Facilitating telemedicine project sustainability in medically underserved areas: a healthcare provider participant perspective.

PubMed

Paul, David L; McDaniel, Reuben R

2016-04-26

Very few telemedicine projects in medically underserved areas have been sustained over time. This research furthers understanding of telemedicine service sustainability by examining teleconsultation projects from the perspective of healthcare providers. Drivers influencing healthcare providers' continued participation in teleconsultation projects and how projects can be designed to effectively and efficiently address these drivers is examined. Case studies of fourteen teleconsultation projects that were part of two health sciences center (HSC) based telemedicine networks was utilized. Semi-structured interviews of 60 key informants (clinicians, administrators, and IT professionals) involved in teleconsultation projects were the primary data collection method. Two key drivers influenced providers' continued participation. First was severe time constraints. Second was remote site healthcare providers' (RSHCPs) sense of professional isolation. Two design steps to address these were identified. One involved implementing relatively simple technology and process solutions to make participation convenient. The more critical and difficult design step focused on designing teleconsultation projects for collaborative, active learning. This learning empowered participating RSHCPs by leveraging HSC specialists' expertise. In order to increase sustainability the fundamental purpose of teleconsultation projects needs to be re-conceptualized. Doing so requires HSC specialists and RSHCPs to assume new roles and highlights the importance of trust. By implementing these design steps, healthcare delivery in medically underserved areas can be positively impacted.

Safety Belt Laws and Disparities in Safety Belt Use Among US High-School Drivers

PubMed Central

Winston, Flaura K.; Durbin, Dennis R.

2012-01-01

Objectives. We compared reported safety belt use, for both drivers and passengers, among teenagers with learner’s permits, provisional licenses, and unrestricted licenses in states with primary or secondary enforcement of safety belt laws. Methods. Our data source was the 2006 National Young Driver Survey, which included a national representative sample of 3126 high-school drivers. We used multivariate, log-linear regression analyses to assess associations between safety belt laws and belt use. Results. Teenaged drivers were 12% less likely to wear a safety belt as drivers and 15% less likely to wear one as passengers in states with a secondary safety belt law than in states with a primary law. The apparent reduction in belt use among teenagers as they progressed from learner to unrestricted license holder occurred in only secondary enforcement states. Groups reporting particularly low use included African American drivers, rural residents, academically challenged students, and those driving pickup trucks. Conclusions. The results provided further evidence for enactment of primary enforcement provisions in safety belt laws because primary laws are associated with higher safety belt use rates and lower crash-related injuries and mortality. PMID:22515851

Driver Behavior During Overtaking Maneuvers from the 100-Car Naturalistic Driving Study.

PubMed

Chen, Rong; Kusano, Kristofer D; Gabler, Hampton C

2015-01-01

Lane changes with the intention to overtake the vehicle in front are especially challenging scenarios for forward collision warning (FCW) designs. These overtaking maneuvers can occur at high relative vehicle speeds and often involve no brake and/or turn signal application. Therefore, overtaking presents the potential of erroneously triggering the FCW. A better understanding of driver behavior during lane change events can improve designs of this human-machine interface and increase driver acceptance of FCW. The objective of this study was to aid FCW design by characterizing driver behavior during lane change events using naturalistic driving study data. The analysis was based on data from the 100-Car Naturalistic Driving Study, collected by the Virginia Tech Transportation Institute. The 100-Car study contains approximately 1.2 million vehicle miles of driving and 43,000 h of data collected from 108 primary drivers. In order to identify overtaking maneuvers from a large sample of driving data, an algorithm to automatically identify overtaking events was developed. The lead vehicle and minimum time to collision (TTC) at the start of lane change events was identified using radar processing techniques developed in a previous study. The lane change identification algorithm was validated against video analysis, which manually identified 1,425 lane change events from approximately 126 full trips. Forty-five drivers with valid time series data were selected from the 100-Car study. From the sample of drivers, our algorithm identified 326,238 lane change events. A total of 90,639 lane change events were found to involve a closing lead vehicle. Lane change events were evenly distributed between left side and right side lane changes. The characterization of lane change frequency and minimum TTC was divided into 10 mph speed bins for vehicle travel speeds between 10 and 90 mph. For all lane change events with a closing lead vehicle, the results showed that drivers change lanes most frequently in the 40-50 mph speed range. Minimum TTC was found to increase with travel speed. The variability in minimum TTC between drivers also increased with travel speed. This study developed and validated an algorithm to detect lane change events in the 100-Car Naturalistic Driving Study and characterized lane change events in the database. The characterization of driver behavior in lane change events showed that driver lane change frequency and minimum TTC vary with travel speed. The characterization of overtaking maneuvers from this study will aid in improving the overall effectiveness of FCW systems by providing active safety system designers with further understanding of driver action in overtaking maneuvers, thereby increasing system warning accuracy, reducing erroneous warnings, and improving driver acceptance.

Automotive HMI design and participatory user involvement: review and perspectives.

PubMed

François, Mathilde; Osiurak, François; Fort, Alexandra; Crave, Philippe; Navarro, Jordan

2017-04-01

Automotive human-machine interface (HMI) design is facing new challenges due to the technological advances of the last decades. The design process has to be adapted in order to address human factors and road safety challenges. It is now widely accepted that user involvement in the HMI design process is valuable. However, the current form of user involvement in industry remains at the stages of concept assessment and usability tests. Moreover, the literature in other fields (e.g. information systems) promotes a broader user involvement with participatory design (i.e. the user is fully involved in the development process). This article reviews the established benefits of participatory design and reveals perspectives for automotive HMI quality improvement in a cognitive ergonomic framework. Practitioner Summary: Automotive HMI quality determines, in part, drivers' ability to perform primary driving tasks while using in-vehicle devices. User involvement in the design process is a key point to contribute to HMI quality. This article reports the potential benefits of a broad involvement from drivers to meet automotive HMI design challenges.

Spatial and temporal clonal evolution during development of metastatic urothelial carcinoma.

PubMed

Thomsen, Mathilde B H; Nordentoft, Iver; Lamy, Philippe; Høyer, Søren; Vang, Søren; Hedegaard, Jakob; Borre, Michael; Jensen, Jørgen B; Ørntoft, Torben F; Dyrskjøt, Lars

2016-11-01

Patients with metastatic bladder cancer have a median survival of only 13-14 months. Precision medicine using targeted therapy may improve survival. Here we investigated spatial and temporal tumour evolution and tumour heterogeneity in order to evaluate the potential use of targeted treatment of metastatic bladder cancer. We performed a proof-of-concept study by whole exome sequencing of multiple tumour regions (n = 22) from three patients with metastatic bladder cancer. DNA from primary and metastatic tumour biopsies was analysed for mutations using Mutect and potential therapeutic targets were identified. We identified 256, 265 and 378 somatic mutations per patient, encompassing mutations with an estimated functional impact in 6-12 known disease driver genes per patient. Disease driver mutations present in all tumour regions could be identified in all cases, however, over time metastasis specific driver mutations emerged. For each patient we identified 6-10 potentially therapeutic targets, however very few targets were present in all regions. Low mutational allele frequencies were observed in most regions suggesting a complex mixture of different cancer cells with no spatial demarcation of subclones. In conclusion, primary bladder tumours and metastatic lesions showed heterogeneity at the molecular level, but within the primary tumour the heterogeneity appeared low. The observed lack of potential therapeutic targets common to all cancer cells in primary tumours and metastases emphasizes the challenges in designing rational targeted therapy solely based on analysis of the primary tumours. Copyright © 2016 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.

Assessing older drivers: a primary care protocol to evaluate driving safety risk.

PubMed

Murden, Robert A; Unroe, Kathleen

2005-08-01

Most articles on elder drivers offer either general advice, or review testing protocols that divide drivers into two distinct groups: safe or unsafe. We believe it is unreasonable to expect any testing to fully separate drivers into just these two mutually exclusive groups, so we offer a protocol for a more practical approach. This protocol can be applied by primary care physicians. We review the justification for the many steps of this protocol, which have branches that lead to identifying drivers as low risk, high risk (for accidents) or needing further evaluation. Options for further evaluation are provided.

Vital Signs: Seat Belt Use Among Long-Haul Truck Drivers — United States, 2010

PubMed Central

Chen, Guang X.; Collins, James W.; Sieber, W. Karl; Pratt, Stephanie G.; Rodríguez-Acosta, Rosa L.; Lincoln, Jennifer E.; Birdsey, Jan; Hitchcock, Edward M.; Robinson, Cynthia F.

2015-01-01

Background Motor vehicle crashes were the leading cause of occupational fatalities in the United States in 2012, accounting for 25% of deaths. Truck drivers accounted for 46% of these deaths. This study estimates the prevalence of seat belt use and identifies factors associated with nonuse of seat belts among long-haul truck drivers (LHTDs), a group of workers at high risk for fatalities resulting from truck crashes. Methods CDC analyzed data from its 2010 national survey of LHTD health and injury. A total of 1,265 drivers completed the survey interview. Logistic regression was used to examine the association between seat belt nonuse and risk factors. Results An estimated 86.1% of LHTDs reported often using a seat belt, 7.8% used it sometimes, and 6.0% never. Reporting never using a belt was associated with often driving ≥10 mph (16 kph) over the speed limit (adjusted odds ratio [AOR] = 2.9), working for a company with no written safety program (AOR = 2.8), receiving two or more tickets for moving violations in the preceding 12 months (AOR = 2.2), living in a state without a primary belt law (AOR = 2.1); and being female (AOR = 2.3). Conclusions Approximately 14% of LHTDs are at increased risk for injury and death because they do not use a seat belt on every trip. Safety programs and other management interventions, engineering changes, and design changes might increase seat belt use among LHTDs. Implications for Public Health Primary state belt laws can help increase belt use among LHTDs. Manufacturers can use recently collected anthropometric data to design better-fitting and more comfortable seat belt systems. PMID:25742382

The prevalence of and factors associated with tobacco smoking behavior among long-distance drivers in Lagos, Nigeria.

PubMed

Ozoh, Obianuju B; Akanbi, Maxwell O; Amadi, Casmir E; Vollmer, William; Bruce, Nigel

2017-09-01

Factors associated with tobacco smoking are useful in designing tobacco control programs. To estimate the prevalence of and factors associated with tobacco smoking among long-distance drivers. This was a cross-sectional study. Stratified cluster sampling approach was used to select drivers based on if they received annual health screening (AHS) or not (non AHS). We used a structured questionnaire to obtain information and weighted the resulting observations to derive population based estimates. Association between tobacco smoking and socio-demographic factors was explored in multivariate models. 414 male drivers, mean age 43.6 (standard error 0.6) years. Population weighted prevalence of current smoking was 18.9% (95% CI: 14.3-23.4) of all drivers, 6.5% (95% CI: 2.6-10.4) of AHS drivers and 19.5 (95% CI: 14.7-24.2) of non AHS drivers (p<0.001). In multivariate models, having close friends that smoked (OR= 6.36, 95% CI= 2.49 - 16.20) cargo driving (OR= 2.58, 95% CI= 1.29 - 5.15) and lower education levels (OR for post-secondary education vs. primary education or less= 0.17, 95% CI= 0.04 - 0.81) were associated with current smoking. Prevalence of tobacco smoking is higher among non AHS compared to AHS drivers. Having close friends that smoked, cargo driving, and lower education levels were associated with current smoking.

