Looking at Yourself through Loving Eyes.

ERIC Educational Resources Information Center

Childers, John H., Jr.

1989-01-01

Introduces and discusses Neuro-Linquistic Programming (NLP) using "Looking at Yourself through Loving Eyes" technique. Presents the seven steps necessary in implementing this technique, and provides guidelines. Presents results suggesting that this technique is useful when working with elementary school students, and is a useful tool for…

Bayesian analysis of non-homogeneous Markov chains: application to mental health data.

PubMed

Sung, Minje; Soyer, Refik; Nhan, Nguyen

2007-07-10

In this paper we present a formal treatment of non-homogeneous Markov chains by introducing a hierarchical Bayesian framework. Our work is motivated by the analysis of correlated categorical data which arise in assessment of psychiatric treatment programs. In our development, we introduce a Markovian structure to describe the non-homogeneity of transition patterns. In doing so, we introduce a logistic regression set-up for Markov chains and incorporate covariates in our model. We present a Bayesian model using Markov chain Monte Carlo methods and develop inference procedures to address issues encountered in the analyses of data from psychiatric treatment programs. Our model and inference procedures are implemented to some real data from a psychiatric treatment study. Copyright 2006 John Wiley & Sons, Ltd.

Modeling of process of lifting power change of baker's yeast pressed depending on nature and quantity of introduced vegetable component

NASA Astrophysics Data System (ADS)

Belokurov, S. V.; Rodionova, N. S.; Belokurova, E. V.; Alexeeva, T. V.

2018-05-01

The work presents data on the effect of non-traditional powdered semi-finished products of plant origin: chokeberry, walnut partitions and sea buckthorn berries on the lifting power of baker's yeast. Various amounts of powdered semi-finished products of plant origin are introduced into the dough, directly at the stage of introducing the main components of the formulation, replacing them with some of the wheat flour. Studies have shown that the addition of small amounts of unconventional powdered plant-based semi-finished products (1 ... 5%) makes it possible to correct the lifting power of baking yeast, which, in consequence, affects the quality indicators of finished products. The paper presents a mathematical model of the change in the lift strength of baker's yeast, depending on the nature and amount of the powdered semi-finished product introduced.

Holistic Designs for Field Instruction in the Contemporary Social Work Curriculum.

ERIC Educational Resources Information Center

Skolnik, Louise; Papell, Catherine P.

1994-01-01

Two models for social work field instruction are presented, both introduced in a university-based laboratory setting. Both models attempt to integrate field practice with content of the holistic practice curriculum. They were derived from a holistic/multimethod assignment and a holistic/generalist orientation. Issues in field teaching are…

Educating Social Workers for Practice in Integrated Health Care: A Model Implemented in a Graduate Social Work Program

ERIC Educational Resources Information Center

Mattison, Debra; Weaver, Addie; Zebrack, Brad; Fischer, Dan; Dubin, Leslie

2017-01-01

This article introduces a curricular innovation, the Integrated Health Scholars Program (IHSP), developed to prepare master's-level social work students for practice in integrated health care settings, and presents preliminary findings related to students' self-reported program competencies and perceptions. IHSP, implemented in a…

Armed Forces VIEW (Vital Information for Education and Work).

ERIC Educational Resources Information Center

Cox, Walter H.; Zerface, W. A., Ed.

Armed Services VIEW (Vital Information for Education and Work) is described as a cooperative program with the Department of Defense which (1) introduces career opportunities and training available through volunteer service enlistment, (2) will be provided to senior high schools at no cost, and (3) presents materials in both printed and microfilm…

Electronics for Piezoelectric Smart Structures

NASA Technical Reports Server (NTRS)

Warkentin, D. J.; Tani, J.

1997-01-01

This paper briefly presents work addressing some of the basic considerations for the electronic components used in smart structures incorporating piezoelectric elements. After general remarks on the application of piezoelectric elements to the problem of structural vibration control, three main topics are described. Work to date on the development of techniques for embedding electronic components within structural parts is presented, followed by a description of the power flow and dissipation requirements of those components. Finally current work on the development of electronic circuits for use in an 'active wall' for acoustic noise is introduced.

Public Sculpture: America's Legacy. America Past and Present. Study Guide.

ERIC Educational Resources Information Center

Powe, Faye; Carter, Richard, Ed.

This guide presents public sculpture as an effective instructional tool, with the primary emphasis on works contributing to a sense of national or community identity. Sculptures are introduced according to the chronology of persons or events commemorated. The 10 lessons focus on United States history from the Civil War to the present. Unit 1:…

The Advantages of Hierarchical Linear Modeling. ERIC/AE Digest.

ERIC Educational Resources Information Center

Osborne, Jason W.

This digest introduces hierarchical data structure, describes how hierarchical models work, and presents three approaches to analyzing hierarchical data. Hierarchical, or nested data, present several problems for analysis. People or creatures that exist within hierarchies tend to be more similar to each other than people randomly sampled from the…

Possible quantum algorithm for the Lipshitz-Sarkar-Steenrod square for Khovanov homology

NASA Astrophysics Data System (ADS)

Ospina, Juan

2013-05-01

Recently the celebrated Khovanov Homology was introduced as a target for Topological Quantum Computation given that the Khovanov Homology provides a generalization of the Jones polynomal and then it is possible to think about of a generalization of the Aharonov.-Jones-Landau algorithm. Recently, Lipshitz and Sarkar introduced a space-level refinement of Khovanov homology. which is called Khovanov Homotopy. This refinement induces a Steenrod square operation Sq2 on Khovanov homology which they describe explicitly and then some computations of Sq2 were presented. Particularly, examples of links with identical integral Khovanov homology but with distinct Khovanov homotopy types were showed. In the presente work we will introduce possible quantum algorithms for the Lipshitz- Sarkar-Steenrod square for Khovanov Homolog and their possible simulations using computer algebra.

"Quality Circles": A Strategy for Personal and Curriculum Development. Coombe Lodge Working Paper. Information Bank Number 1803.

ERIC Educational Resources Information Center

Field, M. J.; Harrison, A. B.

Quality circles attempt to satisfy both task and personal needs through staff involvement in solving work-related problems. This paper summarizes quality circle theory, applies it to school settings, and suggests a framework for introducing the process to educational institutions. After briefly defining quality circles, the article presents two…

NASA's Research to Support the Airlines

NASA Technical Reports Server (NTRS)

Evans, Cody; Mogford, Richard; Wing, David; Stallmann, Summer L.

2017-01-01

NASA's working with airlines and industry partners to introduce innovative concepts and new technology. This presentation will describe some of the research efforts at NASA Ames and NASA Langley and discuss future projects and research in aviation.

Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 2-Domino Hazard Index and case study.

PubMed

Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

2008-12-15

The design of layout plans requires adequate assessment tools for the quantification of safety performance. The general focus of the present work is to introduce an inherent safety perspective at different points of the layout design process. In particular, index approaches for safety assessment and decision-making in the early stages of layout design are developed and discussed in this two-part contribution. Part 1 (accompanying paper) of the current work presents an integrated index approach for safety assessment of early plant layout. In the present paper (Part 2), an index for evaluation of the hazard related to the potential of domino effects is developed. The index considers the actual consequences of possible escalation scenarios and scores or ranks the subsequent accident propagation potential. The effects of inherent and passive protection measures are also assessed. The result is a rapid quantification of domino hazard potential that can provide substantial support for choices in the early stages of layout design. Additionally, a case study concerning selection among various layout options is presented and analyzed. The case study demonstrates the use and applicability of the indices developed in both parts of the current work and highlights the value of introducing inherent safety features early in layout design.

The Present Status of the Antigonish Movement in Nova Scotia.

ERIC Educational Resources Information Center

Sowder, Ellie Mae

A comprehensive case study is presented of the Antigonish Movement in eastern Nova Scotia. Originally founded to combat poverty and exploitation, it has functioned since 1929 under the extension department of St. Francis Xavier University, Antigonish. The Movement brought education into the lives of ordinary working people and introduced group…

Bullying: Description and Analysis of the Phenomenon

ERIC Educational Resources Information Center

Benitez, Juan Luis; Justicia, Fernando

2006-01-01

This article purports to present this Special Issue about Bullying and, at the same time, to introduce the phenomenon of bullying in order to facilitate readers an updated vision about the problem that will be worked from different perspectives by researchers from national and international scope. With this purpose, we present some controversial…

Lesson 6: Using the Checklist to Work through System Requirements

EPA Pesticide Factsheets

Lesson 6 describes how these same requirements are presented in the CROMERR System Checklist (which was introduced in Lesson 4). You may want to refer to the checklist as you step through this lesson.

Come In Spaceship Earth. Kids as Crew Members. Peace Works Series.

ERIC Educational Resources Information Center

Schmidt, Fran; Friedman, Alice

This program, for grades 4 through 12, introduces students to the concepts that result in cooperative work for the survival and improvement of the quality of life of the human family. In addition to the teacher's guide presented here, the program comes with a music video recorded in seven languages, reproducible pages, a class simulation game, and…

No Work Like Rework: Issues in the Design of a Math Test Sign-Up Application

ERIC Educational Resources Information Center

Alkadi, Ghassan; Beaubouef, Theresa

2012-01-01

This paper introduces a test sign-up application developed for a math department at a university. The requirements, design, and final software product are presented, along with one very important unexpected problem that arose after completion of the work--the system to be implemented and maintained by the client was not compatible with the…

The Establishment of School Social Work in Austria--From a Project to a Regular Offer

ERIC Educational Resources Information Center

Heimgartner, Arno; Sting, Stephan

2013-01-01

The contribution introduces the present situation and the basic challenges of school social work in Austria. Starting with the perception of a developing "knowledge society" (Höhne, 2004), school is seen as a life place at which social subjects and problems occur and are made manifest. The analyses are based in particular on empirical…

An Interval Type-2 Fuzzy Multiple Echelon Supply Chain Model

NASA Astrophysics Data System (ADS)

Miller, Simon; John, Robert

Planning resources for a supply chain is a major factor determining its success or failure. In this paper we build on previous work introducing an Interval Type-2 Fuzzy Logic model of a multiple echelon supply chain. It is believed that the additional degree of uncertainty provided by Interval Type-2 Fuzzy Logic will allow for better representation of the uncertainty and vagueness present in resource planning models. First, the subject of Supply Chain Management is introduced, then some background is given on related work using Type-1 Fuzzy Logic. A description of the Interval Type-2 Fuzzy model is given, and a test scenario detailed. A Genetic Algorithm uses the model to search for a near-optimal plan for the scenario. A discussion of the results follows, along with conclusions and details of intended further work.

Aesthetic Diagnosis in Gestalt Therapy †

PubMed Central

Roubal, Jan; Francesetti, Gianni; Gecele, Michela

2017-01-01

The diagnostic process in psychotherapy using the aesthetic evaluation is described in this article. Unlike the classical diagnostic process, which presents a result of comparing clinicians´ observations with a diagnostic system (DSM, ICD, etc.), the aesthetic evaluation is a pre-reflexive, embodied, and preverbal process. A Gestalt Therapy theoretical frame is used to introduce a concept of the aesthetic diagnostic process. During this process, the clinicians use their own here-and-now presence, which takes part in the co-creation of the shared relational field during the therapeutic session. A specific procedure of the aesthetic evaluation is introduced. The clinical work with depressed clients is presented to illustrate this perspective. PMID:29039752

Kinklike structures in models of the Dirac-Born-Infeld type

NASA Astrophysics Data System (ADS)

Bazeia, D.; Lima, Elisama E. M.; Losano, L.

2018-01-01

The present work investigates several models of a single real scalar field, engendering kinetic term of the Dirac-Born- Infeld type. Such theories introduce nonlinearities to the kinetic part of the Lagrangian, which presents a square root restricting the field evolution and including additional powers in derivatives of the scalar field, controlled by a real parameter. In order to obtain topological solutions analytically, we propose a first-order framework that simplifies the equation of motion ensuring solutions that are linearly stable. This is implemented using the deformation method, and we introduce examples presenting two categories of potentials, one having polynomial interactions and the other with nonpolynomial interactions. We also explore how the Dirac-Born-Infeld kinetic term affects the properties of the solutions. In particular, we note that the kinklike solutions are similar to the ones obtained through models with standard kinetic term and canonical potential, but their energy densities and stability potentials vary according to the parameter introduced to control the new models.

The Urban Dust Dome: A Demonstration Model

ERIC Educational Resources Information Center

Cross, Ralph D.

1973-01-01

Working plans for an inexpensive urban dust dome model are presented together with some generalizations about urban atmosphere pollution. Theories and principles of atmospheric pollution which are introduced can be made meaningful to elementary students through classroom use of this model. (SM)

Application of electrohydrodynamic phenomena to space processing

NASA Technical Reports Server (NTRS)

Jones, T. B.

1975-01-01

The capabilities of electrohydrodynamic (EHD) unit separation, liquid handling/control, and mixing are introduced to industrial chemists and metallurgists, working on specific zero-gravity processes. Previously proposed zero-gravity applications of EHD are presented along with the prominent electrohydrodynamical force effects.

Transport improvement, commuting costs, and residential location

NASA Technical Reports Server (NTRS)

Stucker, J. P.

1973-01-01

A theoretical framework for evaluating the effects of introducing new transportation on residential travel patterns is presented. Data are based on changes in residential location of urban commuters that alter the mode and length of work trips as well as economic factors.

[Validation of the Spanish version of the Frankfurt Emotion Work Scales].

PubMed

Ortiz Bonnín, Silvia; Navarro Guzmán, Capilla; García Buades, Esther; Ramis Palmer, Carmen; Manassero Mas, M Antonia

2012-05-01

This study presents the validity and reliability analysis of a questionnaire that assesses emotion work in the service sector. Emotion work is a term introduced by Hochschild (1983) and it refers to the expression of organizationally desirable emotions to influence the interactions with clients at work. The results show a 6-factor structure: Requirement to display Positive, Negative and Neutral Emotions, Sensitivity Requirements, Interaction Control and Emotional Dissonance. The analysis of the sub-scale scores reveals that the most frequently expressed emotions are positive, whereas negative emotions are expressed less frequently.

Ostwald ripening theory

NASA Technical Reports Server (NTRS)

Baird, J. K.

1986-01-01

The Ostwald-ripening theory is deduced and discussed starting from the fundamental principles such as Ising model concept, Mayer cluster expansion, Langer condensation point theory, Ginzburg-Landau free energy, Stillinger cutoff-pair potential, LSW-theory and MLSW-theory. Mathematical intricacies are reduced to an understanding version. Comparison of selected works, from 1949 to 1984, on solution of diffusion equation with and without sink/sources term(s) is presented. Kahlweit's 1980 work and Marqusee-Ross' 1954 work are more emphasized. Odijk and Lekkerkerker's 1985 work on rodlike macromolecules is introduced in order to simulate interested investigators.

Competitive Adsorption-Assisted Formation of One-Dimensional Cobalt Nanochains with High CO Hydrogenation Activity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liang, Xin; Ren, Zhibo; Zhu, Xiaolin

In the present work, cobalt nanochains have been successfully synthesized by a novel co assisted self-assembling formation strategy. A dramatic morphology transformation from cobalt nanoparticles to nanochains are observed when co molecules were introduced into the synthetic system. DFT calculations further confirm that competitive co-adsorbed co and oleylamine over the cobalt nanoparticles facilitates the formation of cobalt nanochains, which show higher co hydrogenation performance. The present work provides a new strategic and promising method for controllable synthesis of catalyst nanomaterials with the preferred surface structure and morphology.

Crew coordination concepts: Continental Airlines CRM training

NASA Technical Reports Server (NTRS)

Christian, Darryl; Morgan, Alice

1987-01-01

The outline of the crew coordination concepts at Continental airlines is: (1) Present relevant theory: Contained in a pre-work package and in lecture/discussion form during the work course, (2) Discuss case examples: Contained in the pre-work for study and use during the course; and (3) Simulate practice problems: Introduced during the course as the beginning of an ongoing process. These concepts which are designed to address the problem pilots have in understanding the interaction between situations and their own theories of practice are briefly discussed.

A Scale-Invariant Model of Statistical Mechanics and Modified Forms of the First and the Second Laws of Thermodynamics

NASA Technical Reports Server (NTRS)

Sohrab, Siavash H.; Pitch, Nancy (Technical Monitor)

1999-01-01

A scale-invariant statistical theory of fields is presented that leads to invariant definition of density, velocity, temperature, and pressure, The definition of Boltzmann constant is introduced as k(sub k) = m(sub k)v(sub k)c = 1.381 x 10(exp -23) J x K(exp -1), suggesting that the Kelvin absolute temperature scale is equivalent to a length scale. Two new state variables called the reversible heat Q(sub rev) = TS and the reversible work W(sub rev) = PV are introduced. The modified forms of the first and second law of thermodynamics are presented. The microscopic definition of heat (work) is presented as the kinetic energy due to the random (peculiar) translational, rotational, and pulsational motions. The Gibbs free energy of an element at scale Beta is identified as the total system energy at scale (Beta-1), thus leading to an invariant form of the first law of thermodynamics U(sub Beta) = Q(sub Beta) - W(sub Beta) +N(e3)U(sub Beta-1).

Executive and Perceptual Distraction in Visual Working Memory

PubMed Central

2017-01-01

The contents of visual working memory are likely to reflect the influence of both executive control resources and information present in the environment. We investigated whether executive attention is critical in the ability to exclude unwanted stimuli by introducing concurrent potentially distracting irrelevant items to a visual working memory paradigm, and manipulating executive load using simple or more demanding secondary verbal tasks. Across 7 experiments varying in presentation format, timing, stimulus set, and distractor number, we observed clear disruptive effects of executive load and visual distraction, but relatively minimal evidence supporting an interactive relationship between these factors. These findings are in line with recent evidence using delay-based interference, and suggest that different forms of attentional selection operate relatively independently in visual working memory. PMID:28414499

[Introducing computer units into the reception office as part of the Vrapce Psychiatric Hospital Information System].

PubMed

Majdancić, Zeljko; Jukić, Vlado; Bojić, Miroslav

2005-01-01

Computerized medical record has become a necessity today, because of both the amount of present-day medical data and the need of better handling and processing them. In more than 120 years of the Vrapce Psychiatric Hospital existence, the most important changes in the working concept of the reception office took place when computer technology was introduced into the routine use. The reception office of the Hospital is the vital place where administrative activities intersect with medical care for a patient presenting to the Hospital. The importance of this segment of the Hospital is emphasized by the fact that the reception office is in function and at patients' disposition round-the-clock, for 365 days a year, with great frequency of patients. The shift from the established way of registering medical data on patient admission in handwriting or, later, typescript, to computer recording was a challenging and demanding task (from the aspects of hardware, software, network, education) for the development team as well as for the physicians because it has changed the concept (logic of the working process) of previous way of collecting the data from the patient (history, status, diagnostic procedures, therapy, etc.). The success in the development and implementation of this project and the confirmation of its usefulness during the four-year practice at Vrapce Psychiatric Hospital are best illustrated by the fact that other psychiatric hospitals in Croatia have already introduced or are introducing it in their daily practice.

Youth Perspectives on Risk and Resiliency: A Case Study from Juiz De Fora, Brazil

ERIC Educational Resources Information Center

Morrison, Penelope; Nikolajski, Cara; Borrero, Sonya; Zickmund, Susan

2014-01-01

The present work seeks to contribute to studies of cross-cultural risk and resiliency by presenting results from qualitative research with adolescents attending programs for at-risk youth in Juiz de Fora, Brazil. In 1990, Brazil introduced the Child and Adolescent Act (ECA), a significant piece of legislation that has had a direct impact on how…

Vector critical points and generalized quasi-efficient solutions in nonsmooth multi-objective programming.

PubMed

Wang, Zhen; Li, Ru; Yu, Guolin

2017-01-01

In this work, several extended approximately invex vector-valued functions of higher order involving a generalized Jacobian are introduced, and some examples are presented to illustrate their existences. The notions of higher-order (weak) quasi-efficiency with respect to a function are proposed for a multi-objective programming. Under the introduced generalization of higher-order approximate invexities assumptions, we prove that the solutions of generalized vector variational-like inequalities in terms of the generalized Jacobian are the generalized quasi-efficient solutions of nonsmooth multi-objective programming problems. Moreover, the equivalent conditions are presented, namely, a vector critical point is a weakly quasi-efficient solution of higher order with respect to a function.

Explorations in Regional Variation: A Variational Pragmatic Perspective

ERIC Educational Resources Information Center

Barron, Anne

2015-01-01

The present article introduces the Special Issue entitled "A Variational Pragmatic Approach to Regional Variation in Language," a collection of papers which celebrates the work of Klaus P. Schneider (Rheinische Friedrich-Wilhelms-Universität Bonn, Germany) on the occasion of his 60th birthday.

Deviation from the mean in teaching uncertainties

NASA Astrophysics Data System (ADS)

Budini, N.; Giorgi, S.; Sarmiento, L. M.; Cámara, C.; Carreri, R.; Gómez Carrillo, S. C.

2017-07-01

In this work we present two simple and interactive web-based activities for introducing students to the concepts of uncertainties in measurements. These activities are based on the real-time construction of histograms from students measurements and their subsequent analysis through an active and dynamic approach.

Approximating a retarded-advanced differential equation that models human phonation

NASA Astrophysics Data System (ADS)

Teodoro, M. Filomena

2017-11-01

In [1, 2, 3] we have got the numerical solution of a linear mixed type functional differential equation (MTFDE) introduced initially in [4], considering the autonomous and non-autonomous case by collocation, least squares and finite element methods considering B-splines basis set. The present work introduces a numerical scheme using least squares method (LSM) and Gaussian basis functions to solve numerically a nonlinear mixed type equation with symmetric delay and advance which models human phonation. The preliminary results are promising. We obtain an accuracy comparable with the previous results.

Ice Skating: Special Olympics Sports Skills Instructional Program.

ERIC Educational Resources Information Center

Special Olympics, Inc., Washington, DC.

One of seven booklets on Special Olympics Sports Skills Instructional Programs, this guide presents teaching suggestions for ice skating coaches working with mentally retarded persons. An overview section introduces the sport and considers ideas for effective teaching. Goals, objectives, and benefits are considered along with information on…

Teaching Sustainability Analysis in Electrical Engineering Lab Courses

ERIC Educational Resources Information Center

Braun, D.

2010-01-01

Laboratory courses represent an incompletely tapped opportunity to teach sustainability concepts. This work introduces and evaluates a simple strategy used to teach sustainability concepts in electrical engineering laboratory courses. The technique would readily adapt to other disciplines. The paper presents assessment data and a wiki containing…

Preparing Students in Human Service Professions for Interdisciplinary Practice.

ERIC Educational Resources Information Center

Knauss, Linda K.; Kramer, Lisa G.; Linn, Margaret Inman; Silver, Paula T.; Soliman, Hussein H.; Wellmon, Robert H.

2003-01-01

Presents an evaluation pf a training model that introduces graduate students from the professions of clinical psychology, education, physical therapy, and social work to interdisciplinary practice. Results indicate that, when compared with a control group, students who participated in the training model exhibited significant differences in…

The History of the Study of Detonation

ERIC Educational Resources Information Center

Bulat, Pavel V.; Volkov, Konstantin N.

2016-01-01

In this article we reviewed the main concepts of detonative combustion. Concepts of slow and fast combustion, of detonation adiabat are introduced. Landmark works on experimental and semi-empirical detonation study are presented. We reviewed Chapman-Jouguet stationary detonation and spin detonation. Various mathematical model of detonation wave…

Asian Short Fiction. Asian Studies Instructional Module.

ERIC Educational Resources Information Center

Waugh, Susan

This curriculum outline introduces the components of a course which explores the genre of short novels, including works by twentieth-century Japanese and Chinese authors. First, the catalogue course description and required texts are presented, highlighting the instructor's historical introduction to the development of Western, Japanese, and…

MIT-MANUS: a workstation for manual therapy and training II

NASA Astrophysics Data System (ADS)

Hogan, Neville; Krebs, Hermano I.; Charnnarong, J.; Srikrishna, P.; Sharon, Andre

1993-03-01

This paper presents some recent work on the development of a workstation for teaching and therapy in manual and manipulative skills. The experimental workstation, MANUS, as well as the overall concept are described. State-of-the-art aspects of the workstation under development are introduced.

From Circle to Hyperbola in Taxicab Geometry

ERIC Educational Resources Information Center

Berger, Ruth I.

2015-01-01

This "Activity for Students" article presents a taxicab geometry problem that engages students in plotting points and observing surprising shapes and underlining reasons for the appearance of figures when working with street grids. With this activity, teachers can provide an extra challenge by writing additional problems introducing a…

The Power of Choice

ERIC Educational Resources Information Center

Bray, Wendy S.

2009-01-01

Achieving equity in elementary school mathematics instruction involves meeting a diverse range of student learning needs that are inevitably present in mixed-ability classrooms. An instructional strategy that the author has found useful in working toward equity in mathematics class is to introduce opportunities for students to learn to make good…

What is the Meaning of the Physical Magnitude `Work'?

NASA Astrophysics Data System (ADS)

Kanderakis, Nikos

2014-06-01

Usually, in physics textbooks, the physical magnitude `work' is introduced as the product of a force multiplied by its displacement, in relation to the transfer of energy. In other words, `work' is presented as an internal affair of physics theory, while its relation to the world of experience, that is its empirical meaning, is missing. On the other hand, in the history of its creation, `work' was a concept that had empirical meaning from the start. It was constructed by engineers to measure the work (labor) of motor engines, men, and animals. Very soon however this initial meaning seems to vanish. In this article, it will be looked at how `work' is presented in physics textbooks, what was its initial meaning in the history of its formulation, under what circumstances this initial meaning faded, and how elements from the history of its creation can be used in the classroom to teach it.

Why High School Students Learn So Little and What Can Be Done about It. Testimony, Subcommittee on Education and Health, U.S. Congress, October 1, 1987. Working Paper #88-01.

ERIC Educational Resources Information Center

Bishop, John

The testimony presented in this document outlines the productivity lag between the needs of companies and the students who will enter the work force that is evident today within the United States. Manufacturing companies are having difficulty as they try to introduce flexible manufacturing technology. A lack of skill in communication, mathematics,…

Getting WELL: Workforce Education & Lifelong Learning. Designs for Professional Education and Action Research To Improve the Education and Training of Underserved Youth and Adults. Final Report.

ERIC Educational Resources Information Center

Sticht, Thomas G.; And Others

This report focuses on work force education and lifelong learning as a newly emerging strategy for meeting many challenges of education and work in the 21st century. Chapter 1 introduces the concept, reviews the sociopolitical background to the strategy, and presents the rationale for a new type of professional, Workforce Education and Lifelong…

[work motivation -- assessment instruments and their relevance for medical care].

PubMed

Fiedler, Rolf G; Ranft, Andreas; Greitemann, Bernhard; Heuft, Gereon

2005-11-01

The relevance of work motivation for medical research and healthcare, in particular rehabilitation, is described. Four diagnostic instruments in the German language are introduced which can assess work motivation using a scale system: AVEM, JDS, LMI and FBTM. Their possible application and potential usage for the clinical area are discussed. Apart from the FBTM, none of these instruments can be directly used as a general instrument in a normal medical clinical setting. Finally, a current model for work motivation (compensatory model of work motivation and volition) is presented that contains basis concepts, which are judged as important for future research questions concerning the development of motivation diagnostic instruments.

In vitro study for laser gene transfer in BHK-21 fibroblast cell line

NASA Astrophysics Data System (ADS)

Abdel Aziz, M.; Salem, D. S.; Salama, M. S.; Badr, Y.

2009-02-01

Modifications to our previously introduced system for laser microbeam cell surgery were carried out in the present work to match animal cells. These modifications included: 1- Using other laser system that used before, Excimer laser with 193 and 308 nm wavelengths. The used laser here, is He-Cd with low power and 441.5 nm wavelength in the visible region. 2- Instead of using pulsed laser, we used here CW He-Cd chopped by electrical chopper, which is synchronized with the mechanical motion of the mobile stage with step 40 microns, according to cell dimensions to avoid puncturing the same cell twice. The advantages of the modified here laser setup for gene transfer is: it is less damaging to the sensitive animal cell which has thin cell membrane. The present work aimed to: 1- Design a modified laser microbeam cell surgery, applicable to animal cells, such as fibroblast cells 2- To examine the efficiency of such system. 3- To assure gene transfer and its expression in the used cells. 4- To evaluate the ultra damages produced from using the laser beam as a modality for gene transfer. On the other wards, to introduce: safe, efficient and less damaging modality for gene transfer in animal cells. To achieve these goals, we applied the introduced here home-made laser setup with its synchronized parameters to introduce pBK-CMV phagemid, containing LacZ and neomycin resistance (neor )genes into BHK-21 fibroblast cell line. The results of the present work showed that: 1- Our modified laser microbeam cell surgery setup proved to be useful and efficient tool for gene transfer into fibroblast cells. 2- The presence and expression of LacZ gene was achieved using histochemical LacZ assay. 3- Selection of G418 antibiotic sensitivity assay confirmed the presence and expression towards stability of neor gene with time. 4- Presence of LacZ and neor genes in the genomic DNA of transfected fibroblast cells was indicated using PCR analysis. 5- Transmission electron microscopy indicated that, no ultradamages or changes for cell; membrane, organilles or any component of transfected fibroblast cell as a result of using laser microbeam compared with control cell.

High genetic diversity and absence of founder effects in a worldwide aquatic invader.

PubMed

Lejeusne, Christophe; Saunier, Alice; Petit, Nicolas; Béguer, Mélanie; Otani, Michio; Carlton, James T; Rico, Ciro; Green, Andy J

2014-07-24

The introduced oriental shrimp Palaemon macrodactylus has recently become widespread in temperate estuaries worldwide. However, this recent worldwide spread outside of its native range arises after a previous introduction to the US Pacific coast, where it was restricted for more than 30 years. Using a phylogeographic approach, the present work investigates the genetic history of the invasion of this decapod worldwide. Japan acted as the main native source area for worldwide introduced populations, but other native areas (likely South Korea and China) may act as source populations as well. The recently introduced European and NW Atlantic populations result from colonization from both Japan and an unknown area of the native range, although colonization from the NE Pacific could not be ruled out. Most introduced populations had higher haplotypic diversity than most native populations. P. macrodactylus has a strong potential to become one of the most widespread introduced species and may become the dominant estuarine shrimp in Europe. The ecological and economic consequences of this invasion remain to be thoroughly evaluated.

Employment of individuals in the Social Security disability programs.

PubMed

O'Leary, Paul; Livermore, Gina A; Stapleton, David C

2011-01-01

The articles in this special issue present findings from research on the employment and work-related activities of individuals receiving benefits through the Social Security Disability Insurance and Supplemental Security Income programs, and on the factors that hinder their efforts to work at levels that lead to exiting the disability rolls. This article introduces the other articles, highlights their important findings, and discusses the implications for ongoing efforts to increase the earnings and self-sufficiency of these beneficiaries, such as the Ticket to Work program and the Benefit Offset National Demonstration.

Using Clustering Strategies for Creating Authority Files.

ERIC Educational Resources Information Center

French, James C.; Powell, Allison L.; Schulman, Eric

2000-01-01

Discussion of quality control of data in online bibliographic databases focuses on authority files. Describes approximate string matching, introduces the concept of approximate word matching and clustering, and presents a case study using the Astrophysics Data System (ADS) that shows how to reduce human effort involved in authority work. (LRW)

Beyond Superheroes and Advocacy: The Pathway of Teacher Leadership Development

ERIC Educational Resources Information Center

Smylie, Mark A.; Eckert, Jonathan

2018-01-01

This article introduces new perspectives, principles and recommendations for the successful development of teacher leadership. It draws from literature on teacher leadership, work redesign, and on-the-job leadership development to explore key insights and questions for teacher leadership development, and it presents a conceptual-theoretical model…

From Principles to Practice in Education for Intercultural Citizenship

ERIC Educational Resources Information Center

Byram, Michael, Ed.; Golubeva, Irina, Ed.; Hui, Han, Ed.; Wagner, Manuela, Ed.

2016-01-01

The contributors to this volume have collaborated to present their work on introducing competences in intercultural communication and citizenship into foreign language education. The book examines how learners and teachers think about citizenship and interculturality, and shows how teachers and researchers from primary to university education can…

Integrating Laboratory Activity into a Junior High School Classroom

ERIC Educational Resources Information Center

Shyr, Wen-Jye

2010-01-01

This paper presents a wind power system laboratory activity and an outline for evaluating student performance in this activity. The work described here was to design and implement the laboratory to assist teachers in achieving the teaching objective of this activity. The laboratory teaching activities introduce energy sources, wind energy…

Introduction: Optical trapping and applications feature issue

PubMed Central

López-Mariscal, Carlos; McGloin, David

2013-01-01

The editors introduce the Biomedical Optics Express feature issue on “Optical Trapping and Applications.” The works presented in the papers within this issue include were the focus of the third OTA Topical Meeting that was held on April 14–18, 2013, in Waikoloa, Hawaii. PMID:24298428

The Museum and the Gifted Child.

ERIC Educational Resources Information Center

Rogers, Karen B.

1985-01-01

The article presents questioning strategies that can be used when introducing gifted children to the art museum. The strategies utilize eight creative processes and seventeen content, process, and product modifications, based on the differentiation models of Frank Williams and June Maker. A single work of art is used and examples of questions…

Associative Mechanosensory Conditioning of the Proboscis Extension Reflex in Honeybees

ERIC Educational Resources Information Center

Giurfa, Martin; Malun, Dagmar

2004-01-01

The present work introduces a form of associative mechanosensory conditioning of the proboscis extension reflex (PER) in honeybees. In our paradigm, harnessed honeybees learn the elemental association between mechanosensory, antennal stimulation and a reward of sucrose solution delivered to the proboscis. Thereafter, bees extend their proboscis to…

Linking Decisions to Stakeholder Values in the Guanica Bay Watershed, Puerto Rico

EPA Science Inventory

This presentation lays the foundation for the session by introducing the Structured Decision-Making (SDM) approach that is being used by the Environmental Protection Agency (EPA) in the Guánica Bay watershed of southwestern Puerto Rico. EPA is working with other agencies i...

Career Engagement: Bridging Career Counseling and Employee Engagement

ERIC Educational Resources Information Center

Neault, Roberta A.; Pickerell, Deirdre A.

2011-01-01

In this article, the authors present a model of career engagement that helps bridge the gap between career counselors' focus on supporting individuals to find meaningful work and employers' desire for an engaged, productive, and committed workforce. They briefly review highlights of the employee engagement literature, introduce the Career…

Local Quark-Hadron Duality in Electron Scattering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wally Melnitchouk

2007-09-10

We present some recent developments in the study of quark-hadron duality in structure functions in the resonance region. To understand the workings of local duality we introduce the concept of truncated moments, which are used to describe the Q^2 dependence of specific resonance regions within a QCD framework.

Team Teaching at Upper Arlington School.

ERIC Educational Resources Information Center

Jackson, Annette R.

1968-01-01

Team teaching has been used for 4 years in the 10th-grade English classes at Upper Arlington High School near Columbus, Ohio. Units are prepared, presented, and evaluated by teachers working together voluntarily. A 6-day American literature unit introducing Romanticism has been particularly successful. The contrasts between Neoclassicism and…

Themed Space

ERIC Educational Resources Information Center

Lynch, Christopher O.

2010-01-01

This article presents a classroom activity that introduces students to the concept of themed space. Students learn to think critically about the spaces they encounter on a regular basis by analyzing existing spaces and by working in groups to create their own themed space. This exercise gives students the chance to see the relevance of critical…

Fire and forest meteorology

Treesearch

SA Ferguson; T.J. Brown; M. Flannigan

2005-01-01

The American Meteorological Society symposia series on Fire and Forest Meteorology provides biennial forums for atmospheric and fire scientists to introduce and discuss the latest and most relevant research on weather, climate and fire. This special issue highlights significant work that was presented at the Fifth Symposium in Orlando, Florida during 16-20 November...

Collective Action Competence: An Asset to Campus Sustainability

ERIC Educational Resources Information Center

Clark, Charlotte R.

2016-01-01

Purpose: The purpose of this paper is to operationalize theories of social learning and collective action for campus sustainability practitioners at higher education institutions (IHEs) to enhance their work, and to introduce the concept of collective action competence as a practical tool. Design/methodology/approach: This paper presents a…

Ethical considerations in revision rhinoplasty.

PubMed

Wayne, Ivan

2012-08-01

The problems that arise when reviewing another surgeon's work, the financial aspects of revision surgery, and the controversies that present in marketing and advertising will be explored. The technological advances of computer imaging and the Internet have introduced new problems that require our additional consideration. Copyright © 2012 by Thieme Medical Publishers, Inc.

Peace Education with Refugees: Case Studies

ERIC Educational Resources Information Center

Kyuchukov, Hristo; New, William

2016-01-01

The authors suggest the possibility of using concepts and practices drawn from peace education to assist in the treatment and education of refugees suffering from post-traumatic stress. They introduce four basic principles of peace education, which permit students/clients to work through memory and present conflicts, and calls on…

Three distinct pneumotypes characterize the microbiome of the lung in BALB/cJ mice.

PubMed

Scheiermann, Julia; Klinman, Dennis M

2017-01-01

Bacteria can rarely be isolated from normal healthy lungs using conventional culture techniques, supporting the traditional belief that the lungs are sterile. Yet recent studies using next generation sequencing report that bacterial DNA commonly found in the upper respiratory tract (URT) is present at lower levels in the lungs. Interpretation of that finding is complicated by the technical limitations and potential for contamination introduced when dealing with low biomass samples. The current work sought to overcome those limitations to clarify the number, type and source of bacteria present in the lungs of normal mice. Results showed that the oral microbiome is diverse and highly conserved whereas murine lung samples fall into three distinct patterns. 33% of the samples were sterile, as they lacked culturable bacteria and their bacterial DNA content did not differ from background. 9% of samples contained comparatively higher amounts of bacterial DNA whose composition mimicked that detected in the URT. A final group (58%) contained smaller amounts of microbial DNA whose composition was correlating to that of rodent chow and cage bedding, likely acquired by inspiration of food and bedding fragments. By analyzing each sample independently rather than working with group averages, this work eliminated the bias introduced by aspiration-contaminated samples to establish that three distinct microbiome pneumotypes are present in normal murine lungs.

An approach to detecting deliberately introduced defects and micro-defects in 3D printed objects

NASA Astrophysics Data System (ADS)

Straub, Jeremy

2017-05-01

In prior work, Zeltmann, et al. demonstrated the negative impact that can be created by defects of various sizes in 3D printed objects. These defects may make the object unsuitable for its application or even present a hazard, if the object is being used for a safety-critical application. With the uses of 3D printing proliferating and consumer access to printers increasing, the desire of a nefarious individual or group to subvert the desired printing quality and safety attributes of a printer or printed object must be considered. Several different approaches to subversion may exist. Attackers may physically impair the functionality of the printer or launch a cyber-attack. Detecting introduced defects, from either attack, is critical to maintaining public trust in 3D printed objects and the technology. This paper presents an alternate approach. It applies a quality assurance technology based on visible light sensing to this challenge and assesses its capability for detecting introduced defects of multiple sizes.

On certain subclasses of multivalent functions associated with an extended fractional differintegral operator

NASA Astrophysics Data System (ADS)

Patel, J.; Mishra, A. K.

2007-08-01

In the present paper an extended fractional differintegral operator , suitable for the study of multivalent functions is introduced. Various mapping properties and inclusion relationships between certain subclasses of multivalent functions are investigated by applying the techniques of differential subordination. Relevant connections of the definitions and results presented in this paper with those obtained in several earlier works on the subject are also pointed out.

Living the Good (Work) Life: Implications of General Values for Work Values

ERIC Educational Resources Information Center

Carlstrom, Aaron H.

2011-01-01

Advances in the understanding of general values from personality and social psychology apply to work values. In this paper, I introduce the concepts of values, value priorities, motivational goals, value types, and personal value systems used to clarify work values. I also introduce the terms basic and broad value and work value types. Second, I…

Research Update: Nanogenerators for self-powered autonomous wireless sensors

NASA Astrophysics Data System (ADS)

Khan, Usman; Hinchet, Ronan; Ryu, Hanjun; Kim, Sang-Woo

2017-07-01

Largely distributed networks of sensors based on the small electronics have great potential for health care, safety, and environmental monitoring. However, in order to have a maintenance free and sustainable operation, such wireless sensors have to be self-powered. Among various energies present in our environment, mechanical energy is widespread and can be harvested for powering the sensors. Piezoelectric and triboelectric nanogenerators (NGs) have been recently introduced for mechanical energy harvesting. Here we introduce the architecture and operational modes of self-powered autonomous wireless sensors. Thereafter, we review the piezoelectric and triboelectric NGs focusing on their working mechanism, structures, strategies, and materials.

Optimal pattern synthesis for speech recognition based on principal component analysis

NASA Astrophysics Data System (ADS)

Korsun, O. N.; Poliyev, A. V.

2018-02-01

The algorithm for building an optimal pattern for the purpose of automatic speech recognition, which increases the probability of correct recognition, is developed and presented in this work. The optimal pattern forming is based on the decomposition of an initial pattern to principal components, which enables to reduce the dimension of multi-parameter optimization problem. At the next step the training samples are introduced and the optimal estimates for principal components decomposition coefficients are obtained by a numeric parameter optimization algorithm. Finally, we consider the experiment results that show the improvement in speech recognition introduced by the proposed optimization algorithm.

Testing flight software on the ground: Introducing the hardware-in-the-loop simulation method to the Alpha Magnetic Spectrometer on the International Space Station

NASA Astrophysics Data System (ADS)

Sun, Wenhao; Cai, Xudong; Meng, Qiao

2016-04-01

Complex automatic protection functions are being added to the onboard software of the Alpha Magnetic Spectrometer. A hardware-in-the-loop simulation method has been introduced to overcome the difficulties of ground testing that are brought by hardware and environmental limitations. We invented a time-saving approach by reusing the flight data as the data source of the simulation system instead of mathematical models. This is easy to implement and it works efficiently. This paper presents the system framework, implementation details and some application examples.

[Present state and problems of work environment control in the workplaces using hazardous materials based on the Occupational Safety and Health Act in Japan].

PubMed

Hori, Hajime

2013-10-01

In Japan, working environment measurement is prescribed in the designated workplaces using hazardous materials. Measurements should be carried out periodically and countermeasures are performed depending on the results. By introducing such a system, working environments have remarkably improved. However, in the designated workplaces, measurements should be continued even in work environments found safe. On the other hand, measurement need not be obliged for non-designated workplaces even if hazardous materials are utilized.In the United States of America and many European countries, work environment management and work management are carried out by measuring personal exposure concentrations. In Japan, the Ministry of Health, Labour and Welfare is now discussing the introduction of personal exposure monitoring. However, many problems exist to prevent the simple introduction of American and European methods. This paper describes the brief history, present state and problems of work environment control in Japan, comparing with the systems of American and European countries.

A theory of viscoplasticity accounting for internal damage

NASA Technical Reports Server (NTRS)

Freed, A. D.; Robinson, D. N.

1988-01-01

A constitutive theory for use in structural and durability analyses of high temperature isotropic alloys is presented. Constitutive equations based upon a potential function are determined from conditions of stability and physical considerations. The theory is self-consistent; terms are not added in an ad hoc manner. It extends a proven viscoplastic model by introducing the Kachanov-Rabotnov concept of net stress. Material degradation and inelastic deformation are unified; they evolve simultaneously and interactively. Both isotropic hardening and material degradation evolve with dissipated work which is the sum of inelastic work and internal work. Internal work is a continuum measure of the stored free energy resulting from inelastic deformation.

Disaster Day! Integrating Speech Skills though Impromptu Group Research and Presentation

ERIC Educational Resources Information Center

Pruim, Douglas E.

