Fiberglass distribution poles: A case study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, M.F.; Hosford, G.S.; Boozer, J.F. III

1995-01-01

This paper addresses the design considerations and manufacturing techniques along with mechanical test results of fiberglass reinforced composite (FRC) primary distribution poles. With it`s light weight, and virtually no maintenance it offers a viable alternative for use in remote and inaccessible locations. This paper also discusses a case study where seventy five FRC primary distribution poles have been installed on a distribution system in a remote area accessible only by foot and helicopter.

Investigation of Pier Scour in Coarse-Bed Streams in Montana, 2001 through 2007

DOT National Transportation Integrated Search

2011-01-01

Determination of pier-scour potential is an important consideration in the hydraulic analysis and design of highway bridges that cross streams, rivers, and other waterways in the United States. A primary goal of ongoing research in the field of bridg...

Key elements of high-quality practice organisation in primary health care: a systematic review.

PubMed

Crossland, Lisa; Janamian, Tina; Jackson, Claire L

2014-08-04

To identify elements that are integral to high-quality practice and determine considerations relating to high-quality practice organisation in primary care. A narrative systematic review of published and grey literature. Electronic databases (PubMed, CINAHL, the Cochrane Library, Embase, Emerald Insight, PsycInfo, the Primary Health Care Research and Information Service website, Google Scholar) were searched in November 2013 and used to identify articles published in English from 2002 to 2013. Reference lists of included articles were searched for relevant unpublished articles and reports. Data were configured at the study level to allow for the inclusion of findings from a broad range of study types. Ten elements were most often included in the existing organisational assessment tools. A further three elements were identified from an inductive thematic analysis of descriptive articles, and were noted as important considerations in effective quality improvement in primary care settings. Although there are some validated tools available to primary care that identify and build quality, most are single-strategy approaches developed outside health care settings. There are currently no validated organisational improvement tools, designed specifically for primary health care, which combine all elements of practice improvement and whose use does not require extensive external facilitation.

Historical trend in the research and development of aircraft

NASA Technical Reports Server (NTRS)

Spearman, M. L.

1981-01-01

Results are presented from a study of aircraft design trends undertaken to determine the relationship between research, development, test and evaluation and aircraft mission capability, requirements and objectives. It is shown that while in some cases a performance objective was the primary research driver, research was the driver in the formulation of objectives in others. Among the topics discussed are: (1) speed considerations such as compressibility, propulsion and test techniques; (2) airframe considerations such as swept, delta, trapezoidal and variable-sweep planforms and mission commonality; (3) research aircraft; (4) the recent impact of computer-aided design; (5) Soviet aircraft development approaches and (6) a comparison of Soviet and U.S. military aircraft design trends. Attention is given to experimental and prototype aircraft programs which, although cancelled, anticipated significant subsequent developments.

The Impact of Cognitive Dissonance on Learning Work Behavior

ERIC Educational Resources Information Center

Dechawatanapaisal, Decha; Siengthai, Sununta

2006-01-01

Purpose: This research proposes a framework, which identifies the underlying factors that shape learning behavior in the workplace. It takes organizational members' perspectives into consideration to gain better understanding on managing people and their behavior in the organizational learning process. Design/methodology/approach: Primary data…

Design considerations and rationale of a multi-center trial to sustain weight loss: the Weight Loss Maintenance Trial.

PubMed

Brantley, Phillip; Appel, Lawrence; Hollis, Jack; Stevens, Victor; Ard, Jamy; Champagne, Catherine; Elmer, Patricia; Harsha, David; Myers, Valerie; Proschan, Michael; William, Vollmer; Svetkey, Laura

2008-01-01

The Weight Loss Maintenance Trial (WLM) is a multi-center, randomized, controlled trial that compares the effects of two 30-month maintenance interventions, i.e., Personal Contact (PC) and Interactive Technology (IT) to a self-directed usual care control group (SD), in overweight or obese individuals who are at high risk for cardiovascular disease. This paper provides an overview of the design and methods, and design considerations and lessons learned from this trial. All participants received a 6-month behavioral weight loss program consisting of weekly group sessions. Participants who lost 4 kg were randomized to one of three conditions (PC, IT, or SD). The PC condition provided monthly contacts with an interventionist primarily via telephone and quarterly face-to-face visits. The IT condition provided frequent, individualized contact through a tailored, website system. Both the PC and IT maintenance programs encouraged the DASH dietary pattern and employed theory-based behavioral techniques to promote maintenance. Design considerations included choice of study population, frequency and type of intervention visits, and choice of primary outcome. Overweight or obese persons with CVD risk factors were studied. The pros and cons of studying this population while excluding others are presented. We studied intervention contact strategies that made fewer demands on participant time and travel, while providing frequent opportunities for interaction. The primary outcome variable for the trial was change in weight from randomization to end of follow-up (30 months). Limits to generalizability are discussed. Individuals in need of weight loss strategies may have been excluded due to barriers associated with internet use. Other participants may have been excluded secondary to a comorbid condition. This paper highlights the design and methods of WLM and informs readers of discussions of critical issues and lessons learned from the trial.

Effect of fossil fuels on the parameters of CO2 capture.

PubMed

Nagy, Tibor; Mizsey, Peter

2013-08-06

The carbon dioxide capture is a more and more important issue in the design and operation of boilers and/or power stations because of increasing environmental considerations. Such processes, absorber desorber should be able to cope with flue gases from the use of different fossil primary energy sources, in order to guarantee a flexible, stable, and secure energy supply operation. The changing flue gases have significant influence on the optimal operation of the capture process, that is, where the required heating of the desorber is the minimal. Therefore special considerations are devoted to the proper design and control of such boiler and/or power stations equipped with CO2 capture process.

Materials Lifecycle and Environmental Consideration at NASA

NASA Technical Reports Server (NTRS)

Clark-Ingram, Marceia

2010-01-01

The aerospace community faces tremendous challenges with continued availability of existing material supply chains during the lifecycle of a program. Many obsolescence drivers affect the availability of materials: environmental safety ahd health regulations, vendor and supply economics, market sector demands,and natural disasters. Materials selection has become increasingly more critical when designing aerospace hardware. NASA and DoD conducted a workshop with subject matter experts to discuss issues and define solutions for materials selections during the lifecycle phases of a product/system/component. The three primary lifecycle phases were: Conceptualization/Design, Production & Sustainment, and End of life / Reclamation. Materials obsolescence and pollution prevention considerations were explored for the aforementioned lifecycle phases. The recommended solutions from the workshop are being presented.

Optical System Design for the Next Generation Space Telescope

NASA Technical Reports Server (NTRS)

Solomon, Leonard H. (Principal Investigator); Kahan, Mark A.

1996-01-01

This report provides considerations and suggested approaches for design of the Optical Telescope Assembly and the segmented primary mirror of a Next Generation Space Telescope (NGST). Based on prior studies and hardware development, we provide data and design information on low-risk materials and hardware configurations most likely to meet low weight, low temperature and long-life requirements of the nominal 8-meter aperture NGST. We also provide preliminary data for cost and performance trades, and recommendations for technology development and demonstration required to support the system design effort.

Comparative relationship of fiber strength and yarn tenacity in four cotton cultivars

USDA-ARS?s Scientific Manuscript database

High volume instrumentation (HVITM) measurement is a primary and routine tool of providing fiber properties to cotton researchers. There have been considerable studies designed to derive yarn quality from acquired fiber quality data by various means, including HVI. There is also of desired informati...

50 CFR 424.12 - Criteria for designating critical habitat.

Code of Federal Regulations, 2012 CFR

2012-10-01

... sufficiently well known to permit identification of an area as critical habitat. (b) In determining what areas... essential to the conservation of a given species and that may require special management considerations or... elements within the defined area that are essential to the conservation of the species. Known primary...

Guidelines for Reporting Quantitative Methods and Results in Primary Research

ERIC Educational Resources Information Center

Norris, John M.; Plonsky, Luke; Ross, Steven J.; Schoonen, Rob

2015-01-01

Adequate reporting of quantitative research about language learning involves careful consideration of the logic, rationale, and actions underlying both study designs and the ways in which data are analyzed. These guidelines, commissioned and vetted by the board of directors of "Language Learning," outline the basic expectations for…

Security of Personal Computer Systems: A Management Guide.

ERIC Educational Resources Information Center

Steinauer, Dennis D.

This report describes management and technical security considerations associated with the use of personal computer systems as well as other microprocessor-based systems designed for use in a general office environment. Its primary objective is to identify and discuss several areas of potential vulnerability and associated protective measures. The…

The design, construction and testing of the optics for a 147-cm-aperture telescope

NASA Technical Reports Server (NTRS)

Buchroeder, R. A.; Elmore, L. H.; Shack, R. V.; Slater, P. N.

1972-01-01

Geodetic optics research for the Air Force Cambridge Research Laboratories (AFCRL) is described. The work consisted mainly of the fabrication of the optical components for a telescope with a 152-cm-diam (60-in.) primary mirror masked down to 147-cm-diam for use by the AFCRL for a lunar ranging experiment. Among the achievements of this contract were the following: completion of the primary and secondary mirrors for a high-quality 147-cm-diam telescope system in eight months from the start of edging the primary; manufacture and testing of a unique center mount for the primary according to an AFCRL design that allowed for a thin-edged and therefore less-massive mirror; and development of a quantitative analysis of the wire test for calculating the departure of the mirror figure from the design figure quickly and accurately after each polishing step. This analysis method in conjunction with a knowledge of polishing rates for given weights and diameters of tools, mirror, and polishing materials should considerably reduce the polishing time required for future large mirrors.

System description and analysis. Part 1: Feasibility study for helicopter/VTOL wide-angle simulation image generation display system

NASA Technical Reports Server (NTRS)

1977-01-01

A preliminary design for a helicopter/VSTOL wide angle simulator image generation display system is studied. The visual system is to become part of a simulator capability to support Army aviation systems research and development within the near term. As required for the Army to simulate a wide range of aircraft characteristics, versatility and ease of changing cockpit configurations were primary considerations of the study. Due to the Army's interest in low altitude flight and descents into and landing in constrained areas, particular emphasis is given to wide field of view, resolution, brightness, contrast, and color. The visual display study includes a preliminary design, demonstrated feasibility of advanced concepts, and a plan for subsequent detail design and development. Analysis and tradeoff considerations for various visual system elements are outlined and discussed.

Environmental Assessment. Instructor Guide. Working for Clean Water: An Information Program for Advisory Groups.

ERIC Educational Resources Information Center

Buskirk, E. Drannon, Jr.

Described is an hour-long learning session on environmental assessment that is designed to help citizen advisory groups improve decision making in water quality planning. The instructor's guide addresses: (1) environmental considerations in water quality planning, and (2) the identification of primary and secondary impacts of wastewater projects.…

Teaching Economics in American History. A Teacher's Manual for Secondary Schools.

ERIC Educational Resources Information Center

Dawson, George G.; Prehn, Edward C.

Designed for secondary teachers to use in conjunction with a textbook, the teaching guide assists the teacher in incorporating economic facts, concepts, and principles in a United States history course. The primary purpose is to identify historical events which can be enriched by consideration of relevant economic topics in an interdisciplinary…

78 FR 69520 - Designation of the Primary Freight Network

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-19

... NFN may fit into a multimodal National Freight System; and (5) suggestions for an urban-area route... Nation, to include goods movement in urban areas. Urban areas of 200,000 and above include a freight... Consideration for Critical Urban Freight Routes in the National Freight Network The DOT recognizes that many...

Doing the Humanities: The Use of Undergraduate Classroom Humanities Research Projects.

ERIC Educational Resources Information Center

Geib, George W.

"American Visions" is a freshman-level survey course offered by the Department of History as part of Butler University's core curriculum. The course is built around three primary contextual considerations: high culture, popular culture, and community culture. The high culture approach is designed to introduce students to major systems of thought…

A constructed wet meadow model for forested lands in the Southwest

Treesearch

Dave Pawelek; Roy Jemison; Daniel Neary

1999-01-01

Improving primary roads in the Zuni Mountains of New Mexico must take into consideration the wet meadows and upland areas. This study looks at spring flow rates, erosion, channels and changes in plant cover and composition. The goal is to help planners design environmentally sensitive roadways for wet meadow areas.

Considerations for ceramic inlays in posterior teeth: a review

PubMed Central

Hopp, Christa D; Land, Martin F

2013-01-01

This review of ceramic inlays in posterior teeth includes a review of the history of ceramic restorations, followed by common indications and contraindications for their use. A discussion on the potential for tooth wear is followed by a review of recommended preparation design considerations, fabrication methods, and material choices. Despite the improved materials available for fabrication of porcelain inlays, fracture remains a primary mode of inlay failure. Therefore, a brief discussion on strengthening methods for ceramics is included. The review concludes with a section on luting considerations, and offers the clinician specific recommendations for luting procedures. In conclusion, inlay success rates and longevity, as reported in the literature, are summarized. PMID:23750101

Implementation of the Interdisciplinary Generalist Curriculum Project: considerations of structure, funding, and design.

PubMed

Wilson, M; Kahn, N; Wartman, S

2001-04-01

Implementation of the Interdisciplinary Generalist Curriculum (IGC) Project involved complex processes that reflect structural, funding, and intervention design considerations. Among structural considerations, the IGC Project benefited from a national structure above the level of the demonstration schools. Governance by committee was highly effective because it harnessed and balanced power. At the national level, governance by committee was enhanced by strong central coordination, and it had a role-modeling effect for governance at the school level. The IGC experience over the seven-year course of the project suggests that it is important to revisit the role of a national advisory committee over time and to revise that role as warranted. Funding considerations, including the importance of funding evaluation for a period of time long enough to measure intended impacts and the length and amount of funding to demonstration schools, are discussed. Prescription of the IGC intervention and the focus on years one and two of medical education are critical design considerations. The authors conclude that the IGC Project used relatively few federal dollars to demonstrate a highly prescribed intervention in a limited number of medical schools toward a clear and limited goal. IGC lessons apply to programs specifically targeting primary care education, but also to other medical school curricular innovations, and perhaps, to a larger framework of multi-site educational interventions.

Aircraft empennage structural detail design

NASA Technical Reports Server (NTRS)

Meholic, Greg; Brown, Rhonda; Hall, Melissa; Harvey, Robert; Singer, Michael; Tella, Gustavo

1993-01-01

This project involved the detailed design of the aft fuselage and empennage structure, vertical stabilizer, rudder, horizontal stabilizer, and elevator for the Triton primary flight trainer. The main design goals under consideration were to illustrate the integration of the control systems devices used in the tail surfaces and their necessary structural supports as well as the elevator trim, navigational lighting system, electrical systems, tail-located ground tie, and fuselage/cabin interface structure. Accommodations for maintenance, lubrication, adjustment, and repairability were devised. Weight, fabrication, and (sub)assembly goals were addressed. All designs were in accordance with the FAR Part 23 stipulations for a normal category aircraft.

Research design considerations for chronic pain prevention clinical trials: IMMPACT recommendations

PubMed Central

Gewandter, Jennifer S.; Dworkin, Robert H.; Turk, Dennis C.; Farrar, John T.; Fillingim, Roger B.; Gilron, Ian; Markman, John D.; Oaklander, Anne Louise; Polydefkis, Michael J.; Raja, Srinivasa N.; Robinson, James P.; Woolf, Clifford J.; Ziegler, Dan; Ashburn, Michael A.; Burke, Laurie B.; Cowan, Penney; George, Steven Z.; Goli, Veeraindar; Graff, Ole X.; Iyengar, Smriti; Jay, Gary W.; Katz, Joel; Kehlet, Henrik; Kitt, Rachel A.; Kopecky, Ernest A.; Malamut, Richard; McDermott, Michael P.; Palmer, Pamela; Rappaport, Bob A.; Rauschkolb, Christine; Steigerwald, Ilona; Tobias, Jeffrey; Walco, Gary A.

2018-01-01

Although certain risk factors can identify individuals who are most likely to develop chronic pain, few interventions to prevent chronic pain have been identified. To facilitate the identification of preventive interventions, an IMMPACT meeting was convened to discuss research design considerations for clinical trials investigating the prevention of chronic pain. We present general design considerations for prevention trials in populations that are at relatively high risk for developing chronic pain. Specific design considerations included subject identification, timing and duration of treatment, outcomes, timing of assessment, and adjusting for risk factors in the analyses. We provide a detailed examination of 4 models of chronic pain prevention (i.e., chronic post-surgical pain, postherpetic neuralgia, chronic low back pain, and painful chemotherapy-induced peripheral neuropathy). The issues discussed can, in many instances, be extrapolated to other chronic pain conditions. These examples were selected because they are representative models of primary and secondary prevention, reflect persistent pain resulting from multiple insults (i.e., surgery, viral infection, injury, and toxic/noxious element exposure), and are chronically painful conditions that are treated with a range of interventions. Improvements in the design of chronic pain prevention trials could improve assay sensitivity and thus accelerate the identification of efficacious interventions. Such interventions would have the potential to reduce the prevalence of chronic pain in the population. Additionally, standardization of outcomes in prevention clinical trials will facilitate meta-analyses and systematic reviews and improve detection of preventive strategies emerging from clinical trials. PMID:25887465

Research design considerations for chronic pain prevention clinical trials: IMMPACT recommendations.

PubMed

Gewandter, Jennifer S; Dworkin, Robert H; Turk, Dennis C; Farrar, John T; Fillingim, Roger B; Gilron, Ian; Markman, John D; Oaklander, Anne Louise; Polydefkis, Michael J; Raja, Srinivasa N; Robinson, James P; Woolf, Clifford J; Ziegler, Dan; Ashburn, Michael A; Burke, Laurie B; Cowan, Penney; George, Steven Z; Goli, Veeraindar; Graff, Ole X; Iyengar, Smriti; Jay, Gary W; Katz, Joel; Kehlet, Henrik; Kitt, Rachel A; Kopecky, Ernest A; Malamut, Richard; McDermott, Michael P; Palmer, Pamela; Rappaport, Bob A; Rauschkolb, Christine; Steigerwald, Ilona; Tobias, Jeffrey; Walco, Gary A

2015-07-01

Although certain risk factors can identify individuals who are most likely to develop chronic pain, few interventions to prevent chronic pain have been identified. To facilitate the identification of preventive interventions, an IMMPACT meeting was convened to discuss research design considerations for clinical trials investigating the prevention of chronic pain. We present general design considerations for prevention trials in populations that are at relatively high risk for developing chronic pain. Specific design considerations included subject identification, timing and duration of treatment, outcomes, timing of assessment, and adjusting for risk factors in the analyses. We provide a detailed examination of 4 models of chronic pain prevention (ie, chronic postsurgical pain, postherpetic neuralgia, chronic low back pain, and painful chemotherapy-induced peripheral neuropathy). The issues discussed can, in many instances, be extrapolated to other chronic pain conditions. These examples were selected because they are representative models of primary and secondary prevention, reflect persistent pain resulting from multiple insults (ie, surgery, viral infection, injury, and toxic or noxious element exposure), and are chronically painful conditions that are treated with a range of interventions. Improvements in the design of chronic pain prevention trials could improve assay sensitivity and thus accelerate the identification of efficacious interventions. Such interventions would have the potential to reduce the prevalence of chronic pain in the population. Additionally, standardization of outcomes in prevention clinical trials will facilitate meta-analyses and systematic reviews and improve detection of preventive strategies emerging from clinical trials.

Secondary Containment Design for the LLNL B801 Diala Oil Tank

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mertesdorf, E.

2016-12-14

Design is to add an extension to the secondary containment of tank T1-A3 at building 801. Piping from the inner tank penetrates the secondary containment tank below the liquid level of the primary tank. To meet Oil Pollution Prevention Regulation 40 CFR 120.7 the single wall piping needs to be provided with secondary containment. Steel Tank Institute (STI) conference publication states: §112.3(d)(1)(iii) –SPCC Plan requirements- Systems shall be designed in accordance with good engineering practice, including consideration of applicable industry standards and that procedures for required inspections and testing have been established. Section 112.7(a)(2) allows for deviations from specific rulemore » requirements, provided the Owner/operator responsible to select, document and implement alternate measure and a PE certifies the SPCC Plan in accordance with good engineering practices, including consideration of industry standards« less

Primary studies of Chinese spaceborne SAR

NASA Technical Reports Server (NTRS)

Wang, Zhen-Song; Wu, Guo-Xiang; Guo, Hua-Dong; Wei, Zhong-Quan; Zhu, Min-Hui

1993-01-01

The primary studies on spaceborne synthetic aperture radar (SAR) in China are discussed. The SAR will be launched aboard a Chinese satellite and operated at L-band with HH polarization. The purpose of the mission in consideration is dedicated to resources and environment uses, especially to natural disaster monitoring. The ground resolution is designed as 25 m x 25 m for detailed mode and 100 m x 100 m for wide scan-SAR mode. The off-nadir angle can be varied from 20 to 40 deg. The key system concepts are introduced.

Outsourcing Extra-Curricular Activities: A Management Strategy in a Time of Neoliberal Influence

ERIC Educational Resources Information Center

Ng, Shun Wing; Chan, Tsan Ming Kenneth; Yuen, Wai Kwan Gail

2017-01-01

Purpose: The purpose of this paper is to report on an exploratory study designed to illuminate the complexity of outsourcing extra-curricular activities (ECAs) in primary schools in a time of neoliberal influence and to examine the views of teaching professionals on the reasons, issues and considerations of outsourcing ECAs such as the dynamic…

Can Waking Suggestion Be as Effective as Hypnosis in Increasing Reading Efficiency? A Consideration for Educational Application.

ERIC Educational Resources Information Center

Chappie, David Alexander

The primary problem was concerned with the uses of hypnosis and waking suggestions as means of improving reading efficiency. A second problem concerned rectifying research design inadequacies related to hypnosis experiments. The procedure used pretest scores secured for rate, comprehension, and vocabulary. Subjects were placed in experimental and…

A superconducting levitation vehicle prototype

NASA Astrophysics Data System (ADS)

Stephan, R. M.; Nicolsky, R.; Neves, M. A.; Ferreira, A. C.; de Andrade, R.; Cruz Moreira, M. A.; Rosário, M. A.; Machado, O. J.

2004-08-01

This paper presents a small scale MAGLEV vehicle prototype which is under development at UFRJ. The levitation is done by Y-Ba-Cu-O superconducting blocks refrigerated by liquid nitrogen in the presence of Nd-Fe-B magnets. A long primary linear synchronous motor gives the traction. Design considerations and experimental results show the characteristics and performance of this system.

Display Considerations For Intravascular Ultrasonic Imaging

NASA Astrophysics Data System (ADS)

Gessert, James M.; Krinke, Charlie; Mallery, John A.; Zalesky, Paul J.

1989-08-01

A display has been developed for intravascular ultrasonic imaging. Design of this display has a primary goal of providing guidance information for therapeutic interventions such as balloons, lasers, and atherectomy devices. Design considerations include catheter configuration, anatomy, acoustic properties of normal and diseased tissue, catheterization laboratory and operating room environment, acoustic and electrical safety, acoustic data sampling issues, and logistical support such as image measurement, storage and retrieval. Intravascular imaging is in an early stage of development so design flexibility and expandability are very important. The display which has been developed is capable of acquisition and display of grey scale images at rates varying from static B-scans to 30 frames per second. It stores images in a 640 X 480 X 8 bit format and is capable of black and white as well as color display in multiplevideo formats. The design is based on the industry standard PC-AT architecture and consists of two AT style circuit cards, one for high speed sampling and the other for scan conversion, graphics and video generation.

The research-design interaction: lessons learned from an evidence-based design studio.

PubMed

Haq, Saif; Pati, Debajyoti

2010-01-01

As evidence-based design (EBD) emerges as a model of design practice, considerable attention has been given to its research component. However, this overshadows another essential component of EBD-the change agent, namely the designer. EBD introduced a new skill set to the practitioner: the ability to interact with scientific evidence. Industry sources suggest adoption of the EBD approach across a large number of design firms. How comfortable are these designers in integrating research with design decision making? Optimizing the interaction between the primary change agent (the designer) and the evidence is crucial to producing the desired outcomes. Preliminary to examining this question, an architectural design studio was used as a surrogate environment to examine how designers interact with evidence. Twelve students enrolled in a healthcare EBD studio during the spring of 2009. A three-phase didactic structure was adopted: knowing a hospital, knowing the evidence, and designing with knowledge and evidence. Products of the studio and questionnaire responses from the students were used as the data for analysis. The data suggest that optimization of the research-design relationship warrants consideration in four domains: (1) a knowledge structure that is easy to comprehend; (2) phase-complemented representation of evidence; (3) access to context and precedence information; and (4) a designer-friendly vocabulary.

Recommended conceptual optical system design for China's Large Optical-infrared Telescope (LOT).

PubMed

Ma, Donglin

2018-01-08

Recently, China is planning to construct a new large optical-infrared telescope (LOT), in which the aperture of the primary mirror is as large as 12m. China's LOT is a general-purpose telescope, which is aimed to work with multiple scientific instruments such as spectrographs. Based on the requirements of LOT telescope, we have compared the performance of Ritchey-Chrétien (RC) design and Aplanatic-Gregorian (AG) design from the perspective of scientific performance and construction cost. By taking the primary focal ratio, Nasmyth focal ratio, and telescope's site condition into consideration, we finally recommend a RC f/1.6 design configuration for LOT's Nasmyth telescope system. Unlike the general identical configuration, we choose a non-identical configuration for the telescope system which has a shorter Cassegrain focal ratio compared to the designed Nasmyth focal ratio. The non-identical design can allow for a shorter back focal distance and therefore a shorter telescope fork to guarantee the gravitational stability of the whole telescope structure, as well as relatively lower construction cost. Detailed analysis for the feasibility of our recommended design is provided in this paper.

Design of a Minimum Surface-Effect Three Degree-of-Freedom Micromanipulator

NASA Technical Reports Server (NTRS)

Goldfarb, Michael; Speich, John E.

1997-01-01

This paper describes the fundamental physical motivations for small-scale minimum surface-effect design, and presents a three degree-of-freedom micromanipulator design that incorporates a minimum surface-effect approach. The primary focus of the design is the split-tube flexure, a unique small-scale revolute joint that exhibits a considerably larger range of motion and significantly better multi-axis revolute joint characteristics than a conventional flexure. The development of this joint enables the implementation of a small-scale spatially-loaded revolute joint-based manipulator with well-behaved kinematic characteristics and without the backlash and stick-slip behavior that would otherwise prevent precision control

Designing patient-centric applications for chronic disease management.

PubMed

Tsalatsanis, Athanasios; Gil-Herrera, Eleazar; Yalcin, Ali; Djulbegovic, Benjamin; Barnes, Laura

2011-01-01

Chronic diseases such as diabetes and heart disease are the leading causes of disability and death in the developed world. Technological interventions such as mobile applications have the ability to facilitate and motivate patients in chronic disease management, but these types of interventions present considerable design challenges. The primary objective of this paper is to present the challenges arising from the design and implementation of software applications aiming to assist patients in chronic disease management. We also outline preliminary results regarding a self-management application currently under development targeting young adults suffering from type 1 diabetes.

Canard configured aircraft with 2-D nozzle

NASA Technical Reports Server (NTRS)

Child, R. D.; Henderson, W. P.

1978-01-01

A closely-coupled canard fighter with vectorable two-dimensional nozzle was designed for enhanced transonic maneuvering. The HiMAT maneuver goal of a sustained 8g turn at a free-stream Mach number of 0.9 and 30,000 feet was the primary design consideration. The aerodynamic design process was initiated with a linear theory optimization minimizing the zero percent suction drag including jet effects and refined with three-dimensional nonlinear potential flow techniques. Allowances were made for mutual interference and viscous effects. The design process to arrive at the resultant configuration is described, and the design of a powered 2-D nozzle model to be tested in the LRC 16-foot Propulsion Wind Tunnel is shown.

Research design considerations for confirmatory chronic pain clinical trials: IMMPACT recommendations.

PubMed

Dworkin, Robert H; Turk, Dennis C; Peirce-Sandner, Sarah; Baron, Ralf; Bellamy, Nicholas; Burke, Laurie B; Chappell, Amy; Chartier, Kevin; Cleeland, Charles S; Costello, Ann; Cowan, Penney; Dimitrova, Rozalina; Ellenberg, Susan; Farrar, John T; French, Jacqueline A; Gilron, Ian; Hertz, Sharon; Jadad, Alejandro R; Jay, Gary W; Kalliomäki, Jarkko; Katz, Nathaniel P; Kerns, Robert D; Manning, Donald C; McDermott, Michael P; McGrath, Patrick J; Narayana, Arvind; Porter, Linda; Quessy, Steve; Rappaport, Bob A; Rauschkolb, Christine; Reeve, Bryce B; Rhodes, Thomas; Sampaio, Cristina; Simpson, David M; Stauffer, Joseph W; Stucki, Gerold; Tobias, Jeffrey; White, Richard E; Witter, James

2010-05-01

There has been an increase in the number of chronic pain clinical trials in which the treatments being evaluated did not differ significantly from placebo in the primary efficacy analyses despite previous research suggesting that efficacy could be expected. These findings could reflect a true lack of efficacy or methodological and other aspects of these trials that compromise the demonstration of efficacy. There is substantial variability among chronic pain clinical trials with respect to important research design considerations, and identifying and addressing any methodological weaknesses would enhance the likelihood of demonstrating the analgesic effects of new interventions. An IMMPACT consensus meeting was therefore convened to identify the critical research design considerations for confirmatory chronic pain trials and to make recommendations for their conduct. We present recommendations for the major components of confirmatory chronic pain clinical trials, including participant selection, trial phases and duration, treatment groups and dosing regimens, and types of trials. Increased attention to and research on the methodological aspects of confirmatory chronic pain clinical trials has the potential to enhance their assay sensitivity and ultimately provide more meaningful evaluations of treatments for chronic pain. Copyright 2010 International Association for the Study of Pain. All rights reserved.

Cabin fuselage structural design with engine installation and control system

NASA Technical Reports Server (NTRS)

Balakrishnan, Tanapaal; Bishop, Mike; Gumus, Ilker; Gussy, Joel; Triggs, Mike

1994-01-01

Design requirements for the cabin, cabin system, flight controls, engine installation, and wing-fuselage interface that provide adequate interior volume for occupant seating, cabin ingress and egress, and safety are presented. The fuselage structure must be sufficient to meet the loadings specified in the appropriate sections of Federal Aviation Regulation Part 23. The critical structure must provide a safe life of 10(exp 6) load cycles and 10,000 operational mission cycles. The cabin seating and controls must provide adjustment to account for various pilot physiques and to aid in maintenance and operation of the aircraft. Seats and doors shall not bind or lockup under normal operation. Cabin systems such as heating and ventilation, electrical, lighting, intercom, and avionics must be included in the design. The control system will consist of ailerons, elevator, and rudders. The system must provide required deflections with a combination of push rods, bell cranks, pulleys, and linkages. The system will be free from slack and provide smooth operation without binding. Environmental considerations include variations in temperature and atmospheric pressure, protection against sand, dust, rain, humidity, ice, snow, salt/fog atmosphere, wind and gusts, and shock and vibration. The following design goals were set to meet the requirements of the statement of work: safety, performance, manufacturing and cost. To prevent the engine from penetrating the passenger area in the event of a crash was the primary safety concern. Weight and the fuselage aerodynamics were the primary performance concerns. Commonality and ease of manufacturing were major considerations to reduce cost.

Optical design and performance of F-Theta lenses for high-power and high-precision applications

NASA Astrophysics Data System (ADS)

Yurevich, V. I.; Grimm, V. A.; Afonyushkin, A. A.; Yudin, K. V.; Gorny, S. G.

2015-09-01

F-Theta lenses are widely used in remote laser processing. Nowadays, a large variety of scanning systems utilizing these devices are commercially available. In this paper, we demonstrate that all practical issues lose their triviality in designing high-performance F-Theta scanning systems. Laser power scaling requires attention to thermally-induced phenomena and ghost reflections. This requirement considerably complicates optimization of the optical configuration of the system and primary aberration correction, even during preliminary design. Obtaining high positioning accuracy requires taking into consideration all probable reasons for processing field distortion. We briefly describe the key engineering relationships and invariants as well as the typical design of a scanner lens and the main field-flattening techniques. Specific emphasis is directed to consideration of the fundamental nonlinearity of two-mirror scanners. To the best of our knowledge, this issue has not been yet studied. We also demonstrate the benefits of our F-Theta lens optimization technique, which uses a plurality of entrance pupils. The problems of eliminating focused ghost reflections and the effects of thermally-induced processes in high-power F-Theta lenses are considered. A set of multi-path 3D processing and laser cutting experiments were conducted and are presented herein to demonstrate the impact of laser beam degradation on the process performance. A selection of our non-standard optical designs is presented.

Predicted optical performance of the high-altitude balloon experiment (HABE) telescope in an adverse thermal environment

NASA Astrophysics Data System (ADS)

Akau, Ronald L.; Givler, Richard C.; Eastman, Daniel R.

1994-07-01

The High-Altitude Balloon Experiment telescope was designed to operate at an ambient temperature of -55 degree(s)C and an altitude of 26 km, using a precooled primary mirror. Although at this altitude the air density is only 1.4 percent of the value at sea level, the temperature gradients within the telescope are high enough to deform the optical wavefront. This problem is considerably lessened by precooling the primary mirror to -35 degree(s)C. This paper describes the application of several codes to determine the range of wavefront deformation during a mission.

Design Considerations for a Web-based Database System of ELISpot Assay in Immunological Research

PubMed Central

Ma, Jingming; Mosmann, Tim; Wu, Hulin

2005-01-01

The enzyme-linked immunospot (ELISpot) assay has been a primary means in immunological researches (such as HIV-specific T cell response). Due to huge amount of data involved in ELISpot assay testing, the database system is needed for efficient data entry, easy retrieval, secure storage, and convenient data process. Besides, the NIH has recently issued a policy to promote the sharing of research data (see http://grants.nih.gov/grants/policy/data_sharing). The Web-based database system will be definitely benefit to data sharing among broad research communities. Here are some considerations for a database system of ELISpot assay (DBSEA). PMID:16779326

Bildung in Stufen: Programm und Planung fur ein dynamisches Bildungsystem (Learning by Steps: Programs and Plans for a Dynamic Educational System).

ERIC Educational Resources Information Center

Minister for Kultus, Unterricht und Volksbildung, Saarbrucken (Germany).

This report issued by the Minister of Public Education for the Saarland reviews current governmental policies and plans designed to effect an improved system of instruction from the primary to the university level. Consideration is also given to continuing education and education for the handicapped. Proceeding on the premise that the task of…

A Qualitative Investigation of the Attitudes and Self-Perceptions of Music Theory Faculty Not Trained in Teaching Pedagogy on Their Classroom Effectiveness

ERIC Educational Resources Information Center

Shanefield, Andrew

2011-01-01

Historically, college teachers have received little to no training in teaching and course design (Weimer, 1990), as content mastery was, and still is, a primary credential for employment consideration. Moreover, traditional teacher training programs have been the focus of the K-12 domain, where pedagogy and content go hand in hand (National…

A framework for sustainable nanomaterial selection and design based on performance, hazard, and economic considerations.

PubMed

Falinski, Mark M; Plata, Desiree L; Chopra, Shauhrat S; Theis, Thomas L; Gilbertson, Leanne M; Zimmerman, Julie B

2018-04-30

Engineered nanomaterials (ENMs) and ENM-enabled products have emerged as potentially high-performance replacements to conventional materials and chemicals. As such, there is an urgent need to incorporate environmental and human health objectives into ENM selection and design processes. Here, an adapted framework based on the Ashby material selection strategy is presented as an enhanced selection and design process, which includes functional performance as well as environmental and human health considerations. The utility of this framework is demonstrated through two case studies, the design and selection of antimicrobial substances and conductive polymers, including ENMs, ENM-enabled products and their alternatives. Further, these case studies consider both the comparative efficacy and impacts at two scales: (i) a broad scale, where chemical/material classes are readily compared for primary decision-making, and (ii) within a chemical/material class, where physicochemical properties are manipulated to tailor the desired performance and environmental impact profile. Development and implementation of this framework can inform decision-making for the implementation of ENMs to facilitate promising applications and prevent unintended consequences.

Design principles of water sensitive in settlement area on the river banks

NASA Astrophysics Data System (ADS)

Ryanti, E.; Hasriyanti, N.; Utami, W. D.

2018-03-01

This research will formulate the principle of designing settlement area of Kapuas River Pontianak with the approach of water sensitive concept of urban design (WSUD) the densely populated settlement area. By using a case study the approach that is a dense settlement area located on the banks of the river with literature study techniques to formulate the aspects considered and components that are set in the design, descriptive analysis with the rationalistic paradigm for identification characteristics of the settlement in the river banks areas with consideration of WSUD elements and formulate the principles of designing water-sensitive settlement areas. This research is important to do because the problems related to the water management system in the existing riverside settlement in Pontianak has not been maximal to do. So the primary of this research contains several objectives that will be achieved that is identifying the characteristics of riverside settlement area based on consideration of design aspects of the area that are sensitive to water and the principle of designing the area so that the existing problem structure will be formulated in relation to the community’s need for infrastructure in settlement environment and formulate and develop appropriate technology guidelines for integrated water management systems in riverside settlement areas and design techniques for water-sensitive settlements (WSUD).

Antenna system for MSAT mission

NASA Technical Reports Server (NTRS)

Karlsson, Ingmar; Patenaude, Yves; Stipelman, Leora

1988-01-01

Spar has evaluated and compared several antenna concepts for the North American Mobile Satellite. The paper describes some of the requirements and design considerations for the antennas and demonstrates the performance of antenna concepts that can meet them. Multiple beam reflector antennas are found to give best performance and much of the design effort has gone into the design of the primary feed radiators and beam forming networks to achieve efficient beams with good overlap and flexibility. Helices and cup dipole radiators have been breadboarded as feed element candidates and meausured results are presented. The studies and breadboard activities have made it possible to proceed with a flight program.

Flow visualization techniques in the Airborne Laser Laboratory program

NASA Technical Reports Server (NTRS)

Walterick, R. E.; Vankuren, J. T.

1980-01-01

A turret/fairing assembly for laser applications was designed and tested. Wind tunnel testing was conducted using flow visualization techniques. The techniques used have included the methods of tufting, encapsulated liquid crystals, oil flow, sublimation and schlieren and shadowgraph photography. The results were directly applied to the design of fairing shapes for minimum drag and reduced turret buffet. In addition, the results are of primary importance to the study of light propagation paths in the near flow field of the turret cavity. Results indicate that the flow in the vicinity of the turret is an important factor for consideration in the design of suitable turret/fairing or aero-optic assemblies.

Support optimization of the ring primary mirror of a 2m solar telescope

NASA Astrophysics Data System (ADS)

Yang, Dehua; Jin, Zhenyu; Liu, Zhong

2016-08-01

A special 2-m Ring Solar Telescope (2-m RST) is to be built by YNAO-Yunnan Astronomical Observatory, Kunming, China. Its distinct primary mirror is distinctively shaped in a ring with an outer diameter of 2.02 m and a ring width of 0.35 m. Careful calculation and optimization of the mirror support pattern have been carried out first of all to define optimum blank parameters in view of performance balance of support design, fabrication and cost. This paper is to review the special consideration and optimization of the support design for the unique ring mirror. Schott zerodur is the prevailing candidate for the primary mirror blank. Diverse support patterns with various blank thicknesses have been discussed by extensive calculation of axial support pattern of the mirror. We reached an optimum design of 36 axial supports for a blank thickness of 0.15 m with surface error of 5 nm RMS. Afterwards, lateral support scheme was figured out for the mirror with settled parameters. A classical push-and-pull scheme was used. Seeing the relative flexibility of the ring mirror, special consideration was taken to unusually set the acting direction of the support forces not in the mirror gravity plane, but along the gravity of the local virtual slices of the mirror blank. Nine couples of the lateral push-pull force are considered. When pointing to horizon, the mirror surface exhibits RMS error of 5 nm with three additional small force couples used to compensate for the predominant astigmatism introduced by lateral supports. Finally, error estimation has been performed to evaluate the surface degradation with introduced errors in support force and support position, respectively, for both axial and lateral supports. Monte Carlo approach was applied using unit seeds for amplitude and position of support forces. The comprehensive optimization and calculation suggests the support systems design meet the technic requirements of the ring mirror of the 2-m RST.

A vision for chronic disease prevention intervention research: report from a workshop.

PubMed

Ashbury, Frederick D; Little, Julian; Ioannidis, John P A; Kreiger, Nancy; Palmer, Lyle J; Relton, Clare; Taylor, Peter

2014-04-17

The Population Studies Research Network of Cancer Care Ontario hosted a strategic planning workshop to establish an agenda for a prevention intervention research program in Ontario, including priority topics for investigation and design considerations. The two-day workshop included: presentations on background papers developed to facilitate participants' preparation for and discussions in the workshop; keynote presentations on intervention research concerning primary prevention of chronic diseases, design and study implementation considerations; a dedicated session on critical and creative thinking to stimulate participation and discussion topics; break out groups to identify, discuss and present study ideas, designs, implementation considerations; and a consensus process to discuss and identify recommendations for research priorities and next steps. The retreat yielded the following recommendations: 1) develop an intervention research agenda that includes working with existing large-scale cohorts; 2) develop an intervention research agenda that includes novel research designs that could target individuals or groups; and 3) develop an intervention research agenda in which studies collect data on costs, define stakeholders, and ensure clear strategies for stakeholder engagement and knowledge transfer. The Population Studies Research Network will develop options from these recommendations and release a call for proposals in 2014 for intervention research pilot projects that reflect these recommendations. Pilot projects will be evaluated based on their fit with the retreat's recommendations, and their potential to scale up to full studies and application in practice.

Space astronomical telescopes and instruments; Proceedings of the Meeting, Orlando, FL, Apr. 1-4, 1991

NASA Astrophysics Data System (ADS)

Bely, Pierre Y.; Breckinridge, James B.

The present volume on space astronomical telescopes and instruments discusses lessons from the HST, telescopes on the moon, future space missions, and mirror fabrication and active control. Attention is given to the in-flight performance of the Goddard high-resolution spectrograph of the HST, the initial performance of the high-speed photometer, results from HST fine-guidance sensors, and reconstruction of the HST mirror figure from out-of-focus stellar images. Topics addressed include system concepts for a large UV/optical/IR telescope on the moon, optical design considerations for next-generation space and lunar telescopes, the implications of lunar dust for astronomical observatories, and lunar liquid-mirror telescopes. Also discussed are space design considerations for the Space Infrared Telescope Facility, the Hubble extrasolar planet interferometer, Si:Ga focal-plane arrays for satellite and ground-based telescopes, microchannel-plate detectors for space-based astronomy, and a method for making ultralight primary mirrors.

Post hoc analyses: after the facts.

PubMed

Srinivas, Titte R; Ho, Bing; Kang, Joseph; Kaplan, Bruce

2015-01-01

Prospective clinical trials are constructed with high levels of internal validity. Sample size and power considerations usually address primary endpoints. Primary endpoints have traditionally included events that are becoming increasingly less common and thus have led to growing use of composite endpoints and noninferiority trial designs in transplantation. This approach may mask real clinical benefit in one or the other domain with regard to either clinically relevant secondary endpoints or other unexpected findings. In addition, endpoints solely chosen based on power considerations are prone to misjudgment of actual treatment effect size as well as consistency of that effect. In the instances where treatment effects may have been underestimated, valuable information may be lost if buried within a composite endpoint. In all these cases, analyses and post hoc analyses of data become relevant in informing practitioners about clinical benefits or safety signals that may not be captured by the primary endpoint. On the other hand, there are many pitfalls in using post hoc determined endpoints. This short review is meant to allow readers to appreciate post hoc analysis not as an entity with a single approach, but rather as an analysis with unique limitations and strengths that often raise new questions to be addressed in further inquiries.

Process gas hear recovery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, W.M.; Thurner, R.P.

1977-01-01

In considering the use of regenerative and recuperative heat exchangers for process-gas heat recovery general information regarding heat-exchanger effectiveness versus initial capital investment and operating costs is discussed. Specific examples for preheating combustion air for process furnaces and for using primary and secondary heat exchangers in conjunction with an air-pollution-control system for drying and curing ovens cover basic heat-exchanger design and application considerations as well as investment-payback factors.

Study of solid rocket motors for a space shuttle booster. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Vonderesch, A. H.

1972-01-01

The factors affecting the choice of the 156 inch diameter, parallel burn, solid propellant rocket engine for use with the space shuttle booster are presented. Primary considerations leading to the selection are: (1) low booster vehicle cost, (2) the largest proven transportable system, (3) a demonstrated design, (4) recovery/reuse is feasible, (5) abort can be easily accomplished, and (6) ecological effects are minor.

Bayesian Adaptive Trial Design for a Newly Validated Surrogate Endpoint

PubMed Central

Renfro, Lindsay A.; Carlin, Bradley P.; Sargent, Daniel J.

2011-01-01

Summary The evaluation of surrogate endpoints for primary use in future clinical trials is an increasingly important research area, due to demands for more efficient trials coupled with recent regulatory acceptance of some surrogates as ‘valid.’ However, little consideration has been given to how a trial which utilizes a newly-validated surrogate endpoint as its primary endpoint might be appropriately designed. We propose a novel Bayesian adaptive trial design that allows the new surrogate endpoint to play a dominant role in assessing the effect of an intervention, while remaining realistically cautious about its use. By incorporating multi-trial historical information on the validated relationship between the surrogate and clinical endpoints, then subsequently evaluating accumulating data against this relationship as the new trial progresses, we adaptively guard against an erroneous assessment of treatment based upon a truly invalid surrogate. When the joint outcomes in the new trial seem plausible given similar historical trials, we proceed with the surrogate endpoint as the primary endpoint, and do so adaptively–perhaps stopping the trial for early success or inferiority of the experimental treatment, or for futility. Otherwise, we discard the surrogate and switch adaptive determinations to the original primary endpoint. We use simulation to test the operating characteristics of this new design compared to a standard O’Brien-Fleming approach, as well as the ability of our design to discriminate trustworthy from untrustworthy surrogates in hypothetical future trials. Furthermore, we investigate possible benefits using patient-level data from 18 adjuvant therapy trials in colon cancer, where disease-free survival is considered a newly-validated surrogate endpoint for overall survival. PMID:21838811

A safety incident reporting system for primary care. A systematic literature review and consensus procedure by the LINNEAUS collaboration on patient safety in primary care

PubMed Central

Klemp, Kerstin; Zwart, Dorien; Hansen, Jørgen; Hellebek, Torben; Luettel, Dagmar; Verstappen, Wim; Beyer, Martin; Gerlach, Ferdin M.; Hoffmann, Barbara; Esmail, Aneez

2015-01-01

Background: Incident reporting is widely used in both patient safety improvement programmes, and in research on patient safety. Objective: To identify the key requirements for incident reporting systems in primary care; to develop an Internet-based incident reporting and learning system for primary care. Methods: A literature review looking at the purpose, design and requirements of an incident reporting system (IRS) was used to update an existing incident reporting system, widely used in Germany. Then, an international expert panel with knowledge on IRS developed the criteria for the design of a new web-based incident reporting system for European primary care. A small demonstration project was used to create a web-based reporting system, to be made freely available for practitioners and researchers. The expert group compiled recommendations regarding the desirable features of an incident reporting system for European primary care. These features covered the purpose of reporting, who should be involved in reporting, the mode of reporting, design considerations, feedback mechanisms and preconditions necessary for the implementation of an IRS. Results: A freely available web-based reporting form was developed, based on these criteria. It can be modified for local contexts. Practitioners and researchers can use this system as a means of recording patient safety incidents in their locality and use it as a basis for learning from errors. Conclusion: The LINNEAUS collaboration has provided a freely available incident reporting system that can be modified for a local context and used throughout Europe. PMID:26339835

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Potomac Electric Power Company (PEPCO) and Acres American Incorporated (AAI) have carried out a preliminary design study of water-compensated Compressed Air Energy Storage (CAES) and Underground Pumped Hydroelectric (UPH) plants for siting in geological conditions suitable for hard rock excavations. The work was carried out over a period of three years and was sponsored by the US Department of Energy (DOE), the Electric Power Research Institute (EPRI) and PEPCO. The study was divided into five primary tasks as follows: establishment of design criteria and analysis of impact on power system; selection of site and establishment of site characteristics; formulation ofmore » design approaches; assessment of environmental and safety aspects; and preparation of preliminary design of plant. The salient aspects considered and the conclusions reached during the consideration of the five primary tasks for both CAES and UPH are presented in this Executive Summary, which forms Volume 1 of the series of reports prepared during the study. The investigations and analyses carried out, together with the results and conclusions reached, are described in detail in Volumes 2 through 13 and ten appendices.« less

Evaluating a Modular Decision Support Application for Colorectal Cancer Screening

PubMed Central

Diiulio, Julie B.; Borders, Morgan R.; Sushereba, Christen E.; Saleem, Jason J.; Haverkamp, Donald; Imperiale, Thomas F.

2017-01-01

Summary Background There is a need for health information technology evaluation that goes beyond randomized controlled trials to include consideration of usability, cognition, feedback from representative users, and impact on efficiency, data quality, and clinical workflow. This article presents an evaluation illustrating one approach to this need using the Decision-Centered Design framework. Objective To evaluate, through a Decision-Centered Design framework, the ability of the Screening and Surveillance App to support primary care clinicians in tracking and managing colorectal cancer testing. Methods We leveraged two evaluation formats, online and in-person, to obtain feedback from a range primary care clinicians and obtain comparative data. Both the online and in-person evaluations used mock patient data to simulate challenging patient scenarios. Primary care clinicians responded to a series of colorectal cancer-related questions about each patient and made recommendations for screening. We collected data on performance, perceived workload, and usability. Key elements of Decision-Centered Design include evaluation in the context of realistic, challenging scenarios and measures designed to explore impact on cognitive performance. Results Comparison of means revealed increases in accuracy, efficiency, and usability and decreases in perceived mental effort and workload when using the Screening and Surveillance App. Conclusion The results speak to the benefits of using the Decision-Centered Design approach in the analysis, design, and evaluation of Health Information Technology. Furthermore, the Screening and Surveillance App shows promise for filling decision support gaps in current electronic health records. PMID:28197619

Highly Loaded Composite Strut Test Development

NASA Technical Reports Server (NTRS)

Wu, K. Chauncey; Phelps, James E.; McKenney, Martin J.; Jegley, Dawn C.

2011-01-01

Highly loaded composite struts, representative of structural elements of a proposed truss-based lunar lander descent stage concept, were selected for design, development, fabrication and testing under NASA s Advanced Composites Technology program. The focus of this paper is the development of a capability for experimental evaluation of the structural performance of these struts. Strut lengths range from 60 to over 120 inches, and compressive launch and ascent loads can exceed -100,000 lbs, or approximately two times the corresponding tensile loads. Allowing all possible compressive structural responses, including elastic buckling, were primary considerations for designing the test hardware.

Design, fabrication, and structural testing of a lightweight shadow shield for deep-space application

NASA Technical Reports Server (NTRS)

Miao, D.; Barber, J. R.; Dewitt, R. L.

1977-01-01

Two full-scale, lightweight, double-sheeted shadow shields were developed as the primary element of a deep-space thermal protection system for liquid-hydrogen propellant tankage. The thermal and mechanical considerations used in s, the method of fabrication, and the environmental testing results on a prototype shield are discussed. Testing consisted of a transient cooldown period, a prolonged cold soak, and a transient warmup. The mechanical and thermal analyses used in the shield design are sufficient to produce a lightweight rugged shadow shield assembly that is structurally adequate for its intended application.

A library for the fifteenth through the twenty-first centuries.

PubMed Central

Cooper, R S

1991-01-01

The University of California, San Francisco (UCSF), began developing a program for a new library in 1977, started the design in 1985, began construction in 1988, and opened the library in September 1990. The primary objectives were to design and build a facility that would house print collections under optimal conditions, allow for ten years' growth, be flexible enough to permit future reconfiguration, support present and future technologies, and provide beautiful spaces in which to study. The planning process is summarized, planning concepts are outlined, and considerations for the electronic library are briefly reviewed. Images PMID:2039900

Methodological considerations in the design and implementation of clinical trials.

PubMed

Cirrincione, Constance T; Lavoie Smith, Ellen M; Pang, Herbert

2014-02-01

To review study design issues related to clinical trials led by oncology nurses, with special attention to those conducted within the cooperative group setting; to emphasize the importance of the statistician's role in the process of clinical trials. Studies available at clinicaltrials.gov using experimental designs that have been published in peer-reviewed journals; cooperative group trials are highlighted. The clinical trial is a primary means to test intervention efficacy. A properly designed and powered study with clear and measurable objectives is as important as the intervention itself. Collaboration among the study team, including the statistician, is central in developing and conducting appropriately designed studies. For optimal results, collaboration is an ongoing process that should begin early on. Copyright © 2014 Elsevier Inc. All rights reserved.

Dynamic Positron Emission Tomography [PET] in Man Using Small Bismuth Germanate Crystals

DOE R&D Accomplishments Database

Derenzo, S. E.; Budinger, T. F.; Huesman, R. H.; Cahoon, J. L.

1982-04-01

Primary considerations for the design of positron emission tomographs for medical studies in humans are the need for high imaging sensitivity, whole organ coverage, good spatial resolution, high maximum data rates, adequate spatial sampling with minimum mechanical motion, shielding against out of plane activity, pulse height discrimination against scattered photons, and timing discrimination against accidental coincidences. We discuss the choice of detectors, sampling motion, shielding, and electronics to meet these objectives.

Discharge Chamber Primary Electron Modeling Activities in Three-Dimensions

NASA Technical Reports Server (NTRS)

Steuber, Thomas J.

2004-01-01

Designing discharge chambers for ion thrusters involves many geometric configuration decisions. Various decisions will impact discharge chamber performance with respect to propellant utilization efficiency, ion production costs, and grid lifetime. These hardware design decisions can benefit from the assistance of computational modeling. Computational modeling for discharge chambers has been limited to two-dimensional codes that leveraged symmetry for interpretation into three-dimensional analysis. This paper presents model development activities towards a three-dimensional discharge chamber simulation to aid discharge chamber design decisions. Specifically, of the many geometric configuration decisions toward attainment of a worthy discharge chamber, this paper focuses on addressing magnetic circuit considerations with a three-dimensional discharge chamber simulation as a tool. With this tool, candidate discharge chamber magnetic circuit designs can be analyzed computationally to gain insight into factors that may influence discharge chamber performance such as: primary electron loss width in magnetic cusps, cathode tip position with respect to the low magnetic field volume, definition of a low magnetic field region, and maintenance of a low magnetic field region across the grid span. Corroborating experimental data will be obtained from mockup hardware tests. Initially, simulated candidate magnetic circuit designs will resemble previous successful thruster designs. To provide opportunity to improve beyond previous performance benchmarks, off-design modifications will be simulated and experimentally tested.

Design and methodological considerations of an effectiveness trial of a computer-assisted intervention: an example from the NIDA Clinical Trials Network.

PubMed

Campbell, Aimee N C; Nunes, Edward V; Miele, Gloria M; Matthews, Abigail; Polsky, Daniel; Ghitza, Udi E; Turrigiano, Eva; Bailey, Genie L; VanVeldhuisen, Paul; Chapdelaine, Rita; Froias, Autumn; Stitzer, Maxine L; Carroll, Kathleen M; Winhusen, Theresa; Clingerman, Sara; Perez, Livangelie; McClure, Erin; Goldman, Bruce; Crowell, A Rebecca

2012-03-01

Computer-assisted interventions hold the promise of minimizing two problems that are ubiquitous in substance abuse treatment: the lack of ready access to treatment and the challenges to providing empirically-supported treatments. Reviews of research on computer-assisted treatments for mental health and substance abuse report promising findings, but study quality and methodological limitations remain an issue. In addition, relatively few computer-assisted treatments have been tested among illicit substance users. This manuscript describes the methodological considerations of a multi-site effectiveness trial conducted within the National Institute on Drug Abuse's (NIDA's) National Drug Abuse Treatment Clinical Trials Network (CTN). The study is evaluating a web-based version of the Community Reinforcement Approach, in addition to prize-based contingency management, among 500 participants enrolled in 10 outpatient substance abuse treatment programs. Several potential effectiveness trial designs were considered and the rationale for the choice of design in this study is described. The study uses a randomized controlled design (with independent treatment arm allocation), intention-to-treat primary outcome analysis, biological markers for the primary outcome of abstinence, long-term follow-up assessments, precise measurement of intervention dose, and a cost-effectiveness analysis. Input from community providers during protocol development highlighted potential concerns and helped to address issues of practicality and feasibility. Collaboration between providers and investigators supports the utility of infrastructures that enhance research partnerships to facilitate effectiveness trials and dissemination of promising, technologically innovative treatments. Outcomes from this study will further the empirical knowledge base on the effectiveness and cost-effectiveness of computer-assisted treatment in clinical treatment settings. Copyright © 2011 Elsevier Inc. All rights reserved.

Design and Methodological Considerations of an Effectiveness Trial of a Computer-assisted Intervention: An Example from the NIDA Clinical Trials Network

PubMed Central

Campbell, Aimee N. C.; Nunes, Edward V.; Miele, Gloria M.; Matthews, Abigail; Polsky, Daniel; Ghitza, Udi E.; Turrigiano, Eva; Bailey, Genie L.; VanVeldhuisen, Paul; Chapdelaine, Rita; Froias, Autumn; Stitzer, Maxine L.; Carroll, Kathleen M.; Winhusen, Theresa; Clingerman, Sara; Perez, Livangelie; McClure, Erin; Goldman, Bruce; Crowell, A. Rebecca

2011-01-01

Computer-assisted interventions hold the promise of minimizing two problems that are ubiquitous in substance abuse treatment: the lack of ready access to treatment and the challenges to providing empirically-supported treatments. Reviews of research on computer-assisted treatments for mental health and substance abuse report promising findings, but study quality and methodological limitations remain an issue. In addition, relatively few computer-assisted treatments have been tested among illicit substance users. This manuscript describes the methodological considerations of a multi-site effectiveness trial conducted within the National Institute on Drug Abuse's (NIDA's) National Drug Abuse Treatment Clinical Trials Network (CTN). The study is evaluating a web-based version of the Community Reinforcement Approach, in addition to prize-based contingency management, among 500 participants enrolled in 10 outpatient substance abuse treatment programs. Several potential effectiveness trial designs were considered and the rationale for the choice of design in this study is described. The study uses a randomized controlled design (with independent treatment arm allocation), intention-to-treat primary outcome analysis, biological markers for the primary outcome of abstinence, long-term follow-up assessments, precise measurement of intervention dose, and a cost-effectiveness analysis. Input from community providers during protocol development highlighted potential concerns and helped to address issues of practicality and feasibility. Collaboration between providers and investigators supports the utility of infrastructures that enhance research partnerships to facilitate effectiveness trials and dissemination of promising, technologically innovative treatments. Outcomes from this study will further the empirical knowledge base on the effectiveness and cost-effectiveness of computer-assisted treatment in clinical treatment settings. PMID:22085803

Power generation costs and ultimate thermal hydraulic power limits in hypothetical advanced designs with natural circulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duffey, R.B.; Rohatgi, U.S.