Post-license education for novice drivers: evaluation of a training programme implemented in Spain.

PubMed

Molina, J Gabriel; Sanmartín, Jaime; Keskinen, Esko; Sanders, Nick

2007-01-01

This study evaluated the implementation of a second phase training program for novice drivers in Spain, which puts the primary focus of the training on the higher hierarchical levels of driver behavior. Two hundred and sixty-three participants took part throughout the study, which was implemented as an experimental design with the test and control groups assessed before and after the one day safety training. Measurement of the impact of the training program focused on the participants' self-evaluation and self-reporting of some driving behavior indicators related to accident risk. Data analysis showed a change in the expected direction in the scale related to the skills for careful driving, but not for the other four scales considered. A feedback survey about the training course offered some important input for evaluating the organization, contents, tuition, and results of the three parts of the training program (discussion group, on-road and track training) as reported by the participants in the test group. The results of the experiment show that using a one day driver safety course, it is possible to change some of the drivers' evaluations connected to safe driving style into safe direction. The follow-up period was exceptionally long (9 months) and the design (randomly divided experimental and control groups with before and after measurements) was reliable. More effort should be devoted to improving the on-road part of the training, which was often perceived as a typical driving lesson rather than a feedback drive. The findings suggest consideration of a mandatory 2nd phase driver training programme as a means to raise awareness of the full range of risks encountered by novice drivers, and as already introduced in 5 EU countries: Austria, Estonia, Finland, Luxembourg and Switzerland.

Framing Literacy Policy: Power and Policy Drivers in Primary Schools

ERIC Educational Resources Information Center

Mills, Colin

2011-01-01

This article is linked to the theme of the special issue through its focus on micropolitical analysis of the changing role of "policy drivers", mediating national policy through interactions with primary school heads and teachers. The central arguments draw on case studies undertaken in two primary schools where changes related to…

Driving performance and driver discomfort in an elevated and standard driving position during a driving simulation.

PubMed

Smith, Jordan; Mansfield, Neil; Gyi, Diane; Pagett, Mark; Bateman, Bob

2015-07-01

The primary purposes of a vehicle driver's seat, is to allow them to complete the driving task comfortably and safely. Within each class of vehicle (e.g. passenger, commercial, industrial, agricultural), there is an expected driving position to which a vehicle cabin is designed. This paper reports a study that compares two driving positions, in relation to Light Commercial Vehicles (LCVs), in terms of driver performance and driver discomfort. In the 'elevated' driving position, the seat is higher than usually used in road vehicles; this is compared to a standard driving position replicating the layout for a commercially available vehicle. It is shown that for a sample of 12 drivers, the elevated position did not, in general, show more discomfort than the standard position over a 60 min driving simulation, although discomfort increased with duration. There were no adverse effects shown for emergency stop reaction time or for driver headway for the elevated posture compared to the standard posture. The only body part that showed greater discomfort for the elevated posture compared to the standard posture was the right ankle. A second experiment confirmed that for 12 subjects, a higher pedal stiffness eliminated the ankle discomfort problem. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Single- and dual-task performance during on-the-road driving at a low and moderate dose of alcohol: A comparison between young novice and more experienced drivers.

PubMed

Jongen, Stefan; van der Sluiszen, Nick N J J M; Brown, Dennis; Vuurman, Eric F P M

2018-05-01

Driving experience and alcohol are two factors associated with a higher risk of crash involvement in young novice drivers. Driving a car is a complex task involving multiple tasks leading to dividing attention. The aim of this study was to compare the single and combined effects of a low and moderate dose of alcohol on single- and dual-task performance between young novice and more experienced young drivers during actual driving. Nine healthy novice drivers were compared with 9 more experienced drivers in a three-way, placebo-controlled, cross-over study design. Driving performance was measured in actual traffic, with standard deviation of lateral position as the primary outcome variable. Secondary task performance was measured with an auditory word learning test during driving. Results showed that standard deviation of lateral position increased dose-dependently at a blood alcohol concentration (BAC) of 0.2 and 0.5 g/L in both novice and experienced drivers. Secondary task performance was impaired in both groups at a BAC of 0.5 g/L. Furthermore, it was found that driving performance in novice drivers was already impaired at a BAC of 0.2 g/L during dual-task performance. The findings suggest that young inexperienced drivers are especially vulnerable to increased mental load while under the influence of alcohol. © 2018 The Authors Human Psychopharmacology: Clinical and Experimental Published by John Wiley & Sons Ltd.

Drivers of Rift Valley fever epidemics in Madagascar

PubMed Central

Lancelot, Renaud; Béral, Marina; Rakotoharinome, Vincent Michel; Andriamandimby, Soa-Fy; Héraud, Jean-Michel; Coste, Caroline; Apolloni, Andrea; Squarzoni-Diaw, Cécile; de La Rocque, Stéphane; Wint, G. R. William; Cardinale, Eric

2017-01-01

Rift Valley fever (RVF) is a vector-borne viral disease widespread in Africa. The primary cycle involves mosquitoes and wild and domestic ruminant hosts. Humans are usually contaminated after contact with infected ruminants. As many environmental, agricultural, epidemiological, and anthropogenic factors are implicated in RVF spread, the multidisciplinary One Health approach was needed to identify the drivers of RVF epidemics in Madagascar. We examined the environmental patterns associated with these epidemics, comparing human and ruminant serological data with environmental and cattle-trade data. In contrast to East Africa, environmental drivers did not trigger the epidemics: They only modulated local Rift Valley fever virus (RVFV) transmission in ruminants. Instead, RVFV was introduced through ruminant trade and subsequent movement of cattle between trade hubs caused its long-distance spread within the country. Contact with cattle brought in from infected districts was associated with higher infection risk in slaughterhouse workers. The finding that anthropogenic rather than environmental factors are the main drivers of RVF infection in humans can be used to design better prevention and early detection in the case of RVF resurgence in the region. PMID:28096420

Model for understanding consumer textural food choice.

PubMed

Jeltema, Melissa; Beckley, Jacqueline; Vahalik, Jennifer

2015-05-01

The current paradigm for developing products that will match the marketing messaging is flawed because the drivers of product choice and satisfaction based on texture are misunderstood. Qualitative research across 10 years has led to the thesis explored in this research that individuals have a preferred way to manipulate food in their mouths (i.e., mouth behavior) and that this behavior is a major driver of food choice, satisfaction, and the desire to repurchase. Texture, which is currently thought to be a major driver of product choice, is a secondary factor, and is important only in that it supports the primary driver-mouth behavior. A model for mouth behavior is proposed and the qualitative research supporting the identification of different mouth behaviors is presented. The development of a trademarked typing tool for characterizing mouth behavior is described along with quantitative substantiation of the tool's ability to group individuals by mouth behavior. The use of these four groups to understand textural preferences and the implications for a variety of areas including product design and weight management are explored.

The somatic mutation profiles of 2,433 breast cancers refines their genomic and transcriptomic landscapes

PubMed Central

Pereira, Bernard; Chin, Suet-Feung; Rueda, Oscar M.; Vollan, Hans-Kristian Moen; Provenzano, Elena; Bardwell, Helen A.; Pugh, Michelle; Jones, Linda; Russell, Roslin; Sammut, Stephen-John; Tsui, Dana W. Y.; Liu, Bin; Dawson, Sarah-Jane; Abraham, Jean; Northen, Helen; Peden, John F.; Mukherjee, Abhik; Turashvili, Gulisa; Green, Andrew R.; McKinney, Steve; Oloumi, Arusha; Shah, Sohrab; Rosenfeld, Nitzan; Murphy, Leigh; Bentley, David R.; Ellis, Ian O.; Purushotham, Arnie; Pinder, Sarah E.; Børresen-Dale, Anne-Lise; Earl, Helena M.; Pharoah, Paul D.; Ross, Mark T.; Aparicio, Samuel; Caldas, Carlos

2016-01-01

The genomic landscape of breast cancer is complex, and inter- and intra-tumour heterogeneity are important challenges in treating the disease. In this study, we sequence 173 genes in 2,433 primary breast tumours that have copy number aberration (CNA), gene expression and long-term clinical follow-up data. We identify 40 mutation-driver (Mut-driver) genes, and determine associations between mutations, driver CNA profiles, clinical-pathological parameters and survival. We assess the clonal states of Mut-driver mutations, and estimate levels of intra-tumour heterogeneity using mutant-allele fractions. Associations between PIK3CA mutations and reduced survival are identified in three subgroups of ER-positive cancer (defined by amplification of 17q23, 11q13–14 or 8q24). High levels of intra-tumour heterogeneity are in general associated with a worse outcome, but highly aggressive tumours with 11q13–14 amplification have low levels of intra-tumour heterogeneity. These results emphasize the importance of genome-based stratification of breast cancer, and have important implications for designing therapeutic strategies. PMID:27161491

Drivers of Rift Valley fever epidemics in Madagascar.

PubMed

Lancelot, Renaud; Béral, Marina; Rakotoharinome, Vincent Michel; Andriamandimby, Soa-Fy; Héraud, Jean-Michel; Coste, Caroline; Apolloni, Andrea; Squarzoni-Diaw, Cécile; de La Rocque, Stéphane; Formenty, Pierre B H; Bouyer, Jérémy; Wint, G R William; Cardinale, Eric

2017-01-31

Rift Valley fever (RVF) is a vector-borne viral disease widespread in Africa. The primary cycle involves mosquitoes and wild and domestic ruminant hosts. Humans are usually contaminated after contact with infected ruminants. As many environmental, agricultural, epidemiological, and anthropogenic factors are implicated in RVF spread, the multidisciplinary One Health approach was needed to identify the drivers of RVF epidemics in Madagascar. We examined the environmental patterns associated with these epidemics, comparing human and ruminant serological data with environmental and cattle-trade data. In contrast to East Africa, environmental drivers did not trigger the epidemics: They only modulated local Rift Valley fever virus (RVFV) transmission in ruminants. Instead, RVFV was introduced through ruminant trade and subsequent movement of cattle between trade hubs caused its long-distance spread within the country. Contact with cattle brought in from infected districts was associated with higher infection risk in slaughterhouse workers. The finding that anthropogenic rather than environmental factors are the main drivers of RVF infection in humans can be used to design better prevention and early detection in the case of RVF resurgence in the region.

Implementing managerial innovations in primary care: can we rank change drivers in complex adaptive organizations?

