The impact of exposure to films of natural and built environments on state body appreciation.

PubMed

Swami, Viren; Pickering, Mark; Barron, David; Patel, Shreepali

2018-06-12

Previous work has shown that exposure to images of nature results in elevated state body appreciation, but static images may lack ecological validity. Here, we examined the impact of exposure to short films of simulated, first-person walks in natural or built environments. Thirty-six university students completed a measure of state body appreciation before and after watching films of either a walk in a natural or a built environment created specifically for the present study. Two weeks later, they completed the same task but watched the other film type. Results indicated that exposure to the film of a natural environment resulted in significantly elevated state body appreciation (d = 0.66). There was no significant change in state body appreciation following exposure to the film of the built environment (d = 0.14). These findings suggest that exposure to films depicting the natural environment may promote immediate, moderate-sized improvements in state body image. Copyright © 2018 Elsevier Ltd. All rights reserved.

Wind Turbines in the Built Environment: Summary of a Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tinnesand, Heidi; Baring-Gould, Ian; Fields, Jason

2016-09-28

Built-environment wind turbine (BEWT) projects are wind energy projects that are constructed on, in, or near buildings. These projects present an opportunity for distributed, low-carbon generation combined with highly visible statements on sustainability, but the BEWT niche of the wind industry is still developing and is relatively less mature than the utility-scale wind or conventional ground-based distributed wind sectors. The findings presented in this presentation cannot be extended to wind energy deployments in general because of the large difference in application and technology maturity. This presentation summarizes the results of a report investigating the current state of the BEWT industrymore » by reviewing available literature on BEWT projects as well as interviewing project owners on their experiences deploying and operating the technology. The authors generated a series of case studies that outlines the pertinent project details, project outcomes, and lessons learned.« less

Static analysis of masonry kilns built with fictile tubules bricks

NASA Astrophysics Data System (ADS)

Olivito, Renato S.; Scuro, Carmelo; Codispoti, Rosamaria

2016-12-01

Industrial archeology is a branch that studies all the testimony (tangible and intangible, direct and indirect) related to the process of industrialization since its origins. This technical field is based on an interdisciplinary approach, it has the task of deepening the story, understanding the technological development made by man over the centuries. The present work focused attention on the study and analysis of a masonry kiln, built with the technique of hollow clay fictile tubules. The study, in particular, has been carried out analyzing the stress state caused by the wind on the structure. The kiln is constituted by a particular geometric configuration that develops in height due to the presence of chimney over the dome.

Fireball multi object spectrograph: as-built optic performances

NASA Astrophysics Data System (ADS)

Grange, R.; Milliard, B.; Lemaitre, G.; Quiret, S.; Pascal, S.; Origné, A.; Hamden, E.; Schiminovich, D.

2016-07-01

Fireball (Faint Intergalactic Redshifted Emission Balloon) is a NASA/CNES balloon-borne experiment to study the faint diffuse circumgalactic medium from the line emissions in the ultraviolet (200 nm) above 37 km flight altitude. Fireball relies on a Multi Object Spectrograph (MOS) that takes full advantage of the new high QE, low noise 13 μm pixels UV EMCCD. The MOS is fed by a 1 meter diameter parabola with an extended field (1000 arcmin2) using a highly aspherized two mirror corrector. All the optical train is working at F/2.5 to maintain a high signal to noise ratio. The spectrograph (R 2200 and 1.5 arcsec FWHM) is based on two identical Schmidt systems acting as collimator and camera sharing a 2400 g/mm aspherized reflective Schmidt grating. This grating is manufactured from active optics methods by double replication technique of a metal deformable matrix whose active clear aperture is built-in to a rigid elliptical contour. The payload and gondola are presently under integration at LAM. We will present the alignment procedure and the as-built optic performances of the Fireball instrument.

Experimental study of turbulence in blade end wall corner region

NASA Technical Reports Server (NTRS)

Raj, R.

1982-01-01

Corner flows and wall pressure fluctuations, design and fabrication of the test model, preliminary resuls on boundary layer, flow visualization, turbulence intensity and spectra measurements are presented. The design consideration and fabrication report on the newly built wind tunnel to be used for subsequent continuation of the research effort is also presented.

Intersection of neighborhood dynamics and socioeconomic status in small-area walkability: the Heart Healthy Hoods project.

PubMed

Gullón, Pedro; Bilal, Usama; Cebrecos, Alba; Badland, Hannah M; Galán, Iñaki; Franco, Manuel

2017-06-06

Previous studies found a complex relationship between area-level socioeconomic status (SES) and walkability. These studies did not include neighborhood dynamics. Our aim was to study the association between area-level SES and walkability in the city of Madrid (Spain) evaluating the potential effect modification of neighborhood dynamics. All census sections of the city of Madrid (n = 2415) were included. Area-level SES was measured using a composite index of 7 indicators in 4 domains (education, wealth, occupation and living conditions). Two neighborhood dynamics factors were computed: gentrification, proxied by change in education levels in the previous 10 years, and neighborhood age, proxied by median year of construction of housing units in the area. Walkability was measured using a composite index of 4 indicators (Residential Density, Population Density, Retail Destinations and Street Connectivity). We modeled the association using linear mixed models with random intercepts. Area-level SES and walkability were inversely and significantly associated. Areas with lower SES showed the highest walkability. This pattern did not hold for areas with an increase in education level, where the association was flat (no decrease in walkability with higher SES). Moreover, the association was attenuated in newly built areas: the association was stronger in areas built before 1975, weaker in areas built between 1975 and 1990 and flat in areas built from 1990 on. Areas with higher neighborhood socioeconomic status had lower walkability in Madrid. This disadvantage in walkability was not present in recently built or gentrified areas.

Comparative study of age estimation using dentinal translucency by digital and conventional methods.

PubMed

Bommannavar, Sushma; Kulkarni, Meena

2015-01-01

Estimating age using the dentition plays a significant role in identification of the individual in forensic cases. Teeth are one of the most durable and strongest structures in the human body. The morphology and arrangement of teeth vary from person-to-person and is unique to an individual as are the fingerprints. Therefore, the use of dentition is the method of choice in the identification of the unknown. Root dentin translucency is considered to be one of the best parameters for dental age estimation. Traditionally, root dentin translucency was measured using calipers. Recently, the use of custom built software programs have been proposed for the same. The present study describes a method to measure root dentin translucency on sectioned teeth using a custom built software program Adobe Photoshop 7.0 version (Adobe system Inc, Mountain View California). A total of 50 single rooted teeth were sectioned longitudinally to derive a 0.25 mm uniform thickness and the root dentin translucency was measured using digital and caliper methods and compared. The Gustafson's morphohistologic approach is used in this study. Correlation coefficients of translucency measurements to age were statistically significant for both the methods (P < 0.125) and linear regression equations derived from both methods revealed better ability of the digital method to assess age. The custom built software program used in the present study is commercially available and widely used image editing software. Furthermore, this method is easy to use and less time consuming. The measurements obtained using this method are more precise and thus help in more accurate age estimation. Considering these benefits, the present study recommends the use of digital method to assess translucency for age estimation.

Comparative study of age estimation using dentinal translucency by digital and conventional methods

PubMed Central

Bommannavar, Sushma; Kulkarni, Meena

2015-01-01

Introduction: Estimating age using the dentition plays a significant role in identification of the individual in forensic cases. Teeth are one of the most durable and strongest structures in the human body. The morphology and arrangement of teeth vary from person-to-person and is unique to an individual as are the fingerprints. Therefore, the use of dentition is the method of choice in the identification of the unknown. Root dentin translucency is considered to be one of the best parameters for dental age estimation. Traditionally, root dentin translucency was measured using calipers. Recently, the use of custom built software programs have been proposed for the same. Objectives: The present study describes a method to measure root dentin translucency on sectioned teeth using a custom built software program Adobe Photoshop 7.0 version (Adobe system Inc, Mountain View California). Materials and Methods: A total of 50 single rooted teeth were sectioned longitudinally to derive a 0.25 mm uniform thickness and the root dentin translucency was measured using digital and caliper methods and compared. The Gustafson's morphohistologic approach is used in this study. Results: Correlation coefficients of translucency measurements to age were statistically significant for both the methods (P < 0.125) and linear regression equations derived from both methods revealed better ability of the digital method to assess age. Conclusion: The custom built software program used in the present study is commercially available and widely used image editing software. Furthermore, this method is easy to use and less time consuming. The measurements obtained using this method are more precise and thus help in more accurate age estimation. Considering these benefits, the present study recommends the use of digital method to assess translucency for age estimation. PMID:25709325

Transmission of Airborne Bacteria across Built Environments and Its Measurement Standards: A Review.

PubMed

Fujiyoshi, So; Tanaka, Daisuke; Maruyama, Fumito

2017-01-01

Human health is influenced by various factors including microorganisms present in built environments where people spend most of their lives (approximately 90%). It is therefore necessary to monitor and control indoor airborne microbes for occupational safety and public health. Most studies concerning airborne microorganisms have focused on fungi, with scant data available concerning bacteria. The present review considers papers published from 2010 to 2017 approximately and factors affecting properties of indoor airborne bacteria (communities and concentration) with respect to temporal perspective and to multiscale interaction viewpoint. From a temporal perspective, bacterial concentrations in built environments change depending on numbers of human occupancy, while properties of bacterial communities tend to remain stable. Similarly, the bacteria found in social and community spaces such as offices, classrooms and hospitals are mainly associated with human occupancy. Other major sources of indoor airborne bacteria are (i) outdoor environments, and (ii) the building materials themselves. Indoor bacterial communities and concentrations are varied with varying interferences by outdoor environment. Airborne bacteria from the outdoor environment enter an indoor space through open doors and windows, while indoor bacteria are simultaneously released to the outer environment. Outdoor bacterial communities and their concentrations are also affected by geographical factors such as types of land use and their spatial distribution. The bacteria found in built environments therefore originate from any of the natural and man-made surroundings around humans. Therefore, to better understand the factors influencing bacterial concentrations and communities in built environments, we should study all the environments that humans contact as a single ecosystem. In this review, we propose the establishment of a standard procedure for assessing properties of indoor airborne bacteria using four factors: temperature, relative humidity (RH), air exchange rate, and occupant density, as a minimum requirement. We also summarize the relevant legislation by country. Choice of factors to measure remain controversial are discussed.

Transmission of Airborne Bacteria across Built Environments and Its Measurement Standards: A Review

PubMed Central

Fujiyoshi, So; Tanaka, Daisuke; Maruyama, Fumito

2017-01-01

Human health is influenced by various factors including microorganisms present in built environments where people spend most of their lives (approximately 90%). It is therefore necessary to monitor and control indoor airborne microbes for occupational safety and public health. Most studies concerning airborne microorganisms have focused on fungi, with scant data available concerning bacteria. The present review considers papers published from 2010 to 2017 approximately and factors affecting properties of indoor airborne bacteria (communities and concentration) with respect to temporal perspective and to multiscale interaction viewpoint. From a temporal perspective, bacterial concentrations in built environments change depending on numbers of human occupancy, while properties of bacterial communities tend to remain stable. Similarly, the bacteria found in social and community spaces such as offices, classrooms and hospitals are mainly associated with human occupancy. Other major sources of indoor airborne bacteria are (i) outdoor environments, and (ii) the building materials themselves. Indoor bacterial communities and concentrations are varied with varying interferences by outdoor environment. Airborne bacteria from the outdoor environment enter an indoor space through open doors and windows, while indoor bacteria are simultaneously released to the outer environment. Outdoor bacterial communities and their concentrations are also affected by geographical factors such as types of land use and their spatial distribution. The bacteria found in built environments therefore originate from any of the natural and man-made surroundings around humans. Therefore, to better understand the factors influencing bacterial concentrations and communities in built environments, we should study all the environments that humans contact as a single ecosystem. In this review, we propose the establishment of a standard procedure for assessing properties of indoor airborne bacteria using four factors: temperature, relative humidity (RH), air exchange rate, and occupant density, as a minimum requirement. We also summarize the relevant legislation by country. Choice of factors to measure remain controversial are discussed. PMID:29238327

The spatial clustering of obesity: does the built environment matter?

PubMed

Huang, R; Moudon, A V; Cook, A J; Drewnowski, A

2015-12-01

Obesity rates in the USA show distinct geographical patterns. The present study used spatial cluster detection methods and individual-level data to locate obesity clusters and to analyse them in relation to the neighbourhood built environment. The 2008-2009 Seattle Obesity Study provided data on the self-reported height, weight, and sociodemographic characteristics of 1602 King County adults. Home addresses were geocoded. Clusters of high or low body mass index were identified using Anselin's Local Moran's I and a spatial scan statistic with regression models that searched for unmeasured neighbourhood-level factors from residuals, adjusting for measured individual-level covariates. Spatially continuous values of objectively measured features of the local neighbourhood built environment (SmartMaps) were constructed for seven variables obtained from tax rolls and commercial databases. Both the Local Moran's I and a spatial scan statistic identified similar spatial concentrations of obesity. High and low obesity clusters were attenuated after adjusting for age, gender, race, education and income, and they disappeared once neighbourhood residential property values and residential density were included in the model. Using individual-level data to detect obesity clusters with two cluster detection methods, the present study showed that the spatial concentration of obesity was wholly explained by neighbourhood composition and socioeconomic characteristics. These characteristics may serve to more precisely locate obesity prevention and intervention programmes. © 2014 The British Dietetic Association Ltd.

Newly Built Undergraduate Schools Should Place Great Emphasis on Connotation Construction and Quality Promotion: An Analysis Based on the Qualification Evaluation Results for 41 Undergraduate Schools

ERIC Educational Resources Information Center

Binglin, Zhong

2016-01-01

The article presents a quantitative analysis of the evaluation results for 41 newly built undergraduate schools that submitted to the qualification evaluation of undergraduate work by Ministry of Education in 2013. It shows that newly built undergraduate schools should place great emphasis on connotation construction and quality promotion and on…

The Dynamics of Population, Built-up Areas and their Evolving Associations in Gridded Population across Time and Space

NASA Astrophysics Data System (ADS)

Stevens, F. R.; Gaughan, A. E.; Tatem, A. J.; Linard, C.; Sorichetta, A.; Nieves, J. J.; Reed, P.

2017-12-01

Gridded population data is commonly used to understand the `now' of hazard risk and mitigation management, health and disease modelling, and global change-, economic-, environmental-, and sustainability-related research. But to understand how human population change at local to global scales influences and is influenced by environmental changes requires novel ways of treating data and statistically describing associations of measured population counts with associated covariates. One of the most critical components in such gridded estimates is the relationship between built-up areas and population located in these areas. This relationship is rarely static and accurately estimating changes in built-areas through time and the changing human population around them is critical when applying gridded population datasets in studies of other environmental change. The research presented here discusses these issues in the context of multitemporal, gridded population data, using new technologies and sources of remotely-sensed and modeled built-up areas. We discuss applications of these data in environmental analyses and intercomparisons with other such data across scales.

Influence of strain relaxation in axial [Formula: see text] nanowire heterostructures on their electronic properties.

PubMed

Marquardt, Oliver; Krause, Thilo; Kaganer, Vladimir; Martín-Sánchez, Javier; Hanke, Michael; Brandt, Oliver

2017-05-26

We present a systematic theoretical study of the influence of elastic strain relaxation on the built-in electrostatic potentials and the electronic properties of axial [Formula: see text] nanowire (NW) heterostructures. Our simulations reveal that for a sufficiently large ratio between the thickness of the [Formula: see text] disk and the diameter of the NW, the elastic relaxation leads to a significant reduction of the built-in electrostatic potential in comparison to a planar system of similar layer thickness and In content. In this case, the ground state transition energies approach constant values with increasing thickness of the disk and only depend on the In content, a behavior usually associated to that of a quantum well free of built-in electrostatic potentials. We show that the structures under consideration are by no means field-free, and the built-in potentials continue to play an important role even for ultrathin NWs. In particular, strain and the resulting polarization potentials induce complex confinement features of electrons and holes, which depend on the In content, shape, and dimensions of the heterostructure.

Design of a New Built-in UHF Multi-Frequency Antenna Sensor for Partial Discharge Detection in High-Voltage Switchgears.

PubMed

Zhang, Xiaoxing; Cheng, Zheng; Gui, Yingang

2016-07-26

In this study a new built-in ultrahigh frequency (UHF) antenna sensor was designed and applied in a high-voltage switchgear for partial discharge (PD) detection. The casing of the switchgear was initially used as the ground plane of the antenna sensor, which integrated the sensor into the high-voltage switchgear. The Koch snowflake patch was adopted as the radiation patch of the antenna to overcome the disadvantages of common microstrip antennas, and the feed position and the dielectric layer thickness were simulated in detail. Simulation results show that the antenna sensor possessed four resonant points with good impedance matching from 300 MHz to 1000 MHz, and it also presented good multi-frequency performance in the entire working frequency band. PD detection experiments were conducted in the high-voltage switchgear, and the fabricated antenna sensor was effectively built into the high-voltage switchgear. In order to reflect the advantages of the built-in antenna sensor, another external UHF antenna sensor was used as a comparison to simultaneously detect PD. Experimental results demonstrated that the built-in antenna sensor possessed high detection sensitivity and strong anti-interference capacity, which ensured the practicability of the design. In addition, it had more high-voltage switchgear PD detection advantages than the external sensor.

Design of a New Built-in UHF Multi-Frequency Antenna Sensor for Partial Discharge Detection in High-Voltage Switchgears

PubMed Central

Zhang, Xiaoxing; Cheng, Zheng; Gui, Yingang

2016-01-01

In this study a new built-in ultrahigh frequency (UHF) antenna sensor was designed and applied in a high-voltage switchgear for partial discharge (PD) detection. The casing of the switchgear was initially used as the ground plane of the antenna sensor, which integrated the sensor into the high-voltage switchgear. The Koch snowflake patch was adopted as the radiation patch of the antenna to overcome the disadvantages of common microstrip antennas, and the feed position and the dielectric layer thickness were simulated in detail. Simulation results show that the antenna sensor possessed four resonant points with good impedance matching from 300 MHz to 1000 MHz, and it also presented good multi-frequency performance in the entire working frequency band. PD detection experiments were conducted in the high-voltage switchgear, and the fabricated antenna sensor was effectively built into the high-voltage switchgear. In order to reflect the advantages of the built-in antenna sensor, another external UHF antenna sensor was used as a comparison to simultaneously detect PD. Experimental results demonstrated that the built-in antenna sensor possessed high detection sensitivity and strong anti-interference capacity, which ensured the practicability of the design. In addition, it had more high-voltage switchgear PD detection advantages than the external sensor. PMID:27472331

Evaluation of railroad cab car end beam designs.

DOT National Transportation Integrated Search

2003-06-01

This report presents the results of an experimental study to establish the strength and energy absorption capability of railroad cab car corner structures built to current requirements and for structures modified to carry higher loads and absorb more...

Information Searching Behaviour of Young Slovenian Researchers

ERIC Educational Resources Information Center

Vilar, Polona; Zumer, Maja

2011-01-01

Purpose: The purpose of this paper is to present the findings of an empirical study of information behaviour of young Slovenian researchers. Design/methodology/approach: Built on some well-known models of scholarly information behaviour the study complements a previously conducted study of the same population, which focused on the aspects of user…

Integrative approaches to investigating human-natural systems: the Baltimore ecosystem study

Treesearch

Mary L. Cadenasso; Steward T.A. Pickett; Morgan J. Grove; Morgan J. Grove

2006-01-01

This paper presents an overview of the research approaches used to study metropolitan Baltimore (Maryland, USA) as an ecological system. The urban ecosystem is a complex of biophysical, social, and built components, and is studied by an interdisciplinary teamof biological, social, and physical scientists, and urban designers. Ecology ?of? themetropolis is addressed...

A novel tool for assessing and summarizing the built environment

PubMed Central

2012-01-01

Background A growing corpus of research focuses on assessing the quality of the local built environment and also examining the relationship between the built environment and health outcomes and indicators in communities. However, there is a lack of research presenting a highly resolved, systematic, and comprehensive spatial approach to assessing the built environment over a large geographic extent. In this paper, we contribute to the built environment literature by describing a tool used to assess the residential built environment at the tax parcel-level, as well as a methodology for summarizing the data into meaningful indices for linkages with health data. Methods A database containing residential built environment variables was constructed using the existing body of literature, as well as input from local community partners. During the summer of 2008, a team of trained assessors conducted an on-foot, curb-side assessment of approximately 17,000 tax parcels in Durham, North Carolina, evaluating the built environment on over 80 variables using handheld Global Positioning System (GPS) devices. The exercise was repeated again in the summer of 2011 over a larger geographic area that included roughly 30,700 tax parcels; summary data presented here are from the 2008 assessment. Results Built environment data were combined with Durham crime data and tax assessor data in order to construct seven built environment indices. These indices were aggregated to US Census blocks, as well as to primary adjacency communities (PACs) and secondary adjacency communities (SACs) which better described the larger neighborhood context experienced by local residents. Results were disseminated to community members, public health professionals, and government officials. Conclusions The assessment tool described is both easily-replicable and comprehensive in design. Furthermore, our construction of PACs and SACs introduces a novel concept to approximate varying scales of community and describe the built environment at those scales. Our collaboration with community partners at all stages of the tool development, data collection, and dissemination of results provides a model for engaging the community in an active research program. PMID:23075269

Shivers Junior/Senior High School: Aberdeen School District in Mississippi. Case Study in Sustainable Design.

ERIC Educational Resources Information Center

Zimmerman, David

Design information, floor plan, photos, and energy use data are presented of a combined 45,000 square foot junior/senior high school in Mississippi's Aberdeen School District, built in 1956, and retrofitted over time to improve its usability. Exterior and interior photos are presented showing classrooms, the cafeteria, and gymnasium. Data are…

Changes in the built environment and changes in the amount of walking over time: longitudinal results from the multi-ethnic study of atherosclerosis.

PubMed

Hirsch, Jana A; Moore, Kari A; Clarke, Philippa J; Rodriguez, Daniel A; Evenson, Kelly R; Brines, Shannon J; Zagorski, Melissa A; Diez Roux, Ana V

2014-10-15

Lack of longitudinal research hinders causal inference on the association between the built environment and walking. In the present study, we used data from 6,027 adults in the Multi-Ethnic Study of Atherosclerosis who were 45-84 years of age at baseline to investigate the association of neighborhood built environment with trends in the amount of walking between 2000 and 2012. Walking for transportation and walking for leisure were assessed at baseline and at 3 follow-up visits (median follow-up = 9.15 years). Time-varying built environment measures (measures of population density, land use, number of destinations, bus access, and street connectivity) were created using geographic information systems. We used linear mixed models to estimate the associations between baseline levels of and a change in each built environment feature and a change in the frequency of walking. After adjustment for potential confounders, we found that higher baseline levels of population density, area zoned for retail, social destinations, walking destinations, and street connectivity were associated with greater increases in walking for transportation over time. Higher baseline levels of land zoned for residential use and distance to buses were associated with less pronounced increases (or decreases) in walking for transportation over time. Increases in the number of social destinations, the number of walking destinations, and street connectivity over time were associated with greater increases in walking for transportation. Higher baseline levels of both land zoned for retail and walking destinations were associated with greater increases in leisure walking, but no changes in built environment features were associated with leisure walking. The creation of mixed-use, dense developments may encourage adults to incorporate walking for transportation into their everyday lives. © The Author 2014. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

The process of aging: A case study approach implementing an ergonomics evaluation of the built environment for the elderly in Brazil.

PubMed

Paiva, Marie; Ferrer, Nicole; Villarouco, Vilma

2015-01-01

The phenomenon of aging is increasing worldwide. Various problems accompany it since aging makes the elderly undergo a decline in their natural functions. As such, senility can present itself as a barrier for everyday activities. This article presents a research that deals with the study of collective residences for the elderly. It seeks to identify configurations of these homes by seeking shortcomings and/or successful solutions. The Ergonomic Methodology for the Built Environment was applied. The method of the approach is qualitative and consists of multi-case study. Through the methodological approach, conflicts in the environment created by missing or inadequate elements were identified. Also, the opinions and suggestions from the elderly were analyzed, which shows their perception of the environment in use. The situations detected in this study indicate the occurrence of problems, exacerbated by the multiple deficiencies found in the user population of the environments analyzed. Thus it highlights the importance of there being future studies that are better targeted on designing environments for the elderly.

The microbiome of the built environment and mental health.

PubMed

Hoisington, Andrew J; Brenner, Lisa A; Kinney, Kerry A; Postolache, Teodor T; Lowry, Christopher A

2015-12-17

The microbiome of the built environment (MoBE) is a relatively new area of study. While some knowledge has been gained regarding impacts of the MoBE on the human microbiome and disease vulnerability, there is little knowledge of the impacts of the MoBE on mental health. Depending on the specific microbial species involved, the transfer of microorganisms from the built environment to occupant's cutaneous or mucosal membranes has the potential to increase or disrupt immunoregulation and/or exaggerate or suppress inflammation. Preclinical evidence highlighting the influence of the microbiota on systemic inflammation supports the assertion that microorganisms, including those originating from the built environment, have the potential to either increase or decrease the risk of inflammation-induced psychiatric conditions and their symptom severity. With advanced understanding of both the ecology of the built environment, and its influence on the human microbiome, it may be possible to develop bioinformed strategies for management of the built environment to promote mental health. Here we present a brief summary of microbiome research in both areas and highlight two interdependencies including the following: (1) effects of the MoBE on the human microbiome and (2) potential opportunities for manipulation of the MoBE in order to improve mental health. In addition, we propose future research directions including strategies for assessment of changes in the microbiome of common areas of built environments shared by multiple human occupants, and associated cohort-level changes in the mental health of those who spend time in the buildings. Overall, our understanding of the fields of both the MoBE and influence of host-associated microorganisms on mental health are advancing at a rapid pace and, if linked, could offer considerable benefit to health and wellness.

Cubic Unit Cell Construction Kit.

ERIC Educational Resources Information Center

Mattson, Bruce

2000-01-01

Presents instructions for building a simple interactive unit-cell construction kit that allows for the construction of simple, body-centered, and face-centered cubic lattices. The lit is built from inexpensive and readily available materials and can be built in any number of sizes. (WRM)

Static and Vibration Analyses of General Wing Structures Using Equivalent Plate Models

NASA Technical Reports Server (NTRS)

Kapania, Rakesh K.; Liu, Youhua

1999-01-01

An efficient method, using equivalent plate model, is developed for studying the static and vibration analyses of general built-up wing structures composed of skins, spars, and ribs. The model includes the transverse shear effects by treating the built-up wing as a plate following the Reissner-Mindlin theory, the so-called First-order Shear Deformation Theory (FSDT). The Ritz method is used with the Legendre polynomials being employed as the trial functions. This is in contrast to previous equivalent plate model methods which have used simple polynomials, known to be prone to numerical ill-conditioning, as the trial functions. The present developments are evaluated by comparing the results with those obtained using MSC/NASTRAN, for a set of examples. These examples are: (i) free-vibration analysis of a clamped trapezoidal plate with (a) uniform thickness, and (b) non-uniform thickness varying as an airfoil, (ii) free-vibration and static analyses (including skin stress distribution) of a general built-up wing, and (iii) free-vibration and static analyses of a swept-back box wing. The results obtained by the present equivalent plate model are in good agreement with those obtained by the finite element method.

Commonsense Geography.

ERIC Educational Resources Information Center

McHoul, Alec

1990-01-01

Presents an ethnomethodological study of how Australian high school geography teachers and students rely on common sense knowledge and reasoning to facilitate learning. Analyzes portions of transcripts from a class activity in which students built a scale model of a city. Explains location categorization devices, illustrating how learning involves…

User Engagement with Digital Archives for Research and Teaching: A Case Study of "Emblematica Online"

ERIC Educational Resources Information Center

Green, Harriett E.; Lamprin, Patricia

2017-01-01

Researchers increasingly engage with the digital archives built by libraries, archives, and museums, but many institutions still seek to learn more about researchers' needs and practices with these digital collections. This paper presents a user assessment study for "Emblematica Online," a research digital library that provides digitized…

Work Related Attitudes of Naval Officers before and after Retirement

ERIC Educational Resources Information Center

Shultz, Kenneth S.; Taylor, Mary Anne; Morrison, Robert F.

2003-01-01

Prospective expectations for retirement and retrospective accounts of past work experiences are typically used in cross-sectional empirical studies of retirement. Unfortunately, little is known about the accuracy of such accounts. Therefore, in the present longitudinal study, we built on the work of Beehr and Nielson (1995) by examining the…

HPG operating experience at CEM-UT

NASA Astrophysics Data System (ADS)

Gully, J. H.; Aanstoos, T. A.; Nalty, K.; Walls, W. A.

1986-11-01

Design and functional features are presented for three homopolar generators (HPG) used in experiments during the last decade at the Center for Electromechanics at the University of Texas. The first, a disk-type, 10 MJ HPG, was built in 1973 as a prototype power source for fusion experiments. A second, compact HPG was built in 1980 for opening switch experiments as part of railgun research. The third device is an iron-core, full-scale, high speed bearing and brush test facility for supplying an energy density of 60 MJ/cu m. Engineering data obtained during studies of armature reactions actively cooled brushes morganite-copper graphite rim brushes, and peak currents, are summarized.

Evaluating the influence of ivy canopy cover on brickwork: A case study from Warnham, West Sussex, UK

NASA Astrophysics Data System (ADS)

Coombes, Martin; Viles, Heather

2014-05-01

Biogeomorphological understanding is becoming increasingly applied in a range of environmental management contexts. The concept of 'bioprotection' is of particular relevance in the built environment. Here, the influence of higher plants on the condition of buildings and building materials, particularly vulnerable historic structures, is of great interest for conservationists and managing authorities tasked with preserving built cultural heritage. Ivy (Hedera spp.) is a widespread and prolific creeping and climbing plant that is commonly found on built structures. Opinion varies as to whether ivy is good or bad for buildings, but there is evidence to suggest it can have both protective and deteriorative influences. Here we present a case study assessment of ivy removal from a brick and mortar wall (c.100 years old) in West Sussex, UK. Using measurements of hardness (Equotip L), moisture (protimeter %WME) and visual inspection we find that the condition of brickwork varied with ivy canopy cover extent, but that this effect was not consistent between different heights on the wall. The roles of ivy in moderating wall moisture dynamics is discussed as a possible contributing factor.

Development of a novel imaging informatics-based system with an intelligent workflow engine (IWEIS) to support imaging-based clinical trials

PubMed Central

Wang, Ximing; Liu, Brent J; Martinez, Clarisa; Zhang, Xuejun; Winstein, Carolee J

2015-01-01

Imaging based clinical trials can benefit from a solution to efficiently collect, analyze, and distribute multimedia data at various stages within the workflow. Currently, the data management needs of these trials are typically addressed with custom-built systems. However, software development of the custom- built systems for versatile workflows can be resource-consuming. To address these challenges, we present a system with a workflow engine for imaging based clinical trials. The system enables a project coordinator to build a data collection and management system specifically related to study protocol workflow without programming. Web Access to DICOM Objects (WADO) module with novel features is integrated to further facilitate imaging related study. The system was initially evaluated by an imaging based rehabilitation clinical trial. The evaluation shows that the cost of the development of system can be much reduced compared to the custom-built system. By providing a solution to customize a system and automate the workflow, the system will save on development time and reduce errors especially for imaging clinical trials. PMID:25870169

Influence of strain relaxation in axial {{In}}_{x}{{Ga}}_{1-x}{\\rm{N}}/{GaN} nanowire heterostructures on their electronic properties

NASA Astrophysics Data System (ADS)

Marquardt, Oliver; Krause, Thilo; Kaganer, Vladimir; Martín-Sánchez, Javier; Hanke, Michael; Brandt, Oliver

2017-05-01

We present a systematic theoretical study of the influence of elastic strain relaxation on the built-in electrostatic potentials and the electronic properties of axial {{In}}x{{Ga}}1-x{{N}}/{GaN} nanowire (NW) heterostructures. Our simulations reveal that for a sufficiently large ratio between the thickness of the {{In}}x{{Ga}}1-x{{N}} disk and the diameter of the NW, the elastic relaxation leads to a significant reduction of the built-in electrostatic potential in comparison to a planar system of similar layer thickness and In content. In this case, the ground state transition energies approach constant values with increasing thickness of the disk and only depend on the In content, a behavior usually associated to that of a quantum well free of built-in electrostatic potentials. We show that the structures under consideration are by no means field-free, and the built-in potentials continue to play an important role even for ultrathin NWs. In particular, strain and the resulting polarization potentials induce complex confinement features of electrons and holes, which depend on the In content, shape, and dimensions of the heterostructure.

Static and dynamic crush testing and analysis of a rail vehicle corner structural element

DOT National Transportation Integrated Search

1999-11-01

This paper presents the results of an experimental study to establish the strength and energy absorption capability of cab car rail vehicle corner structures built to current strength requirements and for structures modified to carry higher loads and...

Parental perceived built environment measures and active play in Washington DC metropolitan children.

PubMed

Roberts, Jennifer D; Knight, Brandon; Ray, Rashawn; Saelens, Brian E

2016-06-01

Previous research identified associations between perceived built environment and adult physical activity; however, fewer studies have explored associations in children. The Built Environment and Active Play (BEAP) Study examined relationships between children's active play and parental perceptions of home neighborhood built environments within the Washington, DC metropolitan area (DMV). With this cross-sectional study, a questionnaire was administered in 2014 to parents of children (7-12 years old) residing in the DMV. Data were collected on children's active play, home built environment parental perceptions, and demographics. Active play response data were dichotomized by whether the child did or did not meet the 60-min/day Physical Activity Guidelines for Americans (PAGAs) recommendation. Perceived home neighborhood built environment data were also dichotomized. Chi-square tests determined differences in parental perceived built environment measures between active and non-active child groups. Logistic regression assessed the association of parental perceived built environment variables with active play while adjusting for demographic variables. The BEAP Study population (n = 144) included a uniquely diverse population of children with 23.7% African Americans and 10.4% Asian Americans. A statistically significant greater proportion of active children's parents agreed with the importance of neighborhood esthetics, active play areas, walkability and safety as compared to the parents of non-active children. Fully adjusted logistic regression models demonstrated that some parental perceived built environment measures (e.g. access to play equipment) were predictors of their children meeting the 60-min/day PAGA recommendation. Our findings support the important role of home neighborhood built environment perceptions on childhood active play.

Cenozoic Uplift and Climate Change of the Northeast Tibetan Plateau: Evidence from Leaf Wax Stable Isotopic Records

NASA Astrophysics Data System (ADS)

Hou, M.; Zhuang, G.; Wu, M.

2017-12-01

Topics about the deformation history and uplift mechanism of Tibetan Plateau have been largely debated in the past few decades. Different geodynamic models present different predictions on the mountain building processes and hence the surface uplift history. For example, one tectonic model suggests a rapid uplift (>1.0 to 2.0 km) of the Tibetan Plateau in the period of ca. 10 to 8 Ma as result of isostatic rebound due to the removal of over-thickened mental lithosphere beneath. Whilst the stepwise uplift model infers that the high topography was growing progressively from south to north with the Northeast Tibetan Plateau being built in the Pliocene to present. In this case, the timing of Cenozoic uplift of Northeast Tibetan Plateau would provide information for distinguishing competing geodynamic processes. The stable isotope based paleoaltimetry holds the key to answering when the high topography was built. Additionally, the evolution of Cenozoic Asian climate was argued to be closely related to the high topography built up on the Tibetan Plateau since the India-Asian collision and/or impacted by the global change. To understand when the high topography was built and how the growth of Tibetan Plateau impacted the climate, we reconstructed the long-term histories of paleohydrology from hinterland and foreland basins in the Northeast Tibetan Plateau. We applied the compound-specific isotope hydrogen analysis to leaf wax n-alkanes (δ2Hn-alk) that are preserved in well-dated stratigraphic series (ca. 24 Ma to the present) in the Northeast Tibetan Plateau. The newly reconstructed δ2Hn-alk supports the inference of high topography on the Northeast Tibetan Plateau was built during the middle to late Miocene. Our inference is consistent with sedimentary and basement rock studies that show fundamental changes in facies and provenance and exhumation history. The new δ2Hn-alk record also reveals that the regional climate became drier since the middle Miocene following the gain of high elevations on the plateau. Additionally, the late Cenozoic global cooling might impact the regional climate by influencing the precipitable moisture content.

Teachers' Implicit Meaning Systems and Their Implications for Pedagogical Thinking and Practice: A Case Study from Finland

ERIC Educational Resources Information Center

Rissanen, Inkeri; Kuusisto, Elina; Hanhimäki, Eija; Tirri, Kirsi

2018-01-01

This qualitative case study examines teachers' implicit meaning systems built around their core beliefs on the malleability of human qualities. Previous research has demonstrated the influence of students' implicit theories on motivation and achievement and has presented successful interventions for students. However, research on teachers'…

Solar Greenhouses and Sunspaces: Lessons Learned.

ERIC Educational Resources Information Center

Thomas, Stephen G.; And Others

Solar technology systems are being studied, managed, built and offered as an effective alternative energy option. This publication presents background material for the building and operation of better sunspaces and greenhouses. Recent developments in solar technology are explained and information on solar greenhouse and sunspace is provided (in…

In search of causality: a systematic review of the relationship between the built environment and physical activity among adults

PubMed Central

2011-01-01

Background Empirical evidence suggests that an association between the built environment and physical activity exists. This evidence is mostly derived from cross-sectional studies that do not account for other causal explanations such as neighborhood self-selection. Experimental and quasi-experimental designs can be used to isolate the effect of the built environment on physical activity, but in their absence, statistical techniques that adjust for neighborhood self-selection can be used with cross-sectional data. Previous reviews examining the built environment-physical activity relationship have not differentiated among findings based on study design. To deal with self-selection, we synthesized evidence regarding the relationship between objective measures of the built environment and physical activity by including in our review: 1) cross-sectional studies that adjust for neighborhood self-selection and 2) quasi-experiments. Method In September 2010, we searched for English-language studies on built environments and physical activity from all available years in health, leisure, transportation, social sciences, and geographical databases. Twenty cross-sectional and 13 quasi-experimental studies published between 1996 and 2010 were included in the review. Results Most associations between the built environment and physical activity were in the expected direction or null. Land use mix, connectivity and population density and overall neighborhood design were however, important determinants of physical activity. The built environment was more likely to be associated with transportation walking compared with other types of physical activity including recreational walking. Three studies found an attenuation in associations between built environment characteristics and physical activity after accounting for neighborhood self-selection. Conclusion More quasi-experiments that examine a broader range of environmental attributes in relation to context-specific physical activity and that measure changes in the built environment, neighborhood preferences and their effect on physical activity are needed. PMID:22077952

When social behaviour is moulded in clay: on growth and form of social insect nests.

PubMed

Perna, Andrea; Theraulaz, Guy

2017-01-01

The nests built by social insects are among the most complex structures produced by animal groups. They reveal the social behaviour of a colony and as such they potentially allow comparative studies. However, for a long time, research on nest architecture was hindered by the lack of technical tools allowing the visualisation of their complex 3D structures and the quantification of their properties. Several techniques, developed over the years, now make it possible to study the organisation of these nests and how they are built. Here, we review present knowledge of the mechanisms of nest construction, and how nest structure affects the behaviour of individual insects and the organisation of activities within a colony. © 2017. Published by The Company of Biologists Ltd.

Interactions of psychosocial factors with built environments in explaining adolescents' active transportation.

PubMed

Wang, Xiaobo; Conway, Terry L; Cain, Kelli L; Frank, Lawrence D; Saelens, Brian E; Geremia, Carrie; Kerr, Jacqueline; Glanz, Karen; Carlson, Jordan A; Sallis, James F

2017-07-01

The present study examined independent and interacting associations of psychosocial and neighborhood built environment variables with adolescents' reported active transportation. Moderating effects of adolescent sex were explored. Mixed-effects regression models were conducted on data from the Teen Environment and Neighborhood observational study (N=928) in the Seattle, WA and Baltimore regions 2009-2011. Frequency index of active transportation to neighborhood destinations (dependent variable) and 7 psychosocial measures were reported by adolescents. Built environment measures included home walkability and count of nearby parks and recreation facilities using GIS procedures and streetscape quality from environmental audits. Results indicated all 3 environmental variables and 3 psychosocial variables (self-efficacy, social support from peers, and enjoyment of physical activity) had significant positive main effects with active transportation (Ps<0.05). Three of 21 two-way interactions were significant in explaining active transportation (Ps<0.1): self-efficacy×GIS-based walkability index, barriers to activity in neighborhood×MAPS streetscape scores, and self-efficacy×GIS-based counts of parks and recreation facilities. In each two-way interaction the highest active transportation was found among adolescents with the combination of activity-supportive built environment and positive psychosocial characteristics. Three-way interactions with sex indicated similar associations for girls and boys, with one exception. Results provided modest support for the ecological model principle of interactions across levels, highlight the importance of both built environment and psychosocial factors in shaping adolescents' active transportation, demonstrated the possibility of sex-specific findings, and suggested strategies for improving adolescents' active transportation may be most effective when targeting multiple levels of influence. Copyright © 2017 Elsevier Inc. All rights reserved.

Numerical ‘health check’ for scientific codes: the CADNA approach

NASA Astrophysics Data System (ADS)

Scott, N. S.; Jézéquel, F.; Denis, C.; Chesneaux, J.-M.

2007-04-01

Scientific computation has unavoidable approximations built into its very fabric. One important source of error that is difficult to detect and control is round-off error propagation which originates from the use of finite precision arithmetic. We propose that there is a need to perform regular numerical 'health checks' on scientific codes in order to detect the cancerous effect of round-off error propagation. This is particularly important in scientific codes that are built on legacy software. We advocate the use of the CADNA library as a suitable numerical screening tool. We present a case study to illustrate the practical use of CADNA in scientific codes that are of interest to the Computer Physics Communications readership. In doing so we hope to stimulate a greater awareness of round-off error propagation and present a practical means by which it can be analyzed and managed.

Built environment and Property Crime in Seattle, 1998-2000: A Bayesian Analysis.

PubMed

Matthews, Stephen A; Yang, Tse-Chuan; Hayslett-McCall, Karen L; Ruback, R Barry

2010-06-01

The past decade has seen a rapid growth in the use of a spatial perspective in studies of crime. In part this growth has been driven by the availability of georeferenced data, and the tools to analyze and visualize them: geographic information systems (GIS), spatial analysis, and spatial statistics. In this paper we use exploratory spatial data analysis (ESDA) tools and Bayesian models to help better understand the spatial patterning and predictors of property crime in Seattle, Washington for 1998-2000, including a focus on built environment variables. We present results for aggregate property crime data as well as models for specific property crime types: residential burglary, nonresidential burglary, theft, auto theft, and arson. ESDA confirms the presence of spatial clustering of property crime and we seek to explain these patterns using spatial Poisson models implemented in WinBUGS. Our results indicate that built environment variables were significant predictors of property crime, especially the presence of a highway on auto theft and burglary.

Built environment and Property Crime in Seattle, 1998–2000: A Bayesian Analysis

PubMed Central

Matthews, Stephen A.; Yang, Tse-chuan; Hayslett-McCall, Karen L.; Ruback, R. Barry

2014-01-01

The past decade has seen a rapid growth in the use of a spatial perspective in studies of crime. In part this growth has been driven by the availability of georeferenced data, and the tools to analyze and visualize them: geographic information systems (GIS), spatial analysis, and spatial statistics. In this paper we use exploratory spatial data analysis (ESDA) tools and Bayesian models to help better understand the spatial patterning and predictors of property crime in Seattle, Washington for 1998–2000, including a focus on built environment variables. We present results for aggregate property crime data as well as models for specific property crime types: residential burglary, nonresidential burglary, theft, auto theft, and arson. ESDA confirms the presence of spatial clustering of property crime and we seek to explain these patterns using spatial Poisson models implemented in WinBUGS. Our results indicate that built environment variables were significant predictors of property crime, especially the presence of a highway on auto theft and burglary. PMID:24737924

The advancement of the built environment research through employment of structural equation modeling (SEM)

NASA Astrophysics Data System (ADS)

Wasilah, S.; Fahmyddin, T.

2018-03-01

The employment of structural equation modeling (SEM) in research has taken an increasing attention in among researchers in built environment. There is a gap to understand the attributes, application, and importance of this approach in data analysis in built environment study. This paper intends to provide fundamental comprehension of SEM method in data analysis, unveiling attributes, employment and significance and bestow cases to assess associations amongst variables and constructs. The study uses some main literature to grasp the essence of SEM regarding with built environment research. The better acknowledgment of this analytical tool may assist the researcher in the built environment to analyze data under complex research questions and to test multivariate models in a single study.

MnROAD cells 16-23 (phase II) : forensic investigation into recycled unbound base and asphalt surface materials.

DOT National Transportation Integrated Search

2017-06-01

This report presents the findings from an eight-year performance evaluation of eight cells (Cells 16-23) built at the Minnesota Road Research Facility (MnROAD) in 2008. The constructed cells were used for two performance evaluation studies of: 1) unb...

An Interactive Multimedia Learning Environment for VLSI Built with COSMOS

ERIC Educational Resources Information Center

Angelides, Marios C.; Agius, Harry W.

2002-01-01

This paper presents Bigger Bits, an interactive multimedia learning environment that teaches students about VLSI within the context of computer electronics. The system was built with COSMOS (Content Oriented semantic Modelling Overlay Scheme), which is a modelling scheme that we developed for enabling the semantic content of multimedia to be used…

MOST PROBABLE NUMBER (MPN) CALCULATOR Version 2.0 User and System Installation and Administration Manual

EPA Science Inventory

The new MPN Calculator is an easy-to-use stand alone Windows application built by Avineon, Inc. for the EPA. The calculator was built using Microsoft .NET (dot NET) version 3.5 SP1 (C#) and Windows Presentation Foundation technologies. The new calculator not only combines the mai...

Hybrid vehicle potential assessment. Volume 7: Hybrid vehicle review

NASA Technical Reports Server (NTRS)

Leschly, K. O.

1979-01-01

Review of hybrid vehicles built during the past ten years or planned to be built in the near future is presented. An attempt is made to classify and analyze these vehicles to get an overall picture of their key characteristics. The review includes onroad hybrid passenger cars, trucks, vans, and buses.

Teaching Children about Aspects of Comfort in the Built Environment

ERIC Educational Resources Information Center

Kowaltowski, Doris C. C. K.; Filho, Francisco Borges; Labaki, Lucila C.; Pina, Silvia A. Mikami G.; Bernardi, Nubia

2004-01-01

This article presents specific teaching material for the primary school level that introduces basic concepts of environmental comfort. The authors developed 2 booklets to make children aware of the built environment. Following a postoccupancy evaluation of state schools in the city of Campinas, in the state of Sao Paulo, Brazil, the research team…

Rapid model building of beta-sheets in electron-density maps.

PubMed

Terwilliger, Thomas C

2010-03-01

A method for rapidly building beta-sheets into electron-density maps is presented. beta-Strands are identified as tubes of high density adjacent to and nearly parallel to other tubes of density. The alignment and direction of each strand are identified from the pattern of high density corresponding to carbonyl and C(beta) atoms along the strand averaged over all repeats present in the strand. The beta-strands obtained are then assembled into a single atomic model of the beta-sheet regions. The method was tested on a set of 42 experimental electron-density maps at resolutions ranging from 1.5 to 3.8 A. The beta-sheet regions were nearly completely built in all but two cases, the exceptions being one structure at 2.5 A resolution in which a third of the residues in beta-sheets were built and a structure at 3.8 A in which under 10% were built. The overall average r.m.s.d. of main-chain atoms in the residues built using this method compared with refined models of the structures was 1.5 A.

(Re)Designing Writing in English Class: A Multimodal Approach to Teaching Writing

ERIC Educational Resources Information Center

Rowsell, Jennifer; Decoste, Eryn

2012-01-01

Based on a 2-year ethnographic study in an urban secondary school in Toronto, the article presents how a teacher and a researcher teach Grade 11 students through a design-based approach to teaching and learning in English class. Built on research and pedagogy on design, the authors designed a programme of study as an alternative to more…

Training and testing ERP-BCIs under different mental workload conditions

NASA Astrophysics Data System (ADS)

Ke, Yufeng; Wang, Peiyuan; Chen, Yuqian; Gu, Bin; Qi, Hongzhi; Zhou, Peng; Ming, Dong

2016-02-01

Objective. As one of the most popular and extensively studied paradigms of brain-computer interfaces (BCIs), event-related potential-based BCIs (ERP-BCIs) are usually built and tested in ideal laboratory settings in most existing studies, with subjects concentrating on stimuli and intentionally avoiding possible distractors. This study is aimed at examining the effect of simultaneous mental activities on ERP-BCIs by manipulating various levels of mental workload during the training and/or testing of an ERP-BCI. Approach. Mental workload was manipulated during the training or testing of a row-column P300-speller to investigate how and to what extent the spelling performance and the ERPs evoked by the oddball stimuli are affected by simultaneous mental workload. Main results. Responses of certain ERP components, temporal-occipital N200 and the late reorienting negativity evoked by the oddball stimuli and the classifiability of ERP features between targets and non-targets decreased with the increase of mental workload encountered by the subject. However, the effect of mental workload on the performance of ERP-BCI was not always negative but depended on the conditions where the ERP-BCI was built and applied. The performance of ERP-BCI built under an ideal lab setting without any irrelevant mental activities declined with the increasing mental workload of the testing data. However, the performance was significantly improved when an ERP-BCI was built under an appropriate mental workload level, compared to that built under speller-only conditions. Significance. The adverse effect of concurrent mental activities may present a challenge for ERP-BCIs trained in ideal lab settings but which are to be used in daily work, especially when users are performing demanding mental processing. On the other hand, the positive effects of the mental workload of the training data suggest that introducing appropriate mental workload during training ERP-BCIs is of potential benefit to the performance in practical applications.

Walkability for Different Urban Granularities

NASA Astrophysics Data System (ADS)

Hollenstein, D.; Bleisch, S.

2016-06-01

The positive effects of low-intensity physical activity are widely acknowledged and in this context walking is often promoted as an active form of transport. Under the concept of walkability the role of the built environment in encouraging walking is investigated. For that purpose, walkability is quantified area-wise by measuring a varying set of built environment attributes. In purely GIS-based approaches to studying walkability, indices are generally built using existing and easily accessible data. These include street network design, population density, land use mix, and access to destinations. Access to destinations is usually estimated using either a fixed radius, or distances in the street network. In this paper, two approaches to approximate a footpath network are presented. The two footpath networks were built making different assumptions regarding the walkability of different street types with respect to more or less restrictive safety preferences. Information on sidewalk presence, pedestrian crossings, and traffic restrictions were used to build both networks. The first network comprises car traffic free areas only. The second network includes streets with low speed limits that have no sidewalks. Both networks are compared to the more commonly used street network in an access-to-distance analysis. The results suggest that for the generally highly walkable study area, access to destination mostly depends on destination density within the defined walkable distance. However, on single street segments access to destinations is diminished when only car traffic free spaces are assumed to be walkable.

Description of Dogs and Owners in Outdoor Built-Up Areas and Their More-Than-Human Issues

NASA Astrophysics Data System (ADS)

Gaunet, Florence; Pari-Perrin, Elodie; Bernardin, Geneviève

2014-09-01

Tensions are generated by the inevitable presence of dogs accompanying humans in cities. Built-up outdoor areas, spaces that are "in between" the home and dog parks, are widely frequented by dogs and their owners. The present case study, performed in Lyon (France), is the first to provide a description of these dyads in areas that vary according to terrain, district, dog legislation and use in three areas: a busy street where dogs are allowed and a park and a square where dogs are forbidden. Dog-owner profiles were identified. They adjusted their presence differently across areas and according to anthropogenic and ecological pressures, such as day of the week, time of day, weather, frequentation, and legislation. They mutually adapted their behaviors. Interactions between dogs or owners and other social agents were few; dogs primarily sniffed and urinated. There was little barking, no aggression, minor impact on the environment, and, despite instances of dogs appropriating forbidden areas and dogs off their leashes, the dogs seemed to go virtually unnoticed. The study shows how the need for more-than-human areas is evident in outdoor built-up areas (for instance, the results on types of interaction and activity across areas, absence of a leash, and appropriation of forbidden areas) as well as how the cultural and natural aspects of dogs play out. The results suggest that dog regulations should be adjusted in outdoor built-up areas and that dog parks should be developed.

Stakeholder Alignment for Requirements in GEOValue

NASA Astrophysics Data System (ADS)

Cutcher-Gershenfeld, J.; King, J. L.

2016-12-01

Observation systems that collect information on environmental parameters relevant to biological and physical earth resources provide value. This has been demonstrated so many times in so many ways that it is not worth deliberating. Earlier projects for research (whether it is possible to do this or that), or for "dual use," typically involving defense, have been successful. Wealthy parties have built their own systems. Less wealthy parties seek to sustain the systems they have built. The history of systems suggests that "requirements" will be the next step. The objective is to maximize the "return" on the substantial investment required for construction, deployment, maintenance and renewal of observation systems. Stakeholders and their interests are assessed to construct the requirements from which specifications are built. Specifications drive procurement, and procurement produces built systems. Complicated (e.g. space-based) systems have long times between requirements analysis and deployment. It all depends on getting the requirements right, which depends on understanding stakeholders and requirements. And this is where things get complicated. Stakeholders and interests change, sometimes rapidly, as what is possible is altered. It becomes increasingly difficult to achieve stakeholder alignment required for effective management of constituent politics at the heart of any expensive endeavor. This paper presents results from a major study of stakeholder alignment in the Earth Sciences, focused especially on EarthCube.

Complex facial deformity reconstruction with a surgical guide incorporating a built-in occlusal stent as the positioning reference.

PubMed

Fang, Jing-Jing; Liu, Jia-Kuang; Wu, Tzu-Chieh; Lee, Jing-Wei; Kuo, Tai-Hong

2013-05-01

Computer-aided design has gained increasing popularity in clinical practice, and the advent of rapid prototyping technology has further enhanced the quality and predictability of surgical outcomes. It provides target guides for complex bony reconstruction during surgery. Therefore, surgeons can efficiently and precisely target fracture restorations. Based on three-dimensional models generated from a computed tomographic scan, precise preoperative planning simulation on a computer is possible. Combining the interdisciplinary knowledge of surgeons and engineers, this study proposes a novel surgical guidance method that incorporates a built-in occlusal wafer that serves as the positioning reference.Two patients with complex facial deformity suffering from severe facial asymmetry problems were recruited. In vitro facial reconstruction was first rehearsed on physical models, where a customized surgical guide incorporating a built-in occlusal stent as the positioning reference was designed to implement the surgery plan. This study is intended to present the authors' preliminary experience in a complex facial reconstruction procedure. It suggests that in regions with less information, where intraoperative computed tomographic scans or navigation systems are not available, our approach could be an effective, expedient, straightforward aid to enhance surgical outcome in a complex facial repair.

Identification of Increasing Green Behaviour in Citraland Bagya City, Medan

NASA Astrophysics Data System (ADS)

Aulia, D. N.; Marpaung, B. O. Y.; Suryani, L.

2017-03-01

This present time, Indonesia just began applying the concept of Green Architecture. The actions require community participation as residents and the users of the building. The built environment is designed around the idea of Green Architecture but inhabited and managed improperly; the goal of sustainable built environment is not achieved. The aspect of behaviour is the key factor in the implementation of Green Architecture’s concept. This research is a descriptive exploratory which is to identify the problems to the implementation of Green Architecture’s concept in planned housing. Then the study will explore the components causes of the problems used as a problem solver. The study conducted on the living behaviour in Citraland Bagya City’s resident. The estate is designed and built with the concept of Green Architecture in Medan city. The research was carried out by the four aspects of housing are the physical, social and cultural, policy, and management issue. These three components will indirectly relate to the economic issues that are the efficiency and effectiveness of living behaviour. The results showed that the increasing of green behavior is still small and the occupant requires motivation and socialization of living green.

Environmental supports for walking/biking and traffic safety: income and ethnicity disparities.

PubMed

Yu, Chia-Yuan

2014-10-01

The present study investigates the influence of income, ethnicity, and built environmental characteristics on the percentages of workers who walk/bike as well as on pedestrian/cyclist crash rates. Furthermore, income and ethnicity disparities are also explored. This study chose 162 census tracts in Austin as the unit of analysis. To explore income and ethnicity differences in built environments, this study examined the associations of the poverty rate, the percentage of white population, and the percentage of Hispanic population to each built environmental variable. Path models were applied to examine environmental supports of walking/biking and pedestrian/cyclist safety. Areas with high poverty rates had more biking trips and experienced more cyclist crashes, while areas with a high percentage of white population generated more walking trips and fewer pedestrian crashes. Sidewalk completeness and mixed land uses promoted walking to work but increased the crash risk for pedestrians as well. In terms of biking behaviors, road density and transit stop density both increased biking trips and cyclist crashes. Environmental designs that both encourage walking/biking trips and generate more safety threats should attract more attention from policy makers. Policies should also be more devoted to enhancing the mobility and health for areas with high poverty rates. Copyright © 2014 Elsevier Inc. All rights reserved.

Built Environment and Active Transport to School (BEATS) Study: protocol for a cross-sectional study

PubMed Central

Mandic, Sandra; Williams, John; Moore, Antoni; Hopkins, Debbie; Flaherty, Charlotte; Wilson, Gordon; García Bengoechea, Enrique; Spence, John C

2016-01-01

Introduction Active transport to school (ATS) is a convenient way to increase physical activity and undertake an environmentally sustainable travel practice. The Built Environment and Active Transport to School (BEATS) Study examines ATS in adolescents in Dunedin, New Zealand, using ecological models for active transport that account for individual, social, environmental and policy factors. The study objectives are to: (1) understand the reasons behind adolescents and their parents' choice of transport mode to school; (2) examine the interaction between the transport choices, built environment, physical activity and weight status in adolescents; and (3) identify policies that promote or hinder ATS in adolescents. Methods and analysis The study will use a mixed-method approach incorporating both quantitative (surveys, anthropometry, accelerometers, Geographic Information System (GIS) analysis, mapping) and qualitative methods (focus groups, interviews) to gather data from students, parents, teachers and school principals. The core data will include accelerometer-measured physical activity, anthropometry, GIS measures of the built environment and the use of maps indicating route to school (students)/work (parents) and perceived safe/unsafe areas along the route. To provide comprehensive data for understanding how to change the infrastructure to support ATS, the study will also examine complementary variables such as individual, family and social factors, including student and parental perceptions of walking and cycling to school, parental perceptions of different modes of transport to school, perceptions of the neighbourhood environment, route to school (students)/work (parents), perceptions of driving, use of information communication technology, reasons for choosing a particular school and student and parental physical activity habits, screen time and weight status. The study has achieved a 100% school recruitment rate (12 secondary schools). Ethics and dissemination The study has been approved by the University of Otago Ethics Committee. The results will be actively disseminated through reports and presentations to stakeholders, symposiums and scientific publications. PMID:27221127

Spatiotemporal Built-up Land Density Mapping Using Various Spectral Indices in Landsat-7 ETM+ and Landsat-8 OLI/TIRS (Case Study: Surakarta City)

NASA Astrophysics Data System (ADS)

Risky, Yanuar S.; Aulia, Yogi H.; Widayani, Prima

2017-12-01

Spectral indices variations support for rapid and accurate extracting information such as built-up density. However, the exact determination of spectral waves for built-up density extraction is lacking. This study explains and compares the capabilities of 5 variations of spectral indices in spatiotemporal built-up density mapping using Landsat-7 ETM+ and Landsat-8 OLI/TIRS in Surakarta City on 2002 and 2015. The spectral indices variations used are 3 mid-infrared (MIR) based indices such as the Normalized Difference Built-up Index (NDBI), Urban Index (UI) and Built-up and 2 visible based indices such as VrNIR-BI (visible red) and VgNIR-BI (visible green). Linear regression statistics between ground value samples from Google Earth image in 2002 and 2015 and spectral indices for determining built-up land density. Ground value used amounted to 27 samples for model and 7 samples for accuracy test. The classification of built-up density mapping is divided into 9 classes: unclassified, 0-12.5%, 12.5-25%, 25-37.5%, 37.5-50%, 50-62.5%, 62.5-75%, 75-87.5% and 87.5-100 %. Accuracy of built-up land density mapping in 2002 and 2015 using VrNIR-BI (81,823% and 73.235%), VgNIR-BI (78.934% and 69.028%), NDBI (34.870% and 74.365%), UI (43.273% and 64.398%) and Built-up (59.755% and 72.664%). Based all spectral indices, Surakarta City on 2000-2015 has increased of built-up land density. VgNIR-BI has better capabilities for built-up land density mapping on Landsat-7 ETM + and Landsat-8 OLI/TIRS.

