Validation of the Information/Communications Technology Literacy Test
2016-10-01
nested set. Table 11 presents the results of incremental validity analyses for job knowledge/performance criteria by MOS. Figure 7 presents much...Systems Operator-Analyst (25B) and Nodal Network Systems Operator-Maintainer (25N) MOS. This report documents technical procedures and results of the...research effort. Results suggest that the ICTL test has potential as a valid and highly efficient predictor of valued outcomes in Signal school MOS. Not
Task Validation for the AN/TPQ-36 Radar System
1978-09-01
report presents the method and results of a study to validate personnel task descriptions for the new AN/TyP-Jb radar...TP.J-Sb KAPAK SVSTKM CONTENTS i ■ l.t |i- INTRODUCTION t METHOD 2 RESULTS, CONCLUSIONS, AND RECOMMENDATIONS b Task Validation 5 26B MOS... method , results, conclusions, and recommendations of the validation study. The appendixes contain the following: 1. Appendix A contains
Remarks on CFD validation: A Boeing Commercial Airplane Company perspective
NASA Technical Reports Server (NTRS)
Rubbert, Paul E.
1987-01-01
Requirements and meaning of validation of computational fluid dynamics codes are discussed. Topics covered include: validating a code, validating a user, and calibrating a code. All results are presented in viewgraph format.
Hypersonic Experimental and Computational Capability, Improvement and Validation. Volume 2
NASA Technical Reports Server (NTRS)
Muylaert, Jean (Editor); Kumar, Ajay (Editor); Dujarric, Christian (Editor)
1998-01-01
The results of the phase 2 effort conducted under AGARD Working Group 18 on Hypersonic Experimental and Computational Capability, Improvement and Validation are presented in this report. The first volume, published in May 1996, mainly focused on the design methodology, plans and some initial results of experiments that had been conducted to serve as validation benchmarks. The current volume presents the detailed experimental and computational data base developed during this effort.
ERIC Educational Resources Information Center
Borrello, Gloria M.; Thompson, Bruce
The calculation of second-order results in the validity assessment of measures and some useful interpretation aids are presented. First-order and second-order results give different and informative pictures of data dynamics. Several aspects of good practice in interpretation of second-order results are presented using data from 487 subjects…
Veggie and the VEG-01 Hardware Validation Test
NASA Technical Reports Server (NTRS)
Massa, Gioia; wheeler, Ray; Smith, Trent
2015-01-01
This presentation presents a brief overview of KSC plant science hardware for space and then details the Veggie hardware and the VEG-01 hardware validation test. The test results and future plans are discussed.
Earth Science Enterprise Scientific Data Purchase Project: Verification and Validation
NASA Technical Reports Server (NTRS)
Jenner, Jeff; Policelli, Fritz; Fletcher, Rosea; Holecamp, Kara; Owen, Carolyn; Nicholson, Lamar; Dartez, Deanna
2000-01-01
This paper presents viewgraphs on the Earth Science Enterprise Scientific Data Purchase Project's verification,and validation process. The topics include: 1) What is Verification and Validation? 2) Why Verification and Validation? 3) Background; 4) ESE Data Purchas Validation Process; 5) Data Validation System and Ingest Queue; 6) Shipment Verification; 7) Tracking and Metrics; 8) Validation of Contract Specifications; 9) Earth Watch Data Validation; 10) Validation of Vertical Accuracy; and 11) Results of Vertical Accuracy Assessment.
Results and current status of the NPARC alliance validation effort
NASA Technical Reports Server (NTRS)
Towne, Charles E.; Jones, Ralph R.
1996-01-01
The NPARC Alliance is a partnership between the NASA Lewis Research Center (LeRC) and the USAF Arnold Engineering Development Center (AEDC) dedicated to the establishment of a national CFD capability, centered on the NPARC Navier-Stokes computer program. The three main tasks of the Alliance are user support, code development, and validation. The present paper is a status report on the validation effort. It describes the validation approach being taken by the Alliance. Representative results are presented for laminar and turbulent flat plate boundary layers, a supersonic axisymmetric jet, and a glancing shock/turbulent boundary layer interaction. Cases scheduled to be run in the future are also listed. The archive of validation cases is described, including information on how to access it via the Internet.
NASA Technical Reports Server (NTRS)
Williams, Daniel M.
2006-01-01
Described is the research process that NASA researchers used to validate the Small Aircraft Transportation System (SATS) Higher Volume Operations (HVO) concept. The four phase building-block validation and verification process included multiple elements ranging from formal analysis of HVO procedures to flight test, to full-system architecture prototype that was successfully shown to the public at the June 2005 SATS Technical Demonstration in Danville, VA. Presented are significant results of each of the four research phases that extend early results presented at ICAS 2004. HVO study results have been incorporated into the development of the Next Generation Air Transportation System (NGATS) vision and offer a validated concept to provide a significant portion of the 3X capacity improvement sought after in the United States National Airspace System (NAS).
A verification library for multibody simulation software
NASA Technical Reports Server (NTRS)
Kim, Sung-Soo; Haug, Edward J.; Frisch, Harold P.
1989-01-01
A multibody dynamics verification library, that maintains and manages test and validation data is proposed, based on RRC Robot arm and CASE backhoe validation and a comparitive study of DADS, DISCOS, and CONTOPS that are existing public domain and commercial multibody dynamic simulation programs. Using simple representative problems, simulation results from each program are cross checked, and the validation results are presented. Functionalities of the verification library are defined, in order to automate validation procedure.
Testing Standard Reliability Criteria
ERIC Educational Resources Information Center
Sherry, David
2017-01-01
Maul's paper, "Rethinking Traditional Methods of Survey Validation" (Andrew Maul), contains two stages. First he presents empirical results that cast doubt on traditional methods for validating psychological measurement instruments. These results motivate the second stage, a critique of current conceptions of psychological measurement…
NASA Astrophysics Data System (ADS)
Dörr, Dominik; Joppich, Tobias; Schirmaier, Fabian; Mosthaf, Tobias; Kärger, Luise; Henning, Frank
2016-10-01
Thermoforming of continuously fiber reinforced thermoplastics (CFRTP) is ideally suited to thin walled and complex shaped products. By means of forming simulation, an initial validation of the producibility of a specific geometry, an optimization of the forming process and the prediction of fiber-reorientation due to forming is possible. Nevertheless, applied methods need to be validated. Therefor a method is presented, which enables the calculation of error measures for the mismatch between simulation results and experimental tests, based on measurements with a conventional coordinate measuring device. As a quantitative measure, describing the curvature is provided, the presented method is also suitable for numerical or experimental sensitivity studies on wrinkling behavior. The applied methods for forming simulation, implemented in Abaqus explicit, are presented and applied to a generic geometry. The same geometry is tested experimentally and simulation and test results are compared by the proposed validation method.
Validity of the MCAT in Predicting Performance in the First Two Years of Medical School.
ERIC Educational Resources Information Center
Jones, Robert F.; Thomae-Forgues, Maria
1984-01-01
The first systematic summary of predictive validity research on the new Medical College Admission Test (MCAT) is presented. The results show that MCAT scores have significant predictive validity with respect to first- and second-year medical school course grades. Further directions for MCAT validity research are described. (Author/MLW)
Piest, Benjamin A; Isberner, Maj-Britt; Richter, Tobias
2018-04-05
Previous research has shown that the validation of incoming information during language comprehension is a fast, efficient, and routine process (epistemic monitoring). Previous research on this topic has focused on epistemic monitoring during reading. The present study extended this research by investigating epistemic monitoring of audiovisual information. In a Stroop-like paradigm, participants (Experiment 1: adults; Experiment 2: 10-year-old children) responded to the probe words correct and false by keypress after the presentation of auditory assertions that could be either true or false with respect to concurrently presented pictures. Results provide evidence for routine validation of audiovisual information. Moreover, the results show a stronger and more stable interference effect for children compared with adults.
Validation of the Weight Concerns Scale Applied to Brazilian University Students.
Dias, Juliana Chioda Ribeiro; da Silva, Wanderson Roberto; Maroco, João; Campos, Juliana Alvares Duarte Bonini
2015-06-01
The aim of this study was to evaluate the validity and reliability of the Portuguese version of the Weight Concerns Scale (WCS) when applied to Brazilian university students. The scale was completed by 1084 university students from Brazilian public education institutions. A confirmatory factor analysis was conducted. The stability of the model in independent samples was assessed through multigroup analysis, and the invariance was estimated. Convergent, concurrent, divergent, and criterion validities as well as internal consistency were estimated. Results indicated that the one-factor model presented an adequate fit to the sample and values of convergent validity. The concurrent validity with the Body Shape Questionnaire and divergent validity with the Maslach Burnout Inventory for Students were adequate. Internal consistency was adequate, and the factorial structure was invariant in independent subsamples. The results present a simple and short instrument capable of precisely and accurately assessing concerns with weight among Brazilian university students. Copyright © 2015 Elsevier Ltd. All rights reserved.
Designing the Nuclear Energy Attitude Scale.
ERIC Educational Resources Information Center
Calhoun, Lawrence; And Others
1988-01-01
Presents a refined method for designing a valid and reliable Likert-type scale to test attitudes toward the generation of electricity from nuclear energy. Discusses various tests of validity that were used on the nuclear energy scale. Reports results of administration and concludes that the test is both reliable and valid. (CW)
The National SAT Validity Study: Sharing Results from Recent College Success Research
ERIC Educational Resources Information Center
Shaw, Emily J.; McKenzie, Elizabeth
2010-01-01
[Slides] presented at the annual conference of the Southern Association for College Admission Counseling, April 2010. This presentation summarizes recent research from the national SAT Validity Study and includes information on the Admitted Class Evaluation Service (ACES) system and how ACES can help institutions conduct their own validity…
NASA Technical Reports Server (NTRS)
Nemeth, Michael P.; Mikulas, Martin M., Jr.
2009-01-01
Simple formulas for the buckling stress of homogeneous, specially orthotropic, laminated-composite cylinders are presented. The formulas are obtained by using nondimensional parameters and equations that facilitate general validation, and are validated against the exact solution for a wide range of cylinder geometries and laminate constructions. Results are presented that establish the ranges of the nondimensional parameters and coefficients used. General results, given in terms of the nondimensional parameters, are presented that encompass a wide range of geometries and laminate constructions. These general results also illustrate a wide spectrum of behavioral trends. Design-oriented results are also presented that provide a simple, clear indication of laminate composition on critical stress, critical strain, and axial stiffness. An example is provided to demonstrate the application of these results to thin-walled column designs.
A statistical approach to selecting and confirming validation targets in -omics experiments
2012-01-01
Background Genomic technologies are, by their very nature, designed for hypothesis generation. In some cases, the hypotheses that are generated require that genome scientists confirm findings about specific genes or proteins. But one major advantage of high-throughput technology is that global genetic, genomic, transcriptomic, and proteomic behaviors can be observed. Manual confirmation of every statistically significant genomic result is prohibitively expensive. This has led researchers in genomics to adopt the strategy of confirming only a handful of the most statistically significant results, a small subset chosen for biological interest, or a small random subset. But there is no standard approach for selecting and quantitatively evaluating validation targets. Results Here we present a new statistical method and approach for statistically validating lists of significant results based on confirming only a small random sample. We apply our statistical method to show that the usual practice of confirming only the most statistically significant results does not statistically validate result lists. We analyze an extensively validated RNA-sequencing experiment to show that confirming a random subset can statistically validate entire lists of significant results. Finally, we analyze multiple publicly available microarray experiments to show that statistically validating random samples can both (i) provide evidence to confirm long gene lists and (ii) save thousands of dollars and hundreds of hours of labor over manual validation of each significant result. Conclusions For high-throughput -omics studies, statistical validation is a cost-effective and statistically valid approach to confirming lists of significant results. PMID:22738145
Jacob, Robin; Somers, Marie-Andree; Zhu, Pei; Bloom, Howard
2016-06-01
In this article, we examine whether a well-executed comparative interrupted time series (CITS) design can produce valid inferences about the effectiveness of a school-level intervention. This article also explores the trade-off between bias reduction and precision loss across different methods of selecting comparison groups for the CITS design and assesses whether choosing matched comparison schools based only on preintervention test scores is sufficient to produce internally valid impact estimates. We conduct a validation study of the CITS design based on the federal Reading First program as implemented in one state using results from a regression discontinuity design as a causal benchmark. Our results contribute to the growing base of evidence regarding the validity of nonexperimental designs. We demonstrate that the CITS design can, in our example, produce internally valid estimates of program impacts when multiple years of preintervention outcome data (test scores in the present case) are available and when a set of reasonable criteria are used to select comparison organizations (schools in the present case). © The Author(s) 2016.
Benchmark radar targets for the validation of computational electromagnetics programs
NASA Technical Reports Server (NTRS)
Woo, Alex C.; Wang, Helen T. G.; Schuh, Michael J.; Sanders, Michael L.
1993-01-01
Results are presented of a set of computational electromagnetics validation measurements referring to three-dimensional perfectly conducting smooth targets, performed for the Electromagnetic Code Consortium. Plots are presented for both the low- and high-frequency measurements of the NASA almond, an ogive, a double ogive, a cone-sphere, and a cone-sphere with a gap.
ERIC Educational Resources Information Center
Fernandez-Manzanal, Rosario; Rodriguez-Barreiro, Luis; Carrasquer, Jose
2007-01-01
Over the last few decades, environmental work has increased significantly. An important part of this has to do with attitudes. This research presents the design and validation of an environmental attitudes scale aimed at university students. Detailed information on development and validation of the scale is provided. Similarly, it presents the…
Vieira, Gisele de Lacerda Chaves; Pagano, Adriana Silvino; Reis, Ilka Afonso; Rodrigues, Júlia Santos Nunes; Torres, Heloísa de Carvalho
2018-01-01
ABSTRACT Objective: to perform the translation, adaptation and validation of the Diabetes Attitudes Scale - third version instrument into Brazilian Portuguese. Methods: methodological study carried out in six stages: initial translation, synthesis of the initial translation, back-translation, evaluation of the translated version by the Committee of Judges (27 Linguists and 29 health professionals), pre-test and validation. The pre-test and validation (test-retest) steps included 22 and 120 health professionals, respectively. The Content Validity Index, the analyses of internal consistency and reproducibility were performed using the R statistical program. Results: in the content validation, the instrument presented good acceptance among the Judges with a mean Content Validity Index of 0.94. The scale presented acceptable internal consistency (Cronbach’s alpha = 0.60), while the correlation of the total score at the test and retest moments was considered high (Polychoric Correlation Coefficient = 0.86). The Intra-class Correlation Coefficient, for the total score, presented a value of 0.65. Conclusion: the Brazilian version of the instrument (Escala de Atitudes dos Profissionais em relação ao Diabetes Mellitus) was considered valid and reliable for application by health professionals in Brazil. PMID:29319739
The effects of anxiety upon attention allocation to affective stimuli.
Waters, Allison M; Nitz, Ashley B; Craske, Michelle G; Johnson, Chris
2007-04-01
Pictures of emotionally aversive, neutral, and pleasant scenes were presented for 500 ms, followed by a probe presented in the same location (valid trials) or an alternate location (invalid trials) as the picture. Response-times to the probes were recorded in low (N=20) and high (N=27) trait anxious participants. Results revealed an overall negative cue validity effect of shorter reaction times (RTs) on invalid than valid trials, suggestive of an inhibition of return effect. Moreover, high trait anxious females showed a reduced negative cue validity effect for aversive pictures in comparison with neutral and pleasant pictures, suggestive of selective interference by the unpleasant material. By contrast, low trait anxious females showed an enhanced negative cue validity effect for aversive pictures relative to neutral and pleasant pictures, suggestive of attentional avoidance of the aversive content. The emotional content of picture cues did not significantly affect RTs in males, regardless of anxiety status. The results suggest that biased attention processes for aversive stimuli may contribute to the greater female propensity for anxiety disorders.
CFD Validation Experiment of a Mach 2.5 Axisymmetric Shock-Wave Boundary-Layer Interaction
NASA Technical Reports Server (NTRS)
Davis, David O.
2015-01-01
Preliminary results of an experimental investigation of a Mach 2.5 two-dimensional axisymmetric shock-wave/boundary-layer interaction (SWBLI) are presented. The purpose of the investigation is to create a SWBLI dataset specifically for CFD validation purposes. Presented herein are the details of the facility and preliminary measurements characterizing the facility and interaction region. The results will serve to define the region of interest where more detailed mean and turbulence measurements will be made.
CFD Validation Experiment of a Mach 2.5 Axisymmetric Shock-Wave/Boundary-Layer Interaction
NASA Technical Reports Server (NTRS)
Davis, David Owen
2015-01-01
Preliminary results of an experimental investigation of a Mach 2.5 two-dimensional axisymmetric shock-wave/ boundary-layer interaction (SWBLI) are presented. The purpose of the investigation is to create a SWBLI dataset specifically for CFD validation purposes. Presented herein are the details of the facility and preliminary measurements characterizing the facility and interaction region. These results will serve to define the region of interest where more detailed mean and turbulence measurements will be made.
Assessing Procedural Competence: Validity Considerations.
Pugh, Debra M; Wood, Timothy J; Boulet, John R
2015-10-01
Simulation-based medical education (SBME) offers opportunities for trainees to learn how to perform procedures and to be assessed in a safe environment. However, SBME research studies often lack robust evidence to support the validity of the interpretation of the results obtained from tools used to assess trainees' skills. The purpose of this paper is to describe how a validity framework can be applied when reporting and interpreting the results of a simulation-based assessment of skills related to performing procedures. The authors discuss various sources of validity evidence because they relate to SBME. A case study is presented.
ERIC Educational Resources Information Center
Huelsman, Timothy J.; Gagnon, Sandra Glover; Kidder-Ashley, Pamela; Griggs, Marissa Swaim
2014-01-01
Research Findings: Child temperament is an important construct, but its measurement has been marked by a number of weaknesses that have diminished the frequency with which it is assessed in practice. We address this problem by presenting the results of a quantitative construct validation study. We calculated validity indices by hypothesizing the…
Validation of the standardized and simplified cutting bill
Urs Buehlmann; D. Earl Kline; Janice K. Wiedenbeck; R., Jr. Noble
2008-01-01
This research validated the framework for the standardized and simplified cutting bill presented in an earlier paper. The cutting bill validation was carried out in two ways. First, all 20 of the cutting bill's part groups were examined to determine if significant yield influences resulted from changing specific part sizes within the boundaries of a given part...
ERIC Educational Resources Information Center
Anderson, Daniel; Lai, Cheng-Fei; Nese, Joseph F. T.; Park, Bitnara Jasmine; Saez, Leilani; Jamgochian, Elisa; Alonzo, Julie; Tindal, Gerald
2010-01-01
In the following technical report, we present evidence of the technical adequacy of the easyCBM[R] math measures in grades K-2. In addition to reliability information, we present criterion-related validity evidence, both concurrent and predictive, and construct validity evidence. The results represent data gathered throughout the 2009/2010 school…
Validity of the Brunel Mood Scale for use With Malaysian Athletes.
Lan, Mohamad Faizal; Lane, Andrew M; Roy, Jolly; Hanin, Nik Azma
2012-01-01
The aim of the present study was to investigate the factorial validity of the Brunel Mood Scale for use with Malaysian athletes. Athletes (N = 1485 athletes) competing at the Malaysian Games completed the Brunel of Mood Scale (BRUMS). Confirmatory Factor Analysis (CFA) results indicated a Confirmatory Fit Index (CFI) of .90 and Root Mean Squared Error of Approximation (RMSEA) was 0.05. The CFI was below the 0.95 criterion for acceptability and the RMSEA value was within the limits for acceptability suggested by Hu and Bentler, 1999. We suggest that results provide some support for validity of the BRUMS for use with Malaysian athletes. Given the large sample size used in the present study, descriptive statistics could be used as normative data for Malaysian athletes. Key pointsFindings from the present study lend support to the validity of the BRUMS for use with Malaysian athletes.Given the size of the sample used in the present study, we suggest descriptive data be used as the normative data for researchers using the scale with Malaysian athletes.It is suggested that future research investigate the effects of cultural differences on emotional states experienced by athletes before, during and post-competition.
Validity of the Brunel Mood Scale for use With Malaysian Athletes
Lan, Mohamad Faizal; Lane, Andrew M.; Roy, Jolly; Hanin, Nik Azma
2012-01-01
The aim of the present study was to investigate the factorial validity of the Brunel Mood Scale for use with Malaysian athletes. Athletes (N = 1485 athletes) competing at the Malaysian Games completed the Brunel of Mood Scale (BRUMS). Confirmatory Factor Analysis (CFA) results indicated a Confirmatory Fit Index (CFI) of .90 and Root Mean Squared Error of Approximation (RMSEA) was 0.05. The CFI was below the 0.95 criterion for acceptability and the RMSEA value was within the limits for acceptability suggested by Hu and Bentler, 1999. We suggest that results provide some support for validity of the BRUMS for use with Malaysian athletes. Given the large sample size used in the present study, descriptive statistics could be used as normative data for Malaysian athletes. Key points Findings from the present study lend support to the validity of the BRUMS for use with Malaysian athletes. Given the size of the sample used in the present study, we suggest descriptive data be used as the normative data for researchers using the scale with Malaysian athletes. It is suggested that future research investigate the effects of cultural differences on emotional states experienced by athletes before, during and post-competition. PMID:24149128
Validation of an automated mite counter for Dermanyssus gallinae in experimental laying hen cages.
Mul, Monique F; van Riel, Johan W; Meerburg, Bastiaan G; Dicke, Marcel; George, David R; Groot Koerkamp, Peter W G
2015-08-01
For integrated pest management (IPM) programs to be maximally effective, monitoring of the growth and decline of the pest populations is essential. Here, we present the validation results of a new automated monitoring device for the poultry red mite (Dermanyssus gallinae), a serious pest in laying hen facilities world-wide. This monitoring device (called an "automated mite counter") was validated in experimental laying hen cages with live birds and a growing population of D. gallinae. This validation study resulted in 17 data points of 'number of mites counted' by the automated mite counter and the 'number of mites present' in the experimental laying hen cages. The study demonstrated that the automated mite counter was able to track the D. gallinae population effectively. A wider evaluation showed that this automated mite counter can become a useful tool in IPM of D. gallinae in laying hen facilities.
Jakusz, J.W.; Dieck, J.J.; Langrehr, H.A.; Ruhser, J.J.; Lubinski, S.J.
2016-01-11
Similar to an AA, validation involves generating random points based on the total area for each map class. However, instead of collecting field data, two or three individuals not involved with the photo-interpretative mapping separately review each of the points onscreen and record a best-fit vegetation type(s) for each site. Once the individual analyses are complete, results are joined together and a comparative analysis is performed. The objective of this initial analysis is to identify areas where the validation results were in agreement (matches) and areas where validation results were in disagreement (mismatches). The two or three individuals then perform an analysis, looking at each mismatched site, and agree upon a final validation class. (If two vegetation types at a specific site appear to be equally prevalent, the validation team is permitted to assign the site two best-fit vegetation types.) Following the validation team’s comparative analysis of vegetation assignments, the data are entered into a database and compared to the mappers’ vegetation assignments. Agreements and disagreements between the map and validation classes are identified, and a contingency table is produced. This document presents the AA processes/results for Pools 13 and La Grange, as well as the validation process/results for Pools 13 and 26 and Open River South.
Towards Automatic Validation and Healing of Citygml Models for Geometric and Semantic Consistency
NASA Astrophysics Data System (ADS)
Alam, N.; Wagner, D.; Wewetzer, M.; von Falkenhausen, J.; Coors, V.; Pries, M.
2013-09-01
A steadily growing number of application fields for large 3D city models have emerged in recent years. Like in many other domains, data quality is recognized as a key factor for successful business. Quality management is mandatory in the production chain nowadays. Automated domain-specific tools are widely used for validation of business-critical data but still common standards defining correct geometric modeling are not precise enough to define a sound base for data validation of 3D city models. Although the workflow for 3D city models is well-established from data acquisition to processing, analysis and visualization, quality management is not yet a standard during this workflow. Processing data sets with unclear specification leads to erroneous results and application defects. We show that this problem persists even if data are standard compliant. Validation results of real-world city models are presented to demonstrate the potential of the approach. A tool to repair the errors detected during the validation process is under development; first results are presented and discussed. The goal is to heal defects of the models automatically and export a corrected CityGML model.
Verification and Validation Studies for the LAVA CFD Solver
NASA Technical Reports Server (NTRS)
Moini-Yekta, Shayan; Barad, Michael F; Sozer, Emre; Brehm, Christoph; Housman, Jeffrey A.; Kiris, Cetin C.
2013-01-01
The verification and validation of the Launch Ascent and Vehicle Aerodynamics (LAVA) computational fluid dynamics (CFD) solver is presented. A modern strategy for verification and validation is described incorporating verification tests, validation benchmarks, continuous integration and version control methods for automated testing in a collaborative development environment. The purpose of the approach is to integrate the verification and validation process into the development of the solver and improve productivity. This paper uses the Method of Manufactured Solutions (MMS) for the verification of 2D Euler equations, 3D Navier-Stokes equations as well as turbulence models. A method for systematic refinement of unstructured grids is also presented. Verification using inviscid vortex propagation and flow over a flat plate is highlighted. Simulation results using laminar and turbulent flow past a NACA 0012 airfoil and ONERA M6 wing are validated against experimental and numerical data.
Experimental Validation of a Thermoelastic Model for SMA Hybrid Composites
NASA Technical Reports Server (NTRS)
Turner, Travis L.
2001-01-01
This study presents results from experimental validation of a recently developed model for predicting the thermomechanical behavior of shape memory alloy hybrid composite (SMAHC) structures, composite structures with an embedded SMA constituent. The model captures the material nonlinearity of the material system with temperature and is capable of modeling constrained, restrained, or free recovery behavior from experimental measurement of fundamental engineering properties. A brief description of the model and analysis procedures is given, followed by an overview of a parallel effort to fabricate and characterize the material system of SMAHC specimens. Static and dynamic experimental configurations for the SMAHC specimens are described and experimental results for thermal post-buckling and random response are presented. Excellent agreement is achieved between the measured and predicted results, fully validating the theoretical model for constrained recovery behavior of SMAHC structures.
Freitas, Sandra; Prieto, Gerardo; Simões, Mário R; Nogueira, Joana; Santana, Isabel; Martins, Cristina; Alves, Lara
2018-05-03
The present study aims to analyze the psychometric characteristics of the TeLPI (Irregular Words Reading Test), a Portuguese premorbid intelligence test, using the Rasch model for dichotomous items. The results reveal an overall adequacy and a good fit of values regarding both items and persons. A high variability of cognitive performance level and a good quality of the measurements were also found. The TeLPI has proved to be a unidimensional measure with reduced DIF effects. The present findings contribute to overcome an important gap in the psychometric validity of this instrument and provide good evidence of the overall psychometric validity of TeLPI results.
Validation of NASA Thermal Ice Protection Computer Codes. Part 1; Program Overview
NASA Technical Reports Server (NTRS)
Miller, Dean; Bond, Thomas; Sheldon, David; Wright, William; Langhals, Tammy; Al-Khalil, Kamel; Broughton, Howard
1996-01-01
The Icing Technology Branch at NASA Lewis has been involved in an effort to validate two thermal ice protection codes developed at the NASA Lewis Research Center. LEWICE/Thermal (electrothermal deicing & anti-icing), and ANTICE (hot-gas & electrothermal anti-icing). The Thermal Code Validation effort was designated as a priority during a 1994 'peer review' of the NASA Lewis Icing program, and was implemented as a cooperative effort with industry. During April 1996, the first of a series of experimental validation tests was conducted in the NASA Lewis Icing Research Tunnel(IRT). The purpose of the April 96 test was to validate the electrothermal predictive capabilities of both LEWICE/Thermal, and ANTICE. A heavily instrumented test article was designed and fabricated for this test, with the capability of simulating electrothermal de-icing and anti-icing modes of operation. Thermal measurements were then obtained over a range of test conditions, for comparison with analytical predictions. This paper will present an overview of the test, including a detailed description of: (1) the validation process; (2) test article design; (3) test matrix development; and (4) test procedures. Selected experimental results will be presented for de-icing and anti-icing modes of operation. Finally, the status of the validation effort at this point will be summarized. Detailed comparisons between analytical predictions and experimental results are contained in the following two papers: 'Validation of NASA Thermal Ice Protection Computer Codes: Part 2- The Validation of LEWICE/Thermal' and 'Validation of NASA Thermal Ice Protection Computer Codes: Part 3-The Validation of ANTICE'
Mitchell, Travis D.; Urli, Kristina E.; Breitenbach, Jacques; Yelverton, Chris
2007-01-01
Abstract Objective This study aimed to evaluate the validity of the sacral base pressure test in diagnosing sacroiliac joint dysfunction. It also determined the predictive powers of the test in determining which type of sacroiliac joint dysfunction was present. Methods This was a double-blind experimental study with 62 participants. The results from the sacral base pressure test were compared against a cluster of previously validated tests of sacroiliac joint dysfunction to determine its validity and predictive powers. The external rotation of the feet, occurring during the sacral base pressure test, was measured using a digital inclinometer. Results There was no statistically significant difference in the results of the sacral base pressure test between the types of sacroiliac joint dysfunction. In terms of the results of validity, the sacral base pressure test was useful in identifying positive values of sacroiliac joint dysfunction. It was fairly helpful in correctly diagnosing patients with negative test results; however, it had only a “slight” agreement with the diagnosis for κ interpretation. Conclusions In this study, the sacral base pressure test was not a valid test for determining the presence of sacroiliac joint dysfunction or the type of dysfunction present. Further research comparing the agreement of the sacral base pressure test or other sacroiliac joint dysfunction tests with a criterion standard of diagnosis is necessary. PMID:19674694
Further Validation of a CFD Code for Calculating the Performance of Two-Stage Light Gas Guns
NASA Technical Reports Server (NTRS)
Bogdanoff, David W.
2017-01-01
Earlier validations of a higher-order Godunov code for modeling the performance of two-stage light gas guns are reviewed. These validation comparisons were made between code predictions and experimental data from the NASA Ames 1.5" and 0.28" guns and covered muzzle velocities of 6.5 to 7.2 km/s. In the present report, five more series of code validation comparisons involving experimental data from the Ames 0.22" (1.28" pump tube diameter), 0.28", 0.50", 1.00" and 1.50" guns are presented. The total muzzle velocity range of the validation data presented herein is 3 to 11.3 km/s. The agreement between the experimental data and CFD results is judged to be very good. Muzzle velocities were predicted within 0.35 km/s for 74% of the cases studied with maximum differences being 0.5 km/s and for 4 out of 50 cases, 0.5 - 0.7 km/s.
Adaptation and Validation of the Brazilian Version of the Hope Index
ERIC Educational Resources Information Center
Pacico, Juliana Cerentini; Zanon, Cristian; Bastianello, Micheline Roat; Reppold, Caroline Tozzi; Hutz, Claudio Simon
2013-01-01
The objective of this study was to adapt and gather validity evidence for a Brazilian sample version of the Hope Index and to verify if cultural differences would produce different results than those found in the United States. In this study, we present a set of analyses that together comprise a comprehensive validity argument for the use of a…
Cross-Validation of easyCBM Reading Cut Scores in Washington: 2009-2010. Technical Report #1109
ERIC Educational Resources Information Center
Irvin, P. Shawn; Park, Bitnara Jasmine; Anderson, Daniel; Alonzo, Julie; Tindal, Gerald
2011-01-01
This technical report presents results from a cross-validation study designed to identify optimal cut scores when using easyCBM[R] reading tests in Washington state. The cross-validation study analyzes data from the 2009-2010 academic year for easyCBM[R] reading measures. A sample of approximately 900 students per grade, randomly split into two…
Development of the Rational Behavior Inventory: Initial Validity and Reliability
ERIC Educational Resources Information Center
Shorkey, Clayton T.; Whiteman, Victor L.
1977-01-01
The results of initial validity and reliability studies on the Rational Behavior Inventory are presented. The instrument was developed to be used for assessment, treatment planning, and evaluation of clients by counselors who use Rational Emotive Therapy. (Author/JKS)
U.S. 75 Dallas, Texas, Model Validation and Calibration Report
DOT National Transportation Integrated Search
2010-02-01
This report presents the model validation and calibration results of the Integrated Corridor Management (ICM) analysis, modeling, and simulation (AMS) for the U.S. 75 Corridor in Dallas, Texas. The purpose of the project was to estimate the benefits ...
A Possible Tool for Checking Errors in the INAA Results, Based on Neutron Data and Method Validation
NASA Astrophysics Data System (ADS)
Cincu, Em.; Grigore, Ioana Manea; Barbos, D.; Cazan, I. L.; Manu, V.
2008-08-01
This work presents preliminary results of a new type of possible application in the INAA experiments of elemental analysis, useful to check errors occurred during investigation of unknown samples; it relies on the INAA method validation experiments and accuracy of the neutron data from the literature. The paper comprises 2 sections, the first one presents—in short—the steps of the experimental tests carried out for INAA method validation and for establishing the `ACTIVA-N' laboratory performance, which is-at the same time-an illustration of the laboratory evolution on the way to get performance. Section 2 presents our recent INAA results on CRMs, of which interpretation opens discussions about the usefulness of using a tool for checking possible errors, different from the usual statistical procedures. The questionable aspects and the requirements to develop a practical checking tool are discussed.
Supersonic, nonlinear, attached-flow wing design for high lift with experimental validation
NASA Technical Reports Server (NTRS)
Pittman, J. L.; Miller, D. S.; Mason, W. H.
1984-01-01
Results of the experimental validation are presented for the three dimensional cambered wing which was designed to achieve attached supercritical cross flow for lifting conditions typical of supersonic maneuver. The design point was a lift coefficient of 0.4 at Mach 1.62 and 12 deg angle of attack. Results from the nonlinear full potential method are presented to show the validity of the design process along with results from linear theory codes. Longitudinal force and moment data and static pressure data were obtained in the Langley Unitary Plan Wind Tunnel at Mach numbers of 1.58, 1.62, 1.66, 1.70, and 2.00 over an angle of attack range of 0 to 14 deg at a Reynolds number of 2.0 x 10 to the 6th power per foot. Oil flow photographs of the upper surface were obtained at M = 1.62 for alpha approx. = 8, 10, 12, and 14 deg.
Development and validation of the Stirling Eating Disorder Scales.
Williams, G J; Power, K G; Miller, H R; Freeman, C P; Yellowlees, A; Dowds, T; Walker, M; Parry-Jones, W L
1994-07-01
The development and reliability/validity check of an 80-item, 8-scale measure for use with eating disorder patients is presented. The Stirling Eating Disorder Scales (SEDS) assess anorexic dietary behavior, anorexic dietary cognitions, bulimic dietary behavior, bulimic dietary cognitions, high perceived external control, low assertiveness, low self-esteem, and self-directed hostility. The SEDS were administered to 82 eating disorder patients and 85 controls. Results indicate that the SEDS are acceptable in terms of internal consistency, reliability, group validity, and concurrent validity.
Cross-Validation of easyCBM Reading Cut Scores in Oregon: 2009-2010. Technical Report #1108
ERIC Educational Resources Information Center
Park, Bitnara Jasmine; Irvin, P. Shawn; Anderson, Daniel; Alonzo, Julie; Tindal, Gerald
2011-01-01
This technical report presents results from a cross-validation study designed to identify optimal cut scores when using easyCBM[R] reading tests in Oregon. The cross-validation study analyzes data from the 2009-2010 academic year for easyCBM[R] reading measures. A sample of approximately 2,000 students per grade, randomly split into two groups of…
Cognitive Bias in the Verification and Validation of Space Flight Systems
NASA Technical Reports Server (NTRS)
Larson, Steve
2012-01-01
Cognitive bias is generally recognized as playing a significant role in virtually all domains of human decision making. Insight into this role is informally built into many of the system engineering practices employed in the aerospace industry. The review process, for example, typically has features that help to counteract the effect of bias. This paper presents a discussion of how commonly recognized biases may affect the verification and validation process. Verifying and validating a system is arguably more challenging than development, both technically and cognitively. Whereas there may be a relatively limited number of options available for the design of a particular aspect of a system, there is a virtually unlimited number of potential verification scenarios that may be explored. The probability of any particular scenario occurring in operations is typically very difficult to estimate, which increases reliance on judgment that may be affected by bias. Implementing a verification activity often presents technical challenges that, if they can be overcome at all, often result in a departure from actual flight conditions (e.g., 1-g testing, simulation, time compression, artificial fault injection) that may raise additional questions about the meaningfulness of the results, and create opportunities for the introduction of additional biases. In addition to mitigating the biases it can introduce directly, the verification and validation process must also overcome the cumulative effect of biases introduced during all previous stages of development. A variety of cognitive biases will be described, with research results for illustration. A handful of case studies will be presented that show how cognitive bias may have affected the verification and validation process on recent JPL flight projects, identify areas of strength and weakness, and identify potential changes or additions to commonly used techniques that could provide a more robust verification and validation of future systems.
NASA Astrophysics Data System (ADS)
Dubrovsky, M.; Hirschi, M.; Spirig, C.
2014-12-01
To quantify impact of the climate change on a specific pest (or any weather-dependent process) in a specific site, we may use a site-calibrated pest (or other) model and compare its outputs obtained with site-specific weather data representing present vs. perturbed climates. The input weather data may be produced by the stochastic weather generator. Apart from the quality of the pest model, the reliability of the results obtained in such experiment depend on an ability of the generator to represent the statistical structure of the real world weather series, and on the sensitivity of the pest model to possible imperfections of the generator. This contribution deals with the multivariate HOWGH weather generator, which is based on a combination of parametric and non-parametric statistical methods. Here, HOWGH is used to generate synthetic hourly series of three weather variables (solar radiation, temperature and precipitation) required by a dynamic pest model SOPRA to simulate the development of codling moth. The contribution presents results of the direct and indirect validation of HOWGH. In the direct validation, the synthetic series generated by HOWGH (various settings of its underlying model are assumed) are validated in terms of multiple climatic characteristics, focusing on the subdaily wet/dry and hot/cold spells. In the indirect validation, we assess the generator in terms of characteristics derived from the outputs of SOPRA model fed by the observed vs. synthetic series. The weather generator may be used to produce weather series representing present and future climates. In the latter case, the parameters of the generator may be modified by the climate change scenarios based on Global or Regional Climate Models. To demonstrate this feature, the results of codling moth simulations for future climate will be shown. Acknowledgements: The weather generator is developed and validated within the frame of projects WG4VALUE (project LD12029 sponsored by the Ministry of Education, Youth and Sports of CR), and VALUE (COST ES 1102 action).
Adaptation and validation of the Diabetes Management Self-Efficacy Scale to Brazilian Portuguese 1
Pace, Ana Emilia; Gomes, Lilian Cristiane; Bertolin, Daniela Comelis; Loureiro, Helena Maria Almeira Macedo; Bijl, Jaap Van Der; Shortridge-Baggett, Lillie M.
2017-01-01
Objective: to perform the cultural adaptation and validation of the Diabetes Management Self-efficacy Scale for Patients with Type 2 Diabetes Mellitus with a Brazilian population sample. Method: cross-sectional methodological study in which the adaptation and validation process included the stages recommended in the literature. Construct validity and reliability were assessed with 200 adults with type 2 diabetes mellitus. Results: the items indicated by the panel of judges and by the target population were adjusted in the cultural adaptation to improve clarity and understanding. The instrument's four factors remained in the confirmatory factor analysis with factor loadings of items greater than 0.30, except for factor 4; convergent validity, verified by the multitrait-multimethod analysis, presented inter-item correlations from 0.37 to 0.92, while for discriminant validity, 100% of the items presented greater correlation in their own factors. Cronbach's coefficient alpha for the total scale was 0.78, ranging from 0.57 to 0.86 among factors. Conclusion: semantic, cultural, conceptual and idiomatic equivalences were achieved and the instrument's Brazilian version also presented psychometric properties that showed evidence of reliability and validity. Thus, it can be applied both in clinical practice and research. Self-efficacy is useful for planning and assessing educational interventions, as well as predicting behavior modification in self-care. PMID:28562700
Validation of FAST Model Sleep Estimates with Actigraph Measured Sleep in Locomotive Engineers
DOT National Transportation Integrated Search
2012-04-01
This report presents the results of a study to validate the AutoSleep sleep prediction algorithm, which is a component of the Fatigue Avoidance Scheduling Tool (FAST). Researchers collected work and sleep data from 41 locomotive engineers by using ac...
NASA Technical Reports Server (NTRS)
Ringermacher, H. I.; Moerner, W. E.; Miller, J. G.
1974-01-01
A two transducer correction formula valid for both solid and liquid specimens is presented. Using computer simulations of velocity measurements, the accuracy and range of validity of the results are discussed and are compared with previous approximations.
[Elaboration and validation of a tool to measure psychological well-being: WBMMS].
Massé, R; Poulin, C; Dassa, C; Lambert, J; Bélair, S; Battaglini, M A
1998-01-01
Psychological well-being scales used in epidemiologic surveys usually show high construct validity. The content validation, however, is less convincing since these scales rest on lists of items that reflect the theoretical model of the authors. In this study we present results of the construct and criterion validation of a new Well-Being Manifestations Measure Scale (WBMMS) founded on an initial list of manifestations derived from an original content validation in a general population. It is concluded that national and public health epidemiologic surveys should include both measures of positive and negative mental health.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jernigan, Dann A.; Blanchat, Thomas K.
It is necessary to improve understanding and develop temporally- and spatially-resolved integral scale validation data of the heat flux incident to a complex object in addition to measuring the thermal response of said object located within the fire plume for the validation of the SIERRA/FUEGO/SYRINX fire and SIERRA/CALORE codes. To meet this objective, a complex calorimeter with sufficient instrumentation to allow validation of the coupling between FUEGO/SYRINX/CALORE has been designed, fabricated, and tested in the Fire Laboratory for Accreditation of Models and Experiments (FLAME) facility. Validation experiments are specifically designed for direct comparison with the computational predictions. Making meaningful comparisonmore » between the computational and experimental results requires careful characterization and control of the experimental features or parameters used as inputs into the computational model. Validation experiments must be designed to capture the essential physical phenomena, including all relevant initial and boundary conditions. This report presents the data validation steps and processes, the results of the penlight radiant heat experiments (for the purpose of validating the CALORE heat transfer modeling of the complex calorimeter), and the results of the fire tests in FLAME.« less
Select Methodology for Validating Advanced Satellite Measurement Systems
NASA Technical Reports Server (NTRS)
Larar, Allen M.; Zhou, Daniel K.; Liu, Xi; Smith, William L.
2008-01-01
Advanced satellite sensors are tasked with improving global measurements of the Earth's atmosphere, clouds, and surface to enable enhancements in weather prediction, climate monitoring capability, and environmental change detection. Measurement system validation is crucial to achieving this goal and maximizing research and operational utility of resultant data. Field campaigns including satellite under-flights with well calibrated FTS sensors aboard high-altitude aircraft are an essential part of the validation task. This presentation focuses on an overview of validation methodology developed for assessment of high spectral resolution infrared systems, and includes results of preliminary studies performed to investigate the performance of the Infrared Atmospheric Sounding Interferometer (IASI) instrument aboard the MetOp-A satellite.
Robustness and Uncertainty: Applications for Policy in Climate and Hydrological Modeling
NASA Astrophysics Data System (ADS)
Fields, A. L., III
2015-12-01
Policymakers must often decide how to proceed when presented with conflicting simulation data from hydrological, climatological, and geological models. While laboratory sciences often appeal to the reproducibility of results to argue for the validity of their conclusions, simulations cannot use this strategy for a number of pragmatic and methodological reasons. However, robustness of predictions and causal structures can serve the same function for simulations as reproducibility does for laboratory experiments and field observations in either adjudicating between conflicting results or showing that there is insufficient justification to externally validate the results. Additionally, an interpretation of the argument from robustness is presented that involves appealing to the convergence of many well-built and diverse models rather than the more common version which involves appealing to the probability that one of a set of models is likely to be true. This interpretation strengthens the case for taking robustness as an additional requirement for the validation of simulation results and ultimately supports the idea that computer simulations can provide information about the world that is just as trustworthy as data from more traditional laboratory studies and field observations. Understanding the importance of robust results for the validation of simulation data is especially important for policymakers making decisions on the basis of potentially conflicting models. Applications will span climate, hydrological, and hydroclimatological models.
NASA Technical Reports Server (NTRS)
Butler, James J.; Johnson, B. Carol; Rice, Joseph P.; Brown, Steven W.; Barnes, Robert A.
2007-01-01
Historically, the traceability of the laboratory calibration of Earth-observing satellite instruments to a primary radiometric reference scale (SI units) is the responsibility of each instrument builder. For the NASA Earth Observing System (EOS), a program has been developed using laboratory transfer radiometers, each with its own traceability to the primary radiance scale of a national metrology laboratory, to independently validate the radiances assigned to the laboratory sources of the instrument builders. The EOS Project Science Office also developed a validation program for the measurement of onboard diffuse reflecting plaques, which are also used as radiometric standards for Earth-observing satellite instruments. Summarized results of these validation campaigns, with an emphasis on the current state-of-the-art uncertainties in laboratory radiometric standards, will be presented. Future mission uncertainty requirements, and possible enhancements to the EOS validation program to ensure that those uncertainties can be met, will be presented.
Validity and validation of expert (Q)SAR systems.
Hulzebos, E; Sijm, D; Traas, T; Posthumus, R; Maslankiewicz, L
2005-08-01
At a recent workshop in Setubal (Portugal) principles were drafted to assess the suitability of (quantitative) structure-activity relationships ((Q)SARs) for assessing the hazards and risks of chemicals. In the present study we applied some of the Setubal principles to test the validity of three (Q)SAR expert systems and validate the results. These principles include a mechanistic basis, the availability of a training set and validation. ECOSAR, BIOWIN and DEREK for Windows have a mechanistic or empirical basis. ECOSAR has a training set for each QSAR. For half of the structural fragments the number of chemicals in the training set is >4. Based on structural fragments and log Kow, ECOSAR uses linear regression to predict ecotoxicity. Validating ECOSAR for three 'valid' classes results in predictivity of > or = 64%. BIOWIN uses (non-)linear regressions to predict the probability of biodegradability based on fragments and molecular weight. It has a large training set and predicts non-ready biodegradability well. DEREK for Windows predictions are supported by a mechanistic rationale and literature references. The structural alerts in this program have been developed with a training set of positive and negative toxicity data. However, to support the prediction only a limited number of chemicals in the training set is presented to the user. DEREK for Windows predicts effects by 'if-then' reasoning. The program predicts best for mutagenicity and carcinogenicity. Each structural fragment in ECOSAR and DEREK for Windows needs to be evaluated and validated separately.
Maïano, Christophe; Bégarie, Jérôme; Morin, Alexandre J S; Garbarino, Jean-Marie; Ninot, Grégory
2010-01-01
The purpose of this study was to test the reliability (i.e. internal consistency and test-retest reliability) and construct validity (i.e. content validity, factor validity, measurement invariance, and latent mean invariance) of the Nutrition and Activity Knowledge Scale (NAKS) in a sample of French adolescents with mild to moderate Intellectual Disability (ID). A total sample of 260 adolescents (144 boys and 116 girls), aged between 12 and 18 years old, with mild to moderate ID was involved in two studies. In the first study, analysis of items' content reveals that many words from the original version were not understood or induced confusion. These items were reworded and simplified while retaining their original meaning. In the second study, results provided support for: (i) the factor validity and reliability of a 15-item French version of the NAKS; (ii) the measurement invariance of the resulting NAKS across genders and ID levels; (iii) the partial measurement invariance of the resulting NAKS across age groups and type of school placement. In addition, the latent means of the 15-item French version of the NAKS proved to be invariant across gender, age categories, and ID levels, but to vary across type of school placement (with adolescents schooled in self-contained classes from regular schools presenting higher levels of NAK than adolescents placed in specialized establishments). The present results thus provide preliminary evidence regarding the construct validity of a 15-item French version of the NAKS in a sample of adolescents with ID.
Geometric Calibration and Validation of Ultracam Aerial Sensors
NASA Astrophysics Data System (ADS)
Gruber, Michael; Schachinger, Bernhard; Muick, Marc; Neuner, Christian; Tschemmernegg, Helfried
2016-03-01
We present details of the calibration and validation procedure of UltraCam Aerial Camera systems. Results from the laboratory calibration and from validation flights are presented for both, the large format nadir cameras and the oblique cameras as well. Thus in this contribution we show results from the UltraCam Eagle and the UltraCam Falcon, both nadir mapping cameras, and the UltraCam Osprey, our oblique camera system. This sensor offers a mapping grade nadir component together with the four oblique camera heads. The geometric processing after the flight mission is being covered by the UltraMap software product. Thus we present details about the workflow as well. The first part consists of the initial post-processing which combines image information as well as camera parameters derived from the laboratory calibration. The second part, the traditional automated aerial triangulation (AAT) is the step from single images to blocks and enables an additional optimization process. We also present some special features of our software, which are designed to better support the operator to analyze large blocks of aerial images and to judge the quality of the photogrammetric set-up.
Research Measures for Dyscalculia: A Validity and Reliability Study.
ERIC Educational Resources Information Center
Geiman, R. M.
1986-01-01
This study sought to evaluate a measure of dyscalculia to determine its validity and reliability. It also tested use of the instrument with seventh graders and ascertained where errors attributed to dyscalculia were also present in an average sample of seventh graders. Results varied. (MNS)
Testing Reading Comprehension of Theoretical Discourse with Cloze.
ERIC Educational Resources Information Center
Greene, Benjamin B., Jr.
2001-01-01
Presents evidence from a large sample of reading test scores for the validity of cloze-based assessments of reading comprehension for the discourse typically encountered in introductory college economics textbooks. Notes that results provide strong evidence that appropriately designed cloze tests permit valid assessments of reading comprehension…
DOT National Transportation Integrated Search
2008-06-30
The following Independent Verification and Validation (IV&V) report documents and presents the results of a study of the Washington State Ferries Prototype Wireless High Speed Data Network. The purpose of the study was to evaluate and determine if re...
Rönspies, Jelena; Schmidt, Alexander F; Melnikova, Anna; Krumova, Rosina; Zolfagari, Asadeh; Banse, Rainer
2015-07-01
The present study was conducted to validate an adaptation of the Implicit Relational Assessment Procedure (IRAP) as an indirect latency-based measure of sexual orientation. Furthermore, reliability and criterion validity of the IRAP were compared to two established indirect measures of sexual orientation: a Choice Reaction Time task (CRT) and a Viewing Time (VT) task. A sample of 87 heterosexual and 35 gay men completed all three indirect measures in an online study. The IRAP and the VT predicted sexual orientation nearly perfectly. Both measures also showed a considerable amount of convergent validity. Reliabilities (internal consistencies) reached satisfactory levels. In contrast, the CRT did not tap into sexual orientation in the present study. In sum, the VT measure performed best, with the IRAP showing only slightly lower reliability and criterion validity, whereas the CRT did not yield any evidence of reliability or criterion validity in the present research. The results were discussed in the light of specific task properties of the indirect latency-based measures (task-relevance vs. task-irrelevance).
Loop Evolution Observed with AIA and Hi-C
NASA Technical Reports Server (NTRS)
Mulu-Moore, Fana; Winebarger, Amy R.; Cirtain, Jonathan W.; Kobayashi, Ken; Korreck, Kelly E.; Golub, Leon; Kuzin, Sergei; Walsh, Robert William; DeForest, Craig E.; De Pontieu, Bart;
2012-01-01
In the past decade, the evolution of EUV loops has been used to infer the loop substructure. With the recent launch of High Resolution Coronal Imager (Hi-C), this inference can be validated. In this presentation we discuss the first results of loop analysis comparing AIA and Hi-C data. In the past decade, the evolution of EUV loops has been used to infer the loop substructure. With the recent launch of High Resolution Coronal Imager (Hi-C), this inference can be validated. In this presentation we discuss the first results of loop analysis comparing AIA and Hi-C data.
[The scale of social provisions: their validation in Quebec].
Caron, J
1996-01-01
This article presents the results of the Quebec validation of the Social Provisions Scale (Cutrona et Russell, 1989). L'échelle de provision sociales was administered to 790 people on the course of two studies. The first one included 387 university students of first level and the second was realized with 266 people from the general population, 79 welfare recipients and 58 persons with a diagnosis related to psychosis. The results show that the scale presents a good internal coherence and a satisfying temporal stability, thus assuring the fidelity of the instrument. The factorial analyses have not reproduced exactly the same profile as the original instrument, however the moderate correlations between the different social provisions sustain the validity of the multidimensional construct of social support. Moreover, analyses of the variance and the discriminating analysis allow to acknowledge that the sub-scales have a high discriminating power; they allow to distinguish the general population from welfare recipients and people suffering from psychosis. Finally, norms are presented for the general population.
Simulation verification techniques study. Subsystem simulation validation techniques
NASA Technical Reports Server (NTRS)
Duncan, L. M.; Reddell, J. P.; Schoonmaker, P. B.
1974-01-01
Techniques for validation of software modules which simulate spacecraft onboard systems are discussed. An overview of the simulation software hierarchy for a shuttle mission simulator is provided. A set of guidelines for the identification of subsystem/module performance parameters and critical performance parameters are presented. Various sources of reference data to serve as standards of performance for simulation validation are identified. Environment, crew station, vehicle configuration, and vehicle dynamics simulation software are briefly discussed from the point of view of their interfaces with subsystem simulation modules. A detailed presentation of results in the area of vehicle subsystems simulation modules is included. A list of references, conclusions and recommendations are also given.
Positron annihilation processes update
NASA Technical Reports Server (NTRS)
Guessoum, Nidhal; Skibo, Jeffrey G.; Ramaty, Reuven
1997-01-01
The present knowledge concerning the positron annihilation processes is reviewed, with emphasis on the data of the cross sections of the various processes of interest in astrophysical applications. Recent results are presented including results on reaction rates and line widths, the validity of which is verified.
VALFAST: Secure Probabilistic Validation of Hundreds of Kepler Planet Candidates
NASA Astrophysics Data System (ADS)
Morton, Tim; Petigura, E.; Johnson, J. A.; Howard, A.; Marcy, G. W.; Baranec, C.; Law, N. M.; Riddle, R. L.; Ciardi, D. R.; Robo-AO Team
2014-01-01
The scope, scale, and tremendous success of the Kepler mission has necessitated the rapid development of probabilistic validation as a new conceptual framework for analyzing transiting planet candidate signals. While several planet validation methods have been independently developed and presented in the literature, none has yet come close to addressing the entire Kepler survey. I present the results of applying VALFAST---a planet validation code based on the methodology described in Morton (2012)---to every Kepler Object of Interest. VALFAST is unique in its combination of detail, completeness, and speed. Using the transit light curve shape, realistic population simulations, and (optionally) diverse follow-up observations, it calculates the probability that a transit candidate signal is the result of a true transiting planet or any of a number of astrophysical false positive scenarios, all in just a few minutes on a laptop computer. In addition to efficiently validating the planetary nature of hundreds of new KOIs, this broad application of VALFAST also demonstrates its ability to reliably identify likely false positives. This extensive validation effort is also the first to incorporate data from all of the largest Kepler follow-up observing efforts: the CKS survey of ~1000 KOIs with Keck/HIRES, the Robo-AO survey of >1700 KOIs, and high-resolution images obtained through the Kepler Follow-up Observing Program. In addition to enabling the core science that the Kepler mission was designed for, this methodology will be critical to obtain statistical results from future surveys such as TESS and PLATO.
Braido, Fulvio; Santus, Pierachille; Corsico, Angelo Guido; Di Marco, Fabiano; Melioli, Giovanni; Scichilone, Nicola; Solidoro, Paolo
2018-01-01
The purposes of this study were development and validation of an expert system (ES) aimed at supporting the diagnosis of chronic obstructive lung disease (COLD). A questionnaire and a WebFlex code were developed and validated in silico. An expert panel pilot validation on 60 cases and a clinical validation on 241 cases were performed. The developed questionnaire and code validated in silico resulted in a suitable tool to support the medical diagnosis. The clinical validation of the ES was performed in an academic setting that included six different reference centers for respiratory diseases. The results of the ES expressed as a score associated with the risk of suffering from COLD were matched and compared with the final clinical diagnoses. A set of 60 patients were evaluated by a pilot expert panel validation with the aim of calculating the sample size for the clinical validation study. The concordance analysis between these preliminary ES scores and diagnoses performed by the experts indicated that the accuracy was 94.7% when both experts and the system confirmed the COLD diagnosis and 86.3% when COLD was excluded. Based on these results, the sample size of the validation set was established in 240 patients. The clinical validation, performed on 241 patients, resulted in ES accuracy of 97.5%, with confirmed COLD diagnosis in 53.6% of the cases and excluded COLD diagnosis in 32% of the cases. In 11.2% of cases, a diagnosis of COLD was made by the experts, although the imaging results showed a potential concomitant disorder. The ES presented here (COLD ES ) is a safe and robust supporting tool for COLD diagnosis in primary care settings.
Establishing Validity of the Thai Mathematics Teaching Efficacy Beliefs Instrument
ERIC Educational Resources Information Center
Matney, Gabriel; Jackson, Jack L., II.; Panarach, Yupadee
2016-01-01
This article presents our work in translating the Mathematics Teaching Efficacy Beliefs Instrument (MTEBI) from English to Thai and our resulting investigation of validity with Thai preservice teachers. The translation process occurred over several meetings between two U.S. mathematics educators and one Thai mathematics educator. To check for…
NASA Astrophysics Data System (ADS)
Nelson, B. A.; Akcay, C.; Glasser, A. H.; Hansen, C. J.; Jarboe, T. R.; Marklin, G. J.; Milroy, R. D.; Morgan, K. D.; Norgaard, P. C.; Shumlak, U.; Sutherland, D. A.; Victor, B. S.; Sovinec, C. R.; O'Bryan, J. B.; Held, E. D.; Ji, J.-Y.; Lukin, V. S.
2014-10-01
The Plasma Science and Innovation Center (PSI-Center - http://www.psicenter.org) supports collaborating validation platform experiments with 3D extended MHD simulations using the NIMROD, HiFi, and PSI-TET codes. Collaborators include the Bellan Plasma Group (Caltech), CTH (Auburn U), HBT-EP (Columbia), HIT-SI (U Wash-UW), LTX (PPPL), MAST (Culham), Pegasus (U Wisc-Madison), SSX (Swarthmore College), TCSU (UW), and ZaP/ZaP-HD (UW). The PSI-Center is exploring application of validation metrics between experimental data and simulations results. Biorthogonal decomposition (BOD) is used to compare experiments with simulations. BOD separates data sets into spatial and temporal structures, giving greater weight to dominant structures. Several BOD metrics are being formulated with the goal of quantitive validation. Results from these simulation and validation studies, as well as an overview of the PSI-Center status will be presented.
Lohrer, H; Nauck, T
2010-06-01
The VISA-A questionnaire is currently the only valid, reliable, and disease specific patient administered questionnaire for research in Achilles tendinopathy. To perform multinational and multilingual investigations this instrument was already adapted to several languages. According to the "guidelines for the process of cross-cultural adaptation of self-report measures" we already translated and validated the VISA-A questionnaire for patients with Achilles tendinopathy. To cross-culturally adapt and validate the VISA-A Questionnaire for German-speaking patients suffering from Haglund's disease. The VISA-A-G questionnaire was tested for reliability, validity, and internal consistency in 39 Haglund's disease patients and 79 asymptomatic persons. For concurrent validity the VISA-A-G was compared with the Curwin and Stanish tendon grading system and with the Percy and Conochie classification system for the effect of pain on athletic performance. VISA-A-G results in Haglund's disease were additionally compared with VISA-A-G results obtained from Achilles tendinopathy patients and with VISA-A results presented in the international literature. ICC for the VISA-A-G questionnaire in conservatively treated Haglund's disease patients was 0.96. In asymptomatic students and joggers ICC was 0.97 and 0.60. When correlated with the grading system of Curwin and Stanish and with the Percy and Conochie classification rho was -0.95 and 0.94, respectively. Internal consistency (Cronbach's alpha) for the total VISA-A-G scores of the patients was calculated to be 0.87. Compared with VISA-A-G results obtained from Achilles tendinopathy patients there was no relevant difference discernible. Compared with VISA-A results presented in the original publication no difference was found statistically for students, healthy people, conservative, and preoperative patients, respectively. This study confirms that the VISA-A-G is a valid and reliable measure for German-speaking patients suffering from Haglund's disease. Georg Thieme Verlag KG Stuttgart, New York.
Turbine Engine Mathematical Model Validation
1976-12-01
AEDC-TR-76-90 ~Ec i ? Z985 TURBINE ENGINE MATHEMATICAL MODEL VALIDATION ENGINE TEST FACILITY ARNOLD ENGINEERING DEVELOPMENT CENTER AIR FORCE...i f n e c e s e a ~ ~ d i den t i f y by b l ock number) YJI01-GE-100 engine turbine engines mathematical models computations mathematical...report presents and discusses the results of an investigation to develop a rationale and technique for the validation of turbine engine steady-state
NASA Astrophysics Data System (ADS)
Glocer, A.; Rastätter, L.; Kuznetsova, M.; Pulkkinen, A.; Singer, H. J.; Balch, C.; Weimer, D.; Welling, D.; Wiltberger, M.; Raeder, J.; Weigel, R. S.; McCollough, J.; Wing, S.
2016-07-01
We present the latest result of a community-wide space weather model validation effort coordinated among the Community Coordinated Modeling Center (CCMC), NOAA Space Weather Prediction Center (SWPC), model developers, and the broader science community. Validation of geospace models is a critical activity for both building confidence in the science results produced by the models and in assessing the suitability of the models for transition to operations. Indeed, a primary motivation of this work is supporting NOAA/SWPC's effort to select a model or models to be transitioned into operations. Our validation efforts focus on the ability of the models to reproduce a regional index of geomagnetic disturbance, the local K-index. Our analysis includes six events representing a range of geomagnetic activity conditions and six geomagnetic observatories representing midlatitude and high-latitude locations. Contingency tables, skill scores, and distribution metrics are used for the quantitative analysis of model performance. We consider model performance on an event-by-event basis, aggregated over events, at specific station locations, and separated into high-latitude and midlatitude domains. A summary of results is presented in this report, and an online tool for detailed analysis is available at the CCMC.