PubMed

Longo, Francesco

2007-01-01

There has been much innovation in primary care in the past few decades. Although external and systemic constraints for health care organizations are relevant for their managerial evolution, there is also evidence that organizations operating under the same external pressures reach different levels of maturity. Which of the internal drivers available explain and foster change? Is it possible to rank change drivers by looking at their rate of efficacy in order to define a general change management path in the relationship between managers and physicians? The study is a hypothesis-generating work, designed to discuss a framework, consistent with the complex adaptive systems literature, for more effective internal change management approaches. We employed a qualitative approach to conduct a multiple case study in order to directly observe the evidence and to ask "key change players" for their perceptions. We studied different organizations all subject to the same external constraints in order to focus on the effects of internal change drivers. According to key players' opinions, the main drivers for managerial development are characteristics of the actors involved: their motivation, leadership, and commitment; the quality of relationships among the main actors; and how the resources dedicated to manage change are used. Given these criteria, any organizational strategy and goal seems to be achievable. This is consistent with the suggestions coming from the complex adaptive system literature. MANAGERIAL IMPLICATIONS: Managers have to consider the management of the relationship with professionals as the key success factor for implementing change. Managerial leadership has to be diffused in the organization both in the vertical and horizontal dimensions. Innovations need a medium or long-term perspective to become widely applied, and this requires a strong commitment which is related to managerial stability. Resources for innovation are to be considered a critical driver for fostering the relationship between managers and professionals.

Initial Results of Accelerated Stress Testing on Single-Channel and Multichannel Drivers: Solid-State Lighting Technology Area

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This report is the first in a series of studies on accelerated stress testing (AST) of drivers used for SSL luminaires, such as downlights, troffers, and streetlights. A representative group of two-stage commercial driver products was exposed to an AST environment consisting of 75°C and 75% relative humidity (7575). These drivers were a mix of single-channel drivers (i.e., a single output current for one LED primary) and multichannel drivers (i.e., separate output currents for multiple LED primaries). This AST environment was chosen because previous testing on downlights with integrated drivers demonstrated that 38% of the sample population failed in lessmore » than 2,500 hours of testing using this method. In addition to AST test results, the performance of an SSL downlight product incorporating an integrated, multichannel driver during extended room temperature operational life (RTOL) testing is also reported. A battery of measurements was used to evaluate these products during accelerated testing, including full electrical characterization (i.e., power consumption, PF, total harmonic distortion [THD], and inrush current) and photometric characterization of external LED loads attached to the drivers (i.e., flicker performance and lumen maintenance).« less

Global-change drivers of ecosystem functioning modulated by natural variability and saturating responses.

PubMed

Flombaum, Pedro; Yahdjian, Laura; Sala, Osvaldo E

2017-02-01

Humans are altering global environment at an unprecedented rate through changes in biodiversity, climate, nitrogen cycle, and land use. To address their effects on ecosystem functioning, experiments most frequently explore one driver at a time and control as many confounding factors as possible. Yet, which driver exerts the largest influence on ecosystem functioning and whether their relative importance changes among systems remain unclear. We analyzed experiments in the Patagonian steppe that evaluated the aboveground net primary production (ANPP) response to manipulated gradients of species richness, precipitation, temperature, nitrogen fertilization (N), and grazing intensity. We compared the effect on ANPP relative to ambient conditions considering intensity and direction of manipulations for each driver. The ranking of responses to drivers with comparable manipulation intensity was as follows: biodiversity>grazing>precipitation>N. For a similar intensity of manipulation, the effect of biodiversity loss was 4.0, 3.6, and 1.5, times larger than N deposition, decreased precipitation, and increased grazing intensity. We interpreted our results considering two hypotheses. First, the response of ANPP to changes in precipitation and biodiversity is saturating, so we expected larger effects when the driver was reduced, relative to ambient conditions, than when it was increased. Experimental manipulations that reduced ambient levels had larger effects than those that increased them. Second, the sensitivity of ANPP to each driver is inversely related to the natural variability of the driver. In Patagonia, the ranking of natural variability of drivers is as follows: precipitation>grazing>temperature>biodiversity>N. So, in general, the ecosystem was most sensitive to drivers that varied the least. Comparable results from Cedar Creek (MN) support both hypotheses and suggest that sensitivity to drivers varies among ecosystem types. Given the importance of understanding ecosystem sensitivity to predict global-change impacts, it is necessary to design new experiments located in regions with contrasting natural variability and that include the full range of drivers. © 2016 John Wiley & Sons Ltd.

A Study of Truck Drivers and Their Job Performance Regarding Highway Safety

ERIC Educational Resources Information Center

Nafukho, Fredrick M.; Hinton, Barbara E.; Graham, Carroll M.

2007-01-01

Limited research has addressed the issue of truck drivers and their performance regarding highway safety in terms of reduced number of crashes per driver. The primary purpose of this study was to determine how tractor trailer truck drivers' job performance could be improved while at the same time ensuring increased revenue for the transportation…

Toward best practice in Human Machine Interface design for older drivers: A review of current design guidelines.

PubMed

Young, K L; Koppel, S; Charlton, J L

2017-09-01

Older adults are the fastest growing segment of the driving population. While there is a strong emphasis for older people to maintain their mobility, the safety of older drivers is a serious community concern. Frailty and declines in a range of age-related sensory, cognitive, and physical impairments can place older drivers at an increased risk of crash-related injuries and death. A number of studies have indicated that in-vehicle technologies such as Advanced Driver Assistance Systems (ADAS) and In-Vehicle Information Systems (IVIS) may provide assistance to older drivers. However, these technologies will only benefit older drivers if their design is congruent with the complex needs and diverse abilities of this driving cohort. The design of ADAS and IVIS is largely informed by automotive Human Machine Interface (HMI) guidelines. However, it is unclear to what extent the declining sensory, cognitive and physical capabilities of older drivers are addressed in the current guidelines. This paper provides a review of key current design guidelines for IVIS and ADAS with respect to the extent they address age-related changes in functional capacities. The review revealed that most of the HMI guidelines do not address design issues related to older driver impairments. In fact, in many guidelines driver age and sensory cognitive and physical impairments are not mentioned at all and where reference is made, it is typically very broad. Prescriptive advice on how to actually design a system so that it addresses the needs and limitations of older drivers is not provided. In order for older drivers to reap the full benefits that in-vehicle technology can afford, it is critical that further work establish how older driver limitations and capabilities can be supported by the system design process, including their inclusion into HMI design guidelines. Copyright © 2016 Elsevier Ltd. All rights reserved.

Space Shuttle Orbiter Reaction Jet Driver (RJD): Independent Technical Assessment/Inspection (ITA/I) Report, Version 1.0

NASA Technical Reports Server (NTRS)

Gilbrech, Richard J.; Kichak, Robert A.; Davis, Mitchell; Williams, Glenn; Thomas, Walter, III; Slenski, George A.; Hetzel, Mark

2005-01-01

The Space Shuttle Program (SSP) has a zero-fault-tolerant design related to an inadvertent firing of the primary reaction control jets on the Orbiter during mated operations with the International Space Station (ISS). Failure modes identified by the program as a wire-to-wire "smart" short or a Darlington transistor short resulting in a failed-on primary thruster during mated operations with ISS can drive forces that exceed the structural capabilities of the docked Shuttle/ISS structure. The assessment team delivered 17 observations, 6 findings and 15 recommendations to the Space Shuttle Program.

U.S. truck driver anthropometric study and multivariate anthropometric models for cab designs.

PubMed

Guan, Jinhua; Hsiao, Hongwei; Bradtmiller, Bruce; Kau, Tsui-Ying; Reed, Matthew R; Jahns, Steven K; Loczi, Josef; Hardee, H Lenora; Piamonte, Dominic Paul T

2012-10-01

This study presents data from a large-scale anthropometric study of U.S. truck drivers and the multivariate anthropometric models developed for the design of next-generation truck cabs. Up-to-date anthropometric information of the U.S. truck driver population is needed for the design of safe and ergonomically efficient truck cabs. We collected 35 anthropometric dimensions for 1,950 truck drivers (1,779 males and 171 females) across the continental United States using a sampling plan designed to capture the appropriate ethnic, gender, and age distributions of the truck driver population. Truck drivers are heavier than the U.S.general population, with a difference in mean body weight of 13.5 kg for males and 15.4 kg for females. They are also different in physique from the U.S. general population. In addition, the current truck drivers are heavier and different in physique compared to their counterparts of 25 to 30 years ago. The data obtained in this study provide more accurate anthropometric information for cab designs than do the current U.S. general population data or truck driver data collected 25 to 30 years ago. Multivariate anthropometric models, spanning 95% of the current truck driver population on the basis of a set of 12 anthropometric measurements, have been developed to facilitate future cab designs. The up-to-date truck driver anthropometric data and multivariate anthropometric models will benefit the design of future truck cabs which, in turn, will help promote the safety and health of the U.S. truck drivers.

Lane change warning threshold based on driver perception characteristics.

PubMed

Wang, Chang; Sun, Qinyu; Fu, Rui; Li, Zhen; Zhang, Qiong

2018-08-01

Lane Change Warning system (LCW) is exploited to alleviate driver workload and improve the safety performance of lane changes. Depending on the secure threshold, the lane change warning system could transmit caution to drivers. Although the system possesses substantial benefits, it may perturb the conventional operating of the driver and affect driver judgment if the warning threshold does not conform to the driver perception of safety. Therefore, it is essential to establish an appropriate warning threshold to enhance the accuracy rate and acceptability of the lane change warning system. This research aims to identify the threshold that conforms to the driver perception of the ability to safely change lanes with a rear vehicle fast approaching. We propose a theoretical warning model of lane change based on a safe minimum distance and deceleration of the rear vehicle. For the purpose of acquiring the different safety levels of lane changes, 30 licensed drivers are recruited and we obtain the extreme moments represented by driver perception characteristics from a Front Extremity Test and a Rear Extremity Test implemented on the freeway. The required deceleration of the rear vehicle corresponding to the extreme time is calculated according to the proposed model. In light of discrepancies in the deceleration in these extremity experiments, we determine two levels of a hierarchical warning system. The purpose of the primary warning is to remind drivers of the existence of potentially dangerous vehicles and the second warning is used to warn the driver to stop changing lanes immediately. We use the signal detection theory to analyze the data. Ultimately, we confirm that the first deceleration threshold is 1.5 m/s 2 and the second deceleration threshold is 2.7 m/s 2 . The findings provide the basis for the algorithm design of LCW and enhance the acceptability of the intelligent system. Copyright © 2018 Elsevier Ltd. All rights reserved.

For the Benefit of Others: Reasons Why Women with Breast Cancer Participate in RCTs.

