Miscellaneous lunar tables from Babylon

NASA Astrophysics Data System (ADS)

Steele, J. M.

2006-03-01

In the process of searching through unpublished astronomical material in the cuneiform collection of the British Museum I have identified a number of new tabular astronomical texts of the kind published by O. Neugebauer in Astronomical Cuneiform Texts [1955] (hereafter:ACT). Several lunar tables were published in Steele [2002]. Here I publish another group of lunar ephemerides and related texts identified over the past five years, together with two tablets (BM 36961 and BM 37021) identified and described by A. Aaboe but never published, and two previously unpublished joins to ACT tablets (ACT No. 3a and ACT No. 4a) made by A. Sachs and A. Aaboe.

Attitudes toward text recycling in academic writing across disciplines.

PubMed

Hall, Susanne; Moskovitz, Cary; Pemberton, Michael A

2018-01-01

Text recycling, the reuse of material from one's own previously published writing in a new text without attribution, is a common academic writing practice that is not yet well understood. While some studies of text recycling in academic writing have been published, no previous study has focused on scholars' attitudes toward text recycling. This article presents results from a survey of over 300 journal editors and editorial board members from 86 top English-language journals in 16 different academic fields regarding text recycling in scholarly articles. Responses indicate that a large majority of academic gatekeepers believe text recycling is allowable in some circumstances; however, there is a lack of clear consensus about when text recycling is or is not appropriate. Opinions varied according to the source of the recycled material, its structural location and rhetorical purpose, and conditions of authorship conditions-as well as by the level of experience as a journal editor. Our study suggests the need for further research on text recycling utilizing focus groups and interviews.

Impact of molecule-based magnetic materials: A critical outlook

NASA Astrophysics Data System (ADS)

Rentschler, Eva; Affronte, Marco; Massobrio, Carlo; Rabu, Pierre; Veciana, Jaume

2009-05-01

A critical outlook of the field of molecular magnetic materials is presented. This article is inspired by an international symposium devoted to the " Design, Characterization and Modelling of Molecule-Based Magnetic Materials (DCM4-II)" that took place at Strasbourg (France), from May 28th to June 1st, within the E-MRS 2007 Spring Meeting (Symposium R) organized by the European Materials Research Society in collaboration with the European Science Foundation. A series of papers linked to this symposium are published in this issue and in the previous issue (Volume 11, Issue 4) of Solid State Sciences.

Comparison of graphite, aluminum, and TransHab shielding material characteristics in a high-energy neutron field

NASA Technical Reports Server (NTRS)

Badhwar, G. D.; Huff, H.; Wilkins, R.; Thibeault, Sheila

2002-01-01

Space radiation transport models clearly show that low atomic weight materials provide a better shielding protection for interplanetary human missions than high atomic weight materials. These model studies have concentrated on shielding properties against charged particles. A light-weight, inflatable habitat module called TransHab was built and shown to provide adequate protection against micrometeoroid impacts and good shielding properties against charged particle radiation in the International Space Station orbits. An experiment using a tissue equivalent proportional counter, to study the changes in dose and lineal energy spectra with graphite, aluminum, and a TransHab build-up as shielding, was carried out at the Los Alamos Nuclear Science Center neutron facility. It is a continuation of a previous study using regolith and doped polyethylene materials. This paper describes the results and their comparison with the previous study. Published by Elsevier Science Ltd.

10 CFR 1009.5 - Supersessions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Supersessions. 1009.5 Section 1009.5 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) GENERAL POLICY FOR PRICING AND CHARGING FOR MATERIALS AND SERVICES SOLD BY DOE § 1009.5 Supersessions. Prices which appear in Federal Register Notices previously published by...

Conservation Reasoning Ability and Performance on BSCS Blue Version Examinations.

ERIC Educational Resources Information Center

Lawson, Anton E.; Nordland, Floyd H.

Twenty-three high school biology students were individually administered three conservation tasks (weight, volume, volume displacement). During one semester, they were examined over the course material using published Biological Sciences Curriculum Study (BSCS) Blue Version examination questions which were previously classified as requiring either…

A test method for determining adhesion forces and Hamaker constants of cementitious materials using atomic force microscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lomboy, Gilson; Sundararajan, Sriram, E-mail: srirams@iastate.edu; Wang Kejin

2011-11-15

A method for determining Hamaker constant of cementitious materials is presented. The method involved sample preparation, measurement of adhesion force between the tested material and a silicon nitride probe using atomic force microscopy in dry air and in water, and calculating the Hamaker constant using appropriate contact mechanics models. The work of adhesion and Hamaker constant were computed from the pull-off forces using the Johnson-Kendall-Roberts and Derjagin-Muller-Toropov models. Reference materials with known Hamaker constants (mica, silica, calcite) and commercially available cementitious materials (Portland cement (PC), ground granulated blast furnace slag (GGBFS)) were studied. The Hamaker constants of the reference materialsmore » obtained are consistent with those published by previous researchers. The results indicate that PC has a higher Hamaker constant than GGBFS. The Hamaker constant of PC in water is close to the previously predicted value C{sub 3}S, which is attributed to short hydration time ({<=} 45 min) used in this study.« less

75 FR 65658 - Importer of Controlled Substances; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-26

... Raw Opium (9600) II Concentrate of Poppy Straw (9670) II The company plans to import narcotic raw... a manufacturer of several controlled substances that are manufactured from raw opium, poppy straw... narcotic raw material are not appropriate. As noted in a previous notice published in the Federal Register...

Simple technique to treat pupillary capture after transscleral fixation of intraocular lens.

PubMed

Jürgens, Ignasi; Rey, Amanda

2015-01-01

We describe a simple surgical technique to manage pupillary capture after previous transscleral fixation of an intraocular lens. Neither author has a financial or proprietary interest in any material or method mentioned. Copyright © 2015 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Ancient science in a digital age.

PubMed

Lehoux, Daryn

2013-03-01

Technology is rapidly changing our understanding of ancient science. New methods of visualization are bringing to light important texts we could not previously read; changes in online publishing are allowing unprecedented access to difficult-to-find materials; and online mapping tools are offering new pictures of lost spaces, connectivities, and physical objects.

Modelling of thermal stresses in bearing steel structure generated by electrical current impulses

NASA Astrophysics Data System (ADS)

Birjukovs, M.; Jakovics, A.; Holweger, W.

2018-05-01

This work is the study of one particular candidate for white etching crack (WEC) initiation mechanism in wind turbine gearbox bearings: discharge current impulses flowing through bearing steel with associated thermal stresses and material fatigue. Using data/results from previously published works, the authors develop a series of models that are utilized to simulate these processes under various conditions/local microstructure configurations, as well as to verify the results of the previous numerical studies. Presented models show that the resulting stresses are several orders of magnitude below the fatigue limit/yield strength for the parameters used herein. Results and analysis of models provided by Scepanskis, M. et al. also indicate that certain effects predicted in their previous work resulted from a physically unfounded assumption about material thermodynamic properties and numerical model implementation issues.

Transmission loss of double panels filled with porogranular materials.

PubMed

Chazot, Jean-Daniel; Guyader, Jean-Louis

2009-12-01

Sound transmission through hollow structures found its interest in several industrial domains such as building acoustics, automotive industry, and aeronautics. However, in practice, hollow structures are often filled with porous materials to improve acoustic properties without adding an excessive mass. Recently a lot of interest arises for granular materials of low density that can be an alternative to standard absorbing materials. This paper aims to predict vibro-acoustic behavior of double panels filled with porogranular materials by using the patch-mobility method recently published. Biot's theory is a basic tool for the description of porous material but is quite difficult to use in practice, mostly because of the solid phase characterization. The original simplified Biot's model (fluid-fluid model) for porogranular material permitting a considerable reduction in data necessary for calculation has been recently published. The aim of the present paper is to propose a model to predict sound transmission through a double panel filled with a porogranular material. The method is an extension of a previous paper to take into account the porogranular material through fluid-fluid Biot's model. After a global overview of the method, the case of a double panel filled with expanded polystyrene beads is studied and a comparison with measurements is realized.

Materials science on parabolic aircraft: The FY 1987-1989 KC-135 microgravity test program

NASA Technical Reports Server (NTRS)

Curreri, Peter A. (Editor)

1993-01-01

This document covers research results from the KC-135 Materials Science Program managed by MSFC for the period FY87 through FY89. It follows the previous NASA Technical Memorandum for FY84-86 published in August 1988. This volume contains over 30 reports grouped into eight subject areas covering acceleration levels, space flight hardware, transport and interfacial studies, thermodynamics, containerless processing, welding, melt/crucible interactions, and directional solidification. The KC-135 materials science experiments during FY87-89 accomplished direct science, preparation for space flight experiments, and justification for new experiments in orbit.

Proceedings of the symposium on the ecology, management, and utilization of California oaks, June 26-28

Treesearch

Timothy R. Plumb

1980-01-01

The symposium, held at Scripps College in Southern California, addressed most aspects of California's vast oak resource. Papers represented four major subject categories: ecological relationships, silviculture and management, damage factors, and products. Both scientific and applied information was presented, including original material not published previously....

Pennsylvania's Energy Curriculum for the Secondary Grades: Industrial Arts.

ERIC Educational Resources Information Center

Wighaman, Paul F.; Zimmerman, Earl R.

Compiled in this guide are 23 previously published documents for use by secondary school industrial arts teachers who want to incorporate energy studies into their curricula. Over half of the entries describe energy-related projects such as fireplaces, solar water heaters, and solar ovens. Other materials presented address the place of energy in…

Reply to "Further Issues in Determining the Readability of Self-Report Items: Comment on McHugh and Behar (2009)"

ERIC Educational Resources Information Center

McHugh, R. Kathryn; Behar, Evelyn

2012-01-01

In his commentary on our previously published article "Readability of Self-Report Measures of Depression and Anxiety," J. Schinka (2012) argued for the importance of considering readability of patient materials and highlighted limitations of existing methodologies for this assessment. Schinka's commentary articulately described the weaknesses of…

Gingival displacement: Survey results of dentists' practice procedures.

PubMed

Ahmed, Sumitha N; Donovan, Terry E

2015-07-01

A high percentage of fixed prosthodontic restorations require a subgingival margin placement, which requires the practice of gingival displacement or a deflection procedure to replicate the margins in impression. The purpose of this study was to learn the different gingival displacement techniques that are currently used by dentists in their practice and to compare the current concepts of gingival displacement with previously published articles. A survey of questions pertaining to gingival deflection methods was distributed as part of continuing education (CE) course material to dentists attending CE meetings in 7 states in the U.S. and 1 Canadian province. Question topics included initial patient assessment procedures, gingival displacement methods, dentist's knowledge and assessment of systemic manifestations, and brand names of materials used. Ninety-four percent of the participants were general practitioners with 24.11 ± 12.5 years of experience. Ninety-two percent used gingival displacement cords, while 20.2% used a soft tissue laser and 32% used electrosurgery as an adjunct. Sixty percent of the dentists used displacement cords impregnated with a medicament. Of the preimpregnated cords, 29% were impregnated with epinephrine, 13% with aluminum chloride, and 18% with aluminum potassium sulfate. The study showed a steady decrease compared with results of previously published articles in the use of epinephrine as a gingival deflection medicament. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Structural Development of the Oat Plant

NASA Technical Reports Server (NTRS)

Kaufman, Peter B.; Brock, Thomas G.

1992-01-01

The anatomical structure and morphology of the oat plant (Avena sativa L.) have been reviewed previously by Hector (1936), Bonnett (1961a,b) and Coffman (1977). In addition, Bonnett published detailed accounts of oat panicle development (1937, 1961a,b). This work has been summarized by Esau in her book, Anatomy of Seed Plants, in 1977. It is not the purpose of the present authors to simply go over all this same material again in a repetitive fashion, but rather, to emphasize some of the more recent and previously overlooked work on structural development of the oat plant, with emphasis on the major cultivated species, A. sativa (see Stanton, 1955; Coffman, 1977 for descriptions of this species). The material presented here should be of use to oat breeders, agronomists, and plant physiologists.

Recharacterization of Rhinophis dorsimaculatus Deraniyagala, 1941 (Serpentes: Uropeltidae), including description of new material.

PubMed

Gower, David J; Wickramasinghe, L J Mendis

2016-08-29

The Sri Lankan uropeltid (shieldtail) snake Rhinophis dorsimaculatus Deraniyagala, 1941 was described originally from two specimens that were subsequently lost. The small amount of previously published data and lack of published colour photographs made this one of South Asia's most poorly known snake species, and this resulted in at least one instance of taxonomic misidentification. An additional 10 specimens from a historical collection from the vicinity of the type locality recently came to light. This material is reviewed and documented and the species recharacterized. An additional locality for the species is reported. The newly reported material helps to corroborate the taxonomic validity and distinctiveness of Rhinophis dorsimaculatus. The species is readily distinguished from congeners by having 227 or more ventral scales; a large, dorsally carinate rostral shield; posterior margins of paired anals that are largely separated by the posteriormost ventral scale; and a distinctive colour pattern with bilaterally asymmetrical dark blotches within a broad, pale middorsal stripe and regularly punctate flanks.

Quantitative comparison of ligament formulation and pre-strain in finite element analysis of the human lumbar spine.

PubMed

Hortin, Mitchell S; Bowden, Anton E

2016-11-01

Data has been published that quantifies the nonlinear, anisotropic material behaviour and pre-strain behaviour of the anterior longitudinal, supraspinous (SSL), and interspinous ligaments of the human lumbar spine. Additionally, data has been published on localized material properties of the SSL. These results have been incrementally incorporated into a previously validated finite element model of the human lumbar spine. Results suggest that the effects of increased ligament model fidelity on bone strain energy were moderate and the effects on disc pressure were slight, and do not justify a change in modelling strategy for most clinical applications. There were significant effects on the ligament stresses of the ligaments that were directly modified, suggesting that these phenomena should be included in FE models where ligament stresses are the desired metric.

A Survey of Materials for the Study of the Uncommonly Taught Languages: Supplement, 1976-1981.

ERIC Educational Resources Information Center

Hatfield, Deborah H.; And Others

This annotated bibliography is a supplement to the previous survey published in 1976. It covers languages and language groups in the following divisions: (1) Western Europe/Pidgins and Creoles (European-based); (2) Eastern Europe and the Soviet Union; (3) the Middle East and North Africa; (4) South Asia; (5) Eastern Asia; (6) Sub-Saharan Africa;…

Effects of sediment supply on surface textures of gravel-bed rivers

Treesearch

John M. Buffington; David R. Montgomery

1999-01-01

Using previously published data from flume studies, we test a new approach for quantifying the effects of sediment supply (i.e., bed material supply) on surface grain size of equilibrium gravel channels. Textural response to sediment supply is evaluated relative to a theoretical prediction of competent median grain size (D’50). We find that surface median grain size (...

Range extensions of three crayfishes (Faxonius yanahlindus, F. placidus, and F. erichsonianus) into Mississippi

Treesearch

Susan B. Adams; Robert L. Jones

2018-01-01

We report 3 new state crayfish records from the Tennessee River drainage in Tishomingo County, Mississippi: 1 is a re-identification of previously published material, and 2 are from unpublished collections. Faxonius yanahlindus (Spinywrist Crayfish), recently described from the middle Tennessee River drainage in northwest Alabama and southern...

Erratum: Retraction Note to: Effect of Carbon Content on the Electrical Conductivity of Carbon Black-Filled PMC with Various Matrices

NASA Astrophysics Data System (ADS)

Shin, Soon-Gi

2018-03-01

The Editor-in-Chief and Editorial Board of Electronic Materials Letters have retracted this article [1] because its contents have been previously published by Miyasaka et al. [2]. The contents of this article are therefore redundant. Author Soon-Gi Shin has not responded to correspondence from the Editor about this retraction.

Bibliography of Aeronautics: 1928

NASA Technical Reports Server (NTRS)

Brockett, Paul

1928-01-01

This Bibliography of Aeronautics for 1928 covers the aeronautical literature published from January 1 to December 31, 1928. The first Bibliography of Aeronautics was published by the Smithsonian Institution as volume 55 of the Smithsonian Miscellaneous Collections and covered the material published prior to June 30, 1909. Supplementary volumes of the Bibliography of Aeronautics for the subsequent years have been published by the National Advisory Committee for Aeronautics. The last preceding volume was for the calendar year 1927. As in the previous volumes, citations of the publications of all nations are included in the languages in which these publications originally appeared. The arrangement is in dictionary form with author and subject entry, and one alphabetical arrangement. Detail in the matter of subject reference has been omitted on account of the cost of presentation, but an attempt has been made to give sufficient cross reference for research in special lines.

Bibliography of Aeronautics: 1926

NASA Technical Reports Server (NTRS)

Brockett, Paul

1928-01-01

This Bibliography of Aeronautics for 1926 covers the aeronautical literature published from January 1 to December 31, 1926. The first Bibliography of Aeronautics was published by the Smithsonian Institution as volume 55 of the Smithsonian Miscellaneous Collections and covered the material published prior to June 30, 1909. Supplementary volumes of the Bibliography of Aeronautics for the subsequent years have been published by the National Advisory Committee for Aeronautics. The last preceding volume was for the calendar year 1925. As in the previous volumes, citations of the publications of all nations are included in the languages in which these publications originally appeared. The arrangement is dictionary form with author find subject entry, and one alphabetical arrangement. Detail in the matter of subject reference has been omitted on aCC01.mt of the cost of presentation, but an attempt has been made to give sufficient cross reference for research in special lines.

Bibliography of Aeronautics, 1929

NASA Technical Reports Server (NTRS)

Brockett, Paul

1930-01-01

This Bibliography of Aeronautics for 1929 covers the aeronautical literature published from January 1 to December 31, 1929. The first Bibliography of Aeronautics was published by the Smithsonian Institution as Volume 55 of the Smithsonian Miscellaneous Collections and covered the material published prior to June 30, 1909. Supplementary volumes of the Bibliography of Aeronautics for the subsequent years have been published by the National Advisory Committee for Aeronautics. The last preceding volume was for the calendar year 1928. As in the previous volumes, citations of the pUblications of all nations are included in th.e languages in which. these publications originally appeared. The arrangement is in dictionary form with author and subject entry, and one alphabetical arrangement. Detail in the matter of subject reference has been omitted on account of the cost of presentation, but an attempt has been made to give sufficient cross reference for research in special lines.

Bibliography of Aeronautics: 1932

NASA Technical Reports Server (NTRS)

1935-01-01

This Bibliography of Aeronautics for 1932 covers the aeronautical literature published from January 1 to December 31, 1932. The first Bibliography of Aeronautics was published by the Smithsonian Institution as volume 55 of the Smithsonian Miscellaneous Collections and covered the material published prior to June 30, 1909. Supplementary volumes of the Bibliography of Aeronautics for the subsequent years have been published by the National Advisory Committee for Aeronautics. The last preceding volume was for the calendar year 1931. As in the previous volumes, citations of the publications of all nations are included in the languages in which these publications originally appeared. The arrangement is in dictionary form with author and subject entry and one alphabetical arrangement. Detail in the matter of subject reference has been omitted on account of the cost of presentation, but an attempt has been made to give sufficient cross-reference for research in special lines.

Pallet recovery, repair and remanufacturing in a changing industry: 1992 to 2006

Treesearch

Philip Araman; Les Groom

2010-01-01

In a previously published Pallet Enterprise article (Material Use and Production Changes in the U.S. Wood Pallet and Container Industry: 1992 to 2006, June 2009), we provided the results of a series of studies that investigated the use of new wood by the pallet and container industry. As we mentioned in the article, the use of new wood is only one of the changes in raw...

Using Silica Sol as a Nanoglue to Prepare Nanoscale Mesoporous Composite Gel and Aerogels

DTIC Science & Technology

2000-03-31

solution-phase reactants remain unaltered. Furthermore, the composite constitutes a rigid solid architecture, such that the silica aerogel structure...nm) was immobilized in a silica aerogel structure according to the method of the present invention. The optical properties of 9 these materials...Aerogel Preparation. Acid- and base-catalyzed silica aerogels were prepared by procedures similarto those previously published in Russo et al.J.Non

Design solutions for the solar cell interconnect fatigue fracture problem

NASA Technical Reports Server (NTRS)

Mon, G. R.; Ross, R. G., Jr.

1982-01-01

Mechanical fatigue of solar cell interconnects is a major failure mechanism in photovoltaic arrays. A comprehensive approach to the reliability design of interconnects, together with extensive design data for the fatigue properties of copper interconnects, has been published. This paper extends the previous work, developing failure prediction (fatigue) data for additional interconnect material choices, including aluminum and a variety of copper-Invar and copper-steel claddings. An improved global fatigue function is used to model the probability-of-failure statistics of each material as a function of level and number of cycles of applied strain. Life-cycle economic analyses are used to evaluate the relative merits of each material choce. The copper-Invar clad composites demonstrate superior performance over pure copper. Aluminum results are disappointing.

Expediting Combinatorial Data Set Analysis by Combining Human and Algorithmic Analysis.

PubMed

Stein, Helge Sören; Jiao, Sally; Ludwig, Alfred

2017-01-09

A challenge in combinatorial materials science remains the efficient analysis of X-ray diffraction (XRD) data and its correlation to functional properties. Rapid identification of phase-regions and proper assignment of corresponding crystal structures is necessary to keep pace with the improved methods for synthesizing and characterizing materials libraries. Therefore, a new modular software called htAx (high-throughput analysis of X-ray and functional properties data) is presented that couples human intelligence tasks used for "ground-truth" phase-region identification with subsequent unbiased verification by an algorithm to efficiently analyze which phases are present in a materials library. Identified phases and phase-regions may then be correlated to functional properties in an expedited manner. For the functionality of htAx to be proven, two previously published XRD benchmark data sets of the materials systems Al-Cr-Fe-O and Ni-Ti-Cu are analyzed by htAx. The analysis of ∼1000 XRD patterns takes less than 1 day with htAx. The proposed method reliably identifies phase-region boundaries and robustly identifies multiphase structures. The method also addresses the problem of identifying regions with previously unpublished crystal structures using a special daisy ternary plot.

Advances in 6d diffraction contrast tomography

NASA Astrophysics Data System (ADS)

Viganò, N.; Ludwig, W.

2018-04-01

The ability to measure 3D orientation fields and to determine grain boundary character plays a key role in understanding many material science processes, including: crack formation and propagation, grain coarsening, and corrosion processes. X-ray diffraction imaging techniques offer the ability to retrieve such information in a non-destructive manner. Among them, Diffraction Contrast Tomography (DCT) is a monochromatic beam, near-field technique, that uses an extended beam and offers fast mapping of 3D sample volumes. It was previously shown that the six-dimensional extension of DCT can be applied to moderately deformed samples (<= 5% total strain), made from materials that exhibit low levels of elastic deformation of the unit cell (<= 1%). In this article, we improved over the previously proposed 6D-DCT reconstruction method, through the introduction of both a more advanced forward model and reconstruction algorithm. The results obtained with the proposed improvements are compared against the reconstructions previously published in [1], using Electron Backscatter Diffraction (EBSD) measurements as a reference. The result was a noticeably higher quality reconstruction of the grain boundary positions and local orientation fields. The achieved reconstruction quality, together with the low acquisition times, render DCT a valuable tool for the stop-motion study of polycrystalline microstructures, evolving as a function of applied strain or thermal annealing treatments, for selected materials.

Classification of intrinsic variables. IX - The Cepheid domain

NASA Astrophysics Data System (ADS)

Eggen, O. J.

1983-03-01

Intermediate band, Hβ and RI observations have been obtained throughout the cycle of variation for 135 high mass, long-period and short-period cepheids (LPC and SPC). This material, together with the observations previously discussed for some 100 ultrashort periods cepheids (USPC), is used to delineate the cepheid domain in the (β,[C1]) and (MBol,log Te) planes. The independently derived luminosity calibrations for bright giants and supergiants previously published are found to closely reproduce the luminosities derived from the Sandage-Tammann PL relation for most variables. The theoretical "fundamental blue edge," computed by Iben and Tuggle with Y = 0.38, closely represents the blue edge of the cepheid domain.

Reformulating polycaprolactone fumarate to eliminate toxic diethylene glycol: effects of polymeric branching and autoclave sterilization on material properties.

PubMed

Runge, M Brett; Wang, Huan; Spinner, Robert J; Windebank, Anthony J; Yaszemski, Michael J

2012-01-01

Polycaprolactone fumarate (PCLF) is a cross-linkable derivative of polycaprolactone diol that has been shown to be an effective nerve conduit material that supports regeneration across segmental nerve defects and has warranted future clinical trials. Degradation of PCLF (PCLF(DEG)) releases toxic small molecules of diethylene glycol used as the initiator for the synthesis of polycaprolactone diol. In an effort to eliminate this toxic degradation product we present a strategy for the synthesis of PCLF from either propylene glycol (PCLF(PPD)) or glycerol (PCLF(GLY)). PCLF(PPD) is linear and resembles the previously studied PCLF(DEG), while PCLF(GLY) is branched and exhibits dramatically different material properties. The synthesis and characterization of their thermal, rheological, and mechanical properties are reported. The results show that the linear PCLF(PPD) has material properties similar to the previously studied PCLF(DEG). The branched PCLF(GLY) exhibits dramatically lower crystalline properties resulting in lower rheological and mechanical moduli, and is therefore a more compliant material. In addition, the question of an appropriate Food and Drug Administration approvable sterilization method is addressed. This study shows that autoclave sterilization of PCLF materials is an acceptable sterilization method for cross-linked PCLF and has minimal effect on the PCLF thermal and mechanical properties. Copyright © 2011 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Congenital malformations of human dermatoglyphs

PubMed Central

David, T. J.

1973-01-01

A classification for congenital malformations of dermatoglyphs is presented, dividing them into ridge aplasia, ridge hypoplasia, ridge dissociation, ridges-off-the-end, and a combination of the last two. The medical and genetic significance of these are considered in the light both of previous published cases and of new material. Malformations of dermatoglyphs are important as physical signs in paediatric diagnosis. ImagesFIG. 1FIG. 2FIG. 3FIG. 4FIG. 5FIG. 6FIG. 7 PMID:4693462

Citation of previous meta-analyses on the same topic: a clue to perpetuation of incorrect methods?

PubMed

Li, Tianjing; Dickersin, Kay

2013-06-01

Systematic reviews and meta-analyses serve as a basis for decision-making and clinical practice guidelines and should be carried out using appropriate methodology to avoid incorrect inferences. We describe the characteristics, statistical methods used for meta-analyses, and citation patterns of all 21 glaucoma systematic reviews we identified pertaining to the effectiveness of prostaglandin analog eye drops in treating primary open-angle glaucoma, published between December 2000 and February 2012. We abstracted data, assessed whether appropriate statistical methods were applied in meta-analyses, and examined citation patterns of included reviews. We identified two forms of problematic statistical analyses in 9 of the 21 systematic reviews examined. Except in 1 case, none of the 9 reviews that used incorrect statistical methods cited a previously published review that used appropriate methods. Reviews that used incorrect methods were cited 2.6 times more often than reviews that used appropriate statistical methods. We speculate that by emulating the statistical methodology of previous systematic reviews, systematic review authors may have perpetuated incorrect approaches to meta-analysis. The use of incorrect statistical methods, perhaps through emulating methods described in previous research, calls conclusions of systematic reviews into question and may lead to inappropriate patient care. We urge systematic review authors and journal editors to seek the advice of experienced statisticians before undertaking or accepting for publication a systematic review and meta-analysis. The author(s) have no proprietary or commercial interest in any materials discussed in this article. Copyright © 2013 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

Recent modifications of chitosan for adsorption applications: a critical and systematic review.

PubMed

Kyzas, George Z; Bikiaris, Dimitrios N

2015-01-09

Chitosan is considered to be one of the most promising and applicable materials in adsorption applications. The existence of amino and hydroxyl groups in its molecules contributes to many possible adsorption interactions between chitosan and pollutants (dyes, metals, ions, phenols, pharmaceuticals/drugs, pesticides, herbicides, etc.). These functional groups can help in establishing positions for modification. Based on the learning from previously published works in literature, researchers have achieved a modification of chitosan with a number of different functional groups. This work summarizes the published works of the last three years (2012-2014) regarding the modification reactions of chitosans (grafting, cross-linking, etc.) and their application to adsorption of different environmental pollutants (in liquid-phase).

LIGA-based microsystem manufacturing:the electrochemistry of through-mold depostion and material properties.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, James J.; Goods, Steven Howard

2005-06-01

The report presented below is to appear in ''Electrochemistry at the Nanoscale'', Patrik Schmuki, Ed. Springer-Verlag, (ca. 2005). The history of the LIGA process, used for fabricating dimensional precise structures for microsystem applications, is briefly reviewed, as are the basic elements of the technology. The principal focus however, is on the unique aspects of the electrochemistry of LIGA through-mask metal deposition and the generation of the fine and uniform microstructures necessary to ensure proper functionality of LIGA components. We draw from both previously published work by external researchers in the field as well as from published and unpublished studies frommore » within Sandia.« less

Self-Publishing Indigenous Language Materials.

ERIC Educational Resources Information Center

St. Clair, Robert N.; Busch, John; Webb, B. Joanne

Indigenous language programs that have a literacy component require reading materials. Recent advances in computer technology and certain legal changes in the publishing industry have made self-publishing such materials an easier task. This paper describes some of the steps necessary to self-publish indigenous language materials. Suggestions are…

Prediction of drug-packaging interactions via molecular dynamics (MD) simulations.

PubMed

Feenstra, Peter; Brunsteiner, Michael; Khinast, Johannes

2012-07-15

The interaction between packaging materials and drug products is an important issue for the pharmaceutical industry, since during manufacturing, processing and storage a drug product is continuously exposed to various packaging materials. The experimental investigation of a great variety of different packaging material-drug product combinations in terms of efficacy and safety can be a costly and time-consuming task. In our work we used molecular dynamics (MD) simulations in order to evaluate the applicability of such methods to pre-screening of the packaging material-solute compatibility. The solvation free energy and the free energy of adsorption of diverse solute/solvent/solid systems were estimated. The results of our simulations agree with experimental values previously published in the literature, which indicates that the methods in question can be used to semi-quantitatively reproduce the solid-liquid interactions of the investigated systems. Copyright © 2012 Elsevier B.V. All rights reserved.

The impact of preclinical irreproducibility on drug development.

PubMed

Freedman, L P; Gibson, M C

2015-01-01

The development of novel therapeutics depends and builds upon the validity and reproducibility of previously published data and findings. Yet irreproducibility is pervasive in preclinical life science research and can be traced to cumulative errors or flaws in several areas, including reference materials, study design, laboratory protocols, and data collection and analysis. The expanded development and use of consensus-based standards and well-documented best practices is needed to both enhance reproducibility and drive therapeutic innovations. © 2014 ASCPT.

46 CFR 503.11 - Materials to be published.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 9 2010-10-01 2010-10-01 false Materials to be published. 503.11 Section 503.11... in the Federal Register § 503.11 Materials to be published. The Commission shall separately state and concurrently publish the following materials in the Federal Register for the guidance of the public: (a...

Hymenolepididae (Cestoda, Cyclophyllidea) of ciconiiform and pelecaniform birds: the genera Oschmarinolepis Spassky and Spasskaja, 1954 and Paraoschmarinolepis gen. n.

PubMed

Greben, Oksana; Kornyushin, Vadim; Mariaux, Jean

2017-09-26

The monotypic genus Oschmarinolepis Spassky and Spasskaja, 1954 (Cestoda, Hymenolepididae) is reviewed. Its validity is confirmed with an updated diagnosis, and its type-species, Oschmarinolepis microcephala (Rudolphi, 1819), is redescribed. The new monotypic genus Paraoschmarinolepis gen n. is erected with Paraoschmarinolepis multiformis (Creplin, 1829) comb. n., as its type-species. The morphology of both type-species, O. microcephala and P. multiformis comb. n. is reviewed on the basis of published data and examination of collection material from Plegadis falcinellus from Ukraine and Ciconia ciconia from Slovakia. We show that some material previously assigned to O. microcephala, belong in fact P. multiformis comb. n.

22 CFR 212.11 - Materials to be published.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Materials to be published. 212.11 Section 212... Federal Register § 212.11 Materials to be published. (a) USAID separately states and currently publishes... section. (b) USAID Public Notice No. 1 and the USAID Regulations published in chapter II of Title 22 and...

Hydrodynamic and Chemical Factors in Clogging by Montmorillonite in Porous Media

PubMed Central

Mays, David C.; Hunt, James R.

2008-01-01

Clogging by colloid deposits is important in water treatment filters, groundwater aquifers, and petroleum reservoirs. The complexity of colloid deposition and deposit morphology preclude models based on first principles, so this study extends an empirical approach to quantify clogging using a simple, one-parameter model. Experiments were conducted with destabilized suspensions of sodium- and calcium-montmorillonite to quantify the hydrodynamic and chemical factors important in clogging. Greater clogging is observed at slower fluid velocity, consistent with previous investigations. However, calcium-montmorillonite causes one order of magnitude less clogging per mass of deposited particles compared to sodium-montmorillonite or a previously published summary of clogging in model granular media. Steady state conditions, in which the permeability and the quantity of deposited material are both constant, were not observed, even though the experimental conditions were optimized for that purpose. These results indicate that hydrodynamic aspects of clogging by these natural materials are consistent with those of simplified model systems, and they demonstrate significant chemical effects on clogging for fully destabilized montmorillonite clay. PMID:17874771

Hydrodynamic and chemical factors in clogging by montmorillonite in porous media.

PubMed

Mays, David C; Hunt, James R

2007-08-15

Clogging by colloid deposits is important in water treatment filters, groundwater aquifers, and petroleum reservoirs. The complexity of colloid deposition and deposit morphology preclude models based on first principles, so this study extends an empirical approach to quantify clogging using a simple, one-parameter model. Experiments were conducted with destabilized suspensions of sodium- and calcium-montmorillonite to quantify the hydrodynamic and chemical factors important in clogging. Greater clogging is observed at slower fluid velocity, consistent with previous investigations. However, calcium-montmorillonite causes 1 order of magnitude less clogging per mass of deposited particles compared to sodium-montmorillonite or a previously published summary of clogging in model granular media. Steady-state conditions, in which the permeability and the quantity of deposited material are both constant, were not observed, even though the experimental conditions were optimized for that purpose. These results indicate that hydrodynamic aspects of clogging by these natural materials are consistent with those of simplified model systems, and they demonstrate significant chemical effects on clogging for fully destabilized montmorillonite clay.

Toolkit for US colleges/schools of pharmacy to prepare learners for careers in academia.

PubMed

Haines, Seena L; Summa, Maria A; Peeters, Michael J; Dy-Boarman, Eliza A; Boyle, Jaclyn A; Clifford, Kalin M; Willson, Megan N

2017-09-01

The objective of this article is to provide an academic toolkit for use by colleges/schools of pharmacy to prepare student pharmacists/residents for academic careers. Through the American Association of Colleges of Pharmac (AACP) Section of Pharmacy Practice, the Student Resident Engagement Task Force (SRETF) collated teaching materials used by colleges/schools of pharmacy from a previously reported national survey. The SRETF developed a toolkit for student pharmacists/residents interested in academic pharmacy. Eighteen institutions provided materials; five provided materials describing didactic coursework; over fifteen provided materials for an academia-focused Advanced Pharmacy Practice Experiences (APPE), while one provided materials for an APPE teaching-research elective. SRETF members created a syllabus template and sample lesson plan by integrating submitted resources. Submissions still needed to complete the toolkit include examples of curricular tracks and certificate programs. Pharmacy faculty vacancies still exist in pharmacy education. Engaging student pharmacists/residents about academia pillars of teaching, scholarship and service is critical for the future success of the academy. Published by Elsevier Inc.

Measurement of material nonlinearity using surface acoustic wave parametric interaction and laser ultrasonics.

PubMed

Stratoudaki, Theodosia; Ellwood, Robert; Sharples, Steve; Clark, Matthew; Somekh, Michael G; Collison, Ian J

2011-04-01

A dual frequency mixing technique has been developed for measuring velocity changes caused by material nonlinearity. The technique is based on the parametric interaction between two surface acoustic waves (SAWs): The low frequency pump SAW generated by a transducer and the high frequency probe SAW generated and detected using laser ultrasonics. The pump SAW stresses the material under the probe SAW. The stress (typically <5 MPa) is controlled by varying the timing between the pump and probe waves. The nonlinear interaction is measured as a phase modulation of the probe SAW and equated to a velocity change. The velocity-stress relationship is used as a measure of material nonlinearity. Experiments were conducted to observe the pump-probe interaction by changing the pump frequency and compare the nonlinear response of aluminum and fused silica. Experiments showed these two materials had opposite nonlinear responses, consistent with previously published data. The technique could be applied to life-time predictions of engineered components by measuring changes in nonlinear response caused by fatigue.

45 CFR 502.2 - Material to be published in the Federal Register pursuant to the Freedom of Information Act.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 3 2010-10-01 2010-10-01 false Material to be published in the Federal Register... JUSTICE RULES OF PRACTICE PUBLIC INFORMATION-FREEDOM OF INFORMATION ACT § 502.2 Material to be published... state and concurrently publish the following materials in the Federal Register for the guidance of the...

Recent Modifications of Chitosan for Adsorption Applications: A Critical and Systematic Review

PubMed Central

Kyzas, George Z.; Bikiaris, Dimitrios N.

2015-01-01

Chitosan is considered to be one of the most promising and applicable materials in adsorption applications. The existence of amino and hydroxyl groups in its molecules contributes to many possible adsorption interactions between chitosan and pollutants (dyes, metals, ions, phenols, pharmaceuticals/drugs, pesticides, herbicides, etc.). These functional groups can help in establishing positions for modification. Based on the learning from previously published works in literature, researchers have achieved a modification of chitosan with a number of different functional groups. This work summarizes the published works of the last three years (2012–2014) regarding the modification reactions of chitosans (grafting, cross-linking, etc.) and their application to adsorption of different environmental pollutants (in liquid-phase). PMID:25584681

7 CFR 370.2 - Published materials.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Published materials. 370.2 Section 370.2 Agriculture..., DEPARTMENT OF AGRICULTURE FREEDOM OF INFORMATION § 370.2 Published materials. Rules and regulations of APHIS relating to its regulatory responsibilities are continuously published in the Federal Register, and...

What is the Process Approvals for Survey Research in the Department of Defense (DoD)

DTIC Science & Technology

2017-04-26

MDW/SGVU SUBJECT: Professional Presentation Approval 11APR 2017 1. Your paper, entitled What is the Process? Approvals for Survey Research in the...approval.) NA 6. TITLE OF MATERIAL TO BE PUBLISHED OR PRESENTED: What is the Process? Approvals for Survey Research in the Department of Defense (DoD...PREVIOUS EDITIONS ARE OBSOLETE 50. DATE I Page 3 of 3 Pages W_hat is the process? Approval of Survey Research in the Department of Defense (DoD

Organization and Management of Construction in Developing Countries,

DTIC Science & Technology

1982-02-01

ing a paper on any or on all of the issues of the Terms of Reference or on any other issues that they might prefer. The responses by letter were...consider- able, but the papers received were not many. Some experts though had promised to send a paper at a later time. To facilitate responses a...Since this material was not very much, research was facilitated by other published papers and reports, such as papers presented at the previous CIB W-65

9 CFR 390.2 - Published materials.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Published materials. 390.2 Section 390... § 390.2 Published materials. FSIS rules and regulations relating to its regulatory responsibilities and administrative procedures are published and made available to the public in the Federal Register and codified in...

Compact determination of hydrogen isotopes

DOE PAGES

Robinson, David

2017-04-06

Scanning calorimetry of a confined, reversible hydrogen sorbent material has been previously proposed as a method to determine compositions of unknown mixtures of diatomic hydrogen isotopologues and helium. Application of this concept could result in greater process knowledge during the handling of these gases. Previously published studies have focused on mixtures that do not include tritium. This paper focuses on modeling to predict the effect of tritium in mixtures of the isotopologues on a calorimetry scan. Furthermore, the model predicts that tritium can be measured with a sensitivity comparable to that observed for hydrogen-deuterium mixtures, and that under so memore » conditions, it may be possible to determine the atomic fractions of all three isotopes in a gas mixture.« less

40 CFR 1612.3 - Published reports and material contained in the public incident investigation dockets.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Published reports and material... Published reports and material contained in the public incident investigation dockets. (a) Demands for published investigation reports should be directed to the Office of Congressional and Public Affairs, U.S...

41 CFR 105-60.202 - Published materials available for sale to the public.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Published materials... Published materials available for sale to the public. (a) Substantive rules of general applicability adopted by GSA as authorized by law that this agency publishes in the Federal Register and which are...

Evaluation of the biocompatibility of a coating material for an implantable bladder volume sensor.

PubMed

Kim, Su-Jin; Lee, Dong-Sup; Kim, In-Gul; Sohn, Dong-Wan; Park, Jung-Yul; Choi, Bum-Kyoo; Kim, Sae-Woong

2012-03-01

As the applications for implantable medical devices have increased, the need for biocompatible packaging materials has become important. Recently, we reported an implantable sensor for real-time monitoring of the changes in bladder volume, which necessitated finding a safe coating material for use in bladder tissue. At present, materials like polyethylene glycol (PEG), polydimethylsiloxane (PDMS) and parylene-C are used in biomedical devices or as coating materials, owing to their excellent safety in various medical fields. However, few studies have assessed their safety in bladder tissue, therefore, we evaluated the biocompatibility of PEG, PDMS and parylene-C in the bladder. All three materials turned out to be safe in in vitro tests of live/dead staining and cell viability. In vivo tests with hematoxylin and eosin and immunofluorescence staining with MAC387 showed no persistent inflammation. Therefore, we consider that the three materials are biocompatible in bladder tissue. Despite this safety, however, PEG has biodegradable characteristics and thus is not suitable for use as packaging. We suggest that PDMS and parylene-C can be used as safe coating materials for the implantable bladder volume sensor reported previously. Copyright © 2012. Published by Elsevier B.V.

Metallic behavior in the graphene analogue Ni 3(HITP) 2 and a strategy to render the material a semiconductor.

DOE PAGES

Foster, Michael E.; Sohlberg, Karl; Spataru, Dan Catalin; ...

2016-06-19

The metal organic framework material Ni 3(2,3,6,7,10,11 - hexaiminotriphenylene) 2, (Ni 3(HITP) 2) is composed of layers of extended conjugated planes analogous to graphene. We carried out Density functional theory (DFT) calculations to model the electronic structure of bulk and monolayer Ni 3(HITP) 2. The layered 3D material is metallic, similar to graphene. Our calculations predict that there is appreciable band dispersion not only in-plane, but perpendicular to the stacking planes as well, suggesting that, unlike graphene, the conductivity may be nearly isotropic. In contrast, a 2D monolayer of the material exhibits a band gap, consistent with previously published results.more » Insight obtained from studies of the evolution of the material from semiconducting to metallic as the material is transitioned from 2D to 3D suggests the possibility of modifying the material to render it semiconducting by changing the metal center and inserting spacer moieties between the layers. Furthermore, the DFT calculations predict that the modified material will be structurally stable and exhibit a band gap.« less

Finite difference time domain calculation of transients in antennas with nonlinear loads

NASA Technical Reports Server (NTRS)

Luebbers, Raymond J.; Beggs, John H.; Kunz, Karl S.; Chamberlin, Kent

1991-01-01

In this paper transient fields for antennas with more general geometries are calculated directly using Finite Difference Time Domain methods. In each FDTD cell which contains a nonlinear load, a nonlinear equation is solved at each time step. As a test case the transient current in a long dipole antenna with a nonlinear load excited by a pulsed plane wave is computed using this approach. The results agree well with both calculated and measured results previously published. The approach given here extends the applicability of the FDTD method to problems involving scattering from targets including nonlinear loads and materials, and to coupling between antennas containing nonlinear loads. It may also be extended to propagation through nonlinear materials.

Evaluating predictors of lead exposure for activities disturbing materials painted with or containing lead using historic published data from U.S. workplaces.

PubMed

Locke, Sarah J; Deziel, Nicole C; Koh, Dong-Hee; Graubard, Barry I; Purdue, Mark P; Friesen, Melissa C

2017-02-01

We evaluated predictors of differences in published occupational lead concentrations for activities disturbing material painted with or containing lead in U.S. workplaces to aid historical exposure reconstruction. For the aforementioned tasks, 221 air and 113 blood lead summary results (1960-2010) were extracted from a previously developed database. Differences in the natural log-transformed geometric mean (GM) for year, industry, job, and other ancillary variables were evaluated in meta-regression models that weighted each summary result by its inverse variance and sample size. Air and blood lead GMs declined 5%/year and 6%/year, respectively, in most industries. Exposure contrast in the GMs across the nine jobs and five industries was higher based on air versus blood concentrations. For welding activities, blood lead GMs were 1.7 times higher in worst-case versus non-worst case scenarios. Job, industry, and time-specific exposure differences were identified; other determinants were too sparse or collinear to characterize. Am. J. Ind. Med. 60:189-197, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Readability Trends of Online Information by the American Academy of Otolaryngology-Head and Neck Surgery Foundation.

PubMed

Wong, Kevin; Levi, Jessica R

2017-01-01

Objective Previous studies have shown that patient education materials published by the American Academy of Otolaryngology-Head and Neck Surgery Foundation may be too difficult for the average reader to understand. The purpose of this study was to determine if current educational materials show improvements in readability. Study Design Cross-sectional analysis. Setting The Patient Health Information section of the American Academy of Otolaryngology-Head and Neck Surgery Foundation website. Subjects and Methods All patient education articles were extracted in plain text. Webpage navigation, references, author information, appointment information, acknowledgments, and disclaimers were removed. Follow-up editing was also performed to remove paragraph breaks, colons, semicolons, numbers, percentages, and bullets. Readability grade was calculated with the Flesch-Kincaid Grade Level, Flesch Reading Ease, Gunning-Fog Index, Coleman-Liau Index, Automated Readability Index, and Simple Measure of Gobbledygook. Intra- and interobserver reliability were assessed. Results A total of 126 articles from 7 topics were analyzed. Readability levels across all 6 tools showed that the difficulty of patient education materials exceeded the abilities of an average American. As compared with previous studies, current educational materials by the American Academy of Otolaryngology-Head and Neck Surgery Foundation have shown a decrease in difficulty. Intra- and interobserver reliability were both excellent, with intraclass coefficients of 0.99 and 0.96, respectively. Conclusion Improvements in readability is an encouraging finding and one that is consistent with recent trends toward improved health literacy. Nevertheless, online patient educational material is still too difficult for the average reader. Revisions may be necessary for current materials to benefit a larger readership.

Determinants of compulsive buying behavior among young adults: The mediating role of materialism.

PubMed

Islam, Tahir; Wei, Jiuchang; Sheikh, Zaryab; Hameed, Zahid; Azam, Rauf I

2017-12-01

This research seeks to determine what makes young adults materialistic. The study examines the mediating role of materialism between the contextual factors and compulsive buying. Data was gathered from 219 Pakistani undergraduate university students. Partial Least Square (PLS) technique was used to analyze the data. The study confirms the intuition that more materialistic young adults are more likely to be involved in compulsive buying than are less materialistic young adults. The results were similar with the previous literature conducted in the western culture, indicating that also applies in a modern Islamic society. The findings of the study reveal that materialism mediated the relationship between certain sociological factors (i.e., group, media Celebrity endorsement, and TV advertisement) and compulsive buying. The study highlights the importance of understanding young adults' materialistic attitudes and consumption decisions and provides key knowledge for researchers, policymakers, and managers of leading brands. Copyright © 2017. Published by Elsevier Ltd.

Isotope-abundance variations and atomic weights of selected elements: 2016 (IUPAC Technical Report)

USGS Publications Warehouse

Coplen, Tyler B.; Shrestha, Yesha

2016-01-01

There are 63 chemical elements that have two or more isotopes that are used to determine their standard atomic weights. The isotopic abundances and atomic weights of these elements can vary in normal materials due to physical and chemical fractionation processes (not due to radioactive decay). These variations are well known for 12 elements (hydrogen, lithium, boron, carbon, nitrogen, oxygen, magnesium, silicon, sulfur, chlorine, bromine, and thallium), and the standard atomic weight of each of these elements is given by IUPAC as an interval with lower and upper bounds. Graphical plots of selected materials and compounds of each of these elements have been published previously. Herein and at the URL http://dx.doi.org/10.5066/F7GF0RN2, we provide isotopic abundances, isotope-delta values, and atomic weights for each of the upper and lower bounds of these materials and compounds.

Developing Textbook Materials in Uncommon Languages.

ERIC Educational Resources Information Center

Lathrop, Thomas A.

Guidelines are offered for preparing and publishing textbook materials in Portuguese and other uncommonly taught languages. The available options for publishing Portuguese materials include two textbook publishers, three university presses, self-publication, and the Cabrilho Press, which produces language textbooks. Methods for submitting…

Rapid Radiochemical Methods for Asphalt Paving Material ...

EPA Pesticide Factsheets

Technical Brief Validated rapid radiochemical methods for alpha and beta emitters in solid matrices that are commonly encountered in urban environments were previously unavailable for public use by responding laboratories. A lack of tested rapid methods would delay the quick determination of contamination levels and the assessment of acceptable site-specific exposure levels. Of special concern are matrices with rough and porous surfaces, which allow the movement of radioactive material deep into the building material making it difficult to detect. This research focuses on methods that address preparation, radiochemical separation, and analysis of asphalt paving materials and asphalt roofing shingles. These matrices, common to outdoor environments, challenge the capability and capacity of very experienced radiochemistry laboratories. Generally, routine sample preparation and dissolution techniques produce liquid samples (representative of the original sample material) that can be processed using available radiochemical methods. The asphalt materials are especially difficult because they do not readily lend themselves to these routine sample preparation and dissolution techniques. The HSRP and ORIA coordinate radiological reference laboratory priorities and activities in conjunction with HSRP’s Partner Process. As part of the collaboration, the HSRP worked with ORIA to publish rapid radioanalytical methods for selected radionuclides in building material matrice

7 CFR 370.2 - Published materials.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 5 2011-01-01 2011-01-01 false Published materials. 370.2 Section 370.2 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FREEDOM OF INFORMATION § 370.2 Published materials. Rules and regulations of APHIS...

7 CFR 370.2 - Published materials.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 5 2014-01-01 2014-01-01 false Published materials. 370.2 Section 370.2 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FREEDOM OF INFORMATION § 370.2 Published materials. Rules and regulations of APHIS...

Developing Collections of Web-Published Materials

ERIC Educational Resources Information Center

Hsieh, Inga K.; Murray, Kathleen R.; Hartman, Cathy Nelson

2007-01-01

Librarians and archivists face challenges when adapting traditional collection development practices to meet the unique characteristics of Web-published materials. Likewise, preservation activities for Web-published materials must be undertaken at the outset of collection development lest they be lost forever. Standards and best practices for…

Cosmological Implications of the Effects of X-Ray Clusters on the Cosmic Microwave Background

NASA Technical Reports Server (NTRS)

Forman, William R.

1996-01-01

We have been carrying forward a program to confront X-ray observations of clusters and their evolution as derived from X-ray observatories with observations of the cosmic microwave background radiation (CMBR). In addition to the material covered in our previous reports (including three published papers), most recently we have explored the effects of a cosmological constant on the predicted Sunyaev-Zel'dovich effect from the ensemble of clusters. In this report we summarize that work from which a paper will be prepared.

CFL3D Version 6.4-General Usage and Aeroelastic Analysis

NASA Technical Reports Server (NTRS)

Bartels, Robert E.; Rumsey, Christopher L.; Biedron, Robert T.

2006-01-01

This document contains the course notes on the computational fluid dynamics code CFL3D version 6.4. It is intended to provide from basic to advanced users the information necessary to successfully use the code for a broad range of cases. Much of the course covers capability that has been a part of previous versions of the code, with material compiled from a CFL3D v5.0 manual and from the CFL3D v6 web site prior to the current release. This part of the material is presented to users of the code not familiar with computational fluid dynamics. There is new capability in CFL3D version 6.4 presented here that has not previously been published. There are also outdated features no longer used or recommended in recent releases of the code. The information offered here supersedes earlier manuals and updates outdated usage. Where current usage supersedes older versions, notation of that is made. These course notes also provides hints for usage, code installation and examples not found elsewhere.

Historic Tsunami in the Indian Ocean

NASA Astrophysics Data System (ADS)

Dominey-Howes, D.; Cummins, P. R.; Burbidge, D.

2005-12-01

The 2004 Boxing Day Tsunami dramatically highlighted the need for a better understanding of the tsunami hazard in the Indian Ocean. One of the most important foundations on which to base such an assessment is knowledge of tsunami that have affected the region in the historical past. We present a summary of the previously published catalog of Indian Ocean tsunami and the results of a preliminary search of archival material held at the India Records Office at the British Library in London. We demonstrate that in some cases, normal tidal movements and floods associated with tropical cyclones have been erroneously listed as tsunami. We summarise interesting archival material for tsunami that occurred in 1945, 1941, 1881, 1819, 1762 and a tsunami in 1843 not previously identified or reported. We also note the recent discovery, by a Canadian team during a post-tsunami survey following the 2004 Boxing Day Tsunami, of archival evidence that the Great Sumatra Earthquake of 1833 generated a teletsunami. Open ocean wave heights are calculated for some of the historical tsunami and compared with those of the Boxing Day Tsunami.

Magnetic and Electrical Characteristics of Permalloy Thin Tape Bobbin Cores

NASA Technical Reports Server (NTRS)

Schwarze, Gene E.; Wieserman, William R.; Niedra, Janis M.

2005-01-01

The core loss, that is, the power loss, of a soft ferromagnetic material is a function of the flux density, frequency, temperature, excitation type (voltage or current), excitation waveform (sine, square, etc.) and lamination or tape thickness. In previously published papers we have reported on the specific core loss and dynamic B-H loop results for several polycrystalline, nanocrystalline, and amorphous soft magnetic materials. In this previous research we investigated the effect of flux density, frequency, temperature, and excitation waveform for voltage excitation on the specific core loss and dynamic B-H loop. In this paper, we will report on an experimental study to investigate the effect of tape thicknesses of 1, 1/2, 1/4, and 1/8-mil Permalloy type magnetic materials on the specific core loss. The test cores were fabricated by winding the thin tapes on ceramic bobbin cores. The specific core loss tests were conducted at room temperature and over the frequency range of 10 kHz to 750 kHz using sine wave voltage excitation. The results of this experimental investigation will be presented primarily in graphical form to show the effect of tape thickness, frequency, and magnetic flux density on the specific core loss. Also, the experimental results when applied to power transformer design will be briefly discussed.

Fuel thermal conductivity (FTHCON). Status report. [PWR; BWR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hagrman, D. L.