NASA Technical Reports Server (NTRS)
Glocer, A.; Rastaetter, L.; Kuznetsova, M.; Pulkkinen, A.; Singer, H. J.; Balch, C.; Weimer, D.; Welling, D.; Wiltberger, M.; Raeder, J.;
2016-01-01
We present the latest result of a community-wide space weather model validation effort coordinated among the Community Coordinated Modeling Center (CCMC), NOAA Space Weather Prediction Center (SWPC), model developers, and the broader science community. Validation of geospace models is a critical activity for both building confidence in the science results produced by the models and in assessing the suitability of the models for transition to operations. Indeed, a primary motivation of this work is supporting NOAA/SWPCs effort to select a model or models to be transitioned into operations. Our validation efforts focus on the ability of the models to reproduce a regional index of geomagnetic disturbance, the local K-index. Our analysis includes six events representing a range of geomagnetic activity conditions and six geomagnetic observatories representing midlatitude and high-latitude locations. Contingency tables, skill scores, and distribution metrics are used for the quantitative analysis of model performance. We consider model performance on an event-by-event basis, aggregated over events, at specific station locations, and separated into high-latitude and midlatitude domains. A summary of results is presented in this report, and an online tool for detailed analysis is available at the CCMC.
Pretest information for a test to validate plume simulation procedures (FA-17)
NASA Technical Reports Server (NTRS)
Hair, L. M.
1978-01-01
The results of an effort to plan a final verification wind tunnel test to validate the recommended correlation parameters and application techniques were presented. The test planning effort was complete except for test site finalization and the associated coordination. Two suitable test sites were identified. Desired test conditions were shown. Subsequent sections of this report present the selected model and test site, instrumentation of this model, planned test operations, and some concluding remarks.
DBS-LC-MS/MS assay for caffeine: validation and neonatal application.
Bruschettini, Matteo; Barco, Sebastiano; Romantsik, Olga; Risso, Francesco; Gennai, Iulian; Chinea, Benito; Ramenghi, Luca A; Tripodi, Gino; Cangemi, Giuliana
2016-09-01
DBS might be an appropriate microsampling technique for therapeutic drug monitoring of caffeine in infants. Nevertheless, its application presents several issues that still limit its use. This paper describes a validated DBS-LC-MS/MS method for caffeine. The results of the method validation showed an hematocrit dependence. In the analysis of 96 paired plasma and DBS clinical samples, caffeine levels measured in DBS were statistically significantly lower than in plasma but the observed differences were independent from hematocrit. These results clearly showed the need for extensive validation with real-life samples for DBS-based methods. DBS-LC-MS/MS can be considered to be a good alternative to traditional methods for therapeutic drug monitoring or PK studies in preterm infants.
Designing Interactive Electronic Module in Chemistry Lessons
NASA Astrophysics Data System (ADS)
Irwansyah, F. S.; Lubab, I.; Farida, I.; Ramdhani, M. A.
2017-09-01
This research aims to design electronic module (e-module) oriented to the development of students’ chemical literacy on the solution colligative properties material. This research undergoes some stages including concept analysis, discourse analysis, storyboard design, design development, product packaging, validation, and feasibility test. Overall, this research undertakes three main stages, namely, Define (in the form of preliminary studies); Design (designing e-module); Develop (including validation and model trial). The concept presentation and visualization used in this e-module is oriented to chemical literacy skills. The presentation order carries aspects of scientific context, process, content, and attitude. Chemists and multi media experts have done the validation to test the initial quality of the products and give a feedback for the product improvement. The feasibility test results stated that the content presentation and display are valid and feasible to be used with the value of 85.77% and 87.94%. These values indicate that this e-module oriented to students’ chemical literacy skills for the solution colligative properties material is feasible to be used.
NASA Astrophysics Data System (ADS)
Singh, Sarabjeet; Howard, Carl Q.; Hansen, Colin H.; Köpke, Uwe G.
2018-03-01
In this paper, numerically modelled vibration response of a rolling element bearing with a localised outer raceway line spall is presented. The results were obtained from a finite element (FE) model of the defective bearing solved using an explicit dynamics FE software package, LS-DYNA. Time domain vibration signals of the bearing obtained directly from the FE modelling were processed further to estimate time-frequency and frequency domain results, such as spectrogram and power spectrum, using standard signal processing techniques pertinent to the vibration-based monitoring of rolling element bearings. A logical approach to analyses of the numerically modelled results was developed with an aim to presenting the analytical validation of the modelled results. While the time and frequency domain analyses of the results show that the FE model generates accurate bearing kinematics and defect frequencies, the time-frequency analysis highlights the simulation of distinct low- and high-frequency characteristic vibration signals associated with the unloading and reloading of the rolling elements as they move in and out of the defect, respectively. Favourable agreement of the numerical and analytical results demonstrates the validation of the results from the explicit FE modelling of the bearing.
Verification and Validation of the General Mission Analysis Tool (GMAT)
NASA Technical Reports Server (NTRS)
Hughes, Steven P.; Qureshi, Rizwan H.; Cooley, D. Steven; Parker, Joel J. K.; Grubb, Thomas G.
2014-01-01
This paper describes the processes and results of Verification and Validation (V&V) efforts for the General Mission Analysis Tool (GMAT). We describe the test program and environments, the tools used for independent test data, and comparison results. The V&V effort produced approximately 13,000 test scripts that are run as part of the nightly buildtest process. In addition, we created approximately 3000 automated GUI tests that are run every two weeks. Presenting all test results are beyond the scope of a single paper. Here we present high-level test results in most areas, and detailed test results for key areas. The final product of the V&V effort presented in this paper was GMAT version R2013a, the first Gold release of the software with completely updated documentation and greatly improved quality. Release R2013a was the staging release for flight qualification performed at Goddard Space Flight Center (GSFC) ultimately resulting in GMAT version R2013b.
URANS simulations of the tip-leakage cavitating flow with verification and validation procedures
NASA Astrophysics Data System (ADS)
Cheng, Huai-yu; Long, Xin-ping; Liang, Yun-zhi; Long, Yun; Ji, Bin
2018-04-01
In the present paper, the Vortex Identified Zwart-Gerber-Belamri (VIZGB) cavitation model coupled with the SST-CC turbulence model is used to investigate the unsteady tip-leakage cavitating flow induced by a NACA0009 hydrofoil. A qualitative comparison between the numerical and experimental results is made. In order to quantitatively evaluate the reliability of the numerical data, the verification and validation (V&V) procedures are used in the present paper. Errors of numerical results are estimated with seven error estimators based on the Richardson extrapolation method. It is shown that though a strict validation cannot be achieved, a reasonable prediction of the gross characteristics of the tip-leakage cavitating flow can be obtained. Based on the numerical results, the influence of the cavitation on the tip-leakage vortex (TLV) is discussed, which indicates that the cavitation accelerates the fusion of the TLV and the tip-separation vortex (TSV). Moreover, the trajectory of the TLV, when the cavitation occurs, is close to the side wall.
Aerosol profiling during the large scale field campaign CINDI-2
NASA Astrophysics Data System (ADS)
Apituley, Arnoud; Roozendael, Michel Van; Richter, Andreas; Wagner, Thomas; Friess, Udo; Hendrick, Francois; Kreher, Karin; Tirpitz, Jan-Lukas
2018-04-01
For the validation of space borne observations of NO2 and other trace gases from hyperspectral imagers, ground based instruments based on the MAXDOAS technique are an excellent choice, since they rely on similar retrieval techniques as the observations from orbit. To ensure proper traceability of the MAXDOAS observations, a thorough validation and intercomparison is mandatory. Advanced MAXDOAS observation and retrieval techniques enable inferring vertical structure of trace gases and aerosols. These techniques and their results need validation by e.g. lidar techniques. For the proper understanding of the results from passive remote sensing techniques, independent observations are needed that include parameters needed to understand the light paths, i.e. in-situ aerosol observations of optical and microphysical properties, and essential are in particular the vertical profiles of aerosol optical properties by (Raman) lidar. The approach used in the CINDI-2 campaign held in Cabauw in 2016 is presented in this paper and the results will be discussed in the presentation at the conference.
Experimental Validation of L1 Adaptive Control: Rohrs' Counterexample in Flight
NASA Technical Reports Server (NTRS)
Xargay, Enric; Hovakimyan, Naira; Dobrokhodov, Vladimir; Kaminer, Issac; Kitsios, Ioannis; Cao, Chengyu; Gregory, Irene M.; Valavani, Lena
2010-01-01
The paper presents new results on the verification and in-flight validation of an L1 adaptive flight control system, and proposes a general methodology for verification and validation of adaptive flight control algorithms. The proposed framework is based on Rohrs counterexample, a benchmark problem presented in the early 80s to show the limitations of adaptive controllers developed at that time. In this paper, the framework is used to evaluate the performance and robustness characteristics of an L1 adaptive control augmentation loop implemented onboard a small unmanned aerial vehicle. Hardware-in-the-loop simulations and flight test results confirm the ability of the L1 adaptive controller to maintain stability and predictable performance of the closed loop adaptive system in the presence of general (artificially injected) unmodeled dynamics. The results demonstrate the advantages of L1 adaptive control as a verifiable robust adaptive control architecture with the potential of reducing flight control design costs and facilitating the transition of adaptive control into advanced flight control systems.
Evidence of Construct Validity in the Assessment of Hebephilia.
Stephens, Skye; Seto, Michael C; Goodwill, Alasdair M; Cantor, James M
2017-01-01
Hebephilia refers to a persistent intense sexual interest in pubescent children. Although not as widely studied as pedophilia, studies of hebephilia have indicated convergence in self-report and sexual arousal. The present study expanded on previous work by examining convergent and divergent validity across indicators of hebephilia that included self-report, sexual behavior, and sexual arousal in a sample of 2238 men who had sexually offended. We included men who denied such interest and specifically examined the overlap between hebephilia and pedophilia and examined pedohebephilia (i.e., sexual interests in both prepubescent and pubescent children). Results indicated that there was considerable convergence across indicators of hebephilia. The results suggested poor divergent validity between hebephilia and pedophilia, as there was substantial overlap between the two constructs across analyses. Finally, a distinct pattern of sexual arousal was found in offenders with pedohebephilia. The results of the present study were discussed with a focus on implications for the assessment of sexual interest in children and the conceptualization of pedohebephilia.
Benchmark tests for a Formula SAE Student car prototyping
NASA Astrophysics Data System (ADS)
Mariasiu, Florin
2011-12-01
Aerodynamic characteristics of a vehicle are important elements in its design and construction. A low drag coefficient brings significant fuel savings and increased engine power efficiency. In designing and developing vehicles trough computer simulation process to determine the vehicles aerodynamic characteristics are using dedicated CFD (Computer Fluid Dynamics) software packages. However, the results obtained by this faster and cheaper method, are validated by experiments in wind tunnels tests, which are expensive and were complex testing equipment are used in relatively high costs. Therefore, the emergence and development of new low-cost testing methods to validate CFD simulation results would bring great economic benefits for auto vehicles prototyping process. This paper presents the initial development process of a Formula SAE Student race-car prototype using CFD simulation and also present a measurement system based on low-cost sensors through which CFD simulation results were experimentally validated. CFD software package used for simulation was Solid Works with the FloXpress add-on and experimental measurement system was built using four piezoresistive force sensors FlexiForce type.
GRRATS: A New Approach to Inland Altimetry Processing for Major World Rivers
NASA Astrophysics Data System (ADS)
Coss, S. P.
2016-12-01
Here we present work-in-progress results aimed at generating a new radar altimetry dataset GRRATS (Global River Radar Altimetry Time Series) extracted over global ocean-draining rivers wider than 900 m. GRATTS was developed as a component of the NASA MEaSUREs project (PI: Dennis Lettenmaier, UCLA) to generate pre-SWOT data products for decadal or longer global river elevation changes from multi-mission satellite radar altimetry data. The dataset at present includes 909 time series from 39 rivers. A new method of filtering VS (virtual station) height time series is presented where, DEM based heights were used to establish limits for the ice1 retracked Jason2 and Envisat heights at present. While GRRATS is following in the footsteps of several predecessors, it contributes to one of the critical climate data records in generating a validated and comprehensive hydrologic observations in river height. The current data product includes VSs in north and south Americas, Africa and Eurasia, with the most comprehensive set of Jason-2 and Envisat RA time series available for North America and Eurasia. We present a semi-automated procedure to process returns from river locations, identified with Landsat images and updated water mask extent. Consistent methodologies for flagging ice cover are presented. DEM heights used in height filtering were retained and can be used as river height profiles. All non-validated VS have been assigned a letter grade A-D to aid end users in selection of data. Validated VS are accompanied with a suite of fit statistics. Due to the inclusiveness of the dataset, not all VS were able to undergo validation (415 of 909), but those that were demonstrate that confidence in the data product is warranted. Validation was accomplished using records from 45 in situ gauges from 12 rivers. Meta-analysis was performed to compare each gauge with each VS by relative height. Preliminary validation results are as follows. 89.3% of the data have positive Nash Sutcliff Efficiency (NES) values, and the median NSE value is 0.73. The median standard deviation of error (STDE) is .92 m. GRRATS will soon be publicly available in NetCDF format with CF compliant metadata.
Network Security Validation Using Game Theory
NASA Astrophysics Data System (ADS)
Papadopoulou, Vicky; Gregoriades, Andreas
Non-functional requirements (NFR) such as network security recently gained widespread attention in distributed information systems. Despite their importance however, there is no systematic approach to validate these requirements given the complexity and uncertainty characterizing modern networks. Traditionally, network security requirements specification has been the results of a reactive process. This however, limited the immunity property of the distributed systems that depended on these networks. Security requirements specification need a proactive approach. Networks' infrastructure is constantly under attack by hackers and malicious software that aim to break into computers. To combat these threats, network designers need sophisticated security validation techniques that will guarantee the minimum level of security for their future networks. This paper presents a game-theoretic approach to security requirements validation. An introduction to game theory is presented along with an example that demonstrates the application of the approach.
Smerecnik, Chris M R; Mesters, Ilse; Candel, Math J J M; De Vries, Hein; De Vries, Nanne K
2012-01-01
The role of information processing in understanding people's responses to risk information has recently received substantial attention. One limitation of this research concerns the unavailability of a validated questionnaire of information processing. This article presents two studies in which we describe the development and validation of the Information-Processing Questionnaire to meet that need. Study 1 describes the development and initial validation of the questionnaire. Participants were randomized to either a systematic processing or a heuristic processing condition after which they completed a manipulation check and the initial 15-item questionnaire and again two weeks later. The questionnaire was subjected to factor reliability and validity analyses on both measurement times for purposes of cross-validation of the results. A two-factor solution was observed representing a systematic processing and a heuristic processing subscale. The resulting scale showed good reliability and validity, with the systematic condition scoring significantly higher on the systematic subscale and the heuristic processing condition significantly higher on the heuristic subscale. Study 2 sought to further validate the questionnaire in a field study. Results of the second study corresponded with those of Study 1 and provided further evidence of the validity of the Information-Processing Questionnaire. The availability of this information-processing scale will be a valuable asset for future research and may provide researchers with new research opportunities. © 2011 Society for Risk Analysis.
Using Neural Networks for Sensor Validation
NASA Technical Reports Server (NTRS)
Mattern, Duane L.; Jaw, Link C.; Guo, Ten-Huei; Graham, Ronald; McCoy, William
1998-01-01
This paper presents the results of applying two different types of neural networks in two different approaches to the sensor validation problem. The first approach uses a functional approximation neural network as part of a nonlinear observer in a model-based approach to analytical redundancy. The second approach uses an auto-associative neural network to perform nonlinear principal component analysis on a set of redundant sensors to provide an estimate for a single failed sensor. The approaches are demonstrated using a nonlinear simulation of a turbofan engine. The fault detection and sensor estimation results are presented and the training of the auto-associative neural network to provide sensor estimates is discussed.
Large-Eddy Simulation of Subsonic Jets
NASA Astrophysics Data System (ADS)
Vuorinen, Ville; Wehrfritz, Armin; Yu, Jingzhou; Kaario, Ossi; Larmi, Martti; Boersma, Bendiks Jan
2011-12-01
The present study deals with development and validation of a fully explicit, compressible Runge-Kutta-4 (RK4) Navier-Stokes solver in the opensource CFD programming environment OpenFOAM. The background motivation is to shift towards explicit density based solution strategy and thereby avoid using the pressure based algorithms which are currently proposed in the standard OpenFOAM release for Large-Eddy Simulation (LES). This shift is considered necessary in strongly compressible flows when Ma > 0.5. Our application of interest is related to the pre-mixing stage in direct injection gas engines where high injection pressures are typically utilized. First, the developed flow solver is discussed and validated. Then, the implementation of subsonic inflow conditions using a forcing region in combination with a simplified nozzle geometry is discussed and validated. After this, LES of mixing in compressible, round jets at Ma = 0.3, 0.5 and 0.65 are carried out. Respectively, the Reynolds numbers of the jets correspond to Re = 6000, 10000 and 13000. Results for two meshes are presented. The results imply that the present solver produces turbulent structures, resolves a range of turbulent eddy frequencies and gives also mesh independent results within satisfactory limits for mean flow and turbulence statistics.
An Analysis and Validation of Vocational Special Needs Inservice Issues.
ERIC Educational Resources Information Center
Brown, James M.; And Others
This report presents the results of a four-year effort to develop a valid and reliable inservice needs assessment instrument. (The instrument was designed to identify competencies that should be the focus of inservice training for vocational educators who teach or provide services to special needs learners.) Chapter I is an introduction. Chapter…
School Climate of Educational Institutions: Design and Validation of a Diagnostic Scale
ERIC Educational Resources Information Center
Becerra, Sandra
2016-01-01
School climate is recognized as a relevant factor for the improvement of educative processes, favoring the administrative processes and optimum school performance. The present article is the result of a quantitative research model which had the objective of psychometrically designing and validating a scale to diagnose the organizational climate of…
Initial Development and Validation of the Youth Internalizing Problems Screener
ERIC Educational Resources Information Center
Renshaw, Tyler L.; Cook, Clayton R.
2018-01-01
The present studies report on the initial development and validation of the Youth Internalizing Problems Screener (YIPS), which is a 10-item self-report rating scale for assessing general internalizing problems and identifying depression and anxiety caseness within the context of school mental health screening. Results from Study 1 (N = 177)…
RotCFD Software Validation - Computational and Experimental Data Comparison
NASA Technical Reports Server (NTRS)
Fernandez, Ovidio Montalvo
2014-01-01
RotCFD is a software intended to ease the design of NextGen rotorcraft. Since RotCFD is a new software still in the development process, the results need to be validated to determine the software's accuracy. The purpose of the present document is to explain one of the approaches to accomplish that goal.
ERIC Educational Resources Information Center
Matte, Melody; Lafontaine, Marie-France
2012-01-01
The objective of the present study was to provide validity evidence for the scores from the Romantic Relationship Perfectionism Scale. Results indicate a two-factor structure, adequate reliability, and overall good convergent, concurrent, discriminant, and incremental validity evidence. The strengths and limitations of this measure are discussed.…
Local Assessment: Using Genre Analysis to Validate Directed Self-Placement
ERIC Educational Resources Information Center
Gere, Anne Ruggles; Aull, Laura; Escudero, Moises Damian Perales; Lancaster, Zak; Lei, Elizabeth Vander
2013-01-01
Grounded in the principle that writing assessment should be locally developed and controlled, this article describes a study that contextualizes and validates the decisions that students make in the modified Directed Self-Placement (DSP) process used at the University of Michigan. The authors present results of a detailed text analysis of…
The Trichotillomania Scale for Children: Development and Validation
ERIC Educational Resources Information Center
Tolin, David F.; Diefenbach, Gretchen J.; Flessner, Christopher A.; Franklin, Martin E.; Keuthen, Nancy J.; Moore, Phoebe; Piacentini, John; Stein, Dan J.; Woods, Douglas W.
2008-01-01
Trichotillomania (TTM) is a chronic impulse control disorder characterized by repetitive hair-pulling resulting in alopecia. Although this condition is frequently observed in children and adolescents, research on pediatric TTM has been hampered by the absence of validated measures. The aim of the present study was to develop and test a new…
Stages of Psychometric Measure Development: The Example of the Generalized Expertise Measure (GEM)
ERIC Educational Resources Information Center
Germain, Marie-Line
2006-01-01
This paper chronicles the steps, methods, and presents hypothetical results of quantitative and qualitative studies being conducted to develop a Generalized Expertise Measure (GEM). Per Hinkin (1995), the stages of scale development are domain and item generation, content expert validation, and pilot test. Content/face validity and internal…
Numerical simulation of cavitating flows in shipbuilding
NASA Astrophysics Data System (ADS)
Bagaev, D.; Yegorov, S.; Lobachev, M.; Rudnichenko, A.; Taranov, A.
2018-05-01
The paper presents validation of numerical simulations of cavitating flows around different marine objects carried out at the Krylov State Research Centre (KSRC). Preliminary validation was done with reference to international test objects. The main part of the paper contains results of solving practical problems of ship propulsion design. The validation of numerical simulations by comparison with experimental data shows a good accuracy of the supercomputer technologies existing at Krylov State Research Centre for both hydrodynamic and cavitation characteristics prediction.
An Approach to Comprehensive and Sustainable Solar Wind Model Validation
NASA Astrophysics Data System (ADS)
Rastaetter, L.; MacNeice, P. J.; Mays, M. L.; Boblitt, J. M.; Wiegand, C.
2017-12-01
The number of models of the corona and inner heliosphere and of their updates and upgrades grows steadily, as does the number and character of the model inputs. Maintaining up to date validation of these models, in the face of this constant model evolution, is a necessary but very labor intensive activity. In the last year alone, both NASA's LWS program and the CCMC's ongoing support of model forecasting activities at NOAA SWPC have sought model validation reports on the quality of all aspects of the community's coronal and heliospheric models, including both ambient and CME related wind solutions at L1. In this presentation I will give a brief review of the community's previous model validation results of L1 wind representation. I will discuss the semi-automated web based system we are constructing at the CCMC to present comparative visualizations of all interesting aspects of the solutions from competing models.This system is designed to be easily queried to provide the essential comprehensive inputs to repeat andupdate previous validation studies and support extensions to them. I will illustrate this by demonstrating how the system is being used to support the CCMC/LWS Model Assessment Forum teams focused on the ambient and time dependent corona and solar wind, including CME arrival time and IMF Bz.I will also discuss plans to extend the system to include results from the Forum teams addressing SEP model validation.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lundstrom, Blake; Chakraborty, Sudipta; Lauss, Georg
This paper presents a concise description of state-of-the-art real-time simulation-based testing methods and demonstrates how they can be used independently and/or in combination as an integrated development and validation approach for smart grid DERs and systems. A three-part case study demonstrating the application of this integrated approach at the different stages of development and validation of a system-integrated smart photovoltaic (PV) inverter is also presented. Laboratory testing results and perspectives from two international research laboratories are included in the case study.
PSI-Center Simulations of Validation Platform Experiments
NASA Astrophysics Data System (ADS)
Nelson, B. A.; Akcay, C.; Glasser, A. H.; Hansen, C. J.; Jarboe, T. R.; Marklin, G. J.; Milroy, R. D.; Morgan, K. D.; Norgaard, P. C.; Shumlak, U.; Victor, B. S.; Sovinec, C. R.; O'Bryan, J. B.; Held, E. D.; Ji, J.-Y.; Lukin, V. S.
2013-10-01
The Plasma Science and Innovation Center (PSI-Center - http://www.psicenter.org) supports collaborating validation platform experiments with extended MHD simulations. Collaborators include the Bellan Plasma Group (Caltech), CTH (Auburn U), FRX-L (Los Alamos National Laboratory), HIT-SI (U Wash - UW), LTX (PPPL), MAST (Culham), Pegasus (U Wisc-Madison), PHD/ELF (UW/MSNW), SSX (Swarthmore College), TCSU (UW), and ZaP/ZaP-HD (UW). Modifications have been made to the NIMROD, HiFi, and PSI-Tet codes to specifically model these experiments, including mesh generation/refinement, non-local closures, appropriate boundary conditions (external fields, insulating BCs, etc.), and kinetic and neutral particle interactions. The PSI-Center is exploring application of validation metrics between experimental data and simulations results. Biorthogonal decomposition is proving to be a powerful method to compare global temporal and spatial structures for validation. Results from these simulation and validation studies, as well as an overview of the PSI-Center status will be presented.
Assessment of validity with polytrauma Veteran populations.
Bush, Shane S; Bass, Carmela
2015-01-01
Veterans with polytrauma have suffered injuries to multiple body parts and organs systems, including the brain. The injuries can generate a triad of physical, neurologic/cognitive, and emotional symptoms. Accurate diagnosis is essential for the treatment of these conditions and for fair allocation of benefits. To accurately diagnose polytrauma disorders and their related problems, clinicians take into account the validity of reported history and symptoms, as well as clinical presentations. The purpose of this article is to describe the assessment of validity with polytrauma Veteran populations. Review of scholarly and other relevant literature and clinical experience are utilized. A multimethod approach to validity assessment that includes objective, standardized measures increases the confidence that can be placed in the accuracy of self-reported symptoms and physical, cognitive, and emotional test results. Due to the multivariate nature of polytrauma and the multiple disciplines that play a role in diagnosis and treatment, an ideal model of validity assessment with polytrauma Veteran populations utilizes neurocognitive, neurological, neuropsychiatric, and behavioral measures of validity. An overview of these validity assessment approaches as applied to polytrauma Veteran populations is presented. Veterans, the VA, and society are best served when accurate diagnoses are made.
NASA Astrophysics Data System (ADS)
Jefriadi, J.; Ahda, Y.; Sumarmin, R.
2018-04-01
Based on preliminary research of students worksheet used by teachers has several disadvantages such as students worksheet arranged directly drove learners conduct an investigation without preceded by directing learners to a problem or provide stimulation, student's worksheet not provide a concrete imageand presentation activities on the students worksheet not refer to any one learning models curicullum recommended. To address problems Reviews these students then developed a worksheet based on problem-based learning. This is a research development that using Ploom models. The phases are preliminary research, development and assessment. The instruments used in data collection that includes pieces of observation/interviews, instrument self-evaluation, instruments validity. The results of the validation expert on student worksheets get a valid result the average value 80,1%. Validity of students worksheet based problem-based learning for 9th grade junior high school in living organism inheritance and food biotechnology get valid category.
NASA Technical Reports Server (NTRS)
Daniels, Janet L.; Smith, G. Louis; Priestley, Kory J.; Thomas, Susan
2014-01-01
The validation of in-orbit instrument performance requires stability in both instrument and calibration source. This paper describes a method of validation using lunar observations scanning near full moon by the Clouds and Earth Radiant Energy System (CERES) instruments. Unlike internal calibrations, the Moon offers an external source whose signal variance is predictable and non-degrading. From 2006 to present, in-orbit observations have become standardized and compiled for the Flight Models-1 and -2 aboard the Terra satellite, for Flight Models-3 and -4 aboard the Aqua satellite, and beginning 2012, for Flight Model-5 aboard Suomi-NPP. Instrument performance parameters which can be gleaned are detector gain, pointing accuracy and static detector point response function validation. Lunar observations are used to examine the stability of all three detectors on each of these instruments from 2006 to present. This validation method has yielded results showing trends per CERES data channel of 1.2% per decade or less.
Validation of a Glucocorticoid Receptor Effects-Based Environmental Sample Screening Tool
Abstract describing study and results that will be presented in a seminar presentation to members of UNC-Chapel Hill Curriculum in Toxicology. This seminar presentation will be fulfilling the requirements of the USEPA-UNC Toxicology Cooperative Postdoctoral Training program.
McDonald, Scott D; Beckham, Jean C; Morey, Rajendra A; Calhoun, Patrick S
2009-03-01
The present study examined the psychometric properties and diagnostic efficiency of the Davidson Trauma Scale (DTS), a self-report measure of posttraumatic stress disorder (PTSD) symptoms. Participants included 158 U.S. military veterans who have served since September 11, 2001 (post-9/11). Results support the DTS as a valid self-report measure of PTSD symptoms. The DTS demonstrated good internal consistency, concurrent validity, and convergent and divergent validity. Diagnostic efficiency was excellent when discriminating between veterans with PTSD and veterans with no Axis I diagnosis. However, although satisfactory by conventional standards, efficiency was substantially attenuated when discriminating between PTSD and other Axis I diagnoses. Thus, results illustrate that potency of the DTS as a diagnostic aid was highly dependent on the comparison group used for analyses. Results are discussed in terms of applications to clinical practice and research.
Janssen, Ellen M; Marshall, Deborah A; Hauber, A Brett; Bridges, John F P
2017-12-01
The recent endorsement of discrete-choice experiments (DCEs) and other stated-preference methods by regulatory and health technology assessment (HTA) agencies has placed a greater focus on demonstrating the validity and reliability of preference results. Areas covered: We present a practical overview of tests of validity and reliability that have been applied in the health DCE literature and explore other study qualities of DCEs. From the published literature, we identify a variety of methods to assess the validity and reliability of DCEs. We conceptualize these methods to create a conceptual model with four domains: measurement validity, measurement reliability, choice validity, and choice reliability. Each domain consists of three categories that can be assessed using one to four procedures (for a total of 24 tests). We present how these tests have been applied in the literature and direct readers to applications of these tests in the health DCE literature. Based on a stakeholder engagement exercise, we consider the importance of study characteristics beyond traditional concepts of validity and reliability. Expert commentary: We discuss study design considerations to assess the validity and reliability of a DCE, consider limitations to the current application of tests, and discuss future work to consider the quality of DCEs in healthcare.
VDA, a Method of Choosing a Better Algorithm with Fewer Validations
Kluger, Yuval
2011-01-01
The multitude of bioinformatics algorithms designed for performing a particular computational task presents end-users with the problem of selecting the most appropriate computational tool for analyzing their biological data. The choice of the best available method is often based on expensive experimental validation of the results. We propose an approach to design validation sets for method comparison and performance assessment that are effective in terms of cost and discrimination power. Validation Discriminant Analysis (VDA) is a method for designing a minimal validation dataset to allow reliable comparisons between the performances of different algorithms. Implementation of our VDA approach achieves this reduction by selecting predictions that maximize the minimum Hamming distance between algorithmic predictions in the validation set. We show that VDA can be used to correctly rank algorithms according to their performances. These results are further supported by simulations and by realistic algorithmic comparisons in silico. VDA is a novel, cost-efficient method for minimizing the number of validation experiments necessary for reliable performance estimation and fair comparison between algorithms. Our VDA software is available at http://sourceforge.net/projects/klugerlab/files/VDA/ PMID:22046256
VEGGIE and the VEG-01 Hardware Validation Test
NASA Technical Reports Server (NTRS)
Massa, Gioia
2015-01-01
This is a presentation to NASA HQ for a lunch-and-learn detailing the Veggie testing and results. Space Life and Physical Sciences plans to record this presentation and make it available for public display.
Refinement, Validation and Benchmarking of a Model for E-Government Service Quality
NASA Astrophysics Data System (ADS)
Magoutas, Babis; Mentzas, Gregoris
This paper presents the refinement and validation of a model for Quality of e-Government Services (QeGS). We built upon our previous work where a conceptualized model was identified and put focus on the confirmatory phase of the model development process, in order to come up with a valid and reliable QeGS model. The validated model, which was benchmarked with very positive results with similar models found in the literature, can be used for measuring the QeGS in a reliable and valid manner. This will form the basis for a continuous quality improvement process, unleashing the full potential of e-government services for both citizens and public administrations.
Accelerated Aging in Electrolytic Capacitors for Prognostics
NASA Technical Reports Server (NTRS)
Celaya, Jose R.; Kulkarni, Chetan; Saha, Sankalita; Biswas, Gautam; Goebel, Kai Frank
2012-01-01
The focus of this work is the analysis of different degradation phenomena based on thermal overstress and electrical overstress accelerated aging systems and the use of accelerated aging techniques for prognostics algorithm development. Results on thermal overstress and electrical overstress experiments are presented. In addition, preliminary results toward the development of physics-based degradation models are presented focusing on the electrolyte evaporation failure mechanism. An empirical degradation model based on percentage capacitance loss under electrical overstress is presented and used in: (i) a Bayesian-based implementation of model-based prognostics using a discrete Kalman filter for health state estimation, and (ii) a dynamic system representation of the degradation model for forecasting and remaining useful life (RUL) estimation. A leave-one-out validation methodology is used to assess the validity of the methodology under the small sample size constrain. The results observed on the RUL estimation are consistent through the validation tests comparing relative accuracy and prediction error. It has been observed that the inaccuracy of the model to represent the change in degradation behavior observed at the end of the test data is consistent throughout the validation tests, indicating the need of a more detailed degradation model or the use of an algorithm that could estimate model parameters on-line. Based on the observed degradation process under different stress intensity with rest periods, the need for more sophisticated degradation models is further supported. The current degradation model does not represent the capacitance recovery over rest periods following an accelerated aging stress period.
Validation of new psychosocial factors questionnaires: a Colombian national study.
Villalobos, Gloria H; Vargas, Angélica M; Rondón, Martin A; Felknor, Sarah A
2013-01-01
The study of workers' health problems possibly associated with stressful conditions requires valid and reliable tools for monitoring risk factors. The present study validates two questionnaires to assess psychosocial risk factors for stress-related illnesses within a sample of Colombian workers. The validation process was based on a representative sample survey of 2,360 Colombian employees, aged 18-70 years. Worker response rate was 90%; 46% of the responders were women. Internal consistency was calculated, construct validity was tested with factor analysis and concurrent validity was tested with Spearman correlations. The questionnaires demonstrated adequate reliability (0.88-0.95). Factor analysis confirmed the dimensions proposed in the measurement model. Concurrent validity resulted in significant correlations with stress and health symptoms. "Work and Non-work Psychosocial Factors Questionnaires" were found to be valid and reliable for the assessment of workers' psychosocial factors, and they provide information for research and intervention. Copyright © 2012 Wiley Periodicals, Inc.
Multiple Versus Single Set Validation of Multivariate Models to Avoid Mistakes.
Harrington, Peter de Boves
2018-01-02
Validation of multivariate models is of current importance for a wide range of chemical applications. Although important, it is neglected. The common practice is to use a single external validation set for evaluation. This approach is deficient and may mislead investigators with results that are specific to the single validation set of data. In addition, no statistics are available regarding the precision of a derived figure of merit (FOM). A statistical approach using bootstrapped Latin partitions is advocated. This validation method makes an efficient use of the data because each object is used once for validation. It was reviewed a decade earlier but primarily for the optimization of chemometric models this review presents the reasons it should be used for generalized statistical validation. Average FOMs with confidence intervals are reported and powerful, matched-sample statistics may be applied for comparing models and methods. Examples demonstrate the problems with single validation sets.
Prognostics of Power Electronics, Methods and Validation Experiments
NASA Technical Reports Server (NTRS)
Kulkarni, Chetan S.; Celaya, Jose R.; Biswas, Gautam; Goebel, Kai
2012-01-01
Abstract Failure of electronic devices is a concern for future electric aircrafts that will see an increase of electronics to drive and control safety-critical equipment throughout the aircraft. As a result, investigation of precursors to failure in electronics and prediction of remaining life of electronic components is of key importance. DC-DC power converters are power electronics systems employed typically as sourcing elements for avionics equipment. Current research efforts in prognostics for these power systems focuses on the identification of failure mechanisms and the development of accelerated aging methodologies and systems to accelerate the aging process of test devices, while continuously measuring key electrical and thermal parameters. Preliminary model-based prognostics algorithms have been developed making use of empirical degradation models and physics-inspired degradation model with focus on key components like electrolytic capacitors and power MOSFETs (metal-oxide-semiconductor-field-effect-transistor). This paper presents current results on the development of validation methods for prognostics algorithms of power electrolytic capacitors. Particularly, in the use of accelerated aging systems for algorithm validation. Validation of prognostics algorithms present difficulties in practice due to the lack of run-to-failure experiments in deployed systems. By using accelerated experiments, we circumvent this problem in order to define initial validation activities.
Benchmarking the ATLAS software through the Kit Validation engine
NASA Astrophysics Data System (ADS)
De Salvo, Alessandro; Brasolin, Franco
2010-04-01
The measurement of the experiment software performance is a very important metric in order to choose the most effective resources to be used and to discover the bottlenecks of the code implementation. In this work we present the benchmark techniques used to measure the ATLAS software performance through the ATLAS offline testing engine Kit Validation and the online portal Global Kit Validation. The performance measurements, the data collection, the online analysis and display of the results will be presented. The results of the measurement on different platforms and architectures will be shown, giving a full report on the CPU power and memory consumption of the Monte Carlo generation, simulation, digitization and reconstruction of the most CPU-intensive channels. The impact of the multi-core computing on the ATLAS software performance will also be presented, comparing the behavior of different architectures when increasing the number of concurrent processes. The benchmark techniques described in this paper have been used in the HEPiX group since the beginning of 2008 to help defining the performance metrics for the High Energy Physics applications, based on the real experiment software.
Exploring rationality in schizophrenia
Mortensen, Erik Lykke; Owen, Gareth; Nordgaard, Julie; Jansson, Lennart; Sæbye, Ditte; Flensborg-Madsen, Trine; Parnas, Josef
2015-01-01
Background Empirical studies of rationality (syllogisms) in patients with schizophrenia have obtained different results. One study found that patients reason more logically if the syllogism is presented through an unusual content. Aims To explore syllogism-based rationality in schizophrenia. Method Thirty-eight first-admitted patients with schizophrenia and 38 healthy controls solved 29 syllogisms that varied in presentation content (ordinary v. unusual) and validity (valid v. invalid). Statistical tests were made of unadjusted and adjusted group differences in models adjusting for intelligence and neuropsychological test performance. Results Controls outperformed patients on all syllogism types, but the difference between the two groups was only significant for valid syllogisms presented with unusual content. However, when adjusting for intelligence and neuropsychological test performance, all group differences became non-significant. Conclusions When taking intelligence and neuropsychological performance into account, patients with schizophrenia and controls perform similarly on syllogism tests of rationality. Declaration of interest None. Copyright and usage © The Royal College of Psychiatrists 2015. This is an open access article distributed under the terms of the Creative Commons Non-Commercial, No Derivatives (CC BY-NC-ND) licence. PMID:27703730
Design and validation of the eyesafe ladar testbed (ELT) using the LadarSIM system simulator
NASA Astrophysics Data System (ADS)
Neilsen, Kevin D.; Budge, Scott E.; Pack, Robert T.; Fullmer, R. Rees; Cook, T. Dean
2009-05-01
The development of an experimental full-waveform LADAR system has been enhanced with the assistance of the LadarSIM system simulation software. The Eyesafe LADAR Test-bed (ELT) was designed as a raster scanning, single-beam, energy-detection LADAR with the capability of digitizing and recording the return pulse waveform at up to 2 GHz for 3D off-line image formation research in the laboratory. To assist in the design phase, the full-waveform LADAR simulation in LadarSIM was used to simulate the expected return waveforms for various system design parameters, target characteristics, and target ranges. Once the design was finalized and the ELT constructed, the measured specifications of the system and experimental data captured from the operational sensor were used to validate the behavior of the system as predicted during the design phase. This paper presents the methodology used, and lessons learned from this "design, build, validate" process. Simulated results from the design phase are presented, and these are compared to simulated results using measured system parameters and operational sensor data. The advantages of this simulation-based process are also presented.
NASA Technical Reports Server (NTRS)
Bock, Larry A.; Hauser, Joseph E.; Mathews, Douglas C.; Topol, David A.; Bielak, Gerald W.; Lan, Justin H.; Premo, John W.
2014-01-01
This report presents results of the work completed in Phase 2 of the Engine Validation of Noise Reduction Concepts (EVNRC) contract. The purpose of the program is to validate, through engine testing, advanced noise reduction concepts aimed at reducing engine noise up to 6 EPNdB and improving nacelle suppression by 50 percent relative to 1992 technology. Phase 1 of the program is completed and is summarized in NASA/CR-2014-218088.
Newton, Katherine M; Peissig, Peggy L; Kho, Abel Ngo; Bielinski, Suzette J; Berg, Richard L; Choudhary, Vidhu; Basford, Melissa; Chute, Christopher G; Kullo, Iftikhar J; Li, Rongling; Pacheco, Jennifer A; Rasmussen, Luke V; Spangler, Leslie; Denny, Joshua C
2013-06-01
Genetic studies require precise phenotype definitions, but electronic medical record (EMR) phenotype data are recorded inconsistently and in a variety of formats. To present lessons learned about validation of EMR-based phenotypes from the Electronic Medical Records and Genomics (eMERGE) studies. The eMERGE network created and validated 13 EMR-derived phenotype algorithms. Network sites are Group Health, Marshfield Clinic, Mayo Clinic, Northwestern University, and Vanderbilt University. By validating EMR-derived phenotypes we learned that: (1) multisite validation improves phenotype algorithm accuracy; (2) targets for validation should be carefully considered and defined; (3) specifying time frames for review of variables eases validation time and improves accuracy; (4) using repeated measures requires defining the relevant time period and specifying the most meaningful value to be studied; (5) patient movement in and out of the health plan (transience) can result in incomplete or fragmented data; (6) the review scope should be defined carefully; (7) particular care is required in combining EMR and research data; (8) medication data can be assessed using claims, medications dispensed, or medications prescribed; (9) algorithm development and validation work best as an iterative process; and (10) validation by content experts or structured chart review can provide accurate results. Despite the diverse structure of the five EMRs of the eMERGE sites, we developed, validated, and successfully deployed 13 electronic phenotype algorithms. Validation is a worthwhile process that not only measures phenotype performance but also strengthens phenotype algorithm definitions and enhances their inter-institutional sharing.
NASA Astrophysics Data System (ADS)
Gutiérrez, Jose Manuel; Maraun, Douglas; Widmann, Martin; Huth, Radan; Hertig, Elke; Benestad, Rasmus; Roessler, Ole; Wibig, Joanna; Wilcke, Renate; Kotlarski, Sven
2016-04-01
VALUE is an open European network to validate and compare downscaling methods for climate change research (http://www.value-cost.eu). A key deliverable of VALUE is the development of a systematic validation framework to enable the assessment and comparison of both dynamical and statistical downscaling methods. This framework is based on a user-focused validation tree, guiding the selection of relevant validation indices and performance measures for different aspects of the validation (marginal, temporal, spatial, multi-variable). Moreover, several experiments have been designed to isolate specific points in the downscaling procedure where problems may occur (assessment of intrinsic performance, effect of errors inherited from the global models, effect of non-stationarity, etc.). The list of downscaling experiments includes 1) cross-validation with perfect predictors, 2) GCM predictors -aligned with EURO-CORDEX experiment- and 3) pseudo reality predictors (see Maraun et al. 2015, Earth's Future, 3, doi:10.1002/2014EF000259, for more details). The results of these experiments are gathered, validated and publicly distributed through the VALUE validation portal, allowing for a comprehensive community-open downscaling intercomparison study. In this contribution we describe the overall results from Experiment 1), consisting of a European wide 5-fold cross-validation (with consecutive 6-year periods from 1979 to 2008) using predictors from ERA-Interim to downscale precipitation and temperatures (minimum and maximum) over a set of 86 ECA&D stations representative of the main geographical and climatic regions in Europe. As a result of the open call for contribution to this experiment (closed in Dec. 2015), over 40 methods representative of the main approaches (MOS and Perfect Prognosis, PP) and techniques (linear scaling, quantile mapping, analogs, weather typing, linear and generalized regression, weather generators, etc.) were submitted, including information both data (downscaled values) and metadata (characterizing different aspects of the downscaling methods). This constitutes the largest and most comprehensive to date intercomparison of statistical downscaling methods. Here, we present an overall validation, analyzing marginal and temporal aspects to assess the intrinsic performance and added value of statistical downscaling methods at both annual and seasonal levels. This validation takes into account the different properties/limitations of different approaches and techniques (as reported in the provided metadata) in order to perform a fair comparison. It is pointed out that this experiment alone is not sufficient to evaluate the limitations of (MOS) bias correction techniques. Moreover, it also does not fully validate PP since we don't learn whether we have the right predictors and whether the PP assumption is valid. These problems will be analyzed in the subsequent community-open VALUE experiments 2) and 3), which will be open for participation along the present year.
[Development and validating an educational booklet for childbirth companions].
Teles, Liana Mara Rocha; Oliveira, Amanda Souza de; Campos, Fernanda Câmara; Lima, Thaís Marques; Costa, Camila Chaves da; Gomes, Linicarla Fabiole de Souza; Oriá, Mônica Oliveira Batista; Damasceno, Ana Kelve de Castro
2014-12-01
The article describes the steps in producing and validating an educational booklet for childbirth companions. Methodological study conducted in 2011 consisting of the following steps: situational assessment; establishing brochure content; content selection and referencing; drafting the text; design of illustrations; layout; consultation of specialists; consultation of target audience; amendments; proofreading; evaluation using the Flesch Reading Ease Formula. The topics portrayed the sequence of events involving support from gestation to the postpartum period. The concordance rate among companions was greater than or equal to 81.8% for the topics organisation, writing style, presentation and motives. The overall Content Validity Index of the booklet was 0.94. The booklet was classified as easy reading or very easy reading according to the results of the Flesch Reading Ease Formula. The presentation and content of the manual were validated for use with the target audience by the specialists and representatives of the target audience.
The Dirty Dozen Scale: Validation of a Polish Version and Extension of the Nomological Net.
Czarna, Anna Z; Jonason, Peter K; Dufner, Michael; Kossowska, Małgorzata
2016-01-01
In five studies (total N = 1300) we developed and validated a Polish version of the Dirty Dozen measure (DTDD-P) that measures the three traits of the Dark Triad, Machiavellianism, psychopathy, and narcissism. We detail the presence and stability of a bifactor structure of the 12 items and present evidence for good internal consistency and test-retest reliability. We examine the nomological network surrounding the Dark Triad and show that both the Dark Triad total score and the subscales have acceptable validity. We also present evidence on the Dark Triad and moral behavior. Dark Triad predicts utilitarian moral choice (e.g., approval for sacrificing somebody's life for the sake of saving others) and this link is mediated by low empathic concern. In total, our results suggest that the Polish Dirty Dozen-Parszywa Dwunastka-is valid, stable, and useful for the study of lingering puzzles in the literature.
Spanish Adaptation and Validation of the Family Quality of Life Survey
ERIC Educational Resources Information Center
Verdugo, M. A.; Cordoba, L.; Gomez, J.
2005-01-01
Background: Assessing the quality of life (QOL) for families that include a person with a disability have recently become a major emphasis in cross-cultural QOL studies. The present study examined the reliability and validity of the Family Quality of Life Survey (FQOL) on a Spanish sample. Method and Results: The sample comprised 385 families who…
ERIC Educational Resources Information Center
Cochran, Deborah C.; Gallagher, Peggy A.; Stayton, Vicki D.; Dinnebeil, Laurie A.; Lifter, Karin; Chandler, Lynette K.; Christensen, Kimberly A.
2012-01-01
Results of the field validation survey of the revised initial and new advanced Council for Exceptional Children (CEC) Division for Early Childhood (DEC) early childhood special education (ECSE)/early intervention (EI) personnel standards are presented. Personnel standards are used as part of educational accountability systems and in teacher…
ERIC Educational Resources Information Center
Swenson, Lance P.; Esposito-Smythers, Christianne; Hunt, Jeffrey I.; Hollander, Beth L. G.; Dyl, Jennifer; Rizzo, Christie J.; Steinley, Douglas L.; Spirito, Anthony
2007-01-01
A study was conducted to examine the concurrent validity of the Children's Interview for Psychiatric Syndromes (ChIPS) for adolescent inpatients aged 12 to 18. The results reveal moderate agreement between ChIPS diagnoses and Schedule for Affective Disorder sand Schizophrenia for School-Age Children-Present and Lifetime version diagnoses.
easyCBM® Reading Criterion Related Validity Evidence: Grades K-1. Technical Report #1309
ERIC Educational Resources Information Center
Lai, Cheng-Fei; Alonzo, Julie; Tindal, Gerald
2013-01-01
In this technical report, we present the results of a study to gather criterion-related evidence for Grade K-1 easyCBM® reading measures. We used correlations to examine the relation between the easyCBM® measures and other published measures with known reliability and validity evidence, including the Dynamic Indicators of Basic Early Literacy…
Arquero, José L; McLain, David L
2010-05-01
Despite widespread interest in ambiguity tolerance and other information-related individual differences, existing measures are conceptually dispersed and psychometrically weak. This paper presents the Spanish version of MSTAT-II, a short, stimulus-oriented, and psychometrically improved measure of an individual's orientation toward ambiguous stimuli. Results obtained reveal adequate reliability, validity, and temporal stability. These results support the use of MSTAT-II as an adequate measure of ambiguity tolerance.
Biljak, Vanja Radisic; Ozvald, Ivan; Radeljak, Andrea; Majdenic, Kresimir; Lasic, Branka; Siftar, Zoran; Lovrencic, Marijana Vucic; Flegar-Mestric, Zlata
2012-01-01
Introduction The aim of the study was to present a protocol for laboratory information system (LIS) and hospital information system (HIS) validation at the Institute of Clinical Chemistry and Laboratory Medicine of the Merkur University Hospital, Zagreb, Croatia. Materials and methods: Validity of data traceability was checked by entering all test requests for virtual patient into HIS/LIS and printing corresponding barcoded labels that provided laboratory analyzers with the information on requested tests. The original printouts of the test results from laboratory analyzer(s) were compared with the data obtained from LIS and entered into the provided template. Transfer of data from LIS to HIS was examined by requesting all tests in HIS and creating real data in a finding generated in LIS. Data obtained from LIS and HIS were entered into a corresponding template. The main outcome measure was the accuracy of transfer obtained from laboratory analyzers and results transferred from LIS and HIS expressed as percentage (%). Results: The accuracy of data transfer from laboratory analyzers to LIS was 99.5% and of that from LIS to HIS 100%. Conclusion: We presented our established validation protocol for laboratory information system and demonstrated that a system meets its intended purpose. PMID:22384522
Łuczak, Anna; Tarnowski, Adam
2014-09-01
This paper presents the results of a study aimed at validating psychological questionnaires evaluating temperamental and personality features. It discusses their usefulness in diagnosing drivers' aptitude for safe driving and working as professional drivers. Three psychological questionnaires were validated: the Formal Characteristics of Behaviour - Temperament Inventory (FCB-TI), the Eysenck Personality Questionnaire - Revised and Short Scale (EPQ-R (S)) and the Impulsiveness Questionnaire (IVE). Three groups of drivers (n=246) aged 19-75 participated in the study. Group I (professional drivers; n=96) and Group II (nonprofessional drivers; n=75) had never been involved in road crashes, whereas Group III (nonprofessional drivers; n=75) were offenders involved in fatal injury road crashes. Criterion-related validity, Cronbach's alpha and Guttman split-half reliability coefficient were in assessing the psychometric properties of the questionnaires. There were some significant differences between Groups II and III for most traits. However, contrary to expectations, higher Emotional Reactivity, Perseveration and lower Endurance as well as higher Neuroticism, Impulsiveness and Venturesomeness were determined for Group II than for Group III. Additionally, the temperament and personality profile of Group II turned out to be less fitted to the profile of safe drivers than that of Group III, whose profile was actually similar to that of Group I. This seems to result from a high tendency for a positive self-presentation among Group I and Group III (a significantly higher result on the Lie scale in comparison with Group II). The results suggest that if psychological tests are to decide on whether a person may be a professional driver or may drive vehicles, the three questionnaires (FCB-TI, EPQ-R(S) and IVE) do not provide a valid diagnosis of professional drivers' aptitude because of drivers' high tendency for positive self-presentation. However, they can be used in job counselling and in screening high-risk drivers. Copyright © 2014 Elsevier Ltd. All rights reserved.
Thermal-hydraulics Analysis of a Radioisotope-powered Mars Hopper Propulsion System
DOE Office of Scientific and Technical Information (OSTI.GOV)
Robert C. O'Brien; Andrew C. Klein; William T. Taitano
Thermal-hydraulics analyses results produced using a combined suite of computational design and analysis codes are presented for the preliminary design of a concept Radioisotope Thermal Rocket (RTR) propulsion system. Modeling of the transient heating and steady state temperatures of the system is presented. Simulation results for propellant blow down during impulsive operation are also presented. The results from this study validate the feasibility of a practical thermally capacitive RTR propulsion system.
The analytical validation of the Oncotype DX Recurrence Score assay
Baehner, Frederick L
2016-01-01
In vitro diagnostic multivariate index assays are highly complex molecular assays that can provide clinically actionable information regarding the underlying tumour biology and facilitate personalised treatment. These assays are only useful in clinical practice if all of the following are established: analytical validation (i.e., how accurately/reliably the assay measures the molecular characteristics), clinical validation (i.e., how consistently/accurately the test detects/predicts the outcomes of interest), and clinical utility (i.e., how likely the test is to significantly improve patient outcomes). In considering the use of these assays, clinicians often focus primarily on the clinical validity/utility; however, the analytical validity of an assay (e.g., its accuracy, reproducibility, and standardisation) should also be evaluated and carefully considered. This review focuses on the rigorous analytical validation and performance of the Oncotype DX® Breast Cancer Assay, which is performed at the Central Clinical Reference Laboratory of Genomic Health, Inc. The assay process includes tumour tissue enrichment (if needed), RNA extraction, gene expression quantitation (using a gene panel consisting of 16 cancer genes plus 5 reference genes and quantitative real-time RT-PCR), and an automated computer algorithm to produce a Recurrence Score® result (scale: 0–100). This review presents evidence showing that the Recurrence Score result reported for each patient falls within a tight clinically relevant confidence interval. Specifically, the review discusses how the development of the assay was designed to optimise assay performance, presents data supporting its analytical validity, and describes the quality control and assurance programmes that ensure optimal test performance over time. PMID:27729940
The analytical validation of the Oncotype DX Recurrence Score assay.
Baehner, Frederick L
2016-01-01
In vitro diagnostic multivariate index assays are highly complex molecular assays that can provide clinically actionable information regarding the underlying tumour biology and facilitate personalised treatment. These assays are only useful in clinical practice if all of the following are established: analytical validation (i.e., how accurately/reliably the assay measures the molecular characteristics), clinical validation (i.e., how consistently/accurately the test detects/predicts the outcomes of interest), and clinical utility (i.e., how likely the test is to significantly improve patient outcomes). In considering the use of these assays, clinicians often focus primarily on the clinical validity/utility; however, the analytical validity of an assay (e.g., its accuracy, reproducibility, and standardisation) should also be evaluated and carefully considered. This review focuses on the rigorous analytical validation and performance of the Oncotype DX ® Breast Cancer Assay, which is performed at the Central Clinical Reference Laboratory of Genomic Health, Inc. The assay process includes tumour tissue enrichment (if needed), RNA extraction, gene expression quantitation (using a gene panel consisting of 16 cancer genes plus 5 reference genes and quantitative real-time RT-PCR), and an automated computer algorithm to produce a Recurrence Score ® result (scale: 0-100). This review presents evidence showing that the Recurrence Score result reported for each patient falls within a tight clinically relevant confidence interval. Specifically, the review discusses how the development of the assay was designed to optimise assay performance, presents data supporting its analytical validity, and describes the quality control and assurance programmes that ensure optimal test performance over time.
NASA Technical Reports Server (NTRS)
Gravitz, Robert M.; Hale, Joseph
2006-01-01
NASA's Exploration Systems Mission Directorate (ESMD) is implementing a management approach for modeling and simulation (M&S) that will provide decision-makers information on the model's fidelity, credibility, and quality. This information will allow the decision-maker to understand the risks involved in using a model's results in the decision-making process. This presentation will discuss NASA's approach for verification and validation (V&V) of its models or simulations supporting space exploration. This presentation will describe NASA's V&V process and the associated M&S verification and validation (V&V) activities required to support the decision-making process. The M&S V&V Plan and V&V Report templates for ESMD will also be illustrated.
Design and Control of Compliant Tensegrity Robots Through Simulation and Hardware Validation
NASA Technical Reports Server (NTRS)
Caluwaerts, Ken; Despraz, Jeremie; Iscen, Atil; Sabelhaus, Andrew P.; Bruce, Jonathan; Schrauwen, Benjamin; Sunspiral, Vytas
2014-01-01
To better understand the role of tensegrity structures in biological systems and their application to robotics, the Dynamic Tensegrity Robotics Lab at NASA Ames Research Center has developed and validated two different software environments for the analysis, simulation, and design of tensegrity robots. These tools, along with new control methodologies and the modular hardware components developed to validate them, are presented as a system for the design of actuated tensegrity structures. As evidenced from their appearance in many biological systems, tensegrity ("tensile-integrity") structures have unique physical properties which make them ideal for interaction with uncertain environments. Yet these characteristics, such as variable structural compliance, and global multi-path load distribution through the tension network, make design and control of bio-inspired tensegrity robots extremely challenging. This work presents the progress in using these two tools in tackling the design and control challenges. The results of this analysis includes multiple novel control approaches for mobility and terrain interaction of spherical tensegrity structures. The current hardware prototype of a six-bar tensegrity, code-named ReCTeR, is presented in the context of this validation.
Further Development of the PCRTM Model and RT Model Inter Comparison
NASA Technical Reports Server (NTRS)
Yang, Qiguang; Liu, Xu; Wu, Wan; Kizer, Susan
2015-01-01
New results for the development of the PCRTM model will be presented. The new results were used for IASI retrieval validation inter comparison and better results were obtained compare to other fast radiative transfer models.
[Publication practices of academics in medical psychology and in psychosomatics and psychotherapy].
Decker, O; Brähler, E
2001-07-01
When qualifying for higher academic positions junior academics face increasing demands for submitting papers for publication. The criteria for assessing these publications are presently under discussion. Contributions to international English language journals are more highly regarded, and it has become indispensable to have papers published in journals listed in SCI and SSCI. The question remains whether these criteria are valid to judge academic qualifications. Whereas one criterion for validity may be the publication practice of the present academic representatives, it appears that to some extent the chairs themselves would not fulfill the requirements for academic qualification today. Results regarding this are presented and discussed.
Validation of the ENVISAT atmospheric chemistry instruments
NASA Astrophysics Data System (ADS)
Snoeij, P.; Koopman, R.; Attema, E.; Zehner, C.; Wursteisen, P.; Dehn, A.; de Laurentius, M.; Frerick, J.; Mantovani, R.; Saavedra de Miguel, L.
Three atmospheric-chemistry sensors form part of the ENVISAT payload that has been placed into orbit in March 2002. This paper presents the ENVISAT mission status and data policy, and reviews the end-to-end performance of the GOMOS, MIPAS and SCIAMACHY observation systems and will discuss the validation aspects of these instruments. In particular, for each instrument, the review addresses mission planning, in-orbit performance, calibration, data processor algorithms and configuration, reprocessing strategy, and product quality control assessment. An important part of the quality assessment is the Geophysical Validation. At the ACVT Validation workshop held in Frascati, Italy, from 3-7 May 2004, scientists and engineers presented analyses of the exhaustive series of tests that have been run on each of ENVISAT atmospheric chemistry sensors since the spacecraft was launched in March 2002. On the basis of workshop results it was decided that most of the data products provided by the ENVISAT atmospheric chemistry instruments are ready for operational delivery. Although the main validation phase for the atmospheric instruments of ENVISAT will be completed soon, ongoing validation products will continue throughout the lifetime of the ENVISAT mission. The long-term validation phase will: Provide assurance of data quality and accuracy for applications such as climate change research Investigate the fully representative range of geophysical conditions Investigate the fully representative range of seasonal cycles Perform long term monitoring for instrumental drifts and other artefacts Validate new products. This paper will also discuss the general status of the validation activities for GOMOS, MIPAS and SCIAMACHY. The main and long-term geophysical validation programme will be presented. The flight and ground-segment planning, configuration and performance characterization will be discussed. The evolution of each of the observation systems has been distinct during the mission history: the GOMOS instrument operation has undergone an important change, and its processing chain is subject of two upgrades. For MIPAS intervention on one of the on-board subsystems has proven necessary, and an important data processing improvement cycle has been completed through reconfiguration of the processing chain. SCIAMACHY operations have required only minor interventions, and the presentation will focus on the processing chain evolution.
Mean Flow and Noise Prediction for a Separate Flow Jet With Chevron Mixers
NASA Technical Reports Server (NTRS)
Koch, L. Danielle; Bridges, James; Khavaran, Abbas
2004-01-01
Experimental and numerical results are presented here for a separate flow nozzle employing chevrons arranged in an alternating pattern on the core nozzle. Comparisons of these results demonstrate that the combination of the WIND/MGBK suite of codes can predict the noise reduction trends measured between separate flow jets with and without chevrons on the core nozzle. Mean flow predictions were validated against Particle Image Velocimetry (PIV), pressure, and temperature data, and noise predictions were validated against acoustic measurements recorded in the NASA Glenn Aeroacoustic Propulsion Lab. Comparisons are also made to results from the CRAFT code. The work presented here is part of an on-going assessment of the WIND/MGBK suite for use in designing the next generation of quiet nozzles for turbofan engines.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ortiz-Ramŕez, Pablo, E-mail: rapeitor@ug.uchile.cl; Larroquette, Philippe; Camilla, S.
The intrinsic spatial efficiency method is a new absolute method to determine the efficiency of a gamma spectroscopy system for any extended source. In the original work the method was experimentally demonstrated and validated for homogeneous cylindrical sources containing {sup 137}Cs, whose sizes varied over a small range (29.5 mm radius and 15.0 to 25.9 mm height). In this work we present an extension of the validation over a wide range of sizes. The dimensions of the cylindrical sources vary between 10 to 40 mm height and 8 to 30 mm radius. The cylindrical sources were prepared using the referencemore » material IAEA-372, which had a specific activity of 11320 Bq/kg at july 2006. The obtained results were better for the sources with 29 mm radius showing relative bias lesser than 5% and for the sources with 10 mm height showing relative bias lesser than 6%. In comparison with the obtained results in the work where we present the method, the majority of these results show an excellent agreement.« less
Validation of the Intrinsic Spirituality Scale (ISS) with Muslims.