2016-01-01

Courses: Disaster Day (DD) is a single-class activity designed for public speaking classrooms, but could also be applied to courses addressing small group communication. Objectives: DD integrates fundamental skills of the basic speech course, fosters participation through group work, and introduces new concepts and skills. By the end of the…

Education for Freedom? "Living Room Learning" and the Liberal Arts of Government

ERIC Educational Resources Information Center

McLean, Scott

2012-01-01

This article provokes critical reflection about the role of adult educators in contemporary processes of social control. It does so through presenting an empirical case study of an important liberal adult education program (Living Room Learning) and through introducing the work of British sociologist, Nikolas Rose. Rose's provocative ideas about…

CSMP Mathematics for Kindergarten, Teacher's Guide [and] Worksheets. Final Experimental Version.

ERIC Educational Resources Information Center

Vandeputte, Christiane

This guide represents the final experimental version of an extended pilot project which was conducted in the United States between 1973 and 1976. The manner of presentation and the pedagogical ideas and tools are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings…

Reflection--A Method for Organisational and Individual Development

ERIC Educational Resources Information Center

Randle, Hanne; Tilander, Kristian

2007-01-01

This paper presents how organisational development can be the results when politicians, managers, social workers and teaching staff take part in reflection. The results are based on a government-funded initiative in Sweden for lowering sick absenteeism. Three local governments introduced reflection as a strategy to combat work related stress and a…

Social Partners and Vocational Education in the Netherlands.

ERIC Educational Resources Information Center

van Dijk, Cor; And Others

This document on the links between the world of work and the world of vocational training in the Netherlands includes 5 chapters, a list of abbreviations, and a 42-item reference list. Chapter 1 introduces the report. Chapter 2 outlines the Dutch system of industrial relations and presents the concept of "neocorporatism." Chapter 3…

Dual Accelerometer Usage Strategy for Onboard Space Navigation

NASA Technical Reports Server (NTRS)

Zanetti, Renato; D'Souza, Chris

2012-01-01

This work introduces a dual accelerometer usage strategy for onboard space navigation. In the proposed algorithm the accelerometer is used to propagate the state when its value exceeds a threshold and it is used to estimate its errors otherwise. Numerical examples and comparison to other accelerometer usage schemes are presented to validate the proposed approach.

Intellectual Journeys in Faculty Development. Occasional Paper Number 14.

ERIC Educational Resources Information Center

Menges, Robert J., Ed.

A collection of six papers on faculty development concerns is presented. In "The Scholar-Practitioner Dilemma," Robert J. Menges notes the dual roles of scholarship and teaching that faculty members confront and introduces the topics that are addressed by the other authors. Attention is directed to the processes involved in intellectual work. In…

Youth as Media Art Designers: Workshops for Creative Coding

ERIC Educational Resources Information Center

Peppler, Kylie A.; Kafai, Yasmin B.

2008-01-01

We describe our efforts to bring media arts into design work with the goals to introduce new expressive forms in programming to urban youth. We're presenting the findings from a series of workshops organized together with professional media artists that focused on immersion, interaction, color and perspective using Scratch, a media-rich…

Pharmacology for the Psychotherapist.

ERIC Educational Resources Information Center

Goldenberg, Myron Michael

This book covers those areas of pharmacology that are of importance and interest to the psychotherapist. The 1st chapter introduces the various types of drugs. The 2nd chapter presents an overview of pharmacology and its principles. The 3rd chapter reviews aspects of the human body of importance to understanding the workings of psychotropic drugs.…

Fabrication and Characterization of Colloidal Crystal Thin Films

ERIC Educational Resources Information Center

Rodriguez, I.; Ramiro-Manzano, F.; Meseguer, F.; Bonet, E.

2011-01-01

We present a laboratory experiment that allows undergraduate or graduate students to get introduced to colloidal crystal research concepts in an interesting way. Moreover, such experiments and studies can also be useful in the field of crystallography or solid-state physics. The work concerns the growth of colloidal crystal thin films obtained…

Plate Tectonics: The Way the Earth Works. Teacher's Guide. LHS GEMS.

ERIC Educational Resources Information Center

Cuff, Kevin

This teacher guide presents a unit on plate tectonics and introduces hands-on activities for students in grades 6-8. In each unit, students act as real scientists and gather evidence by using science process skills such as observing, graphing, analyzing data, designing and making models, visualizing, communicating, theorizing, and drawing…

A Teaching Proposal for the Study of Eigenvectors and Eigenvalues

ERIC Educational Resources Information Center

Meneu, María José Beltrán; Murillo Arcila, Marina; Jordá Mora, Enrique

2017-01-01

In this work, we present a teaching proposal which emphasizes on visualization and physical applications in the study of eigenvectors and eigenvalues. These concepts are introduced using the notion of the moment of inertia of a rigid body and the GeoGebra software. The proposal was motivated after observing students' difficulties when treating…

Dramatic Prelude: Using Drama To Introduce Classic Literature to Young Readers.

ERIC Educational Resources Information Center

Winstead, Anita

1997-01-01

This paper describes the work done by a third-grade class to write and present adaptations of Dickens'"A Christmas Carol" and Shakespeare's "The Tempest." Students explored the authors' lives and collectively wrote their own renditions of the stories; the entire short text of their version of "The Tempest" is included. (PB)

Revealing the Invisible Hand: The Role of Teachers in Children's Peer Experiences

ERIC Educational Resources Information Center

Farmer, Thomas W.; Lines, Meghan McAuliffe; Hamm, Jill V.

2011-01-01

To introduce this special issue, the concept of the teacher as an ''invisible hand'' is presented as a metaphor to describe the potentially influential but relatively understudied contribution that educators are likely to have on children's peer relationships and their broader interpersonal growth. Building from conceptual work distinguishing…

Self-adaptive Solution Strategies

NASA Technical Reports Server (NTRS)

Padovan, J.

1984-01-01

The development of enhancements to current generation nonlinear finite element algorithms of the incremental Newton-Raphson type was overviewed. Work was introduced on alternative formulations which lead to improve algorithms that avoid the need for global level updating and inversion. To quantify the enhanced Newton-Raphson scheme and the new alternative algorithm, the results of several benchmarks are presented.

Cryptanalysis on a scheme to share information via employing a discrete algorithm to quantum states

NASA Astrophysics Data System (ADS)

Amellal, H.; Meslouhi, A.; El Baz, M.; Hassouni, Y.; El Allati, A.

2017-03-01

Recently, Yang and Hwang [Int. J. Theor. Phys. 53, 224 (2014)] demonstrated that the scheme to share information via employing discrete algorithm to quantum states presented by Kang and Fang [Commun. Theor. Phys. 55, 239 (2011)] suffers from a major vulnerability allowing an eavesdropper to perform a measurement and resend attack. By introducing an additional checking state framework, the authors have proposed an improved protocol to overcome this weakness. This work calls into question the invoked vulnerability in order to clarify a misinterpretation in the same protocol stages also introduce a possible leakage information strategy, known as a faked state attack, despite the proposed improvement, which means that the same security problem may persist. Finally, an upgrading technic was introduced in order to enhance the security transmission.

Introducing integrated product and process development into the education of science and engineering undergraduates: a lecture course with an accompanying case-study programme at the ETH chemistry department.

PubMed

Fenner, K; Jödicke, G; Alean-Kirkpatrick, P; Hungerbühler, K

2001-04-01

Increased quality requirements in the development of chemical products and a growing awareness within society of the activities of chemical companies present a new challenge to the education of young scientists. Nowadays, the teaching of chemists, chemical engineers and environmental scientists at universities has to go beyond the traditional, discipline-orientated knowledge acquisition. The students also have to learn to work and communicate in interdisciplinary teams, to solve application-oriented tasks and to integrate scientific, economical, ecological and social aspects into their work. For this reason, a case-study programme was launched at the chemistry department of the Swiss Federal Institute of Technology. In this paper, we describe the organisational aspects of the programme, its inclusion into academic and industrial environments and summarise some of the scientific methodologies applied. One of the seven case-studies, an assessment of a modern insecticide, is presented in more detail. Finally, we discuss how far the case-study programme is suitable for introducing a new mode of knowledge production to universities.

Program Model Checking as a New Trend

NASA Technical Reports Server (NTRS)

Havelund, Klaus; Visser, Willem; Clancy, Daniel (Technical Monitor)

2002-01-01

This paper introduces a special section of STTT (International Journal on Software Tools for Technology Transfer) containing a selection of papers that were presented at the 7th International SPIN workshop, Stanford, August 30 - September 1, 2000. The workshop was named SPIN Model Checking and Software Verification, with an emphasis on model checking of programs. The paper outlines the motivation for stressing software verification, rather than only design and model verification, by presenting the work done in the Automated Software Engineering group at NASA Ames Research Center within the last 5 years. This includes work in software model checking, testing like technologies and static analysis.

Shaft flexibility effects on aeroelastic stability of a rotating bladed disk

NASA Technical Reports Server (NTRS)

Khader, Naim; Loewy, Robert

1989-01-01

A comprehensive study of Coriolis forces and shaft flexibility effects on the structural dynamics and aeroelastic stability of a rotating bladed-disk assembly attached to a cantilever, massless, flexible shaft is presented. Analyses were performed for an actual bladed-disk assembly, used as the first stage in the fan of the 'E3' engine. In the structural model, both in-plane and out-of-plane elastic deformation of the bladed-disk assembly were considered relative to their hub, in addition to rigid disk translations and rotations introduced by shaft flexibility. Besides structural coupling between blades (through the flexible disk), additional coupling is introduced through quasisteady aerodynamic loads. Rotational effects are accounted for throughout the work, and some mode shapes for the whole structure are presented at a selected rpm.

Unified theory of effective interaction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takayanagi, Kazuo, E-mail: k-takaya@sophia.ac.jp

2016-09-15

We present a unified description of effective interaction theories in both algebraic and graphic representations. In our previous work, we have presented the Rayleigh–Schrödinger and Bloch perturbation theories in a unified fashion by introducing the main frame expansion of the effective interaction. In this work, we start also from the main frame expansion, and present various nonperturbative theories in a coherent manner, which include generalizations of the Brandow, Brillouin–Wigner, and Bloch–Horowitz theories on the formal side, and the extended Krenciglowa–Kuo and the extended Lee–Suzuki methods on the practical side. We thus establish a coherent and comprehensive description of both perturbativemore » and nonperturbative theories on the basis of the main frame expansion.« less

Infinity Computer and Calculus

NASA Astrophysics Data System (ADS)

Sergeyev, Yaroslav D.

2007-09-01

Traditional computers work with finite numbers. Situations where the usage of infinite or infinitesimal quantities is required are studied mainly theoretically. In this survey talk, a new computational methodology (that is not related to nonstandard analysis) is described. It is based on the principle `The part is less than the whole' applied to all numbers (finite, infinite, and infinitesimal) and to all sets and processes (finite and infinite). It is shown that it becomes possible to write down finite, infinite, and infinitesimal numbers by a finite number of symbols as particular cases of a unique framework. The new methodology allows us to introduce the Infinity Computer working with all these numbers (its simulator is presented during the lecture). The new computational paradigm both gives possibilities to execute computations of a new type and simplifies fields of mathematics where infinity and/or infinitesimals are encountered. Numerous examples of the usage of the introduced computational tools are given during the lecture.

LDV measurement of small nonlinearities in flat and curved membranes. A model for eardrum nonlinear acoustic behaviour

NASA Astrophysics Data System (ADS)

Kilian, Gladiné; Pieter, Muyshondt; Joris, Dirckx

2016-06-01

Laser Doppler Vibrometry is an intrinsic highly linear measurement technique which makes it a great tool to measure extremely small nonlinearities in the vibration response of a system. Although the measurement technique is highly linear, other components in the experimental setup may introduce nonlinearities. An important source of artificially introduced nonlinearities is the speaker, which generates the stimulus. In this work, two correction methods to remove the effects of stimulus nonlinearity are investigated. Both correction methods were found to give similar results but have different pros and cons. The aim of this work is to investigate the importance of the conical shape of the eardrum as a source of nonlinearity in hearing. We present measurements on flat and indented membranes. The data shows that the curved membrane exhibit slightly higher levels of nonlinearity compared to the flat membrane.

Energy saving and consumption reducing evaluation of thermal power plant

NASA Astrophysics Data System (ADS)

Tan, Xiu; Han, Miaomiao

2018-03-01

At present, energy saving and consumption reduction require energy saving and consumption reduction measures for thermal power plant, establishing an evaluation system for energy conservation and consumption reduction is instructive for the whole energy saving work of thermal power plant. By analysing the existing evaluation system of energy conservation and consumption reduction, this paper points out that in addition to the technical indicators of power plant, market activities should also be introduced in the evaluation of energy saving and consumption reduction in power plant. Ttherefore, a new evaluation index of energy saving and consumption reduction is set up and the example power plant is calculated in this paper. Rresults show that after introducing the new evaluation index of energy saving and consumption reduction, the energy saving effect of the power plant can be judged more comprehensively, so as to better guide the work of energy saving and consumption reduction in power plant.

Stochastic dynamics for idiotypic immune networks

NASA Astrophysics Data System (ADS)

Barra, Adriano; Agliari, Elena

2010-12-01

In this work we introduce and analyze the stochastic dynamics obeyed by a model of an immune network recently introduced by the authors. We develop Fokker-Planck equations for the single lymphocyte behavior and coarse grained Langevin schemes for the averaged clone behavior. After showing agreement with real systems (as a short path Jerne cascade), we suggest, both with analytical and numerical arguments, explanations for the generation of (metastable) memory cells, improvement of the secondary response (both in the quality and quantity) and bell shaped modulation against infections as a natural behavior. The whole emerges from the model without being postulated a-priori as it often occurs in second generation immune networks: so the aim of the work is to present some out-of-equilibrium features of this model and to highlight mechanisms which can replace a-priori assumptions in view of further detailed analysis in theoretical systemic immunology.

Cognition-based development and evaluation of ergonomic user interfaces for medical image processing and archiving systems.

PubMed

Demiris, A M; Meinzer, H P

1997-01-01

Whether or not a computerized system enhances the conditions of work in the application domain, very much demands on the user interface. Graphical user interfaces seem to attract the interest of the users but mostly ignore some basic rules of visual information processing thus leading to systems which are difficult to use, lowering productivity and increasing working stress (cognitive and work load). In this work we present some fundamental ergonomic considerations and their application to the medical image processing and archiving domain. We introduce the extensions to an existing concept needed to control and guide the development of GUIs with respect to domain specific ergonomics. The suggested concept, called Model-View-Controller Constraints (MVCC), can be used to programmatically implement ergonomic constraints, and thus has some advantages over written style guides. We conclude with the presentation of existing norms and methods to evaluate user interfaces.

Visualisation and interaction design solutions to address specific demands in shared home care.

PubMed

Scandurra, Isabella; Hägglund, Maria; Koch, Sabine

2006-01-01

When care professionals from different organisations are involved in patient care, their different views on the care process may not be meaningfully integrated. To use visualisation and interaction design solutions addressing the specific demands of shared care in order to support a collaborative work process. Participatory design, comprising interdisciplinary seminar series with real users and iterative prototyping, was applied. A set of interaction and visualisation design solutions to address care professionals' requirements in shared home care is presented, introducing support for identifying origin of information, holistic presentation of information, user group specific visualisation, avoiding cognitive overload, coordination of work and planning, and quick overviews. The design solutions are implemented in an integrated virtual health record system supporting cooperation and coordination in shared home care for the elderly. The described requirements are, however, generalized to comprise all shared care work. The presented design considerations allow healthcare professionals in different organizations to share patient data on mobile devices. Visualization and interaction design facilitates specific work situations and assists in handling specific demands in shared care. The user interface is adapted to different user groups with similar yet distinct needs. Consequently different views supporting cooperative work and presenting shared information in holistic overviews are developed.

Integrating Teacher- and Peer-Assessments of Group Coursework Assignments in Business Education: Some Innovative Methods

ERIC Educational Resources Information Center

Onyia, Okey Peter

2014-01-01

This paper is a sequel to an earlier one that examines "the efficacy of two innovative peer-assessment templates ("PET" and "PACT") introduced to enable students provide evidence of their fairness in evaluating peer contributions to group project work" (Onyia, O. P. and Allen, S., 2012). In the present paper, three…

Introducing Stochastic Simulation of Chemical Reactions Using the Gillespie Algorithm and MATLAB: Revisited and Augmented

ERIC Educational Resources Information Center

Argoti, A.; Fan, L. T.; Cruz, J.; Chou, S. T.

2008-01-01

The stochastic simulation of chemical reactions, specifically, a simple reversible chemical reaction obeying the first-order, i.e., linear, rate law, has been presented by Martinez-Urreaga and his collaborators in this journal. The current contribution is intended to complement and augment their work in two aspects. First, the simple reversible…

Foreword

NASA Astrophysics Data System (ADS)

Derrida, Bernard; Gaspard, Pierre; Van den Broeck, Christian

2007-06-01

We introduce and present the proceedings of the conference "Work, dissipation, and fluctuations in nonequilibrium physics" held in Brussels, 22-25 March 2006 under the auspices of the International Solvay Institutes for Physics and Chemistry and organized by the Center for Nonlinear Phenomena and Complex Systems of the Université Libre de Bruxelles. To cite this article: B. Derrida et al., C. R. Physique 8 (2007).

Analysis of Calibration Errors for Both Short and Long Stroke White Light Experiments

NASA Technical Reports Server (NTRS)

Pan, Xaiopei

2006-01-01

This work will analyze focusing and tilt variations introduced by thermal changes in calibration processes. In particular the accuracy limits are presented for common short- and long-stroke experiments. A new, simple, practical calibration scheme is proposed and analyzed based on the SIM PlanetQuest's Micro-Arcsecond Metrology (MAM) testbed experiments.

Working with Families Living with Autism: Potential Contributions of Marriage and Family Therapists

ERIC Educational Resources Information Center

Neely, Jason; Amatea, Ellen S.; Echevarria-Doan, Silvia; Tannen, Tina

2012-01-01

This article introduces marriage and family therapists (MFT) to some of the common issues faced by families that have a child with autism spectrum disorder (ASD). First, autism is defined and common myths surrounding it are discussed. Next, relational challenges are presented that families report experiencing during early childhood through the…

Internationalisation in Higher Education and Its Impact in Multilingual Contexts: Redefining Identities of Basque-Speaking Academics

ERIC Educational Resources Information Center

Larrinaga, Ane; Amurrio, Mila

2015-01-01

This article analyses aspects of the impact of internationalisation in higher education in multilingual contexts where both a state language and a minority language are present and where English is gradually being introduced. The analysis focuses primarily on the consequences for the professional identities of academics who work in a minority…

A conceptual framework for ranking crown fire potential in wildland fuelbeds.

Treesearch

Mark D. Schaaf; David V. Sandberg; Maarten D. Schreuder; Cynthia L. Riccardi

2007-01-01

This paper presents a conceptual framework for ranking the crown fire potential of wildland fuelbeds with forest canopies. This approach extends the work by Van Wagner and Rothermel, and introduces several new physical concepts to the modeling of crown fire behavior derived from the reformulated Rothemel surface fire modeling concepts proposed by Sandberg et al. This...

Stokely Carmichael: The Story of Black Power.

ERIC Educational Resources Information Center

Johnson, Jacqueline

This biography for younger readers presents the life of Stokely Carmichael, who made famous the phrase "Black Power" as he fought for the rights of black people in the United States and who later settled in Africa, where he organizes young Africans to work for their rights. The book is introduced by an overview of the civil rights…

CSMP Mathematics for the First Grade Part II, Teacher's Guide [and] Worksheets. Final Experimental Version.

ERIC Educational Resources Information Center

Saunders, Kevin; Schweitzer, Janis

This Teacher's Guide for first-grade mathematics is an outgrowth of an extended pilot project conducted nationwide between 1973 and 1976. The manner of presentation and the pedagogical ideas and tools are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings ("papygrams") and…

CSMP Mathematics for the First Grade Part I, Teacher's Guide [and] Worksheets. Final Experimental Version.

ERIC Educational Resources Information Center

Saunders, Kevin; And Others

This Teacher's Guide for first-grade mathematics is an outgrowth of an extended pilot project conducted nationwide between 1973 and 1976. The manner of presentation and the pedagogical ideas and tools are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings ("papygrams") and…

Online Library Accessibility Support: A Case Study within the Open University Library

ERIC Educational Resources Information Center

Mears, Wendy; Clough, Helen

2015-01-01

The Open University (OU) is the UK's largest distance education provider and has a large and growing disabled student population. Disabled user support presents particular challenges for an online library service in the distance learning environment. The OU introduced guidelines for working with non-OU--authored content (external content) in 2011…

Ground-based Search of Earth-mass Exoplanets using Transit-Timing Variations

NASA Astrophysics Data System (ADS)

Fernandez, J. M.

2010-10-01

This work presents recent results from a ground-based transit follow-up program of the extrasolar planet XO-2b in order to find Earth-mass companions. It also introduces the future use of the MONET 1m-class robotic telescopes as part of the effort to overcome the difficulties of this kind of project.

Microgravity Polymers

NASA Technical Reports Server (NTRS)

1986-01-01

A one-day, interactive workshop considering the effects of gravity on polymer materials science was held in Cleveland, Ohio, on May 9, 1985. Selected programmatic and technical issues were reviewed to introduce the field to workshop participants. Parallel discussions were conducted in three disciplinary working groups: polymer chemistry, polymer physics, and polymer engineering. This proceedings presents summaries of the workshop discussions and conclusions.

Introducing the New Social History into the Classroom: The Minnesota Social History Project.

ERIC Educational Resources Information Center

Crozier, William L.; Wozniak, John S.

1981-01-01

Describes the Minnesota Social History Project, which is based on the premise that history can be better taught and more actively learned if students use the experiences of the people of a local community as a reflection of the national experience. Information is presented on data collection and analysis, working with census materials, and…

Characterizing the Use of Mathematical Knowledge in Boundary-Crossing Situations at Work

ERIC Educational Resources Information Center

Kent, Phillip; Noss, Richard; Guile, David; Hoyles, Celia; Bakker, Arthur

2007-01-01

The first aim of this article is to present a characterization of the techno-mathematical literacies needed for effective practice in modern, technology-rich workplaces that are both highly automated and increasingly focused on flexible response to customer needs. The second aim is to introduce an epistemological dimension to activity theory,…

Enhancing Listening Comprehension through a Group Work Guessing Game

ERIC Educational Resources Information Center

Baleghizadeh, Sasan; Arabtabar, Fatemeh

2010-01-01

The present paper is an attempt to introduce an innovative technique for a more effective teaching of L2 listening comprehension through a process-oriented approach. Much of what is traditionally known as listening practice is in fact testing material in which students are required to listen to a recording and answer a number of comprehension…

CD-ROM Multimodal Affordances: Classroom Interaction Perspectives in the Malaysian English Literacy Hour

ERIC Educational Resources Information Center

Gardner, Sheena; Yaacob, Aizan

2009-01-01

CD-ROM affordances are explored in this article through participation in classroom interaction. CD-ROMs for shared reading of animated stories and language work were introduced to all Malaysian primary schools in 2003 for the Year 1 English Literacy Hour. We present classroom interaction extracts that show how the same CD-ROMs offer different…

Disclosure Day on Relativity: A Science Activity beyond the Classroom

ERIC Educational Resources Information Center

Aragoneses, Andres; Salan, M. Nuria; Hernandez-Fernandez, Antonio

2017-01-01

An important goal for students in engineering education is the ability to present and defend a project in front of a technical audience. We have designed an activity for helping students to work the independent learning and communication skills, while they are introduced in the dynamics of a conference. In this activity, students prepare and…

Phasor Analysis of Binary Diffraction Gratings with Different Fill Factors

ERIC Educational Resources Information Center

Martinez, Antonio; Sanchez-Lopez, Ma del Mar; Moreno, Ignacio

2007-01-01

In this work, we present a simple analysis of binary diffraction gratings with different slit widths relative to the grating period. The analysis is based on a simple phasor technique directly derived from the Huygens principle. By introducing a slit phasor and a grating phasor, the intensity of the diffracted orders and the grating's resolving…

A Chican@ Pathways Model of "Acción": Affirming the Racial, Cultural and Academic Assets of Students, Families and Communities

ERIC Educational Resources Information Center

Alemán, Enrique, Jr.; Delgado Bernal, Dolores; Cortez, Eden

2015-01-01

This article presents our conceptualization, initial creation and implementation of a university-school-community partnership, the Westside Pathways Project. We introduce our work in developing and sustaining this K-16 educational pathways partnership as one way of broadening the affirmative action discussion. By describing a model of…

Sorting: Groups and Graphs. Used Numbers. Grades 2-3.

ERIC Educational Resources Information Center

Russell, Susan Jo; Corwin, Rebecca B.

A unit of study that introduces sorting and classification as a way of organizing data is presented. Suitable for students in grades 2 and 3, it provides a foundation for further work in statistics and data analysis. The investigations may extend from one to five class sessions and are grouped into three parts: "Introduction to Sorting"; "Sorting…

Solar Energy Education. Humanities: activities and teacher's guide. Field test edition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1982-01-01

Activities are outlined to introduce students to information on solar energy while performing ordinary classroom work. In this teaching manual solar energy is integrated with the humanities. The activities include such things as stories, newspapers, writing assignments, and art and musical presentations all filled with energy related terms. An energy glossary is provided. (BCS)

A Single Reaction Thread Ties Multiple Core Concepts in an Introductory Chemistry Course

ERIC Educational Resources Information Center

Barbee, Meredith H.; Carden, Robert G.; Johnson, Julia H. R.; Brown, Cameron L.; Canelas, Dorian A.; Craig, Stephen L.

2018-01-01

This work describes the use of a single chemical reaction to teach and connect a number of standard general chemistry course topics while also introducing students to polymer concepts. Through the study of the reaction that converts spiropyran into merocyanine, we are able to present and connect molecular orbital theory, quantum mechanics,…

Case study - human body relay race.

PubMed

Lewis, Heather

2017-04-01

This case presentation introduces the work of Heather Lewis, Graphic Designer from Birmingham Community Healthcare Foundation Trust, Clinical Illustration department. The graphic design team offer professional design solutions in a variety of formats such as scientific posters, banners, patient information booklets and promotional items. This particular project was requested by the Combined Community Dental Service, a Specialist Division in Birmingham.

Designing Computer-Supported Collaborative Learning at Work for Rural It Workers: Learning Ensembles and Geographic Isolation

ERIC Educational Resources Information Center

Goggins, Sean P.

2014-01-01

This paper presents the results of a 9-month ethnographic and action research study of rural technology workers where computer support for collaborative learning through workplace technologies was introduced to a US-based technology firm. Throughout the implementation of this support and participation, issues related to geographic isolation are…

From Narratives to Numbers: Data Work and Patient-Generated Health Data in Consultations.

PubMed

Lindroth, Tomas; Islind, Anna Sigridur; Steineck, Gunnar; Lundin, Johan

2018-01-01

This article presents preliminary findings on how the introduction of patient-generated health data (PGHD) triggers changes during patient-nurse consultations. This article builds on a two-year case study, examining the work practice at a cancer rehabilitation clinic at a Swedish Hospital using PGHD. The study focuses on how nurses' use data, gathered by patients with a mobile phone app, during consultations. The use of PGHD introduce a change in the translation work, the work of turning rich patient descriptions and transform them into data, during the consultation for documentation and clinical decision-making. This change affects precision, questions asked and the use of visualizations as well as the patient-nurse decision making.

Information granules in image histogram analysis.

PubMed

Wieclawek, Wojciech

2018-04-01

A concept of granular computing employed in intensity-based image enhancement is discussed. First, a weighted granular computing idea is introduced. Then, the implementation of this term in the image processing area is presented. Finally, multidimensional granular histogram analysis is introduced. The proposed approach is dedicated to digital images, especially to medical images acquired by Computed Tomography (CT). As the histogram equalization approach, this method is based on image histogram analysis. Yet, unlike the histogram equalization technique, it works on a selected range of the pixel intensity and is controlled by two parameters. Performance is tested on anonymous clinical CT series. Copyright © 2017 Elsevier Ltd. All rights reserved.

The moderating influence of procedural fairness on the relationship between work-life conflict and organizational commitment.

PubMed

Siegel, Phyllis A; Post, Corinne; Brockner, Joel; Fishman, Ariel Y; Garden, Charlee

2005-01-01

To help employees better manage work-life conflict, organizations have introduced various initiatives, which have met with mixed results. The present studies examined the utility of a procedurally based approach to understanding employees' reactions to work-life conflict. The authors examined whether the fairness of procedures used by organizational authorities to plan and implement decisions moderates the (inverse) relationship between work-life conflict and employees' organizational commitment. Three studies using different methodologies showed support for the moderating role played by procedural fairness. That is, the tendency for greater work-life conflict to lead to lower commitment was significantly less pronounced when procedural fairness was high rather than low. Theoretical contributions to the work-life conflict and organizational justice literatures are discussed, as are practical implications.

International Approaches in Human Rights Education

NASA Astrophysics Data System (ADS)

Lohrenscheit, Claudia

2002-07-01

This paper was presented at a working group on Human Rights Education (HRE), organised by Volker Lenhart and Christel Adick, as part of the biennial conference of the German Society for Educational Research (DGfE), held in 2000 in Göttingen. In the spirit of the United Nations Decade for Human Rights Education (1995-2004) it contributes to the global discourse about HRE by summarising its foundations in international declarations and conventions, by discussing some examples for diverse approaches and conceptions of HRE and, finally by introducing some major obstacles or problems. The paper is part of the author's PhD project in the field of HRE and presents only an interim résumé of her recent work.

Overview of Piezoelectric Biosensors, Immunosensors and DNA Sensors and Their Applications.

PubMed

Pohanka, Miroslav

2018-03-19

Piezoelectric biosensors are a group of analytical devices working on a principle of affinity interaction recording. A piezoelectric platform or piezoelectric crystal is a sensor part working on the principle of oscillations change due to a mass bound on the piezoelectric crystal surface. In this review, biosensors having their surface modified with an antibody or antigen, with a molecularly imprinted polymer, with genetic information like single stranded DNA, and biosensors with bound receptors of organic of biochemical origin, are presented and discussed. The mentioned recognition parts are frequently combined with use of nanoparticles and applications in this way are also introduced. An overview of the current literature is given and the methods presented are commented upon.

3D printing cybersecurity: detecting and preventing attacks that seek to weaken a printed object by changing fill level

NASA Astrophysics Data System (ADS)

Straub, Jeremy

2017-06-01

Prior work by Zeltmann, et al. has demonstrated the impact of small defects and other irregularities on the structural integrity of 3D printed objects. It posited that such defects could be introduced intentionally. The current work looks at the impact of changing the fill level on object structural integrity. It considers whether the existence of an appropriate level of fill can be determined through visible light imagery-based assessment of a 3D printed object. A technique for assessing the quality and sufficiency of quantity of 3D printed fill material is presented. It is assessed experimentally and results are presented and analyzed.

All-temperature magnon theory of ferromagnetism

NASA Astrophysics Data System (ADS)

Datta, Sambhu N.; Panda, Anirban

2009-08-01

We present an all-temperature magnon formalism for ferromagnetic solids. To our knowledge, this is the first time that all-temperature spin statistics have been calculated. The general impression up to now is that the magnon formalism breaks down at the Curie point as it introduces a series expansion and unphysical states. Our treatment is based on an accurate quantum mechanical representation of the Holstein-Primakoff transformation. To achieve this end, we introduce the 'Kubo operator'. The treatment is valid for all 14 types of Bravais lattices, and not limited to simple cubic unit cells. In the present work, we carry out a zeroth-order treatment involving all possible spin states, and leaving out all unphysical states. In a subsequent paper we will show that the perturbed energy values are very different, but the magnetic properties undergo only small modifications from the zeroth-order results.

Underwater lidar system: design challenges and application in pollution detection

NASA Astrophysics Data System (ADS)

Gupta, Pradip; Sankolli, Swati; Chakraborty, A.

2016-05-01

The present remote sensing techniques have imposed limitations in the applications of LIDAR Technology. The fundamental sampling inadequacy of the remote sensing data obtained from satellites is that they cannot resolve in the third spatial dimension, the vertical. This limits our possibilities of measuring any vertical variability in the water column. Also the interaction between the physical and biological process in the oceans and their effects at subsequent depths cannot be modeled with present techniques. The idea behind this paper is to introduce underwater LIDAR measurement system by using a LIDAR mounted on an Autonomous Underwater Vehicle (AUV). The paper introduces working principles and design parameters for the LIDAR mounted AUV (AUV-LIDAR). Among several applications the papers discusses the possible use and advantages of AUV-LIDAR in water pollution detection through profiling of Dissolved Organic Matter (DOM) in water bodies.

Optimal Sharpening of Compensated Comb Decimation Filters: Analysis and Design

PubMed Central

Troncoso Romero, David Ernesto

2014-01-01

Comb filters are a class of low-complexity filters especially useful for multistage decimation processes. However, the magnitude response of comb filters presents a droop in the passband region and low stopband attenuation, which is undesirable in many applications. In this work, it is shown that, for stringent magnitude specifications, sharpening compensated comb filters requires a lower-degree sharpening polynomial compared to sharpening comb filters without compensation, resulting in a solution with lower computational complexity. Using a simple three-addition compensator and an optimization-based derivation of sharpening polynomials, we introduce an effective low-complexity filtering scheme. Design examples are presented in order to show the performance improvement in terms of passband distortion and selectivity compared to other methods based on the traditional Kaiser-Hamming sharpening and the Chebyshev sharpening techniques recently introduced in the literature. PMID:24578674

Optimal sharpening of compensated comb decimation filters: analysis and design.

PubMed

Troncoso Romero, David Ernesto; Laddomada, Massimiliano; Jovanovic Dolecek, Gordana

2014-01-01

Comb filters are a class of low-complexity filters especially useful for multistage decimation processes. However, the magnitude response of comb filters presents a droop in the passband region and low stopband attenuation, which is undesirable in many applications. In this work, it is shown that, for stringent magnitude specifications, sharpening compensated comb filters requires a lower-degree sharpening polynomial compared to sharpening comb filters without compensation, resulting in a solution with lower computational complexity. Using a simple three-addition compensator and an optimization-based derivation of sharpening polynomials, we introduce an effective low-complexity filtering scheme. Design examples are presented in order to show the performance improvement in terms of passband distortion and selectivity compared to other methods based on the traditional Kaiser-Hamming sharpening and the Chebyshev sharpening techniques recently introduced in the literature.

40 CFR 125.57 - Law governing issuance of a section 301(h) modified permit.

Code of Federal Regulations, 2010 CFR

2010-07-01

... the discharge of any pollutant from a publicly owned treatment works into marine waters, if the... pretreatment requirements for sources introducing waste into such treatment works will be enforced; (6) In the... pretreatment requirement in effect, sources introducing waste into such works are in compliance with all...

Mobile work: Ergonomics in a rapidly changing work environment.

PubMed

Honan, Meg

2015-01-01

Places of work have been completely transformed by innovations in mobile work tools and ever-present access to internet data. This article characterizes use patterns and provides preliminary considerations for productive and comfortable use of common mobile devices. Two surveys described trends in mobile work. In the first, ergonomics professionals who oversee programs reported common mobile devices, their users and what data is accessed. The second, an end user survey, explored common activities performed on mobile devices, duration of use and locations where mobile work is common. The survey results provide a baseline data point for the status of mobile work in early 2014. Research indicates that additional risks have been introduced to the neck, thumbs and hands when using mobile devices. Possible trends regarding device use and work locations emerge. Intervention studies provide some direction for the practitioner. Practical strategies are outlined to reduce exposure intensity and duration. Contemporary mobile work presents tremendous change and opportunity for ergonomists and researchers to keep pace with fitting the changing models of work to the person. Continued research is needed on current mobile device use patterns to better understand ergonomic risk exposure in this rapidly changing realm.

Numerical modeling of probe velocity effects for electromagnetic NDE methods

NASA Astrophysics Data System (ADS)

Shin, Y. K.; Lord, W.

The present discussion of magnetic flux (MLF) leakage inspection introduces the behavior of motion-induced currents. The results obtained indicate that velocity effects exist at even low probe speeds for magnetic materials, compelling the inclusion of velocity effects in MLF testing of oil pipelines, where the excitation level and pig speed are much higher than those used in the present work. Probe velocity effect studies should influence probe design, defining suitable probe speed limits and establishing training guidelines for defect-characterization schemes.

Reflections on the nature of genius: on the 300th anniversay of Mikhail Lomonosov (1711-1765)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shiltsev, V.; /Fermilab

2012-02-01

This presentation goes beyond celebratory narration of the life and scientific achievements of Russia's first modern scientist Mikhail Vasilievich Lomonosov (1711-1765). Coming from the notion of complexity of sciences, we introduce 'a genius formula' G = TBD for semi-qualitative evaluation of a person's impact on the society, distinguish two type of geniuses, give several examples and draw general conclusions. The work largely follows presentation at the Fermilab Colloquium in November of 2011.

Let's Get Real: Deeper Learning and the Power of the Workplace. Deeper Learning Research Series

ERIC Educational Resources Information Center

Hoffman, Nancy

2015-01-01

For young people in the United States, whatever their backgrounds, one of the essential purposes of schooling should be to help them develop the knowledge, skills, and competence needed to search for and obtain work that they find at least reasonably satisfying. Our present educational system does precious little to introduce young people to the…

CSMP Mathematics for the Intermediate Grades Part IV, Teacher's Guide. General Introduction. Workbooks. Experimental Version.

ERIC Educational Resources Information Center

Armstrong, Richard; And Others

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

CSMP Mathematics for the Intermediate Grades Part I, Teacher's Guide. General Introduction. Workbooks. Experimental Version.

ERIC Educational Resources Information Center

Kaufman, Burt; And Others

This guide represents the final experimental version of an extended pilot project which was conducted in the United States between 1973 and 1976. The manner of presentation and pedagogical ideas and tools are based on the works of George and Frederique Papy. They are recognized as having introduced colored arrow drawings ("papygrams")…

CSMP Mathematics for the Intermediate Grades Part III, Teacher's Guide [and] Worksheets. General Introduction. Workbooks. Experimental Version.

ERIC Educational Resources Information Center

Harpel, Jim; And Others

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

CSMP Mathematics for the Intermediate Grades Part I, Teacher's Guide [and] Worksheets. The World of Numbers. Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of an extended pilot project which was conducted in the United States between 1973 and 1976. The manner of presentation and pedagogical ideas and tools are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings ("papygrams")…

CSMP Mathematics for the Intermediate Grades Part III, Teacher's Guide. The World of Numbers. Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

CSMP Mathematics for the Intermediate Grades Part II, Teacher's Guide. General Introduction. Workbooks. Experimental Version.

ERIC Educational Resources Information Center

Harpel, Jim; And Others

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

Embodied Germ Cell at Work: Building an Expansive Concept of Physical Mobility in Home Care

ERIC Educational Resources Information Center

Engestrom, Yrjo; Nummijoki, Jaana; Sannino, Annalisa

2012-01-01

This article presents a process of collective formation of a new concept of mobility between home care workers and their elderly clients, who are at risk of losing physical mobility and functional capacity. A new tool called mobility agreement was introduced to facilitate the inclusion of regular mobility exercises in home care visits and in the…

Getting the Most Out of Training: For Employers Working with Apprentices and Trainees.

ERIC Educational Resources Information Center

Howell, Chris; Toohey, Sandra; Davidson, Liz

This document presents information to help Australian employers of apprentices and trainees to get the most out of training. The following are among the areas of personnel management and training for which guidelines are offered: (1) inducting employees, introducing them to the job, and inspiring them by explaining how their job fits into the big…

The Relationship between Passibility, Agency and Social Interaction and Its Relevance for Research and Pedagogy

ERIC Educational Resources Information Center

Kirch, Susan A.; Ma, Jasmine Y.

2016-01-01

The interaction analysis presented by Kim and Roth examines nine students, their teachers, the learning task and materials in a mixed second and third grade science classroom during the school day. In the research narrative readers are introduced to two resourceful and creative groups of students as they work on a task assigned by their…

CSMP Mathematics for the Intermediate Grades Part IV, Teacher's Guide. The World of Numbers. Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

Learning for and about Sustainability in Higher Education--A Regional Perspective Based on Experiences from the Baltic and the Mediterranean

ERIC Educational Resources Information Center

Scoullos, Michael; Malotidi, Vicky; Lindroos, Paula; Suomalainen, Sinikka

2017-01-01

Purpose: The purpose of the paper is to present and compare collective efforts of higher education institutions working through regional networks in introducing and promoting education for sustainable development (ESD) and environmental education (EE) in two most significant EU boarder regions. Efforts to support EE/ESD in higher education are…

Art Curriculum that Works: Space, School and Beyond

ERIC Educational Resources Information Center

Healy, John W.

2006-01-01

This article presents information on the development of an integrated curriculum that uses both art and science in the study of the solar system. The art aspect of this lesson is introduced with the use of multiple images of space and its visual offerings, which will focus the class on the lesson and gain their attention. Among other things, the…

Measuring: From Paces to Feet. Used Numbers: Real Data in the Classroom. Grades 3-4.

ERIC Educational Resources Information Center

Corwin, Rebecca B.; Russell, Susan Jo

A unit of study that introduces measuring as a way of collecting data is presented. Suitable for students in grades 3 and 4, it provides a foundation for further work in statistics and data analysis. The investigations may extend from one to four class sessions and are grouped into three parts: "Introduction to Measurement"; "Using Standard…

Statistics: The Shape of the Data. Used Numbers: Real Data in the Classroom. Grades 4-6.

ERIC Educational Resources Information Center

Russell, Susan Jo; Corwin, Rebecca B.

A unit of study that introduces collecting, representing, describing, and interpreting data is presented. Suitable for students in grades 4 through 6, it provides a foundation for further work in statistics and data analysis. The investigations may extend from one to four class sessions and are grouped into three parts: "Introduction to Data…

Using Mung Beans as a Simple, Informative Means to Evaluate the Phytotoxicity of Engineered Nanomaterials and Introduce the Concept of Nanophytotoxicity to Undergraduate Students

ERIC Educational Resources Information Center

Ross, Shailise S.; Owen, Matthew J.; Pedersen, Brian P.; Liu, Gang-yu; Miller, William J. W.

2016-01-01

This work presents a lecture and lab series that focuses on teaching the concept of nanophytotoxicity to undergraduate students in a relatively simple experiment. In this experiment, students evaluated the phytotoxicity of engineered nanomaterials (ENMs) using mung beans (i.e., "Vigna radiata") and industrially relevant, commercially…

Art Image Preschool: Introducing 3-to-5-Year-Old Children to Art and Artists. [Packet] 5: Children Together. Teacher's Guide.

ERIC Educational Resources Information Center

Thompson, Christine

This teacher's guide accompanies a packet of five art reproductions based on children as a theme. The guide offers suggestions for engaging children's attention and curiosity about art and artists, and encourages exploration of the issues these works present through art activities, discussions, learning centers, field trips, and other experiences…

Learning to Stand: The Acceptability and Feasibility of Introducing Standing Desks into College Classrooms

PubMed Central

Benzo, Roberto M.; Gremaud, Allene L.; Jerome, Matthew; Carr, Lucas J.

2016-01-01

Prolonged sedentary behavior is an independent risk factor for multiple negative health outcomes. Evidence supports introducing standing desks into K-12 classrooms and work settings to reduce sitting time, but no studies have been conducted in the college classroom environment. The present study explored the acceptability and feasibility of introducing standing desks in college classrooms. A total of 993 students and 149 instructors completed a single online needs assessment survey. This cross-sectional study was conducted during the fall semester of 2015 at a large Midwestern University. The large majority of students (95%) reported they would prefer the option to stand in class. Most students (82.7%) reported they currently sit during their entire class time. Most students (76.6%) and instructors (86.6%) reported being in favor of introducing standing desks into college classrooms. More than half of students and instructors predicted having access to standing desks in class would improve student’s “physical health”, “attention”, and “restlessness”. Collectively, these findings support the acceptability of introducing standing desks in college classrooms. Future research is needed to test the feasibility, cost-effectiveness and efficacy of introducing standing desks in college classrooms. Such studies would be useful for informing institutional policies regarding classroom designs. PMID:27537901

Logic and memory concepts for all-magnetic computing based on transverse domain walls

NASA Astrophysics Data System (ADS)

Vandermeulen, J.; Van de Wiele, B.; Dupré, L.; Van Waeyenberge, B.

