An Experimental Investigation of Hypergolic Ignition Delay of Hydrogen Peroxide with Fuel Mixtures

NASA Technical Reports Server (NTRS)

Blevins, John A.; Gostowski, Rudy; Chianese, Silvio

2003-01-01

An experimental investigation of hypergolicity and ignition delay of fuel mixtures with hydrogen peroxide is presented. Example results of high speed photography and schleiren from drop tests are shown. Also, a discussion of the sensitivity to experimental parameters such as drop size and subsequent uncertainty considerations of ignition delay results is presented. It is shown that using the described setup on the mixtures presented, the precision uncertainty is on the order of 6% of average ignition delay and 5% of average decomposition delay. This represents sufficient repeatability for first order discrimination of ignition delay for propellant development and screening. Two mixtures, each using commonly available amines and transition metal compounds, are presented as examples that result in ignition delays on the order of 10 milliseconds.

Pitfalls in Teaching Judgment Heuristics

ERIC Educational Resources Information Center

Shepperd, James A.; Koch, Erika J.

2005-01-01

Demonstrations of judgment heuristics typically focus on how heuristics can lead to poor judgments. However, exclusive focus on the negative consequences of heuristics can prove problematic. We illustrate the problem with the representativeness heuristic and present a study (N = 45) that examined how examples influence understanding of the…

Effective and Accurate Colormap Selection

NASA Astrophysics Data System (ADS)

Thyng, K. M.; Greene, C. A.; Hetland, R. D.; Zimmerle, H.; DiMarco, S. F.

2016-12-01

Science is often communicated through plots, and design choices can elucidate or obscure the presented data. The colormap used can honestly and clearly display data in a visually-appealing way, or can falsely exaggerate data gradients and confuse viewers. Fortunately, there is a large resource of literature in color science on how color is perceived which we can use to inform our own choices. Following this literature, colormaps can be designed to be perceptually uniform; that is, so an equally-sized jump in the colormap at any location is perceived by the viewer as the same size. This ensures that gradients in the data are accurately percieved. The same colormap is often used to represent many different fields in the same paper or presentation. However, this can cause difficulty in quick interpretation of multiple plots. For example, in one plot the viewer may have trained their eye to recognize that red represents high salinity, and therefore higher density, while in the subsequent temperature plot they need to adjust their interpretation so that red represents high temperature and therefore lower density. In the same way that a single Greek letter is typically chosen to represent a field for a paper, we propose to choose a single colormap to represent a field in a paper, and use multiple colormaps for multiple fields. We have created a set of colormaps that are perceptually uniform, and follow several other design guidelines. There are 18 colormaps to give options to choose from for intuitive representation. For example, a colormap of greens may be used to represent chlorophyll concentration, or browns for turbidity. With careful consideration of human perception and design principles, colormaps may be chosen which faithfully represent the data while also engaging viewers.

Extended Full Computation-Tree Logic with Sequence Modal Operator: Representing Hierarchical Tree Structures

NASA Astrophysics Data System (ADS)

Kamide, Norihiro; Kaneiwa, Ken

An extended full computation-tree logic, CTLS*, is introduced as a Kripke semantics with a sequence modal operator. This logic can appropriately represent hierarchical tree structures where sequence modal operators in CTLS* are applied to tree structures. An embedding theorem of CTLS* into CTL* is proved. The validity, satisfiability and model-checking problems of CTLS* are shown to be decidable. An illustrative example of biological taxonomy is presented using CTLS* formulas.

Japan Studies Association Journal, 2001.

ERIC Educational Resources Information Center

Reichel, Philip L., Ed.

2001-01-01

This journal presents new perspectives and materials on Japan that are engaging, relatively jargon-free, and shaped so that their usefulness in a college classroom is readily apparent. The journal represents an example of the potential for genuine scholarship that lies within interdisciplinary studies. Articles grouped under the topic of…

Aspects and the Overlap Function.

ERIC Educational Resources Information Center

Levine, Marilyn M.; Levine, Leonard P.

1984-01-01

Presents system for automatic handling of ordered sets, states based on these sets, and differing points of view regarding Universe of Discourse. Aspects are represented by new logical "overlap" function with examples taken from Ranganathan's horse and carriage parable and several books involving four main concepts (history, geography,…

Causes in the construction of causal law: A psycho-ecological model.

PubMed

Young, Gerald

2010-01-01

The article presents an integrated psycho-ecological model of the construction of law, with implications for practice in law and mental health. The model is based on a series of concentric circles, each representing a layer of influence on the construction of law. The circle furthest removed from the center represents the influence of culture, society and industry, in particular, and the circle at the center of the circle represents the case at hand, for example, about individual complainant or mass action. The article begins by arguing that basic terms in relation to cause need clarification and also work is needed to disambiguate the concepts involved. After dealing with these issues, the article examines science and mental health. Is the scientific evidence presented by the expert sufficiently reliable and valid to meet admissibility standards of good compared to poor or junk science? Is the research undertaken for court or presented to court biased, with factors hidden, such as links to industry. Are individual evaluations conducted with biased science serving to justify partial conclusions? The dangers of powerful influences on the construction of law are highlighted, for example, related to the individual complainant malingering and the insurance industry protecting its financial interests at the expense of genuinely injured patients. In conclusion, suggestions for empirical research are offered. Copyright 2009 Elsevier Ltd. All rights reserved.

Soul Healing: A Model of Feminist Therapy.

ERIC Educational Resources Information Center

Berliner, Patricia M.

1992-01-01

Notes that feminist psychospiritual model of therapy can be used in working with clients who value spiritual dimension. Presents history, philosophy, and work of Women for a New World, multidisciplinary team of women representing psychology, religious education, and arts. Uses examples from developmental history of retreat-workshop paradigm and…

Highly accurate calculation of rotating neutron stars

NASA Astrophysics Data System (ADS)

Ansorg, M.; Kleinwächter, A.; Meinel, R.

2002-01-01

A new spectral code for constructing general-relativistic models of rapidly rotating stars with an unprecedented accuracy is presented. As a first application, we reexamine uniformly rotating homogeneous stars and compare our results with those obtained by several previous codes. Moreover, representative relativistic examples corresponding to highly flattened rotating bodies are given.

Schools of Interest 5.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of School Planning.

North Carolina local public school boards have the statutory responsibility for operating public schools and for entering into contracts for design and construction of their schools. This document presents examples of plans for school buildings planned or constructed during the last few years, as of 1981, representing a wide range of educational…

Shock formation and the ideal shape of ramp compression waves

NASA Astrophysics Data System (ADS)

Swift, Damian C.; Kraus, Richard G.; Loomis, Eric N.; Hicks, Damien G.; McNaney, James M.; Johnson, Randall P.

2008-12-01

We derive expressions for shock formation based on the local curvature of the flow characteristics during dynamic compression. Given a specific ramp adiabat, calculated for instance from the equation of state for a substance, the ideal nonlinear shape for an applied ramp loading history can be determined. We discuss the region affected by lateral release, which can be presented in compact form for the ideal loading history. Example calculations are given for representative metals and plastic ablators. Continuum dynamics (hydrocode) simulations were in good agreement with the algebraic forms. Example applications are presented for several classes of laser-loading experiment, identifying conditions where shocks are desired but not formed, and where long-duration ramps are desired.

Odontocete Studies on the Pacific Missile Range Facility in July/August 2013: Satellite-Tagging, Photo-Identification, and Passive Acoustic Monitoring

DTIC Science & Technology

2014-05-02

descriptive categories: ə.5 kHz click, 1.5–18 kHz clicks (representative of sperm whales [Physeter macrocephalus]), 12–48 kHz click (representative...beaked whale, sperm whale, small odontocete). In the absence of automatically generated positions, a MMAMMAL tool for manually calculating...was located, there could be days where, as an example, sperm whales were present on BSURE but were not noted. Recordings on the M3R system to improve

Decoding spike timing: the differential reverse correlation method

PubMed Central

Tkačik, Gašper; Magnasco, Marcelo O.

2009-01-01

It is widely acknowledged that detailed timing of action potentials is used to encode information, for example in auditory pathways; however the computational tools required to analyze encoding through timing are still in their infancy. We present a simple example of encoding, based on a recent model of time-frequency analysis, in which units fire action potentials when a certain condition is met, but the timing of the action potential depends also on other features of the stimulus. We show that, as a result, spike-triggered averages are smoothed so much they do not represent the true features of the encoding. Inspired by this example, we present a simple method, differential reverse correlations, that can separate an analysis of what causes a neuron to spike, and what controls its timing. We analyze with this method the leaky integrate-and-fire neuron and show the method accurately reconstructs the model's kernel. PMID:18597928

An example of requirements for Advanced Subsonic Civil Transport (ASCT) flight control system using structured techniques

NASA Technical Reports Server (NTRS)

Mclees, Robert E.; Cohen, Gerald C.

1991-01-01

The requirements are presented for an Advanced Subsonic Civil Transport (ASCT) flight control system generated using structured techniques. The requirements definition starts from initially performing a mission analysis to identify the high level control system requirements and functions necessary to satisfy the mission flight. The result of the study is an example set of control system requirements partially represented using a derivative of Yourdon's structured techniques. Also provided is a research focus for studying structured design methodologies and in particular design-for-validation philosophies.

2D Unstructured Grid Based Constrained Inversion of Magnetic Data Using Fuzzy C Means Clustering and Lithology Classification

NASA Astrophysics Data System (ADS)

Kumar, V.; Singh, A.; Sharma, S. P.

2016-12-01

Regular grid discretization is often utilized to define complex geological models. However, this subdivision strategy performs at lower precision to represent the topographical observation surface. We have developed a new 2D unstructured grid based inversion for magnetic data for models including topography. It will consolidate prior parametric information into a deterministic inversion system to enhance the boundary between the different lithology based on recovered magnetic susceptibility distribution from the inversion. The presented susceptibility model will satisfy both the observed magnetic data and parametric information and therefore can represent the earth better than geophysical inversion models that only honor the observed magnetic data. Geophysical inversion and lithology classification are generally treated as two autonomous methodologies and connected in a serial way. The presented inversion strategy integrates these two parts into a unified scheme. To reduce the storage space and computation time, the conjugate gradient method is used. It results in feasible and practical imaging inversion of magnetic data to deal with large number of triangular grids. The efficacy of the presented inversion is demonstrated using two synthetic examples and one field data example.

A Conformance Test Suite for Arden Syntax Compilers and Interpreters.

PubMed

Wolf, Klaus-Hendrik; Klimek, Mike

2016-01-01

The Arden Syntax for Medical Logic Modules is a standardized and well-established programming language to represent medical knowledge. To test the compliance level of existing compilers and interpreters no public test suite exists. This paper presents the research to transform the specification into a set of unit tests, represented in JUnit. It further reports on the utilization of the test suite testing four different Arden Syntax processors. The presented and compared results reveal the status conformance of the tested processors. How test driven development of Arden Syntax processors can help increasing the compliance with the standard is described with two examples. In the end some considerations how an open source test suite can improve the development and distribution of the Arden Syntax are presented.

The Public's Fascination with Prodigious Youth

ERIC Educational Resources Information Center

Jolly, Jennifer L.; Bruno, Justin

2010-01-01

The past several centuries have presented well-documented cases of prodigious youth. Many represented extreme examples of children who had burned brightly and then faded into obscurity, succumbed to a mental illness or an early death, or entered into a career deemed below their mental capacity. These very public displays of mental prowess caused…

Moving Towards Air Quality Models with Chemistry Linked to the Master Chemical Mechanism: CRI Performance in U.S. Regional Models

EPA Science Inventory

This presentation described implementation of the Common Representative Intermediate (CRI) atmospheric chemistry in CMAQ, a short analysis of its performance in CMAQ relative to other mechanisms and an example of the additional detail it gives us for understanding atmospheric che...

Enacting Culturally Relevant Pedagogy: Asset Mapping in Urban Classrooms

ERIC Educational Resources Information Center

Borrero, Noah; Sanchez, Gabriel

2017-01-01

In an attempt to confront monolithic perceptions of achievement and an educational narrative that defines communities of Color by their supposed deficits, the current study presents asset mapping as an example of culturally relevant pedagogy in action. Asset mapping is a pedagogical tool for students to visually represent personalized stories of…

Automatic Dance Lesson Generation

ERIC Educational Resources Information Center

Yang, Yang; Leung, H.; Yue, Lihua; Deng, LiQun

2012-01-01

In this paper, an automatic lesson generation system is presented which is suitable in a learning-by-mimicking scenario where the learning objects can be represented as multiattribute time series data. The dance is used as an example in this paper to illustrate the idea. Given a dance motion sequence as the input, the proposed lesson generation…

Research-Based Unit and Lesson Planning: Maximizing Student Achievement

ERIC Educational Resources Information Center

Pagliaro, Marie

2012-01-01

By integrating the best of current research and practice in curriculum planning this book presents that comprehensive topic in a manageable form. Examples throughout are representative of different grade levels and subjects areas. It should be understood at the outset that the content offered for curriculum planning is not a rigid prescriptive…

Language and Communication-Related Problems of Aviation Safety.

ERIC Educational Resources Information Center

Cushing, Steven

A study of the problems posed by the use of natural language in various aspects of aviation is presented. The study, part of a larger investigation of the feasibility of voice input/output interfaces for communication in aviation, looks at representative real examples of accidents and near misses resulting from language confusions and omissions.…

Bitter Sweets: Mapping Pineapples, Hospitality, and Slavery

ERIC Educational Resources Information Center

Dawson, Julia; Mitchell, Jerry T.

2017-01-01

The objects that represent our material culture--street signs, mascots, symbols etched into stone or printed on stationery--are silent bearers of history: the past tattooed on the present. The meanings given to those objects may change from one social or culture group to another. One seemingly innocent and overlooked example in this vein is the…

Generating and Analyzing Visual Representations of Conic Sections with the Use of Technological Tools

ERIC Educational Resources Information Center

Santos-Trigo, Manuel; Espinosa-Perez, Hugo; Reyes-Rodriguez, Aaron

2006-01-01

Technological tools have the potential to offer students the possibility to represent information and relationships embedded in problems and concepts in ways that involve numerical, algebraic, geometric, and visual approaches. In this paper, the authors present and discuss an example in which an initial representation of a mathematical object…

Research and Action: The Role of an Educational Center.

ERIC Educational Resources Information Center

Flugman, Bert

1986-01-01

Discusses the Center for Advanced Study in Education (CASE) in Manhattan as a representative research and development center in a collaborative role with the New York City Schools. Presents its role as educational problem solver for immediate solutions rather than for interesting findings. Provides examples of three on-going problem solving…

Writing for Primary Science

ERIC Educational Resources Information Center

Mawby, Tara, Ed.

2011-01-01

In this article, two short pieces are presented to show educators just what a good article and a good review could have in them. This article has been written for the purpose of illustrating a good example, but is also representative of the type of content the editors encourage in "Primary Science": practical and active, with images. They also…

Using Complementary Acoustic and Optical Techniques for Quantitative Monitoring of Biomolecular Adsorption at Interfaces

PubMed Central

Konradi, Rupert; Textor, Marcus; Reimhult, Erik

2012-01-01

The great wealth of different surface sensitive techniques used in biosensing, most of which claim to measure adsorbed mass, can at first glance look unnecessary. However, with each technique relying on a different transducer principle there is something to be gained from a comparison. In this tutorial review, different optical and acoustic evanescent techniques are used to illustrate how an understanding of the transducer principle of each technique can be exploited for further interpretation of hydrated and extended polymer and biological films. Some of the most commonly used surface sensitive biosensor techniques (quartz crystal microbalance, optical waveguide spectroscopy and surface plasmon resonance) are briefly described and five case studies are presented to illustrate how different biosensing techniques can and often should be combined. The case studies deal with representative examples of adsorption of protein films, polymer brushes and lipid membranes, and describe e.g., how to deal with strongly vs. weakly hydrated films, large conformational changes and ordered layers of biomolecules. The presented systems and methods are compared to other representative examples from the increasing literature on the subject. PMID:25586027

Active Learning Strategies for Phenotypic Profiling of High-Content Screens.

PubMed

Smith, Kevin; Horvath, Peter

2014-06-01

High-content screening is a powerful method to discover new drugs and carry out basic biological research. Increasingly, high-content screens have come to rely on supervised machine learning (SML) to perform automatic phenotypic classification as an essential step of the analysis. However, this comes at a cost, namely, the labeled examples required to train the predictive model. Classification performance increases with the number of labeled examples, and because labeling examples demands time from an expert, the training process represents a significant time investment. Active learning strategies attempt to overcome this bottleneck by presenting the most relevant examples to the annotator, thereby achieving high accuracy while minimizing the cost of obtaining labeled data. In this article, we investigate the impact of active learning on single-cell-based phenotype recognition, using data from three large-scale RNA interference high-content screens representing diverse phenotypic profiling problems. We consider several combinations of active learning strategies and popular SML methods. Our results show that active learning significantly reduces the time cost and can be used to reveal the same phenotypic targets identified using SML. We also identify combinations of active learning strategies and SML methods which perform better than others on the phenotypic profiling problems we studied. © 2014 Society for Laboratory Automation and Screening.

Modelling uncertainty in incompressible flow simulation using Galerkin based generalized ANOVA

NASA Astrophysics Data System (ADS)

Chakraborty, Souvik; Chowdhury, Rajib

2016-11-01

This paper presents a new algorithm, referred to here as Galerkin based generalized analysis of variance decomposition (GG-ANOVA) for modelling input uncertainties and its propagation in incompressible fluid flow. The proposed approach utilizes ANOVA to represent the unknown stochastic response. Further, the unknown component functions of ANOVA are represented using the generalized polynomial chaos expansion (PCE). The resulting functional form obtained by coupling the ANOVA and PCE is substituted into the stochastic Navier-Stokes equation (NSE) and Galerkin projection is employed to decompose it into a set of coupled deterministic 'Navier-Stokes alike' equations. Temporal discretization of the set of coupled deterministic equations is performed by employing Adams-Bashforth scheme for convective term and Crank-Nicolson scheme for diffusion term. Spatial discretization is performed by employing finite difference scheme. Implementation of the proposed approach has been illustrated by two examples. In the first example, a stochastic ordinary differential equation has been considered. This example illustrates the performance of proposed approach with change in nature of random variable. Furthermore, convergence characteristics of GG-ANOVA has also been demonstrated. The second example investigates flow through a micro channel. Two case studies, namely the stochastic Kelvin-Helmholtz instability and stochastic vortex dipole, have been investigated. For all the problems results obtained using GG-ANOVA are in excellent agreement with benchmark solutions.

[Anatomia sacra. Religiously motivated interventions on human or animal bodies].

PubMed

Gladigow, B

1995-01-01

Controlled surgery in the interior of human or animal bodies in classical antiquity was allowed only under certain circumstances. Bloody animal sacrifice and its rules for the interpretation of entrails as well as the rare examples of 'ritual anatomy' presented a religious framework for the opening of bodies. Greek mythology provided several examples of medical operations, for example, the Caesarean section, transplantations and plastic surgery. Great cultic significance was given to organ votives or reproductions of human inner organs which were offered in temples ex voto or with request for their curing. The anatomical knowledge transported along with these offerings represents a separate tradition different from the state of anatomical knowledge found in medical literature of the period.

Measures of gender role attitudes under revision: The example of the German General Social Survey.

PubMed

Walter, Jessica Gabriele

2018-05-01

Using the example of the German General Social Survey, this study describes how measures of gender role attitudes can be revised. To date measures have focused on the traditional male breadwinner model. However, social developments in female labor force participation, education, and family structure suggest that a revision and adjustment of existing measures are required. First, these measures need to be supplemented with items that represent more egalitarian models of division of labor and the role of the father in the family. Second, the phrasing of existing items needs to be revised. The results of this study indicate that especially regarding the amount of working hours and the age of children, a specification is needed. This study presents a revised measure, to facilitate analyses over time. This revised measure represents two factors: one referring to traditional and one to modern gender role attitudes. Copyright © 2018 Elsevier Inc. All rights reserved.

Brain delivery research in public-private partnerships: The IMI-JU COMPACT consortium as an example.

PubMed

Meyer, Axel H; Untucht, Christopher; Terstappen, Georg C

2017-07-01

The Blood-Brain Barrier (BBB) represents a major hurdle in the development of treatments for CNS disorders due to the fact that it very effectively keeps drugs, especially biological macromolecules, out of the brain. Concomitantly with the increasing importance of biologics research on the BBB and, more specifically, on brain delivery technologies has intensified in recent years. Public-Private Partnerships (PPPs) represent an innovative opportunity to address such complex challenges as they bring together the best expertise from both industry and academia. Here we present the IMI-JU COMPACT (Collaboration on the Optimisation of Macromolecular Pharmaceutical Access to Cellular Targets) consortium working on nanocarriers for targeted delivery of macromolecules as an example. The scope of the consortium, its goals and the expertise within the consortium are outlined. This article is part of the Special Issue entitled "Beyond small molecules for neurological disorders". Copyright © 2016 Elsevier Ltd. All rights reserved.

Confidence regions of planar cardiac vectors

NASA Technical Reports Server (NTRS)

Dubin, S.; Herr, A.; Hunt, P.

1980-01-01

A method for plotting the confidence regions of vectorial data obtained in electrocardiology is presented. The 90%, 95% and 99% confidence regions of cardiac vectors represented in a plane are obtained in the form of an ellipse centered at coordinates corresponding to the means of a sample selected at random from a bivariate normal distribution. An example of such a plot for the frontal plane QRS mean electrical axis for 80 horses is also presented.

Fast simulation techniques for switching converters

NASA Technical Reports Server (NTRS)

King, Roger J.

1987-01-01

Techniques for simulating a switching converter are examined. The state equations for the equivalent circuits, which represent the switching converter, are presented and explained. The uses of the Newton-Raphson iteration, low ripple approximation, half-cycle symmetry, and discrete time equations to compute the interval durations are described. An example is presented in which these methods are illustrated by applying them to a parallel-loaded resonant inverter with three equivalent circuits for its continuous mode of operation.

Exact analytic flux distributions for two-dimensional solar concentrators.

PubMed

Fraidenraich, Naum; Henrique de Oliveira Pedrosa Filho, Manoel; Vilela, Olga C; Gordon, Jeffrey M

2013-07-01

A new approach for representing and evaluating the flux density distribution on the absorbers of two-dimensional imaging solar concentrators is presented. The formalism accommodates any realistic solar radiance and concentrator optical error distribution. The solutions obviate the need for raytracing, and are physically transparent. Examples illustrating the method's versatility are presented for parabolic trough mirrors with both planar and tubular absorbers, Fresnel reflectors with tubular absorbers, and V-trough mirrors with planar absorbers.

A framework for extracting and representing project knowledge contexts using topic models and dynamic knowledge maps

NASA Astrophysics Data System (ADS)

Xu, Jin; Li, Zheng; Li, Shuliang; Zhang, Yanyan

2015-07-01

There is still a lack of effective paradigms and tools for analysing and discovering the contents and relationships of project knowledge contexts in the field of project management. In this paper, a new framework for extracting and representing project knowledge contexts using topic models and dynamic knowledge maps under big data environments is proposed and developed. The conceptual paradigm, theoretical underpinning, extended topic model, and illustration examples of the ontology model for project knowledge maps are presented, with further research work envisaged.

A hypnotically mediated guided imagery intervention for intrusive imagery: creating ground for figure.

PubMed

Appel, P R

1999-04-01

Intrusive imagery can be seen as a cognitive dysfunction in the assimilation and accommodation of the psychological material represented by those images. From a gestalt psychological perspective, the intrusive image represents a figure without a ground that can provide meaning and context. Hypnotically mediated guided imagery interventions can be used to create a ground for the rogue image that metaphorically is an unassimilated figure; and thus allow for the creation of a new cognitive scheme. Four case examples are presented as well as a model for the intervention.

Applications of Nuclear and Particle Physics Technology: Particles & Detection — A Brief Overview

NASA Astrophysics Data System (ADS)

Weisenberger, Andrew G.

A brief overview of the technology applications with significant societal benefit that have their origins in nuclear and particle physics research is presented. It is shown through representative examples that applications of nuclear physics can be classified into two basic areas: 1) applying the results of experimental nuclear physics and 2) applying the tools of experimental nuclear physics. Examples of the application of the tools of experimental nuclear and particle physics research are provided in the fields of accelerator and detector based technologies namely synchrotron light sources, nuclear medicine, ion implantation and radiation therapy.

Library List: A Suggested Library Collection for Undergraduate Linguistics Programs. Linguistics in the Undergraduate Curriculum, Appendix 6.

ERIC Educational Resources Information Center

Linguistic Society of America, Washington, DC.

A list of linguistics-related holdings in the Middlebury College (Vermont) library is presented as an example of a well-developed library collection for an undergraduate linguistics program. The materials are listed under 10 headings corresponding to the best-represented subareas in the collection: linguistics, semantics, grammar (comparative and…

A Child Constructs an Understanding of a Water Wheel in Five Media.

ERIC Educational Resources Information Center

Forman, George

1996-01-01

Presents case study of a child trying to represent and understand the water wheel as an example of knowledge construction from the constructivism perspective. Focuses on how his understanding of physical perspective taking advances through conflicts in the use of different media (telling, drawing, paper, clay, or wood model) and how the Reggio…

"Slow the spread" a national program to contain the gypsy moth

Treesearch

Alexei A. Sharov; Donna Leonard; Andrew M. Liebhold; E. Anderson Roberts; Willard Dickerson; Willard Dickerson

2002-01-01

Invasions by alien species can cause substantial damage to our forest resources. The gypsy moth (Lymantria dispar) represents one example of this problem, and we present here a new strategy for its management that concentrates on containment rather than suppression of outbreaks. The "Slow the Spread" project is a combined federal and state...

What We Learned from a Tomato: Partnering with a Content Expert Plants New Ideas for Instruction

ERIC Educational Resources Information Center

Ermeling, Bradley A.

2014-01-01

The interactions described in this article represent an example of teachers expanding horizons of instructional plans as a direct result of outside expert contributions. After alerting teachers to oversimplified claims about the benefits of lycopene, the research fellow presented the team with a wider range of instructional options to consider…

Annual Percentage Rate and Annual Effective Rate: Resolving Confusion in Intermediate Accounting Textbooks

ERIC Educational Resources Information Center

Vicknair, David; Wright, Jeffrey

2015-01-01

Evidence of confusion in intermediate accounting textbooks regarding the annual percentage rate (APR) and annual effective rate (AER) is presented. The APR and AER are briefly discussed in the context of a note payable and correct formulas for computing each is provided. Representative examples of the types of confusion that we found is presented…

Colorado Front Range fuel photo series

Treesearch

Michael A. Battaglia; Jonathan M. Dodson; Wayne D. Shepperd; Mark J. Platten; Owen M. Tallmadge

2005-01-01

This photo series was developed to help fire managers estimate ground and surface fuel loads that exist in cover types of the Southern Colorado Front Range wildland-urban interface. Photos and associated data representing low, medium, and high fuel loadings from this study are presented by forest type, along with examples of typical or median fuel loadings that were...

Distinctive Curriculum Materials in K-6 Social Studies. Elementary Subjects Center Series No. 35.

ERIC Educational Resources Information Center

Brophy, Jere

In a previous report, the author critiqued the 1988 Silver Burdette & Ginn elementary social studies series (Silver Burdett & Ginn Social Studies), treating it as a representative example of what has been called the de facto national curriculum in elementary social studies. The present report begins with brief critiques of three other market-share…

Dance History Matters in British Higher Education

ERIC Educational Resources Information Center

Carter, Alexandra

2007-01-01

In response to concerns about the place and nature of dance history in British higher education curricula, a database was compiled of representative but significant examples of modules which focused directly on the teaching and learning of history, or had history as a key component. An analysis is presented of these modules in terms of the place…

Using Markov Models of Fault Growth Physics and Environmental Stresses to Optimize Control Actions

NASA Technical Reports Server (NTRS)

Bole, Brian; Goebel, Kai; Vachtsevanos, George

2012-01-01

A generalized Markov chain representation of fault dynamics is presented for the case that available modeling of fault growth physics and future environmental stresses can be represented by two independent stochastic process models. A contrived but representatively challenging example will be presented and analyzed, in which uncertainty in the modeling of fault growth physics is represented by a uniformly distributed dice throwing process, and a discrete random walk is used to represent uncertain modeling of future exogenous loading demands to be placed on the system. A finite horizon dynamic programming algorithm is used to solve for an optimal control policy over a finite time window for the case that stochastic models representing physics of failure and future environmental stresses are known, and the states of both stochastic processes are observable by implemented control routines. The fundamental limitations of optimization performed in the presence of uncertain modeling information are examined by comparing the outcomes obtained from simulations of an optimizing control policy with the outcomes that would be achievable if all modeling uncertainties were removed from the system.

Natural Products from Marine Fungi—Still an Underrepresented Resource

PubMed Central

Imhoff, Johannes F.

2016-01-01

Marine fungi represent a huge potential for new natural products and an increased number of new metabolites have become known over the past years, while much of the hidden potential still needs to be uncovered. Representative examples of biodiversity studies of marine fungi and of natural products from a diverse selection of marine fungi from the author’s lab are highlighting important aspects of this research. If one considers the huge phylogenetic diversity of marine fungi and their almost ubiquitous distribution, and realizes that most of the published work on secondary metabolites of marine fungi has focused on just a few genera, strictly speaking Penicillium, Aspergillus and maybe also Fusarium and Cladosporium, the diversity of marine fungi is not adequately represented in investigations on their secondary metabolites and the less studied species deserve special attention. In addition to results on recently discovered new secondary metabolites of Penicillium species, the diversity of fungi in selected marine habitats is highlighted and examples of groups of secondary metabolites produced by representatives of a variety of different genera and their bioactivities are presented. Special focus is given to the production of groups of derivatives of metabolites by the fungi and to significant differences in biological activities due to small structural changes. PMID:26784209

3-D minimum-structure inversion of magnetotelluric data using the finite-element method and tetrahedral grids

NASA Astrophysics Data System (ADS)

Jahandari, H.; Farquharson, C. G.

2017-11-01

Unstructured grids enable representing arbitrary structures more accurately and with fewer cells compared to regular structured grids. These grids also allow more efficient refinements compared to rectilinear meshes. In this study, tetrahedral grids are used for the inversion of magnetotelluric (MT) data, which allows for the direct inclusion of topography in the model, for constraining an inversion using a wireframe-based geological model and for local refinement at the observation stations. A minimum-structure method with an iterative model-space Gauss-Newton algorithm for optimization is used. An iterative solver is employed for solving the normal system of equations at each Gauss-Newton step and the sensitivity matrix-vector products that are required by this solver are calculated using pseudo-forward problems. This method alleviates the need to explicitly form the Hessian or Jacobian matrices which significantly reduces the required computation memory. Forward problems are formulated using an edge-based finite-element approach and a sparse direct solver is used for the solutions. This solver allows saving and re-using the factorization of matrices for similar pseudo-forward problems within a Gauss-Newton iteration which greatly minimizes the computation time. Two examples are presented to show the capability of the algorithm: the first example uses a benchmark model while the second example represents a realistic geological setting with topography and a sulphide deposit. The data that are inverted are the full-tensor impedance and the magnetic transfer function vector. The inversions sufficiently recovered the models and reproduced the data, which shows the effectiveness of unstructured grids for complex and realistic MT inversion scenarios. The first example is also used to demonstrate the computational efficiency of the presented model-space method by comparison with its data-space counterpart.

Cubic Zig-Zag Enrichment of the Classical Kirchhoff Kinematics for Laminated and Sandwich Plates

NASA Technical Reports Server (NTRS)

Nemeth, Michael P.

2012-01-01

A detailed anaylsis and examples are presented that show how to enrich the kinematics of classical Kirchhoff plate theory by appending them with a set of continuous piecewise-cubic functions. This analysis is used to obtain functions that contain the effects of laminate heterogeneity and asymmetry on the variations of the inplane displacements and transverse shearing stresses, for use with a {3, 0} plate theory in which these distributions are specified apriori. The functions used for the enrichment are based on the improved zig-zag plate theory presented recently by Tessler, Di Scuva, and Gherlone. With the approach presented herein, the inplane displacements are represented by a set of continuous piecewise-cubic functions, and the transverse shearing stresses and strains are represented by a set of piecewise-quadratic functions that are discontinuous at the ply interfaces.

Evaluating wildland fire danger and prioritizing vegetation and fuels treatments

Treesearch

Paul F. Hessburg; Keith M. Reynolds; Robert E. Keane; Kevin M. James; R. Brion Salter

2010-01-01

We present a prototype decision support system for evaluating wild-land fire danger and prioritizing subwatersheds for vegetation and fuels treatment. We demonstrate the use of the system with an example from the Rocky Mountain region in the State of Utah, which represents a planning area of about 4.8 million ha and encompasses 575 complete subwatersheds. In a logic...

The Affordances of Blogs and Digital Video: New Potentials for Exploring Topics and Representing Meaning

ERIC Educational Resources Information Center

Ranker, Jason

2015-01-01

In this article, the author presents examples of two ninth-grade students' literacy processes as they used blogs and digital video (amongst other media) to inquire into the subject matter of fast food. The author discusses the students' uses of these focal media through the concept of affordances, a concept that refers to the distinct…

Proceedings of the National Conference on Undergraduate Research (11th, Austin, Texas, April 24-26, 1997). Volumes I-V.

ERIC Educational Resources Information Center

Yearout, Robert D., Ed.

This set of proceedings documents includes 407 papers representative of the 1,825 papers and posters presented at a conference on undergraduate research. Volume I contains papers on the arts and humanities. Examples of topics include collaborative art, music composition using computer technology, interpreting Roman morality, gay marriage, and…

Context in Models of Human-Machine Systems

NASA Technical Reports Server (NTRS)

Callantine, Todd J.; Null, Cynthia H. (Technical Monitor)

1998-01-01

All human-machine systems models represent context. This paper proposes a theory of context through which models may be usefully related and integrated for design. The paper presents examples of context representation in various models, describes an application to developing models for the Crew Activity Tracking System (CATS), and advances context as a foundation for integrated design of complex dynamic systems.

Chemical control of brush in ponderosa pine forests of central Oregon.

Treesearch

Walter G. Dahms

1961-01-01

The many acres of forest land that are occupied by brush in central Oregon represent a large-scale waste of timber-growing capacity and a major economic loss to the area. Although large brushfields devoid of tree growth present the most spectacular examples of loss, less obvious but equally important brush problems are common in established timber stands. Brush...

Warped conformal field theory as lower spin gravity

NASA Astrophysics Data System (ADS)

Hofman, Diego M.; Rollier, Blaise

2015-08-01

Two dimensional Warped Conformal Field Theories (WCFTs) may represent the simplest examples of field theories without Lorentz invariance that can be described holographically. As such they constitute a natural window into holography in non-AdS space-times, including the near horizon geometry of generic extremal black holes. It is shown in this paper that WCFTs posses a type of boost symmetry. Using this insight, we discuss how to couple these theories to background geometry. This geometry is not Riemannian. We call it Warped Geometry and it turns out to be a variant of a Newton-Cartan structure with additional scaling symmetries. With this formalism the equivalent of Weyl invariance in these theories is presented and we write two explicit examples of WCFTs. These are free fermionic theories. Lastly we present a systematic description of the holographic duals of WCFTs. It is argued that the minimal setup is not Einstein gravity but an SL (2, R) × U (1) Chern-Simons Theory, which we call Lower Spin Gravity. This point of view makes manifest the definition of boundary for these non-AdS geometries. This case represents the first step towards understanding a fully invariant formalism for WN field theories and their holographic duals.

Exploiting Recurring Structure in a Semantic Network

NASA Technical Reports Server (NTRS)

Wolfe, Shawn R.; Keller, Richard M.

2004-01-01

With the growing popularity of the Semantic Web, an increasing amount of information is becoming available in machine interpretable, semantically structured networks. Within these semantic networks are recurring structures that could be mined by existing or novel knowledge discovery methods. The mining of these semantic structures represents an interesting area that focuses on mining both for and from the Semantic Web, with surprising applicability to problems confronting the developers of Semantic Web applications. In this paper, we present representative examples of recurring structures and show how these structures could be used to increase the utility of a semantic repository deployed at NASA.

Human-computer interface

DOEpatents

Anderson, Thomas G.

2004-12-21

The present invention provides a method of human-computer interfacing. Force feedback allows intuitive navigation and control near a boundary between regions in a computer-represented space. For example, the method allows a user to interact with a virtual craft, then push through the windshield of the craft to interact with the virtual world surrounding the craft. As another example, the method allows a user to feel transitions between different control domains of a computer representation of a space. The method can provide for force feedback that increases as a user's locus of interaction moves near a boundary, then perceptibly changes (e.g., abruptly drops or changes direction) when the boundary is traversed.

High Resolution, High-Speed Photography, an Increasingly Prominent Diagnostic in Ballistic Research Experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shaw, L.; Muelder, S.

1999-10-22

High resolution, high-speed photography is becoming a prominent diagnostic in ballistic experimentation. The development of high speed cameras utilizing electro-optics and the use of lasers for illumination now provide the capability to routinely obtain high quality photographic records of ballistic style experiments. The purpose of this presentation is to review in a visual manner the progress of this technology and how it has impacted ballistic experimentation. Within the framework of development at LLNL, we look at the recent history of large format high-speed photography, and present a number of photographic records that represent the state of the art at themore » time they were made. These records are primarily from experiments involving shaped charges. We also present some examples of current photographic technology, developed within the ballistic community, that has application to hydro diagnostic experimentation at large. This paper is designed primarily as an oral-visual presentation. This written portion is to provide general background, a few examples, and a bibliography.« less

Query by example video based on fuzzy c-means initialized by fixed clustering center

NASA Astrophysics Data System (ADS)

Hou, Sujuan; Zhou, Shangbo; Siddique, Muhammad Abubakar

2012-04-01

Currently, the high complexity of video contents has posed the following major challenges for fast retrieval: (1) efficient similarity measurements, and (2) efficient indexing on the compact representations. A video-retrieval strategy based on fuzzy c-means (FCM) is presented for querying by example. Initially, the query video is segmented and represented by a set of shots, each shot can be represented by a key frame, and then we used video processing techniques to find visual cues to represent the key frame. Next, because the FCM algorithm is sensitive to the initializations, here we initialized the cluster center by the shots of query video so that users could achieve appropriate convergence. After an FCM cluster was initialized by the query video, each shot of query video was considered a benchmark point in the aforesaid cluster, and each shot in the database possessed a class label. The similarity between the shots in the database with the same class label and benchmark point can be transformed into the distance between them. Finally, the similarity between the query video and the video in database was transformed into the number of similar shots. Our experimental results demonstrated the performance of this proposed approach.

Shear-induced rigidity in athermal materials

NASA Astrophysics Data System (ADS)

Chakraborty, Bulbul; Sarkar, Sumantra

2014-03-01

In this talk, we present a minimal model of rigidity and plastic failure in solids whose rigidity emerges directly as a result of applied stresses. Examples include shear-jamming (SJ) in dry grains and discontinuous shear thickening (DST) of dense non-Brownian suspensions. Both SJ and DST states are examples of non-equilibrium, self-assembled structures that have evolved to support the load that created them. These are strongly-interacting systems where the interactions arise primarily from the strict constraints of force and torque balance at the local and global scales. Our model is based on a reciprocal-space picture that strictly enforces the local and global constraints, and is, therefore, best suited to capturing the strong correlations in these non-equilibrium systems. The reciprocal space is a tiling whose edges represent contact forces, and whose faces represent grains. A separation of scale between force fluctuations and displacements of grains is used to represent the positional disorder as quenched randomness on variables in the reciprocal space. Comparing theoretical results to experiments, we will argue that the packing fraction controls the strength of the quenched disorder. Sumantra Sarkar et al, Phys. Rev. Lett. 111, 068301 (2013)

Representing motion in a static image: constraints and parallels in art, science, and popular culture.

PubMed

Cutting, James E

2002-01-01

Representing motion in a picture is a challenge to artists, scientists, and all other imagemakers. Moreover, it presents a problem that will not go away with electronic and digital media, because often the pedagogical purpose of the representation of motion is more important than the motion itself. All satisfactory solutions evoke motion-for example, dynamic balance (or broken symmetry), stroboscopic sequences, affine shear (or forward lean), and photographic blur-but they also typically sacrifice the accuracy of the motion represented, a solution often unsuitable for science. Vector representations superimposed on static images allow for accuracy, but are not applicable to all situations. Workable solutions are almost certainly case specific and subject to continual evolution through exploration by imagemakers.

Non-verbal numerical cognition: from reals to integers.

PubMed

Gallistel; Gelman

2000-02-01

Data on numerical processing by verbal (human) and non-verbal (animal and human) subjects are integrated by the hypothesis that a non-verbal counting process represents discrete (countable) quantities by means of magnitudes with scalar variability. These appear to be identical to the magnitudes that represent continuous (uncountable) quantities such as duration. The magnitudes representing countable quantity are generated by a discrete incrementing process, which defines next magnitudes and yields a discrete ordering. In the case of continuous quantities, the continuous accumulation process does not define next magnitudes, so the ordering is also continuous ('dense'). The magnitudes representing both countable and uncountable quantity are arithmetically combined in, for example, the computation of the income to be expected from a foraging patch. Thus, on the hypothesis presented here, the primitive machinery for arithmetic processing works with real numbers (magnitudes).

Causal tapestries for psychology and physics.

PubMed

Sulis, William H

2012-04-01

Archetypal dynamics is a formal approach to the modeling of information flow in complex systems used to study emergence. It is grounded in the Fundamental Triad of realisation (system), interpretation (archetype) and representation (formal model). Tapestries play a fundamental role in the framework of archetypal dynamics as a formal representational system. They represent information flow by means of multi layered, recursive, interlinked graphical structures that express both geometry (form or sign) and logic (semantics). This paper presents a detailed mathematical description of a specific tapestry model, the causal tapestry, selected for use in describing behaving systems such as appear in psychology and physics from the standpoint of Process Theory. Causal tapestries express an explicit Lorentz invariant transient now generated by means of a reality game. Observables are represented by tapestry informons while subjective or hidden components (for example intellectual and emotional processes) are incorporated into the reality game that determines the tapestry dynamics. As a specific example, we formulate a random graphical dynamical system using causal tapestries.

Human Cells as Platform to Produce Gamma-Carboxylated Proteins.

PubMed

de Sousa Bomfim, Aline; de Freitas, Marcela Cristina Corrêa; Covas, Dimas Tadeu; de Sousa Russo, Elisa Maria

2018-01-01

The gamma-carboxylated proteins belong to a family of proteins that depend on vitamin K for normal biosynthesis. The major representative gamma-carboxylated proteins are the coagulation system proteins, for example, factor VII, factor IX, factor X, prothrombin, and proteins C, S, and Z. These molecules have harbored posttranslational modifications, such as glycosylation and gamma-carboxylation, and for this reason they need to be produced in mammalian cell lines. Human cells lines have emerged as the most promising alternative to the production of gamma-carboxylated proteins. In this chapter, the methods to generate human cells as a platform to produce gamma-carboxylated proteins, for example the coagulation factors VII and IX, are presented. From the cell line modification up to the vitamin K adaptation of the produced cells is described in the protocols presented in this chapter.

Making It Count: A Report on a Project to Provide Better Financial Aid Information to Students.

ERIC Educational Resources Information Center

College Entrance Examination Board, New York, NY. Coll. Scholarship Service.

The data presented represent the current status of an ongoing project to develop, test, implement, and evaluate a wide range of new and different ways to providing information to students about costs and aid. The data, examples, and recommendations reflect the state of the art in better information for student choice in December 1976. The report…

A Bootstrap Algorithm for Mixture Models and Interval Data in Inter-Comparisons

DTIC Science & Technology

2001-07-01

parametric bootstrap. The present algorithm will be applied to a thermometric inter-comparison, where data cannot be assumed to be normally distributed. 2 Data...experimental methods, used in each laboratory) often imply that the statistical assumptions are not satisfied, as for example in several thermometric ...triangular). Indeed, in thermometric experiments these three probabilistic models can represent several common stochastic variabilities for

On Patterns in Affective Media

NASA Astrophysics Data System (ADS)

ADAMATZKY, ANDREW

In computational experiments with cellular automaton models of affective solutions, where chemical species represent happiness, anger, fear, confusion and sadness, we study phenomena of space time dynamic of emotions. We demonstrate feasibility of the affective solution paradigm in example of emotional abuse therapy. Results outlined in the present paper offer unconventional but promising technique to design, analyze and interpret spatio-temporal dynamic of mass moods in crowds.

Trombiculiasis: not only a matter of animals!

PubMed

Guarneri, Claudio; Chokoeva, Anastasiya Atanasova; Wollina, Uwe; Lotti, Torello; Tchernev, Georgi

2017-03-01

Trombiculiasis represents a striking emerging infestation in humans. In fact, modified lifestyles and easy and quick traveling around the globe, together with the altered ecology and habits of the parasite Neotrombicula autumnalis, make this original epizoonosis an extraordinary example of synanthropic dermatosis. We present an additional clinical image of this unusual parasite transmission from animals to humans occurring in a trekker in Calabria, Italy.

Child-Specific Exposure Scenarios Examples (Final Report) ...

EPA Pesticide Factsheets

EPA announced the availability of the final report, Child-Specific Exposure Scenarios Examples. This report is intended to be a companion document to the Exposure Factors Handbook (U.S. EPA 2011). The example scenarios were compiled from questions and inquiries received from users of the Exposure Factors Handbook (EFH) on how to select data from the EFH to assess childhood exposures. The scenarios presented in this report promote the use of the standard set of age groups recommended by the U.S. EPA in the report entitled Guidance on Selecting Age Groups for Monitoring and Assessing Childhood Exposures to Environmental Contaminants (U.S. EPA 2005). The purpose of the Child-Specific Exposure Scenarios Examples Report is to outline scenarios for various child-specific exposure pathways and to demonstrate how data from the Exposure Factors Handbook (U.S. EPA, 2011) may be applied for estimating exposures. The handbook provides data on drinking water consumption, soil ingestion, mouthing behavior, inhalation rates, dermal factors including skin area and soil adherence factors, consumption of fruits and vegetables, fish, meats, dairy products, homegrown foods, human milk, activity patterns, body weight, and consumer products. The example scenarios presented here have been selected to best demonstrate the use of the various key data sets in the Child-Specific Exposure Factors Handbook (U.S. EPA, 2008a), and represent commonly encountered exposure pathways. An exhausti

A residence-time-based transport approach for the groundwater pathway in performance assessment models

NASA Astrophysics Data System (ADS)

Robinson, Bruce A.; Chu, Shaoping

2013-03-01

This paper presents the theoretical development and numerical implementation of a new modeling approach for representing the groundwater pathway in risk assessment or performance assessment model of a contaminant transport system. The model developed in the present study, called the Residence Time Distribution (RTD) Mixing Model (RTDMM), allows for an arbitrary distribution of fluid travel times to be represented, to capture the effects on the breakthrough curve of flow processes such as channelized flow and fast pathways and complex three-dimensional dispersion. Mathematical methods for constructing the model for a given RTD are derived directly from the theory of residence time distributions in flowing systems. A simple mixing model is presented, along with the basic equations required to enable an arbitrary RTD to be reproduced using the model. The practical advantages of the RTDMM include easy incorporation into a multi-realization probabilistic simulation; computational burden no more onerous than a one-dimensional model with the same number of grid cells; and straightforward implementation into available flow and transport modeling codes, enabling one to then utilize advanced transport features of that code. For example, in this study we incorporated diffusion into the stagnant fluid in the rock matrix away from the flowing fractures, using a generalized dual porosity model formulation. A suite of example calculations presented herein showed the utility of the RTDMM for the case of a radioactive decay chain, dual porosity transport and sorption.

The Inflatable Poster

NASA Astrophysics Data System (ADS)

Tackley, P. J.

2004-12-01

Inflatable devices are frequently used in advertising in order to grab the attention of consumers: one sees, for example, 20 foot tall inflatable drink containers, inflatable cell phones, inflatable bubble gum packets, as well as blimps wafting majestically over major sports events. More usefully, inflatable representations of scientifically-interesting items are widely available, including astronauts, space shuttles, dinosaurs and globes and can help to build and inspire the interest of the general public, and in particular children, in such ideas. How can such concepts be adapted to improve poster presentations? Possibility one is to use relevant existing commercially-available inflatables to dress the poster: skeletons, astronauts, globes and so forth. More exciting is to develop custom inflatables that represent three-dimensional renderings of objects that the poster is describing. Examples of individual objects might be an inflatable slab, inflatable avalanche, inflatable plume, or it's larger cousin, the 10 foot high inflatable superplume or 20 foot high inflatable megaplume. More elaborately, inflatables might represent isosurfaces in three-dimensional spherical convection, although other fabrication methods may be more suitable. More simply, inflatable spheres could be imprinted with the planform of convection, geoid, or other spherical fields of geophysical interest. Finally, it should be possible to put an entire poster on an inflatable object, possibly small ones (balloons) to hand out. A major concern, however, is that the presenter may use such techniques to inflate their scientific findings, or to present overblown ideas.

The Difference a Single Atom Can Make: Synthesis and Design at the Chemistry–Biology Interface

PubMed Central

2017-01-01

A Perspective of work in our laboratory on the examination of biologically active compounds, especially natural products, is presented. In the context of individual programs and along with a summary of our work, selected cases are presented that illustrate the impact single atom changes can have on the biological properties of the compounds. The examples were chosen to highlight single heavy atom changes that improve activity, rather than those that involve informative alterations that reduce or abolish activity. The examples were also chosen to illustrate that the impact of such single-atom changes can originate from steric, electronic, conformational, or H-bonding effects, from changes in functional reactivity, from fundamental intermolecular interactions with a biological target, from introduction of a new or altered functionalization site, or from features as simple as improvements in stability or physical properties. Nearly all the examples highlighted represent not only unusual instances of productive deep-seated natural product modifications and were introduced through total synthesis but are also remarkable in that they are derived from only a single heavy atom change in the structure. PMID:28945374

The use and generation of illustrative examples in computer-based instructional systems

NASA Technical Reports Server (NTRS)

Selig, William John; Johannes, James D.

1987-01-01

A method is proposed whereby the underlying domain knowledge is represented such that illustrative examples may be generated on demand. This method has the advantage that the generated example can follow changes in the domain in addition to allowing automatic customization of the example to the individual.

SAM 2 measurements of the polar stratospheric aerosol. Volume 9: October 1982 - April 1983

NASA Technical Reports Server (NTRS)

Mcmaster, L. R.; Powell, K. A.

1991-01-01

The Stratospheric Aerosol Measurement (SAM) II sensor aboard Nimbus 7 is providing 1.0 micron extinction measurements of Antarctic and Arctic stratospheric aerosols with a vertical resolution of 1 km. Representative examples and weekly averages including corresponding temperature profiles provided by NOAA for the time and place of each SAM II measurement are presented. Contours of aerosol extinction as a function of altitude and longitude or time are plotted, and aerosol optical depths are calculated for each week. Typical values of aerosol extinction and stratospheric optical depth in the Arctic are unusually large due to the presence of material from the El Chichon volcano eruption in the Spring of 1982. For example, the optical depth peaked at 0.068, more than 50 times background values. Typical values of aerosol extinction and stratospheric optical depth in the Antarctic varied considerably during this period due to the transport and arrival of the material from the El Chichon eruption. For example, the stratospheric optical depth varied from 0.002 in October 1982, to 0.021 in January 1983. Polar stratospheric clouds were observed during the Arctic winter, as expected. A representative sample is provided of the ninth 6-month period of data to be used in atmospheric and climatic studies.

Representing and Learning Complex Object Interactions

PubMed Central

Zhou, Yilun; Konidaris, George

2017-01-01

We present a framework for representing scenarios with complex object interactions, in which a robot cannot directly interact with the object it wishes to control, but must instead do so via intermediate objects. For example, a robot learning to drive a car can only indirectly change its pose, by rotating the steering wheel. We formalize such complex interactions as chains of Markov decision processes and show how they can be learned and used for control. We describe two systems in which a robot uses learning from demonstration to achieve indirect control: playing a computer game, and using a hot water dispenser to heat a cup of water. PMID:28593181

An intelligent computer tutor to guide self-explanation while learning from examples

NASA Astrophysics Data System (ADS)

Conati, Cristina

1999-11-01

Many studies in cognitive science show that self-explanation---the process of clarifying and making more complete to oneself the solution of an example---improves learning, and that guiding self-explanation extends these benefits. This thesis presents an intelligent computer tutor that aims to improve learning from examples by supporting self-explanation. The tutor, known as the SE (self-explanation) Coach, is innovative in two ways. First, it represents the first attempt to develop a computer tutor that supports example studying instead of problem solving. Second, it explicitly guides a domain-general, meta-cognitive skill: self-explanation. The SE-Coach is part of the Andes tutoring system for college physics and is meant to be used in conjunction with the problem solving tasks that Andes supports. In order to maximize the system capability to trigger the same beneficial cognitive processes, every element of the SE-Coach embeds existing hypotheses about the features that make self-explanation effective for learning. Designing the SE-Coach involved finding solutions for three main challenges: (1) To design an interface that effectively monitors and supports self-explanation. (2) To devise a student model that allows the assessment of example understanding from reading and self-examination actions. (3) To effectively elicit further self-explanation that improves student's example understanding. In this work we present our solutions to these challenges: (1) An interface including principled, interactive tools to explore examples and build self-explanations under the SECoach's supervision. (2) A probabilistic student model based on a Bayesian network, which integrates a model of correct self-explanation and information on the student's knowledge and studying actions to generate a probabilistic assessment of the student's example understanding. (3) Tutorial interventions that rely on the student model to detect deficits in the student's example understanding and elicit self-explanations that overcome them. In this thesis we also present the results of a formal study with 56 college students to evaluate the effectiveness of the SE-Coach. We discuss some hypotheses to explain the obtained results, based on the analysis of the data collected during the experiment.