PubMed

Jenkins, Valerie A; Fallowfield, Lesley J

2015-04-01

Appreciation of the barriers and drivers affecting enrolment in randomised clinical trials (RCTs) is important for future trial design, communication and information provision. As part of an intervention to facilitate UK multidisciplinary team communication about RCTs, women with breast cancer who discussed trials with doctors or research nurses completed questionnaires examining i) clarity of trial information and ii) reasons for their trial decision. 152 women completed the questionnaires; 113/152 (74%) consented to RCT enrolment. Patients' satisfaction with communication about the trial information was very good, irrespective of participation decisions. Acceptors' and decliners' responses to 9/16 statements concerning decisions about trial participation differed significantly. 'Wanting to help with doctor's research' influenced 100% acceptors compared to 57% of decliners (p < 0.001). Decliners were more likely to be 'worried about randomisation' (20 vs. 39%; p < 0.035) and to 'want doctor to choose treatment rather than be randomised' (31 vs. 53%; p < 0.031). Primary reason for trial acceptance was altruism; 'I feel that others with my illness will benefit from the results of the trial', 58/108 (54%). A majority of women accepted RCT entry citing altruistic motivations as the primary driver for participation. Trial design and setting (metastatic or adjuvant) had little impact on participation.

Do Restricted Driver's Licenses Lower Crash Risk among Older Drivers? A Survival Analysis of Insurance Data from British Columbia

ERIC Educational Resources Information Center

Nasvadi, Glenyth Caragata; Wister, Andrew

2009-01-01

Purpose: Faced with an aging driving population, interest is increasing in the use of restricted licenses or "graduated delicensing" for older drivers to allow them to safely retain a driver's license. The primary purpose of this study was to determine whether restricted licenses are successful at mitigating number of crashes per year…

A comparison of alcohol involvement in exposed and injured drivers, phases I and II

DOT National Transportation Integrated Search

1976-02-01

Author's abstract: The primary objective of the study was to compare alcohol related data collected from drivers involved in injury producing automobile accidents with the same type of data collected from drivers who were similarly exposed to these m...

Improved assessment of gross and net primary productivity of Canada's landmass

NASA Astrophysics Data System (ADS)

Gonsamo, Alemu; Chen, Jing M.; Price, David T.; Kurz, Werner A.; Liu, Jane; Boisvenue, Céline; Hember, Robbie A.; Wu, Chaoyang; Chang, Kuo-Hsien

2013-12-01

assess Canada's gross primary productivity (GPP) and net primary productivity (NPP) using boreal ecosystem productivity simulator (BEPS) at 250 m spatial resolution with improved input parameter and driver fields and phenology and nutrient release parameterization schemes. BEPS is a process-based two-leaf enzyme kinetic terrestrial ecosystem model designed to simulate energy, water, and carbon (C) fluxes using spatial data sets of meteorology, remotely sensed land surface variables, soil properties, and photosynthesis and respiration rate parameters. Two improved key land surface variables, leaf area index (LAI) and land cover type, are derived at 250 m from Moderate Resolution Imaging Spectroradiometer sensor. For diagnostic error assessment, we use nine forest flux tower sites where all measured C flux, meteorology, and ancillary data sets are available. The errors due to input drivers and parameters are then independently corrected for Canada-wide GPP and NPP simulations. The optimized LAI use, for example, reduced the absolute bias in GPP from 20.7% to 1.1% for hourly BEPS simulations. Following the error diagnostics and corrections, daily GPP and NPP are simulated over Canada at 250 m spatial resolution, the highest resolution simulation yet for the country or any other comparable region. Total NPP (GPP) for Canada's land area was 1.27 (2.68) Pg C for 2008, with forests contributing 1.02 (2.2) Pg C. The annual comparisons between measured and simulated GPP show that the mean differences are not statistically significant (p > 0.05, paired t test). The main BEPS simulation error sources are from the driver fields.

Drivers and Blockers: Embedding Education for Sustainability (EfS) in Primary Teacher Education

ERIC Educational Resources Information Center

Wilson, Sue

2012-01-01

The growing emphasis on sustainability in school curricula in Australia reflects international trends in education. Teacher education is a vital strategy for the incorporation of Education for Sustainability (EfS) in school curricula. Research to identify drivers and barriers to embedding EfS across a primary teacher education program in an…

Longitudinal Research on Aging Drivers (LongROAD): study design and methods.

PubMed

Li, Guohua; Eby, David W; Santos, Robert; Mielenz, Thelma J; Molnar, Lisa J; Strogatz, David; Betz, Marian E; DiGuiseppi, Carolyn; Ryan, Lindsay H; Jones, Vanya; Pitts, Samantha I; Hill, Linda L; DiMaggio, Charles J; LeBlanc, David; Andrews, Howard F

2017-12-01

As an important indicator of mobility, driving confers a host of social and health benefits to older adults. Despite the importance of safe mobility as the population ages, longitudinal data are lacking about the natural history and determinants of driving safety in older adults. The Longitudinal Research on Aging Drivers (LongROAD) project is a multisite prospective cohort study designed to generate empirical data for understanding the role of medical, behavioral, environmental and technological factors in driving safety during the process of aging. A total of 2990 active drivers aged 65-79 years at baseline have been recruited through primary care clinics or health care systems in five study sites located in California, Colorado, Maryland, Michigan, and New York. Consented participants were assessed at baseline with standardized research protocols and instruments, including vehicle inspection, functional performance tests, and "brown-bag review" of medications. The primary vehicle of each participant was instrumented with a small data collection device that records detailed driving data whenever the vehicle is operating and detects when a participant is driving. Annual follow-up is being conducted for up to three years with a telephone questionnaire at 12 and 36 months and in-person assessment at 24 months. Medical records are reviewed annually to collect information on clinical diagnoses and healthcare utilization. Driving records, including crashes and violations, are collected annually from state motor vehicle departments. Pilot testing was conducted on 56 volunteers during March-May 2015. Recruitment and enrollment were completed between July 2015 and March 2017. Results of the LongROAD project will generate much-needed evidence for formulating public policy and developing intervention programs to maintain safe mobility while ensuring well-being for older adults.

Drivers within natural drinking groups: an exploration of role selection, motivation, and group influence on driver sobriety.

PubMed

Lange, James E; Johnson, Mark B; Reed, Mark B

2006-01-01

Young people consume alcohol almost exclusively in social contexts, but natural drinking group dynamics are poorly understood. Our research focuses on the drivers' role within natural drinking groups. We conducted breath-test surveys of existing groups of young people at the US/Mexico border crossing before they headed to Tijuana bars, and surveyed them again upon their return. Results indicated an individual's perception of other group member's drinking plans predicts drinking intentions to a greater degree for passengers than drivers. Additionally, drivers who anticipated heavy drinking among other group members returned to the United States with BACs nearly identical to drivers who reported that other group members would not drink at all. This suggests drivers were resistant to normative pressures to drink. Evidence that group-dynamic variables may impact drinking behavior underscores the importance of systematic exploration of natural drinking groups. Furthermore, the knowledge gleaned from studying the dynamics and decision making processes of natural drinking groups could be used to design intervention designed to increase designated driver use and to reduce drinking among designated drivers.

Lunar hand tools

NASA Technical Reports Server (NTRS)

Bentz, Karl F.; Coleman, Robert D.; Dubnik, Kathy; Marshall, William S.; Mcentee, Amy; Na, Sae H.; Patton, Scott G.; West, Michael C.

1987-01-01

Tools useful for operations and maintenance tasks on the lunar surface were determined and designed. Primary constraints are the lunar environment, the astronaut's space suit and the strength limits of the astronaut on the moon. A multipurpose rotary motion tool and a collapsible tool carrier were designed. For the rotary tool, a brushless motor and controls were specified, a material for the housing was chosen, bearings and lubrication were recommended and a planetary reduction gear attachment was designed. The tool carrier was designed primarily for ease of access to the tools and fasteners. A material was selected and structural analysis was performed on the carrier. Recommendations were made about the limitations of human performance and about possible attachments to the torque driver.

MESA - A new approach to low cost scientific spacecraft

NASA Astrophysics Data System (ADS)

Keyes, G. W.; Case, C. M.

1982-09-01

Today, the greatest obstacle to science and exploration in space is its cost. The present investigation is concerned with approaches for reducing this cost. Trends in the scientific spacecraft market are examined, and a description is presented for the MESA space platform concept. The cost drivers are considered, taking into account planning, technical aspects, and business factors. It is pointed out that the primary function of the MESA concept is to provide a satellite system at the lowest possible price. In order to reach this goal an attempt is made to benefit from all of the considered cost drivers. It is to be tried to work with the customer early in the mission analysis stage in order to assist in finding the right compromise between mission cost and return. A three phase contractual arrangement is recommended for MESA platforms. The phases are related to mission feasibility, specification definition, and design and development. Modular kit design promotes flexibility at low cost.

Bridgeless SEPIC PFC Converter for Multistring LED Driver

NASA Astrophysics Data System (ADS)

Jha, Aman; Singh, Bhim

2018-05-01

This paper deals with Power Factor Correction (PFC) in Low Voltage High Current (LVHC) multi-string light emitting diode (LED) using a bridgeless (BL) single ended primary inductance converter (SEPIC). This application is designed for large area LED lighting with illumination control. A multi-mode LED dimming technique is used for the lighting control. The BL-SEPIC PFC converter is used as a load emulator for high power factor. The regulated low voltage from flyback converter is a source power to the synchronous buck converters for multi-string LED driver and forced cooling system for LED junction. The BL-SEPIC PFC converter inductor design is based on Discontinuous Inductor Current Modes (DICM) which provides good PFC at low cost. Test results are found quite satisfactory for universal input AC (90-265 V). There is significant improvement in the power factor and input current Total Harmonic Distortion (THD) with good margin of harmonic limits for lighting IEC 61000-3-2 Class C.

Parametric Cost Models for Space Telescopes

NASA Technical Reports Server (NTRS)

Stahl, H. Philip; Henrichs, Todd; Dollinger, Courtney

2010-01-01

Multivariable parametric cost models for space telescopes provide several benefits to designers and space system project managers. They identify major architectural cost drivers and allow high-level design trades. They enable cost-benefit analysis for technology development investment. And, they provide a basis for estimating total project cost. A survey of historical models found that there is no definitive space telescope cost model. In fact, published models vary greatly [1]. Thus, there is a need for parametric space telescopes cost models. An effort is underway to develop single variable [2] and multi-variable [3] parametric space telescope cost models based on the latest available data and applying rigorous analytical techniques. Specific cost estimating relationships (CERs) have been developed which show that aperture diameter is the primary cost driver for large space telescopes; technology development as a function of time reduces cost at the rate of 50% per 17 years; it costs less per square meter of collecting aperture to build a large telescope than a small telescope; and increasing mass reduces cost.

Armillaria species: Primary drivers of forest ecosystem processes and potential impacts of climate change

Treesearch

Ned B. Klopfenstein; Mee-Sook Kim; John W. Hanna; Amy L. Ross-Davis; Sara M. Ashiglar; Geral I. McDonald

2012-01-01

Species of the fungal genus Armillaria are pervasive in forest soils and are associated with widely ranging tree species of diverse forests worldwide (Baumgartner et al., 2011). As primary decay drivers of ecosystem processes, Armillaria species exhibit diverse ecological behaviors, ranging from virulent root and/or butt pathogens of diverse woody hosts, such as timber...