2015-06-01

We introduce a non-volatile digital logic and memory concept in which the binary data is stored in the transverse magnetic domain walls present in in-plane magnetized nanowires with sufficiently small cross sectional dimensions. We assign the digital bit to the two possible orientations of the transverse domain wall. Numerical proofs-of-concept are presented for a NOT-, AND- and OR-gate, a FAN-out as well as a reading and writing device. Contrary to the chirality based vortex domain wall logic gates introduced in Omari and Hayward (2014 Phys. Rev. Appl. 2 044001), the presented concepts remain applicable when miniaturized and are driven by electrical currents, making the technology compatible with the in-plane racetrack memory concept. The individual devices can be easily combined to logic networks working with clock speeds that scale linearly with decreasing design dimensions. This opens opportunities to an all-magnetic computing technology where the digital data is stored and processed under the same magnetic representation.

Scalar field collapse in gauge theory gravity

NASA Astrophysics Data System (ADS)

Harke, Richard Eugene

A brief introduction to gravitational collapse in General Relativity is given. Then critical phenomena in the collapse of a massless scalar field as discovered by Choptuik are described. My own work in this area is described and some results are presented. Gauge Theory Gravity and its mathematical formalism, geometric algebra are introduced. Because geometric algebra is not widely known, a detailed and rigorous introduction to it is provided. The basic principles of Gauge Theory Gravity (GTG) are described and a derivation of the field equations is presented. An appropriate Lagrangian for the scalar field in GTG is introduced and the energy tensor is derived by the usual variational process. The equations of motion for the scalar field are derived for a spherically symmetric space. Finite difference approximations to these equations are constructed and simulations of gravitational collapse are run on a computer. Graphical results are presented. An unexpected phenomenon is found in which the passage of the scalar field leaves a persistent change in the gravitational gauge field.

Covariant Conformal Decomposition of Einstein Equations

NASA Astrophysics Data System (ADS)

Gourgoulhon, E.; Novak, J.

It has been shown1,2 that the usual 3+1 form of Einstein's equations may be ill-posed. This result has been previously observed in numerical simulations3,4. We present a 3+1 type formalism inspired by these works to decompose Einstein's equations. This decomposition is motivated by the aim of stable numerical implementation and resolution of the equations. We introduce the conformal 3-``metric'' (scaled by the determinant of the usual 3-metric) which is a tensor density of weight -2/3. The Einstein equations are then derived in terms of this ``metric'', of the conformal extrinsic curvature and in terms of the associated derivative. We also introduce a flat 3-metric (the asymptotic metric for isolated systems) and the associated derivative. Finally, the generalized Dirac gauge (introduced by Smarr and York5) is used in this formalism and some examples of formulation of Einstein's equations are shown.

[Work process and working conditions in poultry processing plants: report of a survey on occupational health surveillance].

PubMed

Oliveira, Paulo Antonio Barros; Mendes, Jussara Maria Rosa

2014-12-01

This article presents the report of a survey on health surveillance activities performed in poultry processing plants in the south of Brazil. It aims to contribute to an understanding of the work process developed, the growth of the sector, the organization of labor and the confrontation with the economic model of this sector, which has been exposing employees to working conditions that undermine their health. The working conditions identified are considered largely incompatible with health and human dignity. The study supports interinstitutional intervention, especially with the Public Ministry of Labor, criticizes the weak implementation of specific government interventions in health conditions in the industry and introduces the new Regulatory Standard 36 as a positive perspective for the near future.

Working Memory and Neurofeedback.

PubMed

YuLeung To, Eric; Abbott, Kathy; Foster, Dale S; Helmer, D'Arcy

2016-01-01

Impairments in working memory are typically associated with impairments in other cognitive faculties such as attentional processes and short-term memory. This paper briefly introduces neurofeedback as a treatment modality in general, and, more specifically, we review several of the current modalities successfully used in neurofeedback (NF) for the treatment of working memory deficits. Two case studies are presented to illustrate how neurofeedback is applied in treatment. The development of Low Resolution Electromagnetic Tomography (LORETA) and its application in neurofeedback now makes it possible to specifically target deep cortical/subcortical brain structures. Developments in neuroscience concerning neural networks, combined with highly specific yet practical NF technologies, makes neurofeedback of particular interest to neuropsychological practice, including the emergence of specific methodologies for treating very difficult working memory (WM) problems.

Review of chart recognition in document images

NASA Astrophysics Data System (ADS)

Liu, Yan; Lu, Xiaoqing; Qin, Yeyang; Tang, Zhi; Xu, Jianbo

2013-01-01

As an effective information transmitting way, chart is widely used to represent scientific statistics datum in books, research papers, newspapers etc. Though textual information is still the major source of data, there has been an increasing trend of introducing graphs, pictures, and figures into the information pool. Text recognition techniques for documents have been accomplished using optical character recognition (OCR) software. Chart recognition techniques as a necessary supplement of OCR for document images are still an unsolved problem due to the great subjectiveness and variety of charts styles. This paper reviews the development process of chart recognition techniques in the past decades and presents the focuses of current researches. The whole process of chart recognition is presented systematically, which mainly includes three parts: chart segmentation, chart classification, and chart Interpretation. In each part, the latest research work is introduced. In the last, the paper concludes with a summary and promising future research direction.

[Offshore substation workers' exposure to harmful factors - Actions minimizing risk of hazards].

PubMed

Piotrowski, Paweł Janusz; Robak, Sylwester; Polewaczyk, Mateusz Maksymilian; Raczkowski, Robert

2016-01-01

The current development of electric power industry in Poland, especially in the field of renewable energy sources, including wind power, brings about the need to introduce legislation on new work environment. The development of occupational safety and health (OSH) regulations that must be met by new workplaces, such as offshore substations becomes necessary in view of the construction of modern offshore wind power plants - offshore wind farms. Staying on offshore substation is associated with an increased exposure to harmful health factors: physical, chemical, biological and psychophysical. The main sources of health risks on offshore substations are: temperature, electromagnetic field, noise from operating wind turbines, direct and alternating current, chemicals, Legionella bacteria and social isolation of people. The aim of this article is to draw attention to the problem of offshore substation workers' exposure to harmful factors and to present methods of preventing and reducing the risk-related adverse health effects. In this paper, there are identified and described risks occurring on offshore substations (fire, explosion, lightning, accidents at work). Some examples of the means and the methods for reducing the negative impact of exposure on the human health are presented and discussed. The article also highlights the need to develop appropriate laws and health and safety regulations concerning the new working environment at the offshore substations. The review of researches and international standards shows that some of them can be introduced into the Polish labor market. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Two-stroke S.I. engine competitive to four-stroke engine in terms of the exhaust emission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pavletic, R.; Trenc, F.

1994-09-01

A model engine with disintegrated working cycle was built. Its operation is not autonomous; compression of the working air is performed separately outside the engine by the compressed-air line supply. Pre-compressed charge together with the injected fuel is introduced in the combustion chamber. The model engine makes possible to determine indicated performance characteristics and its emission capability. Effective measured engine characteristics are of course not comparable with those obtained by a practical engine. The model presented is a two-stroke cycle engine. Exhaust emission picture of the presented engine is comparable with the emission of a modern four-stroke engine. 2 refs.,more » 13 figs., 2 tabs.« less

Parameterized hardware description as object oriented hardware model implementation

NASA Astrophysics Data System (ADS)

Drabik, Pawel K.

2010-09-01

The paper introduces novel model for design, visualization and management of complex, highly adaptive hardware systems. The model settles component oriented environment for both hardware modules and software application. It is developed on parameterized hardware description research. Establishment of stable link between hardware and software, as a purpose of designed and realized work, is presented. Novel programming framework model for the environment, named Graphic-Functional-Components is presented. The purpose of the paper is to present object oriented hardware modeling with mentioned features. Possible model implementation in FPGA chips and its management by object oriented software in Java is described.

CSMP Mathematics for the Upper Primary Grades Part II, Teacher's Guide [and] Worksheets. General Introduction. The World of Numbers. Final Experimental Version.

ERIC Educational Resources Information Center

Heidema, Clare; Schweitzer, Janis

This guide represents the final experimental version of a pilot project conducted in the United States between 1973 and 1976. The ideas and manner of presentation are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings ("papygrams") and models of our numeration system (the…

CSMP Mathematics for the Intermediate Grades Part II, Teacher's Guide [and] Worksheets. The World of Numbers. Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

CSMP Mathematics for the Upper Primary Grades Part I, Teacher's Guide [and] Worksheets. General Introduction. The World of Numbers. Final Experimental Version.

ERIC Educational Resources Information Center

Heidema, Clare; Schweitzer, Janis

This guide represents the final experimental version of a pilot project conducted in the United States between 1973 and 1976. The ideas and manner of presentation are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings ("papygrams") and models of our numeration system (the…

Assessing Whether Students Seek Constructive Criticism: The Design of an Automated Feedback System for a Graphic Design Task

ERIC Educational Resources Information Center

Cutumisu, Maria; Blair, Kristen P.; Chin, Doris B.; Schwartz, Daniel L.

2017-01-01

We introduce a choice-based assessment strategy that measures students' choices to seek constructive feedback and to revise their work. We present the feedback system of a game we designed to assess whether students choose positive or negative feedback and choose to revise their posters in the context of a poster design task, where they learn…

Approaching a parameter-free metadynamics.

PubMed

Dickson, Bradley M

2011-09-01

We present a unique derivation of metadynamics. This work leads to a more robust understanding of the error in the computed free energy than what has been obtained previously. Moreover, a formula for the exact free energy is introduced. The formula can be used to post-process any existing well-tempered metadynamics data, allowing one, in principle, to obtain an exact free energy regardless of the metadynamics parameters.

Approaching a parameter-free metadynamics

NASA Astrophysics Data System (ADS)

Dickson, Bradley M.

2011-09-01

We present a unique derivation of metadynamics. This work leads to a more robust understanding of the error in the computed free energy than what has been obtained previously. Moreover, a formula for the exact free energy is introduced. The formula can be used to post-process any existing well-tempered metadynamics data, allowing one, in principle, to obtain an exact free energy regardless of the metadynamics parameters.

Art Image Preschool: Introducing 3-to-5-Year-Old Children to Art and Artists. [Packet] 3: Portraits Are Images of People. Teacher's Guide.

ERIC Educational Resources Information Center

Thompson, Christine

This teacher's guide accompanies a packet of five art reproductions based on portraits as a theme. The guide offers suggestions for engaging children's attention and curiosity about art and artists, and encourages exploration of the issues these works present through art activities, discussions, learning centers, field trips, and other experiences…

Art Image Preschool: Introducing 3-to-5-Year-Old Children to Art and Artists. [Packet] 2: Pets Are Part of Our Lives. Teacher's Guide.

ERIC Educational Resources Information Center

Thompson, Christine

This teacher's guide accompanies a packet of five art reproductions based on pets as a theme. The guide offers suggestions for engaging children's attention and curiosity about art and artists, and encourages exploration of the issues these works present through art activities, discussions, learning centers, field trips, and other experiences…

The random field Blume-Capel model revisited

NASA Astrophysics Data System (ADS)

Santos, P. V.; da Costa, F. A.; de Araújo, J. M.

2018-04-01

We have revisited the mean-field treatment for the Blume-Capel model under the presence of a discrete random magnetic field as introduced by Kaufman and Kanner (1990). The magnetic field (H) versus temperature (T) phase diagrams for given values of the crystal field D were recovered in accordance to Kaufman and Kanner original work. However, our main goal in the present work was to investigate the distinct structures of the crystal field versus temperature phase diagrams as the random magnetic field is varied because similar models have presented reentrant phenomenon due to randomness. Following previous works we have classified the distinct phase diagrams according to five different topologies. The topological structure of the phase diagrams is maintained for both H - T and D - T cases. Although the phase diagrams exhibit a richness of multicritical phenomena we did not found any reentrant effect as have been seen in similar models.

Numerical simulation of electromagnetic surface treatment

NASA Astrophysics Data System (ADS)

Sonde, Emmanuel; Chaise, Thibaut; Nelias, Daniel; Robin, Vincent

2018-01-01

Surface treatment methods, such as shot peening or laser shock peening, are generally used to introduce superficial compressive residual stresses in mechanical parts. These processes are carried out during the manufacturing steps or for the purpose of repairing. The compressive residual stresses prevent the initiation and growth of cracks and thus improve the fatigue life of mechanical components. Electromagnetic pulse peening (EMP) is an innovative process that could be used to introduce compressive residual stresses in conductive materials. It acts by generating a high transient electromagnetic field near the working surface. In this paper, the EMP process is presented and a sequentially coupled electromagnetic and mechanical model is developed for its simulation. This 2D axisymmetric model is set up with the commercial finite element software SYSWELD. After description and validation, the numerical model is used to simulate a case of introducing residual stresses of compression in a nickel-based alloy 690 thick sample, by the means of electromagnetic pulses. The results are presented in terms of effective plastic strain and residual mean stress. The influence of the process parameters, such as current intensity and frequency, on the results is analyzed. Finally, the predictability of the process is shown by several correlation studies.

Valentino Braitenberg: From neuroanatomy to behavior and back.

PubMed

Negrello, Mario

2014-10-01

This article compiles an expose of Valentino Braitenberg's singular view on neuroanatomy and neuroscience. The review emphasizes his topologically informed work on neuroanatomy and his dialectics of brain-based explanations of motor behavior. Some of his early ideas on topologically informed neuroanatomy are presented, together with some of his more obscure work on the taxonomy of neural fiber bundles and synaptic arborizations. His functionally informed interpretations of neuroanatomy of the cerebellum, cortex, and hippocampus, are introduced. Finally, we will touch on his philosophical views and the inextricable role of function in the explanation of neural behavior.

Should biomedical research be like Airbnb?

PubMed

Bonazzi, Vivien R; Bourne, Philip E

2017-04-01

The thesis presented here is that biomedical research is based on the trusted exchange of services. That exchange would be conducted more efficiently if the trusted software platforms to exchange those services, if they exist, were more integrated. While simpler and narrower in scope than the services governing biomedical research, comparison to existing internet-based platforms, like Airbnb, can be informative. We illustrate how the analogy to internet-based platforms works and does not work and introduce The Commons, under active development at the National Institutes of Health (NIH) and elsewhere, as an example of the move towards platforms for research.

Ergonomics and sitting at work.

PubMed

Corlett, E N

2009-01-01

Many factors influence the performance at the workplace. The immediate interface between the user and the equipment is, perhaps, the most important. Hence, the arrangements of the seat and work point are critical.Factors which cause discomfort and injury to seated workers are described and, from the behaviour of the spine under load, a better seat design is presented. Its use by a wide variety of workers makes it necessary to introduce increased adjustability, beyond that normally part of conventional seat design. The application of the new design in two cases in industry, as well as its introduction in schools, is briefly covered.

Should biomedical research be like Airbnb?

PubMed Central

Bonazzi, Vivien R.

2017-01-01

The thesis presented here is that biomedical research is based on the trusted exchange of services. That exchange would be conducted more efficiently if the trusted software platforms to exchange those services, if they exist, were more integrated. While simpler and narrower in scope than the services governing biomedical research, comparison to existing internet-based platforms, like Airbnb, can be informative. We illustrate how the analogy to internet-based platforms works and does not work and introduce The Commons, under active development at the National Institutes of Health (NIH) and elsewhere, as an example of the move towards platforms for research. PMID:28388615

Multiple social identities and stereotype threat: imbalance, accessibility, and working memory.

PubMed

Rydell, Robert J; McConnell, Allen R; Beilock, Sian L

2009-05-01

In 4 experiments, the authors showed that concurrently making positive and negative self-relevant stereotypes available about performance in the same ability domain can eliminate stereotype threat effects. Replicating past work, the authors demonstrated that introducing negative stereotypes about women's math performance activated participants' female social identity and hurt their math performance (i.e., stereotype threat) by reducing working memory. Moving beyond past work, it was also demonstrated that concomitantly presenting a positive self-relevant stereotype (e.g., college students are good at math) increased the relative accessibility of females' college student identity and inhibited their gender identity, eliminating attendant working memory deficits and contingent math performance decrements. Furthermore, subtle manipulations in questions presented in the demographic section of a math test eliminated stereotype threat effects that result from women reporting their gender before completing the test. This work identifies the motivated processes through which people's social identities became active in situations in which self-relevant stereotypes about a stigmatized group membership and a nonstigmatized group membership were available. In addition, it demonstrates the downstream consequences of this pattern of activation on working memory and performance. Copyright (c) 2009 APA, all rights reserved.

The Physics and Applications of High Brightness Beams: Working Group C Summary on Applications to FELS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nuhn, Heinz-Dieter

2003-03-19

This is the summary of the activities in working group C, ''Application to FELs,'' which was based in the Bithia room at the Joint ICFA Advanced Accelerator and Beam Dynamics Workshop on July 1-6, 2002 in Chia Laguna, Sardinia, Italy. Working group C was small in relation to the other working groups at that workshop. Attendees include Enrica Chiadroni, University of Rome ape with an identical pulse length. ''La Sapienza'', Luca Giannessi, ENEA, Steve Lidia, LBNL, Vladimir Litvinenko, Duke University, Patrick Muggli, UCLA, Alex Murokh, UCLA, Heinz-Dieter Nuhn, SLAC, Sven Reiche, UCLA, Jamie Rosenzweig, UCLA, Claudio Pellegrini, UCLA, Susan Smith,more » Daresbury Laboratory, Matthew Thompson, UCLA, Alexander Varfolomeev, Russian Research Center, plus a small number of occasional visitors. The working group addressed a total of nine topics. Each topic was introduced by a presentation, which initiated a discussion of the topic during and after the presentation. The speaker of the introductory presentation facilitated the discussion. There were six topics that were treated in stand-alone sessions of working group C. In addition, there were two joint sessions, one with working group B, which included one topic, and one with working group C, which included two topics. The presentations that were given in the joint sessions are summarized in the working group summary reports for groups B and D, respectively. This summary will only discuss the topics that were addressed in the stand-alone sessions, including Start-To-End Simulations, SASE Experiment, PERSEO, ''Optics Free'' FEL Oscillators, and VISA II.« less

The Relationship between Visual Attention and Visual Working Memory Encoding: A Dissociation between Covert and Overt Orienting

PubMed Central

Tas, A. Caglar; Luck, Steven J.; Hollingworth, Andrew

2016-01-01

There is substantial debate over whether visual working memory (VWM) and visual attention constitute a single system for the selection of task-relevant perceptual information or whether they are distinct systems that can be dissociated when their representational demands diverge. In the present study, we focused on the relationship between visual attention and the encoding of objects into visual working memory (VWM). Participants performed a color change-detection task. During the retention interval, a secondary object, irrelevant to the memory task, was presented. Participants were instructed either to execute an overt shift of gaze to this object (Experiments 1–3) or to attend it covertly (Experiments 4 and 5). Our goal was to determine whether these overt and covert shifts of attention disrupted the information held in VWM. We hypothesized that saccades, which typically introduce a memorial demand to bridge perceptual disruption, would lead to automatic encoding of the secondary object. However, purely covert shifts of attention, which introduce no such demand, would not result in automatic memory encoding. The results supported these predictions. Saccades to the secondary object produced substantial interference with VWM performance, but covert shifts of attention to this object produced no interference with VWM performance. These results challenge prevailing theories that consider attention and VWM to reflect a common mechanism. In addition, they indicate that the relationship between attention and VWM is dependent on the memorial demands of the orienting behavior. PMID:26854532

Microstructural Evolution in Intensively Melt Sheared Direct Chill Cast Al-Alloys

NASA Astrophysics Data System (ADS)

Jones, S.; Rao, A. K. Prasada; Patel, J. B.; Scamans, G. M.; Fan, Z.

The work presented here introduces the novel melt conditioned direct chill casting (MC-DC) technology, where intensive melt shearing is applied to the conventional direct-chill casting process. MC-DC casting can successfully produce high quality Al-alloy billets. The results obtained from 80 mm diameter billets cast at speed of 200 mm/min show that MC-DC casting of Al-alloys, substantially refines the microstructure and reduces macro-segregation. In this paper, we present the preliminary results and discuss microstructural evolution during MC-DC casting of Al-alloys.

CSMP Mathematics for the Intermediate Grades Part IV, Teacher's Guide. The Languages of Strings and Arrows. Geometry and Measurement. Probability and Statistics.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

CSMP Mathematics for the Upper Primary Grades Part I, Teacher's Guide. The Languages of Strings and Arrows. Geometry and Measurement. Workbooks. Final Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of a pilot project conducted in the Unites States between 1973 and 1976. The ideas and manner of presentation are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings ("papygrams") and models of our numeration system (the…

CSMP Mathematics for the Upper Primary Grades Part II, Teacher's Guide. The Languages of Strings and Arrows. Geometry and Measurement. Workbooks. Final Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of an extended pilot project which was conducted in the United States between 1973 and 1976. The manner of presentation and the pedagogical ideas and tools are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings…

CSMP Mathematics for the Intermediate Grades Part II, Teacher's Guide. The Languages of Strings and Arrows. Geometry and Measurement. Probability and Statistics. Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

CSMP Mathematics for the Intermediate Grades Part III, Teacher's Guide. The Languages of Strings and Arrows. Geometry and Measurement. Probability and Statistics. Experimental Version.

ERIC Educational Resources Information Center

CEMREL, Inc., St. Ann, MO.

This guide represents the final experimental version of a pilot project which was conducted in the United States between 1973 and 1976. The ideas and the manner of presentation are based on the works of Georges and Frederique Papy. They are recognized for having introduced colored arrow drawings ("papygrams") and models of our numeration…

Symmetry Energy Effects in the Neutron Star Properties

NASA Astrophysics Data System (ADS)

Alvarez-Castillo, D. E.; Kubis, S.

2012-12-01

The functional form of the nuclear symmetry energy has only been determined in a very narrow range of densities. Uncertainties concern both the low as well as the high density behaviour of this function. In this work different shapes of the symmetry energy, consistent with the experimental data, were introduced and their consequences for the crustal properties of neutron stars are presented. The resulting models are in agreement with astrophysical observations.

A Hough Transform Global Probabilistic Approach to Multiple-Subject Diffusion MRI Tractography

DTIC Science & Technology

2010-04-01

distribution unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT A global probabilistic fiber tracking approach based on the voting process provided by...umn.edu 2 ABSTRACT A global probabilistic fiber tracking approach based on the voting process provided by the Hough transform is introduced in...criteria for aligning curves and particularly tracts. In this work, we present a global probabilistic approach inspired by the voting procedure provided

Polypeptide formation on polar mineral surfaces: possibility of complete chirality

NASA Astrophysics Data System (ADS)

Schrader, Malcolm E.

2017-01-01

In the present work, it is shown that thermodynamically feasible polymerization of cyanomethanol, which can be formed from formaldehyde and hydrogen cyanide, can lead to synthesis of polypeptides as well as to the previously reported synthesis of RNA. If the polymerization takes place on a one-dimensional feature of a mineral, such as for example a crack on its surface, the concept of quasi-chirality is introduced to describe the adsorbed polypeptide. This, in principle, would lead to formation of proteins that are completely homochiral in their alpha carbon groups. The concept of quasi-chirality can also be introduced in the condensation of glycine under similar conditions to form a polypeptide. This again leads to proteins completely chiral in their alpha carbon groups.

Rainbows without unicorns: metric structures in theories with modified dispersion relations

NASA Astrophysics Data System (ADS)

Lobo, Iarley P.; Loret, Niccoló; Nettel, Francisco

2017-07-01

Rainbow metrics are a widely used approach to the metric formalism for theories with modified dispersion relations. They have had a huge success in the quantum gravity phenomenology literature, since they allow one to introduce momentum-dependent space-time metrics into the description of systems with a modified dispersion relation. In this paper, we introduce the reader to some realizations of this general idea: the original rainbow metrics proposal, the momentum-space-inspired metric and a Finsler geometry approach. As the main result of this work we also present an alternative definition of a four-velocity dependent metric which allows one to handle the massless limit. This paper aims to highlight some of their properties and how to properly describe their relativistic realizations.

Vehicle Maneuver Detection with Accelerometer-Based Classification.

PubMed

Cervantes-Villanueva, Javier; Carrillo-Zapata, Daniel; Terroso-Saenz, Fernando; Valdes-Vela, Mercedes; Skarmeta, Antonio F

2016-09-29

In the mobile computing era, smartphones have become instrumental tools to develop innovative mobile context-aware systems. In that sense, their usage in the vehicular domain eases the development of novel and personal transportation solutions. In this frame, the present work introduces an innovative mechanism to perceive the current kinematic state of a vehicle on the basis of the accelerometer data from a smartphone mounted in the vehicle. Unlike previous proposals, the introduced architecture targets the computational limitations of such devices to carry out the detection process following an incremental approach. For its realization, we have evaluated different classification algorithms to act as agents within the architecture. Finally, our approach has been tested with a real-world dataset collected by means of the ad hoc mobile application developed.

Modeling of Biometric Identification System Using the Colored Petri Nets

NASA Astrophysics Data System (ADS)

Petrosyan, G. R.; Ter-Vardanyan, L. A.; Gaboutchian, A. V.

2015-05-01

In this paper we present a model of biometric identification system transformed into Petri Nets. Petri Nets, as a graphical and mathematical tool, provide a uniform environment for modelling, formal analysis, and design of discrete event systems. The main objective of this paper is to introduce the fundamental concepts of Petri Nets to the researchers and practitioners, both from identification systems, who are involved in the work in the areas of modelling and analysis of biometric identification types of systems, as well as those who may potentially be involved in these areas. In addition, the paper introduces high-level Petri Nets, as Colored Petri Nets (CPN). In this paper the model of Colored Petri Net describes the identification process much simpler.

Role of affect in decision making.

PubMed

Bandyopadhyay, Debarati; Pammi, V S Chandrasekhar; Srinivasan, Narayanan

2013-01-01

Emotion plays a major role in influencing our everyday cognitive and behavioral functions, including decision making. We introduce different ways in which emotions are characterized in terms of the way they influence or elicited by decision making. This chapter discusses different theories that have been proposed to explain the role of emotions in judgment and decision making. We also discuss incidental emotional influences, both long-duration influences like mood and short-duration influences by emotional context present prior to or during decision making. We present and discuss results from a study with emotional pictures presented prior to decision making and how that influences both decision processes and postdecision experience as a function of uncertainty. We conclude with a summary of the work on emotions and decision making in the context of decision-making theories and our work on incidental emotions. Copyright © 2013 Elsevier B.V. All rights reserved.

Advances in drainage: Selected works from the Tenth International Drainage Symposium

USGS Publications Warehouse

Strock, Jeffrey S.; Hay, Christopher; Helmers, Matthew; Nelson, Kelly A.; Sands, Gary R.; Skaggs, R. Wayne; Douglas-Mankin, Kyle R.

2018-01-01

This article introduces a special collection of fourteen articles accepted from among the 140 technical presentations, posters, and meeting papers presented at the 10th International ASABE Drainage Symposium. The symposium continued in the tradition of previous symposia that began in 1965 as a forum for presenting and assessing the progress of drainage research and implementation throughout the world. The articles in this collection address a wide range of topics grouped into five broad categories: (1) crop response, (2) design and management, (3) hydrology and scale, (4) modeling, and (5) water quality. The collection provides valuable information for scientists, engineers, planners, and others working on crop production, water quality, and water quantity issues affected by agricultural drainage. The collection also provides perspectives on the challenges of increasing agricultural production in a changing climate, with ever-greater attention to water quality and quantity concerns that will require integrated technical, economic, and social solutions.

Parareal algorithms with local time-integrators for time fractional differential equations

NASA Astrophysics Data System (ADS)

Wu, Shu-Lin; Zhou, Tao

2018-04-01

It is challenge work to design parareal algorithms for time-fractional differential equations due to the historical effect of the fractional operator. A direct extension of the classical parareal method to such equations will lead to unbalance computational time in each process. In this work, we present an efficient parareal iteration scheme to overcome this issue, by adopting two recently developed local time-integrators for time fractional operators. In both approaches, one introduces auxiliary variables to localized the fractional operator. To this end, we propose a new strategy to perform the coarse grid correction so that the auxiliary variables and the solution variable are corrected separately in a mixed pattern. It is shown that the proposed parareal algorithm admits robust rate of convergence. Numerical examples are presented to support our conclusions.

Topological phonon modes in filamentary structures

NASA Astrophysics Data System (ADS)

Berg, Nina; Joel, Kira; Koolyk, Miriam; Prodan, Emil

2011-02-01

This work describes a class of topological phonon modes, that is, mechanical vibrations localized at the edges of special structures that are robust against the deformations of the structures. A class of topological phonons was recently found in two-dimensional structures similar to that of microtubules. The present work introduces another class of topological phonons, this time occurring in quasi-one-dimensional filamentary structures with inversion symmetry. The phenomenon is exemplified using a structure inspired from that of actin microfilaments, present in most live cells. The system discussed here is probably the simplest structure that supports topological phonon modes, a fact that allows detailed analysis in both time and frequency domains. We advance the hypothesis that the topological phonon modes are ubiquitous in the biological world and that living organisms make use of them during various processes.

Introducing the Concept of Spirit Injury in Education-to-Work Transitions

ERIC Educational Resources Information Center

Persaud, Renu Sharma

2009-01-01

This paper introduces the topic of spiritual injury and the possible influences and relationships it might share with education-to-work transitions of young adults. Students of both dominant and minority cultural backgrounds were interviewed to gain a detailed understanding of how perceptions of transitions came about. Further, I sought to…

Enantioresolution in electrokinetic chromatography-complete filling technique using sulfated gamma-cyclodextrin. Software-free topological anticipation.

PubMed

Escuder-Gilabert, Laura; Martín-Biosca, Yolanda; Medina-Hernández, María José; Sagrado, Salvador

2016-10-07

Few papers have tried to predict the resolution ability of chiral selectors in capillary electrophoresis for the separation of the enantiomers of chiral compounds. In a previous work, we have used molecular information available on-line to establish enantioresolution levels of basic compounds using highly sulfated β-CD (HS-β-CD) as chiral selector in electrokinetic chromatography-complete filling technique (EKC-CFT). The present study is a continuation of this previous work, introducing some novelties. In this work, the ability of sulfated γ-cyclodextrin (S-γ-CD) as chiral selector in EKC-CFT is modelled for the first time. Thirty-three structurally unrelated cationic and neutral compounds (drugs and pesticides) are studied. Categorical enantioresolution levels (RsC, 0 or 1) are assigned from experimental enantioresolution values obtained at different S-γ-CD concentrations. Novel topological parameters connected to the chiral carbon (C * -parameters) are introduced. Four C * -parameters and a topological parameter of the whole molecule (aromatic atom count) are the most important variables according to a discriminant partial least squares-variable selection process. It suggests the preponderance of the topology adjacent to the chiral carbon to anticipate the RsC levels. A software-free anticipation protocol for new molecules is proposed. Over the current set of molecules evaluated, 100% of correct anticipations (resolved and non-resolved compounds) are obtained, while anticipation of some compounds remains undetermined. A criterion is introduced to alert on compounds which should not be anticipated. Copyright © 2016 Elsevier B.V. All rights reserved.

IYPT problems teach high school students about teamwork and the scientific method

NASA Astrophysics Data System (ADS)

Kochanski, K.; Klishin, A.

2015-12-01

Laboratory work is often STEM students' primary exposure to key creative and communicative skills in the sciences, including experimental design, trouble shooting, team work, and oral presentations. The International Young Physicists' Tournament (IYPT) teaches these skills by inviting high school students to investigate simple unsolved systems instead of reproducing familiar results. Students work in teams to form hypotheses, gather data, and present their results orally in a tournament format. The IYPT has published 17 questions yearly since 1988, and its archives are an efficient source of experimental problems for outreach programs and have also been used for first-year undergraduate project classes (Planisic, 2009). We present insights and outcomes from two schools in which we introduced a new extracurricular program based on the IYPT model. Twenty-four students worked in small teams for three hours per day for six weeks. Surprisingly, most teams chose problems in unfamiliar subject areas such as fluid dynamics, and tailored their approaches to take advantage of individual skills including soldering, photography, and theoretical analysis. As the program progressed, students developed an increasingly intuitive understanding of the scientific method. They began to discuss the repeatability of their experiments without prompting, and were increasingly willing to describe alternative hypotheses.

Learning in depth with the bespoke rubric-supported online poster presentation

NASA Astrophysics Data System (ADS)

Lajevardipour, Alireza; Wood, Andrew

2017-08-01

In our course of Biomedical Imaging, we introduced a research project as an assignment that included an online poster presentation. To assess the assignment, an adjusted criteria sheet was created, where it facilitated providing students with an effective feedback linked to particular criteria. Students are expected to produce a scientific poster to present the result of their investigation and upload it to an online discussion board. In addition, they are required to read their colleagues' works and provide peer-feedback by asking quality questions about principles and results, also on-line. Subtle distribution of marks in the rubric balances focus between preparing poster and providing peer-feedbacks.

Health requirements for advanced coal extraction systems

NASA Technical Reports Server (NTRS)

Zimmerman, W. F.

1980-01-01

Health requirements were developed as long range goals for future advanced coal extraction systems which would be introduced into the market in the year 2000. The goal of the requirements is that underground coal miners work in an environment that is as close as possible to the working conditions of the general population, that they do not exceed mortality and morbidity rates resulting from lung diseases that are comparable to those of the general population, and that their working conditions comply as closely as possible to those of other industries as specified by OSHA regulations. A brief technique for evaluating whether proposed advanced systems meet these safety requirements is presented, as well as a discussion of the costs of respiratory disability compensation.

[Theoretical and methodological bases for formation of future drivers 'readiness to application of physical-rehabilitation technologies].

PubMed

Yemets, Anatoliy V; Donchenko, Viktoriya I; Scrinick, Eugenia O

2018-01-01

Introduction: Experimental work is aimed at introducing theoretical and methodological foundations for the professional training of the future doctor. The aim: Identify the dynamics of quantitative and qualitative indicators of the readiness of a specialist in medicine. Materials and methods: The article presents the course and results of the experimental work of the conditions of forming the readiness of future specialists in medicine. Results: Our methodical bases for studying the disciplines of the general practice and specialized professional stage of experimental training of future physicians have been worked out. Conclusions: It is developed taking into account the peculiarities of future physician training of materials for various stages of experimental implementation in the educational process of higher medical educational institutions.

Holographic Symmetries and Generalized Order Parameters for Topological Matter

NASA Astrophysics Data System (ADS)

Cobanera, Emilio; Ortiz, Gerardo; Nussinov, Zohar

2013-03-01

We introduce a universally applicable method, based on the bond-algebraic theory of dualities, to search for generalized order parameters in a wide variety of non-Landau systems, including topologically ordered matter. To this end we introduce the key notion of holographic symmetry. It reflects situations in which global symmetries become exact boundary symmetries under a duality mapping. Holographic symmetries are naturally related to edge modes and localization. The utility of our approach is illustrated by presenting a systematic derivation of generalized order parameters for pure and matter-coupled Abelian gauge theories and (extended) toric codes. Also we introduce a many-body extension of the Kitaev wire, the gauged Kitaev wire, and exploit holographic symmetries and dualities to describe its phase diagram, generalized order parameter, and edge states. [arXiv:1211.0564] This work was supported by the Dutch Science Foundation NWO/FOM and an ERC Advanced Investigator grant, and, in part, under grants No. NSF PHY11-25915 and CMMT 1106293.

Secured independent tools in peritoneoscopy.

PubMed

Tsin, Daniel A; Davila, Fausto; Dominguez, Guillermo; Manolas, Panagiotis

2010-01-01

Secured independent tools are being introduced to aid in peritoneoscopy. We present a simple technique for anchoring instruments, powered lights, and micro machines through the abdominal wall. We used a laparoscopic trainer, micro alligator clips with one or two 2-0 nylon tails and cables for engines and lights. The above instruments were introduced via a 12-mm or 15-mm port. Clips were placed for traction, retraction and exposure, lights for illumination, and motors for potential work. A laparoscopy port closure or suture passer was introduced percutaneously to grab and extract the tails or cables outside of the simulated abdominal cavity. The engines and lights were powered by a direct electric current (DC) plugged into exteriorized cables. We used 2 to 3 clips for each, and engines performed well. This basic simulation adds independent instruments, lights, and engines. We replaced cannulas with threads or cables in an attempt to limit the number of ports. This technique further opens the door for innovations in wired machines in laparoscopy, single-port laparoscopy, or natural orifice surgery.

Tuning the acid/base properties of nanocarbons by functionalization via amination.

PubMed

Arrigo, Rosa; Hävecker, Michael; Wrabetz, Sabine; Blume, Raoul; Lerch, Martin; McGregor, James; Parrott, Edward P J; Zeitler, J Axel; Gladden, Lynn F; Knop-Gericke, Axel; Schlögl, Robert; Su, Dang Sheng

2010-07-21

The surface chemical properties and the electronic properties of vapor grown carbon nanofibers (VGCNFs) have been modified by treatment of the oxidized CNFs with NH(3). The effect of treatment temperature on the types of nitrogen functionalities introduced was evaluated by synchrotron based X-ray photoelectron spectroscopy (XPS), while the impact of the preparation methods on the surface acid-base properties was investigated by potentiometric titration, microcalorimetry, and zeta potential measurements. The impact of the N-functionalization on the electronic properties was measured by THz-Time Domain spectroscopy. The samples functionalized via amination are characterized by the coexistence of acidic and basic O and N sites. The population of O and N species is temperature dependent. In particular, at 873 K nitrogen is stabilized in substitutional positions within the graphitic structure, as heterocyclic-like moieties. The surface presents heterogeneously distributed and energetically different basic sites. A small amount of strong basic sites gives rise to a differential heat of CO(2) adsorption of 150 kJ mol(-1). However, when functionalization is carried out at 473 K, nitrogen moieties with basic character are introduced and the maximum heat of adsorption is significantly lower, at approximately 90 kJ mol(-1). In the latter sample, energetically different basic sites coexist with acidic oxygen groups introduced during the oxidative step. Under these conditions, a bifunctional acidic and basic surface is obtained with high hydrophilic character. N-functionalization carried out at higher temperature changes the electronic properties of the CNFs as evaluated by THz-TDS. The functionalization procedure presented in this work allows high versatility and flexibility in tailoring the surface chemistry of nanocarbon material to specific needs. This work shows the potential of the N-containing nanocarbon materials obtained via amination in catalysis as well as electronic device materials.

Using automatic generation of Labanotation to protect folk dance

NASA Astrophysics Data System (ADS)

Wang, Jiaji; Miao, Zhenjiang; Guo, Hao; Zhou, Ziming; Wu, Hao

2017-01-01

Labanotation uses symbols to describe human motion and is an effective means of protecting folk dance. We use motion capture data to automatically generate Labanotation. First, we convert the motion capture data of the biovision hierarchy file into three-dimensional coordinate data. Second, we divide human motion into element movements. Finally, we analyze each movement and find the corresponding notation. Our work has been supervised by an expert in Labanotation to ensure the correctness of the results. At present, the work deals with a subset of symbols in Labanotation that correspond to several basic movements. Labanotation contains many symbols and several new symbols may be introduced for improvement in the future. We will refine our work to handle more symbols. The automatic generation of Labanotation can greatly improve the work efficiency of documenting movements. Thus, our work will significantly contribute to the protection of folk dance and other action arts.

The ability of non-computer tasks to increase biomechanical exposure variability in computer-intensive office work.

PubMed

Barbieri, Dechristian França; Srinivasan, Divya; Mathiassen, Svend Erik; Nogueira, Helen Cristina; Oliveira, Ana Beatriz

2015-01-01

Postures and muscle activity in the upper body were recorded from 50 academics office workers during 2 hours of normal work, categorised by observation into computer work (CW) and three non-computer (NC) tasks (NC seated work, NC standing/walking work and breaks). NC tasks differed significantly in exposures from CW, with standing/walking NC tasks representing the largest contrasts for most of the exposure variables. For the majority of workers, exposure variability was larger in their present job than in CW alone, as measured by the job variance ratio (JVR), i.e. the ratio between min-min variabilities in the job and in CW. Calculations of JVRs for simulated jobs containing different proportions of CW showed that variability could, indeed, be increased by redistributing available tasks, but that substantial increases could only be achieved by introducing more vigorous tasks in the job, in casu illustrated by cleaning.

A stable wireless energy transmission system for gastrointestinal microsystems.

PubMed

Xin, W H; Yan, G Z; Wang, W X

2010-01-01

A wireless energy transmission system using a Helmholtz primary coil outside and a 3-dimensional secondary coil inside the body is introduced. It is designed to transmit stable power to a gastrointestinal microsystem regardless of its position and orientation when working in the gastric tract. Up to 310 mW of usable DC power can be delivered under worst-case geometrical conditions. Measured data of the system performance are presented and evaluated.

Privacy and Biometric Passports

PubMed Central

Vakalis, Ioannis

2011-01-01

This work deals with privacy implications and threats that can emerge with the large-scale use of electronic biometric documents, such the recently introduced electronic passport (e-Passport). A brief introduction to privacy and personal data protection is followed by a presentation of the technical characteristics of the e-Passport. The description includes the digital data structure, and the communication and reading mechanisms of the e-Passport, indicating the possible points and methods of attack. PMID:21380483

Structure and Distribution of Components in the Working Layer Upon Reconditioning of Parts by Electric-Arc Metallization

NASA Astrophysics Data System (ADS)

Skoblo, T. S.; Vlasovets, V. M.; Moroz, V. V.

2001-11-01

Reliable data on the structure of the deposited layer are very important due to the considerable instability of the process of deposition of coatings by the method of electric-arc metallization and the strict requirements for reconditioned crankshafts. The present paper is devoted to the structure of coatings obtained from powder wire based on ferrochrome-aluminum with additional alloying elements introduced into the charge.

[Present-day metal-cutting tools and working conditions].

PubMed

Kondratiuk, V P

1990-01-01

Polyfunctional machine-tools of a processing centre type are characterized by a set of hygienic advantages as compared to universal machine-tools. But low degree of mechanization and automation of some auxiliary processes, and constructional defects which decrease the ergonomic characteristics of the tools, involve labour intensity in multi-machine processing. The article specifies techniques of allowable noise level assessment, and proposes hygienic recommendations, some of which have been introduced into practice.

Working through. A process of restitution.

PubMed

Gottesman, D M

A number of authors, including Freud, have written about the process of working through but have left unsettled what is actually involved. I have attempted to outline the step-by-step process of working through, starting with recollection and repetition and ending with restitution and resolution. I have introduced the term restitution in order to give more importance to an already existing step in the working-throught process; it should not be looked upon as an artificial device. Restitution allows the patient to find appropriate gratification in present reality, and this helps him to relinquish the past. Rather than allowing the patient to "wallow in the muck of guilt," as Eveoleen Rexford suggests society "wallows" in its inability to help its children, restitution gives appropriate direction for change. It is a natural step in the successful resolution of treatment.

Supporting Interactive Teaching Methods at the New Faculty Workshop with Astronomy Lecture-Tutorials

NASA Astrophysics Data System (ADS)

Slater, T. F.; Brissenden, G.; Duestua, S.; Prather, E. E.