Maximum power limits for hypothetical designs of natural circulation plants can be described analytically. The thermal hydraulic design parameters are those which limit the flow, being the elevations, flow areas, and loss coefficients. WE have found some simple ``design`` equations for natural circulation flow to power ratio, and for the stability limit. The analysis of historical and available data for maximum capacity factor estimation shows 80% to be reasonable and achievable. The least cost is obtained by optimizing both hypothetical plant performance for a given output,a nd the plant layout and design. There is also scope to increase output andmore » reduce cost by considering design variations of primary and secondary pressure, and by optimizing component elevations and loss coefficients. The design limits for each are set by stability and maximum flow considerations, which deserve close and careful evaluation.« less

Modular femoral neck fracture after primary total hip arthroplasty.

PubMed

Sotereanos, Nicholas G; Sauber, Timothy J; Tupis, Todd T

2013-01-01

The use of modular femoral stems in primary total hip arthroplasty has increased considerably in recent years. These modular components offer the surgeon the ability to independently alter version, offset, and length of the femoral component of a hip arthroplasty. This increases the surgeon's ability to accurately recreate the relevant anatomy but increases the possibilities of corrosion and fracture. Multiple case reports have highlighted fractures of these modular components. We present a case of a fracture of a modular design that has had no previously reported modular neck fractures. The patient was informed that data concerning the case would be submitted, and he consented. Copyright © 2013 Elsevier Inc. All rights reserved.

Fire safety design of a mobile quarantine facility

NASA Technical Reports Server (NTRS)

Bass, R. S.; Hirasaki, J. K.

1971-01-01

During the design phase of the Mobile Quarantine Facility (MQF), a primary consideration was fire safety. Therefore, appropriate criteria and ground rules were used in the design and construction of the facility. The fire codes and fire-requirement listings that are used by commerical airlines were supplied to the Manned Spacecraft Center (MSC) by the Federal Aviation Agency (FAA). After these codes were reviewed, a basic ground rule was adopted that flame protection for all combustible materials should be at least equivalent to or better than the standards for commercial aircraft. Because the MQF was designed to operate with an interior atmosphere of air rather than with an oxygen-enriched atmosphere such as that of the Apollo spacecraft cabin, the requirements for MQF material were not as stringent as those for the spacecraft.

Space station experiment definition: Long-term cryogenic fluid storage

NASA Technical Reports Server (NTRS)

Jetley, R. L.; Scarlotti, R. D.

1987-01-01

The conceptual design of a space station Technology Development Mission (TDM) experiment to demonstrate and evaluate cryogenic fluid storage and transfer technologies is presented. The experiment will be deployed on the initial operational capability (IOC) space station for a four-year duration. It is modular in design, consisting of three phases to test the following technologies: passive thermal technologies (phase 1), fluid transfer (phase 2), and active refrigeration (phase 3). Use of existing hardware was a primary consideration throughout the design effort. A conceptual design of the experiment was completed, including configuration sketches, system schematics, equipment specifications, and space station resources and interface requirements. These requirements were entered into the NASA Space Station Mission Data Base. A program plan was developed defining a twelve-year development and flight plan. Program cost estimates are given.

The Blue Emu

NASA Technical Reports Server (NTRS)

Descalzi, Doug; Gillett, John; Gordon, Carlton; Keener, ED; Novak, Ken; Puente, Laura

1993-01-01

The primary goal in designing the Blue Emu was to provide an airline with a cost efficient and profitable means of transporting passengers between the major cities in Aeroworld. The design attacks the market where a demand for inexpensive transportation exists and for this reason the Blue Emu is an attractive investment for any airline. In order to provide a profitable aircraft, special attention was paid to cost and economics. For example, in manufacturing, simplicity was stressed in structural design to reduce construction time and cost. Aerodynamic design employed a tapered wing which reduced the induced drag coefficient while also reducing the weight of the wing. Even the propulsion system was selected with cost effectiveness in mind, yet also to maintain the marketability of the aircraft. Thus, in every aspect of the design, consideration was given to economics and marketability of the final product.

Development of Next Generation Memory Test Experiment for Deployment on a Small Satellite

NASA Technical Reports Server (NTRS)

MacLeod, Todd; Ho, Fat D.

2012-01-01

The original Memory Test Experiment successfully flew on the FASTSAT satellite launched in November 2010. It contained a single Ramtron 512K ferroelectric memory. The memory device went through many thousands of read/write cycles and recorded any errors that were encountered. The original mission length was schedule to last 6 months but was extended to 18 months. New opportunities exist to launch a similar satellite and considerations for a new memory test experiment should be examined. The original experiment had to be designed and integrated in less than two months, so the experiment was a simple design using readily available parts. The follow-on experiment needs to be more sophisticated and encompass more technologies. This paper lays out the considerations for the design and development of this follow-on flight memory experiment. It also details the results from the original Memory Test Experiment that flew on board FASTSAT. Some of the design considerations for the new experiment include the number and type of memory devices to be used, the kinds of tests that will be performed, other data needed to analyze the results, and best use of limited resources on a small satellite. The memory technologies that are considered are FRAM, FLASH, SONOS, Resistive Memory, Phase Change Memory, Nano-wire Memory, Magneto-resistive Memory, Standard DRAM, and Standard SRAM. The kinds of tests that could be performed are read/write operations, non-volatile memory retention, write cycle endurance, power measurements, and testing Error Detection and Correction schemes. Other data that may help analyze the results are GPS location of recorded errors, time stamp of all data recorded, radiation measurements, temperature, and other activities being perform by the satellite. The resources of power, volume, mass, temperature, processing power, and telemetry bandwidth are extremely limited on a small satellite. Design considerations must be made to allow the experiment to not interfere with the satellite s primary mission.

Can emergency medicine research benefit from adaptive design clinical trials?

PubMed

Flight, Laura; Julious, Steven A; Goodacre, Steve

2017-04-01

Adaptive design clinical trials use preplanned interim analyses to determine whether studies should be stopped or modified before recruitment is complete. Emergency medicine trials are well suited to these designs as many have a short time to primary outcome relative to the length of recruitment. We hypothesised that the majority of published emergency medicine trials have the potential to use a simple adaptive trial design. We reviewed clinical trials published in three emergency medicine journals between January 2003 and December 2013. We determined the proportion that used an adaptive design as well as the proportion that could have used a simple adaptive design based on the time to primary outcome and length of recruitment. Only 19 of 188 trials included in the review were considered to have used an adaptive trial design. A total of 154/165 trials that were fixed in design had the potential to use an adaptive design. Currently, there seems to be limited uptake in the use of adaptive trial designs in emergency medicine despite their potential benefits to save time and resources. Failing to take advantage of adaptive designs could be costly to patients and research. It is recommended that where practical and logistical considerations allow, adaptive designs should be used for all emergency medicine clinical trials. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Nuclear safety considerations in the conceptual design of a fast reactor for space electric power and propulsion

NASA Technical Reports Server (NTRS)

Hsieh, T.-M.; Koenig, D. R.

1977-01-01

Some nuclear safety aspects of a 3.2 mWt heat pipe cooled fast reactor with out-of-core thermionic converters are discussed. Safety related characteristics of the design including a thin layer of B4C surrounding the core, the use of heat pipes and BeO reflector assembly, the elimination of fuel element bowing, etc., are highlighted. Potential supercriticality hazards and countermeasures are considered. Impacts of some safety guidelines of space transportation system are also briefly discussed, since the currently developing space shuttle would be used as the primary launch vehicle for the nuclear electric propulsion spacecraft.

Lithium/sulfur dioxide cell and battery safety

NASA Technical Reports Server (NTRS)

Halpert, G.; Anderson, A.

1982-01-01

The new high-energy lithium/sulfur dioxide primary electrochemical cell, having a number of advantages, has received considerable attention as a power source in the past few years. With greater experience and improved design by the manufacturers, this system can be used in a safe manner provided the guidelines for use and safety precautions described herein are followed. In addition to a description of cell design and appropriate definitions, there is a safety precautions checklist provided to guide the user. Specific safety procedures for marking, handling, transportation, and disposal are also given, as is a suggested series of tests, to assure manufacturer conformance to requirements.

Design and Manufacturing Criteria for Beam Position Monitor (BPM) of Taiwan Photon Source (TPS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hsueh, H. P.; Chang, C. C.; Hsu, S. N.

2010-06-23

There are quite some considerations when the button feedthrough is designed and manufactured in a new 3rd generation synchrotron light source like the to-be-constructed TPS. It is the responsibility of the button feedthrough designer to design a feedthrough with the lowest probable HOM problem. It is also required for the designer to analyze the consequences for each possible mechanical error during manufacturing and therefore set standards of tolerance. We have been using MAFIA to optimize the design of feedthrough including flange type on bending chamber section and primary BPM on insertion device section. We also have set some criteria formore » feedthrough manufacturing, inspection, and welding based on hands-on experience on feedthrough electrical properties measuring, sorting, inspection, and laser welding. Here we will present the MAFIA results, electrical measurement results, and laser welding results and analysis. Criteria based on these results will also be presented.« less

Design and Manufacturing Criteria for Beam Position Monitor (BPM) of Taiwan Photon Source (TPS)

NASA Astrophysics Data System (ADS)

Hsueh, H. P.; Chang, C. C.; Hsu, S. N.; Huang, I. T.; Chen, Y. B.; Kuan, C. K.; Hsiung, G. Y.; Chen, J. R.

2010-06-01

There are quite some considerations when the button feedthrough is designed and manufactured in a new 3rd generation synchrotron light source like the to-be-constructed TPS. It is the responsibility of the button feedthrough designer to design a feedthrough with the lowest probable HOM problem. It is also required for the designer to analyze the consequences for each possible mechanical error during manufacturing and therefore set standards of tolerance. We have been using MAFIA to optimize the design of feedthrough including flange type on bending chamber section and primary BPM on insertion device section. We also have set some criteria for feedthrough manufacturing, inspection, and welding based on hands-on experience on feedthrough electrical properties measuring, sorting, inspection, and laser welding. Here we will present the MAFIA results, electrical measurement results, and laser welding results and analysis. Criteria based on these results will also be presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tanaka, T.; Kameyama, M.; Urabe, Y.

At present, cast duplex stainless steel has been used for the primary coolant piping of PWRs in Japan and joints of dissimilar material have been applied for welding to reactor vessels and steam generators. For the primary coolant piping of the next APWR plants, application of low alloy steel that results in designing main loops with the same material is being studied. It means that there is no need to weld low alloy steel with stainless steel and that makes it possible to reduce the welding length. Attenuation of Ultra Sonic Wave Intensity is lower for low alloy steel thanmore » for stainless steel and they have advantageous inspection characteristics. In addition to that, the thermal expansion rate is smaller for low alloy steel than for stainless steel. In consideration of the above features of low alloy steel, the overall reliability of primary coolant piping is expected to be improved. Therefore, for the evaluation of crack stability of low alloy steel piping to be applied for primary loops, elastic-plastic future mechanics analysis was performed by means of a three-dimensioned FEM. The evaluation results for the low alloy steel pipings show that cracks will not grow into unstable fractures under maximum design load conditions, even when such a circumferential crack is assumed to be 6 times the size of the wall thickness.« less

Patients' and practitioners' views on health behaviour change: a qualitative study.

PubMed

Elwell, Laura; Povey, Rachel; Grogan, Sarah; Allen, Candia; Prestwich, Andrew

2013-01-01

This study was designed to examine patients' and health professionals' perspectives on lifestyle behaviour change and to inform the development of a lifestyle behaviour change intervention to be used in primary care. Focus groups were conducted with seven patients and 13 health professionals where they were asked to discuss lifestyle behaviour change in relation to the design and development phase of a tailored lifestyle behaviour change intervention package. An inductive thematic analysis of transcripts suggested a range of issues that are relevant to the development and implementation of lifestyle change interventions such as time, lack of resources and starting interventions too late, as well as personal circumstances and the continuous effort that behaviour change requires. They were interpreted as two superordinate themes of 'internal and external influences on behaviour change' and 'behaviour change initiation and maintenance'. The results are discussed in relation to the implications they may have for researchers and health service commissioners designing interventions and practitioners implementing lifestyle change interventions in primary care. Many factors are involved in patients' and health care professionals' understanding of interventions and lifestyle behaviour change. These should be taken into consideration when designing interventions based on behaviour change theories.

The SDSS-IV MaNGA Sample: Design, Optimization, and Usage Considerations

NASA Astrophysics Data System (ADS)

Wake, David A.; Bundy, Kevin; Diamond-Stanic, Aleksandar M.; Yan, Renbin; Blanton, Michael R.; Bershady, Matthew A.; Sánchez-Gallego, José R.; Drory, Niv; Jones, Amy; Kauffmann, Guinevere; Law, David R.; Li, Cheng; MacDonald, Nicholas; Masters, Karen; Thomas, Daniel; Tinker, Jeremy; Weijmans, Anne-Marie; Brownstein, Joel R.

2017-09-01

We describe the sample design for the SDSS-IV MaNGA survey and present the final properties of the main samples along with important considerations for using these samples for science. Our target selection criteria were developed while simultaneously optimizing the size distribution of the MaNGA integral field units (IFUs), the IFU allocation strategy, and the target density to produce a survey defined in terms of maximizing signal-to-noise ratio, spatial resolution, and sample size. Our selection strategy makes use of redshift limits that only depend on I-band absolute magnitude (M I ), or, for a small subset of our sample, M I and color (NUV - I). Such a strategy ensures that all galaxies span the same range in angular size irrespective of luminosity and are therefore covered evenly by the adopted range of IFU sizes. We define three samples: the Primary and Secondary samples are selected to have a flat number density with respect to M I and are targeted to have spectroscopic coverage to 1.5 and 2.5 effective radii (R e ), respectively. The Color-Enhanced supplement increases the number of galaxies in the low-density regions of color-magnitude space by extending the redshift limits of the Primary sample in the appropriate color bins. The samples cover the stellar mass range 5× {10}8≤slant {M}* ≤slant 3× {10}11 {M}⊙ {h}-2 and are sampled at median physical resolutions of 1.37 and 2.5 kpc for the Primary and Secondary samples, respectively. We provide weights that will statistically correct for our luminosity and color-dependent selection function and IFU allocation strategy, thus correcting the observed sample to a volume-limited sample.

Achieving the Proper Balance Between Crew and Public Safety

NASA Technical Reports Server (NTRS)

Gowan, John; Silvestri, Ray; Stahl, Ben; Rosati, Paul; Wilde, Paul

2011-01-01

A paramount objective of all human-rated launch and reentry vehicle developers is to ensure that the risks to both the crew onboard and the public are minimized within reasonable cost, schedule, and technical constraints. Past experience has shown that proper attention to range safety requirements necessary to ensure public safety must be given early in the design phase to avoid additional operational complexities or threats to the safety of people onboard, and the design engineers must give these requirements the same consideration as crew safety requirements. For human spaceflight, the primary purpose and operational concept for any flight safety system is to protect the public while maximizing the likelihood of crew survival. This paper will outline the policy considerations, technical issues, and operational impacts regarding launch and reentry vehicle failure scenarios where crew and public safety are intertwined and thus addressed optimally in an integrated manner. An overview of existing range and crew safety policy requirements will be presented. Application of these requirements and lessons learned from both the Space Shuttle and Constellation Programs will also be discussed. Using these past programs as examples, the paper will detail operational, design, and analysis approaches to mitigate and balance the risks to people onboard and in the public. Manned vehicle perspectives from the Federal Aviation Administration (FAA) and Air Force organizations that oversee public safety will be summarized as well. Finally, the paper will emphasize the need to factor policy, operational, and analysis considerations into the early design trades of new vehicles to help ensure that both crew and public safety are maximized to the greatest extent possible.

Achieving the Proper Balance between Crew & Public Safety

NASA Astrophysics Data System (ADS)

Wilde, P.; Gowan, J.; Silvestri, R.; Stahl, B.; Rosati, P.

2012-01-01

A paramount objective of all human-rated launch and reentry vehicle developers is to ensure that the risks to both the crew onboard and the public are minimized within reasonable cost, schedule, and technical constraints. Past experience has shown that proper attention to range safety requirements necessary to ensure public safety must be given early in the design phase to avoid additional operational complexities or threats to the safety of people onboard, and the design engineers must give these requirements the same consideration as crew safety requirements. For human spaceflight, the primary purpose and operational concept for any flight safety system is to protect the public while maximizing the likelihood of crew survival. This paper will outline the policy considerations, technical issues, and operational impacts regarding launch and reentry vehicle failure scenarios where crew and public safety are intertwined and thus addressed optimally in an integrated manner. An overview of existing range and crew safety policy requirements will be presented. Application of these requirements and lessons learned from both the Space Shuttle and Constellation Programs will also be discussed. Using these past programs as examples, the paper will detail operational, design, and analysis approaches to mitigate and balance the risks to people onboard and in the public. Crewed vehicle perspectives from the Federal Aviation Administration and Air Force organizations that oversee public safety will be summarized as well. Finally, the paper will emphasize the need to factor policy, operational, and analysis considerations into the early design trades of new vehicles to help ensure that both crew and public safety are maximized to the greatest extent possible.

International Conference on Positron Annihilation (6th) held at the University of Texas at Arlington, April 3-7, 1982. Program and Collected Abstracts.

DTIC Science & Technology

1983-02-23

Annihilation Techniques SONIA MIIAN S., R. ZANA , J.CH. ABBE, and G. DUPLATRE - xxviii P-80 Study of Microemulsion Systems by Positron Annihilation...California, Berkeley CA 94720, U.S.A. Primary considerations for the design of positron emission tomographs for medical studies in humans are high...imaging system for medical applications is to produce an image in as short as time as possible which represents as accurately Ias possible the

Aeroelastic Considerations For Rotorcraft Primary Control with On-Blade Elevons

NASA Technical Reports Server (NTRS)

Ormiston, Robert A.; Rutkowski, Michael (Technical Monitor)

2001-01-01

Replacing the helicopter rotor swashplate and blade pitch control system with on-blade elevon control surfaces for primary flight control may significantly reduce weight and drag to improve mission performance. Simplified analyses are used to examine the basic aeroelastic characteristics of such rotor blades, including pitch and flap dynamic response, elevon reversal, and elevon control effectiveness. The profile power penalty associated with deflections of elevon control surfaces buried within the blade planform is also evaluated. Results suggest that with aeroelastic design for pitch frequencies in the neighborhood of 2/rev, reasonable elevon control effectiveness may be achieved and that, together with collective pitch indexing, the aerodynamic profile power penalty of on-blade control surface deflections may be minimized.

Design consideration for a nuclear electric propulsion system

NASA Technical Reports Server (NTRS)

Phillips, W. M.; Pawlik, E. V.

1978-01-01

A study is currently underway to design a nuclear electric propulsion vehicle capable of performing detailed exploration of the outer-planets. Primary emphasis is on the power subsystem. Secondary emphasis includes integration into a spacecraft, and integration with the thrust subsystem and science package or payload. The results of several design iterations indicate an all-heat-pipe system offers greater reliability, elimination of many technology development areas and a specific weight of under 20 kg/kWe at the 400 kWe power level. The system is compatible with a single Shuttle launch and provides greater safety than could be obtained with designs using pumped liquid metal cooling. Two configurations, one with the reactor and power conversion forward on the spacecraft with the ion engines aft and the other with reactor, power conversion and ion engines aft were selected as dual baseline designs based on minimum weight, minimum required technology development and maximum growth potential and flexibility.

Conditional analysis of mixed Poisson processes with baseline counts: implications for trial design and analysis.

PubMed

Cook, Richard J; Wei, Wei

2003-07-01

The design of clinical trials is typically based on marginal comparisons of a primary response under two or more treatments. The considerable gains in efficiency afforded by models conditional on one or more baseline responses has been extensively studied for Gaussian models. The purpose of this article is to present methods for the design and analysis of clinical trials in which the response is a count or a point process, and a corresponding baseline count is available prior to randomization. The methods are based on a conditional negative binomial model for the response given the baseline count and can be used to examine the effect of introducing selection criteria on power and sample size requirements. We show that designs based on this approach are more efficient than those proposed by McMahon et al. (1994).

NASA preferred reliability-practices for design and test

NASA Technical Reports Server (NTRS)

Lisk, Ronald C.

1992-01-01

NASA HQ established the NASA R&M Steering Committee (R&MSC) comprised of membership from each NASA field center. The primary charter of the R&MSC is to obtain, record, and share the best design practices that NASA has applied to successful space flight programs and current design considerations (guidelines) that should enhance flight reliability on emerging programs. The practices and guidelines are being assembled in a living document for distribution to NASA centers and the aerospace community. The document will be updated annually with additional practices and guidelines as contributions from the centers are reviewed and approved by the R&MSC. Practices and guidelines are not requirements, but rather a means of sharing procedures and techniques that a given center and the R&MSC together feel have strong technical merit and application to the design of space-related equipment.

The Design Process of Physical Security as Applied to a U.S. Border Port of Entry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, G.G.

1999-02-22

This paper details the application of a standard physical security system design process to a US Border Port of Entry (PoE) for vehicle entry/exit. The physical security design methodology is described as well as the physical security similarities to facilities currently at a US Border PoE for vehicles. The physical security design process description includes the various elements that make up the methodologies well as the considerations that must be taken into account when dealing with system integration of those elements. The distinctions between preventing unlawful entry/exit of illegal contraband and personnel are described. The potential to enhance the functionsmore » of drug/contraband detection in the Pre-Primary Inspection area through the application of emerging technologies are also addressed.« less

Model-based design and experimental verification of a monitoring concept for an active-active electromechanical aileron actuation system

NASA Astrophysics Data System (ADS)

Arriola, David; Thielecke, Frank

2017-09-01

Electromechanical actuators have become a key technology for the onset of power-by-wire flight control systems in the next generation of commercial aircraft. The design of robust control and monitoring functions for these devices capable to mitigate the effects of safety-critical faults is essential in order to achieve the required level of fault tolerance. A primary flight control system comprising two electromechanical actuators nominally operating in active-active mode is considered. A set of five signal-based monitoring functions are designed using a detailed model of the system under consideration which includes non-linear parasitic effects, measurement and data acquisition effects, and actuator faults. Robust detection thresholds are determined based on the analysis of parametric and input uncertainties. The designed monitoring functions are verified experimentally and by simulation through the injection of faults in the validated model and in a test-rig suited to the actuation system under consideration, respectively. They guarantee a robust and efficient fault detection and isolation with a low risk of false alarms, additionally enabling the correct reconfiguration of the system for an enhanced operational availability. In 98% of the performed experiments and simulations, the correct faults were detected and confirmed within the time objectives set.

Flow Accelerated Erosion-Corrosion (FAC) considerations for secondary side piping in the AP1000{sup R} nuclear power plant design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vanderhoff, J. F.; Rao, G. V.; Stein, A.

2012-07-01

The issue of Flow Accelerated Erosion-Corrosion (FAC) in power plant piping is a known phenomenon that has resulted in material replacements and plant accidents in operating power plants. Therefore, it is important for FAC resistance to be considered in the design of new nuclear power plants. This paper describes the design considerations related to FAC that were used to develop a safe and robust AP1000{sup R} plant secondary side piping design. The primary FAC influencing factors include: - Fluid Temperature - Pipe Geometry/layout - Fluid Chemistry - Fluid Velocity - Pipe Material Composition - Moisture Content (in steam lines) Duemore » to the unknowns related to the relative impact of the influencing factors and the complexities of the interactions between these factors, it is difficult to accurately predict the expected wear rate in a given piping segment in a new plant. This paper provides: - a description of FAC and the factors that influence the FAC degradation rate, - an assessment of the level of FAC resistance of AP1000{sup R} secondary side system piping, - an explanation of options to increase FAC resistance and associated benefits/cost, - discussion of development of a tool for predicting FAC degradation rate in new nuclear power plants. (authors)« less

[Factors conditioning primary care services utilization. Empirical evidence and methodological inconsistencies].

PubMed

Sáez, M

2003-01-01

In Spain, the degree and characteristics of primary care services utilization have been the subject of analysis since at least the 1980s. One of the main reasons for this interest is to assess the extent to which utilization matches primary care needs. In fact, the provision of an adequate health service for those who most need it is a generally accepted priority. The evidence shows that individual characteristics, mainly health status, are the factors most closely related to primary care utilization. Other personal characteristics, such as gender and age, could act as modulators of health care need. Some family and/or cultural variables, as well as factors related to the health care professional and institutions, could explain some of the observed variability in primary care services utilization. Socioeconomic variables, such as income, reveal a paradox. From an aggregate perspective, income is the main determinant of utilization as well as of health care expenditure. When data are analyzed for individuals, however, income is not related to primary health utilization. The situation is controversial, with methodological implications and, above all, consequences for the assessment of the efficiency in primary care utilization. Review of the literature reveals certain methodological inconsistencies that could at least partly explain the disparity of the empirical results. Among others, the following flaws can be highlighted: design problems, measurement errors, misspecification, and misleading statistical methods.Some solutions, among others, are quasi-experiments, the use of large administrative databases and of primary data sources (design problems); differentiation between types of utilization and between units of analysis other than consultations, and correction of measurement errors in the explanatory variables (measurement errors); consideration of relevant explanatory variables (misspecification); and the use of multilevel models (statistical methods).

The Proximal and Distal Femoral Canal Geometry Influences Cementless Stem Anchorage and Revision Hip and Knee Implant Stability.

PubMed

Heinecke, Markus; Rathje, Fabian; Layher, Frank; Matziolis, Georg

2018-05-01

Although cementless revision arthroplasty of the hip has become the gold standard, revision arthroplasty of the distal femur is controversial. This study evaluated the anchoring principles of different femoral revision stem designs in extended bone defect situations, taking into account the anatomical conditions of the proximal and distal femur, and the resulting primary stability. Cementless press-fit stems of 4 different designs were implanted in synthetic femurs. The specimens were analyzed by computed tomography and were tested considering axial/torsional stiffness and migration resistance. Different stem designs anchored in different femoral canal geometries achieved comparable primary stability. Despite considerably different anchorage lengths, no difference in migration behavior or stiffness was found. Both in the distal femur and in the proximal femur, the conical stems showed a combination of conical and 3-point anchorage. Regarding the cylindrical stem tested, a much shorter anchorage length was sufficient in the distal femur to achieve comparable primary stability. In the investigated osseous defect model, the stem design (conical vs cylindrical), not the geometry of the femoral canal (proximal vs distal), was decisive regarding the circumferential anchorage length. For the conical stems, it can be postulated that there are reserves available for achieving a conical-circular fixation as a result of the large contact length. For the cylindrical stems, only a small reserve for a stable anchorage can be assumed. [Orthopedics. 2018; 41(3):e369-e375.]. Copyright 2018, SLACK Incorporated.

The role of population monitoring in the management of North American waterfowl

USGS Publications Warehouse

Nichols, J.D.; Williams, B.K.; Johnson, F.A.

2000-01-01

Despite the effort and expense devoted to large-scale monitoring programs, few existing programs have been designed with specific objectives in mind and few permit strong inferences about the dynamics of monitored systems. The waterfowl population monitoring programs of the U.S. Fish and Wildlife Service, Canadian Wildlife Service and state and provincial agencies provide a nice example with respect to program objectives, design and implementation. The May Breeding Grounds Survey provides an estimate of system state (population size) that serves two primary purposes in the adaptive management process: identifying the appropriate time-specific management actions and updating the information state (model weights) by providing a basis for evaluating predictions of competing models. Other waterfowl monitoring programs (e.g., banding program, hunter questionnaire survey, parts collection survey, winter survey) provide estimates of vital rates (rates of survival, reproduction and movement) associated with system dynamics and variables associated with management objectives (e.g., harvest). The reliability of estimates resulting from monitoring programs depends strongly on whether considerations about spatial variation and detection probability have been adequately incorporated into program design and implementation. Certain waterfowl surveys again provide nice examples of monitoring programs that incorporate these considerations.

Propulsion Airframe Aeroacoustics Technology Evaluation and Selection Using a Multi-Attribute Decision Making Process and Non-Deterministic Design

NASA Technical Reports Server (NTRS)

Burg, Cecile M.; Hill, Geoffrey A.; Brown, Sherilyn A.; Geiselhart, Karl A.

2004-01-01

The Systems Analysis Branch at NASA Langley Research Center has investigated revolutionary Propulsion Airframe Aeroacoustics (PAA) technologies and configurations for a Blended-Wing-Body (BWB) type aircraft as part of its research for NASA s Quiet Aircraft Technology (QAT) Project. Within the context of the long-term NASA goal of reducing the perceived aircraft noise level by a factor of 4 relative to 1997 state of the art, major configuration changes in the propulsion airframe integration system were explored with noise as a primary design consideration. An initial down-select and assessment of candidate PAA technologies for the BWB was performed using a Multi-Attribute Decision Making (MADM) process consisting of organized brainstorming and decision-making tools. The assessments focused on what effect the PAA technologies had on both the overall noise level of the BWB and what effect they had on other major design considerations such as weight, performance and cost. A probabilistic systems analysis of the PAA configurations that presented the best noise reductions with the least negative impact on the system was then performed. Detailed results from the MADM study and the probabilistic systems analysis will be published in the near future.

Analysis of the effects of simulated synergistic LEO environment on solar panels

NASA Astrophysics Data System (ADS)

Allegri, G.; Corradi, S.; Marchetti, M.; Scaglione, S.

2007-02-01

The effects due to the LEO environment exposure of a solar array primary structure are here presented and discussed in detail. The synergistic damaging components featuring LEO environment are high vacuum, thermal cycling, neutral gas, ultraviolet (UV) radiation and cold plasma. The synergistic effects due to these environmental elements are simulated by "on ground" tests, performed in the Space Environment Simulator (SAS) at the University of Rome "La Sapienza"; numerical simulations are performed by the Space Environment Information System (SPENVIS), developed by the European Space Agency (ESA). A "safe life" design for a solar array primary structure is developed, taking into consideration the combined damaging action of the LEO environment components; therefore results from both numerical and experimental simulations are coupled within the framework of a standard finite element method (FEM) based design. The expected durability of the solar array primary structure, made of laminated sandwich composite, is evaluated assuming that the loads exerted on the structure itself are essentially dependent on thermo-elastic stresses. The optical degradation of surface materials and the stiffness and strength degradation of structural elements are taken into account to assess the global structural durability of the solar array under characteristic operative conditions in LEO environment.

Project Columbiad: Mission to the Moon. Book 2, volume 3: Stage configuration designs; volume 4: Program plan

NASA Technical Reports Server (NTRS)

1992-01-01

The Earth Orbital Rendezvous (EOR) configuration for the piloted mission is composed of three propulsive elements in addition to the Crew Module (CM): Primary Trans-Lunar Injection (PTLI), Lunar Braking Module (LBM), and Earth Return Module (ERM). The precursor mission is also composed of three propulsive elements in addition to its surface payloads: PTLI, LBM and the Payload Landing Module (PLM). Refer to Volume 1, Section 5.1 and 5.2 for a break-up of the different stages into the four launches. A quick summary is as follows: PTLI is on Launch 1 and 3 while the LBM, PLM, and surface payloads are on Launch 2 and another LBM, ERM, and CM on Launch 4. The precursor mission is designed to be as modular as possible with the piloted mission for developmental cost considerations. The following topics are discussed: launch vehicle description; primary trans-lunar injection stage; lunar braking module; earth return module; crew module; payload landing module; and surface payload description.

Considerations for the nonclinical safety evaluation of antibody drug conjugates for oncology.

PubMed

Roberts, Stanley A; Andrews, Paul A; Blanset, Diann; Flagella, Kelly M; Gorovits, Boris; Lynch, Carmel M; Martin, Pauline L; Kramer-Stickland, Kimberly; Thibault, Stephane; Warner, Garvin

2013-12-01

Antibody drug conjugates (ADCs) include monoclonal antibodies that are linked to cytotoxic small molecules. A number of these agents are currently being developed as anti-cancer agents designed to improve the therapeutic index of the cytotoxin (i.e., cytotoxic small molecule or cytotoxic agent) by specifically delivering it to tumor cells. This paper presents primary considerations for the nonclinical safety evaluation of ADCs and includes strategies for the evaluation of the entire ADC or the various individual components (i.e., antibody, linker or the cytotoxin). Considerations are presented on how to design a nonclinical safety assessment program to identify the on- and off-target toxicities to enable first-in-human (FIH) studies. Specific discussions are also included that provide details as to the need and how to conduct the studies for evaluating ADCs in genetic toxicology, tissue cross-reactivity, safety pharmacology, carcinogenicity, developmental and reproductive toxicology, biotransformation, toxicokinetic monitoring, bioanalytical assays, immunogenicity testing, test article stability and the selection of the FIH dose. Given the complexity of these molecules and our evolving understanding of their properties, there is no single all-encompassing nonclinical strategy. Instead, each ADC should be evaluated on a case-by-case scientifically-based approach that is consistent with ICH and animal research guidelines. Copyright © 2013 Elsevier Inc. All rights reserved.

NASA advanced aeronautics design solar powered remotely piloted vehicle

NASA Technical Reports Server (NTRS)

Elario, David S.; Guillmette, Neal H.; Lind, Gregory S.; Webster, Jonathan D.; Ferreira, Michael J.; Konstantakis, George C.; Marshall, David L.; Windt, Cari L.

1991-01-01

Environmental problems such as the depletion of the ozone layer and air pollution demand a change in traditional means of propulsion that is sensitive to the ecology. Solar powered propulsion is a favorable alternative that is both ecologically harmless as well as cost effective. Integration of solar energy into designs ranging from futuristic vehicles to heating is beneficial to society. The design and construction of a Multi-Purpose Remotely Piloted Vehicle (MPRPV) seeks to verify the feasibility of utilizing solar propulsion as a primary fuel source. This task has been a year long effort by a group of ten students, divided into five teams, each dealing with different aspects of the design. The aircraft was designed to take-off, climb to the design altitude, fly in a sustained figure-eight flight path, and cruise for approximately one hour. This mission requires flight at Reynolds numbers between 150,000 and 200,000 and demands special considerations in the aerodynamic design in order to achieve flight in this regime. Optimal performance requires a light weight configuration with both structural integrity and maximum power availability. The structure design and choice of solar cells for the propulsion was governed by the weight, efficiency, and cost considerations. The final design is a MPRPV weighting 35 N which cruises 7 m/s at the design altitude of 50 m. The configuration includes a wing composed of balsa and foam NACA 6409 airfoil sections and carbon fiber spars, a tail of similar construction, and a truss structure fuselage. The propulsion system consists of 98 10 percent efficient solar cells donated by Mobil Solar, a NiCad battery for energy storage, and a folding propeller regulated by a lightweight and efficient control system. The airfoils and propeller chosen for the design were research and tested during the design process.

Process Feasibility Study in Support of Silicon Material, Task 1

NASA Technical Reports Server (NTRS)

Li, K. Y.; Hansen, K. C.; Yaws, C. L.

1979-01-01

During this reporting period, major activies were devoted to process system properties, chemical engineering and economic analyses. Analyses of process system properties was continued for materials involved in the alternate processes under consideration for solar cell grade silicon. The following property data are reported for silicon tetrafluoride: critical constants, vapor pressure, heat of varporization, heat capacity, density, surface tension, viscosity, thermal conductivity, heat of formation and Gibb's free energy of formation. Chemical engineering analysis of the BCL process was continued with primary efforts being devoted to the preliminary process design. Status and progress are reported for base case conditions; process flow diagram; reaction chemistry; material and energy balances; and major process equipment design.

Weight optimization of ultra large space structures

NASA Technical Reports Server (NTRS)

Reinert, R. P.

1979-01-01

The paper describes the optimization of a solar power satellite structure for minimum mass and system cost. The solar power satellite is an ultra large low frequency and lightly damped space structure; derivation of its structural design requirements required accommodation of gravity gradient torques which impose primary loads, life up to 100 years in the rigorous geosynchronous orbit radiation environment, and prevention of continuous wave motion in a solar array blanket suspended from a huge, lightly damped structure subject to periodic excitations. The satellite structural design required a parametric study of structural configurations and consideration of the fabrication and assembly techniques, which resulted in a final structure which met all requirements at a structural mass fraction of 10%.

Basic materials and structures aspects for hypersonic transport vehicles (HTV)

NASA Astrophysics Data System (ADS)

Steinheil, E.; Uhse, W.

A Mach 5 transport design is used to illustrate structural concepts and criteria for materials selections and also key technologies that must be followed in the areas of computational methods, materials and construction methods. Aside from the primary criteria of low weight, low costs, and conceivable risks, a number of additional requirements must be met, including stiffness and strength, corrosion resistance, durability, and a construction adequate for inspection, maintenance and repair. Current aircraft construction requirements are significantly extended for hypersonic vehicles. Additional consideration is given to long-duration temperature resistance of the airframe structure, the integration of large-volume cryogenic fuel tanks, computational tools, structural design, polymer matrix composites, and advanced manufacturing technologies.

A design approach and selected wind tunnel results at high subsonic speeds for wing-tip mounted winglets

NASA Technical Reports Server (NTRS)

Whitcomb, R. T.

1976-01-01

Winglets, which are small, nearly vertical, winglike surfaces, substantially reduce drag coefficients at lifting conditions. The primary winglet surfaces are rearward above the wing tips; secondary surfaces are forward below the wing tips. This report presents a discussion of the considerations involved in the design of the winglets; measured effects of these surfaces on the aerodynamic forces, moments, and loads for a representative first generation, narrow body jet transport wing; and a comparison of these effects with those for a wing tip extension which results in approximately the same increase in bending moment at the wing-fuselage juncture as did the addition of the winglets.

Bilevel formulation of a policy design problem considering multiple objectives and incomplete preferences

NASA Astrophysics Data System (ADS)

Hawthorne, Bryant; Panchal, Jitesh H.

2014-07-01

A bilevel optimization formulation of policy design problems considering multiple objectives and incomplete preferences of the stakeholders is presented. The formulation is presented for Feed-in-Tariff (FIT) policy design for decentralized energy infrastructure. The upper-level problem is the policy designer's problem and the lower-level problem is a Nash equilibrium problem resulting from market interactions. The policy designer has two objectives: maximizing the quantity of energy generated and minimizing policy cost. The stakeholders decide on quantities while maximizing net present value and minimizing capital investment. The Nash equilibrium problem in the presence of incomplete preferences is formulated as a stochastic linear complementarity problem and solved using expected value formulation, expected residual minimization formulation, and the Monte Carlo technique. The primary contributions in this article are the mathematical formulation of the FIT policy, the extension of computational policy design problems to multiple objectives, and the consideration of incomplete preferences of stakeholders for policy design problems.

Solar powered multipurpose remotely powered aircraft

NASA Technical Reports Server (NTRS)

1991-01-01

Environmental problems such as the depletion of the ozone layer and air pollution demand a change in traditional means of propulsion that is sensitive to the ecology. Solar-powered propulsion is a favorable alternative that is both ecologically harmless as well as cost effective. Integration of solar energy into designs ranging from futuristic vehicles to heating is, therefore, beneficial to society. The design and construction of a Multipurpose Remotely Piloted Vehicle (MPRPV) seeks to verify the feasibility of using solar propulsion as a primary fuel source. This task has been a year-long effort by a group of eight students, divided into four teams, each dealing with different aspects of the design. The aircraft was designed to take off, climb to the design altitude, fly in a sustained figure-eight flight path, and cruise for approximately one hour. This mission requires flight at Reynolds numbers between 150,000 and 200,000 and demands special considerations in the aerodynamic design to achieve flight in this regime. Optimal performance requires a lightweight configuration with both structural integrity and maximum power availability. The structural design and choice of solar cells for the propulsion were governed by weight, efficiency, and cost considerations. The final design is an MPRPV weighing 35 N that cruises at 7 m/s at the design altitude of 50 m. The configuration includes a wing composed of balsa and foam NACA 6409 airfoil sections and carbon fiber spars, a tail of similar construction, and a truss structure fuselage. The propulsion system consists of 98 12.5 percent-efficient solar cells donated by Mobil Solar, a NiCad battery for energy storage, and a folding propeller regulated by a lightweight and efficient control system. The airfoils and propeller chosen for the design were researched and tested during the design process.

A robust design mark-resight abundance estimator allowing heterogeneity in resighting probabilities

USGS Publications Warehouse

McClintock, B.T.; White, Gary C.; Burnham, K.P.

2006-01-01

This article introduces the beta-binomial estimator (BBE), a closed-population abundance mark-resight model combining the favorable qualities of maximum likelihood theory and the allowance of individual heterogeneity in sighting probability (p). The model may be parameterized for a robust sampling design consisting of multiple primary sampling occasions where closure need not be met between primary occasions. We applied the model to brown bear data from three study areas in Alaska and compared its performance to the joint hypergeometric estimator (JHE) and Bowden's estimator (BOWE). BBE estimates suggest heterogeneity levels were non-negligible and discourage the use of JHE for these data. Compared to JHE and BOWE, confidence intervals were considerably shorter for the AICc model-averaged BBE. To evaluate the properties of BBE relative to JHE and BOWE when sample sizes are small, simulations were performed with data from three primary occasions generated under both individual heterogeneity and temporal variation in p. All models remained consistent regardless of levels of variation in p. In terms of precision, the AICc model-averaged BBE showed advantages over JHE and BOWE when heterogeneity was present and mean sighting probabilities were similar between primary occasions. Based on the conditions examined, BBE is a reliable alternative to JHE or BOWE and provides a framework for further advances in mark-resight abundance estimation. ?? 2006 American Statistical Association and the International Biometric Society.

Lunar base mission technology issues and orbital demonstration requirements on space station

NASA Technical Reports Server (NTRS)

Llewellyn, Charles P.; Weidman, Deene J.

1992-01-01

The International Space Station has been the object of considerable design, redesign, and alteration since it was originally proposed in early 1984. In the intervening years the station has slowly evolved to a specific design that was thoroughly reviewed by a large agency-wide Critical Evaluation Task Force (CETF). As space station designs continue to evolve, studies must be conducted to determine the suitability of the current design for some of the primary purposes for which the station will be used. This paper concentrates on the technology requirements and issues, the on-orbit demonstration and verification program, and the space station focused support required prior to the establishment of a permanently manned lunar base as identified in the National Commission on Space report. Technology issues associated with the on-orbit assembly and processing of the lunar vehicle flight elements are also discussed.

X-57 Power and Command System Design

NASA Technical Reports Server (NTRS)

Clarke, Sean; Redifer, Matthew; Papathakis, Kurt; Samuel, Aamod; Foster, Trevor

2017-01-01

This paper describes the power and command system architecture of the X-57 Maxwell flight demonstrator aircraft. The X-57 is an experimental aircraft designed to demonstrate radically improved aircraft efficiency with a 3.5 times aero-propulsive efficiency gain at a "high-speed cruise" flight condition for comparable general aviation aircraft. These gains are enabled by integrating the design of a new, optimized wing and a new electric propulsion system. As a result, the X-57 vehicle takes advantage of the new capabilities afforded by electric motors as primary propulsors. Integrating new technologies into critical systems in experimental aircraft poses unique challenges that require careful design considerations across the entire vehicle system, such as qualification of new propulsors (motors, in the case of the X-57 aircraft), compatibility of existing systems with a new electric power distribution bus, and instrumentation and monitoring of newly qualified propulsion system devices.

A cyclic ground test of an ion auxiliary propulsion system: Description and operational considerations

NASA Technical Reports Server (NTRS)

Ling, Jerri S.; Kramer, Edward H.

1988-01-01

The Ion Auxiliary Propulsion System (IAPS) experiment is designed for launch on an Air Force Space Test Program satellite (NASA-TM-78859; AIAA Paper No. 78-647). The primary objective of the experiment is to flight qualify the 8 cm mercury ion thruster system for stationkeeping applications. Secondary objectives are measuring the interactions between operating ion thruster systems and host spacecraft, and confirming the design performance of the thruster systems. Two complete 8 cm mercury ion thruster subsystems will be flown. One of these will be operated for 2557 on and off cycles and 7057 hours at full thrust. Tests are currently under way in support of the IAPS flight experiment. In this test an IAPS thruster is being operated through a series of startup/run/shut-down cycles which simulate thruster operation during the planned flight experiment. A test facility description and operational considerations of this testing using an engineering model 8 cm thruster (S/N 905) is the subject of this paper. Final results will be published at a later date when the ground test has been concluded.

Comparison of Aedes aegypti (Diptera: Culicidae) resting behavior on two fabric types under consideration for insecticide treatment in a push-pull strategy.

PubMed

Tainchum, Krajana; Polsomboon, Suppaluck; Grieco, John P; Suwonkerd, Wannapa; Prabaripai, Atchariya; Sungvornyothin, Sungsit; Chareonviriyaphap, Theeraphap; Achee, Nicole L

2013-01-01

Aedes aegypti (L.), the primary vector of dengue and dengue hemorrhagic fever, breeds and rests predominately inside human dwellings. With no current vaccine available, vector control remains the mainstay for dengue management and novel approaches continue to be needed to reduce virus transmission. This requires a full understanding of Ae. aegypti ecology to design effective strategies. One novel approach is the use of contact irritants at target resting sites inside homes to make the surface unacceptable and cause vectors to escape before biting. The objective of the current study was to observe indoor resting behavior patterns of female Ae. aegypti within experimental huts in response to two fabrics under consideration for insecticide treatment: cotton and polyester. Results indicate that fabric type, coverage ratio of dark to light fabric and placement configuration (vertical vs. horizontal) all influenced the resting pattern of mosquito cohorts. Findings from this study will guide evaluations of a push-pull strategy designed to exploit contact irritant behaviors and drive Ae. aegypti out of homes prefeeding.

Quasi-experimental study designs series-paper 9: collecting data from quasi-experimental studies.

PubMed

Aloe, Ariel M; Becker, Betsy Jane; Duvendack, Maren; Valentine, Jeffrey C; Shemilt, Ian; Waddington, Hugh

2017-09-01

To identify variables that must be coded when synthesizing primary studies that use quasi-experimental designs. All quasi-experimental (QE) designs. When designing a systematic review of QE studies, potential sources of heterogeneity-both theory-based and methodological-must be identified. We outline key components of inclusion criteria for syntheses of quasi-experimental studies. We provide recommendations for coding content-relevant and methodological variables and outlined the distinction between bivariate effect sizes and partial (i.e., adjusted) effect sizes. Designs used and controls used are viewed as of greatest importance. Potential sources of bias and confounding are also addressed. Careful consideration must be given to inclusion criteria and the coding of theoretical and methodological variables during the design phase of a synthesis of quasi-experimental studies. The success of the meta-regression analysis relies on the data available to the meta-analyst. Omission of critical moderator variables (i.e., effect modifiers) will undermine the conclusions of a meta-analysis. Copyright © 2017 Elsevier Inc. All rights reserved.

A near miss: the importance of context in a public health informatics project in a New Zealand case study.

PubMed

Wells, Stewart; Bullen, Chris

2008-01-01

This article describes the near failure of an information technology (IT) system designed to support a government-funded, primary care-based hepatitis B screening program in New Zealand. Qualitative methods were used to collect data and construct an explanatory model. Multiple incorrect assumptions were made about participants, primary care workflows and IT capacity, software vendor user knowledge, and the health IT infrastructure. Political factors delayed system development and it was implemented untested, almost failing. An intensive rescue strategy included system modifications, relaxation of data validity rules, close engagement with software vendors, and provision of intensive on-site user support. This case study demonstrates that consideration of the social, political, technological, and health care contexts is important for successful implementation of public health informatics projects.

Analysis of retinal and cortical components of Retinex algorithms

NASA Astrophysics Data System (ADS)

Yeonan-Kim, Jihyun; Bertalmío, Marcelo

2017-05-01

Following Land and McCann's first proposal of the Retinex theory, numerous Retinex algorithms that differ considerably both algorithmically and functionally have been developed. We clarify the relationships among various Retinex families by associating their spatial processing structures to the neural organizations in the retina and the primary visual cortex in the brain. Some of the Retinex algorithms have a retina-like processing structure (Land's designator idea and NASA Retinex), and some show a close connection with the cortical structures in the primary visual area of the brain (two-dimensional L&M Retinex). A third group of Retinexes (the variational Retinex) manifests an explicit algorithmic relation to Wilson-Cowan's physiological model. We intend to overview these three groups of Retinexes with the frame of reference in the biological visual mechanisms.

Antiproton Production by CR on Air Nuclei

NASA Technical Reports Server (NTRS)

Maskalenko, I. V.; Mashnik, S. G.

2003-01-01

Recent measurements of the cosmic ray (CR) antiproton flux have been shown to challenge existing CR propagation models. In particular, the conventional reacceleration model designed to match secondary/primary nuclei ratios produces too few antiprotons. Recently there appear some indications that the atmospheric contribution to antiproton production is considerably underestimated, which implies that antiproton CR flux might be lower. This may be the primary reason of the discrepancy discovered in CR propagation. We use the Los Alamos version of the Quark-Gluon String Model code LAQGSM together with available data on antiproton production on nuclei to analyse the accuracy of existing parameterizations of antiproton production cross section. The LAQGSM model has been shown to reproduce well nuclear reactions and hadronic data in the range 0.01-800 GeV/nucleon.

Immediate vs. delayed insertion of intrauterine contraception after second trimester abortion: study protocol for a randomized controlled trial

PubMed Central

2011-01-01

Background We describe the rationale and protocol for a randomized controlled trial (RCT) to assess whether intrauterine contraception placed immediately after a second trimester abortion will result in fewer pregnancies than current recommended practice of intended placement at 4 weeks post-abortion. Decision analysis suggests the novel strategy could substantially reduce subsequent unintended pregnancies and abortions. This paper highlights considerations of design, implementation and evaluation of a trial expected to provide rigorous evidence for appropriate insertion timing and health economics of intrauterine contraception after second trimester abortion. Methods/Design Consenting women choosing to use intrauterine contraception after abortion for a pregnancy of 12 to 24 weeks will be randomized to insertion timing groups either immediately (experimental intervention) or four weeks (recommended care) post abortion. Primary outcome measure is pregnancy rate at one year. Secondary outcomes include: cumulative pregnancy rates over five year follow-up period, comprehensive health economic analyses comparing immediate and delayed insertion groups, and device retention rates, complication rates (infection, expulsion) and, contraceptive method satisfaction. Web-based Contraception Satisfaction Questionnaires, clinical records and British Columbia linked health databases will be used to assess primary and secondary outcomes. Enrolment at all clinics in the province performing second trimester abortions began in May 2010 and is expected to complete in late 2011. Data on one year outcomes will be available for analysis in 2014. Discussion The RCT design combined with access to clinical records at all provincial abortion clinics, and to information in provincial single-payer linked administrative health databases, birth registry and hospital records, offers a unique opportunity to evaluate such an approach by determining pregnancy rate at one through five years among enrolled women. We highlight considerations of design, implementation and evaluation of a trial expected to provide rigorous evidence for appropriate insertion timing and health economics of intrauterine contraception after second trimester abortion. Trial registration Current Controlled Trials ISRCTN19506752 PMID:21672213

Static Structural Analysis of a Variable Span Morphing Wing for Unmanned Aerial Vehicle

NASA Astrophysics Data System (ADS)

Bashir, M.; Rajendran, P.

2018-05-01

While the primary reason to develop an adaptive wing is the aerodynamic benefits, the primary hindrance is the structural and vibrational considerations due to the unsteady nature of the airflow during the flight. Hence this study forms an important part of the morphable wing technology. In this paper, the design of a moderate aspect ratio variable span wing will be performed. The morphing wing is modeled structurally to observe the effect of spanwise load distribution on the wing structure. For the structural design and analysis of the unmanned aerial vehicle (UAV) under this study, commercial software Solidworks and Ansys/Static Structural/Modal are used. The static structural analyses of the wing are performed under different load conditions. The results of these analyses show that the designed structure is safe within the flight envelope. It is observed that the wing-root bending moment increases drastically due to an increase in the wingspan. Thus, the bending moment along the wingspan of the morphing wing is much larger than that of the conventional wing which results in an increase in the deflection of the free-end. The maximum stress for the un-extended wing configuration increases for the extended wing configuration.

Methodologic considerations in the design and analysis of nested case-control studies: association between cytokines and postoperative delirium.

PubMed

Ngo, Long H; Inouye, Sharon K; Jones, Richard N; Travison, Thomas G; Libermann, Towia A; Dillon, Simon T; Kuchel, George A; Vasunilashorn, Sarinnapha M; Alsop, David C; Marcantonio, Edward R

2017-06-06

The nested case-control study (NCC) design within a prospective cohort study is used when outcome data are available for all subjects, but the exposure of interest has not been collected, and is difficult or prohibitively expensive to obtain for all subjects. A NCC analysis with good matching procedures yields estimates that are as efficient and unbiased as estimates from the full cohort study. We present methodological considerations in a matched NCC design and analysis, which include the choice of match algorithms, analysis methods to evaluate the association of exposures of interest with outcomes, and consideration of overmatching. Matched, NCC design within a longitudinal observational prospective cohort study in the setting of two academic hospitals. Study participants are patients aged over 70 years who underwent scheduled major non-cardiac surgery. The primary outcome was postoperative delirium from in-hospital interviews and medical record review. The main exposure was IL-6 concentration (pg/ml) from blood sampled at three time points before delirium occurred. We used nonparametric signed ranked test to test for the median of the paired differences. We used conditional logistic regression to model the risk of IL-6 on delirium incidence. Simulation was used to generate a sample of cohort data on which unconditional multivariable logistic regression was used, and the results were compared to those of the conditional logistic regression. Partial R-square was used to assess the level of overmatching. We found that the optimal match algorithm yielded more matched pairs than the greedy algorithm. The choice of analytic strategy-whether to consider measured cytokine levels as the predictor or outcome-- yielded inferences that have different clinical interpretations but similar levels of statistical significance. Estimation results from NCC design using conditional logistic regression, and from simulated cohort design using unconditional logistic regression, were similar. We found minimal evidence for overmatching. Using a matched NCC approach introduces methodological challenges into the study design and data analysis. Nonetheless, with careful selection of the match algorithm, match factors, and analysis methods, this design is cost effective and, for our study, yields estimates that are similar to those from a prospective cohort study design.

Childhood Enuresis: Current Diagnostic Formulations, Salient Findings, and Effective Treatment Modalities.

PubMed

Thurber, Steven

2017-06-01

Enuresis constitutes a frequently encountered problem area for children that may adversely affect social and emotional adjustment. This type of incontinence has been of concern to the human family for centuries. A brief history of enuresis is presented followed by current conceptualizations, diagnostic criteria, prevalence rates and psychiatric comorbidities. Historic notions of causation together with ineffective, sometimes barbaric treatments are then discussed, ending with a presentation of evidence-based treatment modalities, with the urine alarm being an essential element of effective treatment. An intervention termed dry bed training combines the urine alarm with a series of procedures designed in part to reduce relapse potential and should be a primary consideration for implementation by treatment professionals. Finally, a brief case study is presented illustrating special etiological and treatment considerations with juvenile psychiatric patients. Copyright © 2016 Elsevier Inc. All rights reserved.

Considerations of Dance Transmission Processes: Adapting Bharata Natyam in a Singapore Primary School

ERIC Educational Resources Information Center

Lum, Chee Hoo; Gonda, Donn Emmanuel

2014-01-01

This qualitative case study has, for its purpose, an examination of the pedagogies and practices of a master Bharata Natyam dance instructor working within a Singapore primary school context. It explores the instructor's adaptation within an after-school weekly activity of the South Indian traditional classical dance form. Considerations of dance…

System safety in Stirling engine development

NASA Technical Reports Server (NTRS)

Bankaitis, H.

1981-01-01

The DOE/NASA Stirling Engine Project Office has required that contractors make safety considerations an integral part of all phases of the Stirling engine development program. As an integral part of each engine design subtask, analyses are evolved to determine possible modes of failure. The accepted system safety analysis techniques (Fault Tree, FMEA, Hazards Analysis, etc.) are applied in various degrees of extent at the system, subsystem and component levels. The primary objectives are to identify critical failure areas, to enable removal of susceptibility to such failures or their effects from the system and to minimize risk.

Translating Research on Healthy Lifestyles for Children: Meeting the Needs of Diverse Populations

PubMed Central

Kennedy, Christine; Floriani, Victoria

2008-01-01

Synopsis This paper provides two examples of approaches nursing can take to reach diverse populations of children and their families to enhance health lifestyles. First a descriptive summary of a brief after-school intervention program aimed at influencing 8 and 9 year-old children’s media habits and the prevention of negative health behaviors will be presented. Design consideration for translating health lifestyles research findings into a Nurse managed inner city primary care practice will be reviewed in the 2nd example. PMID:18674672

Japan's launch vehicle program update

NASA Astrophysics Data System (ADS)

Tadakawa, Tsuguo

1987-06-01

NASDA is actively engaged in the development of H-I and H-II launch vehicle performance capabilities in anticipation of future mission requirements. The H-I has both two-stage and three-stage versions for medium-altitude and geosynchronous orbits, respectively; the restart capability of the second stage affords considerable mission planning flexibility. The H-II vehicle is a two-stage liquid rocket primary propulsion design employing two solid rocket boosters for secondary power; it is capable of launching two-ton satellites into geosynchronous orbit, and reduces manufacture and launch costs by extensively employing off-the-shelf technology.

Coffee-can-sized spacecraft

NASA Technical Reports Server (NTRS)

Jones, Ross M.

1988-01-01

The current status and potential scientific applications of intelligent 1-5-kg projectiles being developed by SDIO and DARPA for military missions are discussed. The importance of advanced microelectronics for such small spacecraft is stressed, and it is pointed out that both chemical rockets and EM launchers are currently under consideration for these lightweight exoatmospheric projectiles (LEAPs). Long-duration power supply is identified as the primary technological change required if LEAPs are to be used for interplanetary scientific missions, and the design concept of a solar-powered space-based railgun to accelerate LEAPs on such missions is considered.

Anthropometric evaluation and recommendation for primary schools classroom furniture design in Perlis

NASA Astrophysics Data System (ADS)

Shan, Lim Shaiu; Jing, Ewe Hui; Effendi, M. S. M.; Rosli, Muhamad Farizuan

2017-09-01

This study was carried out with the objective to obtain the anthropometric data of primary school children from Year 1 to Year 6 and evaluate the children's anthropometry with the current dimensions of classroom furniture (i.e. chair and table). In addition, this study also proposed the design dimensions for the improvement in classroom furniture design with the consideration of children's anthropometric data. A total of 390 children selected from 13 primary schools in Perlis, Malaysia were participated in this study. There were 11 anthropometric measurements of children have been measured in this study, which include stature (St), popliteal height (PH), knee height (KH), thigh thickness (TT), buttock popliteal length (BPL), hip breadth (HB), sitting shoulder height (SSH), sitting elbow height (SEH), forearm-hand length (FHL), height of lumbar point (HLP) and buttock clearance (BC). Besides that, 7 dimensions relating to current classroom chair have been measured, such as seat height (SH), seat depth (SD), seat width (SW), upper edge of backrest (UEB), lower edge of backrest (LEB), S point (SP), overall chair height (OCH). Another 5 dimensions of the existing classroom table have been measured too, which involve table height (TH), table depth (TD), table width (TW), under table height (UH) and seat to table clearance (STC). All the measurements were performed by using metal measuring tape. The anthropometric data of the children were analyzed with the help of Microsoft Excel 2013. Several equations with associated with the anthropometric data and furniture dimensions have been applied in this research. The new design dimensions for classroom furniture that proposed in this paper which based on the collected anthropometric data can be referred as a guideline for classroom furniture design. The implementation of these data may help to create comfortability, safety, suitability and improve performance of children in the classroom.