Sensitivity Equation Derivation for Transient Heat Transfer Problems

NASA Technical Reports Server (NTRS)

Hou, Gene; Chien, Ta-Cheng; Sheen, Jeenson

2004-01-01

The focus of the paper is on the derivation of sensitivity equations for transient heat transfer problems modeled by different discretization processes. Two examples will be used in this study to facilitate the discussion. The first example is a coupled, transient heat transfer problem that simulates the press molding process in fabrication of composite laminates. These state equations are discretized into standard h-version finite elements and solved by a multiple step, predictor-corrector scheme. The sensitivity analysis results based upon the direct and adjoint variable approaches will be presented. The second example is a nonlinear transient heat transfer problem solved by a p-version time-discontinuous Galerkin's Method. The resulting matrix equation of the state equation is simply in the form of Ax = b, representing a single step, time marching scheme. A direct differentiation approach will be used to compute the thermal sensitivities of a sample 2D problem.

`So, What Do Men and Women Want? Is It any Different from What Animals Want?' Sex Education in an Upper Secondary School

NASA Astrophysics Data System (ADS)

Orlander, Auli Arvola

2016-12-01

The aim of the study is to discuss and problematise notions of femininity and masculinity constructed in teaching situations among 16-year-old upper-secondary students studying science. The empirical examples originate from a teaching session with the theme of `sex and relationships'. The analysis is focused on metaphors inherent in a lesson that has its origins in the animal world. The findings show that the lesson `sex in the animal world' is full of anthropomorphism, metaphors that humanise animal behaviour. Teachers and students compare the animals' sexual behaviour with human behaviour, with the result that the animal world can be perceived as representative of natural sexual behaviour. The survey illustrates problems with how the examples are permeated by cultural values in the presentation of the animal world and how these examples form constructions of femininity and masculinity in the classroom.

Geologic map of the Hasty Quadrangle, Boone and Newton Counties, Arkansas

USGS Publications Warehouse

Hudson, Mark R.; Murray, Kyle E.

2004-01-01

This digital geologic map compilation presents new polygon (for example, geologic map unit contacts), line (for example, fault, fold axis, and structure contour), and point (for example, structural attitude, contact elevations) vector data for the Hasty 7.5-minute quadrangle in northern Arkansas. The map database, which is at 1:24,000-scale resolution, provides geologic coverage of an area of current hydrogeologic, tectonic, and stratigraphic interest. The Hasty quadrangle is located in northern Newton and southern Boone Counties about 20 km south of the town of Harrison. The map area is underlain by sedimentary rocks of Ordovician, Mississippian, and Pennsylvanian age that were mildly deformed by a series of normal and strike-slip faults and folds. The area is representative of the stratigraphic and structural setting of the southern Ozark Dome. The Hasty quadrangle map provides new geologic information for better understanding groundwater flow paths in and adjacent to the Buffalo River watershed.

Modeling and optimum time performance for concurrent processing

NASA Technical Reports Server (NTRS)

Mielke, Roland R.; Stoughton, John W.; Som, Sukhamoy

1988-01-01

The development of a new graph theoretic model for describing the relation between a decomposed algorithm and its execution in a data flow environment is presented. Called ATAMM, the model consists of a set of Petri net marked graphs useful for representing decision-free algorithms having large-grained, computationally complex primitive operations. Performance time measures which determine computing speed and throughput capacity are defined, and the ATAMM model is used to develop lower bounds for these times. A concurrent processing operating strategy for achieving optimum time performance is presented and illustrated by example.

Extension of a System Level Tool for Component Level Analysis

NASA Technical Reports Server (NTRS)

Majumdar, Alok; Schallhorn, Paul

2002-01-01

This paper presents an extension of a numerical algorithm for network flow analysis code to perform multi-dimensional flow calculation. The one dimensional momentum equation in network flow analysis code has been extended to include momentum transport due to shear stress and transverse component of velocity. Both laminar and turbulent flows are considered. Turbulence is represented by Prandtl's mixing length hypothesis. Three classical examples (Poiseuille flow, Couette flow and shear driven flow in a rectangular cavity) are presented as benchmark for the verification of the numerical scheme.

Extension of a System Level Tool for Component Level Analysis

NASA Technical Reports Server (NTRS)

Majumdar, Alok; Schallhorn, Paul; McConnaughey, Paul K. (Technical Monitor)

2001-01-01

This paper presents an extension of a numerical algorithm for network flow analysis code to perform multi-dimensional flow calculation. The one dimensional momentum equation in network flow analysis code has been extended to include momentum transport due to shear stress and transverse component of velocity. Both laminar and turbulent flows are considered. Turbulence is represented by Prandtl's mixing length hypothesis. Three classical examples (Poiseuille flow, Couette flow, and shear driven flow in a rectangular cavity) are presented as benchmark for the verification of the numerical scheme.

Computer code for estimating installed performance of aircraft gas turbine engines. Volume 3: Library of maps

NASA Technical Reports Server (NTRS)

Kowalski, E. J.

1979-01-01

A computerized method which utilizes the engine performance data and estimates the installed performance of aircraft gas turbine engines is presented. This installation includes: engine weight and dimensions, inlet and nozzle internal performance and drag, inlet and nacelle weight, and nacelle drag. The use of two data base files to represent the engine and the inlet/nozzle/aftbody performance characteristics is discussed. The existing library of performance characteristics for inlets and nozzle/aftbodies and an example of the 1000 series of engine data tables is presented.

Control design for future agile fighters

NASA Technical Reports Server (NTRS)

Murphy, Patrick C.; Davidson, John B.

1991-01-01

The CRAFT control design methodology is presented. CRAFT stands for the design objectives addressed, namely, Control power, Robustness, Agility, and Flying Qualities Tradeoffs. The approach combines eigenspace assignment, which allows for direct specification of eigenvalues and eigenvectors, and a graphical approach for representing control design metrics that captures numerous design goals in one composite illustration. The methodology makes use of control design metrics from four design objective areas, namely, control power, robustness, agility, and flying qualities. An example of the CRAFT methodology as well as associated design issues are presented.

A matrix solution for the simulation of magnetic fields with ideal current loops

NASA Technical Reports Server (NTRS)

Stankiewicz, N.

1979-01-01

A matrix formulation is presented for describing axisymmetric magnetic field data with ideal current loops. A computer program written in APL is used to invert the matrix and hence to solve for the coil strengths which are used to represent the field data. Examples are given of the coil representation for (1) measured magnetic data, (2) refocusing fields, and (3) PPM focusing fields.

Japan Studies through the Lenses of Different Disciplines: First Yearbook of the Japan Studies Association. [Papers from the Japan Studies Association Annual Conference (San Diego, California, 1995)].

ERIC Educational Resources Information Center

Speaker, Richard B., Jr., Ed.; Kawada, Louise Myers, Ed.

1997-01-01

This yearbook presents new perspectives and materials on Japan that are engaging, relatively jargon-free, and shaped so that their usefulness in a college classroom is readily apparent. The yearbook represents an example of the potential for genuine scholarship that lies within interdisciplinary studies. Articles are divided among five thematic…

Past evolutionary tradeoffs represent opportunities for crop genetic improvement and increased human lifespan.

PubMed

Denison, R Ford

2011-03-01

The repeated evolution of complex adaptations - crop mimicry by weeds, for example, or CO2-concentrating C4 photosynthesis - shows the power of natural selection to solve difficult problems that limited fitness in past environments. The sophistication of natural selection's innovations contrasts with the relatively simple changes (e.g., increasing the expression of existing genes) readily achievable by today's biotechnology. Mutants with greater expression of these genes arose repeatedly over the course of evolution, so their present rarity indicates rejection by natural selection. Similarly, medical interventions that simply up- or down-regulate existing physiological mechanisms presumably recreate phenotypes also rejected by past natural selection. Some tradeoffs that constrained past natural selection still apply, such as those resulting from conservation of matter. But tradeoffs between present human goals and individual fitness in past environments may represent fairly easy opportunities to achieve our goals by reversing some effects of past selection. This point is illustrated with three examples, based on tradeoffs between (i) individual-plant fitness versus whole-crop performance, (ii) the fitness of symbionts (rhizobia) versus that of their legume hosts, and (iii) human fertility versus longevity in the context of environmental cues, such as consumption of 'famine foods', that predict trends in population size.

QSAR modeling of GPCR ligands: methodologies and examples of applications.

PubMed

Tropsha, A; Wang, S X

2006-01-01

GPCR ligands represent not only one of the major classes of current drugs but the major continuing source of novel potent pharmaceutical agents. Because 3D structures of GPCRs as determined by experimental techniques are still unavailable, ligand-based drug discovery methods remain the major computational molecular modeling approaches to the analysis of growing data sets of tested GPCR ligands. This paper presents an overview of modern Quantitative Structure Activity Relationship (QSAR) modeling. We discuss the critical issue of model validation and the strategy for applying the successfully validated QSAR models to virtual screening of available chemical databases. We present several examples of applications of validated QSAR modeling approaches to GPCR ligands. We conclude with the comments on exciting developments in the QSAR modeling of GPCR ligands that focus on the study of emerging data sets of compounds with dual or even multiple activities against two or more of GPCRs.

The Quantitative Analysis of User Behavior Online - Data, Models and Algorithms

NASA Astrophysics Data System (ADS)

Raghavan, Prabhakar

By blending principles from mechanism design, algorithms, machine learning and massive distributed computing, the search industry has become good at optimizing monetization on sound scientific principles. This represents a successful and growing partnership between computer science and microeconomics. When it comes to understanding how online users respond to the content and experiences presented to them, we have more of a lacuna in the collaboration between computer science and certain social sciences. We will use a concrete technical example from image search results presentation, developing in the process some algorithmic and machine learning problems of interest in their own right. We then use this example to motivate the kinds of studies that need to grow between computer science and the social sciences; a critical element of this is the need to blend large-scale data analysis with smaller-scale eye-tracking and "individualized" lab studies.

Structures of membrane proteins

PubMed Central

Vinothkumar, Kutti R.; Henderson, Richard

2010-01-01

In reviewing the structures of membrane proteins determined up to the end of 2009, we present in words and pictures the most informative examples from each family. We group the structures together according to their function and architecture to provide an overview of the major principles and variations on the most common themes. The first structures, determined 20 years ago, were those of naturally abundant proteins with limited conformational variability, and each membrane protein structure determined was a major landmark. With the advent of complete genome sequences and efficient expression systems, there has been an explosion in the rate of membrane protein structure determination, with many classes represented. New structures are published every month and more than 150 unique membrane protein structures have been determined. This review analyses the reasons for this success, discusses the challenges that still lie ahead, and presents a concise summary of the key achievements with illustrated examples selected from each class. PMID:20667175

A survey of hybrid Unmanned Aerial Vehicles

NASA Astrophysics Data System (ADS)

Saeed, Adnan S.; Younes, Ahmad Bani; Cai, Chenxiao; Cai, Guowei

2018-04-01

This article presents a comprehensive overview on the recent advances of miniature hybrid Unmanned Aerial Vehicles (UAVs). For now, two conventional types, i.e., fixed-wing UAV and Vertical Takeoff and Landing (VTOL) UAV, dominate the miniature UAVs. Each type has its own inherent limitations on flexibility, payload, flight range, cruising speed, takeoff and landing requirements and endurance. Enhanced popularity and interest are recently gained by the newer type, named hybrid UAV, that integrates the beneficial features of both conventional ones. In this survey paper, a systematic categorization method for the hybrid UAV's platform designs is introduced, first presenting the technical features and representative examples. Next, the hybrid UAV's flight dynamics model and flight control strategies are explained addressing several representative modeling and control work. In addition, key observations, existing challenges and conclusive remarks based on the conducted review are discussed accordingly.

Analytic modeling of aerosol size distributions

NASA Technical Reports Server (NTRS)

Deepack, A.; Box, G. P.

1979-01-01

Mathematical functions commonly used for representing aerosol size distributions are studied parametrically. Methods for obtaining best fit estimates of the parameters are described. A catalog of graphical plots depicting the parametric behavior of the functions is presented along with procedures for obtaining analytical representations of size distribution data by visual matching of the data with one of the plots. Examples of fitting the same data with equal accuracy by more than one analytic model are also given.

Infinite product expansion of the Fokker-Planck equation with steady-state solution.

PubMed

Martin, R J; Craster, R V; Kearney, M J

2015-07-08

We present an analytical technique for solving Fokker-Planck equations that have a steady-state solution by representing the solution as an infinite product rather than, as usual, an infinite sum. This method has many advantages: automatically ensuring positivity of the resulting approximation, and by design exactly matching both the short- and long-term behaviour. The efficacy of the technique is demonstrated via comparisons with computations of typical examples.

Design of Training Systems, Phase II-A Report. An Educational Technology Assessment Model (ETAM)

DTIC Science & Technology

1975-07-01

34format" for the perceptual tasks. This is applicable to auditory as well as visual tasks. Student Participation in Learning Route. When a student enters...skill formats Skill training 05.05 Vehicle properties Instructional functions: Type of stimulus presented to student visual auditory ...Subtask 05.05. For example, a trainer to identify and interpret auditory signals would not be represented in the above list. Trainers in the vehicle

Infinite product expansion of the Fokker–Planck equation with steady-state solution

PubMed Central

Martin, R. J.; Craster, R. V.; Kearney, M. J.

2015-01-01

We present an analytical technique for solving Fokker–Planck equations that have a steady-state solution by representing the solution as an infinite product rather than, as usual, an infinite sum. This method has many advantages: automatically ensuring positivity of the resulting approximation, and by design exactly matching both the short- and long-term behaviour. The efficacy of the technique is demonstrated via comparisons with computations of typical examples. PMID:26346100

Comparative Activity-Based Flavin-Dependent Oxidase Profiling.

PubMed

Krysiak, Joanna; Breinbauer, Rolf

2017-01-01

Activity-based protein profiling (ABPP) has become a powerful chemoproteomic technology allowing for the dissection of complex ligand-protein interactions in their native cellular environment. One of the biggest challenges for ABPP is the extension of the proteome coverage. In this chapter a new ABPP strategy dedicated to monoamine oxidases (MAO) is presented. These enzymes are representative examples of flavin-dependent oxidases, playing a crucial role in the regulation of nervous system signaling.

The 727/JT8D refan side nacelle airloads

NASA Technical Reports Server (NTRS)

Bailey, R. W.; Vadset, H. J.

1974-01-01

Airloads on the 727/JT8D refan side engine nacelle are presented. These consist of surface static pressure distributions from two low speed wind tunnel tests. External nacelle surface pressures are from testing of a flow-through, body mounted nacelle model, and internal inlet surface pressures are from performance testing of a forced air inlet model. The method for obtaining critical airloads on nacelle components and a representative example are discussed.

Structural and functional evidences for the interactions between nuclear hormone receptors and endocrine disruptors at low doses.

PubMed

Balaguer, Patrick; Delfosse, Vanessa; Grimaldi, Marina; Bourguet, William

Endocrine-disrupting chemicals (EDCs) represent a broad class of exogenous substances that cause adverse effects in the endocrine system mainly by interacting with nuclear hormone receptors (NRs). Humans are generally exposed to low doses of pollutants, and current researches aim at deciphering the mechanisms accounting for the health impact of EDCs at environmental concentrations. Our correlative analysis of structural, interaction and cell-based data has revealed a variety of, sometimes unexpected, binding modes, reflecting a wide range of EDC affinities and specificities. Here, we present a few representative examples to illustrate various means by which EDCs achieve high-affinity binding to NRs. These examples include the binding of the mycoestrogen α-zearalanol to estrogen receptors, the covalent interaction of organotins with the retinoid X- and peroxisome proliferator-activated receptors, and the cooperative binding of two chemicals to the pregnane X receptor. We also discuss some hypotheses that could further explain low-concentration effects of EDCs with weaker affinity towards NRs. Copyright © 2017. Published by Elsevier Masson SAS.

An illustration of the complexity of continent formation

NASA Technical Reports Server (NTRS)

Burke, Kevin

1988-01-01

It was pointed out that a consensus may be emerging in crustal growth models, considering the clustering of most growth curves and their uncertainties. Curves most distant from this clustering represent models involving extensive recycling of continental material back into the mantle, but the author wondered if geochemical signatures for this would be recognizable considering the lack of evidence from seismic tomography for discrete mantle reservoirs, and the likelihood of core-mantle interaction based on recent high pressure experiments. Unreactivated Archean rocks represent only 2 percent of present continental area, and the author was uncomfortable about basing inferences on what the early Earth was like on such a small amount of information. He feels that the hypothesis of continental assembly that needs testing is that of banging together of island arcs, such as in Indonesia today. As an example of how complex this process can be, the author described the geology of the Caribbean arc system, which shows evidence for reversals of subduction polarity, numerous collisional events, and substantial strike-slip movements. It seemed unlikely to the author that Archean examples would have been less complicated.

Cole-Cole broadening in dielectric relaxation and strange kinetics.

PubMed

Puzenko, Alexander; Ishai, Paul Ben; Feldman, Yuri

2010-07-16

We present a fresh appraisal of the Cole-Cole (CC) description of dielectric relaxation. While the approach is phenomenological, it demonstrates a fundamental connection between the parameters of the CC dispersion. Based on the fractal nature of the time set representing the interaction of the relaxing dipole with its encompassing matrix, and the Kirkwood-Froehlich correlation factor, a new 3D phase space linking together the kinetic and structural properties is proposed. The evolution of the relaxation process is represented in this phase space by a trajectory, which is determined by the variation of external macroscopic parameters. As an example, the validity of the approach is demonstrated on two porous silica glasses exhibiting a CC relaxation process.

Biased emotional recognition in depression: perception of emotions in music by depressed patients.

PubMed

Punkanen, Marko; Eerola, Tuomas; Erkkilä, Jaakko

2011-04-01

Depression is a highly prevalent mood disorder, that impairs a person's social skills and also their quality of life. Populations affected with depression also suffer from a higher mortality rate. Depression affects person's ability to recognize emotions. We designed a novel experiment to test the hypothesis that depressed patients show a judgment bias towards negative emotions. To investigate how depressed patients differ in their perception of emotions conveyed by musical examples, both healthy (n=30) and depressed (n=79) participants were presented with a set of 30 musical excerpts, representing one of five basic target emotions, and asked to rate each excerpt using five Likert scales that represented the amount of each one of those same emotions perceived in the example. Depressed patients showed moderate but consistent negative self-report biases both in the overall use of the scales and their particular application to certain target emotions, when compared to healthy controls. Also, the severity of the clinical state (depression, anxiety and alexithymia) had an effect on the self-report biases for both positive and negative emotion ratings, particularly depression and alexithymia. Only musical stimuli were used, and they were all clear examples of one of the basic emotions of happiness, sadness, fear, anger and tenderness. No neutral or ambiguous excerpts were included. Depressed patients' negative emotional bias was demonstrated using musical stimuli. This suggests that the evaluation of emotional qualities in music could become a means to discriminate between depressed and non-depressed subjects. The practical implications of the present study relate both to diagnostic uses of such perceptual evaluations, as well as a better understanding of the emotional regulation strategies of the patients. Copyright © 2010 Elsevier B.V. All rights reserved.

Contribution of piezometric measurement to knowledge and management of low water levels: examples on the chalk aquifer in the Champagne Ardennes region

NASA Astrophysics Data System (ADS)

Stollsteiner, P.; Bessiere, H.; Nicolas, J.; Allier, D.; Berthet, O.

2015-04-01

This article is based on a BRGM study on piezometric indicators, threshold values of discharge and groundwater levels for the assessment of potentially-exploitable water resources of chalky watersheds. A method for estimating low water levels based on groundwater levels is presented from three examples representing chalk aquifers with different cycles: annual, combined and interannual. The first is located in Picardy and the two others in the Champagne-Ardennes region. Piezometers with annual cycles, used in these examples, are supposed to be representative of the aquifer hydro-dynamics. Except for multi-annual systems, the analysis between discharge measurements at a hydrometric station and groundwater levels measured at a piezometer representative of the main aquifer, leads to relatively precise and satisfactory relationships within a chalky context. These relationships may be useful for monitoring, validation, extension or reconstruction of the low water flow data. On the one hand, they allow definition of the piezometric levels corresponding to the different alert thresholds of river discharges. On the other hand, they clarify the proportions of low surface water flow from runoff or drainage of the aquifer. Finally, these correlations give an assessment of the minimum flow for the coming weeks. However, these correlations cannot be used to optimize the value of the exploitable water resource because it seems to be difficult to integrate the value of the effective rainfall that could occur during the draining period. Moreover, in the case of multi-annual systems, the solution is to attempt a comprehensive system modelling and, if it is satisfactory, using the simulated values to get rid of parasites or running the model for forecasting purposes.

5 CFR 2635.807 - Teaching, speaking and writing.

Code of Federal Regulations, 2014 CFR

2014-01-01

... program. However, his title or position may not be used to promote the course, for example, by featuring... independent research and does not represent the findings of the CDC. Example 3: An employee of the Federal... writing deals generally with a subject within the agency's areas of responsibility. Example 1: The...

5 CFR 2635.807 - Teaching, speaking and writing.

Code of Federal Regulations, 2013 CFR

2013-01-01

... program. However, his title or position may not be used to promote the course, for example, by featuring... independent research and does not represent the findings of the CDC. Example 3: An employee of the Federal... writing deals generally with a subject within the agency's areas of responsibility. Example 1: The...

5 CFR 2635.807 - Teaching, speaking and writing.

Code of Federal Regulations, 2011 CFR

2011-01-01

... program. However, his title or position may not be used to promote the course, for example, by featuring... independent research and does not represent the findings of the CDC. Example 3: An employee of the Federal... writing deals generally with a subject within the agency's areas of responsibility. Example 1: The...

5 CFR 2635.807 - Teaching, speaking and writing.

Code of Federal Regulations, 2012 CFR

2012-01-01

... program. However, his title or position may not be used to promote the course, for example, by featuring... independent research and does not represent the findings of the CDC. Example 3: An employee of the Federal... writing deals generally with a subject within the agency's areas of responsibility. Example 1: The...

["Operationalised psychodynamic diagnostics in childhood and adolescence" (OPD-CA) in practice].

PubMed

Schulte-Markwort, Michael; Resch, Franz; Bürgin, Dieter

2004-02-01

"Operationalised psychodynamic diagnostics in childhood and adolescence" (OPD-CA) has been completed in its first version after years of development. In a first interview with a 13-year-old boy, the diagnostic instruments of OPD-CA are presented by means of examples. The text passages of the transcribed first interview are evaluated in four sections by representatives of the respective working groups regarding the axes--relationships, conflict, structure and preconditions for treatment--and the diagnostic conclusions resulting from this are presented, thus providing a direct insight into the specific psychodynamic diagnostics of OPD-CA.

Synthesis design of artificial magnetic metamaterials using a genetic algorithm.

PubMed

Chen, P Y; Chen, C H; Wang, H; Tsai, J H; Ni, W X

2008-08-18

In this article, we present a genetic algorithm (GA) as one branch of artificial intelligence (AI) for the optimization-design of the artificial magnetic metamaterial whose structure is automatically generated by computer through the filling element methodology. A representative design example, metamaterials with permeability of negative unity, is investigated and the optimized structures found by the GA are presented. It is also demonstrated that our approach is effective for the synthesis of functional magnetic and electric metamaterials with optimal structures. This GA-based optimization-design technique shows great versatility and applicability in the design of functional metamaterials.

Two and three dimensional grid generation by an algebraic homotopy procedure

NASA Technical Reports Server (NTRS)

Moitra, Anutosh

1990-01-01

An algebraic method for generating two- and three-dimensional grid systems for aerospace vehicles is presented. The method is based on algebraic procedures derived from homotopic relations for blending between inner and outer boundaries of any given configuration. Stable properties of homotopic maps have been exploited to provide near-orthogonality and specified constant spacing at the inner boundary. The method has been successfully applied to analytically generated blended wing-body configurations as well as discretely defined geometries such as the High-Speed Civil Transport Aircraft. Grid examples representative of the capabilities of the method are presented.

Principles of qualitative analysis in the chromatographic context.

PubMed

Valcárcel, M; Cárdenas, S; Simonet, B M; Carrillo-Carrión, C

2007-07-27

This article presents the state of the art of qualitative analysis in the framework of the chromatographic analysis. After establishing the differences between two main classes of qualitative analysis (analyte identification and sample classification/qualification) the particularities of instrumental qualitative analysis are commented on. Qualitative chromatographic analysis for sample classification/qualification through the so-called chromatographic fingerprint (for complex samples) or the volatiles profile (through the direct coupling headspace-mass spectrometry using the chromatograph as interface) is discussed. Next, more technical exposition of the qualitative chromatographic information is presented supported by a variety of representative examples.

Seeking a balance between the statistical and scientific elements in psychometrics.

PubMed

Wilson, Mark

2013-04-01

In this paper, I will review some aspects of psychometric projects that I have been involved in, emphasizing the nature of the work of the psychometricians involved, especially the balance between the statistical and scientific elements of that work. The intent is to seek to understand where psychometrics, as a discipline, has been and where it might be headed, in part at least, by considering one particular journey (my own). In contemplating this, I also look to psychometrics journals to see how psychometricians represent themselves to themselves, and in a complementary way, look to substantive journals to see how psychometrics is represented there (or perhaps, not represented, as the case may be). I present a series of questions in order to consider the issue of what are the appropriate foci of the psychometric discipline. As an example, I present one recent project at the end, where the roles of the psychometricians and the substantive researchers have had to become intertwined in order to make satisfactory progress. In the conclusion I discuss the consequences of such a view for the future of psychometrics.

Observing and understanding the ultrafast photochemistry in small molecules: applications to sunscreens.

PubMed

Baker, Lewis A; Stavros, Vasilios G

2016-09-01

In this review, we discuss the importance of biological and artificial photoprotection against overexposure to harmful ultraviolet radiation. Transient electronic and transient vibrational absorption spectroscopies are highlighted as important tools in understanding the energy transfer in small molecules, with a focus on the application to commercial sunscreens with representative examples given. Oxybenzone, a common ingredient in commercial sunscreens and sinapoyl malate, a biological sunscreen in plant leaves are presented as case studies.

SPAR demonstration problems. [for stress analysis

NASA Technical Reports Server (NTRS)

Yen, C. L.; Moore, R. A.; Whetstone, W. D.

1974-01-01

A series of examples are presented to indicate some of the principal functions of the SPAR system and to illustrate SPAR's control card-data card structure. Information in the following categories is given: (1) a description of the problem and, in most cases, comparisons with analytical solutions; (2) a list of the input cards; (3) a printout of the table of contents of the direct access library into which all SPAR output was directed; and (4) a few representative plots.

Quantitative analysis to guide orphan drug development.

PubMed

Lesko, L J

2012-08-01

The development of orphan drugs for rare diseases has made impressive strides in the past 10 years. There has been a surge in orphan drug designations, but new drug approvals have not kept up. This article presents a three-pronged hierarchical strategy for quantitative analysis of data at the descriptive, mechanistic, and systems levels of the biological system that could represent a standardized and rational approach to orphan drug development. Examples are provided to illustrate the concept.

Similarity solutions of reaction–diffusion equation with space- and time-dependent diffusion and reaction terms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ho, C.-L.; Lee, C.-C., E-mail: chieh.no27@gmail.com

2016-01-15

We consider solvability of the generalized reaction–diffusion equation with both space- and time-dependent diffusion and reaction terms by means of the similarity method. By introducing the similarity variable, the reaction–diffusion equation is reduced to an ordinary differential equation. Matching the resulting ordinary differential equation with known exactly solvable equations, one can obtain corresponding exactly solvable reaction–diffusion systems. Several representative examples of exactly solvable reaction–diffusion equations are presented.

18F-Labeling of Sensitive Biomolecules for Positron Emission Tomography

PubMed Central

Krishnan, Hema S.; Ma, Longle; Vasdev, Neil; Liang, Steven H.

2017-01-01

Positron emission tomography (PET) imaging study of fluorine-18 labeled biomolecules is an emerging and rapidly growing area for preclinical and clinical research. The present review focuses on recent advances in radiochemical methods for incorporating fluorine-18 into biomolecules via ‘direct’ or ‘indirect’ bioconjugation. Recently developed prosthetic groups and pre-targeting strategies, as well as representative examples in 18F-labeling of biomolecules in PET imaging research studies are highlighted. PMID:28704575

Sports pairs: insights on athletic talent; research reviews: twins with leukemia; parents and twins.

PubMed

Segal, Nancy L

2007-06-01

Twin research exploring genetic and environmental influences on athletic interests and talents is reviewed. Illustrative examples of twin athletes representing a variety of sports activities are presented. This is followed by an overview of twin studies offering critical insights into the onset and progress of leukemia. In the last section, timely events involving twins and parents of twins will be described--each case provides a new look at an old question.

Multilevel Complex Networks and Systems

NASA Astrophysics Data System (ADS)

Caldarelli, Guido

2014-03-01

Network theory has been a powerful tool to model isolated complex systems. However, the classical approach does not take into account the interactions often present among different systems. Hence, the scientific community is nowadays concentrating the efforts on the foundations of new mathematical tools for understanding what happens when multiple networks interact. The case of economic and financial networks represents a paramount example of multilevel networks. In the case of trade, trade among countries the different levels can be described by the different granularity of the trading relations. Indeed, we have now data from the scale of consumers to that of the country level. In the case of financial institutions, we have a variety of levels at the same scale. For example one bank can appear in the interbank networks, ownership network and cds networks in which the same institution can take place. In both cases the systemically important vertices need to be determined by different procedures of centrality definition and community detection. In this talk I will present some specific cases of study related to these topics and present the regularities found. Acknowledged support from EU FET Project ``Multiplex'' 317532.

Search Problems in Mission Planning and Navigation of Autonomous Aircraft. M.S. Thesis

NASA Technical Reports Server (NTRS)

Krozel, James A.

1988-01-01

An architecture for the control of an autonomous aircraft is presented. The architecture is a hierarchical system representing an anthropomorphic breakdown of the control problem into planner, navigator, and pilot systems. The planner system determines high level global plans from overall mission objectives. This abstract mission planning is investigated by focusing on the Traveling Salesman Problem with variations on local and global constraints. Tree search techniques are applied including the breadth first, depth first, and best first algorithms. The minimum-column and row entries for the Traveling Salesman Problem cost matrix provides a powerful heuristic to guide these search techniques. Mission planning subgoals are directed from the planner to the navigator for planning routes in mountainous terrain with threats. Terrain/threat information is abstracted into a graph of possible paths for which graph searches are performed. It is shown that paths can be well represented by a search graph based on the Voronoi diagram of points representing the vertices of mountain boundaries. A comparison of Dijkstra's dynamic programming algorithm and the A* graph search algorithm from artificial intelligence/operations research is performed for several navigation path planning examples. These examples illustrate paths that minimize a combination of distance and exposure to threats. Finally, the pilot system synthesizes the flight trajectory by creating the control commands to fly the aircraft.

Multidimensional stock network analysis: An Escoufier's RV coefficient approach

NASA Astrophysics Data System (ADS)

Lee, Gan Siew; Djauhari, Maman A.

2013-09-01

The current practice of stocks network analysis is based on the assumption that the time series of closed stock price could represent the behaviour of the each stock. This assumption leads to consider minimal spanning tree (MST) and sub-dominant ultrametric (SDU) as an indispensible tool to filter the economic information contained in the network. Recently, there is an attempt where researchers represent stock not only as a univariate time series of closed price but as a bivariate time series of closed price and volume. In this case, they developed the so-called multidimensional MST to filter the important economic information. However, in this paper, we show that their approach is only applicable for that bivariate time series only. This leads us to introduce a new methodology to construct MST where each stock is represented by a multivariate time series. An example of Malaysian stock exchange will be presented and discussed to illustrate the advantages of the method.

The Effect of Resolution on Detecting Visually Salient Preattentive Features

DTIC Science & Technology

2015-06-01

resolutions in descending order (a–e). The plot compiles the areas of interest displayed in the images and each symbol represents 1 of the images. Data...to particular regions in a scene by highly salient 2 features, for example, the color of the flower discussed in the previous example. These...descending order (a–e). The plot compiles the areas of interest displayed in the images and each symbol represents 1 of the images. Data clusters

A reference architecture for the component factory

NASA Technical Reports Server (NTRS)

Basili, Victor R.; Caldiera, Gianluigi; Cantone, Giovanni

1992-01-01

Software reuse can be achieved through an organization that focuses on utilization of life cycle products from previous developments. The component factory is both an example of the more general concepts of experience and domain factory and an organizational unit worth being considered independently. The critical features of such an organization are flexibility and continuous improvement. In order to achieve these features we can represent the architecture of the factory at different levels of abstraction and define a reference architecture from which specific architectures can be derived by instantiation. A reference architecture is an implementation and organization independent representation of the component factory and its environment. The paper outlines this reference architecture, discusses the instantiation process, and presents some examples of specific architectures by comparing them in the framework of the reference model.

GSTARS computer models and their applications, Part II: Applications

USGS Publications Warehouse

Simoes, F.J.M.; Yang, C.T.

2008-01-01

In part 1 of this two-paper series, a brief summary of the basic concepts and theories used in developing the Generalized Stream Tube model for Alluvial River Simulation (GSTARS) computer models was presented. Part 2 provides examples that illustrate some of the capabilities of the GSTARS models and how they can be applied to solve a wide range of river and reservoir sedimentation problems. Laboratory and field case studies are used and the examples show representative applications of the earlier and of the more recent versions of GSTARS. Some of the more recent capabilities implemented in GSTARS3, one of the latest versions of the series, are also discussed here with more detail. ?? 2008 International Research and Training Centre on Erosion and Sedimentation and the World Association for Sedimentation and Erosion Research.

Cost containment and KSC Shuttle facilities or cost containment and aerospace construction

NASA Technical Reports Server (NTRS)

Brown, J. A.

1985-01-01

This presentation has the objective to show examples of Cost Containment of Aerospace Construction at Kennedy Space Center (KSC), taking into account four major levels of Project Development of the Space Shuttle Facilities. The levels are related to conceptual criteria and site selection, the design of construction and ground support equipment, the construction of facilities and ground support equipment (GSE), and operation and maintenance. Examples of cost containment are discussed. The continued reduction of processing time from landing to launching represents a demonstration of the success of the cost containment methods. Attention is given to the factors which led to the selection of KSC, the use of Cost Engineering, the employment of the Construction Management Concept, and the use of Computer Aided Design/Drafting.

Aircraft geometry verification with enhanced computer generated displays

NASA Technical Reports Server (NTRS)

Cozzolongo, J. V.

1982-01-01

A method for visual verification of aerodynamic geometries using computer generated, color shaded images is described. The mathematical models representing aircraft geometries are created for use in theoretical aerodynamic analyses and in computer aided manufacturing. The aerodynamic shapes are defined using parametric bi-cubic splined patches. This mathematical representation is then used as input to an algorithm that generates a color shaded image of the geometry. A discussion of the techniques used in the mathematical representation of the geometry and in the rendering of the color shaded display is presented. The results include examples of color shaded displays, which are contrasted with wire frame type displays. The examples also show the use of mapped surface pressures in terms of color shaded images of V/STOL fighter/attack aircraft and advanced turboprop aircraft.

Computational organic chemistry: bridging theory and experiment in establishing the mechanisms of chemical reactions.

PubMed

Cheng, Gui-Juan; Zhang, Xinhao; Chung, Lung Wa; Xu, Liping; Wu, Yun-Dong

2015-02-11

Understanding the mechanisms of chemical reactions, especially catalysis, has been an important and active area of computational organic chemistry, and close collaborations between experimentalists and theorists represent a growing trend. This Perspective provides examples of such productive collaborations. The understanding of various reaction mechanisms and the insight gained from these studies are emphasized. The applications of various experimental techniques in elucidation of reaction details as well as the development of various computational techniques to meet the demand of emerging synthetic methods, e.g., C-H activation, organocatalysis, and single electron transfer, are presented along with some conventional developments of mechanistic aspects. Examples of applications are selected to demonstrate the advantages and limitations of these techniques. Some challenges in the mechanistic studies and predictions of reactions are also analyzed.

Uncertainty Modeling for Robustness Analysis of Control Upset Prevention and Recovery Systems

NASA Technical Reports Server (NTRS)

Belcastro, Christine M.; Khong, Thuan H.; Shin, Jong-Yeob; Kwatny, Harry; Chang, Bor-Chin; Balas, Gary J.

2005-01-01

Formal robustness analysis of aircraft control upset prevention and recovery systems could play an important role in their validation and ultimate certification. Such systems (developed for failure detection, identification, and reconfiguration, as well as upset recovery) need to be evaluated over broad regions of the flight envelope and under extreme flight conditions, and should include various sources of uncertainty. However, formulation of linear fractional transformation (LFT) models for representing system uncertainty can be very difficult for complex parameter-dependent systems. This paper describes a preliminary LFT modeling software tool which uses a matrix-based computational approach that can be directly applied to parametric uncertainty problems involving multivariate matrix polynomial dependencies. Several examples are presented (including an F-16 at an extreme flight condition, a missile model, and a generic example with numerous crossproduct terms), and comparisons are given with other LFT modeling tools that are currently available. The LFT modeling method and preliminary software tool presented in this paper are shown to compare favorably with these methods.

Symmetric functions and wavefunctions of XXZ-type six-vertex models and elliptic Felderhof models by Izergin-Korepin analysis

NASA Astrophysics Data System (ADS)

Motegi, Kohei

2018-05-01

We present a method to analyze the wavefunctions of six-vertex models by extending the Izergin-Korepin analysis originally developed for domain wall boundary partition functions. First, we apply the method to the case of the basic wavefunctions of the XXZ-type six-vertex model. By giving the Izergin-Korepin characterization of the wavefunctions, we show that these wavefunctions can be expressed as multiparameter deformations of the quantum group deformed Grothendieck polynomials. As a second example, we show that the Izergin-Korepin analysis is effective for analysis of the wavefunctions for a triangular boundary and present the explicit forms of the symmetric functions representing these wavefunctions. As a third example, we apply the method to the elliptic Felderhof model which is a face-type version and an elliptic extension of the trigonometric Felderhof model. We show that the wavefunctions can be expressed as one-parameter deformations of an elliptic analog of the Vandermonde determinant and elliptic symmetric functions.

Examples L-Band Interference will be Presented and Discussed, as well as the Importance of L-Band Soil Moisture Observations

NASA Technical Reports Server (NTRS)

Kim, Edward

2010-01-01

Examples of L-band interference will be presented and discussed, as well as the importance of L-band soil moisture observations, as part of this one-day GEOSS workshop XXXVII on "Data Quality and Radio Spectrum Allocation Impact on Earth Observations" will address the broad challenges of data quality and the impact of generating reliable information for decision makers who are Earth data users but not necessarily experts in the Earth observation field. GEO has initiated a data quality assessment task (DA-09-01a) and workshop users will review and debate the directions and challenges of this effort. Radio spectrum allocation is an element of data availability and data quality, and is also associated with a GEO task (AR-06-11). A recent U.S. National Research Council report on spectrum management will be addressed as part of the workshop. Key representatives from industry, academia, and government will provide invited talks on these and related issues that impact GEOSS implementation.

An exact solution for the history-dependent material and delamination behavior of laminated plates subjected to cylindrical bending

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Todd O

2009-01-01

The exact solution for the history-dependent behavior of laminated plates subjected to cylindrical bending is presented. The solution represents the extension of Pagano's solution to consider arbitrary types of constitutive behaviors for the individual lamina as well as arbitrary types of cohesive zones models for delamination behavior. Examples of the possible types of material behavior are plasticity, viscoelasticity, viscoplasticity, and damaging. Examples of possible CZMs that can be considered are linear, nonlinear hardening, as well as nonlinear with softening. The resulting solution is intended as a benchmark solution for considering the predictive capabilities of different plate theories. Initial results aremore » presented for several types of history-dependent material behaviors. It is shown that the plate response in the presence of history-dependent behaviors can differ dramatically from the elastic response. These results have strong implications for what constitutes an appropriate plate theory for modeling such behaviors.« less

Automatic road sign detecion and classification based on support vector machines and HOG descriptos

NASA Astrophysics Data System (ADS)

Adam, A.; Ioannidis, C.

2014-05-01

This paper examines the detection and classification of road signs in color-images acquired by a low cost camera mounted on a moving vehicle. A new method for the detection and classification of road signs is proposed based on color based detection, in order to locate regions of interest. Then, a circular Hough transform is applied to complete detection taking advantage of the shape properties of the road signs. The regions of interest are finally represented using HOG descriptors and are fed into trained Support Vector Machines (SVMs) in order to be recognized. For the training procedure, a database with several training examples depicting Greek road sings has been developed. Many experiments have been conducted and are presented, to measure the efficiency of the proposed methodology especially under adverse weather conditions and poor illumination. For the experiments training datasets consisting of different number of examples were used and the results are presented, along with some possible extensions of this work.

Allometric shell growth in infaunal burrowing bivalves: examples of the archiheterodonts Claibornicardia paleopatagonica (Ihering, 1903) and Crassatella kokeni Ihering, 1899.

PubMed

Perez, Damián Eduardo; Santelli, María Belén

2018-01-01

We present two cases of study of ontogenetic allometry in outlines of bivalves using longitudinal data, a rarity among fossils, based on the preserved post-larval record of shells. The examples are two infaunal burrowing bivalves of the southern South America, Claibornicardia paleopatagonica (Archiheterodonta: Carditidae) (early Paleocene) and Crassatella kokeni (Archiheterodonta: Crassatellidae) (late Oligocene-late Miocene). Outline analyses were conducted using a geometric morphometric approach (Elliptic Fourier Analysis), obtaining successive outlines from shells' growth lines, which were used to reconstruct ontogenetic trajectories. In both taxa, ontogenetic changes are characterized by the presence of positive allometry in the extension of posterior end, resulting in elongated adult shells. This particular allometric growth is known in others infaunal burrowing bivalves ( Claibornicardia alticostata and some Spissatella species) and the resulting adult morphology is present in representatives of several groups (e.g., Carditidae, Crassatellidae, Veneridae, Trigoniidae). Taxonomic, ecological and evolutionary implications of this allometric growth pattern are discussed.

Caititu: a tool to graphically represent peptide sequence coverage and domain distribution.

PubMed

Carvalho, Paulo C; Junqueira, Magno; Valente, Richard H; Domont, Gilberto B

2008-10-07

Here we present Caititu, an easy-to-use proteomics software to graphically represent peptide sequence coverage and domain distribution for different correlated samples (e.g. originated from 2D gel spots) relatively to the full-sequence of the known protein they are related to. Although Caititu has a broad applicability, we exemplify its usefulness in Toxinology using snake venom as a model. For example, proteolytic processing may lead to inactivation or loss of domains. Therefore, our proposed graphic representation for peptides identified by two dimensional electrophoresis followed by mass spectrometric identification of excised spots can aid in inferring what kind of processing happened to the toxins, if any. Caititu is freely available to download at: http://pcarvalho.com/things/caititu.

Dirac delta representation by exact parametric equations.. Application to impulsive vibration systems

NASA Astrophysics Data System (ADS)

Chicurel-Uziel, Enrique

2007-08-01

A pair of closed parametric equations are proposed to represent the Heaviside unit step function. Differentiating the step equations results in two additional parametric equations, that are also hereby proposed, to represent the Dirac delta function. These equations are expressed in algebraic terms and are handled by means of elementary algebra and elementary calculus. The proposed delta representation complies exactly with the values of the definition. It complies also with the sifting property and the requisite unit area and its Laplace transform coincides with the most general form given in the tables. Furthermore, it leads to a very simple method of solution of impulsive vibrating systems either linear or belonging to a large class of nonlinear problems. Two example solutions are presented.

Independent valine and leucine isotope labeling in Escherichia coli protein overexpression systems.

PubMed

Lichtenecker, Roman J; Weinhäupl, Katharina; Reuther, Lukas; Schörghuber, Julia; Schmid, Walther; Konrat, Robert

2013-11-01

The addition of labeled α-ketoisovalerate to the growth medium of a protein-expressing host organism has evolved into a versatile tool to achieve concomitant incorporation of specific isotopes into valine- and leucine- residues. The resulting target proteins represent excellent probes for protein NMR analysis. However, as the sidechain resonances of these residues emerge in a narrow spectral range, signal overlap represents a severe limitation in the case of high-molecular-weight NMR probes. We present a protocol to eliminate leucine labeling by supplying the medium with unlabeled α-ketoisocaproate. The resulting spectra of a model protein exclusively feature valine signals of increased intensity, confirming the method to be a first example of independent valine and leucine labeling employing α-ketoacid precursor compounds.

Operational factors affecting microgravity levels in orbit

NASA Technical Reports Server (NTRS)

Olsen, R. E.; Mockovciak, J., Jr.

1980-01-01

Microgravity levels desired for proposed materials processing payloads are fundamental considerations in the design of future space platforms. Disturbance sources, such as aerodynamic drag, attitude control torques, crew motion and orbital dynamics, influence the microgravity levels attainable in orbit. The nature of these effects are assessed relative to platform design parameters such as orbital altitude and configuration geometry, and examples are presented for a representative spacecraft configuration. The possible applications of control techniques to provide extremely low acceleration levels are also discussed.

Delay-Dependent Stability Criterion for Bidirectional Associative Memory Neural Networks with Interval Time-Varying Delays

NASA Astrophysics Data System (ADS)

Park, Ju H.; Kwon, O. M.

In the letter, the global asymptotic stability of bidirectional associative memory (BAM) neural networks with delays is investigated. The delay is assumed to be time-varying and belongs to a given interval. A novel stability criterion for the stability is presented based on the Lyapunov method. The criterion is represented in terms of linear matrix inequality (LMI), which can be solved easily by various optimization algorithms. Two numerical examples are illustrated to show the effectiveness of our new result.

Antisynchronization of Two Complex Dynamical Networks

NASA Astrophysics Data System (ADS)

Banerjee, Ranjib; Grosu, Ioan; Dana, Syamal K.

A nonlinear type open-plus-closed-loop (OPCL) coupling is investi-gated for antisynchronization of two complex networks under unidirectional and bidirectional interactions where each node of the networks is considered as a continuous dynamical system. We present analytical results for antisynchroni-zation in identical networks. A numerical example is given for unidirectional coupling with each node represented by a spiking-bursting type Hindmarsh-Rose neuron model. Antisynchronization for mutual interaction is allowed only to inversion symmetric dynamical systems as chosen nodes.

18 F-Labeling of Sensitive Biomolecules for Positron Emission Tomography.

PubMed

Krishnan, Hema S; Ma, Longle; Vasdev, Neil; Liang, Steven H

2017-11-07

Positron emission tomography (PET) imaging study of fluorine-18 labeled biomolecules is an emerging and rapidly growing area for preclinical and clinical research. The present review focuses on recent advances in radiochemical methods for incorporating fluorine-18 into biomolecules via "direct" or "indirect" bioconjugation. Recently developed prosthetic groups and pre-targeting strategies, as well as representative examples in 18 F-labeling of biomolecules in PET imaging research studies are highlighted. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Finding science in students' talk

NASA Astrophysics Data System (ADS)

Yeo, Jennifer

2009-12-01

What does it mean to understand science? This commentary extends Brown and Kloser's argument on the role of native language for science learning by exploring the meaning of understanding in school science and discusses the extent that science educators could tolerate adulterated forms of scientific knowledge. Taking the perspective of social semiotics, this commentary looks at the extent that school science can be represented with other discourse practices. It also offers an example to illustrate how everyday language can present potential hindrance to school science learning.

A Scapholunate Ligament-Sparing Technique Utilizing the Medial Femoral Condyle Corticocancellous Free Flap to Reconstruct Scaphoid Nonunions With Proximal Pole Avascular Necrosis.

PubMed

Kazmers, Nikolas H; Thibaudeau, Stephanie; Levin, L Scott

2016-09-01

This article demonstrates a technique for the treatment of scaphoid fracture waist and proximal pole nonunions with avascular necrosis using a free vascularized medial femoral condyle flap. We present our surgical technique and representative case examples in which the scapholunate ligament, a key structure required to preserve carpal kinematics, is spared. Copyright © 2016 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Inhibitors of Angiogenesis.

PubMed

Büning, H; Hacker, U T

Angiogenesis plays a pivotal role in malignant, ischemic, inflammatory, infectious and immune disorders. The increasing molecular understanding of angiogenic processes fostered the development of strategies to induce or inhibit angiogenesis for therapeutic purposes. Here, we focus on anti-angiogenic therapies, which represent a standard of care in the treatment of different cancer types and in neovascular age-related macular degeneration. Specifically, strategies related to the blockade of angiogenic proteins and receptors will be outlined covering both preclinical and clinical aspects. Finally, examples of gene therapy based anti-angiogenic approaches are presented.

Non-immunogenic, hydrophilic/cationic block copolymers and uses thereof

DOEpatents

Scales, Charles W.; Huang, Faqing; McCormick, Charles L.

2010-05-18

The present invention provides novel non-immunogenic, hydrophilic/cationic block copolymers comprising a neutral-hydrophilic polymer and a cationic polymer, wherein both polymers have well-defined chain-end functionality. A representative example of such a block copolymer comprises poly(N-(2-hydroxypropyl)methacrylamide) (PHPMA) and poly(N-[3-(dimethylamino)propyl]methacrylamide) (PDMAPMA). Also provided is a synthesis method thereof in aqueous media via reversible addition fragmentation chain transfer (RAFT) polymerization. Further provided are uses of these block copolymers as drug delivery vehicles and protection agents.

Time-correlated gust loads using matched filter theory and random process theory - A new way of looking at things

NASA Technical Reports Server (NTRS)

Pototzky, Anthony S.; Zeiler, Thomas A.; Perry, Boyd, III

1989-01-01

This paper describes and illustrates two ways of performing time-correlated gust-load calculations. The first is based on Matched Filter Theory; the second on Random Process Theory. Both approaches yield theoretically identical results and represent novel applications of the theories, are computationally fast, and may be applied to other dynamic-response problems. A theoretical development and example calculations using both Matched Filter Theory and Random Process Theory approaches are presented.

Unfolding and unfoldability of digital pulses in the z-domain

NASA Astrophysics Data System (ADS)

Regadío, Alberto; Sánchez-Prieto, Sebastián

2018-04-01

The unfolding (or deconvolution) technique is used in the development of digital pulse processing systems applied to particle detection. This technique is applied to digital signals obtained by digitization of analog signals that represent the combined response of the particle detectors and the associated signal conditioning electronics. This work describes a technique to determine if the signal is unfoldable. For unfoldable signals the characteristics of the unfolding system (unfolder) are presented. Finally, examples of the method applied to real experimental setup are discussed.

The Bach equations in spin-coefficient form

NASA Astrophysics Data System (ADS)

Forbes, Hamish

2018-06-01

Conformal gravity theories are defined by field equations that determine only the conformal structure of the spacetime manifold. The Bach equations represent an early example of such a theory, we present them here in component form in terms of spin- and boost-weighted spin-coefficients using the compacted spin-coefficient formalism. These equations can be used as an efficient alternative to the standard tensor form. As a simple application we solve the Bach equations for pp-wave and static spherically symmetric spacetimes.

An overview of the key routes to the best selling 5-membered ring heterocyclic pharmaceuticals

PubMed Central

2011-01-01

Summary This review presents a comprehensive overview on selected synthetic routes towards commercial drug compounds as published in both journal and patent literature. Owing to the vast number of potential structures, we have concentrated only on those drugs containing five-membered heterocycles and focused principally on the assembly of the heterocyclic core. In order to target the most representative chemical entities the examples discussed have been selected from the top 200 best selling drugs of recent years. PMID:21647262

Flap effectiveness appraisal for winged re-entry vehicles

NASA Astrophysics Data System (ADS)

de Rosa, Donato; Pezzella, Giuseppe; Donelli, Raffaele S.; Viviani, Antonio

2016-05-01

The interactions between shock waves and boundary layer are commonplace in hypersonic aerodynamics. They represent a very challenging design issue for hypersonic vehicle. A typical example of shock wave boundary layer interaction is the flowfield past aerodynamic surfaces during control. As a consequence, such flow interaction phenomena influence both vehicle aerodynamics and aerothermodynamics. In this framework, the present research effort describes the numerical activity performed to simulate the flowfield past a deflected flap in hypersonic flowfield conditions for a winged re-entry vehicle.

Time-correlated gust loads using Matched-Filter Theory and Random-Process Theory: A new way of looking at things

NASA Technical Reports Server (NTRS)

Pototzky, Anthony S.; Zeiler, Thomas A.; Perry, Boyd, III

1989-01-01

Two ways of performing time-correlated gust-load calculations are described and illustrated. The first is based on Matched Filter Theory; the second on Random Process Theory. Both approaches yield theoretically identical results and represent novel applications of the theories, are computationally fast, and may be applied to other dynamic-response problems. A theoretical development and example calculations using both Matched Filter Theory and Random Process Theory approaches are presented.

WPC Product Legends - Surface fronts and precipitation areas/symbols

Science.gov Websites

, etc...) drawn on each segment. For example, the image below shows a forming cold front. Frontolysis is other segment. Below is an example of a dissipating warm front. Precipitation Areas and Symbols Areas of an example) Below are symbols found on our short range forecasts that represent categories (and in

Chagas disease as a cause of heart failure and ventricular arrhythmias in patients long removed from endemic areas: an emerging problem in Europe.