Hodge, David R; Zidan, Tarek; Husain, Altaf
2015-12-01
This study validates an existing spirituality measure--the intrinsic spirituality scale (ISS)--for use with Muslims in the United States. A confirmatory factor analysis was conducted with a diverse sample of self-identified Muslims (N = 281). Validity and reliability were assessed along with criterion and concurrent validity. The measurement model fit the data well, normed χ2 = 2.50, CFI = 0.99, RMSEA = 0.07, and SRMR = 0.02. All 6 items that comprise the ISS demonstrated satisfactory levels of validity (λ > .70) and reliability (R2 > .50). The Cronbach's alpha obtained with the present sample was .93. Appropriate correlations with theoretically linked constructs demonstrated criterion and concurrent validity. The results suggest the ISS is a valid measure of spirituality in clinical settings with the rapidly growing Muslim population. The ISS may, for instance, provide an efficient screening tool to identify Muslims that are particularly likely to benefit from spiritually accommodative treatments. (c) 2015 APA, all rights reserved).
Initial Retrieval Validation from the Joint Airborne IASI Validation Experiment (JAIVEx)
NASA Technical Reports Server (NTRS)
Zhou, Daniel K.; Liu, Xu; Smith, WIlliam L.; Larar, Allen M.; Taylor, Jonathan P.; Revercomb, Henry E.; Mango, Stephen A.; Schluessel, Peter; Calbet, Xavier
2007-01-01
The Joint Airborne IASI Validation Experiment (JAIVEx) was conducted during April 2007 mainly for validation of the Infrared Atmospheric Sounding Interferometer (IASI) on the MetOp satellite, but also included a strong component focusing on validation of the Atmospheric InfraRed Sounder (AIRS) aboard the AQUA satellite. The cross validation of IASI and AIRS is important for the joint use of their data in the global Numerical Weather Prediction process. Initial inter-comparisons of geophysical products have been conducted from different aspects, such as using different measurements from airborne ultraspectral Fourier transform spectrometers (specifically, the NPOESS Airborne Sounder Testbed Interferometer (NAST-I) and the Scanning-High resolution Interferometer Sounder (S-HIS) aboard the NASA WB-57 aircraft), UK Facility for Airborne Atmospheric Measurements (FAAM) BAe146-301 aircraft insitu instruments, dedicated dropsondes, radiosondes, and ground based Raman Lidar. An overview of the JAIVEx retrieval validation plan and some initial results of this field campaign are presented.
Performance Evaluation of a Data Validation System
NASA Technical Reports Server (NTRS)
Wong, Edmond (Technical Monitor); Sowers, T. Shane; Santi, L. Michael; Bickford, Randall L.
2005-01-01
Online data validation is a performance-enhancing component of modern control and health management systems. It is essential that performance of the data validation system be verified prior to its use in a control and health management system. A new Data Qualification and Validation (DQV) Test-bed application was developed to provide a systematic test environment for this performance verification. The DQV Test-bed was used to evaluate a model-based data validation package known as the Data Quality Validation Studio (DQVS). DQVS was employed as the primary data validation component of a rocket engine health management (EHM) system developed under NASA's NGLT (Next Generation Launch Technology) program. In this paper, the DQVS and DQV Test-bed software applications are described, and the DQV Test-bed verification procedure for this EHM system application is presented. Test-bed results are summarized and implications for EHM system performance improvements are discussed.
Tissue Preservation Assessment Preliminary Results
NASA Technical Reports Server (NTRS)
Globus, Ruth; Costes, Sylvain
2017-01-01
Pre-flight groundbased testing done to prepare for the first Rodent Research mission validation flight, RR1 (Choi et al, 2016 PlosOne). We purified RNA and measured RIN values to assess quality of the samples. For protein, we measured liver enzyme activities. We tested protocol and methods of preservation to date. Here we present an overview of results related to tissue preservation from the RR1 validation mission and a summary of findings to date from investigators who received RR1 teissues various Biospecimen Sharing Program.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chao, Y.A.; Chapman, D.M.; Hill, D.J.
2000-12-15
The dynamic rod worth measurement (DRWM) technique is a method of quickly validating the predicted bank worth of control rods and shutdown rods. The DRWM analytic method is based on three-dimensional, space-time kinetic simulations of the rapid rod movements. Its measurement data is processed with an advanced digital reactivity computer. DRWM has been used as the method of bank worth validation at numerous plant startups with excellent results. The process and methodology of DRWM are described, and the measurement results of using DRWM are presented.
Fatigue Failure of Space Shuttle Main Engine Turbine Blades
NASA Technical Reports Server (NTRS)
Swanson, Gregrory R.; Arakere, Nagaraj K.
2000-01-01
Experimental validation of finite element modeling of single crystal turbine blades is presented. Experimental results from uniaxial high cycle fatigue (HCF) test specimens and full scale Space Shuttle Main Engine test firings with the High Pressure Fuel Turbopump Alternate Turbopump (HPFTP/AT) provide the data used for the validation. The conclusions show the significant contribution of the crystal orientation within the blade on the resulting life of the component, that the analysis can predict this variation, and that experimental testing demonstrates it.
Validating a Theory-Based Survey to Evaluate Teaching Effectiveness in Higher Education
ERIC Educational Resources Information Center
Amrein-Beardsley, A.; Haladyna, T.
2012-01-01
Surveys to evaluate instructor effectiveness are commonly used in higher education. Yet the survey items included are often drawn from other surveys without reference to a theory of adult learning. The authors present the results from a validation study of such a theory-based survey. They evidence that an evaluation survey based on a theory that…
ERIC Educational Resources Information Center
Lane, Kathleen Lynne; Parks, Robin J.; Kalberg, Jemma Robertson; Carter, Erik W.
2007-01-01
This article presents findings of two studies, one conducted with middle school students (n = 500) in a rural setting and a second conducted with middle school students (n = 528) in an urban setting, of the reliability and validity of the "Student Risk Screening Scale" (SRSS; Drummond, 1994). Results revealed high internal consistency, test-retest…
easyCBM® Reading Criterion Related Validity Evidence: Grades 2-5. Technical Report #1310
ERIC Educational Resources Information Center
Lai, Cheng-Fei; Alonzo, Julie; Tindal, Gerald
2013-01-01
In this technical report, we present the results of a study to gather criterion-related evidence for Grade 2-5 easyCBM® reading measures. We used correlations to examine the relation between the easyCBM® measures and other published measures with known reliability and validity evidence, including the Gates-MacGinitie Reading Tests and the Dynamic…
A New Symptom Model for Autism Cross-Validated in an Independent Sample
ERIC Educational Resources Information Center
Boomsma, A.; Van Lang, N. D. J.; De Jonge, M. V.; De Bildt, A. A.; Van Engeland, H.; Minderaa, R. B.
2008-01-01
Background: Results from several studies indicated that a symptom model other than the DSM triad might better describe symptom domains of autism. The present study focused on a) investigating the stability of a new symptom model for autism by cross-validating it in an independent sample and b) examining the invariance of the model regarding three…
Biljak, Vanja Radisic; Ozvald, Ivan; Radeljak, Andrea; Majdenic, Kresimir; Lasic, Branka; Siftar, Zoran; Lovrencic, Marijana Vucic; Flegar-Mestric, Zlata
2012-01-01
The aim of the study was to present a protocol for laboratory information system (LIS) and hospital information system (HIS) validation at the Institute of Clinical Chemistry and Laboratory Medicine of the Merkur University Hospital, Zagreb, Croatia. Validity of data traceability was checked by entering all test requests for virtual patient into HIS/LIS and printing corresponding barcoded labels that provided laboratory analyzers with the information on requested tests. The original printouts of the test results from laboratory analyzer(s) were compared with the data obtained from LIS and entered into the provided template. Transfer of data from LIS to HIS was examined by requesting all tests in HIS and creating real data in a finding generated in LIS. Data obtained from LIS and HIS were entered into a corresponding template. The main outcome measure was the accuracy of transfer obtained from laboratory analyzers and results transferred from LIS and HIS expressed as percentage (%). The accuracy of data transfer from laboratory analyzers to LIS was 99.5% and of that from LIS to HIS 100%. We presented our established validation protocol for laboratory information system and demonstrated that a system meets its intended purpose.
Validating Dimensions of Psychosis Symptomatology: Neural Correlates and 20-year Outcomes
Kotov, Roman; Foti, Dan; Li, Kaiqiao; Bromet, Evelyn J.; Hajcak, Greg; Ruggero, Camilo J.
2016-01-01
Heterogeneity of psychosis presents significant challenges for classification. Between two and 12 symptom dimensions have been proposed, and consensus is lacking. The present study sought to identify uniquely informative models by comparing the validity of these alternatives. An epidemiologic cohort of 628 first-admission inpatients with psychosis was interviewed 6 times over two decades and completed an electrophysiological assessment of error processing at year 20. We first analyzed a comprehensive set of 49 symptoms rated by interviewers at baseline, progressively extracting from one to 12 factors. Next, we compared the ability of resulting factor solutions to (a) account for concurrent neural dysfunction and (b) predict 20-year role, social, residential, and global functioning, and life satisfaction. A four-factor model showed incremental validity with all outcomes, and more complex models did not improve explanatory power. The four dimensions—reality distortion, disorganization, inexpressivity, and apathy/asociality—were replicable in 5 follow-ups, internally consistent, stable across assessments, and showed strong discriminant validity. These results reaffirm the value of separating disorganization and reality distortion, are consistent with recent findings distinguishing inexpressivity and apathy/asociality, and suggest that these four dimensions are fundamental to understanding neural abnormalities and long-term outcomes in psychosis. PMID:27819471
Validation of a French version of the pure procrastination scale (PPS).
Rebetez, Marie My Lien; Rochat, Lucien; Gay, Philippe; Van der Linden, Martial
2014-08-01
Procrastination is a widespread phenomenon that affects everyone's day-to-day life and interferes with the clinical treatment of several psychopathological states. To assess this construct, Steel (2010) developed the Pure Procrastination Scale (PPS), a short scale intended to capture the general notion of dysfunctional delay. The aim of the current study was to present a French version of this questionnaire. To this end, the 12 items of the PPS were translated into French and data were collected from an online survey in a sample of 245 French-speaking individuals from the general population. The results revealed that one item had problematic face validity; it was therefore removed. Exploratory and confirmatory analyses performed on the resulting 11-item version of the French PPS indicated that the scale was composed of two factors ("voluntary delay" and "observed delay") depending on a common, higher-order construct ("general procrastination"). Good internal consistency and test-retest reliability were found. External validity was supported by specific relationships with measures of personality traits, impulsivity, and subjective well-being. The French PPS therefore presents satisfactory psychometric properties and may be considered a reliable and valid instrument for research, teaching and clinical practice. Copyright © 2014 Elsevier Inc. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hansen, C., E-mail: hansec@uw.edu; Columbia University, New York, New York 10027; Victor, B.
We present application of three scalar metrics derived from the Biorthogonal Decomposition (BD) technique to evaluate the level of agreement between macroscopic plasma dynamics in different data sets. BD decomposes large data sets, as produced by distributed diagnostic arrays, into principal mode structures without assumptions on spatial or temporal structure. These metrics have been applied to validation of the Hall-MHD model using experimental data from the Helicity Injected Torus with Steady Inductive helicity injection experiment. Each metric provides a measure of correlation between mode structures extracted from experimental data and simulations for an array of 192 surface-mounted magnetic probes. Numericalmore » validation studies have been performed using the NIMROD code, where the injectors are modeled as boundary conditions on the flux conserver, and the PSI-TET code, where the entire plasma volume is treated. Initial results from a comprehensive validation study of high performance operation with different injector frequencies are presented, illustrating application of the BD method. Using a simplified (constant, uniform density and temperature) Hall-MHD model, simulation results agree with experimental observation for two of the three defined metrics when the injectors are driven with a frequency of 14.5 kHz.« less
Time series modeling of human operator dynamics in manual control tasks
NASA Technical Reports Server (NTRS)
Biezad, D. J.; Schmidt, D. K.
1984-01-01
A time-series technique is presented for identifying the dynamic characteristics of the human operator in manual control tasks from relatively short records of experimental data. Control of system excitation signals used in the identification is not required. The approach is a multi-channel identification technique for modeling multi-input/multi-output situations. The method presented includes statistical tests for validity, is designed for digital computation, and yields estimates for the frequency responses of the human operator. A comprehensive relative power analysis may also be performed for validated models. This method is applied to several sets of experimental data; the results are discussed and shown to compare favorably with previous research findings. New results are also presented for a multi-input task that has not been previously modeled to demonstrate the strengths of the method.
NASA Astrophysics Data System (ADS)
Kakihara, Kuniaki; Kono, Naoya; Saitoh, Kunimasa; Koshiba, Masanori
2006-11-01
This paper presents a new full-vectorial finite-element method in a local cylindrical coordinate system, to effectively analyze bending losses in photonic wires. The discretization is performed in the cross section of a three-dimensional curved waveguide, using hybrid edge/nodal elements. The solution region is truncated by anisotropic, perfectly matched layers in the cylindrical coordinate system, to deal properly with leaky modes of the waveguide. This approach is used to evaluate bending losses in silicon wire waveguides. The numerical results of the present approach are compared with results calculated with an equivalent straight waveguide approach and with reported experimental data. These comparisons together demonstrate the validity of the present approach based on the cylindrical coordinate system and also clarifies the limited validity of the equivalent straight waveguide approximation.
Time Series Modeling of Human Operator Dynamics in Manual Control Tasks
NASA Technical Reports Server (NTRS)
Biezad, D. J.; Schmidt, D. K.
1984-01-01
A time-series technique is presented for identifying the dynamic characteristics of the human operator in manual control tasks from relatively short records of experimental data. Control of system excitation signals used in the identification is not required. The approach is a multi-channel identification technique for modeling multi-input/multi-output situations. The method presented includes statistical tests for validity, is designed for digital computation, and yields estimates for the frequency response of the human operator. A comprehensive relative power analysis may also be performed for validated models. This method is applied to several sets of experimental data; the results are discussed and shown to compare favorably with previous research findings. New results are also presented for a multi-input task that was previously modeled to demonstrate the strengths of the method.
Domínguez, Evelia; Martín, Patricia; Martín-Albo, José; Núñez, Juan L; León, Jaime
2010-11-01
The aim of the present research was to translate and to analyze the psychometric properties of the Spanish version of the Satisfaction of Psychological Needs Scale, using a sample of 284 athletes (204 male and 78 female). Results of the confirmatory factor analysis confirmed the correlated three-factor structure of the scale. Furthermore, the results showed evidence of convergence validity with the Basic Psychological Needs in Exercise Scale. The predictive validity was tested using a structural equation model in which task orientation climate predicted the three basic psychological needs and these, in turn, intrinsic motivation. Likewise, we documented evidence of reliability, analyzed as internal consistency and temporal stability. Results partially support the use of the Spanish version of the scale in sports.
A content validity study of signs, symptoms and diseases/health problems expressed in LIBRAS1
Aragão, Jamilly da Silva; de França, Inacia Sátiro Xavier; Coura, Alexsandro Silva; de Sousa, Francisco Stélio; Batista, Joana D'arc Lyra; Magalhães, Isabella Medeiros de Oliveira
2015-01-01
Objectives: to validate the content of signs, symptoms and diseases/health problems expressed in LIBRAS for people with deafness Method: methodological development study, which involved 36 people with deafness and three LIBRAS specialists. The study was conducted in three stages: investigation of the signs, symptoms and diseases/health problems, referred to by people with deafness, reported in a questionnaire; video recordings of how people with deafness express, through LIBRA, the signs, symptoms and diseases/health problems; and validation of the contents of the recordings of the expressions by LIBRAS specialists. Data were processed in a spreadsheet and analyzed using univariate tables, with absolute frequencies and percentages. The validation results were analyzed using the Content Validity Index (CVI). Results: 33 expressions in LIBRAS, of signs, symptoms and diseases/health problems were evaluated, and 28 expressions obtained a satisfactory CVI (1.00). Conclusions: the signs, symptoms and diseases/health problems expressed in LIBRAS presented validity, in the study region, for health professionals, especially nurses, for use in the clinical anamnesis of the nursing consultation for people with deafness. PMID:26625991
Gunaydin, Gurkan; Citaker, Seyit; Meray, Jale; Cobanoglu, Gamze; Gunaydin, Ozge Ece; Hazar Kanik, Zeynep
2016-11-01
Validation of a self-report questionnaire. The purpose of this study was to investigate adaptation, validity, and reliability of the Turkish version of the Bournemouth Questionnaire. Low back pain is one of the most frequent disorders leading to activity limitation. This pain affects most of people in their lives. The most important point to evaluate patient's functional abilities and to decide a successful therapy procedure is to manage the assessment questionnaires precisely. One hundred ten patients with chronic low back pain were included in present study. To assess reliability, test-retest and internal consistency analyses were applied. The results of test-retest analysis were assessed by using Intraclass Correlation Coefficient method (95% confidence interval). For internal consistency, Cronbach alpha value was calculated. Validity of the questionnaire was assessed in terms of construct validity. For construct validity, factor analysis and convergent validity were tested. For convergent validity, total points of the Bournemouth Questionnaire were assessed with the total points of Quebec Back Pain Disability Scale and Roland Morris Disability Questionnaire by using Pearson correlation coefficient analysis. Cronbach alpha value was found 0.914, showing that this questionnaire has high internal consistency. The results of test-retest analysis were varying between 0.851 and 0.927, which shows that test-retest results are highly correlated. Factor analysis test indicated that this questionnaire had one factor. Pearson correlation coefficient of the Bournemouth Questionnaire with Roland Morris Disability Questionnaire was calculated 0.703 and it was found with Quebec Back Pain Disability Scale is 0.659. These results showed that the Bournemouth Questionnaire is very good correlated with Roland Morris Disability Questionnaire and Quebec Back Pain Disability Scale. The Turkish version of the Bournemouth Questionnaire is valid and reliable. 3.
Within-person adaptivity in frugal judgments from memory.
Filevich, Elisa; Horn, Sebastian S; Kühn, Simone
2017-12-22
Humans can exploit recognition memory as a simple cue for judgment. The utility of recognition depends on the interplay with the environment, particularly on its predictive power (validity) in a domain. It is, therefore, an important question whether people are sensitive to differences in recognition validity between domains. Strategic, intra-individual changes in the reliance on recognition have not been investigated so far. The present study fills this gap by scrutinizing within-person changes in using a frugal strategy, the recognition heuristic (RH), across two task domains that differed in recognition validity. The results showed adaptive changes in the reliance on recognition between domains. However, these changes were neither associated with the individual recognition validities nor with corresponding changes in these validities. These findings support a domain-adaptivity explanation, suggesting that people have broader intuitions about the usefulness of recognition across different domains that are nonetheless sufficiently robust for adaptive decision making. The analysis of metacognitive confidence reports mirrored and extended these results. Like RH use, confidence ratings covaried with task domain, but not with individual recognition validities. The changes in confidence suggest that people may have metacognitive access to information about global differences between task domains, but not to individual cue validities.
Web Based Semi-automatic Scientific Validation of Models of the Corona and Inner Heliosphere
NASA Astrophysics Data System (ADS)
MacNeice, P. J.; Chulaki, A.; Taktakishvili, A.; Kuznetsova, M. M.
2013-12-01
Validation is a critical step in preparing models of the corona and inner heliosphere for future roles supporting either or both the scientific research community and the operational space weather forecasting community. Validation of forecasting quality tends to focus on a short list of key features in the model solutions, with an unchanging order of priority. Scientific validation exposes a much larger range of physical processes and features, and as the models evolve to better represent features of interest, the research community tends to shift its focus to other areas which are less well understood and modeled. Given the more comprehensive and dynamic nature of scientific validation, and the limited resources available to the community to pursue this, it is imperative that the community establish a semi-automated process which engages the model developers directly into an ongoing and evolving validation process. In this presentation we describe the ongoing design and develpment of a web based facility to enable this type of validation of models of the corona and inner heliosphere, on the growing list of model results being generated, and on strategies we have been developing to account for model results that incorporate adaptively refined numerical grids.
On mathematicians' different standards when evaluating elementary proofs.
Inglis, Matthew; Mejia-Ramos, Juan Pablo; Weber, Keith; Alcock, Lara
2013-04-01
In this article, we report a study in which 109 research-active mathematicians were asked to judge the validity of a purported proof in undergraduate calculus. Significant results from our study were as follows: (a) there was substantial disagreement among mathematicians regarding whether the argument was a valid proof, (b) applied mathematicians were more likely than pure mathematicians to judge the argument valid, (c) participants who judged the argument invalid were more confident in their judgments than those who judged it valid, and (d) participants who judged the argument valid usually did not change their judgment when presented with a reason raised by other mathematicians for why the proof should be judged invalid. These findings suggest that, contrary to some claims in the literature, there is not a single standard of validity among contemporary mathematicians. Copyright © 2013 Cognitive Science Society, Inc.
Brief reasons for living inventory: a psychometric investigation.
Cwik, Jan Christopher; Siegmann, Paula; Willutzki, Ulrike; Nyhuis, Peter; Wolter, Marcus; Forkmann, Thomas; Glaesmer, Heide; Teismann, Tobias
2017-11-06
The present study aimed at validating the German version of the Brief Reasons for Living inventory (BRFL). Validity and reliability were established in a community (n = 339) and a clinical sample (n = 272). Convergent and discriminant validity were investigated, and confirmatory factor analyses were conducted for the complete BRFL as well as for a 10-item version excluding conditional items on child-related concerns. Furthermore, it was assessed how BRFL scores moderate the association between depression and suicide ideation. Results indicated an adequate fit of the data to the original factor structure. The total scale and the subscales of the German version of the BRFL had sufficient internal consistency, as well as good convergent and divergent validity. The BRFL demonstrated clinical utility by differentiating between participants with vs. without suicide ideation. Reasons for living proved to moderate the association between depression and suicide ideation. Results provide preliminary evidence that the BRFL may be a reliable and valid measure of adaptive reasons for living that can be used in clinic and research settings.
A validation framework for brain tumor segmentation.
Archip, Neculai; Jolesz, Ferenc A; Warfield, Simon K
2007-10-01
We introduce a validation framework for the segmentation of brain tumors from magnetic resonance (MR) images. A novel unsupervised semiautomatic brain tumor segmentation algorithm is also presented. The proposed framework consists of 1) T1-weighted MR images of patients with brain tumors, 2) segmentation of brain tumors performed by four independent experts, 3) segmentation of brain tumors generated by a semiautomatic algorithm, and 4) a software tool that estimates the performance of segmentation algorithms. We demonstrate the validation of the novel segmentation algorithm within the proposed framework. We show its performance and compare it with existent segmentation. The image datasets and software are available at http://www.brain-tumor-repository.org/. We present an Internet resource that provides access to MR brain tumor image data and segmentation that can be openly used by the research community. Its purpose is to encourage the development and evaluation of segmentation methods by providing raw test and image data, human expert segmentation results, and methods for comparing segmentation results.
Durá, Estrella; Andreu, Yolanda; Galdón, Maria José; Ibáñez, Elena; Pérez, Sandra; Ferrando, Maite; Murgui, Sergio; Martínez, Paula
2010-05-01
Emotional suppression has played an important role in the research on psychosocial factors related to cancer. It has been argued to be an important psychological factor predicting worse psychosocial adjustment in people with cancer and it may mediate health outcomes. The reference instrument in the research on emotional suppression is the Courtauld Emotional Control Scale (CECS). The present study analysed construct validity of a new Spanish adaptation of the CECS in a sample of 175 breast cancer patients. The results confirmed the proposal by Watson and Greer claiming that the CECS is composed of three subscales that measure different dimensions, but not independent, from emotional control. The present Spanish version of the CECS showed high internal consistency in each subseale as well as the total score. According to Derogatis (BSI-18) criteria, emotional suppression predicts clinically significant distress. In short, our results support the reliability, validity and utility of this Spanish adaptation of the CECS in clinical and research settings.
Classification of images acquired with colposcopy using artificial neural networks.
Simões, Priscyla W; Izumi, Narjara B; Casagrande, Ramon S; Venson, Ramon; Veronezi, Carlos D; Moretti, Gustavo P; da Rocha, Edroaldo L; Cechinel, Cristian; Ceretta, Luciane B; Comunello, Eros; Martins, Paulo J; Casagrande, Rogério A; Snoeyer, Maria L; Manenti, Sandra A
2014-01-01
To explore the advantages of using artificial neural networks (ANNs) to recognize patterns in colposcopy to classify images in colposcopy. Transversal, descriptive, and analytical study of a quantitative approach with an emphasis on diagnosis. The training test e validation set was composed of images collected from patients who underwent colposcopy. These images were provided by a gynecology clinic located in the city of Criciúma (Brazil). The image database (n = 170) was divided; 48 images were used for the training process, 58 images were used for the tests, and 64 images were used for the validation. A hybrid neural network based on Kohonen self-organizing maps and multilayer perceptron (MLP) networks was used. After 126 cycles, the validation was performed. The best results reached an accuracy of 72.15%, a sensibility of 69.78%, and a specificity of 68%. Although the preliminary results still exhibit an average efficiency, the present approach is an innovative and promising technique that should be deeply explored in the context of the present study.
Evaluation of the Validity and Reliability of the Waterlow Pressure Ulcer Risk Assessment Scale
Charalambous, Charalambos; Koulori, Agoritsa; Vasilopoulos, Aristidis; Roupa, Zoe
2018-01-01
Introduction Prevention is the ideal strategy to tackle the problem of pressure ulcers. Pressure ulcer risk assessment scales are one of the most pivotal measures applied to tackle the problem, much criticisms has been developed regarding the validity and reliability of these scales. Objective To investigate the validity and reliability of the Waterlow pressure ulcer risk assessment scale. Method The methodology used is a narrative literature review, the bibliography was reviewed through Cinahl, Pubmed, EBSCO, Medline and Google scholar, 26 scientific articles where identified. The articles where chosen due to their direct correlation with the objective under study and their scientific relevance. Results The construct and face validity of the Waterlow appears adequate, but with regards to content validity changes in the category age and gender can be beneficial. The concurrent validity cannot be assessed. The predictive validity of the Waterlow is characterized by high specificity and low sensitivity. The inter-rater reliability has been demonstrated to be inadequate, this may be due to lack of clear definitions within the categories and differentiating level of knowledge between the users. Conclusion Due to the limitations presented regarding the validity and reliability of the Waterlow pressure ulcer risk assessment scale, the scale should be used in conjunction with clinical assessment to provide optimum results. PMID:29736104
Factorial validity of the Problematic Facebook Use Scale for adolescents and young adults
Marino, Claudia; Vieno, Alessio; Altoè, Gianmarco; Spada, Marcantonio M.
2017-01-01
Background and aims Recent research on problematic Facebook use has highlighted the need to develop a specific theory-driven measure to assess this potential behavioral addiction. The aim of the present study was to examine the factorial validity of the Problematic Facebook Use Scale (PFUS) adapted from Caplan’s Generalized Problematic Internet Scale model. Methods A total of 1,460 Italian adolescents and young adults (aged 14–29 years) participated in the study. Confirmatory factor analyses were performed in order to assess the factorial validity of the scale. Results Results revealed that the factor structure of the PFUS provided a good fit to the data. Furthermore, results of the multiple group analyses supported the invariance of the model across age and gender groups. Discussion and conclusions This study provides evidence supporting the factorial validity of the PFUS. This new scale provides a theory-driven tool to assess problematic use of Facebook among male and female adolescents and young adults. PMID:28198639
The Alcohol Relapse Situation Appraisal Questionnaire: Development and Validation
Martin, Rosemarie A.; MacKinnon, Selene M.; Johnson, Jennifer E.; Myers, Mark G.; Cook, Travis A. R.; Rohsenow, Damaris J.
2011-01-01
Background The role of cognitive appraisal of the threat of alcohol relapse has received little attention. A previous instrument, the Relapse Situation Appraisal Questionnaire (RSAQ), was developed to assess cocaine users’ primary appraisal of the threat of situations posing a high risk for cocaine relapse. The purpose of the present study was to modify the RSAQ in order to measure primary appraisal in situations involving a high risk for alcohol relapse. Methods The development and psychometric properties of this instrument, the Alcohol Relapse Situation Appraisal Questionnaire (A-RSAQ), were examined with two samples of abstinent adults with alcohol abuse or dependence. Factor structure and validity were examined in Study 1 (N=104). Confirmation of the factor structure and predictive validity were assessed in Study 2 (N=161). Results Results demonstrated construct, discriminant and predictive validity and reliability of the A-RSAQ. Discussion Results support the important role of primary appraisal of degree of risk in alcohol relapse situations. PMID:21237586
Factorial validity of the Problematic Facebook Use Scale for adolescents and young adults.
Marino, Claudia; Vieno, Alessio; Altoè, Gianmarco; Spada, Marcantonio M
2017-03-01
Background and aims Recent research on problematic Facebook use has highlighted the need to develop a specific theory-driven measure to assess this potential behavioral addiction. The aim of the present study was to examine the factorial validity of the Problematic Facebook Use Scale (PFUS) adapted from Caplan's Generalized Problematic Internet Scale model. Methods A total of 1,460 Italian adolescents and young adults (aged 14-29 years) participated in the study. Confirmatory factor analyses were performed in order to assess the factorial validity of the scale. Results Results revealed that the factor structure of the PFUS provided a good fit to the data. Furthermore, results of the multiple group analyses supported the invariance of the model across age and gender groups. Discussion and conclusions This study provides evidence supporting the factorial validity of the PFUS. This new scale provides a theory-driven tool to assess problematic use of Facebook among male and female adolescents and young adults.
Validation of recent geopotential models in Tierra Del Fuego
NASA Astrophysics Data System (ADS)
Gomez, Maria Eugenia; Perdomo, Raul; Del Cogliano, Daniel
2017-10-01
This work presents a validation study of global geopotential models (GGM) in the region of Fagnano Lake, located in the southern Andes. This is an excellent area for this type of validation because it is surrounded by the Andes Mountains, and there is no terrestrial gravity or GNSS/levelling data. However, there are mean lake level (MLL) observations, and its surface is assumed to be almost equipotential. Furthermore, in this article, we propose improved geoid solutions through the Residual Terrain Modelling (RTM) approach. Using a global geopotential model, the results achieved allow us to conclude that it is possible to use this technique to extend an existing geoid model to those regions that lack any information (neither gravimetric nor GNSS/levelling observations). As GGMs have evolved, our results have improved progressively. While the validation of EGM2008 with MLL data shows a standard deviation of 35 cm, GOCO05C shows a deviation of 13 cm, similar to the results obtained on land.
Mathew, S N; Field, W E; French, B F
2011-07-01
This article reports the use of an expert panel to perform content validation of an experimental assessment process for the safety of assistive technology (AT) adopted by farmers with disabilities. The validation process was conducted by a panel of six experts experienced in the subject matter, i.e., design, use, and assessment of AT for farmers with disabilities. The exercise included an evaluation session and two focus group sessions. The evaluation session consisted of using the assessment process under consideration by the panel to evaluate a set of nine ATs fabricated by a farmer on his farm site. The expert panel also participated in the focus group sessions conducted immediately before and after the evaluation session. The resulting data were analyzed using discursive analysis, and the results were incorporated into the final assessment process. The method and the results are presented with recommendations for the use of expert panels in research projects and validation of assessment tools.
Martins, Cátia; Ferreira, Paulo Miguel; Carvalho, Raquel; Costa, Sandra Cristina; Farinha, Carlos; Azevedo, Luísa; Amorim, António; Oliveira, Manuela
2018-02-01
Obtaining a genetic profile from pieces of evidence collected at a crime scene is the primary objective of forensic laboratories. New procedures, methods, kits, software or equipment must be carefully evaluated and validated before its implementation. The constant development of new methodologies for DNA testing leads to a steady process of validation, which consists of demonstrating that the technology is robust, reproducible, and reliable throughout a defined range of conditions. The present work aims to internally validate two new retrotransposon-based kits (InnoQuant ® HY and InnoTyper ® 21), under the working conditions of the Laboratório de Polícia Científica da Polícia Judiciária (LPC-PJ). For the internal validation of InnoQuant ® HY and InnoTyper ® 21 sensitivity, repeatability, reproducibility, and mixture tests and a concordance study between these new kits and those currently in use at LPC-PJ (Quantifiler ® Duo and GlobalFiler™) were performed. The results obtained for sensitivity, repeatability, and reproducibility tests demonstrated that both InnoQuant ® HY and InnoTyper ® 21 are robust, reproducible, and reliable. The results of the concordance studies demonstrate that InnoQuant ® HY produced quantification results in nearly 29% more than Quantifiler ® Duo (indicating that this new kit is more effective in challenging samples), while the differences observed between InnoTyper ® 21 and GlobalFiler™ are not significant. Therefore, the utility of InnoTyper ® 21 has been proven, especially by the successful amplification of a greater number of complete genetic profiles (27 vs. 21). The results herein presented allowed the internal validation of both InnoQuant ® HY and InnoTyper ® 21, and their implementation in the LPC-PJ laboratory routine for the treatment of challenging samples. Copyright © 2017 Elsevier B.V. All rights reserved.
Content validity and reliability of test of gross motor development in Chilean children
Cano-Cappellacci, Marcelo; Leyton, Fernanda Aleitte; Carreño, Joshua Durán
2016-01-01
ABSTRACT OBJECTIVE To validate a Spanish version of the Test of Gross Motor Development (TGMD-2) for the Chilean population. METHODS Descriptive, transversal, non-experimental validity and reliability study. Four translators, three experts and 92 Chilean children, from five to 10 years, students from a primary school in Santiago, Chile, have participated. The Committee of Experts has carried out translation, back-translation and revision processes to determine the translinguistic equivalence and content validity of the test, using the content validity index in 2013. In addition, a pilot implementation was achieved to determine test reliability in Spanish, by using the intraclass correlation coefficient and Bland-Altman method. We evaluated whether the results presented significant differences by replacing the bat with a racket, using T-test. RESULTS We obtained a content validity index higher than 0.80 for language clarity and relevance of the TGMD-2 for children. There were significant differences in the object control subtest when comparing the results with bat and racket. The intraclass correlation coefficient for reliability inter-rater, intra-rater and test-retest reliability was greater than 0.80 in all cases. CONCLUSIONS The TGMD-2 has appropriate content validity to be applied in the Chilean population. The reliability of this test is within the appropriate parameters and its use could be recommended in this population after the establishment of normative data, setting a further precedent for the validation in other Latin American countries. PMID:26815160
Gould, Christine E; Gerolimatos, Lindsay A; Ciliberti, Caroline M; Edelstein, Barry A; Smith, Merideth D
2012-12-01
The assessment of social anxiety in late life has been examined in few studies (e.g. Gretarsdottir et al., 2004; Ciliberti et al., 2011). The present study describes the creation and initial psychometric evaluation of a new, content valid measure of social anxiety for older adults, the Older Adult Social-Evaluative Situations Questionnaire (OASES). Psychometric properties of the OASES were evaluated in a community dwelling sample of older adults (N = 137; 70.8% female). Convergent validity was established by examining the relation between the OASES and the Liebowitz Social Anxiety Scale (LSAS), Social Phobia and Anxiety Inventory (SPAI), and Beck Anxiety Inventory (BAI). Discriminant validity was established by examining the relation between the OASES and measures of depression (Geriatric Depression Scale, GDS), perceived health status (Short Form Health Survey, SF-12), and demographic variables. The validity analyses of the OASES were based on a smaller sample with n values ranging from 98 to 137 depending on missing data on each questionnaire. Internal consistency, measured by Cronbach's α, for the OASES total score was 0.96. All items on the OASES were endorsed by participants. Convergent validity was demonstrated by medium to large correlations with the SPAI, LSAS, and BAI. Support for discriminant validity was evidenced by small to medium correlations between the OASES and GDS, SF-12, and demographic variables. Evidence in support of convergent and discriminant validity of the OASES is discussed. Although the results from the present study suggest that this measure may assess anxiety in and avoidance of social situations salient to older adults, future studies are needed to further examine the psychometric properties of the OASES and replicate these results in both clinical and more diverse samples of older adults.
CosmoQuest:Using Data Validation for More Than Just Data Validation
NASA Astrophysics Data System (ADS)
Lehan, C.; Gay, P.
2016-12-01
It is often taken for granted that different scientists completing the same task (e.g. mapping geologic features) will get the same results, and data validation is often skipped or under-utilized due to time and funding constraints. Robbins et. al (2014), however, demonstrated that this is a needed step, as large variation can exist even among collaborating team members completing straight-forward tasks like marking craters. Data Validation should be much more than a simple post-project verification of results. The CosmoQuest virtual research facility employs regular data-validation for a variety of benefits, including real-time user feedback, real-time tracking to observe user activity while it's happening, and using pre-solved data to analyze users' progress and to help them retain skills. Some creativity in this area can drastically improve project results. We discuss methods of validating data in citizen science projects and outline the variety of uses for validation, which, when used properly, improves the scientific output of the project and the user experience for the citizens doing the work. More than just a tool for scientists, validation can assist users in both learning and retaining important information and skills, improving the quality and quantity of data gathered. Real-time analysis of user data can give key information in the effectiveness of the project that a broad glance would miss, and properly presenting that analysis is vital. Training users to validate their own data, or the data of others, can significantly improve the accuracy of misinformed or novice users.
Solar Dynamics Observatory (SDO) HGAS Induced Jitter
NASA Technical Reports Server (NTRS)
Liu, Alice; Blaurock, Carl; Liu, Kuo-Chia; Mule, Peter
2008-01-01
This paper presents the results of a comprehensive assessment of High Gain Antenna System induced jitter on the Solar Dynamics Observatory. The jitter prediction is created using a coupled model of the structural dynamics, optical response, control systems, and stepper motor actuator electromechanical dynamics. The paper gives an overview of the model components, presents the verification processes used to evaluate the models, describes validation and calibration tests and model-to-measurement comparison results, and presents the jitter analysis methodology and results.
Applying ergonomics to systems: some documented "lessons learned".
Hendrick, Hal W
2008-07-01
Based on evidence accumulated during the author's 45 years of professional experience, the author presents 23 important "lessons learned" regarding applying ergonomics to systems. Documented results from reported cases or other evidence are presented to validate each of these practical learning points.
A brief overview of the theory and application of the optimal control model of the human operator
NASA Technical Reports Server (NTRS)
Sheldon, B.
1979-01-01
The underlying motivation and concepts are presented, along with a review of the development and application of the model. The structure of the model is described and results validating the model are presented.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sprik, Samuel; Kurtz, Jennifer M; Ainscough, Christopher D
In this presentation, the National Renewable Energy Laboratory presented aggregated analysis results on the performance of existing hydrogen stations, including performance, operation, utilization, maintenance, safety, hydrogen quality, and cost. The U.S. Department of Energy funds technology validation work at NREL through its National Fuel Cell Technology Evaluation Center (NFCTEC).
Modeling of resistive sheets in finite element solutions
NASA Technical Reports Server (NTRS)
Jin, J. M.; Volakis, John L.; Yu, C. L.; Woo, A. C.
1992-01-01
A formulation is presented for modeling a resistive card in the context of the finite element method. The appropriate variational function is derived and for validation purposes, results are presented for the scattering by a metal-backed cavity loaded with a resistive card.
Hofman, Jelle; Samson, Roeland
2014-09-01
Biomagnetic monitoring of tree leaf deposited particles has proven to be a good indicator of the ambient particulate concentration. The objective of this study is to apply this method to validate a local-scale air quality model (ENVI-met), using 96 tree crown sampling locations in a typical urban street canyon. To the best of our knowledge, the application of biomagnetic monitoring for the validation of pollutant dispersion modeling is hereby presented for the first time. Quantitative ENVI-met validation showed significant correlations between modeled and measured results throughout the entire in-leaf period. ENVI-met performed much better at the first half of the street canyon close to the ring road (r=0.58-0.79, RMSE=44-49%), compared to second part (r=0.58-0.64, RMSE=74-102%). The spatial model behavior was evaluated by testing effects of height, azimuthal position, tree position and distance from the main pollution source on the obtained model results and magnetic measurements. Our results demonstrate that biomagnetic monitoring seems to be a valuable method to evaluate the performance of air quality models. Due to the high spatial and temporal resolution of this technique, biomagnetic monitoring can be applied anywhere in the city (where urban green is present) to evaluate model performance at different spatial scales. Copyright © 2014 Elsevier Ltd. All rights reserved.
Assessing Attachment in Psychotherapy: Validation of the Patient Attachment Coding System (PACS).
Talia, Alessandro; Miller-Bottome, Madeleine; Daniel, Sarah I F
2017-01-01
The authors present and validate the Patient Attachment Coding System (PACS), a transcript-based instrument that assesses clients' in-session attachment based on any session of psychotherapy, in multiple treatment modalities. One-hundred and sixty clients in different types of psychotherapy (cognitive-behavioural, cognitive-behavioural-enhanced, psychodynamic, relational, supportive) and from three different countries were administered the Adult Attachment Interview (AAI) prior to treatment, and one session for each client was rated with the PACS by independent coders. Results indicate strong inter-rater reliability, and high convergent validity of the PACS scales and classifications with the AAI. These results present the PACS as a practical alternative to the AAI in psychotherapy research and suggest that clinicians using the PACS can assess clients' attachment status on an ongoing basis by monitoring clients' verbal activity. These results also provide information regarding the ways in which differences in attachment status play out in therapy sessions and further the study of attachment in psychotherapy from a pre-treatment client factor to a process variable. Copyright © 2015 John Wiley & Sons, Ltd. The Patient Attachment Coding System is a valid measure of attachment that can classify clients' attachment based on any single psychotherapy transcript, in many therapeutic modalities Client differences in attachment manifest in part independently of the therapist's contributions Client adult attachment patterns are likely to affect psychotherapeutic processes. Copyright © 2015 John Wiley & Sons, Ltd.
Damin, Isabel C F; Santo, Maria A E; Hennigen, Rosmari; Vargas, Denise M
2013-01-01
In the present study, a method for the determination of mercury (Hg) in fish was validated according to ISO/IEC 17025, INMETRO (Brazil), and more recent European recommendations (Commission Decision 2007/333/EC and 2002/657/EC) for implementation in the Brazilian Residue Control Plan (NRCP) in routine applications. The parameters evaluated in the validation were investigated in detail. The results obtained for limit of detection and quantification were respectively, 2.36 and 7.88 μg kg(-1) of Hg. While the recovery varies between 90-96%. The coefficient of variation was of 4.06-8.94% for the repeatability. Furthermore, a comparison using an external proficiency testing scheme was realized. The results of method validated for the determination of the mercury in fish by Hydride generation atomic absorption spectrometry were considered suitable for implementation in routine analysis.
Toward a CFD nose-to-tail capability - Hypersonic unsteady Navier-Stokes code validation
NASA Technical Reports Server (NTRS)
Edwards, Thomas A.; Flores, Jolen
1989-01-01
Computational fluid dynamics (CFD) research for hypersonic flows presents new problems in code validation because of the added complexity of the physical models. This paper surveys code validation procedures applicable to hypersonic flow models that include real gas effects. The current status of hypersonic CFD flow analysis is assessed with the Compressible Navier-Stokes (CNS) code as a case study. The methods of code validation discussed to beyond comparison with experimental data to include comparisons with other codes and formulations, component analyses, and estimation of numerical errors. Current results indicate that predicting hypersonic flows of perfect gases and equilibrium air are well in hand. Pressure, shock location, and integrated quantities are relatively easy to predict accurately, while surface quantities such as heat transfer are more sensitive to the solution procedure. Modeling transition to turbulence needs refinement, though preliminary results are promising.
Results from an Independent View on The Validation of Safety-Critical Space Systems
NASA Astrophysics Data System (ADS)
Silva, N.; Lopes, R.; Esper, A.; Barbosa, R.
2013-08-01
The Independent verification and validation (IV&V) has been a key process for decades, and is considered in several international standards. One of the activities described in the “ESA ISVV Guide” is the independent test verification (stated as Integration/Unit Test Procedures and Test Data Verification). This activity is commonly overlooked since customers do not really see the added value of checking thoroughly the validation team work (could be seen as testing the tester's work). This article presents the consolidated results of a large set of independent test verification activities, including the main difficulties, results obtained and advantages/disadvantages for the industry of these activities. This study will support customers in opting-in or opting-out for this task in future IV&V contracts since we provide concrete results from real case studies in the space embedded systems domain.
ERIC Educational Resources Information Center
Abós Catalán, Ángel; Sevil Serrano, Javier; Julián Clemente, José Antonio; Martín-Albo Lucas, José; García-González, Luis
2018-01-01
The present study aimed to validate a Spanish-version of the Basic Psychological Needs at Work Scale (BPNWS-Sp) and to examine the associations between needs satisfaction and engagement and burnout in secondary education teachers. Using a sample of 584 secondary education teachers, the results supported the three-factor model, composite…
The validation of ozone measurements from the improved stratospheric and mesospheric sounder
NASA Technical Reports Server (NTRS)
Connor, Brian J.; Scheuer, Christopher J.; Chu, D. A.; Remedios, John J.; Marks, C. J.; Rodgers, Clive D.; Taylor, Fredric W.
1994-01-01
We present preliminary results of the validation of ozone measurements from the Improved Stratospheric and Mesospheric Sounder (ISAMS). The indications are that the ISAMS provides ozone data which generally agrees with other experiments and climatological values, except in regions of large thermal gradients or high aerosol loading. Corrections for these effects will be included in future reprocessing of the data.
ERIC Educational Resources Information Center
Gilliam, Walter S.; Reyes, Chin R.
2018-01-01
Preschool expulsion is a trending social problem. To date, this is the first study that examines the teacher decision factors behind preschool expulsions. This article presents results of the development and validation of the Preschool Expulsion Risk Measure (PERM). In a 2-phase analysis of the study, we provide evidence for the PERM's reliability…
Exploring geo-tagged photos for land cover validation with deep learning
NASA Astrophysics Data System (ADS)
Xing, Hanfa; Meng, Yuan; Wang, Zixuan; Fan, Kaixuan; Hou, Dongyang
2018-07-01
Land cover validation plays an important role in the process of generating and distributing land cover thematic maps, which is usually implemented by high cost of sample interpretation with remotely sensed images or field survey. With an increasing availability of geo-tagged landscape photos, the automatic photo recognition methodologies, e.g., deep learning, can be effectively utilised for land cover applications. However, they have hardly been utilised in validation processes, as challenges remain in sample selection and classification for highly heterogeneous photos. This study proposed an approach to employ geo-tagged photos for land cover validation by using the deep learning technology. The approach first identified photos automatically based on the VGG-16 network. Then, samples for validation were selected and further classified by considering photos distribution and classification probabilities. The implementations were conducted for the validation of the GlobeLand30 land cover product in a heterogeneous area, western California. Experimental results represented promises in land cover validation, given that GlobeLand30 showed an overall accuracy of 83.80% with classified samples, which was close to the validation result of 80.45% based on visual interpretation. Additionally, the performances of deep learning based on ResNet-50 and AlexNet were also quantified, revealing no substantial differences in final validation results. The proposed approach ensures geo-tagged photo quality, and supports the sample classification strategy by considering photo distribution, with accuracy improvement from 72.07% to 79.33% compared with solely considering the single nearest photo. Consequently, the presented approach proves the feasibility of deep learning technology on land cover information identification of geo-tagged photos, and has a great potential to support and improve the efficiency of land cover validation.
Dynamic Time Warping compared to established methods for validation of musculoskeletal models.
Gaspar, Martin; Welke, Bastian; Seehaus, Frank; Hurschler, Christof; Schwarze, Michael
2017-04-11
By means of Multi-Body musculoskeletal simulation, important variables such as internal joint forces and moments can be estimated which cannot be measured directly. Validation can ensued by qualitative or by quantitative methods. Especially when comparing time-dependent signals, many methods do not perform well and validation is often limited to qualitative approaches. The aim of the present study was to investigate the capabilities of the Dynamic Time Warping (DTW) algorithm for comparing time series, which can quantify phase as well as amplitude errors. We contrast the sensitivity of DTW with other established metrics: the Pearson correlation coefficient, cross-correlation, the metric according to Geers, RMSE and normalized RMSE. This study is based on two data sets, where one data set represents direct validation and the other represents indirect validation. Direct validation was performed in the context of clinical gait-analysis on trans-femoral amputees fitted with a 6 component force-moment sensor. Measured forces and moments from amputees' socket-prosthesis are compared to simulated forces and moments. Indirect validation was performed in the context of surface EMG measurements on a cohort of healthy subjects with measurements taken of seven muscles of the leg, which were compared to simulated muscle activations. Regarding direct validation, a positive linear relation between results of RMSE and nRMSE to DTW can be seen. For indirect validation, a negative linear relation exists between Pearson correlation and cross-correlation. We propose the DTW algorithm for use in both direct and indirect quantitative validation as it correlates well with methods that are most suitable for one of the tasks. However, in DV it should be used together with methods resulting in a dimensional error value, in order to be able to interpret results more comprehensible. Copyright © 2017 Elsevier Ltd. All rights reserved.
Towards natural language question generation for the validation of ontologies and mappings.
Ben Abacha, Asma; Dos Reis, Julio Cesar; Mrabet, Yassine; Pruski, Cédric; Da Silveira, Marcos
2016-08-08
The increasing number of open-access ontologies and their key role in several applications such as decision-support systems highlight the importance of their validation. Human expertise is crucial for the validation of ontologies from a domain point-of-view. However, the growing number of ontologies and their fast evolution over time make manual validation challenging. We propose a novel semi-automatic approach based on the generation of natural language (NL) questions to support the validation of ontologies and their evolution. The proposed approach includes the automatic generation, factorization and ordering of NL questions from medical ontologies. The final validation and correction is performed by submitting these questions to domain experts and automatically analyzing their feedback. We also propose a second approach for the validation of mappings impacted by ontology changes. The method exploits the context of the changes to propose correction alternatives presented as Multiple Choice Questions. This research provides a question optimization strategy to maximize the validation of ontology entities with a reduced number of questions. We evaluate our approach for the validation of three medical ontologies. We also evaluate the feasibility and efficiency of our mappings validation approach in the context of ontology evolution. These experiments are performed with different versions of SNOMED-CT and ICD9. The obtained experimental results suggest the feasibility and adequacy of our approach to support the validation of interconnected and evolving ontologies. Results also suggest that taking into account RDFS and OWL entailment helps reducing the number of questions and validation time. The application of our approach to validate mapping evolution also shows the difficulty of adapting mapping evolution over time and highlights the importance of semi-automatic validation.
NIH Toolbox Cognition Battery (NIHTB-CB): list sorting test to measure working memory.
Tulsky, David S; Carlozzi, Noelle; Chiaravalloti, Nancy D; Beaumont, Jennifer L; Kisala, Pamela A; Mungas, Dan; Conway, Kevin; Gershon, Richard
2014-07-01
The List Sorting Working Memory Test was designed to assess working memory (WM) as part of the NIH Toolbox Cognition Battery. List Sorting is a sequencing task requiring children and adults to sort and sequence stimuli that are presented visually and auditorily. Validation data are presented for 268 participants ages 20 to 85 years. A subset of participants (N=89) was retested 7 to 21 days later. As expected, the List Sorting Test had moderately high correlations with other measures of working memory and executive functioning (convergent validity) but a low correlation with a test of receptive vocabulary (discriminant validity). Furthermore, List Sorting demonstrates expected changes over the age span and has excellent test-retest reliability. Collectively, these results provide initial support for the construct validity of the List Sorting Working Memory Measure as a measure of working memory. However, the relationship between the List Sorting Test and general executive function has yet to be determined.
Whitney, Kriscinda A; Davis, Jeremy J; Shepard, Polly H; Herman, Steven M
2008-01-01
The present study represents a replication and extension of the original Response Bias Scale (RBS) validation study. In addition to examining the relationship between the Test of Memory Malingering (TOMM), RBS, and several other well-researched Minnesota Multiphasic Personality Inventory 2 (MMPI-2) validity scales (i.e., F, Fb, Fp, and the Fake Bad Scale), the present study also included the recently developed Infrequency Post-Traumatic Stress Disorder Scale and the Henry-Heilbronner Index (HHI) of the MMPI-2. Findings from this retrospective data analysis (N=46) demonstrated the superiority of the RBS, and to a certain extent the HHI, over other MMPI-2 validity scales in predicting TOMM failure within the outpatient Veterans Affairs population. Results of the current study confirm the clinical utility of the RBS and suggest that, particularly if the MMPI-2 is an existing part of the neuropsychological assessment, examination of RBS scores is an efficient means of detecting negative response bias.
Oliveira, Giselly Oseni Barbosa; Cavalcante, Luana Duarte Wanderley; Pagliuca, Lorita Marlena Freitag; de Almeida, Paulo César; Rebouças, Cristiana Brasil de Almeida
2016-01-01
ABSTRACT Objective: to validate an educational text in the context of Sexually Transmitted Diseases (STD) for visually impaired persons, making it accessible to this population. Method: a validation study, in a virtual environment. Data collection occurred from May to September 2012 by emailing the subjects, and was composed by seven content experts about STDs. Analysis was based on the considerations of the experts about Objectives, Structure and Presentation, and Relevance. Results: on the Objectives and Structure and Presentation blocks, 77 (84.6%) and 48 (85.7%) were fully adequate or appropriate, respectively. In the Relevance block, items 3.2 - Allows transfer and generalization of learning, and 3.5 - Portrays aspects needed to clarify the family, showed bad agreement indices of 0.42 and 0.57, respectively. The analysis was followed by reformulating the text according to the relevant suggestions. Conclusion: the text was validated regarding the content of sexually transmitted diseases. A total of 35 stanzas were removed and nine others included, following the recommendations of the experts. PMID:27556880
NIH Toolbox Cognition Battery (NIHTB-CB): The List Sorting Test to Measure Working Memory
Tulsky, David S.; Carlozzi, Noelle; Chiaravalloti, Nancy D.; Beaumont, Jennifer L.; Kisala, Pamela A.; Mungas, Dan; Conway, Kevin; Gershon, Richard
2015-01-01
The List Sorting Working Memory Test was designed to assess working memory (WM) as part of the NIH Toolbox Cognition Battery. List Sorting is a sequencing task requiring children and adults to sort and sequence stimuli that are presented visually and auditorily. Validation data are presented for 268 participants ages 20 to 85 years. A subset of participants (N=89) was retested 7 to 21 days later. As expected, the List Sorting Test had moderately high correlations with other measures of working memory and executive functioning (convergent validity) but a low correlation with a test of receptive vocabulary (discriminant validity). Furthermore, List Sorting demonstrates expected changes over the age span and has excellent test-retest reliability. Collectively, these results provide initial support the construct validity of the List Sorting Working Memory Measure as a measure of working memory. However, the relation between the List Sorting Test and general executive function has yet to be determined. PMID:24959983
Conceptual Design of a Hypervelocity Asteroid Intercept Vehicle (HAIV) Flight Validation Mission
NASA Technical Reports Server (NTRS)
Barbee, Brent W.; Wie, Bong; Steiner, Mark; Getzandanner, Kenneth
2013-01-01
In this paper we present a detailed overview of the MDL study results and subsequent advances in the design of GNC algorithms for accurate terminal guidance during hypervelocity NEO intercept. The MDL study produced a conceptual con guration of the two-body HAIV and its subsystems; a mission scenario and trajectory design for a notional flight validation mission to a selected candidate target NEO; GNC results regarding the ability of the HAIV to reliably intercept small (50 m) NEOs at hypervelocity (typically greater than 10 km/s); candidate launch vehicle selection; a notional operations concept and cost estimate for the flight validation mission; and a list of topics to address during the remainder of our NIAC Phase II study.
Improvement of Simulation Method in Validation of Software of the Coordinate Measuring Systems
NASA Astrophysics Data System (ADS)
Nieciąg, Halina
2015-10-01
Software is used in order to accomplish various tasks at each stage of the functioning of modern measuring systems. Before metrological confirmation of measuring equipment, the system has to be validated. This paper discusses the method for conducting validation studies of a fragment of software to calculate the values of measurands. Due to the number and nature of the variables affecting the coordinate measurement results and the complex character and multi-dimensionality of measurands, the study used the Monte Carlo method of numerical simulation. The article presents an attempt of possible improvement of results obtained by classic Monte Carlo tools. The algorithm LHS (Latin Hypercube Sampling) was implemented as alternative to the simple sampling schema of classic algorithm.
External validation of a Cox prognostic model: principles and methods
2013-01-01
Background A prognostic model should not enter clinical practice unless it has been demonstrated that it performs a useful role. External validation denotes evaluation of model performance in a sample independent of that used to develop the model. Unlike for logistic regression models, external validation of Cox models is sparsely treated in the literature. Successful validation of a model means achieving satisfactory discrimination and calibration (prediction accuracy) in the validation sample. Validating Cox models is not straightforward because event probabilities are estimated relative to an unspecified baseline function. Methods We describe statistical approaches to external validation of a published Cox model according to the level of published information, specifically (1) the prognostic index only, (2) the prognostic index together with Kaplan-Meier curves for risk groups, and (3) the first two plus the baseline survival curve (the estimated survival function at the mean prognostic index across the sample). The most challenging task, requiring level 3 information, is assessing calibration, for which we suggest a method of approximating the baseline survival function. Results We apply the methods to two comparable datasets in primary breast cancer, treating one as derivation and the other as validation sample. Results are presented for discrimination and calibration. We demonstrate plots of survival probabilities that can assist model evaluation. Conclusions Our validation methods are applicable to a wide range of prognostic studies and provide researchers with a toolkit for external validation of a published Cox model. PMID:23496923
Reconceptualising the external validity of discrete choice experiments.
Lancsar, Emily; Swait, Joffre
2014-10-01
External validity is a crucial but under-researched topic when considering using discrete choice experiment (DCE) results to inform decision making in clinical, commercial or policy contexts. We present the theory and tests traditionally used to explore external validity that focus on a comparison of final outcomes and review how this traditional definition has been empirically tested in health economics and other sectors (such as transport, environment and marketing) in which DCE methods are applied. While an important component, we argue that the investigation of external validity should be much broader than a comparison of final outcomes. In doing so, we introduce a new and more comprehensive conceptualisation of external validity, closely linked to process validity, that moves us from the simple characterisation of a model as being or not being externally valid on the basis of predictive performance, to the concept that external validity should be an objective pursued from the initial conceptualisation and design of any DCE. We discuss how such a broader definition of external validity can be fruitfully used and suggest innovative ways in which it can be explored in practice.
Harizanova, Stanislava N; Mateva, Nonka G; Tarnovska, Tanya Ch
2016-12-01
Burnout syndrome is a phenomenon that seems to be studied globally in relation to all types of populations. The staff in the system of correctional institutions in Bulgaria, however, is oddly left out of this tendency. There is no standardized model in Bulgaria that can be used to detect possible susceptibility to professional burnout. The methods available at present only register the irreversible changes that have already set in the functioning of the individual. V. Boyko's method for burnout assessment allows clinicians to use individual approach to patients and affords easy comparability of results with data from other psychodiagnostic instruments. Adaptation of the assessment instruments to fit the specificities of a study population (linguistic, ethno-cultural, etc.) is obligatory so that the instrument could be correctly used and yield valid results. Validation is one of the most frequently used technique to achieve this. The aim of the present study was to adapt and validate V. Boyko's burnout inventory for diagnosing burnout and assessment of the severity of the burnout syndrome in correctional officers. We conducted a pilot study with 50 officers working in the Plovdiv Regional Correction Facility by test-retest survey performed at an interval of 2 to 4 months. All participants completed the adapted questionnaire translated into Bulgarian voluntarily and anonymously. Statistical analysis was performed using SPSS v.17. We found a mild-to-strong statistically significant correlation (P<0.01) across all subscales between the most frequently used questionnaire for assessing the burnout syndrome, the Maslach Burnout Inventory, and the tool we propose here. The high Cronbach's α coefficient (α=0.94) and Spearman-Brown coefficient (rsb=0.86), and the low mean between-item correlation (r=0.30) demonstrated the instrument's good reliability and validity. With the validation herein presented we offer a highly reliable Bulgarian variant of Boyko's method for burnout assessment and research.
Pope, Kevin L.; Hamel, Martin J.; Pegg, Mark A.; Spurgeon, Jonathan J.
2016-01-01
Age information derived from calcified structures is commonly used to estimate recruitment, growth, and mortality for fish populations. Validation of daily or annual marks on age structures is often assumed, presumably due to a lack of general knowledge concerning the status of age validation studies. Therefore, the current status of freshwater fish age validation studies was summarized to show where additional effort is needed, and increase the accessibility of validation studies to researchers. In total, 1351 original peer-reviewed articles were reviewed from freshwater systems that studied age in fish. Periodicity and age validation studies were found for 88 freshwater species comprising 21 fish families. The number of age validation studies has increased over the last 30 years following previous calls for more research; however, few species have validated structures spanning all life stages. In addition, few fishes of conservation concern have validated ageing structures. A prioritization framework, using a combination of eight characteristics, is offered to direct future age validation studies and close the validation information gap. Additional study, using the offered prioritization framework, and increased availability of published studies that incorporate uncertainty when presenting research results dealing with age information are needed.
Validation plays the role of a "bridge" in connecting remote sensing research and applications
NASA Astrophysics Data System (ADS)
Wang, Zhiqiang; Deng, Ying; Fan, Yida
2018-07-01
Remote sensing products contribute to improving earth observations over space and time. Uncertainties exist in products of different levels; thus, validation of these products before and during their applications is critical. This study discusses the meaning of validation in depth and proposes a new definition of reliability for use with such products. In this context, validation should include three aspects: a description of the relevant uncertainties, quantitative measurement results and a qualitative judgment that considers the needs of users. A literature overview is then presented evidencing improvements in the concepts associated with validation. It shows that the root mean squared error (RMSE) is widely used to express accuracy; increasing numbers of remote sensing products have been validated; research institutes contribute most validation efforts; and sufficient validation studies encourage the application of remote sensing products. Validation plays a connecting role in the distribution and application of remote sensing products. Validation connects simple remote sensing subjects with other disciplines, and it connects primary research with practical applications. Based on the above findings, it is suggested that validation efforts that include wider cooperation among research institutes and full consideration of the needs of users should be promoted.