Highly Loaded Composite Strut Test Results

NASA Technical Reports Server (NTRS)

Wu, K. C.; Jegley, Dawn C.; Barnard, Ansley; Phelps, James E.; McKeney, Martin J.

2011-01-01

Highly loaded composite struts from a proposed truss-based Altair lunar lander descent stage concept were selected for development under NASA's Advanced Composites Technology program. Predicted compressive member forces during launch and ascent of over -100,000 lbs were much greater than the tensile loads. Therefore, compressive failure modes, including structural stability, were primary design considerations. NASA's industry partner designed and built highly loaded struts that were delivered to NASA for testing. Their design, fabricated on a washout mandrel, had a uniform-diameter composite tube with composite tapered ends. Each tapered end contained a titanium end fitting with facing conical ramps that are overlaid and overwrapped with composite materials. The highly loaded struts were loaded in both tension and compression, with ultimate failure produced in compression. Results for the two struts tested are presented and discussed, along with measured deflections, strains and observed failure mechanisms.

Optomechanical Design and Analysis Considerations on the Lunar Orbiter Laser Altimeter

NASA Technical Reports Server (NTRS)

Schmidt. Stephen; Mamakos, William; Matzinger, Elizabeth; Wall, Sheila

2007-01-01

This paper presents the mechanical design and analysis work completed on the Lunar Orbiter Laser Altimeter (LOLA). LOLA is one of six instruments on the Lunar Reconnaissance Orbiter (LRO), scheduled to launch in 2008. LOLA's main objective is to produce a high-resolution global lunar topographic model to aid in safe landings and enhance surface mobility in future exploration missions. LOLA will also look for evidence of ice water in the permanently shadowed regions around the lunar poles. Beryllium was chosen as the primary material for the LOLA Optical Transmitter Assembly to take advantage of the material's low mass density for light weight optical instrument design and for CTE matching of the refractive optical components. In addition, the thermal conductivity and specific heat of beryllium minimizes thermal gradients and thermal excursions. Special consideration must be made for the planning and preparation to fabricate beryllium components, as well as the preparation and cleaning of the components for gold plating. Assembly challenges include handling, precision cleaning and integration and testing. Structural analysis considerations include following General Environmental Verification Specification (GEVS) guidelines for GSFC payloads. The GEVS random environment for LOLA has an acceptance level of 10.0 Grms, which was analyzed for higher frequency transients. The low frequency transients were analyzed using a Mass Acceleration Curve to obtain an equivalent static loading. In addition, Structural-Thermal-Optical analysis, commonly referred to as STOP analysis, was completed to predict optical performance under the instrument's operational thermal environment. This included stress and distortion analysis on the receiver telescope lens.

Application of Carbon Fibre Truss Technology to the Fuselage Structure of the SKYLON Spaceplane

NASA Astrophysics Data System (ADS)

Varvill, R.; Bond, A.

A reusable SSTO spaceplane employing dual mode airbreathing/rocket engines, such as SKYLON, has a voluminous fuselage in order to accommodate the considerable quantities of hydrogen fuel needed for the ascent. The loading intensity which this fuselage has to withstand is relatively low due to the modest in-flight inertial accelerations coupled with the very low density of liquid hydrogen. Also the requirement to accommo- date considerable temperature differentials between the internal cryogenic tankage and the aerodynamically heated outer skin of the vehicle imposes an additional design constraint that results in an optimum fuselage structural concept very different to conventional aircraft or rocket practice. Several different structural con- cepts exist for the primary loadbearing structure. This paper explores the design possibilities of the various types and explains why an independent near ambient temperature CFRP truss structure was selected for the SKYLON vehicle. The construction of such a truss structure, at a scale not witnessed since the days of the airship, poses a number of manufacturing and design difficulties. In particular the construction of the nodes and their attachment to the struts is considered to be a key issue. This paper describes the current design status of the overall truss geometry, strut construction and manufacturing route, and the final method of assembly. The results of a preliminary strut and node test programme are presented which give confidence that the design targets will eventually be met.

Plug nozzles: The ultimate customer driven propulsion system

NASA Technical Reports Server (NTRS)

Aukerman, Carl A.

1991-01-01

This paper presents the results of a study applying the plug cluster nozzle concept to the propulsion system for a typical lunar excursion vehicle. Primary attention for the design criteria is given to user defined factors such as reliability, low volume, and ease of propulsion system development. Total thrust and specific impulse are held constant in the study while other parameters are explored to minimize the design chamber pressure. A brief history of the plug nozzle concept is included to point out the advanced level of technology of the concept and the feasibility of exploiting the variables considered in this study. The plug cluster concept looks very promising as a candidate for consideration for the ultimate customer driven propulsion system.

Plug nozzles - The ultimate customer driven propulsion system. [applied to manned lunar and Martian landers

NASA Technical Reports Server (NTRS)

Aukerman, Carl A.

1991-01-01

This paper presents the results of a study applying the plug cluster nozzle concept to the propulsion system for a typical lunar excursion vehicle. Primary attention for the design criteria is given to user defined factors such as reliability, low volume, and ease of propulsion system development. Total thrust and specific impulse are held constant in the study while other parameters are explored to minimize the design chamber pressure. A brief history of the plug nozzle concept is included to point out the advanced level of technology of the concept and the feasibility of exploiting the variables considered in the study. The plug cluster concept looks very promising as a candidate for consideration for the ultimate customer driven propulsion system.

The Filled Arm Fizeau Telescope (FFT)

NASA Technical Reports Server (NTRS)

Synnott, S. P.

1991-01-01

Attention is given to the design of a Mills Cross imaging interferometer in which the arms are fully filled with mirror segments of a Ritchey-Chretien primary and which has sensitivity to 27th magnitude per pixel and resolution a factor of 10 greater than Hubble. The optical design, structural configuration, thermal disturbances, and vibration, material, control, and metrology issues, as well as scientific capabilities are discussed, and technology needs are identified. The technologies under consideration are similar to those required for the development of the other imaging interferometers that have been proposed over the past decade. A comparison of the imaging capabilities of a 30-m diameter FFT, an 8-m telescope with a collecting area equal to that of the FFT, and the HST is presented.

The pursuit of Leadership in Energy and Environmental Design (LEED) certification for campus housing at public universities

NASA Astrophysics Data System (ADS)

Konvalinka, April Hicks

This dissertation identifies the reasons why institutions of higher education pursue Leadership in Energy and Environmental Design (LEED) certification for new construction of campus housing. The research was guided by three questions: 1. Why did the institution choose to pursue LEED certification for campus housing? 2. What considerations should be made in the design, development, and planning process of a LEED residence hall? 3. What significant impact has the LEED residence hall made on campus? The outcomes of this study will provide insight to university and housing administrators who are considering pursuit of LEED certification for new residence hall development. The primary sources of data are chief housing officers or their designees at public four-year colleges and universities with new campus housing awarded LEED certification. Qualitative research techniques were used to conduct interviews by LEED certification level: Platinum, Silver, Gold, and Certified. Data collection ended when data saturation of each question in each certification level was achieved. This dissertation offers reasons why universities pursue LEED certification: state requirement, institutional commitment, institutional standard, environmental stewardship, departmental decision, and student interest. Additionally, considerations and lessons learned from the pursuit of LEED certification have been identified and can serve as a guide to housing administrators who aim to achieve any LEED level certification.

Designing exposure registries for improved tracking of occupational exposure and disease.

PubMed

Arrandale, Victoria H; Bornstein, Stephen; King, Andrew; Takaro, Timothy K; Demers, Paul A

2016-06-27

Registries are one strategy for collecting information on occupational exposure and disease in populations. Recently leaders in the Canadian occupational health and safety community have shown an interest in the use of occupational exposure registries. The primary goal of this study was to review a series of Canadian exposure registries to identify their strengths and weaknesses as a tool for tracking occupational exposure and disease in Canada. A secondary goal was to identify the features of an exposure registry needed to specifically contribute to prevention, including the identification of new exposure-disease relationships. A documentary review of five exposure registries from Canada was completed. Strengths and limitations of the registries were compared and key considerations for designing new registries were identified. The goals and structure of the exposure registries varied considerably. Most of the reviewed registries had voluntary registration, which presents challenges for the use of the data for either surveillance or epidemiology. It is recommended that eight key issues be addressed when planning new registries: clear registry goal(s), a definition of exposure, data to be collected (and how it will be used), whether enrolment will be mandatory, as well as ethical, privacy and logistical considerations. When well constructed, an exposure registry can be a valuable tool for surveillance, epidemiology and ultimately the prevention of occupational disease. However, exposure registries also have a number of actual and potential limitations that need to be considered.

Diagnosis and management of Duchenne muscular dystrophy, part 3: primary care, emergency management, psychosocial care, and transitions of care across the lifespan

PubMed Central

Birnkrant, David J; Bushby, Katharine; Bann, Carla M; Apkon, Susan D; Blackwell, Angela; Colvin, Mary K; Cripe, Linda; Herron, Adrienne R; Kennedy, Annie; Kinnett, Kathi; Naprawa, James; Noritz, Garey; Poysky, James; Street, Natalie; Trout, Christina J; Weber, David R; Ward, Leanne M

2018-01-01

Improvements in the function, quality of life, and longevity of patients with Duchenne muscular dystrophy (DMD) have been achieved through a multidisciplinary approach to management across a range of health-care specialties. In part 3 of this update of the DMD care considerations, we focus on primary care, emergency management, psychosocial care, and transitions of care across the lifespan. Many primary care and emergency medicine clinicians are inexperienced at managing the complications of DMD. We provide a guide to the acute and chronic medical conditions that these first-line providers are likely to encounter. With prolonged survival, individuals with DMD face a unique set of challenges related to psychosocial issues and transitions of care. We discuss assessments and interventions that are designed to improve mental health and independence, functionality, and quality of life in critical domains of living, including health care, education, employment, interpersonal relationships, and intimacy. PMID:29398641

Patient-centered medical homes in Louisiana had minimal impact on Medicaid population's use of acute care and costs.

PubMed

Cole, Evan S; Campbell, Claudia; Diana, Mark L; Webber, Larry; Culbertson, Richard

2015-01-01

The patient-centered medical home model of primary care has received considerable attention for its potential to improve outcomes and reduce health care costs. Yet little information exists about the model's ability to achieve these goals for Medicaid patients. We sought to evaluate the effect of patient-centered medical home certification of Louisiana primary care clinics on the quality and cost of care over time for a Medicaid population. We used a quasi-experimental pre-post design with a matched control group to assess the effect of medical home certification on outcomes. We found no impact on acute care use and modest support for reduced costs and primary care use among medical homes serving higher proportions of chronically ill patients. These findings provide preliminary results related to the ability of the patient-centered medical home model to improve outcomes for Medicaid beneficiaries. The findings support a case-mix-adjusted payment policy for medical homes going forward. Project HOPE—The People-to-People Health Foundation, Inc.

Pre-Visit Prioritization for Complex Patients with Diabetes: Randomized Trial Design and Implementation within an Integrated Health Care System

PubMed Central

Grant, Richard W; Uratsu, Connie S; Hansen, Karen R; Altschuler, Andrea; Kim, Eileen; Fireman, Bruce; Adams, Alyce S; Schmittdiel, Julie A; Heisler, Michele

2016-01-01

Background/Aims Despite robust evidence to guide clinical care, most patients with diabetes do not meet all goals of risk factor control. Improved patient-provider communication during time-limited primary care visits may represent one strategy for improving diabetes care. Methods We designed a controlled, cluster-randomized, multi-site intervention (Pre-Visit Prioritization for Complex Patients with Diabetes) that enables patients with poorly controlled type 2 diabetes to identify their top priorities prior to a scheduled visit and sends these priorities to the primary care physician progress note in the electronic medical record. In this paper, we describe strategies to address challenges to implementing our health IT-based intervention study within a large health care system. Results This study is being conducted in 30 primary care practices within a large integrated care delivery system in Northern California. Over a 12-week period (3/1/2015 – 6/6/2015), 146 primary care physicians consented to enroll in the study (90.1%) and approved contact with 2496 of their patients (97.6%). Implementation challenges included: (1) Navigating research vs. quality improvement requirements; (2) Addressing informed consent considerations; and (3) Introducing a new clinical tool into a highly time-constrained workflow. Strategies for successfully initiating this study included engagement with institutional leaders, Institutional Review Board members, and clinical stakeholders at multiple stages both before and after notice of Federal funding; flexibility by the research team in study design; and strong support from institutional leadership for “self-learning health system” research. Conclusions By paying careful attention to identifying and collaborating with a wide range of key clinical stakeholders, we have shown that researchers embedded within a learning care system can successfully apply rigorous clinical trial methods to test new care innovations. PMID:26820612

Pre-Visit Prioritization for complex patients with diabetes: Randomized trial design and implementation within an integrated health care system.

PubMed

Grant, Richard W; Uratsu, Connie S; Estacio, Karen R; Altschuler, Andrea; Kim, Eileen; Fireman, Bruce; Adams, Alyce S; Schmittdiel, Julie A; Heisler, Michele

2016-03-01

Despite robust evidence to guide clinical care, most patients with diabetes do not meet all goals of risk factor control. Improved patient-provider communication during time-limited primary care visits may represent one strategy for improving diabetes care. We designed a controlled, cluster-randomized, multi-site intervention (Pre-Visit Prioritization for Complex Patients with Diabetes) that enables patients with poorly controlled type 2 diabetes to identify their top priorities prior to a scheduled visit and sends these priorities to the primary care physician progress note in the electronic medical record. In this paper, we describe strategies to address challenges to implementing our health IT-based intervention study within a large health care system. This study is being conducted in 30 primary care practices within a large integrated care delivery system in Northern California. Over a 12-week period (3/1/2015-6/6/2015), 146 primary care physicians consented to enroll in the study (90.1%) and approved contact with 2496 of their patients (97.6%). Implementation challenges included: (1) navigating research vs. quality improvement requirements; (2) addressing informed consent considerations; and (3) introducing a new clinical tool into a highly time-constrained workflow. Strategies for successfully initiating this study included engagement with institutional leaders, Institutional Review Board members, and clinical stakeholders at multiple stages both before and after notice of Federal funding; flexibility by the research team in study design; and strong support from institutional leadership for "self-learning health system" research. By paying careful attention to identifying and collaborating with a wide range of key clinical stakeholders, we have shown that researchers embedded within a learning care system can successfully apply rigorous clinical trial methods to test new care innovations. Copyright © 2016 Elsevier Inc. All rights reserved.

Design Considerations for a Water Treatment System Utilizing Ultra-Violet Light Emitting Diodes

DTIC Science & Technology

2014-03-27

DESIGN CONSIDERATIONS FOR A WATER TREATMENT SYSTEM UTILIZING ULTRA-VIOLET LIGHT EMITTING DIODES...the United States. ii AFIT-ENV-14-M-58 DESIGN CONSIDERATIONS FOR A WATER TREATMENT SYSTEM UTILIZING ULTRA-VIOLET LIGHT EMITTING DIODES...DISTRIBUTION UNLIMITED. iii AFIT-ENV-14-M-58 DESIGN CONSIDERATIONS FOR A WATER TREATMENT SYSTEM UTILIZING ULTRA-VIOLET LIGHT EMITTING

Efficient Power-Transfer Capability Analysis of the TET System Using the Equivalent Small Parameter Method.

PubMed

Yanzhen Wu; Hu, A P; Budgett, D; Malpas, S C; Dissanayake, T

2011-06-01

Transcutaneous energy transfer (TET) enables the transfer of power across the skin without direct electrical connection. It is a mechanism for powering implantable devices for the lifetime of a patient. For maximum power transfer, it is essential that TET systems be resonant on both the primary and secondary sides, which requires considerable design effort. Consequently, a strong need exists for an efficient method to aid the design process. This paper presents an analytical technique appropriate to analyze complex TET systems. The system's steady-state solution in closed form with sufficient accuracy is obtained by employing the proposed equivalent small parameter method. It is shown that power-transfer capability can be correctly predicted without tedious iterative simulations or practical measurements. Furthermore, for TET systems utilizing a current-fed push-pull soft switching resonant converter, it is found that the maximum energy transfer does not occur when the primary and secondary resonant tanks are "tuned" to the nominal resonant frequency. An optimal turning point exists, corresponding to the system's maximum power-transfer capability when optimal tuning capacitors are applied.

Primary total hip replacement versus hip resurfacing - hospital considerations.

PubMed

Ward, William G; Carter, Christina J; Barone, Marisa; Jinnah, Riyaz

2011-01-01

Multiple factors regarding surgical procedures and patient selection affect hospital staffing needs as well as hospital revenues. In order to better understand the potential impact on hospitals that hip arthroplasty device selection (standard total hip arthroplasty vs. resurfacing) creates, a review of all primary hip arthroplasties performed at one institution was designed to identify factors that impacted hospital staffing needs and revenue generation. All primary hip arthroplasties undertaken over three fiscal years (2008 to 2010) were reviewed, utilizing only hospital business office data and medical records data that had been previously extracted prior for billing purposes. Analysis confirmed differing demographics for two hip arthroplasty populations, with the resurfacing patients (compared to the conventional total hip arthroplasty population) consisting of younger patients (mean age, 50 vs. 61 years), who were more often male (75% vs. 45%), were more likely to have osteoarthritis as their primary diagnosis (83 vs. 67%) and were more often covered by managed care or commercial insurance (83 vs. 34%). They also had shorter hospital stays (mean length of stay, 2.3 vs. 4.1 days) and consequently provided a more favorable financial revenue stream to the hospital on a per patient basis. Several trends appeared during the study periods. There was a steady increase in all procedures in all groups except for the resurfacings, which decreased 26% in males and 53% in females between 2009 and 2010. Differences were observed in the demographics of patients presenting for resurfacing, compared to those presenting for conventional total hip arthroplasty. In addition to the revenue stream considerations, institutions undertaking a resurfacing program must commit the resources and planning in order to rehabilitate these patients more expeditiously than is usually required with conventional hip arthroplasty patients.

Problems Facing Rural Schools.

ERIC Educational Resources Information Center

Stewart, C. E.; And Others

Problems facing rural Scottish schools range from short term consideration of daily operation to long term consideration of organizational alternatives. Addressed specifically, such problems include consideration of: (1) liaison between a secondary school and its feeder primary schools; (2) preservice teacher training for work in small, isolated…

Highly accurate photogrammetric measurements of the Planck reflectors

NASA Astrophysics Data System (ADS)

Amiri Parian, Jafar; Gruen, Armin; Cozzani, Alessandro

2017-11-01

The Planck mission of the European Space Agency (ESA) is designed to image the anisotropies of the Cosmic Background Radiation Field over the whole sky. To achieve this aim, sophisticated reflectors are used as part of the Planck telescope receiving system. The system consists of secondary and primary reflectors which are sections of two different ellipsoids of revolution with mean diameters of 1 and 1.6 meters. Deformations of the reflectors which influence the optical parameters and the gain of receiving signals are investigated in vacuum and at very low temperatures. For this investigation, among the various high accuracy measurement techniques, photogrammetry was selected. With respect to the photogrammetric measurements, special considerations had to be taken into account in design steps, measurement arrangement and data processing to achieve very high accuracies. The determinability of additional parameters of the camera under the given network configuration, datum definition, reliability and precision issues as well as workspace limits and propagating errors from different sources are considered. We have designed an optimal photogrammetric network by heuristic simulation for the flight model of the primary and the secondary reflectors with relative precisions better than 1:1000'000 and 1:400'000 to achieve the requested accuracies. A least squares best fit ellipsoid method was developed to determine the optical parameters of the reflectors. In this paper we will report about the procedures, the network design and the results of real measurements.

Human factors dimensions in the evolution of increasingly automated control rooms for near-earth satellites

NASA Technical Reports Server (NTRS)

Mitchell, C. M.

1982-01-01

The NASA-Goddard Space Flight Center is responsible for the control and ground support for all of NASA's unmanned near-earth satellites. Traditionally, each satellite had its own dedicated mission operations room. In the mid-seventies, an integration of some of these dedicated facilities was begun with the primary objective to reduce costs. In this connection, the Multi-Satellite Operations Control Center (MSOCC) was designed. MSOCC represents currently a labor intensive operation. Recently, Goddard has become increasingly aware of human factors and human-machine interface issues. A summary is provided of some of the attempts to apply human factors considerations in the design of command and control environments. Current and future activities with respect to human factors and systems design are discussed, giving attention to the allocation of tasks between human and computer, and the interface for the human-computer dialogue.

A school-based comprehensive lifestyle intervention among chinese kids against obesity (CLICK-Obesity): rationale, design and methodology of a randomized controlled trial in Nanjing city, China.

PubMed

Xu, Fei; Ware, Robert S; Tse, Lap Ah; Wang, Zhiyong; Hong, Xin; Song, Aiju; Li, Jiequan; Wang, Youfa

2012-06-15

The prevalence of childhood obesity among adolescents has been rapidly rising in Mainland China in recent decades, especially in urban and rich areas. There is an urgent need to develop effective interventions to prevent childhood obesity. Limited data regarding adolescent overweight prevention in China are available. Thus, we developed a school-based intervention with the aim of reducing excess body weight in children. This report described the study design. We designed a cluster randomized controlled trial in 8 randomly selected urban primary schools between May 2010 and December 2013. Each school was randomly assigned to either the intervention or control group (four schools in each group). Participants were the 4th graders in each participating school. The multi-component program was implemented within the intervention group, while students in the control group followed their usual health and physical education curriculum with no additional intervention program. The intervention consisted of four components: a) classroom curriculum, (including physical education and healthy diet education), b) school environment support, c) family involvement, and d) fun programs/events. The primary study outcome was body composition, and secondary outcomes were behaviour and behavioural determinants. The intervention was designed with due consideration of Chinese cultural and familial tradition, social convention, and current primary education and exam system in Mainland China. We did our best to gain good support from educational authorities, school administrators, teachers and parents, and to integrate intervention components into schools' regular academic programs. The results of and lesson learned from this study will help guide future school-based childhood obesity prevention programs in Mainland China. ChiCTR-ERC-11001819.

Guidelines for the Reporting of Treatment Trials for Alcohol Use Disorders

PubMed Central

Witkiewitz, Katie; Finney, John W.; Harris, Alex H.S; Kivlahan, Daniel R.; Kranzler, Henry R.

2015-01-01

Background The primary goals in conducting clinical trials of treatments for alcohol use disorders (AUDs) is to identify efficacious treatments and determine which treatments are most efficacious for which patients. Accurate reporting of study design features and results is imperative to enable readers of research reports to evaluate to what extent a study has achieved these goals. Guidance on quality of clinical trial reporting has evolved substantially over the past two decades, primarily through the publication and widespread adoption of the Consolidated Standards of Reporting Trials (CONSORT) statement. However, there is room to improve the adoption of those standards in reporting the design and findings of treatment trials for AUD. Methods Narrative review of guidance on reporting quality in AUD treatment trials. Results Despite improvements in the reporting of results of treatment trials for AUD over the past two decades, many published reports provide insufficient information on design or methods. Conclusions The reporting of alcohol treatment trial design, analysis, and results requires improvement in four primary areas: (1) trial registration, (2) procedures for recruitment and retention, (3) procedures for randomization and intervention design considerations, and (4) statistical methods used to assess treatment efficacy. Improvements in these areas and the adoption of reporting standards by authors, reviewers, and editors are critical to an accurate assessment of the reliability and validity of treatment effects. Continued developments in this area are needed to move AUD treatment research forward via systematic reviews and meta-analyses that maximize the utility of completed studies. PMID:26259958

Compatibility Condition in Theory of Solid Mechanics (Elasticity, Structures, and Design Optimization)

NASA Technical Reports Server (NTRS)

Patnaik, Surya N.; Pai, Shantaram S.; Hopkins, Dale A.

2007-01-01

The strain formulation in elasticity and the compatibility condition in structural mechanics have neither been understood nor have they been utilized. This shortcoming prevented the formulation of a direct method to calculate stress. We have researched and understood the compatibility condition for linear problems in elasticity and in finite element analysis. This has lead to the completion of the method of force with stress (or stress resultant) as the primary unknown. The method in elasticity is referred to as the completed Beltrami-Michell formulation (CBMF), and it is the integrated force method (IFM) in structures. The dual integrated force method (IFMD) with displacement as the primary unknown has been formulated. IFM and IFMD produce identical responses. The variational derivation of the CBMF yielded the new boundary compatibility conditions. The CBMF can be used to solve stress, displacement, and mixed boundary value problems. The IFM in structures produced high-fidelity response even with a modest finite element model. The IFM has influenced structural design considerably. A fully utilized design method for strength and stiffness limitation has been developed. The singularity condition in optimization has been identified. The CBMF and IFM tensorial approaches are robust formulations because of simultaneous emphasis on the equilibrium equation and the compatibility condition.

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Alternate design considerations. 177.340 Section 177.340... TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design, unusual form, or special materials, which cannot be reviewed or...

NASA Space Mechanisms Handbook: Lessons Learned Documented

NASA Technical Reports Server (NTRS)

Fusaro, Robert L.

1999-01-01

The need to improve space mechanism reliability is underscored by a long history of flight failures and anomalies caused by malfunctioning mechanisms on spacecraft and launch vehicles. Some examples of these failures are listed in a table. Because much experience has been gained over the years, many specialized design practices have evolved and many unsatisfactory design approaches have been identified.NASA and the NASA Lewis Research Center conducted a Lessons Learned Study (refs. 1 and 2) and wrote a handbook to document what has been learned in the past. The primary goals of the handbook were to identify desirable and undesirable design practices for space mechanisms and to reduce the number of failures caused by the repetition of past design errors. Another goal was to identify a variety of design approaches for specific applications and to provide the associated considerations and caveats for each approach in an effort to help designers choose the approach most suitable for each application. This technical summary outlines the goals and objectives of the handbook and study as well as the contents of the handbook.

The BepiColombo Laser Altimeter (BeLA) power converter module (PCM): Concept and characterisation.

PubMed

Rodrigo, J; Gasquet, E; Castro, J-M; Herranz, M; Lara, L-M; Muñoz, M; Simon, A; Behnke, T; Thomas, N

2017-03-01

This paper presents the principal considerations when designing DC-DC converters for space instruments, in particular for the power converter module as part of the first European space laser altimeter: "BepiColombo Laser Altimeter" on board the European Space Agency-Japan Aerospace Exploration Agency (JAXA) mission BepiColombo. The main factors which determine the design of the DC-DC modules in space applications are printed circuit board occupation, mass, DC-DC converter efficiency, and environmental-survivability constraints. Topics included in the appropriated DC-DC converter design flow are hereby described. The topology and technology for the primary and secondary stages, input filters, transformer design, and peripheral components are discussed. Component selection and design trade-offs are described. Grounding, load and line regulation, and secondary protection circuitry (under-voltage, over-voltage, and over-current) are then introduced. Lastly, test results and characterization of the final flight design are also presented. Testing of the inrush current, the regulated output start-up, and the switching function of the power supply indicate that these performances are fully compliant with the requirements.

New Stagnation Arc Jet Model Design for Testing ADEPT 3-D Carbon Cloth

NASA Technical Reports Server (NTRS)

Beck, R.; Chen, Y.-K.; Wercinski, P.; Agrawal, P.; Chavez-Garcia, J.

2017-01-01

The ADEPT concept has been considered as an entry, descent and landing system to enable Human Mars class missions. Ground rules for the Mars studies required aerocapture, orbit, and then entry. The design utilizes a 3-D woven carbon cloth fabric as both heatshield and primary structure and design guidelines required 6 layers remaining after all entry events. The peak heating predicted for the ADEPT carbon cloth was 35 Wcm2 and resulting temperatures were predicted to be 1400K. Predictions for carbon mass loss were performed using equilibrium thermochemistry, which is only accurate for T2000K. Carbon oxidation is kinetically controlled at T2000K, and mass loss drops off considerably from equilibrium values. Design of the cloth thickness and mass would be significantly reduced if kinetics were considered. This effort was to design a stagnation test article design that could be used in the AHF with varying levels of oxygen where the results could be used to develop an engineering model to describe the recession rate of the carbon as a function of the partial pressure of monotomic oxygen.

Gender Consideration in Experiment Design for Air Break in Prebreathe

NASA Technical Reports Server (NTRS)

Conkin, Johnny; Dervay, Joseph P.; Gernhardt, Michael L.

2007-01-01

If gender is a confounder of the decompression sickness (DCS) or venous gas emboli (VGE) outcomes of a proposed air break in oxygen prebreathe (PB) project, then decisions about the final experiment design must be made. We evaluated if the incidence of DCS and VGE from tests in altitude chambers over 20 years were different between men and women after resting and exercise PB protocols. Nitrogen washout during PB is our primary risk mitigation strategy to prevent subsequent DCS and VGE in subjects. Bubbles in the pulmonary artery (venous blood) were detected from the precordial position using Doppler ultrasound bubble detectors. The subjects were monitored for VGE for four min at about 15 min intervals for the duration of the altitude exposure, with maximum bubble grade assigned a Spencer Grade of IV.

Evaluation of Recent Upgrades to the NESS (Nuclear Engine System Simulation) Code

NASA Technical Reports Server (NTRS)

Fittje, James E.; Schnitzler, Bruce G.

2008-01-01

The Nuclear Thermal Rocket (NTR) concept is being evaluated as a potential propulsion technology for exploratory expeditions to the moon, Mars, and beyond. The need for exceptional propulsion system performance in these missions has been documented in numerous studies, and was the primary focus of a considerable effort undertaken during the Rover/NERVA program from 1955 to 1973. The NASA Glenn Research Center is leveraging this past NTR investment in their vehicle concepts and mission analysis studies with the aid of the Nuclear Engine System Simulation (NESS) code. This paper presents the additional capabilities and upgrades made to this code in order to perform higher fidelity NTR propulsion system analysis and design, and a comparison of its results to the Small Nuclear Rocket Engine (SNRE) design.

OARSI Clinical Trials Recommendations: Design and conduct of clinical trials for primary prevention of osteoarthritis by joint injury prevention in sport and recreation.

PubMed

Emery, C A; Roos, E M; Verhagen, E; Finch, C F; Bennell, K L; Story, B; Spindler, K; Kemp, J; Lohmander, L S

2015-05-01

The risk of post-traumatic osteoarthritis (PTOA) substantially increases following joint injury. Research efforts should focus on investigating the efficacy of preventative strategies in high quality randomized controlled trials (RCT). The objective of these OARSI RCT recommendations is to inform the design, conduct and analytical approaches to RCTs evaluating the preventative effect of joint injury prevention strategies. Recommendations regarding the design, conduct, and reporting of RCTs evaluating injury prevention interventions were established based on the consensus of nine researchers internationally with expertise in epidemiology, injury prevention and/or osteoarthritis (OA). Input and resultant consensus was established through teleconference, face to face and email correspondence over a 1 year period. Recommendations for injury prevention RCTs include context specific considerations regarding the research question, research design, study participants, randomization, baseline characteristics, intervention, outcome measurement, analysis, implementation, cost evaluation, reporting and future considerations including the impact on development of PTOA. Methodological recommendations for injury prevention RCTs are critical to informing evidence-based practice and policy decisions in health care, public health and the community. Recommendations regarding the interpretation and conduct of injury prevention RCTs will inform the highest level of evidence in the field. These recommendations will facilitate between study comparisons to inform best practice in injury prevention that will have the greatest public health impact. Copyright © 2015 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Primary school teachers’ opinions and attitudes towards stuttering in two South African urban education districts

PubMed Central

Harty, Michal; Louis, Kenneth O. St.; Thabane, Lehana; Kathard, Harsha

2016-01-01

Background As teachers form an important part of the intervention process with children who stutter in primary school, the primary aim was to describe primary school teachers’ attitudes in South Africa. The secondary aim was to compare teachers’ attitudes towards stuttering in South Africa with those from a pooled group of respondents in the Public Opinion Survey of Human Attributes–Stuttering (POSHA-S) database from different countries collected in 2009–2014. Method A quantitative, cross-sectional survey research design was used. Primary schools in two education districts in Western Cape, South Africa, were sampled. The POSHA-S, a self-administered questionnaire, was completed by a cluster sample of 469 participants. Results Overall positive attitudes towards stuttering were found, specifically related to the potential of people who stutter, although the result should be interpreted with caution as the sample was not homogenously positive. Teachers still had misconceptions about personality stereotypes and the cause of stuttering. The attitudes of the South African sample were slightly more positive compared with the samples in the current POSHA-S database. Conclusion When developing stuttering intervention strategies, there are a number of key considerations to take into account. The study provides a basis for speech-language therapists to think about intervention with teachers and which areas of stuttering to consider.

The need for ergonomics considerations for the design and development of agricultural machinery in Thailand.

PubMed

Mamansari, D U; Salokhe, V M

1995-06-01

Agriculture plays an important role in developing countries which are mainly located in tropical regions. Agriculture is an industry with tremendous opportunities for the application of ergonomics principles. Working conditions are extremely difficult due to severe environmental conditions, long working hours, strenuous work and the use of mobile equipment. The ignorance of the majority of ergonomics principles in the design of agricultural equipment make the conditions more difficult. Thailand is one of the important suppliers of agricultural products in the world. Mechanization has expanded tremendously during the last 10 years and the number of agricultural machinery has rapidly increased. This paper looks at ergonomics principles which must be considered in the design and development of agricultural machines and equipment used in Thailand. It was identified that the common farming system in Thailand is rice-based cultivation, mostly in swampy conditions with heavy clay soil. It was also found that the most energy-consuming task in agriculture was primary cultivation. The most widely used machine is a power tiller which is suitable for the farm sizes available and can be operated easily. Most of the power tillers and other equipment were found to be locally made, with less than 5% imported. Unfortunately, there was no standardization in power tiller manufacturing which led to increasing farmers' strain. There is still a need to collect more ergonomics data of Thai farmers such as anthropometry, strength and physical work capacity for the design and development of agricultural machines and equipment used in Thailand. Different ergonomic consideration for the design and development of agricultural machinery have been suggested.

Spherical Primary Optical Telescope (SPOT): An Architecture Demonstration for Cost-effective Large Space Telescopes

NASA Technical Reports Server (NTRS)

Feinberg, Lee D.; Hagopian, John; Budinoff, Jason; Dean, Bruce; Howard, Joe

2004-01-01

This paper summarizes efforts underway at the Goddard Space Flight Center to demonstrate a new type of space telescope architecture that builds on the rigid segmented telescope heritage of the James Webb Space Telescope but that solves several key challenges for future space telescopes. The architecture is based on a cost-effective segmented spherical primary mirror combined with a unique wavefront sensing and control system that allows for continuous phasing of the primary mirror. The segmented spherical primary allows for cost-effective 3-meter class (e.g., Midex and Discovery) missions as well as enables 30-meter telescope solutions that can be manufactured in a reasonable amount of time and for a reasonable amount of money. The continuous wavefront sensing and control architecture enables missions in low-earth-orbit and missions that do not require expensive stable structures and thermal control systems. For the 30-meter class applications, the paper discusses considerations for assembling and testing the telescopes in space. The paper also summarizes the scientific and technological roadmap for the architecture and also gives an overview of technology development, design studies, and testbed activities underway to demonstrate its feasibility.

Spherical Primary Optical Telescope (SPOT): An Architecture Demonstration for Cost-effective Large Space Telescopes

NASA Technical Reports Server (NTRS)

Feinberg, Lee; Hagopian, John; Budinoff, Jason; Dean, Bruce; Howard, Joe

2005-01-01

This paper summarizes efforts underway at the Goddard Space Flight Center to demonstrate a new type of space telescope architecture that builds on the rigid, segmented telescope heritage of the James Webb Space Telescope but that solves several key challenges for future space telescopes. The architecture is based on a cost-effective segmented spherical primary mirror combined with a unique wavefront sensing and control system that allows for continuous phasing of the primary mirror. The segmented spherical primary allows for cost-effective 3-meter class (eg, Midex and Discovery) missions as well as enables 30-meter telescope solutions that can be manufactured in a reasonable amount of time and for a reasonable amount of money. The continuous wavefront sensing and control architecture enables missions in low-earth-orbit and missions that do not require expensive stable structures and thermal control systems. For the 30-meter class applications, the paper discusses considerations for assembling and testing the telescopes in space. The paper also summarizes the scientific and technological roadmap for the architecture and also gives an overview of technology development, design studies, and testbed activities underway to demonstrate it s feasibility.

Immediate vs. delayed insertion of intrauterine contraception after second trimester abortion: study protocol for a randomized controlled trial.

PubMed

Norman, Wendy V; Kaczorowski, Janusz; Soon, Judith A; Brant, Rollin; Bryan, Stirling; Trouton, Konia J; Dicus, Lyda

2011-06-14

We describe the rationale and protocol for a randomized controlled trial (RCT) to assess whether intrauterine contraception placed immediately after a second trimester abortion will result in fewer pregnancies than current recommended practice of intended placement at 4 weeks post-abortion. Decision analysis suggests the novel strategy could substantially reduce subsequent unintended pregnancies and abortions. This paper highlights considerations of design, implementation and evaluation of a trial expected to provide rigorous evidence for appropriate insertion timing and health economics of intrauterine contraception after second trimester abortion. Consenting women choosing to use intrauterine contraception after abortion for a pregnancy of 12 to 24 weeks will be randomized to insertion timing groups either immediately (experimental intervention) or four weeks (recommended care) post abortion. Primary outcome measure is pregnancy rate at one year. Secondary outcomes include: cumulative pregnancy rates over five year follow-up period, comprehensive health economic analyses comparing immediate and delayed insertion groups, and device retention rates, complication rates (infection, expulsion) and, contraceptive method satisfaction. Web-based Contraception Satisfaction Questionnaires, clinical records and British Columbia linked health databases will be used to assess primary and secondary outcomes. Enrolment at all clinics in the province performing second trimester abortions began in May 2010 and is expected to complete in late 2011. Data on one year outcomes will be available for analysis in 2014. The RCT design combined with access to clinical records at all provincial abortion clinics, and to information in provincial single-payer linked administrative health databases, birth registry and hospital records, offers a unique opportunity to evaluate such an approach by determining pregnancy rate at one through five years among enrolled women. We highlight considerations of design, implementation and evaluation of a trial expected to provide rigorous evidence for appropriate insertion timing and health economics of intrauterine contraception after second trimester abortion.

77 FR 74196 - Draft Guidance for Industry on Safety Considerations for Product Design To Minimize Medication...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-13

... document, which addresses safety achieved through drug product design, is the first in a series of planned...] Draft Guidance for Industry on Safety Considerations for Product Design To Minimize Medication Errors... Considerations for Product Design to Minimize Medication Errors.'' The draft guidance provides sponsors of...

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Alternate design considerations. 177.340 Section 177.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design,...

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Alternate design considerations. 177.340 Section 177.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design,...

46 CFR 177.340 - Alternate design considerations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Alternate design considerations. 177.340 Section 177.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.340 Alternate design considerations. When the structure of vessel is of novel design,...

Current management and prognostic factors in physiotherapy practice for patients with shoulder pain: design of a prospective cohort study.

PubMed

Karel, Yasmaine H J M; Scholten-Peeters, Wendy G M; Thoomes-de Graaf, Marloes; Duijn, Edwin; Ottenheijm, Ramon P G; van den Borne, Maaike P J; Koes, Bart W; Verhagen, Arianne P; Dinant, Geert-Jan; Tetteroo, Eric; Beumer, Annechien; van Broekhoven, Joost B; Heijmans, Marcel

2013-02-11

Shoulder pain is disabling and has a considerable socio-economic impact. Over 50% of patients presenting in primary care still have symptoms after 6 months; moreover, prognostic factors such as pain intensity, age, disability level and duration of complaints are associated with poor outcome. Most shoulder complaints in this group are categorized as non-specific. Musculoskeletal ultrasound might be a useful imaging method to detect subgroups of patients with subacromial disorders.This article describes the design of a prospective cohort study evaluating the influence of known prognostic and possible prognostic factors, such as findings from musculoskeletal ultrasound outcome and working alliance, on the recovery of shoulder pain. Also, to assess the usual physiotherapy care for shoulder pain and examine the inter-rater reliability of musculoskeletal ultrasound between radiologists and physiotherapists for patients with shoulder pain. A prospective cohort study including an inter-rater reliability study. Patients presenting in primary care physiotherapy practice with shoulder pain are enrolled. At baseline validated questionnaires are used to measure patient characteristics, disease-specific characteristics and social factors. Physical examination is performed according to the expertise of the physiotherapists. Follow-up measurements will be performed 6, 12 and 26 weeks after inclusion. Primary outcome measure is perceived recovery, measured on a 7-point Likert scale. Logistic regression analysis will be used to evaluate the association between prognostic factors and recovery. The ShoCoDiP (Shoulder Complaints and using Diagnostic ultrasound in Physiotherapy practice) cohort study will provide information on current management of patients with shoulder pain in primary care, provide data to develop a prediction model for shoulder pain in primary care and to evaluate whether musculoskeletal ultrasound can improve prognosis.

Fidelity considerations in translational research: Eating As Treatment - a stepped wedge, randomised controlled trial of a dietitian delivered behaviour change counselling intervention for head and neck cancer patients undergoing radiotherapy.

PubMed

Beck, Alison Kate; Baker, Amanda; Britton, Ben; Wratten, Chris; Bauer, Judith; Wolfenden, Luke; Carter, Gregory

2015-10-15

The confidence with which researchers can comment on intervention efficacy relies on evaluation and consideration of intervention fidelity. Accordingly, there have been calls to increase the transparency with which fidelity methodology is reported. Despite this, consideration and/or reporting of fidelity methods remains poor. We seek to address this gap by describing the methodology for promoting and facilitating the evaluation of intervention fidelity in The EAT (Eating As Treatment) project: a multi-site stepped wedge randomised controlled trial of a dietitian delivered behaviour change counselling intervention to improve nutrition (primary outcome) in head and neck cancer patients undergoing radiotherapy. In accordance with recommendations from the National Institutes of Health Behaviour Change Consortium Treatment Fidelity Workgroup, we sought to maximise fidelity in this stepped wedge randomised controlled trial via strategies implemented from study design through to provider training, intervention delivery and receipt. As the EAT intervention is designed to be incorporated into standard dietetic consultations, we also address unique challenges for translational research. We offer a strong model for improving the quality of translational findings via real world application of National Institutes of Health Behaviour Change Consortium recommendations. Greater transparency in the reporting of behaviour change research is an important step in improving the progress and quality of behaviour change research. ACTRN12613000320752 (Date of registration 21 March 2013).

Primary focal hyperhidrosis: diagnosis and management. .

PubMed

Wang, Rena; Solish, Nowell; Murray, Christian A

2008-12-01

Primary focal hyperhidrosis is a common and serious medical condition that causes considerable psychosocial morbidity. Diagnostic and effective management strategies can improve patients' quality of living dramatically.

High Dynamic Range Cognitive Radio Front Ends: Architecture to Evaluation

NASA Astrophysics Data System (ADS)

Ashok, Arun; Subbiah, Iyappan; Varga, Gabor; Schrey, Moritz; Heinen, Stefan

2016-07-01

Advent of TV white space digitization has released frequencies from 470 MHz to 790 MHz to be utilized opportunistically. The secondary user can utilize these so called TV spaces in the absence of primary users. The most important challenge for this coexistence is mutual interference. While the strong TV stations can completely saturate the receiver of the cognitive radio (CR), the cognitive radio spurious tones can disturb other primary users and white space devices. The aim of this paper is to address the challenges for enabling cognitive radio applications in WLAN and LTE. In this process, architectural considerations for the design of cognitive radio front ends are discussed. With high-IF converters, faster and flexible implementation of CR enabled WLAN and LTE are shown. The effectiveness of the architecture is shown by evaluating the CR front ends for compliance of standards namely 802.11b/g (WLAN) and 3GPP TS 36.101 (LTE).

Adaptive threshold determination for efficient channel sensing in cognitive radio network using mobile sensors

NASA Astrophysics Data System (ADS)

Morshed, M. N.; Khatun, S.; Kamarudin, L. M.; Aljunid, S. A.; Ahmad, R. B.; Zakaria, A.; Fakir, M. M.

2017-03-01

Spectrum saturation problem is a major issue in wireless communication systems all over the world. Huge number of users is joining each day to the existing fixed band frequency but the bandwidth is not increasing. These requirements demand for efficient and intelligent use of spectrum. To solve this issue, the Cognitive Radio (CR) is the best choice. Spectrum sensing of a wireless heterogeneous network is a fundamental issue to detect the presence of primary users' signals in CR networks. In order to protect primary users (PUs) from harmful interference, the spectrum sensing scheme is required to perform well even in low signal-to-noise ratio (SNR) environments. Meanwhile, the sensing period is usually required to be short enough so that secondary (unlicensed) users (SUs) can fully utilize the available spectrum. CR networks can be designed to manage the radio spectrum more efficiently by utilizing the spectrum holes in primary user's licensed frequency bands. In this paper, we have proposed an adaptive threshold detection method to detect presence of PU signal using free space path loss (FSPL) model in 2.4 GHz WLAN network. The model is designed for mobile sensors embedded in smartphones. The mobile sensors acts as SU while the existing WLAN network (channels) works as PU. The theoretical results show that the desired threshold range detection of mobile sensors mainly depends on the noise floor level of the location in consideration.

The integration of behavioral health interventions in children's health care: services, science, and suggestions.

PubMed

Kolko, David J; Perrin, Ellen

2014-01-01

Because the integration of mental or behavioral health services in pediatric primary care is a national priority, a description and evaluation of the interventions applied in the healthcare setting is warranted. This article examines several intervention research studies based on alternative models for delivering behavioral health care in conjunction with comprehensive pediatric care. This review describes the diverse methods applied to different clinical problems, such as brief mental health skills, clinical guidelines, and evidence-based practices, and the empirical outcomes of this research literature. Next, several key treatment considerations are discussed to maximize the efficiency and effectiveness of these interventions. Some practical suggestions for overcoming key service barriers are provided to enhance the capacity of the practice to deliver behavioral health care. There is moderate empirical support for the feasibility, acceptability, and clinical utility of these interventions for treating internalizing and externalizing behavior problems. Practical strategies to extend this work and address methodological limitations are provided that draw upon recent frameworks designed to simplify the treatment enterprise (e.g., common elements). Pediatric primary care has become an important venue for providing mental health services to children and adolescents due, in part, to its many desirable features (e.g., no stigma, local setting, familiar providers). Further adaptation of existing delivery models may promote the delivery of effective integrated interventions with primary care providers as partners designed to address mental health problems in pediatric healthcare.

Impact of study design on recruitment of patients to a primary care trial: an observational time series analysis of the Birmingham Atrial Fibrillation Treatment of the Aged (BAFTA) study.

PubMed

Fletcher, K; Mant, J; Roalfe, A; Hobbs, F D R

2010-12-01

recruitment targets to randomized controlled trials (RCTs) are often not met. Many interventions are used to improve recruitment but there is little empirical evidence on whether these approaches work. to examine whether changes to the design and conduct of a primary care-based RCT were associated with changes in patient recruitment. an observational time series analysis of recruitment to a primary care-based multi-centre RCT of aspirin versus warfarin for stroke prevention, which involved 330 practices. Several changes to the trial protocol and procedures were made over the 4 years of patient recruitment. For each quarter throughout the recruitment period, the recruitment rate per 1000 total population in active practices was calculated. the recruitment target of 930 patients was exceeded. Fluctuations in recruitment rate occurred during the recruitment period. Following protocol changes aimed to reduce clinical workload, there was a significant increase in recruitment during the final 6 months of the study, during a period when there was not a similarly large increase in the total population available. these findings suggest that the conduct of a trial is an important consideration if studies are to recruit successfully. Expanding the number of centres may not be the most effective way to improve recruitment.

Application of tire chips to reduce the temperature of secondary geomembranes in municipal solid waste landfills.

PubMed

Hoor, Azadeh; Rowe, R Kerry

2012-05-01

Heat generated by the biodegradation of waste and other chemical processes in a landfill can potentially affect the long-term performance of landfill liner system, in particular that of a high-density polyethylene geomembrane. In a double liner system, the difference in leachate exposure and temperature might improve the long-term performance of the secondary geomembrane compared to that of the primary geomembrane. However, in some cases, the temperature is likely to be high enough to substantially reduce the service-life of the secondary geomembrane. This study explores the possible effectiveness of using tire chips as thermal insulation between primary and secondary liners to reduce the temperature of secondary geomembranes as compared to traditional soil materials. Heat and contaminant migration analyses are performed for cases with no insulation and for cases in which a layer of soil or tire chips has been used as thermal insulation between the primary and secondary liners. The effect of insulation on prolonging the service-life of a secondary geomembrane and, consequently, on contaminant transport through a liner system is examined for the case of a volatile organic compound (dichloromethane) found in landfill leachate. The study suggests that the use of tire chips warrants consideration, however there are other practical issues that require consideration in the detailed design and construction of landfill liners. Issues such as finite service-life, low working temperature, excessive settlement, ability to generate internal heat, leaching of tire chips and limitations in performing electrical resistivity leak detection tests are identified. Copyright © 2012 Elsevier Ltd. All rights reserved.

Application of Reduced Order Transonic Aerodynamic Influence Coefficient Matrix for Design Optimization

NASA Technical Reports Server (NTRS)

Pak, Chan-gi; Li, Wesley W.

2009-01-01

Supporting the Aeronautics Research Mission Directorate guidelines, the National Aeronautics and Space Administration [NASA] Dryden Flight Research Center is developing a multidisciplinary design, analysis, and optimization [MDAO] tool. This tool will leverage existing tools and practices, and allow the easy integration and adoption of new state-of-the-art software. Today s modern aircraft designs in transonic speed are a challenging task due to the computation time required for the unsteady aeroelastic analysis using a Computational Fluid Dynamics [CFD] code. Design approaches in this speed regime are mainly based on the manual trial and error. Because of the time required for unsteady CFD computations in time-domain, this will considerably slow down the whole design process. These analyses are usually performed repeatedly to optimize the final design. As a result, there is considerable motivation to be able to perform aeroelastic calculations more quickly and inexpensively. This paper will describe the development of unsteady transonic aeroelastic design methodology for design optimization using reduced modeling method and unsteady aerodynamic approximation. The method requires the unsteady transonic aerodynamics be represented in the frequency or Laplace domain. Dynamically linear assumption is used for creating Aerodynamic Influence Coefficient [AIC] matrices in transonic speed regime. Unsteady CFD computations are needed for the important columns of an AIC matrix which corresponded to the primary modes for the flutter. Order reduction techniques, such as Guyan reduction and improved reduction system, are used to reduce the size of problem transonic flutter can be found by the classic methods, such as Rational function approximation, p-k, p, root-locus etc. Such a methodology could be incorporated into MDAO tool for design optimization at a reasonable computational cost. The proposed technique is verified using the Aerostructures Test Wing 2 actually designed, built, and tested at NASA Dryden Flight Research Center. The results from the full order model and the approximate reduced order model are analyzed and compared.

Composite Fuselage Technology

NASA Technical Reports Server (NTRS)

Lagace, Paul A.

1999-01-01

Work was conducted over a ten-year period to address the central issue of damage in primary load-bearing aircraft composite structure, specifically fuselage structure. This included the three facets of damage resistance, damage tolerance, and damage arrest. Experimental, analytical, and numerical work was conducted in order to identify and better understand the mechanisms that control the structural behavior of fuselage structures in their response to the three aspects of damage. Furthermore, work was done to develop straightforward design methodologies that can be employed by structural designers in preliminary design stages to make intelligent choices concerning the material, layup, and structural configurations so that a more efficient structure with structural integrity can be designed and built. Considerable progress was made towards achieving these goals via this work. In regard to damage tolerance considerations, the following were identified as important effects: composite layup and associated orthotropy/structural anisotropy, specifics of initial local damage mechanisms, role of longitudinal versus hoop stress, and large deformation and associated geometric nonlinearity. Means were established to account for effects of radius and for the nonlinear response. In particular, nondimensional parameters were identified to characterize the importance of nonlinearity in the response of pressurized cylinders. This led to the establishment of a iso-nonlinear-error plot for reference in structural design. Finally, in the case of damage tolerance, the general approach of the original methodology to predict the failure pressure involving extending basic plate failure data by accounting for the local stress intensification was accomplished for the general case by accounting for the mechanisms noted by utilizing the capability of the STAGS finite element code and numerically calculating the local stress intensification for the particular configuration to be considered. For the issue of damage arrest, placement of and configuration of stiffeners (including stiffener curvature), and magnitude and orientation of principal strains due to local bending were found to be key considerations. Means were established to account for stiffener effectiveness quantitatively based on radius, slit size, stiffener curvature' and relative bending stifffiesses involved. Geometric nonlinearity was also found to play an - 24 - important role here. Furthermore, it was determined that damage propagation is controlled by different mechanisms (hoop stress versus flapping stress and the associated factors involved in each) depending upon the direction of damage propagation. This latter item results in an inability to scale these phenomena in one test due to the different factors involved. Finally, the importance of shell curvature and associated instability in response to transverse loading including impact were found to be important considerations in damage resistance. A technique, involving asymmetric meshing of a finite element mesh, was developed to predict this behavior and showed excellent correlation with experimental results. Further details of these ten years of work are presented herein with references made to the fourteen documents produced during this work where full details can be found. Implications of this work are discussed and recommendations made. Although it is clear that there is more work to be done to fully understand composite fuselage technology and specifically the overall issue of damage in primary load-bearing composite structures, important understanding and capability has been extended via this work.

A systematic review of clinical decision support systems for antimicrobial management: are we failing to investigate these interventions appropriately?

PubMed

Rawson, T M; Moore, L S P; Hernandez, B; Charani, E; Castro-Sanchez, E; Herrero, P; Hayhoe, B; Hope, W; Georgiou, P; Holmes, A H

2017-08-01

Clinical decision support systems (CDSS) for antimicrobial management can support clinicians to optimize antimicrobial therapy. We reviewed all original literature (qualitative and quantitative) to understand the current scope of CDSS for antimicrobial management and analyse existing methods used to evaluate and report such systems. PRISMA guidelines were followed. Medline, EMBASE, HMIC Health and Management and Global Health databases were searched from 1 January 1980 to 31 October 2015. All primary research studies describing CDSS for antimicrobial management in adults in primary or secondary care were included. For qualitative studies, thematic synthesis was performed. Quality was assessed using Integrated quality Criteria for the Review Of Multiple Study designs (ICROMS) criteria. CDSS reporting was assessed against a reporting framework for behaviour change intervention implementation. Fifty-eight original articles were included describing 38 independent CDSS. The majority of systems target antimicrobial prescribing (29/38;76%), are platforms integrated with electronic medical records (28/38;74%), and have a rules-based infrastructure providing decision support (29/38;76%). On evaluation against the intervention reporting framework, CDSS studies fail to report consideration of the non-expert, end-user workflow. They have narrow focus, such as antimicrobial selection, and use proxy outcome measures. Engagement with CDSS by clinicians was poor. Greater consideration of the factors that drive non-expert decision making must be considered when designing CDSS interventions. Future work must aim to expand CDSS beyond simply selecting appropriate antimicrobials with clear and systematic reporting frameworks for CDSS interventions developed to address current gaps identified in the reporting of evidence. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Practical Applications of Cosmic Ray Science: Spacecraft, Aircraft, Ground Based Computation and Control Systems and Human Health and Safety

NASA Technical Reports Server (NTRS)

Atwell, William; Koontz, Steve; Normand, Eugene

2012-01-01

In this paper we review the discovery of cosmic ray effects on the performance and reliability of microelectronic systems as well as on human health and safety, as well as the development of the engineering and health science tools used to evaluate and mitigate cosmic ray effects in earth surface, atmospheric flight, and space flight environments. Three twentieth century technological developments, 1) high altitude commercial and military aircraft; 2) manned and unmanned spacecraft; and 3) increasingly complex and sensitive solid state micro-electronics systems, have driven an ongoing evolution of basic cosmic ray science into a set of practical engineering tools (e.g. ground based test methods as well as high energy particle transport and reaction codes) needed to design, test, and verify the safety and reliability of modern complex electronic systems as well as effects on human health and safety. The effects of primary cosmic ray particles, and secondary particle showers produced by nuclear reactions with spacecraft materials, can determine the design and verification processes (as well as the total dollar cost) for manned and unmanned spacecraft avionics systems. Similar considerations apply to commercial and military aircraft operating at high latitudes and altitudes near the atmospheric Pfotzer maximum. Even ground based computational and controls systems can be negatively affected by secondary particle showers at the Earth's surface, especially if the net target area of the sensitive electronic system components is large. Accumulation of both primary cosmic ray and secondary cosmic ray induced particle shower radiation dose is an important health and safety consideration for commercial or military air crews operating at high altitude/latitude and is also one of the most important factors presently limiting manned space flight operations beyond low-Earth orbit (LEO).

ULE design considerations for a 3m class light weighted mirror blank for E-ELT M5

NASA Astrophysics Data System (ADS)

Fox, Andrew; Hobbs, Tom; Edwards, Mary; Arnold, Matthew; Sawyer, Kent

2016-07-01

It is expected that the next generation of large ground based astronomical telescopes will need large fast-steering/tip-tilt mirrors made of ultra-lightweight construction. These fast-steering mirrors are used to continuously correct for atmospheric disturbances and telescope vibrations. An example of this is the European Extremely Large Telescope (E-ELT) M5 lightweight mirror, which is part of the Tip-Tilt/Field-Stabilization Unit. The baseline design for the E-ELT M5 mirror, as presented in the E-ELT Construction Proposal, is a closed-back ULE mirror with a lightweight core using square core cells. Corning Incorporated (Corning) has a long history of manufacturing lightweight mirror blanks using ULE in a closed-back construction, going back to the 1960's, and includes the Hubble Space Telescope primary mirror, Subaru Telescope secondary and tertiary mirrors, the Magellan I and II tertiary mirrors, and Kepler Space Telescope primary mirror, among many others. A parametric study of 1-meter class lightweight mirror designs showed that Corning's capability to seal a continuous back sheet to a light-weighted core structure provides superior mirror rigidity, in a near-zero thermal expansion material, relative to other existing technologies in this design space. Corning has investigated the parametric performance of several design characteristics for a 3-meter class lightweight mirror blank for the E-ELT M5. Finite Element Analysis was performed on several design scenarios to obtain weight, areal density, and first Eigen frequency. This paper presents an overview of Corning ULE and lightweight mirror manufacturing capabilities, the parametric performance of design characteristics for 1-meter class and 3-meter class lightweight mirrors, as well as the manufacturing advantages and disadvantages of those characteristics.