1979-02-01

An improvement of the fuel thermal conductivity subcode is described which is part of the fuel rod behavior modeling task performed at EG and G Idaho, Inc. The original version was published in the Materials Properties (MATPRO) Handbook, Section A-2 (Fuel Thermal Conductivity). The improved version incorporates data which were not included in the previous work and omits some previously used data which are believed to come from cracked specimens. The models for the effect of porosity on thermal conductivity and for the electronic contribution to thermal coductivity have been completely revised in order to place these models on amore » more mechanistic basis. As a result of modeling improvements the standard error of the model with respect to its data base has been significantly reduced.« less

9 CFR 390.2 - Published materials.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Published materials. 390.2 Section 390.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND PUBLIC INFORMATION § 390.2 Published materials. FSIS rules and...

9 CFR 390.2 - Published materials.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Published materials. 390.2 Section 390.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND PUBLIC INFORMATION § 390.2 Published materials. FSIS rules and...

9 CFR 390.2 - Published materials.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Published materials. 390.2 Section 390.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND PUBLIC INFORMATION § 390.2 Published materials. FSIS rules and...

9 CFR 390.2 - Published materials.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Published materials. 390.2 Section 390.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FOOD SAFETY AND INSPECTION SERVICE ADMINISTRATIVE PROVISIONS FREEDOM OF INFORMATION AND PUBLIC INFORMATION § 390.2 Published materials. FSIS rules and...

The Cryogenic, High-Accuracy, Refraction Measuring System (CHARMS): A New Facility for Cryogenic Infrared through Vacuum Far-Ultraviolet Refractive Index Measurements

NASA Technical Reports Server (NTRS)

Frey, Bradley J.; Leviton, Douglas B.

2004-01-01

The optical designs of future NASA infrared (IR) missions and instruments, such as the James Webb Space Telescope's (JWST) Near-Mixed Camera (NIRCam), will rely on accurate knowledge of the index of refraction of various IR optical materials at cryogenic temperatures. To meet this need, we have developed a Cryogenic, High-Accuracy Refraction Measuring System (CHARMS). In this paper we discuss the completion of the design and construction of CHARMS as well as the engineering details that constrained the final design and hardware implementation. In addition, we will present our first light, cryogenic, IR index of refraction data for LiF, BaF2, and CaF2, and compare our results to previously published data for these materials.

Coastal erosion and wetland change in Louisiana: selected USGS products

USGS Publications Warehouse

Williams, S. Jeffress; Reid, Jamey M.; Cross, VeeAnn A.; Polloni, Christopher F.

2003-01-01

This Digital Data Series (DDS) report is primarily a selection of USGS science products that were previously published as paper atlases and maps but are no longer available in their original form. We have made an attempt to preserve the paper atlases by having them scanned in an efficient compressed digital format that provides a print-on-demand as well as a programmed viewing capability of the original material. We included additional materials bearing on aspects to enhance the scientific understanding of coastal erosion and wetland loss in Louisiana. In addition, this report contains multimedia-based publications including photographs, a 48-minute video, and map tools to allow the user to experience the many scientifically based research activities that are in progress along the coast of Louisiana.

Reaching More Students Through Thinking in Physics

NASA Astrophysics Data System (ADS)

Coletta, Vincent P.

2017-02-01

Thinking in Physics (TIP) is a new curriculum that is more effective than commonly used interactive engagement methods for students who have the greatest difficulty learning physics. Research has shown a correlation between learning in physics and other factors, including scientific reasoning ability. The TIP curriculum addresses those factors. Features of the curriculum and evidence of its effectiveness are described. The most recent version of the TIP curriculum has greatly reduced a substantial gender gap that previously existed. More details and sample materials are provided in Thinking in Physics, a book intended for instructors of introductory physics, published in 2014 by Pearson as part of its Educational Innovation series. Additional materials, both for students and instructors, are provided on the website http://thinkinginphysics.com. Both the book and the website are free.

Shape memory polyurethanes with oxidation-induced degradation: In vivo and in vitro correlations for endovascular material applications.

PubMed

Weems, Andrew C; Wacker, Kevin T; Carrow, James K; Boyle, Anthony J; Maitland, Duncan J

2017-09-01

The synthesis of thermoset shape memory polymer (SMP) polyurethanes from symmetric, aliphatic alcohols and diisocyanates has previously demonstrated excellent biocompatibility in short term in vitro and in vivo studies, although long term stability has not been investigated. Here we demonstrate that while rapid oxidation occurs in these thermoset SMPs, facilitated by the incorporation of multi-functional, branching amino groups, byproduct analysis does not indicate toxicological concern for these materials. Through complex multi-step chemical reactions, chain scission begins from the amines in the monomeric repeat units, and results, ultimately, in the formation of carboxylic acids, secondary and primary amines; the degradation rate and product concentrations were confirmed using liquid chromatography mass spectrometry, in model compound studies, yielding a previously unexamined degradation mechanism for these biomaterials. The rate of degradation is dependent on the hydrogen peroxide concentration, and comparison of explanted samples reveals a much slower rate in vivo compared to the widely accepted literature in vitro real-time equivalent of 3% H 2 O 2 . Cytotoxicity studies of the material surface, and examination of the degradation product accumulations, indicate that degradation has negligible impact on cytotoxicity of these materials. This paper presents an in-depth analysis on the degradation of porous, shape memory polyurethanes (SMPs), including traditional surface characterization as well as model degradation compounds with absolute quantification. This combination of techniques allows for determination of rates of degradation as well as accumulation of individual degradation products. These behaviors are used for in vivo-in vitro comparisons for determination of real time degradation rates. Previous studies have primarily been limited to surface characterization without examination of degradation products and accumulation rates. To our knowledge, our work presents a unique example where a range of material scales (atomistic-scale model compounds along with macroscopic porous SMPs) are used in conjunction with ex planted samples for calculation of degradation rates and toxicological risk. Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Translucency and Strength of High Translucency Monolithic Zirconium Oxide Materials

DTIC Science & Technology

2016-05-17

Zirconium-Oxide Materials presented at/published to the Journal of General Dentistry with MDWI 41-108, and has been assigned local file #16208. 2...PUBLISHED/PRESENTED. D 11a. PUBLICATION/JOURNAL (list intended publication/journal.) General Dentistry D 11b. PUBLISHED ABSTRACT (List intended...the most esthetic full veneer restorative material in dentistry for many years. In the mid-1900’s, dental materials researchers began marketing and

Publications of the Fossil Energy Advanced Research and Technology Development Materials Program: April 1, 1993-March 31, 1995

NASA Astrophysics Data System (ADS)

Carlson, Paul T.

1995-04-01

The objective of the Fossil Energy Advanced Research and Technology Development (AR and TD) Materials Program is to conduct research and development on materials for fossil energy applications, with a focus on the longer-term needs for materials with general applicability to the various fossil fuel technologies. The Program includes research aimed at a better understanding of materials behavior in fossil energy environments and on the development of new materials capable of substantial improvement in plant operations and reliability. The scope of the Program addresses materials requirements for all fossil energy systems, including materials for coal preparation, coal liquefaction, coal gasification, heat engines and heat recovery, combustion systems, and fuel cells. Work on the Program is conducted at national and government laboratories, universities, and industrial research facilities. This bibliography covers the period of April 1, 1993, through March 31, 1995, and is a supplement to previous bibliographies in this series. It is the intent of this series of bibliographies to list only those publications that can be conveniently obtained by a researcher through relatively normal channels. The publications listed in this document have been limited to topical reports, open literature publications in referred journals, full-length papers in published proceedings of conferences, full-length papers in unreferred journals, and books and book articles.

A case-crossover study of transient risk factors influence on occupational injuries: a study protocol based on a review of previous studies.

PubMed

Oesterlund, Anna H; Lander, Flemming; Lauritsen, Jens

2016-10-01

The occupational injury incident rate remains relatively high in the European Union. The case-crossover study gives a unique opportunity to study transient risk factors that normally would be very difficult to approach. Studies like this have been carried out in both America and Asia, but so far no relevant research has been conducted in Europe. Case-crossover studies of occupational injuries were collected from PubMed and Embase and read through. Previous experiences concerning method, exposure and outcome, time-related measurements and construction of the questionnaire were taken into account in the preparation of a pilot study. Consequently, experiences from the pilot study were used to design the study protocol. Approximately 2000 patients with an occupational injury will be recruited from the emergency departments in Herning and Odense, Denmark. A standardised questionnaire will be used to collect basic demographic data and information on eight transient risk factors. Based on previous studies and knowledge on occupational injuries the transient risk factors we chose to examine were: time pressure, performing a task with a different method/using unaccustomed technique, change in working surroundings, using a phone, disagreement, feeling ill, being distracted and using malfunctioning machinery/tools or work material. Exposure time 'just before the injury' will be compared with two control periods, 'previous day at the same time of the injury' (pair match) and the previous work week (usual frequency). This study protocol describes a unique opportunity to calculate the effect of transient risk factors on occupational injuries in a European setting. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Structure-property relations and modeling of small crack fatigue behavior of various magnesium alloys

NASA Astrophysics Data System (ADS)

Bernard, Jairus Daniel

Lightweight structural components are important to the automotive and aerospace industries so that better fuel economy can be realized. Magnesium alloys in particular are being examined to fulfill this need due to their attractive stiffness- and strength-to-weight ratios when compared to other materials. However, when introducing a material into new roles, one needs to properly characterize its mechanical properties. Fatigue behavior is especially important considering aerospace and automotive component applications. Therefore, quantifying the structure-property relationships and accurately predicting the fatigue behavior for these materials are vital. This study has two purposes. The first is to quantify the structure-property relationships for the fatigue behavior in an AM30 magnesium alloy. The second is to use the microstructural-based MultiStage Fatigue (MSF) model in order to accurately predict the fatigue behavior of three magnesium alloys: AM30, Elektron 21, and AZ61. While some studies have previously quantified the MSF material constants for several magnesium alloys, detailed research into the fatigue regimes, notably the microstructurally small crack (MSC) region, is lacking. Hence, the contribution of this work is the first of its kind to experimentally quantify the fatigue crack incubation and MSC regimes that are used for the MultiStage Fatigue model. Using a multi-faceted experimental approach, these regimes were explored with a replica method that used a dual-stage silicone based compound along with previously published in situ fatigue tests. These observations were used in calibrating the MultiStage Fatigue model.

Pharmacokinetic modeling of 4,4'-methylenedianiline released from reused polyurethane dialyzer potting materials.

PubMed

Do Luu, H M; Hutter, J C

2000-01-01

4, 4'-Methylenedianiline (MDA) is a hydrolysis degradation product that can be released from polyurethanes commonly used in medical device applications. MDA is mutagenic and carcinogenic in animals. In humans, it is hepatotoxic, a known contact and respiratory allergen, and a suspected carcinogen. A physiologically based pharmacokinetic (PBPK) model was developed to estimate the absorption, distribution, metabolism, and excretion of MDA in patients exposed to MDA leached from the potting materials of hemodialyzers. A worst-case reuse situation and a single use case were investigated. The PBPK model included five tissue compartments: liver, kidney, gastrointestinal tract, slowly perfused tissues, and richly perfused tissues. Physiological and chemical parameters of a healthy individual used in the model were obtained from the literature. The model was calibrated using previously published kinetic studies of IV administered doses of (14) C-MDA to rats. The model was validated using independent data published for MDA-exposed workers. The PBPK results indicated that dialysis patients who are exposed to MDA released from dialyzers (new or reused) could accumulate low levels of MDA and metabolites (total MDA) over time. Copyright 2000 John Wiley & Sons, Inc.

Tender love and transference: unpublished letters of C. G. Jung and Sabina Spielrein.

PubMed

Lothane, Z

1999-12-01

The author dissents from the widely accepted interpretation that the relationship between Sabina Spielrein and Carl Jung in the years 1904-1910 included sexual intercourse and constituted an ethical breach of the doctor-patient boundary in the course of a treatment. Spielrein declared that her treatment ended with her discharge from the Burghölzli hospital as Jung's patient in 1904-1905. Jung maintained he 'prolonged the relationship' in order to prevent a relapse and also referred to it as a friendship. Materials published in 1994 (letters, drafts, diaries, hospital chart) and unpublished letters recently found by the author in the Claparède archive in Geneva shed new light on previously published documents and interpretations by Carotenuto that have dominated the secondary literature since 1980. The new materials provide a more nuanced view of the Spielrein-Jung relationship and point to the function of non-erotic love in the therapeutic relationship. A new look at the Freud-Jung correspondence about the Spielrein-Jung relationship shows that Jung's perception that a sex scandal was initiated by Spielrein resulted from Jung's misreading of rumors concerning another woman; the episode had no ill effect on the relationship between Freud and Jung.

Does previous use affect litter box appeal in multi-cat households?

PubMed

Ellis, J J; McGowan, R T S; Martin, F

2017-08-01

It is commonly assumed that cats actively avoid eliminated materials (especially in multi-cat homes), suggesting regular litter box cleaning as the best defense against out-of-box elimination. The relationship between previous use and litter box appeal to familiar subsequent users is currently unknown. The purpose of this study was to investigate the relationship between previous litter box use and the identity of the previous user, type of elimination, odor, and presence of physical/visual obstructions in a multi-cat household scenario. Cats preferred a clean litter box to a dirty one, but the identity of the previous user had no impact on preferences. While the presence of odor from urine and/or feces did not impact litter box preferences, the presence of odorless faux-urine and/or feces did - with the presence of faux-feces being preferred over faux-urine. Results suggest neither malodor nor chemical communication play a role in litter box preferences, and instead emphasize the importance of regular removal of physical/visual obstructions as the key factor in promoting proper litter box use. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Leishmania species identification using FTA card sampling directly from patients' cutaneous lesions in the state of Lara, Venezuela.

PubMed

Kato, Hirotomo; Watanabe, Junko; Mendoza Nieto, Iraida; Korenaga, Masataka; Hashiguchi, Yoshihisa

2011-10-01

A molecular epidemiological study was performed using FTA card materials directly sampled from lesions of patients with cutaneous leishmaniasis (CL) in the state of Lara, Venezuela, where causative agents have been identified as Leishmania (Viannia) braziliensis and L. (Leishmania) venezuelensis in previous studies. Of the 17 patients diagnosed with CL, Leishmania spp. were successfully identified in 16 patients based on analysis of the cytochrome b gene and rRNA internal transcribed spacer sequences. Consistent with previous findings, seven of the patients were infected with L. (V.) braziliensis. However, parasites from the other nine patients were genetically identified as L. (L.) mexicana, which differed from results of previous enzymatic and antigenic analyses. These results strongly suggest that L. (L.) venezuelensis is a variant of L. (L.) mexicana and that the classification of L. (L.) venezuelensis should be reconsidered. Copyright © 2011 Royal Society of Tropical Medicine and Hygiene. Published by Elsevier Ltd. All rights reserved.

Publisher Source Directory: A List of Where to Buy or Rent Instructional Materials and Other Educational Aids, Devices, and Media Including More Than 1,600 Publishers and Producers in the U.S., Canada, and Europe. Revised Edition.

ERIC Educational Resources Information Center

National Center on Educational Media and Materials for the Handicapped, Columbus, OH.

Listed are more than 1,600 publishers, producers, and distributors of educational materials for use with the handicapped. Entries are presented in alphabetical order according to name. Beneath each source's name and address are code numbers which correspond to the type of materials each publisher's catalog lists. Provided is a list of the codes…

High Temperature Brush Seal Tuft Testing of Selected Nickel-Chrome and Cobalt-Chrome Superalloys

NASA Technical Reports Server (NTRS)

Fellenstein, James A.; DellaCorte, Christopher; Moore, Kenneth D.; Boyes, Esther

1997-01-01

The tribology of brush seals is of considerable interest to turbine engine designers because bristle wear continues to limit long term seal performance and life. To provide better materials characterization and foster the development of improved seals, NASA Lewis has developed a brush seal tuft tester. In this test, a 'paintbrush' sample tuft is loaded under constant contact pressure against the outside diameter of a rotating journal. With this configuration, load and friction are directly measured and accurate wear measurements are possible. Previously reported research using this facility showed excellent data repeatability and wear morphology similar to published seal data and dynamic rig tests. This paper is an update of the ongoing research into the tribology of brush seals. The effects of wire materials processing on seal wear and the tribological results for three journal coatings are discussed. Included in the materials processing were two nickel-chrome superalloys each processed to two different yield strengths. The results suggest that seal wear is dependent more on material composition than processing conditions.

Enhancing photocurrent transient spectroscopy by electromagnetic modeling.

PubMed

Diesinger, H; Panahandeh-Fard, M; Wang, Z; Baillargeat, D; Soci, C

2012-05-01

The shape and duration of photocurrent transients generated by a photoconductive switch depend on both the intrinsic response of the active material and the geometry of the transmission line structure. The present electromagnetic model decouples both shape forming contributions. In contrast to previously published work, it accounts for the particular operating mode of transient spectroscopy. The objective is to increase the time resolution by two approaches, by optimizing structural response and by deconvolving it from experimental data. The switch structure is represented by an effective transimpedance onto which the active material acts as current generator. As proof of concept, the response of a standard microstrip switch is modeled and deconvolved from experimental data acquired in GaAs, yielding a single exponential material response and hence supporting the validity of the approach. Beyond compensating for the response deterioration by the structure, switch architectures can be a priori optimized with respect to frequency response. As an example, it is shown that a microstrip gap that can be deposited on materials incompatible with standard lithography reduces pulse broadening by an order of magnitude if it is provided with transitions to coplanar access lines.

Re-examination of the eastern Pacific and Atlantic material of Alpheus malleator Dana, 1852, with the description of Alpheus wonkimi sp. nov. (Crustacea, Decapoda, Alpheidae).

PubMed

Anker, Arthur; Pachelle, Paulo P G

2013-01-01

The bumpy-clawed snapping shrimp, Alpheus malleator Dana, 1852 (Alpheidae), is revised based on the recently collected and older museum material from the eastern Pacific (Panama, Ecuador), Caribbean (Panama, Puerto Rico, Trinidad & Tobago), Brazil (São Paulo), and West Africa (Cape Verde, Senegal, Guinea, Equatorial Guinea, Congo). The eastern Pacific material is assigned to A. wonkimi sp. nov., based on one morphological difference in the colour and thickness of the uropodal spiniform seta, as well as previously published molecular data. The Caribbean, Brazilian and West African material is considered to represent a single, widespread, morphologically variable, amphi-Atlantic taxon, A. malleator. Alpheus pugilator A. Milne-Edwards, 1878 is retained as ajunior synonym of A. malleator, whereas A. tuberculosus Osorio, 1892, A. malleator var. edentatus Zimmer, 1913 and A. belli Coutière, 1898, the latter two based on juvenile specimens, are tentatively placed in the synonymy of A. malleator. Illustrations, including colour photographs, are provided for A. wonkimi sp. nov. and A. malleator and their morphological variability is discussed and illustrated.

Modeling Dynamic Anisotropic Behaviour and Spall Failure in Commercial Aluminium Alloys AA7010

NASA Astrophysics Data System (ADS)

Mohd Nor, M. K.; Ma'at, N.; Ho, C. S.

2018-04-01

This paper presents a finite strain constitutive model to predict a complex elastoplastic deformation behaviour involves very high pressures and shockwaves in orthotropic materials of aluminium alloys. The previous published constitutive model is used as a reference to start the development in this work. The proposed formulation that used a new definition of Mandel stress tensor to define Hill's yield criterion and a new shock equation of state (EOS) of the generalised orthotropic pressure is further enhanced with Grady spall failure model to closely predict shockwave propagation and spall failure in the chosen commercial aluminium alloy. This hyperelastic-plastic constitutive model is implemented as a new material model in the Lawrence Livermore National Laboratory (LLNL)-DYNA3D code of UTHM's version, named Material Type 92 (Mat92). The implementations of a new EOS of the generalised orthotropic pressure including the spall failure are also discussed in this paper. The capability of the proposed constitutive model to capture the complex behaviour of the selected material is validated against range of Plate Impact Test data at 234, 450 and 895 ms-1 impact velocities.

Study of PRIMAVERA steel samples by a positron annihilation spectroscopy technique

NASA Astrophysics Data System (ADS)

Grafutin, V.; Ilyukhina, O.; Krsjak, V.; Burcl, R.; Hähner, P.; Erak, D.; Zeman, A.

2010-11-01

In the present article, a positron annihilation spectroscopy investigation of VVER-440/230 weld materials is discussed. Important characteristics of metals such as Fermi energy, concentration of electrons in the conduction band, size and concentration of defects were experimentally determined for three model materials with higher level of copper (0.16 wt.%) and phosphorus (0.027-0.038 wt.%). The impact of neutron irradiation and subsequent annealing on crystal lattice parameters was investigated. The experiments with the angular correlation of positron annihilation radiation (ACAR) complement the published positron annihilation spectroscopy (PAS) studies of the radiation treated VVER materials as well as previous experiments on PRIMAVERA materials. The availability of the experimental reactor to prepare strong 64Cu positron sources provided for unique experimental conditions, such as good resolution of spectra (0.4 mrad) and reasonable short time of measurement (36 h). The present paper aims to contribute to further understanding of RPV (reactor pressure vessel) steels behaviour under irradiation conditions as well as annealing recovery procedures, which have already been applied at several VVER NPP units in Europe.

Percolation of binary disk systems: Modeling and theory

DOE PAGES

Meeks, Kelsey; Tencer, John; Pantoya, Michelle L.

2017-01-12

The dispersion and connectivity of particles with a high degree of polydispersity is relevant to problems involving composite material properties and reaction decomposition prediction and has been the subject of much study in the literature. This paper utilizes Monte Carlo models to predict percolation thresholds for a two-dimensional systems containing disks of two different radii. Monte Carlo simulations and spanning probability are used to extend prior models into regions of higher polydispersity than those previously considered. A correlation to predict the percolation threshold for binary disk systems is proposed based on the extended dataset presented in this work and comparedmore » to previously published correlations. Finally, a set of boundary conditions necessary for a good fit is presented, and a condition for maximizing percolation threshold for binary disk systems is suggested.« less

Metabolism: The Physiological Power-Generating Process: A History of Methods to Test Human Beings' \\"Vital Capacity\\" [Retrospectroscope].

PubMed

Johnston, Richard; Valentinuzzi, Max E

2016-01-01

A previous "Retrospectroscope" note, published early in 2014, dealt with spirometry: it described many apparatuses used to measure the volume of inhaled and exhaled air that results from breathing [1]. Such machines, when adequately modified, are also able to measure the rate at which work is produced (specifically by an animal or a human being). Metabolism in that sense is the term used by physiologists and physicians, a word that in Greek, metabolismos, means "change" or "overthrow," in the sense of breaking down material, as in burning some stuff.

Molecular Beam Epitaxy of lithium niobium oxide multifunctional materials

NASA Astrophysics Data System (ADS)

Tellekamp, M. Brooks; Shank, Joshua C.; Doolittle, W. Alan

2017-04-01

The role of stoichiometry and growth temperature in the preferential nucleation of material phases in the Li-Nb-O family are explored yielding an empirical growth phase diagram. It is shown that while single parameter variation often produces multi-phase films, combining substrate temperature control with the previously published lithium flux limited growth allows the repeatable growth of high quality single crystalline films of many different oxide phases. Higher temperatures (800-1050 °C) than normally used in MBE were necessary to achieve high quality materials. At these temperatures the desorption of surface species is shown to play an important role in film composition. Using this method single phase films of NbO, NbO2, LiNbO2, Li3NbO4, LiNbO3, and LiNb3O8 have been achieved in the same growth system, all on c-plane sapphire. Finally, the future of these films in functional oxide heterostructures is briefly discussed.

Unraveling the Semiconducting/Metallic Discrepancy in Ni 3(HITP) 2

DOE PAGES

Foster, Michael E.; Sohlberg, Karl; Allendorf, Mark D.; ...

2018-01-10

Here, Ni 3(2,3,6,7,10,11-hexaiminotriphenylene) 2 is a π-stacked layered metal–organic framework material with extended π-conjugation that is analogous to graphene. Published experimental results indicate that the material is semiconducting, but all theoretical studies to date predict the bulk material to be metallic. Given that previous experimental work was carried out on specimens containing complex nanocrystalline microstructures and the tendency for internal interfaces to introduce transport barriers, we apply DFT to investigate the influence of internal interface defects on the electronic structure of Ni 3(HITP) 2. The results show that interface defects can introduce a transport barrier by breaking the π-conjugation and/ormore » decreasing the dispersion of the electronic bands near the Fermi level. We demonstrate that the presence of defects can open a small gap, in the range of 15–200 meV, which is consistent with the experimentally inferred hopping barrier.« less

Enantiomer fractions of polychlorinated biphenyls in three selected Standard Reference Materials.

PubMed

Morrissey, Joshua A; Bleackley, Derek S; Warner, Nicholas A; Wong, Charles S

2007-01-01

The enantiomer composition of six chiral polychlorinated biphenyls (PCBs) were measured in three different certified Standard Reference Materials (SRMs) from the US National Institute of Standards and Technology (NIST): SRM 1946 (Lake Superior fish tissue), SRM 1939a (PCB Congeners in Hudson River Sediment), and SRM 2978 (organic contaminants in mussel tissue--Raritan Bay, New Jersey) to aid in quality assurance/quality control methodologies in the study of chiral pollutants in sediments and biota. Enantiomer fractions (EFs) of PCBs 91, 95, 136, 149, 174, and 183 were measured using a suite of chiral columns by gas chromatography/mass spectrometry. Concentrations of target analytes were in agreement with certified values. Target analyte EFs in reference materials were measured precisely (<2% relative standard deviation), indicating the utility of SRM in quality assurance/control methodologies for analyses of chiral compounds in environmental samples. Measured EFs were also in agreement with previously published analyses of similar samples, indicating that similar enantioselective processes were taking place in these environmental matrices.

Editorial

NASA Astrophysics Data System (ADS)

Dinescu, Maria; D'Addato, Sergio; Giapintzakis, Ioannis (John); Wójcik, Marek

2017-02-01

The symposium V entitled "Stress, structure and stoichiometry effects on the properties of nanomaterials" was organized for the third time during the European Materials Research Society Fall Meeting 2015 in Warsaw, following the previous two successful symposia held in 2011 and 2013. Four sessions were jointly organized with the symposium W entitled "Nanoscale separations in spintronic materials, superconductors, and other systems". Both symposia (V and W) were co-organized by the EU 7-th Framework Programme under the project REGPOT-CT-2013-316014 (EAgLE). Overall, more than 70 scientists attended the symposium V, as they presented 10 invited talks, 26 oral contributions and 28 posters, covering many different and new subjects in nanostructures, thin films and interfaces. Representative articles are published in this proceedings volume. We would like to thank the participants who submitted high quality articles and the referees who helped us with excellent and timely reports.

Student attitudes towards clinical teaching resources in complementary medicine: a focus group examination of Australian naturopathic medicine students.

PubMed

Wardle, Jonathan Lee; Sarris, Jerome

2014-06-01

Complementary medicine is forming an increasingly large part of health care in developed countries and is increasingly being formally taught in tertiary academic settings. An exploratory study of naturopathic student perceptions of, use of and attitudes towards teaching resources in naturopathic clinical training and education. Focus groups were conducted with current and recent students of 4-year naturopathic degree programmes in Brisbane and Sydney to ascertain how they interact with clinical teaching materials, and their perceptions and attitudes towards teaching materials in naturopathic education. Naturopathic students have a complex and critical relationship with their learning materials. Although naturopathic practice is often defined by traditional evidence, students want information that both supports and is critical of traditional naturopathic practices, and focuses heavily on evidence-based medicine. Students remain largely ambivalent about new teaching technologies and would prefer that these develop organically as an evolution from printed materials, rather than depart from dramatically and radically from these previously established materials. Findings from this study will assist publishers, librarians and academics develop clinical information sources that appropriately meet student expectations and support their learning requirements. © 2014 The authors. Health Information and Libraries Journal © 2014 Health Libraries Group.

SU-E-I-42: Some New Aspects of the Energy Weighting Technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ganezer, K; Krmar, M; Josipovic, I

2015-06-15

Purpose: The development in the last few years of photon-counting pixel detectors creates an important and significant opportunity for x-ray spectroscopy to be applied in diagnostics. The energy weighting technique was originally developed to obtain the maximum benefit from the spectroscopic information. In all previous published papers the concept of an energy weighting function was tested on relatively simple test objects having only two materials with different absorption coefficients. Methods: In this study the shape of the energy weighting function was investigated with a set of ten trabecular bone test objects each with a similar geometry and structure but withmore » different attenuation properties. In previous publications it was determined that the function E-3 was a very good choice for the weighting function (wi). Results: The most important Result from this study was the discovery that a single function of the form E-b was not sufficient to explain the energy dependence of the different types of materials that might be used to describe common bodily tissues such as trabecular bone. It was also determined from the data contained in this paper that the exponent b is often significantly dependent upon the attenuation properties of the materials that were used to make the test objects. Conclusion: Studies of the attenuation properties will be useful in further studies involving energy weighting.« less

41 CFR 102-2.115 - What kinds of non-regulatory material does GSA publish outside of the FMR?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What kinds of non-regulatory material does GSA publish outside of the FMR? 102-2.115 Section 102-2.115 Public Contracts and....115 What kinds of non-regulatory material does GSA publish outside of the FMR? As GSA converts the...

Determination of palladium, platinum and rhodium in geologic materials by fire assay and emission spectrography

USGS Publications Warehouse

Hapfty, J.; Riley, L.B.

1968-01-01

A method is described for the determination of palladium down to 4ppb (parts per billion, 109), platinum down to 10 ppb and rhodium down to 5 ppb in 15 g of sample. Fire-assay techniques are used to preconcentrate the platinum metals into a gold bead, then the bead is dissolved in aqua regia and diluted to volume with 1M hydrochloric acid. The solution is analysed by optical emission spectrography of the residue from 200 ??l of it evaporated on a pair of flat-top graphite electrodes. This method requires much less sample handling than most published methods for these elements. Data are presented for G-1, W-1, and six new standard rocks of the U.S. Geological Survey. The values for palladium in W-1 are in reasonable agreement with previously published data. ?? 1968.

Biomechanical validation of an artificial tooth–periodontal ligament–bone complex for in vitro orthodontic load measurement

PubMed Central

Xia, Zeyang; Chen, Jie

2014-01-01

Objectives To develop an artificial tooth–periodontal ligament (PDL)–bone complex (ATPBC) that simulates clinical crown displacement. Material and Methods An ATPBC was created. It had a socket hosting a tooth with a thin layer of silicon mixture in between for simulating the PDL. The complex was attached to a device that allows applying a controlled force to the crown and measuring the resulting crown displacement. Crown displacements were compared to previously published data for validation. Results The ATPBC that had a PDL made of two types of silicones, 50% gasket sealant No. 2 and 50% RTV 587 silicone, with a thickness of 0.3 mm, simulated the PDL well. The mechanical behaviors (1) force-displacement relationship, (2) stress relaxation, (3) creep, and (4) hysteresis were validated by the published results. Conclusion The ATPBC simulated the crown displacement behavior reported from biological studies well. PMID:22970752

Metal artifact reduction for CT-based luggage screening.

PubMed

Karimi, Seemeen; Martz, Harry; Cosman, Pamela

2015-01-01

In aviation security, checked luggage is screened by computed tomography scanning. Metal objects in the bags create artifacts that degrade image quality. Though there exist metal artifact reduction (MAR) methods mainly in medical imaging literature, they require knowledge of the materials in the scan, or are outlier rejection methods. To improve and evaluate a MAR method we previously introduced, that does not require knowledge of the materials in the scan, and gives good results on data with large quantities and different kinds of metal. We describe in detail an optimization which de-emphasizes metal projections and has a constraint for beam hardening and scatter. This method isolates and reduces artifacts in an intermediate image, which is then fed to a previously published sinogram replacement method. We evaluate the algorithm for luggage data containing multiple and large metal objects. We define measures of artifact reduction, and compare this method against others in MAR literature. Metal artifacts were reduced in our test images, even for multiple and large metal objects, without much loss of structure or resolution. Our MAR method outperforms the methods with which we compared it. Our approach does not make assumptions about image content, nor does it discard metal projections.

Electronic reserves: copyright and permissions

PubMed Central

Graves, Karen J.

2000-01-01

Electronic reserves present a new service option for libraries to provide needed materials during hours that the library is not open and to user groups located some distance from library collections. Possible changes to current copyright law and publishers permissions policies have delayed the development of electronic reserves in many libraries. This paper reviews the current state of electronic reserves materials in the publishing and library communities and presents the results of a survey of publishers to determine permissions policies for electronic materials. Issues of concern to both libraries and publishers are discussed. PMID:10658960

[The topical problems of the car accident injury emerging from the materials of the articles published in the journal "Sudebno-meditsinskaya ekspertiza" during the period from 1958 to 2012].

PubMed

Fetisov, V A; Smirenin, S A; Nesterov, A V; Khabova, Z S

2014-01-01

The authors undertook the scientometric analysis of the articles published in the journal "Sudebno-meditsinskaya ekspertiza" during the last 55 years (from 1958 to 2012) with special reference to the information support of research and practical activities of forensic medical experts in this country concerning the topical problems of the car accident injury. The search for relevant information revealed a total of 111 articles that were categorized into several groups for their further systematization and analysis with the view for improving the effectiveness of research and experimental studies in the framework of the principal activities of the State Sanitary and Epidemiological Department of the Russian Federation. This article is an extension of previous publications of the authors concerning the main aspects of the car accident injury. The forthcoming reports to be published in the journal "Sudebno-meditsinskaya ekspertiza" will present the results of the further in-depth scientometric analysis of the data on road accidents in this country.

A revision in hydrogen isotopic composition of USGS42 and USGS43 human-hair stable isotopic reference materials for forensic science.

PubMed

Coplen, Tyler B; Qi, Haiping

2016-09-01

The hydrogen isotopic composition (δ(2)HVSMOW-SLAP) of USGS42 and USGS43 human hair stable isotopic reference materials, normalized to the VSMOW (Vienna-Standard Mean Ocean Water)-SLAP (Standard Light Antarctic Precipitation) scale, was originally determined with a high temperature conversion technique using an elemental analyzer (TC/EA) with a glassy carbon tube and glassy carbon filling and analysis by isotope-ratio mass spectrometer (IRMS). However, the TC/EA IRMS method can produce inaccurate δ(2)HVSMOW-SLAP results when analyzing nitrogen-bearing organic substances owing to the formation of hydrogen cyanide (HCN), leading to non-quantitative conversion of a sample into molecular hydrogen (H2) for IRMS analysis. A single-oven, chromium-filled, elemental analyzer (Cr-EA) coupled to an IRMS substantially improves the measurement quality and reliability of hydrogen isotopic analysis of hydrogen- and nitrogen-bearing organic material because hot chromium scavenges all reactive elements except hydrogen. USGS42 and USGS43 human hair isotopic reference materials have been analyzed with the Cr-EA IRMS method, and the δ(2)HVSMOW-SLAP values of their non-exchangeable hydrogen fractions have been revised: [Formula: see text] [Formula: see text] where mUr=0.001=‰. On average, these revised δ(2)HVSMOW-SLAP values are 5.7mUr more positive than those previously measured. It is critical that readers pay attention to the δ(2)HVSMOW-SLAP of isotopic reference materials in publications as they may need to adjust the δ(2)HVSMOW-SLAP measurement results of human hair in previous publications to ensure all results are on the same isotope-delta scale. Published by Elsevier Ireland Ltd.

Effects of stroke education using an animated cartoon and a manga on elementary school children.

PubMed

Sakamoto, Yuki; Yokota, Chiaki; Miyashita, Fumio; Amano, Tatsuo; Shigehatake, Yuya; Oyama, Satoshi; Itagaki, Naruhiko; Okumura, Kosuke; Toyoda, Kazunori; Minematsu, Kazuo

2014-08-01

Stroke education for the youth is expected to reduce prehospital delay by informing the bystander of appropriate action to take and providing knowledge to prevent onset of stroke in future. Previously, we developed effective teaching materials consisting of an animated cartoon and a Manga for junior high school students. The aim of this study was to evaluate the feasibility and effectiveness of our educational materials for stroke education taught by schoolteachers to elementary school children. Using our teaching materials, a 30-minute lesson was given by trained general schoolteachers. Questionnaires on stroke knowledge (symptoms and risk factors) and action to take on identification of suspected stroke symptoms were filled out by school children before, immediately after, and at 3 months after completion of the lesson. A total of 219 children (aged 10 or 11 years) received the stroke lesson. Stroke knowledge significantly increased immediately after the lesson compared with before (symptoms, P < .001; risk factors, P < .001); however, correct answer rates decreased at 3 months immediately after completion of the lesson (symptoms, P = .002; risk factors, P = .045). The proportion of the number of children calling emergency medical service on identifying stroke symptoms was higher immediately after the lesson than baseline (P = .007) but returned to the baseline at 3 months after the lesson. Stroke lesson by schoolteachers using our teaching materials consisting of an animated cartoon and a Manga that was previously used for junior high school students was feasible for elementary school children. However, revision of the materials is required for better retention of stroke knowledge for children. Copyright © 2014 National Stroke Association. Published by Elsevier Inc. All rights reserved.

Publications of the Fossil Energy Advanced Research and Technology Development Materials Program: April 1, 1993--March 31, 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carlson, P.T.

1995-04-01

The objective of the Fossil Energy Advanced Research and Technology Development (AR and TD) Materials Program is to conduct research and development on materials for fossil energy applications, with a focus on the longer-term needs for materials with general applicability to the various fossil fuel technologies. The Program includes research aimed at a better understanding of materials behavior in fossil energy environments and on the development of new materials capable of substantial improvement in plant operations and reliability. The scope of the Program addresses materials requirements for all fossil energy systems, including materials for coal preparation, coal liquefaction, coal gasification,more » heat engines and heat recovery, combustion systems, and fuel cells. Work on the Program is conducted at national and government laboratories, universities, and industrial research facilities. This bibliography covers the period of April 1, 1993, through March 31, 1995, and is a supplement to previous bibliographies in this series. It is the intent of this series of bibliographies to list only those publications that can be conveniently obtained by a researcher through relatively normal channels. The publications listed in this document have been limited to topical reports, open literature publications in refereed journals, full-length papers in published proceedings of conferences, full-length papers in unrefereed journals, and books and book articles. 159 refs.« less

20th century Betula pubescens subsp. czerepanovii tree- and forest lines in Norway.

PubMed

Bryn, Anders; Potthoff, Kerstin

2017-01-01

Georeferenced tree- and forest line data has a wide range of applications and are increasingly used for e.g. monitoring of climate change impacts and range shift modelling. As part of a research project, registrations of previously re-mapped tree- and forest lines have been georeferenced. The data described in this paper contains 100 re-mapped registrations of Betula pubescens subsp. czerepanovii throughout Norway. All of the re-mapped tree- and forest line localities are georeferenced, elevation and aspect are given, elevational and spatial uncertainty are provided, and the re-mapping methods are explained. The published data weremapped for the first time between 1819 and 1963. The same sites were re-mapped between 1928 and 1996, but have until now been missing spatial coordinates. The entries contain 40 x 2 tree lines and 60 x 2 forest lines, most likely presenting the regionally highest registered tree- and forest lines at the given time. The entire material is stored and available for download through the GBIF server. Previously, the entries have been published in journals or reports, partly in Norwegian or German only. Without the provision of the spatial coordinates, the specific locations have been unknown. The material is now available for modelling and monitoring of tree- and forest line range shifts: The recordings are useful for interpretation of climate change impacts on tree- and forest lines, and the locations of re-mapped tree- and forest lines can be implemented in future monitoring projects. Since the recordings most likely provide the highest registered Betula pubescens subsp. czerepanovii locations within their specific regions, they are probably representing the contemporary physiognomic range limits.

Optimization of Anodic Porous Alumina Fabricated from Commercial Aluminum Food Foils: A Statistical Approach

PubMed Central

Riccomagno, Eva; Shayganpour, Amirreza; Salerno, Marco

2017-01-01

Anodic porous alumina is a known material based on an old industry, yet with emerging applications in nanoscience and nanotechnology. This is promising, but the nanostructured alumina should be fabricated from inexpensive raw material. We fabricated porous alumina from commercial aluminum food plate in 0.4 M aqueous phosphoric acid, aiming to design an effective manufacturing protocol for the material used as nanoporous filler in dental restorative composites, an application demonstrated previously by our group. We identified the critical input parameters of anodization voltage, bath temperature and anodization time, and the main output parameters of pore diameter, pore spacing and oxide thickness. Scanning electron microscopy and grain analysis allowed us to assess the nanostructured material, and the statistical design of experiments was used to optimize its fabrication. We analyzed a preliminary dataset, designed a second dataset aimed at clarifying the correlations between input and output parameters, and ran a confirmation dataset. Anodization conditions close to 125 V, 20 °C, and 7 h were identified as the best for obtaining, in the shortest possible time, pore diameters and spacing of 100–150 nm and 150–275 nm respectively, and thickness of 6–8 µm, which are desirable for the selected application according to previously published results. Our analysis confirmed the linear dependence of pore size on anodization voltage and of thickness on anodization time. The importance of proper control on the experiment was highlighted, since batch effects emerge when the experimental conditions are not exactly reproduced. PMID:28772776

Porous titanium bases for osteochondral tissue engineering.

PubMed

Nover, Adam B; Lee, Stephanie L; Georgescu, Maria S; Howard, Daniel R; Saunders, Reuben A; Yu, William T; Klein, Robert W; Napolitano, Anthony P; Ateshian, Gerard A; Hung, Clark T

2015-11-01

Tissue engineering of osteochondral grafts may offer a cell-based alternative to native allografts, which are in short supply. Previous studies promote the fabrication of grafts consisting of a viable cell-seeded hydrogel integrated atop a porous, bone-like metal. Advantages of the manufacturing process have led to the evaluation of porous titanium as the bone-like base material. Here, porous titanium was shown to support the growth of cartilage to produce native levels of Young's modulus, using a clinically relevant cell source. Mechanical and biochemical properties were similar or higher for the osteochondral constructs compared to chondral-only controls. Further investigation into the mechanical influence of the base on the composite material suggests that underlying pores may decrease interstitial fluid pressurization and applied strains, which may be overcome by alterations to the base structure. Future studies aim to optimize titanium-based tissue engineered osteochondral constructs to best match the structural architecture and strength of native grafts. The studies described in this manuscript follow up on previous studies from our lab pertaining to the fabrication of osteochondral grafts that consist of a bone-like porous metal and a chondrocyte-seeded hydrogel. Here, tissue engineered osteochondral grafts were cultured to native stiffness using adult chondrocytes, a clinically relevant cell source, and a porous titanium base, a material currently used in clinical implants. This porous titanium is manufactured via selective laser melting, offering the advantages of precise control over shape, pore size, and orientation. Additionally, this manuscript describes the mechanical influence of the porous base, which may have applicability to porous bases derived from other materials. Copyright © 2015. Published by Elsevier Ltd.

Nutrition Education and Training Curriculum Materials.

ERIC Educational Resources Information Center

Illinois State Board of Education, Springfield.

Published by the Illinois Office of Education, this document lists resource materials and information regarding nutrition education to be used by educators in planning and implementing nutrition programs. These include audiovisual aids (movies, filmstrips, and videotapes), published text materials on health/nutrition, curriculum guides, teacher…

Compositional mapping of Saturn's satellite Dione with Cassini VIMS and implications of dark material in the Saturn system

USGS Publications Warehouse

Clark, R.N.; Curchin, J.M.; Jaumann, R.; Cruikshank, D.P.; Brown, R.H.; Hoefen, T.M.; Stephan, K.; Moore, Johnnie N.; Buratti, B.J.; Baines, K.H.; Nicholson, P.D.; Nelson, R.M.

2008-01-01

Cassini VIMS has obtained spatially resolved imaging spectroscopy data on numerous satellites of Saturn. A very close fly-by of Dione provided key information for solving the riddle of the origin of the dark material in the Saturn system. The Dione VIMS data show a pattern of bombardment of fine, sub-0.5-??m diameter particles impacting the satellite from the trailing side direction. Multiple lines of evidence point to an external origin for the dark material on Dione, including the global spatial pattern of dark material, local patterns including crater and cliff walls shielding implantation on slopes facing away from the trailing side, exposing clean ice, and slopes facing the trailing direction which show higher abundances of dark material. Multiple spectral features of the dark material match those seen on Phoebe, Iapetus, Hyperion, Epimetheus and the F-ring, implying the material has a common composition throughout the Saturn system. However, the exact composition of the dark material remains a mystery, except that bound water and, tentatively, ammonia are detected, and there is evidence both for and against cyanide compounds. Exact identification of composition requires additional laboratory work. A blue scattering peak with a strong UV-visible absorption is observed in spectra of all satellites which contain dark material, and the cause is Rayleigh scattering, again pointing to a common origin. The Rayleigh scattering effect is confirmed with laboratory experiments using ice and 0.2-??m diameter carbon grains when the carbon abundance is less than about 2% by weight. Rayleigh scattering in solids is also confirmed in naturally occurring terrestrial rocks, and in previously published reflectance studies. The spatial pattern, Rayleigh scattering effect, and spectral properties argue that the dark material is only a thin coating on Dione's surface, and by extension is only a thin coating on Phoebe, Hyperion, and Iapetus, although the dark material abundance appears higher on Iapetus, and may be locally thick. As previously concluded for Phoebe, the dark material appears to be external to the Saturn system and may be cometary in origin. We also report a possible detection of material around Dione which may indicate Dione is active and contributes material to the E-ring, but this observation must be confirmed.

Quantifying the degradation of TNT and RDX in a saline environment with and without UV-exposure.

PubMed

Sisco, Edward; Najarro, Marcela; Bridge, Candice; Aranda, Roman

2015-06-01

Terrorist attacks in a maritime setting, such as the bombing of the USS Cole in 2000, or the detection of underwater mines, require the development of proper protocols to collect and analyse explosive material from a marine environment. In addition to proper analysis of the explosive material, protocols must also consider the exposure of the material to potentially deleterious elements, such as UV light and salinity, time spent in the environment, and time between storage and analysis. To understand how traditional explosives would be affected by such conditions, saline solutions of explosives were exposed to natural and artificial sunlight. Degradation of the explosives over time was then quantified using negative chemical ionization gas chromatography mass spectrometry (GC/NCI-MS). Two explosives, trinitrotoluene (TNT) and cyclotrimethylenetrinitramine (RDX), were exposed to different aqueous environments and light exposures with salinities ranging from freshwater to twice the salinity of ocean water. Solutions were then aged for up to 6 months to simulate different conditions the explosives may be recovered from. Salinity was found to have a negligible impact on the degradation of both RDX and TNT. RDX was stable in solutions of all salinities while TNT solutions degraded regardless of salinity. Solutions of varying salinities were also exposed to UV light, where accelerated degradation was seen for both explosives. Potential degradation products of TNT were identified using electrospray ionization mass spectrometry (ESI-MS), and correspond to proposed degradation products discussed in previously published works [1]. Published by Elsevier Ireland Ltd.

Mortality of aircraft maintenance workers exposed to trichloroethylene and other hydrocarbons and chemicals: extended follow up

PubMed Central

Radican, Larry; Blair, Aaron; Stewart, Patricia; Wartenberg, Daniel

2009-01-01

Objective To extend follow-up of 14,455 workers from 1990 to 2000, and evaluate mortality risk from exposure to trichloroethylene (TCE) and other chemicals. Methods Multivariable Cox models were used to estimate relative risk for exposed vs. unexposed workers based on previously developed exposure surrogates. Results Among TCE exposed workers, there was no statistically significant increased risk of all-cause mortality (RR=1.04) or death from all cancers (RR=1.03). Exposure-response gradients for TCE were relatively flat and did not materially change since 1990. Statistically significant excesses were found for several chemical exposure subgroups and causes, and were generally consistent with the previous follow up. Conclusions Patterns of mortality have not changed substantially since 1990. While positive associations with several cancers were observed, and are consistent with the published literature, interpretation is limited due to the small numbers of events for specific exposures. PMID:19001957

Neuroendocrine-type prostatic adenocarcinoma with microsatellite instability in a patient with lynch syndrome.

PubMed

Wagner, David G; Gatalica, Zoran; Lynch, Henry T; Kohl, Shane; Johansson, Sonny L; Lele, Subodh M

2010-12-01

Lynch syndrome is an autosomal-dominant cancer syndrome that can be identified with microsatellite instability molecular tests or immunohistochemical stains on pathologic material from patients who meet the Amsterdam Criteria II. The development of prostatic carcinoma in situ or invasive small cell carcinoma (SCC) of the prostate has not been previously reported in a patient with this syndrome. In this report, an 87-year-old White man with the Lynch syndrome had a prostate biopsy that revealed a mixed high-grade conventional adenocarcinoma and SCC of the prostate with high-grade prostatic intraepithelial neoplasia of the small cell neuroendocrine-type (HGPIN-NE), all showing MSH2 microsatellite instability and loss of MSH2 expression, a finding not previously published. These findings suggest that HGPIN-NE is a precursor of invasive SCC and also that prostatic SCC can develop in a patient with the Lynch syndrome.

Reference Accuracy among Research Articles Published in "Research on Social Work Practice"

ERIC Educational Resources Information Center

Wilks, Scott E.; Geiger, Jennifer R.; Bates, Samantha M.; Wright, Amy L.

2017-01-01

Objective: The objective was to examine reference errors in research articles published in Research on Social Work Practice. High rates of reference errors in other top social work journals have been noted in previous studies. Methods: Via a sampling frame of 22,177 total references among 464 research articles published in the previous decade, a…

Restrictions impeding web-based courses: a survey of publishers' variation in authorising access to high quality on-line literature.

PubMed

Langlois, Michele; Heller, Richard F; Edwards, Richard; Lyratzopoulos, Georgios; Sandars, John

2004-04-07

Web-based delivery of educational programmes is becoming increasingly popular and is expected to expand, especially in medicine. The successful implementation of these programmes is reliant on their ability to provide access to web based materials, including high quality published work. Publishers' responses to requests to access health literature in the context of developing an electronic Master's degree course are described. Two different permission requests were submitted to publishers. The first was to store an electronic version of a journal article, to which we subscribe, on a secure password protected server. The second was to reproduce extracts of published material on password protected web pages and CD Rom. Eight of 16 publishers were willing to grant permission to store electronic versions of articles without levying charges additional to the subscription. Twenty of 35 publishers gave permission to reproduce extracts of published work at no fee. Publishers' responses were highly variable to the requests for access to published material. This may be influenced by vague terminology within the 'fair dealing' provision in the copyright legislation, which seems to leave it open to individual interpretation. Considerable resource costs were incurred by the exercise. Time expended included those incurred by us: research to identify informed representatives within the publishing organisation, request 'chase-ups' and alternative examples being sought if publishers were uncooperative; and the publisher when dealing with numerous permission requests. Financial costs were also incurred by both parties through additional staffing and paperwork generated by the permission process, the latter including those purely borne by educators due to the necessary provision of photocopy 'course packs' when no suitably alternative material could be found if publishers were uncooperative. Finally we discuss the resultant bias in material towards readily available electronic resources as a result of publisher's uncooperative stance and encourage initiatives that aim to improve open electronic access. The permission request process has been expensive and has resulted in reduced access for students to the relevant literature. Variations in the responses from publishers suggest that for educational purposes common policies could be agreed and unnecessary restrictions removed in the future.

The Spectrum of WRN Mutations in Werner Syndrome Patients

PubMed Central

Huang, Shurong; Lee, Lin; Hanson, Nancy B.; Lenaerts, Catherine; Hoehn, Holger; Poot, Martin; Rubin, Craig D.; Chen, Da-Fu; Yang, Chih-Chao; Juch, Heike; Dorn, Thomas; Spiegel, Roland; Oral, Elif Arioglu; Abid, Mohammed; Battisti, Carla; Lucci-Cordisco, Emanuela; Neri, Giovanni; Steed, Erin H.; Kidd, Alexa; Isley, William; Showalter, David; Vittone, Janet L.; Konstantinow, Alexander; Ring, Johannes; Meyer, Peter; Wenger, Sharon L.; von Herbay, Axel; Wollina, Uwe; Schuelke, Markus; Huizenga, Carin R.; Leistritz, Dru F.; Martin, George M.; Mian, I. Saira; Oshima, Junko

2007-01-01

The International Registry of Werner syndrome (www.wernersyndrome.org) has been providing molecular diagnosis of the Werner syndrome (WS) for the past decade. The present communication summarizes, from among 99 WS subjects, the spectrum of 50 distinct mutations discovered by our group and by others since the WRN gene (also called RECQL2 or REQ3) was first cloned in 1996; 25 of these have not previously been published. All WRN mutations reported thus far have resulted in the elimination of the nuclear localization signal at the C-terminus of the protein, precluding functional interactions in the nucleus; thus, all could be classified as null mutations. We now report two new mutations in the N-terminus that result in instability of the WRN protein. Clinical data confirm that the most penetrant phenotype is bilateral ocular cataracts. Other cardinal signs were seen in more than 95% of the cases. The median age of death, previously reported to be in the range of 46–48 years, is 54 years. Lymphoblastoid cell lines (LCLs) have been cryopreserved from the majority of our index cases, including material from nuclear pedigrees. These, as well as inducible and complemented hTERT (catalytic subunit of human telomerase) immortalized skin fibroblast cell lines are available to qualified investigators. Published 2006 Wiley-Liss, Inc.† PMID:16673358

Firearms and suicide in US cities.

PubMed

Miller, Matthew; Warren, Molly; Hemenway, David; Azrael, Deborah

2015-04-01

On an average day in the USA more than 100 Americans die by suicide-half use firearms. Suicide rates overall and by firearms are higher, on average, in states where household firearm ownership is more common. In general this means in states where a greater proportion of the population lives in rural areas. The current ecological study focuses on the relation between measures of household firearm prevalence and suicide mortality in urban areas (metropolitan statistical areas and divisions) using survey-based measures of firearm ownership. Suicide rates (1999-2010) for metropolitan statistical areas that are comprised of large US cities come from death certificate records; rates of household firearm ownership come from the 2002 and 2004 Behavioural Risk Factor Surveillance System. Higher rates of firearm ownership are strongly associated with higher rates of overall suicide and firearm suicide, but not with non-firearm suicide. Stratification by gender, age and race did not materially affect the association between firearms and suicide. This study provides evidence consistent with previous case-control work and extends evidence from previous state- and region-level ecological studies that firearms in the home impose suicide risk above and beyond baseline. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

The effects of chronic exposure to common bedding materials on the metabolic rate and overall health of male CD-1 mice.

PubMed

Becker, Corey E; Mathur, Carolyn F; Rehnberg, Bradley G

2010-01-01

Anecdotes and personal Web pages claim that cedar and pine beddings cause respiratory distress in rodents, although no previous research could be found to support these claims. There have, however, been published studies of respiratory distress in cedar and pine mill workers. That research links exposure to wood dust to asthma and to bronchial and alveolar damage in humans. This study looks at the effects of 3 types of bedding (CareFRESH Original, cedar, and pine) on the growth, food intake, oxygen consumption, IgE antibody concentrations, and general appearance and behavior in male CD-1 mice. Mice who were housed on these beddings for approximately 4 months did not show significant differences in any of these variables. This suggests that these 3 materials provide equally healthy substrates for long-term rearing of mice and possibly other rodents.