PubMed

Vannucchi, Vieri; Tomberli, Benedetta; Zammarchi, Lorenzo; Fornaro, Alessandra; Castelli, Gabriele; Pieralli, Filippo; Berni, Andrea; Yacoub, Sophie; Bartoloni, Alessandro; Olivotto, Iacopo

2015-12-01

Chagas disease is a parasitic disease caused by the protozoan Trypanosoma cruzi. In endemic areas (South and Central America), Chagas disease represents a relevant public health issue, and is the most frequent cause of cardiomyopathy. In nonendemic areas, such as Europe, Chagas disease represents an emerging problem following the establishment of sizeable communities from Brazil and Bolivia. Chagas cardiomyopathy represents the most frequent and serious complication of chronic Chagas disease, affecting about 20-30% of patients, potentially leading to heart failure, arrhythmias, thromboembolism, stroke and sudden death. Because late complications of Chagas disease may develop several years or even decades after the acute infection, it may be extremely challenging to reach the correct diagnosis in patients long removed from the countries of origin. We report two examples of Chagas cardiomyopathy in South American women permanently residing in Italy for more than 20 years, presenting with cardiac manifestations ranging from left ventricular dysfunction and heart failure to isolated ventricular arrhythmias. The present review emphasizes that Chagas disease should be considered as a potential diagnosis in patients from endemic areas presenting with 'idiopathic' cardiac manifestations, even when long removed from their country of origin, with potential implications for treatment and control of Chagas disease transmission.

Rebuilding DEMATEL threshold value: an example of a food and beverage information system.

PubMed

Hsieh, Yi-Fang; Lee, Yu-Cheng; Lin, Shao-Bin

2016-01-01

This study demonstrates how a decision-making trial and evaluation laboratory (DEMATEL) threshold value can be quickly and reasonably determined in the process of combining DEMATEL and decomposed theory of planned behavior (DTPB) models. Models are combined to identify the key factors of a complex problem. This paper presents a case study of a food and beverage information system as an example. The analysis of the example indicates that, given direct and indirect relationships among variables, if a traditional DTPB model only simulates the effects of the variables without considering that the variables will affect the original cause-and-effect relationships among the variables, then the original DTPB model variables cannot represent a complete relationship. For the food and beverage example, a DEMATEL method was employed to reconstruct a DTPB model and, more importantly, to calculate reasonable DEMATEL threshold value for determining additional relationships of variables in the original DTPB model. This study is method-oriented, and the depth of investigation into any individual case is limited. Therefore, the methods proposed in various fields of study should ideally be used to identify deeper and more practical implications.

CELCAP: A Computer Model for Cogeneration System Analysis

NASA Technical Reports Server (NTRS)

1985-01-01

A description of the CELCAP cogeneration analysis program is presented. A detailed description of the methodology used by the Naval Civil Engineering Laboratory in developing the CELCAP code and the procedures for analyzing cogeneration systems for a given user are given. The four engines modeled in CELCAP are: gas turbine with exhaust heat boiler, diesel engine with waste heat boiler, single automatic-extraction steam turbine, and back-pressure steam turbine. Both the design point and part-load performances are taken into account in the engine models. The load model describes how the hourly electric and steam demand of the user is represented by 24 hourly profiles. The economic model describes how the annual and life-cycle operating costs that include the costs of fuel, purchased electricity, and operation and maintenance of engines and boilers are calculated. The CELCAP code structure and principal functions of the code are described to how the various components of the code are related to each other. Three examples of the application of the CELCAP code are given to illustrate the versatility of the code. The examples shown represent cases of system selection, system modification, and system optimization.

Chapter 28: Theory SkyNode

NASA Astrophysics Data System (ADS)

Wagner, R.; Norman, M. L.

Here we present a working example of a Basic SkyNode serving theoretical data. The data is taken from the Simulated Cluster Archive (SCA), a set of simulated X-ray clusters, where each cluster was computed using four different physics models. The LCA Theory SkyNode (LCATheory) tables contain columns of the integrated physical properties of the clusters at various redshifts. The ease of setting up a Theory SkyNode is an important result, because it represents a clear way to present theory data to the Virtual Observatory. Also, our Theory SkyNode provides a prototype for additional simulated object catalogs, which will be created from other simulations by our group, and hopefully others.

Computational fluid dynamics applications at McDonnel Douglas

NASA Technical Reports Server (NTRS)

Hakkinen, R. J.

1987-01-01

Representative examples are presented of applications and development of advanced Computational Fluid Dynamics (CFD) codes for aerodynamic design at the McDonnell Douglas Corporation (MDC). Transonic potential and Euler codes, interactively coupled with boundary layer computation, and solutions of slender-layer Navier-Stokes approximation are applied to aircraft wing/body calculations. An optimization procedure using evolution theory is described in the context of transonic wing design. Euler methods are presented for analysis of hypersonic configurations, and helicopter rotors in hover and forward flight. Several of these projects were accepted for access to the Numerical Aerodynamic Simulation (NAS) facility at the NASA-Ames Research Center.

Visualization of instationary flows by particle traces

NASA Astrophysics Data System (ADS)

Raasch, S.

An abstract on a study which represents a model of atmospheric flow output by computer movies is presented. The structure and evolution of the flow is visualized by starting weightless particles at the locations of the model grid points at distinct, equally spaced times. These particles are then only advected by the flow. In order to avoid useless accumulation of particles, they can be provided with a limited lifetime. Scalar quantities can be shown in addition to using color shaded contours as background information. A movie with several examples of atmospheric flows, for example convection in the atmospheric boundary layer, slope winds, land seabreeze and Kelvin-Helmholtz waves is presented. The simulations are performed by two dimensional and three dimensional nonhydrostatic, finite difference models. Graphics are produced by using the UNIRAS software and the graphic output is in form of CGM metafiles. The single frames are stored on an ABEKAS real time video disc and then transferred to a BETACAM-SP tape recorder. The graphic software is suitable to produce 2 dimensional pictures, for example only cross sections of three dimensional simulations can be made. To produce a movie of typically 90 seconds duration, the graphic software and the particle model need about 10 hours CPU time on a CCD CYBER 990 and the CGM metafile has a size of about 1.4 GByte.

Discrete-Element bonded-particle Sea Ice model DESIgn, version 1.3a - model description and implementation

NASA Astrophysics Data System (ADS)

Herman, Agnieszka

2016-04-01

This paper presents theoretical foundations, numerical implementation and examples of application of the two-dimensional Discrete-Element bonded-particle Sea Ice model - DESIgn. In the model, sea ice is represented as an assemblage of objects of two types: disk-shaped "grains" and semi-elastic bonds connecting them. Grains move on the sea surface under the influence of forces from the atmosphere and the ocean, as well as interactions with surrounding grains through direct contact (Hertzian contact mechanics) and/or through bonds. The model has an experimental option of taking into account quasi-three-dimensional effects related to the space- and time-varying curvature of the sea surface, thus enabling simulation of ice breaking due to stresses resulting from bending moments associated with surface waves. Examples of the model's application to simple sea ice deformation and breaking problems are presented, with an analysis of the influence of the basic model parameters ("microscopic" properties of grains and bonds) on the large-scale response of the modeled material. The model is written as a toolbox suitable for usage with the open-source numerical library LIGGGHTS. The code, together with full technical documentation and example input files, is freely available with this paper and on the Internet.

Passive and Self-Powered Autonomous Sensors for Remote Measurements

PubMed Central

Sardini, Emilio; Serpelloni, Mauro

2009-01-01

Autonomous sensors play a very important role in the environmental, structural, and medical fields. The use of this kind of systems can be expanded for several applications, for example in implantable devices inside the human body where it is impossible to use wires. Furthermore, they enable measurements in harsh or hermetic environments, such as under extreme heat, cold, humidity or corrosive conditions. The use of batteries as a power supply for these devices represents one solution, but the size, and sometimes the cost and unwanted maintenance burdens of replacement are important drawbacks. In this paper passive and self-powered autonomous sensors for harsh or hermetical environments without batteries are discussed. Their general architectures are presented. Sensing strategies, communication techniques and power management are analyzed. Then, general building blocks of an autonomous sensor are presented and the design guidelines that such a system must follow are given. Furthermore, this paper reports different proposed applications of autonomous sensors applied in harsh or hermetic environments: two examples of passive autonomous sensors that use telemetric communication are proposed, the first one for humidity measurements and the second for high temperatures. Other examples of self-powered autonomous sensors that use a power harvesting system from electromagnetic fields are proposed for temperature measurements and for airflow speeds. PMID:22399949

Passive and self-powered autonomous sensors for remote measurements.

PubMed

Sardini, Emilio; Serpelloni, Mauro

2009-01-01

Autonomous sensors play a very important role in the environmental, structural, and medical fields. The use of this kind of systems can be expanded for several applications, for example in implantable devices inside the human body where it is impossible to use wires. Furthermore, they enable measurements in harsh or hermetic environments, such as under extreme heat, cold, humidity or corrosive conditions. The use of batteries as a power supply for these devices represents one solution, but the size, and sometimes the cost and unwanted maintenance burdens of replacement are important drawbacks. In this paper passive and self-powered autonomous sensors for harsh or hermetical environments without batteries are discussed. Their general architectures are presented. Sensing strategies, communication techniques and power management are analyzed. Then, general building blocks of an autonomous sensor are presented and the design guidelines that such a system must follow are given. Furthermore, this paper reports different proposed applications of autonomous sensors applied in harsh or hermetic environments: two examples of passive autonomous sensors that use telemetric communication are proposed, the first one for humidity measurements and the second for high temperatures. Other examples of self-powered autonomous sensors that use a power harvesting system from electromagnetic fields are proposed for temperature measurements and for airflow speeds.

Art, fisheries and ethnobiology.

PubMed

Begossi, Alpina; Caires, Rodrigo

2015-02-23

Nature is perceived in a variety of forms, and the perception of nature can also be expressed in different ways. Local art may represent the perception of nature by humans. It can embody perception, imagination and wisdom. Local art, in particular, reflects how people interact with nature. For example, when studying the representation of fish by different cultures, it is possible to access information on the fish species found in the environment, on its relative importance, and on historical events, among others. In this context, art can be used to obtain information on historical events, species abundance, ecology, and behaviour, for example. It can also serve to compare baselines by examining temporal and spatial scales. This study aims to analyse art and nature from a human ecological perspective: art can understood as an indicator of fish abundance or salience. Art has a variety of dimensions and perspectives. Art can also be associated with conservation ecology, being useful to reinterpret ecological baselines. A variety of paintings on fish, as well as paintings from local art, are explored in this study. They are analyzed as representing important fish, spatially and historically. A survey regarding the fish found in different paintings was conducted using art books and museum books. Pictures were taken by visiting museums, particularly for local or traditional art (Australia and Cape Town). The fish illustrated here seem to be commonly important in terms of salience. For example, Coryphaena spp. is abundant in Greece, Nile tilapia in Egypt, Gadus morhua in the Netherlands, as well as barracuda in Australia; salience is also applied to useful, noticeable or beautiful organisms, such as Carassius auratus (China). Another aspect of salience, the diversity of a group, is also represented by the panel where Uraspis uraspis appears to be depicted. Regarding the evaluation of baselines, we should consider that art may represent abundant fish in certain historic periods and geographic regions. Art could be an important temporal and geographical indicator to discover preterit information on the abundance of fish and compare it to present abundance.

Excimer Pumped Pulsed Tunable Dye Laser

NASA Astrophysics Data System (ADS)

Littman, Michael G.

1988-06-01

It has been recently shown and reported for the first time at this meeting, that Excimer pumping of a single-mode, short-cavity, grazing-incidence, longitudinally-pumped pulsed dye laser is feasible. In this paper the key concepts upon which this latest development is based are presented and are in a somewhat unusual form. This manuscript describes five specific dye laser examples. The five examples represent a progression from the simplest type of dye laser to the single-mode version mentioned above. The examples thus serve as a tutorial introduction to potential users of dye lasers. The article is organized into five sections or STEPS, each of which describes a different pulsed dye laser. Since the subtle points about dye lasers are best appreciated only after one actually attempts to build a working model, a PROCEDURES category is included in which details about the construction of the particular form of laser are given. As one reads through this category, think of it as looking over the shoulder of the laser builder. The NOTES category which follows is a brief but essential discussion explaining why various components and procedures are used, as well as how laser performance specifications are obtained. This subsection can he viewed as a discussion with the laser builder concerning the reasons for specific actions and choices made in the assembly of the example laser. The last category contains COMMENTS which provide additional related information pertaining to the example laser that goes beyond the earlier annotated discussion. If you like, these are the narrator's comments. At the end of the article, after the five sequential forms of the laser have been presented, there is a brief summation.

Modal element method for scattering of sound by absorbing bodies

NASA Technical Reports Server (NTRS)

Baumeister, Kenneth J.; Kreider, Kevin L.

1992-01-01

The modal element method for acoustic scattering from 2-D body is presented. The body may be acoustically soft (absorbing) or hard (reflecting). The infinite computational region is divided into two subdomains - the bounded finite element domain, which is characterized by complicated geometry and/or variable material properties, and the surrounding unbounded homogeneous domain. The acoustic pressure field is represented approximately in the finite element domain by a finite element solution, and is represented analytically by an eigenfunction expansion in the homogeneous domain. The two solutions are coupled by the continuity of pressure and velocity across the interface between the two subdomains. Also, for hard bodies, a compact modal ring grid system is introduced for which computing requirements are drastically reduced. Analysis for 2-D scattering from solid and coated (acoustically treated) bodies is presented, and several simple numerical examples are discussed. In addition, criteria are presented for determining the number of modes to accurately resolve the scattered pressure field from a solid cylinder as a function of the frequency of the incoming wave and the radius of the cylinder.

User's Manual and Final Report for Hot-SMAC GUI Development

NASA Technical Reports Server (NTRS)

Yarrington, Phil

2001-01-01

A new software package called Higher Order Theory-Structural/Micro Analysis Code (HOT-SMAC) has been developed as an effective alternative to the finite element approach for Functionally Graded Material (FGM) modeling. HOT-SMAC is a self-contained package including pre- and post-processing through an intuitive graphical user interface, along with the well-established Higher Order Theory for Functionally Graded Materials (HOTFGM) thermomechanical analysis engine. This document represents a Getting Started/User's Manual for HOT-SMAC and a final report for its development. First, the features of the software are presented in a simple step-by-step example where a HOT-SMAC model representing a functionally graded material is created, mechanical and thermal boundary conditions are applied, the model is analyzed and results are reviewed. In a second step-by-step example, a HOT-SMAC model of an actively cooled metallic channel with ceramic thermal barrier coating is built and analyzed. HOT-SMAC results from this model are compared to recently published results (NASA/TM-2001-210702) for two grid densities. Finally, a prototype integration of HOTSMAC with the commercially available HyperSizer(R) structural analysis and sizing software is presented. In this integration, local strain results from HyperSizer's structural analysis are fed to a detailed HOT-SMAC model of the flange-to-facesheet bond region of a stiffened panel. HOT-SMAC is then used to determine the peak shear and peel (normal) stresses between the facesheet and bonded flange of the panel and determine the "free edge" effects.

Phylogeny, integration and expression of sigma virus-like genes in Drosophila.

PubMed

Ballinger, Matthew J; Bruenn, Jeremy A; Taylor, Derek J

2012-10-01

The recent and surprising discovery of widespread NIRVs (non-retroviral integrated RNA viruses) has highlighted the importance of genomic interactions between non-retroviral RNA viruses and their eukaryotic hosts. Among the viruses with integrated representatives are the rhabdoviruses, a family of negative sense single-stranded RNA viruses. We identify sigma virus-like NIRVs of Drosophila spp. that represent unique cases where NIRVs are closely related to exogenous RNA viruses in a model host organism. We have used a combination of bioinformatics and laboratory methods to explore the evolution and expression of sigma virus-like NIRVs in Drosophila. Recent integrations in Drosophila provide a promising experimental system to study functionality of NIRVs. Moreover, the genomic architecture of recent NIRVs provides an unusual evolutionary window on the integration mechanism. For example, we found that a sigma virus-like polymerase associated protein (P) gene appears to have been integrated by template switching of the blastopia-like LTR retrotransposon. The sigma virus P-like NIRV is present in multiple retroelement fused open reading frames on the X and 3R chromosomes of Drosophila yakuba - the X-linked copy is transcribed to produce an RNA product in adult flies. We present the first account of sigma virus-like NIRVs and the first example of NIRV expression in a model animal system, and therefore provide a platform for further study of the possible functions of NIRVs in animal hosts. Copyright © 2012 Elsevier Inc. All rights reserved.

A transferable coarse-grained model for diphenylalanine: How to represent an environment driven conformational transition

NASA Astrophysics Data System (ADS)

Dalgicdir, Cahit; Sensoy, Ozge; Peter, Christine; Sayar, Mehmet

2013-12-01

One of the major challenges in the development of coarse grained (CG) simulation models that aim at biomolecular structure formation processes is the correct representation of an environment-driven conformational change, for example, a folding/unfolding event upon interaction with an interface or upon aggregation. In the present study, we investigate this transferability challenge for a CG model using the example of diphenylalanine. This dipeptide displays a transition from a trans-like to a cis-like conformation upon aggregation as well as upon transfer from bulk water to the cyclohexane/water interface. Here, we show that one can construct a single CG model that can reproduce both the bulk and interface conformational behavior and the segregation between hydrophobic/hydrophilic medium. While the general strategy to obtain nonbonded interactions in the present CG model is to reproduce solvation free energies of small molecules representing the CG beads in the respective solvents, the success of the model strongly depends on nontrivial decisions one has to make to capture the delicate balance between the bonded and nonbonded interactions. In particular, we found that the peptide's conformational behavior is qualitatively affected by the cyclohexane/water interaction potential, an interaction that does not directly involve the peptide at all but merely influences the properties of the hydrophobic/hydrophilic interface. Furthermore, we show that a small modification to improve the structural/conformational properties of the CG model could dramatically alter the thermodynamic properties.

Comparative and Predictive Multimedia Assessments Using Monte Carlo Uncertainty Analyses

NASA Astrophysics Data System (ADS)

Whelan, G.

2002-05-01

Multiple-pathway frameworks (sometimes referred to as multimedia models) provide a platform for combining medium-specific environmental models and databases, such that they can be utilized in a more holistic assessment of contaminant fate and transport in the environment. These frameworks provide a relatively seamless transfer of information from one model to the next and from databases to models. Within these frameworks, multiple models are linked, resulting in models that consume information from upstream models and produce information to be consumed by downstream models. The Framework for Risk Analysis in Multimedia Environmental Systems (FRAMES) is an example, which allows users to link their models to other models and databases. FRAMES is an icon-driven, site-layout platform that is an open-architecture, object-oriented system that interacts with environmental databases; helps the user construct a Conceptual Site Model that is real-world based; allows the user to choose the most appropriate models to solve simulation requirements; solves the standard risk paradigm of release transport and fate; and exposure/risk assessments to people and ecology; and presents graphical packages for analyzing results. FRAMES is specifically designed allow users to link their own models into a system, which contains models developed by others. This paper will present the use of FRAMES to evaluate potential human health exposures using real site data and realistic assumptions from sources, through the vadose and saturated zones, to exposure and risk assessment at three real-world sites, using the Multimedia Environmental Pollutant Assessment System (MEPAS), which is a multimedia model contained within FRAMES. These real-world examples use predictive and comparative approaches coupled with a Monte Carlo analysis. A predictive analysis is where models are calibrated to monitored site data, prior to the assessment, and a comparative analysis is where models are not calibrated but based solely on literature or judgement and is usually used to compare alternatives. In many cases, a combination is employed where the model is calibrated to a portion of the data (e.g., to determine hydrodynamics), then used to compare alternatives. Three subsurface-based multimedia examples are presented, increasing in complexity. The first presents the application of a predictive, deterministic assessment; the second presents a predictive and comparative, Monte Carlo analysis; and the third presents a comparative, multi-dimensional Monte Carlo analysis. Endpoints are typically presented in terms of concentration, hazard, risk, and dose, and because the vadose zone model typically represents a connection between a source and the aquifer, it does not generally represent the final medium in a multimedia risk assessment.

Stochasticity and determinism in models of hematopoiesis.

PubMed

Kimmel, Marek

2014-01-01

This chapter represents a novel view of modeling in hematopoiesis, synthesizing both deterministic and stochastic approaches. Whereas the stochastic models work in situations where chance dominates, for example when the number of cells is small, or under random mutations, the deterministic models are more important for large-scale, normal hematopoiesis. New types of models are on the horizon. These models attempt to account for distributed environments such as hematopoietic niches and their impact on dynamics. Mixed effects of such structures and chance events are largely unknown and constitute both a challenge and promise for modeling. Our discussion is presented under the separate headings of deterministic and stochastic modeling; however, the connections between both are frequently mentioned. Four case studies are included to elucidate important examples. We also include a primer of deterministic and stochastic dynamics for the reader's use.

Challenges in Rotorcraft Acoustic Flight Prediction and Validation

NASA Technical Reports Server (NTRS)

Boyd, D. Douglas, Jr.

2003-01-01

Challenges associated with rotorcraft acoustic flight prediction and validation are examined. First, an outline of a state-of-the-art rotorcraft aeroacoustic prediction methodology is presented. Components including rotorcraft aeromechanics, high resolution reconstruction, and rotorcraft acoustic prediction arc discussed. Next, to illustrate challenges and issues involved, a case study is presented in which an analysis of flight data from a specific XV-15 tiltrotor acoustic flight test is discussed in detail. Issues related to validation of methodologies using flight test data are discussed. Primary flight parameters such as velocity, altitude, and attitude are discussed and compared for repeated flight conditions. Other measured steady state flight conditions are examined for consistency and steadiness. A representative example prediction is presented and suggestions are made for future research.

Avengers Assemble! Using pop-culture icons to communicate science

PubMed Central

2014-01-01

Engaging communication of complex scientific concepts with the general public requires more than simplification. Compelling, relevant, and timely points of linkage between scientific concepts and the experiences and interests of the general public are needed. Pop-culture icons such as superheroes can represent excellent opportunities for exploring scientific concepts in a mental “landscape” that is comfortable and familiar. Using an established icon as a familiar frame of reference, complex scientific concepts can then be discussed in a more accessible manner. In this framework, scientists and the general public use the cultural icon to occupy a commonly known performance characteristic. For example, Batman represents a globally recognized icon who represents the ultimate response to exercise and training. The physiology that underlies Batman's abilities can then be discussed and explored using real scientific examples that highlight truths and fallacies contained in the presentation of pop-culture icons. Critically, it is not important whether the popular representation of the icon shows correct science because the real science can be revealed in discussing the character through this lens. Scientists and educators can then use these icons as foils for exploring complex ideas in a context that is less threatening and more comfortable for the target audience. A “middle-ground hypothesis” for science communication is proposed in which pop-culture icons are used to exploring scientific concepts in a bridging mental landscape that is comfortable and familiar. This approach is encouraged for communication with all nonscientists regardless of age. PMID:25039082

Avengers Assemble! Using pop-culture icons to communicate science.

PubMed

Zehr, E Paul

2014-06-01

Engaging communication of complex scientific concepts with the general public requires more than simplification. Compelling, relevant, and timely points of linkage between scientific concepts and the experiences and interests of the general public are needed. Pop-culture icons such as superheroes can represent excellent opportunities for exploring scientific concepts in a mental “landscape” that is comfortable and familiar. Using an established icon as a familiar frame of reference, complex scientific concepts can then be discussed in a more accessible manner. In this framework, scientists and the general public use the cultural icon to occupy a commonly known performance characteristic. For example, Batman represents a globally recognized icon who represents the ultimate response to exercise and training. The physiology that underlies Batman’s abilities can then be discussed and explored using real scientific examples that highlight truths and fallacies contained in the presentation of pop-culture icons. Critically, it is not important whether the popular representation of the icon shows correct science because the real science can be revealed in discussing the character through this lens. Scientists and educators can then use these icons as foils for exploring complex ideas in a context that is less threatening and more comfortable for the target audience. A “middle-ground hypothesis” for science communication is proposed in which popculture icons are used to exploring scientific concepts in a bridging mental landscape that is comfortable and familiar. This approach is encouraged for communication with all nonscientists regardless of age.

Using Artificial Life to Assess the Typicality of Terrestrial Life: Implications for Human Mission Planetary Protection

NASA Technical Reports Server (NTRS)

Lupisella, Mark; Powers, Edward I. (Technical Monitor)

2001-01-01

The extent to which extraterrestrial life questions can be addressed, in the absence of an actual example, rests in some measure on the extent to which terrestrial life is representative of life in general since we will likely have to draw heavily, if not completely, from terrestrial life research. One example of a practical question involving extraterrestrial life that arises in preparing for a human mission to another planet such as Mars, is trying to assess and minimize the possible adverse effects of the presence of humans on possible indigenous extraterrestrial life-forms. This paper will present some key planetary protection challenges for a human Mars mission and then focus on one possible approach for assessing the extent to which terrestrial life is representative of biological phenomena in general, informing perhaps, the level of confidence we might have in applying terrestrial research - to extraterrestrial life issues. The approach involves appealing to the relatively new field of Artificial Life (A-Life) to: (1) use what might be the most basic minimal set of life-defining characteristics in (2) a large number of open-ended Artificial Life simulations to generate a "life possibility space" (3) the products of which can be examined for their plausibility within the context of relevant constraining knowledge, so that (4) the remaining possibility space can be examined for its variability relative to terrestrial life, where low variability might suggest that terrestrial life is representative of life in general, and high variability would indicate otherwise.

Optimization with artificial neural network systems - A mapping principle and a comparison to gradient based methods

NASA Technical Reports Server (NTRS)

Leong, Harrison Monfook

1988-01-01

General formulae for mapping optimization problems into systems of ordinary differential equations associated with artificial neural networks are presented. A comparison is made to optimization using gradient-search methods. The performance measure is the settling time from an initial state to a target state. A simple analytical example illustrates a situation where dynamical systems representing artificial neural network methods would settle faster than those representing gradient-search. Settling time was investigated for a more complicated optimization problem using computer simulations. The problem was a simplified version of a problem in medical imaging: determining loci of cerebral activity from electromagnetic measurements at the scalp. The simulations showed that gradient based systems typically settled 50 to 100 times faster than systems based on current neural network optimization methods.

An investigation of the representativity of neuropsychiatrists and their patients in a drug utilization observation study on fluoxetine.

PubMed

Schaaf, B; Linden, M; Weber, H J

1997-01-01

This study presents a methodological approach to an expost facto investigation of sample bias in drug utilization observation (DUO) studies using the example of a DUO with the nontricyclic antidepressant fluoxetine. A total of 479 psychiatrists and neurologists and 2,401 patients were investigated. The purpose of the study was to judge the representativeness of our DUO sample for two populations: first, for all psychiatrics and neurologists prescribing fluoxetine or all patients being treated with fluoxetine in Germany and, second, for all psychiatrists and neurologists prescribing antidepressants or all patients being treated with antidepressants in Germany. Criteria for the representativeness test were physician variables (gender, size of community where practicing, federal state, age, volume of prescriptions) and patient variables (gender, age, prescription-related diagnosis, concurrent illnesses, concomitant medications). The study shows that the DUO sample can rightfully claim representativeness in the majority of parameters for the psychiatrists and neurologists prescribing fluoxetine and for the patients being treated with fluoxetine. There are more noticeable discrepancies with regard to the psychiatrists and neurologists in general and to the patients being treated with antidepressants in general. The methodological problems of pharmacoepidemiological investigation of representativeness are discussed.

Art and dystonia.

PubMed

Garcia-Ruiz, Pedro J; Slawek, Jaroslaw; Sitek, Emilia J; Martinez Castrillo, Juan Carlos

2015-09-15

Dystonia has a recent history in medicine. Focal dystonia was described in the 19th century by classic authors including Gowers, whilst generalized dystonia was described at the turn of the century. However, it is possible to find precise descriptions of dystonia in art, centuries before the medical definition. We have reviewed several pieces of art (sculpture, painting and literature) across the history that might represent descriptions of dystonia, from ancient period to nowadays. In classic times, the first reference to abnormal postures can be tracked back to the new Empire of Egypt (equinus foot), not to mention some recently described examples of dystonia from the Moche sculptures in Peru or Veracruz culture from Mexico. In Middle Ages it is possible to find many examples of sculptures in European cathedrals representing peasants with dramatic, presumably dystonic postures that coexist with amputation of limbs. This unique combination of dystonia and limb amputation probably represents ergotism. The painters Brueghel, Ribera and Velazquez also represented figures with postures likely to be dystonic. Literature is also a source of precise pre-neurological descriptions, especially during the 19th century. In David Copperfield, Dickens depicts characters with generalized dystonia (Uriah Heep), cervical dystonia (Mr. Sharp) and spasmodic dysphonia (Mr Creakle). Finally, even in modern Art (19th and 20th centuries), there are dramatic descriptions of abnormal postures that are likely to be dystonic, such as painful cervical dystonia (Brancusi), cervical dystonia with sensory trick (Modigliani) and upper limb dystonia (Wyspianski). However some postures presented in works of art may simply be a form of artistic expression and only bear unintentional resemblance to the dystonic postures. Art may be a source of neurological information, and that includes primary and secondary dystonia. Copyright © 2015 Elsevier B.V. All rights reserved.

Three trepanned skulls from the Copacabana Peninsula in the Titicaca Basin, Bolivia (800 BC-AD 1000).

PubMed

Juengst, Sara L; Chávez, Sergio J

2015-06-01

This paper presents three trepanned skulls from the Copacabana Peninsula in the Titicaca Basin, dating from 800 BC to AD 1000. Trepanation has been practiced for two millennia in the Andes, with the earliest specimens coming from the coastal Paracas culture (circa 400 BC). Trepanned skulls have been found throughout the Andes, displaying a variety of techniques. This modification was practiced as surgical intervention after injury and treatment for headaches and other ailments, among other reasons (Verano, 2003: 234). With the exception of four examples from the Island of the Sun, few early cases of trepanation have been found in the Titicaca Basin of Peru and Bolivia. The three skulls presented here are important for several reasons: (1) they originate from a region under-represented in the literature on Andean trepanation, (2) they represent a variety of trepanation techniques, and (3) they confirm the practice of trepanation in the lake basin during the Early Horizon. Copyright © 2014 Elsevier Inc. All rights reserved.

Efficient vibration mode analysis of aircraft with multiple external store configurations

NASA Technical Reports Server (NTRS)

Karpel, M.

1988-01-01

A coupling method for efficient vibration mode analysis of aircraft with multiple external store configurations is presented. A set of low-frequency vibration modes, including rigid-body modes, represent the aircraft. Each external store is represented by its vibration modes with clamped boundary conditions, and by its rigid-body inertial properties. The aircraft modes are obtained from a finite-element model loaded by dummy rigid external stores with fictitious masses. The coupling procedure unloads the dummy stores and loads the actual stores instead. The analytical development is presented, the effects of the fictitious mass magnitudes are discussed, and a numerical example is given for a combat aircraft with external wing stores. Comparison with vibration modes obtained by a direct (full-size) eigensolution shows very accurate coupling results. Once the aircraft and stores data bases are constructed, the computer time for analyzing any external store configuration is two to three orders of magnitude less than that of a direct solution.

Propagation of flexural and membrane waves with fluid loaded NASTRAN plate and shell elements

NASA Technical Reports Server (NTRS)

Kalinowski, A. J.; Wagner, C. A.

1983-01-01

Modeling of flexural and membrane type waves existing in various submerged (or in vacuo) plate and/or shell finite element models that are excited with steady state type harmonic loadings proportioned to e(i omega t) is discussed. Only thin walled plates and shells are treated wherein rotary inertia and shear correction factors are not included. More specifically, the issue of determining the shell or plate mesh size needed to represent the spatial distribution of the plate or shell response is of prime importance towards successfully representing the solution to the problem at hand. To this end, a procedure is presented for establishing guide lines for determining the mesh size based on a simple test model that can be used for a variety of plate and shell configurations such as, cylindrical shells with water loading, cylindrical shells in vacuo, plates with water loading, and plates in vacuo. The procedure for doing these four cases is given, with specific numerical examples present only for the cylindrical shell case.

The Past, Present, and Future of Image-Enhanced Endoscopy

PubMed Central

Jang, Jae-Young

2015-01-01

Despite the remarkable progress recently made to enhance the resolution of white-light endoscopy, detection, and diagnosis of premalignant lesions, such as adenomas and subtle early-stage cancers, remains a great challenge. As for example, although chromoendoscopy, such as endoscopy using indigo carmine, is useful for the early diagnosis of subtle lesions, the technique presents various disadvantages ranging from the time required for spray application of the dye and suctioning of excess dye to the increased difficulty in identifying lesions in the presence of severe inflammation and obstruction of visual field due to the pooling of solution in depressed-type lesions. To overcome these diagnostic problems associated with chromoendoscopy, research has focused on the development of endoscopes based on new optical technologies. Several types of image-enhanced endoscopy methods have recently been presented. In particular, image-enhanced endoscopy has emerged as a new paradigm for the diagnosis of gastrointestinal disorders. Image-enhanced endoscopes provide high-contrast images of lesions by means of optical or electronic technologies, including the contrast enhancement of the mucosal surface and of blood vessels. Chromoendoscopy, narrow-band imaging, i-SCAN, and flexible spectral imaging color enhancement are representative examples of image-enhanced endoscopy discussed in this paper. PMID:26668791

Agent-based model of fecal microbial transplant effect on bile acid metabolism on suppressing Clostridium difficile infection: an example of agent-based modeling of intestinal bacterial infection.

PubMed

Peer, Xavier; An, Gary

2014-10-01

Agent-based modeling is a computational modeling method that represents system-level behavior as arising from multiple interactions between the multiple components that make up a system. Biological systems are thus readily described using agent-based models (ABMs), as multi-cellular organisms can be viewed as populations of interacting cells, and microbial systems manifest as colonies of individual microbes. Intersections between these two domains underlie an increasing number of pathophysiological processes, and the intestinal tract represents one of the most significant locations for these inter-domain interactions, so much so that it can be considered an internal ecology of varying robustness and function. Intestinal infections represent significant disturbances of this internal ecology, and one of the most clinically relevant intestinal infections is Clostridium difficile infection (CDI). CDI is precipitated by the use of broad-spectrum antibiotics, involves the depletion of commensal microbiota, and alterations in bile acid composition in the intestinal lumen. We present an example ABM of CDI (the C. difficile Infection ABM, or CDIABM) to examine fundamental dynamics of the pathogenesis of CDI and its response to treatment with anti-CDI antibiotics and a newer treatment therapy, fecal microbial transplant. The CDIABM focuses on one specific mechanism of potential CDI suppression: commensal modulation of bile acid composition. Even given its abstraction, the CDIABM reproduces essential dynamics of CDI and its response to therapy, and identifies a paradoxical zone of behavior that provides insight into the role of intestinal nutritional status and the efficacy of anti-CDI therapies. It is hoped that this use case example of the CDIABM can demonstrate the usefulness of both agent-based modeling and the application of abstract functional representation as the biomedical community seeks to address the challenges of increasingly complex diseases with the goal of personalized medicine.

Agent-based model of Fecal Microbial Transplant effect on Bile Acid Metabolism on suppressing Clostridium difficile infection: an example of agent-based modeling of intestinal bacterial infection

PubMed Central

Peer, Xavier; An, Gary

2014-01-01

Agent-based modeling is a computational modeling method that represents system-level behavior as arising from multiple interactions between the multiple components that make up a system. Biological systems are thus readily described using agent-based models (ABMs), as multi-cellular organisms can be viewed as populations of interacting cells, and microbial systems manifest as colonies of individual microbes. Intersections between these two domains underlie an increasing number of pathophysiological processes, and the intestinal tract represents one of the most significant locations for these inter-domain interactions, so much so that it can be considered an internal ecology of varying robustness and function. Intestinal infections represent significant disturbances of this internal ecology, and one of the most clinically relevant intestinal infections is Clostridium difficile infection (CDI). CDI is precipitated by the use of broad-spectrum antibiotics, involves the depletion of commensal microbiota, and alterations in bile acid composition in the intestinal lumen. We present an example ABM of CDI (the Clostridium difficile Infection ABM, or CDIABM) to examine fundamental dynamics of the pathogenesis of CDI and its response to treatment with anti-CDI antibiotics and a newer treatment therapy, Fecal Microbial Transplant (FMT). The CDIABM focuses on one specific mechanism of potential CDI suppression: commensal modulation of bile acid composition. Even given its abstraction, the CDIABM reproduces essential dynamics of CDI and its response to therapy, and identifies a paradoxical zone of behavior that provides insight into the role of intestinal nutritional status and the efficacy of anti-CDI therapies. It is hoped that this use case example of the CDIABM can demonstrate the usefulness of both agent-based modeling and the application of abstract functional representation as the biomedical community seeks to address the challenges of increasingly complex diseases with the goal of personalized medicine. PMID:25168489

Annotation of rule-based models with formal semantics to enable creation, analysis, reuse and visualization.

PubMed

Misirli, Goksel; Cavaliere, Matteo; Waites, William; Pocock, Matthew; Madsen, Curtis; Gilfellon, Owen; Honorato-Zimmer, Ricardo; Zuliani, Paolo; Danos, Vincent; Wipat, Anil

2016-03-15

Biological systems are complex and challenging to model and therefore model reuse is highly desirable. To promote model reuse, models should include both information about the specifics of simulations and the underlying biology in the form of metadata. The availability of computationally tractable metadata is especially important for the effective automated interpretation and processing of models. Metadata are typically represented as machine-readable annotations which enhance programmatic access to information about models. Rule-based languages have emerged as a modelling framework to represent the complexity of biological systems. Annotation approaches have been widely used for reaction-based formalisms such as SBML. However, rule-based languages still lack a rich annotation framework to add semantic information, such as machine-readable descriptions, to the components of a model. We present an annotation framework and guidelines for annotating rule-based models, encoded in the commonly used Kappa and BioNetGen languages. We adapt widely adopted annotation approaches to rule-based models. We initially propose a syntax to store machine-readable annotations and describe a mapping between rule-based modelling entities, such as agents and rules, and their annotations. We then describe an ontology to both annotate these models and capture the information contained therein, and demonstrate annotating these models using examples. Finally, we present a proof of concept tool for extracting annotations from a model that can be queried and analyzed in a uniform way. The uniform representation of the annotations can be used to facilitate the creation, analysis, reuse and visualization of rule-based models. Although examples are given, using specific implementations the proposed techniques can be applied to rule-based models in general. The annotation ontology for rule-based models can be found at http://purl.org/rbm/rbmo The krdf tool and associated executable examples are available at http://purl.org/rbm/rbmo/krdf anil.wipat@newcastle.ac.uk or vdanos@inf.ed.ac.uk. © The Author 2015. Published by Oxford University Press.

Some examples of geomorphodiversity in Italy

NASA Astrophysics Data System (ADS)

Panizza, Mario

2014-05-01

The concept of geomorphodiversity (Panizza, 2009) is presented: "the critical and specific assessment of the geomorphological features of a territory, by comparing them in a way both extrinsic (comparison of the geomorphological characteristics with those from other territories) and intrinsic (comparison of the geomorphological characteristics with other areas within the territory itself) and taking into account the level of their scientific quality, the scale of investigation and the purpose of the research". A first example concerns the Dolomites: they have been included in the UNESCO World Heritage List because of their exceptional beauty and unique landscape, together with their scientific importance from the geological and geomorphological point of view. They are of international significance for geomorphodiversity, as the classic site for the development of mountains in dolomite limestone and present a wide range of landforms related to erosion, tectonics and glaciation. They represent a kind of high altitude, open air laboratory of geomorphological heritage of exceptional global value, among the most extraordinary and accessible in the world and ideal for researching, teaching, understanding and developing Earth Science theories. The second example concerns the Emilia-Romagna Apennines, candidate for enrolment in the List of European Geoparks: they show a multifaceted and complex image from the international and regional geomorphological (extrinsic and intrinsic geomorphodiversity) point of view and are an educational example for illustrating morphotectonic evolution, stratigraphic and sedimentological sequences and morpholithological peculiarities connected with gypsum karst and clay mass wasting phenomena. The third example concerns the Vesuvius, one of the National Italian Parks: it shows an extrinsic geomorphodiversity mainly referred to the type of eruptions, with some exemplary processes inserted in international volcanic nomenclature; it makes up an important geoheritage that can be considered a field laboratory for research on volcanic geomorphology. At a regional level, intrinsic geomorphodiversity includes typical examples ascribable to lahars, relief inversion and pseudo-karst morphology.

The Cognitive Costs of Context: The Effects of Concreteness and Immersiveness in Instructional Examples

PubMed Central

Day, Samuel B.; Motz, Benjamin A.; Goldstone, Robert L.

2015-01-01

Prior research has established that while the use of concrete, familiar examples can provide many important benefits for learning, it is also associated with some serious disadvantages, particularly in learners’ ability to recognize and transfer their knowledge to new analogous situations. However, it is not immediately clear whether this pattern would hold in real world educational contexts, in which the role of such examples in student engagement and ease of processing might be of enough importance to overshadow any potential negative impact. We conducted two experiments in which curriculum-relevant material was presented in natural classroom environments, first with college undergraduates and then with middle-school students. All students in each study received the same relevant content, but the degree of contextualization in these materials was varied between students. In both studies, we found that greater contextualization was associated with poorer transfer performance. We interpret these results as reflecting a greater degree of embeddedness for the knowledge acquired from richer, more concrete materials, such that the underlying principles are represented in a less abstract and generalizable form. PMID:26648905

Path-integral formalism for stochastic resetting: Exactly solved examples and shortcuts to confinement

NASA Astrophysics Data System (ADS)

Roldán, Édgar; Gupta, Shamik

2017-08-01

We study the dynamics of overdamped Brownian particles diffusing in conservative force fields and undergoing stochastic resetting to a given location at a generic space-dependent rate of resetting. We present a systematic approach involving path integrals and elements of renewal theory that allows us to derive analytical expressions for a variety of statistics of the dynamics such as (i) the propagator prior to first reset, (ii) the distribution of the first-reset time, and (iii) the spatial distribution of the particle at long times. We apply our approach to several representative and hitherto unexplored examples of resetting dynamics. A particularly interesting example for which we find analytical expressions for the statistics of resetting is that of a Brownian particle trapped in a harmonic potential with a rate of resetting that depends on the instantaneous energy of the particle. We find that using energy-dependent resetting processes is more effective in achieving spatial confinement of Brownian particles on a faster time scale than performing quenches of parameters of the harmonic potential.

Upslope deposition of extremely distal turbidites: an example from the Tiburon Rise, west-central Atlantic

USGS Publications Warehouse

Dolan, J.; Beck, C.; Ogawa, Y.

1989-01-01

These terrigenous silt and sand turbidities represent an unprecedented example of upslope turbidite deposition in an extremely distral setting. Flow thickness was the dominant control on deposition of these beds, rather than true upslope flow. -from Authors

Vortices and the related principles of hydrodynamics

NASA Technical Reports Server (NTRS)

Betz, A

1921-01-01

Here, conceptions concerning vortices are illustrated by the simplest possible examples. Mathematical formulas and similar means of presentation, which, for the most part, do not help the understanding of persons not versed therein, have been avoided as much as possible. Instead, the author has endeavored to demonstrate the phenomena by means of simple geometrical and mechanical illustrations. For the sake of clarity, the author chiefly considers currents in one plane only, a situation that can be readily represented by diagrams. Some of the peculiarities of vortices in three dimensional flow are briefly discussed.

Biophysical EPR Studies Applied to Membrane Proteins

PubMed Central

Sahu, Indra D; Lorigan, Gary A

2015-01-01

Membrane proteins are very important in controlling bioenergetics, functional activity, and initializing signal pathways in a wide variety of complicated biological systems. They also represent approximately 50% of the potential drug targets. EPR spectroscopy is a very popular and powerful biophysical tool that is used to study the structural and dynamic properties of membrane proteins. In this article, a basic overview of the most commonly used EPR techniques and examples of recent applications to answer pertinent structural and dynamic related questions on membrane protein systems will be presented. PMID:26855825

Geometric subspace methods and time-delay embedding for EEG artifact removal and classification.

PubMed

Anderson, Charles W; Knight, James N; O'Connor, Tim; Kirby, Michael J; Sokolov, Artem

2006-06-01

Generalized singular-value decomposition is used to separate multichannel electroencephalogram (EEG) into components found by optimizing a signal-to-noise quotient. These components are used to filter out artifacts. Short-time principal components analysis of time-delay embedded EEG is used to represent windowed EEG data to classify EEG according to which mental task is being performed. Examples are presented of the filtering of various artifacts and results are shown of classification of EEG from five mental tasks using committees of decision trees.

Legendre-tau approximations for functional differential equations

NASA Technical Reports Server (NTRS)

Ito, K.; Teglas, R.

1986-01-01

The numerical approximation of solutions to linear retarded functional differential equations are considered using the so-called Legendre-tau method. The functional differential equation is first reformulated as a partial differential equation with a nonlocal boundary condition involving time-differentiation. The approximate solution is then represented as a truncated Legendre series with time-varying coefficients which satisfy a certain system of ordinary differential equations. The method is very easy to code and yields very accurate approximations. Convergence is established, various numerical examples are presented, and comparison between the latter and cubic spline approximation is made.

Transforming Child and Youth Mental Health Care via Innovative Technological Solutions.

PubMed

Pepler, Antonio; Boydell, Katherine M; Teshima, John; Volpe, Tiziana; Braunberger, Peter G; Minden, Debbie

2011-01-01

Live interactive videoconferencing and other technologies offer innovative opportunities for effective delivery of specialized child and adolescent mental health services. In this article, an example of a comprehensive telepsychiatry program is presented to highlight a variety of capacity-building initiatives that are responsive to community needs and cultures; these initiatives are allowing children, youth and caregivers to access otherwise-distant specialist services within their home communities. Committed, enthusiastic champions, adequate funding and infrastructure, creativity and a positive attitude represent key elements in the adaptation of this demonstrated user-friendly modality.

An inquiry into computer understanding

NASA Technical Reports Server (NTRS)

Cheeseman, Peter

1988-01-01

The paper examines issues connected with the choice of the best method for representing and reasoning about common sense. McDermott (1978) has shown that a direct translation of common sense reasoning into logical form leads to insurmountable difficulties. It is shown, in the present work, that if Bayesian probability is used instead of logic as the language of such reasoning, none of the technical difficulties found in using logic arise. Bayesian inference is applied to a simple example of linguistic information to illustrate the potential of this type of inference for artificial intelligence.

Analysis of Panel Data

NASA Astrophysics Data System (ADS)

Hsiao, Cheng

2003-02-01

Panel data models have become increasingly popular among applied researchers due to their heightened capacity for capturing the complexity of human behavior, as compared to cross-sectional or time series data models. This second edition represents a substantial revision of the highly successful first edition (1986). Recent advances in panel data research are presented in an accessible manner and are carefully integrated with the older material. The thorough discussion of theory and the judicious use of empirical examples make this book useful to graduate students and advanced researchers in economics, business, sociology and political science.

On Animating 2D Velocity Fields

NASA Technical Reports Server (NTRS)

Kao, David; Pang, Alex; Yan, Jerry (Technical Monitor)

2001-01-01

A velocity field, even one that represents a steady state flow, implies a dynamical system. Animated velocity fields is an important tool in understanding such complex phenomena. This paper looks at a number of techniques that animate velocity fields and propose two new alternatives. These are texture advection and streamline cycling. The common theme among these techniques is the use of advection on some texture to generate a realistic animation of the velocity field. Texture synthesis and selection for these methods are presented. Strengths and weaknesses of the techniques are also discussed in conjunctions with several examples.

On Animating 2D Velocity Fields

NASA Technical Reports Server (NTRS)

Kao, David; Pang, Alex

2000-01-01

A velocity field. even one that represents a steady state flow implies a dynamical system. Animated velocity fields is an important tool in understanding such complex phenomena. This paper looks at a number of techniques that animate velocity fields and propose two new alternatives, These are texture advection and streamline cycling. The common theme among these techniques is the use of advection on some texture to generate a realistic animation of the velocity field. Texture synthesis and selection for these methods are presented. Strengths and weaknesses of the techniques are also discussed in conjunction with several examples.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keepin, G.R.

Over the years the Los Alamos safeguards program has developed, tested, and implemented a broad range of passive and active nondestructive analysis (NDA) instruments (based on gamma and x-ray detection and neutron counting) that are now widely employed in safeguarding nuclear materials of all forms. Here very briefly, the major categories of gamma ray and neutron based NDA techniques, give some representative examples of NDA instruments currently in use, and cite a few notable instances of state-of-the-art NDA technique development. Historical aspects and a broad overview of the safeguards program are also presented.

A building block for hardware belief networks.

PubMed

Behin-Aein, Behtash; Diep, Vinh; Datta, Supriyo

2016-07-21

Belief networks represent a powerful approach to problems involving probabilistic inference, but much of the work in this area is software based utilizing standard deterministic hardware based on the transistor which provides the gain and directionality needed to interconnect billions of them into useful networks. This paper proposes a transistor like device that could provide an analogous building block for probabilistic networks. We present two proof-of-concept examples of belief networks, one reciprocal and one non-reciprocal, implemented using the proposed device which is simulated using experimentally benchmarked models.

Relations between structural and dynamic thermal characteristics of building walls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kossecka, E.; Kosny, J.

1996-10-01

The effect of internal thermal structure on dynamic characteristics of walls is analyzed. The concept of structure factors is introduced and the conditions they impose on response factors are given. Simple examples of multilayer walls, representing different types of thermal resistance and capacity distribution, are analyzed to illustrate general relations between structure factors and response factors. The idea of the ``thermally equivalent wall``, a plane multilayer structure, with dynamic characteristics similar to those of a complex structure, in which three-dimensional heat flow occurs, is presented.

The emerging impact of genomics on the development of biological weapons. Threats and benefits posed by engineered extremophiles.

PubMed

Daly, M J

2001-09-01

During the past decades, representatives of Archaea, Bacteria, and Protista have been found thriving in many newly discovered extremely hostile habitats, which hitherto were regarded as too harsh to harbor life. To illustrate how an extremophile could be targeted for development as a biowarfare agent, an example is presented describing current advances in engineering Deinococcus radiodurans. Using a generally applicable combination of conventional genetic engineering and genomic informatics, this extremely radiation-resistant and environmentally robust bacterium is being developed for biotechnology.

A teaching phantom for sonographers.

PubMed

Zagzebski, J A; Madsen, E L; Frank, G R

1991-01-01

An anthropomorphic torso section phantom is described that is intended for use during initial stages of ultrasonographer training. The phantom represents a section of the upper abdomen, with simulated ribs, liver, kidney with fat pad, gallbladder, aorta, and bowel gas. Positioned in the liver are ten simulated soft tissue masses, which produce a variety of typical echographic patterns. All simulated soft tissue components are formed of tissue-mimicking materials that match their corresponding tissue counterparts in terms of speed of sound, ultrasonic attenuation, and density. Construction details are presented and examples of images are shown.

Conceptual design study of a visual system for a rotorcraft simulator and some advances in platform motion utilization

NASA Technical Reports Server (NTRS)

Sinacori, J. B.

1980-01-01

A conceptual design of a visual system for a rotorcraft flight simulator is presented. Also, drive logic elements for a coupled motion base for such a simulator are given. The design is the result of an assessment of many potential arrangements of electro-optical elements and is a concept considered feasible for the application. The motion drive elements represent an example logic for a coupled motion base and is essentially an appeal to the designers of such logic to combine their washout and braking functions.

Legendre-Tau approximations for functional differential equations

NASA Technical Reports Server (NTRS)

Ito, K.; Teglas, R.

1983-01-01

The numerical approximation of solutions to linear functional differential equations are considered using the so called Legendre tau method. The functional differential equation is first reformulated as a partial differential equation with a nonlocal boundary condition involving time differentiation. The approximate solution is then represented as a truncated Legendre series with time varying coefficients which satisfy a certain system of ordinary differential equations. The method is very easy to code and yields very accurate approximations. Convergence is established, various numerical examples are presented, and comparison between the latter and cubic spline approximations is made.

Altered States of Consciousness

PubMed Central

Butts, June Dobbs

1978-01-01

Medicine, sex, and religion are presented as related areas of human thought and behavior in which people traditionally have sought temporary release from daily living. In essence, these areas represent a search for altered states of consciousness. The harmful way is through drug addiction. Five common characteristics are cited for the three areas. Examples of their universality are traceable by their omnipresence and their appearance in most childhood games—especially those taking on sexual nuances—which are usually hidden from adults. If Eastern knowledge and control of bodily processes were geared to Western technology, mankind would benefit. PMID:712866

European Geophysical Society (23rd) General Assembly, Annales Geophysicae. Part 2. Hydrology, Oceans & Atmosphere, Supplement 2 to Volume 16 Held in Nice, France on 20-24 April 1998

DTIC Science & Technology

1998-01-01

sand and gravel outcrops - led to a database of hydraulic conductivities, porosities and kinetic parameters for each lithologjcal fades present in...sedimentological methods. The resulting 2D high-resolution data sets represent a veiy detailed database of excellent quality. On the basis of one example...from an outcrop in southwest Germany the process of building up the database is explained and the results of modelling of transport kinetics in such

Disruptive technology disorder: A past, present, and future neurologic syndrome.