2004-05-01

Ongoing research by the Conceptual Astronomy and Physics Education Research (CAPER) Team at the University of Arizona Steward Observatory suggests that, although faculty realize that lecture-based instruction is ineffective for many students, they are not aware of what interactive teaching strategies are available, particularly for large enrollment courses. A major emphasis of the AAPT/AAS New Faculty Workshop was to introduce faculty to effective active-learning strategies based on an understanding of how people learn. Faculty were introduced to think-pair-share methods where students work together to explain difficult concepts to each other. Faculty were also introduced to authentic assessment strategies that go beyond using traditional multiple-choice tests. In particular, faculty were introduced to Lecture-Tutorials for Introductory Astronomy. The Lecture-Tutorials are instructional materials intended for use with collaborative student learning groups and are designed specifically to be easily integrated into existing courses centered on conventional lectures and do not require any outside equipment or a drastic course revision for implementation. The materials are based on research into student beliefs and reasoning difficulties and use effective instructional strategies that center on student learning. Each workshop presentation was complimented by a follow-up small group discussion session.

[Exploration of Recent Mobile Technologies Applied in Nursing Education].

PubMed

Wu, Ting-Ting; Lu, Yi-Chen; Chang, Lei

2017-12-01

The development of science and technology has fundamentally changed people's lives and the way that medical systems function. Increasingly, mobile technologies are being introduced and integrated into classroom teaching and clinical applications, resulting in healthcare providers introducing innovative applications into health education. These applications enhance the clinical, education, and research expertise of medical staffs and nurses, while improving quality of care and providing new experiences for patients. In order to understand the current situation and trends in nursing education, the present study adopted literature analysis to explore the influence and effect of mobile technologies that have been introduced into nursing education from the school and clinical environments. The results found that students hold positive attitudes toward introducing these technologies into their curricula. Although these technologies may increase the work efficiency of nurses in the workplace, questions remain user perceptions and professional expression. Therefore, securing patient agreement and healthcare system approval were major turning points in the introduction of mobile technologies into nursing education. In the future, adapting mobile technologies for use in teaching materials and courses may be further developed. Moreover, empirical studies may be used in future research in order to facilitate the increasingly successful integration of relevant technologies into nursing education.

Principal coordinate analysis assisted chromatographic analysis of bacterial cell wall collection: A robust classification approach.

PubMed

Kumar, Keshav; Cava, Felipe

2018-04-10

In the present work, Principal coordinate analysis (PCoA) is introduced to develop a robust model to classify the chromatographic data sets of peptidoglycan sample. PcoA captures the heterogeneity present in the data sets by using the dissimilarity matrix as input. Thus, in principle, it can even capture the subtle differences in the bacterial peptidoglycan composition and can provide a more robust and fast approach for classifying the bacterial collection and identifying the novel cell wall targets for further biological and clinical studies. The utility of the proposed approach is successfully demonstrated by analysing the two different kind of bacterial collections. The first set comprised of peptidoglycan sample belonging to different subclasses of Alphaproteobacteria. Whereas, the second set that is relatively more intricate for the chemometric analysis consist of different wild type Vibrio Cholerae and its mutants having subtle differences in their peptidoglycan composition. The present work clearly proposes a useful approach that can classify the chromatographic data sets of chromatographic peptidoglycan samples having subtle differences. Furthermore, present work clearly suggest that PCoA can be a method of choice in any data analysis workflow. Copyright © 2018 Elsevier Inc. All rights reserved.

"There aren't any gays here": encountering heteroprofessionalism in an international development workplace.

PubMed

Mizzi, Robert C

2013-01-01

Western-oriented workplaces use professionalism as a normative value to sustain and promote a cohesive work environment. Yet, through this qualitative study, the author points out some implications of using professionalism to manage staff relationships and behaviors. Using post-conflict Kosovo as the context, the author examined (a) the work experiences of 8 gay male aid workers and (b) the attitudes toward homosexuality of foreign staff members in 2 international aid agencies. The author introduces and suggests heteroprofessionalism as a root to homophobic and heterosexist behaviors present in the study. Heteroprofessionalism is defined as a professional value that screens out homosexuality.

Ant algorithms for discrete optimization.

PubMed

Dorigo, M; Di Caro, G; Gambardella, L M

1999-01-01

This article presents an overview of recent work on ant algorithms, that is, algorithms for discrete optimization that took inspiration from the observation of ant colonies' foraging behavior, and introduces the ant colony optimization (ACO) metaheuristic. In the first part of the article the basic biological findings on real ants are reviewed and their artificial counterparts as well as the ACO metaheuristic are defined. In the second part of the article a number of applications of ACO algorithms to combinatorial optimization and routing in communications networks are described. We conclude with a discussion of related work and of some of the most important aspects of the ACO metaheuristic.

Implementing Mobile Phone Solutions for Health in Resource Constrained Areas: Understanding the Opportunities and Challenges

NASA Astrophysics Data System (ADS)

Manda, Tiwonge Davis; Herstad, Jo

This paper presents results from a study on mobile phone use to connect two rural hospitals in Malawi with community health workers (CHWs), the hospitals work with. Mobile phone use at the hospitals has helped reduce the need for face-to-face communication to permit patient information exchange, meetings and appointments scheduling, as well as work coordination. On the other hand mobile phone use has proved paradoxical as it has introduced users to challenges, like recharging of phone batteries, they did not anticipate. The paper highlights use context-centric and solution based opportunities and challenges associated with mobile phone use in rural settings.

Real-time quantitative fluorescence imaging using a single snapshot optical properties technique for neurosurgical guidance

NASA Astrophysics Data System (ADS)

Valdes, Pablo A.; Angelo, Joseph; Gioux, Sylvain

2015-03-01

Fluorescence imaging has shown promise as an adjunct to improve the extent of resection in neurosurgery and oncologic surgery. Nevertheless, current fluorescence imaging techniques do not account for the heterogeneous attenuation effects of tissue optical properties. In this work, we present a novel imaging system that performs real time quantitative fluorescence imaging using Single Snapshot Optical Properties (SSOP) imaging. We developed the technique and performed initial phantom studies to validate the quantitative capabilities of the system for intraoperative feasibility. Overall, this work introduces a novel real-time quantitative fluorescence imaging method capable of being used intraoperatively for neurosurgical guidance.

Mechanisation and automation technologies development in work at construction sites

NASA Astrophysics Data System (ADS)

Sobotka, A.; Pacewicz, K.

2017-10-01

Implementing construction work that creates buildings is a very complicated and laborious task and requires the use of various types of machines and equipment. For years there has been a desire for designers and technologists to introduce devices that replace people’s work on machine construction, automation and even robots. Technologies for building construction are still being developed and implemented to limit people’s hard work and improve work efficiency and quality in innovative architectonical and construction solutions. New opportunities for improving work on the construction site include computerisation of technological processes and construction management for projects and processes. The aim of the paper was to analyse the development of mechanisation, automation and computerisation of construction processes and selected building technologies, with special attention paid to 3D printing technology. The state of mechanisation of construction works in Poland and trends in its development in construction technologies are presented. These studies were conducted on the basis of the available literature and a survey of Polish construction companies.

[Information technology and hospital care: reflection on the meaning of the work].

PubMed

Fonseca, Cláudia Maria Barboza Machado; dos Santos, Mônica Loureiro

2007-01-01

The purpose of this paper is to present the experience of nurses since the introduction of information technology in hospital work processes. It analyzes the meaning of information technology within the subjectivity and perception of healthcare in nursing work in a general hospital. As a theoretical background, it takes studies of work psychodynamics/psychopathology, referred to healthcare work processes and their repercussions on worker health. This qualitative inquiry strives to understand the significance of this subject in nursing routines. The field research was based on semi-structured interviews and non-systematic observation of some nursing activities, noting some resistance to change among the nurses, with difficulties in organizing the work and introducing them to new ways of handling their tasks. Faced by a machine, they feel trapped and isolated. This leads to the conclusion that the implementation of information technology interferes significantly in the work processes of the nurses participating in this study, and may adversely affect their health in the future.

Exploiting data representation for fault tolerance

DOE PAGES

Hoemmen, Mark Frederick; Elliott, J.; Sandia National Lab.; ...

2015-01-06

Incorrect computer hardware behavior may corrupt intermediate computations in numerical algorithms, possibly resulting in incorrect answers. Prior work models misbehaving hardware by randomly flipping bits in memory. We start by accepting this premise, and present an analytic model for the error introduced by a bit flip in an IEEE 754 floating-point number. We then relate this finding to the linear algebra concepts of normalization and matrix equilibration. In particular, we present a case study illustrating that normalizing both vector inputs of a dot product minimizes the probability of a single bit flip causing a large error in the dot product'smore » result. Moreover, the absolute error is either less than one or very large, which allows detection of large errors. Then, we apply this to the GMRES iterative solver. We count all possible errors that can be introduced through faults in arithmetic in the computationally intensive orthogonalization phase of GMRES, and show that when the matrix is equilibrated, the absolute error is bounded above by one.« less

Quantum Jarzynski equality of measurement-based work extraction

NASA Astrophysics Data System (ADS)

Morikuni, Yohei; Tajima, Hiroyasu; Hatano, Naomichi

2017-03-01

Many studies of quantum-size heat engines assume that the dynamics of an internal system is unitary and that the extracted work is equal to the energy loss of the internal system. Both assumptions, however, should be under scrutiny. In the present paper, we analyze quantum-scale heat engines, employing the measurement-based formulation of the work extraction recently introduced by Hayashi and Tajima [M. Hayashi and H. Tajima, arXiv:1504.06150]. We first demonstrate the inappropriateness of the unitary time evolution of the internal system (namely, the first assumption above) using a simple two-level system; we show that the variance of the energy transferred to an external system diverges when the dynamics of the internal system is approximated to a unitary time evolution. Second, we derive the quantum Jarzynski equality based on the formulation of Hayashi and Tajima as a relation for the work measured by an external macroscopic apparatus. The right-hand side of the equality reduces to unity for "natural" cyclic processes but fluctuates wildly for noncyclic ones, exceeding unity often. This fluctuation should be detectable in experiments and provide evidence for the present formulation.

Quantum Jarzynski equality of measurement-based work extraction.

PubMed

Morikuni, Yohei; Tajima, Hiroyasu; Hatano, Naomichi

2017-03-01

Many studies of quantum-size heat engines assume that the dynamics of an internal system is unitary and that the extracted work is equal to the energy loss of the internal system. Both assumptions, however, should be under scrutiny. In the present paper, we analyze quantum-scale heat engines, employing the measurement-based formulation of the work extraction recently introduced by Hayashi and Tajima [M. Hayashi and H. Tajima, arXiv:1504.06150]. We first demonstrate the inappropriateness of the unitary time evolution of the internal system (namely, the first assumption above) using a simple two-level system; we show that the variance of the energy transferred to an external system diverges when the dynamics of the internal system is approximated to a unitary time evolution. Second, we derive the quantum Jarzynski equality based on the formulation of Hayashi and Tajima as a relation for the work measured by an external macroscopic apparatus. The right-hand side of the equality reduces to unity for "natural" cyclic processes but fluctuates wildly for noncyclic ones, exceeding unity often. This fluctuation should be detectable in experiments and provide evidence for the present formulation.

Equity and working time: a challenge to achieve.

PubMed

Fischer, Frida Marina; Rotenberg, Lúcia; de Castro Moreno, Claudia Roberta

2004-01-01

Equity is a humanitarian issue that gained strength during the transition from the 20th to the 21st century due to the mounting global discussion and social crisis involving human rights, health, and work. This article aims at (1) introducing the concept of equity as it applies to work environments, particularly to situations involving demanding work schedules, (2) discussing the role of science in equity issues related to work, (3) introducing a new scientific society dedicated to working-time issues, and (4) presenting an overview of new research on working time and health as addressed by the series of manuscripts published in this special issue of Chronobiology International devoted to the XVIth International Symposium on Night and Shiftwork, held in Santos, Brazil, November 2003. The concept of equity has a political as a well as a scientific dimension. Many worldwide organizations, e.g., civil society, academia, and occupational health research institutions, advocate prompt actions toward equity as a strategy to attain sustainable development and to reduce poverty. The analyses of current tendencies in work settings reveal a general situation of disrespect for equity principles, which is expressed by heavy workloads, long work hours, poor work conditions, and deregulation of established labor laws, mainly in (but not restricted to) developing countries. In spite of the great contribution of science in the past five decades, obstacles stand in the way of effectively improving good working conditions, particularly in times of precarious employment. The Working Time Society is a new scientific society that aims at promoting research into working time and health and offers practical advice on how to minimize adverse effects of working hours on workers' health and well-being. An updated view of the research on working times and health includes studies on the relationship between work schedules, worker health, and well-being; effects of night and shiftwork on the internal synchronization of circadian rhythms and laboratory and field interventions; new methods of investigation or new approaches in shift-work studies; and prediction of risks in night and shift work. Current tendencies of work organization contribute to the amplification of inequality across groups and populations, revealing that equity remains a challenge to achieve.

@neurIST - chronic disease management through integration of heterogeneous data and computer-interpretable guideline services.

PubMed

Dunlop, R; Arbona, A; Rajasekaran, H; Lo Iacono, L; Fingberg, J; Summers, P; Benkner, S; Engelbrecht, G; Chiarini, A; Friedrich, C M; Moore, B; Bijlenga, P; Iavindrasana, J; Hose, R D; Frangi, A F

2008-01-01

This paper presents an overview of computerised decision support for clinical practice. The concept of computer-interpretable guidelines is introduced in the context of the @neurIST project, which aims at supporting the research and treatment of asymptomatic unruptured cerebral aneurysms by bringing together heterogeneous data, computing and complex processing services. The architecture is generic enough to adapt it to the treatment of other diseases beyond cerebral aneurysms. The paper reviews the generic requirements of the @neurIST system and presents the innovative work in distributing executable clinical guidelines.

An improved method for piezoelectric characterization of polymers for energy harvesting applications

NASA Astrophysics Data System (ADS)

Gusarova, E.; Gusarov, B.; Zakharov, D.; Bousquet, M.; Viala, B.; Cugat, O.; Delamare, J.; Gimeno, L.

2013-12-01

This work presents an improved method for measuring the direct piezoelectric voltage and energy of flexible polymers. Well-controlled stress is applied with a four-point bending system and voltage is measured in real open-circuit conditions. The presented method separates the piezoelectric part from the measurement part by introducing a mechanical switch, allowing instantaneous post-deformation discharge measurements. Oscilloscope and contact-less electrostatic voltmeter are compared. Direct piezoelectric measurements under open-circuit conditions have been performed on commercial PVDF (polyvinylidene fluoride) and its copolymers. Significant differences to data sheet values (close-circuit conditions) are reported and commented.

The Main Biological Hazards in Animal Biosafety Level 2 Facilities and Strategies for Control.

PubMed

Li, Xiao Yan; Xue, Kang Ning; Jiang, Jin Sheng; Lu, Xuan Cheng

2016-04-01

Concern about the biological hazards involved in microbiological research, especially research involving laboratory animals, has increased in recent years. Working in an animal biosafety level 2 facility (ABSL-2), commonly used for research on infectious diseases, poses various biological hazards. Here, the regulations and standards related to laboratory biosafety in China are introduced, the potential biological hazards present in ABSL-2 facilities are analyzed, and a series of strategies to control the hazards are presented. Copyright © 2016 The Editorial Board of Biomedical and Environmental Sciences. Published by China CDC. All rights reserved.

LCFIPlus: A framework for jet analysis in linear collider studies

NASA Astrophysics Data System (ADS)

Suehara, Taikan; Tanabe, Tomohiko

2016-02-01

We report on the progress in flavor identification tools developed for a future e+e- linear collider such as the International Linear Collider (ILC) and Compact Linear Collider (CLIC). Building on the work carried out by the LCFIVertex collaboration, we employ new strategies in vertex finding and jet finding, and introduce new discriminating variables for jet flavor identification. We present the performance of the new algorithms in the conditions simulated using a detector concept designed for the ILC. The algorithms have been successfully used in ILC physics simulation studies, such as those presented in the ILC Technical Design Report.

Cultural Astronomy in Elementary and Secondary School

NASA Astrophysics Data System (ADS)

Jafelice, Luiz Carlos

2015-07-01

This work is addressed to educators and geography, science, biology and physics teachers who deal with elementary, middle and high school education. It discusses the importance of adopting the anthropological perspective regarding issues that are considered within the astronomy area. It also presents practical proposals for those who intend to introduce cultural astronomy in elementary, middle and high school education - from the beginning of the 1st grade in Elementary school to the end of the 3rd grade in Secondary school, in formal as well as in informal education. This work is proposed within the context of the holistic and transdisciplinary environmental education. Our approach values above all the experience and aims at a humanistic education that includes epistemological and cultural diversities. The suggested practical proposals can be also beneficially used to address works that include contents related to Brazilian indigenous and Afro-descent cultures in the school curriculum, as the new law requires. The guidelines presented here were tested in real school situations.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scholtz, Jean

A new field of research, visual analytics, has recently been introduced. This has been defined as “the science of analytical reasoning facilitated by visual interfaces." Visual analytic environments, therefore, support analytical reasoning using visual representations and interactions, with data representations and transformation capabilities, to support production, presentation and dissemination. As researchers begin to develop visual analytic environments, it will be advantageous to develop metrics and methodologies to help researchers measure the progress of their work and understand the impact their work will have on the users who will work in such environments. This paper presents five areas or aspects ofmore » visual analytic environments that should be considered as metrics and methodologies for evaluation are developed. Evaluation aspects need to include usability, but it is necessary to go beyond basic usability. The areas of situation awareness, collaboration, interaction, creativity, and utility are proposed as areas for initial consideration. The steps that need to be undertaken to develop systematic evaluation methodologies and metrics for visual analytic environments are outlined.« less

[The role of art therapy in the rehabilitation of psycho-socially disabled people].

PubMed

Simon, Lajos; Kovács, Emese

2015-01-01

The present review focuses on the generally accepted and applied community psychiatry based models of psycho-social rehabilitation. The basics of the Strenghts model and the Recovery based model are introduced in this paper. Both models can be assisted by art therapy in various ways. The forms and the therapeutic factors of art therapy are also discussed, as well as the effects of the creating experience during the art therapy sessions. The authors introduce the good practice of the Moravcsik Foundation with highlights in two special areas that are beyond the generally applied art therapy work and representing important support in reaching the goals set during the rehabilitation process. Further, the authors describe the Budapest Art Brut Gallery and the PsychArt24 art marathon project in details.

Fast and accurate automated cell boundary determination for fluorescence microscopy

NASA Astrophysics Data System (ADS)

Arce, Stephen Hugo; Wu, Pei-Hsun; Tseng, Yiider

2013-07-01

Detailed measurement of cell phenotype information from digital fluorescence images has the potential to greatly advance biomedicine in various disciplines such as patient diagnostics or drug screening. Yet, the complexity of cell conformations presents a major barrier preventing effective determination of cell boundaries, and introduces measurement error that propagates throughout subsequent assessment of cellular parameters and statistical analysis. State-of-the-art image segmentation techniques that require user-interaction, prolonged computation time and specialized training cannot adequately provide the support for high content platforms, which often sacrifice resolution to foster the speedy collection of massive amounts of cellular data. This work introduces a strategy that allows us to rapidly obtain accurate cell boundaries from digital fluorescent images in an automated format. Hence, this new method has broad applicability to promote biotechnology.

Introducing contemporary shift patterns in a hospice setting.

PubMed

Greene, Kay

For many nurses, quality of life is dependent on the balance of work and home life. Registered, skilled and experienced nurses are necessary to ensure that a high-quality service is provided. The hospice recognised that its main asset in providing such a service is its nursing workforce. This article describes how the hospice introduced new working patterns for nursing staff.

Introducing a new semi-active engine mount using force controlled variable stiffness

NASA Astrophysics Data System (ADS)

Azadi, Mojtaba; Behzadipour, Saeed; Faulkner, Gary

2013-05-01

This work introduces a new concept in designing semi-active engine mounts. Engine mounts are under continuous development to provide better and more cost-effective engine vibration control. Passive engine mounts do not provide satisfactory solution. Available semi-active and active mounts provide better solutions but they are more complex and expensive. The variable stiffness engine mount (VSEM) is a semi-active engine mount with a simple ON-OFF control strategy. However, unlike available semi-active engine mounts that work based on damping change, the VSEM works based on the static stiffness change by using a new fast response force controlled variable spring. The VSEM is an improved version of the vibration mount introduced by the authors in their previous work. The results showed significant performance improvements over a passive rubber mount. The VSEM also provides better vibration control than a hydromount at idle speed. Low hysteresis and the ability to be modelled by a linear model in low-frequency are the advantages of the VSEM over the vibration isolator introduced earlier and available hydromounts. These specifications facilitate the use of VSEM in the automotive industry, however, further evaluation and developments are needed for this purpose.

Can We Talk through a Robot As if Face-to-Face? Long-Term Fieldwork Using Teleoperated Robot for Seniors with Alzheimer's Disease.

PubMed

Kuwamura, Kaiko; Nishio, Shuichi; Sato, Shinichi

2016-01-01

This work presents a case study on fieldwork in a group home for the elderly with dementia using a teleoperated robot called Telenoid. We compared Telenoid-mediated and face-to-face conditions with three residents with Alzheimer's disease (AD). The result indicates that two of the three residents with moderate AD showed a positive reaction to Telenoid. Both became less nervous while communicating with Telenoid from the time they were first introduced to it. Moreover, they started to use more body gestures in the face-to-face condition and more physical interactions in the Telenoid-mediated condition. In this work, we present all the results and discuss the possibilities of using Telenoid as a tool to provide opportunities for seniors to communicate over the long term.

UNFOLD-SENSE: a parallel MRI method with self-calibration and artifact suppression.

PubMed

Madore, Bruno

2004-08-01

This work aims at improving the performance of parallel imaging by using it with our "unaliasing by Fourier-encoding the overlaps in the temporal dimension" (UNFOLD) temporal strategy. A self-calibration method called "self, hybrid referencing with UNFOLD and GRAPPA" (SHRUG) is presented. SHRUG combines the UNFOLD-based sensitivity mapping strategy introduced in the TSENSE method by Kellman et al. (5), with the strategy introduced in the GRAPPA method by Griswold et al. (10). SHRUG merges the two approaches to alleviate their respective limitations, and provides fast self-calibration at any given acceleration factor. UNFOLD-SENSE further includes an UNFOLD artifact suppression scheme to significantly suppress artifacts and amplified noise produced by parallel imaging. This suppression scheme, which was published previously (4), is related to another method that was presented independently as part of TSENSE. While the two are equivalent at accelerations < or = 2.0, the present approach is shown here to be significantly superior at accelerations > 2.0, with up to double the artifact suppression at high accelerations. Furthermore, a slight modification of Cartesian SENSE is introduced, which allows departures from purely Cartesian sampling grids. This technique, termed variable-density SENSE (vdSENSE), allows the variable-density data required by SHRUG to be reconstructed with the simplicity and fast processing of Cartesian SENSE. UNFOLD-SENSE is given by the combination of SHRUG for sensitivity mapping, vdSENSE for reconstruction, and UNFOLD for artifact/amplified noise suppression. The method was implemented, with online reconstruction, on both an SSFP and a myocardium-perfusion sequence. The results from six patients scanned with UNFOLD-SENSE are presented.

The pearls of using real-world evidence to discover social groups

NASA Astrophysics Data System (ADS)

Cardillo, Raymond A.; Salerno, John J.

2005-03-01

In previous work, we introduced a new paradigm called Uni-Party Data Community Generation (UDCG) and a new methodology to discover social groups (a.k.a., community models) called Link Discovery based on Correlation Analysis (LDCA). We further advanced this work by experimenting with a corpus of evidence obtained from a Ponzi scheme investigation. That work identified several UDCG algorithms, developed what we called "Importance Measures" to compare the accuracy of the algorithms based on ground truth, and presented a Concept of Operations (CONOPS) that criminal investigators could use to discover social groups. However, that work used a rather small random sample of manually edited documents because the evidence contained far too many OCR and other extraction errors. Deferring the evidence extraction errors allowed us to continue experimenting with UDCG algorithms, but only used a small fraction of the available evidence. In attempt to discover techniques that are more practical in the near-term, our most recent work focuses on being able to use an entire corpus of real-world evidence to discover social groups. This paper discusses the complications of extracting evidence, suggests a method of performing name resolution, presents a new UDCG algorithm, and discusses our future direction in this area.

Design of smart prosthetic knee utilizing magnetorheological damper

NASA Astrophysics Data System (ADS)

Gao, F.; Liu, Y. N.; Liao, W. H.

2017-04-01

In this study, based on human knee's kinetics, a smart prosthetic knee employing springs, DC motor and magnetorheological (MR) damper is designed. The MR damper is coupled in series with the springs that are mounted in parallel with the DC motor. The working principle of the prosthesis during level-ground walking is presented. During stance phase, the MR damper is powered on. The springs will store and release the negative mechanical energy for restoring the function of human knee joint. In swing phase, the MR damper is powered off for disengaging the springs. In this phase, the work of knee joint is negative. For improving the system energy efficiency, the DC motor will work as a power generator to supply required damping torque and harvest electrical energy. Finally, the design of MR damper is introduced.

Involvement and emancipation of the worker. Action research in a university hospital.

PubMed

Bolis, Ivan; Brunoro, Claudio; Sznelwar, Laerte Idal

2012-01-01

The present action research article is linked to an ergonomics project in a university hospital. The author's proposal is to focus action on the effective worker involvement required for the creation of spaces/mechanisms within organizations where people can enhance cooperation and deliberation on matters relating to work. For this purpose, a committee was introduced to assist in finding problems and solutions directly in work situations, so that workers could experience relative autonomy allowing them to develop procedures and choose tools appropriate to their own real needs. Based on this organizational implementation and on subsequent interviews, the practical results are analyzed and related to employee involvement. One can conclude that workers in all areas of the organization can be active elements for improving working conditions and productivity in companies.

A learning curve-based method to implement multifunctional work teams in the Brazilian footwear sector.

PubMed

Guimarães, L B de M; Anzanello, M J; Renner, J S

2012-05-01

This paper presents a method for implementing multifunctional work teams in a footwear company that followed the Taylor/Ford system for decades. The suggested framework first applies a Learning Curve (LC) modeling to assess whether rotation between tasks of different complexities affects workers' learning rate and performance. Next, the Macroergonomic Work Analysis (MA) method (Guimarães, 1999, 2009) introduces multifunctional principles in work teams towards workers' training and resources improvement. When applied to a pilot line consisting of 100 workers, the intervention-reduced work related accidents in 80%, absenteeism in 45.65%, and eliminated work related musculoskeletal disorders (WMSD), medical consultations, and turnover. Further, the output rate of the multifunctional team increased average 3% compared to the production rate of the regular lines following the Taylor/Ford system (with the same shoe model being manufactured), while the rework and spoilage rates were reduced 85% and 69%, respectively. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Capacity limits in list item recognition: evidence from proactive interference.

PubMed

Cowan, Nelson; Johnson, Troy D; Saults, J Scott

2005-01-01

Capacity limits in short-term recall were investigated using proactive interference (PI) from previous lists in a speeded-recognition task. PI was taken to indicate that the target list length surpassed working memory capacity. Unlike previous studies, words were presented either concurrently or sequentially and a new method was introduced to increase the amount of PI. On average, participants retrieved about four items without PI. We suggest an activation-based account of capacity limits.

High-energy-resolution diced spherical quartz analyzers for resonant inelastic X-ray scattering

DOE PAGES

Said, Ayman H.; Gog, Thomas; Wieczorek, Michael; ...

2018-02-15

A novel diced spherical quartz analyzer for use in resonant inelastic X-ray scattering (RIXS) is introduced, achieving an unprecedented energy resolution of 10.53 meV at the IrL 3absorption edge (11.215 keV). In this work the fabrication process and the characterization of the analyzer are presented, and an example of a RIXS spectrum of magnetic excitations in a Sr 3Ir 2O 7sample is shown.

Modeling of Complex Coupled Fluid-Structure Interaction Systems in Arbitrary Water Depth

DTIC Science & Technology

2009-01-01

basin. For the particle finite- element method ( PFEM ) near-field fluid model we completed: (4) the development of a fully-coupled fluid/flexible...method ( PFEM ) based framework for the ALE-RANS solver [1]. We presented the theory of ALE-RANS with a k- turbulence closure model and several numerical...implemented by PFEM (Task (4)). In this work a universal wall function (UWF) is introduced and implemented to more accurately predict the boundary

Quantitative data standardization of X-ray based densitometry methods

NASA Astrophysics Data System (ADS)

Sergunova, K. A.; Petraikin, A. V.; Petrjajkin, F. A.; Akhmad, K. S.; Semenov, D. S.; Potrakhov, N. N.

2018-02-01

In the present work is proposed the design of special liquid phantom for assessing the accuracy of quantitative densitometric data. Also are represented the dependencies between the measured bone mineral density values and the given values for different X-ray based densitometry techniques. Shown linear graphs make it possible to introduce correction factors to increase the accuracy of BMD measurement by QCT, DXA and DECT methods, and to use them for standardization and comparison of measurements.

The remote controlling technique based on the serial port for SR-620 universal counter

NASA Astrophysics Data System (ADS)

Su, Jian-Feng; Chen, Shu-Fang; Li, Xiao-Hui; Wu, Hai-Tao; Bian, Yu-Jing

2004-12-01

The function of SR-620 universal counter and the remote work mode are introduced, and the remote controlling technique for the counter is analysed. A method to realize the remote controlling via the serial port for the counter is demonstrated, in which an ActiveX control is used. Besides, some points for attention in debugging are discussed based on the experience, and a case of program running for measuring time-delay is presented.

Recent Advances and Current Trends in Metamaterial-by-Design

NASA Astrophysics Data System (ADS)

Anselmi, N.; Gottardi, G.

2018-02-01

Thanks to their potential applications in several engineering areas, metamaterials gained much of attentions among different research communities, leading to the development of several analysis and synthesis tools. In this context, the metamaterial-by-design (MbD) paradigm has been recently introduced as a powerful tool for the design of complex metamaterials-based structures. In this work a review of the state-of-art, as well as the recent advancements of MbD-based methods are presented.

A Structural Characterization of Temporal Dynamic Controllability

NASA Technical Reports Server (NTRS)

Morris, Paul

2006-01-01

An important issue for temporal planners is the ability to handle temporal uncertainty. Recent papers have addressed the question of how to tell whether a temporal network is Dynamically Controllable, i.e., whether the temporal requirements are feasible in the light of uncertain durations of some processes. Previous work has presented an O(N5) algorithm for testing this property. Here, we introduce a new analysis of temporal cycles that leads to an O(N4) algorithm.

WikiSensing: An Online Collaborative Approach for Sensor Data Management

PubMed Central

Silva, Dilshan; Ghanem, Moustafa; Guo, Yike

2012-01-01

This paper presents a new methodology for collaborative sensor data management known as WikiSensing. It is a novel approach that incorporates online collaboration with sensor data management. We introduce the work on this research by describing the motivation and challenges of designing and developing an online collaborative sensor data management system. This is followed by a brief survey on popular sensor data management and online collaborative systems. We then present the architecture for WikiSensing highlighting its main components and features. Several example scenarios are described to present the functionality of the system. We evaluate the approach by investigating the performance of aggregate queries and the scalability of the system. PMID:23201997

Improving performance and happiness among healthcare workers through a body-mind approach in a healthcare setting in Sri Lanka.

PubMed

Gunathunga, M W

2016-10-17

Cognitive ergonomics in the work place has become a serious concern with the need to keep people happy at work while maintaining high productivity. Hence, it is worth exploring how the outcomes of lifestyle-based mind development programs can bring about happiness in workplace while keeping productivity and quality of services high. The objective of the present work was to test a body-mind technique to improve cognitive ergonomics in a health care work setting. Principal investigator explored many body-mind techniques before selecting the present method of "insight meditation" which he mastered before applying it on a group of scholars who made it a part of their lifestyle. Later it was introduced to a sample of 500 volunteer health personnel in the western province to generate a ripple effect of happiness at work. Initial qualitative information indicated improvement of some aspects of cognitive ergonomics among those who practiced it. There was a relief from stress during the practice sessions and improvements in the commitment to work and in team spirit. A demand was observed for further training. A quasi-experimental study to test the improvements is underway. Health workers showed interest in the mind training and potential benefits to individuals and the institutions were observed.

The learning effects of different presentations of worked examples on medical students' breaking-bad-news skills: A randomized and blinded field trial.

PubMed

Schmitz, Felix Michael; Schnabel, Kai Philipp; Bauer, Daniel; Bachmann, Cadja; Woermann, Ulrich; Guttormsen, Sissel

2018-02-24

Effective instructional approaches are needed to enable undergraduates to optimally prepare for the limited training time they receive with simulated patients (SPs). This study examines the learning effects of different presentation formats of a worked example on student SP communication. Sixty-seven fourth-year medical students attending a mandatory communication course participated in this randomized field trial. Prior to the course, they worked through an e-learning module that introduced the SPIKES protocol for delivering bad news to patients. In this module, a single worked example was presented to one group of students in a text version, to a second group in a video version, and to a third group in a video version enriched with text hints denoting the SPIKES steps. The video-with-hints group broke bad news to SPs significantly more appropriately than either of the other groups. Although no further condition-related effects were revealed, students who learned from the text version most frequently (although non-significantly) ignored unpleasant emotions (standardised emotional cues and concerns) expressed by the SPs. The learning effect was strongest when the video-based worked example was accompanied by hints. Video-related learning approaches that embed attention-guiding hints can effectively prepare undergraduates for SP encounters. Copyright © 2018 Elsevier B.V. All rights reserved.

[Results of Training for Personnel Involved in Blood-Transfusion Testing Outside of Regular Work Hours at Saga University Hospital].

PubMed

Yamada, Marie; Yamada, Naotomo; Higashitani, Takanori; Ohta, Shoichiro; Sueoka, Eisaburo

2015-11-01

Laboratory testing prior to blood transfusion outside of regular hours in many hospitals and clinics is frequently conducted by technicians without sufficient experience in such testing work. To obtain consistent test results regardless of the degree of laboratory experience with blood transfusion testing, the number of facilities introducing automated equipment for testing prior to blood transfusion is increasing. Our hospital's blood transfusion department introduced fully automated test equipment in October of 2010 for use when blood transfusions are conducted outside of regular hours. However, excessive dependence on automated testing can lead to an inability to do manual blood typing or cross-match testing when necessitated by breakdowns in the automated test equipment, in the case of abnormal specimen reactions, or other such case. In addition, even outside of normal working hours there are more than a few instances in which transfusion must take place based on urgent communications from clinical staff, with the need for prompt and flexible timing of blood transfusion test and delivery of blood products. To address this situation, in 2010 we began training after-hours laboratory personnel in blood transfusion testing to provide practice using test tubes manually and to achieve greater understanding of blood transfusion test work (especially in cases of critical blood loss). Results of the training and difficulties in its implementation for such after-hours laboratory personnel at our hospital are presented and discussed in this paper. [Original

Some technical implications of Klein's concept of 'premature ego development'.

PubMed

Mitrani, Judith L

2007-08-01

In this paper, the author revisits the problem of 'premature ego development' first introduced by Melanie Klein in 1930. She also highlights several developments in post-Kleinian thinking since the publication of that paper, which can be seen as offshoots of or complements to Klein's work. The author proposes a link between this category of precocious development and the absence of the experience of what Bion termed the 'containing object.' She puts forward several technical considerations relevant to analytic work with patients who suffer as a result of early developmental failures and presents various clinical vignettes in order to demonstrate the ways in which these considerations take shape in the analytic setting.

NNLO corrections to top pair production at hadron colliders: the quark-gluon reaction

NASA Astrophysics Data System (ADS)

Czakon, Michal; Mitov, Alexander

2013-01-01

We compute the next-to-next-to-leading order QCD correction to the total inclusive top pair production cross-section in the reaction qgto toverline{t}+X . We find moderate {O} (1%) correction to central values at both Tevatron and LHC. The scale variation of the cross-section remains unchanged at the Tevatron and is significantly reduced at the LHC. We find that recently introduced approximation based on the high-energy limit of the top pair cross-section significantly deviates from the exact result. The results derived in the present work are included in version 1.4 of the program Top++. Work towards computing the reaction ggto toverline{t}+X is ongoing.

Tunable wideband bandstop acoustic filter based on two-dimensional multiphysical phenomena periodic systems

NASA Astrophysics Data System (ADS)

Romero-García, V.; Sánchez-Pérez, J. V.; Garcia-Raffi, L. M.

2011-07-01

The physical properties of a periodic distribution of absorbent resonators is used in this work to design a tunable wideband bandstop acoustic filter. Analytical and numerical simulations as well as experimental validations show that the control of the resonances and the absorption of the scatterers along with their periodic arrangement in air introduce high technological possibilities to control noise. Sound manipulation is perhaps the most obvious application of the structures presented in this work. We apply this methodology to develop a device as an alternative to the conventional acoustic barriers with several properties from the acoustical point of view but also with additional esthetic and constructive characteristics.

An Alignment Model for Collaborative Value Networks

NASA Astrophysics Data System (ADS)

Bremer, Carlos; Azevedo, Rodrigo Cambiaghi; Klen, Alexandra Pereira

This paper presents parts of the work carried out in several global organizations through the development of strategic projects with high tactical and operational complexity. By investing in long-term relationships, strongly operating in the transformation of the competitive model and focusing on the value chain management, the main aim of these projects was the alignment of multiple value chains. The projects were led by the Axia Transformation Methodology as well as by its Management Model and following the principles of Project Management. As a concrete result of the efforts made in the last years in the Brazilian market this work also introduces the Alignment Model which supports the transformation process that the companies undergo.

Quantum Monte Carlo Calculations Applied to Magnetic Molecules

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engelhardt, Larry

2006-01-01

We have calculated the equilibrium thermodynamic properties of Heisenberg spin systems using a quantum Monte Carlo (QMC) method. We have used some of these systems as models to describe recently synthesized magnetic molecules, and-upon comparing the results of these calculations with experimental data-have obtained accurate estimates for the basic parameters of these models. We have also performed calculations for other systems that are of more general interest, being relevant both for existing experimental data and for future experiments. Utilizing the concept of importance sampling, these calculations can be carried out in an arbitrarily large quantum Hilbert space, while still avoidingmore » any approximations that would introduce systematic errors. The only errors are statistical in nature, and as such, their magnitudes are accurately estimated during the course of a simulation. Frustrated spin systems present a major challenge to the QMC method, nevertheless, in many instances progress can be made. In this chapter, the field of magnetic molecules is introduced, paying particular attention to the characteristics that distinguish magnetic molecules from other systems that are studied in condensed matter physics. We briefly outline the typical path by which we learn about magnetic molecules, which requires a close relationship between experiments and theoretical calculations. The typical experiments are introduced here, while the theoretical methods are discussed in the next chapter. Each of these theoretical methods has a considerable limitation, also described in Chapter 2, which together serve to motivate the present work. As is shown throughout the later chapters, the present QMC method is often able to provide useful information where other methods fail. In Chapter 3, the use of Monte Carlo methods in statistical physics is reviewed, building up the fundamental ideas that are necessary in order to understand the method that has been used in this work. With these ideas in hand, we then provide a detailed explanation of the current QMC method in Chapter 4. The remainder of the thesis is devoted to presenting specific results: Chapters 5 and 6 contain articles in which this method has been used to answer general questions that are relevant to broad classes of systems. Then, in Chapter 7, we provide an analysis of four different species of magnetic molecules that have recently been synthesized and studied. In all cases, comparisons between QMC calculations and experimental data allow us to distinguish a viable microscopic model and make predictions for future experiments. In Chapter 8, the infamous ''negative sign problem'' is described in detail, and we clearly indicate the limitations on QMC that are imposed by this obstacle. Finally, Chapter 9 contains a summary of the present work and the expected directions for future research.« less

Protection of autonomous microgrids using agent-based distributed communication

DOE PAGES

Cintuglu, Mehmet H.; Ma, Tan; Mohammed, Osama A.

2016-04-06

This study presents a real-time implementation of autonomous microgrid protection using agent-based distributed communication. Protection of an autonomous microgrid requires special considerations compared to large scale distribution net-works due to the presence of power converters and relatively low inertia. In this work, we introduce a practical overcurrent and a frequency selectivity method to overcome conventional limitations. The proposed overcurrent scheme defines a selectivity mechanism considering the remedial action scheme (RAS) of the microgrid after a fault instant based on feeder characteristics and the location of the intelligent electronic devices (IEDs). A synchrophasor-based online frequency selectivity approach is proposed to avoidmore » pulse loading effects in low inertia microgrids. Experimental results are presented for verification of the pro-posed schemes using a laboratory based microgrid. The setup was composed of actual generation units and IEDs using IEC 61850 protocol. The experimental results were in excellent agreement with the proposed protection scheme.« less

Experimental spectroscopy for the high-school Physics curriculum

NASA Astrophysics Data System (ADS)

Kinra, Rajeev; Karpetis, Adonios

2008-11-01

The present work explores the feasibility of including spectroscopic experiments in high-school physics curricula. Two experimental optics ``modules'' were constructed for this purpose: (a) a simple CCD detector, in combination with appropriate filters, was used for the measurement of solar spectra and the determination of the sun's surface temperature; (b) the same detector was used, in combination with a transmissive diffraction grating and some miniature optics, to form a spectrophotometer that can be used for the determination of spectra with high resolution. Both modules were designed and constructed with portability and low cost in mind, and their objective is to introduce experimental spectroscopy to high school students in an intriguing, educational and phase-appropriate manner without sacrificing scientific rigor. A large variety of experiments may be designed around the basic devices that were built during this work, and a number of possible examples will be presented, from research on plant phototropism to human color cognition.

Short-range density functional correlation within the restricted active space CI method

NASA Astrophysics Data System (ADS)

Casanova, David

2018-03-01

In the present work, I introduce a hybrid wave function-density functional theory electronic structure method based on the range separation of the electron-electron Coulomb operator in order to recover dynamic electron correlations missed in the restricted active space configuration interaction (RASCI) methodology. The working equations and the computational algorithm for the implementation of the new approach, i.e., RAS-srDFT, are presented, and the method is tested in the calculation of excitation energies of organic molecules. The good performance of the RASCI wave function in combination with different short-range exchange-correlation functionals in the computation of relative energies represents a quantitative improvement with respect to the RASCI results and paves the path for the development of RAS-srDFT as a promising scheme in the computation of the ground and excited states where nondynamic and dynamic electron correlations are important.

[Laboratory and Team-Based Medicine--From the Standpoint of JSLM].

PubMed

Matsuo, Shuji

2014-11-01

The Japanese Society of Laboratory Medicine (JSLM) organized a working group to promote team-based medicine 2 years ago. The Japan Society for Clinical Laboratory Automation (JSCLA) formed a committee for team-based medicine and it was active for five years from 2006 to 2011. The author, an officer of the JSCLA, presents previous activities and policies for the future. The three main activities were as follows: Firstly, a seminar with a lecture and practice was held at meetings of the JSCLA. Secondly, Internet services were set up to introduce action programs and promote team-based medicine. Thirdly, the guidebook was edited, written from the point of view of laboratory medicine. The committee worked hard and produced favorable results. It is difficult with the present circumstances to organize a committee for team-based medicine in the JSCLA again. We expect cooperation in seminars and meetings.

J-resistance curves for Inconel 690 and Incoloy 800 nuclear steam generators tubes at room temperature and at 300 °C

NASA Astrophysics Data System (ADS)

Bergant, Marcos A.; Yawny, Alejandro A.; Perez Ipiña, Juan E.

2017-04-01

The structural integrity of steam generator tubes is a relevant issue concerning nuclear plant safety. In the present work, J-resistance curves of Inconel 690 and Incoloy 800 nuclear steam generator tubes with circumferential and longitudinal through wall cracks were obtained at room temperature and 300 °C using recently developed non-standard specimens' geometries. It was found that Incoloy 800 tubes exhibited higher J-resistance curves than Inconel 690 for both crack orientations. For both materials, circumferential cracks resulted into higher fracture resistance than longitudinal cracks, indicating a certain degree of texture anisotropy introduced by the tube fabrication process. From a practical point of view, temperature effects have found to be negligible in all cases. The results obtained in the present work provide a general framework for further application to structural integrity assessments of cracked tubes in a variety of nuclear steam generator designs.