NASA Technical Reports Server (NTRS)
Moes, Timothy R.
2009-01-01
The principal objective of the Supersonics Project is to develop and validate multidisciplinary physics-based predictive design, analysis and optimization capabilities for supersonic vehicles. For aircraft, the focus will be on eliminating the efficiency, environmental and performance barriers to practical supersonic flight. Previous flight projects found that a shaped sonic boom could propagate all the way to the ground (F-5 SSBD experiment) and validated design tools for forebody shape modifications (F-5 SSBD and Quiet Spike experiments). The current project, Lift and Nozzle Change Effects on Tail Shock (LaNCETS) seeks to obtain flight data to develop and validate design tools for low-boom tail shock modifications. Attempts will be made to alter the shock structure of NASA's NF-15B TN/837 by changing the lift distribution by biasing the canard positions, changing the plume shape by under- and over-expanding the nozzles, and changing the plume shape using thrust vectoring. Additional efforts will measure resulting shocks with a probing aircraft (F-15B TN/836) and use the results to validate and update predictive tools. Preliminary flight results are presented and are available to provide truth data for developing and validating the CFD tools required to design low-boom supersonic aircraft.
Why do verification and validation?
Hu, Kenneth T.; Paez, Thomas L.
2016-02-19
In this discussion paper, we explore different ways to assess the value of verification and validation (V&V) of engineering models. We first present a literature review on the value of V&V and then use value chains and decision trees to show how value can be assessed from a decision maker's perspective. In this context, the value is what the decision maker is willing to pay for V&V analysis with the understanding that the V&V results are uncertain. As a result, the 2014 Sandia V&V Challenge Workshop is used to illustrate these ideas.
Airborne Two-Micron Double-Pulse IPDA Lidar Validation for Carbon Dioxide Measurements Over Land
NASA Astrophysics Data System (ADS)
Refaat, Tamer F.; Singh, Upendra N.; Yu, Jirong; Petros, Mulugeta; Remus, Ruben; Ismail, Syed
2018-04-01
An airborne double-pulse 2-μm Integrated Path Differential Absorption (IPDA) lidar has been developed at NASA LaRC for measuring atmospheric CO2. IPDA was validated using NASA B-200 aircraft over land and ocean under different conditions. IPDA evaluation for land vegetation returns, during full day background conditions, are presented. IPDA CO2 measurements compare well with model results driven from on-board insitu sensor data. These results also indicate that CO2 measurement bias is consistent with that from ocean surface returns.
Langley 16- Ft. Transonic Tunnel Pressure Sensitive Paint System
NASA Technical Reports Server (NTRS)
Sprinkle, Danny R.; Obara, Clifford J.; Amer, Tahani R.; Leighty, Bradley D.; Carmine, Michael T.; Sealey, Bradley S.; Burkett, Cecil G.
2001-01-01
This report describes the NASA Langley 16-Ft. Transonic Tunnel Pressure Sensitive Paint (PSP) System and presents results of a test conducted June 22-23, 2000 in the tunnel to validate the PSP system. The PSP system provides global surface pressure measurements on wind tunnel models. The system was developed and installed by PSP Team personnel of the Instrumentation Systems Development Branch and the Advanced Measurement and Diagnostics Branch. A discussion of the results of the validation test follows a description of the system and a description of the test.
Cues Resulting in Desire for Sexual Activity in Women
McCall, Katie; Meston, Cindy
2010-01-01
Introduction A number of questionnaires have been created to assess levels of sexual desire in women, but to our knowledge, there are currently no validated measures for assessing cues that result in sexual desire. A questionnaire of this nature could be useful for both clinicians and researchers, because it considers the contextual nature of sexual desire and it draws attention to individual differences in factors that can contribute to sexual desire. Aim The aim of the present study was to create a multidimensional assessment tool of cues for sexual desire in women that is validated in women with and without hypoactive sexual desire disorder (HSDD). Methods Factor analyses conducted on both an initial sample (N = 874) and a community sample (N = 138) resulted in the Cues for Sexual Desire Scale (CSDS) which included four factors: (i) Emotional Bonding Cues; (ii) Erotic/ Explicit Cues; (iii) Visual/Proximity Cues; and (iv) Implicit/Romantic Cues. Main Outcome Measures Scale construction of cues associated with sexual desire and differences between women with and without sexual dysfunction. Results The CSDS demonstrated good reliability and validity and was able to detect significant differences between women with and without HSDD. Results from regression analyses indicated that both marital status and level of sexual functioning predicted scores on the CSDS. The CSDS provided predictive validity for the Female Sexual Function Index desire and arousal domain scores, and increased cues were related to a higher reported frequency of sexual activity in women. Conclusions The findings from the present study provide valuable information regarding both internal and external triggers that can result in sexual desire for women. We believe that the CSDS could be beneficial in therapeutic settings to help identify cues that do and do not facilitate sexual desire in women with clinically diagnosed desire difficulties. PMID:16942529
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ricci, P., E-mail: paolo.ricci@epfl.ch; Riva, F.; Theiler, C.
In the present work, a Verification and Validation procedure is presented and applied showing, through a practical example, how it can contribute to advancing our physics understanding of plasma turbulence. Bridging the gap between plasma physics and other scientific domains, in particular, the computational fluid dynamics community, a rigorous methodology for the verification of a plasma simulation code is presented, based on the method of manufactured solutions. This methodology assesses that the model equations are correctly solved, within the order of accuracy of the numerical scheme. The technique to carry out a solution verification is described to provide a rigorousmore » estimate of the uncertainty affecting the numerical results. A methodology for plasma turbulence code validation is also discussed, focusing on quantitative assessment of the agreement between experiments and simulations. The Verification and Validation methodology is then applied to the study of plasma turbulence in the basic plasma physics experiment TORPEX [Fasoli et al., Phys. Plasmas 13, 055902 (2006)], considering both two-dimensional and three-dimensional simulations carried out with the GBS code [Ricci et al., Plasma Phys. Controlled Fusion 54, 124047 (2012)]. The validation procedure allows progress in the understanding of the turbulent dynamics in TORPEX, by pinpointing the presence of a turbulent regime transition, due to the competition between the resistive and ideal interchange instabilities.« less
NASA Astrophysics Data System (ADS)
McKague, D. S.; Ruf, C. S.; Balasubramaniam, R.; Clarizia, M. P.
2017-12-01
The Cyclone Global Navigation Satellite System (CYGNSS) mission, launched in December of 2016, provides all-weather observations of sea surface winds. Using GPS-based bistatic reflectometry, the CYGNSS satellites can estimate sea surface winds even through a hurricane eye wall. This, combined with the high temporal resolution of the CYGNSS constellation (median revisit time of 2.8 hours), yields unprecedented ability to estimate hurricane strength winds. While there are a number of other sources of sea surface wind estimates, such as buoys, dropsondes, passive and active microwave from aircraft and satellite, and models, the combination of all-weather, high accuracy, short revisit time, high spatial coverage, and continuous operation of the CYGNSS mission enables significant advances in the understanding, monitoring, and prediction of cyclones. Validating CYGNSS wind retrievals over the bulk of the global wind speed distribution, which peaks at around 7 meters per second, is relatively straight-forward, requiring spatial-temporal matching of observations with independent sources (such as those mentioned above). Validating CYGNSS wind retrievals for "high" winds (> 20 meters per second), though, is problematic. Such winds occur only in intense storms. While infrequent, making validation opportunities also infrequent and problematic due to their intense nature, such storms are important to study because of the high potential for damage and loss of life. This presentation will describe the efforts of the CYGNSS Calibration/Validation team to gather measurements of high sea surface winds for development and validation of the CYGNSS geophysical model function (GMF), which forms the basis of retrieving winds from CYGNSS observations. The bulk of these observations come from buoy measurements as well as aircraft ("hurricane hunter") measurements from passive microwave and dropsondes. These data are matched in space and time to CYGNSS observations for training of the CYGNSS GMF and an independent set is used for validation of the resulting high wind speed retrievals. In addition to describing the general validation process, results from matchups over the 2017 hurricane season will be presented.
Hoseinzadeh, Hamidreza; Taghipour, Ali; Yousefi, Mahdi
2018-01-01
Background Development of a questionnaire based on the resources of Persian traditional medicine seems necessary. One of the problems faced by practitioners of traditional medicine is the different opinions regarding the diagnosis of general temperament or temperament of member. One of the reasons is the lack of validity tools, and it has led to difficulties in training the student of traditional medicine and the treatment of patients. The differences in the detection methods, have given rise to several treatment methods. Objective The present study aimed to develop a questionnaire and standard software for diagnosis of gastrointestinal dystemperaments. Methods The present research is a tool developing study which included 8 stages of developing the items, determining the statements based on items, assessing the face validity, assessing the content validity, assessing the reliability, rating the items, developing a software for calculation of the total score of the questionnaire named GDS v.1.1, and evaluating the concurrent validity using statistical tests including Cronbach’s alpha coefficient, Cohen’s kappa coefficient. Results Based on the results, 112 notes including 62 symptoms were extracted from resources, and 58 items were obtained from in-person interview sessions with a panel of experts. A statement was selected for each item and, after merging a number of statements, a total of 49 statements were finally obtained. By calculating the score of statement impact and determining the content validity, respectively, 6 and 10 other items were removed from the list of statements. Standardized Cronbach’s alpha for this questionnaire was obtained 0.795 and its concurrent validity was equal to 0.8. Conclusion A quantitative tool was developed for diagnosis and examination of gastrointestinal dystemperaments. The developed questionnaire is adequately reliable and valid for this purpose. In addition, the software can be used for clinical diagnosis. PMID:29629060
Exploring rationality in schizophrenia.
Revsbech, Rasmus; Mortensen, Erik Lykke; Owen, Gareth; Nordgaard, Julie; Jansson, Lennart; Sæbye, Ditte; Flensborg-Madsen, Trine; Parnas, Josef
2015-06-01
Empirical studies of rationality (syllogisms) in patients with schizophrenia have obtained different results. One study found that patients reason more logically if the syllogism is presented through an unusual content. To explore syllogism-based rationality in schizophrenia. Thirty-eight first-admitted patients with schizophrenia and 38 healthy controls solved 29 syllogisms that varied in presentation content (ordinary v. unusual) and validity (valid v. invalid). Statistical tests were made of unadjusted and adjusted group differences in models adjusting for intelligence and neuropsychological test performance. Controls outperformed patients on all syllogism types, but the difference between the two groups was only significant for valid syllogisms presented with unusual content. However, when adjusting for intelligence and neuropsychological test performance, all group differences became non-significant. When taking intelligence and neuropsychological performance into account, patients with schizophrenia and controls perform similarly on syllogism tests of rationality. None. © The Royal College of Psychiatrists 2015. This is an open access article distributed under the terms of the Creative Commons Non-Commercial, No Derivatives (CC BY-NC-ND) licence.
Aubin, Michèle; Verreault, René; Savoie, Maryse; LeMay, Sylvie; Hadjistavropoulos, Thomas; Fillion, Lise; Beaulieu, Marie; Viens, Chantal; Bergeron, Rénald; Vézina, Lucie; Misson, Lucie; Fuchs-Lacelle, Shannon
2008-01-01
This study presents the validation of the French Canadian version (PACLSAC-F) of the Pain Assessment Checklist for Seniors with Limited Ability to Communicate (PACSLAC). Unlike the published validation of the English version of the PACSLAC, which was validated retrospectively, the French version was validated prospectively. The PACSLAC-F was completed by nurses working in long-term care facilities after observing 86 seniors, with severe cognitive impairment, in calm, painful or distressing but non-painful situations. The test-retest and inter-observer reliability, the internal consistency, and the discriminent validity were found to be satisfactory. To evaluate the convergent validity with the DOLOPLUS-2 and the clinical relevance of the PACSLAC, it was also completed by nurses during their work shift, with 26 additional patients, for three days per week during a period of four weeks. These results encourage us to test the PACSLAC in a comprehensive program of pain management targeting this population.
NASA Astrophysics Data System (ADS)
L'Hostis, V.; Brunet, C.; Poupard, O.; Petre-Lazar, I.
2006-11-01
Several ageing models are available for the prediction of the mechanical consequences of rebar corrosion. They are used for service life prediction of reinforced concrete structures. Concerning corrosion diagnosis of reinforced concrete, some Non Destructive Testing (NDT) tools have been developed, and have been in use for some years. However, these developments require validation on existing concrete structures. The French project “Benchmark des Poutres de la Rance” contributes to this aspect. It has two main objectives: (i) validation of mechanical models to estimate the influence of rebar corrosion on the load bearing capacity of a structure, (ii) qualification of the use of the NDT results to collect information on steel corrosion within reinforced-concrete structures. Ten French and European institutions from both academic research laboratories and industrial companies contributed during the years 2004 and 2005. This paper presents the project that was divided into several work packages: (i) the reinforced concrete beams were characterized from non-destructive testing tools, (ii) the mechanical behaviour of the beams was experimentally tested, (iii) complementary laboratory analysis were performed and (iv) finally numerical simulations results were compared to the experimental results obtained with the mechanical tests.
Validation of Extended MHD Models using MST RFP Plasmas
NASA Astrophysics Data System (ADS)
Jacobson, C. M.; Chapman, B. E.; Craig, D.; McCollam, K. J.; Sovinec, C. R.
2016-10-01
Significant effort has been devoted to improvement of computational models used in fusion energy sciences. Rigorous validation of these models is necessary in order to increase confidence in their ability to predict the performance of future devices. MST is a well diagnosed reversed-field pinch (RFP) capable of operation over a wide range of parameters. In particular, the Lundquist number S, a key parameter in resistive magnetohydrodynamics (MHD), can be varied over a wide range and provide substantial overlap with MHD RFP simulations. MST RFP plasmas are simulated using both DEBS, a nonlinear single-fluid visco-resistive MHD code, and NIMROD, a nonlinear extended MHD code, with S ranging from 104 to 5 ×104 for single-fluid runs, with the magnetic Prandtl number Pm = 1 . Experiments with plasma current IP ranging from 60 kA to 500 kA result in S from 4 ×104 to 8 ×106 . Validation metric comparisons are presented, focusing on how magnetic fluctuations b scale with S. Single-fluid NIMROD results give S b - 0.21 , and experiments give S b - 0.28 for the dominant m = 1 , n = 6 mode. Preliminary two-fluid NIMROD results are also presented. Work supported by US DOE.
Personality and job performance: the Big Five revisited.
Hurtz, G M; Donovan, J J
2000-12-01
Prior meta-analyses investigating the relation between the Big 5 personality dimensions and job performance have all contained a threat to construct validity, in that much of the data included within these analyses was not derived from actual Big 5 measures. In addition, these reviews did not address the relations between the Big 5 and contextual performance. Therefore, the present study sought to provide a meta-analytic estimate of the criterion-related validity of explicit Big 5 measures for predicting job performance and contextual performance. The results for job performance closely paralleled 2 of the previous meta-analyses, whereas analyses with contextual performance showed more complex relations among the Big 5 and performance. A more critical interpretation of the Big 5-performance relationship is presented, and suggestions for future research aimed at enhancing the validity of personality predictors are provided.
Statistical Anomalies of Bitflips in SRAMs to Discriminate SBUs From MCUs
NASA Astrophysics Data System (ADS)
Clemente, Juan Antonio; Franco, Francisco J.; Villa, Francesca; Baylac, Maud; Rey, Solenne; Mecha, Hortensia; Agapito, Juan A.; Puchner, Helmut; Hubert, Guillaume; Velazco, Raoul
2016-08-01
Recently, the occurrence of multiple events in static tests has been investigated by checking the statistical distribution of the difference between the addresses of the words containing bitflips. That method has been successfully applied to Field Programmable Gate Arrays (FPGAs) and the original authors indicate that it is also valid for SRAMs. This paper presents a modified methodology that is based on checking the XORed addresses with bitflips, rather than on the difference. Irradiation tests on CMOS 130 & 90 nm SRAMs with 14-MeV neutrons have been performed to validate this methodology. Results in high-altitude environments are also presented and cross-checked with theoretical predictions. In addition, this methodology has also been used to detect modifications in the organization of said memories. Theoretical predictions have been validated with actual data provided by the manufacturer.
Betz, C; Mannsdörfer, K; Bischoff, S C
2013-10-01
Irritable bowel syndrome (IBS) is a functional gastrointestinal disorder characterised by abdominal pain, associated with stool abnormalities and changes in stool consistency. Diagnosis of IBS is based on characteristic symptoms and exclusion of other gastrointestinal diseases. A number of questionnaires exist to assist diagnosis and assessment of severity of the disease. One of these is the irritable bowel syndrome - severity scoring system (IBS-SSS). The IBS-SSS was validated 1997 in its English version. In the present study, the IBS-SSS has been validated in German language. To do this, a cohort of 60 patients with IBS according to the Rome III criteria, was compared with a control group of healthy individuals (n = 38). We studied sensitivity and reproducibility of the score, as well as the sensitivity to detect changes of symptom severity. The results of the German validation largely reflect the results of the English validation. The German version of the IBS-SSS is also a valid, meaningful and reproducible questionnaire with a high sensitivity to assess changes in symptom severity, especially in IBS patients with moderate symptoms. It is unclear if the IBS-SSS is also a valid questionnaire in IBS patients with severe symptoms because this group of patients was not studied. © Georg Thieme Verlag KG Stuttgart · New York.
ERIC Educational Resources Information Center
Renshaw, Tyler L.
2017-01-01
The present study reports on the initial validation of the eight-item version of the Avoidance and Fusion Questionnaire for Youth (AFQ-Y8) as a school mental health screener for identifying clinical-level depression and anxiety caseness within a sample of urban high school students (N = 219). Results indicated that responses to the AFQ-Y8 yielded…
Moya-Suárez, Ana Belén; Morales-Asencio, José Miguel; Aranda-Gallardo, Marta; Enríquez de Luna-Rodríguez, Margarita; Canca-Sánchez, José Carlos
2017-11-01
The main objective of this work is the development and psychometric validation of an instrument to evaluate nurses' adherence to the main recommendations issued for preventing pressure ulcers. An instrument was designed based on the main recommendations for the prevention of pressure ulcers published in various clinical practice guides. Subsequently, it was proceeded to evaluate the face and content validity of the instrument by an expert group. It has been applied to 249 Spanish nurses took part in a cross-sectional study to obtain a psychometric evaluation (reliability and construct validity) of the instrument. The study data were compiled from June 2015 to July 2016. From the results of the psychometric analysis, a final 18-item, 4-factor questionnaire was derived, which explained 60.5% of the variance and presented the following optimal indices of fit (CMIN/DF: 1.40 p < 0.001; GFI: 0.93; NFI: 0.92; CFI: 0.98; TLI: 0.97; RMSEA: 0.04 (90% CI 0.025-0.054). The results obtained show that the instrument presents suitable psychometric properties for evaluating nurses' adherence to recommendations for the prevention of pressure ulcers. Copyright © 2017 Tissue Viability Society. Published by Elsevier Ltd. All rights reserved.
Validating dimensions of psychosis symptomatology: Neural correlates and 20-year outcomes.
Kotov, Roman; Foti, Dan; Li, Kaiqiao; Bromet, Evelyn J; Hajcak, Greg; Ruggero, Camilo J
2016-11-01
Heterogeneity of psychosis presents significant challenges for classification. Between 2 and 12 symptom dimensions have been proposed, and consensus is lacking. The present study sought to identify uniquely informative models by comparing the validity of these alternatives. An epidemiologic cohort of 628 first-admission inpatients with psychosis was interviewed 6 times over 2 decades and completed an electrophysiological assessment of error processing at year 20. We first analyzed a comprehensive set of 49 symptoms rated by interviewers at baseline, progressively extracting from 1 to 12 factors. Next, we compared the ability of resulting factor solutions to (a) account for concurrent neural dysfunction and (b) predict 20-year role, social, residential, and global functioning, and life satisfaction. A four-factor model showed incremental validity with all outcomes, and more complex models did not improve explanatory power. The 4 dimensions-reality distortion, disorganization, inexpressivity, and apathy/asociality-were replicable in 5 follow-ups, internally consistent, stable across assessments, and showed strong discriminant validity. These results reaffirm the value of separating disorganization and reality distortion, are consistent with recent findings distinguishing inexpressivity and apathy/asociality, and suggest that these 4 dimensions are fundamental to understanding neural abnormalities and long-term outcomes in psychosis. (PsycINFO Database Record (c) 2016 APA, all rights reserved).
Zakzanis, Konstantine K; Gammada, Emnet; Jeffay, Eliyas
2012-01-01
The present study examined the relationship between multiple neuropsychological symptom validity tests (SVTs) and psychological presentation. More formally, we set out to determine if performance on neuropsychological SVTs was related to psychological symptom credibility and which specific neuropsychological SVTs were most associated with noncredible psychological presentation. Archival records from 106 litigating examinees were utilized in this study. Our results illustrate that neuropsychological SVTs are modestly related to psychological symptom credibility and that specific neuropsychological SVTs are variably associated to this end. We conclude that when multiple, but not independent, neuropsychological SVTs are employed within the context of a neuropsychological examination, they do have clinical utility as it relates to credibility of psychological presentation and these constructs do share variance reciprocally in clinically meaningful ways. When independently employed, however, the observed relationship is modest at best. Hence, to place clinical opinion on firmer scientific grounds within the context of a neuropsychological examination, multiple cognitive SVTs, in hand with psychological test instruments that include validity indexes, are essential to derive opinion that is based on science rather than faith in the instance of litigation when an incentive to manifest disability for the sake of an external reward holds probable.
Macarthur, Roy; Feinberg, Max; Bertheau, Yves
2010-01-01
A method is presented for estimating the size of uncertainty associated with the measurement of products derived from genetically modified organisms (GMOs). The method is based on the uncertainty profile, which is an extension, for the estimation of uncertainty, of a recent graphical statistical tool called an accuracy profile that was developed for the validation of quantitative analytical methods. The application of uncertainty profiles as an aid to decision making and assessment of fitness for purpose is also presented. Results of the measurement of the quantity of GMOs in flour by PCR-based methods collected through a number of interlaboratory studies followed the log-normal distribution. Uncertainty profiles built using the results generally give an expected range for measurement results of 50-200% of reference concentrations for materials that contain at least 1% GMO. This range is consistent with European Network of GM Laboratories and the European Union (EU) Community Reference Laboratory validation criteria and can be used as a fitness for purpose criterion for measurement methods. The effect on the enforcement of EU labeling regulations is that, in general, an individual analytical result needs to be < 0.45% to demonstrate compliance, and > 1.8% to demonstrate noncompliance with a labeling threshold of 0.9%.
Vařeková, Radka Svobodová; Jaiswal, Deepti; Sehnal, David; Ionescu, Crina-Maria; Geidl, Stanislav; Pravda, Lukáš; Horský, Vladimír; Wimmerová, Michaela; Koča, Jaroslav
2014-07-01
Structure validation has become a major issue in the structural biology community, and an essential step is checking the ligand structure. This paper introduces MotiveValidator, a web-based application for the validation of ligands and residues in PDB or PDBx/mmCIF format files provided by the user. Specifically, MotiveValidator is able to evaluate in a straightforward manner whether the ligand or residue being studied has a correct annotation (3-letter code), i.e. if it has the same topology and stereochemistry as the model ligand or residue with this annotation. If not, MotiveValidator explicitly describes the differences. MotiveValidator offers a user-friendly, interactive and platform-independent environment for validating structures obtained by any type of experiment. The results of the validation are presented in both tabular and graphical form, facilitating their interpretation. MotiveValidator can process thousands of ligands or residues in a single validation run that takes no more than a few minutes. MotiveValidator can be used for testing single structures, or the analysis of large sets of ligands or fragments prepared for binding site analysis, docking or virtual screening. MotiveValidator is freely available via the Internet at http://ncbr.muni.cz/MotiveValidator. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.
Conceptual Design of a Flight Validation Mission for a Hypervelocity Asteroid Intercept Vehicle
NASA Technical Reports Server (NTRS)
Barbee, Brent W.; Wie, Bong; Steiner, Mark; Getzandanner, Kenneth
2013-01-01
Near-Earth Objects (NEOs) are asteroids and comets whose orbits approach or cross Earth s orbit. NEOs have collided with our planet in the past, sometimes to devastating effect, and continue to do so today. Collisions with NEOs large enough to do significant damage to the ground are fortunately infrequent, but such events can occur at any time and we therefore need to develop and validate the techniques and technologies necessary to prevent the Earth impact of an incoming NEO. In this paper we provide background on the hazard posed to Earth by NEOs and present the results of a recent study performed by the NASA/Goddard Space Flight Center s Mission Design Lab (MDL) in collaboration with Iowa State University s Asteroid Deflection Research Center (ADRC) to design a flight validation mission for a Hypervelocity Asteroid Intercept Vehicle (HAIV) as part of a Phase 2 NASA Innovative Advanced Concepts (NIAC) research project. The HAIV is a two-body vehicle consisting of a leading kinetic impactor and trailing follower carrying a Nuclear Explosive Device (NED) payload. The HAIV detonates the NED inside the crater in the NEO s surface created by the lead kinetic impactor portion of the vehicle, effecting a powerful subsurface detonation to disrupt the NEO. For the flight validation mission, only a simple mass proxy for the NED is carried in the HAIV. Ongoing and future research topics are discussed following the presentation of the detailed flight validation mission design results produced in the MDL.
Effect of individual shades on reliability and validity of observers in colour matching.
Lagouvardos, P E; Diamanti, H; Polyzois, G
2004-06-01
The effect of individual shades in shade guides, on the reliability and validity of measurements in a colour matching process is very important. Observer's agreement on shades and sensitivity/specificity of shades, can give us an estimate of shade's effect on observer's reliability and validity. In the present study, a group of 16 students, matched 15 shades of a Kulzer's guide and 10 human incisors to Kulzer's and/or Vita's shade tabs, in 4 different tests. The results showed shades I, B10, C40, A35 and A10 were those with the highest reliability and validity values. In conclusion, a) the matching process with shades of different materials was not accurate enough, b) some shades produce a more reliable and valid match than others and c) teeth are matched with relative difficulty.
Empirical validation of an agent-based model of wood markets in Switzerland
Hilty, Lorenz M.; Lemm, Renato; Thees, Oliver
2018-01-01
We present an agent-based model of wood markets and show our efforts to validate this model using empirical data from different sources, including interviews, workshops, experiments, and official statistics. Own surveys closed gaps where data was not available. Our approach to model validation used a variety of techniques, including the replication of historical production amounts, prices, and survey results, as well as a historical case study of a large sawmill entering the market and becoming insolvent only a few years later. Validating the model using this case provided additional insights, showing how the model can be used to simulate scenarios of resource availability and resource allocation. We conclude that the outcome of the rigorous validation qualifies the model to simulate scenarios concerning resource availability and allocation in our study region. PMID:29351300
DOE Office of Scientific and Technical Information (OSTI.GOV)
Silverman, T. J.; Bosco, N.; Kurtz, S.
2012-03-01
Concentrating photovoltaic (CPV) cell assemblies can fail due to thermomechanical fatigue in the die-attach layer. In this presentation, we show the latest results from our computational model of thermomechanical fatigue. The model is used to estimate the relative lifetime of cell assemblies exposed to various temperature histories consistent with service and with accelerated testing. We also present early results from thermal cycling experiments designed to help validate the computational model.
Validation of Rain Rate Retrievals for the Airborne Hurricane Imaging Radiometer (HIRAD)
NASA Technical Reports Server (NTRS)
Jacob, Maria; Salemirad, Matin; Jones, Linwood; Biswas, Sayak; Cecil, Daniel
2015-01-01
NASA's Global Hawk aircraft (AV1)has two microwave sensors: the passive Hurricane Imaging Radiometer (HIRAD), and the active High-altitude Imaging Wind and Rain Airborne Profiler(HIWRAP). Results are presented for a rain measurement validation opportunity that occurred in 2013, when the AV1 flew over a tropical squall-line that was simultaneously observed by the Tampa NEXRAD radar. During this experiment, Global Hawk made 3 passes over the rapidly propagating thunderstorm, while the TAMPA NEXRAD performed volume scans every 5 minutes. In this poster, the three-way inter-comparison of HIRAD Tb (base temperature), HIWRAP dbZ (decibels relative to equivalent reflectivity) and NEXRAD rain rate imagery are presented. Also, observed HIRAD Tbs are compared with theoretical radiative transfer model results using HIWRAP Rain Rates.
Creating, generating and comparing random network models with NetworkRandomizer.
Tosadori, Gabriele; Bestvina, Ivan; Spoto, Fausto; Laudanna, Carlo; Scardoni, Giovanni
2016-01-01
Biological networks are becoming a fundamental tool for the investigation of high-throughput data in several fields of biology and biotechnology. With the increasing amount of information, network-based models are gaining more and more interest and new techniques are required in order to mine the information and to validate the results. To fill the validation gap we present an app, for the Cytoscape platform, which aims at creating randomised networks and randomising existing, real networks. Since there is a lack of tools that allow performing such operations, our app aims at enabling researchers to exploit different, well known random network models that could be used as a benchmark for validating real, biological datasets. We also propose a novel methodology for creating random weighted networks, i.e. the multiplication algorithm, starting from real, quantitative data. Finally, the app provides a statistical tool that compares real versus randomly computed attributes, in order to validate the numerical findings. In summary, our app aims at creating a standardised methodology for the validation of the results in the context of the Cytoscape platform.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dixon, David A.; Hughes, Henry Grady
In this paper, we expand on previous validation work by Dixon and Hughes. That is, we present a more complete suite of validation results with respect to to the well-known Lockwood energy deposition experiment. Lockwood et al. measured energy deposition in materials including beryllium, carbon, aluminum, iron, copper, molybdenum, tantalum, and uranium, for both single- and multi-layer 1-D geometries. Source configurations included mono-energetic, mono-directional electron beams with energies of 0.05-MeV, 0.1-MeV, 0.3- MeV, 0.5-MeV, and 1-MeV, in both normal and off-normal angles of incidence. These experiments are particularly valuable for validating electron transport codes, because they are closely represented bymore » simulating pencil beams incident on 1-D semi-infinite slabs with and without material interfaces. Herein, we include total energy deposition and energy deposition profiles for the single-layer experiments reported by Lockwood et al. (a more complete multi-layer validation will follow in another report).« less
Aerobraking strategies for the sample of comet coma earth return mission
NASA Astrophysics Data System (ADS)
Abe, Takashi; Kawaguchi, Jun'ichiro; Uesugi, Kuninori; Yen, Chen-Wan L.
The results of a study to the validate the applicability of the aerobraking concept to the SOCCER (sample of comet coma earth return) mission using a six-DOF computer simulation of the aerobraking process are presented. The SOCCER spacecraft and the aerobraking scenario and power supply problem are briefly described. Results are presented for the spin effect, payload exposure problem, and sun angle effect.
Aerobraking strategies for the sample of comet coma earth return mission
NASA Technical Reports Server (NTRS)
Abe, Takashi; Kawaguchi, Jun'ichiro; Uesugi, Kuninori; Yen, Chen-Wan L.
1990-01-01
The results of a study to the validate the applicability of the aerobraking concept to the SOCCER (sample of comet coma earth return) mission using a six-DOF computer simulation of the aerobraking process are presented. The SOCCER spacecraft and the aerobraking scenario and power supply problem are briefly described. Results are presented for the spin effect, payload exposure problem, and sun angle effect.
Gayzur, Nora D.; Langley, Linda K.; Kelland, Chris; Wyman, Sara V.; Saville, Alyson L.; Ciernia, Annie T.; Padmanabhan, Ganesh
2013-01-01
Shifting visual focus based on the perceived gaze direction of another person is one form of joint attention. The present study investigated if this socially-relevant form of orienting is reflexive and whether it is influenced by age. Green and Woldorff (2012) argued that rapid cueing effects (faster responses to validly-cued targets than to invalidly-cued targets) were limited to conditions in which a cue overlapped in time with a target. They attributed slower responses following invalid cues to the time needed to resolve incongruent spatial information provided by the concurrently-presented cue and target. The present study examined orienting responses of young (18-31 years), young-old (60-74 years), and old-old adults (75-91 years) following uninformative central gaze cues that overlapped in time with the target (Experiment 1) or that were removed prior to target presentation (Experiment 2). When the cue and target overlapped, all three groups localized validly-cued targets faster than invalidly-cued targets, and validity effects emerged earlier for the two younger groups (at 100 ms post cue onset) than for the old-old group (at 300 ms post cue onset). With a short duration cue (Experiment 2), validity effects developed rapidly (by 100 ms) for all three groups, suggesting that validity effects resulted from reflexive orienting based on gaze cue information rather than from cue-target conflict. Thus, although old-old adults may be slow to disengage from persistent gaze cues, attention continues to be reflexively guided by gaze cues late in life. PMID:24170377
NASA Astrophysics Data System (ADS)
Hawes, Frederick T.; Berk, Alexander; Richtsmeier, Steven C.
2016-05-01
A validated, polarimetric 3-dimensional simulation capability, P-MCScene, is being developed by generalizing Spectral Sciences' Monte Carlo-based synthetic scene simulation model, MCScene, to include calculation of all 4 Stokes components. P-MCScene polarimetric optical databases will be generated by a new version (MODTRAN7) of the government-standard MODTRAN radiative transfer algorithm. The conversion of MODTRAN6 to a polarimetric model is being accomplished by (1) introducing polarimetric data, by (2) vectorizing the MODTRAN radiation calculations and by (3) integrating the newly revised and validated vector discrete ordinate model VDISORT3. Early results, presented here, demonstrate a clear pathway to the long-term goal of fully validated polarimetric models.
Discriminant Validity Assessment: Use of Fornell & Larcker criterion versus HTMT Criterion
NASA Astrophysics Data System (ADS)
Hamid, M. R. Ab; Sami, W.; Mohmad Sidek, M. H.
2017-09-01
Assessment of discriminant validity is a must in any research that involves latent variables for the prevention of multicollinearity issues. Fornell and Larcker criterion is the most widely used method for this purpose. However, a new method has emerged for establishing the discriminant validity assessment through heterotrait-monotrait (HTMT) ratio of correlations method. Therefore, this article presents the results of discriminant validity assessment using these methods. Data from previous study was used that involved 429 respondents for empirical validation of value-based excellence model in higher education institutions (HEI) in Malaysia. From the analysis, the convergent, divergent and discriminant validity were established and admissible using Fornell and Larcker criterion. However, the discriminant validity is an issue when employing the HTMT criterion. This shows that the latent variables under study faced the issue of multicollinearity and should be looked into for further details. This also implied that the HTMT criterion is a stringent measure that could detect the possible indiscriminant among the latent variables. In conclusion, the instrument which consisted of six latent variables was still lacking in terms of discriminant validity and should be explored further.
Validity of Caregivers’ Reports on Head Trauma Due to Falls in Young Children Aged Less than 2 Years
Fujiwara, Takeo; Nagase, Hiroaki; Okuyama, Makiko; Hoshino, Takahiro; Aoki, Kazunori; Nagashima, Tastuya; Nakamura, Hajime
2010-01-01
Objective: The clinical presentations of head trauma due to falls among young children aged less than 2 years are controversial, particularly in Japan, as the history of trauma recounted by a caretaker is not always reliable. The purpose of this study was to assess the validity of caregiver’s reports on head trauma due to falls in young children aged less than 2 years in Japan. Methods: All patients <2 years of age presenting with head trauma resulting from a fall who were admitted to 3 children’s hospitals in Japan from January 2001 to December 2005 were retrospectively reviewed (N = 58). The clinical presentations were compared among groups categorized by the heights from which the patient fell (short (≤120 cm) or long (>120 cm)) and the surface on which the patient landed (carpet, tatami (Japanese mattress), hardwood floor, or concrete). Results: Patients who suffered short falls were more likely to present with subdural hemorrhage (SDH) than those who suffered long falls (74% and 40%, respectively, P = 0.027). More specifically, 62% of short falls showed SDH indicative of shaken baby syndrome (e.g. multilayer SDH). Neurological symptoms, cyanosis, and SDH were more commonly observed in patients who landed on carpeted or tatami surfaces than in those who landed on hardwood or concrete floors. Conclusions: Short falls and landing on soft surfaces resulted in the presentation of severer clinical symptoms than did long falls and landing on hard surfaces, suggesting that the validity of caretakers’ reports on infant or young children’s head trauma due to falls is low. Further research is warranted to investigate the cause of infant head trauma due to falls. PMID:23761991
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wendt, Fabian F; Yu, Yi-Hsiang; Nielsen, Kim
This is the first joint reference paper for the Ocean Energy Systems (OES) Task 10 Wave Energy Converter modeling verification and validation group. The group is established under the OES Energy Technology Network program under the International Energy Agency. OES was founded in 2001 and Task 10 was proposed by Bob Thresher (National Renewable Energy Laboratory) in 2015 and approved by the OES Executive Committee EXCO in 2016. The kickoff workshop took place in September 2016, wherein the initial baseline task was defined. Experience from similar offshore wind validation/verification projects (OC3-OC5 conducted within the International Energy Agency Wind Task 30)more » [1], [2] showed that a simple test case would help the initial cooperation to present results in a comparable way. A heaving sphere was chosen as the first test case. The team of project participants simulated different numerical experiments, such as heave decay tests and regular and irregular wave cases. The simulation results are presented and discussed in this paper.« less
Continued Development and Validation of Methods for Spheromak Simulation
NASA Astrophysics Data System (ADS)
Benedett, Thomas
2015-11-01
The HIT-SI experiment has demonstrated stable sustainment of spheromaks; determining how the underlying physics extrapolate to larger, higher-temperature regimes is of prime importance in determining the viability of the inductively-driven spheromak. It is thus prudent to develop and validate a computational model that can be used to study current results and provide an intermediate step between theory and future experiments. A zero-beta Hall-MHD model has shown good agreement with experimental data at 14.5 kHz injector operation. Experimental observations at higher frequency, where the best performance is achieved, indicate pressure effects are important and likely required to attain quantitative agreement with simulations. Efforts to extend the existing validation to high frequency (~ 36-68 kHz) using an extended MHD model implemented in the PSI-TET arbitrary-geometry 3D MHD code will be presented. Results from verification of the PSI-TET extended MHD model using the GEM magnetic reconnection challenge will also be presented along with investigation of injector configurations for future SIHI experiments using Taylor state equilibrium calculations. Work supported by DoE.
Intercepting real and simulated falling objects: what is the difference?
Baurès, Robin; Benguigui, Nicolas; Amorim, Michel-Ange; Hecht, Heiko
2009-10-30
The use of virtual reality is nowadays common in many studies in the field of human perception and movement control, particularly in interceptive actions. However, the ecological validity of the simulation is often taken for granted without having been formally established. If participants were to perceive the real situation and its virtual equivalent in a different fashion, the generalization of the results obtained in virtual reality to real life would be highly questionable. We tested the ecological validity of virtual reality in this context by comparing the timing of interceptive actions based upon actually falling objects and their simulated counterparts. The results show very limited differences as a function of whether participants were confronted with a real ball or a simulation thereof. And when present, such differences were limited to the first trial only. This result validates the use of virtual reality when studying interceptive actions of accelerated stimuli.
Sentiment analysis of political communication: combining a dictionary approach with crowdcoding.
Haselmayer, Martin; Jenny, Marcelo
2017-01-01
Sentiment is important in studies of news values, public opinion, negative campaigning or political polarization and an explosive expansion of digital textual data and fast progress in automated text analysis provide vast opportunities for innovative social science research. Unfortunately, tools currently available for automated sentiment analysis are mostly restricted to English texts and require considerable contextual adaption to produce valid results. We present a procedure for collecting fine-grained sentiment scores through crowdcoding to build a negative sentiment dictionary in a language and for a domain of choice. The dictionary enables the analysis of large text corpora that resource-intensive hand-coding struggles to cope with. We calculate the tonality of sentences from dictionary words and we validate these estimates with results from manual coding. The results show that the crowdbased dictionary provides efficient and valid measurement of sentiment. Empirical examples illustrate its use by analyzing the tonality of party statements and media reports.
Substantiation Data for Advanced Beaded and Tubular Structural Panels. Volume 3: Testing
NASA Technical Reports Server (NTRS)
Hedges, P. C.; Greene, B. E.
1974-01-01
The test program is described, which was conducted to provide the necessary experimental data to verify the design and analysis methods developed for beaded and tubular panels. Test results are summarized and presented for all local buckling and full size panel tests. Selected representative test data from each of these tests is presented in detail. The results of this program established a valid analysis and design procedure for circular tube panels. Test results from three other configurations show deformational modes which are not adequately accounted for in the present analyses.
On the validity of cosmic no-hair conjecture in an anisotropic inationary model
NASA Astrophysics Data System (ADS)
Do, Tuan Q.
2018-05-01
We will present main results of our recent investigations on the validity of cosmic no-hair conjecture proposed by Hawking and his colleagues long time ago in the framework of an anisotropic inflationary model proposed by Kanno, Soda, and Watanabe. As a result, we will show that the cosmic no-hair conjecture seems to be generally violated in the Kanno-Soda- Watanabe model for both canonical and non-canonical scalar fields due to the existence of a non-trivial coupling term between scalar and electromagnetic fields. However, we will also show that the validity of the cosmic no-hair conjecture will be ensured once a unusual scalar field called the phantom field, whose kinetic energy term is negative definite, is introduced into the Kanno-Soda-Watanabe model.
Opportunistic Mobility Support for Resource Constrained Sensor Devices in Smart Cities
Granlund, Daniel; Holmlund, Patrik; Åhlund, Christer
2015-01-01
A multitude of wireless sensor devices and technologies are being developed and deployed in cities all over the world. Sensor applications in city environments may include highly mobile installations that span large areas which necessitates sensor mobility support. This paper presents and validates two mechanisms for supporting sensor mobility between different administrative domains. Firstly, EAP-Swift, an Extensible Authentication Protocol (EAP)-based sensor authentication protocol is proposed that enables light-weight sensor authentication and key generation. Secondly, a mechanism for handoffs between wireless sensor gateways is proposed. We validate both mechanisms in a real-life study that was conducted in a smart city environment with several fixed sensors and moving gateways. We conduct similar experiments in an industry-based anechoic Long Term Evolution (LTE) chamber with an ideal radio environment. Further, we validate our results collected from the smart city environment against the results produced under ideal conditions to establish best and real-life case scenarios. Our results clearly validate that our proposed mechanisms can facilitate efficient sensor authentication and handoffs while sensors are roaming in a smart city environment. PMID:25738767
Ares I-X Range Safety Simulation Verification and Analysis Independent Validation and Verification
NASA Technical Reports Server (NTRS)
Merry, Carl M.; Tarpley, Ashley F.; Craig, A. Scott; Tartabini, Paul V.; Brewer, Joan D.; Davis, Jerel G.; Dulski, Matthew B.; Gimenez, Adrian; Barron, M. Kyle
2011-01-01
NASA s Ares I-X vehicle launched on a suborbital test flight from the Eastern Range in Florida on October 28, 2009. To obtain approval for launch, a range safety final flight data package was generated to meet the data requirements defined in the Air Force Space Command Manual 91-710 Volume 2. The delivery included products such as a nominal trajectory, trajectory envelopes, stage disposal data and footprints, and a malfunction turn analysis. The Air Force s 45th Space Wing uses these products to ensure public and launch area safety. Due to the criticality of these data, an independent validation and verification effort was undertaken to ensure data quality and adherence to requirements. As a result, the product package was delivered with the confidence that independent organizations using separate simulation software generated data to meet the range requirements and yielded consistent results. This document captures Ares I-X final flight data package verification and validation analysis, including the methodology used to validate and verify simulation inputs, execution, and results and presents lessons learned during the process
Opportunistic mobility support for resource constrained sensor devices in smart cities.
Granlund, Daniel; Holmlund, Patrik; Åhlund, Christer
2015-03-02
A multitude of wireless sensor devices and technologies are being developed and deployed in cities all over the world. Sensor applications in city environments may include highly mobile installations that span large areas which necessitates sensor mobility support. This paper presents and validates two mechanisms for supporting sensor mobility between different administrative domains. Firstly, EAP-Swift, an Extensible Authentication Protocol (EAP)-based sensor authentication protocol is proposed that enables light-weight sensor authentication and key generation. Secondly, a mechanism for handoffs between wireless sensor gateways is proposed. We validate both mechanisms in a real-life study that was conducted in a smart city environment with several fixed sensors and moving gateways. We conduct similar experiments in an industry-based anechoic Long Term Evolution (LTE) chamber with an ideal radio environment. Further, we validate our results collected from the smart city environment against the results produced under ideal conditions to establish best and real-life case scenarios. Our results clearly validate that our proposed mechanisms can facilitate efficient sensor authentication and handoffs while sensors are roaming in a smart city environment.
Validation of the AATSR L2 GSST product with in situ measurements from the M-AERI
NASA Astrophysics Data System (ADS)
Noyes, E.; Minnett, P.; Remedios, J.; Mannerings, B.; Corlett, G.; Edwards, M.; Llewellyn-Jones, D.
Precise, in situ, measurements of skin Sea Surface Temperature (SSST) have been obtained over the Eastern Caribbean Sea, using the Marine Atmospheric Emitted Radiance Interferometer (M-AERI) deployed onboard the Explorer of the Seas cruise ship. These measurements provide a near-continuous SSST dataset and have been used to validate the Advanced Along-Track Scanning Radiometer (AATSR) Level 2 operational dual-view Gridded Sea Surface Temperature (GSST) product over the area. The (A)ATSR instrument has a unique design in that it has both a nadir- and forward-view, allowing the Earth's surface to be viewed along two different atmospheric path lengths and enabling an improved atmospheric correction to be made when retrieving measurements of SST. The infrared radiometer also uses an innovative and exceptionally stable on-board calibration system, which, together with actively cooled detectors, gives exceptionally high radiometric sensitivity and precision, enabling SSTs to be retrieved to within ± 0.3 K (1-sigma limit). The unprecedented number of measurements provided by the M-AERI project enables us to validate the AATSR SST products on a scale that has not been possible with its two predecessors, ATSR-1 and ATSR-2. Validation results obtained between September 2002 and September 2003 are presented and indicate that, although the AATSR appears to measure slightly warm (circa + 0.14 K), the GSST product is accurate to within 0.28-0.41 K (Root Mean Square difference) in this geographical region, depending on the validation criteria used. We also present the results of further investigations into a number of validation points that do not fall within the target ± 0.3 K accuracy zone.
Howle, Timothy C; Dimmock, James A; Whipp, Peter R; Jackson, Ben
2015-06-01
With the aim of advancing the literature on impression management in physical activity settings, we developed a theoretically derived 2 by 2 instrument that was designed to measure different types of context-specific self-presentation motives. Following item generation and expert review (Study 1), the instrument was completed by 206 group exercise class attendees (Study 2) and 463 high school physical education students (Study 3). Our analyses supported the intended factor structure (i.e., reflecting acquisitive-agentic, acquisitive-communal, protective-agentic, and protective-communal motives). We found some support for construct validity, and the self-presentation motives were associated with variables of theoretical and applied interest (e.g., impression motivation and construction, social anxiety, social and achievement goals, efficacy beliefs, engagement). Taken together, the results indicate that the Self-presentation Motives for Physical Activity Questionnaire (SMPAQ) may be useful for measuring various types of self-presentation motives in physical activity settings.
Development, Validation, and Implementation of a Clinic Nurse Staffing Guideline.
Deeken, Debra Jean; Wakefield, Douglas; Kite, Cora; Linebaugh, Jeanette; Mitchell, Blair; Parkinson, Deidre; Misra, Madhukar
2017-10-01
Ensuring that the level of nurse staffing used to care for patients is appropriate to the setting and service intensity is essential for high-quality and cost-effective care. This article describes the development, validation, and implementation of the clinic technical skills permission list developed specifically to guide nurse staffing decisions in physician clinics of an academic medical center. Results and lessons learned in using this staffing guideline are presented.
Development, Validation, and Application of OSSEs at NASA/GMAO
NASA Technical Reports Server (NTRS)
Errico, Ronald; Prive, Nikki
2015-01-01
During the past several years, NASA Goddard's Global Modeling and Assimilation Office (GMAO) has been developing a framework for conducting Observing System Simulation Experiments (OSSEs). The motivation and design of that framework will be described and a sample of validation results presented. Fundamentals issues will be highlighted, particularly the critical importance of appropriately simulating system errors. Some problems that have just arisen in the newest experimental system will also be mentioned.
Quality Control and Analysis of Microphysical Data Collected in TRMM Aircraft Validation Experiments
NASA Technical Reports Server (NTRS)
Heymsfield, Andrew J.
2004-01-01
This report summarizes our efforts on the funded project 'Quality Control and Analysis of Microphysical Data Collected in TRMM Airborne Validation Experiments', NASA NAG5-9663, Andrew Heymsfield, P. I. We begin this report by summarizing our activities in FY2000-FY2004. We then present some highlights of our work. The last part of the report lists the publications that have resulted from our funding through this grant.
Goyens, C; Jamet, C; Ruddick, K G
2013-09-09
The present study provides an extensive overview of red and near infra-red (NIR) spectral relationships found in the literature and used to constrain red or NIR-modeling schemes in current atmospheric correction (AC) algorithms with the aim to improve water-leaving reflectance retrievals, ρw(λ), in turbid waters. However, most of these spectral relationships have been developed with restricted datasets and, subsequently, may not be globally valid, explaining the need of an accurate validation exercise. Spectral relationships are validated here with turbid in situ data for ρw(λ). Functions estimating ρw(λ) in the red were only valid for moderately turbid waters (ρw(λNIR) < 3.10(-3)). In contrast, bounding equations used to limit ρw(667) retrievals according to the water signal at 555 nm, appeared to be valid for all turbidity ranges presented in the in situ dataset. In the NIR region of the spectrum, the constant NIR reflectance ratio suggested by Ruddick et al. (2006) (Limnol. Oceanogr. 51, 1167-1179), was valid for moderately to very turbid waters (ρw(λNIR) < 10(-2)) while the polynomial function, initially developed by Wang et al. (2012) (Opt. Express 20, 741-753) with remote sensing reflectances over the Western Pacific, was also valid for extremely turbid waters (ρw(λNIR) > 10(-2)). The results of this study suggest to use the red bounding equations and the polynomial NIR function to constrain red or NIR-modeling schemes in AC processes with the aim to improve ρw(λ) retrievals where current AC algorithms fail.
Design for validation: An approach to systems validation
NASA Technical Reports Server (NTRS)
Carter, William C.; Dunham, Janet R.; Laprie, Jean-Claude; Williams, Thomas; Howden, William; Smith, Brian; Lewis, Carl M. (Editor)
1989-01-01
Every complex system built is validated in some manner. Computer validation begins with review of the system design. As systems became too complicated for one person to review, validation began to rely on the application of adhoc methods by many individuals. As the cost of the changes mounted and the expense of failure increased, more organized procedures became essential. Attempts at devising and carrying out those procedures showed that validation is indeed a difficult technical problem. The successful transformation of the validation process into a systematic series of formally sound, integrated steps is necessary if the liability inherent in the future digita-system-based avionic and space systems is to be minimized. A suggested framework and timetable for the transformtion are presented. Basic working definitions of two pivotal ideas (validation and system life-cyle) are provided and show how the two concepts interact. Many examples are given of past and present validation activities by NASA and others. A conceptual framework is presented for the validation process. Finally, important areas are listed for ongoing development of the validation process at NASA Langley Research Center.
González-Chordá, Víctor M; Mena-Tudela, Desirée; Salas-Medina, Pablo; Cervera-Gasch, Agueda; Orts-Cortés, Isabel; Maciá-Soler, Loreto
2016-02-01
Writing a bachelor thesis (BT) is the last step to obtain a nursing degree. In order to perform an effective assessment of a nursing BT, certain reliable and valid tools are required. To develop and validate a 3-rubric system (drafting process, dissertation, and viva) to assess final year nursing students' BT. A multi-disciplinary study of content validity and psychometric properties. The study was carried out between December 2014 and July 2015. Nursing Degree at Universitat Jaume I. Spain. Eleven experts (9 nursing professors and 2 education professors from 6 different universities) took part in the development and content validity stages. Fifty-two theses presented during the 2014-2015 academic year were included by consecutive sampling of cases in order to study the psychometric properties. First, a group of experts was created to validate the content of the assessment system based on three rubrics (drafting process, dissertation, and viva). Subsequently, a reliability and validity study of the rubrics was carried out on the 52 theses presented during the 2014-2015 academic year. The BT drafting process rubric has 8 criteria (S-CVI=0.93; α=0.837; ICC=0.614), the dissertation rubric has 7 criteria (S-CVI=0.9; α=0.893; ICC=0.74), and the viva rubric has 4 criteria (S-CVI=0.86; α=8.16; ICC=0.895). A nursing BT assessment system based on three rubrics (drafting process, dissertation, and viva) has been validated. This system may be transferred to other nursing degrees or degrees from other academic areas. It is necessary to continue with the validation process taking into account factors that may affect the results obtained. Copyright © 2015 Elsevier Ltd. All rights reserved.
Application of Finite Element Method to Analyze Inflatable Waveguide Structures
NASA Technical Reports Server (NTRS)
Deshpande, M. D.
1998-01-01
A Finite Element Method (FEM) is presented to determine propagation characteristics of deformed inflatable rectangular waveguide. Various deformations that might be present in an inflatable waveguide are analyzed using the FEM. The FEM procedure and the code developed here are so general that they can be used for any other deformations that are not considered in this report. The code is validated by applying the present code to rectangular waveguide without any deformations and comparing the numerical results with earlier published results.
The 2014 Sandia Verification and Validation Challenge: Problem statement
Hu, Kenneth; Orient, George
2016-01-18
This paper presents a case study in utilizing information from experiments, models, and verification and validation (V&V) to support a decision. It consists of a simple system with data and models provided, plus a safety requirement to assess. The goal is to pose a problem that is flexible enough to allow challengers to demonstrate a variety of approaches, but constrained enough to focus attention on a theme. This was accomplished by providing a good deal of background information in addition to the data, models, and code, but directing the participants' activities with specific deliverables. In this challenge, the theme ismore » how to gather and present evidence about the quality of model predictions, in order to support a decision. This case study formed the basis of the 2014 Sandia V&V Challenge Workshop and this resulting special edition of the ASME Journal of Verification, Validation, and Uncertainty Quantification.« less
A Historical Forcing Ice Sheet Model Validation Framework for Greenland
NASA Astrophysics Data System (ADS)
Price, S. F.; Hoffman, M. J.; Howat, I. M.; Bonin, J. A.; Chambers, D. P.; Kalashnikova, I.; Neumann, T.; Nowicki, S.; Perego, M.; Salinger, A.
2014-12-01
We propose an ice sheet model testing and validation framework for Greenland for the years 2000 to the present. Following Perego et al. (2014), we start with a realistic ice sheet initial condition that is in quasi-equilibrium with climate forcing from the late 1990's. This initial condition is integrated forward in time while simultaneously applying (1) surface mass balance forcing (van Angelen et al., 2013) and (2) outlet glacier flux anomalies, defined using a new dataset of Greenland outlet glacier flux for the past decade (Enderlin et al., 2014). Modeled rates of mass and elevation change are compared directly to remote sensing observations obtained from GRACE and ICESat. Here, we present a detailed description of the proposed validation framework including the ice sheet model and model forcing approach, the model-to-observation comparison process, and initial results comparing model output and observations for the time period 2000-2013.
DSMC Simulations of Hypersonic Flows and Comparison With Experiments
NASA Technical Reports Server (NTRS)
Moss, James N.; Bird, Graeme A.; Markelov, Gennady N.
2004-01-01
This paper presents computational results obtained with the direct simulation Monte Carlo (DSMC) method for several biconic test cases in which shock interactions and flow separation-reattachment are key features of the flow. Recent ground-based experiments have been performed for several biconic configurations, and surface heating rate and pressure measurements have been proposed for code validation studies. The present focus is to expand on the current validating activities for a relatively new DSMC code called DS2V that Bird (second author) has developed. Comparisons with experiments and other computations help clarify the agreement currently being achieved between computations and experiments and to identify the range of measurement variability of the proposed validation data when benchmarked with respect to the current computations. For the test cases with significant vibrational nonequilibrium, the effect of the vibrational energy surface accommodation on heating and other quantities is demonstrated.
High-order continuum kinetic method for modeling plasma dynamics in phase space
Vogman, G. V.; Colella, P.; Shumlak, U.
2014-12-15
Continuum methods offer a high-fidelity means of simulating plasma kinetics. While computationally intensive, these methods are advantageous because they can be cast in conservation-law form, are not susceptible to noise, and can be implemented using high-order numerical methods. Advances in continuum method capabilities for modeling kinetic phenomena in plasmas require the development of validation tools in higher dimensional phase space and an ability to handle non-cartesian geometries. To that end, a new benchmark for validating Vlasov-Poisson simulations in 3D (x,v x,v y) is presented. The benchmark is based on the Dory-Guest-Harris instability and is successfully used to validate a continuummore » finite volume algorithm. To address challenges associated with non-cartesian geometries, unique features of cylindrical phase space coordinates are described. Preliminary results of continuum kinetic simulations in 4D (r,z,v r,v z) phase space are presented.« less
NASA Technical Reports Server (NTRS)
Ballard, Jerrell R., Jr.; Smith, James A.
2002-01-01
The tree canopy characterization presented herein provided ground and tree canopy data for different types of tree canopies in support of EO-1 reflective and thermal infrared validation studies. These characterization efforts during August and September of 2001 included stem and trunk location surveys, tree structure geometry measurements, meteorology, and leaf area index (LAI) measurements. Measurements were also collected on thermal and reflective spectral properties of leaves, tree bark, leaf litter, soil, and grass. The data presented in this report were used to generate synthetic reflective and thermal infrared scenes and images that were used for the EO-1 Validation Program. The data also were used to evaluate whether the EO-1 ALI reflective channels can be combined with the Landsat-7 ETM+ thermal infrared channel to estimate canopy temperature, and also test the effects of separating the thermal and reflective measurements in time resulting from satellite formation flying.
Expert system verification and validation study. Delivery 3A and 3B: Trip summaries
NASA Technical Reports Server (NTRS)
French, Scott
1991-01-01
Key results are documented from attending the 4th workshop on verification, validation, and testing. The most interesting part of the workshop was when representatives from the U.S., Japan, and Europe presented surveys of VV&T within their respective regions. Another interesting part focused on current efforts to define industry standards for artificial intelligence and how that might affect approaches to VV&T of expert systems. The next part of the workshop focused on VV&T methods of applying mathematical techniques to verification of rule bases and techniques for capturing information relating to the process of developing software. The final part focused on software tools. A summary is also presented of the EPRI conference on 'Methodologies, Tools, and Standards for Cost Effective Reliable Software Verification and Validation. The conference was divided into discussion sessions on the following issues: development process, automated tools, software reliability, methods, standards, and cost/benefit considerations.
Validation of Community Models: Identifying Events in Space Weather Model Timelines
NASA Technical Reports Server (NTRS)
MacNeice, Peter
2009-01-01
I develop and document a set of procedures which test the quality of predictions of solar wind speed and polarity of the interplanetary magnetic field (IMF) made by coupled models of the ambient solar corona and heliosphere. The Wang-Sheeley-Arge (WSA) model is used to illustrate the application of these validation procedures. I present an algorithm which detects transitions of the solar wind from slow to high speed. I also present an algorithm which processes the measured polarity of the outward directed component of the IMF. This removes high-frequency variations to expose the longer-scale changes that reflect IMF sector changes. I apply these algorithms to WSA model predictions made using a small set of photospheric synoptic magnetograms obtained by the Global Oscillation Network Group as input to the model. The results of this preliminary validation of the WSA model (version 1.6) are summarized.
De Caluwé, Elien; Verbeke, Lize; van Aken, Marcel; van der Heijden, Paul T; De Clercq, Barbara
2018-02-22
The inclusion of a dimensional trait model of personality pathology in DSM-5 creates new opportunities for research on developmental antecedents of personality pathology. The traits of this model can be measured with the Personality Inventory for DSM-5 (PID-5), initially developed for adults, but also demonstrating validity in adolescents. The present study adds to the growing body of literature on the psychometrics of the PID-5, by examining its structure, validity, and reliability in 187 psychiatric-referred late adolescents and emerging adults. PID-5, Big Five Inventory, and Kidscreen self-reports were provided, and 88 non-clinical matched controls completed the PID-5. Results confirm the PID-5's five-factor structure, indicate adequate psychometric properties, and underscore the construct and criterion validity, showing meaningful associations with adaptive traits and quality of life. Results are discussed in terms of the PID-5's applicability in vulnerable populations who are going through important developmental transition phases, such as the step towards early adulthood.
A study of the face validity of the 40 item version of the Defense Style Questionnaire (DSQ-40).
Chabrol, Henri; Rousseau, Amélie; Rodgers, Rachel; Callahan, Stacey; Pirlot, Gérard; Sztulman, Henri
2005-11-01
There are few studies examining the face validity of the 40-item version of the Defense Style Questionnaire (DSQ-40). Moreover, the existing studies have provided conflicting results. The present study provides an in-depth examination of the face validity of the DSQ-40. Eight clinicians independently attributed each item of the DSQ-40 to a defense mechanism. The defense mechanisms listed in the DSM-IV Defensive Functioning Scale and their definitions were provided as a guide, along with the definition of those defense mechanisms investigated by the DSQ that are not included. It was further specified that the raters could attribute the items to defense mechanisms other than those listed or coping mechanisms. Twelve items out of 40 (30%) were attributed to the defense mechanisms they were supposed to investigate by fewer than four out of the eight raters. This result suggests that a substantial part of the DSQ-40 is lacking in face validity.