Realization of MEMS-IC Vertical Integration Utilizing Smart Bumpless Bonding

NASA Astrophysics Data System (ADS)

Shiozaki, Masayoshi; Moriguchi, Makoto; Sasaki, Sho; Oba, Masatoshi

This paper reports fundamental technologies, properties, and new experimental results of SBB (Smart Bumpless Bonding) to realize MEMS-IC vertical integration. Although conventional bonding technologies have had difficulties integrating MEMS and its processing circuit because of their rough bonding surfaces, fragile structures, and thermal restriction, SBB technology realized the vertical integration without thermal treatment, any adhesive materials including bumps, and chemical mechanical polishing. The SBB technology bonds sealing parts for vacuum sealing and electrodes for electrical connection simultaneously as published in previous experimental study. The plasma CVD SiO2 is utilized to realize vacuum sealing as sealing material. And Au projection studs are formed on each electrode and connected electrically between two wafers by compressive plastic deformation and surface activation. In this paper, new experimental results including vacuum sealing properties, electrical improvement, IC bonding results on the described fundamental concept and properties are reported.

Preliminary Geologic Map of the Buxton 7.5' Quadrangle, Washington County, Oregon

USGS Publications Warehouse

Dinterman, Philip A.; Duvall, Alison R.

2009-01-01

This map, compiled from previously published and unpublished data, and new mapping by the authors, represents the general distribution of bedrock and surficial deposits of the Buxton 7.5-minute quadrangle. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The scale of the source maps limits the spatial resolution (scale) of the database to 1:24,000 or smaller. This plot file and accompanying database depict the distribution of geologic materials and structures at a regional (1:24,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains new information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Accelerated Post-Weld Natural Ageing in Ultrasonic Welding Aluminium 6111-T4 Automotive Sheet

NASA Astrophysics Data System (ADS)

Chen, Ying-Chun; Prangnell, Phil

In contrast to previously published reports, it is shown that there is an observable HAZ when ultrasonic spot welding (USW) automotive alloys, like AA6111-T4, the severity of which depends on the welding energy. Immediately after welding, softening is seen relative to the T4 condition, but this is rapidly recovered by natural ageing, which masks the presence of a HAZ, and the weld strength eventually exceeds that of the parent material. This behaviour is caused by dissolution of the solute clusters/GPZs in the T4 sheet, due to the high weld temperatures (> 400 °C), combined with accelerated post-weld natural ageing to a more advanced state than in the parent material. Modelling has demonstrated that this accelerated natural ageing behaviour can be attributed to an excess vacancy concentration generated by the USW process.

Equipment for Nonlinear Photonics Research - Light Control and Image Transmission in Specially-Designed Photonic

DTIC Science & Technology

2014-03-14

photonic graphene”, Nature Material ,13, 57 (2014) ( published online: 10 November 2013 | doi :10.1038/nmat3783) • X. Qi, K.G. Makris, R. El-Ganainy...progress in the proposed research, with several important papers published in leading journals such as Nature Materials , Physics Review Letters...which has been published in Nature Material and Physics Review Letters. Our work was reported in a number of news media as well as featured in PRL

An Overview of the History of Library Science Teaching Materials.

ERIC Educational Resources Information Center

Metzger, Philip A.

1986-01-01

This introduction to, and overview of, history of library science instructional materials covers the Williamson Report, teaching materials from early Columbia days onward, American Library Association book publishing activity, media in curricula and library school publication of syllabi, commercial publishing of textbooks, and periodicals in…

Teaching general practitioners and doctors-in-training to discuss advance care planning: evaluation of a brief multimodality education programme.

PubMed

Detering, Karen; Silvester, William; Corke, Charlie; Milnes, Sharyn; Fullam, Rachael; Lewis, Virginia; Renton, Jodie

2014-09-01

To develop and evaluate an interactive advance care planning (ACP) educational programme for general practitioners and doctors-in-training. Development of training materials was overseen by a committee; informed by literature and previous teaching experience. The evaluation assessed participant confidence, knowledge and attitude toward ACP before and after training. Training provided to metropolitan and rural settings in Victoria, Australia. 148 doctors participated in training. The majority were aged at least 40 years with more than 10 years work experience; 63% had not trained in Australia. The programme included prereading, a DVD, interactive patient e-simulation workshop and a training manual. All educational materials followed an evidence-based stepwise approach to ACP: Introducing the topic, exploring concepts, introducing solutions and summarising the conversation. The primary outcome was the change in doctors' self-reported confidence to undertake ACP conversations. Secondary measures included pretest/post-test scores in patient ACP e-simulation, change in ACP knowledge and attitude, and satisfaction with programme materials. 69 participants completed the preworkshop and postworkshop evaluation. Following education, there was a significant change in self-reported confidence in six of eight items (p=0.008 -0.08). There was a significant improvement (p<0.001) in median scores on the e-simulation (pre 7/80, post 60/80). There were no significant differences observed in ACP knowledge following training, and most participants were supportive of patient autonomy and ACP pretraining. Educational materials were rated highly. A short multimodal interactive education programme improves doctors' confidence with ACP and performance on an ACP patient e-simulation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Why is the Diagnostic and Statistical Manual of Mental Disorders so hard to revise? Path-dependence and "lock-in" in classification.

PubMed

Cooper, Rachel

2015-06-01

The latest edition of the Diagnostic and Statistical Manual of Mental Disorders, the D.S.M.-5, was published in May 2013. In the lead up to publication, radical changes to the classification were anticipated; there was widespread dissatisfaction with the previous edition and it was accepted that a "paradigm shift" might be required. In the end, however, and despite huge efforts at revision, the published D.S.M.-5 differs far less than originally envisaged from its predecessor. This paper considers why it is that revising the D.S.M. has become so difficult. The D.S.M. is such an important classification that this question is worth asking in its own right. The case of the D.S.M. can also serve as a study for considering stasis in classification more broadly; why and how can classifications become resistant to change? I suggest that classifications like the D.S.M. can be thought of as forming part of the infrastructure of science, and have much in common with material infrastructure. In particular, as with material technologies, it is possible for "path dependent" development to cause a sub-optimal classification to become "locked in" and hard to replace. Copyright © 2015 Elsevier Ltd. All rights reserved.

Advancements in internationally accepted standards for radiation processing

NASA Astrophysics Data System (ADS)

Farrar, Harry; Derr, Donald D.; Vehar, David W.

1993-10-01

Three subcommittees of the American Society for Testing and Materials (ASTM) are developing standards on various aspects of radiation processing. Subcommittee E10.01 "Dosimetry for Radiation Processing" has published 9 standards on how to select and calibrate dosimeters, where to put them, how many to use, and how to use individual types of dosimeter systems. The group is also developing standards on how to use gamma, electron beam, and x-ray facilities for radiation processing, and a standard on how to treat dose uncertainties. Efforts are underway to promote inclusion of these standards into procedures now being developed by government agencies and by international groups such as the United Nations' International Consultative Group on Food Irradiation (ICGFI) in order to harmonize regulations and help avoid trade barriers. Subcommittee F10.10 "Food Processing and Packaging" has completed standards on good irradiation practices for meat and poultry and for fresh fruits, and is developing similar standards for the irradiation of seafood and spices. These food-related standards are based on practices previously published by ICGFI. Subcommittee E10.07 on "Radiation Dosimetry for Radiation Effects on Materials and Devices" principally develops standards for determining doses for radiation hardness testing of electronics. Some, including their standards on the Fricke and TLD dosimetry systems are equally useful in other radiation processing applications.

Anatomy of a decision II: Potential effects of changes to Tier I chemical approaches in Canadian Disposal at Sea program sediment assessment protocols.

PubMed

Apitz, Sabine E; Agius, Suzanne

2017-11-01

The effects of possible changes to the Canadian 2-tiered assessment framework for dredged material based on outcomes of the 2006 Contaminated Dredged Material Management Decisions Workshop (CDMMD) are evaluated. Expanding on the "data mining" approach described in a previous paper, which focused solely on chemical lines of evidence, the efficacy of Tier 1 approaches (increases to the number of chemical analytes, use of mean hazard quotients, and the use of a screening bioassay) in predicting toxicity are evaluated. Results suggest value in additional work to evaluate the following areas: 1) further expanding minimum chemical requirements, 2) using more advanced approaches for chemical interpretation, and 3) using a screening-level bioassay (e.g., Canadian solid-phase photoluminescent bacteria test) to determine whether it would complement Tier 1 chemistry as well as or better than the solvent-based Microtox™ test method evaluated in the present study. Integr Environ Assess Manag 2017;13:1072-1085. © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC). © 2017 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Unremitting embolus from cardiac myxoma at circumflex artery trifurcation.

PubMed

Milicevic, Goran; Gavranovic, Zeljka; Cupic, Hrvoje; Cerovec, Dusko; Stipic, Hrvoje; Jukic, Mladen; Letica, Dalibor; Predrijevac, Mladen

2008-06-06

Embolisation of coronary artery from cardiac myxoma is very rare and it is not clear what happens with embolic material inside coronary artery after myocardial infarction. The natural course of myxomatous embolus is important because it determines the mode of surgical intervention. Different options of the course of embolus have been speculated, from spontaneous resorption to growth at artery wall. We report a case of embolisation of the circumflex artery trifurcation from a villous left atrial myxoma. The course of the embolus was displayed by coronary angiography repeated 6 months after myocardial infarction. Unlike the previously published case report, we found the embolus to be unremitting.

High-Pressure Combustion of Binary Fuel Sprays

NASA Technical Reports Server (NTRS)

Williams, F. A.; Dietrich, Daniel L.

2001-01-01

The research addressed here represents a small cooperative project between the US and Japan. The authors have now been involved in this project for a number of years. In previous workshops, the presentation has focused narrowly on the specific most recent accomplishment. If this tradition were followed again, then material about to be published would form the basis of the present write-up. At the present stage, however, it may be of greater interest to step back and take a longer look at the overall character of the project and its history. The recent accomplishments therefore will be covered here only in an abbreviated manner.

[Allergic fungal rhinosinusitis caused by Curvularia sp.].

PubMed

Alvarez, Verónica C; Guelfand, Liliana; Pidone, Juan Carlos; Soloaga, Rolando; Ontivero, Paula; Margari, Alejandra; López Daneri, Gabriela

2011-01-01

Allergic fungal rhinosinusitis is a benign and non-invasive sinusal disease related to a hypersensitivity reaction to fungal antigens. This process can cause tissue edema with chronic inflammatory disturbances of the respiratory mucosa. We present the case of a 17 year-old immunocompetent male, with history of seasonal allergic rhinosinusitis, nasal polyps and previous surgery for mucocele of the frontal sinus. Sticky material was removed in the last surgery that revealed pigmented and septed filaments on direct examination, and yielded Curvularia on Sabouraud dextrose agar. After a course of amphotericin B, treatment was switched to itraconazole, with good tolerance and favorable clinical outcome. Copyright © 2011. Published by Elsevier Espana.

Contact mechanics for coated spheres that includes the transition from weak to strong adhesion

DOE PAGES

Reedy, Earl David

2007-09-01

Recently published results for a rigid spherical indenter contacting a thin, linear elastic coating on a rigid planar substrate have been extended to include the case of two contacting spheres, where each sphere is rigid and coated with a thin, linear elastic material. This is done by using an appropriately chosen effective radius and coating modulus. Finally, the earlier work has also been extended to provide analytical results that span the transition between the previously derived Derjaguin–Müller–Toporov (DMT)-like (work of adhesion/coating-modulus ratio is small) and Johnson–Kendall–Roberts (JKR)-like (work of adhesion/coating-modulus ratio is large) limits.

Complex refractive index measurements for BaF 2 and CaF 2 via single-angle infrared reflectance spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly-Gorham, Molly Rose K.; DeVetter, Brent M.; Brauer, Carolyn S.

We have re-investigated the optical constants n and k for the homologous series of inorganic salts barium fluoride (BaF2) and calcium fluoride (CaF2) using a single-angle near-normal incidence reflectance device in combination with a calibrated Fourier transform infrared (FTIR) spectrometer. Our results are in good qualitative agreement with most previous works. However, certain features of the previously published data near the reststrahlen band exhibit distinct differences in spectral characteristics. Notably, our measurements of BaF2 do not include a spectral feature in the ~250 cm-1 reststrahlen band that was previously published. Additionally, CaF2 exhibits a distinct wavelength shift relative to themore » model derived from previously published data. We confirmed our results with recently published works that use significantly more modern instrumentation and data reduction techniques« less

Romanian-Language Teaching: A Century of Pedagogical Materials Published Outside Romania.

ERIC Educational Resources Information Center

Carlton, Charles M.

1984-01-01

Reviews works published outside Romania for the purpose of the acquisition of the language by nonnatives and also a small number of works published in Romania but widely circulated in the West. Rates the material according to categories such as history and culture, audience, academic calendar, sequencing, magnitude, esthetics, and genre. (SED)

The Influence of Scientific Research and Evaluation on Publishing Educational Curriculum

ERIC Educational Resources Information Center

Baughman, Marcy

2008-01-01

Prior to the No Child Left Behind (NCLB) Act, scientific research to support development of curriculum materials or to demonstrate curricular efficacy was not required. NCLB transformed the development and publishing process for K-12 educational materials by prompting publishers to increase funding for experimentally based research on educational…

RR Lyrae variables in M33: two new fields and an analysis of the galaxy's population

NASA Astrophysics Data System (ADS)

Tanakul, Nahathai; Yang, Soung-Chul; Sarajedini, Ata

2017-06-01

We present a re-analysis of M33 RR Lyrae variables in four different fields: two inner disc fields and two outer disc fields. These are located at 8.5, 8.7, 36 and 46 arcmin from the centre of M33, respectively. We identify 48 new RR Lyrae variable stars and refine the light-curve properties of 51 previously identified variables. From the light curves, we calculate reddenings and metallicities for each star. Using data in this paper and previously published material, we are able to construct a radial density profile for the RR Lyrae stars in M33. This profile, when plotted in log space, has a slope of ˜-2.0 ± 0.15 which agrees with the radial distribution of halo stars in the Milky Way and M31. This suggests that the majority of M33 RR Lyrae variables observed so far belong to the halo. We also examine the RR Lyrae specific frequency and absolute magnitude relation in M33 and find good agreement with previous studies.

Statistical shear lag model - unraveling the size effect in hierarchical composites.

PubMed

Wei, Xiaoding; Filleter, Tobin; Espinosa, Horacio D

2015-05-01

Numerous experimental and computational studies have established that the hierarchical structures encountered in natural materials, such as the brick-and-mortar structure observed in sea shells, are essential for achieving defect tolerance. Due to this hierarchy, the mechanical properties of natural materials have a different size dependence compared to that of typical engineered materials. This study aimed to explore size effects on the strength of bio-inspired staggered hierarchical composites and to define the influence of the geometry of constituents in their outstanding defect tolerance capability. A statistical shear lag model is derived by extending the classical shear lag model to account for the statistics of the constituents' strength. A general solution emerges from rigorous mathematical derivations, unifying the various empirical formulations for the fundamental link length used in previous statistical models. The model shows that the staggered arrangement of constituents grants composites a unique size effect on mechanical strength in contrast to homogenous continuous materials. The model is applied to hierarchical yarns consisting of double-walled carbon nanotube bundles to assess its predictive capabilities for novel synthetic materials. Interestingly, the model predicts that yarn gauge length does not significantly influence the yarn strength, in close agreement with experimental observations. Copyright © 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Mean glandular dose coefficients (D(g)N) for x-ray spectra used in contemporary breast imaging systems.

PubMed

Nosratieh, Anita; Hernandez, Andrew; Shen, Sam Z; Yaffe, Martin J; Seibert, J Anthony; Boone, John M

2015-09-21

To develop tables of normalized glandular dose coefficients D(g)N for a range of anode-filter combinations and tube voltages used in contemporary breast imaging systems. Previously published mono-energetic D(g)N values were used with various spectra to mathematically compute D(g)N coefficients. The tungsten anode spectra from TASMICS were used; molybdenum and rhodium anode-spectra were generated using MCNPX Monte Carlo code. The spectra were filtered with various thicknesses of Al, Rh, Mo or Cu. An initial half value layer (HVL) calculation was made using the anode and filter material. A range of the HVL values was produced with the addition of small thicknesses of polymethyl methacrylate (PMMA) as a surrogate for the breast compression paddle, to produce a range of HVL values at each tube voltage. Using a spectral weighting method, D(g)N coefficients for the generated spectra were calculated for breast glandular densities of 0%, 12.5%, 25%, 37.5%, 50% and 100% for a range of compressed breast thicknesses from 3 to 8 cm. Eleven tables of normalized glandular dose (D(g)N) coefficients were produced for the following anode/filter combinations: W + 50 μm Ag, W + 500 μm Al, W + 700 μm Al, W + 200 μm Cu, W + 300 μm Cu, W + 50 μm Rh, Mo + 400 μm Cu, Mo + 30 μm Mo, Mo + 25 μm Rh, Rh + 400 μm Cu and Rh + 25 μm Rh. Where possible, these results were compared to previously published D(g)N values and were found to be on average less than 2% different than previously reported values.Over 200 pages of D(g)N coefficients were computed for modeled x-ray system spectra that are used in a number of new breast imaging applications. The reported values were found to be in excellent agreement when compared to published values.

Mean Glandular dose coefficients (DgN) for x-ray spectra used in contemporary breast imaging systems

PubMed Central

Nosratieh, Anita; Hernandez, Andrew; Shen, Sam Z.; Yaffe, Martin J.; Seibert, J. Anthony; Boone, John M.

2015-01-01

Purpose To develop tables of normalized glandular dose coefficients DgN for a range of anode–filter combinations and tube voltages used in contemporary breast imaging systems. Methods Previously published mono-energetic DgN values were used with various spectra to mathematically compute DgN coefficients. The tungsten anode spectra from TASMICS were used; Molybdenum and Rhodium anode-spectra were generated using MCNPx Monte Carlo code. The spectra were filtered with various thicknesses of Al, Rh, Mo or Cu. An initial HVL calculation was made using the anode and filter material. A range of the HVL values was produced with the addition of small thicknesses of polymethyl methacrylate (PMMA) as a surrogate for the breast compression paddle, to produce a range of HVL values at each tube voltage. Using a spectral weighting method, DgN coefficients for the generated spectra were calculated for breast glandular densities of 0%, 12.5%, 25%, 37.5%, 50% and 100% for a range of compressed breast thicknesses from 3 to 8 cm. Results Eleven tables of normalized glandular dose (DgN) coefficients were produced for the following anode/filter combinations: W + 50 μm Ag, W + 500 μm Al, W + 700 μm Al, W + 200 μm Cu, W + 300 μm Cu, W + 50 μm Rh, Mo + 400 μm Cu, Mo + 30 μm Mo, Mo + 25 μm Rh, Rh + 400 μm Cu and Rh + 25 μm Rh. Where possible, these results were compared to previously published DgN values and were found to be on average less than 2% different than previously reported values. Conclusion Over 200-pages of DgN coefficients were computed for modeled x-ray system spectra that are used in a number of new breast imaging applications. The reported values were found to be in excellent agreement when compared to published values. PMID:26348995

Book review: The Wilderness Debate Rages On: Continuing the Great New Wilderness Debate

Treesearch

Peter Landres

2009-01-01

The Wilderness Debate Rages On is a collection of mostly previously published papers about the meaning, value, and role of wilderness and continues the discussion that was propelled by the editors' previous book The Great New Wilderness Debate (also a collection of papers) published in 1998. The editors state that this sequel to their previous book is mandated...

SAW parameters on Y-cut langasite structured materials.

PubMed

Puccio, Derek; Malocha, Donald C; Saldanha, Nancy; da Cunha, Mauricio Pereira

2007-09-01

This paper presents results and investigations of several new, man-made piezoelectric single crystal, Czochralski-grown substrate materials for surface acoustic waves (SAW) applications. These materials, langanite (LGN), langatate (LGT), Sr3TaGa3Si2O14 (STGS), Sr3NbGa3Si2O14 (SNGS), Ca3TaGa3Si2O14 (CTGS), and Ca3NbGa3Si2O14 (CNGS), have the same structure as langasite (LGS) and are of the same crystal class as quartz. These compounds are denser than quartz, resulting in lower phase velocities. They also have higher coupling. Unlike quartz and lithium niobate, there is no degradation of material properties below the material melting points resulting in the possibility of extreme high-temperature operation (> 1000 degrees C). This paper gives a summary of extracted SAW material parameters for various propagation angles on Y-cut substrates of the six materials. Parameters included are electromechanical coupling, phase velocity, transducer capacitance, metal strip reflectivity, and temperature coefficient of frequency. Using previously published fundamental material constants, extracted parameters are compared with predictions for LGT and LGN. In addition, power flow angle and fractional frequency curvature data are reported for propagation angles on CTGS and CNGS Y-cut substrates that exhibit temperature compensation near room temperature. Detailed descriptions of the SAW parameter extraction techniques are given. A discussion of the results is provided, including a comparison of extracted parameters and an overview of possible SAW applications.

Energy Efficient Graphene Based High Performance Capacitors.

PubMed

Bae, Joonwon; Kwon, Oh Seok; Lee, Chang-Soo

2017-07-10

Graphene (GRP) is an interesting class of nano-structured electronic materials for various cutting-edge applications. To date, extensive research activities have been performed on the investigation of diverse properties of GRP. The incorporation of this elegant material can be very lucrative in terms of practical applications in energy storage/conversion systems. Among various those systems, high performance electrochemical capacitors (ECs) have become popular due to the recent need for energy efficient and portable devices. Therefore, in this article, the application of GRP for capacitors is described succinctly. In particular, a concise summary on the previous research activities regarding GRP based capacitors is also covered extensively. It was revealed that a lot of secondary materials such as polymers and metal oxides have been introduced to improve the performance. Also, diverse devices have been combined with capacitors for better use. More importantly, recent patents related to the preparation and application of GRP based capacitors are also introduced briefly. This article can provide essential information for future study. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Determination of the platinum - Group elements (PGE) and gold (Au) in manganese nodule reference samples by nickel sulfide fire-assay and Te coprecipitation with ICP-MS

USGS Publications Warehouse

Balaram, V.; Mathur, R.; Banakar, V.K.; Hein, J.R.; Rao, C.R.M.; Gnaneswara, Rao T.; Dasaram, B.

2006-01-01

Platinum group elements (PGE) and Au data in polymetallic oceanic ferromanganese nodule reference samples and crust samples obtained by inductively coupled plasma mass spectrometry (ICP-MS), after separation and pre-concentration by nickel sulfide fire-assay and Te coprecipitation, are presented. By optimizing several critical parameters such as flux composition, matrix matching calibration, etc., best experimental conditions were established to develop a method suitable for routine analysis of manganese nodule samples for PGE and Au. Calibrations were performed using international PGE reference materials, WMG-1 and WMS-1. This improved procedure offers extremely low detection limits in the range of 0.004 to 0.016 ng/g. The results obtained in this study for the reference materials compare well with previously published data wherever available. New PGE data arc also provided on some international manganese nodule reference materials. The analytical methodology described here can be used for the routine analysis of manganese nodule and crust samples in marine geochemical studies.

Food for thought: Sub-fossil and fossil chelonian remains from Franchthi Cave and Megalopolis confirm a glacial refuge for Emys orbicularis in Peloponnesus (S. Greece)

NASA Astrophysics Data System (ADS)

Vlachos, Evangelos; Delfino, Massimo

2016-10-01

Peloponnesus peninsula (S. Greece) shows a remarkable extant chelonian fauna that has received considerable attention from a molecular and morphological point of view. Here we present new evidence from the fossil and sub-fossil record of two important sites in the area, Franchthi Cave and Megalopolis. The archaeological material from Franchthi Cave (Upper Paleolithic - Neolithic/latest Pleistocene - early Holocene) represents food remains from small game prey of the humans that inhabited the cave. The palaeontological material from Megalopolis (Late Pleistocene) comes from old and new excavations. The studied specimens, combined with information from molecular, climatic and zoological works, provide for the first time direct evidence for the presence of the European pond turtle, Emys orbicularis, in the glacial refuge of South Greece that was hypothesized on the basis of the results of molecular investigations. We also describe other chelonian taxa present in the localities, the Hermann's tortoise Testudo hermanni and the Balkan stripe-necked terrapin Mauremys rivulata, and review previously published chelonian material from Peloponnesus.

Copyright. CET Information Sheet No. 6.

ERIC Educational Resources Information Center

Council for Educational Technology, London (England).

The United Kingdom (UK) is a large producer of published materials and as such has a strong copyright law (the Copyright Act of 1956). The law protects eight categories of materials--literary, dramatic, musical, and artistic works; sound recordings; film; broadcasts; and published editions--but the law varies from one type of material to another.…

Effects of linking a soil-water-balance model with a groundwater-flow model

USGS Publications Warehouse

Stanton, Jennifer S.; Ryter, Derek W.; Peterson, Steven M.

2013-01-01

A previously published regional groundwater-flow model in north-central Nebraska was sequentially linked with the recently developed soil-water-balance (SWB) model to analyze effects to groundwater-flow model parameters and calibration results. The linked models provided a more detailed spatial and temporal distribution of simulated recharge based on hydrologic processes, improvement of simulated groundwater-level changes and base flows at specific sites in agricultural areas, and a physically based assessment of the relative magnitude of recharge for grassland, nonirrigated cropland, and irrigated cropland areas. Root-mean-squared (RMS) differences between the simulated and estimated or measured target values for the previously published model and linked models were relatively similar and did not improve for all types of calibration targets. However, without any adjustment to the SWB-generated recharge, the RMS difference between simulated and estimated base-flow target values for the groundwater-flow model was slightly smaller than for the previously published model, possibly indicating that the volume of recharge simulated by the SWB code was closer to actual hydrogeologic conditions than the previously published model provided. Groundwater-level and base-flow hydrographs showed that temporal patterns of simulated groundwater levels and base flows were more accurate for the linked models than for the previously published model at several sites, particularly in agricultural areas.

Fatigue resistance of ultrathin CAD/CAM complete crowns with a simplified cementation process.

PubMed

Magne, Pascal; Carvalho, Adriana O; Bruzi, Greciana; Giannini, Marcelo

2015-10-01

Traditional tooth preparation for complete crowns requires a substantial amount of hard tissue reduction. This is in contrast with the principles of minimally invasive dentistry. An ultrathin complete crown preparation is proposed instead. The purpose of this in vitro study was to assess the fatigue resistance and failure mode of computer-aided design and computer-aided manufacturing (CAD/CAM) ultrathin complete molar crowns placed with self-adhesive cement. Different restorative materials (resin nanoceramic [RNC], feldspathic ceramic [FEL], and lithium disilicate [LD]) were compared. Forty-five extracted molars with a standardized crown preparation were restored with the Cerec 3 CAD/CAM system using FEL, LD, or RNC (n=15). FEL and LD restorations were etched with hydrofluoric acid and silanated. RNC restorations and all preparations were treated with airborne-particle abrasion. All restorations (thickness=0.7 mm) were cemented with RelyX Unicem II Automix cement and submitted to cyclic isometric loading, beginning with a load of 200 N (5000 cycles) and followed by stages of 400, 600, 800, 1000, 1200, and 1400 N at a maximum of 30 000 cycles each. The specimens were loaded until failure or for a maximum of 185 000 cycles. The failure mode was categorized as "catastrophic," "possibly reparable," or "reparable." The groups were compared using life table survival analysis (log rank test at α=.05). Previously published data from the same authors about traditional complete crowns (thickness 1.5 mm) using the same experimental design were included for comparison. All specimens survived the fatigue test until the 600 N step. RNC, LD, and FEL failed at an average load of 1014 N (1 survival), 1123 N (2 survivals), and 987 N (no survivals), and no difference in survival rate was found. No catastrophic failures were reported after the fatigue test. Comparison with previously published data showed that 1.5-mm thick complete crowns demonstrated higher survival rates than the ultrathin restorations, independent of the material. The fatigue resistance of ultrathin complete molar crowns (placed with a simplified cementation process) made of RNC, LD, and FEL was not significantly different. All materials survived the normal range of masticatory forces. All failures were re-restorable. Regular crowns of 1.5 to 2.0 mm thickness may present higher survival rates than ultrathin ones. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Quercetin-imprinted chromatographic sorbents revisited: optimization of synthesis and rebinding protocols for application to natural resources.

PubMed

Pardo, Antonelle; Mespouille, Laetitia; Blankert, Bertrand; Trouillas, Patrick; Surin, Mathieu; Dubois, Philippe; Duez, Pierre

2014-10-17

Molecularly imprinted polymers (MIPs) based on quercetin and synthesized by either bulk, precipitation or suspension polymerization were characterized in terms of size and shape by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). After a study of rebinding protocols, the optimal materials were evaluated as sorbents for solid-phase extraction (SPE) and high-performance liquid chromatography (HPLC) to confirm the presence of imprinted cavities and to assess their selectivity. Besides quercetin, other structurally related natural compounds, naringenin, daidzein and curcumin, were employed for selectivity tests of MIPs. Although rebinding protocols previously described for such MIPs are typically based on binding, washing and eluting methanol-based solutions, we show that this highly polar solvent leads to weak specific interactions (imprinting factor<1) and poor sorbent properties, most probably because of hydrogen-bonding interferences between the MIP and MeOH. Similar experiments performed in tetrahydrofuran yield to much more improved properties (imprinting factor>2.4). This calls for reviewing most of previously published data on quercetin-MIPs; in proper binding conditions, published MIPs may prove more performing than initially assessed. As expected, tested MIPs exhibited the highest selective rebinding towards quercetin template (imprinting effect, quercetin, 3.41; naringenin, 1.54; daidzein, 1.38; curcumin, 1.67); the differences in selectivity between quercetin analogues were explained by the ligand geometries and H-bonding patterns obtained from quantum-chemical calculations. The evaluation of MIPs under identical analytical conditions allowed investigating the effect of the production method on chromatographic performances. The MIPs in bead materials (for quercetin, peak width, 0.69; number of theoretical plates, 143; symmetry factor, 2.22) provided a significant improvement in chromatographic efficiency over the bulk materials (for quercetin, peak width, 1.25; number of theoretical plates, 115; symmetry factor, 2.92). Using the quercetin-beaded MIP as SPE sorbent, quercetin was selectively extracted from Allium cepa L. extract. The MIP developed in this work therefore appears highly promising for the enrichment and determination of quercetin in natural products. Copyright © 2014 Elsevier B.V. All rights reserved.

Terrigenous helium in deep-sea sediments

NASA Astrophysics Data System (ADS)

Marcantonio, Franco; Higgins, Sean; Anderson, Robert F.; Stute, Martin; Schlosser, Peter; Rasbury, E. Troy

1998-05-01

We have measured the isotope ratios of helium contained in various terrigenous materials that contribute to deep-sea sediments. These materials include ice-rafted debris from the North Atlantic, Chinese Loess, and sediment collected at or near the mouths of three large rivers: the Amazon, the Ganges, and the Yangtze. We observe terrigenous 3He/ 4He ratios that vary from 1.8 × 10 -9 to 4.6 × 10 -7, i.e., values that are higher than the theoretically-derived range of 10 -9 to 10 -8. Atlantic and Pacific deep-sea sediment 3He/ 4He ratios can be explained by mixing of helium from similar extraterrestrial but different terrigenous sources. Terrigenous sources for North Atlantic and North Pacific sediments are characterized by 3He and 4He contents that are higher, and 3He/ 4He ratios that are lower, than those for central and eastern equatorial Pacific sediments. This is consistent with the supply to the North Atlantic and North Pacific oceans of older cratonic continental material that contains high amounts of in situ-produced nucleogenic and radiogenic helium. Terrigenous material transported to central and eastern equatorial Pacific sediments contains lower amounts of 3He and 4He and higher 3He/ 4He ratios, indicative of supply from a more juvenile Andean source. In the equatorial Atlantic (core V31-135), we have used previously-published 230Th data to determine an extraterrestrial 3He flux of (1.16 ± 0.15) × 10 -12 cm 3STP · cm -2 · ka -1, within error of that previously determined in sediments from the equatorial Pacific Ocean ([0.78 ± 0.29] × 10 -13 cm 3STP · cm -2 · ka -1; Marcantonio et al., 1996).

Intrusive dike complexes, cumulate cores, and the extrusive growth of Hawaiian volcanoes

USGS Publications Warehouse

Flinders, Ashton F.; Ito, Garrett; Garcia, Michael O.; Sinton, John M.; Kauahikaua, Jim; Taylor, Brian

2013-01-01

The Hawaiian Islands are the most geologically studied hot-spot islands in the world yet surprisingly, the only large-scale compilation of marine and land gravity data is more than 45 years old. Early surveys served as reconnaissance studies only, and detailed analyses of the crustal-density structure have been limited. Here we present a new chain-wide gravity compilation that incorporates historical island surveys, recently published work on the islands of Hawai‘i, Kaua‘i, and Ni‘ihau, and >122,000 km of newly compiled marine gravity data. Positive residual gravity anomalies reflect dense intrusive bodies, allowing us to locate current and former volcanic centers, major rift zones, and a previously suggested volcano on Ka‘ena Ridge. By inverting the residual gravity data, we generate a 3-D view of the dense, intrusive complexes and olivine-rich cumulate cores within individual volcanoes and rift zones. We find that the Hāna and Ka‘ena ridges are underlain by particularly high-density intrusive material (>2.85 g/cm3) not observed beneath other Hawaiian rift zones. Contrary to previous estimates, volcanoes along the chain are shown to be composed of a small proportion of intrusive material (<30% by volume), implying that the islands are predominately built extrusively.

Title list of documents made publicly available July 1-31, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This monthly publication describes the information received and published by the U.S. Nuclear Regulatory Commission (US NRC). This includes information on docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and non-docketed material published by the US NRC pertinent to it`s role as a regulatory agency.

Biotransport of transuranium radionuclides in dairy animals: a data summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutton, W.W.; Patzer, R.G.; Potter, G.D.

In recent years, the Environmental Monitoring Systems Laboratory at Las Vegas, Nevada (EMSL-LV) has carried out a series of studies on the biological transport of plutonium, americium, neptunium, and curium in lactating dairy cattle and goats. Ruminants in general and cattle in particular form one of the more important links in the human food chain. Milk and milk products constitute a significant portion of the human diet, especially for children. This summary consists of a compilation of detailed data from a series of previously published studies. It has been prepared to present the data from all of these studies inmore » a single source to be used by regulatory agencies in their transport modeling and hazard assessment activities. Selected source materials for the data presented in this document have been published either in the Proceedings of the Nevada Applied Ecology Group (NAEG) or as EMSL-LV publications and are listed in the References section.« less

Measurement of the infrared optical constants for spectral modeling: n and k values for (NH4)2SO4 via single-angle reflectance and ellipsometric methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blake, Thomas A.; Brauer, Carolyn S.; Kelly-Gorham, Molly Rose K.

The optical constants n and k can be used to model infrared spectra, including refraction, absorption, reflectance, and emissivity, but obtaining reliable values for solid materials (pure or otherwise) presents a challenge: In the past, the best results for n and k have been obtained from bulk, homogeneous materials, free of defects. That is, materials where the Fresnel equations are operant since there is no light scattering. Since it is often not possible to obtain a pure macroscopic (crystalline) material, it may be possible to press the material into a (uniform, void-free) disk. We have recently been able to domore » this with ammonium sulfate powder and then measured the n & k values via two independent methods: 1) Ellipsometry - which measures the changes in amplitude and phase of light reflected from the material of interest as a function of wavelength and angle of incidence, and 2) Single angle specular reflectance with an FT spectrometer using a specular reflectance device within an FT instrument which measures the change in amplitude of light reflected from the material of interest as a function of wavelength and angle of incidence over a wide wavelength range. The quality of the derived n & k values was tested by generating the reflectance spectra of the pellet and comparing to the calculated to measured reflectance spectra of the pure material which has been previously published. The comparison to literature values showed good accuracy and good agreement, indicating promise to measure other materials by such methods.« less

Roll Compaction/Dry Granulation of Dibasic Calcium Phosphate Anhydrous-Does the Morphology of the Raw Material Influence the Tabletability of Dry Granules?

PubMed

Grote, Simon; Kleinebudde, Peter

2018-04-01

The influence of raw material particle morphology on the tabletabilty of dry granules was investigated. Therefore, dibasic calcium phosphate anhydrous was used as a model material. One milled grade, 2 agglomerated grades with different porosities, and a functionalized structure, that is, an agglomerate formed by very small primary particles, were included. Particle size, density, and specific surface area of raw materials were measured. The starting materials and 2 fractions of dry granules were compressed to tablets. The tabletability of granules was compared to that of the powders and the influence of specific compaction force, granule size, and lubrication on tablet tensile strength was evaluated. All materials showed a loss in tabletability induced by a previous compaction step but to a varying extent. Only in case of the functionalized calcium phosphate morphology, this effect depended on the specific compaction force. In contrast to the other materials, the tabletability of functionalized calcium phosphate was influenced by the granule size. This effect was not related to an overlubrication as internal and external lubrication resulted in similar tensile strengths. A clear influence of the particle morphology on tablet strength was demonstrated by the study. The functionalized structure showed aspects of a more plastic deformation behavior. The functionalized dibasic calcium phosphate and the more porous agglomerate performed as potential filler/binder in the field of roll compaction/dry granulation. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Processing and Material Characterization of Continuous Basalt Fiber Reinforced Ceramic Matrix Composites Using Polymer Derived Ceramics.

NASA Technical Reports Server (NTRS)

Cox, Sarah B.

2014-01-01

The need for high performance vehicles in the aerospace industry requires materials which can withstand high loads and high temperatures. New developments in launch pads and infrastructure must also be made to handle this intense environment with lightweight, reusable, structural materials. By using more functional materials, better performance can be seen in the launch environment, and launch vehicle designs which have not been previously used can be considered. The development of high temperature structural composite materials has been very limited due to the high cost of the materials and the processing needed. Polymer matrix composites can be used for temperatures up to 260C. Ceramics can take much higher temperatures, but they are difficult to produce and form in bulk volumes. Polymer Derived Ceramics (PDCs) begin as a polymer matrix, allowing a shape to be formed and cured and then to be pyrolized in order to obtain a ceramic with the associated thermal and mechanical properties. The use of basalt in structural and high temperature applications has been under development for over 50 years, yet there has been little published research on the incorporation of basalt fibers as a reinforcement in the composites. In this study, continuous basalt fiber reinforced PDCs have been fabricated and tested for the applicability of this composite system as a high temperature structural composite material. The oxyacetylene torch testing and three point bend testing have been performed on test panels and the test results are presented.

18 CFR 154.302 - Previously submitted material.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Previously submitted material. 154.302 Section 154.302 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... Filed With Changes § 154.302 Previously submitted material. (a) If all, or any portion, of the...

18 CFR 154.302 - Previously submitted material.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Previously submitted material. 154.302 Section 154.302 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... Filed With Changes § 154.302 Previously submitted material. (a) If all, or any portion, of the...

18 CFR 154.302 - Previously submitted material.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Previously submitted material. 154.302 Section 154.302 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... Filed With Changes § 154.302 Previously submitted material. (a) If all, or any portion, of the...

18 CFR 154.302 - Previously submitted material.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Previously submitted material. 154.302 Section 154.302 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... Filed With Changes § 154.302 Previously submitted material. (a) If all, or any portion, of the...

15 CFR 10.10 - Review of published standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Review of published standards. 10.10... DEVELOPMENT OF VOLUNTARY PRODUCT STANDARDS § 10.10 Review of published standards. (a) Each standard published... considered until a replacement standard is published. (b) Each standard published under these or previous...

A general panel sizing computer code and its application to composite structural panels

NASA Technical Reports Server (NTRS)

Anderson, M. S.; Stroud, W. J.

1978-01-01

A computer code for obtaining the dimensions of optimum (least mass) stiffened composite structural panels is described. The procedure, which is based on nonlinear mathematical programming and a rigorous buckling analysis, is applicable to general cross sections under general loading conditions causing buckling. A simplified method of accounting for bow-type imperfections is also included. Design studies in the form of structural efficiency charts for axial compression loading are made with the code for blade and hat stiffened panels. The effects on panel mass of imperfections, material strength limitations, and panel stiffness requirements are also examined. Comparisons with previously published experimental data show that accounting for imperfections improves correlation between theory and experiment.

Time-resolved gamma spectroscopy of single events

NASA Astrophysics Data System (ADS)

Wolszczak, W.; Dorenbos, P.

2018-04-01

In this article we present a method of characterizing scintillating materials by digitization of each individual scintillation pulse followed by digital signal processing. With this technique it is possible to measure the pulse shape and the energy of an absorbed gamma photon on an event-by-event basis. In contrast to time-correlated single photon counting technique, the digital approach provides a faster measurement, an active noise suppression, and enables characterization of scintillation pulses simultaneously in two domains: time and energy. We applied this method to study the pulse shape change of a CsI(Tl) scintillator with energy of gamma excitation. We confirmed previously published results and revealed new details of the phenomenon.

EFL Published Materials: An Evaluation of English Textbooks for Junior High School in Indonesia

ERIC Educational Resources Information Center

Hanifa, Rizaldy

2018-01-01

The use of EFL published materials like textbooks are becoming more widespread as they can bring easiness in the classroom by providing teachers with guidelines comprised of syllabus, methodologies, as well as materials for teaching and learning. However, choosing a suitable textbook for their teaching situation is deemed to be one of the most…

In vivo degradation in modern orthopaedic UHMWPE bearings and structural characterization of a novel alternative UHMWPE material

NASA Astrophysics Data System (ADS)

Reinitz, Steven D.

Ultra-high molecular weight polyethylene (UHMWPE) remains the most common bearing material for total joint arthroplasty. Advances in radiation cross-linking and other post-consolidation treatments have led to a rapid differentiation of polyethylene products on the market, with more than twenty unique materials currently being sold by the five largest orthopaedic manufacturers alone. Through oxidation, cross-link density, and free radical measurements, this work demonstrates for the first time that in vivo material degradation is occurring in cross-linked UHMWPE materials. Based on the rate of the reaction in certain materials, it is concluded that oxidative degradation may compromise the mechanical properties of the bearings in as few as ten years, potentially leading to early clinical failure of the devices. Using the knowledge gained from this work as well as previously published observations about UHMWPE oxidation, a two-mechanism model of oxidation is proposed that offers an explanation for the observed in vivo changes. From this model it is concluded that oxidative degradation is in part the result of in vivo chemical species. The two-mechanism model of oxidation suggests that different processing techniques for UHMWPE may reduce the risk of oxidative degradation. It is concluded that by avoiding any radiation cross-linking step, Equal Channel Angular Processing (ECAP) can produce UHMWPE materials with a reduced risk for in vivo oxidation while at the same time offering superior mechanical properties compared to commercially available UHMWPE materials, as well as similar wear behavior. Using dynamic mechanical analysis, the entanglement density in ECAP materials is quantified, and is related back to the ECAP processing parameters. The relationship between entanglement density and resultant material properties is established. The results will allow informed processing parameter selection for producing optimized materials for orthopaedics and other applications.

Navigational and vessel inspection circular No. 5-86. Voluntary standards for US uninspected commercial fishing vessels. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1986-08-18

The vessel standards program, which this NVIC addresses, originally consisted of a series of five NVICs; Stability (5-85), Radio and Shipboard Navigation Equipment (6-85), Fire Safety Measures (7-85), Lifesaving Equipment and Protection of the Crew (8-85), and Hull, Machinery, and Electrical Installations (9-85). Many of these NVICs contained specific operational and educational material for fishermen which could be used before the `Vessel Safety Manual` was published; therefore, some material previously contained in any one of the NVICs has been moved to the manual, although some overlap still exists. Since input from the fishing industry and other interested parties was essential,more » the authors published NVICs 5-85 thru 9-85 as proposed standards and distributed them to over 230 individuals, groups and organizations throuoghout the U.S. who have an interest in fishing vessel safety. These groups included safety consultants, marine surveyors, naval architects, insurance underwriters, fishing vessel owners` associations, boat builders, fisheries unions, personnel associated with the National Oceanic and Atmospheric Administration Sea Grant program, and the National Marine Fisheries Service. Several sent detailed comments; all expressed a favorable reaction to the standards. This report is a consolidation of NVICs 5-85 thru 9-85 taking into account the comments and recommendations received. For continuity, certain regulatory requirements (although not voluntary) have been included where appropriate.« less

A Simple and Novel Method to Attain Retrograde Ureteral Access after Previous Cohen Cross-Trigonal Ureteral Reimplantation

PubMed Central

Adam, Ahmed

2017-01-01

Objective To describe a simple, novel method to achieve ureteric access in the Cohen crossed reimplanted ureter, which will allow retrograde working access via the conventional transurethral method. Materials and Methods Under cystoscopic vision, suprapubic needle puncture was performed. The needle was directed (bevel facing) towards the desired ureteric orifice (UO). A guidewire (with a floppy-tip) was then inserted into the suprapubic needle passing into the bladder, and then easily passed into the crossed-reimplanted UO. The distal end of the guidewire was then removed through the urethra with cystoscopic grasping forceps. The straightened ureter then easily facilitated ureteroscopy access, retrograde pyelogram studies, and JJ stent insertion in a conventional transurethral method. Results The UO and ureter were aligned in a more conventional orthotopic course, to allow for conventional transurethral working access. Conclusion A novel method to access the Cohen crossed reimplanted ureter was described. All previously published methods of accessing the crossed ureter were critically appraised. PMID:29463976

Fostering Integrity in Research

NASA Astrophysics Data System (ADS)

McNutt, M. K.

2017-12-01

The responsible conduct of research requires that all involved in the research enterprise - researchers, sponsors, reviewers, publishers, and communicators - adhere to a set of integrity principles to protect the public's investment. Given the increasing complexity and globalization of the research enterprise, the National Academies recently re-examined and updated its integrity recommendations for researchers in the report Fostering Integrity in Research, with sponsorship from the National Science Foundation. Major departures from the previous recommendations 25-years earlier are the recognition that practices that were previously classified as merely questionable are indeed detrimental to the responsible conduct of research. Furthermore, the report concludes that there has been insufficient effort to respond to the threats that lapses in research integrity pose to the quality of research products and the reputation of researchers as deserving of the public trust. It recommends the creation of an independent, non-profit entity dedicated to promoting research integrity by serving as a resource and clearing house for expertise, advice, materials, and best practices on fostering research integrity and responding to allegations of research misconduct.

Guidelines for proper care and use of wildlife in field research

USGS Publications Warehouse

Friend, M.; Toweill, D.E.; Borwnell, R.L.; Nettles, V.F.; Davis, D.S.; Foreyt, W.J.

1999-01-01

Public attitudes towards animals continue to change over time. These changes apply to wildlife along with other species, and in recent years, attitudes have been increasingly oriented toward assuring that all species receive proper care whenever human interactions are involved. Guidance regarding the application of euthanasia is provided in the previous chapter. This chapter provides basic guidelines for the proper use of wildlife in field investigations. We believe this previously published information from The Wildlife Society is sufficiently important to include in this field manual. The Wildlife Society has been kind enough to grant permission for this reproduction. The scope of this chapter extends to all wildlife, and the application of this material extends beyond research to all wildlife investigations. This chapter is reproduced, with the addition of illustrations and minor modifications, as it appeared in Research and Management Techniques for Wildlife and Habitats (Bookhout, 1994), and, thus, it deviates from the format for the rest of Volume I.

High Photon-to-Current Conversion in Solar Cells Based on Light-Absorbing Silver Bismuth Iodide.

PubMed

Zhu, Huimin; Pan, Mingao; Johansson, Malin B; Johansson, Erik M J

2017-06-22

Here, a lead-free silver bismuth iodide (AgI/BiI 3 ) with a crystal structure with space group R3‾ m is investigated for use in solar cells. Devices based on the silver bismuth iodide deposited from solution on top of TiO 2 and the conducting polymer poly(3-hexylthiophene-2,5-diyl) (P3HT) as a hole-transport layer are prepared and the photovoltaic performance is very promising with a power conversion efficiency over 2 %, which is higher than the performance of previously reported bismuth-halide materials for solar cells. Photocurrent generation is observed between 350 and 700 nm, and the maximum external quantum efficiency is around 45 %. The results are compared to solar cells based on the previously reported material AgBi 2 I 7 , and we observe a clearly higher performance for the devices with the new silver and bismuth iodides composition and different crystal structure. The X-ray diffraction spectrum of the most efficient silver bismuth iodide material shows a hexagonal crystal structure with space group R3‾ m, and from the light absorption spectrum we obtain an indirect band gap energy of 1.62 eV and a direct band gap energy of 1.85 eV. This report shows the possibility for finding new structures of metal-halides efficient in solar cells and points out new directions for further exploration of lead-free metal-halide solar cells. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

Processing and nanostructure influences on mechanical properties of thermoelectric materials

NASA Astrophysics Data System (ADS)

Schmidt, Robert David

Thermoelectric (TE) materials are materials that can generate an electric current from a thermal gradient, with possible service in recovery of waste heat such as engine exhaust. Significant progress has been made in improving TE conversion efficiency, typically reported according to the figure of merit, ZT, with several recent papers publishing ZT values above 2. Furthermore, cost reductions may be made by the use of lower cost elements such as Mg, Si, Sn, Pb, Se and S in TE materials, while achieving ZT values between 1.3 and 1.8. To be used in a device, the thermoelectric material must be able to withstand the applied thermal and mechanical forces without failure. However, these materials are brittle, with low fracture toughness typically less than 1.5 MPa-m1/2, and often less than 0.5 MPa-m1/2. For comparison, window glass is approximately 0.75 MPa-m1/2. They have been optimized with nanoprecipitates, nanoparticles, doping, alterations in stoichiometry, powder processing and other techniques, all of which may alter the mechanical properties. In this study, the effect of SiC nanoparticle additions in Mg2Si, SnTe and Ag nanoparticle additions in the skutterudite Ba0.3Co 4Sb12 on the elastic moduli, hardness and fracture toughness are measured. Large changes (˜20%) in the elastic moduli in SnTe 1+x as a function of x at 0 and 0.016 are shown. The effect on mechanical properties of doping and precipitates of CdS or ZnS in a PbS or PbSe matrix have been reported. Changes in sintering behavior of the skutterudite with the Ag nanoparticle additions were explored. Possible liquid phase sintering, with associated benefits in lower processing temperature, faster densification and lower cost, has been shown. A technique has been proposed for determining additional liquid phase sintering aids in other TE materials. The effects of porosity, grain size, powder processing method, and sintering method were explored with YbAl3 and Ba0.3Co4Sb 12, with the porosity dependence of the elastic moduli reported. Only one other TE material has the porosity dependence of the elastic moduli previously reported in the literature, lead-antimony-silver-tellurium (LAST), and the effect of different powder processing and sintering methods has never been reported previously on TE materials.

Author-Publisher-Educator Relationships and Curriculum Reform.

ERIC Educational Resources Information Center

McFadden, Charles P.

1992-01-01

Discusses relationships among teachers, curriculum package authors, and publishers. Describes the Atlantic Science Curriculum Project's reform efforts. Recommends that curriculum development projects include: (1) lengthy informal development; (2) combined testing of design and materials; (3) the withholding of contracts until materials are in…

Mid-infrared reflectlance spectra (2.3-22 micions) of sulfur, gold, KBr, MgO, and halon

NASA Technical Reports Server (NTRS)

Nash, D. B.

1986-01-01

Biconical diffuse reflectance spectra in the mid-infrared are presented for powder and other solid forms of sulfur, gold, potassium bromide, magnesium oxide, and halon. Comparisons are made with previously published results of other investigators, and recommendations are made regarding the relative usefulnees of these materials as reflectance standards in the mid-IR. Sulfur has strong intrinsic bands at wavelengths greater than 7 microns that must be taken into account for its use as a reflectance standard. Some sulfur samples have hydrocarbon contaminants and in powder form may have adsorbed water, both of which produce bands in the 3-4-micron region. Potassium bromide has several weak intrinsic bands and is very sensitive to adsorbed water contamination; otherwise it is a good IR reference material. Magnesium oxide and halon have major bands structure and low reflectivity at wavelengths greater than 2.6 microns and thus are unsuitable as reference materials in the mid-IR. Vapor-deposited gold on fine sandpaper (600 grit) is very bright, spectrally flat, and fairly diffuse, so it is the superior material (of those examined) for reflectance reference material throughout the IR. Fine gold powder, on the other hand, is much less bright than evaporated gold, and its reflectivity at wavelengths greater than its particle size is highly sensitive to particle packing density.

Measurements of Young's and shear moduli of rail steel at elevated temperatures.

PubMed

Bao, Yuanye; Zhang, Haifeng; Ahmadi, Mehdi; Karim, Md Afzalul; Felix Wu, H

2014-03-01

The design and modelling of the buckling effect of Continuous Welded Rail (CWR) requires accurate material constants, especially at elevated temperatures. However, such material constants have rarely been found in literature. In this article, the Young's moduli and shear moduli of rail steel at elevated temperatures are determined by a new sonic resonance method developed in our group. A network analyser is used to excite a sample hanged inside a furnace through a simple tweeter type speaker. The vibration signal is picked up by a Polytec OFV-5000 Laser Vibrometer and then transferred back to the network analyser. Resonance frequencies in both the flexural and torsional modes are measured, and the Young's moduli and shear moduli are determined through the measured resonant frequencies. To validate the measured elastic constants, the measurements have been repeated by using the classic sonic resonance method. The comparisons of obtained moduli from the two methods show an excellent consistency of the results. In addition, the material elastic constants measured are validated by an ultrasound test based on a pulse-echo method and compared with previous published results at room temperature. The measured material data provides an invaluable reference for the design of CWR to avoid detrimental buckling failure. Copyright © 2013 Elsevier B.V. All rights reserved.

PREFACE: 4th National Conference on Processing and Characterization of Materials (NCPCM 2014)

NASA Astrophysics Data System (ADS)

2015-02-01

This volume contains selected full length technical papers amongst forty oral presentations made in the 4th National Conference on Processing and Characterization of Materials (NCPCM 2014), NIT Rourkela, Rourkela, Odisha, India, December 5 - 6, 2014. The first conference of the NCPCM series was held at the same place in December 2011. Seeing the enthusiasm of the participants, it was decided to organize such conference in Rourkela every year. The basic idea was to establish a periodical national forum for multi-scale approaches in processing and characterization of materials in the eastern part of India. The conference NCPCM 2014 has successfully carried the tradition of previous conferences; more than fifty participants from twenty different organizations across India have registered. The conference was consisted of six technical sessions of about fifty contributory talks along with three keynote lectures. A metallography contest was also organized during the event. Out of these, thirty four best peer-reviewed contributions are published in this volume of IOP Conference Series: Materials Science and Engineering. We would like to thank all the contributors, members of the organizing committee, session chairs as well as colleagues and students who helped with the preparation of the conference and, particularly, with the preparation of this volume. We convey our heartiest gratitude to the sponsors and advertisers for their contribution.

Furnishing spaceship environment: evaluation of bacterial biofilms on different materials used inside International Space Station.