Protection of autonomous microgrids using agent-based distributed communication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cintuglu, Mehmet H.; Ma, Tan; Mohammed, Osama A.

This study presents a real-time implementation of autonomous microgrid protection using agent-based distributed communication. Protection of an autonomous microgrid requires special considerations compared to large scale distribution net-works due to the presence of power converters and relatively low inertia. In this work, we introduce a practical overcurrent and a frequency selectivity method to overcome conventional limitations. The proposed overcurrent scheme defines a selectivity mechanism considering the remedial action scheme (RAS) of the microgrid after a fault instant based on feeder characteristics and the location of the intelligent electronic devices (IEDs). A synchrophasor-based online frequency selectivity approach is proposed to avoidmore » pulse loading effects in low inertia microgrids. Experimental results are presented for verification of the pro-posed schemes using a laboratory based microgrid. The setup was composed of actual generation units and IEDs using IEC 61850 protocol. The experimental results were in excellent agreement with the proposed protection scheme.« less

Creativity and Creative Teams

NASA Technical Reports Server (NTRS)

Wood, Richard M.; Bauer, Steven X. S.; Hunter, Craig A.

2001-01-01

A review of the linkage between knowledge, creativity, and design is presented and related to the best practices of multidisciplinary design teams. The discussion related to design and design teams is presented in the context of both the complete aerodynamic design community and specifically the work environment at the NASA Langley Research Center. To explore ways to introduce knowledge and creativity into the research and design environment at NASA Langley Research Center a creative design activity was executed within the context of a national product development activity. The success of the creative design team activity gave rise to a need to communicate the experience in a straightforward and managed approach. As a result the concept of creative potential its formulated and assessed with a survey of a small portion of the aeronautics research staff at NASA Langley Research Center. The final section of the paper provides recommendations for future creative organizations and work environments.

Application of active magnetic bearings in flexible rotordynamic systems - A state-of-the-art review

NASA Astrophysics Data System (ADS)

Siva Srinivas, R.; Tiwari, R.; Kannababu, Ch.

2018-06-01

In this paper a critical review of literature on applications of Active Magnetic Bearings (AMBs) systems in flexible rotordynamic systems have been presented. AMBs find various applications in rotating machinery; however, this paper mainly focuses on works in vibration suppression and associated with the condition monitoring using AMBs. It briefly introduces reader to the AMB working principle, provides details of various hardware components of a typical rotor-AMB test rig, and presents a background of traditional methods of vibration suppression in flexible rotors and the condition monitoring. It then moves on to summarize the basic features of AMB integrated flexible rotor test rigs available in literature with necessary instrumentation and its main objectives. A couple of lookup tables provide summary of important information of test rigs in papers within the scope of this article. Finally, future directions in AMB research within the paper's scope have been suggested.

On a PLIF quantification methodology in a nonlinear dye response regime

NASA Astrophysics Data System (ADS)

Baj, P.; Bruce, P. J. K.; Buxton, O. R. H.

2016-06-01

A new technique of planar laser-induced fluorescence calibration is presented in this work. It accounts for a nonlinear dye response at high concentrations, an illumination light attenuation and a secondary fluorescence's influence in particular. An analytical approximation of a generic solution of the Beer-Lambert law is provided and utilized for effective concentration evaluation. These features make the technique particularly well suited for high concentration measurements, or those with a large range of concentration values, c, present (i.e. a high dynamic range of c). The method is applied to data gathered in a water flume experiment where a stream of a fluorescent dye (rhodamine 6G) was released into a grid-generated turbulent flow. Based on these results, it is shown that the illumination attenuation and the secondary fluorescence introduce a significant error into the data quantification (up to 15 and 80 %, respectively, for the case considered in this work) unless properly accounted for.

Sophisticated Calculation of the 1oo4-architecture for Safety-related Systems Conforming to IEC61508

NASA Astrophysics Data System (ADS)

Hayek, A.; Bokhaiti, M. Al; Schwarz, M. H.; Boercsoek, J.

2012-05-01

With the publication and enforcement of the standard IEC 61508 of safety related systems, recent system architectures have been presented and evaluated. Among a number of techniques and measures to the evaluation of safety integrity level (SIL) for safety-related systems, several measures such as reliability block diagrams and Markov models are used to analyze the probability of failure on demand (PFD) and mean time to failure (MTTF) which conform to IEC 61508. The current paper deals with the quantitative analysis of the novel 1oo4-architecture (one out of four) presented in recent work. Therefore sophisticated calculations for the required parameters are introduced. The provided 1oo4-architecture represents an advanced safety architecture based on on-chip redundancy, which is 3-failure safe. This means that at least one of the four channels have to work correctly in order to trigger the safety function.

Genetic engineering for haemophilia A.

PubMed

Gan, Shu Uin; Kon, Oi Lian; Calne, Roy Y

2006-10-01

At first sight, haemophilia A would appear to be an ideal candidate for treatment by gene therapy. There is a single gene defect; cells in different parts of the body, but especially the liver, produce Factor VIII, and only 5% of normal levels of Factor VIII are necessary to prevent the serious symptoms of bleeding. This review attempts to outline the status of gene therapy at present and efforts that have been made to overcome the difficulties and remaining problems that require solving. Undoubtedly, success will be achieved, but it is likely that considerably more work will be necessary before experimental models can be introduced into the clinic with any likelihood of success. The most successful results in animals that may have clinical application were from introducing the Factor VIII gene to newborn animals before antibodies are produced, presumably inducing a state of tolerance.

Risk by use of hearing protectors--expert programme supports SMEs in appropriate selection and use.

PubMed

Liedtke, M

2005-01-01

Comprehensive protection by use of PPE against the hazards at work requires more than proper selection based on the protection level needed: The PPE user directive (Council Directive 89/656/EEC, Official Journal of the European Communities L 393, 30/12/1989 p.0018 - 0028) requires an assessment of personal protective equipment itself, which has to consider the risks which may be introduced by use of PPE or use of combinations of PPE. As an example risks which may be introduced by use of hearing protectors are described. Assistance in the assessment required by PPE user directive (Council Directive 89/656/EEC, Official Journal of the European Communities L 393, 30/12/1989 p. 0018 - 0028) and in selection and use of hearing protectors with regard to this assessment is presented.

Snyder-like modified gravity in Newton's spacetime

NASA Astrophysics Data System (ADS)

Leiva, Carlos

This work is focused on searching a geodesic interpretation of the dynamics of a particle under the effects of a Snyder-like deformation in the background of the Kepler problem. In order to accomplish that task, a Newtonian spacetime is used. Newtonian spacetime is not a metric manifold, but allows to introduce a torsion-free connection in order to interpret the dynamic equations of the deformed Kepler problem as geodesics in a curved spacetime. These geodesics and the curvature terms of the Riemann and Ricci tensors show a mass and a fundamental length dependence as expected, but are velocity-independent that is a feature present in other classical approaches to the problem. In this sense, the effect of introducing a deformed algebra is examined and the corresponding curvature terms calculated, as well as the modifications of the integrals of motion.

Improving work zone safety through speed management.

DOT National Transportation Integrated Search

2013-06-01

Safety hazards are increased in highway work zones as the dynamics of a work zone introduce a constantly changing : environment with varying levels of risk. Excessive speeding through work and maintenance zones is a common occurrence : which elevates...

Optimal Integration of Departure and Arrivals in Terminal Airspace

NASA Technical Reports Server (NTRS)

Xue, Min; Zelinski, Shannon Jean

2012-01-01

Coordination of operations with spatially and temporally shared resources such as route segments, fixes, and runways improves the efficiency of terminal airspace management. Problems in this category include scheduling and routing, thus they are normally difficult to solve compared with pure scheduling problems. In order to reduce the computational time, a fast time algorithm formulation using a non-dominated sorting genetic algorithm (NSGA) was introduced in this work and applied to a test case based on existing literature. The experiment showed that new method can solve the whole problem in fast time instead of solving sub-problems sequentially with a window technique. The results showed a 60% or 406 second delay reduction was achieved by sharing departure fixes (more details on the comparison with MILP results will be presented in the final paper). Furthermore, the NSGA algorithm was applied to a problem in LAX terminal airspace, where interactions between 28% of LAX arrivals and 10% of LAX departures are resolved by spatial segregation, which may introduce unnecessary delays. In this work, spatial segregation, temporal segregation, and hybrid segregation were formulated using the new algorithm. Results showed that spatial and temporal segregation approaches achieved similar delay. Hybrid segregation introduced much less delay than the other two approaches. For a total of 9 interacting departures and arrivals, delay reduction varied from 4 minutes to 6.4 minutes corresponding flight time uncertainty from 0 to 60 seconds. Considering the amount of flights that could be affected, total annual savings with hybrid segregation would be significant.

CUTE: A Concolic Unit Testing Engine for C

DTIC Science & Technology

2005-01-01

We also introduce program units of a simple C-like language (cf. [20]). We present how CUTE instruments programs and performs concolic execution. We...works for a simple C-like language shown in Figure 2. START represents the first statement of a program under test. Each statement has an optional...is a variable, c is a constant p ::= v = v | v 6= v | v < v | v ≤ v | v ≥ v | v > v Figure 2: Syntax of a simple C-like language the inputs at the

Modelling robot construction systems

NASA Technical Reports Server (NTRS)

Grasso, Chris

1990-01-01

TROTER's are small, inexpensive robots that can work together to accomplish sophisticated construction tasks. To understand the issues involved in designing and operating a team of TROTER's, the robots and their components are being modeled. A TROTER system that features standardized component behavior is introduced. An object-oriented model implemented in the Smalltalk programming language is described and the advantages of the object-oriented approach for simulating robot and component interactions are discussed. The presentation includes preliminary results and a discussion of outstanding issues.

CyberPetri at CDX 2016: Real-time Network Situation Awareness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arendt, Dustin L.; Best, Daniel M.; Burtner, Edwin R.

CyberPetri is a novel visualization technique that provides a flexible map of the network based on available characteristics, such as IP address, operating system, or service. Previous work introduced CyberPetri as a visualization feature in Ocelot, a network defense tool that helped security analysts understand and respond to an active defense scenario. In this paper we present a case study in which we use the CyberPetri visualization technique to support real-time situation awareness during the 2016 Cyber Defense Exercise.

Education and Learning Improvement by Introduction of an Evaluation System to Graduation Research Work

NASA Astrophysics Data System (ADS)

Kuba, Takahiro; Yasufuku, Noriyuki

A new evaluation system was introduced to the graduation research in the Civil Engineering Course, Department of Earth Resources, Marine and Civil Engineering, Kyushu University. The purpose of the graduation research was also specified, and it was shared by all the students and the educators in the course. Consequently, the introduction of the system apparently led to education improvement for the educators, as well as learning improvement for the students, e.g., their presentation ability and communications skills have improved.

Blockmodels for connectome analysis

NASA Astrophysics Data System (ADS)

Moyer, Daniel; Gutman, Boris; Prasad, Gautam; Faskowitz, Joshua; Ver Steeg, Greg; Thompson, Paul

2015-12-01

In the present work we study a family of generative network model and its applications for modeling the human connectome. We introduce a minor but novel variant of the Mixed Membership Stochastic Blockmodel and apply it and two other related model to two human connectome datasets (ADNI and a Bipolar Disorder dataset) with both control and diseased subjects. We further provide a simple generative classifier that, alongside more discriminating methods, provides evidence that blockmodels accurately summarize tractography count networks with respect to a disease classification task.

Design, development and first validation of a transcoding system from ICD-9-CM to ICD-10 in the IT.DRG Italian project.

PubMed

Della Mea, Vincenzo; Vuattolo, Omar; Frattura, Lucilla; Munari, Flavia; Verdini, Eleonora; Zanier, Loris; Arcangeli, Laura; Carle, Flavia

2015-01-01

In Italy, ICD-9-CM is currently used for coding health conditions at hospital discharge, but ICD-10 is being introduced thanks to the IT-DRG Project. In this project, one needed component is a set of transcoding rules and associated tools for easing coders work in the transition. The present paper illustrates design and development of those transcoding rules, and their preliminary testing on a subset of Italian hospital discharge data.

Studies of cartilaginous tissue using Raman spectroscopy method

NASA Astrophysics Data System (ADS)

Timchenko, Pavel E.; Timchenko, Elena V.; Volova, Larisa T.; Dolgyshkin, Dmitry A.; Markova, Maria D.; Kylabyhova, A. Y.; Kornilin, Dmitriy V.

2016-10-01

The work presents the results of studies of samples of human articular surface of the knee joint, obtained by Raman spectroscopy implementedduring endoprosthesis replacement surgery . The main spectral characteristics of articular surface areas with varying degrees of cartilage damage were detected at 956 cm-1, 1066 cm-1 wavenumbers, corresponding to phosphate and carbonate, and at 1660 cm-1, 1271 cm-1 wavenumbers, corresponding to amide I and amide III. Criteria allowing to identify the degree of articular hyaline cartilage damage were introduced.

Intensity measurement of automotive headlamps using a photometric vision system

NASA Astrophysics Data System (ADS)

Patel, Balvant; Cruz, Jose; Perry, David L.; Himebaugh, Frederic G.

1996-01-01

Requirements for automotive head lamp luminous intensity tests are introduced. The rationale for developing a non-goniometric photometric test system is discussed. The design of the Ford photometric vision system (FPVS) is presented, including hardware, software, calibration, and system use. Directional intensity plots and regulatory test results obtained from the system are compared to corresponding results obtained from a Ford goniometric test system. Sources of error for the vision system and goniometer are discussed. Directions for new work are identified.

Polarization analysis of holographic gratings recorded in organic conductive material

NASA Astrophysics Data System (ADS)

Fontanilla-Urdaneta, R.; Hernández-Garay, M. P.; Olivares-Pérez, A.; Páez-Trujillo, G.; Fuentes-Tapia, I.

2007-09-01

This work presents experimental results of intensity changes by polarization conditions at the resultant diffraction patters. The substrate used as retarder plate was a commercial transparency film for use with plain paper copier (3M-PP2900 TM). The conductive material composition was introduce to dichromated poly(vinyl alcohol) by adding a metallic salt as nickel(II) chloride hexahydrate. Some electro-optical characteristics of organic conductive material that are used in the holographic gratings storage specifically when applied voltage.

A risk-based coverage model for video surveillance camera control optimization

NASA Astrophysics Data System (ADS)

Zhang, Hongzhou; Du, Zhiguo; Zhao, Xingtao; Li, Peiyue; Li, Dehua

2015-12-01

Visual surveillance system for law enforcement or police case investigation is different from traditional application, for it is designed to monitor pedestrians, vehicles or potential accidents. Visual surveillance risk is defined as uncertainty of visual information of targets and events monitored in present work and risk entropy is introduced to modeling the requirement of police surveillance task on quality and quantity of vide information. the prosed coverage model is applied to calculate the preset FoV position of PTZ camera.

Ethernet ring protection with managed FDB using APS payload

NASA Astrophysics Data System (ADS)

Im, Jinsung; Ryoo, Jeong-dong; Joo, Bheom Soon; Rhee, J.-K. Kevin

2007-11-01

Ethernet ring protection (ERP) is a new technology based on OAM (operations, administration, and maintenance) being standardized by the ITU-T G.8032 working group. In this paper, we present the recent development of Ethernet ring protection which is called FDB (filtering database) flush scheme and propose a new Ethernet ring protection technique introducing a managed FDB using APS to deliver information how to fix FDB selectively. We discuss the current development of the ERP technology at ITU-T and performance comparisons between different proposals.

Computation of Radiation Heat Transfer in Aeroengine Combustors

NASA Technical Reports Server (NTRS)

Patankar, S. V.

1996-01-01

In this report the highlights of the research completed for the NASA are summarized. This research has been completed in the form of two Ph.D. theses by Chai (1994) and Parthasarathy (1996). Readers are referred to these theses for a complete details of the work and lists of references. In the following sections, first objectives of this research are introduced, then the finite-volume method for radiation heat transfer is described, and finally computations of radiative heat transfer in non-gray participating media is presented.

[Strategic thinking of the construction of national schistosomiasis laboratory network in China].

PubMed

Qin, Zhi-Qiang; Xu, Jing; Feng, Ting; Zhu, Hong-Qing; Li, Shi-Zhu; Xiao, Ning; Zhou, Xiao-Nong

2013-08-01

A schistosomiasis laboratory network and its quality assurance system have been built and will be more and more perfect in China. This paper introduces the present situation of schistosomiasis diagnosis in China and expounds the basic ideas and the progress in the construction of schistosomiasis network platform. Furthermore, the face of schistosomiasis diagnosis network platform construction and operation of the challenge and the future work will be put forward in the latter part of this paper.

Introducing Boris Ioffe

NASA Astrophysics Data System (ADS)

Geshkenbein, B. V.

I am honored to present Boris Lazarevich Ioffe to the readers of the Ioffe Festschrift, which is being published on the occasion of his 75-th birthday. First, some basic biographical data. Boris Ioffe was born in Moscow on July 6, 1926, into a Jewish family. His father was a famous medical doctor, a urologist, and his mother was a librarian. During the second World War, Ioffe's father was the head of a large military hospital, and for some time, Boris worked in a hospital too…

The Serpent Monte Carlo Code: Status, Development and Applications in 2013

NASA Astrophysics Data System (ADS)

Leppänen, Jaakko; Pusa, Maria; Viitanen, Tuomas; Valtavirta, Ville; Kaltiaisenaho, Toni

2014-06-01

The Serpent Monte Carlo reactor physics burnup calculation code has been developed at VTT Technical Research Centre of Finland since 2004, and is currently used in 100 universities and research organizations around the world. This paper presents the brief history of the project, together with the currently available methods and capabilities and plans for future work. Typical user applications are introduced in the form of a summary review on Serpent-related publications over the past few years.

[International cooperation on aging: areas and players].

PubMed

Sidorenko, A V; Mikhaĭlova, O N

2014-01-01

This review article is devoted to the issues of international cooperation on ageing. It aims at describing the basic areas of cooperation and introducing its major players. Within the limited length of a journal article it is hardly possible to offer an exhaustive presentation of all available information; thus the article strives to provide a general orientation within the selected themes. The authors are hopeful that the presented materials will be of interest to the policy oriented researchers, policy makers and professionals working in the field of ageing and related areas such as social security, health and social services etc., as well as to the activists of non-governmental organizations.

CONTINUOUS-ENERGY MONTE CARLO METHODS FOR CALCULATING GENERALIZED RESPONSE SENSITIVITIES USING TSUNAMI-3D

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perfetti, Christopher M; Rearden, Bradley T

2014-01-01

This work introduces a new approach for calculating sensitivity coefficients for generalized neutronic responses to nuclear data uncertainties using continuous-energy Monte Carlo methods. The approach presented in this paper, known as the GEAR-MC method, allows for the calculation of generalized sensitivity coefficients for multiple responses in a single Monte Carlo calculation with no nuclear data perturbations or knowledge of nuclear covariance data. The theory behind the GEAR-MC method is presented here, and proof of principle is demonstrated by using the GEAR-MC method to calculate sensitivity coefficients for responses in several 3D, continuous-energy Monte Carlo applications.

Impact of infrasound atmospheric noise on gravity detectors used for astrophysical and geophysical applications

NASA Astrophysics Data System (ADS)

Fiorucci, Donatella; Harms, Jan; Barsuglia, Matteo; Fiori, Irene; Paoletti, Federico

2018-03-01

Density changes in the atmosphere produce a fluctuating gravity field that affects gravity strainmeters or gravity gradiometers used for the detection of gravitational waves and for geophysical applications. This work addresses the impact of the atmospheric local gravity noise on such detectors, extending previous analyses. In particular we present the effect introduced by the building housing the detectors, and we analyze local gravity-noise suppression by constructing the detector underground. We present also new sound spectra and correlation measurements. The results obtained are important for the design of future gravitational-wave detectors and gravity gradiometers used to detect prompt gravity perturbations from earthquakes.

Getting Started: A Call for Storytelling in Family Medicine Education.

PubMed

Ventres, William; Gross, Paul

2016-10-01

In this article we introduce family medicine educators to storytelling as an important teaching tool. We describe how stories are a critical part of the work of family physicians. We review the rationales for family medicine educators to become skilled storytellers. We present the components of effective stories, proposing two different perspectives on how to imagine, construct, and present them. We provide a list of resources for getting started in storytelling and offer two personal vignettes that articulate the importance of storytelling in the authors' respective professional developments. We point the way forward for family medicine educators interested in integrating storytelling into their repertoire of teaching skills.

New leads in speculative behavior

NASA Astrophysics Data System (ADS)

Kindler, A.; Bourgeois-Gironde, S.; Lefebvre, G.; Solomon, S.

2017-02-01

The Kiyotaki and Wright (1989) (henceforth KW) model of money emergence as a medium of exchange has been studied from various perspectives in recent papers. In the present work we propose a minimalistic model for the behavior of agents in the KW framework, which may either reproduce the theoretical predictions of Kiyotaki and Wright (1989) on the emerging Nash equilibria, or (less closely) the empirical results of Brown (1996), Duffy and Ochs (1999) and our own, introduced in a first part of the present paper. The main import is the systematic computer scanning of speculative monetary equilibria under drastic bounded rationality of agents, based on behavior previously observed in the lab.

Multi-purpose ECG telemetry system.

PubMed

Marouf, Mohamed; Vukomanovic, Goran; Saranovac, Lazar; Bozic, Miroslav

2017-06-19

The Electrocardiogram ECG is one of the most important non-invasive tools for cardiac diseases diagnosis. Taking advantage of the developed telecommunication infrastructure, several approaches that address the development of telemetry cardiac devices were introduced recently. Telemetry ECG devices allow easy and fast ECG monitoring of patients with suspected cardiac issues. Choosing the right device with the desired working mode, signal quality, and the device cost are still the main obstacles to massive usage of these devices. In this paper, we introduce design, implementation, and validation of a multi-purpose telemetry system for recording, transmission, and interpretation of ECG signals in different recording modes. The system consists of an ECG device, a cloud-based analysis pipeline, and accompanied mobile applications for physicians and patients. The proposed ECG device's mechanical design allows laypersons to easily record post-event short-term ECG signals, using dry electrodes without any preparation. Moreover, patients can use the device to record long-term signals in loop and holter modes, using wet electrodes. In order to overcome the problem of signal quality fluctuation due to using different electrodes types and different placements on subject's chest, customized ECG signal processing and interpretation pipeline is presented for each working mode. We present the evaluation of the novel short-term recorder design. Recording of an ECG signal was performed for 391 patients using a standard 12-leads golden standard ECG and the proposed patient-activated short-term post-event recorder. In the validation phase, a sample of validation signals followed peer review process wherein two experts annotated the signals in terms of signal acceptability for diagnosis.We found that 96% of signals allow detecting arrhythmia and other signal's abnormal changes. Additionally, we compared and presented the correlation coefficient and the automatic QRS delineation results of both short-term post-event recorder and 12-leads golden standard ECG recorder. The proposed multi-purpose ECG device allows physicians to choose the working mode of the same device according to the patient status. The proposed device was designed to allow patients to manage the technical requirements of both working modes. Post-event short-term ECG recording using the proposed design provide physicians reliable three ECG leads with direct symptom-rhythm correlation.

The nature of short-term consolidation in visual working memory.

PubMed

Ricker, Timothy J; Hardman, Kyle O

2017-11-01

Short-term consolidation is the process by which stable working memory representations are created. This process is fundamental to cognition yet poorly understood. The present work examines short-term consolidation using a Bayesian hierarchical model of visual working memory recall to determine the underlying processes at work. Our results show that consolidation functions largely through changing the proportion of memory items successfully maintained until test. Although there was some evidence that consolidation affects representational precision, this change was modest and could not account for the bulk of the consolidation effect on memory performance. The time course of the consolidation function and selective influence of consolidation on specific serial positions strongly indicates that short-term consolidation induces an attentional blink. The blink leads to deficits in memory for the immediately following item when time pressure is introduced. Temporal distinctiveness accounts of the consolidation process are tested and ruled out. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Self-rostering and psychosocial work factors - a mixed methods intervention study.

PubMed

Hansen, Åse Marie; Nabe-Nielsen, Kirsten; Albertsen, Karen; Hogh, Annie; Lund, Henrik; Hvid, Helge; Garde, Anne Helene

2015-03-01

This study aims at 1) examining the effect of self-rostering on emotional demands, quantitative demands, work pace, influence, social community at work, social support from leaders and colleagues, job satisfaction, and negative acts, 2) examining whether this effect was mediated through increased influence on the scheduling of working hours, and interpreting the results in light of the different implementation processes that emerged in the study and by including qualitative data. We conducted a 12 months follow-up, quasi-experimental study of self-rostering among 28 workplaces out of which 14 served as reference workplaces. We also interviewed 26 employees and 14 managers about their expectations of introducing self-rostering. In the present study implementation of self-rostering had a positive effect on job demands and the social environment of the workplace, especially if the intervention does not comprise drastic changes of the organisation of the employees' work and private life. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

How can plants tell which way is up?

NASA Technical Reports Server (NTRS)

Kiss, J. Z.; Weise, S. E.; Kiss, H. G.

2000-01-01

Many people think of plants as essentially sessile organisms that do not actively respond to their environment. What could be further from the truth! In fact, plants are capable of a variety of movements, including the dramatic nastic responses (such as Venus fly trap closure) and the less sensational tropisms. These latter movements are directed growth responses to some type of external stimulus such as gravity (gravitropism, formerly known as geotropism) or light (phototropism). This paper describes some interesting exercises that are derived from recent work, including research that has led to experiments performed on two Space Shuttle missions in 1997 (Kiss et al. 1998). The study of tropisms can be a useful way to introduce students to plant biology in high school and introductory college courses. In our experience, students are fascinated by plant movements when they are presented in lectures and find laboratory experiences on this topic quite engaging. Laboratory work on plant tropisms can also be used to introduce important concepts in science such as hypothesis testing, quantitative analysis, and the use of statistics. The laboratory exercises described in this paper involve the higher plant Arabidopsis thaliana, which has become an important organism in molecular biology research and is the focus of an international plant genome project. Based on the material presented here, a number of plant gravitropism laboratory exercises with Arabidopsis that are simple in terms of equipment/materials and procedures can be developed. These exercises are robust in that they work well even in the hands of introductory students, and they can be expanded according to the individual instructor's needs. This paper describes two exercises that have been performed by beginning college students, and these exercises can easily be performed in biology classes in most high school settings.

Managerial segmentation of service offerings in work commuting.

DOT National Transportation Integrated Search

2015-03-01

Methodology to efficiently segment markets for public transportation offerings has been introduced and exemplified in an : application to an urban travel corridor in which high tech companies predominate. The principal objective has been to introduce...

Medical education... meet Michel Foucault.

PubMed

Hodges, Brian D; Martimianakis, Maria A; McNaughton, Nancy; Whitehead, Cynthia

2014-06-01

There have been repeated calls for the greater use of conceptual frameworks and of theory in medical education. Although it is familiar to few medical educators, Michel Foucault's work is a helpful theoretical and methodological source. This article explores what it means to use a 'Foucauldian approach', presents a sample of Foucault's historical-genealogical studies that are relevant to medical education, and introduces the work of four researchers currently undertaking Foucauldian-inspired medical education research. Although they are not without controversy, Foucauldian approaches are employed by an increasing number of scholars and are helpful in shedding light on what it is possible to think, say and be in medical education. Our hope in sharing this Foucauldian work and perspective is that we might stimulate a dialogue that is forward-looking and optimistic about the possibilities for change in medical education. © 2014 John Wiley & Sons Ltd.

The Influence of CO2 Admixtures on the Product Composition in a Nitrogen-Methane Atmospheric Glow Discharge Used as a Prebiotic Atmosphere Mimic.

PubMed

Mazankova, V; Torokova, L; Krcma, F; Mason, N J; Matejcik, S

2016-11-01

This work extends our previous experimental studies of the chemistry of Titan's atmosphere by atmospheric glow discharge. The Titan's atmosphere seems to be similarly to early Earth atmospheric composition. The exploration of Titan atmosphere was initiated by the exciting results of the Cassini-Huygens mission and obtained results increased the interest about prebiotic atmospheres. Present work is devoted to the role of CO 2 in the prebiotic atmosphere chemistry. Most of the laboratory studies of such atmosphere were focused on the chemistry of N 2  + CH 4 mixtures. The present work is devoted to the study of the oxygenated volatile species in prebiotic atmosphere, specifically CO 2 reactivity. CO 2 was introduced to the standard N 2  + CH 4 mixture at different mixing ratio up to 5 % CH 4 and 3 % CO 2 . The reaction products were characterized by FTIR spectroscopy. This work shows that CO 2 modifies the composition of the gas phase with the detection of oxygenated compounds: CO and others oxides. There is a strong influence of CO 2 on increasing concentration other products as cyanide (HCN) and ammonia (NH 3 ).

TU-D-201-01: 2016 Economics Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fontenot, J; Fuss, W

The purpose of this session is to introduce attendees to the healthcare reimbursement system and how it applies to the clinical work of a medical physicist. This will include general information about the different categories of payers and payees, how work is described by CPT codes, and how various payers set values for this work in different clinical settings. 2016 is another year of significant changes to the payment system. This presentation will describe the work encompassed in these codes and will give attendees an overview of the changes for 2016 as they apply to radiation oncology. Finally, some insightmore » into what can be expected during 2017 will be presented. This includes what information is typically released by the Centers for Medicaid and Medicare Services (CMS) during the year and how we as an organization respond. This will include ways members can interact with the AAPM professional economics committee and other resources members may find helpful. Learning objectives1) Basics of how Medicare is structured and how reimbursement rates are set.2) Basic understanding of proposed changes to the 2016 Medicare rules.3) Describe economics and policy resources that are available from the AAPM and how to interact with the professional economics committee.« less

A Robot Trajectory Optimization Approach for Thermal Barrier Coatings Used for Free-Form Components

NASA Astrophysics Data System (ADS)

Cai, Zhenhua; Qi, Beichun; Tao, Chongyuan; Luo, Jie; Chen, Yuepeng; Xie, Changjun

2017-10-01

This paper is concerned with a robot trajectory optimization approach for thermal barrier coatings. As the requirements of high reproducibility of complex workpieces increase, an optimal thermal spraying trajectory should not only guarantee an accurate control of spray parameters defined by users (e.g., scanning speed, spray distance, scanning step, etc.) to achieve coating thickness homogeneity but also help to homogenize the heat transfer distribution on the coating surface. A mesh-based trajectory generation approach is introduced in this work to generate path curves on a free-form component. Then, two types of meander trajectories are generated by performing a different connection method. Additionally, this paper presents a research approach for introducing the heat transfer analysis into the trajectory planning process. Combining heat transfer analysis with trajectory planning overcomes the defects of traditional trajectory planning methods (e.g., local over-heating), which helps form the uniform temperature field by optimizing the time sequence of path curves. The influence of two different robot trajectories on the process of heat transfer is estimated by coupled FEM models which demonstrates the effectiveness of the presented optimization approach.

Education for entrepreneurship in nursing.

PubMed

Boore, Jennifer; Porter, Sharon

2011-02-01

The different types of entrepreneurship, including social entrepreneurship and intrapreneurship, and the importance of social entrepreneurship skills in the changing world of health care are discussed. The term social intrapreneurship is introduced to characterise the many nurses introducing change and enhancing care working within the NHS. The strategy for development of entrepreneurship education within one region of the UK is presented and its integration into a pre-registration nursing programme is the main focus of this paper. The process of integration of skills in the changing world of health care is discussed. The strategy for development of entrepreneurship is presented under the headings of the NICENT (Northern Ireland Centre for Entrepreneurship) @ Ulster Integration Model: Awareness and Understanding; Interpretation; Contextualisation; Integration (Theoretical Content); Integration (Assessment); Validation/Revalidation; Implementation; and Review and Reflection. The most important stages were the first two in which nursing academic staff came to realise the relevance of the topic to nursing and the interpretation and translation into 'nurse-speak' of the business terminology to alleviate the initial rejection of entrepreneurship as of no relevance to nursing. Copyright © 2010 Elsevier Ltd. All rights reserved.

Nasogastric feeding tube located in the lung. SENSAR case of the trimester.

PubMed

2017-01-01

A clinical case is presented that was communicated to Spanish Notification System on Safety in Anaesthesia and Recovery (SENSAR). Using this communication and its analysis, a strategy is obtained in order to reduce the risks associated with the insertion of a nasogastric tube (NST) for enteral nutrition in adult patients in the post-surgical recovery unit. A description of the incident is presented, an analysis of its causes, and the measures that were introduced in order to avoid similar incidents in the future, as well as to promote a safety culture in the organisation. A description of associated incidents registered in SENSAR is also given. The aim of this work is to describe, analyse and introduce safety measures arising from incidents notified to SENSAR, associated with the insertion and checking of the nutrition NST in adult patients in the post-surgical recovery unit. Copyright © 2016 Sociedad Española de Anestesiología, Reanimación y Terapéutica del Dolor. Publicado por Elsevier España, S.L.U. All rights reserved.

Evolutionary Developmental Robotics: Improving Morphology and Control of Physical Robots.

PubMed

Vujovic, Vuk; Rosendo, Andre; Brodbeck, Luzius; Iida, Fumiya

2017-01-01

Evolutionary algorithms have previously been applied to the design of morphology and control of robots. The design space for such tasks can be very complex, which can prevent evolution from efficiently discovering fit solutions. In this article we introduce an evolutionary-developmental (evo-devo) experiment with real-world robots. It allows robots to grow their leg size to simulate ontogenetic morphological changes, and this is the first time that such an experiment has been performed in the physical world. To test diverse robot morphologies, robot legs of variable shapes were generated during the evolutionary process and autonomously built using additive fabrication. We present two cases with evo-devo experiments and one with evolution, and we hypothesize that the addition of a developmental stage can be used within robotics to improve performance. Moreover, our results show that a nonlinear system-environment interaction exists, which explains the nontrivial locomotion patterns observed. In the future, robots will be present in our daily lives, and this work introduces for the first time physical robots that evolve and grow while interacting with the environment.

Polyester Fabric's Fluorescent Dyeing in Supercritical Carbon Dioxide and its Fluorescence Imaging.

PubMed

Xiong, Xiaoqing; Xu, Yanyan; Zheng, Laijiu; Yan, Jun; Zhao, Hongjuan; Zhang, Juan; Sun, Yanfeng

2017-03-01

As one of the most important coumarin-like dyes, disperse fluorescent Yellow 82 exhibits exceptionally large two-photon effects. Here, it was firstly introduced into the supercritical CO 2 dyeing polyester fabrics in this work. Results of the present work showed that the dyeing parameters such as the dyeing time, pressure and temperature had remarkable influences on the color strength of fabrics. The optimized dyeing condition in supercritical CO 2 dyeing has been proposed that the dyeing time was 60 min; the pressure was 25 MPa and the temperature was 120 °C. As a result, acceptable products were obtained with the wash and rub fastness rating at 5 or 4-5. The polyester fabrics dyed with fluorescent dyes can be satisfied for the requirement of manufacturing warning clothing. Importantly, the confocal microscopy imaging technology was successfully introduced into textile fields to observe the distribution and fluorescence intensity of disperse fluorescent Yellow 82 on polyester fabrics. As far as we know, this is the first report about supercritical CO 2 dyeing polyester fabrics based on disperse fluorescent dyes. It will be very helpful for the further design of new fluorescent functional dyes suitable for supercritical CO 2 dyeing technique.

Wearable kinesthetic system for capturing and classifying upper limb gesture in post-stroke rehabilitation.

PubMed

Tognetti, Alessandro; Lorussi, Federico; Bartalesi, Raphael; Quaglini, Silvana; Tesconi, Mario; Zupone, Giuseppe; De Rossi, Danilo

2005-03-02

BACKGROUND: Monitoring body kinematics has fundamental relevance in several biological and technical disciplines. In particular the possibility to exactly know the posture may furnish a main aid in rehabilitation topics. In the present work an innovative and unobtrusive garment able to detect the posture and the movement of the upper limb has been introduced, with particular care to its application in post stroke rehabilitation field by describing the integration of the prototype in a healthcare service. METHODS: This paper deals with the design, the development and implementation of a sensing garment, from the characterization of innovative comfortable and diffuse sensors we used to the methodologies employed to gather information on the posture and movement which derive from the entire garments. Several new algorithms devoted to the signal acquisition, the treatment and posture and gesture reconstruction are introduced and tested. RESULTS: Data obtained by means of the sensing garment are analyzed and compared with the ones recorded using a traditional movement tracking system. CONCLUSION: The main results treated in this work are summarized and remarked. The system was compared with a commercial movement tracking system (a set of electrogoniometers) and it performed the same accuracy in detecting upper limb postures and movements.

Monte Carlo simulation of the mixed alkali effect with cooperative jumps

NASA Astrophysics Data System (ADS)

Habasaki, Junko; Hiwatari, Yasuaki

2000-12-01

In our previous works on molecular dynamics (MD) simulations of lithium metasilicate (Li2SiO3), it has been shown that the long time behavior of the lithium ions in Li2SiO3 has been characterized by the component showing the enhanced diffusion (Lévy flight) due to cooperative jumps. It has also been confirmed that the contribution of such component decreases by interception of the paths in the mixed alkali silicate (LiKSiO3). Namely, cooperative jumps of like ions are much decreased in number owing to the interception of the path for unlike alkali-metal ions. In the present work, we have performed a Monte Carlo simulation using a cubic lattice in order to establish the role of the cooperative jumps in the transport properties in a mixed alkali glass. Fixed particles (blockage) were introduced instead of the interception of the jump paths for unlike alkali-metal ions. Two types of cooperative motions (a pull type and a push type) were taken into account. Low-dimensionality of the jump path caused by blockage resulted in a decrease of a diffusion coefficient of the particles. The effect of blockage is enhanced when the cooperative motions were introduced.

Working with interpreters: The challenges of introducing Option Grid patient decision aids.

PubMed

Wood, Fiona; Phillips, Katie; Edwards, Adrian; Elwyn, Glyn

2017-03-01

We aimed to observe how an Option Grid™ decision aid for clinical encounters might be used where an interpreter is present, and to assess the impact of its use on shared decision making. Data were available from three clinical consultations between patient, clinician (a physiotherapist), and interpreter about knee osteoarthritis. Clinicians were trained in the use of an Option Grid decision aid and the tool was used. Consultations were audio-recorded, transcribed, and translated by independent translators into English. Analysis revealed the difficulties with introducing a written decision aid into an interpreted consultation. The extra discussion needed between the clinician and interpreter around the principles and purpose of shared decision making and instructions regarding the Option Grid decision aid proved challenging and difficult to manage. Discussion of treatment options while using an Option Grid decision aid was predominantly done between clinician and interpreter. The patient appeared to have little involvement in discussion of treatment options. Patients were not active participants within the discussion. Further work needs to be done on how shared decision making can be achieved within interpreted consultations. Option Grid decision aids are not being used as intended in interpreted consultations. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

GeomarCD project; an educational CD-Rom about marine geophysics

NASA Astrophysics Data System (ADS)

Diaz, J.; Rubio, E.; Gómez, M.; Gallart, J.

2009-04-01

This project aims to introduce the main aspects of marine geophysics experiments to the high school students. We have chosen to present the information in the form an interactive game in which, taking care of the scientific objectives and the technological and logistic resources, the player must found the best strategy to make one of the 3 research projects proposed. Along the game, the player is introduced to the main aspects of the plate tectonics theory and the crustal structure as well as to the main methodologies available (seismics, potencial fields, cores). Rather than being based in theoretical aspects, largely covered by other outreach projects, this work focuses in how a realistic problem can be solved through a field experiment. The game takes place in the researcher's desk and in an oceanographic vessel as the BIO Hesperides and includes the choice of the research project, the design and development of the field work and the interpretation of the results. At the end, the player must complete a questionnaire to elaborate the final report. The correct choice of the appropriate methodologies and its interpretation is necessary to succeed. CD copies in Spanish are freely available upon request.

Security Vulnerability Profiles of Mission Critical Software: Empirical Analysis of Security Related Bug Reports

NASA Technical Reports Server (NTRS)

Goseva-Popstojanova, Katerina; Tyo, Jacob

2017-01-01

While some prior research work exists on characteristics of software faults (i.e., bugs) and failures, very little work has been published on analysis of software applications vulnerabilities. This paper aims to contribute towards filling that gap by presenting an empirical investigation of application vulnerabilities. The results are based on data extracted from issue tracking systems of two NASA missions. These data were organized in three datasets: Ground mission IVV issues, Flight mission IVV issues, and Flight mission Developers issues. In each dataset, we identified security related software bugs and classified them in specific vulnerability classes. Then, we created the security vulnerability profiles, i.e., determined where and when the security vulnerabilities were introduced and what were the dominating vulnerabilities classes. Our main findings include: (1) In IVV issues datasets the majority of vulnerabilities were code related and were introduced in the Implementation phase. (2) For all datasets, around 90 of the vulnerabilities were located in two to four subsystems. (3) Out of 21 primary classes, five dominated: Exception Management, Memory Access, Other, Risky Values, and Unused Entities. Together, they contributed from 80 to 90 of vulnerabilities in each dataset.

Transport and contact-free investigation of REBCO thin film temperature dependent pinning landscapes

NASA Astrophysics Data System (ADS)

Sinclair, John; Jaroszynski, Jan; Hu, Xinbo; Santos, Michael

2013-03-01

Studies of the pinning mechanisms and landscapes of REBa2Cu3Ox (RE=rare earth elements) thin films have been a topic of study in recent years due to, among other reasons, their ability to introduce nonsuperconducting phases and defects. Here we will focus on REBCO thin films with BaZrO3 nanocolumns and other isotropic defects. The evolution of the dominant pinning mechanisms seems to change as a function of temperature even to the point that samples with similar critical current density properties at high temperatures can have distinctly different properties at low temperatures. Earlier work focused on the angular selectivity of the current density profile, though other properties (such as alpha values) can evolve as well. Characteristic results accentuating this evolution of current density properties will be presented. Challenges exist in evaluating these low temperature properties in high magnetic fields, therefore both transport and contact-free results were be presented to compliment the work. Support for this work is provided by the NHMFL via NSF DRM 0654118.

Andrew Liehr and the structure of Jahn-Teller surfaces

NASA Astrophysics Data System (ADS)

Chibotaru, Liviu F.; Iwahara, Naoya

2017-05-01

The present article is an attempt to draw attention to a seminal work by Andrew Liehr “Topological aspects of conformational stability problem” [1, 2] issued more than half century ago. The importance of this work stems from two aspects of static Jahn-Teller and pseudo-Jahn-Teller problems fully developed by the author. First, the work of Liehr offers an almost complete overview of adiabatic potential energy surfaces for most known Jahn-Teller problems including linear, quadratic and higher-order vibronic couplings. Second, and most importantly, it identifies the factors defining the structure of Jahn-Teller surfaces. Among them, one should specially mention the minimax principle stating that the distorted Jahn-Teller systems tend to preserve the highest symmetry consistent with the loss of their orbital degeneracy. We believe that the present short reminiscence not only will introduce a key Jahn-Teller scientist to the young members of the community but also will serve as a vivid example of how a complete understanding of a complex problem, which the Jahn-Teller effect certainly was in the beginning of 1960s, can be achieved.

Watching the paint dry at work: psychometric examination of the Dutch Boredom Scale.