Measuring the emotional climate of an organization.
Yurtsever, Gülçimen; De Rivera, Joseph
2010-04-01
The importance of emotional climate in the organizational climate literature has gained interest. However, few studies have concentrated on adequately measuring the emotional climate of organizations. In this study, a reliable and valid scale was developed to measure the most important aspects of emotional climate in different organizations. This study presents evidence of reliability and validity for 28 items constructed to measure emotional climate in an organization in four separate studies. The data were obtained from working people from four different organizations by self-administered questionnaires. The findings indicate that three factors--Trust, Hope, and Security--were factors of the 28-item scale. Validation data also included correlations with duration of employment. The other method of assessing criterion validity was by comparing mean scores in organizations with differing productivity; results indicated that the organization with more productive members had a significantly higher mean score on emotional climate and its subscales. The generalizability of the results to private businesses also was assessed.
NASA Astrophysics Data System (ADS)
Pearlman, Aaron J.; Padula, Francis; Shao, Xi; Cao, Changyong; Goodman, Steven J.
2016-09-01
One of the main objectives of the Geostationary Operational Environmental Satellite R-Series (GOES-R) field campaign is to validate the SI traceability of the Advanced Baseline Imager. The campaign plans include a feasibility demonstration study for new near surface unmanned aircraft system (UAS) measurement capability that is being developed to meet the challenges of validating geostationary sensors. We report our progress in developing our initial systems by presenting the design and preliminary characterization results of the sensor suite. The design takes advantage of off-the-shelf technologies and fiber-based optical components to make hemispheric directional measurements from a UAS. The characterization results - including laboratory measurements of temperature effects and polarization sensitivity - are used to refine the radiometric uncertainty budget towards meeting the validation objectives for the campaign. These systems will foster improved validation capabilities for the GOES-R field campaign and other next generation satellite systems.
Dias, Juliana Chioda Ribeiro; Maroco, João; Campos, Juliana Alvares Duarte Bonini
2015-03-01
Online data collection is becoming increasingly common and has some advantages compared to traditional paper-and-pencil formats, such as reducing loss of data, increasing participants' privacy, and decreasing the effect of social desirability. However, the validity and reliability of this administration format must be established before results can be considered acceptable. The aim of this study was to evaluate the validity, reliability, and equivalence of paper-and-pencil and online versions of the Weight Concerns Scale (WCS) when applied to Brazilian university students. A crossover design was used, and the Portuguese version of the WCS (in both paper-and-pencil and online formats) was completed by 100 college students. The results indicated adequate fit in both formats. The simultaneous fit of data for both groups was excellent, with strong invariance between models. Adequate convergent validity, internal consistency, and mean score equivalence of the WCS in both formats were observed. Thus, the WCS presented adequate reliability and validity in both administration formats, with equivalence/stability between answers.
Bernard, Larry C
2010-04-01
There are few multidimensional measures of individual differences in motivation available. The Assessment of Individual Motives-Questionnaire assesses 15 putative dimensions of motivation. The dimensions are based on evolutionary theory and preliminary evidence suggests the motive scales have good psychometric properties. The scales are reliable and there is evidence of their consensual validity (convergence of self-other ratings) and behavioral validity (relationships with self-other reported behaviors of social importance). Additional validity research is necessary, however, especially with respect to current models of personality. The present study tested two general and 24 specific hypotheses based on proposed evolutionary advantages/disadvantages and fitness benefits/costs of the five-factor model of personality together with the new motive scales in a sample of 424 participants (M age=28.8 yr., SD=14.6). Results were largely supportive of the hypotheses. These results support the validity of new motive dimensions and increase understanding of the five-factor model of personality.
Recalibration and Validation of the SMAP L-Band Radiometer
NASA Technical Reports Server (NTRS)
Peng, Jinzheng; Piepmeier, Jeffrey; Le Vine, David M.; Dinnat, Emmanuel; Bindlish, Rajat; De amici, Giovanni; Mohammed, Priscilla; Misra, Sidharth; Yueh, Simon; Meissner, Thomas
2017-01-01
SMAP mission was launched on 31st January 2015 in a 6 AM 6 PM sun-synchronous orbit at 685 km altitude to measure soil moisture and freethaw globally. The passive instrument of SMAP is a fully polarimetric L-band radiometer (1.4GHz) operating with a bandwidth of 24MHz. The radiometer L1B data product version 3 has been released for public science activities. Post-launch calibration and validation activities are described in [4,5]. Validation results show that SMAP antenna temperature (TA) is 2.6 K warmer over galactic Cold Sky (CS), and land TB is 2.6 K colder comparing to SMOS land TB (compared at the top of the atmosphere) after the update of the reflectors thermal model. Due to the biases, the SMAP radiometer is under re-calibration for next data release in 2018.We present the updated calibration approaches for the SMAP radiometer product. We will discuss the various radiometer calibration parameters and part of the validation process and result.
NASA Astrophysics Data System (ADS)
Suwono, H.; Susanti, S.; Lestari, U.
2017-04-01
The learning activities that involve the students to learn actively is one of the characteristics of a qualified education. The learning strategy that involves students’ active learning is guided inquiry. Learning problems today are growing metacognitive skills and cognitive learning outcomes. It is the research and development of learning module by using 4D models of Thiagarajan. The first phase is Define, which analyses the problems and needs required by the prior preparation of the module. The second phase is Design, which formulates learning design and devices to obtain the initial draft of learning modules. The third stage is Develop, which is developing and writing module, module validation, product testing, revision, and the resulting an end-product results module development. The fourth stage is Disseminate, which is disseminating of the valid products. Modules were validated by education experts, practitioners, subject matter experts, and expert of online media. The results of the validation module indicated that the module was valid and could be used in teaching and learning. In the validation phase of testing methods, we used experiments to know the difference of metacognitive skills and learning outcomes between the control group and experimental group. The experimental design was a one group pretest-posttest design. The results of the data analysis showed that the modules could enhance metacognitive skills and learning outcomes. The advantages of this module is as follows, 1) module is accompanied by a video link on a website that contains practical activities that are appropriate to Curriculum 2013, 2) module is accompanied by a video link on a website that contains about manual laboratory activities that will be used in the classroom face-to-face, so that students are ready when doing laboratory activities, 3) this module can be online through chat to increase students’ understanding. The disadvantages of this module are the material presented in the modules is limited. It is suggested that for the better utilisation of the online activities, students should be present at every meeting of the activities, so as to make all the students participate actively. It is also suggested that school set up facilities to support blended learning.
A Model for Estimating the Reliability and Validity of Criterion-Referenced Measures.
ERIC Educational Resources Information Center
Edmonston, Leon P.; Randall, Robert S.
A decision model designed to determine the reliability and validity of criterion referenced measures (CRMs) is presented. General procedures which pertain to the model are discussed as to: Measures of relationship, Reliability, Validity (content, criterion-oriented, and construct validation), and Item Analysis. The decision model is presented in…
Alcázar-Córcoles, Miguel Á; Verdejo-García, Antonio; Bouso-Sáiz, José C
2016-01-01
The objective of the present study was the validation and scaling of the Plutchik's Violence Risk Scale (EV) in adolescent Spanish-speaking population. For this purpose, a sample of adolescents from El Salvador, Mexico and Spain was obtained. The sample consisted of 1035 participants with a mean age of 16.2. There were 450 adolescents from forensic population (those who committed crime) and 585 adolescents from normal population (no crime committed). The internal consistency of the EV was estimated by Cronbach's alpha coefficient and with a value of 0.782. As for validity, the factorial structures found explain a large proportion of the variance (53.385%); the convergent validity was estimated by the correlation between the dimensions found, the EV and sociodemographic, criminological and personality variables. The developed scales are presented, for the first time in a cross-cultural sample, differentiating between gender and continent. Consequently, the obtained results suggest that the EV is a valid and reliable instrument within adolescent Spanish-speaking population. Furthermore, it is a quick scale, easy to apply, which is something valuable in forensic assessment.
Development and validation of the Relaxation-Mindfulness Scale for Adolescents (EREMIND-A).
López-González, Luis; Amutio, Alberto; Oriol, Xavier; Gázquez, José J; Pérez-Fuentes, Mª C; Molero, Mª M
2018-05-01
The aim of this investigation was to validate the Relaxation-Mindfulness Scale for Adolescents (EREMIND-A), consisting of 18 items and three factors (Attention-Concentration in the present moment; Relaxation (abilities and attitudes); and Sensory awareness/Contemplation/Interiority). The validation was done with a sample of Secondary Education and Baccalaureate students from four different centres in Spain (n = 1.120). EFA and CFA of the EREMIND-A were performed and construct and incremental validities calculated. Initial results confirm the validity and reliability of the scale. There is a need for a broader conceptualization of mindfulness, as well as the inclusion and analysis of other related and cross-cutting concepts. The research in this sense will propitiate the adaptation of the Mindfulness-Based Interventions to the reality of the adolescents in the educational centers, where relaxation and the interiority are aspects to be taken into consideration.
Development and Validation of the Elder Learning Barriers Scale Among Older Chinese Adults.
Wang, Renfeng; De Donder, Liesbeth; De Backer, Free; He, Tao; Van Regenmortel, Sofie; Li, Shihua; Lombaerts, Koen
2017-12-01
This study describes the development and validation of the Elder Learning Barriers (ELB) scale, which seeks to identify the obstacles that affect the level of educational participation of older adults. The process of item pool design and scale development is presented, as well as the testing and scale refinement procedure. The data were collected from a sample of 579 older Chinese adults (aged over 55) in the Xi'an region of China. After randomly splitting the sample for cross-validation purposes, the construct validity of the ELB scale was confirmed containing five dimensions: dispositional, informational, physical, situational, and institutional barriers. Furthermore, developmental differences in factor structure have been examined among older age groups. The results indicated that the scale demonstrated good reliability and validity. We conclude in general that the ELB scale appears to be a valuable instrument for examining the learning barriers that older Chinese citizens experience for participating in organized educational activities.
Gorgulho, B M; Pot, G K; Marchioni, D M
2017-05-01
The aim of this study was to evaluate the validity and reliability of the Main Meal Quality Index when applied on the UK population. The indicator was developed to assess meal quality in different populations, and is composed of 10 components: fruit, vegetables (excluding potatoes), ratio of animal protein to total protein, fiber, carbohydrate, total fat, saturated fat, processed meat, sugary beverages and desserts, and energy density, resulting in a score range of 0-100 points. The performance of the indicator was measured using strategies for assessing content validity, construct validity, discriminant validity and reliability, including principal component analysis, linear regression models and Cronbach's alpha. The indicator presented good reliability. The Main Meal Quality Index has been shown to be valid for use as an instrument to evaluate, monitor and compare the quality of meals consumed by adults in the United Kingdom.
Psychological collectivism: a measurement validation and linkage to group member performance.
Jackson, Christine L; Colquitt, Jason A; Wesson, Michael J; Zapata-Phelan, Cindy P
2006-07-01
The 3 studies presented here introduce a new measure of the individual-difference form of collectivism. Psychological collectivism is conceptualized as a multidimensional construct with the following 5 facets: preference for in-groups, reliance on in-groups, concern for in-groups, acceptance of in-group norms, and prioritization of in-group goals. Study 1 developed and tested the new measure in a sample of consultants. Study 2 cross-validated the measure using an alumni sample of a Southeastern university, assessing its convergent validity with other collectivism measures. Study 3 linked scores on the measure to 4 dimensions of group member performance (task performance, citizenship behavior, counterproductive behavior, and withdrawal behavior) in a computer software firm and assessed discriminant validity using the Big Five. The results of the studies support the construct validity of the measure and illustrate the potential value of collectivism as a predictor of group member performance. ((c) 2006 APA, all rights reserved).
Robust and real-time rotor control with magnetic bearings
NASA Technical Reports Server (NTRS)
Sinha, A.; Wang, K. W.; Mease, K. L.
1991-01-01
This paper deals with the sliding mode control of a rigid rotor via radial magnetic bearings. The digital control algorithm and the results from numerical simulations are presented for an experimental rig. The experimental system which has been set up to digitally implement and validate the sliding mode control algorithm is described. Two methods for the development of control softwares are presented. Experimental results for individual rotor axis are discussed.
Performance Validation Approach for the GTX Air-Breathing Launch Vehicle
NASA Technical Reports Server (NTRS)
Trefny, Charles J.; Roche, Joseph M.
2002-01-01
The primary objective of the GTX effort is to determine whether or not air-breathing propulsion can enable a launch vehicle to achieve orbit in a single stage. Structural weight, vehicle aerodynamics, and propulsion performance must be accurately known over the entire flight trajectory in order to make a credible assessment. Structural, aerodynamic, and propulsion parameters are strongly interdependent, which necessitates a system approach to design, evaluation, and optimization of a single-stage-to-orbit concept. The GTX reference vehicle serves this purpose, by allowing design, development, and validation of components and subsystems in a system context. The reference vehicle configuration (including propulsion) was carefully chosen so as to provide high potential for structural and volumetric efficiency, and to allow the high specific impulse of air-breathing propulsion cycles to be exploited. Minor evolution of the configuration has occurred as analytical and experimental results have become available. With this development process comes increasing validation of the weight and performance levels used in system performance determination. This paper presents an overview of the GTX reference vehicle and the approach to its performance validation. Subscale test rigs and numerical studies used to develop and validate component performance levels and unit structural weights are outlined. The sensitivity of the equivalent, effective specific impulse to key propulsion component efficiencies is presented. The role of flight demonstration in development and validation is discussed.
NASA Astrophysics Data System (ADS)
Idris, N. H.; Deng, X.; Idris, N. H.
2017-05-01
This paper presents the validation of Coastal Altimetry Waveform Retracking Expert System (CAWRES), a novel method to optimize the Jason satellite altimetric sea levels from multiple retracking solutions. The validation is conducted over the region of Prince William Sound in Alaska, USA, where altimetric waveforms are perturbed by emerged land and sea states. Validation is performed in twofold. First, comparison with existing retrackers (i.e. MLE4 and Ice) from the Sensor Geophysical Data Records (SGDR), and second, comparison with in-situ tide gauge data. From the first validation assessment, in general, CAWRES outperforms the MLE4 and Ice retrackers. In 4 out of 6 cases, the value of improvement percentage (standard deviation of difference) is higher (lower) than those of the SGDR retrackers. CAWRES also presents the best performance in producing valid observations, and has the lowest noise when compared to the SGDR retrackers. From the second assessment with tide gauge, CAWRES retracked sea level anomalies (SLAs) are consistent with those of the tide gauge. The accuracy of CAWRES retracked SLAs is slightly better than those of the MLE4. However, the performance of Ice retracker is better than those of CAWRES and MLE4, suggesting the empirical-based retracker is more effective. The results demonstrate that the CAWRES would have potential to be applied to coastal regions elsewhere.
BETA (Bitter Electromagnet Testing Apparatus)
NASA Astrophysics Data System (ADS)
Bates, Evan M.; Birmingham, William J.; Rivera, William F.; Romero-Talamas, Carlos A.
2017-10-01
The Bitter Electromagnet Testing Apparatus (BETA) is a 1-Tesla (T) prototype of the 10-T Adjustable Long Pulse High-Field Apparatus (ALPHA). These water-cooled resistive magnets use high DC currents to produce strong uniform magnetic fields. Presented here is the successful completion of the BETA project and experimental results validating analytical magnet designing methods developed at the Dusty Plasma Laboratory (DPL). BETA's final design specifications will be highlighted which include electromagnetic, thermal and stress analyses. The magnet core design will be explained which include: Bitter Arcs, helix starters, and clamping annuli. The final version of the magnet's vessel and cooling system are also presented, as well as the electrical system of BETA, which is composed of a unique solid-state breaker circuit. Experimental results presented will show the operation of BETA at 1 T. The results are compared to both analytical design methods and finite element analysis calculations. We also explore the steady state maximums and theoretical limits of BETA's design. The completion of BETA validates the design and manufacturing techniques that will be used in the succeeding magnet, ALPHA.
Peters, Kurt R; Gawronski, Bertram
2011-04-01
Research has demonstrated that implicit and explicit evaluations of the same object can diverge. Explanations of such dissociations frequently appeal to dual-process theories, such that implicit evaluations are assumed to reflect object-valence contingencies independent of their perceived validity, whereas explicit evaluations reflect the perceived validity of object-valence contingencies. Although there is evidence supporting these assumptions, it remains unclear if dissociations can arise in situations in which object-valence contingencies are judged to be true or false during the learning of these contingencies. Challenging dual-process accounts that propose a simultaneous operation of two parallel learning mechanisms, results from three experiments showed that the perceived validity of evaluative information about social targets qualified both explicit and implicit evaluations when validity information was available immediately after the encoding of the valence information; however, delaying the presentation of validity information reduced its qualifying impact for implicit, but not explicit, evaluations.
Orsi, Rebecca
2017-02-01
Concept mapping is now a commonly-used technique for articulating and evaluating programmatic outcomes. However, research regarding validity of knowledge and outcomes produced with concept mapping is sparse. The current study describes quantitative validity analyses using a concept mapping dataset. We sought to increase the validity of concept mapping evaluation results by running multiple cluster analysis methods and then using several metrics to choose from among solutions. We present four different clustering methods based on analyses using the R statistical software package: partitioning around medoids (PAM), fuzzy analysis (FANNY), agglomerative nesting (AGNES) and divisive analysis (DIANA). We then used the Dunn and Davies-Bouldin indices to assist in choosing a valid cluster solution for a concept mapping outcomes evaluation. We conclude that the validity of the outcomes map is high, based on the analyses described. Finally, we discuss areas for further concept mapping methods research. Copyright © 2016 Elsevier Ltd. All rights reserved.
Testing the validity of the International Atomic Energy Agency (IAEA) safety culture model.
López de Castro, Borja; Gracia, Francisco J; Peiró, José M; Pietrantoni, Luca; Hernández, Ana
2013-11-01
This paper takes the first steps to empirically validate the widely used model of safety culture of the International Atomic Energy Agency (IAEA), composed of five dimensions, further specified by 37 attributes. To do so, three independent and complementary studies are presented. First, 290 students serve to collect evidence about the face validity of the model. Second, 48 experts in organizational behavior judge its content validity. And third, 468 workers in a Spanish nuclear power plant help to reveal how closely the theoretical five-dimensional model can be replicated. Our findings suggest that several attributes of the model may not be related to their corresponding dimensions. According to our results, a one-dimensional structure fits the data better than the five dimensions proposed by the IAEA. Moreover, the IAEA model, as it stands, seems to have rather moderate content validity and low face validity. Practical implications for researchers and practitioners are included. Copyright © 2013 Elsevier Ltd. All rights reserved.
Item validity vs. item discrimination index: a redundancy?
NASA Astrophysics Data System (ADS)
Panjaitan, R. L.; Irawati, R.; Sujana, A.; Hanifah, N.; Djuanda, D.
2018-03-01
In several literatures about evaluation and test analysis, it is common to find that there are calculations of item validity as well as item discrimination index (D) with different formula for each. Meanwhile, other resources said that item discrimination index could be obtained by calculating the correlation between the testee’s score in a particular item and the testee’s score on the overall test, which is actually the same concept as item validity. Some research reports, especially undergraduate theses tend to include both item validity and item discrimination index in the instrument analysis. It seems that these concepts might overlap for both reflect the test quality on measuring the examinees’ ability. In this paper, examples of some results of data processing on item validity and item discrimination index were compared. It would be discussed whether item validity and item discrimination index can be represented by one of them only or it should be better to present both calculations for simple test analysis, especially in undergraduate theses where test analyses were included.
Validation of spatial variability in downscaling results from the VALUE perfect predictor experiment
NASA Astrophysics Data System (ADS)
Widmann, Martin; Bedia, Joaquin; Gutiérrez, Jose Manuel; Maraun, Douglas; Huth, Radan; Fischer, Andreas; Keller, Denise; Hertig, Elke; Vrac, Mathieu; Wibig, Joanna; Pagé, Christian; Cardoso, Rita M.; Soares, Pedro MM; Bosshard, Thomas; Casado, Maria Jesus; Ramos, Petra
2016-04-01
VALUE is an open European network to validate and compare downscaling methods for climate change research. Within VALUE a systematic validation framework to enable the assessment and comparison of both dynamical and statistical downscaling methods has been developed. In the first validation experiment the downscaling methods are validated in a setup with perfect predictors taken from the ERA-interim reanalysis for the period 1997 - 2008. This allows to investigate the isolated skill of downscaling methods without further error contributions from the large-scale predictors. One aspect of the validation is the representation of spatial variability. As part of the VALUE validation we have compared various properties of the spatial variability of downscaled daily temperature and precipitation with the corresponding properties in observations. We have used two test validation datasets, one European-wide set of 86 stations, and one higher-density network of 50 stations in Germany. Here we present results based on three approaches, namely the analysis of i.) correlation matrices, ii.) pairwise joint threshold exceedances, and iii.) regions of similar variability. We summarise the information contained in correlation matrices by calculating the dependence of the correlations on distance and deriving decorrelation lengths, as well as by determining the independent degrees of freedom. Probabilities for joint threshold exceedances and (where appropriate) non-exceedances are calculated for various user-relevant thresholds related for instance to extreme precipitation or frost and heat days. The dependence of these probabilities on distance is again characterised by calculating typical length scales that separate dependent from independent exceedances. Regionalisation is based on rotated Principal Component Analysis. The results indicate which downscaling methods are preferable if the dependency of variability at different locations is relevant for the user.
CheS-Mapper 2.0 for visual validation of (Q)SAR models
2014-01-01
Background Sound statistical validation is important to evaluate and compare the overall performance of (Q)SAR models. However, classical validation does not support the user in better understanding the properties of the model or the underlying data. Even though, a number of visualization tools for analyzing (Q)SAR information in small molecule datasets exist, integrated visualization methods that allow the investigation of model validation results are still lacking. Results We propose visual validation, as an approach for the graphical inspection of (Q)SAR model validation results. The approach applies the 3D viewer CheS-Mapper, an open-source application for the exploration of small molecules in virtual 3D space. The present work describes the new functionalities in CheS-Mapper 2.0, that facilitate the analysis of (Q)SAR information and allows the visual validation of (Q)SAR models. The tool enables the comparison of model predictions to the actual activity in feature space. The approach is generic: It is model-independent and can handle physico-chemical and structural input features as well as quantitative and qualitative endpoints. Conclusions Visual validation with CheS-Mapper enables analyzing (Q)SAR information in the data and indicates how this information is employed by the (Q)SAR model. It reveals, if the endpoint is modeled too specific or too generic and highlights common properties of misclassified compounds. Moreover, the researcher can use CheS-Mapper to inspect how the (Q)SAR model predicts activity cliffs. The CheS-Mapper software is freely available at http://ches-mapper.org. Graphical abstract Comparing actual and predicted activity values with CheS-Mapper.
Validation of Robotic Surgery Simulator (RoSS).
Kesavadas, Thenkurussi; Stegemann, Andrew; Sathyaseelan, Gughan; Chowriappa, Ashirwad; Srimathveeravalli, Govindarajan; Seixas-Mikelus, Stéfanie; Chandrasekhar, Rameella; Wilding, Gregory; Guru, Khurshid
2011-01-01
Recent growth of daVinci Robotic Surgical System as a minimally invasive surgery tool has led to a call for better training of future surgeons. In this paper, a new virtual reality simulator, called RoSS is presented. Initial results from two studies - face and content validity, are very encouraging. 90% of the cohort of expert robotic surgeons felt that the simulator was excellent or somewhat close to the touch and feel of the daVinci console. Content validity of the simulator received 90% approval in some cases. These studies demonstrate that RoSS has the potential of becoming an important training tool for the daVinci surgical robot.
Meunier, Jean-Christophe; Roskam, Isabelle
2009-01-01
This study presents a validation of a scale that assesses parents' childrearing behavior toward young children. The scale was validated on 565 parents of 2- to 7-year-old children. The current results replicated the factor solution of the original scale designed for parents of school-aged children. The scale demonstrated good psychometric properties: moderate to high internal consistency, the expected relations with criterion variables (parental self-efficacy beliefs, child's behavior and personality), and discriminative properties according to the parents' gender and educational level, the child's age and gender, and the difference between referred and nonreferred children.
NASA Astrophysics Data System (ADS)
Wimmer, Werenfrid
2016-08-01
The Infrared Sea surface temperature Autonomous Radiometer (ISAR) was developed to provide reference data for the validation of satellite Sea Surface Temperature at the Skin interface (SSTskin) temperature data products, particularly the Advanced Along Track Scanning Radiometer (AATSR). Since March 2004 ISAR instruments have been deployed nearly continuously on ferries crossing the English Channel and the Bay of Biscay, between Portsmouth (UK) and Bilbao/Santander (Spain). The resulting twelve years of ISAR data, including an individual uncertainty estimate for each SST record, are calibrated with traceability to national standards (National Institute of Standards and Technology, USA (NIST) and National Physical Laboratory, Teddigton, UK (NPL), Fiducial Reference Measurements for satellite derived surface temperature product validation (FRM4STS)). They provide a unique independent in situ reference dataset against which to validate satellite derived products. We present results of the AATSR validation, and show the use of ISAR fiducial reference measurements as a common traceable validation data source for both AATSR and Sea and Land Surface Temperature Radiometer (SLSTR). ISAR data were also used to review performance of the Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) Sea Surface Temperature (SST) analysis before and after the demise of ESA Environmental Satellite (Envisat) when AATSR inputs ceased This demonstrates use of the ISAR reference data set for validating the SST climatologies that will bridge the data gap between AATSR and SLSTR.
First Results on the High Energy Cosmic Ray Electron Spectrum from Fermi Lat
NASA Technical Reports Server (NTRS)
Moiseev, Alexander
2009-01-01
This viewgraph presentation addresses energy reconstruction, electron-hadron separation, validation of Monte Carlo with flight data and an assessment of systematic errors from the Fermi Large Area Telescope.
NASA Technical Reports Server (NTRS)
Tabiei, Al; Lawrence, Charles; Fasanella, Edwin L.
2009-01-01
A series of crash tests were conducted with dummies during simulated Orion crew module landings at the Wright-Patterson Air Force Base. These tests consisted of several crew configurations with and without astronaut suits. Some test results were collected and are presented. In addition, finite element models of the tests were developed and are presented. The finite element models were validated using the experimental data, and the test responses were compared with the computed results. Occupant crash data, such as forces, moments, and accelerations, were collected from the simulations and compared with injury criteria to assess occupant survivability and injury. Some of the injury criteria published in the literature is summarized for completeness. These criteria were used to determine potential injury during crew impact events.
Assessing the performance of dynamical trajectory estimates
NASA Astrophysics Data System (ADS)
Bröcker, Jochen
2014-06-01
Estimating trajectories and parameters of dynamical systems from observations is a problem frequently encountered in various branches of science; geophysicists for example refer to this problem as data assimilation. Unlike as in estimation problems with exchangeable observations, in data assimilation the observations cannot easily be divided into separate sets for estimation and validation; this creates serious problems, since simply using the same observations for estimation and validation might result in overly optimistic performance assessments. To circumvent this problem, a result is presented which allows us to estimate this optimism, thus allowing for a more realistic performance assessment in data assimilation. The presented approach becomes particularly simple for data assimilation methods employing a linear error feedback (such as synchronization schemes, nudging, incremental 3DVAR and 4DVar, and various Kalman filter approaches). Numerical examples considering a high gain observer confirm the theory.
Assessing the performance of dynamical trajectory estimates.
Bröcker, Jochen
2014-06-01
Estimating trajectories and parameters of dynamical systems from observations is a problem frequently encountered in various branches of science; geophysicists for example refer to this problem as data assimilation. Unlike as in estimation problems with exchangeable observations, in data assimilation the observations cannot easily be divided into separate sets for estimation and validation; this creates serious problems, since simply using the same observations for estimation and validation might result in overly optimistic performance assessments. To circumvent this problem, a result is presented which allows us to estimate this optimism, thus allowing for a more realistic performance assessment in data assimilation. The presented approach becomes particularly simple for data assimilation methods employing a linear error feedback (such as synchronization schemes, nudging, incremental 3DVAR and 4DVar, and various Kalman filter approaches). Numerical examples considering a high gain observer confirm the theory.
Towards a Validation of the Three Pathways Model of Pathological Gambling.
Valleur, Marc; Codina, Irène; Vénisse, Jean-Luc; Romo, Lucia; Magalon, David; Fatséas, Mélina; Chéreau-Boudet, Isabelle; Gorsane, Mohamed-Ali; Guilleux, Alice; Grall-Bronnec, Marie; Challet-Bouju, Gaëlle
2016-06-01
With the aim of validating the three pathways hypothesis of pathological gambling (Blaszczynski and Nower in Addiction 97:487-499, 2002) 372 pathological gamblers meeting DSM IV (2000) criteria were assessed via a structured clinical interview as well as being subjected to personality tests and evaluation of their gambling practices. Our results show that it is possible to identify three subgroups corresponding to the three pathways: behaviourally conditioned problem gamblers, emotionally vulnerable problem gamblers and antisocial impulsivist problem gamblers. Our results particularly demonstrate that impulsivist gamblers preferentially choose semi-skilful gambling (horse racing and sports gambling) whereas emotionally vulnerable gamblers are significantly more attracted to games of chance (one-armed bandits, scratch cards, etc.) This led us to propose a functional presentation of the three pathways model which differs somewhat from the Blaszczynski and Nower presentation.
Virtual evaluation of stent graft deployment: a validated modeling and simulation study.
De Bock, S; Iannaccone, F; De Santis, G; De Beule, M; Van Loo, D; Devos, D; Vermassen, F; Segers, P; Verhegghe, B
2012-09-01
The presented study details the virtual deployment of a bifurcated stent graft (Medtronic Talent) in an Abdominal Aortic Aneurysm model, using the finite element method. The entire deployment procedure is modeled, with the stent graft being crimped and bent according to the vessel geometry, and subsequently released. The finite element results are validated in vitro with placement of the device in a silicone mock aneurysm, using high resolution CT scans to evaluate the result. The presented work confirms the capability of finite element computer simulations to predict the deformed configuration after endovascular aneurysm repair (EVAR). These simulations can be used to quantify mechanical parameters, such as neck dilations, radial forces and stresses in the device, that are difficult or impossible to obtain from medical imaging. Copyright © 2012 Elsevier Ltd. All rights reserved.
Development of Flight-Test Performance Estimation Techniques for Small Unmanned Aerial Systems
NASA Astrophysics Data System (ADS)
McCrink, Matthew Henry
This dissertation provides a flight-testing framework for assessing the performance of fixed-wing, small-scale unmanned aerial systems (sUAS) by leveraging sub-system models of components unique to these vehicles. The development of the sub-system models, and their links to broader impacts on sUAS performance, is the key contribution of this work. The sub-system modeling and analysis focuses on the vehicle's propulsion, navigation and guidance, and airframe components. Quantification of the uncertainty in the vehicle's power available and control states is essential for assessing the validity of both the methods and results obtained from flight-tests. Therefore, detailed propulsion and navigation system analyses are presented to validate the flight testing methodology. Propulsion system analysis required the development of an analytic model of the propeller in order to predict the power available over a range of flight conditions. The model is based on the blade element momentum (BEM) method. Additional corrections are added to the basic model in order to capture the Reynolds-dependent scale effects unique to sUAS. The model was experimentally validated using a ground based testing apparatus. The BEM predictions and experimental analysis allow for a parameterized model relating the electrical power, measurable during flight, to the power available required for vehicle performance analysis. Navigation system details are presented with a specific focus on the sensors used for state estimation, and the resulting uncertainty in vehicle state. Uncertainty quantification is provided by detailed calibration techniques validated using quasi-static and hardware-in-the-loop (HIL) ground based testing. The HIL methods introduced use a soft real-time flight simulator to provide inertial quality data for assessing overall system performance. Using this tool, the uncertainty in vehicle state estimation based on a range of sensors, and vehicle operational environments is presented. The propulsion and navigation system models are used to evaluate flight-testing methods for evaluating fixed-wing sUAS performance. A brief airframe analysis is presented to provide a foundation for assessing the efficacy of the flight-test methods. The flight-testing presented in this work is focused on validating the aircraft drag polar, zero-lift drag coefficient, and span efficiency factor. Three methods are detailed and evaluated for estimating these design parameters. Specific focus is placed on the influence of propulsion and navigation system uncertainty on the resulting performance data. Performance estimates are used in conjunction with the propulsion model to estimate the impact sensor and measurement uncertainty on the endurance and range of a fixed-wing sUAS. Endurance and range results for a simplistic power available model are compared to the Reynolds-dependent model presented in this work. Additional parameter sensitivity analysis related to state estimation uncertainties encountered in flight-testing are presented. Results from these analyses indicate that the sub-system models introduced in this work are of first-order importance, on the order of 5-10% change in range and endurance, in assessing the performance of a fixed-wing sUAS.
Downing, Harriet; Thomas-Jones, Emma; Gal, Micaela; Waldron, Cherry-Ann; Sterne, Jonathan; Hollingworth, William; Hood, Kerenza; Delaney, Brendan; Little, Paul; Howe, Robin; Wootton, Mandy; Macgowan, Alastair; Butler, Christopher C; Hay, Alastair D
2012-07-19
Urinary tract infection (UTI) is common in children, and may cause serious illness and recurrent symptoms. However, obtaining a urine sample from young children in primary care is challenging and not feasible for large numbers. Evidence regarding the predictive value of symptoms, signs and urinalysis for UTI in young children is urgently needed to help primary care clinicians better identify children who should be investigated for UTI. This paper describes the protocol for the Diagnosis of Urinary Tract infection in Young children (DUTY) study. The overall study aim is to derive and validate a cost-effective clinical algorithm for the diagnosis of UTI in children presenting to primary care acutely unwell. DUTY is a multicentre, diagnostic and prospective observational study aiming to recruit at least 7,000 children aged before their fifth birthday, being assessed in primary care for any acute, non-traumatic, illness of ≤ 28 days duration. Urine samples will be obtained from eligible consented children, and data collected on medical history and presenting symptoms and signs. Urine samples will be dipstick tested in general practice and sent for microbiological analysis. All children with culture positive urines and a random sample of children with urine culture results in other, non-positive categories will be followed up to record symptom duration and healthcare resource use. A diagnostic algorithm will be constructed and validated and an economic evaluation conducted.The primary outcome will be a validated diagnostic algorithm using a reference standard of a pure/predominant growth of at least >103, but usually >105 CFU/mL of one, but no more than two uropathogens.We will use logistic regression to identify the clinical predictors (i.e. demographic, medical history, presenting signs and symptoms and urine dipstick analysis results) most strongly associated with a positive urine culture result. We will then use economic evaluation to compare the cost effectiveness of the candidate prediction rules. This study will provide novel, clinically important information on the diagnostic features of childhood UTI and the cost effectiveness of a validated prediction rule, to help primary care clinicians improve the efficiency of their diagnostic strategy for UTI in young children.
2012-01-01
Background Urinary tract infection (UTI) is common in children, and may cause serious illness and recurrent symptoms. However, obtaining a urine sample from young children in primary care is challenging and not feasible for large numbers. Evidence regarding the predictive value of symptoms, signs and urinalysis for UTI in young children is urgently needed to help primary care clinicians better identify children who should be investigated for UTI. This paper describes the protocol for the Diagnosis of Urinary Tract infection in Young children (DUTY) study. The overall study aim is to derive and validate a cost-effective clinical algorithm for the diagnosis of UTI in children presenting to primary care acutely unwell. Methods/design DUTY is a multicentre, diagnostic and prospective observational study aiming to recruit at least 7,000 children aged before their fifth birthday, being assessed in primary care for any acute, non-traumatic, illness of ≤ 28 days duration. Urine samples will be obtained from eligible consented children, and data collected on medical history and presenting symptoms and signs. Urine samples will be dipstick tested in general practice and sent for microbiological analysis. All children with culture positive urines and a random sample of children with urine culture results in other, non-positive categories will be followed up to record symptom duration and healthcare resource use. A diagnostic algorithm will be constructed and validated and an economic evaluation conducted. The primary outcome will be a validated diagnostic algorithm using a reference standard of a pure/predominant growth of at least >103, but usually >105 CFU/mL of one, but no more than two uropathogens. We will use logistic regression to identify the clinical predictors (i.e. demographic, medical history, presenting signs and symptoms and urine dipstick analysis results) most strongly associated with a positive urine culture result. We will then use economic evaluation to compare the cost effectiveness of the candidate prediction rules. Discussion This study will provide novel, clinically important information on the diagnostic features of childhood UTI and the cost effectiveness of a validated prediction rule, to help primary care clinicians improve the efficiency of their diagnostic strategy for UTI in young children. PMID:22812651
Actual curriculum development practices instrument: Testing for factorial validity
NASA Astrophysics Data System (ADS)
Foi, Liew Yon; Bakar, Kamariah Abu; Hamzah, Mohd Sahandri Gani; Alwi, Nor Hayati
2014-09-01
The Actual Curriculum Development Practices Instrument (ACDP-I) was developed and the factorial validity of the ACDP-I was tested (n = 107) using exploratory factor analysis procedures in the earlier work of [1]. Despite the ACDP-I appears to be content and construct valid instrument with very high internal reliability qualities for using in Malaysia, the accumulated evidences are still needed to provide a sound scientific basis for the proposed score interpretations. Therefore, the present study addresses this concern by utilising the confirmatory factor analysis to further confirm the theoretical structure of the variable Actual Curriculum Development Practices (ACDP) and enrich the psychometrical properties of ACDP-I. Results of this study have practical implication to both researchers and educators whose concerns focus on teachers' classroom practices and the instrument development and validation process.
Ocean Observations with EOS/MODIS: Algorithm Development and Post Launch Studies
NASA Technical Reports Server (NTRS)
Gordon, Howard R.; Conboy, Barbara (Technical Monitor)
1999-01-01
This separation has been logical thus far; however, as launch of AM-1 approaches, it must be recognized that many of these activities will shift emphasis from algorithm development to validation. For example, the second, third, and fifth bullets will become almost totally validation-focussed activities in the post-launch era, providing the core of our experimental validation effort. Work under the first bullet will continue into the post-launch time frame, driven in part by algorithm deficiencies revealed as a result of validation activities. Prior to the start of the 1999 fiscal year (FY99) we were requested to prepare a brief plan for our FY99 activities. This plan is included as Appendix 1. The present report describes the progress made on our planned activities.
[Nursing on the Web: the creation and validation process of a web site on coronary artery disease].
Marques, Isaac Rosa; Marin, Heimar de Fátima
2002-01-01
The World Wide Web is an important health information research source. A challenge for the Brazilian Nursing Informatics area is to use its potential to promote health education. This paper aims to present a developing and validating model used in an educational Web site, named CardioSite, which subject is Coronary Heart Disease. In its creation it was adopted a method with phases of conceptual modeling, development, implementation, and evaluation. In the evaluation phase, the validation was performed through an online informatics and health experts panel. The results demonstrated that information was reliable and valid. Considering that national official systems are not available to that approach, this model demonstrated effectiveness in assessing the quality of the Web site content.
Ruuska, Salla; Hämäläinen, Wilhelmiina; Kajava, Sari; Mughal, Mikaela; Matilainen, Pekka; Mononen, Jaakko
2018-03-01
The aim of the present study was to evaluate empirically confusion matrices in device validation. We compared the confusion matrix method to linear regression and error indices in the validation of a device measuring feeding behaviour of dairy cattle. In addition, we studied how to extract additional information on classification errors with confusion probabilities. The data consisted of 12 h behaviour measurements from five dairy cows; feeding and other behaviour were detected simultaneously with a device and from video recordings. The resulting 216 000 pairs of classifications were used to construct confusion matrices and calculate performance measures. In addition, hourly durations of each behaviour were calculated and the accuracy of measurements was evaluated with linear regression and error indices. All three validation methods agreed when the behaviour was detected very accurately or inaccurately. Otherwise, in the intermediate cases, the confusion matrix method and error indices produced relatively concordant results, but the linear regression method often disagreed with them. Our study supports the use of confusion matrix analysis in validation since it is robust to any data distribution and type of relationship, it makes a stringent evaluation of validity, and it offers extra information on the type and sources of errors. Copyright © 2018 Elsevier B.V. All rights reserved.
Symbolic control of visual attention: semantic constraints on the spatial distribution of attention.
Gibson, Bradley S; Scheutz, Matthias; Davis, Gregory J
2009-02-01
Humans routinely use spatial language to control the spatial distribution of attention. In so doing, spatial information may be communicated from one individual to another across opposing frames of reference, which in turn can lead to inconsistent mappings between symbols and directions (or locations). These inconsistencies may have important implications for the symbolic control of attention because they can be translated into differences in cue validity, a manipulation that is known to influence the focus of attention. This differential validity hypothesis was tested in Experiment 1 by comparing spatial word cues that were predicted to have high learned spatial validity ("above/below") and low learned spatial validity ("left/right"). Consistent with this prediction, when two measures of selective attention were used, the results indicated that attention was less focused in response to "left/right" cues than in response to "above/below" cues, even when the actual validity of each of the cues was equal. In addition, Experiment 2 predicted that spatial words such as "left/right" would have lower spatial validity than would other directional symbols that specify direction along the horizontal axis, such as "<--/-->" cues. The results were also consistent with this hypothesis. Altogether, the present findings demonstrate important semantic-based constraints on the spatial distribution of attention.
Validation of Groundwater Models: Meaningful or Meaningless?
NASA Astrophysics Data System (ADS)
Konikow, L. F.
2003-12-01
Although numerical simulation models are valuable tools for analyzing groundwater systems, their predictive accuracy is limited. People who apply groundwater flow or solute-transport models, as well as those who make decisions based on model results, naturally want assurance that a model is "valid." To many people, model validation implies some authentication of the truth or accuracy of the model. History matching is often presented as the basis for model validation. Although such model calibration is a necessary modeling step, it is simply insufficient for model validation. Because of parameter uncertainty and solution non-uniqueness, declarations of validation (or verification) of a model are not meaningful. Post-audits represent a useful means to assess the predictive accuracy of a site-specific model, but they require the existence of long-term monitoring data. Model testing may yield invalidation, but that is an opportunity to learn and to improve the conceptual and numerical models. Examples of post-audits and of the application of a solute-transport model to a radioactive waste disposal site illustrate deficiencies in model calibration, prediction, and validation.
NASA Technical Reports Server (NTRS)
Hook, Simon J.
2008-01-01
The presentation includes an introduction, Lake Tahoe site layout and measurements, Salton Sea site layout and measurements, field instrument calibration and cross-calculations, data reduction methodology and error budgets, and example results for MODIS. Summary and conclusions are: 1) Lake Tahoe CA/NV automated validation site was established in 1999 to assess radiometric accuracy of satellite and airborne mid and thermal infrared data and products. Water surface temperatures range from 4-25C.2) Salton Sea CA automated validation site was established in 2008 to broaden range of available water surface temperatures and atmospheric water vapor test cases. Water surface temperatures range from 15-35C. 3) Sites provide all information necessary for validation every 2 mins (bulk temperature, skin temperature, air temperature, wind speed, wind direction, net radiation, relative humidity). 4) Sites have been used to validate mid and thermal infrared data and products from: ASTER, AATSR, ATSR2, MODIS-Terra, MODIS-Aqua, Landsat 5, Landsat 7, MTI, TES, MASTER, MAS. 5) Approximately 10 years of data available to help validate AVHRR.
RBANS Validity Indices: a Systematic Review and Meta-Analysis.
Shura, Robert D; Brearly, Timothy W; Rowland, Jared A; Martindale, Sarah L; Miskey, Holly M; Duff, Kevin
2018-05-16
Neuropsychology practice organizations have highlighted the need for thorough evaluation of performance validity as part of the neuropsychological assessment process. Embedded validity indices are derived from existing measures and expand the scope of validity assessment. The Repeatable Battery for the Assessment of Neuropsychological Status (RBANS) is a brief instrument that quickly allows a clinician to assess a variety of cognitive domains. The RBANS also contains multiple embedded validity indicators. The purpose of this study was to synthesize the utility of those indicators to assess performance validity. A systematic search was completed, resulting in 11 studies for synthesis and 10 for meta-analysis. Data were synthesized on four indices and three subtests across samples of civilians, service members, and veterans. Sufficient data for meta-analysis were only available for the Effort Index, and related analyses indicated optimal cutoff scores of ≥1 (AUC = .86) and ≥ 3 (AUC = .85). However, outliers and heterogeneity were present indicating the importance of age and evaluation context. Overall, embedded validity indicators have shown adequate diagnostic accuracy across a variety of populations. Recommendations for interpreting these measures and future studies are provided.
Nonlinear saturation of tearing mode islands.
Hastie, R J; Militello, F; Porcelli, F
2005-08-05
New, rigorous results for the tearing island saturation problem are presented. These results are valid for the realistic case where the magnetic island structure is non-symmetric about the reconnection surface and the electron temperature, on which the electrical resistivity depends, is evolved self-consistently with the island growth.
ERIC Educational Resources Information Center
Wells, John
2015-01-01
Investigating the content presented at annual national conferences is regarded by many as a valid means for revealing patterns within a given professional organization concerning their interests, issues, concerns, priorities, and research foci, which collectively present an opportunity to provide future direction for the organization. As a result,…
A Pointing Out and Naming Paradigm to Support Radiological Teaching and Case-Oriented Learning.
ERIC Educational Resources Information Center
Van Cleynenbreugel, J.; And Others
1994-01-01
The use of computer programs for authoring and presenting case materials in professional instruction in radiology is discussed. A workstation-based multimedia program for presenting and annotating images accompanied by both voice and text is described. Comments are also included on validity results and student response. (MSE)
Additional extensions to the NASCAP computer code, volume 2
NASA Technical Reports Server (NTRS)
Stannard, P. R.; Katz, I.; Mandell, M. J.
1982-01-01
Particular attention is given to comparison of the actural response of the SCATHA (Spacecraft Charging AT High Altitudes) P78-2 satellite with theoretical (NASCAP) predictions. Extensive comparisons for a variety of environmental conditions confirm the validity of the NASCAP model. A summary of the capabilities and range of validity of NASCAP is presented, with extensive reference to previously published applications. It is shown that NASCAP is capable of providing quantitatively accurate results when the object and environment are adequately represented and fall within the range of conditions for which NASCAP was intended. Three dimensional electric field affects play an important role in determining the potential of dielectric surfaces and electrically isolated conducting surfaces, particularly in the presence of artificially imposed high voltages. A theory for such phenomena is presented and applied to the active control experiments carried out in SCATHA, as well as other space and laboratory experiments. Finally, some preliminary work toward modeling large spacecraft in polar Earth orbit is presented. An initial physical model is presented including charge emission. A simple code based upon the model is described along with code test results.
Development and validation of a nutrition knowledge questionnaire for a Canadian population.
Bradette-Laplante, Maude; Carbonneau, Élise; Provencher, Véronique; Bégin, Catherine; Robitaille, Julie; Desroches, Sophie; Vohl, Marie-Claude; Corneau, Louise; Lemieux, Simone
2017-05-01
The present study aimed to develop and validate a nutrition knowledge questionnaire in a sample of French Canadians from the province of Quebec, taking into account dietary guidelines. A thirty-eight-item questionnaire was developed by the research team and evaluated for content validity by an expert panel, and then administered to respondents. Face validity and construct validity were measured in a pre-test. Exploratory factor analysis and covariance structure analysis were performed to verify the structure of the questionnaire and identify problematic items. Internal consistency and test-retest reliability were evaluated through a validation study. Online survey. Six nutrition and psychology experts, fifteen registered dietitians (RD) and 180 lay people participated. Content validity evaluation resulted in the removal of two items and reformulation of one item. Following face validity, one item was reformulated. Construct validity was found to be adequate, with higher scores for RD v. non-RD (21·5 (sd 2·1) v. 15·7 (sd 3·0) out of 24, P<0·001). Exploratory factor analysis revealed that the questionnaire contained only one factor. Covariance structure analysis led to removal of sixteen items. Internal consistency for the overall questionnaire was adequate (Cronbach's α=0·73). Assessment of test-retest reliability resulted in significant associations for the total knowledge score (r=0·59, P<0·001). This nutrition knowledge questionnaire was found to be a suitable instrument which can be used to measure levels of nutrition knowledge in a Canadian population. It could also serve as a model for the development of similar instruments in other populations.
Debener, Stefan; Emkes, Reiner; Volkening, Nils; Fudickar, Sebastian; Bleichner, Martin G.
2017-01-01
Objective Our aim was the development and validation of a modular signal processing and classification application enabling online electroencephalography (EEG) signal processing on off-the-shelf mobile Android devices. The software application SCALA (Signal ProCessing and CLassification on Android) supports a standardized communication interface to exchange information with external software and hardware. Approach In order to implement a closed-loop brain-computer interface (BCI) on the smartphone, we used a multiapp framework, which integrates applications for stimulus presentation, data acquisition, data processing, classification, and delivery of feedback to the user. Main Results We have implemented the open source signal processing application SCALA. We present timing test results supporting sufficient temporal precision of audio events. We also validate SCALA with a well-established auditory selective attention paradigm and report above chance level classification results for all participants. Regarding the 24-channel EEG signal quality, evaluation results confirm typical sound onset auditory evoked potentials as well as cognitive event-related potentials that differentiate between correct and incorrect task performance feedback. Significance We present a fully smartphone-operated, modular closed-loop BCI system that can be combined with different EEG amplifiers and can easily implement other paradigms. PMID:29349070
Establishment of a VISAR Measurement System for Material Model Validation in DSTO
2013-02-01
advancements published in the works by L.M. Baker, E.R. Hollenbach and W.F. Hemsing [1-3] and results in the user-friendly interface and configuration of the...VISAR system [4] used in the current work . VISAR tests are among the mandatory instrumentation techniques when validating material models and...The present work reports on preliminary tests using the recently commissioned DSTO VISAR system, providing an assessment of the experimental set-up
Tabrizi, Yousef Moghadas; Zangiabadi, Nasser; Mazhari, Shahrzad; Zolala, Farzaneh
2013-01-01
Objective Motor imagery (MI) has been recently considered as an adjunct to physical rehabilitation in patients with multiple sclerosis (MS). It is necessary to assess MI abilities and benefits in patients with MS by using a reliable tool. The Kinesthetic and Visual Imagery Questionnaire (KVIQ) was recently developed to assess MI ability in patients with stroke and other disabilities. Considering the different underlying pathologies, the present study aimed to examine the validity and reliability of the KVIQ in MS patients. Method Fifteen MS patients were assessed using the KVIQ in 2 sessions (5-14days apart) by the same examiner. In the second session, the participants also completed a revised MI questionnaire (MIQ-R) as the gold standard. Intra-class correlation coefficients (ICCs) were measured to determine test-retest reliability. Spearman's correlation analysis was performed to assess concurrent validity with the MIQ-R. Furthermore, the internal consistency (Cronbach's alpha) and factorial structure of the KVIQ were studied. Results The test-retest reliability for the KVIQ was good (ICCs: total KVIQ=0.89, visual KVIQ=0.85, and kinesthetic KVIQ=0.93), and the concurrent validity between the KVIQ and MIQ-R was good (r=0.79). The KVIQ had good internal consistency, with high Cronbach's alpha (alpha=0.84). Factorial analysis showed the bi-factorial structure of the KVIQ, which was explained by visual=57.6% and kinesthetic=32.4%. Conclusions The results of the present study revealed that the KVIQ is a valid and reliable tool for assessing MI in MS patients. PMID:24271091
German translation, cultural adaptation, and validation of the Health Literacy Questionnaire (HLQ).
Nolte, Sandra; Osborne, Richard H; Dwinger, Sarah; Elsworth, Gerald R; Conrad, Melanie L; Rose, Matthias; Härter, Martin; Dirmaier, Jörg; Zill, Jördis M
2017-01-01
The Health Literacy Questionnaire (HLQ), developed in Australia in 2012 using a 'validity-driven' approach, has been rapidly adopted and is being applied in many countries and languages. It is a multidimensional measure comprising nine distinct domains that may be used for surveys, needs assessment, evaluation and outcomes assessment as well as for informing service improvement and the development of interventions. The aim of this paper is to describe the German translation of the HLQ and to present the results of the validation of the culturally adapted version. The HLQ comprises 44 items, which were translated and culturally adapted to the German context. This study uses data collected from a sample of 1,058 persons with chronic conditions. Statistical analyses include descriptive and confirmatory factor analyses. In one-factor congeneric models, all scales demonstrated good fit after few model adjustments. In a single, highly restrictive nine-factor model (no cross-loadings, no correlated errors) replication of the original English-language version was achieved with fit indices and psychometric properties similar to the original HLQ. Reliability for all scales was excellent, with a Cronbach's Alpha of at least 0.77. High to very high correlations between some HLQ factors were observed, suggesting that higher order factors may be present. Our rigorous development and validation protocol, as well as strict adaptation processes, have generated a remarkable reproduction of the HLQ in German. The results of this validation provide evidence that the HLQ is robust and can be recommended for use in German-speaking populations. German Clinical Trial Registration (DRKS): DRKS00000584. Registered 23 March 2011.
Design and Technical Validation of a Telemedicine Service for Rural Healthcare in Ecuador.
Vasquez-Cevallos, Leonel A; Bobokova, Jana; González-Granda, Patricia V; Iniesta, José M; Gómez, Enrique J; Hernando, M Elena
2017-12-12
Telemedicine is becoming increasingly important in Ecuador, especially in areas such as rural primary healthcare and medical education. Rural telemedicine programs in the country need to be strengthened by means of a technological platform adapted to local surroundings and offering advantages such as access to specialized care, continuing education, and so on, combined with modest investment requirements. This present article presents the design of a Telemedicine Platform (TMP) for rural healthcare services in Ecuador and a preliminary technical validation with medical students and teachers. An initial field study was designed to capture the requirements of the TMP. In a second phase, the TMP was validated in an academic environment along three consecutive academic courses. Assessment was by means of user polls and analyzing user interactions as registered automatically by the platform. The TMP was developed using Web-based technology and open code software. One hundred twenty-four students and 6 specialized faculty members participated in the study, conducting a total of 262 teleconsultations of clinical cases and 226 responses, respectively. The validation results show that the TMP is a useful communication tool for the documentation and discussion of clinical cases. Moreover, its usage may be recommended as a teaching methodology, to strengthen the skills of medical undergraduates. The results indicate that implementing the system in rural healthcare services in Ecuador would be feasible.
Martins, Danielly da Fonte Carvalho; Florindo, Lorena Coimbra; Machado, Anna Karolina Mouzer da Silva; Todeschini, Vítor; Sangoi, Maximiliano da Silva
2017-11-01
This study presents the development and validation of UV spectrophotometric methods for the determination of pinaverium bromide (PB) in tablet assay and dissolution studies. The methods were satisfactorily validated according to International Conference on Harmonization guidelines. The response was linear (r2 > 0.99) in the concentration ranges of 2-14 μg/mL at 213 nm and 10-70 μg/mL at 243 nm. The LOD and LOQ were 0.39 and 1.31 μg/mL, respectively, at 213 nm. For the 243 nm method, the LOD and LOQ were 2.93 and 9.77 μg/mL, respectively. Precision was evaluated by RSD, and the obtained results were lower than 2%. Adequate accuracy was also obtained. The methods proved to be robust using a full factorial design evaluation. For PB dissolution studies, the best conditions were achieved using a United States Pharmacopeia Dissolution Apparatus 2 (paddle) at 50 rpm and with 900 mL 0.1 M hydrochloric acid as the dissolution medium, presenting satisfactory results during the validation tests. In addition, the kinetic parameters of drug release were investigated using model-dependent methods, and the dissolution profiles were best described by the first-order model. Therefore, the proposed methods were successfully applied for the assay and dissolution analysis of PB in commercial tablets.
Michałowski, Jarosław M; Droździel, Dawid; Matuszewski, Jacek; Koziejowski, Wojtek; Jednoróg, Katarzyna; Marchewka, Artur
2017-08-01
Emotionally charged pictorial materials are frequently used in phobia research, but no existing standardized picture database is dedicated to the study of different phobias. The present work describes the results of two independent studies through which we sought to develop and validate this type of database-a Set of Fear Inducing Pictures (SFIP). In Study 1, 270 fear-relevant and 130 neutral stimuli were rated for fear, arousal, and valence by four groups of participants; small-animal (N = 34), blood/injection (N = 26), social-fearful (N = 35), and nonfearful participants (N = 22). The results from Study 1 were employed to develop the final version of the SFIP, which includes fear-relevant images of social exposure (N = 40), blood/injection (N = 80), spiders/bugs (N = 80), and angry faces (N = 30), as well as 726 neutral photographs. In Study 2, we aimed to validate the SFIP in a sample of spider, blood/injection, social-fearful, and control individuals (N = 66). The fear-relevant images were rated as being more unpleasant and led to greater fear and arousal in fearful than in nonfearful individuals. The fear images differentiated between the three fear groups in the expected directions. Overall, the present findings provide evidence for the high validity of the SFIP and confirm that the set may be successfully used in phobia research.
NASA Astrophysics Data System (ADS)
Araújo, J. P. C.; DA Silva, L. M.; Dourado, F. A. D.; Fernandes, N.
2015-12-01
Landslides are the most damaging natural hazard in the mountainous region of Rio de Janeiro State in Brazil, responsible for thousands of deaths and important financial and environmental losses. However, this region has currently few landslide susceptibility maps implemented on an adequate scale. Identification of landslide susceptibility areas is fundamental in successful land use planning and management practices to reduce risk. This paper applied the Bayes' theorem based on weight of evidence (WoE) using 8 landslide-related factors in a geographic information system (GIS) for landslide susceptibility mapping. 378 landslide locations were identified and mapped on a selected basin in the city of Nova Friburgo, triggered by the January 2011 rainfall event. The landslide scars were divided into two subsets: training and validation subsets. The 8 landslide-related factors weighted by WoE were performed using chi-square test to indicate which variables are conditionally independent of each other to be used in the final map. Finally, the maps of weighted factors were summed up to construct the landslide susceptibility map and validated by the validation landslide subset. According to the results, slope, aspect and contribution area showed the higher positive spatial correlation with landslides. In the landslide susceptibility map, 21% of the area presented very low and low susceptibilities with 3% of the validation scars, 41% presented medium susceptibility with 22% of the validation scars and 38% presented high and very high susceptibilities with 75% of the validation scars. The very high susceptibility class stands for 16% of the basin area and has 54% of the all scars. The approach used in this study can be considered very useful since 75% of the area affected by landslides was included in the high and very high susceptibility classes.
Corno, Giulia; Molinari, Guadalupe; Baños, Rosa Maria
2016-01-01
The aim of this study is to explore the psychometric properties of an affect scale, the Scale of Positive and Negative Experience (SPANE), in an Italian-speaking population. The results of this study demonstrate that the Italian version of the SPANE has psychometric properties similar to those shown by the original and previous versions, and it presents satisfactory reliability and factorial validity. The results of the Confirmatory Factor Analysis support the expected two-factor structure, positive and negative feeling, which characterized the previous versions. As expected, measures of negative affect, anxiety, negative future expectances, and depression correlated positively with the negative experiences SPANE subscale, and negatively with the positive experiences SPANE subscale. Results of this study demonstrate that the Italian version of the SPANE has psychometric properties similar to those shown by the original and previous versions, and it presents satisfactory reliability and factorial validity. The use of this instrument provides clinically useful information about a person’s overall emotional experience and it is an indicator of well-being. Although further studies are required to confirm the psychometric characteristics of the scale, the SPANE Italian version is expected to improve theoretical and empirical research on the well-being of the Italian population.
Panagiotopoulou, O.; Wilshin, S. D.; Rayfield, E. J.; Shefelbine, S. J.; Hutchinson, J. R.
2012-01-01
Finite element modelling is well entrenched in comparative vertebrate biomechanics as a tool to assess the mechanical design of skeletal structures and to better comprehend the complex interaction of their form–function relationships. But what makes a reliable subject-specific finite element model? To approach this question, we here present a set of convergence and sensitivity analyses and a validation study as an example, for finite element analysis (FEA) in general, of ways to ensure a reliable model. We detail how choices of element size, type and material properties in FEA influence the results of simulations. We also present an empirical model for estimating heterogeneous material properties throughout an elephant femur (but of broad applicability to FEA). We then use an ex vivo experimental validation test of a cadaveric femur to check our FEA results and find that the heterogeneous model matches the experimental results extremely well, and far better than the homogeneous model. We emphasize how considering heterogeneous material properties in FEA may be critical, so this should become standard practice in comparative FEA studies along with convergence analyses, consideration of element size, type and experimental validation. These steps may be required to obtain accurate models and derive reliable conclusions from them. PMID:21752810
Tinnitus Screener: Results From the First 100 Participants in an Epidemiology Study.
Henry, James A; Griest, Susan; Austin, Don; Helt, Wendy; Gordon, Jane; Thielman, Emily; Theodoroff, Sarah M; Lewis, M Samantha; Blankenship, Cody; Zaugg, Tara L; Carlson, Kathleen
2016-06-01
In the Noise Outcomes in Servicemembers Epidemiology Study, Veterans recently separated from the military undergo comprehensive assessments to initiate long-term monitoring of their auditory function. We developed the Tinnitus Screener, a four-item algorithmic instrument that determines whether tinnitus is present and, if so, whether it is constant or intermittent, or whether only temporary tinnitus has been experienced. Predictive validity data are presented for the first 100 Noise Outcomes in Servicemembers Epidemiology Study participants. The Tinnitus Screener was administered to participants by telephone. In lieu of a gold standard for determining tinnitus presence, the predictive validity of the tinnitus category assigned to participants on the basis of the Screener results was assessed when the participants attended audiologic testing. Of the 100 participants, 67 screened positive for intermittent or constant tinnitus. Three were categorized as "temporary" tinnitus only, and 30 were categorized as "no tinnitus." Tinnitus categorization was predictively valid with 96 of the 100 participants. These results provide preliminary evidence that the Screener may be suitable for quickly determining essential parameters of reported tinnitus. We have since revised the instrument to differentiate acute from chronic tinnitus and to identify occasional tinnitus. We are also obtaining measures that will enable assessment of its test-retest reliability.