PubMed

Perrin, Elena; Bacci, Giovanni; Garrelly, Laurent; Canganella, Francesco; Bianconi, Giovanna; Fani, Renato; Mengoni, Alessio

2018-05-08

Performed inside International Space Station (ISS) from 2011 to 2016, VIABLE (eValuatIon And monitoring of microBiofiLms insidE International Space Station) ISS was a long-lasting experiment aimed at evaluating the bacterial contamination on different surface space materials subjected to different pre-treatment, to provide useful information for future space missions. In this work, surfaces samples of the VIABLE ISS experiment were analyzed to determine both the total bacterial load (ATP-metry, qPCR) and the composition of the microbial communities (16S rRNA genes amplicon sequencing). Data obtained showed a low bacterial contamination of all the surfaces, with values in agreement with those allowed inside ISS, and with a taxonomic composition similar to those found in previous studies (Enterobacteriales, Bacillales, Lactobacillales and Actinomycetales). No pre-treatment or material effect were observed on both the bacterial load and the composition of the communities, but for both a slight effect of the position (expose/not expose to air) was observed. In conclusion, under the conditions used for VIABLE ISS, no material or pre-treatment seems to be better than others in terms of quantity and type of bacterial contamination. Copyright © 2018 Institut Pasteur. Published by Elsevier Masson SAS. All rights reserved.

Osteoarthritis alters the patellar bones subchondral trabecular architecture.

PubMed

Hoechel, Sebastian; Deyhle, Hans; Toranelli, Mireille; Müller-Gerbl, Magdalena

2017-09-01

Following the principles of "morphology reveals biomechanics," the cartilage-osseous interface and the trabecular network show defined adaptation in response to physiological loading. In the case of a compromised relationship, the ability to support the load diminishes and the onset of osteoarthritis (OA) may arise. To describe and quantify the changes within the subchondral bone plate (SBP) and trabecular architecture, 10 human OA patellae were investigated by CT and micro-CT. The results are presented in comparison to a previously published dataset of 10 non-OA patellae which were evaluated in the same manner. The analyzed OA samples showed no distinctive mineralization pattern in regards to the physiological biomechanics, but a highly irregular disseminated distribution. In addition, no regularity in bone distribution and architecture across the trabecular network was found. We observed a decrease of material as the bone volume and trabecular thickness/number were significantly reduced. In comparison to non-OA samples, greatest differences for all parameters were found within the first mm of trabecular bone. The differences decreased toward the fifth mm in a logarithmic manner. The interpretation of the logarithmic relation leads to the conclusion that the main impact of OA on bony structures is located beneath the SBP and lessens with depth. In addition to the clear difference in material with approximately 12% less bone volume in the first mm in OA patellae, the architectural arrangement is more rod-like and isotropic, accounting for an architectural decrease in stability and support. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:1982-1989, 2017. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

Review of the physical and mechanical properties and potential applications of the B2 compound NiAl: Unabridged version of a paper published in International materials review

NASA Technical Reports Server (NTRS)

Noebe, Ronald D.; Bowman, Randy R.; Nathal, Michael V.

1992-01-01

Considerable work has been performed on NiAl over the last three decades, with an extremely rapid growth in research on this intermetallic occurring in the last few years due to recent interest in this material for electronic and high temperature structural applications. However, many physical properties and the controlling fracture and deformation mechanisms over certain temperature regimes are still in question. Part of this problem lies in the incomplete characterization of many of the alloys previously investigated. Fragmentary data on processing conditions, chemistry, microstructure and the apparent difficulty in accurately measuring composition has made direct comparison between individual studies sometimes tenuous. Therefore, the purpose of this review is to summarize all available mechanical and pertinent physical properties on NiAl, stressing the most recent investigations, in an attempt to understand the behavior of NiAl and its alloys over a broad temperature range.

Optimization of a wet microalgal lipid extraction procedure for improved lipid recovery for biofuel and bioproduct production.

PubMed

Sathish, Ashik; Marlar, Tyler; Sims, Ronald C

2015-10-01

Methods to convert microalgal biomass to bio based fuels and chemicals are limited by several processing and economic hurdles. Research conducted in this study modified/optimized a previously published procedure capable of extracting transesterifiable lipids from wet algal biomass. This optimization resulted in the extraction of 77% of the total transesterifiable lipids, while reducing the amount of materials and temperature required in the procedure. In addition, characterization of side streams generated demonstrated that: (1) the C/N ratio of the residual biomass or lipid extracted (LE) biomass increased to 54.6 versus 10.1 for the original biomass, (2) the aqueous phase generated contains nitrogen, phosphorous, and carbon, and (3) the solid precipitate phase was composed of up to 11.2 wt% nitrogen (70% protein). The ability to isolate algal lipids and the possibility of utilizing generated side streams as products and/or feedstock material for downstream processes helps promote the algal biorefinery concept. Copyright © 2015 Elsevier Ltd. All rights reserved.

Summary: Update to ASTM guide E 1523 to charge control and charge referencing techniques in x-ray photoelectron spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baer, D.R.

2005-05-01

An updated version of the American Society for Testing and Materials (ASTM) guide E 1523 to the methods to charge control and charge referencing techniques in x-ray photoelectron spectroscopy has been released by ASTM [Annual Book of ASTM Standards Surface Analysis (American Society for Testing and Materials, West Conshohocken, PA, 2004), Vol. 03.06]. The guide is meant to acquaint x-ray photoelectron spectroscopy (XPS) users with the various charge control and charge referencing techniques that are and have been used in the acquisition and interpretation of XPS data from surfaces of insulating specimens. The current guide has been expanded to includemore » new references as well as recommendations for reporting information on charge control and charge referencing. The previous version of the document had been published in 1997 [D. R. Baer and K. D. Bomben, J. Vac. Sci. Technol. A 16, 754 (1998)].« less

Fatigue performance of additively manufactured meta-biomaterials: The effects of topology and material type.

PubMed

Ahmadi, S M; Hedayati, R; Li, Y; Lietaert, K; Tümer, N; Fatemi, A; Rans, C D; Pouran, B; Weinans, H; Zadpoor, A A

2018-01-01

Additive manufacturing (AM) techniques enable fabrication of bone-mimicking meta-biomaterials with unprecedented combinations of topological, mechanical, and mass transport properties. The mechanical performance of AM meta-biomaterials is a direct function of their topological design. It is, however, not clear to what extent the material type is important in determining the fatigue behavior of such biomaterials. We therefore aimed to determine the isolated and modulated effects of topological design and material type on the fatigue response of metallic meta-biomaterials fabricated with selective laser melting. Towards that end, we designed and additively manufactured Co-Cr meta-biomaterials with three types of repeating unit cells and three to four porosities per type of repeating unit cell. The AM meta-biomaterials were then mechanically tested to obtain their normalized S-N curves. The obtained S-N curves of Co-Cr meta-biomaterials were compared to those of meta-biomaterials with same topological designs but made from other materials, i.e. Ti-6Al-4V, tantalum, and pure titanium, available from our previous studies. We found the material type to be far more important than the topological design in determining the normalized fatigue strength of our AM metallic meta-biomaterials. This is the opposite of what we have found for the quasi-static mechanical properties of the same meta-biomaterials. The effects of material type, manufacturing imperfections, and topological design were different in the high and low cycle fatigue regions. That is likely because the cyclic response of meta-biomaterials depends not only on the static and fatigue strengths of the bulk material but also on other factors that may include strut roughness, distribution of the micro-pores created inside the struts during the AM process, and plasticity. Meta-biomaterials are a special class of metamaterials with unusual or unprecedented combinations of mechanical, physical (e.g. mass transport), and biological properties. Topologically complex and additively manufactured meta-biomaterials have been shown to improve bone regeneration and osseointegration. The mechanical properties of such biomaterials are directly related to their topological design and material type. However, previous studies of such biomaterials have largely neglected the effects of material type, instead focusing on topological design. We show here that neglecting the effects of material type is unjustified. We studied the isolated and combined effects of topological design and material type on the normalized S-N curves of metallic bone-mimicking biomaterials and found them to be more strongly dependent on the material type than topological design. Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Inelastic neutron scattering spectrum of cyclotrimethylenetrinitramine: a comparison with solid-state electronic structure calculations.

PubMed

Ciezak, Jennifer A; Trevino, S F

2006-04-20

Solid-state geometry optimizations and corresponding normal-mode analysis of the widely used energetic material cyclotrimethylenetrinitramine (RDX) were performed using density functional theory with both the generalized gradient approximation (BLYP and BP functionals) and the local density approximation (PWC and VWN functionals). The structural results were found to be in good agreement with experimental neutron diffraction data and previously reported calculations based on the isolated-molecule approximation. The vibrational inelastic neutron scattering (INS) spectrum of polycrystalline RDX was measured and compared with simulated INS constructed from the solid-state calculations. The vibrational frequencies calculated from the solid-state methods had average deviations of 10 cm(-1) or less, whereas previously published frequencies based on an isolated-molecule approximation had deviations of 65 cm(-1) or less, illustrating the importance of including crystalline forces. On the basis of the calculations and analysis, it was possible to assign the normal modes and symmetries, which agree well with previous assignments. Four possible "doorway modes" were found in the energy range defined by the lattice modes, which were all found to contain fundamental contributions from rotation of the nitro groups.

Association between Phthalate Exposure and the Use of Plastic Containers in Shanghai Adults.

PubMed

Dong, Rui Hua; Zhang, Han; Zhang, Mei Ru; Chen, Jing Si; Wu, Min; Li, Shu Guang; Chen, Bo

2017-10-01

Consuming phthalates may be due to the presence of food contact materials, such as plastic containers. In this study, we investigated the association between plastic container use and phthalate exposure in 2,140 Shanghai adults. Participants completed a questionnaire on the frequency of using plastic containers in different scenarios in the previous year (e.g., daily, weekly) and on the consumption of plastic-packaged foods in the previous three days (yes or no). Urinary phthalate metabolites were used to assess the association between phthalate exposure and the use of plastic containers. The metabolites of di-(2-ethylhexyl) phthalate (DEHP) were the most frequently detected in urine. The results revealed that phthalate exposure was associated with consumption of plastic-packaged breakfast or processed food items in the previous three days. The consumption of these two food items had strong synergistic effects on increasing urinary concentrations of most phthalate metabolites. Our results of plastic-packaged breakfast and processed food may be explained by the use of flexible plastic containers, indicating the importance of risk assessment for the application of flexible plastic containers. Copyright © 2017 The Editorial Board of Biomedical and Environmental Sciences. Published by China CDC. All rights reserved.

Recently published analytical methods for determining alcohol in body materials : alcohol countermeasures literature review

DOT National Transportation Integrated Search

1974-10-01

The author has brought the review of published analytical methods for determining alcohol in body materials up-to- date. The review deals with analytical methods for alcohol in blood and other body fluids and tissues; breath alcohol methods; factors ...

Bibliography of work on the heterogeneous photocatalytic removal of hazardous compounds from water and air, Update Number 2 to October 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blake, D.M.

1997-01-01

The Solar Industrial Program has developed processes that destroy hazardous substances in or remove them from water and air. The processes of interest in this report are based on the application of heterogeneous photocatalysts, principally titanium dioxide or modifications thereof, but work on other heterogeneous catalysts is included in this compilation. This report continues bibliographies that were published in May, 1994, and October, 1995. The previous reports included 663 and 574 citations, respectively. This update contains an additional 518 references. These were published during the period from June 1995 to October 1996, or are references from prior years that weremore » not included in the previous reports. The work generally focuses on removing hazardous contaminants from air or water to meet environmental or health regulations. This report also references work on properties of semiconductor photocatalysts and applications of photocatalytic chemistry in organic synthesis. This report follows the same organization as the previous publications. The first part provides citations for work done in a few broad categories that are generic to the process. Three tables provide references to work on specific substances. The first table lists organic compounds that are included in various lists of hazardous substances identified by the US Environmental Protection Agency (EPA). The second table lists compounds not included in those categories, but which have been treated in a photocatalytic process. The third table covers inorganic compounds that are on EPA lists of hazardous materials or that have been treated by a photocatalytic process. A short update on companies that are active in providing products or services based on photocatalytic processes is provided.« less

What happens to allochthonous material that falls into streams? A synthesis of new and published information from Coweeta

Treesearch

J. R Webster; E. F Benfield; T. P. Ehrman; M. A. Schaeffer; J. L. Tanks; J. J. Hutchens; D. J. D' angelo

1999-01-01

1. One of two things can happen to allochthonous material once it enters a stream: it can be broken down or it can be transported downstream. The efficiency with which allochthonous material is used is the result of these two opposing factors: breakdown and transport. 2. The present synthesis of new and published studies at Coweeta Hydrologic Laboratory compares...

Title list of documents made publicly available, July 1--31, 1996: Volume 18, No. 7

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This monthly publication describes information received and published by US NRC. This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and published by NRC pertinent to its role as a regulatory agency. Following indexes are included: personal author, corporate source, report number, and cross reference of enclosures to principal documents.

Quality Managment Program (QMP) report: A review of quality management programs developed in response to Title 10, Section 35.32 of the Code of Federal Regulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Witte, M.C.

1994-10-01

In July of 1991, the Nuclear Regulatory Commission published a Final Rule in the Federal Register amending regulations governing medical therapeutic administrations of byproduct material and certain uses of radioactive sodium iodide. These amendments required implementation of a Quality Management Program (QMP) to provide high confidence that the byproduct material -- or radiation from byproduct material -- will be administered as directed by an authorized user physician. Herein, this rule is referred to as the QM rule. The Final Rule was published after two proposed rules had been published in the Federal Register.

Textbooks and the American Indian.

ERIC Educational Resources Information Center

Costo, Rupert, Ed.

An independent Indian publishing house has been formed to provide classroom instructional materials which deal accurately with the history, culture, and role of the American Indian. This book is a preliminary statement in that publishing program. General criteria, valid for instructional materials from elementary through high school, are applied…

Experimental artifacts influencing polarization sensitive magneto-Raman spectroscopy

NASA Astrophysics Data System (ADS)

Thirunavukkuarasu, K.; Lu, Z.; Su, L.; Yu, Y.; Cao, L.; Ballotin, M. V.; Christianen, P. C. M.; Zhang, Y.; Smirnov, D.

Since the discovery of graphene, there has been an explosion of research on 2D layered materials such as transition metal dichalcogenides (TMDs). Among several experimental techniques utilized for studying these materials, Raman spectroscopy has proven to be a very powerful tool due to it's sensitivity to layer numbers, interlayer coupling etc. Layered MoS2, member of TMD family, is a typical example with promising applications in nano-optoelectronics. A recent magneto-Raman investigations on MoS2 published by J. Ji etal reported an observation of giant magneto-optical effect. In this work, the intensity of Raman modes exhibited dramatic change in intensities and was attributed to field-induced broken symmetry on Raman scattering cross-section. Due to the ambiguous nature of the interpretation presented in this publication, we performed further Raman studies on MoS2 at high magnetic fields to illustrate the experimental factors overlooked by the previous study. It is highly important to consider the magnetic field-induced rotation of the polarization of the light and its effect on the Raman active phonon modes in anisotropic materials. A detailed report of our magneto-Raman experiments and their outcomes will be presented.

Silver nanoparticle based antibacterial methacrylate hydrogels potential for bone graft applications.

PubMed

González-Sánchez, M Isabel; Perni, Stefano; Tommasi, Giacomo; Morris, Nathanael Glyn; Hawkins, Karl; López-Cabarcos, Enrique; Prokopovich, Polina

2015-05-01

Infections are frequent and very undesired occurrences after orthopedic procedures; furthermore, the growing concern caused by the rise in antibiotic resistance is progressively dwindling the efficacy of such drugs. Artificial bone graft materials could solve some of the problems associated with the gold standard use of natural bone graft such as limited bone material, pain at the donor site and rejections if donor tissue is used. We have previously described new acrylate base nanocomposite hydrogels as bone graft materials. In the present paper, we describe the integration of silver nanoparticles in the polymeric mineralized biomaterial to provide non-antibiotic antibacterial activity against Staphylococcus epidermidis and Methicillin-resistant Staphylococcus aureus. Two different crosslinking degrees were tested and the silver nanoparticles were integrated into the composite matrix by means of three different methods: entrapment in the polymeric hydrogel before the mineralization; diffusion during the process of calcium phosphate crystallization and adsorption post-mineralization. The latter being generally the most effective method of encapsulation; however, the adsorption of silver nanoparticles inside the pores of the biomaterial led to a decreasing antibacterial activity for adsorption time longer than 2 days. Copyright © 2015. Published by Elsevier B.V.

Active counter electrode in a-SiC electrochemical metallization memory

NASA Astrophysics Data System (ADS)

Morgan, K. A.; Fan, J.; Huang, R.; Zhong, L.; Gowers, R.; Ou, J. Y.; Jiang, L.; De Groot, C. H.

2017-08-01

Cu/amorphous-SiC (a-SiC) electrochemical metallization memory cells have been fabricated with two different counter electrode (CE) materials, W and Au, in order to investigate the role of CEs in a non-oxide semiconductor switching matrix. In a positive bipolar regime with Cu filaments forming and rupturing, the CE influences the OFF state resistance and minimum current compliance. Nevertheless, a similarity in SET kinetics is seen for both CEs, which differs from previously published SiO2 memories, confirming that CE effects are dependent on the switching layer material or type. Both a-SiC memories are able to switch in the negative bipolar regime, indicating Au and W filaments. This confirms that CEs can play an active role in a non-oxide semiconducting switching matrix, such as a-SiC. By comparing both Au and W CEs, this work shows that W is superior in terms of a higher R OFF/R ON ratio, along with the ability to switch at lower current compliances making it a favourable material for future low energy applications. With its CMOS compatibility, a-SiC/W is an excellent choice for future resistive memory applications.

Externalities and article citations: experience of a national public health journal (Gaceta Sanitaria).

PubMed

Ruano-Ravina, Alberto; Álvarez-Dardet, Carlos; Domínguez-Berjón, M Felicitas; Fernández, Esteve; García, Ana M; Borrell, Carme

2016-01-01

The purpose of the study was to analyze the determinants of citations such as publication year, article type, article topic, article selected for a press release, number of articles previously published by the corresponding author, and publication language in a Spanish journal of public health. Observational study including all articles published in Gaceta Sanitaria during 2007-2011. We retrieved the number of citations from the ISI Web of Knowledge database in June 2013 and also information on other variables such as number of articles published by the corresponding author in the previous 5 years (searched through PubMed), selection for a press release, publication language, article type and topic, and others. We included 542 articles. Of these, 62.5% were cited in the period considered. We observed an increased odds ratio of citations for articles selected for a press release and also with the number of articles published previously by the corresponding author. Articles published in English do not seem to increase their citations. Certain externalities such as number of articles published by the corresponding author and being selected for a press release seem to influence the number of citations in national journals. Copyright © 2016 Elsevier Inc. All rights reserved.

Further experience with the local lymph node assay using standard radioactive and nonradioactive cell count measurements.

PubMed

Kolle, Susanne N; Basketter, David; Schrage, Arnhild; Gamer, Armin O; van Ravenzwaay, Bennard; Landsiedel, Robert

2012-08-01

In a previous study, the predictive capacity of a modified local lymph node assay (LLNA) based on cell counts, the LNCC, was demonstrated to be closely similar to that of the original assay. In addition, a range of substances, including some technical/commercial materials and a range of agrochemical formulations (n = 180) have also been assessed in both methods in parallel. The results in the LNCC and LLNA were generally consistent, with 86% yielding an identical classification outcome. Discordant results were associated with borderline data and were evenly distributed between the two methods. Potency information derived from each method also demonstrated good consistency (n = 101), with 93% of predictions being close. Skin irritation was observed only infrequently and was most commonly associated with positive results; it was not associated with the discordant results. Where different vehicles were used with the same test material, the effect on sensitizing activity was modest, consistent with historical data. Analysis of positive control data indicated that the LNCC and LLNA displayed similar levels of biological variation. When taken in combination with the previously published results on LLNA Performance Standard chemicals, it is concluded that the LNCC provides a viable non-radioactive alternative to the LLNA for the assessment of substances, including potency predictions, as well as for the evaluation of preparations. Copyright © 2012 John Wiley & Sons, Ltd.

In preparation of the nationwide dissemination of the school-based obesity prevention program DOiT: stepwise development applying the intervention mapping protocol.

PubMed

van Nassau, Femke; Singh, Amika S; van Mechelen, Willem; Brug, Johannes; Chin A Paw, Mai J M

2014-08-01

The school-based Dutch Obesity Intervention in Teenagers (DOiT) program is an evidence-based obesity prevention program. In preparation for dissemination throughout the Netherlands, this study aimed to adapt the initial program and to develop an implementation strategy and materials. We revisited the Intervention Mapping (IM) protocol, using results of the previous process evaluation and additional focus groups and interviews with students, parents, teachers, and professionals. The adapted 2-year DOiT program consists of a classroom, an environmental and a parental component. The year 1 lessons aim to increase awareness and knowledge of healthy behaviors. The lessons in year 2 focus on the influence of the (obesogenic) environment. The stepwise development of the implementation strategy resulted in objectives that support teachers' implementation. We developed a 7-step implementation strategy and supporting materials by translating the objectives into essential elements and practical strategies. This study illustrates how revisiting the IM protocol resulted in an adapted program and tailored implementation strategy based on previous evaluations as well as input from different stakeholders. The stepwise development of DOiT can serve as an example for other evidence-based programs in preparation for wider dissemination. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

Monogenetic origin of Ubehebe Crater maar volcano, Death Valley, California: Paleomagnetic and stratigraphic evidence

NASA Astrophysics Data System (ADS)

Champion, Duane E.; Cyr, Andy; Fierstein, Judy; Hildreth, Wes

2018-04-01

Paleomagnetic data for samples collected from outcrops of basaltic spatter at the Ubehebe Crater cluster, Death Valley National Park, California, record a single direction of remanent magnetization indicating that these materials were emplaced during a short duration, monogenetic eruption sequence 2100 years ago. This conclusion is supported by geochemical data encompassing a narrow range of oxide variation, by detailed stratigraphic studies of conformable phreatomagmatic tephra deposits showing no evidence of erosion between layers, by draping of sharp rimmed craters by later tephra falls, and by oxidation of later tephra layers by the remaining heat of earlier spatter. This model is also supported through a reinterpretation and recalculation of the published 10Be age results (Sasnett et al., 2012) from an innovative and bold exposure-age study on very young materials. Their conclusion of multiple and protracted eruptions at Ubehebe Crater cluster is here modified through the understanding that some of their quartz-bearing clasts inherited 10Be from previous exposure on the fan surface (too old), and that other clasts were only exposed at the surface by wind and/or water erosion centuries after their eruption (too young). Ubehebe Crater cluster is a well preserved example of young monogenetic maar type volcanism protected within a National Park, and it represents neither a protracted eruption sequence as previously thought, nor a continuing volcanic hazard near its location.

Homozygous PPT1 Splice Donor Mutation in a Cane Corso Dog With Neuronal Ceroid Lipofuscinosis.

PubMed

Kolicheski, A; Barnes Heller, H L; Arnold, S; Schnabel, R D; Taylor, J F; Knox, C A; Mhlanga-Mutangadura, T; O'Brien, D P; Johnson, G S; Dreyfus, J; Katz, M L

2017-01-01

A 10-month-old spayed female Cane Corso dog was evaluated after a 2-month history of progressive blindness, ataxia, and lethargy. Neurologic examination abnormalities indicated a multifocal lesion with primarily cerebral and cerebellar signs. Clinical worsening resulted in humane euthanasia. On necropsy, there was marked astrogliosis throughout white matter tracts of the cerebrum, most prominently in the corpus callosum. In the cerebral cortex and midbrain, most neurons contained large amounts of autofluorescent storage material in the perinuclear area of the cells. Cerebellar storage material was present in the Purkinje cells, granular cell layer, and perinuclear regions of neurons in the deep nuclei. Neuronal ceroid lipofuscinosis (NCL) was diagnosed. Whole genome sequencing identified a PPT1c.124 + 1G>A splice donor mutation. This nonreference assembly allele was homozygous in the affected dog, has not previously been reported in dbSNP, and was absent from the whole genome sequences of 45 control dogs and 31 unaffected Cane Corsos. Our findings indicate a novel mutation causing the CLN1 form of NCL in a previously unreported dog breed. A canine model for CLN1 disease could provide an opportunity for therapeutic advancement, benefiting both humans and dogs with this disorder. Copyright © 2016 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

The Use of Light/Chemically Hardened Polymethylmethacrylate, Polyhydroxylethylmethacrylate, and Calcium Hydroxide Graft Material in Combination With Polyanhydride Around Implants and Extraction Sockets in Minipigs: Part II: Histologic and Micro-CT Evaluations

PubMed Central

Hasturk, Hatice; Kantarci, Alpdogan; Ghattas, Mazen; Dangaria, Smit J.; Abdallah, Rima; Morgan, Elise F.; Diekwisch, Thomas G.H.; Ashman, Arthur; Van Dyke, Thomas

2015-01-01

Background This report is the second part of the previously published study on the impact of light/chemical hardening technology and a newly formulated composite graft material for crestal augmentation during immediate implant placement. Methods A total of 48 implants were placed into the sockets of the mesial roots of freshly extracted mandibular premolar teeth in three minipigs. Crestal areas and intrabony spaces were randomly augmented with light-hardened graft materials including a composite graft consisting of polymethylmethacrylate, polyhydroxylethylmethacrylate, and calcium hydroxide (PPCH) plus polyanhydride (PA); PPCH graft; and PA graft, or left untreated. Distal sockets not receiving implants and the sockets of first molars (n = 60) were randomly treated with one of the graft materials or left empty. In addition, two molar sockets were treated with the original PPCH graft material. Quantitative microcomputed tomography (micro-CT) was used to assess alveolar bone structure and tissue compositions. Histologic evaluations included descriptive histology to assess the peri-implant wound healing, as well as histomorphometric measurements to determine bone-to-implant contact (BIC). Results Both trabecular and cortical bone measurements by micro-CT did not reveal any significant differences among the groups. Sites augmented with PPCH+PA resulted in significantly greater BIC surface than PPCH alone and no-graft-treated implants (P <0.05) histologically. Stained ground sections showed complete bone formation between bone and implant surface in the PPCH+PA group, whereas sites without augmentation showed large gaps between bone and implant surfaces, indicating a slower bone apposition and less BIC surface compared to all other groups. Similar to implant sections, all materials showed positive outcome on trabecular and cortical bone formation in extraction sockets with an intact crestal cortical bone. Conclusion Histologic evaluations supported the previous findings on implant stability and function and confirmed that PPCH+PA provides a greater BIC with a well-organized implant–bone interface and is useful in crestal augmentation during immediate implant placement. PMID:24502615

The use of light/chemically hardened polymethylmethacrylate, polyhydroxylethylmethacrylate, and calcium hydroxide graft material in combination with polyanhydride around implants and extraction sockets in minipigs: Part II: histologic and micro-CT evaluations.

PubMed

Hasturk, Hatice; Kantarci, Alpdogan; Ghattas, Mazen; Dangaria, Smit J; Abdallah, Rima; Morgan, Elise F; Diekwisch, Thomas G H; Ashman, Arthur; Van Dyke, Thomas

2014-09-01

This report is the second part of the previously published study on the impact of light/chemical hardening technology and a newly formulated composite graft material for crestal augmentation during immediate implant placement. A total of 48 implants were placed into the sockets of the mesial roots of freshly extracted mandibular premolar teeth in three minipigs. Crestal areas and intrabony spaces were randomly augmented with light-hardened graft materials including a composite graft consisting of polymethylmethacrylate, polyhydroxylethylmethacrylate, and calcium hydroxide (PPCH) plus polyanhydride (PA); PPCH graft; and PA graft, or left untreated. Distal sockets not receiving implants and the sockets of first molars (n = 60) were randomly treated with one of the graft materials or left empty. In addition, two molar sockets were treated with the original PPCH graft material. Quantitative microcomputed tomography (micro-CT) was used to assess alveolar bone structure and tissue compositions. Histologic evaluations included descriptive histology to assess the peri-implant wound healing, as well as histomorphometric measurements to determine bone-to-implant contact (BIC). Both trabecular and cortical bone measurements by micro-CT did not reveal any significant differences among the groups. Sites augmented with PPCH+PA resulted in significantly greater BIC surface than PPCH alone and no-graft-treated implants (P <0.05) histologically. Stained ground sections showed complete bone formation between bone and implant surface in the PPCH+PA group, whereas sites without augmentation showed large gaps between bone and implant surfaces, indicating a slower bone apposition and less BIC surface compared to all other groups. Similar to implant sections, all materials showed positive outcome on trabecular and cortical bone formation in extraction sockets with an intact crestal cortical bone. Histologic evaluations supported the previous findings on implant stability and function and confirmed that PPCH+PA provides a greater BIC with a well-organized implant-bone interface and is useful in crestal augmentation during immediate implant placement.

Mechanical properties of materials with nanometer scale dimensions and microstructures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nix, William D.

2015-08-05

The three-year grant for which this final report is required extends from 2011 to 2015, including a one-year, no-cost extension. But this is just the latest in a long series of grants from the Division of Materials Sciences of DOE and its predecessor offices and agencies. These include contracts or grants from: the Metallurgy Branch of the U.S. Atomic Energy Commission (from the late 1960s to the mid-1970s), the Materials Science Program of the U.S. Energy Research and Development Administration (from the mid- to late- 1970s), and the Division of Materials Science of the Office of Basic Energy Sciences ofmore » the U.S. Department of Energy (from the early 1980s to the present time). Taken all together, these offices have provided nearly continuous support for our research for nearly 50 years. As we have said on many occasions, this research support has been the best we have ever had, by far. As we look back on the nearly five decades of support from the Division of Materials Sciences and the predecessor offices, we find that the continuity of support that we have enjoyed has allowed us to be most productive and terms of papers published, doctoral students graduated and influence on the field of materials science. This report will, of course, cover the three-year period of the present grant, in summary form, but will also make reference to the output that resulted from support of previous grants from the Division of Materials Sciences and its predecessor offices.« less

Evaluation of National Geographic School Publishing Nonfiction Literacy Materials. Summary Report.

ERIC Educational Resources Information Center

Metcalf, Kim K.; Smith, Carl B.; Legan, Natalie A.

During the 2001-02 academic year, a purposive, national evaluation was undertaken of "Windows on Literacy" and "Reading Expeditions," two new school-based programs produced by the School Publishing Division of the National Geographic Society (NGS). The evaluation sought to determine the efficacy of the new materials for…

41 CFR 105-60.202 - Published materials available for sale to the public.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 41 Public Contracts and Property Management 3 2011-01-01 2011-01-01 false Published materials available for sale to the public. 105-60.202 Section 105-60.202 Public Contracts and Property Management Federal Property Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION Regional...

41 CFR 105-60.202 - Published materials available for sale to the public.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 41 Public Contracts and Property Management 3 2012-01-01 2012-01-01 false Published materials available for sale to the public. 105-60.202 Section 105-60.202 Public Contracts and Property Management Federal Property Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION Regional...

41 CFR 105-60.202 - Published materials available for sale to the public.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 41 Public Contracts and Property Management 3 2013-07-01 2013-07-01 false Published materials available for sale to the public. 105-60.202 Section 105-60.202 Public Contracts and Property Management Federal Property Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION Regional...

41 CFR 105-60.202 - Published materials available for sale to the public.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false Published materials available for sale to the public. 105-60.202 Section 105-60.202 Public Contracts and Property Management Federal Property Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION Regional...

Electronic Publishing. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This packet of technology learning activity (TLA) materials on electronic publishing for students in grades 6-10 consists of a technology education overview, information on use, and the instructor's and student's sections. The overview discusses the technology education program and materials. Components of the instructor and student sections are…

Making Materials Science and Engineering Data More Valuable Research Products (Postprint)

DTIC Science & Technology

2014-09-12

uncertainties in the publishing market - place.b Also, there is a possibility that some for-profit publishers could try to restrict access to digital...Kaufman JG, Glatzman JS (eds) Computerization and networking of materials databases: Second Volume, ASTM STP 1106. American Society for Testing and

The Internet Is Not the Library

ERIC Educational Resources Information Center

Verdesca, Anthony F.

2009-01-01

In the not too distant past, libraries kept a vertical file of printed materials that typically consisted of newspaper and magazine clippings, pamphlets, brochures, maps, photographs, and sundry whatnots. Most, if not all, of these materials were irregularly published or they were not published in any official manner. They were seen as incidental…

Historigraphical analysis of the 1857 Ft. Tejon earthquake, San Andreas Fault, California: Preliminary results

NASA Astrophysics Data System (ADS)

Martindale, D.; Evans, J. P.

2002-12-01

Past historical analyses of the 1857 Forth Tejon earthquake include Townley and Allen (1939); Wood (1955) re-examined the earthquake and added some additional new material, and Agnew and Sieh (1978) published an extensive review of the previous publications and included primary sources not formerly known. Since 1978, most authors have reiterated the findings of Agnew and Sieh, with the exception of Meltzner and Wald's 1998 work that built on Sieh's foreshock research and included an extensive study of aftershocks. Approximately twenty-five years has past since the last full investigation of the event. In the last several decades, libraries and archives have continued to gather additional documents. Staff members continually inventory new and existing collections, making them accessible to researchers today. As a result, we are conducting an updated examination, with the hope of new insight regarding the 1857 Fort Tejon earthquake. We use a new approached to the topic: the research skills of a historian in collaboration with a geologist to generate quantitative data on the nature and location of ground shaking associated with the earthquake. We analyze documents from the Huntington Library, California State Historical Society, California State Library-California Room, Utah Historical Association Information Center, the Church of Jesus Christ of Latter-day Saints (LDS) Archives and Historical Department, Cal Tech Archives, the National Archives, and the Fort Tejon State Park. New facilities reviewed also include Utah State University, University of Utah, and the LDS Family History Center. Each facility not only provided formerly quoted sources, but many offered new materials. For example, previous scholars examined popular, well-known newspapers; yet, publications in smaller towns and in languages other than English, also existed. Thirty newspapers published in January 1857 were located. We find records of the event at least one year after the earthquake. One outcome of such a search includes letters, approximately eight pictures useful in structure-damage analysis. Over 170 newspapers were published during 1857 throughout California, Nevada, and New Mexico Territory, encompassing the area of Arizona and New Mexico today. Historical information regarding the settlement of areas also proved useful. Although earlier scholars knew of LDS settlement missions in San Bernardino, California and Las Vegas, Nevada, only brief information was located. Preliminary results include increasing the felt area to include Las Vegas, Nevada; support for a Mercalli Index of IX or even X for San Bernardino; VIII or greater for sites NE of Sacramento, a northwest to southeast rupture pattern, and reports of electromagnetic disturbances. Based on these results, we suggest that the 1857 Ft. Tejon earthquake be felt over a wider area, and in places created greater ground shaking, than previously documented.

The Impact of Guided Notes on Post-Secondary Student Achievement: A Meta-Analysis

ERIC Educational Resources Information Center

Larwin, Karen H.; Larwin, David A.

2013-01-01

The common practice of using of guided notes in the post-secondary classroom is not fully appreciated or understood. In an effort to add to the existing research about this phenomenon, the current investigation expands on previously published research and one previously published meta-analysis that examined the impact of guided notes on…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morris, E.B.

The Title List of Documents Made Publicly Available is a monthly publication. It describes the information received and published by the U.S. Nuclear Regulatory Commission (NRC). This information includes: (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) non-docketed material received and published by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index.

Title of documents made publicly available, August 1--31, 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yanez, V.E.

1996-10-01

This publication describes the information received and published by the US Nuclear Regulatory Commission (NRC). This information includes: (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) non-docketed material received and published by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index.

Are C-reps contextual representations? A reply to Brewin and Burgess.

PubMed

Pearson, David G

2014-03-01

Brewin and Burgess (2013) argue that our recent papers investigating the role of contextual representations in intrusive memories do not pose a challenge to dual-representation theory as originally claimed (Pearson, 2012; Pearson, Ross, & Webster, 2012). Here I point out that their alternative explanation for our results can be rejected using data already published in both papers. I also argue that their definition of what constitutes a contextual representation renders their revised dual-representation theory incompatible with experimental results that have previously been argued in the literature to support it. Valuable though their contribution is, it does not impact on our main conclusion that abstract contextual representations serve to increase intrusive memories for traumatic material. Copyright © 2013 Elsevier Ltd. All rights reserved.

Wave propagation in embedded inhomogeneous nanoscale plates incorporating thermal effects

NASA Astrophysics Data System (ADS)

Ebrahimi, Farzad; Barati, Mohammad Reza; Dabbagh, Ali

2018-04-01

In this article, an analytical approach is developed to study the effects of thermal loading on the wave propagation characteristics of an embedded functionally graded (FG) nanoplate based on refined four-variable plate theory. The heat conduction equation is solved to derive the nonlinear temperature distribution across the thickness. Temperature-dependent material properties of nanoplate are graded using Mori-Tanaka model. The nonlocal elasticity theory of Eringen is introduced to consider small-scale effects. The governing equations are derived by the means of Hamilton's principle. Obtained frequencies are validated with those of previously published works. Effects of different parameters such as temperature distribution, foundation parameters, nonlocal parameter, and gradient index on the wave propagation response of size-dependent FG nanoplates have been investigated.

Platform construction of molecular breeding for utilization of brown macroalgae.

PubMed

Takagi, Toshiyuki; Kuroda, Kouichi; Ueda, Mitsuyoshi

2018-01-01

Brown macroalgae are characterized by a large size and high productivity without requiring arable land, fresh water, and fertilizer. Furthermore, since brown macroalgae contain little or no lignin, simple biorefinery processing can efficiently produce sugars from this material. Therefore, brown macroalgae have attracted attention as an alternative feedstock for bioethanol production. However, the utilization of biotechnologies previously developed for terrestrial biomass processing results in difficulties in the bioconversion of brown macroalgae. Recently, several studies have developed biotechnologies for using major carbohydrates of brown macroalgae, such as laminarin, mannitol, and alginate. This review focuses on these fermentation biotechnologies using natural or engineered microorganisms. Copyright © 2017 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Magnetic and transport properties of Ce 6MnSb 15

NASA Astrophysics Data System (ADS)

Godart, Claude; Rogl, Peter; Alleno, Eric; Gonçalves, António P.; Rouleau, Olivier

2006-05-01

In our effort to look for new Ce/Yb-based compounds with large unit cell, we studied Ce 6MnSb 15. Rietveld refinements of X-ray powder diffraction confirm that the material crystallizes in orthorhombic structure La 6MnSb 15-type, Imm2 space group, with 2 Ce sites (8e and 4d) and lattice parameters a=15.1643 Å, b=19.3875 Å and c=4.2794 Å, which closely agree with those already published. Magnetic susceptibility results show a paramagnetic behavior and no magnetic order down to 2 K in contrast to antiferromagnetic order previously reported at 7 K. Resistivity shows a metallic behavior and the Seebeck coefficient is very low, typically -2 μV/K.

Catalogue of the type specimens deposited in the Mollusca Collection of the Museu Nacional / UFRJ, Rio de Janeiro, Brazil.

PubMed

Pimenta, Alexandre Dias; Monteiro, Júlio César; Barbosa, André Favaretto; Salgado, Norma Campos; Coelho, Arnaldo Campos Dos Santos

2014-03-20

A curatorial revision of the type specimens deposited in the Mollusca Collection of the Museu Nacional / UFRJ, Rio de Janeiro, Brazil (MNRJ) revealed the existence of 518 lots of type specimens (holotypes, neotypes, syntypes and paratypes) for 285 names of molluscan taxa from 88 families, including 247 gastropods, 30 bivalves, three cephalopods and five scaphopods. A total of 106 holotypes and one neotype are deposited in the MNRJ. Type material for ten nominal taxa described as being deposited in the MNRJ was not located; the probable reasons are discussed. Some previously published erroneous information about types in the MNRJ is rectified. A total of 37 type specimens are illustrated.

Ozone measurement system for NASA global air sampling program

NASA Technical Reports Server (NTRS)

Tiefermann, M. W.

1979-01-01

The ozone measurement system used in the NASA Global Air Sampling Program is described. The system uses a commercially available ozone concentration monitor that was modified and repackaged so as to operate unattended in an aircraft environment. The modifications required for aircraft use are described along with the calibration techniques, the measurement of ozone loss in the sample lines, and the operating procedures that were developed for use in the program. Based on calibrations with JPL's 5-meter ultraviolet photometer, all previously published GASP ozone data are biased high by 9 percent. A system error analysis showed that the total system measurement random error is from 3 to 8 percent of reading (depending on the pump diaphragm material) or 3 ppbv, whichever are greater.

Fishtail on a line technique for capsular tension ring insertion.

PubMed

Rixen, Jordan J; Oetting, Thomas A

2014-07-01

We describe a capsular tension ring (CTR) insertion technique that is a modification of the previously described fishtail technique. A suture line is used to pull the leading eyelet out through the main incision to form the fish configuration. Similar to the fishtail technique, this insertion technique minimizes the risk for zonular damage or a capsule tear because the CTR is not dialed into the capsular bag. The advantage of the suture line is that it prevents over bending of the CTR during insertion through the main incision, which can occur using the traditional fishtail technique. Neither author has a financial or proprietary interest in any material or method mentioned. Copyright © 2014 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Developing Web Services for Technology Education. The Graphic Communication Electronic Publishing Project.

ERIC Educational Resources Information Center

Sanders, Mark

1999-01-01

Graphic Communication Electronic Publishing Project supports a Web site (http://TechEd.vt.edu/gcc/) for graphic communication teachers and students, providing links to Web materials, conversion of print materials to electronic formats, and electronic products and services including job listings, resume posting service, and a listserv. (SK)

Oxidation Mechanisms of Toluene and Benzene

NASA Technical Reports Server (NTRS)

Bittker, David A.

1995-01-01

An expanded and improved version of a previously published benzene oxidation mechanism is presented and shown to model published experimental data fairly successfully. This benzene submodel is coupled to a modified version of a toluene oxidation submodel from the recent literature. This complete mechanism is shown to successfully model published experimental toluene oxidation data for a highly mixed flow reactor and for higher temperature ignition delay times in a shock tube. A comprehensive sensitivity analysis showing the most important reactions is presented for both the benzene and toluene reacting systems. The NASA Lewis toluene mechanism's modeling capability is found to be equivalent to that of the previously published mechanism which contains a somewhat different benzene submodel.

Validating internet research: a test of the psychometric equivalence of internet and in-person samples.

PubMed

Meyerson, Paul; Tryon, Warren W

2003-11-01

This study evaluated the psychometric equivalency of Web-based research. The Sexual Boredom Scale was presented via the World-Wide Web along with five additional scales used to validate it. A subset of 533 participants that matched a previously published sample (Watt & Ewing, 1996) on age, gender, and race was identified. An 8 x 8 correlation matrix from the matched Internet sample was compared via structural equation modeling with a similar 8 x 8 correlation matrix from the previously published study. The Internet and previously published samples were psychometrically equivalent. Coefficient alpha values calculated on the matched Internet sample yielded reliability coefficients almost identical to those for the previously published sample. Factors such as computer administration and uncontrollable administration settings did not appear to affect the results. Demographic data indicated an overrepresentation of males by about 6% and Caucasians by about 13% relative to the U.S. Census (2000). A total of 2,230 participants were obtained in about 8 months without remuneration. These results suggest that data collection on the Web is (1) reliable, (2) valid, (3) reasonably representative, (4) cost effective, and (5) efficient.

Coached Peer Review: Developing the Next Generation of Authors.

PubMed

Sidalak, Daniel; Purdy, Eve; Luckett-Gatopoulos, S; Murray, Heather; Thoma, Brent; Chan, Teresa M

2017-02-01

Publishing in academic journals is challenging for learners. Those who pass the initial stages of internal review by an editor often find the anonymous peer review process harsh. Academic blogs offer alternate avenues for publishing medical education material. Many blogs, however, lack a peer review process, which some consumers argue compromises the quality of materials published. CanadiEM (formerly BoringEM) is an academic educational emergency medicine blog dedicated to publishing high-quality materials produced by learners (i.e., residents and medical students). The editorial team has designed and implemented a collaborative "coached peer review" process that comprises an open exchange among the learner-author, editors, and reviewers. The goal of this process is to facilitate the publication of high-quality academic materials by learner-authors while providing focused feedback to help them develop academic writing skills. The authors of this Innovation Report surveyed (February-June 2015) their blog's learner-authors and external expert "staff" reviewers who had participated in coached peer review for their reactions to the process. The survey results revealed that participants viewed the process positively compared with both traditional journal peer review and academic blog publication processes. Participants found the process friendly, easy, efficient, and transparent. Learner-authors also reported increased confidence in their published material. These outcomes met the goals of coached peer review. CanadiEM aims to inspire continued participation in, exposure to, and high-quality production of academic writing by promoting the adoption of coached peer review for online educational resources produced by learners.

12 CFR 630.3 - Publishing and filing the report to investors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Publishing and filing the report to investors... Publishing and filing the report to investors. (a) The disclosure entities shall jointly publish the... material changes in information occurring since the most recently published report to investors. (b) Each...

Expression of the human UDP-galactose transporter gene hUGT1 in tobacco plants' enhanced plant hardness.

PubMed

Abedi, Tayebeh; Khalil, Mohamed Farouk Mohamed; Koike, Kanae; Hagura, Yoshio; Tazoe, Yuma; Ishida, Nobuhiro; Kitamura, Kenji; Tanaka, Nobukazu

2018-04-09

We reported previously that tobacco plants transformed with the human UDP-galactose transporter 1 gene (hUGT1) had enhanced growth, displayed characteristic traits, and had an increased proportion of galactose (hyper-galactosylation) in the cell wall matrix polysaccharides. Here, we report that hUGT1-transgenic plants have an enhanced hardness. As determined by breaking and bending tests, the leaves and stems of hUGT1-transgenic plants were harder than those of control plants. Transmission electron microscopy revealed that the cell walls of palisade cells in leaves, and those of cortex cells and xylem fibers in stems of hUGT1-transgenic plants, were thicker than those of control plants. The increased amounts of total cell wall materials extracted from the leaves and stems of hUGT1-transgenic plants supported the increased cell wall thickness. In addition, the cell walls of the hUGT1-transgenic plants showed an increased lignin contents, which was supported by the up-regulation of lignin biosynthetic genes. Thus, the heterologous expression of hUGT1 enhanced the accumulation of cell wall materials, which was accompanied by the increased lignin content, resulting in the increased hardness of the leaves and stems of hUGT1-trangenic plants. The enhanced accumulation of cell wall materials might be related to the hyper-galactosylation of cell wall matrix polysaccharides, most notably arabinogalactan, because of the enhanced UDP-galactose transport from the cytosol to the Golgi apparatus by hUGT1, as suggested in our previous report. Copyright © 2018 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Stiffness distribution in insect cuticle: a continuous or a discontinuous profile?

PubMed

Rajabi, H; Jafarpour, M; Darvizeh, A; Dirks, J-H; Gorb, S N

2017-07-01

Insect cuticle is a biological composite with a high degree of complexity in terms of both architecture and material composition. Given the complex morphology of many insect body parts, finite-element (FE) models play an important role in the analysis and interpretation of biomechanical measurements, taken by either macroscopic or nanoscopic techniques. Many previous studies show that the interpretation of nanoindentation measurements of this layered composite material is very challenging. To develop accurate FE models, it is of particular interest to understand more about the variations in the stiffness through the thickness of the cuticle. Considering the difficulties of making direct measurements, in this study, we use the FE method to analyse previously published data and address this issue numerically. For this purpose, sets of continuous or discontinuous stiffness profiles through the thickness of the cuticle were mathematically described. The obtained profiles were assigned to models developed based on the cuticle of three insect species with different geometries and layer configurations. The models were then used to simulate the mechanical behaviour of insect cuticles subjected to nanoindentation experiments. Our results show that FE models with discontinuous exponential stiffness gradients along their thickness were able to predict the stress and deformation states in insect cuticle very well. Our results further suggest that, for more accurate measurements and interpretation of nanoindentation test data, the ratio of the indentation depth to cuticle thickness should be limited to 7% rather than the traditional '10% rule'. The results of this study thus might be useful to provide a deeper insight into the biomechanical consequences of the distinct material distribution in insect cuticle and also to form a basis for more realistic modelling of this complex natural composite. © 2017 The Author(s).

Third-order elastic constants of diamond determined from experimental data

DOE PAGES

Winey, J. M.; Hmiel, A.; Gupta, Y. M.

2016-06-01

The pressure derivatives of the second-order elastic constants (SOECs) of diamond were determined by analyzing previous sound velocity measurements under hydrostatic stress [McSkimin and Andreatch, J. Appl. Phys. 43, 294 (1972)]. Furthermore, our analysis corrects an error in the previously reported results.We present a complete and corrected set of third-order elastic constants (TOECs) using the corrected pressure derivatives, together with published data for the nonlinear elastic response of shock compressed diamond [Lang and Gupta, Phys. Rev. Lett. 106, 125502 (2011)] and it differs significantly from TOECs published previously.

Higher-Order Theory for Functionally Graded Materials

NASA Technical Reports Server (NTRS)

Aboudi, Jacob; Pindera, Marek-Jerzy; Arnold, Steven M.

1999-01-01

This paper presents the full generalization of the Cartesian coordinate-based higher-order theory for functionally graded materials developed by the authors during the past several years. This theory circumvents the problematic use of the standard micromechanical approach, based on the concept of a representative volume element, commonly employed in the analysis of functionally graded composites by explicitly coupling the local (microstructural) and global (macrostructural) responses. The theoretical framework is based on volumetric averaging of the various field quantities, together with imposition of boundary and interfacial conditions in an average sense between the subvolumes used to characterize the composite's functionally graded microstructure. The generalization outlined herein involves extension of the theoretical framework to enable the analysis of materials characterized by spatially variable microstructures in three directions. Specialization of the generalized theoretical framework to previously published versions of the higher-order theory for materials functionally graded in one and two directions is demonstrated. In the applications part of the paper we summarize the major findings obtained with the one-directional and two-directional versions of the higher-order theory. The results illustrate both the fundamental issues related to the influence of microstructure on microscopic and macroscopic quantities governing the response of composites and the technologically important applications. A major issue addressed herein is the applicability of the classical homogenization schemes in the analysis of functionally graded materials. The technologically important applications illustrate the utility of functionally graded microstructures in tailoring the response of structural components in a variety of applications involving uniform and gradient thermomechanical loading.

Title list of documents made publicly available, December 1-31, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report includes the information received and published by the U.S. Nuclear Regulatory Commission (NRC) in December 1997. It includes: (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and (2) non-docketed material received and published by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by author, corporate source, and report number. This report includes six docketed items and 24 non-docketed items.

Title list of documents made publicly available, June 1-30, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This document is a monthly publication describing information received and published by the U.S. Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and published by NRC pertinent to its role as a regulatory agency. As used here, {open_quotes}docketed{close_quotes} does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records.

Apical Closure in Apexification: A Review and Case Report of Apexification Treatment of an Immature Permanent Tooth with Biodentine.

PubMed

Vidal, Karla; Martin, Gabriela; Lozano, Oscar; Salas, Marco; Trigueros, Jaime; Aguilar, Gabriel

2016-05-01

Materials such as calcium hydroxide paste and mineral trioxide aggregate are used in apexification treatment of immature permanent teeth, but the search for improved materials with higher characteristics of biocompatibility results in different materials. Biodentine is a tricalcium silicate cement that possesses adequate handling characteristics and acceptable mechanical and bioactivity properties. This report describes the case of a 9-year-old boy who was referred to the Department of Dental Clinic of Querétaro Autonomous University of Mexico. One month prior the patient had suffered a dental trauma of his upper left central incisor and had been treated by another dentist. The clinical diagnosis was previously initiated therapy and symptomatic apical periodontitis. The treatment was apexification with Biodentine. At follow-ups performed at 3, 6, and 18 months after treatment the tooth was asymptomatic. The cone-beam computed tomography scan at 18-month postoperative follow-up revealed continuity of periodontal ligament space, absence of periapical rarefactions, and a thin layer of calcified tissue formed apical to the Biodentine barrier. On the basis of sealing ability and biocompatibility, apexification treatment with Biodentine was applied in the present case report. The favorable clinical and radiographic outcome in this case demonstrated that Biodentine may be an efficient alternative to the conventional apexification materials. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Pristine and Surface-Modified Polymers in LEO: MISSE Results versus Predictive Models and Ground-Based Testing

NASA Astrophysics Data System (ADS)

Iskanderova, Zelina; Kleiman, Jacob I.; Tennyson, Rod C.

2009-01-01

Space flight data, collected and published by NASA Glenn Research Center (GRC) team for a set of pristine polymeric materials selected, compiled, and tested in two LEO flight experiments at the International Space Station, as part of the "Materials International Space Station Experiment" (MISSE), has been used for comparison with previously developed atomic oxygen erosion predictive models. The same set of materials was used for a ground-based fast atomic beam (FAO) experimental erosion study at ITL/UTIAS, where the FAO exposure was performed mostly at a standard fluence of 2×1020 cm-2, with the results collected in a database for the development of a prototype of predictive software. A comparison of MISSE-1 flight data with two predictive correlations has shown good agreement, confirming the developed approach to polymers erosion resistance forecast that might be used also for newly developed or untested in space polymeric materials. A number of surface-modified thin film space polymers, treated by two ITL-developed and patented surface modification technologies, Implantox™ [5] and Photosil™ [6], have been also included in MISSE flight experiment. The results from those MISSE samples have shown full protection of AO-sensitive main space-related hydrocarbon polymers, such as Kapton HN, back-metalized Kapton H and Kapton E, and Mylar, when treated by Implantox™ surface modification technology and significant erosion resistance enhancement up to full protection by Photosil™ treatment.

Development of a method to relate the moisture content of a building material to its water activity.

PubMed

Macher, J M; Mendell, M J; Chen, W; Kumagai, K

2017-05-01

Subjective indicators of building dampness consistently have been linked to health, but they are, at best, semi-quantitative, and objective and quantitative assessments of dampness are also needed to study dampness-related health effects. Investigators can readily and non-destructively measure the "moisture content" (MC) of building materials with hand-held moisture meters. However, MC does not indicate the amount of the water in a material that is available to microorganisms for growth, that is, the "water activity" (A w ). Unfortunately, A w has not been readily measurable in the field and is not relatable to MC unless previously determined experimentally, because for the same moisture meter reading, A w can differ across materials as well as during moisture adsorption vs desorption. To determine the A w s that correspond to MC levels, stable air relative humidities were generated in a glove box above saturated, aqueous salt solutions, and the A w of gypsum board and the relative humidity of the chamber air were tracked until they reached equilibrium. Strong correlations were observed between meter readings and gravimetrically determined MC (r=.91-1.00), among readings with three moisture meters (r=.87-.98), and between meter readings and gypsum board A w (r=.77-.99). © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Re-evaluation and extension of the scope of elements in US Geological Survey Standard Reference Water Samples

USGS Publications Warehouse

Peart, D.B.; Antweiler, Ronald C.; Taylor, Howard E.; Roth, D.A.; Brinton, T.I.