Alternative Fuels Data Center: Natural Gas Stations Abound on Oklahoma's

Science.gov Websites

" Our stakeholders are proud to have built a first-of-its-kind CNG corridor that's helping local Pollard of Central Oklahoma Clean Cities (OKCC). "Our stakeholders are proud to have built a first-of Fallin presented her Oklahoma First Energy Plan, the state's first comprehensive energy plan. The plan

Note: Design and implementation of a home-built imaging system with low jitter for cold atom experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hachtel, A. J.; Gillette, M. C.; Clements, E. R.

A novel home-built system for imaging cold atom samples is presented using a readily available astronomy camera which has the requisite sensitivity but no timing-control. We integrate the camera with LabVIEW achieving fast, low-jitter imaging with a convenient user-defined interface. We show that our system takes precisely timed millisecond exposures and offers significant improvements in terms of system jitter and readout time over previously reported home-built systems. Our system rivals current commercial “black box” systems in performance and user-friendliness.

Geographic Information System (Gis) for Culinary in Pekanbaru using Herversine Formula

NASA Astrophysics Data System (ADS)

Yunefri, Yogi; Devega, Mariza; Kristanto, Dwi

2017-12-01

Pekanbaru is one of a big city in Indonesia with 897.767 inhabitants’ population on 2010. There are various cultures of the population. That diversity presents the difference of culinary in Pekanbaru, so Pekanbaru be one of the cities which appropriate for culinary that give charm circumstance and worth to taste. One of the obstacles that often occur is the tourists still difficult to find the right and nice place to eat, close to tourism place and find information about culinary is difficult as well. Therefore a web-based GIS application built to give information about culinary in Pekanbaru. This application built through some steps, i.e. system analysis, design system, implementation, and testing. This application built using PHP as a programming language and harversine Formula as a method to fine the closest distance. After it built the application, the data of culinary tested used black box. The result shows that testing using this application is similar with the manual test. Thus the application has been built correctly.

Education for All and the New Development Compact

ERIC Educational Resources Information Center

Mundy, Karen

2006-01-01

Over the past decade, the achievement of universal primary education, under the somewhat misleading rubric of "Education for All" (EFA), has steadily built momentum in international forums as a focus for discussion and action. The present study looks critically at the evolution of consensus about EFA within the international community. The first…

Predicting Student Actions in a Procedural Training Environment

ERIC Educational Resources Information Center

Riofrio-Luzcando, Diego; Ramirez, Jaime; Berrocal-Lobo, Marta

2017-01-01

Data mining is known to have a potential for predicting user performance. However, there are few studies that explore its potential for predicting student behavior in a procedural training environment. This paper presents a collective student model, which is built from past student logs. These logs are first grouped into clusters. Then, an…

Challenges in Integrating a Complex Systems Computer Simulation in Class: An Educational Design Research

ERIC Educational Resources Information Center

Loke, Swee-Kin; Al-Sallami, Hesham S.; Wright, Daniel F. B.; McDonald, Jenny; Jadhav, Sheetal; Duffull, Stephen B.

2012-01-01

Complex systems are typically difficult for students to understand and computer simulations offer a promising way forward. However, integrating such simulations into conventional classes presents numerous challenges. Framed within an educational design research, we studied the use of an in-house built simulation of the coagulation network in four…

Parenting Beliefs, Parental Stress, and Social Support Relationships

ERIC Educational Resources Information Center

Respler-Herman, Melissa; Mowder, Barbara A.; Yasik, Anastasia E.; Shamah, Renee

2012-01-01

The present study built on prior research by examining the relationship of parental stress and social support to parenting beliefs and behaviors. A sample of 87 parents provided their views concerning the importance of parenting characteristics as well as their level of parental stress and perceived social support. These parents completed the…

Interactive and independent associations between the socioeconomic and objective built environment on the neighbourhood level and individual health: a systematic review of multilevel studies.

PubMed

Schüle, Steffen Andreas; Bolte, Gabriele

2015-01-01

The research question how contextual factors of neighbourhood environments influence individual health has gained increasing attention in public health research. Both socioeconomic neighbourhood characteristics and factors of the built environment play an important role for health and health-related behaviours. However, their reciprocal relationships have not been systematically reviewed so far. This systematic review aims to identify studies applying a multilevel modelling approach which consider both neighbourhood socioeconomic position (SEP) and factors of the objective built environment simultaneously in order to disentangle their independent and interactive effects on individual health. The three databases PubMed, PsycINFO, and Web of Science were systematically searched with terms for title and abstract screening. Grey literature was not included. Observational studies from USA, Canada, Australia, New Zealand, and Western European countries were considered which analysed simultaneously factors of neighbourhood SEP and the objective built environment with a multilevel modelling approach. Adjustment for individual SEP was a further inclusion criterion. Thirty-three studies were included in qualitative synthesis. Twenty-two studies showed an independent association between characteristics of neighbourhood SEP or the built environment and individual health outcomes or health-related behaviours. Twenty-one studies found cross-level or within-level interactions either between neighbourhood SEP and the built environment, or between neighbourhood SEP or the built environment and individual characteristics, such as sex, individual SEP or ethnicity. Due to the large variation of study design and heterogeneous reporting of results the identification of consistent findings was problematic and made quantitative analysis not possible. There is a need for studies considering multiple neighbourhood dimensions and applying multilevel modelling in order to clarify their causal relationship towards individual health. Especially, more studies using comparable characteristics of neighbourhood SEP and the objective built environment and analysing interactive effects are necessary to disentangle health impacts and identify vulnerable neighbourhoods and population groups.

Interactive and Independent Associations between the Socioeconomic and Objective Built Environment on the Neighbourhood Level and Individual Health: A Systematic Review of Multilevel Studies

PubMed Central

Schüle, Steffen Andreas; Bolte, Gabriele

2015-01-01

Background The research question how contextual factors of neighbourhood environments influence individual health has gained increasing attention in public health research. Both socioeconomic neighbourhood characteristics and factors of the built environment play an important role for health and health-related behaviours. However, their reciprocal relationships have not been systematically reviewed so far. This systematic review aims to identify studies applying a multilevel modelling approach which consider both neighbourhood socioeconomic position (SEP) and factors of the objective built environment simultaneously in order to disentangle their independent and interactive effects on individual health. Methods The three databases PubMed, PsycINFO, and Web of Science were systematically searched with terms for title and abstract screening. Grey literature was not included. Observational studies from USA, Canada, Australia, New Zealand, and Western European countries were considered which analysed simultaneously factors of neighbourhood SEP and the objective built environment with a multilevel modelling approach. Adjustment for individual SEP was a further inclusion criterion. Results Thirty-three studies were included in qualitative synthesis. Twenty-two studies showed an independent association between characteristics of neighbourhood SEP or the built environment and individual health outcomes or health-related behaviours. Twenty-one studies found cross-level or within-level interactions either between neighbourhood SEP and the built environment, or between neighbourhood SEP or the built environment and individual characteristics, such as sex, individual SEP or ethnicity. Due to the large variation of study design and heterogeneous reporting of results the identification of consistent findings was problematic and made quantitative analysis not possible. Conclusions There is a need for studies considering multiple neighbourhood dimensions and applying multilevel modelling in order to clarify their causal relationship towards individual health. Especially, more studies using comparable characteristics of neighbourhood SEP and the objective built environment and analysing interactive effects are necessary to disentangle health impacts and identify vulnerable neighbourhoods and population groups. PMID:25849569

The built environment and older adults: A literature review and an applied approach to engaging older adults in built environment improvements for health.

PubMed

Tuckett, Anthony G; Banchoff, Ann W; Winter, Sandra J; King, Abby C

2018-03-01

This paper presents a review of the literature about the built environment as it impacts the health of older people. It then introduces the gerontological nurse and researcher to the Our Voice framework for engaging older people as citizen scientists in order to empower them as agents of change in improving their local built environment and ultimately advancing community health. Community-level strategies to promote successful ageing in place are critical both to optimising health outcomes and containing healthcare costs. Such strategies must take into account the influence of the built environment both on individual health behaviours and on overall community health. At the same time, the perspectives and experiences of older people themselves ought to inform policies and practices in a systematic way. Integrative literature review. A wide scan of English language articles published in the EMBASE, PubMed and CINAHL bibliographic databases was conducted. Additional articles were sourced by mining relevant reference lists (i.e., snowball sampling). Papers included were published between 2005 and 2016. Three distinct components emerged from the review: the impact of the built environment on health-in particular the health of older persons; citizen science and its applicability for older people research; and the promise of the Our Voice citizen science framework to activate changes in the built environment that improve older peoples' health. The ageing of the world's population brings with it an increased population-level risk of chronic disease and disability. We present the Our Voice framework, developed by researchers at Stanford University, as a promising strategy for engaging and empowering older people as citizen scientists, as a framework to apply to gerontological nursing and improving community health. Gerontology nurses are encouraged to: (i) Recognise the impact of the built environment and other community-level factors on the health of their patients. (ii) Encourage older adults to take an active role in documenting features of their environments that promote or hinder healthy living. (iii) Support policies and programmes that promote healthy environments. © 2017 John Wiley & Sons Ltd.

Purpose in Life and Prayer among Catholic and Protestant Adolescents in Northern Ireland

ERIC Educational Resources Information Center

Robbins, Mandy; Francis, Leslie J.

2005-01-01

The present study has built on three earlier studies reported by Francis and Burton (1994), Francis and Evans (1996), and Francis (2005) to test the hypothesis that there is a positive correlation between frequency of prayer and perceived purpose in life among 13-to 15-year-old young people who are within a community with high levels of church…

Education Reform Policy and Early Childhood Teacher Education in Hong Kong before and after the Transfer of Sovereignty to China in 1997

ERIC Educational Resources Information Center

Yuen, Gail

2008-01-01

Built on a sociocultural framework of policy analysis and Wertsch's concept of mediation, the present study examines how early childhood teacher education has changed as a result of interactions between reform policy and the action of teacher educators. Ten teacher educators participated in the study, along with eight early childhood leaders, 15…

Jim Starnes' Contributions to Residual Strength Analysis Methods for Metallic Structures

NASA Technical Reports Server (NTRS)

Young, Richard D.; Rose, Cheryl A.; Harris, Charles E.

2005-01-01

A summary of advances in residual strength analyses methods for metallic structures that were realized under the leadership of Dr. James H. Starnes, Jr., is presented. The majority of research led by Dr. Starnes in this area was conducted in the 1990's under the NASA Airframe Structural Integrity Program (NASIP). Dr. Starnes, respectfully referred to herein as Jim, had a passion for studying complex response phenomena and dedicated a significant amount of research effort toward advancing damage tolerance and residual strength analysis methods for metallic structures. Jim's efforts were focused on understanding damage propagation in built-up fuselage structure with widespread fatigue damage, with the goal of ensuring safety in the aging international commercial transport fleet. Jim's major contributions in this research area were in identifying the effects of combined internal pressure and mechanical loads, and geometric nonlinearity, on the response of built-up structures with damage. Analytical and experimental technical results are presented to demonstrate the breadth and rigor of the research conducted in this technical area. Technical results presented herein are drawn exclusively from papers where Jim was a co-author.

Four decades urban growth and land use change in Samara Russia through remote sensing and GIS techniques

NASA Astrophysics Data System (ADS)

Boori, Mukesh Singh; Choudhary, Komal; Kupriyanov, Alexander; Kovelskiy, Viktor

2015-12-01

This study illustrates the spatio-temporal dynamics of urban growth and land use changes in Samara city, Russia from 1975 to 2015. Landsat satellite imageries of five different time periods from 1975 to 2015 were acquired and quantify the changes with the help of ArcGIS 10.1 Software. By applying classification methods to the satellite images four main types of land use were extracted: water, built-up, forest and grassland. Then, the area coverage for all the land use types at different points in time were measured and coupled with population data. The results demonstrate that, over the entire study period, population was increased from 1146 thousand people to 1244 thousand from 1975 to 1990 but later on first reduce and then increase again, now 1173 thousand population. Built-up area is also change according to population. The present study revealed an increase in built-up by 37.01% from 1975 to 1995, than reduce -88.83% till 2005 and an increase by 39.16% from 2005 to 2015, along with the increase in population, migration from rural areas owing to the economic growth and technological advantages associated with urbanization. Information on urban growth, land use and land cover change study is very useful to local government and urban planners for the betterment of future plans to sustainable development of the city.

Development of an angle-scanning spectropolarimeter: Preliminary results

NASA Astrophysics Data System (ADS)

Nouri, Sahar A.; Gregory, Don A.; Fuller, Kirk

2018-02-01

A fixed-angle spectropolarimeter capable of measuring the Mueller matrix of particle deposits and conventional optical elements over the 300-1100 nm spectral range has been built, calibrated and extensively tested. A second generation of this instrument is being built which can scan from 0° to near 180° in both scattering angle and sample orientation, enabling studies of the bidirectional Mueller matrices of nanoparticle arrays, atmospheric aerosol deposits, and nano- and microstructured surfaces. This system will also provide a much needed metrology capability for fully characterizing the performance of optical devices and device components from the near-infrared through the medium wave ultraviolet. Experimental results taken using the first generation fixed-angle arrangement will be presented along with the rationale for building the second.

RED or READ: the built environment is colored

NASA Astrophysics Data System (ADS)

Smith, Dianne

2002-06-01

How important is color in the design of our built environment? Prototypes and massing models for designs are often presented in white or monochromatic combinations, irrespective of the materials incorporated and the colors that may be applied in the final constructed building, interior or object. Therefore, it is of interest to identify the way color is positioned by designers in how they go about the business of making environments. The built environment is understood by the designers and design researchers generally in one of four fields - as object, as product, as communicator, or as social domain. In addition, Franz identified four conceptions of designing held by designers - the experiential conception, the structural conception, the production conception and the retail conception. Fashion and style are often associated with color in a local context and may simply be applied to the physical environment because it is in fashion, rather than because of what it communicates more broadly. It is assumed that the integration of color in the built environment is influenced by these understandings. In order to address color's position in the design process and the importance of color in relation to space, form, and the experience of place, a selection of Queensland architects and interior designers were surveyed. The study is not conclusive, however, it does identify differences and commonalities between the participants that are of interest in light of the above issues. Explorations into environmental meaning, in addition to color theory and decorative applications, are hypothesized to be important sources of information for designers involved in the coloration of the built environment.

Making Time for Nature: Visual Exposure to Natural Environments Lengthens Subjective Time Perception and Reduces Impulsivity

PubMed Central

Berry, Meredith S.; Repke, Meredith A.; Nickerson, Norma P.; Conway, Lucian G.; Odum, Amy L.; Jordan, Kerry E.

2015-01-01

Impulsivity in delay discounting is associated with maladaptive behaviors such as overeating and drug and alcohol abuse. Researchers have recently noted that delay discounting, even when measured by a brief laboratory task, may be the best predictor of human health related behaviors (e.g., exercise) currently available. Identifying techniques to decrease impulsivity in delay discounting, therefore, could help improve decision-making on a global scale. Visual exposure to natural environments is one recent approach shown to decrease impulsive decision-making in a delay discounting task, although the mechanism driving this result is currently unknown. The present experiment was thus designed to evaluate not only whether visual exposure to natural (mountains, lakes) relative to built (buildings, cities) environments resulted in less impulsivity, but also whether this exposure influenced time perception. Participants were randomly assigned to either a natural environment condition or a built environment condition. Participants viewed photographs of either natural scenes or built scenes before and during a delay discounting task in which they made choices about receiving immediate or delayed hypothetical monetary outcomes. Participants also completed an interval bisection task in which natural or built stimuli were judged as relatively longer or shorter presentation durations. Following the delay discounting and interval bisection tasks, additional measures of time perception were administered, including how many minutes participants thought had passed during the session and a scale measurement of whether time "flew" or "dragged" during the session. Participants exposed to natural as opposed to built scenes were less impulsive and also reported longer subjective session times, although no differences across groups were revealed with the interval bisection task. These results are the first to suggest that decreased impulsivity from exposure to natural as opposed to built environments may be related to lengthened time perception. PMID:26558610

Simulation based optimized beam velocity in additive manufacturing

NASA Astrophysics Data System (ADS)

Vignat, Frédéric; Béraud, Nicolas; Villeneuve, François

2017-08-01

Manufacturing good parts with additive technologies rely on melt pool dimension and temperature and are controlled by manufacturing strategies often decided on machine side. Strategies are built on beam path and variable energy input. Beam path are often a mix of contour and hatching strategies filling the contours at each slice. Energy input depend on beam intensity and speed and is determined from simple thermal models to control melt pool dimensions and temperature and ensure porosity free material. These models take into account variation in thermal environment such as overhanging surfaces or back and forth hatching path. However not all the situations are correctly handled and precision is limited. This paper proposes new method to determine energy input from full built chamber 3D thermal simulation. Using the results of the simulation, energy is modified to keep melt pool temperature in a predetermined range. The paper present first an experimental method to determine the optimal range of temperature. In a second part the method to optimize the beam speed from the simulation results is presented. Finally, the optimized beam path is tested in the EBM machine and built part are compared with part built with ordinary beam path.

Zinc-chloride battery technology - Status 1983

NASA Astrophysics Data System (ADS)

Rowan, J. W.; Carr, P.; Warde, C. J.; Henriksen, G. L.

Zinc-chloride batteries are presently under development at Energy Development Associates (EDA) for load-leveling, electric-vehicle, and specialty applications. A 500-kWh battery system has been built at Detroit Edison's Charlotte substation near downtown Detroit. Following shakedown testing, this system will be installed at the Battery Energy Storage Test (BEST) Facility in Hillsborough, New Jersey, in July 1983. Data is presented also for a prototype 50-kWh battery which has successfully operated through 150 cycles. EDA has built and tested three 4-passenger automobiles. The maximum range achieved on a single charge was 200 miles at 40 mph. Recently, the electric-vehicle battery program at EDA has focused on commercial vehicles. Two vans, each powered with a 45-kWh zinc-chloride battery, have been built and track tested. These vehicles, which carry a payload of 1,000 pounds, have a top speed of 55 mph and an operational range in excess of 80 miles. In the specialty battery area, two 6-kWh 12-V reserve batteries have been built and tested. This type of battery offers the prospect of long shelf life and an energy density in excess of 100 Wh/lb.

A land cover change study in the Highlands of Northern Ethiopia using a flight of aerial photographs dating back to the 1930s

NASA Astrophysics Data System (ADS)

Guyassa, Etefa; Frankl, Amaury; Zenebe, Amanuel; Lanckriet, Sil; Demissie, Biadgilgn; Zenebe, Gebreyohanis; Poesen, Jean; Nyssen, Jan

2016-04-01

In the Highlands of Northern Ethiopia, land degradation is claimed to have occurred over a long time mainly due agricultural practices and lack of land management. However, quantitative information on the long term land use, cover and management change is rare. The knowledge of such historical changes is essential for the present and future land management for sustainable development, especially in an agriculture-based economy. Hence, this study aimed to investigate the changes of land use, cover and management around Hagere Selam, Northern Ethiopia, over the last 80 years (1935 - 2014). We recovered a flight of ten aerial photographs at an approximate scale of 1:11,500, realized by the Italian Military Geographical Institute in 1935, along a mountain ridge between 13.6490°N, 39.1848°E and 13.6785°N, 39.2658°E. Jointly with Google Earth images (2014), the historical aerial photographs were used to compare changes over the long time. The point-count technique was used by overlaying a grid of 18 x 15 points (small squares) on 20 cm x 15 cm aerial photographs and on Google Earth images representing the same area. Occurrence of major land cover types (cropland, forest, grassland, shrubland, bare land, built-up areas and water body) was counted to compute their proportion in 1935 and 2014. In 1935, cropland, shrubland and built-up areas were predominant while other land cover types were not observed. On the Google Earth images, all categories were observed except forest. The results show that in both times cropland was the dominant land cover followed by shrubland. The proportion of cropland at present (70.5%) is approximately the same as in the 1930s (72%), but shrubland decreased and bare land, grassland and built-up areas have increased. Hence, the large share of cropland was maintained over the past long period without allowing for woody vegetation to expand its area, while some cropland was abandoned and converted to grassland and bare land. The increased proportion of built-up areas also explains the shrinking of shrubland. On the studied flight of aerial photographs, forests were not existing in 1935 and have not been restored until present. The increased area of open water, on the other hand, is related to the ongoing land rehabilitation activities carried out in the region. These results confirm previous studies that severe land degradation has occurred in the Highlands of Northern Ethiopia over a long time, due to early (pre-1935) cropland expansion and deforestation.

a Webgis for the Knowledge and Conservation of the Historical Wall Structures of the 13TH-18TH Centuries

NASA Astrophysics Data System (ADS)

Vacca, G.; Pili, D.; Fiorino, D. R.; Pintus, V.

2017-05-01

The presented work is part of the research project, titled "Tecniche murarie tradizionali: conoscenza per la conservazione ed il miglioramento prestazionale" (Traditional building techniques: from knowledge to conservation and performance improvement), with the purpose of studying the building techniques of the 13th-18th centuries in the Sardinia Region (Italy) for their knowledge, conservation, and promotion. The end purpose of the entire study is to improve the performance of the examined structures. In particular, the task of the authors within the research project was to build a WebGIS to manage the data collected during the examination and study phases. This infrastructure was entirely built using Open Source software. The work consisted of designing a database built in PostgreSQL and its spatial extension PostGIS, which allows to store and manage feature geometries and spatial data. The data input is performed via a form built in HTML and PHP. The HTML part is based on Bootstrap, an open tools library for websites and web applications. The implementation of this template used both PHP and Javascript code. The PHP code manages the reading and writing of data to the database, using embedded SQL queries. As of today, we surveyed and archived more than 300 buildings, belonging to three main macro categories: fortification architectures, religious architectures, residential architectures. The masonry samples investigated in relation to the construction techniques are more than 150. The database is published on the Internet as a WebGIS built using the Leaflet Javascript open libraries, which allows creating map sites with background maps and navigation, input and query tools. This too uses an interaction of HTML, Javascript, PHP and SQL code.

Creating neighbourhood groupings based on built environment features to facilitate health promotion activities.

PubMed

Schopflocher, Donald; VanSpronsen, Eric; Spence, John C; Vallianatos, Helen; Raine, Kim D; Plotnikoff, Ronald C; Nykiforuk, Candace I J

2012-07-26

Detailed assessments of the built environment often resist data reduction and summarization. This project sought to develop a method of reducing built environment data to an extent that they can be effectively communicated to researchers and community stakeholders. We aim to help in an understanding of how these data can be used to create neighbourhood groupings based on built environment characteristics and how the process of discussing these neighbourhoods with community stakeholders can result in the development of community-informed health promotion interventions. We used the Irvine Minnesota Inventory (IMI) to assess 296 segments of a semi-rural community in Alberta. Expert raters "created" neighbourhoods by examining the data. Then, a consensus grouping was developed using cluster analysis, and the number of IMI variables to characterize the neighbourhoods was reduced by multiple discriminant function analysis. The 296 segments were reduced to a consensus set of 10 neighbourhoods, which could be separated from each other by 9 functions constructed from 24 IMI variables. Biplots of these functions were an effective means of summarizing and presenting the results of the community assessment, and stimulated community action. It is possible to use principled quantitative methods to reduce large amounts of information about the built environment into meaningful summaries. These summaries, or built environment neighbourhoods, were useful in catalyzing action with community stakeholders and led to the development of health-promoting built environment interventions.

A dynamic framework on travel mode choice focusing on utilitarian walking based on the integration of current knowledge.

PubMed

Yang, Yong

2016-09-01

Recently, research on utilitarian walking has gained momentum due to its benefits on both health and the environment. However, our overall understanding of how built and social environments affect travel mode choice (walking or not) is still limited, and most existing frameworks on travel mode choice lack dynamic processes. After a review of several mainstream theories and a number of frameworks, we propose an integrated framework. The basic constructs in the travel mode choice function are utilities, constraints, attitudes, and habits. With a hierarchical structure and heuristic rules, the travel mode choice function is modified by individual characteristics and travel characteristics. The framework explicitly presents several dynamic processes, including the perception process on the environment, attitude formation process, habit formation process, interactions among an individual's own behaviors, interactions among travelers, feedback from travel to the built and social environments, and feedback from other behaviors to the built and social environments. For utilitarian walking, the framework may contribute to the study design, data collection, adoption of new research methods, and provide indications for policy interventions.

A dynamic framework on travel mode choice focusing on utilitarian walking based on the integration of current knowledge

PubMed Central

Yang, Yong

2016-01-01

Recently, research on utilitarian walking has gained momentum due to its benefits on both health and the environment. However, our overall understanding of how built and social environments affect travel mode choice (walking or not) is still limited, and most existing frameworks on travel mode choice lack dynamic processes. After a review of several mainstream theories and a number of frameworks, we propose an integrated framework. The basic constructs in the travel mode choice function are utilities, constraints, attitudes, and habits. With a hierarchical structure and heuristic rules, the travel mode choice function is modified by individual characteristics and travel characteristics. The framework explicitly presents several dynamic processes, including the perception process on the environment, attitude formation process, habit formation process, interactions among an individual’s own behaviors, interactions among travelers, feedback from travel to the built and social environments, and feedback from other behaviors to the built and social environments. For utilitarian walking, the framework may contribute to the study design, data collection, adoption of new research methods, and provide indications for policy interventions. PMID:27747158

The construction of fertility in al-Andalus. Geoarchaeology in Ricote (Murcia, Spain, 8th century AD)

NASA Astrophysics Data System (ADS)

Puy, Arnald

2013-04-01

Traditional irrigated terraces of Spain (known as 'huertas') are among the most emblematic and productive agricultural fields of the Mediterranean. Several of these huertas were first built by Arab and Berber tribes and clans that entered the Iberian Peninsula (al-Andalus) after 711 AD, coinciding with the spread of Islam during Middle Ages (>632 AD). One thousand and three hundred years after their construction they are still operative, presenting a topic case of sustainable and resilient agricultural areas. However, up until recently no data was available regarding the pre-existing features of the terrains where they were built, the timing of their construction nor their construction process. In this communication I will present the results of the study of a palaeosoil buried under an Andalusi irrigated terrace in the huerta of Ricote (Murcia, Spain). Soil micromorphology, physico-chemical analysis (Loss On Ignition, Magnetic Susceptibility, Particle Size Distribution, pH/Electrical Conductivity) and AMS dating allowed to determine that 1) Andalusi peasants selected a highly saline Hypercalcic Calcisol to build up the first irrigated terraces; 2) They clear the slope of bushes by fire; 3) They used the slope soil to build the terrace fill, possibly by inverting the original soil horizonation, and 4) According to the date obtained from the organic matter embedded in the topmost horizon of the palaeosoil (647-778 AD), the original Andalusi irrigated fields of Ricote were possibly built shortly after 711 AD. The communication, in sum, will show through a case study how past peasant societies transformed semi-arid environments to create highly productive agrarian areas.

Assessing the impact of urban land cover composition on CO2 flux

NASA Astrophysics Data System (ADS)

Becker, K.; Hinkle, C.

2013-12-01

Urbanization is an ever increasing trend in global land use change, and has been identified as a key driver of CO2 emissions. Therefore, understanding how urbanization affects CO2 flux across a range of climatic zones and development patterns is critical to projecting the impact of future land use on CO2 flux dynamics. A growing number of studies are applying the eddy covariance method to urban areas to quantify the CO2 flux dynamics of these systems. However, interpretation of eddy covariance data in these urban systems presents a challenge, particularly in areas with high heterogeneity due to a mixing of built and green space. Here we present a study aimed at establishing a relationship between land cover composition and CO2 flux for a heterogeneous urban area of Orlando, FL. CO2 flux has been measured at this site for > 4 years using an open path eddy covariance system. Land cover at this site was classified into built and green space, and relative weight of both land covers were calculated for each 30 min CO2 flux measurement using the Schuepp model and a source area based on +/- one standard deviation of wind direction. The results of this analysis established a relationship between built land cover and CO2 flux within the measured footprint of this urban area. These results, in combination with future projected land use data, will be a valuable resource for providing insight into the impact of future urbanization on CO2 flux dynamics in this region.

Theoretical and experimental research on the phenomenon of stick-slip at traction railway vehicles

NASA Astrophysics Data System (ADS)

Sebesan, Ioan; Manea, Ion; Spiroiu, Marius Adrian; Arsene, Sorin

2018-01-01

The stick-slip phenomenon may occur when the limit adhesion force is exceeded at one of the motor axles of the vehicle. In the present paper is analysed the physical phenomenon stick-slip, the conditions for its occurrence and the mechanical model recommended for the study of the phenomenon. Regarding the experimental research, it is presented the stand built in the laboratory of the Rolling Stock Department at Politehnica University of Bucharest.

Feasibility and concept study to convert the NASA/AMES vertical motion simulator to a helicopter simulator

NASA Technical Reports Server (NTRS)

Belsterling, C. A.; Chou, R. C.; Davies, E. G.; Tsui, K. C.

1978-01-01

The conceptual design for converting the vertical motion simulator (VMS) to a multi-purpose aircraft and helicopter simulator is presented. A unique, high performance four degrees of freedom (DOF) motion system was developed to permanently replace the present six DOF synergistic system. The new four DOF system has the following outstanding features: (1) will integrate with the two large VMS translational modes and their associated subsystems; (2) can be converted from helicopter to fixed-wing aircraft simulation through software changes only; (3) interfaces with an advanced cab/visual display system of large dimensions; (4) makes maximum use of proven techniques, convenient materials and off-the-shelf components; (5) will operate within the existing building envelope without modifications; (6) can be built within the specified weight limit and avoid compromising VMS performance; (7) provides maximum performance with a minimum of power consumption; (8) simple design minimizes coupling between motions and maximizes reliability; and (9) can be built within existing budgetary figures.

MeerLICHT and BlackGEM: custom-built telescopes to detect faint optical transients

NASA Astrophysics Data System (ADS)

Bloemen, Steven; Groot, Paul; Woudt, Patrick; Klein Wolt, Marc; McBride, Vanessa; Nelemans, Gijs; Körding, Elmar; Pretorius, Margaretha L.; Roelfsema, Ronald; Bettonvil, Felix; Balster, Harry; Bakker, Roy; Dolron, Peter; van Elteren, Arjen; Elswijk, Eddy; Engels, Arno; Fender, Rob; Fokker, Marc; de Haan, Menno; Hagoort, Klaas; de Hoog, Jasper; ter Horst, Rik; van der Kevie, Giel; Kozłowski, Stanisław; Kragt, Jan; Lech, Grzegorz; Le Poole, Rudolf; Lesman, Dirk; Morren, Johan; Navarro, Ramon; Paalberends, Willem-Jelle; Paterson, Kerry; Pawłaszek, Rafal; Pessemier, Wim; Raskin, Gert; Rutten, Harrie; Scheers, Bart; Schuil, Menno; Sybilski, Piotr W.

2016-07-01

We present the MeerLICHT and BlackGEM telescopes, which are wide-field optical telescopes that are currently being built to study transient phenomena, gravitational wave counterparts and variable stars. The telescopes have 65 cm primary mirrors and a 2.7 square degree field-of-view. The MeerLICHT and BlackGEM projects have different science goals, but will use identical telescopes. The first telescope, MeerLICHT, will be commissioned at Sutherland (South Africa) in the first quarter of 2017. It will co-point with MeerKAT to collect optical data commensurate with the radio observations. After careful analysis of MeerLICHT's performance, three telescopes of the same type will be commissioned in La Silla (Chile) in 2018 to form phase I of the BlackGEM array. BlackGEM aims at detecting and characterizing optical counterparts of gravitational wave events detected by Advanced LIGO and Virgo. In this contribution we present an overview of the science goals, the design and the status of the two projects.

Learning-based position control of a closed-kinematic chain robot end-effector

NASA Technical Reports Server (NTRS)

Nguyen, Charles C.; Zhou, Zhen-Lei

1990-01-01

A trajectory control scheme whose design is based on learning theory, for a six-degree-of-freedom (DOF) robot end-effector built to study robotic assembly of NASA hardwares in space is presented. The control scheme consists of two control systems: the feedback control system and the learning control system. The feedback control system is designed using the concept of linearization about a selected operating point, and the method of pole placement so that the closed-loop linearized system is stabilized. The learning control scheme consisting of PD-type learning controllers, provides additional inputs to improve the end-effector performance after each trial. Experimental studies performed on a 2 DOF end-effector built at CUA, for three tracking cases show that actual trajectories approach desired trajectories as the number of trials increases. The tracking errors are substantially reduced after only five trials.

Young Children's Learning of Water Physics by Constructing Working Systems

ERIC Educational Resources Information Center

Levy, Sharona T.

2013-01-01

The present study explored young 5-6-year old children's design-based learning of science through building working physical systems and examined their evolving conceptions of water flow. Fifteen children in an experimental group individually built water-pipe systems during four sessions that included end-of-session interviews. In addition,…

Competences of Engineers in the Iron and Steel Industry

NASA Astrophysics Data System (ADS)

Kozhevnikov, A. V.

2017-12-01

The article presents the results of assessment of the professional performance of engineers working in the iron and steel industry. A competence-based profile of highly-qualified professionals has been built. The study of the competences of the iron and steel industry engineers has shown that their knowledge and skills may be mobilized to solve professional tasks.

Life - Past, Present and Future. Environmental Education Curriculum. Revised.

ERIC Educational Resources Information Center

Topeka Public Schools, KS.

This unit attempts to interrelate the traditional biological science studies such as food webs, population changes and ecological succession to form a coherent picture of our world today, the factors that created it and the forces that continue to change it. Designed for use in the secondary schools, it is built around nine films and has seven…

Profiling the Collocation Use in ELT Textbooks and Learner Writing

ERIC Educational Resources Information Center

Tsai, Kuei-Ju

2015-01-01

The present study investigates the collocational profiles of (1) three series of graded textbooks for English as a foreign language (EFL) commonly used in Taiwan, (2) the written productions of EFL learners, and (3) the written productions of native speakers (NS) of English. These texts were examined against a purpose-built collocation list. Based…

Comparing Elicited Imitation and Word Monitoring as Measures of Implicit Knowledge

ERIC Educational Resources Information Center

Suzuki, Yuichi; DeKeyser, Robert

2015-01-01

The present study challenges the validity of elicited imitation (EI) as a measure for implicit knowledge, investigating to what extent online error detection and subsequent sentence repetition draw on implicit knowledge. To assess online detection during listening, a word monitoring component was built into an EI task. Advanced-level Japanese L2…

Measuring Thermal Performance of Building Envelopes: Nine Case Studies,

DTIC Science & Technology

1985-03-01

inch P/B = 11.36, present worth factor for an es- of expanded polystyrene insulation) to the build- calating series for a 15-year period ing exterior...inch of The one MCA building roof we measured was a expanded polystyrene at R-3.6 per inch. Where the cathedral system with a sloped built-up roofing

Music Students' Perceptions of Experiential Learning at the Moot Audition

ERIC Educational Resources Information Center

Mitchell, Helen F.

2018-01-01

The music industry is built on a system of expert evaluation focused on sound, but the foundations are challenged by recent research, which suggests that sight trumps sound. This presents a challenge to music educators, who train the next generation of expert performers and listeners. The aim of this study is to investigate students' perceptions…

Shifting the Role: School-District Superintendents' Experiences as They Build a Learning Community

ERIC Educational Resources Information Center

Dickson, John; Mitchell, Coral

2014-01-01

This paper presents the findings of a qualitative action-research study that explored how one group of district-level school superintendents conceptualized their role as they built their own learning community. Data analysis yielded four elements that supported the participants' efforts: (a) using a process as an entry point, (b) aligning various…

Multiple serial picture presentation with millisecond resolution using a three-way LC-shutter-tachistoscope

PubMed Central

Fischmeister, Florian Ph.S.; Leodolter, Ulrich; Windischberger, Christian; Kasess, Christian H.; Schöpf, Veronika; Moser, Ewald; Bauer, Herbert

2010-01-01

Throughout recent years there has been an increasing interest in studying unconscious visual processes. Such conditions of unawareness are typically achieved by either a sufficient reduction of the stimulus presentation time or visual masking. However, there are growing concerns about the reliability of the presentation devices used. As all these devices show great variability in presentation parameters, the processing of visual stimuli becomes dependent on the display-device, e.g. minimal changes in the physical stimulus properties may have an enormous impact on stimulus processing by the sensory system and on the actual experience of the stimulus. Here we present a custom-built three-way LC-shutter-tachistoscope which allows experimental setups with both, precise and reliable stimulus delivery, and millisecond resolution. This tachistoscope consists of three LCD-projectors equipped with zoom lenses to enable stimulus presentation via a built-in mirror-system onto a back projection screen from an adjacent room. Two high-speed liquid crystal shutters are mounted serially in front of each projector to control the stimulus duration. To verify the intended properties empirically, different sequences of presentation times were performed while changes in optical power were measured using a photoreceiver. The obtained results demonstrate that interfering variabilities in stimulus parameters and stimulus rendering are markedly reduced. Together with the possibility to collect external signals and to send trigger-signals to other devices, this tachistoscope represents a highly flexible and easy to set up research tool not only for the study of unconscious processing in the brain but for vision research in general. PMID:20122963

Analysis of Latest Experience in Design of Industrial Buildings Reconstruction by Constructing Additional Interfloor Overlaps

NASA Astrophysics Data System (ADS)

Peshnina, I.; Sinitsina, O.

2017-11-01

The study relevance is determined by the increasing interest in reconstruction of city historical centers and located in the area of industrial buildings the functional profile of which needs to be changed. The problem of obtaining extra usable spaces in the historical centers of cities is solved by raising the number of storeys in the buildings which can be achieved by the construction of additional built-in inter-floor overlaps. The article is dedicated to the analysis of the recent years’ experience in reconstruction design involving this method in our country and abroad, in the Netherlands, in particular. The article presents the results of the analysis of the experience in reconstruction of the objects by constructing additional inter-floor overlaps and aims to define the optimum construction solution for built-in inter-floor overlapping and to develop non-existing solutions for wide application of this method in the reconstruction of a building with non-unified and unmodulated parameters. It was determined as expedient to apply a monolith reinforced concrete slab with the use of steel profiled flooring as a formwork and reinforcement and steel beams designed as “Built-in Beams” for the construction of built-in inter-floor overlaps in reconstruction. The article will be useful for specialists doing research in the sphere of reconstruction of the buildings and for the practical activity of design engineers.

Ultimate Strength of Ferro-Geopolymer Composite Built-Up I Joist

NASA Astrophysics Data System (ADS)

Vipin, K. T.; Ganesan, N.; Indira, P. V.

2017-07-01

An experimental study was carried out to study the behaviour of ferro-geopolymer built-up I- joist with different types of mesh reinforcements under flexure. Mesh reinforcements considered in this study are square welded meshes, square woven meshes and hexagonal meshes. First crack load as well as ultimate strength of ferro-geopolymer built-up I-joist in flexure was obtained. An attempt was made to predict the first crack load and ultimate moment capacity of the specimen.

Monitoring the expansion of built-up areas in Seberang Perai region, Penang State, Malaysia

NASA Astrophysics Data System (ADS)

Samat, N.

2014-02-01

Rapid urbanization has caused land use transformation and encroachment of built environment into arable agriculture land. Uncontrolled expansion could bring negative impacts to society, space and the environment. Therefore, information on expansion and future spatial pattern of built-up areas would be useful for planners and decision makers in formulating policies towards managing and planning for sustainable urban development. This study demonstrates the usage of Geographic Information System in monitoring the expansion of built-up area in Seberang Perai region, Penang State, Malaysia. Built-up area has increased by approximately 20% between 1990 and 2001 and further increased by 12% between 2001 and 2007. New development is expected to continue encroach into existing open space and agriculture area since those are the only available land in this study area. The information on statistics of the expansion of built-up area and future spatial pattern of urban expansion were useful in planning and managing urban spatial growth.

Quantifying annual changes in built-up area in complex urban-rural landscapes from analyses of PALSAR and Landsat images

NASA Astrophysics Data System (ADS)

Qin, Yuanwei; Xiao, Xiangming; Dong, Jinwei; Chen, Bangqian; Liu, Fang; Zhang, Geli; Zhang, Yao; Wang, Jie; Wu, Xiaocui

2017-02-01

Built-up area supports human settlements and activities, and its spatial distribution and temporal dynamics have significant impacts on ecosystem services and global environment change. To date, most of urban remote sensing has generated the maps of impervious surfaces, and limited effort has been made to explicitly identify the area, location and density of built-up in the complex and fragmented landscapes based on the freely available datasets. In this study, we took the lower Yangtze River Delta (Landsat Path/Row: 118/038), China, where extensive urbanization and industrialization have occurred, as a case study site. We analyzed the structure and optical features of typical land cover types from (1) the HH and HV gamma-naught imagery from the Advanced Land Observation Satellite (ALOS) Phased Array type L-band Synthetic Aperture Radar (PALSAR), and (2) time series Landsat imagery. We proposed a pixel- and rule-based decision tree approach to identify and map built-up area at 30-m resolution from 2007 to 2010, using PALSAR HH gamma-naught and Landsat annual maximum Normalized Difference Vegetation Index (NDVImax). The accuracy assessment showed that the resultant annual maps of built-up had relatively high user (87-93%) and producer accuracies (91-95%) from 2007 to 2010. The built-up area was 2805 km2 in 2010, about 16% of the total land area of the study site. The annual maps of built-up in 2007-2010 show relatively small changes in the urban core regions, but large outward expansion along the peri-urban regions. The average annual increase of built-up areas was about 80 km2 per year from 2007 to 2010. Our annual maps of built-up in the lower Yangtze River Delta clearly complement the existing maps of impervious surfaces in the region. This study provides a promising new approach to identify and map built-up area, which is critical to investigate the interactions between human activities and ecosystem services in urban-rural systems.

The built environment moderates effects of family-based childhood obesity treatment over 2 years.

PubMed

Epstein, Leonard H; Raja, Samina; Daniel, Tinuke Oluyomi; Paluch, Rocco A; Wilfley, Denise E; Saelens, Brian E; Roemmich, James N

2012-10-01

Research suggests the neighborhood built environment is related to child physical activity and eating. The purpose of this study was to determine if characteristics of the neighborhood environment moderate the relationship between obesity treatment and weight loss, and if outcomes of particular treatments are moderated by built environment characteristics. The relationship between the built environment and standardized BMI (zBMI) changes for 191 8-12-year-old children who participated in one of four randomized, controlled trials of pediatric weight management was assessed using mixed models analysis of covariance. At 2-year follow-up, greater parkland, fewer convenience stores, and fewer supermarkets were associated with greater zBMI reduction across all interventions. No treatments interacted with characteristics of the built environment. Activity- and eating-related built neighborhood characteristics are associated with child success in behavioral obesity treatments. Efficacy may be improved by individualizing treatments based on built environment characteristics.

ISAAC Advanced Composites Research Testbed

NASA Technical Reports Server (NTRS)

Wu, K. Chauncey; Stewart, Brian K.; Martin, Robert A.

2014-01-01

The NASA Langley Research Center is acquiring a state-of-art composites fabrication capability to support the Center's advanced research and technology mission. The system introduced in this paper is named ISAAC (Integrated Structural Assembly of Advanced Composites). The initial operational capability of ISAAC is automated fiber placement, built around a commercial system from Electroimpact, Inc. that consists of a multi-degree of freedom robot platform, a tool changer mechanism, and a purpose-built fiber placement end effector. Examples are presented of the advanced materials, structures, structural concepts, fabrication processes and technology development that may be enabled using the ISAAC system. The fiber placement end effector may be used directly or with appropriate modifications for these studies, or other end effectors with different capabilities may either be bought or developed with NASA's partners in industry and academia.

Single room occupancy (SRO) hotels as mental health risk environments among impoverished women: the intersection of policy, drug use, trauma, and urban space.

PubMed

Knight, Kelly R; Lopez, Andrea M; Comfort, Megan; Shumway, Martha; Cohen, Jennifer; Riley, Elise D

2014-05-01

Due to the significantly high levels of comorbid substance use and mental health diagnosis among urban poor populations, examining the intersection of drug policy and place requires a consideration of the role of housing in drug user mental health. In San Francisco, geographic boundedness and progressive health and housing polices have coalesced to make single room occupancy hotels (SROs) a key urban built environment used to house poor populations with co-occurring drug use and mental health issues. Unstably housed women who use illicit drugs have high rates of lifetime and current trauma, which manifests in disproportionately high rates of post-traumatic stress disorder (PTSD), anxiety, and depression when compared to stably housed women. We report data from a qualitative interview study (n=30) and four years of ethnography conducted with housing policy makers and unstably housed women who use drugs and live in SROs. Women in the study lived in a range of SRO built environments, from publicly funded, newly built SROs to privately owned, dilapidated buildings, which presented a rich opportunity for ethnographic comparison. Applying Rhodes et al.'s framework of socio-structural vulnerability, we explore how SROs can operate as "mental health risk environments" in which macro-structural factors (housing policies shaping the built environment) interact with meso-level factors (social relations within SROs) and micro-level, behavioral coping strategies to impact women's mental health. The degree to which SRO built environments were "trauma-sensitive" at the macro level significantly influenced women's mental health at meso- and micro-levels. Women who were living in SROs which exacerbated fear and anxiety attempted, with limited success, to deploy strategies on the meso- and micro-level to manage their mental health symptoms. Study findings underscore the importance of housing polices which consider substance use in the context of current and cumulative trauma experiences in order to improve quality of life and mental health for unstably housed women. Copyright © 2013 Elsevier B.V. All rights reserved.

Single Room Occupancy (SRO) hotels as mental health risk environments among impoverished women: the intersection of policy, drug use, trauma, and urban space

PubMed Central

Knight, Knight R.; Lopez, Andrea M.; Comfort, Megan; Shumway, Martha; Cohen, Jennifer; Riley, Elise

2014-01-01

Due to the significantly high levels of comorbid substance use and mental health diagnosis among urban poor populations, examining the intersection of drug policy and place requires a consideration of the role of housing in drug user mental health. In San Francisco, geographic boundedness and progressive health and housing polices have coalesced to make single room occupancy hotels (SROs) a key urban built environment used to house poor populations with co-occurring drug use and mental health issues. Unstably housed women who use illicit drugs have high rates of lifetime and current trauma, which manifests in disproportionately high rates of post-traumatic stress disorder (PTSD), anxiety, and depression when compared to stably housed women. We report data from a qualitative interview study (n=30) and four years of ethnography conducted with housing policy makers and unstably housed women who use drugs and live in SROs. Women in the study lived in a range of SRO built environments, from publicly-funded, newly built SROs to privately-owned, dilapidated buildings, which presented a rich opportunity for ethnographic comparison. Applying Rhodes et al.’s framework of socio-structural vulnerability, we explore how SROs can operate as “mental health risk environments” in which macro-structural factors (housing policies shaping the built environment) interact with meso-level factors (social relations within SROs) and micro-level, behavioral coping strategies to impact women’s mental health. The degree to which SRO built environments were “trauma-sensitive” at the macro level significantly influenced women’s mental health at meso- and micro- levels. Women who were living in SROs which exacerbated fear and anxiety attempted, with limited success, to deploy strategies on the meso- and micro- level to manage their mental health symptoms. Study findings underscore the importance of housing polices which consider substance use in the context of current and cumulative trauma experiences in order to improve quality of life and mental health for unstably housed women. PMID:24411945

Built Environment Education in Art Education.

ERIC Educational Resources Information Center

Guilfoil, Joanne K., Ed.; Sandler, Alan R., Ed.

This anthology brings the study of the built environment, its design, social and cultural functions, and the criticism thereof into focus. Following a preface and introduction, 22 essays are organized in three parts. Part 1 includes: (1) "Landscape Art and the Role of the Natural Environment in Built Environment Education" (Heather…

Compact development and VMT: environmental determinism, self-selection, or some of both?

USGS Publications Warehouse

Ewing, Reid; Hamidi, Shima; Grace, James B.

2016-01-01

There is a long-running debate in the planning literature about the effects of the built environment on travel behavior and the degree to which apparent effects are due to the tendency of households to self-select into neighborhoods that reinforce their travel preferences. Those who want to walk will choose walkable neighborhoods, and those who want to use transit will choose transit-served neighborhoods. These households might have walked or used transit more than their neighbors wherever they lived. Most previous studies have shown that individual attitudes attenuate the relationship between the residential environment and travel choices, and so the effect of the built environment on travel may be overestimated. But there are other researchers who argue the reverse, claiming that residential preferences reinforce built environmental influences. This study assesses the relative importance of the built environment and residential preferences/travel attitudes for a sample of 962 households in the Greater Salt Lake region using structural equation modeling. For the sake of simplicity, we extracted two factors using principal component analysis, one representing the built environment and the other representing residential preferences/attitudes. Our findings are consistent with the view that the neighborhood built environment and residential preferences both influence household’s travel, that the built environment is the stronger influence, and that the built environment affects travel through two causal pathways, one direct and the other indirect, through attitudes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stanislavskii, L.Ya.

Large turbogenerators with built-up rotor designs operating in U.S.S.R. power plants were studied to obtain data on reliability, failures, and performance characteristics for normal and abnormal operating conditions. Data for 23 turbogenerators manufactured by domestic and foreign firms were analyzed. The studies showed that the reliability factor of the joints of built-up rotors should be equal to approximately 6 to provide a monolithic built-up rotor. At lower built-up rotor joint reliability factors, weakening of the joints occurred during their operation, leading to extreme generator vibration, damage to the insulating sockets at the joint, burning of the joints and sometimes breakagemore » of the screws holding the joints. When it is necessary to restore the monolithic nature of the joints of a rotor its design should permit replacement of the tightening devices (tie rods, screws). If this is not possible the built-up rotor becomes unsuitable for operation. During abnormal conditions there are maximum temperatures in the joint of a built-up rotor about 50 percent greater than in the end part of the rotor. Thus special structural measures are necessary to improve the electrical contact in the joints of the built-up parts of the rotors of large turbogenerators. In all cases where they are not dictated by construction requirements (supercooled turbogenerators), the use of built-up rotors is unfavorable. (LCL)« less

High-frequency trigger generators for CuBr-laser high voltage pumping source

NASA Astrophysics Data System (ADS)

Torgaev, S.; Kozhemyak, O.; Yaroslavtsev, E.; Trigub, M.; Musorov, I.; Chertikhina, D.

2016-04-01

In this paper the circuits of high frequency trigger generators of pulses of the nanosecond duration are presented. A detailed study of a generator based on the avalanche transistor with the use of a coaxial cable instead of a capacitor is described. This circuit showed advanced characteristics of the output pulses. A circuit of a generator built on high-speed digital components is also considered. The basic advantages and disadvantages of both generators are presented in this paper.

Analysis of Energy Consumption and Possibilities of Thermal-Modernization in Residential Buildings in Poland Case Study: The Town of Zielona Góra

NASA Astrophysics Data System (ADS)

Alsabry, A.; Truszkiewicz, P.; Szymański, K.; Łaskawiec, K.; Rojek, Ł.

2017-12-01

The article presents an analysis of buildings belonging the Department of Public Utilities and Housing in Zielona Góra. The research was based on a set of questions for building operators. The questionnaires consisted of 30 questions concerning general and detailed information about the buildings. In order to clearly present the results, this article includes data only about residential and residential-commercial buildings. Forty building built in different periods were selected for analysis.

Carbon dioxide reduction by the Bosch process

NASA Technical Reports Server (NTRS)

Manning, M. P.; Reid, R. C.

1975-01-01

Prototype units for carrying out the reduction of carbon dioxide to elementary carbon have been built and operated successfully. In some cases, however, startup difficulties have been reported. Moreover, the recycle reactor product has been reported to contain only small amounts of water and undesirably high yields of methane. This paper presents the results of the first phase of an experimental study that was carried out to define the mechanisms occurring in the reduction process. Conclusions are drawn and possible modifications to the present recycle process are suggested.

[Assessment of land use environmental impacts in urban built-up area: a case study in main built-up area of Nanchang City].

PubMed

Chen, Wen-Bo; Liu, Shi-Yu; Yu, Dun; Zou, Qiu-Ming

2009-07-01

Based on the relevant studies of land use environmental impacts and the characteristics of urban land use, a conceptual model on the assessment of land use environmental impacts in urban built-up area was established. This model grouped the land use environmental impacts in built-up area into four basic processes, i. e., detailization, abstractization, matching, and evaluation. A case study was conducted in the main built-up area of Nanchang City, with noise, smell, dust, and hazard as the impact factors. In the test area, noise had a widespread impact, its impacting area accounting for 59% of the total, smell and dust impacts centralized in the east and south parts, while hazard impact was centralized in the southeast part, an industrial area. This assessment model of four basic processes was practical, and could provide basis for the decision-making of urban land use management and planning.

Effective use of the built environment to manage behavioural and psychological symptoms of dementia: a systematic review.

PubMed

Soril, Lesley J J; Leggett, Laura E; Lorenzetti, Diane L; Silvius, James; Robertson, Duncan; Mansell, Lynne; Holroyd-Leduc, Jayna; Noseworthy, Tom W; Clement, Fiona M

2014-01-01

To determine the effectiveness of built environment interventions in managing behavioural and psychological symptoms of dementia (BPSD) among residents in long-term care settings. Systematic review of literature published from 1995-2013. Studies were included if they: were randomized controlled trials, quasi-experimental trials, or comparative cohort studies; were in long-term or specialized dementia care; included residents with dementia and BPSD; and examined effectiveness of a built environment intervention on frequency and/or severity of BPSD. Quality of included studies was assessed using the Downs and Black Checklist. Study design, patient population, intervention, and outcomes were extracted and narratively synthesized. Five low to moderate quality studies were included. Three categories of interventions were identified: change/redesign of existing physical space, addition of physical objects to environment, and type of living environment. One of the two studies that examined change/redesign of physical spaces reported improvements in BPSD. The addition of physical objects to an existing environment (n = 1) resulted in no difference in BPSD between treatment and control groups. The two studies that examined relocation to a novel living environment reported decreased or no difference in the severity and/or frequency of BPSD post-intervention. No studies reported worsening of BPSD following a built environment intervention. The range of built environment interventions is broad, as is the complex and multi-dimensional nature of BPSD. There is inconclusive evidence to suggest a built environment intervention which is clinically superior in long-term care settings. Further high-quality methodological and experimental studies are required to demonstrate the feasibility and effectiveness of such interventions.

Built-In-Test Equipment Requirements Workshop. Workshop Presentation

DTIC Science & Technology

1981-08-01

quantitatively evaluated in test. (2) It is necessary to develop the statistical methods that should be used for predicting and confirming of diagnostic...of different performance levels of BIT peacetime and wartime applications, and the corresponding manpower and other support requirements should be...reports. The scope of the workshop involves the areas of require- ments for built-in-test and diagnostics, and the methods of testing to ensure that the

Impact factors on expansion of built-up areas in Zhejiang Province, China

NASA Astrophysics Data System (ADS)

Liu, Dong; Zhu, Qiankun; Li, Yan; Gong, Fang

2017-10-01

Built-up areas are the results of human activities. Not only are they the real reflection of human and society activities, but also one of the most important input parameters for the simulation of biogeochemical cycle. Therefore, it is very necessary to map the distribution of built-up areas and monitor their changes by using new technologies and methods at high spatiotemporal resolution. By combining technologies of GIS (Geographic Information System) and RS (Remote Sensing), this study mainly explored the expansion and driving factors of built-up areas at the beginning of the 21st century in Zhejiang Province, China. Firstly, it introduced the mapping processes of LULC (Land Use and Land Cover) based on the method which combined object-oriented method and binary decision tree. Then, it analyzed the expansion features of built-up areas in Zhejiang from 2000 to 2005 and 2005 to 2010. In addition to these, potential driving factors on the expansion of built-up areas were also explored, which contained physical geographical factors, railways, highways, rivers, urban centers, elevation, and slop. Results revealed that the expansions of built-up areas in Zhejiang from 2000 to 2005 and from 2005 to 2010 were very obvious and they showed high levels of variation in spatial heterogeneity. Except those, increased built-up areas with distance to railways, highways, rivers, and urban centers could be fitted with power function (y = a*xb ), with minimum R2 of 0.9507 for urban centers from 2000 to 2005; the increased permillages of built-up areas to mean elevation and mean slop could be fitted with exponential functions (y = a*ebx), with minimum R2 of 0.6657 for mean slop from 2005 to 2010. Besides, government policy could also impact expansion of built-up areas. In a nutshell, a series of conclusions were obtained through this study about the spatial features and driving factors of evolution of built-up areas in Zhejiang from 2000 to 2010.

The Search for an Explanation: Breast Cancer in the Context of Genetic Inheritance

ERIC Educational Resources Information Center

Maheu, Christine

2009-01-01

This case study is an in-depth examination of how Erika (a pseudonym) interpreted and understood her genetic test results for breast cancer susceptibility. Her experience is presented in the form of a biography, which was built from key passages retrieved from the semi structured interview the author conducted at Erika's home. The interview data…

Child Factors Associated with Enrollment in Part C Early Intervention among Children Adopted from China

ERIC Educational Resources Information Center

Bruder, Mary Beth; Dunst, Carl J.; Mogro-Wilson, Cristina

2009-01-01

The provision of services under Part C of the Individuals With Disabilities Education Act is built on a premise that children benefit from early intervention. This article presents findings from a study of children adopted from China. Given information obtained from a survey, the researchers grouped children as (a) those who received early…

Request for OMB Clearance with Supporting Documents for the Evaluation of the State Capacity Building Program in Dissemination. Revised.

ERIC Educational Resources Information Center

NTS Research Corp., Durham, NC.

This document presents the research proposal and supporting documents for a study to evaluate the process of developing a comprehensive dissemination capacity in State Education Agencies (SEAs) and to assess the impact of the capacity building activities in the states, addressing two questions: Is dissemination capacity being built and, if so,…

Primary School Teachers' Practices and Troubles with the Students Who They Think Have Undiagnosed Difficulties in Verbal Communication, Reading and Writing

ERIC Educational Resources Information Center

Ergen, Yusuf; Elma, Cevat

2018-01-01

The primary school Turkish program was basically built on three learning domains. These are the learning domains of verbal communication, reading and writing. The purpose of the present study is to determine primary school teachers' practices and difficulties related to students considered to have undiognosed verbal communication, reading and…

Computer-Assisted Instruction in the Basic Public Speaking Course: Issues of Development and Implementation.