Validation of MHD Models using MST RFP Plasmas
NASA Astrophysics Data System (ADS)
Jacobson, C. M.; Chapman, B. E.; den Hartog, D. J.; McCollam, K. J.; Sarff, J. S.; Sovinec, C. R.
2017-10-01
Rigorous validation of computational models used in fusion energy sciences over a large parameter space and across multiple magnetic configurations can increase confidence in their ability to predict the performance of future devices. MST is a well diagnosed reversed-field pinch (RFP) capable of operation with plasma current ranging from 60 kA to 500 kA. The resulting Lundquist number S, a key parameter in resistive magnetohydrodynamics (MHD), ranges from 4 ×104 to 8 ×106 for standard RFP plasmas and provides substantial overlap with MHD RFP simulations. MST RFP plasmas are simulated using both DEBS, a nonlinear single-fluid visco-resistive MHD code, and NIMROD, a nonlinear extended MHD code, with S ranging from 104 to 105 for single-fluid runs, and the magnetic Prandtl number Pm = 1 . Validation metric comparisons are presented, focusing on how normalized magnetic fluctuations at the edge b scale with S. Preliminary results for the dominant n = 6 mode are b S - 0 . 20 +/- 0 . 02 for single-fluid NIMROD, b S - 0 . 25 +/- 0 . 05 for DEBS, and b S - 0 . 20 +/- 0 . 02 for experimental measurements, however there is a significant discrepancy in mode amplitudes. Preliminary two-fluid NIMROD results are also presented. Work supported by US DOE.
A Model for Pharmacological Research-Treatment of Cocaine Dependence
Montoya, Ivan D.; Hess, Judith M.; Preston, Kenzie L.; Gorelick, David A.
2008-01-01
Major problems for research on pharmacological treatments for cocaine dependence are lack of comparability of results from different treatment research programs and poor validity and/or reliability of results. Double-blind, placebo-controlled, random assignment, experimental designs, using standard intake and assessment procedures help to reduce these problems. Cessation or reduction of drug use and/or craving, retention in treatment, and medical and psychosocial improvement are some of the outcome variables collected in treatment research programs. A model to be followed across different outpatient clinical trials for pharmacological treatment of cocaine dependence is presented here. This model represents an effort to standardize data collection to make results more valid and comparable. PMID:8749725
Coble, M D; Buckleton, J; Butler, J M; Egeland, T; Fimmers, R; Gill, P; Gusmão, L; Guttman, B; Krawczak, M; Morling, N; Parson, W; Pinto, N; Schneider, P M; Sherry, S T; Willuweit, S; Prinz, M
2016-11-01
The use of biostatistical software programs to assist in data interpretation and calculate likelihood ratios is essential to forensic geneticists and part of the daily case work flow for both kinship and DNA identification laboratories. Previous recommendations issued by the DNA Commission of the International Society for Forensic Genetics (ISFG) covered the application of bio-statistical evaluations for STR typing results in identification and kinship cases, and this is now being expanded to provide best practices regarding validation and verification of the software required for these calculations. With larger multiplexes, more complex mixtures, and increasing requests for extended family testing, laboratories are relying more than ever on specific software solutions and sufficient validation, training and extensive documentation are of upmost importance. Here, we present recommendations for the minimum requirements to validate bio-statistical software to be used in forensic genetics. We distinguish between developmental validation and the responsibilities of the software developer or provider, and the internal validation studies to be performed by the end user. Recommendations for the software provider address, for example, the documentation of the underlying models used by the software, validation data expectations, version control, implementation and training support, as well as continuity and user notifications. For the internal validations the recommendations include: creating a validation plan, requirements for the range of samples to be tested, Standard Operating Procedure development, and internal laboratory training and education. To ensure that all laboratories have access to a wide range of samples for validation and training purposes the ISFG DNA commission encourages collaborative studies and public repositories of STR typing results. Published by Elsevier Ireland Ltd.
Impact of syncope on quality of life: validation of a measure in patients undergoing tilt testing.
Nave-Leal, Elisabete; Oliveira, Mário; Pais-Ribeiro, José; Santos, Sofia; Oliveira, Eunice; Alves, Teresa; Cruz Ferreira, Rui
2015-03-01
Recurrent syncope has a significant impact on quality of life. The development of measurement scales to assess this impact that are easy to use in clinical settings is crucial. The objective of the present study is a preliminary validation of the Impact of Syncope on Quality of Life questionnaire for the Portuguese population. The instrument underwent a process of translation, validation, analysis of cultural appropriateness and cognitive debriefing. A population of 39 patients with a history of recurrent syncope (>1 year) who underwent tilt testing, aged 52.1 ± 16.4 years (21-83), 43.5% male, most in active employment (n=18) or retired (n=13), constituted a convenience sample. The resulting Portuguese version is similar to the original, with 12 items in a single aggregate score, and underwent statistical validation, with assessment of reliability, validity and stability over time. With regard to reliability, the internal consistency of the scale is 0.9. Assessment of convergent and discriminant validity showed statistically significant results (p<0.01). Regarding stability over time, a test-retest of this instrument at six months after tilt testing with 22 patients of the sample who had not undergone any clinical intervention found no statistically significant changes in quality of life. The results indicate that this instrument is of value for assessing quality of life in patients with recurrent syncope in Portugal. Copyright © 2014 Sociedade Portuguesa de Cardiologia. Published by Elsevier España. All rights reserved.
V&V of MCNP 6.1.1 Beta Against Intermediate and High-Energy Experimental Data
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mashnik, Stepan G
This report presents a set of validation and verification (V&V) MCNP 6.1.1 beta results calculated in parallel, with MPI, obtained using its event generators at intermediate and high-energies compared against various experimental data. It also contains several examples of results using the models at energies below 150 MeV, down to 10 MeV, where data libraries are normally used. This report can be considered as the forth part of a set of MCNP6 Testing Primers, after its first, LA-UR-11-05129, and second, LA-UR-11-05627, and third, LA-UR-26944, publications, but is devoted to V&V with the latest, 1.1 beta version of MCNP6. The MCNP6more » test-problems discussed here are presented in the /VALIDATION_CEM/and/VALIDATION_LAQGSM/subdirectories in the MCNP6/Testing/directory. README files that contain short descriptions of every input file, the experiment, the quantity of interest that the experiment measures and its description in the MCNP6 output files, and the publication reference of that experiment are presented for every test problem. Templates for plotting the corresponding results with xmgrace as well as pdf files with figures representing the final results of our V&V efforts are presented. Several technical “bugs” in MCNP 6.1.1 beta were discovered during our current V&V of MCNP6 while running it in parallel with MPI using its event generators. These “bugs” are to be fixed in the following version of MCNP6. Our results show that MCNP 6.1.1 beta using its CEM03.03, LAQGSM03.03, Bertini, and INCL+ABLA, event generators describes, as a rule, reasonably well different intermediate- and high-energy measured data. This primer isn’t meant to be read from cover to cover. Readers may skip some sections and go directly to any test problem in which they are interested.« less
NASA Technical Reports Server (NTRS)
Seybert, A. F.; Wu, T. W.; Wu, X. F.
1994-01-01
This research report is presented in three parts. In the first part, acoustical analyses were performed on modes of vibration of the housing of a transmission of a gear test rig developed by NASA. The modes of vibration of the transmission housing were measured using experimental modal analysis. The boundary element method (BEM) was used to calculate the sound pressure and sound intensity on the surface of the housing and the radiation efficiency of each mode. The radiation efficiency of each of the transmission housing modes was then compared to theoretical results for a finite baffled plate. In the second part, analytical and experimental validation of methods to predict structural vibration and radiated noise are presented. A rectangular box excited by a mechanical shaker was used as a vibrating structure. Combined finite element method (FEM) and boundary element method (BEM) models of the apparatus were used to predict the noise level radiated from the box. The FEM was used to predict the vibration, while the BEM was used to predict the sound intensity and total radiated sound power using surface vibration as the input data. Vibration predicted by the FEM model was validated by experimental modal analysis; noise predicted by the BEM was validated by measurements of sound intensity. Three types of results are presented for the total radiated sound power: sound power predicted by the BEM model using vibration data measured on the surface of the box; sound power predicted by the FEM/BEM model; and sound power measured by an acoustic intensity scan. In the third part, the structure used in part two was modified. A rib was attached to the top plate of the structure. The FEM and BEM were then used to predict structural vibration and radiated noise respectively. The predicted vibration and radiated noise were then validated through experimentation.
Social Skills Questionnaire for Argentinean College Students (SSQ-U) Development and Validation.
Morán, Valeria E; Olaz, Fabián O; Del Prette, Zilda A P
2015-11-27
In this paper we present a new instrument called Social Skills Questionnaire for Argentinean College Students (SSQ-U). Based on the adapted version of the Social Skills Inventory - Del Prette (SSI-Del Prette) (Olaz, Medrano, Greco, & Del Prette, 2009), we wrote new items for the scale, and carried out psychometric analysis to assess the validity and reliability of the instrument. In the first study, we collected evidence based on test content through expert judges who evaluated the quality and the relevance of the items. In the second and third studies, we provided validity evidence based on the internal structure of the instrument using exploratory (n = 1067) and confirmatory (n = 661) factor analysis. Results suggested a five-factor structure consistent with the dimensions of social skills, as proposed by Kelly (2002). The fit indexes corresponding to the obtained model were adequate, and composite reliability coefficients of each factor were excellent (above .75). Finally, in the fourth study, we provided evidence of convergent and discriminant validity. The obtained results allow us to conclude that the SSQ-U is the first valid and reliable instrument for measuring social skills in Argentinean college students.
Gray, Laura; Falzon, Charlène; Bergamaschi, Alessandro; Schuft, Laura; Durant, Jacques; Rosenthal, Eric; Pradier, Christian; Duracinsky, Martin; Rouanet, Isabelle; Colson, Serge S; d'Arripe-Longueville, Fabienne
2016-11-14
The main objective of the current study was to develop and validate a French exercise stereotype scale for people living with HIV (PLHIV) in order to gain visibility to the possible barriers and facilitators for exercise in PLHIV and thus enhance their quality of life. A series of four complementary studies was carried out with a total sample of 524 participants to: (a) develop a preliminary version of the HIV Exercise Stereotype Scale (HIVESS) (Stage 1), (b) confirm the factorial structure of the instrument (Stage 2), (c) evaluate the stability of the instrument (Stage 3), and (d) examine the construct and divergent validity of the scale (Stage 4). Results provided support for a 14-item scale with three sub-scales reporting stereotypes related to exercise benefits, exercise risks and lack of capacity for exercise with Cronbach's alphas of .77, .69 and .76 respectively. Results showed good factorial structure, strong reliability and indicators of convergent validity relating to self-efficacy, exercise and quality of life. The HIVESS presented satisfactory psychometric properties, constitutes a reliable and valid instrument to measure exercise stereotypes among PLHIV and has applications for future research and clinical practice.
1990-06-01
for Synthetic Validation for Entry- Level Army Jobs, Crafts, J. ; Szenas, P.L. ; Chia, W.J.; Pulakos, E.D. December 1988. (AD A205 438) This review...presents relevant literature in the areas of synthetic validation, job component models, and expert judgments. Synthetic validation is a logical...for synthetic validation, presents a model of the steps to establish linkages, reviews and evaluates synthetic validation studies in terms of how
Genesis of breath sounds-Preliminary verification of theory
NASA Technical Reports Server (NTRS)
Patterson, J. L.; Hardin, J. C.; Seiner, J. M.
1980-01-01
Experimental results are presented which tend to validate a previously developed theory of sound production in the human lung over a particular Reynolds number range. In addition, a new, presently nonunderstood, phenomenon was observed at higher Reynolds number. These results, which show how sound generation in the lung depends upon the physiologically important variables of volume flow rate and bronchial diameter, have potentially important application in noninvasive lung examination and the diagnosis of lung disease.
Chaos in War: Is It Present and What Does It Mean?
1994-06-01
the Poincare map. The results of this work indicated that chaos is, in fact, present in warfare. The implications of this result include IV...confirmed the validity of our software and provided us with the Poincare maps and the power spectrum. LTC Pentland of the School for Advanced...nearly identical initial conditions for the logistics equation 20 8 . Poincare map 22 9. Phase-space trajectories of chaotic systems 23 10
Berry, Christopher M; Zhao, Peng
2015-01-01
Predictive bias studies have generally suggested that cognitive ability test scores overpredict job performance of African Americans, meaning these tests are not predictively biased against African Americans. However, at least 2 issues call into question existing over-/underprediction evidence: (a) a bias identified by Aguinis, Culpepper, and Pierce (2010) in the intercept test typically used to assess over-/underprediction and (b) a focus on the level of observed validity instead of operational validity. The present study developed and utilized a method of assessing over-/underprediction that draws on the math of subgroup regression intercept differences, does not rely on the biased intercept test, allows for analysis at the level of operational validity, and can use meta-analytic estimates as input values. Therefore, existing meta-analytic estimates of key parameters, corrected for relevant statistical artifacts, were used to determine whether African American job performance remains overpredicted at the level of operational validity. African American job performance was typically overpredicted by cognitive ability tests across levels of job complexity and across conditions wherein African American and White regression slopes did and did not differ. Because the present study does not rely on the biased intercept test and because appropriate statistical artifact corrections were carried out, the present study's results are not affected by the 2 issues mentioned above. The present study represents strong evidence that cognitive ability tests generally overpredict job performance of African Americans. (c) 2015 APA, all rights reserved.
Research to Support Intelligent Data Management
NASA Technical Reports Server (NTRS)
Lerner, B. T.
1998-01-01
This final report details the contract performance and analysis of research and development results obtained during the contract period. KT-Tech's research and development work results in the areas of registration of remotely sensed data and the test evaluation and porting of the Regional Validation Center software system are presented.
UAS Integration in the NAS Project: Part Task 6 V & V Simulation: Primary Results
NASA Technical Reports Server (NTRS)
Rorie, Conrad; Fern, Lisa; Shively, Jay; Santiago, Confesor
2016-01-01
This is a presentation of the preliminary results on final V and V (Verification and Validation) activity of [RTCA (Radio Technical Commission for Aeronautics)] SC (Special Committee)-228 DAA (Detect and Avoid) HMI (Human-Machine Interface) requirements for display alerting and guidance.
Research to Support Intelligent Data Management
NASA Technical Reports Server (NTRS)
Lerner, Bao-Ting
1998-01-01
This final report details the contract performance and analysis of research and development results obtained during the contract period. KT-TECH's research and development work results in the areas of registration of remotely sensed data and the test evaluation and porting of the Regional Validation Center software system, are presented.
The Development and Validation of a Revised Version of the Math Anxiety Scale for Young Children.
Ganley, Colleen M; McGraw, Amanda L
2016-01-01
Although there is an extensive amount of research that examines the relation between math anxiety and math performance in adolescents and adults, little work has focused on this relation in young children. Recently more attention has been paid to the early development of math anxiety, and new measures have been created for use with this age group. In the present study, we report on the development and validation of a revised version of the Math Anxiety Scale for Young Children (MASYC; Harari et al., 2013). We conducted cognitive interviews with the 12 MASYC items with nine children and then administered the MASYC and five newly-developed items to 296 first-, second- and third-grade children. Results from cognitive interviews show that three of the items from the original scale were being systematically misinterpreted by young children. We present a revised measure (the MASYC-R) consisting of 13 items (eight original, five newly-developed) that shows strong evidence for reliability and validity. Results also showed that a small, but meaningful, proportion of children at this age show signs of high math anxiety. Validity of the MASYC-R was supported through correlations with a number of other factors, including general anxiety, math performance, and math attitudes. In addition, results suggest that a substantial proportion of the variance in math anxiety can be explained from these other variables together. The findings suggest that the MASYC-R is appropriate for use with young children and can help researchers to answer important questions about the nature and development of math anxiety at this age.
The Development and Validation of a Revised Version of the Math Anxiety Scale for Young Children
Ganley, Colleen M.; McGraw, Amanda L.
2016-01-01
Although there is an extensive amount of research that examines the relation between math anxiety and math performance in adolescents and adults, little work has focused on this relation in young children. Recently more attention has been paid to the early development of math anxiety, and new measures have been created for use with this age group. In the present study, we report on the development and validation of a revised version of the Math Anxiety Scale for Young Children (MASYC; Harari et al., 2013). We conducted cognitive interviews with the 12 MASYC items with nine children and then administered the MASYC and five newly-developed items to 296 first-, second- and third-grade children. Results from cognitive interviews show that three of the items from the original scale were being systematically misinterpreted by young children. We present a revised measure (the MASYC-R) consisting of 13 items (eight original, five newly-developed) that shows strong evidence for reliability and validity. Results also showed that a small, but meaningful, proportion of children at this age show signs of high math anxiety. Validity of the MASYC-R was supported through correlations with a number of other factors, including general anxiety, math performance, and math attitudes. In addition, results suggest that a substantial proportion of the variance in math anxiety can be explained from these other variables together. The findings suggest that the MASYC-R is appropriate for use with young children and can help researchers to answer important questions about the nature and development of math anxiety at this age. PMID:27605917
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mueller, Don; Rearden, Bradley T; Reed, Davis Allan
2010-01-01
One of the challenges associated with implementation of burnup credit is the validation of criticality calculations used in the safety evaluation; in particular the availability and use of applicable critical experiment data. The purpose of the validation is to quantify the relationship between reality and calculated results. Validation and determination of bias and bias uncertainty require the identification of sets of critical experiments that are similar to the criticality safety models. A principal challenge for crediting fission products (FP) in a burnup credit safety evaluation is the limited availability of relevant FP critical experiments for bias and bias uncertainty determination.more » This paper provides an evaluation of the available critical experiments that include FPs, along with bounding, burnup-dependent estimates of FP biases generated by combining energy dependent sensitivity data for a typical burnup credit application with the nuclear data uncertainty information distributed with SCALE 6. A method for determining separate bias and bias uncertainty values for individual FPs and illustrative results is presented. Finally, a FP bias calculation method based on data adjustment techniques and reactivity sensitivity coefficients calculated with the SCALE sensitivity/uncertainty tools and some typical results is presented. Using the methods described in this paper, the cross-section bias for a representative high-capacity spent fuel cask associated with the ENDF/B-VII nuclear data for 16 most important stable or near stable FPs is predicted to be no greater than 2% of the total worth of the 16 FPs, or less than 0.13 % k/k.« less
Simulation of laser beam reflection at the sea surface modeling and validation
NASA Astrophysics Data System (ADS)
Schwenger, Frédéric; Repasi, Endre
2013-06-01
A 3D simulation of the reflection of a Gaussian shaped laser beam on the dynamic sea surface is presented. The simulation is suitable for the pre-calculation of images for cameras operating in different spectral wavebands (visible, short wave infrared) for a bistatic configuration of laser source and receiver for different atmospheric conditions. In the visible waveband the calculated detected total power of reflected laser light from a 660nm laser source is compared with data collected in a field trial. Our computer simulation comprises the 3D simulation of a maritime scene (open sea/clear sky) and the simulation of laser beam reflected at the sea surface. The basic sea surface geometry is modeled by a composition of smooth wind driven gravity waves. To predict the view of a camera the sea surface radiance must be calculated for the specific waveband. Additionally, the radiances of laser light specularly reflected at the wind-roughened sea surface are modeled considering an analytical statistical sea surface BRDF (bidirectional reflectance distribution function). Validation of simulation results is prerequisite before applying the computer simulation to maritime laser applications. For validation purposes data (images and meteorological data) were selected from field measurements, using a 660nm cw-laser diode to produce laser beam reflection at the water surface and recording images by a TV camera. The validation is done by numerical comparison of measured total laser power extracted from recorded images with the corresponding simulation results. The results of the comparison are presented for different incident (zenith/azimuth) angles of the laser beam.
A robust high-throughput fungal biosensor assay for the detection of estrogen activity.
Zutz, Christoph; Wagener, Karen; Yankova, Desislava; Eder, Stefanie; Möstl, Erich; Drillich, Marc; Rychli, Kathrin; Wagner, Martin; Strauss, Joseph
2017-10-01
Estrogenic active compounds are present in a variety of sources and may alter biological functions in vertebrates. Therefore, it is crucial to develop innovative analytical systems that allow us to screen a broad spectrum of matrices and deliver fast and reliable results. We present the adaptation and validation of a fungal biosensor for the detection of estrogen activity in cow derived samples and tested the clinical applicability for pregnancy diagnosis in 140 mares and 120 cows. As biosensor we used a previously engineered genetically modified strain of the filamentous fungus Aspergillus nidulans, which contains the human estrogen receptor alpha and a reporter construct, in which β-galactosidase gene expression is controlled by an estrogen-responsive-element. The estrogen response of the fungal biosensor was validated with blood, urine, feces, milk and saliva. All matrices were screened for estrogenic activity prior to and after chemical extraction and the results were compared to an enzyme immunoassay (EIA). The biosensor showed consistent results in milk, urine and feces, which were comparable to those of the EIA. In contrast to the EIA, no sample pre-treatment by chemical extraction was needed. For 17β-estradiol, the biosensor showed a limit of detection of 1ng/L. The validation of the biosensor for pregnancy diagnosis revealed a specificity of 100% and a sensitivity of more than 97%. In conclusion, we developed and validated a highly robust fungal biosensor for detection of estrogen activity, which is highly sensitive and economic as it allows analyzing in high-throughput formats without the necessity for organic solvents. Copyright © 2017 Elsevier Inc. All rights reserved.
The space shuttle payload planning working groups. Volume 8: Earth and ocean physics
NASA Technical Reports Server (NTRS)
1973-01-01
The findings and recommendations of the Earth and Ocean Physics working group of the space shuttle payload planning activity are presented. The requirements for the space shuttle mission are defined as: (1) precision measurement for earth and ocean physics experiments, (2) development and demonstration of new and improved sensors and analytical techniques, (3) acquisition of surface truth data for evaluation of new measurement techniques, (4) conduct of critical experiments to validate geophysical phenomena and instrumental results, and (5) development and validation of analytical/experimental models for global ocean dynamics and solid earth dynamics/earthquake prediction. Tables of data are presented to show the flight schedule estimated costs, and the mission model.
Revell, James; Mirmehdi, Majid; McNally, Donal
2005-06-01
We present the development and validation of an image based speckle tracking methodology, for determining temporal two-dimensional (2-D) axial and lateral displacement and strain fields from ultrasound video streams. We refine a multiple scale region matching approach incorporating novel solutions to known speckle tracking problems. Key contributions include automatic similarity measure selection to adapt to varying speckle density, quantifying trajectory fields, and spatiotemporal elastograms. Results are validated using tissue mimicking phantoms and in vitro data, before applying them to in vivo musculoskeletal ultrasound sequences. The method presented has the potential to improve clinical knowledge of tendon pathology from carpel tunnel syndrome, inflammation from implants, sport injuries, and many others.
Agent-Based Simulation for Interconnection-Scale Renewable Integration and Demand Response Studies
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chassin, David P.; Behboodi, Sahand; Crawford, Curran
This paper collects and synthesizes the technical requirements, implementation, and validation methods for quasi-steady agent-based simulations of interconnectionscale models with particular attention to the integration of renewable generation and controllable loads. Approaches for modeling aggregated controllable loads are presented and placed in the same control and economic modeling framework as generation resources for interconnection planning studies. Model performance is examined with system parameters that are typical for an interconnection approximately the size of the Western Electricity Coordinating Council (WECC) and a control area about 1/100 the size of the system. These results are used to demonstrate and validate the methodsmore » presented.« less
Fajkowska, Małgorzata; Domaradzka, Ewa; Wytykowska, Agata
2018-01-01
The present paper is addressed to (1) the validation of a recently proposed typology of anxiety and depression, and (2) the presentation of a new tool—the Anxiety and Depression Questionnaire (ADQ)—based on this typology. Empirical data collected across two stages—construction and validation—allowed us to offer the final form of the ADQ, designed to measure arousal anxiety, apprehension anxiety, valence depression, anhedonic depression, and mixed types of anxiety and depression. The results support the proposed typology of anxiety and depression and provide evidence that the ADQ is a reliable and valid self-rating measure of affective types, and accordingly its use in scientific research is recommended. PMID:29410638
Agent-Based Simulation for Interconnection-Scale Renewable Integration and Demand Response Studies
Chassin, David P.; Behboodi, Sahand; Crawford, Curran; ...
2015-12-23
This paper collects and synthesizes the technical requirements, implementation, and validation methods for quasi-steady agent-based simulations of interconnectionscale models with particular attention to the integration of renewable generation and controllable loads. Approaches for modeling aggregated controllable loads are presented and placed in the same control and economic modeling framework as generation resources for interconnection planning studies. Model performance is examined with system parameters that are typical for an interconnection approximately the size of the Western Electricity Coordinating Council (WECC) and a control area about 1/100 the size of the system. These results are used to demonstrate and validate the methodsmore » presented.« less
Lohrer, Heinz; Nauck, Tanja; Korakakis, Vasileios; Malliaropoulos, Nikos
2016-10-24
The FASH (Functional Assessment Scale for Acute Hamstring Injuries) questionnaire has been recently developed as a disease-specific self-administered questionnaire for use in Greek, English, and German languages. Its psychometric qualities (validity and reliability) were tested only in Greek-speaking patients mainly representing track and field athletes. As hamstring injuries represent the most common football injury, we tested the validity and reliability of the FASH-G (G = German version) questionnaire in German-speaking footballers suffering from acute hamstring injuries. The FASH-G questionnaire was tested for reliability and validity, in 16 footballers with hamstring injuries (patients' group), 77 asymptomatic footballers (healthy group), and 19 field hockey players (at-risk group). Known-group validity was tested by comparing the total FASH-G scores of the injured and non-injured groups. Reliability of the FASH-G questionnaire was analysed in 18 asymptomatic footballers using the intra-class coefficient. Known-group validity was demonstrated by significant differences between injured and non-injured participants (p < 0.001). The FASH-G exhibited very good test-retest reliability (intra-class correlation coefficient = 0.982, p < 0.001). Internal consistency was excellent (α = 0.938). Compared with the results presented in the original publication, no statistical differences were found between healthy athletes (p = 0.257), but patients' groups and at-risk groups presented scoring differences (p = 0.040 and <0.001, respectively). The FASH-G is a valid and reliable instrument to assess and determine the severity of hamstring injuries in German footballers.
Chaspari, Theodora; Soldatos, Constantin; Maragos, Petros
2015-01-01
The development of ecologically valid procedures for collecting reliable and unbiased emotional data towards computer interfaces with social and affective intelligence targeting patients with mental disorders. Following its development, presented with, the Athens Emotional States Inventory (AESI) proposes the design, recording and validation of an audiovisual database for five emotional states: anger, fear, joy, sadness and neutral. The items of the AESI consist of sentences each having content indicative of the corresponding emotion. Emotional content was assessed through a survey of 40 young participants with a questionnaire following the Latin square design. The emotional sentences that were correctly identified by 85% of the participants were recorded in a soundproof room with microphones and cameras. A preliminary validation of AESI is performed through automatic emotion recognition experiments from speech. The resulting database contains 696 recorded utterances in Greek language by 20 native speakers and has a total duration of approximately 28 min. Speech classification results yield accuracy up to 75.15% for automatically recognizing the emotions in AESI. These results indicate the usefulness of our approach for collecting emotional data with reliable content, balanced across classes and with reduced environmental variability.
Comparison and validation of acoustic response models for wind noise reduction pipe arrays
DOE Office of Scientific and Technical Information (OSTI.GOV)
Marty, Julien; Denis, Stéphane; Gabrielson, Thomas
The detection capability of the infrasound component of the International Monitoring System (IMS) is tightly linked to the performance of its wind noise reduction systems. The wind noise reduction solution implemented at all IMS infrasound measurement systems consists of a spatial distribution of air inlets connected to the infrasound sensor through a network of pipes. This system, usually referred to as “pipe array,” has proven its efficiency in operational conditions. The objective of this paper is to present the results of the comparison and validation of three distinct acoustic response models for pipe arrays. The characteristics of the models andmore » the results obtained for a defined set of pipe array configurations are described. A field experiment using a newly developed infrasound generator, dedicated to the validation of these models, is then presented. The comparison between the modeled and empirical acoustic responses shows that two of the three models can be confidently used to estimate pipe array acoustic responses. Lastly, this study paves the way to the deconvolution of IMS infrasound data from pipe array responses and to the optimization of pipe array design to IMS applications.« less
Comparison and validation of acoustic response models for wind noise reduction pipe arrays
Marty, Julien; Denis, Stéphane; Gabrielson, Thomas; ...
2017-02-13
The detection capability of the infrasound component of the International Monitoring System (IMS) is tightly linked to the performance of its wind noise reduction systems. The wind noise reduction solution implemented at all IMS infrasound measurement systems consists of a spatial distribution of air inlets connected to the infrasound sensor through a network of pipes. This system, usually referred to as “pipe array,” has proven its efficiency in operational conditions. The objective of this paper is to present the results of the comparison and validation of three distinct acoustic response models for pipe arrays. The characteristics of the models andmore » the results obtained for a defined set of pipe array configurations are described. A field experiment using a newly developed infrasound generator, dedicated to the validation of these models, is then presented. The comparison between the modeled and empirical acoustic responses shows that two of the three models can be confidently used to estimate pipe array acoustic responses. Lastly, this study paves the way to the deconvolution of IMS infrasound data from pipe array responses and to the optimization of pipe array design to IMS applications.« less
NASA Astrophysics Data System (ADS)
Prakash, Satya; Mahesh, C.; Gairola, Rakesh M.
2011-12-01
Large-scale precipitation estimation is very important for climate science because precipitation is a major component of the earth's water and energy cycles. In the present study, the GOES precipitation index technique has been applied to the Kalpana-1 satellite infrared (IR) images of every three-hourly, i.e., of 0000, 0300, 0600,…., 2100 hours UTC, for rainfall estimation as a preparatory to the INSAT-3D. After the temperatures of all the pixels in a grid are known, they are distributed to generate a three-hourly 24-class histogram of brightness temperatures of IR (10.5-12.5 μm) images for a 1.0° × 1.0° latitude/longitude box. The daily, monthly, and seasonal rainfall have been estimated using these three-hourly rain estimates for the entire south-west monsoon period of 2009 in the present study. To investigate the potential of these rainfall estimates, the validation of monthly and seasonal rainfall estimates has been carried out using the Global Precipitation Climatology Project and Global Precipitation Climatology Centre data. The validation results show that the present technique works very well for the large-scale precipitation estimation qualitatively as well as quantitatively. The results also suggest that the simple IR-based estimation technique can be used to estimate rainfall for tropical areas at a larger temporal scale for climatological applications.
The Chinese version of the Outcome Expectations for Exercise scale: validation study.
Lee, Ling-Ling; Chiu, Yu-Yun; Ho, Chin-Chih; Wu, Shu-Chen; Watson, Roger
2011-06-01
Estimates of the reliability and validity of the English nine-item Outcome Expectations for Exercise (OEE) scale have been tested and found to be valid for use in various settings, particularly among older people, with good internal consistency and validity. Data on the use of the OEE scale among older Chinese people living in the community and how cultural differences might affect the administration of the OEE scale are limited. To test the validity and reliability of the Chinese version of the Outcome Expectations for Exercise scale among older people. A cross-sectional validation study was designed to test the Chinese version of the OEE scale (OEE-C). Reliability was examined by testing both the internal consistency for the overall scale and the squared multiple correlation coefficient for the single item measure. The validity of the scale was tested on the basis of both a traditional psychometric test and a confirmatory factor analysis using structural equation modelling. The Mokken Scaling Procedure (MSP) was used to investigate if there were any hierarchical, cumulative sets of items in the measure. The OEE-C scale was tested in a group of older people in Taiwan (n=108, mean age=77.1). There was acceptable internal consistency (alpha=.85) and model fit in the scale. Evidence of the validity of the measure was demonstrated by the tests for criterion-related validity and construct validity. There was a statistically significant correlation between exercise outcome expectations and exercise self-efficacy (r=.34, p<.01). An analysis of the Mokken Scaling Procedure found that nine items of the scale were all retained in the analysis and the resulting scale was reliable and statistically significant (p=.0008). The results obtained in the present study provided acceptable levels of reliability and validity evidence for the Chinese Outcome Expectations for Exercise scale when used with older people in Taiwan. Future testing of the OEE-C scale needs to be carried out to see whether these results are generalisable to older Chinese people living in urban areas. Copyright © 2010 Elsevier Ltd. All rights reserved.
Failure mode and effects analysis outputs: are they valid?
2012-01-01
Background Failure Mode and Effects Analysis (FMEA) is a prospective risk assessment tool that has been widely used within the aerospace and automotive industries and has been utilised within healthcare since the early 1990s. The aim of this study was to explore the validity of FMEA outputs within a hospital setting in the United Kingdom. Methods Two multidisciplinary teams each conducted an FMEA for the use of vancomycin and gentamicin. Four different validity tests were conducted: · Face validity: by comparing the FMEA participants’ mapped processes with observational work. · Content validity: by presenting the FMEA findings to other healthcare professionals. · Criterion validity: by comparing the FMEA findings with data reported on the trust’s incident report database. · Construct validity: by exploring the relevant mathematical theories involved in calculating the FMEA risk priority number. Results Face validity was positive as the researcher documented the same processes of care as mapped by the FMEA participants. However, other healthcare professionals identified potential failures missed by the FMEA teams. Furthermore, the FMEA groups failed to include failures related to omitted doses; yet these were the failures most commonly reported in the trust’s incident database. Calculating the RPN by multiplying severity, probability and detectability scores was deemed invalid because it is based on calculations that breach the mathematical properties of the scales used. Conclusion There are significant methodological challenges in validating FMEA. It is a useful tool to aid multidisciplinary groups in mapping and understanding a process of care; however, the results of our study cast doubt on its validity. FMEA teams are likely to need different sources of information, besides their personal experience and knowledge, to identify potential failures. As for FMEA’s methodology for scoring failures, there were discrepancies between the teams’ estimates and similar incidents reported on the trust’s incident database. Furthermore, the concept of multiplying ordinal scales to prioritise failures is mathematically flawed. Until FMEA’s validity is further explored, healthcare organisations should not solely depend on their FMEA results to prioritise patient safety issues. PMID:22682433
Castiel, D; Herve, C
1992-01-01
In general, a large number of patients is needed to conclude whether the results of a therapeutic strategy are significant or not. One can lower this number with a logit. The method has been proposed in an article published recently (Cost-utility analysis of early thrombolytic therapy, Pharmaco Economics, 1992). The present article is an essay aimed at validating the method, both from the econometric and ethical points of view.
[The effect of self-reflection on depression mediated by hardiness].
Nakajima, Miho; Hattori, Yosuke; Tanno, Yoshihiko
2015-10-01
Previous studies have shown that two types of private self-consciousness result in opposing effects on depression; one of which is self-rumination, which leads to maladaptive effect, and the other is self-reflection, which leads to an adaptive effect. Although a number of studies have examined the mechanism of the maladaptive effect of self-rumination, only a few studies have examined the mechanism of the adaptive effect of self-reflection. The present study examined the process of how self-reflection affected depression adaptively, Based on the previous findings, we proposed a hypothetical model assuming that hardiness acts as a mediator of self-reflection. To test the validity of the model, structural equation modeling analysis was performed with the cross-sectional data of 155 undergraduate students. The results. suggest that the hypothetical model is valid. According to the present results and previous findings, it is suggested that self-reflection is associated with low levels of depression and mediated by "rich commitment", one component of hardiness.
Modeling the spreading of large-scale wildland fires
Mohamed Drissi
2015-01-01
The objective of the present study is twofold. First, the last developments and validation results of a hybrid model designed to simulate fire patterns in heterogeneous landscapes are presented. The model combines the features of a stochastic small-world network model with those of a deterministic semi-physical model of the interaction between burning and non-burning...
NASA Technical Reports Server (NTRS)
Mcdougal, David S. (Editor)
1990-01-01
FIRE (First ISCCP Regional Experiment) is a U.S. cloud-radiation research program formed in 1984 to increase the basic understanding of cirrus and marine stratocumulus cloud systems, to develop realistic parameterizations for these systems, and to validate and improve ISCCP cloud product retrievals. Presentations of results culminating the first 5 years of FIRE research activities were highlighted. The 1986 Cirrus Intensive Field Observations (IFO), the 1987 Marine Stratocumulus IFO, the Extended Time Observations (ETO), and modeling activities are described. Collaborative efforts involving the comparison of multiple data sets, incorporation of data measurements into modeling activities, validation of ISCCP cloud parameters, and development of parameterization schemes for General Circulation Models (GCMs) are described.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Reynolds, William; Weber, Marta S.; Farber, Robert M.
Social Media provide an exciting and novel view into social phenomena. The vast amounts of data that can be gathered from the Internet coupled with massively parallel supercomputers such as the Cray XMT open new vistas for research. Conclusions drawn from such analysis must recognize that social media are distinct from the underlying social reality. Rigorous validation is essential. This paper briefly presents results obtained from computational analysis of social media - utilizing both blog and twitter data. Validation of these results is discussed in the context of a framework of established methodologies from the social sciences. Finally, an outlinemore » for a set of supporting studies is proposed.« less
Detrick, Paul; Chibnall, John T; Call, Cynthia
2010-09-01
Understanding and detecting response distortion is important in the high-demand circumstances of personnel selection. In this article, we describe positive response distortion on the Revised NEO Personality Inventory (NEO PI-R; Costa & McCrae, 1992) among police officer applicants under high and low demand conditions. Positive response distortion primarily reflected denial/minimization of Neuroticism and accentuation of traits associated with moralistic bias (Agreeableness and Conscientiousness). Validity of the NEO PI-R research validity scale, Positive Presentation Management, was weakly supported with respect to the Neuroticism domain only. Results will be useful in interpreting personality inventory results in the police personnel selection process.
SWAT Model Configuration, Calibration and Validation for Lake Champlain Basin
The Soil and Water Assessment Tool (SWAT) model was used to develop phosphorus loading estimates for sources in the Lake Champlain Basin. This document describes the model setup and parameterization, and presents calibration results.
Evaluation results for intelligent transportation systems
DOT National Transportation Integrated Search
2000-11-09
This presentation covers the methods of evaluation set out for EC-funded ITS research and demonstration projects, known as the CONVERGE validation quality process and the lessons learned from that approach. The new approach to appraisal, which is bei...
Economic analysis of model validation for a challenge problem
Paez, Paul J.; Paez, Thomas L.; Hasselman, Timothy K.
2016-02-19
It is now commonplace for engineers to build mathematical models of the systems they are designing, building, or testing. And, it is nearly universally accepted that phenomenological models of physical systems must be validated prior to use for prediction in consequential scenarios. Yet, there are certain situations in which testing only or no testing and no modeling may be economically viable alternatives to modeling and its associated testing. This paper develops an economic framework within which benefit–cost can be evaluated for modeling and model validation relative to other options. The development is presented in terms of a challenge problem. Asmore » a result, we provide a numerical example that quantifies when modeling, calibration, and validation yield higher benefit–cost than a testing only or no modeling and no testing option.« less
Bringing UAVs to the fight: recent army autonomy research and a vision for the future
NASA Astrophysics Data System (ADS)
Moorthy, Jay; Higgins, Raymond; Arthur, Keith
2008-04-01
The Unmanned Autonomous Collaborative Operations (UACO) program was initiated in recognition of the high operational burden associated with utilizing unmanned systems by both mounted and dismounted, ground and airborne warfighters. The program was previously introduced at the 62nd Annual Forum of the American Helicopter Society in May of 20061. This paper presents the three technical approaches taken and results obtained in UACO. All three approaches were validated extensively in contractor simulations, two were validated in government simulation, one was flight tested outside the UACO program, and one was flight tested in Part 2 of UACO. Results and recommendations are discussed regarding diverse areas such as user training and human-machine interface, workload distribution, UAV flight safety, data link bandwidth, user interface constructs, adaptive algorithms, air vehicle system integration, and target recognition. Finally, a vision for UAV As A Wingman is presented.
NASA Astrophysics Data System (ADS)
Nair, B. G.; Winter, N.; Daniel, B.; Ward, R. M.
2016-07-01
Direct measurement of the flow of electric current during VAR is extremely difficult due to the aggressive environment as the arc process itself controls the distribution of current. In previous studies the technique of “magnetic source tomography” was presented; this was shown to be effective but it used a computationally intensive iterative method to analyse the distribution of arc centre position. In this paper we present faster computational methods requiring less numerical optimisation to determine the centre position of a single distributed arc both numerically and experimentally. Numerical validation of the algorithms were done on models and experimental validation on measurements based on titanium and nickel alloys (Ti6Al4V and INCONEL 718). The results are used to comment on the effects of process parameters on arc behaviour during VAR.
Experimental aerothermodynamic research of hypersonic aircraft
NASA Technical Reports Server (NTRS)
Cleary, Joseph W.
1987-01-01
The 2-D and 3-D advance computer codes being developed for use in the design of such hypersonic aircraft as the National Aero-Space Plane require comparison of the computational results with a broad spectrum of experimental data to fully assess the validity of the codes. This is particularly true for complex flow fields with control surfaces present and for flows with separation, such as leeside flow. Therefore, the objective is to provide a hypersonic experimental data base required for validation of advanced computational fluid dynamics (CFD) computer codes and for development of more thorough understanding of the flow physics necessary for these codes. This is being done by implementing a comprehensive test program for a generic all-body hypersonic aircraft model in the NASA/Ames 3.5 foot Hypersonic Wind Tunnel over a broad range of test conditions to obtain pertinent surface and flowfield data. Results from the flow visualization portion of the investigation are presented.
A two-dimensional solution of the FW-H equation for rectilinear motion of sources
NASA Astrophysics Data System (ADS)
Bozorgi, Alireza; Siozos-Rousoulis, Leonidas; Nourbakhsh, Seyyed Ahmad; Ghorbaniasl, Ghader
2017-02-01
In this paper, a subsonic solution of the two-dimensional Ffowcs Williams and Hawkings (FW-H) equation is presented for calculation of noise generated by sources moving with constant velocity in a medium at rest or in a moving medium. The solution is represented in the frequency domain and is valid for observers located far from the noise sources. In order to verify the validity of the derived formula, three test cases are considered, namely a monopole, a dipole, and a quadrupole source in a medium at rest or in motion. The calculated results well coincide with the analytical solutions, validating the applicability of the formula to rectilinear subsonic motion problems.
Development and initial validation of the internalization of Asian American stereotypes scale.
Shen, Frances C; Wang, Yu-Wei; Swanson, Jane L
2011-07-01
This research consists of four studies on the initial reliability and validity of the Internalization of Asian American Stereotypes Scale (IAASS), a self-report instrument that measures the degree Asian Americans have internalized racial stereotypes about their own group. The results from the exploratory and confirmatory factor analyses support a stable four-factor structure of the IAASS: Difficulties with English Language Communication, Pursuit of Prestigious Careers, Emotional Reservation, and Expected Academic Success. Evidence for concurrent and discriminant validity is presented. High internal-consistency and test-retest reliability estimates are reported. A discussion of how this scale can contribute to research and practice regarding internalized stereotyping among Asian Americans is provided.
The development and cross-validation of an MMPI typology of murderers.
Holcomb, W R; Adams, N A; Ponder, H M
1985-06-01
A sample of 80 male offenders charged with premeditated murder were divided into five personality types using MMPI scores. A hierarchical clustering procedure was used with a subsequent internal cross-validation analysis using a second sample of 80 premeditated murderers. A Discriminant Analysis resulted in a 96.25% correct classification of subjects from the second sample into the five types. Clinical data from a mental status interview schedule supported the external validity of these types. There were significant differences among the five types in hallucinations, disorientation, hostility, depression, and paranoid thinking. Both similarities and differences of the present typology with prior research was discussed. Additional research questions were suggested.
Mostafavi, Seyed-Ali; Akhondzadeh, Shahin; Mohammadi, Mohammad Reza; Eshraghian, Mohammad Reza; Hosseini, Saeed; Chamari, Maryam; Keshavarz, Seyed Ali
2017-01-01
Objective : The Three-Factor Eating Questionnaire Reduced (TFEQ-R18) is one of the most widely used instruments for assessing eating behavior worldwide. The present study aimed at confirming the reliability and validity of the Persian version of TFEQ-R18 among overweight and obese females in Iran. Method: In the present study, 168 overweight and obese females consented to participate. We estimated the anthropometric indices and asked the participants to complete the TFEQ-R18. Beck Depression Inventory (BDI), Spielberger Anxiety Scale, Appetite Visual Analogue Rating Scale, Food Craving Questionnaire (FCQ), Compulsive Eating Scale (CES), and Restraint Eating Visual Analogue Rating Scale were performed simultaneously to assess concurrent validity. Two weeks later, TFEQ-R18 was repeated for 126 participants to assess test-retest reliability. Moreover, we reported the internal consistency and factor analysis of this questionnaire. Results: Using the results of the reliability analysis and exploratory factor analysis of the principal component by varimax rotation, we extracted 3 factors: hunger, cognitive restraint, and emotional eating. After removing the Items 16 and 18, the Cronbach’s alpha was increased to 0.73 (The Cronbach’s alpha of the factors was 0.84, 0.64, and 0.7, respectively). The results of the Pearson correlation revealed a consistency of 0.87 between the test and retest administrations (p = 0.001). Significant positive correlations were observed between TFEQ-R18 and BDI, Spielberger Anxiety Scale, FCQ, CES, appetite, body weight, fat percentage, and calorie intake. Moreover, a negative correlation was observed in Restraint Eating Visual Analogue Rating Scale and muscle percentage. Conclusion: This study aimed at presenting preliminary support for the reliability and validity of the Persian version of TFEQ-R18 and its psychometric characteristics. This instrument may be helpful in clinical practice and research studies of obesity, appetite, and eating behavior. PMID:28659982
Monacis, Lucia; Palo, Valeria de; Griffiths, Mark D; Sinatra, Maria
2016-12-01
Background and aims The inclusion of Internet Gaming Disorder (IGD) in Section III of the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders has increased the interest of researchers in the development of new standardized psychometric tools for the assessment of such a disorder. To date, the nine-item Internet Gaming Disorder Scale - Short-Form (IGDS9-SF) has only been validated in English, Portuguese, and Slovenian languages. Therefore, the aim of this investigation was to examine the psychometric properties of the IGDS9-SF in an Italian-speaking sample. Methods A total of 757 participants were recruited to the present study. Confirmatory factor analysis and multi-group analyses were applied to assess the construct validity. Reliability analyses comprised the average variance extracted, the standard error of measurement, and the factor determinacy coefficient. Convergent and criterion validities were established through the associations with other related constructs. The receiver operating characteristic curve analysis was used to determine an empirical cut-off point. Results Findings confirmed the single-factor structure of the instrument, its measurement invariance at the configural level, and the convergent and criterion validities. Satisfactory levels of reliability and a cut-off point of 21 were obtained. Discussion and conclusions The present study provides validity evidence for the use of the Italian version of the IGDS9-SF and may foster research into gaming addiction in the Italian context.
Monacis, Lucia; de Palo, Valeria; Griffiths, Mark D.; Sinatra, Maria
2016-01-01
Background and aims The inclusion of Internet Gaming Disorder (IGD) in Section III of the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders has increased the interest of researchers in the development of new standardized psychometric tools for the assessment of such a disorder. To date, the nine-item Internet Gaming Disorder Scale – Short-Form (IGDS9-SF) has only been validated in English, Portuguese, and Slovenian languages. Therefore, the aim of this investigation was to examine the psychometric properties of the IGDS9-SF in an Italian-speaking sample. Methods A total of 757 participants were recruited to the present study. Confirmatory factor analysis and multi-group analyses were applied to assess the construct validity. Reliability analyses comprised the average variance extracted, the standard error of measurement, and the factor determinacy coefficient. Convergent and criterion validities were established through the associations with other related constructs. The receiver operating characteristic curve analysis was used to determine an empirical cut-off point. Results Findings confirmed the single-factor structure of the instrument, its measurement invariance at the configural level, and the convergent and criterion validities. Satisfactory levels of reliability and a cut-off point of 21 were obtained. Discussion and conclusions The present study provides validity evidence for the use of the Italian version of the IGDS9-SF and may foster research into gaming addiction in the Italian context. PMID:27876422
High spatial validity is not sufficient to elicit voluntary shifts of attention.
Pauszek, Joseph R; Gibson, Bradley S
2016-10-01
Previous research suggests that the use of valid symbolic cues is sufficient to elicit voluntary shifts of attention. The present study interpreted this previous research within a broader theoretical context which contends that observers will voluntarily use symbolic cues to orient their attention in space when the temporal costs of using the cues are perceived to be less than the temporal costs of searching without the aid of the cues. In this view, previous research has not addressed the sufficiency of valid symbolic cues, because the temporal cost of using the cues is usually incurred before the target display appears. To address this concern, 70%-valid spatial word cues were presented simultaneously with a search display. In addition, other research suggests that opposing cue-dependent and cue-independent spatial biases may operate in these studies and alter standard measures of orienting. After identifying and controlling these opposing spatial biases, the results of two experiments showed that the word cues did not elicit voluntary shifts of attention when the search task was relatively easy but did when the search task was relatively difficult. Moreover, the findings also showed that voluntary use of the word cues changed over the course of the experiment when the task was difficult, presumably because the temporal cost of searching without the cue lessened as the task got easier with practice. Altogether, the present findings suggested that the factors underlying voluntary control are multifaceted and contextual, and that spatial validity alone is not sufficient to elicit voluntary shifts of attention.
Güiza, Fabian; Depreitere, Bart; Piper, Ian; Citerio, Giuseppe; Jorens, Philippe G; Maas, Andrew; Schuhmann, Martin U; Lo, Tsz-Yan Milly; Donald, Rob; Jones, Patricia; Maier, Gottlieb; Van den Berghe, Greet; Meyfroidt, Geert
2017-03-01
A model for early detection of episodes of increased intracranial pressure in traumatic brain injury patients has been previously developed and validated based on retrospective adult patient data from the multicenter Brain-IT database. The purpose of the present study is to validate this early detection model in different cohorts of recently treated adult and pediatric traumatic brain injury patients. Prognostic modeling. Noninterventional, observational, retrospective study. The adult validation cohort comprised recent traumatic brain injury patients from San Gerardo Hospital in Monza (n = 50), Leuven University Hospital (n = 26), Antwerp University Hospital (n = 19), Tübingen University Hospital (n = 18), and Southern General Hospital in Glasgow (n = 8). The pediatric validation cohort comprised patients from neurosurgical and intensive care centers in Edinburgh and Newcastle (n = 79). None. The model's performance was evaluated with respect to discrimination, calibration, overall performance, and clinical usefulness. In the recent adult validation cohort, the model retained excellent performance as in the original study. In the pediatric validation cohort, the model retained good discrimination and a positive net benefit, albeit with a performance drop in the remaining criteria. The obtained external validation results confirm the robustness of the model to predict future increased intracranial pressure events 30 minutes in advance, in adult and pediatric traumatic brain injury patients. These results are a large step toward an early warning system for increased intracranial pressure that can be generally applied. Furthermore, the sparseness of this model that uses only two routinely monitored signals as inputs (intracranial pressure and mean arterial blood pressure) is an additional asset.
Increased efficacy for in-house validation of real-time PCR GMO detection methods.
Scholtens, I M J; Kok, E J; Hougs, L; Molenaar, B; Thissen, J T N M; van der Voet, H
2010-03-01
To improve the efficacy of the in-house validation of GMO detection methods (DNA isolation and real-time PCR, polymerase chain reaction), a study was performed to gain insight in the contribution of the different steps of the GMO detection method to the repeatability and in-house reproducibility. In the present study, 19 methods for (GM) soy, maize canola and potato were validated in-house of which 14 on the basis of an 8-day validation scheme using eight different samples and five on the basis of a more concise validation protocol. In this way, data was obtained with respect to the detection limit, accuracy and precision. Also, decision limits were calculated for declaring non-conformance (>0.9%) with 95% reliability. In order to estimate the contribution of the different steps in the GMO analysis to the total variation variance components were estimated using REML (residual maximum likelihood method). From these components, relative standard deviations for repeatability and reproducibility (RSD(r) and RSD(R)) were calculated. The results showed that not only the PCR reaction but also the factors 'DNA isolation' and 'PCR day' are important factors for the total variance and should therefore be included in the in-house validation. It is proposed to use a statistical model to estimate these factors from a large dataset of initial validations so that for similar GMO methods in the future, only the PCR step needs to be validated. The resulting data are discussed in the light of agreed European criteria for qualified GMO detection methods.
Prediction of the effect of formulation on the toxicity of chemicals.
Mistry, Pritesh; Neagu, Daniel; Sanchez-Ruiz, Antonio; Trundle, Paul R; Vessey, Jonathan D; Gosling, John Paul
2017-01-01
Two approaches for the prediction of which of two vehicles will result in lower toxicity for anticancer agents are presented. Machine-learning models are developed using decision tree, random forest and partial least squares methodologies and statistical evidence is presented to demonstrate that they represent valid models. Separately, a clustering method is presented that allows the ordering of vehicles by the toxicity they show for chemically-related compounds.
Psychometric and cognitive validation of a social capital measurement tool in Peru and Vietnam.
De Silva, Mary J; Harpham, Trudy; Tuan, Tran; Bartolini, Rosario; Penny, Mary E; Huttly, Sharon R
2006-02-01
Social capital is a relatively new concept which has attracted significant attention in recent years. No consensus has yet been reached on how to measure social capital, resulting in a large number of different tools available. While psychometric validation methods such as factor analysis have been used by a few studies to assess the internal validity of some tools, these techniques rely on data already collected by the tool and are therefore not capable of eliciting what the questions are actually measuring. The Young Lives (YL) study includes quantitative measures of caregiver's social capital in four countries (Vietnam, Peru, Ethiopia, and India) using a short version of the Adapted Social Capital Assessment Tool (SASCAT). A range of different psychometric methods including factor analysis were used to evaluate the construct validity of SASCAT in Peru and Vietnam. In addition, qualitative cognitive interviews with 20 respondents from Peru and 24 respondents from Vietnam were conducted to explore what each question is actually measuring. We argue that psychometric validation techniques alone are not sufficient to adequately validate multi-faceted social capital tools for use in different cultural settings. Psychometric techniques show SASCAT to be a valid tool reflecting known constructs and displaying postulated links with other variables. However, results from the cognitive interviews present a more mixed picture with some questions being appropriately interpreted by respondents, and others displaying significant differences between what the researchers intended them to measure and what they actually do. Using evidence from a range of methods of assessing validity has enabled the modification of an existing instrument into a valid and low cost tool designed to measure social capital within larger surveys in Peru and Vietnam, with the potential for use in other developing countries following local piloting and cultural adaptation of the tool.
NASA 9-Point LDI Code Validation Experiment
NASA Technical Reports Server (NTRS)
Hicks, Yolanda R.; Anderson, Robert C.; Locke, Randy J.
2007-01-01
This presentation highlights the experimental work to date to obtain validation data using a 9-point lean direct injector (LDI) in support of the National Combustion Code. The LDI is designed to supply fuel lean, Jet-A and air directly into the combustor such that the liquid fuel atomizes and mixes rapidly to produce short flame zones and produce low levels of oxides of nitrogen and CO. We present NOx and CO emission results from gas sample data that support that aspect of the design concept. We describe this injector and show high speed movies of selected operating points. We present image-based species maps of OH, fuel, CH and NO obtained using planar laser induced fluorescence and chemiluminescence. We also present preliminary 2-component, axial and vertical, velocity vectors of the air flow obtained using particle image velocimetry and of the fuel drops in a combusting case. For the same combusting case, we show preliminary 3-component velocity vectors obtained using a phase Doppler anemometer. For the fueled, combusting cases especially, we found optical density is a technical concern that must be addressed, but that in general, these preliminary results are promising. All optical-based results confirm that this injector produces short flames, typically on the order of 5- to-7-mm long at typical cruise and high power engine cycle conditions.
Flexible energy harvesting from hard piezoelectric beams
NASA Astrophysics Data System (ADS)
Delnavaz, Aidin; Voix, Jérémie
2016-11-01
This paper presents design, multiphysics finite element modeling and experimental validation of a new miniaturized PZT generator that integrates a bulk piezoelectric ceramic onto a flexible platform for energy harvesting from the human body pressing force. In spite of its flexibility, the mechanical structure of the proposed device is simple to fabricate and efficient for the energy conversion. The finite element model involves both mechanical and piezoelectric parts of the device coupled with the electrical circuit model. The energy harvester prototype was fabricated and tested under the low frequency periodic pressing force during 10 seconds. The experimental results show that several nano joules of electrical energy is stored in a capacitor that is quite significant given the size of the device. The finite element model is validated by observing a good agreement between experimental and simulation results. the validated model could be used for optimizing the device for energy harvesting from earcanal deformations.
Validation of SAM 2 and SAGE satellite
NASA Technical Reports Server (NTRS)
Kent, G. S.; Wang, P.-H.; Farrukh, U. O.; Yue, G. K.
1987-01-01
Presented are the results of a validation study of data obtained by the Stratospheric Aerosol and Gas Experiment I (SAGE I) and Stratospheric Aerosol Measurement II (SAM II) satellite experiments. The study includes the entire SAGE I data set (February 1979 - November 1981) and the first four and one-half years of SAM II data (October 1978 - February 1983). These data sets have been validated by their use in the analysis of dynamical, physical and chemical processes in the stratosphere. They have been compared with other existing data sets and the SAGE I and SAM II data sets intercompared where possible. The study has shown the data to be of great value in the study of the climatological behavior of stratospheric aerosols and ozone. Several scientific publications and user-oriented data summaries have appeared as a result of the work carried out under this contract.
Validation of the Paranormal Health Beliefs Scale for adults.
Donizzetti, Anna Rosa; Petrillo, Giovanna
2017-01-01
We present the validation study of the Paranormal Health Beliefs Scale adult version, aimed to measure illusory beliefs about health. The scale was administered to 643 participants (54.3% females), having an average age of 29.7 years (standard deviation = 18.31). The results of the analyses confirmed the dimensions of the Paranormal Health Beliefs Scale as developed in the previous adolescent study (Beliefs: Religious, Superstitious, in Extraordinary Events, Parapsychological, and Pseudo-scientific of a biomedical nature), as well as the convergent and discriminant validity through the correlation with other constructs (locus of control and self-efficacy). The results also showed significant differences between subgroups by gender and age. The Paranormal Health Beliefs Scale shows satisfactory psychometric properties and thus may be used effectively to identify the varied range of illusory beliefs related to health, even within the context of lifelong educational programs aimed at health promotion.
Validation of the Paranormal Health Beliefs Scale for adults
Donizzetti, Anna Rosa; Petrillo, Giovanna
2017-01-01
We present the validation study of the Paranormal Health Beliefs Scale adult version, aimed to measure illusory beliefs about health. The scale was administered to 643 participants (54.3% females), having an average age of 29.7 years (standard deviation = 18.31). The results of the analyses confirmed the dimensions of the Paranormal Health Beliefs Scale as developed in the previous adolescent study (Beliefs: Religious, Superstitious, in Extraordinary Events, Parapsychological, and Pseudo-scientific of a biomedical nature), as well as the convergent and discriminant validity through the correlation with other constructs (locus of control and self-efficacy). The results also showed significant differences between subgroups by gender and age. The Paranormal Health Beliefs Scale shows satisfactory psychometric properties and thus may be used effectively to identify the varied range of illusory beliefs related to health, even within the context of lifelong educational programs aimed at health promotion. PMID:29379631
The Weight of Cognitions in Panic: The Link between Misinterpretations and Panic Attacks
De Cort, Klara; Hermans, Dirk; Noortman, Daphne; Arends, Wiesje; Griez, Eric J. L.; Schruers, Koen R. J.
2013-01-01
In cognitive theory it is hypothesized that panic attacks are provoked by catastrophic misinterpretations of bodily sensations. The aim of the present study was to investigate the ability of associated word pairs referring to catastrophic thinking (e.g. palpitations-heart attack) in producing panic attacks. Patients with PD (n = 20), patients with mixed anxiety disorders (n = 20), and a healthy control group (n = 30) participated in the present study. To enhance ecological validity we first conducted a stimulus validation experiment. Subsequently, nine suitable panic and neutral word pairs were presented in block to the participants. Anxiety levels were assessed before and after the presentation. PD patients were more anxious when reading these word pairs, compared to neutral word pairs. However, none of the participants experienced a panic attack upon reading the word pairs. From the present results it seems that catastrophic thinking is rather related to the anticipatory anxiety for panic attacks, but not necessarily with the occurrence of the panic attacks themselves. PMID:23940559
Self-stigma among concealable minorities in Hong Kong: conceptualization and unified measurement.
Mak, Winnie W S; Cheung, Rebecca Y M
2010-04-01
Self-stigma refers to the internalized stigma that individuals may have toward themselves as a result of their minority status. Not only can self-stigma dampen the mental health of individuals, it can deter them from seeking professional help lest disclosing their minority status lead to being shunned by service providers. No unified instrument has been developed to measure consistently self-stigma that could be applied to different concealable minority groups. The present study presented findings based on 4 studies on the development and validation of the Self-Stigma Scale, conducted in Hong Kong with community samples of mental health consumers, recent immigrants from Mainland China, and sexual minorities. Upon a series of validation procedures, a 9-item Self-Stigma Scale-Short Form was developed. Initial support on its reliability and construct validity (convergent and criterion validities) were found among 3 stigmatized groups. Utility of this unified measure was to establish an empirical basis upon which self-stigma of different concealable minority groups could be assessed under the same dimensions. Health-care professionals could make use of this short scale to assess potential self-stigmatization among concealable minorities, which may hamper their treatment process as well as their overall well-being.