1998-01-01

More than 100 US Geological Survey (USGS) Standard Reference Water Samples (SRWSs) were analyzed for numerous trace constituents, including Al, As, B, Ba, Be, Bi, Br, Cd, Cr, Co, Cu, I, Fe, Pb, Li, Mn, Mo, Ni, Rb, Sb, Se, Sr, Te, Tl, U, V, Zn and major elements (Ca, Mg, Na, SiO2, SO4, Cl) by inductively coupled plasma mass spectrometry and inductively coupled plasma atomic emission spectrometry. In addition, 15 USGS SRWSs and National Institute of Standards and Technology (NIST) standard reference material (SRM) 1641b were analyzed for mercury using cold vapor atomic fluorescence spectrometry. Also USGS SRWS Hg-7 was analyzed using isotope dilution-inductively coupled plasma mass spectrometry. The results were compared with the reported certified values of the following standard reference materials: NIST SRM 1643a, 1643b, 1643c and 1643d and National Research Council of Canada Riverine Water Reference Materials for Trace Metals SLRS-1, SLRS-2 and SLRS-3. New concentration values for trace and major elements in the SRWSs, traceable to the certified standards, are reported. Additional concentration values are reported for elements that were neither previously published for the SRWSs nor traceable to the certified reference materials. Robust statistical procedures were used that were insensitive to outliers. These data can be used for quality assurance/quality control purposes in analytical laboratories.

Data mining for better material synthesis: The case of pulsed laser deposition of complex oxides

NASA Astrophysics Data System (ADS)

Young, Steven R.; Maksov, Artem; Ziatdinov, Maxim; Cao, Ye; Burch, Matthew; Balachandran, Janakiraman; Li, Linglong; Somnath, Suhas; Patton, Robert M.; Kalinin, Sergei V.; Vasudevan, Rama K.

2018-03-01

The pursuit of more advanced electronics, and finding solutions to energy needs often hinges upon the discovery and optimization of new functional materials. However, the discovery rate of these materials is alarmingly low. Much of the information that could drive this rate higher is scattered across tens of thousands of papers in the extant literature published over several decades but is not in an indexed form, and cannot be used in entirety without substantial effort. Many of these limitations can be circumvented if the experimentalist has access to systematized collections of prior experimental procedures and results. Here, we investigate the property-processing relationship during growth of oxide films by pulsed laser deposition. To do so, we develop an enabling software tool to (1) mine the literature of relevant papers for synthesis parameters and functional properties of previously studied materials, (2) enhance the accuracy of this mining through crowd sourcing approaches, (3) create a searchable repository that will be a community-wide resource enabling material scientists to leverage this information, and (4) provide through the Jupyter notebook platform, simple machine-learning-based analysis to learn the complex interactions between growth parameters and functional properties (all data/codes available on https://github.com/ORNL-DataMatls). The results allow visualization of growth windows, trends and outliers, which can serve as a template for analyzing the distribution of growth conditions, provide starting points for related compounds and act as a feedback for first-principles calculations. Such tools will comprise an integral part of the materials design schema in the coming decade.

Breaking into Print: A Beginner's Guide to Self-Publishing.

ERIC Educational Resources Information Center

Coelho, Elizabeth

1988-01-01

Outlines the business and production aspects of self-publishing, with some tips for desktop publishing, as it involves the design and development of Canadian English-as a-second-language instructional materials. (Author/CB)

Correlation, evaluation, and extension of linearized theories for tire motion and wheel shimmy

NASA Technical Reports Server (NTRS)

Smiley, Robert F

1957-01-01

An evaluation is made of the existing theories of a linearized tire motion and wheel shimmy. It is demonstrated that most of the previously published theories represent varying degrees of approximation to a summary theory developed in this report which is a minor modification of the basic theory of Von Schlippe and Dietrich. In most cases where strong differences exist between the previously published theories and summary theory, the previously published theories are shown to possess certain deficiencies. A series of systematic approximations to the summary theory is developed for the treatment of problems too simple to merit the use of the complete summary theory, and procedures are discussed for applying the summary theory and its systematic approximations to the shimmy of more complex landing-gear structures than have previously been considered. Comparisons of the existing experimental data with the predictions of the summary theory and the systematic approximations provide a fair substantiation of the more detailed approximate theories.

EDITORIAL: STAM celebrates its 10th anniversary STAM celebrates its 10th anniversary

NASA Astrophysics Data System (ADS)

Ushioda, Sukekatsu

2010-02-01

I would like to extend my warmest greetings to the readers and staff of Science and Technology of Advanced Materials (STAM), on the occasion of its 10th anniversary. Launched in 2000, STAM marks this year an important milestone in its history. This is a great occasion to celebrate. STAM was founded by Tsuyoshi Masumoto in collaboration with Teruo Kishi and Toyonobu Yoshida as a world-class resource for the materials science community. It was initially supported by several materials research societies and was published as a regular peer-reviewed journal. Significant changes occurred in 2008, when the National Institute for Materials Science (NIMS) became solely responsible for all the costs of maintaining the journal. STAM was transformed into an open-access journal published by NIMS in partnership with IOP Publishing. As a result, the publication charges were waived and the entire STAM content, including all back issues, became freely accessible through the IOP Publishing website. The transition has made STAM more competitive and successful in global publication communities, with innovative ideas and approaches. The journal has also changed its publication strategy, aiming to publish a limited number of high-quality articles covering the frontiers of materials science. Special emphasis has been placed on reviews and focus issues, providing recent summaries of hot materials science topics. Publication has become electronic only; however, selected issues are printed and freely distributed at major international scientific events. The Editorial Board has been expanded to include leading experts from all over the world and, together with the Editorial Office, the board members are doing their best to transform STAM into a leading materials science journal. These efforts are paying off, as shown by the rapidly increasing number of article downloads and citations in 2009. I believe that the STAM audience can not only deepen their knowledge in their own specialties but also broaden their horizons in materials science. Ten years of publishing is a significant period for a journal, and STAM has reached an age of maturity. I am certain that STAM will continue to provide important and useful information to its readers for many years to come. Please accept my best wishes for every success in the future.

17 CFR 145.1 - Information published in the Federal Register.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Information published in the... COMMISSION COMMISSION RECORDS AND INFORMATION § 145.1 Information published in the Federal Register. Except as provided in § 145.5, pertaining to nonpublic matters, the following materials shall be published...

New Technologies in Academic Publishing.

ERIC Educational Resources Information Center

Waller, Robert; Lefrere, Paul

1981-01-01

The Open University has become one of the biggest publishing houses in Great Britain. Its course units are produced in a system closely modeled on that of commercial publishers. New technologies in publishing have important educational implications. They can produce up-to-date materials for high level, small population courses. (Author/MLW)

Basics of Desktop Publishing. Second Edition.

ERIC Educational Resources Information Center

Beeby, Ellen; Crummett, Jerrie

This document contains teacher and student materials for a basic course in desktop publishing. Six units of instruction cover the following: (1) introduction to desktop publishing; (2) desktop publishing systems; (3) software; (4) type selection; (5) document design; and (6) layout. The teacher edition contains some or all of the following…

Electronic Publishing and Library Technical Services.

ERIC Educational Resources Information Center

Aveney, Brian

1984-01-01

Trends in electronic editions, on-demand publishing, and online publishing are reviewed and their potential effects on library services and organization are discussed, including library material selection, acquisitions, cataloging, serials, circulation, and home printers. Thirteen references are provided. (EJS)

Systematics of a widely distributed western North American springsnail, Pyrgulopsis micrococcus (Caenogastropoda, Hydrobiidae), with descriptions of three new congeners.

PubMed

Hershler, Robert; Liu, Hsiu-Ping; Bradford, Corbin

2013-01-01

We describe three new species of springsnails (genus Pyrgulopsis) from the Amargosa River basin, California and Nevada (P. licina sp. n., P. perforata sp. n., P. sanchezi sp. n.), each of which was previously considered to be part of P. micrococcus. We also restrict P. micrococcus to its type locality area (Oasis Valley) and redefine a regional congener, P. turbatrix, to include populations from the central Death Valley region and San Bernardino Mountains that had been previously identified as P. micrococcus. The five species treated herein form genetically distinct lineages that differ from each other by 4.2-12.6% for mtCOI and 5.2-13.6% for mtNDI (based on previously published and newly obtained data), and are diagnosable by shell and/or penial characters. The new molecular data presented herein confirm sympatry of P. licina and P. sanchezi in Ash Meadows (consistent with morphological evidence) and delineate an additional lineage of P. micrococcus (in the broad sense) that we do not treat taxonomically owing to the paucity of morphological material. Conservation measures are needed to ensure the long term persistence of populations of P. micrococcus and a genetically differentiated lineage of P. sanchezi which live in disturbed habitats on private lands.

Towards an acoustic model-based poroelastic imaging method: II. experimental investigation.

PubMed

Berry, Gearóid P; Bamber, Jeffrey C; Miller, Naomi R; Barbone, Paul E; Bush, Nigel L; Armstrong, Cecil G

2006-12-01

Soft biological tissue contains mobile fluid. The volume fraction of this fluid and the ease with which it may be displaced through the tissue could be of diagnostic significance and may also have consequences for the validity with which strain images can be interpreted according to the traditional idealizations of elastography. In a previous paper, under the assumption of frictionless boundary conditions, the spatio-temporal behavior of the strain field inside a compressed cylindrical poroelastic sample was predicted (Berry et al. 2006). In this current paper, experimental evidence is provided to confirm these predictions. Finite element modeling was first used to extend the previous predictions to allow for the existence of contact friction between the sample and the compressor plates. Elastographic techniques were then applied to image the time-evolution of the strain inside cylindrical samples of tofu (a suitable poroelastic material) during sustained unconfined compression. The observed experimental strain behavior was found to be consistent with the theoretical predictions. In particular, every sample studied confirmed that reduced values of radial strain advance with time from the curved cylindrical surface inwards towards the axis of symmetry. Furthermore, by fitting the predictions of an analytical model to a time sequence of strain images, parametric images of two quantities, each related to one or more of three poroelastic material constants were produced. The two parametric images depicted the Poisson's ratio (nu(s)) of the solid matrix and the product of the aggregate modulus (H(A)) of the solid matrix with the permeability (k) of the solid matrix to the pore fluid. The means of the pixel values in these images, nu(s) = 0.088 (standard deviation 0.023) and H(A)k = 1.449 (standard deviation 0.269) x 10(-7) m(2) s(-1), were in agreement with values derived from previously published data for tofu (Righetti et al. 2005). The results provide the first experimental detection of the fluid-flow-induced characteristic diffusion-like behavior of the strain in a compressed poroelastic material and allow parameters related to the above material constants to be determined. We conclude that it may eventually be possible to use strain data to detect and measure characteristics of diffusely distributed mobile fluid in tissue spaces that are too small to be imaged directly.

An accurate fatigue damage model for welded joints subjected to variable amplitude loading

NASA Astrophysics Data System (ADS)

Aeran, A.; Siriwardane, S. C.; Mikkelsen, O.; Langen, I.

2017-12-01

Researchers in the past have proposed several fatigue damage models to overcome the shortcomings of the commonly used Miner’s rule. However, requirements of material parameters or S-N curve modifications restricts their practical applications. Also, application of most of these models under variable amplitude loading conditions have not been found. To overcome these restrictions, a new fatigue damage model is proposed in this paper. The proposed model can be applied by practicing engineers using only the S-N curve given in the standard codes of practice. The model is verified with experimentally derived damage evolution curves for C 45 and 16 Mn and gives better agreement compared to previous models. The model predicted fatigue lives are also in better correlation with experimental results compared to previous models as shown in earlier published work by the authors. The proposed model is applied to welded joints subjected to variable amplitude loadings in this paper. The model given around 8% shorter fatigue lives compared to Eurocode given Miner’s rule. This shows the importance of applying accurate fatigue damage models for welded joints.

Extending the solvent-free MALDI sample preparation method.

PubMed

Hanton, Scott D; Parees, David M

2005-01-01

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry is an important technique to characterize many different materials, including synthetic polymers. MALDI mass spectral data can be used to determine the polymer average molecular weights, repeat units, and end groups. One of the key issues in traditional MALDI sample preparation is making good solutions of the analyte and the matrix. Solvent-free sample preparation methods have been developed to address these issues. Previous results of solvent-free or dry prepared samples show some advantages over traditional wet sample preparation methods. Although the results of the published solvent-free sample preparation methods produced excellent mass spectra, we found the method to be very time-consuming, with significant tool cleaning, which presents a significant possibility of cross contamination. To address these issues, we developed an extension of the solvent-free method that replaces the mortar and pestle grinding with ball milling the sample in a glass vial with two small steel balls. This new method generates mass spectra with equal quality of the previous methods, but has significant advantages in productivity, eliminates cross contamination, and is applicable to liquid and soft or waxy analytes.

Efficient production of a folded and functional, highly disulfide-bonded beta-helix antifreeze protein in bacteria.

PubMed

Bar, Maya; Bar-Ziv, Roy; Scherf, Tali; Fass, Deborah

2006-08-01

The Tenebrio molitor thermal hysteresis protein has a cysteine content of 19%. This 84-residue protein folds as a compact beta-helix, with eight disulfide bonds buried in its core. Exposed on one face of the protein is an array of threonine residues, which constitutes the ice-binding face. Previous protocols for expression of this protein in recombinant expression systems resulted in inclusion bodies or soluble but largely inactive material. A long and laborious refolding procedure was performed to increase the fraction of active protein and isolate it from inactive fractions. We present a new protocol for production of fully folded and active T. molitor thermal hysteresis protein in bacteria, without the need for in vitro refolding. The protein coding sequence was fused to those of various carrier proteins and expressed at low temperature in a bacterial strain specially suited for production of disulfide-bonded proteins. The product, after a simple and robust purification procedure, was analyzed spectroscopically and functionally and was found to compare favorably to previously published data on refolded protein and protein obtained from its native source.

The use of genetic programming to develop a predictor of swash excursion on sandy beaches

NASA Astrophysics Data System (ADS)

Passarella, Marinella; Goldstein, Evan B.; De Muro, Sandro; Coco, Giovanni

2018-02-01

We use genetic programming (GP), a type of machine learning (ML) approach, to predict the total and infragravity swash excursion using previously published data sets that have been used extensively in swash prediction studies. Three previously published works with a range of new conditions are added to this data set to extend the range of measured swash conditions. Using this newly compiled data set we demonstrate that a ML approach can reduce the prediction errors compared to well-established parameterizations and therefore it may improve coastal hazards assessment (e.g. coastal inundation). Predictors obtained using GP can also be physically sound and replicate the functionality and dependencies of previous published formulas. Overall, we show that ML techniques are capable of both improving predictability (compared to classical regression approaches) and providing physical insight into coastal processes.

Electronic astronomical information handling and flexible publishing.

NASA Astrophysics Data System (ADS)

Heck, A.

The current dramatic evolution in information technology is bringing major modifications in the way scientists work and communicate. The concept of electronic information handling encompasses the diverse types of information, the different media, as well as the various communication methodologies and technologies. It ranges from the very collection of data until the final publication of results and sharing of knowledge. New problems and challenges result also from the new information culture, especially on legal, ethical, and educational grounds. Electronic publishing will have to diverge from an electronic version of contributions on paper and will be part of a more general flexible-publishing policy. The benefits of private publishing are questioned. The procedures for validating published material and for evaluating scientific activities will have to be adjusted too. Provision of electronic refereed information independently from commercial publishers in now feasible. Scientists and scientific institutions have now the possibility to run an efficient information server with validated (refereed) material without the help of a commercial publishers.

Focus issue: teaching tools and learning opportunities.

PubMed

Gough, Nancy R

2010-04-27

Science Signaling provides authoring experience for students and resources for educators. Students experience the writing and revision process involved in authoring short commentary articles that are published in the Journal Club section. By publishing peer-reviewed teaching materials, Science Signaling provides instructors with feedback that improves their materials and an outlet to share their tips and techniques and digital resources with other teachers.

Preliminary Multivariable Cost Model for Space Telescopes

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2010-01-01

Parametric cost models are routinely used to plan missions, compare concepts and justify technology investments. Previously, the authors published two single variable cost models based on 19 flight missions. The current paper presents the development of a multi-variable space telescopes cost model. The validity of previously published models are tested. Cost estimating relationships which are and are not significant cost drivers are identified. And, interrelationships between variables are explored

Shielding requirements for constant-potential diagnostic x-ray beams determined by a Monte Carlo calculation.

PubMed

Simpkin, D J

1989-02-01

A Monte Carlo calculation has been performed to determine the transmission of broad constant-potential x-ray beams through Pb, concrete, gypsum wallboard, steel and plate glass. The EGS4 code system was used with a simple broad-beam geometric model to generate exposure transmission curves for published 70, 100, 120 and 140-kVcp x-ray spectra. These curves are compared to measured three-phase generated x-ray transmission data in the literature and found to be reasonable. For calculation ease the data are fit to an equation previously shown to describe such curves quite well. These calculated transmission data are then used to create three-phase shielding tables for Pb and concrete, as well as other materials not available in Report No. 49 of the NCRP.

Dynamical effects in x-ray absorption spectra of graphene and monolayered h -BN on Ni(111)

NASA Astrophysics Data System (ADS)

Rusz, J.; Preobrajenski, A. B.; Ng, May Ling; Vinogradov, N. A.; Mårtensson, N.; Wessely, O.; Sanyal, B.; Eriksson, O.

2010-02-01

We present first-principles calculations of x-ray absorption spectra of graphene and hexagonal BN monolayer on the Ni(111) substrate. Including dynamical core-hole screening effects according to the theory of Mahan-Nozières-de Dominics (MND) results in an overall good agreement with previously published experimental data and our new observations. This approach provides a unified first-principles description of the electronic structure and core excitations in the sp2 -bonded materials on metal surfaces and a better insight into the dynamics of screening effects. We demonstrate in particular that the observed spectral features of graphene and hexagonal BN can be well reproduced with the MND theory, and that they are determined by a delicate balance between initial and final-state effects.

New DMFT capabilities in CASTEP

NASA Astrophysics Data System (ADS)

Plekhanov, Evgeny; Sacksteder, Vincent; Hasnip, Phil; Probert, Matt; Clark, Stewart; Weber, Cedric; Refson, Keith

We present the first implementation of Dynamical Mean-Field Theory in UK's major ab-initio code CASTEP. This implementation: i) is modular; ii) allows great flexibility in choosing local basis set for downfolding/upfolding of self-energy; iii) permits wide choice of impurity solvers (including external solver libraries); and iv) gives the user a possibility to use several self-consistency schemes and calculate total energy and forces. We explain in details the theoretical framework used. We benchmark our implementation on several strongly-correlated insulating systems with d- and f-shells: γ-Ce and Ce2O3 by using Hubbard I and CTHYB-QMC solvers. Our results appear to be in excellent agreement with the reference data published previously in the literature. EPSRC-funded project ''Strong Correlation meets Materials Modelling: DMFT and GW in CASTEP''.

Generalized Effective Medium Theory for Particulate Nanocomposite Materials

PubMed Central

Siddiqui, Muhammad Usama; Arif, Abul Fazal M.

2016-01-01

The thermal conductivity of particulate nanocomposites is strongly dependent on the size, shape, orientation and dispersion uniformity of the inclusions. To correctly estimate the effective thermal conductivity of the nanocomposite, all these factors should be included in the prediction model. In this paper, the formulation of a generalized effective medium theory for the determination of the effective thermal conductivity of particulate nanocomposites with multiple inclusions is presented. The formulated methodology takes into account all the factors mentioned above and can be used to model nanocomposites with multiple inclusions that are randomly oriented or aligned in a particular direction. The effect of inclusion dispersion non-uniformity is modeled using a two-scale approach. The applications of the formulated effective medium theory are demonstrated using previously published experimental and numerical results for several particulate nanocomposites. PMID:28773817

Serum toxicokinetics after intravenous and oral dosing of larkspur toxins in goats.

PubMed

Welch, K D; Gardner, D R; Stonecipher, C A; Green, B T; Pfister, J A

2017-07-01

Poisoning of cattle by larkspur plants (Delphinium spp.) is a concern for cattle ranchers in western North America. Previous research studies have evaluated the toxicokinetic profile of multiple larkspur toxins in several livestock species. However, those studies were all performed by orally dosing plant material. Consequently some toxicokinetic parameters could not be definitively determined. In this study, we compared the serum toxicokinetic profile of the larkspur alkaloids methyllycaconitine (MLA) and deltaline in goats dosed both IV and via oral gavage. The results from this study indicate that the toxic alkaloids in larkspurs undergo flip-flop kinetics, meaning the rate of absorption of the alkaloids is slower than the rate of elimination. The implications of flip-flop kinetics in treating animals poisoned by larkspur is discussed. Published by Elsevier Ltd.

Decades-long changes of the interstellar wind through our solar system.

PubMed

Frisch, P C; Bzowski, M; Livadiotis, G; McComas, D J; Moebius, E; Mueller, H-R; Pryor, W R; Schwadron, N A; Sokół, J M; Vallerga, J V; Ajello, J M

2013-09-06

The journey of the Sun through the dynamically active local interstellar medium creates an evolving heliosphere environment. This motion drives a wind of interstellar material through the heliosphere that has been measured with Earth-orbiting and interplanetary spacecraft for 40 years. Recent results obtained by NASA's Interstellar Boundary Explorer mission during 2009-2010 suggest that neutral interstellar atoms flow into the solar system from a different direction than found previously. These prior measurements represent data collected from Ulysses and other spacecraft during 1992-2002 and a variety of older measurements acquired during 1972-1978. Consideration of all data types and their published results and uncertainties, over the three epochs of observations, indicates that the trend for the interstellar flow ecliptic longitude to increase linearly with time is statistically significant.

Mechanical and degradation property improvement in a biocompatible Mg-Ca-Sr alloy by thermomechanical processing.

PubMed

Henderson, Hunter B; Ramaswamy, Vidhya; Wilson-Heid, Alexander E; Kesler, Michael S; Allen, Josephine B; Manuel, Michele V

2018-04-01

Magnesium-based alloys have attracted interest as a potential material to comprise biomedical implants that are simultaneously high-strength and temporary, able to provide stabilization before degrading safely and able to be excreted by the human body. Many alloy systems have been evaluated, but this work reports on improved properties through hot extrusion of one promising alloy: Mg-1.0 wt% Ca-0.5 wt%Sr. This alloy has previously demonstrated promising toxicity and degradation properties in the as-cast and rolled conditions. In the current study extrusion causes a dramatic improvement in the mechanical properties in tension and compression, as well as a low in vitro degradation rate. Microstructure (texture, second phase distribution, and grain size), bulk mechanical properties, flow behavior, degradation in simulated body fluid, and effect on osteoblast cyctotoxicity are evaluated and correlated to extrusion temperature. Maximum yield strength of 300 MPa (above that of annealed 316 stainless steel) with 10% elongation is observed, making this alloy competitive with existing implant materials. Copyright © 2018 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Global geologic map of Ganymede

USGS Publications Warehouse

Collins, Geoffrey C.; Patterson, G. Wesley; Head, James W.; Pappalardo, Robert T.; Prockter, Louise M.; Lucchitta, Baerbel K.; Kay, Johnathan P.

2014-01-01

Ganymede is the largest satellite of Jupiter, and its icy surface has been formed through a variety of impact cratering, tectonic, and possibly cryovolcanic processes. The history of Ganymede can be divided into three distinct phases: an early phase dominated by impact cratering and mixing of non-ice materials in the icy crust, a phase in the middle of its history marked by great tectonic upheaval, and a late quiescent phase characterized by a gradual drop in heat flow and further impact cratering. Images of Ganymede suitable for geologic mapping were collected during the flybys of Voyager 1 and Voyager 2 (1979), as well as during the Galileo Mission in orbit around Jupiter (1995–2003). This map represents a synthesis of our understanding of Ganymede geology after the conclusion of the Galileo Mission. We summarize the properties of the imaging dataset used to construct the map, previously published maps of Ganymede, our own mapping rationale, and the geologic history of Ganymede. Additional details on these topics, along with detailed descriptions of the type localities for the material units, may be found in the companion paper to this map (Patterson and others, 2010).

Non-destructive testing techniques for the forensic engineering investigation of reinforced concrete buildings.

PubMed

Hobbs, Brian; Tchoketch Kebir, Mohamed

2007-04-11

This study describes in detail the results of a laboratory investigation where the compressive strength of 150mm side-length cubes was evaluated. Non-destructive testing (NDT) was carried out using ultrasonic pulse velocity (UPV) and impact rebound hammer (IRH) techniques to establish a correlation with the compressive strengths of compression tests. To adapt the Schmidt hammer apparatus and the ultrasonic pulse velocity tester to the type of concrete used in Algeria, concrete mix proportions that are recommended by the Algerian code were chosen. The resulting correlation curve for each test is obtained by changing the level of compaction, water/cement ratio and concrete age of specimens. Unlike other works, the research highlights the significant effect of formwork material on surface hardness of concrete where two different mould materials for specimens were used (plastic and wood). A combined method for the above two tests, reveals an improvement in the strength estimation of concrete. The latter shows more improvement by including the concrete density. The resulting calibration curves for strength estimation were compared with others from previous published literature.

Shape and size engineered cellulosic nanomaterials as broad spectrum anti-microbial compounds.

PubMed

Sharma, Priyanka R; Kamble, Sunil; Sarkar, Dhiman; Anand, Amitesh; Varma, Anjani J

2016-06-01

Oxidized celluloses have been used for decades as antimicrobial wound gauzes and surgical cotton. We now report the successful synthesis of a next generation narrow size range (25-35nm) spherical shaped nanoparticles of 2,3,6-tricarboxycellulose based on cellulose I structural features, for applications as new antimicrobial materials. This study adds to our previous study of 6-carboxycellulose. A wide range of bacteria such as Escherichia coli, Staphloccocus aureus, Bacillus subtilis and Mycobacterium tuberculosis (non-pathogenic as well as pathogenic strains) were affected by these polymers in in vitro studies. Activity against Mycobacteria were noted at high concentrations (MIC99 values 250-1000μg/ml, as compared to anti-TB drug Isoniazid 0.3μg/ml). However, the broad spectrum activity of oxidized celluloses and their nanoparticles against a wide range of bacteria, including Mycobacteria, show that these materials are promising new biocompatible and biodegradable drug delivery vehicles wherein they can play the dual role of being a drug encapsulant as well as a broad spectrum anti-microbial and anti-TB drug. Copyright © 2016. Published by Elsevier B.V.

Supplemental Journal Article Materials: A progress report on an information industry initiative

NASA Astrophysics Data System (ADS)

Schwarzman, A. B.

2011-12-01

Who could possibly quibble with the idea of publishing supplemental materials to a journal article? Making them available makes it possible for the Earth and space scientists to demonstrate supporting evidence, such as multimedia, computer programs, and datasets; gives the authors the opportunity to present in-depth studies that would not otherwise be available; and enables the readers to replicate experiments and verify their results. However, the scholarly publishing ecosystem is now being threatened by a veritable tsunami of supplemental materials that have to be peer reviewed, identified, described, and made discoverable and citeable; such materials also have to be archived, preserved, and perpetually converted to the contemporary formats to be available to a future researcher. Moreover, the readers often have no clear indication of how critical a particular supplemental material is to the scientific conclusions of the article and thus are not sure whether they should spend their time reading/viewing/running it. In some cases it is not even clear what the material actually supplements. While one segment of the research community argues that even more supplemental materials should be made available, another segment increasingly voices its concern stating categorically that a research article is not a data dump or an FTP site. From the publisher's perspective, dealing with supplemental materials in a responsible fashion is becoming an increasingly costly proposition. Faced with formidable challenges of managing supplemental materials, the information profession community in 2010 formed a joint NISO/NFAIS Working Group to develop Recommended Practices for curating supplemental materials during their life cycle, including but not limited to their selection, peer review, editing, production, presentation, providing context, identification, linking, citing, hosting, discovery, metadata and markup, packaging, accessibility, and preservation. The Recommended Practices also intend to address roles and responsibilities of authors, editors, peer reviewers, publishers, libraries, abstracting and indexing services, and official data centers and institutional repositories. Finally, the document is going to contain broad principles and detailed technical implementation related to metadata, linking, packaging, and accessibility of supplemental materials. In this presentation, a co-chair of the NISO/NFAIS Working Group will report on the Group's latest progress in developing the Recommended Practices for Supplemental Journal Article Materials.

Photochromic molecular implementations of universal computation.

PubMed

Chaplin, Jack C; Krasnogor, Natalio; Russell, Noah A

2014-12-01

Unconventional computing is an area of research in which novel materials and paradigms are utilised to implement computation. Previously we have demonstrated how registers, logic gates and logic circuits can be implemented, unconventionally, with a biocompatible molecular switch, NitroBIPS, embedded in a polymer matrix. NitroBIPS and related molecules have been shown elsewhere to be capable of modifying many biological processes in a manner that is dependent on its molecular form. Thus, one possible application of this type of unconventional computing is to embed computational processes into biological systems. Here we expand on our earlier proof-of-principle work and demonstrate that universal computation can be implemented using NitroBIPS. We have previously shown that spatially localised computational elements, including registers and logic gates, can be produced. We explain how parallel registers can be implemented, then demonstrate an application of parallel registers in the form of Turing machine tapes, and demonstrate both parallel registers and logic circuits in the form of elementary cellular automata. The Turing machines and elementary cellular automata utilise the same samples and same hardware to implement their registers, logic gates and logic circuits; and both represent examples of universal computing paradigms. This shows that homogenous photochromic computational devices can be dynamically repurposed without invasive reconfiguration. The result represents an important, necessary step towards demonstrating the general feasibility of interfacial computation embedded in biological systems or other unconventional materials and environments. Copyright © 2014 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Guidelines for cytopathologic diagnosis of epithelioid and mixed type malignant mesothelioma. Complementary statement from the International Mesothelioma Interest Group, also endorsed by the International Academy of Cytology and the Papanicolaou Society of Cytopathology

PubMed Central

Hjerpe, Anders; Ascoli, Valeria; Bedrossian, Carlos; Boon, Mathilde; Creaney, Jenette; Davidson, Ben; Dejmek, Annika; Dobra, Katalin; Fassina, Ambrogio; Field, Andrew; Firat, Pinar; Kamei, Toshiaki; Kobayashi, Tadao; Michael, Claire W.; Önder, Sevgen; Segal, Amanda; Vielh, Philippe

2015-01-01

To provide practical guidelines for the cytopathologic diagnosis of malignant mesothelioma (MM). Cytopathologists involved in the International Mesothelioma Interest Group (IMIG) and the International Academy of Cytology (IAC), who have an interest in the field contributed to this update. Reference material includes peer-reviewed publications and textbooks. This article is the result of discussions during and after the IMIG 2012 conference in Boston, followed by thorough discussions during the 2013 IAC meeting in Paris. Additional contributions have been obtained from cytopathologists and scientists, who could not attend these meetings, with final discussions and input during the IMIG 2014 conference in cape town. During the previous IMIG biennial meetings, thorough discussions have resulted in published guidelines for the pathologic diagnosis of MM. However, previous recommendations have stated that the diagnosis of MM should be based on histological material only.[12] Accumulating evidence now indicates that the cytological diagnosis of MM supported by ancillary techniques is as reliable as that based on histopathology, although the sensitivity with cytology may be somewhat lower.[345] Recognizing that noninvasive diagnostic modalities benefit both the patient and the health system, future recommendations should include cytology as an accepted method for the diagnosis of this malignancy.[67] The article describes the consensus of opinions of the authors on how cytology together with ancillary testing can be used to establish a reliable diagnosis of MM. PMID:26681974

Performance Evaluation of Advanced Retrofit Roof Technologies Using Field-Test Data Phase Three Final Report, Volume 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biswas, Kaushik; Childs, Phillip W.; Atchley, Jerald Allen

2015-01-01

This article presents some miscellaneous data from two low-slope and two steep-slope experimental roofs. The low-slope roofs were designed to compare the performance of various roof coatings exposed to natural weatherization. The steep-slope roofs contained different combinations of phase change material, rigid insulation, low emittance surface and above-sheathing ventilation, with standing-seam metal panels on top. The steep-slope roofs were constructed on a series of adjacent attics separated at the gables using thick foam insulation. This article describes phase three (3) of a study that began in 2009 to evaluate the energy benefits of a sustainable re-roofing technology utilizing standing-seam metalmore » roofing panels combined with energy efficient features like above-sheathing-ventilation (ASV), phase change material (PCM) and rigid insulation board. The data from phases 1 and 2 have been previously published and reported [Kosny et al., 2011; Biswas et al., 2011; Biswas and Childs, 2012; Kosny et al., 2012]. Based on previous data analyses and discussions within the research group, additional test roofs were installed in May 2012, to test new configurations and further investigate different components of the dynamic insulation systems. Some experimental data from phase 3 testing from May 2012 to December 2013 and some EnergyPlus modeling results have been reported in volumes 1 and 3, respectively, of the final report [Biswas et al., 2014; Biswas and Bhandari, 2014].« less

Radiation Durability of Candidate Polymer Films for the Next Generation Space Telescope Sunshield

NASA Technical Reports Server (NTRS)

Dever, Joyce; Semmel, Charles; Edwards, David; Messer, Russell; Peters, Wanda; Carter, Amani; Puckett, David

2002-01-01

The Next Generation Space Telescope (NGST), anticipated to be launched in 2009 for a 10-year mission, will make observations in the infrared portion of the spectrum to examine the origins and evolution of our universe. Because it must operate at cold temperatures in order to make these sensitive measurements, it will use a large, lightweight, deployable sunshield, comprised of several polymer film layers, to block heat and stray light. This paper describes laboratory radiation durability testing of candidate NGST sunshield polymer film materials. Samples of fluorinated polyimides CP1 and CP2, and a polvarylene ether benzimidazole. TOR-LM(TM), were exposed to 40 keV electron and 40 keV proton radiation followed by exposure to vacuum ultraviolet (VUV) radiation in the 115 to 200 nm wavelength range. Samples of these materials were also exposed to VUV without prior electron and proton exposure. Samples of polyimides Kapton HN, Kapton E, and Upilex-S were exposed to electrons and protons only, due to limited available exposure area in the VUV facility. Exposed samples were evaluated for changes in solar absorptance and thermal emittance and mechanical properties of ultimate tensile strength and elongation at failure. Data obtained are compared with previously published data for radiation durability testing of these polymer film materials.

Are We Underestimating Microplastic Contamination in Aquatic Environments?

NASA Astrophysics Data System (ADS)

Conkle, Jeremy L.; Báez Del Valle, Christian D.; Turner, Jeffrey W.

2018-01-01

Plastic debris, specifically microplastic in the aquatic environment, is an escalating environmental crisis. Efforts at national scales to reduce or ban microplastics in personal care products are starting to pay off, but this will not affect those materials already in the environment or those that result from unregulated products and materials. To better inform future microplastic research and mitigation efforts this study (1) evaluates methods currently used to quantify microplastics in the environment and (2) characterizes the concentration and size distribution of microplastics in a variety of products. In this study, 50 published aquatic surveys were reviewed and they demonstrated that most ( 80%) only account for plastics ≥ 300 μm in diameter. In addition, we surveyed 770 personal care products to determine the occurrence, concentration and size distribution of polyethylene microbeads. Particle concentrations ranged from 1.9 to 71.9 mg g-1 of product or 1649 to 31,266 particles g-1 of product. The large majority ( > 95%) of particles in products surveyed were less than the 300 μm minimum diameter, indicating that previous environmental surveys could be underestimating microplastic contamination. To account for smaller particles as well as microfibers from synthetic textiles, we strongly recommend that future surveys consider methods that materials < 300 μm in diameter.

Synchrotron-based analysis of chromium distributions in multicrystalline silicon for solar cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jensen, Mallory Ann; Hofstetter, Jasmin; Morishige, Ashley E.

Chromium (Cr) can degrade silicon wafer-based solar cell efficiencies at concentrations as low as 10(10) cm(-3). In this contribution, we employ synchrotron-based X-ray fluorescence microscopy to study chromium distributions in multicrystalline silicon in as-grown material and after phosphorous diffusion. We complement quantified precipitate size and spatial distribution with interstitial Cr concentration and minority carrier lifetime measurements to provide insight into chromium gettering kinetics and offer suggestions for minimizing the device impacts of chromium. We observe that Cr-rich precipitates in as-grown material are generally smaller than iron-rich precipitates and that Cri point defects account for only one-half of the total Crmore » in the as-grown material. This observation is consistent with previous hypotheses that Cr transport and CrSi2 growth are more strongly diffusion-limited during ingot cooling. We apply two phosphorous diffusion gettering profiles that both increase minority carrier lifetime by two orders of magnitude and reduce [Cr-i] by three orders of magnitude to approximate to 10(10) cm(-3). Some Cr-rich precipitates persist after both processes, and locally high [Cri] after the high-temperature process indicates that further optimization of the chromium gettering profile is possible. (C) 2015 AIP Publishing LLC.« less

Evaluation of elemental profiling methods, including laser-induced breakdown spectroscopy (LIBS), for the differentiation of Cannabis plant material grown in different nutrient solutions.

PubMed

El-Deftar, Moteaa M; Robertson, James; Foster, Simon; Lennard, Chris

2015-06-01

Laser-induced breakdown spectroscopy (LIBS) is an emerging atomic emission based solid sampling technique that has many potential forensic applications. In this study, the analytical performance of LIBS, as well as that of inductively coupled plasma mass spectrometry (ICP-MS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and X-ray microfluorescence (μXRF), was evaluated for the ability to conduct elemental analyses on Cannabis plant material, with a specific investigation of the possible links between hydroponic nutrients and elemental profiles from associated plant material. No such study has been previously published in the literature. Good correlation among the four techniques was observed when the concentrations or peak areas of the elements of interest were monitored. For Cannabis samples collected at the same growth time, the elemental profiles could be related to the use of particular commercial nutrients. In addition, the study demonstrated that ICP-MS, LA-ICP-MS and LIBS are suitable techniques for the comparison of Cannabis samples from different sources, with high discriminating powers being achieved. On the other hand, μXRF method was not suitable for the discrimination of Cannabis samples originating from different growth nutrients. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Is there any relationship between proinflammatory mediator levels in disc material and myelopathy with cervical disc herniation and spondylosis? A non-randomized, prospective clinical study

PubMed Central

Asir, Alparslan; Cetinkal, Ahmet; Gedik, Nursal; Kutlay, Ahmet Murat; Çolak, Ahmet; Kurtar, Sedat; Simsek, Hakan

2007-01-01

The proinflammatory mediator (PIM) levels were assessed in surgically removed samples of herniated cervical intervertebral discs. The objective of this study was to investigate if there is a correlation between the levels of PIMs in disc material and myelopathy associated with cervical intervertebral disc herniation and spondylosis. The role of proinflammatory mediators in the degeneration of intervertebral disc and the inflammatory effects of disc herniations on radicular pain has been previously published. However, the possible relationship between PIMs and myelopathy related to cervical disc herniation and spondylosis has not been investigated before. Thirty-two patients undergoing surgery for cervical disc herniation and spondylosis were investigated. Surgically obtained disc materials, stored at 70°C, were classified into two groups: cervical disc herniation alone or with myelopathy. Biochemical preparation and solid phase enzyme amplified sensitivity immunoassay (ELISIA) analysis of the samples were performed to assess the concentration of mediators in the samples. Very similar values of interleukin-6 were found in both groups whereas the concentrations of mediators were significantly higher in myelopathy group. This study has demonstrated that PIMs are involved in cervical intervertebral disc degeneration with higher concentrations in the samples associated with myelopathy. PMID:17476536

Explaining the impact of poverty on old-age frailty in Europe: material, psychosocial and behavioural factors.

PubMed

Stolz, Erwin; Mayerl, Hannes; Waxenegger, Anja; Freidl, Wolfgang

2017-12-01

Previous research found poverty to be associated with adverse health outcomes among older adults but the factors that translate low economic resources into poor physical health are not well understood. The goal of this analysis was to assess the impact of material, psychosocial, and behavioural factors as well as education in explaining the poverty-health link. In total, 28 360 observations from 11 390 community-dwelling respondents (65+) in the Survey of Health, Ageing and Retirement in Europe (2004-13, 10 countries) were analysed. Multilevel growth curve models were used to assess the impact of combined income and asset poverty risk on old-age frailty (frailty index) and associated pathway variables. In total, 61.8% of the variation of poverty risk on frailty level was explained by direct and indirect effects. Results stress the role of material and particularly psychosocial factors such as perceived control and social isolation, whereas the role of health behaviour was negligible. We suggest to strengthen social policy and public health efforts in order to fight poverty and its deleterious health effects from early age on as well as to broaden the scope of interventions with regard to psychosocial factors. © The Author 2017. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morris, E.B.

The Title List of Documents Made Publicly Available is a monthly publication. It describes the information received and published by the U.S. Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) non-docketed material received and published by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and amore » Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979.« less

The Materials Data Facility: Data Services to Advance Materials Science Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blaiszik, B.; Chard, K.; Pruyne, J.

2016-07-06

With increasingly strict data management requirements from funding agencies and institutions, expanding focus on the challenges of research replicability, and growing data sizes and heterogeneity, new data needs are emerging in the materials community. The materials data facility (MDF) operates two cloudhosted services, data publication and data discovery, with features to promote open data sharing, self-service data publication and curation, and encourage data reuse, layered with powerful data discovery tools. The data publication service simplifies the process of copying data to a secure storage location, assigning data a citable persistent identifier, and recording custom (e.g., material, technique, or instrument specific)andmore » automatically-extractedmetadata in a registrywhile the data discovery service will provide advanced search capabilities (e.g., faceting, free text range querying, and full text search) against the registered data and metadata. TheMDF services empower individual researchers, research projects, and institutions to (I) publish research datasets, regardless of size, from local storage, institutional data stores, or cloud storage, without involvement of thirdparty publishers; (II) build, share, and enforce extensible domain-specific custom metadata schemas; (III) interact with published data and metadata via representational state transfer (REST) application program interfaces (APIs) to facilitate automation, analysis, and feedback; and (IV) access a data discovery model that allows researchers to search, interrogate, and eventually build on existing published data. We describe MDF’s design, current status, and future plans.« less

The Materials Data Facility: Data Services to Advance Materials Science Research

NASA Astrophysics Data System (ADS)

Blaiszik, B.; Chard, K.; Pruyne, J.; Ananthakrishnan, R.; Tuecke, S.; Foster, I.

2016-08-01

With increasingly strict data management requirements from funding agencies and institutions, expanding focus on the challenges of research replicability, and growing data sizes and heterogeneity, new data needs are emerging in the materials community. The materials data facility (MDF) operates two cloud-hosted services, data publication and data discovery, with features to promote open data sharing, self-service data publication and curation, and encourage data reuse, layered with powerful data discovery tools. The data publication service simplifies the process of copying data to a secure storage location, assigning data a citable persistent identifier, and recording custom (e.g., material, technique, or instrument specific) and automatically-extracted metadata in a registry while the data discovery service will provide advanced search capabilities (e.g., faceting, free text range querying, and full text search) against the registered data and metadata. The MDF services empower individual researchers, research projects, and institutions to (I) publish research datasets, regardless of size, from local storage, institutional data stores, or cloud storage, without involvement of third-party publishers; (II) build, share, and enforce extensible domain-specific custom metadata schemas; (III) interact with published data and metadata via representational state transfer (REST) application program interfaces (APIs) to facilitate automation, analysis, and feedback; and (IV) access a data discovery model that allows researchers to search, interrogate, and eventually build on existing published data. We describe MDF's design, current status, and future plans.

Title list of documents made publicly available, April 1--30 1997, Vol. 19, No. 4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morris, E.B.

This report describes the information received and published by the U.S. Nuclear Regulatory Commission (NRC). This information includes: (1) material associated with civilian nuclear power plants and other uses of radioactive materials and (2) material received and published by NRC pertinent to its role as a regulatory agency. In this report, 7 items of the first type are included, and 25 regulatory type items are listed. The report is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index.

Plasma rich in growth factors had limited effect on early bone formation in extraction sockets: Response to "Anitua, E., Alkhraisat, M.H. & Orive, G. (2013) Letter to the Editor: Rigorous methodology is the school of coherent conclusions in science. European Journal of Oral Implantology 6: 9-11.".

PubMed

Farina, Roberto; Bressan, Eriberto; Taut, Andrei; Cucchi, Alessandro; Trombelli, Leonardo

2014-10-01

To address the criticisms raised by Anitua et al. (European Journal of Oral Implantology, 6, 2013, 9-11) to the article "Plasma Rich in Growth Factors (PRGF) in Human Post-Extraction Sockets: an Histological and Histomorphometric Study.", recently published by Farina and colleagues (Clinical Oral Implants Research 2012; doi: 10.1111/clr.12033). All the methodological aspects criticized in the letter by Anitua et al. were thoroughly reconsidered and discussed in a structured short communication. When indicated, pertinent, additional material was included to reinforce our considerations. As most clinical studies in implant dentistry, including previous studies evaluating the efficacy/effectiveness of PRGF, the study by Farina et al. has some limitations. However, it is currently the only published controlled trial using quantitative parameters related to PRGF-induced early bone formation. Despite all limitations, the results of the study by Farina et al., which were based on different quantitative parameters (micro-CT scan, immunohistochemical markers of wound healing and bone deposition), indicated a limited effect of PRGF on early bone formation in extraction sockets. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Getting It Published: The Pleasures and Pitfalls of Self-Publishing.

ERIC Educational Resources Information Center

Wahab, Shaista; Boyer, Janice

Although many methods of publishing scholarly work are available to the author, self-publishing is sometimes the most appropriate avenue to provide the work to the intended audience particularly if the scope of the material is of interest to a limited number of scholars. Topics include: copyright issues; cataloging data; factors influencing the…

Patterns of Change within the Publishing Industry.

ERIC Educational Resources Information Center

Sirianni, F. J.

This is one of several papers presented at a Federal Trade Commission Symposium on Media Concentration. It reviews the controversy between book publishers and the Authors Guild concerning the control of already published materials and the future of publishing, and it analyzes the market structure in order to put the issues into perspective. Some…

A Descriptive Review of Commercial Bilingual Materials.

ERIC Educational Resources Information Center

Criscoe, Betty L.; Amandes, Jo

This review of commercial bilingual materials lists materials produced by sixty-six publishing houses and other educational suppliers. The materials are listed in order of the company that produces them, and are designed to be used with Spanish-speaking children. Materials listed include books, films, records, cassettes, and kits, and are printed…

Peer review statement

NASA Astrophysics Data System (ADS)

2018-05-01

All papers published in this volume of IOP Conference Series: Materials Science and Engineering have been peer reviewed through processes administered by the proceedings Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing.

Peer review statement

NASA Astrophysics Data System (ADS)

2017-11-01

All papers published in this volume of IOP Conference Series: Materials Science and Engineering have been peer reviewed through processes administered by the proceedings Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing.

Peer review statement

NASA Astrophysics Data System (ADS)

2017-10-01

All papers published in this volume of IOP Conference Series: Materials Science and Engineering have been peer reviewed through processes administered by the proceedings Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing.

Peer review statement

NASA Astrophysics Data System (ADS)

2017-09-01

All papers published in this volume of IOP Conference Series: Materials Science and Engineering have been peer reviewed through processes administered by the proceedings Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing.

Peer review statement

NASA Astrophysics Data System (ADS)

2018-02-01

All papers published in this volume of IOP Conference Series: Materials Science and Engineering have been peer reviewed through processes administered by the proceedings Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing.

Peer review statement

NASA Astrophysics Data System (ADS)

2017-12-01

All papers published in this volume of IOP Conference Series: Materials Science and Engineering have been peer reviewed through processes administered by the proceedings Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing.

Peer review statement

NASA Astrophysics Data System (ADS)

2018-03-01

All papers published in this volume of IOP Conference Series: Materials Science and Engineering have been peer reviewed through processes administered by the proceedings Editors. Reviews were conducted by expert referees to the professional and scientific standards expected of a proceedings journal published by IOP Publishing.

Writing and Publishing Handbook.

ERIC Educational Resources Information Center

Hansen, William F., Ed.

Intended to provide guidance in academic publishing to faculty members, especially younger faculty members, this handbook is a compilation of four previously published essays by different authors. Following a preface and an introduction, the four essays and their authors are as follows: (1) "One Writer's Secrets" (Donald M. Murray); (2)…

Quantifying uncertainty in carbon and nutrient pools of coarse woody debris

NASA Astrophysics Data System (ADS)

See, C. R.; Campbell, J. L.; Fraver, S.; Domke, G. M.; Harmon, M. E.; Knoepp, J. D.; Woodall, C. W.

2016-12-01

Woody detritus constitutes a major pool of both carbon and nutrients in forested ecosystems. Estimating coarse wood stocks relies on many assumptions, even when full surveys are conducted. Researchers rarely report error in coarse wood pool estimates, despite the importance to ecosystem budgets and modelling efforts. To date, no study has attempted a comprehensive assessment of error rates and uncertainty inherent in the estimation of this pool. Here, we use Monte Carlo analysis to propagate the error associated with the major sources of uncertainty present in the calculation of coarse wood carbon and nutrient (i.e., N, P, K, Ca, Mg, Na) pools. We also evaluate individual sources of error to identify the importance of each source of uncertainty in our estimates. We quantify sampling error by comparing the three most common field methods used to survey coarse wood (two transect methods and a whole-plot survey). We quantify the measurement error associated with length and diameter measurement, and technician error in species identification and decay class using plots surveyed by multiple technicians. We use previously published values of model error for the four most common methods of volume estimation: Smalian's, conical frustum, conic paraboloid, and average-of-ends. We also use previously published values for error in the collapse ratio (cross-sectional height/width) of decayed logs that serves as a surrogate for the volume remaining. We consider sampling error in chemical concentration and density for all decay classes, using distributions from both published and unpublished studies. Analytical uncertainty is calculated using standard reference plant material from the National Institute of Standards. Our results suggest that technician error in decay classification can have a large effect on uncertainty, since many of the error distributions included in the calculation (e.g. density, chemical concentration, volume-model selection, collapse ratio) are decay-class specific.

HPAC Info-dex 4: Locating recently published HPAC articles

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-06-01

This is an alphabetical index of articles recently published in the Heating, Piping and Air Conditioning magazine. The lists include feature editorial material and articles from HPAC`s You`ll Want To Know Department. For each entry the month and year of publication are given, followed by the page number. Material is indexed by type of system, construction, or function. All regular columns are included.

Is email a reliable means of contacting authors of previously published papers? A study of the Emergency Medicine Journal for 2001.

PubMed

O'Leary, F

2003-07-01

To determine whether it is possible to contact authors of previously published papers via email. A cross sectional study of the Emergency Medicine Journal for 2001. 118 articles were included in the study. The response rate from those with valid email addresses was 73%. There was no statistical difference between the type of email address used and the address being invalid (p=0.392) or between the type of article and the likelihood of a reply (p=0.197). More responses were obtained from work addresses when compared with Hotmail addresses (86% v 57%, p=0.02). Email is a valid means of contacting authors of previously published articles, particularly within the emergency medicine specialty. A work based email address may be a more valid means of contact than a Hotmail address.

Project FIRE Flight Investigation Reentry Environment- Winds of Change

NASA Image and Video Library

1962-11-21

As part of the project FIRE study, technicians ready materials to be subjected to high temperatures that will simulate the effects of re-entry heating. Tests of various space capsule materials for Project FIRE were conducted. Photographed in the 9 X 6 Foot Thermal Structures Tunnel. Photograph published in Winds of Change, 75th Anniversary NASA publication, by James Schultz (page 78). Photograph also published in Engineer in Charge: A History of the Langley Aeronautical Laboratory, 1917-1958 by James R. Hansen (page 476). Also Published in the book " A Century at Langley" by Joseph Chambers. Pg. 92

The General Impact of the Dwyer Materials on the Acquisition and Retention of Information about the Heart.

ERIC Educational Resources Information Center

Roberts, Dennis M.

The effectiveness of the Dwyer heart materials in facilitating learning and retention of information related to the heart under normal research conditions was investigated. Previous studies have focused on the manipulation of stimulus dimensions and not the effectiveness of the materials themselves. Data from three previous studies were compared…

Economic botany collections: A source of material evidence for exploring historical changes in Chinese medicinal materials.

PubMed

Brand, Eric; Leon, Christine; Nesbitt, Mark; Guo, Ping; Huang, Ran; Chen, Hubiao; Liang, Li; Zhao, Zhongzhen

2017-03-22

Many Chinese medicinal materials (CMMs) have changed over centuries of use, particularly in terms of their botanical identity and processing methods. In some cases, these changes have important implications for safety and efficacy in modern clinical practice. As most previous research has focused on clarifying the evolution of CMMs by analyzing traditional Chinese materia medica ("bencao") literature, assessments of historical collections are needed to validate these conclusions with material evidence. Historical collections of Chinese medicines reveal the market materials in circulation at a given moment in time, and represent an underexploited resource for analyzing the evolution of Chinese herbal medicines. This study compares specimens from a rare collection of CMMs from the 1920s with contemporary market materials; by highlighting examples of changes in botanical identity and processing that remain relevant for safe clinical practice in the modern era, this work aims to stimulate further research into previously unexplored historical collections of Chinese medicines. 620 specimens of CMMs that were collected from Chinese pharmacies in the Malay peninsula in the 1920s were examined macroscopically and compared with current pharmacopoeia specifications and authentic contemporary samples. These historical specimens, which are stored in the UK in the Economic Botany Collections (EBC) of Royal Botanic Gardens Kew, were morphologically examined, photographed, and compared to authentic CMMs stored at the Bank of China (Hong Kong) Chinese Medicines Center at Hong Kong Baptist University, as well as authentic herbarium-vouchered specimens from the Leon Collection (LC) at the Kew EBC. Case studies were selected to illustrate examples of historical changes in botanical identity, used plant parts, and processing methods. This investigation confirmed that confusion due to shared common names and regional variations in the botanical identity of certain CMMs has been a persistent issue over time. Additionally, historical changes in processing methods and the plant parts used were observed for some CMMs. In some cases, these changes have direct implications for the safe clinical practice of Chinese medicine. This preliminary assessment illustrated the significant potential of collections for clarifying historical changes in CMMs. More research is needed to investigate pre-modern collections of CMMs, including a more comprehensive assessment of the holdings in the Kew EBC and other European collections that have not yet been explored from the perspective of Chinese medicine. Copyright © 2017. Published by Elsevier B.V.

The Concise Guide to PHARMACOLOGY 2015/16: Overview.