ERIC Educational Resources Information Center

Vest, David; Tajchman, Ron

A study explained the manner in which a computer-assisted tutorial was built and assessed the utility of the courseware. The tutorial was designed to demonstrate the efficacy of good organization in informing the audience about a topic and provide appropriate models for the presentation of the well-organized informative speech. The topic of the…

Perceptual Modification of the Built Environment to Influence Behavior Associated with Physical Activity: Quasi-Experimental Field Studies of a Stair Banister Illusion.

PubMed

Masters, Rich; Capio, Catherine; Poolton, Jamie; Uiga, Liis

2018-06-01

Re-engineering the built environment to influence behaviors associated with physical activity potentially provides an opportunity to promote healthier lifestyles at a population level. Here we present evidence from two quasi-experimental field studies in which we tested a novel, yet deceptively simple, intervention designed to alter perception of, and walking behavior associated with, stairs in an urban area. Our objectives were to examine whether adjusting a stair banister has an influence on perceptions of stair steepness or on walking behavior when approaching the stairs. In study 1, we asked participants (n = 143) to visually estimate the steepness of a set of stairs viewed from the top, when the stair banister was adjusted so that it converged with or diverged from the stairs (± 1.91°) or remained neutral (± 0°). In study 2, the walking behavior of participants (n = 36) was filmed as they approached the stairs to descend, unaware of whether the banister converged, diverged, or was neutral. In study 1, participants estimated the stairs to be steeper if the banister diverged from, rather than converged with, the stairs. The effect was greater when participants were unaware of the adjustment. In study 2, walking speed was significantly slower when the banister diverged from, rather than converged with, the stairs. These findings encourage us to speculate about the potential to economically re-engineer features of the built environment to provide opportunities for action (affordances) that invite physical activity behavior or even promote safer navigation of the environment.

Does the built environment moderate the relationship between having a disability and lower levels of physical activity? A systematic review.

PubMed

Eisenberg, Yochai; Vanderbom, Kerri A; Vasudevan, Vijay

2017-02-01

The relationship between the built environment and physical activity has been well documented. However, little is known about how the built environment affects physical activity among people with disabilities, who have disproportionately higher rates of physical inactivity and obesity. This study is the first systematic review to examine the role of the built environment as a moderator of the relationship between having a disability (physical, sensory or cognitive) and lower levels of physical activity. After conducting an extensive search of the literature published between 1990 and 2015, 2039 articles were screened, 126 were evaluated by abstract and 66 by full text for eligibility in the review. Data were abstracted using a predefined coding guide and synthesized from both qualitative and quantitative studies to examine evidence of moderation. Nine quantitative and six qualitative articles met the inclusion criteria. Results showed that most research to date has been on older adults with physical disabilities. People with disabilities described how aspects of the built environment affect neighborhood walking, suggesting a positive moderating role of features related to safety and aesthetic qualities, such as benches, lighting and stop light timing. There were mixed results among studies that examined the relationship quantitatively. Most of the studies were not designed to appropriately examine moderation. Future research should utilize valid and reliable built environment measures that are more specific to disability and should include people with and without disabilities to allow for testing of moderation of the built environment. Copyright © 2016 Elsevier Inc. All rights reserved.

The Impact of Built Environment on Diabetic Patients: The Case of Eastern Province, Kingdom of Saudi Arabia

PubMed Central

Sidawi, Bhzad; Al-Hariri, Mohamed Taha Ali

2012-01-01

At present, Diabetes mellitus is considered as one of the main threats to the human health in the 21st century. It may lead to severe conditions such as blindness, end-stage of renal disease, limb amputation and a variety of debilitating neuropathies. Previous researches indicated that diabetes is caused by a complex interaction of patient’s genetics, life-style and environmental factors. They also highlighted that providing quality and healthy built environment to citizens including diabetic patients would prevent poor and unhealthy condition. The Kingdom of Saudi Arabia (KSA) is one of top ten countries in the prevalence of diabetes. Little researches though were conducted in KSA in regards to the effect of environmental conditions of the built environment. In 2011, the present researchers have carried out a pilot survey on a number of diabetic patients to find out the possible impact of built environment settings on the patient’s lifestyle. The research explored whether diabetic patients use smart tools in their daily life to overcome the daily life’s difficulties and perform their life as normal as possible. The results showed a close link between a poor home and environmental settings, the patient’s lifestyle, and the patient’s health status. It also highlighted the absence of smart tools and systems use. The paper argues that certain changes to the built environment must be done and to provide a healthy and safe environment for diabetic patients. This would help these patients to abandon their bad habits and adopt healthier lifestyle. PMID:22980349

The impact of built environment on diabetic patients: the case of Eastern Province, KIngdom of Saudi Arabia.

PubMed

Sidawi, Bhzad; Al-Hariri, Mohamed Taha Ali

2012-06-13

At present, Diabetes mellitus is considered as one of the main threats to the human health in the 21st century. It may lead to severe conditions such as blindness, end-stage of renal disease, limb amputation and a variety of debilitating neuropathies. Previous researches indicated that diabetes is caused by a complex interaction of patient's genetics, life-style and environmental factors. They also highlighted that providing quality and healthy built environment to citizens including diabetic patients would prevent poor and unhealthy condition. The Kingdom of Saudi Arabia (KSA) is one of top ten countries in the prevalence of diabetes. Little researches though were conducted in KSA in regards to the effect of environmental conditions of the built environment. In 2011, the present researchers have carried out a pilot survey on a number of diabetic patients to find out the possible impact of built environment settings on the patient's lifestyle. The research explored whether diabetic patients use smart tools in their daily life to overcome the daily life's difficulties and perform their life as normal as possible. The results showed a close link between a poor home and environmental settings, the patient's lifestyle, and the patient's health status. It also highlighted the absence of smart tools and systems use. The paper argues that certain changes to the built environment must be done and to provide a healthy and safe environment for diabetic patients. This would help these patients to abandon their bad habits and adopt healthier lifestyle.

Exploring the Use of Discrete Gestures for Authentication

NASA Astrophysics Data System (ADS)

Chong, Ming Ki; Marsden, Gary

Research in user authentication has been a growing field in HCI. Previous studies have shown that peoples’ graphical memory can be used to increase password memorability. On the other hand, with the increasing number of devices with built-in motion sensors, kinesthetic memory (or muscle memory) can also be exploited for authentication. This paper presents a novel knowledge-based authentication scheme, called gesture password, which uses discrete gestures as password elements. The research presents a study of multiple password retention using PINs and gesture passwords. The study reports that although participants could use kinesthetic memory to remember gesture passwords, retention of PINs is far superior to retention of gesture passwords.

Built Environment and Active Transport to School (BEATS) Study: protocol for a cross-sectional study.

PubMed

Mandic, Sandra; Williams, John; Moore, Antoni; Hopkins, Debbie; Flaherty, Charlotte; Wilson, Gordon; García Bengoechea, Enrique; Spence, John C

2016-05-24

Active transport to school (ATS) is a convenient way to increase physical activity and undertake an environmentally sustainable travel practice. The Built Environment and Active Transport to School (BEATS) Study examines ATS in adolescents in Dunedin, New Zealand, using ecological models for active transport that account for individual, social, environmental and policy factors. The study objectives are to: (1) understand the reasons behind adolescents and their parents' choice of transport mode to school; (2) examine the interaction between the transport choices, built environment, physical activity and weight status in adolescents; and (3) identify policies that promote or hinder ATS in adolescents. The study will use a mixed-method approach incorporating both quantitative (surveys, anthropometry, accelerometers, Geographic Information System (GIS) analysis, mapping) and qualitative methods (focus groups, interviews) to gather data from students, parents, teachers and school principals. The core data will include accelerometer-measured physical activity, anthropometry, GIS measures of the built environment and the use of maps indicating route to school (students)/work (parents) and perceived safe/unsafe areas along the route. To provide comprehensive data for understanding how to change the infrastructure to support ATS, the study will also examine complementary variables such as individual, family and social factors, including student and parental perceptions of walking and cycling to school, parental perceptions of different modes of transport to school, perceptions of the neighbourhood environment, route to school (students)/work (parents), perceptions of driving, use of information communication technology, reasons for choosing a particular school and student and parental physical activity habits, screen time and weight status. The study has achieved a 100% school recruitment rate (12 secondary schools). The study has been approved by the University of Otago Ethics Committee. The results will be actively disseminated through reports and presentations to stakeholders, symposiums and scientific publications. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Sexually selected nest-building--Pomatoschistus minutus males build smaller nest-openings in the presence of sneaker males.

PubMed

Svensson, O; Kvarnemo, C

2003-09-01

Both natural selection and sexual selection may act on nest-building. We tested experimentally how different regimes of egg-predation and male-male competition influence nest-building before mating, using the marine fish sand goby, Pomatoschistus minutus. Males with sneaker males present built the smallest nest-openings, smaller than males held alone or with Pomatoschistus microps males (which may predate eggs and compete over nest-sites but not compete over fertilizations). Males with visual access to other nest-building males tended also to build smaller openings than males held alone or with P. microps. Males with egg-predators present built nests with openings not differing significantly from any other treatment. Our results indicate that the small nest-openings found in the sneaker male treatment are sexually selected through protection against sneaking or by female choice. Across treatments, time span before a male started to build his nest also explained variation in nest-opening width; males starting late built larger nest-openings.

Performance Analysis and Parametric Study of a Natural Convection Solar Air Heater With In-built Oil Storage

NASA Astrophysics Data System (ADS)

Dhote, Yogesh; Thombre, Shashikant

2016-10-01

This paper presents the thermal performance of the proposed double flow natural convection solar air heater with in-built liquid (oil) sensible heat storage. Unused engine oil was used as thermal energy storage medium due to its good heat retaining capacity even at high temperatures without evaporation. The performance evaluation was carried out for a day of the month March for the climatic conditions of Nagpur (India). A self reliant computational model was developed using computational tool as C++. The program developed was self reliant and compute the performance parameters for any day of the year and would be used for major cities in India. The effect of change in storage oil quantity and the inclination (tilt angle) on the overall efficiency of the solar air heater was studied. The performance was tested initially at different storage oil quantities as 25, 50, 75 and 100 l for a plate spacing of 0.04 m with an inclination of 36o. It has been found that the solar air heater gives the best performance at a storage oil quantity of 50 l. The performance of the proposed solar air heater is further tested for various combinations of storage oil quantity (50, 75 and 100 l) and the inclination (0o, 15o, 30o, 45o, 60o, 75o, 90o). It has been found that the proposed solar air heater with in-built oil storage shows its best performance for the combination of 50 l storage oil quantity and 60o inclination. Finally the results of the parametric study was also presented in the form of graphs carried out for a fixed storage oil quantity of 25 l, plate spacing of 0.03 m and at an inclination of 36o to study the behaviour of various heat transfer and fluid flow parameters of the solar air heater.

Webcams, Crowdsourcing, and Enhanced Crosswalks: Developing a Novel Method to Analyze Active Transportation.

PubMed

Hipp, J Aaron; Manteiga, Alicia; Burgess, Amanda; Stylianou, Abby; Pless, Robert

2016-01-01

Active transportation opportunities and infrastructure are an important component of a community's design, livability, and health. Features of the built environment influence active transportation, but objective study of the natural experiment effects of built environment improvements on active transportation is challenging. The purpose of this study was to develop and present a novel method of active transportation research using webcams and crowdsourcing, and to determine if crosswalk enhancement was associated with changes in active transportation rates, including across a variety of weather conditions. The 20,529 publicly available webcam images from two street intersections in Washington, DC, USA were used to examine the impact of an improved crosswalk on active transportation. A crowdsource, Amazon Mechanical Turk, annotated image data. Temperature data were collected from the National Oceanic and Atmospheric Administration, and precipitation data were annotated from images by trained research assistants. Summary analyses demonstrated slight, bi-directional differences in the percent of images with pedestrians and bicyclists captured before and after the enhancement of the crosswalks. Chi-square analyses revealed these changes were not significant. In general, pedestrian presence increased in images captured during moderate temperatures compared to images captured during hot or cold temperatures. Chi-square analyses indicated the crosswalk improvement may have encouraged walking and biking in uncomfortable outdoor conditions (P < 0.5). The methods employed provide an objective, cost-effective alternative to traditional means of examining the effects of built environment changes on active transportation. The use of webcams to collect active transportation data has applications for community policymakers, planners, and health professionals. Future research will work to validate this method in a variety of settings as well as across different built environment and community policy initiatives.

FPGA implementation of bit controller in double-tick architecture

NASA Astrophysics Data System (ADS)

Kobylecki, Michał; Kania, Dariusz

2017-11-01

This paper presents a comparison of the two original architectures of programmable bit controllers built on FPGAs. Programmable Logic Controllers (which include, among other things programmable bit controllers) built on FPGAs provide a efficient alternative to the controllers based on microprocessors which are expensive and often too slow. The presented and compared methods allow for the efficient implementation of any bit control algorithm written in Ladder Diagram language into the programmable logic system in accordance with IEC61131-3. In both cases, we have compared the effect of the applied architecture on the performance of executing the same bit control program in relation to its own size.

Built environment change and change in BMI and waist circumference: Multi-ethnic Study of Atherosclerosis.

PubMed

Hirsch, Jana A; Moore, Kari A; Barrientos-Gutierrez, Tonatiuh; Brines, Shannon J; Zagorski, Melissa A; Rodriguez, Daniel A; Diez Roux, Ana V

2014-11-01

To examine longitudinal associations of the neighborhood built environment with objectively measured body mass index (BMI) and waist circumference (WC) in a geographically and racial/ethnically diverse group of adults. This study used data from 5,506 adult participants in the Multi-Ethnic Study of Atherosclerosis, aged 45-84 years in 2000 (baseline). BMI and WC were assessed at baseline and four follow-up visits (median follow-up 9.1 years). Time-varying built environment measures (population density, land-use, destinations, bus access, and street characteristics) were created using Geographic Information Systems. Principal components analysis was used to derive composite scores for three built environment factors. Fixed-effects models, tightly controlling for all time-invariant characteristics, estimated associations between change in the built environment, and change in BMI and WC. Increases in the intensity of development (higher density of walking destinations and population density, and lower percent residential) were associated with less pronounced increases or decreases over time in BMI and WC. Changes in connected retail centers (higher percent retail, higher street connectivity) and public transportation (distance to bus) were not associated with changes in BMI or WC. Longitudinal changes in the built environment, particularly increased density, are associated with decreases in BMI and WC. © 2014 The Obesity Society.

Do Natural Experiments of Changes in Neighborhood Built Environment Impact Physical Activity and Diet? A Systematic Review

PubMed Central

George, Emma S.; Feng, Xiaoqi; Merom, Dafna; Bennie, Andrew; Cook, Amelia; Dwyer, Genevieve; Pang, Bonnie; Astell-Burt, Thomas

2018-01-01

Physical activity and diet are major modifiable risk factors for chronic disease and have been shown to be associated with neighborhood built environment. Systematic review evidence from longitudinal studies on the impact of changing the built environment on physical activity and diet is currently lacking. A systematic review of natural experiments of neighborhood built environment was conducted. The aims of this systematic review were to summarize study characteristics, study quality, and impact of changes in neighborhood built environment on physical activity and diet outcomes among residents. Natural experiments of neighborhood built environment change, exploring longitudinal impacts on physical activity and/or diet in residents, were included. From five electronic databases, 2084 references were identified. A narrative synthesis was conducted, considering results in relation to study quality. Nineteen papers, reporting on 15 different exposures met inclusion criteria. Four studies included a comparison group and 11 were pre-post/longitudinal studies without a comparison group. Studies reported on the impact of redeveloping or introducing cycle and/or walking trails (n = 5), rail stops/lines (n = 4), supermarkets and farmers’ markets (n = 4) and park and green space (n = 2). Eight/15 studies reported at least one beneficial change in physical activity, diet or another associated health outcome. Due to limitations in study design and reporting, as well as the wide array of outcome measures reported, drawing conclusions to inform policy was challenging. Future research should consider a consistent approach to measure the same outcomes (e.g., using measurement methods that collect comparable physical activity and diet outcome data), to allow for pooled analyses. Additionally, including comparison groups wherever possible and ensuring high quality reporting is essential. PMID:29373567

Do Natural Experiments of Changes in Neighborhood Built Environment Impact Physical Activity and Diet? A Systematic Review.

PubMed

MacMillan, Freya; George, Emma S; Feng, Xiaoqi; Merom, Dafna; Bennie, Andrew; Cook, Amelia; Sanders, Taren; Dwyer, Genevieve; Pang, Bonnie; Guagliano, Justin M; Kolt, Gregory S; Astell-Burt, Thomas

2018-01-26

Physical activity and diet are major modifiable risk factors for chronic disease and have been shown to be associated with neighborhood built environment. Systematic review evidence from longitudinal studies on the impact of changing the built environment on physical activity and diet is currently lacking. A systematic review of natural experiments of neighborhood built environment was conducted. The aims of this systematic review were to summarize study characteristics, study quality, and impact of changes in neighborhood built environment on physical activity and diet outcomes among residents. Natural experiments of neighborhood built environment change, exploring longitudinal impacts on physical activity and/or diet in residents, were included. From five electronic databases, 2084 references were identified. A narrative synthesis was conducted, considering results in relation to study quality. Nineteen papers, reporting on 15 different exposures met inclusion criteria. Four studies included a comparison group and 11 were pre-post/longitudinal studies without a comparison group. Studies reported on the impact of redeveloping or introducing cycle and/or walking trails ( n = 5), rail stops/lines ( n = 4), supermarkets and farmers' markets ( n = 4) and park and green space ( n = 2). Eight/15 studies reported at least one beneficial change in physical activity, diet or another associated health outcome. Due to limitations in study design and reporting, as well as the wide array of outcome measures reported, drawing conclusions to inform policy was challenging. Future research should consider a consistent approach to measure the same outcomes (e.g., using measurement methods that collect comparable physical activity and diet outcome data), to allow for pooled analyses. Additionally, including comparison groups wherever possible and ensuring high quality reporting is essential.

The Tunnels of Samos

NASA Technical Reports Server (NTRS)

Apostol, Tom M. (Editor)

1995-01-01

This 'Project Mathematics' series video from CalTech presents the tunnel of Samos, a famous underground aquaduct tunnel located near the capital of Pithagorion (named after the famed Greek mathematician, Pythagoras, who lived there), on one of the Greek islands. This tunnel was constructed around 600 BC by King Samos and was built under a nearby mountain. Through film footage and computer animation, the mathematical principles and concepts of why and how this aquaduct tunnel was built are explained.

A global fingerprint of macro-scale changes in urban structure from 1999 to 2009

NASA Astrophysics Data System (ADS)

Frolking, Steve; Milliman, Tom; Seto, Karen C.; Friedl, Mark A.

2013-06-01

Urban population now exceeds rural population globally, and 60-80% of global energy consumption by households, businesses, transportation, and industry occurs in urban areas. There is growing evidence that built-up infrastructure contributes to carbon emissions inertia, and that investments in infrastructure today have delayed climate cost in the future. Although the United Nations statistics include data on urban population by country and select urban agglomerations, there are no empirical data on built-up infrastructure for a large sample of cities. Here we present the first study to examine changes in the structure of the world’s largest cities from 1999 to 2009. Combining data from two space-borne sensors—backscatter power (PR) from NASA’s SeaWinds microwave scatterometer, and nighttime lights (NL) from NOAA’s defense meteorological satellite program/operational linescan system (DMSP/OLS)—we report large increases in built-up infrastructure stock worldwide and show that cities are expanding both outward and upward. Our results reveal previously undocumented recent and rapid changes in urban areas worldwide that reflect pronounced shifts in the form and structure of cities. Increases in built-up infrastructure are highest in East Asian cities, with Chinese cities rapidly expanding their material infrastructure stock in both height and extent. In contrast, Indian cities are primarily building out and not increasing in verticality. This new dataset will help characterize the structure and form of cities, and ultimately improve our understanding of how cities affect regional-to-global energy use and greenhouse gas emissions.

Impact evaluation of green-grey infrastructure interaction on built-space integrity: an emerging perspective to urban ecosystem service.

PubMed

Tiwary, Abhishek; Kumar, Prashant

2014-07-15

This paper evaluates the role of urban green infrastructure (GI) in maintaining integrity of built-space. The latter is considered as a lateral ecosystem function, worth including in future assessments of integrated ecosystem services. The basic tenet is that integrated green-grey infrastructures (GGIs) would have three influences on built-spaces: (i) reduced wind withering from flow deviation; (ii) reduced material corrosion/degeneration from pollution removal; and (iii) act as a biophysical buffer in altering the micro-climate. A case study is presented, combining the features of computational fluid dynamics (CFD) in micro-environmental modelling with the emerging science on interactions of GGIs. The coupled seasonal dynamics of the above three effects are assessed for two building materials (limestone and steel) using the following three scenarios: (i) business as usual (BAU), (ii) summer (REGEN-S), and (iii) winter (REGEN-W). Apparently, integrated ecosystem service from green-grey interaction, as scoped in this paper, has strong seasonal dependence. Compared to BAU our results suggest that REGEN-S leads to slight increment in limestone recession (<10%), mainly from exacerbation in ozone damage, while large reduction in steel recession (up to 37%) is observed. The selection of vegetation species, especially their bVOC emission potential and seasonal foliage profile, appears to play a vital role in determining the impact GI has on the integrity of the neighbouring built-up environment. Copyright © 2014 Elsevier B.V. All rights reserved.

Building partnerships for healthy environments: research, leadership and education.

PubMed

Thompson, Susan; Kent, Jennifer; Lyons, Claudine

2014-12-01

As populations across the globe face an increasing health burden from rising rates of obesity, diabetes and other lifestyle-related diseases, health professionals are collaborating with urban planners to influence city design that supports healthy ways of living. This paper details the establishment and operation of an innovative, interdisciplinary collaboration that brings together urban planning and health. Situated in a built environment faculty at one of Australia's most prestigious universities, the Healthy Built Environments Program (HBEP) partners planning academics, a health non-government organisation, local councils and private planning consultants in a state government health department funded consortium. The HBEP focuses on three strategic areas: research, workforce development and education, and leadership and advocacy. Interdisciplinary research includes a comprehensive literature review that establishes Australian-based evidence to support the development, prioritisation and implementation of healthy built environment policies and practices. Another ongoing study examines the design features, social interventions and locational qualities that positively benefit human health. Formal courses, workshops, public lectures and e-learning develop professional capacity, as well as skills in interdisciplinary practice to support productive collaborations between health professionals and planners. The third area involves working with government and non-government agencies, and the private sector and the community, to advocate closer links between health and the built environment. Our paper presents an overview of the HBEP's major achievements. We conclude with a critical review of the challenges, revealing lessons in bringing health and planning closer together to create health-supportive cities for the 21st century.

The built environment & the impact of neighborhood characteristics on youth sexual risk behavior in Cape Town, South Africa

PubMed Central

Burns, Paul A.; Snow, Rachel C.

2012-01-01

Youth sexual risk behavior is often described in social terms, and there has been limited attention to date on how measures of the built environment, including access to municipal services, impact sexual risk behavior, particularly in resource-limited countries. Using the Cape Area Panel Study, we assessed the impact of neighborhood conditions (six single items and a built environment index (BEI)), net of individual socio-demographic factors. The results suggest that built environment factors are associated with sexual risk behavior. Also, the magnitude of associations between built environment factors and sexual risk behavior was more pronounced for females than for males. PMID:22704913

Climate Change Potential Impacts on the Built Environment and Possible Adaptation Strategies

NASA Technical Reports Server (NTRS)

Quattrochi, Dale A.

2014-01-01

The built environment consists of components that exist at a range of scales from small (e.g., houses, shopping malls) to large (e.g., transportation networks) to highly modified landscapes such as cities. Thus, the impacts of climate change on the built environment may have a multitude of effects on humans and the land. The impact of climate change may be exacerbated by the interaction of different events that singly may be minor, but together may have a synergistic set of impacts that are significant. Also, mechanisms may exist wherein the built environment, particularly in the form of cities, may affect weather and the climate on local and regional scales. Hence, a city may be able to cope with prolonged heat waves, but if this is combined with severe drought, the overall result could be significant or even catastrophic, as accelerating demand for energy to cooling taxes water supplies needed both for energy supply and municipal water needs. This presentation surveys potential climate change impacts on the built environment from the perspective of the National Climate Assessment, and explores adaptation measures that can be employed to mitigate these impacts.

Automatic Extraction of Urban Built-Up Area Based on Object-Oriented Method and Remote Sensing Data

NASA Astrophysics Data System (ADS)

Li, L.; Zhou, H.; Wen, Q.; Chen, T.; Guan, F.; Ren, B.; Yu, H.; Wang, Z.

2018-04-01

Built-up area marks the use of city construction land in the different periods of the development, the accurate extraction is the key to the studies of the changes of urban expansion. This paper studies the technology of automatic extraction of urban built-up area based on object-oriented method and remote sensing data, and realizes the automatic extraction of the main built-up area of the city, which saves the manpower cost greatly. First, the extraction of construction land based on object-oriented method, the main technical steps include: (1) Multi-resolution segmentation; (2) Feature Construction and Selection; (3) Information Extraction of Construction Land Based on Rule Set, The characteristic parameters used in the rule set mainly include the mean of the red band (Mean R), Normalized Difference Vegetation Index (NDVI), Ratio of residential index (RRI), Blue band mean (Mean B), Through the combination of the above characteristic parameters, the construction site information can be extracted. Based on the degree of adaptability, distance and area of the object domain, the urban built-up area can be quickly and accurately defined from the construction land information without depending on other data and expert knowledge to achieve the automatic extraction of the urban built-up area. In this paper, Beijing city as an experimental area for the technical methods of the experiment, the results show that: the city built-up area to achieve automatic extraction, boundary accuracy of 2359.65 m to meet the requirements. The automatic extraction of urban built-up area has strong practicality and can be applied to the monitoring of the change of the main built-up area of city.

Urban Health Indicator Tools of the Physical Environment: a Systematic Review.

PubMed

Pineo, Helen; Glonti, Ketevan; Rutter, Harry; Zimmermann, Nici; Wilkinson, Paul; Davies, Michael

2018-04-16

Urban health indicator (UHI) tools provide evidence about the health impacts of the physical urban environment which can be used in built environment policy and decision-making. Where UHI tools provide data at the neighborhood (and lower) scale they can provide valuable information about health inequalities and environmental deprivation. This review performs a census of UHI tools and explores their nature and characteristics (including how they represent, simplify or address complex systems) to increase understanding of their potential use by municipal built environment policy and decision-makers. We searched seven bibliographic databases, four key journals and six practitioner websites and conducted Google searches between January 27, 2016 and February 24, 2016 for UHI tools. We extracted data from primary studies and online indicator systems. We included 198 documents which identified 145 UHI tools comprising 8006 indicators, from which we developed a taxonomy. Our taxonomy classifies the significant diversity of UHI tools with respect to topic, spatial scale, format, scope and purpose. The proportions of UHI tools which measure data at the neighborhood and lower scale, and present data via interactive maps, have both increased over time. This is particularly relevant to built environment policy and decision-makers, reflects growing analytical capability and offers the potential for improved understanding of the complexity of influences on urban health (an aspect noted as a particular challenge by some indicator producers). The relation between urban health indicators and health impacts attributable to modifiable environmental characteristics is often indirect. Furthermore, the use of UHI tools in policy and decision-making appears to be limited, thus raising questions about the continued development of such tools by multiple organisations duplicating scarce resources. Further research is needed to understand the requirements of built environment policy and decision-makers, public health professionals and local communities regarding the form and presentation of indicators which support their varied objectives.

Mortality among workers with chronic radiation sickness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shilnikova, N.S.; Koshurnikova, N.A.; Bolotnikova, M.G.

1996-07-01

This study is based on a registry containing medical and dosimetric data of the employees who began working at different plants of the Mayak nuclear complex between 1948 and 1958 who developed chronic radiation sickness. Mayak is the first nuclear weapons plutonium production enterprise built in Russia and includes nuclear reactors, a radiochemical plant for plutonium separation, and a plutonium production enterprise built in Russia and includes nuclear reactors, a radiochemical plant for plutonium separation, and a plutonium production plant.Workers whose employment began between 1948 and 1958 exhibited a 6-28% incidence of chronic radiation sickness at the different facilities. Theremore » were no cases of chronic radiation sickness among those who began working after 1958. Data on doses of external whole-body gamma-irradiation and mortality in workers with chronic radiation sickness are presented. 6 refs., 5 tabs.« less

Design and Manufacturing of Extremely Low Mass Flight Systems

NASA Technical Reports Server (NTRS)

Johnson, Michael R.

2002-01-01

Extremely small flight systems pose some unusual design and manufacturing challenges. The small size of the components that make up the system generally must be built with extremely tight tolerances to maintain the functionality of the assembled item. Additionally, the total mass of the system is extremely sensitive to what would be considered small perturbations in a larger flight system. The MUSES C mission, designed, built, and operated by Japan, has a small rover provided by NASA that falls into this small flight system category. This NASA-provided rover is used as a case study of an extremely small flight system design. The issues that were encountered with the rover portion of the MUSES C program are discussed and conclusions about the recommended mass margins at different stages of a small flight system project are presented.

Local health department leadership strategies for healthy built environments.

PubMed

Kuiper, Heather; Jackson, Richard J; Barna, Stefi; Satariano, William A

2012-01-01

The built environment is an important but less-recognized health determinant, and local health departments need expanded guidance to address it. In such situations, leadership is particularly relevant. To assess whether and how local public and environmental health leaders increase their departments' health-promoting impact on built environment design, and what pitfalls they should avoid. Mixed-methods employing cross-sectional surveys and a comparative case study. Local public and environmental health departments. PARTICIPANTS SURVEY: A total of 159 (89%) health officers, health directors, and environmental health directors from all 62 local jurisdictions in California. Case-Study: Three departments, 12 cases, 36 health and land-use professionals, and 30 key informants. The study measured the influence of leadership practices on health departments' built environment-related collaborations, land use activities, policy developments, and contributions to physical changes. Quantitative multivariate linear and logistic regression were used. Case-study content analysis and pattern-matching, which related strong and weak leadership practices to outcomes, were also employed. Departments having highly innovative leaders with positive attitudes had greater odds of achieving physical changes to the built environment (OR: 4.5, 3.4, respectively). Leadership that most prepared their departments for built environment work (by updating staffing, structure, and strategy) tripled interagency and cross-sector collaboration (OR: 3.4). Leadership of successful departments consistently (1) established and managed a healthy built environment vision, (2) cultivated innovation, (3) supported, empowered and protected staff, (4) directly engaged in land use and transportation processes, (5) established direct contacts with directors in other departments, and (6) leveraged their professional reputation. Inconsistency in these practices was twice as common among failure as success cases (80%, 43%). Local health leadership underlies public and environmental health departments' community design efforts and should receive technical support and targeted resources to do so effectively.

Automated lattice data generation

NASA Astrophysics Data System (ADS)

Ayyar, Venkitesh; Hackett, Daniel C.; Jay, William I.; Neil, Ethan T.

2018-03-01

The process of generating ensembles of gauge configurations (and measuring various observables over them) can be tedious and error-prone when done "by hand". In practice, most of this procedure can be automated with the use of a workflow manager. We discuss how this automation can be accomplished using Taxi, a minimal Python-based workflow manager built for generating lattice data. We present a case study demonstrating this technology.

Cognitive and Noncognitive Skills, Two Sides of the Same Coin: Using Latent Class Analysis to Compare Students on Select Academic and Career Outcomes

ERIC Educational Resources Information Center

DiGuilio, Laila Lejnieks

2009-01-01

The history of American schooling is replete with the interplay between politics, economics and social behavior. This has never been more evident than in the current environment of high stakes testing on core subjects that largely ignores other important noncognitive outcomes of education. Within this context, the present study built on previous…

Using Historic Parks and Gardens: A Teachers Guide. Education on Site.

ERIC Educational Resources Information Center

Marcus, Susanna; Barker, Rosie

This book is about using parks and gardens as a study of the historic built environment. Parks and gardens have been laid out for utility and enjoyment for centuries. The ideas presented may be adapted to use in any park - public or municipal parks or those part of historic house estates, or any smaller-scale garden. The chapter titles include:…

Ferromagnetic Objects Magnetovision Detection System.

PubMed

Nowicki, Michał; Szewczyk, Roman

2013-12-02

This paper presents the application of a weak magnetic fields magnetovision scanning system for detection of dangerous ferromagnetic objects. A measurement system was developed and built to study the magnetic field vector distributions. The measurements of the Earth's field distortions caused by various ferromagnetic objects were carried out. The ability for passive detection of hidden or buried dangerous objects and the determination of their location was demonstrated.

Fuel quality-processing study. Volume 1: Overview and results

NASA Technical Reports Server (NTRS)

Jones, G. E., Jr.

1982-01-01

The methods whereby the intermediate results were obtained are outlined, and the evaluation of the feasible paths from liquid fossil fuel sources to generated electricity is presented. The segments from which these paths were built are the results from the fuel upgrading schemes, on-site treatments, and exhaust gas treatments detailed in the subsequent volumes. The salient cost and quality parameters are included.

Built-up index methods and their applications for urban extraction from Sentinel 2A satellite data: discussion.

PubMed

Valdiviezo-N, Juan C; Téllez-Quiñones, Alejandro; Salazar-Garibay, Adan; López-Caloca, Alejandra A

2018-01-01

Several built-up indices have been proposed in the literature in order to extract the urban sprawl from satellite data. Given their relative simplicity and easy implementation, such methods have been widely adopted for urban growth monitoring. Previous research has shown that built-up indices are sensitive to different factors related to image resolution, seasonality, and study area location. Also, most of them confuse urban surfaces with bare soil and barren land covers. By gathering the existing built-up indices, the aim of this paper is to discuss some of their advantages, difficulties, and limitations. In order to illustrate our study, we provide some application examples using Sentinel 2A data.

Projector Center: Slide-Tape Presentations on a Classroom Budget.

ERIC Educational Resources Information Center

Barman, Charles R., Ed.

1984-01-01

Presented is a recommended sequence for developing a slide-tape presentation. Steps include selecting a topic, determining objectives for the presentation, constructing a storyboard, writing the script, and recording the script. Comments on use of quotation, sound effects, built-in pauses, and use of student voices are included. (JN)

Grumman OV-1C in flight

NASA Technical Reports Server (NTRS)

1983-01-01

Grumman OV-1C in flight. This OV-1C Mohawk, serial #67-15932, was used in a joint NASA/US Army Aviation Engineering Flight Activity (USAAEFA) program to study a stall-speed warning system in the early 1980s. NASA designed and built an automated stall-speed warning system which presented both airspeed and stall speed to the pilot. Visual indication of impending stall would be displayed to the pilot as a cursor or pointer located on a conventional airspeed indicator. In addition, an aural warning at predetermined stall margins was presented to the pilot through a voice synthesizer. The Mohawk was developed by Grumman Aircraft as a photo observation and reconnaissance aircraft for the US Marines and the US Army. The OV-1 entered production in October 1959 and served the US Army in Europe, Korea, the Viet Nam War, Central and South America, Alaska, and during Desert Shield/Desert Storm in the Middle East. The Mohawk was retired from service in September 1996. 133 OV-1Cs were built, the 'C' designating the model which used an IR (infrared) imaging system to provide reconnaissance.

Effects of environmental design on patient outcome: a systematic review.

PubMed

Laursen, Jannie; Danielsen, Anne; Rosenberg, Jacob

2014-01-01

The aim of this systematic review was to assess how inpatients were affected by the built environment design during their hospitalization. Over the last decade, the healthcare system has become increasingly aware of how focus on healthcare environment might affect patient satisfaction. The focus on environmental design has become a field with great potential because of its possible impact on cost control while improving quality of care. A systematic literature search was conducted to identify current and past studies about evidence-based healthcare design. The following databases were searched: Medline/PubMed, Cinahl, and Embase. Inclusion criteria were randomized clinical trials (RCTs) investigating the effect of built environment design interventions such as music, natural murals, and plants in relation to patients' health outcome. Built environment design aspects such as audio environment and visual environment had a positive influence on patients' health outcomes. Specifically the studies indicated a decrease in patients' anxiety, pain, and stress levels when exposed to certain built environment design interventions. The built environment, especially specific audio and visual aspects, seems to play an important role in patients' outcomes, making hospitals a better healing environment for patients. Built environment, evidence-based design, healing environments, hospitals, literature review.

Motion through a non-homogeneous porous medium: Hydrodynamic permeability of a membrane composed of cylindrical particles

NASA Astrophysics Data System (ADS)

Yadav, Pramod Kumar

2018-01-01

The present problem is concerned with the flow of a viscous steady incompressible fluid through a non-homogeneous porous medium. Here, the non-homogeneous porous medium is a membrane built up by cylindrical particles. The flow outside the membrane is governed by the Stokes equation and the flow through the non-homogeneous porous membrane composed by cylindrical particles is governed by Darcy's law. In this work, we discussed the effect of various fluid parameters like permeability parameter k0, discontinuity coefficient at fluid-non homogeneous porous interface, viscosity ratio of viscous incompressible fluid region and non-homogeneous porous region, etc. on hydrodynamic permeability of a membrane, stress and on velocity profile. The comparative study for hydrodynamic permeability of membrane built up by non-homogeneous porous cylindrical particles and porous cylindrical shell enclosing a cylindrical cavity has been studied. The effects of various fluid parameters on the streamlines flow patterns are also discussed.

High-Resolution Uitra Low Power, Intergrated Aftershock and Microzonation System

NASA Astrophysics Data System (ADS)

Passmore, P.; Zimakov, L. G.

2012-12-01

Rapid Aftershock Mobilization plays an essential role in the understanding of both focal mechanism and rupture propagation caused by strong earthquakes. A quick assessment of the data provides a unique opportunity to study the dynamics of the entire earthquake process in-situ. Aftershock study also provides practical information for local authorities regarding the post earthquake activity, which is very important in order to conduct the necessary actions for public safety in the area affected by the strong earthquake. Refraction Technology, Inc. has developed a self-contained, fully integrated Aftershock System, model 160-03, providing the customer simple and quick deployment during aftershock emergency mobilization and microzonation studies. The 160-03 has no external cables or peripheral equipment for command/control and operation in the field. The 160-03 contains three major components integrated in one case: a) 24-bit resolution state-of-the art low power ADC with CPU and Lid interconnect boards; b) power source; and c) three component 2 Hz sensors (two horizontals and one vertical), and built-in ±4g accelerometer. Optionally, the 1 Hz sensors can be built-in the 160-03 system at the customer's request. The self-contained rechargeable battery pack provides power autonomy up to 7 days during data acquisition at 200 sps on continuous three weak motion and triggered three strong motion recording channels. For longer power autonomy, the 160-03 Aftershock System battery pack can be charged from an external source (solar power system). The data in the field is recorded to a built-in swappable USB flash drive. The 160-03 configuration is fixed based on a configuration file stored on the system, so no external command/control interface is required for parameter setup in the field. For visual control of the system performance in the field, the 160-03 has a built-in LED display which indicates the systems recording status as well as a hot swappable USB drive and battery status. The detailed specifications and performance are presented and discussed.;

Built environment change: a framework to support health-enhancing behaviour through environmental policy and health research.

PubMed

Berke, Ethan M; Vernez-Moudon, Anne

2014-06-01

As research examining the effect of the built environment on health accelerates, it is critical for health and planning researchers to conduct studies and make recommendations in the context of a robust theoretical framework. We propose a framework for built environment change (BEC) related to improving health. BEC consists of elements of the built environment, how people are exposed to and interact with them perceptually and functionally, and how this exposure may affect health-related behaviours. Integrated into this framework are the legal and regulatory mechanisms and instruments that are commonly used to effect change in the built environment. This framework would be applicable to medical research as well as to issues of policy and community planning.

Overview of ergonomics built environment.

PubMed

Costa, Ana Paula Lima; Campos, Fábio; Villarouco, Vilma

2012-01-01

This article provides an overview of academic research in the scientific discipline of ergonomics in the context of the built environment, from data collected from journals, conferences and research groups whose focus is the theme of the Ergonomics of Built Environment. Starting from the context of the Ergonomics of Built Environment, it identifies the broadcast media who publish work in this area and its scientific production, seeking to recover from the first published papers to the production of the most recent scientific journals and conferences to be launched 2010. From this mapping, we identified the major outstanding and open issues in these studies, outlining the state of the art Ergonomics Built Environment, in order to inform those interested and intend to develop scientific research in this field.

A genome-wide association study platform built on iPlant cyber-infrastructure

USDA-ARS?s Scientific Manuscript database

We demonstrated a flexible Genome-Wide Association (GWA) Study (GWAS) platform built upon the iPlant Collaborative Cyber-infrastructure. The platform supports big data management, sharing, and large scale study of both genotype and phenotype data on clusters. End users can add their own analysis too...

Attitude-referenced radiometer study. Part 2: Primary calibration system

NASA Technical Reports Server (NTRS)

Williamson, W. R.; Otte, A. A.

1971-01-01

A primary calibration system, PCS, for infrared radiometers has been developed, built, and tested. The system allows radiometers to be calibrated with less than 1 percent error for use in earth coverage horizon measurements, earth resources surveys, and synoptic meteorological measurement. The final design, fabrication and test of the PCS are reported. A detailed description of the PCS construction is presented, along with the results of a complete series of functional tests. Test to verify the source thermal characteristics, collimator reflectance, and output beam characteristics are described and their results presented.

A one degree of freedom haptic system to investigate issues in human perception with particular application to probing tissue.

PubMed

Dibble, Edward; Zivanovic, Aleksandar; Davies, Brian

2004-01-01

This paper presents the results of several early studies relating to human haptic perception sensitivity when probing a virtual object. A 1 degree of freedom (DoF) rotary haptic system, that was designed and built for this purpose, is also presented. The experiments were to assess the maximum forces applied in a minimally invasive surgery (MIS) procedure, quantify the compliance sensitivity threshold when probing virtual tissue and identify the haptic system loop rate necessary for haptic feedback to feel realistic.

Visualizing fungal metabolites during mycoparasitic interaction by MALDI mass spectrometry imaging

PubMed Central

Holzlechner, Matthias; Reitschmidt, Sonja; Gruber, Sabine; Zeilinger, Susanne

2016-01-01

Studying microbial interactions by MALDI mass spectrometry imaging (MSI) directly from growing media is a difficult task if high sensitivity is demanded. We present a quick and robust sample preparation strategy for growing fungi (Trichoderma atroviride, Rhizoctonia solani) on glass slides to establish a miniaturized confrontation assay. By this we were able to visualize metabolite distributions by MALDI MSI after matrix deposition with a home‐built sublimation device and thorough recrystallization. We present for the first time MALDI MSI data for secondary metabolite release during active mycoparasitism. PMID:26959280

When is a terrace not a terrace? The importance of understanding landscape evolution in studies of terraced agriculture.

PubMed

Ferro-Vázquez, C; Lang, C; Kaal, J; Stump, D

2017-11-01

Before the invention of modern, large-scale engineering projects, terrace systems were rarely built in single phases of construction, but instead developed gradually, and could even be said to have evolved. Understanding this process of landscape change is therefore important in order to fully appreciate how terrace systems were built and functioned, and is also pivotal to understanding how the communities that farmed these systems responded to changes; whether these are changes to the landscape brought about by the farming practices themselves, or changes to social, economic or climatic conditions. Combining archaeological stratigraphy, soil micromorphology and geochemistry, this paper presents a case-study from the historic and extensive terraced landscape at Konso, southwest Ethiopia, and demonstrates - in one important river valley at least - that the original topsoil and much of the subsoil was lost prior to the construction of hillside terraces. Moreover, the study shows that alluvial sediment traps that were built adjacent to rivers relied on widespread hillside soil erosion for their construction, and strongly suggests that these irrigated riverside fields were formerly a higher economic priority than the hillside terraces themselves; a possibility that was not recognised by numerous observational studies of farming in this landscape. Research that takes into account how terrace systems change through time can thus provide important details of whether the function of the system has changed, and can help assess how the legacies of former practices impact current or future cultivation. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Impact of Neighborhood Social and Built Environment Factors across the Cancer Continuum: Current Research, Methodologic Considerations, and Future Directions

PubMed Central

Gomez, Scarlett Lin; Shariff-Marco, Salma; De Rouen, Mindy; Keegan, Theresa H. M.; Yen, Irene H.; Mujahid, Mahasin; Satariano, William A.; Glaser, Sally L.

2015-01-01

Neighborhood social and built environments have been recognized as important contexts in which health is shaped. We review the extent to which these neighborhood factors have been addressed in population-level cancer research, with a scan of the literature for research that focuses on specific social and/or built environment characteristics and association with outcomes across the cancer continuum, including incidence, diagnosis, treatment, survivorship, and survival. We discuss commonalities and differences in methodologies across studies, current challenges in research methodology, and future directions in this research area. The assessment of social and built environment factors in relation to cancer is a relatively new field, with 82% of 34 reviewed papers published since 2010. Across the wide range of social and built environment exposures and cancer outcomes considered by the studies, numerous associations were reported. However, the directions and magnitudes of association varied, due in large part to the variation in cancer sites and outcomes being studied, but also likely due to differences in study populations, geographical region, and, importantly, choice of neighborhood measure and geographic scale. We recommend that future studies consider the life course implications of cancer incidence and survival, integrate secondary and self-report data, consider work neighborhood environments, and further develop analytical and statistical approaches appropriate to the geospatial and multilevel nature of the data. Incorporating social and built environment factors into research on cancer etiology and outcomes can provide insights into disease processes, identify vulnerable populations, and generate results with translational impact of relevance for interventionists and policy makers. PMID:25847484

Understanding the Independent and Joint Associations of the Home and Workplace Built Environments on Cardiorespiratory Fitness and Body Mass Index

PubMed Central

Hoehner, Christine M.; Allen, Peg; Barlow, Carolyn E.; Marx, Christine M.; Brownson, Ross C.; Schootman, Mario

2013-01-01

This observational study examined the associations of built environment features around the home and workplace with cardiorespiratory fitness (CRF) based on a treadmill test and body mass index (BMI) (weight (kg)/height (m)2). The study included 8,857 adults aged 20–88 years who completed a preventive medical examination in 2000–2007 while living in 12 Texas counties. Analyses examining workplace neighborhood characteristics included a subset of 4,734 participants. Built environment variables were derived around addresses by using geographic information systems. Models were adjusted for individual-level and census block group–level demographics and socioeconomic status, smoking, BMI (in CRF models), and all other home or workplace built environment variables. CRF was associated with higher intersection density, higher number of private exercise facilities around the home and workplace, larger area of vegetation around the home, and shorter distance to the closest city center. Aside from vegetation, these same built environment features around the home were also associated with BMI. Participants who lived and worked in neighborhoods in the lowest tertiles for intersection density and the number of private exercise facilities had lower CRF and higher BMI values than participants who lived and worked in higher tertiles for these variables. This study contributes new evidence to suggest that built environment features around homes and workplaces may affect health. PMID:23942215

Exploring the Role of the Built and Social Neighborhood Environment in Moderating Stress and Health

PubMed Central

Yang, Tse-Chuan

2014-01-01

Background Health researchers have explored how different aspects of neighborhood characteristics contribute to health and well-being, but current understanding of built environment factors is limited. Purpose This study explores whether the association between stress and health varies by residential neighborhood, and if yes, whether built and social neighborhood environment characteristics act as moderators. Methods This study uses multilevel modeling and variables derived from geospatial data to explore the role of neighborhood environment in moderating the association of stress with health. Individual-level data (N=4,093) were drawn from residents of 45 neighborhoods within Philadelphia County, PA, collected as part of the 2006 Philadelphia Health Management Corporation's Household Health Survey. Results We find that the negative influence of high stress varied by neighborhood, that residential stability and affluence (social characteristics) attenuated the association of high stress with health, and that the presence of hazardous waste facilities (built environment characteristics) moderated health by enhancing the association with stress. Conclusions Our findings suggest that neighborhood environment has both direct and moderating associations with health, after adjusting for individual characteristics. The use of geospatial data could broaden the scope of stress–health research and advance knowledge by untangling the intertwined relationship between built and social environments, stress, and health. In particular, future studies should integrate built environment characteristics in health-related research; these characteristics are modifiable and can facilitate health promotion policies. PMID:20300905

Improved trip generation data for Texas using workplace and special generator surveys : workshop materials.

DOT National Transportation Integrated Search

2014-08-01

Workshop Objectives: : Present Texas Trip Generation Manual : How developed : How it can be used, built upon : Provide examples and discuss : Present Generic WP Attraction Rates : Review Trip Attractions and Advanced Models

One Nucleon Transfer Reactions Around {sup 68}Ni at REX-ISOLDE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patronis, N.; Raabe, R.; Bree, N.

2008-05-12

The newly built position sensitive Si detectors array of nearly 4{pi} angular coverage which is going to be installed at the REX-ISOLDE facility at CERN is briefly presented. This setup will be combined with the Miniball detectors array, constituting a unique tool for the study of one-nucleon transfer reactions. The experimental study of d({sup 66}Ni,p){sup 67}Ni reaction will be proposed, as a starting point for a series of experiments aiming to the study of the single particle character of the levels of the odd mass neutron reach unstable Ni isotopes. In this contribution, the feasibility and sensitivity of the experimentmore » is presented.« less

Common mental disorders and the built environment in Santiago, Chile.

PubMed

Araya, Ricardo; Montgomery, Alan; Rojas, Graciela; Fritsch, Rosemarie; Solis, Jaime; Signorelli, Andres; Lewis, Glyn

2007-05-01

There is growing research interest in the influence of the built environment on mental disorders. To estimate the variation in the prevalence of common mental disorders attributable to individuals and the built environment of geographical sectors where they live. A sample of 3870 adults (response rate 90%) clustered in 248 geographical sectors participated in a household cross-sectional survey in Santiago, Chile. Independently rated contextual measures of the built environment were obtained. The Clinical Interview Schedule was used to estimate the prevalence of common mental disorders. There was a significant association between the quality of the built environment of small geographical sectors and the presence of common mental disorders among its residents. The better the quality of the built environment, the lower the scores for psychiatric symptoms; however, only a small proportion of the variation in common mental disorder existed at sector level, after adjusting for individual factors. Findings from our study, using a contextual assessment of the quality of the built environment and multilevel modelling in the analysis, suggest these associations may be more marked in non-Western settings with more homogeneous geographical sectors.

MAGIC: Model and Graphic Information Converter

NASA Technical Reports Server (NTRS)

Herbert, W. C.

2009-01-01

MAGIC is a software tool capable of converting highly detailed 3D models from an open, standard format, VRML 2.0/97, into the proprietary DTS file format used by the Torque Game Engine from GarageGames. MAGIC is used to convert 3D simulations from authoritative sources into the data needed to run the simulations in NASA's Distributed Observer Network. The Distributed Observer Network (DON) is a simulation presentation tool built by NASA to facilitate the simulation sharing requirements of the Data Presentation and Visualization effort within the Constellation Program. DON is built on top of the Torque Game Engine (TGE) and has chosen TGE's Dynamix Three Space (DTS) file format to represent 3D objects within simulations.

The anatomy of the safe and social suburb: an exploratory study of the built environment, social capital and residents' perceptions of safety.

PubMed

Wood, Lisa; Shannon, Tya; Bulsara, Max; Pikora, Terri; McCormack, Gavin; Giles-Corti, Billie

2008-03-01

This study explored the relationship between social capital and aspects of the built environment, focusing in particular on the walkability of suburbs as determined by street network design and the mix of land uses. We measured social capital and feelings of personal safety in 335 residents of three suburbs in metropolitan Perth, WA, and collected objective and perceived data on the built environment. After adjustment for demographic factors, the built environment was found to have a significant but small effect on social capital and feelings of safety, particularly in relation to the number and perceived adequacy of destinations. A high level of neighbourhood upkeep was associated with both higher social capital and feelings of safety.

Incorporating a built environment module into an accelerated second-degree community health nursing course.

PubMed

Hays, Judith C; Davis, Jeffrey A; Miranda, Marie Lynn

2006-01-01

Environmental quality is a leading indicator of population health. Environmental health content has been integrated into the curriculum of an Accelerated Bachelor of Science in Nursing program for second-degree students through development of an environmental health nursing module for the final-semester community health nursing course. The module was developed through collaboration between two professional schools at Duke University (the School of Nursing and the Nicholas School of the Environment and Earth Sciences). It focused on the role of the built environment in community health and featured a mix of teaching strategies, including five components: (1) classroom lecture with associated readings, (2) two rounds of online small-group student discussions, (3) assessment of the built environment in local neighborhoods by student teams, (4) team presentation of the neighborhood assessments, and (5) individual student papers synthesizing the conclusions from all team presentations. The goal of the module was to provide nursing students with an organizing framework for integrating environmental health into clinical practice and an innovative tool for understanding community-level components of public health.

Exposure to natural environments, and photographs of natural environments, promotes more positive body image.

PubMed

Swami, Viren; Barron, David; Furnham, Adrian

2018-03-01

Five studies were conducted to understand the impact of nature exposure on body image. In three studies using different designs and outcome measures, British university students were exposed to photographs of natural or built environments. Results indicated that exposure to images of natural, but not built, environments resulted in improved state body image. In Study 4, British community participants went on a walk in a natural or built environment, with results indicating that the walk in a natural environment resulted in significantly higher state body appreciation, whereas the walk in a built environment resulted in significantly lower scores. In Study 5, British participants were recruited as they were entering a designed green space on their own volition. Results indicated that spending time in the green space led to improved state body appreciation. These results indicate that exposure to isomorphic or in-situ natural environments has positive effects on state body image. Copyright © 2017 Elsevier Ltd. All rights reserved.

Magnetically Delayed Low-Pressure Gas Discharge Switching

DTIC Science & Technology

1993-06-01

the gap, minimizes this effect. It is this version of the low- pressure switch that we are presently studying. Our magnetically delayed low... pressure switch (MDLPS) test-stand was built primarily to support the long-pulse, relativistic klystron (RK) and free electron laser (FEL) work at... pressure switch and compared the performance with and without the saturable inductor. A comparison of typi- cal closure properties is shown in Fig

A magnetostrictive acceleration sensor for registration of chest wall displacements

NASA Astrophysics Data System (ADS)

Kaniusas, E.; Mehnen, L.; Krell, C.; Pfützner, H.

2000-06-01

The present study concerns a novel acceleration sensor built up using a bimetallic strip with one freely oscillating end. The strip consists of a magnetostrictive amorphous ribbon glued on a nonmagnetic metal ribbon. The sensor's effectiveness is demonstrated for the case of chest wall displacements as resulting from cardiorespiratory activity. The cheap and easy-to-handle novel sensor offers multiple information on the so-called sleep apnea syndrome.

Does Built Environment Matter to Early Adolescents' Physical Activity?

ERIC Educational Resources Information Center

Lin, Jen-Jia; Ting, Tzu-Cheng

2014-01-01

This study examined the relationship of built environments to physical activity among adolescents aged 12 to 14 years old. The study sample included 269 junior high school students studying in Nangang District, Taipei, Taiwan. Sample physical activity data were obtained by surveying adolescents using a self-administered short version of the…

An open-source java platform for automated reaction mapping.

PubMed

Crabtree, John D; Mehta, Dinesh P; Kouri, Tina M

2010-09-27

This article presents software applications that have been built upon a modular, open-source, reaction mapping library that can be used in both cheminformatics and bioinformatics research. We first describe the theoretical underpinnings and modular architecture of the core software library. We then describe two applications that have been built upon that core. The first is a generic reaction viewer and mapper, and the second classifies reactions according to rules that can be modified by end users with little or no programming skills.

OpenMP Performance on the Columbia Supercomputer

NASA Technical Reports Server (NTRS)

Haoqiang, Jin; Hood, Robert

2005-01-01

This presentation discusses Columbia World Class Supercomputer which is one of the world's fastest supercomputers providing 61 TFLOPs (10/20/04). Conceived, designed, built, and deployed in just 120 days. A 20-node supercomputer built on proven 512-processor nodes. The largest SGI system in the world with over 10,000 Intel Itanium 2 processors and provides the largest node size incorporating commodity parts (512) and the largest shared-memory environment (2048) with 88% efficiency tops the scalar systems on the Top500 list.

Automated iodine monitor system. [for aqueous solutions

NASA Technical Reports Server (NTRS)

1973-01-01

The feasibility of a direct spectrophotometric measurement of iodine in water was established. An iodine colorimeter, was built to demonstrate the practicality of this technique. The specificity of this method was verified when applied to an on-line system where a reference solution cannot be used, and a preliminary design is presented for an automated iodine measuring and controlling system meeting the desired specifications. An Automated iodine monitor/controller system based on this preliminary design was built, tested, and delivered to the Johnson Space Center.

Immersive Virtual Environment Technology to Supplement Environmental Perception, Preference and Behavior Research: A Review with Applications

PubMed Central

Smith, Jordan W.

2015-01-01

Immersive virtual environment (IVE) technology offers a wide range of potential benefits to research focused on understanding how individuals perceive and respond to built and natural environments. In an effort to broaden awareness and use of IVE technology in perception, preference and behavior research, this review paper describes how IVE technology can be used to complement more traditional methods commonly applied in public health research. The paper also describes a relatively simple workflow for creating and displaying 360° virtual environments of built and natural settings and presents two freely-available and customizable applications that scientists from a variety of disciplines, including public health, can use to advance their research into human preferences, perceptions and behaviors related to built and natural settings. PMID:26378565

Radiofrequency Electromagnetic Field Map of Timisoara

NASA Astrophysics Data System (ADS)

Stefu, N.; Solyom, I.; Arama, A.

2015-12-01

There are many electromagnetic field (EMF) sources nowadays acting simultaneously, especially in urban areas, making the theoretical estimation of electromagnetic power at ground level very difficult. This paper reports on EMF maps built with measurements collected in Timisoara, at various radiofrequencies. A grid of 15×15 squares was built (approximate resolution 400m x 400m) and measurements of the average and maximum values of the electric field E, magnetic field H and total power density S at 0.9, 1.8 and 2.4 GHz were collected in every node of the grid. Positions of the nodes in terms of latitude and longitude were also collected. Maps were built presenting the spatial distribution of the measured quantities over Timisoara. Potential influences of EMF on public health are discussed.

Immersive Virtual Environment Technology to Supplement Environmental Perception, Preference and Behavior Research: A Review with Applications.

PubMed

Smith, Jordan W

2015-09-11

Immersive virtual environment (IVE) technology offers a wide range of potential benefits to research focused on understanding how individuals perceive and respond to built and natural environments. In an effort to broaden awareness and use of IVE technology in perception, preference and behavior research, this review paper describes how IVE technology can be used to complement more traditional methods commonly applied in public health research. The paper also describes a relatively simple workflow for creating and displaying 360° virtual environments of built and natural settings and presents two freely-available and customizable applications that scientists from a variety of disciplines, including public health, can use to advance their research into human preferences, perceptions and behaviors related to built and natural settings.

External built residential environment characteristics that affect mental health of adults.