Altmann, Tobias; Roth, Marcus
2018-01-01
Self-esteem stability describes fluctuations in the level of self-esteem experienced by individuals over a brief period of time. In recent decades, self-esteem stability has repeatedly been shown to be an important variable affecting psychological functioning. However, measures of self-esteem stability are few and lacking in validity. In this paper, we present the Self-Esteem Stability Scale (SESS), a unidimensional and very brief scale to directly assess self-esteem stability. In four studies (total N = 826), we describe the development of the SESS and present evidence for its validity with respect to individual outcomes (life satisfaction, neuroticism, and vulnerable narcissism) and dyadic outcomes (relationship satisfaction in self- and partner ratings) through direct comparisons with existing measures. The new SESS proved to be a stronger predictor than the existing scales and had incremental validity over and above self-esteem level. The results also showed that all cross-sectional measures of self-esteem stability were only moderately associated with variability in self-esteem levels assessed longitudinally with multiple administrations of the Rosenberg Self-Esteem Scale. We discuss this validity issue, arguing that direct and indirect assessment approaches measure relevant, yet different aspects of self-esteem stability. PMID:29487551
Design and control of compliant tensegrity robots through simulation and hardware validation
Caluwaerts, Ken; Despraz, Jérémie; Işçen, Atıl; Sabelhaus, Andrew P.; Bruce, Jonathan; Schrauwen, Benjamin; SunSpiral, Vytas
2014-01-01
To better understand the role of tensegrity structures in biological systems and their application to robotics, the Dynamic Tensegrity Robotics Lab at NASA Ames Research Center, Moffett Field, CA, USA, has developed and validated two software environments for the analysis, simulation and design of tensegrity robots. These tools, along with new control methodologies and the modular hardware components developed to validate them, are presented as a system for the design of actuated tensegrity structures. As evidenced from their appearance in many biological systems, tensegrity (‘tensile–integrity’) structures have unique physical properties that make them ideal for interaction with uncertain environments. Yet, these characteristics make design and control of bioinspired tensegrity robots extremely challenging. This work presents the progress our tools have made in tackling the design and control challenges of spherical tensegrity structures. We focus on this shape since it lends itself to rolling locomotion. The results of our analyses include multiple novel control approaches for mobility and terrain interaction of spherical tensegrity structures that have been tested in simulation. A hardware prototype of a spherical six-bar tensegrity, the Reservoir Compliant Tensegrity Robot, is used to empirically validate the accuracy of simulation. PMID:24990292
Altmann, Tobias; Roth, Marcus
2018-01-01
Self-esteem stability describes fluctuations in the level of self-esteem experienced by individuals over a brief period of time. In recent decades, self-esteem stability has repeatedly been shown to be an important variable affecting psychological functioning. However, measures of self-esteem stability are few and lacking in validity. In this paper, we present the Self-Esteem Stability Scale (SESS), a unidimensional and very brief scale to directly assess self-esteem stability. In four studies (total N = 826), we describe the development of the SESS and present evidence for its validity with respect to individual outcomes (life satisfaction, neuroticism, and vulnerable narcissism) and dyadic outcomes (relationship satisfaction in self- and partner ratings) through direct comparisons with existing measures. The new SESS proved to be a stronger predictor than the existing scales and had incremental validity over and above self-esteem level. The results also showed that all cross-sectional measures of self-esteem stability were only moderately associated with variability in self-esteem levels assessed longitudinally with multiple administrations of the Rosenberg Self-Esteem Scale. We discuss this validity issue, arguing that direct and indirect assessment approaches measure relevant, yet different aspects of self-esteem stability.
de Oliveira, Anapolino Macedo; Fonseca, Antônio Augusto; Camargos, Marcelo Fernandes; Orzil, Lívia Maria; Laguardia-Nascimento, Mateus; Oliveira, Anna Gabriella Guimarães; Rodrigues, Jacqueline Gomes; Sales, Mariana Lázaro; de Oliveira, Tatiana Flávia Pinheiro; de Melo, Cristiano Barros
2018-07-01
Vesicular stomatitis is an infectious disease that occurs mainly in countries of the Western Hemisphere and affects cattle, swine and horses. The clinical symptoms in cattle and swine are similar to foot-and-mouth disease and include vesicular ulceration of the tongue and mouth. The disease requires a rapid and accurate differential diagnosis, aiming for immediate implementation of control measures. The objective of the present study was to develop and perform validation tests of multiplex RT-qPCR(s) for the detection of RNA from Alagoas vesiculovirus, considering the parameters of sensitivity and analytical specificity, analytical performance (repeatability and reproducibility criteria) and the uncertainty of the measurement. The threshold cycle values obtained in triplicate from each sample were evaluated by considering the variations between days, analysts and equipment in an analysis of variance aimed at determining the variances of repeatability and reproducibility. The results showed that RT-qPCRs had excellent sensitivity and specificity in the detection of RNA of the Alagoas vesiculovirus. The validation parameters showed low coefficients of variation and were equivalent to those found in other validation studies, indicating that the tests presented excellent repeatability and reproducibility. Copyright © 2018 Elsevier B.V. All rights reserved.
Alternative methods to determine headwater benefits
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bao, Y.S.; Perlack, R.D.; Sale, M.J.
1997-11-10
In 1992, the Federal Energy Regulatory Commission (FERC) began using a Flow Duration Analysis (FDA) methodology to assess headwater benefits in river basins where use of the Headwater Benefits Energy Gains (HWBEG) model may not result in significant improvements in modeling accuracy. The purpose of this study is to validate the accuracy and appropriateness of the FDA method for determining energy gains in less complex basins. This report presents the results of Oak Ridge National Laboratory`s (ORNL`s) validation of the FDA method. The validation is based on a comparison of energy gains using the FDA method with energy gains calculatedmore » using the MWBEG model. Comparisons of energy gains are made on a daily and monthly basis for a complex river basin (the Alabama River Basin) and a basin that is considered relatively simple hydrologically (the Stanislaus River Basin). In addition to validating the FDA method, ORNL was asked to suggest refinements and improvements to the FDA method. Refinements and improvements to the FDA method were carried out using the James River Basin as a test case.« less
Butler, Leon H; Irons, Jessica G; Bassett, Drew T; Correia, Christopher J
2018-06-01
The multiple choice procedure (MCP) is used to assess the relative reinforcing value of concurrently available stimuli. The MCP was originally developed to assess the reinforcing value of drugs; the current within-subjects study employed the MCP to assess the reinforcing value of gambling behavior. Participants (N = 323) completed six versions of the MCP that presented hypothetical choices between money to be used while gambling ($10 or $25) versus escalating amounts of guaranteed money available immediately or after delays of either 1 week or 1 month. Results suggest that choices on the MCP are correlated with other measures of gambling behavior, thus providing concurrent validity data for using the MCP to quantify the relative reinforcing value of gambling. The MCP for gambling also displayed sensitivity to reinforcer magnitude and delay effects, which provides evidence of criterion validity. The results are consistent with a behavioral economic model of addiction and suggest that the MCP could be a valid tool for future research on gambling behavior.
NASA Technical Reports Server (NTRS)
Larar, A.; Zhou, D.; Smith, W.
2009-01-01
Advanced satellite sensors are tasked with improving global-scale measurements of the Earth's atmosphere, clouds, and surface to enable enhancements in weather prediction, climate monitoring, and environmental change detection. Validation of the entire measurement system is crucial to achieving this goal and thus maximizing research and operational utility of resultant data. Field campaigns employing satellite under-flights with well-calibrated FTS sensors aboard high-altitude aircraft are an essential part of this validation task. The National Polar-orbiting Operational Environmental Satellite System (NPOESS) Airborne Sounder Testbed-Interferometer (NAST-I) has been a fundamental contributor in this area by providing coincident high spectral/spatial resolution observations of infrared spectral radiances along with independently-retrieved geophysical products for comparison with like products from satellite sensors being validated. This paper focuses on some of the challenges associated with validating advanced atmospheric sounders and the benefits obtained from employing airborne interferometers such as the NAST-I. Select results from underflights of the Aqua Atmospheric InfraRed Sounder (AIRS) and the Infrared Atmospheric Sounding Interferometer (IASI) obtained during recent field campaigns will be presented.
Adaptation and validation of the Inventory of Family Protective Factors for the Portuguese culture
Augusto, Cláudia Cristina Vieira Carvalho de Oliveira Ferreira; Araújo, Beatriz Rodrigues; Rodrigues, Vítor Manuel Costa Pereira; de Figueiredo, Maria do Céu Aguiar Barbieri
2014-01-01
OBJECTIVES: to adapt and validate the Inventory of Family Protective Factors (IFPF) for the Portuguese culture. This instrument assesses protective factors that contribute to family resilience. Studies addressing resilience are embedded within the salutogenic paradigm, i.e. it addresses protective factors of individuals or groups without underestimating risk factors or vulnerability. METHOD: in order to assess the IFPF's linguistic and conceptual equivalence, the instrument was translated, retro-translated and the think-aloud protocol was used. We then verified the instrument's sensitiveness, reliability and validity of results to assess its psychometric characteristics. A factor analysis was performed of the principal components with varimax rotation of the scale's items and Cronbach's alpha coefficient was calculated for each dimension. A total of 85 families with disabled children, selected through simple random sampling, self-administered the instrument. RESULTS: the IFPF presents psychometric characteristics that are appropriate for the Portuguese population (Cronbach's alpha = .90). CONCLUSION: the IFPF was adapted and validated for the Portuguese culture and is an instrument to be used in studies intended to assess protective factors of family resilience. PMID:25591096
Development and Validation of New Discriminative Dissolution Method for Carvedilol Tablets
Raju, V.; Murthy, K. V. R.
2011-01-01
The objective of the present study was to develop and validate a discriminative dissolution method for evaluation of carvedilol tablets. Different conditions such as type of dissolution medium, volume of dissolution medium and rotation speed of paddle were evaluated. The best in vitro dissolution profile was obtained using Apparatus II (paddle), 50 rpm, 900 ml of pH 6.8 phosphate buffer as dissolution medium. The drug release was evaluated by high-performance liquid chromatographic method. The dissolution method was validated according to current ICH and FDA guidelines using parameters such as the specificity, accuracy, precision and stability were evaluated and obtained results were within the acceptable range. The comparison of the obtained dissolution profiles of three different products were investigated using ANOVA-based, model-dependent and model-independent methods, results showed that there is significant difference between the products. The dissolution test developed and validated was adequate for its higher discriminative capacity in differentiating the release characteristics of the products tested and could be applied for development and quality control of carvedilol tablets. PMID:22923865
Validity and reliability of the Diagnostic Adaptive Behaviour Scale.
Tassé, M J; Schalock, R L; Balboni, G; Spreat, S; Navas, P
2016-01-01
The Diagnostic Adaptive Behaviour Scale (DABS) is a new standardised adaptive behaviour measure that provides information for evaluating limitations in adaptive behaviour for the purpose of determining a diagnosis of intellectual disability. This article presents validity evidence and reliability data for the DABS. Validity evidence was based on comparing DABS scores with scores obtained on the Vineland Adaptive Behaviour Scale, second edition. The stability of the test scores was measured using a test and retest, and inter-rater reliability was assessed by computing the inter-respondent concordance. The DABS convergent validity coefficients ranged from 0.70 to 0.84, while the test-retest reliability coefficients ranged from 0.78 to 0.95, and the inter-rater concordance as measured by intraclass correlation coefficients ranged from 0.61 to 0.87. All obtained validity and reliability indicators were strong and comparable with the validity and reliability coefficients of the most commonly used adaptive behaviour instruments. These results and the advantages of the DABS for clinician and researcher use are discussed. © 2015 MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.
A content validity study of signs, symptoms and diseases/health problems expressed in LIBRAS.
Aragão, Jamilly da Silva; de França, Inacia Sátiro Xavier; Coura, Alexsandro Silva; de Sousa, Francisco Stélio; Batista, Joana D'arc Lyra; Magalhães, Isabella Medeiros de Oliveira
2015-01-01
To validate the content of signs, symptoms and diseases/health problems expressed in LIBRAS for people with deafness. Method: Methodological development study, which involved 36 people with deafness and three LIBRAS specialists. The study was conducted in three stages: investigation of the signs, symptoms and diseases/health problems, referred to by people with deafness, reported in a questionnaire; video recordings of how people with deafness express, through LIBRA, the signs, symptoms and diseases/health problems; and validation of the contents of the recordings of the expressions by LIBRAS specialists. Data were processed in a spreadsheet and analyzed using univariate tables, with absolute frequencies and percentages. The validation results were analyzed using the Content Validity Index (CVI). 33 expressions in LIBRAS, of signs, symptoms and diseases/health problems were evaluated, and 28 expressions obtained a satisfactory CVI (1.00). The signs, symptoms and diseases/health problems expressed in LIBRAS presented validity, in the study region, for health professionals, especially nurses, for use in the clinical anamnesis of the nursing consultation for people with deafness.
Rhebergen, Didi; Graham, Rebecca
2014-01-01
Dysthymic disorder and other chronic depressive disorders have recently been merged in DSM-5 into a 'persistent depressive disorder' category. As its introduction in DSM-III, the validity of dysthymic disorder has long been challenged, posing concerns regarding the validity of its successor--persistent depressive disorder. This review aims to present recent findings regarding the validity and utility of dysthymic disorder. Several recent studies raise questions regarding the validity of dysthymic disorder, namely, results indicating a significant overlap between dysthymic disorder and other mood and/or anxiety disorders, failure of such a diagnosis to predict illness outcome and the lack of any validation strategy identifying that it is a depressive entity or subtype. Research findings indicate that dysthymic disorder is a heterogeneous diagnosis encompassing many different depressive (and anxiety or personality weighted) conditions, and without clear evidence of its validity as a diagnostic entity. As dysthymic disorder is a key component of DSM-defined persistent depressive disorder--the latter is at similar risk of providing a heterogeneous domain diagnosis, and thus limiting identification of specific causative factors and preferential treatment modality.
Aristotle Meets Zeno: Psychophysiological Evidence
Papageorgiou, Charalabos; Stachtea, Xanthi; Papageorgiou, Panos; Alexandridis, Antonio T.
2016-01-01
This study, a tribute to Aristotle's 2400 years, used a juxtaposition of valid Aristotelian arguments to the paradoxes formulated by Zeno the Eleatic, in order to investigate the electrophysiological correlates of attentional and /or memory processing effects in the course of deductive reasoning. Participants undertook reasoning tasks based on visually presented arguments which were either (a) valid (Aristotelian) statements or (b) paradoxes. We compared brain activation patterns while participants maintained the premises / conclusions of either the valid statements or the paradoxes in working memory (WM). Event-related brain potentials (ERPs), specifically the P300 component of ERPs, were recorded during the WM phase, during which participants were required to draw a logical conclusion regarding the correctness of the valid syllogisms or the paradoxes. During the processing of paradoxes, results demonstrated a more positive event-related potential deflection (P300) across frontal regions, whereas processing of valid statements was associated with noticeable P300 amplitudes across parieto-occipital regions. These findings suggest that paradoxes mobilize frontal attention mechanisms, while valid deduction promotes parieto-occipital activity associated with attention and/or subsequent memory processing. PMID:28033333
Aristotle Meets Zeno: Psychophysiological Evidence.
Papageorgiou, Charalabos; Stachtea, Xanthi; Papageorgiou, Panos; Alexandridis, Antonio T; Tsaltas, Eleftheria; Angelopoulos, Elias
2016-01-01
This study, a tribute to Aristotle's 2400 years, used a juxtaposition of valid Aristotelian arguments to the paradoxes formulated by Zeno the Eleatic, in order to investigate the electrophysiological correlates of attentional and /or memory processing effects in the course of deductive reasoning. Participants undertook reasoning tasks based on visually presented arguments which were either (a) valid (Aristotelian) statements or (b) paradoxes. We compared brain activation patterns while participants maintained the premises / conclusions of either the valid statements or the paradoxes in working memory (WM). Event-related brain potentials (ERPs), specifically the P300 component of ERPs, were recorded during the WM phase, during which participants were required to draw a logical conclusion regarding the correctness of the valid syllogisms or the paradoxes. During the processing of paradoxes, results demonstrated a more positive event-related potential deflection (P300) across frontal regions, whereas processing of valid statements was associated with noticeable P300 amplitudes across parieto-occipital regions. These findings suggest that paradoxes mobilize frontal attention mechanisms, while valid deduction promotes parieto-occipital activity associated with attention and/or subsequent memory processing.
NASA Astrophysics Data System (ADS)
Adams, L. M.; LeVeque, R. J.
2015-12-01
The ability to measure, predict, and compute tsunami flow velocities is ofimportance in risk assessment and hazard mitigation. Until recently, fewdirect measurements of tsunami velocities existed to compare with modelresults. During the 11 March 2001 Tohoku Tsunami, 328 current meters werewere in place around the Hawaiian Islands, USA, that captured time seriesof water velocity in 18 locations, in both harbors and deep channels, ata series of depths. Arcos and LeVeque[1] compared these records againstnumerical simulations performed using the GeoClaw numerical tsunami modelwhich is based on the depth-averaged shallow water equations. They confirmedthat GeoClaw can accurately predict velocities at nearshore locations, andthat tsunami current velocity is more spatially variable than wave formor height and potentially more sensitive for model validation.We present a new approach to detiding this sensitive current data. Thisapproach can be used separately on data at each depth of a current gauge.When averaged across depths, the Geoclaw results in [1] are validated. Withoutaveraging, the results should be useful to researchers wishing to validate their3D codes. These results can be downloaded from the project website below.The approach decomposes the pre-tsunami component of the data into three parts:a tidal component, a fast component (noise), and a slow component (not matchedby the harmonic analysis). Each part is extended to the time when the tsunamiis present and subtracted from the current data then to give the ''tsunami current''that can be compared with 2D or 3D codes that do not model currents in thepre-tsunami regime. [1] "Validating Velocities in the GeoClaw Tsunami Model using Observations NearHawaii from the 2001 Tohoku Tsunami"M.E.M. Arcos and Randall J. LeVequearXiv:1410.2884v1 [physics.geo-py], 10 Oct. 2014.project website: http://faculty.washington.edu/lma3/research.html
Poveda, Verónica; Amado, Leonilde; Filgueiras, Madalena; Teixeira, Laetitia; Miranda, Vasco; Santos-Silva, Alice; Paúl, Constança; Costa, Elísio
2016-11-01
Non-adherence to medical plans is recognized as an important problem in dialysis patients, since it has been associated with increased morbidity and mortality, resulting in disproportionately high costs of care. The success of renal replacement therapy depends on the adherence of patients to the different aspects of the therapeutic strategy, which includes a complex drug regimen involving a wide variety of drugs and doses, several prescribed dialysis sessions with different durations, dietetic recommendations and restriction of fluid intake. In this work, we aimed to translate and validate a previously described self-reported end-stage renal disease questionnaire (ESRD-AQ) to the Portuguese language (PESRD-AQ). After ESRD-AQ translation, a validation was performed by experts and by using a cohort of 185 Portuguese dialysis patients. PESRD-AQ reliability analysis showed strong test-retest stability across all items, with an intra-class correlation of 0.931. The average of the item-level content validity index by experts for the 46 items was 0.98, ranging from 0.94 to 1. Moreover, we found that PESRD-AQ scores indicative of non-adherence were associated with alterations in some biological and biochemical markers of non-adherence, including interdialytic weight gain. In conclusion, our results showed that PESRD-AQ, which presented an acceptable reliability and validity, is a valid tool to be used for adherence evaluation by Portuguese-speaking dialysis patients.
Promoting the Quality of Health Research-based News: Introduction of a Tool
Ashoorkhani, Mahnaz; Majdzadeh, Reza; Nedjat, Saharnaz; Gholami, Jaleh
2017-01-01
Introduction: While disseminating health research findings to the public, it is very important to present appropriate and accurate information to give the target audience a correct understanding of the subject matter. The objective of this study was to design and psychometrically evaluate a checklist for health journalists to help them prepare news of appropriate accuracy and authenticity. Methods: The study consisted of two phases, checklist design and psychometrics. Literature review and expert opinion were used to extract the items of the checklist in the first phase. In the second phase, to assess content and face validity, the judgment of 38 persons (epidemiologists with a tool production history, editors-in-chief, and health journalists) was used to check the items’ understandability, nonambiguity, relevancy, and clarity. Reliability was assessed by the test–retest method using intra-cluster correlation (ICC) indices in the two phases. Cronbach's alpha was used to assess internal validity of the checklist. Results: Based on the participants’ opinions, the items were reduced from 20 to 14 in number. The items were categorized into the following three domains: (a) items assessing the source of news and its validity, (b) items addressing the presentation of complete and accurate information on research findings, and (c) items which if adhered to lead to the target audiences’ better understanding. The checklist was approved for content and face validity. The reliability of the checklist was assessed in the last stage; the ICC was 1 for 12 items and above 0.8 for the other two. Internal consistency (Cronbach's alpha) was 0.98. Discussion and Conclusions: The resultant indices of the study indicate that the checklist has appropriate validity and reliability. Hence, it can be used by health journalists to develop health research-based news. PMID:29184638
Seidenberg, Ruth; Schuh, Sabine K.; Exadaktylos, Aristomenis K.; Schechter, Clyde B.; Leichtle, Alexander B.; Hautz, Wolf E.
2018-01-01
Objective Patients presenting with suspected urinary tract infection are common in every day emergency practice. Urine flow cytometry has replaced microscopic urine evaluation in many emergency departments, but interpretation of the results remains challenging. The aim of this study was to develop and validate tools that predict urine culture growth out of urine flow cytometry parameter. Methods This retrospective study included all adult patients that presented in a large emergency department between January and July 2017 with a suspected urinary tract infection and had a urine flow cytometry as well as a urine culture obtained. The objective was to identify urine flow cytometry parameters that reliably predict urine culture growth and mixed flora growth. The data set was split into a training (70%) and a validation set (30%) and different decision-making approaches were developed and validated. Results Relevant urine culture growth (respectively mixed flora growth) was found in 40.2% (7.2% respectively) of the 613 patients included. The number of leukocytes and bacteria in flow cytometry were highly associated with urine culture growth, but mixed flora growth could not be sufficiently predicted from the urine flow cytometry parameters. A decision tree, predictive value figures, a nomogram, and a cut-off table to predict urine culture growth from bacteria and leukocyte count were developed, validated and compared. Conclusions Urine flow cytometry parameters are insufficient to predict mixed flora growth. However, the prediction of urine culture growth based on bacteria and leukocyte count is highly accurate and the developed tools should be used as part of the decision-making process of ordering a urine culture or starting an antibiotic therapy if a urogenital infection is suspected. PMID:29474463
Dynamic measurement of speed of sound in n-Heptane by ultrasonics during fuel injections.
Minnetti, Elisa; Pandarese, Giuseppe; Evangelisti, Piersavio; Verdugo, Francisco Rodriguez; Ungaro, Carmine; Bastari, Alessandro; Paone, Nicola
2017-11-01
The paper presents a technique to measure the speed of sound in fuels based on pulse-echo ultrasound. The method is applied inside the test chamber of a Zeuch-type instrument used for indirect measurement of the injection rate (Mexus). The paper outlines the pulse-echo method, considering probe installation, ultrasound beam propagation inside the test chamber, typical signals obtained, as well as different processing algorithms. The method is validated in static conditions by comparing the experimental results to the NIST database both for water and n-Heptane. The ultrasonic system is synchronized to the injector so that time resolved samples of speed of sound can be successfully acquired during a series of injections. Results at different operating conditions in n-Heptane are shown. An uncertainty analysis supports the analysis of results and allows to validate the method. Experimental results show that the speed of sound variation during an injection event is less than 1%, so the Mexus model assumption to consider it constant during the injection is valid. Copyright © 2017 Elsevier B.V. All rights reserved.
Numerical Analysis of a Pulse Detonation Cross Flow Heat Load Experiment
NASA Technical Reports Server (NTRS)
Paxson, Daniel E.; Naples, Andrew .; Hoke, John L.; Schauer, Fred
2011-01-01
A comparison between experimentally measured and numerically simulated, time-averaged, point heat transfer rates in a pulse detonation (PDE) engine is presented. The comparison includes measurements and calculations for heat transfer to a cylinder in crossflow and to the tube wall itself using a novel spool design. Measurements are obtained at several locations and under several operating conditions. The measured and computed results are shown to be in substantial agreement, thereby validating the modeling approach. The model, which is based in computational fluid dynamics (CFD) is then used to interpret the results. A preheating of the incoming fuel charge is predicted, which results in increased volumetric flow and subsequent overfilling. The effect is validated with additional measurements.
Adaptive finite element methods for two-dimensional problems in computational fracture mechanics
NASA Technical Reports Server (NTRS)
Min, J. B.; Bass, J. M.; Spradley, L. W.
1994-01-01
Some recent results obtained using solution-adaptive finite element methods in two-dimensional problems in linear elastic fracture mechanics are presented. The focus is on the basic issue of adaptive finite element methods for validating the new methodology by computing demonstration problems and comparing the stress intensity factors to analytical results.
Validation and Verification of Composite Pressure Vessel Design
NASA Technical Reports Server (NTRS)
Kreger, Stephen T.; Ortyl, Nicholas; Grant, Joseph; Taylor, F. Tad
2006-01-01
Ten composite pressure vessels were instrumented with fiber Bragg grating sensors and pressure tested Through burst. This paper and presentation will discuss the testing methodology, the test results, compare the testing results to the analytical model, and also compare the fiber Bragg grating sensor data with data obtained against that obtained from foil strain gages.
NASA Astrophysics Data System (ADS)
Jandt, Simon; Laagemaa, Priidik; Janssen, Frank
2014-05-01
The systematic and objective comparison between output from a numerical ocean model and a set of observations, called validation in the context of this presentation, is a beneficial activity at several stages, starting from early steps in model development and ending at the quality control of model based products delivered to customers. Even though the importance of this kind of validation work is widely acknowledged it is often not among the most popular tasks in ocean modelling. In order to ease the validation work a comprehensive toolbox has been developed in the framework of the MyOcean-2 project. The objective of this toolbox is to carry out validation integrating different data sources, e.g. time-series at stations, vertical profiles, surface fields or along track satellite data, with one single program call. The validation toolbox, implemented in MATLAB, features all parts of the validation process - ranging from read-in procedures of datasets to the graphical and numerical output of statistical metrics of the comparison. The basic idea is to have only one well-defined validation schedule for all applications, in which all parts of the validation process are executed. Each part, e.g. read-in procedures, forms a module in which all available functions of this particular part are collected. The interface between the functions, the module and the validation schedule is highly standardized. Functions of a module are set up for certain validation tasks, new functions can be implemented into the appropriate module without affecting the functionality of the toolbox. The functions are assigned for each validation task in user specific settings, which are externally stored in so-called namelists and gather all information of the used datasets as well as paths and metadata. In the framework of the MyOcean-2 project the toolbox is frequently used to validate the forecast products of the Baltic Sea Marine Forecasting Centre. Hereby the performance of any new product version is compared with the previous version. Although, the toolbox is mainly tested for the Baltic Sea yet, it can easily be adapted to different datasets and parameters, regardless of the geographic region. In this presentation the usability of the toolbox is demonstrated along with several results of the validation process.
Harrison, Peter M C; Collins, Tom; Müllensiefen, Daniel
2017-06-15
Modern psychometric theory provides many useful tools for ability testing, such as item response theory, computerised adaptive testing, and automatic item generation. However, these techniques have yet to be integrated into mainstream psychological practice. This is unfortunate, because modern psychometric techniques can bring many benefits, including sophisticated reliability measures, improved construct validity, avoidance of exposure effects, and improved efficiency. In the present research we therefore use these techniques to develop a new test of a well-studied psychological capacity: melodic discrimination, the ability to detect differences between melodies. We calibrate and validate this test in a series of studies. Studies 1 and 2 respectively calibrate and validate an initial test version, while Studies 3 and 4 calibrate and validate an updated test version incorporating additional easy items. The results support the new test's viability, with evidence for strong reliability and construct validity. We discuss how these modern psychometric techniques may also be profitably applied to other areas of music psychology and psychological science in general.
Wygant, Dustin B; Sellbom, Martin; Gervais, Roger O; Ben-Porath, Yossef S; Stafford, Kathleen P; Freeman, David B; Heilbronner, Robert L
2010-12-01
The present study extends the validation of the Minnesota Multiphasic Personality Inventory-2 (MMPI-2) and the Minnesota Multiphasic Personality Inventory-2 Restructured Form (MMPI-2-RF) Response Bias Scale (RBS; R. O. Gervais, Y. S. Ben-Porath, D. B. Wygant, & P. Green, 2007) in separate forensic samples composed of disability claimants and criminal defendants. Using cognitive symptom validity tests as response bias indicators, the RBS exhibited large effect sizes (Cohen's ds = 1.24 and 1.48) in detecting cognitive response bias in the disability and criminal forensic samples, respectively. The scale also added incremental prediction to the traditional MMPI-2 and the MMPI-2-RF overreporting validity scales in the disability sample and exhibited excellent specificity with acceptable sensitivity at cutoffs ranging from 90T to 120T. The results of this study indicate that the RBS can add uniquely to the existing MMPI-2 and MMPI-2-RF validity scales in detecting symptom exaggeration associated with cognitive response bias.
Global precipitation measurements for validating climate models
NASA Astrophysics Data System (ADS)
Tapiador, F. J.; Navarro, A.; Levizzani, V.; García-Ortega, E.; Huffman, G. J.; Kidd, C.; Kucera, P. A.; Kummerow, C. D.; Masunaga, H.; Petersen, W. A.; Roca, R.; Sánchez, J.-L.; Tao, W.-K.; Turk, F. J.
2017-11-01
The advent of global precipitation data sets with increasing temporal span has made it possible to use them for validating climate models. In order to fulfill the requirement of global coverage, existing products integrate satellite-derived retrievals from many sensors with direct ground observations (gauges, disdrometers, radars), which are used as reference for the satellites. While the resulting product can be deemed as the best-available source of quality validation data, awareness of the limitations of such data sets is important to avoid extracting wrong or unsubstantiated conclusions when assessing climate model abilities. This paper provides guidance on the use of precipitation data sets for climate research, including model validation and verification for improving physical parameterizations. The strengths and limitations of the data sets for climate modeling applications are presented, and a protocol for quality assurance of both observational databases and models is discussed. The paper helps elaborating the recent IPCC AR5 acknowledgment of large observational uncertainties in precipitation observations for climate model validation.
[French scale validation of the Infant Behavior Questionnaire three months after birth].
Lacombe, Marie; Delmas, Philippe; Carrier, Nathalie; Rabillon, Florence; Couture, Marie-Estelle
2015-06-01
Breastfeeding is recognize to be the perfect food of mother and child's health. The child's temperament is one of the factors that may explain pursuing the breastfeeding. Few instruments are available in French to measure this factor. The objective of the study is to present and validate the French translation of the scale "Infant Behavior Questionnaire" (IBQ). The sample consists of 193 primaparous or multiparous women who gave birth in a maternity in Paris. The child's temperament questionnaire was sent by mail three months after the birth. The same questionnaire was sent to a sub-sample of 30 women 15 days later. Analyses were conducted to assess the temporal stability, internal consistency, construct validity and predictive. The different results tend to show a compliant validity to the french scale version. This first IBQ French-language validation is worth pursuing in order to confirm the scale factor structure and participate to studies supporting mothers in their breastfeeding project.
Achard de Leluardière, F; Hajri, L N; Lacouture, P; Duboy, J; Frelut, M L; Peres, G
2006-02-01
There may be concerns about the validity of kinetic models when studying locomotion in obese subjects (OS). The aim of the present study was to improve and validate a relevant representation of obese subject from four kinetic models. Fourteen teenagers with severe primary obesity (BMI = 40 +/- 5.2 kg/m(2)), were studied during jumping. The jumps were filmed by six cameras (synchronized, 50 Hz), associated with a force-plate (1,000 Hz). All the tested models were valid; the linear mechanical analysis of the jumps gave similar results (p > 0.05); but there were significantly different segment inertias when considering the subjects' abdomen (p < 0.01), which was associated with a significantly higher mechanical internal energy expenditure (p < 0.01) than that estimated from Dempster's and Hanavan's model, by about 40 and 30%. The validation of a modelling specifically for obese subjects will enable a better understanding of their locomotion.
Development and Validation of Triarchic Construct Scales from the Psychopathic Personality Inventory
Hall, Jason R.; Drislane, Laura E.; Patrick, Christopher J.; Morano, Mario; Lilienfeld, Scott O.; Poythress, Norman G.
2014-01-01
The Triarchic model of psychopathy describes this complex condition in terms of distinct phenotypic components of boldness, meanness, and disinhibition. Brief self-report scales designed specifically to index these psychopathy facets have thus far demonstrated promising construct validity. The present study sought to develop and validate scales for assessing facets of the Triarchic model using items from a well-validated existing measure of psychopathy—the Psychopathic Personality Inventory (PPI). A consensus rating approach was used to identify PPI items relevant to each Triarchic facet, and the convergent and discriminant validity of the resulting PPI-based Triarchic scales were evaluated in relation to multiple criterion variables (i.e., other psychopathy inventories, antisocial personality disorder features, personality traits, psychosocial functioning) in offender and non-offender samples. The PPI-based Triarchic scales showed good internal consistency and related to criterion variables in ways consistent with predictions based on the Triarchic model. Findings are discussed in terms of implications for conceptualization and assessment of psychopathy. PMID:24447280
Hall, Jason R; Drislane, Laura E; Patrick, Christopher J; Morano, Mario; Lilienfeld, Scott O; Poythress, Norman G
2014-06-01
The Triarchic model of psychopathy describes this complex condition in terms of distinct phenotypic components of boldness, meanness, and disinhibition. Brief self-report scales designed specifically to index these psychopathy facets have thus far demonstrated promising construct validity. The present study sought to develop and validate scales for assessing facets of the Triarchic model using items from a well-validated existing measure of psychopathy-the Psychopathic Personality Inventory (PPI). A consensus-rating approach was used to identify PPI items relevant to each Triarchic facet, and the convergent and discriminant validity of the resulting PPI-based Triarchic scales were evaluated in relation to multiple criterion variables (i.e., other psychopathy inventories, antisocial personality disorder features, personality traits, psychosocial functioning) in offender and nonoffender samples. The PPI-based Triarchic scales showed good internal consistency and related to criterion variables in ways consistent with predictions based on the Triarchic model. Findings are discussed in terms of implications for conceptualization and assessment of psychopathy.
Blum, Sarah; Debener, Stefan; Emkes, Reiner; Volkening, Nils; Fudickar, Sebastian; Bleichner, Martin G
2017-01-01
Our aim was the development and validation of a modular signal processing and classification application enabling online electroencephalography (EEG) signal processing on off-the-shelf mobile Android devices. The software application SCALA (Signal ProCessing and CLassification on Android) supports a standardized communication interface to exchange information with external software and hardware. In order to implement a closed-loop brain-computer interface (BCI) on the smartphone, we used a multiapp framework, which integrates applications for stimulus presentation, data acquisition, data processing, classification, and delivery of feedback to the user. We have implemented the open source signal processing application SCALA. We present timing test results supporting sufficient temporal precision of audio events. We also validate SCALA with a well-established auditory selective attention paradigm and report above chance level classification results for all participants. Regarding the 24-channel EEG signal quality, evaluation results confirm typical sound onset auditory evoked potentials as well as cognitive event-related potentials that differentiate between correct and incorrect task performance feedback. We present a fully smartphone-operated, modular closed-loop BCI system that can be combined with different EEG amplifiers and can easily implement other paradigms.
The Hyper-X Flight Systems Validation Program
NASA Technical Reports Server (NTRS)
Redifer, Matthew; Lin, Yohan; Bessent, Courtney Amos; Barklow, Carole
2007-01-01
For the Hyper-X/X-43A program, the development of a comprehensive validation test plan played an integral part in the success of the mission. The goal was to demonstrate hypersonic propulsion technologies by flight testing an airframe-integrated scramjet engine. Preparation for flight involved both verification and validation testing. By definition, verification is the process of assuring that the product meets design requirements; whereas validation is the process of assuring that the design meets mission requirements for the intended environment. This report presents an overview of the program with emphasis on the validation efforts. It includes topics such as hardware-in-the-loop, failure modes and effects, aircraft-in-the-loop, plugs-out, power characterization, antenna pattern, integration, combined systems, captive carry, and flight testing. Where applicable, test results are also discussed. The report provides a brief description of the flight systems onboard the X-43A research vehicle and an introduction to the ground support equipment required to execute the validation plan. The intent is to provide validation concepts that are applicable to current, follow-on, and next generation vehicles that share the hybrid spacecraft and aircraft characteristics of the Hyper-X vehicle.
Validation of a short Korean version of the UPPS-P Impulsive Behavior Scale.
Lim, Sun Young; Kim, Seog Ju
2018-04-23
The purpose of the present study was to validate a Korean version of the short UPPS-P Impulsive Behavior Scale (UPPS-P). This study included 724 undergraduate students who completed the following questionnaires: the Korean UPPS-P, Beck Depression Inventory, State-Trait Anxiety Inventory, Eating Disorder Inventory-2, Alcohol Use Disorder Identification Test, and Canadian Problem Gambling Index. A confirmatory factor analysis supported a 5-factor interrelated model. The internal consistency coefficients for the 5 factors of the short Korean UPPS-P were acceptable (.65-.78 across the subscales), and the subscales of the short Korean UPPS-P were strongly correlated with the long UPPS-P subscales. External validity was demonstrated by associations between the subfactors of impulsivity and various psychopathologies, including depression, anxiety, binge eating, alcohol abuse, and gambling. The present results indicate that the short Korean version of the UPPS-P may be a useful and reliable alternative to the original long-form UPPS-P. © 2018 John Wiley & Sons Australia, Ltd.
Carrera-Fernández, María Victoria; Lameiras-Fernández, María; Rodríguez-Castro, Yolanda; Vallejo-Medina, Pablo
2014-01-01
The aim of the present study was to develop and validate a short form of the Genderism and Transphobia Scale and assess adolescents' attitudes toward transpeople. A total of 800 Spanish adolescents aged between 14 and 18 years (50.70% girls, 49.30% boys) completed the Spanish version of the scale and other related questionnaires. The short form of the scale is composed of 12 items clustered into two factors (Transphobia/Genderism and Gender Bashing) that explain 54.22% of the variance. All the items showed good discriminating power, and the present scale demonstrated adequate reliability and validity. In the study, boys exhibited significantly more negative attitudes toward transpeople than girls did, both in the affective/cognitive dimension (Transphobia/Genderism) and in the behavioral dimension (Gender Bashing). Moreover, adolescents showed significantly more negative attitudes toward gender-nonconforming men than toward gender-nonconforming women. These results are discussed in terms of their relevance to the maintenance of discriminatory attitudes toward sexual diversity.
Fujimura, Tomomi; Umemura, Hiroyuki
2018-01-15
The present study describes the development and validation of a facial expression database comprising five different horizontal face angles in dynamic and static presentations. The database includes twelve expression types portrayed by eight Japanese models. This database was inspired by the dimensional and categorical model of emotions: surprise, fear, sadness, anger with open mouth, anger with closed mouth, disgust with open mouth, disgust with closed mouth, excitement, happiness, relaxation, sleepiness, and neutral (static only). The expressions were validated using emotion classification and Affect Grid rating tasks [Russell, Weiss, & Mendelsohn, 1989. Affect Grid: A single-item scale of pleasure and arousal. Journal of Personality and Social Psychology, 57(3), 493-502]. The results indicate that most of the expressions were recognised as the intended emotions and could systematically represent affective valence and arousal. Furthermore, face angle and facial motion information influenced emotion classification and valence and arousal ratings. Our database will be available online at the following URL. https://www.dh.aist.go.jp/database/face2017/ .
NASA Astrophysics Data System (ADS)
Berthold, T.; Milbradt, P.; Berkhahn, V.
2018-04-01
This paper presents a model for the approximation of multiple, spatially distributed grain size distributions based on a feedforward neural network. Since a classical feedforward network does not guarantee to produce valid cumulative distribution functions, a priori information is incor porated into the model by applying weight and architecture constraints. The model is derived in two steps. First, a model is presented that is able to produce a valid distribution function for a single sediment sample. Although initially developed for sediment samples, the model is not limited in its application; it can also be used to approximate any other multimodal continuous distribution function. In the second part, the network is extended in order to capture the spatial variation of the sediment samples that have been obtained from 48 locations in the investigation area. Results show that the model provides an adequate approximation of grain size distributions, satisfying the requirements of a cumulative distribution function.
Reliability and Validity of the Korean Cancer Pain Assessment Tool (KCPAT)
Kim, Jeong A; Lee, Juneyoung; Park, Jeanno; Lee, Myung Ah; Yeom, Chang Hwan; Jang, Se Kwon; Yoon, Duck Mi; Kim, Jun Suk
2005-01-01
The Korean Cancer Pain Assessment Tool (KCPAT), which was developed in 2003, consists of questions concerning the location of pain, the nature of pain, the present pain intensity, the symptoms associated with the pain, and psychosocial/spiritual pain assessments. This study was carried out to evaluate the reliability and validity of the KCPAT. A stratified, proportional-quota, clustered, systematic sampling procedure was used. The study population (903 cancer patients) was 1% of the target population (90,252 cancer patients). A total of 314 (34.8%) questionnaires were collected. The results showed that the average pain score (5 point on Likert scale) according to the cancer type and the at-present average pain score (VAS, 0-10) were correlated (r=0.56, p<0.0001), and showed moderate agreement (kappa=0.364). The mean satisfaction score was 3.8 (1-5). The average time to complete the questionnaire was 8.9 min. In conclusion, the KCPAT is a reliable and valid instrument for assessing cancer pain in Koreans. PMID:16224166
Failure mode and effects analysis outputs: are they valid?
Shebl, Nada Atef; Franklin, Bryony Dean; Barber, Nick
2012-06-10
Failure Mode and Effects Analysis (FMEA) is a prospective risk assessment tool that has been widely used within the aerospace and automotive industries and has been utilised within healthcare since the early 1990s. The aim of this study was to explore the validity of FMEA outputs within a hospital setting in the United Kingdom. Two multidisciplinary teams each conducted an FMEA for the use of vancomycin and gentamicin. Four different validity tests were conducted: Face validity: by comparing the FMEA participants' mapped processes with observational work. Content validity: by presenting the FMEA findings to other healthcare professionals. Criterion validity: by comparing the FMEA findings with data reported on the trust's incident report database. Construct validity: by exploring the relevant mathematical theories involved in calculating the FMEA risk priority number. Face validity was positive as the researcher documented the same processes of care as mapped by the FMEA participants. However, other healthcare professionals identified potential failures missed by the FMEA teams. Furthermore, the FMEA groups failed to include failures related to omitted doses; yet these were the failures most commonly reported in the trust's incident database. Calculating the RPN by multiplying severity, probability and detectability scores was deemed invalid because it is based on calculations that breach the mathematical properties of the scales used. There are significant methodological challenges in validating FMEA. It is a useful tool to aid multidisciplinary groups in mapping and understanding a process of care; however, the results of our study cast doubt on its validity. FMEA teams are likely to need different sources of information, besides their personal experience and knowledge, to identify potential failures. As for FMEA's methodology for scoring failures, there were discrepancies between the teams' estimates and similar incidents reported on the trust's incident database. Furthermore, the concept of multiplying ordinal scales to prioritise failures is mathematically flawed. Until FMEA's validity is further explored, healthcare organisations should not solely depend on their FMEA results to prioritise patient safety issues.
Self Consistent Bathymetric Mapping From Robotic Vehicles in the Deep Ocean
2005-06-01
that have been aligned in a consistent manner. Experimental results from the fully automated processing of a multibeam survey over the TAG hydrothermal structure at the Mid-Atlantic ridge are presented to validate the proposed method.
ERIC Educational Resources Information Center
Jones, Joanna; Gaffney-Rhys, Ruth; Jones, Edward
2014-01-01
This article presents a synthesis of previous ideas relating to student evaluation of teaching (SET) results in higher education institutions (HEIs), with particular focus upon possible validity issues and matters that HEI decision-makers should consider prior to interpreting survey results and using them summatively. Furthermore, the research…
ERIC Educational Resources Information Center
National Assessment of Educational Progress, Ann Arbor, MI.
Presented are five reviews of the National Assessment of Educational Progress results in science. Dr. Mildred Ballou discusses the objectives of the assessment by age level with concern over explanations for responses, social implications, and validity of testing exercises. Wilmer Cooksey comments on the results as viewed by the classroom teacher…
Zheng, Kai; Fear, Kathleen; Chaffee, Bruce W; Zimmerman, Christopher R; Karls, Edward M; Gatwood, Justin D; Stevenson, James G; Pearlman, Mark D
2011-12-01
To develop a theoretically informed and empirically validated survey instrument for assessing prescribers' perception of computerized drug-drug interaction (DDI) alerts. The survey is grounded in the unified theory of acceptance and use of technology and an adapted accident causation model. Development of the instrument was also informed by a review of the extant literature on prescribers' attitude toward computerized medication safety alerts and common prescriber-provided reasons for overriding. To refine and validate the survey, we conducted a two-stage empirical validation study consisting of a pretest with a panel of domain experts followed by a field test among all eligible prescribers at our institution. The resulting survey instrument contains 28 questionnaire items assessing six theoretical dimensions: performance expectancy, effort expectancy, social influence, facilitating conditions, perceived fatigue, and perceived use behavior. Satisfactory results were obtained from the field validation; however, a few potential issues were also identified. We analyzed these issues accordingly and the results led to the final survey instrument as well as usage recommendations. High override rates of computerized medication safety alerts have been a prevalent problem. They are usually caused by, or manifested in, issues of poor end user acceptance. However, standardized research tools for assessing and understanding end users' perception are currently lacking, which inhibits knowledge accumulation and consequently forgoes improvement opportunities. The survey instrument presented in this paper may help fill this methodological gap. We developed and empirically validated a survey instrument that may be useful for future research on DDI alerts and other types of computerized medication safety alerts more generally.
Mahamdallie, Shazia; Ruark, Elise; Yost, Shawn; Ramsay, Emma; Uddin, Imran; Wylie, Harriett; Elliott, Anna; Strydom, Ann; Renwick, Anthony; Seal, Sheila; Rahman, Nazneen
2017-01-01
Detection of deletions and duplications of whole exons (exon CNVs) is a key requirement of genetic testing. Accurate detection of this variant type has proved very challenging in targeted next-generation sequencing (NGS) data, particularly if only a single exon is involved. Many different NGS exon CNV calling methods have been developed over the last five years. Such methods are usually evaluated using simulated and/or in-house data due to a lack of publicly-available datasets with orthogonally generated results. This hinders tool comparisons, transparency and reproducibility. To provide a community resource for assessment of exon CNV calling methods in targeted NGS data, we here present the ICR96 exon CNV validation series. The dataset includes high-quality sequencing data from a targeted NGS assay (the TruSight Cancer Panel) together with Multiplex Ligation-dependent Probe Amplification (MLPA) results for 96 independent samples. 66 samples contain at least one validated exon CNV and 30 samples have validated negative results for exon CNVs in 26 genes. The dataset includes 46 exon CNVs in BRCA1 , BRCA2 , TP53 , MLH1 , MSH2 , MSH6 , PMS2 , EPCAM or PTEN , giving excellent representation of the cancer predisposition genes most frequently tested in clinical practice. Moreover, the validated exon CNVs include 25 single exon CNVs, the most difficult type of exon CNV to detect. The FASTQ files for the ICR96 exon CNV validation series can be accessed through the European-Genome phenome Archive (EGA) under the accession number EGAS00001002428.
Mechanism reduction for multicomponent surrogates: A case study using toluene reference fuels
DOE Office of Scientific and Technical Information (OSTI.GOV)
Niemeyer, Kyle E.; Sung, Chih-Jen
Strategies and recommendations for performing skeletal reductions of multicomponent surrogate fuels are presented, through the generation and validation of skeletal mechanisms for a three-component toluene reference fuel. Using the directed relation graph with error propagation and sensitivity analysis method followed by a further unimportant reaction elimination stage, skeletal mechanisms valid over comprehensive and high-temperature ranges of conditions were developed at varying levels of detail. These skeletal mechanisms were generated based on autoignition simulations, and validation using ignition delay predictions showed good agreement with the detailed mechanism in the target range of conditions. When validated using phenomena other than autoignition, suchmore » as perfectly stirred reactor and laminar flame propagation, tight error control or more restrictions on the reduction during the sensitivity analysis stage were needed to ensure good agreement. In addition, tight error limits were needed for close prediction of ignition delay when varying the mixture composition away from that used for the reduction. In homogeneous compression-ignition engine simulations, the skeletal mechanisms closely matched the point of ignition and accurately predicted species profiles for lean to stoichiometric conditions. Furthermore, the efficacy of generating a multicomponent skeletal mechanism was compared to combining skeletal mechanisms produced separately for neat fuel components; using the same error limits, the latter resulted in a larger skeletal mechanism size that also lacked important cross reactions between fuel components. Based on the present results, general guidelines for reducing detailed mechanisms for multicomponent fuels are discussed.« less
Park, Yu Rang; Yoon, Young Jo; Jang, Tae Hun; Seo, Hwa Jeong
2014-01-01
Objectives Extension of the standard model while retaining compliance with it is a challenging issue because there is currently no method for semantically or syntactically verifying an extended data model. A metadata-based extended model, named CCR+, was designed and implemented to achieve interoperability between standard and extended models. Methods Furthermore, a multilayered validation method was devised to validate the standard and extended models. The American Society for Testing and Materials (ASTM) Community Care Record (CCR) standard was selected to evaluate the CCR+ model; two CCR and one CCR+ XML files were evaluated. Results In total, 188 metadata were extracted from the ASTM CCR standard; these metadata are semantically interconnected and registered in the metadata registry. An extended-data-model-specific validation file was generated from these metadata. This file can be used in a smartphone application (Health Avatar CCR+) as a part of a multilayered validation. The new CCR+ model was successfully evaluated via a patient-centric exchange scenario involving multiple hospitals, with the results supporting both syntactic and semantic interoperability between the standard CCR and extended, CCR+, model. Conclusions A feasible method for delivering an extended model that complies with the standard model is presented herein. There is a great need to extend static standard models such as the ASTM CCR in various domains: the methods presented here represent an important reference for achieving interoperability between standard and extended models. PMID:24627817
Active Aeroelastic Wing Aerodynamic Model Development and Validation for a Modified F/A-18A Airplane
NASA Technical Reports Server (NTRS)
Cumming, Stephen B.; Diebler, Corey G.
2005-01-01
A new aerodynamic model has been developed and validated for a modified F/A-18A airplane used for the Active Aeroelastic Wing (AAW) research program. The goal of the program was to demonstrate the advantages of using the inherent flexibility of an aircraft to enhance its performance. The research airplane was an F/A-18A with wings modified to reduce stiffness and a new control system to increase control authority. There have been two flight phases. Data gathered from the first flight phase were used to create the new aerodynamic model. A maximum-likelihood output-error parameter estimation technique was used to obtain stability and control derivatives. The derivatives were incorporated into the National Aeronautics and Space Administration F-18 simulation, validated, and used to develop new AAW control laws. The second phase of flights was used to evaluate the handling qualities of the AAW airplane and the control law design process, and to further test the accuracy of the new model. The flight test envelope covered Mach numbers between 0.85 and 1.30 and dynamic pressures from 600 to 1250 pound-force per square foot. The results presented in this report demonstrate that a thorough parameter identification analysis can be used to improve upon models that were developed using other means. This report describes the parameter estimation technique used, details the validation techniques, discusses differences between previously existing F/A-18 models, and presents results from the second phase of research flights.
Mechanism reduction for multicomponent surrogates: A case study using toluene reference fuels
Niemeyer, Kyle E.; Sung, Chih-Jen
2014-11-01
Strategies and recommendations for performing skeletal reductions of multicomponent surrogate fuels are presented, through the generation and validation of skeletal mechanisms for a three-component toluene reference fuel. Using the directed relation graph with error propagation and sensitivity analysis method followed by a further unimportant reaction elimination stage, skeletal mechanisms valid over comprehensive and high-temperature ranges of conditions were developed at varying levels of detail. These skeletal mechanisms were generated based on autoignition simulations, and validation using ignition delay predictions showed good agreement with the detailed mechanism in the target range of conditions. When validated using phenomena other than autoignition, suchmore » as perfectly stirred reactor and laminar flame propagation, tight error control or more restrictions on the reduction during the sensitivity analysis stage were needed to ensure good agreement. In addition, tight error limits were needed for close prediction of ignition delay when varying the mixture composition away from that used for the reduction. In homogeneous compression-ignition engine simulations, the skeletal mechanisms closely matched the point of ignition and accurately predicted species profiles for lean to stoichiometric conditions. Furthermore, the efficacy of generating a multicomponent skeletal mechanism was compared to combining skeletal mechanisms produced separately for neat fuel components; using the same error limits, the latter resulted in a larger skeletal mechanism size that also lacked important cross reactions between fuel components. Based on the present results, general guidelines for reducing detailed mechanisms for multicomponent fuels are discussed.« less
THE PICNIC GAME: PRESENTATION OF A SITUATION OF OBSERVATION TO ASSESS FAMILY INTERACTIONS.
Favez, Nicolas; Frascarolo, France; Grimard, Nathalie
2016-05-01
The aim of this article is to present a situation of observation designed for the assessment of family interactions: The PicNic Game (PNG). In this situation, families are invited to play at having a picnic together. This can be done with any number of children, aged from a few weeks to adolescence. A companion assessment tool, the Revised-Picnic Assessment Scale (Re-PAS), allows evaluation of interactions in the family on several dimensions. This article presents the PNG and a preliminary study of the validation of the Re-PAS dimensions in a sample of families (N = 67) with 18-month-old infants and their siblings. The PNG was well-received by the families. Construct validity of the Re-PAS was tested, first against self-reported data by mothers and fathers regarding marital satisfaction, coparenting behavior, and division of household tasks, and then against observed maternal and paternal sensitivity and controlling behaviors assessed during free-play. Results show satisfactory preliminary reliability and validity. Two contrasting cases are presented to illustrate the different interactions highlighted in the PNG. This situation is useful for researchers and clinicians, particularly as a basis for video-feedback work with the family. © 2016 Michigan Association for Infant Mental Health.
Predicting ionizing radiation exposure using biochemically-inspired genomic machine learning.
Zhao, Jonathan Z L; Mucaki, Eliseos J; Rogan, Peter K
2018-01-01
Background: Gene signatures derived from transcriptomic data using machine learning methods have shown promise for biodosimetry testing. These signatures may not be sufficiently robust for large scale testing, as their performance has not been adequately validated on external, independent datasets. The present study develops human and murine signatures with biochemically-inspired machine learning that are strictly validated using k-fold and traditional approaches. Methods: Gene Expression Omnibus (GEO) datasets of exposed human and murine lymphocytes were preprocessed via nearest neighbor imputation and expression of genes implicated in the literature to be responsive to radiation exposure (n=998) were then ranked by Minimum Redundancy Maximum Relevance (mRMR). Optimal signatures were derived by backward, complete, and forward sequential feature selection using Support Vector Machines (SVM), and validated using k-fold or traditional validation on independent datasets. Results: The best human signatures we derived exhibit k-fold validation accuracies of up to 98% ( DDB2 , PRKDC , TPP2 , PTPRE , and GADD45A ) when validated over 209 samples and traditional validation accuracies of up to 92% ( DDB2 , CD8A , TALDO1 , PCNA , EIF4G2 , LCN2 , CDKN1A , PRKCH , ENO1 , and PPM1D ) when validated over 85 samples. Some human signatures are specific enough to differentiate between chemotherapy and radiotherapy. Certain multi-class murine signatures have sufficient granularity in dose estimation to inform eligibility for cytokine therapy (assuming these signatures could be translated to humans). We compiled a list of the most frequently appearing genes in the top 20 human and mouse signatures. More frequently appearing genes among an ensemble of signatures may indicate greater impact of these genes on the performance of individual signatures. Several genes in the signatures we derived are present in previously proposed signatures. Conclusions: Gene signatures for ionizing radiation exposure derived by machine learning have low error rates in externally validated, independent datasets, and exhibit high specificity and granularity for dose estimation.
Mayorga-Vega, Daniel; Bocanegra-Parrilla, Raúl; Ornelas, Martha; Viciana, Jesús
2016-01-01
Objectives The main purpose of the present meta-analysis was to examine the criterion-related validity of the distance- and time-based walk/run tests for estimating cardiorespiratory fitness among apparently healthy children and adults. Materials and Methods Relevant studies were searched from seven electronic bibliographic databases up to August 2015 and through other sources. The Hunter-Schmidt’s psychometric meta-analysis approach was conducted to estimate the population criterion-related validity of the following walk/run tests: 5,000 m, 3 miles, 2 miles, 3,000 m, 1.5 miles, 1 mile, 1,000 m, ½ mile, 600 m, 600 yd, ¼ mile, 15 min, 12 min, 9 min, and 6 min. Results From the 123 included studies, a total of 200 correlation values were analyzed. The overall results showed that the criterion-related validity of the walk/run tests for estimating maximum oxygen uptake ranged from low to moderate (rp = 0.42–0.79), with the 1.5 mile (rp = 0.79, 0.73–0.85) and 12 min walk/run tests (rp = 0.78, 0.72–0.83) having the higher criterion-related validity for distance- and time-based field tests, respectively. The present meta-analysis also showed that sex, age and maximum oxygen uptake level do not seem to affect the criterion-related validity of the walk/run tests. Conclusions When the evaluation of an individual’s maximum oxygen uptake attained during a laboratory test is not feasible, the 1.5 mile and 12 min walk/run tests represent useful alternatives for estimating cardiorespiratory fitness. As in the assessment with any physical fitness field test, evaluators must be aware that the performance score of the walk/run field tests is simply an estimation and not a direct measure of cardiorespiratory fitness. PMID:26987118
Transonic Flow Past Cone Cylinders
NASA Technical Reports Server (NTRS)
Solomon, George E
1955-01-01
Experimental results are presented for transonic flow post cone-cylinder, axially symmetric bodies. The drag coefficient and surface Mach number are studied as the free-stream Mach number is varied and, wherever possible, the experimental results are compared with theoretical predictions. Interferometric results for several typical flow configurations are shown and an example of shock-free supersonic-to-subsonic compression is experimentally demonstrated. The theoretical problem of transonic flow past finite cones is discussed briefly and an approximate solution of the axially symmetric transonic equations, valid for a semi-infinite cone, is presented.
Study on Predicting Axial Load Capacity of CFST Columns
NASA Astrophysics Data System (ADS)
Ravi Kumar, H.; Muthu, K. U.; Kumar, N. S.
2017-11-01
This work presents an analytical study and experimental study on the behaviour and ultimate load carrying capacity of axially compressed self-compacting concrete-filled steel tubular columns. Results of tests conducted by various researchers on 213 samples concrete-filled steel tubular columns are reported and present authors experimental data are reported. Two theoretical equations were derived for the prediction of the ultimate axial load strength of concrete-filled steel tubular columns. The results from prediction were compared with the experimental data. Validation to the experimental results was made.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ahmed E. Hassan
2006-01-24
Models have an inherent uncertainty. The difficulty in fully characterizing the subsurface environment makes uncertainty an integral component of groundwater flow and transport models, which dictates the need for continuous monitoring and improvement. Building and sustaining confidence in closure decisions and monitoring networks based on models of subsurface conditions require developing confidence in the models through an iterative process. The definition of model validation is postulated as a confidence building and long-term iterative process (Hassan, 2004a). Model validation should be viewed as a process not an end result. Following Hassan (2004b), an approach is proposed for the validation process ofmore » stochastic groundwater models. The approach is briefly summarized herein and detailed analyses of acceptance criteria for stochastic realizations and of using validation data to reduce input parameter uncertainty are presented and applied to two case studies. During the validation process for stochastic models, a question arises as to the sufficiency of the number of acceptable model realizations (in terms of conformity with validation data). Using a hierarchical approach to make this determination is proposed. This approach is based on computing five measures or metrics and following a decision tree to determine if a sufficient number of realizations attain satisfactory scores regarding how they represent the field data used for calibration (old) and used for validation (new). The first two of these measures are applied to hypothetical scenarios using the first case study and assuming field data consistent with the model or significantly different from the model results. In both cases it is shown how the two measures would lead to the appropriate decision about the model performance. Standard statistical tests are used to evaluate these measures with the results indicating they are appropriate measures for evaluating model realizations. The use of validation data to constrain model input parameters is shown for the second case study using a Bayesian approach known as Markov Chain Monte Carlo. The approach shows a great potential to be helpful in the validation process and in incorporating prior knowledge with new field data to derive posterior distributions for both model input and output.« less
Loureiro, Luiz de França Bahia; de Freitas, Paulo Barbosa
2016-04-01
Badminton requires open and fast actions toward the shuttlecock, but there is no specific agility test for badminton players with specific movements. To develop an agility test that simultaneously assesses perception and motor capacity and examine the test's concurrent and construct validity and its test-retest reliability. The Badcamp agility test consists of running as fast as possible to 6 targets placed on the corners and middle points of a rectangular area (5.6 × 4.2 m) from the start position located in the center of it, following visual stimuli presented in a luminous panel. The authors recruited 43 badminton players (17-32 y old) to evaluate concurrent (with shuttle-run agility test--SRAT) and construct validity and test-retest reliability. Results revealed that Badcamp presents concurrent and construct validity, as its performance is strongly related to SRAT (ρ = 0.83, P < .001), with performance of experts being better than nonexpert players (P < .01). In addition, Badcamp is reliable, as no difference (P = .07) and a high intraclass correlation (ICC = .93) were found in the performance of the players on 2 different occasions. The findings indicate that Badcamp is an effective, valid, and reliable tool to measure agility, allowing coaches and athletic trainers to evaluate players' athletic condition and training effectiveness and possibly detect talented individuals in this sport.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Li, Yuanyuan; Diao, Ruisheng; Huang, Renke
Maintaining good quality of power plant stability models is of critical importance to ensure the secure and economic operation and planning of today’s power grid with its increasing stochastic and dynamic behavior. According to North American Electric Reliability (NERC) standards, all generators in North America with capacities larger than 10 MVA are required to validate their models every five years. Validation is quite costly and can significantly affect the revenue of generator owners, because the traditional staged testing requires generators to be taken offline. Over the past few years, validating and calibrating parameters using online measurements including phasor measurement unitsmore » (PMUs) and digital fault recorders (DFRs) has been proven to be a cost-effective approach. In this paper, an innovative open-source tool suite is presented for validating power plant models using PPMV tool, identifying bad parameters with trajectory sensitivity analysis, and finally calibrating parameters using an ensemble Kalman filter (EnKF) based algorithm. The architectural design and the detailed procedures to run the tool suite are presented, with results of test on a realistic hydro power plant using PMU measurements for 12 different events. The calibrated parameters of machine, exciter, governor and PSS models demonstrate much better performance than the original models for all the events and show the robustness of the proposed calibration algorithm.« less
Walls, Brittany D; Wallace, Elizabeth R; Brothers, Stacey L; Berry, David T R
2017-12-01
Recent concern about malingered self-report of symptoms of attention-deficit hyperactivity disorder (ADHD) in college students has resulted in an urgent need for scales that can detect feigning of this disorder. The present study provided further validation data for a recently developed validity scale for the Conners' Adult ADHD Rating Scale (CAARS), the CAARS Infrequency Index (CII), as well as for the Inconsistency Index (INC). The sample included 139 undergraduate students: 21 individuals with diagnoses of ADHD, 29 individuals responding honestly, 54 individuals responding randomly (full or half), and 35 individuals instructed to feign. Overall, the INC showed moderate sensitivity to random responding (.44-.63) and fairly high specificity to ADHD (.86-.91). The CII demonstrated modest sensitivity to feigning (.31-.46) and excellent specificity to ADHD (.91-.95). Sequential application of validity scales had correct classification rates of honest (93.1%), ADHD (81.0%), feigning (57.1%), half random (42.3%), and full random (92.9%). The present study suggests that the CII is modestly sensitive (true positive rate) to feigned ADHD symptoms, and highly specific (true negative rate) to ADHD. Additionally, this study highlights the utility of applying the CAARS validity scales in a sequential manner for identifying feigning. (PsycINFO Database Record (c) 2017 APA, all rights reserved).