PubMed

Alexander, Stephen Ph; Kelly, Eamonn; Marrion, Neil; Peters, John A; Benson, Helen E; Faccenda, Elena; Pawson, Adam J; Sharman, Joanna L; Southan, Christopher; Buneman, O Peter; Catterall, William A; Cidlowski, John A; Davenport, Anthony P; Fabbro, Doriano; Fan, Grace; McGrath, John C; Spedding, Michael; Davies, Jamie A

2015-12-01

The Concise Guide to PHARMACOLOGY 2015/16 provides concise overviews of the key properties of over 1750 human drug targets with their pharmacology, plus links to an open access knowledgebase of drug targets and their ligands (www.guidetopharmacology.org), which provides more detailed views of target and ligand properties. The full contents can be found at http://onlinelibrary.wiley.com/doi/10.1111/bph.13347/full. This compilation of the major pharmacological targets is divided into eight areas of focus: G protein-coupled receptors, ligand-gated ion channels, voltage-gated ion channels, other ion channels, nuclear hormone receptors, catalytic receptors, enzymes and transporters. These are presented with nomenclature guidance and summary information on the best available pharmacological tools, alongside key references and suggestions for further reading. The Concise Guide is published in landscape format in order to facilitate comparison of related targets. It is a condensed version of material contemporary to late 2015, which is presented in greater detail and constantly updated on the website www.guidetopharmacology.org, superseding data presented in the previous Guides to Receptors & Channels and the Concise Guide to PHARMACOLOGY 2013/14. It is produced in conjunction with NC-IUPHAR and provides the official IUPHAR classification and nomenclature for human drug targets, where appropriate. It consolidates information previously curated and displayed separately in IUPHAR-DB and GRAC and provides a permanent, citable, point-in-time record that will survive database updates. © 2015 The Authors. British Journal of Pharmacology published by John Wiley & Sons Ltd on behalf of The British Pharmacological Society.

Mechanical Properties and Simulated Aging of Silicone Maxillofacial Elastomers: Advancements in the Past 45 Years.

PubMed

Hatamleh, Muhanad M; Polyzois, Gregory L; Nuseir, Amjad; Hatamleh, Khaldoun; Alnazzawi, Ahmad

2016-07-01

To identify and discuss the findings of publications on mechanical behavior of maxillofacial prosthetic materials published since 1969. Original experimental articles reporting on mechanical properties of maxillofacial prosthetic materials were included. A two-stage search of the literature, electronic and hand search, identified relevant published studies up to May 2015. An extensive electronic search was conducted of databases including PubMed, Embase, Scopus, and Google Scholar. Included primary studies (n = 63) reported on tensile strength, tear strength, and hardness of maxillofacial prosthetic materials at baseline and after aging. The search revealed 63 papers, with more than 28 papers being published in the past 10 years, which shows an increased number of publications when compared to only 6 papers published in the 1970s. The increase is linear with significant correlation (r = 0.85). Such an increase reflects great awareness and continued developments and warrants more research in the field of maxillofacial prosthetic materials properties; however, it is difficult to directly compare results, as studies varied in maxillofacial prosthetic materials tested with various silicone elastomers being heavily investigated, standards followed in preparing test specimens, experimental testing protocols, and parameters used in setting simulated aging conditionings. It is imperative to overcome the existing variability by establishing unified national or international standards/specifications for maxillofacial prosthetic materials. Standardization organizations or bodies, the scientific community, and academia need to be coordinated to achieve this goal. In the meantime and despite all of these theoretically significant alternatives, clinical practice still faces problems with serviceability of maxillofacial prostheses. © 2016 by the American College of Prosthodontists.

Improved accuracy and precision in δ15 NAIR measurements of explosives, urea, and inorganic nitrates by elemental analyzer/isotope ratio mass spectrometry using thermal decomposition.

PubMed

Lott, Michael J; Howa, John D; Chesson, Lesley A; Ehleringer, James R

2015-08-15

Elemental analyzer systems generate N(2) and CO(2) for elemental composition and isotope ratio measurements. As quantitative conversion of nitrogen in some materials (i.e., nitrate salts and nitro-organic compounds) is difficult, this study tests a recently published method - thermal decomposition without the addition of O(2) - for the analysis of these materials. Elemental analyzer/isotope ratio mass spectrometry (EA/IRMS) was used to compare the traditional combustion method (CM) and the thermal decomposition method (TDM), where additional O(2) is eliminated from the reaction. The comparisons used organic and inorganic materials with oxidized and/or reduced nitrogen and included ureas, nitrate salts, ammonium sulfate, nitro esters, and nitramines. Previous TDM applications were limited to nitrate salts and ammonium sulfate. The measurement precision and accuracy were compared to determine the effectiveness of converting materials containing different fractions of oxidized nitrogen into N(2). The δ(13) C(VPDB) values were not meaningfully different when measured via CM or TDM, allowing for the analysis of multiple elements in one sample. For materials containing oxidized nitrogen, (15) N measurements made using thermal decomposition were more precise than those made using combustion. The precision was similar between the methods for materials containing reduced nitrogen. The %N values were closer to theoretical when measured by TDM than by CM. The δ(15) N(AIR) values of purchased nitrate salts and ureas were nearer to the known values when analyzed using thermal decomposition than using combustion. The thermal decomposition method addresses insufficient recovery of nitrogen during elemental analysis in a variety of organic and inorganic materials. Its implementation requires relatively few changes to the elemental analyzer. Using TDM, it is possible to directly calibrate certain organic materials to international nitrate isotope reference materials without off-line preparation. Copyright © 2015 John Wiley & Sons, Ltd.

Optimization of a novel large field of view distortion phantom for MR-only treatment planning.

PubMed

Price, Ryan G; Knight, Robert A; Hwang, Ken-Pin; Bayram, Ersin; Nejad-Davarani, Siamak P; Glide-Hurst, Carri K

2017-07-01

MR-only treatment planning requires images of high geometric fidelity, particularly for large fields of view (FOV). However, the availability of large FOV distortion phantoms with analysis software is currently limited. This work sought to optimize a modular distortion phantom to accommodate multiple bore configurations and implement distortion characterization in a widely implementable solution. To determine candidate materials, 1.0 T MR and CT images were acquired of twelve urethane foam samples of various densities and strengths. Samples were precision-machined to accommodate 6 mm diameter paintballs used as landmarks. Final material candidates were selected by balancing strength, machinability, weight, and cost. Bore sizes and minimum aperture width resulting from couch position were tabulated from the literature (14 systems, 5 vendors). Bore geometry and couch position were simulated using MATLAB to generate machine-specific models to optimize the phantom build. Previously developed software for distortion characterization was modified for several magnet geometries (1.0 T, 1.5 T, 3.0 T), compared against previously published 1.0 T results, and integrated into the 3D Slicer application platform. All foam samples provided sufficient MR image contrast with paintball landmarks. Urethane foam (compressive strength ∼1000 psi, density ~20 lb/ft 3 ) was selected for its accurate machinability and weight characteristics. For smaller bores, a phantom version with the following parameters was used: 15 foam plates, 55 × 55 × 37.5 cm 3 (L×W×H), 5,082 landmarks, and weight ~30 kg. To accommodate > 70 cm wide bores, an extended build used 20 plates spanning 55 × 55 × 50 cm 3 with 7,497 landmarks and weight ~44 kg. Distortion characterization software was implemented as an external module into 3D Slicer's plugin framework and results agreed with the literature. The design and implementation of a modular, extendable distortion phantom was optimized for several bore configurations. The phantom and analysis software will be available for multi-institutional collaborations and cross-validation trials to support MR-only planning. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Ethical Issues and Questions about Testing for Test Publishers.

ERIC Educational Resources Information Center

Fitzgibbon, Thomas J.

The test publisher's responsibility is discussed. "Right and good conduct" of the publisher in relation to the desires of the test user is related to the actual age of the test--old versus new materials. Other issues confronting the test publisher are the conflict between the needs for personal privacy and the claims of the community in relation…

Readability of Patient Education Materials in Hand Surgery and Health Literacy Best Practices for Improvement.

PubMed

Hadden, Kristie; Prince, Latrina Y; Schnaekel, Asa; Couch, Cory G; Stephenson, John M; Wyrick, Theresa O

2016-08-01

This study aimed to update a portion of a 2008 study of patient education materials from the American Society for Surgery of the Hand Web site with new readability results, to compare the results to health literacy best practices, and to make recommendations to the field for improvement. A sample of 77 patient education documents were downloaded from the American Society for Surgery of the Hand Web site, handcare.org, and assessed for readability using 4 readability tools. Mean readability grade-level scores were derived. Best practices for plain language for written health materials were compiled from 3 government agency sources. The mean readability of the 77 patient education documents in the study was 9.3 grade level. This reading level is reduced from the previous study in 2008 in which the overall mean was 10.6; however, the current sample grade level still exceeds recommended readability according to best practices. Despite a small body of literature on the readability of patient education materials related to hand surgery and other orthopedic issues over the last 7 years, readability was not dramatically improved in our current sample. Using health literacy as a framework, improvements in hand surgery patient education may result in better understanding and better outcomes for patients seeing hand surgeons. Improved understanding of patient education materials related to hand surgery may improve preventable negative outcomes that are clinically significant as well as contribute to improved quality of life for patients. Copyright © 2016 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Dynamics of house dust mite transfer in modern clothing fabrics.

PubMed

Clarke, David; Burke, Daniel; Gormally, Michael; Byrne, Miriam

2015-04-01

Clothing is largely presumed as being the mechanism by which house dust mites are distributed among locations in homes, yet little research to date has investigated the capacity with which various clothing fabric types serve as vectors for their accumulation and dispersal. Although previous research has indicated that car seats provide a habitat for mite populations, dynamics involved in the transfer of mites to clothing via car seat material is still unknown. To investigate the dynamics involved in the transfer of house dust mites from car seat material to modern clothing fabrics. A total of 480 samples of car seat material were seeded with mites and subjected to contact with plain woven cotton, denim, and fleece. Contact forces equivalent to the mass of a typical adult and child were administered for different durations of contact. Mean transfer efficiencies of mites from car seat material to receiving clothing fabrics ranged from 7.2% to 19.1%. Fabric type, mite condition (live or dead), and the force applied all revealed a significant effect (P < .001 for each variable) on the transfer efficiency of house dust mites from seeded material to receiving fabrics, whereas duration of contact revealed no effect (P = .20). In particular, mean numbers of mites transferred to fleece (compared with denim and plain woven cotton) were greater for each treatment. These findings indicate that clothing type can have important implications for the colonization of other biotopes by house dust mites, with potential for affecting an individuals' personal exposure to dust mite allergens. Copyright © 2015 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Evidence for a Role for Nanoporosity and Pyridinoline Content in Human Mild Osteogenesis Imperfecta.

PubMed

Paschalis, Eleftherios P; Gamsjaeger, Sonja; Fratzl-Zelman, Nadja; Roschger, Paul; Masic, Admir; Brozek, Wolfgang; Hassler, Norbert; Glorieux, Francis H; Rauch, Frank; Klaushofer, Klaus; Fratzl, Peter

2016-05-01

Osteogenesis imperfecta (OI) is a clinically and genetically heterogeneous connective tissue disorder characterized by bone fragility that arises from decreased bone mass and abnormalities in bone material quality. OI type I represents the milder form of the disease and according to the original Sillence classification is characterized by minimal skeletal deformities and near-normal stature. Raman microspectroscopy is a vibrational spectroscopic technique that allows the determination of bone material properties in bone biopsy blocks with a spatial resolution of ∼1 µm, as a function of tissue age. In the present study, we used Raman microspectroscopy to evaluate bone material quality in transiliac bone biopsies from children with a mild form of OI, either attributable to collagen haploinsufficiency OI type I (OI-Quant; n = 11) or aberrant collagen structure (OI-Qual; n = 5), as a function of tissue age, and compared it against the previously published values established in a cohort of biopsies from healthy children (n = 54, ages 1 to 23 years). The results indicated significant differences in bone material compositional characteristics between OI-Quant patients and healthy controls, whereas fewer were evident in the OI-Qual patients. Differences in both subgroups of OI compared with healthy children were evident for nanoporosity, mineral maturity/crystallinity as determined by maxima of the v1 PO4 Raman band, and pyridinoline (albeit in different direction) content. These alterations in bone material compositional properties most likely contribute to the bone fragility characterizing this disease. © 2016 American Society for Bone and Mineral Research. © 2016 American Society for Bone and Mineral Research.

In situ evaluation of a new silorane-based composite resin's bioadhesion properties.

PubMed

Claro-Pereira, Diogo; Sampaio-Maia, Benedita; Ferreira, Carla; Rodrigues, Andreia; Melo, Luís F; Vasconcelos, Mário R

2011-12-01

The aim of the present study was to compare, in situ, the initial dental plaque formation on a recently developed silorane-based composite resin, Filtek Silorane, and on a widely used methacrylate-based composite resin, Synergy D6, and to relate possible differences to surface free energy, hydrophobicity and type of organic matrix. Discs of Filtek Silorane and Synergy D6 were prepared and polished equally in order to attain the same surface roughness. Water, formamide and 1-bromonaphthalene contact angles were determined and the surface free energy and the hydrophobicity of the materials calculated. Two discs of each material were mounted in individual oral splints and exposed to the oral cavity of 20 participants for 4h. After this period the microbial adhesion to both materials' surface was measured by two different approaches, the DAPI staining and the plate count. Statistical analysis was performed using non-parametric tests. The surface roughness (R(a) parameter) was similar between the two materials and lower than 0.2μm. Mean water and formamide contact angles were significantly higher for Filtek Silorane, which presented significantly lower surface free energy and greater degree of hydrophobicity in comparison to Synergy D6. The bioadhesion potential evaluated by either DAPI staining or plate count did not differ between the two materials. In contrast to previous in vitro studies, the present in situ study found no statistically significant differences with respect to bacterial adhesion between Filtek Silorane and Synergy D6, despite the differences found for surface free energy and hydrophobicity. Copyright © 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Improving taxonomic accuracy for fungi in public sequence databases: applying ‘one name one species’ in well-defined genera with Trichoderma/Hypocrea as a test case

PubMed Central

Strope, Pooja K; Chaverri, Priscila; Gazis, Romina; Ciufo, Stacy; Domrachev, Michael; Schoch, Conrad L

2017-01-01

Abstract The ITS (nuclear ribosomal internal transcribed spacer) RefSeq database at the National Center for Biotechnology Information (NCBI) is dedicated to the clear association between name, specimen and sequence data. This database is focused on sequences obtained from type material stored in public collections. While the initial ITS sequence curation effort together with numerous fungal taxonomy experts attempted to cover as many orders as possible, we extended our latest focus to the family and genus ranks. We focused on Trichoderma for several reasons, mainly because the asexual and sexual synonyms were well documented, and a list of proposed names and type material were recently proposed and published. In this case study the recent taxonomic information was applied to do a complete taxonomic audit for the genus Trichoderma in the NCBI Taxonomy database. A name status report is available here: https://www.ncbi.nlm.nih.gov/Taxonomy/TaxIdentifier/tax_identifier.cgi. As a result, the ITS RefSeq Targeted Loci database at NCBI has been augmented with more sequences from type and verified material from Trichoderma species. Additionally, to aid in the cross referencing of data from single loci and genomes we have collected a list of quality records of the RPB2 gene obtained from type material in GenBank that could help validate future submissions. During the process of curation misidentified genomes were discovered, and sequence records from type material were found hidden under previous classifications. Source metadata curation, although more cumbersome, proved to be useful as confirmation of the type material designation. Database URL: http://www.ncbi.nlm.nih.gov/bioproject/PRJNA177353 PMID:29220466

Full-scale aircraft cabin flammability tests of improved fire-resistant materials, test series 2

NASA Technical Reports Server (NTRS)

Stuckey, R. N.; Bricker, R. W.; Kuminecz, J. F.; Supkis, D. E.

1976-01-01

Full-scale aircraft flammability tests in which the effectiveness of new fire-resistant materials was evaluated by comparing their burning characteristics with those of other fire-resistant aircraft materials were described. New-fire-resistant materials that are more economical and better suited for aircraft use than the previously tested fire-resistant materials were tested. The fuel ignition source for one test was JP-4; a smokeless fuel was used for the other test. Test objectives, methods, materials, and results are presented and discussed. The results indicate that, similar to the fire-resistant materials tested previously, the new materials decompose rather than ignite and do not support fire propagation. Furthermore, the new materials did not produce a flash fire.

Online Sources for Competitor Information.

ERIC Educational Resources Information Center

Weiss, Arthur

Competitor information gathering is a key aspect of business planning. Information can be collected from either published or unpublished sources. Unpublished information will often be verified based on material from published sources. Published information is more likely to be factual and includes financial, stockmarket, press, market and…

76 FR 396 - Product Change-Priority Mail-Non-Published Rates

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-04

... POSTAL SERVICE Product Change--Priority Mail--Non-Published Rates AGENCY: Postal Service TM . ACTION: Notice. SUMMARY: Postal Service notice of filing of a request with the Postal Regulatory... States Postal Service Concerning Priority Mail--Non-Published Rates and Notice of Filing Materials Under...

2 CFR 215.36 - Intangible property.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... This “recorded” material excludes physical objects (e.g., laboratory samples). Research data also do... person in a research study. (ii) Published is defined as either when: (A) Research findings are published... Information Act (FOIA) request for research data relating to published research findings produced under an...

2 CFR 215.36 - Intangible property.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... This “recorded” material excludes physical objects (e.g., laboratory samples). Research data also do... person in a research study. (ii) Published is defined as either when: (A) Research findings are published... Information Act (FOIA) request for research data relating to published research findings produced under an...

2 CFR 215.36 - Intangible property.

Code of Federal Regulations, 2011 CFR

2011-01-01

.... This “recorded” material excludes physical objects (e.g., laboratory samples). Research data also do... person in a research study. (ii) Published is defined as either when: (A) Research findings are published... Information Act (FOIA) request for research data relating to published research findings produced under an...

Investigation of preparation techniques for δ2H analysis of keratin materials and a proposed analytical protocol

USGS Publications Warehouse

Qi, H.; Coplen, T.B.

2011-01-01

Accurate hydrogen isotopic measurements of keratin materials have been a challenge due to exchangeable hydrogen in the sample matrix and the paucity of appropriate isotopic reference materials for calibration. We found that the most reproducible δ2HVSMOW-SLAP and mole fraction of exchangeable hydrogen, x(H)ex, of keratin materials were measured with equilibration at ambient temperature using two desiccators and two different equilibration waters with two sets of the keratin materials for 6 days. Following equilibration, drying the keratin materials in a vacuum oven for 4 days at 60 °C was most critical. The δ2H analysis protocol also includes interspersing isotopic reference waters in silver tubes among samples in the carousel of a thermal conversion elemental analyzer (TC/EA) reduction unit. Using this analytical protocol, δ2HVSMOW-SLAP values of the non-exchangeable fractions of USGS42 and USGS43 human-hair isotopic reference materials were determined to be –78.5 ± 2.3 ‰ and –50.3 ± 2.8 ‰, respectively. The measured x(H)ex values of keratin materials analyzed with steam equilibration and N2 drying were substantially higher than those previously published, and dry N2 purging was unable to remove absorbed moisture completely, even with overnight purging. The δ2H values of keratin materials measured with steam equilibration were about 10 ‰ lower than values determined with equilibration in desiccators at ambient temperatures when on-line evacuation was used to dry samples. With steam equilibrations the x(H)ex of commercial keratin powder was as high as 28 %. Using human-hair isotopic reference materials to calibrate other keratin materials, such as hoof or horn, can introduce bias in δ2H measurements because the amount of absorbed water and the x(H)ex values may differ from those of unknown samples. Correct δ2HVSMOW-SLAP values of the non-exchangeable fractions of unknown human-hair samples can be determined with atmospheric moisture equilibration by normalizing with USGS42 and USGS43 human-hair reference materials when all materials have the same powder size.

76 FR 70217 - Pipeline Safety: Information Collection Activities

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-10

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Administration [Docket No. PHMSA... OMB approval of new Information Collection. AGENCY: Pipeline and Hazardous Materials Safety... Pipeline and Hazardous Materials Safety Administration (PHMSA) published a notice in the Federal Register...

Chronology of KSC and KSC Related Events for 2012

NASA Technical Reports Server (NTRS)

Liston, Elaine E.

2013-01-01

This 2012 Chronology is published to describe and document KSC's role in NASA's progress. Materials for this Chronology were selected from a number of published sources. The document records KSC events of interest to historians and other researchers. Arrangement is by date of occurrence, though the source cited may be dated one or more days after the event. Materials were researched and compiled for publication by Archivist Elaine Liston.

High-order shock-fitted detonation propagation in high explosives

NASA Astrophysics Data System (ADS)

Romick, Christopher M.; Aslam, Tariq D.

2017-03-01

A highly accurate numerical shock and material interface fitting scheme composed of fifth-order spatial and third- or fifth-order temporal discretizations is applied to the two-dimensional reactive Euler equations in both slab and axisymmetric geometries. High rates of convergence are not typically possible with shock-capturing methods as the Taylor series analysis breaks down in the vicinity of discontinuities. Furthermore, for typical high explosive (HE) simulations, the effects of material interfaces at the charge boundary can also cause significant computational errors. Fitting a computational boundary to both the shock front and material interface (i.e. streamline) alleviates the computational errors associated with captured shocks and thus opens up the possibility of high rates of convergence for multi-dimensional shock and detonation flows. Several verification tests, including a Sedov blast wave, a Zel'dovich-von Neumann-Döring (ZND) detonation wave, and Taylor-Maccoll supersonic flow over a cone, are utilized to demonstrate high rates of convergence to nontrivial shock and reaction flows. Comparisons to previously published shock-capturing multi-dimensional detonations in a polytropic fluid with a constant adiabatic exponent (PF-CAE) are made, demonstrating significantly lower computational error for the present shock and material interface fitting method. For an error on the order of 10 m /s, which is similar to that observed in experiments, shock-fitting offers a computational savings on the order of 1000. In addition, the behavior of the detonation phase speed is examined for several slab widths to evaluate the detonation performance of PBX 9501 while utilizing the Wescott-Stewart-Davis (WSD) model, which is commonly used in HE modeling. It is found that the thickness effect curve resulting from this equation of state and reaction model using published values is dramatically more steep than observed in recent experiments. Utilizing the present fitting strategy, in conjunction with a nonlinear optimizer, a new set of reaction rate parameters improves the correlation of the model to experimental results. Finally, this new model is tested against two dimensional slabs as a validation test.

Water-insoluble material from apple pomace makes changes in intracellular NAD⁺/NADH ratio and pyrophosphate content and stimulates fermentative production of hydrogen.

PubMed

Sato, Osamu; Suzuki, Yuma; Sato, Yuki; Sasaki, Shinsuke; Sonoki, Tomonori

2015-05-01

Apple pomace is one of the major agricultural residues in Aomori prefecture, Japan, and it would be useful to develop effective applications for it. As apple pomace contains easily fermentable sugars such as glucose, fructose and sucrose, it can be used as a feedstock for the fermentation of fuels and chemicals. We previously isolated a new hydrogen-producing bacterium, Clostridium beijerinckii HU-1, which could produce H2 at a production rate of 14.5 mmol of H2/L/h in a fed-batch culture at 37 °C, pH 6.0. In this work we found that the HU-1 strain produces H2 at an approximately 20% greater rate when the fermentation medium contains the water-insoluble material from apple pomace. The water-insoluble material from apple pomace caused a metabolic shift that stimulated H2 production. HU-1 showed a decrease of lactate production, which consumes NADH, accompanied by an increase of the intracellular pyrophosphate content, which is an inhibitor of lactate dehydrogenase. The intracellular NAD(+)/NADH ratios of HU-1 during H2 fermentation were maintained in a more reductive state than those observed without the addition of the water insoluble material. To correct the abnormal intracellular redox balance, caused by the repression of lactate production, H2 production with NADH oxidation must be stimulated. Copyright © 2014 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Analysis of the Impedance Resonance of Piezoelectric Multi-Fiber Composite Stacks

NASA Technical Reports Server (NTRS)

Sherrit, S.; Djrbashian, A.; Bradford, S C

2013-01-01

Multi-Fiber CompositesTM (MFC's) produced by Smart Materials Corp behave essentially like thin planar stacks where each piezoelectric layer is composed of a multitude of fibers. We investigate the suitability of using previously published inversion techniques for the impedance resonances of monolithic co-fired piezoelectric stacks to the MFCTM to determine the complex material constants from the impedance data. The impedance equations examined in this paper are those based on the derivation. The utility of resonance techniques to invert the impedance data to determine the small signal complex material constants are presented for a series of MFC's. The technique was applied to actuators with different geometries and the real coefficients were determined to be similar within changes of the boundary conditions due to change of geometry. The scatter in the imaginary coefficient was found to be larger. The technique was also applied to the same actuator type but manufactured in different batches with some design changes in the non active portion of the actuator and differences in the dielectric and the electromechanical coupling between the two batches were easily measureable. It is interesting to note that strain predicted by small signal impedance analysis is much lower than high field stains. Since the model is based on material properties rather than circuit constants, it could be used for the direct evaluation of specific aging or degradation mechanisms in the actuator as well as batch sorting and adjustment of manufacturing processes.

'Bolam' to 'Montgomery' is result of evolutionary change of medical practice towards 'patient-centred care'.

PubMed

Lee, Albert

2017-01-01

The Supreme Court judgement in 'Montgomery v Lanarkshire Health Board' has caused a change in the law concerning the duty of doctors on disclosure of information to patients regarding risks. The law now requires a doctor to take reasonable care to ensure that the patient is aware of any material risks involved in any recommended treatment, and of any reasonable alternative or variant treatments. Are doctors totally removed from the protective shield even if the practice is accepted by a reasonable body of medical opinion previously laid down by 'Bolam' with the recent Supreme Court decision in the 'Montgomery' case? This paper questions whether the 'Bolam' principle needs to be discarded or re-interpreted in the modern context of health care. Adopting 'patient-centred' care to unfold the 'significant risks' attached to patients would align with the evolving changes in medical law. It should be the changing context of health care driving the evolving change of law. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Medical ultrasound: imaging of soft tissue strain and elasticity

PubMed Central

Wells, Peter N. T.; Liang, Hai-Dong

2011-01-01

After X-radiography, ultrasound is now the most common of all the medical imaging technologies. For millennia, manual palpation has been used to assist in diagnosis, but it is subjective and restricted to larger and more superficial structures. Following an introduction to the subject of elasticity, the elasticity of biological soft tissues is discussed and published data are presented. The basic physical principles of pulse-echo and Doppler ultrasonic techniques are explained. The history of ultrasonic imaging of soft tissue strain and elasticity is summarized, together with a brief critique of previously published reviews. The relevant techniques—low-frequency vibration, step, freehand and physiological displacement, and radiation force (displacement, impulse, shear wave and acoustic emission)—are described. Tissue-mimicking materials are indispensible for the assessment of these techniques and their characteristics are reported. Emerging clinical applications in breast disease, cardiology, dermatology, gastroenterology, gynaecology, minimally invasive surgery, musculoskeletal studies, radiotherapy, tissue engineering, urology and vascular disease are critically discussed. It is concluded that ultrasonic imaging of soft tissue strain and elasticity is now sufficiently well developed to have clinical utility. The potential for further research is examined and it is anticipated that the technology will become a powerful mainstream investigative tool. PMID:21680780

Boric acid ingestion clinically mimicking toxic epidermal necrolysis.

PubMed

Webb, David V; Stowman, Anne M; Patterson, James W

2013-11-01

The ingestion of large amounts of boric acid, a component of household insecticides, is a rare occurrence, characterized by a diffuse desquamative skin eruption, neutropenia, thrombocytopenia, delirium, acute renal failure and prolonged ileus. A 56-year-old male with a history of multiple previous suicide attempts was witnessed ingesting household roach killer and 4 days later presented to the hospital with lethargy, stiffness and a diffuse erythematous and desquamative eruption with bullous formation. He subsequently developed erythema of both palms as well as alopecia totalis. Histopathology from a right arm shave biopsy revealed a mostly intact epidermis with subtle vacuolar alteration of the basal layer, scattered intraepidermal apoptotic keratinocytes, parakeratosis with alternating layers of orthokeratosis and considerable superficial exfoliation; accompanying dermal changes included vasodilatation and mild perivascular inflammation. This report describes the cutaneous and systemic complications in a rare case of boric acid ingestion. There is little published material on the symptoms and histopathology following boric acid ingestion, but knowledge of this entity is important, both to differentiate it from other causes of desquamative skin rashes and to allow the initiation of appropriate clinical care. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Title list of documents made publicly available, October 1-31, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-12-01

This monthly publication describes the information received and published by the U.S. Nuclear Regulatory Commission (NRC). It includes: (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and (2) non-docketed material received and published. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number index. Seven docketed items are included which pertain to licensing, radioactive waste, nuclear power plant design. The 26 non-docketed items include committee reports; NRC correspondence, issuances, and reports; inspections and deficiency findings; and waste management documents.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morris, E.B.

The Title List of Documents Made Publicly Available is a monthly publication. It describes the information received and published by the U.S. Nuclear Regulatory Commission (NRC). This information includes (1) docketed, material associated with civilian nuclear power plants and other uses of radioactive materials and (2) non-docketed material received and published by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index and amore » Report Number Index.« less

Title list of documents made publicly available: April 1--30, 1996. Volume 18, Number 4

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-06-01

This publication describes the information received and published by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) non-docketed material received and published by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index.

Retracted articles in surgery journals. What are surgeons doing wrong?

PubMed

Cassão, Bruna Dell'Acqua; Herbella, Fernando A M; Schlottmann, Francisco; Patti, Marco G

2018-06-01

Retraction of previously published scientific articles is an important mechanism to preserve the integrity of scientific work. This study analyzed retractions of previously published articles from surgery journals. We searched for retracted articles in the 100 surgery journals with the highest SJR2 indicator grades. We found 130 retracted articles in 49 journals (49%). Five or more retracted articles were published in 8 journals (8%). The mean time between publication and retraction was 26 months (range 1 to 158 months). The United States, China, Germany, Japan, and the United Kingdom accounted for more than 3 out of 4 of the retracted articles. The greatest number of retractions came from manuscripts about orthopedics and traumatology, general surgery, anesthesiology, cardiothoracic surgery, and plastic surgery. Nonsurgeons were responsible for 16% of retractions in these surgery journals. The main reasons for retraction were duplicate publication (42%), plagiarism (16%), absence of proven integrity of the study (14%), incorrect data (13%), data published without authorization (12%), violation of research ethics (11%), documented fraud (11%), request of an author(s) (5%), and unknown (3%). In 25% of the retracted articles, other publications by the same authors also had been retracted. Retraction of published articles does not occur frequently in surgery journals. Some form of scientific misconduct was present in the majority of retractions, especially duplication of publication and plagiarism. Retractions of previously published articles were most frequent from countries with the greatest number of publications; some authors showed recidivism. Copyright © 2018 Elsevier Inc. All rights reserved.

37 CFR 381.10 - Cost of living adjustment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... determined by the Consumer Price Index (all consumers, all items) during the period from the most recent Index published prior to December 1, 2006, to the most recent Index published prior to December 1, 2007... the cost of living during the period from the most recent index published prior to the previous notice...

37 CFR 253.10 - Cost of living adjustment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... determined by the Consumer Price Index (all consumers, all items) during the period from the most recent Index published prior to December 1, 2002, to the most recent Index published prior to December 1, 2003... cost of living during the period from the most recent index published prior to the previous notice, to...

37 CFR 381.10 - Cost of living adjustment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... determined by the Consumer Price Index (all consumers, all items) during the period from the most recent Index published prior to December 1, 2012, to the most recent Index published prior to December 1, 2013... change in the cost of living during the period from the most recent index published prior to the previous...

37 CFR 381.10 - Cost of living adjustment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... determined by the Consumer Price Index (all consumers, all items) during the period from the most recent Index published prior to December 1, 2006, to the most recent Index published prior to December 1, 2007... the cost of living during the period from the most recent index published prior to the previous notice...

37 CFR 381.10 - Cost of living adjustment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... determined by the Consumer Price Index (all consumers, all items) during the period from the most recent Index published prior to December 1, 2012, to the most recent Index published prior to December 1, 2013... change in the cost of living during the period from the most recent index published prior to the previous...

37 CFR 253.10 - Cost of living adjustment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... determined by the Consumer Price Index (all consumers, all items) during the period from the most recent Index published prior to December 1, 2002, to the most recent Index published prior to December 1, 2003... cost of living during the period from the most recent index published prior to the previous notice, to...

37 CFR 253.10 - Cost of living adjustment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... determined by the Consumer Price Index (all consumers, all items) during the period from the most recent Index published prior to December 1, 2002, to the most recent Index published prior to December 1, 2003... cost of living during the period from the most recent index published prior to the previous notice, to...

37 CFR 253.10 - Cost of living adjustment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... determined by the Consumer Price Index (all consumers, all items) during the period from the most recent Index published prior to December 1, 2002, to the most recent Index published prior to December 1, 2003... cost of living during the period from the most recent index published prior to the previous notice, to...

37 CFR 381.10 - Cost of living adjustment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... determined by the Consumer Price Index (all consumers, all items) during the period from the most recent Index published prior to December 1, 2006, to the most recent Index published prior to December 1, 2007... the cost of living during the period from the most recent index published prior to the previous notice...

Using Publishers' Web Sites for Reference Collection Development.

ERIC Educational Resources Information Center

Holmberg, Melissa

2000-01-01

Analyzes the ways publishers' Web sites can be used by librarians to locate additional science and technology reference materials which fall within budget constraints while meeting the needs of the patrons. Reviews specific publishers' Web sites to compare features and show how they differ. (Author/LRW)

45 CFR 74.36 - Intangible property.

Code of Federal Regulations, 2014 CFR

2014-10-01

...” material excludes physical objects (e.g., laboratory samples). Research data also do not include: (A) Trade... study. (ii) Published is defined as either when: (A) Research findings are published in a peer-reviewed... Information Act (FOIA) request for research data relating to published research findings produced under an...

45 CFR 2543.36 - Intangible property.

Code of Federal Regulations, 2013 CFR

2013-10-01

...” material excludes physical objects (e.g., laboratory samples). Research data also do not include: (A) Trade... study. (ii) Published is defined as either when: (A) Research findings are published in a peer-reviewed... Information Act (FOIA) request for research data relating to published research findings produced under an...

45 CFR 2543.36 - Intangible property.

Code of Federal Regulations, 2014 CFR

2014-10-01

...” material excludes physical objects (e.g., laboratory samples). Research data also do not include: (A) Trade... study. (ii) Published is defined as either when: (A) Research findings are published in a peer-reviewed... Information Act (FOIA) request for research data relating to published research findings produced under an...

45 CFR 2543.36 - Intangible property.

Code of Federal Regulations, 2010 CFR

2010-10-01

...” material excludes physical objects (e.g., laboratory samples). Research data also do not include: (A) Trade... study. (ii) Published is defined as either when: (A) Research findings are published in a peer-reviewed... Information Act (FOIA) request for research data relating to published research findings produced under an...

45 CFR 74.36 - Intangible property.

Code of Federal Regulations, 2011 CFR

2011-10-01

...” material excludes physical objects (e.g., laboratory samples). Research data also do not include: (A) Trade... study. (ii) Published is defined as either when: (A) Research findings are published in a peer-reviewed... Information Act (FOIA) request for research data relating to published research findings produced under an...

45 CFR 74.36 - Intangible property.

Code of Federal Regulations, 2010 CFR

2010-10-01

...” material excludes physical objects (e.g., laboratory samples). Research data also do not include: (A) Trade... study. (ii) Published is defined as either when: (A) Research findings are published in a peer-reviewed... Information Act (FOIA) request for research data relating to published research findings produced under an...

45 CFR 74.36 - Intangible property.

Code of Federal Regulations, 2012 CFR

2012-10-01

...” material excludes physical objects (e.g., laboratory samples). Research data also do not include: (A) Trade... study. (ii) Published is defined as either when: (A) Research findings are published in a peer-reviewed... Information Act (FOIA) request for research data relating to published research findings produced under an...

45 CFR 74.36 - Intangible property.

Code of Federal Regulations, 2013 CFR

2013-10-01

...” material excludes physical objects (e.g., laboratory samples). Research data also do not include: (A) Trade... study. (ii) Published is defined as either when: (A) Research findings are published in a peer-reviewed... Information Act (FOIA) request for research data relating to published research findings produced under an...

45 CFR 2543.36 - Intangible property.

Code of Federal Regulations, 2011 CFR

2011-10-01

...” material excludes physical objects (e.g., laboratory samples). Research data also do not include: (A) Trade... study. (ii) Published is defined as either when: (A) Research findings are published in a peer-reviewed... Information Act (FOIA) request for research data relating to published research findings produced under an...

45 CFR 2543.36 - Intangible property.

Code of Federal Regulations, 2012 CFR

2012-10-01

...” material excludes physical objects (e.g., laboratory samples). Research data also do not include: (A) Trade... study. (ii) Published is defined as either when: (A) Research findings are published in a peer-reviewed... Information Act (FOIA) request for research data relating to published research findings produced under an...

48 CFR 1552.208-70 - Printing.

Code of Federal Regulations, 2010 CFR

2010-10-01

...” (or “camera-ready copy”) is a final document suitable for printing/duplication. “Desktop Publishing... from desktop publishing is being sent to a typesetting device (i.e., Linotronic) with camera copy being... preparing related illustrative material to a final document (camera-ready copy) using desktop publishing. (2...

Organisational characteristics associated with shift work practices and potential opportunities for intervention: findings from a Canadian study.

PubMed

Hall, Amy L; Smit, Andrea N; Mistlberger, Ralph E; Landry, Glenn J; Koehoorn, Mieke

2017-01-01

Shift work is a common working arrangement with wide-ranging implications for worker health. Organisational determinants of shift work practices are not well characterised; such information could be used to guide evidence-based research and best practices to mitigate shift work's negative effects. This exploratory study aimed to describe and assess organisational-level determinants of shift work practices thought to affect health, across a range of industry sectors. Data on organisational characteristics, shift work scheduling, provision of shift work education materials/training to employees and night-time lighting policies in the workplace were collected during phone interviews with organisations across the Canadian province of British Columbia. Relationships between organisational characteristics and shift work practices were assessed using multivariable logistic regression models. The study sample included 88 participating organisations, representing 30 700 shift workers. Long-duration shifts, provision of shift work education materials/training to employees and night-time lighting policies were reported by approximately one-third of participating organisations. Odds of long-duration shifts increased in larger workplaces and by industry. Odds of providing shift work education materials/training increased in larger workplaces, in organisations reporting concern for shift worker health and in organisations without seasonal changes in shift work. Odds of night-time lighting policies in the workplace increased in organisations reporting previous workplace accidents or incidents that occurred during non-daytime hours, site maintenance needs and client service or care needs. This study points to organisational determinants of shift work practices that could be useful for targeting research and workplace interventions. Results should be interpreted as preliminary in an emerging body of literature on shift work and health. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

76 FR 65779 - Office of Hazardous Materials Safety; Notice of Applications for Modification of Special Permit

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-24

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of... processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR... special permit is published in accordance with Part 107 of the Federal hazardous materials transportation...

10 CFR 431.15 - Materials incorporated by reference.

Code of Federal Regulations, 2014 CFR

2014-01-01

... approval, and a notice of any change in the material will be published in the Federal Register. All... 10 Energy 3 2014-01-01 2014-01-01 false Materials incorporated by reference. 431.15 Section 431.15... INDUSTRIAL EQUIPMENT Electric Motors Test Procedures, Materials Incorporated and Methods of Determining...

Developing a Principled Framework for Materials Evaluation: Some Considerations

ERIC Educational Resources Information Center

Alkhaldi, Ali Ata

2010-01-01

Published language materials are widely used around the world, but many Foreign Language (FL) and/or Second Language (SL) learners still fail to develop their communicative competence satisfactorily and they are still not happy with their language materials. Materials design has recently been characterized by two important developments: first,…

Television for Effective Parenthood; Literature Search and Existing Materials Assessment.

ERIC Educational Resources Information Center

Appalachia Educational Lab., Charleston, WV.

Materials concerning parenthood education were assessed and classified as published research, audiovisual materials, and pamphlets and booklets. Eighty-nine items of related research were reviewed and listed in a bibliography. Content and technical quality of audiovisual materials from a national search were reviewed and evaluated based on…

49 CFR 572.40 - Incorporated materials.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Register has approved the materials incorporated by reference. For materials subject to change, only the... incorporated. A notice of any change will be published in the Federal Register. As a convenience to the reader... volume of the Code of Federal Regulations. (b) The materials incorporated in this part by reference are...

Development of Sensors for Ceramic Components in Advanced Propulsion Systems. Phase 2; Temperature Sensor Systems Evaluation

NASA Technical Reports Server (NTRS)

Atkinson, W. H.; Cyr, M. A.; Strange, R. R.

1994-01-01

The 'development of sensors for ceramic components in advanced propulsion systems' program is divided into two phases. The objectives of Phase 1 were to analyze, evaluate and recommend sensor concepts for the measurement of surface temperature, strain and heat flux on ceramic components for advanced propulsion systems. The results of this effort were previously published in NASA CR-182111. As a result of Phase 1, three approaches were recommended for further development: pyrometry, thin-film sensors, and thermographic phosphors. The objective of Phase 2 were to fabricate and conduct laboratory demonstration tests of these systems. Six materials, mutually agreed upon by NASA and Pratt & Whitney, were investigated under this program. This report summarizes the Phase 2 effort and provides conclusions and recommendations for each of the categories evaluated.

Human niche construction in interdisciplinary focus

PubMed Central

Kendal, Jeremy; Tehrani, Jamshid J.; Odling-Smee, John

2011-01-01

Niche construction is an endogenous causal process in evolution, reciprocal to the causal process of natural selection. It works by adding ecological inheritance, comprising the inheritance of natural selection pressures previously modified by niche construction, to genetic inheritance in evolution. Human niche construction modifies selection pressures in environments in ways that affect both human evolution, and the evolution of other species. Human ecological inheritance is exceptionally potent because it includes the social transmission and inheritance of cultural knowledge, and material culture. Human genetic inheritance in combination with human cultural inheritance thus provides a basis for gene–culture coevolution, and multivariate dynamics in cultural evolution. Niche construction theory potentially integrates the biological and social aspects of the human sciences. We elaborate on these processes, and provide brief introductions to each of the papers published in this theme issue. PMID:21320894

Redescription and phylogenetic relationships of Euparyphium capitaneum Dietz, 1909, the type-species of Euparyphium Dietz, 1909 (Digenea: Echinostomatidae).

PubMed

Kudlai, Olena; Tkach, Vasyl V; Pulis, Eric E; Kostadinova, Aneta

2015-01-01

Euparyphium capitaneum Dietz, 1909, the type-species of the genus Euparyphium Dietz, 1909, is described on the basis of material collected from the type-host Anhinga anhinga (L.) from Pascagoula River, which drains into the northern coast of the Gulf of Mexico. Combination of light and scanning electron microscopy observations of freshly collected and properly fixed specimens in our study has allowed us to provide novel information on the morphology and topology of the reproductive systems and other morphological features of the species. A Bayesian inference analysis based on the newly-obtained partial sequence of the nuclear 28S rRNA gene for E. capitaneum and 24 previously published sequences from the superfamily Echinostomatoidea Looss, 1899 provided evidence supporting the distinct status of the genera Euparyphium and Isthmiophora Lühe, 1909.

The earliest seeds

USGS Publications Warehouse

Gillespie, W.H.; Rothwell, G.W.; Scheckler, S.E.

1981-01-01

Lagenostomalean-type seeds in bifurcating cupule systems have been discovered in the late Devonian Hampshire Formation of Randolph County, West Virginia, USA (Fig. 1). The associated megaflora, plants from coal balls, and vertebrate and invertebrate faunas demonstrate that the material is Famennian; the microflora indicates a more specific Fa2c age. Consequently, these seeds predate Archaeosperma arnoldii1 from the Fa2d of northeastern Pennsylvania, the oldest previously reported seed. By applying precision fracture, transfer, de??gagement, and thin-section techniques to selected cupules from the more than 100 specimens on hand, we have determined the three-dimensional morphology and histology of the seeds (Fig. 2a-h, k) and cupule systems. A comparison with known late Devonian to early Carboniferous seeds reveals that ours are more primitively organized than all except Genomosperma2,3. ?? 1981 Nature Publishing Group.

Self-reported exposure to disablism is associated with poorer self-reported health and well-being among adults with intellectual disabilities in England: a cross-sectional survey.

PubMed

Emerson, E

2010-12-01

To determine the association between exposure to disablism and the health and well-being of adults with intellectual disabilities. Cross-sectional survey. Secondary analysis of data extracted from the survey of Adults with Learning Difficulties in England 2003/4. Both self-reported exposure to bullying while at school and self-reported exposure to overt acts of disablism over the previous 12 months were associated with poorer self-reported health outcomes. In the vast majority of instances, these associations were stronger for people with lower levels of material or social resources. Exposure to overt acts of disablism may contribute to the health inequalities experienced by people with intellectual disabilities. Copyright © 2010 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Analytical Investigation of the Limits for the In-Plane Thermal Conductivity Measurement Using a Suspended Membrane Setup

NASA Astrophysics Data System (ADS)

Linseis, V.; Völklein, F.; Reith, H.; Woias, P.; Nielsch, K.

2018-06-01

An analytical study has been performed on the measurement capabilities of a 100-nm thin suspended membrane setup for the in-plane thermal conductivity measurements of thin film samples using the 3 ω measurement technique, utilizing a COSMOL Multiphysics simulation. The maximum measurement range under observance of given boundary conditions has been studied. Three different exemplary sample materials, with a thickness from the nanometer to the micrometer range and a thermal conductivity from 0.4 W/mK up to 100 W/mK have been investigated as showcase studies. The results of the simulations have been compared to a previously published evaluation model, in order to determine the deviation between both and thereby the measurement limit. As thermal transport properties are temperature dependent, all calculations refer to constant room temperature conditions.

Active and passive vibration suppression for space structures

NASA Technical Reports Server (NTRS)

Hyland, David C.

1991-01-01

The relative benefits of passive and active vibration suppression for large space structures (LSS) are discussed. The intent is to sketch the true ranges of applicability of these approaches using previously published technical results. It was found that the distinction between active and passive vibration suppression approaches is not as sharp as might be thought at first. The relative simplicity, reliability, and cost effectiveness touted for passive measures are vitiated by 'hidden costs' bound up with detailed engineering implementation issues and inherent performance limitations. At the same time, reliability and robustness issues are often cited against active control. It is argued that a continuum of vibration suppression measures offering mutually supporting capabilities is needed. The challenge is to properly orchestrate a spectrum of methods to reap the synergistic benefits of combined advanced materials, passive damping, and active control.

Successful use of digoxin-specific immune Fab in the treatment of severe Nerium oleander toxicosis in a dog.

PubMed

Pao-Franco, Amaris; Hammond, Tara N; Weatherton, Linda K; DeClementi, Camille; Forney, Scott D

2017-09-01

To describe a case in which digoxin-specific immune Fab was used successfully in a dog with severe oleander toxicosis secondary to ingesting plant material. A 6-year-old intact female Rhodesian Ridgeback mixed breed dog was presented for severe oleander toxicosis and was refractory to all antiarrhythmic therapies and supportive care. Digoxin-specific immune Fab was successful in treating this dog. The dog recovered but suffered ischemic injuries, the long-term effects of which are unknown. This report describes the successful use of digoxin-specific immune Fab in the treatment of oleander toxicosis in a dog, which has not previously been published in veterinary literature. Oleander poisoning can be associated with permanent cardiac arrhythmias due to the ischemic damage. © Veterinary Emergency and Critical Care Society 2017.

Reply to "Further issues in determining the readability of self-report items: comment on McHugh and Behar (2009)".

PubMed

McHugh, R Kathryn; Behar, Evelyn

2012-12-01

In his commentary on our previously published article "Readability of Self-Report Measures of Depression and Anxiety," J. Schinka (2012) argued for the importance of considering readability of patient materials and highlighted limitations of existing methodologies for this assessment. Schinka's commentary articulately described the weaknesses of readability assessment and emphasized the importance of the development of improved strategies for assessing readability to maximize the validity of self-report measures in applied settings. In our reply, we support and extend Schinka's argument, highlighting the importance of consideration of the range of factors (e.g., use of reverse-scored items) that may increase respondent difficulty with comprehension. Consideration of the readability of self-report symptom measures is critical to the validity of these measures in both clinical practice and research settings.

REMARK checklist elaborated to improve tumor prognostician

Cancer.gov

Experts have elaborated on a previously published checklist of 20 items -- including descriptions of design, methods, and analysis -- that researchers should address when publishing studies of prognostic markers. These markers are indicators that enable d

Soil simulant sourcing for the ExoMars rover testbed

NASA Astrophysics Data System (ADS)

Gouache, Thibault P.; Patel, Nildeep; Brunskill, Christopher; Scott, Gregory P.; Saaj, Chakravarthini M.; Matthews, Marcus; Cui, Liang

2011-06-01

ExoMars is the European Space Agency (ESA) mission to Mars planned for launch in 2018, focusing on exobiology with the primary objective of searching for any traces of extant or extinct carbon-based micro-organisms. The on-surface mission is performed by a near-autonomous mobile robotic vehicle (also referred to as the rover) with a mission design life of 180 sols (Patel et al., 2010). In order to obtain useful data on the tractive performance of the ExoMars rover before flight, it is necessary to perform mobility tests on representative soil simulant materials producing a Martian terrain analogue under terrestrial laboratory conditions. Three individual types of regolith shown to be found extensively on the Martian surface were identified for replication using commercially available terrestrial materials, sourced from UK sites in order to ensure easy supply and reduce lead times for delivery. These materials (also referred to as the Engineering Soil (ES-x) simulants) are: a fine dust analogue (ES-1); a fine aeolian sand analogue (ES-2); and a coarse sand analogue (ES-3). Following a detailed analysis, three fine sand regolith types were identified from commercially available products. Each material was used in its off-the-shelf state, except for ES-2, where further processing methods were used to reduce the particle size range. These materials were tested to determine their physical characteristics, including the particle size distribution, particle density, particle shape (including angularity/sphericity) and moisture content. The results are analysed to allow comparative analysis with existing soil simulants and the published results regarding in situ analysis of Martian soil on previous NASA (National Aeronautics and Space Administration) missions. The findings have shown that in some cases material properties vary significantly from the specifications provided by material suppliers. This has confirmed the need for laboratory testing to determine the actual parameters to prove that standard geotechnical processes are indeed suitable. The outcomes have allowed the confirmation of each simulant material as suitable for replicating their respective regolith types.

Trends in the Newspaper Budget.

ERIC Educational Resources Information Center

Simon, Kathryn; Bishop, Robert L.

Using data published by "Editor & Publisher," annual reports, and confidential material made available by publishers, this paper examines budgets for papers of varying sizes from 1947 to 1974. While expenses have been increasing more rapidly than revenue since 1947, newspapers are above average in rate of return on revenue. Earnings of 15% after…

Sight-Singing: Ten Years of Published Research

ERIC Educational Resources Information Center

Kuehne, Jane M.

2010-01-01

The purpose of this article was to review published research on sight-singing from the past 10 years, 1998-2008. Several authors published research in various areas in sight-singing. These included festival availability and participation, time use in sight-singing adjudication, method and materials, strategies of successful students, assessing…

24 CFR 84.36 - Intangible property.

Code of Federal Regulations, 2012 CFR

2012-04-01

...” material excludes physical objects (e.g., laboratory samples). Research data also do not include: (A) Trade... study. (ii) Published is defined as either when: (A) Research findings are published in a peer-reviewed...) request for research data relating to published research findings produced under an award that were used...

24 CFR 84.36 - Intangible property.

Code of Federal Regulations, 2013 CFR

2013-04-01

...” material excludes physical objects (e.g., laboratory samples). Research data also do not include: (A) Trade... study. (ii) Published is defined as either when: (A) Research findings are published in a peer-reviewed...) request for research data relating to published research findings produced under an award that were used...

24 CFR 84.36 - Intangible property.

Code of Federal Regulations, 2014 CFR

2014-04-01

...” material excludes physical objects (e.g., laboratory samples). Research data also do not include: (A) Trade... study. (ii) Published is defined as either when: (A) Research findings are published in a peer-reviewed...) request for research data relating to published research findings produced under an award that were used...

24 CFR 84.36 - Intangible property.

Code of Federal Regulations, 2010 CFR

2010-04-01

...” material excludes physical objects (e.g., laboratory samples). Research data also do not include: (A) Trade... study. (ii) Published is defined as either when: (A) Research findings are published in a peer-reviewed...) request for research data relating to published research findings produced under an award that were used...

24 CFR 84.36 - Intangible property.

Code of Federal Regulations, 2011 CFR

2011-04-01

...” material excludes physical objects (e.g., laboratory samples). Research data also do not include: (A) Trade... study. (ii) Published is defined as either when: (A) Research findings are published in a peer-reviewed...) request for research data relating to published research findings produced under an award that were used...

Reflections on the Journal of Applied Psychology for 1989 to 1994: Changes in major research themes and practices over 25 years.

PubMed

Schmitt, Neal

2017-03-01

Informal observations concerning journal content indicates that research investigating organizational behavior topics, including work on the structure of groups and determinants and consequences of group process along with the role of leadership in groups, has increased. Some topics have disappeared (e.g., job analysis, human factors, union-related work, consumer behavior) and others are declining (e.g., research methods, psychometrics). Perhaps the biggest change is in the length of articles, which is mostly a function of the inclusion of greater numbers of references and appendix material. Publishing some of this material in supplementary online materials is now current practice in the Journal of Applied Psychology. Concerns about use of journal space may also be entirely moot, if electronic publishing as opposed to print publishing becomes the norm. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

From the Board of Editors: on Plagiarism

NASA Astrophysics Data System (ADS)

2005-04-01

Dear Colleagues: There has been a significant increase in the number of duplicate submissions and plagiarism cases reported in all major journals, including the journals of the Optical Society of America. Duplicate submissions and plagiarism can take many forms, and all of them are violations of professional ethics, the copyright agreement that an author signs along with the submission of a paper, and OSA's published Author Guidelines. There must be a significant component of new science for a paper to be publishable. The copying of large segments of text from previously published or in-press papers with only minor cosmetic changes is not acceptable and can lead to the rejection of papers. Duplicate submission: Duplicate submission is the most common ethics violation encountered. Duplicate submission is the submission of substantially similar papers to more than one journal. There is a misperception in a small fraction of the scientific community that duplicate submission is acceptable because it sometimes takes a long time to get a paper reviewed and because one of the papers can be withdrawn at any time. This is a clear violation of professional ethics and of the copyright agreement that is signed on submission. Duplicate submission harms the whole community because editors and reviewers waste their time and in the process compound the time it takes to get a paper reviewed for all authors. In cases of duplicate submission, the Editor of the affected OSA journal will consult with the Editor of the other journal involved to determine the proper course of action. Often that action will be the rejection of both papers. Plagiarism: Plagiarism is a serious breach of ethics and is defined as the substantial replication, without attribution, of significant elements of another document already published by the same or other authors. Two types of plagiarism can occur-self-plagiarism and plagiarism from others' works. Self-plagiarism is the publication of substantially similar scientific content of one's own in the same or different journals. Self-plagiarism causes duplicate papers in the scientific literature, violates copyright agreements, and unduly burdens reviewers, editors, and the scientific publishing enterprise. Plagiarism from others' works constitutes the most offensive form of plagiarism. Effectively, it is using someone else's work as if it is your own. Any text, equations, ideas, or figures taken from another paper or work must be specifically acknowledged as they occur in that paper or work. Figures, tables, or other images reproduced from another source normally require permission from the publisher. Text or concepts can, for example, be quoted as follows: "As stated by xxx (name of lead author), "text" [reference]." Action on Notification of Allegations of Plagiarism: OSA identifies an act of plagiarism in a published document to be the substantial replication, without appropriate attribution, of significant elements of another document already published by the same or other authors. OSA has implemented a process for dealing with cases of plagiarism. When the Editor-in-Chief of a journal is notified of an instance of either of the two possible forms of plagiarism discussed above, he or she will make a preliminary investigation of the allegations, including a request for the accused authors to explain the situation. If further action is justified, then the Editor-in-Chief will convene a panel consisting of the Editor-in-Chief of the OSA journal involved, the Chair of the Board of Editors, and the Senior Director of Publications. Their unanimous decision confirming that an act of plagiarism has occurred requires the insertion of the following statement in the official OSA electronic record of the plagiarizing article: "It has come to the attention of the Optical Society of America that this article should not have been submitted owing to its substantial replication, without appropriate attribution, of significant elements found in the following previously published material: [citation data-including the authors, journal title, full citation of the earlier published material.]" The same statement shall be added to the next available print run of the journal in an appropriate location such as a "Notice to Readers."