PubMed

Ochodo, Charles; Ndetei, D M; Moturi, W N; Otieno, J O

2014-10-01

External built residential environment characteristics include aspects of building design such as types of walls, doors and windows, green spaces, density of houses per unit area, and waste disposal facilities. Neighborhoods that are characterized by poor quality external built environment can contribute to psychosocial stress and increase the likelihood of mental health disorders. This study investigated the relationship between characteristics of external built residential environment and mental health disorders in selected residences of Nakuru Municipality, Kenya. External built residential environment characteristics were investigated for 544 residents living in different residential areas that were categorized by their socioeconomic status. Medically validated interview schedules were used to determine mental health of residents in the respective neighborhoods. The relationship between characteristics of the external built residential environment and mental health of residents was determined by multivariable logistic regression analyses and chi-square tests. The results show that walling materials used on buildings, density of dwelling units, state of street lighting, types of doors, states of roofs, and states of windows are some built external residential environment characteristics that affect mental health of adult males and females. Urban residential areas that are characterized by poor quality external built environment substantially expose the population to daily stressors and inconveniences that increase the likelihood of developing mental health disorders.

Aluminum alloy AA-6061 and RSA-6061 heat treatment for large mirror applications

NASA Astrophysics Data System (ADS)

Newswander, T.; Crowther, B.; Gubbels, G.; Senden, R.

2013-09-01

Aluminum mirrors and telescopes can be built to perform well if the material is processed correctly and can be relatively low cost and short schedule. However, the difficulty of making high quality aluminum telescopes increases as the size increases, starting with uniform heat treatment through the thickness of large mirror substrates. A risk reduction effort was started to build and test a ½ meter diameter super polished aluminum mirror. Material selection, the heat treatment process and stabilization are the first critical steps to building a successful mirror. In this study, large aluminum blanks of both conventional AA-6061 per AMS-A-22771 and RSA AA-6061 were built, heat treated and stress relieved. Both blanks were destructively tested with a cut through the thickness. Hardness measurements and tensile tests were completed. We present our results in this paper and make suggestions for modification of procedures and future work.

Built-in active sensing diagnostic system for civil infrastructure systems

NASA Astrophysics Data System (ADS)

Wu, Fan; Chang, Fu-Kuo

2001-07-01

A reliable, robust monitoring system can improve the maintenance of and provide safety protection for civil structures and therefore prolong their service lives. A built-in, active sensing diagnostic technique for civil structures has been under investigation. In this technique, piezoelectric materials are used as sensors/actuators to receive and generate signals. The transducers are embedded in reinforced concrete (RC) beams and are designed to detect damage, particularly debonding damage between the reinforcing bars and concrete. This paper presents preliminary results from a feasibility study of the technology. Laboratory experiments performed on RC beams, with piezo-electric sensors and actuators mounted on reinforced steel bars, have clearly demonstrated that the proposed technique could detect debonding damage. Analytical work, using a special purpose finite-element software, PZFlex, was also conducted to interpret the relationship between the measured data and actual debonding damage. Effectiveness of the proposed technique for detecting debonding damage in civil structures has been demonstrated.

Improvement program for polycarbonate capacitors. [hermetically sealed, and ac wound

NASA Technical Reports Server (NTRS)

Bailey, R. R.; Waterman, K. D.

1973-01-01

Hermetically sealed, wound, AC, polycarbonate capacitors incorporating design improvements recommended in a previous study were designed and built. A 5000 hour, 400 Hz ac life test was conducted using 384 of these capacitors to verify the adequacy of the design improvements. The improvements incorporated in the capacitors designed for this program eliminated the major cause of failure found in the preceding work, termination failure. A failure cause not present in the previous test became significant in this test with capacitors built from one lot of polycarbonate film. The samples from this lot accounted for 25 percent of the total test complement. Analyses of failed samples showed that the film had an excessive solvent content. This solvent problem was found in 37 of the total 46 failures which occurred in this test. The other nine were random failures resulting from causes such as seal leaks, foreign particles, and possibly wrinkles.

Acessibility in collective housing for the elderly: a case study in Portugal.

PubMed

Paiva, Marie Monique Bruère; Villarouco, Vilma

2012-01-01

Physical spaces need to be adjusted to suit the changes of a physical, cognitive and emotional order occasioned by the natural aging of people. Ergonomics of the built environment contributes to improving the interaction of the user and physical environment, with a view to their comfort and safety. By thinking through the influence that environments have on the quality of life of the elderly, this article presents an assessment of accessibility in private units--bedrooms and bathrooms--of a Long-Stay Institution for the Elderly (ILPI in Portuguese) in Portugal. The analysis of the physical and spatial conditioning factors by means of the Ergonomics Methodology for the Built Environment (EMBE), proposed by VILLAROUCO (2008), gave evidence of the need for interventions to suitably adapt physical infrastructure, with the objective of promoting the physical well-being of the elderly, and thus, enhancing the autonomy and independence of a wider range of users.

Multicriteria decision-aid method to evaluate the performance of stormwater infiltration systems over the time.

PubMed

Moura, P; Barraud, S; Baptista, M B; Malard, F

2011-01-01

Nowadays, stormwater infiltration systems are frequently used because of their ability to reduce flows and volumes in downstream sewers, decrease overflows in surface waters and make it possible to recharge groundwater. Moreover, they come in various forms with different uses. Despite these advantages the long term sustainability of these systems is questionable and their real performances have to be assessed taking into account various and sometimes conflicting aspects. To address this problem a decision support system is proposed. It is based on a multicriteria method built to help managers to evaluate the performance of an existing infiltration system at different stages of its lifespan and identify whether it performs correctly or not, according to environmental, socio-economic, technical and sanitary aspects. The paper presents successively: the performance indicators and the way they were built, the multicriteria method to identify if the system works properly and a case study.

The role of the built environment in explaining educational inequalities in walking and cycling among adults in the Netherlands.

PubMed

van Wijk, Daniël C; Groeniger, Joost Oude; van Lenthe, Frank J; Kamphuis, Carlijn B M

2017-03-31

This study examined whether characteristics of the residential built environment (i.e. population density, level of mixed land use, connectivity, accessibility of facilities, accessibility of green) contributed to educational inequalities in walking and cycling among adults. Data from participants (32-82 years) of the 2011 survey of the Dutch population-based GLOBE study were used (N = 2375). Highest attained educational level (independent variable) and walking for transport, cycling for transport, walking in leisure time and cycling in leisure time (dependent variables) were self-reported in the survey. GIS-systems were used to obtain spatial data on residential built environment characteristics. A four-step mediation-based analysis with log-linear regression models was used to examine to contribution of the residential built environment to educational inequalities in walking and cycling. As compared to the lowest educational group, the highest educational group was more likely to cycle for transport (RR 1.13, 95% CI 1.04-1.23), walk in leisure time (RR 1.12, 95% CI 1.04-1.21), and cycle in leisure time (RR 1.12, 95% CI 1.03-1.22). Objective built environment characteristics were related to these outcomes, but contributed minimally to educational inequalities in walking and cycling. On the other hand, compared to the lowest educational group, the highest educational group was less likely to walk for transport (RR 0.91, 95% CI 0.82-1.01), which could partly be attributed to differences in the built environment. This study found that objective built environment characteristics contributed minimally to educational inequalities in walking and cycling in the Netherlands.

Human Behavior and Environmental Sustainability: promoting a pro-environmental behavior by harnessing the social, psychological and physical influences of the built environment

NASA Astrophysics Data System (ADS)

Abusafieh, Shaden; Razem, Maiss

2017-11-01

Recently, technological advancements in the sustainable design field have allowed us to reduce the ecological impact of the built environment, to reduce consumption of non-renewable resources, to create healthy environments and in some cases may even rehabilitate the ecosystem. Nevertheless, several studies have been carried out showing that sustainable technology does not automatically lead to environmentally friendly behaviors in its users. Various environmental problems threaten environmental sustainability and many of these problems are rooted in human behavior. Unfortunately, there is a lack in studies which take into consideration the human behavior influences within a sustainable built environment. We believe that the built environment should be used to support human goals and requirements, but at the same time we should consider it as a context in which human values and behaviors are cultivated. This research aimed to help in promoting environmental sustainability by using architectural design in changing relevant human behavior toward an environmentally friendly behavior. In order to achieve this, the research adopted Environment-centered Approach to gain more acute perspective into the relationship between the physical environment and human behavior, focusing on social, psychological and physical influences of the built environment. It appears that environmental psychology's merits have high potential in changing behavior within the built environment. The research provides a systematic approach for selecting, assessing, evaluating the behaviors to be changed and the factors that determine them. Furthermore, this approach helps in choosing the best interventions that could be applied in built environment to encourage such a sustainable behavior. This study tried to construct an agenda for further researches to find particular architectural design elements and strategies that we can harness to develop a pro-environment human behavior.

The GlueX central drift chamber: Design and performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Haarlem, Y; Barbosa, F; Dey, B

2010-10-01

Tests and studies concerning the design and performance of the GlueX Central Drift Chamber (CDC) are presented. A full-scale prototype was built to test and steer the mechanical and electronic design. Small scale prototypes were constructed to test for sagging and to do timing and resolution studies of the detector. These studies were used to choose the gas mixture and to program a Monte Carlo simulation that can predict the detector response in an external magnetic field. Particle identification and charge division possibilities were also investigated.

The Auroral Particles experiment

NASA Technical Reports Server (NTRS)

1981-01-01

An instrument for the detection of particles in the energy range of 0.1 ev to 80 Kev was designed, built, tested, calibrated, and flown onboard the spacecraft ATS-6. Data from this instrument generated the following research: intensive studies of the plasma in the vicinity of the spacecraft; global variations of plasmas; correlative studies using either other spacecraft or ground based measurements; and studies of spacecraft interactions with ambient plasmas including charging, local electric fields due to differential charging, and active control of spacecraft potential. Results from this research are presented.

The Bionic Clicker Mark I & II

PubMed Central

Magee, Elliott G.; Ourselin, S.; Nikitichev, Daniil; Vercauteren, T.; Vanhoestenberghe, Anne

2017-01-01

In this manuscript, we present two 'Bionic Clicker' systems, the first designed to demonstrate electromyography (EMG) based control systems for educational purposes and the second for research purposes. EMG based control systems pick up electrical signals generated by muscle activation and use these as inputs for controllers. EMG controllers are widely used in prosthetics to control limbs. The Mark I (MK I) clicker allows the wearer to change the slide of a presentation by raising their index finger. It is built around a microcontroller and a bio-signals shield. It generated a lot of interest from both the public and research community. The Mark II (MK II) device presented here was designed to be a cheaper, sleeker, and more customizable system that can be easily modified and directly transmit EMG data. It is built using a wireless capable microcontroller and a muscle sensor. PMID:28829413

The Bionic Clicker Mark I & II.

PubMed

Magee, Elliott G; Ourselin, S; Nikitichev, Daniil; Vercauteren, T; Vanhoestenberghe, Anne

2017-08-14

In this manuscript, we present two 'Bionic Clicker' systems, the first designed to demonstrate electromyography (EMG) based control systems for educational purposes and the second for research purposes. EMG based control systems pick up electrical signals generated by muscle activation and use these as inputs for controllers. EMG controllers are widely used in prosthetics to control limbs. The Mark I (MK I) clicker allows the wearer to change the slide of a presentation by raising their index finger. It is built around a microcontroller and a bio-signals shield. It generated a lot of interest from both the public and research community. The Mark II (MK II) device presented here was designed to be a cheaper, sleeker, and more customizable system that can be easily modified and directly transmit EMG data. It is built using a wireless capable microcontroller and a muscle sensor.

Walking and child pedestrian injury: a systematic review of built environment correlates of safe walking.

PubMed

Rothman, Linda; Buliung, Ron; Macarthur, Colin; To, Teresa; Howard, Andrew

2014-02-01

The child active transportation literature has focused on walking, with little attention to risk associated with increased traffic exposure. This paper reviews the literature related to built environment correlates of walking and pedestrian injury in children together, to broaden the current conceptualization of walkability to include injury prevention. Two independent searches were conducted focused on walking in children and child pedestrian injury within nine electronic databases until March, 2012. Studies were included which: 1) were quantitative 2) set in motorized countries 3) were either urban or suburban 4) investigated specific built environment risk factors 5) had outcomes of either walking in children and/or child pedestrian roadway collisions (ages 0-12). Built environment features were categorized according to those related to density, land use diversity or roadway design. Results were cross-tabulated to identify how built environment features associate with walking and injury. Fifty walking and 35 child pedestrian injury studies were identified. Only traffic calming and presence of playgrounds/recreation areas were consistently associated with more walking and less pedestrian injury. Several built environment features were associated with more walking, but with increased injury. Many features had inconsistent results or had not been investigated for either outcome. The findings emphasise the importance of incorporating safety into the conversation about creating more walkable cities.

Policy, Research and Residents' Perspectives on Built Environments Implicated in Heart Disease: A Concept Mapping Approach.

PubMed

Stankov, Ivana; Howard, Natasha J; Daniel, Mark; Cargo, Margaret

2017-02-09

An underrepresentation of stakeholder perspectives within urban health research arguably limits our understanding of what is a multi-dimensional and complex relationship between the built environment and health. By engaging a wide range of stakeholders using a participatory concept mapping approach, this study aimed to achieve a more holistic and nuanced understanding of the built environments shaping disease risk, specifically cardiometabolic risk (CMR). Moreover, this study aimed to ascertain the importance and changeability of identified environments through government action. Through the concept mapping process, community members, researchers, government and non-government stakeholders collectively identified eleven clusters encompassing 102 built environmental domains related to CMR, a number of which are underrepresented within the literature. Among the identified built environments, open space, public transportation and pedestrian environments were highlighted as key targets for policy intervention. Whilst there was substantive convergence in stakeholder groups' perspectives concerning the built environment and CMR, there were disparities in the level of importance government stakeholders and community members respectively assigned to pedestrian environments and street connectivity. These findings support the role of participatory methods in strengthening how urban health issues are understood and in affording novel insights into points of action for public health and policy intervention.

The impact of neighborhood social and built environment factors across the cancer continuum: Current research, methodological considerations, and future directions.

PubMed

Gomez, Scarlett Lin; Shariff-Marco, Salma; DeRouen, Mindy; Keegan, Theresa H M; Yen, Irene H; Mujahid, Mahasin; Satariano, William A; Glaser, Sally L

2015-07-15

Neighborhood social and built environments have been recognized as important contexts in which health is shaped. The authors reviewed the extent to which these neighborhood factors have been addressed in population-level cancer research by scanning the literature for research focused on specific social and/or built environment characteristics and their association with outcomes across the cancer continuum, including incidence, diagnosis, treatment, survivorship, and survival. The commonalities and differences in methodologies across studies, the current challenges in research methodology, and future directions in this research also were addressed. The assessment of social and built environment factors in relation to cancer is a relatively new field, with 82% of the 34 reviewed articles published since 2010. Across the wide range of social and built environment exposures and cancer outcomes considered by the studies, numerous associations were reported. However, the directions and magnitudes of associations varied, in large part because of the variation in cancer sites and outcomes studied, but also likely because of differences in study populations, geographic regions, and, importantly, choice of neighborhood measures and geographic scales. The authors recommend that future studies consider the life-course implications of cancer incidence and survival, integrate secondary and self-report data, consider work neighborhood environments, and further develop analytical and statistical approaches appropriate to the geospatial and multilevel nature of the data. Incorporating social and built environment factors into research on cancer etiology and outcomes can provide insights into disease processes, identify vulnerable populations, and generate results with translational impact of relevance for interventionists and policy makers. © 2015 American Cancer Society.

Parental perception of built environment characteristics and built environment use among Latino families: a cross-sectional study.

PubMed

Heerman, William J; Mitchell, Stephanie J; Thompson, Jessica; Martin, Nina C; Sommer, Evan C; van Bakergem, Margaret; Taylor, Julie Lounds; Buchowski, Maciej S; Barkin, Shari L

2016-11-22

Perception of undesirable features may inhibit built environment use for physical activity among underserved families with children at risk for obesity. To examine the association of perceived availability, condition, and safety of the built environment with its self-reported use for physical activity, we conducted a cross-sectional analysis on baseline data from a randomized controlled trial. Adjusted Poisson regression was used to test the association between the primary independent variables (perceived availability, physical condition, and safety) with the primary outcome of self-reported use of built environment structures. Among 610 parents (90% Latino) of preschool-age children, 158 (26%) reported that there were no available built environment structures for physical activity in the neighborhood. The use of built environment structures was associated with the perceived number of available structures (B = 0.34, 95% CI 0.31, 0.37, p < 0.001) and their perceived condition (B = 0.19, 95% CI 0.12, 0.27, p = 0.001), but not with perceived safety (B = 0.00, 95% CI -0.01, 0.01, p = 0.7). In this sample of underserved families, perceived availability and condition of built environment structures were associated with use rather than perceived safety. To encourage physical activity among underserved families, communities need to invest in the condition and availability of built environment structures. Registered at ClinicalTrials.gov ( NCT01316653 ) on March 11, 2011.

Built-up Al-Li structures for cryogenic tank and dry bay applications

NASA Technical Reports Server (NTRS)

Lisagor, W. Barry

1993-01-01

The objectives are: (1) to demonstrate the cost benefits of built-up cryotank and dry bay structures; (2) to study of benefits of using Al alloys; (3) to study of benefit of using Al-Li alloys; (4) to evaluate alternative low-cost stiffener and joining concepts.

Design in the Classroom: Exploring the Built Environment.

ERIC Educational Resources Information Center

Maine Arts Commission, Augusta.

Design and the built environment are subjects of concern to Maine communities. State mandated town planning, new school construction, and the Department of Transportation plans to rebuild roads and bridges elicit public discussion. The study of design encourages elementary students to enter this public forum as informed citizens. The study of…

BENCH-SCALE STUDIES ON THE SIMULTANEOUS FORMATION OF PCBS AND PCDDS/FS FROM COMBUSTION SYSTEMS

EPA Science Inventory

The paper reports on a bench-scale experimental study to characterize a newly built reactor system that was built to: produce levels and distributions of polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran (PCDD/F) production similar to those achieved by previous re...

Design and testing of prototype handheld scanning probes for optical coherence tomography

PubMed Central

Demian, Dorin; Sinescu, Cosmin; Negrutiu, Meda Lavinia; Cernat, Ramona; Topala, Florin Ionel; Hutiu, Gheorghe; Bradu, Adrian; Podoleanu, Adrian Gh

2014-01-01

Three simple and low-cost configurations of handheld scanning probes for optical coherence tomography have been developed. Their design and testing for dentistry applications are presented. The first two configurations were built exclusively from available off-the-shelf optomechanical components, which, to the best of our knowledge, are the first designs of this type. The third configuration includes these components in an optimized and ergonomic probe. All the designs are presented in detail to allow for their duplication in any laboratory with a minimum effort, for applications that range from educational to high-end clinical investigations. Requirements that have to be fulfilled to achieve configurations which are reliable, ergonomic—for clinical environments, and easy to build are presented. While a range of applications is possible for the prototypes developed, in this study the handheld probes are tested ex vivo with a spectral domain optical coherence tomography system built in-house, for dental constructs. A previous testing with a swept source optical coherence tomography system has also been performed both in vivo and ex vivo for ear, nose, and throat—in a medical environment. The applications use the capability of optical coherence tomography to achieve real-time, high-resolution, non-contact, and non-destructive interferometric investigations with micrometer resolutions and millimeter penetration depth inside the sample. In this study, testing the quality of the material of one of the most used types of dental prosthesis, metalo-ceramic is thus demonstrated. PMID:25107512

Design and testing of prototype handheld scanning probes for optical coherence tomography.

PubMed

Demian, Dorin; Duma, Virgil-Florin; Sinescu, Cosmin; Negrutiu, Meda Lavinia; Cernat, Ramona; Topala, Florin Ionel; Hutiu, Gheorghe; Bradu, Adrian; Podoleanu, Adrian Gh

2014-08-01

Three simple and low-cost configurations of handheld scanning probes for optical coherence tomography have been developed. Their design and testing for dentistry applications are presented. The first two configurations were built exclusively from available off-the-shelf optomechanical components, which, to the best of our knowledge, are the first designs of this type. The third configuration includes these components in an optimized and ergonomic probe. All the designs are presented in detail to allow for their duplication in any laboratory with a minimum effort, for applications that range from educational to high-end clinical investigations. Requirements that have to be fulfilled to achieve configurations which are reliable, ergonomic-for clinical environments, and easy to build are presented. While a range of applications is possible for the prototypes developed, in this study the handheld probes are tested ex vivo with a spectral domain optical coherence tomography system built in-house, for dental constructs. A previous testing with a swept source optical coherence tomography system has also been performed both in vivo and ex vivo for ear, nose, and throat-in a medical environment. The applications use the capability of optical coherence tomography to achieve real-time, high-resolution, non-contact, and non-destructive interferometric investigations with micrometer resolutions and millimeter penetration depth inside the sample. In this study, testing the quality of the material of one of the most used types of dental prosthesis, metalo-ceramic is thus demonstrated. © IMechE 2014.

Comparing the appropriate geographic region for assessing built environmental correlates with walking trips using different metrics and model approaches

PubMed Central

Tribby, Calvin P.; Miller, Harvey J.; Brown, Barbara B.; Smith, Ken R.; Werner, Carol M.

2017-01-01

There is growing international evidence that supportive built environments encourage active travel such as walking. An unsettled question is the role of geographic regions for analyzing the relationship between the built environment and active travel. This paper examines the geographic region question by assessing walking trip models that use two different regions: walking activity spaces and self-defined neighborhoods. We also use two types of built environment metrics, perceived and audit data, and two types of study design, cross-sectional and longitudinal, to assess these regions. We find that the built environment associations with walking are dependent on the type of metric and the type of model. Audit measures summarized within walking activity spaces better explain walking trips compared to audit measures within self-defined neighborhoods. Perceived measures summarized within self-defined neighborhoods have mixed results. Finally, results differ based on study design. This suggests that results may not be comparable among different regions, metrics and designs; researchers need to consider carefully these choices when assessing active travel correlates. PMID:28237743

Place-focused physical activity research, human agency, and social justice in public health: taking agency seriously in studies of the built environment.

PubMed

Blacksher, Erika; Lovasi, Gina S

2012-03-01

Built environment characteristics have been linked to health outcomes and health disparities. However, the effects of an environment on behavior may depend on human perception, interpretation, motivation, and other forms of human agency. We draw on epidemiological and ethical concepts to articulate a critique of research on the built environment and physical activity. We identify problematic assumptions and enumerate both scientific and ethical reasons to incorporate subjective perspectives and public engagement strategies into built environment research and interventions. We maintain that taking agency seriously is essential to the pursuit of health equity and the broader demands of social justice in public health, an important consideration as studies of the built environment and physical activity increasingly focus on socially disadvantaged communities. Attention to how people understand their environment and navigate competing demands can improve the scientific value of ongoing efforts to promote active living and health, while also better fulfilling our ethical obligations to the individuals and communities whose health we strive to protect. Copyright © 2011 Elsevier Ltd. All rights reserved.

Low cost and compact quantum key distribution

NASA Astrophysics Data System (ADS)

Duligall, J. L.; Godfrey, M. S.; Harrison, K. A.; Munro, W. J.; Rarity, J. G.

2006-10-01

We present the design of a novel free-space quantum cryptography system, complete with purpose-built software, that can operate in daylight conditions. The transmitter and receiver modules are built using inexpensive off-the-shelf components. Both modules are compact allowing the generation of renewed shared secrets on demand over a short range of a few metres. An analysis of the software is shown as well as results of error rates and therefore shared secret yields at varying background light levels. As the system is designed to eventually work in short-range consumer applications, we also present a use scenario where the consumer can regularly 'top up' a store of secrets for use in a variety of one-time-pad (OTP) and authentication protocols.

New single-aircraft integrated atmospheric observation capabilities

NASA Astrophysics Data System (ADS)

Wang, Z.

2011-12-01

Improving current weather and climate model capabilities requires better understandings of many atmospheric processes. Thus, advancing atmospheric observation capabilities has been regarded as the highest imperatives to advance the atmospheric science in the 21st century. Under the NSF CAREER support, we focus on developing new airborne observation capabilities through the developments of new instrumentations and the single-aircraft integration of multiple remote sensors with in situ probes. Two compact Wyoming cloud lidars were built to work together with a 183 GHz microwave radiometer, a multi-beam Wyoming cloud radar and in situ probes for cloud studies. The synergy of these remote sensor measurements allows us to better resolve the vertical structure of cloud microphysical properties and cloud scale dynamics. Together with detailed in situ data for aerosol, cloud, water vapor and dynamics, we developed the most advanced observational capability to study cloud-scale properties and processes from a single aircraft (Fig. 1). A compact Raman lidar was also built to work together with in situ sampling to characterize boundary layer aerosol and water vapor distributions for many important atmospheric processes studies, such as, air-sea interaction and convective initialization. Case studies will be presented to illustrate these new observation capabilities.

The Elastic Behaviour of Sintered Metallic Fibre Networks: A Finite Element Study by Beam Theory

PubMed Central

Bosbach, Wolfram A.

2015-01-01

Background The finite element method has complimented research in the field of network mechanics in the past years in numerous studies about various materials. Numerical predictions and the planning efficiency of experimental procedures are two of the motivational aspects for these numerical studies. The widespread availability of high performance computing facilities has been the enabler for the simulation of sufficiently large systems. Objectives and Motivation In the present study, finite element models were built for sintered, metallic fibre networks and validated by previously published experimental stiffness measurements. The validated models were the basis for predictions about so far unknown properties. Materials and Methods The finite element models were built by transferring previously published skeletons of fibre networks into finite element models. Beam theory was applied as simplification method. Results and Conclusions The obtained material stiffness isn’t a constant but rather a function of variables such as sample size and boundary conditions. Beam theory offers an efficient finite element method for the simulated fibre networks. The experimental results can be approximated by the simulated systems. Two worthwhile aspects for future work will be the influence of size and shape and the mechanical interaction with matrix materials. PMID:26569603

Numerical analysis and experimental research of the rubber boot of the joint drive vehicle

NASA Astrophysics Data System (ADS)

Ziobro, Jan

2016-04-01

The article presents many numerical studies and experimental research of the drive rubber boot of the joint drive vehicle. Performance requirements have been discussed and the required coefficients of the mathematical model for numerical simulation have been determined. The behavior of living in MSC.MARC environment was examined. In the analysis the following have been used: hyperplastic two-parameter model of the Mooney-Rivlin material, large displacements procedure, safe contact condition, friction on the sides of the boots. 3D numerical model of the joint bootwas analyzed under influence of the forces: tensile, compressive, centrifugal and angular. Numerous results of studies have been presented. An appropriate test stand was built and comparison of the results of the numerical analysis and the results of experimental studies was made. Numerous requests and recommendations for utilitarian character have been presented.

Single-grid spectral collocation for the Navier-Stokes equations

NASA Technical Reports Server (NTRS)

Bernardi, Christine; Canuto, Claudio; Maday, Yvon; Metivet, Brigitte

1988-01-01

The aim of the paper is to study a collocation spectral method to approximate the Navier-Stokes equations: only one grid is used, which is built from the nodes of a Gauss-Lobatto quadrature formula, either of Legendre or of Chebyshev type. The convergence is proven for the Stokes problem provided with inhomogeneous Dirichlet conditions, then thoroughly analyzed for the Navier-Stokes equations. The practical implementation algorithm is presented, together with numerical results.

Characterization of Rotating Detonation Engine Exhaust Through Nozzle Guide Vanes

DTIC Science & Technology

2013-03-21

THROUGH NOZZLE GUIDE VANES THESIS Presented to the Faculty Department of Aeronautics and Astronautics Graduate School of Engineering and Management Air...the first Nozzle Guide Vane (NGV) section from a T63 gas turbine engine to a 6 inch diameter RDE was designed and built for this study. Pressure...CHARACTERIZATION OF ROTATING DETONATION ENGINE EXHAUST THROUGH NOZZLE GUIDE VANES THESIS Nick D. DeBarmore, Second Lieutenant, USAF AFIT/GAE/ENY/13

Self-Efficacy and Its Relationship with Social Skills and the Quality of Decision-Making among the Students of Prince Sattam Bin Abdul-Aziz University

ERIC Educational Resources Information Center

Al-mehsin, Salama Aqeel

2017-01-01

The present study aimed to reveal the self-efficacy and social skills and their relationship to the quality of decision-making at Prince Sattam bin Abdulaziz University students, and determine the extent of the contribution of self-efficacy and social skills to the quality of decision-making. To achieve this, a questionnaire was built to identify…

To Build a Better School.

ERIC Educational Resources Information Center

Little Hoover Commission, Sacramento, CA.

This report presents findings and recommendations of the Little Hoover Commission regarding California's efforts to provide schools that are economically built, adequate, safe, and well maintained. Findings and recommendations are presented in the following areas: school facility building and maintenance; leadership needs in managing construction…

Residual stress measurements via neutron diffraction of additive manufactured stainless steel 17-4 PH.

PubMed

Masoomi, Mohammad; Shamsaei, Nima; Winholtz, Robert A; Milner, Justin L; Gnäupel-Herold, Thomas; Elwany, Alaa; Mahmoudi, Mohamad; Thompson, Scott M

2017-08-01

Neutron diffraction was employed to measure internal residual stresses at various locations along stainless steel (SS) 17-4 PH specimens additively manufactured via laser-powder bed fusion (L-PBF). Of these specimens, two were rods (diameter=8 mm, length=80 mm) built vertically upward and one a parallelepiped (8×80×9 mm 3 ) built with its longest edge parallel to ground. One rod and the parallelepiped were left in their as-built condition, while the other rod was heat treated. Data presented provide insight into the microstructural characteristics of typical L-PBF SS 17-4 PH specimens and their dependence on build orientation and post-processing procedures such as heat treatment. Data have been deposited in the Data in Brief Dataverse repository (doi:10.7910/DVN/T41S3V).

As- built inventory of the office building with the use of terrestrial laser scanning

NASA Astrophysics Data System (ADS)

Przyborski, Marek; Tysiąc, Paweł

2018-01-01

Terrestrial Laser Scanning (TLS) is an efficient tool for building inventories. Based on the red- laser beam technology it is possible to provide the high accuracy data with complete spatial information about a scanned object. In this article, authors present the solution of use a TLS in as-built inventory of the office building. Based on the provided data, it is possible to evaluate the correctness of built details of a building and provide information for further construction works, for example an area needed for Styrofoam installation. The biggest problem in this research is that an error which equals over 1cm could generate costs, which could be a problem to cover by a constructor. Based on a complicated place of the construction works (centre of a city) it was a challenge to maintain the accuracy.

Predicting Error Bars for QSAR Models

NASA Astrophysics Data System (ADS)

Schroeter, Timon; Schwaighofer, Anton; Mika, Sebastian; Ter Laak, Antonius; Suelzle, Detlev; Ganzer, Ursula; Heinrich, Nikolaus; Müller, Klaus-Robert

2007-09-01

Unfavorable physicochemical properties often cause drug failures. It is therefore important to take lipophilicity and water solubility into account early on in lead discovery. This study presents log D7 models built using Gaussian Process regression, Support Vector Machines, decision trees and ridge regression algorithms based on 14556 drug discovery compounds of Bayer Schering Pharma. A blind test was conducted using 7013 new measurements from the last months. We also present independent evaluations using public data. Apart from accuracy, we discuss the quality of error bars that can be computed by Gaussian Process models, and ensemble and distance based techniques for the other modelling approaches.

[DESCRIPTION AND PRESENTATION OF THE RESULTS OF ELECTROENCEPHALOGRAM PROCESSING USING AN INFORMATION MODEL].

PubMed

Myznikov, I L; Nabokov, N L; Rogovanov, D Yu; Khankevich, Yu R

2016-01-01

The paper proposes to apply the informational modeling of correlation matrix developed by I.L. Myznikov in early 1990s in neurophysiological investigations, such as electroencephalogram recording and analysis, coherence description of signals from electrodes on the head surface. The authors demonstrate information models built using the data from studies of inert gas inhalation by healthy human subjects. In the opinion of the authors, information models provide an opportunity to describe physiological processes with a high level of generalization. The procedure of presenting the EEG results holds great promise for the broad application.

Understanding Physical Activity through Interactions Between the Built Environment and Social Cognition: A Systematic Review.

PubMed

Rhodes, Ryan E; Saelens, Brian E; Sauvage-Mar, Claire

2018-05-16

Few people in most developed nations engage in regular physical activity (PA), despite its well-established health benefits. Socioecological models highlight the potential interaction of multiple factors from policy and the built environment to individual social cognition in explaining PA. The purpose of this review was to appraise this interaction tenet of the socioecological model between the built environment and social cognition to predict PA. Eligible studies had to have been published in peer-reviewed journals in the English language, and included any tests of interaction between social cognition and the built environment with PA. Literature searches, concluded in October 2017, used five common databases. Findings were grouped by type of PA outcomes (leisure, transportation, total PA and total moderate-vigorous PA [MVPA]), then grouped by the type of interactions between social cognitive and built environment constructs. The initial search yielded 308 hits, which was reduced to 22 independent studies of primarily high- to medium-quality after screening for eligibility criteria. The interaction tenet of the socioecological model was not supported for overall MVPA and total PA. By contrast, while there was heterogeneity of findings for leisure-time PA, environmental accessibility/convenience interacted with intention, and environmental aesthetics interacted with affective judgments, to predict leisure-time PA. Interactions between the built environment and social cognition in PA for transport are limited, with current results failing to support an effect. The results provide some support for interactive aspects of the built environment and social cognition in leisure-time PA, and thus highlight potential areas for integrated intervention of individual and environmental change.

Built-up land mapping capabilities of the ASTER and Landsat ETM+ sensors in coastal areas of southeastern China

NASA Astrophysics Data System (ADS)

Xu, Hanqiu; Huang, Shaolin; Zhang, Tiejun

2013-10-01

Worldwide urbanization has accelerated expansion of urban built-up lands and resulted in substantial negative impacts on the global environments. Precisely measuring the urban sprawl is becoming an increasing need. Among the satellite-based earth observation systems, the Landsat and ASTER data are most suitable for mesoscale measurements of urban changes. Nevertheless, to date the difference in the capability of mapping built-up land between the two sensors is not clear. Therefore, this study compared the performances of the Landsat-7 ETM+ and ASTER sensors for built-up land mapping in the coastal areas of southeastern China. The comparison was implemented on three date-coincident image pairs and achieved by using three approaches, including per-band-based, index-based, and classification-based comparisons. The index used is the Index-based Built-up Index (IBI), while the classification algorithm employed is the Support Vector Machine (SVM). Results show that in the study areas, ETM+ and ASTER have an overall similar performance in built-up land mapping but also differ in several aspects. The IBI values determined from ASTER were consistently higher than from ETM+ by up to 45.54% according to percentage difference. The ASTER also estimates more built-up land area than ETM+ by 5.9-6.3% estimated with the IBI-based approach or 3.9-6.1% with the SVM classification. The differences in the spectral response functions and spatial resolution between relative spectral bands of the two sensors are attributed to these different performances.

Typology of person-environment fit constellations: a platform addressing accessibility problems in the built environment for people with functional limitations.

PubMed

Slaug, Björn; Schilling, Oliver; Iwarsson, Susanne; Carlsson, Gunilla

2015-09-02

Making the built environment accessible for all regardless of functional capacity is an important goal for public health efforts. Considerable impediments to achieving this goal suggest the need for valid measurements of acccessibility and for greater attention to the complexity of person-environment fit issues. To address these needs, this study aimed to provide a methodological platform, useful for further research and instrument development within accessibility research. This was accomplished by the construction of a typology of problematic person-environment fit constellations, utilizing an existing methodology developed to assess and analyze accessibility problems in the built environment. By means of qualitative review and statistical methods we classified the person-environment fit components covered by an existing application which targets housing accessibility: the Housing Enabler (HE) instrument. The International Classification of Functioning, Disability and Health (ICF) was used as a conceptual framework. Qualitative classification principles were based on conceptual similarities and for quantitative analysis of similarities, Principal Component Analysis was carried out. We present a typology of problematic person-environment fit constellations classified along three dimensions: 1) accessibility problem range and severity 2) aspects of functioning 3) environmental context. As a result of the classification of the HE components, 48 typical person-environment fit constellations were recognised. The main contribution of this study is the proposed typology of person-environment fit constellations. The typology provides a methodological platform for the identification and quantification of problematic person-environment fit constellations. Its link to the globally accepted ICF classification system facilitates communication within the scientific and health care practice communities. The typology also highlights how relations between aspects of functioning and physical environmental barriers generate typical accessibility problems, and thereby furnishes a reference point for research oriented to how the built environment may be designed to be supportive for activity, participation and health.

ATTRIBUTES OF FORM IN THE BUILT ENVIRONMENT THAT INFLUENCE PERCEIVED WALKABILITY.

PubMed

Oreskovic, Nicolas M; Charles, Pablina Roth Suzanne Lanyi; Shepherd, Dido Tsigaridi Kathrine; Nelson, Kerrie P; Bar, Moshe

2014-01-01

A recent focus of design and building regulations, including form-based codes and the Leadership in Energy and Environmental Design for Neighborhood Development rating system, has been on promoting pedestrian activity. This study assessed perceptions of walkability for residential and commercial streetscapes with different design attributes in order to inform form-based regulations and codes that aim to impact walkability. We scored 424 images on four design attributes purported to influence walkability: variation in building height, variation in building plane, presence of ground-floor windows, and presence of a street focal point. We then presented the images to 45 adults, who were asked to rate the images for walkability. The results showed that perceived walkability varied according to the degree to which a particular design attribute was present, with the presence of ground-floor windows and a street focal point most consistently associated with a space's perceived walkability. Understanding if and which design attributes are most related to walkability could allow planners and developers to focus on the most salient built-environment features influencing physical activity, as well as provide empirical scientific evidence for form-based regulations and zoning codes aimed at impacting walkabilit.

Grumman OV-1C in hangar

NASA Technical Reports Server (NTRS)

1983-01-01

Grumman OV-1C in the hangar used at the time by the Army at Edwards Air Force Base. This OV-1C Mohawk, serial #67-15932, was used in a joint NASA/US Army Aviation Engineering Flight Activity (USAAEFA) program to study a stall-speed warning system in the early 1980s. NASA designed and built an automated stall-speed warning system which presented both airspeed and stall speed to the pilot. Visual indication of impending stall would be displayed to the pilot as a cursor or pointer located on a conventional airspeed indicator. In addition, an aural warning at predetermined stall margins was presented to the pilot through a voice synthesizer. The Mohawk was developed by Grumman Aircraft as a photo observation and electronic reconnaissance aircraft for the US Marines and the US Army. The OV-1 entered production in October 1959 and served the US Army in Europe, Korea, the Viet Nam War, Central and South America, Alaska, and during Desert Shield/Desert Storm in the Middle East. The Mohawk was retired from service in September 1996. 133 OV-1Cs were built, the 'C' designating the model which used an IR (infrared) imaging system to provide reconnaissance.

Real-time and rapid detection of Salmonella Typhimurium using an inexpensive lab-built surface plasmon resonance setup

NASA Astrophysics Data System (ADS)

Lukose, Jijo; Shetty, Vignesh; Ballal, Mamatha; Chidangil, Santhosh; Sinha, Rajeev K.

2018-07-01

Cost-effective diagnostic platforms for rapid pathogen detection are always incumbent in both developing and developed worlds. However, exorbitant diagnostic expenses and the inability to detect pathogens early are a matter of concern for the sustainability and affordability of healthcare devices, which are crucial for deciding how to provide healthcare solutions to the masses, especially in developing countries. Herein, we present the rapid and real-time detection of Salmonella Typhimurium using an inexpensive lab-built surface plasmon resonance (SPR) imaging set up. Pathogen detection is accomplished with the aid of a monoclonal antibody immobilized on a 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide): N-hydroxysuccinimide-modified self-assembled monolayer covalently bonded to a Au thin film. Successful pathogen detection is performed at two concentrations, ~1.5  ×  108 and ~1  ×  106 cfu ml‑1, in phosphate-buffered saline solution. The developed system is capable of detecting bacterial cells within 6–7 min after their injection into the SPR sensor surface. The present study reveals a cost-effective device having high potential for pathogen detection without any labelling tags.

Design of a multi-spectral imager built using the compressive sensing single-pixel camera architecture

NASA Astrophysics Data System (ADS)

McMackin, Lenore; Herman, Matthew A.; Weston, Tyler

2016-02-01

We present the design of a multi-spectral imager built using the architecture of the single-pixel camera. The architecture is enabled by the novel sampling theory of compressive sensing implemented optically using the Texas Instruments DLP™ micro-mirror array. The array not only implements spatial modulation necessary for compressive imaging but also provides unique diffractive spectral features that result in a multi-spectral, high-spatial resolution imager design. The new camera design provides multi-spectral imagery in a wavelength range that extends from the visible to the shortwave infrared without reduction in spatial resolution. In addition to the compressive imaging spectrometer design, we present a diffractive model of the architecture that allows us to predict a variety of detailed functional spatial and spectral design features. We present modeling results, architectural design and experimental results that prove the concept.

High speed systems for time-resolved experiments with synchrotron radiation

NASA Astrophysics Data System (ADS)

Koziol, Anna; Maj, Piotr

2018-02-01

The UFXC32k is a single photon counting hybrid pixel detector with 75 μm pixel pitch. It was designed to cope with high X-ray intensities and therefore it is a very good candiate for synchrotron applications. In order to use this detector in an application, a dedicated setup must be designed and built allowing proper operation of the detector within the experiment. The paper presents two setups built for the purpose of Pump-Probe-Probe experiments at the Synchrotron SOLEIL and XPCS experiments at the APS.

Built-up outer wall and roofing sections for double walled envelope homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brodhead, B.

1980-01-01

A site built system that uses the inner envelope wall is described. Blocking and vertical nailers are attached to this wall and sheathed with foil faced drywall to create the envelope cavity. An outer layer of 3 1/2 in. of Expended Poly Styrene provides continuous solid insulation. The trusses are also sheathed in foil faced drywall and insulated with 5 1/2 in. of E.P.S. This effectively surrounds the building with a continuous vapor and infiltration barrier. Construction details as well as cost breakdowns are presented.

Spatiotemporal Changes of Built-Up Land Expansion and Carbon Emissions Caused by the Chinese Construction Industry.

PubMed

Chuai, Xiaowei; Huang, Xianjin; Lu, Qinli; Zhang, Mei; Zhao, Rongqin; Lu, Junyu

2015-11-03

China is undergoing rapid urbanization, enlarging the construction industry, greatly expanding built-up land, and generating substantial carbon emissions. We calculated both the direct and indirect carbon emissions from energy consumption (anthropogenic emissions) in the construction sector and analyzed built-up land expansion and carbon storage losses from the terrestrial ecosystem. According to our study, the total anthropogenic carbon emissions from the construction sector increased from 3,905×10(4) to 103,721.17×10(4) t from 1995 to 2010, representing 27.87%-34.31% of the total carbon emissions from energy consumption in China. Indirect carbon emissions from other industrial sectors induced by the construction sector represented approximately 97% of the total anthropogenic carbon emissions of the sector. These emissions were mainly concentrated in seven upstream industry sectors. Based on our assumptions, built-up land expansion caused 3704.84×10(4) t of carbon storage loss from vegetation between 1995 and 2010. Cropland was the main built-up land expansion type across all regions. The study shows great regional differences. Coastal regions showed dramatic built-up land expansion, greater carbon storage losses from vegetation, and greater anthropogenic carbon emissions. These regional differences were the most obvious in East China followed by Midsouth China. These regions are under pressure for strong carbon emissions reduction.

A framework for stakeholder identification in concept mapping and health research: a novel process and its application to older adult mobility and the built environment.

PubMed

Schiller, Claire; Winters, Meghan; Hanson, Heather M; Ashe, Maureen C

2013-05-02

Stakeholders, as originally defined in theory, are groups or individual who can affect or are affected by an issue. Stakeholders are an important source of information in health research, providing critical perspectives and new insights on the complex determinants of health. The intersection of built and social environments with older adult mobility is an area of research that is fundamentally interdisciplinary and would benefit from a better understanding of stakeholder perspectives. Although a rich body of literature surrounds stakeholder theory, a systematic process for identifying health stakeholders in practice does not exist. This paper presents a framework of stakeholders related to older adult mobility and the built environment, and further outlines a process for systematically identifying stakeholders that can be applied in other health contexts, with a particular emphasis on concept mapping research. Informed by gaps in the relevant literature we developed a framework for identifying and categorizing health stakeholders. The framework was created through a novel iterative process of stakeholder identification and categorization. The development entailed a literature search to identify stakeholder categories, representation of identified stakeholders in a visual chart, and correspondence with expert informants to obtain practice-based insight. The three-step, iterative creation process progressed from identifying stakeholder categories, to identifying specific stakeholder groups and soliciting feedback from expert informants. The result was a stakeholder framework comprised of seven categories with detailed sub-groups. The main categories of stakeholders were, (1) the Public, (2) Policy makers and governments, (3) Research community, (4) Practitioners and professionals, (5) Health and social service providers, (6) Civil society organizations, and (7) Private business. Stakeholders related to older adult mobility and the built environment span many disciplines and realms of practice. Researchers studying this issue may use the detailed stakeholder framework process we present to identify participants for future projects. Health researchers pursuing stakeholder-based projects in other contexts are encouraged to incorporate this process of stakeholder identification and categorization to ensure systematic consideration of relevant perspectives in their work.

A framework for stakeholder identification in concept mapping and health research: a novel process and its application to older adult mobility and the built environment

PubMed Central

2013-01-01

Background Stakeholders, as originally defined in theory, are groups or individual who can affect or are affected by an issue. Stakeholders are an important source of information in health research, providing critical perspectives and new insights on the complex determinants of health. The intersection of built and social environments with older adult mobility is an area of research that is fundamentally interdisciplinary and would benefit from a better understanding of stakeholder perspectives. Although a rich body of literature surrounds stakeholder theory, a systematic process for identifying health stakeholders in practice does not exist. This paper presents a framework of stakeholders related to older adult mobility and the built environment, and further outlines a process for systematically identifying stakeholders that can be applied in other health contexts, with a particular emphasis on concept mapping research. Methods Informed by gaps in the relevant literature we developed a framework for identifying and categorizing health stakeholders. The framework was created through a novel iterative process of stakeholder identification and categorization. The development entailed a literature search to identify stakeholder categories, representation of identified stakeholders in a visual chart, and correspondence with expert informants to obtain practice-based insight. Results The three-step, iterative creation process progressed from identifying stakeholder categories, to identifying specific stakeholder groups and soliciting feedback from expert informants. The result was a stakeholder framework comprised of seven categories with detailed sub-groups. The main categories of stakeholders were, (1) the Public, (2) Policy makers and governments, (3) Research community, (4) Practitioners and professionals, (5) Health and social service providers, (6) Civil society organizations, and (7) Private business. Conclusions Stakeholders related to older adult mobility and the built environment span many disciplines and realms of practice. Researchers studying this issue may use the detailed stakeholder framework process we present to identify participants for future projects. Health researchers pursuing stakeholder-based projects in other contexts are encouraged to incorporate this process of stakeholder identification and categorization to ensure systematic consideration of relevant perspectives in their work. PMID:23639179

Fuzzy net present valuation based on risk assessment of Malaysian infrastructure

NASA Astrophysics Data System (ADS)

Shaffie, Siti Salihah; Jaaman, Saiful Hafizah; Mohamad, Daud

2017-04-01

In recent years, built-operate-transfer (BOT) projects have profoundly been accepted under project financing for infrastructure developments in many countries. It requires high financing and involves complex mutual risk. The assessment of the risks is vital to avert huge financial loss. Net present value is widely applied to BOT project where the uncertainties in cash flows are deemed to be deterministic values. This study proposed a fuzzy net present value model taking consideration the assessment of risks from the BOT project. The proposed model is adopted to provide more flexible net present valuation of the project. It is shown and proven that the improved fuzzy cash flow model will provide a valuation that is closed to the real value of the project.

The effects of built environment attributes on physical activity-related health and health care costs outcomes in Australia.

PubMed

Zapata-Diomedi, Belen; Herrera, Ana Maria Mantilla; Veerman, J Lennert

2016-11-01

Attributes of the built environment can positively influence physical activity of urban populations, which results in health and economic benefits. In this study, we derived scenarios from the literature for the association built environment-physical activity and used a mathematical model to translate improvements in physical activity to health-adjusted life years and health care costs. We modelled 28 scenarios representing a diverse range of built environment attributes including density, diversity of land use, availability of destinations, distance to transit, design and neighbourhood walkability. Our results indicated potential health gains in 24 of the 28 modelled built environment attributes. Health care cost savings due to prevented physical activity-related diseases ranged between A$1300 to A$105,355 per 100,000 adults per year. On the other hand, additional health care costs of prolonged life years attributable to improvements in physical activity were nearly 50% higher than the estimated health care costs savings. Our results give an indication of the potential health benefits of investing in physical activity-friendly built environments. Copyright © 2016 Elsevier Ltd. All rights reserved.

Online system for knowledge assessment enhances students' results on school knowledge test.

PubMed

Kralj, Benjamin; Glazar, Sasa Aleksej

2013-01-01

Variety of online tools were built to help assessing students' performance in school. Many teachers changed their methods of assessment from paper-and-pencil (P&P) to online systems. In this study we analyse the influence that using an online system for knowledge assessment has on students' knowledge. Based on both a literature study and our own research we designed and built an online system for knowledge assessment. The system is evaluated using two groups of primary school teachers and students (N = 686) in Slovenia: an experimental and a control group. Students solved P&P exams on several occasions. The experimental group was allowed to access the system either at school or at home for a limited period during the presentation of a selected school topic. Students in the experimental group were able to solve tasks and compare their own achievements with those of their coevals. A comparison of the P&P school exams results achieved by both groups revealed a positive effect on subject topic comprehension for those with access to the online self-assessment system.

High Dune is First Martian Dune Studied up Close

NASA Image and Video Library

2015-12-10

The rippled surface of the first Martian sand dune ever studied up close fills this view of "High Dune" from the Mast Camera (Mastcam) on NASA's Curiosity rover. This site is part of the "Bagnold Dunes" field along the northwestern flank of Mount Sharp. The dunes are active, migrating up to about one yard or meter per year. The component images of this mosaic view were taken on Nov. 27, 2015, during the 1,176th Martian day, or sol, of Curiosity's work on Mars. The scene is presented with a color adjustment that approximates white balancing, to resemble how the sand would appear under daytime lighting conditions on Earth. The annotated version includes superimposed scale bars of 30 centimeters (1 foot) in the foreground and 100 centimeters (3.3 feet) in the middle distance. Malin Space Science Systems, San Diego, built and operates Curiosity's Mastcam. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena, built the rover and manages the project for NASA's Science Mission Directorate, Washington. http://photojournal.jpl.nasa.gov/catalog/PIA20168

Experimental study of effectiveness of four radon mitigation solutions, based on underground depressurization, tested in prototype housing built in a high radon area in Spain.

PubMed

Frutos Vázquez, Borja; Olaya Adán, Manuel; Quindós Poncela, Luis Santiago; Sainz Fernandez, Carlos; Fuente Merino, Ismael

2011-04-01

The present paper discusses the results of an empirical study of four approaches to reducing indoor radon concentrations based on depressurization techniques in underground sumps. The experiments were conducted in prototype housing built in an area of Spain where the average radon concentration at a depth of 1 m is 250 kBq m(-3). Sump effectiveness was analysed in two locations: underneath the basement, which involved cutting openings into the foundation, ground storey and roof slabs, and outside the basement walls, which entailed digging a pit alongside the building exterior. The effectiveness of both sumps was likewise tested with passive and forced ventilation methods. The systems proved to be highly efficient, lowering radon levels by 91-99%, except in the solution involving passive ventilation and the outside sump, where radon levels were reduced by 53-55%. At wind speeds of over 8 m/s, however, passive ventilation across an outside sump lowered radon levels by 95% due to a Venturi effect induced drop in pressure. Copyright © 2011 Elsevier Ltd. All rights reserved.

Performance of the first structure built with high performance concrete in Virginia.

DOT National Transportation Integrated Search

2001-08-01

This study evaluated the preparation and placement operations, concrete properties, cost-effectiveness, and performance over 5 years of the first bridge containing high performance concrete built by the Virginia Department of Transportation. High per...

Imaging spectrometry of the Earth and other solar system bodies

NASA Technical Reports Server (NTRS)

Vane, Gregg

1993-01-01

Imaging spectrometry is a relatively new tool for remote sensing of the Earth and other bodies of the solar system. The technique dates back to the late 1970's and early 1980's. It is a natural extension of the earlier multi-spectral imagers developed for remote sensing that acquire images in a few, usually broad spectral bands. Imaging spectrometers combine aspects of classical spectrometers and imaging systems, making it possible to acquire literally hundreds of images of an object, each image in a separate, narrow spectral band. It is thus possible to perform spectroscopy on a pixel-by-pixel basis with the data acquired with an imaging spectrometer. Two imaging spectrometers have flown in space and several others are planned for future Earth and planetary missions. The French-built Phobos Infrared Spectrometer (ISM) was part of the payload of the Soviet Mars mission in 1988, and the JPL-built Near Infrared Mapping Spectrometer (NIMS) is currently en route to Jupiter aboard the Galileo spacecraft. Several airborne imaging spectrometers have been built in the past decade including the JPL-built Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) which is the only such sensor that covers the full solar reflected portion of the spectrum in narrow, contiguous spectral bands. NASA plans two imaging spectrometers for its Earth Observing System, the Moderate and the High Resolution Imaging Spectrometers (MODIS and HIRIS). A brief overview of the applications of imaging spectrometry to Earth science will be presented to illustrate the value of the tool to remote sensing and indicate the types of measurements that are required. The system design for AVIRS and a planetary imaging spectrometer will be presented to illustrate the engineering considerations and challenges that must be met in building such instruments. Several key sensor technology areas will be discussed in which miniaturization and/or enhanced performance through micromachining and nanofabrication may allow smaller, more robust, and more capable imaging spectrometers to be built in the future.

The READY program: Building a global potential energy surface and reactive dynamic simulations for the hydrogen combustion.

PubMed

Mogo, César; Brandão, João

2014-06-30

READY (REActive DYnamics) is a program for studying reactive dynamic systems using a global potential energy surface (PES) built from previously existing PESs corresponding to each of the most important elementary reactions present in the system. We present an application to the combustion dynamics of a mixture of hydrogen and oxygen using accurate PESs for all the systems involving up to four oxygen and hydrogen atoms. Results at the temperature of 4000 K and pressure of 2 atm are presented and compared with model based on rate constants. Drawbacks and advantages of this approach are discussed and future directions of research are pointed out. Copyright © 2014 Wiley Periodicals, Inc.

Lock and Dam Number 1 Hydropower Study, Mississippi River at Minneapolis-St. Paul, Minnesota.

DTIC Science & Technology

1984-10-01

the Ford Motor Company owns and operates the hydro plant. This study shows that an additional powerplant can be built at the project that will more...powerplant is presently owned and operated by the Ford Motor Company under FERC Licence No. 362. The plant operates in a run-of-river mode because the... Company or the Corps is transmitted to Northern States Power Company . 2 2-1 0 r 7.-...i • " . 4, " K27 4 a ,.N -’’ , 4 b - ,d ,..._ Fiur 2

Adaptive antenna arrays for satellite communication

NASA Technical Reports Server (NTRS)

Gupta, Inder J.

1989-01-01

The feasibility of using adaptive antenna arrays to provide interference protection in satellite communications was studied. The feedback loops as well as the sample matric inversion (SMI) algorithm for weight control were studied. Appropriate modifications in the two were made to achieve the required interference suppression. An experimental system was built to test the modified feedback loops and the modified SMI algorithm. The performance of the experimental system was evaluated using bench generated signals and signals received from TVRO geosynchronous satellites. A summary of results is given. Some suggestions for future work are also presented.

Technical Assistance for the Conservation of Built Heritage at Bagan, Myanmar

NASA Astrophysics Data System (ADS)

Mezzino, D.; Santana Quintero, M.; Ma Pwint, P.; Tin Htut Latt, W.; Rellensmann, C.

2016-06-01

Presenting the outcomes of a capacity building activity, this contribution illustrates a replicable recording methodology to obtain timely, relevant and accurate information about conditions, materials and transformations of heritage structures. The purpose of the presented training activity consisted in developing local capabilities for the documentation of the built heritage at Bagan, Myanmar, employing different IT-supported techniques. Under the Director of UNESCO, the direct supervision of the chief of the culture unit, and in close consultation and cooperation with the Association of Myanmar Architects, the Department of Archaeology National Museum and Library (DoA) a documentation strategy has been developed in order to set up a recording methodology for the over three thousand Bagan monuments. The site, located in central Myanmar, in South East Asia, was developed between the IX and the XIII century as capital of the Myanmar kingdom. In the last years, this outstanding site has been exposed to an increasing number of natural hazards including earthquakes and flooding that strongly affected its built structures. Therefore, a documentation strategy to quickly capture shape, color, geometry and conditions of the monuments, in order to develop proper conservation projects, was needed. The scope of the training activity consisted in setting up a recording strategy updating the existing Bagan inventory, using three Buddhist temples as pilot cases study. The three documented temples were different in size, construction period, conditions and shape. The documentation included several IT-supported techniques including: Electronic Distance Measurements (EDM), SFM Photogrammetry, Laser Scanning, Record Photography as well as hand measurement and field notes. The monuments' surveying has been developed in accordance with the guidelines and standards established by the ICOMOS International Committee for Documentation of Cultural Heritage (CIPA). Recommendations on how to extend the adopted methodology to the other Bagan monuments have been also elaborated.

Improved tsunami impact assessments: validation, comparison and the integration of hydrodynamic modeling

NASA Astrophysics Data System (ADS)

Tarbotton, C.; Walters, R. A.; Goff, J. R.; Dominey-Howes, D.; Turner, I. L.

2012-12-01

As communities become increasingly aware of the risks posed by tsunamis, it is important to develop methods for predicting the damage they can cause to the built environment. This will provide the information needed to make informed decisions regarding land-use, building codes, and evacuation. At present, a number of tsunami-building vulnerability assessment models are available, however, the relative infrequency and destructive nature of tsunamis has long made it difficult to obtain the data necessary to adequately validate and compare them. Further complicating matters is that the inundation of a tsunami in the built environment is very difficult model, as is the response of a building to the hydraulic forces that a tsunami generates. Variations in building design and condition will significantly affect a building's susceptibility to damage. Likewise, factors affecting the flow conditions at a building (i.e. surrounding structures and topography), will greatly affect its exposure. This presents significant challenges for practitioners, as they are often left in the dark on how to use hazard modeling and vulnerability assessment techniques together to conduct the community-scale impact studies required for tsunami planning. This paper presents the results of an in-depth case study of Yuriage, Miyagi Prefecture - a coastal city in Japan that was badly damaged by the 2011 Tohoku tsunami. The aim of the study was twofold: 1) To test and compare existing tsunami vulnerability assessment models and 2) To more effectively utilize hydrodynamic models in the context of tsunami impact studies. Following the 2011 Tohoku event, an unprecedented quantity of field data, imagery and video emerged. Yuriage in particular, features a comprehensive set of street level Google Street View imagery, available both before and after the event. This has enabled the collection of a large dataset describing the characteristics of the buildings existing before the event as well the subsequent damage that they sustained during. These data together with the detailed results from hydrodynamic models have been used to provide the building, damage and hazard data necessary to rigorously test and compare existing vulnerability assessments techniques. The result is a much-improved understanding of the capabilities of existing vulnerability assessment techniques, as well as important improvements to their assessment framework This provides much needed guidance to practitioners on how to conduct tsunami impact assessments in the future. Furthermore, the study introduces some new methods of integrating hydrodynamic models into vulnerability assessment models, offering guidance on how to more effectively model tsunami inundation in the built environment.