PubMed

Weaver, Donald F

2017-07-25

Based upon an analysis of 6 major historical technological advances over the last 150 years, a new syndrome, disruptive technology disorder (DTD), is introduced. DTD describes the human health ailments that accompany the implementation of disruptive technologies. Elevator sickness, railway spine, and bicycle face are representative examples. Though the underlying causative disruptive technologies may differ, many neurologic symptoms (headache, dizziness, weakness) are common to multiple DTDs. Born of technology-driven societal change, DTDs manifest as a complex interplay between biological and psychological symptoms. © 2017 American Academy of Neurology.

Tunnelling in Dante's Inferno

DOE Office of Scientific and Technical Information (OSTI.GOV)

Furuuchi, Kazuyuki; Sperling, Marcus, E-mail: kazuyuki.furuuchi@manipal.edu, E-mail: marcus.sperling@univie.ac.at

2017-05-01

We study quantum tunnelling in Dante's Inferno model of large field inflation. Such a tunnelling process, which will terminate inflation, becomes problematic if the tunnelling rate is rapid compared to the Hubble time scale at the time of inflation. Consequently, we constrain the parameter space of Dante's Inferno model by demanding a suppressed tunnelling rate during inflation. The constraints are derived and explicit numerical bounds are provided for representative examples. Our considerations are at the level of an effective field theory; hence, the presented constraints have to hold regardless of any UV completion.

Effects of incomplete adaption and disturbance in adaptive control

NASA Technical Reports Server (NTRS)

Lindorff, D. P.

1972-01-01

This investigation focused attention on the fact that the synthesis of adaptive control systems has often been discussed in the framework of idealizations which may represent over simplifications. A condition for boundedness of the tracking error has been derived for the case in which incomplete adaption and disturbance are present. When using Parks' design it is shown that instability of the adaptive gains can result due to the presence of disturbance. The theory has been applied to a nontrivial example in order to illustrate the concepts involved.

Modeling of Microstructure Evolution During Alloy Solidification

NASA Astrophysics Data System (ADS)

Zhu, Mingfang; Pan, Shiyan; Sun, Dongke

In recent years, considerable advances have been achieved in the numerical modeling of microstructure evolution during solidification. This paper presents the models based on the cellular automaton (CA) technique and lattice Boltzmann method (LBM), which can reproduce a wide variety of solidification microstructure features observed experimentally with an acceptable computational efficiency. The capabilities of the models are addressed by presenting representative examples encompassing a broad variety of issues, such as the evolution of dendritic structure and microsegregation in two and three dimensions, dendritic growth in the presence of convection, divorced eutectic solidification of spheroidal graphite irons, and gas porosity formation. The simulations offer insights into the underlying physics of microstructure formation during alloy solidification.

Numerical techniques in radiative heat transfer for general, scattering, plane-parallel media

NASA Technical Reports Server (NTRS)

Sharma, A.; Cogley, A. C.

1982-01-01

The study of radiative heat transfer with scattering usually leads to the solution of singular Fredholm integral equations. The present paper presents an accurate and efficient numerical method to solve certain integral equations that govern radiative equilibrium problems in plane-parallel geometry for both grey and nongrey, anisotropically scattering media. In particular, the nongrey problem is represented by a spectral integral of a system of nonlinear integral equations in space, which has not been solved previously. The numerical technique is constructed to handle this unique nongrey governing equation as well as the difficulties caused by singular kernels. Example problems are solved and the method's accuracy and computational speed are analyzed.

Two-character motion analysis and synthesis.

PubMed

Kwon, Taesoo; Cho, Young-Sang; Park, Sang Il; Shin, Sung Yong

2008-01-01

In this paper, we deal with the problem of synthesizing novel motions of standing-up martial arts such as Kickboxing, Karate, and Taekwondo performed by a pair of human-like characters while reflecting their interactions. Adopting an example-based paradigm, we address three non-trivial issues embedded in this problem: motion modeling, interaction modeling, and motion synthesis. For the first issue, we present a semi-automatic motion labeling scheme based on force-based motion segmentation and learning-based action classification. We also construct a pair of motion transition graphs each of which represents an individual motion stream. For the second issue, we propose a scheme for capturing the interactions between two players. A dynamic Bayesian network is adopted to build a motion transition model on top of the coupled motion transition graph that is constructed from an example motion stream. For the last issue, we provide a scheme for synthesizing a novel sequence of coupled motions, guided by the motion transition model. Although the focus of the present work is on martial arts, we believe that the framework of the proposed approach can be conveyed to other two-player motions as well.

Integrated river basin management, ICT and DSS: Challenges and needs

NASA Astrophysics Data System (ADS)

Gourbesville, Philippe

River basin management is a complex task. Therefore, instruments that help to assess the present situation and assist in the development and evaluation of solutions may be important. Since several decades and after the implementation of the first compulsory legal environments and institutional organizations for IWRM and IRBM, the need for an efficient support in the different decision-making processes has emerged. After several experiences, the demonstration of the interest of ICT and DSS systems is obvious in the water resources management domain. However and until now, most of the efforts have been focused on the theoretical aspects with very few integrations into operational approaches. The implementation of the new European water framework directive (2000) represents today one key example from which some lessons can be learned in the way of definition and use of ICT and DSS systems for IWRM and IRBM. The paper presents the concepts available through ICT and DSS. The example of the WFD is used to underline the challenges and the difficulties for the elaboration of new tools - DSSs - which could be able to answer of the challenges of IWRM and IRBM.

26 CFR 31.3211-2 - Rates and computation of employee representative tax.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Rates—(1)(i) Tier 1 tax. The Tier 1 employee representative tax rate equals the sum of the tax rates in... employer tax for hospital insurance. The Tier 1 employee representative tax rate is applied to compensation... Insurance Contributions Act. (ii) Example. The rule in paragraph (a)(1)(i) of this section is illustrated by...

Experimental and statistical post-validation of positive example EST sequences carrying peroxisome targeting signals type 1 (PTS1)

PubMed Central

Lingner, Thomas; Kataya, Amr R. A.; Reumann, Sigrun

2012-01-01

We recently developed the first algorithms specifically for plants to predict proteins carrying peroxisome targeting signals type 1 (PTS1) from genome sequences.1 As validated experimentally, the prediction methods are able to correctly predict unknown peroxisomal Arabidopsis proteins and to infer novel PTS1 tripeptides. The high prediction performance is primarily determined by the large number and sequence diversity of the underlying positive example sequences, which mainly derived from EST databases. However, a few constructs remained cytosolic in experimental validation studies, indicating sequencing errors in some ESTs. To identify erroneous sequences, we validated subcellular targeting of additional positive example sequences in the present study. Moreover, we analyzed the distribution of prediction scores separately for each orthologous group of PTS1 proteins, which generally resembled normal distributions with group-specific mean values. The cytosolic sequences commonly represented outliers of low prediction scores and were located at the very tail of a fitted normal distribution. Three statistical methods for identifying outliers were compared in terms of sensitivity and specificity.” Their combined application allows elimination of erroneous ESTs from positive example data sets. This new post-validation method will further improve the prediction accuracy of both PTS1 and PTS2 protein prediction models for plants, fungi, and mammals. PMID:22415050

Analyzing the acoustic beat with mobile devices

NASA Astrophysics Data System (ADS)

Kuhn, Jochen; Vogt, Patrik; Hirth, Michael

2014-04-01

In this column, we have previously presented various examples of how physical relationships can be examined by analyzing acoustic signals using smartphones or tablet PCs. In this example, we will be exploring the acoustic phenomenon of small beats, which is produced by the overlapping of two tones with a low difference in frequency Δf. The resulting auditory sensation is a tone with a volume that varies periodically. Acoustic beats can be perceived repeatedly in day-to-day life and have some interesting applications. For example, string instruments are still tuned with the help of an acoustic beat, even with modern technology. If a reference tone (e.g., 440 Hz) and, for example, a slightly out-of-tune violin string produce a tone simultaneously, a beat can be perceived. The more similar the frequencies, the longer the duration of the beat. In the extreme case, when the frequencies are identical, a beat no longer arises. The string is therefore correctly tuned. Using the Oscilloscope app,4 it is possible to capture and save acoustic signals of this kind and determine the beat frequency fS of the signal, which represents the difference in frequency Δf of the two overlapping tones (for Android smartphones, the app OsciPrime Oscilloscope can be used).

Experimental and statistical post-validation of positive example EST sequences carrying peroxisome targeting signals type 1 (PTS1).

PubMed

Lingner, Thomas; Kataya, Amr R A; Reumann, Sigrun

2012-02-01

We recently developed the first algorithms specifically for plants to predict proteins carrying peroxisome targeting signals type 1 (PTS1) from genome sequences. As validated experimentally, the prediction methods are able to correctly predict unknown peroxisomal Arabidopsis proteins and to infer novel PTS1 tripeptides. The high prediction performance is primarily determined by the large number and sequence diversity of the underlying positive example sequences, which mainly derived from EST databases. However, a few constructs remained cytosolic in experimental validation studies, indicating sequencing errors in some ESTs. To identify erroneous sequences, we validated subcellular targeting of additional positive example sequences in the present study. Moreover, we analyzed the distribution of prediction scores separately for each orthologous group of PTS1 proteins, which generally resembled normal distributions with group-specific mean values. The cytosolic sequences commonly represented outliers of low prediction scores and were located at the very tail of a fitted normal distribution. Three statistical methods for identifying outliers were compared in terms of sensitivity and specificity." Their combined application allows elimination of erroneous ESTs from positive example data sets. This new post-validation method will further improve the prediction accuracy of both PTS1 and PTS2 protein prediction models for plants, fungi, and mammals.

How Effective Is Example Generation for Learning Declarative Concepts?

ERIC Educational Resources Information Center

Rawson, Katherine A.; Dunlosky, John

2016-01-01

Declarative concepts (i.e., key terms and corresponding definitions for abstract concepts) represent foundational knowledge that students learn in many content domains. Thus, investigating techniques to enhance concept learning is of critical importance. Various theoretical accounts support the expectation that example generation will serve this…

Severe dysphagia as the presenting symptom of Wernicke-Korsakoff syndrome in a non-alcoholic man.

PubMed

Karaiskos, Ilias; Katsarolis, Ioannis; Stefanis, Leonidas

2008-02-01

We present the case of a non-alcoholic man, who, following severe malnutrition, presented with dysphagia that necessitated gastrostomy tube placement. The patient subsequently developed encephalopathy, at which point thiamine deficiency was suspected and thiamine supplementation initiated. The encephalopathy and the dysphagia resolved, but the patient was left with a dense amnestic deficit consistent with Korsakoff syndrome. MRI at the time of the encephalopathy revealed lesions consistent with Wernicke-Korsakoff syndrome. This case represents a remarkable example of Wernicke-Korsakoff syndrome that for a prolonged time period had as its sole manifestation severe dysphagia. To our knowledge, there is only one similar case reported in the literature. This case serves to alert neurologists that isolated dysphagia may be the presenting symptom of this classic neurological syndrome even in the absence of alcoholism.

Methods of editing cloud and atmospheric layer affected pixels from satellite data

NASA Technical Reports Server (NTRS)

Nixon, P. R. (Principal Investigator); Wiegand, C. L.; Richardson, A. J.; Johnson, M. P.

1982-01-01

Practical methods of computer screening cloud-contaminated pixels from data of various satellite systems are proposed. Examples are given of the location of clouds and representative landscape features in HCMM spectral space of reflectance (VIS) vs emission (IR). Methods of screening out cloud affected HCMM are discussed. The character of subvisible absorbing-emitting atmospheric layers (subvisible cirrus or SCi) in HCMM data is considered and radiosonde soundings are examined in relation to the presence of SCi. The statistical characteristics of multispectral meteorological satellite data in clear and SCi affected areas are discussed. Examples in TIROS-N and NOAA-7 data from several states and Mexico are presented. The VIS-IR cluster screening method for removing clouds is applied to a 262, 144 pixel HCMM scene from south Texas and northeast Mexico. The SCi that remain after cluster screening are sited out by applying a statistically determined IR limit.

Piecewise Polynomial Aggregation as Preprocessing for Data Numerical Modeling

NASA Astrophysics Data System (ADS)

Dobronets, B. S.; Popova, O. A.

2018-05-01

Data aggregation issues for numerical modeling are reviewed in the present study. The authors discuss data aggregation procedures as preprocessing for subsequent numerical modeling. To calculate the data aggregation, the authors propose using numerical probabilistic analysis (NPA). An important feature of this study is how the authors represent the aggregated data. The study shows that the offered approach to data aggregation can be interpreted as the frequency distribution of a variable. To study its properties, the density function is used. For this purpose, the authors propose using the piecewise polynomial models. A suitable example of such approach is the spline. The authors show that their approach to data aggregation allows reducing the level of data uncertainty and significantly increasing the efficiency of numerical calculations. To demonstrate the degree of the correspondence of the proposed methods to reality, the authors developed a theoretical framework and considered numerical examples devoted to time series aggregation.

On the characteristics of landslide tsunamis

PubMed Central

Løvholt, F.; Pedersen, G.; Harbitz, C. B.; Glimsdal, S.; Kim, J.

2015-01-01

This review presents modelling techniques and processes that govern landslide tsunami generation, with emphasis on tsunamis induced by fully submerged landslides. The analysis focuses on a set of representative examples in simplified geometries demonstrating the main kinematic landslide parameters influencing initial tsunami amplitudes and wavelengths. Scaling relations from laboratory experiments for subaerial landslide tsunamis are also briefly reviewed. It is found that the landslide acceleration determines the initial tsunami elevation for translational landslides, while the landslide velocity is more important for impulsive events such as rapid slumps and subaerial landslides. Retrogressive effects stretch the tsunami, and in certain cases produce enlarged amplitudes due to positive interference. In an example involving a deformable landslide, it is found that the landslide deformation has only a weak influence on tsunamigenesis. However, more research is needed to determine how landslide flow processes that involve strong deformation and long run-out determine tsunami generation. PMID:26392615

Remote Control of Cellular Functions: The Role of Smart Nanomaterials in the Medicine of the Future.

PubMed

Genchi, Giada Graziana; Marino, Attilio; Grillone, Agostina; Pezzini, Ilaria; Ciofani, Gianni

2017-05-01

The remote control of cellular functions through smart nanomaterials represents a biomanipulation approach with unprecedented potential applications in many fields of medicine, ranging from cancer therapy to tissue engineering. By actively responding to external stimuli, smart nanomaterials act as real nanotransducers able to mediate and/or convert different forms of energy into both physical and chemical cues, fostering specific cell behaviors. This report describes those classes of nanomaterials that have mostly paved the way to a "wireless" control of biological phenomena, focusing the discussion on some examples close to the clinical practice. In particular, magnetic fields, light irradiation, ultrasound, and pH will be presented as means to manipulate the cellular fate, due to the peculiar physical/chemical properties of some smart nanoparticles, thus providing realistic examples of "nanorobots" approaching the visionary ideas of Richard Feynman. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hadgu, Teklu; Matteo, Edward N.

An example case is presented for testing analytical thermal models. The example case represents thermal analysis of a generic repository in bedded salt at 500 m depth. The analysis is part of the study reported in Matteo et al. (2016). Ambient average ground surface temperature of 15°C, and a natural geothermal gradient of 25°C/km, were assumed to calculate temperature at the near field. For generic salt repository concept crushed salt backfill is assumed. For the semi-analytical analysis crushed salt thermal conductivity of 0.57 W/m-K was used. With time the crushed salt is expected to consolidate into intact salt. In thismore » study a backfill thermal conductivity of 3.2 W/m-K (same as intact) is used for sensitivity analysis. Decay heat data for SRS glass is given in Table 1. The rest of the parameter values are shown below. Results of peak temperatures at the waste package surface are given in Table 2.« less

On the characteristics of landslide tsunamis.

PubMed

Løvholt, F; Pedersen, G; Harbitz, C B; Glimsdal, S; Kim, J

2015-10-28

This review presents modelling techniques and processes that govern landslide tsunami generation, with emphasis on tsunamis induced by fully submerged landslides. The analysis focuses on a set of representative examples in simplified geometries demonstrating the main kinematic landslide parameters influencing initial tsunami amplitudes and wavelengths. Scaling relations from laboratory experiments for subaerial landslide tsunamis are also briefly reviewed. It is found that the landslide acceleration determines the initial tsunami elevation for translational landslides, while the landslide velocity is more important for impulsive events such as rapid slumps and subaerial landslides. Retrogressive effects stretch the tsunami, and in certain cases produce enlarged amplitudes due to positive interference. In an example involving a deformable landslide, it is found that the landslide deformation has only a weak influence on tsunamigenesis. However, more research is needed to determine how landslide flow processes that involve strong deformation and long run-out determine tsunami generation. © 2015 The Authors.

Karst flash floods: an example from the Dinaric karst (Croatia)

NASA Astrophysics Data System (ADS)

Bonacci, O.; Ljubenkov, I.; Roje-Bonacci, T.

2006-03-01

Flash floods constitute one of the deadliest and costliest natural disasters worldwide. This paper explains the karst flash flood phenomenon, which represents a special kind of flash flood. As the majority of flash floods karst flash floods are caused by intensive short-term precipitation in an area whose surface rarely exceeds a few square kilometres. The characteristics of all flash floods are their short duration, small areal extent, high flood peaks and rapid flows, and heavy loss of life and property. Karst flash floods have specific characteristics due to special conditions for water circulation, which exist in karst terrains. During karst flash floods a sudden rise of groundwater levels occurs, which causes the appearance of numerous, unexpected, abundant and temporary karst springs. This paper presents in detail an example of a karst flash flood in the Marina bay (Dinaric karst region of Croatia), which occurred in December 2004.

Randomized interpolative decomposition of separated representations

NASA Astrophysics Data System (ADS)

Biagioni, David J.; Beylkin, Daniel; Beylkin, Gregory

2015-01-01

We introduce an algorithm to compute tensor interpolative decomposition (dubbed CTD-ID) for the reduction of the separation rank of Canonical Tensor Decompositions (CTDs). Tensor ID selects, for a user-defined accuracy ɛ, a near optimal subset of terms of a CTD to represent the remaining terms via a linear combination of the selected terms. CTD-ID can be used as an alternative to or in combination with the Alternating Least Squares (ALS) algorithm. We present examples of its use within a convergent iteration to compute inverse operators in high dimensions. We also briefly discuss the spectral norm as a computational alternative to the Frobenius norm in estimating approximation errors of tensor ID. We reduce the problem of finding tensor IDs to that of constructing interpolative decompositions of certain matrices. These matrices are generated via randomized projection of the terms of the given tensor. We provide cost estimates and several examples of the new approach to the reduction of separation rank.

Reliability of the term 'support' in singing.

PubMed

Sand, Susanne; Sundberg, Johan

2005-01-01

The usefulness of a term depends on the extent to which it means the same thing to different people. In this investigation we examine the term 'support', commonly used in vocal pedagogy. Singing lessons given by co-author SS to five students at varying stages were recorded on DAT. By listening to these recordings, she selected 42 examples, each a few seconds long, that she found representative of different degrees of support ranging from perfect to nil. These examples were presented in random order to nine experts, all with a professional involvement in singing. Thirteen of the stimuli occurred twice in the test. Intra- and inter-rater reliability were found to be high, Cronbach alpha=0.910, and mean correlation 0.743 (SD 0.137). These data support the assumption that the term support has a similar meaning to voice experts and should thus be useful in voice terminology.

Simulation of drive of mechanisms, working in specific conditions

NASA Astrophysics Data System (ADS)

Ivanovskaya, A. V.; Rybak, A. T.

2018-05-01

This paper presents a method for determining the dynamic loads on the lifting actuator device other than the conventional methods, for example, ship windlass. For such devices, the operation of their drives is typical under special conditions: different environments, the influence of hydrometeorological factors, a high level of vibration, variability of loading, etc. Hoisting devices working in such conditions are not considered in the standard; however, relevant studies concern permissible parameters of the drive devices of this kind. As an example, the article studied the work deck lifting devices - windlass. To construct a model, the windlass is represented by a rod of the variable cross-section. As a result, a mathematical model of the longitudinal oscillations of such rod is obtained. Analytic dependencies have also been obtained to determine the natural frequencies of the lowest forms of oscillations, which are necessary and are the basis for evaluating the parameters of operation of this type of the device.

Juggling the life-puzzle with Geosciences: personal experience and strategies from a female leader

NASA Astrophysics Data System (ADS)

Arheimer, Berit

2017-04-01

People are very complex and difficult to categorize. For instance, in the Geosciences community I am representing both minorities and majorities. When being in minority, I am both Underrepresented and Overrepresented by the composition of this community vs the global population, and also at EGU I am both under- and over-represented vs the total geoscience community. At present, I am underrepresented being a Woman in Geosciences but earlier in my carrier, I was also underrepresented being a Young Leader - so I will focus my presentation on both gender and age, as it is difficult for me to separate these two barriers from various sorts of exclusions I experienced. Underrepresentation is bad for several reasons, for instance (i) We might miss talents if equality of opportunities are not given in geosciences; (ii) Teams work less efficient than if they are composed by different characters, competences and skills; (iii) We are less prepared for new circumstances in this rapidly changing and unstable world; (iv) We degrade in communication skills and perception, if we don't understand similarities and differences. I will discuss some representative differences that may lead to unequal opportunities in geosciences. However, we need to be careful when searching for representation as it involves attribution of characteristics, which may lead to stigmatization and oversimplify the complexity of personality. Differences between individuals in a population are still much larger than between the averages of the populations. In my presentation I will give examples from my personal experience of barriers during 25 years in geosciences and the strategies I have used to overcome them. I will also give examples of successful methods that I have used in my 17 years of leadership when building efficient teams, to make them benefit from differences between individuals. I am currently leading a group of 26 scientists with origin from 13 countries world-wide. Finally, I will give some recommendations from being a single-mother with scientific and international ambitions, working in an operational environment, on how to juggle the dynamic life puzzle.

Identification of P/S-wave successions for application in microseismicity

NASA Astrophysics Data System (ADS)

Deflandre, J.-P.; Dubesset, M.

1992-09-01

Interpretation of P/S-wave successions is used in induced or passive microseismicity. It makes the location of microseismic events possible when the triangulation technique cannot be used. To improve the reliability of the method, we propose a technique that identifies the P/S-wave successions among recorded wave successions. A polarization software is used to verify the orthogonality between the P and S polarization axes. The polarization parameters are computed all along the 3-component acoustic signal. Then the algorithm detects time windows within which the signal polarization axis is perpendicular to the polarization axis of the wave in the reference time window (representative of the P wave). The technique is demonstrated for a synthetic event, and three application cases are presented. The first one corresponds to a calibration shot within which the arrivals of perpendicularly polarized waves are correctly detected in spite of their moderate amplitude. The second example presents a microseismic event recorded during gas withdrawal from an underground gas storage reservoir. The last example is chosen as a counter-example, concerning a microseismic event recorded during a hydraulic fracturing job. The detection algorithm reveals that, in this case, the wave succession does not correspond to a P/S one. This implies that such an event must not be located by the method based on the interpretation of a P/S-wave succession as no such a succession is confirmed.

Applications of Artificial Neural Networks in Structural Engineering with Emphasis on Continuum Models

NASA Technical Reports Server (NTRS)

Kapania, Rakesh K.; Liu, Youhua

1998-01-01

The use of continuum models for the analysis of discrete built-up complex aerospace structures is an attractive idea especially at the conceptual and preliminary design stages. But the diversity of available continuum models and hard-to-use qualities of these models have prevented them from finding wide applications. In this regard, Artificial Neural Networks (ANN or NN) may have a great potential as these networks are universal approximators that can realize any continuous mapping, and can provide general mechanisms for building models from data whose input-output relationship can be highly nonlinear. The ultimate aim of the present work is to be able to build high fidelity continuum models for complex aerospace structures using the ANN. As a first step, the concepts and features of ANN are familiarized through the MATLAB NN Toolbox by simulating some representative mapping examples, including some problems in structural engineering. Then some further aspects and lessons learned about the NN training are discussed, including the performances of Feed-Forward and Radial Basis Function NN when dealing with noise-polluted data and the technique of cross-validation. Finally, as an example of using NN in continuum models, a lattice structure with repeating cells is represented by a continuum beam whose properties are provided by neural networks.

Dawnside Variability of Magnetic Field in High Latitude Regions of Saturn's Magnetosphere

NASA Astrophysics Data System (ADS)

Davies, E. H.; Masters, A.; Dougherty, M. K.; Sergis, N.

2017-12-01

Magnetic field lines at high latitudes in Saturn's post dawn sector tend to exhibit a swept-back configuration with respect to the direction of planetary rotation. This is a result of equatorial mass loading (mostly from the moon Enceladus) and the inability of planet to accelerate this plasma to co-rotation velocities, owing to plasma sinks in the system and the finite conductivity of the ionosphere. Results of a survey of high latitude magnetic field measurements within the dawn-noon sector from the Magnetometer Instrument (MAG) on the Cassini Spacecraft are presented. Data from 2004 to 2016 are used, representing almost the entire duration of the mission. 39 examples of field lines deviating in the direction of planetary rotation from their default configuration of sweep-back are found. These deviations represent the field sweeping forward towards a co-rotating (or occasionally super co-rotating) configuration, and occur transiently, on a timescale of hours. An analysis of these events, using data from the Magnetospheric Imaging Instrument (MIMI) is carried out. Several of the perturbed field events are found to correspond with the detection of high energy (on the order of 100 keV) electrons local to the spacecraft. It is suggested that these events are examples of return flow from magnetotail reconnection.

Partonomies for interactive explorable 3D-models of anatomy.

PubMed

Schubert, R; Höhne, K H

1998-01-01

We introduce a concept to model subtle part-whole-semantics for the use with interactive 3d-models of human anatomy. Similar to experiences with modeling partonomies for physical artifacts like machines or buildings we found one unique part-whole-relation to be insufficient to represent anatomical reality. This claim will be illustrated with anatomical examples. According to the requirements these examples demand, a semantic classification of part-whole-relations is introduced. Initial results in modeling anatomical partonomies for a 3d-visualization environment proved this approach to be an promising way to represent anatomy and to enable powerful complex inferences.

Pathological and Pathophysiological Alterations in Temporal Lobe Structures After Mild Traumatic Brain Injury

DTIC Science & Technology

2014-01-31

rats at 1, 7 and 30 days post-injury compared to sham-operated by microarray analysis (see Table 3) were used as the input for analysis of potential ...SCHS0911 (20 µM), and GYKI S2466 (SO µM), at a holding potential of -70 mV. Representative examples ofrecordings obtained in the BLA are shown in (A...of d-APV (SO µM), SCHS0911 (20 µM), and GYKI S 2466 (SO µM), TTX (1 µM) at a holding potential of - 70 m V. Representative examples of recordings

Time dependent wave envelope finite difference analysis of sound propagation

NASA Technical Reports Server (NTRS)

Baumeister, K. J.

1984-01-01

A transient finite difference wave envelope formulation is presented for sound propagation, without steady flow. Before the finite difference equations are formulated, the governing wave equation is first transformed to a form whose solution tends not to oscillate along the propagation direction. This transformation reduces the required number of grid points by an order of magnitude. Physically, the transformed pressure represents the amplitude of the conventional sound wave. The derivation for the wave envelope transient wave equation and appropriate boundary conditions are presented as well as the difference equations and stability requirements. To illustrate the method, example solutions are presented for sound propagation in a straight hard wall duct and in a two dimensional straight soft wall duct. The numerical results are in good agreement with exact analytical results.

A conceptual data model and modelling language for fields and agents

NASA Astrophysics Data System (ADS)

de Bakker, Merijn; de Jong, Kor; Schmitz, Oliver; Karssenberg, Derek

2016-04-01

Modelling is essential in order to understand environmental systems. Environmental systems are heterogeneous because they consist of fields and agents. Fields have a value defined everywhere at all times, for example surface elevation and temperature. Agents are bounded in space and time and have a value only within their bounds, for example biomass of a tree crown or the speed of a car. Many phenomena have properties of both fields and agents. Although many systems contain both fields and agents and integration of these concepts would be required for modelling, existing modelling frameworks concentrate on either agent-based or field-based modelling and are often low-level programming frameworks. A concept is lacking that integrates fields and agents in a way that is easy to use for modelers who are not software engineers. To address this issue, we develop a conceptual data model that represents fields and agents uniformly. We then show how the data model can be used in a high-level modelling language. The data model represents fields and agents in space-time. Also relations and networks can be represented using the same concepts. Using the conceptual data model we can represent static and mobile agents that may have spatial and temporal variation within their extent. The concepts we use are phenomenon, property set, item, property, domain and value. The phenomenon is the thing that is modelled, which can be any real world thing, for example trees. A phenomenon usually consists of several items, e.g. single trees. The domain is the spatiotemporal location and/or extent for which the items in the phenomenon are defined. Multiple different domains can coexist for a given phenomenon. For example a domain describing the extent of the trees and a domain describing the stem locations. The same goes for the property, which is an attribute of the thing that is being modeled. A property has a value, which is possibly discretized, for example the biomass over the tree crown extent. Properties sharing the same domain are grouped into a property set. The conceptual data model is translated into a physical data model in de Jong et al. (2016, presented in the same session). We have designed a modelling language that allows domain specialists to build models without the programming efforts required by many programming environments. The language is based on the ideas of map algebra. We have defined data types that are associated with a phenomenon. These data types determine the behavior of the language when used as arguments in operations. The result is a concise language in which fields and agents can be combined in operations. We test the language in a case study modelling exposure to air pollution of commuting children. References De Jong, K, M. de Bakker, D. Karssenberg. 2016. A physical data model for fields and agents. European Geosciences Union, EGU General Assembly, 2016, Vienna.

Molecular Pathogenesis and Diagnostic, Prognostic and Predictive Molecular Markers in Sarcoma.

PubMed

Mariño-Enríquez, Adrián; Bovée, Judith V M G

2016-09-01

Sarcomas are infrequent mesenchymal neoplasms characterized by notable morphological and molecular heterogeneity. Molecular studies in sarcoma provide refinements to morphologic classification, and contribute diagnostic information (frequently), prognostic stratification (rarely) and predict therapeutic response (occasionally). Herein, we summarize the major molecular mechanisms underlying sarcoma pathogenesis and present clinically useful diagnostic, prognostic and predictive molecular markers for sarcoma. Five major molecular alterations are discussed, illustrated with representative sarcoma types, including 1. the presence of chimeric transcription factors, in vascular tumors; 2. abnormal kinase signaling, in gastrointestinal stromal tumor; 3. epigenetic deregulation, in chondrosarcoma, chondroblastoma, and other tumors; 4. deregulated cell survival and proliferation, due to focal copy number alterations, in dedifferentiated liposarcoma; 5. extreme genomic instability, in conventional osteosarcoma as a representative example of sarcomas with highly complex karyotype. Copyright © 2016 Elsevier Inc. All rights reserved.

Alternative Fuels Data Center: State Requirements Boost the Transition to

Science.gov Websites

these fleets to choose between one of two compliance methods - Standard Compliance, which requires Laws and Incentives website also includes representative examples of incentives and regulations at the participating in multi-party partnerships are examples of innovative methods that will drive legislation and

Fiscal years 2007 and 2008 : representative examples of completed RD&T projects and activities

DOT National Transportation Integrated Search

2009-06-01

The tables in this document correspond to major offices and initiatives at the Federal Highway Administration's Office of Research, Development, and Technology (RD&T), located at the Turner-Fairbank Highway Research Center. The tables provide represe...

An Ethnolinguistic and Genetic Perspective on the Origins of the Dravidian-Speaking Brahui in Pakistan

PubMed Central

Pagani, Luca; Colonna, Vincenza; Tyler-Smith, Chris; Ayub, Qasim

2017-01-01

Pakistan is a part of South Asia that modern humans encountered soon after they left Africa ~50 – 70,000 years ago. Approximately 9,000 years ago they began establishing cities that eventually expanded to represent the Harappan culture, rivalling the early city states of Mesopotamia. The modern state constitutes the north western land mass of the Indian sub-continent and is now the abode of almost 200 million humans representing many ethnicities and linguistic groups. Studies utilising autosomal, Y chromosomal and mitochondrial DNA markers in selected Pakistani populations revealed a mixture of Western Eurasian-, South- and East Asian-specific lineages, some of which were unequivocally associated with past migrations. Overall in Pakistan, genetic relationships are generally predicted more accurately by geographic proximity than linguistic origin. The Dravidian-speaking Brahui population are a prime example of this. They currently reside in south-western Pakistan, surrounded by Indo-Europeans speakers with whom they share a common genetic origin. In contrast, the Hazara share the highest affinity with East Asians, despite their Indo-European linguistic affiliation. In this report we reexamine the genetic origins of the Brahuis, and compare them with diverse populations from India, including several Dravidian-speaking groups, and present a genetic perspective on ethnolinguistic groups in present-day Pakistan. Given the high affinity of Brahui to the other Indo-European Pakistani populations and the absence of population admixture with any of the examined Indian Dravidian groups, we conclude that Brahui are an example of cultural (linguistic) retention following a major population replacement. PMID:28381901

An Ethnolinguistic and Genetic Perspective on the Origins of the Dravidian-Speaking Brahui in Pakistan.

PubMed

Pagani, Luca; Colonna, Vincenza; Tyler-Smith, Chris; Ayub, Qasim

2017-01-01

Pakistan is a part of South Asia that modern humans encountered soon after they left Africa ~50 - 70,000 years ago. Approximately 9,000 years ago they began establishing cities that eventually expanded to represent the Harappan culture, rivalling the early city states of Mesopotamia. The modern state constitutes the north western land mass of the Indian sub-continent and is now the abode of almost 200 million humans representing many ethnicities and linguistic groups. Studies utilising autosomal, Y chromosomal and mitochondrial DNA markers in selected Pakistani populations revealed a mixture of Western Eurasian-, South- and East Asian-specific lineages, some of which were unequivocally associated with past migrations. Overall in Pakistan, genetic relationships are generally predicted more accurately by geographic proximity than linguistic origin. The Dravidian-speaking Brahui population are a prime example of this. They currently reside in south-western Pakistan, surrounded by Indo-Europeans speakers with whom they share a common genetic origin. In contrast, the Hazara share the highest affinity with East Asians, despite their Indo-European linguistic affiliation. In this report we reexamine the genetic origins of the Brahuis, and compare them with diverse populations from India, including several Dravidian-speaking groups, and present a genetic perspective on ethnolinguistic groups in present-day Pakistan. Given the high affinity of Brahui to the other Indo-European Pakistani populations and the absence of population admixture with any of the examined Indian Dravidian groups, we conclude that Brahui are an example of cultural (linguistic) retention following a major population replacement.

Bayesian methods for uncertainty factor application for derivation of reference values.

PubMed

Simon, Ted W; Zhu, Yiliang; Dourson, Michael L; Beck, Nancy B

2016-10-01

In 2014, the National Research Council (NRC) published Review of EPA's Integrated Risk Information System (IRIS) Process that considers methods EPA uses for developing toxicity criteria for non-carcinogens. These criteria are the Reference Dose (RfD) for oral exposure and Reference Concentration (RfC) for inhalation exposure. The NRC Review suggested using Bayesian methods for application of uncertainty factors (UFs) to adjust the point of departure dose or concentration to a level considered to be without adverse effects for the human population. The NRC foresaw Bayesian methods would be potentially useful for combining toxicity data from disparate sources-high throughput assays, animal testing, and observational epidemiology. UFs represent five distinct areas for which both adjustment and consideration of uncertainty may be needed. NRC suggested UFs could be represented as Bayesian prior distributions, illustrated the use of a log-normal distribution to represent the composite UF, and combined this distribution with a log-normal distribution representing uncertainty in the point of departure (POD) to reflect the overall uncertainty. Here, we explore these suggestions and present a refinement of the methodology suggested by NRC that considers each individual UF as a distribution. From an examination of 24 evaluations from EPA's IRIS program, when individual UFs were represented using this approach, the geometric mean fold change in the value of the RfD or RfC increased from 3 to over 30, depending on the number of individual UFs used and the sophistication of the assessment. We present example calculations and recommendations for implementing the refined NRC methodology. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Taxonomy of the extrasolar planet.

PubMed

Plávalová, Eva

2012-04-01

When a star is described as a spectral class G2V, we know that the star is similar to our Sun. We know its approximate mass, temperature, age, and size. When working with an extrasolar planet database, it is very useful to have a taxonomy scale (classification) such as, for example, the Harvard classification for stars. The taxonomy has to be easily interpreted and present the most relevant information about extrasolar planets. I propose an extrasolar planet taxonomy scale with four parameters. The first parameter concerns the mass of an extrasolar planet in the form of units of the mass of other known planets, where M represents the mass of Mercury, E that of Earth, N Neptune, and J Jupiter. The second parameter is the planet's distance from its parent star (semimajor axis) described in a logarithm with base 10. The third parameter is the mean Dyson temperature of the extrasolar planet, for which I established four main temperature classes: F represents the Freezing class, W the Water class, G the Gaseous class, and R the Roasters class. I devised one additional class, however: P, the Pulsar class, which concerns extrasolar planets orbiting pulsar stars. The fourth parameter is eccentricity. If the attributes of the surface of the extrasolar planet are known, we are able to establish this additional parameter where t represents a terrestrial planet, g a gaseous planet, and i an ice planet. According to this taxonomy scale, for example, Earth is 1E0W0t, Neptune is 1N1.5F0i, and extrasolar planet 55 Cnc e is 9E-1.8R1.

Nursing Classification Systems

PubMed Central

Henry, Suzanne Bakken; Mead, Charles N.

1997-01-01

Abstract Our premise is that from the perspective of maximum flexibility of data usage by computer-based record (CPR) systems, existing nursing classification systems are necessary, but not sufficient, for representing important aspects of “what nurses do.” In particular, we have focused our attention on those classification systems that represent nurses' clinical activities through the abstraction of activities into categories of nursing interventions. In this theoretical paper, we argue that taxonomic, combinatorial vocabularies capable of coding atomic-level nursing activities are required to effectively capture in a reproducible and reversible manner the clinical decisions and actions of nurses, and that, without such vocabularies and associated grammars, potentially important clinical process data is lost during the encoding process. Existing nursing intervention classification systems do not fulfill these criteria. As background to our argument, we first present an overview of the content, methods, and evaluation criteria used in previous studies whose focus has been to evaluate the effectiveness of existing coding and classification systems. Next, using the Ingenerf typology of taxonomic vocabularies, we categorize the formal type and structure of three existing nursing intervention classification systems—Nursing Interventions Classification, Omaha System, and Home Health Care Classification. Third, we use records from home care patients to show examples of lossy data transformation, the loss of potentially significant atomic data, resulting from encoding using each of the three systems. Last, we provide an example of the application of a formal representation methodology (conceptual graphs) which we believe could be used as a model to build the required combinatorial, taxonomic vocabulary for representing nursing interventions. PMID:9147341

Point coordinates extraction from localized hyperbolic reflections in GPR data

NASA Astrophysics Data System (ADS)

Ristić, Aleksandar; Bugarinović, Željko; Vrtunski, Milan; Govedarica, Miro

2017-09-01

In this paper, we propose an automated detection algorithm for the localization of apexes and points on the prongs of hyperbolic reflection incurred as a result of GPR scanning technology. The objects of interest encompass cylindrical underground utilities that have a distinctive form of hyperbolic reflection in radargram. Algorithm involves application of trained neural network to analyze radargram in the form of raster image, resulting with extracted segments of interest that contain hyperbolic reflections. This significantly reduces the amount of data for further analysis. Extracted segments represent the zone for localization of apices. This is followed by extraction of points on prongs of hyperbolic reflections which is carried out until stopping criterion is satisfied, regardless the borders of segment of interest. In final step a classification of false hyperbolic reflections caused by the constructive interference and their removal is done. The algorithm is implemented in MATLAB environment. There are several advantages of the proposed algorithm. It can successfully recognize true hyperbolic reflections in radargram images and extracts coordinates, with very low rate of false detections and without prior knowledge about the number of hyperbolic reflections or buried utilities. It can be applied to radargrams containing single and multiple hyperbolic reflections, intersected, distorted, as well as incomplete (asymmetric) hyperbolic reflections, all in the presence of higher level of noise. Special feature of algorithm is developed procedure for analysis and removal of false hyperbolic reflections generated by the constructive interference from reflectors associated with the utilities. Algorithm was tested on a number of synthetic and radargram acquired in the field survey. To illustrate the performances of the proposed algorithm, we present the characteristics of the algorithm through five representative radargrams obtained in real conditions. In these examples we present different acquisition scenarios by varying the number of buried objects, their disposition, size, and level of noise. Example with highest complexity was tested also as a synthetic radargram generated by gprMax. Processing time in examples with one or two hyperbolic reflections is from 0.1 to 0.3 s, while for the most complex examples it is from 2.2 to 4.9 s. In general, the obtained experimental results show that the proposed algorithm exhibits promising performances both in terms of utility detection and processing speed of the algorithm.

Psychology of knowledge representation.

PubMed

Grimm, Lisa R

2014-05-01

Every cognitive enterprise involves some form of knowledge representation. Humans represent information about the external world and internal mental states, like beliefs and desires, and use this information to meet goals (e.g., classification or problem solving). Unfortunately, researchers do not have direct access to mental representations. Instead, cognitive scientists design experiments and implement computational models to develop theories about the mental representations present during task performance. There are several main types of mental representation and corresponding processes that have been posited: spatial, feature, network, and structured. Each type has a particular structure and a set of processes that are capable of accessing and manipulating information within the representation. The structure and processes determine what information can be used during task performance and what information has not been represented at all. As such, the different types of representation are likely used to solve different kinds of tasks. For example, structured representations are more complex and computationally demanding, but are good at representing relational information. Researchers interested in human psychology would benefit from considering how knowledge is represented in their domain of inquiry. For further resources related to this article, please visit the WIREs website. The author has declared no conflicts of interest for this article. © 2014 John Wiley & Sons, Ltd.

Forest Creeks Research Natural Area: guidebook supplement 39

Treesearch

Reid Schuller; Ron Halvorson

2010-01-01

This guidebook describes Forest Creeks Research Natural Area, a 164-ha (405-ac) area comprising two geographically distinct canyons and associated drainages. The two units have been established as examples of first- to third-order streams originating within a ponderosa pine (Pinus ponderosa) zone. The two riparian areas also represent examples of...

Interface through Cooperative Agreements: Eleven Examples of How It Can Work.

ERIC Educational Resources Information Center

Jellison, Holly M., Ed.

Designed as a resource for community colleges wishing to initiate a cooperative agreement with a local agency to offer community education programs, this publication offers 11 representative examples of such agreements. After explaining that the Center for Community Education collected the agreements as part of a 1981 study of community education…

Oxidation resistance of silicon ceramics

NASA Technical Reports Server (NTRS)

Yasutoshi, H.; Hirota, K.

1984-01-01

Oxidation resistance, and examples of oxidation of SiC, Si3N4 and sialon are reviewed. A description is given of the oxidation mechanism, including the oxidation product, oxidation reaction and the bubble size. The oxidation reactions are represented graphically. An assessment is made of the oxidation process, and an oxidation example of silicon ceramics is given.

HYTESS 2: A Hypothetical Turbofan Engine Simplified Simulation with multivariable control and sensor analytical redundancy

NASA Technical Reports Server (NTRS)

Merrill, W. C.

1986-01-01

A hypothetical turbofan engine simplified simulation with a multivariable control and sensor failure detection, isolation, and accommodation logic (HYTESS II) is presented. The digital program, written in FORTRAN, is self-contained, efficient, realistic and easily used. Simulated engine dynamics were developed from linearized operating point models. However, essential nonlinear effects are retained. The simulation is representative of the hypothetical, low bypass ratio turbofan engine with an advanced control and failure detection logic. Included is a description of the engine dynamics, the control algorithm, and the sensor failure detection logic. Details of the simulation including block diagrams, variable descriptions, common block definitions, subroutine descriptions, and input requirements are given. Example simulation results are also presented.

Correction of bias in belt transect studies of immotile objects

USGS Publications Warehouse

Anderson, D.R.; Pospahala, R.S.

1970-01-01

Unless a correction is made, population estimates derived from a sample of belt transects will be biased if a fraction of, the individuals on the sample transects are not counted. An approach, useful for correcting this bias when sampling immotile populations using transects of a fixed width, is presented. The method assumes that a searcher's ability to find objects near the center of the transect is nearly perfect. The method utilizes a mathematical equation, estimated from the data, to represent the searcher's inability to find all objects at increasing distances from the center of the transect. An example of the analysis of data, formation of the equation, and application is presented using waterfowl nesting data collected in Colorado.

Lead burdens and behavioral impairments of the lined shore crab Pachygrapsus crassipes

USGS Publications Warehouse

Hui, Clifford A.

2002-01-01

Unless a correction is made, population estimates derived from a sample of belt transects will be biased if a fraction of, the individuals on the sample transects are not counted. An approach, useful for correcting this bias when sampling immotile populations using transects of a fixed width, is presented. The method assumes that a searcher's ability to find objects near the center of the transect is nearly perfect. The method utilizes a mathematical equation, estimated from the data, to represent the searcher's inability to find all objects at increasing distances from the center of the transect. An example of the analysis of data, formation of the equation, and application is presented using waterfowl nesting data collected in Colorado.

A Parametric k-Means Algorithm

PubMed Central

Tarpey, Thaddeus

2007-01-01

Summary The k points that optimally represent a distribution (usually in terms of a squared error loss) are called the k principal points. This paper presents a computationally intensive method that automatically determines the principal points of a parametric distribution. Cluster means from the k-means algorithm are nonparametric estimators of principal points. A parametric k-means approach is introduced for estimating principal points by running the k-means algorithm on a very large simulated data set from a distribution whose parameters are estimated using maximum likelihood. Theoretical and simulation results are presented comparing the parametric k-means algorithm to the usual k-means algorithm and an example on determining sizes of gas masks is used to illustrate the parametric k-means algorithm. PMID:17917692

250 kA compact linear transformer driver for wire array z-pinch loads

NASA Astrophysics Data System (ADS)

Bott, S. C.; Haas, D. M.; Madden, R. E.; Ueda, U.; Eshaq, Y.; Collins, G., IV; Gunasekera, K.; Mariscal, D.; Peebles, J.; Beg, F. N.; Mazarakis, M.; Struve, K.; Sharpe, R.

2011-05-01

We present the application of a short rise (˜150ns) 250 kA linear transformer driver (LTD) to wire array z-pinch loads for the first time. The generator is a modification of a previous driver in which a new conical power feed provides a low inductance coupling to wire loads. Performance of the new design using both short circuit and plasma loads is presented and discussed. The final design delivers ˜200kA to a wire array load which is in good agreement with SCREAMER calculations using a simplified representative circuit. Example results demonstrate successful experiments using cylindrical, conical, and inverse wire arrays as well as previously published work on x-pinch loads.

Food habits of the Egyptians: newly emerging trends.

PubMed

Hassan-Wassef, H

2004-11-01

Accelerated changes are taking place in the food habits of the present day Egyptians. Examples are drawn from foods that continue to be consumed by those considered guardians of the Egyptian tradition (Coptic Christians and isolated farming communities) and from interpretation of archaeological evidence. Recent decades have witnessed the progressive erosion of the traditional Egyptian diet and the introduction of new foods and eating habits. Sociocultural and economic changes are accelerating this erosion. The main features of the traditional Egyptian way of eating are presented along with a review of the emerging trends and of some of the important factors underlying food consumption patterns. Attention is drawn to the potential risk to health that these new trends represent, in particular to child nutrition and development.

Electric field stimulation setup for photoemission electron microscopes.

PubMed

Buzzi, M; Vaz, C A F; Raabe, J; Nolting, F

2015-08-01

Manipulating magnetisation by the application of an electric field in magnetoelectric multiferroics represents a timely issue due to the potential applications in low power electronics and the novel physics involved. Thanks to its element sensitivity and high spatial resolution, X-ray photoemission electron microscopy is a uniquely suited technique for the investigation of magnetoelectric coupling in multiferroic materials. In this work, we present a setup that allows for the application of in situ electric and magnetic fields while the sample is analysed in the microscope. As an example of the performances of the setup, we present measurements on Ni/Pb(Mg(0.66)Nb(0.33))O3-PbTiO3 and La(0.7)Sr(0.3)MnO3/PMN-PT artificial multiferroic nanostructures.

28 CFR 540.45 - Qualification as special visitor.

Code of Federal Regulations, 2010 CFR

2010-07-01

... visitors. (c) Representatives of community groups. The Warden may approve visits on a recurring basis to representatives from community groups (for example, civic, volunteer, or religious organizations) who are acting... or with a group of inmates. The requirement for the existence of an established relationship prior to...

Considerations for the application of finite element beam modeling to vibration analysis of flight vehicle structures. Ph.D. Thesis - Case Western Reserve Univ.

NASA Technical Reports Server (NTRS)

Kvaternik, R. G.

1976-01-01

The manner of representing a flight vehicle structure as an assembly of beam, spring, and rigid-body components for vibration analysis is described. The development is couched in terms of a substructures methodology which is based on the finite-element stiffness method. The particular manner of employing beam, spring, and rigid-body components to model such items as wing structures, external stores, pylons supporting engines or external stores, and sprung masses associated with launch vehicle fuel slosh is described by means of several simple qualitative examples. A detailed numerical example consisting of a tilt-rotor VTOL aircraft is included to provide a unified illustration of the procedure for representing a structure as an equivalent system of beams, springs, and rigid bodies, the manner of forming the substructure mass and stiffness matrices, and the mechanics of writing the equations of constraint which enforce deflection compatibility at the junctions of the substructures. Since many structures, or selected components of structures, can be represented in this manner for vibration analysis, the modeling concepts described and their application in the numerical example shown should prove generally useful to the dynamicist.

A segmentation/clustering model for the analysis of array CGH data.

PubMed

Picard, F; Robin, S; Lebarbier, E; Daudin, J-J

2007-09-01

Microarray-CGH (comparative genomic hybridization) experiments are used to detect and map chromosomal imbalances. A CGH profile can be viewed as a succession of segments that represent homogeneous regions in the genome whose representative sequences share the same relative copy number on average. Segmentation methods constitute a natural framework for the analysis, but they do not provide a biological status for the detected segments. We propose a new model for this segmentation/clustering problem, combining a segmentation model with a mixture model. We present a new hybrid algorithm called dynamic programming-expectation maximization (DP-EM) to estimate the parameters of the model by maximum likelihood. This algorithm combines DP and the EM algorithm. We also propose a model selection heuristic to select the number of clusters and the number of segments. An example of our procedure is presented, based on publicly available data sets. We compare our method to segmentation methods and to hidden Markov models, and we show that the new segmentation/clustering model is a promising alternative that can be applied in the more general context of signal processing.

Calibration of piezoelectric RL shunts with explicit residual mode correction

NASA Astrophysics Data System (ADS)

Høgsberg, Jan; Krenk, Steen

2017-01-01

Piezoelectric RL (resistive-inductive) shunts are passive resonant devices used for damping of dominant vibration modes of a flexible structure and their efficiency relies on the precise calibration of the shunt components. In the present paper improved calibration accuracy is attained by an extension of the local piezoelectric transducer displacement by two additional terms, representing the flexibility and inertia contributions from the residual vibration modes not directly addressed by the shunt damping. This results in an augmented dynamic model for the targeted resonant vibration mode, in which the residual contributions, represented by two correction factors, modify both the apparent transducer capacitance and the shunt circuit impedance. Explicit expressions for the correction of the shunt circuit inductance and resistance are presented in a form that is generally applicable to calibration formulae derived on the basis of an assumed single-mode structure, where modal interaction has been neglected. A design procedure is devised and subsequently verified by a numerical example, which demonstrates that effective mitigation can be obtained for an arbitrary vibration mode when the residual mode correction is included in the calibration of the RL shunt.

Shock Layer Radiation Measurements and Analysis for Mars Entry

NASA Technical Reports Server (NTRS)

Bose, Deepak; Grinstead, Jay Henderson; Bogdanoff, David W.; Wright, Michael J.

2009-01-01

NASA's In-Space Propulsion program is supporting the development of shock radiation transport models for aerocapture missions to Mars. A comprehensive test series in the NASA Antes Electric Arc Shock Tube facility at a representative flight condition was recently completed. The facility optical instrumentation enabled spectral measurements of shocked gas radiation from the vacuum ultraviolet to the near infrared. The instrumentation captured the nonequilibrium post-shock excitation and relaxation dynamics of dispersed spectral features. A description of the shock tube facility, optical instrumentation, and examples of the test data are presented. Comparisons of measured spectra with model predictions are also made.

Ground resonance analysis using a substructure modeling approach

NASA Technical Reports Server (NTRS)

Chen, S.-Y.; Berman, A.; Austin, E. E.

1984-01-01

A convenient and versatile procedure for modeling and analyzing ground resonance phenomena is described and illustrated. A computer program is used which dynamically couples differential equations with nonlinear and time dependent coefficients. Each set of differential equations may represent a component such as a rotor, fuselage, landing gear, or a failed damper. Arbitrary combinations of such components may be formulated into a model of a system. When the coupled equations are formed, a procedure is executed which uses a Floquet analysis to determine the stability of the system. Illustrations of the use of the procedures along with the numerical examples are presented.

Ground resonance analysis using a substructure modeling approach

NASA Technical Reports Server (NTRS)

Chen, S. Y.; Austin, E. E.; Berman, A.

1985-01-01

A convenient and versatile procedure for modeling and analyzing ground resonance phenomena is described and illustrated. A computer program is used which dynamically couples differential equations with nonlinear and time dependent coefficients. Each set of differential equations may represent a component such as a rotor, fuselage, landing gear, or a failed damper. Arbitrary combinations of such components may be formulated into a model of a system. When the coupled equations are formed, a procedure is executed which uses a Floquet analysis to determine the stability of the system. Illustrations of the use of the procedures along with the numerical examples are presented.

mGluR4 positive allosteric modulators with potential for the treatment of Parkinson's disease: WO09010455.