From the Board of Editors: on Plagiarism

NASA Astrophysics Data System (ADS)

2005-03-01

Dear Colleagues: There has been a significant increase in the number of duplicate submissions and plagiarism cases reported in all major journals, including the journals of the Optical Society of America. Duplicate submissions and plagiarism can take many forms, and all of them are violations of professional ethics, the copyright agreement that an author signs along with the submission of a paper, and OSA's published Author Guidelines. There must be a significant component of new science for a paper to be publishable. The copying of large segments of text from previously published or in-press papers with only minor cosmetic changes is not acceptable and can lead to the rejection of papers. Duplicate submission is the most common ethics violation encountered. Duplicate submission is the submission of substantially similar papers to more than one journal. There is a misperception in a small fraction of the scientific community that duplicate submission is acceptable because it sometimes takes a long time to get a paper reviewed and because one of the papers can be withdrawn at any time. This is a clear violation of professional ethics and of the copyright agreement that is signed on submission. Duplicate submission harms the whole community because editors and reviewers waste their time and in the process compound the time it takes to get a paper reviewed for all authors. In cases of duplicate submission, the Editor of the affected OSA journal will consult with the Editor of the other journal involved to determine the proper course of action. Often that action will be the rejection of both papers. Plagiarism: Plagiarism is a serious breach of ethics and is defined as the substantial replication, without attribution, of significant elements of another document already published by the same or other authors. Two types of plagiarism can occur-self-plagiarism and plagiarism from others' works. Self-plagiarism is the publication of substantially similar scientific content of one's own in the same or different journals. Self-plagiarism causes duplicate papers in the scientific literature, violates copyright agreements, and unduly burdens reviewers, editors, and the scientific publishing enterprise. Plagiarism from others' works constitutes the most offensive form of plagiarism. Effectively, it is using someone else's work as if it is your own. Any text, equations, ideas, or figures taken from another paper or work must be specifically acknowledged as they occur in that paper or work. Figures, tables, or other images reproduced from another source normally require permission from the publisher. Text or concepts can, for example, be quoted as follows: "As stated by xxx (name of lead author), "text" [reference]." Action on Notification of Allegations of Plagiarism: OSA identifies an act of plagiarism in a published document to be the substantial replication, without appropriate attribution, of significant elements of another document already published by the same or other authors. OSA has implemented a process for dealing with cases of plagiarism. When the Editor-in-Chief of a journal is notified of an instance of either of the two possible forms of plagiarism discussed above, he or she will make a preliminary investigation of the allegations, including a request for the accused authors to explain the situation. If further action is justified, then the Editor-in-Chief will convene a panel consisting of the Editor-in-Chief of the OSA journal involved, the Chair of the Board of Editors, and the Senior Director of Publications. Their unanimous decision confirming that an act of plagiarism has occurred requires the insertion of the following statement in the official OSA electronic record of the plagiarizing article: "It has come to the attention of the Optical Society of America that this article should not have been submitted owing to its substantial replication, without appropriate attribution, of significant elements found in the following previously published material: [citation data-including the authors, journal title, full citation of the earlier published material.]" The same statement shall be added to the next available print run of the journal in an appropriate location such as a "Notice to Readers." The OSA Board of Editors

From the Board of Editors: on Plagiarism

NASA Astrophysics Data System (ADS)

2005-05-01

Dear Colleagues: There has been a significant increase in the number of duplicate submissions and plagiarism cases reported in all major journals, including the journals of the Optical Society of America. Duplicate submissions and plagiarism can take many forms, and all of them are violations of professional ethics, the copyright agreement that an author signs along with the submission of a paper, and OSA's published Author Guidelines. There must be a significant component of new science for a paper to be publishable. The copying of large segments of text from previously published or in-press papers with only minor cosmetic changes is not acceptable and can lead to the rejection of papers. Duplicate submission: Duplicate submission is the most common ethics violation encountered. Duplicate submission is the submission of substantially similar papers to more than one journal. There is a misperception in a small fraction of the scientific community that duplicate submission is acceptable because it sometimes takes a long time to get a paper reviewed and because one of the papers can be withdrawn at any time. This is a clear violation of professional ethics and of the copyright agreement that is signed on submission. Duplicate submission harms the whole community because editors and reviewers waste their time and in the process compound the time it takes to get a paper reviewed for all authors. In cases of duplicate submission, the Editor of the affected OSA journal will consult with the Editor of the other journal involved to determine the proper course of action. Often that action will be the rejection of both papers. Plagiarism: Plagiarism is a serious breach of ethics and is defined as the substantial replication, without attribution, of significant elements of another document already published by the same or other authors. Two types of plagiarism can occur-self-plagiarism and plagiarism from others' works. Self-plagiarism is the publication of substantially similar scientific content of one's own in the same or different journals. Self-plagiarism causes duplicate papers in the scientific literature, violates copyright agreements, and unduly burdens reviewers, editors, and the scientific publishing enterprise. Plagiarism from others' works constitutes the most offensive form of plagiarism. Effectively, it is using someone else's work as if it is your own. Any text, equations, ideas, or figures taken from another paper or work must be specifically acknowledged as they occur in that paper or work. Figures, tables, or other images reproduced from another source normally require permission from the publisher. Text or concepts can, for example, be quoted as follows: "As stated by xxx (name of lead author), "text" [reference]." Action on Notification of Allegations of Plagiarism: OSA identifies an act of plagiarism in a published document to be the substantial replication, without appropriate attribution, of significant elements of another document already published by the same or other authors. OSA has implemented a process for dealing with cases of plagiarism. When the Editor-in-Chief of a journal is notified of an instance of either of the two possible forms of plagiarism discussed above, he or she will make a preliminary investigation of the allegations, including a request for the accused authors to explain the situation. If further action is justified, then the Editor-in-Chief will convene a panel consisting of the Editor-in-Chief of the OSA journal involved, the Chair of the Board of Editors, and the Senior Director of Publications. Their unanimous decision confirming that an act of plagiarism has occurred requires the insertion of the following statement in the official OSA electronic record of the plagiarizing article: "It has come to the attention of the Optical Society of America that this article should not have been submitted owing to its substantial replication, without appropriate attribution, of significant elements found in the following previously published material: [citation data-including the authors, journal title, full citation of the earlier published material.]" The same statement shall be added to the next available print run of the journal in an appropriate location such as a "Notice to Readers."

From the Board of Editors: on Plagiarism

NASA Astrophysics Data System (ADS)

2005-04-01

From the Board of Editors: on Plagiarism

"It has come to the attention of the Optical Society of America that this article should not have been submitted owing to its substantial replication, without appropriate attribution, of significant elements found in the following previously published material: [citation data-including the authors, journal title, full citation of the earlier published material.]"

Justice and Due Process.

ERIC Educational Resources Information Center

McKinney-Browning, Mabel C.

1981-01-01

Presents a directory of educational materials in the areas of justice and due process. Materials are listed in three categories--films, books, and project-created materials. For each entry, information is presented on title, author, publisher or developer, publication date, price, and annotation. (DB)

New experimental stopping power data of 4He, 16O, 40Ar, 48Ca and 84Kr projectiles in different solid materials

NASA Astrophysics Data System (ADS)

Trzaska, W. H.; Knyazheva, G. N.; Perkowski, J.; Andrzejewski, J.; Khlebnikov, S. V.; Kozulin, E. M.; Malkiewicz, T.; Mutterer, M.; Savelieva, E. O.

2018-03-01

New experimental data on energy loss of 4He, 16O, 40Ar, 48Ca and 84Kr ions in thin, self-supporting foils of C, Al, Ni, Ag, Lu, Au, Pb and Th are presented. The measurements, using the TOF-E method, were done in a very broad energy range around the stopping power maximum; typically from 0.1 to 11 MeV/u. When available, the extracted stopping power values are compared with the previously published data. The overall agreement is good although a fair comparison is difficult as the covered energy range is much larger than in previous measurements. The small error bars and a broad coverage allowed us to test the predictions of theoretical codes: PASS, CasP, and semi-empirical programs: SRIM, LET, MSTAR, and the Hubert table predictions. The deviations of PASS predictions from the experimental data do not exceed 20% for all the measured combinations. CasP predictions are within 15% from the data for heavier ions but diverge up to 40% for lighter ions. Semi-empirical approaches, including SRIM, deviate from the experimental data by less than 5% for the regions already covered by previous experiments but err by about 10-20% for the ion/target combinations that were not measured before: Ca in Lu as well as Kr in Lu, Pb, and Th.

PREFACE: MRS International Materials Research Conference (IMRC-2008)

NASA Astrophysics Data System (ADS)

Wang, Zhanguo; Qiu, Yong; Li, Yongxiang

2009-03-01

This volume contains selected papers presented at the MRS International Materials Research Conference (IMRC-2008) held in Chongqing, China, 9-12 June 2008. IMRC-2008 included 9 symposia of A. Eco/Environmental Materials, B. Sustainable Energy Materials, C. Electronic Packaging Materials, D. Electronic Materials, E. Materials and Processes for Flat-panel Displays, F. Functional Ceramics, G. Transportation Materials, H. Magnesium and I. Biomaterials for Medical Applications. Nearly 1200 participants from 33 countries attended the conference, and the conference organizers received more than 700 papers. After the peer review processes, 555 papers were selected to be published in 9 Journals or proceedings, including J. of Materials Research (JMR), Rare Metal Materials and Engineering, J. of Univ. Science and Technology Beijing, Biomedical Materials: Materials for Tissue Engineering and Regenerative Medicine, Chinese Journal of Aeronautics, Materials Science Forum, and Journal of Physics: Conference Series. Among the 555 selected papers, 91 papers are published in this volume, and the topics mainly cover electronic matrials, processes for flat-panel displays and functional ceramics. The editors would like to give special thanks to the graduate students Liwu Jiang, Ming Li and Di He from Beihang University for their hard work compiling and typesetting each paper in this volume. Zhanguo Wang, Yong Qiu and Yongxiang Li Editors

A BIBLIOGRAPHY OF BIOLOGICAL APPLICATIONS OF AUTORADIOGRAPHY, 1958 THROUGH 1959

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnston, M.E.

1959-08-01

This bibliography of 281 reports and published literature references on biological applications of autoradiography is a supplement to the one published July 1958 as UCRL-8400. References previously omitted are included. (J.E. D.)

A second chance for authors of hijacked journals to publish in legitimate journals.

PubMed

Jalalian, Mehrdad

2015-01-01

This article proposes the republication of articles that have previously been published in counterfeit websites of hijacked journals. The paper also discusses the technical and ethical aspects of republishing such articles.

Publisher Correction: Measuring progress from nationally determined contributions to mid-century strategies

NASA Astrophysics Data System (ADS)

Iyer, Gokul; Ledna, Catherine; Clarke, Leon; Edmonds, James; McJeon, Haewon; Kyle, Page; Williams, James H.

2018-03-01

In the version of this Article previously published, technical problems led to the wrong summary appearing on the homepage, and an incorrect Supplementary Information file being uploaded. Both errors have now been corrected.

The angular structure of ONC201, a TRAIL pathway-inducing compound, determines its potent anti-cancer activity

PubMed Central

Wagner, Jessica; Kline, Christina Leah; Pottorf, Richard S.; Nallaganchu, Bhaskara Rao; Olson, Gary L.; Dicker, David T.; Allen, Joshua E.; El-Deiry, Wafik S.

2014-01-01

We previously identified TRAIL-inducing compound 10 (TIC10), also known as NSC350625 or ONC201, from a NCI chemical library screen as a small molecule that has potent anti-tumor efficacy and a benign safety profile in preclinical cancer models. The chemical structure that was originally published by Stahle, et. al. in the patent literature was described as an imidazo[1,2-a]pyrido[4,3-d]pyrimidine derivative. The NCI and others generally accepted this as the correct structure, which was consistent with the mass spectrometry analysis outlined in the publication by Allen et. al. that first reported the molecule's anticancer properties. A recent publication demonstrated that the chemical structure of ONC201 material from the NCI is an angular [3,4-e] isomer of the originally disclosed, linear [4,3-d] structure. Here we confirm by NMR and X-ray structural analysis of the dihydrochloride salt form that the ONC201 material produced by Oncoceutics is the angular [3,4-e] structure and not the linear structure originally depicted in the patent literature and by the NCI. Similarly, in accordance with our biological evaluation, the previously disclosed anti-cancer activity is associated with the angular structure and not the linear isomer. Together these studies confirm that ONC201, produced by Oncoceutics or obtained from the NCI, possesses an angular [3,4-e] structure that represents the highly active anti-cancer compound utilized in prior preclinical studies and now entering clinical trials in advanced cancers. PMID:25587031

The angular structure of ONC201, a TRAIL pathway-inducing compound, determines its potent anti-cancer activity.

PubMed

Wagner, Jessica; Kline, Christina Leah; Pottorf, Richard S; Nallaganchu, Bhaskara Rao; Olson, Gary L; Dicker, David T; Allen, Joshua E; El-Deiry, Wafik S

2014-12-30

We previously identified TRAIL-inducing compound 10 (TIC10), also known as NSC350625 or ONC201, from a NCI chemical library screen as a small molecule that has potent anti-tumor efficacy and a benign safety profile in preclinical cancer models. The chemical structure that was originally published by Stahle, et. al. in the patent literature was described as an imidazo[1,2-a]pyrido[4,3-d]pyrimidine derivative. The NCI and others generally accepted this as the correct structure, which was consistent with the mass spectrometry analysis outlined in the publication by Allen et. al. that first reported the molecule's anticancer properties. A recent publication demonstrated that the chemical structure of ONC201 material from the NCI is an angular [3,4-e] isomer of the originally disclosed, linear [4,3-d] structure. Here we confirm by NMR and X-ray structural analysis of the dihydrochloride salt form that the ONC201 material produced by Oncoceutics is the angular [3,4-e] structure and not the linear structure originally depicted in the patent literature and by the NCI. Similarly, in accordance with our biological evaluation, the previously disclosed anti-cancer activity is associated with the angular structure and not the linear isomer. Together these studies confirm that ONC201, produced by Oncoceutics or obtained from the NCI, possesses an angular [3,4-e] structure that represents the highly active anti-cancer compound utilized in prior preclinical studies and now entering clinical trials in advanced cancers.

The effect of processing temperature and time on the structure and fracture characteristics of self-reinforced composite poly(methyl methacrylate).

PubMed

Wright, D D; Gilbert, J L; Lautenschlager, E P

1999-08-01

A novel material, self-reinforced composite poly(methyl methacrylate) (SRC-PMMA) has been previously developed in this laboratory. It consists of high-strength PMMA fibers embedded in a matrix of PMMA derived from the fibers. As a composite material, uniaxial SRC-PMMA has been shown to have greatly improved flexural, tensile, fracture toughness and fatigue properties when compared to unreinforced PMMA. Previous work examined one empirically defined processing condition. This work systematically examines the effect of processing time and temperature on the thermal properties, fracture toughness and fracture morphology of SRC-PMMA produced by a hot compaction method. Differential scanning calorimetry (DSC) shows that composites containing high amounts of retained molecular orientation exhibit both endothermic and exothermic peaks which depend on processing times and temperatures. An exothermic release of energy just above Tg is related to the release of retained molecular orientation in the composites. This release of energy decreases linearly with increasing processing temperature or time for the range investigated. Fracture toughness results show a maximum fracture toughness of 3.18 MPa m1/2 for samples processed for 65 min at 128 degrees C. Optimal structure and fracture toughness are obtained in composites which have maximum interfiber bonding and minimal loss of molecular orientation. Composite fracture mechanisms are highly dependent on processing. Low processing times and temperatures result in more interfiber/matrix fracture, while higher processing times and temperatures result in higher ductility and more transfiber fracture. Excessive processing times result in brittle failure. Copyright 1999 Kluwer Academic Publishers

State-of-the-art of waste wood supply chain in Germany and selected European countries.

PubMed

Garcia, Carlos A; Hora, Guido

2017-12-01

According to the statistic office of the European Union (Eurostat), Germany is the main producer of waste wood in Europe followed by France, United Kingdom, Italy and Finland. Based on the characteristics of the waste wood, it can be classified in four (4) categories: A I, A II, A III and A IV. This paper focuses in the A I waste wood since is the only category able to be used directly for both material and energy purposes without a previously pre-treatment. Currently, most of this waste wood is used for direct energy production due to the previous government legislation that promoted its use directly in incineration facilities. However, the newest Renewable Energy Act (EEG 2017) may promote the cascade-use of A I waste wood prior to be intended for energy purposes. Nonetheless, the government incentives to the energy sector is not the only bottleneck that the use of A I waste wood as raw material in the wood-based industry has to overcome. The peak availability, collection logistics (collection centers and transportation) and recycling facility location are some of the parameters that must be considered in order to design the "best" supply chain network for A I waste wood. This work presents a detailed description of the effect of the hierarchical strategic decision in the proper design of the waste wood supply chain. Additionally, the global picture of waste wood recycling in different European countries (UK, Italy and Finland) is briefly presented. Copyright © 2017. Published by Elsevier Ltd.

Exploring the mechanical behavior of degrading swine neural tissue at low strain rates via the fractional Zener constitutive model.

PubMed

Bentil, Sarah A; Dupaix, Rebecca B

2014-02-01

The ability of the fractional Zener constitutive model to predict the behavior of postmortem swine brain tissue was examined in this work. Understanding tissue behavior attributed to degradation is invaluable in many fields such as the forensic sciences or cases where only cadaveric tissue is available. To understand how material properties change with postmortem age, the fractional Zener model was considered as it includes parameters to describe brain stiffness and also the parameter α, which quantifies the viscoelasticity of a material. The relationship between the viscoelasticity described by α and tissue degradation was examined by fitting the model to data collected in a previous study (Bentil, 2013). This previous study subjected swine neural tissue to in vitro unconfined compression tests using four postmortem age groups (<6h, 24h, 3 days, and 1 week). All samples were compressed to a strain level of 10% using two compressive rates: 1mm/min and 5mm/min. Statistical analysis was used as a tool to study the influence of the fractional Zener constants on factors such as tissue degradation and compressive rate. Application of the fractional Zener constitutive model to the experimental data showed that swine neural tissue becomes less stiff with increased postmortem age. The fractional Zener model was also able to capture the nonlinear viscoelastic features of the brain tissue at low strain rates. The results showed that the parameter α was better correlated with compressive rate than with postmortem age. © 2013 Published by Elsevier Ltd.

Calibration strategies for the determination of stable carbon absolute isotope ratios in a glycine candidate reference material by elemental analyser-isotope ratio mass spectrometry.

PubMed

Dunn, Philip J H; Malinovsky, Dmitry; Goenaga-Infante, Heidi

2015-04-01

We report a methodology for the determination of the stable carbon absolute isotope ratio of a glycine candidate reference material with natural carbon isotopic composition using EA-IRMS. For the first time, stable carbon absolute isotope ratios have been reported using continuous flow rather than dual inlet isotope ratio mass spectrometry. Also for the first time, a calibration strategy based on the use of synthetic mixtures gravimetrically prepared from well characterised, highly (13)C-enriched and (13)C-depleted glycines was developed for EA-IRMS calibration and generation of absolute carbon isotope ratio values traceable to the SI through calibration standards of known purity. A second calibration strategy based on converting the more typically determined delta values on the Vienna PeeDee Belemnite (VPDB) scale using literature values for the absolute carbon isotope ratio of VPDB itself was used for comparison. Both calibration approaches provided results consistent with those previously reported for the same natural glycine using MC-ICP-MS; absolute carbon ratios of 10,649 × 10(-6) with an expanded uncertainty (k = 2) of 24 × 10(-6) and 10,646 × 10(-6) with an expanded uncertainty (k = 2) of 88 × 10(-6) were obtained, respectively. The absolute carbon isotope ratio of the VPDB standard was found to be 11,115 × 10(-6) with an expanded uncertainty (k = 2) of 27 × 10(-6), which is in excellent agreement with previously published values.

Pilot Guidelines for Improving Instructional Materials Through the Process of Learner Verification and Revision.

ERIC Educational Resources Information Center

Educational Products Information Exchange Inst., Stony Brook, NY.

Learner Verification and Revision (LVR) Process of Instructional Materials is an ongoing effort for the improvement of instructional materials based on systematic feedback from learners who have used the materials. This evaluation gives publishers a method of identifying instructional strengths and weaknesses of a product and provides an…

10 CFR 431.443 - Materials incorporated by reference.

Code of Federal Regulations, 2014 CFR

2014-01-01

... the date of the approval and a notice of any change in the material will be published in the Federal... 10 Energy 3 2014-01-01 2014-01-01 false Materials incorporated by reference. 431.443 Section 431... AND INDUSTRIAL EQUIPMENT Small Electric Motors Test Procedures § 431.443 Materials incorporated by...

Resource Guide to Educational Materials about Agriculture. A Project of Agriculture in the Classroom.

ERIC Educational Resources Information Center

Department of Agriculture, Washington, DC. Office of the Secretary.

Designed to help teachers bring more information about agriculture into their classrooms, this resource guide provides a listing of materials relating to agriculture available from private and public sources. It describes materials available from more than 300 organizations and publishers who responded to a request regarding materials they were…

Ethical guidelines for publishing in the journal of cachexia, sarcopenia and muscle: update 2017.

PubMed

von Haehling, Stephan; Morley, John E; Coats, Andrew J S; Anker, Stefan D

2017-12-01

This article details an updated version of the principles of ethical authorship and publishing in the Journal of Cachexia, Sarcopenia and Muscle (JCSM). At the time of submission to JCSM, the corresponding author, on behalf of all co-authors, needs to certify adherence to these principles. The principles are as follows: All authors listed on a manuscript considered for publication have approved its submission and (if accepted) publication as provided to JCSM. No person who has a right to be recognized as author has been omitted from the list of authors on the submitted manuscript. Each author has made a material and independent contribution to the work submitted for publication. The submitted work is original and is neither under consideration elsewhere nor that it has been published previously in whole or in part other than in abstract form. All authors certify that the work is original and does not contain excessive overlap with prior or contemporaneous publication elsewhere, and where the publication reports on cohorts, trials, or data that have been reported on before these other publications must be referenced. All original research work has been approved by the relevant bodies such as institutional review boards or ethics committees. All conflicts of interest, financial or otherwise, that may affect the authors' ability to present data objectively, and relevant sources of funding have been duly declared in the manuscript. The manuscript in its published form will be maintained on the servers of JCSM as a valid publication only as long as all statements in the guidelines on ethical publishing remain true. If any of the aforementioned statements ceases to be true, the authors have a duty to notify the Editors of JCSM as soon as possible so that the available information regarding the published article can be updated and/or the manuscript can be withdrawn. © 2017 The Authors. Journal of Cachexia, Sarcopenia and Muscle published by John Wiley & Sons Ltd on behalf of the Society on Sarcopenia, Cachexia and Wasting Disorders.

Career Information: Marketing and Distribution. Revised.

ERIC Educational Resources Information Center

American Vocational Association, Washington, DC. Distributive Education Div.

A compilation of career information materials in the field of marketing and distribution is presented. The materials, produced in 1969-74, were collected from publishers; professional organizations; trade associations; individual businesses; colleges; universities; and Federal, State, and local government agencies. The materials were reviewed on…

Geophysical abstracts 167, October-December 1956

USGS Publications Warehouse

Rabbitt, Mary C.; Vitaliano, Dorothy B.; Vesselowsky, S.T.; ,

1956-01-01

Geophysical Abstracts includes abstracts of technical papers and books on the physics of the solid earth, the application of physical methods and techniques to geologic problems, and geophysical exploration. The table of contents, which is alphabetically arranged, shows the material covered.Abstracts are prepared only of material that is believed to be generally available. Ordinarily abstracts are not published of material with limited circulation (such as dissertations, open-file reports, or memoranda) or of other papers presented orally at meetings unless summaries of substantial length are published. Abstracts of papers in Japanese and Chinese are based on abstracts or summaries in a western language accompanying the paper.

Geophysical abstracts 164, January-March 1956

USGS Publications Warehouse

Rabbitt, Mary C.; Vitaliano, Dorothy B.; Vesselowsky, S.T.; ,

1956-01-01

Geophysical Abstracts includes abstracts of technical papers and books on the physics of the solid earth, the application of physical methods and techniques to geologic problems, and geophysical exploration. A new table of contents, alphabetically arranged, has been adapted to show more clearly the material covered.Abstracts are prepared only of material that is believed to be generally available. Ordinarily abstracts are not published of material with limited circulation (such as dissertations, open-file reports, or memoranda) or of papers presented orally at meetings unless summaries of substantial length are published. Abstracts of papers in Japanese and Chinese are based on abstracts or summaries in a western language accompanying the paper.

Geophysical abstracts 166, July-September 1956

USGS Publications Warehouse

Rabbitt, Mary C.; Vitaliano, Dorothy B.; Vesselowsky, S.T.; ,

1956-01-01

Geophysical Abstracts includes abstracts of technical papers and books on the physics of the solid earth, the application of physical methods and techniques to geologic problems, and geophysical exploration. The table of contents, which is alphabetically arranged, shows the material covered.Abstracts are prepared only of material that is believed to be generally available. Ordinarily abstracts are not published of material with limited circulation (such as dissertations, open-file reports, or memoranda) or of other papers presented orally at meetings unless summaries of substantial length are published. Abstracts of papers in Japanese and Chinese are based on abstracts or summaries in a western language accompanying the paper.

Geophysical abstracts 165, April-June 1956

USGS Publications Warehouse

Rabbitt, Mary C.; Vitaliano, Dorothy B.; Vesselowsky, S.T.; ,

1956-01-01

Geophysical Abstracts includes abstracts of technical papers and books on the physics of the solid earth, the application of physical methods and techniques to geologic problems, and geophysical exploration. The table of contents, which is alphabetically arranged, shows the material covered.Abstracts are prepared only of material that is believed to be generally available. Ordinarily abstracts are not published of material with limited circulation (such as dissertations, open-file reports, or memoranda) or of other papers presented orally at meetings unless summaries of substantial length are published. Abstracts of papers in Japanese and Chinese are based on abstracts or summaries in a western language accompanying the paper.

Nuclear forensic analysis of a non-traditional actinide sample.

PubMed

Doyle, Jamie L; Kuhn, Kevin; Byerly, Benjamin; Colletti, Lisa; Fulwyler, James; Garduno, Katherine; Keller, Russell; Lujan, Elmer; Martinez, Alexander; Myers, Steve; Porterfield, Donivan; Spencer, Khalil; Stanley, Floyd; Townsend, Lisa; Thomas, Mariam; Walker, Laurie; Xu, Ning; Tandon, Lav

2016-10-01

Nuclear forensic publications, performance tests, and research and development efforts typically target the bulk global inventory of intentionally safeguarded materials, such as plutonium (Pu) and uranium (U). Other materials, such as neptunium (Np), pose a nuclear security risk as well. Trafficking leading to recovery of an interdicted Np sample is a realistic concern especially for materials originating in countries that reprocesses fuel. Using complementary forensic methods, potential signatures for an unknown Np oxide sample were investigated. Measurement results were assessed against published Np processes to present hypotheses as to the original intended use, method of production, and origin for this Np oxide. Published by Elsevier B.V.

ESR and U-series analyses of faunal material from Cuddie Springs, NSW, Australia: implications for the timing of the extinction of the Australian megafauna

NASA Astrophysics Data System (ADS)

Grün, Rainer; Eggins, Stephen; Aubert, Maxime; Spooner, Nigel; Pike, Alistair W. G.; Müller, Wolfgang

2010-03-01

The timing and cause of late Pleistocene faunal extinctions in Australia are subjects of a debate that has become polarised by two vigorously defended views. One contends that the late Pleistocene extinction was a short event caused by humans colonising the Australian continent, whereas the other promotes a gradual demise of the fauna, over a period of at least 10-20 ka, due to a combination of climatic changes and ecological pressures by humans. Cuddie Springs is central to this debate as it is the only site known in continental Australia where archaeological and megafauna remains co-occur. We have analysed more than 60 bones and teeth from the site by laser ablation ICP-MS to determine U, and Th concentrations and distributions, and those with sufficiently high U concentrations were analysed for U-series isotopes. Twenty-nine teeth were analysed by ESR. These new results, as well as previously published geochronological data, contradict the hypothesis that the clastic sediments of Stratigraphic Unit 6 (SU6) are in primary context with the faunal, archaeological and other materials found in SU6, and that all have ages consistent with the optically stimulated luminescence (OSL) estimates of 30-36 ka. These young OSL results were used to argue for a relatively recent age of the extinct fauna. Our results imply that SU6 is either significantly older than the OSL results, or that a large fraction of the faunal material and the charcoal found in SU6 was derived from older, lateral deposits. Our U and Th laser ablation ICPMS results as well as the REE profiles reported by Trueman et al. [2008. Comparing rates of recystallisation and the potential for preservation of biomolecules from the distribution of trace elements in fossil bones. C.R. Palevol. General Paleontology (Taphonomy and Fossilization) 7, 145-158] contradict the interpretation of previously reported rare earth element compositions of bones, and the argument based thereon for the primary context of faunal material and clastic sediments in SU6 layers.

Double-peaked broad line emission from the LINER nucleus of NGC 1097

NASA Technical Reports Server (NTRS)

Storchi-Bergmann, Thaisa; Baldwin, Jack A.; Wilson, Andrew S.

1993-01-01

We report the recent appearance of a very broad component in the H-alpha and H-beta emission lines of the weakly active nucleus of the Sersic-Pastoriza galaxy NGC 1097. The FWZI of the broad component is about 21,000 km/s, and its profile is double-peaked; the presence of a blue, featureless continuum in the nucleus is also suggested. The broad component was first observed in H-alpha in November 2, 1991, and confirmed 11 months later. The H-alpha profile and flux did not change in this time interval. Comparison with previously published spectral data indicates that the broad lines have only recently appeared. Together with the relatively high X-ray luminosity and the compact nuclear radio source, our results characterize the presence of a Seyfert 1 nucleus in a galaxy which had previously shown only LINER characteristics. Obscuring material along our line of sight to the nucleus appears to have recently cleared, permitting a direct view of the active nucleus. We discuss two possible structures for the broad line region, biconical outflow and an accretion disk, that could give rise to the observed profile.

A revision of the genus Muricea Lamouroux, 1821 (Anthozoa, Octocorallia) in the eastern Pacific. Part II

PubMed Central

Breedy, Odalisca; Guzman, Hector M.

2016-01-01

Abstract The species of the genus Muricea were mainly described from 1846 to 1870. After that very few contributions were published. Although the highest richness of Muricea species is in the eastern Pacific shallow waters, a comprehensive systematic study of the genus does not exist. Recently we started a taxonomic review of the genus in order to validate the status of four species previously included in the genus Eumuricea. Herein we present the second part of the Muricea revision dealing with the species-group characterised by shelf-like calyces instead of tubular-like calyces (the Muricea squarrosa-group). Original type material was morphologically analysed and illustrated using optical and scanning electron microscopy. Comparative character tables are provided for the genus. The taxonomic status of the species was analysed and established by designating lectotypes, alternatively by recognising a holotype by monotypy. We conclude that the genus Muricea comprises 20 valid species, including the previous four in the Muricea squarrosa-group. We propose 10 lectotypes, a new combination and three more species groups for the genus based on morphology: the Muricea fruticosa-group, Muricea plantaginea-group and Muricea austera-group. PMID:27199581

Experimental investigation of material nonlinearity using the Rayleigh surface waves excited and detected by angle beam wedge transducers.

PubMed

Zhang, Shuzeng; Li, Xiongbing; Jeong, Hyunjo; Hu, Hongwei

2018-05-12

Angle beam wedge transducers are widely used in nonlinear Rayleigh wave experiments as they can generate Rayleigh wave easily and produce high intensity nonlinear waves for detection. When such a transducer is used, the spurious harmonics (source nonlinearity) and wave diffraction may occur and will affect the measurement results, so it is essential to fully understand its acoustic nature. This paper experimentally investigates the nonlinear Rayleigh wave beam fields generated and received by angle beam wedge transducers, in which the theoretical predictions are based on the acoustic model developed previously for angle beam wedge transducers [S. Zhang, et al., Wave Motion, 67, 141-159, (2016)]. The source of the spurious harmonics is fully characterized by scrutinizing the nonlinear Rayleigh wave behavior in various materials with different driving voltages. Furthermore, it is shown that the attenuation coefficients for both fundamental and second harmonic Rayleigh waves can be extracted by comparing the measurements with the predictions when the experiments are conducted at many locations along the propagation path. A technique is developed to evaluate the material nonlinearity by making appropriate corrections for source nonlinearity, diffraction and attenuation. The nonlinear parameters of three aluminum alloy specimens - Al 2024, Al 6061 and Al 7075 - are measured, and the results indicate that the measurement results can be significantly improved using the proposed method. Copyright © 2018. Published by Elsevier B.V.

Spatial variations in the dust-to-gas ratio of Enceladus' plume

NASA Astrophysics Data System (ADS)

Hedman, M. M.; Dhingra, D.; Nicholson, P. D.; Hansen, C. J.; Portyankina, G.; Ye, S.; Dong, Y.

2018-05-01

On day 138 of 2010, the plume of dust and gas emerging from Enceladus' South Polar Terrain passed between the Sun and the Cassini spacecraft. This solar occultation enabled Cassini's Ultraviolet Imaging Spectrograph (UVIS) and the Visual and Infrared Mapping Spectrometer (VIMS) to obtain simultaneous measurements of the plume's gas and dust components along the same lines of sight. The UVIS measurements of the plume's gas content are described in Hansen et al. (2011, GRL 38:11202) , while this paper describes the VIMS data and the information they provide about the plume's particle content. Together, the VIMS and UVIS measurements reveal that the plume material above Baghdad and Damascus sulci has a dust-to-gas mass ratio that is roughly an order of magnitude higher than the material above Alexandria and Cairo sulci. Similar trends in the plume's dust-to-gas ratio are also found in data obtained when Cassini flew through the plume in 2009, during which time the Ion and Neutral Mass Spectrometer (INMS), Radio and Plasma Wave Science instrument (RPWS) and Cosmic Dust Analyzer (CDA) instruments made in-situ measurements of the plume's gas and dust densities (Dong et al. 2015 JGR 120:915-937). These and other previously-published systematic differences in the material erupting from different fissures likely reflect variations in subsurface conditions across Encealdus' South Polar Terrain.

Two dimensional self-assembly zinc porphyrins and zinc phthalocyanines heterojunctions with record high power conversion efficiencies.

PubMed

Yu, Junting; Jiang, Zhou; Hao, Yifan; Zhu, Qianhong; Zhao, Mingliang; Jiang, Xue; Zhao, Jijun

2018-05-15

Compared to inorganic solar cells, the power conversion efficiencies (PCEs) of organic solar cells are much lower, but they are compensated by many merits such as lower cost, less weight, and tunable structures, making them prospective for further applications. Porphyrin and phthalocyanine are the two most significant materials for organic solar cells due to their strong light-absorbing properties and semiconductor characteristics. However, there is little research on the 2D heterojunction solar cells based on these two materials, meanwhile the PCEs of them are still low. Here we have self-assembled several 2D Zinc-porphyrins (ZnPors) and performed first-principles simulation to demonstrate their good stability, suitable light harvesting, and high charge carrier mobility. By perfectly matching lattice constants and band levels between those 2D ZnPors and our previous proposed ZnPcs, eleven type-II organic heterojunctions are constructed to further improve their charge separation capability. Those advantages endow 2D ZnPors and ZnPcs appreciable PCEs for solar cell. Among them, the theoretical PCE of 2D ZnPors/ZnPcs heterojunctions achieves as high as 19.84%, which prevails all reported organic solar cells, and even approaches the PCEs of inorganic solar cells. These results indicate that our 2D ZnPors and 2D ZnPcs are good candidate materials for future organic solar cells. © 2018 IOP Publishing Ltd.

Maximal Ambient Noise Levels and Type of Voice Material Required for Valid Use of Smartphones in Clinical Voice Research.

PubMed

Lebacq, Jean; Schoentgen, Jean; Cantarella, Giovanna; Bruss, Franz Thomas; Manfredi, Claudia; DeJonckere, Philippe

2017-09-01

Smartphone technology provides new opportunities for recording standardized voice samples of patients and transmitting the audio files to the voice laboratory. This drastically improves the achievement of baseline designs, used in research on efficiency of voice treatments. However, the basic requirement is the suitability of smartphones for recording and digitizing pathologic voices (mainly characterized by period perturbations and noise) without significant distortion. In a previous article, this was tested using realistic synthesized deviant voice samples (/a:/) with three precisely known levels of jitter and of noise in all combinations. High correlations were found between jitter and noise to harmonics ratio measured in (1) recordings via smartphones, (2) direct microphone recordings, and (3) sound files generated by the synthesizer. In the present work, similar experiments were performed (1) in the presence of increasing levels of ambient noise and (2) using synthetic deviant voice samples (/a:/) as well as synthetic voice material simulating a deviant short voiced utterance (/aiuaiuaiu/). Ambient noise levels up to 50 dB A are acceptable. However, signal processing occurs in some smartphones, and this significantly affects estimates of jitter and noise to harmonics ratio when formant changes are introduced in analogy with running speech. The conclusion is that voice material must provisionally be limited to a sustained /a/. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

Rechargeable anticandidal denture material with sustained release in saliva.

PubMed

Malakhov, A; Wen, J; Zhang, B-X; Wang, H; Geng, H; Chen, X-D; Sun, Y; Yeh, C-K

2016-07-01

Candida-induced denture stomatitis is a common debilitating problem among denture wearers. Previously, we described the fabrication of a new denture material that released antifungal drugs when immersed in phosphate buffered saline. Here, we use more clinically relevant immersion conditions (human saliva; 37°C) and measure miconazole release and bioactivity. Disks were prepared by grafting PNVP [poly(N-vinyl-2-pyrrolidinone)] onto PMMA [poly(methylmethacrylate)] using plasma initiation (PMMA-g-PNVP) and then loaded with miconazole. Drug-loaded disks were immersed in 10-100% human saliva (1-30 days). Miconazole release was measured and then tested for bioactivity vs miconazole-sensitive and miconazole-resistant Candida isolates. HPLC was used to quantify miconazole levels in saliva. Miconazole-loaded disks released antifungal drug for up to 30 days. Higher drug release was found with higher concentrations of saliva, and, interestingly, miconazole solubility was increased with higher saliva concentrations. The released miconazole retained its anticandidal activity. After immersion, the residual miconazole could be quenched and the disks recharged. Freshly recharged disks displayed the same release kinetics and bioactivity as the original disks. Quenched disks could also be charged with chlorhexidine that displayed anticandidal activity. These results suggest that PMMA-g-PNVP is a promising new denture material for long-term management of denture stomatitis. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Influence of the Metal Volume Fraction on the maximum deflection and impact load of GLARE plates subjected to low velocity impact

NASA Astrophysics Data System (ADS)

Bikakis, GSE; Savaidis, A.; Zalimidis, P.; Tsitos, S.

2016-11-01

Fiber-metal laminates are hybrid composite materials, consisting of alternating metal layers bonded to fiber-reinforced prepreg layers. GLARE (GLAss REinforced) belongs to this new family of materials. GLARE is the most successful fiber-metal laminate up to now and is currently being used for the construction of primary aerospace structures, such as the fuselage of the Airbus A380 air plane. Impact properties are very important in aerospace structures, since impact damage is caused by various sources, such as maintenance damage from dropped tools, collision between service cars or cargo and the structure, bird strikes and hail. The principal objective of this article is to evaluate the influence of the Metal Volume Fraction (MVF) on the low velocity impact response of GLARE fiber-metal laminates. Previously published differential equations of motion are employed for this purpose. The low velocity impact behavior of various circular GLARE plates is predicted and characteristic values of impact variables, which represent the impact phenomenon, are evaluated versus the corresponding MVF of the examined GLARE material grades. The considered GLARE plates are subjected to low velocity impact under identical impact conditions. A strong effect of the MVF on the maximum impact load and a significant effect on the maximum plate deflection of GLARE plates has been found.

Influence of the Metal Volume Fraction on the permanent dent depth and energy absorption of GLARE plates subjected to low velocity impact

NASA Astrophysics Data System (ADS)

Bikakis, GSE; Savaidis, A.; Zalimidis, P.; Tsitos, S.

2016-11-01

Fiber-metal laminates are hybrid composite materials, consisting of alternating metal layers bonded to fiber-reinforced prepreg layers. GLARE (GLAss REinforced) belongs to this new family of materials. GLARE is the most successful fiber-metal laminate up to now and is currently being used for the construction of primary aerospace structures, such as the fuselage of the Airbus A380 air plane. Impact properties are very important in aerospace structures, since impact damage is caused by various sources, such as maintenance damage from dropped tools, collision between service cars or cargo and the structure, bird strikes and hail. The principal objective of this article is to evaluate the influence of the Metal Volume Fraction (MVF) on the low velocity impact response of GLARE fiber-metal laminates. Previously published differential equations of motion are employed for this purpose. The low velocity impact behavior of various circular GLARE plates is predicted and characteristic values of impact variables, which represent the impact phenomenon, are evaluated versus the corresponding MVF of the examined GLARE material grades. The considered GLARE plates are subjected to low velocity impact under identical impact conditions. A strong effect of the MVF on the maximum impact load and a significant effect on the maximum plate deflection of GLARE plates has been found.

Bibliography of information on mechanics of structural failure (hydrogen embrittlement, protective coatings, composite materials, NDE)

NASA Technical Reports Server (NTRS)

Carpenter, J. L., Jr.

1976-01-01

This bibliography is comprised of approximately 1,600 reference citations related to four problem areas in the mechanics of failure in aerospace structures. The bibliography represents a search of the literature published in the period 1962-1976, the effort being largely limited to documents published in the United States. Listings are subdivided into the four problem areas: Hydrogen Embrittlement; Protective Coatings; Composite Materials; and Nondestructive Evaluation. An author index is included.

META-ANALYSIS OF THE SCIENTIFIC CONTENTS OF MATERIA SOCIO-MEDICA JOURNAL IN THE PERIOD 2009–2015

PubMed Central

Masic, Izet; Begic, Edin; Zunic, Lejla; Donev, Doncho

2016-01-01

Introduction: Materia Socio Medica Journal has a long history. It was founded in 1978. Aim: To evaluate journal articles in 2015 and compare findings to previous years. Material and methods: The study has retrospective and descriptive character, and included the period 2009-2015. Results: A total of 99 articles were published in Materia Socio Medica during 2015 and it shows an upward trend during the period 2009-2015. Original articles are present in majority during the last seven years (69,2%). Analyzing the last seven years, 44,1% of articles were from the field of clinical medicine. Articles from the fields of public health show an upward trend during the last four years. Collaboration rate in 2015 was 0,95. Authors of the articles are from ten countries (four continents). H index of journal is 8 and g index is 12 (Publish or Perish software). According to GoogleScholar, h5 index for Materia Socio Medica is 8 and h5 median is 9. Conclusions: The objectives of the journal in the next year are: to become a part of the Scopus and Web of Science databases, further internationalization and promotion of the journal in the country and the region, revision and broadening of the Editorial Board, trying to follow trend in reducing the number of days required for a decision on acceptance or revision of article and involvement of the younger generation of professionals and scientists into the journal work and publishing scope, which will lead to emergence of new enthusiasm and ideas (Journal intends to follow the trends of modern biomedical publishing worldwide). PMID:27047258

77 FR 7609 - Policy Letter 11-01, Performance of Inherently Governmental and Critical Functions

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-13

... Regulation. The corrections below should be used in place of text previously published in the September 12, 2011 notice. All other information from the published Final Policy remains unchanged. The full text of...

Device SEE Susceptibility Update: 1996-1998

NASA Technical Reports Server (NTRS)

Coss, J. R.; Miyahira, T. F.; Swift, G. M.

1998-01-01

This eighth Compendium continues the previous work of Nichols, et al, on single event effects (SEE) first published in 1985. Because the compendium has grown so voluminous, this update only presents data not publised in previous compendia.

LMSC PUBLISHED CONTRIBUTIONS, 1966 IMPRINTS: A CITATION BIBLIOGRAPHY,

DTIC Science & Technology

PHYSICS, BIBLIOGRAPHIES), (*AERONAUTICS, BIBLIOGRAPHIES), (*ASTRONAUTICS, BIBLIOGRAPHIES), (* MATERIALS , BIBLIOGRAPHIES), (*ELECTRONICS...BIBLIOGRAPHIES), (*ENGINEERING, BIBLIOGRAPHIES), ASTROPHYSICS, NUCLEAR PHYSICS, MECHANICS, METALLURGY, CERAMIC MATERIALS , SOLID STATE PHYSICS, INFORMATION RETRIEVAL, PROPULSION SYSTEMS, BIONICS, REPORTS

Use of unbalanced laminates as a screening method for microcracking

NASA Technical Reports Server (NTRS)

Papadopoulos, Demetrios S.; Bowles, Kenneth J.

1990-01-01

State-of-the-art, high temperature polyimide matrix composites, reinforced with continuous graphite fibers are known to be susceptible to intraply cracking when thermally cycled over their useful service temperature range. It is believed that the transply cracking, in part, results from residual stresses caused by differences in coefficients of thermal expansion (CTE) between the polymer matrix and the reinforcement. Thermal cycling tests to investigate this phenomenon involve expensive time and energy consuming programs which are not economically feasible for use as a part of a materials screening process. As an alternative to thermal cycling studies, a study of unbalanced crossply graphite fiber reinforcement composites was conducted to assess the effect of the composite ply layup and surface condition on the residual stresses that remain after the processing of these materials. The residual stresses were assessed by measuring the radii of curvature of the types of laminates that were studied. The temperature at which stress-free conditions existed were determined and a dye penetrant method was used to observe surface damage resulting from excessive residual stress buildup. These results are compared with some published results of thermal cycling tests that were previously conducted on balanced polyimide composites.

Applications of compact accelerator-driven neutron sources: An updated assessment from the perspective of materials research in Italy

DOE PAGES

Andreani, C.; Anderson, I. S.; Carpenter, J. M.; ...

2014-12-24

In 2005 the International Atomic Energy Agency (IAEA) in Vienna published a report [1] on ‘Development Opportunities of Small and Medium Scale Accelerator Driven Neutron Sources’ which summarized the prospect of smaller sources in supporting the large spallation neutron sources for materials characterization and instrumentation, a theme advocated by Bauer, Clausen, Mank, and Mulhauser in previous publications [2-4]. In 2010 the Union for Compact Accelerator-driven Neutron Sources (UCANS) was established [5], galvanizing cross-disciplinary collaborations on new source and neutronics development and expanded applications based on both slow-neutron scattering and other neutron-matter interactions of neutron energies ranging from 10⁻⁶ to 10²more » MeV [6]. Here, we first cover the recent development of ongoing and prospective projects of compact accelerator-driven neutron sources (CANS) but concentrate on prospective accelerators currently proposed in Italy. Two active R&D topics, irradiation effects on electronics and cultural heritage studies, are chosen to illustrate the impact of state-of-the-art CANS on these programs with respect to the characteristics and complementarity of the accelerator and neutronics systems as well as instrumentation development.« less

Efficient synthesis of ammonia from N2 and H2 alone in a ferroelectric packed-bed DBD reactor

NASA Astrophysics Data System (ADS)

Gómez-Ramírez, A.; Cotrino, J.; Lambert, R. M.; González-Elipe, A. R.

2015-12-01

A detailed study of ammonia synthesis from hydrogen and nitrogen in a planar dielectric barrier discharge (DBD) reactor was carried out. Electrical parameters were systematically varied, including applied voltage and frequency, electrode gap, and type of ferroelectric material (BaTiO3 versus PZT). For selected operating conditions, power consumption and plasma electron density were estimated from Lissajous diagrams and by application of the Bolsig  +  model, respectively. Optical emission spectroscopy was used to follow the evolution of plasma species (\\text{N}{{\\text{H}}*},{{\\text{N}}*},~{N}2+~\\text{and} ~{N}2* ) as a function of applied voltage with both types of ferroelectric material. PZT gave both greater energy efficiency and higher ammonia yield than BaTiO3: 0.9 g NH3 kWh-1 and 2.7% single pass N2 conversion, respectively. This performance is substantially superior to previously published findings on DBD synthesis of NH3 from N2 and H2 alone. The influence of electrical working parameters, the beneficial effect of PZT and the importance of controlling reactant residence time are rationalized in a reaction model that takes account of the principal process variables

The analysis of a World War I U.S. service member's dental remains recovered in France.

PubMed

Shiroma, Calvin Y

2014-11-01

In October 2009, the grave of an unknown World War I (WWI) U.S. service member was exhumed in Rembercourt-Sur-Mad Village, in the Lorraine Region of France. The skeletal remains and material evidence were accessioned into the Joint POW/MIA Accounting Command's (JPAC) Central Identification Laboratory (CIL). The personnel records for the associated casualty were requested, received, and reviewed. A dental profile was present among the service member's personal information. There were multiple points of concordance between the dental records of the associated casualty, and the recovered dental remains to include eight restored teeth, 15 unrestored teeth, and three antemortem missing teeth. Distinctive restorations which compared favorably included a porcelain crown and multiple gold foil fillings. All lines of evidence (historical, material evidence/personal effects, anthropological, and dental) and the circumstances of loss compared positively with the associated casualty. On April 1, 2010, the previously unaccounted-for U.S. service member was positively identified and on June 23, 2010, was buried with full military honors at Arlington National Cemetery. Published 2014. This article is a U.S. Government work and is in the public domain in the U.S.A.

Engineering Lipid Bilayer Membranes for Protein Studies

PubMed Central

Khan, Muhammad Shuja; Dosoky, Noura Sayed; Williams, John Dalton

2013-01-01

Lipid membranes regulate the flow of nutrients and communication signaling between cells and protect the sub-cellular structures. Recent attempts to fabricate artificial systems using nanostructures that mimic the physiological properties of natural lipid bilayer membranes (LBM) fused with transmembrane proteins have helped demonstrate the importance of temperature, pH, ionic strength, adsorption behavior, conformational reorientation and surface density in cellular membranes which all affect the incorporation of proteins on solid surfaces. Much of this work is performed on artificial templates made of polymer sponges or porous materials based on alumina, mica, and porous silicon (PSi) surfaces. For example, porous silicon materials have high biocompatibility, biodegradability, and photoluminescence, which allow them to be used both as a support structure for lipid bilayers or a template to measure the electrochemical functionality of living cells grown over the surface as in vivo. The variety of these media, coupled with the complex physiological conditions present in living systems, warrant a summary and prospectus detailing which artificial systems provide the most promise for different biological conditions. This study summarizes the use of electrochemical impedance spectroscopy (EIS) data on artificial biological membranes that are closely matched with previously published biological systems using both black lipid membrane and patch clamp techniques. PMID:24185908

Finite difference time domain calculation of transients in antennas with nonlinear loads

NASA Technical Reports Server (NTRS)

Luebbers, Raymond J.; Beggs, John H.; Kunz, Karl S.; Chamberlin, Kent

1991-01-01

Determining transient electromagnetic fields in antennas with nonlinear loads is a challenging problem. Typical methods used involve calculating frequency domain parameters at a large number of different frequencies, then applying Fourier transform methods plus nonlinear equation solution techniques. If the antenna is simple enough so that the open circuit time domain voltage can be determined independently of the effects of the nonlinear load on the antennas current, time stepping methods can be applied in a straightforward way. Here, transient fields for antennas with more general geometries are calculated directly using Finite Difference Time Domain (FDTD) methods. In each FDTD cell which contains a nonlinear load, a nonlinear equation is solved at each time step. As a test case, the transient current in a long dipole antenna with a nonlinear load excited by a pulsed plane wave is computed using this approach. The results agree well with both calculated and measured results previously published. The approach given here extends the applicability of the FDTD method to problems involving scattering from targets, including nonlinear loads and materials, and to coupling between antennas containing nonlinear loads. It may also be extended to propagation through nonlinear materials.

On the die compaction of powders used in pharmaceutics.

PubMed

Aryanpour, Gholamreza; Farzaneh, Masoud

2018-07-01

Die compaction is widely used in the compaction of pharmaceutical powders (tableting). It is well known that the powder densification is a result of particle rearrangement and particle deformation. The former is considered to be the governing mechanism of densification in an initial stage of compaction and the latter is regarded as the governing mechanism in the compaction at the higher pressure range. As a more realistic assumption, one can consider that a simultaneous performance of both the rearrangement and deformation mechanisms takes place from the beginning of compaction. To mathematically formulate this assumption, a piston equation is presented where the material relative density is given as a function of the applied pressure on the powder. From the equation, it is possible to obtain the contribution of each mechanism to the material densification at each value of the applied pressure. In the continuation, the piston equation is applied to the tabletting of some pharmaceutical powders. These are the powders of Ascorbic Acid, Avicel ® PH 101, Avicel ® PH 301, Emcompress ® , Sodium Chloride, and Tablettose ® whose tableting results have been previously published in the literature. The results show the piston equation as a suitable approach to describe the tabletting of pharmaceutical powders.

Psychoactive constituents of cannabis and their clinical implications: a systematic review.