Analysis of series resonant converter with series-parallel connection

NASA Astrophysics Data System (ADS)

Lin, Bor-Ren; Huang, Chien-Lan

2011-02-01

In this study, a parallel inductor-inductor-capacitor (LLC) resonant converter series-connected on the primary side and parallel-connected on the secondary side is presented for server power supply systems. Based on series resonant behaviour, the power metal-oxide-semiconductor field-effect transistors are turned on at zero voltage switching and the rectifier diodes are turned off at zero current switching. Thus, the switching losses on the power semiconductors are reduced. In the proposed converter, the primary windings of the two LLC converters are connected in series. Thus, the two converters have the same primary currents to ensure that they can supply the balance load current. On the output side, two LLC converters are connected in parallel to share the load current and to reduce the current stress on the secondary windings and the rectifier diodes. In this article, the principle of operation, steady-state analysis and design considerations of the proposed converter are provided and discussed. Experiments with a laboratory prototype with a 24 V/21 A output for server power supply were performed to verify the effectiveness of the proposed converter.

Real-time energy-saving metro train rescheduling with primary delay identification

PubMed Central

Li, Keping; Schonfeld, Paul

2018-01-01

This paper aims to reschedule online metro trains in delay scenarios. A graph representation and a mixed integer programming model are proposed to formulate the optimization problem. The solution approach is a two-stage optimization method. In the first stage, based on a proposed train state graph and system analysis, the primary and flow-on delays are specifically analyzed and identified with a critical path algorithm. For the second stage a hybrid genetic algorithm is designed to optimize the schedule, with the delay identification results as input. Then, based on the infrastructure data of Beijing Subway Line 4 of China, case studies are presented to demonstrate the effectiveness and efficiency of the solution approach. The results show that the algorithm can quickly and accurately identify primary delays among different types of delays. The economic cost of energy consumption and total delay is considerably reduced (by more than 10% in each case). The computation time of the Hybrid-GA is low enough for rescheduling online. Sensitivity analyses further demonstrate that the proposed approach can be used as a decision-making support tool for operators. PMID:29474471

Evaluation of a School Building in Turkey According to the Basic Sustainable Design Criteria

NASA Astrophysics Data System (ADS)

Arslan, H. D.

2017-08-01

In Turkey, as well as many other developing countries, the significance of sustainable education buildings has only recently become recognized and the issue of sustainability issue has not been sufficiently involved in laws and regulations. In this study, first of all architectural sustainability with basic design criteria has been explained. After that selected type primary school project in Turkey has been evaluated according to the sustainable design criteria. Type project of school buildings significantly limits the sustainability performance expected from buildings. It is clear that type projects shorten the planning time as they include a designing process that is independent of settlement and they are repeated in various places with different characteristics, indeed. On the other hand; abundance of disadvantages such as the overlook of the natural physical and structural properties of the location mostly restricts the sustainable design of the building. For sustainable buildings, several factors such as the environment, land, climate, insolation, direction etc. shall be taken into consideration at the beginning stage. Therefore; implementation of type projects can be deemed to be inappropriate for sustainability.

31 CFR Appendix to Part 351 - Tax Considerations

Code of Federal Regulations, 2010 CFR

2010-07-01

.... 351, App. A Appendix to Part 351—Tax Considerations 1. What are some general tax considerations... any other obligations purchased on a discount basis. (b) Changing methods. If you use the cash basis... primary owner. (d) The purchase of a Series EE savings bond as a gift may have gift tax consequences. ...

31 CFR Appendix to Part 351 - Tax Considerations

Code of Federal Regulations, 2011 CFR

2011-07-01

.... 351, App. A Appendix to Part 351—Tax Considerations 1. What are some general tax considerations... any other obligations purchased on a discount basis. (b) Changing methods. If you use the cash basis... primary owner. (d) The purchase of a Series EE savings bond as a gift may have gift tax consequences. ...

SKALA, a log-periodic array antenna for the SKA-low instrument: design, simulations, tests and system considerations

NASA Astrophysics Data System (ADS)

de Lera Acedo, E.; Razavi-Ghods, N.; Troop, N.; Drought, N.; Faulkner, A. J.

2015-10-01

The very demanding requirements of the SKA-low instrument call for a challenging antenna design capable of delivering excellent performance in radiation patterns, impedance matching, polarization purity, cost, longevity, etc. This paper is devoted to the development (design and test of the first prototypes) of an active ultra-wideband antenna element for the low-frequency instrument of the SKA radio telescope. The antenna element and differential low noise amplifier described here were originally designed to cover the former SKA-low band (70-450 MHz) but it is now aimed to cover the re-defined SKA-low band (50-350 MHz) and furthermore the antenna is capable of performing up to 650 MHz with the current design. The design is focused on maximum sensitivity in a wide field of view (+/- 45° from zenith) and low cross-polarization ratios. Furthermore, the size and cost of the element has to be kept to a minimum as millions of these antennas will need to be deployed for the full SKA in very compact configurations. The primary focus of this paper is therefore to discuss various design implications for the SKA-low telescope.

Applications of thermal energy storage to process heat and waste heat recovery in the iron and steel industry

NASA Technical Reports Server (NTRS)

Katter, L. B.; Peterson, D. J.

1978-01-01

The system identified operates from the primary arc furnace evacuation system as a heat source. Energy from the fume stream is stored as sensible energy in a solid medium (packed bed). A steam-driven turbine is arranged to generate power for peak shaving. A parametric design approach is presented since the overall system design, at optimum payback is strongly dependent upon the nature of the electric pricing structure. The scope of the project was limited to consideration of available technology so that industry-wide application could be achieved by 1985. A search of the literature, coupled with interviews with representatives of major steel producers, served as the means whereby the techniques and technologies indicated for the specific site are extrapolated to the industry as a whole and to the 1985 time frame. The conclusion of the study is that by 1985, a national yearly savings of 1.9 million barrels of oil could be realized through recovery of waste heat from primary arc furnace fume gases on an industry-wide basis. Economic studies indicate that the proposed system has a plant payback time of approximately 5 years.

Bantam System Technology Project

NASA Technical Reports Server (NTRS)

Moon, J. M.; Beveridge, J. R.

1998-01-01

This report focuses on determining a best value, low risk, low cost and highly reliable Data and Command System for support of the launch of low cost vehicles which are to carry small payloads into low earth orbit. The ground-based DCS is considered as a component of the overall ground and flight support system which includes the DCS, flight computer, mission planning system and simulator. Interfaces between the DCS and these other component systems are considered. Consideration is also given to the operational aspects of the mission and of the DCS selected. This project involved: defining requirements, defining an efficient operations concept, defining a DCS architecture which satisfies the requirements and concept, conducting a market survey of commercial and government off-the-shelf DCS candidate systems and rating the candidate systems against the requirements/concept. The primary conclusions are that several low cost, off-the-shelf DCS solutions exist and these can be employed to provide for very low cost operations and low recurring maintenance cost. The primary recommendation is that the DCS design/specification should be integrated within the ground and flight support system design as early as possible to ensure ease of interoperability and efficient allocation of automation functions among the component systems.

Binary selectable detector holdoff circuit: Design, testing, and application. [to laser radar data acquisition system

NASA Technical Reports Server (NTRS)

Kadrmas, K. A.

1973-01-01

A very high speed switching circuit, part of a laser radar data acquisition system, has been designed and tested. The primary function of this circuit was to provide computer controlled switching of photodiode detector preamplifier power supply voltages, typically less than plus or minus 20 volts, in approximately 10 nanoseconds. Thus, in actual use, detector and/or detector preamplifier damage can be avoided as a result of sudden extremely large values of backscattered radiation being detected, such as might be due to short range, very thin atmospheric dust layers. Switching of the power supply voltages was chosen over direct switching the photodiode detector input to the preamplifier, based on system noise considerations. Also, the circuit provides a synchronized trigger pulse output for triggering devices such as the Biomation Model 8100 100 MHz analog to digital converter.

Considerations for Explosively Driven Conical Shock Tube Design: Computations and Experiments

DTIC Science & Technology

2017-02-16

ARL-TR-7953 ● FEB 2017 US Army Research Laboratory Considerations for Explosively Driven Conical Shock Tube Design : Computations...The findings in this report are not to be construed as an official Department of the Army position unless so designated by other authorized...Considerations for Explosively Driven Conical Shock Tube Designs : Computations and Experiments by Joel B Stewart Weapons and Materials Research Directorate

English Language Education in Primary Schooling in Argentina

ERIC Educational Resources Information Center

Porto, Melina

2016-01-01

This article describes public primary English language education in Argentina. I begin with background information about the country and a brief historical overview of education in general, accompanied by a portrait of primary schooling in particular. This overview involves local, political and economic considerations but also international…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wichman, K.; Tsao, J.; Mayfield, M.

The regulatory application of leak before break (LBB) for operating and advanced reactors in the U.S. is described. The U.S. Nuclear Regulatory Commission (NRC) has approved the application of LBB for six piping systems in operating reactors: reactor coolant system primary loop piping, pressurizer surge, safety injection accumulator, residual heat removal, safety injection, and reactor coolant loop bypass. The LBB concept has also been applied in the design of advanced light water reactors. LBB applications, and regulatory considerations, for pressurized water reactors and advanced light water reactors are summarized in this paper. Technology development for LBB performed by the NRCmore » and the International Piping Integrity Research Group is also briefly summarized.« less

Technical developments in international satellite business services

NASA Astrophysics Data System (ADS)

Tan, P. P.

At the conception of International Satellite Business Services (ISBS), it was a primary objective to provide flexibility for accommodating a variety of service requirements which might be established by mutual agreement between users. The design guidelines are to ensure that the space segment is efficiently utilized, while other satellite services are protected from interference. Other considerations are related to an acceptable earth segment cost, maximum connectivity in worldwide services, the capability of growth and a reasonably smooth transition into future systems, and the maintenance of high performance objectives. Attention is given to a system overview, the characteristics of satellites for ISBS, and technological developments with some application possibilities for ISBS.

Description of a 2.3 kW power transformer for space applications

NASA Technical Reports Server (NTRS)

Hansen, I.

1979-01-01

The principle features and special testing of a high voltage high power transformer designed and developed for space application are described. The transformer is operated in a series resonant inverter supplying beam power to a 30 cm mercury ion thruster. Electrical requirements include operation of 2.3 kW continuous power output, primary currents to 35 amps rms, and frequencies up to 20 kHz. High efficiency was obtained through detailed considerations of the tradeoffs available in core materials, wire selection, coil configurations and thermal control. A number of novel heat removal techniques are discussed which control the winding temperature using only the available conductive cooling.

Laboratory performance of the shaped pupil coronagraphic architecture for the WFIRST/AFTA coronagraph

NASA Astrophysics Data System (ADS)

Cady, Eric; Mejia Prada, Camilo; An, Xin; Balasubramanian, Kunjithapatham; Diaz, Rosemary; Kasdin, N. Jeremy; Kern, Brian; Kuhnert, Andreas; Nemati, Bijan; Patterson, Keith; Poberezhskiy, Ilya; Riggs, A. J. Eldorado; Ryan, Daniel; Zhou, Hanying; Zimmer, Robert; Zimmerman, Neil T.

2015-09-01

One of the two primary architectures being tested for the WFIRST-AFTA coronagraph instrument is the shaped pupil coronagraph, which uses a binary aperture in a pupil plane to create localized regions of high contrast in a subsequent focal plane. The aperture shapes are determined by optimization, and can be designed to work in the presence of secondary obscurations and spiders - an important consideration for coronagraphy with WFIRST-AFTA. We present the current performance of the shaped pupil testbed, including the results of AFTA Milestone 2, in which ≍ 6 × 10-9 contrast was achieved in three independent runs starting from a neutral setting.

Laboratory Performance of the Shaped Pupil Coronagraphic Architecture for the WFIRST-AFTA Coronagraph

NASA Technical Reports Server (NTRS)

Cady, Eric; Mejia Prada, Camilo; An, Xin; Balasubramanian, Kunjithapatha; Diaz, Rosemary; Kasdin, N. Jeremy; Kern, Brian; Kuhnert, Andreas; Nemati, Bijan; Patterson, Keith;

Mars Geoscience Orbiter and Lunar Geoscience Orbiter

NASA Technical Reports Server (NTRS)

Fuldner, W. V.; Kaskiewicz, P. F.

1983-01-01

The feasibility of using the AE/DE Earth orbiting spacecraft design for the LGO and/or MGO missions was determined. Configurations were developed and subsystems analysis was carried out to optimize the suitability of the spacecraft to the missions. The primary conclusion is that the basic AE/DE spacecraft can readily be applied to the LGO mission with relatively minor, low risk modifications. The MGO mission poses a somewhat more complex problem, primarily due to the overall maneuvering hydrazine budget and power requirements of the sensors and their desired duty cycle. These considerations dictate a modification (scaling up) of the structure to support mission requirements.

ATC contingency operations in the en-route flight regime

NASA Technical Reports Server (NTRS)

Lyman, E. G.

1981-01-01

Air traffic control (ATC) operations were examined to learn what factors of controller performance should be given consideration in the design and development of future automation systems enhancing ATC. Contingencies were of two types: those constraining airspace usage or traffic flow (i.e., weather); and those related to system and equipment usage (i.e., radar/radio status). Examination of controller response to contingencies and workload pressures showed differing effects on controller allocations of effort among the three primary function of planning, monitoring, and informaton transfer. Automation advancements oriented towards aiding the controller in performing monitoring tasks may offer the most substantial safety benefit.

Preliminary Report: Issues in selection and training for long duration space flight

NASA Technical Reports Server (NTRS)

Akins, F. R.

1979-01-01

Based on previous experience with crew selection, three important avenues of consideration for future missions are discussed: technical qualifications and expertise; medical fitness and ability to tolerate the various conditions of space; and psychological considerations including personality structure, motivation, intelligence, leadership potential, group compatibility, etc. Primary emphasis was given to the psychological considerations.

Why primary care practices should become digital health information hubs for their patients.

PubMed

Baird, Aaron; Nowak, Samantha

2014-11-25

Two interesting health care trends are currently occurring: 1) patient-facing technologies, such as personal health records, patient portals, and mobile health apps, are being adopted at rapid rates, and 2) primary care, which includes family practice, is being promoted as essential to reducing health care costs and improving health care outcomes. While these trends are notable and commendable, both remain subject to significant fragmentation and incentive misalignments, which has resulted in significant data coordination and value generation challenges. In particular, patient-facing technologies designed to increase care coordination, often fall prey to the very digital fragmentation issues they are supposed to overcome. Additionally, primary care providers are treating patients that may have considerable health information histories, but generating a single view of such multi-source data is nearly impossible. We contribute to this debate by proposing that primary care practices become digital health information hubs for their patients. Such hubs would offer health data coordination in a medically professional setting with the benefits of expert, trustworthy advice coupled with active patient engagement. We acknowledge challenges including: costs, information quality and provenance, willingness-to-share information and records, willingness-to-use (by both providers and patients), primary care scope creep, and determinations of technical and process effectiveness. Even with such potential challenges, we strongly believe that more debate is needed on this topic prior to full implementation of various health information technology incentives and reform programs currently being designed and enacted throughout the world. Ultimately, if we do not provide a meaningful way for the full spectrum of health information to be used by both providers and patients, especially early in the health care continuum, effectively improving health outcomes may remain elusive. We view the primary care practice as a central component of digital information coordination, especially when considering the current challenges of digital health information fragmentation. Given these fragmentation issues and the emphasis on primary care as central to improving health and lower overall health care costs, we suggest that primary care practices should embrace their evolving role and should seek to become digital health information hubs for their patients.

78 FR 24211 - Draft Guidance for Industry on Safety Considerations for Container Labels and Carton Labeling...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

... container labels and carton labeling design, is the second in a series of three planned guidance documents...] Draft Guidance for Industry on Safety Considerations for Container Labels and Carton Labeling Design To... entitled ``Safety Considerations for Container Labels and Carton Labeling Design to Minimize Medication...

78 FR 39736 - Draft Guidance for Industry: Considerations for the Design of Early-Phase Clinical Trials of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-02

..., choosing a study population, using a control group and blinding, dose selection, treatment plans...] Draft Guidance for Industry: Considerations for the Design of Early-Phase Clinical Trials of Cellular... document entitled ``Guidance for Industry: Considerations for the Design of Early-Phase Clinical Trials of...

Application of a multipurpose unequal probability stream survey in the Mid-Atlantic Coastal Plain

USGS Publications Warehouse

Ator, S.W.; Olsen, A.R.; Pitchford, A.M.; Denver, J.M.

2003-01-01

A stratified, spatially balanced sample with unequal probability selection was used to design a multipurpose survey of headwater streams in the Mid-Atlantic Coastal Plain. Objectives for the survey include unbiased estimates of regional stream conditions, and adequate coverage of unusual but significant environmental settings to support empirical modeling of the factors affecting those conditions. The design and field application of the survey are discussed in light of these multiple objectives. A probability (random) sample of 175 first-order nontidal streams was selected for synoptic sampling of water chemistry and benthic and riparian ecology during late winter and spring 2000. Twenty-five streams were selected within each of seven hydrogeologic subregions (strata) that were delineated on the basis of physiography and surficial geology. In each subregion, unequal inclusion probabilities were used to provide an approximately even distribution of streams along a gradient of forested to developed (agricultural or urban) land in the contributing watershed. Alternate streams were also selected. Alternates were included in groups of five in each subregion when field reconnaissance demonstrated that primary streams were inaccessible or otherwise unusable. Despite the rejection and replacement of a considerable number of primary streams during reconnaissance (up to 40 percent in one subregion), the desired land use distribution was maintained within each hydrogeologic subregion without sacrificing the probabilistic design.

Evaluation of control laws and actuator locations for control systems applicable to deformable astronomical telescope mirrors

NASA Technical Reports Server (NTRS)

Ostroff, A. J.

1973-01-01

Some of the major difficulties associated with large orbiting astronomical telescopes are the cost of manufacturing the primary mirror to precise tolerances and the maintaining of diffraction-limited tolerances while in orbit. One successfully demonstrated approach for minimizing these problem areas is the technique of actively deforming the primary mirror by applying discrete forces to the rear of the mirror. A modal control technique, as applied to active optics, has previously been developed and analyzed. The modal control technique represents the plant to be controlled in terms of its eigenvalues and eigenfunctions which are estimated via numerical approximation techniques. The report includes an extension of previous work using the modal control technique and also describes an optimal feedback controller. The equations for both control laws are developed in state-space differential form and include such considerations as stability, controllability, and observability. These equations are general and allow the incorporation of various mode-analyzer designs; two design approaches are presented. The report also includes a technique for placing actuator and sensor locations at points on the mirror based upon the flexibility matrix of the uncontrolled or unobserved modes of the structure. The locations selected by this technique are used in the computer runs which are described. The results are based upon three different initial error distributions, two mode-analyzer designs, and both the modal and optimal control laws.

Peers and adolescent smoking.

PubMed

Kobus, Kimberly

2003-05-01

There is a considerable body of empirical research that has identified adolescent peer relationships as a primary factor involved in adolescent cigarette smoking. Despite this large research base, many questions remain unanswered about the mechanisms by which peers affect youths' smoking behavior. Understanding these processes of influence is key to the development of prevention and intervention programs designed to address adolescent smoking as a significant public health concern. In this paper, theoretical frameworks and empirical findings are reviewed critically which inform the current state of knowledge regarding peer influences on teenage smoking. Specifically, social learning theory, primary socialization theory, social identity theory and social network theory are discussed. Empirical findings regarding peer influence and selection, as well as multiple reference points in adolescent friendships, including best friendships, romantic relationships, peer groups and social crowds, are also reviewed. Review of this work reveals the contribution that peers have in adolescents' use of tobacco, in some cases promoting use, and in other cases deterring it. This review also suggests that peer influences on smoking are more subtle than commonly thought and need to be examined more carefully, including consideration of larger social contexts, e.g. the family, neighborhood, and media. Recommendations for future investigations are made, as well as suggestions for specific methodological approaches that offer promise for advancing our knowledge of the contribution of peers on adolescent tobacco use.

The Emergency Department Safety Assessment and Follow-up Evaluation (ED-SAFE): method and design considerations.

PubMed

Boudreaux, Edwin D; Miller, Ivan; Goldstein, Amy B; Sullivan, Ashley F; Allen, Michael H; Manton, Anne P; Arias, Sarah A; Camargo, Carlos A

2013-09-01

Due to the concentration of individuals at-risk for suicide, an emergency department visit represents an opportune time for suicide risk screening and intervention. The Emergency Department Safety Assessment and Follow-up Evaluation (ED-SAFE) uses a quasi-experimental, interrupted time series design to evaluate whether (1) a practical approach to universally screening ED patients for suicide risk leads to improved detection of suicide risk and (2) a multi-component intervention delivered during and after the ED visit improves suicide-related outcomes. This paper summarizes the ED-SAFE's study design and methods within the context of considerations relevant to effectiveness research in suicide prevention and pertinent human participants concerns. 1440 suicidal individuals, from 8 general ED's nationally will be enrolled during three sequential phases of data collection (480 individuals/phase): (1) Treatment as Usual; (2) Universal Screening; and (3) Intervention. Data from the three phases will inform two separate evaluations: Screening Outcome (Phases 1 and 2) and Intervention (Phases 2 and 3). Individuals will be followed for 12 months. The primary study outcome is a composite reflecting completed suicide, attempted suicide, aborted or interrupted attempts, and implementation of rescue procedures during an outcome assessment. While 'classic' randomized control trials (RCT) are typically selected over quasi-experimental designs, ethical and methodological issues may make an RCT a poor fit for complex interventions in an applied setting, such as the ED. ED-SAFE represents an innovative approach to examining the complex public health issue of suicide prevention through a multi-phase, quasi-experimental design embedded in 'real world' clinical settings. Copyright © 2013 Elsevier Inc. All rights reserved.

Reducing uncertainty in dust monitoring to detect aeolian sediment transport responses to land cover change

NASA Astrophysics Data System (ADS)

Webb, N.; Chappell, A.; Van Zee, J.; Toledo, D.; Duniway, M.; Billings, B.; Tedela, N.

2017-12-01

Anthropogenic land use and land cover change (LULCC) influence global rates of wind erosion and dust emission, yet our understanding of the magnitude of the responses remains poor. Field measurements and monitoring provide essential data to resolve aeolian sediment transport patterns and assess the impacts of human land use and management intensity. Data collected in the field are also required for dust model calibration and testing, as models have become the primary tool for assessing LULCC-dust cycle interactions. However, there is considerable uncertainty in estimates of dust emission due to the spatial variability of sediment transport. Field sampling designs are currently rudimentary and considerable opportunities are available to reduce the uncertainty. Establishing the minimum detectable change is critical for measuring spatial and temporal patterns of sediment transport, detecting potential impacts of LULCC and land management, and for quantifying the uncertainty of dust model estimates. Here, we evaluate the effectiveness of common sampling designs (e.g., simple random sampling, systematic sampling) used to measure and monitor aeolian sediment transport rates. Using data from the US National Wind Erosion Research Network across diverse rangeland and cropland cover types, we demonstrate how only large changes in sediment mass flux (of the order 200% to 800%) can be detected when small sample sizes are used, crude sampling designs are implemented, or when the spatial variation is large. We then show how statistical rigour and the straightforward application of a sampling design can reduce the uncertainty and detect change in sediment transport over time and between land use and land cover types.

Production Design: Holding It Together.

ERIC Educational Resources Information Center

Connelly, James O.

1994-01-01

Discusses production design for videos. Outlines general considerations (opening, transitions, content areas, and closing) and specific considerations (typography, screen design, music, and sound effects). Offers an example. (SR)

Investigation of Teachers' Attitudes towards Computer Use in Primary Education in Kurdistan

ERIC Educational Resources Information Center

Balisane, Hewa

2015-01-01

Technological advances have pervasively changed our behaviours, beliefs and approaches in working, socialising and entertaining. Educators, including those in primary education, have acknowledged the positive effects of computer use in the classroom in various ways. With regard to pedagogical consideration, primary school teachers have adopted…

Wavefront Analysis of Adaptive Telescope

NASA Technical Reports Server (NTRS)

Hadaway, James B.; Hillman, Lloyd

1997-01-01

The motivation for this work came from a NASA Headquarters interest in investigating design concepts for a large space telescope employing active optics technology. Current and foreseeable launch vehicles will be limited to carrying around 4-5 meter diameter objects. Thus, if a large, filled-aperture telescope (6-20 meters in diameter) is to be placed in space, it will be required to have a deployable primary mirror. Such a mirror may be an inflatable membrane or a segmented mirror consisting of many smaller pieces. In any case, it is expected that the deployed primary will not be of sufficient quality to achieve diffraction-limited performance for its aperture size. Thus, an active optics system will be needed to correct for initial as well as environmentally-produced primary figure errors. Marshall Space Flight Center has developed considerable expertise in the area of active optics with the PAMELA test-bed. The combination of this experience along with the Marshall optical shop's work in mirror fabrication made MSFC the logical choice to lead NASA's effort to develop active optics technology for large, space-based, astronomical telescopes. Furthermore, UAH's support of MSFC in the areas of optical design, fabrication, and testing of space-based optical systems placed us in a key position to play a major role in the development of this future-generation telescope. A careful study of the active optics components had to be carried out in order to determine control segment size, segment quality, and segment controllability required to achieve diffraction-limited resolution with a given primary mirror. With this in mind, UAH undertook the following effort to provide NASA/MSFC with optical design and analysis support for the large telescope study. All of the work performed under this contract has already been reported, as a team member with MSFC, to NASA Headquarters in a series of presentations given between May and December of 1995. As specified on the delivery order, this report simply summarizes the material with the various UAH-written presentation packages attached as appendices.

SU-E-T-670: Radiotherapy Vault Shielding Evaluation Method for a Flattening Filter-Free (FFF) Linac-Practical Considerations and Recommendations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mihailidis, D

2015-06-15

Purpose: To date, there isn’t formal approach for flattening filter-free (FFF) linac vault shielding evaluation, thus, we propose an extension to NCRP#151 to accommodate the recent large number of FFF linac installations.Methods and Materials: We extended the approach in NCRP#151 to design two Truebeam vaults in our new cancer center for hypofractionated treatments. Monte Carlo calculations have characterized primary, scattered, leakage and neutron radiations from FFF-modes. These calculations have shown that: a) FFF primary beam is softer on the central-axis compared to flattening filtered (FF), b) the lateral dose profile is peaked on the central axis and less integral targetmore » current is required to generate the same tumor dose with the FF beam. Thus, the TVLs for FFF mode are smaller than those of the FF mode and the scatter functions of the FF mode (NCRP#151) may not be appropriate for FFF-mode, c) the neutron source strength and fluence for 18X-FFF is smaller than 18X-FF, but it is not of a concern here, no 18X-FFF-mode is available on the linac under investigation. Results: These barrier thickness are smaller (12% reduction on the average) than those computed for conventional FF mode with same realistic primary workload since, the primary TVLs used here are smaller and the WL is smaller than the conventional (almost half reduced), keeping the TADR in tolerance. Conclusions: A comprehensive method for shielding barrier calculations based on dedicated data for FFF-mode linacs is highly desired. Meanwhile, we provide an extension to NCRP#151 to accommodate the shielding design of such installations. It is also shown that if a vault is already designed for IMRT/VMAT and SABR hypofractionated treatments with FFF-mode linac, the vault can also be used for a FFF mode linac replacement, leaving some leeway for slightly higher workload on the FFF linac.« less

Nasoalveolar moulding for children with unilateral cleft lip and palate.

PubMed

Chammanam, Shaju George; Biswas, P P; Kalliath, Ranjith; Chiramel, Siji

2014-06-01

Cleft lip and palate represents the most frequently occurring congenital deformity second only to club foot deformity in our country. Wide alveolar clefts if not preceded by pre surgical orthodontic adjuncts like nasoalveolar moulding, may affect the final outcome of the primary surgery. Presurgical nasoalveolar moulding is to align and approximate the alveolar cleft segments while at the same time achieving correction of the nasal cartilage and soft tissue deformity. The device we used is designed by Barry Grayson. It is simple to fabricate, causes less discomfort to the patient and optimum results are achieved in three months of time, compared to other complicated appliances like Latham's which are more invasive. A child of 3 months presented with a complaint of unilateral cleft deformity on one side of the face. After three months of nasoalveolar moulding considerable changes were observed. The widths of the cleft alveolus were reduced and the nasal contours of columella on the cleft side showed considerable improvement.

What "price" means when buying food: insights from a multisite qualitative study with Black Americans.

PubMed

DiSantis, Katherine Isselmann; Grier, Sonya A; Odoms-Young, Angela; Baskin, Monica L; Carter-Edwards, Lori; Young, Deborah Rohm; Lassiter, Vikki; Kumanyika, Shiriki K

2013-03-01

We explored the role of price in the food purchasing patterns of Black adults and youths. We analyzed qualitative data from interviews and focus groups with socioeconomically diverse, primarily female, Black adults or parents (n = 75) and youths (n = 42) in 4 US cities. Interview protocols were locality specific, but all were designed to elicit broad discussion of food marketing variables. We performed a conventional qualitative content analysis by coding and analyzing data from each site to identify common salient themes. Price emerged as a primary influence on food purchases across all sites. Other value considerations (e.g., convenience, food quality, healthfulness of product, and family preferences) were discussed, providing a more complex picture of how participants considered the price of a product. Food pricing strategies that encourage consumption of healthful foods may have high relevance for Black persons across income or education levels. Accounting for how price intersects with other value considerations may improve the effectiveness of these strategies.

Engine design considerations for 2nd generation supersonic transports

NASA Technical Reports Server (NTRS)

Howlett, R. A.

1975-01-01

The environmental and economic goals projected for advanced supersonic transports will require revolutionary improvements in propulsion systems. Variable cycle engine concepts that incorporate unique components and advanced technologies show promise in meeting these goals. Pratt & Whitney Aircraft is conducting conceptual design studies of variable cycle engine concepts under NASA sponsorship. This paper reviews some of the design considerations for these engine concepts. Emphasis is placed on jet noise abatement, reduction of emissions, performance improvements, installation considerations, hot-section characteristics and control system requirements. Two representative variable cycle engine concepts that incorporate these basic design considerations are described.

A high-energy Compton polarimeter for the POET SMEX mission

NASA Astrophysics Data System (ADS)

Bloser, Peter F.; McConnell, Mark L.; Legere, Jason S.; Ertley, Camden D.; Hill, Joanne E.; Kippen, Marc; Ryan, James M.

2014-07-01

The primary science goal of the Polarimeters for Energetic Transients (POET) mission is to measure the polarization of gamma-ray bursts over a wide energy range, from X rays to soft gamma rays. The higher-energy portion of this band (50 - 500 keV) will be covered by the High Energy Polarimeter (HEP) instrument, a non-imaging, wide field of view Compton polarimeter. Incident high-energy photons will Compton scatter in low-Z, plastic scintillator detector elements and be subsequently absorbed in high-Z, CsI(Tl) scintillator elements; polarization is detected by measuring an asymmetry in the azimuthal scatter angle distribution. The HEP design is based on our considerable experience with the development and flight of the Gamma-Ray Polarimeter Experiment (GRAPE) balloon payload. We present the design of the POET HEP instrument, which incorporates lessons learned from the GRAPE balloon design and previous work on Explorer proposal efforts, and its expected performance on a two-year SMEX mission.

Lunar Navigation Architecture Design Considerations

NASA Technical Reports Server (NTRS)

D'Souza, Christopher; Getchius, Joel; Holt, Greg; Moreau, Michael

2009-01-01

The NASA Constellation Program is aiming to establish a long-term presence on the lunar surface. The Constellation elements (Orion, Altair, Earth Departure Stage, and Ares launch vehicles) will require a lunar navigation architecture for navigation state updates during lunar-class missions. Orion in particular has baselined earth-based ground direct tracking as the primary source for much of its absolute navigation needs. However, due to the uncertainty in the lunar navigation architecture, the Orion program has had to make certain assumptions on the capabilities of such architectures in order to adequately scale the vehicle design trade space. The following paper outlines lunar navigation requirements, the Orion program assumptions, and the impacts of these assumptions to the lunar navigation architecture design. The selection of potential sites was based upon geometric baselines, logistical feasibility, redundancy, and abort support capability. Simulated navigation covariances mapped to entry interface flightpath- angle uncertainties were used to evaluate knowledge errors. A minimum ground station architecture was identified consisting of Goldstone, Madrid, Canberra, Santiago, Hartebeeshoek, Dongora, Hawaii, Guam, and Ascension Island (or the geometric equivalent).

Radon in indoor air of primary schools: determinant factors, their variability and effective dose.

PubMed

Madureira, Joana; Paciência, Inês; Rufo, João; Moreira, André; de Oliveira Fernandes, Eduardo; Pereira, Alcides

2016-04-01

Radon is a radioactive gas, abundant in granitic areas, such as in the city of Porto at the north-east of Portugal. This gas is a recognized carcinogenic agent, being appointed by the World Health Organization as the leading cause of lung cancer after smoking. The aim of this preliminary survey was to determine indoor radon concentrations in public primary schools, to analyse the main factors influencing their indoor concentration levels and to estimate the effective dose in students and teachers in primary schools. Radon concentrations were measured in 45 classrooms from 13 public primary schools located in Porto, using CR-39 passive radon detectors for about 2-month period. In all schools, radon concentrations ranged from 56 to 889 Bq/m(3) (mean = 197 Bq/m(3)). The results showed that the limit of 100 Bq/m(3) established by WHO IAQ guidelines was exceeded in 92 % of the measurements, as well as 8 % of the measurements exceeded the limit of 400 Bq/m(3) established by the national legislation. Moreover, the mean annual effective dose was calculated as 1.25 mSv/y (ranging between 0.58 and 3.07 mSv/y), which is below the action level (3-10 mSv). The considerable variability of radon concentration observed between and within floors indicates a need to monitor concentrations in several rooms for each floor. A single radon detector for each room can be used, provided that the measurement error is considerably lower than variability of radon concentration between rooms. The results of the present survey will provide useful baseline data for adopting safety measures and dealing effectively with radiation emergencies. In particular, radon remediation techniques should be used in buildings located in the highest radon risk areas of Portugal. The results obtained in the current study concerning radon levels and their variations will be useful to optimize the design of future research surveys.

Design Considerations | Efficient Windows Collaborative

Science.gov Websites

Foundry Foundry New Construction Windows Window Selection Tool Selection Process Design Guidance Installation Replacement Windows Window Selection Tool Assessing Options Selection Process Design Guidance Installation Understanding Windows Benefits Design Considerations Measuring Performance Performance Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hugo, Jacques

The software application is called "HFE-Trace". This is an integrated method and tool for the management of Human Factors Engineering analyses and related data. Its primary purpose is to support the coherent and consistent application of the nuclear industry's best practices for human factors engineering work. The software is a custom Microsoft® Access® application. The application is used (in conjunction with other tools such as spreadsheets, checklists and normal documents where necessary) to collect data on the design of a new nuclear power plant from subject matter experts and other sources. This information is then used to identify potential systemmore » and functional breakdowns of the intended power plant design. This information is expanded by developing extensive descriptions of all functions, as well as system performance parameters, operating limits and constraints, and operational conditions. Once these have been verified, the human factors elements are added to each function, including intended operator role, function allocation considerations, prohibited actions, primary task categories, and primary work station. In addition, the application includes a computational method to assess a number of factors such as system and process complexity, workload, environmental conditions, procedures, regulations, etc.) that may shape operator performance. This is a unique methodology based upon principles described in NUREG/CR-3331 ("A methodology for allocating nuclear power plant control functions to human or automatic control") and it results in a semi-quantified allocation of functions to three or more levels of automation for a conceptual automation system. The aggregate of all this information is then linked to the Task Analysis section of the application where the existing information on all operator functions is transformed into task information and ultimately into design requirements for Human-System Interfaces and Control Rooms. This final step includes assessment of methods to prevent potential operator errors.« less

Design considerations for rechargeable lithium batteries

NASA Technical Reports Server (NTRS)

Shen, D. H.; Huang, C.-K.; Davies, E.; Perrone, D.; Surampudi, S.; Halpert, Gerald

1993-01-01

Viewgraphs of a discussion of design considerations for rechargable lithium batteries. The objective is to determine the influence of cell design parameters on the performance of Li-TiS2 cells. Topics covered include cell baseline design and testing, cell design and testing, cell design parameters studies, and cell cycling performance.

Expert opinion regarding the preparation of entry-level physiotherapists for primary healthcare practice, examined using Biggs 3P's model of teaching learning.

PubMed

McMahon, Sinead; O'Donoghue, Grainne; Doody, Catherine; O'Neill, Geraldine; Cusack, Tara

2016-05-01

The scope of contemporary physiotherapy practice is a critical factor in determining the appropriate educational preparation for physiotherapists now and into the future. The world-wide shift from secondary to primary healthcare has, and is, continuing to result in new and different ways of working. It is crucial that curricular changes reflect these developments. In this study a qualitative approach using Biggs 3P's - Pressage, Process and Product model to discuss curriculum design. The aim of the study was to explore the perspectives of both national and international physiotherapy educators/practitioners in primary healthcare, on the key elements required in physiotherapy education programmes to prepare future primary healthcare practitioners. Snowball sampling was used to identify experts in education and/or primary healthcare practice. Semi-structured interviews were conducted using an interview guide based on the Biggs 3P's model. Twelve participants were recruited from Ireland (n = 2), the UK (n = 4), Canada (n = 3), New Zealand (n = 2) and Australia (n = 1) using snowball sampling. Interviews were analysed using thematic analysis. Themes identified included; understanding the philosophy of physiotherapy practice, cultural competence, inter-disciplinary team working and communication skills. Contextual factors and teaching and learning strategies were discussed. There is an urgent need for physiotherapy education programmes to adopt the concept of primary healthcare as the basis for the physiotherapy curriculum and illuminate key components for consideration.

Conceptual design considerations and neutronics of lithium fall laser fusion target chambers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meier, W.R.; Thomson, W.B.

1978-05-31

Atomics International and Lawrence Livermore Laboratory are involved in the conceptual design of a laser fusion power plant incorporating the lithium fall target chamber. In this paper we discuss some of the more important design considerations for the target chamber and evaluate its nuclear performance. Sizing and configuration of the fall, hydraulic effects, and mechanical design considerations are addressed. The nuclear aspects examined include tritium breeding, energy deposition, and radiation damage.

Design Considerations of a Novel Two-Beam Accelerator

NASA Astrophysics Data System (ADS)

Luginsland, John William

This thesis reports the design study of a new type of charged particle accelerator called the Twobetron. The accelerator consists of two beams of electrons traveling through a series of pillbox cavities. The power of a high current annular beam excites an electromagnetic mode in the cavities, which, in turn, drives a low current on-axis pencil beam to high energy. We focus on the design considerations that would make use of existing pulsed power systems, for a proof-of-principle experiment. Potential applications of this new device include radiotherapy, materials processing, and high energy accelerators. The first phase of the research involves analytic description of the accelerating process. This reveals the problem of phase slippage. Derbenev's proposed cure of beam radius modulation is analyzed. Further studies include the effect of initial phase and secondary beam loading. Scaling laws to characterize the Twobetron's performance are derived. Computer simulation is performed to produce a self-consistent analysis of the dynamics of the space charge and its interaction with the accelerator structure. Particle -in-cell simulations answer several questions concerning beam stability, cavity modes, and the nature of the structure. Specifically, current modulation on the primary beam is preserved in the simulations. However, these simulations also revealed that mode competition and significant cavity coupling are serious issues that need to be addressed. Also considered is non-axisymmetric instability on the driver beam of the Twobetron, in particular, the beam breakup instability (BBU), which is known to pose a serious threat to linear accelerators in general. We extend the classical analysis of BBU to annular beams. The effect of higher order non-axisymmetric modes is also examined. It is shown that annular beams are more stable than pencil beams to BBU in general. Our analysis also reveals that the rf magnetic field is more important than the rf electric field in contributing to BBU growth. We next address the issue of primary beam modulation. Both particle-in-cell and analytic investigation showed that the usual relativistic klystron amplifiers (RKA) mechanism cannot provide full beam modulation at convenient levels of external rf drive. However, the recent discovery at the Air Force Phillips Laboratory of the injection locked relativistic klystron oscillator suggests that electromagnetic feedback between the driver cavity and the booster cavity might significantly enhance the current modulation. A simple model is constructed to analyze this cavity coupling and its mutual interaction with the primary beam. Quantitative agreement is found between our model and the Phillips Laboratory experiments. This analysis suggests that significant current modulation on the primary beam may be achieved with low level external rf drive.

Lightweight Thermoformed Structural Components and Optics

NASA Technical Reports Server (NTRS)

Zeiders, Glenn W.; Bradford, Larry J.

2004-01-01

A technique that involves the use of thermoformed plastics has been developed to enable the design and fabrication of ultra-lightweight structural components and mirrors for use in outer space. The technique could also be used to produce items for special terrestrial uses in which minimization of weight is a primary design consideration. Although the inherent strengths of thermoplastics are clearly inferior to those of metals and composite materials, thermoplastics offer a distinct advantage in that they can be shaped, at elevated temperatures, to replicate surfaces (e.g., prescribed mirror surfaces) precisely. Furthermore, multiple elements can be bonded into structures of homogeneous design that display minimal thermal deformation aside from simple expansion. The design aspect of the present technique is based on the principle that the deflection of a plate that has internal structure depends far more on the overall thickness than on the internal details; thus, a very stiff, light structure can be made from thin plastic that is heatformed to produce a sufficiently high moment of inertia. General examples of such structures include I beams and eggcrates.

Cognitive apprenticeship in health sciences education: a qualitative review.

PubMed

Lyons, Kayley; McLaughlin, Jacqueline E; Khanova, Julia; Roth, Mary T

2017-08-01

Cognitive apprenticeship theory emphasizes the process of making expert thinking "visible" to students and fostering the cognitive and meta-cognitive processes required for expertise. The purpose of this review was to evaluate the use of cognitive apprenticeship theory with the primary aim of understanding how and to what extent the theory has been applied to the design, implementation, and analysis of education in the health sciences. The initial search yielded 149 articles, with 45 excluded because they contained the term "cognitive apprenticeship" only in reference list. The remaining 104 articles were categorized using a theory talk coding scheme. An in depth qualitative synthesis and review was conducted for the 26 articles falling into the major theory talk category. Application of cognitive apprenticeship theory tended to focus on the methods dimension (e.g., coaching, mentoring, scaffolding), with some consideration for the content and sociology dimensions. Cognitive apprenticeship was applied in various disciplines (e.g., nursing, medicine, veterinary) and educational settings (e.g., clinical, simulations, online). Health sciences education researchers often used cognitive apprenticeship to inform instructional design and instrument development. Major recommendations from the literature included consideration for contextual influences, providing faculty development, and expanding application of the theory to improve instructional design and student outcomes. This body of research provides critical insight into cognitive apprenticeship theory and extends our understanding of how to develop expert thinking in health sciences students. New research directions should apply the theory into additional aspects of health sciences educational research, such as classroom learning and interprofessional education.

Comparison of designed and randomly generated catalysts for simple chemical reactions.

PubMed

Kipnis, Yakov; Baker, David

2012-09-01

There has been recent success in designing enzymes for simple chemical reactions using a two-step protocol. In the first step, a geometric matching algorithm is used to identify naturally occurring protein scaffolds at which predefined idealized active sites can be realized. In the second step, the residues surrounding the transition state model are optimized to increase transition state binding affinity and to bolster the primary catalytic side chains. To improve the design methodology, we investigated how the set of solutions identified by the design calculations relate to the overall set of solutions for two different chemical reactions. Using a TIM barrel scaffold in which catalytically active Kemp eliminase and retroaldolase designs were obtained previously, we carried out activity screens of random libraries made to be compositionally similar to active designs. A small number of active catalysts were found in screens of 10³ variants for each of the two reactions, which differ from the computational designs in that they reuse charged residues already present in the native scaffold. The results suggest that computational design considerably increases the frequency of catalyst generation for active sites involving newly introduced catalytic residues, highlighting the importance of interaction cooperativity in enzyme active sites. Copyright © 2012 The Protein Society.

Prevention of hospital-acquired thrombosis from a primary care perspective: a qualitative study

PubMed Central

Litchfield, Ian; Fitzmaurice, David; Apenteng, Patricia; Harrison, Sian; Heneghan, Carl; Ward, Alison; Greenfield, Sheila

2016-01-01

Background Although there is considerable risk for patients from hospital-acquired thrombosis (HAT), current systems for reducing this risk appear inefficient and have focused predominantly on secondary care, leaving the role of primary care underexplored, despite the onset of HAT often occurring post-discharge. Aim To gain an understanding of the perspectives of primary care clinicians on their contribution to the prevention of HAT. Their current role, perceptions of patient awareness, the barriers to better care, and suggestions for how these may be overcome were discussed. Design and setting Qualitative study using semi-structured interviews in Oxfordshire and South Birmingham, England. Method Semi-structured telephone interviews with clinicians working at practices of a variety of size, socioeconomic status, and geographical location. Results A number of factors that influenced the management of HAT emerged, including patient characteristics, a lack of clarity of responsibility, limited communication and poor coordination, and the constraints of limited practice resources. Suggestions for improving the current system include a broader role for primary care supported by appropriate training and the requisite funding. Conclusion The role of primary care remains limited, despite being ideally positioned to either raise patient awareness before admission or support patient adherence to the thromboprophylaxis regimen prescribed in hospital. This situation may begin to be addressed by more robust lines of communication between secondary and primary care and by providing more consistent training for primary care staff. In turn, this relies on the allocation of appropriate funds to allow practices to meet the increased demand on their time and resources. PMID:27266864

Discontinuing Pneumocystis jirovecii Pneumonia Prophylaxis in HIV-Infected Patients With a CD4 Cell Count <200 cells/mm3.

PubMed

Sidhu, Vaninder K; Foisy, Michelle M; Hughes, Christine A

2015-12-01

To review the evidence for discontinuing primary and secondary Pneumocystis jirovecii pneumonia (PJP) prophylaxis in HIV-infected patients with a CD4 count <200 cells/mm(3). We conducted a literature search in MEDLINE, EMBASE, Cochrane Library, Google Scholar, and the International Aids Society Library (up to August 2015) using the following key search terms: Pneumocystis jirovecii, pneumonia, human immunodeficiency virus, primary prophylaxis, secondary prophylaxis, and discontinuation. All English-language studies that evaluated discontinuation of primary and/or secondary PJP prophylaxis in HIV-infected patients with CD4 count <200 cells/mm(3) were included. Five studies were identified, which varied in design, sample size, outcomes, and duration of follow-up. Three studies examined discontinuation of primary and secondary PJP prophylaxis; 1 study evaluated discontinuing primary PJP prophylaxis; and 1 study evaluated stopping secondary PJP prophylaxis. Two out of the 5 studies pooled data for all opportunistic infections. Overall, there was a low incidence of PJP among HIV-infected patients who discontinued primary PJP prophylaxis and were well controlled on antiretroviral therapy (ART). Discontinuation of primary PJP prophylaxis appears to be safe in patients on combination ART with a suppressed HIV viral load and a CD4 count >100 cells/mm(3). Additional data are needed to support the safety of discontinuing secondary PJP prophylaxis. Decisions to discontinue PJP prophylaxis in patients with a CD4 count <200 cells/mm(3) should be done on an individual patient basis, taking into consideration clinical factors, including ongoing adherence to ART. © The Author(s) 2015.

Design of a Blended Learning Environment: Considerations and Implementation Issues

ERIC Educational Resources Information Center

Gedik, Nuray; Kiraz, Ercan; Ozden, M. Yasar

2013-01-01

This study identified critical issues in the design of a blended learning environment by examining basic design considerations and implementation issues. Following a design-based research approach with the phenomenological tradition of qualitative research, the study investigated instructor experiences relating to the design, development, and…

Primary School Leadership Practice: How the Subject Matters

ERIC Educational Resources Information Center

Spillane, James P.

2005-01-01

Teaching is a critical consideration in investigations of primary school leadership and not just as an outcome variable. Factoring in instruction as an explanatory variable in scholarship on school leadership involves moving away from views of teaching as a monolithic or unitary practice. When it comes to leadership in primary schools, the subject…

Real-time feedback on nonverbal clinical communication. Theoretical framework and clinician acceptance of ambient visual design.

PubMed

Hartzler, A L; Patel, R A; Czerwinski, M; Pratt, W; Roseway, A; Chandrasekaran, N; Back, A

2014-01-01

This article is part of the focus theme of Methods of Information in Medicine on "Pervasive Intelligent Technologies for Health". Effective nonverbal communication between patients and clinicians fosters both the delivery of empathic patient-centered care and positive patient outcomes. Although nonverbal skill training is a recognized need, few efforts to enhance patient-clinician communication provide visual feedback on nonverbal aspects of the clinical encounter. We describe a novel approach that uses social signal processing technology (SSP) to capture nonverbal cues in real time and to display ambient visual feedback on control and affiliation--two primary, yet distinct dimensions of interpersonal nonverbal communication. To examine the design and clinician acceptance of ambient visual feedback on nonverbal communication, we 1) formulated a model of relational communication to ground SSP and 2) conducted a formative user study using mixed methods to explore the design of visual feedback. Based on a model of relational communication, we reviewed interpersonal communication research to map nonverbal cues to signals of affiliation and control evidenced in patient-clinician interaction. Corresponding with our formulation of this theoretical framework, we designed ambient real-time visualizations that reflect variations of affiliation and control. To explore clinicians' acceptance of this visual feedback, we conducted a lab study using the Wizard-of-Oz technique to simulate system use with 16 healthcare professionals. We followed up with seven of those participants through interviews to iterate on the design with a revised visualization that addressed emergent design considerations. Ambient visual feedback on non- verbal communication provides a theoretically grounded and acceptable way to provide clinicians with awareness of their nonverbal communication style. We provide implications for the design of such visual feedback that encourages empathic patient-centered communication and include considerations of metaphor, color, size, position, and timing of feedback. Ambient visual feedback from SSP holds promise as an acceptable means for facilitating empathic patient-centered nonverbal communication.

Design considerations for composite fuselage structure of commercial transport aircraft

NASA Technical Reports Server (NTRS)

Davis, G. W.; Sakata, I. F.

1981-01-01

The structural, manufacturing, and service and environmental considerations that could impact the design of composite fuselage structure for commercial transport aircraft application were explored. The severity of these considerations was assessed and the principal design drivers delineated. Technical issues and potential problem areas which must be resolved before sufficient confidence is established to commit to composite materials were defined. The key issues considered are: definition of composite fuselage design specifications, damage tolerance, and crashworthiness.

ADHD in school-aged youth: Management and special treatment considerations in the primary care setting.

PubMed

Weed, Elizabeth D

Attention-deficit/hyperactivity disorder is considered one of the most common neurodevelopmental disorders of childhood. Primary care providers are in the unique position of providing comprehensive care-routine care, well child visits, immunizations, and other healthcare needs-to a majority of children and adolescents with attention-deficit/hyperactivity disorder. As such, primary care providers are pivotal in the diagnosis, management, and treatment of this population. This article will address special treatment considerations to aid in the management of attention-deficit/hyperactivity disorder in the primary care setting, including substance use disorders and diversion, cardiac issues and stimulant medication, medication holidays and follow-up monitoring. The database of PubMed was searched using keywords that included attention-deficit/hyperactivity disorder, children, prevalence, medication holidays, safety, cardiovascular, cardiac, blood pressure, substance use, diversion, adverse drug reactions; inclusion dates were January 1, 2011 to September 30, 2015. © The Author(s) 2016.

Security Approaches in Using Tablet Computers for Primary Data Collection in Clinical Research

PubMed Central

Wilcox, Adam B.; Gallagher, Kathleen; Bakken, Suzanne

2013-01-01

Next-generation tablets (iPads and Android tablets) may potentially improve the collection and management of clinical research data. The widespread adoption of tablets, coupled with decreased software and hardware costs, has led to increased consideration of tablets for primary research data collection. When using tablets for the Washington Heights/Inwood Infrastructure for Comparative Effectiveness Research (WICER) project, we found that the devices give rise to inherent security issues associated with the potential use of cloud-based data storage approaches. This paper identifies and describes major security considerations for primary data collection with tablets; proposes a set of architectural strategies for implementing data collection forms with tablet computers; and discusses the security, cost, and workflow of each strategy. The paper briefly reviews the strategies with respect to their implementation for three primary data collection activities for the WICER project. PMID:25848559

Security approaches in using tablet computers for primary data collection in clinical research.

PubMed

Wilcox, Adam B; Gallagher, Kathleen; Bakken, Suzanne

2013-01-01

Next-generation tablets (iPads and Android tablets) may potentially improve the collection and management of clinical research data. The widespread adoption of tablets, coupled with decreased software and hardware costs, has led to increased consideration of tablets for primary research data collection. When using tablets for the Washington Heights/Inwood Infrastructure for Comparative Effectiveness Research (WICER) project, we found that the devices give rise to inherent security issues associated with the potential use of cloud-based data storage approaches. This paper identifies and describes major security considerations for primary data collection with tablets; proposes a set of architectural strategies for implementing data collection forms with tablet computers; and discusses the security, cost, and workflow of each strategy. The paper briefly reviews the strategies with respect to their implementation for three primary data collection activities for the WICER project.

Evaluation of total purchasing pilots in England and Scotland and implications for primary care groups in England: personal interviews and analysis of routine data

PubMed Central

Goodwin, Nicholas; Mays, Nicholas; McLeod, Hugh; Malbon, Gill; Raftery, James

1998-01-01

Objectives: To evaluate the reported achievements of the 52 first wave total purchasing pilot schemes in 1996-7 and the factors associated with these; and to consider the implications of these findings for the development of the proposed primary care groups. Design: Face to face interviews with lead general practitioners, project managers, and health authority representatives responsible for each pilot; and analysis of hospital episode statistics. Setting: England and Scotland for evaluation of pilots; England only for consideration of implications for primary care groups. Main outcome measures: The ability of total purchasers to achieve their own objectives and their ability specifically to achieve objectives in the service areas beyond fundholding included in total purchasing. Results: The level of achievement between pilots varied widely. Achievement was more likely to be reported in primary than in secondary care. Reported achievements in reducing length of stay and emergency admissions were corroborated by analysis of hospital episode statistics. Single practice and small multipractice pilots were more likely than large multipractice projects to report achieving their objectives. Achievements were also associated with higher direct management costs per head and the ability to undertake independent contracting. Large multipractice pilots required considerable organisational development before progress could be made. Conclusion: The ability to create effective commissioning organisations the size of the proposed primary care groups should not be underestimated. To be effective commissioners, these care groups will need to invest heavily in their organisational development and in the short term are likely to need an additional development budget rather than the reduction in spending on NHS management that is planned by the government. Key messages The level of reported achievement between the total purchasing pilots in 1996-7 varied widely; achievement was more likely to occur in primary than in secondary care Single practice and small multipractice pilots were more likely than large multipractice pilots to report achieving their objectives in 1996/97; achievements were also associated with higher direct management costs per head Large multipractice pilots needed more time for organisational development before progress could be made Difficulties in creating effective commissioning organisations the size of the proposed primary care groups should not be underestimated Primary care groups will need to invest heavily in organisational development and are likely to need an additional development budget in the short term PMID:9677217

Building quality mHealth for low resource settings.

PubMed

Ettinger, Kate Michi; Pharaoh, Hamilton; Buckman, Reymound Yaw; Conradie, Hoffie; Karlen, Walter

In low- and middle-income countries (LMIC), community health care workers (CHCW) are the primary point of care for millions of people. Mobile phone health applications (mHealth app) are the preferred technology platform to deliver clinical support to CHCW. In LMIC, limited regulatory oversight exists to guide quality and safety for medical devices, including mHealth. During the development of a mHealth app to assist CHCW with patient assessment and clinical diagnosis in rural South Africa, we applied human-centred design (HCD) and a bioethics consultation. The HCD approach enabled us to develop a mHealth app that responded to the needs and capacities of CHCW. The bioethics consultation prompted early consideration of safety concerns, social implications of our mHealth app and our technology's impact on the CHCW-patient relationship. In this study, we found that combining a HCD approach with bioethics consultation improved the design quality and reduced safety concerns for our mHealth app.

Design and simulation of EVA tools and robot end effectors for servicing missions of the HST

NASA Technical Reports Server (NTRS)

Naik, Dipak; Dehoff, P. H.

1995-01-01

The Hubble Space Telescope (HST) was launched into near-earth orbit by the Space Shuttle Discovery on April 24, 1990. The payload of two cameras, two spectrographs, and a high-speed photometer is supplemented by three fine-guidance sensors that can be used for astronomy as well as for star tracking. A widely reported spherical aberration in the primary mirror causes HST to produce images of much lower quality than intended. A Space Shuttle repair mission in January 1994 installed small corrective mirrors that restored the full intended optical capability of the HST. A Second Servicing Mission (SM2) scheduled in 1997 will involve considerable Extra Vehicular Activity (EVA). To reduce EVA time, the addition of robotic capability in the remaining servicing missions has been proposed. Toward that end, two concept designs for a general purpose end effector for robots are presented in this report.

Solid state recording current meter conversion

USGS Publications Warehouse

Cheng, Ralph T.; Wang, Lichen

1985-01-01

The authors describe the conversion of an Endeco-174 current meter to a solid-state recording current meter. A removable solid-state module was designed to fit in the space originally occupied by an 8-track tape cartridge. The module contains a CPU and 128 kilobytes of nonvolatile CMOS memory. The solid-state module communicates with any terminal or computer using an RS-232C interface at 4800 baud rate. A primary consideration for conversion was to keep modifications of the current meter to a minimum. The communication protocol was designed to emulate the Endeco tape translation unit, thus the need for a translation unit was eliminated and the original data reduction programs can be used without any modification. After conversion, the data recording section of the current meter contains no moving parts; the storage capacity of the module is equivalent to that of the original tape cartridge.

Test and Analysis of a Buckling-Critical Large-Scale Sandwich Composite Cylinder

NASA Technical Reports Server (NTRS)

Schultz, Marc R.; Sleight, David W.; Gardner, Nathaniel W.; Rudd, Michelle T.; Hilburger, Mark W.; Palm, Tod E.; Oldfield, Nathan J.

2018-01-01

Structural stability is an important design consideration for launch-vehicle shell structures and it is well known that the buckling response of such shell structures can be very sensitive to small geometric imperfections. As part of an effort to develop new buckling design guidelines for sandwich composite cylindrical shells, an 8-ft-diameter honeycomb-core sandwich composite cylinder was tested under pure axial compression to failure. The results from this test are compared with finite-element-analysis predictions and overall agreement was very good. In particular, the predicted buckling load was within 1% of the test and the character of the response matched well. However, it was found that the agreement could be improved by including composite material nonlinearity in the analysis, and that the predicted buckling initiation site was sensitive to the addition of small bending loads to the primary axial load in analyses.

Design and simulation of EVA tools for first servicing mission of HST

NASA Technical Reports Server (NTRS)

Naik, Dipak; Dehoff, P. H.