PubMed

East, Stephen P; Gerlach, Kai

2010-03-01

Stimulation of the metabotropic glutamate receptor 4 (mGluR4) represents a promising new approach to the symptomatic treatment of the neurodegenerative disorder Parkinson's disease (PD). Preclinical models using both agonists and positive allosteric modulators of mGluR4 have demonstrated the potential for this receptor for the treatment of PD. The present article evaluates a recent patent filed by Addex Pharma S.A. claiming a novel series of mGluR4 positive allosteric modulators. Many of the examples disclosed are active at EC(50)'s < 500 nM.

Stereographic Projection Techniques for Geologists and Civil Engineers

NASA Astrophysics Data System (ADS)

Lisle, Richard J.; Leyshon, Peter R.

2004-05-01

An essential tool in the fields of structural geology and geotechnics, stereographic projection allows three-dimensional orientation data to be represented and manipulated. This revised edition presents a basic introduction to the subject with examples, illustrations and exercises that encourage the student to visualize the problems in three dimensions. It will provide students of geology, rock mechanics, and geotechnical and civil engineering with an indispensable guide to the analysis and interpretation of field orientation data. Links to useful web resources and software programs are also provided. First Edition published by Butterworth-Heinemann (1996): 0-750-62450-7

Bisubstrate inhibition: Theory and application to N-acetyltransferases.

PubMed

Yu, Michael; Magalhães, Maria L B; Cook, Paul F; Blanchard, John S

2006-12-12

Bisubstrate inhibitors represent a potentially powerful group of compounds that have found significant therapeutic utility. Although these compounds have been synthesized and tested against a number of enzymes that catalyze sequential bireactant reactions, the detailed theory for predicting the expected patterns of inhibition against the two substrates for various bireactant kinetic mechanisms has, heretofore, not been presented. We have derived the rate equations for all likely sequential bireactant mechanisms and provide two examples in which bisubstrate inhibitors allow the kinetic mechanism to be determined. Bisubstrate inhibitor kinetics is a powerful diagnostic for the determination of kinetic mechanisms.

Parallel Multi-Step/Multi-Rate Integration of Two-Time Scale Dynamic Systems

NASA Technical Reports Server (NTRS)

Chang, Johnny T.; Ploen, Scott R.; Sohl, Garett. A,; Martin, Bryan J.

2004-01-01

Increasing demands on the fidelity of simulations for real-time and high-fidelity simulations are stressing the capacity of modern processors. New integration techniques are required that provide maximum efficiency for systems that are parallelizable. However many current techniques make assumptions that are at odds with non-cascadable systems. A new serial multi-step/multi-rate integration algorithm for dual-timescale continuous state systems is presented which applies to these systems, and is extended to a parallel multi-step/multi-rate algorithm. The superior performance of both algorithms is demonstrated through a representative example.

The material of practice: the Canadian Nursing History Collection.

PubMed

Bates, Christina

2004-01-01

The Canadian Nursing History Collection is a special holding of over 1500 artifacts at the Canadian Museum of Civilization and the Canadian War Museum. The most significant of its kind, the collection includes uniforms, pins, diaries, instrument kits, and military medals. Researchers and the public will access the collection through an on-line catalogue, a major exhibition, and a book. The material culture of nursing represented by this collection provides nursing historians with a whole new body of evidence for insights into nursing history. The sample of hospital uniforms, from 1900 to the present, for example, raises new and theoretical approaches.

Content-based video retrieval by example video clip

NASA Astrophysics Data System (ADS)

Dimitrova, Nevenka; Abdel-Mottaleb, Mohamed

1997-01-01

This paper presents a novel approach for video retrieval from a large archive of MPEG or Motion JPEG compressed video clips. We introduce a retrieval algorithm that takes a video clip as a query and searches the database for clips with similar contents. Video clips are characterized by a sequence of representative frame signatures, which are constructed from DC coefficients and motion information (`DC+M' signatures). The similarity between two video clips is determined by using their respective signatures. This method facilitates retrieval of clips for the purpose of video editing, broadcast news retrieval, or copyright violation detection.

NASA spinoffs to energy and the environment

NASA Technical Reports Server (NTRS)

Gilbert, Ray L.; Lehrman, Stephen A.

1989-01-01

Thousands of aerospace innovations have found their way into everyday use, and future National Aeronautics and Space Administration (NASA) missions promise to provide many more spinoff opportunities. Each spinoff has contributed some measure of benefit to the national economy, productivity, or lifestyle. In total, these spinoffs represent a substantial dividend on the national investment in aerospace research. Along with examples of the many terrestrial applications of NASA technology to energy and the environment, this paper presents the mechanisms by which NASA promotes technology transfer. Also discussed are new NASA initiatives in superconductivity research, global warming, and aeropropulsion.

Design and outcomes of an acoustic data visualization seminar.

PubMed

Robinson, Philip W; Pätynen, Jukka; Haapaniemi, Aki; Kuusinen, Antti; Leskinen, Petri; Zan-Bi, Morley; Lokki, Tapio

2014-01-01

Recently, the Department of Media Technology at Aalto University offered a seminar entitled Applied Data Analysis and Visualization. The course used spatial impulse response measurements from concert halls as the context to explore high-dimensional data visualization methods. Students were encouraged to represent source and receiver positions, spatial aspects, and temporal development of sound fields, frequency characteristics, and comparisons between halls, using animations and interactive graphics. The primary learning objectives were for the students to translate their skills across disciplines and gain a working understanding of high-dimensional data visualization techniques. Accompanying files present examples of student-generated, animated and interactive visualizations.

Bird impact analysis package for turbine engine fan blades

NASA Technical Reports Server (NTRS)

Hirschbein, M. S.

1982-01-01

A computer program has been developed to analyze the gross structural response of turbine engine fan blades subjected to bird strikes. The program couples a NASTRAN finite element model and modal analysis of a fan blade with a multi-mode bird impact analysis computer program. The impact analysis uses the NASTRAN blade model and a fluid jet model of the bird to interactively calculate blade loading during a bird strike event. The analysis package is computationaly efficient, easy to use and provides a comprehensive history of the gross structual blade response. Example cases are presented for a representative fan blade.

Intelligent Data Analysis in the EMERCOM Information System

NASA Astrophysics Data System (ADS)

Elena, Sharafutdinova; Tatiana, Avdeenko; Bakaev, Maxim

2017-01-01

The paper describes an information system development project for the Russian Ministry of Emergency Situations (MES, whose international operations body is known as EMERCOM), which was attended by the representatives of both the IT industry and the academia. Besides the general description of the system, we put forward OLAP and Data Mining-based approaches towards the intelligent analysis of the data accumulated in the database. In particular, some operational OLAP reports and an example of multi-dimensional information space based on OLAP Data Warehouse are presented. Finally, we outline Data Mining application to support decision-making regarding security inspections planning and results consideration.

LDEF materials data analysis: Representative examples

NASA Technical Reports Server (NTRS)

Pippin, H. Gary; Crutcher, E. R.

1992-01-01

Results of measurements on silverized teflon, heat shrink tubing and nylon tie downs on the wire harness clamps, silvered hex nuts, and contamination deposits are presented. We interpret the results in terms of our microenvironments exposure model and locations on the Long Duration Exposure Facility (LDEF). Distinct changes in the surface properties of FEP were observed as a function of UV exposure. Significant differences in outgassing characteristics were detected for hardware on the interior row 3 relative to identical hardware on the interior row 3 relative to identical hardware on nearby rows. The implications for in service performance are reviewed.

Nucleic acid probes in diagnostic medicine

NASA Technical Reports Server (NTRS)

Oberry, Phillip A.

1991-01-01

The need for improved diagnostic procedures is outlined and variations in probe technology are briefly reviewed. A discussion of the application of probe technology to the diagnosis of disease in animals and humans is presented. A comparison of probe versus nonprobe diagnostics and isotopic versus nonisotopic probes is made and the current state of sequence amplification is described. The current market status of nucleic acid probes is reviewed with respect to their diagnostic application in human and veterinary medicine. Representative product examples are described and information on probes being developed that offer promise as future products is discussed.

Multigrid techniques for unstructured meshes

NASA Technical Reports Server (NTRS)

Mavriplis, D. J.

1995-01-01

An overview of current multigrid techniques for unstructured meshes is given. The basic principles of the multigrid approach are first outlined. Application of these principles to unstructured mesh problems is then described, illustrating various different approaches, and giving examples of practical applications. Advanced multigrid topics, such as the use of algebraic multigrid methods, and the combination of multigrid techniques with adaptive meshing strategies are dealt with in subsequent sections. These represent current areas of research, and the unresolved issues are discussed. The presentation is organized in an educational manner, for readers familiar with computational fluid dynamics, wishing to learn more about current unstructured mesh techniques.

Use Of REX Control System For The Ball On Spool Model

NASA Astrophysics Data System (ADS)

Ožana, Štěpán; Pieš, Martin; Hájovský, Radovan; Dočekal, Tomáš

2015-07-01

This paper deals with the design and implementation of linear quadratic controller (LQR) for modeling of Ball on Spool. The paper presents the entire process, starting from mathematical model through control design towards application of controller with the use of given hardware platform. Proposed solution by means of REX Control System provides a high level of user comfort regarding implementation of control loop, diagnostics and automatically generated visualization based on HTML5. It represents an ideal example of a complex nonlinear mechatronic system with a lot of possibilities to apply other types of controllers.

Advanced techniques for the storage and use of very large, heterogeneous spatial databases. The representation of geographic knowledge: Toward a universal framework. [relations (mathematics)

NASA Technical Reports Server (NTRS)

Peuquet, Donna J.

1987-01-01

A new approach to building geographic data models that is based on the fundamental characteristics of the data is presented. An overall theoretical framework for representing geographic data is proposed. An example of utilizing this framework in a Geographic Information System (GIS) context by combining artificial intelligence techniques with recent developments in spatial data processing techniques is given. Elements of data representation discussed include hierarchical structure, separation of locational and conceptual views, and the ability to store knowledge at variable levels of completeness and precision.

Adolescent females "voice" changes can signal difficulties for teachers and administrators.

PubMed

Wren, D J

1997-01-01

This article describes the different preferences in learning styles of adolescent females and males, based on the pioneering work on adolescent values development by Lawrence Kohlberg and Carol Gilligan. Since values education programs are currently considered very important, educators need to explore the philosophical, psychological, and social influences on students' learning preferences before they can introduce appropriate curricula. An indication of problems in adolescent females frequently is the occurrence of voice changes, for example, girls may express viewpoints that do not represent their true beliefs and feelings. Curricular and co-curricular suggestions are presented.

Hypothesis: Hemolytic Transfusion Reactions Represent an Alternative Type of Anaphylaxis

PubMed Central

Hod, Eldad A.; Sokol, Set A.; Zimring, James C.; Spitalnik, Steven L.

2009-01-01

Classical anaphylaxis is the most severe, and potentially fatal, type of allergic reaction, manifested by hypotension, bronchoconstriction, and vascular permeability. Similarly, a hemolytic transfusion reaction (HTR) is the most feared consequence of blood transfusion. Evidence for the existence of an alternative, IgG-mediated pathway of anaphylaxis may be relevant for explaining the pathophysiology of IgG-mediated-HTRs. The purpose of this review is to summarize the evidence for this alternative pathway of anaphylaxis and to present the hypothesis that an IgG-mediated HTR is one example of this type of anaphylaxis. PMID:18830382

Self-immolation: cause and culture.

PubMed

Romm, Sharon; Combs, Heidi; Klein, Matthew B

2008-01-01

Accounts of self-inflicted death by fire are numerous and are found from antiquity to present times. We review selected examples of self-immolation from historical record, in mythology and as part of religious and cultural tradition. We discuss the use of self-immolation as a literary device in the arts including fiction, opera, movies, and song. We offer motives for this horrifying act and discuss how it has been used as a form of protest for political reasons or for individual maltreatment or as a means to end intense personal suffering. Finally, we explore what setting oneself alight may represent from a psychodynamic perspective.

[Psychosomatic pain in the field of gynecology. Stages of the formation of psychosomatic reactions and symptoms with examples of cases (author's transl)].

PubMed

Poettgen, H

1976-12-01

1. Understanding disease in the context of a hermeneutic of the ill person's life history forces us to abandon the old understanding of causality which is represented by the model of body-soul polarity. The real onset of an illness has a biographic pre-history. Long latent periods may occur before and between "functio laesa" and actual damage to the involved organ. On the basis of psychosomatic case histories, we can conclude that the future-orientation of an individual's life, that for which man must make decisions, is also that which causes the crises situation for those who are suffering. 2. Psychosomatic medicine cannot simply be included in an already existing medical discipline such as, for example, perinatology can be included in gynecology or pediatrics. It implies a whole new understanding of illness and, above all, it requires a new attitude on the part of the physician. The patient must be allowed to cooperate in his self-realization; the physician himself becomes the medicine. 3. An attempt was made to illustrate the concept of "organ language" on the basis of 6 brief examples from psychosomatic gynecology. Here only the most important information was presented. According to the concept of "organ language", the soma and psyche of the suffering person can represent and interpret each other reciprocally. It also becomes obvious that conflicts at various strata of being can use one and the same physical symptom if a common denominator is present (e.g., defence overagainst a danger, a disease or a role). This type of teleological nosology implies a new dimension for the consideration a disease, namely, the question of the meaning of suffering. 4. The examples cited are almost exclusively found in the understanding of sexuality in the broadest sense of the word. The threat of individuation as the final personality organization resulting from inadequate realization of the individual's own sex determination (Friedrichs) is present. 5. The sixth example clearly illustrates that sexuality is not what it is commonly considered to be. Rather, it permeates all state of personality and extends beyond them into areas of cultural and intellectual life. Whether or not a woman engages in sexual activity is not important (as had originally been thought). What is important is her attitude toward her own sex, toware her sexual activity and, therefore, also toward her partner and the environment. True sexual activity means infinitely more than just the automatic physiological act. In total self-abandonment to the "Thou", perfect sexual love becomes a knowing penetration of being. Genesis 4:1 states: "Now Adam knew Eve his wife...". The Hebrew word for "know" (yada') means both to know and to beget. Through the mystery of this word, something of the perfection, of the "participation mystique" in the work of creation becomes transparent in the perfect sexual union of two human beings!

An Example of an INPRO Assessment of an INS in the Area of Waste Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allan, C.; Busurin, Y.; Depisch, F.

2006-07-01

Following a resolution of the General Conference of the IAEA in the year 2000 the International Project on Innovative Nuclear Reactors and Fuel Cycles, referred to as INPRO, was initiated. INPRO has defined requirements organized in a hierarchy of Basic Principles, User Requirements and Criteria (consisting of an indicator and an acceptance limit) to be met by innovative nuclear reactor systems (INS) in six areas, namely: economics, safety, waste management, environment, proliferation resistance, and infrastructure. If an INS meets all requirements in all areas it represents a sustainable system for the supply of energy, capable of making a significant contributionmore » to meeting the energy needs of the 21. century. Draft manuals have been developed, for each INPRO area, to provide guidance for performing an assessment of whether an INS meets the INPRO requirements in a given area. The manuals set out the information that needs to be assembled to perform an assessment and provide guidance on selecting the acceptance limits and, for a given INS, for determining the value of the indicators for comparison with the associated acceptance limits. Each manual also includes an example of a specific assessment to illustrate the guidance. This paper discusses the example presented in the manual for performing an INPRO assessment in the area of waste management. The example, chosen solely for the purpose of illustrating the INPRO methodology, describes an assessment of an INS based on the DUPIC fuel cycle. It is assumed that uranium is mined, milled, converted, enriched, and fabricated into LWR fuel in Canada. The LWR fuel is assumed to be leased to a utility in the USA. The spent LWR fuel is assumed to be returned to Canada where it is processed into CANDU DUPIC fuel, which is then burned in CANDU reactors. The assessment steps and the results are presented in detail in the paper. The example illustrates an assessment performed for an INS at an early stage of development. (authors)« less

Male genital representation in paleolithic art: erection and circumcision before history.

PubMed

Angulo, Javier C; García-Díez, Marcos

2009-07-01

To report on the likely existing evidence about the practice of circumcision in prehistory, or at least a culture of foreskin retraction, and also the meaning of erection in Paleolithic minds. The origin of the ritual of circumcision has been lost in time. Similarly, the primitive anthropologic meaning of erection is undefined. We studied the archeologic and artistic evidence regarding human representations performed during the Upper Paleolithic period, 38,000 to 11,000 years BCE, in Europe, with a focus on genital male representations in portable and rock art. Drawings, engravings, and sculptures displaying humans are relatively scarce, and <100 examples of male genitals are specifically represented. Some depict a circumcised penis and other represent urologic disorders such as phimosis, paraphimosis, discharge, priapism, or a scrotal mass. In addition, a small number of phalluses carved in horn, bone, or stone, with varying morphology, has survived to the present and also reveals a sustained cult for male erection and foreskin retraction not limited to a particular topographical territory. The very few noncoital human or humanoid figures with marked erection appear in a context of serious danger or death. Therefore, erection could be understood as a phenomenon related to the shamanic transit between life and death. The erection in Paleolithic art is explicitly represented in almost all the figures defined as unequivocally male that have survived to the present and in many objects of portable art. Circumcision and/or foreskin retraction of the penis are present in most of the works.

Damage detection of building structures under ambient excitation through the analysis of the relationship between the modal participation ratio and story stiffness

NASA Astrophysics Data System (ADS)

Park, Hyo Seon; Oh, Byung Kwan

2018-03-01

This paper presents a new approach for the damage detection of building structures under ambient excitation based on the inherent modal characteristics. In this study, without the extraction of modal parameters widely utilized in the previous studies on damage detection, a new index called the modal participation ratio (MPR), which is a representative value of the modal response extracted from dynamic responses measured in ambient vibration tests, is proposed to evaluate the change of the system of a structure according to the reduction of the story stiffness. The relationship between the MPR, representing a modal contribution for a specific mode and degree of freedom in buildings, and the story stiffness damage factor (SSDF), representing the extent of reduction in the story stiffness, is analyzed in various damage scenarios. From the analyses with three examples, several rules for the damage localization of building structures are found based on the characteristics of the MPR variation for the first mode subject to change in the SSDF. In addition, a damage severity function, derived from the relationship between the MPR for the first mode in the lowest story and the SSDF, is constructed to identify the severity of story stiffness reduction. Furthermore, the locations and severities of multiple damages are identified via the superposition of the presented damage severity functions. The presented method was applied to detect damage in a three-dimensional reinforced concrete (RC) structure.

A substructure coupling procedure applicable to general linear time-invariant dynamic systems

NASA Technical Reports Server (NTRS)

Howsman, T. G.; Craig, R. R., Jr.

1984-01-01

A substructure synthesis procedure applicable to structural systems containing general nonconservative terms is presented. In their final form, the nonself-adjoint substructure equations of motion are cast in state vector form through the use of a variational principle. A reduced-order mode for each substructure is implemented by representing the substructure as a combination of a small number of Ritz vectors. For the method presented, the substructure Ritz vectors are identified as a truncated set of substructure eigenmodes, which are typically complex, along with a set of generalized real attachment modes. The formation of the generalized attachment modes does not require any knowledge of the substructure flexible modes; hence, only the eigenmodes used explicitly as Ritz vectors need to be extracted from the substructure eigenproblem. An example problem is presented to illustrate the method.

Beauty from the beast: Avoiding errors in responding to client questions.

PubMed

Waehler, Charles A; Grandy, Natalie M

2016-09-01

Those rare moments when clients ask direct questions of their therapists likely represent a point when they are particularly open to new considerations, thereby representing an opportunity for substantial therapeutic gains. However, clinical errors abound in this area because clients' questions often engender apprehension in therapists, causing therapists to respond with too little or too much information or shutting down the discussion prematurely. These response types can damage the therapeutic relationship, the psychotherapy process, or both. We explore the nature of these clinical errors in response to client questions by providing examples from our own clinical work, suggesting potential reasons why clinicians may not make optimal use of client questions, and discussing how the mixed psychological literature further complicates the issue. We also present four guidelines designed to help therapists, trainers, and supervisors respond constructively to clinical questions in order to create constructive interactions. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

A subsystem identification method based on the path concept with coupling strength estimation

NASA Astrophysics Data System (ADS)

Magrans, Francesc Xavier; Poblet-Puig, Jordi; Rodríguez-Ferran, Antonio

2018-02-01

For complex geometries, the definition of the subsystems is not a straightforward task. We present here a subsystem identification method based on the direct transfer matrix, which represents the first-order paths. The key ingredient is a cluster analysis of the rows of the powers of the transfer matrix. These powers represent high-order paths in the system and are more affected than low-order paths by damping. Once subsystems are identified, the proposed approach also provides a quantification of the degree of coupling between subsystems. This information is relevant to decide whether a subsystem may be analysed in a computer model or measured in the laboratory independently of the rest or subsystems or not. The two features (subsystem identification and quantification of the degree of coupling) are illustrated by means of numerical examples: plates coupled by means of springs and rooms connected by means of a cavity.

Inflated Uncertainty in Multimodel-Based Regional Climate Projections.

PubMed

Madsen, Marianne Sloth; Langen, Peter L; Boberg, Fredrik; Christensen, Jens Hesselbjerg

2017-11-28

Multimodel ensembles are widely analyzed to estimate the range of future regional climate change projections. For an ensemble of climate models, the result is often portrayed by showing maps of the geographical distribution of the multimodel mean results and associated uncertainties represented by model spread at the grid point scale. Here we use a set of CMIP5 models to show that presenting statistics this way results in an overestimation of the projected range leading to physically implausible patterns of change on global but also on regional scales. We point out that similar inconsistencies occur in impact analyses relying on multimodel information extracted using statistics at the regional scale, for example, when a subset of CMIP models is selected to represent regional model spread. Consequently, the risk of unwanted impacts may be overestimated at larger scales as climate change impacts will never be realized as the worst (or best) case everywhere.

Signal processing applications of massively parallel charge domain computing devices

NASA Technical Reports Server (NTRS)

Fijany, Amir (Inventor); Barhen, Jacob (Inventor); Toomarian, Nikzad (Inventor)

1999-01-01

The present invention is embodied in a charge coupled device (CCD)/charge injection device (CID) architecture capable of performing a Fourier transform by simultaneous matrix vector multiplication (MVM) operations in respective plural CCD/CID arrays in parallel in O(1) steps. For example, in one embodiment, a first CCD/CID array stores charge packets representing a first matrix operator based upon permutations of a Hartley transform and computes the Fourier transform of an incoming vector. A second CCD/CID array stores charge packets representing a second matrix operator based upon different permutations of a Hartley transform and computes the Fourier transform of an incoming vector. The incoming vector is applied to the inputs of the two CCD/CID arrays simultaneously, and the real and imaginary parts of the Fourier transform are produced simultaneously in the time required to perform a single MVM operation in a CCD/CID array.

Low-Dimensional Models for Physiological Systems: Nonlinear Coupling of Gas and Liquid Flows

NASA Astrophysics Data System (ADS)

Staples, A. E.; Oran, E. S.; Boris, J. P.; Kailasanath, K.

2006-11-01

Current computational models of biological organisms focus on the details of a specific component of the organism. For example, very detailed models of the human heart, an aorta, a vein, or part of the respiratory or digestive system, are considered either independently from the rest of the body, or as interacting simply with other systems and components in the body. In actual biological organisms, these components and systems are strongly coupled and interact in complex, nonlinear ways leading to complicated global behavior. Here we describe a low-order computational model of two physiological systems, based loosely on a circulatory and respiratory system. Each system is represented as a one-dimensional fluid system with an interconnected series of mass sources, pumps, valves, and other network components, as appropriate, representing different physical organs and system components. Preliminary results from a first version of this model system are presented.

Learning to File: Reconfiguring Information and Information Work in the Early Twentieth Century.

PubMed

Robertson, Craig

2017-01-01

This article uses textbooks and advertisements to explore the formal and informal ways in which people were introduced to vertical filing in the early twentieth century. Through the privileging of "system" an ideal mode of paperwork emerged in which a clerk could "grasp" information simply by hand without having to understand or comprehend its content. A file clerk's hands and fingers became central to the representation and teaching of filing. In this way, filing offered an example of a distinctly modern form of information work. Filing textbooks sought to enhance dexterity as the rapid handling of paper came to represent information as something that existed in discrete units, in bits that could be easily extracted. Advertisements represented this mode of information work in its ideal form when they frequently erased the worker or reduced him or her to hands, as "instant" filing became "automatic" filing, with the filing cabinet presented as a machine.

Meshfree truncated hierarchical refinement for isogeometric analysis

NASA Astrophysics Data System (ADS)

Atri, H. R.; Shojaee, S.

2018-05-01

In this paper truncated hierarchical B-spline (THB-spline) is coupled with reproducing kernel particle method (RKPM) to blend advantages of the isogeometric analysis and meshfree methods. Since under certain conditions, the isogeometric B-spline and NURBS basis functions are exactly represented by reproducing kernel meshfree shape functions, recursive process of producing isogeometric bases can be omitted. More importantly, a seamless link between meshfree methods and isogeometric analysis can be easily defined which provide an authentic meshfree approach to refine the model locally in isogeometric analysis. This procedure can be accomplished using truncated hierarchical B-splines to construct new bases and adaptively refine them. It is also shown that the THB-RKPM method can provide efficient approximation schemes for numerical simulations and represent a promising performance in adaptive refinement of partial differential equations via isogeometric analysis. The proposed approach for adaptive locally refinement is presented in detail and its effectiveness is investigated through well-known benchmark examples.

Screening Cereals Quality by Electronic Nose: the Example of Mycotoxins Naturally Contaminated Maize and Durum Wheat

NASA Astrophysics Data System (ADS)

Campagnoli, Anna; Dell'Orto, Vittorio; Savoini, Giovanni; Cheli, Federica

2009-05-01

Mycotoxins represent an heterogeneous group of toxic compounds from fungi metabolism. Due to the frequent occurrence of mycotoxins in cereals commodities the develop of cost/effective screening methods represent an important topic to ensure food and feed safety. In the presented study a commercial electronic nose constituted by ten MOS (Metal Oxide Sensors) was applied to verify the possibility of discriminating between mycotoxins contaminated and non-contaminated cereals. The described analytical approach was able to discriminate contaminated and non-contaminated samples both in the case of aflatoxins infected maize and deoxynivalenol infected durum wheat samples. In the case of maize data two sensors from the array revealed a partial relation with the level of aflatoxins. These results could be promising for a further improvement of electronic nose application in order to develop a semi-quantitative screening approach to mycotoxins contamination.

Dispersion relations for a general anisotropic distribution function represented as a sum over Legendre polynomials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shaisultanov, Rashid; Eichler, David

2011-03-15

The dielectric tensor is obtained for a general anisotropic distribution function that is represented as a sum over Legendre polynomials. The result is valid over all of k-space. We obtain growth rates for the Weibel instability for some basic examples of distribution functions.

Clay Mask Workshop

ERIC Educational Resources Information Center

Gamble, David L.

2012-01-01

Masks can represent so many things, such as emotions (happy, sad, fearful) and power. The familiar "comedy and tragedy" masks, derived from ancient Greek theater, are just one example from mask history. Death masks from the ancient Egyptians influenced the ancient Romans into creating similar masks for their departed. Masks can represent many…

Representing and Inferring Visual Perceptual Skills in Dermatological Image Understanding

ERIC Educational Resources Information Center

Li, Rui

2013-01-01

Experts have a remarkable capability of locating, perceptually organizing, identifying, and categorizing objects in images specific to their domains of expertise. Eliciting and representing their visual strategies and some aspects of domain knowledge will benefit a wide range of studies and applications. For example, image understanding may be…

Research on Infancy of Special Relevance for Mental Health. Matrix No. 11A.

ERIC Educational Resources Information Center

Provence, Sally

Research relevant to planning and practice in the area of infant mental health is discussed in this paper. First, three examples of research approaches that reflect current attitudes are given. The first example represents those studies in which there is an effort to closely coordinate physiological and behavioral studies. The second example…

Collecting and analyzing qualitative data: Hermeneutic principles, methods and case examples

Treesearch

Michael E. Patterson; Daniel R. Williams

2002-01-01

Over the past three decades, the use of qualitative research methods has become commonplace in social science as a whole and increasingly represented in tourism and recrearion research. In tourism, for example, Markwell and Basche (1998) recently noted the emergence of a pluralistic perspective on science and the growth of research employing qualitative frameworks....

TIGER: the universal biosensor

NASA Astrophysics Data System (ADS)

Hofstadler, Steven A.; Sampath, Rangarajan; Blyn, Lawrence B.; Eshoo, Mark W.; Hall, Thomas A.; Jiang, Yun; Drader, Jared J.; Hannis, James C.; Sannes-Lowery, Kristin A.; Cummins, Lendell L.; Libby, Brian; Walcott, Demetrius J.; Schink, Amy; Massire, Christian; Ranken, Raymond; Gutierrez, Jose; Manalili, Sheri; Ivy, Cristina; Melton, Rachael; Levene, Harold; Barrett-Wilt, Greg; Li, Feng; Zapp, Vanessa; White, Neill; Samant, Vivek; McNeil, John A.; Knize, Duane; Robbins, David; Rudnick, Karl; Desai, Anjali; Moradi, Emily; Ecker, David J.

2005-03-01

In this work, we describe a strategy for the detection and characterization of microorganisms associated with a potential biological warfare attack or a natural outbreak of an emerging infectious disease. This approach, termed TIGER (Triangulation Identification for the Genetic Evaluation of Risks), relies on mass spectrometry-derived base composition signatures obtained from PCR amplification of broadly conserved regions of the microbial genome(s) in a sample. The sample can be derived from air filtration devices, clinical samples, or other sources. Core to this approach are "intelligent PCR primers" that target broadly conserved regions of microbial genomes that flank variable regions. This approach requires that high-performance mass measurements be made on PCR products in the 80-140 bp size range in a high-throughput, robust modality. As will be demonstrated, the concept is equally applicable to bacteria and viruses and could be further applied to fungi and protozoa. In addition to describing the fundamental strategy of this approach, several specific examples of TIGER are presented that illustrate the impact this approach could have on the way biological weapons attacks are detected and the way that the etiologies of infectious diseases are determined. The first example illustrates how any bacterial species might be identified, using Bacillus anthracis as the test agent. The second example demonstrates how DNA-genome viruses are identified using five members of Poxviridae family, whose members includes Variola virus, the agent responsible for smallpox. The third example demonstrates how RNA-genome viruses are identified using the Alphaviruses (VEE, WEE, and EEE) as representative examples. These examples illustrate how the TIGER technology can be applied to create a universal identification strategy for all pathogens, including those that infect humans, livestock, and plants.

Variability of floods, droughts and windstorms over the past 500 years in Central Europe based on documentary and instrumental data

NASA Astrophysics Data System (ADS)

Brazdil, Rudolf

2016-04-01

Hydrological and meteorological extremes (HMEs) in Central Europe during the past 500 years can be reconstructed based on instrumental and documentary data. Documentary data about weather and related phenomena represent the basic source of information for historical climatology and hydrology, dealing with reconstruction of past climate and HMEs, their perception and impacts on human society. The paper presents the basic distribution of documentary data on (i) direct descriptions of HMEs and their proxies on the one hand and on (ii) individual and institutional data sources on the other. Several groups of documentary evidence such as narrative written records (annals, chronicles, memoirs), visual daily weather records, official and personal correspondence, special prints, financial and economic records (with particular attention to taxation data), newspapers, pictorial documentation, chronograms, epigraphic data, early instrumental observations, early scientific papers and communications are demonstrated with respect to extraction of information about HMEs, which concerns usually of their occurrence, severity, seasonality, meteorological causes, perception and human impacts. The paper further presents the analysis of 500-year variability of floods, droughts and windstorms on the base of series, created by combination of documentary and instrumental data. Results, advantages and drawbacks of such approach are documented on the examples from the Czech Lands. The analysis of floods concentrates on the River Vltava (Prague) and the River Elbe (Děčín) which show the highest frequency of floods occurring in the 19th century (mainly of winter synoptic type) and in the second half of the 16th century (summer synoptic type). Reported are also the most disastrous floods (August 1501, March and August 1598, February 1655, June 1675, February 1784, March 1845, February 1862, September 1890, August 2002) and the European context of floods in the severe winter 1783/84. Drought fluctuations in the Czech Lands are represented by the chronology of drought frequency on the one hand and by the reconstructed series of drought indices (SPI, SPEI, Z-Index and PDSI) on the other. Wind extremes are documented on the example of Czech windstorm chronology derived from documentary data (including tornadoes) with an example of "windstorm of the 18th century" (20-21 December 1740). Finally, scientific potential and perspectives of historical-climatological (historical-hydrological) research of HMEs are presented.

E-Learning for Rare Diseases: An Example Using Fabry Disease.

PubMed

Cimmaruta, Chiara; Liguori, Ludovica; Monticelli, Maria; Andreotti, Giuseppina; Citro, Valentina

2017-09-24

Rare diseases represent a challenge for physicians because patients are rarely seen, and they can manifest with symptoms similar to those of common diseases. In this work, genetic confirmation of diagnosis is derived from DNA sequencing. We present a tutorial for the molecular analysis of a rare disease using Fabry disease as an example. An exonic sequence derived from a hypothetical male patient was matched against human reference data using a genome browser. The missense mutation was identified by running BlastX, and information on the affected protein was retrieved from the database UniProt. The pathogenic nature of the mutation was assessed with PolyPhen-2. Disease-specific databases were used to assess whether the missense mutation led to a severe phenotype, and whether pharmacological therapy was an option. An inexpensive bioinformatics approach is presented to get the reader acquainted with the diagnosis of Fabry disease. The reader is introduced to the field of pharmacological chaperones, a therapeutic approach that can be applied only to certain Fabry genotypes. The principle underlying the analysis of exome sequencing can be explained in simple terms using web applications and databases which facilitate diagnosis and therapeutic choices.

Measurement of psychological disorders using cognitive diagnosis models.

PubMed

Templin, Jonathan L; Henson, Robert A

2006-09-01

Cognitive diagnosis models are constrained (multiple classification) latent class models that characterize the relationship of questionnaire responses to a set of dichotomous latent variables. Having emanated from educational measurement, several aspects of such models seem well suited to use in psychological assessment and diagnosis. This article presents the development of a new cognitive diagnosis model for use in psychological assessment--the DINO (deterministic input; noisy "or" gate) model--which, as an illustrative example, is applied to evaluate and diagnose pathological gamblers. As part of this example, a demonstration of the estimates obtained by cognitive diagnosis models is provided. Such estimates include the probability an individual meets each of a set of dichotomous Diagnostic and Statistical Manual of Mental Disorders (text revision [DSM-IV-TR]; American Psychiatric Association, 2000) criteria, resulting in an estimate of the probability an individual meets the DSM-IV-TR definition for being a pathological gambler. Furthermore, a demonstration of how the hypothesized underlying factors contributing to pathological gambling can be measured with the DINO model is presented, through use of a covariance structure model for the tetrachoric correlation matrix of the dichotomous latent variables representing DSM-IV-TR criteria. Copyright 2006 APA

A series of PDB-related databanks for everyday needs.

PubMed

Touw, Wouter G; Baakman, Coos; Black, Jon; te Beek, Tim A H; Krieger, E; Joosten, Robbie P; Vriend, Gert

2015-01-01

We present a series of databanks (http://swift.cmbi.ru.nl/gv/facilities/) that hold information that is computationally derived from Protein Data Bank (PDB) entries and that might augment macromolecular structure studies. These derived databanks run parallel to the PDB, i.e. they have one entry per PDB entry. Several of the well-established databanks such as HSSP, PDBREPORT and PDB_REDO have been updated and/or improved. The software that creates the DSSP databank, for example, has been rewritten to better cope with π-helices. A large number of databanks have been added to aid computational structural biology; some examples are lists of residues that make crystal contacts, lists of contacting residues using a series of contact definitions or lists of residue accessibilities. PDB files are not the optimal presentation of the underlying data for many studies. We therefore made a series of databanks that hold PDB files in an easier to use or more consistent representation. The BDB databank holds X-ray PDB files with consistently represented B-factors. We also added several visualization tools to aid the users of our databanks. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.

Flowers of Cypripedium fargesii (Orchidaceae) fool flat-footed flies (Platypezidae) by faking fungus-infected foliage

PubMed Central

Ren, Zong-Xin; Li, De-Zhu; Bernhardt, Peter; Wang, Hong

2011-01-01

Charles Darwin was fascinated by the orchid–pollinator interactions, but he did not realize that many orchid species are pollinated by deceit. Cypripedium, a model lineage of nonrewarding orchid flowers, is pollinated primarily by bees. Here we present both an example of floral mimesis of fungus-infected foliage in orchids and an example of flat-footed flies (Agathomyia sp.; Platypezidae) as pollen vectors for angiosperms. Cypripedium fargesii is a nectarless, terrestrial, endangered orchid from southwestern China that requires cross-pollination to produce the maximum number of viable embryos. All insects caught entering or leaving the labellum sac were Agathomyia sp. carrying conidia of Cladosporium sp. on their mouthparts and legs, suggesting mycophagy. Blackish hairy spots on the upper surface of foliage may imitate black mold spots, serving as short-term visual lures. Some odor molecules also associated with Cladosporium cultures were isolated in the floral scent. Mimesis of fungus-infected foliage probably represents an overlooked but important option in angiosperm diversification, because there are three to five more Cypripedium spp. in southwestern China with the same mode of floral presentation and black-spotted hairy leaves. PMID:21502502

Flowers of Cypripedium fargesii (Orchidaceae) fool flat-footed flies (Platypezidae) by faking fungus-infected foliage.

PubMed

Ren, Zong-Xin; Li, De-Zhu; Bernhardt, Peter; Wang, Hong

2011-05-03

Charles Darwin was fascinated by the orchid-pollinator interactions, but he did not realize that many orchid species are pollinated by deceit. Cypripedium, a model lineage of nonrewarding orchid flowers, is pollinated primarily by bees. Here we present both an example of floral mimesis of fungus-infected foliage in orchids and an example of flat-footed flies (Agathomyia sp.; Platypezidae) as pollen vectors for angiosperms. Cypripedium fargesii is a nectarless, terrestrial, endangered orchid from southwestern China that requires cross-pollination to produce the maximum number of viable embryos. All insects caught entering or leaving the labellum sac were Agathomyia sp. carrying conidia of Cladosporium sp. on their mouthparts and legs, suggesting mycophagy. Blackish hairy spots on the upper surface of foliage may imitate black mold spots, serving as short-term visual lures. Some odor molecules also associated with Cladosporium cultures were isolated in the floral scent. Mimesis of fungus-infected foliage probably represents an overlooked but important option in angiosperm diversification, because there are three to five more Cypripedium spp. in southwestern China with the same mode of floral presentation and black-spotted hairy leaves.

Data Interactive Publications Revisited

NASA Astrophysics Data System (ADS)

Domenico, B.; Weber, W. J.

2011-12-01

A few years back, the authors presented examples of online documents that allowed the reader to interact directly with datasets, but there were limitations that restricted the interaction to specific desktop analysis and display tools that were not generally available to all readers of the documents. Recent advances in web service technology and related standards are making it possible to develop systems for publishing online documents that enable readers to access, analyze, and display the data discussed in the publication from the perspective and in the manner from which the author wants it to be represented. By clicking on embedded links, the reader accesses not only the usual textual information in a publication, but also data residing on a local or remote web server as well as a set of processing tools for analyzing and displaying the data. With the option of having the analysis and display processing provided on the server, there are now a broader set of possibilities on the client side where the reader can interact with the data via a thin web client, a rich desktop application, or a mobile platform "app." The presentation will outline the architecture of data interactive publications along with illustrative examples.

Creating Qungasvik (A Yup’ik Intervention “Toolbox”): Case Examples from a Community-Developed and Culturally-Driven Intervention

PubMed Central

Rasmus, Stacy M.; Charles, Billy; Mohatt, Gerald V.

2014-01-01

This paper describes the development of a Yup’ik Alaska Native approach to suicide and alcohol abuse prevention that resulted in the creation of the Qungasvik, a toolbox promoting reasons for life and sobriety among youth. The Qungasvik is made up of thirty-six modules that function as cultural scripts for creating experiences in Yup’ik communities that build strengths and protection against suicide and alcohol abuse. The Qungasvik manual represents the results of a community based participatory research intervention development process grounded in culture and local process, and nurtured through a syncretic blending of Indigenous and Western theories and practices. This paper will provide a description of the collaborative steps taken at the community-level to develop the intervention modules. This process involved university researchers and community members coming together and drawing from multiple sources of data and knowledge to inform the development of prevention activities addressing youth suicide and alcohol abuse. We will present case examples describing the development of three keystone modules; Qasgiq (The Men’s House), Yup’ik Kinship Terms, and Surviving Your Feelings. These modules each are representative of the process that the community co-researcher team took to develop and implement protective experiences that: (1) create supportive community, (2) strengthen families, and (3) give individuals tools to be healthy and strong. PMID:24764018

Seeing through the Smoke: A collaborative, multidisciplinary effort to address the interplay between wildfire, climate, air quality, and health

NASA Astrophysics Data System (ADS)

Brey, S. J.; Fischer, E. V.; Pierce, J. R.; Ford, B.; Lassman, W.; Pfister, G.; Volckens, J.; Gan, R.; Magzamen, S.; Barnes, E. A.

2015-12-01

Exposure to wildfire smoke plumes represents an episodic, uncertain, and potentially growing threat to public health in the western United States. The area burned by wildfires in this region has increased over recent decades, and the future of fires within this region is largely unknown. Future fire emissions are intimately linked to future meteorological conditions, which are uncertain due to the variability of climate model outputs and differences between representative concentration pathways (RCP) scenarios. We know that exposure to wildfire smoke is harmful, particularly for vulnerable populations. However the literature on the heath effects of wildfire smoke exposure is thin, particularly when compared to the depth of information we have on the effects of exposure to smoke of anthropogenic origin. We are exploring the relationships between climate, fires, air quality and public health through multiple interdisciplinary collaborations. We will present several examples from these projects including 1) an analysis of the influence of fire on ozone abundances over the United States, and 2) efforts to use a high-resolution weather forecasting model to nail down exposure within specific smoke plumes. We will also highlight how our team works together. This discussion will include examples of the university structure that facilitates our current collaborations, and the lessons we have learned by seeking stakeholder input to make our science more useful.

Creating Qungasvik (a Yup'ik intervention "toolbox"): case examples from a community-developed and culturally-driven intervention.

PubMed

Rasmus, Stacy M; Charles, Billy; Mohatt, Gerald V

2014-09-01

This paper describes the development of a Yup'ik Alaska Native approach to suicide and alcohol abuse prevention that resulted in the creation of the Qungasvik, a toolbox promoting reasons for life and sobriety among youth. The Qungasvik is made up of thirty-six modules that function as cultural scripts for creating experiences in Yup'ik communities that build strengths and protection against suicide and alcohol abuse. The Qungasvik manual represents the results of a community based participatory research intervention development process grounded in culture and local process, and nurtured through a syncretic blending of Indigenous and Western theories and practices. This paper will provide a description of the collaborative steps taken at the community-level to develop the intervention modules. This process involved university researchers and community members coming together and drawing from multiple sources of data and knowledge to inform the development of prevention activities addressing youth suicide and alcohol abuse. We will present case examples describing the development of three keystone modules; Qasgiq (The Men's House), Yup'ik Kinship Terms, and Surviving Your Feelings. These modules each are representative of the process that the community co-researcher team took to develop and implement protective experiences that: (1) create supportive community, (2) strengthen families, and (3) give individuals tools to be healthy and strong.

Mission Simulation of Space Lidar Measurements for Seasonal and Regional CO2 Variations

NASA Technical Reports Server (NTRS)

Kawa, Stephan; Collatz, G. J.; Mao, J.; Abshire, J. B.; Sun, X.; Weaver, C. J.

2010-01-01

Results of mission simulation studies are presented for a laser-based atmospheric [82 sounder. The simulations are based on real-time carbon cycle process modeling and data analysis. The mission concept corresponds to the Active Sensing of [82 over Nights, Days, and Seasons (ASCENDS) recommended by the US National Academy of Sciences Decadal Survey of Earth Science and Applications from Space. One prerequisite for meaningful quantitative sensor evaluation is realistic CO2 process modeling across a wide range of scales, i.e., does the model have representative spatial and temporal gradients? Examples of model comparison with data will be shown. Another requirement is a relatively complete description of the atmospheric and surface state, which we have obtained from meteorological data assimilation and satellite measurements from MODIS and [ALIPS0. We use radiative transfer model calculations, an instrument model with representative errors ' and a simple retrieval approach to complete the cycle from "nature" run to "pseudo-data" CO2, Several mission and instrument configuration options are examined/ and the sensitivity to key design variables is shown. We use the simulation framework to demonstrate that within reasonable technological assumptions for the system performance, relatively high measurement precision can be obtained, but errors depend strongly on environmental conditions as well as instrument specifications. Examples are also shown of how the resulting pseudo - measurements might be used to address key carbon cycle science questions.

Determining the relative importance of figures in journal articles to find representative images

NASA Astrophysics Data System (ADS)

Müller, Henning; Foncubierta-Rodríguez, Antonio; Lin, Chang; Eggel, Ivan

2013-03-01

When physicians are searching for articles in the medical literature, images of the articles can help determining relevance of the article content for a specific information need. The visual image representation can be an advantage in effectiveness (quality of found articles) and also in efficiency (speed of determining relevance or irrelevance) as many articles can likely be excluded much quicker by looking at a few representative images. In domains such as medical information retrieval, allowing to determine relevance quickly and accurately is an important criterion. This becomes even more important when small interfaces are used as it is frequently the case on mobile phones and tablets to access scientific data whenever information needs arise. In scientific articles many figures are used and particularly in the biomedical literature only a subset may be relevant for determining the relevance of a specific article to an information need. In many cases clinical images can be seen as more important for visual appearance than graphs or histograms that require looking at the context for interpretation. To get a clearer idea of image relevance in articles, a user test with a physician was performed who classified images of biomedical research articles into categories of importance that can subsequently be used to evaluate algorithms that automatically select images as representative examples. The manual sorting of images of 50 journal articles of BioMedCentral with each containing more than 8 figures by importance also allows to derive several rules that determine how to choose images and how to develop algorithms for choosing the most representative images of specific texts. This article describes the user tests and can be a first important step to evaluate automatic tools to select representative images for representing articles and potentially also images in other contexts, for example when representing patient records or other medical concepts when selecting images to represent RadLex terms in tutorials or interactive interfaces for example. This can help to make the image retrieval process more efficient and effective for physicians.

The Variable Grid Method, an Approach for the Simultaneous Visualization and Assessment of Spatial Trends and Uncertainty

NASA Astrophysics Data System (ADS)

Rose, K.; Glosser, D.; Bauer, J. R.; Barkhurst, A.

2015-12-01

The products of spatial analyses that leverage the interpolation of sparse, point data to represent continuous phenomena are often presented without clear explanations of the uncertainty associated with the interpolated values. As a result, there is frequently insufficient information provided to effectively support advanced computational analyses and individual research and policy decisions utilizing these results. This highlights the need for a reliable approach capable of quantitatively producing and communicating spatial data analyses and their inherent uncertainties for a broad range of uses. To address this need, we have developed the Variable Grid Method (VGM), and associated Python tool, which is a flexible approach that can be applied to a variety of analyses and use case scenarios where users need a method to effectively study, evaluate, and analyze spatial trends and patterns while communicating the uncertainty in the underlying spatial datasets. The VGM outputs a simultaneous visualization representative of the spatial data analyses and quantification of underlying uncertainties, which can be calculated using data related to sample density, sample variance, interpolation error, uncertainty calculated from multiple simulations, etc. We will present examples of our research utilizing the VGM to quantify key spatial trends and patterns for subsurface data interpolations and their uncertainties and leverage these results to evaluate storage estimates and potential impacts associated with underground injection for CO2 storage and unconventional resource production and development. The insights provided by these examples identify how the VGM can provide critical information about the relationship between uncertainty and spatial data that is necessary to better support their use in advance computation analyses and informing research, management and policy decisions.

The metallogenic role of east-west fracture zones in South America with regard to the motion of lithospheric plates (with an example from Brazil)

USGS Publications Warehouse

Kutina, J.; Carter, William D.; Lopez, F.X.

1978-01-01

The role of east-west fracture zones in South America is discussed with regard to global fracturing and the motion of lithospheric plates. A set of major NW-trending lineaments has been derived which show a tendency to be spaced equidistantly and may correspond to a set of east-west fractures in the "pre-drift" position of the South American plate. Statistical analysis of linears in the ERTS-mosaics shows that NW-fractures are also among the most important ones in the Andes region, suggesting that the above major lineaments extend into the basement of the Andes. Some of the old major fractures, trending east-west in the present orientation of South America, are discussed and their NE orientation in the pre-drift position of the plate is considered. An example of structural control of ore deposition in the Brazilian Shield is presented, using the maps of the RADAM Project. It is concluded that the small tin-bearing granitic bodies concentrated in the region of Sao Felix do Xingu in the state of Para represent upper parts of an unexposed granitoid massif which is controlled by the intersection of a major east-west fracture zone probably represents westward extension of the Patos Lineament of the easternmost part of Brazil, connected with the east-west fracture zone of the Para state through the basement of the Maranhao Basin (Sineclise do Maranhao-Piaui). It is expected that the proposed "Patos-Para Lineament" extends further westward and may similarly control, at intersections with fractures of other trends, some mineralization centers in the western part of the state of Para and in the state of Amazonas.

How the Frailty Index May Support the Allocation of Health Care Resources: An Example From the INCUR Study.

PubMed

Cesari, Matteo; Costa, Nadege; Hoogendijk, Emiel O; Vellas, Bruno; Canevelli, Marco; Pérez-Zepeda, Mario Ulises

2016-05-01

The Frailty Index (FI), proposed by Rockwood and Mitniski, measures the deficits accumulation occurring with aging, and can be generated from the results of a comprehensive clinical assessment. Its construct (based on pure arithmetical assumptions) may represent a unique feature for supporting unbiased comparisons among clinical facilities/services. To propose an example depicting how the FI may support health economic evaluations and provide insights for public health. Observational study. Nine nursing homes participating in the "Incidence of pNeumonia and related ConseqUences in nursing home Residents" (INCUR) study. A sample of 345 older persons living in nursing homes. A 30-item FI was generated from clinical data retrieved from medical charts. Health care expenditures that occurred over 12 months of follow-up for each participant were obtained from the Caisse Primaire d'Assurance Maladie. Descriptive analyses describing the relationships between the FI of residents with the annual health care expenditures according to nursing home are presented. Mean age of the study sample was 86.0 (SD 7.9) years. The median annual cost per patient was 27,717.75 (interquartile range, IQR 25,917.60-32,118.02) Euros. The median FI was 0.33 (IQR 0.27-0.43). Results are graphically presented to highlight clinical and economic differences across nursing homes, so as to identify potential discrepancies between clinical burden and consumed resources. In this article, an example on how the FI may support health economic analyses and promote an improved allocation of healthcare resources is presented. Copyright © 2016 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

Probabilistic Multi-Factor Interaction Model for Complex Material Behavior

NASA Technical Reports Server (NTRS)

Abumeri, Galib H.; Chamis, Christos C.

2010-01-01

Complex material behavior is represented by a single equation of product form to account for interaction among the various factors. The factors are selected by the physics of the problem and the environment that the model is to represent. For example, different factors will be required for each to represent temperature, moisture, erosion, corrosion, etc. It is important that the equation represent the physics of the behavior in its entirety accurately. The Multi-Factor Interaction Model (MFIM) is used to evaluate the divot weight (foam weight ejected) from the external launch tanks. The multi-factor has sufficient degrees of freedom to evaluate a large number of factors that may contribute to the divot ejection. It also accommodates all interactions by its product form. Each factor has an exponent that satisfies only two points - the initial and final points. The exponent describes a monotonic path from the initial condition to the final. The exponent values are selected so that the described path makes sense in the absence of experimental data. In the present investigation, the data used were obtained by testing simulated specimens in launching conditions. Results show that the MFIM is an effective method of describing the divot weight ejected under the conditions investigated. The problem lies in how to represent the divot weight with a single equation. A unique solution to this problem is a multi-factor equation of product form. Each factor is of the following form (1 xi/xf)ei, where xi is the initial value, usually at ambient conditions, xf the final value, and ei the exponent that makes the curve represented unimodal that meets the initial and final values. The exponents are either evaluated by test data or by technical judgment. A minor disadvantage may be the selection of exponents in the absence of any empirical data. This form has been used successfully in describing the foam ejected in simulated space environmental conditions. Seven factors were required to represent the ejected foam. The exponents were evaluated by least squares method from experimental data. The equation is used and it can represent multiple factors in other problems as well; for example, evaluation of fatigue life, creep life, fracture toughness, and structural fracture, as well as optimization functions. The software is rather simplistic. Required inputs are initial value, final value, and an exponent for each factor. The number of factors is open-ended. The value is updated as each factor is evaluated. If a factor goes to zero, the previous value is used in the evaluation.

Can it ever be better never to have existed at all? Person-based consequentialism and a new repugnant conclusion.