Testing Hypothesized Psychosocial Mediators: Lessons Learned in the MassBUILT Study

ERIC Educational Resources Information Center

Okechukwu, Cassandra A.; Krieger, Nancy; Sorensen, Glorian; Li, Yi; Barbeau, Elizabeth M.

2011-01-01

Only a few of the interventions that target blue-collar workers have conducted formal analysis to evaluate the specific attributes of their intervention that are associated with success or failure. This study examined the role of dual hazard and decisional balance in the MassBUILT smoking cessation intervention. The authors conducted sets of…

Learning Biology through Innovative Curricula: A Comparison of Game- and Nongame-Based Approaches

ERIC Educational Resources Information Center

Sadler, Troy D.; Romine, William L.; Menon, Deepika; Ferdig, Richard E.; Annetta, Leonard

2015-01-01

This study explored student learning in the context of innovative biotechnology curricula and the effects of gaming as a central element of the learning experience. The quasi-experimentally designed study compared learning outcomes between two curricular approaches: One built around a computer-based game, and the other built around a narrative…

“Back on Track”: A Mobile App Observational Study Using Apple’s ResearchKit Framework

PubMed Central

Woias, Peter; Suedkamp, Norbert P; Niemeyer, Philipp

2017-01-01

Background In March 2015, Apple Inc announced ResearchKit, a novel open-source framework intended to help medical researchers to easily create apps for medical studies. With the announcement of this framework, Apple presented 5 apps built in a beta phase based on this framework. Objective The objective of this study was to better understand decision making in patients with acute anterior cruciate ligament (ACL) ruptures. Here, we describe the development of a ResearchKit app for this study. Methods A multilanguage observatory study was conducted. At first a suitable research topic, target groups, participating territories, and programming method were carefully identified. The ResearchKit framework was used to program the app. A secure server connection was realized via Secure Sockets Layer. A data storage and security concept separating personal information and study data was proposed. Furthermore, an efficient method to allow multilanguage support and distribute the app in many territories was presented. Ethical implications were considered and taken into account regarding privacy policies. Results An app study based on ResearchKit was developed without comprehensive iPhone Operating System (iOS) development experience. The Apple App Store is a major distribution channel causing significant download rates (>1.200/y) without active recruitment. Preliminary data analysis showed moderate dropout rates and a good quality of data. A total of 180 participants were currently enrolled with 107 actively participating and producing 424 completed surveys in 9 out of 24 months. Conclusions ResearchKit is an easy-to-use framework and powerful tool to create medical studies. Advantages are the modular built, the extensive reach of iOS devices, and the convenient programming environment. PMID:28246069

"Back on Track": A Mobile App Observational Study Using Apple's ResearchKit Framework.

PubMed

Zens, Martin; Woias, Peter; Suedkamp, Norbert P; Niemeyer, Philipp

2017-02-28

In March 2015, Apple Inc announced ResearchKit, a novel open-source framework intended to help medical researchers to easily create apps for medical studies. With the announcement of this framework, Apple presented 5 apps built in a beta phase based on this framework. The objective of this study was to better understand decision making in patients with acute anterior cruciate ligament (ACL) ruptures. Here, we describe the development of a ResearchKit app for this study. A multilanguage observatory study was conducted. At first a suitable research topic, target groups, participating territories, and programming method were carefully identified. The ResearchKit framework was used to program the app. A secure server connection was realized via Secure Sockets Layer. A data storage and security concept separating personal information and study data was proposed. Furthermore, an efficient method to allow multilanguage support and distribute the app in many territories was presented. Ethical implications were considered and taken into account regarding privacy policies. An app study based on ResearchKit was developed without comprehensive iPhone Operating System (iOS) development experience. The Apple App Store is a major distribution channel causing significant download rates (>1.200/y) without active recruitment. Preliminary data analysis showed moderate dropout rates and a good quality of data. A total of 180 participants were currently enrolled with 107 actively participating and producing 424 completed surveys in 9 out of 24 months. ResearchKit is an easy-to-use framework and powerful tool to create medical studies. Advantages are the modular built, the extensive reach of iOS devices, and the convenient programming environment. ©Martin Zens, Peter Woias, Norbert P Suedkamp, Philipp Niemeyer. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 28.02.2017.

Characterization of the Photon Counting CHASE Jr., Chip Built in a 40-nm CMOS Process With a Charge Sharing Correction Algorithm Using a Collimated X-Ray Beam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krzyżanowska, A.; Deptuch, G. W.; Maj, P.

This paper presents the detailed characterization of a single photon counting chip, named CHASE Jr., built in a CMOS 40-nm process, operating with synchrotron radiation. The chip utilizes an on-chip implementation of the C8P1 algorithm. The algorithm eliminates the charge sharing related uncertainties, namely, the dependence of the number of registered photons on the discriminator’s threshold, set for monochromatic irradiation, and errors in the assignment of an event to a certain pixel. The article presents a short description of the algorithm as well as the architecture of the CHASE Jr., chip. The analog and digital functionalities, allowing for proper operationmore » of the C8P1 algorithm are described, namely, an offset correction for two discriminators independently, two-stage gain correction, and different operation modes of the digital blocks. The results of tests of the C8P1 operation are presented for the chip bump bonded to a silicon sensor and exposed to the 3.5- μm -wide pencil beam of 8-keV photons of synchrotron radiation. It was studied how sensitive the algorithm performance is to the chip settings, as well as the uniformity of parameters of the analog front-end blocks. Presented results prove that the C8P1 algorithm enables counting all photons hitting the detector in between readout channels and retrieving the actual photon energy.« less

Magnetic Leviation System Design and Implementation for Wind Tunnel Application

NASA Technical Reports Server (NTRS)

Lin, Chin E.; Sheu, Yih-Ran; Jou, Hui-Long

1996-01-01

This paper presents recent work in magnetic suspension wind tunnel development in National Cheng Kung University. In this phase of research, a control-based study is emphasized to implement a robust control system into the experimental system under study. A ten-coil 10 cm x 10 cm magnetic suspension wind tunnel is built using a set of quadrant detectors for six degree of freedom control. To achieve the attitude control of suspended model with different attitudes, a spacial electromagnetic field simulation using OPERA 3D is studied. A successful test for six degree of freedom control is demonstrated in this paper.

Laser Doppler, velocimeter system for turbine stator cascade studies and analysis of statistical biasing errors

NASA Technical Reports Server (NTRS)

Seasholtz, R. G.

1977-01-01

A laser Doppler velocimeter (LDV) built for use in the Lewis Research Center's turbine stator cascade facilities is described. The signal processing and self contained data processing are based on a computing counter. A procedure is given for mode matching the laser to the probe volume. An analysis is presented of biasing errors that were observed in turbulent flow when the mean flow was not normal to the fringes.

Analysis of commercial equipment and instrumentation for Spacelab payloads, volume 2

NASA Technical Reports Server (NTRS)

1974-01-01

Technical results are presented of a study to investigate analytically the feasibility of using commercially available laboratory equipment and instrumentation in the spacelab in support of various experiments. The feasibility is demonstrated by the breadth of application of commercial, airborne, and military equipment to experiment equipment requirements in the spacelab, and the cost effectiveness of utilizing this class of equipment instead of custom-built aerospace equipment typical of past designs. Equipment design and specifications are discussed.

Loss mechanisms in high-efficiency solar cells: Study of material properties and high-efficiency solar-cell performance on material composition: Project tasks

NASA Technical Reports Server (NTRS)

Sah, C. T.

1985-01-01

Loss mechanisms in high-efficiency solar cells were discussed. Fundamental limitations and practical solutions were stressed. Present cell efficiency is limited by many recombination sites: emitter, base, contacts, and oxide/silicon interface. Use of polysilicon passivation was suggested. After reduction of these losses, a 25% efficient cell could be built. A floating emitter cell design was shown that had the potential of low recombination losses.

Microbiomes of the dust particles collected from the International Space Station and Spacecraft Assembly Facilities.

PubMed

Checinska, Aleksandra; Probst, Alexander J; Vaishampayan, Parag; White, James R; Kumar, Deepika; Stepanov, Victor G; Fox, George E; Nilsson, Henrik R; Pierson, Duane L; Perry, Jay; Venkateswaran, Kasthuri

2015-10-27

The International Space Station (ISS) is a unique built environment due to the effects of microgravity, space radiation, elevated carbon dioxide levels, and especially continuous human habitation. Understanding the composition of the ISS microbial community will facilitate further development of safety and maintenance practices. The primary goal of this study was to characterize the viable microbiome of the ISS-built environment. A second objective was to determine if the built environments of Earth-based cleanrooms associated with space exploration are an appropriate model of the ISS environment. Samples collected from the ISS and two cleanrooms at the Jet Propulsion Laboratory (JPL, Pasadena, CA) were analyzed by traditional cultivation, adenosine triphosphate (ATP), and propidium monoazide-quantitative polymerase chain reaction (PMA-qPCR) assays to estimate viable microbial populations. The 16S rRNA gene Illumina iTag sequencing was used to elucidate microbial diversity and explore differences between ISS and cleanroom microbiomes. Statistical analyses showed that members of the phyla Actinobacteria, Firmicutes, and Proteobacteria were dominant in the samples examined but varied in abundance. Actinobacteria were predominant in the ISS samples whereas Proteobacteria, least abundant in the ISS, dominated in the cleanroom samples. The viable bacterial populations seen by PMA treatment were greatly decreased. However, the treatment did not appear to have an effect on the bacterial composition (diversity) associated with each sampling site. The results of this study provide strong evidence that specific human skin-associated microorganisms make a substantial contribution to the ISS microbiome, which is not the case in Earth-based cleanrooms. For example, Corynebacterium and Propionibacterium (Actinobacteria) but not Staphylococcus (Firmicutes) species are dominant on the ISS in terms of viable and total bacterial community composition. The results obtained will facilitate future studies to determine how stable the ISS environment is over time. The present results also demonstrate the value of measuring viable cell diversity and population size at any sampling site. This information can be used to identify sites that can be targeted for more stringent cleaning. Finally, the results will allow comparisons with other built sites and facilitate future improvements on the ISS that will ensure astronaut health.

The Approval-Built Collection in the Medium-Sized Academic Library

ERIC Educational Resources Information Center

DeVilbiss, Mary Lee

1975-01-01

Compares the approval-built collection with the collection which is created when traditional select and order procedures are used. The study was limited to 1974 imprints in four subject areas and utilized the services of two major vendors. (Author)

Low-noise analog readout channel for SDD in X-ray spectrometry

NASA Astrophysics Data System (ADS)

Atkin, E.; Gusev, A.; Krivchenko, A.; Levin, V.; Malankin, E.; Normanov, D.; Rotin, A.; Sagdiev, I.; Samsonov, V.

2016-01-01

A low-noise analog readout channel optimized for operation with the Silicon Drift Detectors (SDDs) with built-in JFET is presented. The Charge Sensitive Amplifier (CSA) operates in a pulse reset mode using the reset diode built-in the SDD detector. The shaper is a 6th order semi-Gaussian filter with switchable discrete shaping times. The readout channel provides the Equivalent Noise Charge (ENC) of 12e- (simulation) and input dynamic range of 30 keV . The measured energy resolution at the 5,89 keV line of a 55Fe X-ray source is 336 eV (FWHM). The channel was prototyped via Europractice in the AMS 350 nm process as miniASIC. The simulation and first measurement results are presented in the paper.

An in situ tribometer for measuring friction and wear of polymers in a high pressure hydrogen environment

NASA Astrophysics Data System (ADS)

Duranty, Edward R.; Roosendaal, Timothy J.; Pitman, Stan G.; Tucker, Joseph C.; Owsley, Stanley L.; Suter, Jonathan D.; Alvine, Kyle J.

2017-09-01

High pressure hydrogen effects on the friction and wear of polymers are of importance to myriad applications. Of special concern are those used in the infrastructure for hydrogen vehicle refueling stations, including compressor sliding seals, valves, and actuators. While much is known about potentially damaging embrittlement effects of hydrogen on metals, relatively little is known about the effects of high pressure hydrogen on polymers. However, based on the limited results that are published in the literature, polymers also apparently exhibit compatibility issues with hydrogen. An additional study is needed to elucidate these effects to avoid incompatibilities either through design or material selection. As part of this effort, we present here in situ high pressure hydrogen studies of the friction and wear on example polymers. To this end, we have built and demonstrated a custom-built pin-on-flat linear reciprocating tribometer and demonstrated its use with in situ studies of friction and wear behavior of nitrile butadiene rubber polymer samples in 28 MPa hydrogen. Tribology results indicate that friction and wear is increased in high pressure hydrogen as compared both with values measured in high pressure argon and ambient air conditions.

The Researching on Evaluation of Automatic Voltage Control Based on Improved Zoning Methodology

NASA Astrophysics Data System (ADS)

Xiao-jun, ZHU; Ang, FU; Guang-de, DONG; Rui-miao, WANG; De-fen, ZHU

2018-03-01

According to the present serious phenomenon of increasing size and structure of power system, hierarchically structured automatic voltage control(AVC) has been the researching spot. In the paper, the reduced control model is built and the adaptive reduced control model is researched to improve the voltage control effect. The theories of HCSD, HCVS, SKC and FCM are introduced and the effect on coordinated voltage regulation caused by different zoning methodologies is also researched. The generic framework for evaluating performance of coordinated voltage regulation is built. Finally, the IEEE-96 stsyem is used to divide the network. The 2383-bus Polish system is built to verify that the selection of a zoning methodology affects not only the coordinated voltage regulation operation, but also its robustness to erroneous data and proposes a comprehensive generic framework for evaluating its performance. The New England 39-bus network is used to verify the adaptive reduced control models’ performance.

[Built-up land change and its impact on ecological quality in a fast-growing economic zone: Jinjiang County, Fujian Province, China].

PubMed

Shi, Ting Ting; Xu, Han Qiu; Tang, Fei

2017-04-18

Since China's reform and opening-up, the rapid growth of China's economy has greatly accelerated the expansion of built-up land, which has affected regional ecological environment to a great extent. Taking Jinjiang County of Fujian Province, one of the fastest economic-developing counties in the coastal areas of southeastern China, as a case study area, this paper focused on analyzing the rapid built-up land expansion process of the county and its impact on county's ecological quality using remote sensing techniques. Based on two Landsat images of 1996 and 2015 of Jinjiang, the built-up land of the county was extracted using the index-based built-up index (IBI) and its change was analyzed. In the meantime, the ecological status of Jinjiang was evaluated with a recently-proposed remote sensing based ecological index (RSEI) and the relationship between the built-up land dynamics and the ecological status changes of the county was quantitatively examined. The results showed that during the period from 1996 to 2015, the area of built-up land of Jinjiang had a net increase of 68.54 km 2 , a growth of 45%, and the expansion intensity was 0.55. The expansion of the built-up lands has caused overall degradation of the county's ecological quality. The mean value of RSEI of the county had declined from 0.532 in 1996 to 0.460 in 2015, a drop of13.5%. The area proportion of high ecological-quality grades also significantly fell from 39% in 1996 to 21% in 2015. The built-up land expansion intensity was negatively correlated with the ecological quality change.

A modeling approach on why simple central pattern generators are built of irregular neurons.

PubMed

Reyes, Marcelo Bussotti; Carelli, Pedro Valadão; Sartorelli, José Carlos; Pinto, Reynaldo Daniel

2015-01-01

The crustacean pyloric Central Pattern Generator (CPG) is a nervous circuit that endogenously provides periodic motor patterns. Even after about 40 years of intensive studies, the rhythm genesis is still not rigorously understood in this CPG, mainly because it is made of neurons with irregular intrinsic activity. Using mathematical models we addressed the question of using a network of irregularly behaving elements to generate periodic oscillations, and we show some advantages of using non-periodic neurons with intrinsic behavior in the transition from bursting to tonic spiking (as found in biological pyloric CPGs) as building components. We studied two- and three-neuron model CPGs built either with Hindmarsh-Rose or with conductance-based Hodgkin-Huxley-like model neurons. By changing a model's parameter we could span the neuron's intrinsic dynamical behavior from slow periodic bursting to fast tonic spiking, passing through a transition where irregular bursting was observed. Two-neuron CPG, half center oscillator (HCO), was obtained for each intrinsic behavior of the neurons by coupling them with mutual symmetric synaptic inhibition. Most of these HCOs presented regular antiphasic bursting activity and the changes of the bursting frequencies was studied as a function of the inhibitory synaptic strength. Among all HCOs, those made of intrinsic irregular neurons presented a wider burst frequency range while keeping a reliable regular oscillatory (bursting) behavior. HCOs of periodic neurons tended to be either hard to change their behavior with synaptic strength variations (slow periodic burster neurons) or unable to perform a physiologically meaningful rhythm (fast tonic spiking neurons). Moreover, 3-neuron CPGs with connectivity and output similar to those of the pyloric CPG presented the same results.

Commuting Mode Choice in a High-Density City: Do Land-Use Density and Diversity Matter in Hong Kong?

PubMed Central

Sun, Guibo; Sarkar, Chinmoy; Xiao, Yang

2018-01-01

Hong Kong is a densely populated and transit-oriented Chinese city, which provides an ideal urban environment with which to study the various successful facets of land use policy as a model for potential replication to curb increasing car use in other Chinese cities. We examine the commuting mode choice of 203,900 households living in 4768 street blocks in Hong Kong from 2011 census. A street block is the smallest planning unit, made up of one or more housing estates with a homogenous built environment and socioeconomic status. The built environment is measured using the five Ds framework, an international dimensioning framework for classifying and measuring attributes of the built environment for physical activity and travel behaviors. Generalized, multi-level mixed models were applied to detect the associations between travel choice and built environment characteristics, while adjusting for socioeconomic status. Design and destination accessibility had greater effects on the choices to walk and take public transport than on the choice to drive. Density and diversity had only marginal effects on mode choice. Unexpectedly, distance to the urban center had the opposite effect on automobile use to that found in Western studies. Hong Kong residents living close to the urban center were more likely to drive for commuting trips. The contrasting findings between our study and Western studies suggest that the associations between a high-density built environment and travel choice vary with urban context. PMID:29734721

Small ICBM Laser Firing Unit (LFU)

NASA Technical Reports Server (NTRS)

Aloise, Jim; Snarr, Larry

1993-01-01

The topics are presented in viewgraph form and include the following: history/schedule, LFU development hardware; specifications/features; components; optical layout-arm; optical layout-safe; built in test; and producibility issues.

Three-dimensional structure of the submarine flanks of La Réunion inferred from geophysical data

NASA Astrophysics Data System (ADS)

Gailler, Lydie-Sarah; LéNat, Jean-FrançOis

2010-12-01

La Réunion (Indian Ocean) constitutes a huge volcanic oceanic system of which most of the volume is submerged. We present a study of its submarine part based on the interpretation of magnetic and gravity data compiled from old and recent surveys. A model of the submarine internal structure is derived from 3-D and 2-D models using constraints from previous geological and geophysical studies. Two large-scale, previously unknown, buried volcanic construction zones are discovered in continuation of the island's construction. To the east, the Alizés submarine zone is interpreted as the remnants of Les Alizés volcano eastward flank whose center is marked by a large hypovolcanic intrusion complex. To the southwest, the Etang Salé submarine zone is interpreted as an extension of Piton des Neiges, probably fed by a volcanic rift zone over a large extent. They were predominantly built during the Matuyama period and thus probably belong to early volcanism. A correlation exists between their top and seismic horizons recognized in previous studies and interpreted as the base of the volcanic edifice. Their morphology suggested a lithospheric bulging beneath La Réunion, not required to explain our data, since the seismic interfaces match the top of our volcanic constructions. The coastal shelf coincides with a negative Bouguer anomaly belt, often associated with magnetic anomalies, suggesting a shelf built by hyaloclastites. A detailed analysis of the offshore continuation of La Montagne Massif to the north confirms this hypothesis. The gravity analysis confirms that the bathymetric bulges, forming the northern, eastern, southern, and western submarine flanks, are predominantly built by debris avalanche deposits at the surface.

Large-area settlement pattern recognition from Landsat-8 data

NASA Astrophysics Data System (ADS)

Wieland, Marc; Pittore, Massimiliano

2016-09-01

The study presents an image processing and analysis pipeline that combines object-based image analysis with a Support Vector Machine to derive a multi-layered settlement product from Landsat-8 data over large areas. 43 image scenes are processed over large parts of Central Asia (Southern Kazakhstan, Kyrgyzstan, Tajikistan and Eastern Uzbekistan). The main tasks tackled by this work include built-up area identification, settlement type classification and urban structure types pattern recognition. Besides commonly used accuracy assessments of the resulting map products, thorough performance evaluations are carried out under varying conditions to tune algorithm parameters and assess their applicability for the given tasks. As part of this, several research questions are being addressed. In particular the influence of the improved spatial and spectral resolution of Landsat-8 on the SVM performance to identify built-up areas and urban structure types are evaluated. Also the influence of an extended feature space including digital elevation model features is tested for mountainous regions. Moreover, the spatial distribution of classification uncertainties is analyzed and compared to the heterogeneity of the building stock within the computational unit of the segments. The study concludes that the information content of Landsat-8 images is sufficient for the tested classification tasks and even detailed urban structures could be extracted with satisfying accuracy. Freely available ancillary settlement point location data could further improve the built-up area classification. Digital elevation features and pan-sharpening could, however, not significantly improve the classification results. The study highlights the importance of dynamically tuned classifier parameters, and underlines the use of Shannon entropy computed from the soft answers of the SVM as a valid measure of the spatial distribution of classification uncertainties.

Non-linear effects of the built environment on automobile-involved pedestrian crash frequency: A machine learning approach.

PubMed

Ding, Chuan; Chen, Peng; Jiao, Junfeng

2018-03-01

Although a growing body of literature focuses on the relationship between the built environment and pedestrian crashes, limited evidence is provided about the relative importance of many built environment attributes by accounting for their mutual interaction effects and their non-linear effects on automobile-involved pedestrian crashes. This study adopts the approach of Multiple Additive Poisson Regression Trees (MAPRT) to fill such gaps using pedestrian collision data collected from Seattle, Washington. Traffic analysis zones are chosen as the analytical unit. The effects of various factors on pedestrian crash frequency investigated include characteristics the of road network, street elements, land use patterns, and traffic demand. Density and the degree of mixed land use have major effects on pedestrian crash frequency, accounting for approximately 66% of the effects in total. More importantly, some factors show clear non-linear relationships with pedestrian crash frequency, challenging the linearity assumption commonly used in existing studies which employ statistical models. With various accurately identified non-linear relationships between the built environment and pedestrian crashes, this study suggests local agencies to adopt geo-spatial differentiated policies to establish a safe walking environment. These findings, especially the effective ranges of the built environment, provide evidence to support for transport and land use planning, policy recommendations, and road safety programs. Copyright © 2018 Elsevier Ltd. All rights reserved.

Built environment interventions aimed at improving physical activity levels in rural Ontario health units: a descriptive qualitative study.

PubMed

Coghill, Cara-Lee; Valaitis, Ruta K; Eyles, John D

2015-05-03

Few studies to date have explored the relationship between the built environment and physical activity specifically in rural settings. The Ontario Public Health Standards policies mandate that health units in Ontario address the built environment; however, it is unclear how public health practitioners are integrating the built environment into public health interventions aimed at improving physical activity in chronic disease prevention programs. This descriptive qualitative study explored interventions that have or are being implemented which address the built environment specifically related to physical activity in rural Ontario health units, and the impact of these interventions. Data were collected through twelve in-depth semi-structured interviews with rural public health practitioners and managers representing 12 of 13 health units serving rural communities. Key themes were identified using qualitative content analysis. Themes that emerged regarding the types of interventions that health units are employing included: Engagement with policy work at a municipal level; building and working with community partners, committees and coalitions; gathering and providing evidence; developing and implementing programs; and social marketing and awareness raising. Evaluation of interventions to date has been limited. Public health interventions, and their evaluations, are complex. Health units who serve large rural populations in Ontario are engaging in numerous activities to address physical activity levels. There is a need to further evaluate the impact of these interventions on population health.

Older adults' quality of life - Exploring the role of the built environment and social cohesion in community-dwelling seniors on low income.

PubMed

Engel, L; Chudyk, A M; Ashe, M C; McKay, H A; Whitehurst, D G T; Bryan, S

2016-09-01

The built environment and social cohesion are increasingly recognized as being associated with older adults' quality of life (QoL). However, limited research in this area still exists and the relationship has remained unexplored in the area of Metro Vancouver, Canada. This study examined the association between the built environment and social cohesion with QoL of 160 community-dwelling older adults (aged ≥ 65 years) on low income from Metro Vancouver. Cross-sectional data acquired from the Walk the Talk (WTT) study were used. Health-related QoL (HRQoL) and capability wellbeing were assessed using the EQ-5D-5L and the ICECAP-O, respectively. Measures of the environment comprised the NEWS-A (perceived built environment measure), the Street Smart Walk Score (objective built environment measure), and the SC-5PT (a measure of social cohesion). The primary analysis consists of Tobit regression models to explore the associations between environmental features and HRQoL as well as capability wellbeing. Key findings indicate that after adjusting for covariates, older adults' capability wellbeing was associated with street connectivity and social cohesion, while no statistically significant associations were found between environmental factors and HRQoL. Our results should be considered as hypothesis-generating and need confirmation in a larger longitudinal study. Copyright © 2016 Elsevier Ltd. All rights reserved.

Neighbourhood Built Environment Influences on Physical Activity among Adults: A Systematized Review of Qualitative Evidence

PubMed Central

Salvo, Grazia; Doyle-Baker, Patricia K.; McCormack, Gavin R.

2018-01-01

Qualitative studies can provide important information about how and why the built environment impacts physical activity decision-making—information that is important for informing local urban policies. We undertook a systematized literature review to synthesize findings from qualitative studies exploring how the built environment influences physical activity in adults. Our review included 36 peer-reviewed qualitative studies published from 1998 onwards. Our findings complemented existing quantitative evidence and provided additional insight into how functional, aesthetic, destination, and safety built characteristics influence physical activity decision-making. Sociodemographic characteristics (age, sex, ethnicity, and socioeconomic status) also impacted the BE’s influence on physical activity. Our review findings reinforce the need for synergy between transportation planning, urban design, landscape architecture, road engineering, parks and recreation, bylaw enforcement, and public health to be involved in creating neighbourhood environments that support physical activity. Our findings support a need for local neighbourhood citizens and associations with representation from individuals and groups with different sociodemographic backgrounds to have input into neighbourhood environment planning process. PMID:29724048

Architecture in Education: A Resource of Imaginative Ideas and Tested Activities.

ERIC Educational Resources Information Center

Abhau, Marcy, Ed.; And Others

The activities presented in this book encompass a variety of perceptual, social, and technological issues as they relate to the built environment. They are organized to present a coherent, cumulative series. Generalizations become specific as vocabulary is developed and planned techniques explained. Curriculum guide charts indicate subject areas…

The Dynamic Microstructure of Speech Production: Semantic Interference Built on the Fly

ERIC Educational Resources Information Center

Abdel Rahman, Rasha; Melinger, Alissa

2011-01-01

We present 4 experiments investigating dynamic and flexible aspects of semantic activation spread during speech planning. In a semantic blocking paradigm, pictures of objects were presented in categorically homogeneous blocks consisting of semantic category members (e.g., foods), in blocks consisting of seemingly unrelated objects that could…

PTC Mid Year Seminar. Collection of Presentations (Yokohama, Japan, June 3-4, 1997).

ERIC Educational Resources Information Center

Ando, Takatoshi

This proceedings volume from the Pacific Telecommunications Council Mid-Year Seminar includes the following presentations: "Platform and Equipment for Access Network" (Yukou Mochida); "Integrated Services Television: Digital Age TV with a Built-in Home Server" (Tatsuhito Nagaya); "Future of the Internet: Future of…

Lenguaje. Libro del alumno (Language. Student's Book).

ERIC Educational Resources Information Center

National Assessment and Dissemination Center for Bilingual Education, Fall River, MA.

A Spanish language workbook built around the theme of living together is presented here. It contains two units, "Companerismo" and "Cualidades humanizantes," and a total of five lessons. Lessons one and two of Unit One, "Ayudemonos" and "Mi amigo, mi hermano" present a passage for reading comprehension, various types of comprehension exercises…

Considering built environment and spatial correlation in modeling pedestrian injury severity.

PubMed

Prato, Carlo G; Kaplan, Sigal; Patrier, Alexandre; Rasmussen, Thomas K

2018-01-02

This study looks at mitigating and aggravating factors that are associated with the injury severity of pedestrians when they have crashes with another road user and overcomes existing limitations in the literature by focusing attention on the built environment and considering spatial correlation across crashes. Reports for 6,539 pedestrian crashes occurred in Denmark between 2006 and 2015 were merged with geographic information system resources containing detailed information about the built environment and exposure at the crash locations. A linearized spatial logit model estimated the probability of pedestrians sustaining a severe or fatal injury conditional on the occurrence of a crash with another road user. This study confirms previous findings about older pedestrians and intoxicated pedestrians being the most vulnerable road users and crashes with heavy vehicles and in roads with higher speed limits being related to the most severe outcomes. This study provides novel perspectives by showing positive spatial correlations of crashes with the same severity outcomes and emphasizing the role of the built environment in the proximity of the crash. This study emphasizes the need for thinking about traffic calming measures, illumination solutions, road maintenance programs, and speed limit reductions. Moreover, this study emphasizes the role of the built environment, because shopping areas, residential areas, and walking traffic density are positively related to a reduction in pedestrian injury severity. Often, these areas have in common a larger pedestrian mass that is more likely to make other road users more aware and attentive, whereas the same does not seem to apply to areas with lower pedestrian density.

Racial residential segregation and preterm birth: built environment as a mediator.

PubMed

Anthopolos, Rebecca; Kaufman, Jay S; Messer, Lynne C; Miranda, Marie Lynn

2014-05-01

Racial residential segregation has been associated with preterm birth. Few studies have examined mediating pathways, in part because, with binary outcomes, indirect effects estimated from multiplicative models generally lack causal interpretation. We develop a method to estimate additive-scale natural direct and indirect effects from logistic regression. We then evaluate whether segregation operates through poor-quality built environment to affect preterm birth. To estimate natural direct and indirect effects, we derive risk differences from logistic regression coefficients. Birth records (2000-2008) for Durham, North Carolina, were linked to neighborhood-level measures of racial isolation and a composite construct of poor-quality built environment. We decomposed the total effect of racial isolation on preterm birth into direct and indirect effects. The adjusted total effect of an interquartile increase in racial isolation on preterm birth was an extra 27 preterm events per 1000 births (risk difference = 0.027 [95% confidence interval = 0.007 to 0.047]). With poor-quality built environment held at the level it would take under isolation at the 25th percentile, the direct effect of an interquartile increase in isolation was 0.022 (-0.001 to 0.042). Poor-quality built environment accounted for 35% (11% to 65%) of the total effect. Our methodology facilitates the estimation of additive-scale natural effects with binary outcomes. In this study, the total effect of racial segregation on preterm birth was partially mediated by poor-quality built environment.

The Outer Loop bioreactor: a case study of settlement monitoring and solids decomposition.

PubMed

Abichou, Tarek; Barlaz, Morton A; Green, Roger; Hater, Gary

2013-10-01

The Outer Loop landfill bioreactor (OLLB) located in Louisville, KY, USA has been in operation since 2000 and represents an opportunity to evaluate long-term bioreactor monitoring data at a full-scale operational landfill. Three types of landfill units were studied including a Control cell, a new landfill area that had a piping network installed as waste was being placed to support leachate recirculation (As-Built cell), and a conventional landfill that was modified to allow for liquid recirculation (Retrofit cell). The objective of this study is to summarize the results of settlement data and assess how these data relate to solids decomposition monitoring at the OLLB. The Retrofit cells started to settle as soon as liquids were introduced. The cumulative settlement during the 8years of monitoring varied from 60 to 100cm. These results suggest that liquid recirculation in the Retrofit cells caused a 5-8% reduction in the thickness of the waste column. The average long-term settlement in the As-Built and Control Cells was about 37% and 19%, respectively. The modified compression index (Cα(')) was 0.17 for the Control cells and 0.2-0.48 for the As-Built cells. While the As-Built cells exhibited greater settlement than the Control cells, the data do not support biodegradation as the only explanation. The increased settlement in the As-Built bioreactor cell appeared to be associated with liquid movement and not with biodegradation because both chemical (biochemical methane potential) and physical (moisture content) indicators of decomposition were similar in the Control and As-Built cells. The solids data are consistent with the concept that bioreactor operations accelerate the rate of decomposition, but not necessarily the cumulative loss of anaerobically degradable solids. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Fatigue Behavior of Built-Up Welded Beams of Commercially Pure Titanium

NASA Astrophysics Data System (ADS)

Patnaik, Anil; Poondla, Narendra; Bathini, Udaykar; Srivatsan, T. S.

2011-10-01

In this article, the results of a recent study aimed at evaluating, understanding, and rationalizing the extrinsic influence of fatigue loading on the response characteristics of built-up welded beams made from commercially pure titanium (Grade 2) are presented and discussed. The beams were made from welding plates and sheets of titanium using the pulsed gas metal arc welding technique to form a structural beam having an I-shaped cross section. The welds made for the test beams of the chosen metal were fillet welds using a matching titanium filler metal wire. The maximum and minimum load values at which the built-up beams were cyclically deformed were chosen to be within the range of 22-45% of the maximum predicted flexural static load. The beams were deformed in fatigue at a stress ratio of 0.1 and constant frequency of 5 Hz. The influence of the ratio of maximum load with respect to the ultimate failure load on fatigue performance, quantified in terms of fatigue life, was examined. The percentage of maximum load to ultimate load that resulted in run-out of one million cycles was established. The overall fracture behavior of the failed beam sample was characterized by scanning electron microscopy observations to establish the conjoint influence of load severity, intrinsic microstructural effects, and intrinsic fracture surface features in governing failure by fracture.

Design and implementation of the mobility assessment tool: software description.

PubMed

Barnard, Ryan T; Marsh, Anthony P; Rejeski, Walter Jack; Pecorella, Anthony; Ip, Edward H

2013-07-23

In previous work, we described the development of an 81-item video-animated tool for assessing mobility. In response to criticism levied during a pilot study of this tool, we sought to develop a new version built upon a flexible framework for designing and administering the instrument. Rather than constructing a self-contained software application with a hard-coded instrument, we designed an XML schema capable of describing a variety of psychometric instruments. The new version of our video-animated assessment tool was then defined fully within the context of a compliant XML document. Two software applications--one built in Java, the other in Objective-C for the Apple iPad--were then built that could present the instrument described in the XML document and collect participants' responses. Separating the instrument's definition from the software application implementing it allowed for rapid iteration and easy, reliable definition of variations. Defining instruments in a software-independent XML document simplifies the process of defining instruments and variations and allows a single instrument to be deployed on as many platforms as there are software applications capable of interpreting the instrument, thereby broadening the potential target audience for the instrument. Continued work will be done to further specify and refine this type of instrument specification with a focus on spurring adoption by researchers in gerontology and geriatric medicine.

Design and implementation of the mobility assessment tool: software description

PubMed Central

2013-01-01

Background In previous work, we described the development of an 81-item video-animated tool for assessing mobility. In response to criticism levied during a pilot study of this tool, we sought to develop a new version built upon a flexible framework for designing and administering the instrument. Results Rather than constructing a self-contained software application with a hard-coded instrument, we designed an XML schema capable of describing a variety of psychometric instruments. The new version of our video-animated assessment tool was then defined fully within the context of a compliant XML document. Two software applications—one built in Java, the other in Objective-C for the Apple iPad—were then built that could present the instrument described in the XML document and collect participants’ responses. Separating the instrument’s definition from the software application implementing it allowed for rapid iteration and easy, reliable definition of variations. Conclusions Defining instruments in a software-independent XML document simplifies the process of defining instruments and variations and allows a single instrument to be deployed on as many platforms as there are software applications capable of interpreting the instrument, thereby broadening the potential target audience for the instrument. Continued work will be done to further specify and refine this type of instrument specification with a focus on spurring adoption by researchers in gerontology and geriatric medicine. PMID:23879716

Predictors of Study Success from a Teacher's Perspective of the Quality of the Built Environment

ERIC Educational Resources Information Center

Kok, Herman; Mobach, Mark; Omta, Onno

2015-01-01

The article aims to find predictors of study success from a teacher's perspective that relate to the built environment. The research is based on a national online survey among 1752 teachers at 18 Dutch Universities of Applied Sciences. Multivariate data analyses were used to test the hypothesis that the quality of spatial and functional aspects at…

Residential instability and obesity over time: the role of the social and built environment.

PubMed

Jones, Antwan

2015-03-01

This research uses the National Longitudinal Study of Adult Health's Obesity and Neighborhood Environment (ONE) to examine the relationship between residential instability and change in obesity in the United States. Mobility is thought to be related to obesity because it conditions what kinds of amenities are present in the areas where people live and what level of motivation individuals have to take advantage of these amenities. Thus, this research uses spatial measures as potential confounders for the mobility-health relationship. Results suggest that mobility is a protective factor against weight gain over time. However, the effect of mobility is completely explained by the environmental characteristics. After adjusting for changes in physical activity resources and the crime rate, adolescents who move and adolescents who do not move have precisely the same risk of being obese. Mobility is thus a function of the change in environmental characteristics. Implications for developing the built environment are discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Exercise to Enhance Smoking Cessation: the Getting Physical on Cigarette Randomized Control Trial.

PubMed

Prapavessis, Harry; De Jesus, Stefanie; Fitzgeorge, Lindsay; Faulkner, Guy; Maddison, Ralph; Batten, Sandra

2016-06-01

Exercise has been proposed as a useful smoking cessation aid. The purpose of the present study is to determine the effect of an exercise-aided smoking cessation intervention program, with built-in maintenance components, on post-intervention 14-, 26- and 56-week cessation rates. Female cigarette smokers (n = 413) participating in a supervised exercise and nicotine replacement therapy (NRT) smoking cessation program were randomized to one of four conditions: exercise + smoking cessation maintenance, exercise maintenance + contact control, smoking cessation maintenance + contact control or contact control. The primary outcome was continuous smoking abstinence. Abstinence differences were found between the exercise and equal contact non-exercise maintenance groups at weeks 14 (57 vs 43 %), 26 (27 vs 21 %) and 56 (26 vs 23.5 %), respectively. Only the week 14 difference approached significance, p = 0.08. An exercise-aided NRT smoking cessation program with built-in maintenance components enhances post-intervention cessation rates at week 14 but not at weeks 26 and 56.

Dynamic and Fatigue Analysis of an 18th Century Steel Arch Bridge

NASA Astrophysics Data System (ADS)

Boumechra, Nadir; Hamdaoui, Karim

2008-07-01

Within the "Oran-Tlemcen" railway line realization project (159 km), several bridges were built by the Railroads Algerian West Company. 7 km from the east of Tlemcen city, this railway line must cross a very broken mountainous collar, that's why the French engineer "Gustave Eiffel" was solicited to construct a 68 m length bridge. In 1890, an arch steel truss bridge was realized. The bridge presents 300 m of apron curvature radius and, currently, is considered as one of the most important monuments of the Algerian historical heritage. Considering the age of the bridge and the evolution of the railway loads in time, it was essential to check the good behavior of the studied structure. For that, analyses to verify the physical and mechanical properties of the growth iron members are made. A finite element model of the bridge was built and numerical simulations were drawn. The structural vibration conducted analysis permit to understand the behavior of this particular structure, then to evaluate (in detail) the rate of the structure fatigue.

Partial psychic seizures and brain organization.

PubMed

Ardila, A; Montañes, P; Bernal, B; Serpa, A; Ruiz, E

1986-08-01

This research was an attempt to determine the cerebral areas involved in focal epileptic seizures accompanied by psychic manifestations. Six types of partial seizures involving psychic symptomatology and phonatory seizures were included in the study. Sixty-one clinical records of focal epilepsy, which had been revealed by means of a CT-scan examination, were analyzed and a subsample of 25 patients with psychic symptoms was selected. The scans taken of the lesions were transferred to a six-level standard template built for this purpose. Subsequently, templates of patients with the same type of seizures were superimposed. The critical zones for the seven types of seizures studied are presented. A clear correlation was found between these results and our present knowledge of functional brain organization.

Distributed Lag Models: Examining Associations between the Built Environment and Health

PubMed Central

Baek, Jonggyu; Sánchez, Brisa N.; Berrocal, Veronica J.; Sanchez-Vaznaugh, Emma V.

2016-01-01

Built environment factors constrain individual level behaviors and choices, and thus are receiving increasing attention to assess their influence on health. Traditional regression methods have been widely used to examine associations between built environment measures and health outcomes, where a fixed, pre-specified spatial scale (e.g., 1 mile buffer) is used to construct environment measures. However, the spatial scale for these associations remains largely unknown and misspecifying it introduces bias. We propose the use of distributed lag models (DLMs) to describe the association between built environment features and health as a function of distance from the locations of interest and circumvent a-priori selection of a spatial scale. Based on simulation studies, we demonstrate that traditional regression models produce associations biased away from the null when there is spatial correlation among the built environment features. Inference based on DLMs is robust under a range of scenarios of the built environment. We use this innovative application of DLMs to examine the association between the availability of convenience stores near California public schools, which may affect children’s dietary choices both through direct access to junk food and exposure to advertisement, and children’s body mass index z-scores (BMIz). PMID:26414942

The Influence of Family Dog Ownership and Parental Perceived Built Environment Measures on Children's Physical Activity within the Washington, DC Area.

PubMed

Roberts, Jennifer D; Rodkey, Lindsey; Grisham, Cortney; Ray, Rashawn

2017-11-16

Sedentary behavior and physical inactivity are significant contributors to youth obesity in the United States. Neighborhood dog walking is an outlet for physical activity (PA). Therefore, understanding the relationship between built environment, dog ownership, and youth PA is essential. This study examined the influence of dog ownership and parental built environment perceptions on children's PA in the Washington, D.C. area. In 2014, questionnaires were mailed to 2000 parents to assess family dog ownership; children's outdoor dog walking or playing; and parental perceived built environment measures. Chi-square analyses examined differences in parental perceived built environment measures between children with and without family dogs. The sample included 144 children (50% female; average-age 9.7 years; 56.3% White; 23.7% African-American; 10.4% Asian-American; 29.9% owned dog). Only 13% and 5.6% of the children walked or played outdoors with the dog daily, respectively. A significantly greater proportion ( p -value < 0.05) of parents who owned dogs recognized and observed some home built environment measures (e.g., traffic speed on most streets is 30 mph or less) that were PA -promoting for their children. Findings suggest that dog ownership may provide more positive parental perceptions of the neighborhood built environment, which supports children's outdoor PA through dog walking and playing.

Accessibility and independent mobility in rural built environments : challenges and opportunities for young people.

DOT National Transportation Integrated Search

2013-03-01

Much of the research on accessibility and the built environment performed to date have been : conducted in urban settings and most have focused on adults. Few studies addressing this topic : have concerned areas with low population density and fewer ...

Towards Entrepreneurial Learning Competencies: The Perspective of Built Environment Students

ERIC Educational Resources Information Center

Ernest, Kissi; Matthew, Somiah K.; Samuel, Ansah K.

2015-01-01

This paper sought to discuss entrepreneurial learning competencies by determining the outcome of entrepreneurial learning on the views of built environment students in the university setting. In this study, three relevant competencies were identified for entrepreneurial learning through literature, namely: entrepreneurial attitude, entrepreneurial…

Deployment of Wind Turbines in the Built Environment: Risks, Lessons, and Recommended Practices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baring-Gould, Ian; Fields, Jason; Oteri, Frank

Built-environment wind turbine (BEWT) projects are wind energy projects that are constructed on, in, or near buildings, as shown below. These projects present an opportunity for distributed, low-carbon generation combined with highly visible statements on sustainability, but the BEWT niche of the wind industry is still developing and is relatively less mature than the utility-scale wind or conventional ground-based distributed wind sectors. This poster investigates the current state of the BEWT industry by reviewing available literature on BEWT projects as well as interviewing project owners on their experiences deploying and operating the technology.

Proton conduction in metal-organic frameworks and related modularly built porous solids.

PubMed

Yoon, Minyoung; Suh, Kyungwon; Natarajan, Srinivasan; Kim, Kimoon

2013-03-04

Proton-conducting materials are an important component of fuel cells. Development of new types of proton-conducting materials is one of the most important issues in fuel-cell technology. Herein, we present newly developed proton-conducting materials, modularly built porous solids, including coordination polymers (CPs) or metal-organic frameworks (MOFs). The designable and tunable nature of the porous materials allows for fast development in this research field. Design and synthesis of the new types of proton-conducting materials and their unique proton-conduction properties are discussed. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A biometric access personal optical storage device

NASA Astrophysics Data System (ADS)

Davies, David H.; Ray, Steve; Gurkowski, Mark; Lee, Lane

2007-01-01

A portable USB2.0 personal storage device that uses built-in encryption and allows data access through biometric scanning of a finger print is described. Biometric image derived templates are stored on the removable 32 mm write once (WO) media. The encrypted templates travel with the disc and allow access to the data providing the biometric feature (e.g. the finger itself) is present. The device also allows for export and import of the templates under secure key exchange protocols. The storage system is built around the small form factor optical engine that uses a tilt arm rotary actuator and front surface media.

Stand-off detection of alcohol in car cabins

NASA Astrophysics Data System (ADS)

Młyńczak, Jarosław; Kubicki, Jan; Kopczyński, Krzysztof

2014-01-01

The results of experiments concerning detection of alcohol vapors in car cabins using a laboratory device, which was developed and built at the Institute of Optoelectronics at the Military University of Technology, are described. The work is a continuation of the investigations presented in an earlier paper. On the basis of those results, the whole device was designed and built. Then it was investigated using a car with special system simulating a driver under the influence of alcohol. To simulate the appropriate concentration of alcohol in human blood, a special method of generation of alcohol vapor was developed.

Stability Assessment as a Criterion of Stabilization of the Movement Trajectory of Mobile Crane Working Elements

NASA Astrophysics Data System (ADS)

Kacalak, W.; Budniak, Z.; Majewski, M.

2018-02-01

The article presents a stability assessment method of the mobile crane handling system based on the safety indicator values that were accepted as the trajectory optimization criterion. With the use of the mathematical model built and the model built in the integrated CAD/CAE environment, analyses were conducted of the displacements of the mass centre of the crane system, reactions of the outrigger system, stabilizing and overturning torques that act on the crane as well as the safety indicator values for the given movement trajectories of the crane working elements.

Predicting Error Bars for QSAR Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schroeter, Timon; Technische Universitaet Berlin, Department of Computer Science, Franklinstrasse 28/29, 10587 Berlin; Schwaighofer, Anton

2007-09-18

Unfavorable physicochemical properties often cause drug failures. It is therefore important to take lipophilicity and water solubility into account early on in lead discovery. This study presents log D{sub 7} models built using Gaussian Process regression, Support Vector Machines, decision trees and ridge regression algorithms based on 14556 drug discovery compounds of Bayer Schering Pharma. A blind test was conducted using 7013 new measurements from the last months. We also present independent evaluations using public data. Apart from accuracy, we discuss the quality of error bars that can be computed by Gaussian Process models, and ensemble and distance based techniquesmore » for the other modelling approaches.« less

Effects of Buffer Size and Shape on Associations between the Built Environment and Energy Balance

PubMed Central

Berrigan, David; Hart, Jaime E.; Hipp, J. Aaron; Hoehner, Christine M.; Kerr, Jacqueline; Major, Jacqueline M.; Oka, Masayoshi; Laden, Francine

2014-01-01

Uncertainty in the relevant spatial context may drive heterogeneity in findings on the built environment and energy balance. To estimate the effect of this uncertainty, we conducted a sensitivity analysis defining intersection and business densities and counts within different buffer sizes and shapes on associations with self-reported walking and body mass index. Linear regression results indicated that the scale and shape of buffers influenced study results and may partly explain the inconsistent findings in the built environment and energy balance literature. PMID:24607875

Study of HV Dielectrics for High Frequency Operation in Linear & Nonlinear Transmission Lines & Simulation & Development of Hybrid Nonlinear Lines for RF Generation

DTIC Science & Technology

2015-08-27

applied reverse voltage [8], [9]. In this report, the experimental results of a varactor diode NLTL built with 30 sections are presented. Besides, Spice ...capacitive line (NLCL) using commercial BT and PZT ceramic capacitors. Corresponding NLCL Spice simulation is provided for comparison with experimental...the output pulse. In special for PZT, Spice simulation of a line with respective linear capacitors illustrates its weak nonlinearity as the

Computational and experimental study of atmospheric moisture in ceramic blocks filled with waste fibres in winter season

NASA Astrophysics Data System (ADS)

Stastnik, S.

2016-06-01

Development of materials for vertical outer building structures tends to application of hollow clay blocks filled with some appropriate insulation material. Ceramic fittings provide high thermal resistance, but the walls built from them suffer from condensation of air humidity in winter season frequently. The paper presents the computational simulation and experimental laboratory validation of moisture behaviour of such masonry with insulation prepared from waste fibres under the Central European climatic conditions.

CDF-II and B physics

NASA Astrophysics Data System (ADS)

Lockyer, Nigel S.

1998-02-01

This paper reports on the CDF-II B physics goals and new detector systems presently being built for Run-II of the Tevatron collider in the year 2000. The B physics goals are focused towards observing and studying CP violation and B s flavor oscillations. Estimates of expected performance are reported. The new detector systems described are: the 5-layer 3-D silicon vertex detector, the intermedia silicon tracking layers, the central tracking drift chamber, muon system upgrades, and a proposed time-of-flight system.

Shuttle Orbiter-like Cargo Carrier on Crew Launch Vehicle

NASA Technical Reports Server (NTRS)

Martinovic, Zoran

2009-01-01

The following document summarizes the results of a conceptual design study for which the goal was to investigate the possibility of using a crew launch vehicle to deliver the remaining International Space Station elements should the Space Shuttle orbiter not be available to complete that task. Conceptual designs and structural weight estimates for two designs are presented. A previously developed systematic approach that was based on finite-element analysis and structural sizing was used to estimate growth of structural weight from analytical to "as built" conditions.

PIXE, PIGE and NMR study of the masonry of the pyramid of Cheops at Giza

NASA Astrophysics Data System (ADS)

Demortier, Guy

2004-11-01

The mystery of the construction of the great pyramids of Egypt could be elucidated by physico-chemical measurements on small pieces of the material. In this paper, we give several arguments against the present point of view of most Egyptologists who do not admit another method than hewn blocks. We give several pieces of evidence that the masonry was entirely built by a moulding procedure involving the use of ingredients that were all available in the region of Cairo.

Associations Between the Built Environment and Objective Measures of Sleep: The Multi-Ethnic Study of Atherosclerosis.

PubMed

Johnson, Dayna A; Hirsch, Jana A; Moore, Kari A; Redline, Susan; Diez Roux, Ana V

2018-05-01

Although dense neighborhood built environments support increased physical activity and lower obesity, these features may also disturb sleep. Therefore, we sought to understand the association between the built environment and objectively measured sleep. From 2010 to 2013, we analyzed data from examination 5 of the Multi-Ethnic Study of Atherosclerosis, a diverse population from 6 US cities. We fit multilevel models that assessed the association between the built environment (Street Smart Walk Score, social engagement destinations, street intersections, and population density) and sleep duration or efficiency from 1-week wrist actigraphy in 1,889 individuals. After adjustment for covariates, a 1-standard-deviation increase in Street Smart Walk Score was associated with 23% higher odds of short sleep duration (≤6 hours; odds ratio = 1.2, 95% confidence interval: 1.0, 1.4), as well as shorter average sleep duration (mean difference = -8.1 minutes, 95% confidence interval: -12.1, -4.2). Results were consistent across other built environment measures. Associations were attenuated after adjustment for survey-based measure of neighborhood noise. Dense neighborhood development may have multiple health consequence. In promoting denser neighborhoods to increase walkability, it is important to also implement strategies that reduce the adverse impacts of this development on sleep, such as noise reductions efforts.

Advances in refrigeration and heat transfer engineering

DOE PAGES

Bansal, Pradeep; Cremaschi, Prof. Lorenzo

2015-05-13

This special edition of Science and Technology for the Built Environment (STBE) presents selected high quality papers that were presented at the 15th International Refrigeration and Air Conditioning Conference held at Purdue University during July 14-17 2014. All papers went through the additional review before being finally accepted for publication in this special issue of Science and Technology and the Built Environment. Altogether 20 papers made to this special issue that cover a wide range of topics, including advancements in alternative refrigerants, heat exchangers/heat transfer, nano-fluids, systems design and optimization and modeling approaches. Although CO 2 may perhaps have beenmore » the most researched and popular refrigerant in the past decade, R32 is being seriously considered lately as an alternative and environmentally friendly refrigerant for small systems due to its low Global Warming Potential (GWP).« less

Advances in refrigeration and heat transfer engineering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bansal, Pradeep; Cremaschi, Prof. Lorenzo

This special edition of Science and Technology for the Built Environment (STBE) presents selected high quality papers that were presented at the 15th International Refrigeration and Air Conditioning Conference held at Purdue University during July 14-17 2014. All papers went through the additional review before being finally accepted for publication in this special issue of Science and Technology and the Built Environment. Altogether 20 papers made to this special issue that cover a wide range of topics, including advancements in alternative refrigerants, heat exchangers/heat transfer, nano-fluids, systems design and optimization and modeling approaches. Although CO 2 may perhaps have beenmore » the most researched and popular refrigerant in the past decade, R32 is being seriously considered lately as an alternative and environmentally friendly refrigerant for small systems due to its low Global Warming Potential (GWP).« less

Applications of intelligent computer-aided training

NASA Technical Reports Server (NTRS)

Loftin, R. B.; Savely, Robert T.

1991-01-01

Intelligent computer-aided training (ICAT) systems simulate the behavior of an experienced instructor observing a trainee, responding to help requests, diagnosing and remedying trainee errors, and proposing challenging new training scenarios. This paper presents a generic ICAT architecture that supports the efficient development of ICAT systems for varied tasks. In addition, details of ICAT projects, built with this architecture, that deliver specific training for Space Shuttle crew members, ground support personnel, and flight controllers are presented. Concurrently with the creation of specific ICAT applications, a general-purpose software development environment for ICAT systems is being built. The widespread use of such systems for both ground-based and on-orbit training will serve to preserve task and training expertise, support the training of large numbers of personnel in a distributed manner, and ensure the uniformity and verifiability of training experiences.

The Schools That Fear Built.

ERIC Educational Resources Information Center

Nevin, David; Bills, Robert E.

This book contains a full discussion on the new private schools established in the South in the wake of integration orders. These schools are known as segregationist academies. The book is divided into two parts. Each was done separately and by a different author. The first part presents a qualitative report designed to present a clear and graphic…

Using crosscorrelation techniques to determine the impulse response of linear systems

NASA Technical Reports Server (NTRS)

Dallabetta, Michael J.; Li, Harry W.; Demuth, Howard B.

1993-01-01

A crosscorrelation method of measuring the impulse response of linear systems is presented. The technique, implementation, and limitations of this method are discussed. A simple system is designed and built using discrete components and the impulse response of a linear circuit is measured. Theoretical and software simulation results are presented.

Self-Presentation, Interpersonal Perception, and Partner Selection in Computer-Mediated Relationship Formation

ERIC Educational Resources Information Center

Fiore, Andrew Rocco Tresolini

2010-01-01

The use of social and technological intermediaries to seek intimate partners has a long history. Yet the affordances and limitations of modern computer-mediated communication (CMC) systems built for this purpose--specifically, online dating sites--present new challenges and opportunities for those who use them to initiate intimate relationships.…

Potential Climate Change Impacts on the Built Environment in the United States and Implications for Sustainability

NASA Astrophysics Data System (ADS)

Quattrochi, D.

2012-12-01

The built environment consists of components that have been made by humans at a range of scales from small (e.g., houses, shopping malls) to large (e.g., transportation networks) to highly modified landscapes such as cities. The impacts of climate change on the built environment, therefore, may have a multitude of effects on humans and the land. The impact of climate change may be exacerbated by the interaction of different events that singly may be minor, but together may have a synergistic set of impacts that are significant. Also, there may be feedback mechanisms wherein the built environment, particularly in the form of cities, may affect weather and the climate on local and regional scales. Besides having a host of such interactions, the impacts of climate change on urban areas will likely have thresholds, below which effects are incidental or of mild consequence, but beyond which the effects quickly become major. Hence, a city may be able to cope with prolonged heat waves, but if this is combined with severe drought, the overall result could be significant or even catastrophic, as accelerating demand for energy to cooling taxes water supplies needed both for energy supply and municipal water needs. Moreover, urban areas may be affected by changes in daily and seasonal high or low temperatures or precipitation, which may have a much more prolonged impact than the direct effect of these events. Thus, the cumulative impacts of multiple events may be more severe than those of any single event. Primary hazards include sea level rise and coastal storms, heat waves, intense precipitation, drought, extreme wind events, urban heat islands, and secondary air pollutants, and cold air events including frozen precipitation. Indicators need to be developed to provide a consistent, objective, and transparent overview of major variations in climate impacts, vulnerabilities, adaptation, and mitigation activities. Overall, indicators of climate change on the built environment should: 1) provide meaningful, authoritative climate-relevant measures about the status, rates, and trends of key physical, ecological, and societal variables and values to inform decisions on management, research, and education at regional to national scales; 2) identify climate-related conditions and impacts to help develop effective mitigation and adaptation measures and reduce costs of management; and 3) document and communicate the climate-driven dynamic nature and condition of Earth's systems and societies, and provide a coordinated. This presentation will provide an overview of possible climate impacts on the built environment. Also, given that spatial analysis and remote sensing techniques will be of paramount importance in assessing these impacts and in preparing adaptation strategies, the presentation will provide examples of how these techniques can be used to identify potential impacts of climate change on the built environment.

Extended preoperative patient education using a multimedia DVD-impact on patients receiving a laparoscopic cholecystectomy: a randomised controlled trial.

PubMed

Wilhelm, D; Gillen, S; Wirnhier, H; Kranzfelder, M; Schneider, A; Schmidt, A; Friess, H; Feussner, H

2009-03-01

The informed consent is a legal requirement prior to surgery and should be based on an extensive preoperative interview. Multimedia productions can therefore be utilised as supporting tool. In a prospective randomised trial, we evaluated the impact of an extended education on patients undergoing cholecystectomy. For extended patient information, a professionally built DVD was used. After randomisation to either the DVD or the control group, patients were informed with or without additional presentation of the DVD. The quality of education was evaluated using a purpose-built questionnaire. One hundred fourteen patients were included in the DVD and 98 in the control group. Patient characteristics did not differ significantly despite a higher educational level in the DVD group. The score of correctly answered questions was higher in the DVD group (19.88 vs. 17.58 points, p < 0.001). As subgroup analysis revealed, particular patient characteristics additionally impacted on results. Patients should be informed the most extensively prior to any surgical procedure. Multimedia productions therefore offer a suitable instrument. In the presented study, we could prove the positive impact of an information DVD on patients knowledge. Nevertheless, multimedia tools cannot replace personal interaction and should only be used to support daily work.

The RFad Method--a new fatigue recovery time assessment for industrial activities.