PubMed

Reijseger, Gaby; Schaufeli, Wilmar B; Peeters, Maria C W; Taris, Toon W; van Beek, Ilona; Ouweneel, Else

2013-09-01

Boredom at work is a state of employee unwell-being that is characterized by relatively low arousal and high dissatisfaction. At present little is known about boredom at work. In order to facilitate future research, the current study introduces a brief self-report questionnaire that assesses boredom at work, the Dutch Boredom Scale (DUBS). We argue that (1) boredom at work can be distinguished empirically from related concepts such as work engagement and job burnout; (2) boredom at work results from having an unchallenging, "passive" job; and (3) the subsequent lack of challenge in the form of boredom may result in dissatisfaction with the job and with the organization. Using data from 6315 employees, factor analysis supported the factorial and discriminant validity of the DUBS vis-à-vis engagement and burnout. As expected, structural equation modeling revealed that demands and resources were negatively associated with boredom. Moreover, boredom at work was negatively related with job satisfaction and organizational commitment, and positively with turnover intention. These findings support the validity of the DUBS. Future research may focus on underemployment as an antecedent of boredom at work, and on the effects of boredom on job performance.

The relationship between visual attention and visual working memory encoding: A dissociation between covert and overt orienting.

PubMed

Tas, A Caglar; Luck, Steven J; Hollingworth, Andrew

2016-08-01

There is substantial debate over whether visual working memory (VWM) and visual attention constitute a single system for the selection of task-relevant perceptual information or whether they are distinct systems that can be dissociated when their representational demands diverge. In the present study, we focused on the relationship between visual attention and the encoding of objects into VWM. Participants performed a color change-detection task. During the retention interval, a secondary object, irrelevant to the memory task, was presented. Participants were instructed either to execute an overt shift of gaze to this object (Experiments 1-3) or to attend it covertly (Experiments 4 and 5). Our goal was to determine whether these overt and covert shifts of attention disrupted the information held in VWM. We hypothesized that saccades, which typically introduce a memorial demand to bridge perceptual disruption, would lead to automatic encoding of the secondary object. However, purely covert shifts of attention, which introduce no such demand, would not result in automatic memory encoding. The results supported these predictions. Saccades to the secondary object produced substantial interference with VWM performance, but covert shifts of attention to this object produced no interference with VWM performance. These results challenge prevailing theories that consider attention and VWM to reflect a common mechanism. In addition, they indicate that the relationship between attention and VWM is dependent on the memorial demands of the orienting behavior. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Hold My Calls: An Activity for Introducing the Statistical Process

ERIC Educational Resources Information Center

Abel, Todd; Poling, Lisa

2015-01-01

Working with practicing teachers, this article demonstrates, through the facilitation of a statistical activity, how to introduce and investigate the unique qualities of the statistical process including: formulate a question, collect data, analyze data, and interpret data.

Experiencing Organizational Work Design: Beyond Hackman and Oldham

ERIC Educational Resources Information Center

Fornaciari, Charles J.; Dean, Kathy Lund

2005-01-01

Standard organizational behavior survey courses usually introduce students to the "nuts and bolts" of organizational work design and models that mechanize work. This article develops an experiential exercise that simulates working conditions that can foster greater student understanding of the affective, ethical, and human aspects of work design.…

Semiconductor measurement technology: Microelectronic ultrasonic bonding

NASA Technical Reports Server (NTRS)

Harman, G. G. (Editor)

1974-01-01

Information for making high quality ultrasonic wire bonds is presented as well as data to provide a basic understanding of the ultrasonic systems used. The work emphasizes problems and methods of solving them. The required measurement equipment is first introduced. This is followed by procedures and techniques used in setting up a bonding machine, and then various machine- or operator-induced reliability problems are discussed. The characterization of the ultrasonic system and its problems are followed by in-process bonding studies and work on the ultrasonic bonding (welding) mechanism. The report concludes with a discussion of various effects of bond geometry and wire metallurgical characteristics. Where appropriate, the latest, most accurate value of a particular measurement has been substituted for an earlier reported one.

The potential of computer software that supports the diagnosis of workplace ergonomics in shaping health awareness

NASA Astrophysics Data System (ADS)

Lubkowska, Wioletta

2017-11-01

The growing prevalence of health problems among computer workstation workers has become one of the biggest threats to the overall health of our population. That is why many modern scientists are looking for ways and methods to prevent and reverse these negative trends. The purpose of this article is to present the potential for practical use of computer programs to design an ergonomic workplace and postural loads. These programs help configure the computer workstation correctly and adopt the correct body position during work, which reduces the risk of health problems. Creating visually attractive programs helps encourage and inspire those who work with a computer to introduce ergonomic solutions and reject the sedentary lifestyle.

Meet Your Future: An Interactive Panel on Industry Careers

NASA Astrophysics Data System (ADS)

Lambert, Steven

There will be a brief presentation showing some statistics about careers in physics followed by a panel discussion. The panelists are: Pavel Kornilovich, HP Inc., Senior Technologist Erik Lucero, Google Santa Barbara, Hardware Engineer Raja Rajasekaran, Toptica-USA, Western Regional Sales & Application Manager Tiffany Santos, Western Digital, Principal Research Engineer Krysta Svore, Microsoft, Principal Researcher & Research Manager Each panelist will introduce themselves and give a brief overview of their career path. We'll then open it up to audience participation. Bring your questions about working in the private sector: daily responsibilities, work environment, how to prepare for this path, making contacts, and anything else you'd like to hear about. We look forward to an interactive and lively session.

Design and fabrication of a hybrid maglev model employing PML and SML

NASA Astrophysics Data System (ADS)

Sun, R. X.; Zheng, J.; Zhan, L. J.; Huang, S. Y.; Li, H. T.; Deng, Z. G.

2017-10-01

A hybrid maglev model combining permanent magnet levitation (PML) and superconducting magnetic levitation (SML) was designed and fabricated to explore a heavy-load levitation system advancing in passive stability and simple structure. In this system, the PML was designed to levitate the load, and the SML was introduced to guarantee the stability. In order to realize different working gaps of the two maglev components, linear bearings were applied to connect the PML layer (for load) and the SML layer (for stability) of the hybrid maglev model. Experimental results indicate that the hybrid maglev model possesses excellent advantages of heavy-load ability and passive stability at the same time. This work presents a possible way to realize a heavy-load passive maglev concept.

Mapping the audit traces of interdisciplinary collaboration: bridging and blending between choreography and cognitive science.

PubMed

Barnard, Philip; deLahunta, Scott

2017-01-01

Two long-term sci-art research projects are described and positioned in the broader conceptual landscape of interdisciplinary collaboration. Both projects were aimed at understanding and augmenting choreographic decision-making and both were grounded in research conducted within a leading contemporary dance company. In each case, the work drew upon methods and theory from the cognitive sciences, and both had a direct impact on the way in which the company made new work. In the synthesis presented here the concept of an audit trace is introduced. Audit traces identify how specific classes of knowledge are used and transformed not only within the arts or sciences but also when arts practice is informed by science or when arts practice informs science.

Determination of changes induced by gamma radiation in nectar of kiwi fruit ( Actinidia deliciosa)

NASA Astrophysics Data System (ADS)

Harder, M. N. C.; De Toledo, T. C. F.; Ferreira, A. C. P.; Arthur, V.

2009-07-01

The kiwi ( Actinidia deliciosa; Actinidaceae) is an exotic fruit to Brazil, introduced from southeastern China. The kiwi fruit presents a high nutritional value, rich mainly in vitamin C and fibers, calcium, iron and phosphorus, which give it an excellent nutritional value. Its quality attributes and flavor has lead to acceptance in consuming markets, mainly among children. The objective of this work was to formulate a non-alcoholic sweetened drink based on kiwi fruits, to submit the drink to gamma radiation using increasing doses: 0 (control), 0.5, 1.0 and 2.0 kGy, and to evaluate changes in physical and chemical quality attributes. We found that no significant difference was observed between treatments relative to the control. So we could conclude that for the doses tested significant alterations in the physiochemical characteristics of the kiwi nectar were introduced.

The tuskegee experiment: an introduction in ethics for pre-healthcare professional students.

PubMed

Miranda, Daniel; Sanchez, David Jesse

2014-12-01

Over the past years, professional students have had extensive exposure to clinical cases during basic science classes. With this in mind, we have taken this clinical case exposure moment to be an opportune time to introduce the ethics of working with patients during biomedical research. Our goal is to present a straightforward assignment that allows for active student research into the facts of the Tuskegee Experiment of the 1900s. The assignment provides the necessary background to allow for a student-centered discussion on the ethical issues of the events and ramifications of what happened. Thus, in educating a class on the event's happenings, one concomitantly creates a platform for meaningful discussion on the principles and ethics of patient care. We have found that an ethics-infused event such as the Tuskegee Experiment is an excellent way to introduce students to these topics.

Integrated management of pearl culture in French Polynesia in the context of global change: Synopsis of existing results

NASA Astrophysics Data System (ADS)

Gueguen, Yannick; Gaertner-Mazouni, Nabila; Lo, Cedrik; Le Moullac, Gilles

2016-12-01

The paper presents a state of the art on knowledge of the black pearl oyster aquaculture at the scale of French Polynesia. It also introduces the main results obtained throughout the multi-partners POLYPERL project. The goal of this project was to develop an integrated and participative action-research of the pearl oyster culture system, focusing on the environmental, technological, economical and societal dimensions impacting the industry. The research proposed ranges from the understanding of biological phenomena of the production system to socio-economic aspects and governance of the industry, taking into account the management of anthropogenic, climate and health risks. We introduce here the different papers from the POLYPERL project that are compiled in this volume of ECSS dealing with recent scientific work that can contribute to sustainability of the pearl industry in French Polynesia.

Galen and astrology: a Mésalliance?

PubMed

Cooper, Glen M

2011-01-01

The author examines the question of Galen's affinity with astrology, in view of Galen's extended astrological discussion in the De diebus decretoriis (Critical Days). The critical passages from Galen are examined, and shown to be superficial in understanding. The author performs a lexical sounding of Galen's corpus, using key terms with astrological valences drawn from the Critical Days, and assesses their absence in Galen's other works. He compares Galen's astrology with the astrology of Ptolemy's Tetrabiblos, and evaluates their respective strategies of scientific reasoning. Three types of inference are introduced and applied to Galen's astrology. Finally, he concludes that the empirical side of Galen's science does not depend upon astrological methods or concepts, but that these were introduced for their rhetorical effect in presenting his new medical methodology. It is suggested that continued attention to Galen's astrology has obscured the truly important empirical scientific method that Galen developed.

Space Rocks Tell Their Secrets: Space Science Applications of Physics and Chemistry for High School and College Classes: Update

NASA Technical Reports Server (NTRS)

Lindstrom, M. M.; Tobola, K. W.; Stocco, K.; Henry, M.; Allen, J. S.; McReynolds, Julie; Porter, T. Todd; Veile, Jeri

2004-01-01

As the scientific community studies Mars remotely for signs of life and uses Martian meteorites as its only available samples, teachers, students, and the general public continue to ask, How do we know these meteorites are from Mars? This question sets the stage for a six-lesson instructional package Space Rocks Tell Their Secrets. Expanding on the short answer It s the chemistry of the rock , students are introduced to the research that reveals the true identities of the rocks. Since few high school or beginning college students have the opportunity to participate in this level of research, a slide presentation introduces them to the labs, samples, and people involved with the research. As they work through the lessons and interpret authentic data, students realize that the research is an application of two basic science concepts taught in the classroom, the electromagnetic spectrum and isotopes.

Introduction to The neurosciences and music IV: learning and memory.

PubMed

Altenmüller, E; Demorest, S M; Fujioka, T; Halpern, A R; Hannon, E E; Loui, P; Majno, M; Oechslin, M S; Osborne, N; Overy, K; Palmer, C; Peretz, I; Pfordresher, P Q; Särkämö, T; Wan, C Y; Zatorre, R J

2012-04-01

The conference entitled "The Neurosciences and Music-IV: Learning and Memory'' was held at the University of Edinburgh from June 9-12, 2011, jointly hosted by the Mariani Foundation and the Institute for Music in Human and Social Development, and involving nearly 500 international delegates. Two opening workshops, three large and vibrant poster sessions, and nine invited symposia introduced a diverse range of recent research findings and discussed current research directions. Here, the proceedings are introduced by the workshop and symposia leaders on topics including working with children, rhythm perception, language processing, cultural learning, memory, musical imagery, neural plasticity, stroke rehabilitation, autism, and amusia. The rich diversity of the interdisciplinary research presented suggests that the future of music neuroscience looks both exciting and promising, and that important implications for music rehabilitation and therapy are being discovered. © 2012 New York Academy of Sciences.

Numerical Investigation of Flow Around Rectangular Cylinders with and Without Jets

NASA Technical Reports Server (NTRS)

Tiwari, S. N .; Pidugu, S. B.

1999-01-01

The problem of flow past bluff bodies was studied extensively in the past. The problem of drag reduction is very important in many high speed flow applications. Considerable work has been done in this subject area in case of circular cylinders. The present study attempts to investigate the feasibility of drag reduction on a rectangular cylinder by flow injection by flow injection from the rear stagnation region. The physical problem is modeled as two-dimensional body and numerical analysis is carried out with and without trailing jets. A commercial code is used for this purpose. Unsteady computation is performed in case of rectangular cylinders with no trailing jets where as steady state computation is performed when jet is introduced. It is found that drag can be reduced by introducing jets with small intensity in rear stagnation region of the rectangular cylinders.

A programmable controller based on CAN field bus embedded microprocessor and FPGA

NASA Astrophysics Data System (ADS)

Cai, Qizhong; Guo, Yifeng; Chen, Wenhei; Wang, Mingtao

2008-10-01

One kind of new programmable controller(PLC) is introduced in this paper. The advanced embedded microprocessor and Field-Programmable Gate Array (FPGA) device are applied in the PLC system. The PLC system structure was presented in this paper. It includes 32 bits Advanced RISC Machines (ARM) embedded microprocessor as control core, FPGA as control arithmetic coprocessor and CAN bus as data communication criteria protocol connected the host controller and its various extension modules. It is detailed given that the circuits and working principle, IiO interface circuit between ARM and FPGA and interface circuit between ARM and FPGA coprocessor. Furthermore the interface circuit diagrams between various modules are written. In addition, it is introduced that ladder chart program how to control the transfer info of control arithmetic part in FPGA coprocessor. The PLC, through nearly two months of operation to meet the design of the basic requirements.

Embedded function methods for compressible high speed turbulent flow

NASA Technical Reports Server (NTRS)

Walker, J. D. A.

1989-01-01

Fundamental issues relating to compressible turbulent flow are addressed. The focus has been on developing methods and testing concepts for attached flows rather than trying to force a conventional law of the wall into a zone of backflow. Although the dynamics of the near-wall flow in an attached turbulent boundary layer are relatively well documented, the dynamical features of a zone of reversed turbulent flow are not, nor are they well understood. Incompressibility introduces effects and issues that have been dealt with only marginally in the literature, therefore, the present work has been focussed on attached high-speed flows. The wall function method has been extended up through the supersonic to hypersonic speeds. Algorithms have been successfully introduced into the code that calculates the flow all the way to the wall, and testing is being carried out for progressively more complex flow situations.

The Tuskegee Experiment: An Introduction in Ethics for Pre-Healthcare Professional Students†

PubMed Central

Miranda, Daniel; Sanchez, David Jesse

2014-01-01

Over the past years, professional students have had extensive exposure to clinical cases during basic science classes. With this in mind, we have taken this clinical case exposure moment to be an opportune time to introduce the ethics of working with patients during biomedical research. Our goal is to present a straightforward assignment that allows for active student research into the facts of the Tuskegee Experiment of the 1900s. The assignment provides the necessary background to allow for a student-centered discussion on the ethical issues of the events and ramifications of what happened. Thus, in educating a class on the event’s happenings, one concomitantly creates a platform for meaningful discussion on the principles and ethics of patient care. We have found that an ethics-infused event such as the Tuskegee Experiment is an excellent way to introduce students to these topics. PMID:25574286

Complex patterns of abnormal heartbeats

NASA Technical Reports Server (NTRS)

Schulte-Frohlinde, Verena; Ashkenazy, Yosef; Goldberger, Ary L.; Ivanov, Plamen Ch; Costa, Madalena; Morley-Davies, Adrian; Stanley, H. Eugene; Glass, Leon

2002-01-01

Individuals having frequent abnormal heartbeats interspersed with normal heartbeats may be at an increased risk of sudden cardiac death. However, mechanistic understanding of such cardiac arrhythmias is limited. We present a visual and qualitative method to display statistical properties of abnormal heartbeats. We introduce dynamical "heartprints" which reveal characteristic patterns in long clinical records encompassing approximately 10(5) heartbeats and may provide information about underlying mechanisms. We test if these dynamics can be reproduced by model simulations in which abnormal heartbeats are generated (i) randomly, (ii) at a fixed time interval following a preceding normal heartbeat, or (iii) by an independent oscillator that may or may not interact with the normal heartbeat. We compare the results of these three models and test their limitations to comprehensively simulate the statistical features of selected clinical records. This work introduces methods that can be used to test mathematical models of arrhythmogenesis and to develop a new understanding of underlying electrophysiologic mechanisms of cardiac arrhythmia.

Vaccine and microbicide tax credit legislation introduced in Congress.

PubMed

1999-04-02

The Lifesaving Vaccine Technology Act of 1999, a House bill to stimulate HIV vaccine research and development, has been introduced by Representative Nancy Pelosi (D - Calif.), Representative Charles Rangel (D - N.Y.), and seven other cosponsors. Pelosi presents a summary of the Act, which may offer tax credits to companies for vaccine research costs in the areas of malaria, tuberculosis, HIV, or other infectious diseases. These companies would also be obligated to establish a way of maximizing access to the vaccine. The Act reflects the idea that the President and specific Federal agencies should work together to increase vaccine access. The need for this Act is shown in the 1998 survey results from Pharmaceutical Research and Manufacturers of America, which indicate that none of the 43 vaccines in development were for HIV. Information is provided for accessing the full-text of the Act.

Numerical Predictions of Damage and Failure in Carbon Fiber Reinforced Laminates Using a Thermodynamically-Based Work Potential Theory

NASA Technical Reports Server (NTRS)

Pineda, Evan Jorge; Waas, Anthony M.

2013-01-01

A thermodynamically-based work potential theory for modeling progressive damage and failure in fiber-reinforced laminates is presented. The current, multiple-internal state variable (ISV) formulation, referred to as enhanced Schapery theory (EST), utilizes separate ISVs for modeling the effects of damage and failure. Consistent characteristic lengths are introduced into the formulation to govern the evolution of the failure ISVs. Using the stationarity of the total work potential with respect to each ISV, a set of thermodynamically consistent evolution equations for the ISVs are derived. The theory is implemented into a commercial finite element code. The model is verified against experimental results from two laminated, T800/3900-2 panels containing a central notch and different fiber-orientation stacking sequences. Global load versus displacement, global load versus local strain gage data, and macroscopic failure paths obtained from the models are compared against the experimental results.

Assessing research productivity in an oncology research institute: the role of the documentation center.

PubMed Central

Ugolini, D; Bogliolo, A; Parodi, S; Casilli, C; Santi, L

1997-01-01

An evaluation method used to assess the quality of research productivity and to provide priorities for budget allocation purposes is presented. This method, developed by a working group of the National Institute for Research on Cancer (IST), Genoa, Italy, is based on the partitioning of categories of the Science Citation Index and Journal Citation Reports (SCI-JCR) into deciles, which normalizes journal impact factors in order to gauge the quality of the productivity. A second parameter related to the number of staff of each institute department co-authoring a given paper has been introduced in order to guide departmental budget allocations. The information scientists of the IST Documentation Center who participated in the working group played a pivotal role in developing the computerized database of publications, providing and analyzing data, supplying and evaluating literature on the topic, and placing international bibliographic databases at the working group's disposal. PMID:9028569

Learning to File: Reconfiguring Information and Information Work in the Early Twentieth Century.

PubMed

Robertson, Craig

2017-01-01

This article uses textbooks and advertisements to explore the formal and informal ways in which people were introduced to vertical filing in the early twentieth century. Through the privileging of "system" an ideal mode of paperwork emerged in which a clerk could "grasp" information simply by hand without having to understand or comprehend its content. A file clerk's hands and fingers became central to the representation and teaching of filing. In this way, filing offered an example of a distinctly modern form of information work. Filing textbooks sought to enhance dexterity as the rapid handling of paper came to represent information as something that existed in discrete units, in bits that could be easily extracted. Advertisements represented this mode of information work in its ideal form when they frequently erased the worker or reduced him or her to hands, as "instant" filing became "automatic" filing, with the filing cabinet presented as a machine.

[A morbidity study of intraocular foreign bodies].

PubMed

Mocanu, C; Bădescu, S

1993-01-01

190 patients presenting intraocular foreign bodies, hospitalized between 1981-1991, are examined. The study of accidents: cases showed a clear prevalence of work accidents--127 cases (66.84%); 86 of these cases occurred in industry (45.26%), the rest of 41 occurred in agriculture (21.58%). The professions most exposed to such accidents are those of locksmith, mechanic in agriculture or automobile industry. The postsurgical evolution and the incidence of complications show that intraocular foreign bodies are wosse-making factors of ocular plagues, because of anatomical structures disorganization, transparency modifications and infectious complications implied, which determined the diminishing of visual acuity in 88.08% of cases. The big percentage of work accidents in the etiology of intraocular foreign bodies emphasize the great importance of foreign the work-protection rules (regarding a especially the wearing of protection glasses) and of introducing of automation in technological processes involving great risks.

A new methodology for vibration error compensation of optical encoders.

PubMed

Lopez, Jesus; Artes, Mariano

2012-01-01

Optical encoders are sensors based on grating interference patterns. Tolerances inherent to the manufacturing process can induce errors in the position accuracy as the measurement signals stand apart from the ideal conditions. In case the encoder is working under vibrations, the oscillating movement of the scanning head is registered by the encoder system as a displacement, introducing an error into the counter to be added up to graduation, system and installation errors. Behavior improvement can be based on different techniques trying to compensate the error from measurement signals processing. In this work a new "ad hoc" methodology is presented to compensate the error of the encoder when is working under the influence of vibration. The methodology is based on fitting techniques to the Lissajous figure of the deteriorated measurement signals and the use of a look up table, giving as a result a compensation procedure in which a higher accuracy of the sensor is obtained.

Tail shortening by discrete hydrodynamics

NASA Astrophysics Data System (ADS)

Kiefer, J.; Visscher, P. B.

1982-02-01

A discrete formulation of hydrodynamics was recently introduced, whose most important feature is that it is exactly renormalizable. Previous numerical work has found that it provides a more efficient and rapidly convergent method for calculating transport coefficients than the usual Green-Kubo method. The latter's convergence difficulties are due to the well-known "long-time tail" of the time correlation function which must be integrated over time. The purpose of the present paper is to present additional evidence that these difficulties are really absent in the discrete equation of motion approach. The "memory" terms in the equation of motion are calculated accurately, and shown to decay much more rapidly with time than the equilibrium time correlations do.

The upgraded Large Plasma Device, a machine for studying frontier basic plasma physics.

PubMed

Gekelman, W; Pribyl, P; Lucky, Z; Drandell, M; Leneman, D; Maggs, J; Vincena, S; Van Compernolle, B; Tripathi, S K P; Morales, G; Carter, T A; Wang, Y; DeHaas, T

2016-02-01

In 1991 a manuscript describing an instrument for studying magnetized plasmas was published in this journal. The Large Plasma Device (LAPD) was upgraded in 2001 and has become a national user facility for the study of basic plasma physics. The upgrade as well as diagnostics introduced since then has significantly changed the capabilities of the device. All references to the machine still quote the original RSI paper, which at this time is not appropriate. In this work, the properties of the updated LAPD are presented. The strategy of the machine construction, the available diagnostics, the parameters available for experiments, as well as illustrations of several experiments are presented here.

[Application of hyper-spectral remote sensing technology in environmental protection].

PubMed

Zhao, Shao-Hua; Zhang, Feng; Wang, Qiao; Yao, Yun-Jun; Wang, Zhong-Ting; You, Dai-An

2013-12-01

Hyper-spectral remote sensing (RS) technology has been widely used in environmental protection. The present work introduces its recent application in the RS monitoring of pollution gas, green-house gas, algal bloom, water quality of catch water environment, safety of drinking water sources, biodiversity, vegetation classification, soil pollution, and so on. Finally, issues such as scarce hyper-spectral satellites, the limits of data processing and information extract are related. Some proposals are also presented, including developing subsequent satellites of HJ-1 satellite with differential optical absorption spectroscopy, greenhouse gas spectroscopy and hyper-spectral imager, strengthening the study of hyper-spectral data processing and information extraction, and promoting the construction of environmental application system.

One-Dimensional Modelling of Internal Ballistics

NASA Astrophysics Data System (ADS)

Monreal-González, G.; Otón-Martínez, R. A.; Velasco, F. J. S.; García-Cascáles, J. R.; Ramírez-Fernández, F. J.

2017-10-01

A one-dimensional model is introduced in this paper for problems of internal ballistics involving solid propellant combustion. First, the work presents the physical approach and equations adopted. Closure relationships accounting for the physical phenomena taking place during combustion (interfacial friction, interfacial heat transfer, combustion) are deeply discussed. Secondly, the numerical method proposed is presented. Finally, numerical results provided by this code (UXGun) are compared with results of experimental tests and with the outcome from a well-known zero-dimensional code. The model provides successful results in firing tests of artillery guns, predicting with good accuracy the maximum pressure in the chamber and muzzle velocity what highlights its capabilities as prediction/design tool for internal ballistics.

Numerical Simulation of Shock Interaction with Deformable Particles Using a Constrained Interface Reinitialization Scheme

NASA Astrophysics Data System (ADS)

Jackson, Thomas L.; Sridharan, Prashanth; Zhang, Ju; Balachandar, S.

2015-11-01

In this work we present axisymmetric numerical simulations of shock propagating in nitromethane over an aluminum particle for post-shock pressures up to 10 GPa. The numerical method is a finite-volume based solver on a Cartesian grid, which allows for multi-material interfaces and shocks. To preserve particle mass and volume, a novel constraint reinitialization scheme is introduced. We compute the unsteady drag coefficient as a function of post-shock pressure, and show that when normalized by post-shock conditions, the maximum drag coefficient decreases with increasing post-shock pressure. Using this information, we also present a simplified point-particle force model that can be used for mesoscale simulations.

History of osteochondral allograft transplantation.

PubMed

Nikolaou, V S; Giannoudis, P V

2017-07-01

Osteochondral defects or injuries represent the most challenging entities to treat, especially when occur to young and active patients. For centuries, it has been recognized that such defects are almost impossible to treat. However, surgeons have never stopped the effort to develop reliable methods to restore articular cartilage and salvage the endangered joint function. Osteochondral allograft transplantation in human was first introduced by Eric Lexer in 1908. Since that era, several pioneers have been worked in the field of osteochondral allotransplantation, presenting and developing the basic research, the methodology and the surgical techniques. Herein we present in brief, the history and the early clinical results of osteochondral allograft transplantation in human. Copyright © 2017 Elsevier Ltd. All rights reserved.

Discharge in Long Air Gaps; Modelling and applications

NASA Astrophysics Data System (ADS)

Beroual, A.; Fofana, I.

2016-06-01

Discharge in Long Air Gaps: Modelling and applications presents self-consistent predictive dynamic models of positive and negative discharges in long air gaps. Equivalent models are also derived to predict lightning parameters based on the similarities between long air gap discharges and lightning flashes. Macroscopic air gap discharge parameters are calculated to solve electrical, empirical and physical equations, and comparisons between computed and experimental results for various test configurations are presented and discussed. This book is intended to provide a fresh perspective by contributing an innovative approach to this research domain, and universities with programs in high-voltage engineering will find this volume to be a working example of how to introduce the basics of electric discharge phenomena.

Hippocampal-prefrontal theta-gamma coupling during performance of a spatial working memory task.

PubMed

Tamura, Makoto; Spellman, Timothy J; Rosen, Andrew M; Gogos, Joseph A; Gordon, Joshua A

2017-12-19

Cross-frequency coupling supports the organization of brain rhythms and is present during a range of cognitive functions. However, little is known about whether and how long-range cross-frequency coupling across distant brain regions subserves working memory. Here we report that theta-slow gamma coupling between the hippocampus and medial prefrontal cortex (mPFC) is augmented in a genetic mouse model of cognitive dysfunction. This increased cross-frequency coupling is observed specifically when the mice successfully perform a spatial working memory task. In wild-type mice, increasing task difficulty by introducing a long delay or by optogenetically interfering with encoding, also increases theta-gamma coupling during correct trials. Finally, epochs of high hippocampal theta-prefrontal slow gamma coupling are associated with increased synchronization of neurons within the mPFC. These findings suggest that enhancement of theta-slow gamma coupling reflects a compensatory mechanism to maintain spatial working memory performance in the setting of increased difficulty.

Comparisons of musculoskeletal complaints and data entry between a sitting and a sit-stand workstation paradigm.

PubMed

Husemann, Britta; Von Mach, Carolin Yvonne; Borsotto, Daniel; Zepf, Kirsten Isabel; Scharnbacher, Jutta

2009-06-01

Seated working positions are often regarded as a cause for discomfort in the musculoskeletal system. Performing work in different working positions--that is, alternating between sitting and standing (sit-stand workstation paradigm)--could help reduce physical complaints. The questions were whether performing office work partly in a standing position leads to reduced complaints and whether standing would change the efficiency of data entry office work. We investigated the effect of a sit-stand workstation paradigmd during experimental data entry office work on physical and psychological complaints and data entry efficiency by conducting a randomized controlled trial with 60 male participants ages 18 to 35 years. In this experiment, musculoskeletal complaints were reduced by a sit-stand workstation paradigm. A trend could be identified indicating a small but nonsignificant loss of efficiency in data entry while standing. A sit-stand workstation paradigm reduces musculoskeletal complaints without considerably affecting data entry efficiency under the presented study conditions (young male participants, short duration, fixed and controlled sit-stand workstation paradigm, simulated experimental working condition). According to the present data, implementing a sit-stand workstation paradigm can be an effective workplace health intervention to reduce musculoskeletal complaints. This experiment encourages further studies on the effectiveness of a sit-stand workstation paradigm. Experimental research and field studies that prove the reduction of complaints when introducing a sit-stand workstation paradigm in the workplace could be the basis for evidence-based recommendations regarding such interventions.

Introducing Values of Peace Education in Quranic Schools in Western Africa: Advantages and Challenges of the Islamic Peace-Building Model

ERIC Educational Resources Information Center

Abu-Nimer, Mohammed; Nasser, Ilham; Ouboulahcen, Seddik

2016-01-01

Quranic schools (QS) play a central role in the education system in the Islamic world. Despite their relatively small numbers, QS teachers play a major role in introducing Islamic values to the public. Thus, working with QS becomes a key strategy in influencing local Islamic discourse. This article introduces a case study of a program integrating…

Foundations of modelling of nonequilibrium low-temperature plasmas

NASA Astrophysics Data System (ADS)

Alves, L. L.; Bogaerts, A.; Guerra, V.; Turner, M. M.

2018-02-01

This work explains the need for plasma models, introduces arguments for choosing the type of model that better fits the purpose of each study, and presents the basics of the most common nonequilibrium low-temperature plasma models and the information available from each one, along with an extensive list of references for complementary in-depth reading. The paper presents the following models, organised according to the level of multi-dimensional description of the plasma: kinetic models, based on either a statistical particle-in-cell/Monte-Carlo approach or the solution to the Boltzmann equation (in the latter case, special focus is given to the description of the electron kinetics); multi-fluid models, based on the solution to the hydrodynamic equations; global (spatially-average) models, based on the solution to the particle and energy rate-balance equations for the main plasma species, usually including a very complete reaction chemistry; mesoscopic models for plasma-surface interaction, adopting either a deterministic approach or a stochastic dynamical Monte-Carlo approach. For each plasma model, the paper puts forward the physics context, introduces the fundamental equations, presents advantages and limitations, also from a numerical perspective, and illustrates its application with some examples. Whenever pertinent, the interconnection between models is also discussed, in view of multi-scale hybrid approaches.

Orienting the Work-Based Curriculum Towards Work Process Knowledge: A Rationale and a German Case Study

ERIC Educational Resources Information Center

Boreham, Nick

2004-01-01

The term 'work process knowledge' refers to the knowledge needed for working in flexible and innovative business environments, including those in which information and communication technologies have been introduced to integrate previously separated production functions. It involves a systems-level understanding of the work process in the…

Supercritical wing sections 2, volume 108

NASA Technical Reports Server (NTRS)

Bauer, F.; Garabedian, P.; Korn, D.; Jameson, A.; Beckmann, M. (Editor); Kuenzi, H. P. (Editor)

1975-01-01

A mathematical theory for the design and analysis of supercritical wing sections was previously presented. Examples and computer programs showing how this method works were included. The work on transonics is presented in a more definitive form. For design, a better model of the trailing edge is introduced which should eliminate a loss of fifteen or twenty percent in lift experienced with previous heavily aft loaded models, which is attributed to boundary layer separation. How drag creep can be reduced at off-design conditions is indicated. A rotated finite difference scheme is presented that enables the application of Murman's method of analysis in more or less arbitrary curvilinear coordinate systems. This allows the use of supersonic as well as subsonic free stream Mach numbers and to capture shock waves as far back on an airfoil as desired. Moreover, it leads to an effective three dimensional program for the computation of transonic flow past an oblique wing. In the case of two dimensional flow, the method is extended to take into account the displacement thickness computed by a semi-empirical turbulent boundary layer correction.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lyon, W.S.

The Analytical Chemistry Dvision of Oak Ridge National laboratory (ORNL) serves a multitude of functions for a clientele that exists both in and outside ORNL. These functions fall into the following general categories: (1) analytical research, development, and implementation; (2) programmatic research, development, and utilization; and (3) technical support. The Division is organized into five major sections, each of which may carry out any type of work falling in the three categories mentioned above. Chapters 1 through 5 of this report highlight progress within the five sections (analytical methodology, mass and emission spectrometry, radioactive materials, bio/organic analysis, and general andmore » environmental analysis) during the period January 1, 1982 to December 31, 1982. A short summary introduces each chapter to indicate work scope. Information about quality assurance and safety programs is presented in Chapter 6, along with a tabulation of analyses rendered. Publications, oral presentations, professional activities, educational programs, and seminars are cited in Chapters 7 and 8. Approximately 61 articles, 32 proceedings publications and 37 reports have been published, and 107 oral presentations were given during this reporting period.« less

Mobile, Collaborative Situated Knowledge Creation for Urban Planning

PubMed Central

Zurita, Gustavo; Baloian, Nelson

2012-01-01

Geo-collaboration is an emerging research area in computer sciences studying the way spatial, geographically referenced information and communication technologies can support collaborative activities. Scenarios in which information associated to its physical location are of paramount importance are often referred as Situated Knowledge Creation scenarios. To date there are few computer systems supporting knowledge creation that explicitly incorporate physical context as part of the knowledge being managed in mobile face-to-face scenarios. This work presents a collaborative software application supporting visually-geo-referenced knowledge creation in mobile working scenarios while the users are interacting face-to-face. The system allows to manage data information associated to specific physical locations for knowledge creation processes in the field, such as urban planning, identifying specific physical locations, territorial management, etc.; using Tablet-PCs and GPS in order to geo-reference data and information. It presents a model for developing mobile applications supporting situated knowledge creation in the field, introducing the requirements for such an application and the functionalities it should have in order to fulfill them. The paper also presents the results of utility and usability evaluations. PMID:22778639

Mobile, collaborative situated knowledge creation for urban planning.

PubMed

Zurita, Gustavo; Baloian, Nelson

2012-01-01

Geo-collaboration is an emerging research area in computer sciences studying the way spatial, geographically referenced information and communication technologies can support collaborative activities. Scenarios in which information associated to its physical location are of paramount importance are often referred as Situated Knowledge Creation scenarios. To date there are few computer systems supporting knowledge creation that explicitly incorporate physical context as part of the knowledge being managed in mobile face-to-face scenarios. This work presents a collaborative software application supporting visually-geo-referenced knowledge creation in mobile working scenarios while the users are interacting face-to-face. The system allows to manage data information associated to specific physical locations for knowledge creation processes in the field, such as urban planning, identifying specific physical locations, territorial management, etc.; using Tablet-PCs and GPS in order to geo-reference data and information. It presents a model for developing mobile applications supporting situated knowledge creation in the field, introducing the requirements for such an application and the functionalities it should have in order to fulfill them. The paper also presents the results of utility and usability evaluations.

Yang-Baxter and other relations for free-fermion and Ising models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davies, B.

1987-02-01

Eight-vertex, free fermion, and Ising models are formulated using a convention that emphasizes the algebra of the local transition operators that arise in the quantum inverse method. Equivalent classes of models, are investigated, with particular emphasis on the role of the star-triangle relations. Using these results, a natural and symmetrical parametrization is introduced and Yang-Baxter relations are constructed in an elementary way. The paper concludes with a consideration of duality, which links the present work to a recent paper of Baxter on the free fermion model.

A novel microfluidic microplate as the next generation assay platform for enzyme linked immunoassays (ELISA).

PubMed

Kai, Junhai; Puntambekar, Aniruddha; Santiago, Nelson; Lee, Se Hwan; Sehy, David W; Moore, Victor; Han, Jungyoup; Ahn, Chong H

2012-11-07

In this work we introduce a novel microfluidic enzyme linked immunoassays (ELISA) microplate as the next generation assay platform for unparalleled assay performances. A combination of microfluidic technology with standard SBS-configured 96-well microplate architecture, in the form of microfluidic microplate technology, allows for the improvement of ELISA workflows, conservation of samples and reagents, improved reaction kinetics, and the ability to improve the sensitivity of the assay by multiple analyte loading. This paper presents the design and characterization of the microfluidic microplate, and its application in ELISA.

Stinging plants: as future bio-weapon.

PubMed

Gupta, Sanjay Mohan; Kumar, Kamal

2016-09-01

In the present opinion paper, we have been introducing for the first time the stinging plants and/or their biological toxins as novel bio-threat agents that may be used for the development of bio-weapons for self-defence purpose. The selected studied stinging plants are having dual role as nutraceutical and ethno-pharmacological uses apart from their less explored stinging property. However, future detailed work is required for identification and characterization of the precise stinging chemical components that will be used for the formulation of novel bio-warfare agents for self-defence purpose.

Precipitation of Al3(Sc,Zr) Particles in a Direct Chill Cast Al-Zn-Mg-Cu-Sc-Zr Alloy During Conventional Solution Heat Treatment and its Effect on Tensile Properties

DTIC Science & Technology

2007-12-01

recrystallization during hot working and introduce additional strengthening through the formation of fine coherent Al3(Sc,Zr) particles from a super...microstructure was described in detail elsewhere [8]. TEM analysis of the as-cast alloy revealed large eutectic -forming particles, which were enriched...however suggest that this additional strengthening (~10-30 MPa) can be due to incomplete dissolution of the eutectic phases, which were present in the

Spatially-partitioned many-body vortices

NASA Astrophysics Data System (ADS)

Klaiman, S.; Alon, O. E.

2016-02-01

A vortex in Bose-Einstein condensates is a localized object which looks much like a tiny tornado storm. It is well described by mean-field theory. In the present work we go beyond the current paradigm and introduce many-body vortices. These are made of spatially- partitioned clouds, carry definite total angular momentum, and are fragmented rather than condensed objects which can only be described beyond mean-field theory. A phase diagram based on a mean-field model assists in predicting the parameters where many-body vortices occur. Implications are briefly discussed.

Experimental Optimization Methods for Multi-Element Airfoils

NASA Technical Reports Server (NTRS)

Landman, Drew; Britcher, Colin P.

1996-01-01

A modern three element airfoil model with a remotely activated flap was used to investigate optimum flap testing position using an automated optimization algorithm in wind tunnel tests. Detailed results for lift coefficient versus flap vertical and horizontal position are presented for two angles of attack: 8 and 14 degrees. An on-line first order optimizer is demonstrated which automatically seeks the optimum lift as a function of flap position. Future work with off-line optimization techniques is introduced and aerodynamic hysteresis effects due to flap movement with flow on are discussed.

Modeling and Negotiating Service Quality

NASA Astrophysics Data System (ADS)

Benbernou, Salima; Brandic, Ivona; Cappiello, Cinzia; Carro, Manuel; Comuzzi, Marco; Kertész, Attila; Kritikos, Kyriakos; Parkin, Michael; Pernici, Barbara; Plebani, Pierluigi

In this chapter the research problems of specifying and negotiating QoS and its corresponding quality documents are analyzed. For this reason, this chapter is separated into two main sections, Section 6.1 and 6.2, with each dedicated to one of the two problems, i.e., QoS specification and negotiation, respectively. Each section has a similar structure: they first introduce the problem and then, in the remaining subsections, review related work. Finally, the chapter ends with Section 6.3, which identifies research gaps and presents potential research challenges in QoS modelling, specification and negotiation.

Measurement of hepatic steatosis based on magnetic resonance images

NASA Astrophysics Data System (ADS)

Tkaczyk, Adam; Jańczyk, Wojciech; Chełstowska, Sylwia; Socha, Piotr; Mulawka, Jan

2017-08-01

The subject of this work is the usage of digital image processing to measure hepatic steatosis. To calculate this value manually it requires a lot of time and precision from the radiologist. In order to resolve this issue, a C++ application has been created. This paper describes the algorithms that have been used to solve the problem. The next chapter presents the application architecture and introduces graphical user interface. The last section describes all the tests which have been carried out to check the correctness of the results.

Design of Moisture Content Detection System

NASA Astrophysics Data System (ADS)

Wang, W. C.; Wang, L.

In this paper, a method for measuring the moisture content of grain was presented based on single chip microcomputer and capacitive sensor. The working principle of measuring moisture content is introduced and a concentric cylinder type of capacitive sensor is designed, the signal processing circuits of system are described in details. System is tested in practice and discussions are made on the various factors affecting the capacitive measuring of grain moisture based on the practical experiments, experiment results showed that the system has high measuring accuracy and good controlling capacity.

Entrainment-Zone Restratification and Flow Structures in Stratified Shear Turbulence

NASA Technical Reports Server (NTRS)

Reif, B. Anders Pettersson; Werne, Joseph; Andreassen, Oyvind; Meyer, Christian; Davis-Mansour, Melissa

2002-01-01

Late-time dynamics and morphology of a stratified turbulent shear layer are examined using 1) Reynolds-stress and heat-flux budgets, 2) the single-point structure tensors introduced by Kassinos et al. (2001), and 3) flow visualization via 3D volume rendering. Flux reversal is observed during restratification in the edges of the turbulent layer. We present a first attempt to quantify the turbulence-mean-flow interaction and to characterize the predominant flow structures. Future work will extend this analysis to earlier times and different values of the Reynolds and Richardson numbers.

Introducing AstroGen: the Astronomy Genealogy Project

NASA Astrophysics Data System (ADS)

Tenn, Joseph S.

2016-12-01

The Astronomy Genealogy Project (AstroGen), a project of the Historical Astronomy Division of the American Astronomical Society (AAS), will soon appear on the AAS website. Ultimately, it will list the world's astronomers with their highest degrees, theses for those who wrote them, academic advisors (supervisors), universities, and links to the astronomers or their obituaries, their theses when online, and more. At present the AstroGen team is working on those who earned doctorates with astronomy-related theses. We show what can be learned already, with just ten countries essentially completed.

Coupled-rearrangement-channels calculation of the three-body system under the absorbing boundary condition

NASA Astrophysics Data System (ADS)

Iwasaki, M.; Otani, R.; Ito, M.; Kamimura, M.

2016-05-01

We formulate the method of the absorbing boundary condition (ABC) in the coupled-rearrangement-channels variational method (CRCMV) for the three-body problem. In the present study, we handle the simple three-boson system, and the absorbing potential is introduced in the Jacobi coordinate in the individual rearrangement channels. The resonance parameters and the strength of the monopole breakup are compared with the complex scaling method (CSM). We have found that the CRCVM + ABC method nicely works in the threebody problem with the rearrangement channels.