Refueling Behavior of Flexible Fuel Vehicle Drivers in the Federal Fleet

DOE Office of Scientific and Technical Information (OSTI.GOV)

Daley, R.; Nangle, J.; Boeckman, G.

2014-05-01

Federal fleets are a frequent subject of legislative and executive efforts to lead a national transition to alternative fuels and advanced vehicle technologies. Section 701 of the Energy Policy Act of 2005 requires that all dual-fueled alternative fuel vehicles in the federal fleet be operated on alternative fuel 100% of the time when they have access to it. However, in Fiscal Year (FY) 2012, drivers of federal flex fuel vehicles (FFV) leased through the General Services Administration refueled with E85 24% of the time when it was available--falling well short of the mandate. The U.S. Department of Energy's National Renewablemore » Energy Laboratory completed a 2-year Laboratory Directed Research and Development project to identify the factors that influence the refueling behavior of federal FFV drivers. The project began with two primary hypotheses. First, information scarcity increases the tendency to miss opportunities to purchase E85. Second, even with perfect information, there are limits to how far drivers will go out of their way to purchase E85. This paper discusses the results of the project, which included a June 2012 survey of federal fleet drivers and an empirical analysis of actual refueling behavior from FY 2009 to 2012. This research will aid in the design and implementation of intervention programs aimed at increasing alternative fuel use and reducing petroleum consumption.« less

Preface to the special section on human factors and automation in vehicles: designing highly automated vehicles with the driver in mind.

PubMed

Merat, Natasha; Lee, John D

2012-10-01

This special section brings together diverse research regarding driver interaction with advanced automotive technology to guide design of increasingly automated vehicles. Rapidly evolving vehicle automation will likely change cars and trucks more in the next 5 years than the preceding 50, radically redefining what it means to drive. This special section includes 10 articles from European and North American researchers reporting simulator and naturalistic driving studies. Little research has considered the consequences of fully automated driving, with most focusing on lane-keeping and speed control systems individually. The studies reveal two underlying design philosophies: automate driving versus support driving. Results of several studies, consistent with previous research in other domains, suggest that the automate philosophy can delay driver responses to incidents in which the driver has to intervene and take control from the automation. Understanding how to orchestrate the transfer or sharing of control between the system and the driver, particularly in critical incidents, emerges as a central challenge. Designers should not assume that automation can substitute seamlessly for a human driver, nor can they assume that the driver can safely accommodate the limitations of automation. Designers, policy makers, and researchers must give careful consideration to what role the person should have in highly automated vehicles and how to support the driver if the driver is to be responsible for vehicle control. As in other domains, driving safety increasingly depends on the combined performance of the human and automation, and successful designs will depend on recognizing and supporting the new roles of the driver.

Development of Accomodation Models for Soldiers in Vehicles: Driver

DTIC Science & Technology

2014-09-01

human needs and performance. A small section of this standard addresses the design of vehicle seats and the layout of the driver workstation...drivers and passengers (squad). The study was designed to focus on tactical vehicle (truck) designs with fixed driver heel points and H30 values...fore-aft and vertically, along with adjusting the seat back angle, to obtain a comfortable driving position. The Soldier’s posture and seat adjustments

76 FR 76481 - Denial of Motor Vehicle Defect Petition

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-07

... the driver of a model year (MY) 2005 Honda Accord Hybrid (subject vehicle), VIN JHMCN36425C005487... incident. (6) Mr. Saroop (the petitioner's husband) was the primary driver of the subject vehicle prior to... to the accident scene. The driver and passenger in Vehicle 1 were unconscious and unresponsive. The...

Genome-wide methylation sequencing of paired primary and metastatic cell lines identifies common DNA methylation changes and a role for EBF3 as a candidate epigenetic driver of melanoma metastasis

PubMed Central

Chatterjee, Aniruddha; Stockwell, Peter A; Ahn, Antonio; Rodger, Euan J; Leichter, Anna L; Eccles, Michael R

2017-01-01

Epigenetic alterations are increasingly implicated in metastasis, whereas very few genetic mutations have been identified as authentic drivers of cancer metastasis. Yet, to date, few studies have identified metastasis-related epigenetic drivers, in part because a framework for identifying driver epigenetic changes in metastasis has not been established. Using reduced representation bisulfite sequencing (RRBS), we mapped genome-wide DNA methylation patterns in three cutaneous primary and metastatic melanoma cell line pairs to identify metastasis-related epigenetic drivers. Globally, metastatic melanoma cell lines were hypomethylated compared to the matched primary melanoma cell lines. Using whole genome RRBS we identified 75 shared (10 hyper- and 65 hypomethylated) differentially methylated fragments (DMFs), which were associated with 68 genes showing significant methylation differences. One gene, Early B Cell Factor 3 (EBF3), exhibited promoter hypermethylation in metastatic cell lines, and was validated with bisulfite sequencing and in two publicly available independent melanoma cohorts (n = 40 and 458 melanomas, respectively). We found that hypermethylation of the EBF3 promoter was associated with increased EBF3 mRNA levels in metastatic melanomas and subsequent inhibition of DNA methylation reduced EBF3 expression. RNAi-mediated knockdown of EBF3 mRNA levels decreased proliferation, migration and invasion in primary and metastatic melanoma cell lines. Overall, we have identified numerous epigenetic changes characterising metastatic melanoma cell lines, including EBF3-induced aggressive phenotypic behaviour with elevated EBF3 expression in metastatic melanoma, suggesting that EBF3 promoter hypermethylation may be a candidate epigenetic driver of metastasis. PMID:28030832

An Analysis of a Contingency Program on Designated Drivers at a College Bar

ERIC Educational Resources Information Center

Kazbour, Richard R.; Bailey, Jon S.

2010-01-01

The present study evaluated the effects of prompts and incentives on designated drivers in a bar. We defined the dependent variable as the percentage of customers either functioning as or riding with a designated driver. We used an ABCA design to evaluate the effectiveness of prompts and incentives on the dependent variable. Results indicated that…

Who actually receives cell phone use while driving citations and how much are these laws enforced among states? A descriptive, cross-sectional study

PubMed Central

Rudisill, Toni M; Zhu, Motao

2016-01-01

Objectives While numerous cell phone use while driving laws have been passed among states, little information exists regarding who gets cited for these traffic infractions and how much these laws are enforced at the state-level within the USA. Design Cross-sectional, descriptive study. Setting 14 states and the District of Columbia. Participants Those receiving cell phone use while driving citations within included states from 2007 to 2013. Primary outcome Demographic characteristics of cited drivers were assessed. Rates of infractions per 100 000 licensed in-state drivers per year for various cell phone use while driving violations were calculated. Results Drivers were cited for hand-held use violations (n=2.5 million) more than texting (n=14 682) or young driver all cell phone bans (n=342). Among states that provided data for all traffic violations, cell phone use while driving citations comprised 1% of all written citations. Regardless of ban type, males (68.2%) were cited more frequently than females. Drivers 25–64 years of age (90.8%) were more likely to be cited for hand-held phone use. The average yearly rate of infractions per 100 000 licensed in-state drivers from 2010–2013 was 5.8 for texting bans, 2607 for hand-held bans, and 9954 for any traffic violation. Conclusions Among cited drivers, age and sex differences existed by the type of ban violated. State-level enforcement appeared sparse. Due to the potential serious consequences of cell phone use while driving in the USA, more enforcement and targeted public safety campaigns are likely needed. PMID:27301485

The Alabama VIP older driver study rationale and design: examining the relationship between vision impairment and driving using naturalistic driving techniques.

PubMed

Owsley, Cynthia; McGwin, Gerald; Antin, Jonathan F; Wood, Joanne M; Elgin, Jennifer

2018-02-07

Older drivers aged ≥70 years old have among the highest rates of motor vehicle collisions (MVC) compared to other age groups. Driving is a highly visual task, and older adults have a high prevalence of vision impairment compared to other ages. Most studies addressing visual risk factors for MVCs by older drivers utilize vehicle accident reports as the primary outcome, an approach with several methodological limitations. Naturalistic driving research methods overcome these challenges and involve installing a high-tech, unobtrusive data acquisition system (DAS) in an older driver's own vehicle. The DAS continuously records multi-channel video of driver and roadway, sensor-based kinematics, GPS location, and presence of nearby objects in front of the vehicle, providing an objective measure of driving exposure. In this naturalistic driving study, the purpose is to examine the relationship between vision and crashes and near-crashes, lane-keeping, turning at intersections, driving performance during secondary tasks demands, and the role of front-seat passengers. An additional aim is to compare results of the on-road driving evaluation by a certified driving rehabilitation specialist to objective indicators of driving performance derived from the naturalistic data. Drivers ≥70 years old are recruited from ophthalmology clinics and a previous population-based study of older drivers, with the goal of recruiting persons with wide ranging visual function. Target samples size is 195 drivers. At a baseline visit, the DAS is installed in the participant's vehicle and a battery of health and functional assessments are administered to the driver including visual-sensory and visual-cognitive tests. The DAS remains installed in the vehicle for six months while the participant goes about his/her normal driving with no imposed study restrictions. After six months, the driver returns for DAS de-installation, repeat vision testing, and an on-road driving evaluation by a certified driving rehabilitation specialist (CDRS). The data streams recorded by the DAS are uploaded to the data coordinating center for analysis. The Alabama VIP Older Driver Study is the first naturalistic older driver study specifically focused on the enrollment of drivers with vision impairment in order to study the relationship between visual dysfunction and driver safety and performance.

Earth Entry Vehicle Design for Sample Return Missions Using M-SAPE

NASA Technical Reports Server (NTRS)

Samareh, Jamshid

2015-01-01

Most mission concepts that return sample material to Earth share one common element: an Earth entry vehicle (EEV). The primary focus of this paper is the examination of EEV design space for relevant sample return missions. Mission requirements for EEV concepts can be divided into three major groups: entry conditions (e.g., velocity and flight path angle), payload (e.g., mass, volume, and g-load limit), and vehicle characteristics (e.g., thermal protection system, structural topology, and landing concepts). The impacts of these requirements on the EEV design have been studied with an integrated system analysis tool, and the results will be discussed in details. In addition, through sensitivities analyses, critical design drivers that have been identified will be reviewed.

Structural cost optimization of photovoltaic central power station modules and support structure

NASA Technical Reports Server (NTRS)

Sutton, P. D.; Stolte, W. J.; Marsh, R. O.

