J.; And Others

Theory and research background regarding the teaching of concepts are presented. Procedures are given in detail on how a concept can be analyzed in order to aid in teaching and preparing instructional materials. Nine processes of science drawn from a published elementary science curriculum ("Science: A Process Approach") are treated as concepts…

Getting started in research: designing and preparing to conduct a research study.

PubMed

Macfarlane, Matthew D; Kisely, Steve; Loi, Samantha; Macfarlane, Stephen; Merry, Sally; Parker, Stephen; Power, Brian; Siskind, Dan; Smith, Geoff; Looi, Jeffrey C

2015-02-01

To discuss common pitfalls and useful tips in designing a quantitative research study, the importance and process of ethical approval, and consideration of funding. Through careful planning, based on formulation of a research question, early career researchers can design and conduct quantitative research projects within the framework of the Scholarly Project or in their own independent projects. © The Royal Australian and New Zealand College of Psychiatrists 2014.

How to Write Your First Research Paper

PubMed Central

Kallestinova, Elena D.

2011-01-01

Writing a research manuscript is an intimidating process for many novice writers in the sciences. One of the stumbling blocks is the beginning of the process and creating the first draft. This paper presents guidelines on how to initiate the writing process and draft each section of a research manuscript. The paper discusses seven rules that allow the writer to prepare a well-structured and comprehensive manuscript for a publication submission. In addition, the author lists different strategies for successful revision. Each of those strategies represents a step in the revision process and should help the writer improve the quality of the manuscript. The paper could be considered a brief manual for publication. PMID:21966034

How to write your first research paper.

PubMed

Kallestinova, Elena D

2011-09-01

Writing a research manuscript is an intimidating process for many novice writers in the sciences. One of the stumbling blocks is the beginning of the process and creating the first draft. This paper presents guidelines on how to initiate the writing process and draft each section of a research manuscript. The paper discusses seven rules that allow the writer to prepare a well-structured and comprehensive manuscript for a publication submission. In addition, the author lists different strategies for successful revision. Each of those strategies represents a step in the revision process and should help the writer improve the quality of the manuscript. The paper could be considered a brief manual for publication. Copyright © 2011.

An application framework of three-dimensional reconstruction and measurement for endodontic research.

PubMed

Gao, Yuan; Peters, Ove A; Wu, Hongkun; Zhou, Xuedong

2009-02-01

The purpose of this study was to customize an application framework by using the MeVisLab image processing and visualization platform for three-dimensional reconstruction and assessment of tooth and root canal morphology. One maxillary first molar was scanned before and after preparation with ProTaper by using micro-computed tomography. With a customized application framework based on MeVisLab, internal and external anatomy was reconstructed. Furthermore, the dimensions of root canal and radicular dentin were quantified, and effects of canal preparation were assessed. Finally, a virtual preparation with risk analysis was performed to simulate the removal of a broken instrument. This application framework provided an economical platform and met current requirements of endodontic research. The broad-based use of high-quality free software and the resulting exchange of experience might help to improve the quality of endodontic research with micro-computed tomography.

Nano-sized crystalline drug production by milling technology.

PubMed

Moribe, Kunikazu; Ueda, Keisuke; Limwikrant, Waree; Higashi, Kenjirou; Yamamoto, Keiji

2013-01-01

Nano-formulation of poorly water-soluble drugs has been developed to enhance drug dissolution. In this review, we introduce nano-milling technology described in recently published papers. Factors affecting the size of drug crystals are compared based on the preparation methods and drug and excipient types. A top-down approach using the comminution process is a method conventionally used to prepare crystalline drug nanoparticles. Wet milling using media is well studied and several wet-milled drug formulations are now on the market. Several trials on drug nanosuspension preparation using different apparatuses, materials, and conditions have been reported. Wet milling using a high-pressure homogenizer is another alternative to preparing production-scale drug nanosuspensions. Dry milling is a simple method of preparing a solid-state drug nano-formulation. The effect of size on the dissolution of a drug from nanoparticles is an area of fundamental research, but it is sometimes incorrectly evaluated. Here, we discuss evaluation procedures and the associated problems. Lastly, the importance of quality control, process optimization, and physicochemical characterization are briefly discussed.

Going to the Source: Research Paper Writing Experience.

ERIC Educational Resources Information Center

Rooney, Theresa

2000-01-01

First years students' experiences and knowledge about research paper writing were studied to investigate how strongly the process writing movement has influenced instructional practice, and how appropriately students have been prepared for their college experience. Finds that many of the students arrived at college without the experience of…

Marketing Education National Research Conference Report (Pittsburgh, Pennsylvania, April 15-17, 1988).

ERIC Educational Resources Information Center

Palmieri, Frank, Ed.

These proceedings contain eight presentations related to research in the areas of marketing and distributive education: "Desired Student Preparation in the Job Application Process as Perceived by the Business Community" (Thomas Allen, Jr.); "Effective Marketing Techniques for Collegiate Business Education Programs" (Ralph Wray); "Alabama Marketing…

Microfluidic Sample Preparation for Diagnostic Cytopathology

PubMed Central

Mach, Albert J.; Adeyiga, Oladunni B.; Di Carlo, Dino

2014-01-01

The cellular components of body fluids are routinely analyzed to identify disease and treatment approaches. While significant focus has been placed on developing cell analysis technologies, tools to automate the preparation of cellular specimens have been more limited, especially for body fluids beyond blood. Preparation steps include separating, concentrating, and exposing cells to reagents. Sample preparation continues to be routinely performed off-chip by technicians, preventing cell-based point-of-care diagnostics, increasing the cost of tests, and reducing the consistency of the final analysis following multiple manually-performed steps. Here, we review the assortment of biofluids for which suspended cells are analyzed, along with their characteristics and diagnostic value. We present an overview of the conventional sample preparation processes for cytological diagnosis. We finally discuss the challenges and opportunities in developing microfluidic devices for the purpose of automating or miniaturizing these processes, with particular emphases on preparing large or small volume samples, working with samples of high cellularity, automating multi-step processes, and obtaining high purity subpopulations of cells. We hope to convey the importance of and help identify new research directions addressing the vast biological and clinical applications in preparing and analyzing the array of available biological fluids. Successfully addressing the challenges described in this review can lead to inexpensive systems to improve diagnostic accuracy while simultaneously reducing overall systemic healthcare costs. PMID:23380972

Energy and Environment Division annual report, 1978

DOE Office of Scientific and Technical Information (OSTI.GOV)

Camp, J.A.

1978-01-01

Research activities of this Division are reported under nine separate programs, namely: Energy Analysis; Solar Energy; Energy-Efficient Buildings; Chemical Process Research and Development; Environmental Research; Atmospheric Aerosol Research; Oil Shale Research; Instrumentation Development; and Combustion Research. A separate abstract was prepared for each of the nine programs, each of which contained several individual research summaries, with responsible researchers listed. All of the abstracts will appear in Energy Research Abstracts (ERA), and five will appear in Energy Abstracts for Policy Analysis (EAPA).

Summary Report of National Study of Word Processing Installations in Selected Business Organizations. A Summary of a Report on the National Word Processing Research Study of Delta Pi Epsilon.

ERIC Educational Resources Information Center

Scriven, Jolene D.; And Others

A study sought to determine current practices in word processing installations located in selected organizations throughout the United States. A related problem was to ascertain anticipated future developments in word processing to provide information for educational institutions preparing workers for the business office. Six interview instruments…

Insights on the poster preparation and presentation process.

PubMed

Moore, L W; Augspurger, P; King, M O; Proffitt, C

2001-05-01

Dissemination of research findings and effective clinical innovations is key to the growth and development of the nursing profession. Several avenues exist for the dissemination of information. One forum for communication that has gained increased recognition over the past decade is the poster presentation. Poster presentations are often a significant part of regional, national, and international nursing conferences. Although posters are frequently used to disseminate information to the nursing community, little is reported about actual poster presenters' experiences with preparation and presentation of their posters. The purpose of this article is to present insights derived from information shared by poster presenters regarding the poster preparation and presentation process. Such insights derived from the personal experiences of poster presenters may assist others to efficiently and effectively prepare and present scholarly posters that disseminate information to the nursing community. Copyright 2001 by W.B. Saunders Company

Infrared Spectroscopic Study on Structural Change and Interfacial Interaction in Rubber Composites Filled with Silica-Kaolin Hybrid Fillers

NASA Astrophysics Data System (ADS)

Chen, Y.; Guan, J.; Hu, H.; Gao, H.; Zhang, L.

2016-07-01

A series of natural rubber/styrene butadiene rubber/polybutadiene rubber composites was prepared with nanometer silica and micron kaolin by a dry modification process, mechanical compounding, and mold vulcanization. Fourier transform infrared spectroscopy and a scanning electron microscope were used to investigate the structural changes and interfacial interactions in composites. The results showed that the "seesaw" structure was formed particularly with the incorporation of silica particles in the preparation process, which would be beneficial to the dispersibility of fillers in the rubber matrix. The kaolinite platelets were generally arranged in directional alignment. Kaolinite with smaller particle size and low-defect structure was more stable in preparation, but kaolinite with larger particle size and high defect structure tended to change the crystal structure. The composite prepared in this research exhibited excellent mechanical and thermal properties.

Thin film processing of photorefractive BaTiO3

NASA Technical Reports Server (NTRS)

Schuster, Paul R.; Potember, Richard S.

1991-01-01

The principle objectives of this ongoing research involve the preparation and characterization of polycrystalline single-domain thin films of BaTiO3 for photorefractive applications. These films must be continuous, free of cracks, and of high optical quality. The two methods proposed are sputtering and sol-gel related processing.

Powdered hide for research on tanning mechanisms

USDA-ARS?s Scientific Manuscript database

The conversion of animal hides into leather, the most valuable coproduct of the US meat industry, is a multistep process that has evolved more as art form than as science. A variety of dehairing and other hide preparation processes have been adopted without an understanding of how they affect the c...

Basic Research on Oxynitride Glasses.

DTIC Science & Technology

1982-07-01

The upsurge in interest in these glasses was originally motivated by their relevance to the processing of Si 3 1 4 -based ceramics (4, 5) when it was...are suggested by results obtained so far, among them refractory glass - ceramics , leach-resistant glasses , hardened optical windows, and Joining...compositions for ceramic - ceramic seals. Oxynitride Glass Synthesis The preparation of oxynitride glasses is more complex than preparation of conventional

Communicating Risks and Benefits in Informed Consent for Research: A Qualitative Study

PubMed Central

Nusbaum, Lika; Douglas, Brenda; Damus, Karla; Paasche-Orlow, Michael; Estrella-Luna, Neenah

2017-01-01

Multiple studies have documented major limitations in the informed consent process for the recruitment of clinical research participants. One challenging aspect of this process is successful communication of risks and benefits to potential research participants. This study explored the opinions and attitudes of informed consent experts about conveying risks and benefits to inform the development of a survey about the perspectives of research nurses who are responsible for obtaining informed consent for clinical trials. The major themes identified were strategies for risks and benefits communication, ensuring comprehension, and preparation for the role of the consent administrator. From the experts’ perspective, inadequate education and training of the research staff responsible for informed consent process contribute to deficiencies in the informed consent process and risks and benefits communication. Inconsistencies in experts’ opinions and critique of certain widely used communication practices require further consideration and additional research. PMID:28975139

Extraction of Data from a Hospital Information System to Perform Process Mining.

PubMed

Neira, Ricardo Alfredo Quintano; de Vries, Gert-Jan; Caffarel, Jennifer; Stretton, Erin

2017-01-01

The aim of this work is to share our experience in relevant data extraction from a hospital information system in preparation for a research study using process mining techniques. The steps performed were: research definition, mapping the normative processes, identification of tables and fields names of the database, and extraction of data. We then offer lessons learned during data extraction phase. Any errors made in the extraction phase will propagate and have implications on subsequent analyses. Thus, it is essential to take the time needed and devote sufficient attention to detail to perform all activities with the goal of ensuring high quality of the extracted data. We hope this work will be informative for other researchers to plan and execute extraction of data for process mining research studies.

Question Builder: Be Prepared for Your Next Medical Appointment

MedlinePlus

... Scientific Peer Review Award Process Post-Award Grant Management AHRQ Grantee Profiles Getting Recognition for Your AHRQ-Funded Study Contracts Project Research Online Database (PROD) Searchable database of AHRQ ...

Veg-03 Pillows Preparation for Flight

NASA Image and Video Library

2016-03-21

Inside a laboratory in the Space Station Processing Facility at NASA’s Kennedy Space Center in Florida, research scientists prepare the plant pillows for the Veg-03 experiment that will be delivered to the International Space Station aboard the eighth SpaceX Dragon commercial resupply mission. From left, are Matt Romeyn, NASA pathways intern; Dr. Gioia Massa, NASA payload scientist for Veggie; and Dr. Mathew Mickens, a post-doctoral researcher. The Veg-03 plant pillows will contain ‘Tokyo Bekana’ cabbage seeds and lettuce seeds for NASA’s third Veggie plant growth system experiment. The experiment will continue NASA’s deep space plant growth research to benefit the Earth and the agency’s journey to Mars.

Polymer infiltration studies

NASA Technical Reports Server (NTRS)

Marchello, Joseph M.

1992-01-01

Progress was made in several areas on the preparation of carbon fiber composites using advanced polymer resins. Polymer infiltration studies dealt with ways of preparing composite materials from advanced polymer resins and carbon fibers. This effort is comprised of an integrated approach to the process of composite part fabrication. The goal is to produce advanced composite materials for automated part fabrication using textile and robotics technology in the manufacture of subsonic and supersonic aircraft. The object is achieved through investigations at the NASA Langley Research Center and by stimulating technology transfer between contract researchers and the aircraft industry. Covered here are literature reviews, a status report on individual projects, current and planned research, publications, and scheduled technical presentations.

Technical Writing and Communication in a Senior-Level Seminar

NASA Astrophysics Data System (ADS)

Wallner, A. S.; Latosi-Sawin, Elizabeth

1999-10-01

To prepare chemistry majors for entry into graduate school and professional life, a senior-level seminar has been designed at Missouri Western State College that introduces students to scientific journals and aspects of professional communication. Students select topics, conduct research, report progress, write summaries for technical and nontechnical audiences, prepare abstracts, organize outlines, and present a formal research paper. At semester's end, each student delivers a 45-minute seminar to peers and departmental faculty, using easily learned presentation software. Faculty who would adopt this approach need to guide student research, emphasize purpose and audience, illustrate a synthesis of sources, support writing as a process, and help students overcome their fear of public speaking.

From Passive to Proactive: Understanding and Improving the Borrower Experience with Online Student Loan Exit Counseling. Research Report

ERIC Educational Resources Information Center

Fernandez, Chris

2015-01-01

Legally mandated student loan exit counseling attempts to prepare borrowers of federal student loans for the repayment process; yet, researchers hypothesized that the online modules most borrowers use for this purpose have significant shortcomings. This report (the second in a series of five from TG Research) describes a study in which researchers…

Ultralight Graphene/Carbon Nanotubes Aerogels with Compressibility and Oil Absorption Properties.

PubMed

Zhao, Da; Yu, Li; Liu, Dongxu

2018-04-22

Graphene aerogels have many advantages, such as low density, high elasticity and strong adsorption. They are considered to be widely applicable in many fields. At present, the most valuable research area aims to find a convenient and effective way to prepare graphene aerogels with excellent properties. In this work graphene/carbon nanotube aerogels are prepared through hydrothermal reduction, freeze-drying and high temperature heat treatment with the blending of graphene oxide and carbon nanotubes. A new reducing agent-ascorbic acid is selected to explore the best preparation process. The prepared aerogels have compression and resilience and oil absorption properties due to the addition of carbon nanotubes as designed.

Determination of protein carbonyls in plasma, cell extracts, tissue homogenates, isolated proteins: Focus on sample preparation and derivatization conditions

PubMed Central

Weber, Daniela; Davies, Michael J.; Grune, Tilman

2015-01-01

Protein oxidation is involved in regulatory physiological events as well as in damage to tissues and is thought to play a key role in the pathophysiology of diseases and in the aging process. Protein-bound carbonyls represent a marker of global protein oxidation, as they are generated by multiple different reactive oxygen species in blood, tissues and cells. Sample preparation and stabilization are key steps in the accurate quantification of oxidation-related products and examination of physiological/pathological processes. This review therefore focuses on the sample preparation processes used in the most relevant methods to detect protein carbonyls after derivatization with 2,4-dinitrophenylhydrazine with an emphasis on measurement in plasma, cells, organ homogenates, isolated proteins and organelles. Sample preparation, derivatization conditions and protein handling are presented for the spectrophotometric and HPLC method as well as for immunoblotting and ELISA. An extensive overview covering these methods in previously published articles is given for researchers who plan to measure protein carbonyls in different samples. PMID:26141921

Determination of protein carbonyls in plasma, cell extracts, tissue homogenates, isolated proteins: Focus on sample preparation and derivatization conditions.

PubMed

Weber, Daniela; Davies, Michael J; Grune, Tilman

2015-08-01

Protein oxidation is involved in regulatory physiological events as well as in damage to tissues and is thought to play a key role in the pathophysiology of diseases and in the aging process. Protein-bound carbonyls represent a marker of global protein oxidation, as they are generated by multiple different reactive oxygen species in blood, tissues and cells. Sample preparation and stabilization are key steps in the accurate quantification of oxidation-related products and examination of physiological/pathological processes. This review therefore focuses on the sample preparation processes used in the most relevant methods to detect protein carbonyls after derivatization with 2,4-dinitrophenylhydrazine with an emphasis on measurement in plasma, cells, organ homogenates, isolated proteins and organelles. Sample preparation, derivatization conditions and protein handling are presented for the spectrophotometric and HPLC method as well as for immunoblotting and ELISA. An extensive overview covering these methods in previously published articles is given for researchers who plan to measure protein carbonyls in different samples. © 2015 Published by Elsevier Ltd.

Expedition 9 Soyuz Rollout

NASA Image and Video Library

2004-04-16

The Engineer of the rollout locomotive waves hello as he prepares to back the train away from the launch pad leaving the Soyuz TMA-4 capsule and its booster rocket at the Baikonur Cosmodrome in Kazakhstan on on Saturday, April 17, 2004, in Baikonur, Kazakhstan in preparation for the launch of the Expedition 9 crew and a European researcher to the International Space Station on April 19. The Soyuz vehicle is transported to the launch pad horizontally on a railcar from its processing hangar in a process that takes about 2.5 hours to complete. Photo Credit: (NASA/Bill Ingalls)

Verification and Validation of Neural Networks for Aerospace Systems

NASA Technical Reports Server (NTRS)

Mackall, Dale; Nelson, Stacy; Schumman, Johann; Clancy, Daniel (Technical Monitor)

2002-01-01

The Dryden Flight Research Center V&V working group and NASA Ames Research Center Automated Software Engineering (ASE) group collaborated to prepare this report. The purpose is to describe V&V processes and methods for certification of neural networks for aerospace applications, particularly adaptive flight control systems like Intelligent Flight Control Systems (IFCS) that use neural networks. This report is divided into the following two sections: 1) Overview of Adaptive Systems; and 2) V&V Processes/Methods.

Verification and Validation of Neural Networks for Aerospace Systems

NASA Technical Reports Server (NTRS)

Mackall, Dale; Nelson, Stacy; Schumann, Johann

2002-01-01

The Dryden Flight Research Center V&V working group and NASA Ames Research Center Automated Software Engineering (ASE) group collaborated to prepare this report. The purpose is to describe V&V processes and methods for certification of neural networks for aerospace applications, particularly adaptive flight control systems like Intelligent Flight Control Systems (IFCS) that use neural networks. This report is divided into the following two sections: Overview of Adaptive Systems and V&V Processes/Methods.

'The artist's piece is already in the stone': constructing creativity in paleontology laboratories.

PubMed

Wylie, Caitlin Donahue

2015-02-01

Laboratory technicians are typically portrayed as manual workers following routine procedures to produce scientific data. However, technicians in vertebrate paleontology laboratories often describe their work in terms of creativity and artistry. Fossil specimens undergo extensive preparation--including rock removal, damage repair, and reconstruction of missing parts--to become accessible to researchers. Technicians called 'fossil preparators' choose, apply, and sometimes invent these preparation methods. They have no formal training, no standard protocols, and few publications to consult on techniques. Despite the resulting diversity of people and practices, preparators and their work are usually absent from research publications, making them 'invisible technicians' in Steven Shapin's sense. But preparators reject the view of their work as predictable or simple; in particular, many preparators value art training, the aesthetics of prepared fossils, and the process of creative problem-solving in their work. Based on interviews and participant observation and drawing from literature in science studies, sociology of work, and anthropology of craft, I ask why these technicians compare themselves with artists and how this portrayal affects scientific practice and social order in laboratories. I argue that associating artistry and creativity with their work distances preparators from ideas of unskilled technical work and technicians' low status, thus improving their social role in the laboratory community and preserving their power over laboratory practices.

Survey of risks and benefits communication strategies by research nurses.

PubMed

Nusbaum, Lika; Douglas, Brenda; Estrella-Luna, Neenah; Paasche-Orlow, Michael; Damus, Karla

2017-01-01

An ethical, informed consent process requires that potential participants understand the study, their rights, and the risks and benefits. Yet, despite strategies to improve communication, many participants still lack understanding of potential risks and benefits. Investigating attitudes and practices of research nurses can identify ways to improve the informed consent process. What are the attitudes, practices, and preparedness of nurses involved in the informed consent process regarding communication of risks and benefits? A survey was developed and administered online to a national purposive sample of 107 research nurses with experience obtaining informed consent for clinical trials. Survey responses stratified by selected work-related characteristics were analyzed. Ethical considerations: Participants were instructed they need not answer each question and could stop at any time. They consented by clicking "accept" on the email which linked to the survey. The study was approved by the Northeastern University Institutional Review Board, Boston, Massachusetts (NU-IRB Protocol #: 13-06-17). Most research nurses (87%) used a teach-back method to assess participant comprehension, while 72% relied on their intuition. About one-third did not feel prepared to communicate related statistics. About 20% did not feel prepared to tailor information, and half did not feel competent using supplemental materials to enhance risks and benefits comprehension. Only 70% had received training in the informed consent process which included in-person training (84%), case studies (69%), online courses (57%), feedback during practice sessions (54%), and simulation, such as role playing (49%) and viewing videos (45%). Perceived preparedness was significantly associated with greater informed consent experience and training. Research nurses may have inadequate training to encourage, support, and reinforce communication of risks and benefits during the informed consent process. Relevant purposeful education and training should help to improve and standardize the ethical informed consent process.

KSC-05PD-0369

NASA Technical Reports Server (NTRS)

2005-01-01

KENNEDY SPACE CENTER, FLA. In the Space Station Processing Facility, workers prepare the Human Research Facility-2 (HRF-2) science rack for installation into the Multi-Purpose Logistics Module Raffaello for flight on Space Shuttle Discoverys Return to Flight mission, STS-114. The HRF-2 will deliver additional biomedical instrumentation and research capability to the International Space Station. HRF-1, installed on the U.S. Lab since May 2001, contains an ultrasound unit and gas analyzer. Both racks provide structural, power, thermal, command and data handling, and communication and tracking interfaces between the HRF biomedical instrumentation and the U.S. Laboratory, Destiny. NASA Kennedy Space Center and their prime contractor responsible for ISS element processing, The Boeing Company, prepared the rack for installation. The HRF Project is managed by NASA Johnson Space Center and implemented through contract with Lockheed Martin, Houston, Texas.

Selection of a Suitable Method for the Preparation of Polymeric Nanoparticles: Multi-Criteria Decision Making Approach

PubMed Central

Krishnamoorthy, Kannan; Mahalingam, Manikandan

2015-01-01

Purpose: The present study is aimed to select the suitable method for preparation of camptothecin loaded polymeric nanoparticles by utilizing the multi-criteria decision making method. Novel approaches of drug delivery by formulation using nanotechnology are revolutionizing the future of medicine. Recent years have witnessed unprecedented growth of research and application in the area of nanotechnology. Nanoparticles have become an important area of research in the field of drug delivery because they have the ability to deliver a wide range of drug to varying areas of body. Methods: Despite of extensive research and development, polymeric nanoparticles are frequently used to improve the therapeutic effect of drugs. A number of techniques are available for the preparation of polymeric nanoparticles. The Analytical Hierarchy Process (AHP) is a method for decision making, which are derived from individual judgements for qualitative factors, using the pair-wise comparison matrix. In AHP, a decision hierarchy is constructed with a goal, criteria and alternatives. Results: The model uses three main criteria 1) Instrument, 2) Process and Output and 3) Cost. In addition, there are eight sub-criteria’s as well as eight alternatives. Pair-wise comparison matrixes are used to obtain the overall priority weight and ranking for the selection of suitable method. Nanoprecipitation technique is the most suitable method for the preparation of camptothecin loaded polymeric nanoparticles with the highest overall priority weight of 0.297 Conclusion: In particular, the result indicates that the priority weights obtained from AHP could be defined as a multiple output for finding out the most suitable method for preparation of camptothecin loaded polymeric nanoparticles. PMID:25789220

Silicone absorption of elastomeric closures--an accelerated study.

PubMed

Degrazio, F L; Hlobik, T; Vaughan, S

1998-01-01

There is a trend in the parenteral industry to move from the use of elastomeric closures which are washed, siliconized, dried and sterilized in-house at the pharmaceutical manufacturers' site to pre-prepared closures purchased from the closure supplier. This preparation can consist of washing to reduce particle-load and bioburden, siliconization, placement in ready-to-sterilize bags and may eventually extend to sterilization by steam autoclave or gamma irradiation. Since silicone oil lubrication is critical to the processability/machinability of closures, research was designed to investigate this phenomenon in closures prepared using the Westar RS (Ready-to-Sterilize) process. This paper presents the data gathered in a study of the characteristic of silicone absorption into elastomeric closures under accelerated conditions. Variables such as silicone viscosity, rubber formulation, effect of sterilization and others are considered.

The High Tech Road to Making an Oral Report.

ERIC Educational Resources Information Center

Wirths, Claudine G.; Bowman-Kruhm, Mary

Using the "3 R's of Reporting" (Research, Reinforce, Rehearse) provides the process secondary students need to overcome their fear of making oral presentations. Much of this anxiety can be reduced by teaching students to use electronic supports for the research, preparation, and delivery of oral reports. Online bulletin board systems,…

From Baccalaureate to the Professoriate: Cooperating to Increase Access to Graduate Education

ERIC Educational Resources Information Center

Allen, Barbara McFadden; Zepeda, Yolanda

2007-01-01

The Committee on Institutional Cooperation (CIC), the academic consortium of twelve research universities located in eight midwestern states, piloted the Summer Research Opportunities Program (SROP) in 1986 to encourage minority students to consider graduate education and help them prepare for the graduate admissions process. In addition to SROP,…

Selective laser sintering of calcium phosphate materials for orthopedic implants

NASA Astrophysics Data System (ADS)

Lee, Goonhee

Two technologies, Solid Freeform Fabrication (SFF) and bioceramics are combined in this work to prepare bone replacement implants with complex geometry. SFF has emerged as a crucial technique for rapid prototyping in the last decade. Selective Laser Sintering (SLS) is one of the established SFF manufacturing processes that can build three-dimensional objects directly from computer models without part-specific tooling or human intervention. Meanwhile, there have been great efforts to develop implantable materials that can assist in regeneration of bone defects and injuries. However, little attention has been focused in shaping bones from these materials. The main thrust of this research was to develop a process that can combine those two separate efforts. The specific objective of this research is to develop a process that can construct bone replacement material of complex geometry from synthetic calcium phosphate materials by using the SLS process. The achievement of this goal can have a significant impact on the quality of health care in the sense that complete custom-fit bone and tooth structures suitable for implantation can be prepared within 24--48 hours of receipt of geometric information obtained either from patient Computed Tomographic (CT) data, from Computer Aided Design (CAD) software or from other imaging systems such as Magnetic Resonance Imaging (MRI) and Holographic Laser Range Imaging (HLRI). In this research, two different processes have been developed. First is the SLS fabrication of porous bone implants. In this effort, systematic procedures have been established and calcium phosphate implants were successfully fabricated from various sources of geometric information. These efforts include material selection and preparation, SLS process parameter optimization, and development of post-processing techniques within the 48-hour time frame. Post-processing allows accurate control of geometry and of the chemistry of calcium phosphate, as well as control of micro and macro pore structure, to maximize bone healing and provide sufficient mechanical strength. It also permits the complete removal of the polymeric binders that are resided in the SLS process. In collaboration with the University of Texas Health Science Center at San Antonio and BioMedical Enterprises, Inc., porous implants based on anatomical geometry have been successfully implanted in rabbits and dogs. These histologic animal studies reveal excellent biocompatibility and show its great potential for commercial custom-fit implant manufacture. The second research effort involves fabrication of fully dense bone for application in dental restoration and load-bearing orthopedic functions. Calcium phosphate glass melts, proven to be biocompatible in the first effort, were cast into carbon molds. Processes were developed for preparing the molds. These carbon molds of anatomic shape can be prepared from either Computer Numerical Control (CNC) milling of slab stock or SLS processing of thermoset-coated graphite powder. The CNC milling method provides accurate dimension of the molds in a short period of time, however, the capable geometries are limited; generally two pieces of molds are required for complex shapes. The SLS method provides very complex shape green molds. However, they need to go through pyrolysis of thermoset binder to provide the high temperature capability reached at calcium phosphate melt temperatures (1100°C) and noticeable shrinkage was observed during pyrolysis. The cast glass was annealed to develop polycrystalline calcium phosphate. This process also exhibits great potential.

Process-Oriented Guided Inquiry Learning: POGIL and the POGIL Project

ERIC Educational Resources Information Center

Moog, Richard S.; Creegan, Frank J.; Hanson, David M.; Spencer, James N.; Straumanis, Andrei R.

2006-01-01

Recent research indicates that students learn best when they are actively engaged and they construct their own understanding. Process-Oriented Guided Inquiry Learning (POGIL) is a student-centered instructional philosophy based on these concepts in which students work in teams on specially prepared activities that follow a learning cycle paradigm.…

Introducing the Process into Tertiary Level ESP Writing Classes.

ERIC Educational Resources Information Center

Rea, Simon; Brewster, Eric

1993-01-01

Insights from first- and second-language learning research have been used to help prepare a process-based writing course for large nonnative speaker classes at a commercial and technical university in Austria. Methods used during the 21-hour course are described, including think-aloud writing tapes. (Contains 32 references.) (Author/LB)

Facilitating Adult Learning and a Researcher Identity through a Higher Education Pedagogical Process

ERIC Educational Resources Information Center

Wright, Lisa L.; Lange, Elizabeth; Da Costa, Jose

2009-01-01

This empirical study uses auto-ethnography to describe a higher education pedagogical process that facilitated largely doctoral students in preparing their candidacy proposals through the use of specific adult learning principles. Students' experiences and points of view of such a learning environment were explored, including: (1) how they…

Called to Serve: The Military Mobilization of Undergraduates

ERIC Educational Resources Information Center

Bauman, Mark C.

2009-01-01

The purpose of this study was to answer the following research question: What is the process by which undergraduate students, recalled for military duty, prepare for mobilization, separate from their institution and then re-enroll upon their release from active duty, and how is this process affected by meaning? Using the grounded theory tradition,…

SCICEX Topsounder Data Processing Transition

DTIC Science & Technology

2018-05-29

2011-2014 May 29, 2018 Reporting Period: 12/23/2015 - 03/31/2018 Prepared for: Office of Naval Research 875 North Randolph Street...unlimited. UNCLASSIFIED 2 LONG-TERM GOALS Arctic sea ice thickness is critical to geophysical research into climate change, shipping, biological...productivity and other things. The overall goal of this work is to produce a public archive of ice draft data for research . The data is meant to

A Health Science Process Framework for Comprehensive Clinical Functional Assessment

DTIC Science & Technology

2014-02-01

Services (CMS), a Research , Measurement, Assessment, Design, and Analysis (RMADA) IDIQ with the primary task order targeting improving the disability ...2014 TYPE OF REPORT: Annual PREPARED FOR: U.S. Army Medical Research and Materiel Command Fort Detrick, Maryland 21702-5012 DISTRIBUTION STATEMENT...U.S. Army Medical Research and Materiel Command Fort Detrick, Maryland 21702-5012 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 12. DISTRIBUTION

Seventh BES (Basic Energy Sciences) catalysis and surface chemistry research conference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-03-01

Research programs on catalysis and surface chemistry are presented. A total of fifty-seven topics are included. Areas of research include heterogeneous catalysis; catalysis in hydrogenation, desulfurization, gasification, and redox reactions; studies of surface properties and surface active sites; catalyst supports; chemical activation, deactivation; selectivity, chemical preparation; molecular structure studies; sorption and dissociation. Individual projects are processed separately for the data bases. (CBS)

Outlining and dictating scientific manuscripts is a useful method for health researchers: A focus group interview.

PubMed

Andresen, Kristoffer; Laursen, Jannie; Rosenberg, Jacob

2018-01-01

Young researchers may experience difficulties when writing scientific articles for publication in biomedical journals. Various methods may facilitate the writing process including outlining the paper before the actual writing and using dictation instead of writing the first draft. The aim of this study was to investigate the experiences and difficulties for young, experienced researchers when writing articles using a detailed outline and dictation of the first draft. We used qualitative focus group interviews and the study was reported according to the COnsolidated criteria for REporting Qualitative research guideline. Participants were sampled from a group of researchers participating in a writing retreat/course. The interviews were recorded on a digital recorder and transcribed. The text was analyzed according to content analysis and coded and condensed into themes and subthemes. Groups of participants were added until data saturation was reached. A total of 14 researchers participated (9 women and 5 men). Their clinical experience was median (range) of 6 (1-11) years since graduation from medical school. Two themes arose during the analyses of the data: "Process guidance with the outline as the map" and "arrival at dictation." The outline was used in the preparation phase leading up to the day of dictation and was used in collaboration with co-authors and supervisors. The participants found it to be a useful tool for preparing the manuscript and dictating their initial first full draft. Experienced young researchers found beneficial effects of using a structured outline to prepare for dictation of scientific articles. The outline was a tool that would develop in close collaboration with co-authors and mentors. With dictation, a full first draft of a manuscript can be produced in a few hours. Participants positively evaluated this structured and reproducible way of producing scientific articles.

Developing the skills required for evidence-based practice.

PubMed

French, B

1998-01-01

The current health care environment requires practitioners with the skills to find and apply the best currently available evidence for effective health care, to contribute to the development of evidence-based practice protocols, and to evaluate the impact of utilizing validated research findings in practice. Current approaches to teaching research are based mainly on gaining skills by participation in the research process. Emphasis on the requirement for rigour in the process of creating new knowledge is assumed to lead to skill in the process of using research information created by others. This article reflects upon the requirements for evidence-based practice, and the degree to which current approaches to teaching research prepare practitioners who are able to find, evaluate and best use currently available research information. The potential for using the principles of systematic review as a teaching and learning strategy for research is explored, and some of the possible strengths and weakness of this approach are highlighted.

Selene: A Videogame for Learning about the Moon

NASA Astrophysics Data System (ADS)

Wood, C. A.; Reese, D. D.

2008-06-01

The Selene game-based, metaphor-enhanced (GaME) learning object prepares players with concrete knowledge of basic lunar geology processes. Selene is embedded within an online research environment studying learning and assessment within videogames.

The use of applied software for the professional training of students studying humanities

NASA Astrophysics Data System (ADS)

Sadchikova, A. S.; Rodin, M. M.

2017-01-01

Research practice is an integral part of humanities students' training process. In this regard the training process is to include modern information techniques of the training process of students studying humanities. This paper examines the most popular applied software products used for data processing in social science. For testing purposes we selected the most commonly preferred professional packages: MS Excel, IBM SPSS Statistics, STATISTICA, STADIA. Moreover the article contains testing results of a specialized software Prikladnoy Sotsiolog that is applicable for the preparation stage of the research. The specialised software were tested during one term in groups of students studying humanities.

Multicenter Cell Processing for Cardiovascular Regenerative Medicine Applications - The Cardiovascular Cell Therapy Research Network (CCTRN) Experience

PubMed Central

Gee, Adrian P.; Richman, Sara; Durett, April; McKenna, David; Traverse, Jay; Henry, Timothy; Fisk, Diann; Pepine, Carl; Bloom, Jeannette; Willerson, James; Prater, Karen; Zhao, David; Koç, Jane Reese; Ellis, Steven; Taylor, Doris; Cogle, Christopher; Moyé, Lemuel; Simari, Robert; Skarlatos, Sonia

2013-01-01

Background Aims Multi-center cellular therapy clinical trials require the establishment and implementation of standardized cell processing protocols and associated quality control mechanisms. The aims here were to develop such an infrastructure in support of the Cardiovascular Cell Therapy Research Network (CCTRN) and to report on the results of processing for the first 60 patients. Methods Standardized cell preparations, consisting of autologous bone marrow mononuclear cells, prepared using the Sepax device were manufactured at each of the five processing facilities that supported the clinical treatment centers. Processing staff underwent centralized training that included proficiency evaluation. Quality was subsequently monitored by a central quality control program that included product evaluation by the CCTRN biorepositories. Results Data from the first 60 procedures demonstrate that uniform products, that met all release criteria, could be manufactured at all five sites within 7 hours of receipt of the bone marrow. Uniformity was facilitated by use of the automated systems (the Sepax for processing and the Endosafe device for endotoxin testing), standardized procedures and centralized quality control. Conclusions Complex multicenter cell therapy and regenerative medicine protocols can, where necessary, successfully utilize local processing facilities once an effective infrastructure is in place to provide training, and quality control. PMID:20524773

Research for Policy (R4P): development of a reflection tool for researchers to improve knowledge utilization.

PubMed

Hegger, Ingrid; Marks, Lisanne K; Janssen, Susan W J; Schuit, Albertine J; Keijsers, Jolanda F M; van Oers, Hans A M

2016-09-30

To improve knowledge utilization in policymaking, alignment between researchers and policymakers during knowledge production is essential, but difficult to maintain. In three previously reported case studies, we extensively evaluated complex research projects commissioned by policymakers to investigate how alignment is achieved in a research process and to discover ways to enhance knowledge contributions to health policy. In the present study, we investigated how the findings of these three research projects could be integrated into a practical tool for researchers to enhance their contribution to evidence-based policy. A cross-case analysis was conducted to integrate the findings of the evaluation of the three research projects and to identify important alignment areas in these projects. By means of an iterative process, we prepared a tool that includes reflection questions for researchers. The "Research for Policy" tool was tested with input from the project managers of three new research projects. Based on the findings, the final version of the Research for Policy tool was prepared. By cross-case analysis of the three case studies, the following important alignment areas were identified: the goal, quality, relevance, timing, and presentation of research, the tasks and authorities of actors, the consultative structure and vertical alignment within organizations, and the organizational environment. The project managers regarded the Research for Policy tool as a useful checklist for addressing the important alignment areas in a research project. Based on their feedback, the illustrative examples from the case studies were added to the reflection questions. The project managers suggested making the tool accessible not only to researchers but also to policymakers. The format of the Research for Policy tool was further adjusted to users' needs by adding clickable links. Alignment between research and policymaking requires continuous efforts and a clear understanding of process issues in the research project. The Research for Policy tool offers practical alignment guidance and facilitates reflection on process issues, which supports researchers in aligning with policymakers and in acting in a context-sensitive way.

SmaggIce User Guide. 1.0

NASA Technical Reports Server (NTRS)

Baez, Marivell; Vickerman, Mary; Choo, Yung

2000-01-01

SmaggIce (Surface Modeling And Grid Generation for Iced Airfoils) is one of NASNs aircraft icing research codes developed at the Glenn Research Center. It is a software toolkit used in the process of aerodynamic performance prediction of iced airfoils. It includes tools which complement the 2D grid-based Computational Fluid Dynamics (CFD) process: geometry probing; surface preparation for gridding: smoothing and re-discretization of geometry. Future releases will also include support for all aspects of gridding: domain decomposition; perimeter discretization; grid generation and modification.

Heat and Mass Transfer Processes in Scrubber of Flue Gas Heat Recovery Device

NASA Astrophysics Data System (ADS)

Veidenbergs, Ivars; Blumberga, Dagnija; Vigants, Edgars; Kozuhars, Grigorijs

2010-01-01

The paper deals with the heat and mass transfer process research in a flue gas heat recovery device, where complicated cooling, evaporation and condensation processes are taking place simultaneously. The analogy between heat and mass transfer is used during the process of analysis. In order to prepare a detailed process analysis based on heat and mass process descriptive equations, as well as the correlation for wet gas parameter calculation, software in the Microsoft Office Excel environment is being developed.

A review of photocatalysts prepared by sol-gel method for VOCs removal.

PubMed

Tseng, Ting Ke; Lin, Yi Shing; Chen, Yi Ju; Chu, Hsin

2010-05-28

The sol-gel process is a wet-chemical technique (chemical solution deposition), which has been widely used in the fields of materials science, ceramic engineering, and especially in the preparation of photocatalysts. Volatile organic compounds (VOCs) are prevalent components of indoor air pollution. Among the approaches to remove VOCs from indoor air, photocatalytic oxidation (PCO) is regarded as a promising method. This paper is a review of the status of research on the sol-gel method for photocatalyst preparation and for the PCO purification of VOCs. The review and discussion will focus on the preparation and coating of various photocatalysts, operational parameters, and will provide an overview of general PCO models described in the literature.

Ultralight Graphene/Carbon Nanotubes Aerogels with Compressibility and Oil Absorption Properties

PubMed Central

Zhao, Da; Yu, Li; Liu, Dongxu

2018-01-01

Graphene aerogels have many advantages, such as low density, high elasticity and strong adsorption. They are considered to be widely applicable in many fields. At present, the most valuable research area aims to find a convenient and effective way to prepare graphene aerogels with excellent properties. In this work graphene/carbon nanotube aerogels are prepared through hydrothermal reduction, freeze-drying and high temperature heat treatment with the blending of graphene oxide and carbon nanotubes. A new reducing agent-ascorbic acid is selected to explore the best preparation process. The prepared aerogels have compression and resilience and oil absorption properties due to the addition of carbon nanotubes as designed. PMID:29690559

Production and study of radionuclides at the research institute of atomic reactors (NIIAR)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karelin, E.A.; Gordeev, Y.N.; Filimonov, V.T.

1995-01-01

The main works of the Radionuclide Sources and Preparations Department (ORIP) of the Research Institute of Atomic Reactors (NIIAR) are summarized. The major activity of the Radionuclide Sources and Preparations Department (ORIP) is aimed at production of radioactive preparations of trans-plutonium elements (TPE) and also of lighter elements (from P to Ir), manufacture of ionizing radiation sources thereof, and scientific research to develop new technologies. One of the radionuclides that recently has received major attention is gadolinium-153. Photon sources based on it are used in densimeters for diagnostics of bone deseases. The procedure for separating gadolinium and europium, which ismore » currently used at the Research Institute of Atomic Reactors (NILAR), is based on europium cementation with the use of sodium amalgam. The method, though efficient, did not until recently permit an exhaustive removal of radioactive europium from {sup 153}Gd. The authors have thoroughly studied the separation process in semi-countercurrent mode, using citrate solutions. A special attention was given to the composition of europium complex species.« less

Rocket Research at Georgia Tech.