Book clubs--outreach opportunities for hospital libraries.

PubMed

Stephenson, Priscilla L; Clever, Shannon; Coady, Teresa R; Ender, Deniz; Heyd, Michael; Peth, Sara

2014-01-01

Book clubs and discussion groups provide opportunities for hospital librarians to reach out to staff from all areas of their facilities while introducing them to literature reflecting participants' personal and professional interests. Librarians presenting these case studies have coordinated local book clubs where topics ranged from titles about the nature of healing, to leadership development, and patient-centered care. Some also included contemporary novels of interest to participants. No matter the setting or scope of material discussed, each group has provided unique networking opportunities for staff to meet others working in various departments of their facilities.

Selection of active elements in system reduction of vibration

NASA Astrophysics Data System (ADS)

Bialas, K.

2016-11-01

This work presents non-classical method of design of mechatronic systems. The purpose of this paper is also introduces synthesis of mechatronic system understand as design of mechatronic systems. The synthesis may be applied to modify the already existing systems in order to achieve a desired result. The system was consisted from mechanical and electrical elements. Electrical elements were used as subsystem reducing unwanted vibration of mechanical system. Electrical elements can be realized in the form of coils with movable core. The system was modelled in Matlab Simulink.

A path integral approach to asset-liability management

NASA Astrophysics Data System (ADS)

Decamps, Marc; De Schepper, Ann; Goovaerts, Marc

2006-05-01

Functional integrals constitute a powerful tool in the investigation of financial models. In the recent econophysics literature, this technique was successfully used for the pricing of a number of derivative securities. In the present contribution, we introduce this approach to the field of asset-liability management. We work with a representation of cash flows by means of a two-dimensional delta-function perturbation, in the case of a Brownian model and a geometric Brownian model. We derive closed-form solutions for a finite horizon ALM policy. The results are numerically and graphically illustrated.

Random bearings and their stability.

PubMed

Mahmoodi Baram, Reza; Herrmann, Hans J

2005-11-25

Self-similar space-filling bearings have been proposed some time ago as models for the motion of tectonic plates and appearance of seismic gaps. These models have two features which, however, seem unrealistic, namely, high symmetry in the arrangement of the particles, and lack of a lower cutoff in the size of the particles. In this work, an algorithm for generating random bearings in both two and three dimensions is presented. Introducing a lower cutoff for the sizes of the particles, the instabilities of the bearing under an external force such as gravity, are studied.

Dilution jet configurations in a reverse flow combustor. M.S. Thesis Final Report

NASA Technical Reports Server (NTRS)

Zizelman, J.

1985-01-01

Results of measurements of both temperature and velocity fields within a reverse flow combustor are presented. Flow within the combustor is acted upon by perpendicularly injected cooling jets introduced at three different locations along the inner and outer walls of the combustor. Each experiment is typified by a group of parameters: density ratio, momentum ratio, spacing ratio, and confinement parameter. Measurements of both temperature and velocity are presented in terms of normalized profiles at azimuthal positions through the turn section of the combustion chamber. Jet trajectories defined by minimum temperature and maximum velocity give a qualitative indication of the location of the jet within the cross flow. Results of a model from a previous temperature study are presented in some of the plots of data from this work.

Aerosol modelling and validation during ESCOMPTE 2001

NASA Astrophysics Data System (ADS)

Cousin, F.; Liousse, C.; Cachier, H.; Bessagnet, B.; Guillaume, B.; Rosset, R.

The ESCOMPTE 2001 programme (Atmospheric Research. 69(3-4) (2004) 241) has resulted in an exhaustive set of dynamical, radiative, gas and aerosol observations (surface and aircraft measurements). A previous paper (Atmospheric Research. (2004) in press) has dealt with dynamics and gas-phase chemistry. The present paper is an extension to aerosol formation, transport and evolution. To account for important loadings of primary and secondary aerosols and their transformation processes in the ESCOMPTE domain, the ORISAM aerosol module (Atmospheric Environment. 35 (2001) 4751) was implemented on-line in the air-quality Meso-NH-C model. Additional developments have been introduced in ORganic and Inorganic Spectral Aerosol Module (ORISAM) to improve the comparison between simulations and experimental surface and aircraft field data. This paper discusses this comparison for a simulation performed during one selected day, 24 June 2001, during the Intensive Observation Period IOP2b. Our work relies on BC and OCp emission inventories specifically developed for ESCOMPTE. This study confirms the need for a fine resolution aerosol inventory with spectral chemical speciation. BC levels are satisfactorily reproduced, thus validating our emission inventory and its processing through Meso-NH-C. However, comparisons for reactive species generally denote an underestimation of concentrations. Organic aerosol levels are rather well simulated though with a trend to underestimation in the afternoon. Inorganic aerosol species are underestimated for several reasons, some of them have been identified. For sulphates, primary emissions were introduced. Improvement was obtained too for modelled nitrate and ammonium levels after introducing heterogeneous chemistry. However, no modelling of terrigeneous particles is probably a major cause for nitrates and ammonium underestimations. Particle numbers and size distributions are well reproduced, but only in the submicrometer range. Our work points out to the need of introducing coarse dust particles to further improve the simulation of PM-10 concentrations and more accurate modelling of gas-particle interactions.

Evolving trauma and orthopedics training in the UK.

PubMed

Inaparthy, Praveen K; Sayana, Murali K; Maffulli, Nicola

2013-01-01

The ever-growing population of the UK has resulted in increasing demands on its healthcare service. Changes have been introduced in the UK medical training system to avoid loss of training time and make it more focused and productive. Modernizing medical careers (MMC) was introduced in 2005. This promised to reduce the training period for a safe trauma specialist, in trauma and orthopedics, to 10 years. At around the same time, the European Working Time Directive (EWTD) was introduced to reduce the working hours for junior doctors in training, to improve patient safety and also work-life balance of junior doctors. Introduction of the assessment tools from Orthopedic Competency assessment project (OCAP) will help tailor the training according to the needs of the trainee. The aim of this article is to review the changes in the UK orthopedic surgical training over the past two decades. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Use and valuation of native and introduced medicinal plant species in Campo Hermoso and Zetaquira, Boyacá, Colombia

PubMed Central

2013-01-01

Background Medicinal plant species contribute significantly to folk medicine in Colombia. However, few local studies have investigated whether species used are introduced or native and whether there is a difference in importance of native and introduced medicinal plant species. The aim of the present study was to describe the use of medicinal plants within two municipalities, Campo Hermoso and Zetaquira, both in the department of Boyacá, Colombia and to assess the importance of native and introduced plants to healers, amateur healers and local people. As local healers including amateur healers have no history of introduced species our working hypotheses (H1-2) were that H1: native and introduced medicinal plant species are of equal importance and H2: healers and amateur healers do not differentiate in their preferences between native and introduced medicinal plant species. Methods Ten villages were included in the study. A combination of quantitative and qualitative methods was used including questionnaires, semi-structured interviews, in- depth interviews, and open talks. Voucher specimens were collected in home gardens and during field walks. For data analysis, we calculated use value indices and Jaccard index and tested for the above hypothesis using Spearman rank-correlation coefficients and Wilcoxon-Mann–Whitney tests. Results Eighty medicinal plant species were described by locals as the most frequently used. Of these, 78 species were taxonomically identified, distributed within 41 families and 74 genera, which included 35 native species and 43 introduced. The highest valued families were: Asteraceae, Lamiaceae, Apiaceae, Rutaceae and Verbenaceae. The species ranked highest according to their Use Values, in both municipalities, were Mentha suaveolens Ehrh., Ambrosia cumanensis Kunth, and Verbena littoralis Kunth. Introduced species were more important than native ones in Zetaquira, while there was no difference in importance in Campo Hermoso. While healers relied most on the uses of native species, amateur healers were inclined to rely on introduced species. Medicinal plant administration in both municipalities follow the usual pattern: Leaves are used most commonly prepared by decoction or infusion and administrated orally. Conclusions The high proportion of introduced plant species used in the local traditional medicines is similar to the results of a number of other ethnobotanical studies and emphasise the need for efforts to record and maintain traditional knowledge on native species. PMID:23578098

Design on intelligent gateway technique in home network

NASA Astrophysics Data System (ADS)

Hu, Zhonggong; Feng, Xiancheng

2008-12-01

Based on digitization, multimedia, mobility, wide band, real-time interaction and so on,family networks, because can provide diverse and personalized synthesis service in information, correspondence work, entertainment, education and health care and so on, are more and more paid attention by the market. The family network product development has become the focus of the related industry. In this paper,the concept of the family network and the overall reference model of the family network are introduced firstly.Then the core techniques and the correspondence standard related with the family network are proposed.The key analysis is made for the function of family gateway, the function module of the software,the key technologies to client side software architecture and the trend of development of the family network entertainment seeing and hearing service and so on. Product present situation of the family gateway and the future trend of development, application solution of the digital family service are introduced. The development of the family network product bringing about the digital family network industry is introduced finally.It causes the development of software industries,such as communication industry,electrical appliances industry, computer and game and so on.It also causes the development of estate industry.

Supporting Students' Pedagogical Working Life Horizon in Higher Education

ERIC Educational Resources Information Center

Penttinen, Leena; Skaniakos, Terhi; Lairio, Marjatta

2013-01-01

In this article, we introduce a model of a pedagogical working life horizon. It encompasses questions posed by individual students concerning their future and incorporates the idea of a working life orientation to the pedagogical possibilities within education. Working life orientation consists of three elements: individual relationship, knowledge…

The underpinnings.

PubMed

Fudge, L

2001-03-01

In last month's Journal, readers were introduced to the government's Improving Working Lives Strategy. This month some of the underpinning detail will be examined in order to show what is expected from employers and employees when getting the balance right between work and life away from work.

Five Perspectives for Introducing Hemingway.

ERIC Educational Resources Information Center

Tillinghast, B. S., Jr.

1983-01-01

Suggests that the works of Ernest Hemingway can introduce young readers to (1) an intense expression of the joy of life, (2) heroic models, (3) original use of language, (4) a sharp sense of time and place, and (5) literature that can be understood at many levels. (MM)

Effect on Academic Procrastination after Introducing Augmented Reality

ERIC Educational Resources Information Center

Bendicho, Peña Fabiani; Mora, Carlos Efren; Añorbe-Díaz, Beatriz; Rivero-Rodríguez, Pedro

2017-01-01

Students suffer academic procrastination while dealing with frequent deadlines and working under pressure. This causes to delay their coursework and may affect their academic progress, despite feeling worse. Triggering students' motivation, like introducing technologies, helps to reduce procrastination. In this context, Augmented Reality has been…

Indigenous HIV Prevention Beliefs and Practices Among Low-Earning Chinese Sex Workers as Context for Introducing Female Condoms and Other Novel Prevention Options.

PubMed

Dunn, Jennifer; Zhang, Qingning; Weeks, Margaret R; Li, Jianghong; Liao, Susu; Li, Fei

2017-07-01

New interventions to reduce HIV and sexually transmitted infections (STI) among female sex workers are introduced into the context of women's existing prevention beliefs and practices. These indigenous practices affected implementation of our program to introduce female condoms to women in sex-work establishments in southern China. We used ethnographic field observations and in-depth interviews to document common prevention methods women reported using to protect themselves before and during intervention implementation. Individual, sex-work establishment, and other contextual factors, including sources of information and social and economic pressures to use or reject prevention options, shaped their perceptions and selection of these methods and affected adoption of female condoms as an additional tool. Efforts to improve uptake of effective prevention methods among low-income sex workers require attention to the context and spectrum of women's HIV/STI prevention practices when introducing innovations such as female condoms, microbicides, pre-exposure prophylaxis pills, and others, as they become available.

Systems scenarios: a tool for facilitating the socio-technical design of work systems.

PubMed

Hughes, Helen P N; Clegg, Chris W; Bolton, Lucy E; Machon, Lauren C

2017-10-01

The socio-technical systems approach to design is well documented. Recognising the benefits of this approach, organisations are increasingly trying to work with systems, rather than their component parts. However, few tools attempt to analyse the complexity inherent in such systems, in ways that generate useful, practical outputs. In this paper, we outline the 'System Scenarios Tool' (SST), which is a novel, applied methodology that can be used by designers, end-users, consultants or researchers to help design or re-design work systems. The paper introduces the SST using examples of its application, and describes the potential benefits of its use, before reflecting on its limitations. Finally, we discuss potential opportunities for the tool, and describe sets of circumstances in which it might be used. Practitioner Summary: The paper presents a novel, applied methodological tool, named the 'Systems Scenarios Tool'. We believe this tool can be used as a point of reference by designers, end-users, consultants or researchers, to help design or re-design work systems. Included in the paper are two worked examples, demonstrating the tool's application.

Teaching Engineering Students Team Work

NASA Technical Reports Server (NTRS)

Levi, Daniel

1998-01-01

The purpose of this manual is to provide professor's in engineering classes which the background necessary to use student team projects effectively. This manual describes some of the characteristics of student teams and how to use them in class. It provides a set of class activities and films which can be used to introduce and support student teams. Finally, a set of teaching modules used in freshmen, sophomore, and senior aeronautical engineering classes are presented. This manual was developed as part of a NASA sponsored project to improve the undergraduate education of aeronautical engineers. The project has helped to purchase a set of team work films which can be checked out from Cal Poly's Learning Resources Center in the Kennedy Library. Research for this project has included literature reviews on team work and cooperative learning; interviews, observations, and surveys of Cal Poly students from Industrial and Manufacturing Engineering, Aeronautical Engineering and Psychology; participation in the Aeronautical Engineering senior design lab; and interviews with engineering faculty. In addition to this faculty manual, there is a student team work manual which has been designed to help engineering students work better in teams.

Team OSCE: A Teaching Modality for Promotion of Multidisciplinary Work in Mental Health Settings.

PubMed

Sharma, Manoj Kumar; Chandra, Prabha S; Chaturvedi, Santosh K

2015-01-01

The objective structured clinical examination has been in use both as an assessment and a teaching modality within the mental health profession. It focuses on individual skill enhancement, the inter-professional understanding of role obligation is helpful in promoting competence as a team as well as role of other team members. The Team OSCE (TOSCE) is an effective way in promoting inter-professional learning. The present work assesses the trainee experience with TOSCE and its utility in clinical care. Twenty-two mental health trainees (17 male and 5 female from psychiatry, clinical psychology and psychiatric social work) got exposure to weekly OSCAF training as well as 2-3 Team OSCAFS on various aspects of clinical work as a part of their clinical training for 3 months. Rating from the trainees were taken on TOSCE feedback checklist. TOSCE was helpful in promoting the understanding role of other team members; shared decision-making, problem-solving, handling unexpected events, giving feedback and closure. The TOSCE may be introduced as a way to work on clinical performance, shared decision-making and inter-professional understanding.

Working memory, age, and hearing loss: susceptibility to hearing aid distortion.

PubMed

Arehart, Kathryn H; Souza, Pamela; Baca, Rosalinda; Kates, James M

2013-01-01

Hearing aids use complex processing intended to improve speech recognition. Although many listeners benefit from such processing, it can also introduce distortion that offsets or cancels intended benefits for some individuals. The purpose of the present study was to determine the effects of cognitive ability (working memory) on individual listeners' responses to distortion caused by frequency compression applied to noisy speech. The present study analyzed a large data set of intelligibility scores for frequency-compressed speech presented in quiet and at a range of signal-to-babble ratios. The intelligibility data set was based on scores from 26 adults with hearing loss with ages ranging from 62 to 92 years. The listeners were grouped based on working memory ability. The amount of signal modification (distortion) caused by frequency compression and noise was measured using a sound quality metric. Analysis of variance and hierarchical linear modeling were used to identify meaningful differences between subject groups as a function of signal distortion caused by frequency compression and noise. Working memory was a significant factor in listeners' intelligibility of sentences presented in babble noise and processed with frequency compression based on sinusoidal modeling. At maximum signal modification (caused by both frequency compression and babble noise), the factor of working memory (when controlling for age and hearing loss) accounted for 29.3% of the variance in intelligibility scores. Combining working memory, age, and hearing loss accounted for a total of 47.5% of the variability in intelligibility scores. Furthermore, as the total amount of signal distortion increased, listeners with higher working memory performed better on the intelligibility task than listeners with lower working memory did. Working memory is a significant factor in listeners' responses to total signal distortion caused by cumulative effects of babble noise and frequency compression implemented with sinusoidal modeling. These results, together with other studies focused on wide-dynamic range compression, suggest that older listeners with hearing loss and poor working memory are more susceptible to distortions caused by at least some types of hearing aid signal-processing algorithms and by noise, and that this increased susceptibility should be considered in the hearing aid fitting process.

Experimental and Numerical Study on Supersonic Ejectors Working with R-1234ze(E)

NASA Astrophysics Data System (ADS)

Kracik, Jan; Dvorak, Vaclav; Nguyen Van, Vu; Smierciew, Kamil

2018-06-01

These days, much effort is being put into lowering the consumption of electric energy and involving renewable energy sources. Many engineers and designers are trying to develop environment-friendly technologies worldwide. It is related to incorporating appropriate devices into such technologies. The object of this paper is to investigate these devices in connection with refrigeration systems. Ejectors can be considered such as these devices. The primary interest of this paper is to investigate the suitability of a numerical model for an ejector, which is incorporated into a refrigeration system. In the present paper, there have been investigated seven different test runs of working of the ejector with a working fluid R-1234ze(E). Some of the investigated cases seem to have a good agreement and there are no significant discrepancies between them, however, there are also cases that do not correspond to the experimental data at all. The ejector has been investigated in both on-design and off-design working modes. A comparison between the experimental and numerical data (CFD) performed by Ansys Fluent software is presented and discussed for both an ideal and a real gas model. In addition, an enhanced analytical model has been introduced for all runs of the ejector.

Astronomy New Media Outreach & Research: Moving Beyond IYA 2009

NASA Astrophysics Data System (ADS)

Gay, Pamela L.

2010-01-01

In January 2009 we entered a brave new world of online astronomy content distribution. From our first gasp of bandwidth through to today, we have worked to reach people one tweet, podcast, blogpost, and Second Life adventure at a time. Driven by our desire to get astronomy content to the world in all the online places that people go to work, socialize, and play, we have created a suite of applications that we now look to carry into the future. In this talk, we outline all the projects we created: Astronomy2009 Island in Second Life, the 365 Days of Astronomy podcast, the OverTwitter project, and more. We are hoping to carry these projects into the future and invite you to join us in building an online legacy of IYA. We will present basic audience statistics and preliminary feedback from online surveys. We also present continuation plans and introduce Astrosphere New Media, our new home for new media beyond IYA.

Semantics-driven modelling of user preferences for information retrieval in the biomedical domain.

PubMed

Gladun, Anatoly; Rogushina, Julia; Valencia-García, Rafael; Béjar, Rodrigo Martínez

2013-03-01

A large amount of biomedical and genomic data are currently available on the Internet. However, data are distributed into heterogeneous biological information sources, with little or even no organization. Semantic technologies provide a consistent and reliable basis with which to confront the challenges involved in the organization, manipulation and visualization of data and knowledge. One of the knowledge representation techniques used in semantic processing is the ontology, which is commonly defined as a formal and explicit specification of a shared conceptualization of a domain of interest. The work presented here introduces a set of interoperable algorithms that can use domain and ontological information to improve information-retrieval processes. This work presents an ontology-based information-retrieval system for the biomedical domain. This system, with which some experiments have been carried out that are described in this paper, is based on the use of domain ontologies for the creation and normalization of lightweight ontologies that represent user preferences in a determined domain in order to improve information-retrieval processes.

Advanced space optics development in freeform optics design, ceramic polishing, rapid and extreme freeform polishing

NASA Astrophysics Data System (ADS)

Geyl, R.; Leplan, H.; Ruch, E.

2017-09-01

In this paper Safran-Reosc wants to share with the space community its recent work performed in the domain of space optics. Our main topic is a study about the advantages that freeform optical surfaces can offer to advanced space optics in term of compactness or performances. We have separated smart and extreme freeform in our design exploration work. Our second topic is to answer about the immediate question following: can we manufacture and test these freeform optics? We will therefore present our freeform optics capability, report recent achievement in extreme aspheric optics polishing and introduce to the industrialisation process of large off axis optics polishing for the ESO Extremely Large Telescope primary mirror segments. Thirdly we present our R-SiC polishing layer technology for SiC material. This technique has been developed to reduce costs, risks and schedule in the manufacturing of advanced SiC optics for Vis and IR applications.

Non-commutative Chern numbers for generic aperiodic discrete systems

NASA Astrophysics Data System (ADS)

Bourne, Chris; Prodan, Emil

2018-06-01

The search for strong topological phases in generic aperiodic materials and meta-materials is now vigorously pursued by the condensed matter physics community. In this work, we first introduce the concept of patterned resonators as a unifying theoretical framework for topological electronic, photonic, phononic etc (aperiodic) systems. We then discuss, in physical terms, the philosophy behind an operator theoretic analysis used to systematize such systems. A model calculation of the Hall conductance of a 2-dimensional amorphous lattice is given, where we present numerical evidence of its quantization in the mobility gap regime. Motivated by such facts, we then present the main result of our work, which is the extension of the Chern number formulas to Hamiltonians associated to lattices without a canonical labeling of the sites, together with index theorems that assure the quantization and stability of these Chern numbers in the mobility gap regime. Our results cover a broad range of applications, in particular, those involving quasi-crystalline, amorphous as well as synthetic (i.e. algorithmically generated) lattices.

Complex temporal topic evolution modelling using the Kullback-Leibler divergence and the Bhattacharyya distance.

PubMed

Andrei, Victor; Arandjelović, Ognjen

2016-12-01

The rapidly expanding corpus of medical research literature presents major challenges in the understanding of previous work, the extraction of maximum information from collected data, and the identification of promising research directions. We present a case for the use of advanced machine learning techniques as an aide in this task and introduce a novel methodology that is shown to be capable of extracting meaningful information from large longitudinal corpora and of tracking complex temporal changes within it. Our framework is based on (i) the discretization of time into epochs, (ii) epoch-wise topic discovery using a hierarchical Dirichlet process-based model, and (iii) a temporal similarity graph which allows for the modelling of complex topic changes. More specifically, this is the first work that discusses and distinguishes between two groups of particularly challenging topic evolution phenomena: topic splitting and speciation and topic convergence and merging, in addition to the more widely recognized emergence and disappearance and gradual evolution. The proposed framework is evaluated on a public medical literature corpus.

Pulse Front Tilt and Laser Plasma Acceleration

NASA Astrophysics Data System (ADS)

Mittelberger, Daniel; Thévenet, Maxence; Nakamura, Kei; Lehe, Remi; Gonsalves, Anthony; Benedetti, Carlo; Leemans, Wim

2017-10-01

Pulse front tilt (PFT) is potentially present in any CPA laser system, but its effects may be overlooked because spatiotemporal pulse characterization is considerably more involved than measuring only spatial or temporal profile. PFT is particularly important for laser plasma accelerators (LPA) because it influences electron beam injection and steering. In this work, experimental results from the BELLA Center will be presented that demonstrate the effect of optical grating misalignment and optical compression, resulting in PFT, on accelerator performance. Theoretical models of laser and electron beam steering will be introduced based on particle-in-cell simulations showing distortion of the plasma wake. Theoretical predictions will be compared with experiments and complimentary simulations, and tolerances on PFT and optical compressor alignment will be developed as a function of LPA performance requirements. This work was supported by the Office of High Energy Physics, Office of Science, US Department of Energy under Contract DE-AC02-05CH11231 and the National Science Foundation under Grant PHY-1415596.

Two-Component Noncollinear Time-Dependent Spin Density Functional Theory for Excited State Calculations.

PubMed

Egidi, Franco; Sun, Shichao; Goings, Joshua J; Scalmani, Giovanni; Frisch, Michael J; Li, Xiaosong

2017-06-13

We present a linear response formalism for the description of the electronic excitations of a noncollinear reference defined via Kohn-Sham spin density functional methods. A set of auxiliary variables, defined using the density and noncollinear magnetization density vector, allows the generalization of spin density functional kernels commonly used in collinear DFT to noncollinear cases, including local density, GGA, meta-GGA and hybrid functionals. Working equations and derivations of functional second derivatives with respect to the noncollinear density, required in the linear response noncollinear TDDFT formalism, are presented in this work. This formalism takes all components of the spin magnetization into account independent of the type of reference state (open or closed shell). As a result, the method introduced here is able to afford a nonzero local xc torque on the spin magnetization while still satisfying the zero-torque theorem globally. The formalism is applied to a few test cases using the variational exact-two-component reference including spin-orbit coupling to illustrate the capabilities of the method.

The Parallel Episodic Processing (PEP) model: dissociating contingency and conflict adaptation in the item-specific proportion congruent paradigm.

PubMed

Schmidt, James R

2013-01-01

The present work introduces a computational model, the Parallel Episodic Processing (PEP) model, which demonstrates that contingency learning achieved via simple storage and retrieval of episodic memories can explain the item-specific proportion congruency effect in the colour-word Stroop paradigm. The current work also presents a new experimental procedure to more directly dissociate contingency biases from conflict adaptation (i.e., proportion congruency). This was done with three different types of incongruent words that allow a comparison of: (a) high versus low contingency while keeping proportion congruency constant, and (b) high versus low proportion congruency while keeping contingency constant. Results demonstrated a significant contingency effect, but no effect of proportion congruence. It was further shown that the proportion congruency associated with the colour does not matter, either. Thus, the results quite directly demonstrate that ISPC effects are not due to conflict adaptation, but instead to contingency learning biases. Copyright © 2012 Elsevier B.V. All rights reserved.

The effect of long-term working memory through personalization applied to free recall: uncurbing the primacy-effect enthusiasm.

PubMed

Guida, Alessandro; Gras, Doriane; Noel, Yvonnick; Le Bohec, Olivier; Quaireau, Christophe; Nicolas, Serge

2013-05-01

In this study, a personalization method (Guida, Tardieu, & Nicolas, European Journal of Cognitive Psychology, 21: 862-896 2009) was applied to a free-recall task. Fifteen pairs of words, composed of an object and a location, were presented to 93 participants, who had to mentally associate each pair and subsequently recall the objects. A 30-s delay was introduced on half of the trials, the presentation rate was manipulated (5 or 10 s per item), and verbal and visuospatial working memory tests were administered to test for their effects on the serial curve. Two groups were constituted: a personalized group, for whom the locations were well-known places on their university campus, and a nonpersonalized group, for whom the locations did not refer to known places. Since personalization putatively operationalizes long-term working memory (Ericsson & Kintsch, Psychological Review, 102: 211-245 1995)-namely, the capacity to store information reliably and rapidly in long-term memory-and if we take a dual-store approach to memory, the personalization advantage would be expected to be greater for pre-recency than for recency items. Overall, the results were compatible with long-term working memory theory. They contribute to validating the personalization method as a methodology to characterize the contribution of long-term memory storage to performance in working memory tasks.

Los Alamos Science: The Human Genome Project. Number 20, 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooper, N G; Shea, N

1992-01-01

This article provides a broad overview of the Human Genome Project, with particular emphasis on work being done at Los Alamos. It tries to emphasize the scientific aspects of the project, compared to the more speculative information presented in the popular press. There is a brief introduction to modern genetics, including a review of classic work. There is a broad overview of the Genome Project, describing what the project is, what are some of its major five-year goals, what are major technological challenges ahead of the project, and what can the field of biology, as well as society expect tomore » see as benefits from this project. Specific results on the efforts directed at mapping chromosomes 16 and 5 are discussed. A brief introduction to DNA libraries is presented, bearing in mind that Los Alamos has housed such libraries for many years prior to the Genome Project. Information on efforts to do applied computational work related to the project are discussed, as well as experimental efforts to do rapid DNA sequencing by means of single-molecule detection using applied spectroscopic methods. The article introduces the Los Alamos staff which are working on the Genome Project, and concludes with brief discussions on ethical, legal, and social implications of this work; a brief glimpse of genetics as it may be practiced in the next century; and a glossary of relevant terms.« less

Los Alamos Science: The Human Genome Project. Number 20, 1992

DOE R&D Accomplishments Database

Cooper, N. G.; Shea, N. eds.

1992-01-01

This document provides a broad overview of the Human Genome Project, with particular emphasis on work being done at Los Alamos. It tries to emphasize the scientific aspects of the project, compared to the more speculative information presented in the popular press. There is a brief introduction to modern genetics, including a review of classic work. There is a broad overview of the Genome Project, describing what the project is, what are some of its major five-year goals, what are major technological challenges ahead of the project, and what can the field of biology, as well as society expect to see as benefits from this project. Specific results on the efforts directed at mapping chromosomes 16 and 5 are discussed. A brief introduction to DNA libraries is presented, bearing in mind that Los Alamos has housed such libraries for many years prior to the Genome Project. Information on efforts to do applied computational work related to the project are discussed, as well as experimental efforts to do rapid DNA sequencing by means of single-molecule detection using applied spectroscopic methods. The article introduces the Los Alamos staff which are working on the Genome Project, and concludes with brief discussions on ethical, legal, and social implications of this work; a brief glimpse of genetics as it may be practiced in the next century; and a glossary of relevant terms.

Computational Work to Support FAP/SRW Variable-Speed Power-Turbine Development

NASA Technical Reports Server (NTRS)

Ameri, Ali A.

2012-01-01

The purpose of this report is to document the work done to enable a NASA CFD code to model the transition on a blade. The purpose of the present work is to down-select a transition model that would allow the flow simulation of a Variable-Speed Power-Turbine (VSPT) to be accurately performed. The modeling is to be ultimately performed to also account for the blade row interactions and effect on transition and therefore accurate accounting for losses. The present work is limited to steady flows. The low Reynolds number k-omega model of Wilcox and a modified version of same will be used for modeling of transition on experimentally measured blade pressure and heat transfer. It will be shown that the k-omega model and its modified variant fail to simulate the transition with any degree of accuracy. A case is therefore made for more accurate transition models. Three-equation models based on the work of Mayle on Laminar Kinetic Energy were explored and the Walters and Leylek model which was thought to be in a more mature state of development is introduced and implemented in the Glenn-HT code. Two-dimensional flat plate results and three-dimensional results for flow over turbine blades and the resulting heat transfer and its transitional behavior are reported. It is shown that the transition simulation is much improved over the baseline k-omega model.

Static, Dynamic and Semantic Dimensions: Towards a Multidisciplinary Approach of Social Networks Analysis

NASA Astrophysics Data System (ADS)

Thovex, Christophe; Trichet, Francky

The objective of our work is to extend static and dynamic models of Social Networks Analysis (SNA), by taking conceptual aspects of enterprises and institutions social graph into account. The originality of our multidisciplinary work is to introduce abstract notions of electro-physic to define new measures in SNA, for new decision-making functions dedicated to Human Resource Management (HRM). This paper introduces a multidimensional system and new measures: (1) a tension measure for social network analysis, (2) an electrodynamic, predictive and semantic system for recommendations on social graphs evolutions and (3) a reactance measure used to evaluate the individual stress at work of the members of a social network.

Marilyn Zurmuehlen's Working Papers in Art Education, 1993. Number 12.

ERIC Educational Resources Information Center

Zurmuehlen, Marilyn, Ed.; Thunder-McGuire, Steve, Ed.

This collection of doctoral student research papers begins with a biographic dedication to Marilyn Zurmuehlen. The papers and their authors are introduced in brief discourse by a faculty mentor (mentor's introduction). Articles include: (1) "Feminism < > Dialogic Interaction < > Research (Miriam Cooley), introduced by Elizabeth J.…

Introducing Positive Psychology to SLA

ERIC Educational Resources Information Center

MacIntyre, Peter D.; Mercer, Sarah

2014-01-01

Positive psychology is a rapidly expanding subfield in psychology that has important implications for the field of second language acquisition (SLA). This paper introduces positive psychology to the study of language by describing its key tenets. The potential contributions of positive psychology are contextualized with reference to prior work,…

Public nursing home staff's experience of participating in an intervention aimed at enhancing their self-esteem.

PubMed

Wadensten, Barbro; Engström, Maria; Häggström, Elisabeth

2009-11-01

The aim of the present study was to gain an understanding of how nursing staff experienced participating in a training programme aimed at strengthening their self-esteem and empowering them, to determine whether participation benefited them in any way, and to describe their opinions about possible benefits or disadvantages. Staff working in institutions such as nursing homes have a low status in society. A training programme was introduced to staff in a public nursing home. It focused on helping them understand factors in the work situation that influence them and on empowering them. The study was explorative and qualitative in design. The participants in the programme were generally satisfied with it. Their opinions about the benefits they received from the programme can be described using three themes: 'improved communication skills', 'enhanced self-esteem' and 'sees work in a different light'. The most important finding of the present study is that it was possible to strengthen and empower staff. Staff members were generally pleased and satisfied with the content/organization of the training programme. They felt the programme had been of value to them by improving their communication skills and increasing their self-esteem. The present result could be of value to managers and educators working in the area of nursing home care when planning education and development activities for staff. Learning to communicate better and understand the social structure at the workplace could improve staff members' self-esteem, thereby enhancing the work situation and atmosphere as well as empowering the individuals.

The Operator Guide: An Ambient Persuasive Interface in the Factory

NASA Astrophysics Data System (ADS)

Meschtscherjakov, Alexander; Reitberger, Wolfgang; Pöhr, Florian; Tscheligi, Manfred

In this paper we introduce the context of a semiconductor factory as a promising area for the application of innovative interaction approaches. In order to increase efficiency ambient persuasive interfaces, which influence the operators' behaviour to perform in an optimized way, could constitute a potential strategy. We present insights gained from qualitative studies conducted in a specific semiconductor factory and provide a description of typical work processes and already deployed interfaces in this context. These findings informed the design of a prototype of an ambient persuasive interface within this realm - the "Operator Guide". Its overall aim is to improve work efficiency, while still maintaining a minimal error rate. We provide a detailed description of the Operator Guide along with an outlook of the next steps within a user-centered design approach.

Synthesis of Arbitrary Quantum Circuits to Topological Assembly: Systematic, Online and Compact.

PubMed

Paler, Alexandru; Fowler, Austin G; Wille, Robert

2017-09-05

It is challenging to transform an arbitrary quantum circuit into a form protected by surface code quantum error correcting codes (a variant of topological quantum error correction), especially if the goal is to minimise overhead. One of the issues is the efficient placement of magic state distillation sub circuits, so-called distillation boxes, in the space-time volume that abstracts the computation's required resources. This work presents a general, systematic, online method for the synthesis of such circuits. Distillation box placement is controlled by so-called schedulers. The work introduces a greedy scheduler generating compact box placements. The implemented software, whose source code is available at www.github.com/alexandrupaler/tqec, is used to illustrate and discuss synthesis examples. Synthesis and optimisation improvements are proposed.

Research on the rolling moment in the symmetrical and asymmetrical rolling process

NASA Astrophysics Data System (ADS)

Alexa, V.; Raţiu, S. A.; Kiss, I.; Cioată, C. G.

2017-01-01

Research distribution the rolling moments symmetrical and asymmetrical report presents great importance both in theory and to introduce clarifications to the calculation of rolling resistance line assemblies. Clarifying individuals of metallic material deformation between the rolls single cylinder diameters act of any difference of work and analysis of advance and delay phenomena. Torque drive value for each of the rolling cylinders was done by reducing the thickness of the laminate samples, an experimental facility located in the laboratory of plastic deformation of the Faculty of Engineering Hunedoara. The analysis of research results show that in terms of power consumption for deformation and safety equipment in operation is rational for mills which require such a difference between the work rolls to execute about one cylinder operated.

Sources and vicissitudes of being in D. W. Winnicott's work.

PubMed

Green, André

2010-01-01

The author questions the reasons for the appearance of the concept of being in Winnicott's work four years before his death. Winnicott illustrated his concept of being by describing a patient in whom he found a complete dissociation of male and female elements. Insisting on the role of the environment and the part played by the mother, Winnicott considered that the pure female element relates to the breast or the mother, in the sense that the baby is becoming the breast. He opined that instinct or drive has nothing to do with this. The present paper discusses this viewpoint at length, comparing Winnicott's and Freud's positions. It is noted that Winnicott introduced his concept of being at a time when he felt threatened by his own mortality.

The Smartphone-Based Offline Indoor Location Competition at IPIN 2016: Analysis and Future Work.

PubMed

Torres-Sospedra, Joaquín; Jiménez, Antonio R; Knauth, Stefan; Moreira, Adriano; Beer, Yair; Fetzer, Toni; Ta, Viet-Cuong; Montoliu, Raul; Seco, Fernando; Mendoza-Silva, Germán M; Belmonte, Oscar; Koukofikis, Athanasios; Nicolau, Maria João; Costa, António; Meneses, Filipe; Ebner, Frank; Deinzer, Frank; Vaufreydaz, Dominique; Dao, Trung-Kien; Castelli, Eric

2017-03-10

This paper presents the analysis and discussion of the off-site localization competition track, which took place during the Seventh International Conference on Indoor Positioning and Indoor Navigation (IPIN 2016). Five international teams proposed different strategies for smartphone-based indoor positioning using the same reference data. The competitors were provided with several smartphone-collected signal datasets, some of which were used for training (known trajectories), and others for evaluating (unknown trajectories). The competition permits a coherent evaluation method of the competitors' estimations, where inside information to fine-tune their systems is not offered, and thus provides, in our opinion, a good starting point to introduce a fair comparison between the smartphone-based systems found in the literature. The methodology, experience, feedback from competitors and future working lines are described.

Discovering the Network and Communicating amoungst Astronomy Librarians: or Finding my Feet

NASA Astrophysics Data System (ADS)

Hurn, Mark David

A light-hearted description of starting work and finding the networks in astronomy libraries. Starting with a description of my librarianship career before astronomy. Networking with (SLIL Special Librarians In London). Why I applied for this job. Starting work at the Institute of Astronomy. A brief description of the Institute library. A glorious tradition: IoA librarians past and present. Getting to know the computers. Joining email lists (ASTROLIB and SLAPAM). Adventures with email and web forums. Saying hello, introducing myself to other Astronomy librarians (RAS and ROE). Other libraries and other networks (SLIC and CLG) in Cambridge. Other libraries in Britain. Unusual inter-library loan sources. Getting on with the job: my plans for the future. Looking back: where I went right and where I went wrong.

Mapping the audit traces of interdisciplinary collaboration: bridging and blending between choreography and cognitive science

PubMed Central

Barnard, Philip; deLahunta, Scott

2017-01-01

ABSTRACT Two long-term sci–art research projects are described and positioned in the broader conceptual landscape of interdisciplinary collaboration. Both projects were aimed at understanding and augmenting choreographic decision-making and both were grounded in research conducted within a leading contemporary dance company. In each case, the work drew upon methods and theory from the cognitive sciences, and both had a direct impact on the way in which the company made new work. In the synthesis presented here the concept of an audit trace is introduced. Audit traces identify how specific classes of knowledge are used and transformed not only within the arts or sciences but also when arts practice is informed by science or when arts practice informs science. PMID:29308084

Application of Generative Topographic Mapping to Gear Failures Monitoring

NASA Astrophysics Data System (ADS)

Liao, Guanglan; Li, Weihua; Shi, Tielin; Rao, Raj B. K. N.

2002-07-01

The Generative Topographic Mapping (GTM) model is introduced as a probabilistic re-formation of the self-organizing map and has already been used in a variety of applications. This paper presents a study of the GTM in industrial gear failures monitoring. Vibration signals are analyzed using the GTM model, and the results show that gear feature data sets can be projected into a two-dimensional space and clustered in different areas according to their conditions, which can classify and identify clearly a gear work condition with cracked or broken tooth compared with the normal condition. With the trace of the image points in the two-dimensional space, the variation of gear work conditions can be observed visually, therefore, the occurrence and varying trend of gear failures can be monitored in time.

The concept of physical surface in nuclear matter

NASA Astrophysics Data System (ADS)

Mazilu, Nicolae; Agop, Maricel

2015-02-01

The main point of a physical definition of surface forces in the matter in general, especially in the nuclear matter, is that the curvature of surfaces and its variation should be physically defined. The forces are therefore just the vehicles of introducing physics. The problem of mathematical definition of a surface in term of the curvature parameters thus naturally occurs. The present work addresses this problem in terms of the asymptotic directions of a surface in a point. A physical meaning of these parameters is given, first in terms of inertial forces, then in terms of a differential theory of colors, whereby the space of curvature parameters is identified with the color space. The work concludes with an image of the evolution of a local portion of a surface.

Developing measures for information ergonomics in knowledge work.

PubMed

Franssila, Heljä; Okkonen, Jussi; Savolainen, Reijo

2016-03-01

Information ergonomics is an evolving application domain of ergonomics focusing on the management of workload in the real-world contexts of information-intensive tasks. This study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, five key dimensions of information ergonomics were identified: contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity. In total, 24 measures focusing on the above dimensions were constructed. The measures include, for example, the number of fragmented work tasks per work day. The measures were preliminarily tested in two Finnish organisations, making use of empirical data gathered by interviews, electronic questionnaires and log data applications tracking work processes on personal computers. The measures are applicable to the evaluation of information ergonomics, even though individual measures vary with regard to the amount of work and time needed for data analysis. Practitioner Summary: The study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, 24 measures were constructed and tested empirically. The measures focus on contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity.

Development of a compact cryocooler system for high temperature superconductor filter application

NASA Astrophysics Data System (ADS)

Pang, Xiaomin; Wang, Xiaotao; Zhu, Jian; Chen, Shuai; Hu, Jianying; Dai, Wei; Li, Haibing; Luo, Ercang

2016-12-01

Seeking a higher specific power of the pulse tube cryocooler is an important trend in recent studies. High frequency operation (100 Hz and higher), combined with co-axial configuration, serve as a good option to meet this requirement. This paper introduces a high efficiency co-axial pulse tube cryocooler operating at around 100 Hz. The whole system weighs 4.3 kg (not including the radiator) with a nominal input power of 320 W, namely, power density of the system is around 74 W/kg. The envelop dimensions of the cold finger itself is about 84 mm in length and 23 mm in outer diameter. Firstly, numerical model for designing the system and some simulation results are briefly introduced. Distributions of pressure wave, the phase difference between the pressure wave and the volume flow rate and different energy flow are presented for a better understanding of the system. After this, some of the characterizing experimental results are presented. At an optimum working point, the cooling power at 80 K reaches 16 W with an input electric power of 300 W, which leads to an efficiency of 15.5% of Carnot.

Parallel Distributed Processing at 25: further explorations in the microstructure of cognition.

PubMed

Rogers, Timothy T; McClelland, James L

2014-08-01

This paper introduces a special issue of Cognitive Science initiated on the 25th anniversary of the publication of Parallel Distributed Processing (PDP), a two-volume work that introduced the use of neural network models as vehicles for understanding cognition. The collection surveys the core commitments of the PDP framework, the key issues the framework has addressed, and the debates the framework has spawned, and presents viewpoints on the current status of these issues. The articles focus on both historical roots and contemporary developments in learning, optimality theory, perception, memory, language, conceptual knowledge, cognitive control, and consciousness. Here we consider the approach more generally, reviewing the original motivations, the resulting framework, and the central tenets of the underlying theory. We then evaluate the impact of PDP both on the field at large and within specific subdomains of cognitive science and consider the current role of PDP models within the broader landscape of contemporary theoretical frameworks in cognitive science. Looking to the future, we consider the implications for cognitive science of the recent success of machine learning systems called "deep networks"-systems that build on key ideas presented in the PDP volumes. Copyright © 2014 Cognitive Science Society, Inc.