1979-01-01

The results of a comprehensive study of photovoltaic module structural support concepts for photovoltaic central power stations and their associated costs are presented. The objective of the study has been the identification of structural cost drivers. Parametric structural design and cost analyses of complete array systems consisting of modules, primary support structures, and foundations were performed. Area related module cost was found to be constant with design, size, and loading. A curved glass module concept was evaluated and found to have the potential to significantly reduce panel structural costs. Conclusions of the study are: array costs do not vary greatly among the designs evaluated; panel and array costs are strongly dependent on design loading; and the best support configuration is load dependent

Robust energy-absorbing compensators for the ACTEX II test article

NASA Astrophysics Data System (ADS)

Blaurock, Carl A.; Miller, David W.; Nye, Ted

1995-05-01

The paper addresses the problem of satellite solar panel vibration. A multi-layer vibration control scheme is investigated using a flight test article. Key issues in the active control portion are presented in the paper. The paper discusses the primary control design drivers, which are the time variations in modal frequencies due to configuration and thermal changes. A local control design approach is investigated, but found to be unworkable due to sensor/actuator non-collocation. An alternate design process uses linear robust control techniques, by describing the modal shifts as uncertainties. Multiple modal design, alpha- shifted multiple model, and a feedthrough compensation scheme are examined. Ground and simulation tests demonstrate that the resulting controllers provide significant vibration reduction in the presence of expected system variations.

Whole Building Cost and Performance Measurement: Data Collection Protocol Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fowler, Kimberly M.; Spees, Kathleen L.; Kora, Angela R.

2009-03-27

This protocol was written for the Department of Energy’s Federal Energy Management Program (FEMP) to be used by the public as a tool for assessing building cost and performance measurement. The primary audiences are sustainable design professionals, asset owners, building managers, and research professionals within the Federal sector. The protocol was developed based on the need for measured performance and cost data on sustainable design projects. Historically there has not been a significant driver in the public or private sector to quantify whole building performance in comparable terms. The deployment of sustainable design into the building sector has initiated manymore » questions on the performance and operational cost of these buildings.« less

Design and development of compact pulsed power driver for electron beam experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Deb, Pankaj; Sharma, S.K.; Adhikary, B.

2014-07-01

Pulsed electron beam generation requires high power pulses of fast rise, short duration pulse with flat top. With this objective we have designed a low cost compact pulsed power driver based on water dielectric transmission line. The paper describes the design aspects and construction of the pulse power driver and its experimental results. The pulsed power driver consist of a capacitor bank and its charging power supply, high voltage generator, high voltage switch and pulse compression system. (author)

Model for understanding consumer textural food choice

PubMed Central

Jeltema, Melissa; Beckley, Jacqueline; Vahalik, Jennifer

2015-01-01

The current paradigm for developing products that will match the marketing messaging is flawed because the drivers of product choice and satisfaction based on texture are misunderstood. Qualitative research across 10 years has led to the thesis explored in this research that individuals have a preferred way to manipulate food in their mouths (i.e., mouth behavior) and that this behavior is a major driver of food choice, satisfaction, and the desire to repurchase. Texture, which is currently thought to be a major driver of product choice, is a secondary factor, and is important only in that it supports the primary driver—mouth behavior. A model for mouth behavior is proposed and the qualitative research supporting the identification of different mouth behaviors is presented. The development of a trademarked typing tool for characterizing mouth behavior is described along with quantitative substantiation of the tool's ability to group individuals by mouth behavior. The use of these four groups to understand textural preferences and the implications for a variety of areas including product design and weight management are explored. PMID:25987995

Redesign of Transjakarta Bus Driver's Cabin

NASA Astrophysics Data System (ADS)

Mardi Safitri, Dian; Azmi, Nora; Singh, Gurbinder; Astuti, Pudji

2016-02-01

Ergonomic risk at work stations with type Seated Work Control was one of the problems faced by Transjakarta bus driver. Currently “Trisakti” type bus, one type of bus that is used by Transjakarta in corridor 9, serving route Pinang Ranti - Pluit, gained many complaints from drivers. From the results of Nordic Body Map questionnaires given to 30 drivers, it was known that drivers feel pain in the neck, arms, hips, and buttocks. Allegedly this was due to the seat position and the button/panel bus has a considerable distance range (1 meter) to be achieved by drivers. In addition, preliminary results of the questionnaire using Workstation Checklist identified their complaints about uncomfortable cushion, driver's seat backrest, and the exact position of the AC is above the driver head. To reduce the risk level of ergonomics, then did research to design the cabin by using a generic approach to designing products. The risk analysis driver posture before the design was done by using Rapid Upper Limb Assessment (RULA), Rapid Entire Body Assessment (REBA), and Quick Exposure Checklist (QEC), while the calculation of the moment the body is done by using software Mannequin Pro V10.2. Furthermore, the design of generic products was done through the stages: need metric-matrix, house of quality, anthropometric data collection, classification tree concept, concept screening, scoring concept, design and manufacture of products in the form of two-dimensional. While the design after design risk analysis driver posture was done by using RULA, REBA, and calculation of moments body as well as the design visualized using software 3DMax. From the results of analysis before the draft design improvements cabin RULA obtained scores of 6, REBA 9, and the result amounted to 57.38% QEC and moment forces on the back is 247.3 LbF.inch and on the right hip is 72.9 LbF.in. While the results of the proposed improvements cabin design RULA obtained scores of 3, REBA 4, and the moment of force on the back is 90.3 LbF.in and on the right hip is 70.6 LbF.in. This indicated improvement cabin design can reduce ergonomic risk with lower scores on several parts of the body.

The California corridor transportation system: A design summary

NASA Technical Reports Server (NTRS)

1990-01-01

A design group was assembled to find and research criteria relevent to the design of a California Corridor Transportation System. The efforts of this group included defining the problem, conducting a market analysis, formulation of a demand model, identification and evaluation of design drivers, and the systematic development of a solution. The problems of the current system were analyzed and used to determine design drivers, which were divided into the broad categories of cost, convenience, feasibility, environment, safety, and social impact. The relative importance of individual problems was addressed, resulting in a hierarchy of design drivers. Where possible, methods of evaluating the relative merit of proposed systems with respect to each driver were developed. Short takeoff vertical landing aircraft concepts are also discussed for supersonic fighters.

An Evaluation of Graduated Driver Licensing Effects on Fatal Crash Involvements of Young Drivers in the United States

PubMed Central

Fell, James C.; Jones, Kristina; Romano, Eduardo; Voas, Robert

2013-01-01

Objective Graduated driver licensing (GDL) systems are designed to reduce the high crash risk of young novice drivers. Almost all states in the United States have some form of a three-phased GDL system with various restrictions in the intermediate phase. Studies of the effects of GDL in various states show significant reductions in fatal crash involvements of 16- and 17-year-old drivers; however, only a few national studies of GDL effects have been published. The objective of this national panel study was to evaluate the effect of GDL laws on the fatal crash involvements of novice drivers while controlling for possible confounding factors not accounted for in prior studies. Methods The Fatality Analysis Reporting System (FARS) was used to examine 16- and 17-year-old driver involvement in fatal crashes (where GDL laws are applied) relative to two young driver age groups (19-20, 21-25) where GDL would not be expected to have an effect. Dates when various GDL laws were adopted in the states between 1990 and 2007 were coded from a variety of sources. Covariates in the longitudinal panel regression analyses conducted included four laws that could have an effect on 16- and 17-year-old drivers: primary enforcement seat belt laws, zero-tolerance (ZT) alcohol laws for drivers younger than age 21, lowering the blood alcohol concentration limit for driving to .08, and so-called “use and lose” laws where drivers aged 20 and younger lose their licenses for underage drinking violations. Results The adoption of a GDL law of average strength was associated with a significant decrease in fatal crash involvements of 16- and 17-year-old drivers relative to fatal crash involvements of one of the two comparison groups. GDL laws rated as “good” showed stronger relationships to fatal crash reductions, and laws rated as “less than good” showed no reductions in crash involvements relative to the older driver comparison groups. Conclusions States that adopt a basic GDL law can expect a decrease of 8 to 14% in the proportion of 16- and 17-year-old drivers involved in fatal crashes (relative to 21- to 25-year-old drivers), depending upon their other existing laws that affect novice drivers, such as those used in these analyses. This finding is consistent with recent national studies that used different outcome measures and covariates. The results of this study provide additional support for states to adopt, maintain, and upgrade GDL systems to reduce youthful traffic crash fatalities. PMID:21972851

Assessment of vehicle safety problems for special driving populations

DOT National Transportation Integrated Search

1979-02-16

The report describes vehicle safety problems reported in interviews with 460 physically limited drivers and 41 physically limited non-drivers. The problems reported involved operation of primary and secondary controls, operating other vehicle mechani...

Cell Death Pathways in Mutant Rhodopsin Rat Models Identifies Genotype-Specific Targets Controlling Retinal Degeneration.

PubMed

Viringipurampeer, Ishaq A; Gregory-Evans, Cheryl Y; Metcalfe, Andrew L; Bashar, Emran; Moritz, Orson L; Gregory-Evans, Kevin

2018-06-18

Retinitis pigmentosa (RP) is a group of inherited neurological disorders characterized by rod photoreceptor cell death, followed by secondary cone cell death leading to progressive blindness. Currently, there are no viable treatment options for RP. Due to incomplete knowledge of the molecular signaling pathways associated with RP pathogenesis, designing therapeutic strategies remains a challenge. In particular, preventing secondary cone photoreceptor cell loss is a key goal in designing potential therapies. In this study, we identified the main drivers of rod cell death and secondary cone loss in the transgenic S334ter rhodopsin rat model, tested the efficacy of specific cell death inhibitors on retinal function, and compared the effect of combining drugs to target multiple pathways in the S334ter and P23H rhodopsin rat models. The primary driver of early rod cell death in the S334ter model was a caspase-dependent process, whereas cone cell death occurred though RIP3-dependent necroptosis. In comparison, rod cell death in the P23H model was via necroptotic signaling, whereas cone cell loss occurred through inflammasome activation. Combination therapy of four drugs worked better than the individual drugs in the P23H model but not in the S334ter model. These differences imply that treatment modalities need to be tailored for each genotype. Taken together, our data demonstrate that rationally designed genotype-specific drug combinations will be an important requisite to effectively target primary rod cell loss and more importantly secondary cone survival.

Clinical effect of driver mutations of JAK2, CALR, or MPL in primary myelofibrosis.