DTIC Science & Technology

1981-11-01

samples were prepared by dry pressing 30% Valley Met H- 30 aluminum, 7% carnauba wax , and 63% 100 P AP. One sample was prepared using as received H-30, a...Al, and Carnauba wax powders. Sandwiches with aluminum in the binder lamina. Both pre-oxidation and pre-stretching treatments of aluminum particles...two different processes. 1. Dry-pressing powder mixtures in which polymeric binder is replaced by carnauba wax powder. 2. Hand mixing small samples of

Inside KSC! for June 2, 2017

NASA Image and Video Library

2017-06-06

Preparations are underway to launch the latest resupply run to the International Space Station. Another SpaceX Falcon 9 will lift off from historic Launch Complex 39A. The Dragon spacecraft will spend about a month attached to the space station and return to Earth in early July. The spacecraft is filled with supplies and experiments for more than 250 science and research investigations - all prepared in Kennedy’s world-class Space Station Processing Facility.

Research progress in photolectric materials of CuFeS2

NASA Astrophysics Data System (ADS)

Jing, Mingxing; Li, Jing; Liu, Kegao

2018-03-01

CuFeS2 as a photoelectric material, there are many advantages, such as high optical absorption coefficient, direct gap semiconductor, thermal stability, no photo-recession effect and so on. Because of its low price, abundant reserves and non-toxic, CuFeS2 has attracted extensive attention of scientists.Preparation method of thin film solar cells are included that Electrodeposition, sputtering, thermal evaporation, thermal spraying method, co-reduction method.In this paper, the development of CuFeS2 thin films prepared by co-reduction method and co-reduction method is introduced.In this paper, the structure and development of solar cells, advantages of CuFeS2 as solar cell material, the structure and photoelectric properties and magnetic properties of CuFeS2, preparation process analysis of CuFeS2 thin film, research and development of CuFeS2 in solar cells is included herein. Finally, the development trend of CuFeS2 optoelectronic materials is analyzed and further research directions are proposed.

WHO Expert Committee on specifications for pharmaceutical preparations.

PubMed

2010-01-01

The Expert Committee on Specifications for Pharmaceutical Preparations works towards clear, independent and practical standards and guidelines for the quality assurance of medicines. Standards are developed by the Committee through worldwide consultation and an international consensus-building process. The following new guidelines were adopted and recommended for use: good practices for pharmaceutical quality control laboratories; supplementary guidelines for active pharmaceutical ingredients; good manufacturing practices for pharmaceutical products containing hazardous substances; good manufacturing practices for sterile pharmaceutical products; good distribution practices for pharmaceutical products; guidelines on the requalification of prequalified dossiers: and guidelines for the preparation of a contract research organization master file.

Preparing Pre-Service Teachers as Emancipatory and Participatory Action Researchers in a Teacher Education Programme

ERIC Educational Resources Information Center

Esau, Omar

2013-01-01

In this paper I analyse the potential that participatory action research holds for educating pre-service teachers to become more critically reflective and socially conscious. I also describe the rationale for and process of engaging pre-service teachers in their teacher education programme. Involving these candidate teachers in participatory…

Becoming a Truly Helpful Teacher: Considerably More Challenging, and Potentially More Fun, than Merely Doing Business as Usual

ERIC Educational Resources Information Center

Jason, Hilliard

2007-01-01

Few medical faculty members are adequately prepared for their instructional responsibilities. Our educational traditions were established before we had research-based understandings of the teaching-learning process and before brain research began informing our understandings of how humans achieve lasting learning. Yet, there are several advantages…

Why Students Do Not Prepare for Math Placement Exams: Student Perspectives. CCRC Research Brief. Number 57

ERIC Educational Resources Information Center

Fay, Maggie P.; Bickerstaff, Susan; Hodara, Michelle

2013-01-01

Drawn from surveys completed by 122 students enrolled in developmental math at four community colleges and from seven student focus groups with a total of 34 developmental math students at those same colleges, this research brief illuminates student experiences with and perspectives on the math assessment and placement process. Findings suggest…

An Assessment of Decision-Making Processes: The Feasibility of Incorporating Climate Change Information into Land Protection Planning (External Review Draft)

EPA Science Inventory

This report was prepared by the Global Change Research Program (GCRP) in the National Center for Environmental Assessment (NCEA) of the Office of Research and Development (ORD) at the U.S. Environmental Protection Agency (EPA). This draft report is a review of decision-making pro...

A streamlined collecting and preparation protocol for DNA barcoding of Lepidoptera as part of large-scale rapid biodiversity assessment projects, exemplified by the Indonesian Biodiversity Discovery and Information System (IndoBioSys).

PubMed

Schmidt, Olga; Hausmann, Axel; Cancian de Araujo, Bruno; Sutrisno, Hari; Peggie, Djunijanti; Schmidt, Stefan

2017-01-01

Here we present a general collecting and preparation protocol for DNA barcoding of Lepidoptera as part of large-scale rapid biodiversity assessment projects, and a comparison with alternative preserving and vouchering methods. About 98% of the sequenced specimens processed using the present collecting and preparation protocol yielded sequences with more than 500 base pairs. The study is based on the first outcomes of the Indonesian Biodiversity Discovery and Information System (IndoBioSys). IndoBioSys is a German-Indonesian research project that is conducted by the Museum für Naturkunde in Berlin and the Zoologische Staatssammlung München, in close cooperation with the Research Center for Biology - Indonesian Institute of Sciences (RCB-LIPI, Bogor).

Research study for gel precursors as glass and ceramic starting materials for space processing applications research

NASA Technical Reports Server (NTRS)

Downs, R. L.; Miller, W. J.

1983-01-01

The development of techniques for the preparation of glass and ceramic starting materials that will result in homogeneous glasses or ceramic products when melted and cooled in a containerless environment is described. Metal-organic starting materials were used to make compounds or mixtures which were then decomposed by hydrolysis reactions to the corresponding oxides. The sodium tungstate system was chosen as a model for a glass with a relatively low melting temperature. The alkoxide tungstates also have interesting optical properties. For all the compositions studied, comparison samples were prepared from inorganic starting materials and submitted to the same analyses.

Veg-03 Pillows Preparation for Flight

NASA Image and Video Library

2016-03-21

Inside a laboratory in the Space Station Processing Facility at NASA’s Kennedy Space Center in Florida, research scientists prepare the plant pillows for the Veg-03 experiment that will be delivered to the International Space Station aboard the eighth SpaceX Dragon commercial resupply mission. Matt Romeyn, a NASA pathways intern, measures out the calcined clay, or space dirt, for one of the plant pillows. The Veg-03 plant pillows will contain ‘Tokyo Bekana’ cabbage seeds and lettuce seeds for NASA’s third Veggie plant growth system experiment. The experiment will continue NASA’s deep space plant growth research to benefit the Earth and the agency’s journey to Mars.

Veg-03 Pillows Preparation for Flight

NASA Image and Video Library

2016-03-21

Inside a laboratory in the Space Station Processing Facility at NASA’s Kennedy Space Center in Florida, plant pillows for the Veg-03 experiment are prepared for delivery to the International Space Station aboard the eighth SpaceX Dragon commercial resupply mission. Dr. Mathew Mickens, a post-doctoral researcher, inserts a bonding agent into one of the Veg-03 plant pillows. The Veg-03 plant pillows will contain ‘Tokyo Bekana’ cabbage seeds and lettuce seeds for NASA’s third Veggie plant growth system experiment. The experiment will continue NASA’s deep space plant growth research to benefit the Earth and the agency’s journey to Mars.

Development, Characterization and Evaluation of Solid Lipid Nanoparticles as a potential Anticancer Drug Delivery System

NASA Astrophysics Data System (ADS)

Patel, Meghavi

Solid lipid nanoparticles (SLNs) consist of spherical solid lipid particles in the nanometer size range, which are dispersed in water or in an aqueous surfactant solution. SLN technology represents a promising new approach to deliver hydrophilic as well as lipophilic drugs. The commercialization of SLN technology remains limited despite numerous efforts from researchers. The purpose of this research was to advance SLN preparation methodology by investigating the feasibility of preparing glyceryl monostearate (GMS) nanoparticles by using three preparation methods namely microemulsion technique, magnetic stirring technique and temperature modulated solidification technique of which the latter two were developed in our laboratory. An anticancer drug 5-fluorouracil was incorporated in the SLNs prepared via the temperature modulated solidification process. Optimization of the magnetic stirring process was performed to evaluate how the physicochemical properties of the SLN was influenced by systematically varying process parameters including concentration of the lipid, concentration of the surfactant, type of surfactant, time of stirring and temperature of storage. The results demonstrated 1:2 GMS to tween 80 ratio, 150 ml dispersion medium and 45 min stirring at 4000 RPM speed provided an optimum formulation via the temperature modulated solidification process. SLN dispersions were lyophilized to stabilize the solid lipid nanoparticles and the lyophilizates exhibited good redispersibility. The SLNs were characterized by particle size analysis via dynamic light scattering (DLS), zeta potential, transmission electron microscopy (TEM), differential scanning calorimetry (DSC), drug encapsulation efficiency and in vitro drug release studies. Particle size of SLN dispersion prepared via the three preparation techniques was approximately 66 nm and that of redispersed lyophilizates was below 500 nm. TEM images showed spherical to oval particles that were less dense in the core with a well-defined shell and the particle size was in agreement with the particle size analysis data obtained by DLS. DSC thermograms of the lyophilized SLNs indicate a reduction in the crystallinity order of GMS particles. The drug encapsulation efficiency was found to be approximately 30%. In vitro drug release studies from redispersed lyophilized SLNs showed that 17 % of the encapsulated drug was released within 2 h. The SLNs prepared in our lab demonstrated characteristics that can potentially be utilized in an anticancer drug delivery system. Future in vitro cell culture and in vivo animal model studies will delineate compatibility and utility of these formulations in biological systems.

Wallas' Four-Stage Model of the Creative Process: More than Meets the Eye?

ERIC Educational Resources Information Center

Sadler-Smith, Eugene

2015-01-01

Based on a detailed reading of Graham Wallas' "Art of Thought" (1926) it is argued that his four-stage model of the creative process (Preparation, Incubation, Illumination, Verification), in spite of holding sway as a conceptual anchor for many creativity researchers, does not reflect accurately Wallas' full account of the creative…

Building Bridges to Connect the Disconnects: An Analysis of Business Program Design Processes

ERIC Educational Resources Information Center

Fleming, Debra L.

2008-01-01

The purpose of this study is to analyze current trends of design processes and redesign efforts for business programs. A review of the literature suggests business schools are not preparing graduates of their programs with the necessary knowledge, skills and dispositions as deemed appropriate to succeed in the world of work. Some research studies…

Achievement Test Preparation: A Year-Long Goal, Not a Last-Minute Thought.

ERIC Educational Resources Information Center

Matter, M. Kevin; Ligon, Glynn

Yearly administrations of a standardized achievement test are a part of the educational process in many school districts in the United States. The Systemwide Testing Program in the Austin Independent School District Office of Research and Evaluation has gradually developed a process and support materials whereby the test administrations are a tool…

Preparing Stylistically Challenging Contemporary Classical Repertoire for Performance: Interpreting "Kumari"

ERIC Educational Resources Information Center

Viney, Liam; Blom, Diana

2015-01-01

Research involving the learning processes of musicians seldom examines specific pieces of music, and limited attention has been devoted to the earliest stages of learning a stylistically challenging or new piece of 20th-/21st-century art music. This article describes the processes by which two pianists (the authors) learned Ross Edwards's…

The role of mothers' and adolescents' perceptions of ethnic-racial socialization in shaping ethnic-racial identity among early adolescent boys and girls.

PubMed

Hughes, Diane; Hagelskamp, Carolin; Way, Niobe; Foust, Monica D

2009-05-01

The current study examined relationships between adolescents' and mothers' reports of ethnic-racial socialization and adolescents' ethnic-racial identity. The sample included 170 sixth graders (49% boys, 51% girls) and their mothers, all of whom identified as Black, Puerto Rican, Dominican, or Chinese. Two dimensions of ethnic-racial socialization (cultural socialization and preparation for bias) were evaluated alongside three dimensions of ethnic-racial identity (exploration, affirmation and belonging, and behavioral engagement). Mothers' reports of their cultural socialization predicted adolescents' reports, but only adolescents' reports predicted adolescents' ethnic-racial identity processes. Mothers' reports of preparation for bias predicted boys' but not girls' reports of preparation for bias. Again, only adolescents' reports of preparation for bias predicted their ethnic-racial identity. Thus, several gender differences in relationships emerged, with mothers' and adolescents' perceptions of cultural socialization, in particular, playing a more important role in girls' than in boys' identity processes. We discuss the implications of these findings for future research.

KSC-05PD-0370

NASA Technical Reports Server (NTRS)

2005-01-01

KENNEDY SPACE CENTER, FLA. In the Space Station Processing Facility, workers prepare to attach the Human Research Facility-2 (HRF-2) science rack onto the Rack Insertion Device. HRF-2 will be installed into the Multi-Purpose Logistics Module Raffaello (at left) for flight on Space Shuttle Discoverys Return to Flight mission, STS-114. The HRF-2 will deliver additional biomedical instrumentation and research capability to the International Space Station. HRF-1, installed on the U.S. Lab since May 2001, contains an ultrasound unit and gas analyzer. Both racks provide structural, power, thermal, command and data handling, and communication and tracking interfaces between the HRF biomedical instrumentation and the U.S. Laboratory, Destiny. NASA Kennedy Space Center and their prime contractor responsible for ISS element processing, The Boeing Company, prepared the rack for installation. The HRF Project is managed by NASA Johnson Space Center and implemented through contract with Lockheed Martin, Houston, Texas.

[Pinealon and Cortexin influence on behavior and neurochemical processes in 18-month aged rats within hypoxia and hypothermia].

PubMed

Mendzheritsky, A M; Karantysh, G V; Ryzhak, G A; Prokofiev, V N

The research of Cortexin and Pinealon within two models of stress, acute hypobaric hypoxia and mild hypothermia, within 18-month aged rats has been held. The peculiarities of peptide preparations' influence on behavior and neurochemical indeces have been identified. Cortexin shows a more pronounced effect on free radical processes and caspase 3 activity in brain than Pinealon. Both preparations forward an accumulation of adrenergic mediator within rats' brains in the model of acute hypobaric hypoxia, as well as serotonin within cerebrum cortex in the model of mild hypothermia, which may underlie their geroprotective effects.

Planning, Preparation, and Transport of the High-Enriched Uranium Spent Nuclear Fuel from the Czech Republic to the Russian Federation

DOE Office of Scientific and Technical Information (OSTI.GOV)

M. J. Tyacke; I. Bolshinsky; Frantisek Svitak

The United States, Russian Federation, and the International Atomic Energy Agency have been working together on a program called the Russian Research Reactor Fuel Return (RRRFR) Program, which is part of the Global Threat Reduction Initiative. The purpose of this program is to return Soviet or Russian-supplied high-enriched uranium (HEU) fuel, currently stored at Russian-designed research reactors throughout the world, to Russia. In February 2003, the RRRFR Program began discussions with the Nuclear Research Institute (NRI) in Rež, Czech Republic, about returning their HEU spent nuclear fuel to the Russian Federation for reprocessing. In March 2005, the U.S. Department ofmore » Energy signed a contract with NRI to perform all activities needed for transporting their HEU spent nuclear fuel to Russia. After 2 years of intense planning, preparations, and coordination at NRI and with three other countries, numerous organizations and agencies, and a Russian facility, this shipment is scheduled for completion before the end of 2007. This paper will provide a summary of activities completed for making this international shipment. This paper contains an introduction and background of the RRRFR Program and the NRI shipment project. It summarizes activities completed in preparation for the shipment, including facility preparations at NRI in Rež and FSUE “Mayak” in Ozyorsk, Russia; a new transportation cask system; regulatory approvals; transportation planning and preparation in the Czech Republic, Slovakia, Ukraine, and the Russian Federation though completion of the Unified Project and Special Ecological Programs. The paper also describes fuel loading and cask preparations at NRI and final preparations/approvals for transporting the shipment across the Czech Republic, Slovakia, Ukraine, and the Russian Federation to FSUE Mayak where the HEU spent nuclear fuel will be processed, the uranium will be downblended and made into low-enriched uranium fuel for commercial reactor use, and the high-level waste from the processing will be stabilized and stored for less than 20 years before being sent back to the Czech Republic for final disposition. Finally, the paper contains a section for the summary and conclusions.« less

Managing Distributed Innovation Processes in Virtual Organizations by Applying the Collaborative Network Relationship Analysis

NASA Astrophysics Data System (ADS)

Eschenbächer, Jens; Seifert, Marcus; Thoben, Klaus-Dieter

Distributed innovation processes are considered as a new option to handle both the complexity and the speed in which new products and services need to be prepared. Indeed most research on innovation processes was focused on multinational companies with an intra-organisational perspective. The phenomena of innovation processes in networks - with an inter-organisational perspective - have been almost neglected. Collaborative networks present a perfect playground for such distributed innovation processes whereas the authors highlight in specific Virtual Organisation because of their dynamic behaviour. Research activities supporting distributed innovation processes in VO are rather new so that little knowledge about the management of such research is available. With the presentation of the collaborative network relationship analysis this gap will be addressed. It will be shown that a qualitative planning of collaboration intensities can support real business cases by proving knowledge and planning data.

Effects of atamp-charging coke making on strength and high temperature thermal properties of coke.

PubMed

Zhang, Yaru; Bai, Jinfeng; Xu, Jun; Zhong, Xiangyun; Zhao, Zhenning; Liu, Hongchun

2013-12-01

The stamp-charging coke making process has some advantages of improving the operation environment, decreasing fugitive emission, higher gas collection efficiency as well as less environmental pollution. This article describes the different structure strength and high temperature thermal properties of 4 different types of coke manufactured using a conventional coking process and the stamp-charging coke making process. The 4 kinds of cokes were prepared from the mixture of five feed coals blended by the petrography blending method. The results showed that the structure strength indices of coke prepared using the stamp-charging coke method increase sharply. In contrast with conventional coking process, the stamp-charging process improved the coke strength after reaction but had little impact on the coke reactivity index. Copyright © 2013 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

Biodegradability of poly(butylene succinate-co-butylene adipate) (PBSA) controlled by temperature during the dried-gel process

NASA Astrophysics Data System (ADS)

Yamazaki, Hana; Maeda, Tomoki; Hotta, Atsushi

Currently there is a growing interest in biodegradable plastics that can be readily degraded into H2O and CO2. Among them, poly(butylene succinate-co-butylene adipate)(PBSA) is one of the mechanically attractive materials that can be biodegraded by surrounding water molecules and microorganisms after the disposal of the plastics. In order to expand the use of PBSA, the proper and effective control of the biodegradability of PBSA should be realized. In this work, the dried-gel process of the PBSA was carefully studied considering the temperature of the process. Three different types of dried PBSA gels were prepared at three different gel-process temperatures. From the biodegradability testing by immersing the PBSA samples in NaOH aq., it was found that the percentage of the weight loss of the PBSA was increased, indicating that the biodegradability was enhanced as the gel preparation temperature became lower. In fact, smaller spherocrystals were observed in PBSA dried at cooler temperature, studied by the scanning electron microscopy (SEM). It was therefore concluded that the microstructures of PBSA could be well controlled by changing the gel preparation temperatures for the precise control of the biodegradability of PBSA. This work was supported by a Grant-in-Aid for Scientific Research (A) (No. 15H02298 to A.H.) and a Grant-in-Aid for Research Activity Start-up (No.15H06586 to T.M.) from JSPS: KAKENHI\\x9D.

[Discussion on efficacy evaluation thought and method for innovation medicine of Chinese herbal compound formula based on clinical application characteristics].

PubMed

Sun, Jian-Ning; Sun, Wen-Yan; Dong, Shi-Fen

2017-03-01

The Chinese herbal compound formula preparation was made based on theory of Chinese medicine, which was confirmed by long period clinical application, and with multi-compound and multi-target characteristics. During the exploitation process of innovation medicine of Chinese herbal compound formula, selecting and speeding up the research development of drugs with clinical value shall be paid more attention, and as request of rules involved in new drug research and development, the whole process management should be carried out, including project evaluation, manufacturing process determination, establishment of quality control standards, evaluation for pharmacological and toxic effect, as well as new drug application process. This reviews was aimed to give some proposals for pharmacodynamics research methods involved in exploration of Chinese herbal compound formula preparation, including： ①the endpoint criteria should meet the clinical attribution of new drugs; ②the pre-clinical pharmacodynamics evaluation should be carried on appropriate animal models according to the characteristics of diagnosis and therapy of Chinese medicine and observation indexes; ③during the innovation of drug for infants and children, information on drug action conforming to physiological characteristics of infants and children should be supplied, and the pharmacodynamics and toxicology research shall be conducted in immature rats according to the body weight of children. In a summary, the clinical application characteristics are the important criteria for evaluation of pharmacological effect of innovation medicine of Chinese herbal compound formula. Copyright© by the Chinese Pharmaceutical Association.

Cargo container inspection test program at ARPA's Nonintrusive Inspection Technology Testbed

NASA Astrophysics Data System (ADS)

Volberding, Roy W.; Khan, Siraj M.

1994-10-01

An x-ray-based cargo inspection system test program is being conducted at the Advanced Research Project Agency (ARPA)-sponsored Nonintrusive Inspection Technology Testbed (NITT) located in the Port of Tacoma, Washington. The test program seeks to determine the performance that can be expected from a dual, high-energy x-ray cargo inspection system when inspecting ISO cargo containers. This paper describes an intensive, three-month, system test involving two independent test groups, one representing the criminal smuggling element and the other representing the law enforcement community. The first group, the `Red Team', prepares ISO containers for inspection at an off-site facility. An algorithm randomly selects and indicates the positions and preparation of cargoes within a container. The prepared container is dispatched to the NITT for inspection by the `Blue Team'. After in-gate processing, it is queued for examination. The Blue Team inspects the container and decides whether or not to pass the container. The shipment undergoes out-gate processing and returns to the Red Team. The results of the inspection are recorded for subsequent analysis. The test process, including its governing protocol, the cargoes, container preparation, the examination and results available at the time of submission are presented.

Processing and optimization of functional ceramic coatings and inorganic nanomaterials

NASA Astrophysics Data System (ADS)

Nyutu, Edward Kennedy G.

Processing of functional inorganic materials including zero (0-D) dimensional (e.g. nanoparticles), 1-D (nanorods, nanofibers), and 2-D (films/coating) structures is of fundamental and technological interest. This research will have two major sections. The first part of section one focuses on the deposition of silicon dioxide onto a pre-deposited molybdenum disilicide coating on molybdenum substrates for both high (>1000 °C) and moderate (500-600 °C) temperature oxidation protection. Chemical vapor deposition (CVD/MOCVD) techniques will be utilized to deposit the metal suicide and oxide coatings. The focus of this study will be to establish optimum deposition conditions and evaluate the metal oxide coating as oxidation - thermal barriers for Mo substrates under both isothermal (static) and cyclic oxidation conditions. The second part of this section will involve a systematic evaluation of a boron nitride (BN) interface coating prepared by chemical vapor deposition. Ceramic matrix composites (CMCs) are prospective candidates for high (>1000 °C) temperature applications and fiber- matrix interfaces are the dominant design parameters in ceramic matrix composites (CMCs). An important goal of the study is to determine a set of process parameters, which would define a boron nitride (BN) interface coating by a chemical vapor deposition (CVD) process with respect to coating. In the first part of the second section, we will investigate a new approach to synthesize ultrafine metal oxides that combines microwave heating and an in-situ ultrasonic mixing of two or more liquid precursors with a tubular flow reactor. Different metal oxides such as nickel ferrite and zinc aluminate spinels will be studied. The synthesis of metal oxides were investigated in order to study the effects of the nozzle and microwave (INM process) on the purity, composition, and particle size of the resulting powders. The second part of this research section involves a study of microwave frequency effects on the synthesis of nanocrystalline tetragonal barium titanate. The effects of microwave frequency (fixed and variable), microwave bandwidths sweep time, and aging time on the microstructure, particle sizes, phase purity, surface areas, and porosities of the as-prepared BaTiO3 were systematically investigated. The final part of the research involves a new rapid and facile synthetic route to prepare size-tunable, ultranarrow, high surface area OMS-2 nanomaterials via open-vessel microwave-assisted refluxing preparations without employing templates or surfactants. The particle size control is achieved by varying the concentration or type of non-aqueous co-solvent. The structural, textural, and catalytic application properties of the prepared nanomaterials are investigated.

Student’s thinking process in solving word problems in geometry

NASA Astrophysics Data System (ADS)

Khasanah, V. N.; Usodo, B.; Subanti, S.

2018-05-01

This research aims to find out the thinking process of seventh grade of Junior High School in solve word problem solving of geometry. This research was descriptive qualitative research. The subject of the research was selected based on sex and differences in mathematical ability. Data collection was done based on student’s work test, interview, and observation. The result of the research showed that there was no difference of thinking process between male and female with high mathematical ability, and there were differences of thinking process between male and female with moderate and low mathematical ability. Also, it was found that male with moderate mathematical ability took a long time in the step of making problem solving plans. While female with moderate mathematical ability took a long time in the step of understanding the problems. The importance of knowing the thinking process of students in solving word problem solving were that the teacher knows the difficulties faced by students and to minimize the occurrence of the same error in problem solving. Teacher could prepare the right learning strategies which more appropriate with student’s thinking process.

COMPOSITES FROM RECYCLED WOOD AND PLASTICS

EPA Science Inventory

The ultimate goal of this research was to develop technology to convert recycled wood fiber and plastics into durable products that are recyclable and otherwise environmentally friendly. Two processing technologies were used to prepare wood-plastic composites: air-laying and melt...

COMPOSITES FROM RECYCLED WOOD AND PLASTICS

EPA Science Inventory

The ultimate goal of this research was to develop technology to convert recycled wood fiber and plastics into durable products that are recyclable and otherwise environmentally friendly. wo processing technologies were used to prepare wood-plastic composites: air-laying and melt-...

Raising the Bar: A Qualitative Study of Adult Learning Theory and Its Role on the Effectiveness of Law School Education in Preparing New Graduates to Begin the Practice of Law

ERIC Educational Resources Information Center

Taylor, Bryan Finley

2010-01-01

This qualitative research study examined the effectiveness of law school education in preparing new attorneys to practice law from the view point of novice criminal law attorneys. A debate has existed over the past few decades between legal academia and the practicing bar as to what are the most effective learning processes and strategies of…

Controlling the biodegradability of poly(butylene succinate-co-butylene adipate) (PBSA) by solvents used in the dried-gel process

NASA Astrophysics Data System (ADS)

Yamazaki, Hana; Kamitabira, Saya; Maeda, Tomoki; Hotta, Atsushi

Considering an environmentally friendly material, poly(butylene succinate-co-butylene adipate)(PBSA) is one of the attractive biodegradable plastics that can be eventually degraded into H2O and CO2 by neighboring water molecules and microorganisms after the disposal. In order to expand the application of PBSA, the precise control of the biodegradability of PBSA is necessary. In this study, the dried-gel process was introduced to control the biodegradability of PBSA. The dried PBSA gels were prepared by using three different solvents (toluene, cyclohexanone, and o-dichlorobenzene). The scanning electron microscopy (SEM) micrographs revealed that the PBSA prepared by toluene had smaller spherocrystals than the other PBSA dried-gels prepared by cyclohexanone or o-dichlorobenzene. The biodegradability testing by immersing the three types of PBSA in NaOH aq. showed that the percentage of the weight loss of the PBSA produced by toluene was the highest. The results indicated that the microstructures of PBSA could be controlled by changing solvents during the gel preparations, and that the biodegradability of PBSA could therefore be efficiently modified by changing solvents. This work was supported by a Grant-in-Aid for Scientific Research (A) (No. 15H02298 to A.H.) and a Grant-in-Aid for Research Activity Start-up (No.15H06586 to T.M.) from JSPS: KAKENHI\\x9D.

Clinical providers' experiences with returning results from genomic sequencing: an interview study.

PubMed

Wynn, Julia; Lewis, Katie; Amendola, Laura M; Bernhardt, Barbara A; Biswas, Sawona; Joshi, Manasi; McMullen, Carmit; Scollon, Sarah

2018-05-08

Current medical practice includes the application of genomic sequencing (GS) in clinical and research settings. Despite expanded use of this technology, the process of disclosure of genomic results to patients and research participants has not been thoroughly examined and there are no established best practices. We conducted semi-structured interviews with 21 genetic and non-genetic clinicians returning results of GS as part of the NIH funded Clinical Sequencing Exploratory Research (CSER) Consortium projects. Interviews focused on the logistics of sessions, participant/patient reactions and factors influencing them, how the sessions changed with experience, and resources and training recommended to return genomic results. The length of preparation and disclosure sessions varied depending on the type and number of results and their implications. Internal and external databases, online resources and result review meetings were used to prepare. Respondents reported that participants' reactions were variable and ranged from enthusiasm and relief to confusion and disappointment. Factors influencing reactions were types of results, expectations and health status. A recurrent challenge was managing inflated expectations about GS. Other challenges included returning multiple, unanticipated and/or uncertain results and navigating a rare diagnosis. Methods to address these challenges included traditional genetic counseling techniques and modifying practice over time in order to provide anticipatory guidance and modulate expectations. Respondents made recommendations to improve access to genomic resources and genetic referrals to prepare future providers as the uptake of GS increases in both genetic and non-genetic settings. These findings indicate that returning genomic results is similar to return of results in traditional genetic testing but is magnified by the additional complexity and potential uncertainty of the results. Managing patient expectations, initially identified in studies of informed consent, remains an ongoing challenge and highlights the need to address this issue throughout the testing process. The results of this study will help to guide future providers in the disclosure of genomic results and highlight educational needs and resources necessary to prepare providers. Future research on the patient experience, understanding and follow-up of recommendations is needed to more fully understand the disclosure process.

Reading in NZ Schools: A Survey of Our Theory and Practice. Set Research Information for Teachers, Number Two, Item 2.

ERIC Educational Resources Information Center

Penton, John

Designed to provide information about reading in New Zealand, this report offers an overview of theory and practice in that area. Among the topics discussed are: the current concern about reading standards; developmental reading; effective methods of reading instruction; research into the nature of the reading process; preparation of teachers of…

A Review of Photocatalysts Prepared by Sol-Gel Method for VOCs Removal

PubMed Central

Tseng, Ting Ke; Lin, Yi Shing; Chen, Yi Ju; Chu, Hsin

2010-01-01

The sol-gel process is a wet-chemical technique (chemical solution deposition), which has been widely used in the fields of materials science, ceramic engineering, and especially in the preparation of photocatalysts. Volatile organic compounds (VOCs) are prevalent components of indoor air pollution. Among the approaches to remove VOCs from indoor air, photocatalytic oxidation (PCO) is regarded as a promising method. This paper is a review of the status of research on the sol-gel method for photocatalyst preparation and for the PCO purification of VOCs. The review and discussion will focus on the preparation and coating of various photocatalysts, operational parameters, and will provide an overview of general PCO models described in the literature. PMID:20640156

Data assimilation and model evaluation experiment datasets

NASA Technical Reports Server (NTRS)

Lai, Chung-Cheng A.; Qian, Wen; Glenn, Scott M.

1994-01-01

The Institute for Naval Oceanography, in cooperation with Naval Research Laboratories and universities, executed the Data Assimilation and Model Evaluation Experiment (DAMEE) for the Gulf Stream region during fiscal years 1991-1993. Enormous effort has gone into the preparation of several high-quality and consistent datasets for model initialization and verification. This paper describes the preparation process, the temporal and spatial scopes, the contents, the structure, etc., of these datasets. The goal of DAMEE and the need of data for the four phases of experiment are briefly stated. The preparation of DAMEE datasets consisted of a series of processes: (1) collection of observational data; (2) analysis and interpretation; (3) interpolation using the Optimum Thermal Interpolation System package; (4) quality control and re-analysis; and (5) data archiving and software documentation. The data products from these processes included a time series of 3D fields of temperature and salinity, 2D fields of surface dynamic height and mixed-layer depth, analysis of the Gulf Stream and rings system, and bathythermograph profiles. To date, these are the most detailed and high-quality data for mesoscale ocean modeling, data assimilation, and forecasting research. Feedback from ocean modeling groups who tested this data was incorporated into its refinement. Suggestions for DAMEE data usages include (1) ocean modeling and data assimilation studies, (2) diagnosis and theoretical studies, and (3) comparisons with locally detailed observations.

Needed Research on Interpersonal Behavior Processes. A Special Report of the USOE-Sponsored Grant Study: Critical Appraisal of Research in the Personality-Emotions-Motivation Domain.

ERIC Educational Resources Information Center

Byrne, Donn; And Others

The task group report presented in this publication is one of a series prepared by eminent psychologists who have served as consultants in the U.S.O.E.-sponsored grant study to conduct a Critical Appraisal of the Personality-Emotions-Motivation-Domain. In order to achieve the goal of identifying important problems and areas for new research and…

Prioritized List of Research Needs to support MRWFD Case Study Flowsheet Advancement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Law, Jack Douglas; Soelberg, Nicholas Ray

In FY-13, a case study evaluation was performed of full recycle technologies for both the processing of light-water reactor (LWR) used nuclear fuels as well as fast reactor (FR) fuel in the full recycle option. This effort focused on the identification of the case study processes and the initial preparation of material balance flowsheets for the identified technologies. In identifying the case study flowsheets, it was decided that two cases would be developed: one which identifies the flowsheet as currently developed and another near-term target flowsheet which identifies the flowsheet as envisioned within two years, pending the results of ongoingmore » research. The case study focus is on homogeneous aqueous recycle of the U/TRU resulting from the processing of LWR fuel as feed for metal fuel fabrication. The metal fuel is utilized in a sodium-cooled fast reactor, and the used fast reactor fuel is processed using electrochemical separations. The recovered U/TRU from electrochemical separations is recycled to fuel fabrication and the fast reactor. Waste streams from the aqueous and electrochemical processing are treated and prepared for disposition. Off-gas from the separations and waste processing are also treated. As part of the FY-13 effort, preliminary process unknowns and research needs to advance the near-term target flowsheets were identified. In FY-14, these research needs were updated, expanded and prioritized. This report again updates the prioritized list of research needs based upon results to date in FY-15. The research needs are listed for each of the main portions of the flowsheet: 1) Aqueous headend, 2) Headend tritium pretreatment off-gas, 3) Aqueous U/Pu/Np recovery, 4) Aqueous TRU product solidification, 5) Aqueous actinide/lanthanide separation, 6) Aqueous off-gas treatment, 7) Aqueous HLW management, 8) Treatment of aqueous process wastes, 9) E-chem actinide separations, 10) E-chem off-gas, 11) E-chem HLW management. The identified research needs were prioritized within each of these areas. No effort was made to perform an overall prioritization. This information will be used by the MRWFD Campaign leadership in research planning for FY-16. Additionally, this information will be incorporated into the next version of the Case Study Report scheduled to be issued September 2015.« less

Improving animal research facility operations through the application of lean principles.

PubMed

Khan, Nabeel; Umrysh, Brian M

2008-06-01

Animal research is a vital component of US research and well-functioning animal research facilities are critical both to the research itself and to the housing and feeding of the animals. The Office of Animal Care (OAC) at Seattle Children's Hospital Research Institute realized it had to improve the efficiency and safety of its animal research facility (ARF) to prepare for expansion and to advance the Institute's mission. The main areas for improvement concerned excessive turnaround time to process animal housing and feeding equipment; the movement and flow of equipment and inventory; and personnel safety. To address these problems, management held two process improvement workshops to educate employees about lean principles. In this article we discuss the application of these principles and corresponding methods to advance Children's Research Institute's mission of preventing, treating, and eliminating childhood diseases.

Molecular and Metabolic Mechanisms of Carbon Sequestration in Marine Thrombolites

NASA Technical Reports Server (NTRS)

Mobberley, Jennifer

2013-01-01

The overall goal of my dissertation project has been to examine the molecular processes underlying carbon sequestration in lithifying microbial ecosystems, known as thrombolitic mats, and assess their feasibility for use in bioregenerative life support systems. The results of my research and education efforts funded by the Graduate Student Researchers Program can be summarized in four peer-reviewed research publication, one educational publication, two papers in preparation, and six research presentations at local and national science meetings (see below for specific details).

Space processing applications payload equipment study. Volume 2A: Experiment requirements

NASA Technical Reports Server (NTRS)

Smith, A. G.; Anderson, W. T., Jr.

1974-01-01

An analysis of the space processing applications payload equipment was conducted. The primary objective was to perform a review and an update of the space processing activity research equipment requirements and specifications that were derived in the first study. The analysis is based on the six major experimental classes of: (1) biological applications, (2) chemical processes in fluids, (3) crystal growth, (4) glass technology, (5) metallurgical processes, and (6) physical processes in fluids. Tables of data are prepared to show the functional requirements for the areas of investigation.

The role of inspiration in scientific scholarship and discovery: views of theistic scientists.

PubMed

O'Grady, Kari A; Richards, P Scott

2011-01-01

This qualitative research study examined the ways those who identify themselves as theistic scientists and scholars experience inspiration, as defined as divine guidance or influence, in their scientific scholarship and discovery. It also explored participants' beliefs about how scientists and scholars can seek and prepare to receive inspiration in their work. Open-ended surveys of 450 participants from the behavioral and natural sciences and from a variety of religious backgrounds were analyzed for content themes in the areas of experiences with inspiration, preparing to receive inspiration, and further thoughts on inspiration in science. The themes extracted indicated that these scientists and scholars have experienced inspiration throughout all stages of the research process. They also believe that certain practices and virtues, such as openness to inspiration and nurturing a relationship with God, can help scientists and scholars be more prepared to receive inspiration in their work. Copyright © 2011 Elsevier Inc. All rights reserved.

A streamlined collecting and preparation protocol for DNA barcoding of Lepidoptera as part of large-scale rapid biodiversity assessment projects, exemplified by the Indonesian Biodiversity Discovery and Information System (IndoBioSys)

PubMed Central

Hausmann, Axel; Cancian de Araujo, Bruno; Sutrisno, Hari; Peggie, Djunijanti; Schmidt, Stefan

2017-01-01

Abstract Here we present a general collecting and preparation protocol for DNA barcoding of Lepidoptera as part of large-scale rapid biodiversity assessment projects, and a comparison with alternative preserving and vouchering methods. About 98% of the sequenced specimens processed using the present collecting and preparation protocol yielded sequences with more than 500 base pairs. The study is based on the first outcomes of the Indonesian Biodiversity Discovery and Information System (IndoBioSys). IndoBioSys is a German-Indonesian research project that is conducted by the Museum für Naturkunde in Berlin and the Zoologische Staatssammlung München, in close cooperation with the Research Center for Biology – Indonesian Institute of Sciences (RCB-LIPI, Bogor). PMID:29134041

The five deadly sins of science publishing

PubMed Central

Tracz, Vitek

2015-01-01

Science cannot progress without scientists reporting their findings. And yet researchers have given control of this central pillar of the scientific process to science publishers, who are in the business of serving the interests of their journals; these are not always the same as the interests of science. This editorial describes the problems with the process of preparing and publishing research findings, and with judging their veracity and significance, and then explains how we at Faculty of 1000 are starting to tackle the ‘deadly sins’ of science publishing. PMID:26097694

Functional Advertising.

ERIC Educational Resources Information Center

McCann, Guy

With minor modifications, an advertising fundamentals course can stimulate creative development and provide career direction while it presents the basic elements of advertising. A group presentation introduces students to research and familiarizes them with the conflict resolution process useful in preparing advertising. A group project arranges…

Low pressure hand made PVD system for high crystalline metal thin film preparation in micro-nanometer scale

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosikhin, Ahmad, E-mail: a.rosikhin86@yahoo.co.id; Hidayat, Aulia Fikri; Marimpul, Rinaldo

High crystalline metal thin film preparation in application both for catalyst substrate or electrode in any electronic devices always to be considered in material functional material research and development. As a substrate catalyst, this metal take a role as guidance for material growth in order to resulted in proper surface structure although at the end it will be removed via etching process. Meanwhile as electrodes, it will dragging charges to be collected inside. This brief discussion will elaborate general fundamental principle of physical vapor deposition (PVD) system for metal thin film preparation in micro-nanometer scale. The influence of thermodynamic parametersmore » and metal characteristic such as melting point and particle size will be elucidated. Physical description of deposition process in the chamber can be simplified by schematic evaporation phenomena which is supported by experimental measurement such as SEM and XRD.« less

New technology for recyclingmaterials from oily cold rollingmill sludge

NASA Astrophysics Data System (ADS)

Liu, Bo; Zhang, Shen-gen; Tian, Jian-jun; Pan, De-an; Meng, Ling; Liu, Yang

2013-12-01

Oily cold rolling mill (CRM) sludge is one of metallurgical industry solid wastes. The recycle of these wastes can not only protect the environment but also permit their reutilization. In this research, a new process of "hydrometallurgical treatment + hydrothermal synthesis" was investigated for the combined recovery of iron and organic materials from oily CRM sludge. Hydrometallurgical treatment, mainly including acid leaching, centrifugal separation, neutralization reaction, oxidizing, and preparation of hydrothermal reaction precursor, was first utilized for processing the sludge. Then, micaceous iron oxide (MIO) pigment powders were prepared through hydrothermal reaction of the obtained precursor in alkaline media. The separated organic materials can be used for fuel or chemical feedstock. The quality of the prepared MIO pigments is in accordance with the standards of MIO pigments for paints (ISO 10601-2007). This clean, effective, and economical technology offers a new way to recycle oily CRM sludge.

P/M Processing of Rare Earth Modified High Strength Steels.

DTIC Science & Technology

1980-12-01

AA094 165 TRW INC CLEVELAND OH MATERIALS TECHNOLOGY F 6 P/N PROCESSING OF RARE EARTH MODIFIED HIGH STRENGTH STEELS DEC So A A SHEXM(ER NOOŕT76-C...LEVEL’ (7 PIM PROCESSING OF RARE EARTH MODIFIED HIGH STRENGTH STEELS By A. A. SHEINKER 00 TECHNICAL REPORT Prepared for Office of Naval Research...Processing of Rare Earth Modified High 1 Technical -’ 3t eC"Strength Steels * 1dc4,093Se~ 9PEFRIGOGNZTONAEADADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK

Developing a computer game to prepare children for surgery.

PubMed

Rassin, Michal; Gutman, Yaira; Silner, Dina

2004-12-01

Computer games are a major part of the culture of children and teenagers in many developed countries. Research shows that children of the computer age prefer computer-assisted learning to any other teaching strategy. Health care workers traditionally have used dolls, games, drawings, creative arts, and even videotapes to prepare children for surgery. No studies have been conducted in Israel on using computers to help ailing children in general or to help children preparing for surgery in particular. This article discusses the potential for using computers to educate patients based on a review of the literature and interviews with children and describes the process of computer game development.

Guidelines for Preparation of a Scientific Paper

PubMed Central

Kosiba, Margaret M.