1993-01-01

The Hubble Space Telescope (HST) was launched into near-earth orbit by the space shuttle Discovery on April 24, 1990. The payload of two cameras, two spectrographs, and a high-speed photometer is supplemented by three fine-guidance sensors that can be used for astronomy as well as for star tracking. A widely reported spherical aberration in the primary mirror causes HST to produce images of much lower quality than intended. A space shuttle repair mission in late 1993 will install small corrective mirrors that will restore the full intended optical capability of the HST. The first servicing mission (FSM) will involve considerable extravehicular activity (EVA). It is proposed to design special EVA tools for the FSM. This report includes details of the data acquisition system being developed to test the performance of the various EVA tools in ambient as well as simulated space environment.

Planar LTCC transformers for high voltage flyback converters: Part II.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schofield, Daryl; Schare, Joshua M., Ph.D.; Slama, George

This paper is a continuation of the work presented in SAND2007-2591 'Planar LTCC Transformers for High Voltage Flyback Converters'. The designs in that SAND report were all based on a ferrite tape/dielectric paste system originally developed by NASCENTechnoloy, Inc, who collaborated in the design and manufacturing of the planar LTCC flyback converters. The output/volume requirements were targeted to DoD application for hard target/mini fuzing at around 1500 V for reasonable primary peak currents. High voltages could be obtained but with considerable higher current. Work had begun on higher voltage systems and is where this report begins. Limits in material propertiesmore » and processing capabilities show that the state-of-the-art has limited our practical output voltage from such a small part volume. In other words, the technology is currently limited within the allowable funding and interest.« less

Effect of Axially Staged Fuel Introduction on Performance of One-quarter Sector of Annular Turbojet Combustor

NASA Technical Reports Server (NTRS)

Zettle, Eugene V; Mark, Herman

1953-01-01

The design principle of injecting liquid fuel at more than one axial station in an annual turbojet combustor was investigated. Fuel was injected into the combustor as much as 5 inches downstream of the primary fuel injectors. Many fuel-injection configurations were examined and the performance results are presented for 11 configurations that best demonstrate the trends in performance obtained. The performance investigations were made at a constant combustor-inlet pressure of 15 inches of mercury absolute and at air flows up to 70 percent higher than values typical of current design practice. At these higher air flows, staging the fuel introduction improved the combustion efficiency considerably over that obtained in the combustor when no fuel staging was employed. At air flows currently encountered in turbojet engines, fuel staging was of minor value. Radial temperature distribution seemed relatively unaffected by the location of fuel-injection stations.

X ray microscope assembly and alignment support and advanced x ray microscope design and analysis

NASA Technical Reports Server (NTRS)

Shealy, David L.

1991-01-01

Considerable efforts have been devoted recently to the design, analysis, fabrication, and testing of spherical Schwarzschild microscopes for soft x ray application in microscopy and projection lithography. The spherical Schwarzschild microscope consists of two concentric spherical mirrors configured such that the third order spherical aberration and coma are zero. Since multilayers are used on the mirror substrates for x ray applications, it is desirable to have only two reflecting surfaces in a microscope. In order to reduce microscope aberrations and increase the field of view, generalized mirror surface profiles have been considered in this investigation. Based on incoherent and sine wave modulation transfer function (MTF) calculations, the object plane resolution of a microscope has been analyzed as a function of the object height and numerical aperture (NA) of the primary for several spherical Schwarzschild, conic, and aspherical head reflecting two mirror microscope configurations.

GPU-accelerated simulations of isolated black holes

NASA Astrophysics Data System (ADS)

Lewis, Adam G. M.; Pfeiffer, Harald P.

2018-05-01

We present a port of the numerical relativity code SpEC which is capable of running on NVIDIA GPUs. Since this code must be maintained in parallel with SpEC itself, a primary design consideration is to perform as few explicit code changes as possible. We therefore rely on a hierarchy of automated porting strategies. At the highest level we use TLoops, a C++ library of our design, to automatically emit CUDA code equivalent to tensorial expressions written into C++ source using a syntax similar to analytic calculation. Next, we trace out and cache explicit matrix representations of the numerous linear transformations in the SpEC code, which allows these to be performed on the GPU using pre-existing matrix-multiplication libraries. We port the few remaining important modules by hand. In this paper we detail the specifics of our port, and present benchmarks of it simulating isolated black hole spacetimes on several generations of NVIDIA GPU.

THE CASE FOR A TYPHOID VACCINE PROBE STUDY AND OVERVIEW OF DESIGN ELEMENTS

PubMed Central

Halloran, M. Elizabeth; Khan, Imran

2015-01-01

Recent advances in typhoid vaccine, and consideration of support from Gavi, the Vaccine Alliance, raise the possibility that some endemic countries will introduce typhoid vaccine into public immunization programs. This decision, however, is limited by lack of definitive information on disease burden. We propose use of a vaccine probe study approach. This approach would more clearly assess the total burden of typhoid across different syndromic groups and account for lack of access to care, poor diagnostics, incomplete laboratory testing, lack of mortality and intestinal perforation surveillance, and increasing antibiotic resistance. We propose a cluster randomized trial design using a mass immunization campaign among all age groups, with monitoring over a 4-year period of a variety of outcomes. The primary outcome would be the vaccine preventable disease incidence of prolonged fever hospitalization. Sample size calculations suggest that such a study would be feasible over a reasonable set of assumptions. PMID:25912286

Assessment of Alternative RF Linac Structures for APT

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The APT program has been examining both normal and superconducting variants of the APT linac for the past two years. A decision on which of the two will be the selected technology will depend upon several considerations including the results of ongoing feasibility experiments, the performance and overall attractiveness of each of the design concepts, and an assessment of the system-level features of both alternatives. The primary objective of the Assessment of Alternative RF Linac Structures for APT study reported herein was to assess and compare, at the system-level, the performance, capital and life cycle costs, reliability/availability/maintainability (RAM) and manufacturingmore » schedules of APT RF linear accelerators based upon both superconducting and normal conducting technologies. A secondary objective was to perform trade studies to explore opportunities for system optimization, technology substitution and alternative growth pathways and to identify sensitivities to design uncertainties.« less

Molecular-based design and emerging applications of nanoporous carbon spheres

NASA Astrophysics Data System (ADS)

Liu, Jian; Wickramaratne, Nilantha P.; Qiao, Shi Zhang; Jaroniec, Mietek

2015-08-01

Over the past decade, considerable progress has been made in the synthesis and applications of nanoporous carbon spheres ranging in size from nanometres to micrometres. This Review presents the primary techniques for preparing nanoporous carbon spheres and the seminal research that has inspired their development, presented potential applications and uncovered future challenges. First we provide an overview of the synthesis techniques, including the Stöber method and those based on templating, self-assembly, emulsion and hydrothermal carbonization, with special emphasis on the design and functionalization of nanoporous carbon spheres at the molecular level. Next, we cover the key applications of these spheres, including adsorption, catalysis, separation, energy storage and biomedicine -- all of which might benefit from the regular geometry, good liquidity, tunable porosity and controllable particle-size distribution offered by nanoporous carbon spheres. Finally, we present the current challenges and opportunities in the development and commercial applications of nanoporous carbon spheres.

Molecular-based design and emerging applications of nanoporous carbon spheres.

PubMed

Liu, Jian; Wickramaratne, Nilantha P; Qiao, Shi Zhang; Jaroniec, Mietek

2015-08-01

Over the past decade, considerable progress has been made in the synthesis and applications of nanoporous carbon spheres ranging in size from nanometres to micrometres. This Review presents the primary techniques for preparing nanoporous carbon spheres and the seminal research that has inspired their development, presented potential applications and uncovered future challenges. First we provide an overview of the synthesis techniques, including the Stöber method and those based on templating, self-assembly, emulsion and hydrothermal carbonization, with special emphasis on the design and functionalization of nanoporous carbon spheres at the molecular level. Next, we cover the key applications of these spheres, including adsorption, catalysis, separation, energy storage and biomedicine — all of which might benefit from the regular geometry, good liquidity, tunable porosity and controllable particle-size distribution offered by nanoporous carbon spheres. Finally, we present the current challenges and opportunities in the development and commercial applications of nanoporous carbon spheres.

Turbine Research Program Cold Weather Turbine Project: Period of Performance May 27, 1999 -- March 31, 2004

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lynch, J.; Bywaters, G.; Costin, D.

2004-08-01

Northern Power Systems completed the Cold Weather Turbine (CWT) project, which was funded by the National Renewable Energy Laboratory (NREL), under subcontract XAT-9-29200-01. The project's primary goal is to develop a 100-kW wind turbine suited for deployment in remote villages in cold regions. The contract required testing and certification of the turbine to the International Electrotechnical Commission (IEC) 61400-1 international standard through Underwriters Laboratories (UL). The contract also required Northern Power Systems to study design considerations for operation in extreme cold (-80F at the South Pole, for example). The design was based on the successful proof of concept (POC) turbinemore » (developed under NREL and NASA contracts), considered the prototype turbine that would be refined and manufactured to serve villages in cold regions around the world.« less

Test plan : I-40 TTIS focus groups and personal interview

DOT National Transportation Integrated Search

1976-04-01

This provides specific design recommendations, design considerations, and construction techniques for the construction of lateral support systems and underpinning. The design considerations are presented for each technique or method (solider piles, s...

Advanced Technology Composite Fuselage - Repair and Damage Assessment Supporting Maintenance

NASA Technical Reports Server (NTRS)

Flynn, B. W.; Bodine, J. B.; Dopker, B.; Finn, S. R.; Griess, K. H.; Hanson, C. T.; Harris, C. G.; Nelson, K. M.; Walker, T. H.; Kennedy, T. C.;

12 CFR 1320.10 - Factors for consideration in designations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... FINANCIAL MARKET UTILITIES Consultations, Determinations and Hearings § 1320.10 Factors for consideration in designations. In making any proposed or final determination with respect to whether a financial market utility... consideration: (a) The aggregate monetary value of transactions processed by the financial market utility...

12 CFR 1320.10 - Factors for consideration in designations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... MARKET UTILITIES Consultations, Determinations and Hearings § 1320.10 Factors for consideration in designations. In making any proposed or final determination with respect to whether a financial market utility... consideration: (a) The aggregate monetary value of transactions processed by the financial market utility...

12 CFR 1320.10 - Factors for consideration in designations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... MARKET UTILITIES Consultations, Determinations and Hearings § 1320.10 Factors for consideration in designations. In making any proposed or final determination with respect to whether a financial market utility... consideration: (a) The aggregate monetary value of transactions processed by the financial market utility...

Addressing the determinants of child mental health: intersectionality as a guide to primary health care renewal.

PubMed

McPherson, Charmaine M; McGibbon, Elizabeth A

2010-09-01

Primary health care (PHC) renewal was designed explicitly to attend to the multidimensional factors impacting on health, including the social determinants of health. These determinants are central considerations in the development of integrated, cross-sectoral, and multi-jurisdictional policies such as those that inform models of shared mental health care for children. However, there are complex theoretical challenges in translating these multidimensional issues into policy. One of these is the rarely discussed interrelationships among the social determinants of health and identities such as race, gender, age, sexuality, and social class within the added confluence of geographic contexts. An intersectionality lens is used to examine the complex interrelationships among the factors affecting child mental health and the associated policy challenges surrounding PHC renewal. The authors argue that an understanding of the intersections of social determinants of health, identity, and geography is pivotal in guiding policy-makers as they address child mental health inequities using a PHC renewal agenda.

Management of nipple discharge and the associated imaging findings.

PubMed

Patel, Bhavika K; Falcon, Shannon; Drukteinis, Jennifer

2015-04-01

Nipple discharge is commonly encountered by health care providers, accounting for 2%-5% of medical visits by women. Because nipple discharge is the presenting symptom in 5% to 12% of breast cancers, it causes considerable anxiety for both patient and providers. Furthermore, the work-up and management of nipple discharge can be confusing. Fortunately, the cause of nipple discharge is usually benign, so the primary goal of evaluation and management is separation of patients with pathologic causes of discharge from those with benign or physiologic causes. The evaluation of nipple discharge requires a thorough history, careful physical examination, and an informed approach that selects the most suitable diagnostic modality. Primary care providers, working with their radiologists and surgeons, are well positioned to design appropriate diagnostic and management protocols to assess and treat nipple discharge. A thoughtful and prudent approach to nipple discharge should alleviate patient anxiety by efficiently and effectively defining the underlying etiology. Copyright © 2015 Elsevier Inc. All rights reserved.

Health systems research in a low income country - easier said than done

PubMed Central

English, Mike; Irimu, Grace; Wamae, Annah; Were, Fred; Wasunna, Aggrey; Fegan, Greg; Peshu, Norbert

2009-01-01

Summary Small hospitals sit at the apex of the pyramid of primary care in many low-income country health systems. If the Millennium Development Goal for child survival is to be achieved hospital care for severely ill, referred children will need to be improved considerably in parallel with primary care in many countries. Yet we know little about how to achieve this. We describe the evolution and final design of an intervention study attempting to improve hospital care for children in Kenyan district hospitals. We believe our experience illustrates many of the difficulties involved in reconciling epidemiological rigour and feasibility in studies at a health system rather than an individual level and the importance of the depth and breadth of analysis when trying to provide a plausible answer to the question - does it work? While there are increasing calls for more health systems research in low-income countries the importance of strong, broadly-based local partnerships and long term commitment even to initiate projects are not always appreciated. PMID:18495913

Highly efficient maximum power point tracking using DC-DC coupled inductor single-ended primary inductance converter for photovoltaic power systems

NASA Astrophysics Data System (ADS)

Quamruzzaman, M.; Mohammad, Nur; Matin, M. A.; Alam, M. R.

2016-10-01

Solar photovoltaics (PVs) have nonlinear voltage-current characteristics, with a distinct maximum power point (MPP) depending on factors such as solar irradiance and operating temperature. To extract maximum power from the PV array at any environmental condition, DC-DC converters are usually used as MPP trackers. This paper presents the performance analysis of a coupled inductor single-ended primary inductance converter for maximum power point tracking (MPPT) in a PV system. A detailed model of the system has been designed and developed in MATLAB/Simulink. The performance evaluation has been conducted on the basis of stability, current ripple reduction and efficiency at different operating conditions. Simulation results show considerable ripple reduction in the input and output currents of the converter. Both the MPPT and converter efficiencies are significantly improved. The obtained simulation results validate the effectiveness and suitability of the converter model in MPPT and show reasonable agreement with the theoretical analysis.

Do Poverty Dynamics Explain the Shift to an Informal Private Schooling System in the Wake of Free Public Primary Education in Nairobi Slums?

ERIC Educational Resources Information Center

Oketch, Moses; Mutisya, Maurice; Sagwe, Jackline

2012-01-01

With the introduction of free primary education (FPE) in Kenya in 2003, it was expected that the burden on poor households in financing primary education would be reduced substantially. This in turn would increase enrolment in public schools and lead to universal primary education. However, studies have shown that a considerable proportion of…

What can organizations do to improve family physicians’ interprofessional collaboration?

PubMed Central

Perreault, Kadija; Pineault, Raynald; Da Silva, Roxane Borgès; Provost, Sylvie; Feldman, Debbie E.

2017-01-01

Abstract Objective To assess the degree of collaboration in primary health care organizations between FPs and other health care professionals; and to identify organizational factors associated with such collaboration. Design Cross-sectional survey. Setting Primary health care organizations in the Montreal and Monteregie regions of Quebec. Participants Physicians or administrative managers from 376 organizations. Main outcome measures Degree of collaboration between FPs and other specialists and between FPs and nonphysician health professionals. Results Almost half (47.1%) of organizations reported a high degree of collaboration between FPs and other specialists, but a high degree of collaboration was considerably less common between FPs and nonphysician professionals (16.5%). Clinic collaboration with a hospital and having more patients with at least 1 chronic disease were associated with higher FP collaboration with other specialists. The proportion of patients with at least 1 chronic disease was the only factor associated with collaboration between FPs and nonphysician professionals. Conclusion There is room for improvement regarding interprofessional collaboration in primary health care, especially between FPs and nonphysician professionals. Organizations that manage patients with more chronic diseases collaborate more with both non-FP specialists and nonphysician professionals. PMID:28904048

Trapping and patterning of large particles and cells in a 1D ultrasonic standing wave.

PubMed

Habibi, Ruhollah; Devendran, Citsabehsan; Neild, Adrian

2017-09-26

The use of ultrasound for trapping and patterning particles or cells in microfluidic systems is usually confined to particles which are considerably smaller than the acoustic wavelength. In this regime, the primary forces result in particle clustering at certain locations in the sound field, whilst secondary forces, those arising due to particle-particle interaction forces, assist this clustering process. Using a wavelength closer to the size of the particles allows one particle to be held at each primary force minimum. However, to achieve this, the influence of secondary forces needs to be carefully studied, as inter-particle attraction is highly undesirable. Here, we study the effect of particle size and material properties on both the primary and secondary acoustic forces as the particle diameter is increased towards the wavelength of the 1-dimensional axisymmetric ultrasonic field. We show that the resonance frequencies of the solid sphere have an important role in the resulting secondary forces which leads to a narrow band of frequencies that allow the patterning of large particles in a 1-D array. Knowledge regarding the naturally existent secondary forces would allow for system designs enabling single cell studies to be conducted in a biologically safe manner.

The Draft National Curriculum for Primary Mathematics

ERIC Educational Resources Information Center

Thompson, Ian

2012-01-01

Draft curriculum documents offer a glimpse of the future. They demand a response as all too often the devil is in the detail. What are the devils and maybe demons that await primary mathematics? This forensic consideration of the content of the draft curriculum for primary mathematics catalogues a lack of evidence to underpin proposals. Is the…

The detection and analysis of point processes in biological signals

NASA Technical Reports Server (NTRS)

Anderson, D. J.; Correia, M. J.

1977-01-01

A pragmatic approach to the detection and analysis of discrete events in biomedical signals is taken. Examples from both clinical and basic research are provided. Introductory sections discuss not only discrete events which are easily extracted from recordings by conventional threshold detectors but also events embedded in other information carrying signals. The primary considerations are factors governing event-time resolution and the effects limits to this resolution have on the subsequent analysis of the underlying process. The analysis portion describes tests for qualifying the records as stationary point processes and procedures for providing meaningful information about the biological signals under investigation. All of these procedures are designed to be implemented on laboratory computers of modest computational capacity.

Selected tether applications in space: An analysis of five selected concepts

NASA Technical Reports Server (NTRS)

1984-01-01

Ground rules and assumptions; operations; orbit considerations/dynamics; tether system design and dynamics; functional requirements; hardware concepts; and safety factors are examined for five scenarios: tethered effected separation of an Earth bound shuttle from the space station; tether effected orbit boost of a spacecraft (AXAF) into its operational orbit from the shuttle; an operational science/technology platform tether deployed from space station; a tether mediated rendezvous involving an OMV tether deployed from space station to rendezvous with an aerobraked OTV returning to geosynchronous orbit from a payload delivery mission; and an electrodynamic tether used in a dual motor/generator mode to serve as the primary energy storage facility for space station.

Upgrades to the NESS (Nuclear Engine System Simulation) Code

NASA Technical Reports Server (NTRS)

Fittje, James E.

2007-01-01

In support of the President's Vision for Space Exploration, the Nuclear Thermal Rocket (NTR) concept is being evaluated as a potential propulsion technology for human expeditions to the moon and Mars. The need for exceptional propulsion system performance in these missions has been documented in numerous studies, and was the primary focus of a considerable effort undertaken during the 1960's and 1970's. The NASA Glenn Research Center is leveraging this past NTR investment in their vehicle concepts and mission analysis studies with the aid of the Nuclear Engine System Simulation (NESS) code. This paper presents the additional capabilities and upgrades made to this code in order to perform higher fidelity NTR propulsion system analysis and design.

Immersion Cooling of Electronics in DoD Installations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coles, Henry; Herrlin, Magnus

A considerable amount of energy is consumed to cool electronic equipment in data centers. A method for substantially reducing the energy needed for this cooling was demonstrated. The method involves immersing electronic equipment in a non-conductive liquid that changes phase from a liquid to a gas. The liquid used was 3M Novec 649. Two-phase immersion cooling using this liquid is not viable at this time. The primary obstacles are IT equipment failures and costs. However, the demonstrated technology met the performance objectives for energy efficiency and greenhouse gas reduction. Before commercialization of this technology can occur, a root cause analysismore » of the failures should be completed, and the design changes proven.« less

Spacecraft Water Exposure Guidelines (SWEGs)

NASA Technical Reports Server (NTRS)

James, John T.

2008-01-01

As the protection of crew health is a primary focus of the National Aeronautics and Space Administration, the Space and Life Sciences Directorate (SLSD) is vigilant in setting potable water limits for spaceflight that are health protective. Additional it is important that exposure limits not be set so stringently that water purification systems are unnecessarily over designed. With these considerations in mind, NASA has partnered with the National Research Council on Toxicology (NRCCOT) to develop spacecraft water exposure guidelines (SWEGs) for application in spaceflight systems. Based on documented guidance (NRC, 2000) NASA has established 28 SWEGs for chemical components that are particularly relevant to water systems on the International Space Station, the Shuttle and looking forward to Constellation.

Considerations for biomarker-targeted intervention strategies for tuberculosis disease prevention.

PubMed

Fiore-Gartland, Andrew; Carpp, Lindsay N; Naidoo, Kogieleum; Thompson, Ethan; Zak, Daniel E; Self, Steve; Churchyard, Gavin; Walzl, Gerhard; Penn-Nicholson, Adam; Scriba, Thomas J; Hatherill, Mark

2018-03-01

Current diagnostic tests for Mycobacterium tuberculosis (MTB) infection have low prognostic specificity for identifying individuals who will develop tuberculosis (TB) disease, making mass preventive therapy strategies targeting all MTB-infected individuals impractical in high-burden TB countries. Here we discuss general considerations for a risk-targeted test-and-treat strategy based on a highly specific transcriptomic biomarker that can identify individuals who are most likely to progress to active TB disease as well as individuals with TB disease who have not yet presented for medical care. Such risk-targeted strategies may offer a rapid, ethical and cost-effective path towards decreasing the burden of TB disease and interrupting transmission and would also be critical to achieving TB elimination in countries nearing elimination. We also discuss design considerations for a Correlate of Risk Targeted Intervention Study (CORTIS), which could provide proof-of-concept for the strategy. One such study in South Africa is currently enrolling 1500 high-risk and 1700 low-risk individuals, as defined by biomarker status, and is randomizing high-risk participants to TB preventive therapy or standard of care treatment. All participants are monitored for progression to active TB with primary objectives to assess efficacy of the treatment and performance of the biomarker. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

40 CFR 52.579 - Economic feasibility considerations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Economic feasibility considerations. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Georgia> § 52.579 Economic feasibility... of economic feasibility could, in some cases, conflict, with the requirements of the Act that primary...

40 CFR 52.579 - Economic feasibility considerations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 3 2011-07-01 2011-07-01 false Economic feasibility considerations. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Georgia> § 52.579 Economic feasibility... of economic feasibility could, in some cases, conflict, with the requirements of the Act that primary...

40 CFR 52.579 - Economic feasibility considerations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 3 2014-07-01 2014-07-01 false Economic feasibility considerations. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Georgia § 52.579 Economic feasibility... of economic feasibility could, in some cases, conflict, with the requirements of the Act that primary...

40 CFR 52.579 - Economic feasibility considerations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 3 2012-07-01 2012-07-01 false Economic feasibility considerations. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Georgia § 52.579 Economic feasibility... of economic feasibility could, in some cases, conflict, with the requirements of the Act that primary...

40 CFR 52.579 - Economic feasibility considerations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 3 2013-07-01 2013-07-01 false Economic feasibility considerations. 52... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Georgia § 52.579 Economic feasibility... of economic feasibility could, in some cases, conflict, with the requirements of the Act that primary...

Ethical Design of Intelligent Assistive Technologies for Dementia: A Descriptive Review.

PubMed

Ienca, Marcello; Wangmo, Tenzin; Jotterand, Fabrice; Kressig, Reto W; Elger, Bernice

2017-09-22

The use of Intelligent Assistive Technology (IAT) in dementia care opens the prospects of reducing the global burden of dementia and enabling novel opportunities to improve the lives of dementia patients. However, with current adoption rates being reportedly low, the potential of IATs might remain under-expressed as long as the reasons for suboptimal adoption remain unaddressed. Among these, ethical and social considerations are critical. This article reviews the spectrum of IATs for dementia and investigates the prevalence of ethical considerations in the design of current IATs. Our screening shows that a significant portion of current IATs is designed in the absence of explicit ethical considerations. These results suggest that the lack of ethical consideration might be a codeterminant of current structural limitations in the translation of IATs from designing labs to bedside. Based on these data, we call for a coordinated effort to proactively incorporate ethical considerations early in the design and development of new products.

Ergonomic Considerations for the Human Environment: Color Treatment, Lighting, and Furniture Selection.

ERIC Educational Resources Information Center

Robertson, Michelle M.

1992-01-01

Discusses ergonomic design considerations for library media centers. Specific design variables, including temperature and humidity, noise, illumination, color, and windows are discussed; and computer workstation design requirements are presented that address furniture and keyboard design, monitor and display features, software issues, and…

Design Considerations for Post-Acute Care mHealth: Patient Perspectives.

PubMed

Sanger, Patrick; Hartzler, Andrea; Lober, William B; Evans, Heather L; Pratt, Wanda

2014-01-01

Many current mobile health applications ("apps") and most previous research have been directed at management of chronic illnesses. However, little is known about patient preferences and design considerations for apps intended to help in a post-acute setting. Our team is developing an mHealth platform to engage patients in wound tracking to identify and manage surgical site infections (SSI) after hospital discharge. Post-discharge SSIs are a major source of morbidity and expense, and occur at a critical care transition when patients are physically and emotionally stressed. Through interviews with surgical patients who experienced SSI, we derived design considerations for such a post-acute care app. Key design qualities include: meeting basic accessibility, usability and security needs; encouraging patient-centeredness; facilitating better, more predictable communication; and supporting personalized management by providers. We illustrate our application of these guiding design considerations and propose a new framework for mHealth design based on illness duration and intensity.

Human-Rated Space Vehicle Backup Flight Systems

NASA Technical Reports Server (NTRS)

Davis, Jeffrey A.; Busa, Joseph L.

2004-01-01

Human rated space vehicles have historically employed a Backup Flight System (BFS) for the main purpose of mitigating the loss of the primary avionics control system. Throughout these projects, however, the underlying philosophy and technical implementation vary greatly. This paper attempts to coalesce each of the past space vehicle program's BFS design and implementation methodologies with the accompanying underlining philosophical arguments that drove each program to such decisions. The focus will be aimed at Mercury, Gemini, Apollo, and Space Shuttle However, the ideologies and implementation of several commercial and military aircraft are incorporated as well to complete the full breadth view of BFS development across the varying industries. In particular to the non-space based vehicles is the notion of deciding not to utilize a BFS. A diverse analysis of BFS to primary system benefits in terms of reliability against all aspects of project development are reviewed and traded. The risk of engaging the BFS during critical stages of flight (e.g. ascent and entry), the level of capability of the BFS (subset capability of main system vs. equivalent system), and the notion of dissimilar hardware and software design are all discussed. Finally, considerations for employing a BFS on future human-rated space missions are reviewed in light of modern avionics architectures and mission scenarios implicit in exploration beyond low Earth orbit.

The Structural Ceramics Database: Technical Foundations

PubMed Central

Munro, R. G.; Hwang, F. Y.; Hubbard, C. R.

1989-01-01

The development of a computerized database on advanced structural ceramics can play a critical role in fostering the widespread use of ceramics in industry and in advanced technologies. A computerized database may be the most effective means of accelerating technology development by enabling new materials to be incorporated into designs far more rapidly than would have been possible with traditional information transfer processes. Faster, more efficient access to critical data is the basis for creating this technological advantage. Further, a computerized database provides the means for a more consistent treatment of data, greater quality control and product reliability, and improved continuity of research and development programs. A preliminary system has been completed as phase one of an ongoing program to establish the Structural Ceramics Database system. The system is designed to be used on personal computers. Developed in a modular design, the preliminary system is focused on the thermal properties of monolithic ceramics. The initial modules consist of materials specification, thermal expansion, thermal conductivity, thermal diffusivity, specific heat, thermal shock resistance, and a bibliography of data references. Query and output programs also have been developed for use with these modules. The latter program elements, along with the database modules, will be subjected to several stages of testing and refinement in the second phase of this effort. The goal of the refinement process will be the establishment of this system as a user-friendly prototype. Three primary considerations provide the guidelines to the system’s development: (1) The user’s needs; (2) The nature of materials properties; and (3) The requirements of the programming language. The present report discusses the manner and rationale by which each of these considerations leads to specific features in the design of the system. PMID:28053397

Evolution of design considerations in complex craniofacial reconstruction using patient-specific implants.

PubMed

Peel, Sean; Bhatia, Satyajeet; Eggbeer, Dominic; Morris, Daniel S; Hayhurst, Caroline

2017-06-01

Previously published evidence has established major clinical benefits from using computer-aided design, computer-aided manufacturing, and additive manufacturing to produce patient-specific devices. These include cutting guides, drilling guides, positioning guides, and implants. However, custom devices produced using these methods are still not in routine use, particularly by the UK National Health Service. Oft-cited reasons for this slow uptake include the following: a higher up-front cost than conventionally fabricated devices, material-choice uncertainty, and a lack of long-term follow-up due to their relatively recent introduction. This article identifies a further gap in current knowledge - that of design rules, or key specification considerations for complex computer-aided design/computer-aided manufacturing/additive manufacturing devices. This research begins to address the gap by combining a detailed review of the literature with first-hand experience of interdisciplinary collaboration on five craniofacial patient case studies. In each patient case, bony lesions in the orbito-temporal region were segmented, excised, and reconstructed in the virtual environment. Three cases translated these digital plans into theatre via polymer surgical guides. Four cases utilised additive manufacturing to fabricate titanium implants. One implant was machined from polyether ether ketone. From the literature, articles with relevant abstracts were analysed to extract design considerations. In all, 19 frequently recurring design considerations were extracted from previous publications. Nine new design considerations were extracted from the case studies - on the basis of subjective clinical evaluation. These were synthesised to produce a design considerations framework to assist clinicians with prescribing and design engineers with modelling. Promising avenues for further research are proposed.

Air cleaning performance of a new environmentally controlled primary crusher operator booth.

PubMed

Organiscak, J A; Cecala, A B; Zimmer, J A; Holen, B; Baregi, J R

2016-02-01

The National Institute for Occupational Safety and Health (NIOSH) cooperated with 3M Company in the design and testing of a new environmentally controlled primary crusher operator booth at the company's Wausau granite quarry near Wausau, WI. This quarry had an older crusher booth without a central heating, ventilation and air conditioning (HVAC) system, and without an air filtration and pressurization system. A new replacement operator booth was designed and installed by 3M based on design considerations from past NIOSH research on enclosed cab filtration systems. NIOSH conducted pre-testing of the old booth and post-testing of the new booth to assess the new filtration and pressurization system's effectiveness in controlling airborne dusts and particulates. The booth's dust and particulate control effectiveness is described by its protection factor, expressed as a ratio of the outside to inside concentrations measured during testing. Results indicate that the old booth provided negligible airborne respirable dust protection and low particulate protection from the outside environment. The newly installed booth provided average respirable dust protection factors from 2 to 25 over five shifts of dust sampling with occasional worker ingress and egress from the booth, allowing some unfiltered contaminants to enter the enclosure. Shorter-term particle count testing outside and inside the booth under near-steady-state conditions, with no workers entering or exiting the booth, resulted in protection factors from 35 to 127 on 0.3- to 1.0-μm respirable size particulates under various HVAC airflow operating conditions.

The role of training in STD prevention and control.

PubMed

Barnes, C; Cathcart, S

1998-03-01

The World Health Organization (WHO) estimates that 340 million new cases of curable sexually transmitted diseases (STDs) (excluding HIV and herpes simplex virus) occurred in 1995. The level of infection with STDs is especially troubling in developing countries, where they cause considerable morbidity. The consequences of infection with STDs can be personal, social, and economic. STD control programs are based upon the principles of primary and secondary prevention. Primary prevention strategies involve preventing the occurrence of new infections, while secondary prevention strategies aim to improve the management of STDs, and thereby to reduce their transmission and subsequent associated morbidity and mortality. Both primary and secondary prevention strategies require the dissemination of information from health workers to the at-risk population at a grassroots level, usually in primary health care centers. Health workers must therefore have a comprehensive and up-to-date knowledge of the many aspects of STDs, and be confident in their ability to communicate that information to others. A study in Tanzania determined that improvement in primary health care, including the provision of worker training, resulted in a 40% reduction in the incidence of HIV. The Wellcome Trust's new Topics in International Health series provides information on STDs on an interactive CD-ROM covering the epidemiology, diagnosis, clinical features, and treatment of the major STDs, except HIV, which is the subject of a separate CD-ROM. The CD-ROM was designed to be used in training programs for medical students and health care workers.

A Systematic Review of Primary Care Safety Climate Survey Instruments: Their Origins, Psychometric Properties, Quality, and Usage.

PubMed

Curran, Ciara; Lydon, Sinéad; Kelly, Maureen; Murphy, Andrew; Walsh, Chloe; OʼConnor, Paul

2018-06-01

Safety climate (SC) measurement is a common and feasible method of proactive safety assessment in primary care. However, there is no consensus on which instrument is "best" to use. The aim of the study was to identify the origins, psychometric properties, quality, and SC domains measured by survey instruments used to assess SC in primary care settings. Systematic searches were conducted using Medline, Embase, CINAHL, and PsycInfo in February 2016. English-language, peer-reviewed studies that reported the development and/or use of a SC survey in a primary care setting were included. Two reviewers independently extracted data (survey characteristics, origins, and psychometric properties) from studies and applied the Quality Assessment Tool for Studies with Diverse Designs to assess methodological rigour. Safety climate domains within surveys were deductively analyzed and categorized into common healthcare SC themes. Seventeen SC surveys were identified, of which 16 had been adapted from 2 main U.S. hospital-based surveys. Only 1 survey was developed de novo for a primary care setting. The quantity and quality of psychometric testing varied considerably across the surveys. Management commitment to safety was the most frequently measured SC theme (87.5%). Workload was infrequently measured (25%). Valid and reliable instruments, which are context specific to the healthcare environment for intentional use, are essential to accurately assess SC. Key recommendations include further establishing the construct and criterion-related validity of existing instruments as opposed to developing additional surveys.

Investigation of Engineering and Design Considerations in Selecting Conveyors for Densified Refuse-Derived Fuel (dRDF) and dRDF: Coal Mixtures.

DTIC Science & Technology

1981-08-01

or discharge paths of material over the end pulley of a conveyor are important to the proper design and function of discharge chutes , wear plates or...8217 ’iESL-TR-81-58 INVESTIGATION OF ENGINEERING AND DESIGN CONSIDERATIONS IN SELECTING CONVEYORS FOR DENSIFIED REFUSE-DERIVED FUEL (dRDF) AND dRDF: COAL...Engineering and Design Final Report Considerations in Selecting Conveyors for JUN 1980 - SEP 1981 Densified Refuse-Derived Fuel (dRDF) and 6. PERFORMING ORG

Lunar Module ECS (Environmental Control System) - Design Considerations and Failure Modes. Part 1

NASA Technical Reports Server (NTRS)

Interbartolo, Michael

2009-01-01

Design considerations and failure modes for the Lunar Module (LM) Environmental Control System (ECS) are described. An overview of the the oxygen supply and cabin pressurization, atmosphere revitalization, water management and heat transport systems are provided. Design considerations including reliability, flight instrumentation, modularization and the change to the use of batteries instead of fuel cells are discussed. A summary is provided for the LM ECS general testing regime.

Design and analysis of a keel latch for use on the Hubble Space Telescope

NASA Technical Reports Server (NTRS)

Calvert, John; Stinson, Melanie

1986-01-01

The mechanical design of the keel latch is discussed, as well as the stress analysis of the keel latch. Background information; mechanical design requirements; some of the initial design considerations; the design considerations that led to the selection of the final design; the mechanics of the final design; testing that has been and will be accomplished to verify that design requirements have been met; and future tests are discussed.

Solar Design Workbook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Franta, G.; Baylin, F.; Crowther, R.

1981-06-01

This Solar Design Workbook presents solar building design applications for commercial buildir^s. The book is divided into four sections. The first section describes the variety of solar applications in buildings including conservation aspects, solar fundamentals, passive systems, active systems, daylighting, and other solar options. Solar system design evaluation techniques including considerations for building energy requirements, passive systems, active systems, and economics are presented in Section II. The third section attempts to assist the designer in the building design process for energy conservation and solar applications including options and considerations for pre-design, design, and post-design phases. The information required for themore » solar design proee^ has not been fully developed at this time. Therefore, Section III is incomplete, but an overview of the considerations with some of the design proces elements is presented. Section IV illustrates ease studies that utilize solar applications in the building design.« less

ASME code considerations for the compact heat exchanger

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nestell, James; Sham, Sam

2015-08-31

The mission of the U.S. Department of Energy (DOE), Office of Nuclear Energy is to advance nuclear power in order to meet the nation's energy, environmental, and energy security needs. Advanced high temperature reactor systems such as sodium fast reactors and high and very high temperature gas-cooled reactors are being considered for the next generation of nuclear reactor plant designs. The coolants for these high temperature reactor systems include liquid sodium and helium gas. Supercritical carbon dioxide (sCO₂), a fluid at a temperature and pressure above the supercritical point of CO₂, is currently being investigated by DOE as a workingmore » fluid for a nuclear or fossil-heated recompression closed Brayton cycle energy conversion system that operates at 550°C (1022°F) at 200 bar (2900 psi). Higher operating temperatures are envisioned in future developments. All of these design concepts require a highly effective heat exchanger that transfers heat from the nuclear or chemical reactor to the chemical process fluid or the to the power cycle. In the nuclear designs described above, heat is transferred from the primary to the secondary loop via an intermediate heat exchanger (IHX) and then from the intermediate loop to either a working process or a power cycle via a secondary heat exchanger (SHX). The IHX is a component in the primary coolant loop which will be classified as "safety related." The intermediate loop will likely be classified as "not safety related but important to safety." These safety classifications have a direct bearing on heat exchanger design approaches for the IHX and SHX. The very high temperatures being considered for the VHTR will require the use of very high temperature alloys for the IHX and SHX. Material cost considerations alone will dictate that the IHX and SHX be highly effective; that is, provide high heat transfer area in a small volume. This feature must be accompanied by low pressure drop and mechanical reliability and robustness. Classic shell and tube designs will be large and costly, and may only be appropriate in steam generator service in the SHX where boiling inside the tubes occurs. For other energy conversion systems, all of these features can be met in a compact heat exchanger design. This report will examine some of the ASME Code issues that will need to be addressed to allow use of a Code-qualified compact heat exchanger in IHX or SHX nuclear service. Most effort will focus on the IHX, since the safety-related (Class A) design rules are more extensive than those for important-to-safety (Class B) or commercial rules that are relevant to the SHX.« less

Interpretation of BM Orionis. [eclipsing binary model

NASA Technical Reports Server (NTRS)

Huang, S.-S.

1975-01-01

The entire light curve of the BM Ori system both inside and outside primary and secondary eclipses has been examined on the basis of two models for the disk around the secondary component: one with the luminous energy of the disk coming entirely from the secondary, and another with the luminous energy coming at least partly from the primary. It has been found that if the disk is highly opaque, as is suggested by the fitting of the light curve, there exist in the first model discrepancies between what has been derived from the luminosity consideration for the secondary component and what has been derived from the radius consideration. Hence the second model is accepted. Based on this model the nature of both component stars has been examined from a consideration of the luminosity and the dimensions of the disk.

Tungsten fiber reinforced superalloy composite high temperature component design considerations

NASA Technical Reports Server (NTRS)

Winsa, E. A.

1982-01-01

Tungsten fiber reinforced superalloy composites (TFRS) are intended for use in high temperature turbine components. Current turbine component design methodology is based on applying the experience, sometimes semiempirical, gained from over 30 years of superalloy component design. Current composite component design capability is generally limited to the methodology for low temperature resin matrix composites. Often the tendency is to treat TFRS as just another superalloy or low temperature composite. However, TFRS behavior is significantly different than that of superalloys, and the high environment adds consideration not common in low temperature composite component design. The methodology used for preliminary design of TFRS components are described. Considerations unique to TFRS are emphasized.

We're Creative on a Friday Afternoon: Investigating Children's Perceptions of their Experience of Design & Technology in Relation to Creativity

NASA Astrophysics Data System (ADS)

Benson, Clare; Lunt, Julie

2011-10-01

In the last 15 years there has been an increased emphasis in both educational research and curriculum development upon investigating children's perspectives of their experience of learning. Children naturally have very particular and important insights to offer in helping us to develop our understanding of teaching and learning. However, research into children's perceptions in the field of primary Design & Technology education is still at a very early stage (Lunt in International handbook of research and development in technology education, Sense Publishers, Utrecht, 2009a). For example, in three reviews of educational research in Design & Technology (Kimbell in A guide to educational research, The Woburn Publishers, London, 1996; Eggleston in Teaching and learning design and technology: a guide to recent research and its applications, Continuum, London, 2000; Harris and Wilson in Designs on the curriculum? A review of the literature on the impact of design and technology in schools, Department for Education and Skills, London, 2003) there are only passing references made to eliciting and considering pupils' views and, in the studies where it does occur, it is used as a supplementary method of data collection rather than as a focus of research. The work which exists is small-scale and the majority of studies relate to secondary-aged pupils. The research that we have recently undertaken has tried to redress this gap. It has focused on primary children's (aged 9-11 years) perceptions of Design & Technology in general (Benson and Lunt in PATT 18 international conference on design and technology educational research: teaching and learning technological literacy in the classroom, University of Glasgow, Glasgow, 2007) and latterly creativity in Design & Technology. It has been claimed by many that Design & Technology is a `creative' subject which develops children's creative abilities. This is a bold claim and one that needs careful consideration. This paper sets out a framework for thinking about creativity drawn from a review of the literature and uses evidence of children's perceptions of their experience of Design & Technology to compare practice with theory in an attempt to raise questions and issues relevant to both policy and practice.

The interaction between design and occupier behaviour in the safety of new homes.

PubMed

McDermott, Hilary; Haslam, Roger; Gibb, Alistair

2007-03-01

The design of new homes includes many safety features intended to protect occupiers from injury or ill health within the home, however the effectiveness of these primary intervention measures is likely to be affected by user behaviour. This study examined the interaction between user activity and dwelling design and how this might affect health and safety. It aimed to identify how people use features within new homes and how this may limit the protection afforded by building design, codes and regulations. Forty, home-based, semi-structured, in-depth interviews and home inspections were conducted with individuals recently inhabiting a new home. A range of behaviours were reported in relation to building features including fire doors, pipes and cables, and loft access, which may lead to increased risk of injury or ill-health. For example, occupiers described interfering with the self-closing mechanisms on fire doors and drilling into walls without considering the location of services. They also reported knowingly engaging in unsafe behaviour when accessing the loft, increasing their risk of falls. The accounts suggest that designers and builders need to give greater consideration to how occupier behaviour interacts with building features so that improvements in both design and occupier education can lead to improved health and safety.

Barriers to managing child and adolescent mental health problems: a systematic review of primary care practitioners’ perceptions

PubMed Central

O’Brien, Doireann; Harvey, Kate; Howse, Jessica; Reardon, Tessa; Creswell, Cathy

2016-01-01

Background Mental health problems are common and typically have an early onset. Effective treatments for mental health problems in childhood and adolescence are available, yet only a minority of children who are affected access them. This is of serious concern, considering the far-reaching and long-term negative consequences of such problems. Primary care is usually the first port of call for concerned parents so it is important to understand how primary care practitioners manage child and adolescent mental health problems and the barriers they face. Aim To ascertain primary care practitioners’ perceptions of the barriers that prevent effective management of child and adolescent mental health problems. Design and setting A systematic review of qualitative and quantitative literature in a primary care setting. Method A database search of peer-reviewed articles using PsycINFO, MEDLINE®, Embase, and Web of Science, from inception (earliest 1806) until October 2014, was conducted. Additional studies were identified through hand searches and forward-citation searches. Studies needed to have at least one search term in four categories: primary care, childhood/adolescence, mental health, and barriers. Results A total of 4151 articles were identified, of which 43 were included (30 quantitative studies and 13 qualitative studies). The majority of the barriers related to identification, management, and/or referral. Considerable barriers included a lack of providers and resources, extensive waiting lists, and financial restrictions. Conclusion The identification of a broad range of significant barriers highlights the need to strengthen the ability to deal with these common difficulties in primary care. There is a particular need for tools and training to aid accurate identification and management, and for more efficient access to specialist services. PMID:27621291

The role of anthropometry in designing for sustainability.

PubMed

Nadadur, Gopal; Parkinson, Matthew B

2013-01-01

An understanding of human factors and ergonomics facilitates the design of artefacts, tasks and environments that fulfil their users' physical and cognitive requirements. Research in these fields furthers the goal of efficiently accommodating the desired percentage of user populations through enhanced awareness and modelling of human variability. Design for sustainability (DfS) allows for these concepts to be leveraged in the broader context of designing to minimise negative impacts on the environment. This paper focuses on anthropometry and proposes three ways in which its consideration is relevant to DfS: reducing raw material consumption, increasing usage lifetimes and ethical human resource considerations. This is demonstrated through the application of anthropometry synthesis, virtual fitting, and sizing and adjustability allocation methods in the design of an industrial workstation seat for use in five distinct global populations. This work highlights the importance of and opportunities for using ergonomic design principles in DfS efforts. This research demonstrates the relevance of some anthropometry-based ergonomics concepts to the field of design for sustainability. A global design case study leverages human variability considerations in furthering three sustainable design goals: reducing raw material consumption, increasing usage lifetimes and incorporating ethical human resource considerations in design.

Interrater reliability of the cervicothoracic and shoulder physical examination in patients with a primary complaint of shoulder pain.

PubMed

Burns, Scott A; Cleland, Joshua A; Carpenter, Kristin; Mintken, Paul E

2016-03-01

Examine the interrater reliability of cervicothoracic and shoulder physical examination in patients with a primary complaint of shoulder pain. Single-group repeated-measures design for interrater reliability. Orthopaedic physical therapy clinics. Twenty-one patients with a primary complaint of shoulder pain underwent a standardized examination by a physical therapist (PT). A PT conducted the first examination and one of two additional PTs conducted the 2nd examination. The Cohen κ and weighted κ were used to calculate the interrater reliability of ordinal level data. Intraclass correlation coefficients model 2,1 (ICC2,1) and the 95% confidence intervals were calculated to determine the interrater reliability. The kappa coefficients ranged from -.24 to .83 for the mobility assessment of the glenohumeral, acromioclavicular and sternoclavicular joints. The kappa coefficients ranged from -.20 to .58 for joint mobility assessment of the cervical and thoracic spine. The kappa coefficients ranged from .23 to 1.0 for special tests of the shoulder and cervical spine. The present study reported the reliability of a comprehensive upper quarter physical examination for a group of patients with a primary report of shoulder pain. The reliability varied considerably for the cervical and shoulder examination and was significantly higher for the examination of muscle length and cervical range of motion. Copyright © 2015 Elsevier Ltd. All rights reserved.

How work setting and job experience affect professional nurses' values.

PubMed

Fernández-Feito, Ana; Palmeiro-Longo, María Del Rosario; Hoyuelos, Salomé Basurto; García-Díaz, Vanesa

2017-01-01

The development of professional values in nursing is directly related to quality and ethical clinical practise and may also increase practitioner and patients' satisfaction. Some factors, such as work setting or work experience, can influence the importance granted to the professional values of nursing. To compare in primary care nurses and hospital care nurses the importance granted to professional values and to contrast this perception as a function of professional experience. Research design, participants and research context: Descriptive cross-sectional study. Participants were 380 nursing professionals from the public health system (primary care and hospital care). Three dimensions were analysed: ethics, professional expertise and professional mastery. Data were collected from January to June 2015. Ethical considerations: We obtained permission from the Ethics Committee and participants' informed consent. Hospital care professionals attached more importance to all the values analysed, regardless of their work experience. Ethical values, such as confidentiality and respect for the person, were considered to be very important in both systems. Values related to professional expertise obtained lower scores, especially in primary care. In general, professionals with more than 20 years' experience granted less importance to the values. The professional setting influenced the importance assigned to professional nursing values, and clear differences were observed between primary and hospital care. The domain of ethics was considered the most important. It is necessary to reflect on the significance attributed to professional values, especially in more expert nursing staff.

Probe interface design consideration. [for interplanetary spacecraft missions

NASA Technical Reports Server (NTRS)

Casani, E. K.

1974-01-01

Interface design between a probe and a spacecraft requires not only technical considerations but also management planning and mission analysis interactions. Two further aspects of importance are the flyby versus the probe trade-off, and the relay link design and data handling optimization.

Edaravone and its clinical development for amyotrophic lateral sclerosis.

PubMed

Takei, Koji; Watanabe, Kazutoshi; Yuki, Satoshi; Akimoto, Makoto; Sakata, Takeshi; Palumbo, Joseph

2017-10-01

The etiology of amyotrophic lateral sclerosis (ALS) is unknown. Oxidative stress may be one of the major mechanisms involved. In vitro and in vivo data of edaravone suggest that it may possess broad free radical scavenging activity and protect neurons, glia, and vascular endothelial cells against oxidative stress. During the 1980s and 1990s, edaravone was developed for the treatment of acute ischemic stroke. In 2001, a clinical program in ALS was initiated and five clinical studies were conducted in Japan. Phase III studies were designed to rapidly evaluate (within a 24-week double-blind study window) functional changes using the Revised ALS Functional Rating Scale (ALSFRS-R) as a primary endpoint. The study populations were selected according to these considerations and were further refined as the studies proceeded. Although the first phase III study did not meet its primary endpoint, post-hoc analyses showed an apparent effect of edaravone, when additional patient inclusion criteria defined by ALSFRS-R score, pulmonary function, certainty of ALS diagnosis, and duration of disease were applied. This population was hypothesized not only to have retained broad functionality and normal respiratory function at study baseline but also to be likely to show measurable disease progression over 24 weeks. A second confirmatory phase III study applying these refinements in patient selection was prospectively designed and successfully documented a statistically significant difference between the edaravone and placebo groups in the ALSFRS-R primary endpoint. This paper describes and reviews data pertinent to the potential mechanism of action of edaravone, and reviews the development history of edaravone for the treatment of ALS.

Medication Adherence With Diabetes Medication: A Systematic Review of the Literature.

PubMed

Capoccia, Kam; Odegard, Peggy S; Letassy, Nancy

2016-02-01

The primary purpose of this systematic review is to synthesize the evidence regarding risk factors associated with nonadherence to prescribed glucose-lowering agents, the impact of nonadherence on glycemic control and the economics of diabetes care, and the interventions designed to improve adherence. Medline, EMBASE, the Cochrane Collaborative, BIOSIS, and the Health and Psychosocial Instruments databases were searched for studies of medication adherence for the period from May 2007 to December 2014. Inclusion criteria were study design and primary outcome measuring or characterizing adherence. Published evidence was graded according to the American Association of Clinical Endocrinologists protocol for standardized production of clinical practice guidelines. One hundred ninety-six published articles were reviewed; 98 met inclusion criteria. Factors including age, race, health beliefs, medication cost, co-pays, Medicare Part D coverage gap, insulin use, health literacy, primary nonadherence, and early nonpersistence significantly affect adherence. Higher adherence was associated with improved glycemic control, fewer emergency department visits, decreased hospitalizations, and lower medical costs. Adherence was lower when medications were not tolerated or were taken more than twice daily, with concomitant depression, and with skepticism about the importance of medication. Intervention trials show the use of phone interventions, integrative health coaching, case managers, pharmacists, education, and point-of-care testing improve adherence. Medication adherence remains an important consideration in diabetes care. Health professionals working with individuals with diabetes (eg, diabetes educators) are in a key position to assess risks for nonadherence, to develop strategies to facilitate medication taking, and to provide ongoing support and assessment of adherence at each visit. © 2015 The Author(s).

Through the Eyes of the User: Evaluating Neonatal Intensive Care Unit Design.

PubMed

Denham, Megan E; Bushehri, Yousef; Lim, Lisa

2018-01-01

This article presents a pilot study that employed a user-centered methodology for evaluating and quantifying neonatal intensive care unit (NICU) designs based on the needs of the primary users. The design of NICUs has begun to shift from open-bay to single-family rooms. Both designs present unique advantages and challenges that impact babies, families, and caregivers. One NICU design was analyzed using the functional scenario (FS) analysis method. For the FS, users' needs were determined through literature review, interviews with NICU providers and parents, and a review of published design guidelines. Quantitative metrics were developed for each FS, so that characteristics of the NICU design could be analyzed to determine how successful they were in meeting the users' needs. The results were graphically represented to visualize the success and considerations of the design. A total of 23 FSs and 61 spatial metrics were developed. FSs for babies focused on infection prevention, minimizing exposure to environmental stimuli, and supporting enriching care activities. FSs for family members focused on direct access to the baby, and privacy and adequate space for daily activities. FSs for providers and caregivers focused on infection prevention, care activities, care zones, and visibility. Using an FS approach highlights design characteristics in the NICU that need to be addressed during the design process to more successfully meet the needs of the different users. Additionally, using this approach can inform design professionals' decision-making by presenting them with the design characteristics that impact the needs of the user groups.

Particulate Matter Filtration Design Considerations for Crewed Spacecraft Life Support Systems

NASA Technical Reports Server (NTRS)

Agui, Juan H.; Vijayakumar, R.; Perry, Jay L.

2016-01-01

Particulate matter filtration is a key component of crewed spacecraft cabin ventilation and life support system (LSS) architectures. The basic particulate matter filtration functional requirements as they relate to an exploration vehicle LSS architecture are presented. Particulate matter filtration concepts are reviewed and design considerations are discussed. A concept for a particulate matter filtration architecture suitable for exploration missions is presented. The conceptual architecture considers the results from developmental work and incorporates best practice design considerations.

A manned lunar outpost. Design considerations for three key elements in an initial manned lunar outpost

NASA Technical Reports Server (NTRS)

Bell, Larry; Trotti, Guillermo; Brown, Jeff; Bhattacharya, Nilajan; Moore, Nathan; Polette, Tom; Toups, Larry

1988-01-01

The Initial Manned Lunar Outpost (IMLO) is proposed as the initial permanent base for manned activities on the Moon. The study concentrated on identifying the equipment, support systems, and initial base configuration necessary to accomplish the various science, industrial and exploration activities planned. The primary concepts of the MLO were the use of hard modules for habitation areas creating a flexible, modular transportation system; designing a multi-functional vehicle; and using an overhead radiation protection system. The transportation system, dubbed the Lunar Mobile Surface Transport System (LMSTS), carries the hard modules to the surface of the moon and provides a method to move them to the desired location through the use of interchangeable pallets. The avionics pallets are changed-out with wheel and hitch pallets, transforming the LMSTS into a "tractor trailer" used with the Multi-Functional Vehicle (MFV). The modules are placed under the Regolith Support Structure (RSS) which provides a stable environment and radiation protection for the entire base. The overhead structure was chosen over simply burying the modules to provide a study on the advantages and disadvantages of this type of system. The advantages include easy access to the exterior of the modules, providing a protected area for vehicles and equipment used in EVA, and creating an area of constant temperature. Disadvantages include a need for prefabrication of structural components, including the preconstruction and construction phases of the initial MLO. The design approach taken considered existing and near-term materials and technology only, without the consideration of possible future building technologies.

The growing outer epidermal wall: design and physiological role of a composite structure.

PubMed

Kutschera, U

2008-04-01

The cells of growing plant organs secrete an extracellular fibrous composite (the primary wall) that allows the turgid protoplasts to expand irreversibly via wall-yielding events, which are regulated by processes within the cytoplasm. The role of the epidermis in the control of stem elongation is described with special reference to the outer epidermal wall (OEW), which forms a 'tensile skin'. The OEW is much thicker and less extensible than the walls of the inner tissues. Moreover, in the OEW the amount of cellulose per unit wall mass is considerably greater than in the inner tissues. Ultrastructural studies have shown that the expanding OEW is composed of a highly ordered internal and a diffuse outer half, with helicoidally organized cellulose microfibrils in the inner (load-bearing) region of this tension-stressed organ wall. The structural and mechanical backbone of the wall consists of helicoids, i.e. layers of parallel, inextensible cellulose microfibrils. These 'plywood laminates' contain crystalline 'cables' orientated in all directions with respect to the axis of elongation (isotropic material). Cessation of cell elongation is accompanied by a loss of order, i.e. the OEW is a dynamic structure. Helicoidally arranged extracellular polymers have also been found in certain bacteria, algae, fungi and animals. In the insect cuticle crystalline cutin nanofibrils form characteristic 'OEW-like' herringbone patterns. Theoretical considerations, in vitro studies and computer simulations suggest that extracellular biological helicoids form by directed self-assembly of the crystalline biopolymers. This spontaneous generation of complex design 'without an intelligent designer' evolved independently in the protective 'skin' of plants, animals and many other organisms.

Design and life-cycle considerations for unconventional-reservoir wells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miskimins, J.L.