PubMed

Roberts, Melinda A

2003-01-01

Broome and others have argued that it makes no sense, or at least that it cannot be true, to say that it is better for a given person that he or she exist than not. That argument can be understood to suggest that, likewise, it makes no sense, or at least that it cannot be true, to say that it is worse for a given person that he or she exist than that he or she never have existed at all. This argument is of critical importance to the question of whether consequentialist theory should take a traditional, aggregative form or a less conventional, person-affecting, or person-based form. I believe that, potentially, the argument represents a far more serious threat to the person-based approach than does, for example, Parfit's two medical programmes example. Parfit's example nicely illuminates the distinction between aggregative and person-based approaches and raises important questions. But the example--though not, I think, by Parfit--is sometimes pressed into service as a full-fledged counterexample against the person-based approach. As such, I argue, the example is not persuasive. In contrast, the Broomeian argument, if correct, is definitive. For that argument relies on certain metaphysical assumptions and various uncontroversial normative claims--and hence nicely avoids putting into play the controversial normative claims that lie at the very heart of the debate. The purpose of the present paper, then, is to evaluate the Broomeian argument. I argue that this potentially definitive challenge to a person-based approach does not in fact succeed.

Awesome Mess or Good Compromise? Spelling, Linguistics, and Middle Schoolers

ERIC Educational Resources Information Center

Meyer, Jim

2008-01-01

The stereotypical view of English spelling as an awesome mess is no longer widely held by linguists. That view assumes that spelling should represent pronunciation directly and simply. Instead, spelling is currently understood as representing a more abstract level of language as well as reflecting etymology. Examples from a middle school spelling…

Recreation in the United States. National Historic Landmark Theme Study.

ERIC Educational Resources Information Center

Charleton, James H.

This report examines a number of outstanding and illustrative examples of a broad range of properties representing recreational activities that suggest themselves for possible National Historic Landmark recognition. The properties described in the study have been selected to represent places and activities that have had a major impact on American…

Semantic Data Integration and Knowledge Management to Represent Biological Network Associations.

PubMed

Losko, Sascha; Heumann, Klaus

2017-01-01

The vast quantities of information generated by academic and industrial research groups are reflected in a rapidly growing body of scientific literature and exponentially expanding resources of formalized data, including experimental data, originating from a multitude of "-omics" platforms, phenotype information, and clinical data. For bioinformatics, the challenge remains to structure this information so that scientists can identify relevant information, to integrate this information as specific "knowledge bases," and to formalize this knowledge across multiple scientific domains to facilitate hypothesis generation and validation. Here we report on progress made in building a generic knowledge management environment capable of representing and mining both explicit and implicit knowledge and, thus, generating new knowledge. Risk management in drug discovery and clinical research is used as a typical example to illustrate this approach. In this chapter we introduce techniques and concepts (such as ontologies, semantic objects, typed relationships, contexts, graphs, and information layers) that are used to represent complex biomedical networks. The BioXM™ Knowledge Management Environment is used as an example to demonstrate how a domain such as oncology is represented and how this representation is utilized for research.

Classification

NASA Astrophysics Data System (ADS)

Oza, Nikunj

2012-03-01

A supervised learning task involves constructing a mapping from input data (normally described by several features) to the appropriate outputs. A set of training examples— examples with known output values—is used by a learning algorithm to generate a model. This model is intended to approximate the mapping between the inputs and outputs. This model can be used to generate predicted outputs for inputs that have not been seen before. Within supervised learning, one type of task is a classification learning task, in which each output is one or more classes to which the input belongs. For example, we may have data consisting of observations of sunspots. In a classification learning task, our goal may be to learn to classify sunspots into one of several types. Each example may correspond to one candidate sunspot with various measurements or just an image. A learning algorithm would use the supplied examples to generate a model that approximates the mapping between each supplied set of measurements and the type of sunspot. This model can then be used to classify previously unseen sunspots based on the candidate’s measurements. The generalization performance of a learned model (how closely the target outputs and the model’s predicted outputs agree for patterns that have not been presented to the learning algorithm) would provide an indication of how well the model has learned the desired mapping. More formally, a classification learning algorithm L takes a training set T as its input. The training set consists of |T| examples or instances. It is assumed that there is a probability distribution D from which all training examples are drawn independently—that is, all the training examples are independently and identically distributed (i.i.d.). The ith training example is of the form (x_i, y_i), where x_i is a vector of values of several features and y_i represents the class to be predicted.* In the sunspot classification example given above, each training example would represent one sunspot’s classification (y_i) and the corresponding set of measurements (x_i). The output of a supervised learning algorithm is a model h that approximates the unknown mapping from the inputs to the outputs. In our example, h would map from the sunspot measurements to the type of sunspot. We may have a test set S—a set of examples not used in training that we use to test how well the model h predicts the outputs on new examples. Just as with the examples in T, the examples in S are assumed to be independent and identically distributed (i.i.d.) draws from the distribution D. We measure the error of h on the test set as the proportion of test cases that h misclassifies: 1/|S| Sigma(x,y union S)[I(h(x)!= y)] where I(v) is the indicator function—it returns 1 if v is true and 0 otherwise. In our sunspot classification example, we would identify additional examples of sunspots that were not used in generating the model, and use these to determine how accurate the model is—the fraction of the test samples that the model classifies correctly. An example of a classification model is the decision tree shown in Figure 23.1. We will discuss the decision tree learning algorithm in more detail later—for now, we assume that, given a training set with examples of sunspots, this decision tree is derived. This can be used to classify previously unseen examples of sunpots. For example, if a new sunspot’s inputs indicate that its "Group Length" is in the range 10-15, then the decision tree would classify the sunspot as being of type “E,” whereas if the "Group Length" is "NULL," the "Magnetic Type" is "bipolar," and the "Penumbra" is "rudimentary," then it would be classified as type "C." In this chapter, we will add to the above description of classification problems. We will discuss decision trees and several other classification models. In particular, we will discuss the learning algorithms that generate these classification models, how to use them to classify new examples, and the strengths and weaknesses of these models. We will end with pointers to further reading on classification methods applied to astronomy data.

Writing Abstracts for MLIS Research Proposals Using Worked Examples: An Innovative Approach to Teaching the Elements of Research Design

ERIC Educational Resources Information Center

Ondrusek, Anita L.; Thiele, Harold E.; Yang, Changwoo

2014-01-01

The authors examined abstracts written by graduate students for their research proposals as a requirement for a course in research methods in a distance learning MLIS program. The students learned under three instructional conditions that involved varying levels of access to worked examples created from abstracts representing research in the LIS…

Neurophysiology and neural engineering: a review.

PubMed

Prochazka, Arthur

2017-08-01

Neurophysiology is the branch of physiology concerned with understanding the function of neural systems. Neural engineering (also known as neuroengineering) is a discipline within biomedical engineering that uses engineering techniques to understand, repair, replace, enhance, or otherwise exploit the properties and functions of neural systems. In most cases neural engineering involves the development of an interface between electronic devices and living neural tissue. This review describes the origins of neural engineering, the explosive development of methods and devices commencing in the late 1950s, and the present-day devices that have resulted. The barriers to interfacing electronic devices with living neural tissues are many and varied, and consequently there have been numerous stops and starts along the way. Representative examples are discussed. None of this could have happened without a basic understanding of the relevant neurophysiology. I also consider examples of how neural engineering is repaying the debt to basic neurophysiology with new knowledge and insight. Copyright © 2017 the American Physiological Society.

How Statisticians Speak Risk

DOE Office of Scientific and Technical Information (OSTI.GOV)

Redus, K.S.

2007-07-01

The foundation of statistics deals with (a) how to measure and collect data and (b) how to identify models using estimates of statistical parameters derived from the data. Risk is a term used by the statistical community and those that employ statistics to express the results of a statistically based study. Statistical risk is represented as a probability that, for example, a statistical model is sufficient to describe a data set; but, risk is also interpreted as a measure of worth of one alternative when compared to another. The common thread of any risk-based problem is the combination of (a)more » the chance an event will occur, with (b) the value of the event. This paper presents an introduction to, and some examples of, statistical risk-based decision making from a quantitative, visual, and linguistic sense. This should help in understanding areas of radioactive waste management that can be suitably expressed using statistical risk and vice-versa. (authors)« less

Unapparent Information Revelation: Text Mining for Counterterrorism

NASA Astrophysics Data System (ADS)

Srihari, Rohini K.

Unapparent information revelation (UIR) is a special case of text mining that focuses on detecting possible links between concepts across multiple text documents by generating an evidence trail explaining the connection. A traditional search involving, for example, two or more person names will attempt to find documents mentioning both these individuals. This research focuses on a different interpretation of such a query: what is the best evidence trail across documents that explains a connection between these individuals? For example, all may be good golfers. A generalization of this task involves query terms representing general concepts (e.g. indictment, foreign policy). Previous approaches to this problem have focused on graph mining involving hyperlinked documents, and link analysis exploiting named entities. A new robust framework is presented, based on (i) generating concept chain graphs, a hybrid content representation, (ii) performing graph matching to select candidate subgraphs, and (iii) subsequently using graphical models to validate hypotheses using ranked evidence trails. We adapt the DUC data set for cross-document summarization to evaluate evidence trails generated by this approach

Generic Airplane Model Concept and Four Specific Models Developed for Use in Piloted Simulation Studies

NASA Technical Reports Server (NTRS)

Hoffler, Keith D.; Fears, Scott P.; Carzoo, Susan W.

1997-01-01

A generic airplane model concept was developed to allow configurations with various agility, performance, handling qualities, and pilot vehicle interface to be generated rapidly for piloted simulation studies. The simple concept allows stick shaping and various stick command types or modes to drive an airplane with both linear and nonlinear components. Output from the stick shaping goes to linear models or a series of linear models that can represent an entire flight envelope. The generic model also has provisions for control power limitations, a nonlinear feature. Therefore, departures from controlled flight are possible. Note that only loss of control is modeled, the generic airplane does not accurately model post departure phenomenon. The model concept is presented herein, along with four example airplanes. Agility was varied across the four example airplanes without altering specific excess energy or significantly altering handling qualities. A new feedback scheme to provide angle-of-attack cueing to the pilot, while using a pitch rate command system, was implemented and tested.

[Medically compromised patients in the dental office: demographics and progress in health care].

PubMed

Al-Nawas, B; Grötz, K A

2011-09-01

Due to changing demographics in our society, there are an increasing number of patients with risk factors presenting for dental care. Unfortunately valid screening instruments to identify these patients are lacking. Especially in elderly patients, there is often an association between the high number of prescribed medications and oral symptoms. Using supportive therapy in oncology (e.g., radio(chemo)therapy) as an example, the role of modern dentistry and its interaction with general medicine is illustrated. Modern substances, e.g., antiangiogenetics, with still unknown side effects represent challenging new developments in the field of oral medicine. Even with some examples of positive representation of patients with risk factors in the health systems, e.g., § 28 SGB V, it is clear that the pressure on the costs in the health systems leads to an undertreatment of patients with risk factors. Only by adapting dental and postgraduate training with respect to these aspects, together with better financial reimbursement of the additional efforts, will this trend be overcome.

"Observing" the Circumnuclear Stars and Gas in Disk Galaxy Simulations

NASA Astrophysics Data System (ADS)

Cook, Angela; Hicks, Erin K. S.

2018-06-01

We present simulations based on theoretical models of common disk processes designed to represent potential inflow observed within the central 500 pc of local Seyfert galaxies. Mock observations of these n-body plus smoothed particle hydrodynamical simulations provide the conceptual framework in which to identify the driving inflow mechanism, for example nuclear bars, and to quantify to the inflow based on observable properties. From these mock observations the azimuthal average of the flux distribution, velocity dispersion, and velocity of both the stars and interstellar medium on scales of 50pc have been measured at a range of inclinations angles. A comparison of the simulated disk galaxies with these observed azimuthal averages in 40 Seyfert galaxies measured as part of the KONA (Keck OSIRIS Nearby AGN) survey will be presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buzzi, M.; Vaz, C. A. F.; Raabe, J.

Manipulating magnetisation by the application of an electric field in magnetoelectric multiferroics represents a timely issue due to the potential applications in low power electronics and the novel physics involved. Thanks to its element sensitivity and high spatial resolution, X-ray photoemission electron microscopy is a uniquely suited technique for the investigation of magnetoelectric coupling in multiferroic materials. In this work, we present a setup that allows for the application of in situ electric and magnetic fields while the sample is analysed in the microscope. As an example of the performances of the setup, we present measurements on Ni/Pb(Mg{sub 0.66}Nb{sub 0.33})O{submore » 3}-PbTiO{sub 3} and La{sub 0.7}Sr{sub 0.3}MnO{sub 3}/PMN-PT artificial multiferroic nanostructures.« less

a Conceptual Framework for Indoor Mapping by Using Grammars

NASA Astrophysics Data System (ADS)

Hu, X.; Fan, H.; Zipf, A.; Shang, J.; Gu, F.

2017-09-01

Maps are the foundation of indoor location-based services. Many automatic indoor mapping approaches have been proposed, but they rely highly on sensor data, such as point clouds and users' location traces. To address this issue, this paper presents a conceptual framework to represent the layout principle of research buildings by using grammars. This framework can benefit the indoor mapping process by improving the accuracy of generated maps and by dramatically reducing the volume of the sensor data required by traditional reconstruction approaches. In addition, we try to present more details of partial core modules of the framework. An example using the proposed framework is given to show the generation process of a semantic map. This framework is part of an ongoing research for the development of an approach for reconstructing semantic maps.

Orthonormal aberration polynomials for anamorphic optical imaging systems with circular pupils.

PubMed

Mahajan, Virendra N

2012-06-20

In a recent paper, we considered the classical aberrations of an anamorphic optical imaging system with a rectangular pupil, representing the terms of a power series expansion of its aberration function. These aberrations are inherently separable in the Cartesian coordinates (x,y) of a point on the pupil. Accordingly, there is x-defocus and x-coma, y-defocus and y-coma, and so on. We showed that the aberration polynomials orthonormal over the pupil and representing balanced aberrations for such a system are represented by the products of two Legendre polynomials, one for each of the two Cartesian coordinates of the pupil point; for example, L(l)(x)L(m)(y), where l and m are positive integers (including zero) and L(l)(x), for example, represents an orthonormal Legendre polynomial of degree l in x. The compound two-dimensional (2D) Legendre polynomials, like the classical aberrations, are thus also inherently separable in the Cartesian coordinates of the pupil point. Moreover, for every orthonormal polynomial L(l)(x)L(m)(y), there is a corresponding orthonormal polynomial L(l)(y)L(m)(x) obtained by interchanging x and y. These polynomials are different from the corresponding orthogonal polynomials for a system with rotational symmetry but a rectangular pupil. In this paper, we show that the orthonormal aberration polynomials for an anamorphic system with a circular pupil, obtained by the Gram-Schmidt orthogonalization of the 2D Legendre polynomials, are not separable in the two coordinates. Moreover, for a given polynomial in x and y, there is no corresponding polynomial obtained by interchanging x and y. For example, there are polynomials representing x-defocus, balanced x-coma, and balanced x-spherical aberration, but no corresponding y-aberration polynomials. The missing y-aberration terms are contained in other polynomials. We emphasize that the Zernike circle polynomials, although orthogonal over a circular pupil, are not suitable for an anamorphic system as they do not represent balanced aberrations for such a system.

CFD methodology and validation for turbomachinery flows

NASA Astrophysics Data System (ADS)

Hirsch, Ch.

1994-05-01

The essential problem today, in the application of 3D Navier-Stokes simulations to the design and analysis of turbomachinery components, is the validation of the numerical approximation and of the physical models, in particular the turbulence modelling. Although most of the complex 3D flow phenomena occurring in turbomachinery bladings can be captured with relatively coarse meshes, many detailed flow features are dependent on mesh size, on the turbulence and transition models. A brief review of the present state of the art of CFD methodology is given with emphasis on quality and accuracy of numerical approximations related to viscous flow computations. Considerations related to the mesh influence on solution accuracy are stressed. The basic problems of turbulence and transition modelling are discussed next, with a short summary of the main turbulence models and their applications to representative turbomachinery flows. Validations of present turbulence models indicate that none of the available turbulence models is able to predict all the detailed flow behavior in complex flow interactions. In order to identify the phenomena that can be captured on coarser meshes a detailed understanding of the complex 3D flow in compressor and turbines is necessary. Examples of global validations for different flow configurations, representative of compressor and turbine aerodynamics are presented, including secondary and tip clearance flows.

A qualitative analysis of student-written law and ethics cases: A snapshot of PY2 student experience.

PubMed

Karwaki, Tanya E; Hazlet, Thomas K

2017-05-01

This study was designed to better understand pharmacy students' experiences and recognition of legal and ethical tensions existing in pharmacy practice as demonstrated in student-written law and ethics cases. A qualitative analysis of 132 student-written cases representing the team efforts of 1053 students over a 12-year time period was conducted. Student-written cases were coded and analyzed thematically. Our results demonstrate the types of ethical and legal issues our students have experienced in pharmacy practice during the first five quarters of their professional education. Our data highlight three themes: 1) ethical dilemmas presented when the law is misapplied; 2) ethical dilemmas presented when an institutional policy or law was viewed as insufficient; and 3) ethical dilemmas presented as provider distress. The third theme was further subdivided into five subthemes. The themes that emerged from this study represent some of the ethical dilemmas that second professional year students have encountered and how these dilemmas may intersect with legal boundaries. Educators can use cases demonstrating these themes to reinforce law and ethics education in the curriculum, thus helping prepare students for pharmacy practice. This article recommends how and when to use case examples. Copyright © 2017 Elsevier Inc. All rights reserved.

Applications of film thickness equations

NASA Technical Reports Server (NTRS)

Hamrock, B. J.; Dowson, D.

1983-01-01

A number of applications of elastohydrodynamic film thickness expressions were considered. The motion of a steel ball over steel surfaces presenting varying degrees of conformity was examined. The equation for minimum film thickness in elliptical conjunctions under elastohydrodynamic conditions was applied to roller and ball bearings. An involute gear was also introduced, it was again found that the elliptical conjunction expression yielded a conservative estimate of the minimum film thickness. Continuously variable-speed drives like the Perbury gear, which present truly elliptical elastohydrodynamic conjunctions, are favored increasingly in mobile and static machinery. A representative elastohydrodynamic condition for this class of machinery is considered for power transmission equipment. The possibility of elastohydrodynamic films of water or oil forming between locomotive wheels and rails is examined. The important subject of traction on the railways is attracting considerable attention in various countries at the present time. The final example of a synovial joint introduced the equation developed for isoviscous-elastic regimes of lubrication.

Social and economic importance of textile reuse and recycling in Brazil

NASA Astrophysics Data System (ADS)

Baruque-Ramos, J.; Amaral, M. C.; Laktim, M. C.; Santos, H. N.; Araujo, F. B.; Zonatti, W. F.

2017-10-01

Brazil is an important world producer of textiles. However, this industrial activity, combined with additional import and trade, generates millions of tons of textile scraps, unsold clothing and discarded post-consumption garments. There is a great potential for the recycling and reuse industry in the context of solidarity and circular economy. The present study aimed to present examples in Brazil related to waste reduction, reuse and recycling of textiles in the context of solidary economy. In this way, some representative initiatives, from Sao Paulo, Minas Gerais and Rio de Janeiro states are presented and discussed based on these principles and approaching responsible lifestyles and environmental awareness and the refusal to waste resources in general. The main socioenvironmental benefits are related to the training of labor and local income generation, the population’s awareness of consumption patterns, saving of natural resources and raw materials, and mitigation of environmental impacts.

A PRACTICAL ONTOLOGY FOR THE LARGE-SCALE MODELING OF SCHOLARLY ARTIFACTS AND THEIR USAGE

DOE Office of Scientific and Technical Information (OSTI.GOV)

RODRIGUEZ, MARKO A.; BOLLEN, JOHAN; VAN DE SOMPEL, HERBERT

2007-01-30

The large-scale analysis of scholarly artifact usage is constrained primarily by current practices in usage data archiving, privacy issues concerned with the dissemination of usage data, and the lack of a practical ontology for modeling the usage domain. As a remedy to the third constraint, this article presents a scholarly ontology that was engineered to represent those classes for which large-scale bibliographic and usage data exists, supports usage research, and whose instantiation is scalable to the order of 50 million articles along with their associated artifacts (e.g. authors and journals) and an accompanying 1 billion usage events. The real worldmore » instantiation of the presented abstract ontology is a semantic network model of the scholarly community which lends the scholarly process to statistical analysis and computational support. They present the ontology, discuss its instantiation, and provide some example inference rules for calculating various scholarly artifact metrics.« less

Heider balance in human networks

NASA Astrophysics Data System (ADS)

Gawroński, P.; Kułakowski, K.

2005-07-01

Recently, a continuous dynamics was proposed to simulate dynamics of interpersonal relations in a society represented by a fully connected graph. The final state of such a society was found to be identical with the so-called Heider balance (HB), where the society is divided into two mutually hostile groups. In the continuous model, a polarization of opinions was found in HB. Here we demonstrate that the polarization occurs also in Barabási-Albert networks, where the Heider balance is not necessarily present. In the second part of this work we demonstrate the results of our formalism, when applied to reference examples: the Southern women and the Zachary club.

Theory of molecular rate processes in the presence of intense laser radiation

NASA Technical Reports Server (NTRS)

George, T. F.; Zimmerman, I. H.; Devries, P. L.; Yuan, J.-M.; Lam, K.-S.; Bellum, J. C.; Lee, H.-W.; Slutsky, M. S.; Lin, J.-T.

1979-01-01

The present paper deals with the influence of intense laser radiation on gas-phase molecular rate processes. Representations of the radiation field, the particle system, and the interaction involving these two entities are discussed from a general rather than abstract point of view. The theoretical methods applied are outlined, and the formalism employed is illustrated by application to a variety of specific processes. Quantum mechanical and semiclassical treatments of representative atom-atom and atom-diatom collision processes in the presence of a field are examined, and examples of bound-continuum processes and heterogeneous catalysis are discussed within the framework of both quantum-mechanical and semiclassical theories.

Towards Sustainable C-H Functionalization Reactions: The Emerging Role of Bio-Based Reaction Media.

PubMed

Santoro, Stefano; Marrocchi, Assunta; Lanari, Daniela; Ackermann, Lutz; Vaccaro, Luigi

2018-04-18

In the last decade, transition-metal catalyzed C-H functionalization reactions have progressed enourmosly, becoming a useful tool in organic synthesis and a practibable alternative to well-established methodologies. Very recently, research efforts have also been devoted to developing more sustainable C-H functionalization protocols, in order to increase their applicability. One of the most promising approaches in this sense is represented by the substitution of common reaction media with bio-based solvents. In the present contribution a general perspective on the benefits of this approach is given, followed by selected literature examples. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Melorheostosis with ipsilateral nevus sebaceus (didymosis melorheosebacea).

PubMed

Tinschert, Sigrid; Stein, Anette; Göldner, Burkhard; Dietel, Manfred; Happle, Rudolf

2003-01-01

We report an unusual case of unilateral melorheostosis and ipsilateral extensive sebaceous nevus. Because the two conditions affected the same side of the body, we hypothesize that they originated from a common genetic mechanism. The temporal and spatial co-occurrence may represent a further example of non-allelic didymosis (twin spotting). The embryo would carry two different recessive mutations at one gene locus or at linked loci on either of a pair of homologous chromosomes. Postzygotic recombination occurring during early embryonic development would result in two different populations of cells homozygous for either mutation. If this concept holds true, the present case may be described as " didymosis melorheosebacea ".

STAGS Example Problems Manual

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.; Rankin, Charles C.

2006-01-01

This document summarizes the STructural Analysis of General Shells (STAGS) development effort, STAGS performance for selected demonstration problems, and STAGS application problems illustrating selected advanced features available in the STAGS Version 5.0. Each problem is discussed including selected background information and reference solutions when available. The modeling and solution approach for each problem is described and illustrated. Numerical results are presented and compared with reference solutions, test data, and/or results obtained from mesh refinement studies. These solutions provide an indication of the overall capabilities of the STAGS nonlinear finite element analysis tool and provide users with representative cases, including input files, to explore these capabilities that may then be tailored to other applications.

Methodological considerations in using complex survey data: an applied example with the Head Start Family and Child Experiences Survey.

PubMed

Hahs-Vaughn, Debbie L; McWayne, Christine M; Bulotsky-Shearer, Rebecca J; Wen, Xiaoli; Faria, Ann-Marie

2011-06-01

Complex survey data are collected by means other than simple random samples. This creates two analytical issues: nonindependence and unequal selection probability. Failing to address these issues results in underestimated standard errors and biased parameter estimates. Using data from the nationally representative Head Start Family and Child Experiences Survey (FACES; 1997 and 2000 cohorts), three diverse multilevel models are presented that illustrate differences in results depending on addressing or ignoring the complex sampling issues. Limitations of using complex survey data are reported, along with recommendations for reporting complex sample results. © The Author(s) 2011

Pentacoordinate silicon(IV): cationic, anionic and neutral complexes derived from the reaction of NHC→SiCl4 with highly Lewis acidic (C2F5)2SiH2.

PubMed

Böttcher, T; Steinhauer, S; Neumann, B; Stammler, H-G; Röschenthaler, G-V; Hoge, B

2014-06-14

Addition of NHC→SiCl4 to the highly Lewis acidic bis(pentafluoroethyl)silane ((C2F5)2SiH2) afforded the salt [(NHC)2SiCl2H][(C2F5)2SiCl3] with pentacoordinate silicon in the cation and the anion. The anion represents the first example of a chlorosilicate structurally characterized in the solid state. In this reaction, the long sought pentacoordinate NHC-adduct of silicochloroform was identified as an intermediate and its crystal structure is presented.

Modeling hospitals' adaptive capacity during a loss of infrastructure services.

PubMed

Vugrin, Eric D; Verzi, Stephen J; Finley, Patrick D; Turnquist, Mark A; Griffin, Anne R; Ricci, Karen A; Wyte-Lake, Tamar

2015-01-01

Resilience in hospitals - their ability to withstand, adapt to, and rapidly recover from disruptive events - is vital to their role as part of national critical infrastructure. This paper presents a model to provide planning guidance to decision makers about how to make hospitals more resilient against possible disruption scenarios. This model represents a hospital's adaptive capacities that are leveraged to care for patients during loss of infrastructure services (power, water, etc.). The model is an optimization that reallocates and substitutes resources to keep patients in a high care state or allocates resources to allow evacuation if necessary. An illustrative example demonstrates how the model might be used in practice.

Integrative computational models of cardiac arrhythmias -- simulating the structurally realistic heart

PubMed Central

Trayanova, Natalia A; Tice, Brock M

2009-01-01

Simulation of cardiac electrical function, and specifically, simulation aimed at understanding the mechanisms of cardiac rhythm disorders, represents an example of a successful integrative multiscale modeling approach, uncovering emergent behavior at the successive scales in the hierarchy of structural complexity. The goal of this article is to present a review of the integrative multiscale models of realistic ventricular structure used in the quest to understand and treat ventricular arrhythmias. It concludes with the new advances in image-based modeling of the heart and the promise it holds for the development of individualized models of ventricular function in health and disease. PMID:20628585

The contribution of the human posterior parietal cortex to episodic memory.

PubMed

Sestieri, Carlo; Shulman, Gordon L; Corbetta, Maurizio

2017-02-17

The posterior parietal cortex (PPC) is traditionally associated with attention, perceptual decision making and sensorimotor transformations, but more recent human neuroimaging studies support an additional role in episodic memory retrieval. In this Opinion article, we present a functional-anatomical model of the involvement of the PPC in memory retrieval. Parietal regions involved in perceptual attention and episodic memory are largely segregated and often show a push-pull relationship, potentially mediated by prefrontal regions. Moreover, different PPC regions carry out specific functions during retrieval - for example, representing retrieved information, recoding this information based on task demands, or accumulating evidence for memory decisions.

Two alternative ways for solving the coordination problem in multilevel optimization

NASA Technical Reports Server (NTRS)

Sobieszczanski-Sobieski, Jaroslaw

1991-01-01

Two techniques for formulating the coupling between levels in multilevel optimization by linear decomposition, proposed as improvements over the original formulation, now several years old, that relied on explicit equality constraints which were shown by application experience as occasionally causing numerical difficulties. The two new techniques represent the coupling without using explicit equality constraints, thus avoiding the above diffuculties and also reducing computational cost of the procedure. The old and new formulations are presented in detail and illustrated by an example of a structural optimization. A generic version of the improved algorithm is also developed for applications to multidisciplinary systems not limited to structures.

[Notes on the phlebologic work of Jean-Daniel Martinet].

PubMed

Sapin, G

1977-01-01

In homage to J.D. Martinet, the author, who was his collaborator for more than 25 years, surveys his phlebological work, so diverse and so multiple that it embraces all subjects of the venous pathology of the lower limbs. He cites 3 representative examples on different levels: the information and practical conclusions provided by phlebological investigations, especially retrograde; the classification of phlebitis migrans according to its course; the various problems presented by the surgery of varicose veins. Finally he emphasizes Martinet's qualities of loyalty and intellectual honesty, as well as his role as creator and director of a team (Broca, and later Epee de Bois).

The contribution of the human posterior parietal cortex to episodic memory

PubMed Central

Sestieri, Carlo; Shulman, Gordon L.; Corbetta, Maurizio

2017-01-01

The posterior parietal cortex (PPC) is traditionally associated with attention, perceptual decision making and sensorimotor transformations, but more recent human neuroimaging studies support an additional role in episodic memory retrieval. In this Opinion article, we present a functional–anatomical model of the involvement of the PPC in memory retrieval. Parietal regions involved in perceptual attention and episodic memory are largely segregated and often show a push–pull relationship, potentially mediated by prefrontal regions. Moreover, different PPC regions carry out specific functions during retrieval — for example, representing retrieved information, recoding this information based on task demands, or accumulating evidence for memory decisions. PMID:28209980

Simulation by bondgraphs

NASA Astrophysics Data System (ADS)

Thoma, Jean Ulrich

The fundamental principles and applications of the bond graph method, in which a system is represented on paper by letter elements and their interconnections (bonds), are presented in an introduction for engineering students. Chapters are devoted to simulation and graphical system models; bond graphs as networks for power and signal exchange; the simulation and design of mechanical engineering systems; the simulation of fluid power systems and hydrostatic devices; electrical circuits, drives, and components; practical procedures and problems of bond-graph-based numerical simulation; and applications to thermodynamics, chemistry, and biology. Also included are worked examples of applications to robotics, shocks and collisions, ac circuits, hydraulics, and a hydropneumatic fatigue-testing machine.

Software for Data Analysis with Graphical Models

NASA Technical Reports Server (NTRS)

Buntine, Wray L.; Roy, H. Scott

1994-01-01

Probabilistic graphical models are being used widely in artificial intelligence and statistics, for instance, in diagnosis and expert systems, as a framework for representing and reasoning with probabilities and independencies. They come with corresponding algorithms for performing statistical inference. This offers a unifying framework for prototyping and/or generating data analysis algorithms from graphical specifications. This paper illustrates the framework with an example and then presents some basic techniques for the task: problem decomposition and the calculation of exact Bayes factors. Other tools already developed, such as automatic differentiation, Gibbs sampling, and use of the EM algorithm, make this a broad basis for the generation of data analysis software.

Lognormal Uncertainty Estimation for Failure Rates

NASA Technical Reports Server (NTRS)

Britton, Paul T.; Al Hassan, Mohammad; Ring, Robert W.

2017-01-01

"Uncertainty analysis itself is uncertain, therefore, you cannot evaluate it exactly," Source Uncertain. Quantitative results for aerospace engineering problems are influenced by many sources of uncertainty. Uncertainty analysis aims to make a technical contribution to decision-making through the quantification of uncertainties in the relevant variables as well as through the propagation of these uncertainties up to the result. Uncertainty can be thought of as a measure of the 'goodness' of a result and is typically represented as statistical dispersion. This presentation will explain common measures of centrality and dispersion; and-with examples-will provide guidelines for how they may be estimated to ensure effective technical contributions to decision-making.

Computational approach to Thornley's problem by bivariate operational calculus

NASA Astrophysics Data System (ADS)

Bazhlekova, E.; Dimovski, I.

2012-10-01

Thornley's problem is an initial-boundary value problem with a nonlocal boundary condition for linear onedimensional reaction-diffusion equation, used as a mathematical model of spiral phyllotaxis in botany. Applying a bivariate operational calculus we find explicit representation of the solution, containing two convolution products of special solutions and the arbitrary initial and boundary functions. We use a non-classical convolution with respect to the space variable, extending in this way the classical Duhamel principle. The special solutions involved are represented in the form of fast convergent series. Numerical examples are considered to show the application of the present technique and to analyze the character of the solution.

Microbiological food safety issues in Brazil: bacterial pathogens.

PubMed

Gomes, Bruna Carrer; Franco, Bernadette Dora Gombossy de Melo; De Martinis, Elaine Cristina Pereira

2013-03-01

The globalization of food supply impacts patterns of foodborne disease outbreaks worldwide, and consumers are having increased concern about microbiological food safety. In this sense, the assessment of epidemiological data of foodborne diseases in different countries has not only local impact, but it can also be of general interest, especially in the case of major global producers and exporters of several agricultural food products, such as Brazil. In this review, the most common agents of foodborne illnesses registered in Brazil will be presented, compiled mainly from official databases made available to the public. In addition, some representative examples of studies on foodborne bacterial pathogens commonly found in Brazilian foods are provided.

Satellite broadcasting system study

NASA Technical Reports Server (NTRS)

1972-01-01

The study to develop a system model and computer program representative of broadcasting satellite systems employing community-type receiving terminals is reported. The program provides a user-oriented tool for evaluating performance/cost tradeoffs, synthesizing minimum cost systems for a given set of system requirements, and performing sensitivity analyses to identify critical parameters and technology. The performance/ costing philosophy and what is meant by a minimum cost system is shown graphically. Topics discussed include: main line control program, ground segment model, space segment model, cost models and launch vehicle selection. Several examples of minimum cost systems resulting from the computer program are presented. A listing of the computer program is also included.

Optimal Full Information Synthesis for Flexible Structures Implemented on Cray Supercomputers

NASA Technical Reports Server (NTRS)

Lind, Rick; Balas, Gary J.

1995-01-01

This paper considers an algorithm for synthesis of optimal controllers for full information feedback. The synthesis procedure reduces to a single linear matrix inequality which may be solved via established convex optimization algorithms. The computational cost of the optimization is investigated. It is demonstrated the problem dimension and corresponding matrices can become large for practical engineering problems. This algorithm represents a process that is impractical for standard workstations for large order systems. A flexible structure is presented as a design example. Control synthesis requires several days on a workstation but may be solved in a reasonable amount of time using a Cray supercomputer.

Fast linear feature detection using multiple directional non-maximum suppression.

PubMed

Sun, C; Vallotton, P

2009-05-01

The capacity to detect linear features is central to image analysis, computer vision and pattern recognition and has practical applications in areas such as neurite outgrowth detection, retinal vessel extraction, skin hair removal, plant root analysis and road detection. Linear feature detection often represents the starting point for image segmentation and image interpretation. In this paper, we present a new algorithm for linear feature detection using multiple directional non-maximum suppression with symmetry checking and gap linking. Given its low computational complexity, the algorithm is very fast. We show in several examples that it performs very well in terms of both sensitivity and continuity of detected linear features.

HCI∧2 framework: a software framework for multimodal human-computer interaction systems.

PubMed

Shen, Jie; Pantic, Maja

2013-12-01

This paper presents a novel software framework for the development and research in the area of multimodal human-computer interface (MHCI) systems. The proposed software framework, which is called the HCI∧2 Framework, is built upon publish/subscribe (P/S) architecture. It implements a shared-memory-based data transport protocol for message delivery and a TCP-based system management protocol. The latter ensures that the integrity of system structure is maintained at runtime. With the inclusion of bridging modules, the HCI∧2 Framework is interoperable with other software frameworks including Psyclone and ActiveMQ. In addition to the core communication middleware, we also present the integrated development environment (IDE) of the HCI∧2 Framework. It provides a complete graphical environment to support every step in a typical MHCI system development process, including module development, debugging, packaging, and management, as well as the whole system management and testing. The quantitative evaluation indicates that our framework outperforms other similar tools in terms of average message latency and maximum data throughput under a typical single PC scenario. To demonstrate HCI∧2 Framework's capabilities in integrating heterogeneous modules, we present several example modules working with a variety of hardware and software. We also present an example of a full system developed using the proposed HCI∧2 Framework, which is called the CamGame system and represents a computer game based on hand-held marker(s) and low-cost camera(s).

Environmental endocrine disruption: an effects assessment and analysis.

PubMed Central

Crisp, T M; Clegg, E D; Cooper, R L; Wood, W P; Anderson, D G; Baetcke, K P; Hoffmann, J L; Morrow, M S; Rodier, D J; Schaeffer, J E; Touart, L W; Zeeman, M G; Patel, Y M

1998-01-01

This report is an overview of the current state of the science relative to environmental endocrine disruption in humans, laboratory testing, and wildlife species. Background information is presented on the field of endocrinology, the nature of hormones, and potential sites for endocrine disruption, with specific examples of chemicals affecting these sites. An attempt is made to present objectively the issue of endocrine disruption, consider working hypotheses, offer opposing viewpoints, analyze the available information, and provide a reasonable assessment of the problem. Emphasis is placed on disruption of central nervous system--pituitary integration of hormonal and sexual behavioral activity, female and male reproductive system development and function, and thyroid function. In addition, the potential role of environmental endocrine disruption in the induction of breast, testicular, and prostate cancers, as well as endometriosis, is evaluated. The interrelationship of the endocrine and immune system is documented. With respect to endocrine-related ecological effects, specific case examples from the peer-reviewed literature of marine invertebrates and representatives of the five classes of vertebrates are presented and discussed. The report identifies some data gaps in our understanding of the environmental endocrine disruption issue and recommends a few research needs. Finally, the report states the U.S. Environmental Protection Agency Science Policy Council's interim position on endocrine disruption and lists some of the ongoing activities to deal with this matter. PMID:9539004

Link between Neogene and modern sedimentary environments in the Zagros foreland basin

NASA Astrophysics Data System (ADS)

Pirouz, Mortaza; Simpson, Guy; Bahroudi, Abbas

2010-05-01

The Zagros mountain belt, with a length of 1800 km, is located in the south of Iran and was produced by collision between the Arabian plate and the Iran micro plate some time in the early Tertiary. After collision, the Zagros carbonate-dominated sedimentary basin has been replaced by a largely clastic system. The Neogene Zagros foreland basin comprises four main depositional environments which reflect the progressive southward migration of the deformation front with time. The oldest unit - the Gachsaran formation - is clastic in the northern part of the basin, but is dominated by evaporates in southern part, being deposited in a supratidal Sabkha-type environment. Overlying the Gachsaran is the Mishan formation, which is characterized by the Guri limestone member at the base, overlain by marine green marls. The thickness of the Guri member increases dramatically towards the southeast. The next youngest unit is the Aghajari Formation which consists of well sorted lenticular sandstone bodies in a red silty-mudstone. This formation is interpreted as representing the floodplain of dominantly meandering rivers. Finally, the Bakhtiari formation consists of mainly coarse-grained gravel sheets which are interpreted to represent braided river deposits. Each of these Neogene depositional environments has a modern day equivalent. For example, the braided rivers presently active in the Zagros mountains are modern analogues of the Bakhtiari. In the downstream direction, these braided rivers become meandering systems, which are equivalents of the Aghajari. Eventually, the meandering rivers meet the Persian gulf which is the site of the ‘modern day' Mishan shallow marine marls. Finally, the modern carbonate system on the southern margin of Persian Gulf represents the Guri member paleo-environment, behind which Sabkha-type deposits similar to the Gachsaran are presently being deposited. One important implication of this link between the Neogene foreland basin deposits and the modern environments is that all formation boundaries are strongly diachronous. Thus, for example, although the Mishan is Burdigalian-Messinian in regions where it is currently undergoing subaerial erosion in the Fars zone, it is presumably still forming today in the modern Persian gulf foredeep.

U.S. Geological Survey Library classification system

USGS Publications Warehouse

Sasscer, R. Scott

1992-01-01

The U.S. Geological Survey library classification system has been designed for an earth science library. It is a tool for assigning classification numbers to earth science and allied pure science library materials in order to collect these materials into related subject groups on the library shelves and arrange them alphabetically by author and title. It can also be used as a retrieval system to access these materials through the subject and visible geographic classification numbers.The classification scheme has been developed over the years since 1904 to meet the ever-changing needs of increased specialization and new areas of study in the earth sciences.This system contains seven schedules:Subject scheduleGeological survey scheduleEarth science periodical scheduleGovernment documents periodical scheduleGeneral science periodical scheduleEarth science maps scheduleGeographic scheduleA geographic number, from the geographic schedule, is distinguished from other numbers in the system in that it is always enclosed in parentheses; for example, (200) is the geographic number for the United States.The geographic number is used in conjunction with the six other previously listed schedules, and it represents slightly different nuances of meanings, in respect to geographic locale, for each schedule.When used with a subject number, the geographic number indicates the country, state, province, or region in which the research was made. The subject number, 203, geology, when combined with the geographic number, (200), for example 203(200), is the classification number for library materials on the geology of the United States.The geographic number, combined with the capital letter G, for example, G(211), is the classification number for an earth science periodical issued by a geological association or university geology department in the State of Maine.When the letter S is combined with a geographic number, for example, S(276), it represents a general science periodical for a university or association in California.When the letter P is combined with a geographic number, for example, P(200), it represents a governmental periodical issued by the United States Federal Government.Geographic numbers standing alone represent classification numbers for the publications of geological surveys; for example, (200) represents publications of the U.S. Geological Survey.Map call numbers have a geographic number preceded by the capital letter M, followed by an abbreviated subject number.For example:M(200)2where:M = Map(200) = Geographic region of the United States2 = Abbreviation for the subject number 203— geology.The introduction, which follows this abstract, provides detailed procedures on the construction of complete call numbers for works falling into the framework of the aforesaid classification schedules.The tables following the introduction can be quickly accessed through the use of the newly expanded subject index.The purpose of this publication is to provide the earth science community with a classification and retrieval system for earth science materials, to provide sufficient explanation of its structure and use, and to enable library staff and clientele to classify or access research materials in a library collection.

76 FR 28260 - Self-Regulatory Organizations; Notice of Filing and Immediate Effectiveness of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-16

... that in the event of a board vacancy, specifically a Member Representative Director position, the... increase in the size of the Board results in the creation of a new Member Representative Director position... member of the Exchange. By way of example, an Inactive Nominee would be activated in the event of an...

Informed Choice? How the United Kingdom's Key Information Set Fails to Represent Pedagogy to Potential Students

ERIC Educational Resources Information Center

Barefoot, Helen; Oliver, Martin; Mellar, Harvey

2016-01-01

This paper explores the ways in which information about course pedagogy has been represented to potential students through national descriptors and specifications such as the United Kingdom's Key Information Set. It examines the extent to which such descriptors provide helpful information about pedagogy, for example innovative uses of technology.…

The professional perspective on patient involvement in the development of quality indicators: a qualitative analysis using the example of chronic heart failure in the German health care setting.

PubMed

Pohontsch, Nadine Janis; Herzberg, Heidrun; Joos, Stefanie; Welti, Felix; Scherer, Martin; Blozik, Eva

2015-01-01

There is an international consensus that quality indicators (QIs) of health care ought to represent patient-relevant aspects. Therefore, patient involvement in the development process is essential. However, there is no methodological gold standard for involving patients in QI development. The aim of this study is to explore experts' views on the representation of patient-relevant aspects in the QI development process using the QIs developed in the context of the German National Disease Management Guideline for Heart Failure as an example. Semi-structured, open telephone interviews were conducted with 15 German experts (patient representatives, physicians, researchers, and methodologists involved in guideline development or quality assessment). Interview themes were the relevance of the exemplary set of QIs for patients, as well as the legitimacy of, competence of, and collaboration with the patient representative who participated in the development process. Interviews were fully transcribed and content analyzed. Deductive categories derived from the research questions were supplemented by inductively formed categories during the review of the interview material. The qualitative analysis suggests a discrepancy between the guidelines' QIs and those relevant to patients from an expert's point of view, such as physician-patient communication and quality of counseling. Experts reported only minor communication and cooperation problems while working together in the guideline/QI development team. Concerns existed, for example, regarding the recruitment of patient representatives for diseases without self-help organizations, the financing of patient representation, and the training of patient representatives. Only few potential strategies for improving the process of patient involvement were mentioned. Integrating the patients' perspectives through the recruitment of a patient representative to participate in the development team was well established and broadly accepted. However, experts stated that the finally selected QIs represent only a small part of the patient-relevant aspects of medical care. According to the experts' perceptions, the current processes provide a very limited scope for integrating the patients' perspectives in a more extensive way. Supplementing the set of "conventional" QIs with additional, separately developed, "patient-side" QIs might help to include patient priorities in quality measurement.

A Classroom Note on Generating Examples for the Laws of Sines and Cosines from Pythagorean Triangles

ERIC Educational Resources Information Center

Sher, Lawrence; Sher, David

2007-01-01

By selecting certain special triangles, students can learn about the laws of sines and cosines without wrestling with long decimal representations or irrational numbers. Since the law of cosines requires only one of the three angles of a triangle, there are many examples of triangles with integral sides and a cosine that can be represented exactly…

The LUE data model for representation of agents and fields

NASA Astrophysics Data System (ADS)

de Jong, Kor; Schmitz, Oliver; Karssenberg, Derek

2017-04-01

Traditionally, agents-based and field-based modelling environments use different data models to represent the state of information they manipulate. In agent-based modelling, involving the representation of phenomena as objects bounded in space and time, agents are often represented by classes, each of which represents a particular kind of agent and all its properties. Such classes can be used to represent entities like people, birds, cars and countries. In field-based modelling, involving the representation of the environment as continuous fields, fields are often represented by a discretization of space, using multidimensional arrays, each storing mostly a single attribute. Such arrays can be used to represent the elevation of the land-surface, the pH of the soil, or the population density in an area, for example. Representing a population of agents by class instances grouped in collections is an intuitive way of organizing information. A drawback, though, is that models in which class instances grouping properties are stored in collections are less efficient (execute slower) than models in which collections of properties are grouped. The field representation, on the other hand, is convenient for the efficient execution of models. Another drawback is that, because the data models used are so different, integrating agent-based and field-based models becomes difficult, since the model builder has to deal with multiple concepts, and often multiple modelling environments. With the development of the LUE data model [1] we aim at representing agents and fields within a single paradigm, by combining the advantages of the data models used in agent-based and field-based data modelling. This removes the barrier for writing integrated agent-based and field-based models. The resulting data model is intuitive to use and allows for efficient execution of models. LUE is both a high-level conceptual data model and a low-level physical data model. The LUE conceptual data model is a generalization of the data models used in agent-based and field-based modelling. The LUE physical data model [2] is an implementation of the LUE conceptual data model in HDF5. In our presentation we will provide details of our approach to organizing information about agents and fields. We will show examples of agent and field data represented by the conceptual and physical data model. References: [1] de Bakker, M.P., de Jong, K., Schmitz, O., Karssenberg, D., 2016. Design and demonstration of a data model to integrate agent-based and field-based modelling. Environmental Modelling and Software. http://dx.doi.org/10.1016/j.envsoft.2016.11.016 [2] de Jong, K., 2017. LUE source code. https://github.com/pcraster/lue

Survey of Intermediate Microeconomic Textbooks.

ERIC Educational Resources Information Center

Goulet, Janet C.

1986-01-01

Surveys nine undergraduate microeconomic theory textbooks comprising a representing sample those available. Criteria used were quantity and quality of examples, mathematical rigor, and level of abstraction. (JDH)

The application of low-rank and sparse decomposition method in the field of climatology

NASA Astrophysics Data System (ADS)

Gupta, Nitika; Bhaskaran, Prasad K.

2018-04-01

The present study reports a low-rank and sparse decomposition method that separates the mean and the variability of a climate data field. Until now, the application of this technique was limited only in areas such as image processing, web data ranking, and bioinformatics data analysis. In climate science, this method exactly separates the original data into a set of low-rank and sparse components, wherein the low-rank components depict the linearly correlated dataset (expected or mean behavior), and the sparse component represents the variation or perturbation in the dataset from its mean behavior. The study attempts to verify the efficacy of this proposed technique in the field of climatology with two examples of real world. The first example attempts this technique on the maximum wind-speed (MWS) data for the Indian Ocean (IO) region. The study brings to light a decadal reversal pattern in the MWS for the North Indian Ocean (NIO) during the months of June, July, and August (JJA). The second example deals with the sea surface temperature (SST) data for the Bay of Bengal region that exhibits a distinct pattern in the sparse component. The study highlights the importance of the proposed technique used for interpretation and visualization of climate data.

Stochastic differential equations in NONMEM: implementation, application, and comparison with ordinary differential equations.

PubMed

Tornøe, Christoffer W; Overgaard, Rune V; Agersø, Henrik; Nielsen, Henrik A; Madsen, Henrik; Jonsson, E Niclas

2005-08-01

The objective of the present analysis was to explore the use of stochastic differential equations (SDEs) in population pharmacokinetic/pharmacodynamic (PK/PD) modeling. The intra-individual variability in nonlinear mixed-effects models based on SDEs is decomposed into two types of noise: a measurement and a system noise term. The measurement noise represents uncorrelated error due to, for example, assay error while the system noise accounts for structural misspecifications, approximations of the dynamical model, and true random physiological fluctuations. Since the system noise accounts for model misspecifications, the SDEs provide a diagnostic tool for model appropriateness. The focus of the article is on the implementation of the Extended Kalman Filter (EKF) in NONMEM for parameter estimation in SDE models. Various applications of SDEs in population PK/PD modeling are illustrated through a systematic model development example using clinical PK data of the gonadotropin releasing hormone (GnRH) antagonist degarelix. The dynamic noise estimates were used to track variations in model parameters and systematically build an absorption model for subcutaneously administered degarelix. The EKF-based algorithm was successfully implemented in NONMEM for parameter estimation in population PK/PD models described by systems of SDEs. The example indicated that it was possible to pinpoint structural model deficiencies, and that valuable information may be obtained by tracking unexplained variations in parameters.

Optical choppers with rotational elements: modeling, design and prototypes

NASA Astrophysics Data System (ADS)

Duma, Virgil-Florin; Cira, Octavian; Demian, Dorin

2017-05-01

We present a brief overview of our contributions regarding the analysis and design of optical choppers. Their applications range numerous domains, from optical sensing in radiometry or telescopes to laser manufacturing and biomedical imaging - for example for the controlled attenuation of light, the elimination of selected spectral domains, or the switching of optical paths. While these aspects are pointed out, the paper describes our analysis, modeling, and manufacturing of prototypes for choppers with: (a) wheels with windows with linear margins; (b) wheels with windows with non-linear margins (semi-circular or elliptical), outward or inward; (c) rotational shafts with different shapes, with slits or with holes. While variant (a) represents classical choppers, variant (b) represents the "eclipse" choppers that we have developed and also patented for the solution with two adjustable wheels that can produce circular windows. Variant (c), of choppers with shafts is also a patent application. Their transmission functions are discussed, for the shape of the laser pulses produced and for the attenuation coefficients obtained. While this discussion has been completed analytically for top-hat laser beams, it has been modeled using simulations for Gaussian and Bessel beams. Design, manufacturing aspects, and prototypes of the different chopper configurations complete the presentation.

SAM 2 Measurements of the Polar Stratospheric Aerosol, volume 2. April 1979 to October 1979

NASA Technical Reports Server (NTRS)

Mccormick, M. P.; Steele, H. M.; Hamill, P.

1982-01-01

The Stratospheric Aerosol Measurement (SAM) II sensor is abroad the Earth orbiting Nimbus 7 spacecraft proving extinction measurements of the Antarctic and Arctic stratospheric aerosol with a vertical resolution of 1 km. Representative examples and weekly averages of aerosol data and corresponding temperature profiles for the time and place of each SAM II measurement (April 29, 1979, to October 27, 1979) is presented. Contours of aerosol extinction as a function of altitude and longitude or time were plotted and weekly aerosol optical depths were calculated. Seasonal variations and variations in space (altitude and longitude) for both polar regions are easily seen. Typical values of aerosol extinction at the SAM II wavelength of 1.0 micron for the time priod were 1 to 3 x 10 to the -4th power km -1 in the main stratospheric aerosol layer. Optical depths for the stratosphere were about 0.002. Polar stratospheric clouds at altitudes between the tropopause and 20 km were observed during the Antarctic winter at various times and locations. A ready-to-use format containing a representative sample of the second 6 months of data to be used in atmospheric and climatic studies is presented.

The tissue microarray OWL schema: An open-source tool for sharing tissue microarray data

PubMed Central

Kang, Hyunseok P.; Borromeo, Charles D.; Berman, Jules J.; Becich, Michael J.

2010-01-01

Background: Tissue microarrays (TMAs) are enormously useful tools for translational research, but incompatibilities in database systems between various researchers and institutions prevent the efficient sharing of data that could help realize their full potential. Resource Description Framework (RDF) provides a flexible method to represent knowledge in triples, which take the form Subject-Predicate-Object. All data resources are described using Uniform Resource Identifiers (URIs), which are global in scope. We present an OWL (Web Ontology Language) schema that expands upon the TMA data exchange specification to address this issue and assist in data sharing and integration. Methods: A minimal OWL schema was designed containing only concepts specific to TMA experiments. More general data elements were incorporated from predefined ontologies such as the NCI thesaurus. URIs were assigned using the Linked Data format. Results: We present examples of files utilizing the schema and conversion of XML data (similar to the TMA DES) to OWL. Conclusion: By utilizing predefined ontologies and global unique identifiers, this OWL schema provides a solution to the limitations of XML, which represents concepts defined in a localized setting. This will help increase the utilization of tissue resources, facilitating collaborative translational research efforts. PMID:20805954

Letters, numbers, symbols and words: how to communicate grades of evidence and recommendations

PubMed Central

Schünemann, Holger J.; Best, Dana; Vist, Gunn; Oxman, Andrew D.