1988-01-01

Even the experienced scientific writer may have difficulty transferring research results to clear, concise, publishable words. To assist the beginning scientific writer, guidelines are proposed that will provide direction for determining a topic, developing protocols, collecting data, using computers for analysis and word processing, incorporating copyediting notations, consulting scientific writing manuals, and developing sound writing habits. Guidelines for writing each section of a research paper are described to help the writer prepare the title page, introduction, materials and methods, results, and discussion sections of the paper, as well as the acknowledgments and references. Procedures for writing the first draft and subsequent revisions include a checklist of structural and stylistic problems and common errors in English usage. PMID:3339646

Veg-03 Pillows Preparation for Flight

NASA Image and Video Library

2016-03-21

Inside a laboratory in the Space Station Processing Facility at NASA’s Kennedy Space Center in Florida, research scientists prepare the plant pillows for the Veg-03 experiment that will be delivered to the International Space Station aboard the eighth SpaceX Dragon commercial resupply mission. Matt Romeyn, a NASA pathways intern, inserts a measured amount of calcined clay, or space dirt, into one of the plant pillows. The Veg-03 plant pillows will contain ‘Tokyo Bekana’ cabbage seeds and lettuce seeds for NASA’s third Veggie plant growth system experiment. The experiment will continue NASA’s deep space plant growth research to benefit the Earth and the agency’s journey to Mars.

Combining contour detection algorithms for the automatic extraction of the preparation line from a dental 3D measurement

NASA Astrophysics Data System (ADS)

Ahlers, Volker; Weigl, Paul; Schachtzabel, Hartmut

2005-04-01

Due to the increasing demand for high-quality ceramic crowns and bridges, the CAD/CAM-based production of dental restorations has been a subject of intensive research during the last fifteen years. A prerequisite for the efficient processing of the 3D measurement of prepared teeth with a minimal amount of user interaction is the automatic determination of the preparation line, which defines the sealing margin between the restoration and the prepared tooth. Current dental CAD/CAM systems mostly require the interactive definition of the preparation line by the user, at least by means of giving a number of start points. Previous approaches to the automatic extraction of the preparation line rely on single contour detection algorithms. In contrast, we use a combination of different contour detection algorithms to find several independent potential preparation lines from a height profile of the measured data. The different algorithms (gradient-based, contour-based, and region-based) show their strengths and weaknesses in different clinical situations. A classifier consisting of three stages (range check, decision tree, support vector machine), which is trained by human experts with real-world data, finally decides which is the correct preparation line. In a test with 101 clinical preparations, a success rate of 92.0% has been achieved. Thus the combination of different contour detection algorithms yields a reliable method for the automatic extraction of the preparation line, which enables the setup of a turn-key dental CAD/CAM process chain with a minimal amount of interactive screen work.

Chemical Compounds and Extraction Methods of "Maollahm".

PubMed

Sadeghpoor, Omid; Dayeni, Manijeh; Razi, Samane

2016-05-01

Maollahm or meat juice, a by-product of meat, is a traditional remedy in Persian medicine. This product was used as a nourishment or treatment substance for sick people. According to the ancient Persian medicine, animal meat has more affinity with the human body and the body easily absorbs its nutrition. Therefore, one could resort to maollahm for patients requiring urgent nourishment to boost and strengthen their body. In this work, different ways of preparing maollahm from poultry, goat, cow, and sheep meat are studied. Most of these methods are based on distillation or barbecue before distillation, as prescribed by traditional medicine books. The reactions, chemical processes, and volatile compounds related to different types of cooked meat are also compared with the outcome of recent research studies. The difference between various types of meat is related to their compounds. Different cooking processes such as barbecuing, roasting, cooking, and boiling have an effect on the taste, smell and the chemical constituents of maollahm. Additionally, the type of meat, animal feed, as well as using or removing the fat during the cooking process, have an effect on the produced volatile compounds. Cooking process and the type of meat have a direct effect on the compounds of maollahm. Possible reactions in the preparation process of maollahm are investigated and presented according to the new research studies.

PCR-DGGE analysis of the microbial communities in three different Chinese "Baiyunbian" liquor fermentation starters.

PubMed

Xiong, Xiaomao; Hu, Yuanliang; Yan, Nanfeng; Huang, Yingna; Peng, Nan; Liang, Yunxiang; Zhao, Shumiao

2014-08-01

A systematic investigation was performed on the bacterial, Bacillus, fungal, and yeast communities of the three types of Daqu (mechanically prepared, manually prepared, and mixed prepared) used in Baiyunbian Company by reconditioning PCR-denaturing gradient gel electrophoresis (PCR-DGGE). The DGGE results showed that the microbes in the three types of Daqu were mainly thermotolerant and thermophilic microbes, and the most dominant bacterial species were Bacillus and Virgibacillus, followed by Lactobacillus and Trichococcus. Furthermore, the dominant fungi were found to be molds, such as Rasamsonia, Penicillium, Aspergillus, and Monascus, and the dominant yeasts were Saccharomyces cerevisiae, Saccharomycopsis fibuligera, Pichia anomala, and Debaryomyces hansenii. In general, the three types of Daqu showed slight differences in microbial communities, and the Shannon indexes (H') of the manually prepared and mechanically prepared Daqu were similar. The results suggest that mechanically prepared Daqu can replace manually prepared Daqu in liquor production, and this research provides useful information for liquor production and process improvement.

Preparation of Zeolite/Zinc Oxide Nanocomposites for toxic metals removal from water

NASA Astrophysics Data System (ADS)

Alswata, Abdullah A.; Ahmad, Mansor Bin; Al-Hada, Naif Mohammed; Kamari, Halimah Mohamed; Hussein, Mohd Zobir Bin; Ibrahim, Nor Azowa

This research work has proposed preparation of Zeolite/Zinc Oxide Nanocomposite (Zeolite/ZnO NCs) by using a co-precipitation method. Then, the prepared Nanocomposite has been tested for adsorption of Lead Pb (II) and Arsenic As (V) from aqueous solution under the room pressure and temperature. After that, the prepared adsorbent has been studied by several techniques. For adsorption process; the effect of the adsorbent masses, contact time, PH and initial metals concentration as well as, the kinetics and isotherm for adsorption process have been investigated. The results revealed that; ZnO nanoparticles (NPs) with average diameter 4.5 nm have successfully been loaded into Zeolite. The optimum parameters for the removal of the toxic metals 93% and 89% of Pb (II) and As (V), respectively, in 100 mg/L aqua solutions were pH4, 0.15 g and 30 min. According to the obtained results; pseudo second-order kinetic and Langmuir isotherm model have higher correlation coefficients and provided a better agreement with the experimental data. The prepared sorbent showed an economical and effective way to remove the heavy toxic metals due to its ambient operation conditions, low- consumption energy and facile regeneration method.

Partial information can be transmitted in an auditory channel: inferences from lateralized readiness potentials.

PubMed

Gong, Diankun; Hu, Jiehui; Yao, Dezhong

2012-04-01

With the two-choice go/no-go paradigm, we investigated whether timbre attribute can be transmitted as partial information from the stimulus identification stage to the response preparation stage in auditory tone processing. We manipulated two attributes of the stimulus: timbre (piano vs. violin) and acoustic intensity (soft vs. loud) to ensure an earlier processing of timbre than intensity. We associated the timbre attribute more with go trials. Results showed that lateralized readiness potentials (LRPs) were consistently elicited in no-go trials. This showed that the timbre attribute had been transmitted to the response preparation stage before the intensity attribute was processed in the stimuli identification stage. Such a result provides evidence for the continuous model and asynchronous discrete coding (ADC) model in information processing. We suggest that partial information can be transmitted in an auditory channel. Copyright © 2011 Society for Psychophysiological Research.

Preparation for microgravity: The role of the microgravity materials science laboratory

NASA Technical Reports Server (NTRS)

Johnston, J. Christopher; Rosenthal, Bruce N.; Meyer, Maryjo B.; Glasgow, Thomas K.

1988-01-01

A laboratory dedicated to ground based materials processing in preparation for space flight was established at the NASA Lewis Research Center. Experiments are performed to delineate the effects of gravity on processes of both scientific and commercial interest. Processes are modeled physically and mathematically. Transport model systems are used where possible to visually track convection, settling, crystal growth, phase separation, agglomeration, vapor transport, diffusive flow, and polymers reactions. The laboratory contains apparatus which functionally duplicates apparatus available for flight experiments and other pieces instrumented specifically to allow process characterization. Materials addressed include metals, alloys, salts, glasses, ceramics, and polymers. The Microgravity Materials Science Laboratory is staffed by engineers and technicians from a variety of disciplines and is open to users from industry and academia as well as the government. Examples will be given of the laboratory apparatus typical experiments and results.

Applications of immobilized catalysts in continuous flow processes.

PubMed

Kirschning, Andreas; Jas, Gerhard

2004-01-01

As part of the dramatic changes associated with automation in pharmaceutical and agrochemical research laboratories, the search for new technologies has become a major topic in the chemical community. Commonly, high-throughput chemistry is still carried out in batches whereas flow-through processes are rather restricted to production processes, despite the fact that the latter concept allows facile automation, reproducibility, safety, and process reliability. Indeed, methods and technologies are missing that allow rapid transfer from the research level to process development. Continuous flow processes are considered as a universal lever to overcome these restrictions and only recently, joint efforts between synthetic and polymer chemists and chemical engineers have resulted in the first continuous flow devices and microreactors which allow rapid preparation of compounds with minimum workup. Importantly, more and more developments combine the use of immobilized reagents and catalysts with the concept of structured continuous flow reactors. Consequently, the present article focuses on this new research field, which is located at the interface of continuous flow processes and solid-phase-bound catalysts.

Research and preparation of ultra purity silicon tetrachloride

NASA Astrophysics Data System (ADS)

Wan, Ye; Zhao, Xiong; Yan, Dazhou; Yang, Dian; Li, Yunhao; Guo, Shuhu

2017-10-01

This article demonstrated a technology for producing ultra-purity silicon tetrachloride, which using the high purity SiCl4 as raw material through the method of combination ray reaction with purification. This technology could remove metal impurities and compounds impurities contained hydrogen effectively. The purity of product prepared by this technology can reach at 99.9999%, content of metal impurities can be low at 0.3PPb, meeting the requirement of industry easily. This technology has the advantages of simple process, continuous operation, and stable performance.

Preparation for Bagging OA-7 CYGNUS

NASA Image and Video Library

2017-02-21

In the Space Station Processing Facility high bay at NASA's Kennedy Space Center in Florida, technicians are preparing Orbital ATK's CYGNUS pressurized cargo module for bagging. The Orbital ATK CRS-7 commercial resupply services mission to the International Space Station is scheduled to launch atop a United Launch Alliance Atlas V rocket from Space Launch Complex 41 at Cape Canaveral Air Force Station on March 19, 2017. CYGNUS will deliver thousands of pounds of supplies, equipment and scientific research materials to the space station.

Effects of video-based therapy preparation targeting experiential acceptance or the therapeutic alliance.

PubMed

Johansen, Ayna B; Lumley, Mark; Cano, Annmarie

2011-06-01

Preparation for psychotherapy may enhance the psychotherapeutic process, reduce drop-outs, and improve outcomes, but the effective mechanisms of such preparation are poorly understood. Previous studies have rarely targeted specific processes that are associated with positive therapy outcomes. This randomized experiment compared the effects of preparatory videos that targeted either the Therapeutic Alliance, Experiential Acceptance, or a Control video on early therapeutic process variables in 105 patients seen in individual therapy. Participants watched the videos just before their first therapy session. No significant differences were found between the Alliance and Experiential Acceptance videos on patient recommendations, immediate affective reactions, or working alliance and attrition after the first session. However, the Therapeutic Alliance video produced an immediate increase in negative mood relative to the Control video, whereas the Experiential acceptance video produced a slight increase in positive mood relative to the Alliance video. Surprisingly, patients who viewed the Alliance video were rated significantly lower than the control group on therapist-rated alliance after the first session. These findings suggest there may be specific process effects in the early phase of treatment based on the type of pretraining material used, and also indicate that video-based pretraining efforts could be counterproductive. Furthermore, this research contributes to the literature by providing insights into methodological considerations for future work on the use of technology in psychotherapy and challenges associated with preparing people for successful psychotherapy.

Assumptions made when preparing drug exposure data for analysis have an impact on results: An unreported step in pharmacoepidemiology studies.

PubMed

Pye, Stephen R; Sheppard, Thérèse; Joseph, Rebecca M; Lunt, Mark; Girard, Nadyne; Haas, Jennifer S; Bates, David W; Buckeridge, David L; van Staa, Tjeerd P; Tamblyn, Robyn; Dixon, William G

2018-04-17

Real-world data for observational research commonly require formatting and cleaning prior to analysis. Data preparation steps are rarely reported adequately and are likely to vary between research groups. Variation in methodology could potentially affect study outcomes. This study aimed to develop a framework to define and document drug data preparation and to examine the impact of different assumptions on results. An algorithm for processing prescription data was developed and tested using data from the Clinical Practice Research Datalink (CPRD). The impact of varying assumptions was examined by estimating the association between 2 exemplar medications (oral hypoglycaemic drugs and glucocorticoids) and cardiovascular events after preparing multiple datasets derived from the same source prescription data. Each dataset was analysed using Cox proportional hazards modelling. The algorithm included 10 decision nodes and 54 possible unique assumptions. Over 11 000 possible pathways through the algorithm were identified. In both exemplar studies, similar hazard ratios and standard errors were found for the majority of pathways; however, certain assumptions had a greater influence on results. For example, in the hypoglycaemic analysis, choosing a different variable to define prescription end date altered the hazard ratios (95% confidence intervals) from 1.77 (1.56-2.00) to 2.83 (1.59-5.04). The framework offers a transparent and efficient way to perform and report drug data preparation steps. Assumptions made during data preparation can impact the results of analyses. Improving transparency regarding drug data preparation would increase the repeatability, reproducibility, and comparability of published results. © 2018 The Authors. Pharmacoepidemiology & Drug Safety Published by John Wiley & Sons Ltd.

Experience in feeding coal into a liquefaction process development unit

NASA Technical Reports Server (NTRS)

Akhtar, S.; Friedman, S.; Mazzocco, N. J.; Yavorsky, P. M.

1977-01-01

A system for preparing coal slurry and feeding it into a high pressure liquefaction plant is described. The system was developed to provide supporting research and development for the Bureau of Mines coal liquefaction pilot plant. Operating experiences are included.

SPAR 6 experiment report containerless processing of glass experiment 74-42

NASA Technical Reports Server (NTRS)

Happe, R. A.

1980-01-01

Pertinent portions of the ground based research are described, including experiments leading to the selection of the flight sample composition: a silica modified gallia-calcia glass. Included are details of the preparation of an approximately .25 in diameter flight sample.

National Academy of Sciences - National Research Council Resident Research Associateship Program (RRA)

DTIC Science & Technology

1992-03-11

calcim phosphate ceranuc- organic acid composites were prepared from hydroxyapatite , tricalcium phosphate, or zinc calcium phosphate, with malic acid...pressures during deposition. The film processing parameters and the basic mechanisms for the optimized conditions have been established for a possible...encountered laboratory influences detrimental to your Proposed research? Explain. Comments: JI - ve r " i O wt4 w 4 h0 - Ic hto cm pxtc 1/C Brie.f resume oa

Research studies on advanced optical module/head designs for optical devices

NASA Technical Reports Server (NTRS)

Burke, James J.

1991-01-01

A summary is presented of research in optical data storage materials and of research at the center. The first section contains summary reports under the general headings of: (1) Magnetooptic media: modeling, design, fabrication, characterization, and testing; (2) Optical heads: holographic optical elements; and (3) Optical heads: integrated optics. The second section consist of a proposal entitled, Signal Processing Techniques for Optical Data Storage. And section three presents various publications prepared by the center.

Effectiveness of Vertex Nomination via Seeded Graph Matching to Find Bijections Between Similar Networks

DTIC Science & Technology

2018-02-01

similar methodology as the author’s example was conducted to prepare this dataset for processing via the SGM algorithm. Since and ′ are...TECHNICAL MEMORANDUM APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED STINFO COPY AIR FORCE RESEARCH LABORATORY...PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Air Force Research Laboratory/RIEA 525 Brooks Road Rome NY 13441-4505 8. PERFORMING ORGANIZATION REPORT NUMBER

Image Understanding Research and Its Application to Cartography and Computer-Based Analysis of Aerial Imagery

DTIC Science & Technology

1983-09-01

Report Al-TR-346. Artifcial Intelligence Laboratory, Mamachusetts Institute of Tech- niugy. Cambridge, Mmeh mett. June 19 [G.usmn@ A. Gaman-Arenas...Testbed Coordinator, 415/859-4395 Artificial Intelligence Center Computer Science and Technology Division Prepared for: Defense Advanced Research...to support processing of aerial photographs for such military applications as cartography, Intelligence , weapon guidance, and targeting. A key

A Country in Focus: Empirical Studies on Foreign Language Learning and Teaching in China (2008-2011)--A Review of Selected Research

ERIC Educational Resources Information Center

Gao, Xuesong; Liao, Yanyi; Li, Yuxia

2014-01-01

In this review, we highlight 60 articles from 1,120 empirical studies in leading language learning and teaching journals published on the Chinese mainland during the years 2008-2011. In preparing the review, we have found Chinese researchers addressing a wide range of topics including language learners' cognitive processes, their language…

Preliminary Reports, Memoranda and Technical Notes of the Materials Research Council Summer Conference, La Jolla, California

DTIC Science & Technology

1986-07-01

also known. 27 For Li, Na, K, Rb, and Cs plus C02, one observes 28,29 species like -N [M+ , C021, [ M+ , (C02 )2"] and, ultimately, the metal oxalate ...many opportunities for significant research on hydrothermal processes, e.g., the preparation of clean oxide powders for ceramic uses. We believe the high

A new sol-gel processing routine without chelating agents for preparing highly transparent solutions and nanothin films: engineering the role of chemistry to design the process

NASA Astrophysics Data System (ADS)

Ashiri, Rouholah

2015-01-01

The great sensitivity of titanium alkoxides to hydrolysis makes their sol-gel transformation very fast and thus difficult to control. A method was proposed to alleviate this drawback. Preparation of highly transparent solutions and nanothin films is another objective of the present research. Employing nanoemulsion method and optimizing the processing conditions, a clear solution of well-dispersed nanosized particles was obtained. With the proposed process BaTiO3 precursor sols and nanothin films with enhanced optical transparency towards the visible were prepared. The optimal formulation of the sol consists of acetic acid, barium acetate, 2-propanol, TTIP and deionized water with 6:1:1:1:150 M ratios, respectively. It was found that the reduction of the temperature in the initial stage of mixing of precursors controls the size of the forming species and accordingly improves the stability and transparency of the sol. The results also showed that the applied modifications and optimizations significantly downsize the particles within the sol to the nanometric scale and accordingly result in a significant improvement in the optical response of the products.

Formation and evolution of anodic TiO2 nanotube embryos

NASA Astrophysics Data System (ADS)

Jin, Rong; Liao, Maoying; Lin, Tong; Zhang, Shaoyu; Shen, Xiaoping; Song, Ye; Zhu, Xufei

2017-06-01

Anodic TiO2 nanotubes (ATNTs) have been widely investigated for decades due to their interesting nanostructures and various applications. However, the formation mechanism of ATNTs still remains unclear. To date, most of researches focus on the tubular structure but neglect the formation process of initial nanotube embryos. Herein, polyethylene glycol (PEG) is added into the traditional electrolyte to moderate the transformation process from compact layer to porous layer. Based on ‘oxygen bubble mould’ and ‘plastic flow model’ theory, the formation and evolution process of nanotube embryo is clarified firstly. Results validate the effect of ‘oxygen bubble mould’ on the formation of nanotube embryo, which has a great effect on regulating the morphology of ATNT arrays. Besides, nanotubes prepared in electrolytes with PEG show shorter tube length with larger diameter than that prepared in traditional electrolytes. The addition of PEG can also effectively avoid the breakdown phenomenon. Highlights Transformation from compact layer into porous layer is observed in PEG electrolyte. The effect of oxygen bubble mould is first demonstrated and observed. The formation process of TiO2 nanotube embryo is described systematically. TiO2 nanotubes prepared in PEG electrolyte show short length and large diameter.

Parametric identification of the process of preparing ceramic mixture as an object of control

NASA Astrophysics Data System (ADS)

Galitskov, Stanislav; Nazarov, Maxim; Galitskov, Konstantin

2017-10-01

Manufacture of ceramic materials and products largely depends on the preparation of clay raw materials. The main process here is the process of mixing, which in industrial production is mostly done in cross-compound clay mixers of continuous operation with steam humidification. The authors identified features of dynamics of this technological stage, which in itself is a non-linear control object with distributed parameters. When solving practical tasks for automation of a certain class of ceramic materials production it is important to make parametric identification of moving clay. In this paper the task is solved with the use of computational models, approximated to a particular section of a clay mixer along its length. The research introduces a methodology of computational experiments as applied to the designed computational model. Parametric identification of dynamic links was carried out according to transient characteristics. The experiments showed that the control object in question is to a great extent a non-stationary one. The obtained results are problematically oriented on synthesizing a multidimensional automatic control system for preparation of ceramic mixture with specified values of humidity and temperature exposed to the technological process of major disturbances.

Preparing teachers to create a mainstream science classroom conducive to the needs of English-language learners: A feminist action research project

NASA Astrophysics Data System (ADS)

Buck, Gayle; Mast, Colette; Ehlers, Nancy; Franklin, Elizabeth

2005-11-01

A feminist action research team, which consisted of a science educator, an English-language learner (ELL) educator, a first-year science teacher, and a graduate assistant, set a goal to work together to explore the process a beginning teacher goes through to establish a classroom conducive to the needs of middle-level ELL learners. The guiding questions of the study were answered by gathering a wealth of data over the course of 5 months and taken from the classroom, planning sessions, and researchers and students. These data were collected by observations, semistructured interviews, and written document reviews. The progressive analysis ultimately revealed that: (a) successful strategies a beginning teacher must utilize for teaching middle-level ELL children in a mainstream classroom involve complex structural considerations that are not part of the teacher's preparation; (b) learning increases for all children, but there are differences in learning achievement between ELL and non-ELL children; and (c) student and peer feedback proved to be an effective means of enhancing the growth of a beginning teacher seeking to increase her skills in teaching ELL learners. The experiences and findings from this project have implications for teacher preparation programs committed to preparing educators to teach science to all children.

Specimen preparation, imaging, and analysis protocols for knife-edge scanning microscopy.

PubMed

Choe, Yoonsuck; Mayerich, David; Kwon, Jaerock; Miller, Daniel E; Sung, Chul; Chung, Ji Ryang; Huffman, Todd; Keyser, John; Abbott, Louise C

2011-12-09

Major advances in high-throughput, high-resolution, 3D microscopy techniques have enabled the acquisition of large volumes of neuroanatomical data at submicrometer resolution. One of the first such instruments producing whole-brain-scale data is the Knife-Edge Scanning Microscope (KESM), developed and hosted in the authors' lab. KESM has been used to section and image whole mouse brains at submicrometer resolution, revealing the intricate details of the neuronal networks (Golgi), vascular networks (India ink), and cell body distribution (Nissl). The use of KESM is not restricted to the mouse nor the brain. We have successfully imaged the octopus brain, mouse lung, and rat brain. We are currently working on whole zebra fish embryos. Data like these can greatly contribute to connectomics research; to microcirculation and hemodynamic research; and to stereology research by providing an exact ground-truth. In this article, we will describe the pipeline, including specimen preparation (fixing, staining, and embedding), KESM configuration and setup, sectioning and imaging with the KESM, image processing, data preparation, and data visualization and analysis. The emphasis will be on specimen preparation and visualization/analysis of obtained KESM data. We expect the detailed protocol presented in this article to help broaden the access to KESM and increase its utilization.

Non-contact Measurement of Creep in Ultra-High-Temperature Materials

DTIC Science & Technology

2009-11-04

Task 1: Process UHTC materials at the relevant temperatures in Electrostatic Levitation for extended periods. 5 3.5 Task 2: Prepare the required high...Electrostatic Levitation ITI Industrial Tectonics, Inc. MSFC NASA George C. Marshall Space Flight Center NASA National Aeronautics and Space...was divided into certain research questions: Can high-precision UHTC spheres be processed in Electrostatic Levitation (ESL) at the relevant

Getting Started in Academic Careers: On the Cutting Edge Resources for Graduate Students, Postdoctoral Fellows, and Early Career Faculty

NASA Astrophysics Data System (ADS)

MacDonald, R.; Ormand, C.; Manduca, C. A.; Wright-Dunbar, R.; Allen-King, R.

2007-12-01

The professional development program,'On the Cutting Edge', offers on-line resources and annual multi-day workshops for graduate students and post-doctoral fellows interested in pursuing academic careers. Pre- workshop surveys reveal that early career faculty, post-docs, and graduate students have many questions about teaching (e.g., what are effective teaching strategies, how to design a course, how to prepare a syllabus, how to teach large courses), research (e.g., initiate and fund future research, set up and manage a lab, obtain equipment), and career management (e.g., understand tenure requirements, balance all it all). The graduate students and post-docs also have questions about jobs and the job search process. Their questions show a lack of familiarity with the nature of academic positions at different kinds of educational institutions (two-year colleges, primarily undergraduate institutions, and research universities). In particular, they are uncertain about what educational setting will best fit their values and career goals and how teaching loads and research expectations vary by institution. Common questions related to the job search process include where to find job listings (the most common question in recent years), when to start the job search process, how to stand out as an applicant, and how to prepare for interviews. Both groups have questions about how to develop new skills: how to develop, plan and prepare a new course (without it taking all of their time), how to expand beyond their PhD (or postdoc) research projects, how to develop a research plan, and where to apply for funding. These are important topics for advisors to discuss with all of their students and postdocs who are planning on careers in academia. On the Cutting Edge offers workshops and web resources to help current and future faculty navigate these critical stages of their careers. The four-day workshop for Early Career Geoscience Faculty: Teaching, Research, and Managing Your Career has been offered since 1999 and provides sessions on teaching strategies, course design, developing a strategic plan for research, supervising student researchers, navigating departmental and institutional politics, tenure, time and task management, and much more. The workshop, Preparing for an Academic Career in the Geosciences, has been offered since 2003 and provides a panel about academic careers in different institutional settings, session on research on learning, various teaching strategies, design of effective classroom activities, moving research forward to new settings, negotiation, and presenting oneself to others. Participants in both workshops have many opportunities to talk informally with leaders and other participants. Assessment results indicate that the workshops are helpful for both current and future faculty. Participants particularly appreciate the practical ideas and the opportunity to interact with, and learn from, a diverse leadership team and other participants. Two on-line resource collections provides information in these areas useful for students, post-docs, early career faculty and advisors.

Methods for systematic reviews of health economic evaluations: a systematic review, comparison, and synthesis of method literature.

PubMed

Mathes, Tim; Walgenbach, Maren; Antoine, Sunya-Lee; Pieper, Dawid; Eikermann, Michaela

2014-10-01

The quality of systematic reviews of health economic evaluations (SR-HE) is often limited because of methodological shortcomings. One reason for this poor quality is that there are no established standards for the preparation of SR-HE. The objective of this study is to compare existing methods and suggest best practices for the preparation of SR-HE. To identify the relevant methodological literature on SR-HE, a systematic literature search was performed in Embase, Medline, the National Health System Economic Evaluation Database, the Health Technology Assessment Database, and the Cochrane methodology register, and webpages of international health technology assessment agencies were searched. The study selection was performed independently by 2 reviewers. Data were extracted by one reviewer and verified by a second reviewer. On the basis of the overlaps in the recommendations for the methods of SR-HE in the included papers, suggestions for best practices for the preparation of SR-HE were developed. Nineteen relevant publications were identified. The recommendations within them often differed. However, for most process steps there was some overlap between recommendations for the methods of preparation. The overlaps were taken as basis on which to develop suggestions for the following process steps of preparation: defining the research question, developing eligibility criteria, conducting a literature search, selecting studies, assessing the methodological study quality, assessing transferability, and synthesizing data. The differences in the proposed recommendations are not always explainable by the focus on certain evaluation types, target audiences, or integration in the decision process. Currently, there seem to be no standard methods for the preparation of SR-HE. The suggestions presented here can contribute to the harmonization of methods for the preparation of SR-HE. © The Author(s) 2014.

Universal, In Situ Transformation of Bulky Compounds into Nanoscale Catalysts by High-Temperature Pulse.

PubMed

Xu, Shaomao; Chen, Yanan; Li, Yiju; Lu, Aijiang; Yao, Yonggang; Dai, Jiaqi; Wang, Yanbin; Liu, Boyang; Lacey, Steven D; Pastel, Glenn R; Kuang, Yudi; Danner, Valencia A; Jiang, Feng; Fu, Kun Kelvin; Hu, Liangbing

2017-09-13

The synthesis of nanoscale metal compound catalysts has attracted much research attention in the past decade. The challenges of preparation of the metal compound include the complexity of the synthesis process and difficulty of precise control of the reaction conditions. Herein, we report an in situ synthesis of nanoparticles via a high-temperature pulse method where the bulk material acts as the precursor. During the process of rapid heating and cooling, swift melting, anchoring, and recrystallization occur, resulting in the generation of high-purity nanoparticles. In our work, the cobalt boride (Co 2 B) nanoparticles with a diameter of 10-20 nm uniformly anchored on the reduced graphene oxide (rGO) nanosheets were successfully prepared using the high temperature pulse method. The as-prepared Co 2 B/rGO composite displayed remarkable electrocatalytic performance for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). We also prepared molybdenum disulfide (MoS 2 ) and cobalt oxide (Co 3 O 4 ) nanoparticles, thereby demonstrating that the high-temperature pulse is a universal method to synthesize ultrafine metal compound nanoparticles.

The effects of message framing within the stages of change on smoking cessation intentions and behaviors.

PubMed

Cornacchione, Jennifer; Smith, Sandi W

2012-01-01

This study examines two commonly used and accepted theoretical models in health communication-the stages of change and message framing-to determine whether gain- or loss-framed messages are more effective at getting people to intend to quit smoking depending on their current stage of change (precontemplation, contemplation, or preparation). One hundred forty-eight current smokers were exposed to one of four gain- or loss-framed messages that emphasized the benefits of cessation or the costs of smoking. Message believability, message processing, and stage movement were measured to see if any differences existed as a function of the individual's base stage of change and message frame exposure. Overall, results indicated that all participants, regardless of stage and frame, engaged in more central than peripheral message processing. However, those in the precontemplation/loss frame and preparation/gain frame conditions engaged in significantly less cognitive processing than those in all other conditions. Additionally, gain-framed messages were most influential at getting individuals to progress from the contemplation to the preparation stage. Implications and future directions for research are also discussed.

The Evaluation of High Temperature Adhesive Bonding Processes for Rocket Engine Combustion Chamber Applications

NASA Technical Reports Server (NTRS)

McCray, Daniel; Smith, Jeffrey; Rice, Brian; Blohowiak, Kay; Anderson, Robert; Shin, E. Eugene; McCorkle, Linda; Sutter, James

2003-01-01

NASA Glenn Research Center is currently evaluating the possibility of using high- temperature polymer matrix composites to reinforce the combustion chamber of a rocket engine. One potential design utilizes a honeycomb structure composed of a PMR-II- 50/M40J 4HS composite facesheet and titanium honeycomb core to reinforce a stainless steel shell. In order to properly fabricate this structure, adhesive bond PMR-II-50 composite. Proper prebond surface preparation is critical in order to obtain an acceptable adhesive bond. Improperly treated surfaces will exhibit decreased bond strength and durability, especially in metallic bonds where interface are susceptible to degradation due to heat and moisture. Most treatments for titanium and stainless steel alloys require the use of strong chemicals to etch and clean the surface. This processes are difficult to perform due to limited processing facilities as well as safety and environmental risks and they do not consistently yield optimum bond durability. Boeing Phantom Works previously developed sol-gel surface preparations for titanium alloys using a PETI-5 based polyimide adhesive. In support of part of NASA Glenn Research Center, UDRI and Boeing Phantom Works evaluated variations of this high temperature sol-gel surface preparation, primer type, and primer cure conditions on the adhesion performance of titanium and stainless steel using Cytec FM 680-1 polyimide adhesive. It was also found that a modified cure cycle of the FM 680-1 adhesive, i.e., 4 hrs at 370 F in vacuum + post cure, significantly increased the adhesion strength compared to the manufacturer's suggested cure cycle. In addition, the surface preparation of the PMR-II-50 composite was evaluated in terms of surface cleanness and roughness. This presentation will discuss the results of strength and durability testing conducted on titanium, stainless steel, and PMR-II-50 composite adherends to evaluate possible bonding processes.

Framework for Research on Children’s Reactions to Disasters and Terrorist Events

PubMed Central

Pfefferbaum, Betty; Noffsinger, Mary A.; Sherrieb, Kathleen; Norris, Fran H.

2012-01-01

Clinical work and research relative to child mental health during and following disaster are especially challenging due to the complex child maturational processes and family and social contexts of children’s lives. The effects of disasters and terrorist events on children and adolescents necessitate diligent and responsible preparation and implementation of research endeavors. Disasters present numerous practical and methodological barriers that may influence the selection of participants, timing of assessments, and constructs being investigated. This article describes an efficient approach to guide both novice and experienced researchers as they prepare to conduct disaster research involving children. The approach is based on five fundamental research questions: “Why?, Who?, When?, What?, and How?” Addressing each of the “four Ws” will assist researchers in determining “How” to construct and implement a study from start to finish. A simple diagram of the five questions guides the reader through the components involved in studying children’s reactions to disasters. The use of this approach is illustrated with examples from disaster mental health studies in children, thus simultaneously providing a review of the literature. PMID:23034149

[Elaboration of instant corn flour by hydrothermal process I].

PubMed

Martínez B, F; el-Dahs, A A

1993-12-01

The objective of this research was to investigate a simplified hydrothermal process for the production of instant corn flour and evaluate some variables that affected the degree of gelatinization of corn flour, and evaluate some technological characteristics of the flour. The use of grits of lesser particle diameter and increasing temperature of the soaking water resulted in an increase in the rate of absorption of water of grits, permitting a reduction of soaking time necessary for the process. The instant corn flour prepared by the hydrothermal process using corn grits soaked in water at room temperature (28-30 degrees C) for 5 hours and steaming for 1 minute at 118 degrees C presented characteristics of viscosity, water absorption index and water solubility index similar to that of flours prepared with grits soaked in water at a temperature higher tan room temperature and different steaming time (5 and 15 minutes). The characteristics of color and shelf life of corn flour were improved with the hydrothermal process.

Heat Effects on Living Plants

Treesearch

Robert C. Hare

1961-01-01

This review of knowledge concerning the effects of high temperatures on plants was undertaken in preparation for research aimed at determining how forest fires affect physiological processes in woody species. Major subjects discussed include morphological and physiological responses to high temperatures, external and internal factors governing these responses,...

Making Role-Playing Real

ERIC Educational Resources Information Center

Schafer, Josephine Gatti

2016-01-01

Recent research in public administration on governance, networks, and deliberative democracy, has highlighted the need to develop a skill set in graduates of Public Administration programs that prepares them for the interpersonal and relational challenges of the policy process. The skills needed to manage in increasingly complex and networked…

An Identification Process and Evaluation Framework for Texas Gulf Containerports

DOT National Transportation Integrated Search

2000-12-01

This is the second in a series of four reports prepared by the Center for Transportation Research at the University of Texas at Austin for the Texas Department of Transportation (TxDOT) to explore containership activity in the Gulf of Mexico. The ori...

Depth distribution of exchangeable aluminum in acid soils: A study from subtropical Brazil

USDA-ARS?s Scientific Manuscript database

High exchangeable aluminum (Al3+) requires greater attention when preparing agricultural soils. However, research examining the relationship between natural levels of soil Al3+ and pedogenetic processes receives little priority, particularly regarding the number of soil profiles investigated. To rep...

Variability of the institutional review board process within a national research network.

PubMed

Khan, Muhammad A; Barratt, Michelle S; Krugman, Scott D; Serwint, Janet R; Dumont-Driscoll, Marilyn

2014-06-01

To determine the variability of the institutional review board (IRB) process for a minimal risk multicenter study. Participants included 24 Continuity Research Network (CORNET) sites of the Academic Pediatric Association that participated in a cross-sectional study. Each site obtained individual institutional IRB approval. An anonymous questionnaire went to site investigators about the IRB process at their institution. Twenty-two of 24 sites (92%) responded. Preparation time ranged from 1 to 20 hours, mean of 7.1 hours. Individuals submitting ≤3 IRB applications/year required more time for completion than those submitting >3/year (P < .05). Thirteen of 22 (59%) study sites received approval with "exempt" status, and 6 (27%) approved as "expedited" studies. IRB experiences were highly variable across study sites. These findings indicate that multicenter research projects should anticipate barriers to timely study implementation. Improved IRB standardization or centralization for multicenter clinical studies would facilitate this type of practice-based clinical research.

Synthetic Talc and Talc-Like Structures: Preparation, Features and Applications.

PubMed

Claverie, Marie; Dumas, Angela; Carême, Christel; Poirier, Mathilde; Le Roux, Christophe; Micoud, Pierre; Martin, François; Aymonier, Cyril

2018-01-12

This contribution gives a comprehensive review about the progress in preparation methods, properties and applications of the different synthetic talc types: i) crystalline nanotalc synthesized by hydrothermal treatment; ii) amorphous and/or short-range order nanotalc obtained by precipitation, and iii) organic-inorganic hybrid talc-like structures obtained through a sol-gel process or a chemical grafting. Several advantages of nanotalc such as high chemical purity, high surface area, tunable submicronic size, high thermal stability, and hydrophilic character (leading to be the first fluid mineral) are emphasized. Synthetic nanotalc applications are also considered including its use as nanofiller in composite materials, as absorbers of organic compounds, as anticorrosion coatings and as agents for cosmetic applications. Regarding their high industrial application potential, intensive research has been carried out to better understand their behavior and develop processes to produce them. To facilitate further research and development, scientific and technical challenges are discussed in this Review article. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Development of a high-density nonwoven structure to improve the stab resistance of protective clothing material.

PubMed

Bao, Limin; Wang, Yanling; Baba, Takeichiro; Fukuda, Yasuhiro; Wakatsuki, Kaoru; Morikawa, Hideaki

2017-12-07

The purpose of this research was to enhance the stab resistance of protective clothing material by developing a new high-density nonwoven structure. Ice picks often injure Japanese police officers due to the strict regulation of swords in the country. Consequently, this study was designed to improve stab resistance against ice picks. Most existing anti-stab protective clothing research has focused on various fabrics impregnated with resin, an approach that brings with it problems of high cost and complicated processing. Seldom has research addressed the potential for improving stab resistance by using nonwoven structures, which exhibit better stab resistance than fabric. In this research, we prepared a series of nonwoven structures with densities ranging from about 0.14 g/cm 3 to 0.46 g/cm 3 by varying the number of stacked layers of Kevlar/polyester nonwoven under a hot press. We then proposed two methods for producing such hot-press nonwovens: the multilayer hot-press method and the monolayer hot-press method. Stab resistance was evaluated according to NIJ Standard-0115.00. We also investigated the relationship among nonwoven density, stab resistance, and flexural rigidity, and here we discuss the respective properties of the two proposed methods. Our results show that stab resistance and flexural rigidity increase with nonwoven density, but flexural rigidity of nonwovens prepared using the monolayer hot-press method only shows a slight change as nonwoven density increases. Though the two methods exhibit little difference in maximum load, the flexural rigidity of nonwovens prepared using the monolayer hot-press method is much lower, which contributes to superior wear comfort. Finally, we investigated the mechanism behind the stabbing process. Stabbing with an ice pick is a complicated process that involves many factors. Our findings indicate that nonwovens stop penetration primarily in two ways: nonwoven deformation and fiber fractures.

Development of a high-density nonwoven structure to improve the stab resistance of protective clothing material

PubMed Central

BAO, Limin; WANG, Yanling; BABA, Takeichiro; FUKUDA, Yasuhiro; WAKATSUKI, Kaoru; MORIKAWA, Hideaki

2017-01-01

The purpose of this research was to enhance the stab resistance of protective clothing material by developing a new high-density nonwoven structure. Ice picks often injure Japanese police officers due to the strict regulation of swords in the country. Consequently, this study was designed to improve stab resistance against ice picks. Most existing anti-stab protective clothing research has focused on various fabrics impregnated with resin, an approach that brings with it problems of high cost and complicated processing. Seldom has research addressed the potential for improving stab resistance by using nonwoven structures, which exhibit better stab resistance than fabric. In this research, we prepared a series of nonwoven structures with densities ranging from about 0.14 g/cm3 to 0.46 g/cm3 by varying the number of stacked layers of Kevlar/polyester nonwoven under a hot press. We then proposed two methods for producing such hot-press nonwovens: the multilayer hot-press method and the monolayer hot-press method. Stab resistance was evaluated according to NIJ Standard-0115.00. We also investigated the relationship among nonwoven density, stab resistance, and flexural rigidity, and here we discuss the respective properties of the two proposed methods. Our results show that stab resistance and flexural rigidity increase with nonwoven density, but flexural rigidity of nonwovens prepared using the monolayer hot-press method only shows a slight change as nonwoven density increases. Though the two methods exhibit little difference in maximum load, the flexural rigidity of nonwovens prepared using the monolayer hot-press method is much lower, which contributes to superior wear comfort. Finally, we investigated the mechanism behind the stabbing process. Stabbing with an ice pick is a complicated process that involves many factors. Our findings indicate that nonwovens stop penetration primarily in two ways: nonwoven deformation and fiber fractures. PMID:28978816

Social and Contextual Constraints on Embodied Perception.

PubMed

Schnall, Simone

2017-03-01

A number of papers have challenged research on physiological and psychological influences on perception by claiming to show that such findings can be explained by nonperceptual factors such as demand characteristics. Relatedly, calls for separating perception from judgment have been issued. However, such efforts fail to consider key processes known to shape judgment processes: people's inability to report accurately on their judgments, conversational dynamics of experimental research contexts, and misattribution and discounting processes. Indeed, the fact that initially observed effects of embodied influences disappear is predicted by an extensive amount of literature on judgments studied within social psychology. Thus, findings from such studies suggest that the initially presumed underlying processes are at work-namely, functional considerations that are informative in the context of preparing the body for action. In this article, I provide suggestions on how to conduct research on perception within the social constraints of experimental contexts.

KSC-06pd0971

NASA Image and Video Library

2006-06-01

KENNEDY SPACE CENTER, FLA. - Inside the Space Station Processing Facility at NASA's Kennedy Space Center, an overhead crane settles the Columbus module onto a work stand. Columbus is the European Space Agency's research laboratory for the International Space Station. The module will be prepared for delivery to the space station on a future space shuttle mission. Columbus will expand the research facilities of the station and provide researchers with the ability to conduct numerous experiments in the area of life, physical and materials sciences. Photo credit: NASA/Jim Grossmann

KSC-06pd0970

NASA Image and Video Library

2006-06-01

KENNEDY SPACE CENTER, FLA. - Inside the Space Station Processing Facility at NASA's Kennedy Space Center, an overhead crane lowers the Columbus module toward a work stand. Columbus is the European Space Agency's research laboratory for the International Space Station. The module will be prepared for delivery to the space station on a future space shuttle mission. Columbus will expand the research facilities of the station and provide researchers with the ability to conduct numerous experiments in the area of life, physical and materials sciences. Photo credit: NASA/Jim Grossmann

Photon-Enhanced Electron Attachment Processes in Discharge-Opening Switches.