PubMed

Rumi, Elisa; Pietra, Daniela; Pascutto, Cristiana; Guglielmelli, Paola; Martínez-Trillos, Alejandra; Casetti, Ilaria; Colomer, Dolors; Pieri, Lisa; Pratcorona, Marta; Rotunno, Giada; Sant'Antonio, Emanuela; Bellini, Marta; Cavalloni, Chiara; Mannarelli, Carmela; Milanesi, Chiara; Boveri, Emanuela; Ferretti, Virginia; Astori, Cesare; Rosti, Vittorio; Cervantes, Francisco; Barosi, Giovanni; Vannucchi, Alessandro M; Cazzola, Mario

2014-08-14

We studied the impact of driver mutations of JAK2, CALR, (calreticulin gene) or MPL on clinical course, leukemic transformation, and survival of patients with primary myelofibrosis (PMF). Of the 617 subjects studied, 399 (64.7%) carried JAK2 (V617F), 140 (22.7%) had a CALR exon 9 indel, 25 (4.0%) carried an MPL (W515) mutation, and 53 (8.6%) had nonmutated JAK2, CALR, and MPL (so-called triple-negative PMF). Patients with CALR mutation had a lower risk of developing anemia, thrombocytopenia, and marked leukocytosis compared with other subtypes. They also had a lower risk of thrombosis compared with patients carrying JAK2 (V617F). At the opposite, triple-negative patients had higher incidence of leukemic transformation compared with either CALR-mutant or JAK2-mutant patients. Median overall survival was 17.7 years in CALR-mutant, 9.2 years in JAK2-mutant, 9.1 years in MPL-mutant, and 3.2 years in triple-negative patients. In multivariate analysis corrected for age, CALR-mutant patients had better overall survival than either JAK2-mutant or triple-negative patients. The impact of genetic lesions on survival was independent of current prognostic scoring systems. These observations indicate that driver mutations define distinct disease entities within PMF. Accounting for them is not only relevant to clinical decision-making, but should also be considered in designing clinical trials. © 2014 by The American Society of Hematology.

Clinical effect of driver mutations of JAK2, CALR, or MPL in primary myelofibrosis

PubMed Central

Rumi, Elisa; Pietra, Daniela; Pascutto, Cristiana; Guglielmelli, Paola; Martínez-Trillos, Alejandra; Casetti, Ilaria; Colomer, Dolors; Pieri, Lisa; Pratcorona, Marta; Rotunno, Giada; Sant’Antonio, Emanuela; Bellini, Marta; Cavalloni, Chiara; Mannarelli, Carmela; Milanesi, Chiara; Boveri, Emanuela; Ferretti, Virginia; Astori, Cesare; Rosti, Vittorio; Cervantes, Francisco; Barosi, Giovanni; Vannucchi, Alessandro M.

2014-01-01

We studied the impact of driver mutations of JAK2, CALR, (calreticulin gene) or MPL on clinical course, leukemic transformation, and survival of patients with primary myelofibrosis (PMF). Of the 617 subjects studied, 399 (64.7%) carried JAK2 (V617F), 140 (22.7%) had a CALR exon 9 indel, 25 (4.0%) carried an MPL (W515) mutation, and 53 (8.6%) had nonmutated JAK2, CALR, and MPL (so-called triple-negative PMF). Patients with CALR mutation had a lower risk of developing anemia, thrombocytopenia, and marked leukocytosis compared with other subtypes. They also had a lower risk of thrombosis compared with patients carrying JAK2 (V617F). At the opposite, triple-negative patients had higher incidence of leukemic transformation compared with either CALR-mutant or JAK2-mutant patients. Median overall survival was 17.7 years in CALR-mutant, 9.2 years in JAK2-mutant, 9.1 years in MPL-mutant, and 3.2 years in triple-negative patients. In multivariate analysis corrected for age, CALR-mutant patients had better overall survival than either JAK2-mutant or triple-negative patients. The impact of genetic lesions on survival was independent of current prognostic scoring systems. These observations indicate that driver mutations define distinct disease entities within PMF. Accounting for them is not only relevant to clinical decision-making, but should also be considered in designing clinical trials. PMID:24986690

Human Factors Design Of Automated Highway Systems: Scenario Definition

DOT National Transportation Integrated Search

1995-09-01

Attention to driver acceptance and performance issues during system design will be key to the success of the Automated Highway System (AHS). A first step in the process of defining driver roles and driver-system interface requirements of AHS is the d...

The distraction effects of phone use during a crucial driving maneuver.

PubMed

Hancock, P A; Lesch, M; Simmons, L

2003-07-01

Forty-two licensed drivers were tested in an experiment that required them to respond to an in-vehicle phone at the same time that they were faced with making a crucial stopping decision. Using test track facilities, we also examined the influence of driver gender and driver age on these dual-task response capacities. Each driver was given task practice and then performed a first block of 24 trials, where one trial represented one circuit of the test track. Half of the trials were control conditions in which neither the stop-light was activated nor was the in-vehicle phone triggered. Four trials required only stop-light response and a further four, phone response only. The remaining four trials required the driver to complete each task simultaneously. The order of presentation of specific trials was randomized and the whole sequence was repeated in a second block giving 48 trials per driver. In-vehicle phone response also contained an embedded memory task that was evaluated at the end of each trial circuit. Results confirmed our previous observation that in the dual-task condition there was a slower response to the light change. To compensate for this slowed response, drivers subsequently brake more intensely. Most importantly, we recorded a critical 15% increase in non-response to the stop-light in the presence of the phone distraction task which equates with increased stop-light violations on the open road. These response patterns varied by driver age and driver gender. In particular, age had a large effect on task components that required speed of response to multiple, simultaneous demands. Since driving represents a highly complex and interactive environment, it is not possible to specify a simplistic relationship between these distraction effects and outcome crash patterns. However, we can conclude that such in-vehicle technologies erode performance safety margin and distract drivers from their critical primary task of vehicle control. As such it can be anticipated that a causal relation exists to collision events. This is a crucial concern for all in-vehicle device designers and for the many safety researchers and professionals seeking to reduce the adverse impacts of vehicle collisions.

Distraction and drowsiness in motorcoach drivers : research brief.

DOT National Transportation Integrated Search

2016-11-01

Motorcoach crasheswhen they occurcan involve multiple injuries and deaths, beyond what is typically experienced in light vehicle crashes. Driver error is often cited as a factor in these crashes, with distraction and drowsiness being primary co...

Child passengers and driver culpability in fatal crashes by driver gender.

PubMed

Maasalo, Ida; Lehtonen, Esko; Pekkanen, Jami; Summala, Heikki

2016-07-03

Studies based on accident statistics generally suggest that the presence of a passenger reduces adult drivers' accident risk. However, passengers have been reported to be a source of distraction in a remarkable portion of distraction-related crashes. Although the effect of passengers on driving performance has been studied extensively, few studies have focused on how a child passenger affects the driver.  A child in a car is a potential distractor for parents, especially for mothers of small children, who often suffer from sleep deficit. The aim of this study was to examine how the presence of child passengers of different ages is associated with a higher driver culpability, which was expected due to child-related distraction and fatigue. The analysis was based on the comprehensive data of fatal crashes studied in-depth by multidisciplinary road accident investigation teams in Finland during 1988-2012. Teams determine the primary party who had the most crucial effect on the origin of the event. We define the primary party as culpable and the others involved as nonculpable drivers. The culpability rate was defined as the percentage of culpable drivers and rates were compared for drivers with a child/teen passenger aged 0-17 years (N = 348), with an adult passenger without children (N = 324), and when driving alone (N = 579), grouped by child age and driver gender.  Drivers with specific risk-related behavior (substantial speeding, driving when intoxicated, unbelted, or without a license) were excluded from the analyses, in order to make the drivers with and without children comparable. Only drivers 26-47 years old were included, representing parents with children 0-9 years of age. Male drivers were less often culpable with 0- to 17-year-old passengers in the car than alone or with adults. This was not the case with female drivers. The gender difference in culpability was most marked with small children age 0-4 years. Female drivers' culpability rate with a 0- to 4-year-old child passenger was higher and male drivers' culpability rate was lower compared to drivers without passengers or with only adult passengers. The results indicate that female drivers are at higher risk of crashes than male drivers when driving with small children. Further research is needed to replicate this finding and to determine causal mechanisms.

Evaluation of four steering wheels to determine driver hand placement in a static environment.

PubMed

Mossey, Mary E; Xi, Yubin; McConomy, Shayne K; Brooks, Johnell O; Rosopa, Patrick J; Venhovens, Paul J

2014-07-01

While much research exists on occupant packaging both proprietary and in the literature, more detailed research regarding user preferences for subjective ratings of steering wheel designs is sparse in published literature. This study aimed to explore the driver interactions with production steering wheels in four vehicles by using anthropometric data, driver hand placement, and driver grip design preferences for Generation-Y and Baby Boomers. In this study, participants selected their preferred grip diameter, responded to a series of questions about the steering wheel grip as they sat in four vehicles, and rank ordered their preferred grip design. Thirty-two male participants (16 Baby Boomers between ages 47 and 65 and 16 Generation-Y between ages 18 and 29) participated in the study. Drivers demonstrated different gripping behavior between vehicles and between groups. Recommendations for future work in steering wheel grip design and naturalistic driver hand positioning are discussed. Copyright © 2014. Published by Elsevier Ltd.

Vacuum generation in pneumatic artificial heart drives with a specially designed ejector system.

PubMed

Schima, H; Huber, L; Spitaler, F

1990-06-01

To improve the filling characteristics of pneumatically driven membrane artificial hearts (AHs), a vacuum is applied during diastole. This paper describes an ejector system for AH-drivers based on the Venturi effect, which was designed for this purpose. It provides vacuums of more than -40 mmHg at flow rates up to 50 l/min requiring a supplying primary gas pressure of less than 150 kPa (1140 mmHg). Under normal working conditions, the necessary supply flow was less than 5l/min. The device is small, cheap, quiet and fail-safe, and has been evaluated successfully in experimental and clinical use.

Transcutaneous RF-Powered Implantable Minipump Driven by a Class-E Transmitter

PubMed Central

Moore, William H.; Holschneider, Daniel P.; Givrad, Tina K.

2007-01-01

We describe the design and testing of an inductive coupling system used to power an implantable minipump for applications in ambulating rats. A 2 MHz class-E oscillator driver powered a coil transmitter wound around a 33-cm-diameter rat cage. A receiver coil, a filtered rectifier, and a voltage-sensitive switch powered the implant. The implant DC current at the center of the primary coil (5.1 V) exceeded the level required to activate the solenoid valve in the pump. The variations of the implant current in the volume of the primary coil reflected the variations of the estimated coupling coefficient between the two coils. The pump could be activated in-vivo, while accommodating the vertical and horizontal movements of the animal. Advantages of this design include a weight reduction for the implant, an operation independent from a finite power source, and a remote activation/deactivation. PMID:16916107

Transcutaneous RF-powered implantable minipump driven by a class-E transmitter.

PubMed

Moore, William H; Holschneider, Daniel P; Givrad, Tina K; Maarek, Jean-Michel I

2006-08-01

We describe the design and testing of an inductive coupling system used to power an implantable minipump for applications in ambulating rats. A 2 MHz class-E oscillator driver powered a coil transmitter wound around a 33-cm-diameter rat cage. A receiver coil, a filtered rectifier, and a voltage-sensitive switch powered the implant. The implant DC current at the center of the primary coil (5.1 V) exceeded the level required to activate the solenoid valve in the pump. The variations of the implant current in the volume of the primary coil reflected the variations of the estimated coupling coefficient between the two coils. The pump could be activated in-vivo, while accommodating the vertical and horizontal movements of the animal. Advantages of this design include a weight reduction for the implant, an operation independent from a finite power source, and a remote activation/deactivation.

Wildlife Warning Signs: Public Assessment of Components, Placement and Designs to Optimise Driver Response.