2009-05-15

This paper provides an overview of design and life-cycle considerations for certain unconventional-reservoir wells. An overview of unconventional-reservoir definitions is provided. Well design and life-cycle considerations are addressed from three aspects: upfront reservoir development, initial well completion, and well-life and long-term considerations. Upfront-reservoir-development issues discussed include well spacing, well orientation, reservoir stress orientations, and tubular metallurgy. Initial-well-completion issues include maximum treatment pressures and rates, treatment diversion, treatment staging, flowback and cleanup, and dewatering needs. Well-life and long-term discussions include liquid loading, corrosion, refracturing and associated fracture reorientation, and the cost of abandonment. These design considerations are evaluated with case studiesmore » for five unconventional-reservoir types: shale gas (Barnett shale), tight gas (Jonah feld), tight oil (Bakken play), coalbed methane (CBM) (San Juan basin), and tight heavy oil (Lost Hills field). In evaluating the life cycle and design of unconventional-reservoir wells, 'one size' does not fit all and valuable knowledge and a shortening of the learning curve can be achieved for new developments by studying similar, more-mature fields.« less

What “Price” Means When Buying Food: Insights From a Multisite Qualitative Study With Black Americans

PubMed Central

DiSantis, Katherine Isselmann; Grier, Sonya A.; Odoms-Young, Angela; Baskin, Monica L.; Carter-Edwards, Lori; Young, Deborah Rohm; Lassiter, Vikki

2013-01-01

Objectives. We explored the role of price in the food purchasing patterns of Black adults and youths. Methods. We analyzed qualitative data from interviews and focus groups with socioeconomically diverse, primarily female, Black adults or parents (n = 75) and youths (n = 42) in 4 US cities. Interview protocols were locality specific, but all were designed to elicit broad discussion of food marketing variables. We performed a conventional qualitative content analysis by coding and analyzing data from each site to identify common salient themes. Results. Price emerged as a primary influence on food purchases across all sites. Other value considerations (e.g., convenience, food quality, healthfulness of product, and family preferences) were discussed, providing a more complex picture of how participants considered the price of a product. Conclusions. Food pricing strategies that encourage consumption of healthful foods may have high relevance for Black persons across income or education levels. Accounting for how price intersects with other value considerations may improve the effectiveness of these strategies. PMID:23327261

Basic Science Considerations in Primary Total Hip Replacement Arthroplasty

PubMed Central

Mirza, Saqeb B; Dunlop, Douglas G; Panesar, Sukhmeet S; Naqvi, Syed G; Gangoo, Shafat; Salih, Saif

2010-01-01

Total Hip Replacement is one of the most common operations performed in the developed world today. An increasingly ageing population means that the numbers of people undergoing this operation is set to rise. There are a numerous number of prosthesis on the market and it is often difficult to choose between them. It is therefore necessary to have a good understanding of the basic scientific principles in Total Hip Replacement and the evidence base underpinning them. This paper reviews the relevant anatomical and biomechanical principles in THA. It goes on to elaborate on the structural properties of materials used in modern implants and looks at the evidence base for different types of fixation including cemented and uncemented components. Modern bearing surfaces are discussed in addition to the scientific basis of various surface engineering modifications in THA prostheses. The basic science considerations in component alignment and abductor tension are also discussed. A brief discussion on modular and custom designs of THR is also included. This article reviews basic science concepts and the rationale underpinning the use of the femoral and acetabular component in total hip replacement. PMID:20582240

34 CFR 85.445 - What action may I take if a primary tier participant knowingly does business with an excluded or...

Code of Federal Regulations, 2010 CFR

2010-07-01

... suspension and debarment consideration. You may also disallow costs, annul or terminate the transaction...) Responsibilities of ED Officials Regarding Transactions § 85.445 What action may I take if a primary tier...

24 CFR 3282.361 - Design Approval Primary Inspection Agency (DAPIA).

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Design Approval Primary Inspection... REGULATIONS Primary Inspection Agencies § 3282.361 Design Approval Primary Inspection Agency (DAPIA). (a... manufactured home designs submitted to it by the manufacturer and for assuring that they conform to the...

METHODS FOR INTEGRATING ENVIRONMENTAL CONSIDERATIONS INTO CHEMICAL PROCESS DESIGN DECISIONS

EPA Science Inventory

The objective of this cooperative agreement was to postulate a means by which an engineer could routinely include environmental considerations in day-to-day conceptual design problems; a means that could easily integrate with existing design processes, and thus avoid massive retr...

STORMWATER BEST MANAGEMENT PRACTICES DESIGN GUIDE VOLUME 1 - GENERAL CONSIDERATIONS

EPA Science Inventory

This document is Volume 1 of a three volume series that provides guidance on the selection and design of stormwater management Best Management Practices (BMPs). This first volume provides general considerations associated with the selection and design of BMPs.
Volume I provi...

Some design issues in trials of microbicides for the prevention of HIV infection.

PubMed

Fleming, Thomas R; Richardson, Barbra A

2004-08-15

Trials for the prevention of human immunodeficiency virus (HIV) infection that evaluate microbicides provide significant design challenges. Three of these design issues deserve more careful consideration. The first issue relates to the benefits of using both blinded and unblinded control groups when the placebo regimen may not be inert and when the effectiveness of an intervention heavily depends on behavioral, as well as biological, factors. The second issue relates to the strength of evidence required for regulatory approval for the marketing of drugs and biologics when only a single pivotal phase 3 clinical trial has provided such evidence. The third issue relates to the appropriate next step after the completion of phase 1 trials, as well as the specific merits of conducting phase 2b screening trials that assess the effects on the same clinical efficacy end point that will be the primary end point in a phase 3 trial. The issues considered in microbicide trials for the prevention of HIV infection are also of importance in many other clinical scenarios.

Handling Qualities Prediction of an F-16XL-Based Reduced Sonic Boom Aircraft

NASA Technical Reports Server (NTRS)

Cogan, Bruce; Yoo, Seung

2010-01-01

A major goal of the Supersonics Project under NASA s Fundamental Aeronautics program is sonic boom reduction of supersonic aircraft. An important part of this effort is development and validation of sonic boom prediction tools used in aircraft design. NASA Dryden s F- 16XL was selected as a potential testbed aircraft to provide flight validation. Part of this task was predicting the handling qualities of the modified aircraft. Due to the high cost of modifying the existing F-16XL control laws, it was desirable to find modifications that reduced the aircraft sonic boom but did not degrade baseline aircraft handling qualities allowing for the potential of flight test without changing the current control laws. This was not a requirement for the initial modification design work, but an important consideration for proceeding to the flight test option. The primary objective of this work was to determine an aerodynamic and mass properties envelope of the F-16XL aircraft. The designers could use this envelope to determine the effect of proposed modifications on aircraft handling qualities.

Acoustical considerations for secondary uses of government facilities

NASA Astrophysics Data System (ADS)

Evans, Jack B.

2003-10-01

Government buildings are by their nature, public and multi-functional. Whether in meetings, presentations, documentation processing, work instructions or dispatch, speech communications are critical. Full-time occupancy facilities may require sleep or rest areas adjacent to active spaces. Rooms designed for some other primary use may be used for public assembly, receptions or meetings. In addition, environmental noise impacts to the building or from the building should be considered, especially where adjacent to hospitals, hotels, apartments or other urban sensitive land uses. Acoustical criteria and design parameters for reverberation, background noise and sound isolation should enhance speech intelligibility and privacy. This presentation looks at unusual spaces and unexpected uses of spaces with regard to room acoustics and noise control. Examples of various spaces will be discussed, including an atrium used for reception and assembly, multi-jurisdictional (911) emergency control center, frequent or long-duration use of emergency generators, renovations of historically significant buildings, and the juxtaposition of acoustically incompatible functions. Brief case histories of acoustical requirements, constraints and design solutions will be presented, including acoustical measurements, plan illustrations and photographs. Acoustical criteria for secondary functional uses of spaces will be proposed.

Crack cause analysis of a graphite nozzle throat insert

NASA Astrophysics Data System (ADS)

Sun, Lin; Bao, Futing; Zhao, Yu; Hou, Lian; Hui, Weihua; Zhang, Ning; Shi, Wei

2017-08-01

With an objective to determine the failure cause of a throughout crack at an angle of 45° and a breach during a firing test, a simplified analysis procedure with consideration of the structure gap was established to simulate the thermo-structural response of a nozzle. By neglecting erosion and pyrolysis of the insulating materials and establishing temperature-dependent or anisotropic material models, ANSYS Parameter Design Language codes were written to perform the fully coupled thermal-structural simulation. A Quasi-1D flow was calculated for supplying boundary conditions. Study on mesh independence and time step independence was also conducted to evaluate simulated results. It was found that shortly after ignition, compressive stress in the x direction and tensile stress in the y direction contributed to anomalies. And through contact status analysis, inappropriate gap design was regarded as the origin of the too large stress, which was the primary cause of these anomalies during firing test. Simulation results were in good agreement with firing test results. In addition, the simplified analysis procedure was proven effective. Gap size should be seriously dealt with in the future design.

The single event upset environment for avionics at high latitude

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sims, A.J.; Dyer, C.S.; Peerless, C.L.

1994-12-01

Modern avionic systems for civil and military applications are becoming increasingly reliant upon embedded microprocessors and associated memory devices. The phenomenon of single event upset (SEU) is well known in space systems and designers have generally been careful to use SEU tolerant devices or to implement error detection and correction (EDAC) techniques where appropriate. In the past, avionics designers have had no reason to consider SEU effects but is clear that the more prevalent use of memory devices combined with increasing levels of IC integration will make SEU mitigation an important design consideration for future avionic systems. To this end,more » it is necessary to work towards producing models of the avionics SEU environment which will permit system designers to choose components and EDAC techniques which are based on predictions of SEU rates correct to much better than an order of magnitude. Measurements of the high latitude SEU environment at avionics altitude have been made on board a commercial airliner. Results are compared with models of primary and secondary cosmic rays and atmospheric neutrons. Ground based SEU tests of static RAMs are used to predict rates in flight.« less

Test model designs for advanced refractory ceramic materials

NASA Technical Reports Server (NTRS)

Tran, Huy Kim

1993-01-01

The next generation of space vehicles will be subjected to severe aerothermal loads and will require an improved thermal protection system (TPS) and other advanced vehicle components. In order to ensure the satisfactory performance system (TPS) and other advanced vehicle materials and components, testing is to be performed in environments similar to space flight. The design and fabrication of the test models should be fairly simple but still accomplish test objectives. In the Advanced Refractory Ceramic Materials test series, the models and model holders will need to withstand the required heat fluxes of 340 to 817 W/sq cm or surface temperatures in the range of 2700 K to 3000 K. The model holders should provide one dimensional (1-D) heat transfer to the samples and the appropriate flow field without compromising the primary test objectives. The optical properties such as the effective emissivity, catalytic efficiency coefficients, thermal properties, and mass loss measurements are also taken into consideration in the design process. Therefore, it is the intent of this paper to demonstrate the design schemes for different models and model holders that would accommodate these test requirements and ensure the safe operation in a typical arc jet facility.

Solar glint suppression in compact planetary ultraviolet spectrographs

NASA Astrophysics Data System (ADS)

Davis, Michael W.; Cook, Jason C.; Grava, Cesare; Greathouse, Thomas K.; Gladstone, G. Randall; Retherford, Kurt D.

2015-08-01

Solar glint suppression is an important consideration in the design of compact photon-counting ultraviolet spectrographs. Southwest Research Institute developed the Lyman Alpha Mapping Project for the Lunar Reconnaissance Orbiter (launch in 2009), and the Ultraviolet Spectrograph on Juno (Juno-UVS, launch in 2011). Both of these compact spectrographs revealed minor solar glints in flight that did not appear in pre-launch analyses. These glints only appeared when their respective spacecraft were operating outside primary science mission parameters. Post-facto scattered light analysis verifies the geometries at which these glints occurred and why they were not caught during ground testing or nominal mission operations. The limitations of standard baffle design at near-grazing angles are discussed, as well as the importance of including surface scatter properties in standard stray light analyses when determining solar keep-out efficiency. In particular, the scattered light analysis of these two instruments shows that standard "one bounce" assumptions in baffle design are not always enough to prevent scattered sunlight from reaching the instrument focal plane. Future builds, such as JUICE-UVS, will implement improved scattered and stray light modeling early in the design phase to enhance capabilities in extended mission science phases, as well as optimize solar keep out volume.

Glasses-type wearable computer displays: usability considerations examined with a 3D glasses case study.

PubMed

Chang, Joonho; Moon, Seung Ki; Jung, Kihyo; Kim, Wonmo; Parkinson, Matthew; Freivalds, Andris; Simpson, Timothy W; Baik, Seon Pill

2018-05-01

This study presents usability considerations and solutions for the design of glasses-type wearable computer displays and examines their effectiveness in a case study. Design countermeasures were investigated by a four-step design process: (1) preliminary design analysis; (2) design idea generation; (3) final design selection; and (4) virtual fitting trial. Three design interventions were devised from the design process: (1) weight balance to reduce pressure concentrated on the nose, (2) compliant temples to accommodate diverse head sizes and (3) a hanger mechanism to help spectacle users hang their wearable display on their eye glasses. To investigate their effectiveness, in the case study, the novel 3D glasses adopting the three interventions were compared with two existing 3D glasses in terms of neck muscle fatigue and subjective discomfort rating. While neck muscle fatigue was not significantly different among the three glasses (p = 0.467), the novel glasses had significantly smaller discomfort ratings (p = 0.009). Relevance to Industry: A four-step design process identified usability considerations and solutions for the design of glasses-type wearable computer displays. A novel 3D glasses was proposed through the process and its effectiveness was validated. The results identify design considerations and opportunities relevant to the emerging wearable display industry.

Shuttle considerations for the design of large space structures

NASA Technical Reports Server (NTRS)

Roebuck, J. A., Jr.

1980-01-01

Shuttle related considerations (constraints and guidelines) are compiled for use by designers of a potential class of large space structures which are transported to orbit and, deployed, fabricated or assembled in space using the Space Shuttle Orbiter. Considerations of all phases of shuttle operations from launch to ground turnaround operations are presented. Design of large space structures includes design of special construction fixtures and support equipment, special stowage cradles or pallets, special checkout maintenance, and monitoring equipment, and planning for packaging into the orbiter of all additional provisions and supplies chargeable to payload. Checklists of design issues, Shuttle capabilities constraints and guidelines, as well as general explanatory material and references to source documents are included.

Methodological and practical viewpoints of qualitative-driven mixed method design: the case of decentralisation of primary healthcare services in Nepal.

PubMed

Regmi, Krishna

2018-01-01

Although considerable attention has been paid to the use of quantitative methods in health research, there has been limited focus on decentralisation research using a qualitative-driven mixed method design. Decentralisation presents both a problematic concept and methodological challenges, and is more context-specific and is often multi-dimensional. Researchers often consider using more than one method design when researching phenomena is complex in nature. Aim To explore the effects of decentralisation on the provision of primary healthcare services. Qualitative-driven mixed method design, employing three methods of data collections: focus group discussions (FGDs), semi-structured interviews (SSIs) and participant observations under two components, that is, core component and supplementary components were used. Four FGDs with health service practitioners, three FGDs with district stakeholders, 20 SSIs with health service users and 20 SSIs with national stakeholders were carried out. These were conducted sequentially. NVivo10, a data management program, was utilised to code the field data, employing a content analysis method for searching the underlying themes or concepts in the text material. Findings Both positive and negative experiences related to access, quality, planning, supplies, coordination and supervision were identified. This study suggests some evidence of the effects of decentralisation on health outcomes in general, as well as filling a gap of understanding and examining healthcare through a qualitative-driven mixed methods approach, in particular. Future research in the area of qualitative in-depth understanding of the problems (why decentralisation, why now and what for) would provoke an important data set that benefits the researchers and policy-makers for planning and implementing effective health services.

Methodological issues with adaptation of clinical trial design.

PubMed

Hung, H M James; Wang, Sue-Jane; O'Neill, Robert T

2006-01-01

Adaptation of clinical trial design generates many issues that have not been resolved for practical applications, though statistical methodology has advanced greatly. This paper focuses on some methodological issues. In one type of adaptation such as sample size re-estimation, only the postulated value of a parameter for planning the trial size may be altered. In another type, the originally intended hypothesis for testing may be modified using the internal data accumulated at an interim time of the trial, such as changing the primary endpoint and dropping a treatment arm. For sample size re-estimation, we make a contrast between an adaptive test weighting the two-stage test statistics with the statistical information given by the original design and the original sample mean test with a properly corrected critical value. We point out the difficulty in planning a confirmatory trial based on the crude information generated by exploratory trials. In regards to selecting a primary endpoint, we argue that the selection process that allows switching from one endpoint to the other with the internal data of the trial is not very likely to gain a power advantage over the simple process of selecting one from the two endpoints by testing them with an equal split of alpha (Bonferroni adjustment). For dropping a treatment arm, distributing the remaining sample size of the discontinued arm to other treatment arms can substantially improve the statistical power of identifying a superior treatment arm in the design. A common difficult methodological issue is that of how to select an adaptation rule in the trial planning stage. Pre-specification of the adaptation rule is important for the practicality consideration. Changing the originally intended hypothesis for testing with the internal data generates great concerns to clinical trial researchers.

Primary cerebral lymphoma: clinical and aeromedical considerations.

PubMed

Storms, Patrick R

2007-04-01

Cancer, and the complications of cancer therapy, can present significant obstacles to the airman wishing to return to flying status. If found to be free of recurrent lymphoma and to be neurologically intact after completion of therapy, applicants can be considered for a time-limited medical certificate, provided that they are otherwise qualified. Long-term follow up of patients must include not only disease-free survival time, but also serial neuropsychometric evaluation and quality-of-life assessments. This case illustrates the aeromedical considerations and certification issues for a patient presenting with performance issues progressing to discreet neurological findings, culminating in the diagnosis and treatment of primary central nervous system (CNS) lymphoma.

A wireless power transmission system for an active capsule endoscope for colon inspection.

PubMed

Jia, Zhiwei; Yan, Guozheng; Shi, Yu; Zhu, Bingquan

2012-07-01

Multipurpose active capsule endoscopes (ACE) have drawn considerable attention in recent years, but these devices continue to suffer from energy limitations. In order to deliver stable and sufficient energy safely, a wireless power transmission system based on inductive coupling is presented. The system consists of a double-layer solenoid pair primary coil outside and a multiple secondary coils inside the body. At least 500 mW usable power can be transmitted under the worst geometrical conditions and the safety restraints in a volume of Φ13 × 13 mm. The wireless power transmission system is integrated to an ACE and applied in animal experiments. The designed wireless power transmission is proved to be feasible and potentially safe in a future application.

Moving to senior school: an under-exploited opportunity to teach nutrition?

NASA Astrophysics Data System (ADS)

Bullen, Kathryn; Benton, David

2004-03-01

The effect of age on the way that children aged 7-16 years classify food was examined in a cross-section of Welsh school children. Primary school children were interviewed and invited to classify photographs of food into groups. Secondary school children undertook a similar task using cards on which were written the names of foods. Although by 7 years of age children had well-established food classification strategies, there are considerable differences between those used by older and younger children. A time of particular change was seen in the use of classification labels during the first year of senior school with children aged 11-12. Potential implications of the findings for the design and implementation of nutrition education programmes are considered.

Apollo experience report: Guidance and control systems. Engineering simulation program

NASA Technical Reports Server (NTRS)

Gilbert, D. W.

1973-01-01

The Apollo Program experience from early 1962 to July 1969 with respect to the engineering-simulation support and the problems encountered is summarized in this report. Engineering simulation in support of the Apollo guidance and control system is discussed in terms of design analysis and verification, certification of hardware in closed-loop operation, verification of hardware/software compatibility, and verification of both software and procedures for each mission. The magnitude, time, and cost of the engineering simulations are described with respect to hardware availability, NASA and contractor facilities (for verification of the command module, the lunar module, and the primary guidance, navigation, and control system), and scheduling and planning considerations. Recommendations are made regarding implementation of similar, large-scale simulations for future programs.

Status of Simulations for the Cyclotron Laboratory at the Institute for Nuclear Research and Nuclear Energy

NASA Astrophysics Data System (ADS)

Asova, G.; Goutev, N.; Tonev, D.; Artinyan, A.

2018-05-01

The Institute for Nuclear Research and Nuclear Energy is preparing to operate a high-power cyclotron for production of radioisotopes for nuclear medicine, research in radiochemistry, radiobiology, nuclear physics, solid state physics. The cyclotron is a TR24 produced by ASCI, Canada, capable to deliver proton beams in the energy range of 15 to 24 MeV with current as high as 400 µA. Multiple extraction lines can be fed. The primary goal of the project is the production of PET and SPECT isotopes as 18F, 67,68Ga, 99mTc, etc. This contribution reports the status of the project. Design considerations for the cyclotron vault will be discussed for some of the target radioisotopes.

Being Accountable or Filling in Forms: Managers and Clinicians' Views About Communicating Risk.

PubMed

Clancy, Leonie; Happell, Brenda

2017-01-01

Assessment, documentation, and prevention of risk are central to mental health services. However, there is a paucity of research examining how risk is perceived by key stakeholders including managers and clinicians. Qualitative, exploratory design. In-depth interviews were held with 22 senior managers and 21 clinicians. Communicating risk was a major theme to emerge. For managers, accountability was a primary consideration in communicating risk and therefore influential over nursing practice. Clinicians were more likely to view the organizational processes of communicating risk as a bureaucratic exercise. The significant difference between managers and clinicians is problematic for achieving consumer-focused mental health service delivery, a more critical approach to risk is essential in preserving the therapeutic relationship. © 2015 Wiley Periodicals, Inc.

Operational Results From a High Power Alternator Test Bed

NASA Technical Reports Server (NTRS)

Birchenough, Arthur; Hervol, David

2007-01-01

The Alternator Test Unit (ATU) in the Lunar Power System Facility (LPSF) located at the NASA Glenn Research Center (GRC) in Cleveland, Ohio was used to simulate the operating conditions and evaluate the performance of the ATU and its interaction with various LPSF components in accordance with the current Fission Surface Power System (FSPS) requirements. The testing was carried out at the breadboard development level. These results successfully demonstrated excellent ATU power bus characteristics and rectified user load power quality during steady state and transient conditions. Information gained from this work could be used to assist the design and primary power quality considerations for a possible future FSPS. This paper describes the LPSF components and some preliminary test results.

Reducing Fatal Opioid Overdose: Prevention, Treatment and Harm Reduction Strategies

PubMed Central

Hawk, Kathryn F.; Vaca, Federico E.; D’Onofrio, Gail

2015-01-01

The opioid overdose epidemic is a major threat to the public’s health, resulting in the development and implementation of a variety of strategies to reduce fatal overdose [1-3]. Many strategies are focused on primary prevention and increased access to effective treatment, although the past decade has seen an exponential increase in harm reduction initiatives. To maximize identification of opportunities for intervention, initiatives focusing on prevention, access to effective treatment, and harm reduction are examined independently, although considerable overlap exists. Particular attention is given to harm reduction approaches, as increased public and political will have facilitated widespread implementation of several initiatives, including increased distribution of naloxone and policy changes designed to increase bystander assistance during a witnessed overdose [4-7]. PMID:26339206

The NASA Aerospace Battery Safety Handbook

NASA Technical Reports Server (NTRS)

Halpert, Gerald; Subbarao, Surampudi; Rowlette, John J.

1986-01-01

This handbook has been written for the purpose of acquainting those involved with batteries with the information necessary for the safe handling, storage, and disposal of these energy storage devices. Included in the document is a discussion of the cell and battery design considerations and the role of the components within a cell. The cell and battery hazards are related to user- and/or manufacturer-induced causes. The Johnson Space Center (JSC) Payload Safety Guidelines for battery use in Shuttle applications are also provided. The electrochemical systems are divided into zinc anode and lithium anode primaries, secondary cells, and fuel cells. Each system is briefly described, typical applications are given, advantages and disadvantages are tabulated, and most importantly, safety hazards associated with its use are given.

The Disposal of Spacecraft and Launch Vehicle Stages in Low Earth Orbit

NASA Technical Reports Server (NTRS)

Johnson, Nicholas L.

2007-01-01

Spacecraft and launch vehicle stages abandoned in Earth orbit have historically been a primary source of debris from accidental explosions. In the future, such satellites will become the principal cause of orbital debris via inadvertent collisions. To curtail both the near-term and far-term risks posed by derelict spacecraft and launch vehicle stages to operational space systems, numerous national and international orbital debris mitigation guidelines specifically recommend actions which could prevent or limit such future debris generation. Although considerable progress has been made in implementing these recommendations, some changes to existing vehicle designs can be difficult. Moreover, the nature of some missions also can present technological and budgetary challenges to be compliant with widely accepted orbital debris mitigation measures.

Joint optimization of source, mask, and pupil in optical lithography

NASA Astrophysics Data System (ADS)

Li, Jia; Lam, Edmund Y.

2014-03-01

Mask topography effects need to be taken into consideration for more advanced resolution enhancement techniques in optical lithography. However, rigorous 3D mask model achieves high accuracy at a large computational cost. This work develops a combined source, mask and pupil optimization (SMPO) approach by taking advantage of the fact that pupil phase manipulation is capable of partially compensating for mask topography effects. We first design the pupil wavefront function by incorporating primary and secondary spherical aberration through the coefficients of the Zernike polynomials, and achieve optimal source-mask pair under the condition of aberrated pupil. Evaluations against conventional source mask optimization (SMO) without incorporating pupil aberrations show that SMPO provides improved performance in terms of pattern fidelity and process window sizes.

Primary angle closure glaucoma in a myopic kinship.

PubMed

Hagan, J C; Lederer, C M

1985-03-01

Three related myopic individuals with primary angle closure glaucoma are reported. They had true myopia and not pseudomyopia secondary to increased lenticular index of refraction. We believe one of these individuals (-8.62 spherical equivalent) to have the most myopic case of primary angle closure glaucoma reported in the literature. Although myopia is associated with anatomical factors that offer considerable protection from primary angle closure glaucoma, its presence does not eliminate the possibility of this disease. Laser iridectomy was effective in the treatment of these patients.

Overlay Tolerances For VLSI Using Wafer Steppers

NASA Astrophysics Data System (ADS)

Levinson, Harry J.; Rice, Rory

1988-01-01

In order for VLSI circuits to function properly, the masking layers used in the fabrication of those devices must overlay each other to within the manufacturing tolerance incorporated in the circuit design. The capabilities of the alignment tools used in the masking process determine the overlay tolerances to which circuits can be designed. It is therefore of considerable importance that these capabilities be well characterized. Underestimation of the overlay accuracy results in unnecessarily large devices, resulting in poor utilization of wafer area and possible degradation of device performance. Overestimation will result in significant yield loss because of the failure to conform to the tolerances of the design rules. The proper methodology for determining the overlay capabilities of wafer steppers, the most commonly used alignment tool for the production of VLSI circuits, is the subject of this paper. Because cost-effective manufacturing process technology has been the driving force of VLSI, the impact on productivity is a primary consideration in all discussions. Manufacturers of alignment tools advertise the capabilities of their equipment. It is notable that no manufacturer currently characterizes his aligners in a manner consistent with the requirements of producing very large integrated circuits, as will be discussed. This has resulted in the situation in which the evaluation and comparison of the capabilities of alignment tools require the attention of a lithography specialist. Unfortunately, lithographic capabilities must be known by many other people, particularly the circuit designers and the managers responsible for the financial consequences of the high prices of modern alignment tools. All too frequently, the designer or manager is confronted with contradictory data, one set coming from his lithography specialist, and the other coming from a sales representative of an equipment manufacturer. Since the latter generally attempts to make his merchandise appear as attractive as possible, the lithographer is frequently placed in the position of having to explain subtle issues in order to justify his decisions. It is the purpose of this paper to provide that explanation.

Effective Feedback to Improve Primary Care Prescribing Safety (EFIPPS) a pragmatic three-arm cluster randomised trial: designing the intervention (ClinicalTrials.gov registration NCT01602705).

PubMed

Barnett, Karen N; Bennie, Marion; Treweek, Shaun; Robertson, Christopher; Petrie, Dennis J; Ritchie, Lewis D; Guthrie, Bruce

2014-10-11

High-risk prescribing in primary care is common and causes considerable harm. Feedback interventions have small/moderate effects on clinical practice, but few trials explicitly compare different forms of feedback. There is growing recognition that intervention development should be theory-informed, and that comprehensive reporting of intervention design is required by potential users of trial findings. The paper describes intervention development for the Effective Feedback to Improve Primary Care Prescribing Safety (EFIPPS) study, a pragmatic three-arm cluster randomised trial in 262 Scottish general practices. The NHS chose to implement a feedback intervention to utilise a new resource, new Prescribing Information System (newPIS). The development phase required selection of high-risk prescribing outcome measures and design of intervention components: (1) educational material (the usual care comparison), (2) feedback of practice rates of high-risk prescribing received by both intervention arms and (3) a theory-informed behaviour change component to be received by one intervention arm. Outcome measures, educational material and feedback design, were developed with a National Health Service Advisory Group. The behaviour change component was informed by the Theory of Planned Behaviour and the Health Action Process Approach. A focus group elicitation study and an email Delphi study with general practitioners (GPs) identified key attitudes and barriers of responding to the prescribing feedback. Behaviour change techniques were mapped to the psychological constructs, and the content was informed by the results of the elicitation and Delphi study. Six high-risk prescribing measures were selected in a consensus process based on importance and feasibility. Educational material and feedback design were based on current NHS Scotland practice and Advisory Group recommendations. The behaviour change component was resource constrained in development, mirroring what is feasible in an NHS context. Four behaviour change interventions were developed and embedded in five quarterly rounds of feedback targeting attitudes, subjective norms, perceived behavioural control and action planning (2×). The paper describes a process which is feasible to use in the resource-constrained environment of NHS-led intervention development and documents the intervention to make its design and implementation explicit to potential users of the trial findings. ClinicalTrials.gov: NCT01602705.

LABORATORY DESIGN CONSIDERATIONS FOR SAFETY.

ERIC Educational Resources Information Center

National Safety Council, Chicago, IL. Campus Safety Association.

THIS SET OF CONSIDERATIONS HAS BEEN PREPARED TO PROVIDE PERSONS WORKING ON THE DESIGN OF NEW OR REMODELED LABORATORY FACILITIES WITH A SUITABLE REFERENCE GUIDE TO DESIGN SAFETY. THERE IS NO DISTINCTION BETWEEN TYPES OF LABORATORY AND THE EMPHASIS IS ON GIVING GUIDES AND ALTERNATIVES RATHER THAN DETAILED SPECIFICATIONS. AREAS COVERED INCLUDE--(1)…

Design considerations for space flight hardware

NASA Technical Reports Server (NTRS)

Glover, Daniel

1990-01-01

The environmental and design constraints are reviewed along with some insight into the established design and quality assurance practices that apply to low earth orbit (LEO) space flight hardware. It is intended as an introduction for people unfamiliar with space flight considerations. Some basic data and a bibliography are included.

Optimum Design of High Speed Prop-Rotors

NASA Technical Reports Server (NTRS)

Chattopadhyay, Aditi

1992-01-01

The objective of this research is to develop optimization procedures to provide design trends in high speed prop-rotors. The necessary disciplinary couplings are all considered within a closed loop optimization process. The procedures involve the consideration of blade aeroelastic, aerodynamic performance, structural and dynamic design requirements. Further, since the design involves consideration of several different objectives, multiobjective function formulation techniques are developed.

Simultaneous sequential monitoring of efficacy and safety led to masking of effects.

PubMed

van Eekelen, Rik; de Hoop, Esther; van der Tweel, Ingeborg

2016-08-01

Usually, sequential designs for clinical trials are applied on the primary (=efficacy) outcome. In practice, other outcomes (e.g., safety) will also be monitored and influence the decision whether to stop a trial early. Implications of simultaneous monitoring on trial decision making are yet unclear. This study examines what happens to the type I error, power, and required sample sizes when one efficacy outcome and one correlated safety outcome are monitored simultaneously using sequential designs. We conducted a simulation study in the framework of a two-arm parallel clinical trial. Interim analyses on two outcomes were performed independently and simultaneously on the same data sets using four sequential monitoring designs, including O'Brien-Fleming and Triangular Test boundaries. Simulations differed in values for correlations and true effect sizes. When an effect was present in both outcomes, competition was introduced, which decreased power (e.g., from 80% to 60%). Futility boundaries for the efficacy outcome reduced overall type I errors as well as power for the safety outcome. Monitoring two correlated outcomes, given that both are essential for early trial termination, leads to masking of true effects. Careful consideration of scenarios must be taken into account when designing sequential trials. Simulation results can help guide trial design. Copyright © 2016 Elsevier Inc. All rights reserved.

High transonic speed transport aircraft study. [aerodynamic characteristics of single-fuselage, yawed-wing configuration

NASA Technical Reports Server (NTRS)

Kulfan, R. M.; Neumann, F. D.; Nisbet, J. W.; Mulally, A. R.; Murakami, J. K.; Noble, E. C.; Mcbarron, J. P.; Stalter, J. L.; Gimmestad, D. W.; Sussman, M. B.

1973-01-01

An initial design study of high-transonic-speed transport aircraft has been completed. Five different design concepts were developed. These included fixed swept wing, variable-sweep wing, delta wing, double-fuselage yawed-wing, and single-fuselage yawed-wing aircraft. The boomless supersonic design objectives of range=5560 Km (3000 nmi), payload-18 143 kg (40 000lb), Mach=1.2, and FAR Part 36 aircraft noise levels were achieved by the single-fuselage yawed-wing configuration with a gross weight of 211 828 Kg (467 000 lb). A noise level of 15 EPNdB below FAR Part 36 requirements was obtained with a gross weight increase to 226 796 Kg (500 000 lb). Although wing aeroelastic divergence was a primary design consideration for the yawed-wing concepts, the graphite-epoxy wings of this study were designed by critical gust and maneuver loads rather than by divergence requirements. The transonic nacelle drag is shown to be very sensitive to the nacelle installation. A six-degree-of-freedom dynamic stability analysis indicated that the control coordination and stability augmentation system would require more development than for a symmetrical airplane but is entirely feasible. A three-phase development plan is recommended to establish the full potential of the yawed-wing concept.

Crossing the Primary and Secondary School Divide in Teacher Preparation

ERIC Educational Resources Information Center

Knipe, Sally

2012-01-01

Teacher education courses at universities qualify graduates to teach in age-related contexts of primary/early childhood/secondary that reflect the organisational structure of schools. In terms of teacher employment, for some considerable time, these longstanding organisational divisions have been by-passed whereby a shortage of teachers in…

Big Ideas in Primary Mathematics: Issues and Directions

ERIC Educational Resources Information Center

Askew, Mike

2013-01-01

This article is located within the literature arguing for attention to Big Ideas in teaching and learning mathematics for understanding. The focus is on surveying the literature of Big Ideas and clarifying what might constitute Big Ideas in the primary Mathematics Curriculum based on both theoretical and pragmatic considerations. This is…

Depression in primary care: assessing suicide risk

PubMed Central

Ng, Chung Wai Mark; How, Choon How; Ng, Yin Ping

2017-01-01

Major depression is a common condition seen in the primary care setting. This article describes the suicide risk assessment of a depressed patient, including practical aspects of history-taking, consideration of factors in deciding if a patient requires immediate transfer for inpatient care and measures to be taken if the patient is not hospitalised. It follows on our earlier article about the approach to management of depression in primary care. PMID:28210741

31 CFR 19.445 - What action may I take if a primary tier participant knowingly does business with an excluded or...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance: Treasury 1 2011-07-01 2011-07-01 false What action may I take if a primary... § 19.445 What action may I take if a primary tier participant knowingly does business with an excluded... person, you as an agency official may refer the matter for suspension and debarment consideration. You...

5 CFR 919.445 - What action may I take if a primary tier participant knowingly does business with an excluded or...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 2 2011-01-01 2011-01-01 false What action may I take if a primary tier... § 919.445 What action may I take if a primary tier participant knowingly does business with an excluded... person, you as an agency official may refer the matter for suspension and debarment consideration. You...

21 CFR 1404.445 - What action may I take if a primary tier participant knowingly does business with an excluded or...

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 9 2011-04-01 2011-04-01 false What action may I take if a primary tier... § 1404.445 What action may I take if a primary tier participant knowingly does business with an excluded... person, you as an agency official may refer the matter for suspension and debarment consideration. You...

2 CFR 180.440 - What action may I take if a primary tier participant knowingly does business with an excluded or...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 2 Grants and Agreements 1 2011-01-01 2011-01-01 false What action may I take if a primary tier... Transactions § 180.440 What action may I take if a primary tier participant knowingly does business with an... person, you as a Federal agency official may refer the matter for suspension and debarment consideration...

Access of Rural Girls to Primary Education in the Third World: State of Art, Obstacles, and Policy Recommendations.

ERIC Educational Resources Information Center

Safilios-Rothschild, Constantina

In the Third World, women's literacy and access to primary education lags behind that of men, and the situation is more accentuated for rural than for urban women. In general, rural women have lower literacy than rural men and than urban women. Because a considerable percentage of girls enrolled in primary school are over 14 years old, marriage,…

Modeling the impact of spatial relationships on horizontal curve safety.

PubMed

Findley, Daniel J; Hummer, Joseph E; Rasdorf, William; Zegeer, Charles V; Fowler, Tyler J

2012-03-01

The curved segments of roadways are more hazardous because of the additional centripetalforces exerted on a vehicle, driver expectations, and other factors. The safety of a curve is dependent on various factors, most notably by geometric factors, but the location of a curve in relation to other curves is also thought to influence the safety of those curves because of a driver's expectation to encounter additional curves. The link between an individual curve's geometric characteristics and its safety performance has been established, but spatial considerations are typically not included in a safety analysis. The spatial considerations included in this research consisted of four components: distance to adjacent curves, direction of turn of the adjacent curves, and radius and length of the adjacent curves. The primary objective of this paper is to quantify the spatial relationship between adjacent horizontal curves and horizontal curve safety using a crash modification factor. Doing so enables a safety professional to more accurately estimate safety to allocate funding to reduce or prevent future collisions and more efficiently design new roadway sections to minimize crash risk where there will be a series of curves along a route. The most important finding from this research is the statistical significance of spatial considerations for the prediction of horizontal curve safety. The distances to adjacent curves were found to be a reliable predictor of observed collisions. This research recommends a model which utilizes spatial considerations for horizontal curve safety prediction in addition to current Highway Safety Manual prediction capabilities using individual curve geometric features. Copyright © 2011 Elsevier Ltd. All rights reserved.

Towards a systems approach to risk considerations for concurrent design

NASA Technical Reports Server (NTRS)

Meshkat, Leila; Oberto, Robert E.

2004-01-01

This paper describes the new process used by the Project Design Center at NASA's Jet Propulsion Laboratory for the identification, assessment and communication of risk elements throughout the lifecycle of a mission design. This process includes a software tool, 'RAP' that collects and communicates risk information between the various designers and a 'risk expert' who mediates this process. The establishment of this process is an attempt towards the systematic consideration of risk in the design decision making process. Using this process, we are able to better keep track of the risks associated with the design decisions. Furthermore, it helps us develop better risk profiles for the studies under consideration. We aim to refine and expand the current process to enable more thorough risk analysis capabilities in the future.

Characterization of interdigitated electrode piezoelectric fiber composites under high electrical and mechanical loading

NASA Astrophysics Data System (ADS)

Rodgers, John P.; Bent, Aaron A.; Hagood, Nesbitt W.

1996-05-01

The primary objective of this work is to develop a standard methodology for characterizing structural actuation systems intended for operation in high electrical and mechanical loading environments. The designed set of tests evaluates the performance of the active materials system under realistic operating conditions. The tests are also used to characterize piezoelectric fiber composites which have been developed as an alternative to monolithic piezoceramic wafers for structural actuation applications. The performance of this actuator system has been improved using an interdigitated electrode pattern, which orients the primary component of the electric field into the plane of the structure, enabling the use of the primary piezoelectric effect along the active fibers. One possible application of this technology is in the integral twist actuation of helicopter rotor blades for higher harmonic control. This application requires actuators which can withstand the harsh rotor blade operating environment. This includes large numbers of electrical and mechanical cycles with considerable centripetal and bending loads. The characterization tests include standard active material tests as well as application-driven tests which evaluate the performance of the actuators during simulated operation. Test results for several actuator configurations are provided, including S2 glass- reinforced and E-glass laminated actuators. The study concludes that the interdigitated electrode piezoelectric fiber composite actuator has great potential for high loading applications.

Future provision of out of hours primary medical care: a survey with two general practitioner research networks.

PubMed Central

Lattimer, V.; Smith, H.; Hungin, P.; Glasper, A.; George, S.

1996-01-01

OBJECTIVE--To ascertain general practitioners' views about the future provision of out of hours primary medical care. DESIGN--Self completing postal questionnaire survey. SETTING--Wessex and north east England. SUBJECTS--116 general practitioners in the Wessex Primary Care Research Network and 83 in the Northern Primary Care Research Network. MAIN OUTCOME MEASURES--Intention to reduce or opt out of on call; plans for changing out of hours arrangements; the three most important changes needed to out of hours care; willingness to try, and perceived strengths and limitations of, three alternative out of hours care models--primary care emergency centres, telephone triage services, and cooperatives. RESULTS--The overall response rate was 74% (Wessex research network 77% (89/116), northern research network 71% (59/83)). Eighty three per cent of respondents (123/148) were willing to try at least one service model, primary care emergency centres being the most popular option. Key considerations were the potential for a model to reduce time on call and workload, to maintain continuity of care, and to fit the practice context. Sixty one per cent (91/148) hoped to reduce time on call and 25% (37/148) hoped to opt out completely. CONCLUSIONS--General practitioners were keen to try alternative arrangements for out of hours care delivery, despite the lack of formal trials. The increased flexibility in funding brought about by the recent agreement between the General Medical Services Committee and the Department of Health is likely to lead to a proliferation of different schemes. Careful monitoring will be necessary, and formal trials of new service models are needed urgently. PMID:8611835

Flow Distribution Control Characteristics in Marine Gas Turbine Waste- Heat Recovery Systems. Phase 2. Flow Distribution Control in Waste-Heat Steam Generators

DTIC Science & Technology

1982-07-01

waste-heat steam generators. The applicable steam generator design concepts and general design consideration were reviewed and critical problems...a once-through forced-circulation steam generator design should be selected because of stability, reliability, compact- ness and lightweight...consists of three sections and one appendix. In Section I, the applicable steam generator design conccpts and general design * considerations are reviewed

Staff Nurse Perceptions of Open-Pod and Single Family Room NICU Designs on Work Environment and Patient Care.

PubMed

Winner-Stoltz, Regina; Lengerich, Alexander; Hench, Anna Jeanine; OʼMalley, Janet; Kjelland, Kimberly; Teal, Melissa

2018-06-01

Neonatal intensive care units have historically been constructed as open units or multiple-bed bays, but since the 1990s, the trend has been toward single family room (SFR) units. The SFR design has been found to promote family-centered care and to improve patient outcomes and safety. The impact of the SFR design NICU on staff, however, has been mixed. The purposes of this study were to compare staff nurse perceptions of their work environments in an open-pod versus an SFR NICU and to compare staff nurse perceptions of the impact of 2 NICU designs on the care they provide for patients/families. A prospective cohort study was conducted. Questionnaires were completed at 6 months premove and again at 3, 9, and 15 months postmove. A series of 1-way analyses of variance were conducted to compare each group in each of the 8 domains. Open-ended questions were evaluated using thematic analysis. The SFR design is favorable in relation to environmental quality and control of primary workspace, privacy and interruption, unit features supporting individual work, and unit features supporting teamwork; the open-pod design is preferable in relation to walking. Incorporating design features that decrease staff isolation and walking and ensuring both patient and staff safety and security are important considerations. Further study is needed on unit design at a microlevel including headwall design and human milk mixing areas, as well as on workflow processes.

Enhancements in mass transfer for carbon capture solvents part I: Homogeneous catalyst

DOE PAGES

Widger, Leland R.; Sarma, Moushumi; Bryant, Jonathan J.; ...

2017-06-15

The novel small molecule carbonic anhydrase (CA) mimic [Co III(Salphen-COO -)Cl]HNEt 3 ( 1), was synthesized as an additive for increasing CO 2 absorption rates in amine-based post-combustion carbon capture processes (CCS), and its efficacy was verified. 1 was designed for use in a kinetically slow but thermally stable blended solvent, containing the primary amines 1-amino-2-propanol (A2P) and 2-amino-2-methyl-1-propanol (AMP). Together, the A2P/AMP solvent and 1 reduce the overall energy penalty associated with CO 2 capture from coal-derived flue gas, relative to the baseline solvent MEA. 1 is also effective at increasing absorption kinetics of kinetically fast solvents, such asmore » MEA, which can reduce capital costs by requiring a smaller absorber tower. The transition from catalyst testing under idealized laboratory conditions, to process relevant lab- and bench-scale testing adds many additional variables that are not well understood and rarely discussed. As a result, the stepwise testing of both 1 and the novel A2P/AMP solvent blend is described through a transition process that identifies many of these process and evaluation challenges not often addressed when designing a chemical or catalytic additive for industrial CCS systems, where consideration of solvent chemistry is typically the primary goal.« less

Enhancements in mass transfer for carbon capture solvents part II: Micron-sized solid particles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mannel, David S.; Qi, Guojie; Widger, Leland R.

2017-06-01

The novel small molecule carbonic anhydrase (CA) mimic [CoIII(Salphen-COO-)Cl]HNEt3 (1), was synthesized as an additive for increasing CO2 absorption rates in amine-based post-combustion carbon capture processes (CCS), and its efficacy was verified. 1 was designed for use in a kinetically slow but thermally stable blended solvent, containing the primary amines 1-amino-2-propanol (A2P) and 2-amino-2-methyl-1-propanol (AMP). Together, the A2P/AMP solvent and 1 reduce the overall energy penalty associated with CO2 capture from coal-derived flue gas, relative to the baseline solvent MEA. 1 is also effective at increasing absorption kinetics of kinetically fast solvents, such as MEA, which can reduce capital costsmore » by requiring a smaller absorber tower. The transition from catalyst testing under idealized laboratory conditions, to process relevant lab- and bench-scale testing adds many additional variables that are not well understood and rarely discussed. The stepwise testing of both 1 and the novel A2P/AMP solvent blend is described through a transition process that identifies many of these process and evaluation challenges not often addressed when designing a chemical or catalytic additive for industrial CCS systems, where consideration of solvent chemistry is typically the primary goal.« less

Quasi-experimental designs in practice-based research settings: design and implementation considerations.

PubMed

Handley, Margaret A; Schillinger, Dean; Shiboski, Stephen

2011-01-01

Although randomized controlled trials are often a gold standard for determining intervention effects, in the area of practice-based research (PBR), there are many situations in which individual randomization is not possible. Alternative approaches to evaluating interventions have received increased attention, particularly those that can retain elements of randomization such that they can be considered "controlled" trials. Methodological design elements and practical implementation considerations for two quasi-experimental design approaches that have considerable promise in PBR settings--the stepped-wedge design, and a variant of this design, a wait-list cross-over design, are presented along with a case study from a recent PBR intervention for patients with diabetes. PBR-relevant design features include: creation of a cohort over time that collects control data but allows all participants (clusters or patients) to receive the intervention; staggered introduction of clusters; multiple data collection points; and one-way cross-over into the intervention arm. Practical considerations include: randomization versus stratification, training run in phases; and extended time period for overall study completion. Several design features of practice based research studies can be adapted to local circumstances yet retain elements to improve methodological rigor. Studies that utilize these methods, such as the stepped-wedge design and the wait-list cross-over design, can increase the evidence base for controlled studies conducted within the complex environment of PBR.

Guidelines for Genome-Scale Analysis of Biological Rhythms.

PubMed

Hughes, Michael E; Abruzzi, Katherine C; Allada, Ravi; Anafi, Ron; Arpat, Alaaddin Bulak; Asher, Gad; Baldi, Pierre; de Bekker, Charissa; Bell-Pedersen, Deborah; Blau, Justin; Brown, Steve; Ceriani, M Fernanda; Chen, Zheng; Chiu, Joanna C; Cox, Juergen; Crowell, Alexander M; DeBruyne, Jason P; Dijk, Derk-Jan; DiTacchio, Luciano; Doyle, Francis J; Duffield, Giles E; Dunlap, Jay C; Eckel-Mahan, Kristin; Esser, Karyn A; FitzGerald, Garret A; Forger, Daniel B; Francey, Lauren J; Fu, Ying-Hui; Gachon, Frédéric; Gatfield, David; de Goede, Paul; Golden, Susan S; Green, Carla; Harer, John; Harmer, Stacey; Haspel, Jeff; Hastings, Michael H; Herzel, Hanspeter; Herzog, Erik D; Hoffmann, Christy; Hong, Christian; Hughey, Jacob J; Hurley, Jennifer M; de la Iglesia, Horacio O; Johnson, Carl; Kay, Steve A; Koike, Nobuya; Kornacker, Karl; Kramer, Achim; Lamia, Katja; Leise, Tanya; Lewis, Scott A; Li, Jiajia; Li, Xiaodong; Liu, Andrew C; Loros, Jennifer J; Martino, Tami A; Menet, Jerome S; Merrow, Martha; Millar, Andrew J; Mockler, Todd; Naef, Felix; Nagoshi, Emi; Nitabach, Michael N; Olmedo, Maria; Nusinow, Dmitri A; Ptáček, Louis J; Rand, David; Reddy, Akhilesh B; Robles, Maria S; Roenneberg, Till; Rosbash, Michael; Ruben, Marc D; Rund, Samuel S C; Sancar, Aziz; Sassone-Corsi, Paolo; Sehgal, Amita; Sherrill-Mix, Scott; Skene, Debra J; Storch, Kai-Florian; Takahashi, Joseph S; Ueda, Hiroki R; Wang, Han; Weitz, Charles; Westermark, Pål O; Wijnen, Herman; Xu, Ying; Wu, Gang; Yoo, Seung-Hee; Young, Michael; Zhang, Eric Erquan; Zielinski, Tomasz; Hogenesch, John B

2017-10-01

Genome biology approaches have made enormous contributions to our understanding of biological rhythms, particularly in identifying outputs of the clock, including RNAs, proteins, and metabolites, whose abundance oscillates throughout the day. These methods hold significant promise for future discovery, particularly when combined with computational modeling. However, genome-scale experiments are costly and laborious, yielding "big data" that are conceptually and statistically difficult to analyze. There is no obvious consensus regarding design or analysis. Here we discuss the relevant technical considerations to generate reproducible, statistically sound, and broadly useful genome-scale data. Rather than suggest a set of rigid rules, we aim to codify principles by which investigators, reviewers, and readers of the primary literature can evaluate the suitability of different experimental designs for measuring different aspects of biological rhythms. We introduce CircaInSilico, a web-based application for generating synthetic genome biology data to benchmark statistical methods for studying biological rhythms. Finally, we discuss several unmet analytical needs, including applications to clinical medicine, and suggest productive avenues to address them.

Guidelines for Genome-Scale Analysis of Biological Rhythms

PubMed Central

Hughes, Michael E.; Abruzzi, Katherine C.; Allada, Ravi; Anafi, Ron; Arpat, Alaaddin Bulak; Asher, Gad; Baldi, Pierre; de Bekker, Charissa; Bell-Pedersen, Deborah; Blau, Justin; Brown, Steve; Ceriani, M. Fernanda; Chen, Zheng; Chiu, Joanna C.; Cox, Juergen; Crowell, Alexander M.; DeBruyne, Jason P.; Dijk, Derk-Jan; DiTacchio, Luciano; Doyle, Francis J.; Duffield, Giles E.; Dunlap, Jay C.; Eckel-Mahan, Kristin; Esser, Karyn A.; FitzGerald, Garret A.; Forger, Daniel B.; Francey, Lauren J.; Fu, Ying-Hui; Gachon, Frédéric; Gatfield, David; de Goede, Paul; Golden, Susan S.; Green, Carla; Harer, John; Harmer, Stacey; Haspel, Jeff; Hastings, Michael H.; Herzel, Hanspeter; Herzog, Erik D.; Hoffmann, Christy; Hong, Christian; Hughey, Jacob J.; Hurley, Jennifer M.; de la Iglesia, Horacio O.; Johnson, Carl; Kay, Steve A.; Koike, Nobuya; Kornacker, Karl; Kramer, Achim; Lamia, Katja; Leise, Tanya; Lewis, Scott A.; Li, Jiajia; Li, Xiaodong; Liu, Andrew C.; Loros, Jennifer J.; Martino, Tami A.; Menet, Jerome S.; Merrow, Martha; Millar, Andrew J.; Mockler, Todd; Naef, Felix; Nagoshi, Emi; Nitabach, Michael N.; Olmedo, Maria; Nusinow, Dmitri A.; Ptáček, Louis J.; Rand, David; Reddy, Akhilesh B.; Robles, Maria S.; Roenneberg, Till; Rosbash, Michael; Ruben, Marc D.; Rund, Samuel S.C.; Sancar, Aziz; Sassone-Corsi, Paolo; Sehgal, Amita; Sherrill-Mix, Scott; Skene, Debra J.; Storch, Kai-Florian; Takahashi, Joseph S.; Ueda, Hiroki R.; Wang, Han; Weitz, Charles; Westermark, Pål O.; Wijnen, Herman; Xu, Ying; Wu, Gang; Yoo, Seung-Hee; Young, Michael; Zhang, Eric Erquan; Zielinski, Tomasz; Hogenesch, John B.

2017-01-01

Genome biology approaches have made enormous contributions to our understanding of biological rhythms, particularly in identifying outputs of the clock, including RNAs, proteins, and metabolites, whose abundance oscillates throughout the day. These methods hold significant promise for future discovery, particularly when combined with computational modeling. However, genome-scale experiments are costly and laborious, yielding “big data” that are conceptually and statistically difficult to analyze. There is no obvious consensus regarding design or analysis. Here we discuss the relevant technical considerations to generate reproducible, statistically sound, and broadly useful genome-scale data. Rather than suggest a set of rigid rules, we aim to codify principles by which investigators, reviewers, and readers of the primary literature can evaluate the suitability of different experimental designs for measuring different aspects of biological rhythms. We introduce CircaInSilico, a web-based application for generating synthetic genome biology data to benchmark statistical methods for studying biological rhythms. Finally, we discuss several unmet analytical needs, including applications to clinical medicine, and suggest productive avenues to address them. PMID:29098954

Design considerations for the beamwaveguide retrofit of a ground antenna station

NASA Technical Reports Server (NTRS)

Veruttipong, T.; Withington, J.; Galindo-Israel, V.; Imbriale, W.; Bathker, D.

1987-01-01

A primary requirement of the NASA Deep Space Network (DSN) is to provide for optimal reception of very low signal levels. This requirement necessitates optimizing the antenna gain to the total system operating noise level quotient. Low overall system noise levels of 16 to 20 K are achieved by using cryogenically cooled preamplifiers closely coupled with an appropriately balanced antenna gain/spillover design. Additionally, high-power transmitters (up to 400 kW CW) are required for spacecraft emergency command and planetary radar experiments. The frequency bands allocated for deep space telemetry are narrow bands near 2.1 and 2.3 GHz (Ka-band), 7.1 and 8.4 GHz (X-band), and 32 and 34.5 GHz (Ka-band). In addition, planned operations for the Search for Extraterrestrial Intelligence (SETI) program require continuous low-noise receive coverage over the 1 to 10 GHz band. To summarize, DSN antennas must operate efficiently with low receive noise and high-power uplink over the 1 to 35 GHz band.

Major safety provisions in nuclear-powered ships

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khlopkin, N.S.; Belyaev, V.M.; Dubrovin, A.M.

1984-12-01

Considerable experience has been accumulated in the Soviet Union on the design, construction and operation of nuclear-powered civilian ships: the icebreakers Lenin, Leonid Brezhnev and Sibir. The nuclear steam plants (NSP) used on these as the main energy source have been found to be highly reliable and safe, and it is desirable to use them in the future not only in icebreakers but also in transport ships for use in ice fields. The Soviet program for building and developing nuclear-powered ships has involved careful attention to safety in ships containing NSP. The experience with the design and operation of nuclearmore » icebreakers in recent years has led to the revision of safety standards for the nuclear ships and correspondingly ship NSP and international guidelines have been developed. If one meets the requirements as set forth in these documents, one has a safe basis for future Soviet nuclear-powered ships. The primary safety provisions for NSP are presented in this paper.« less

Lightweight, Rack-Mountable Composite Cold Plate/Shelves

NASA Technical Reports Server (NTRS)

Hurlbert, Kathryn M.; Ruemmele, Warren; Nguyen, Hai D.; Andish, Kambiz; McCalley, Sean

2004-01-01

Rack-mountable composite-material structural components that would serve as both shelves and cold plates for removing heat from electronic or other equipment mounted on the shelves have been proposed as lightweight alternatives to all-metal cold plate/shelves now in use. A proposed cold plate/shelf would include a highly thermally conductive face sheet containing oriented graphite fibers bonded to an aluminum honeycomb core, plus an extruded stainless-steel substructure containing optimized flow passages for a cooling fluid, and an inlet and outlet that could be connected to standard manifold sections. To maximize heat-transfer efficiency, the extruded stainless-steel substructure would be connected directly to the face sheet. On the basis of a tentative design, the proposed composite cold plate/shelf would weigh about 38 percent less than does an all-aluminum cold plate in use or planned for use in some spacecraft and possibly aircraft. Although weight is a primary consideration, the tentative design offers the additional benefit of reduction of thickness to half that of the all-aluminum version.

Phase I/II adaptive design for drug combination oncology trials

PubMed Central

Wages, Nolan A.; Conaway, Mark R.

2014-01-01

Existing statistical methodology on dose finding for combination chemotherapies has focused on toxicity considerations alone in finding a maximum tolerated dose combination to recommend for further testing of efficacy in a phase II setting. Recently, there has been increasing interest in integrating phase I and phase II trials in order to facilitate drug development. In this article, we propose a new adaptive phase I/II method for dual-agent combinations that takes into account both toxicity and efficacy after each cohort inclusion. The primary objective, both within and at the conclusion of the trial, becomes finding a single dose combination with an acceptable level of toxicity that maximizes efficacious response. We assume that there exist monotone dose–toxicity and dose–efficacy relationships among doses of one agent when the dose of other agent is fixed. We perform extensive simulation studies that demonstrate the operating characteristics of our proposed approach, and we compare simulated results to existing methodology in phase I/II design for combinations of agents. PMID:24470329

Computer-delivered screening and brief intervention (e-SBI) for postpartum drug use: a randomized trial.

PubMed

Ondersma, Steven J; Svikis, Dace S; Thacker, Leroy R; Beatty, Jessica R; Lockhart, Nancy

2014-01-01

Electronic screening and brief intervention (e-SBI) approaches for substance use have shown early promise. This trial was designed to replicate previous findings from a single 20-minute e-SBI for drug use among postpartum women. A total of 143 postpartum, primarily low-income African-American women meeting criteria for drug use, were randomly assigned to either a tailored e-SBI or a time-matched control condition. Blinded follow-up evaluation 3- and 6-months following childbirth revealed strong effects for confirmed illicit drug use abstinence at the 3-month observation (OR=3.3, p=.01), as did hair analysis at 6months (OR=4.8, p=.018). Additional primary outcomes suggested small to moderate effect sizes in favor of the e-SBI, but did not reach significance. This result replicates previous findings but fails to show durable effects. Assessment reactivity, e-SBI design, and possible extension of e-SBI via tailored messaging all merit careful consideration. © 2013 Elsevier Inc. All rights reserved.

Habitat Design Considerations for Implementing Solar Particle Event Radiation Protection

NASA Technical Reports Server (NTRS)

Simon, Mathew A.; Clowdsley, Martha S.; Walker, Steven A.

2013-01-01

Radiation protection is an important habitat design consideration for human exploration missions beyond Low Earth Orbit. Fortunately, radiation shelter concepts can effectively reduce astronaut exposure for the relatively low proton energies of solar particle events, enabling moderate duration missions of several months before astronaut exposure (galactic cosmic ray and solar particle event) approaches radiation exposure limits. In order to minimize habitat mass for increasingly challenging missions, design of radiation shelters must minimize dedicated, single-purpose shielding mass by leveraging the design and placement of habitat subsystems, accommodations, and consumables. NASA's Advanced Exploration Systems RadWorks Storm Shelter Team has recently designed and performed radiation analysis on several low dedicated mass shelter concepts for a year-long mission. This paper describes habitat design considerations identified during the study's radiation analysis. These considerations include placement of the shelter within a habitat for improved protection, integration of human factors guidance for sizing shelters, identification of potential opportunities for habitat subsystems to compromise on individual subsystem performances for overall vehicle mass reductions, and pre-configuration of shelter components for reduced deployment times.