DTIC Science & Technology

1987-02-01

period from 15 August 1983 through Auget 4 By: M. J. Rossi, H. Helm, and D. C. Lorents MAY 2 699 Prepared for: U.S. ARMY RESEARCH OFFICE P.O. Box 12211...A.. - .. Research Triangle Park, NC 27709 Attention: Dr. R. Gunther and Dr. D. Skatrud Contract No. DAAG29-83-K-01 13 SRI Project PYU-6261 Approved...iDENTIFICATION NUMBER ORGANIZATION (if applicable) J.S. Army Research office [________A -X e3 Ot-03 SC. ADDRESS (City, State. and ZIP Code) 10 SOURCE OF

Workforce Preparation - A Breakout Session for the Building Strong Geoscience Departments Visiting Workshop Program

NASA Astrophysics Data System (ADS)

Doser, D. I.

2009-12-01

We have designed a workshop breakout session and accompanying web based materials to assist geoscience departments in better preparing their students for professional careers following graduation. The session explores ways to obtain feedback about career preparation from employers and alumni that can be used to develop more effective curriculum, as well as departmental activities to better prepare students for employment opportunities. In addition, it identifies sources outside a department that can be used in the workforce preparation process and methods to assess any changes implemented to prepare students for the workforce. Concrete examples include feedback from a survey of recent (< 5 years) alumni at the University of Texas at El Paso, student run research meetings with built-in assessment opportunities, and a wealth of on-line resources. The session was initially tested in June 2009 at the Strengthening Your Strong Geoscience Department workshop. Comments from the June participants have been used to improve the session for the 2009-2010 “visiting workshop” program.

Studies on the preparation of Caro’s acid by ultrasonic enhanced electrochemistry

NASA Astrophysics Data System (ADS)

Li, Linbo; Yu, Zeli; Hong, Tao; Fang, Zhao; Peng, Jishi; Yang, Zhao

2017-06-01

Ultrasonic cavitation effects can generate hydroxyl radicals and high energy, which is widely applied in the field of oxidation currently. Ultrasound-enhanced electrochemical is used to prepare Caro’s acid, which improves the generate rate of Caro’s acid. In this article, the influences of ultrasonic frequency and ultrasonic power on the electrolysis voltage, electrolyte temperature, electrolyte concentration and the concentration of additive in the process of electrochemical preparation of Caro’s acid was studied. And the optimal production conditions were determined. The research results showed that ultrasonic can significantly improve the production of Caro’s acid and the product can increase by about 20 g/L under the best condition.

Veg-03 Pillows Preparation for Flight

NASA Image and Video Library

2016-03-21

Inside a laboratory in the Space Station Processing Facility at NASA’s Kennedy Space Center in Florida, research scientists prepare the plant pillows for the Veg-03 experiment that will be delivered to the International Space Station aboard the eighth SpaceX Dragon commercial resupply mission. Matt Romeyn, a NASA pathways intern, measures out the calcined clay, or space dirt, for one of the plant pillows. To his right is Dr. Gioia Massa, NASA payload scientist for Veggie. The Veg-03 plant pillows will contain ‘Tokyo Bekana’ cabbage seeds and lettuce seeds for NASA’s third Veggie plant growth system experiment. The experiment will continue NASA’s deep space plant growth research to benefit the Earth and the agency’s journey to Mars.

Chemically Initiated Electron-Exchange Luminescence.

DTIC Science & Technology

1980-11-14

CONTROLLING OFFICE NAME AND ADDRESS IQ. REPORT DATE Chemistry Program, raterials Science Division, November 14, 1980 Office of Naval Research, 800 N. Quincy...A./IHorn Prepared for Publication in9 z Chemi- and Bio-Energized Processes School of Chemical Sciences University of Illinois Urbana, Illinois 61801...National Science Foundation and in part by the Office of Naval Research. GBS is a Fellow of the Alfred P. Sloan Foundation (1977-79) and The Dreyfus

USGS Capabilities to Study the Impacts of Drought and Climate Change in the Southeastern United States

USGS Publications Warehouse

,

2009-01-01

In the Southeast, U.S. Geological Survey (USGS) scientists are researching issues through technical studies of water availability and quality, geologic processes (marine, coastal, and terrestrial), geographic complexity, and biological resources. The USGS is prepared to tackle multifaceted questions associated with global climate change and resulting weather patterns such as drought through expert scientific skill, innovative research approaches, and accurate information technology.

Presenting Research Paper: Learning the steps.

PubMed

Bavdekar, Sandeep B; Anand, Varun; Vyas, Shruti

2017-09-01

For a beginner, presenting a research paper at a conference as a podium presentation can be a daunting task. She is required to choose an appropriate conference for presentation, prepare an abstract, prepare slides and the speech that goes parallel with the slides and train oneself to answer questions posed by the audience. She has also got to overcome the fear of speaking in public and conquer the phobia of encountering a hostile audience ready to shred her paper to pieces. This communication intends to provide useful tips on how to go about preparing and presenting a research paper. Almost every conference has at least one slot reserved for oral or podium presentation of research papers. These podium presentation sessions are important for the presenters, organizers as well as for the attending delegates (Table 1). For the beginners and the recently-initiated, the challenge of organizing all the data and ideas for presentation in less than 10 minutes, might seem overwhelming. Added to that would be the anxiety of speaking in front of a crowd consisting of experts and above all, to be prepared to answer searching questions posed by the delegates. Through this communication, we intend to provide a supporting framework for the beginners about how to go about such scientific presentations, which are so vital for one's career and above all, for advancement of science. Once your research project is over, findings analyzed and report written; you should be on the lookout for conferences where presenting your research would be of relevance and interest to the delegates. But even before the conference is chosen, you could start thinking about the process of presentation. © Journal of the Association of Physicians of India 2011.

Streamlined research funding using short proposals and accelerated peer review: an observational study.

PubMed

Barnett, Adrian G; Herbert, Danielle L; Campbell, Megan; Daly, Naomi; Roberts, Jason A; Mudge, Alison; Graves, Nicholas

2015-02-07

Despite the widely recognised importance of sustainable health care systems, health services research remains generally underfunded in Australia. The Australian Centre for Health Services Innovation (AusHSI) is funding health services research in the state of Queensland. AusHSI has developed a streamlined protocol for applying and awarding funding using a short proposal and accelerated peer review. An observational study of proposals for four health services research funding rounds from May 2012 to November 2013. A short proposal of less than 1,200 words was submitted using a secure web-based portal. The primary outcome measures are: time spent preparing proposals; a simplified scoring of grant proposals (reject, revise or accept for interview) by a scientific review committee; and progressing from submission to funding outcomes within eight weeks. Proposals outside of health services research were deemed ineligible. There were 228 eligible proposals across 4 funding rounds: from 29% to 79% were shortlisted and 9% to 32% were accepted for interview. Success rates increased from 6% (in 2012) to 16% (in 2013) of eligible proposals. Applicants were notified of the outcomes within two weeks from the interview; which was a maximum of eight weeks after the submission deadline. Applicants spent 7 days on average preparing their proposal. Applicants with a ranking of reject or revise received written feedback and suggested improvements for their proposals, and resubmissions composed one third of the 2013 rounds. The AusHSI funding scheme is a streamlined application process that has simplified the process of allocating health services research funding for both applicants and peer reviewers. The AusHSI process has minimised the time from submission to notification of funding outcomes.

New cleaning technologies advance coal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Onursal, B.

1984-05-01

Alternative options are discussed for reducing sulfur dioxide emissions from coal burning utility and industrial sources. Test results indicate that it may be most advantageous to use the AED Process after coal preparation or on coals that do not need much ash removal. However, the developer claims that research efforts after 1981 have led to process improvements for producing clean coals containing 1.5% to 3% ash. This paper describes the test facility where a full-scale test of the AED Process is underway.

The Role of Parent Social Capital and College-Aligned Actions in Explaining Differences in Intergenerational Resource Transfer among Hispanic and White Youth on the Path to College

ERIC Educational Resources Information Center

Ryan, Sarah

2017-01-01

Background: A growing number of scholars argue that Hispanic-White disparities in college pathways are at least partly attributable to the fact that Hispanic students experience the college preparation and enrollment process differently from their White peers. Recent research suggests that one way in which the process differs between the two…

Seeking Stakeholder Views: Iowa Community Colleges @ 2000.

ERIC Educational Resources Information Center

Ebbers, Larry H.; Gardner, Gene

2003-01-01

Summarizes the strategic planning process and findings outlined in the final report of the Iowa Community Colleges @ 2000 research project, initiated by the Iowa Association of Community College Trustees. Addresses the continued importance of access, workforce preparation, quality and the identification of best practices. (Contains 10 references.)…

Restoring Western Ranges and Wildlands, vol. 2

Treesearch

Stephen B. Monsen; Richard Stevens; Nancy L. Shaw

2004-01-01

This work, in three volumes, provides background on philosophy, processes, plant materials selection, site preparation, and seed and seeding equipment for revegetating disturbed rangelands, emphasizing use of native species. The 29 chapters include guidelines for planning, conducting, and managing, and contain a compilation of rangeland revegetation research conducted...

Teacher Involvement in Pre-Service Teacher Education

ERIC Educational Resources Information Center

Mason, Kevin O.

2013-01-01

Many researchers in the field of teacher education have proposed the formation of partnerships between teachers and teacher educators, without explicitly stating what additional roles teachers might play in the teacher preparation process. This article describes how some pre-service teacher education programmes have increased the involvement of…

Preparation, properties, and bonding utilization of pyrolysis bio-oil

USDA-ARS?s Scientific Manuscript database

The rapid increase in energy consumption, limited fossil fuel resource, and environmental concerns have stimulated the research need for biomass-derived fuels and chemicals. Pyrolysis is a thermal degradation process of biomass in the absence of oxygen. The liquid product from pyrolysis is known as ...

Strategic Planning as a Basis for Restructuring Schools.

ERIC Educational Resources Information Center

Adams, Charles F.; Mecca, Thomas V.

An educational planning model and instructional approach to prepare school administrators for the role of strategic planners are described. The model, ED QUEST, integrates future research techniques and divergent thinking modes into a participatory group process that provides visions of alternative futures. Primary activities in the process…

Metacognitive and Multimedia Support of Experiments in Inquiry Learning for Science Teacher Preparation

ERIC Educational Resources Information Center

Bruckermann, Till; Aschermann, Ellen; Bresges, André; Schlüter, Kirsten

2017-01-01

Promoting preservice science teachers' experimentation competency is required to provide a basis for meaningful learning through experiments in schools. However, preservice teachers show difficulties when experimenting. Previous research revealed that cognitive scaffolding promotes experimentation competency by structuring the learning process,…

Restoring Western Ranges and Wildlands, vol. 3

Treesearch

Stephen B. Monsen; Richard Stevens; Nancy L. Shaw

2004-01-01

This work, in three volumes, provides background on philosophy, processes, plant materials selection, site preparation, and seed and seeding equipment for revegetating disturbed rangelands, emphasizing use of native species. The 29 chapters include guidelines for planning, conducting, and managing, and contain a compilation of rangeland revegetation research conducted...

Restoring Western Ranges and Wildlands, vol. 1

Treesearch

Stephen B. Monsen; Richard Stevens; Nancy L. Shaw

2004-01-01

This work, in three volumes, provides background on philosophy, processes, plant materials selection, site preparation, and seed and seeding equipment for revegetating disturbed rangelands, emphasizing use of native species. The 29 chapters include guidelines for planning, conducting, and managing, and contain a compilation of rangeland revegetation research conducted...

Effect of quantum noise on deterministic remote state preparation of an arbitrary two-particle state via various quantum entangled channels

NASA Astrophysics Data System (ADS)

Qu, Zhiguo; Wu, Shengyao; Wang, Mingming; Sun, Le; Wang, Xiaojun

2017-12-01

As one of important research branches of quantum communication, deterministic remote state preparation (DRSP) plays a significant role in quantum network. Quantum noises are prevalent in quantum communication, and it can seriously affect the safety and reliability of quantum communication system. In this paper, we study the effect of quantum noise on deterministic remote state preparation of an arbitrary two-particle state via different quantum channels including the χ state, Brown state and GHZ state. Firstly, the output states and fidelities of three DRSP algorithms via different quantum entangled channels in four noisy environments, including amplitude-damping, phase-damping, bit-flip and depolarizing noise, are presented, respectively. And then, the effects of noises on three kinds of preparation algorithms in the same noisy environment are discussed. In final, the theoretical analysis proves that the effect of noise in the process of quantum state preparation is only related to the noise type and the size of noise factor and independent of the different entangled quantum channels. Furthermore, another important conclusion is given that the effect of noise is also independent of how to distribute intermediate particles for implementing DRSP through quantum measurement during the concrete preparation process. These conclusions will be very helpful for improving the efficiency and safety of quantum communication in a noisy environment.

Coal technology program progress report, February 1976

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Final testing of the 20-atm bench-scale system is underway in preparation for experiments with hydrogen. Laboratory-scale testing of a number of inexpensive pure compounds to improve the settling rate of solids in Solvent Refined Coal (SRC) unfiltered oil (UFO), bench-scale testing of the effect of the Tretolite additive on settling, and characterization tests on a new sample of UFO from the PAMCO-SRC process are reported. Experimental engineering support of an in situ gasification process include low-temperature pyrolyses at exceptionally low heating rates (0.3/sup 0/C/min). Highly pyrophoric chars were consistently produced. Aqueous by-products from coal conversion technologies and oil shale retortingmore » have been analyzed directly to determine major organic components. A report is being prepared discussing various aspects of the engineering evaluations of nuclear process heat for coal. A bench-scale test program on thermochemical water splitting for hydrogen production is under consideration. In the coal-fueled MIUS program, preparations for procurement of tubing for the matrix in the fluidized-bed furnace and for fabrication of the furnace continued. Analyses of the AiResearch gas turbine and recuperator under coal-fueled MIUS operating conditions are near completion. Process flow diagrams and heat and material balances were completed for most of the units in the synthoil process. Overall utilities requirements were calculated and the coal preparation flowsheets were finalized. For hydrocarbonization, the flowsheet was revised to include additional coal data. Flowsheets were finalized for the acid gas separation and recycle, and the oil-solids separation. (LTN)« less

Veg-03 Pillows Preparation for Flight

NASA Image and Video Library

2016-03-23

Inside a laboratory in the Space Station Processing Facility at NASA’s Kennedy Space Center in Florida, 18 plant pillows for the Veg-03 experiment have been prepared for delivery to the International Space Station aboard the eighth SpaceX Dragon commercial resupply mission. The Veg-03 plant pillows will contain ‘Tokyo Bekana’ cabbage seeds and lettuce seeds for NASA’s third Veggie plant growth system experiment. The experiment will continue NASA’s deep space plant growth research to benefit the Earth and the agency’s journey to Mars.

Crystal Growth and Other Materials Physical Researches in Space Environment

NASA Astrophysics Data System (ADS)

Pan, Mingxiang

Material science researches in space environment are based on reducing the effects of buoyancy driven transport, the effects of atomic oxygen, radiation, extremes of heat and cold and the ultrahigh vacuum, so as to unveil the underlying fundamental phenomena, lead maybe to new potential materials or new industrial processes and develop space techniques. Currently, research program on materials sciences in Chinese Manned Space Engineering (CMSE) is going on. More than ten projects related to crystal growth and materials processes are selected as candidates to be executed in Shenzhou spacecraft, Tiangong Space Laboratory and Chinese Space Station. In this talk, we will present some examples of the projects, which are being prepared and executed in the near future flight tasks. They are both basic and applied research, from discovery to technology.

The effects of self-management in general education classrooms on the organizational skills of adolescents with ADHD.

PubMed

Gureasko-Moore, Sammi; Dupaul, George J; White, George P

2006-03-01

Self-management procedures have been used in school settings to successfully reduce problem behaviors, as well as to reinforce appropriate behavior. A multiple-baseline across participants design was applied in this study to evaluate the effects of using a self-management procedure to enhance the classroom preparation skills of secondary school students with attention-deficit/ hyperactivity disorder (ADHD). Three male students enrolled in a public secondary school were selected for this study because teacher reports suggested that these students were insufficiently prepared for class and inconsistently completed assignments. The intervention involved training in self-management procedures focusing on the improvement of classroom preparation skills. Following the intervention, the training process was systematically faded. Results were consistent across the 3 participants in enhancing classroom preparation behaviors. Implications for practice and future research are discussed.

Patient participation as dialogue: setting research agendas

PubMed Central

Abma, Tineke A.; Broerse, Jacqueline E. W.

2010-01-01

Abstract Background  Collaboration with patients in healthcare and medical research is an emerging development. We aimed to develop a methodology for health research agenda setting processes grounded in the notion of participation as dialogue. Methods  We conducted seven case studies between 2003 and 2007 to develop and validate a Dialogue Model for patient participation in health research agenda setting. The case studies related to spinal cord injury, neuromuscular diseases, renal failure, asthma/chronic obstructive pulmonary disease, burns, diabetes and intellectual disabilities. Results  The Dialogue Model is grounded in participatory and interactive approaches and has been adjusted on the basis of pilot work. It has six phases: exploration; consultation; prioritization; integration; programming; and implementation. These phases are discussed and illustrated with a case description of research agenda setting relating to burns. Conclusions  The dialogue model appeared relevant and feasible to structure the process of collaboration between stakeholders in several research agenda setting processes. The phase of consultation enables patients to develop their own voice and agenda, and prepares them for the broader collaboration with other stakeholder groups. Challenges include the stimulation of more permanent changes in research, and institutional transitions. PMID:20536537

Space processing economics

NASA Technical Reports Server (NTRS)

Bredt, J. H.

1974-01-01

Two types of space processing operations may be considered economically justified; they are manufacturing operations that make profits and experiment operations that provide needed applied research results at lower costs than those of alternative methods. Some examples from the Skylab experiments suggest that applied research should become cost effective soon after the space shuttle and Spacelab become operational. In space manufacturing, the total cost of space operations required to process materials must be repaid by the value added to the materials by the processing. Accurate estimates of profitability are not yet possible because shuttle operational costs are not firmly established and the markets for future products are difficult to estimate. However, approximate calculations show that semiconductor products and biological preparations may be processed on a scale consistent with market requirements and at costs that are at least compatible with profitability using the Shuttle/Spacelab system.

TiO2 nanocomposites: Preparation, characterization, mechanical and biological properties

NASA Astrophysics Data System (ADS)

Koşarsoy, Gözde; Şen, Elif Hilal; Aksöz, Nilüfer; İde, Semra; Aksoy, Hüsnü

2014-11-01

Some novel nanocomposites, which contain different concentrations of TiO2 nanopowders, were firstly prepared by using marble dust with convenient chemical components. Their nano structures characterized and distributions of the nano-aggregations related with internal structural content of the samples have been determined by X-ray Scattering Methods (SAXS and WAXS) and mechanical properties were determined by using strain-stress measurements to increase their potential usage possibility as building materials in health and research centers. In the last and important part of the study, Candida albicans and Aspergillus niger which are a significant risk to medical patients were used to investigate originally prepared nanostructured samples' photocatalyst effect. During the last part of the study, effect of UV and visible light on photocatalyst nanocomposites were also researched. Heterogeneous photocatalysts can carry out advanced oxidation processes used for an antimicrobial effect on microorganisms. TiO2 nanoparticles as one of heterogeneous photocatalysts have been shown to exhibit strong cytotoxicity when exposed to UV and visible light.

Decomposing mechanisms of abnormal saccade generation in schizophrenia patients: Contributions of volitional initiation, motor preparation, and fixation release.

PubMed

Reuter, Benedikt; Elsner, Björn; Möllers, David; Kathmann, Norbert

2016-11-01

Clinical and theoretical models suggest deficient volitional initiation of action in schizophrenia patients. Recent research provided an experimental model of testing this assumption using saccade tasks. However, inconsistent findings necessitate a specification of conditions on which the deficit may occur. The present study sought to detect mechanisms that may contribute to poor performance. Sixteen schizophrenia patients and 16 healthy control participants performed visually guided and two types of volitional saccade tasks. All tasks varied as to whether the initial fixation stimulus disappeared (fixation stimulus offset) or continued during saccade initiation, and whether a direction cue allowed motor preparation of the specific saccade. Saccade latencies of the two groups were differentially affected by task type, fixation stimulus offset, and cueing, suggesting abnormal volitional saccade generation, fixation release, and motor preparation in schizophrenia. However, substantial performance deficits may only occur if all affected processes are required in a task. © 2016 Society for Psychophysiological Research.

Unmanned Aerial Vehicle - A Tool for Acquiring Spatial Data for Research and Commercial Purposes. New Course in the Geography and Cartography Curriculum in Higher Education

NASA Astrophysics Data System (ADS)

Jeziorska, J.

2014-04-01

This paper describes the syllabus for the innovative course "Unmanned aerial observations of Terrain" introduced to the curriculum by the Department of Geoinformatics and Cartography of the University of Wroclaw (Poland). It indicates the objectives of the new subject, its didactic purpose, methods used in the teaching process, specifications of teaching materials, and the knowledge and skills that students are expected to acquire. Finally, it presents the content of the course and description of lesson units. The subject will be obligatory for graduate students majoring in Geography, who are participants in the Geoinformatics and Cartography Master's program. Thirty-eight hours in a summer semester has been earmarked for the course. That includes 30 hours of instructor-guided laboratory and fieldtrip work, and 8 hours of individual work. The course aims to prepare future geographers to conduct a multi-step process that includes defining the purpose of using UAV in light of the chosen research problem, preparation of the mission, flight execution; geoprocessing of acquired aerial imagery; generation of cartomertic final products, and analysis of outcomes in order to answer the initially asked research question. This comprehensive approach will allow students, future experts in the field of geoinformatics and cartography, to gain the skills needed to acquire spatial data using an UAV, process them, and apply the results of their analysis in practice.

Iron-carbon composites for the remediation of chlorinated hydrocarbons

NASA Astrophysics Data System (ADS)

Sunkara, Bhanu Kiran

This research is focused on engineering submicron spherical carbon particles as effective carriers/supports for nanoscale zerovalent iron (NZVI) particles to address the in situ remediation of soil and groundwater chlorinated contaminants. Chlorinated hydrocarbons such as trichloroethylene (TCE) and tetrachloroethylene (PCE) form a class of dense non-aqueous phase liquid (DNAPL) toxic contaminants in soil and groundwater. The in situ injection of NZVI particles to reduce DNAPLs is a potentially simple, cost-effective, and environmentally benign technology that has become a preferred method in the remediation of these compounds. However, unsupported NZVI particles exhibit ferromagnetism leading to particle aggregation and loss in mobility through the subsurface. This work demonstrates two approaches to prepare carbon supported NZVI (iron-carbon composites) particles. The objective is to establish these iron-carbon composites as extremely useful materials for the environmental remediation of chlorinated hydrocarbons and suitable materials for the in situ injection technology. This research also demonstrates that it is possible to vary the placement of iron nanoparticles either on the external surface or within the interior of carbon microspheres using a one-step aerosol-based process. The simple process of modifying iron placement has significant potential applications in heterogeneous catalysis as both the iron and carbon are widely used catalysts and catalyst supports. Furthermore, the aerosol-based process is applied to prepare new class of supported catalytic materials such as carbon-supported palladium nanoparticles for ex situ remediation of contaminated water. The iron-carbon composites developed in this research have multiple functionalities (a) they are reactive and function effectively in reductive dehalogenation (b) they are highly adsorptive thereby bringing the chlorinated compound to the proximity of the reactive sites and also serving as adsorption materials for decontamination (c) they are of the optimal size for transport through sediments (d) they have amphiphilic chemical functionalities that help stabilize them when they reach the DNAPL target zones. Finally, the iron-carbon composite microspheres prepared through aerosol-based process can used for in situ injection technology as the process is conductive to scale-up and the materials are environmentally benign.

Processing of meteorological data with ultrasonic thermoanemometers

NASA Astrophysics Data System (ADS)

Telminov, A. E.; Bogushevich, A. Ya.; Korolkov, V. A.; Botygin, I. A.

2017-11-01

The article describes a software system intended for supporting scientific researches of the atmosphere during the processing of data gathered by multi-level ultrasonic complexes for automated monitoring of meteorological and turbulent parameters in the ground layer of the atmosphere. The system allows to process files containing data sets of temperature instantaneous values, three orthogonal components of wind speed, humidity and pressure. The processing task execution is done in multiple stages. During the first stage, the system executes researcher's query for meteorological parameters. At the second stage, the system computes series of standard statistical meteorological field properties, such as averages, dispersion, standard deviation, asymmetry coefficients, excess, correlation etc. The third stage is necessary to prepare for computing the parameters of atmospheric turbulence. The computation results are displayed to user and stored at hard drive.

Exploring Operational Test and Evaluation of Unmanned Aircraft Systems: A Qualitative Case Study

NASA Astrophysics Data System (ADS)

Saliceti, Jose A.

The purpose of this qualitative case study was to explore and identify strategies that may potentially remedy operational test and evaluation procedures used to evaluate Unmanned Aircraft Systems (UAS) technology. The sample for analysis consisted of organizations testing and evaluating UASs (e.g., U.S. Air Force, U.S. Navy, U.S. Army, U.S. Marine Corps, U.S. Coast Guard, and Customs Border Protection). A purposeful sampling technique was used to select 15 subject matter experts in the field of operational test and evaluation of UASs. A questionnaire was provided to participants to construct a descriptive and robust research. Analysis of responses revealed themes related to each research question. Findings revealed operational testers utilized requirements documents to extrapolate measures for testing UAS technology and develop critical operational issues. The requirements documents were (a) developed without the contribution of stakeholders and operational testers, (b) developed with vague or unrealistic measures, and (c) developed without a systematic method to derive requirements from mission tasks. Four approaches are recommended to develop testable operational requirements and assist operational testers: (a) use a mission task analysis tool to derive requirements for mission essential tasks for the system, (b) exercise collaboration among stakeholders and testers to ensure testable operational requirements based on mission tasks, (c) ensure testable measures are used in requirements documents, and (d) create a repository list of critical operational issues by mission areas. The preparation of operational test and evaluation processes for UAS technology is not uniform across testers. The processes in place are not standardized, thus test plan preparation and reporting are different among participants. A standard method to prepare and report UAS technology should be used when preparing and reporting on UAS technology. Using a systematic process, such as mission-based test design, resonated among participants as an analytical method to link UAS mission tasks and measures of performance to the capabilities of the system under test when developing operational test plans. Further research should examine system engineering designs for system requirements traceability matrix of mission tasks and subtasks while using an analysis tool that adequately evaluates UASs with an acceptable level of confidence in the results.

Analysis on Inclusion of Social Studies Economy Concepts in Coursebooks

ERIC Educational Resources Information Center

Seker, Mustafa; Osmanoglu, Ahmet Emin

2015-01-01

Having an efficient and satisfactory economy education may enable an individual to actively participate in decision making process about economy-related issues. This is very important for democratic societies. This research aims to search methods and levels of teaching "economy" concepts prepared for Turkey 2005 Social Studies Program in…

Moon Technology for Skin Care

NASA Technical Reports Server (NTRS)

1988-01-01

Estee Lauder uses digital image analyzer and software based on NASA lunar research in evaluation of cosmetic products for skincare. Digital image processing brings out subtleties otherwise undetectable, and allows better determination of product's effectiveness. Technique allows Estee Lauder to quantify changes in skin surface form and structure caused by application of cosmetic preparations.

Making Schools Safer in South Africa: An Antihomophobic Bullying Educational Resource

ERIC Educational Resources Information Center

Reygan, Finn

2016-01-01

The limited research indicates that homophobia is widespread in South African schools and that schools are ill-prepared to challenge homophobic bullying. In this context, using Kumashiro's antioppressive educational framework, the author outlines the process of developing an antihomophobic educational resource for use in South African schools, its…

Preparation and characterization of sorghum flour with increased resistant starch content

USDA-ARS?s Scientific Manuscript database

The primary objective of this research was to develop an effective process to increase the resistant starch content of sorghum flour. A secondary objective was to investigate the role of the sorghum proteins on starch digestibility. Samples of white sorghum flour (28.9% amylose content) with differe...

Peering into the secrets of food and agricultural co-products

USDA-ARS?s Scientific Manuscript database

Scanning electron microscopy is a valuable tool for understanding food contamination and for directing product development of food and industrial products. The current trend in food research is to produce foods that are fast to prepare and/or ready to eat. At the same time, these processed foods mus...

Teacher Inquiry from Knowledge to Knowledges

ERIC Educational Resources Information Center

Kiss, Katherine L.; Townsend, Jane S.

2012-01-01

The literature indicates that teacher educators have a responsibility to prepare new teachers philosophically and practically as reflective "researchers" who are in the habit of systematic, active, and goal-directed problem-posing and are attentive to the processes in which they are immersed (Braun & Crumpler, 2004; Cochran-Smith-Lytle, 1999;…

Study Guide for TCT in Science.

ERIC Educational Resources Information Center

Clark, Gene

This study guide was developed for individuals preparing to take the Georgia Teacher Certification Test (TCT) in science. Content objectives of the test are listed and encompass: (1) scientific processes, research, and classification; (2) earth sciences; (3) characteristics and properties of matter, energy, and chemical change; (4) biology of life…

AFRC2017-0076-1

NASA Image and Video Library

2017-04-04

NASA Armstrong’s Mission Control Center, or MCC, is where culmination of all data-gathering occurs. Engineers, flight controllers and researchers monitor flights and missions as they are carried out. Data and video run through the MCC and are recorded, displayed and archived. Data is then processed and prepared for post-flight analysis.

Ramifications of welding a soleplate to a precast metal insert of a prestressed single-tee beam.

DOT National Transportation Integrated Search

1976-01-01

A model of the bearing assembly specified on the plans for the bridges being constructed in Norton, Virginia, was prepared in the laboratory at the Research Council. The shielded metal-arc welding process was used to weld the soleplate to the metal i...

School District Information Technology Disaster Recovery Planning: An Explanatory Case Study

ERIC Educational Resources Information Center

Gray, Shaun L.

2017-01-01

Despite research and practitioner articles outlining the importance information technology disaster plans (ITDRPs) to organizational success, barriers have impeded the process of disaster preparation for Burlington County New Jersey school districts. The purpose of this explanatory qualitative case study was to understand how technology leader…

Measuring research progress in photovoltaics

NASA Technical Reports Server (NTRS)

Jackson, B.; Mcguire, P.

1986-01-01

The role and some results of the project analysis and integration function in the Flat-plate Solar Array (FSA) Project are presented. Activities included supporting the decision-making process, preparation of plans for project direction, setting goals for project activities, measuring progress within the project, and the development and maintenance of analytical models.

Best Instructional Practices for Developing Student Choreographers

ERIC Educational Resources Information Center

Humphreys, Kathryn; Kimbrell, Sinéad

2013-01-01

Drawing on more than two decades of experience refining this teaching process, as well as insights from two consecutive research studies of Hubbard Street Dance Chicago's education work, this article presents best practice strategies for teaching choreography to elementary students in schools. The article outlines the rationale behind the Prepare,…

Multistage, Multiband and sequential imagery to identify and quantify non-forest vegetation resources

NASA Technical Reports Server (NTRS)

Driscoll, R. S.

1971-01-01

Analysis and recognition processing of multispectral scanner imagery for plant community classification and interpretations of various film-filter-scale aerial photographs are reported. Data analyses and manuscript preparation of research on microdensitometry for plant community and component identification and remote estimates of biomass are included.

Case Study of the Innovation Process Characterizing the Development of the Three-Way Catalytic Converter System

DOT National Transportation Integrated Search

1979-11-01

This report traces the development of the three-way catalytic converter system from its origins in automaker and chemical firm research in the 1950s, to present plans preparing the system to be the auto exhaust emission control device most widely use...

Fossil energy program

NASA Astrophysics Data System (ADS)

McNeese, L. E.

1981-12-01

The progress made during the period from July 1 through September 30 for the Oak Ridge National Laboratory research and development projects in support of the increased utilization of coal and other fossil fuels as sources of clean energy is reported. The following topics are discussed: coal conversion development, chemical research and development, materials technology, fossil energy materials program, liquefaction projects, component development, process analysis, environmental control technology, atmospheric fluidized bed combustion, underground coal gasification, coal preparation and waste utilization.

Small Business Innovation Research. Program solicitation. Closing date: July 22, 1988

NASA Technical Reports Server (NTRS)

1988-01-01

The sixth annual Small Business Innovation Research (SBIR) solicitation by NASA, describes the program, identifies eligibility requirements, outlines proposal preparation and submission requirements, describes the proposal evaluation and award selection process, and provides other information to assist those interested in participating in the SBIR program. It also identifies in Section 8.0 and Appendix D, the specific technical topics and subtopics in which SBIR Phase 1 proposals are solicited in 1988.

Using Place-Based Independent Class Projects as a Means to Hone Research Skills and Prepare a Future Geospatial Workforce

NASA Astrophysics Data System (ADS)

Prakash, A.; Gens, R.; Cristobal, J.; Waigl, C. F.; Balazs, M. S.; Graham, P. R.; Butcher, C. E.; Sparrow, E. B.

2015-12-01

It is never too early to bring in your own research into teaching. Considerable efforts have been made globally to introduce STEM research themes in K12 environments. These efforts a laudable as they help to create STEM identity in students and get students excited to pursue higher education. The task of a post-secondary educator is to build on that excitement and ensure that the students who enter higher education come out knowledgeable, skilled, and employable. At the University of Alaska Fairbanks we have structured our geospatial curricula to include place-based, independent research projects in several semester-long classes. These class-projects serve as mini capstone research experiences that take a student through the entire process of research including: identifying a problem or need; building a hypothesis; formulating the science question; searching, acquiring, and processing data; analyzing and interpreting the research results; and presenting the outcomes in written and oral format to a peer group. Over a decade of experience has shown that students tend to engage and perform well when the research addresses an authentic problem they can relate to and take ownership of. Over 150 student-lead class projects using a variety of freely available datasets have contributed not only to preparing the future workforce, but also to enhancing the research profile of UAF. We extended the same model to a summer internship program where graduate students who have gone through the experience of an in-class research project serve as mentors for undergraduate interns. Even the condensed time frame yields positive outcomes including joint publications between faculty, staff, graduate students and undergraduate students in the peer-reviewed literature.

Robot-Based High-Throughput Engineering of Alcoholic Polymer: Fullerene Nanoparticle Inks for an Eco-Friendly Processing of Organic Solar Cells.

PubMed

Xie, Chen; Tang, Xiaofeng; Berlinghof, Marvin; Langner, Stefan; Chen, Shi; Späth, Andreas; Li, Ning; Fink, Rainer H; Unruh, Tobias; Brabec, Christoph J

2018-06-27

Development of high-quality organic nanoparticle inks is a significant scientific challenge for the industrial production of solution-processed organic photovoltaics (OPVs) with eco-friendly processing methods. In this work, we demonstrate a novel, robot-based, high-throughput procedure performing automatic poly(3-hexylthio-phene-2,5-diyl) and indene-C 60 bisadduct nanoparticle ink synthesis in nontoxic alcohols. A novel methodology to prepare particle dispersions for fully functional OPVs by manipulating the particle size and solvent system was studied in detail. The ethanol dispersion with a particle diameter of around 80-100 nm exhibits reduced degradation, yielding a power conversion efficiency of 4.52%, which is the highest performance reported so far for water/alcohol-processed OPV devices. By successfully deploying the high-throughput robot-based approach for an organic nanoparticle ink preparation, we believe that the findings demonstrated in this work will trigger more research interest and effort on eco-friendly industrial production of OPVs.

Preparation and Characterization of NiMo/Al2O3Catalyst for Hydrocracking Processing

NASA Astrophysics Data System (ADS)

Widiyadi, Aditya; Guspiani, Gema Adil; Riady, Jeffry; Andreanto, Rikky; Chaiunnisa, Safina Dea; Widayat

2018-02-01

Hydrocracking is a chemical process used in petroleum refineries for converting high boiling hydrocarbons in petroleum crude oils to more valuable lower boiling products such as gasoline, kerosene, and diesel oil that operate at high temperature and pressure. Catalyst was used in hydrocracking to reduce temperature and pressure. Hydrocracking catalyst are composed of active components and support. Alumina is widely used in hydrocracking process as catalyst support due to its high surface area, high thermal stability, and low prices. The objective of this research was preparated NiMo/Al2O3 catalyst that used as hydrocracking catalyst. Catalyst was synthesized by wetness impregnation method and simple heating method with various kind of Al2O3. The physicochemical properties of catalyst were investigated by X-ray diffraction (XRD) to determine type of crystal and scanning electron microscopy (SEM) to determine morphology of the catalyst. The NiMo/Al2O3 catalyst prepared by aluminium potassium sulfate dodecahydrate exhibited the highest crystallinity of 90.23% and it is clear that MoO3 and NiO crystallites are highly dispersed on the NiMo/Al2O3 catalyst which indicates as the best catalyst. The catalytic activity in hydrocracking process was successfully examined to convert fatty acid into hydrocarbon.

28 CFR 543.11 - Legal research and preparation of legal documents.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 28 Judicial Administration 2 2014-07-01 2014-07-01 false Legal research and preparation of legal... INSTITUTIONAL MANAGEMENT LEGAL MATTERS Inmate Legal Activities § 543.11 Legal research and preparation of legal... program or work assignment), to do legal research and to prepare legal documents. Where practical, the...

28 CFR 543.11 - Legal research and preparation of legal documents.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 28 Judicial Administration 2 2011-07-01 2011-07-01 false Legal research and preparation of legal... INSTITUTIONAL MANAGEMENT LEGAL MATTERS Inmate Legal Activities § 543.11 Legal research and preparation of legal... program or work assignment), to do legal research and to prepare legal documents. Where practical, the...

28 CFR 543.11 - Legal research and preparation of legal documents.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Legal research and preparation of legal... INSTITUTIONAL MANAGEMENT LEGAL MATTERS Inmate Legal Activities § 543.11 Legal research and preparation of legal... program or work assignment), to do legal research and to prepare legal documents. Where practical, the...

28 CFR 543.11 - Legal research and preparation of legal documents.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 28 Judicial Administration 2 2012-07-01 2012-07-01 false Legal research and preparation of legal... INSTITUTIONAL MANAGEMENT LEGAL MATTERS Inmate Legal Activities § 543.11 Legal research and preparation of legal... program or work assignment), to do legal research and to prepare legal documents. Where practical, the...

28 CFR 543.11 - Legal research and preparation of legal documents.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 28 Judicial Administration 2 2013-07-01 2013-07-01 false Legal research and preparation of legal... INSTITUTIONAL MANAGEMENT LEGAL MATTERS Inmate Legal Activities § 543.11 Legal research and preparation of legal... program or work assignment), to do legal research and to prepare legal documents. Where practical, the...

Continued reduction and analysis of data from the Dynamics Explorer Plasma Wave Instrument

NASA Technical Reports Server (NTRS)

Gurnett, Donald A.; Weimer, Daniel R.

1994-01-01

The plasma wave instrument on the Dynamics Explorer 1 spacecraft provided measurements of the electric and magnetic components of plasma waves in the Earth's magnetosphere. Four receiver systems processed signals from five antennas. Sixty-seven theses, scientific papers and reports were prepared from the data generated. Data processing activities and techniques used to analyze the data are described and highlights of discoveries made and research undertaken are tabulated.

NASA Oceanic Processes Program

NASA Technical Reports Server (NTRS)

1986-01-01

This, the Sixth Annual Report for NASA's Oceanic Processes Program, provides an overview of recent accomplishments, present activities, and future plans. Although the report was prepared for Fiscal Year 1985 (October 1, 1984 to September 30, 1985), the period covered by the Introduction extends into June 1986. Sections following the Introduction provide summaries of current flight projects and definition studies, brief descriptions of individual research activities, and a bibliography of refereed journal articles appearing within the past two years.

Processing research and development of 'green' polymer nanoclay composites containing a polyhydroxybutyrate, vinyl acetates, and modified montmorillonite clay

NASA Astrophysics Data System (ADS)

McKirahan, James N., Jr.

The purpose of this research was to determine the feasibility of direct melt-blending (intercalation) montmorillonite nanoclay to polyhydroxybutyrate along with vinyl acetate, at different weight percentages, to enhance plasticization using typical plastic processing equipment and typical processing methodology. The purpose was to determine and compare the specific mechanical properties of tensile strength and flexural strength developed as a result from this processing. Single screw and twin screw extrusion, Banbury mixer compounding, and compression molding were used to intercalate montmorillonite, and for sample preparation purposes, to test tensile and flexural strength of the resultant polymer clay nanocomposites (PCN). Results indicate Polyhydroxybutyrate and Ethylene vinyl acetate, and weight percentages of 70%, 65% and 60% PHB, and 15%, 20%, and 25% of EVA, respectively, influenced mechanical properties. The resultant materials remained in a mostly amorphous state. The nanoclay, at specific weight percentage of 10%, acted as an antimicrobial and preservative for the materials produced during the research. The intention of the research was to promote knowledge and understanding concerning these materials and processes so technology transfer regarding the use, mechanical properties, manufacture, and process ability of these bio-friendly materials to academia, industry, and society can occur.

In search of how people change. Applications to addictive behaviors.

PubMed

Prochaska, J O; DiClemente, C C; Norcross, J C

1992-09-01

How people intentionally change addictive behaviors with and without treatment is not well understood by behavioral scientists. This article summarizes research on self-initiated and professionally facilitated change of addictive behaviors using the key trans-theoretical constructs of stages and processes of change. Modification of addictive behaviors involves progression through five stages--pre-contemplation, contemplation, preparation, action, and maintenance--and individuals typically recycle through these stages several times before termination of the addiction. Multiple studies provide strong support for these stages as well as for a finite and common set of change processes used to progress through the stages. Research to date supports a trans-theoretical model of change that systematically integrates the stages with processes of change from diverse theories of psychotherapy.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salama, A.; Mikhail, M.

Comprehensive software packages have been developed at the Western Research Centre as tools to help coal preparation engineers analyze, evaluate, and control coal cleaning processes. The COal Preparation Software package (COPS) performs three functions: (1) data handling and manipulation, (2) data analysis, including the generation of washability data, performance evaluation and prediction, density and size modeling, evaluation of density and size partition characteristics and attrition curves, and (3) generation of graphics output. The Separation ChARacteristics Estimation software packages (SCARE) are developed to balance raw density or size separation data. The cases of density and size separation data are considered. Themore » generated balanced data can take the balanced or normalized forms. The scaled form is desirable for direct determination of the partition functions (curves). The raw and generated separation data are displayed in tabular and/or graphical forms. The computer softwares described in this paper are valuable tools for coal preparation plant engineers and operators for evaluating process performance, adjusting plant parameters, and balancing raw density or size separation data. These packages have been applied very successfully in many projects carried out by WRC for the Canadian coal preparation industry. The software packages are designed to run on a personal computer (PC).« less

Polyferric sulphate: preparation, characterisation and application in coagulation experiments.