PubMed

Silva e Santos, Marcello; Vidal, Mario Cesar Rodriguez; Moreira, Sergio Bastos

2012-01-01

This paper presents a study about fatigue recovery time assessment processes in work activities. It came about due to a demand presented by an automotive industry giant, in need of updating existing cycle time sheets and TAKT time parameters. The company decided to hire an Ergonomics Laboratory with ties to a major Brazilian University in order to evaluate current conditions and establish a new method to either calculate recovery times or validate existing assessment criteria, based in the ergonomics evaluation of the work activities. It is clear that there has been evident evolution in the industrial sector in the past two decades. It brought up fast modernization of industrial processes, not only in production but also in terms of management systems. Due to improved computer and robotics systems, combined with overall operational advancements - like the use of lighter hand tools and more effective hoist systems - most work activities have had its physical effort requirements reduced in the past decades. Thus, compensation factors built into production times need to be reviewed in order to avoid unnecessary costs associated to them. By using ergonomics considerations, we prevent simply removing the physical variables built in rest time calculations without taking on account, for example, additional cognitive load represented by the use of more sophisticated pieces of equipment.

Wireless hydrotherapy smart suit for monitoring handicapped people

NASA Astrophysics Data System (ADS)

Correia, Jose H.; Mendes, Paulo M.

2005-02-01

This paper presents a smart suit, water impermeable, containing sensors and electronics for monitoring handicapped people at hydrotherapy sessions in swimming-pools. For integration into textiles, electronic components should be designed in a functional, robust and inexpensive way. Therefore, small-size electronics microsystems are a promising approach. The smart suit allows the monitoring of individual biometric data, such as heart rate, temperature and movement of the body. Two solutions for transmitting the data wirelessly are presented: through a low-voltage (3.0 V), low-power, CMOS RF IC (1.6 mm x 1.5 mm size dimensions) operating at 433 MHz, with ASK modulation and a patch antenna built on lossy substrates compatible with integrated circuits fabrication. Two different substrates were used for antenna implementation: high-resistivity silicon (HRS) and Corning Pyrex #7740 glass. The antenna prototypes were built to operate close to the 5 GHz ISM band. They operate at a center frequency of 5.705 GHz (HRS) and 5.995 GHz (Pyrex). The studied parameters were: substrate thickness, substrate losses, oxide thickness, metal conductivity and thickness. The antenna on HRS uses an area of 8 mm2, providing a 90 MHz bandwidth and ~0.3 dBi of gain. On a glass substrate, the antenna uses 12 mm2, provides 100 MHz bandwidth and ~3 dBi of gain.

A Disadvantaged Advantage in Walkability: Findings from Socioeconomic and Geographic Analysis of National Built Environment Data in the United States.

EPA Science Inventory

Urban form-the structure of the built environment-can influence physical activity, yet little is known about how walkable design differs according to neighborhood sociodemographic composition. We studied how walkable urban form varies by neighborhood sociodemographic composition,...

From the Ground Up: Art in American Built Environment Education.

ERIC Educational Resources Information Center

Guilfoil, Joanne K.

2000-01-01

Provides a case for teaching children about local architecture. Describes a specific example called the Kentucky Project as a humanist approach to built environmental education that enabled middle and high school students to study their architectural heritage through a program of videos and related teaching materials. (CMK)

Association between School Policies and Built Environment, and Youth's Participation in Various Types of Physical Activities

ERIC Educational Resources Information Center

Ward, Stephanie; Bélanger, Mathieu; Donovan, Denise; Caissie, Isabelle; Goguen, Julie; Vanasse, Allain

2015-01-01

Background: School environmental characteristics may be associated with youth's participation in different types of physical activities (PAs). This study aimed to identify which school policies and built environmental characteristics were associated with participation in organized, nonorganized, individual, and group-based activities. Methods:…

Electronic media time and sedentary behaviors in children: Findings from the Built Environment and Active Play Study in the Washington DC area.

PubMed

Roberts, Jennifer D; Rodkey, Lindsey; Ray, Rashawn; Knight, Brandon; Saelens, Brian E

2017-06-01

An objective of the Built Environment and Active Play (BEAP) Study was to examine whether home built environment, bedroom electronic presence, parental rules and demographics predicted children's sedentary behavior (SB). In 2014, BEAP Study questionnaires were mailed to 2000 parents of children (7-12 years) within the Washington DC area. SB-Duration (hours/day) and SB-Frequency (days/week) were assessed by two questions with multiple subparts relating to SB activity type (e.g. car riding) and SB companionship (e.g. friends). Built environment, bedroom electronic presence, parental rules and demographic data were obtained through questionnaire items and ordered logistic regression models were used to examine whether these variables were associated with SB. Study sample included 144 children (female (50%); average age (9.7 years); White (56.3%); Black/African-American (23.7%); Asian-Americans (10.4%)). Nearly 40% of the sample reported daily solitary SB with car riding being the most frequently reported type of SB. Children living on streets without a dead-end/cul-de-sac exhibited a higher odds in SB-Duration using electric media [2.61 (CI: 1.31, 5.18)] and having no television in a child's bedroom was associated with a lower odds in SB-Frequency [0.048 (CI: 0.006, 0.393)] and SB-Duration [0.085 (CI: 0.018, 0.395)]. Non-Hispanic/Latino children were also found to have higher odds in solitary SB-Frequency when parental rules of electronic use were modeled [8.56 (CI: 1.11, 66.01)]. Based on results from this cross-sectional study, home neighborhood built environment, bedroom electronic presence and absence of parental rules can significantly predict children's SB.

The Uncertain Geographic Context Problem in the Analysis of the Relationships between Obesity and the Built Environment in Guangzhou

PubMed Central

Zhao, Pengxiang; Zhou, Suhong

2018-01-01

Traditionally, static units of analysis such as administrative units are used when studying obesity. However, using these fixed contextual units ignores environmental influences experienced by individuals in areas beyond their residential neighborhood and may render the results unreliable. This problem has been articulated as the uncertain geographic context problem (UGCoP). This study investigates the UGCoP through exploring the relationships between the built environment and obesity based on individuals’ activity space. First, a survey was conducted to collect individuals’ daily activity and weight information in Guangzhou in January 2016. Then, the data were used to calculate and compare the values of several built environment variables based on seven activity space delineations, including home buffers, workplace buffers (WPB), fitness place buffers (FPB), the standard deviational ellipse at two standard deviations (SDE2), the weighted standard deviational ellipse at two standard deviations (WSDE2), the minimum convex polygon (MCP), and road network buffers (RNB). Lastly, we conducted comparative analysis and regression analysis based on different activity space measures. The results indicate that significant differences exist between variables obtained with different activity space delineations. Further, regression analyses show that the activity space delineations used in the analysis have a significant influence on the results concerning the relationships between the built environment and obesity. The study sheds light on the UGCoP in analyzing the relationships between obesity and the built environment. PMID:29439392

A GIS based model for active transportation in the built environment

NASA Astrophysics Data System (ADS)

Addison, Veronica Marie Medina

Obesity and physical inactivity have been major risk factors associated with morbidity and mortality in the United States. Recently, obesity and physical inactivity have been on the rise. Determining connections between this trend and the environment could lead to a built environment that is conducive to healthy, active people. In my previous research, I have studied the built environment and its connection to health. For my dissertation, I build on this fundamental work by incorporating energy, specifically by studying the built environment and its connection to energy expenditures. This research models the built environment and combines this with human energy expenditure information in order to provide a planning tool that allows an individual to actively address health issues, particularly obesity. This research focuses on the design and development of an internet based model that enables individuals to understand their own energy expenditures in relation to their environment. The model will work to find the energy consumed by an individual in their navigation through campus. This is accomplished by using Geographic Information Systems (GIS) to model the campus and using it as the basis for calculating energy expended through active transportation. Using GIS to create the model allows for the incorporation of built environment factors such as elevation and energy expenditures in relation to physical exertion rate. This research will contribute to the long-term solution to the obesity epidemic by creating healthy communities through smart growth and sustainable design. This research provides users with a tool to use in their current environment for their personal and community well being.

Wind to Hydrogen in California: Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Antonia, O.; Saur, G.

2012-08-01

This analysis presents a case study in California for a large scale, standalone wind electrolysis site. This is a techno-economic analysis of the 40,000 kg/day renewable production of hydrogen and subsequent delivery by truck to a fueling station in the Los Angeles area. This quantity of hydrogen represents about 1% vehicle market penetration for a city such as Los Angeles (assuming 0.62 kg/day/vehicle and 0.69 vehicles/person) [8]. A wind site near the Mojave Desert was selected for proximity to the LA area where hydrogen refueling stations are already built.

Applied Nuclear Accountability Systems: A Case Study in the System Architecture and Development of NuMAC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, Andrea Beth

2004-07-01

This is a case study of the NuMAC nuclear accountability system developed at a private fuel fabrication facility. This paper investigates nuclear material accountability and safeguards by researching expert knowledge applied in the system design and development. Presented is a system developed to detect and deter the theft of weapons grade nuclear material. Examined is the system architecture that includes: issues for the design and development of the system; stakeholder issues; how the system was built and evolved; software design, database design, and development tool considerations; security and computing ethics. (author)

Identifying built environmental patterns using cluster analysis and GIS: relationships with walking, cycling and body mass index in French adults.

PubMed

Charreire, Hélène; Weber, Christiane; Chaix, Basile; Salze, Paul; Casey, Romain; Banos, Arnaud; Badariotti, Dominique; Kesse-Guyot, Emmanuelle; Hercberg, Serge; Simon, Chantal; Oppert, Jean-Michel

2012-05-23

Socio-ecological models suggest that both individual and neighborhood characteristics contribute to facilitating health-enhancing behaviors such as physical activity. Few European studies have explored relationships between local built environmental characteristics, recreational walking and cycling and weight status in adults. The aim of this study was to identify built environmental patterns in a French urban context and to assess associations with recreational walking and cycling behaviors as performed by middle-aged adult residents. We used a two-step procedure based on cluster analysis to identify built environmental patterns in the region surrounding Paris, France, using measures derived from Geographic Information Systems databases on green spaces, proximity facilities (destinations) and cycle paths. Individual data were obtained from participants in the SU.VI.MAX cohort; 1,309 participants residing in the Ile-de-France in 2007 were included in this analysis. Associations between built environment patterns, leisure walking/cycling data (h/week) and measured weight status were assessed using multinomial logistic regression with adjustment for individual and neighborhood characteristics. Based on accessibility to green spaces, proximity facilities and availability of cycle paths, seven built environmental patterns were identified. The geographic distribution of built environmental patterns in the Ile-de-France showed that a pattern characterized by poor spatial accessibility to green spaces and proximity facilities and an absence of cycle paths was found only in neighborhoods in the outer suburbs, whereas patterns characterized by better spatial accessibility to green spaces, proximity facilities and cycle paths were more evenly distributed across the region. Compared to the reference pattern (poor accessibility to green areas and facilities, absence of cycle paths), subjects residing in neighborhoods characterized by high accessibility to green areas and local facilities and by a high density of cycle paths were more likely to walk/cycle, after adjustment for individual and neighborhood sociodemographic characteristics (OR = 2.5 95%CI 1.4-4.6). Body mass index did not differ across patterns. Built environmental patterns were associated with walking and cycling among French adults. These analyses may be useful in determining urban and public health policies aimed at promoting a healthy lifestyle.

How to Simply Demonstrate Diamagnetic Levitation with Pencil Lead

ERIC Educational Resources Information Center

Koudelkova, Vera

2016-01-01

A new simple arrangement how to demonstrate diamagnetic levitation is presented. It uses pencil lead levitating in a track built from neodymium magnets. This arrangement can also be used as a classroom experiment.

The changing patterns of cropland conversion to built-up land in China from 1987 to 2010

NASA Astrophysics Data System (ADS)

Ju, H.; Zhang, Z.; Zhao, X.; Wu, W.; Wang, X.; Zuo, L.

2017-12-01

With the rapid urbanization, industrialization and rural area construction in China, the expansions of built-up land encroached upon a large amount of cropland, and thus placed great challenges on national food security. Previous studies have primarily been focused on the whole effects of built-up land expansion, however, the individual effect of different types of built-up land (urban areas, rural settlements and industrial/transportation land) on cropland loss remains unclear. Based on land use maps interpreted from remote sensing imagery in 1987-2010, we illustrated the spatio-temporal patterns of the speed and the structure of cropland conversion to built-up land. Then, we quantitatively measured the influence of different built-up land on cropland loss from three aspects: the contribution of built-up land expansion to cropland loss, the dependence of built-up land expansion on cropland loss and the conversion's impacts on cropland quality. It was found 42,822 km2 of cropland were converted into built-up land in China, accounting for 43.8% of total cropland loss during 1987-2010. Before 2000, the expansion of rural settlements had the largest influence on cropland loss, however, urban growth showed a greater impact on cropland loss after 2000. Although the effects of rural settlements expansion decreased, rural settlements still saw the highest percentage of the loss of traditional cropland which is generally in high quality. In addition, the impacts of industrial/transportation land expansion increased dramatically and was mainly distributed in major food production regions. These changes were closely related to the economic restructuring, urban-rural transformation and government policies in China. These findings demonstrate that Chinese cropland conservation in both amount and quality should focus not only on finding a reasonable urbanization mode, but also solving the "hollowing village" problem and balancing the industrial transformations in the future.

Health and the Built Environment: Exploring Foundations for a New Interdisciplinary Profession

PubMed Central

Kent, Jennifer; Thompson, Susan

2012-01-01

The supportive role of the built environment for human health is a growing area of interdisciplinary research, evidence-based policy development, and related practice. Nevertheless, despite closely linked origins, the contemporary professions of public health and urban planning largely operate within the neoliberal framework of academic, political, and policy silos. A reinvigorated relationship between the two is fundamental to building and sustaining an effective “healthy built environment profession.” A recent comprehensive review of the burgeoning literature on healthy built environments identified an emergent theme which we have termed “Professional Development.” This literature relates to the development of relationships between health and built environment professionals. It covers case studies illustrating good practice models for policy change, as well as ways professionals can work to translate research into policy. Intertwined with this empirical research is a dialogue on theoretical tensions emerging as health and built environment practitioners and researchers seek to establish mutual understanding and respect. The nature of evidence required to justify policy change, for example, has surfaced as an area of asynchrony between accepted disciplinary protocols. Our paper discusses this important body of research with a view to initiating and supporting the ongoing development of an interdisciplinary profession of healthy planning. PMID:23028393

pH dependent growth of poly( L-lysine)/poly( L-glutamic) acid multilayer films and their cell adhesion properties

NASA Astrophysics Data System (ADS)

Richert, Ludovic; Arntz, Youri; Schaaf, Pierre; Voegel, Jean-Claude; Picart, Catherine

2004-10-01

The short-term interaction of chondrosarcoma cells with (PGA/PLL) polyelectrolyte multilayers was investigated in a serum-containing medium for films built at different pHs and subsequently exposed to the culture medium. The buildup of the films and their stability was first investigated by means of optical waveguide lightmode spectroscopy, quartz crystal microbalance, streaming potential measurements and atomic force microscopy. While film growth is linear at all pHs, after a few layers have been deposited the growth is much larger for the films built at basic pH and even more pronounced for those built at acidic pH. However, these latter films remain stable in the culture medium only if they have been crosslinked prior to the ionic strength and pH jumps. The films built at acidic pH were found to swell in water by about 200% whereas those built at other pHs did not swell in a physiological buffer. For thin films (≈20 nm) built at pH = 7.4, the detachment forces were dependent on the outermost layer, the forces being significantly higher on PLL-ending films than on PGA-ending ones. In contrast, for the thick films built at pH = 4.4 and at pH = 10.4 (thickness of the order of few hundred of nanometers), the detachment forces were independent of the outermost layer of the film. The films built at pH = 10.4, which shrink in contact with salt containing solutions, were highly cell adhesive whereas those built at acidic pH were highly cell resistant. Protein adsorption and film roughness (as measured by AFM) could not explain these striking differences. The high adhesion observed on the film built at pH 10.4 may rather be related to the secondary structure of the film and to its relatively low swellability in water, whereas the cell resistance of the films built at pH 4.4 may be linked to their high swellability. Therefore, for the PGA/PLL films, the cell adhesion properties can be tuned depending on the deposition pH of the polyelectrolyte solutions. This study reveals the importance of the multilayer structure and architecture to control the detachment force of cells onto such films.

Middle School Students' Perceptions of Safety: A Mixed-Methods Study.

PubMed

Sweeney, Shannon M; Von Hagen, Leigh Ann

2015-10-01

Active travel to school has been on the decline, despite its beneficial influence on children's current and future well-being. Adults' safety perceptions have been shown to influence children's active travel. Children's perceptions, particularly of safety, may be an important link not only to their present health and travel behaviors, but also their future health and behaviors. This study examined middle school students' perceptions of the built environment and safety. Overall, 776 students from 3 schools in Hudson County, New Jersey participated in a visual survey and structured, interactive classroom discussions. Emergent themes from the discussions were tested using multivariate statistical models. Findings suggest that older students, boys, and students who self-identified as black, rated built environment scenes as safer. Students also perceived being near adults, traveling in a group, and using crosswalks as significantly safer and want additional recognition of these to further improve safety. Students perceived that being near a school, in daylight, and aesthetics as factors contributing to safety. Schools and municipalities may increase programs for students to travel in groups, prioritize maintenance in school zones, and increase the number of crossing guards, particularly outside the immediate school proximity to further improve safety. © 2015, American School Health Association.

Study on soil-pile-structure-TMD interaction system by shaking table model test

NASA Astrophysics Data System (ADS)

Lou, Menglin; Wang, Wenjian

2004-06-01

The success of the tuned mass damper (TMD) in reducing wind-induced structural vibrations has been well established. However, from most of the recent numerical studies, it appears that for a structure situated on very soft soil, soil-structure interaction (SSI) could render a damper on the structure totally ineffective. In order to experimentally verify the SSI effect on the seismic performance of TMD, a series of shaking table model tests have been conducted and the results are presented in this paper. It has been shown that the TMD is not as effective in controlling the seismic responses of structures built on soft soil sites due to the SSI effect. Some test results also show that a TMD device might have a negative impact if the SSI effect is neglected and the structure is built on a soft soil site. For structures constructed on a soil foundation, this research verifies that the SSI effect must be carefully understood before a TMD control system is designed to determine if the control is necessary and if the SSI effect must be considered when choosing the optimal parameters of the TMD device.

Photocurrent spectroscopy of exciton and free particle optical transitions in suspended carbon nanotube pn-junctions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, Shun-Wen; Theiss, Jesse; Hazra, Jubin

2015-08-03

We study photocurrent generation in individual, suspended carbon nanotube pn-junction diodes formed by electrostatic doping using two gate electrodes. Photocurrent spectra collected under various electrostatic doping concentrations reveal distinctive behaviors for free particle optical transitions and excitonic transitions. In particular, the photocurrent generated by excitonic transitions exhibits a strong gate doping dependence, while that of the free particle transitions is gate independent. Here, the built-in potential of the pn-junction is required to separate the strongly bound electron-hole pairs of the excitons, while free particle excitations do not require this field-assisted charge separation. We observe a sharp, well defined E{sub 11}more » free particle interband transition in contrast with previous photocurrent studies. Several steps are taken to ensure that the active charge separating region of these pn-junctions is suspended off the substrate in a suspended region that is substantially longer than the exciton diffusion length and, therefore, the photocurrent does not originate from a Schottky junction. We present a detailed model of the built-in fields in these pn-junctions, which, together with phonon-assistant exciton dissociation, predicts photocurrents on the same order of those observed experimentally.« less

Residential Greenness and Birth Outcomes: Evaluating the Influence of Spatially Correlated Built-Environment Factors

PubMed Central

Davies, Hugh W.; Frank, Lawrence; Van Loon, Josh; Gehring, Ulrike; Tamburic, Lillian; Brauer, Michael

2014-01-01

Background: Half the world’s population lives in urban areas. It is therefore important to identify characteristics of the built environment that are beneficial to human health. Urban greenness has been associated with improvements in a diverse range of health conditions, including birth outcomes; however, few studies have attempted to distinguish potential effects of greenness from those of other spatially correlated exposures related to the built environment. Objectives: We aimed to investigate associations between residential greenness and birth outcomes and evaluate the influence of spatially correlated built environment factors on these associations. Methods: We examined associations between residential greenness [measured using satellite-derived Normalized Difference Vegetation Index (NDVI) within 100 m of study participants’ homes] and birth outcomes in a cohort of 64,705 singleton births (from 1999–2002) in Vancouver, British Columbia, Canada. We also evaluated associations after adjusting for spatially correlated built environmental factors that may influence birth outcomes, including exposure to air pollution and noise, neighborhood walkability, and distance to the nearest park. Results: An interquartile increase in greenness (0.1 in residential NDVI) was associated with higher term birth weight (20.6 g; 95% CI: 16.5, 24.7) and decreases in the likelihood of small for gestational age, very preterm (< 30 weeks), and moderately preterm (30–36 weeks) birth. Associations were robust to adjustment for air pollution and noise exposures, neighborhood walkability, and park proximity. Conclusions: Increased residential greenness was associated with beneficial birth outcomes in this population-based cohort. These associations did not change after adjusting for other spatially correlated built environment factors, suggesting that alternative pathways (e.g., psychosocial and psychological mechanisms) may underlie associations between residential greenness and birth outcomes. Citation: Hystad P, Davies HW, Frank L, Van Loon J, Gehring U, Tamburic L, Brauer M. 2014. Residential greenness and birth outcomes: evaluating the influence of spatially correlated built-environment factors. Environ Health Perspect 122:1095–1102; http://dx.doi.org/10.1289/ehp.1308049 PMID:25014041

Using built environment characteristics to predict walking for exercise

PubMed Central

Lovasi, Gina S; Moudon, Anne V; Pearson, Amber L; Hurvitz, Philip M; Larson, Eric B; Siscovick, David S; Berke, Ethan M; Lumley, Thomas; Psaty, Bruce M

2008-01-01

Background Environments conducive to walking may help people avoid sedentary lifestyles and associated diseases. Recent studies developed walkability models combining several built environment characteristics to optimally predict walking. Developing and testing such models with the same data could lead to overestimating one's ability to predict walking in an independent sample of the population. More accurate estimates of model fit can be obtained by splitting a single study population into training and validation sets (holdout approach) or through developing and evaluating models in different populations. We used these two approaches to test whether built environment characteristics near the home predict walking for exercise. Study participants lived in western Washington State and were adult members of a health maintenance organization. The physical activity data used in this study were collected by telephone interview and were selected for their relevance to cardiovascular disease. In order to limit confounding by prior health conditions, the sample was restricted to participants in good self-reported health and without a documented history of cardiovascular disease. Results For 1,608 participants meeting the inclusion criteria, the mean age was 64 years, 90 percent were white, 37 percent had a college degree, and 62 percent of participants reported that they walked for exercise. Single built environment characteristics, such as residential density or connectivity, did not significantly predict walking for exercise. Regression models using multiple built environment characteristics to predict walking were not successful at predicting walking for exercise in an independent population sample. In the validation set, none of the logistic models had a C-statistic confidence interval excluding the null value of 0.5, and none of the linear models explained more than one percent of the variance in time spent walking for exercise. We did not detect significant differences in walking for exercise among census areas or postal codes, which were used as proxies for neighborhoods. Conclusion None of the built environment characteristics significantly predicted walking for exercise, nor did combinations of these characteristics predict walking for exercise when tested using a holdout approach. These results reflect a lack of neighborhood-level variation in walking for exercise for the population studied. PMID:18312660

Systematic literature review of built environment effects on physical activity and active transport - an update and new findings on health equity.

PubMed

Smith, Melody; Hosking, Jamie; Woodward, Alistair; Witten, Karen; MacMillan, Alexandra; Field, Adrian; Baas, Peter; Mackie, Hamish

2017-11-16

Evidence is mounting to suggest a causal relationship between the built environment and people's physical activity behaviours, particularly active transport. The evidence base has been hindered to date by restricted consideration of cost and economic factors associated with built environment interventions, investigation of socioeconomic or ethnic differences in intervention effects, and an inability to isolate the effect of the built environment from other intervention types. The aims of this systematic review were to identify which environmental interventions increase physical activity in residents at the local level, and to build on the evidence base by considering intervention cost, and the differential effects of interventions by ethnicity and socioeconomic status. A systematic database search was conducted in June 2015. Articles were eligible if they reported a quantitative empirical study (natural experiment or a prospective, retrospective, experimental, or longitudinal research) investigating the relationship between objectively measured built environment feature(s) and physical activity and/or travel behaviours in children or adults. Quality assessment was conducted and data on intervention cost and whether the effect of the built environment differed by ethnicity or socioeconomic status were extracted. Twenty-eight studies were included in the review. Findings showed a positive effect of walkability components, provision of quality parks and playgrounds, and installation of or improvements in active transport infrastructure on active transport, physical activity, and visits or use of settings. There was some indication that infrastructure improvements may predominantly benefit socioeconomically advantaged groups. Studies were commonly limited by selection bias and insufficient controlling for confounders. Heterogeneity in study design and reporting limited comparability across studies or any clear conclusions to be made regarding intervention cost. Improving neighbourhood walkability, quality of parks and playgrounds, and providing adequate active transport infrastructure is likely to generate positive impacts on activity in children and adults. The possibility that the benefits of infrastructure improvements may be inequitably distributed requires further investigation. Opportunities to improve the quality of evidence exist, including strategies to improve response rates and representativeness, use of valid and reliable measurement tools, cost-benefit analyses, and adequate controlling for confounders.

EvoBuild: A Quickstart Toolkit for Programming Agent-Based Models of Evolutionary Processes

NASA Astrophysics Data System (ADS)

Wagh, Aditi; Wilensky, Uri

2018-04-01

Extensive research has shown that one of the benefits of programming to learn about scientific phenomena is that it facilitates learning about mechanisms underlying the phenomenon. However, using programming activities in classrooms is associated with costs such as requiring additional time to learn to program or students needing prior experience with programming. This paper presents a class of programming environments that we call quickstart: Environments with a negligible threshold for entry into programming and a modest ceiling. We posit that such environments can provide benefits of programming for learning without incurring associated costs for novice programmers. To make this claim, we present a design-based research study conducted to compare programming models of evolutionary processes with a quickstart toolkit with exploring pre-built models of the same processes. The study was conducted in six seventh grade science classes in two schools. Students in the programming condition used EvoBuild, a quickstart toolkit for programming agent-based models of evolutionary processes, to build their NetLogo models. Students in the exploration condition used pre-built NetLogo models. We demonstrate that although students came from a range of academic backgrounds without prior programming experience, and all students spent the same number of class periods on the activities including the time students took to learn programming in this environment, EvoBuild students showed greater learning about evolutionary mechanisms. We discuss the implications of this work for design research on programming environments in K-12 science education.

Effects of buffer size and shape on associations between the built environment and energy balance.

PubMed

James, Peter; Berrigan, David; Hart, Jaime E; Hipp, J Aaron; Hoehner, Christine M; Kerr, Jacqueline; Major, Jacqueline M; Oka, Masayoshi; Laden, Francine

2014-05-01

Uncertainty in the relevant spatial context may drive heterogeneity in findings on the built environment and energy balance. To estimate the effect of this uncertainty, we conducted a sensitivity analysis defining intersection and business densities and counts within different buffer sizes and shapes on associations with self-reported walking and body mass index. Linear regression results indicated that the scale and shape of buffers influenced study results and may partly explain the inconsistent findings in the built environment and energy balance literature. Copyright © 2014 Elsevier Ltd. All rights reserved.

Optimization of Bioethanol Production Using Whole Plant of Water Hyacinth as Substrate in Simultaneous Saccharification and Fermentation Process

PubMed Central

Zhang, Qiuzhuo; Weng, Chen; Huang, Huiqin; Achal, Varenyam; Wang, Duanchao

2016-01-01

Water hyacinth was used as substrate for bioethanol production in the present study. Combination of acid pretreatment and enzymatic hydrolysis was the most effective process for sugar production that resulted in the production of 402.93 mg reducing sugar at optimal condition. A regression model was built to optimize the fermentation factors according to response surface method in saccharification and fermentation (SSF) process. The optimized condition for ethanol production by SSF process was fermented at 38.87°C in 81.87 h when inoculated with 6.11 ml yeast, where 1.291 g/L bioethanol was produced. Meanwhile, 1.289 g/L ethanol was produced during experimentation, which showed reliability of presented regression model in this research. The optimization method discussed in the present study leading to relatively high bioethanol production could provide a promising way for Alien Invasive Species with high cellulose content. PMID:26779125

Development of kinematic equations and determination of workspace of a 6 DOF end-effector with closed-kinematic chain mechanism

NASA Technical Reports Server (NTRS)

Nguyen, Charles C.; Pooran, Farhad J.

1989-01-01

This report presents results from the research grant entitled Active Control of Robot Manipulators, funded by the Goddard Space Flight Center, under Grant NAG5-780, for the period July 1, 1988 to January 1, 1989. An analysis is presented of a 6 degree-of-freedom robot end-effector built to study telerobotic assembly of NASA hardware in space. Since the end-effector is required to perform high precision motion in a limited workspace, closed-kinematic mechanisms are chosen for its design. A closed-form solution is obtained for the inverse kinematic problem and an iterative procedure employing Newton-Raphson method is proposed to solve the forward kinematic problem. A study of the end-effector workspace results in a general procedure for the workspace determination based on link constraints. Computer simulation results are presented.

International variation in neighborhood walkability, transit, and recreation environments using geographic information systems: the IPEN adult study.

PubMed

Adams, Marc A; Frank, Lawrence D; Schipperijn, Jasper; Smith, Graham; Chapman, James; Christiansen, Lars B; Coffee, Neil; Salvo, Deborah; du Toit, Lorinne; Dygrýn, Jan; Hino, Adriano Akira Ferreira; Lai, Poh-chin; Mavoa, Suzanne; Pinzón, José David; Van de Weghe, Nico; Cerin, Ester; Davey, Rachel; Macfarlane, Duncan; Owen, Neville; Sallis, James F

2014-10-25

The World Health Organization recommends strategies to improve urban design, public transportation, and recreation facilities to facilitate physical activity for non-communicable disease prevention for an increasingly urbanized global population. Most evidence supporting environmental associations with physical activity comes from single countries or regions with limited variation in urban form. This paper documents variation in comparable built environment features across countries from diverse regions. The International Physical Activity and the Environment Network (IPEN) study of adults aimed to measure the full range of variation in the built environment using geographic information systems (GIS) across 12 countries on 5 continents. Investigators in Australia, Belgium, Brazil, Colombia, the Czech Republic, Denmark, China, Mexico, New Zealand, Spain, the United Kingdom, and the United States followed a common research protocol to develop internationally comparable measures. Using detailed instructions, GIS-based measures included features such as walkability (i.e., residential density, street connectivity, mix of land uses), and access to public transit, parks, and private recreation facilities around each participant's residential address using 1-km and 500-m street network buffers. Eleven of 12 countries and 15 cities had objective GIS data on built environment features. We observed a 38-fold difference in median residential densities, a 5-fold difference in median intersection densities and an 18-fold difference in median park densities. Hong Kong had the highest and North Shore, New Zealand had the lowest median walkability index values, representing a difference of 9 standard deviations in GIS-measured walkability. Results show that comparable measures can be created across a range of cultural settings revealing profound global differences in urban form relevant to physical activity. These measures allow cities to be ranked more precisely than previously possible. The highly variable measures of urban form will be used to explain individuals' physical activity, sedentary behaviors, body mass index, and other health outcomes on an international basis. Present measures provide the ability to estimate dose-response relationships from projected changes to the built environment that would otherwise be impossible.

Urban area and green space: volume estimation using medium resolution satellite imagery

NASA Astrophysics Data System (ADS)

Handayani, H. H.

2017-12-01

The latest revision of the UN World Urbanization Prospects predicts the world's urban population to increase by 1.4 billion between 2010 and 2030, 60% of the population will live in cities. Consequently, this expansion affects the existence of ecosystem services in the context of sustainability environment. Green space is a focal point of the ecological system and is affected by the urbanization process. The green space has essential functions in cleaning the water, adjusting the microclimate, eliminating noise, and beautifying the surrounding makes the green quantity as well as quality very vital to its existence. The urban expansion leads the growth into vertical development. Therefore, the third dimension using urban volume as an indicator of vertical development is introduced. Therefore, this study estimates the urban and green volume by using medium resolution remote sensing. Surabaya is used as a case study since the city has grown up significantly in both of population and capital investment in this decade. Here, urban and green volume is investigated by ALOS datasets with urban referring built-up. Also, we examine the area with low and high green volume by performing hot and cold spots analysis. The average of built-up volume reaches 173.05 m3/pixel presented by the building for a residential single house with the height less than 7m. The average of green volume is 14.74m3/pixel performed by the vegetation with the height generally 0.6 to 1m which is frequently planted in the backyard of house. However, the ratio of green volume to the built-up volume shows a small portion which is around 8.52%. Therefore, we identify the hot and cold spots, we evaluate 5 areas having cold spot regarding lack of green volume. The two locations of cold spot are located in the northern part and another is in the southern part. Those areas have high number of built-up volume which is in particularly as sub-CBD area. We emphasize that the improvement of green quantity is needed in those areas, in order to enhance the green quantity and also for the city's image improvement.

The effectiveness of radon preventive and remedial measures in Irish homes.

PubMed

Long, S; Fenton, D; Cremin, M; Morgan, A

2013-03-01

It is estimated that approximately 100 000 Irish homes have radon concentrations above the reference level of 200 Bq m(-3). To minimise the number of new homes with this problem, building regulations require that all new homes built since July 1998 in high radon areas are installed with radon barriers during construction. Measurements on local authority homes in a number of high radon areas have allowed the impact of these new regulations to be assessed. In County Cork a reduction of up to 70% in the mean radon concentration was observed in homes built since 1998 relative to those built before this date. A reduction in both the number of homes exceeding the reference level and the maximum concentration measured in homes was also measured. Homes exceeding the reference level were remediated with the use of an active sump. The results of this remedial work are also presented and show that the mean reduction in radon concentration achieved was 92%.

Optimization of Polycyclic Aromatic Hydrocarbon (PAH) Extraction Efficiency Parameters for Sub- and Supercritical Water Extraction (SCWE) Instrument

NASA Technical Reports Server (NTRS)

Okada, Asahi A.

2005-01-01

Polycyclic aromatic hydrocarbons are a class of molecules composed of multiple, bonded benzene rings. As PAHS are believed to be present on Mars, positive confirmation of their presence on Mars is highly desirable. To extract PAHS, which have low volatility, a fluid extraction method is ideal, and one that does not utilize organic solvents is especially ideal for in situ instrumental analysis. The use of water as a solvent, which at subcritical pressures and temperatures is relatively non-Polar, has significant potential. As SCWE instruments have not yet been commercialized, all instruments are individually-built research prototypes: thus, initial efforts were intended to determine if extraction efficiencies on the JPL-built laboratory-scale SCWE instrument are comparable to differing designs built elsewhere. Samples of soil with certified reference concentrations of PAHs were extracted using SCWE as well as conventional Soxhlet extraction. Continuation of the work would involve extractions on JPL'S newer, portable SCWE instrument prototype to determine its efficiency in extracting PAHs.

Searching for Cost-Optimized Interstellar Beacons

NASA Astrophysics Data System (ADS)

Benford, Gregory; Benford, James; Benford, Dominic

2010-06-01

What would SETI beacon transmitters be like if built by civilizations that had a variety of motives but cared about cost? In a companion paper, we presented how, for fixed power density in the far field, a cost-optimum interstellar beacon system could be built. Here, we consider how we should search for a beacon if it were produced by a civilization similar to ours. High-power transmitters could be built for a wide variety of motives other than the need for two-way communication; this would include beacons built to be seen over thousands of light-years. Extraterrestrial beacon builders would likely have to contend with economic pressures just as their terrestrial counterparts do. Cost, spectral lines near 1 GHz, and interstellar scintillation favor radiating frequencies substantially above the classic "water hole." Therefore, the transmission strategy for a distant, cost-conscious beacon would be a rapid scan of the galactic plane with the intent to cover the angular space. Such pulses would be infrequent events for the receiver. Such beacons built by distant, advanced, wealthy societies would have very different characteristics from what SETI researchers seek. Future searches should pay special attention to areas along the galactic disk where SETI searches have seen coherent signals that have not recurred on the limited listening time intervals we have used. We will need to wait for recurring events that may arriarrive in intermittent bursts. Several new SETI search strategies have emerged from these ideas. We propose a new test for beacons that is based on the Life Plane hypotheses.

Searching for Cost-Optimized Interstellar Beacons

NASA Technical Reports Server (NTRS)

Benford, Gregory; Benford, James; Benford, Dominic

2010-01-01

What would SETI beacon transmitters be like if built by civilizations that had a variety of motives but cared about cost? In a companion paper, we presented how, for fixed power density in the far field, a cost-optimum interstellar beacon system could be built. Here, we consider how we should search for a beacon if it were produced by a civilization similar to ours. High-power transmitters could be built for a wide variety of motives other than the need for two-way communication, this would include beacons built to be seen over thousands of light-years. Extraterrestrial beacon builders would likely have to contend with economic pressures just as their terrestrial counterparts do. Cost, spectral lines near 1GHz, and interstellar scintillation favor radiating frequencies substantially above the classic "water hole." Therefore, the transmission strategy for a distant, cost-conscious beacon would be a rapid scan of the galactic plane with the intent to cover the angular space. Such pulses would be infrequent events for the receiver. Such beacons built by distant, advanced, wealthy societies would have very different characteristics from what SETI researchers seek. Future searches should pay special attention to areas along the galactic disk where SETI searches have seen coherent signals that have not recurred on the limited listening time intervals we have used. We will need to wait for recurring events that may arrive in intermittent bursts. Several new SETI search strategies have emerged from these ideas. We propose a new test for beacons that is based on the Life Plane hypotheses.

Searching for cost-optimized interstellar beacons.

PubMed

Benford, Gregory; Benford, James; Benford, Dominic

2010-06-01

What would SETI beacon transmitters be like if built by civilizations that had a variety of motives but cared about cost? In a companion paper, we presented how, for fixed power density in the far field, a cost-optimum interstellar beacon system could be built. Here, we consider how we should search for a beacon if it were produced by a civilization similar to ours. High-power transmitters could be built for a wide variety of motives other than the need for two-way communication; this would include beacons built to be seen over thousands of light-years. Extraterrestrial beacon builders would likely have to contend with economic pressures just as their terrestrial counterparts do. Cost, spectral lines near 1 GHz, and interstellar scintillation favor radiating frequencies substantially above the classic "water hole." Therefore, the transmission strategy for a distant, cost-conscious beacon would be a rapid scan of the galactic plane with the intent to cover the angular space. Such pulses would be infrequent events for the receiver. Such beacons built by distant, advanced, wealthy societies would have very different characteristics from what SETI researchers seek. Future searches should pay special attention to areas along the galactic disk where SETI searches have seen coherent signals that have not recurred on the limited listening time intervals we have used. We will need to wait for recurring events that may arrive in intermittent bursts. Several new SETI search strategies have emerged from these ideas. We propose a new test for beacons that is based on the Life Plane hypotheses.

Built Environment and Obesity by Urbanicity in the U.S

PubMed Central

Xu, Yanqing; Wang, Fahui

2015-01-01

Based on the data from the Behavioral Risk Factor Surveillance System 2012, this study examines the association of neighborhood built environments with individual physical inactivity and obesity in the U.S. Multilevel modeling is used to control for the effects of individual socio-demographic characteristics. Neighborhood variables include built environment, poverty level and urbanicity at the county level. Among the built environment variables, a poorer street connectivity and a more prominent presence of fast-food restaurants are associated with a higher obesity risk (especially for areas of certain urbanicity levels). Analysis of data subsets divided by areas of different urbanicity levels and by gender reveals the variability of effects of independent variables, more so for the neighborhood variables than individual variables. This implies that some obesity risk factors are geographically specific and vary between men and women. The results lend support to the role of built environment in influencing people’s health behavior and outcome, and promote public policies that need to be geographically adaptable and sensitive to the diversity of demographic groups. PMID:25864019

Built environment and obesity by urbanicity in the U.S.

PubMed

Xu, Yanqing; Wang, Fahui

2015-07-01

Based on the data from the Behavioral Risk Factor Surveillance System 2012, this study examines the association of neighborhood built environments with individual physical inactivity and obesity in the U.S. Multilevel modeling is used to control for the effects of individual socio-demographic characteristics. Neighborhood variables include built environment, poverty level and urbanicity at the county level. Among the built environment variables, a poorer street connectivity and a more prominent presence of fast-food restaurants are associated with a higher obesity risk (especially for areas of certain urbanicity levels). Analysis of data subsets divided by areas of different urbanicity levels and by gender reveals the variability of effects of independent variables, more so for the neighborhood variables than individual variables. This implies that some obesity risk factors are geographically specific and vary between men and women. The results lend support to the role of built environment in influencing people's health behavior and outcome, and promote public policies that need to be geographically adaptable and sensitive to the diversity of demographic groups. Copyright © 2015 Elsevier Ltd. All rights reserved.

Analysis and Design of Phase Change Thermal Control for Light Emitting Diode (LED) Spacesuit Helmet Lights

NASA Technical Reports Server (NTRS)

Bue, Grant C.; Nguyen, Hiep X.; Keller, John R.

2010-01-01

LED Helmet Extravehicular Activity Helmet Interchangeable Portable (LEHIP) lights for the Extravehicular Mobility Unit (EMU) have been built and tested and are currently being used on the International Space Station. A design is presented of the passive thermal control system consisting of a chamber filled with aluminum foam and wax. A thermal math model of LEHIP was built and correlated by test to show that the thermal design maintains electronic components within hot and cold limits for a 7 hour spacewalk in the most extreme EVA average environments, and do not pose a hazard to the crew or to components of the EMU.

Feasibility Study of Graphite Epoxy Antenna for a Microwave Limb Sounder Radiometer (MLSR)

NASA Technical Reports Server (NTRS)

1979-01-01

Results are presented of a feasibility study to design graphite epoxy antenna reflectors for a jet propulsion laboratory microwave limb sounder instrument (MLSR). Two general configurations of the offset elliptic parabolic reflectors are presented that will meet the requirements on geometry and reflector accuracy. The designs consist of sandwich construction for the primary reflectors, secondary reflector support structure and cross-tie members between reflector pairs. Graphite epoxy materials of 3 and 6 plies are used in the facesheets of the sandwich. An aluminum honeycomb is used for the core. A built-in adjustment system is proposed to reduce surface distortions during assembly. The manufacturing and environmental effects are expected to result in surface distortions less than .0015 inch and pointing errors less than .002 degree.

Taxometric analyses of pedophilia utilizing self-report, behavioral, and sexual arousal indicators.

PubMed

Stephens, Skye; Leroux, Elisabeth; Skilling, Tracey; Cantor, James M; Seto, Michael C

2017-11-01

Pedophilia refers to the recurrent, intense sexual interest in prepubescent children who, by definition, have not developed any secondary sex characteristics. Researchers have begun to investigate whether persons with pedophilia are qualitatively different from those without pedophilia (pedophilia is a taxon) or if people vary in their level of sexual interest toward children (pedophilia is dimensional). Two relatively small studies have previously attempted to address this question, but produced conflicting results. The present study built on these studies with a substantially larger sample of 2,227 men who committed sexual offenses and were assessed at a sexual behavior clinic. The present study also examined a broader range of measures more closely approximating the diagnostic criteria for pedophilic disorder, including phallometric assessment of sexual arousal patterns. The results of 3 taxometric analyses did not find support for the assertion that pedophilia is a taxon. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Web-based Teaching Radio Interferometer for Africa

NASA Astrophysics Data System (ADS)

Carignan, Claude; Libert, Yannick

2016-10-01

This presentation describes the web-based Teaching Radio Interferometer being built on the campus of the University of Cape Town, in South Africa, to train the future users of the African VLBI (Very Long Baseline Interferometry) Network (AVN).

Ecological intereactions of reef building corals

EPA Science Inventory

Coral reefs are very important marine ecosystems because they support tremendous biodiversity and reefs are critical economic resources many coastal nations. Tropical reef structures are largely built by stony corals. This presentation provides background on basic coral biology t...

Fabrication of the Appalachian Thinner

Treesearch

Cleveland J. Biller

1982-01-01

The Appalachian Thinner, a prototype cable yarder, has proven capable of harvesting timber on steep slopes. Details of the fabrication of the prototype yarder are presented. An Appalachian Thinner can be built economically in a typical logger's repair shop.

Making an Inexpensive Skeleton for the Classroom.

ERIC Educational Resources Information Center

Shaw, Edward L., Jr.; Pruitt, Nancy E.

1990-01-01

Presented is an activity in which a skeleton is built using papier mache' and various household items. The materials; procedures for building each part of the skeleton; and directions for painting, assembling, and varnishing are included. (KR)

A Technique Oriented Freshman Laboratory Program

ERIC Educational Resources Information Center

Palma, R. J., Sr.

1975-01-01

Describes a program built on the philosophy that laboratory exercises were to be exclusively reserved for those concepts which could not be taught more effectively by other pedagogical techniques. Presents faculty and student criticisms of the program. (GS)

Monitoring of the electrical parameters in off-grid solar power system

NASA Astrophysics Data System (ADS)

Idzkowski, Adam; Leoniuk, Katarzyna; Walendziuk, Wojciech

2016-09-01

The aim of this work was to make a monitoring dedicated to an off-grid installation. A laboratory set, which was built for that purpose, was equipped with a PV panel, a battery, a charge controller and a load. Additionally, to monitor electrical parameters from this installation there were used: LabJack module (data acquisition card), measuring module (self-built) and a computer with a program, which allows to measure and present the off-grid installation parameters. The program was made in G language using LabVIEW software. The designed system enables analyzing the currents and voltages of PV panel, battery and load. It makes also possible to visualize them on charts and to make reports from registered data. The monitoring system was also verified by a laboratory test and in real conditions. The results of this verification are also presented.

Performance and Accuracy of Lightweight and Low-Cost GPS Data Loggers According to Antenna Positions, Fix Intervals, Habitats and Animal Movements

PubMed Central

Forin-Wiart, Marie-Amélie; Hubert, Pauline; Sirguey, Pascal; Poulle, Marie-Lazarine

2015-01-01

Recently developed low-cost Global Positioning System (GPS) data loggers are promising tools for wildlife research because of their affordability for low-budget projects and ability to simultaneously track a greater number of individuals compared with expensive built-in wildlife GPS. However, the reliability of these devices must be carefully examined because they were not developed to track wildlife. This study aimed to assess the performance and accuracy of commercially available GPS data loggers for the first time using the same methods applied to test built-in wildlife GPS. The effects of antenna position, fix interval and habitat on the fix-success rate (FSR) and location error (LE) of CatLog data loggers were investigated in stationary tests, whereas the effects of animal movements on these errors were investigated in motion tests. The units operated well and presented consistent performance and accuracy over time in stationary tests, and the FSR was good for all antenna positions and fix intervals. However, the LE was affected by the GPS antenna and fix interval. Furthermore, completely or partially obstructed habitats reduced the FSR by up to 80% in households and increased the LE. Movement across habitats had no effect on the FSR, whereas forest habitat influenced the LE. Finally, the mean FSR (0.90 ± 0.26) and LE (15.4 ± 10.1 m) values from low-cost GPS data loggers were comparable to those of built-in wildlife GPS collars (71.6% of fixes with LE < 10 m for motion tests), thus confirming their suitability for use in wildlife studies. PMID:26086958

Introducing Live ePortfolios to Support Self Organised Learning

ERIC Educational Resources Information Center

Kirkham, Thomas; Winfield, Sandra; Smallwood, Angela; Coolin, Kirstie; Wood, Stuart; Searchwell, Louis

2009-01-01

This paper presents a platform on which a new generation of applications targeted to aid the self-organised learner can be presented. The new application is enabled by innovations in trust-based security of data built upon emerging infrastructures to aid federated data access in the UK education sector. Within the proposed architecture, users and…

Analyzing the Relationships between Culture and Mentoring

ERIC Educational Resources Information Center

Kochan, Frances

2013-01-01

The purpose of this manuscript is to present a theoretical model of culture from which a conceptual framework has been built that can be used to conduct a cultural analysis. The paper presents definitions and components of culture and its role in our expanding global society. It then relates these to research findings related to the relationship…

Mean sea-level rise impacts on Santos Bay, Southeastern Brazil--physical modelling study.

PubMed

Alfredini, Paolo; Arasaki, Emilia; do Amaral, Rogério Fernando

2008-09-01

The greenhouse effect and resulting increase in the Earth's temperature may accelerate the mean sea-level rise. The natural response of bays and estuaries to this rise, such as this case study of Santos Bay (Brazil), will include change in shoreline position, land flooding and wetlands impacts. The main impacts of this scenario were studied in a physical model built in the Coastal and Harbour Division of Hydraulic Laboratory, University of São Paulo, and the main conclusions are presented in this paper. The model reproduces near 1,000 km(2) of the study area, including Santos, São Vicente, Praia Grande, Cubatão, Guarujá and Bertioga cities.

Mass Spectrometry-Based Visualization of Molecules Associated with Human Habitats.

PubMed

Petras, Daniel; Nothias, Louis-Félix; Quinn, Robert A; Alexandrov, Theodore; Bandeira, Nuno; Bouslimani, Amina; Castro-Falcón, Gabriel; Chen, Liangyu; Dang, Tam; Floros, Dimitrios J; Hook, Vivian; Garg, Neha; Hoffner, Nicole; Jiang, Yike; Kapono, Clifford A; Koester, Irina; Knight, Rob; Leber, Christopher A; Ling, Tie-Jun; Luzzatto-Knaan, Tal; McCall, Laura-Isobel; McGrath, Aaron P; Meehan, Michael J; Merritt, Jonathan K; Mills, Robert H; Morton, Jamie; Podvin, Sonia; Protsyuk, Ivan; Purdy, Trevor; Satterfield, Kendall; Searles, Stephen; Shah, Sahil; Shires, Sarah; Steffen, Dana; White, Margot; Todoric, Jelena; Tuttle, Robert; Wojnicz, Aneta; Sapp, Valerie; Vargas, Fernando; Yang, Jin; Zhang, Chao; Dorrestein, Pieter C

2016-11-15

The cars we drive, the homes we live in, the restaurants we visit, and the laboratories and offices we work in are all a part of the modern human habitat. Remarkably, little is known about the diversity of chemicals present in these environments and to what degree molecules from our bodies influence the built environment that surrounds us and vice versa. We therefore set out to visualize the chemical diversity of five built human habitats together with their occupants, to provide a snapshot of the various molecules to which humans are exposed on a daily basis. The molecular inventory was obtained through untargeted liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis of samples from each human habitat and from the people that occupy those habitats. Mapping MS-derived data onto 3D models of the environments showed that frequently touched surfaces, such as handles (e.g., door, bicycle), resemble the molecular fingerprint of the human skin more closely than other surfaces that are less frequently in direct contact with humans (e.g., wall, bicycle frame). Approximately 50% of the MS/MS spectra detected were shared between people and the environment. Personal care products, plasticizers, cleaning supplies, food, food additives, and even medications that were found to be a part of the human habitat. The annotations indicate that significant transfer of chemicals takes place between us and our built environment. The workflows applied here will lay the foundation for future studies of molecular distributions in medical, forensic, architectural, space exploration, and environmental applications.

Ayurvedic hydro-alcoholic anti-asthmatic medicine Vasarishta built upon Mritasanjeevani Sura: Development and evaluation

PubMed Central

Wele, Asmita A.; Pendse, Nikhil U.; Takle, Shrikant P.; Burase, Raghunath V.; Patil, Sanjay V.; Bhalerao, Supriya; Harsulkar, Abhay M.

2015-01-01

Introduction: Vasarishta built upon Mritasanjeevani Sura (MS) is a polyherbal hydro-alcoholic anti-asthmatic formulation which is administered in a dose of 1 ml instead of standard dose 40 ml, generally advocated for any “Asava–Arishta” in Ayurveda. Aim: The present study was aimed at finding out rationale for the peculiar distillation process to manufacture MS followed by Sthapana process to make Vasarishta. It was further aimed to find out difference in Vasarishta samples manufactured by purely fermentation process and the peculiar method mentioned above. Materials and Methods: Three batches of MS and subsequently three batches of Vasarishta were prepared. Basic standardization and development of standard operating procedure for the same were achieved by doing pH, percentage of alcohol and total reducing sugar, specific gravity on both MS and Vasarishta, during and after completion of process. Finally, MS and Vasarishta (built upon MS) made in laboratory were compared with marketed samples of MS and Vasarishta using gas chromatography. Results: The types of alcohols and volatile acids in MS and Vasarishta, prepared in laboratory, are similar but the proportions differ, which is taken as an indicator of process standardization. Values of furfural, ethyl acetate, and 1-butanol in lab samples are within permissible limits as against the values of the market samples. Conclusions: The textual process for the production of Vasarishta proved to produce organoleptically acceptable product which is virtually free of toxic compounds such as furfural. PMID:27313419

Estimating the effects of light rail transit on health care costs.

PubMed

Stokes, Robert J; MacDonald, John; Ridgeway, Greg

2008-03-01

In recent years, there has been a proliferation of research on the effects of the built environment, including mass transit systems, on health-related outcomes. While there is general agreement that the built environment affects travel choices and physical activity, it remains unclear how much of a public health benefit (in dollars) can be derived from land use policies that support walking, biking, and transit. In the present study, we develop a model to assess the potential cost savings in public health that will be realized from the investment in a new light rail transit system in Charlotte, NC. Relying on estimates of future riders, area obesity rates, and the effects of public transit on physical activity (daily walking to and from the transit stations), we simulated the potential yearly public health cost savings associated with this infrastructure investment. Our results indicate that investing in light rail is associated with a 9-year cumulative public health cost savings of dollars 12.6 million. While these results suggest that there is a sizable public health benefit associated with the adoption of light rail, they also indicate that the effects are relatively small compared to the costs associated with constructing and operating such systems. These findings suggest that planning efforts that focus solely on the health impact of modifications in the built environment are likely to overstate the economic benefits. Public health benefits should be considered along with broader environmental health benefits.

PVUSA: The value of photovoltaics in the distribution system. The Kerman Grid-Support Project

NASA Astrophysics Data System (ADS)

Wenger, Howard J.; Hoff, Thomas E.

1995-05-01

As part of the Photovoltaics for Utility Scale Applications Applications (PVUSA) Project Pacific Gas Electric Company (PG&E) built the Kerman 500-kW photovoltaic power plant. Located near the end of a distribution feeder in a rural section of Fresno County, the plant was not built so much to demonstrate PV technology, but to evaluate its interaction with the local distribution grid and quantify available nontraditional grid-support benefits (those other than energy and capacity). As demand for new generation began to languish in the 1980s, and siting and permitting of power plants and transmission lines became more involved, utilities began considering smaller, distributed power sources. Potential benefits include shorter construction lead time, less capital outlay, and better utilization of existing assets. The results of a PG&E study in 1990/1991 of the benefits from a PV system to the distribution grid prompted the PVUSA Project to construct a plant at Kerman. Completed in 1993, the plant is believed to be the first one specifically built to evaluate the multiple benefits to the grid of a strategically sited plant. Each of nine discrete benefits were evaluated in detail by first establishing the technical impact, then translating the results into present economic value. Benefits span the entire system from distribution feeder to the generation fleet. This work breaks new ground in evaluation of distributed resources, and suggests that resource planning practices be expanded to account for these non-traditional benefits.

Spatio-temporal footprints of urbanisation in Surat, the Diamond City of India (1990-2009).

PubMed

Sharma, Richa; Ghosh, Aniruddha; Joshi, Pawan Kumar

2013-04-01

Urbanisation is a ubiquitous phenomenon with greater prominence in developing nations. Urban expansion involves land conversions from vegetated moisture-rich to impervious moisture-deficient land surfaces. The urban land transformations alter biophysical parameters in a mode that promotes development of heat islands and degrades environmental health. This study elaborates relationships among various environmental variables using remote sensing dataset to study spatio-temporal footprint of urbanisation in Surat city. Landsat Thematic Mapper satellite data were used in conjugation with geo-spatial techniques to study urbanisation and correlation among various satellite-derived biophysical parameters, [Normalised Difference Vegetation Index, Normalised Difference Built-up Index, Normalised Difference Water Index, Normalised Difference Bareness Index, Modified NDWI and land surface temperature (LST)]. Land use land cover was prepared using hierarchical decision tree classification with an accuracy of 90.4 % (kappa = 0.88) for 1990 and 85 % (kappa = 0.81) for 2009. It was found that the city has expanded over 42.75 km(2) within a decade, and these changes resulted in elevated surface temperatures. For example, transformation from vegetation to built-up has resulted in 5.5 ± 2.6 °C increase in land surface temperature, vegetation to fallow 6.7 ± 3 °C, fallow to built-up is 3.5 ± 2.9 °C and built-up to dense built-up is 5.3 ± 2.8 °C. Directional profiling for LST was done to study spatial patterns of LST in and around Surat city. Emergence of two new LST peaks for 2009 was observed in N-S and NE-SW profiles.

Independent and joint associations between multiple measures of the built and social environment and physical activity in a multi-ethnic urban community.

PubMed

Schulz, Amy; Mentz, Graciela; Johnson-Lawrence, Vicki; Israel, Barbara A; Max, Paul; Zenk, Shannon N; Wineman, Jean; Marans, Robert W

2013-10-01

Physical activity is associated with reduced risk of a number of health outcomes, yet fewer than half of adults in the United States report recommended levels of physical activity. Analyses of structural characteristics of the built environment as correlates of physical activity have yielded mixed results. We examine associations between multiple aspects of urban neighborhood environments and physical activity in order to understand their independent and joint effects, with a focus on the extent to which the condition of the built environment and indicators of the social environment modify associations between structural characteristics and physical activity. We use data from a stratified, multi-stage proportional probability sample of 919 non-Hispanic Black, non-Hispanic White, and Hispanic adults in an urban community, observational data from their residential neighborhoods, and census data to examine independent and joint associations of structural characteristics (e.g., street network connectivity), their condition (e.g., sidewalk condition), and social environments (e.g., territoriality) with physical activity. Our findings suggest that sidewalk condition is associated with physical activity, above and beyond structural characteristics of the built environment. Associations between some structural characteristics of the built environment and physical activity were conditional upon street condition, physical deterioration, and the proportion of parks and playgrounds in good condition. We found modest support for the hypothesis that associations between structural characteristics and physical activity are modified by aspects of the social environment. Results presented here point to the value of and need for understanding and addressing the complexity of factors that contribute to the relationships between the built and social environments and physical activity, and in turn, obesity and co-morbidities. Bringing together urban planners, public health practitioners and policy makers to understand and address aspects of urban environment associated with health outcomes is critical to promoting health and health equity.

Research on a Method of Geographical Information Service Load Balancing

NASA Astrophysics Data System (ADS)

Li, Heyuan; Li, Yongxing; Xue, Zhiyong; Feng, Tao

2018-05-01

With the development of geographical information service technologies, how to achieve the intelligent scheduling and high concurrent access of geographical information service resources based on load balancing is a focal point of current study. This paper presents an algorithm of dynamic load balancing. In the algorithm, types of geographical information service are matched with the corresponding server group, then the RED algorithm is combined with the method of double threshold effectively to judge the load state of serve node, finally the service is scheduled based on weighted probabilistic in a certain period. At the last, an experiment system is built based on cluster server, which proves the effectiveness of the method presented in this paper.