Zinc deficiency in children with environmental enteropathy—development of new strategies: report from an expert workshop1234

PubMed Central

Young, Graeme P; Mortimer, Elissa K; Gopalsamy, Geetha L; Alpers, David H; Binder, Henry J; Manary, Mark J; Ramakrishna, Balakrishnan S; Brown, Ian L; Brewer, Thomas G

2014-01-01

Zinc deficiency is a major cause of childhood morbidity and mortality. The WHO/UNICEF strategy for zinc supplementation as adjunctive therapy for diarrhea is poorly implemented. A conference of experts in zinc nutrition and gastrointestinal disorders was convened to consider approaches that might complement the current recommendation and what research was needed to develop these approaches. Several key points were identified. The design of novel zinc interventions would be facilitated by a better understanding of how disturbed gut function, such as environmental (or tropical) enteropathy, affects zinc absorption, losses, and homeostasis. Because only 10% of zinc stores are able to be rapidly turned over, and appear to be rapidly depleted by acute intestinal illness, they are probably best maintained by complementary regular supplementation in a primary prevention strategy rather than secondary prevention triggered by acute diarrhea. The assessment of zinc status is challenging and complex without simple, validated measures to facilitate field testing of novel interventions. Zinc bioavailability may be a crucial factor in the success of primary prevention strategies, and a range of options, all still inadequately explored, might be valuable in improving zinc nutrition. Some therapeutic actions of zinc on diarrhea seem attributable to pharmacologic effects, whereas others are related to the reversal of deficiency (ie, nutritional). The distinction between these 2 mechanisms cannot be clarified given the insensitivity of serum zinc to identify subclinical deficiency states. Why zinc seems to be less effective than expected at all ages, and ineffective for secondary prevention of diarrhea in children <12 mo of age, remains unclear. It was concluded that a reframing of the current recommendation is warranted with consideration of how to better optimize and deliver zinc and whether to provide a complementary public health primary prevention zinc strategy. This requires careful consideration of the zinc product to be used as well as strategies for its delivery. PMID:25240082

Variation in antibiotic prescribing and its impact on recovery in patients with acute cough in primary care: prospective study in 13 countries

PubMed Central

Hood, K; Verheij, T; Little, P; Melbye, H; Nuttall, J; Kelly, M J; Mölstad, S; Godycki-Cwirko, M; Almirall, J; Torres, A; Gillespie, D; Rautakorpi, U; Coenen, S; Goossens, H

2009-01-01

Objective To describe variation in antibiotic prescribing for acute cough in contrasting European settings and the impact on recovery. Design Cross sectional observational study with clinicians from 14 primary care research networks in 13 European countries who recorded symptoms on presentation and management. Patients followed up for 28 days with patient diaries. Setting Primary care. Participants Adults with a new or worsening cough or clinical presentation suggestive of lower respiratory tract infection. Main outcome measures Prescribing of antibiotics by clinicians and total symptom severity scores over time. Results 3402 patients were recruited (clinicians completed a case report form for 99% (3368) of participants and 80% (2714) returned a symptom diary). Mean symptom severity scores at presentation ranged from 19 (scale range 0 to 100) in networks based in Spain and Italy to 38 in the network based in Sweden. Antibiotic prescribing by networks ranged from 20% to nearly 90% (53% overall), with wide variation in classes of antibiotics prescribed. Amoxicillin was overall the most common antibiotic prescribed, but this ranged from 3% of antibiotics prescribed in the Norwegian network to 83% in the English network. While fluoroquinolones were not prescribed at all in three networks, they were prescribed for 18% in the Milan network. After adjustment for clinical presentation and demographics, considerable differences remained in antibiotic prescribing, ranging from Norway (odds ratio 0.18, 95% confidence interval 0.11 to 0.30) to Slovakia (11.2, 6.20 to 20.27) compared with the overall mean (proportion prescribed: 0.53). The rate of recovery was similar for patients who were and were not prescribed antibiotics (coefficient −0.01, P<0.01) once clinical presentation was taken into account. Conclusions Variation in clinical presentation does not explain the considerable variation in antibiotic prescribing for acute cough in Europe. Variation in antibiotic prescribing is not associated with clinically important differences in recovery. Trial registration Clinicaltrials.gov NCT00353951. PMID:19549995

Air cleaning performance of a new environmentally controlled primary crusher operator booth

PubMed Central

Organiscak, J.A.; Cecala, A.B.; Zimmer, J.A.; Holen, B.; Baregi, J.R.

2016-01-01

The National Institute for Occupational Safety and Health (NIOSH) cooperated with 3M Company in the design and testing of a new environmentally controlled primary crusher operator booth at the company’s Wausau granite quarry near Wausau, WI. This quarry had an older crusher booth without a central heating, ventilation and air conditioning (HVAC) system, and without an air filtration and pressurization system. A new replacement operator booth was designed and installed by 3M based on design considerations from past NIOSH research on enclosed cab filtration systems. NIOSH conducted pre-testing of the old booth and post-testing of the new booth to assess the new filtration and pressurization system’s effectiveness in controlling airborne dusts and particulates. The booth’s dust and particulate control effectiveness is described by its protection factor, expressed as a ratio of the outside to inside concentrations measured during testing. Results indicate that the old booth provided negligible airborne respirable dust protection and low particulate protection from the outside environment. The newly installed booth provided average respirable dust protection factors from 2 to 25 over five shifts of dust sampling with occasional worker ingress and egress from the booth, allowing some unfiltered contaminants to enter the enclosure. Shorter-term particle count testing outside and inside the booth under near-steady-state conditions, with no workers entering or exiting the booth, resulted in protection factors from 35 to 127 on 0.3- to 1.0-μm respirable size particulates under various HVAC airflow operating conditions. PMID:26937052

Chemical Stockpile Disposal Program. Emergency Response Concept Plan.

DTIC Science & Technology

1987-07-01

the long term response will likely be managed by...response, the primary management considerations for the secondary response will include emergency medical care, long term health considerations...site, to establish the legal basis for the management structure for the secondary response. 3-4 .~~~~~~~~~L ." ..... .. The long term response to

The devil that we know: lead (Pb) replacement policies under conditions of scientific uncertainty

NASA Technical Reports Server (NTRS)

Ogunseitan, Dele; Schoenung, Julie; Saphores, Jean-Daniel; Shapiro, Andrew; Bhuie, Amrit; Kang, Hai-Yong; Nixon, Hilary; Stein, Antionette

2003-01-01

Engineering and economic considerations are typical driving forces behind the selection of specific chemicals used in the manufacture of consumer products. Only recently has post-consumer environmental impact become part of the major considerations during the initial phases of product design. Therefore, reactive, rather than proactive strategies have dominated the consideration of environmental and health issues in product design.

In vitro culture of various typed meningiomas and characterization of a human malignant meningioma cell line (HKBMM).

PubMed

Ishiwata, Isamu; Ishiwata, Chieko; Ishiwata, Emiko; Sato, Yoshiro; Kiguchi, Kazushige; Tachibana, Toshiaki; Ishikawa, Hiroshi

2004-12-01

We placed on culture the 13 cases of meningiomas, succeeded in making a primary culture of 10 cases and maintained 5 cases in vitro over considerable period of time (over three month), and one cell line derived from a malignant meningioma were established. In the early period of the primary culture, meningioma cells were spindle- or round-shaped cells. In the case of psammomatous type, the cultured cells were characterized as forming psammoma bodies. A cell line designated "HKBMM" was established from a human malignant meningioma occurred from frontal lobe. This line grew well without interruption for 5 years and was subcultivated over 120 times. The cells were spindle and fibrous in shape, and neoplastic and pleomorphic features, and multilayering without contact inhibition. The cells proliferated rapidly, and the population doubling time was about 29 hours. The chromosome number showed a wide distribution of aneuploidy. The mode was in the diploid range. The culture cells were easily transplanted into the subcutis of nude mice and produced the tumor resembling the original tumor.

Human respiratory considerations for civil transport aircraft oxygen system.

DOT National Transportation Integrated Search

1978-01-01

This report is intended to acquaint personnel involved in the design, inspection, and maintenance of civil transport oxygen systems with the human respiratory requirements and oxygen system design considerations necessary to effect an interface and p...

Benefits of Operational Consideration into the Guidance, Navigation, and Control Design of Spacecraft

NASA Technical Reports Server (NTRS)

Morris, Mark C.; Holt, Greg N.

2011-01-01

The following paper points out historical examples where operational consideration into the GN&C design could have helped avoid operational complexity, reduce costs, ensure the ability for a GN&C system to be able to adapt to failures, and in some cases might have helped save mission objectives. A costly repeat of mistakes could befall a program if previous operational lessons, especially from operators of vehicles with similar GN&C systems, are not considered during the GN&C design phase of spacecraft. The information gained from operational consideration during the design can lead to improvements of the design, allow less ground support during operations, and prevent repetition of previous mistakes. However, this benefit can only occur if spacecraft operators adequately capture lessons learned that would improve future designs for operations and those who are designing spacecraft incorporate inputs from those that have previously operated similar GN&C systems.

Primary prevention of cardiovascular diseases: a cost study in family practices.

PubMed

de Bekker-Grob, Esther W; van Dulmen, Sandra; van den Berg, Matthijs; Verheij, Robert A; Slobbe, Laurentius C J

2011-07-06

Considering the scarcity of health care resources and the high costs associated with cardiovascular diseases, we investigated the spending on cardiovascular primary preventive activities and the prescribing behaviour of primary preventive cardiovascular medication (PPCM) in Dutch family practices (FPs). A mixed methods design was used, which consisted of a questionnaire (n = 80 FPs), video recordings of hypertension- or cholesterol-related general practitioner visits (n = 56), and the database of Netherlands Information Network of General Practice (n = 45 FPs; n = 157,137 patients). The questionnaire and video recordings were used to determine the average frequency and time spent on cardiovascular primary preventive activities per FP respectively. Taking into account the annual income and full time equivalents of general practitioners, health care assistants, and practice nurses as well as the practice costs, the total spending on cardiovascular primary preventive activities in Dutch FPs was calculated. The database of Netherlands Information Network of General Practice was used to determine the prescribing behaviour in Dutch FPs by conducting multilevel regression models and adjusting for patient and practice characteristics. Total expenditure on cardiovascular primary preventive activities in FPs in 2009 was €38.8 million (€2.35 per capita), of which 47% was spent on blood pressure measurements, 26% on cardiovascular risk profiling, and 11% on lifestyle counselling. Fifteen percent (€11 per capita) of all cardiovascular medication prescribed in FPs was a PPCM. FPs differed greatly on prescription of PPCM (odds ratio of 3.1). Total costs of cardiovascular primary preventive activities in FPs such as blood pressure measurements and lifestyle counselling are relatively low compared to the costs of PPCM. There is considerable heterogeneity in prescribing behaviour of PPCM between FPs. Further research is needed to determine whether such large differences in prescription rates are justified. Striving for an optimal use of cardiovascular primary preventive activities might lead to similar health outcomes, but may achieve important cost savings.

Cluster randomized trials utilizing primary care electronic health records: methodological issues in design, conduct, and analysis (eCRT Study).

PubMed

Gulliford, Martin C; van Staa, Tjeerd P; McDermott, Lisa; McCann, Gerard; Charlton, Judith; Dregan, Alex

2014-06-11

There is growing interest in conducting clinical and cluster randomized trials through electronic health records. This paper reports on the methodological issues identified during the implementation of two cluster randomized trials using the electronic health records of the Clinical Practice Research Datalink (CPRD). Two trials were completed in primary care: one aimed to reduce inappropriate antibiotic prescribing for acute respiratory infection; the other aimed to increase physician adherence with secondary prevention interventions after first stroke. The paper draws on documentary records and trial datasets to report on the methodological experience with respect to research ethics and research governance approval, general practice recruitment and allocation, sample size calculation and power, intervention implementation, and trial analysis. We obtained research governance approvals from more than 150 primary care organizations in England, Wales, and Scotland. There were 104 CPRD general practices recruited to the antibiotic trial and 106 to the stroke trial, with the target number of practices being recruited within six months. Interventions were installed into practice information systems remotely over the internet. The mean number of participants per practice was 5,588 in the antibiotic trial and 110 in the stroke trial, with the coefficient of variation of practice sizes being 0.53 and 0.56 respectively. Outcome measures showed substantial correlations between the 12 months before, and after intervention, with coefficients ranging from 0.42 for diastolic blood pressure to 0.91 for proportion of consultations with antibiotics prescribed, defining practice and participant eligibility for analysis requires careful consideration. Cluster randomized trials may be performed efficiently in large samples from UK general practices using the electronic health records of a primary care database. The geographical dispersal of trial sites presents a difficulty for research governance approval and intervention implementation. Pretrial data analyses should inform trial design and analysis plans. Current Controlled Trials ISRCTN 47558792 and ISRCTN 35701810 (both registered on 17 March 2010).

Cluster randomized trials utilizing primary care electronic health records: methodological issues in design, conduct, and analysis (eCRT Study)

PubMed Central

2014-01-01

Background There is growing interest in conducting clinical and cluster randomized trials through electronic health records. This paper reports on the methodological issues identified during the implementation of two cluster randomized trials using the electronic health records of the Clinical Practice Research Datalink (CPRD). Methods Two trials were completed in primary care: one aimed to reduce inappropriate antibiotic prescribing for acute respiratory infection; the other aimed to increase physician adherence with secondary prevention interventions after first stroke. The paper draws on documentary records and trial datasets to report on the methodological experience with respect to research ethics and research governance approval, general practice recruitment and allocation, sample size calculation and power, intervention implementation, and trial analysis. Results We obtained research governance approvals from more than 150 primary care organizations in England, Wales, and Scotland. There were 104 CPRD general practices recruited to the antibiotic trial and 106 to the stroke trial, with the target number of practices being recruited within six months. Interventions were installed into practice information systems remotely over the internet. The mean number of participants per practice was 5,588 in the antibiotic trial and 110 in the stroke trial, with the coefficient of variation of practice sizes being 0.53 and 0.56 respectively. Outcome measures showed substantial correlations between the 12 months before, and after intervention, with coefficients ranging from 0.42 for diastolic blood pressure to 0.91 for proportion of consultations with antibiotics prescribed, defining practice and participant eligibility for analysis requires careful consideration. Conclusions Cluster randomized trials may be performed efficiently in large samples from UK general practices using the electronic health records of a primary care database. The geographical dispersal of trial sites presents a difficulty for research governance approval and intervention implementation. Pretrial data analyses should inform trial design and analysis plans. Trial registration Current Controlled Trials ISRCTN 47558792 and ISRCTN 35701810 (both registered on 17 March 2010). PMID:24919485

Point-to-point sub-orbital space tourism: Some initial considerations

NASA Astrophysics Data System (ADS)

Webber, Derek

2010-06-01

Several public statements have been made about the possible, or even likely, extension of initial sub-orbital space tourism operations to encompass point-to-point travel. It is the purpose of this paper to explore some of the basic considerations for such a plan, in order to understand both its merits and its problems. The paper will discuss a range of perspectives, from basic physics to market segmentation, from ground segment logistics to spacecraft design considerations. It is important that these initial considerations are grasped before more detailed planning and design takes place.

77 FR 38838 - Lists of Designated Primary Medical Care, Mental Health, and Dental Health Professional Shortage...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-29

... Designated Primary Medical Care, Mental Health, and Dental Health Professional Shortage Areas AGENCY: Health... facilities designated as primary medical care, mental health, and dental health professional shortage areas... primary care, dental, or mental health services in these HPSAs. NHSC health [[Page 38839

Partially arrested root formation in a permanent maxillary central incisor subsequent to trauma to the primary dentition.

PubMed

Nagatani, S; Mathieu, G P

1994-02-01

When the primary dentition sustains a traumatic insult, the development of the succedaneous teeth can be disturbed leading to a number of malformations. In this case report, the patient presented with a history of prior trauma to his primary maxillary incisors which resulted in partially arrested root formation for a permanent incisor. The considerations in formulating a treatment plan which included orthodontics are discussed.

Primary care ... where?

PubMed

Adcock, G B

1999-07-01

Corporate-based nurse managed centers are not the national norm. More prevalent is the use of an occupational health or physician-directed medical model of care. The author describes how a 14-year-old primary care center at a North Carolina computer software company is just "business as usual" when viewed in the context of the company's philosophy, goals, and culture. Included are considerations for nurse practitioners interested in the successful transplantation of this primary care model to other settings.

Analytical study of beam handling and emittance control

NASA Astrophysics Data System (ADS)

Thompson, James R.; Sloan, M. L.

1993-12-01

The thrust of our research on beam handling and emittance control was to explore how one might design high current electron accelerators, with the preservation of high beam quality designed as the primary design consideration. We considered high current, induction linacs in the parameter class of the ETA/ATA accelerators at LLNL, but with improvements to the accelerator gap design and other features to permit a significant increase in the deliverable beam brightness. Our approach for beam quality control centered on the use of solenoidal magnetic focusing through such induction accelerators, together with gently-shaped (adiabatic) acceleration gaps. This approach offers several tools for the control of beam quality. The strength and axial variation in the solenoidal magnetic field may be designed, as may the length and shape of the acceleration gaps, the loading of the gaps, and the axial spacing from gap to gap. This research showed that each of these design features may individually be optimized to contribute to improved beam quality control, and by exploiting these features, it appears feasible to produce high current, high energy electron beams possessing breakthrough beam quality and brightness. Applications which have been technologically unachievable may for the first time become possible. One such application is the production of high performance free electron lasers at very short wavelengths, extending down to the optical (less than 1 micron) regime.

A Pilot Study of Culturally Adapted Cognitive Behavior Therapy for Hispanics with Major Depression

ERIC Educational Resources Information Center

Interian, Alejandro; Allen, Lesley A.; Gara, Michael A.; Escobar, Javier I.

2008-01-01

The purpose of this study was to evaluate a culturally adapted cognitive-behavioral treatment (CBT) for major depression among Hispanics in primary care. Cultural adaptations were applied based on a range of cultural considerations described in the literature. Fifteen Hispanic primary care patients with major depression were enrolled. All…

The Transition from Primary to Secondary School in Mainstream Education for Children with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Mandy, William; Murin, Marianna; Baykaner, Ozlem; Staunton, Sara; Hellriegel, Josselyn; Anderson, Seonaid; Skuse, David

2016-01-01

The transition from primary to secondary education (hereafter "school transition") is a major ecological shift that poses considerable social, emotional, academic and organisational challenges. It is commonly assumed that this school transition is especially difficult for children with autism spectrum disorder, but that idea is mainly…

Education for Sustainable Development and Global Citizenship: Leadership, Collaboration, and Networking in Primary Schools

ERIC Educational Resources Information Center

Bennell, Sheila J.

2015-01-01

The interaction of leadership, collaboration, and networking in the development of Education for Sustainable Development and Global Citizenship (ESDGC) is examined in five north Wales primary schools noted for their ESDGC development. Strong leadership and considerable, but varying, forms of distributed leadership were found in each of the…

Creative Partnerships? Cultural Policy and Inclusive Arts Practice in One Primary School

ERIC Educational Resources Information Center

Hall, Christine; Thomson, Pat

2007-01-01

This article traces the "cultural turn" in UK educational policy through an analysis of the Creative Partnerships policy (New Labour's "flagship programme in the cultural education field") and a consideration of an arts project funded under this initiative in one primary school. It argues that current educational policy…

"Am I Like a Scientist?": Primary Children's Images of Doing Science in School

ERIC Educational Resources Information Center

Zhai, Junqing; Jocz, Jennifer Ann; Tan, Aik-Ling

2014-01-01

A considerable body of evidence highlights how inquiry-based science can enhance students' epistemic and conceptual understanding of scientific concepts, principles, and theories. However, little is known about how students view themselves as learners of science. In this paper, we explore primary children's images of doing science in school and…

The Neural Basis of Syntactic Deficits in Primary Progressive Aphasia

ERIC Educational Resources Information Center

Wilson, Stephen M.; Galantucci, Sebastiano; Tartaglia, Maria Carmela; Gorno-Tempini, Maria Luisa

2012-01-01

Patients with primary progressive aphasia (PPA) vary considerably in terms of which brain regions are impacted, as well as in the extent to which syntactic processing is impaired. Here we review the literature on the neural basis of syntactic deficits in PPA. Structural and functional imaging studies have most consistently associated syntactic…

Who benefits from CBT for insomnia in primary care? Important patient selection and trial design lessons from longitudinal results of the Lifestyles trial.

PubMed

McCurry, Susan M; Shortreed, Susan M; Von Korff, Michael; Balderson, Benjamin H; Baker, Laura D; Rybarczyk, Bruce D; Vitiello, Michael V

2014-02-01

Evaluate long-term effects of group interventions on sleep and pain outcomes in a primary care population of older adults with osteoarthritis pain and sleep disturbance. Double-blind, cluster-randomized controlled trial with 18-mo follow-up. Group Health and University of Washington, Seattle, WA, from 2009 to 2011. Three hundred sixty-seven adults age 60 y and older, with osteoarthritis pain and insomnia symptoms. Six weekly sessions of group cognitive behavioral therapy for insomnia and pain (CBT-PI), pain alone (CBT-P), and education-only control (EOC) delivered in patients' primary care clinics. There were no significant differences between treatment groups in sleep outcomes at 18 mo. This is a change from published significant 9-mo follow-up results for insomnia severity (Insomnia Severity Index) and sleep efficiency. There were no significant treatment differences in pain at either follow-up. Post hoc analyses of participants with greater insomnia and pain severity at baseline (n = 98) showed significant (P = 0.01) 18-mo reductions in pain comparing CBT-PI versus CBT-P (adjusted mean difference [AMD] = -1.29 [95% confidence interval (CI): -2.24,-0.33]). Moderate, albeit nonsignificant, CBT-PI versus EOC treatment effects for insomnia severity (AMD = -1.43 [95% CI: -4.71, 1.86]) and sleep efficiency (AMD = 2.50 [95% CI: -5.04, 10.05]) were also observed. Possible trial design and methodological considerations that may have affected results are discussed. Results suggest patients with higher levels of comorbid pain and insomnia may be most likely to experience sustained benefit from cognitive behavioral therapy interventions over time, and inclusion of insomnia treatment may yield more clinically meaningful improvements than cognitive behavioral therapy for pain alone. clinicaltrials.gov identifier: NCT01142349.

Evolution of the randomized controlled trial in oncology over three decades.

PubMed

Booth, Christopher M; Cescon, David W; Wang, Lisa; Tannock, Ian F; Krzyzanowska, Monika K

2008-11-20

The randomized controlled trial (RCT) is the gold standard for establishing new therapies in clinical oncology. Here we document changes with time in design, sponsorship, and outcomes of oncology RCTs. Reports of RCTs evaluating systemic therapy for breast, colorectal (CRC), and non-small-cell lung cancer (NSCLC) published 1975 to 2004 in six major journals were reviewed. Two authors abstracted data regarding trial design, results, and conclusions. Conclusions of authors were graded using a 7-point Likert scale. For each study the effect size for the primary end point was converted to a summary measure. A total of 321 eligible RCTs were included (48% breast, 24% CRC, 28% NSCLC). Over time, the number and size of RCTs increased considerably. For-profit/mixed sponsorship increased substantially during the study period (4% to 57%; P < .001). There was increasing use of time-to-event measures (39% to 78%) and decreasing use of response rate (54% to 14%) as primary end point (P < .001). Effect size remained stable over the study period. Authors have become more likely to strongly endorse the experimental arm (P = .017). A significant P value for the primary end point and industry sponsorship were each independently associated with endorsement of the experimental agent (odds ratio [OR] = 19.6, 95% CI, 8.9 to 43.1, and OR = 3.5, 95% CI, 1.6 to 7.5, respectively). RCTs in oncology have become larger and are more likely to be sponsored by industry. Authors of modern RCTs are more likely to strongly endorse novel therapies. For-profit sponsorship and statistically significant results are independently associated with endorsement of the experimental arm.

Working under a clinic-level quality incentive: primary care clinicians' perceptions.

PubMed

Greene, Jessica; Kurtzman, Ellen T; Hibbard, Judith H; Overton, Valerie

2015-01-01

A key consideration in designing pay-for-performance programs is determining what entity the incentive should be awarded to-individual clinicians or to groups of clinicians working in teams. Some argue that team-level incentives, in which clinicians who are part of a team receive the same incentive based on the team's performance, are most effective; others argue for the efficacy of clinician-level incentives. This study examines primary care clinicians' perceptions of a team-based quality incentive awarded at the clinic level. This research was conducted with Fairview Health Services, where 40% of the primary care compensation model was based on clinic-level quality performance. We conducted 48 in-depth interviews to explore clinicians' perceptions of the clinic-level incentive, as well as an online survey of 150 clinicians (response rate 56%) to investigate which entity the clinicians would consider optimal to target for quality incentives. Clinicians reported the strengths of the clinic-based quality incentive were quality improvement for the team and less patient "dumping," or shifting patients with poor outcomes to other clinicians. The weaknesses were clinicians' lack of control and colleagues riding the coattails of higher performers. There were mixed reports on the model's impact on team dynamics. Although clinicians reported greater interaction with colleagues, some described an increase in tension. Most clinicians surveyed (73%) believed that there should be a mix of clinic and individual-level incentives to maintain collaboration and recognize individual performance. The study highlights the important advantages and disadvantages of using incentives based upon clinic-level performance. Future research should test whether hybrid incentives that mix group and individual incentives can maintain some of the best elements of each design while mitigating the negative impacts. © 2015 Annals of Family Medicine, Inc.

Creating Library Interiors: Planning and Design Considerations.

ERIC Educational Resources Information Center

Jones, Plummer Alston, Jr.; Barton, Phillip K.

1997-01-01

Examines design considerations for public library interiors: access; acoustical treatment; assignable and nonassignable space; building interiors: ceilings, clocks, color, control, drinking fountains; exhibit space: slotwall display, floor coverings, floor loading, furniture, lighting, mechanical systems, public address, copying machines,…

Optimization of helicopter airframe structures for vibration reduction considerations, formulations and applications

NASA Technical Reports Server (NTRS)

Murthy, T. Sreekanta

1988-01-01

Several key issues involved in the application of formal optimization technique to helicopter airframe structures for vibration reduction are addressed. Considerations which are important in the optimization of real airframe structures are discussed. Considerations necessary to establish relevant set of design variables, constraints and objectives which are appropriate to conceptual, preliminary, detailed design, ground and flight test phases of airframe design are discussed. A methodology is suggested for optimization of airframes in various phases of design. Optimization formulations that are unique to helicopter airframes are described and expressions for vibration related functions are derived. Using a recently developed computer code, the optimization of a Bell AH-1G helicopter airframe is demonstrated.

Orion Absolute Navigation System Progress and Challenge

NASA Technical Reports Server (NTRS)

Holt, Greg N.; D'Souza, Christopher

2012-01-01

The absolute navigation design of NASA's Orion vehicle is described. It has undergone several iterations and modifications since its inception, and continues as a work-in-progress. This paper seeks to benchmark the current state of the design and some of the rationale and analysis behind it. There are specific challenges to address when preparing a timely and effective design for the Exploration Flight Test (EFT-1), while still looking ahead and providing software extensibility for future exploration missions. The primary onboard measurements in a Near-Earth or Mid-Earth environment consist of GPS pseudo-range and delta-range, but for future explorations missions the use of star-tracker and optical navigation sources need to be considered. Discussions are presented for state size and composition, processing techniques, and consider states. A presentation is given for the processing technique using the computationally stable and robust UDU formulation with an Agee-Turner Rank-One update. This allows for computational savings when dealing with many parameters which are modeled as slowly varying Gauss-Markov processes. Preliminary analysis shows up to a 50% reduction in computation versus a more traditional formulation. Several state elements are discussed and evaluated, including position, velocity, attitude, clock bias/drift, and GPS measurement biases in addition to bias, scale factor, misalignment, and non-orthogonalities of the accelerometers and gyroscopes. Another consideration is the initialization of the EKF in various scenarios. Scenarios such as single-event upset, ground command, and cold start are discussed as are strategies for whole and partial state updates as well as covariance considerations. Strategies are given for dealing with latent measurements and high-rate propagation using multi-rate architecture. The details of the rate groups and the data ow between the elements is discussed and evaluated.

Space bioreactor: Design/process flow

NASA Technical Reports Server (NTRS)

Cross, John H.

1987-01-01

The design of the space bioreactor stems from three considerations. First, and foremost, it must sustain cells in microgravity. Closely related is the ability to take advantage of the weightlessness and microgravity. Lastly, it should fit into a bioprocess. The design of the space bioreactor is described in view of these considerations. A flow chart of the bioreactor is presented and discussed.

Design Development Analyses in Support of a Heatpipe-Brayton Cycle Heat Exchanger

NASA Technical Reports Server (NTRS)

Steeve, Brian E.; Kapernick, Richard J.

2004-01-01

One of the power systems under consideration for nuclear electric propulsion or as a planetary surface power source is a heatpipe-cooled reactor coupled to a Brayton cycle. In this system, power is transferred from the heatpipes to the Brayton gas via a heat exchanger attached to the heatpipes. This paper discusses the fluid, thermal and structural analyses that were performed in support of the design of the heat exchanger to be tested in the SAFE-100 experimental program at the Marshall Space Flight Center: An important consideration throughout the design development of the heat exchanger w its capability to be utilized for higher power and temperature applications. This paper also discusses this aspect of the design and presents designs for specific applications that are under consideration.

Program to Optimize Simulated Trajectories II (POST2) Surrogate Models for Mars Ascent Vehicle (MAV) Performance Assessment

NASA Technical Reports Server (NTRS)

Zwack, M. R.; Dees, P. D.; Thomas, H. D.; Polsgrove, T. P.; Holt, J. B.

2017-01-01

The primary purpose of the multiPOST tool is to enable the execution of much larger sets of vehicle cases to allow for broader trade space exploration. However, this exploration is not achieved solely with the increased case throughput. The multiPOST tool is applied to carry out a Design of Experiments (DOE), which is a set of cases that have been structured to capture a maximum amount of information about the design space with minimal computational effort. The results of the DOE are then used to fit a surrogate model, ultimately enabling parametric design space exploration. The approach used for the MAV study includes both DOE and surrogate modeling. First, the primary design considerations for the vehicle were used to develop the variables and ranges for the multiPOST DOE. The final set of DOE variables were carefully selected in order to capture the desired vehicle trades and take into account any special considerations for surrogate modeling. Next, the DOE sets were executed through multiPOST. Following successful completion of the DOE cases, a manual verification trial was performed. The trial involved randomly selecting cases from the DOE set and running them by hand. The results from the human analyst's run and multiPOST were then compared to ensure that the automated runs were being executed properly. Completion of the verification trials was then followed by surrogate model fitting. After fits to the multiPOST data were successfully created, the surrogate models were used as a stand-in for POST2 to carry out the desired MAV trades. Using the surrogate models in lieu of POST2 allowed for visualization of vehicle sensitivities to the input variables as well as rapid evaluation of vehicle performance. Although the models introduce some error into the output of the trade study, they were very effective at identifying areas of interest within the trade space for further refinement by human analysts. The next section will cover all of the ground rules and assumptions associated with DOE setup and multiPOST execution. Section 3.1 gives the final DOE variables and ranges, while section 3.2 addresses the POST2 specific assumptions. The results of the verification trials are given in section 4. Section 5 gives the surrogate model fitting results, including the goodness-of-fit metrics for each fit. Finally, the MAV specific results are discussed in section 6.

Restoring hydrological and biogeochemical ecosystem services in streams: how can science inform practice?

NASA Astrophysics Data System (ADS)

Lautz, L.; Gordon, R.; Daniluk, T.; Zimmer, M. A.; Endreny, T. A.; McGrath, K.

2014-12-01

Society is increasingly recognizing the value of stream ecosystem functions, as evidenced by the enormous economic investment being made in stream restoration across the United States. Stream restoration projects have a variety of goals, including improvement in water quality and in-stream habitat. Popular approaches to restoration (such as Natural Channel Design, or NCD) aim to move degraded streams along a trajectory toward a dynamic ecological endpoint that represents natural conditions. Project designs primarily focus on channel form and function, but stream-groundwater exchanges of water and solutes are not typically a design consideration, although a primary component of fully functioning stream ecosystems. Here, we synthesize results from field investigations of the impact of NCD stream restoration on stream-groundwater exchanges by (1) comparing restored sites to reference reaches, which serve as the basis for the restoration design, (2) characterizing multiple restored sites to determine universal characteristics of streams restored by NCD, and (3) monitoring a stream pre- and post- restoration. NCD restoration creates hot spots of rapid hyporheic exchange upstream of channel spanning structures, with water fluxes across the bed interface up to an order of magnitude higher than at pre-restoration or reference reaches. Elevated flux rates result in short hyporheic residence times, which are not sufficiently long to generate net changes in nutrient concentrations. Hot spots of biogeochemical transformations are instead located around secondary bedforms, such as pool-riffle sequences, where gross water exchange rates are more moderate. Reference reaches show greater evidence of groundwater discharge to the hyporheic zone relative to restored reaches, although observations before and after restoration suggest NCD can modify the spatial extent of groundwater discharge zones. Gross water exchange across the streambed interface along restored reaches is a small percentage of stream discharge, suggesting the primary impact of restoration on stream-groundwater exchange is promoting biochemical heterogeneity in the subsurface, rather than longitudinal net changes in stream solute concentrations. Results inform future design to achieve restoration goals.

Design and Management of an IMC Micro Center.

ERIC Educational Resources Information Center

Bunson, Stanley N.

1988-01-01

Outlines design and management factors to be considered when developing a microcomputer lab for an instructional media center (IMC). Highlights include environmental considerations, including spatial arrangements, furniture, power requirements, temperature control, and lighting; software and hardware acquisition; and administrative considerations,…

Ergonomics: The Forgotten Variable.

ERIC Educational Resources Information Center

Fitterman, L. Jeffrey

This paper describes ergonomics and the need to adapt worksites and technologies for individuals with physical or sensory disabilities. It provides suggestions for how to design an appropriate setup, design considerations, environmental considerations, chairs, monitor height, ambient noise, light, and electricity. Recommendations include: (1)…

78 FR 28896 - Design Limits and Loading Combinations for Metal Primary Reactor Containment System Components

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-16

... NUCLEAR REGULATORY COMMISSION [NRC-2013-0095] Design Limits and Loading Combinations for Metal... Regulatory Guide (RG) 1.57, ``Design Limits and Loading Combinations for Metal Primary Reactor Containment... the NRC staff considers acceptable for design limits and loading combinations for metal primary...

SoTL in the LIS Classroom: Helping Future Academic Librarians Become More Engaged Teachers

ERIC Educational Resources Information Center

McNiff, Lindsay; Hays, Lauren

2017-01-01

In this paper, we share background and key considerations of the Scholarship of Teaching and Learning (SoTL), and propose introducing library and information science (LIS) students to SoTL as a way to acquaint them with the higher education teaching profession. Throughout the article, we employ reflection as the primary consideration and support…

Non-Cooled Power System for Venus Lander

NASA Technical Reports Server (NTRS)

Salazar, Denise; Landis, Geoffrey A.; Colozza, Anthony J.

2014-01-01

The Planetary Science Decadal Survey of 2013-2022 stated that the exploration of Venus is of significant interest. Studying the seismic activity of the planet is of particular importance because the findings can be compared to the seismic activity of Earth. Further, the geological and atmospheric properties of Venus will shed light into the past and future of Earth. This paper presents a radioisotope power system (RPS) design for a small low-power Venus lander. The feasibility of the new power system is then compared to that of primary batteries. A requirement for the power source system is to avoid moving parts in order to not interfere with the primary objective of the mission - to collect data about the seismic activity of Venus using a seismometer. The target mission duration of the lander is 117 days, a significant leap from Venera 13, the longest-lived lander on the surface of Venus, which survived for 2 hours. One major assumption for this mission design is that the power source system will not provide cooling to the other components of the lander. This assumption is based on high-temperature electronics technology that will enable the electronics and components of the lander to operate at Venus surface temperature. For the proposed RPS, a customized General Purpose Heat Source Radioisotope Thermoelectric Generator (GPHSRTG) is designed and analyzed. The GPHS-RTG is chosen primarily because it has no moving parts and it is capable of operating for long duration missions on the order of years. This power system is modeled as a spherical structure for a fundamental thermal analysis. The total mass and electrical output of the system are calculated to be 24 kilograms and 26 Watts, respectively. An alternative design for a battery-based power system uses Sodium Sulfur batteries. To deliver a similar electrical output for 117 days, the battery mass is calculated to be 234 kilograms. Reducing mission duration or power required will reduce the required battery mass. Finally, the advantages and disadvantages of both power systems with regard to science return, risk, and cost are briefly compared. The design of the radioisotope power system is considerably riskier because it is novel and would require additional years of further refinement, manufacturing, safety analysis, and testing that the primary batteries do not need. However, the lifetime of the radioisotope power system makes its science return more promising.

Residential design for real life rehabilitation.

PubMed

Kiser, Laura; Zasler, Nathan

2009-01-01

This article provides readers with a review of the major considerations for designing living environments for persons with neurodisability due to acquired brain injury (ABI). Components that need to be considered in order to assure that the environment is designed with a functional perspective in mind are explored. The issues to be considered herein include the influences of cognition and visual and visuoperceptual, motor, behavioral, and sensory impairment on residential design considerations. Resources for individuals involved in residential design for this special population are also provided to facilitate design decisions and implementation.

Orion Absolute Navigation System Progress and Challenges

NASA Technical Reports Server (NTRS)

Holt, Greg N.; D'Souza, Christopher

2011-01-01

The Orion spacecraft is being designed as NASA's next-generation exploration vehicle for crewed missions beyond Low-Earth Orbit. The navigation system for the Orion spacecraft is being designed in a Multi-Organizational Design Environment (MODE) team including contractor and NASA personnel. The system uses an Extended Kalman Filter to process measurements and determine the state. The design of the navigation system has undergone several iterations and modifications since its inception, and continues as a work-in-progress. This paper seeks to benchmark the current state of the design and some of the rationale and analysis behind it. There are specific challenges to address when preparing a timely and effective design for the Exploration Flight Test (EFT-1), while still looking ahead and providing software extensibility for future exploration missions. The primary measurements in a Near-Earth or Mid-Earth environment consist of GPS pseudorange and deltarange, but for future explorations missions the use of star-tracker and optical navigation sources need to be considered. Discussions are presented for state size and composition, processing techniques, and consider states. A presentation is given for the processing technique using the computationally stable and robust UDU formulation with an Agee-Turner Rank-One update. This allows for computational savings when dealing with many parameters which are modeled as slowly varying Gauss-Markov processes. Preliminary analysis shows up to a 50% reduction in computation versus a more traditional formulation. Several state elements are discussed and evaluated, including position, velocity, attitude, clock bias/drift, and GPS measurement biases in addition to bias, scale factor, misalignment, and non-orthogonalities of the accelerometers and gyroscopes. Another consideration is the initialization of the EKF in various scenarios. Scenarios such as single-event upset, ground command, pad alignment, cold start are discussed as are strategies for whole and partial state updates as well as covariance considerations. Strategies are given for dealing with latent measurements and high-rate propagation using multi-rate architecture. The details of the rate groups and the data ow between the elements is discussed and evaluated.

An integrated optimum design approach for high speed prop-rotors including acoustic constraints

NASA Technical Reports Server (NTRS)

Chattopadhyay, Aditi; Wells, Valana; Mccarthy, Thomas; Han, Arris

1993-01-01

The objective of this research is to develop optimization procedures to provide design trends in high speed prop-rotors. The necessary disciplinary couplings are all considered within a closed loop multilevel decomposition optimization process. The procedures involve the consideration of blade-aeroelastic aerodynamic performance, structural-dynamic design requirements, and acoustics. Further, since the design involves consideration of several different objective functions, multiobjective function formulation techniques are developed.

Modeling and control of beam-like structures

NASA Technical Reports Server (NTRS)

Hu, A.; Skelton, R. E.; Yang, T. Y.

1987-01-01

The most popular finite element codes are based upon appealing theories of convergence of modal frequencies. For example, the popularity of cubic elements for beam-like structures is due to the rapid convergence of modal frequencies and stiffness properties. However, for those problems in which the primary consideration is the accuracy of response of the structure at specified locations it is more important to obtain accuracy in the modal costs than in the modal frequencies. The modal cost represents the contribution of a mode in the norm of the response vector. This paper provides a complete modal cost analysis for beam-like continua. Upper bounds are developed for mode truncation errors in the model reduction process and modal cost analysis dictates which modes to retain in order to reduce the model for control design purposes.

Evaluation of an Atmosphere Revitalization Subsystem for Deep Space Exploration Missions

NASA Technical Reports Server (NTRS)

Perry, Jay L.; Abney, Morgan B.; Conrad, Ruth E.; Frederick, Kenneth R.; Greenwood, Zachary W.; Kayatin, Matthew J.; Knox, James C.; Newton, Robert L.; Parrish, Keith J.; Takada, Kevin C.;

Financing biotechnology projects: lender due diligence requirements and the role of independent technical consultants.

PubMed

Keller, J B; Plath, P B

1999-01-01

An increasing number of biotechnology projects are being brought to commercialization using conventional structured finance sources, which have traditionally only been available to proven technologies and primary industries. Attracting and securing competitive cost financing from mainstream lenders, however, will require the sponsor of a new technology or process to undergo a greater level of due diligence. The specific areas and intensity of investigation, which are typically required by lenders in order to secure long-term financing for biotechnology-based manufacturing systems, is reviewed. The processes for evaluating the adequacy of prior laboratory testing and pilot plant demonstrations is discussed. Particular emphasis is given to scale-up considerations and the ability of the proposed facility design to accommodate significant modifications, in the event that scale-up problems are encountered.

How do the Polytechnic Students Cope with the Difficulties in Composing Abstracts for Their Final Projects?

NASA Astrophysics Data System (ADS)

Niswatin, C.; Latief, M. A.; Suharyadi, S.

2018-02-01

This research aims to uncover the fact about engineering students in dealing with composing abstracts for their final projects. The research applies a descriptive qualitative quantitative design. The data were collected through questioners involving 104 engineering students, including the alumni at Politeknik Kota Malang, Indonesia. Furthermore, interviews were carried out to explain the details where necessary to support the primary data. It is found that the common problems faced by engineering students include 1) combining words into sentences, 2) identifying the most appropriate technical terms in engineering, and 3) applying grammar in context. To cope with those difficulties they demanded translation application machines, supported by peer-proofreaders. In addition, they considerably engaged personal tutoring with the lectures more than three times.

M Dwarf Exoplanet Survey by the Falcon Telescope Network

NASA Astrophysics Data System (ADS)

Carlson, Randall E.

2016-10-01

The Falcon Telescope Network (FTN) consists of twelve automated 20-inch telescopes located around the globe. We control it at the US Air Force Academy in Colorado Springs, Colorado from the Cadet Space Operations Center. We have installed 10 of the 12 sites and anticipate full operational capability by the beginning of 2017. The network's worldwide geographic distribution provides advantages. The primary mission of the FTN is Space Situational Awareness and studying Near Earth Objects. However, we are employing the FTN with its 11' x 11' field-of-view for a five-year, M dwarf exoplanet survey. Specifically, we are searching for Earth-radius exoplanets. We describe the FTN, design considerations going into the FTN's M dwarf exoplanet survey including automated operations, and initial results of the survey.

A survey of gas-side fouling in industrial heat-transfer equipment

NASA Astrophysics Data System (ADS)

Marner, W. J.; Suitor, J. W.

1983-11-01

Gas-side fouling and corrosion problems occur in all of the energy intensive industries including the chemical, petroleum, primary metals, pulp and paper, glass, cement, foodstuffs, and textile industries. Topics of major interest include: (1) heat exchanger design procedures for gas-side fouling service; (2) gas-side fouling factors which are presently available; (3) startup and shutdown procedures used to minimize the effects of gas-side fouling; (4) gas-side fouling prevention, mitigation, and accommodation techniques; (5) economic impact of gas-side fouling on capital costs, maintenance costs, loss of production, and energy losses; and (6) miscellaneous considerations related to gas-side fouling. The present state-of-the-art for industrial gas-side fouling is summarized by a list of recommendations for further work in this area.

A survey of gas-side fouling in industrial heat-transfer equipment

NASA Technical Reports Server (NTRS)

Marner, W. J.; Suitor, J. W.

1983-01-01

Gas-side fouling and corrosion problems occur in all of the energy intensive industries including the chemical, petroleum, primary metals, pulp and paper, glass, cement, foodstuffs, and textile industries. Topics of major interest include: (1) heat exchanger design procedures for gas-side fouling service; (2) gas-side fouling factors which are presently available; (3) startup and shutdown procedures used to minimize the effects of gas-side fouling; (4) gas-side fouling prevention, mitigation, and accommodation techniques; (5) economic impact of gas-side fouling on capital costs, maintenance costs, loss of production, and energy losses; and (6) miscellaneous considerations related to gas-side fouling. The present state-of-the-art for industrial gas-side fouling is summarized by a list of recommendations for further work in this area.

Rare Presentations of Primary Melanoma and Special Populations: A Systematic Review

PubMed Central

Kottschade, Lisa A.; Grotz, Travis E.; Dronca, Roxana S.; Salomao, Diva R.; Pulido, Jose S.; Wasif, Nabil; Jakub, James W.; Bagaria, Sanjay P.; Kumar, Riten; Kaur, Judith S.; Morita, Shane Y.; Moran, Steven L.; Nguyen, Jesse T.; Nguyen, Emily C.; Hand, Jennifer L.; Erickson, Lori A.; Brewer, Jerry D.; Baum, Christian L.; Miller, Robert C.; Swanson, David L.; Lowe, Val; Markovic, Svetomir N.

2013-01-01

A subset of patients with melanoma present in rare and unique clinical circumstances requiring specific considerations with respect to diagnostic and therapeutic interventions. Herein we present our review of patients with: (1) primary mucosal melanoma of the head and neck, gastrointestinal and genitourinary tracts; (2) primary melanoma of the eye; (3) desmoplastic melanoma; (4) subungual melanoma; (5) melanoma in special populations: children, non-Caucasians, as well as a discussion of familial melanoma. PMID:23563206

Correlation between patients' reasons for encounters/health problems and population density in Japan: a systematic review of observational studies coded by the International Classification of Health Problems in Primary Care (ICHPPC) and the International Classification of Primary care (ICPC).

PubMed

Kaneko, Makoto; Ohta, Ryuichi; Nago, Naoki; Fukushi, Motoharu; Matsushima, Masato

2017-09-13

The Japanese health care system has yet to establish structured training for primary care physicians; therefore, physicians who received an internal medicine based training program continue to play a principal role in the primary care setting. To promote the development of a more efficient primary health care system, the assessment of its current status in regard to the spectrum of patients' reasons for encounters (RFEs) and health problems is an important step. Recognizing the proportions of patients' RFEs and health problems, which are not generally covered by an internist, can provide valuable information to promote the development of a primary care physician-centered system. We conducted a systematic review in which we searched six databases (PubMed, the Cochrane Library, Google Scholar, Ichushi-Web, JDreamIII and CiNii) for observational studies in Japan coded by International Classification of Health Problems in Primary Care (ICHPPC) and International Classification of Primary Care (ICPC) up to March 2015. We employed population density as index of accessibility. We calculated Spearman's rank correlation coefficient to examine the correlation between the proportion of "non-internal medicine-related" RFEs and health problems in each study area in consideration of the population density. We found 17 studies with diverse designs and settings. Among these studies, "non-internal medicine-related" RFEs, which was not thought to be covered by internists, ranged from about 4% to 40%. In addition, "non-internal medicine-related" health problems ranged from about 10% to 40%. However, no significant correlation was found between population density and the proportion of "non-internal medicine-related" RFEs and health problems. This is the first systematic review on RFEs and health problems coded by ICHPPC and ICPC undertaken to reveal the diversity of health problems in Japanese primary care. These results suggest that primary care physicians in some rural areas of Japan need to be able to deal with "non-internal-medicine-related" RFEs and health problems, and that curriculum including practical non-internal medicine-related training is likely to be important.

Waiting list randomized controlled trial within a case-finding design: methodological considerations.

PubMed

Ronaldson, Sarah; Adamson, Joy; Dyson, Lisa; Torgerson, David

2014-10-01

Randomized controlled trials (RCTs) are widely used in health care research to provide high-quality evidence of effectiveness of an intervention. However, sometimes a study does not require an RCT in order to answer its primary objective; a case-finding design may be more appropriate. The aim of this paper was to introduce a new study design that nests a waiting list RCT within a case-finding study. An example of the new study design is the DOC Study, which primarily aims to determine the diagnostic accuracy of lung function tests for chronic obstructive pulmonary disease. It also investigates the impact of lung function tests on smoking behaviour through use of a waiting list design. The first step of the study design is to obtain participants' consent. Individuals are then randomized to one of two groups; either the 'intervention now' group or the 'intervention later' group, that is, participants are placed on a waiting list. All participants receive the same intervention; the only difference between the groups is the timing of the intervention. The design addresses patient preference issues and recruitment issues that can arise in other trial designs. Potential limitations include differential attrition between study groups and potential demoralization for the 'intervention later' group. The 'waiting list case-finding trial' design is a valuable method that could be applied to case-finding studies; the design enables the case-finding component of a study to be maintained while simultaneously exploring additional hypotheses through conducting a trial. © 2014 John Wiley & Sons, Ltd.

Clinical managers in the primary care sector: do the benefits stack up?

PubMed

O'Riordan, Chris; McDermott, Aoife

2012-01-01

The purpose of this paper is to explore the nature and value of the clinical management role undertaken by primary care doctors in Ireland. To date, a majority of research has focused on clinical management roles in the acute sector. The paper presents a sub-set of data from a mixed methods study. In total, 14 semi-structured interviews are drawn upon to identify the nature and value of the clinical management role in primary care. Comparison with acute sector research identifies considerable differences in the nature of the clinical management role across sectors--and in the associated value proposition. Structural and role-related contingencies affecting the potential value of clinical management roles in Irish primary care are discussed. Structural influences include the private ownership structure, low complexity and limited requirement for cross-professional coordination. Role-related influences include the primacy of the clinical identity, time constraints and lack of managerial training. The findings provide a limited basis for generalisation, premised on 14 interviews in one national context. However, given the international shift towards the provision of health services in primary care, they provide a research agenda for an important healthcare context. The findings draw attention to the need for policy consideration of the value of the clinical manager role in primary care; how policy can support effective primary care management; and the need for specialised management training, which takes account of the small-firm context. The paper identifies that primary-care clinical-management roles focus on operational management and oversight and discusses the structural and role-related factors which affect their efficacy.

Hemorrhoids.

PubMed

Hussain, J N

1999-03-01

Hemorrhoids are one of the most frequent anorectal disorders encountered in the primary care setting. They are the most common cause of hematochezia, and are responsible for considerable patient suffering and disability. With the techniques of diagnosis and office-based interventions described in this article, the primary care provider can effectively relieve most patients' symptoms and ensure that more significant bowel disease is not overlooked.

Who Has Rights to What? Inclusion in Australian Early Childhood Programs

ERIC Educational Resources Information Center

Petriwskyj, Anne

2010-01-01

In early childhood settings prior to school and in the early years of primary school, debate continues over the meaning of inclusion and its scope in terms of the groups under consideration. The genealogies of early childhood education and care, early primary school, special education and cultural education were examined to identify recurring and…

Transformer Impedance Reflection Demonstration

ERIC Educational Resources Information Center

Layton, William

2014-01-01

Questions often arise as to how a device attached to a transformer can draw power from the electrical power grid since it seems that the primary and secondary are not connected to one another. However, a closer look at how the primary and secondary are linked together magnetically and a consideration of the role of Lenz's law in this linkage…

2 CFR 180.440 - What action may I take if a primary tier participant knowingly does business with an excluded or...

Code of Federal Regulations, 2010 CFR

2010-01-01

...) Responsibilities of Federal Agency Officials Regarding Transactions § 180.440 What action may I take if a primary... the matter for suspension and debarment consideration. You may also disallow costs, annul or terminate the transaction, issue a stop work order, or take any other appropriate remedy. ...

The Pedagogical Potential of Drawing and Writing in a Primary Science Multimodal Unit

ERIC Educational Resources Information Center

Wilson, Rachel E.; Bradbury, Leslie U.

2016-01-01

In consideration of the potential of drawing and writing as assessment and learning tools, we explored how early primary students used these modes to communicate their science understandings. The context for this study was a curricular unit that incorporated multiple modes of representation in both the presentation of information and production of…

Literacy in a 'Broad and Balanced' Primary School Curriculum: The Potential of a Disciplinary Approach in Irish Classrooms

ERIC Educational Resources Information Center

Burke, Patrick; Welsch, Jodi G.

2018-01-01

The prominence afforded to literacy in the Irish Primary School Curriculum has received considerable attention in recent years, spurred by Programme for International Student Assessment (PISA) rankings, governmental priorities, public commentary and academic debate. At times, this discourse has presented literacy as a separate and distinct entity…

Sex, Grade-Level and Stream Differences in Learning Environment and Attitudes to Science in Singapore Primary Schools

ERIC Educational Resources Information Center

Peer, Jarina; Fraser, Barry J.

2015-01-01

Learning environment research provides a well-established approach for describing and understanding what goes on in classrooms and has attracted considerable interest in Singapore. This article reports the first study of science classroom environments in Singapore primary schools. Ten scales from the What Is Happening In this Class?,…

International Primary Science: What's in It for Us?

ERIC Educational Resources Information Center

Dunne, Mick; Maklad, Rania

2013-01-01

It is all too common, given the considerable day-to-day challenges facing those involved in education, to focus on the here and now rather than look further afield. The authors of this article have been fortunate enough to see "primary science" in a wide range of international settings, from Nigeria to Chile, North America and Canada,…

Home Language and Language Proficiency; A Large-Scale Longitudinal Study in Dutch Primary Schools.

ERIC Educational Resources Information Center

Driessen, Geert; van der Slik, Frans; De Bot, Kees

2002-01-01

Reports on a large-scale longitudinal study into the development of language proficiency of Dutch primary school children aged 7-10. Data on language proficiency and a range of background variables were analyzed. Results suggest that while immigrant children develop their language skill in Dutch considerably over 2 years, they are nonetheless…

Development of a Mobile-Optimised Website to Support Students with Special Needs Transitioning from Primary to Secondary Settings

ERIC Educational Resources Information Center

Chambers, Dianne; Coffey, Anne

2013-01-01

With an increasing number of students with special needs being included in regular classroom environments, consideration of, and planning for, a smooth transition between different school settings is important for parents, classroom teachers and school administrators. The transition between primary and secondary school can be difficult for…

Changing Workloads of Primary School Teachers: "I Seem to Live on the Edge of Chaos"

ERIC Educational Resources Information Center

Bridges, Sue; Searle, Annette

2011-01-01

The roles and workloads of teachers have been widely noted as changing considerably over recent decades. In this 2009 replication of a 1992 study, 379 New Zealand primary school educators are surveyed regarding their workloads, how these changed and their perceived sustainability. It investigates how respondents believe that educational reforms…

Evaluation and treatment of male hypogonadism in primary care.

PubMed

Pickett, Kim Anne

2016-08-18

Male hypogonadism is increasing in prevalence, particularly in the older male population. Signs and symptoms associated with hypogonadism are often nonspecific and may be difficult to categorize. This article discusses parameters for screening patients at risk, reviews how to establish the diagnosis of primary or secondary male hypogonadism, and offers important considerations for treatment of patients with hypogonadism.

The Athletic Shoe in Football

PubMed Central

Jastifer, James; Kent, Richard; Crandall, Jeff; Sherwood, Chris; Lessley, David; McCullough, Kirk A.; Coughlin, Michael J.; Anderson, Robert B.

2017-01-01

Background: Foot and ankle injuries are common in sports, particularly in cleated athletes. Traditionally, the athletic shoe has not been regarded as a piece of protective equipment but rather as a part of the uniform, with a primary focus on performance and subjective feedback measures of comfort. Changes in turf and shoe design have poorly understood implications on the health and safety of players. Evidence Acquisition: A literature search of the MEDLINE and PubMed databases was conducted. Keywords included athletic shoewear, cleated shoe, football shoes, and shoewear, and search parameters were between the years 2000 and 2016. Study Design: Clinical review. Level of Evidence: Level 5. Results: The athletic shoe is an important piece of protective sports equipment. There are several important structural considerations of shoe design, including biomechanical compliance, cleat and turf interaction, and shoe sizing/fit, that affect the way an athlete engages with the playing surface and carry important potential implications regarding player safety if not understood and addressed. Conclusion: Athletic footwear should be considered an integral piece of protective equipment rather than simply an extension of the uniform apparel. More research is needed to define optimal shoe sizing, the effect that design has on mechanical load, and how cleat properties, including pattern and structure, interact with the variety of playing surfaces. PMID:28151702

Acoustic Source Localization via Time Difference of Arrival Estimation for Distributed Sensor Networks Using Tera-Scale Optical Core Devices

DOE PAGES

Imam, Neena; Barhen, Jacob

2009-01-01

For real-time acoustic source localization applications, one of the primary challenges is the considerable growth in computational complexity associated with the emergence of ever larger, active or passive, distributed sensor networks. These sensors rely heavily on battery-operated system components to achieve highly functional automation in signal and information processing. In order to keep communication requirements minimal, it is desirable to perform as much processing on the receiver platforms as possible. However, the complexity of the calculations needed to achieve accurate source localization increases dramatically with the size of sensor arrays, resulting in substantial growth of computational requirements that cannot bemore » readily met with standard hardware. One option to meet this challenge builds upon the emergence of digital optical-core devices. The objective of this work was to explore the implementation of key building block algorithms used in underwater source localization on the optical-core digital processing platform recently introduced by Lenslet Inc. This demonstration of considerably faster signal processing capability should be of substantial significance to the design and innovation of future generations of distributed sensor networks.« less

The patient-centered medical home: an ethical analysis of principles and practice.

PubMed

Braddock, Clarence H; Snyder, Lois; Neubauer, Richard L; Fischer, Gary S

2013-01-01

The patient-centered medical home (PCMH), with its focus on patient-centered care, holds promise as a way to reinvigorate the primary care of patients and as a necessary component of health care reform. While its tenets have been the subject of review, the ethical dimensions of the PCMH have not been fully explored. Consideration of the ethical foundations for the core principles of the PCMH can and should be part of the debate concerning its merits. The PCMH can align with the principles of medical ethics and potentially strengthen the patient-physician relationship and aspects of health care that patients value. Patient choice and these ethical considerations are central and at least as important as the economic and practical arguments in support of the PCMH, if not more so. Further, the ethical principles that support key concepts of the PCMH have implications for the design and implementation of the PCMH. This paper explores the PCMH in light of core principles of ethics and professionalism, with an emphasis both on how the concept of the PCMH may reinforce core ethical principles of medical practice and on further implications of these principles.

The effects of biomass burning on the concentration of trace gases in the atmosphere

NASA Technical Reports Server (NTRS)

Donaldson, Leon M.