PubMed

Zouboulis, A I; Moussas, P A; Vasilakou, F

2008-07-15

The process of coagulation is a core environmental protection technology, which is mainly used in the water or wastewater treatment facilities. Research is now focused on the development of inorganic pre-polymerised coagulants. A characteristic example is PFS (polyferric sulphate), a relatively new pre-polymerised inorganic coagulant with high cationic charge. In this paper, the role of major parameters, including temperature, types of chemical reagents, ratio r=[OH]/[Fe], rate of base addition in the preparation stages of PFS were investigated. Furthermore, the prepared PFS was characterised based on typical properties, such as the percentage of the polymerised iron present in the compound, z-potential, pH, etc. Moreover, dynamics of coagulation process were examined by means of the Photometric Dispersion Analyzer (PDA). Finally, the coagulation efficiency of PFS in treating kaolin suspension and biologically pre-treated wastewater was evaluated in comparison with the respective conventional coagulant agent. The results indicate that certain parameters, such as the r value, the rate of base addition and the duration and temperature of the polymerisation stage, significantly affected the properties of the PFS. Additionally, the prepared PFS polymerised coagulants exhibit a significantly better coagulation performance than the respective non-polymerised one, i.e. ferric sulphate.

Optimization of formulation and processing of Moringa oleifera and spirulina complex tablets.

PubMed

Zheng, Yi; Zhu, Fan; Lin, Dan; Wu, Jun; Zhou, Yichao; Mark, Bohn

2017-01-01

Objective: To prepare a more comprehensive nutrition, more balanced proportion of natural nutritional supplement tablets with Moringa oleifera leaves and spirulina the two nutrients which have complementary natural food ingredients. Method: On the basis of research M. oleifera leaves with spirulina nutrient composition was determined on M. oleifera leaves and spirulina ratio of raw materials, and the choice of microcrystalline cellulose, sodium salt of caboxy methyl cellulose(CMC),magnesium stearate excipient, through single factor and orthogonal experiment, selecting the best formula tablets prepared by powder direct compression technology, for preparation of M. oleifera and spirulina complex tablets. Results: The best ratio of raw material for the M. oleifera leaves powder: spirulina powder was 7:3, the best raw materials for the tablet formulation was 88.5%, 8.0% microcrystalline cellulose, CMC 2.0%, stearin magnesium 1.5%, the optimum parameters for the raw material crushing 200-300 mesh particle size, moisture content of 7%, tableting pressure 40 kN. Conclusion: Through formulation and process optimization, we can prepare more comprehensive and balanced nutrition M. oleifera and spirulina complex tablets, its sheet-shaped appearance, piece weight variation, hardness, friability, disintegration and other indicators have reached the appropriate quality requirements.

[Memorandum IV: Theoretical and Normative Grounding of Health Services Research].

PubMed

Baumann, W; Farin, E; Menzel-Begemann, A; Meyer, T

2016-05-01

With Memoranda and other initiatives, the German Network for Health Service Research [Deutsches Netzwerk Versorgungsforschung e.V. (DNVF)] is fostering the methodological quality of care research studies for years. Compared to the standards of empirical research, questions concerning the role and function of theories, theoretical approaches and scientific principles have not been taken up on its own. Therefore, the DNVF e.V. has set up a working group in 2013, which was commissioned to prepare a memorandum on "theories in health care research". This now presented memorandum will primarily challenge scholars in health care services research to pay more attention to questions concerning the theoretical arsenal and the background assumptions in the research process. The foundation in the philosophy of science, the reference to normative principles and the theory-bases of the research process are addressed. Moreover, the memorandum will call on to advance the theorizing in health services research and to strengthen not empirical approaches, research on basic principles or studies with regard to normative sciences and to incorporate these relevant disciplines in health services research. Research structures and funding of health services research needs more open space for theoretical reflection and for self-observation of their own, multidisciplinary research processes. © Georg Thieme Verlag KG Stuttgart · New York.

Advanced Curation Activities at NASA: Preparing to Receive, Process, and Distribute Samples Returned from Future Missions

NASA Technical Reports Server (NTRS)

McCubbin, Francis M.; Zeigler, Ryan A.

2017-01-01

The Astromaterials Acquisition and Curation Office (henceforth referred to herein as NASA Curation Office) at NASA Johnson Space Center (JSC) is responsible for curating all of NASA's extraterrestrial samples. Under the governing document, NASA Policy Directive (NPD) 7100.10F JSC is charged with curation of all extraterrestrial material under NASA control, including future NASA missions. The Directive goes on to define Curation as including documentation, preservation, preparation, and distribution of samples for research, education, and public outreach. Here we briefly describe NASA's astromaterials collections and our ongoing efforts related to enhancing the utility of our current collections as well as our efforts to prepare for future sample return missions. We collectively refer to these efforts as advanced curation.

Polymer Infiltration Studies

NASA Technical Reports Server (NTRS)

Marchello, Joseph M.

1993-01-01

Significant progress has been made on the preparation of carbon fiber composites using advanced polymer resins during the past three months. Current and ongoing research activities reported herein include: (1) Prepregger Hot Sled Operation; (2) Ribbonizing Powder-Impregnated Towpreg; (3) Textile Composites from Powder-Coated Towpreg: Role of Bulk Factor; and (4) Powder Curtain Prepreg Process. During the coming months research will be directed toward further development of the new powder curtain prepregging method and on ways to customize dry powder towpreg for textile and robotic applications in aircraft part fabrication. Studies of multi-tow powder prepregging and ribbon preparation will be conducted in conjunction with continued development of prepegging technology and the various aspects of composite part fabrication using customized towpreg. Also, work will continue on the analysis of the new solution prepegger.

Writing implementation research grant proposals: ten key ingredients

PubMed Central

2012-01-01

Background All investigators seeking funding to conduct implementation research face the challenges of preparing a high-quality proposal and demonstrating their capacity to conduct the proposed study. Applicants need to demonstrate the progressive nature of their research agenda and their ability to build cumulatively upon the literature and their own preliminary studies. Because implementation science is an emerging field involving complex and multilevel processes, many investigators may not feel equipped to write competitive proposals, and this concern is pronounced among early stage implementation researchers. Discussion This article addresses the challenges of preparing grant applications that succeed in the emerging field of dissemination and implementation. We summarize ten ingredients that are important in implementation research grants. For each, we provide examples of how preliminary data, background literature, and narrative detail in the application can strengthen the application. Summary Every investigator struggles with the challenge of fitting into a page-limited application the research background, methodological detail, and information that can convey the project’s feasibility and likelihood of success. While no application can include a high level of detail about every ingredient, addressing the ten ingredients summarized in this article can help assure reviewers of the significance, feasibility, and impact of the proposed research. PMID:23062065

A research agenda for bridging the 'quality chasm.'.

PubMed

Fernandopulle, Rushika; Ferris, Timothy; Epstein, Arnold; McNeil, Barbara; Newhouse, Joseph; Pisano, Gary; Blumenthal, David

2003-01-01

Realizing the vision of the IOM's landmark report, Crossing the Quality Chasm, will require new knowledge to support new policy and management. This paper lays out a research agenda that must be pursued if the health care system is to bridge the quality chasm. Based on a consensus process involving leading health care researchers and authorities, the paper highlights knowledge gaps and research directions in five areas identified by the Quality Chasm report as critical to its goals of building organizational supports for change; applying evidence to health care delivery; developing information technology; aligning payment policies with quality improvement; and preparing the workforce.

Advances in studying phasic dopamine signaling in brain reward mechanisms

PubMed Central

Wickham, Robert J.; Solecki, Wojciech; Rathbun, Liza R.; Neugebauer, Nichole M.; Wightman, R. Mark; Addy, Nii A.

2013-01-01

The last sixty years of research have provided extraordinary advances of our knowledge of the reward system. Since its initial discovery as a neurotransmitter by Carlsson and colleagues (Carlsson et al., 1957), dopamine (DA) has emerged as an important mediator of reward processing. As a result, a number of electrochemical techniques have been developed to directly measure DA levels in the brain using various preparations. Many of these techniques and preparations differ in the types of questions that they can address. Together, these techniques have begun to elucidate the complex roles of tonic and phasic DA signaling in reward processing and in addiction. In this review, we will first provide a guide for the most commonly used electrochemical methods for DA detection and describe their utility in furthering our knowledge about DA's role in reward and addiction. Second, we will review the value of common in vitro and in vivo preparations and describe their ability to address different types of questions. Last, we will review recent data that has provided new insight of the mechanisms of in vivo phasic DA signaling and its role in reward processing and reward-mediated behavior. PMID:23747914

A computer-based education intervention to enhance surrogates' informed consent for genomics research.

PubMed

Shelton, Ann K; Freeman, Bradley D; Fish, Anne F; Bachman, Jean A; Richardson, Lloyd I

2015-03-01

Many research studies conducted today in critical care have a genomics component. Patients' surrogates asked to authorize participation in genomics research for a loved one in the intensive care unit may not be prepared to make informed decisions about a patient's participation in the research. To examine the effectiveness of a new, computer-based education module on surrogates' understanding of the process of informed consent for genomics research. A pilot study was conducted with visitors in the waiting rooms of 2 intensive care units in a Midwestern tertiary care medical center. Visitors were randomly assigned to the experimental (education module plus a sample genomics consent form; n = 65) or the control (sample genomics consent form only; n = 69) group. Participants later completed a test on informed genomics consent. Understanding the process of informed consent was greater (P = .001) in the experimental group than in the control group. Specifically, compared with the control group, the experimental group had a greater understanding of 8 of 13 elements of informed consent: intended benefits of research (P = .02), definition of surrogate consenter (P= .001), withdrawal from the study (P = .001), explanation of risk (P = .002), purpose of the institutional review board (P = .001), definition of substituted judgment (P = .03), compensation for harm (P = .001), and alternative treatments (P = .004). Computer-based education modules may be an important addition to conventional approaches for obtaining informed consent in the intensive care unit. Preparing patients' family members who may consider serving as surrogate consenters is critical to facilitating genomics research in critical care. ©2015 American Association of Critical-Care Nurses.

Investigations of fungal fruiting bodies as biosorbents for the removal of heavy metals from industrial processing streams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muraleedharan, T.R.; Venkobachar, C.; Leela, I.

1994-09-01

The revival of interest in biotechnology has fueled research in many sectors of environmental biotechnology. The present paper describes research utilizing adsorbents prepared from wood-rotting mushrooms growing wild in tropical forests. Nine species of mushrooms were screened using copper(II) as the model adsorbate. While may species showed excellent potential, comparable to biosorbents reported in literature, Ganodernma lucidum emerged as the best biosorbent. This biosorbent was further developed for use in a packed-bed bioreactor for treatment of rare earth processing effluents. Electron paramagnetic studies confirmed that adsorption is by chemical binding to the biosorbent.

Problem of Mistakes in Databases, Processing and Interpretation of Observations of the Sun. I.

NASA Astrophysics Data System (ADS)

Lozitska, N. I.

In databases of observations unnoticed mistakes and misprints could occur at any stage of observation, preparation and processing of databases. The current detection of errors is complicated by the fact that the works of observer, databases compiler and researcher were divided. Data acquisition from a spacecraft requires the greater amount of researchers than for ground-based observations. As a result, the probability of errors is increasing. Keeping track of the errors on each stage is very difficult, so we use of cross-comparison of data from different sources. We revealed some misprints in the typographic and digital results of sunspot group area measurements.

[Computer aided design and manufacture of the porcelain fused to metal crown].

PubMed

Nie, Xin; Cheng, Xiaosheng; Dai, Ning; Yu, Qing; Hao, Guodong; Sun, Quanping

2009-04-01

In order to satisfy the current demand for fast and high-quality prosthodontics, we have carried out a research in the fabrication process of the porcelain fused to metal crown on molar with CAD/CAM technology. Firstly, we get the data of the surface mesh on preparation teeth through a 3D-optical grating measuring system. Then, we reconstruct the 3D-model crown with the computer-aided design software which was developed by ourselves. Finally, with the 3D-model data, we produce a metallic crown on a high-speed CNC carving machine. The result has proved that the metallic crown can match the preparation teeth ideally. The fabrication process is reliable and efficient, and the restoration is precise and steady in quality.

Online friends, offline loved ones, and full-time media: young adult "mass personal" use of communication resources for informational and emotional support.

PubMed

Love, Brad; Donovan, Erin E

2014-06-01

As Web 2.0 technologies proliferate, patient education is changing dramatically. Information about prevention and survivorship arrives from a mix of sources. The present manuscript describes a study to shed light on how young adults (YAs) affected by cancer manage the digital world. Our investigation was guided by a research question asking how young adults affected by cancer engage in communication work in an environment of mass personal communication. The sample for this research consisted of 500 posts comprising 50 complete threads from an online support community for young adults affected by cancer. Threads were purposively sampled in a multi-stage process. Researchers used constant comparison to define themes, examining text in increments. Individuals harnessed assets of various communication tools for the purposes of message preparation and credibility checking. YAs demonstrated the multi-channel way they move between channels for different purposes, driven by preparation for future interactions. The result is a process that allows co-creation of knowledge in a trusted community. Findings indicate that completing communication work through multiple channels in a deliberate and savvy way is normal for YAs, particularly for message preparation and credibility checking. The multidirectional nature of digital tools plays an important role for YAs, as interactive resources appear to be the first or second stop for information after key events in the cancer trajectory. Results from this study are important as guidance to help manage the volume and depth of information common to the cancer experience in the Web 2.0 world.

KSC-06pd0969

NASA Image and Video Library

2006-06-01

KENNEDY SPACE CENTER, FLA. - Inside the Space Station Processing Facility at NASA's Kennedy Space Center, an overhead crane carries the Columbus module toward a work stand. Columbus is the European Space Agency's research laboratory for the International Space Station. Once on the work stand , it will be prepared for delivery to the space station on a future space shuttle mission. Columbus will expand the research facilities of the station and provide researchers with the ability to conduct numerous experiments in the area of life, physical and materials sciences. Photo credit: NASA/Jim Grossmann

KSC-06pd0968

NASA Image and Video Library

2006-06-01

KENNEDY SPACE CENTER, FLA. - Inside the Space Station Processing Facility at NASA's Kennedy Space Center, an overhead crane carries the Columbus module away from its transportation canister. Columbus is the European Space Agency's research laboratory for the International Space Station. The module is being moved to a work stand to prepare it for delivery to the space station on a future space shuttle mission. Columbus will expand the research facilities of the station and provide researchers with the ability to conduct numerous experiments in the area of life, physical and materials sciences. Photo credit: NASA/Jim Grossmann

Experiments Related to the Fabrication of Carbon Fiber/AMB-21 Polyimide Composite Tubes Using the RTM Process

NASA Technical Reports Server (NTRS)

Exum, Daniel

1996-01-01

AMB-21 is a new polymer developed by Mr. Ray Vannucci, NASA, LeRC as a noncarcinogenic polyimide matrix which may be suitable for fabricating composite parts by the Resin Transfer Modeling (RTM) process. The polyimide for this project was prepared at the Center of Composite Materials Research at N.C. A&T State University because it is not currently an item of commerce. The RTM process is especially suitable for producing geometrically complex composite parts at a low cost. Because of the high melting point and very high viscosity at the time of processing, polyimides have not been extensively used in the RTM process. The process for preparing AMB-21 as well as the process for fabricating composite plates will be described. The basic fabrication process consists of injecting a solvent solution of AMP-21 into a carbon fiber preform, evaporating the solvent, imidizing the polyimide, and vacuum/compression modeling the impregnated preform. All the above molding steps are preformed in a specially designed RTM mold which will be described. The results of this process have been inconsistent. Where as some experiments have resulted in a reasonably sound panels, others have not. Further refinements of the process are required to establish a reliable process.

[Research of preparation craft of Danshen phenolic acid fast release unit in multi-drug delivery system of Tongmai micro-pellets].

PubMed

Chen, Bin; Xiao, Wei; Jia, Xiao-Bin; Huang, Yang

2012-07-01

To prepare Danshen phenolic acid fast release micro-pellets and study its preparation craft. The factors which could impact yield, extrude shaping, dissolution of Danshen phenolic acid micro-pellets such as wetting agent, drug loading dose, adjuvant, lactose dose, disintegrant, CMS-Na dose and wetting agent dose was investigated. The optimum preparation craft of Danshen phenolic acid fast release micro-pellets was screened out by orhogonal design. Formula of Danshen phenolic acid fast release micro-pellets was calculated as volume dose 50 g. The formula was as follows: principal agent 22.5 g, lactose 5 g, CMS-Na 2 g, MCC 20.5 g, 27 mL 30% ethanol as wetting agent. Extrusion-spheronization was applied. The optimum conditions were screened out as follows: extrusion frequency (25 Hz), spheronization machine frequency (50 Hz), spheronization time (4 min). The process was scientific and rational. The preparation is stable settles basis for multi-drug delivery system of Tongmai micro-pellets.

Preoperative preparation. Value, perspective, and practice in patient care.

PubMed

Kopp, V J

2000-09-01

Preanesthesia preparation will continue to stimulate creativity and debate. Strategies for process improvement will take various shapes and require tools previously unfamiliar to many medical managers. At UNC Health System, anesthesiologists currently are committed to the centralized preanesthesia clinic approach used in PreCare. To date, their strategies have been validated by their institutional measures of success: a 0.7% first-case AM work-up rate, a 5% no PreCare visit rate, a 5% consent problem rate, and a 0% rejected specimen rate, with a 43% blood-draw rate for all patients. As their health system expands, however, other strategies and preparation modalities may become necessary. Telemedicine and Internet-dependent processes are appealing in the highly educated and technologically sophisticated marketplace. As the region becomes increasingly urbanized, local employment patterns prevent easy access to services, and functional compromises, such as bypassing PreCare or reliance on telephone or on-line interviews for preparation, may become necessary. The need to expand PreCare in the near future is already evident. As was found during initial planning, process improvement and space planning are enhanced by computer modeling. UNC Health System employed a proprietary animated simulation modeling (ASM) tool, MedModel, (ProModel, Orem, UT), although other techniques exist for the same purpose. Use of ASM as a strategy management tool allowed generation of ideal space-time-personnel scenarios that could expose potential problems before resources and physical restructuring occurred. ASM also can be used to compare data obtained from real-time observations to any reference scenario, including any that looks at economic measures of process, to help refine strategic visions before instituting tactical solutions. Used in this manner, ASM can reveal physical, temporal, personnel, and policy-related factors not otherwise seen as exerting effects on overall preprocedural preparation processes. Coupled with other classic planning techniques, such as time-motion studies, modified Delphi techniques, customer satisfaction surveys, benchmarking studies, and financial analysis and growth projections, ASM has helped enhance total quality management efforts in PreCare and other planning projects at UNC Health System. Other researchers have used other simulation techniques to assess clinic functions. Operational challenges that exist in preanesthesia preparation clinics place these clinics on the same level as other kinds of medical service clinics. The lessons learned in most clinic settings may be applied in a cross-wise manner to the preanesthesia clinic. Dexter contends that efficient delivery of care that respects patients' time and needs does more than assist the procedural preparation process; it also supports the physician's ethical obligation to the patient to give the best possible care. Documenting patient medical information, education efforts, and maintaining the medical-legal integrity of the preanesthesia preparation materials is another area of increasing concern and research. When hand-held computers capable of linking by way of infrared technologies or that use rented downloadable software to run specific applications become commonly used, the complexity of ensuring privacy will grow. The complexity, however, will not be insurmountable. Privacy problems exist in any information management system, whether paper-based (i.e., reducing redundant forms, eliminating indiscriminant photocopying of records), electronic-based (i.e., encryption, server access, system failure), or both. Electronic conveyance of medical information faces more legal and economic than technical hurdles. The penetration in US households of Internet services presently is less than 40%, whereas the penetration of personal computers is just over 50%. These figures are compared with penetration of corded telephones, televisions, and radios at levels greater tha

Differentiating between appraisal process and product in cognitive theories of posttraumatic stress

PubMed Central

Nanney, John T.; Constans, Joseph I.; Kimbrell, Timothy A.; Kramer, Teresa L.; Pyne, Jeffrey M.

2014-01-01

Biased appraisal is central to cognitive theories of posttraumatic stress, but little research has examined the potentially distinct meanings of the term. The on-going process of appraising social information and the beliefs that emerge as products of that process can be distinguished conceptually. The present study sought to examine if these two meanings are empirically distinct as well, and if so, to begin exploring potential relations between these appraisal constructs and posttraumatic stress symptoms. Soldiers (N = 424) preparing for deployment to Iraq or Afghanistan were administered measures of each construct. Results of confirmatory factor analysis suggest that the appraisal process and the products of that process (i.e., beliefs) are indeed distinct. Structural equation models are consistent with cognitive bias and social information processing literatures which posit that a biased appraisal process may contribute to the development of dysfunctional beliefs and posttraumatic stress symptoms following trauma. The potential utility of distinctly conceptualizing and measuring the appraisal process in both clinical and research settings is discussed. PMID:26147520

Differentiating between appraisal process and product in cognitive theories of posttraumatic stress.

PubMed

Nanney, John T; Constans, Joseph I; Kimbrell, Timothy A; Kramer, Teresa L; Pyne, Jeffrey M

2015-07-01

Biased appraisal is central to cognitive theories of posttraumatic stress, but little research has examined the potentially distinct meanings of the term. The ongoing process of appraising social information and the beliefs that emerge as products of that process can be distinguished conceptually. This study sought to examine whether these 2 meanings are empirically distinct as well, and if so, to begin exploring potential relations between these appraisal constructs and posttraumatic stress symptoms. Soldiers (N = 424) preparing for deployment to Iraq or Afghanistan were administered measures of each construct. Results of confirmatory factor analysis suggest that the appraisal process and the products of that process (i.e., beliefs) are indeed distinct. Structural equation models are consistent with cognitive bias and social information processing literatures, which posit that a biased appraisal process may contribute to the development of dysfunctional beliefs and posttraumatic stress symptoms following trauma. The potential utility of distinctly conceptualizing and measuring the appraisal process in both clinical and research settings is discussed. (c) 2015 APA, all rights reserved).

How prepared are UK medical graduates for practice? A rapid review of the literature 2009–2014

PubMed Central

Grundy, Lisa; Mann, Mala; John, Zoe; Panagoulas, Eleni; Bullock, Alison; Mattick, Karen

2017-01-01

Objective To understand how prepared UK medical graduates are for practice and the effectiveness of workplace transition interventions. Design A rapid review of the literature (registration #CRD42013005305). Data sources Nine major databases (and key websites) were searched in two timeframes (July–September 2013; updated May–June 2014): CINAHL, Embase, Educational Resources Information Centre, Health Management Information Consortium, MEDLINE, MEDLINE in Process, PsycINFO, Scopus and Web of Knowledge. Eligibility criteria for selecting studies Primary research or studies reporting UK medical graduates' preparedness between 2009 and 2014: manuscripts in English; all study types; participants who are final-year medical students, medical graduates, clinical educators, patients or NHS employers and all outcome measures. Data extraction At time 1, three researchers screened manuscripts (for duplicates, exclusion/inclusion criteria and quality). Remaining 81 manuscripts were coded. At time 2, one researcher repeated the process for 2013–2014 (adding six manuscripts). Data were analysed using a narrative synthesis and mapped against Tomorrow's Doctors (2009) graduate outcomes. Results Most studies comprised junior doctors' self-reports (65/87, 75%), few defined preparedness and a programmatic approach was lacking. Six themes were highlighted: individual skills/knowledge, interactional competence, systemic/technological competence, personal preparedness, demographic factors and transitional interventions. Graduates appear prepared for history taking, physical examinations and some clinical skills, but unprepared for other aspects, including prescribing, clinical reasoning/diagnoses, emergency management, multidisciplinary team-working, handover, error/safety incidents, understanding ethical/legal issues and ward environment familiarity. Shadowing and induction smooth transition into practice, but there is a paucity of evidence around assistantship efficacy. Conclusions Educational interventions are needed to address areas of unpreparedness (eg, multidisciplinary team-working, prescribing and clinical reasoning). Future research in areas we are unsure about should adopt a programmatic and rigorous approach, with clear definitions of preparedness, multiple stakeholder perspectives along with multisite and longitudinal research designs to achieve a joined-up, systematic, approach to understanding future educational requirements for junior doctors. PMID:28087554

How does temporal preparation speed up response implementation in choice tasks? Evidence for an early cortical activation.

PubMed

Tandonnet, Christophe; Davranche, Karen; Meynier, Chloé; Burle, Borís; Vidal, Franck; Hasbroucq, Thierry

2012-02-01

We investigated the influence of temporal preparation on information processing. Single-pulse transcranial magnetic stimulation (TMS) of the primary motor cortex was delivered during a between-hand choice task. The time interval between the warning and the imperative stimulus varied across blocks of trials was either optimal (500 ms) or nonoptimal (2500 ms) for participants' performance. Silent period duration was shorter prior to the first evidence of response selection for the optimal condition. Amplitude of the motor evoked potential specific to the responding hand increased earlier for the optimal condition. These results revealed an early release of cortical inhibition and a faster integration of the response selection-related inputs to the corticospinal pathway when temporal preparation is better. Temporal preparation may induce cortical activation prior to response selection that speeds up the implementation of the selected response. Copyright © 2011 Society for Psychophysiological Research.

Water repellent porous silica films by sol-gel dip coating method.

PubMed

Rao, A Venkateswara; Gurav, Annaso B; Latthe, Sanjay S; Vhatkar, Rajiv S; Imai, Hiroaki; Kappenstein, Charles; Wagh, P B; Gupta, Satish C

2010-12-01

The wetting of solid surfaces by water droplets is ubiquitous in our daily lives as well as in industrial processes. In the present research work, water repellent porous silica films are prepared on glass substrate at room temperature by sol-gel process. The coating sol was prepared by keeping the molar ratio of methyltriethoxysilane (MTES), methanol (MeOH), water (H(2)O) constant at 1:12.90:4.74, respectively, with 2M NH(4)OH throughout the experiments and the molar ratio (M) of MTES/Ph-TMS was varied from 0 to 0.22. A simple dip coating technique is adopted to coat silica films on the glass substrates. The static water contact angle as high as 164° and water sliding angle as low as 4° was obtained for silica film prepared from M=0.22. The surface morphological studies of the prepared silica film showed the porous structure with pore sizes typically ranging from 200nm to 1.3μm. The superhydrophobic silica films prepared from M=0.22 retained their superhydrophobicity up to a temperature of 285°C and above this temperature the films became superhydrophilic. The porous and water repellent silica films are prepared by proper alteration of the Ph-TMS in the coating solution. The prepared silica films were characterized by surface profilometer, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier Transform Infrared (FT-IR) spectroscopy, humidity tests, chemical aging tests, static and dynamic water contact angle measurements. Copyright © 2010 Elsevier Inc. All rights reserved.

Expedition 9 Soyuz Rollout

NASA Image and Video Library

2004-04-16

Alexander Zelenschikov, the Deputy Chief Designer of RSC-Energia, stands outside a processing facility at the Baikonur Cosmodrome as the Soyuz TMA-4 capsule and its booster rocket start the rollout to the launch pad on Saturday, April 17, 2004, in Baikonur, Kazakhstan, in preparation for the launch of the Expedition 9 crew and a European researcher to the International Space Station April 19. The Soyuz vehicle is transported to the launch pad horizontally on a railcar from its processing hangar in a process that takes about 2.5 hours to complete. Photo Credit: (NASA/Bill Ingalls)

Processing and Preparation of Advanced Stirling Convertors for Extended Operation at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Oriti, Salvatore M.; Cornell, Peggy A.

2008-01-01

The U.S. Department of Energy (DOE), Lockheed Martin Space Company (LMSC), Sunpower Inc., and NASA Glenn Research Center (GRC) have been developing an Advanced Stirling Radioisotope Generator (ASRG) for use as a power system on space science missions. This generator will make use of the free-piston Stirling convertors to achieve higher conversion efficiency than currently available alternatives. NASA GRC is supporting the development of the ASRG by providing extended operation of several Sunpower Inc. Advanced Stirling Convertors (ASCs). In the past year and a half, eight ASCs have operated in continuous, unattended mode in both air and thermal vacuum environments. Hardware, software, and procedures were developed to prepare each convertor for extended operation with intended durations on the order of tens of thousands of hours. Steps taken to prepare a convertor for long-term operation included geometry measurements, thermocouple instrumentation, evaluation of working fluid purity, evacuation with bakeout, and high purity charge. Actions were also taken to ensure the reliability of support systems, such as data acquisition and automated shutdown checkouts. Once a convertor completed these steps, it underwent short-term testing to gather baseline performance data before initiating extended operation. These tests included insulation thermal loss characterization, low-temperature checkout, and full-temperature and power demonstration. This paper discusses the facilities developed to support continuous, unattended operation, and the processing results of the eight ASCs currently on test.

"I Do Not Have the Means to Speak:" Educating Youth for Citizenship in Post-Conflict Liberia

ERIC Educational Resources Information Center

Quaynor, Laura

2015-01-01

Although policymakers stress the importance of education in promoting peace, little research examines the ways that schools prepare students affected by conflict to participate in the restoration of peace in their political community. Post-conflict societies experience severe challenges in strengthening political processes and social cohesion.…

Preparing Marketing for the Future: Strategic Marketing Challenges for Continuing Education

ERIC Educational Resources Information Center

Fong, James

2013-01-01

Today's programs and delivery methods in continuing education for the adult student are evolving due to changing needs, competition, and new markets and technologies. The marketing infrastructure, including staffing, budgeting, and processes such as customer relationship marketing and market research, must be in alignment with changing needs.

Peering into the secrets of food and agricultural co-products

USDA-ARS?s Scientific Manuscript database

Scanning electron microscopy is a useful tool for understanding food contamination and directing product development of food and industrial products. The current trend in food research is to produce foods that are fast to prepare and/or ready to eat. At the same time, these processed foods must be s...

Opportunities to Create Active Learning Techniques in the Classroom

ERIC Educational Resources Information Center

Camacho, Danielle J.; Legare, Jill M.

2015-01-01

The purpose of this article is to contribute to the growing body of research that focuses on active learning techniques. Active learning techniques require students to consider a given set of information, analyze, process, and prepare to restate what has been learned--all strategies are confirmed to improve higher order thinking skills. Active…

Students' Perceptions of Baccalaureate Completion Programs at Community Colleges: A Qualitative Study

ERIC Educational Resources Information Center

Schmitigal, Linda

2010-01-01

The purpose of this research is to understand the perceptions of baccalaureate-seeking, community college students regarding their academic preparation as they transfer to university courses. The literature supports both the need to help students persist to baccalaureate degrees and the difficulty transfer students face in this process. However,…

Student Teachers' Thinking Processes and ICT Integration: Predictors of Prospective Teaching Behaviors with Educational Technology

ERIC Educational Resources Information Center

Sang, Guoyuan; Valcke, Martin; van Braak, Johan; Tondeur, Jo

2010-01-01

Student teachers should be prepared to integrate information and communication technology (ICT) into their future teaching and learning practices. Despite the increased availability and support for ICT integration, relatively few teachers intend to integrate ICT into their teaching activities (e.g., Ertmer, 2005). The available research has thus…

78 FR 73787 - Chlorsulfuron; Community Right-to-Know Toxic Chemical Release Reporting

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-09

... 190/891138: AMR-1197-88. Unpublished study prepared by Huntingdon Research Centre Ltd. 76p. As cited... this notice apply to me? You may be potentially affected by this action if you manufacture, process, or... to: Category Examples of potentially affected entities Industry Facilities included in the following...

Forced Alignment for Understudied Language Varieties: Testing Prosodylab-Aligner with Tongan Data

ERIC Educational Resources Information Center

Johnson, Lisa M.; Di Paolo, Marianna; Bell, Adrian

2018-01-01

Automated alignment of transcriptions to audio files expedites the process of preparing data for acoustic analysis. Unfortunately, the benefits of auto-alignment have generally been available only to researchers studying majority languages, for which large corpora exist and for which acoustic models have been created by large-scale research…

Improvisational Theatre as Public Pedagogy: A Case Study of "Aesthetic" Pedagogy in Leadership Development

ERIC Educational Resources Information Center

Katz-Buonincontro, Jen

2011-01-01

How does improvisational theatre promote aesthetic learning in leaders, emphasizing emotion and somatic, or sensory, knowledge? While improvisational theatre has been used in organizational settings, there is little empirical research describing the aesthetic learning process geared towards preparing educational leaders. Based on a case study of…

76 FR 35446 - Agency Information Collection Activities: Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-17

...) approval to conduct survey research to monitor the health care industry's awareness of, and preparation for...) Outpatient Physical Therapy--Speech Pathology Survey Report; Use: CMS-1856 is used as an application to be... the Automated Survey Process Environment (ASPEN). CMS- 1893 is used by the State survey agency to...

Farm Population of the United States: 1976. Current Population Reports: Farm Population.

ERIC Educational Resources Information Center

Banks, Vera J.; And Others

Prepared cooperatively by the Bureau of the Census and the Economic Research Service of the U.S. DeparLment of Agriculture, this document presents narrative and tabular data on: demographic and social characteristics of the farm population; economic characteristics of the farm population; revision of farm population processing procedures; and…

Minding the Gap: Annotation as Preparation for Discussion

ERIC Educational Resources Information Center

Feito, Jose Alfonso; Donahue, Patricia

2008-01-01

This research project examines classroom discussion in its relationship to reading as made visible through the practice of textual annotation. In order to develop a rich description of student reading/discussion processes, we targeted multiple undergraduate seminars at a liberal arts college as they encountered the first two Acts of Shakespeare's…

Preparing Teachers for Inclusion in Mexico: How Effective is This Process?

ERIC Educational Resources Information Center

Romero-Contreras, Silvia; Garcia-Cedillo, Ismael; Forlin, Chris; Lomelí-Hernández, Karla Abril

2013-01-01

Inclusive education is the most advanced form of recognition of the right to education. Mexico has made important legal and administrative changes to foster inclusion since the end of the twentieth century. This research assesses the impact of the Mexican pre-service teacher curriculum on 813 pre-service teachers' sentiments, attitudes and…

Using Enterprise Education to Prepare Healthcare Professional Graduates for the Real World

ERIC Educational Resources Information Center

Refai, Deema; Thompson, John

2014-01-01

This paper reports an investigation of the extent to which enterprise education (EE) is used in professional health schools at HEIs to develop graduates' "soft" and "functional" enterprise skills, and assesses the effectiveness of the process of delivering this education. A qualitative research study was carried out, using…

Preparing for High Technology: 30 Steps to Implementation. Research & Development Series No. 232.

ERIC Educational Resources Information Center

Abram, Robert; And Others

This planning guide is one of three that addresses the concerns of postsecondary college administrators and planners regarding the planning and implementation of technician training programs in high technology areas. It specifically focuses on a 30-step planning process that is generalizable to various high technology areas. (The other two…

Helping Doctoral Students Establish Long-Term Identities as Technical Communication Scholars

ERIC Educational Resources Information Center

Grant-Davie, Keith; Matheson, Breeanne; Stephens, Eric James

2017-01-01

This article aims to help doctoral students in technical communication prepare themselves for the academic job market and for the subsequent process of earning tenure and promotion in increasingly demanding environments. The authors propose that students do four things: (a) learn to spot and articulate research problems; (b) find their…

A Collaborative Approach to Planning the Induction Process for Beginning Vocational Teachers.

ERIC Educational Resources Information Center

Camp, William G.; Heath, Betty

An effective induction assistance program is necessary to prepare beginning vocational education teachers. A structured approach should be based on research, educational theory, experience, and the best thinking that can be found. To be successful, an induction assistance program must be a collaborative effort, accepted and supported by local…

Scientific writing: strategies and tools for students and advisors.

PubMed

Singh, Vikash; Mayer, Philipp

2014-01-01

Scientific writing is a demanding task and many students need more time than expected to finish their research articles. To speed up the process, we highlight some tools, strategies as well as writing guides. We recommend starting early in the research process with writing and to prepare research articles, not after but in parallel to the lab or field work. We suggest considering scientific writing as a team enterprise, which needs proper organization and regular feedback. In addition, it is helpful to select potential target journals early and to consider not only scope and reputation, but also decision times and rejection rates. Before submission, instructions to authors and writing guides should be considered, and drafts should be extensively revised. Later in the process editor's and reviewer's comments should be followed. Our tips and tools help students and advisors to structure the writing and publishing process, thereby stimulating them to develop their own strategies to success. Copyright © 2014 The International Union of Biochemistry and Molecular Biology.

Stem cell research ethics: consensus statement on emerging issues.

PubMed

Caulfield, Timothy; Ogbogu, Ubaka; Nelson, Erin; Einsiedel, Edna; Knoppers, Bartha; McDonald, Michael; Brunger, Fern; Downey, Robin; Fernando, Kanchana; Galipeau, Jacques; Geransar, Rose; Griener, Glenn; Grenier, Glenn; Hyun, Insoo; Isasi, Rosario; Kardel, Melanie; Knowles, Lori; Kucic, Terrence; Lotjonen, Salla; Lyall, Drew; Magnus, David; Mathews, Debra J H; Nisbet, Matthew; Nisker, Jeffrey; Pare, Guillaume; Pattinson, Shaun; Pullman, Daryl; Rudnicki, Michael; Williams-Jones, Bryn; Zimmerman, Susan

2007-10-01

This article is a consensus statement by an international interdisciplinary group of academic experts and Canadian policy-makers on emerging ethical, legal and social issues in human embryonic stem cells (hESC) research in Canada. The process of researching consensus included consultations with key stakeholders in hESC research (regulations, stem cell researchers, and research ethics experts), preparation and distribution of background papers, and an international workshop held in Montreal in February 2007 to discuss the papers and debate recommendations. The recommendations provided in the consensus statement focus on issues of immediate relevance to Canadian policy-makers, including informed consent to hESC research, the use of fresh embryos in research, management of conflicts of interest, and the relevance of public opinion research to policy-making.

Messiah College Biodiesel Fuel Generation Project Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zummo, Michael M; Munson, J; Derr, A

Many obvious and significant concerns arise when considering the concept of small-scale biodiesel production. Does the fuel produced meet the stringent requirements set by the commercial biodiesel industry? Is the process safe? How are small-scale producers collecting and transporting waste vegetable oil? How is waste from the biodiesel production process handled by small-scale producers? These concerns and many others were the focus of the research preformed in the Messiah College Biodiesel Fuel Generation project over the last three years. This project was a unique research program in which undergraduate engineering students at Messiah College set out to research the feasibilitymore » of small-biodiesel production for application on a campus of approximately 3000 students. This Department of Energy (DOE) funded research program developed out of almost a decade of small-scale biodiesel research and development work performed by students at Messiah College. Over the course of the last three years the research team focused on four key areas related to small-scale biodiesel production: Quality Testing and Assurance, Process and Processor Research, Process and Processor Development, and Community Education. The objectives for the Messiah College Biodiesel Fuel Generation Project included the following: 1. Preparing a laboratory facility for the development and optimization of processors and processes, ASTM quality assurance, and performance testing of biodiesel fuels. 2. Developing scalable processor and process designs suitable for ASTM certifiable small-scale biodiesel production, with the goals of cost reduction and increased quality. 3. Conduct research into biodiesel process improvement and cost optimization using various biodiesel feedstocks and production ingredients.« less

Titania nanotube powders obtained by rapid breakdown anodization in perchloric acid electrolytes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ali, Saima, E-mail: saima.ali@aalto.fi; Hannula, Simo-Pekka

Titania nanotube (TNT) powders are prepared by rapid break down anodization (RBA) in a 0.1 M perchloric acid (HClO{sub 4}) solution (Process 1), and ethylene glycol (EG) mixture with HClO{sub 4} and water (Process 2). A study of the as-prepared and calcined TNT powders obtained by both processes is implemented to evaluate and compare the morphology, crystal structure, specific surface area, and the composition of the nanotubes. Longer TNTs are formed in Process 1, while comparatively larger pore diameter and wall thickness are obtained for the nanotubes prepared by Process 2. The TNTs obtained by Process 1 are converted tomore » nanorods at 350 °C, while nanotubes obtained by Process 2 preserve tubular morphology till 350 °C. In addition, the TNTs prepared by an aqueous electrolyte have a crystalline structure, whereas the TNTs obtained by Process 2 are amorphous. Samples calcined till 450 °C have XRD peaks from the anatase phase, while the rutile phase appears at 550 °C for the TNTs prepared by both processes. The Raman spectra also show clear anatase peaks for all samples except the as-prepared sample obtained by Process 2, thus supporting the XRD findings. FTIR spectra reveal the presence of O-H groups in the structure for the TNTs obtained by both processes. However, the presence is less prominent for annealed samples. Additionally, TNTs obtained by Process 2 have a carbonaceous impurity present in the structure attributed to the electrolyte used in that process. While a negligible weight loss is typical for TNTs prepared from aqueous electrolytes, a weight loss of 38.6% in the temperature range of 25–600 °C is found for TNTs prepared in EG electrolyte (Process 2). A large specific surface area of 179.2 m{sup 2} g{sup −1} is obtained for TNTs prepared by Process 1, whereas Process 2 produces nanotubes with a lower specific surface area. The difference appears to correspond to the dimensions of the nanotubes obtained by the two processes. - Graphical abstract: Titania nanotube powders prepared by Process 1 and Process 2 have different crystal structure and specific surface area. - Highlights: • Titania nanotube (TNT) powder is prepared in low water organic electrolyte. • Characterization of TNT powders prepared from aqueous and organic electrolyte. • TNTs prepared by Process 1 are crystalline with higher specific surface area. • TNTs obtained by Process 2 have carbonaceous impurities in the structure.« less

An easy “SteamDrop” method for high quality plant chromosome preparation

PubMed Central

2014-01-01

Background The chromosome preparation is a crucial step for obtaining satisfactory results in molecular cytogenetic researches. The preparation of plant chromosomes for molecular cytogenetic purposes remains a challenge for some species. In contrast to human chromosome preparation, the processes occurring during plant chromosome preparation and causing chromosome spreading are still poorly understood. Results We studied the dynamics of plant chromosome spreading after dropping cell suspension on slides. We showed that steam stimulates cytoplasm hydrolysis and rapid chromosome spreading and that chromosomes stretch during this chromosome spreading. Based on these observations, we developed a novel method, named “SteamDrop”, for the preparation of well-spread mitotic and pachytene chromosomes and successfully used it for 28 plant species with large and small chromosomes. We applied cell suspensions in ethanol instead of the commonly used ethanol/acetic acid fixative. Mitotic and meiotic chromosomes prepared via “SteamDrop” were used in fluorescent in situ hybridization (FISH) experiments with repetitive and unique DNA probes. Long storage of cell suspensions in ethanol did not impair the quality of chromosome preparations. Conclusion The SteamDrop procedure provides a robust and routine method for high quality plant chromosome preparations. The method can be applied for metaphase as well as pachytene chromosome preparation in wide range of species. The chromosomes prepared by SteamDrop are well suitable for repetitive and unique DNA visualization. PMID:24602284

Designing Effective Undergraduate Research Experiences

NASA Astrophysics Data System (ADS)

Severson, S.

2010-12-01

I present a model for designing student research internships that is informed by the best practices of the Center for Adaptive Optics (CfAO) Professional Development Program. The dual strands of the CfAO education program include: the preparation of early-career scientists and engineers in effective teaching; and changing the learning experiences of students (e.g., undergraduate interns) through inquiry-based "teaching laboratories." This paper will focus on the carry-over of these ideas into the design of laboratory research internships such as the CfAO Mainland internship program as well as NSF REU (Research Experiences for Undergraduates) and senior-thesis or "capstone" research programs. Key ideas in maximizing student learning outcomes and generating productive research during internships include: defining explicit content, scientific process, and attitudinal goals for the project; assessment of student prior knowledge and experience, then following up with formative assessment throughout the project; setting reasonable goals with timetables and addressing motivation; and giving students ownership of the research by implementing aspects of the inquiry process within the internship.