Air pollution abatement performances of green infrastructure in open road and built-up street canyon environments - A review

NASA Astrophysics Data System (ADS)

Abhijith, K. V.; Kumar, Prashant; Gallagher, John; McNabola, Aonghus; Baldauf, Richard; Pilla, Francesco; Broderick, Brian; Di Sabatino, Silvana; Pulvirenti, Beatrice

2017-08-01

Intensifying the proportion of urban green infrastructure has been considered as one of the remedies for air pollution levels in cities, yet the impact of numerous vegetation types deployed in different built environments has to be fully synthesised and quantified. This review examined published literature on neighbourhood air quality modifications by green interventions. Studies were evaluated that discussed personal exposure to local sources of air pollution under the presence of vegetation in open road and built-up street canyon environments. Further, we critically evaluated the available literature to provide a better understanding of the interactions between vegetation and surrounding built-up environments and ascertain means of reducing local air pollution exposure using green infrastructure. The net effects of vegetation in each built-up environment are also summarised and possible recommendations for the future design of green infrastructure are proposed. In a street canyon environment, high-level vegetation canopies (trees) led to a deterioration in air quality, while low-level green infrastructure (hedges) improved air quality conditions. For open road conditions, wide, low porosity and tall vegetation leads to downwind pollutant reductions while gaps and high porosity vegetation could lead to no improvement or even deteriorated air quality. The review considers that generic recommendations can be provided for vegetation barriers in open road conditions. Green walls and roofs on building envelopes can also be used as effective air pollution abatement measures. The critical evaluation of the fundamental concepts and the amalgamation of key technical features of past studies by this review could assist urban planners to design and implement green infrastructures in the built environment.

Urban built environments and trajectories of mobility disability: findings from a national sample of community-dwelling American adults (1986-2001).

PubMed

Clarke, Philippa; Ailshire, Jennifer A; Lantz, Paula

2009-09-01

As people age, they become more dependent on their local communities, especially when they are no longer able to drive. Uneven or discontinuous sidewalks, heavy traffic, and inaccessible public transportation, are just some of the built environment characteristics that can create barriers for outdoor mobility in later adulthood. A small body of literature has been investigating the role of the built environment on disability, but has been limited to cross-sectional analyses. The purpose of this paper is to further advance this area of research by examining the role of the built environment on long-term trajectories of mobility disability in a national sample of American adults (age 45+) followed over a 15-year period. Using multilevel logistic growth curve models with nationally representative data from the Americans' Changing Lives Study (1986-2001), we find that trajectories of mobility disability are steeper in older age groups. Women and those with lower education had a higher odds of mobility disability over time. The presence of just one chronic health condition doubled the odds of mobility disability at each of the four study waves. Among older adults (age 75+), living in neighborhoods characterized by more motorized travel was associated with an odds ratio for mobility disability that was 1.5 times higher in any given year than for older adults living in environments that were more pedestrian friendly. These results suggest that the built environment can exacerbate mobility difficulties for older adults. When considering ways to minimize disability as the population ages, simple changes in the built environment may be easier to implement than efforts to change risk factors at the individual level.

Taxonomic annotation of public fungal ITS sequences from the built environment – a report from an April 10–11, 2017 workshop (Aberdeen, UK)

PubMed Central

Nilsson, R. Henrik; Taylor, Andy F. S.; Adams, Rachel I.; Baschien, Christiane; Johan Bengtsson-Palme; Cangren, Patrik; Coleine, Claudia; Heide-Marie Daniel; Glassman, Sydney I.; Hirooka, Yuuri; Irinyi, Laszlo; Reda Iršėnaitė; Pedro M. Martin-Sanchez; Meyer, Wieland; Seung-Yoon Oh; Jose Paulo Sampaio; Seifert, Keith A.; Sklenář, Frantisek; Dirk Stubbe; Suh, Sung-Oui; Summerbell, Richard; Svantesson, Sten; Martin Unterseher; Cobus M. Visagie; Weiss, Michael; Woudenberg, Joyce HC; Christian Wurzbacher; den Wyngaert, Silke Van; Yilmaz, Neriman; Andrey Yurkov; Kõljalg, Urmas; Abarenkov, Kessy

2018-01-01

Abstract Recent DNA-based studies have shown that the built environment is surprisingly rich in fungi. These indoor fungi – whether transient visitors or more persistent residents – may hold clues to the rising levels of human allergies and other medical and building-related health problems observed globally. The taxonomic identity of these fungi is crucial in such pursuits. Molecular identification of the built mycobiome is no trivial undertaking, however, given the large number of unidentified, misidentified, and technically compromised fungal sequences in public sequence databases. In addition, the sequence metadata required to make informed taxonomic decisions – such as country and host/substrate of collection – are often lacking even from reference and ex-type sequences. Here we report on a taxonomic annotation workshop (April 10–11, 2017) organized at the James Hutton Institute/University of Aberdeen (UK) to facilitate reproducible studies of the built mycobiome. The 32 participants went through public fungal ITS barcode sequences related to the built mycobiome for taxonomic and nomenclatural correctness, technical quality, and metadata availability. A total of 19,508 changes – including 4,783 name changes, 14,121 metadata annotations, and the removal of 99 technically compromised sequences – were implemented in the UNITE database for molecular identification of fungi (https://unite.ut.ee/) and shared with a range of other databases and downstream resources. Among the genera that saw the largest number of changes were Penicillium, Talaromyces, Cladosporium, Acremonium, and Alternaria, all of them of significant importance in both culture-based and culture-independent surveys of the built environment. PMID:29559822

Residential greenness and birth outcomes: evaluating the influence of spatially correlated built-environment factors.

PubMed

Hystad, Perry; Davies, Hugh W; Frank, Lawrence; Van Loon, Josh; Gehring, Ulrike; Tamburic, Lillian; Brauer, Michael

2014-10-01

Half the world's population lives in urban areas. It is therefore important to identify characteristics of the built environment that are beneficial to human health. Urban greenness has been associated with improvements in a diverse range of health conditions, including birth outcomes; however, few studies have attempted to distinguish potential effects of greenness from those of other spatially correlated exposures related to the built environment. We aimed to investigate associations between residential greenness and birth outcomes and evaluate the influence of spatially correlated built environment factors on these associations. We examined associations between residential greenness [measured using satellite-derived Normalized Difference Vegetation Index (NDVI) within 100 m of study participants' homes] and birth outcomes in a cohort of 64,705 singleton births (from 1999-2002) in Vancouver, British Columbia, Canada. We also evaluated associations after adjusting for spatially correlated built environmental factors that may influence birth outcomes, including exposure to air pollution and noise, neighborhood walkability, and distance to the nearest park. An interquartile increase in greenness (0.1 in residential NDVI) was associated with higher term birth weight (20.6 g; 95% CI: 16.5, 24.7) and decreases in the likelihood of small for gestational age, very preterm (< 30 weeks), and moderately preterm (30-36 weeks) birth. Associations were robust to adjustment for air pollution and noise exposures, neighborhood walkability, and park proximity. Increased residential greenness was associated with beneficial birth outcomes in this population-based cohort. These associations did not change after adjusting for other spatially correlated built environment factors, suggesting that alternative pathways (e.g., psychosocial and psychological mechanisms) may underlie associations between residential greenness and birth outcomes.

Association of blood lead levels in children 0-72 months with living in Mid-Appalachia: a semi-ecologic study.

PubMed

Wiener, R Constance; Jurevic, Richard J

2016-01-01

Lead exposure in children remains a significant public health issue, although many advances have been made. The Mid-Appalachia area (Kentucky, New York, Ohio, Pennsylvania, and West Virginia) is 89-91% rural with a population density of 16-21 people/km2 (41-54 people/mi2). Mid-Appalachia has significant health disparities including concerns for the consequences of greater lead exposure to children due to mining and industrial footprints, and existing older housing. The purpose of this study is to compare the reported blood lead levels of screened children, aged 0-72 months in Mid-Appalachia, to the children in the USA in general. Data from the Centers for Disease Control and Prevention and from the US Census Bureau were analyzed in a semi-ecological study. The blood lead level of 5 μg/dL was compared between children in Mid-Appalachia and the US housing units built before 1950; US housing units built before 1940 were also compared. The number of children with blood lead levels of 5 μg/dL was significantly greater in Mid-Appalachia than nationally (7.75% vs 5.79%, respectively; p<0.0001). The number of homes built before 1950 (p<0.0001) and built before 1940 (p<0.0001) was significantly greater in Mid-Appalachia than nationally. Blood lead levels in children are higher in Mid-Appalachia than nationally and there is an ecological relationship with the number of homes built before 1950 and before 1940.

DBD tranformerless power supplies: impact of the parasitic capacitances on the power transfer.

NASA Astrophysics Data System (ADS)

Diop, M. A.; Belinger, A.; Piquet, H.

2017-04-01

A new transformerless power supply for DBD application is presented here. The power supply is built with 10kV SiC MOSFET. This high voltage switches allow holding the high voltage required by the DBD. An analytical study of the converter’s operation is presented to deduce the power transmitted to the DBD. A comparison between the experimental and theoretical electrical waveforms is shown. The experimental waveforms are particularly affected by all the parasitic capacitances. When all the switches are in OFF state, oscillations cause over-voltages across the switches. An analysis of the effect of each capacitance is presented and demonstrates that the parasitic capacitances of the switches and of the inductance play a key role in the actual power transfer.

Current and future risks of asbestos exposure in the Australian community

PubMed Central

2016-01-01

Background Australia mined asbestos for more than 100 years and manufactured and imported asbestos products. There is a legacy of in situ asbestos throughout the built environment. Methods The aim of this study was to identify the possible sources of current and future asbestos exposure from the built environment. Telephone interviews with environmental health officers, asbestos removalists, and asbestos assessors in Australia sought information about common asbestos scenarios encountered. Results There is a considerable amount of asbestos remaining in situ in the Australian built environment. Potential current and future sources of asbestos exposure to the public are from asbestos-containing roofs and fences, unsafe asbestos removal practices, do-it-yourself home renovations and illegal dumping. Conclusion This research has highlighted a need for consistent approaches in the regulation and enforcement of safe practices for the management and removal of asbestos to ensure that in situ asbestos in the built environment is managed appropriately. PMID:27611196

Current and future risks of asbestos exposure in the Australian community.

PubMed

Gray, Corie; Carey, Renee N; Reid, Alison

2016-10-01

Australia mined asbestos for more than 100 years and manufactured and imported asbestos products. There is a legacy of in situ asbestos throughout the built environment. The aim of this study was to identify the possible sources of current and future asbestos exposure from the built environment. Telephone interviews with environmental health officers, asbestos removalists, and asbestos assessors in Australia sought information about common asbestos scenarios encountered. There is a considerable amount of asbestos remaining in situ in the Australian built environment. Potential current and future sources of asbestos exposure to the public are from asbestos-containing roofs and fences, unsafe asbestos removal practices, do-it-yourself home renovations and illegal dumping. This research has highlighted a need for consistent approaches in the regulation and enforcement of safe practices for the management and removal of asbestos to ensure that in situ asbestos in the built environment is managed appropriately.

Using Geographic Information Systems (GIS) to assess the role of the built environment in influencing obesity: a glossary.

PubMed

Thornton, Lukar E; Pearce, Jamie R; Kavanagh, Anne M

2011-07-01

Features of the built environment are increasingly being recognised as potentially important determinants of obesity. This has come about, in part, because of advances in methodological tools such as Geographic Information Systems (GIS). GIS has made the procurement of data related to the built environment easier and given researchers the flexibility to create a new generation of environmental exposure measures such as the travel time to the nearest supermarket or calculations of the amount of neighbourhood greenspace. Given the rapid advances in the availability of GIS data and the relative ease of use of GIS software, a glossary on the use of GIS to assess the built environment is timely. As a case study, we draw on aspects the food and physical activity environments as they might apply to obesity, to define key GIS terms related to data collection, concepts, and the measurement of environmental features.

The influence of the built environment on adverse birth outcomes.

PubMed

Woods, N; Gilliland, J; Seabrook, J A

2017-01-01

Adverse birth outcomes are associated with neonatal morbidity and mortality, and higher risk for coronary heart disease, non-insulin-dependent diabetes and hypertension in adulthood. Although there has been considerable research investigating the association between maternal and environmental factors on adverse birth outcomes, one risk factor, not fully understood, is the influence of the built environment. A search of MEDLINE, Scopus, and Cochrane was conducted to find articles assessing the influence of the built environment on preterm birth (PTB), low birth weight (LBW), and small-for-gestational-age (SGA). In total, 41 studies met our inclusion criteria, and were organized into nine categories: Roadways, Greenness, Power Plants, Gas Stations/Wells, Waste Management, Power Lines, Neighborhood Conditions, Food Environment, and Industry. The most common built environmental variable was roads/traffic, encompassing 17/41 (41%) of the articles reviewed, of which 12/17 (71%) found a significant small to moderate association between high traffic exposure and adverse birth outcomes.

Long-term maintenance needs planning.

DOT National Transportation Integrated Search

2005-09-01

This research contributes to Kentucky's knowledge base of long-term maintenance needs in two parts. Part I presents an estimate of the average revenue needed to maintain four categories of highway in the first fifteen years after each is built or res...

As-built design specification for CAMS Development Dot Data System (CDDDS)

NASA Technical Reports Server (NTRS)

Wehmanen, O. A.

1979-01-01

The CAMS development dot data system is described. Listings and flow charts of the eight programs used to maintain the data base and the 15 subroutines used in FORTRAN programs to process the data are presented.

Epoxy-coated reinforcement : a historical performance review.

DOT National Transportation Integrated Search

1996-01-01

This report is a historical performance review of epoxy-coated reinforcement. The information in this report is presented in chronological order starting from the early 1970's, when the first bridge with epoxy-coated reinforcement was built, and endi...

School Safety Down to Earth: California's Earthquake-Resistant Schools.

ERIC Educational Resources Information Center

Progressive Architecture, 1979

1979-01-01

Schools in California being built to resist damage by earthquakes are part of a program to meet building standards established in 1933. The three new schools presented reflect the strengths and weaknesses of the program. (Author/MLF)

Built-up Land Expansion in Urban China

NASA Astrophysics Data System (ADS)

Chen, Yi; Chen, Zhigang; Huang, Xianjin

2017-04-01

Since the implementation of the reform and opening-up, rapid expansion of built-up land has caused a rapid reduction of arable land. The Ministry of Land and Resources of the People' s Republic of China has strengthened the management of built-up land through the basic arable land protection and the quota allocation of built-up land to control the urban sprawl. In addition, the general land use planning and the annual land use plan have been used to further ensure the effectiveness of land use management and control. However, the trend of built-up land expansion has not been effectively restrained. The built-up land expansion increased from 31.92 × 106 hm2 in 2005 to 38.89 × 106 hm2 in 2012. The rapid expansion of built-up land has been the major feature of land use changes in China and has led to built-up land vacancy and inefficient land use. This paper used a Data Envelopment Analysis (DEA) model to analyze the changes in built-up land efficiency in 336 cities in China from 2005 to 2012 during the implementation of National General Land Use Plan (2006-2020) (NGLUP). The results showed that the built-up land input-output efficiency of most cities declined, and more than half of the cities had excessive inputs of built-up land. Even in the most developed region of China, the built-up land efficiency was relatively low. The paper argues that the NGLUP failed to control the expansion of built-up land and to promote intensive land use. The allocation of built-up land designated by the Plan was not reasonable, and economic development has greatly relied on land inputs, which need to be improved. The paper finally suggests that the built-up land indices should be appropriately directed toward economically underdeveloped regions in central and western China, and the establishment of a withdrawal mechanism for inefficient land would better promote the efficient allocation of built-up land.

A Simple Rate Law Experiment Using a Custom-Built Isothermal Heat Conduction Calorimeter

ERIC Educational Resources Information Center

Wadso, Lars; Li, Xi.

2008-01-01

Most processes (whether physical, chemical, or biological) produce or consume heat: measuring thermal power (the heat production rate) is therefore a typical method of studying processes. Here we describe the design of a simple isothermal heat conduction calorimeter built for use in teaching; we also provide an example of its use in simultaneously…

Lost in the Labyrinthine Library: A Multi-Method Case Study Investigating Public Library User Wayfinding Behavior

ERIC Educational Resources Information Center

Mandel, Lauren Heather

2012-01-01

Wayfinding is the method by which humans orient and navigate in space, and particularly in built environments such as cities and complex buildings, including public libraries. In order to wayfind successfully in the built environment, humans need information provided by wayfinding systems and tools, for instance architectural cues, signs, and…

Experimental studies of two-stage centrifugal dust concentrator

NASA Astrophysics Data System (ADS)

Vechkanova, M. V.; Fadin, Yu M.; Ovsyannikov, Yu G.

2018-03-01

The article presents data of experimental results of two-stage centrifugal dust concentrator, describes its design, and shows the development of a method of engineering calculation and laboratory investigations. For the experiments, the authors used quartz, ceramic dust and slag. Experimental dispersion analysis of dust particles was obtained by sedimentation method. To build a mathematical model of the process, dust collection was built using central composite rotatable design of the four factorial experiment. A sequence of experiments was conducted in accordance with the table of random numbers. Conclusion were made.

First steps towards small arrays of Mo/Au microcalorimeters

NASA Astrophysics Data System (ADS)

Olsen, J.; Kirk, E. C.; Thomsen, K.; van den Brandt, B.; Lerch, Ph; Scandella, L.; Zehnder, A.; Mango, S.; Ott, H. R.; Huber, M.; Hilton, G. C.; Martinis, J. M.

2000-04-01

We are developing small arrays of microcalorimeters based on transition edge sensors made with Mo/Au bilayers deposited on silicon nitride membranes and Au absorbers. The superconducting transition of the bilayers is adjusted to be around 130 mK with a transition width better than a millikelvin by use of the proximity effect between the Au and Mo films. We built a dilution refrigerator and wired it for 2 channel operation in order to study thermal coupling issues between thermometers within the array. The device fabrication procedure as well as preliminary results are presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Voynikova, D. S., E-mail: desi-sl2000@yahoo.com; Gocheva-Ilieva, S. G., E-mail: snegocheva@yahoo.com; Ivanov, A. V., E-mail: aivanov-99@yahoo.com

Numerous time series methods are used in environmental sciences allowing the detailed investigation of air pollution processes. The goal of this study is to present the empirical analysis of various aspects of stochastic modeling and in particular the ARIMA/SARIMA methods. The subject of investigation is air pollution in the town of Kardzhali, Bulgaria with 2 problematic pollutants – sulfur dioxide (SO2) and particulate matter (PM10). Various SARIMA Transfer Function models are built taking into account meteorological factors, data transformations and the use of different horizons selected to predict future levels of concentrations of the pollutants.

From Tabletop RPG to Interactive Storytelling: Definition of a Story Manager for Videogames

NASA Astrophysics Data System (ADS)

Delmas, Guylain; Champagnat, Ronan; Augeraud, Michel

Adding narrative in computer game is complicated because it may restrict player interactivity. Our aim is to design a controller that dynamically built a plot, through the game execution, centred on player's actions. Tabletop Role-playing games manage to deal with this goal. This paper presents a study of role-playing games, their organization, and the models commonly used for narrative generation. It then deduces a proposition of components and data structures for interactive storytelling in videogames. A prototype of a social game has been developed as example.

The Relationship of Built Environment to Perceived Social Support and Psychological Distress in Hispanic Elders: The Role of “Eyes on the Street”

PubMed Central

Mason, Craig A.; Lombard, Joanna L.; Martinez, Frank; Plater-Zyberk, Elizabeth; Spokane, Arnold R.; Newman, Frederick L.; Pantin, Hilda; Szapocznik, José

2009-01-01

Background Research on contextual and neighborhood effects increasingly includes the built (physical) environment's influences on health and social well-being. A population-based study examined whether architectural features of the built environment theorized to promote observations and social interactions (e.g., porches, windows) predict Hispanic elders’ psychological distress. Methods Coding of built environment features of all 3,857 lots across 403 blocks in East Little Havana, Florida, and enumeration of elders in 16,000 households was followed by assessments of perceived social support and psychological distress in a representative sample of 273 low socioeconomic status (SES) Hispanic elders. Structural-equation modeling was used to assess relationships between block-level built environment features, elders’ perceived social support, and psychological distress. Results Architectural features of the front entrance such as porches that promote visibility from a building's exterior were positively associated with perceived social support. In contrast, architectural features such as window areas that promote visibility from a building's interior were negatively associated with perceived social support. Perceived social support in turn was associated with reduced psychological distress after controlling for demographics. Additionally, perceived social support mediated the relationship of built environment variables to psychological distress. Conclusions Architectural features that facilitate direct, in-person interactions may be beneficial for Hispanic elders’ mental health. PMID:19196696

Large N Limits in Tensor Models: Towards More Universality Classes of Colored Triangulations in Dimension d≥2

NASA Astrophysics Data System (ADS)

Bonzom, Valentin

2016-07-01

We review an approach which aims at studying discrete (pseudo-)manifolds in dimension d≥ 2 and called random tensor models. More specifically, we insist on generalizing the two-dimensional notion of p-angulations to higher dimensions. To do so, we consider families of triangulations built out of simplices with colored faces. Those simplices can be glued to form new building blocks, called bubbles which are pseudo-manifolds with boundaries. Bubbles can in turn be glued together to form triangulations. The main challenge is to classify the triangulations built from a given set of bubbles with respect to their numbers of bubbles and simplices of codimension two. While the colored triangulations which maximize the number of simplices of codimension two at fixed number of simplices are series-parallel objects called melonic triangulations, this is not always true anymore when restricting attention to colored triangulations built from specific bubbles. This opens up the possibility of new universality classes of colored triangulations. We present three existing strategies to find those universality classes. The first two strategies consist in building new bubbles from old ones for which the problem can be solved. The third strategy is a bijection between those colored triangulations and stuffed, edge-colored maps, which are some sort of hypermaps whose hyperedges are replaced with edge-colored maps. We then show that the present approach can lead to enumeration results and identification of universality classes, by working out the example of quartic tensor models. They feature a tree-like phase, a planar phase similar to two-dimensional quantum gravity and a phase transition between them which is interpreted as a proliferation of baby universes. While this work is written in the context of random tensors, it is almost exclusively of combinatorial nature and we hope it is accessible to interested readers who are not familiar with random matrices, tensors and quantum field theory.

Automated Reporting of DXA Studies Using a Custom-Built Computer Program.

PubMed

England, Joseph R; Colletti, Patrick M

2018-06-01

Dual-energy x-ray absorptiometry (DXA) scans are a critical population health tool and relatively simple to interpret but can be time consuming to report, often requiring manual transfer of bone mineral density and associated statistics into commercially available dictation systems. We describe here a custom-built computer program for automated reporting of DXA scans using Pydicom, an open-source package built in the Python computer language, and regular expressions to mine DICOM tags for patient information and bone mineral density statistics. This program, easy to emulate by any novice computer programmer, has doubled our efficiency at reporting DXA scans and has eliminated dictation errors.

Area Handbook Series: Egypt: A Country Study

DTIC Science & Technology

1991-01-01

iI~torical Settinlg Sphinx and pyramids at Giza (Al jizah) THE ROOTS OF EGYPTIAN civilization go back more than 6,000 years to the beginning of...built by Snoferu, the first king of the Fourth Dynasty. His son and successor, Kheops, built the Great Pyramid at Giza (AlJizah); this, with its two... Pyramid and Sphinx at Giza , Fourth Dynasty, ca. 2540 B. C. Courtesy Boris Boguslavsky 19 Egypt: A Country Study In June 640, reinforcements for the Arab

Development of New Photovoltaic Devices Based on Multi Wall Carbon Nanotubes and Nanoparticles

DTIC Science & Technology

2013-03-01

response is registered in all the photon spectral range studied. The new kind of Graetzel-like solar cell device was built without dye and TiO2 , showing...response is registered in all the photon spectral range studied. - The new kind of Graetzel (DSSC, Dye Synthesized Solar Cell ) built without Dye and TiO2 ...an IPCE up to 20%. 15. SUBJECT TERMS EOARD, organic solar cells , photovoltaics, carbon nanotubes 16. SECURITY CLASSIFICATION

Apollo Rendezvous Docking Simulator

NASA Image and Video Library

1964-11-02

Originally the Rendezvous was used by the astronauts preparing for Gemini missions. The Rendezvous Docking Simulator was then modified and used to develop docking techniques for the Apollo program. The pilot is shown maneuvering the LEM into position for docking with a full-scale Apollo Command Module. From A.W. Vogeley, Piloted Space-Flight Simulation at Langley Research Center, Paper presented at the American Society of Mechanical Engineers, 1966 Winter Meeting, New York, NY, November 27 - December 1, 1966. The Rendezvous Docking Simulator and also the Lunar Landing Research Facility are both rather large moving-base simulators. It should be noted, however, that neither was built primarily because of its motion characteristics. The main reason they were built was to provide a realistic visual scene. A secondary reason was that they would provide correct angular motion cues (important in control of vehicle short-period motions) even though the linear acceleration cues would be incorrect. Apollo Rendezvous Docking Simulator: Langley s Rendezvous Docking Simulator was developed by NASA scientists to study the complex task of docking the Lunar Excursion Module with the Command Module in Lunar orbit.

Noise and spectroscopic performance of DEPMOSFET matrix devices for XEUS

NASA Astrophysics Data System (ADS)

Treis, J.; Fischer, P.; Hälker, O.; Herrmann, S.; Kohrs, R.; Krüger, H.; Lechner, P.; Lutz, G.; Peric, I.; Porro, M.; Richter, R. H.; Strüder, L.; Trimpl, M.; Wermes, N.; Wölfel, S.

2005-08-01

DEPMOSFET based Active Pixel Sensor (APS) matrix devices, originally developed to cope with the challenging requirements of the XEUS Wide Field Imager, have proven to be a promising new imager concept for a variety of future X-ray imaging and spectroscopy missions like Simbol-X. The devices combine excellent energy resolution, high speed readout and low power consumption with the attractive feature of random accessibility of pixels. A production of sensor prototypes with 64 x 64 pixels with a size of 75 μm x 75 μm each has recently been finished at the MPI semiconductor laboratory in Munich. The devices are built for row-wise readout and require dedicated control and signal processing electronics of the CAMEX type, which is integrated together with the sensor onto a readout hybrid. A number of hybrids incorporating the most promising sensor design variants has been built, and their performance has been studied in detail. A spectroscopic resolution of 131 eV has been measured, the readout noise is as low as 3.5 e- ENC. Here, the dependence of readout noise and spectroscopic resolution on the device temperature is presented.

Dynamic and Fatigue Analysis of an 18{sup th} Century Steel Arch Bridge

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boumechra, Nadir; Hamdaoui, Karim

2008-07-08

Within the 'Oran-Tlemcen' railway line realization project (159 km), several bridges were built by the Railroads Algerian West Company. 7 km from the east of Tlemcen city, this railway line must cross a very broken mountainous collar, that's why the French engineer 'Gustave Eiffel' was solicited to construct a 68 m length bridge. In 1890, an arch steel truss bridge was realized. The bridge presents 300 m of apron curvature radius and, currently, is considered as one of the most important monuments of the Algerian historical heritage. Considering the age of the bridge and the evolution of the railway loadsmore » in time, it was essential to check the good behavior of the studied structure. For that, analyses to verify the physical and mechanical properties of the growth iron members are made. A finite element model of the bridge was built and numerical simulations were drawn. The structural vibration conducted analysis permit to understand the behavior of this particular structure, then to evaluate (in detail) the rate of the structure fatigue.« less

Rover Track in Sand Sheet Near Martian Sand Dune

NASA Image and Video Library

2015-12-10

The rippled surface of the first Martian sand dune ever studied up close fills this view of "High Dune" from the Mast Camera (Mastcam) on NASA's Curiosity rover. This site is part of the "Bagnold Dunes" field along the northwestern flank of Mount Sharp. The dunes are active, migrating up to about one yard or meter per year. The component images of this mosaic view were taken on Nov. 27, 2015, during the 1,176th Martian day, or sol, of Curiosity's work on Mars. The scene is presented with a color adjustment that approximates white balancing, to resemble how the sand would appear under daytime lighting conditions on Earth. The annotated version includes superimposed scale bars of 30 centimeters (1 foot) in the foreground and 100 centimeters (3.3 feet) in the middle distance. Malin Space Science Systems, San Diego, built and operates Curiosity's Mastcam. NASA's Jet Propulsion Laboratory, a division of the California Institute of Technology, Pasadena, built the rover and manages the project for NASA's Science Mission Directorate, Washington. http://photojournal.jpl.nasa.gov/catalog/PIA20169

The universal serial bus endoscope: design and initial clinical experience.

PubMed

Hernandez-Zendejas, Gregorio; Dobke, Marek K; Guerrerosantos, Jose

2004-01-01

Endoscopic forehead lift is a well-established procedure in aesthetic plastic surgery. Many agree that currently available video-endoscopic equipment is bulky, multipieced and sometimes cumbersome in the operating theater. A novel system, the Universal Serial Bus Endoscope (USBE) was designed to simplify and reduce the number of necessary equipment pieces in the endoscopic setup. The USBE is attached by a single cable to a Universal Serial Bus (USB) port of a laptop computer. A built-in miniaturized cold light source provides illumination. A built-in digital camera chip enables procedure recording. The real-time images and movies obtained with USBE are displayed on the computer's screen and recorded on the laptop's hard disk drive. In this study, 25 patients underwent endoscopic browlift using the USBE system to test its clinical usefulness, all with good results and without complications or need for revision. The USBE was found to be reliable and easier to use than current video-endoscope equipment. The operative time needed to complete the procedure by the authors was reduced approximately 50%. The design and main technical characteristics of the USBE are presented.

Charge collection properties in an irradiated pixel sensor built in a thick-film HV-SOI process

NASA Astrophysics Data System (ADS)

Hiti, B.; Cindro, V.; Gorišek, A.; Hemperek, T.; Kishishita, T.; Kramberger, G.; Krüger, H.; Mandić, I.; Mikuž, M.; Wermes, N.; Zavrtanik, M.

2017-10-01

Investigation of HV-CMOS sensors for use as a tracking detector in the ATLAS experiment at the upgraded LHC (HL-LHC) has recently been an active field of research. A potential candidate for a pixel detector built in Silicon-On-Insulator (SOI) technology has already been characterized in terms of radiation hardness to TID (Total Ionizing Dose) and charge collection after a moderate neutron irradiation. In this article we present results of an extensive irradiation hardness study with neutrons up to a fluence of 1× 1016 neq/cm2. Charge collection in a passive pixelated structure was measured by Edge Transient Current Technique (E-TCT). The evolution of the effective space charge concentration was found to be compliant with the acceptor removal model, with the minimum of the space charge concentration being reached after 5× 1014 neq/cm2. An investigation of the in-pixel uniformity of the detector response revealed parasitic charge collection by the epitaxial silicon layer characteristic for the SOI design. The results were backed by a numerical simulation of charge collection in an equivalent detector layout.

An Evaluation of Population Density Mapping and Built up Area Estimates in Sri Lanka Using Multiple Methodologies

NASA Astrophysics Data System (ADS)

Engstrom, R.; Soundararajan, V.; Newhouse, D.

2017-12-01

In this study we examine how well multiple population density and built up estimates that utilize satellite data compare in Sri Lanka. The population relationship is examined at the Gram Niladhari (GN) level, the lowest administrative unit in Sri Lanka from the 2011 census. For this study we have two spatial domains, the whole country and a 3,500km2 sub-sample, for which we have complete high spatial resolution imagery coverage. For both the entire country and the sub-sample we examine how consistent are the existing publicly available measures of population constructed from satellite imagery at predicting population density? For just the sub-sample we examine how well do a suite of values derived from high spatial resolution satellite imagery predict population density and how does our built up area estimate compare to other publicly available estimates. Population measures were obtained from the Sri Lankan census, and were downloaded from Facebook, WorldPoP, GPW, and Landscan. Percentage built-up area at the GN level was calculated from three sources: Facebook, Global Urban Footprint (GUF), and the Global Human Settlement Layer (GHSL). For the sub-sample we have derived a variety of indicators from the high spatial resolution imagery. Using deep learning convolutional neural networks, an object oriented, and a non-overlapping block, spatial feature approach. Variables calculated include: cars, shadows (a proxy for building height), built up area, and buildings, roof types, roads, type of agriculture, NDVI, Pantex, and Histogram of Oriented Gradients (HOG) and others. Results indicate that population estimates are accurate at the higher, DS Division level but not necessarily at the GN level. Estimates from Facebook correlated well with census population (GN correlation of 0.91) but measures from GPW and WorldPop are more weakly correlated (0.64 and 0.34). Estimates of built-up area appear to be reliable. In the 32 DSD-subsample, Facebook's built- up area measure is highly correlated with our built-up measure (correlation of 0.9). Preliminary regression results based on variables selected from Lasso-regressions indicate that satellite indicators have exceptionally strong predictive power in predicting GN level population level and density with an out of sample r-squared of 0.75 and 0.72 respectively.

Identifying built environmental patterns using cluster analysis and GIS: Relationships with walking, cycling and body mass index in French adults

PubMed Central

2012-01-01

Background Socio-ecological models suggest that both individual and neighborhood characteristics contribute to facilitating health-enhancing behaviors such as physical activity. Few European studies have explored relationships between local built environmental characteristics, recreational walking and cycling and weight status in adults. The aim of this study was to identify built environmental patterns in a French urban context and to assess associations with recreational walking and cycling behaviors as performed by middle-aged adult residents. Methods We used a two-step procedure based on cluster analysis to identify built environmental patterns in the region surrounding Paris, France, using measures derived from Geographic Information Systems databases on green spaces, proximity facilities (destinations) and cycle paths. Individual data were obtained from participants in the SU.VI.MAX cohort; 1,309 participants residing in the Ile-de-France in 2007 were included in this analysis. Associations between built environment patterns, leisure walking/cycling data (h/week) and measured weight status were assessed using multinomial logistic regression with adjustment for individual and neighborhood characteristics. Results Based on accessibility to green spaces, proximity facilities and availability of cycle paths, seven built environmental patterns were identified. The geographic distribution of built environmental patterns in the Ile-de-France showed that a pattern characterized by poor spatial accessibility to green spaces and proximity facilities and an absence of cycle paths was found only in neighborhoods in the outer suburbs, whereas patterns characterized by better spatial accessibility to green spaces, proximity facilities and cycle paths were more evenly distributed across the region. Compared to the reference pattern (poor accessibility to green areas and facilities, absence of cycle paths), subjects residing in neighborhoods characterized by high accessibility to green areas and local facilities and by a high density of cycle paths were more likely to walk/cycle, after adjustment for individual and neighborhood sociodemographic characteristics (OR = 2.5 95%CI 1.4-4.6). Body mass index did not differ across patterns. Conclusions Built environmental patterns were associated with walking and cycling among French adults. These analyses may be useful in determining urban and public health policies aimed at promoting a healthy lifestyle. PMID:22620266

Design and implementation of a physical activity intervention to enhance children's use of the built environment (the CUBE study).

PubMed

Oreskovic, Nicolas M; Goodman, Elizabeth; Park, Elyse R; Robinson, Alyssa I; Winickoff, Jonathan P

2015-01-01

Adequate physical activity promotes physical and mental health and decreases obesity risk. However, most adolescents do not attain recommended physical activity levels and effective interventions are lacking. Physical activity trials rarely incorporate built environment use patterns. This paper describes the design and rationale of the Children's Use of the Built Environment (CUBE) Study, an office-based intervention designed to teach youth how to use their surrounding built environment to increase physical activity. CUBE is a 6-month intervention trial among 60 overweight and obese 10-16 year old adolescents from a community health center in Massachusetts. The study began in the winter of 2013. Patients are sequentially assigned to either the intervention or control group. Baseline physical activity by accelerometry and location by GPS, along with measured height, weight, and blood pressure are collected. Control subjects receive standard of care lifestyle counseling. Intervention subjects receive tailored recommendations on how to increase their physical activity based on their accelerometer and GPS data. Data collections are repeated at end-of-treatment, and again 3 months later. The findings from this study should help guide future efforts to design interventions aimed at increasing adolescent physical activity as well as to inform design professionals and government officials charged with creating outdoor spaces where adolescents spend time. Copyright © 2014 Elsevier Inc. All rights reserved.

Built spaces and features associated with user satisfaction in maternity waiting homes in Malawi.

PubMed

McIntosh, Nathalie; Gruits, Patricia; Oppel, Eva; Shao, Amie

2018-07-01

To assess satisfaction with maternity waiting home built spaces and features in women who are at risk for underutilizing maternity waiting homes (i.e. residential facilities that temporarily house near-term pregnant mothers close to healthcare facilities that provide obstetrical care). Specifically we wanted to answer the questions: (1) Are built spaces and features associated with maternity waiting home user satisfaction? (2) Can built spaces and features designed to improve hygiene, comfort, privacy and function improve maternity waiting home user satisfaction? And (3) Which built spaces and features are most important for maternity waiting home user satisfaction? A cross-sectional study comparing satisfaction with standard and non-standard maternity waiting home designs. Between December 2016 and February 2017 we surveyed expectant mothers at two maternity waiting homes that differed in their design of built spaces and features. We used bivariate analyses to assess if built spaces and features were associated with satisfaction. We compared ratings of built spaces and features between the two maternity waiting homes using chi-squares and t-tests to assess if design features to improve hygiene, comfort, privacy and function were associated with higher satisfaction. We used exploratory robust regression analysis to examine the relationship between built spaces and features and maternity waiting home satisfaction. Two maternity waiting homes in Malawi, one that incorporated non-standardized design features to improve hygiene, comfort, privacy, and function (Kasungu maternity waiting home) and the other that had a standard maternity waiting home design (Dowa maternity waiting home). 322 expectant mothers at risk for underutilizing maternity waiting homes (i.e. first-time mothers and those with no pregnancy risk factors) who had stayed at the Kasungu or Dowa maternity waiting homes. There were significant differences in ratings of built spaces and features between the two differently designed maternity waiting homes, with the non-standard design having higher ratings for: adequacy of toilets, and ratings of heating/cooling, air and water quality, sanitation, toilets/showers and kitchen facilities, building maintenance, sleep area, private storage space, comfort level, outdoor spaces and overall satisfaction (p = <.0001 for all). The final regression model showed that built spaces and features that are most important for maternity waiting home user satisfaction are toilets/showers, guardian spaces, safety, building maintenance, sleep area and private storage space (R 2  = 0.28). The design of maternity waiting home built spaces and features is associated with user satisfaction in women at risk for underutilizing maternity waiting homes, especially related to toilets/showers, guardian spaces, safety, building maintenance, sleep area and private storage space. Improving maternity waiting home built spaces and features may offer a promising area for improving maternity waiting home satisfaction and reducing barriers to maternity waiting home use. Copyright © 2018 Elsevier Ltd. All rights reserved.

Commission of Professors of Adult Education. Proceedings of the 1986 Annual Conference (Hollywood, Florida, October 20-22, 1986).

ERIC Educational Resources Information Center

Lewis, Linda H., Ed.; Niemi, John A., Ed.

These proceedings of a conference built around the theme of the professionalization of adult and continuing education include the full texts of presentations at the conference General Sessions, papers and synopses of conference workshops and panel presentations, reports from the seven task forces of the Commission of Professors of Adult Education;…

Thermoacoustic School Project Work with an Electrically Heated Rijke Tube

ERIC Educational Resources Information Center

Beke, Tamas

2010-01-01

In this article we present a project that includes physical measuring, examination and modelling task. The main objective of this article is to present the theory of thermoacoustic oscillations; for this purpose, a simple Rijke-type thermal device was built. The Rijke tube is essentially a pipe open at both ends with a mean flow and a concentrated…

Design Considerations of a Solid State Thermal Energy Storage

NASA Astrophysics Data System (ADS)

Janbozorgi, Mohammad; Houssainy, Sammy; Thacker, Ariana; Ip, Peggy; Ismail, Walid; Kavehpour, Pirouz

2016-11-01

With the growing governmental restrictions on carbon emission, renewable energies are becoming more prevalent. A reliable use of a renewable source however requires a built-in storage to overcome the inherent intermittent nature of the available energy. Thermal design of a solid state energy storage has been investigated for optimal performance. The impact of flow regime, laminar vs. turbulent, on the design and sizing of the system is also studied. The implications of low thermal conductivity of the storage material are discussed and a design that maximizes the round trip efficiency is presented. This study was supported by Award No. EPC-14-027 Granted by California Energy Commission (CEC).

Infrared thermography applied to the study of heated and solar pavement: from numerical modeling to small scale laboratory experiments

NASA Astrophysics Data System (ADS)

Le Touz, N.; Toullier, T.; Dumoulin, J.

2017-05-01

The present study addresses the thermal behaviour of a modified pavement structure to prevent icing at its surface in adverse winter time conditions or overheating in hot summer conditions. First a multi-physic model based on infinite elements method was built to predict the evolution of the surface temperature. In a second time, laboratory experiments on small specimen were carried out and the surface temperature was monitored by infrared thermography. Results obtained are analyzed and performances of the numerical model for real scale outdoor application are discussed. Finally conclusion and perspectives are proposed.

Using the Abstraction Network in Complement to Description Logics for Quality Assurance in Biomedical Terminologies - A Case Study in SNOMED CT

PubMed Central

Wei, Duo; Bodenreider, Olivier

2015-01-01

Objectives To investigate errors identified in SNOMED CT by human reviewers with help from the Abstraction Network methodology and examine why they had escaped detection by the Description Logic (DL) classifier. Case study; Two examples of errors are presented in detail (one missing IS-A relation and one duplicate concept). After correction, SNOMED CT is reclassified to ensure that no new inconsistency was introduced. Conclusions DL-based auditing techniques built in terminology development environments ensure the logical consistency of the terminology. However, complementary approaches are needed for identifying and addressing other types of errors. PMID:20841848

Using the abstraction network in complement to description logics for quality assurance in biomedical terminologies - a case study in SNOMED CT.

PubMed

Wei, Duo; Bodenreider, Olivier

2010-01-01

To investigate errors identified in SNOMED CT by human reviewers with help from the Abstraction Network methodology and examine why they had escaped detection by the Description Logic (DL) classifier. Case study; Two examples of errors are presented in detail (one missing IS-A relation and one duplicate concept). After correction, SNOMED CT is reclassified to ensure that no new inconsistency was introduced. DL-based auditing techniques built in terminology development environments ensure the logical consistency of the terminology. However, complementary approaches are needed for identifying and addressing other types of errors.

Computational modeling and experimental studies on NO{sub x} reduction under pulverized coal combustion conditions. Seventh quarterly technical progress report, July 1, 1996--September 30, 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kumpaty, S.K.; Subramanian, K.; Nokku, V.P.

1996-12-31

During this quarter (July-August 1996), the experiments for nitric oxide reburning with a combination of methane and ammonia were conducted successfully. This marked the completion of gaseous phase experiments. Preparations are underway for the reburning studies with coal. A coal feeder was designed to suit our reactor facility which is being built by MK Fabrication. The coal feeder should be operational in the coming quarter. Presented here are the experimental results of NO reburning with methane/ammonia. The results are consistent with the computational work submitted in previous reports.

A broad band X-ray imaging spectrophotometer for astrophysical studies

NASA Technical Reports Server (NTRS)

Lum, Kenneth S. K.; Lee, Dong Hwan; Ku, William H.-M.

1988-01-01

A broadband X-ray imaging spectrophotometer (BBXRIS) has been built for astrophysical studies. The BBXRIS is based on a large-imaging gas scintillation proportional counter (LIGSPC), a combination of a gas scintillation proportional counter and a multiwire proportional counter, which achieves 8 percent (FWHM) energy resolution and 1.5-mm (FWHM) spatial resolution at 5.9 keV. The LIGSPC can be integrated with a grazing incidence mirror and a coded aperture mask to provide imaging over a broad range of X-ray energies. The results of tests involving the LIGSPC and a coded aperture mask are presented, and possible applications of the BBXRIS are discussed.

Feasibility study on optimization of a typical solar chimney power plant

NASA Astrophysics Data System (ADS)

Najmi, Mohsen; Nazari, Ali; Mansouri, Hossein; Zahedi, Ghazzanfar

2012-03-01

The solar chimney which has been built in Kerman (Kerman city-Iran) is a small scale electrical power plant. The chimney of this unit has 60 m height and 3 m diameter. The collector of this unit is 40 m × 40 m square. To reach nominal power of this unit of power plant, parameters which are effective in optimization are studied. In this regard, we deliberate and propose suggestions to maximize usage of solar energy and kinetic energy. The calculation of maximum power is one of the objectives of this study, so the paper present economic analysis for Kerman solar chimney. A home code has been written for this modeling, in MATLAB.

Key Ecological Interactions of Reef Building Corals - 11-16-2011

EPA Science Inventory

Coral reefs are very important marine ecosystems because they support tremendous biodiversity and reefs are critical economic resources many coastal nations. Tropical reef structures are largely built by stony corals. This presentation provides background on basic coral biology t...

Recent Experiments at the Gottingen Aerodynamic Institute

NASA Technical Reports Server (NTRS)

Ackeret, J

1925-01-01

This report presents the results of various experiments carried out at the Gottingen Aerodynamic Institute. These include: experiments with Joukowski wing profiles; experiments on an airplane model with a built-in motor and functioning propeller; and the rotating cylinder (Magnus Effect).

Modelling high data rate communication network access protocol

NASA Technical Reports Server (NTRS)

Khanna, S.; Foudriat, E. C.; Paterra, Frank; Maly, Kurt J.; Overstreet, C. Michael

1990-01-01

Modeling of high data rate communication systems is different from the low data rate systems. Three simulations were built during the development phase of Carrier Sensed Multiple Access/Ring Network (CSMA/RN) modeling. The first was a model using SIMCRIPT based upon the determination and processing of each event at each node. The second simulation was developed in C based upon isolating the distinct object that can be identified as the ring, the message, the node, and the set of critical events. The third model further identified the basic network functionality by creating a single object, the node which includes the set of critical events which occur at the node. The ring structure is implicit in the node structure. This model was also built in C. Each model is discussed and their features compared. It should be stated that the language used was mainly selected by the model developer because of his past familiarity. Further the models were not built with the intent to compare either structure or language but because the complexity of the problem and initial results contained obvious errors, so alternative models were built to isolate, determine, and correct programming and modeling errors. The CSMA/RN protocol is discussed in sufficient detail to understand modeling complexities. Each model is described along with its features and problems. The models are compared and concluding observations and remarks are presented.

Rapid Mapping for Built Heritage at Risk Using Low-Cost and Cots Sensors. a Test in the Duomo Vecchio of San Severino Marche

NASA Astrophysics Data System (ADS)

Calantropio, A.; Colucci, E.; Teppati Losè, L.

2017-11-01

In the last years, the researchers in the field of Geomatics have focused their attention in the experimentation and validation of new methodologies and techniques, stressing especially the potential of low-cost and COTS (Commercial Off The Shelf) solutions and sensors. In particular, these tools have been used with purposes of rapid mapping in different contexts (ranging from the construction industry, environmental monitoring, mining activities, etc.). The Built Heritage, due to its intrinsic nature of endangered artefact, can largely benefit from the technological and methodological innovations in this research field. The contribute presented in this paper will highlight these main topics: the rapid mapping of the Built Heritage (in particular the one subjected to different types of risk) using low-cost and COTS solutions. Different sensors and techniques were chosen to be evaluated on a specific test site: the Duomo Vecchio of San Severino Marche (MC - Italy), that was partially affected by the earthquake swarm that hit the area of Central Italy starting from the 24th of August 2016. One of the main aims of this work is to demonstrate how low-cost and COTS sensors can contribute to the documentation of the Built Heritage for its safeguard, for damage assessment in case of disastrous events and operations of restoration and preservation.

From built environment to health inequalities: An explanatory framework based on evidence

PubMed Central

Gelormino, Elena; Melis, Giulia; Marietta, Cristina; Costa, Giuseppe

2015-01-01

Objective: The Health in All Policies strategy aims to engage every policy domain in health promotion. The more socially disadvantaged groups are usually more affected by potential negative impacts of policies if they are not health oriented. The built environment represents an important policy domain and, apart from its housing component, its impact on health inequalities is seldom assessed. Methods: A scoping review of evidence on the built environment and its health equity impact was carried out, searching both urban and medical literature since 2000 analysing socio-economic inequalities in relation to different components of the built environment. Results: The proposed explanatory framework assumes that key features of built environment (identified as density, functional mix and public spaces and services), may influence individual health through their impact on both natural environment and social context, as well as behaviours, and that these effects may be unequally distributed according to the social position of individuals. Conclusion: In general, the expected links proposed by the framework are well documented in the literature; however, evidence of their impact on health inequalities remains uncertain due to confounding factors, heterogeneity in study design, and difficulty to generalize evidence that is still very embedded to local contexts. PMID:26844145

Associations between sociodemographic characteristics and perceptions of the built environment with the frequency, type, and duration of physical activity among trail users.

PubMed

Maslow, Andréa L; Reed, Julian A; Price, Anna E; Hooker, Steven P

2012-01-01

Rail trails are elements of the built environment that support the Task Force on Community Preventive Services' recommendation to create, or enhance access to, places for physical activity (PA). The purpose of this study was to examine the associations between sociodemographic characteristics and perceptions of the built environment with the frequency, type, and duration of PA among users of an urban, paved rail trail segment. Interviewers conducted intercept surveys with 431 rail trail users and analyzed data by using logistic regression to estimate odds ratios between sociodemographic characteristics and perceptions of the built environment on the frequency, type, and duration of PA performed on the trail. Adults who used the trail in the cool months, traveled to the trail by a motorized vehicle, used the trail with others, and had some graduate school education visited the trail less often. Younger adults, men, whites, and those with some graduate school education were more likely to engage in vigorous activities on the trail. Adults who traveled to the trail by a motorized vehicle spent more time engaged in PA on the trail. Our results suggest that the most frequent users of a rail trail for PA are those who use the trail alone and travel to the trail by bicycle or on foot. Trails are an aspect of the built environment that supports active lifestyles, and future studies should evaluate different types of trails among more diverse populations and locations.

Measuring the Built Environment for Physical Activity

PubMed Central

Brownson, Ross C.; Hoehner, Christine M.; Day, Kristen; Forsyth, Ann; Sallis, James F.

2009-01-01

Physical inactivity is one of the most important public health issues in the U.S. and internationally. Increasingly, links are being identified between various elements of the physical—or built—environment and physical activity. To understand the impact of the built environment on physical activity, the development of high-quality measures is essential. Three categories of built environment data are being used: (1) perceived measures obtained by telephone interview or self-administered questionnaires; (2) observational measures obtained using systematic observational methods (audits); and (3) archival data sets that are often layered and analyzed with GIS. This review provides a critical assessment of these three types of built-environment measures relevant to the study of physical activity. Among perceived measures, 19 questionnaires were reviewed, ranging in length from 7 to 68 questions. Twenty audit tools were reviewed that cover community environments (i.e., neighborhoods, cities), parks, and trails. For GIS-derived measures, more than 50 studies were reviewed. A large degree of variability was found in the operationalization of common GIS measures, which include population density, land-use mix, access to recreational facilities, and street pattern. This first comprehensive examination of built-environment measures demonstrates considerable progress over the past decade, showing diverse environmental variables available that use multiple modes of assessment. Most can be considered first-generation measures, so further development is needed. In particular, further research is needed to improve the technical quality of measures, understand the relevance to various population groups, and understand the utility of measures for science and public health. PMID:19285216

Ultra Small Aperture Terminal: System Design and Test Results

NASA Technical Reports Server (NTRS)

Sohn, Philip Y.; Reinhart, Richard C.

1996-01-01

The Ultra Small Aperture Terminal (USAT) has been developed to test and demonstrate remote and broadcast satcom applications via the Advanced Communications Technology Satellite (ACTS). The design of these ground stations emphasize small size, low power consumption, portable and rugged terminals. Each ground station includes several custom design parts such as 35 cm diameter antenna, 1/4 Watt transmitter with built-in upconverter, and 4.0 dB Noise Figure (NF) receiver with built-in downconverter. In addition, state-of-the-art commercial parts such as highly stable ovenized crystal oscillators and dielectric resonator oscillators are used in the ground station design. Presented in this paper are system level design description, performance, and sample applications.

Co-generation and innovative heat storage systems in small-medium CSP plants for distributed energy production

NASA Astrophysics Data System (ADS)

Giaconia, Alberto; Montagnino, Fabio; Paredes, Filippo; Donato, Filippo; Caputo, Giampaolo; Mazzei, Domenico

2017-06-01

CSP technologies can be applied for distributed energy production, on small-medium plants (on the 1 MW scale), to satisfy the needs of local communities, buildings and districts. In this perspective, reliable, low-cost, and flexible small/medium multi-generative CSP plants should be developed. Four pilot plants have been built in four Mediterranean countries (Cyprus, Egypt, Jordan, and Italy) to demonstrate the approach. In this paper, the plant built in Italy is presented, with specific innovations applied in the linear Fresnel collector design and the Thermal Energy Storage (TES) system, based on a single the use of molten salts but specifically tailored for small scale plants.

International comparisons of the associations between objective measures of the built environment and transport-related walking and cycling: IPEN Adult Study.

PubMed

Christiansen, Lars B; Cerin, Ester; Badland, Hannah; Kerr, Jacqueline; Davey, Rachel; Troelsen, Jens; van Dyck, Delfien; Mitáš, Josef; Schofield, Grant; Sugiyama, Takemi; Salvo, Deborah; Sarmiento, Olga L; Reis, Rodrigo; Adams, Marc; Frank, Larry; Sallis, James F

2016-12-01

Mounting evidence documents the importance of urban form for active travel, but international studies could strengthen the evidence. The aim of the study was to document the strength, shape, and generalizability of relations of objectively measured built environment variables with transport-related walking and cycling. This cross-sectional study maximized variation of environments and demographics by including multiple countries and by selecting adult participants living in neighborhoods based on higher and lower classifications of objectively measured walkability and socioeconomic status. Analyses were conducted on 12,181 adults aged 18-66 years, drawn from 14 cities across 10 countries worldwide. Frequency of transport-related walking and cycling over the last seven days was assessed by questionnaire and four objectively measured built environment variables were calculated. Associations of built environment variables with transport-related walking and cycling variables were estimated using generalized additive mixed models, and were tested for curvilinearity and study site moderation. We found positive associations of walking for transport with all the environmental attributes, but also found that the relationships was only linear for land use mix, but not for residential density, intersection density, and the number of parks. Our findings suggest that there may be optimum values in these attributes, beyond which higher densities or number of parks could have minor or even negative impact. Cycling for transport was associated linearly with residential density, intersection density (only for any cycling), and land use mix, but not with the number of parks. Across 14 diverse cities and countries, living in more densely populated areas, having a well-connected street network, more diverse land uses, and having more parks were positively associated with transport-related walking and/or cycling. Except for land-use-mix, all built environment variables had curvilinear relationships with walking, with a plateau in the relationship at higher levels of the scales.

International comparisons of the associations between objective measures of the built environment and transport-related walking and cycling: IPEN Adult Study

PubMed Central

Christiansen, Lars B.; Cerin, Ester; Badland, Hannah; Kerr, Jacqueline; Davey, Rachel; Troelsen, Jens; van Dyck, Delfien; Mitáš, Josef; Schofield, Grant; Sugiyama, Takemi; Salvo, Deborah; Sarmiento, Olga L.; Reis, Rodrigo; Adams, Marc; Frank, Larry; Sallis, James F.

2016-01-01

Introduction Mounting evidence documents the importance of urban form for active travel, but international studies could strengthen the evidence. The aim of the study was to document the strength, shape, and generalizability of relations of objectively measured built environment variables with transport-related walking and cycling. Methods This cross-sectional study maximized variation of environments and demographics by including multiple countries and by selecting adult participants living in neighborhoods based on higher and lower classifications of objectively measured walkability and socioeconomic status. Analyses were conducted on 12,181 adults aged 18–66 years, drawn from 14 cities across 10 countries worldwide. Frequency of transport-related walking and cycling over the last seven days was assessed by questionnaire and four objectively measured built environment variables were calculated. Associations of built environment variables with transport-related walking and cycling variables were estimated using generalized additive mixed models, and were tested for curvilinearity and study site moderation. Results We found positive associations of walking for transport with all the environmental attributes, but also found that the relationships was only linear for land use mix, but not for residential density, intersection density, and the number of parks. Our findings suggest that there may be optimum values in these attributes, beyond which higher densities or number of parks could have minor or even negative impact. Cycling for transport was associated linearly with residential density, intersection density (only for any cycling), and land use mix, but not with the number of parks. Conclusion Across 14 diverse cities and countries, living in more densely populated areas, having a well-connected street network, more diverse land uses, and having more parks were positively associated with transport-related walking and/or cycling. Except for land-use-mix, all built environment variables had curvilinear relationships with walking, with a plateau in the relationship at higher levels of the scales. PMID:28111613

Space hands-on universe telescope and orbiting wide-angle light-collector telescope to be built on the Japanese experiment module exposure facility of the international space station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takahashi, Y.; Ebisuzaki, T.; Pennypacker, C.

1999-01-01

A concept study to build great observatories on, and deploy from, the ISS is presented. Use of the ISS infra-structure including robotic arms and astronauts{close_quote} EVA would permit a construction of very large optical telescopes. We envisage that the second phase of the ISS after its initial construction can landmark a new era for both ISS and Space Sciences. Ultimately, this study would plan a 10-or 20-meter class space telescope. For its first step, we envisioned an immediate extension of the Exposed Facility of ISS for building a {open_quotes}Work-bench{close_quotes} for this purpose. Initial activities can begin with two modest-sized telescopesmore » soon after the ISS construction. These early missions being studied are space Hands-On Universe Telescope (SHOUT) and Orbiting Wide-angle Light-collector (OWL). SHOUT is a 1-m telescope for science education. It will be built and adjusted on the exposure module of the Japanese Experiment Module (JEM) of the International Space Station by using a robotic arm and the EVA of astronauts. We also seek the possibility to release it from ISS after its perfection on orbit, so that it is free from the vibrations and gas contaminations on and around the ISS. SHOUT is an engineering prototype of 10-m Space Telescope (Space SUBARU Telescope). It would be scaled from the Space-SUBARU telescope so that the testing with the SHOUT would warrant the required specifications for the 10-meter Space-SUBARU construction on the ISS. The goal of the test with the SHOUT is to warrant a spatial resolution of 0.01 arc-seconds using the active/adaptive optics. It will test the following three major engineering challenges: (1) active/adaptive optics in space; (2) building of large structures by astronauts; and (3) release of a spacecraft from ISS to a free-flying orbit. The present feasibility study for the next generation great observatories that are to be built on the JEM Exposure Facility (EF) has been already funded by the Japan Space Forum, under the auspices of the National Space Development Agency (NASDA) of Japan. Included in this study are SHOUT, Space SUBARU telescope as well as OWL, Large Area gamma-ray Telescope (LAGT), and Space Submilimeter and Infrared Telescope (S-SIT). {copyright} {ital 1999 American Institute of Physics.}« less

Electrical imaging for localizing historical tunnels at an urban environment

NASA Astrophysics Data System (ADS)

Osella, Ana; Martinelli, Patricia; Grunhut, Vivian; de la Vega, Matías; Bonomo, Néstor; Weissel, Marcelo

2015-08-01

We performed a geophysical study at a historical site in Buenos Aires, Argentina, corresponding to the location of a Jesuit Mission established during the 17th century, remaining there until the 18th century. The site consisted of a church, cloisters, a school, orchards and a procurator’s office; also several tunnels were built, connecting the mission with different public buildings in the town. In the 19th century the Faculty of Sciences of the University of Buenos Aires was built in a sector of the site originally occupied by an orchard, functioning until its demolition in 1973. At present, this area is a cobbled square. With the aim of preserving and restoring the buried structures, work was carried out in this square looking for tunnels and remains of the basement of the old building. Considering the conductive features of the subsoil, mainly formed by clays and silt, the complex characteristics of the buried structures, and the urban localization of the study area with its consequent high level of environmental electromagnetic noise, we performed pre-feasibility studies to determine the usefulness of different geophysical methods. The best results were achieved from the geoelectrical method. Dipole-dipole profiles with electrode spacings of 1.5 and 3 m provided enough lateral and vertical resolution and the required penetration depth. Reliable data were obtained as long as the electrodes were buried at least 15 cm among the cobble stones. Nine 2D electrical resistivity tomographies were obtained by using a robust inversion procedure to reduce the effect of possible data outliers in the resulting models. The effect on these models of different error estimations was also analyzed. Then, we built up a pseudo-3D model by laterally interpolating the 2D inversion results. Finally, by correlating the resulting model with the original plans, the remains of the expected main structures embedded in the site were characterized. In addition, an anomaly was identified that indicates the presence of a tunnel not previously reported.