2003-01-01

THE GRADE WORKING GROUP IS DEVELOPING and evaluating a common, sensible approach to grading quality of evidence and strength of recommendations in health care. In this article, we discuss the advantages and disadvantages of using letters, numbers, symbols or words to represent grades of evidence and recommendations. Using multiple strategies, we searched for comparative studies of alternative ways of representing ordered categories in any context. In addition, we contacted experts and reviewed theoretical work and qualitative research on how best to communicate grades of any kind quickly and clearly. We were unable to identify health care research that addressed, either directly or indirectly, the best way to present grades of evidence and recommendations. We found examples of symbols used by government, commercial and consumer organizations to communicate quality of evidence or strength of recommendations, but no comparative studies. Although a number of grading systems are used in health care and other fields, there is little or no evidence of how well various presentations are understood. Before promoting the use of specific symbols, numbers, letters or words, the extent to which the intended message is comprehended should be evaluated. PMID:14517128

An illustrative overview of semi-quantitative MRI scoring of knee osteoarthritis: lessons learned from longitudinal observational studies.

PubMed

Roemer, F W; Hunter, D J; Crema, M D; Kwoh, C K; Ochoa-Albiztegui, E; Guermazi, A

2016-02-01

To introduce the most popular magnetic resonance imaging (MRI) osteoarthritis (OA) semi-quantitative (SQ) scoring systems to a broader audience with a focus on the most commonly applied scores, i.e., the MOAKS and WORMS system and illustrate similarities and differences. While the main structure and methodology of each scoring system are publicly available, the core of this overview will be an illustrative imaging atlas section including image examples from multiple OA studies applying MRI in regard to different features assessed, show specific examples of different grades and point out pitfalls and specifics of SQ assessment including artifacts, blinding to time point of acquisition and within-grade evaluation. Similarities and differences between different scoring systems are presented. Technical considerations are followed by a brief description of the most commonly utilized SQ scoring systems including their responsiveness and reliability. The second part is comprised of the atlas section presenting illustrative image examples. Evidence suggests that SQ assessment of OA by expert MRI readers is valid, reliable and responsive, which helps investigators to understand the natural history of this complex disease and to evaluate potential new drugs in OA clinical trials. Researchers have to be aware of the differences and specifics of the different systems to be able to engage in imaging assessment and interpretation of imaging-based data. SQ scoring has enabled us to explain associations of structural tissue damage with clinical manifestations of the disease and with morphological alterations thought to represent disease progression. Copyright © 2015 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Domain-Adapted Convolutional Networks for Satellite Image Classification: A Large-Scale Interactive Learning Workflow

DOE PAGES

Lunga, Dalton D.; Yang, Hsiuhan Lexie; Reith, Andrew E.; ...

2018-02-06

Satellite imagery often exhibits large spatial extent areas that encompass object classes with considerable variability. This often limits large-scale model generalization with machine learning algorithms. Notably, acquisition conditions, including dates, sensor position, lighting condition, and sensor types, often translate into class distribution shifts introducing complex nonlinear factors and hamper the potential impact of machine learning classifiers. Here, this article investigates the challenge of exploiting satellite images using convolutional neural networks (CNN) for settlement classification where the class distribution shifts are significant. We present a large-scale human settlement mapping workflow based-off multiple modules to adapt a pretrained CNN to address themore » negative impact of distribution shift on classification performance. To extend a locally trained classifier onto large spatial extents areas we introduce several submodules: First, a human-in-the-loop element for relabeling of misclassified target domain samples to generate representative examples for model adaptation; second, an efficient hashing module to minimize redundancy and noisy samples from the mass-selected examples; and third, a novel relevance ranking module to minimize the dominance of source example on the target domain. The workflow presents a novel and practical approach to achieve large-scale domain adaptation with binary classifiers that are based-off CNN features. Experimental evaluations are conducted on areas of interest that encompass various image characteristics, including multisensors, multitemporal, and multiangular conditions. Domain adaptation is assessed on source–target pairs through the transfer loss and transfer ratio metrics to illustrate the utility of the workflow.« less

Domain-Adapted Convolutional Networks for Satellite Image Classification: A Large-Scale Interactive Learning Workflow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lunga, Dalton D.; Yang, Hsiuhan Lexie; Reith, Andrew E.

Satellite imagery often exhibits large spatial extent areas that encompass object classes with considerable variability. This often limits large-scale model generalization with machine learning algorithms. Notably, acquisition conditions, including dates, sensor position, lighting condition, and sensor types, often translate into class distribution shifts introducing complex nonlinear factors and hamper the potential impact of machine learning classifiers. Here, this article investigates the challenge of exploiting satellite images using convolutional neural networks (CNN) for settlement classification where the class distribution shifts are significant. We present a large-scale human settlement mapping workflow based-off multiple modules to adapt a pretrained CNN to address themore » negative impact of distribution shift on classification performance. To extend a locally trained classifier onto large spatial extents areas we introduce several submodules: First, a human-in-the-loop element for relabeling of misclassified target domain samples to generate representative examples for model adaptation; second, an efficient hashing module to minimize redundancy and noisy samples from the mass-selected examples; and third, a novel relevance ranking module to minimize the dominance of source example on the target domain. The workflow presents a novel and practical approach to achieve large-scale domain adaptation with binary classifiers that are based-off CNN features. Experimental evaluations are conducted on areas of interest that encompass various image characteristics, including multisensors, multitemporal, and multiangular conditions. Domain adaptation is assessed on source–target pairs through the transfer loss and transfer ratio metrics to illustrate the utility of the workflow.« less

An illustrative overview of semi-quantitative MRI scoring of knee osteoarthritis: Lessons learned from longitudinal observational studies

PubMed Central

Roemer, Frank W.; Hunter, David J.; Crema, Michel D.; Kwoh, C. Kent; Ochoa-Albiztegui, Elena; Guermazi, Ali

2015-01-01

Objective To introduce the most popular magnetic resonance imaging (MRI) osteoarthritis (OA) semi-quantitative (SQ) scoring systems to a broader audience with a focus on the most commonly applied scores, i.e. the MOAKS and WORMS system and illustrate similarities and differences. Design While the main structure and methodology of each scoring system are publicly available, the core of this overview will be an illustrative imaging atlas section including image examples from multiple osteoarthritis studies applying MRI in regard to different features assessed, show specific examples of different grades and point out pitfalls and specifics of SQ assessment including artifacts, blinding to time point of acquisition and within-grade evaluation. Results Similarities and differences between different scoring systems are presented. Technical considerations are followed by a brief description of the most commonly utilized SQ scoring systems including their responsiveness and reliability. The second part is comprised of the atlas section presenting illustrative image examples. Conclusions Evidence suggests that SQ assessment of OA by expert MRI readers is valid, reliable and responsive, which helps investigators to understand the natural history of this complex disease and to evaluate potential new drugs in OA clinical trials. Researchers have to be aware of the differences and specifics of the different systems to be able to engage in imaging assessment and interpretation of imaging-based data. SQ scoring has enabled us to explain associations of structural tissue damage with clinical manifestations of the disease and with morphological alterations thought to represent disease progression. PMID:26318656

STEM-related, Student-led Service Learning / Community Engagement Projects: Examples and Benefits

NASA Astrophysics Data System (ADS)

Swap, R. J.; Wayland, K.

2015-12-01

Field-based, STEM-related service learning / community engagement projects present an opportunity for undergraduate students to demonstrate proficiencies related to the process of inquiry. These proficiencies include: appreciation of the larger project context, articulation of an informed question/hypothesis, project proposal development, interdisciplinary collaboration, project management (including planning, implementation reconfiguration and synthesis) and lastly the generation and handing off of acquired knowledge. Calls for these types of proficiencies have been expressed by governmental, non-governmental as well as the private sector. Accordingly, institutions of higher learning have viewed such activities as opportunities for enriching the learning experience for undergraduate students and for making such students more marketable, especially those from STEM-related fields. This institutional interest has provided an opportunity to support and expand field-based learning. Here we present examples of student-led/faculty-mentored international service learning and community engagement projects along the arc of preparation, implementation and post-field process. Representative examples that draw upon environmental science and engineering knowledge have been selected from more than 20 international undergraduate student projects over past decade and include: slow-sand water filtration, rainwater harvesting, methane biodigesters, water reticulation schemes and development and implementation of rocket stoves for communal cooking. We discuss these efforts in terms of the development of the aforementioned proficiencies, the utility of such proficiencies to the larger enterprise of STEM and the potential for transformative student learning outcomes. We share these experiences and lessons learned with the hope that others may intelligently borrow from our approach in a manner appropriate for their particular context.

Hierarchical algorithms for modeling the ocean on hierarchical architectures

NASA Astrophysics Data System (ADS)

Hill, C. N.

2012-12-01

This presentation will describe an approach to using accelerator/co-processor technology that maps hierarchical, multi-scale modeling techniques to an underlying hierarchical hardware architecture. The focus of this work is on making effective use of both CPU and accelerator/co-processor parts of a system, for large scale ocean modeling. In the work, a lower resolution basin scale ocean model is locally coupled to multiple, "embedded", limited area higher resolution sub-models. The higher resolution models execute on co-processor/accelerator hardware and do not interact directly with other sub-models. The lower resolution basin scale model executes on the system CPU(s). The result is a multi-scale algorithm that aligns with hardware designs in the co-processor/accelerator space. We demonstrate this approach being used to substitute explicit process models for standard parameterizations. Code for our sub-models is implemented through a generic abstraction layer, so that we can target multiple accelerator architectures with different programming environments. We will present two application and implementation examples. One uses the CUDA programming environment and targets GPU hardware. This example employs a simple non-hydrostatic two dimensional sub-model to represent vertical motion more accurately. The second example uses a highly threaded three-dimensional model at high resolution. This targets a MIC/Xeon Phi like environment and uses sub-models as a way to explicitly compute sub-mesoscale terms. In both cases the accelerator/co-processor capability provides extra compute cycles that allow improved model fidelity for little or no extra wall-clock time cost.

Multiple proton decays of 6Be, 8C, 8B(IAS) and excited states in 10C

NASA Astrophysics Data System (ADS)

Sobotka, Lee

2011-10-01

Recent technical advances have allowed for high-order correlation experiments to be done. We have primarily focused on experiments in which the final channels are composed of only alphas and protons. Four cases we have studied are: 6Be, 10C*, 8C, and 8B*(IAS) via 3, 4, 5, and 3-particle correlation measurements, respectively. While the first case had been studied before, our work presents very high statistics in the full Jacobi coordinates (the coordinates needed to describe 3-body decay.) Our study of 10C excited states provides isolatable examples of: correlated 2p decay, from one state, and the decay of another which is unusually highly correlated, a ``ménage a quatre.'' 8C decay presents the only case of sequential 3-body 2p decay steps (i.e. 2p-2p.) The intermediate in this 2-step process is the first example (6Be) mentioned above. Unlike the well-studied second step (6Be decay), the first step in this 2p-2p process provides another example of correlated 2p emission. The decay of 8B(IAS), the isobaric analog of 8C, also decays overwhelmingly by 2p emission, in this case to 6Li(IAS). This IAS-to-IAS 2p decay is one for which decay to the potential 1p intermediates is energetically allowed but isospin forbidden. This represents an expansion, over that originally envisioned by Goldanski, of the conceivable nuclear territory for 2p decay.

Developing an integrative level-dimensional taxonomy model for rehabilitation psychology research and practice.

PubMed

Mermis, Bernie J

2018-02-01

The present article concerns the development of a taxonomy model for organizing and classifying all aspects of rehabilitation psychology from an integrative level-dimensional conceptualization. This conceptualization is presented as an alternative to a primarily categorical approach to classification. It also assumes a continuity perspective for all aspects of behavior and experience. Development of this taxonomy model involves organizing information relevant to levels/domains of all aspects of behavior and experience, and to constructs describing their underlying components conceptually as well as dimensions which constitute the measurable basis of constructs. A taxonomy model with levels/domains, representative examples of constructs and dimensions is presented as a foundation for development of the present taxonomy model, with specific relevance to rehabilitation psychology. This integrative level-dimensional taxonomy model provides a structure for organizing all aspects of rehabilitation psychology relevant to understanding, assessing, and influencing the rehabilitation process. Suggestions for development and research are provided for the taxonomy model. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Learning by Explaining Examples to Oneself: A Computational Model

DTIC Science & Technology

1992-02-01

rules. of which 28 rep~resented common senise phtysirs (e.g.. a taut rope tied to a object pulls onl it ) and 17 represented ()vr-gnerlizt inssuch as...the ,mii~ jduid( ii ot refer to anl examiplle to achieve tilie goal. thliu we cla-si tied lie goalI as beingp resolved bY EIIL( * llliimi v all mlv 1i e

Method for Determination of the Wind Velocity and Direction

NASA Technical Reports Server (NTRS)

Dahlin, Goesta Johan

1988-01-01

Accurate determination of the position of an artillery piece, for example, using sound measurement systems through measurement of the muzzle noise requires access to wind data that is representative of the portion of the air from where the sound wave is propagated up the microphone base of the system. The invention provides a system for determining such representative wind data.

26 CFR 1.6045-5 - Information reporting on payments to attorneys.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) and (f), P must file an information return with respect to C for the $300,000. Example 4. Check made.... One check—joint payees—taxable to claimant. Employee C, who sues employer P for back wages, is represented by attorney A. P settles the suit for $300,000. The $300,000 represents taxable wages to C under...

Respiratory mechanics to understand ARDS and guide mechanical ventilation.

PubMed

Mauri, Tommaso; Lazzeri, Marta; Bellani, Giacomo; Zanella, Alberto; Grasselli, Giacomo

2017-11-30

As precision medicine is becoming a standard of care in selecting tailored rather than average treatments, physiological measurements might represent the first step in applying personalized therapy in the intensive care unit (ICU). A systematic assessment of respiratory mechanics in patients with the acute respiratory distress syndrome (ARDS) could represent a step in this direction, for two main reasons. Approach and Main results: On the one hand, respiratory mechanics are a powerful physiological method to understand the severity of this syndrome in each single patient. Decreased respiratory system compliance, for example, is associated with low end expiratory lung volume and more severe lung injury. On the other hand, respiratory mechanics might guide protective mechanical ventilation settings. Improved gravitationally dependent regional lung compliance could support the selection of positive end-expiratory pressure and maximize alveolar recruitment. Moreover, the association between driving airway pressure and mortality in ARDS patients potentially underlines the importance of sizing tidal volume on respiratory system compliance rather than on predicted body weight. The present review article aims to describe the main alterations of respiratory mechanics in ARDS as a potent bedside tool to understand severity and guide mechanical ventilation settings, thus representing a readily available clinical resource for ICU physicians.

Physiographic map of the Sicilian region (1:250,000 scale)

NASA Astrophysics Data System (ADS)

Priori, Simone; Fantappiè, Maria; Costantini, Edoardo A. C.

2015-04-01

Physiographic maps summarize and group the landforms of a territory into homogeneous areas in terms of kind and intensity of main geomorphological process. Most of the physiographic maps have large scale, which is national or continental scale. Other maps have been produced at the semi-detailed scales, while examples at the regional scale are much less common. However, being the Region the main administrative level in Europe, they can be very useful for land planning in many fields, such as ecological studies, risk maps, and soil mapping. This work presents a methodological example of regional physiographic map, compiled at 1:250,000 scale, representing the whole Sicilian region, the largest and most characteristic of Mediterranean island. The physiographic units were classed matching thematich layers (NDVI, geology, DEM, land cover) with the main geomorphological processes that were identified by stereo-interpretation of aerial photographs (1:70,000 scale). In addition, information from other published maps, representing geomorphological forms, aeolian deposits, anthropic terraced slopes, and landslide were used to improve the accuracy and reliability of the map. The classification of the physiographic units, and then the map legend, was built up on the basis of literature and taking into account Italian geomorphological legend. The legend proposed in this map, which can be applied also in other Mediterranean countries, is suitable for different scales. The landform units were grouped on the base of a geomorphological classification of the forms into: anthropogenic, eolian, coastal, valley floor, intermountain fluvial, slope erosional, structural, karstic, and volcanic.

GenoCore: A simple and fast algorithm for core subset selection from large genotype datasets.

PubMed

Jeong, Seongmun; Kim, Jae-Yoon; Jeong, Soon-Chun; Kang, Sung-Taeg; Moon, Jung-Kyung; Kim, Namshin

2017-01-01

Selecting core subsets from plant genotype datasets is important for enhancing cost-effectiveness and to shorten the time required for analyses of genome-wide association studies (GWAS), and genomics-assisted breeding of crop species, etc. Recently, a large number of genetic markers (>100,000 single nucleotide polymorphisms) have been identified from high-density single nucleotide polymorphism (SNP) arrays and next-generation sequencing (NGS) data. However, there is no software available for picking out the efficient and consistent core subset from such a huge dataset. It is necessary to develop software that can extract genetically important samples in a population with coherence. We here present a new program, GenoCore, which can find quickly and efficiently the core subset representing the entire population. We introduce simple measures of coverage and diversity scores, which reflect genotype errors and genetic variations, and can help to select a sample rapidly and accurately for crop genotype dataset. Comparison of our method to other core collection software using example datasets are performed to validate the performance according to genetic distance, diversity, coverage, required system resources, and the number of selected samples. GenoCore selects the smallest, most consistent, and most representative core collection from all samples, using less memory with more efficient scores, and shows greater genetic coverage compared to the other software tested. GenoCore was written in R language, and can be accessed online with an example dataset and test results at https://github.com/lovemun/Genocore.

Site Environmental Report for 2009, Volume 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Suying

2010-08-19

Volume II of the Site Environmental Report for 2009 is provided by Ernest Orlando Lawrence Berkeley National Laboratory as a supplemental appendix to Volume I, which contains the body of the report. Volume II contains the environmental monitoring and sampling data used to generate summary results of routine and nonroutine sampling at the Laboratory, except for groundwater sampling data, which may be found in the reports referred to in Chapter 4 of Volume I. The results from sample collections are more comprehensive in Volume II than in Volume I: for completeness, all results from sample collections that began or endedmore » in calendar year (CY) 2009 are included in this volume. However, the samples representing CY 2008 data have not been used in the summary results that are reported in Volume I. (For example, although ambient air samples collected on January 6, 2009, are presented in Volume II, they represent December 2008 data and are not included in Table 4-2 in Volume I.) When appropriate, sampling results are reported in both conventional and International System (SI) units. For some results, the rounding procedure used in data reporting may result in apparent differences between the numbers reported in SI and conventional units. (For example, stack air tritium results reported as < 1.5 Bq/m3 are shown variously as < 39 and < 41 pCi/m3. Both of these results are rounded correctly to two significant digits.)« less

An example of complex modelling in dentistry using Markov chain Monte Carlo (MCMC) simulation.

PubMed

Helfenstein, Ulrich; Menghini, Giorgio; Steiner, Marcel; Murati, Francesca

2002-09-01

In the usual regression setting one regression line is computed for a whole data set. In a more complex situation, each person may be observed for example at several points in time and thus a regression line might be calculated for each person. Additional complexities, such as various forms of errors in covariables may make a straightforward statistical evaluation difficult or even impossible. During recent years methods have been developed allowing convenient analysis of problems where the data and the corresponding models show these and many other forms of complexity. The methodology makes use of a Bayesian approach and Markov chain Monte Carlo (MCMC) simulations. The methods allow the construction of increasingly elaborate models by building them up from local sub-models. The essential structure of the models can be represented visually by directed acyclic graphs (DAG). This attractive property allows communication and discussion of the essential structure and the substantial meaning of a complex model without needing algebra. After presentation of the statistical methods an example from dentistry is presented in order to demonstrate their application and use. The dataset of the example had a complex structure; each of a set of children was followed up over several years. The number of new fillings in permanent teeth had been recorded at several ages. The dependent variables were markedly different from the normal distribution and could not be transformed to normality. In addition, explanatory variables were assumed to be measured with different forms of error. Illustration of how the corresponding models can be estimated conveniently via MCMC simulation, in particular, 'Gibbs sampling', using the freely available software BUGS is presented. In addition, how the measurement error may influence the estimates of the corresponding coefficients is explored. It is demonstrated that the effect of the independent variable on the dependent variable may be markedly underestimated if the measurement error is not taken into account ('regression dilution bias'). Markov chain Monte Carlo methods may be of great value to dentists in allowing analysis of data sets which exhibit a wide range of different forms of complexity.

Alternative U.S. Strategies for 1970-1980 (The Status Quo -- Yes or No?)

DTIC Science & Technology

1966-04-08

convent- ions. For example , the number of international conferences in these fields in which the U.S. alone has participated has doubled during the last...vital importance to the whole community in preventing 6. Syracuse Inivsrsity . tesearch ^corporation, or.. cx~., p. . violence...neither the...capability by an otherwise snail power represents international prestige and deterrence against encroachment by a local neighbor. Example : France v

DOE Office of Scientific and Technical Information (OSTI.GOV)

Labbe, Jessy L; Uehling, Jessie K; Payen, Thibaut

The last 10 years have seen the cost of sequencing complete genomes decrease at an incredible speed. This has led to an increase in the number of genomes sequenced in all the fungal tree of life as well as a wide variety of plant genomes. The increase in sequencing has permitted us to study the evolution of organisms on a genomic scale. A number of talks during the conference discussed the importance of transposable elements (TEs) that are present in almost all species of fungi. These TEs represent an especially large percentage of genomic space in fungi that interact withmore » plants. Thierry Rouxel (INRA, Nancy, France) showed the link between speciation in the Leptosphaeria complex and the expansion of TE families. For example in the Leptosphaeria complex, one species associated with oilseed rape has experienced a recent and massive burst of movement by a few TE families. The alterations caused by these TEs took place in discrete regions of the genome leading to shuffling of the genomic landscape and the appearance of genes specific to the species, such as effectors useful for the interactions with a particular plant (Rouxel et al., 2011). Other presentations showed the importance of TEs in affecting genome organization. For example, in Amanita different species appear to have been invaded by different TE families (Veneault-Fourrey & Martin, 2011).« less

The Secondary Contact Zone of Phylogenetic Lineages of the Philaenus spumarius (Hemiptera: Aphrophoridae): An Example of Incomplete Allopatric Speciation

PubMed Central

Lis, Agata; Maryańska-Nadachowska, Anna; Lachowska-Cierlik, Dorota; Kajtoch, Łukasz

2014-01-01

Abstract Previous studies on the phylogeography of the meadow spittlebug Philaenus spumarius (L.) (Hemiptera: Aphrophoridae) suggest the existence of a contact zone of its main phylogenetic lineages along mountain chains in Europe and western Asia. This study presents a detailed examination of the population genetics of P. spumarius within the Carpathian Mountains. The main objective was to determine whether the populations inhabiting that area consist of individuals belonging to different genetic units and whether the observed pattern could be an example of secondary contact zone which formed after incomplete allopatric speciation. Specimens from six transects across the Carpathian arc were examined. The mitochondrial phylogeography of the meadow spittlebug in the examined area clearly shows that individuals from both main clades meet and mix there. Representatives of all three main EF1-α clades were also found. The present distribution of the main clades with a zone of overlap along the mountain ranges may suggest that these phylogenetic lineages form a young hybrid zone. Moreover, a limited number of individuals were shown to possess heteroplasmic mitochondrial DNA, which gives additional support to intraspecific hybridization. P. spumarius could be used in future work as an excellent model species in investigating population genetics, intraspecific hybridization, and speciation in progress. PMID:25500280

Studies in the extensively automatic construction of large odds-based inference networks from structured data. Examples from medical, bioinformatics, and health insurance claims data.

PubMed

Robson, B; Boray, S

2018-04-01

Theoretical and methodological principles are presented for the construction of very large inference nets for odds calculations, composed of hundreds or many thousands or more of elements, in this paper generated by structured data mining. It is argued that the usual small inference nets can sometimes represent rather simple, arbitrary estimates. Examples of applications in clinical and public health data analysis, medical claims data and detection of irregular entries, and bioinformatics data, are presented. Construction of large nets benefits from application of a theory of expected information for sparse data and the Dirac notation and algebra. The extent to which these are important here is briefly discussed. Purposes of the study include (a) exploration of the properties of large inference nets and a perturbation and tacit conditionality models, (b) using these to propose simpler models including one that a physician could use routinely, analogous to a "risk score", (c) examination of the merit of describing optimal performance in a single measure that combines accuracy, specificity, and sensitivity in place of a ROC curve, and (d) relationship to methods for detecting anomalous and potentially fraudulent data. Copyright © 2018 Elsevier Ltd. All rights reserved.

Sample presentation, sources of error and future perspectives on the application of vibrational spectroscopy in the wine industry.

PubMed

Cozzolino, Daniel

2015-03-30

Vibrational spectroscopy encompasses a number of techniques and methods including ultra-violet, visible, Fourier transform infrared or mid infrared, near infrared and Raman spectroscopy. The use and application of spectroscopy generates spectra containing hundreds of variables (absorbances at each wavenumbers or wavelengths), resulting in the production of large data sets representing the chemical and biochemical wine fingerprint. Multivariate data analysis techniques are then required to handle the large amount of data generated in order to interpret the spectra in a meaningful way in order to develop a specific application. This paper focuses on the developments of sample presentation and main sources of error when vibrational spectroscopy methods are applied in wine analysis. Recent and novel applications will be discussed as examples of these developments. © 2014 Society of Chemical Industry.

A test manager's perspective of a test concept for a heavy lift vehicle

NASA Technical Reports Server (NTRS)

Pargeon, John I., Jr.

1990-01-01

The developmment of a test concept is a significant part of the advanced planning activities accomplished for the Initial Operational Test and Evaluation (IOT&E) of new systems. A test concept is generally viewed as a description, including rationale, of the test structure, evaluation methodology and management approach required to plan and conduct the IOT&E of a program such as a new heavy lift launch vehicle system. The test concept as presented in this paper is made up of an operations area, a test area, an evaluation area, and a management area. The description presented here is written from the perspective of one test manager, and represents his views of a possible framework of a test concept using examples for a potential IOT&E of a heavy lift launch vehicle.

Concept Mapping Using Cmap Tools to Enhance Meaningful Learning

NASA Astrophysics Data System (ADS)

Cañas, Alberto J.; Novak, Joseph D.

Concept maps are graphical tools that have been used in all facets of education and training for organizing and representing knowledge. When learners build concept maps, meaningful learning is facilitated. Computer-based concept mapping software such as CmapTools have further extended the use of concept mapping and greatly enhanced the potential of the tool, facilitating the implementation of a concept map-centered learning environment. In this chapter, we briefly present concept mapping and its theoretical foundation, and illustrate how it can lead to an improved learning environment when it is combined with CmapTools and the Internet. We present the nationwide “Proyecto Conéctate al Conocimiento” in Panama as an example of how concept mapping, together with technology, can be adopted by hundreds of schools as a means to enhance meaningful learning.

Dynamical analysis of an n‑H‑T cosmological quintessence real gas model with a general equation of state

NASA Astrophysics Data System (ADS)

Ivanov, Rossen I.; Prodanov, Emil M.

2018-01-01

The cosmological dynamics of a quintessence model based on real gas with general equation of state is presented within the framework of a three-dimensional dynamical system describing the time evolution of the number density, the Hubble parameter and the temperature. Two global first integrals are found and examples for gas with virial expansion and van der Waals gas are presented. The van der Waals system is completely integrable. In addition to the unbounded trajectories, stemming from the presence of the conserved quantities, stable periodic solutions (closed orbits) also exist under certain conditions and these represent models of a cyclic Universe. The cyclic solutions exhibit regions characterized by inflation and deflation, while the open trajectories are characterized by inflation in a “fly-by” near an unstable critical point.

Towards Mechanistic Understanding of Mercury Availability and Toxicity to Aquatic Primary Producers.

PubMed

Dranguet, Perrine; Flück, Rebecca; Regier, Nicole; Cosio, Claudia; Le Faucheur, Séverine; Slaveykova, Vera I

2014-11-01

The present article reviews current knowledge and recent progress on the bioavailability and toxicity of mercury to aquatic primary producers. Mercury is a ubiquitous toxic trace element of global concern. At the base of the food web, primary producers are central for mercury incorporation into the food web. Here, the emphasis is on key, but still poorly understood, processes governing the interactions between mercury species and phytoplankton, and macrophytes, two representatives of primary producers. Mass transfer to biota surface, adsorption to cell wall, internalization and release from cells, as well as underlying toxicity mechanisms of both inorganic mercury and methylmercury are discussed critically. In addition, the intracellular distribution and transformation processes, their importance for mercury toxicity, species-sensitivity differences and trophic transfer are presented. The mini-review is illustrated with examples of our own research.

Putting environmental economics in perspective: case study of Four Corners Power Plant, New Mexico.

PubMed Central

Bartlit, J R

1979-01-01

Environmental control costs can be made to appear much larger in impact than they actually are by placing costs in misleading contexts or failing to provide perspective. It is essential for continued public support of environmental health programs that this practice be countered by more meaningful presentations of economic data. As an example, analytic methods appropriate to the case of a large coal-fired power plant in northwestern New Mexico are developed and disucssed. Pollution control expenditures at the Four Corners Power Plant in northwestern New Mexico were presented to the public as costing $82 annually. Although this figure may be the correct one, data were collected and analyzed to show that this cost represented an increase of only 5 to 60 cents on a $100 electricity bill for the consumer of electricity. PMID:507248

Visual and Experiential Learning Opportunities through Geospatial Data

NASA Astrophysics Data System (ADS)

Gardiner, N.; Bulletins, S.

2007-12-01

Global observation data from satellites are essential for both research and education about Earth's climate because they help convey the temporal and spatial scales inherent to the subject, which are beyond most people's experience. Experts in the development of visualizations using spatial data distinguish the process of learning through data exploration from the process of learning by absorbing a story told from beginning to end. The former requires the viewer to absorb complex spatial and temporal dynamics inherent to visualized data and therefore is a process best undertaken by those familiar with the data and processes represented. The latter requires that the viewer understand the intended presentation of concepts, so story telling can be employed to educate viewers with varying backgrounds and familiarity with a given subject. Three examples of climate science education, drawn from the current science program Science Bulletins (American Museum of Natural History, New York, USA), demonstrate the power of visualized global earth observations for climate science education. The first example seeks to explain the potential for sea level rise on a global basis. A short feature film includes the visualized, projected effects of sea level rise at local to global scales; this visualization complements laboratory and field observations of glacier retreat and paleoclimatic reconstructions based on fossilized coral reef analysis, each of which is also depicted in the film. The narrative structure keeps learners focused on discrete scientific concepts. The second example utilizes half-hourly cloud observations to demonstrate weather and climate patterns to audiences on a global basis. Here, the scientific messages are qualitatively simpler, but the viewer must deduce his own complex visual understanding of the visualized data. Finally, we present plans for distributing climate science education products via mediated public events whereby participants learn from climate and geovisualization experts working collaboratively. This last example provides an opportunity for deep exploration of patterns and processes in a live setting and makes full use of complementary talents, including computer science, internet-enabled data sharing, remote sensing image processing, and meteorology. These innovative examples from informal educators serve as powerful pedagogical models to consider for the classroom of the future.

Towards the Establishment of Criteria for Discussing Music in Terms of Symmetry and Asymmetry (an Outline)

NASA Astrophysics Data System (ADS)

Csapó, Gyula

Symmetry and asymmetry are universally present in music: our subject matter is vast, systematic applications abound. One cannot hope to do justice to this subject in an essay (only perhaps in a multi-volume book), let alone in a comprehensive manner that would include even the most important examples. The theoretical problems alone, concerning even the seemingly obvious cases, are considerable. Many of these arise from the complex, often interactive, simultaneous and temporal, i.e. multidimensional manner in which musical parameters1 behave. Thus, a rigorously systematic approach is necessary. This essay will attempt no more than to create scaffolding to facilitate future access to this subject. The bibliographical source references following the article will guide the readers to the editions of the musical examples. The terms symmetry and asymmetry (S/A for a while from here on) will be used to describe ephemeral and transitory, definitive, referential and background phenomena alike; and everything in-between. Further, S and A will be treated as a matter of degree, not as absolutes. In many instances, S/A will be thought of metaphorically or symbolically. With this caveat, many of the theoretical problems will no longer appear insurmountable. As stated before, examples of (systematic, conscious uses of) S and A in Western Art Music are universally present, all the way from Gregorian Chant to the music of Ockeghem; all the way from J.S. Bach through the Classical and Romantic eras to the increasingly conscious and mathematically ambitious applications from the Twentieth and Twenty-first Centuries (e.g. in the music of Bartók, Stravinsky, Schönberg, Webern, Boulez, Stockhausen or Xenakis). Therefore, I attempt to treat the subject by outlining the different models of how the question maybe thought of in musical terms. Specific examples will be provided to each section after the article. Although I consider these examples instructive, they by no means represent more than an arbitrary assortment of possible cases - and this fact alone is not without a pleasurable harvest of peculiar and specific conclusions in the end.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Volume II of the Site Environmental Report for 2006 is provided by Ernest Orlando Lawrence Berkeley National Laboratory as a supplemental appendix to Volume I, which contains the body of the report. Volume II contains the environmental monitoring and sampling data used to generate summary results of routine and nonroutine activities at the Laboratory (except for groundwater sampling data, which may be found in the reports referred to in Chapter 4). Volume I summarizes the results from analyses of the data. The results from sample collections are more comprehensive in Volume II than in Volume I: For completeness, all resultsmore » from sample collections that began or ended in calendar year (CY) 2006 are included in this volume. However, the samples representing CY 2005 data have not been used in the summary results that are reported in Volume I. (For example, although ambient air samples collected on January 2, 2006, are presented in Volume II, they represent December 2005 data and are not included in Table 4-2 in Volume I.)« less

A graph grammar approach to artificial life.

PubMed

Kniemeyer, Ole; Buck-Sorlin, Gerhard H; Kurth, Winfried

2004-01-01

We present the high-level language of relational growth grammars (RGGs) as a formalism designed for the specification of ALife models. RGGs can be seen as an extension of the well-known parametric Lindenmayer systems and contain rule-based, procedural, and object-oriented features. They are defined as rewriting systems operating on graphs with the edges coming from a set of user-defined relations, whereas the nodes can be associated with objects. We demonstrate their ability to represent genes, regulatory networks of metabolites, and morphologically structured organisms, as well as developmental aspects of these entities, in a common formal framework. Mutation, crossing over, selection, and the dynamics of a network of gene regulation can all be represented with simple graph rewriting rules. This is demonstrated in some detail on the classical example of Dawkins' biomorphs and the ABC model of flower morphogenesis: other applications are briefly sketched. An interactive program was implemented, enabling the execution of the formalism and the visualization of the results.

A graph-based network-vulnerability analysis system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swiler, L.P.; Phillips, C.; Gaylor, T.

1998-05-03

This paper presents a graph based approach to network vulnerability analysis. The method is flexible, allowing analysis of attacks from both outside and inside the network. It can analyze risks to a specific network asset, or examine the universe of possible consequences following a successful attack. The analysis system requires as input a database of common attacks, broken into atomic steps, specific network configuration and topology information, and an attacker profile. The attack information is matched with the network configuration information and an attacker profile to create a superset attack graph. Nodes identify a stage of attack, for example themore » class of machines the attacker has accessed and the user privilege level he or she has compromised. The arcs in the attack graph represent attacks or stages of attacks. By assigning probabilities of success on the arcs or costs representing level of effort for the attacker, various graph algorithms such as shortest path algorithms can identify the attack paths with the highest probability of success.« less

A graph-based network-vulnerability analysis system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Swiler, L.P.; Phillips, C.; Gaylor, T.

1998-01-01

This report presents a graph-based approach to network vulnerability analysis. The method is flexible, allowing analysis of attacks from both outside and inside the network. It can analyze risks to a specific network asset, or examine the universe of possible consequences following a successful attack. The analysis system requires as input a database of common attacks, broken into atomic steps, specific network configuration and topology information, and an attacker profile. The attack information is matched with the network configuration information and an attacker profile to create a superset attack graph. Nodes identify a stage of attack, for example the classmore » of machines the attacker has accessed and the user privilege level he or she has compromised. The arcs in the attack graph represent attacks or stages of attacks. By assigning probabilities of success on the arcs or costs representing level-of-effort for the attacker, various graph algorithms such as shortest-path algorithms can identify the attack paths with the highest probability of success.« less

ERTS-1, a new window on our planet

USGS Publications Warehouse

Williams, Richard S.; Carter, William Douglas

1976-01-01

The launch, on July 23, 1972, of the first Earth Resources Technology Satellite (ERTS-1) by the National Aeronautics and Space Administration was a major step forward in extending man 's ability to inventory the Earth 's resources and to evaluate objectively his impact upon the environment. ERTS spacecraft represent the first step in merging space and remote-sensing technologies into a system for inventorying and managing the Earth 's resources. Examples presented in this book demonstrate ERTS ' vast potential for inventorying resources, monitoring environmental conditions, and measuring changes. Such information is essential for the full evaluation of the Federal lands and determining their future use, as well as for improved planning of overall land use throughout the United States and the world. Ten bureaus of the U.S. Department of Interior have roles in the ERTS project. Nearly all of these participating bureaus are represented in almost 100 papers included in this book. Chapter 3 is entitled ' Applications to Water Resources ' and contains 23 separate sections. (Woodard-USGS)

[Disciplinary action and its degree of implementation].

PubMed

Gordon, M; Betzalel, S

2004-04-01

The aim of disciplinary action against dental practitioners is to uphold professional standards, to protect the safety of the patients and to maintain public confidence in the profession. Disciplinary action against dentists in Israel is based on the Dentists' Ordinance of 1979. The main principle behind disciplinary action is trial by peers, which in effect means that the profession upholds the required standards. Seven examples are mentioned in the law for which the Ministry of Health can reprimand or suspend the license of a dentist permanently or for a limited period of time. The panel for disciplinary action consists of three judges: one lawyer and two dentists--one (the chairman) represents the General Director of the Ministry of Health, the other represents the Israel Dental Association. This article deals with the form of legal discussion, types of punishment and their limitations as interpreted by the authors. All 26 complaint files presented to the disciplinary committees between 1997-2002 that were concluded are discussed. The accusations, as well as the verdicts, are listed.

A Bayesian Approach for Sensor Optimisation in Impact Identification

PubMed Central

Mallardo, Vincenzo; Sharif Khodaei, Zahra; Aliabadi, Ferri M. H.

2016-01-01

This paper presents a Bayesian approach for optimizing the position of sensors aimed at impact identification in composite structures under operational conditions. The uncertainty in the sensor data has been represented by statistical distributions of the recorded signals. An optimisation strategy based on the genetic algorithm is proposed to find the best sensor combination aimed at locating impacts on composite structures. A Bayesian-based objective function is adopted in the optimisation procedure as an indicator of the performance of meta-models developed for different sensor combinations to locate various impact events. To represent a real structure under operational load and to increase the reliability of the Structural Health Monitoring (SHM) system, the probability of malfunctioning sensors is included in the optimisation. The reliability and the robustness of the procedure is tested with experimental and numerical examples. Finally, the proposed optimisation algorithm is applied to a composite stiffened panel for both the uniform and non-uniform probability of impact occurrence. PMID:28774064

Mathematical modelling of flow distribution in the human cardiovascular system

NASA Technical Reports Server (NTRS)

Sud, V. K.; Srinivasan, R. S.; Charles, J. B.; Bungo, M. W.

1992-01-01

The paper presents a detailed model of the entire human cardiovascular system which aims to study the changes in flow distribution caused by external stimuli, changes in internal parameters, or other factors. The arterial-venous network is represented by 325 interconnected elastic segments. The mathematical description of each segment is based on equations of hydrodynamics and those of stress/strain relationships in elastic materials. Appropriate input functions provide for the pumping of blood by the heart through the system. The analysis employs the finite-element technique which can accommodate any prescribed boundary conditions. Values of model parameters are from available data on physical and rheological properties of blood and blood vessels. As a representative example, simulation results on changes in flow distribution with changes in the elastic properties of blood vessels are discussed. They indicate that the errors in the calculated overall flow rates are not significant even in the extreme case of arteries and veins behaving as rigid tubes.

Latent semantic analysis.

PubMed

Evangelopoulos, Nicholas E

2013-11-01

This article reviews latent semantic analysis (LSA), a theory of meaning as well as a method for extracting that meaning from passages of text, based on statistical computations over a collection of documents. LSA as a theory of meaning defines a latent semantic space where documents and individual words are represented as vectors. LSA as a computational technique uses linear algebra to extract dimensions that represent that space. This representation enables the computation of similarity among terms and documents, categorization of terms and documents, and summarization of large collections of documents using automated procedures that mimic the way humans perform similar cognitive tasks. We present some technical details, various illustrative examples, and discuss a number of applications from linguistics, psychology, cognitive science, education, information science, and analysis of textual data in general. WIREs Cogn Sci 2013, 4:683-692. doi: 10.1002/wcs.1254 CONFLICT OF INTEREST: The author has declared no conflicts of interest for this article. For further resources related to this article, please visit the WIREs website. © 2013 John Wiley & Sons, Ltd.

A latent class distance association model for cross-classified data with a categorical response variable.

PubMed

Vera, José Fernando; de Rooij, Mark; Heiser, Willem J

2014-11-01

In this paper we propose a latent class distance association model for clustering in the predictor space of large contingency tables with a categorical response variable. The rows of such a table are characterized as profiles of a set of explanatory variables, while the columns represent a single outcome variable. In many cases such tables are sparse, with many zero entries, which makes traditional models problematic. By clustering the row profiles into a few specific classes and representing these together with the categories of the response variable in a low-dimensional Euclidean space using a distance association model, a parsimonious prediction model can be obtained. A generalized EM algorithm is proposed to estimate the model parameters and the adjusted Bayesian information criterion statistic is employed to test the number of mixture components and the dimensionality of the representation. An empirical example highlighting the advantages of the new approach and comparing it with traditional approaches is presented. © 2014 The British Psychological Society.

Digital quantum simulators in a scalable architecture of hybrid spin-photon qubits

PubMed Central

Chiesa, Alessandro; Santini, Paolo; Gerace, Dario; Raftery, James; Houck, Andrew A.; Carretta, Stefano

2015-01-01

Resolving quantum many-body problems represents one of the greatest challenges in physics and physical chemistry, due to the prohibitively large computational resources that would be required by using classical computers. A solution has been foreseen by directly simulating the time evolution through sequences of quantum gates applied to arrays of qubits, i.e. by implementing a digital quantum simulator. Superconducting circuits and resonators are emerging as an extremely promising platform for quantum computation architectures, but a digital quantum simulator proposal that is straightforwardly scalable, universal, and realizable with state-of-the-art technology is presently lacking. Here we propose a viable scheme to implement a universal quantum simulator with hybrid spin-photon qubits in an array of superconducting resonators, which is intrinsically scalable and allows for local control. As representative examples we consider the transverse-field Ising model, a spin-1 Hamiltonian, and the two-dimensional Hubbard model and we numerically simulate the scheme by including the main sources of decoherence. PMID:26563516

Improved Discretization of Grounding Lines and Calving Fronts using an Embedded-Boundary Approach in BISICLES

NASA Astrophysics Data System (ADS)

Martin, D. F.; Cornford, S. L.; Schwartz, P.; Bhalla, A.; Johansen, H.; Ng, E.

2017-12-01

Correctly representing grounding line and calving-front dynamics is of fundamental importance in modeling marine ice sheets, since the configuration of these interfaces exerts a controlling influence on the dynamics of the ice sheet. Traditional ice sheet models have struggled to correctly represent these regions without very high spatial resolution. We have developed a front-tracking discretization for grounding lines and calving fronts based on the Chombo embedded-boundary cut-cell framework. This promises better representation of these interfaces vs. a traditional stair-step discretization on Cartesian meshes like those currently used in the block-structured AMR BISICLES code. The dynamic adaptivity of the BISICLES model complements the subgrid-scale discretizations of this scheme, producing a robust approach for tracking the evolution of these interfaces. Also, the fundamental discontinuous nature of flow across grounding lines is respected by mathematically treating it as a material phase change. We present examples of this approach to demonstrate its effectiveness.

A new method of search design of refrigerating systems containing a liquid and gaseous working medium based on the graph model of the physical operating principle

NASA Astrophysics Data System (ADS)

Yakovlev, A. A.; Sorokin, V. S.; Mishustina, S. N.; Proidakova, N. V.; Postupaeva, S. G.

2017-01-01

The article describes a new method of search design of refrigerating systems, the basis of which is represented by a graph model of the physical operating principle based on thermodynamical description of physical processes. The mathematical model of the physical operating principle has been substantiated, and the basic abstract theorems relatively semantic load applied to nodes and edges of the graph have been represented. The necessity and the physical operating principle, sufficient for the given model and intended for the considered device class, were demonstrated by the example of a vapour-compression refrigerating plant. The example of obtaining a multitude of engineering solutions of a vapour-compression refrigerating plant has been considered.

Total knee arthroplasty in patients with a previous patellectomy.

PubMed

Maslow, Jed; Zuckerman, Joseph D; Immerman, Igor

2013-01-01

Post-patellectomy patients represent a specific subgroup of patients that may develop arthritis and persistent knee pain and potentially require treatment with total knee arthroplasty. This article reviews the treatment and functional outcomes following total knee arthroplasty in patients with prior patellectomy. A case report is presented as an example of the clinical management of a post-patellectomy patient with significant knee pain and disability treated with total knee arthroplasty. Emphasis will be placed in decision- making, specifically with the use of a posterior stabilized implant. In addition, postoperative strengthening of the quadriceps is essential to compensate for the lack of the patella and increase the success of total knee arthroplasty in this subgroup of patients.

Spatial cognition

NASA Technical Reports Server (NTRS)

Kaiser, Mary Kister; Remington, Roger

1988-01-01

Spatial cognition is the ability to reason about geometric relationships in the real (or a metaphorical) world based on one or more internal representations of those relationships. The study of spatial cognition is concerned with the representation of spatial knowledge, and our ability to manipulate these representations to solve spatial problems. Spatial cognition is utilized most critically when direct perceptual cues are absent or impoverished. Examples are provided of how human spatial cognitive abilities impact on three areas of space station operator performance: orientation, path planning, and data base management. A videotape provides demonstrations of relevant phenomena (e.g., the importance of orientation for recognition of complex, configural forms). The presentation is represented by abstract and overhead visuals only.

A co-ordinated and synergistic analysis strategy for future ground-based and space helioseismology

NASA Technical Reports Server (NTRS)

Ulrich, Roger K.

1991-01-01

The variety of helioseismology observational programs planned for the mid-1990s represents an unprecedented opportunity to improve understanding of the solar interior. This review discusses the coordination of the GONG, IRIS, Birmingham and other ground-based observational programs with the space experiments on the SOHO mission: GOLF, VIRGO, and MDI. The integration and coordination of the different data streams in terms of the spatial and temporal coverage as well as the implications of the different spectral resolution and stability characteristics of each experiment are discussed. The study of the effect of active regions on various helioseismology signals is presented as an example of how ground-based and space experiments can be coordinated.

Development of a Aerothermoelastic-Acoustics Simulation Capability of Flight Vehicles

NASA Technical Reports Server (NTRS)

Gupta, K. K.; Choi, S. B.; Ibrahim, A.

2010-01-01

A novel numerical, finite element based analysis methodology is presented in this paper suitable for accurate and efficient simulation of practical, complex flight vehicles. An associated computer code, developed in this connection, is also described in some detail. Thermal effects of high speed flow obtained from a heat conduction analysis are incorporated in the modal analysis which in turn affects the unsteady flow arising out of interaction of elastic structures with the air. Numerical examples pertaining to representative problems are given in much detail testifying to the efficacy of the advocated techniques. This is a unique implementation of temperature effects in a finite element CFD based multidisciplinary simulation analysis capability involving large scale computations.

A variational dynamic programming approach to robot-path planning with a distance-safety criterion

NASA Technical Reports Server (NTRS)

Suh, Suk-Hwan; Shin, Kang G.

1988-01-01

An approach to robot-path planning is developed by considering both the traveling distance and the safety of the robot. A computationally-efficient algorithm is developed to find a near-optimal path with a weighted distance-safety criterion by using a variational calculus and dynamic programming (VCDP) method. The algorithm is readily applicable to any factory environment by representing the free workspace as channels. A method for deriving these channels is also proposed. Although it is developed mainly for two-dimensional problems, this method can be easily extended to a class of three-dimensional problems. Numerical examples are presented to demonstrate the utility and power of this method.

Organic Chemistry: From the Interstellar Medium to the Solar System

NASA Technical Reports Server (NTRS)

Sandford, Scott; Witteborn, Fred C. (Technical Monitor)

1997-01-01

This talk will review the various types of organic materials observed in different environments in the interstellar medium, discuss the processes by which these materials may have formed and been modified, and present the evidence supporting the contention that at least a fraction of this material survived incorporation, substantially unaltered, into our Solar System during its formation. The nature of this organic material is of direct interest to issues associated with the origin of life, both because this material represents a large fraction of the Solar System inventory of the biogenically-important elements, and because many of the compounds in this inventory have biogenic implications. Several specific examples of such molecules will be briefly discussed.

Effect of an eigenstrain on slow viscous flow of compressible fluid films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murray, P.E.

We present a general formulation of the mechanics of slow viscous flow of slightly compressible fluid films in the presence of an eigenstrain. An eigenstrain represents a constrained volume change due to temperature, concentration of a dissolved species, or a chemical transformation. A silicon dioxide film grown on a silicon surface is an example of a viscous fluid film that is affected by a constrained volume change. We obtain a general expression for pressure in a fluid film produced by a surface chemical reaction accompanied by a volume change. This result is used to study the effect of an eigenstrainmore » on viscous stress relaxation in fluid films.« less

Highlights of contractor initiatives in quality enhancement and productivity improvement

NASA Technical Reports Server (NTRS)

1986-01-01

The NASA/Contractor Team efforts are presented as part of NASA's continuing effort to facilitate the sharing of quality and productivity improvement ideas among its contractors. This complilation is not meant to be a comprehensive review of contractor initiative nor does it necessarily express NASA's views. The submissions represent samples from a general survey, and were not edited by NASA. The efforts are examples of quality and productivity programs in private industry, and as such, highlight company efforts in individual areas. Topics range from modernization of equipment, hardware, and technology to management of human resources. Of particular interest are contractor initiatives which deal with measurement and evaluation data pertaining to quality and productivity performance.

Nano-swimmers in biological membranes and propulsion hydrodynamics in two dimensions.

PubMed

Huang, Mu-Jie; Chen, Hsuan-Yi; Mikhailov, Alexander S

2012-11-01

Active protein inclusions in biological membranes can represent nano-swimmers and propel themselves in lipid bilayers. A simple model of an active inclusion with three particles (domains) connected by variable elastic links is considered. First, the membrane is modeled as a two-dimensional viscous fluid and propulsion behavior in two dimensions is examined. After that, an example of a microscopic dynamical simulation is presented, where the lipid bilayer structure of the membrane is resolved and the solvent effects are included by multiparticle collision dynamics. Statistical analysis of data reveals ballistic motion of the swimmer, in contrast to the classical diffusion behavior found in the absence of active transitions between the states.

Nuclear Engine System Simulation (NESS) version 2.0

NASA Technical Reports Server (NTRS)

Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman J.

1993-01-01

The topics are presented in viewgraph form and include the following; nuclear thermal propulsion (NTP) engine system analysis program development; nuclear thermal propulsion engine analysis capability requirements; team resources used to support NESS development; expanded liquid engine simulations (ELES) computer model; ELES verification examples; NESS program development evolution; past NTP ELES analysis code modifications and verifications; general NTP engine system features modeled by NESS; representative NTP expander, gas generator, and bleed engine system cycles modeled by NESS; NESS program overview; NESS program flow logic; enabler (NERVA type) nuclear thermal rocket engine; prismatic fuel elements and supports; reactor fuel and support element parameters; reactor parameters as a function of thrust level; internal shield sizing; and reactor thermal model.

Machine Learning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chikkagoudar, Satish; Chatterjee, Samrat; Thomas, Dennis G.

The absence of a robust and unified theory of cyber dynamics presents challenges and opportunities for using machine learning based data-driven approaches to further the understanding of the behavior of such complex systems. Analysts can also use machine learning approaches to gain operational insights. In order to be operationally beneficial, cybersecurity machine learning based models need to have the ability to: (1) represent a real-world system, (2) infer system properties, and (3) learn and adapt based on expert knowledge and observations. Probabilistic models and Probabilistic graphical models provide these necessary properties and are further explored in this chapter. Bayesian Networksmore » and Hidden Markov Models are introduced as an example of a widely used data driven classification/modeling strategy.« less

Critical Review of Hamby's (2014) Article Titled "Intimate Partner and Sexual Violence Research, Scientific Progress, Scientific Challenges, and Gender".

PubMed

Winstok, Zeev

2015-07-28

In a recent article, Hamby advocates the replacement of the "old" Conflict Tactic Scales used to measure physical partner violence (PV) with a new measurement instrument that represents and supports a thesis that gender use of physical PV is asymmetrical rather than symmetrical. This article takes a critical look at the logic, assumptions, arguments, examples, interpretations, and conclusions, presented in Hamby's article, and in some cases disagrees with them. Furthermore, this article uses Hamby's proposals as an opportunity to review and examine core issues in the study of perpetration of physical PV, including gender-related theoretical and methodological issues. © The Author(s) 2015.