Solid-State Division progress report for period ending March 31, 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Green, P.H.; Watson, D.M.

1983-09-01

Progress and activities are reported on: theoretical solid-state physics (surfaces; electronic, vibrational, and magnetic properties; particle-solid interactions; laser annealing), surface and near-surface properties of solids (surface, plasma-material interactions, ion implantation and ion-beam mixing, pulsed-laser and thermal processing), defects in solids (radiation effects, fracture, impurities and defects, semiconductor physics and photovoltaic conversion), transport properties of solids (fast-ion conductors, superconductivity, mass and charge transport in materials), neutron scattering (small-angle scattering, lattice dynamics, magnetic properties, structure and instrumentation), and preparation and characterization of research materials (growth and preparative methods, nuclear waste forms, special materials). (DLC)

Research Preparation in Kinesiology

ERIC Educational Resources Information Center

Silverman, Stephen

2012-01-01

This article addresses research preparation for graduate students. A major assumption is that preparation needs to be differentiated based on a student's goals. Since this is a personal proposal for research preparation, based on experience and the literature, I begin the article providing my perspective since that frames what follows. The next…

An investigation into the effects of quality improvement method on patients' satisfaction: a semi experimental research in Iran.

PubMed

Navipour, Hasan; Nayeri, Nahid Dehghan; Hooshmand, Abbas; Zargar, Marjaneh Taghavi

2011-01-01

Today, to increase effectiveness is a Strategy for success of organizations and their viability. In health care organization not only service cost- effectiveness is a major problem for productivity and organizational management but also customer-centred is in first priority. Because of these reasons, most of health organization trend to patient satisfaction for their viability. If complex process implemented for viability without attention to patient satisfaction, this is no success result. The FOCUS PDCA process is a new strategy for effectiveness of service quality. To this reason, the recent research done and its objective is to assess effect of FOCUS PDCA process strategy on patient satisfaction in surgery units of hospitals affiliated to Tehran Medical University. This research is a semi experimental with non- equivalent design. The sample was all of patients who hospitalized in two selected surgery units. Self-report was method of data gathering. Patient satisfaction assessed with questionnaire in pre and posttest. Then manipulation implemented as post-operation care process selected. Modelling and opportunity statement Diagrams prepared and improvement team organized. Flow process, convergences and cause- effect charts used to prepare list of items to be improved. Executive program was written. This include personnel training, standard implementation, election and training of quality control nurses (Q.C Ns), daily QC of caring and providing appropriate feed back to personnel, forming group session for determining corrective actions. Then after 1 month patient satisfaction was assessed. Statistical analysis shows this process increase patient satisfaction and it leads to care effectiveness. The findings of the pre-intervention phase indicated that the satisfaction level had been low in both groups and it is not significantly different in the two groups (P> 0.05). There was a significant difference before and after following intervention in the case study group (P>0.0001). FOCUS PDCA is effective method for access to various objectives especially patient satisfaction. it is suggested other researcher assess effects of this strategy for other indexes and total care process effectiveness.

A Systematic Review of Reporting Tools Applicable to Sexual and Reproductive Health Programmes: Step 1 in Developing Programme Reporting Standards

PubMed Central

Ali, Moazzam; Chandra-Mouli, Venkatraman; Tran, Nhan; Gülmezoglu, A. Metin

2015-01-01

Background Complete and accurate reporting of programme preparation, implementation and evaluation processes in the field of sexual and reproductive health (SRH) is essential to understand the impact of SRH programmes, as well as to guide their replication and scale-up. Objectives To provide an overview of existing reporting tools and identify core items used in programme reporting with a focus on programme preparation, implementation and evaluation processes. Methods A systematic review was completed for the period 2000–2014. Reporting guidelines, checklists and tools, irrespective of study design, applicable for reporting on programmes targeting SRH outcomes, were included. Two independent reviewers screened the title and abstract of all records. Full texts were assessed in duplicate, followed by data extraction on the focus, content area, year of publication, validation and description of reporting items. Data was synthesized using an iterative thematic approach, where items related to programme preparation, implementation and evaluation in each tool were extracted and aggregated into a consolidated list. Results Out of the 3,656 records screened for title and abstracts, full texts were retrieved for 182 articles, out of which 108 were excluded. Seventy-four full text articles corresponding to 45 reporting tools were retained for synthesis. The majority of tools were developed for reporting on intervention research (n = 15), randomized controlled trials (n = 8) and systematic reviews (n = 7). We identified a total of 50 reporting items, across three main domains and corresponding sub-domains: programme preparation (objective/focus, design, piloting); programme implementation (content, timing/duration/location, providers/staff, participants, delivery, implementation outcomes), and programme evaluation (process evaluation, implementation barriers/facilitators, outcome/impact evaluation). Conclusions Over the past decade a wide range of tools have been developed to improve the reporting of health research. Development of Programme Reporting Standards (PRS) for SRH can fill a significant gap in existing reporting tools. This systematic review is the first step in the development of such standards. In the next steps, we will draft a preliminary version of the PRS based on the aggregate list of identified items, and finalize the tool using a consensus process among experts and user-testing. PMID:26418859

A Systematic Review of Reporting Tools Applicable to Sexual and Reproductive Health Programmes: Step 1 in Developing Programme Reporting Standards.

PubMed

Kågesten, Anna; Tunçalp, Ӧzge; Ali, Moazzam; Chandra-Mouli, Venkatraman; Tran, Nhan; Gülmezoglu, A Metin

2015-01-01

Complete and accurate reporting of programme preparation, implementation and evaluation processes in the field of sexual and reproductive health (SRH) is essential to understand the impact of SRH programmes, as well as to guide their replication and scale-up. To provide an overview of existing reporting tools and identify core items used in programme reporting with a focus on programme preparation, implementation and evaluation processes. A systematic review was completed for the period 2000-2014. Reporting guidelines, checklists and tools, irrespective of study design, applicable for reporting on programmes targeting SRH outcomes, were included. Two independent reviewers screened the title and abstract of all records. Full texts were assessed in duplicate, followed by data extraction on the focus, content area, year of publication, validation and description of reporting items. Data was synthesized using an iterative thematic approach, where items related to programme preparation, implementation and evaluation in each tool were extracted and aggregated into a consolidated list. Out of the 3,656 records screened for title and abstracts, full texts were retrieved for 182 articles, out of which 108 were excluded. Seventy-four full text articles corresponding to 45 reporting tools were retained for synthesis. The majority of tools were developed for reporting on intervention research (n = 15), randomized controlled trials (n = 8) and systematic reviews (n = 7). We identified a total of 50 reporting items, across three main domains and corresponding sub-domains: programme preparation (objective/focus, design, piloting); programme implementation (content, timing/duration/location, providers/staff, participants, delivery, implementation outcomes), and programme evaluation (process evaluation, implementation barriers/facilitators, outcome/impact evaluation). Over the past decade a wide range of tools have been developed to improve the reporting of health research. Development of Programme Reporting Standards (PRS) for SRH can fill a significant gap in existing reporting tools. This systematic review is the first step in the development of such standards. In the next steps, we will draft a preliminary version of the PRS based on the aggregate list of identified items, and finalize the tool using a consensus process among experts and user-testing.

Development Mathematic Assessment to Increase Mathematical Prerequisite Ability on The Student with Learning Disabilities in Inclusive Elementary School

NASA Astrophysics Data System (ADS)

Robiansyah, S. T. U.; Nanang, F.; Hidayat

2018-01-01

The purpose of this study was to introduce about mathematic assessment is a process of obtaining data or information about the mastery of a student's mathematical skills as an ingredient in preparing a learning program. With this mathematics assessment can be known obstacles, difficulties and needs of students especially in the field of mathematic, so that the learning program will be in accordance with the potential students because it is tailored to what is required of students. This research study was conducted at elementary school of inclusive precisely at SDN Sukagalih I Bandung City based learning in setting of inclusive education. This research study is motivated by the existence of a first-grade student who has disabilities learning in mathematics, the ability of the mathematical prerequisite mastery of the classification of objects by color. The results of the research can provide a profile picture of student data information, the data obtained from the results of the development of systematic and formal mathematical assessment. After doing the development of mathematics assessment then the teacher gets important related information: 1. process the analysis of students’ learning needs, especially in the field of mathematics, 2. preparing the learning program planning according to student learning needs, 3. Designing procedural of method remedial program.

Patient and public engagement in priority setting: A systematic rapid review of the literature.

PubMed

Manafò, Elizabeth; Petermann, Lisa; Vandall-Walker, Virginia; Mason-Lai, Ping

2018-01-01

Current research suggests that while patients are becoming more engaged across the health delivery spectrum, this involvement occurs most often at the pre-preparation stage to identify 'high-level' priorities in health ecosystem priority setting, and at the preparation phase for health research. The purpose of this systematic rapid review of the literature is to describe the evidence that does exist in relation to patient and public engagement priority setting in both health ecosystem and health research. HealthStar (via OVID); CINAHL; Proquest Databases; and Scholar's Portal. i) published in English; ii) published within the timeframe of 2007-Current (10 years) unless the report/article was formative in synthesizing key considerations of patient engagement in health ecosystem and health research priority setting; iii) conducted in Canada, the US, Europe, UK, Australia/New Zealand, or Scandinavian countries. i) Is the research valid, sound, and applicable?; ii) what outcomes can we potentially expect if we implement the findings from this research?; iii) will the target population (i.e., health researchers and practitioners) be able to use this research?. A summary of findings from each of the respective processes was synthesized to highlight key information that would support decision-making for researchers when determining the best priority setting process to apply for their specific patient-oriented research. Seventy articles from the UK, US, Canada, Netherlands and Australia were selected for review. Results were organized into two tiers of public and patient engagement in prioritization: Tier 1-Deliberative and Tier 2-Consultative. Highly structured patient and public engagement planning activities include the James Lind Alliance Priority Setting Partnerships (UK), Dialogue Method (Netherlands), Global Evidence Mapping (Australia), and the Deep Inclusion Method/CHoosing All Together (US). The critical study limitations include challenges in comprehensively identifying the patient engagement literature for review, bias in article selection due to the identified scope, missed information due to a more limited use of exhaustive search strategies (e.g., in-depth hand searching), and the heterogeneity of reported study findings. The four public and patient engagement priority setting processes identified were successful in setting priorities that are inclusive and objectively based, specific to the priorities of stakeholders engaged in the process. The processes were robust, strategic and aimed to promote equity in patient voices. Key limitations identified a lack of evaluation data on the success and extent in which patients were engaged. Issues pertaining to feasibility of stakeholder engagement, coordination, communication and limited resources were also considered.

Neural Markers of Responsiveness to the Environment in Human Sleep.

PubMed

Andrillon, Thomas; Poulsen, Andreas Trier; Hansen, Lars Kai; Léger, Damien; Kouider, Sid

2016-06-15

Sleep is characterized by a loss of behavioral responsiveness. However, recent research has shown that the sleeping brain is not completely disconnected from its environment. How neural activity constrains the ability to process sensory information while asleep is yet unclear. Here, we instructed human volunteers to classify words with lateralized hand responses while falling asleep. Using an electroencephalographic (EEG) marker of motor preparation, we show how responsiveness is modulated across sleep. These modulations are tracked using classic event-related potential analyses complemented by Lempel-Ziv complexity (LZc), a measure shown to track arousal in sleep and anesthesia. Neural activity related to the semantic content of stimuli was conserved in light non-rapid eye movement (NREM) sleep. However, these processes were suppressed in deep NREM sleep and, importantly, also in REM sleep, despite the recovery of wake-like neural activity in the latter. In NREM sleep, sensory activations were counterbalanced by evoked down states, which, when present, blocked further processing of external information. In addition, responsiveness markers correlated positively with baseline complexity, which could be related to modulation in sleep depth. In REM sleep, however, this relationship was reversed. We therefore propose that, in REM sleep, endogenously generated processes compete with the processing of external input. Sleep can thus be seen as a self-regulated process in which external information can be processed in lighter stages but suppressed in deeper stages. Last, our results suggest drastically different gating mechanisms in NREM and REM sleep. Previous research has tempered the notion that sleepers are isolated from their environment. Here, we pushed this idea forward and examined, across all sleep stages, the brain's ability to flexibly process sensory information, up to the decision level. We extracted an EEG marker of motor preparation to determine the completion of the sensory processing chain and explored how it is constrained by baseline and evoked neural activity. In NREM sleep, slow waves elicited by stimuli appeared to block response preparation. We also used a novel analytic approach (Lempel-Ziv complexity) and showed that the ability to process external information correlates with neural complexity. A reversal of the correlation between complexity and motor indices in REM sleep suggests drastically different gating mechanisms across sleep stages. Copyright © 2016 the authors 0270-6474/16/366583-14$15.00/0.

Ethical Issues and Practical Challenges in Suicide Research.

PubMed

Hom, Melanie A; Podlogar, Matthew C; Stanley, Ian H; Joiner, Thomas E

2017-03-01

Research with human subjects represents a critical avenue for suicide prevention efforts; however, such research is not without its ethical and practical challenges. Specifically, given the nature of research with individuals at elevated risk for suicide (e.g., increased concerns regarding participant safety, adverse events, liability, difficulties often arise during the institutional review board (IRB) evaluation and approval process. This paper aims to discuss IRB-related issues associated with suicide prevention research, including researcher and IRB panel member responsibilities, suicide risk assessment and management ethics and procedures, informed consent considerations, preparation of study protocols, and education and training. Points to consider and components to potentially include in an IRB application for suicide-related research are additionally provided. Literature relevant to ethics in suicide research and suicide risk assessment and management was reviewed and synthesized. Suicide research can be conducted in accordance with ethical principles while also furthering the science of suicide prevention. Despite the challenging nature of suicide prevention research, empirically informed solutions exist to address difficulties that may emerge in interfacing with IRBs. There remain areas for improvement in the IRB approval process that warrant further investigation and work.

Audit of the informed consent process as a part of a clinical research quality assurance program.

PubMed

Lad, Pramod M; Dahl, Rebecca

2014-06-01

Audits of the informed consent process are a key element of a clinical research quality assurance program. A systematic approach to such audits has not been described in the literature. In this paper we describe two components of the audit. The first is the audit of the informed consent document to verify adherence with federal regulations. The second component is comprised of the audit of the informed consent conference, with emphasis on a real time review of the appropriate communication of the key elements of the informed consent. Quality measures may include preparation of an informed consent history log, notes to accompany the informed consent, the use of an informed consent feedback tool, and the use of institutional surveys to assess comprehension of the informed consent process.

Low cost solar array project. Cell and module formation research area. Process research of non-CZ silicon material

NASA Technical Reports Server (NTRS)

1983-01-01

Liquid diffusion masks and liquid dopants to replace the more expensive CVD SiO2 mask and gaseous diffusion processes were investigated. Silicon pellets were prepared in the silicon shot tower; and solar cells were fabricated using web grown where the pellets were used as a replenishment material. Verification runs were made using the boron dopant and liquid diffusion mask materials. The average of cells produced in these runs was 13%. The relationship of sheet resistivity, temperature, gas flows, and gas composition for the diffusion of the P-8 liquid phosphorus solution was investigated. Solar cells processed from web grown from Si shot material were evaluated, and results qualified the use of the material produced in the shot tower for web furnace feed stock.

Final Technical/Scientific Report: Commodity Scale Thermostable Enzymatic Transformations

DOE Office of Scientific and Technical Information (OSTI.GOV)

James J. Lalonde; Brian Davison

2003-08-30

The conversion of corn starch to high fructose corn-syrup sweetener is a commodity process, producing over 3 billion kg/y. In the last step of the process, an enzyme catalyst is used to convert glucose to the much sweeter sugar fructose. Due to incomplete conversion in the last step, the syrup must be purified using a chromatographic separation technique, which results in equal quantities of water being added to the syrup, and finally the water must be evaporated (up to 1 lb of water/lb of syrup). We have estimated the energy requirement in the evaporation step to be on the ordermore » of 13 billion BTU's/y. This process inefficiency could be eliminated if a thermostable form of glucose isomerase (GI), the enzyme catalyst used in the final step, was developed. Our chosen strategy was to develop an immobilized form of the enzyme in which the protein is first crystallized and then chemically cross-linked to form an insoluble particle. This so-called cross-linked enzyme crystal (CLE C(reg. sign)) technology had been shown to be a powerful method for enzyme stabilization for several other protein catalysts. In this work we have developed more than 30 CLEC preparations of glucose isomerase and tested them for activity and stability. We found these preparations to be highly active, with a 10-50 fold rate per gram of catalyst increase over existing commercial catalysts. The initial rates were also higher at higher temperatures as expected, however the efficiency of the CLEC GI preparations unexpectedly rapidly decreased to a low constant value with use at the higher temperatures. At this point, the source of this activity loss is unclear, however during this loss, the catalyst is found to form a solid mass indicating either breakage of the chemical cross-links or simple aggregation of the particles. It is likely that the increased mass transfer resistance due to this agglomeration is a major component of the activity loss. This research suggests that one potentially beneficial outcome could be the reconfiguration of catalyst columns using these highly active catalyst preparations with inerts to prevent agglomeration. As a result of this work, methods for the preparation of highly active immobilized glucose isomerase preparations were developed along with test methods that are predictive for the stability of these preparations. This research has been conducted as a team effort. The enzyme is produced using Genencor's glucose isomerase protein and the stabilized form has been prepared using Altus' CLEC technology. ORNL has provided bioprocess engineering and testing expertise, and Cargill, Inc. and Genencor have supplied critical technical consultation and economic assessment.« less

Preparing a Book Review: A Research Guide; Preparing a Term Project: A Research Guide; Preparing a Written or Oral Presentation: A Research Guide.

ERIC Educational Resources Information Center

Weil, Martha A.

These three research guides present guidelines and sample exercises to help students at Washburn University of Topeka in Kansas use the library in preparing a book review, a term project, and a written or oral presentation. The guide on book reviews provides suggestions and exercises for choosing a book and finding information on the book, its…

IEH-3 is prepared for launch on STS-95 in the MPPF

NASA Technical Reports Server (NTRS)

1998-01-01

KENNEDY SPACE CENTER, FLA. -- The International Extreme Ultraviolet Hitchhiker-3 (IEH-3), one of the payloads for the STS-95 mission, is prepared for launch in the Multi-Payload Processing Facility. IEH-3 is comprised of seven experiments, including one that will be deployed on Flight Day 3. It is the small, non-recoverable Petite Amateur Navy Satellite (PANSAT) which will store and transmit digital communications. Other IEH investigations are the Solar Constant Experiment (SOLCON), Solar Extreme Ultraviolet Hitchhiker (SEH), Spectrograph/Telescope for Astronomical Research (STAR-LITE), Ultraviolet Spectrograph Telescope for Astronomical Research (UVSTAR), Consortium for Materials Development in Space Complex Autonomous Payloads (CONCAP-IV) for growing thin films via physical vapor transport, and two Get-Away Special (GAS) canister experiments. The experiments will be mounted on a hitchhiker bridge in Discovery's payload bay.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chu, C.I.C.; Gillespie, B.L.

One of the most perplexing problems facing the coal industry is how to properly dispose of the waste and/or even recovery a small fraction of the Btu value of the waste, while minimizing the environmental concerns. UCC Research considers this monumental environmental problems as an opportunity to recovery useable organic materials and reduce the environmental problems created by coal waste. Mild gasification is the method used by UCC Research to realize these objectives. Coal feedstocks are fed into the mild gasification system yielding liquids, char, and gases for commercial application. The program consists of seven tasks: Task 1, Characterize Managementmore » of Coal Preparation Wastes; Task 2, Review Design Specifications and Prepare Preliminary Test Plan; Task 3, Select and Characterize Test Feedstocks; Task 4, Acquire/Construct Process Elements; Task 5, Prepare Final Test Plan; Task 6, Implement Final Test Plan; Task 7, Analyze Test Results and Assess System Economics. A schedule of the program is given. The program was initiated on September 30, 1984. Tasks 1, 2, 3, 4, 5, and 6 have been completed. Work is continuing on Task 7.« less

Enhancing Participation in the U.S. Global Change Research Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Washington, Warren; Lee, Kai; Arent, Doug

2016-02-29

The US Global Change Research Program (USGCRP) is a collection of 13 Federal entities charged by law to assist the United States and the world to understand, assess, predict, and respond to human-induced and natural processes of global change. As the understanding of global change has evolved over the past decades and as demand for scientific information on global change has increased, the USGCRP has increasingly focused on research that can inform decisions to cope with current climate variability and change, to reduce the magnitude of future changes, and to prepare for changes projected over coming decades. Overall, the currentmore » breadth and depth of research in these agencies is insufficient to meet the country's needs, particularly to support decision makers. This report provides a rationale for evaluating current program membership and capabilities and identifying potential new agencies and departments in the hopes that these changes will enable the program to more effectively inform the public and prepare for the future. It also offers actionable recommendations for adjustments to the methods and procedures that will allow the program to better meet its stated goals.« less

Kinetics of Nucleation and Crystal Growth in Glass Forming Melts in Microgravity

NASA Technical Reports Server (NTRS)

Day, Delbert E.; Ray, Chandra S.

1999-01-01

The following list summarizes the most important results that have been consistently reported for glass forming melts in microgravity: (1) Glass formation is enhanced for melts prepared in space; (2) Glasses prepared in microgravity are more chemically homogeneous and contain fewer and smaller chemically heterogeneous regions than identical glasses prepared on earth; (3) Heterogeneities that are deliberately introduced such as Pt particles are more uniformly distributed in a glass melted in space than in a glass melted on earth; (4) Glasses prepared in microgravity are more resistant to crystallization and have a higher mechanical strength and threshold energy for radiation damage; and (5) Glasses crystallized in space have a different microstructure, finer grains more uniformly distributed, than equivalent samples crystallized on earth. The preceding results are not only scientifically interesting, but they have considerable practical implications. These results suggest that the microgravity environment is advantageous for developing new and improved glasses and glass-ceramics that are difficult to prepare on earth. However, there is no suitable explanation at this time for why a glass melted in microgravity will be more chemically homogeneous and more resistant to crystallization than a glass melted on earth. A fundamental investigation of melt homogenization, nucleation, and crystal growth processes in glass forming melts in microgravity is important to understanding these consistently observed, but yet unexplained results. This is the objective of the present research. A lithium disilicate (Li2O.2SiO2) glass will be used for this investigation, since it is a well studied system, and the relevant thermodynamic and kinetic parameters for nucleation and crystal growth at 1-g are available. The results from this research are expected to improve our present understanding of the fundamental mechanism of nucleation and crystal growth in melts and liquids, and to lead improvements in glass processing technology on earth, with the potential for creating new high performance glasses and glass-ceramics.

Design of quantum efficiency measurement system for variable doping GaAs photocathode

NASA Astrophysics Data System (ADS)

Chen, Liang; Yang, Kai; Liu, HongLin; Chang, Benkang

2008-03-01

To achieve high quantum efficiency and good stability has been a main direction to develop GaAs photocathode recently. Through early research, we proved that variable doping structure is executable and practical, and has great potential. In order to optimize variable doping GaAs photocathode preparation techniques and study the variable doping theory deeply, a real-time quantum efficiency measurement system for GaAs Photocathode has been designed. The system uses FPGA (Field-programmable gate array) device, and high speed A/D converter to design a high signal noise ratio and high speed data acquisition card. ARM (Advanced RISC Machines) core processor s3c2410 and real-time embedded system are used to obtain and show measurement results. The measurement precision of photocurrent could reach 1nA, and measurement range of spectral response curve is within 400~1000nm. GaAs photocathode preparation process can be real-time monitored by using this system. This system could easily be added other functions to show the physic variation of photocathode during the preparation process more roundly in the future.

Materials Science Clean Room Facility at Tulane University (Final Technical Report)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Altiero, Nicholas

2010-09-30

The project involves conversion of a 3,000 sq. ft. area into a clean room facility for materials science research. It will be accomplished in phases. Phase I will involve preparation of the existing space, acquisition and installation of clean room equipped with a pulsed laser deposition (PLD) processing system, and conversion of ancillary space to facilitate the interface with the clean room. From a capital perspective, Phases II and III will involve the acquisition of additional processing, fabrication, and characterization equipment and capabilities.

Expedition 9 Soyuz Rollout

NASA Image and Video Library

2004-04-16

Security Officers with their dog watch as the Soyuz TMA-4 capsule and its booster rocket begin to roll to the launch pad at the Baikonur Cosmodrome on Saturday, April 17, 2004, in Baikonur, Kazakhstan in preparation for the launch of the Expedition 9 crew and a European researcher to the International Space Station on April 19. The Soyuz vehicle is transported to the launch pad horizontally on a railcar from its processing hangar in a process that takes about 2.5 hours to complete. Photo Credit: (NASA/Bill Ingalls)

How to respond to referee comments for scientific articles?

PubMed

Kalemci, Mustafa Serdar; Turna, Burak

2013-09-01

Currently, the increasing number of article submissions to scientific journals forces editors to be more selective in their acceptance of papers. Consequently, editors have increased the frequency of their use of scientific referee mechanisms. For many researchers, the publication of a scientific article in a high impact factor journal is a gradual and difficult process. After preparation and submission of a manuscript, one of the most important issue is responding to the comments of referees. However, there is a paucity of published reports in the literature describing how to respond to these comments. The aim of this review is to assist researchers/authors in responding to referee comments as part of the publication process for scientific articles.

Review of the Status of Learning in Research on Sport Education: Future Research and Practice

PubMed Central

Araújo, Rui; Mesquita, Isabel; Hastie, Peter A.

2014-01-01

Research concerning Sport Education’s educational impact has shown unequivocal results according to students’ personal and social development. Nevertheless, research is still sparse with respect to the model’s impact on student learning outcomes. The goal of the present review is to therefore scrutinize what is currently known regarding students’ learning during their participation in Sport Education. This research spans a variety of studies, cross various countries, school grades, the sports studied, as well as the methods applied and dimensions of student learning analyzed. While research on the impact of Sport Education on students’ learning, as well as teachers’ and students’ perceptions about student learning has shown students’ improvements during the participation in Sport Education seasons, there is still considerable variance in these results. For example, some studies report superior learning opportunities to boys and higher skill-level students while other studies have identified superior learning opportunities for girls and lower skill-level students. These inconsistent results can be explained by factors not considered in the Sport Education research, such as the effect of time on students’ learning and the control of the teaching-learning process within Sport Education units. In this review directions for future research and practice are also described. Future research should define, implement, and evaluate protocols for student-coaches’ preparation in order to understand the influence of this issue on students’ learning as well as consider the implementation of hybrid approaches. Moreover, future studies should consider the interaction of gender and skill level and a retention test in the analysis of students’ learning improvements in order to obtain a more realist and complete portrait of the impact of Sport Education. Finally, in order to reach an entirely understanding of the teaching-learning process, it is necessary to use research designs that attend to the complexity of this process. Key Points Despite research regarding has showed students’ improvements during the participation in Sport Education seasons, it remains somewhat equivocal. The studies included in this review show students’ improvements on skill, knowledge and tactical development, as we as game play, during the participation in Sport Education units. Some studies report superior learning opportunities to boys and higher skill-level students while other studies exposed superior learning opportunities to girls and lower skill-level students. The effect of time on students’ learning and the control of the teaching-learning process within Sport Education units can explain these equivocal results. Future research is encouraged to consider the implementation of protocols for student-coaches’ preparation, hybrid models, a retention test, the interaction of gender and skill level, and use research designs that attend to the complexity of the teaching-learning process. PMID:25435778

Review of the status of learning in research on sport education: future research and practice.

PubMed

Araújo, Rui; Mesquita, Isabel; Hastie, Peter A

2014-12-01

Research concerning Sport Education's educational impact has shown unequivocal results according to students' personal and social development. Nevertheless, research is still sparse with respect to the model's impact on student learning outcomes. The goal of the present review is to therefore scrutinize what is currently known regarding students' learning during their participation in Sport Education. This research spans a variety of studies, cross various countries, school grades, the sports studied, as well as the methods applied and dimensions of student learning analyzed. While research on the impact of Sport Education on students' learning, as well as teachers' and students' perceptions about student learning has shown students' improvements during the participation in Sport Education seasons, there is still considerable variance in these results. For example, some studies report superior learning opportunities to boys and higher skill-level students while other studies have identified superior learning opportunities for girls and lower skill-level students. These inconsistent results can be explained by factors not considered in the Sport Education research, such as the effect of time on students' learning and the control of the teaching-learning process within Sport Education units. In this review directions for future research and practice are also described. Future research should define, implement, and evaluate protocols for student-coaches' preparation in order to understand the influence of this issue on students' learning as well as consider the implementation of hybrid approaches. Moreover, future studies should consider the interaction of gender and skill level and a retention test in the analysis of students' learning improvements in order to obtain a more realist and complete portrait of the impact of Sport Education. Finally, in order to reach an entirely understanding of the teaching-learning process, it is necessary to use research designs that attend to the complexity of this process. Key PointsDespite research regarding has showed students' improvements during the participation in Sport Education seasons, it remains somewhat equivocal.The studies included in this review show students' improvements on skill, knowledge and tactical development, as we as game play, during the participation in Sport Education units.Some studies report superior learning opportunities to boys and higher skill-level students while other studies exposed superior learning opportunities to girls and lower skill-level students.The effect of time on students' learning and the control of the teaching-learning process within Sport Education units can explain these equivocal results.Future research is encouraged to consider the implementation of protocols for student-coaches' preparation, hybrid models, a retention test, the interaction of gender and skill level, and use research designs that attend to the complexity of the teaching-learning process.

Science Study Aids 4: Plant Pigments - Studies in Color Changes.

ERIC Educational Resources Information Center

McConnell, Bill; McCready, R. M.

This publication is the fourth of a series of seven supplementary investigative materials for use in secondary science classes providing up-to-date research-related investigations. This unit is structured for grades 9 through 12. It deals with physical factors that affect color changes in plant foods during processing and in the preparation of…

EVALUE : a computer program for evaluating investments in forest products industries

Treesearch

Peter J. Ince; Philip H. Steele

1980-01-01

EVALUE, a FORTRAN program, was developed to provide a framework for cash flow analysis of investment opportunities. EVALUE was designed to assist researchers in evaluating investment feasibility of new technology or new manufacturing processes. This report serves as user documentation for the EVALUE program. EVALUE is briefly described and notes on preparation of a...

Immediate and Delayed Effects of Meta-Cognitive Instruction on Regulation of Cognition and Mathematics Achievement

ERIC Educational Resources Information Center

Mevarech, Zemira R.; Amrany, Chagit

2008-01-01

The present study addressed two research questions: (a) the extent to which students who were exposed to meta-cognitive instruction are able to implement meta-cognitive processes in a delayed, stressful situation, in our case--being examined on the matriculation exam; and (b) whether students preparing themselves for the matriculation exam in…

A Thesaurus for Information Technology and Education. Occasional Paper ITE/6/86.

ERIC Educational Resources Information Center

Lewis, R.

Prepared for use by the Information Technology and Education (ITE) Programme of the Economic and Social Science Research Council (ESRC), this draft document is based on the 1984 EUDISED (European Documentation and Information System for Education) Thesaurus for Information Processing. This draft is a modified thesaurus which aims to keep as close…

Perspectives on Learning: Methodologies for Exploring Learning Processes and Outcomes

ERIC Educational Resources Information Center

Goldman, Susan R.

2014-01-01

The papers in this Special Issue were initially prepared for an EARLI 2013 Symposium that was designed to examine methodologies in use by researchers from two sister communities, Learning and Instruction and Learning Sciences. The four papers reflect a common ground in advances in conceptions of learning since the early days of the "cognitive…

First-Destination Outcomes at a Public Research University: Aligning Our Survey with a Set of Standards

ERIC Educational Resources Information Center

Kelly, Heather A.; Walters, Allison M.

2016-01-01

Comprehensive data are essential to answer questions from prospective students, parents, and private and public entities about the cost of college and students' return on investment, as well as to demonstrate how colleges and universities are helping to prepare the future workforce. An evolutionary data-collection process, efforts to improve the…

Polymer infiltration studies

NASA Technical Reports Server (NTRS)

Marchello, Joseph M.

1992-01-01

The preparation is reported of carbon fiber composites using advanced polymer resins. Current and ongoing research activities include: powder towpreg process; weaving, braiding and stitching dry powder prepreg; advanced tow placement; and customized ATP towpreg. The goal of these studies is to produce advanced composite materials for automated part fabrication using textile and robotics technology in the manufacture of subsonic and supersonic aircraft.

Second Language Teacher Education: Review of Recent Research on Practice

ERIC Educational Resources Information Center

Wright, Tony

2010-01-01

Second language teacher education (SLTE) has undergone considerable change over the past 25 years. The question of how language teaching is learnt and how programmes of professional preparation can contribute to this process now elicits quite different answers. A new agenda of theory and practice has emerged as SLTE has incorporated many of the…

Summative and Formative Evaluations, National Skill Standards Project. Prepared for the National Grocers Association.

ERIC Educational Resources Information Center

Hamm, Michael S.

In 1993-1996, the Grocers Research and Educational Foundation of the National Grocers Association developed entry-level skill standards for the food marketing industry. A coalition formed early in the project directed the skill standard development process and solicited input from major organizations involved in the industry. The validity of the…

Developing Portfolios in Education: A Guide to Reflection, Inquiry, and Assessment [with CD-ROM

ERIC Educational Resources Information Center

Johnson, Ruth S.; Mims, J. Sabrina; Doyle-Nichols, Adelaide

2006-01-01

Within a conceptual and research framework about the usefulness of portfolios, this book suggests methods to organize the process, and provides tools that will be used not only during preparation programs but also for professional and academic advancement. Key features include: (1) Provides a conceptual framework for portfolio development: Readers…

Research Success and Structured Support: Developing Early Career Academics in Higher Education

ERIC Educational Resources Information Center

Geber, H.

2009-01-01

Entry into a successful academic career is often an arduous process. From career preparation through to doctoral studies and beyond, the journey can be fraught with trials. Why do many academics find difficulty in completing their studies in the minimum time and publishing afterwards? As the University of the Witwatersrand has a strategic goal of…

Effects of corn fiber gum (CFG) on the pasting and thermal behaviors of maize starch

USDA-ARS?s Scientific Manuscript database

Corn fiber gum (CFG) is a novel arabinoxylan hydrocolloid. Recent research showed its considerable potential in food processing. In this study, the interactions of maize starch and CFG were studied. Maize starch/CFG blend gels were prepared from maize starch suspension mixed with 0.1%, 0.25%, 0.5%, ...

Challenges in Reading: Twelfth Yearbook of the College Reading Association, 1990.

ERIC Educational Resources Information Center

Padak, Nancy D., Ed.; And Others

This yearbook contains the following 24 articles on a variety of topics: "A Model for Diagnostic Narratives in Teacher Education" (B. J. Walker); "Teacher Expectations: Modifying One's Teaching through the Self-Monitoring Process" (T. R. Blair and D. L. Jones); "Preparing Teacher/Researchers" (M. W. Olson and M. K. Gillis); "Student Teacher Use of…

An Assessment of the Role of Hong Kong Schools in Promoting Civic Learning

ERIC Educational Resources Information Center

Au, Wai Chun Cherry; Kennedy, Kerry John

2017-01-01

Hong Kong underwent tremendous changes after the transfer of its sovereignty to China in 1997. This study attempts to explore the changing role of schools in preparing students for future democratic citizenship in the post-colonial era. Different researchers have postulated that schools play a crucial role in the political socialization process in…

Preparation of Educational Researchers in Philosophical Foundations of Inquiry.

ERIC Educational Resources Information Center

Paul, James L.; Marfo, Kofi

2001-01-01

Discusses the nature, scope, and significance of basic philosophical issues in the preparation of researchers, focusing on two assertions: (1) that the curriculum for preparing educational researchers continues to be dominated by logical empiricism; and (2) that research education places a disproportionate emphasis on technical methods and…

Preparation of Surlyn films reinforced with cellulose nanofibres and feasibility of applying the transparent composite films for organic photovoltaic encapsulation

PubMed Central

Lertngim, Anantaya; Phiriyawirut, Manisara; Yuwawech, Kitti; Sangkhun, Weradesh; Kumnorkaew, Pisist; Muangnapoh, Tanyakorn

2017-01-01

This research concerns the development of Surlyn film reinforced with micro-/nanofibrillated celluloses (MFC) for use as an encapsulant in organic photovoltaic (OPV) cells. The aim of this work was to investigate the effects of fibre types and the mixing methods on the structure–properties of the composite films. Three types of cellulose micro/nanofibrils were prepared: the as-received MFC, the dispersed MFC and the esterified MFC. The fibres were mixed with Surlyn via an extrusion process, using two different mixing methods. It was found that the extent of fibre disintegration and tensile modulus of the composite films prepared by the master-batching process was superior to that of the composite system prepared by the direct mixing method. Using the esterified MFC as a reinforcement, compatibility between polymer and the fibre increased, accompanied with the improvement of the percentage elongation of the Surlyn composite film. The percentage of light transmittance of the Surlyn/MFC films was above 88, regardless of the fibre types and fibre concentrations. The water vapour transmission rate of the Surlyn/esterified MFC film was 65% lower than that of the neat Surlyn film. This contributed to the longer lifetime of the OPV encapsulated with the Surlyn/esterified MFC film. PMID:29134083

Preparation of Surlyn films reinforced with cellulose nanofibres and feasibility of applying the transparent composite films for organic photovoltaic encapsulation

NASA Astrophysics Data System (ADS)

Lertngim, Anantaya; Phiriyawirut, Manisara; Wootthikanokkhan, Jatuphorn; Yuwawech, Kitti; Sangkhun, Weradesh; Kumnorkaew, Pisist; Muangnapoh, Tanyakorn

2017-10-01

This research concerns the development of Surlyn film reinforced with micro-/nanofibrillated celluloses (MFC) for use as an encapsulant in organic photovoltaic (OPV) cells. The aim of this work was to investigate the effects of fibre types and the mixing methods on the structure-properties of the composite films. Three types of cellulose micro/nanofibrils were prepared: the as-received MFC, the dispersed MFC and the esterified MFC. The fibres were mixed with Surlyn via an extrusion process, using two different mixing methods. It was found that the extent of fibre disintegration and tensile modulus of the composite films prepared by the master-batching process was superior to that of the composite system prepared by the direct mixing method. Using the esterified MFC as a reinforcement, compatibility between polymer and the fibre increased, accompanied with the improvement of the percentage elongation of the Surlyn composite film. The percentage of light transmittance of the Surlyn/MFC films was above 88, regardless of the fibre types and fibre concentrations. The water vapour transmission rate of the Surlyn/esterified MFC film was 65% lower than that of the neat Surlyn film. This contributed to the longer lifetime of the OPV encapsulated with the Surlyn/esterified MFC film.

KSC-06pd0978

NASA Image and Video Library

2006-06-02

KENNEDY SPACE CENTER, FLA. - The European Space Agency's Columbus module rests on a work stand in view of media representatives and invited guests following a ceremony to welcome the module into the Space Station Processing Facility (SSPF). Columbus is the European Space Agency's research laboratory for the International Space Station. The module will be prepared in the SSPF for delivery to the space station on a future space shuttle mission. Columbus will expand the research facilities of the station and provide researchers with the ability to conduct numerous experiments in the life, physical and materials sciences. Photo credit: NASA/Amanda Diller

KSC-06pd0966

NASA Image and Video Library

2006-06-01

KENNEDY SPACE CENTER, FLA. - Inside the Space Station Processing Facility at NASA's Kennedy Space Center, the Columbus module waits to be lifted out of its transportation canister. An overhead crane is being lowered toward the module, which is the European Space Agency's research laboratory for the International Space Station. The module will be moved to a work stand and prepared for delivery to the space station on a future space shuttle mission. Columbus will expand the research facilities of the station and provide researchers with the ability to conduct numerous experiments in the area of life, physical and materials sciences. Photo credit: NASA/Jim Grossmann

KSC-06pd0967

NASA Image and Video Library

2006-06-01

KENNEDY SPACE CENTER, FLA. - Inside the Space Station Processing Facility at NASA's Kennedy Space Center, an overhead crane is lowered onto the Columbus module to lift it out of its transportation canister. Columbus is the European Space Agency's research laboratory for the International Space Station. The module will be moved to a work stand and prepared for delivery to the space station on a future space shuttle mission. Columbus will expand the research facilities of the station and provide researchers with the ability to conduct numerous experiments in the area of life, physical and materials sciences. Photo credit: NASA/Jim Grossmann

Successful Strategies for Practice-Based Recruitment of Racial and Ethnic Minority Pregnant Women in a Randomized Controlled Trial: the IDEAS for a Healthy Baby Study.

PubMed

Goff, Sarah L; Youssef, Yara; Pekow, Penelope S; White, Katharine O; Guhn-Knight, Haley; Lagu, Tara; Mazor, Kathleen M; Lindenauer, Peter K

2016-12-01

Racial/ethnic minority patients are often underrepresented in clinical trials. Efforts to address barriers to participation may improve representation, thus enhancing our understanding of how research findings apply to more diverse populations. The IDEAS (Information, Description, Education, Assistance, and Support) for a Healthy Baby study was a randomized controlled trial (RCT) of an intervention to reduce barriers to using publicly reported quality data for low-income, racial/ethnic minority women. We used strategies grounded in a health equity framework to address barriers to recruitment and retention in three domains: preparation, process, and patient-centeredness. "Preparation" included teaching study staff about health inequities, role-playing skills to develop rapport and trust, and partnering with clinic staff. "Processes" included use of electronic registration systems to pre-screen potential candidates and determine when eligible participants were in clinic and an electronic database to track patients through the study. Use of a flexible protocol, stipends, and consideration of literacy levels promoted "patient-centeredness." We anticipated needing to recruit 800 women over 18 months to achieve a completion goal of 650. Using the recruitment and retention strategies outlined above, we recruited 746 women in 15 months, achieving higher recruitment (87.1 %) and retention rates (97.3 %) than we had anticipated. These successful recruitment and retention strategies used for a large RCT promoted inclusivity and accessibility. Researchers seeking to recruit racial and ethnic minority pregnant women in similar settings may find the preparation, process, and patient-centered strategies used in this study applicable for their own studies. ClinicalTrials.gov NCT01784575 , 1R21HS021864-01.

Design and Implementation of Integrated Software Research and Community Service at State Polytechnic of Manado

NASA Astrophysics Data System (ADS)

Saroinsong, T.; A. S Kondoj, M.; Kandiyoh, G.; Pontoh, G.

2018-01-01

The State Polytechnic of Manado (Polimdo) is one of the reliable institutions in North Sulawesi that first implemented ISO 9001. But the accreditation of the institution has not been satisfactory, it means there is still much to be prepared to achieve the expected target. One of the criteria of assessment of institutional accreditation is related to research activities and social work in accordance with the standard seven. Data documentation systems related to research activities and social work are not well integrated and well documented in all existing work units. This causes the process of gathering information related to the activities and the results of research and social work in order to support the accreditation activities of the institution is still not efficient. This study aims to build an integrated software in all work units in Polimdo to obtain documentation and data synchronization in support of activities or reporting of documents accreditation institution in accordance with standard seven specifically in terms of submission of research proposal and dedication. The software will be developed using RUP method with analysis using data flow diagram and ERM so that the result of this research is documentation and synchronization of data and information of research activity and community service which can be used in preparing documents report for accreditation institution.