Concurrent topology optimization for minimization of total mass considering load-carrying capabilities and thermal insulation simultaneously

NASA Astrophysics Data System (ADS)

Long, Kai; Wang, Xuan; Gu, Xianguang

2017-09-01

The present work introduces a novel concurrent optimization formulation to meet the requirements of lightweight design and various constraints simultaneously. Nodal displacement of macrostructure and effective thermal conductivity of microstructure are regarded as the constraint functions, which means taking into account both the load-carrying capabilities and the thermal insulation properties. The effective properties of porous material derived from numerical homogenization are used for macrostructural analysis. Meanwhile, displacement vectors of macrostructures from original and adjoint load cases are used for sensitivity analysis of the microstructure. Design variables in the form of reciprocal functions of relative densities are introduced and used for linearization of the constraint function. The objective function of total mass is approximately expressed by the second order Taylor series expansion. Then, the proposed concurrent optimization problem is solved using a sequential quadratic programming algorithm, by splitting into a series of sub-problems in the form of the quadratic program. Finally, several numerical examples are presented to validate the effectiveness of the proposed optimization method. The various effects including initial designs, prescribed limits of nodal displacement, and effective thermal conductivity on optimized designs are also investigated. An amount of optimized macrostructures and their corresponding microstructures are achieved.

Fast track in hip arthroplasty

PubMed Central

Hansen, Torben Bæk

2017-01-01

‘Fast-track’ surgery was introduced more than 20 years ago and may be defined as a co-ordinated peri-operative approach aimed at reducing surgical stress and facilitating post-operative recovery.The fast-track programmes have now been introduced into total hip arthroplasty (THA) surgery with reduction in post-operative length of stay, shorter convalescence and rapid functional recovery without increased morbidity and mortality. This has been achieved by focusing on a multidisciplinary collaboration and establishing ‘fast-track’ units, with a well-defined organisational set-up tailored to deliver an accelerated peri-operative course of fast-track surgical THA procedures.Fast-track THA surgery now works extremely well in the standard THA patient. However, all patients are different and fine-tuning of the multiple areas in fast-track pathways to get patients with special needs or high co-morbidity burden through a safe and effective fast-track THA pathway is important.In this narrative review, the principles of fast-track THA surgery are presented together with the present status of implementation and perspectives for further improvements. Cite this article: EFORT Open Rev 2017;2. DOI: 10.1302/2058-5241.2.160060. Originally published online at www.efortopenreviews.org PMID:28630756

Acoustic scattering from phononic crystals with complex geometry.

PubMed

Kulpe, Jason A; Sabra, Karim G; Leamy, Michael J

2016-05-01

This work introduces a formalism for computing external acoustic scattering from phononic crystals (PCs) with arbitrary exterior shape using a Bloch wave expansion technique coupled with the Helmholtz-Kirchhoff integral (HKI). Similar to a Kirchhoff approximation, a geometrically complex PC's surface is broken into a set of facets in which the scattering from each facet is calculated as if it was a semi-infinite plane interface in the short wavelength limit. When excited by incident radiation, these facets introduce wave modes into the interior of the PC. Incorporation of these modes in the HKI, summed over all facets, then determines the externally scattered acoustic field. In particular, for frequencies in a complete bandgap (the usual operating frequency regime of many PC-based devices and the requisite operating regime of the presented theory), no need exists to solve for internal reflections from oppositely facing edges and, thus, the total scattered field can be computed without the need to consider internal multiple scattering. Several numerical examples are provided to verify the presented approach. Both harmonic and transient results are considered for spherical and bean-shaped PCs, each containing over 100 000 inclusions. This facet formalism is validated by comparison to an existing self-consistent scattering technique.

Identification and Modelling of the In-Plane Reinforcement Orientation Variations in a CFRP Laminate Produced by Manual Lay-Up

NASA Astrophysics Data System (ADS)

Davila, Yves; Crouzeix, Laurent; Douchin, Bernard; Collombet, Francis; Grunevald, Yves-Henri

2017-08-01

Reinforcement angle orientation has a significant effect on the mechanical properties of composite materials. This work presents a methodology to introduce variable reinforcement angles into finite element (FE) models of composite structures. The study of reinforcement orientation variations uses meta-models to identify and control a continuous variation across the composite ply. First, the reinforcement angle is measured through image analysis techniques of the composite plies during the lay-up phase. Image analysis results show that variations in the mean ply orientations are between -0.5 and 0.5° with standard deviations ranging between 0.34 and 0.41°. An automatic post-treatment of the images determines the global and local angle variations yielding good agreements visually and numerically between the analysed images and the identified parameters. A composite plate analysed at the end of the cooling phase is presented as a case of study. Here, the variation in residual strains induced by the variability in the reinforcement orientation are up to 28% of the strain field of the homogeneous FE model. The proposed methodology has shown its capabilities to introduce material and geometrical variability into FE analysis of layered composite structures.

Identification and Modelling of the In-Plane Reinforcement Orientation Variations in a CFRP Laminate Produced by Manual Lay-Up

NASA Astrophysics Data System (ADS)

Davila, Yves; Crouzeix, Laurent; Douchin, Bernard; Collombet, Francis; Grunevald, Yves-Henri

2018-06-01

Reinforcement angle orientation has a significant effect on the mechanical properties of composite materials. This work presents a methodology to introduce variable reinforcement angles into finite element (FE) models of composite structures. The study of reinforcement orientation variations uses meta-models to identify and control a continuous variation across the composite ply. First, the reinforcement angle is measured through image analysis techniques of the composite plies during the lay-up phase. Image analysis results show that variations in the mean ply orientations are between -0.5 and 0.5° with standard deviations ranging between 0.34 and 0.41°. An automatic post-treatment of the images determines the global and local angle variations yielding good agreements visually and numerically between the analysed images and the identified parameters. A composite plate analysed at the end of the cooling phase is presented as a case of study. Here, the variation in residual strains induced by the variability in the reinforcement orientation are up to 28% of the strain field of the homogeneous FE model. The proposed methodology has shown its capabilities to introduce material and geometrical variability into FE analysis of layered composite structures.

A computer simulation model of Wolbachia invasion for disease vector population modification.

PubMed

Guevara-Souza, Mauricio; Vallejo, Edgar E

2015-10-05

Wolbachia invasion has been proved to be a promising alternative for controlling vector-borne diseases, particularly Dengue fever. Creating computer models that can provide insight into how vector population modification can be achieved under different conditions would be most valuable for assessing the efficacy of control strategies for this disease. In this paper, we present a computer model that simulates the behavior of native mosquito populations after the introduction of mosquitoes infected with the Wolbachia bacteria. We studied how different factors such as fecundity, fitness cost of infection, migration rates, number of populations, population size, and number of introduced infected mosquitoes affect the spread of the Wolbachia bacteria among native mosquito populations. Two main scenarios of the island model are presented in this paper, with infected mosquitoes introduced into the largest source population and peripheral populations. Overall, the results are promising; Wolbachia infection spreads among native populations and the computer model is capable of reproducing the results obtained by mathematical models and field experiments. Computer models can be very useful for gaining insight into how Wolbachia invasion works and are a promising alternative for complementing experimental and mathematical approaches for vector-borne disease control.

Evolution of the frequency chirp of Gaussian pulses and beams when passing through a pulse compressor.

PubMed

Li, Derong; Lv, Xiaohua; Bowlan, Pamela; Du, Rui; Zeng, Shaoqun; Luo, Qingming

2009-09-14

The evolution of the frequency chirp of a laser pulse inside a classical pulse compressor is very different for plane waves and Gaussian beams, although after propagating through the last (4th) dispersive element, the two models give the same results. In this paper, we have analyzed the evolution of the frequency chirp of Gaussian pulses and beams using a method which directly obtains the spectral phase acquired by the compressor. We found the spatiotemporal couplings in the phase to be the fundamental reason for the difference in the frequency chirp acquired by a Gaussian beam and a plane wave. When the Gaussian beam propagates, an additional frequency chirp will be introduced if any spatiotemporal couplings (i.e. angular dispersion, spatial chirp or pulse front tilt) are present. However, if there are no couplings present, the chirp of the Gaussian beam is the same as that of a plane wave. When the Gaussian beam is well collimated, the introduced frequency chirp predicted by the plane wave and Gaussian beam models are in closer agreement. This work improves our understanding of pulse compressors and should be helpful for optimizing dispersion compensation schemes in many applications of femtosecond laser pulses.

Commercialization of the Chevron FCC vanadium trap

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kennedy, J.V.; Kuehler, C.W.; Krishna, A.S.

1995-09-01

Vanadium, present to varying degrees in FCC feed, deposits on the catalyst virtually quantitatively in the cracking process. In resid operations, vanadium levels on catalyst can reach 10,000 ppm at typical catalyst make-up rates. Once on the catalyst, vanadium destroys the zeolite and restricts access to active sites. This reduces catalyst activity. A vanadium trap is a material that when introduced into the catalyst inventory selectively reacts with migrating vanadium, thus protecting the zeolite and other active components of the catalyst. The trap may be incorporated into the catalyst, or introduced as a separate particle. Only a limited amount ofmore » trap can be incorporated into the catalyst without limiting the amount of zeolite that can be included. Gulf began development of a vanadium trap during the early 1980`s. The work produced a variety of promising materials whose use as vanadium traps was subsequently patented. The work ultimately led to a formulation with a phase very active for trapping vanadium while still quite sulfur tolerant. Based on these results, an extensive pilot plant evaluation was undertaken by Chevron after the Chevron-Gulf merger to better simulate commercial operation. The paper describes pilot plant tests as well as 3 commercial tests of this vanadium trap.« less

Relational responsibilities in responsive evaluation.

PubMed

Visse, Merel; Abma, Tineke A; Widdershoven, Guy A M

2012-02-01

This article explores how we can enhance our understanding of the moral responsibilities in daily, plural practices of responsive evaluation. It introduces an interpretive framework for understanding the moral aspects of evaluation practice. The framework supports responsive evaluators to better understand and handle their moral responsibilities. A case is introduced to illustrate our argument. Responsive evaluation contributes to the design and implementation of policy by working with stakeholders and coordinating the evaluation process as a relationally responsible practice. Responsive evaluation entails a democratic process in which the evaluator fosters and enters a partnership with stakeholders. The responsibilities of an evaluator generally involve issues such as 'confidentiality', 'accountability' and 'privacy'. The responsive evaluator has specific responsibilities, for example to include stakeholders and vulnerable groups and to foster an ongoing dialogue. In addition, responsive evaluation involves a relational responsibility, which becomes present in daily situations in which stakeholders express expectations and voice demands. In our everyday work as evaluators, it is difficult to respond to all these demands at the same time. In addition, this article demonstrates that novice evaluators experience challenges concerning over- and underidenfitication with stakeholders. Guidelines and quality criteria on how to act are helpful, but need interpretation and application to the unique situation at hand. Copyright © 2011 Elsevier Ltd. All rights reserved.

Biological and communication skills needed for introduced fish biologists

USGS Publications Warehouse

Bonar, Scott A.

2016-01-01

What skills and knowledge will a new graduate seeking employment need to work with introduced fishes? Clearly, success in introduced species management—similar to other disciplines in fisheries—requires a mixture of scientific and communication skills. However, specific abilities especially important to a biologist who manages introduced fishes should be highlighted. Unlike most other management strategies, stocking an introduced species can result in unintended and irreversible impacts, so particular care must be employed when stocking is considered. Furthermore, fish populations in areas outside of the introduced species management area might also be affected, usually negatively, if the introduced fish escapes. Therefore, rock-solid knowledge of basic aquatic ecology, including risk management; fish taxonomy (so the wrong fish species is not mistakenly stocked!); familiarity with human values of both the time and the place (which requires communication skills); and a strong understanding of human history are all important.

On the use of the singular value decomposition for text retrieval

DOE Office of Scientific and Technical Information (OSTI.GOV)

Husbands, P.; Simon, H.D.; Ding, C.

2000-12-04

The use of the Singular Value Decomposition (SVD) has been proposed for text retrieval in several recent works. This technique uses the SVD to project very high dimensional document and query vectors into a low dimensional space. In this new space it is hoped that the underlying structure of the collection is revealed thus enhancing retrieval performance. Theoretical results have provided some evidence for this claim and to some extent experiments have confirmed this. However, these studies have mostly used small test collections and simplified document models. In this work we investigate the use of the SVD on large documentmore » collections. We show that, if interpreted as a mechanism for representing the terms of the collection, this technique alone is insufficient for dealing with the variability in term occurrence. Section 2 introduces the text retrieval concepts necessary for our work. A short description of our experimental architecture is presented in Section 3. Section 4 describes how term occurrence variability affects the SVD and then shows how the decomposition influences retrieval performance. A possible way of improving SVD-based techniques is presented in Section 5 and concluded in Section 6.« less

Review of Manganese Processing for Production of TRIP/TWIP Steels, Part 1: Current Practice and Processing Fundamentals

NASA Astrophysics Data System (ADS)

Elliott, R.; Coley, K.; Mostaghel, S.; Barati, M.

2018-02-01

The increasing demand for high-performance steel alloys has led to development of transformation-induced plasticity (TRIP) and twinning-induced plasticity (TWIP) alloys over the past three decades. These alloys offer exceptional combinations of high tensile strength and ductility. Thus, the mechanical behavior of these alloys has been a subject of significant work in recent years. However, the challenge of economically providing Mn in the quantity and purity required by these alloys has received considerably less attention. To enable commercial implementation of ultrahigh-Mn alloys, it is desirable to lower the high material costs associated with their production. Therefore, the present work reviews Mn processing routes in the context of the chemical requirements of these alloys. The aim of this review is to assess the current state of the art regarding reduction of manganese ores and provide a comprehensive reference for researchers working to mitigate material processing costs associated with Mn production. The review is presented in two parts: Part 1 introduces TRIP and TWIP alloys, current industrial practice, and pertinent thermodynamic fundamentals; Part 2 addresses available literature regarding reduction of Mn ores and oxides, and seeks to identify opportunities for future process development.

Teaching Economics in the Mini-Economy.

ERIC Educational Resources Information Center

Indiana State Dept. of Education, Indianapolis.

This booklet produced by the State of Indiana introduces elementary teachers to economic concepts appropriate to the elementary curriculum and explains how to use mini-economy activities to teach these concepts. Chapter 1 describes how the mini-economy works, while chapter 2 introduces basic economic vocabulary and discusses market economy. Ideas…

Joint Sequence Analysis: Association and Clustering

ERIC Educational Resources Information Center

Piccarreta, Raffaella

2017-01-01

In its standard formulation, sequence analysis aims at finding typical patterns in a set of life courses represented as sequences. Recently, some proposals have been introduced to jointly analyze sequences defined on different domains (e.g., work career, partnership, and parental histories). We introduce measures to evaluate whether a set of…

Capillary Electrophoresis Analysis of Cations in Water Samples: An Experiment for the Introductory Laboratory

ERIC Educational Resources Information Center

Pursell, Christopher J.; Chandler, Bert; Bushey, Michelle M.

2004-01-01

Capillary electrophoresis is gradually working its way into the undergraduate laboratory curriculum. Typically, experiments utilizing this newer technology have been introduced into analytical or instrumental courses. The authors of this article have introduced an experiment into the introductory laboratory that utilizes capillary electrophoresis…

An On-line Microcomputer Course for Pre-service Teachers.

ERIC Educational Resources Information Center

Abkemeier, Mary K.

This paper describes "Microcomputer Applications for Educators," a course at Fontbonne College for pre-service teachers which introduces the educational applications of the computer and related technologies. The course introduces students to the Macintosh computer, its operating system, Claris Works 4.0, and various other educational and…

Working to Full Scope: The Reorganization of Nursing Work in Two Canadian Community Hospitals

PubMed Central

MacKinnon, Karen; Butcher, Diane L.; Bruce, Anne

2018-01-01

Work relationships between registered nurses (RNs) and practical nurses (LPNs) are changing as new models of nursing care delivery are introduced to create more flexibility for employers. In Canada, a team-based, hospital nursing care delivery model, known as Care Delivery Model Redesign (CDMR), redesigned a predominantly RN-based staffing model to a functional team consisting of fewer RNs and more LPNs. The scope of practice for LPNs was expanded, and unregulated health care assistants introduced. This study began from the standpoint of RNs and LPNs to understand their experiences working on redesigned teams by focusing on discourses activated in social settings. Guided by institutional ethnography, the conceptual and textual resources nurses are drawing on to understand these changing work relationships are explicated. We show how the institutional goals embedded in CDMR not only mediate how nurses work together, but how they subordinate holistic standards of nursing toward fragmented, task-oriented, divisions of care. PMID:29410976

Working to Full Scope: The Reorganization of Nursing Work in Two Canadian Community Hospitals.

PubMed

MacKinnon, Karen; Butcher, Diane L; Bruce, Anne

2018-01-01

Work relationships between registered nurses (RNs) and practical nurses (LPNs) are changing as new models of nursing care delivery are introduced to create more flexibility for employers. In Canada, a team-based, hospital nursing care delivery model, known as Care Delivery Model Redesign (CDMR), redesigned a predominantly RN-based staffing model to a functional team consisting of fewer RNs and more LPNs. The scope of practice for LPNs was expanded, and unregulated health care assistants introduced. This study began from the standpoint of RNs and LPNs to understand their experiences working on redesigned teams by focusing on discourses activated in social settings. Guided by institutional ethnography, the conceptual and textual resources nurses are drawing on to understand these changing work relationships are explicated. We show how the institutional goals embedded in CDMR not only mediate how nurses work together, but how they subordinate holistic standards of nursing toward fragmented, task-oriented, divisions of care.

AI (artificial intelligence) in histopathology--from image analysis to automated diagnosis.

PubMed

Kayser, Klaus; Görtler, Jürgen; Bogovac, Milica; Bogovac, Aleksandar; Goldmann, Torsten; Vollmer, Ekkehard; Kayser, Gian

2009-01-01

The technological progress in digitalization of complete histological glass slides has opened a new door in tissue--based diagnosis. The presentation of microscopic images as a whole in a digital matrix is called virtual slide. A virtual slide allows calculation and related presentation of image information that otherwise can only be seen by individual human performance. The digital world permits attachments of several (if not all) fields of view and the contemporary visualization on a screen. The presentation of all microscopic magnifications is possible if the basic pixel resolution is less than 0.25 microns. To introduce digital tissue--based diagnosis into the daily routine work of a surgical pathologist requires a new setup of workflow arrangement and procedures. The quality of digitized images is sufficient for diagnostic purposes; however, the time needed for viewing virtual slides exceeds that of viewing original glass slides by far. The reason lies in a slower and more difficult sampling procedure, which is the selection of information containing fields of view. By application of artificial intelligence, tissue--based diagnosis in routine work can be managed automatically in steps as follows: 1. The individual image quality has to be measured, and corrected, if necessary. 2. A diagnostic algorithm has to be applied. An algorithm has be developed, that includes both object based (object features, structures) and pixel based (texture) measures. 3. These measures serve for diagnosis classification and feedback to order additional information, for example in virtual immunohistochemical slides. 4. The measures can serve for automated image classification and detection of relevant image information by themselves without any labeling. 5. The pathologists' duty will not be released by such a system; to the contrary, it will manage and supervise the system, i.e., just working at a "higher level". Virtual slides are already in use for teaching and continuous education in anatomy and pathology. First attempts to introduce them into routine work have been reported. Application of AI has been established by automated immunohistochemical measurement systems (EAMUS, www.diagnomX.eu). The performance of automated diagnosis has been reported for a broad variety of organs at sensitivity and specificity levels >85%). The implementation of a complete connected AI supported system is in its childhood. Application of AI in digital tissue--based diagnosis will allow the pathologists to work as supervisors and no longer as primary "water carriers". Its accurate use will give them the time needed to concentrating on difficult cases for the benefit of their patients.

Assessment Matters: Some Issues Concerning the Supervision and Assessment of Work-Based Doctorates

ERIC Educational Resources Information Center

Johnson, David

2005-01-01

Since 2000, I have been working towards a professional doctorate at Middlesex University, and I am also working to introduce a work-based doctorate at Coventry University. This paper looks at the issues of supervision and assessment for work-based doctorates, which, I believe, are key to the design of such a programme and affect both the output…

Work outside the home is the primary barrier to exclusive breastfeeding in rural Viet Nam: insights from mothers who exclusively breastfed and worked.

PubMed

Dearden, Kirk A; Quan, Le Nga; Do, Mai; Marsh, David R; Pachón, Helena; Schroeder, Dirk G; Lang, Tran Thi

2002-12-01

This study assessed barriers to exclusive breastfeeding in rural Viet Nam and identified how a few mothers were able to exclusively breastfeed despite barriers. A cross-sectional quantitative and qualitative assessment was carried out among 120 mothers of infants less than six months old in northern Viet Nam. Only 24% of the mothers exclusively breastfed. Adjusting for infant's age and who attended delivery, the risk of not exclusively breastfeeding was 14.0 times greater for women who had returned to work than for women who had not. Exclusively breastfeeding mothers (n = 4) who worked differed from other mothers in important ways. They all felt they had enough milk, all knew the appropriate time to introduce foods and liquids, and most were supported in their breastfeeding decisions by commune health workers and family members. This research suggests strategies that can be implemented now to increase exclusive breastfeeding in rural work environments. These include improving knowledge about the introduction of water and semi-solids, addressing perceptions of milk insufficiency, securing support from others, and presenting mothers with options for exclusively breastfeeding, even when they work outside the home.

[Positive occupational health psychology: an introduction].

PubMed

Bakker, Arnold B; Rodríguez-Muñoz, Alfredo

2012-02-01

This article introduces the monographic section on Positive Occupational Health Psychology (POHP), presenting eight theoretical and empirical papers about diverse topics. Traditionally, research on occupational health has mainly been focused on causes of diseases and on identifying and preventing work factors related to worker's impaired health. However, this biased view may not provide a complete understanding of the mechanisms that lead to employee well-being and performance. We discuss the differences of POHP with similar constructs, and review reasons for its importance in the development of this field. Overall, the studies included in the monographic section show the usefulness of focusing on positive constructs, and present ideas and questions that we hope may help to further our progress in the field of POHP.

Safe and Secure Virtualization: Answers for IMA next Generation and Beyond

NASA Astrophysics Data System (ADS)

Almeida, Jose; Vatrinet, Francis

2010-08-01

This paper presents some of the challenges the aerospace industry is facing for the future and explains why and how a safe and secured virtualization technology can help solving these challenges Efforts around the next generation of IMA have already started, like the European FP7 funded project SCARLETT or the IDEE5 project and many avionics players and working groupware focused on how the new technologies like SMP capabilities introduced in latest CPU architectures, can help increasing system performances in future avionics system. We present PikeOS, a separation micro-kernel, which applies the state-of-the-art techniques and widely recognized standards such as ARINC 653 and MILS in order to guarantee safety and security properties, and still improve overall performance.

Geometrical approach to tumor growth.

PubMed

Escudero, Carlos

2006-08-01

Tumor growth has a number of features in common with a physical process known as molecular beam epitaxy. Both growth processes are characterized by the constraint of growth development to the body border, and surface diffusion of cells and particles at the growing edge. However, tumor growth implies an approximate spherical symmetry that makes necessary a geometrical treatment of the growth equations. The basic model was introduced in a former paper [C. Escudero, Phys. Rev. E 73, 020902(R) (2006)], and in the present work we extend our analysis and try to shed light on the possible geometrical principles that drive tumor growth. We present two-dimensional models that reproduce the experimental observations, and analyze the unexplored three-dimensional case, for which interesting conclusions on tumor growth are derived.

Probability density function learning by unsupervised neurons.

PubMed

Fiori, S

2001-10-01

In a recent work, we introduced the concept of pseudo-polynomial adaptive activation function neuron (FAN) and presented an unsupervised information-theoretic learning theory for such structure. The learning model is based on entropy optimization and provides a way of learning probability distributions from incomplete data. The aim of the present paper is to illustrate some theoretical features of the FAN neuron, to extend its learning theory to asymmetrical density function approximation, and to provide an analytical and numerical comparison with other known density function estimation methods, with special emphasis to the universal approximation ability. The paper also provides a survey of PDF learning from incomplete data, as well as results of several experiments performed on real-world problems and signals.

Introducing a primer for career development and promotion: succeeding as a psychologist in an academic health center.

PubMed

Christophersen, Edward; Butt, Zeeshan

2012-12-01

Noting a lack of such a resource, the authors developed a primer summarizing key concepts for career development and promotion for psychologists working in an academic health center. The present article presents a brief summary of the primer; however, the full version is available as an APAHC membership benefit (or for a small fee for non-members) by visiting http://www.div12.org/section8/index.html and is a supplement to the December issue of Volume 19 of the Journal of Clinical Psychology in Medical Settings (Supplementary material 1). The primer complements other APAHC membership benefits, which may be helpful for early career or more seasoned psychologists planning for career transitions.

A practical implementation of physics quality assurance for photon adaptive radiotherapy.

PubMed

Cai, Bin; Green, Olga L; Kashani, Rojano; Rodriguez, Vivian L; Mutic, Sasa; Yang, Deshan

2018-03-14

The fast evolution of technology in radiotherapy (RT) enabled the realization of adaptive radiotherapy (ART). However, the new characteristics of ART pose unique challenges for efficiencies and effectiveness of quality assurance (QA) strategies. In this paper, we discuss the necessary QAs for ART and introduce a practical implementation. A previously published work on failure modes and effects analysis (FMEA) of ART is introduced first to explain the risks associated with ART sub-processes. After a brief discussion of QA challenges, we review the existing QA strategies and tools that might be suitable for each ART step. By introducing the MR-guided online ART QA processes developed at our institute, we demonstrate a practical implementation. The limitations and future works to develop more robust and efficient QA strategies are discussed at the end. Copyright © 2018. Published by Elsevier GmbH.

Severe intermittent anxiety attacks. A diagnosis challenge in temporal lobe epilepsy.

PubMed

Alshomrani, Abdulaziz T; Zaidan, Radwan M; Abdulmalik, Yosef T; Alrahili, Nader M

2017-01-01

Psychiatric symptoms are frequently reported with epilepsy. Anxiety symptoms are the most common psychiatric expressions of temporal lobe epilepsy (TLE). Longer duration of the epileptic manifestation can be mistaken for psychiatric diseases, particularly when psychiatric symptoms are the only manifestations of the disorder. Here we introduce a case of a 27-year-old Saudi man presented to our clinic with a history of sudden and severe anxiety attacks over the prior 2 years, each lasting for 2-3 days. The attacks recurred monthly without clear triggers, and he recovered his normal clinical state between them. His condition worsened with antidepressants and improved with antiepileptic. Later follow ups and work ups supported the diagnosis of temporal lobe epilepsy. Diagnosis after such presentation may be challenging and we tried, in this case, to enhance awareness of such an unusual presentation.

Partial polarization: a comprehensive student exercise

NASA Astrophysics Data System (ADS)

Topasna, Gregory A.; Topasna, Daniela M.

2015-10-01

We present a comprehensive student exercise in partial polarization. Students are first introduced to the concept of partial polarization using Fresnel Equations. Next, MATHCAD is used to compute and graph the reflectance for dielectrics materials. The students then design and construct a simple, easy to use collimated light source for their experiment, which is performed on an optical breadboard using optical components typically found in an optics lab above the introductory level. The students obtain reflection data that is compared with their model by a nonlinear least square fit using EXCEL. Sources of error and uncertainty are discussed and students present a final written report. In this one exercise students learn how an experiment is constructed "from the ground up". They gain practical experience on data modeling and analysis, working with optical equipment, machining and construction, and preparing a final presentation.

Student Responses to the Women's Reclamation Work in the Philosophy of Education

ERIC Educational Resources Information Center

Wojcik, Teresa Genevieve; Titone, Connie

2013-01-01

Reclamation work denotes the process of uncovering the lost contributions of women to the philosophy of education, analyzing their works, making them accessible to a larger audience, and (re)introducing them to the historical record and canon. Since the 1970s, scholars have been engaged in the reclamation work, thus making available to students,…

Social Work Education and Police in Papua New Guinea

ERIC Educational Resources Information Center

Lovai, Betty

2007-01-01

The contribution of social work education to the professional capacity development of police officers commenced in 1974 when the Diploma in Police Studies was introduced at the University of Papua New Guinea under the Social Work Programme. In 2001, a study was conducted to assess the impact of social work education on police officers. The study…

Faculty Perspectives on the Inclusion of Work-Related Learning in Engineering Curricula

ERIC Educational Resources Information Center

Magnell, Marie; Geschwind, Lars; Kolmos, Anette

2017-01-01

The purpose of this paper is to identify faculty perspectives on the integration of work-related issues in engineering education. A mixed methods approach was used to explore faculty attitudes towards work-related learning, to describe activities related to working life that have been introduced into the curriculum and to identify factors that…

Apparatus for moving a pipe inspection probe through piping

DOEpatents

Zollinger, W.T.; Appel, D.K.; Lewis, G.W.

1995-07-18

A method and apparatus are disclosed for controllably moving devices for cleaning or inspection through piping systems, including piping systems with numerous piping bends therein, by using hydrostatic pressure of a working fluid introduced into the piping system. The apparatus comprises a reservoir or other source for supplying the working fluid to the piping system, a launch tube for admitting the device into the launcher and a reversible, positive displacement pump for controlling the direction and flow rate of the working fluid. The device introduced into the piping system moves with the flow of the working fluid through the piping system. The launcher attaches to the valved ends of a piping system so that fluids in the piping system can recirculate in a closed loop. The method comprises attaching the launcher to the piping system, supplying the launcher with working fluid, admitting the device into the launcher, pumping the working fluid in the direction and at the rate desired so that the device moves through the piping system for pipe cleaning or inspection, removing the device from the launcher, and collecting the working fluid contained in the launcher. 8 figs.

Apparatus for moving a pipe inspection probe through piping

DOEpatents

Zollinger, W. Thor; Appel, D. Keith; Lewis, Gregory W.

1995-01-01

A method and apparatus for controllably moving devices for cleaning or inspection through piping systems, including piping systems with numerous piping bends therein, by using hydrostatic pressure of a working fluid introduced into the piping system. The apparatus comprises a reservoir or other source for supplying the working fluid to the piping system, a launch tube for admitting the device into the launcher and a reversible, positive displacement pump for controlling the direction and flow rate of the working fluid. The device introduced into the piping system moves with the flow of the working fluid through the piping system. The launcher attaches to the valved ends of a piping system so that fluids in the piping system can recirculate in a closed loop. The method comprises attaching the launcher to the piping system, supplying the launcher with working fluid, admitting the device into the launcher, pumping the working fluid in the direction and at the rate desired so that the device moves through the piping system for pipe cleaning or inspection, removing the device from the launcher, and collecting the working fluid contained in the launcher.

Optimized active traffic management and speed harmonization in work zones.

DOT National Transportation Integrated Search

2014-01-01

Traffic and demand management are major strategies to control delay and congestion in : highway bottlenecks including work zones. The Federal Highway Administration (FHWA) : introduced innovative strategies, called Active Traffic and Demand Managemen...

Ray tracing for inhomogeneous media applied to the human eye

NASA Astrophysics Data System (ADS)

Diaz-Gonzalez, G.; Iturbe-Castillo, M. D.; Juarez-Salazar, R.

2017-08-01

Inhomogeneous or gradient index media exhibit a refractive index varying with the position. This kind of media are very interesting because they can be found in both synthetic as well as real life optical devices such as the human lens. In this work we present the development of a computational tool for ray tracing in refractive optical systems. Particularly, the human eye is used as the optical system under study. An inhomogeneous medium with similar characteristics to the human lens is introduced and modeled by the so-called slices method. The useful of our proposal is illustrated by several graphical results.

Cooperative combinatorial optimization: evolutionary computation case study.

PubMed

Burgin, Mark; Eberbach, Eugene

2008-01-01

This paper presents a formalization of the notion of cooperation and competition of multiple systems that work toward a common optimization goal of the population using evolutionary computation techniques. It is proved that evolutionary algorithms are more expressive than conventional recursive algorithms, such as Turing machines. Three classes of evolutionary computations are introduced and studied: bounded finite, unbounded finite, and infinite computations. Universal evolutionary algorithms are constructed. Such properties of evolutionary algorithms as completeness, optimality, and search decidability are examined. A natural extension of evolutionary Turing machine (ETM) model is proposed to properly reflect phenomena of cooperation and competition in the whole population.

Social network supported process recommender system.

PubMed

Ye, Yanming; Yin, Jianwei; Xu, Yueshen

2014-01-01

Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced.

Design and implementation of Ada programs to facilitate automated testing

NASA Technical Reports Server (NTRS)

Dean, Jack; Fox, Barry; Oropeza, Michael

1991-01-01

An automated method utilized to test the software components of COMPASS, an interactive computer aided scheduling system, is presented. Each package of this system introduces a private type, and works to construct instances of that type, along with read and write routines for that type. Generic procedures that can generate test drivers for these functions are given and show how the test drivers can read from a test data file the functions to call, the arguments for those functions, what the anticipated result should be, and whether an exception should be raised for the function given the arguments.

Bivariate sub-Gaussian model for stock index returns

NASA Astrophysics Data System (ADS)

Jabłońska-Sabuka, Matylda; Teuerle, Marek; Wyłomańska, Agnieszka

2017-11-01

Financial time series are commonly modeled with methods assuming data normality. However, the real distribution can be nontrivial, also not having an explicitly formulated probability density function. In this work we introduce novel parameter estimation and high-powered distribution testing methods which do not rely on closed form densities, but use the characteristic functions for comparison. The approach applied to a pair of stock index returns demonstrates that such a bivariate vector can be a sample coming from a bivariate sub-Gaussian distribution. The methods presented here can be applied to any nontrivially distributed financial data, among others.

Effect of proline kinks on the mechanical unfolding of α-helices

NASA Astrophysics Data System (ADS)

Arteca, Gustavo A.; Li, Zhiying

2004-12-01

Proteins unfold by applying an external force, although the microscopic mechanism is still not well understood. In this work, we use steered molecular dynamics to probe fundamental aspects of the stretching transition of α-helices, in particular how proline kinks and side chain dynamics would influence their ability to resist the applied force. We find that proline residues effectively 'cut' a helix in half when introduced on stable homopolymers, whereas their effect is smaller when present in helices that are more easily deformed. Our findings provide insight into the factors that may regulate the mechanical stretching of realistic protein domains.

Intelligent Energy Systems As a Modern Basis For Improving Energy Efficiency

NASA Astrophysics Data System (ADS)

Vidyaev, Igor G.; Ivashutenko, Alexandr S.; Samburskaya, Maria A.

2017-01-01

This work presents data on the share of energy costs in the cost structure for different countries. The information is provided on reducing the use of energy resources by means of introducing the intelligent control systems in the industrial enterprises. The structure and the use of such intelligent systems in the energy industry are under our consideration. It is shown that the constructing an intelligent system should be the strategic direction for the development of the distribution grid complex implying the four main areas for improvement: intellectualization of the equipment, management, communication and automation.

Alien To Me? Science in Search for Life Beyond Earth and Perceptions of Alien Life in Popular Culture

NASA Astrophysics Data System (ADS)

Capova, K. A.

2013-09-01

The paper will introduce an original piece of research that is devoted to the socio-cultural aspects of scientifi c search for life in outer space and it draws from doctoral research in anthropology of science. In this piece of research the extraterrestrial life hypothesis is conceptualized as a significant part of the general world-view, constantly shaped by the work and discoveries of science. The paper presents data from qualitative ethnographic fieldwork conducted in the UK as well as uses quantitative data from public from the USA, UK and other countries.

Construcción de un catálogo de cúmulos de galaxias en proceso de colisión

NASA Astrophysics Data System (ADS)

de los Ríos, M.; Domínguez, M. J.; Paz, D.

2015-08-01

In this work we present first results of the identification of colliding galaxy clusters in galaxy catalogs with redshift measurements (SDSS, 2DF), and introduce the methodology. We calibrated a method by studying the merger trees of clusters in a mock catalog based on a full-blown semi-analytic model of galaxy formation on top of the Millenium cosmological simulation. We also discuss future actions for studding our sample of colliding galaxy clusters, including x-ray observations and mass reconstruction obtained by using weak gravitational lenses.

Research on IPv6 intrusion detection system Snort-based

NASA Astrophysics Data System (ADS)

Shen, Zihao; Wang, Hui

2010-07-01

This paper introduces the common intrusion detection technologies, discusses the work flow of Snort intrusion detection system, and analyzes IPv6 data packet encapsulation and protocol decoding technology. We propose the expanding Snort architecture to support IPv6 intrusion detection in accordance with CIDF standard combined with protocol analysis technology and pattern matching technology, and present its composition. The research indicates that the expanding Snort system can effectively detect various intrusion attacks; it is high in detection efficiency and detection accuracy and reduces false alarm and omission report, which effectively solves the problem of IPv6 intrusion detection.

Intelligent Diagnosis of Degradation State under Corrosion

NASA Astrophysics Data System (ADS)

Isoc, Dorin; Ignat-Coman, Aurelian; Joldiş, Adrian

2008-06-01

The work presents an inter- and multi-disciplinary research where the diagnosis is treated by using the artificial intelligence means and the application the degradation state of buildings and urban power networks. A possible model of degradation process caused by the corrosion and the technical achievement manner is given. The notions of micro- and macro-modeling and model granularity are introduced and applied. For resulting model the specification of intelligent processing of information and further the knowledge for suggested model are prepared. As concluding remarks the results are analysed and interpreted and a generalized approach is suggested and argued.

Adolescent females "voice" changes can signal difficulties for teachers and administrators.

PubMed

Wren, D J

1997-01-01

This article describes the different preferences in learning styles of adolescent females and males, based on the pioneering work on adolescent values development by Lawrence Kohlberg and Carol Gilligan. Since values education programs are currently considered very important, educators need to explore the philosophical, psychological, and social influences on students' learning preferences before they can introduce appropriate curricula. An indication of problems in adolescent females frequently is the occurrence of voice changes, for example, girls may express viewpoints that do not represent their true beliefs and feelings. Curricular and co-curricular suggestions are presented.

Compact electromagnetic bandgap structures for notch band in ultra-wideband applications.

PubMed

Rotaru, Mihai; Sykulski, Jan

2010-01-01

This paper introduces a novel approach to create notch band filters in the front-end of ultra-wideband (UWB) communication systems based on electromagnetic bandgap (EBG) structures. The concept presented here can be implemented in any structure that has a microstrip in its configuration. The EBG structure is first analyzed using a full wave electromagnetic solver and then optimized to work at WLAN band (5.15-5.825 GHz). Two UWB passband filters are used to demonstrate the applicability and effectiveness of the novel EBG notch band feature. Simulation results are provided for two cases studied.

Compact Electromagnetic Bandgap Structures for Notch Band in Ultra-Wideband Applications

PubMed Central

Rotaru, Mihai; Sykulski, Jan

2010-01-01

This paper introduces a novel approach to create notch band filters in the front-end of ultra-wideband (UWB) communication systems based on electromagnetic bandgap (EBG) structures. The concept presented here can be implemented in any structure that has a microstrip in its configuration. The EBG structure is first analyzed using a full wave electromagnetic solver and then optimized to work at WLAN band (5.15–5.825 GHz). Two UWB passband filters are used to demonstrate the applicability and effectiveness of the novel EBG notch band feature. Simulation results are provided for two cases studied. PMID:22163430

Terahertz detection using double quantum well devices

NASA Astrophysics Data System (ADS)

Khodier, Majid; Christodoulou, Christos G.; Simmons, Jerry A.

2001-12-01

This paper discusses the principle of operation of an electrically tunable THz detector, working around 2.54 THz, integrated with a bowtie antenna. The detection is based on the idea of photon-assisted tunneling (PAT) in a double quantum well (DQW) device. The bowtie antenna is used to collect the THz radiation and feed it to the detector for processing. The Bowtie antenna geometry is integrated with the DQW device to achieve broadband characteristic, easy design, and compatibility with the detector fabrication process. The principle of operation of the detector is introduced first. Then, results of different bowtie antenna layouts are presented and discussed.

Introducing Heuristics of Cultural Dimensions into the Service-Level Technical Communication Classroom

ERIC Educational Resources Information Center

Schafer, Robert

2009-01-01

A significant problem for practitioners of technical communication is to gain the skills to compete in a global, multicultural work environment. Instructors of technical communication can provide future practitioners with the tools to compete and excel in this global environment by introducing heuristics of cultural dimensions into the…

Who Gains by Communications Development? Studies of Information Technolgies in Developing Countries. Working Paper 76-1.

ERIC Educational Resources Information Center

Clippinger, John H.

To identify the distribution of benefits that accrue from introducing communications technology in developing societies, two case studies were undertaken. The first case looks at telecommunications development in Algeria where telecommunications systems are being rapidly introduced to speed up industrialization and where a satellite system is in…

Rearview Mirror: Reflections on a Preschool Car Project.

ERIC Educational Resources Information Center

Beneke, Sallee

This book documents the work of a master preschool teacher, her co-teachers, student teachers, and very young children as they explored the automotive laboratory adjacent to their early childhood classroom at a community college. In addition to introducing the project approach, the master teacher also introduced the staff and students to…

Saxon Math. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2016

2016-01-01

"Saxon Math" is a core curriculum for students in grades K-12 that uses an incremental approach to instruction and assessment. This approach limits the amount of new math content delivered to students each day and allows time for daily practice. New concepts are introduced gradually and integrated with previously introduced content so…

"Make It New": Introducing Poetry Through Writing Poetry.

ERIC Educational Resources Information Center

Lim, Shirley

One approach to introducing students to poetry is to have them write and analyze their own poems. Although this approach has some disadvantages, it does serve to tap students' experiences and expressive potential with creative projects and to give them an immediate and direct relationship with the traditional published works. By writing poems…

Parallel Distributed Processing at 25: Further Explorations in the Microstructure of Cognition

ERIC Educational Resources Information Center

Rogers, Timothy T.; McClelland, James L.

2014-01-01

This paper introduces a special issue of "Cognitive Science" initiated on the 25th anniversary of the publication of "Parallel Distributed Processing" (PDP), a two-volume work that introduced the use of neural network models as vehicles for understanding cognition. The collection surveys the core commitments of the PDP…

Introducing Students to Bio-Inspiration and Biomimetic Design: A Workshop Experience

ERIC Educational Resources Information Center

Santulli, Carlo; Langella, Carla

2011-01-01

In recent years, bio-inspired approach to design has gained considerable interest between designers, engineers and end-users. However, there are difficulties in introducing bio-inspiration concepts in the university curriculum in that they involve multi-disciplinary work, which can only possibly be successfully delivered by a team with integrated…

A Non-Relativistic Look at the Compton Effect

ERIC Educational Resources Information Center

Feller, Steve; Giri, Sandeep; Zakrasek, Nicholas; Affatigato, Mario

2014-01-01

In a usual modern physics class the Compton effect is used as the pedagogical model for introducing relativity into quantum effects. The shift in photon wavelengths is usually introduced and derived using special relativity. Indeed, this works well for explaining the effect. However, in the senior author's class one of the student coauthors…

Introduce Construction Technology through Home Inspection

ERIC Educational Resources Information Center

Wiggins, Enrique R.

2007-01-01

Introducing technology education students to the field of home inspection gives them a great opportunity to learn about and apply construction technology content. In working with his 8th-grade students, the author covers the purpose of a home inspection, the dynamic of home inspections, the process involved in inspecting schools and homes and…

Introducing Ethics to Chemistry Students in a "Research Experiences for Undergraduates" (REU) Program

ERIC Educational Resources Information Center

Hanson, Mark J.

2015-01-01

A three-day ethics seminar introduced ethics to undergraduate environmental chemistry students in the Research Experiences for Undergraduates (REU) program. The seminar helped students become sensitive to and understand the ethical and values dimensions of their work as researchers. It utilized a variety of resources to supplement lectures and…

If Maxwell Had Worked between Ampere and Faraday: An Historical Fable with a Pedagogical Moral.

ERIC Educational Resources Information Center

Jammer, Max; Stachel, John

1980-01-01

Describes a new pedagogical approach to electromagnetic theory, in which the displacement current and the Galilean relativity principle are introduced before discussion of the Faraday induction term. Rationale for the alternate order of introducing these concepts and laws is explained, relative to their historical development. (CS)