A software technology evaluation program

NASA Technical Reports Server (NTRS)

Novaes-Card, David N.

1985-01-01

A set of quantitative approaches is presented for evaluating software development methods and tools. The basic idea is to generate a set of goals which are refined into quantifiable questions which specify metrics to be collected on the software development and maintenance process and product. These metrics can be used to characterize, evaluate, predict, and motivate. They can be used in an active as well as passive way by learning form analyzing the data and improving the methods and tools based upon what is learned from that analysis. Several examples were given representing each of the different approaches to evaluation. The cost of the approaches varied inversely with the level of confidence in the interpretation of the results.

Optical spectroscopy of ancient paper and textiles

NASA Astrophysics Data System (ADS)

Missori, M.

2016-03-01

Ancient paper and textiles represent a striking example of optically inhomogenous materials whose optical responses are strongly governed by scattering effects. In order to recover the absorption coefficient from non-invasive and non-destructive reflectance measurements a specific approach based on Kubelka-Munk two-flux theory must be applied. In this way quantitative chemical information, such as chromophores concentration, can be obtained, as well as quantitative spectra of additional substances such as pigments or dyes. Results on a folio of the Codex on the Flight of Birds by Leonardo da Vinci and a linen cloth dated back to 1653 and called the Shroud of Arquata, a copy of the Shroud of Turin, will be presented.

Virtual World Astrosociology

NASA Astrophysics Data System (ADS)

Bainbridge, William Sims

2010-01-01

This essay introduces the opportunity for theory development and even empirical research on some aspects of astrosociology through today's online virtual worlds. The examples covered present life on other planets or in space itself, in a manner that can be experienced by the user and where the user's reactions may simulate to some degree future human behavior in real extraterrestrial environments: Tabula Rasa, Anarchy Online, Entropia Universe, EVE Online, StarCraft and World of Warcraft. Ethnographic exploration of these computerized environments raises many questions about the social science both of space exploration and of direct contact with extraterrestrials. The views expressed in this essay do not necessarily represent the views of the National Science Foundation or the United States.

Coherent Manipulation of Phonons at the Nanoscale

NASA Astrophysics Data System (ADS)

Yu, Shangjie; Ouyang, Min

Phonons play a key role in almost every physical process, including for example dephasing phenomena of electronic quantum states, electric and heat transports. Therefore, understanding and even manipulating phonons represent a pre-requisite for tailoring phonons-mediated physical processes. In this talk, we will first present how to employ ultrafast optical spectroscopy to probe acoustic phonon modes in colloidal metallic nanoparticles. Furthermore, we have developed various phonon manipulation schemes that can be achieved by a train of optical pulses in time domain to allow selective control of phonon modes. Our theoretical modeling and simulation demonstrates an excellent agreement with experimental results, thus providing a future guideline on more complex phononic control at the nanoscale.

Multi-enzyme logic network architectures for assessing injuries: digital processing of biomarkers.

PubMed

Halámek, Jan; Bocharova, Vera; Chinnapareddy, Soujanya; Windmiller, Joshua Ray; Strack, Guinevere; Chuang, Min-Chieh; Zhou, Jian; Santhosh, Padmanabhan; Ramirez, Gabriela V; Arugula, Mary A; Wang, Joseph; Katz, Evgeny

2010-12-01

A multi-enzyme biocatalytic cascade processing simultaneously five biomarkers characteristic of traumatic brain injury (TBI) and soft tissue injury (STI) was developed. The system operates as a digital biosensor based on concerted function of 8 Boolean AND logic gates, resulting in the decision about the physiological conditions based on the logic analysis of complex patterns of the biomarkers. The system represents the first example of a multi-step/multi-enzyme biosensor with the built-in logic for the analysis of complex combinations of biochemical inputs. The approach is based on recent advances in enzyme-based biocomputing systems and the present paper demonstrates the potential applicability of biocomputing for developing novel digital biosensor networks.

Models of Invisibility: Rendering Domestic and Other Gendered Violence Visible to Students Through Clinical Law Teaching.

PubMed

MacDowell, Elizabeth L; Cammett, Ann

2016-10-01

The proliferation of university courses about domestic violence includes clinical courses in law schools in which students represent victims in their legal cases. This essay advocates for a broader approach to teaching about the problem. Using examples from their clinic cases, the authors show how teachers can overcome pedagogical challenges and render domestic and other forms of gendered violence, including state and community violence, more visible to students by intentionally raising and placing it within larger frameworks of structural inequality. In this way, students learn to identify and address gendered violence even when it is not the presenting problem. © The Author(s) 2016.

Fatigue Effects on Human Performance in Combat: A Literature Review. Volume 1

DTIC Science & Technology

1991-08-01

sleep data to assess if there was a tie between sleep patterns/levels and the subjectively rated unit performance. HTI also examined pro- and post ...vertical functional systems. This choice of "level of resolution" is based upon a requirement to represent the fact that not all subunits of, for example ...were initiated, in particular, engagement and synchronization across vertical functional systems. NTC results also provided examples of the extreme

Encapsulation of an interpenetrated diamondoid inorganic building block in a metal-organic framework.

PubMed

Zhang, Huabin; Lin, Ping; Chen, Erxia; Tan, Yanxi; Wen, Tian; Aldalbahi, Ali; Alshehri, Saad M; Yamauchi, Yusuke; Du, Shaowu; Zhang, Jian

2015-03-23

The first example of an inorganic-organic composite framework with an interpenetrated diamondoid inorganic building block, featuring unique {InNa}n helices and {In12 Na16 } nano-rings, has been constructed and structurally characterized. This framework also represents a unique example of encapsulation of an interpenetrated diamondoid inorganic building block in a metal-organic framework. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Masked Proportional Routing

NASA Technical Reports Server (NTRS)

Wolpert, David

2004-01-01

Masked proportional routing is an improved procedure for choosing links between adjacent nodes of a network for the purpose of transporting an entity from a source node ("A") to a destination node ("B"). The entity could be, for example, a physical object to be shipped, in which case the nodes would represent waypoints and the links would represent roads or other paths between waypoints. For another example, the entity could be a message or packet of data to be transmitted from A to B, in which case the nodes could be computer-controlled switching stations and the links could be communication channels between the stations. In yet another example, an entity could represent a workpiece while links and nodes could represent, respectively, manufacturing processes and stages in the progress of the workpiece towards a finished product. More generally, the nodes could represent states of an entity and the links could represent allowed transitions of the entity. The purpose of masked proportional routing and of related prior routing procedures is to schedule transitions of entities from their initial states ("A") to their final states ("B") in such a manner as to minimize a cost or to attain some other measure of optimality or efficiency. Masked proportional routing follows a distributed (in the sense of decentralized) approach to probabilistically or deterministically choosing the links. It was developed to satisfy a need for a routing procedure that 1. Does not always choose the same link(s), even for two instances characterized by identical estimated values of associated cost functions; 2. Enables a graceful transition from one set of links to another set of links as the circumstances of operation of the network change over time; 3. Is preferably amenable to separate optimization of different portions of the network; 4. Is preferably usable in a network in which some of the routing decisions are made by one or more other procedure(s); 5. Preferably does not cause an entity to visit the same node twice; and 6. Preferably can be modified so that separate entities moving from A to B do not arrive out of order.

An information-theoretical perspective on weighted ensemble forecasts

NASA Astrophysics Data System (ADS)

Weijs, Steven V.; van de Giesen, Nick

2013-08-01

This paper presents an information-theoretical method for weighting ensemble forecasts with new information. Weighted ensemble forecasts can be used to adjust the distribution that an existing ensemble of time series represents, without modifying the values in the ensemble itself. The weighting can, for example, add new seasonal forecast information in an existing ensemble of historically measured time series that represents climatic uncertainty. A recent article in this journal compared several methods to determine the weights for the ensemble members and introduced the pdf-ratio method. In this article, a new method, the minimum relative entropy update (MRE-update), is presented. Based on the principle of minimum discrimination information, an extension of the principle of maximum entropy (POME), the method ensures that no more information is added to the ensemble than is present in the forecast. This is achieved by minimizing relative entropy, with the forecast information imposed as constraints. From this same perspective, an information-theoretical view on the various weighting methods is presented. The MRE-update is compared with the existing methods and the parallels with the pdf-ratio method are analysed. The paper provides a new, information-theoretical justification for one version of the pdf-ratio method that turns out to be equivalent to the MRE-update. All other methods result in sets of ensemble weights that, seen from the information-theoretical perspective, add either too little or too much (i.e. fictitious) information to the ensemble.

Application of laboratory permeability data

USGS Publications Warehouse

Johnson, A.I.

1963-01-01

Some of the basic material contained in this report originally was prepared in 1952 as instructional handouts for ground-water short courses and for training of foreign participants. The material has been revised and expanded and is presented in the present form to make it more readily available to the field hydrologist. Illustrations now present published examples of the applications suggested in the 1952 material. For small areas, a field pumping test is sufficient to predict the characteristics of an aquifer. With a large area under study, the aquifer properties must be determined at many different locations and it is not usually economically feasible to make sufficient field tests to define the aquifer properties in detail for the whole aquifer. By supplementing a few field tests with laboratory permeability data and geologic interpretation, more point measurements representative of the hydrologic properties of the aquifer may be obtained. A sufficient number of samples seldom can be obtained to completely identify the permeability or transmissibility in detail for a project area. However, a few judiciously chosen samples of high quality, combined with good geologic interpretation, often will permit the extrapolation of permeability information over a large area with a fair degree of reliability. The importance of adequate geologic information, as well as the importance of collecting samples representative of at least all major textural units lying within the section or area of study, cannot be overemphasized.

Tolman lengths and rigidity constants of multicomponent fluids: Fundamental theory and numerical examples

NASA Astrophysics Data System (ADS)

Aasen, Ailo; Blokhuis, Edgar M.; Wilhelmsen, Øivind

2018-05-01

The curvature dependence of the surface tension can be described by the Tolman length (first-order correction) and the rigidity constants (second-order corrections) through the Helfrich expansion. We present and explain the general theory for this dependence for multicomponent fluids and calculate the Tolman length and rigidity constants for a hexane-heptane mixture by use of square gradient theory. We show that the Tolman length of multicomponent fluids is independent of the choice of dividing surface and present simple formulae that capture the change in the rigidity constants for different choices of dividing surface. For multicomponent fluids, the Tolman length, the rigidity constants, and the accuracy of the Helfrich expansion depend on the choice of path in composition and pressure space along which droplets and bubbles are considered. For the hexane-heptane mixture, we find that the most accurate choice of path is the direction of constant liquid-phase composition. For this path, the Tolman length and rigidity constants are nearly linear in the mole fraction of the liquid phase, and the Helfrich expansion represents the surface tension of hexane-heptane droplets and bubbles within 0.1% down to radii of 3 nm. The presented framework is applicable to a wide range of fluid mixtures and can be used to accurately represent the surface tension of nanoscopic bubbles and droplets.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hurst, Aaron M.

A data structure based on an eXtensible Markup Language (XML) hierarchy according to experimental nuclear structure data in the Evaluated Nuclear Structure Data File (ENSDF) is presented. A Python-coded translator has been developed to interpret the standard one-card records of the ENSDF datasets, together with their associated quantities defined according to field position, and generate corresponding representative XML output. The quantities belonging to this mixed-record format are described in the ENSDF manual. Of the 16 ENSDF records in total, XML output has been successfully generated for 15 records. An XML-translation for the Comment Record is yet to be implemented; thismore » will be considered in a separate phase of the overall translation effort. Continuation records, not yet implemented, will also be treated in a future phase of this work. Several examples are presented in this document to illustrate the XML schema and methods for handling the various ENSDF data types. However, the proposed nomenclature for the XML elements and attributes need not necessarily be considered as a fixed set of constructs. Indeed, better conventions may be suggested and a consensus can be achieved amongst the various groups of people interested in this project. The main purpose here is to present an initial phase of the translation effort to demonstrate the feasibility of interpreting ENSDF datasets and creating a representative XML-structured hierarchy for data storage.« less

Plants and geographical names in Croatia.

PubMed

Cargonja, Hrvoje; Daković, Branko; Alegro, Antun

2008-09-01

The main purpose of this paper is to present some general observations, regularities and insights into a complex relationship between plants and people through symbolic systems like geographical names on the territory of Croatia. The basic sources of data for this research were maps from atlas of Croatia of the scale 1:100000. Five groups of maps or areas were selected in order to represent main Croatian phytogeographic regions. A selection of toponyms from each of the map was made in which the name for a plant in Croatian language was recognized (phytotoponyms). Results showed that of all plant names recognized in geographical names the most represented are trees, and among them birch and oak the most. Furthermore, an attempt was made to explain the presence of the most represented plant species in the phytotoponyms in the light of general phytogeographical and sociocultural differences and similarities of comparing areas. The findings confirm an expectation that the genera of climazonal vegetation of particular area are the most represented among the phytotoponyms. Nevertheless, there are ample examples where representation of a plant name in the names of human environment can only be ascribed to ethno-linguistic and socio-cultural motives. Despite the reductionist character of applied methodology, this research also points out some advantages of this approach for ethnobotanic and ethnolinguistic studies of greater areas of human environment.

Why do we have such difficulty assessing aerosol impacts in Southeast Asia? Examining the representativeness of regional in situ, remote sensing, and modeling data using examples from a recent field trial

NASA Astrophysics Data System (ADS)

Reid, J.; Hyer, E. J.; Lagrosas, N.; Salinas Cortijo, S. V.; Campbell, J. R.; Chew, B.; Cook, J.; Di Girolamo, L.; Kuciauskas, A. P.; Johnson, R. S.; Jonsson, H.; Lynch, P.; Sessions, W.; Simpas, J. B.; Turk, F. J.; Wang, J.

2012-12-01

Southeast Asia faces numerous climate change issues, and the interaction between aerosol particles, clouds, and precipitation is thought to impact the environment in this region at both weather and climate scales. Aerosol particles have direct radiative effects, indirect effects through interaction with clouds and precipitation, and also act as a tracer for other processes affecting the carbon cycle or atmospheric chemistry. Southeast Asia also hosts some of the most complex meteorological phenomenon of the world, challenging in situ, remote sensing and modeling systems. Indeed, there is more diversity in satellite based aerosol, fire, cloud, and precipitation products in Southeast Asia than perhaps anywhere else in the world outside of the poles. In addition to serious direct challenges to aerosol observability in Southeast Asia, such as persistent ubiquitous cloud cover, there are also contextual biases (such as for aerosol retrievals the classic clear sky bias). Contextual bias affects the representativeness of nearly all aerosol assessments in Southeast Asia. As part of the 7 Southeast Asian Studies (7SEAS) program, a small intensive study was conducted in Singapore and the Palawan Archipelago in September 2011 to study the flow of biomass burning smoke through the South China/East Sea and into the summertime monsoonal trough. Analysis of field data coupled with multiple satellite and model products allowed us to investigate questions on the representativeness of data and to what extent they capture the 'true' state of the meteorological and aerosol environment. Four specific representativeness issues are presented based on IOP examples: 1) Individual biases in retrievals or model simulations; 2) Sampling biases at short time scales based on product coverage; 3) Temporal and spatial scale biases inherent in large and point based measurements; 4) Contextual biases that develop from the aggregation of data products. Considering all four of these issues we conclude with a discussion of strategies for hypothesis testing and the development of regional state vectors with realistic uncertainties.

29 CFR 1960.59 - Training of employees and employee representatives.

Code of Federal Regulations, 2010 CFR

2010-07-01

... specialized job safety and health training appropriate to the work performed by the employee, for example: Clerical; printing; welding; crane operation; chemical analysis, and computer operations. Such training...

Environmental Regulations as Drivers of Materials Obsolescence

NASA Technical Reports Server (NTRS)

Scroggins, Sharon

2010-01-01

This slide presentation reviews the operations of the Principal Center for Regulatory Risk Analysis and Communication (RRAC-PC) and the impact of environmental regulations in making some materials obsolete. The center is NASA's resource for identifying and managing risks associated with changing environmental regulations. To this end the center acts as an regulatory early warning system, to review track and analyze emerging regulations, collaborate with the technical community on regulatory risk analysis and interpretation and to represent NASA's interests to the regulatory agencies. Regulations frequently result in making some materials unavailable forcing a change to another material. Processes may also be changed due to environmental regulations. For example some items that were sprayed with a chemical may now have to be painted or dipped with the chemical. Sometimes a regulation changes the use of a certain product, which does not affect the usage on Earth, but has significant implications in space. An example of this is the use of lead-free solders of basically tin, which don't appear to have any problem on Earth, but in space applications tin whiskers have resulted in several confirmed satellite failures.

Arc_Mat: a Matlab-based spatial data analysis toolbox

NASA Astrophysics Data System (ADS)

Liu, Xingjian; Lesage, James

2010-03-01

This article presents an overview of Arc_Mat, a Matlab-based spatial data analysis software package whose source code has been placed in the public domain. An earlier version of the Arc_Mat toolbox was developed to extract map polygon and database information from ESRI shapefiles and provide high quality mapping in the Matlab software environment. We discuss revisions to the toolbox that: utilize enhanced computing and graphing capabilities of more recent versions of Matlab, restructure the toolbox with object-oriented programming features, and provide more comprehensive functions for spatial data analysis. The Arc_Mat toolbox functionality includes basic choropleth mapping; exploratory spatial data analysis that provides exploratory views of spatial data through various graphs, for example, histogram, Moran scatterplot, three-dimensional scatterplot, density distribution plot, and parallel coordinate plots; and more formal spatial data modeling that draws on the extensive Spatial Econometrics Toolbox functions. A brief review of the design aspects of the revised Arc_Mat is described, and we provide some illustrative examples that highlight representative uses of the toolbox. Finally, we discuss programming with and customizing the Arc_Mat toolbox functionalities.

Dissemination and Implementation Research for Occupational Safety and Health.

PubMed

Dugan, Alicia G; Punnett, Laura

2017-12-01

The translation of evidence-based health innovations into real-world practice is both incomplete and exceedingly slow. This represents a poor return on research investment dollars for the general public. U.S. funders of health sciences research (e.g., NIH, CDC, NIOSH) are increasingly calling for dissemination plans, and to a lesser extent for dissemination and implementation (D&I) research, which are studies that examine the effectiveness of D&I efforts and strategies and the predictors of D&I success. For example, rather than merely broadcasting information about a preventable hazard, D&I research in occupational safety and health (OSH) might examine how employers or practitioners are most likely to receive and act upon that information. We propose here that D&I research should be seen as a dedicated and necessary area of study within OSH, as a way to generate new knowledge that can bridge the research-to-practice gap. We present D&I concepts, frameworks, and examples that can increase the capacity of OSH professionals to conduct D&I research and accelerate the translation of research findings into meaningful everyday practice to improve worker safety and health.

Fuzzy tree automata and syntactic pattern recognition.

PubMed

Lee, E T

1982-04-01

An approach of representing patterns by trees and processing these trees by fuzzy tree automata is described. Fuzzy tree automata are defined and investigated. The results include that the class of fuzzy root-to-frontier recognizable ¿-trees is closed under intersection, union, and complementation. Thus, the class of fuzzy root-to-frontier recognizable ¿-trees forms a Boolean algebra. Fuzzy tree automata are applied to processing fuzzy tree representation of patterns based on syntactic pattern recognition. The grade of acceptance is defined and investigated. Quantitative measures of ``approximate isosceles triangle,'' ``approximate elongated isosceles triangle,'' ``approximate rectangle,'' and ``approximate cross'' are defined and used in the illustrative examples of this approach. By using these quantitative measures, a house, a house with high roof, and a church are also presented as illustrative examples. In addition, three fuzzy tree automata are constructed which have the capability of processing the fuzzy tree representations of ``fuzzy houses,'' ``houses with high roofs,'' and ``fuzzy churches,'' respectively. The results may have useful applications in pattern recognition, image processing, artificial intelligence, pattern database design and processing, image science, and pictorial information systems.

[VGKC-complex antibodies].

PubMed

Watanabe, Osamu

2013-04-01

Various antibodies are associated with voltage-gated potassium channels (VGKCs). Representative antibodies to VGKCs were first identified by radioimmunoassays using radioisotope-labeled alpha-dendrotoxin-VGKCs solubilized from rabbit brain. These antibodies were detected only in a proportion of patients with acquired neuromyotonia (Isaacs' syndrome). VGKC antibodies were also detected in patients with Morvan's syndrome and in those with a form of autoimmune limbic encephalitis. Recent studies indicated that the "VGKC" antibodies are mainly directed toward associated proteins (for example LGI-1 and CASPR-2) that complex with the VGKCs themselves. The "VGKC" antibodies are now commonly known as VGKC-complex antibodies. In general, LGI-1 antibodies are most commonly detected in patients with limbic encephalitis with syndrome of inappropriate secretion of antidiuretic hormone. CASPR-2 antibodies are present in the majority of patients with Morvan's syndrome. These patients develop combinations of CNS symptoms, autonomic dysfunction, and peripheral nerve hyperexcitability. Furthermore, VGKC-complex antibodies are tightly associated with chronic idiopathic pain. Hyperexcitability of nociceptive pathways has also been implicated. These antibodies may be detected in sera of some patients with neurodegenerative diseases (for example, amyotrophic lateral sclerosis and Creutzfeldt-Jakob disease).

Scaling Laws Applied to a Modal Formulation of the Aeroservoelastic Equations

NASA Technical Reports Server (NTRS)

Pototzky, Anthony S.

2002-01-01

A method of scaling is described that easily converts the aeroelastic equations of motion of a full-sized aircraft into ones of a wind-tunnel model. To implement the method, a set of rules is provided for the conversion process involving matrix operations with scale factors. In addition, a technique for analytically incorporating a spring mounting system into the aeroelastic equations is also presented. As an example problem, a finite element model of a full-sized aircraft is introduced from the High Speed Research (HSR) program to exercise the scaling method. With a set of scale factor values, a brief outline is given of a procedure to generate the first-order aeroservoelastic analytical model representing the wind-tunnel model. To verify the scaling process as applied to the example problem, the root-locus patterns from the full-sized vehicle and the wind-tunnel model are compared to see if the root magnitudes scale with the frequency scale factor value. Selected time-history results are given from a numerical simulation of an active-controlled wind-tunnel model to demonstrate the utility of the scaling process.

Multi-fuel driven Janus micromotors.

PubMed

Gao, Wei; D'Agostino, Mattia; Garcia-Gradilla, Victor; Orozco, Jahir; Wang, Joseph

2013-02-11

Here the first example of a chemically powered micromotor that harvests its energy from the reactions of three different fuels is presented. The new Al/Pd Janus microspheres-prepared by depositing a Pd layer on one side of Al microparticles-are propelled efficiently by the thrust of hydrogen bubbles generated from different reactions of Al in strong acidic and alkaline environments, and by an oxygen bubble thrust produced at their partial Pd coating in hydrogen peroxide media. High speeds and long lifetimes of 200 μm s(-1) and 8 min are achieved in strong alkaline media and acidic media, respectively. The ability to autonomously adapt to the presence of a new fuel (surrounding environment), without compromising the propulsion behavior is illustrated. These data also represent the first example of a chemically powered micromotor that propels autonomously and efficiently in alkaline environments (pH > 11) without additional fuels. The ability to use multiple fuel sources to power the same micromotor offers a broader scope of operation and considerable promise for diverse applications of micromotors in different chemical environments. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Recurrent Neural Network for Computing the Drazin Inverse.

PubMed

Stanimirović, Predrag S; Zivković, Ivan S; Wei, Yimin

2015-11-01

This paper presents a recurrent neural network (RNN) for computing the Drazin inverse of a real matrix in real time. This recurrent neural network (RNN) is composed of n independent parts (subnetworks), where n is the order of the input matrix. These subnetworks can operate concurrently, so parallel and distributed processing can be achieved. In this way, the computational advantages over the existing sequential algorithms can be attained in real-time applications. The RNN defined in this paper is convenient for an implementation in an electronic circuit. The number of neurons in the neural network is the same as the number of elements in the output matrix, which represents the Drazin inverse. The difference between the proposed RNN and the existing ones for the Drazin inverse computation lies in their network architecture and dynamics. The conditions that ensure the stability of the defined RNN as well as its convergence toward the Drazin inverse are considered. In addition, illustrative examples and examples of application to the practical engineering problems are discussed to show the efficacy of the proposed neural network.

NASA's Astronomy Education Program: Reaching Diverse Audiences

NASA Astrophysics Data System (ADS)

Hasan, Hashima; Smith, Denise Anne; Hertz, Paul; Meinke, Bonnie

2015-08-01

An overview will be given of the rich programs developed by NASA to inject the science from it's Astrophysics missions into STEM activities targeted to diverse audiences. For example, Astro4Girls was started as a pilot program during IYA2009. This program partners NASA astrophysics education programs with public libraries to provide NASA-themed hands-on education activities for girls and their families, and has been executed across the country. School curricula and NASA websites have been translated in Spanish; Braille books have been developed for the visually impaired; programs have been developed for the hearing impaired. Special effort has been made to reach underrepresented minorities. Audiences include students, teachers, and the general public through formal and informal education settings, social media and other outlets. NASA Astrophysics education providers include teams embedded in its space flight missions; professionals selected though peer reviewed programs; as well as the Science Mission Directorate Astrophysics Education forum. Representative examples will be presented to demonstrate the reach of NASA education programs, as well as an evaluation of the effectiveness of these programs.

Detection of symmetric homoclinic orbits to saddle-centres in reversible systems

NASA Astrophysics Data System (ADS)

Yagasaki, Kazuyuki; Wagenknecht, Thomas

2006-02-01

We present a perturbation technique for the detection of symmetric homoclinic orbits to saddle-centre equilibria in reversible systems of ordinary differential equations. We assume that the unperturbed system has primary, symmetric homoclinic orbits, which may be either isolated or appear in a family, and use an idea similar to that of Melnikov’s method to detect homoclinic orbits in their neighbourhood. This technique also allows us to identify bifurcations of unperturbed or perturbed, symmetric homoclinic orbits. Our technique is of importance in applications such as nonlinear optics and water waves since homoclinic orbits to saddle-centre equilibria describe embedded solitons (ESs) in systems of partial differential equations representing physical models, and except for special cases their existence has been previously studied only numerically using shooting methods and continuation techniques. We apply the general theory to two examples, a four-dimensional system describing ESs in nonlinear optical media and a six-dimensional system which can possess a one-parameter family of symmetric homoclinic orbits in the unperturbed case. For these examples, the analysis is compared with numerical computations and an excellent agreement between both results is found.

NASTRAN forced vibration analysis of rotating cyclic structures

NASA Technical Reports Server (NTRS)

Elchuri, V.; Smith, G. C. C.; Gallo, A. M.

1983-01-01

Theoretical aspects of a new capability developed and implemented in NASTRAN level 17.7 to analyze forced vibration of a cyclic structure rotating about its axis of symmetry are presented. Fans, propellers, and bladed shrouded discs of turbomachines are some examples of such structures. The capability includes the effects of Coriolis and centripetal accelerations on the rotating structure which can be loaded with: (1) directly applied loads moving with the structure and (2) inertial loas due to the translational acceleration of the axis of rotation (''base' acceleration). Steady-state sinusoidal or general periodic loads are specified to represent: (1) the physical loads on various segments of the complete structure, or (2) the circumferential harmonic components of the loads in (1). The cyclic symmetry feature of the rotating structure is used in deriving and solving the equations of forced motion. Consequently, only one of the cyclic sectors is modelled and analyzed using finite elements, yielding substantial savings in the analysis cost. Results, however, are obtained for the entire structure. A tuned twelve bladed disc example is used to demonstrate the various features of the capability.

Rare and unusual ... or are they? Less commonly diagnosed encephalopathies associated with systemic disease.

PubMed

Weathers, Allison L; Lewis, Steven L

2009-04-01

Encephalopathy due to hepatic or renal failure, electrolyte disturbances, or the administration of benzodiazepines and narcotics is commonly encountered, well reviewed in the literature, and, therefore, not usually missed. This article focuses on encephalopathies that were previously well described but may be overlooked by modern clinicians, as well as those that are still taught in the classroom but seldom thought of in practice. Due to the presumed relative rarity of these cases and emphasis on the well-memorized "classic" clinical presentations, these often treatable, and perhaps not so rare, encephalopathies due to systemic medical illness may go undiagnosed and untreated. Pancreatic encephalopathy, Wernicke's encephalopathy, and pellagra encephalopathy are reviewed in detail; cefepime and ifosfamide encephalopathies are discussed as examples of specific medication-induced encephalopathies. Septic encephalopathy, central pontine myelinolysis, and fat embolism syndrome are briefly reviewed. The encephalopathies reviewed have the potential for devastating neurological consequences if recognition and, therefore, treatment are delayed. Clinical improvement for many of these syndromes depends on prompt intervention. This article highlights some representative examples of less-commonly diagnosed metabolic and toxic encephalopathies.

Topological and behavioral disorder in collective motion

NASA Astrophysics Data System (ADS)

Quint, David

2014-03-01

A major underlying assumption in many studies on the collective motion of self-propelled agents has been that the environment is continuous, isotropic and ordered and agents are all identical. In the natural world there are many examples of disordered environments or heterogeneous swarms where collective motion can exist. Examples include bats that navigate natural caverns via echolocation, schools of fish that maneuver through dark and light areas, microbial colonies that move about in heterogeneous soil, quorum sensing bacteria, crowds of people that are evacuating a building and traffic flow in major cities. In general disorder can arise from two basic sources that inhibit/augment both movement and information flow, those that represent physical obstacles (i.e topological), (extrinsic), and those that arise from behavioral heterogeneties within the swarm itself (intrinsic). In either case, extrinsic or intrinsic, disorder can be quenched or dynamic in space or time or both. To understand the effect of the various forms of disorder that can be present in the environment of the agents, we study both discrete and continuous 2 d agent based models that utilize only local interactions and study the transition to the collectively moving state as a function of the amount of disorder or behavioral heterogeneities present in the environment. I will present our recent results and discuss the effect that disorder has on collective motion and the general physical mechanisms that swarms, either real or artificial, could utilize in order to overcome disorder in their environment.

Modeling fibrous biological tissues with a general invariant that excludes compressed fibers

NASA Astrophysics Data System (ADS)

Li, Kewei; Ogden, Ray W.; Holzapfel, Gerhard A.

2018-01-01

Dispersed collagen fibers in fibrous soft biological tissues have a significant effect on the overall mechanical behavior of the tissues. Constitutive modeling of the detailed structure obtained by using advanced imaging modalities has been investigated extensively in the last decade. In particular, our group has previously proposed a fiber dispersion model based on a generalized structure tensor. However, the fiber tension-compression switch described in that study is unable to exclude compressed fibers within a dispersion and the model requires modification so as to avoid some unphysical effects. In a recent paper we have proposed a method which avoids such problems, but in this present study we introduce an alternative approach by using a new general invariant that only depends on the fibers under tension so that compressed fibers within a dispersion do not contribute to the strain-energy function. We then provide expressions for the associated Cauchy stress and elasticity tensors in a decoupled form. We have also implemented the proposed model in a finite element analysis program and illustrated the implementation with three representative examples: simple tension and compression, simple shear, and unconfined compression on articular cartilage. We have obtained very good agreement with the analytical solutions that are available for the first two examples. The third example shows the efficacy of the fibrous tissue model in a larger scale simulation. For comparison we also provide results for the three examples with the compressed fibers included, and the results are completely different. If the distribution of collagen fibers is such that it is appropriate to exclude compressed fibers then such a model should be adopted.

Do Example Sentences Work in Direct Vocabulary Learning?

ERIC Educational Resources Information Center

Baicheng, Zhang

2009-01-01

In the present study of language learning, three presentation modes (varying from providing or not providing example sentences by the teacher and by the students themselves) have been utilised to examine the effectiveness of using example sentences in vocabulary presentation and learning activities. The study is of 58 English majors as the…

Representing Learning With Graphical Models

NASA Technical Reports Server (NTRS)

Buntine, Wray L.; Lum, Henry, Jr. (Technical Monitor)

1994-01-01

Probabilistic graphical models are being used widely in artificial intelligence, for instance, in diagnosis and expert systems, as a unified qualitative and quantitative framework for representing and reasoning with probabilities and independencies. Their development and use spans several fields including artificial intelligence, decision theory and statistics, and provides an important bridge between these communities. This paper shows by way of example that these models can be extended to machine learning, neural networks and knowledge discovery by representing the notion of a sample on the graphical model. Not only does this allow a flexible variety of learning problems to be represented, it also provides the means for representing the goal of learning and opens the way for the automatic development of learning algorithms from specifications.

High-Efficiency Food Production in a Renewable Energy Based Micro-Grid Power System

NASA Technical Reports Server (NTRS)

Bubenheim, David; Meiners, Dennis

2016-01-01

Controlled Environment Agriculture (CEA) systems can be used to produce high-quality, desirable food year round, and the fresh produce can positively contribute to the health and well being of residents in communities with difficult supply logistics. While CEA has many positive outcomes for a remote community, the associated high electric demands have prohibited widespread implementation in what is typically already a fully subscribed power generation and distribution system. Recent advances in CEA technologies as well as renewable power generation, storage, and micro-grid management are increasing system efficiency and expanding the possibilities for enhancing community supporting infrastructure without increasing demands for outside supplied fuels. We will present examples of how new lighting, nutrient delivery, and energy management and control systems can enable significant increases in food production efficiency while maintaining high yields in CEA. Examples from Alaskan communities where initial incorporation of renewable power generation, energy storage and grid management techniques have already reduced diesel fuel consumption for electric generation by more than 40% and expanded grid capacity will be presented. We will discuss how renewable power generation, efficient grid management to extract maximum community service per kW, and novel energy storage approaches can expand the food production, water supply, waste treatment, sanitation and other community support services without traditional increases of consumable fuels supplied from outside the community. These capabilities offer communities with a range of choices to enhance their communities. The examples represent a synergy of technology advancement efforts to develop sustainable community support systems for future space-based human habitats and practical implementation of infrastructure components to increase efficiency and enhance health and well being in remote communities today and tomorrow.

High-Efficiency Food Production in a Renewable Energy Based Micro-Grid

NASA Technical Reports Server (NTRS)

Bubenheim, David L.

2017-01-01

Controlled Environment Agriculture (CEA) systems can be used to produce high-quality, desirable food year round, and the fresh produce can positively contribute to the health and well being of residents in communities with difficult supply logistics. While CEA has many positive outcomes for a remote community, the associated high electric demands have prohibited widespread implementation in what is typically already a fully subscribed power generation and distribution system. Recent advances in CEA technologies as well as renewable power generation, storage, and micro-grid management are increasing system efficiency and expanding the possibilities for enhancing community supporting infrastructure without increasing demands for outside supplied fuels. We will present examples of how new lighting, nutrient delivery, and energy management and control systems can enable significant increases in food production efficiency while maintaining high yields in CEA.Examples from Alaskan communities where initial incorporation of renewable power generation, energy storage and grid management techniques have already reduced diesel fuel consumption for electric generation by more than 40 and expanded grid capacity will be presented. We will discuss how renewable power generation, efficient grid management to extract maximum community service per kW, and novel energy storage approaches can expand the food production, water supply, waste treatment, sanitation and other community support services without traditional increases of consumable fuels supplied from outside the community. These capabilities offer communities with a range of choices to enhance their communities. The examples represent a synergy of technology advancement efforts to develop sustainable community support systems for future space-based human habitats and practical implementation of infrastructure components to increase efficiency and enhance health and well-being in remote communities today and tomorrow.

The Visible Cement Data Set

PubMed Central

Bentz, Dale P.; Mizell, Symoane; Satterfield, Steve; Devaney, Judith; George, William; Ketcham, Peter; Graham, James; Porterfield, James; Quenard, Daniel; Vallee, Franck; Sallee, Hebert; Boller, Elodie; Baruchel, Jose

2002-01-01

With advances in x-ray microtomography, it is now possible to obtain three-dimensional representations of a material’s microstructure with a voxel size of less than one micrometer. The Visible Cement Data Set represents a collection of 3-D data sets obtained using the European Synchrotron Radiation Facility in Grenoble, France in September 2000. Most of the images obtained are for hydrating portland cement pastes, with a few data sets representing hydrating Plaster of Paris and a common building brick. All of these data sets are being made available on the Visible Cement Data Set website at http://visiblecement.nist.gov. The website includes the raw 3-D datafiles, a description of the material imaged for each data set, example two-dimensional images and visualizations for each data set, and a collection of C language computer programs that will be of use in processing and analyzing the 3-D microstructural images. This paper provides the details of the experiments performed at the ESRF, the analysis procedures utilized in obtaining the data set files, and a few representative example images for each of the three materials investigated. PMID:27446723

The control of stoichiometry in Epitaxial semiconductor structures. Interfacial Chemistry: Property relations. A workshop review

NASA Technical Reports Server (NTRS)

Bachmann, Klaus J.

1995-01-01

A workshop on the control of stoichiometry in epitaxial semiconductor structures was held on August 21-26, 1995 in the hotel Stutenhaus at Vesser in Germany. The secluded location of the workshop in the forest of Thuringia and its informal style stimulated extensive private discussions among the participants and promoted new contacts between young scientists from Eastern and Western Europe and the USA. Topics addressed by the presentations were interactions of precursors to heteroepitaxy and doping with the substrate surface, the control of interfacial properties under the conditions of heteroepitaxy for selected materials systems, methods of characterization of interfaces and native point defects in semiconductor heterostructures and an in depth evaluation of the present status of the control and characterization of the point defect chemistry for one specific semiconductor (ZnGeP2), including studies of both heterostructures and bulk single crystals. The selected examples of presentations and comments given here represent individual choices - made by the author to highlight major points of the discussions.

Simplified one-pot synthesis of [.sup.18F]SFB for radiolabeling

DOEpatents

Olma, Sebastian; Shen, Clifton Kwang-Fu

2015-08-04

A non-aqueous single pot synthesis of [.sup.18F]SFB is set forth. The [.sup.18F]SFB produced with this method is then used, for example, to label a peptide or an engineered antibody fragment (diabody) targeting human epidermal growth factor receptor 2 (HER2) as representative examples of labeled compounds for use as an injectable composition to locate abnormal tissue, specifically tumors within an animal or human using a PET scan.

Simplified one-pot synthesis of [.sup.18F]SFB for radiolabeling

DOEpatents

Olma, Sebastian; Shen, Clifton Kwang-Fu

2013-07-16

A non-aqueous single pot synthesis of [.sup.18F]SFB is set forth. The [.sup.18F]SFB produced with this method is then used, for example, to label a peptide or an engineered antibody fragment (diabody) targeting human epidermal growth factor receptor 2 (HER2) as representative examples of labeled compounds for use as an injectable composition to locate abnormal tissue, specifically tumors within an animal or human using a PET scan.

Strategies Which Foster Broad Use and Deployment of Earth and Space Science Informal and Formal Education Resources

NASA Technical Reports Server (NTRS)

Meeson, Blanche W.; Gabrys, Robert; Ireton, M. Frank; Einaudi, Franco (Technical Monitor)

2001-01-01

Education projects supported by federal agencies and carried out by a wide range of organizations foster learning about Earth and Space systems science in a wide array of venues. Across these agencies a range of strategies are employed to ensure that effective materials are created for these diverse venues. And that these materials are deployed broadly so that a large spectrum of the American Public, both adults and children alike, can learn and become excited by the Earth and space system science. This session will highlight some of those strategies and will cover representative examples to illustrate the effectiveness of the strategies. Invited speakers from selected formal and informal educational efforts will anchor this session. Speakers with representative examples are encouraged to submit abstracts for the session to showcase the strategies which they use.

Using perceptual rules in interactive visualization

NASA Astrophysics Data System (ADS)

Rogowitz, Bernice E.; Treinish, Lloyd A.

1994-05-01

In visualization, data are represented as variations in grayscale, hue, shape, and texture. They can be mapped to lines, surfaces, and glyphs, and can be represented statically or in animation. In modem visualization systems, the choices for representing data seem unlimited. This is both a blessing and a curse, however, since the visual impression created by the visualization depends critically on which dimensions are selected for representing the data (Bertin, 1967; Tufte, 1983; Cleveland, 1991). In modem visualization systems, the user can interactively select many different mapping and representation operations, and can interactively select processing operations (e.g., applying a color map), realization operations (e.g., generating geometric structures such as contours or streamlines), and rendering operations (e.g., shading or ray-tracing). The user can, for example, map data to a color map, then apply contour lines, then shift the viewing angle, then change the color map again, etc. In many systems, the user can vary the choices for each operation, selecting, for example, particular color maps, contour characteristics, and shading techniques. The hope is that this process will eventually converge on a visual representation which expresses the structure of the data and effectively communicates its message in a way that meets the user's goals. Sometimes, however, it results in visual representations which are confusing, misleading, and garish.

Theory, computation, and application of exponential splines

NASA Technical Reports Server (NTRS)

Mccartin, B. J.

1981-01-01

A generalization of the semiclassical cubic spline known in the literature as the exponential spline is discussed. In actuality, the exponential spline represents a continuum of interpolants ranging from the cubic spline to the linear spline. A particular member of this family is uniquely specified by the choice of certain tension parameters. The theoretical underpinnings of the exponential spline are outlined. This development roughly parallels the existing theory for cubic splines. The primary extension lies in the ability of the exponential spline to preserve convexity and monotonicity present in the data. Next, the numerical computation of the exponential spline is discussed. A variety of numerical devices are employed to produce a stable and robust algorithm. An algorithm for the selection of tension parameters that will produce a shape preserving approximant is developed. A sequence of selected curve-fitting examples are presented which clearly demonstrate the advantages of exponential splines over cubic splines.

Judgement heuristics and bias in evidence interpretation: The effects of computer generated exhibits.

PubMed

Norris, Gareth

2015-01-01

The increasing use of multi-media applications, trial presentation software and computer generated exhibits (CGE) has raised questions as to the potential impact of the use of presentation technology on juror decision making. A significant amount of the commentary on the manner in which CGE exerts legal influence is largely anecdotal; empirical examinations too are often devoid of established theoretical rationalisations. This paper will examine a range of established judgement heuristics (for example, the attribution error, representativeness, simulation), in order to establish their appropriate application for comprehending legal decisions. Analysis of both past cases and empirical studies will highlight the potential for heuristics and biases to be restricted or confounded by the use of CGE. The paper will conclude with some wider discussion on admissibility, access to justice, and emerging issues in the use of multi-media in court. Copyright © 2015 Elsevier Ltd. All rights reserved.

Boosting with Averaged Weight Vectors

NASA Technical Reports Server (NTRS)

Oza, Nikunj C.; Clancy, Daniel (Technical Monitor)

2002-01-01

AdaBoost is a well-known ensemble learning algorithm that constructs its constituent or base models in sequence. A key step in AdaBoost is constructing a distribution over the training examples to create each base model. This distribution, represented as a vector, is constructed to be orthogonal to the vector of mistakes made by the previous base model in the sequence. The idea is to make the next base model's errors uncorrelated with those of the previous model. Some researchers have pointed out the intuition that it is probably better to construct a distribution that is orthogonal to the mistake vectors of all the previous base models, but that this is not always possible. We present an algorithm that attempts to come as close as possible to this goal in an efficient manner. We present experimental results demonstrating significant improvement over AdaBoost and the Totally Corrective boosting algorithm, which also attempts to satisfy this goal.

Applications of aerospace technology in industry. A technology transfer profile: Cryogenics

NASA Technical Reports Server (NTRS)

1971-01-01

Cryogenics is especially interesting when viewed from the perspective of technology transfer. Its recent rapid growth has been due to demands of both industry and aerospace. This environment provides an unusual opportunity to identify some of the forces active during a period of broad technological change and at the same time further the understanding of the technology transfer process. That process is specifically defined here as the ways in which technology, generated in NASA programs, contributes to technological change. In addition to presenting a brief overview of the cryogenics field and describing certain representative examples of the transfer of NASA-generated technology to the private sector, this presentation explores a singular relationship between NASA and another federal agency, the National Bureau of Standards. The relationship has operated both to generate and disseminate information fundamental to the broad growth of the cryogenics field.

Phytochemicals in Human Milk and Their Potential Antioxidative Protection

PubMed Central

2018-01-01

Diets contain secondary plant metabolites commonly referred to as phytochemicals. Many of them are believed to impact human health through various mechanisms, including protection against oxidative stress and inflammation, and decreased risks of developing chronic diseases. For mothers and other people, phytochemical intake occurs through the consumption of foods such as fruits, vegetables, and grains. Research has shown that some these phytochemicals are present in the mother’s milk and can contribute to its oxidative stability. For infants, human milk (HM) represents the primary and preferred source of nutrition because it is a complete food. Studies have reported that the benefit provided by HM goes beyond basic nutrition. It can, for example, reduce oxidative stress in infants, thereby reducing the risk of lung and intestinal diseases in infants. This paper summarizes the phytochemicals present in HM and their potential contribution to infant health. PMID:29470421

Method for estimating spatially variable seepage loss and hydraulic conductivity in intermittent and ephemeral streams

USGS Publications Warehouse

Niswonger, R.G.; Prudic, David E.; Fogg, G.E.; Stonestrom, David A.; Buckland, E.M.

2008-01-01

A method is presented for estimating seepage loss and streambed hydraulic conductivity along intermittent and ephemeral streams using streamflow front velocities in initially dry channels. The method uses the kinematic wave equation for routing streamflow in channels coupled to Philip's equation for infiltration. The coupled model considers variations in seepage loss both across and along the channel. Water redistribution in the unsaturated zone is also represented in the model. Sensitivity of the streamflow front velocity to parameters used for calculating seepage loss and for routing streamflow shows that the streambed hydraulic conductivity has the greatest sensitivity for moderate to large seepage loss rates. Channel roughness, geometry, and slope are most important for low seepage loss rates; however, streambed hydraulic conductivity is still important for values greater than 0.008 m/d. Two example applications are presented to demonstrate the utility of the method.

Optical methods for non-contact measurements of membranes

NASA Astrophysics Data System (ADS)

Roose, S.; Stockman, Y.; Rochus, P.; Kuhn, T.; Lang, M.; Baier, H.; Langlois, S.; Casarosa, G.

2009-11-01

Structures for space applications very often suffer stringent mass constraints. Lightweight structures are developed for this purpose, through the use of deployable and/or inflatable beams, and thin-film membranes. Their inherent properties (low mass and small thickness) preclude the use of conventional measurement methods (accelerometers and displacement transducers for example) during on-ground testing. In this context, innovative non-contact measurement methods need to be investigated for these stretched membranes. The object of the present project is to review existing measurement systems capable of measuring characteristics of membrane space-structures such as: dot-projection videogrammetry (static measurements), stereo-correlation (dynamic and static measurements), fringe projection (wrinkles) and 3D laser scanning vibrometry (dynamic measurements). Therefore, minimum requirements were given for the study in order to have representative test articles covering a wide range of applications. We present test results obtained with the different methods on our test articles.

Design guidelines for adapting scientific research articles: An example from an introductory level, interdisciplinary program on soft matter

NASA Astrophysics Data System (ADS)

Langbeheim, Elon; Safran, Samuel A.; Yerushalmi, Edit

2013-01-01

We present design guidelines for using Adapted Primary Literature (APL) as part of current interdisciplinary topics to introductory physics students. APL is a text genre that allows students to comprehend a scientific article, while maintaining the core features of the communication among scientists, thus representing an authentic scientific discourse. We describe the adaptation of a research paper by Nobel Laureate Paul Flory on phase equilibrium in polymer-solvent mixtures that was presented to high school students in a project-based unit on soft matter. The adaptation followed two design strategies: a) Making explicit the interplay between the theory and experiment. b) Re-structuring the text to map the theory onto the students' prior knowledge. Specifically, we map the theory of polymer-solvent systems onto a model for binary mixtures of small molecules of equal size that was already studied in class.

Relative motion of orbiting satellites

NASA Technical Reports Server (NTRS)

Eades, J. B., Jr.

1972-01-01

The relative motion problem is analyzed, as a linearized case, and as a numerically determined solution to provide a time history of the geometries representing the motion state. The displacement history and the hodographs for families of solutions are provided, analytically and graphically, to serve as an aid to understanding this problem area. Linearized solutions to relative motion problems of orbiting particles are presented for the impulsive and fixed thrust cases. Second order solutions are described to enhance the accuracy of prediction. A method was developed to obtain accurate, numerical solutions to the intercept and rendezvous problem; and, special situations are examined. A particular problem related to relative motions, where the motion traces develop a cusp, is examined in detail. This phenomenon is found to be dependent on a particular relationship between orbital eccentricity and the inclination between orbital planes. These conditions are determined, and, example situations are presented and discussed.

Teaching astronomy and astrophysics at the Valencian International University (VIU): Application and use of Virtual Observatory tools

NASA Astrophysics Data System (ADS)

Diago, P. D.; Gutiérrez-Soto, J.; Ruiz, J. E.; Solano, E.

2013-05-01

The Astronomy and Astrophysics Master, running at the Valencian International University (VIU, http://www.viu.es) since march 2010, is a clear example of how development of infor- mation and communication technologies (ICTs) and new e-learning methods are changing the traditional distance learning. In the context of the European Space for Higher Edu- cation (ESHE) we present how the Virtual Observatory (VO) tools can be an important part in the Astronomy and Astrophysics teaching. The described tasks has been carried out during the last three courses. These tasks are representative of the state of the art in Astrophysics research. We attach a description and a learning results list of each one of the presented tasks. The tasks can be downloaded at the Spanish VO website: http://svo.cab.inta-csic.es/docs/index.php?pagename=Education/VOcases

Recursivity in Lingua Cosmica

NASA Astrophysics Data System (ADS)

Ollongren, Alexander

2011-02-01

In a sequence of papers on the topic of message construction for interstellar communication by means of a cosmic language, the present author has discussed various significant requirements such a lingua should satisfy. The author's Lingua Cosmica is a (meta) system for annotating contents of possibly large-scale messages for ETI. LINCOS, based on formal constructive logic, was primarily designed for dealing with logic contents of messages but is also applicable for denoting structural properties of more general abstractions embedded in such messages. The present paper explains ways and means for achieving this for a special case: recursive entities. As usual two stages are involved: first the domain of discourse is enriched with suitable representations of the entities concerned, after which properties over them can be dealt with within the system itself. As a representative example the case of Russian dolls (Matrjoshka's) is discussed in some detail and relations with linguistic structures in natural languages are briefly exploited.

Method for calculating lift distributions for unswept wings with flaps or ailerons by use of nonlinear section lift data

NASA Technical Reports Server (NTRS)

Sivells, James C; Westrick, Gertrude C

1952-01-01

A method is presented which allows the use of nonlinear section lift data in the calculation of the spanwise lift distribution of unswept wings with flaps or ailerons. This method is based upon lifting line theory and is an extension to the method described in NACA rep. 865. The mathematical treatment of the discontinuity in absolute angle of attack at the end of the flap or aileron involves the use of a correction factor which accounts for the inability of a limited trigonometric series to represent adequately the spanwise lift distribution. A treatment of the apparent discontinuity in maximum section lift coefficient is also described. Simplified computing forms containing detailed examples are given for both symmetrical and asymmetrical lift distributions. A few comparisons of calculated characteristics with those obtained experimentally are also presented.

A new approach of data clustering using a flock of agents.

PubMed

Picarougne, Fabien; Azzag, Hanene; Venturini, Gilles; Guinot, Christiane

2007-01-01

This paper presents a new bio-inspired algorithm (FClust) that dynamically creates and visualizes groups of data. This algorithm uses the concepts of a flock of agents that move together in a complex manner with simple local rules. Each agent represents one data. The agents move together in a 2D environment with the aim of creating homogeneous groups of data. These groups are visualized in real time, and help the domain expert to understand the underlying structure of the data set, like for example a realistic number of classes, clusters of similar data, isolated data. We also present several extensions of this algorithm, which reduce its computational cost, and make use of a 3D display. This algorithm is then tested on artificial and real-world data, and a heuristic algorithm is used to evaluate the relevance of the obtained partitioning.

Invariant and partially-invariant solutions of the equations describing a non-stationary and isentropic flow for an ideal and compressible fluid in (3 + 1) dimensions

NASA Astrophysics Data System (ADS)

Grundland, A. M.; Lalague, L.

1996-04-01

This paper presents a new method of constructing, certain classes of solutions of a system of partial differential equations (PDEs) describing the non-stationary and isentropic flow for an ideal compressible fluid. A generalization of the symmetry reduction method to the case of partially-invariant solutions (PISs) has been formulated. We present a new algorithm for constructing PISs and discuss in detail the necessary conditions for the existence of non-reducible PISs. All these solutions have the defect structure 0305-4470/29/8/019/img1 and are computed from four-dimensional symmetric subalgebras. These theoretical considerations are illustrated by several examples. Finally, some new classes of invariant solutions obtained by the symmetry reduction method are included. These solutions represent central, conical, rational, spherical, cylindrical and non-scattering double waves.

A bridge role metric model for nodes in software networks.

PubMed

Li, Bo; Feng, Yanli; Ge, Shiyu; Li, Dashe

2014-01-01

A bridge role metric model is put forward in this paper. Compared with previous metric models, our solution of a large-scale object-oriented software system as a complex network is inherently more realistic. To acquire nodes and links in an undirected network, a new model that presents the crucial connectivity of a module or the hub instead of only centrality as in previous metric models is presented. Two previous metric models are described for comparison. In addition, it is obvious that the fitting curve between the Bre results and degrees can well be fitted by a power law. The model represents many realistic characteristics of actual software structures, and a hydropower simulation system is taken as an example. This paper makes additional contributions to an accurate understanding of module design of software systems and is expected to be beneficial to software engineering practices.