Evaluation of the implementation of a quality system in a basic research laboratory: viability and impacts.

PubMed

Fraga, Hilda Carolina de Jesus Rios; Fukutani, Kiyoshi Ferreira; Celes, Fabiana Santana; Barral, Aldina Maria Prado; Oliveira, Camila Indiani de

2012-01-01

To evaluate the process of implementing a quality management system in a basic research laboratory of a public institution, particularly considering the feasibility and impacts of this improvement. This was a prospective and qualitative study. We employed the norm "NIT DICLA 035--Princípios das Boas Práticas de Laboratório (BPL)" and auxiliary documents of Organisation for Economic Co-operation and Development to complement the planning and implementation of a Quality System, in a basic research laboratory. In parallel, we used the PDCA tool to define the goals of each phase of the implementation process. This study enabled the laboratory to comply with the NIT DICLA 035 norm and to implement this norm during execution of a research study. Accordingly, documents were prepared and routines were established such as the registration of non-conformities, traceability of research data and equipment calibration. The implementation of a quality system, the setting of a laboratory focused on basic research is feasible once certain structural changes are made. Importantly, impacts were noticed during the process, which could be related to several improvements in the laboratory routine.

Are preservice teachers prepared to teach struggling readers?

PubMed

Washburn, Erin K; Joshi, R Malatesha; Binks Cantrell, Emily

2011-06-01

Reading disabilities such as dyslexia, a specific learning disability that affects an individual's ability to process written language, are estimated to affect 15-20% of the general population. Consequently, elementary school teachers encounter students who struggle with inaccurate or slow reading, poor spelling, poor writing, and other language processing difficulties. However, recent evidence may suggest that teacher preparation programs are not providing preservice teachers with information about basic language constructs and other components related to scientifically based reading instruction. As a consequence preservice teachers have not exhibited explicit knowledge of such concepts in previous studies. Few studies have sought to assess preservice teachers' knowledge about dyslexia in conjunction with knowledge of basic language concepts. The purpose of the present study was to examine elementary school preservice teachers' knowledge of basic language constructs and their perceptions and knowledge about dyslexia. Findings from the present study suggest that preservice teachers, on average, are able to display implicit skills related to certain basic language constructs (i.e., syllable counting), but fail to demonstrate explicit knowledge of others (i.e., phonics principles). Also, preservice teachers seem to hold the common misconception that dyslexia is a visual perception deficit rather than a problem with phonological processing. Implications for future research as well as teacher preparation are discussed.

Itraconazole solid dispersion prepared by a supercritical fluid technique: preparation, in vitro characterization, and bioavailability in beagle dogs.

PubMed

Yin, Xuezhi; Daintree, Linda Sharon; Ding, Sheng; Ledger, Daniel Mark; Wang, Bing; Zhao, Wenwen; Qi, Jianping; Wu, Wei; Han, Jiansheng

2015-01-01

This research aimed to develop a supercritical fluid (SCF) technique for preparing a particulate form of itraconazole (ITZ) with good dissolution and bioavailability characteristics. The ITZ particulate solid dispersion was formulated with hydroxypropyl methylcellulose, Pluronic F-127, and L-ascorbic acid. Aggregated particles showed porous structure when examined by scanning electron microscopy. Powder X-ray diffraction and Fourier transform infrared spectra indicated an interaction between ITZ and excipients and showed that ITZ existed in an amorphous state in the composite solid dispersion particles. The solid dispersion obtained by the SCF process improved the dissolution of ITZ in media of pH 1.0, pH 4.5, and pH 6.8, compared with a commercial product (Sporanox(®)), which could be ascribed to the porous aggregated particle shape and amorphous solid state of ITZ. While the solid dispersion did not show a statistical improvement (P=0.50) in terms of oral bioavailability of ITZ compared with Sporanox(®), the C max (the maximum plasma concentration of ITZ in a pharmacokinetic curve) of ITZ was raised significantly (P=0.03) after oral administration. Thus, the SCF process has been shown to be an efficient, single step process to form ITZ-containing solid dispersion particles with good dissolution and oral bioavailability characteristics.

'Preparative waiting' and coping theory with patients going through gastric diagnosis.

PubMed

Giske, Tove; Gjengedal, Eva

2007-01-01

This paper reports a study of how hospitalized patients with gastro-intestinal problems going through diagnostic workups experience and handle the situation. It presents a theory of 'preparative waiting' and discusses it in relation to Lazarus' theory of appraisal, stress and coping. The pre-diagnostic phase is reported to be the most stressful time of the illness for patients, but there is little research on this with patients in gastric units. According to Lazarus, appraisal and coping are concurrent, and stress must be understood as both an intra- and an inter-personal process. A grounded theory design was chosen to conduct and analyse 18 in-depth interviews with 15 patients in a gastric unit at a Norwegian university hospital. The data were collected in 2002-2003. Participants' main concern was found to be how to prepare themselves for the results of the investigation and for life afterwards. The substantive grounded theory of 'Preparative waiting' presented here explains how they acted to do so. To be in the diagnostic phase meant to be in a process of continuously attempting to make sense of one's situation. Participants could judge their case to be harmful, a threat, a challenge, a benefit, or combinations of these. Their searches for realistic interpretation were balanced with searches for hopeful signs. This, together with lowering and rising of awareness, prevented them from despair. The process of understanding and handling the situation was concurrent, and was influenced by their relationships with family, friends, fellow patients, healthcare personnel and God. To the degree that patients trusted that nurses understood and were sensitive to the complex processes of appraising and coping, they became patients' key support persons. By providing adjusted information, coordinating care and examinations, respecting privacy, and inquiring about existential concerns, nurses could promote patients' ability to prepare for receiving the diagnosis and life after.

Learning for clinical leadership.

PubMed

Cook, Michael J; Leathard, Helen L

2004-11-01

Clinical leadership has been acclaimed widely as a major factor influencing the quality of patient care but research has revealed a paucity of preparation for this significant role. Leadership literature has rarely addressed clinical leadership specifically or referred to the difficulties in characterizing effective clinical leaders. The research informing this paper focused on clinical leadership and identified five attributes of effective clinical leaders: creativity, highlighting, influencing, respecting, and supporting. Effective clinical leaders adopted a transformational leadership style and improved care, through others, by including transformational (soft) knowledge as an integral part of their effective practice repertoire. Phronesis is introduced as practical wisdom that is gained through immersion in relevant experience, and as an essential element of preparation for clinical nursing leadership practice. It is argued, that learning to transform care requires opportunities to work within an environment that engenders and supports aspiring leaders. The paper describes the research process, elucidates the attributes through illustrative examples from the research data, and discusses an emergent educational strategy for the development of these attributes by clinicians in their practice environments. The paper also describes the application of this research through an interdisciplinary programme for staff leading teams in both health and social services sectors.

KSC-97PC1462

NASA Image and Video Library

1997-09-15

United States Microgravity Payload-4 (USMP-4) experiments are prepared to be flown on Space Shuttle mission STS-87 in the Space Station Processing Facility at Kennedy Space Center (KSC). A technician is working on the Advanced Automated Directional Solidification Furnace (AADSF), which will be used by researchers to study the solidification of semiconductor materials in microgravity. Scientists will be able to better understand how microgravity influences the solidification process of these materials and develop better methods for controlling that process during future Space flights and Earth-based production. All STS-87 experiments are scheduled for launch on Nov. 19 from KSC

A simulation study on garment manufacturing process

NASA Astrophysics Data System (ADS)

Liong, Choong-Yeun; Rahim, Nur Azreen Abdul

2015-02-01

Garment industry is an important industry and continues to evolve in order to meet the consumers' high demands. Therefore, elements of innovation and improvement are important. In this work, research studies were conducted at a local company in order to model the sewing process of clothes manufacturing by using simulation modeling. Clothes manufacturing at the company involves 14 main processes, which are connecting the pattern, center sewing and side neating, pockets sewing, backside-sewing, attaching the front and back, sleeves preparation, attaching the sleeves and over lock, collar preparation, collar sewing, bottomedge sewing, buttonholing sewing, removing excess thread, marking button, and button cross sewing. Those fourteen processes are operated by six tailors only. The last four sets of processes are done by a single tailor. Data collection was conducted by on site observation and the probability distribution of processing time for each of the processes is determined by using @Risk's Bestfit. Then a simulation model is developed using Arena Software based on the data collected. Animated simulation model is developed in order to facilitate understanding and verifying that the model represents the actual system. With such model, what if analysis and different scenarios of operations can be experimented with virtually. The animation and improvement models will be presented in further work.

Veg-03 Pillows Preparation for Flight

NASA Image and Video Library

2016-03-23

Inside a laboratory in the Space Station Processing Facility at NASA’s Kennedy Space Center in Florida, Michele Koralewicz, a mechanical technician with EASI on the Engineering Services Contract, prepares to sew the end of a bag that contains one of the Veg-03 plant pillows. The Veg-03 experiment will be delivered to the International Space Station aboard the eighth SpaceX Dragon commercial resupply mission. The Veg-03 plant pillows will contain ‘Tokyo Bekana’ cabbage seeds and lettuce seeds for NASA’s third Veggie plant growth system experiment. The experiment will continue NASA’s deep space plant growth research to benefit the Earth and the agency’s journey to Mars.

Methodological standards for in vitro models of epilepsy and epileptic seizures. A TASK1-WG4 report of the AES/ILAE Translational Task Force of the ILAE.

PubMed

Raimondo, Joseph V; Heinemann, Uwe; de Curtis, Marco; Goodkin, Howard P; Dulla, Chris G; Janigro, Damir; Ikeda, Akio; Lin, Chou-Ching K; Jiruska, Premysl; Galanopoulou, Aristea S; Bernard, Christophe

2017-11-01

In vitro preparations are a powerful tool to explore the mechanisms and processes underlying epileptogenesis and ictogenesis. In this review, we critically review the numerous in vitro methodologies utilized in epilepsy research. We provide support for the inclusion of detailed descriptions of techniques, including often ignored parameters with unpredictable yet significant effects on study reproducibility and outcomes. In addition, we explore how recent developments in brain slice preparation relate to their use as models of epileptic activity. Wiley Periodicals, Inc. © 2017 International League Against Epilepsy.

Synthesis of silver nanoparticles: chemical, physical and biological methods

PubMed Central

Iravani, S.; Korbekandi, H.; Mirmohammadi, S.V.; Zolfaghari, B.

2014-01-01

Silver nanoparticles (NPs) have been the subjects of researchers because of their unique properties (e.g., size and shape depending optical, antimicrobial, and electrical properties). A variety of preparation techniques have been reported for the synthesis of silver NPs; notable examples include, laser ablation, gamma irradiation, electron irradiation, chemical reduction, photochemical methods, microwave processing, and biological synthetic methods. This review presents an overview of silver nanoparticle preparation by physical, chemical, and biological synthesis. The aim of this review article is, therefore, to reflect on the current state and future prospects, especially the potentials and limitations of the above mentioned techniques for industries. PMID:26339255

Production of bio ethanol from waste potatoes

NASA Astrophysics Data System (ADS)

Jaber Noufal, Mohamad; Li, Baizhan; Maalla, Zena Ali

2017-03-01

In this research, production of ethanol from waste potatoes fermentation was studied using Saccharomyces cerevisiae. Potato Flour prepared from potato tubers after cooking and drying at 85°C. A homogenous slurry of potato flour prepared in water at solid-liquid ratio 1:10. Liquefaction of potato starch slurry was done with α-amylase at 80°C for 40 min followed by saccharification process which was done with glucoamylase at 65°C for two hr. Fermentation of hydrolysate with Saccharomyces cerevisiae at 35°C for two days resulted in the production of 33 g/l ethanol. The following parameters have been analysed: temperature, time of fermentation and pH. It found that Saccharification process is affected by enzyme Amylase 300 concentration and concentration of 1000μl/100ml gives the efficient effect of the process. The best temperature for fermentation process was found to be about 35°C. Also, it noticed that ethanol production increased as a time of fermentation increased but after 48 hr further growth in fermentation time did not have an appreciable effect. Finally, the optimal value of pH for fermentation process was about 5 to 6.

A review of traditional and current methods used to potentially reduce toxicity of Aconitum roots in Traditional Chinese Medicine.

PubMed

Liu, Shuai; Li, Fei; Li, Yan; Li, Weifei; Xu, Jinkai; Du, Hong

2017-07-31

Aconitum species are well-known for their medicinal value and high lethal toxicity in many Asian countries, notably China, India and Japan. The tubers are only used after processing in Traditional Chinese Medicine (TCM). They can be used safely and effectively with the methods of decoction, rational compatibility, and correct processing based on traditional experiences and new technologies. However, high toxicological risks still remain due to improper preparation and usage in China and other countries. Therefore, there is a need to clarify the methods of processing and compatibility to ensure their effectiveness and minimize the potential risks. The aim of this paper is to provide a review of traditional and current methods used to potentially reduce toxicity of Aconitum roots in TCM. The use of Aconitum has been investigated and the methods of processing and compatibility throughout history, including recent research, have been reviewed. Using of the methods of rational preparation, reasonable compatibility, and proper processing based on traditional experiences and new technologies, can enable Aconitum to be used safely and effectively. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

Skype Me! Astronomers, Students, and Cutting-Edge Research

NASA Astrophysics Data System (ADS)

Hickox, Ryan C.; Gauthier, Adrienne J.

2014-06-01

A primary goal of many university science courses is to promote understanding of the process of contemporary scientific inquiry. One powerful way to achieve this is for students to explore current research and then interact directly with the leading scientist, the feasibility of which has recently increased dramatically due to free online video communication tools. We report on a program implemented at Dartmouth College in which students connect with a guest astronomer through Skype (video chat). The Skype session is wrapped in a larger activity where students explore current research articles, interact with the astronomer, and then reflect on the experience. The in-class Skype discussions require a small time commitment from scientists (20-30 minutes, with little or no need for preparation) while providing students direct access to researchers at the cutting edge of modern astronomy. We outline the procedures used to implement these discussions, and present qualitative assessments of student's understanding of the process of research, as well as feedback from the guest astronomers.

Understanding the NIH review process: a brief guide to writing grant proposals in neurotoxicology.

PubMed

Audesirk, G; Burbacher, T; Guilarte, T R; Laughlin, N K; Lopachin, R; Suszkiw, J; Tilson, H

1999-02-01

During the past two years, the National Institutes of Health have made significant changes in the review process for investigator-initiated research grant applications in neurotoxicology. First, study sections that formerly dealt with toxicology and alcohol, respectively, have been merged. Neurotoxicology grant applications are now reviewed by ALTX-3, a study section in which the majority of members have expertise in the neuronal, biochemical or behavioral effects of alcohol, but usually not other neurotoxicants. Second, the NIH has instituted new review criteria, in which significance, approach, innovation, investigator expertise, and research environment must all be explicitly addressed by the reviews. In this article, past and present members of the ALTX-3 study section describe the NIH review process, with emphasis on how neurotoxicology applications are handled, and provide guidelines for preparing competitive applications.

Preparation and characterization of Polyacrylonitrile/ Manganese Dioxides- based Carbon Nanofibers via electrospinning process

NASA Astrophysics Data System (ADS)

Che Othman, F. E.; Yusof, N.; Jaafar, J.; Ismail, A. F.; Hasbullah, H.; Abdullah, N.; Ismail, M. S.

2016-06-01

This research reports the production of precursor polyacrylonitrile (PAN)/ manganese dioxide (MnO2) nanofibers (NFs) via electrospinning method followed by stabilization and carbonization processes. Nowadays, electrospinning has become a suitable method in manufacturing continuous NFs, thus it is employed to fabricate NFs in this study. The microstructural properties and adsorption competencies of the produced NFs were also studied. The NFs were prepared by electrospinning the polymer solution of Polyacrylonitrile (PAN) and Manganese Dioxide (MnO2) in, N, N-Dimethylformamide (DMF) solvent. The factors considered in this study were various polymer PAN/MnO2 concentrations which will significantly affect the specific surface area, fiber morphology and the diameter of the NFs prepared. Subsequently, heat treatment is applied by setting up the stabilization temperature at 275 °C and carbonization temperature at 800 °C with constant dwelling time (30 min). Nitrogen gas at constant rate 0.2 L/min was used for stabilization and carbonization with the stabilization rate (2 °C/min) and carbonization rate (5 °C/min). The carbon nanofibers (CNFs) produced were characterized using Scanning Electron Microscopy (SEM), Brunauer Emmett and Teller (BET) surface area and Fourier Transmission Infrared Spectroscopy (FTIR). It was found that the PAN/MnO2 CNFs were successfully produced with the carbonization temperature of 800 °C. The prepared PAN/MnO2 CNFs prepared showed an enhanced in specific surface area about two times compared to it precursor NFs.

[Studies on hydroxyapatite applicatied in coprecipitate of total salvianolic acids phospholipid complex].

PubMed

Chen, Xiao-Yun; Zhang, Zhen-Hai; Liu, Dan; Sun, E; Jia, Xiao-Bin

2014-03-01

The purpose of this research was to prepare total salvianolic acids-phytosome-HA coprecipitate to improve drug dissolution and its micromeritic properties. Firstly, the coprecipitate was prepared by solvent method and in vitro dissolution of tripterine was performed with the salvianolic acid B and danshensu as criteria. At the same time, the micromeritic properties was characterizated, the structure of samples was characterized by TEM, DSC, XRD and FTIR. Results showed that when the ratio of drug to HA was 1:2, it had a better dissolution, the accumulative drug-release percent in vitro at 60 min was over 90%. At the same time, it has good liquidity and low moisture absorption. Its micromeritic properties have improved. It is proved that the drug still existed amorphously by microstructure analysis. The preparation process is simple and feasible, it has practical value.

The Ames-Lockheed orbiter processing scheduling system

NASA Technical Reports Server (NTRS)

Zweben, Monte; Gargan, Robert

1991-01-01

A general purpose scheduling system and its application to Space Shuttle Orbiter Processing at the Kennedy Space Center (KSC) are described. Orbiter processing entails all the inspection, testing, repair, and maintenance necessary to prepare the Shuttle for launch and takes place within the Orbiter Processing Facility (OPF) at KSC, the Vehicle Assembly Building (VAB), and on the launch pad. The problems are extremely combinatoric in that there are thousands of tasks, resources, and other temporal considerations that must be coordinated. Researchers are building a scheduling tool that they hope will be an integral part of automating the planning and scheduling process at KSC. The scheduling engine is domain independent and is also being applied to Space Shuttle cargo processing problems as well as wind tunnel scheduling problems.

Development of ion beam sputtering techniques for actinide target preparation

NASA Astrophysics Data System (ADS)

Aaron, W. S.; Zevenbergen, L. A.; Adair, H. L.

1985-06-01

Ion beam sputtering is a routine method for the preparation of thin films used as targets because it allows the use of a minimum quantity of starting material, and losses are much lower than most other vacuum deposition techniques. Work is underway in the Isotope Research Materials Laboratory (IRML) at ORNL to develop the techniques that will make the preparation of actinide targets up to 100 μg/cm 2 by ion beam sputtering a routinely available service from IRML. The preparation of the actinide material in a form suitable for sputtering is a key to this technique, as is designing a sputtering system that allows the flexibility required for custom-ordered target production. At present, development work is being conducted on low-activity actinides in a bench-top system. The system will then be installed in a hood or glove box approved for radioactive materials handling where processing of radium, actinium, and plutonium isotopes among others will be performed.

PREPARE: guidelines for planning animal research and testing

PubMed Central

Smith, Adrian J; Clutton, R Eddie; Lilley, Elliot; Hansen, Kristine E Aa; Brattelid, Trond

2017-01-01

There is widespread concern about the quality, reproducibility and translatability of studies involving research animals. Although there are a number of reporting guidelines available, there is very little overarching guidance on how to plan animal experiments, despite the fact that this is the logical place to start ensuring quality. In this paper we present the PREPARE guidelines: Planning Research and Experimental Procedures on Animals: Recommendations for Excellence. PREPARE covers the three broad areas which determine the quality of the preparation for animal studies: formulation, dialogue between scientists and the animal facility, and quality control of the various components in the study. Some topics overlap and the PREPARE checklist should be adapted to suit specific needs, for example in field research. Advice on use of the checklist is available on the Norecopa website, with links to guidelines for animal research and testing, at https://norecopa.no/PREPARE. PMID:28771074

PREPARE: guidelines for planning animal research and testing.

PubMed

Smith, Adrian J; Clutton, R Eddie; Lilley, Elliot; Hansen, Kristine E Aa; Brattelid, Trond

2018-04-01

There is widespread concern about the quality, reproducibility and translatability of studies involving research animals. Although there are a number of reporting guidelines available, there is very little overarching guidance on how to plan animal experiments, despite the fact that this is the logical place to start ensuring quality. In this paper we present the PREPARE guidelines: Planning Research and Experimental Procedures on Animals: Recommendations for Excellence. PREPARE covers the three broad areas which determine the quality of the preparation for animal studies: formulation, dialogue between scientists and the animal facility, and quality control of the various components in the study. Some topics overlap and the PREPARE checklist should be adapted to suit specific needs, for example in field research. Advice on use of the checklist is available on the Norecopa website, with links to guidelines for animal research and testing, at https://norecopa.no/PREPARE .

Gaining insight into the Clinical Practice Guideline development processes: qualitative study in a workshop to implement the GRADE proposal in Spain

PubMed Central

Calderón, Carlos; Rotaeche, Rafael; Etxebarria, Arritxu; Marzo, Mercé; Rico, Rosa; Barandiaran, Marta

2006-01-01

Background The GRADE method represents a new approach to grading the quality of evidence and strength of recommendations in the preparation of Clinical Practice Guidelines (CPG). In the context of a pilot study to assess the implementability of the system in Spain, we considered it relevant to gain an insight into the significance of the perceptions and attitudes expressed by the actual experts participating in the system try-out. Methods Qualitative research with an ethnographic approach, through non-participant observation and focus groups within the context of a consensus workshop in which 19 CPG experts participated to evaluate the GRADE proposal using 12 evidence tables taken from hypertension, asthma and arthritis CPGs. The interventions were recorded, under a guarantee of confidentiality. The transcriptions and field notes were analyzed, based on a sociological discourse analysis model, and the provisional findings were re-sent to participants in order to improve their validity. Results 1) Certain problems over procedure and terminology hindered the acceptance of this new method as a common reference system for the preparation of CPGs. 2). A greater closeness to clinical practice was accompanied by concerns over value judgments and subjectivity, with a demand for greater explicitness in the consensus process. 3). The type of "evidence" on which the guidelines are based, how and by whom the evidence is prepared, and what the role of the different actors should be, all constitute unresolved concerns in the CPG preparation and implementation processes. 4). The grading process is not neutral: professional background, prior experience and the degree of leadership all condition the participants' input and interactions. Conclusion The findings obtained allow the quantitative evaluation to be better interpreted and, in turn, go beyond the particularities of the GRADE method. Adaptation to the complexities of clinical practice, the need for carefully designed multi-disciplinary work and the reflexivity present in the CPG preparation process, all represent lines of debate that are necessary to improve the CPG quality in the Spanish health care sector. PMID:17059600

Research’s Practice and Barriers of Knowledge Translation in Iran

PubMed Central

NEDJAT, Saharnaz; GHOLAMI, Jaleh; YAZDIZADEH, Bahareh; NEDJAT, Sima; MALEKI, Katayoun; MAJDZADEH, Reza

2014-01-01

Abstract Background Knowledge Translation is a process that includes synthesis, dissemination, exchange and application of knowledge to improve the health, services and products In this study we have attempted to examine the knowledge translation practice and its perceived barriers on the universalities and research institutes (research sector) in Iran. Methods Both qualitative and quantitative approaches were used. In the quantitative section, a questionnaire had prepared for this study was completed by 88 authors country wide from randomly selected papers. In the qualitative section 13 in-depth interviews and 6 focus group discussions were held with managers and policy makers, clinical and health service providers, and researchers. Results Twenty four percent of the authors had no interaction whatsoever with the target audience. Lack of expectation toward creating change in the target audience, researchers’ incentives, low level of trust among researchers and decision makers, absence of a predefined mechanism for delivery of research results and inappropriate research priorities were among the most important barriers identified in the qualitative section. Conclusion Translation of research findings into some concrete outputs which can affect health of people is not in mandate of researchers and subsequently they are not prepared for this as well. Based on the barriers identified, it seems that the following interventions are necessary: cooperation among policy makers at macro and meso (organizational) level and the research sector; establishing networks for researchers and decision makers in choosing the research topic, priority setting, and building trust among researchers and policy makers. PMID:25909064

School Inclusion Policy and Curricular Practices: Teaching Strategies for the Conceptual Preparation of the Target Public of Special Education

ERIC Educational Resources Information Center

Hostins, Regina Célia Linhares; Jordão, Suelen Garay Figueiredo

2015-01-01

In Brazil the inclusive education policy and curriculum practices aimed at disabled students have been the subject of research and debate. These students, despite having guaranteed access to regular education, find their schooling processes restricted due to lack of knowledge of their learning characteristics. In both regular classes and…

Total Ownership Cost Reduction Case Study: AEGIS Microwave Power Tubes

DTIC Science & Technology

2006-05-31

processes. The center would also maintain crucial capabilities and knowledge required for test and evaluation, Logistics, and for certain...of the research presented herein. Reproduction of all or part of this report is authorized. The report was prepared by...burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching

Integration of Basic Skills into Vocational Education: Expert Systems in Electronics Technology. Vocational Education Research.

ERIC Educational Resources Information Center

University of Southwestern Louisiana, Lafayette.

A student who plans to enter the field of technology education must be especially motivated to incorporate computer technology into the theories of learning. Evaluation prior to the learning process establishes a frame of reference for students. After preparing students with the basic concepts of resistors and the mental tools, the expert system…

Visualizing Progress

NASA Technical Reports Server (NTRS)

2000-01-01

Reality Capture Technologies, Inc. is a spinoff company from Ames Research Center. Offering e-business solutions for optimizing management, design and production processes, RCT uses visual collaboration environments (VCEs) such as those used to prepare the Mars Pathfinder mission.The product, 4-D Reality Framework, allows multiple users from different locations to manage and share data. The insurance industry is one targeted commercial application for this technology.

Podcast Effectiveness as Scaffolding Support for Students Enrolled in First-Semester General Chemistry Laboratories

ERIC Educational Resources Information Center

Powell, Mary Cynthia Barton

2010-01-01

Podcasts covering essential first-semester general chemistry laboratory techniques and central concepts that aid in experimental design or data processing were prepared and made available for students to access on an as-needed basis on iPhones [arrow right] or iPod touches [arrow right]. Research focused in three areas: the extent of podcast…

Tailoring Pore Size of Nitrogen-Doped Hollow Carbon Nanospheres for Confi ning Sulfur in Lithium–Sulfur Batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Weidong; Wang, Chong M.; Zhang, Quiglin

Three types of nitrogen-doped hollow carbon spheres with different pore sized porous shells are prepared to investigate the performance of sulfur confinement. The reason that why no sulfur is observed in previous research is determined and it is successfully demonstrated that the sulfur/polysulfide will overflow the porous carbon during the lithiation process.

A Guide for Planning Facilities for Occupational Preparation Programs in Data Processing. Interim Report. Research 25.

ERIC Educational Resources Information Center

McIntosh, William A.

This guide lists a series of pivotal questions about the educational program to be offered, and the answers to these questions bear directly on the numbers and kinds of instructional areas needed in the contemplated facilities. Much of the material is presented in a checklist format which allows for consideration of alternatives in facility…

Lightweight, high-opacity Bible paper by fiber loading

Treesearch

Klaus Doelle; Oliver Heise; John H. Klungness; Said M. AbuBakr

2000-01-01

This paper has been prepared in order to discuss Fiber Loading™ for lightweight, high-opacity bible paper. Incorporating fillers within pulp fibers has been subject to research since 1960 (Green et al. 1962, Scallan et al. 1985, Allen et al. 1992). Fiber Loading™ is a method for manufacturing precipitated calcium carbonate (PCC) directly within the pulp processing...

Guiding Preservice Teachers to Critically Reflect: Towards a Renewed Sense about English Learners

ERIC Educational Resources Information Center

Markos, Amy Michele

2011-01-01

The purpose of this practitioner inquiry was to explore the use of Guided Critical Reflection (GCR) in preparing preservice teachers for English learners (ELs). As a teacher researcher, I documented, analyzed, and discussed the ways in which students in my course used the process of GCR to transform their passively held understandings about ELs.…

Non-Empirically Based Teaching Materials Can Be Positively Misleading: A Case of Modal Auxiliary Verbs in Malaysian English Language Textbooks

ERIC Educational Resources Information Center

Khojasteh, Laleh; Kafipour, Reza

2012-01-01

Using corpus approach, a growing number of researchers blamed textbooks for neglecting important information on the use of grammatical structures in natural English. Likewise, the prescribed Malaysian English textbooks used in schools are reportedly prepared through a process of material development that involves intuition. Hence, a corpus-based…

Chemical and Mechanical Characterization of Diamond-Like Carbon Hard Coatings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poker, D B; Doughty, C

1999-12-28

This CRADA was intended to investigate and optimize the process used by ASTEX-PlasmaQuest for deposition of diamond-like carbon films. Approval for funding was delayed, and an unexpected move of the PlasmaQuest headquarters and research facilities prevented appropriate samples from being prepared before the end of the CRADA. Therefore, No effort was expended under this program.

Preparing for Life in the Global Village: Producing Global Citizen Subjects in UK Schools

ERIC Educational Resources Information Center

Allan, Alexandra; Charles, Claire

2015-01-01

This paper adds to a growing body of literature which views global citizenship education as part of a broader social and cultural process of subjectivity production. Rather than focus on global citizenship in relation to pedagogy or curriculum content, as much of the previous research literature has done, this paper examines it in relation to the…

Conceptual Representations for Transfer: A Case Study Tracing Back and Looking Forward

ERIC Educational Resources Information Center

Sinha, Suparna; Gray, Steven; Hmelo-Silver, Cindy E.; Jordan, Rebecca; Eberbach, Catherine; Goel, Ashok; Rugaber, Spencer

2013-01-01

A primary goal of instruction is to prepare learners to transfer their knowledge and skills to new contexts, but how far this transfer goes is an open question. In the research reported here, we seek to explain a case of transfer through examining the processes by which a conceptual representation used to reason about complex systems was…

The art of obtaining grants.

PubMed

Devine, Emily Beth

2009-03-15

The grantsmanship process is described from the perspective of the investigator. Successful grant writing involves considerable preparation. There are thousands of grant-making agencies, both public and private, and many of the grants offered can be found in online databases. Investigators should focus their grant-seeking efforts on firms and research subjects of interest. Factors that determine the type of funding pursued include the source of funds, the activity pursued by the investigator, the research subject area, the geographic area, the investigator's career level, the investigator's affiliation with a professional society, and the size of the grant. To strategize for long-term success, there are two ways a new investigator can begin-by serving as a coinvestigator on a grant held by a more-senior investigator or by pursuing a small grant as a principal investigator. When reviewing grant proposals, reviewers usually focus on a proposal's significance and impact, originality, usefulness and generalizability, scope, approach to research, feasibility, and sufficiency of resources to complete the project. Once a grant is awarded, investigators must ensure they are well versed in conducting ethical research, complying with regulations of the Health Insurance Portability and Accountability Act, preparing human subjects applications, managing grant budgets, and managing the project and personnel. Most grant makers require the presentation and publication of project results. Writing a grant proposal involves significant preparation. To be a successful grant writer, the investigator should have a strong interest in the research topic at hand. At the same time, he or she should have a clear understanding of the sponsor's perspective and interests.

Tissue simulating gel for medical research

NASA Technical Reports Server (NTRS)

Companion, John A. (Inventor)

1991-01-01

A tissue simulating gel and a method for preparing the tissue simulating gel are disclosed. The tissue simulating gel is prepared by a process using water, gelatin, ethylene glycol, and a cross-linking agent. In order to closely approximate the characteristics of the type of tissue being simulated, other material has been added to change the electrical, sound conducting, and wave scattering properties of the tissue simulating gel. The result of the entire process is a formulation that will not melt at the elevated temperatures involved in hyperthermia medical research. Furthermore, the tissue simulating gel will not support mold or bacterial growth, is of a sufficient mechanical strength to maintain a desired shape without a supporting shell, and is non-hardening and non-drying. Substances have been injected into the tissue simulating gel prior to the setting-up thereof just as they could be injected into actual tissue, and the tissue simulating gel is translucent so as to permit visual inspection of its interior. A polyurethane spray often used for coating circuit boards can be applied to the surface of the tissue simulating gel to give a texture similar to human skin, making the tissue simulating gel easier to handle and contributing to its longevity.

Hydrogel: Preparation, characterization, and applications: A review

PubMed Central

Ahmed, Enas M.

2013-01-01

Hydrogel products constitute a group of polymeric materials, the hydrophilic structure of which renders them capable of holding large amounts of water in their three-dimensional networks. Extensive employment of these products in a number of industrial and environmental areas of application is considered to be of prime importance. As expected, natural hydrogels were gradually replaced by synthetic types due to their higher water absorption capacity, long service life, and wide varieties of raw chemical resources. Literature on this subject was found to be expanding, especially in the scientific areas of research. However, a number of publications and technical reports dealing with hydrogel products from the engineering points of view were examined to overview technological aspects covering this growing multidisciplinary field of research. The primary objective of this article is to review the literature concerning classification of hydrogels on different bases, physical and chemical characteristics of these products, and technical feasibility of their utilization. It also involved technologies adopted for hydrogel production together with process design implications, block diagrams, and optimized conditions of the preparation process. An innovated category of recent generations of hydrogel materials was also presented in some details. PMID:25750745

Anthraquinone Content in Noni (Morinda citrifolia L.).

PubMed

Bussmann, Rainer W; Hennig, Lothar; Giannis, Athanassios; Ortwein, Jutta; Kutchan, Toni M; Feng, Xi

2013-01-01

Noni has been used in traditional medicine and as food for thousands of years. While the fruits serve as food and internal medicine, leaves were traditionally used only topically. In recent years, concern regarding the possible content of anthraquinones in noni has led to scrutiny by the European Food Safety Authority. Little research existed on the content of anthraquinones in different noni preparations, with no information about the potential effect of harvest and preparation methods. Our research focused on lucidin, alizarin, and rubiadin, the most important anthraquinones from a health perspective. We found that the production process (fermentation/juice production versus drying/lyophilization) has no effect on the anthraquinone content. The source product, however, does have implications: noni fruit puree from which seeds had been removed as well as consumer products produced from such puree had no detectable amounts of any anthraquinones. Products that did contain seed or leaf material in all cases did contain partly significant amounts of anthraquinones. To alleviate safety concerns, we suggest that noni products, whether fermented or unfermented juice or powder, should be derived only from fully ripe noni fruits, and that any seed material needs to be removed during the production process.

Anthraquinone Content in Noni (Morinda citrifolia L.)

PubMed Central

Bussmann, Rainer W.; Hennig, Lothar; Giannis, Athanassios; Ortwein, Jutta; Kutchan, Toni M.; Feng, Xi

2013-01-01

Noni has been used in traditional medicine and as food for thousands of years. While the fruits serve as food and internal medicine, leaves were traditionally used only topically. In recent years, concern regarding the possible content of anthraquinones in noni has led to scrutiny by the European Food Safety Authority. Little research existed on the content of anthraquinones in different noni preparations, with no information about the potential effect of harvest and preparation methods. Our research focused on lucidin, alizarin, and rubiadin, the most important anthraquinones from a health perspective. We found that the production process (fermentation/juice production versus drying/lyophilization) has no effect on the anthraquinone content. The source product, however, does have implications: noni fruit puree from which seeds had been removed as well as consumer products produced from such puree had no detectable amounts of any anthraquinones. Products that did contain seed or leaf material in all cases did contain partly significant amounts of anthraquinones. To alleviate safety concerns, we suggest that noni products, whether fermented or unfermented juice or powder, should be derived only from fully ripe noni fruits, and that any seed material needs to be removed during the production process. PMID:24062780

Tissue simulating gel for medical research

NASA Technical Reports Server (NTRS)

Companion, John A. (Inventor)

1989-01-01

A tissue simulating gel and a method for preparing the tissue simulating gel are disclosed. The tissue simulating gel is prepared by a process using water, gelatin, ethylene gylcol, and a cross-linking agent. In order to closely approximate the characteristics of the type of tissue being simulated, other material has been added to change the electrical, sound conducting, and wave scattering properties of the tissue simulating gel. The result of the entire process is a formulation that will not melt at the elevated temperatures involved in hyperthermia medical research. Furthermore, the tissue simulating gel will not support mold or bacterial growth, is of a sufficient mechanical strength to maintain a desired shape without a supporting shell, and is non-hardening and non-drying. Substances were injected into the tissue simulating gel prior to the setting-up thereof just as they could be injected into actual tissue, and the tissue simulating gel is translucent so as to permit visual inspection of its interior. A polyurethane spray often used for coating circuit boards can be applied to the surface of the tissue simulating gel to give a texture similar to human skin, making the tissue simulating gel easier to handle and contributing to its longevity.

The use of image analysis in evaluation of the fibers orientation in Wood-polymer composites (WPC)

NASA Astrophysics Data System (ADS)

Bednarz, Arkadiusz; Frącz, Wiesław; Janowski, Grzegorz

2016-12-01

In this paper a novel way of a digital analysis of fibers orientation with a five-step algorithmwas presented. In the study, a molded piece with a dumbbell shape prepared from wood-polymer composite was used. The injection molding process was examined in experimental and numerical way. Based on the developed mathematical algorithm, a significant compliance of fiber orientation in different areas of the molded piece was obtained. The main aim of thisworkwas fiber orientation analysis of wood-polymer composites. An additional goal of thiswork was the comparison of the results reached in numerical analysis with results obtained from an experiment. The results of this research were important for the scientific and also from the practical point of view. In future works the prepared algorithm could be used to reach optimal parameters of the injection molding process.

The dispersion of fine chitosan particles by beads-milling

NASA Astrophysics Data System (ADS)

Rochima, Emma; Utami, Safira; Hamdani, Herman; Azhary, Sundoro Yoga; Praseptiangga, Danar; Joni, I. Made; Panatarani, Camellia

2018-02-01

This research aimed to produce fine chitosan particles from a crab shell waste by beads-milling method by two different concentration of PEG as dispersing agent (150 and 300 wt. %). The characterization was performed to obtain the size and size distribution, the characteristics of functional groups and the degree of deacetylation. The results showed that the chitosan fine particles was obtained with a milling time 120 minutes with the best concentration of PEG 400 150 wt. %. The average particle size of the as-prepared suspension is 584 nm after addition of acetic acid solution (1%, v/v). Beads milling process did not change the glucosamine and N-acetylglucosamine content on chitosan structure which is indicated by degree of deacetylation higher than 70%. It was concluded that beads milling process can be applied to prepare chitosan fineparticles by proper adjustment in the milling time, pH and dosage of dispersing agent.

Pd-Ni-MWCNT nanocomposite thin films: preparation and structure

NASA Astrophysics Data System (ADS)

Kozłowski, Mirosław; Czerwosz, ElŻbieta; Sobczak, Kamil

2017-08-01

The properties of nanocomposite palladium-nickel-multi-walled (Pd-Ni-MWCNT) films deposited on aluminum oxide (Al2O3) substrate have been prepared and investigated. These films were obtained by 3 step process consisted of PVD/CVD/PVD methods. The morphology and structure of the obtained films were characterized by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) techniques at various stages of the film formation. EDX spectrometer was used to measurements of elements segregation in the obtained film. TEM and STEM (Scanning Transmission Electron Microscopy) observations showed MWCNTs decorated with palladium nanoparticles in the film obtained in the last step of film formation (final PVD process). The average size of the palladium nanoparticles observed both on MWCNTs and carbonaceous matrix does not exceed 5 nm. The research was conducted on the use of the obtained films as potential sensors of gases (e.g. H2, NH3, CO2) and bio-sensors or optical sensors.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wei, Chan Yi, E-mail: vicchanyiwei@hotmail.com; Ongkudon, Clarence M., E-mail: clarence@ums.edu.my; Kansil, Tamar, E-mail: tamarkansil87@gmail.com

Modern day synthesis protocols of methacrylate monolithic polymer adsorbent are based on existing polymerization blueprint without a thorough understanding of the dynamics of pore structure and formation. This has resulted in unproductiveness of polymer adsorbent consequently affecting purity and recovery of final product, productivity, retention time and cost effectiveness of the whole process. The problems magnified in monolith scaling-up where internal heat buildup resulting from external heating and high exothermic polymerization reaction was reflected in cracking of the adsorbent. We believe that through careful and precise control of the polymerization kinetics and parameters, it is possible to prepare macroporous methacrylatemore » monolithic adsorbents with controlled pore structures despite being carried out in an unstirred mould. This research involved the study of the effect of scaling-up on pore morphology of monolith, in other words, porous polymethacrylate adsorbents that were prepared via bulk free radical polymerization process by imaging the porous morphology of polymethacrylate with scanning electron microscope.« less

Preparation of the Second Shipment of Spent Nuclear Fuel from the Ustav Jaderneho Vyzkumu Rez (UJV Rez), a.s., Czech Republic to the Russian Federation for Reprocessing - 13478

DOE Office of Scientific and Technical Information (OSTI.GOV)

Trtilek, Radek; Podlaha, Josef

After more than 50 years of operation of the LVR-15 research reactor operated by the UJV Rez, a. s. (formerly Nuclear Research Institute - NRI), a large amount of the spent nuclear fuel (SNF) of Russian origin has been accumulated. In 2005 UJV Rez, a. s. jointed the Russian Research Reactor Fuel Return (RRRFR) program under the United States (US) - Russian Global Threat Reduction Initiative (GTRI) and started the process of SNF shipment from the LVR-15 research reactor back to the Russian Federation (RF). In 2007 the first shipment of SNF was realized. In 2011, preparation of the secondmore » shipment of spent fuel from the Czech Republic started. The experience obtained from the first shipment will be widely used, but some differences must be taken into the account. The second shipment will be realized in 2013 and will conclude the return transport of all, both fresh and spent, high-enriched nuclear fuel from the Czech Republic to the Russian Federation. After the shipment is completed, there will be only low-enriched nuclear fuel on the territory of the Czech Republic, containing maximum of 20% of U-235, which is the conventionally recognized limit between the low- and high-enriched nuclear materials. The experience (technical, organizational, administrative, logistic) obtained from the each SNF shipment as from the Czech Republic as from other countries using the Russian type research reactors are evaluated and projected onto preparation of next shipment of high enriched nuclear fuel back to the Russian Federation. The results shown all shipments provided by the UJV Rez, a. s. in the frame of the GTRI Program have been performed successfully and safely. It is expected the experience and results will be applied to preparation and completing of the Chinese Miniature Neutron Source Reactors (MNSR) Spent Nuclear Fuel Repatriation in the near future. (authors)« less

A Training Program to Enhance Postgraduate Students' Research Skills in Preparing a Research Proposal in the Field of Curriculum and Instruction Methods of Arabic Language

ERIC Educational Resources Information Center

Alfakih, Ahmed Hassan

2017-01-01

The study examined the impact of a training program on enhancing postgraduate students' research skills in preparing a research proposal. The nature of the skills required to prepare a research proposal were first determined using a questionnaire. A training program for improving such skills was then constructed and seven postgraduate students in…

Titania nanotube powders obtained by rapid breakdown anodization in perchloric acid electrolytes

NASA Astrophysics Data System (ADS)

Ali, Saima; Hannula, Simo-Pekka

2017-05-01

Titania nanotube (TNT) powders are prepared by rapid break down anodization (RBA) in a 0.1 M perchloric acid (HClO4) solution (Process 1), and ethylene glycol (EG) mixture with HClO4 and water (Process 2). A study of the as-prepared and calcined TNT powders obtained by both processes is implemented to evaluate and compare the morphology, crystal structure, specific surface area, and the composition of the nanotubes. Longer TNTs are formed in Process 1, while comparatively larger pore diameter and wall thickness are obtained for the nanotubes prepared by Process 2. The TNTs obtained by Process 1 are converted to nanorods at 350 °C, while nanotubes obtained by Process 2 preserve tubular morphology till 350 °C. In addition, the TNTs prepared by an aqueous electrolyte have a crystalline structure, whereas the TNTs obtained by Process 2 are amorphous. Samples calcined till 450 °C have XRD peaks from the anatase phase, while the rutile phase appears at 550 °C for the TNTs prepared by both processes. The Raman spectra also show clear anatase peaks for all samples except the as-prepared sample obtained by Process 2, thus supporting the XRD findings. FTIR spectra reveal the presence of O-H groups in the structure for the TNTs obtained by both processes. However, the presence is less prominent for annealed samples. Additionally, TNTs obtained by Process 2 have a carbonaceous impurity present in the structure attributed to the electrolyte used in that process. While a negligible weight loss is typical for TNTs prepared from aqueous electrolytes, a weight loss of 38.6% in the temperature range of 25-600 °C is found for TNTs prepared in EG electrolyte (Process 2). A large specific surface area of 179.2 m2 g-1 is obtained for TNTs prepared by Process 1, whereas Process 2 produces nanotubes with a lower specific surface area. The difference appears to correspond to the dimensions of the nanotubes obtained by the two processes.