Evaluation of the Validity and Reliability of the Waterlow Pressure Ulcer Risk Assessment Scale.
Charalambous, Charalambos; Koulori, Agoritsa; Vasilopoulos, Aristidis; Roupa, Zoe
2018-04-01
Prevention is the ideal strategy to tackle the problem of pressure ulcers. Pressure ulcer risk assessment scales are one of the most pivotal measures applied to tackle the problem, much criticisms has been developed regarding the validity and reliability of these scales. To investigate the validity and reliability of the Waterlow pressure ulcer risk assessment scale. The methodology used is a narrative literature review, the bibliography was reviewed through Cinahl, Pubmed, EBSCO, Medline and Google scholar, 26 scientific articles where identified. The articles where chosen due to their direct correlation with the objective under study and their scientific relevance. The construct and face validity of the Waterlow appears adequate, but with regards to content validity changes in the category age and gender can be beneficial. The concurrent validity cannot be assessed. The predictive validity of the Waterlow is characterized by high specificity and low sensitivity. The inter-rater reliability has been demonstrated to be inadequate, this may be due to lack of clear definitions within the categories and differentiating level of knowledge between the users. Due to the limitations presented regarding the validity and reliability of the Waterlow pressure ulcer risk assessment scale, the scale should be used in conjunction with clinical assessment to provide optimum results.
The 1980 Large space systems technology. Volume 2: Base technology
NASA Technical Reports Server (NTRS)
Kopriver, F., III (Compiler)
1981-01-01
Technology pertinent to large antenna systems, technology related to large space platform systems, and base technology applicable to both antenna and platform systems are discussed. Design studies, structural testing results, and theoretical applications are presented with accompanying validation data. A total systems approach including controls, platforms, and antennas is presented as a cohesive, programmatic plan for large space systems.
A simple mass-conserved level set method for simulation of multiphase flows
NASA Astrophysics Data System (ADS)
Yuan, H.-Z.; Shu, C.; Wang, Y.; Shu, S.
2018-04-01
In this paper, a modified level set method is proposed for simulation of multiphase flows with large density ratio and high Reynolds number. The present method simply introduces a source or sink term into the level set equation to compensate the mass loss or offset the mass increase. The source or sink term is derived analytically by applying the mass conservation principle with the level set equation and the continuity equation of flow field. Since only a source term is introduced, the application of the present method is as simple as the original level set method, but it can guarantee the overall mass conservation. To validate the present method, the vortex flow problem is first considered. The simulation results are compared with those from the original level set method, which demonstrates that the modified level set method has the capability of accurately capturing the interface and keeping the mass conservation. Then, the proposed method is further validated by simulating the Laplace law, the merging of two bubbles, a bubble rising with high density ratio, and Rayleigh-Taylor instability with high Reynolds number. Numerical results show that the mass is a well-conserved by the present method.
Gupta, Abhishek; Singh, Yogendra; Srinivas, Kona S.; Jain, Garima; Sreekumar, V. B.; Semwal, Vinod Prasad
2010-01-01
Objective: Arterolane maleate is an antimalarial drug currently under Phase III clinical evaluation, and presents a simple, economical and scalable synthesis, and does not suffer from safety problems. Arterolane maleate is more active than artemisinin; and is cheap to produce. It has a longer lifetime in the plasma, so it stays active longer in the body. To provide quality control over the manufacture of any API, it is essential to develop highly selective analytical methods. In the current article we are reporting the development and validation of a rapid and specific Head space gas chromatographic (HSGC) method for the determination of organic volatile impurities (residual solvents) in Arterolane Maleate bulk drug. Materials and Methods: The method development and its validation were performed on Perkin Elmer's gas chromatographic system equipped with Flame Ionization detector and head space analyzer. The method involved a thermal gradient elution of ten residual solvents present in arterolane maleate salt in RTx-624, 30 m × 0.32 mm, 1.8 μ column using nitrogen gas as a carrier. The flow rate was 0.5 ml/min and flame ionization detector (FID) was used. Results: During method validation, parameters such as precision, linearity, accuracy, limit of quantification and detection and specificity were evaluated, which remained within acceptable limits. Conclusions: The method has been successfully applied for the quantification of the amount of residual solvents present in arterolane maleate bulk drug.The method presents a simple and reliable solution for the routine quantitative analysis of residual solvents in Arterolane maleate bulk drug. PMID:21814428
METAPHOR: Probability density estimation for machine learning based photometric redshifts
NASA Astrophysics Data System (ADS)
Amaro, V.; Cavuoti, S.; Brescia, M.; Vellucci, C.; Tortora, C.; Longo, G.
2017-06-01
We present METAPHOR (Machine-learning Estimation Tool for Accurate PHOtometric Redshifts), a method able to provide a reliable PDF for photometric galaxy redshifts estimated through empirical techniques. METAPHOR is a modular workflow, mainly based on the MLPQNA neural network as internal engine to derive photometric galaxy redshifts, but giving the possibility to easily replace MLPQNA with any other method to predict photo-z's and their PDF. We present here the results about a validation test of the workflow on the galaxies from SDSS-DR9, showing also the universality of the method by replacing MLPQNA with KNN and Random Forest models. The validation test include also a comparison with the PDF's derived from a traditional SED template fitting method (Le Phare).
Implementation and validation of a CubeSat laser transmitter
NASA Astrophysics Data System (ADS)
Kingsbury, R. W.; Caplan, D. O.; Cahoy, K. L.
2016-03-01
The paper presents implementation and validation results for a CubeSat-scale laser transmitter. The master oscillator power amplifier (MOPA) design produces a 1550 nm, 200mW average power optical signal through the use of a directly modulated laser diode and a commercial fiber amplifier. The prototype design produces high-fidelity M-ary pulse position modulated (PPM) waveforms (M=8 to 128), targeting data rates > 10 Mbit/s while meeting a constraining 8W power allocation. We also present the implementation of an avalanche photodiode (APD) receiver with measured transmitter-to-receiver performance within 3 dB of theory. Via loopback, the compact receiver design can provide built-in self-test and calibration capabilities, and supports incremental on-orbit testing of the design.
Benchmarking the Collocation Stand-Alone Library and Toolkit (CSALT)
NASA Technical Reports Server (NTRS)
Hughes, Steven; Knittel, Jeremy; Shoan, Wendy; Kim, Youngkwang; Conway, Claire; Conway, Darrel J.
2017-01-01
This paper describes the processes and results of Verification and Validation (VV) efforts for the Collocation Stand Alone Library and Toolkit (CSALT). We describe the test program and environments, the tools used for independent test data, and comparison results. The VV effort employs classical problems with known analytic solutions, solutions from other available software tools, and comparisons to benchmarking data available in the public literature. Presenting all test results are beyond the scope of a single paper. Here we present high-level test results for a broad range of problems, and detailed comparisons for selected problems.
Benchmarking the Collocation Stand-Alone Library and Toolkit (CSALT)
NASA Technical Reports Server (NTRS)
Hughes, Steven; Knittel, Jeremy; Shoan, Wendy (Compiler); Kim, Youngkwang; Conway, Claire (Compiler); Conway, Darrel
2017-01-01
This paper describes the processes and results of Verification and Validation (V&V) efforts for the Collocation Stand Alone Library and Toolkit (CSALT). We describe the test program and environments, the tools used for independent test data, and comparison results. The V&V effort employs classical problems with known analytic solutions, solutions from other available software tools, and comparisons to benchmarking data available in the public literature. Presenting all test results are beyond the scope of a single paper. Here we present high-level test results for a broad range of problems, and detailed comparisons for selected problems.
Nessen, Thomas; Demmelmaier, Ingrid; Nordgren, Birgitta; Opava, Christina H
2015-01-01
The aim of the present study was to investigate aspects of reliability and validity of the Exercise Self-Efficacy Scale (ESES-S) in a rheumatoid arthritis (RA) population. A total of 244 people with RA participating in a physical activity study were included. The six-item ESES-S, exploring confidence in performing exercise, was assessed for test-retest reliability over 4-6 months, and for internal consistency. Construct validity investigated correlation with similar and other constructs. An intraclass correlation coefficient (ICC) of 0.59 (95% CI 0.37-0.73) was found for 84 participants with stable health perceptions between measurement occasions. Cronbach's alpha coefficients of 0.87 and 0.89 were found at the first and second measurements. Corrected item-total correlation single ESES-S items ranged between 0.53 and 0.73. Construct convergent validity for the ESES-S was partly confirmed by correlations with health-enhancing physical activity and outcome expectations respectively (Pearson's r = 0.18, p < 0.01). Construct divergent validity was confirmed by the absence of correlations with age or gender. No floor or ceiling effects were found for ESES-S. The results indicate that the ESES-S has moderate test-retest reliability and respectable internal consistency in people with RA. Construct validity was partially supported in the present sample. Further research on construct validity of the ESES-S is recommended. Physical exercise is crucial for management of symptoms and co-morbidity in rheumatoid arthritis. Self-efficacy for exercise is important to address in rehabilitation as it regulates exercise motivation and behavior. Measurement properties of self-efficacy scales need to be assessed in specific populations and different languages.
NASA Astrophysics Data System (ADS)
Szekely, Tanguy; Killick, Rachel; Gourrion, Jerome; Reverdin, Gilles
2017-04-01
CORA and EN4 are both global delayed time mode validated in-situ ocean temperature and salinity datasets distributed by the Met Office (http://www.metoffice.gov.uk/) and Copernicus (www.marine.copernicus.eu). A large part of the profiles distributed by CORA and EN4 in recent years are Argo profiles from the ARGO DAC, but profiles are also extracted from the World Ocean Database and TESAC profiles from GTSPP. In the case of CORA, data coming from the EUROGOOS Regional operationnal oserving system( ROOS) operated by European institutes no managed by National Data Centres and other datasets of profiles povided by scientific sources can also be found (Sea mammals profiles from MEOP, XBT datasets from cruises ...). (EN4 also takes data from the ASBO dataset to supplement observations in the Arctic). First advantage of this new merge product is to enhance the space and time coverage at global and european scales for the period covering 1950 till a year before the current year. This product is updated once a year and T&S gridded fields are alos generated for the period 1990-year n-1. The enhancement compared to the revious CORA product will be presented Despite the fact that the profiles distributed by both datasets are mostly the same, the quality control procedures developed by the Met Office and Copernicus teams differ, sometimes leading to different quality control flags for the same profile. Started in 2016 a new study started that aims to compare both validation procedures to move towards a Copernicus Marine Service dataset with the best features of CORA and EN4 validation.A reference data set composed of the full set of in-situ temperature and salinity measurements collected by Coriolis during 2015 is used. These measurements have been made thanks to wide range of instruments (XBTs, CTDs, Argo floats, Instrumented sea mammals,...), covering the global ocean. The reference dataset has been validated simultaneously by both teams.An exhaustive comparison of the validation test results is now performed to find the best features of both datasets. The study shows the differences between the EN4 and CORA validation results. It highlights the complementarity between the EN4 and CORA higher order tests. The design of the CORA and EN4 validation charts is discussed to understand how a different approach on the dataset scope can lead to differences in data validation. The new validation chart of the Copernicus Marine Service dataset is presented.
Anderson, Ruth A.; Hsieh, Pi-Ching; Su, Hui Fang; Landerman, Lawrence R.; McDaniel, Reuben R.
2013-01-01
Objectives. To (1) describe participation in decision-making as a systems-level property of complex adaptive systems and (2) present empirical evidence of reliability and validity of a corresponding measure. Method. Study 1 was a mail survey of a single respondent (administrators or directors of nursing) in each of 197 nursing homes. Study 2 was a field study using random, proportionally stratified sampling procedure that included 195 organizations with 3,968 respondents. Analysis. In Study 1, we analyzed the data to reduce the number of scale items and establish initial reliability and validity. In Study 2, we strengthened the psychometric test using a large sample. Results. Results demonstrated validity and reliability of the participation in decision-making instrument (PDMI) while measuring participation of workers in two distinct job categories (RNs and CNAs). We established reliability at the organizational level aggregated items scores. We established validity of the multidimensional properties using convergent and discriminant validity and confirmatory factor analysis. Conclusions. Participation in decision making, when modeled as a systems-level property of organization, has multiple dimensions and is more complex than is being traditionally measured. Managers can use this model to form decision teams that maximize the depth and breadth of expertise needed and to foster connection among them. PMID:24349771
[Development and Testing of the Taiwanese Hospital Nurses' Job Satisfaction Scale].
Tzeng, Wen-Chii; Lin, Chiou-Fen; Lin, Lih-Ying; Lu, Meei-Shiow; Chiang, Li-Chi
2017-04-01
In the context of professional nursing, the concept of job satisfaction includes the degree to which a nurse is satisfied with the nursing profession, his/her personal adaptation to this profession, and his/her current working environment. No validated scale that addresses the job satisfaction of nurses working in hospitals currently exists in Taiwan. To develop a reliable and validated scale for measuring the job satisfaction of hospital nurses in Taiwan. A three-phase, cross-sectional study design was used. First, a literature review and expert focus group discussion were conducted to develop the initial scale items. Second, experts were invited to validate the content of the draft scale. Finally, convenience sampling was used to recruit 427 hospital nurses from 6 hospitals. These nurses completed the scale and the results were analyzed using item analysis, factor analysis, and internal consistency analysis. The 31-item Taiwanese hospital nurse job satisfaction scale developed in the present study addresses 5 factors, including supportive working environment, professional autonomy and growth, interpersonal interaction and collaboration, leadership style, and nursing workload. The overall Cronbach's α was .96. The results indicate that the developed scale provides good reliability and validity. This study confirms the validity and reliability of the developed scale. It may be used to measure the job satisfaction of nurses working in hospitals.
Anderson, Ruth A; Plowman, Donde; Corazzini, Kirsten; Hsieh, Pi-Ching; Su, Hui Fang; Landerman, Lawrence R; McDaniel, Reuben R
2013-01-01
Objectives. To (1) describe participation in decision-making as a systems-level property of complex adaptive systems and (2) present empirical evidence of reliability and validity of a corresponding measure. Method. Study 1 was a mail survey of a single respondent (administrators or directors of nursing) in each of 197 nursing homes. Study 2 was a field study using random, proportionally stratified sampling procedure that included 195 organizations with 3,968 respondents. Analysis. In Study 1, we analyzed the data to reduce the number of scale items and establish initial reliability and validity. In Study 2, we strengthened the psychometric test using a large sample. Results. Results demonstrated validity and reliability of the participation in decision-making instrument (PDMI) while measuring participation of workers in two distinct job categories (RNs and CNAs). We established reliability at the organizational level aggregated items scores. We established validity of the multidimensional properties using convergent and discriminant validity and confirmatory factor analysis. Conclusions. Participation in decision making, when modeled as a systems-level property of organization, has multiple dimensions and is more complex than is being traditionally measured. Managers can use this model to form decision teams that maximize the depth and breadth of expertise needed and to foster connection among them.
Lindskog, Marcus; Winman, Anders; Juslin, Peter; Poom, Leo
2013-01-01
Two studies investigated the reliability and predictive validity of commonly used measures and models of Approximate Number System acuity (ANS). Study 1 investigated reliability by both an empirical approach and a simulation of maximum obtainable reliability under ideal conditions. Results showed that common measures of the Weber fraction (w) are reliable only when using a substantial number of trials, even under ideal conditions. Study 2 compared different purported measures of ANS acuity as for convergent and predictive validity in a within-subjects design and evaluated an adaptive test using the ZEST algorithm. Results showed that the adaptive measure can reduce the number of trials needed to reach acceptable reliability. Only direct tests with non-symbolic numerosity discriminations of stimuli presented simultaneously were related to arithmetic fluency. This correlation remained when controlling for general cognitive ability and perceptual speed. Further, the purported indirect measure of ANS acuity in terms of the Numeric Distance Effect (NDE) was not reliable and showed no sign of predictive validity. The non-symbolic NDE for reaction time was significantly related to direct w estimates in a direction contrary to the expected. Easier stimuli were found to be more reliable, but only harder (7:8 ratio) stimuli contributed to predictive validity. PMID:23964256
A calibration hierarchy for risk models was defined: from utopia to empirical data.
Van Calster, Ben; Nieboer, Daan; Vergouwe, Yvonne; De Cock, Bavo; Pencina, Michael J; Steyerberg, Ewout W
2016-06-01
Calibrated risk models are vital for valid decision support. We define four levels of calibration and describe implications for model development and external validation of predictions. We present results based on simulated data sets. A common definition of calibration is "having an event rate of R% among patients with a predicted risk of R%," which we refer to as "moderate calibration." Weaker forms of calibration only require the average predicted risk (mean calibration) or the average prediction effects (weak calibration) to be correct. "Strong calibration" requires that the event rate equals the predicted risk for every covariate pattern. This implies that the model is fully correct for the validation setting. We argue that this is unrealistic: the model type may be incorrect, the linear predictor is only asymptotically unbiased, and all nonlinear and interaction effects should be correctly modeled. In addition, we prove that moderate calibration guarantees nonharmful decision making. Finally, results indicate that a flexible assessment of calibration in small validation data sets is problematic. Strong calibration is desirable for individualized decision support but unrealistic and counter productive by stimulating the development of overly complex models. Model development and external validation should focus on moderate calibration. Copyright © 2016 Elsevier Inc. All rights reserved.
The Study of High-Speed Surface Dynamics Using a Pulsed Proton Beam
NASA Astrophysics Data System (ADS)
Buttler, William; Stone, Benjamin; Oro, David; Dimonte, Guy; Preston, Dean; Cherne, Frank; Germann, Timothy; Terrones, Guillermo; Tupa, Dale
2011-06-01
Los Alamos National Laboratory is presently engaged in development and implementation of ejecta source term and transport models for integration into LANL hydrodynamic computer codes. Experimental support for the effort spans a broad array of activities, including ejecta source term measurements from machine roughened Sn surfaces shocked by HE or flyer plates. Because the underlying postulate for ejecta formation is that ejecta are characterized by Richtmyer-Meshkov instability (RMI) phenomena, a key element of the theory and modeling effort centers on validation and verification RMI experiments at the LANSCE Proton Radiography Facility (pRad) to compare with modeled ejecta measurements. Here we present experimental results used to define and validate a physics based ejecta model together with remarkable, unexpected results of Sn instability growth in vacuum and gasses, and Sn and Cu RM growth that reveals the sensitivity of the RM instability to the yield strength of the material, Cu. The motivation of this last subject, RM growth linked to material strength, is to probe the shock pressure regions over which ejecta begins to form. Presenter
GADEN: A 3D Gas Dispersion Simulator for Mobile Robot Olfaction in Realistic Environments.
Monroy, Javier; Hernandez-Bennets, Victor; Fan, Han; Lilienthal, Achim; Gonzalez-Jimenez, Javier
2017-06-23
This work presents a simulation framework developed under the widely used Robot Operating System (ROS) to enable the validation of robotics systems and gas sensing algorithms under realistic environments. The framework is rooted in the principles of computational fluid dynamics and filament dispersion theory, modeling wind flow and gas dispersion in 3D real-world scenarios (i.e., accounting for walls, furniture, etc.). Moreover, it integrates the simulation of different environmental sensors, such as metal oxide gas sensors, photo ionization detectors, or anemometers. We illustrate the potential and applicability of the proposed tool by presenting a simulation case in a complex and realistic office-like environment where gas leaks of different chemicals occur simultaneously. Furthermore, we accomplish quantitative and qualitative validation by comparing our simulated results against real-world data recorded inside a wind tunnel where methane was released under different wind flow profiles. Based on these results, we conclude that our simulation framework can provide a good approximation to real world measurements when advective airflows are present in the environment.
GADEN: A 3D Gas Dispersion Simulator for Mobile Robot Olfaction in Realistic Environments
Hernandez-Bennetts, Victor; Fan, Han; Lilienthal, Achim; Gonzalez-Jimenez, Javier
2017-01-01
This work presents a simulation framework developed under the widely used Robot Operating System (ROS) to enable the validation of robotics systems and gas sensing algorithms under realistic environments. The framework is rooted in the principles of computational fluid dynamics and filament dispersion theory, modeling wind flow and gas dispersion in 3D real-world scenarios (i.e., accounting for walls, furniture, etc.). Moreover, it integrates the simulation of different environmental sensors, such as metal oxide gas sensors, photo ionization detectors, or anemometers. We illustrate the potential and applicability of the proposed tool by presenting a simulation case in a complex and realistic office-like environment where gas leaks of different chemicals occur simultaneously. Furthermore, we accomplish quantitative and qualitative validation by comparing our simulated results against real-world data recorded inside a wind tunnel where methane was released under different wind flow profiles. Based on these results, we conclude that our simulation framework can provide a good approximation to real world measurements when advective airflows are present in the environment. PMID:28644375
Tolfvenstam, Thomas; Thein, Tun-Linn; Naim, Ahmad Nazri Mohamed; Ling, Ling; Chow, Angelia; Chen, Mark I-Cheng; Ooi, Eng Eong; Leo, Yee Sin; Hibberd, Martin L.
2016-01-01
Background Dengue results in a significant public health burden in endemic regions. The World Health Organization (WHO) recommended the use of warning signs (WS) to stratify patients at risk of severe dengue disease in 2009. However, WS is limited in stratifying adult dengue patients at early infection (Day 1–3 post fever), who require close monitoring in hospitals to prevent severe dengue. The aim of this study is to identify and validate prognostic models, built with differentially expressed biomarkers, that enable the early identification of those with early dengue infection that require close clinical monitoring. Methods RNA microarray and protein assays were performed to identify differentially expressed biomarkers of severity among 92 adult dengue patients recruited at early infection from years 2005–2008. This comprised 47 cases who developed WS after first presentation and required hospitalization (WS+Hosp), as well as 45 controls who did not develop WS after first presentation and did not require hospitalization (Non-WS+Non-Hosp). Independent validation was conducted with 80 adult dengue patients recruited from years 2009–2012. Prognostic models were developed based on forward stepwise and backward elimination estimation, using multiple logistic regressions. Prognostic power was estimated by the area under the receiver operating characteristic curve (AUC). Results The WS+Hosp group had significantly higher viral load (P<0.001), lower platelet (P<0.001) and lymphocytes counts (P = 0.004) at early infection compared to the Non-WS+Non-Hosp group. From the RNA microarray and protein assays, the top single RNA and protein prognostic models at early infection were CCL8 RNA (AUC:0.73) and IP-10 protein (AUC:0.74), respectively. The model with CCL8, VPS13C RNA, uPAR protein, and with CCL8, VPS13C RNA and platelets were the best biomarker models for stratifying adult dengue patients at early infection, with sensitivity and specificity up to 83% and 84%, respectively. These results were tested in the independent validation group, showing sensitivity and specificity up to 96% and 54.6%, respectively. Conclusions At early infection, adult dengue patients who later presented WS and require hospitalization have significantly different pathophysiology compared with patients who consistently presented no WS and / or require no hospitalization. The molecular prognostic models developed and validated here based on these pathophysiology differences, could offer earlier and complementary indicators to the clinical WHO 2009 WS guide, in order to triage adult dengue patients at early infection. PMID:27286230
San Alberto Giraldos, Mercedes; López Leiva, Inmaculada; León Campos, Álvaro; Martí García, Celia; García Mayor, Silvia
2018-01-01
Aims To adapt the Edinburgh Feeding Evaluation in Dementia Scale (EdFED) for use in a Spanish-speaking population and to assess its validity and reliability in patients with dementia. Method A cross-sectional study was carried out in two stages: 1. Cross-cultural adaptation (translation, back-translation, review by committee of experts, pilot test and weighting of results); 2. Clinimetric validation comprising interobserver reliability assessment, test-retest reliability and internal consistency. To determine construct validity, confirmatory factorial analysis and principal components analysis were performed by oblique rotations. Criteria validity was analysed using the Pearson correlation (p<0.05) with the BMI, MNA and analytical values of albumin, transferrin, cholesterol, absolute lymphocytes and total proteins. Data collection was carried out for six months in 2016 in nursing homes and Alzheimer’s day centers in the province of Málaga (Spain), at nine centers, with 262 patients (aged over 60 years and presenting feeding difficulties), 20 nurses, 20 professional caregivers and 103 family caregivers. Results A version of EdFED culturally adapted to Spanish was obtained. The sample presented the following characteristics: 76.3% women, mean age 82.3 years (SD: 7.9); MNA 18.73 (SD: 4.44); BMI 23.99 (SD: 4.72); serum albumin 3.79 mg/dl (SD: 0.36). A Cronbach’s alpha of 0.88 was obtained, with an inter-item global correlation of 0.43 and a homogeneity index ranging from 0.42 to 0.73. The exploratory factor analysis reproduced the three-factor model identified by the original authors, explaining 62.32% of the total variance. The criterion validity showed a good inverse correlation with MNA and a moderate one with albumin, total proteins, transferrin and BMI. Discussion The Spanish version of EdFED is reliable and valid for use in elderly people with dementia. The most appropriate for our environment is the three-factor model, which maintains the original factors, with a slight redistribution of the items. PMID:29486002
Richard's, María M; Introzzi, Isabel; Zamora, Eliana; Vernucci, Santiago
2017-01-01
Inhibition is one of the main executive functions, because of its fundamental role in cognitive and social development. Given the importance of reliable and computerized measurements to assessment inhibitory performance, this research intends to analyze the internal and external criteria of validity of a computerized conjunction search task, to evaluate the role of perceptual inhibition. A sample of 41 children (21 females and 20 males), aged between 6 and 11 years old (M = 8.49, SD = 1.47), intentionally selected from a private management school of Mar del Plata (Argentina), middle socio-economic level were assessed. The Conjunction Search Task from the TAC Battery, Coding and Symbol Search tasks from Wechsler Intelligence Scale for Children were used. Overall, results allow us to confirm that the perceptual inhibition task form TAC presents solid rates of internal and external validity that make a valid measurement instrument of this process.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Boero, Riccardo; Edwards, Brian Keith
Economists use computable general equilibrium (CGE) models to assess how economies react and self-organize after changes in policies, technology, and other exogenous shocks. CGE models are equation-based, empirically calibrated, and inspired by Neoclassical economic theory. The focus of this work was to validate the National Infrastructure Simulation and Analysis Center (NISAC) CGE model and apply it to the problem of assessing the economic impacts of severe events. We used the 2012 Hurricane Sandy event as our validation case. In particular, this work first introduces the model and then describes the validation approach and the empirical data available for studying themore » event of focus. Shocks to the model are then formalized and applied. Finally, model results and limitations are presented and discussed, pointing out both the model degree of accuracy and the assessed total damage caused by Hurricane Sandy.« less
Singh, Aparna; Singh, Girish; Patwardhan, Kishor; Gehlot, Sangeeta
2017-01-01
According to Ayurveda, the traditional system of healthcare of Indian origin, Agni is the factor responsible for digestion and metabolism. Four functional states (Agnibala) of Agni have been recognized: regular, irregular, intense, and weak. The objective of the present study was to develop and validate a self-assessment tool to estimate Agnibala The developed tool was evaluated for its reliability and validity by administering it to 300 healthy volunteers of either gender belonging to 18 to 40-year age group. Besides confirming the statistical validity and reliability, the practical utility of the newly developed tool was also evaluated by recording serum lipid parameters of all the volunteers. The results show that the lipid parameters vary significantly according to the status of Agni The tool, therefore, may be used to screen normal population to look for possible susceptibility to certain health conditions. © The Author(s) 2016.
Lock, Irina; Seele, Peter
2017-01-01
Credibility is central to communication but often jeopardized by “credibility gaps.” This is especially true for communication about corporate social responsibility (CSR). To date, no tool has been available to analyze stakeholders’ credibility perceptions of CSR communication. This article presents a series of studies conducted to develop a scale to assess the perceived credibility of CSR reports, one of CSR communication’s most important tools. The scale provides a novel operationalization of credibility using validity claims of Habermas’s ideal speech situation as subdimensions. The scale development process, carried out in five studies including a literature review, a Delphi study, and three validation studies applying confirmatory factor analysis, resulted in the 16-item Perceived Credibility (PERCRED) scale. The scale shows convergent, discriminant, concurrent, and nomological validity and is the first validated measure for analyzing credibility perceptions of CSR reports. PMID:29278260
Quality of Work: Validation of a New Instrument in Three Languages
Steffgen, Georges; Kohl, Diane; Reese, Gerhard; Happ, Christian; Sischka, Philipp
2015-01-01
Introduction and objective: A new instrument to measure quality of work was developed in three languages (German, French and Luxembourgish) and validated in a study of employees working in Luxembourg. Methods and results: A representative sample (n = 1529) was taken and exploratory factor analysis revealed a six-factor solution for the 21-item instrument (satisfaction and respect, mobbing, mental strain at work, cooperation, communication and feedback, and appraisal). Reliability analysis showed satisfying reliability for all six factors and the total questionnaire. In order to examine the construct validity of the new instrument, regression analyses were conducted to test whether the instrument predicted work characteristics’ influence on three components of well-being—burnout, psychological stress and maladaptive coping behaviors. Conclusion: The present validation offers a trilingual inventory for measuring quality of work that may be used, for example, as an assessment tool or for testing the effectiveness of interventions. PMID:26703634
NASA Astrophysics Data System (ADS)
Morton, Timothy D.; Bryson, Stephen T.; Coughlin, Jeffrey L.; Rowe, Jason F.; Ravichandran, Ganesh; Petigura, Erik A.; Haas, Michael R.; Batalha, Natalie M.
2016-05-01
We present astrophysical false positive probability calculations for every Kepler Object of Interest (KOI)—the first large-scale demonstration of a fully automated transiting planet validation procedure. Out of 7056 KOIs, we determine that 1935 have probabilities <1% of being astrophysical false positives, and thus may be considered validated planets. Of these, 1284 have not yet been validated or confirmed by other methods. In addition, we identify 428 KOIs that are likely to be false positives, but have not yet been identified as such, though some of these may be a result of unidentified transit timing variations. A side product of these calculations is full stellar property posterior samplings for every host star, modeled as single, binary, and triple systems. These calculations use vespa, a publicly available Python package that is able to be easily applied to any transiting exoplanet candidate.
Validation of Blockage Interference Corrections in the National Transonic Facility
NASA Technical Reports Server (NTRS)
Walker, Eric L.
2007-01-01
A validation test has recently been constructed for wall interference methods as applied to the National Transonic Facility (NTF). The goal of this study was to begin to address the uncertainty of wall-induced-blockage interference corrections, which will make it possible to address the overall quality of data generated by the facility. The validation test itself is not specific to any particular modeling. For this present effort, the Transonic Wall Interference Correction System (TWICS) as implemented at the NTF is the mathematical model being tested. TWICS uses linear, potential boundary conditions that must first be calibrated. These boundary conditions include three different classical, linear. homogeneous forms that have been historically used to approximate the physical behavior of longitudinally slotted test section walls. Results of the application of the calibrated wall boundary conditions are discussed in the context of the validation test.
Quantitative bioanalysis of strontium in human serum by inductively coupled plasma-mass spectrometry
Somarouthu, Srikanth; Ohh, Jayoung; Shaked, Jonathan; Cunico, Robert L; Yakatan, Gerald; Corritori, Suzana; Tami, Joe; Foehr, Erik D
2015-01-01
Aim: A bioanalytical method using inductively-coupled plasma-mass spectrometry to measure endogenous levels of strontium in human serum was developed and validated. Results & methodology: This article details the experimental procedures used for the method development and validation thus demonstrating the application of the inductively-coupled plasma-mass spectrometry method for quantification of strontium in human serum samples. The assay was validated for specificity, linearity, accuracy, precision, recovery and stability. Significant endogenous levels of strontium are present in human serum samples ranging from 19 to 96 ng/ml with a mean of 34.6 ± 15.2 ng/ml (SD). Discussion & conclusion: Calibration procedures and sample pretreatment were simplified for high throughput analysis. The validation demonstrates that the method was sensitive, selective for quantification of strontium (88Sr) and is suitable for routine clinical testing of strontium in human serum samples. PMID:28031925
Validation/Calibration of SMOS L2 Soil Moisture in Crop Area, Eastern China
NASA Astrophysics Data System (ADS)
Cui, Huizhen; Jiang, Lingmei; Yang, Na; Lu, Zheng
2016-08-01
The Soil Moisture and Ocean Salinity (SMOS) is the worldwide satellite dedicated to retrieve soil moisture information at the global scale, with a high temporal resolution, and from space borne L-band 2-D interferometry radiometer. Product validation for the accuracy of data and utilization is a crucial step. At present, the validation work carried out in China was mainly concentrated in the Tibetan Plateau. The study of this paper mainly focused on the validation of SMOS L2 soil moisture data products in the north of Henan province plain region. This region is in front of Taihang Mountains. Results from the average-average and node- site comparison show that the correlation coefficients (R) between 0.20 and 0.40, also the existence of dry bias mainly concentrated in the 0.07 0.11m3m-3. Finally, this paper analysed the influence factors on the quality of SMOS soil moisture products.
Lock, Irina; Seele, Peter
2017-11-01
Credibility is central to communication but often jeopardized by "credibility gaps." This is especially true for communication about corporate social responsibility (CSR). To date, no tool has been available to analyze stakeholders' credibility perceptions of CSR communication. This article presents a series of studies conducted to develop a scale to assess the perceived credibility of CSR reports, one of CSR communication's most important tools. The scale provides a novel operationalization of credibility using validity claims of Habermas's ideal speech situation as subdimensions. The scale development process, carried out in five studies including a literature review, a Delphi study, and three validation studies applying confirmatory factor analysis, resulted in the 16-item Perceived Credibility (PERCRED) scale. The scale shows convergent, discriminant, concurrent, and nomological validity and is the first validated measure for analyzing credibility perceptions of CSR reports.
Design, Development, and Preliminary Validation for a BioContainment System for MSR
NASA Astrophysics Data System (ADS)
Fumagalli, A.; Spagnoli, B.; Terribile, A.; Indrigo, D.; Romstedt, J.; Vjendran, S.; Kminek, G.
2018-04-01
A bio-containment system was conceived, designed, and tested by Leonardo S.p.A. and partners under ESA development contract. Results achieved so far are presented, including reports of the several tests performed on development hardware.
Review of TRMM/GPM Rainfall Algorithm Validation
NASA Technical Reports Server (NTRS)
Smith, Eric A.
2004-01-01
A review is presented concerning current progress on evaluation and validation of standard Tropical Rainfall Measuring Mission (TRMM) precipitation retrieval algorithms and the prospects for implementing an improved validation research program for the next generation Global Precipitation Measurement (GPM) Mission. All standard TRMM algorithms are physical in design, and are thus based on fundamental principles of microwave radiative transfer and its interaction with semi-detailed cloud microphysical constituents. They are evaluated for consistency and degree of equivalence with one another, as well as intercompared to radar-retrieved rainfall at TRMM's four main ground validation sites. Similarities and differences are interpreted in the context of the radiative and microphysical assumptions underpinning the algorithms. Results indicate that the current accuracies of the TRMM Version 6 algorithms are approximately 15% at zonal-averaged / monthly scales with precisions of approximately 25% for full resolution / instantaneous rain rate estimates (i.e., level 2 retrievals). Strengths and weaknesses of the TRMM validation approach are summarized. Because the dew of convergence of level 2 TRMM algorithms is being used as a guide for setting validation requirements for the GPM mission, it is important that the GPM algorithm validation program be improved to ensure concomitant improvement in the standard GPM retrieval algorithms. An overview of the GPM Mission's validation plan is provided including a description of a new type of physical validation model using an analytic 3-dimensional radiative transfer model.
Current Status of the Validation of the Atmospheric Chemistry Instruments on Envisat
NASA Astrophysics Data System (ADS)
Lecomte, P.; Koopman, R.; Zehner, C.; Laur, H.; Attema, E.; Wursteisen, P.; Snoeij, P.
2003-04-01
Envisat is ESA's advanced Earth observing satellite launched in March 2002 and is designed to provide measurements of the atmosphere, ocean, land and ice over a five-year period. After the launch and the switch-on period, a six-month commissioning phase has taken place for instrument calibration and geophysical validation, concluded with the Envisat Calibration Review held in September 2002. In addition to ESA and its industrial partners in the Envisat consortium, many other companies and research institutes have contributed to the calibration and validation programme under ESA contract as expert support laboratories (ESLs). A major contribution has also been made by the Principal Investigators of approved proposals submitted to ESA in response to a worldwide "Announcement of Opportunity for the Exploitation of the Envisat Data Products" in 1998. Working teams have been formed in which the different participants worked side by side to achieve the objectives of the calibration and validation programme. Validation is a comparison of Envisat level-2 data products and estimates of the different geophysical variables obtained by independent means, the validation instruments. Validation is closely linked to calibration because inconsistencies discovered in the comparison of Envisat Level 2 data products to well-known external instruments can have many different sources, including inaccuracies of the Envisat instrument calibration and the data calibration algorithms. Therefore, initial validation of the geophysical variables has provided feedback to calibration, de-bugging and algorithm improvement. The initial validation phase ended in December 2002 with the Envisat Validation Workshop at which, for a number of products, a final quality statement was given. Full validation of all data products available from the Atmospheric Chemistry Instruments on Envisat (MIPAS, GOMOS and SCIAMACHY) is quite a challenge and therefore it has been decided to adopt a step-wise approach. As a first step the intention is to arrive at a first quality assessment of the data products for near-real time distribution. This core validation was performed during the commissioning and validation phase of Envisat. The results of this exercise have been presented at the Envisat Validation Workshop. It was already anticipated early in the program that more work needed to be done after this workshop on all Envisat data products both for near-real time and for off-line distribution. The algorithms designed to derive estimates of the atmospheric constitutes need to be verified. For this a large number of correlative observations under a wide range of conditions are needed to arrive at a representative and statistically significant data quality assessment, and to provide insight into sources of error both in the Envisat data and the correlative data sets. In order to achieve this within the tight time schedule the best use must be made of the available resources. For the Atmospheric Chemistry Instruments on Envisat it has therefore been decided to plan a joint geophysical validation programme that is not instrument specific but serves all three instruments. For the co-ordination of the activities the Atmospheric Chemistry Validation Team was formed (ACVT). The ACVT methods can roughly be categorised into different approaches and consistent with these the group is divided into different subgroups on · balloon and aircraft campaigns · ground-based measurements · model assimilation and satellite intercomparison The data coming from the various validation campaigns are stored within a central data storage facility established at the Norwegian Institute for Air Research (NILU) in Norway. NILU provides access to correlative measurements from sensors on-board satellites, aircraft, balloons and ships, as well as from ground-based instruments and numerical models, such as that of the ECMWF. Particular emphasis has been put on the quality control of such data. Users are able to connect with the database to add or retrieve data according to their requirements. Access to such a range of data have strengthened the statistical significance of the results and increased the chances of detecting errors in the processing algorithms. Two types of data are stored in the NILU database, fixed point and transect data. Transect data is only provided for inclusion in the database for selected times which correspond to the satellite overpass. Envisat data is not stored in the NILU database although other correlative satellite data is included to facilitate their comparison with data acquired by Envisat. The European Space Agency (ESA) organised a workshop in Frascati from 9 to 13 December 2002 to review the first results of the validation of the geophysical data products from its environmental satellite Envisat. The objectives of the Envisat Validation Workshop were: . to review the Level 2 product algorithms using the results of the validation campaigns, . to review the geophysical consistency of the Level 2 processor products, . to provide an error estimation of the Level 2 products, . to recommend instrument re-calibration and algorithm development where needed. At the Envisat Validation workshop held in Frascati, Italy, from 9-13 December, scientists and engineers presented analyses of the exhaustive series of tests that have been run on each of Envisat's sensors since the spacecraft was launched in March. On the basis of workshop results it was decided that most of the 73 data products provided by the Envisat instruments are ready for operational delivery. Although the main validation phase for the atmospheric instruments of Envisat will be completed this year, ongoing validation products will continue throughout the lifetime of the Envisat mission. More specifically, the main validation phase (i.e. with intensive validation activities) will be completed in 2003, whereas the long-term validation phase will: - Provide assurance of data quality and accuracy for applications such as climate change research - Investigate the fully representative range of geophysical conditions - Investigate the fully representative range of seasonal cycles - Perform long term monitoring for instrumental drifts and other artefacts - Validate new products. The paper will discuss the general status of the calibration and validation activities for GOMOS, MIPAS and SCIAMACHY. The short-term and long-term validation plans will be presented.
Impact of Learning Model Based on Cognitive Conflict toward Student’s Conceptual Understanding
NASA Astrophysics Data System (ADS)
Mufit, F.; Festiyed, F.; Fauzan, A.; Lufri, L.
2018-04-01
The problems that often occur in the learning of physics is a matter of misconception and low understanding of the concept. Misconceptions do not only happen to students, but also happen to college students and teachers. The existing learning model has not had much impact on improving conceptual understanding and remedial efforts of student misconception. This study aims to see the impact of cognitive-based learning model in improving conceptual understanding and remediating student misconceptions. The research method used is Design / Develop Research. The product developed is a cognitive conflict-based learning model along with its components. This article reports on product design results, validity tests, and practicality test. The study resulted in the design of cognitive conflict-based learning model with 4 learning syntaxes, namely (1) preconception activation, (2) presentation of cognitive conflict, (3) discovery of concepts & equations, (4) Reflection. The results of validity tests by some experts on aspects of content, didactic, appearance or language, indicate very valid criteria. Product trial results also show a very practical product to use. Based on pretest and posttest results, cognitive conflict-based learning models have a good impact on improving conceptual understanding and remediating misconceptions, especially in high-ability students.
Validation of NASA Thermal Ice Protection Computer Codes. Part 3; The Validation of Antice
NASA Technical Reports Server (NTRS)
Al-Khalil, Kamel M.; Horvath, Charles; Miller, Dean R.; Wright, William B.
2001-01-01
An experimental program was generated by the Icing Technology Branch at NASA Glenn Research Center to validate two ice protection simulation codes: (1) LEWICE/Thermal for transient electrothermal de-icing and anti-icing simulations, and (2) ANTICE for steady state hot gas and electrothermal anti-icing simulations. An electrothermal ice protection system was designed and constructed integral to a 36 inch chord NACA0012 airfoil. The model was fully instrumented with thermo-couples, RTD'S, and heat flux gages. Tests were conducted at several icing environmental conditions during a two week period at the NASA Glenn Icing Research Tunnel. Experimental results of running-wet and evaporative cases were compared to the ANTICE computer code predictions and are presented in this paper.
Yu, Yong; Xiang, Ying
2011-01-01
The present study was the first attempt to test the reliability and validity of Herek's Attitudes Toward Lesbians and Gay Men Scale (ATLG; Herek, 1988) in the Chinese population. Participants (n = 2,391 for the field trials and n = 200 for test–retest reliability) were asked to complete the translated, slightly modified version of the ATLG. The resulting ATLG has a two-dimensional factor structure as well as good validity and reliability in the Chinese culture. ATLG scores followed distinct patterns according sex and level of education that were consistent with previous studies in other populations. The significance of these findings in Chinese culture is discussed. PMID:21294029
Validation of the SURE Program, phase 1
NASA Technical Reports Server (NTRS)
Dotson, Kelly J.
1987-01-01
Presented are the results of the first phase in the validation of the SURE (Semi-Markov Unreliability Range Evaluator) program. The SURE program gives lower and upper bounds on the death-state probabilities of a semi-Markov model. With these bounds, the reliability of a semi-Markov model of a fault-tolerant computer system can be analyzed. For the first phase in the validation, fifteen semi-Markov models were solved analytically for the exact death-state probabilities and these solutions compared to the corresponding bounds given by SURE. In every case, the SURE bounds covered the exact solution. The bounds, however, had a tendency to separate in cases where the recovery rate was slow or the fault arrival rate was fast.
Casper, T. A.; Meyer, W. H.; Jackson, G. L.; ...
2010-12-08
We are exploring characteristics of ITER startup scenarios in similarity experiments conducted on the DIII-D Tokamak. In these experiments, we have validated scenarios for the ITER current ramp up to full current and developed methods to control the plasma parameters to achieve stability. Predictive simulations of ITER startup using 2D free-boundary equilibrium and 1D transport codes rely on accurate estimates of the electron and ion temperature profiles that determine the electrical conductivity and pressure profiles during the current rise. Here we present results of validation studies that apply the transport model used by the ITER team to DIII-D discharge evolutionmore » and comparisons with data from our similarity experiments.« less
Results from SMAP Validation Experiments 2015 and 2016
NASA Astrophysics Data System (ADS)
Colliander, A.; Jackson, T. J.; Cosh, M. H.; Misra, S.; Crow, W.; Powers, J.; Wood, E. F.; Mohanty, B.; Judge, J.; Drewry, D.; McNairn, H.; Bullock, P.; Berg, A. A.; Magagi, R.; O'Neill, P. E.; Yueh, S. H.
2017-12-01
NASA's Soil Moisture Active Passive (SMAP) mission was launched in January 2015. The objective of the mission is global mapping of soil moisture and freeze/thaw state. Well-characterized sites with calibrated in situ soil moisture measurements are used to determine the quality of the soil moisture data products; these sites are designated as core validation sites (CVS). To support the CVS-based validation, airborne field experiments are used to provide high-fidelity validation data and to improve the SMAP retrieval algorithms. The SMAP project and NASA coordinated airborne field experiments at three CVS locations in 2015 and 2016. SMAP Validation Experiment 2015 (SMAPVEX15) was conducted around the Walnut Gulch CVS in Arizona in August, 2015. SMAPVEX16 was conducted at the South Fork CVS in Iowa and Carman CVS in Manitoba, Canada from May to August 2016. The airborne PALS (Passive Active L-band Sensor) instrument mapped all experiment areas several times resulting in 30 coincidental measurements with SMAP. The experiments included intensive ground sampling regime consisting of manual sampling and augmentation of the CVS soil moisture measurements with temporary networks of soil moisture sensors. Analyses using the data from these experiments have produced various results regarding the SMAP validation and related science questions. The SMAPVEX15 data set has been used for calibration of a hyper-resolution model for soil moisture product validation; development of a multi-scale parameterization approach for surface roughness, and validation of disaggregation of SMAP soil moisture with optical thermal signal. The SMAPVEX16 data set has been already used for studying the spatial upscaling within a pixel with highly heterogeneous soil texture distribution; for understanding the process of radiative transfer at plot scale in relation to field scale and SMAP footprint scale over highly heterogeneous vegetation distribution; for testing a data fusion based soil moisture downscaling approach; and for investigating soil moisture impact on estimation of vegetation fluorescence from airborne measurements. The presentation will describe the collected data and showcase some of the most important results achieved so far.
NASA Astrophysics Data System (ADS)
Allred, C. Jeff; Churchill, David; Buckner, Gregory D.
2017-07-01
This paper presents a novel approach to monitoring rotor blade flap, lead-lag and pitch using an embedded gyroscope and symmetrically mounted MEMS accelerometers. The central hypothesis is that differential accelerometer measurements are proportional only to blade motion; fuselage acceleration and blade bending are inherently compensated for. The inverse kinematic relationships (from blade position to acceleration and angular rate) are derived and simulated to validate this hypothesis. An algorithm to solve the forward kinematic relationships (from sensor measurement to blade position) is developed using these simulation results. This algorithm is experimentally validated using a prototype device. The experimental results justify continued development of this kinematic estimation approach.
Hydrogen Reduction of Lunar Regolith Simulants for Oxygen Production
NASA Technical Reports Server (NTRS)
Hegde, U.; Balasubramaniam, R.; Gokoglu, S. A.; Rogers, K.; Reddington, M.; Oryshchyn, L.
2011-01-01
Hydrogen reduction of the lunar regolith simulants JSC-1A and LHT-2M is investigated in this paper. Experiments conducted at NASA Johnson Space Center are described and are analyzed utilizing a previously validated model developed by the authors at NASA Glenn Research Center. The effects of regolith sintering and clumping, likely in actual production operations, on the oxygen production rate are studied. Interpretations of the obtained results on the basis of the validated model are provided and linked to increase in the effective particle size and reduction in the intra-particle species diffusion rates. Initial results on the pressure dependence of the oxygen production rate are also presented and discussed
Fixed gain and adaptive techniques for rotorcraft vibration control
NASA Technical Reports Server (NTRS)
Roy, R. H.; Saberi, H. A.; Walker, R. A.
1985-01-01
The results of an analysis effort performed to demonstrate the feasibility of employing approximate dynamical models and frequency shaped cost functional control law desgin techniques for helicopter vibration suppression are presented. Both fixed gain and adaptive control designs based on linear second order dynamical models were implemented in a detailed Rotor Systems Research Aircraft (RSRA) simulation to validate these active vibration suppression control laws. Approximate models of fuselage flexibility were included in the RSRA simulation in order to more accurately characterize the structural dynamics. The results for both the fixed gain and adaptive approaches are promising and provide a foundation for pursuing further validation in more extensive simulation studies and in wind tunnel and/or flight tests.
NASA Technical Reports Server (NTRS)
Nagaraja, K. S.; Kraft, R. H.
1999-01-01
The HSCT Flight Controls Group has developed longitudinal control laws, utilizing PTC aeroelastic flexible models to minimize aeroservoelastic interaction effects, for a number of flight conditions. The control law design process resulted in a higher order controller and utilized a large number of sensors distributed along the body for minimizing the flexibility effects. Processes were developed to implement these higher order control laws for performing the dynamic gust loads and flutter analyses. The processes and its validation were documented in Reference 2, for selected flight condition. The analytical results for additional flight conditions are presented in this document for further validation.
Yamaguti, M.; Muller, E.E.; Piffer, A.I.; Kich, J.D.; Klein, C.S.; Kuchiishi, S.S.
2008-01-01
Since Mycoplasma hyopneumoniae isolation in appropriate media is a difficult task and impractical for daily routine diagnostics, Nested-PCR (N-PCR) techniques are currently used to improve the direct diagnostic sensitivity of Swine Enzootic Pneumonia. In a first experiment, this paper describes a N-PCR technique optimization based on three variables: different sampling sites, sample transport media, and DNA extraction methods, using eight pigs. Based on the optimization results, a second experiment was conducted for testing validity using 40 animals. In conclusion, the obtained results of the N-PCR optimization and validation allow us to recommend this test as a routine monitoring diagnostic method for Mycoplasma hyopneumoniae infection in swine herds. PMID:24031248
de Alwis, Manudul Pahansen; Lo Martire, Riccardo; Äng, Björn O; Garme, Karl
2016-01-01
Background High-performance marine craft crews are susceptible to various adverse health conditions caused by multiple interactive factors. However, there are limited epidemiological data available for assessment of working conditions at sea. Although questionnaire surveys are widely used for identifying exposures, outcomes and associated risks with high accuracy levels, until now, no validated epidemiological tool exists for surveying occupational health and performance in these populations. Aim To develop and validate a web-based questionnaire for epidemiological assessment of occupational and individual risk exposure pertinent to the musculoskeletal health conditions and performance in high-performance marine craft populations. Method A questionnaire for investigating the association between work-related exposure, performance and health was initially developed by a consensus panel under four subdomains, viz. demography, lifestyle, work exposure and health and systematically validated by expert raters for content relevance and simplicity in three consecutive stages, each iteratively followed by a consensus panel revision. The item content validity index (I-CVI) was determined as the proportion of experts giving a rating of 3 or 4. The scale content validity index (S-CVI/Ave) was computed by averaging the I-CVIs for the assessment of the questionnaire as a tool. Finally, the questionnaire was pilot tested. Results The S-CVI/Ave increased from 0.89 to 0.96 for relevance and from 0.76 to 0.94 for simplicity, resulting in 36 items in the final questionnaire. The pilot test confirmed the feasibility of the questionnaire. Conclusions The present study shows that the web-based questionnaire fulfils previously published validity acceptance criteria and is therefore considered valid and feasible for the empirical surveying of epidemiological aspects among high-performance marine craft crews and similar populations. PMID:27324717
2006-10-01
Investigation of Item-Pair Presentation and Construct Validity of the Navy Computer Adaptive Personality Scales ( NCAPS ) Christina M. Underhill, Ph.D...Construct Validity of the Navy Computer Adaptive Personality Scales ( NCAPS ) Christina M. Underhill, Ph.D. Reviewed and Approved by Jacqueline A. Mottern...and Construct Validity of the Navy Computer Adaptive Personality Scales ( NCAPS ) 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 0602236N and 0603236N 6
Innstrand, Siw Tone; Christensen, Marit; Undebakke, Kirsti Godal; Svarva, Kyrre
2015-12-01
The aim of the present paper is to present and validate a Knowledge-Intensive Work Environment Survey Target (KIWEST), a questionnaire developed for assessing the psychosocial factors among people in knowledge-intensive work environments. The construct validity and reliability of the measurement model where tested on a representative sample of 3066 academic and administrative staff working at one of the largest universities in Norway. Confirmatory factor analysis provided initial support for the convergent validity and internal consistency of the 30 construct KIWEST measurement model. However, discriminant validity tests indicated that some of the constructs might overlap to some degree. Overall, the KIWEST measure showed promising psychometric properties as a psychosocial work environment measure. © 2015 the Nordic Societies of Public Health.
NASA Technical Reports Server (NTRS)
Emmons, L. K.; Pfister, G. G.; Edwards, D. P.; Gille, J. C.; Sachse, G.; Blake, D.; Wofsy, S.; Gerbig, C.; Matross, D.; Nedelec, P.
2007-01-01
Measurements of carbon monoxide (CO) made as part of three aircraft experiments during the summer of 2004 over North America have been used for the continued validation of the CO retrievals from the Measurements of Pollution in the Troposphere (MOPITT) instrument on board the Terra satellite. Vertical profiles measured during the NASA INTEX-A campaign, designed to be coincident with MOPITT overpasses, as well as measurements made during the COBRA-2004 and MOZAIC experiments, provided valuable validation comparisons. On average, the MOPITT CO retrievals are biased slightly high for these North America locations. While the mean bias differs between the different aircraft experiments (e.g., 7.0 ppbv for MOZAIC to 18.4 ppbv for COBRA at 700 hPa), the standard deviations are quite large, so the results for the three data sets can be considered consistent. On average, it is estimated that MOPITT is 7- 14% high at 700 hPa and 03% high at 350 hPa. These results are consistent with the validation results for the Carr, Colorado, Harvard Forest, Massachusetts, and Poker Flats, Alaska, aircraft profiles for "phase 2" presented by Emmons et al. (2004) and are generally within the design criteria of 10% accuracy.
[Validation of the Spanish version of the Frankfurt Emotion Work Scales].
Ortiz Bonnín, Silvia; Navarro Guzmán, Capilla; García Buades, Esther; Ramis Palmer, Carmen; Manassero Mas, M Antonia
2012-05-01
This study presents the validity and reliability analysis of a questionnaire that assesses emotion work in the service sector. Emotion work is a term introduced by Hochschild (1983) and it refers to the expression of organizationally desirable emotions to influence the interactions with clients at work. The results show a 6-factor structure: Requirement to display Positive, Negative and Neutral Emotions, Sensitivity Requirements, Interaction Control and Emotional Dissonance. The analysis of the sub-scale scores reveals that the most frequently expressed emotions are positive, whereas negative emotions are expressed less frequently.
ELISA: a cryocooled 10 GHz oscillator with 10(-15) frequency stability.
Grop, S; Bourgeois, P Y; Bazin, N; Kersalé, Y; Rubiola, E; Langham, C; Oxborrow, M; Clapton, D; Walker, S; De Vicente, J; Giordano, V
2010-02-01
This article reports the design, the breadboarding, and the validation of an ultrastable cryogenic sapphire oscillator operated in an autonomous cryocooler. The objective of this project was to demonstrate the feasibility of a frequency stability of 3x10(-15) between 1 and 1000 s for the European Space Agency deep space stations. This represents the lowest fractional frequency instability ever achieved with cryocoolers. The preliminary results presented in this paper validate the design we adopted for the sapphire resonator, the cold source, and the oscillator loop.
NASA Technical Reports Server (NTRS)
Richardson, Keith; Wong, Carla
1988-01-01
The role of verification and validation (V and V) in software has been to support and strengthen the software lifecycle and to ensure that the resultant code meets the standards of the requirements documents. Knowledge Based System (KBS) V and V should serve the same role, but the KBS lifecycle is ill-defined. The rationale of a simple form of the KBS lifecycle is presented, including accommodation to certain critical KBS differences from software development.
NASA Astrophysics Data System (ADS)
Farrell, Kathryn; Oden, J. Tinsley; Faghihi, Danial
2015-08-01
A general adaptive modeling algorithm for selection and validation of coarse-grained models of atomistic systems is presented. A Bayesian framework is developed to address uncertainties in parameters, data, and model selection. Algorithms for computing output sensitivities to parameter variances, model evidence and posterior model plausibilities for given data, and for computing what are referred to as Occam Categories in reference to a rough measure of model simplicity, make up components of the overall approach. Computational results are provided for representative applications.
Design and Experimental Validation of a USBL Underwater Acoustic Positioning System.
Reis, Joel; Morgado, Marco; Batista, Pedro; Oliveira, Paulo; Silvestre, Carlos
2016-09-14
This paper presents the steps for developing a low-cost POrtableNavigation Tool for Underwater Scenarios (PONTUS) to be used as a localization device for subsea targets. PONTUS consists of an integrated ultra-short baseline acoustic positioning system aided by an inertial navigation system. Built on a practical design, it can be mounted on an underwater robotic vehicle or be operated by a scuba diver. It also features a graphical user interface that provides information on the tracking of the designated target, in addition to some details on the physical properties inside PONTUS. A full disclosure of the architecture of the tool is first presented, followed by thorough technical descriptions of the hardware components ensemble and the software development process. A series of experiments was carried out to validate the developed prototype, and the results are presented herein, which allow assessing its overall performance.
Back to the Consideration of Future Consequences Scale: time to reconsider?
Rappange, David R; Brouwer, Werner B F; van Exel, N Job A
2009-10-01
The Consideration of Future Consequences (CFC) Scale is a measure of the extent to which individuals consider and are influenced by the distant outcomes of current behavior. In this study, the authors conducted factor analysis to investigate the factor structure of the 12-item CFC Scale. The authors found evidence for a multiple factor solution including one completely present-oriented factor consisting of all 7 present-oriented items, and one or two future-oriented factors consisting of the remaining future-oriented items. Further evidence indicated that the present-oriented factor and the 12-item CFC Scale perform similarly in terms of internal consistency and convergent validity. The structure and content of the future-oriented factor(s) is unclear. From the findings, the authors raise questions regarding the construct validity of the CFC Scale, the interpretation of its results, and the usefulness of the CFC scale in its current form in applied research.
Non-Market Values in a Cost-Benefit World: Evidence from a Choice Experiment.
Eppink, Florian V; Winden, Matthew; Wright, Will C C; Greenhalgh, Suzie
2016-01-01
In support of natural resource and ecosystem service policy, monetary value estimates are often presented to decision makers along with other types of information. There is some evidence that, presented with such 'mixed' information, people prioritise monetary over non-monetary information. We conduct a discrete choice experiment among New Zealand decision makers in which we manipulate the information presented to participants. We find that providing explicit monetary information strengthens the pursuit of economic benefits as well as the avoidance of environmental damage. Cultural impacts, of which we provided only qualitative descriptions, did not affect respondents' choices. Our study provides further evidence that concerns regarding the use of monetary information in decisions with complex, multi-value impacts are valid. Further research is needed to validate our results and find ways to reduce any bias in monetary and non-market information.
Design and Experimental Validation of a USBL Underwater Acoustic Positioning System
Reis, Joel; Morgado, Marco; Batista, Pedro; Oliveira, Paulo; Silvestre, Carlos
2016-01-01
This paper presents the steps for developing a low-cost POrtableNavigation Tool for Underwater Scenarios (PONTUS) to be used as a localization device for subsea targets. PONTUS consists of an integrated ultra-short baseline acoustic positioning system aided by an inertial navigation system. Built on a practical design, it can be mounted on an underwater robotic vehicle or be operated by a scuba diver. It also features a graphical user interface that provides information on the tracking of the designated target, in addition to some details on the physical properties inside PONTUS. A full disclosure of the architecture of the tool is first presented, followed by thorough technical descriptions of the hardware components ensemble and the software development process. A series of experiments was carried out to validate the developed prototype, and the results are presented herein, which allow assessing its overall performance. PMID:27649181