1988-01-01

Over the past several years, there has been considerable interest concerning the global effects of biomass burning on concentrations of trace gases in the atmosphere. The paucity of reported studies and investigations into the effects of the Greenhouse Gases such as carbon dioxide (CO2), methane (CH4) and nitrous oxide (N2O), up until about a decade ago, would suggest that the topic was not then one of universal concern. Efforts are now being made to understand the biogenic, anthropogenic and photochemical sources of atmospheric trace gases. Biomass burning which includes the burning of forests for clearing, the burning of vegetative stubble after harvesting, and lightning and human-induced wildfires is but one consideration under the general paradigm of atmospheric perturbations. A team of researchers from the Langley Research Center, along with the Canadian Forest Ministry, Ontario, Canada collaborated in an experiment in a deforestration effort through a prescribed burn. Through a specially designed experimental modeling and instrumentation, a substantial pre-burn data set was collected. The primary focus of the pre-burn experimental activities was the emission of nitrous oxide (N2O) gas from selected sites.

SSTO vs TSTO design considerations—an assessment of the overall performance, design considerations, technologies, costs, and sensitivities of SSTO and TSTO designs using modern technologies

NASA Astrophysics Data System (ADS)

Penn, Jay P.

1996-03-01

It is generally believed by those skilled in launch system design that Single-Stage-To-Orbit (SSTO) designs are more technically challenging, more performance sensitive, and yield larger lift-off weights than do Two-Stage-To-Orbit designs (TSTO's) offering similar payload delivery capability. Without additional insight into the other considerations which drive the development, recurring costs, operability, and reliability of a launch fleet, an analyst may easily conclude that the higher performing, less sensitive TSTO designs, thus yield a better solution to achieving low cost payload delivery. This limited insight could justify an argument to eliminate the X-33 SSTO technology/demonstration development effort, and thus proceed directly to less risky TSTO designs. Insight into real world design considerations of launch vehicles makes the choice of SSTO vs TSTO much less clear. The presentation addresses a more comprehensive evaluation of the general class of SSTO and TSTO concepts. These include pure SSTO's, augmented SSTO's, Siamese Twin, and Pure TSTO designs. The assessment considers vehicle performance and scaling relationships which characterize real vehicle designs. The assessment also addresses technology requirements, operations and supportability, cost implications, and sensitivities. Results of the assessment indicate that the trade space between various SSTO and TSTO design approaches is complex and not yet fully understood. The results of the X-33 technology demonstrators, as well as additional parametric analysis is required to better define the relative performance and costs of the various design approaches. The results also indicate that with modern technologies and today's better understanding of vehicle design considerations, the perception that SSTO's are dramatically heavier and more sensitive than TSTO designs is more of a myth, than reality.

U.S. Seismic Design Maps Web Application

NASA Astrophysics Data System (ADS)

Martinez, E.; Fee, J.

2015-12-01

The application computes earthquake ground motion design parameters compatible with the International Building Code and other seismic design provisions. It is the primary method for design engineers to obtain ground motion parameters for multiple building codes across the country. When designing new buildings and other structures, engineers around the country use the application. Users specify the design code of interest, location, and other parameters to obtain necessary ground motion information consisting of a high-level executive summary as well as detailed information including maps, data, and graphs. Results are formatted such that they can be directly included in a final engineering report. In addition to single-site analysis, the application supports a batch mode for simultaneous consideration of multiple locations. Finally, an application programming interface (API) is available which allows other application developers to integrate this application's results into larger applications for additional processing. Development on the application has proceeded in an iterative manner working with engineers through email, meetings, and workshops. Each iteration provided new features, improved performance, and usability enhancements. This development approach positioned the application to be integral to the structural design process and is now used to produce over 1800 reports daily. Recent efforts have enhanced the application to be a data-driven, mobile-first, responsive web application. Development is ongoing, and source code has recently been published into the open-source community on GitHub. Open-sourcing the code facilitates improved incorporation of user feedback to add new features ensuring the application's continued success.

Research design considerations for single-dose analgesic clinical trials in acute pain: IMMPACT recommendations.

PubMed

Cooper, Stephen A; Desjardins, Paul J; Turk, Dennis C; Dworkin, Robert H; Katz, Nathaniel P; Kehlet, Henrik; Ballantyne, Jane C; Burke, Laurie B; Carragee, Eugene; Cowan, Penney; Croll, Scott; Dionne, Raymond A; Farrar, John T; Gilron, Ian; Gordon, Debra B; Iyengar, Smriti; Jay, Gary W; Kalso, Eija A; Kerns, Robert D; McDermott, Michael P; Raja, Srinivasa N; Rappaport, Bob A; Rauschkolb, Christine; Royal, Mike A; Segerdahl, Märta; Stauffer, Joseph W; Todd, Knox H; Vanhove, Geertrui F; Wallace, Mark S; West, Christine; White, Richard E; Wu, Christopher

2016-02-01

This article summarizes the results of a meeting convened by the Initiative on Methods, Measurement, and Pain Assessment in Clinical Trials (IMMPACT) on key considerations and best practices governing the design of acute pain clinical trials. We discuss the role of early phase clinical trials, including pharmacokinetic-pharmacodynamic (PK-PD) trials, and the value of including both placebo and active standards of comparison in acute pain trials. This article focuses on single-dose and short-duration trials with emphasis on the perioperative and study design factors that influence assay sensitivity. Recommendations are presented on assessment measures, study designs, and operational factors. Although most of the methodological advances have come from studies of postoperative pain after dental impaction, bunionectomy, and other surgeries, the design considerations discussed are applicable to many other acute pain studies conducted in different settings.

Statistical considerations in monitoring birds over large areas

USGS Publications Warehouse

Johnson, D.H.

2000-01-01

The proper design of a monitoring effort depends primarily on the objectives desired, constrained by the resources available to conduct the work. Typically, managers have numerous objectives, such as determining abundance of the species, detecting changes in population size, evaluating responses to management activities, and assessing habitat associations. A design that is optimal for one objective will likely not be optimal for others. Careful consideration of the importance of the competing objectives may lead to a design that adequately addresses the priority concerns, although it may not be optimal for any individual objective. Poor design or inadequate sample sizes may result in such weak conclusions that the effort is wasted. Statistical expertise can be used at several stages, such as estimating power of certain hypothesis tests, but is perhaps most useful in fundamental considerations of describing objectives and designing sampling plans.

Particle identification at an asymmetric B Factory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coyle, P.; Eigen, G.; Hitlin, D.

1991-09-01

Particle identification systems are an important component of any detector at a high-luminosity, asymmetric B Factory. In particular, excellent hadron identification is required to probe CP violation in B{sup 0} decays to CP eigenstates. The particle identification systems discussed below also provide help in separating leptons from hadrons at low momenta. We begin this chapter with a discussion of the physics motivation for providing particle identification, the inherent limitations due to interactions and decays in flight, and the requirements for hermiticity and angular coverage. A special feature of an asymmetric B Factory is the resulting asymmetry in the momentum distributionmore » as a function of polar angle; this will also be quantified and discussed. In the next section the three primary candidates, time-of-flight (TOF), energy loss (dE/dx), and Cerenkov counters, both ring-imaging and threshold, will be briefly described and evaluated. Following this, one of the candidates, a long-drift Cerenkov ring-imaging device, is described in detail to provide a reference design. Design considerations for a fast RICH are then described. A detailed discussion of aerogel threshold counter designs and associated R D conclude the chapter. 56 refs., 64 figs., 13 tabs.« less

Mini-Split Heat Pump Evaluation and Zero Energy Ready Home Support

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herk, Anastasia

This project was created from a partnership between the U.S. Department of Energy’s (DOE’s) Building America research team IBACOS, Inc. and Imagine Homes, a production homebuilder of high-performance homes in San Antonio, Texas—a hot-humid climate. The primary purpose was to evaluate the performance of a multihead mini-split heat pump (MSHP) space-conditioning system, which consists of ducted and ductless indoor units, in maintaining uniform comfort in an occupied test house. The research team evaluated the MSHP space-conditioning strategy for its effectiveness in achieving uniform temperature and relative humidity (RH) levels throughout the test house and for overall constructability and cost. Thismore » evaluation was based on data that were collected from short-term tests and monitoring during 1 year of occupancy, as well as from builder and occupant feedback. Design considerations for integrating an MSHP system into the builder’s full range of production home designs were also explored, with a focus on minimizing the cost and complexity of the system design while meeting the thermal loads of the house and providing occupant comfort according to ANSI/ASHRAE Standard 55-2010 (ASHRAE 2010a).« less

Solar Absorption Refrigeration System for Air-Conditioning of a Classroom Building in Northern India

NASA Astrophysics Data System (ADS)

Agrawal, Tanmay; Varun; Kumar, Anoop

2015-10-01

Air-conditioning is a basic tool to provide human thermal comfort in a building space. The primary aim of the present work is to design an air-conditioning system based on vapour absorption cycle that utilizes a renewable energy source for its operation. The building under consideration is a classroom of dimensions 18.5 m × 13 m × 4.5 m located in Hamirpur district of Himachal Pradesh in India. For this purpose, cooling load of the building was calculated first by using cooling load temperature difference method to estimate cooling capacity of the air-conditioning system. Coefficient of performance of the refrigeration system was computed for various values of strong and weak solution concentration. In this work, a solar collector is also designed to provide required amount of heat energy by the absorption system. This heat energy is taken from solar energy which makes this system eco-friendly and sustainable. A computer program was written in MATLAB to calculate the design parameters. Results were obtained for various values of solution concentrations throughout the year. Cost analysis has also been carried out to compare absorption refrigeration system with conventional vapour compression cycle based air-conditioners.

Design Considerations for Creating a Chemical Information Workstation.

ERIC Educational Resources Information Center

Mess, John A.

1995-01-01

Discusses what a functional chemical information workstation should provide to support the users in an academic library and examines how it can be implemented. Highlights include basic design considerations; natural language interface, including grammar-based, context-based, and statistical methodologies; expert system interface; and programming…

Lunar Module Electrical Power System Design Considerations and Failure Modes

NASA Technical Reports Server (NTRS)

Interbartolo, Michael

2009-01-01

This slide presentation reviews the design and redesign considerations of the Apollo lunar module electrical power system. Included in the work are graphics showing the lunar module power system. It describes the in-flight failures, and the lessons learned from these failures.

Prevalence of Intimate Partner Violence among Women Veterans who Utilize Veterans Health Administration Primary Care.

PubMed

Kimerling, Rachel; Iverson, Katherine M; Dichter, Melissa E; Rodriguez, Allison L; Wong, Ava; Pavao, Joanne

2016-08-01

The objectives of this study were to identify the prevalence of past-year intimate partner violence (IPV) among women Veterans utilizing Veterans Health Administration (VHA) primary care, and to document associated demographic, military, and primary care characteristics. This was a retrospective cohort design, where participants completed a telephone survey in 2012 (84% participation rate); responses were linked to VHA administrative data for utilization in the year prior to the survey. A national stratified random sample of 6,287 women Veteran VHA primary care users participated in the study. Past-year IPV was assessed using the HARK screening tool. Self-report items and scales assessed demographic and military characteristics. Primary care characteristics were assessed via self-report and VHA administrative data. The prevalence of past-year IPV among women Veterans was 18.5% (se = 0.5%), with higher rates (22.2% - 25.5%) among women up to age 55. Other demographic correlates included indicators of economic hardship, lesbian or bisexual orientation, and being a parent/guardian of a child less than 18 years old. Military correlates included service during Vietnam to post-Vietnam eras, less than 10 years of service, and experiences of Military Sexual Trauma (MST). Most (77.3%, se = 1.2%) women who experienced IPV identified a VHA provider as their usual provider. Compared with women who did not report past-year IPV, women who reported IPV had more primary care visits, yet experienced lower continuity of care across providers. The high prevalence of past-year IPV among women beyond childbearing years, the majority of whom primarily rely on VHA as a source of health care, reinforces the importance of screening all women for IPV in VHA primary care settings. Key considerations for service implementation include sensitivity with respect to sexual orientation, race/ethnicity, and other aspects of diversity, as well as care coordination and linkages with social services and MST-related care.

Nurse perspectives on the implementation of routine telemonitoring for high-risk diabetes patients in a primary care setting.

PubMed

Vest, Bonnie M; Hall, Victoria M; Kahn, Linda S; Heider, Arvela R; Maloney, Nancy; Singh, Ranjit

2017-01-01

Aims The purpose of this qualitative evaluation was to explore the experience of implementing routine telemonitoring (TM) in real-world primary care settings from the perspective of those delivering the intervention; namely the TM staff, and report on lessons learned that could inform future projects of this type. Routine TM for high-risk patients within primary care practices may help improve chronic disease control and reduce complications, including unnecessary hospital admissions. However, little is known about how to integrate routine TM in busy primary care practices. A TM pilot for diabetic patients was attempted in six primary care practices as part of the Beacon Community in Western New York. Semi-structured interviews were conducted with representatives of three TM agencies (n=8) participating in the pilot. Interviews were conducted over the phone or in person and lasted ~30 min. Interviews were audio-taped and transcribed. Analysis was conducted using immersion-crystallization to identify themes. Findings TM staff revealed several themes related to the experience of delivering TM in real-world primary care: (1) the nurse-patient relationship is central to a successful TM experience, (2) TM is a useful tool for understanding socio-economic context and its impact on patients' health, (3) TM staff anecdotally report important potential impacts on patient health, and (4) integrating TM into primary care practices needs to be planned carefully. This qualitative study identified challenges and unexpected benefits that might inform future efforts. Communication and integration between the TM agency and the practice, including the designation of a point person within the office to coordinate TM and help address the broader contextual needs of patients, are important considerations for future implementation. The role of the TM nurse in developing trust with patients and uncovering the social and economic context within which patients manage their diabetes was an unexpected benefit.

Impact of implant design on primary stability of orthodontic mini-implants.

PubMed

Wilmes, Benedict; Ottenstreuer, Stephanie; Su, Yu-Yu; Drescher, Dieter

2008-01-01

Skeletal anchorage with mini-implants has greatly broadened the treatment possibilities in orthodontics over the last few years. To reduce implant failure rates, it is advisable to obtain adequate primary stability. The aim of this study was to quantitatively analyze the impact of implant design and dimension on primary stability. Forty-two porcine iliac bone segments were prepared and embedded in resin. To evaluate the primary stability, we documented insertion torques of the following mini-implants: Aarhus Screw, AbsoAnchor, LOMAS, Micro-Anchorage-System, ORLUS and Spider Screw. In each bone, five Dual Top Screws were inserted for reference purposes to achieve comparability among the specimens. We observed wide variation in insertion torques and hence primary stability, depending on mini-implant design and dimension; the great impact that mini-implant diameter has on insertion torques was particularly conspicuous. Conical mini-implants achieved higher primary stabilities than cylindrical designs. The diameter and design of the mini-implant thread have a distinctive impact on primary stability. Depending on the region of insertion and local bone quality, the choice of the mini-implant design and size is crucial to establish sufficient primary stability.

Human Factors Considerations in System Design

NASA Technical Reports Server (NTRS)

Mitchell, C. M. (Editor); Vanbalen, P. M. (Editor); Moe, K. L. (Editor)

1983-01-01

Human factors considerations in systems design was examined. Human factors in automated command and control, in the efficiency of the human computer interface and system effectiveness are outlined. The following topics are discussed: human factors aspects of control room design; design of interactive systems; human computer dialogue, interaction tasks and techniques; guidelines on ergonomic aspects of control rooms and highly automated environments; system engineering for control by humans; conceptual models of information processing; information display and interaction in real time environments.

70,489 primary care encounters: retrospective analysis of morbidity at a primary care centre in Ireland.

PubMed

Molony, D; Beame, C; Behan, W; Crowley, J; Dennehy, T; Quinlan, M; Cullen, W

2016-11-01

While considerable changes are happening in primary care in Ireland and considerable potential exists in intelligence derived from practice-based data to inform these changes, relatively few large-scale general morbidity surveys have been published. To examine the most common reasons why people attend primary care, specifically 'reasons for encounter' (RFEs) among the general practice population and among specific demographic groups (i.e., young children and older adults). We retrospectively examined clinical encounters (which had a diagnostic code) over a 4-year time period. Descriptive analyses were conducted on anonymised data. 70,489 RFEs consultations were recorded (mean 13.53 recorded RFEs per person per annum) and consultations involving multiple RFEs were common. RFE categories for which codes were most commonly recorded were: 'general/unspecified' (31.6 %), 'respiratory' (15.4 %) and 'musculoskeletal' (12.6 %). Most commonly recorded codes were: 'medication renewal' (6.8 %), 'cough' (6.6 %), and 'health maintenance/prevention' (5.8 %). There was considerable variation in the number of RFEs recorded per age group. 6239 RFEs (8.9 %) were recorded by children under 6 years and 15,295 RFEs (21.7 %) were recorded by adults aged over 70. RFEs recorded per calendar month increased consistently through the study period and there was a marked seasonal and temporal variation in the number of RFEs recorded. Practice databases can generate intelligence on morbidity and health service utilisation in the community. Future research to optimise diagnostic coding at a practice level and to promote this activity in a more representative sample of practices is a priority.

Sex, race, and consideration of bariatric surgery among primary care patients with moderate to severe obesity.

PubMed

Wee, Christina C; Huskey, Karen W; Bolcic-Jankovic, Dragana; Colten, Mary Ellen; Davis, Roger B; Hamel, Marybeth

2014-01-01

Bariatric surgery is one of few obesity treatments to produce substantial weight loss but only a small proportion of medically-eligible patients, especially men and racial minorities, undergo bariatric surgery. To describe primary care patients' consideration of bariatric surgery, potential variation by sex and race, and factors that underlie any variation. Telephone interview of 337 patients with a body mass index or BMI > 35 kg/m(2) seen at four diverse primary care practices in Greater-Boston. Patients' consideration of bariatric surgery. Of 325 patients who had heard of bariatric surgery, 34 % had seriously considered surgery. Men were less likely than women and African Americans were less likely than Caucasian patients to have considered surgery after adjustment for sociodemographics and BMI. Comorbid conditions did not explain sex and racial differences but racial differences dissipated after adjustment for quality of life (QOL), which tended to be higher among African American than Caucasian patients. Physician recommendation of bariatric surgery was independently associated with serious consideration for surgery [OR 4.95 (95 % CI 2.81-8.70)], but did not explain variation in consideration of surgery across sex and race. However, if recommended by their doctor, men were as willing and African American and Hispanic patients were more willing to consider bariatric surgery than their respective counterparts after adjustment. Nevertheless, only 20 % of patients reported being recommended bariatric surgery by their doctor and African Americans and men were less likely to receive this recommendation; racial differences in being recommended surgery were also largely explained by differences in QOL. High perceived risk to bariatric surgery was the most commonly cited barrier; financial concerns were uncommonly cited. Single geographic region; examined consideration and not who eventually proceeded with bariatric surgery. African Americans and men were less likely to have considered bariatric surgery and were less likely to have been recommended surgery by their doctors. Differences in how obesity affects QOL appear to account for some of these variations. High perceived risk rather than financial barrier was the major deterrent for patients.

Shipyard Standards Program Development Guide

DTIC Science & Technology

1992-10-01

Given the opportunity, designers will use designs that have worked for them in the past . Unfortunately, not all designers have the same experience base...standards formally approved by shipyard management? The subject of labor productivity standards has received considerable attention during the past decade. A...research into this consideration during the past decade. References [23], [24], [25], [26], and [27] have reported beneficial results obtained by getting the

Microcomputer Program Design Considerations for the Novice User

DTIC Science & Technology

1987-03-01

relatively recent, widespread proliferation of microcomputers into both the home and work place has resulted in a shifting of computer operation and...design decisions be made with respect to both the requirements specifications and interface considerations. Since a project’s requirement...expertise, may be quite meaningless or confusing to the end user. It is therefore proposed that interface design decisions should be made under the assumption

The Roles of Technology in Primary HIV Prevention for Men Who Have Sex with Men.

PubMed

Sullivan, Patrick S; Jones, Jeb; Kishore, Nishant; Stephenson, Rob

2015-12-01

Men who have sex with men (MSM) are at disproportionate risk for HIV infection globally. The past 5 years have seen considerable advances in biomedical interventions to reduce the risk of HIV infection. To be impactful in reducing HIV incidence requires the rapid and expansive scale-up of prevention. One mechanism for achieving this is technology-based tools to improve knowledge, acceptability, and coverage of interventions and services. This review provides a summary of the current gap in coverage of primary prevention services, how technology-based interventions and services can address gaps in coverage, and the current trends in the development and availability of technology-based primary prevention tools for use by MSM. Results from agent-based models of HIV epidemics of MSM suggest that 40-50 % coverage of multiple primary HIV prevention interventions and services, including biomedical interventions like preexposure prophylaxis, will be needed to reduce HIV incidence among MSM. In the USA, current levels of coverage for all interventions, except HIV testing and condom distribution, fall well short of this target. Recent findings illustrate how technology-based HIV prevention tools can be used to provide certain kinds of services at much larger scale, with marginal incremental costs. A review of mobile apps for primary HIV prevention revealed that most are designed by nonacademic, nonpublic health developers, and only a small proportion of available mobile apps specifically address MSM populations. We are unlikely to reach the required scale of HIV prevention intervention coverage for MSM unless we can leverage technologies to bring key services to broad coverage for MSM. Despite an exciting pipeline of technology-based prevention tools, there are broader challenges with funding structures and sustainability that need to be addressed to realize the full potential of this emerging public health field.

Team dynamics, clinical work satisfaction, and patient care coordination between primary care providers: A mixed methods study.

PubMed

Song, Hummy; Ryan, Molly; Tendulkar, Shalini; Fisher, Josephine; Martin, Julia; Peters, Antoinette S; Frolkis, Joseph P; Rosenthal, Meredith B; Chien, Alyna T; Singer, Sara J

Team-based care is essential for delivering high-quality, comprehensive, and coordinated care. Despite considerable research about the effects of team-based care on patient outcomes, few studies have examined how team dynamics relate to provider outcomes. The aim of this study was to examine relationships among team dynamics, primary care provider (PCP) clinical work satisfaction, and patient care coordination between PCPs in 18 Harvard-affiliated primary care practices participating in Harvard's Academic Innovations Collaborative. First, we administered a cross-sectional survey to all 548 PCPs (267 attending clinicians, 281 resident physicians) working at participating practices; 65% responded. We assessed the relationship of team dynamics with PCPs' clinical work satisfaction and perception of patient care coordination between PCPs, respectively, and the potential mediating effect of patient care coordination on the relationship between team dynamics and work satisfaction. In addition, we embedded a qualitative evaluation within the quantitative evaluation to achieve a convergent mixed methods design to help us better understand our findings and illuminate relationships among key variables. Better team dynamics were positively associated with clinical work satisfaction and quality of patient care coordination between PCPs. Coordination partially mediated the relationship between team dynamics and satisfaction for attending clinicians, suggesting that higher satisfaction depends, in part, on better teamwork, yielding more coordinated patient care. We found no mediating effects for resident physicians. Qualitative results suggest that sources of satisfaction from positive team dynamics for PCPs may be most relevant to attending clinicians. Improving primary care team dynamics could improve clinical work satisfaction among PCPs and patient care coordination between PCPs. In addition to improving outcomes that directly concern health care providers, efforts to improve aspects of team dynamics may also help resolve critical challenges in workforce planning in primary care.

Optimal primary febrile neutropenia prophylaxis for patients receiving docetaxel-cyclophosphamide chemotherapy for breast cancer: a systematic review.

PubMed

Fernandes, Ricardo; Mazzarello, Sasha; Stober, Carol; Vandermeer, Lisa; Dudani, Shaan; Ibrahim, Mohamed F K; Majeed, Habeeb; Perdrizet, Kirstin; Shorr, Risa; Hutton, Brian; Fergusson, Dean; Clemons, Mark

2017-01-01

Due to the high rate of febrile neutropenia (FN) with docetaxel-cyclophosphamide (DC) chemotherapy, primary FN prophylaxis is recommended. However, the optimal choice of prophylaxis [i.e., granulocyte-colony stimulating factors (G-CSF) or antibiotics] is unknown. A systematic review was performed to address this knowledge gap. Embase, Ovid Medline, Pubmed, the Cochrane database of systematic reviews, and Cochrane register of controlled trials were searched from 1946 to April 2016 for studies evaluating primary prophylactic FN treatments in breast cancer patients receiving DC chemotherapy. Outcome measures evaluated included: incidence of FN and treatment-related hospitalizations, chemotherapy dose reduction/delays/discontinuations, and adverse events. Screening and data collection were performed by two independent reviewers. Of 2105 identified records, 7 studies (n = 2535) met the pre-specified eligibility criteria. Seven additional studies (n = 621) were identified from prior systematic reviews. There were 3 randomized controlled trials (RCTs) (n = 2256) and 11 retrospective studies (n = 900). Study sample sizes ranged from 30 to 982 patients (median 99.5), evaluating pegfilgrastim (n = 1274), filgrastim (n = 1758), and oral ciprofloxacin (n = 108). Given the heterogeneity of patients and study design, a narrative synthesis of results was performed. Median FN rates with and without primary prophylaxis were 6.6 % (IQR 3.9-10.6 %) and 31.3 % (IQR 25-33 %), respectively. No FN-related deaths were reported. No RCT directly compared G-CSF with antibiotic interventions. Primary FN prophylaxis reduces the incidence of FN. Despite considerable cost and toxicity differences between G-CSF and antibiotics, there is insufficient data to make a recommendation of one strategy over another.

Design and challenges for a randomized, multi-site clinical trial comparing the use of service dogs and emotional support dogs in Veterans with post-traumatic stress disorder (PTSD).

PubMed

Saunders, Gabrielle H; Biswas, Kousick; Serpi, Tracey; McGovern, Stephanie; Groer, Shirley; Stock, Eileen M; Magruder, Kathryn M; Storzbach, Daniel; Skelton, Kelly; Abrams, Thad; McCranie, Mark; Richerson, Joan; Dorn, Patricia A; Huang, Grant D; Fallon, Michael T

2017-11-01

Posttraumatic stress disorder (PTSD) is a leading cause of impairments in quality of life and functioning among Veterans. Service dogs have been promoted as an effective adjunctive intervention for PTSD, however published research is limited and design and implementation flaws in published studies limit validated conclusions. This paper describes the rationale for the study design, a detailed methodological description, and implementation challenges of a multisite randomized clinical trial examining the impact of service dogs on the on the functioning and quality of life of Veterans with PTSD. Trial design considerations prioritized participant and intervention (dog) safety, selection of an intervention comparison group that would optimize enrollment in all treatment arms, pragmatic methods to ensure healthy well-trained dogs, and the selection of outcomes for achieving scientific and clinical validity in a Veteran PTSD population. Since there is no blueprint for conducting a randomized clinical trial examining the impact of dogs on PTSD of this size and scope, it is our primary intent that the successful completion of this trial will set a benchmark for future trial design and scientific rigor, as well as guiding researchers aiming to better understand the role that dogs can have in the management of Veterans experiencing mental health conditions such as PTSD. Published by Elsevier Inc.

MDO and Cross-Disciplinary Practice in R&D: A Portrait of Principles and Current Practice

NASA Technical Reports Server (NTRS)

Rivas McGowan, Anna-Maria; Papalambros, Panos Y.; Baker, Wayne E.

2014-01-01

For several decades, Multidisciplinary Design Optimization (MDO) has served an important role in aerospace engineering by incorporating physics based disciplinary models into integrated system or sub-system models for use in research, development, (R&D) and design. This paper examines MDO's role in facilitating the integration of the researchers from different single disciplines during R&D and early design of large-scale complex engineered systems (LaCES) such as aerospace systems. The findings in this paper are summarized from a larger study on interdisciplinary practices and perspectives that included considerable empirical data from surveys, interviews, and ethnography. The synthesized findings were derived by integrating the data with theories from organization science and engineering. The over-arching finding is that issues related to cognition, organization, and social interrelations mostly dominate interactions across disciplines. Engineering issues, such as the integration of hardware or physics-based models, are not as significant. Correspondingly, the data showed that MDO is not the primary integrator of researchers working across disciplines during R&D and early design of LaCES. Cognitive focus such as analysis versus design, organizational challenges such as incentives, and social opportunities such as personal networks often drove the human interactive practices among researchers from different disciplines. Facilitation of the inherent confusion, argument, and learning in crossdisciplinary research was identified as one of several needed elements of enabling successful research across disciplines.

Electromagnetic Design and Performance of a Conical Microwave Blackbody Target for Radiometer Calibration

NASA Astrophysics Data System (ADS)

Houtz, Derek A.; Emery, William; Gu, Dazhen; Jacob, Karl; Murk, Axel; Walker, David K.; Wylde, Richard J.

2017-08-01

A conical cavity has been designed and fabricated for use as a broadband passive microwave calibration source, or blackbody, at the National Institute of Standards and Technology. The blackbody will be used as a national primary standard for brightness temperature and will allow for the prelaunch calibration of spaceborne radiometers and calibration of ground-based systems to provide traceability among radiometric data. The conical geometry provides performance independent of polarization, minimizing reflections, and standing waves, thus having a high microwave emissivity. The conical blackbody has advantages over typical pyramidal array geometries, including reduced temperature gradients and excellent broadband electromagnetic performance over more than a frequency decade. The blackbody is designed for use between 18 and 230 GHz, at temperatures between 80 and 350 K, and is vacuum compatible. To approximate theoretical blackbody behavior, the design maximizes emissivity and thus minimizes reflectivity. A newly developed microwave absorber is demonstrated that uses cryogenically compatible, thermally conductive two-part epoxy with magnetic carbonyl iron (CBI) powder loading. We measured the complex permittivity and permeability properties for different CBI-loading percentages; the conical absorber is then designed and optimized with geometric optics and finite-element modeling, and finally, the reflectivity of the resulting fabricated structure is measured. We demonstrated normal incidence reflectivity considerably below -40 dB at all relevant remote sensing frequencies.

Some design considerations for solar-powered aircraft

NASA Technical Reports Server (NTRS)

Phillips, W. H.

1980-01-01

Performance and operating characteristics are presented for a solar powered aircraft intended to remain aloft for long periods. The critical technologies which limit the performance are identified. By using the techniques presented, the effects of variation in the system parameters are studied. Practical design consideration are discussed.

Considerations for management of migraine symptoms in the primary care setting.

PubMed

Silberstein, Stephen D

2016-06-01

Migraine is a common disabling brain disorder that affects one in seven US citizens annually. The burden of migraine is substantial, both in economic terms and for individual patients and their close family members. Initial medical consultations for migraine are usually with a primary care physician (PCP), and it is predominantly managed in a primary care setting; therefore, PCPs need a thorough understanding of migraine and the treatment options. This review provides an overview of the prevalence, symptoms, burden, and diagnosis of migraine with a focus on adults. Important aspects of migraine management, such as medication overuse and chronic migraine, are highlighted and insight is provided into factors for consideration when prescribing acute/abortive treatment for migraine to ensure that individual patients receive optimal pharmaceutical management. The effects of associated symptoms, e.g. nausea/vomiting, on treatment efficacy are pertinent in migraine; however, many therapy options, including alternative delivery systems, are available, thus facilitating the selection of optimal treatment for an individual patient.

Methodological difficulties in the conduct of neuroepidemiological studies in low- and middle-income countries.

PubMed

Bharucha, Nadir; Odermatt, Peter; Preux, Pierre-Marie

2014-01-01

The majority of people with epilepsy (PWE) live in low- and middle-income countries (LMICs). However, they remain largely untreated and the bulk of resources are used to treat patients in the developed world. This disparity constitutes a challenge for neuroepidemiological studies on a global scale. In the past, several studies have focused on diverse populations in disparate countries at various periods of time and for particular purposes. The specificity of different contexts and circumstances makes it difficult to analyse PWE as a group either qualitatively or quantitatively. Such methodological limitations are further complicated by a lack of logistical support. There is a lack of interest in conducting studies, which results in inadequate funding and, in addition, there is the considerable challenge of publishing research reports from LMICs in peer-reviewed international journals. This paper focuses on methodological problems related to studies in LMICs and attempts to give the reasons for their limitations using epilepsy as an example. Regional conditions and environmental factors must be given careful consideration in the research design because of the importance of understanding the challenges of living in these environments. There are further limitations to the successful implementation of studies. Existing information on epilepsy is often not readily accessible; there is a lack of census data, and migratory patterns into cities make enumeration and sampling even more challenging. As there is usually no well-developed healthcare system a door-to-door screening process is often the only way to identify those with convulsive epilepsy. The questionnaire and study design should preferably be adapted from standardized protocols, and pre-tested and validated in local conditions. Systematic reviews and meta-analyses of studies in LMICs can provide data on the burden, risk factors, treatment and outcome of epilepsy only if the primary studies used are properly conducted using uniform and comparable methodology. The use of consistent replicable neuroepidemiological methods in primary studies and systematic reviews enable reduction of the treatment gap and better epilepsy care. © 2013 S. Karger AG, Basel.

Practical Applications of Cosmic Ray Science: Spacecraft, Aircraft, Ground-Based Computation and Control Systems, and Human Health and Safety

NASA Technical Reports Server (NTRS)

Atwell, William; Koontz, Steve; Normand, Eugene

2012-01-01

Three twentieth century technological developments, 1) high altitude commercial and military aircraft; 2) manned and unmanned spacecraft; and 3) increasingly complex and sensitive solid state micro-electronics systems, have driven an ongoing evolution of basic cosmic ray science into a set of practical engineering tools needed to design, test, and verify the safety and reliability of modern complex technological systems. The effects of primary cosmic ray particles and secondary particle showers produced by nuclear reactions with the atmosphere, can determine the design and verification processes (as well as the total dollar cost) for manned and unmanned spacecraft avionics systems. Similar considerations apply to commercial and military aircraft operating at high latitudes and altitudes near the atmospheric Pfotzer maximum. Even ground based computational and controls systems can be negatively affected by secondary particle showers at the Earth s surface, especially if the net target area of the sensitive electronic system components is large. Finally, accumulation of both primary cosmic ray and secondary cosmic ray induced particle shower radiation dose is an important health and safety consideration for commercial or military air crews operating at high altitude/latitude and is also one of the most important factors presently limiting manned space flight operations beyond low-Earth orbit (LEO). In this paper we review the discovery of cosmic ray effects on the performance and reliability of microelectronic systems as well as human health and the development of the engineering and health science tools used to evaluate and mitigate cosmic ray effects in ground-based atmospheric flight, and space flight environments. Ground test methods applied to microelectronic components and systems are used in combinations with radiation transport and reaction codes to predict the performance of microelectronic systems in their operating environments. Similar radiation transport codes are used to evaluate possible human health effects of cosmic ray exposure, however, the health effects are based on worst-case analysis and extrapolation of a very limited human exposure data base combined with some limited experimental animal data. Finally, the limitations on human space operations beyond low-Earth orbit imposed by long term exposure to galactic cosmic rays are discussed.

Job stressors, personality and burnout in primary school teachers.

PubMed

Kokkinos, Constantinos M

2007-03-01

Teaching is considered a highly stressful occupation. Burnout is a negative affective response occurring as a result of chronic work stress. While the early theories of burnout focused exclusively on work-related stressors, recent research adopts a more integrative approach where both environmental and individual factors are studied. Nevertheless, such studies are scarce with teacher samples. The present cross-sectional study sought to investigate the association between burnout, personality characteristics and job stressors in primary school teachers from Cyprus. The study also investigates the relative contribution of these variables on the three facets of burnout - emotional exhaustion, depersonalization and reduced personal accomplishment. A representative sample of 447 primary school teachers participated in the study. Teachers completed measures of burnout, personality and job stressors along with demographic and professional data. Surveys were delivered by courier to schools, and were distributed at faculty meetings. Results showed that both personality and work-related stressors were associated with burnout dimensions. Neuroticism was a common predictor of all dimensions of burnout although in personal accomplishment had a different direction. Managing student misbehaviour and time constraints were found to systematically predict dimensions of burnout. Teachers' individual characteristics as well as job related stressors should be taken into consideration when studying the burnout phenomenon. The fact that each dimension of the syndrome is predicted by different variables should not remain unnoticed especially when designing and implementing intervention programmes to reduce burnout in teachers.

Responsibilities in cancer preventive care in Greece. A physicians' survey.

PubMed

Zacharias, Georgios; Xilomenos, Apostolos; Koukourakis, Georgios; Kamposioras, Konstantinos; Mauri, Davide; Chasioti, Dimitra; Bristianou, Magdalini; Ferentinos, Georgios; Levantakis, Ioannis; Tsali, Lamprini; Valachis, Antonis; Karampoiki, Vassiliki

2008-04-01

Colorectal cancer is the second leading cause of cancer death in European countries. Differences in screening implementation may explain USA vs. European survival differences. The proportion of European primary care physicians advising colorectal screening has been reported to be inconsistent. We therefore hypothesised the presence of a belief-related bias among European physicians regarding who is responsible for cancer screening delivery. To index beliefs in cancer screening implementation among a wide sample of Greek physicians. Study design Cross-sectional survey. Three hundred and sixty-six physicians involved in primary care activities in 15 provinces answered a questionnaire about responsibility in cancer screening delivery. Results 22.4% and 7.6% of physicians declared that the health system and the patients, respectively, have the main responsibility for cancer screening implementation, while 70 % advocated patient-health system co-responsibility. Beliefs were statistically correlated to age (p=0.039) and specialisation category (p=0.002). Patients' will was mainly indicated by internists, trainee internists and physicians older than 30, while GPs, trainee GPs and house officers were mainly health system-oriented. Worryingly, when physicians were asked about which specialty should inform the population, 81% indicated family doctor (for-fee-service) while the involvement of free-from-fee specialities was inconsistent. A considerable disorientation about responsibilities in cancer screening delivery was observed in our study sample. Continual medical education and clear redefinition of primary care physicians' activities are required.

Design and application of electromechanical actuators for deep space missions

NASA Technical Reports Server (NTRS)

Haskew, Tim A.; Wander, John

1994-01-01

This progress report documents research and development efforts performed from August 16, 1993 through February 15, 1994 on NASA Grant NAG8-240, 'Design and Application of Electromechanical Actuators for Deep Space Missions.' Following the executive summary are four report sections: Motor Selection, Tests Stand Development, Health Monitoring and Fault Management, and Experiment Planning. Three specific motor types have been considered as prime movers for TVC EMA applications: the brushless dc motor, the permanent magnet synchronous motor, and the induction motor. The fundamental finding was that, in general, the primary performance issues were energy efficiency and thermal dissipation (rotor heating). In terms of all other issues, the three motor types were found to compare quite equally. Among the design changes made to the test stand since the last progress report is the addition of more mounting holes in the side beams. These additional holes allow the movable end beam to be attached in a greater number of positions than previously. With this change the movable end beam can move from full forward to full back in three inch increments. Specific mathematical details on the approach that have been employed for health monitoring and fault management (HMFM) have been reported previously. This approach is based on and adaptive Kalman filter strategy. In general, a bank of filters can be implemented for each primary fault type. Presently under consideration for the brushless dc machine are the following faults: armature winding open-circuits, armature winding short-circuits (phase-to-phase and phase-to-ground), bearing degradation, and rotor flux weakening. The mechanically oriented experiments include transient loading experiments, transverse loading experiment, friction experiment, motor performance experiment, and HMFM experiment.

What has finite element analysis taught us about diabetic foot disease and its management? A systematic review.

PubMed

Telfer, Scott; Erdemir, Ahmet; Woodburn, James; Cavanagh, Peter R

2014-01-01

Over the past two decades finite element (FE) analysis has become a popular tool for researchers seeking to simulate the biomechanics of the healthy and diabetic foot. The primary aims of these simulations have been to improve our understanding of the foot's complicated mechanical loading in health and disease and to inform interventions designed to prevent plantar ulceration, a major complication of diabetes. This article provides a systematic review and summary of the findings from FE analysis-based computational simulations of the diabetic foot. A systematic literature search was carried out and 31 relevant articles were identified covering three primary themes: methodological aspects relevant to modelling the diabetic foot; investigations of the pathomechanics of the diabetic foot; and simulation-based design of interventions to reduce ulceration risk. Methodological studies illustrated appropriate use of FE analysis for simulation of foot mechanics, incorporating nonlinear tissue mechanics, contact and rigid body movements. FE studies of pathomechanics have provided estimates of internal soft tissue stresses, and suggest that such stresses may often be considerably larger than those measured at the plantar surface and are proportionally greater in the diabetic foot compared to controls. FE analysis allowed evaluation of insole performance and development of new insole designs, footwear and corrective surgery to effectively provide intervention strategies. The technique also presents the opportunity to simulate the effect of changes associated with the diabetic foot on non-mechanical factors such as blood supply to local tissues. While significant advancement in diabetic foot research has been made possible by the use of FE analysis, translational utility of this powerful tool for routine clinical care at the patient level requires adoption of cost-effective (both in terms of labour and computation) and reliable approaches with clear clinical validity for decision making.

Proceedings: CE (Corps of Engineers) Workshop on Design and Operation of Selective Withdrawal Intake Structures Held in San Francisco, California on 24-28 June 1985.

DTIC Science & Technology

1986-05-01

design of the outlet works for Warm Springs Dam on Dry Creek in Sonoma County , California, are discussed. Water quality design considerations include both...on Dry Creek, "-’- a right-bank tributary of the Russian River, approximately 14 river miles upstream of their confluence in Sonoma County , California...Dry Creek, Sonoma County , California, are discussed. Water quality design considerations include both temperature and turbidity of discharged water

1L Mark-IV Target Design Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koehler, Paul E.

This presentation includes General Design Considerations; Current (Mark-III) Lower Tier; Mark-III Upper Tier; Performance Metrics; General Improvements for Material Science; General Improvements for Nuclear Science; Improving FOM for Nuclear Science; General Design Considerations Summary; Design Optimization Studies; Expected Mark-IV Performance: Material Science; Expected Mark-IV Performance: Nuclear Science (Disk); Mark IV Enables Much Wider Range of Nuclear-Science FOM Gains than Mark III; Mark-IV Performance Summary; Rod or Disk? Center or Real FOV?; and Project Cost and Schedule.

Overview of the Design, Development, and Application of Nickel-hydrogen Batteries

NASA Technical Reports Server (NTRS)

Thaller, Lawrence H.; Zimmerman, Albert H.

2003-01-01

This document provides an overview of the design, development, and application of nickel-hydrogen (Ni-H2) battery technology for aerospace applications. It complements and updates the information presented in NASA RP-1314, NASA Handbook for Nickel- Hydrogen Batteries, published in 1993. Since that time, nickel-hydrogen batteries have become widely accepted for aerospace energy storage requirements and much more has been learned. The intent of this document is to capture some of that additional knowledge. This document addresses various aspects of nickel-hydrogen technology including the electrochemical reactions, cell component design, and selection considerations; overall cell and battery design considerations; charge control considerations; and manufacturing issues that have surfaced over the years that nickel-hydrogen battery technology has been the major energy storage technology for geosynchronous and low-Earth-orbiting satellites.

Carrier rockets

NASA Astrophysics Data System (ADS)

Aleksandrov, V. A.; Vladimirov, V. V.; Dmitriev, R. D.; Osipov, S. O.

This book takes into consideration domestic and foreign developments related to launch vehicles. General information concerning launch vehicle systems is presented, taking into account details of rocket structure, basic design considerations, and a number of specific Soviet and American launch vehicles. The basic theory of reaction propulsion is discussed, giving attention to physical foundations, the various types of forces acting on a rocket in flight, basic parameters characterizing rocket motion, the effectiveness of various approaches to obtain the desired velocity, and rocket propellants. Basic questions concerning the classification of launch vehicles are considered along with construction and design considerations, aspects of vehicle control, reliability, construction technology, and details of structural design. Attention is also given to details of rocket motor design, the basic systems of the carrier rocket, and questions of carrier rocket development.

A qualitative study exploring the acceptability of the McNulty-Zelen design for randomised controlled trials evaluating educational interventions.

PubMed

McNulty, Cliodna; Ricketts, Ellie J; Rugman, Claire; Hogan, Angela; Charlett, Andre; Campbell, Rona

2015-11-17

Traditional randomised controlled trials evaluating the effect of educational interventions in general practice may produce biased results as participants know they are being evaluated. We aimed to explore the acceptability of a McNulty-Zelen Cluster Randomised Control Trial (CRT) design which conceals from educational participants that they are in a RCT. Consent is obtained from a trusted third party considered appropriate to give consent on participants' behalf, intervention practice staff then choose whether to attend the offered education as would occur with normal continuing professional development. We undertook semi structured telephone interviews in England with 16 general practice (GP) staff involved in a RCT evaluating an educational intervention aimed at increasing chlamydia screening tests in general practice using the McNulty-Zelen design, 4 Primary Care (PC) Research Network officers, 5 Primary Care Trust leads in Public or sexual health, and one Research Ethics committee Chair. Interviews were undertaken by members of the original intervention evaluation McNulty-Zelen design RCT study team. These experienced qualitative interviewers used an agreed semi-structured interview schedule and were careful not to lead the participants. To further mitigate against bias, the data analysis was undertaken by a researcher (CR) not involved in the original RCT. We reached data saturation and found five main themes; Support for the design: All found the McNulty-Zelen design acceptable because they considered that it generated more reliable evidence of the value of new educational interventions in real life GP settings. Lack of familiarity with study design: The design was novel to all. GP staff likened the evaluation using the McNulty-Zelen design to audit of their activities with feedback, which were to them a daily experience and therefore acceptable. Ethical considerations: Research stakeholders considered the consent procedure should be very clear and that these trial designs should go through at least a proportionate ethical review. GP staff were happy for the PCT leads to give consent on their behalf. GP research capacity and trial participation: GP staff considered the design increased generalisability, as staff who would not normally volunteer to participate in research due to perceived time constraints and paperwork might do so. Design 'worth it': All interviewees agreed that the advantages of the "more accurate" or "truer" results and information gained about uptake of workshops within Primary Care Trusts (PCTs) outweighed any disadvantages of the consent procedure. Our RCT was evaluating the effect of an educational intervention to increase chlamydia screening tests in general practices where there was routine monitoring of testing rates; our participants may have been less enthusiastic about the design if it had been evaluating a more controversial educational area, or if data monitoring was not routine. The McNulty-Zelen design should be considered for the evaluation of educational interventions, but these designs should have clear consent protocols and proportionate ethical review. The trial was registered on the UK Clinical Research Network Study Portfolio database. UKCRN9722 .

29 CFR 1471.445 - What action may I take if a primary tier participant knowingly does business with an excluded or...

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 4 2011-07-01 2011-07-01 false What action may I take if a primary tier participant... SUSPENSION (NONPROCUREMENT) Responsibilities of FMCS Officials Regarding Transactions § 1471.445 What action... agency official may refer the matter for suspension and debarment consideration. You may also disallow...

Pupils' and Teachers' Perceptions of a Culminating Festival within a Sport Education Season in Irish Primary Schools

ERIC Educational Resources Information Center

Kinchin, Gary D.; Macphail, Ann; Chroinin, Deirdre Ni

2009-01-01

Background: While there is considerable literature on Sport Education, little attention has been afforded to an investigation into the use of a specific festival as a culmination to a season. Aims: The purpose of this paper is to examine primary school pupils' and teachers' perceptions of an inter-school festival. Methods: Pupils from eight…

Transformer Impedance Reflection Demonstration

NASA Astrophysics Data System (ADS)

Layton, William

2014-10-01

Questions often arise as to how a device attached to a transformer can draw power from the electrical power grid since it seems that the primary and secondary are not connected to one another. However, a closer look at how the primary and secondary are linked together magnetically and a consideration of the role of Lenz's law in this linkage may help to clear up this confusion.

The interface between primary care and pediatric cardiology.

PubMed

Gidding, S S; Rosenthal, A

1984-12-01

Pediatricians and family practitioners share responsibility with pediatric cardiologists for providing these patients with comprehensive medical services. This article serves as a resource for primary care physicians when questions concerning the care of children with heart disease arise. Considered are questions on growth, development, infectious disease, psychosocial issues, pharmacology, contraception and pregnancy, genetic counseling, school, travel, minor surgery, and financial considerations.

Emotions and Sensemaking: A Consideration of a Community College Presidential Transition

ERIC Educational Resources Information Center

Kearney, Kerri S.

2013-01-01

A change in primary leadership for a community college presents distinct challenges for its employees. The case study research reported in this article is based on emotions and sensemaking data that were collected at an urban community college in the midst of a presidential transition. Analysis of the data led to a primary focus on the period of…

Spectrum analysis on quality requirements consideration in software design documents.

PubMed

Kaiya, Haruhiko; Umemura, Masahiro; Ogata, Shinpei; Kaijiri, Kenji

2013-12-01

Software quality requirements defined in the requirements analysis stage should be implemented in the final products, such as source codes and system deployment. To guarantee this meta-requirement, quality requirements should be considered in the intermediate stages, such as the design stage or the architectural definition stage. We propose a novel method for checking whether quality requirements are considered in the design stage. In this method, a technique called "spectrum analysis for quality requirements" is applied not only to requirements specifications but also to design documents. The technique enables us to derive the spectrum of a document, and quality requirements considerations in the document are numerically represented in the spectrum. We can thus objectively identify whether the considerations of quality requirements in a requirements document are adapted to its design document. To validate the method, we applied it to commercial software systems with the help of a supporting tool, and we confirmed that the method worked well.

Design Considerations of a Transverse Flux Machine for Direct-Drive Wind Turbine Applications: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Husain, Tausif; Hasan, Iftekhar; Sozer, Yilmaz

This paper presents the design considerations of a double-sided transverse flux machine (TFM) for direct-drive wind turbine applications. The TFM has a modular structure with quasi-U stator cores and ring windings. The rotor is constructed with ferrite magnets in a flux-concentrating arrangement to achieve high air gap flux density. The design considerations for this TFM with respect to initial sizing, pole number selection, key design ratios, and pole shaping are presented in this paper. Pole number selection is critical in the design process of a TFM because it affects both the torque density and power factor under fixed magnetic andmore » changing electrical loading. Several key design ratios are introduced to facilitate the design procedure. The effect of pole shaping on back-emf and inductance is also analyzed. These investigations provide guidance toward the required design of a TFM for direct-drive applications. The analyses are carried out using analytical and three-dimensional finite element analysis. A prototype is under construction for experimental verification.« less

Design Considerations of a Transverse Flux Machine for Direct-Drive Wind Turbine Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Husain, Tausif; Hasan, Iftekhar; Sozer, Yilmaz

This paper presents the design considerations of a double-sided transverse flux machine (TFM) for direct-drive wind turbine applications. The TFM has a modular structure with quasi-U stator cores and ring windings. The rotor is constructed with ferrite magnets in a flux-concentrating arrangement to achieve high air gap flux density. The design considerations for this TFM with respect to initial sizing, pole number selection, key design ratios, and pole shaping are presented in this paper. Pole number selection is critical in the design process of a TFM because it affects both the torque density and power factor under fixed magnetic andmore » changing electrical loading. Several key design ratios are introduced to facilitate the design procedure. The effect of pole shaping on back-emf and inductance is also analyzed. These investigations provide guidance toward the required design of a TFM for direct-drive applications. The analyses are carried out using analytical and three-dimensional finite element analysis. A prototype is under construction for experimental verification.« less

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ARRANGEMENT Hull Structure § 116.340 Alternate design considerations. The Commanding Officer, Marine Safety... does not meet the requirements of § 116.300, if it is shown by systematic analysis based on engineering principles that the vessel structure provides adequate safety and strength. An owner seeking approval of an...

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... ARRANGEMENT Hull Structure § 116.340 Alternate design considerations. The Commanding Officer, Marine Safety... does not meet the requirements of § 116.300, if it is shown by systematic analysis based on engineering principles that the vessel structure provides adequate safety and strength. An owner seeking approval of an...

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... ARRANGEMENT Hull Structure § 116.340 Alternate design considerations. The Commanding Officer, Marine Safety... does not meet the requirements of § 116.300, if it is shown by systematic analysis based on engineering principles that the vessel structure provides adequate safety and strength. An owner seeking approval of an...

Instructional Design Considerations in Converting Non-CBT Materials into CBT Courses.

ERIC Educational Resources Information Center

Ng, Raymond

Instructional designers who are asked to convert existing training materials into computer-based training (CBT) must take special precautions to avoid making the product into a sophisticated page turner. Although conversion may save considerable time on subject research and analysis, courses to be delivered through microcomputers may require…

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Alternate design considerations. 116.340 Section 116.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150 PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS CONSTRUCTION AND ARRANGEMENT Hull Structure § 116.340 Alternate...

46 CFR 116.340 - Alternate design considerations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Alternate design considerations. 116.340 Section 116.340 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS CARRYING MORE THAN 150 PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS CONSTRUCTION AND ARRANGEMENT Hull Structure § 116.340 Alternate...

Human factors considerations in the design and evaluation of electronic flight bags (EFBs) : version 2

DOT National Transportation Integrated Search

2003-09-01

Electronic Flight Bags (EFBs) are coming into the flight deck, bringing along with them a wide range of human factors considerations. In order to understand and assess the full impact of an EFB, designers and evaluators require an understanding of ho...

Human factors considerations in the design and evaluation of electronic flight bags (EFBs), version 1 : basic functions

DOT National Transportation Integrated Search

2003-09-01

Electronic Flight Bags (EFBs) are coming into the flight deck, bringing along with them a wide range of human factors considerations. In order to understand and assess the full impact of an EFB, designers and evaluators require an understanding of ho...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schulz, H.

In the updating of the Guidelines for PWR`s of the {open_quotes}Reaktor-Sicherheitskommission{close_quotes} (RSK) in 1981 the requirements on the design have been changed with respect to the postulated leaks and breaks in the primary pressure boundary. The major change was a revision in the requirements for pipe whip protection. As a logical consequence of the {open_quotes}concept of basic safety{close_quotes} a guillotine type break or any other break type resulting in a large opening is not postulated any longer for the calculation of reaction and jet forces. As an upper limit for a leak an area of 0, 1 A (A =more » open cross section of the pipe) is postulated. This decision was based on a general assessment of the present PWR system design in Germany. Since then a number of piping systems have been requalified in the older nuclear power plants to comply with the break preclusion concept. Also a number of extensions of the concept have been developed to cover also leak-assumptions for branch pipes. Furthermore due considerations have been given to other aspects which could contribute to a leak development in the primary circuit, like vessel penetrations, manhole covers, flanges, etc. Now the break preclusion concept originally applied to the main piping has been developed into an integrated concept for the whole pressure boundary within the containment and will be applied also in the periodic safety review of present nuclear power plants.« less

Mars Surface Tunnel Element Concept

NASA Technical Reports Server (NTRS)

Rucker, Michelle A.; Jefferies, Sharon; Howe, A. Scott; Howard, Robert; Mary, Natalie; Watson, Judith; Lewis, Ruthan

2016-01-01

When the first human visitors on Mars prepare to return to Earth, they will have to comply with stringent planetary protection requirements. Apollo Program experience warns that opening an EVA hatch directly to the surface will bring dust into the ascent vehicle. To prevent inadvertent return of potential Martian contaminants to Earth, careful consideration must be given to the way in which crew ingress their Mars Ascent Vehicle (MAV). For architectures involving more than one surface element-such as an ascent vehicle and a pressurized rover or surface habitat-a retractable tunnel that eliminates extravehicular activity (EVA) ingress is an attractive solution. Beyond addressing the immediate MAV access issue, a reusable tunnel may be useful for other surface applications, such as rover to habitat transfer, once its primary mission is complete. A National Aeronautics and Space Administration (NASA) team is studying the optimal balance between surface tunnel functionality, mass, and stowed volume as part of the Evolvable Mars Campaign (EMC). The study team began by identifying the minimum set of functional requirements needed for the tunnel to perform its primary mission, as this would presumably be the simplest design, with the lowest mass and volume. This Minimum Functional Tunnel then becomes a baseline against which various tunnel design concepts and potential alternatives can be traded, and aids in assessing the mass penalty of increased functionality. Preliminary analysis indicates that the mass of a single-mission tunnel is about 237 kg, not including mass growth allowance.

Ethical conflicts and the process of reflection in undergraduate nursing students in Brazil.

PubMed

Ramos, Flávia Regina Souza; Brehmer, Laura Cavalcanti de Farias; Vargas, Mara Ambrosina; Trombetta, Ana Paula; Silveira, Luciana Ramos; Drago, Laila

2015-06-01

Nursing students on clinical placements as part of their professional training are routinely faced with situations involving ethical conflicts. The initial act of perceiving a situation as causing an ethical dilemma is the result of both the students' personal values, drawn from their culture and families, and of the professional knowledge and values that they have acquired through training and experience. Nursing students' experiences on clinical placements in primary care settings were investigated in order to identify situations that they perceived as involving ethical conflict and describe the elements they took into consideration during their decision-making processes in these situations. The research design was qualitative descriptive case study. Around 50 students from three different intakes to a nursing degree answered a questionnaire and discussed it in focus groups. The study was designed in accordance with the principles guiding research with human beings and was approved by the Human Research Ethics Committee. Synthesised into two principal axes: (a) ethical conflicts in primary care, linked with the domains of working processes, professional nursing ethics and human and social rights and (b) students' decision-making processes - realisation, reflection and intervention. The student nurses saw themselves both as actors and spectators in situations involving ethical problems and demanding moral deliberation, demonstrating the ability to base their arguments soundly. They tended to emphasise the possibilities offered by dialogue and that different ethical values must be respected to find fair solutions to ethical problems. © The Author(s) 2014.

The Efficacy and Safety of Shen Guo Lao Nian Granule for Common Cold of Qi-Deficiency Syndrome: Study Protocol for a Randomized, Double-Blind, Placebo-Controlled, Multicenter, Phase II Clinical Trial

PubMed Central

Fu, Juanjuan; Ding, Hong; Yang, Haimiao; Huang, Yuhong

2017-01-01

Background Common cold is one of the most frequently occurring illnesses in primary healthcare services and represents considerable disease burden. Common cold of Qi-deficiency syndrome (CCQDS) is an important but less addressed traditional Chinese medicine (TCM) pattern. We designed a protocol to explore the efficacy, safety, and optimal dose of Shen Guo Lao Nian Granule (SGLNG) for treating CCQDS. Methods/Design This is a multicenter, randomized, double-blind, placebo-controlled, phase II clinical trial. A total of 240 eligible patients will be recruited from five centers. Patients are randomly assigned to high-dose group, middle-dose group, low-dose group, or control group in a 1 : 1 : 1 : 1 ratio. All drugs are required to be taken 3 times daily for 5 days with a 5-day follow-up period. Primary outcomes are duration of all symptoms, total score reduction on Jackson's scale, and TCM symptoms scale. Secondary outcomes include every single TCM symptom duration and score reduction, TCM main symptoms disappearance rate, curative effects, and comparison between Jackson's scale and TCM symptom scale. Ethics and Trial Registration This study protocol was approved by the Ethics Committee of Clinical Trials and Biomedicine of West China Hospital of Sichuan University (number IRB-2014-12) and registered with the Chinese Clinical Trial Registry (ChiCTR-IPR-15006349). PMID:29430253