PubMed

Casajuana Köguel, Cristina; López-Pelayo, Hugo; Balcells-Olivero, Mª Mercedes; Colom, Joan; Gual, Antoni

2018-04-15

Objective This systematic review aims to summarize current evidence on which naturally present cannabinoids contribute to cannabis psychoactivity, considering their reported concentrations and pharmacodynamics in humans. Design Following PRISMA guidelines, papers published before March 2016 in Medline, Scopus-Elsevier, Scopus, ISI-Web of Knowledge and COCHRANE, and fulfilling established a-priori selection criteria have been included. Results In 40 original papers, three naturally present cannabinoids (∆-9-Tetrahydrocannabinol, ∆-8-Tetrahydrocannabinol and Cannabinol) and one human metabolite (11-OH-THC) had clinical relevance. Of these, the metabolite produces the greatest psychoactive effects. Cannabidiol (CBD) is not psychoactive but plays a modulating role on cannabis psychoactive effects. The proportion of 9-THC in plant material is higher (up to 40%) than in other cannabinoids (up to 9%). Pharmacodynamic reports vary due to differences in methodological aspects (doses, administration route and volunteers' previous experience with cannabis). Conclusions Findings reveal that 9-THC contributes the most to cannabis psychoactivity. Due to lower psychoactive potency and smaller proportions in plant material, other psychoactive cannabinoids have a weak influence on cannabis final effects. Current lack of standard methodology hinders homogenized research on cannabis health effects. Working on a standard cannabis unit considering 9-THC is recommended.

Improving agar electrospinnability with choline-based deep eutectic solvents.

PubMed

Sousa, Ana M M; Souza, Hiléia K S; Uknalis, Joseph; Liu, Shih-Chuan; Gonçalves, Maria P; Liu, LinShu

2015-09-01

Very recently our group has produced novel agar-based fibers by an electrospinning technique using water as solvent and polyvinyl alcohol (PVA) as co-blending polymer. Here, we tested the deep eutectic solvent (DES), (2-hydroxyethyl)trimethylammonium chloride/urea prepared at 1:2 molar ratio, as an alternative solvent medium for agar electrospinning. The electrospun materials were collected with an ethanol bath adapted to a previous electrospinning set-up. One weight percent agar-in-DES showed improved viscoelasticity and hence, spinnability, when compared to 1 wt% agar-in-water and pure agar nanofibers were successfully electrospun if working above the temperature of sol-gel transition (∼80 °C). By changing the solvent medium we decreased the PVA concentration (5 wt% starting solution) and successfully produced composite fibers with high agar contents (50/50 agar/PVA). Best composite fibers were formed with the 50/50 and 30/70 agar/PVA solutions. These fibers were mechanically resistant, showed tailorable surface roughness and diverse size distributions, with most of the diameters falling in the sub-micron range. Both nano and micro forms of agar fibers (used separately or combined) may have potential for the design of new and highly functional agar-based materials. Published by Elsevier B.V.

Development of methods for predicting large crack growth in elastic-plastic work-hardening materials in fully plastic conditions

NASA Technical Reports Server (NTRS)

Ford, Hugh; Turner, C. E.; Fenner, R. T.; Curr, R. M.; Ivankovic, A.

1995-01-01

The objects of the first, exploratory, stage of the project were listed as: (1) to make a detailed and critical review of the Boundary Element method as already published and with regard to elastic-plastic fracture mechanics, to assess its potential for handling present concepts in two-dimensional and three-dimensional cases. To this was subsequently added the Finite Volume method and certain aspects of the Finite Element method for comparative purposes; (2) to assess the further steps needed to apply the methods so far developed to the general field, covering a practical range of geometries, work hardening materials, and composites: to consider their application under higher temperature conditions; (3) to re-assess the present stage of development of the energy dissipation rate, crack tip opening angle and J-integral models in relation to the possibilities of producing a unified technology with the previous two items; and (4) to report on the feasibility and promise of this combined approach and, if appropriate, make recommendations for the second stage aimed at developing a generalized crack growth technology for its application to real-life problems.

An automated protocol for performance benchmarking a widefield fluorescence microscope.

PubMed

Halter, Michael; Bier, Elianna; DeRose, Paul C; Cooksey, Gregory A; Choquette, Steven J; Plant, Anne L; Elliott, John T

2014-11-01

Widefield fluorescence microscopy is a highly used tool for visually assessing biological samples and for quantifying cell responses. Despite its widespread use in high content analysis and other imaging applications, few published methods exist for evaluating and benchmarking the analytical performance of a microscope. Easy-to-use benchmarking methods would facilitate the use of fluorescence imaging as a quantitative analytical tool in research applications, and would aid the determination of instrumental method validation for commercial product development applications. We describe and evaluate an automated method to characterize a fluorescence imaging system's performance by benchmarking the detection threshold, saturation, and linear dynamic range to a reference material. The benchmarking procedure is demonstrated using two different materials as the reference material, uranyl-ion-doped glass and Schott 475 GG filter glass. Both are suitable candidate reference materials that are homogeneously fluorescent and highly photostable, and the Schott 475 GG filter glass is currently commercially available. In addition to benchmarking the analytical performance, we also demonstrate that the reference materials provide for accurate day to day intensity calibration. Published 2014 Wiley Periodicals Inc. Published 2014 Wiley Periodicals Inc. This article is a US government work and, as such, is in the public domain in the United States of America.

Catalogs of Audiovisual Materials: A Guide to Government Sources.

ERIC Educational Resources Information Center

Dale, Doris Cruger

This annotated bibliography lists 53 federally published catalogs and bibliographies which identify films and other audiovisual materials produced or sponsored by government agencies; some also include commercially produced audiovisual and/or print materials. Publications are listed alphabetically by government agency or department, and…

Material Writer's Guide.

ERIC Educational Resources Information Center

Byrd, Patricia, Ed.

This guide is a collection of essays on the writing of English-as-a-Second-Language (ESL) textbooks and other instructional materials. Articles include: "Writing and Publishing Textbooks (Patricia Byrd); "The Craft of Materials Writing" (Fraida Dubin); "Considering Culture: Guidelines for ESL/EFL Textbook Writers" (Gayle Nelson); "Issues in the…

75 FR 17825 - Request for Public Comments and OMB Approval of Existing Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-07

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No...: Pipeline and Hazardous Materials Safety Administration. ACTION: Request for Public Comments and OMB... Reduction Act of 1995, the Pipeline and Hazardous Materials Safety Administration (PHMSA) published a notice...

Business Education Index 1987. Volume 48. Index of Business Education Articles, Research Studies, and Textbooks Compiled from a Selected List of Periodicals, Publishers, and Yearbooks Published during the Year 1987.

ERIC Educational Resources Information Center

McCauley, Rosemarie, Ed.

1988-01-01

This index lists business education articles, research studies, and textbooks that were compiled from a selected list of periodicals, publishers, and yearbooks published during 1987. A total of 19 general publications and 48 periodicals were indexed. The materials are indexed under 94 subject headings, including the following: accounting,…

Electro-Thermo-Mechanical Homogenization of Ferroelectric Atomistic Medium

DTIC Science & Technology

2011-03-23

design new electroactive materials and devices. (a) Papers published in peer-reviewed journals (N/A for none) List of papers submitted or published...that acknowledge ARO support during this reporting period. List the papers, including journal references, in the following categories: (b) Papers...published in non-peer-reviewed journals or in conference proceedings (N/A for none) 0.00Number of Papers published in peer-reviewed journals : Number of

Review—Multifunctional Materials for Enhanced Li-Ion Batteries Durability: A Brief Review of Practical Options

DOE Office of Scientific and Technical Information (OSTI.GOV)

Banerjee, Anjan; Shilina, Yuliya; Ziv, Baruch

Transition metal (TM) ions dissolution from positive electrodes, migration to and deposition on negative electrodes, followed by Mn-catalyzed reactions of solvents and anions, with loss of Li+ ions, is a major degradation (DMDCR) mechanism in Li-ion batteries (LIBs) with spinel positive electrode materials. While the details of the DMDCR mechanism are still under debate, it is clear that HF and other acid species’ attack is the main cause in solutions with LiPF6 electrolyte. We first review the work on various mitigation measures for the DMDCR mechanism, now spanning more than two decades. We then discuss recent progress on our understandingmore » of Mn species in electrolyte solutions and the extension of a mitigation measure first proposed by Tarascon and coworkers in 1999, namely chelation of TM cations, to Mn cation trapping, HF scavenging, and alkali metal ions dispensing multi-functional materials. We focus on practicable, drop-in technical solutions, based on placing such materials in the inter-electrode space, with significant benefits for LIBs performance: increased capacity retention during operation at room and above-ambient temperatures as well as robust (both maximally ionically conducting and electronically insulating) solid-electrolyte interfaces, having reduced charge transfer and film resistances at both negative and positive electrodes. We illustrate the multifunctional materials approach with both new and previously published data. We also discuss and offer our evaluation regarding the merits and drawbacks of the various mitigation measures, with an eye for practically relevant technical solutions capable to meet both the performance requirements and cost constraints for commercial LIBs, and end with recommendations for future work.« less

Uav and GIS Based Tool for Collection and Propagation of Seeds Material - First Results

NASA Astrophysics Data System (ADS)

Stereńczak, K.; Mroczek, P.; Jastrzębowski, S.; Krok, G.; Lisańczuk, M.; Klisz, M.; Kantorowicz, W.

2016-06-01

Seed management carried out by The State Forests National Forest Holding is an integral part of rational forest management. Seed collection takes place mainly from stands belonging to first category of forest reproductive material, which is the largest seed base in Poland. In smaller amount, seeds are collected in selective objects of highest forest reproductive material category (selected seed stands, seed orchards). The previous estimation methods of seed crop were based on visual assessment of cones in the stands for their harvest. Following the rules of FRM transfer is additional difficulty of rational seed management which limits the possibility of the use of planting material in Poland. Statements concerning forecast of seed crop and monitoring of seed quality is based on annual reports from the State Forest Service. Forest Research Institute is responsible for preparing and publishing above-mentioned statements. A small extent of its automatization and optimization is a large disadvantage of this procedure. In order to make this process more effective web-based GIS application was designed. Its main performance will give a possibility to upload present-day information on seed efficiency, their spatial pattern and availability. Currently this system is under preparation. As a result, the project team will get a possibility to increase participation of seed material collected from selected seed base and to share good practices on this issue in more efficient way. In the future this will make it possible to obtain greater genetic gain of selection strategy. Additionally, first results presented in literature showed possible use of unmanned aerial system/vehicle (UAS/V) for supporting of seed crop forecast procedure.

Models of an In-Situ Propellant Production Plant for Mars Exploration

NASA Technical Reports Server (NTRS)

Goodrich, Charlie; Kurien, James; Millar, Bill; Sweet, Adam; Waterman, Sue; Clancy, Daniel (Technical Monitor)

2001-01-01

An in-situ propellant production system (ISPP) is designed to make rocket fuel from chemicals in the Martian atmosphere in order to reduce the amount of materials that would need to be brought from Earth to support Mars missions. We have developed a description of a hypothetical ISPP system that we would like to make available to researchers who are interested in the problem of automatically diagnosing failures in complex NASA systems. This problem description will help researchers to investigate problems of interest to NASA. We would like to make the following material publicly available: (1) a 'common sense' model of an ISPP system; (2) low- and medium-fidelity simulations of the ISPP system written in Microsoft Excel and HCC; and (3) previously published data and diagrams concerning ISPP components. We do not believe there are any export considerations on these materials for the following reasons: (1) These models are not useful for guidance and real time control of vehicles, encrpytion, or any other software purpose categorized under the Export Control Classification Numbers; and (2) The models are very high level and would not by themselves enable real-time control of a real hardware system. The models are at the level of common sense. They capture, for example, that if a heater is turned on an increase in temperature should result(see the attached excerpt). We do not believe there is any commercial value to this material, given the low commercial demand for propellant plants on mars. We have spoken to acting Code IC Division Chief Dan Clancy, and he concurs with our desire to make these materials publicly available via a technical report.

The Aristarchus-Harbinger region of the moon: Surface geology and history from recent remote-sensing observations

USGS Publications Warehouse

Zisk, S.H.; Hodges, C.A.; Moore, H.J.; Shorthill, R.W.; Thompson, T.W.; Whitaker, E.A.; Wilhelms, D.E.

1977-01-01

The region including the Aristarchus Plateau and Montes Harbinger is probably the most diverse, geologically, of any area of comparble size on the Moon. This part of the northwest quadrant of the lunar near side includes unique dark mantling material; both the densest concentration and the largest of the sinuous rilles; apparent volcanic vents, sinks, and domes; mare materials of various ages and colors; one of the freshest large craters (Aristarchus) with ejecta having unique colors and albedos; and three other large craters in different states of flooding and degradation (krieger, Herodotus, and Prinz). The three best-authenticated lunar transient phenomena were also observed here. This study is based principally on photographic and remote sensing observations made from Earth and Apollo orbiting space craft. Results include (1) delineation of geologic map units and their stratigraphic relationships; (2) discussion of the complex interrelationships between materials of volcanic and impact origin, including the effects of excavation, redistribution and mixing of previously deposited materials by younger impact craters; (3) deduction of physical and chemical properties of certain of the geologic units, based on both the remote-sensing information and on extrapolation of Apollo data to this area; and (4) development of a detailed geologic history of the region, outlining the probable sequence of events that resulted in its present appearance. A primary concern of the investigation has been anomalous red dark mantle on the Plateau. Based on an integration of Earth- and lunar orbit-based data, this layer seems to consist of fine-grained, block-free material containing a relatively large fraction of orange glass. It is probably of pyroclastic origin, laid down at some time during the Imbrian period of mare flooding. ?? 1977 D. Reidel Publishing Company.

Comparison of homeopathic globules prepared from high and ultra-high dilutions of various starting materials by ultraviolet light spectroscopy.

PubMed

Klein, Sabine D; Wolf, Ursula

2016-02-01

Homeopathic globules are commonly used in clinical practice, while research focuses on liquid potencies. Sequential dilution and succussion in their production process has been proposed to change the physico-chemical properties of the solvent(s). It has been reported that aqueous potencies of various starting materials showed significant differences in ultraviolet light transmission compared to controls and between different dilution levels. The aim of the present study was to repeat and expand these experiments to homeopathic globules. Globules were specially produced for this study by Spagyros AG (Gümligen, Switzerland) from 6 starting materials (Aconitum napellus, Atropa belladonna, phosphorus, sulfur, Apis mellifica, quartz) and for 6 dilution levels (6x, 12x, 30c, 200c, 200CF (centesimal discontinuous fluxion), 10,000CF). Native globules and globules impregnated with solvents were used as controls. Globules were dissolved in ultrapure water, and absorbance in the ultraviolet range was measured. The average absorbance from 200 to 340nm was calculated and corrected for differences between measurement days and instrumental drift. Statistically significant differences were found for A. napellus, sulfur, and A. mellifica when normalized average absorbance of the various dilution levels from the same starting material (including control and solvent control globules) was compared. Additionally, absorbance within dilution levels was compared among the various starting materials. Statistically significant differences were found among 30c, 200c and 200CF dilutions. This study has expanded previous findings from aqueous potencies to globules and may indicate that characteristics of aqueous high dilutions may be preserved and detectable in dissolved globules. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Mesozoic Crustal Thickening of the Longmenshan Belt (NE Tibet, China) by Imbrication of Basement Slices: Insights From Structural Analysis, Petrofabric and Magnetic Fabric Studies, and Gravity Modeling

NASA Astrophysics Data System (ADS)

Xue, Zhenhua; Martelet, Guillaume; Lin, Wei; Faure, Michel; Chen, Yan; Wei, Wei; Li, Shuangjian; Wang, Qingchen

2017-12-01

This work first presents field structural analysis, anisotropy of magnetic susceptibility (AMS) measurements, and kinematic and microstructural studies on the Neoproterozoic Pengguan complex located in the middle segment of the Longmenshan thrust belt (LMTB), NE Tibet. These investigations indicate that the Pengguan complex is a heterogeneous unit with a ductilely deformed NW domain and an undeformed SE domain, rather than a single homogeneous body as previously thought. The NW part of the Pengguan complex is constrained by top-to-the-NW shearing along its NW boundary and top-to-the-SE shearing along its SE boundary, where it imbricates and overrides the SE domain. Two orogen-perpendicular gravity models not only support the imbricated shape of the Pengguan complex but also reveal an imbrication of high-density material hidden below the Paleozoic rocks on the west of the LMTB. Regionally, this suggests a basement-slice-imbricated structure that developed along the margin of the Yangtze Block, as shown by the regional gravity anomaly map, together with the published nearby seismic profile and the distribution of orogen-parallel Neoproterozoic complexes. Integrating the previously published ages of the NW normal faulting and of the SE directed thrusting, the locally fast exhumation rate, and the lithological characteristics of the sediments in the LMTB front, we interpret the basement-slice-imbricated structure as the result of southeastward thrusting of the basement slices during the Late Jurassic-Early Cretaceous. This architecture makes a significant contribution to the crustal thickening of the LMTB during the Mesozoic, and therefore, the Cenozoic thickening of the Longmenshan belt might be less important than often suggested.

Successful enrichment and recovery of whole mitochondrial genomes from ancient human dental calculus

PubMed Central

Ozga, Andrew T.; Nieves‐Colón, Maria A.; Honap, Tanvi P.; Sankaranarayanan, Krithivasan; Hofman, Courtney A.; Milner, George R.; Lewis, Cecil M.; Stone, Anne C.

2016-01-01

ABSTRACT Objectives Archaeological dental calculus is a rich source of host‐associated biomolecules. Importantly, however, dental calculus is more accurately described as a calcified microbial biofilm than a host tissue. As such, concerns regarding destructive analysis of human remains may not apply as strongly to dental calculus, opening the possibility of obtaining human health and ancestry information from dental calculus in cases where destructive analysis of conventional skeletal remains is not permitted. Here we investigate the preservation of human mitochondrial DNA (mtDNA) in archaeological dental calculus and its potential for full mitochondrial genome (mitogenome) reconstruction in maternal lineage ancestry analysis. Materials and Methods Extracted DNA from six individuals at the 700‐year‐old Norris Farms #36 cemetery in Illinois was enriched for mtDNA using in‐solution capture techniques, followed by Illumina high‐throughput sequencing. Results Full mitogenomes (7–34×) were successfully reconstructed from dental calculus for all six individuals, including three individuals who had previously tested negative for DNA preservation in bone using conventional PCR techniques. Mitochondrial haplogroup assignments were consistent with previously published findings, and additional comparative analysis of paired dental calculus and dentine from two individuals yielded equivalent haplotype results. All dental calculus samples exhibited damage patterns consistent with ancient DNA, and mitochondrial sequences were estimated to be 92–100% endogenous. DNA polymerase choice was found to impact error rates in downstream sequence analysis, but these effects can be mitigated by greater sequencing depth. Discussion Dental calculus is a viable alternative source of human DNA that can be used to reconstruct full mitogenomes from archaeological remains. Am J Phys Anthropol 160:220–228, 2016. © 2016 The Authors American Journal of Physical Anthropology Published by Wiley Periodicals, Inc. PMID:26989998

Blood concentrations of new designer benzodiazepines in forensic cases.

PubMed

Høiseth, Gudrun; Tuv, Silja Skogstad; Karinen, Ritva

2016-11-01

A number of new designer benzodiazepines have reached the illegal drug market over the past years. Toxicological interpretation of concentrations of these drugs in blood is quite challenging as very limited human data have previously been published. The aim of this study was to report blood concentrations of new designer benzodiazepines in a population of drugged drivers as well as some other criminal offenders, and to relate this to clinical impairment. The present material represents cases involving new designer benzodiazepines (clonazolam, diclazepam, flubromazepam, flubromazolam and pyrazolam) and etizolam, submitted for analyses during the period July 1, 2013-May 31, 2016. Analyses were performed using an ultra-performance liquid chromatography-tandem mass spectrometry method. Blood concentrations and results from the clinical test of impairment are reported. New designer benzodiazepines were detected in 77 cases during the study period. The median (range) concentrations were 0.012mg/L (0.00048-0.10) for flubromazolam (n=25), 0.055mg/L (0.0047-1.2) for flubromazepam (n=24), 0.013mg/L (0.0021-0.057) for diclazepam (n=15), 0.050mg/L (0.019-0.17) for etizolam (n=14), 0.0053mg/L (0.0019-0.011) for clonazolam (n=7) and 0.074mg/L for pyrazolam (n=1). In six cases, designer benzodiazepines were the only drugs detected in blood, and in two of those cases, the physician had given the conclusion of "considerably impaired" upon performing the clinical test for impairment. Given the lack of previously published data on human concentrations, results presented in this study could be helpful in interpretation of blood concentrations of new designer benzodiazepines. This is crucial for the assessment of the importance of toxicological results in suspected drugged drivers, rape victims, etc. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Re-description of the Arctic tardigrade Tenuibiotus voronkovi (Tumanov, 2007 (Eutardigrada; Macrobiotidea), with the first molecular data for the genus.

PubMed

Zawierucha, Krzysztof; Kolicka, Małgorzata; Kaczmarek, Łukasz

2016-11-24

Tardigrada is phylum of micrometazoans widely distributed throughout the world, because of old descriptions and insufficient morphometric data, many species currently need revision and re-description. Tenuibiotus voronkovi (Tumanov, 2007) is tardigrade previously only recorded from the Svalbard archipelago. This species' original description was based on two individuals with destroyed claws on the fourth pair of legs and a lack of complete morphometric data for buccal tube and claws. In this paper, we present a re-description of T. voronkovi, supplementing the original description using the original paratype and additional material from Svalbard: Spitsbergen, Nordaustlandet and Edgeøya. This species is characterised by two macroplacoids and a microplacoid, claws of Tenuibiotus type, dentate lunules under claw IV, and faint granulation on legs I-III and strong granulation on the legs IV. We include a new morphological description with microphotographs, morphometric, and molecular data (including: mitochondrial cytochrome c oxidase subunit I (COI), internal transcribed spacers (ITS1-5.8S rDNA-ITS2), and nuclear ribosome subunits 28S rRNA and 18S rRNA). These are the first published molecular data for the genus Tenuibiotus Pilato and Lisi, 2011, analysis of which indicated an affiliation of Tenuibiotus to the family Macrobiotidae. We found no differences in body size between individuals from different islands (Nordaustlandet and Edgeøya), but did observe variability in the eggs. After revision of the literature and the published figures, we concluded that Dastych's (1985) report of T. willardi (Pilato, 1976) from Svalbard, was actually T. voronkovi, which has the greater distribution in Svalbard, and other Arctic locations, than previously believed.

Lithographic performance and dissolution behavior of novolac resins for various developer surfactant systems

NASA Astrophysics Data System (ADS)

Flores, Gary E.; Loftus, James E.

1992-06-01

The use of surfactants in today's society ranges over a wide variety of technologies, from soaps and detergents to house paints and electronic materials. In the semiconductor industry, surfactants are commonly used as coating additives in photoresists, as additives in wet chemical etchants, as additives in developer solutions, and in other areas where surface activity is desirable. In most applications, the mechanisms of surfactant chemistry are well established, yet there has been only a limited amount of published literature pertaining to characterizing the behavior of surfactants in developer systems for photoresists. This project explores the application of surfactants in an aqueous tetramethyl ammonium hydroxide (TMAH) based developer for two optical resists, one incorporating a 2,1,4- diazonaphthoquinone (DNQ) sensitizer, while the other incorporates a 2,1,5-DNQ sensitizer. In addition, each optical resist is based on different positive novolac resins with distinct structural properties. This feature aids in illustrating the improtance of matching the developer surfactant with the photoresist resin structure. Four distinct non-ionic surfactants with well published physical and chemical properties are examined. Properties of the surfactants explored include differences in structure, surfactant concentration, various degrees of hydrophilic versus lipophilic content (known as the HLB, or hydrophilic - lipophilic balance), and the differences in reported critical micelle concentration (CMC). Previous research investigated the performance characteristics of the 2,1,5-DNQ for these four surfactants. This investigation is an extension of the previous project by next considering a significantly different photoresist. A discussion of potential mechanisms of the solubilization and wetting effects is utilized to promote an understanding of surfactant effects in resist/developer systems. Also, because of the extensive characterization involved in screening surfactants, a recommended selection and screening scheme is proposed.

49 CFR 7.7 - Access to materials and indices.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Access to materials and indices. 7.7 Section 7.7... To Be Made Public by DOT § 7.7 Access to materials and indices. (a) Except as provided in paragraph... unnecessary and impracticable to publish the index of materials in the Federal Register. Information as to the...

Catalog of Instructional Materials in English and Dictionaries, 1983-1985.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento.

Listed in this catalog of instructional materials in English and the use of dictionaries are those materials adopted by the California State Board of Education for use in public schools from 1983 to 1985. Materials listed include those published by (1) Allyn and Bacon; (2) Bowmar/Noble; (3) Ginn and Company; (4) Glencoe; (5) Harcourt, Brace…

Materials from the National Arts and the Handicapped Information Service: Annotated Bibliography. Second Draft.

ERIC Educational Resources Information Center

National Arts and the Handicapped Information Service, New York, NY.

This annotated bibliography describes media and materials on the subject of arts and handicapped persons, including books, recordings, films, and materials transcribed in braille and large print. Only materials produced since 1970 are listed; the many articles, magazines, and dissertations that were published in this period are not included.…

A Survey of Text Materials Used in Aviation Maintenance Technician Schools. Final Report.

ERIC Educational Resources Information Center

Allen, David; Bowers, William K.

The report documents the results of a national survey of book publishing firms and aviation maintenance technician schools to (1) identify the text materials used in the training of aviation mechanics; (2) appraise the suitability and availability of identified text materials; and (3) determine the adequacy of the text materials in meeting the…

Selected applications for current polymers in prosthetic dentistry - state of the art.

PubMed

Kawala, Maciej; Smardz, Joanna; Adamczyk, Lukasz; Grychowska, Natalia; Wieckiewicz, Mieszko

2018-05-10

Polymers are widely applied in medicine, including dentistry, i.e. in prosthodontics. The following paper is aimed at demonstrating the applications of selected modern polymers in prosthetic dentistry based on the reported literature. The study was conducted using the PubMed, SCOPUS and CINAHL databases in relation to documents published during 1999-2017. The following keywords were used: polymers with: prosthetic dentistry, impression materials, denture base materials, bite registration materials, denture soft liners, occlusal splint materials and 3D printing. Original papers and reviews which were significant from the modern clinical viewpoint and practical validity in relation to the possibility of using polymeric materials in prosthetic dentistry, were presented. Denture base materials were most commonly modified polymers. Modifications mainly concerned antimicrobial properties and reinforcement of the material structure by introducing additional fibers. Antimicrobial modifications were also common in case of relining materials. Polymeric materials have widely been used in prosthetic dentistry. Modifications of their composition allow achieving new, beneficial properties that affect quality of patients' life. Progress in science allows for a more methodologically-advanced research on the synthesis of new polymeric materials and incorporation of new substances into already known polymeric materials, that will require systematization and appropriate classification. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Geologic map of the MTM 85080 Quadrangle, Chasma Boreale Region of Mars

USGS Publications Warehouse

Herkenhoff, K. E.

2003-01-01

The polar deposits on Mars probably record martian climate history over the last 107 to 109 years (for example, Thomas and others, 1992). The area shown on this map includes polar layered deposits and polar ice, as well as some outcrops of older, underlying terrain. This quadrangle was mapped using Viking Orbiter images in order to study the relations among erosional and depositional processes on the north polar layered deposits and to compare them with the results of previous 1:500,000-scale mapping of the south polar layered deposits. Published geologic maps of the north polar region of Mars are based on images acquired by Mariner 9 and the Viking Orbiters. The extent of the layered deposits and other units varies among previous maps, in particular within Chasma Boreale. The present map agrees most closely with the map by Dial and Dohm (1994): the mantle material is exposed farther north than mapped by Tanaka and Scott (1987). The polar ice cap, areas of partial frost cover, the layered deposits, and two nonvolatile surface units-dust mantle and dark material-were mapped in the south polar region by Herkenhoff and Murray (1990a) at 1:2,000,000 scale using a color mosaic of Viking Orbiter images. Viking Orbiter rev 726, 768, and 771 color mosaics (taken during the northern summer of 1978) were constructed and used to identify similar color/albedo units in the north polar region, including the dark, saltating material that appears to have sources within the layered deposits. However, no dark material has been recognized in this map area. No significant difference in color exists between the layered deposits and the mantle material mapped by Dial and Dohm (1994), indicating that they are either composed of the same materials or are both covered by eolian debris. Therefore, in this map area the color mosaics are most useful for identifying areas of partial frost cover. Because the resolution of the color mosaics is not sufficient to map the color/albedo units in detail at 1:500,000-scale, contacts between them were recognized and mapped using higher resolution black-and-white Viking Orbiter images. The Viking Orbiter 2 images used to construct the map base were taken during the northern summer of 1976 (mostly Ls=133?-135?), with resolutions typically around 60 m/pixel. As noted on the published base, errors of up to 5 km exist in the placement of images in the base map; such errors are evident upon comparison of sheet 1 (summer) and sheet 2 (spring). Therefore, a new photomosaic base was created during map production and the linework was edited to match the new base. No craters have been found in the north polar layered deposits or polar ice cap. The observed lack of craters larger than 300 m implies that the surfaces of these units are no more than 100,000 years old or that they have been resurfaced at a rate of at least 2.3 mm/yr. The recent cratering flux on Mars is poorly constrained, so inferred resurfacing rates and ages of surface units are uncertain by at least a factor of 2.

18 CFR 154.302 - Previously submitted material.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Previously submitted material. 154.302 Section 154.302 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... concurrently with the rate change filing. There must be furnished to the Director, Office of Energy Market...

Orbital Plotting of WDS 04545-0314 and WDS 04478+5318

NASA Astrophysics Data System (ADS)

Smith, Nick; Foster, Chris; Myers, Blake; Sepulveda, Barbel; Genet, Russell

2016-01-01

Students at Lincoln High School used the PlateSolve 3 program to obtain the position angle and separation of two double stars, WDS 04545-0314 and WDS 04478+5318. Both stars were observed at Kitt Peak on October 20, 2013. A java-based program developed by the team was used to plot the new data on the previously published orbital paths. It was determined that WDS 04545-0314 is maintaining the previously published orbital solution but that the orbit of WDS 04478+5318 may need to be revised.

Bibliography of information on mechanics of structural failure

NASA Technical Reports Server (NTRS)

Carpenter, J. L., Jr.; Moya, N.; Shaffer, R. A.; Smith, D. M.

1973-01-01

A bibliography of approximately 1500 reference citations related to six problem areas in the mechanics of failure in aerospace structures is presented. The bibliography represents a search of the literature published in the ten year period 1962-1972 and is largely limited to documents published in the United States. Listings are subdivided into the six problem areas: (1) life prediction of structural materials; (2) fracture toughness data; (3) fracture mechanics analysis; (4) hydrogen embrittlement; (5) protective coatings; and (6) composite materials. An author index is included.

Distribution of medical research articles on the World Wide Web.

PubMed

Kavanagh, Kevin T

2003-01-01

Ninety-eight percent of 51 polled medical editors felt that published research articles should be available to the public on the World Wide Web at no charge, after a mean time from publication of 1.4 years for viewing and 1.9 years for printing. Public libraries or other government institutions could be allowed to assume the responsibility of housing and distributing the electronically stored archived material, analogous to their role with printed material, lifting the financial burden from the publishing companies.

Book Trade Research and Statistics. Prices of U.S. and Foreign Published Materials; Book Title Output and Average Prices: 2000 Final and 2001 Preliminary Figures; Book Sales Statistics, 2001: AAP Preliminary Estimates; U.S. Book Exports and Imports: 2001; Number of Book Outlets in the United States and Canada; Review Media Statistics.

ERIC Educational Resources Information Center

Sullivan, Sharon G.; Barr, Catherine; Grabois, Andrew

2002-01-01

Includes six articles that report on prices of U.S. and foreign published materials; book title output and average prices; book sales statistics; book exports and imports; book outlets in the U.S. and Canada; and review media statistics. (LRW)

29 CFR 2702.4 - Materials available.

Code of Federal Regulations, 2011 CFR

2011-07-01

... IMPLEMENTING THE FREEDOM OF INFORMATION ACT § 2702.4 Materials available. (a) FOIA Reading Room. Materials which may be made publicly available for inspection and copying at the Commission's on-site FOIA Reading... not published in the Federal Register; (3) Administrative staff manuals and instructions to staff that...

29 CFR 2702.4 - Materials available.

Code of Federal Regulations, 2010 CFR

2010-07-01

... IMPLEMENTING THE FREEDOM OF INFORMATION ACT § 2702.4 Materials available. (a) FOIA Reading Room. Materials which may be made publicly available for inspection and copying at the Commission's on-site FOIA Reading... not published in the Federal Register; (3) Administrative staff manuals and instructions to staff that...

Fire Safety Educational Material.

ERIC Educational Resources Information Center

Cohn, Bert M.

The state of the art of home fire safety educational material was reviewed to prepare a bibliography of home fire safety educational materials available from major public and private sources. Sources contacted were: National Fire Protection Association, National Safety Council, U.S. government agencies, private publishers and film distributors,…

Selected Bibliography of Egyptian Educational Materials, Vol. 1, No. 1, 1975.

ERIC Educational Resources Information Center

Al-Ahram Center for Scientific Translations, Cairo (Egypt).

There are 101 selected entries in this annotated bibliography of Egyptian materials on education published in 1975. Materials include journal articles, books, and government documents. The bibliography covers the following topics: laws and legislation, meetings and symposia, primary schools, preparatory schools, secondary schools, experimental…

Teacher's Directory of Reading Skill Aids and Materials.

ERIC Educational Resources Information Center

Dechant, Emerald

Intended to help reading teachers match pupil needs and deficiencies with specific instructional materials, this volume contains more than 2,000 print and audiovisual instructional materials for reading instruction. Citations, which include objectives, grade level, publisher, and format, are grouped into the following sections: (1) developing the…

Selected Bibliography of Egyptian Educational Materials, Vol. 1, No. 2, 1975.

ERIC Educational Resources Information Center

Al-Ahram Center for Scientific Translations, Cairo (Egypt).

There are 108 selected entries in this annotated bibliography of Egyptian materials on education published in 1975. Materials include journal articles, books, and government documents. The bibliography covers the following topics: adolescence, art education, child upbringing, comprehensive schools, curricula, educational change, educational aids,…

Proyecto Leer Bulletin, Number 9.

ERIC Educational Resources Information Center

Benson, Susan Shattuck

This bulletin lists addresses of publishers and distributors of audiovisual instructional materials in Spanish in the United States and Latin America. Sources are listed in four categories: (1) federal sources of materials, information on materials, names of resource people, programs, and proposal guidelines concerning the Spanish speaking; (2)…

Selected Bibliography of Egyptian Educational Materials, Vol. 1, No. 3, 1975.

ERIC Educational Resources Information Center

Al-Ahram Center for Scientific Translations, Cairo (Egypt).

There are 101 selected entries in this annotated bibliography of Egyptian materials on education published in 1975. Materials include journal articles, books, and government documents. The bibliography covers the following topics: academic certificates and dissertations, art education, audiovisual aids, camps, civics curricula, conferences and…

Selected Bibliography of Egyptian Educational Materials, Vol. 3, No. 2, 1977.

ERIC Educational Resources Information Center

Al-Ahram Center for Scientific Translations, Cairo (Egypt).

The annotated bibliography identifies 134 selected educational materials from Egypt published during 1977. The materials are drawn from Egyptian newspapers, journals, government publications, and university research reports. The entries are organized into 54 categories, including Art Education, Arabic Language, Commercial Schools, Curricula,…

Bibliography on La Mujer Chicana.

ERIC Educational Resources Information Center

Gutierrez, Lewis A.

Compiled from materials obtained by the Chicana Library Project, this bibliography cites 186 books, texts, articles, clippings, and special editions on the Chicana. Published between 1959 and 1974, the materials are available through the Human Resources Center. The materials are listed under the following subject headings: art, bibliographies,…

Disabling occupational injury in the US construction industry, 1996.

PubMed

Courtney, Theodore K; Matz, Simon; Webster, Barbara S

2002-12-01

In 1996 the US construction industry comprised 5.4% of the annual US employment but accounted for 7.8% of nonfatal occupational injuries and illness and 9.7% of cases involving at least a day away from work. Information in the published literature on the disability arising from construction injuries is limited. The construction claims experience (n = 35,790) of a large workers' compensation insurer with national coverage was examined. The leading types and sources of disabling occupational morbidity in 1996 in the US construction industry were identified. Disability duration was calculated from indemnity payments data using previously published methods. The average disability duration for an injured construction worker was 46 days with a median of 0 days. The most frequently occurring conditions were low back pain (14.8%), foreign body eye injuries (8.5%), and finger lacerations (4.8%). Back pain also accounted for the greatest percentage of construction claim costs (21.3%) and disability days (25.5%). However, the conditions with the longest disability durations were sudden-onset injuries, including fractures of the ankle (median = 55 days), foot (42 days), and wrist (38 days). Same-level and elevated falls were the principal exposures for fractures of the wrist and ankle, whereas elevated falls and struck by incidents accounted for the majority of foot fractures. Manual materials handling activities were most often associated with low back pain disability. The results suggest that these most disabling injuries can be addressed by increasing primary prevention resources in slips and falls and exposures related to injuries of sudden-onset as well as in reducing manual materials handling and other exposures associated with more gradual-onset injuries.

Ceramic Heads Decrease Metal Release Caused by Head-taper Fretting and Corrosion.

PubMed

Kocagoz, Sevi B; Underwood, Richard J; MacDonald, Daniel W; Gilbert, Jeremy L; Kurtz, Steven M

2016-04-01

Metal release resulting from taper fretting and corrosion is a clinical concern, because wear and corrosion products may stimulate adverse local tissue reactions. Unimodular hip arthroplasties have a conical taper between the femoral head (head bore taper) and the femoral stem (stem cone taper). The use of ceramic heads has been suggested as a way of reducing the generation of wear and corrosion products from the head bore/stem cone taper junction. A previous semiquantitative study found that ceramic heads had less visual evidence of fretting-corrosion damage compared with CoCr heads; but, to our knowledge, no studies have quantified the volumetric material loss from the head bore and stem cone tapers of a matched cohort of ceramic and metal heads. We asked: (1) Do ceramic heads result in less volume of material loss at the head-stem junction compared with CoCr heads; (2) do stem cone tapers have less volumetric material loss compared with CoCr head bore tapers; (3) do visual fretting-corrosion scores correlate with volumetric material loss; and (4) are device, patient, or intraoperative factors associated with volumetric material loss? A quantitative method was developed to estimate volumetric material loss from the head and stem taper in previously matched cohorts of 50 ceramic and 50 CoCr head-stem pairs retrieved during revision surgery for causes not related to adverse reactions to metal particles. The cohorts were matched according to (1) implantation time, (2) stem flexural rigidity, and (3) lateral offset. Fretting corrosion was assessed visually using a previously published four-point, semiquantitative scoring system. The volumetric loss was measured using a precision roundness machine. Using 24 equally spaced axial traces, the volumetric loss was estimated using a linear least squares fit to interpolate the as-manufactured surfaces. The results of this analysis were considered in the context of device (taper angle clearance, head size, head offset, lateral offset, stem material, and stem surface finish) and patient factors that were obtained from the patients' operative records (implantation time, age at insertion, activity level, and BMI). The cumulative volumetric material losses estimated for the ceramic cohort had a median of 0.0 mm(3) per year (range, 0.0-0.4 mm(3)). The cumulative volumetric material losses estimated for the CoCr cohort had a median of 0.1 mm(3) per year (range, 0.0-8.8 mm(3)). An order of magnitude reduction in volumetric material loss was found when a ceramic head was used instead of a CoCr head (p < 0.0001). In the CoCr cohort, the femoral head bore tapers had a median material loss of 0.02 mm(3) (range, 0.0-8.7 mm(3)) and the stem cone tapers had a median material loss of 0.0 mm(3) (range, 0.0-0.32 mm(3)/year). There was greater material loss from femoral head bore tapers compared with stem cone tapers in the CoCr cohort (p < 0.001). There was a positive correlation between visual scoring and volumetric material loss (Spearman's ρ = 0.67, p < 0.01). Although visual scoring was effective for preliminary screening to separate tapers with no or mild damage from tapers with moderate to severe damage, it was not capable of discriminating in the large range of material loss observed at the taper surfaces with moderate to severe fretting-corrosion damage, indicated with a score of 3 or 4. We observed no correlations between volumetric material loss and device and patient factors. The majority of estimated material loss from the head bore-stem cone junctions resulting from taper fretting and corrosion was from the CoCr head bore tapers as opposed to the stem cone tapers. Additionally, the total material loss from the ceramic cohort showed a reduction in the amount of metal released by an order of magnitude compared with the CoCr cohort. We found that ceramic femoral heads may be an effective means by which to reduce metal release caused by taper fretting and corrosion at the head bore-stem cone modular interface in THAs.

An Evaluation of Magazines Suitable for Public Libraries for the Presence of Alkaline Paper.

ERIC Educational Resources Information Center

Gambrill, Linda

Conservation of library materials is becoming an increasing concern, and there has been some effort by publishers to avert the problems created by acidic paper by switching to acid-free alkaline paper. University publishers, responded to this concern by committing themselves to using acid-free paper; however, most commercial publishers, who…

An International Journal's Attempts to Address Inequalities in Academic Publishing: Developing a Writing for Publication Programme

ERIC Educational Resources Information Center

Lillis, Theresa; Magyar, Anna; Robinson-Pant, Anna

2010-01-01

Scholars around the world are under increasing pressure to publish in English, in Anglophone centre journals. At the same time, research on professional academic writing indicates that scholars from outside Anglophone centre contexts face considerable obstacles in getting their academic work published in such journals, relating to material and…

Self-management programmes for people living with chronic obstructive pulmonary disease: a call for a reconceptualisation.

PubMed

Jonsdottir, Helga

2013-03-01

To synthesise findings from previously published studies on the effectiveness of self-management programmes for people with chronic obstructive pulmonary disease. Self-management is a widely valued concept to address contemporary issues of chronic health problems. Yet, findings of self-management programmes for people with chronic obstructive pulmonary disease are indecisive. Literature review of (1) previously published systematic reviews and (2) an integrative literature review. Synthesis of findings from previously published systematic reviews (n = 4) of the effectiveness of self-management programmes for people with chronic obstructive pulmonary disease and an integrated review that was performed on papers published between January 2007-June 2012 (n = 9). Findings demonstrate that there are few studies on the effectiveness of self-management programmes on people with chronic obstructive pulmonary disease despite more than a decade of research activities. Outcomes of the studies reveal some increase in health-related quality of life and reduction in use of healthcare resources. The methodological approaches vary, and the sample size is primarily small. Families are not acknowledged. Features of patient-centredness exist in self-management programmes, particularly in the more recent articles. The effectiveness of self-management programmes for people with chronic obstructive pulmonary disease remains indecisive. A reconceptualisation of self-management programmes is called for with attention to a family-centred, holistic and relational care focusing on living with and minimising the handicapping consequences of the health problems in their entirety. © 2013 Blackwell Publishing Ltd.

High-resolution radiation mapping to investigate FDNPP derived contaminant migration.

PubMed

Martin, P G; Payton, O D; Yamashiki, Y; Richards, D A; Scott, T B

2016-11-01

As of March 2016, five years will have passed since the earthquake and ensuing tsunami that crippled the Fukushima Daiichi Nuclear Power Plant on Japan's eastern coast, resulting in the explosive release of significant quantities of radioactive material. Over this period, significant time and resource has been expended on both the study of the contamination as well as its remediation from the affected environments. Presented in this work is a high-spatial resolution foot-based radiation mapping study using gamma-spectrometry at a site in the contaminated Iitate Village; conducted at different times, seventeen months apart. The specific site selected for this work was one in which consistent uniform agriculture was observed across its entire extent. From these surveys, obtained from along the main northwest trending line of the fallout plume, it was possible to determine the rate of reduction in the levels of contamination around the site attributable to the natural decay of the radiocesium, remediation efforts or material transport. Results from the work suggest that neither the natural decay of radiocesium nor its downward migration through the soil horizons were responsible for the decline in measured activity levels across the site, with the mobilisation of contaminant species likely adhered to soil particulate and the subsequent fluvial transport responsible for the measurable reduction in activity. This transport of contaminant via fluvial methods has already well studied implications for the input of contaminant material entering the neighbouring Pacific Ocean, as well as the deposition of material along rivers within previously decontaminated areas. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

The Natural Hospital Environment: a Socio-Technical-Material perspective.

PubMed

Fernando, Juanita; Dawson, Linda

2014-02-01

This paper introduces two concepts into analyses of information security and hospital-based information systems-- a Socio-Technical-Material theoretical framework and the Natural Hospital Environment. The research is grounded in a review of pertinent literature with previously published Australian (Victoria) case study data to analyse the way clinicians work with privacy and security in their work. The analysis was sorted into thematic categories, providing the basis for the Natural Hospital Environment and Socio-Technical-Material framework theories discussed here. Natural Hospital Environments feature inadequate yet pervasive computer use, aural privacy shortcomings, shared workspace, meagre budgets, complex regulation that hinders training outcomes and out-dated infrastructure and are highly interruptive. Working collaboratively in many cases, participants found ways to avoid or misuse security tools, such as passwords or screensavers for patient care. Workgroup infrastructure was old, architecturally limited, haphazard in some instances, and was less useful than paper handover sheets to ensure the quality of patient care outcomes. Despite valiant efforts by some participants, they were unable to control factors influencing the privacy of patient health information in public hospital settings. Future improvements to hospital-based organisational frameworks for e-health can only be made when there is an improved understanding of the Socio-Technical-Material theoretical framework and Natural Hospital Environment contexts. Aspects within control of clinicians and administrators can be addressed directly although some others are beyond their control. An understanding and acknowledgement of these issues will benefit the management and planning of improved and secure hospital settings. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Heritage materials and biofouling mitigation through UV-C irradiation in show caves: state-of-the-art practices and future challenges.

PubMed

Borderie, Fabien; Alaoui-Sossé, Badr; Aleya, Lotfi

2015-03-01

Biofouling, i.e., colonization of a given substrate by living organisms, has frequently been reported for heritage materials and particularly on stone surfaces such as building facades, historical monuments, and artworks. This also concerns subterranean environments such as show caves, in which the installation of artificial light for tourism has led to the proliferation of phototrophic microorganisms. In Europe nowadays, the use of chemicals in these very sensitive environments is scrutinized and regulated by the European Union. New and environmentally friendly processes must be developed as alternative methods for cave conservation. For several years, the UV irradiation currently used in medical facilities and for the treatment of drinking water has been studied as a new innovative method for the conservation of heritage materials. This paper first presents a review of the biofouling phenomena on stone materials such as building facades and historical monuments. The biological disturbances induced by tourist activity in show caves are then examined, with special attention given to the methods and means to combat them. Thirdly, a general overview is given of the effects of UV-C on living organisms, and especially on photosynthetic microorganisms, through different contexts and studies. Finally, the authors' own experiments and findings are presented concerning the study and use of UV-C irradiation to combat algal proliferation in show caves. Both laboratory and in situ results are summarized and synthesized from their previously published works. The application of UV in caves is discussed and further experiments are proposed to enhance research in this domain.

USGS-NoGaDat - A global dataset of noble gas concentrations and their isotopic ratios in volcanic systems

USGS Publications Warehouse

Abedini, Atosa A.; Hurwitz, S.; Evans, William C.

2006-01-01

The database (Version 1.0) is a MS-Excel file that contains close to 5,000 entries of published information on noble gas concentrations and isotopic ratios from volcanic systems in Mid-Ocean ridges, ocean islands, seamounts, and oceanic and continental arcs (location map). Where they were available we also included the isotopic ratios of strontium, neodymium, and carbon. The database is sub-divided both into material sampled (e.g., volcanic glass, different minerals, fumarole, spring), and into different tectonic settings (MOR, ocean islands, volcanic arcs). Included is also a reference list in MS-Word and pdf from which the data was derived. The database extends previous compilations by Ozima (1994), Farley and Neroda (1998), and Graham (2002). The extended database allows scientists to test competing hypotheses, and it provides a framework for analysis of noble gas data during periods of volcanic unrest.

A comparison of the toxicity and metabolism of phenol and chlorinated phenols by Lemna gibba, with special reference to 2,4,5-trichlorophenol

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharma, H.A.; Barber, J.T.; Ensley, H.E.

1997-02-01

The toxicity of a series of chlorinated phenols, from phenol to pentachlorophenol, was determined using frond reproduction in aseptically grown Lemna gibba. The toxicities of the phenols tended to increase as the number of chlorine substituents on the phenol ring increased. The plants metabolized each of the phenols in the same manner producing metabolites that were more polar than their parent compounds. The metabolite for 2,4,5-trichlorophenol was isolated and identified by nuclear magnetic resonance spectroscopy and chemical ionization mass spectroscopy. The structural identity was confirmed by comparison with synthetic material as 2,4,5-trichlorophenyl-{beta}-D-glucopyranoside. These results, together with previously published results, suggestmore » that conjugation with D-glucose is a stereotypic response of duckweed to challenge by phenol and chlorinated phenols.« less

A modular approach to adaptive structures.

PubMed

Pagitz, Markus; Pagitz, Manuel; Hühne, Christian

2014-10-07

A remarkable property of nastic, shape changing plants is their complete fusion between actuators and structure. This is achieved by combining a large number of cells whose geometry, internal pressures and material properties are optimized for a given set of target shapes and stiffness requirements. An advantage of such a fusion is that cell walls are prestressed by cell pressures which increases, decreases the overall structural stiffness, weight. Inspired by the nastic movement of plants, Pagitz et al (2012 Bioinspir. Biomim. 7) published a novel concept for pressure actuated cellular structures. This article extends previous work by introducing a modular approach to adaptive structures. An algorithm that breaks down any continuous target shapes into a small number of standardized modules is presented. Furthermore it is shown how cytoskeletons within each cell enhance the properties of adaptive modules. An adaptive passenger seat and an aircrafts leading, trailing edge is used to demonstrate the potential of a modular approach.

Fermi level dependence of hydrogen diffusivity in GaN

NASA Astrophysics Data System (ADS)

Polyakov, A. Y.; Smirnov, N. B.; Pearton, S. J.; Ren, F.; Theys, B.; Jomard, F.; Teukam, Z.; Dmitriev, V. A.; Nikolaev, A. E.; Usikov, A. S.; Nikitina, I. P.

2001-09-01

Hydrogen diffusion studies were performed in GaN samples with different Fermi level positions. It is shown that, at 350 °C, hydrogen diffusion is quite fast in heavily Mg doped p-type material with the Fermi level close to Ev+0.15 eV, considerably slower in high-resistivity p-GaN(Zn) with the Fermi level Ev+0.9 eV, while for conducting and semi-insulating n-GaN samples with the Fermi level in the upper half of the band gap no measurable hydrogen diffusion could be detected. For these latter samples it is shown that higher diffusion temperature of 500 °C and longer times (50 h) are necessary to incorporate hydrogen to appreciable depth. These findings are in line with previously published theoretical predictions of the dependence of hydrogen interstitials formation in GaN on the Fermi level position.

Calcium silicate-based cements: composition, properties, and clinical applications.

PubMed

Dawood, Alaa E; Parashos, Peter; Wong, Rebecca H K; Reynolds, Eric C; Manton, David J

2017-05-01

Mineral trioxide aggregate (MTA) is a calcium silicate-based cement (CSC) commonly used in endodontic procedures involving pulpal regeneration and hard tissue repair, such as pulp capping, pulpotomy, apexogenesis, apexification, perforation repair, and root-end filling. Despite the superior laboratory and clinical performance of MTA in comparison with previous endodontic repair cements, such as Ca(OH) 2 , MTA has poor handling properties and a long setting time. New CSC have been commercially launched and marketed to overcome the limitations of MTA. The aim of the present review was to explore the available literature on new CSC products, and to give evidence-based recommendations for the clinical use of these materials. Within the limitations of the available data in the literature regarding the properties and performance of the new CSC, the newer products could be promising alternatives to MTA; however, further research is required to support this assumption. © 2015 Wiley Publishing Asia Pty Ltd.

Microbial biodiversity of the atmosphere

NASA Astrophysics Data System (ADS)

Klein, Ann Maureen

Microorganisms are critical to the functioning of terrestrial and aquatic ecosystems and may also play a role in the functioning of the atmosphere. However, little is known about the diversity and function of microorganisms in the atmosphere. To investigate the forces driving the assembly of bacterial microbial communities in the atmosphere, I measured temporal variation in bacterial diversity and composition over diurnal and inter-day time scales. Results suggest that bacterial communities in the atmosphere markedly vary over diurnal time scales and are likely structured by inputs from both local terrestrial and long-distance sources. To assess the potential functions of bacteria and fungi in the atmosphere, I characterized total and potentially active communities using both RNA- and DNA-based data. Results suggest there are metabolically active microorganisms in the atmosphere that may affect atmospheric functions including precipitation development and carbon cycling. This dissertation includes previously published and unpublished co-authored material.

Applied Computational Fluid Dynamics at NASA Ames Research Center

NASA Technical Reports Server (NTRS)

Holst, Terry L.; Kwak, Dochan (Technical Monitor)

1994-01-01

The field of Computational Fluid Dynamics (CFD) has advanced to the point where it can now be used for many applications in fluid mechanics research and aerospace vehicle design. A few applications being explored at NASA Ames Research Center will be presented and discussed. The examples presented will range in speed from hypersonic to low speed incompressible flow applications. Most of the results will be from numerical solutions of the Navier-Stokes or Euler equations in three space dimensions for general geometry applications. Computational results will be used to highlight the presentation as appropriate. Advances in computational facilities including those associated with NASA's CAS (Computational Aerosciences) Project of the Federal HPCC (High Performance Computing and Communications) Program will be discussed. Finally, opportunities for future research will be presented and discussed. All material will be taken from non-sensitive, previously-published and widely-disseminated work.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perl, M.

This is a history of my discovery of the tau lepton in the 1970s for which I was awarded the Nobel Prize in Physics. I have previously described some aspects of the discovery. In 1996 in my collection of papers entitled, ''Reflections on Experimental Science,'' I gave a straightforward account of the experimental method and the physics involved in the discovery as an introduction to the collection. In a 2002 paper written with Mary A. Meyer published in the journal ''Theoria et Historia Scientiarum'' I used the story of the discovery to outline my thoughts on the practice of experimentalmore » science. That 2002 paper was written primarily for young women and men who are beginning their lives in science and it was based on a lecture given at Los Alamos National Laboratory. Some of the historical material in this paper has appeared in those two earlier papers.« less

Refractive-index measurement and inverse correction using optical coherence tomography.

PubMed

Stritzel, Jenny; Rahlves, Maik; Roth, Bernhard

2015-12-01

We describe a novel technique for determination of the refractive index of hard biological tissue as well as nonopaque technical samples based on optical coherence tomography (OCT). Our method relies on an inverse refractive-index correction (I-RIC), which matches a measured feature geometry distorted due to refractive-index boundaries to its real geometry. For known feature geometry, the refractive index can be determined with high precision from the best match between the distorted and corrected images. We provide experimental data for refractive-index measurements on a polymethylmethacrylate (PMMA) and on an ex vivo porcine cranial-bone, which are compared to reference measurements and previously published data. Our method is potentially capable of in vivo measurements on rigid biological tissue such as bone as, for example, is required to improve guidance in robot-aided surgical interventions and also for retrieving complex refractive-index profiles of compound materials.