Web-based Toolkit for Dynamic Generation of Data Processors

NASA Astrophysics Data System (ADS)

Patel, J.; Dascalu, S.; Harris, F. C.; Benedict, K. K.; Gollberg, G.; Sheneman, L.

2011-12-01

All computation-intensive scientific research uses structured datasets, including hydrology and all other types of climate-related research. When it comes to testing their hypotheses, researchers might use the same dataset differently, and modify, transform, or convert it to meet their research needs. Currently, many researchers spend a good amount of time performing data processing and building tools to speed up this process. They might routinely repeat the same process activities for new research projects, spending precious time that otherwise could be dedicated to analyzing and interpreting the data. Numerous tools are available to run tests on prepared datasets and many of them work with datasets in different formats. However, there is still a significant need for applications that can comprehensively handle data transformation and conversion activities and help prepare the various processed datasets required by the researchers. We propose a web-based application (a software toolkit) that dynamically generates data processors capable of performing data conversions, transformations, and customizations based on user-defined mappings and selections. As a first step, the proposed solution allows the users to define various data structures and, in the next step, can select various file formats and data conversions for their datasets of interest. In a simple scenario, the core of the proposed web-based toolkit allows the users to define direct mappings between input and output data structures. The toolkit will also support defining complex mappings involving the use of pre-defined sets of mathematical, statistical, date/time, and text manipulation functions. Furthermore, the users will be allowed to define logical cases for input data filtering and sampling. At the end of the process, the toolkit is designed to generate reusable source code and executable binary files for download and use by the scientists. The application is also designed to store all data structures and mappings defined by a user (an author), and allow the original author to modify them using standard authoring techniques. The users can change or define new mappings to create new data processors for download and use. In essence, when executed, the generated data processor binary file can take an input data file in a given format and output this data, possibly transformed, in a different file format. If they so desire, the users will be able modify directly the source code in order to define more complex mappings and transformations that are not currently supported by the toolkit. Initially aimed at supporting research in hydrology, the toolkit's functions and features can be either directly used or easily extended to other areas of climate-related research. The proposed web-based data processing toolkit will be able to generate various custom software processors for data conversion and transformation in a matter of seconds or minutes, saving a significant amount of researchers' time and allowing them to focus on core research issues.

Fulfillment of GMP standard, halal standard, and applying HACCP for production process of beef floss (Case study: Ksatria enterprise)

NASA Astrophysics Data System (ADS)

A'diat, Arkan Addien Al; Liquiddanu, Eko; Laksono, Pringgo Widyo; Sutopo, Wahyudi; Suletra, I. Wayan

2018-02-01

Along with the increasing number of the modern retail business in Indonesia, give an opportunity to small and medium enterprise (SME) to sell its products through the modern retailer. There are some obstacles faced by the SMEs, one of them is about product standard. Product standard that must be owned by SMEs are GMP standard and halal standard. This research was conducted to know the fulfillment by the beef floss enterprise in jagalan in fulfilling the GMP standard and halal. In addition, Hazard Analysis and Critical Control Points (HACCP) system was applied to analyze the process. HACCP which used in this research was based on the seven principles in SNI (Indonesian National Standard) 01-4852-1998. The seven principles included hazard analysis, critical control point (CCP) determination, critical limit establishment, CCP monitor system establishment, corrective action establishment, verification, and also documentation establishment that must be applied in preparing HACCP plan. Based on this case study, it is concluded that there were 5 CCPs : the boiling process, roasting process, frying process, the beef floss draining process, and the packaging process.

Designing assignment using authentic assessment

NASA Astrophysics Data System (ADS)

Arlianty, Widinda Normalia; Febriana, Beta Wulan; Diniaty, Artina; Fauzi'ah, Lina

2017-12-01

This research is conducted to get an overview of the use of authentic assessment in the department of chemistry education, Islamic University of Indonesia. This research was conducted on the students of semester five, odd semester of academic year 2016/2017. Authentic assessment is an assessment process that is capable of measuring the knowledge, attitudes and skills of learners. Chemistry teacher candidates are required to be equipped with teaching and judging skills. Teachers were required can design and carry out assessment of the process and learning outcomes of students in an objective, accountable, and informative. Teacher creativity is required in the assessment. Therefore, authentic assessment is very appropriate used to improve the competence of students in education department as teachers candidates in the preparation of learning assessments.

Characterization of coal liquids derived from the H-coal process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holmes, S.A.; Woodward, P.W.; Sturm, G.P. Jr.

1976-11-01

Compositional data of coal liquid products derived from the H-Coal process were obtained. Two overhead products (one from the fuel oil mode of operation and the other from the syncrude mode of operation) were prepared by Hydrocarbon Research, Inc. from Illinois No. 6 coal. The compositional data of these products are tabulated, and characteristics of the materials are discussed. Separation and characterization methods, with slight modification, as developed by the Bureau of Mines-API Research Project 60 for characterizing heavy ends of petroleum, were successfully used in analyzing coal liquid distillates within the boiling range 200/sup 0/ to 540/sup 0/C. Distillatesmore » boiling below 200/sup 0/C were separated and analyzed using chromatographic and spectral techniques.« less

Communicating Scientific Research to Non-Specialists

NASA Astrophysics Data System (ADS)

Holman, Megan

Public outreach to effectively communicate current scientific advances is an essential component of the scientific process. The challenge in making this information accessible is forming a clear, accurate, and concise version of the information from a variety of different sources, so that the information is understandable and compelling to non-specialists in the general public. We are preparing a magazine article about planetary system formation. This article will include background information about star formation and different theories and observations of planet formation to provide context. We will then discuss the latest research and theories describing how planetary systems may be forming in different areas of the universe. We demonstrate here the original professional-level scientific work alongside our public-level explanations and original graphics to demonstrate our editorial process.

Preparing Perservice Teachers to Teach Elementary School Science

ERIC Educational Resources Information Center

Lewis, Amy D.

2017-01-01

The development of scientifically literate citizens begins in the elementary school. Yet elementary school teachers are ill prepared to teach science (Trygstad, Smith, Banilower, Nelson, & Horizon Research, Inc., 2013). The research base on teacher preparation finds that programs designed to prepare elementary teachers are inadequate in…

Preparing Elementary Prospective Teachers to Teach Early Algebra

ERIC Educational Resources Information Center

Hohensee, Charles

2017-01-01

Researchers have argued that integrating early algebra into elementary grades will better prepare students for algebra. However, currently little research exists to guide teacher preparation programs on how to prepare prospective elementary teachers to teach early algebra. This study examines the insights and challenges that prospective teachers…

Reconciling research and community priorities in participatory trials: application to Padres Informados/Jovenes Preparados.

PubMed

Allen, Michele L; Garcia-Huidobro, Diego; Bastian, Tiana; Hurtado, G Ali; Linares, Roxana; Svetaz, María Veronica

2017-06-01

Participatory research (PR) trials aim to achieve the dual, and at times competing, demands of producing an intervention and research process that address community perspectives and priorities, while establishing intervention effectiveness. To identify research and community priorities that must be reconciled in the areas of collaborative processes, study design and aim and study implementation quality in order to successfully conduct a participatory trial. We describe how this reconciliation was approached in the smoking prevention participatory trial Padres Informados/Jovenes Preparados (Informed Parents/Prepared Youth) and evaluate the success of our reconciled priorities. Data sources to evaluate success of the reconciliations included a survey of all partners regarding collaborative group processes, intervention participant recruitment and attendance and surveys of enrolled study participants assessing intervention outcomes. While we successfully achieved our reconciled collaborative processes and implementation quality goals, we did not achieve our reconciled goals in study aim and design. Due in part to the randomized wait-list control group design chosen in the reconciliation process, we were not able to demonstrate overall efficacy of the intervention or offer timely services to families in need of support. Achieving the goals of participatory trials is challenging but may yield community and research benefits. Innovative research designs are needed to better support the complex goals of participatory trials. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Fabrication and Thermoelectric Properties of n-Type CoSb2.85Te0.15 Using Selective Laser Melting.

PubMed

Yan, Yonggao; Ke, Hongquan; Yang, Jihui; Uher, Ctirad; Tang, Xinfeng

2018-04-25

We report a nonequilibrium fabrication method of n-type CoSb 2.85 Te 0.15 skutterudites using selective laser melting (SLM) technology. A powder of CoSb 2.85 Te 0.15 was prepared by self-propagating high-temperature synthesis (SHS) and served as the raw material for the SLM process. The effect of SLM processing parameters such as the laser power and scanning speed on the quality of the forming CoSb 2.85 Te 0.15 thin layers was systematically analyzed, and the optimal processing window for SLM was determined. A brief postannealing at 450 °C for 4 h, following the SLM process, has resulted in a phase-pure CoSb 2.85 Te 0.15 bulk material deposited on a Ti substrate. The Seebeck coefficient of the annealed SLM prepared bulk material is close to that of the sample prepared by the traditional sintering method, and its maximum ZT value reached 0.56 at 823 K. Moreover, a Ti-Co-Sb ternary compound transition layer of about 70 μm in thickness was found at a dense interface between CoSb 2.85 Te 0.15 and the Ti substrate. The contact resistivity was measured as 37.1 μΩcm 2 . The results demonstrate that SLM, coupled with postannealing, can be used for fabrication of incongruently melting skutterudite compounds on heterogeneous substrates. This lays an important foundation for the follow-up research utilizing energy efficient SHS and SLM processes in rapid printing of thermoelectric modules.

Funding research in the twenty-first century: current opinions and future directions.

PubMed

Squitieri, Lee; Chung, Kevin C

2014-08-01

For all academic biomedical researchers, the process of submitting grants and securing research funding is a critical part of advancing one's career. In the current era of decreasing new grant awards and renewals leading to significantly worse success rates, it is hard for young aspiring physician-scientists to remain optimistic regarding their future in academic medicine. It is important that today's young surgeon-scientists prepare for and adapt to the inevitably changing climate of research funding. This article provides a primer on developing a successful career as a funded surgeon-scientist and pathways for building a robust research platform worthy of extramural National Institutes of Health funding in the twenty-first century. Copyright © 2014 Elsevier Inc. All rights reserved.

How prepared are UK medical graduates for practice? A rapid review of the literature 2009-2014.

PubMed

Monrouxe, Lynn V; Grundy, Lisa; Mann, Mala; John, Zoe; Panagoulas, Eleni; Bullock, Alison; Mattick, Karen

2017-01-13

To understand how prepared UK medical graduates are for practice and the effectiveness of workplace transition interventions. A rapid review of the literature (registration #CRD42013005305). Nine major databases (and key websites) were searched in two timeframes (July-September 2013; updated May-June 2014): CINAHL, Embase, Educational Resources Information Centre, Health Management Information Consortium, MEDLINE, MEDLINE in Process, PsycINFO, Scopus and Web of Knowledge. Primary research or studies reporting UK medical graduates' preparedness between 2009 and 2014: manuscripts in English; all study types; participants who are final-year medical students, medical graduates, clinical educators, patients or NHS employers and all outcome measures. At time 1, three researchers screened manuscripts (for duplicates, exclusion/inclusion criteria and quality). Remaining 81 manuscripts were coded. At time 2, one researcher repeated the process for 2013-2014 (adding six manuscripts). Data were analysed using a narrative synthesis and mapped against Tomorrow's Doctors (2009) graduate outcomes. Most studies comprised junior doctors' self-reports (65/87, 75%), few defined preparedness and a programmatic approach was lacking. Six themes were highlighted: individual skills/knowledge, interactional competence, systemic/technological competence, personal preparedness, demographic factors and transitional interventions. Graduates appear prepared for history taking, physical examinations and some clinical skills, but unprepared for other aspects, including prescribing, clinical reasoning/diagnoses, emergency management, multidisciplinary team-working, handover, error/safety incidents, understanding ethical/legal issues and ward environment familiarity. Shadowing and induction smooth transition into practice, but there is a paucity of evidence around assistantship efficacy. Educational interventions are needed to address areas of unpreparedness (eg, multidisciplinary team-working, prescribing and clinical reasoning). Future research in areas we are unsure about should adopt a programmatic and rigorous approach, with clear definitions of preparedness, multiple stakeholder perspectives along with multisite and longitudinal research designs to achieve a joined-up, systematic, approach to understanding future educational requirements for junior doctors. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Patient and public engagement in priority setting: A systematic rapid review of the literature

PubMed Central

Vandall-Walker, Virginia; Mason-Lai, Ping

2018-01-01

Background Current research suggests that while patients are becoming more engaged across the health delivery spectrum, this involvement occurs most often at the pre-preparation stage to identify ‘high-level’ priorities in health ecosystem priority setting, and at the preparation phase for health research. Objective The purpose of this systematic rapid review of the literature is to describe the evidence that does exist in relation to patient and public engagement priority setting in both health ecosystem and health research. Data sources HealthStar (via OVID); CINAHL; Proquest Databases; and Scholar’s Portal. Study eligibility criteria i) published in English; ii) published within the timeframe of 2007—Current (10 years) unless the report/article was formative in synthesizing key considerations of patient engagement in health ecosystem and health research priority setting; iii) conducted in Canada, the US, Europe, UK, Australia/New Zealand, or Scandinavian countries. Study appraisal and synthesis i) Is the research valid, sound, and applicable?; ii) what outcomes can we potentially expect if we implement the findings from this research?; iii) will the target population (i.e., health researchers and practitioners) be able to use this research?. A summary of findings from each of the respective processes was synthesized to highlight key information that would support decision-making for researchers when determining the best priority setting process to apply for their specific patient-oriented research. Results Seventy articles from the UK, US, Canada, Netherlands and Australia were selected for review. Results were organized into two tiers of public and patient engagement in prioritization: Tier 1—Deliberative and Tier 2—Consultative. Highly structured patient and public engagement planning activities include the James Lind Alliance Priority Setting Partnerships (UK), Dialogue Method (Netherlands), Global Evidence Mapping (Australia), and the Deep Inclusion Method/CHoosing All Together (US). Limitations The critical study limitations include challenges in comprehensively identifying the patient engagement literature for review, bias in article selection due to the identified scope, missed information due to a more limited use of exhaustive search strategies (e.g., in-depth hand searching), and the heterogeneity of reported study findings. Conclusion The four public and patient engagement priority setting processes identified were successful in setting priorities that are inclusive and objectively based, specific to the priorities of stakeholders engaged in the process. The processes were robust, strategic and aimed to promote equity in patient voices. Key limitations identified a lack of evaluation data on the success and extent in which patients were engaged. Issues pertaining to feasibility of stakeholder engagement, coordination, communication and limited resources were also considered. PMID:29499043

Vulnerability Assessments in Support of the Climate Ready ...

EPA Pesticide Factsheets

As part of the Climate Ready Estuaries (CRE) program, the Global Change Research Program (GCRP) in the National Center for Environmental Assessment, Office of Research and Development at the U.S. Environmental Protection Agency has prepared a report exploring a new methodology for climate change vulnerability assessments using Massachusetts Bays’ salt marsh ecosystem as a demonstration. The aim is to synthesize place-based information on the potential implications of climate change for key ecosystem processes in each estuary, in a form that will enable managers to undertake management adaptation planning.

Assessment of Translational and Interdisciplinary Clinical Research at an Oklahoma Health Sciences Center

PubMed Central

Dao, Hanh Dung; Kota, Pravina; James, Judith A.; Stoner, Julie A.; Akins, Darrin R.

2015-01-01

Purpose In response to National Institutes of Health initiatives to improve translation of basic science discoveries we surveyed faculty to assess patterns of and barriers to translational research in Oklahoma. Methods An online survey was administered to University of Oklahoma Health Sciences Center, College of Medicine faculty, which included demographic and research questions. Results Responses were received from 126 faculty members (24%). Two-thirds spent ≥20% time on research; among these, 90% conduct clinical and translational research. Identifying funding; recruiting research staff and participants; preparing reports and agreements; and protecting research time were commonly perceived as at least moderate barriers to conducting research. While respondents largely collaborated within their discipline, clinical investigators were more likely than basic science investigators to engage in interdisciplinary research. Conclusion While engagement in translational research is common, specific barriers impact the research process. This could be improved through an expanded interdisciplinary collaboration and research support structure. PMID:26242016

Status summary of chemical processing development in plutonium-238 supply program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collins, Emory D.; Benker, Dennis; Wham, Robert M.

This document summarizes the status of development of chemical processing in the Plutonium-238 Supply Program (PSP) near the end of Demonstration 1. The objective of the PSP is “to develop, demonstrate, and document a production process that meets program objectives and to prepare for its operation” (Frazier et al. 2016). Success in the effort includes establishing capability using the current infrastructure to produce Np targets for irradiation in Department of Energy research reactors, chemically processing the irradiated targets to separate and purify the produced Pu and transferring the PuO 2 product to Los Alamos National Laboratory (LANL) at an averagemore » rate of 1.5 kg/y.« less

The effect of an outdoor setting on the transfer of earth science concepts

NASA Astrophysics Data System (ADS)

Simmons, Jerry Marvin

The ability of students to transfer concepts learned in school to future learning and employment settings is critical to their academic and career success. Concept transfer can best be studied by defining it as a process rather than an isolated event. Preparation for future learning (PFL) is a process definition of transfer which recognizes the student's ability to draw from past experiences, make assumptions, and generate potential questions and strategies for problem resolution. The purpose of this study was to use the PFL definition of concept transfer to examine whether a knowledge-rich outdoor setting better prepares students for future learning of science concepts than the classroom setting alone does. The research hypothesis was that sixth-grade students experiencing a geology-rich outdoor setting would be better prepared to learn advanced earth science concepts than students experiencing classroom learning only. A quasi-experimental research design was used for this study on two non-equivalent, self-contained sixth-grade rural public school classes. After a pretest was given on prior geology knowledge, the outdoor treatment group was taken on a geology-rich field excursion which introduced them to the concepts of mineral formation and mining. The indoor treatment group received exposure to the same concepts in the classroom setting via color slides and identification of mineral specimens. Subsequently, both groups received direct instruction on advanced concepts about mineral formation and mining. They were then given a posttest, which presented the students with a problem-solving scenario and questions related to concepts covered in the direct instruction. A t-test done on pretest data revealed that the indoor treatment group had previously learned classroom geology material significantly better than the outdoor treatment group had. Therefore an analysis of covariance was performed on posttest data which showed that the outdoor treatment group was better prepared for future learning of advanced geology concepts than the indoor treatment group. Because the environment chosen for this study was by nature one that contained variables outside the control of the researcher, it can only be speculated that the outdoor environment was the agent of transfer. Subsequent studies need to be done to substantiate this hypothesis.

Computer generated animation and movie production at LARC: A case study

NASA Technical Reports Server (NTRS)

Gates, R. L.; Matthews, C. G.; Vonofenheim, W. H.; Randall, D. P.; Jones, K. H.

1984-01-01

The process of producing computer generated 16mm movies using the MOVIE.BYU software package developed by Brigham Young University and the currently available hardware technology at the Langley Research Center is described. A general overview relates the procedures to a specific application. Details are provided which describe the data used, preparation of a storyboard, key frame generation, the actual animation, title generation, filming, and processing/developing the final product. Problems encountered in each of these areas are identified. Both hardware and software problems are discussed along with proposed solutions and recommendations.

[An experimental research on the fabrication of the fused porcelain to CAD/CAM molar crown].

PubMed

Dai, Ning; Zhou, Yongyao; Liao, Wenhe; Yu, Qing; An, Tao; Jiao, Yiqun

2007-02-01

This paper introduced the fabrication process of the fused porcelain to molar crown with CAD/CAM technology. Firstly, preparation teeth data was retrieved by the 3D-optical measuring system. Then, we have reconstructed the inner surface designed the outer surface shape with the computer aided design software. Finally, the mini high-speed NC milling machine was used to produce the fused porcelain to CAD/CAM molar crown. The result has proved that the fabrication process is reliable and efficient. The dental restoration quality is steady and precise.

ECUT: Energy Conversion and utilization Technologies program biocatalysis research activity. Generation of chemical intermediates by catalytic oxidative decarboxylation of dilute organic acids

NASA Technical Reports Server (NTRS)

Distefano, S.; Gupta, A.; Ingham, J. D.

1983-01-01

A rhodium-based catalyst was prepared and preliminary experiments were completed where the catalyst appeared to decarboxylate dilute acids at concentrations of 1 to 10 vol%. Electron spin resonance spectroscoy was used to characterize the catalyst as a first step leading toward modeling and optimization of rhodium catalysts. Also, a hybrid chemical/biological process for the production of hydrocarbons has been assessed. These types of catalysts could greatly increase energy efficiency of this process.

Investigating Health Disparities through Community-Based Participatory Research: Lessons Learned from a Process Evaluation

PubMed Central

Bryan, Valerie; Brye, Willette; Hudson, Kenneth; Dubose, Leevones; Hansberry, Shantisha; Arrieta, Martha

2014-01-01

This article describes one university's efforts to partner with a local agency (the “Coalition”) within a disadvantaged, predominantly African American neighborhood, to assist them with studying their community's health disparities and health care access. The final, mutually agreed-upon plan used a community-based participatory research approach, wherein university researchers prepared neighborhood volunteers and Coalition members to conduct face-to-face interviews with residents about their health and health care access. Subsequently, the Coalition surveyed 138 residents, and the agency now possesses extensive data about the nature and extent of health problems in their community. Lessons learned from these experiences are offered. PMID:24871770

Slowing down light using a dendritic cell cluster metasurface waveguide

PubMed Central

Fang, Z. H.; Chen, H.; Yang, F. S.; Luo, C. R.; Zhao, X. P.

2016-01-01

Slowing down or even stopping light is the first task to realising optical information transmission and storage. Theoretical studies have revealed that metamaterials can slow down or even stop light; however, the difficulty of preparing metamaterials that operate in visible light hinders progress in the research of slowing or stopping light. Metasurfaces provide a new opportunity to make progress in such research. In this paper, we propose a dendritic cell cluster metasurface consisting of dendritic structures. The simulation results show that dendritic structure can realise abnormal reflection and refraction effects. Single- and double-layer dendritic metasurfaces that respond in visible light were prepared by electrochemical deposition. Abnormal Goos-Hänchen (GH) shifts were experimentally obtained. The rainbow trapping effect was observed in a waveguide constructed using the dendritic metasurface sample. The incident white light was separated into seven colours ranging from blue to red light. The measured transmission energy in the waveguide showed that the energy escaping from the waveguide was zero at the resonant frequency of the sample under a certain amount of incident light. The proposed metasurface has a simple preparation process, functions in visible light, and can be readily extended to the infrared band and communication wavelengths. PMID:27886279

Basic and applied research program. Semiannual report, July-December 1978

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butler, B.L.

1979-12-01

The status of research projects in the Basic and Applied Research Program at SERI is presented for the semiannual period ending December 31, 1978. The five tasks in this program are grouped into Materials Research and Development, Materials Processing and Development, Photoconversion Research, Exploratory Research, and Energy Resource and Assessment and have been carried out by personnel in the Materials, Bio/Chemical Conversion, and Energy Resource and Assessment Branches. Subtask elements in the task areas include coatings and films, polymers, metallurgy and corrosion, optical materials, surfaces and interfaces in materials research and development; photochemistry, photoelectrochemistry, and photobiology in photoconversion; thin glassmore » mirror development, silver degradation of mirrors, hail resistance of thin glass, thin glass manufacturing, cellular glass development, and sorption by desiccants in materials processing and development; and thermoelectric energy conversion, desiccant cooling, photothermal degradation, and amorphous materials in exploratory research. For each task or subtask element, the overview, scope, goals, approach, apparatus and equipment, and supporting subcontracts are presented, as applicable, in addition to the status of the projects in each task or subtask. Listing of publications and reports authored by personnel associated with the Basic and Applied Research Program and prepared or published during 1978 are also included.« less

Lunar Human Research Requirements (LHRR)

NASA Technical Reports Server (NTRS)

Denkins, Pamela

2009-01-01

Biomedical research will be conducted during transit and on the surface of the Moon to prepare for extended stays on the Moon and to prepare for the exploration of Mars. The objective of the Human Research Program (HRP) is to preserve the health and enhance performance of astronaut explorers. Specific objectives of the HRP include developing the knowledge, capabilities, and necessary countermeasures and technologies in support of human space exploration; focusing on mitigating the highest risks to crew health and performance; and defining and improving human spaceflight medical, environmental, behavioral, and human factors standards. This document contains a detailed description of the resource accommodations, interfaces, and environments to be provided by the Constellation Program (CxP) to support the HRP research in transit and on the lunar surface. Covered, specifically, are the requirements for mass and volume transport; crew availability; ground operations, baseline data collection, and payload processing; power, and data. Volumes and mass are given for transport of conditioned samples only. They do not account for the engineering solution that the Constellation Program will implement (refrigerator/freezer volume/mass). This document does not account for requirements on the Orion vehicle for transportation to and from the International Space Station (ISS). The ISS Program has supplied requirements for this mission.

Organizing for ontological change: The kernel of an AIDS research infrastructure

PubMed Central

Polk, Jessica Beth

2015-01-01

Is it possible to prepare and plan for emergent and changing objects of research? Members of the Multicenter AIDS Cohort Study have been investigating AIDS for over 30 years, and in that time, the disease has been repeatedly transformed. Over the years and across many changes, members have continued to study HIV disease while in the process regenerating an adaptable research organization. The key to sustaining this technoscientific flexibility has been what we call the kernel of a research infrastructure: ongoing efforts to maintain the availability of resources and services that may be brought to bear in the investigation of new objects. In the case of the Multicenter AIDS Cohort Study, these resources are as follows: specimens and data, calibrated instruments, heterogeneous experts, and participating cohorts of gay and bisexual men. We track three ontological transformations, examining how members prepared for and responded to changes: the discovery of a novel retroviral agent (HIV), the ability to test for that agent, and the transition of the disease from fatal to chronic through pharmaceutical intervention. Respectively, we call the work, ‘technologies’, and techniques of adapting to these changes, ‘repurposing’, ‘elaborating’, and ‘extending the kernel’. PMID:26477206

Comparative studies on exenatide-loaded poly (D,L-lactic-co-glycolic acid) microparticles prepared by a novel ultra-fine particle processing system and spray drying.

PubMed

Zhu, Chune; Huang, Ying; Zhang, Xiaoying; Mei, Liling; Pan, Xin; Li, Ge; Wu, Chuanbin

2015-08-01

The purpose of this study was to compare the properties of exenatide-loaded poly (D,L-lactic-co-glycolic acid) microparticles (Ex-PLGA-MPs) prepared by a novel ultra-fine particle processing system (UPPS) and spray drying. UPPS is a proprietary technology developed by our group based on the disk rotation principle. Characteristics of the MPs including morphology, particle size distribution, drug content, encapsulation efficiency and in vitro release were comparatively studied. Cytotoxicity of the MPs was examined on A549 cells and the pharmacodynamics was investigated in vivo in type 2 diabetes Sprague-Dawley (SD) rats. Ex-PLGA-MPs prepared by UPPS showed larger particle size, denser surface, greater encapsulation efficiency, less initial burst release, and stable sustained release for more than one month in vitro as compared with the spray drying MPs. Meanwhile, the UPPS MPs effectively controlled the body growth rate and blood glucose in diabetes rats for at least three weeks after a single injection, while the spray drying MPs showed effective control period of about two weeks. UPPS technology was demonstrated to manufacture Ex-PLGA-MPs as a potential sustained release protein/polypeptide delivery system, which is an alternative method for the most commonly used spray drying. This comparative research provides a new guidance for microparticle preparation technology. Copyright © 2015 Elsevier B.V. All rights reserved.

Value-added use of mushroom ergothioneine as a colour stabilizer in processed fish meats.

PubMed

Bao, Huynh N D; Osako, Kazufumi; Ohshima, Toshiaki

2010-08-15

Ergothioneine (ESH), a potent antioxidant, has been found in certain edible mushrooms. Our previous research showed that ESH extracted from the edible mushroom Flammulina velutipes has a positive effect on the colour stability of beef and tuna meat. The purpose of the present study was to compare the efficacy and applicability of ESH extracts prepared from different mushroom species as a colour stabilizer in fish meats. Levels of ESH higher than 2.8 mg mL(-1) were found in extracts prepared from the fruiting bodies of F. velutipes, Lentinula edodes, Pleurotus cornucopiae and Pleurotus eryngii and the processing waste of F. velutipes. When 1 mL of each of the extracts was added to 100 g of minced bigeye tuna and yellowtail meats, the bright-red colour remained after 5 and 2 days, respectively, of ice storage. The anti-discoloration efficacy of 1 mL of the extracts prepared from 10 g of the fresh waste portion of F. velutipes was similar to that of its fruiting body or 0.5 g kg(-1) of sodium ascorbate when added to 100 g of minced bigeye tuna meat under ice storage. The results of this study clearly showed that ESH prepared from different mushroom species stabilized the colour of fish meats, and the extract from the F. velutipes was the most effective. Copyright (c) 2010 Society of Chemical Industry.

Preparing students for the ethical challenges on international health electives: A systematic review of the literature on educational interventions.

PubMed

Rahim, Anika; Knights Née Jones, Felicity; Fyfe, Molly; Alagarajah, Janagan; Baraitser, Paula

2016-09-01

International health electives pose specific ethical challenges for students travelling from to low and middle income countries. We undertook a systematic review of the literature on interventions to prepare students to identify ethical issues addressed, educational approaches and to collate evidence on the effectiveness of different strategies. We searched nine electronic databases of peer-reviewed literature and identified grey literature through key word searches; supplemented through citation mapping and expert consultation. Articles that described ethical training conducted by universities or professional bodies were included for review. We reviewed forty-four full text articles. Ten sources of published literature and seven sources of grey literature met our inclusion criteria. We identified thirteen ethical situations that students should be prepared to manage and eight generic skills to support this process. Most interventions were delivered before the elective, used case studies or guidelines. Some suggested ethical principles or a framework for analysis of ethical issues. Only two papers evaluated the intervention described. Our paper collates a small but growing body of work on education to prepare students to manage ethical issues. Ethical training should have elements that are delivered before, during and after the elective. Interventions should include case studies covering thirteen ethical issues identified here, linked to ethical principles and a process for responding to ethical issues. We suggest that evaluations of interventions are an important area for future research.

[Study on "multi-dimensional structure and process dynamics quality control system" of Danshen infusion solution based on component structure theory].

PubMed

Feng, Liang; Zhang, Ming-Hua; Gu, Jun-Fei; Wang, Gui-You; Zhao, Zi-Yu; Jia, Xiao-Bin

2013-11-01

As traditional Chinese medicine (TCM) preparation products feature complex compounds and multiple preparation processes, the implementation of quality control in line with the characteristics of TCM preparation products provides a firm guarantee for the clinical efficacy and safety of TCM preparation products. Danshen infusion solution is a preparation commonly used in clinic, but its quality control is restricted to indexes of finished products, which can not guarantee its inherent quality. Our study group has proposed "multi-dimensional structure and process dynamics quality control system" on the basis of "component structure theory", for the purpose of controlling the quality of Danshen infusion solution at multiple levels and in multiple links from the efficacy-related material basis, the safety-related material basis, the characteristics of dosage form to the preparation process. This article, we bring forth new ideas and models to the quality control of TCM preparation products.

NASA and Deere to study effects of low-g on iron processing

NASA Technical Reports Server (NTRS)

1981-01-01

A technical exchange agreement to study the effects of processing iron alloys in microgravity is described. Alloy solidification experiments are to be performed in the low-g facilities at Marshall Space Center. Deere is to prepare and evaluate the samples, and perform thermal characterization studies of the furnace used for melting and solidifying the samples. Experiment planning and analysis are to be performed jointly and data shared between the two parties. The technical exchange concept, developed by NASA to involve the private sector in low gravity research programs, is described. Other low gravity processing fields in which industry is invited to participate are listed.

Rapid Radiochemical Methods for Asphalt Paving Material ...

EPA Pesticide Factsheets

Technical Brief Validated rapid radiochemical methods for alpha and beta emitters in solid matrices that are commonly encountered in urban environments were previously unavailable for public use by responding laboratories. A lack of tested rapid methods would delay the quick determination of contamination levels and the assessment of acceptable site-specific exposure levels. Of special concern are matrices with rough and porous surfaces, which allow the movement of radioactive material deep into the building material making it difficult to detect. This research focuses on methods that address preparation, radiochemical separation, and analysis of asphalt paving materials and asphalt roofing shingles. These matrices, common to outdoor environments, challenge the capability and capacity of very experienced radiochemistry laboratories. Generally, routine sample preparation and dissolution techniques produce liquid samples (representative of the original sample material) that can be processed using available radiochemical methods. The asphalt materials are especially difficult because they do not readily lend themselves to these routine sample preparation and dissolution techniques. The HSRP and ORIA coordinate radiological reference laboratory priorities and activities in conjunction with HSRP’s Partner Process. As part of the collaboration, the HSRP worked with ORIA to publish rapid radioanalytical methods for selected radionuclides in building material matrice

Study of sample preparation for determination of endocannabinoids and analogous compounds in human serum by LC-MS/MS in MRM mode.

PubMed

Luque-Córdoba, D; Calderón-Santiago, M; Luque de Castro, M D; Priego-Capote, F

2018-08-01

Endocannabinoids are lipids with a key role in physiological processes such as the immune response or the metabolism. This involvement explains their association to pathologies such as cancer, obesity or multiple sclerosis. The determination of endocannabinoids constitutes a challenge for clinical laboratories due to the variety of biological matrices and the wide range of concentrations at which they can be found. This research deals with the comparison of three sample preparation strategies (viz., on-line SPE, off-line SPE for interferents removal, and protein precipitation) for subsequent LC-MS/MS analysis of 14 endocannabinoids and analogous compounds in serum. As a result, the on-line coupling between SPE and LC-MS/MS is proposed as the best approach for this determination. The proposed method allows full automation of the overall process, shortening of the analysis time, and avoidance of errors associated with sample preparation steps. The improvement in sensitivity and selectivity thus achieved allows obtaining quantification limits at the pg mL -1 level, which makes possible the application of the method for clinical studies. Copyright © 2018 Elsevier B.V. All rights reserved.

Action Contribution to Competence Judgments: The Use of the Journey Schema

PubMed Central

Horchak, Oleksandr V.; Giger, Jean-Christophe; Garrido, Margarida V.

2016-01-01

The current research considered the question of how performing an action, or merely preparing the body for action, can have an impact on social judgments related to person perception. Participants were asked to ascribe competence and warmth characteristics to a target person by reading a metaphoric text while their body was manipulated to be prepared for the processing of action-congruent information. In Experiment 1, participants whose forward body action matched the metaphoric action described in the text ascribed more competence characteristics to a politician than did control participants. In Experiment 2, participants whose body was merely prepared for forward movement also ascribed more competence characteristics to a politician than did control participants. In addition, the data from Experiment 2 ruled out an alternative non-embodied explanation (i.e., that effect is due to basic associative processes) grounded in the existing literatures on attitudes by demonstrating that body manipulation had no effect on competence when a non-metaphoric text was used. Finally, no evidence was found that body manipulation affects warmth judgments. These studies converge in demonstrating that forward body movements enhance the favorability of competence judgments when these match the metaphoric forward movements described by text. PMID:27065918

Optimization of process condition for the preparation of amine-impregnated activated carbon developed for CO2 capture and applied to methylene blue adsorption by response surface methodology.

PubMed

Das, Dipa; Meikap, Bhim C

2017-10-15

The present research describes the optimal adsorption condition for methylene blue (MB). The adsorbent used here was monoethanol amine-impregnated activated carbon (MEA-AC) prepared from green coconut shell. Response surface methodology (RSM) is the multivariate statistical technique used for the optimization of the process variables. The central composite design is used to determine the effect of activation temperature, activation time and impregnation ratio on the MB removal. The percentage (%) MB adsorption by MEA-AC is evaluated as a response of the system. A quadratic model was developed for response. From the analysis of variance, the factor which was the most influential on the experimental design response has been identified. The optimum condition for the preparation of MEA-AC from green coconut shells is the temperature of activation 545.6°C, activation time of 41.64 min and impregnation ratio of 0.33 to achieve the maximum removal efficiency of 98.21%. At the same optimum parameter, the % MB removal from the textile-effluent industry was examined and found to be 96.44%.

ChemCam Mast Unit Being Prepared for Laser Firing

NASA Image and Video Library

2010-12-23

Researchers prepare for a test of the Chemistry and Camera ChemCam instrument that will fly on NASA Mars Science Laboratory mission; researchers are preparing the instrument mast unit for a laser firing test.

[Techniques for rapid production of monoclonal antibodies for use with antibody technology].

PubMed

Kamada, Haruhiko

2012-01-01

A monoclonal antibody (Mab), due to its specific binding ability to a target protein, can potentially be one of the most useful tools for the functional analysis of proteins in recent proteomics-based research. However, the production of Mab is a very time-consuming and laborious process (i.e., preparation of recombinant antigens, immunization of animals, preparation of hybridomas), making it the rate-limiting step in using Mabs in high-throughput proteomics research, which heavily relies on comprehensive and rapid methods. Therefore, there is a great demand for new methods to efficiently generate Mabs against a group of proteins identified by proteome analysis. Here, we describe a useful method called "Antibody proteomic technique" for the rapid generations of Mabs to pharmaceutical target, which were identified by proteomic analyses of disease samples (ex. tumor tissue, etc.). We also introduce another method to find profitable targets on vasculature, which is called "Vascular proteomic technique". Our results suggest that this method for the rapid generation of Mabs to proteins may be very useful in proteomics-based research as well as in clinical applications.

Thermal Protective Coating for High Temperature Polymer Composites

NASA Technical Reports Server (NTRS)

Barron, Andrew R.

1999-01-01

The central theme of this research is the application of carboxylate-alumoxane nanoparticles as precursors to thermally protective coatings for high temperature polymer composites. In addition, we will investigate the application of carboxylate-alumoxane nanoparticle as a component to polymer composites. The objective of this research was the high temperature protection of polymer composites via novel chemistry. The significance of this research is the development of a low cost and highly flexible synthetic methodology, with a compatible processing technique, for the fabrication of high temperature polymer composites. We proposed to accomplish this broad goal through the use of a class of ceramic precursor material, alumoxanes. Alumoxanes are nano-particles with a boehmite-like structure and an organic periphery. The technical goals of this program are to prepare and evaluate water soluble carboxylate-alumoxane for the preparation of ceramic coatings on polymer substrates. Our proposed approach is attractive since proof of concept has been demonstrated under the NRA 96-LeRC-1 Technology for Advanced High Temperature Gas Turbine Engines, HITEMP Program. For example, carbon and Kevlar(tm) fibers and matting have been successfully coated with ceramic thermally protective layers.

Not Driven by High-Stakes Tests: Exploring Science Assessment and College Readiness of Students from an Urban Portfolio Community High School

ERIC Educational Resources Information Center

Fleshman, Robin Earle

2017-01-01

This case study seeks to explore three research questions: (1) What science teaching and learning processes, perspectives, and cultures exist within the science classroom of an urban portfolio community high school? (2) In what ways does the portfolio-based approach prepare high school students of color for college level science coursework,…

A Longitudinal Examination of the Effects of Computer Self-Efficacy Growth on Performance during Technology Training

ERIC Educational Resources Information Center

Downey, James P.; Kher, Hemant V.

2015-01-01

Technology training in the classroom is critical in preparing students for upper level classes as well as professional careers, especially in fields such as technology. One of the key enablers to this process is computer self-efficacy (CSE), which has an extensive stream of empirical research. Despite this, one of the missing pieces is how CSE…

Latino Parental Access to Biliteracy Programs in Selected Latino-Majority Schools Based on the "Castaneda" Guidelines: Exploratory Study

ERIC Educational Resources Information Center

Palma, Griselda

2017-01-01

An exploratory study of Latino majority elementary (LME) schools was launched to investigate if parents of English Language Learners (ELLs) are provided due process to biliteracy programs in low-income schools in San Diego County. The main research question of the study asked: How are the instructional programs in LME schools preparing Latino ELLs…

Mentoring as a Profession-Building Process in Physical Education Teacher Education

ERIC Educational Resources Information Center

Chambers, Fiona C.; Armour, Kathleen; Luttrell, Sinead; Bleakley, Walter; Brennan, Deirdre; Herold, Frank

2012-01-01

This paper describes the findings of a one-year collaborative research project funded by the Standing Conference on Teacher Education North and South (SCoTENS). The paper is derived from a Short Report on this study prepared for SCoTENS on 16th May 2012. The study examined the role of physical education (PE) teachers as mentors to new members of…

The Effect of Using Socio-Scientific Issues Approach in Teaching Environmental Issues on Improving the Students' Ability of Making Appropriate Decisions towards These Issues

ERIC Educational Resources Information Center

Zo'bi, Abdallah Salim

2014-01-01

This study aimed to identify nature of students' decisions patterns towards environmental issues and the possibility to improve these decisions during teaching process using Socio-Scientific Issues Approach. And to achieve this, the researcher prepared and developed tools of the study represented by a test of open questions focused on…

Technology for Manufacturing Efficiency

NASA Technical Reports Server (NTRS)

1995-01-01

The Ground Processing Scheduling System (GPSS) was developed by Ames Research Center, Kennedy Space Center and divisions of the Lockheed Company to maintain the scheduling for preparing a Space Shuttle Orbiter for a mission. Red Pepper Software Company, now part of PeopleSoft, Inc., commercialized the software as their ResponseAgent product line. The software enables users to monitor manufacturing variables, report issues and develop solutions to existing problems.