A low cost, low power, S-band radar for atmospheric turbulence studies

NASA Astrophysics Data System (ADS)

Farrell, Thomas C.

2015-05-01

We present a frequency modulated continuous wave (FMCW) radar capable of measuring atmospheric turbulence profiles within the Earth's surface layer. Due to the low cost and easily automated design, a number of units may be built and deployed to sites of interest around the world. Each unit would be capable of collecting turbulence strength, as a function of altitude, with a range of about 50 meters above the antenna plane. Such data is valuable to developers of directed energy, laser communications, imaging, and other optical systems, where good engineering design is based on an understanding of the details of the turbulence in which those systems will have to operate. The radar is based on the MIT "coffee can" design1,2. It is FCC compliant, operating in the 2.4 GHz instrumentation, science, and medical (ISM) band with less than 1 watt effective isotropic radiated power (EIRP). It is expected to cost less than $1000 per unit and is built from commercial off the shelf parts, along with easily constructed horn antennas. Major modifications to the design in 1,2 are the inclusion of horn antennas for directivity, and a straight forward processing software change that increases integration times to the order of tens of seconds to a minute. Here, a prototype system is described and preliminary data is presented.

Double Wall Framing Technique An Example of High Performance, Sustainable Building Envelope Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kosny, Dr. Jan; Asiz, Andi; Shrestha, Som S

2015-01-01

Double wall technologies utilizing wood framing have been well-known and used in North American buildings for decades. Most of double wall designs use only natural materials such as wood products, gypsum, and cellulose fiber insulation, being one of few building envelope technologies achieving high thermal performance without use of plastic foams or fiberglass. Today, after several material and structural design modifications, these technologies are considered as highly thermally efficient, sustainable option for new constructions and sometimes, for retrofit projects. Following earlier analysis performed for U.S. Department of Energy by Fraunhofer CSE, this paper discusses different ways to build double wallsmore » and to optimize their thermal performance to minimize the space conditioning energy consumption. Description of structural configuration alternatives and thermal performance analysis are presented as well. Laboratory tests to evaluate thermal properties of used insulation and whole wall system thermal performance are also discussed in this paper. Finally, the thermal loads generated in field conditions by double walls are discussed utilizing results from a joined project performed by Zero Energy Building Research Alliance and Oak Ridge National Laboratory (ORNL), which made possible evaluation of the market viability of low-energy homes built in the Tennessee Valley. Experimental data recorded in two of the test houses built during this field study is presented in this work.« less

SEnviro: a sensorized platform proposal using open hardware and open standards.

PubMed

Trilles, Sergio; Luján, Alejandro; Belmonte, Óscar; Montoliu, Raúl; Torres-Sospedra, Joaquín; Huerta, Joaquín

2015-03-06

The need for constant monitoring of environmental conditions has produced an increase in the development of wireless sensor networks (WSN). The drive towards smart cities has produced the need for smart sensors to be able to monitor what is happening in our cities. This, combined with the decrease in hardware component prices and the increase in the popularity of open hardware, has favored the deployment of sensor networks based on open hardware. The new trends in Internet Protocol (IP) communication between sensor nodes allow sensor access via the Internet, turning them into smart objects (Internet of Things and Web of Things). Currently, WSNs provide data in different formats. There is a lack of communication protocol standardization, which turns into interoperability issues when connecting different sensor networks or even when connecting different sensor nodes within the same network. This work presents a sensorized platform proposal that adheres to the principles of the Internet of Things and theWeb of Things. Wireless sensor nodes were built using open hardware solutions, and communications rely on the HTTP/IP Internet protocols. The Open Geospatial Consortium (OGC) SensorThings API candidate standard was used as a neutral format to avoid interoperability issues. An environmental WSN developed following the proposed architecture was built as a proof of concept. Details on how to build each node and a study regarding energy concerns are presented.

SEnviro: A Sensorized Platform Proposal Using Open Hardware and Open Standards

PubMed Central

Trilles, Sergio; Luján, Alejandro; Belmonte, Óscar; Montoliu, Raúl; Torres-Sospedra, Joaquín; Huerta, Joaquín

2015-01-01

The need for constant monitoring of environmental conditions has produced an increase in the development of wireless sensor networks (WSN). The drive towards smart cities has produced the need for smart sensors to be able to monitor what is happening in our cities. This, combined with the decrease in hardware component prices and the increase in the popularity of open hardware, has favored the deployment of sensor networks based on open hardware. The new trends in Internet Protocol (IP) communication between sensor nodes allow sensor access via the Internet, turning them into smart objects (Internet of Things and Web of Things). Currently, WSNs provide data in different formats. There is a lack of communication protocol standardization, which turns into interoperability issues when connecting different sensor networks or even when connecting different sensor nodes within the same network. This work presents a sensorized platform proposal that adheres to the principles of the Internet of Things and the Web of Things. Wireless sensor nodes were built using open hardware solutions, and communications rely on the HTTP/IP Internet protocols. The Open Geospatial Consortium (OGC) SensorThings API candidate standard was used as a neutral format to avoid interoperability issues. An environmental WSN developed following the proposed architecture was built as a proof of concept. Details on how to build each node and a study regarding energy concerns are presented. PMID:25756864

Coupling of a distributed stakeholder-built system dynamics socio-economic model with SAHYSMOD for sustainable soil salinity management - Part 1: Model development

NASA Astrophysics Data System (ADS)

Inam, Azhar; Adamowski, Jan; Prasher, Shiv; Halbe, Johannes; Malard, Julien; Albano, Raffaele

2017-08-01

Effective policies, leading to sustainable management solutions for land and water resources, require a full understanding of interactions between socio-economic and physical processes. However, the complex nature of these interactions, combined with limited stakeholder engagement, hinders the incorporation of socio-economic components into physical models. The present study addresses this challenge by integrating the physical Spatial Agro Hydro Salinity Model (SAHYSMOD) with a participatory group-built system dynamics model (GBSDM) that includes socio-economic factors. A stepwise process to quantify the GBSDM is presented, along with governing equations and model assumptions. Sub-modules of the GBSDM, describing agricultural, economic, water and farm management factors, are linked together with feedbacks and finally coupled with the physically based SAHYSMOD model through commonly used tools (i.e., MS Excel and a Python script). The overall integrated model (GBSDM-SAHYSMOD) can be used to help facilitate the role of stakeholders with limited expertise and resources in model and policy development and implementation. Following the development of the integrated model, a testing methodology was used to validate the structure and behavior of the integrated model. Model robustness under different operating conditions was also assessed. The model structure was able to produce anticipated real behaviours under the tested scenarios, from which it can be concluded that the formulated structures generate the right behaviour for the right reasons.

Effect of Nb addition on microstructure and corrosion resistance of novel stainless steels fabricated by direct laser metal deposition

NASA Astrophysics Data System (ADS)

Wu, S. Q.; Zhang, C. H.; Zhang, S.; Wang, Q.; Liu, Y.; Abdullah, Adil O.

2018-03-01

The study demonstrated the successful fabrication of novel stainless steels by direct laser metal deposition with the aim of investigating the impact of niobium content (Nb = 0, 0.25, 0.75, 1.25 wt%) on their microstructure and electrochemical properties. The microstructure and phase evolution of the as-built stainless steels were studied using scanning electron microscope (SEM) and electron back-scatter diffraction (EBSD). Corrosion behavior of the samples was evaluated using electrochemical workstation in 3.5 wt% NaCl. Experimental results have shown that the crystal structure of as-built stainless steels was BCC with a small trace of dispersive carbides and FCC phase. Grain refinement was observed with increasing niobium content. Large-angle boundaries were obtained in different Nb-containing samples with distribution from 50° to 60°. An increase in niobium content extremely improved the corrosion resistance of as-built stainless steels and the as-built samples with 1.25 wt% exhibited the best corrosion resistance among the tested samples as indicated by its lowest corrosion rate, which was an order of magnitude lower than that of Nb-free samples.

Categorisation of built environment characteristics: the trouble with tertiles.

PubMed

Lamb, Karen E; White, Simon R

2015-02-15

In the analysis of the effect of built environment features on health, it is common for researchers to categorise built environment exposure variables based on arbitrary percentile cut-points, such as median or tertile splits. This arbitrary categorisation leads to a loss of information and a lack of comparability between studies since the choice of cut-point is based on the sample distribution. In this paper, we highlight the various drawbacks of adopting percentile categorisation of exposure variables. Using data from the SocioEconomic Status and Activity in Women (SESAW) study from Melbourne, Australia, we highlight alternative approaches which may be used instead of percentile categorisation in order to assess built environment effects on health. We discuss these approaches using an example which examines the association between the number of accessible supermarkets and body mass index. We show that alternative approaches to percentile categorisation, such as transformations of the exposure variable or factorial polynomials, can be implemented easily using standard statistical software packages. These procedures utilise all of the available information available in the data, avoiding a loss of power as experienced when categorisation is adopted.We argue that researchers should retain all available information by using the continuous exposure, adopting transformations where necessary.

A Pattern-Based Definition of Urban Context Using Remote Sensing and GIS

PubMed Central

Benza, Magdalena; Weeks, John R.; Stow, Douglas A.; López-Carr, David; Clarke, Keith C.

2016-01-01

In Sub-Saharan Africa rapid urban growth combined with rising poverty is creating diverse urban environments, the nature of which are not adequately captured by a simple urban-rural dichotomy. This paper proposes an alternative classification scheme for urban mapping based on a gradient approach for the southern portion of the West African country of Ghana. Landsat Enhanced Thematic Mapper Plus (ETM+) and European Remote Sensing Satellite-2 (ERS-2) synthetic aperture radar (SAR) imagery are used to generate a pattern based definition of the urban context. Spectral mixture analysis (SMA) is used to classify a Landsat scene into Built, Vegetation and Other land covers. Landscape metrics are estimated for Built and Vegetation land covers for a 450 meter uniform grid covering the study area. A measure of texture is extracted from the SAR imagery and classified as Built/Non-built. SMA based measures of Built and Vegetation fragmentation are combined with SAR texture based Built/Non-built maps through a decision tree classifier to generate a nine class urban context map capturing the transition from unsettled land at one end of the gradient to the compact urban core at the other end. Training and testing of the decision tree classifier was done using very high spatial resolution reference imagery from Google Earth. An overall classification agreement of 77% was determined for the nine-class urban context map, with user’s accuracy (commission errors) being lower than producer’s accuracy (omission errors). Nine urban contexts were classified and then compared with data from the 2000 Census of Ghana. Results suggest that the urban classes appropriately differentiate areas along the urban gradient. PMID:27867227

Identifying research needs for wheelchair transfers in the built environment.

PubMed

Crytzer, Theresa Marie; Cooper, Rory; Jerome, Genevieve; Koontz, Alicia

2017-02-01

The purpose of this study is to describe the results of focus groups held during the Independent Wheelchair Transfer (IWT) Workgroup. The aims were to facilitate exchange of ideas on (1) the impact of the built environment on the wheelchair transfer process within the community (i.e. moving from wheelchair to and from other surfaces (e.g. furniture, toilet seat, bath bench, car seat) to participate in daily activities), (2) wheelchair users' needs during transfers in the built environment, and (3) future research directions. Live web-based conferencing using Adobe Connect technology (Clarix Technologies, Inc., Pittsford, NY) was utilized to conduct three focus groups composed of experts in the field of assistive technology. Investigators independently reviewed focus group meeting transcripts and used qualitative methods to identify main themes. Thirty-one experts in assistive technology and related fields participated in focus groups. Nine main themes were found including the effect of transfer skills training, space considerations in the built environment, wheelchair configuration, and the interaction between the built environment, user preferences, and transfer techniques. All groups raised issues about the transfer process in areas of the built environment with limited access, the effect of wheelchair users' transfer techniques, and user preferences during transfers. The area of independent transfers is multi-faceted and several factors require consideration when contemplating environmental changes to improve accessibility for wheelchair users. Obvious opportunity exists for research which could lead to advances in transfer technology, environments, and techniques for wheelchair users. Implications for Rehabilitation Tremendous opportunities for research collaborations in the field of assistive technology: To develop new terminology to describe wheelchair transfers. To improve the design of the built environment for wheelchair users. To investigate wheelchair transfer training techniques.

A Pattern-Based Definition of Urban Context Using Remote Sensing and GIS.

PubMed

Benza, Magdalena; Weeks, John R; Stow, Douglas A; López-Carr, David; Clarke, Keith C

2016-09-15

In Sub-Saharan Africa rapid urban growth combined with rising poverty is creating diverse urban environments, the nature of which are not adequately captured by a simple urban-rural dichotomy. This paper proposes an alternative classification scheme for urban mapping based on a gradient approach for the southern portion of the West African country of Ghana. Landsat Enhanced Thematic Mapper Plus (ETM+) and European Remote Sensing Satellite-2 (ERS-2) synthetic aperture radar (SAR) imagery are used to generate a pattern based definition of the urban context. Spectral mixture analysis (SMA) is used to classify a Landsat scene into Built, Vegetation and Other land covers. Landscape metrics are estimated for Built and Vegetation land covers for a 450 meter uniform grid covering the study area. A measure of texture is extracted from the SAR imagery and classified as Built/Non-built. SMA based measures of Built and Vegetation fragmentation are combined with SAR texture based Built/Non-built maps through a decision tree classifier to generate a nine class urban context map capturing the transition from unsettled land at one end of the gradient to the compact urban core at the other end. Training and testing of the decision tree classifier was done using very high spatial resolution reference imagery from Google Earth. An overall classification agreement of 77% was determined for the nine-class urban context map, with user's accuracy (commission errors) being lower than producer's accuracy (omission errors). Nine urban contexts were classified and then compared with data from the 2000 Census of Ghana. Results suggest that the urban classes appropriately differentiate areas along the urban gradient.

Force-free electrodynamics in dynamical curved spacetimes

NASA Astrophysics Data System (ADS)

McWilliams, Sean

2015-04-01

We present results on our study of force-free electrodynamics in curved spacetimes. Specifically, we present several improvements to what has become the established set of evolution equations, and we apply these to study the nonlinear stability of analytically known force-free solutions for the first time. We implement our method in a new pseudo-spectral code built on top of the SpEC code for evolving dynamic spacetimes. Finally, we revisit these known solutions and attempt to clarify some interesting properties that render them analytically tractable. Finally, we preview some new work that similarly revisits the established approach to solving another problem in numerical relativity: the post-merger recoil from asymmetric gravitational-wave emission. These new results may have significant implications for the parameter dependence of recoils, and consequently on the statistical expectations for recoil velocities of merged systems.

The Influence of Weather Variation, Urban Design and Built Environment on Objectively Measured Sedentary Behaviour in Children.

PubMed

Katapally, Tarun Reddy; Rainham, Daniel; Muhajarine, Nazeem

2016-01-01

With emerging evidence indicating that independent of physical activity, sedentary behaviour (SB) can be detrimental to health, researchers are increasingly aiming to understand the influence of multiple contexts such as urban design and built environment on SB. However, weather variation, a factor that continuously interacts with all other environmental variables, has been consistently underexplored. This study investigated the influence of diverse environmental exposures (including weather variation, urban design and built environment) on SB in children. This cross-sectional observational study is part of an active living research initiative set in the Canadian prairie city of Saskatoon. Saskatoon's neighbourhoods were classified based on urban street design into grid-pattern, fractured grid-pattern and curvilinear types of neighbourhoods. Diverse environmental exposures were measured including, neighbourhood built environment, and neighbourhood and household socioeconomic environment. Actical accelerometers were deployed between April and June 2010 (spring-summer) to derive SB of 331 10-14 year old children in 25 one week cycles. Each cycle of accelerometry was conducted on a different cohort of children within the total sample. Accelerometer data were matched with localized weather patterns derived from Environment Canada weather data. Multilevel modeling using Hierarchical Linear and Non-linear Modeling software was conducted by factoring in weather variation to depict the influence of diverse environmental exposures on SB. Both weather variation and urban design played a significant role in SB. After factoring in weather variation, it was observed that children living in grid-pattern neighbourhoods closer to the city centre (with higher diversity of destinations) were less likely to be sedentary. This study demonstrates a methodology that could be replicated to integrate geography-specific weather patterns with existing cross-sectional accelerometry data to understand the influence of urban design and built environment on SB in children.

Comparison Between Spectral, Spatial and Polarimetric Classification of Urban and Periurban Landcover Using Temporal Sentinel - 1 Images

NASA Astrophysics Data System (ADS)

Roychowdhury, K.

2016-06-01

Landcover is the easiest detectable indicator of human interventions on land. Urban and peri-urban areas present a complex combination of landcover, which makes classification challenging. This paper assesses the different methods of classifying landcover using dual polarimetric Sentinel-1 data collected during monsoon (July) and winter (December) months of 2015. Four broad landcover classes such as built up areas, water bodies and wetlands, vegetation and open spaces of Kolkata and its surrounding regions were identified. Polarimetric analyses were conducted on Single Look Complex (SLC) data of the region while ground range detected (GRD) data were used for spectral and spatial classification. Unsupervised classification by means of K-Means clustering used backscatter values and was able to identify homogenous landcovers over the study area. The results produced an overall accuracy of less than 50% for both the seasons. Higher classification accuracy (around 70%) was achieved by adding texture variables as inputs along with the backscatter values. However, the accuracy of classification increased significantly with polarimetric analyses. The overall accuracy was around 80% in Wishart H-A-Alpha unsupervised classification. The method was useful in identifying urban areas due to their double-bounce scattering and vegetated areas, which have more random scattering. Normalized Difference Built-up index (NDBI) and Normalized Difference Vegetation Index (NDVI) obtained from Landsat 8 data over the study area were used to verify vegetation and urban classes. The study compares the accuracies of different methods of classifying landcover using medium resolution SAR data in a complex urban area and suggests that polarimetric analyses present the most accurate results for urban and suburban areas.

The Forminalized Rat: A Convenient Microbial Ecosystem.

ERIC Educational Resources Information Center

Lee, Adrian

1984-01-01

Presents a series of experiments built around the bacteria found in the intestinal tract of formalinized rats as a model for discussing microbial ecology. Describes methods of examination of intestinal content, student tasks, and discussion questions; also gives a challenge problem to solve.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The final design, performance analysis, and economic analysis of a solar hot water system for curing concrete blocks at the new Rotoclave block fabricating plant being built by the York Building Products Co. Inc. at Harrisburg, Pa. are presented. The system will use AAI Corporation's 24/1 concentrating collectors. (WHK)

MULTI-FACETED SUSTAINABILITY ON ITHACA COLLEGE NATURAL LANDS

EPA Science Inventory

This student-generated proposal presents a multi-faceted program for sustainable stewardship of the natural areas south of the built campus of Ithaca College. Our challenge is to use student research and class projects to enhance biodiversity, support education and research, and...

American Fuel Cell Bus Project Evaluation : Third Report

DOT National Transportation Integrated Search

2017-05-01

This report presents results of the American Fuel Cell Bus (AFCB) Project, a demonstration of fuel cell electric buses (FCEB) operating in the Coachella Valley area of California. The AFCB, built on an ElDorado National-California 40-foot Axess bus p...

An experimental evaluation of the REE SIFT environment for spaceborne applications

NASA Technical Reports Server (NTRS)

Whistnant, K.; Iyer, R. K.; Jones, P.; Some, R.; Rennels, D.

2002-01-01

This paper presents an experimental evaluation of a software-implemented fault tolerance environment built around a set of self-checking ARMOR proceses running on different machines that provide error detection and recovery services to themselves and to spaceborne scientific applications.

[Design and implementation of the ELSA-Brasil biobank: a prospective study in a Brazilian population].

PubMed

Pereira, Alexandre C; Bensenor, Isabela M; Fedeli, Ligia M; Castilhos, Cristina; Vidigal, Pedro G; Maniero, Viviane; Leite, Claudia M; Pimentel, Robercia A; Duncan, Bruce B; Mill, Jose Geraldo; Lotufo, Paulo A

2013-06-01

The Brazilian Longitudinal Study for Adult Health (ELSA-Brasil) is a multicenter prospective cohort of civil servants designed to assess the determinants of chronic diseases, especially cardiovascular diseases and type 2 diabetes. The present article describes the main design and implementation points of the ELSA-Brasil biobank project. Economic, political, logistical and technological aspects of this study are characterized. Additionally, it discusses the final biorepository protocol and the facilities implemented to achieve this objective. The design and implementation process of the ELSA-Brasil biobank took three years to be performed. Both the central and local biobanks were built according to the best biorepository techniques, using different technological solutions for the distinct needs expected in this study.

The impact of death awareness on sizes of self-representational objects.

PubMed

McCabe, Simon; Vail, Kenneth E; Arndt, Jamie

2018-01-01

People seem to have a tendency to increase the relative size of self-representational objects. Prior research suggests that motivational factors may fuel that tendency, so the present research built from terror management theory to examine whether existential motivations - engendered by concerns about death - may have similar implications for self-relevant size biases. Specifically, across two studies (total N = 288), we hypothesized that reminders of death would lead participants to inflate the size of self-representational objects. Both studies suggested that relative to reminders of pain, mortality salience led participants to construct larger clay sculptures of themselves (vs. others; Study 1) and a larger ostensible video game avatar for the self (vs. others; Study 2). © 2017 The British Psychological Society.

One Bedroom Units: Floor Plan, South Elevation (As Built), North ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

One Bedroom Units: Floor Plan, South Elevation (As Built), North Elevation (As Built), Section A-A (As Built), Section AA (Existing) - Aluminum City Terrace, East Hill Drive, New Kensington, Westmoreland County, PA

Advanced Information Processing System (AIPS)-based fault tolerant avionics architecture for launch vehicles

NASA Technical Reports Server (NTRS)

Lala, Jaynarayan H.; Harper, Richard E.; Jaskowiak, Kenneth R.; Rosch, Gene; Alger, Linda S.; Schor, Andrei L.

1990-01-01

An avionics architecture for the advanced launch system (ALS) that uses validated hardware and software building blocks developed under the advanced information processing system program is presented. The AIPS for ALS architecture defined is preliminary, and reliability requirements can be met by the AIPS hardware and software building blocks that are built using the state-of-the-art technology available in the 1992-93 time frame. The level of detail in the architecture definition reflects the level of detail available in the ALS requirements. As the avionics requirements are refined, the architecture can also be refined and defined in greater detail with the help of analysis and simulation tools. A useful methodology is demonstrated for investigating the impact of the avionics suite to the recurring cost of the ALS. It is shown that allowing the vehicle to launch with selected detected failures can potentially reduce the recurring launch costs. A comparative analysis shows that validated fault-tolerant avionics built out of Class B parts can result in lower life-cycle-cost in comparison to simplex avionics built out of Class S parts or other redundant architectures.

PLANS: A finite element program for nonlinear analysis of structures. Volume 1: Theoretical manual

NASA Technical Reports Server (NTRS)

Pifko, A.; Levine, H. S.; Armen, H., Jr.

1975-01-01

The PLANS system is described which is a finite element program for nonlinear analysis. The system represents a collection of special purpose computer programs each associated with a distinct physical problem class. Modules of PLANS specifically referenced and described in detail include: (1) REVBY, for the plastic analysis of bodies of revolution; (2) OUT-OF-PLANE, for the plastic analysis of 3-D built-up structures where membrane effects are predominant; (3) BEND, for the plastic analysis of built-up structures where bending and membrane effects are significant; (4) HEX, for the 3-D elastic-plastic analysis of general solids; and (5) OUT-OF-PLANE-MG, for material and geometrically nonlinear analysis of built-up structures. The SATELLITE program for data debugging and plotting of input geometries is also described. The theoretical foundations upon which the analysis is based are presented. Discussed are the form of the governing equations, the methods of solution, plasticity theories available, a general system description and flow of the programs, and the elements available for use.

Gaze-Aware Streaming Solutions for the Next Generation of Mobile VR Experiences.

PubMed

Lungaro, Pietro; Sjoberg, Rickard; Valero, Alfredo Jose Fanghella; Mittal, Ashutosh; Tollmar, Konrad

2018-04-01

This paper presents a novel approach to content delivery for video streaming services. It exploits information from connected eye-trackers embedded in the next generation of VR Head Mounted Displays (HMDs). The proposed solution aims to deliver high visual quality, in real time, around the users' fixations points while lowering the quality everywhere else. The goal of the proposed approach is to substantially reduce the overall bandwidth requirements for supporting VR video experiences while delivering high levels of user perceived quality. The prerequisites to achieve these results are: (1) mechanisms that can cope with different degrees of latency in the system and (2) solutions that support fast adaptation of video quality in different parts of a frame, without requiring a large increase in bitrate. A novel codec configuration, capable of supporting near-instantaneous video quality adaptation in specific portions of a video frame, is presented. The proposed method exploits in-built properties of HEVC encoders and while it introduces a moderate amount of error, these errors are indetectable by users. Fast adaptation is the key to enable gaze-aware streaming and its reduction in bandwidth. A testbed implementing gaze-aware streaming, together with a prototype HMD with in-built eye tracker, is presented and was used for testing with real users. The studies quantified the bandwidth savings achievable by the proposed approach and characterize the relationships between Quality of Experience (QoE) and network latency. The results showed that up to 83% less bandwidth is required to deliver high QoE levels to the users, as compared to conventional solutions.

A method for the inclusion of physical activity-related health benefits in cost-benefit analysis of built environment initiatives.

PubMed

Zapata-Diomedi, Belen; Gunn, Lucy; Giles-Corti, Billie; Shiell, Alan; Lennert Veerman, J

2018-01-01

The built environment has a significant influence on population levels of physical activity (PA) and therefore health. However, PA-related health benefits are seldom considered in transport and urban planning (i.e. built environment interventions) cost-benefit analysis. Cost-benefit analysis implies that the benefits of any initiative are valued in monetary terms to make them commensurable with costs. This leads to the need for monetised values of the health benefits of PA. The aim of this study was to explore a method for the incorporation of monetised PA-related health benefits in cost-benefit analysis of built environment interventions. Firstly, we estimated the change in population level of PA attributable to a change in the built environment due to the intervention. Then, changes in population levels of PA were translated into monetary values. For the first step we used estimates from the literature for the association of built environment features with physical activity outcomes. For the second step we used the multi-cohort proportional multi-state life table model to predict changes in health-adjusted life years and health care costs as a function of changes in PA. Finally, we monetised health-adjusted life years using the value of a statistical life year. Future research could adapt these methods to assess the health and economic impacts of specific urban development scenarios by working in collaboration with urban planners. Copyright © 2017 Elsevier Inc. All rights reserved.

Pedestrians' perceptions of walkability and safety in relation to the built environment in Cali, Colombia, 2009-10.

PubMed

Villaveces, Andrés; Nieto, Luis Alfonso; Ortega, Delia; Ríos, José Fernando; Medina, John Jairo; Gutiérrez, María Isabel; Rodríguez, Daniel

2012-10-01

To assess pedestrians' perceptions of the walkability of the urban environment and pedestrian safety in Cali, Colombia. Standardised intercept interviews were conducted of 400 pedestrians walking in 20 randomly selected urban zones to ascertain frequency of walking, and perceptions of safety, the built environment and security. Four focus group meetings were held with community members and students addressing these issues in an open-ended forum. The study analysed quantitative data collected in street interviews and qualitative information from focus groups addressing respondents' views on problems for pedestrians, how the built environment affects walking and ideal walking conditions. Access to public transportation was deemed the most positive characteristic of the built environment and 61% of respondents liked walking in the street. When disaggregating street conditions, the majority of pedestrians were dissatisfied with their walking experiences. Pedestrians cited lack of respect for norms, personal safety and built environment characteristics as their main concerns. Among frequent walkers, residents tended to rate their neighbourhoods more negatively compared with non-residents. Through qualitative interviews it became apparent that narrow sidewalks that are frequently obstructed by motor vehicles are a key reason for pedestrian dissatisfaction. A perception of overall insecurity further determines how pedestrians assess or modulate their walking in this city. Overall, walking in Cali was perceived negatively by pedestrians because of built environment characteristics and perceptions of insecurity. Qualitative information used to complement intercept surveys can provide a better way to identify pedestrian-specific transport-related problems.

Intelligent assistant carer for active aging

NASA Astrophysics Data System (ADS)

Bizjak, Jani; Gradišek, Anton; Stepančič, Luka; Gjoreski, Hristijan; Gams, Matjaž

2017-12-01

We present the concept of an Intelligent Assistant Carer system for the elderly, designed to help with active aging and to facilitate the interactions with carers. The system is modular, allowing the users to choose the appropriate functions according to their needs, and is built on an open platform in order to make it compatible with third-party products and services. Currently, the system consists of a wearable device (a smartwatch) and an internet portal that manages the data and takes care of the interactions between the user, the carers, and the support services. We present in detail one of the modules, i.e., fall detection, and the results of a pilot study for the system on 150 users over the course of 3 months.

Semantics-enabled service discovery framework in the SIMDAT pharma grid.

PubMed

Qu, Cangtao; Zimmermann, Falk; Kumpf, Kai; Kamuzinzi, Richard; Ledent, Valérie; Herzog, Robert

2008-03-01

We present the design and implementation of a semantics-enabled service discovery framework in the data Grids for process and product development using numerical simulation and knowledge discovery (SIMDAT) Pharma Grid, an industry-oriented Grid environment for integrating thousands of Grid-enabled biological data services and analysis services. The framework consists of three major components: the Web ontology language (OWL)-description logic (DL)-based biological domain ontology, OWL Web service ontology (OWL-S)-based service annotation, and semantic matchmaker based on the ontology reasoning. Built upon the framework, workflow technologies are extensively exploited in the SIMDAT to assist biologists in (semi)automatically performing in silico experiments. We present a typical usage scenario through the case study of a biological workflow: IXodus.

Validated Feasibility Study of Integrally Stiffened Metallic Fuselage Panels for Reducing Manufacturing Costs: Cost Assessment of Manufacturing/Design Concepts

NASA Technical Reports Server (NTRS)

Metschan, S.

2000-01-01

The objective of the Integral Airframe Structures (IAS) program was to demonstrate, for an integrally stiffened structural concept, performance and weight equal to "built-up" structure with lower manufacturing cost. This report presents results of the cost assessment for several design configuration/manufacturing method combinations. The attributes of various cost analysis models were evaluated and COSTRAN selected for this study. A process/design cost evaluation matrix was developed based on material, forming, machining, and assembly of structural sub-elements and assembled structure. A hybrid design, made from high-speed machined extruded frames that are mechanically fastened to high-speed machined plate skin/stringer panels, was identified as the most cost-effective manufacturing solution. Recurring labor and material costs of the hybrid design are up to 61 percent less than the current built-up technology baseline. This would correspond to a total cost reduction of $1.7 million per ship set for a 777-sized airplane. However, there are important outstanding issues with regard to the cost of capacity of high technology machinery, and the ability to cost-effectively provide surface finish acceptable to the commercial aircraft industry. The projected high raw material cost of large extrusions also played an important role in the trade-off between plate and extruded concepts.

The effect of canopy closure on chimpanzee nest abundance in Lagoas de Cufada National Park, Guinea-Bissau.

PubMed

Sousa, Joana; Casanova, Catarina; Barata, André V; Sousa, Cláudia

2014-04-01

The present study aimed to gather baseline information about chimpanzee nesting and density in Lagoas de Cufada Natural Park (LCNP), in Guinea-Bissau. Old and narrow trails were followed to estimate chimpanzee density through marked-nest counts and to test the effect of canopy closure (woodland savannah, forest with a sparse canopy, and forest with a dense canopy) on nest distribution. Chimpanzee abundance was estimated at 0.79 nest builders/km(2), the lowest among the areas of Guinea-Bissau with currently studied chimpanzee populations. Our data suggest that sub-humid forest with a dense canopy accounts for significantly higher chimpanzee nest abundance (1.50 nests/km of trail) than sub-humid forest with a sparse canopy (0.49 nests/km of trail) or woodland savannah (0.30 nests/km of trail). Dense-canopy forests play an important role in chimpanzee nesting in the patchy and highly humanized landscape of LCNP. The tree species most frequently used for nesting are Dialium guineense (46%) and Elaeis guineensis (28%). E. guineensis contain nests built higher in the canopy, while D. guineense contain nests built at lower heights. Nests observed during baseline sampling and replications suggest seasonal variations in the tree species used for nest building.

Grid Computing Environment using a Beowulf Cluster

NASA Astrophysics Data System (ADS)

Alanis, Fransisco; Mahmood, Akhtar

2003-10-01

Custom-made Beowulf clusters using PCs are currently replacing expensive supercomputers to carry out complex scientific computations. At the University of Texas - Pan American, we built a 8 Gflops Beowulf Cluster for doing HEP research using RedHat Linux 7.3 and the LAM-MPI middleware. We will describe how we built and configured our Cluster, which we have named the Sphinx Beowulf Cluster. We will describe the results of our cluster benchmark studies and the run-time plots of several parallel application codes that were compiled in C on the cluster using the LAM-XMPI graphics user environment. We will demonstrate a "simple" prototype grid environment, where we will submit and run parallel jobs remotely across multiple cluster nodes over the internet from the presentation room at Texas Tech. University. The Sphinx Beowulf Cluster will be used for monte-carlo grid test-bed studies for the LHC-ATLAS high energy physics experiment. Grid is a new IT concept for the next generation of the "Super Internet" for high-performance computing. The Grid will allow scientist worldwide to view and analyze huge amounts of data flowing from the large-scale experiments in High Energy Physics. The Grid is expected to bring together geographically and organizationally dispersed computational resources, such as CPUs, storage systems, communication systems, and data sources.

Performance studies of Cryocooler based cryosorption pumps with indigenous activated carbons for fusion applications

NASA Astrophysics Data System (ADS)

Kasthurirengan, S.; Vivek, G. A.; Verma, Ravi; Behera, Upendra; Udgata, Swarup; Gangradey, Ranjana

2017-02-01

Cryosorption pumps are the only solution for pumping helium and hydrogen in fusion systems, due to their high pumping speeds and suitability in harsh environments. Their development requires the right Activated Carbons (ACs) and suitable adhesives to bind them to metallic panels with liquid helium (LHe) flow channels. However, their performance evaluation will require large quantities of LHe. Alternatively, these pumps can be built with small size panels adhered with ACs and cooled by a cryocooler. The paper describes the development of a cryopump using a commercial cryocooler (Sumitomo RDK415D), with 1.5W@4.2 K, integrated with small size AC panel mounted on 2nd stage, with the 1st stage acting as radiation shield. Under no load, the cryopump reaches the ultimate pressure of 2.1E-7 mbar. The pump is built using panels with different indigenously developed ACs such as granules, pellets, ACF-FK2 and activated carbon of knitted IPR cloth. We present the experimental results of pumping speeds for gases such as nitrogen, argon and helium using the procedures outlined by American Vacuum Society (AVS). These studies will enable to arrive at the right ACs and adhesives for the development of large scale cryosorption pumps with liquid helium flow.

Education in physics and the support of professional orientation of pupils

NASA Astrophysics Data System (ADS)

ŠebeÅ, Vladimír; Lapitková, Viera

2017-01-01

Authors in the article present some of the conclusions resulting from execution of a national project ITMS: 26110130549 "Support for guidance primary school pupils for vocational education and training through the development of polytechnic education aimed at developing work skills and work with talents". Authors focus on the influence of selected determinants of students' interest in Physics. Outputs linked to the increase of pupils' knowledge of physics; ways of increasing interest in physics and thus influencing the choice of secondary studies are presented based on two-year research that was realized in forms of experimental activities in newly built laboratories. Selection of physics experiments realized during lessons was determined by implementation of innovative teaching aids and information and communication technologies. The most important results that were analysed related to the research were presented.

Study protocol for a natural experiment in a lower socioeconomic area to examine the health-related effects of refurbishment to parks including built-shade (ShadePlus).

PubMed

Dobbinson, S J; Veitch, J; Salmon, J; Wakefield, M; Staiger, P K; MacInnis, R J; Simmons, J

2017-02-22

Parks in disadvantaged suburbs often have low quality and few amenities, which is likely to result in them being underutilised for recreation and physical activity. Refurbishment of parks, including shade, walking paths and other amenities, may have broad health-related benefits. The study design, methods and planned analyses for a natural experiment examining the effects of refurbishments including built-shade added to parks in disadvantaged outer suburbs of Melbourne are described. Three intervention parks and three comparison parks matched for equivalence of park and neighbourhood characteristics were selected. Using mixed methods, the outcomes will be assessed during three consecutive spring-summer periods (T1: 2013-2014; T2: 2014-2015: T3: 2015-2016). Primary outcomes included: observed park use, physical activity and shade use. Self-reported social connectedness, community engagement and psychological well-being were assessed as secondary outcomes. This study was approved by Cancer Council Victoria's Human Research Ethics Committee. Studies such as ShadePlus can improve understanding of the broader effects of park refurbishments (including physical activity levels and sun protection behaviours, as well as social connectedness and psychological well-being). The study findings will be disseminated through established urban planning and parks and recreation networks, peer review publications and conference presentations. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Scanning Probe Microscopies and Their Applications Towards the Study of Superconductors

NASA Astrophysics Data System (ADS)

Helfrich, Jennifer Ann

1995-11-01

The invention of the scanning tunneling microscope (STM) in 1982 made it possible to study surfaces and structures at resolutions previously believed unattainable. Adapting the STM for low temperatures makes it possible to study superconductors with new methods and to obtain valuable information. This thesis describes a novel low temperature STM (LTSTM) that was designed and built at Northwestern University for the purpose of studying superconductors in the mixed state. At low temperatures, this LTSTM has a scan range an order of magnitude larger than other LTSTM's designed elsewhere. It is capable of low temperature imaging and obtaining dI/dV vs. V curves. A detailed study of magnetic force microscopy (MFM) probes is also presented. The fields and forces between probe and surface were computer modeled. These results are compared with results from electron holographs of MFM probes. The final section of the thesis describes an a.c. susceptibility measurement on a UPt_3 sphere. Results are presented and discussed.

Bayesian accrual prediction for interim review of clinical studies: open source R package and smartphone application.

PubMed

Jiang, Yu; Guarino, Peter; Ma, Shuangge; Simon, Steve; Mayo, Matthew S; Raghavan, Rama; Gajewski, Byron J

2016-07-22

Subject recruitment for medical research is challenging. Slow patient accrual leads to increased costs and delays in treatment advances. Researchers need reliable tools to manage and predict the accrual rate. The previously developed Bayesian method integrates researchers' experience on former trials and data from an ongoing study, providing a reliable prediction of accrual rate for clinical studies. In this paper, we present a user-friendly graphical user interface program developed in R. A closed-form solution for the total subjects that can be recruited within a fixed time is derived. We also present a built-in Android system using Java for web browsers and mobile devices. Using the accrual software, we re-evaluated the Veteran Affairs Cooperative Studies Program 558- ROBOTICS study. The application of the software in monitoring and management of recruitment is illustrated for different stages of the trial. This developed accrual software provides a more convenient platform for estimation and prediction of the accrual process.

Quiet Clean Short-Haul Experimental Engine (QSCEE). Preliminary analyses and design report, volume 1

NASA Technical Reports Server (NTRS)

1974-01-01

The experimental propulsion systems to be built and tested in the 'quiet, clean, short-haul experimental engine' program are presented. The flight propulsion systems are also presented. The following areas are discussed: acoustic design; emissions control; engine cycle and performance; fan aerodynamic design; variable-pitch actuation systems; fan rotor mechanical design; fan frame mechanical design; and reduction gear design.

The Slate all metal airship

NASA Technical Reports Server (NTRS)

Slate, C. C.; Neumann, R. D.

1975-01-01

The development of the Slate all metal airship City of Glendale built and completed in 1930 is presented. The airship facilities are discussed. Pertinent data which led to other engineering accomplishments for aviation are shown. The SMD-100 concept is presented along with a brief commentary on the costs and problems involved in such an airship design and the application of the hoisting and elevator facilities to airship development.

Feature combination networks for the interpretation of statistical machine learning models: application to Ames mutagenicity.

PubMed

Webb, Samuel J; Hanser, Thierry; Howlin, Brendan; Krause, Paul; Vessey, Jonathan D

2014-03-25

A new algorithm has been developed to enable the interpretation of black box models. The developed algorithm is agnostic to learning algorithm and open to all structural based descriptors such as fragments, keys and hashed fingerprints. The algorithm has provided meaningful interpretation of Ames mutagenicity predictions from both random forest and support vector machine models built on a variety of structural fingerprints.A fragmentation algorithm is utilised to investigate the model's behaviour on specific substructures present in the query. An output is formulated summarising causes of activation and deactivation. The algorithm is able to identify multiple causes of activation or deactivation in addition to identifying localised deactivations where the prediction for the query is active overall. No loss in performance is seen as there is no change in the prediction; the interpretation is produced directly on the model's behaviour for the specific query. Models have been built using multiple learning algorithms including support vector machine and random forest. The models were built on public Ames mutagenicity data and a variety of fingerprint descriptors were used. These models produced a good performance in both internal and external validation with accuracies around 82%. The models were used to evaluate the interpretation algorithm. Interpretation was revealed that links closely with understood mechanisms for Ames mutagenicity. This methodology allows for a greater utilisation of the predictions made by black box models and can expedite further study based on the output for a (quantitative) structure activity model. Additionally the algorithm could be utilised for chemical dataset investigation and knowledge extraction/human SAR development.

Performance testing of a 50 kW VAWT in a built-up environment

NASA Technical Reports Server (NTRS)

Schienbein, L. A.

1981-01-01

The results of performance tests of a DAF Indal 50 kW vertical axis wind turbine are presented. Results of limited free stream turbulence and vertical wind shear measurements at the site are also presented. The close agreement between measured and predicted energy outputs, required to verify the wind turbine power output performance relationship, was not attained. A discussion is presented of factors that may have contributed to the lack of better agreement.

The urban built environment and associations with women's psychosocial health.

PubMed

Messer, Lynne C; Maxson, Pamela; Miranda, Marie Lynn

2013-10-01

The determinants that underlie a healthy or unhealthy pregnancy are complex and not well understood. We assess the relationship between the built environment and maternal psychosocial status using directly observed residential neighborhood characteristics (housing damage, property disorder, tenure status, vacancy, security measures, violent crime, and nuisances) and a wide range of psychosocial attributes (interpersonal support evaluation list, self-efficacy, John Henryism active coping, negative partner support, Perceived Stress Scale, perceived racism, Center for Epidemiologic Studies-Depression) on a pregnant cohort of women living in the urban core of Durham, NC, USA. We found some associations between built environment characteristic and psychosocial health varied by exposure categorization approach, while others (residence in environments with more rental property is associated with higher reported active coping and negative partner support) were consistent across exposure categorizations. This study outlines specific neighborhood characteristics that are modifiable risk markers and therefore important targets for increased research and public health intervention.

[A new machinability test machine and the machinability of composite resins for core built-up].

PubMed

Iwasaki, N

2001-06-01

A new machinability test machine especially for dental materials was contrived. The purpose of this study was to evaluate the effects of grinding conditions on machinability of core built-up resins using this machine, and to confirm the relationship between machinability and other properties of composite resins. The experimental machinability test machine consisted of a dental air-turbine handpiece, a control weight unit, a driving unit of the stage fixing the test specimen, and so on. The machinability was evaluated as the change in volume after grinding using a diamond point. Five kinds of core built-up resins and human teeth were used in this study. The machinabilities of these composite resins increased with an increasing load during grinding, and decreased with repeated grinding. There was no obvious correlation between the machinability and Vickers' hardness; however, a negative correlation was observed between machinability and scratch width.

Systems architecture: a new model for sustainability and the built environment using nanotechnology, biotechnology, information technology, and cognitive science with living technology.

PubMed

Armstrong, Rachel

2010-01-01

This report details a workshop held at the Bartlett School of Architecture, University College London, to initiate interdisciplinary collaborations for the practice of systems architecture, which is a new model for the generation of sustainable architecture that combines the discipline of the study of the built environment with the scientific study of complexity, or systems science, and adopts the perspective of systems theory. Systems architecture offers new perspectives on the organization of the built environment that enable architects to consider architecture as a series of interconnected networks with embedded links into natural systems. The public workshop brought together architects and scientists working with the convergence of nanotechnology, biotechnology, information technology, and cognitive science and with living technology to investigate the possibility of a new generation of smart materials that are implied by this approach.

Impact of pest control strategies on the arthropodofauna living in bird nests built in nestboxes in pear and apple orchards.

PubMed

Roy, Lise; Bouvier, Jean-Charles; Lavigne, Claire; Galès, Mathieu; Buronfosse, Thierry

2013-08-01

Pesticide applications have a strong impact on biodiversity in agroecosystems. The present study aimed to assess the impact of pest control strategies on the arthropodofauna of Parus major nests built within nestboxes installed in orchards. Unlike many studied groups, these arthropod communities are not in direct contact with pesticide sprays (on account of their being sheltered by nestboxes) and are also unable to move away from the treated area. In this pilot study, we estimated the prevalence and the taxonomic and ecological diversities of arthropodofauna sampled in the nests and assessed the extent to which the whole and nest-specific arthropodofauna were affected by pest control strategies. Sixteen different insect and arachnid Primary Taxonomic Groups (PTGs, order level or below) were found in nests. The best represented PTGs (≥10% occurrence in years 2007 and 2008) were Psocoptera (Insecta, detritivorous/saprophagous), detritivorous/saprophagous Astigmata (Acari) and hematophagous Mesostigmata (Acari). Pest control strategies had a large impact on the prevalence of arthropods in nests, with higher proportions of nests hosting arthropods in organic orchards than in conventional orchards and with intermediate proportions in nests in Integrated Pest Management orchards. In contrast, pest control strategies had no significant effect on the composition of the arthropod communities when only nests hosting nidicolous arthropods were considered.

Estimating state of charge and health of lithium-ion batteries with guided waves using built-in piezoelectric sensors/actuators

NASA Astrophysics Data System (ADS)

Ladpli, Purim; Kopsaftopoulos, Fotis; Chang, Fu-Kuo

2018-04-01

This work presents the feasibility of monitoring state of charge (SoC) and state of health (SoH) of lithium-ion pouch batteries with acousto-ultrasonic guided waves. The guided waves are propagated and sensed using low-profile, built-in piezoelectric disc transducers that can be retrofitted onto off-the-shelf batteries. Both experimental and analytical studies are performed to understand the relationship between guided waves generated in a pitch-catch mode and battery SoC/SoH. The preliminary experiments on representative pouch cells show that the changes in time of flight (ToF) and signal amplitude (SA) resulting from shifts in the guided wave signals correlate strongly with the electrochemical charge-discharge cycling and aging. An analytical acoustic model is developed to simulate the variations in electrode moduli and densities during cycling, which correctly validates the absolute values and range of experimental ToF. It is further illustrated via a statistical study that ToF and SA can be used in a prediction model to accurately estimate SoC/SoH. Additionally, by using multiple sensors in a network configuration on the same battery, a significantly more reliable and accurate SoC/SoH prediction is achieved. The indicative results from this study can be extended to develop a unified guided-wave-based framework for SoC/SoH monitoring of many lithium-ion battery applications.

Fluid-Structure Interaction in a Fluid-Filled Composite Structure Subjected to Low Velocity Impact

DTIC Science & Technology

2016-06-01

for creating an E-glass composite cubic structure and a pendulum was designed and built to provide a repeatable low velocity impact. The behavior of...structure and a pendulum was designed and built to provide a repeatable low velocity impact. The behavior of the composite structure was studied at various...SET-UP .......................................................31  1.  Impact Pendulum

An Investigation into the Provision of Built Environment Education to Schools in London, the South East and Yorkshire and the Humber

ERIC Educational Resources Information Center

Kendall, Sally; Murfield, Jenny; Wilkin, Anne

2007-01-01

The report was commissioned by the Department for Culture Media and Sport (DCMS) to provide information on organizations providing education focusing on the built environment in three regions (London, the South East and Yorkshire and the Humber). The findings from this study will be used to inform "Engaging Places," a project from DCMS,…

Developing Built Environment Programs in Local Health Departments: Lessons Learned From a Nationwide Mentoring Program

PubMed Central

Rube, Kate; Veatch, Maggie; Huang, Katy; Lent, Megan; Goldstein, Gail P.; Lee, Karen K.

2014-01-01

Local health departments (LHDs) have a key role to play in developing built environment policies and programs to encourage physical activity and combat obesity and related chronic diseases. However, information to guide LHDs’ effective engagement in this arena is lacking. During 2011–2012, the New York City Department of Health and Mental Hygiene (DOHMH) facilitated a built environment peer mentoring program for 14 LHDs nationwide. Program objectives included supporting LHDs in their efforts to achieve built environment goals, offering examples from DOHMH’s built environment work to guide LHDs, and building a healthy built environment learning network. We share lessons learned that can guide LHDs in developing successful healthy built environment agendas. PMID:24625166

Heat-curved girders : deflections and camber loss during and subsequent to bridge construction.

DOT National Transportation Integrated Search

1982-01-01

The present AASHTO bridge design specifications require that additional camber be built into steel girders that are to be heat curved. The additional camber is provided to allow for subsequent losses due to the dissipation of residual stresses impose...

Evaluation of a Bench Top Mechanical Delinter

USDA-ARS?s Scientific Manuscript database

This presentation will report on current research associated with a new mechancial delinter being developed at the Cotton Production and Processing Research Unit in conjunction with Cotton Inc. A bench-top version of the new mechanical delinter was built and evaluated to determine operational speeds...

FutureTox III: Bridges for Translation

EPA Science Inventory

The present document describes key discussion points and outcomes of a Society of Toxicology (SOT) Contemporary Concepts in Toxicology (CCT) Workshop, entitled FutureTox III1,2 that was held in Crystal City, Virginia, November 19-20, 2015. The workshop built on the many lessons l...

Microbial Kinetic Model for the Degradation of Poorly Soluble Organic Materials

EPA Science Inventory

A novel mechanistic model is presented that describes the aerobic biodegradation kinetics of soybean biodiesel and petroleum diesel in batch experiments. The model was built on the assumptions that biodegradation takes place in the aqueous phase according to Monod kinetics, and ...

Problem-Solving Support for English Language Learners

ERIC Educational Resources Information Center

Wiest, Lynda R.

2008-01-01

Although word problems pose greater language demands, they also encourage more meaningful problem solving and mathematics understanding. With proper instructional support, a student-centered, investigative approach to contextualized problem solving benefits all students. This article presents a lesson built on an author-adapted version of the…

A new structure of superconducting magnetic system for 50 GHz operations (invited).

PubMed

Xie, D Z

2012-02-01

High field and high frequency have been leading the development of electron cyclotron resonance ion sources (ECRISs) in the past decade as demonstrated by the achieved great performance. The present superconducting magnet structures built with NbTi wires have reached an axial field of 3.5-4.0 T and a radial field of 2.0 T for operating frequency up to 28 GHz. Further increase of the magnetic field strength will require higher current superconductor, i.e., Nb(3)Sn wires. This paper will present the features of a new superconducting magnet structure and review of the existing structures. Using NbTi wires, the new magnet structure could be able to produce maximum fields of 7.0 T on axis and radial field of 3.7 T at a hexagonal plasma chamber wall for ECRIS operations up to 50 GHz. If this new magnet can be built with Nb(3)Sn wires, much higher fields can be expected.

Actuator with built-in viscous damping for isolation and structural control

NASA Astrophysics Data System (ADS)

Hyde, T. Tupper; Anderson, Eric H.

1994-05-01

This paper describes the development and experimental application of an actuator with built-in viscous damping. An existing passive damper was modified for use as a novel actuation device for isolation and structural control. The device functions by using the same fluid for viscous damping and as a hydraulic lever for a voice coil actuator. Applications for such an actuator include structural control and active isolation. Lumped parameter models capturing structural and fluid effects are presented. Component tests of free stroke, blocked force, and passive complex stiffness are used to update the assumed model parameters. The structural damping effectiveness of the new actuator is shown to be that of a regular D-strut passively and that of a piezoelectric strut with load cell feedback actively in a complex testbed structure. Open and closed loop results are presented for a force isolation application showing an 8 dB passive and 20 dB active improvement over an undamped mount. An optimized design for a future experimental testbed is developed.

Heterodyne Receiver for Laboratory Spectrosocpy of Molecules of Astrophysical Importance

NASA Astrophysics Data System (ADS)

Wehres, Nadine; Lewen, Frank; Endres, Christian; Hermanns, Marius; Schlemmer, Stephan

2016-06-01

We present first results of a heterodyne receiver built for high-resolution emission laboratory spectroscopy of molecules of astrophysical interest. The room-temperature receiver operates at frequencies between 80 and 110 GHz, consistent with ALMA band 3. Many molecules have been identified in the interstellar and circumstellar medium at exactly these frequencies by comparing emission spectra obtained from telescopes to high-resolution laboratory absorption spectra. Taking advantage of the recent progresses in the field of mm/submm technology in the astronomy community, we have built a room-temperature emission spectrometer making use of heterodyne receiver technology at an instantaneous bandwidth of currently 2.5 GHz. The system performance, in particular the noise temperature and systematic errors, is presented. The proof-of-concept is demonstrated by comparing the emission spectrum of methyl cyanide to respective absorption spectra and to the literature. Future prospects as well as limitations of the new laboratory receiver for the spectroscopy of complex organic molecules or transient species in discharges will be discussed.

OMPS Sensor Performance and Algorithm Description

NASA Astrophysics Data System (ADS)

Branham, M. S.; Farrow, S. V.; Novicki, M.; Bhaswar, S.; Baker, B.

2009-12-01

The Ozone Mapping and Profiler Suite (OMPS), built by Ball Aerospace, is the next-generation U.S. ozone monitoring sensor suite, designed and built for the National Polar-orbiting Operational Environmental Satellite System (NPOESS), under contract to the Integrated Program Office, administered by the Air Force, National Oceanic and Atmospheric Administration (NOAA), and National Aeronautics and Space Administration (NASA) under contract to Northrop Grumman. The first flight of an OMPS is scheduled for early 2011 on the NPOESS Preparatory Project (NPP) satellite. The OMPS sensor data will be used to generate the ozone calibrated sensor data and environmental data record (EDR) products. The final OMPS sensor performance and algorithms for NPP will be presented, now that the FM1 flight sensor suite has completed sell off and is integrated on the NPP spacecraft. Challenges requiring future development, and during intensive calibration/validation on orbit will be described. Also, an overview of the sensor suite, the FM1 measurement performance, and details of the retrieval algorithms will be provided in this presentation.

High Precision Isotopic Analysis of Actinide Bearing Materials: Performance of a New Generation of Purpose Built Actinide Multi-Collector ICPMS Instruments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eiden, Gregory C.; Duffin, Andrew M.; Liezers, Martin

2014-11-14

Recently, a new class of multi-collector inductively coupled plasma mass spectrometers (MC-ICPMS) has been introduced commercially that includes detector arrays purpose built for actinide measurements. These detector arrays significantly enhance the data quality possible for applications encountered in nuclear forensics. Two such instruments are described in this paper, the NeptunePlusTM, developed by Thermo-Fisher (Bremen, Germany), and the NuPlasma2, developed by Nu Instruments (Wrexham, UK). Research results are presented that have been obtained by the authors using the first commercial NeptunePlusTM. This paper also presents performance characteristics and results for traditional liquid introduction, including a means for ultra-trace detection via electrochemicalmore » separation prior to solution nebulization, as well as solid sample introduction with femtosecond-laser ablation. We also discuss the advantages and limitations of the current systems for detection of the transient signals associated with these two methods for introducing sample into the plasma.« less

Physical Activity Recognition with Mobile Phones: Challenges, Methods, and Applications

NASA Astrophysics Data System (ADS)

Yang, Jun; Lu, Hong; Liu, Zhigang; Boda, Péter Pál

In this book chapter, we present a novel system that recognizes and records the physical activity of a person using a mobile phone. The sensor data is collected by built-in accelerometer sensor that measures the motion intensity of the device. The system recognizes five everyday activities in real-time, i.e., stationary, walking, running, bicycling, and in vehicle. We first introduce the sensor's data format, sensor calibration, signal projection, feature extraction, and selection methods. Then we have a detailed discussion and comparison of different choices of feature sets and classifiers. The design and implementation of one prototype system is presented along with resource and performance benchmark on Nokia N95 platform. Results show high recognition accuracies for distinguishing the five activities. The last part of the chapter introduces one demo application built on top of our system, physical activity diary, and a selection of potential applications in mobile wellness, mobile social sharing and contextual user interface domains.

Orthogonal fluxgate mechanism operated with dc biased excitation

NASA Astrophysics Data System (ADS)

Sasada, I.

2002-05-01

A mode of operation is presented for an orthogonal fluxgate built with a thin magnetic wire. By adding a proper dc bias to the wire excitation, the new mode is easily established. In this case, the fundamental component of the induced voltage at the sensing coil (secondary voltage) is made sensitive to the axial magnetic field, compared to the second harmonic in a conventional orthogonal fluxgate. The operating principle is explained using a magnetization rotation model. A method is proposed to cancel the offset that is inevitable when the magnetic anisotropy is present in a magnetic wire at an angle to its circumference. Experimental results are shown for a sensor head consisting of a 2-cm-long Co-based amorphous wire 120 μm in diameter with a 220-turn sensing coil. The sensitivity obtained is higher than that obtained using a conventional type of the orthogonal fluxgate built with the same sensor head. It is also demonstrated that the proposed method for canceling the offset works well.

Modelling the propagation of smoke from a tanker fire in a built-up area.

PubMed

Brzozowska, Lucyna

2014-02-15

The paper presents the application of a Lagrangian particle model to problems connected with safety in road transport. Numerical simulations were performed for a hypothetical case of smoke emission from a tanker fire in a built-up area. Propagation of smoke was analysed for three wind directions. A diagnostic model was used to determine the air velocity field, whereas the dispersion of pollutants was analysed by means of a Lagrangian particle model (Brzozowska, 2013). The Idrisi Andes geographic information system was used to provide data on landforms and on their aerodynamic roughness. The presented results of computations and their analysis exemplify a possible application of the Lagrangian particle model: evaluation of mean (averaged over time) concentrations of pollutants and their distribution in the considered area (especially important due to the protection of people, animals and plants) and simulation of the propagation of harmful compounds in time as well as performing computations for cases of the potential effects of road incidents. Copyright © 2013 Elsevier B.V. All rights reserved.