PubMed

Bond, Amy R F; Jones, Darryl N

2013-12-17

Wildlife warning signs are the most commonly used and widespread form of road impact mitigation, aimed at reducing the incidence of wildlife-vehicle collisions. Evidence of the effectiveness of currently used signs is rare and often indicates minimal change in driver behaviour. Improving the design of these signs to increase the likelihood of appropriate driver response has the potential to reduce the incidence of wildlife-vehicle collisions. This study aimed to examine and assess the opinions of drivers on wildlife warning sign designs through a public opinion survey. Three currently used sign designs and five alternative sign designs were compared in the survey. A total of 134 drivers were surveyed. The presence of temporal specifications and an updated count of road-killed animals on wildlife warning signs were assessed, as well as the position of the sign. Drivers' responses to the eight signs were scaled separately at three speed limits and participants indicated the sign to which they were most likely to respond. Three signs consistently ranked high. The messages conveyed by these signs and their prominent features were explored. Animal-activated and vehicle speed-activated signs were ranked very highly by participants. Extensive field trials of various sign designs are needed to further this research into optimizing wildlife warning sign designs.

Rare discrepancies in a driver gene alteration within histologically heterogeneous primary lung cancers.

PubMed

Zhong, Wen-zhao; Su, Jian; Xu, Fang-ping; Zhai, Hao-ran; Zhang, Xu-chao; Yang, Xue-ning; Chen, Zhi-yong; Chen, Zhi-hong; Li, Wei; Dong, Song; Zhou, Qing; Yang, Jin-ji; Liu, Yan-hui; Wu, Yi-long

2015-11-01

Most lung adenocarcinomas consist of mixtures of histological subtypes harboring different frequencies of driver gene mutations. However, little is known about intratumoral heterogeneity(ITH) within histologically heterogeneous primary lung cancers. Investigating key driver genes in respective morphological pattern is crucial to personalized treatment. Morphologically different areas within the same surgically resected adenocarcinomas were extracted from tissues to analyze gene status in each growth pattern. Driver genes, epidermal growth factor receptor (EGFR), KRAS and EML4-ALK, were assessed by assays with different sensitivities. Seventy-nine consecutive eligible patients harboring a driver gene (EGFR=65; KRAS=10; EML4-ALK=4) were enrolled. For EGFR mutations, ITH occurred in 13.3% (8/60) by direct sequencing (DS) and 1.7% (1/60) by amplification refractory mutation system (ARMS) (P=0.016) among adenocarcinomas, but consistent within five adeno-squamous cell carcinomas by both methods. ITH among KRAS mutations were detected in 20% (2/10) by DS, whereas consistent (10/10) by high resolution melting. No discrepancies in EML4-ALK rearrangements existed according to fluorescence in situ hybridization. Rare ITHs of EGFR/KRAS/EML4-ALK alterations within histologically heterogeneous primary lung adenocarcinomas existed by methods with higher sensitivity. Discrepancies might be due to abundance of mutant tumor cells and detection assays. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Design and Qualification of a SmallSat Stepper Motor Driver, Flight Results On-Board the Yes2 Satellite

NASA Astrophysics Data System (ADS)

Graczyk, R.; Kruijff, M.; Spiliotopoulos, I.

2008-08-01

Drivers for stepper motors are a commonly required critical technology for small satellites. This paper highlights the stepper driver design, test, and mission performance for the second Young Engineers' Satellite (YES2). The unit integrates the required digital and power parts and was developed with generic low-cost satellite applications in mind. One of the key mechanisms in YES2 is a friction brake containing a stepper motor which is in turn controlled by a stepper driver. The friction brake was used to control the deployment speed such that the tether deployed according to a pre-described two-stage trajectory. The stepper driver was itself commanded by an on-board computer that used tether deployment data as input and provided the new required position of the brake as output. The stepper driver design was driven by the requirements of a low cost yet reliable redundant design, use of a micro-controller and software commonly known to students, very small dimension, good thermal behavior and capable of delivering high torque at high efficiency. The work followed as much as possible ESA's design standards and was qualified by electromagnetic compatibility, thermal vacuum and shaker tests. It was functionally tested in real-time ground tether deployments. Mission data shows the stepper driver performed well in flight.

Capacitor blocks for linear transformer driver stages.

PubMed

Kovalchuk, B M; Kharlov, A V; Kumpyak, E V; Smorudov, G V; Zherlitsyn, A A

2014-01-01

In the Linear Transformer Driver (LTD) technology, the low inductance energy storage components and switches are directly incorporated into the individual cavities (named stages) to generate a fast output voltage pulse, which is added along a vacuum coaxial line like in an inductive voltage adder. LTD stages with air insulation were recently developed, where air is used both as insulation in a primary side of the stages and as working gas in the LTD spark gap switches. A custom designed unit, referred to as a capacitor block, was developed for use as a main structural element of the transformer stages. The capacitor block incorporates two capacitors GA 35426 (40 nF, 100 kV) and multichannel multigap gas switch. Several modifications of the capacitor blocks were developed and tested on the life time and self breakdown probability. Blocks were tested both as separate units and in an assembly of capacitive module, consisting of five capacitor blocks. This paper presents detailed design of capacitor blocks, description of operation regimes, numerical simulation of electric field in the switches, and test results.

The Role of Designated Driver Programs in the Prevention of Alcohol-Impaired Driving: A Critical Reassessment [and] Designated Driver Programs: A Commentary on the DeJong and Wallack Article.

ERIC Educational Resources Information Center

DeJong, William; And Others

1992-01-01

Focus on the designated driver strategy by broadcasters and the alcohol industry deflects attention from other alcohol-related problems and the factors influencing underage alcohol consumption. Strategies should emphasize sobriety checkpoints, no sales to minors, advertising reform, and excise taxes on alcohol. (SK)

Engine balance apparatus and accessory drive device

NASA Technical Reports Server (NTRS)

Egleston, Robert W. (Inventor)

2002-01-01

A balancing mechanism for an engine that has a rotating crankshaft and reciprocating pistons. The balancing mechanism comprises a primary balance mass assembly non-rotatably and removably affixed to the crankshaft. The primary mass assembly comprises a primary mass affixed to a primary hub portion and a primary cap portion removably affixed to the primary hub portion to clamp a portion of the crankshaft therebetween. A secondary balance mass assembly may be rotatably and removably supported on the crankshaft. A driver assembly is affixed to the crankshaft to cause the secondary balance mass to rotate in a direction that is opposite to the direction in which the crank shaft is rotating. The driver assembly may include auxiliary gears configured to transport rotary power to auxiliary components. The gears are readily detachable from the apparatus to facilitate inspection and repair operations.

EXPRES: a next generation RV spectrograph in the search for earth-like worlds

NASA Astrophysics Data System (ADS)

Jurgenson, C.; Fischer, D.; McCracken, T.; Sawyer, D.; Szymkowiak, A.; Davis, A.; Muller, G.; Santoro, F.

2016-08-01

The EXtreme PREcision Spectrograph (EXPRES) is an optical fiber fed echelle instrument being designed and built at the Yale Exoplanet Laboratory to be installed on the 4.3-meter Discovery Channel Telescope operated by Lowell Observatory. The primary science driver for EXPRES is to detect Earth-like worlds around Sun-like stars. With this in mind, we are designing the spectrograph to have an instrumental precision of 15 cm/s so that the on-sky measurement precision (that includes modeling for RV noise from the star) can reach to better than 30 cm/s. This goal places challenging requirements on every aspect of the instrument development, including optomechanical design, environmental control, image stabilization, wavelength calibration, and data analysis. In this paper we describe our error budget, and instrument optomechanical design.

Description of a MIL-STD-1553B Data Bus Ada Driver for the LeRC EPS Testbed

NASA Technical Reports Server (NTRS)

Mackin, Michael A.

1995-01-01

This document describes the software designed to provide communication between control computers in the NASA Lewis Research Center Electrical Power System Testbed using MIL-STD-1553B. The software drivers are coded in the Ada programming language and were developed on a MSDOS-based computer workstation. The Electrical Power System (EPS) Testbed is a reduced-scale prototype space station electrical power system. The power system manages and distributes electrical power from the sources (batteries or photovoltaic arrays) to the end-user loads. The electrical system primary operates at 120 volts DC, and the secondary system operates at 28 volts DC. The devices which direct the flow of electrical power are controlled by a network of six control computers. Data and control messages are passed between the computers using the MIL-STD-1553B network. One of the computers, the Power Management Controller (PMC), controls the primary power distribution and another, the Load Management Controller (LMC), controls the secondary power distribution. Each of these computers communicates with two other computers which act as subsidiary controllers. These subsidiary controllers are, in turn, connected to the devices which directly control the flow of electrical power.

Scoping the parameter space for demo and the engineering test facility (ETF)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meier, Wayne R.

1999-01-19

In our IFE development plan, we have set a goal of building an Engineering Test Facility (ETF) for a total cost of $2B and a Demo for $3B. In Mike Campbell' s presentation at Madison, we included a viewgraph with an example Demo that had 80 to 250 MWe of net power and showed a plausible argument that it could cost less than $3B. In this memo, I examine the design space for the Demo and then briefly for the ETF. Instead of attempting to estimate the costs of the drivers, I pose the question in a way to definemore » R&D goals: As a function of key design and performance parameters, how much can the driver cost if the total facility cost is limited to the specified goal? The design parameters examined for the Demo included target gain, driver energy, driver efficiency, and net power output. For the ETF; the design parameters are target gain, driver energy, and target yield. The resulting graphs of allowable driver cost determine the goals that the driver R&D programs must seek to meet.« less

A driver-adaptive stability control strategy for sport utility vehicles

NASA Astrophysics Data System (ADS)

Zhu, Shenjin; He, Yuping

2017-08-01

Conventional vehicle stability control (VSC) systems are designed for average drivers. For a driver with a good driving skill, the VSC systems may be redundant; for a driver with a poor driving skill, the VSC intervention may be inadequate. To increase safety of sport utility vehicles (SUVs), this paper proposes a novel driver-adaptive VSC (DAVSC) strategy based on scaling the target yaw rate commanded by the driver. The DAVSC system is adaptive to drivers' driving skills. More control effort would be exerted for drivers with poor driving skills, and vice versa. A sliding mode control (SMC)-based differential braking (DB) controller is designed using a three degrees of freedom (DOF) yaw-plane model. An eight DOF nonlinear yaw-roll model is used to simulate the SUV dynamics. Two driver models, namely longitudinal and lateral, are used to 'drive' the virtual SUV. By integrating the virtual SUV, the DB controller, and the driver models, the performance of the DAVSC system is investigated. The simulations demonstrate the effectiveness of the DAVSC strategy.

A randomized trial to evaluate the effectiveness of an individual, education-based safe transport program for drivers aged 75 years and older

PubMed Central

2013-01-01

Background There are concerns over safety of older drivers due to increased crash involvement and vulnerability to injury. However, loss of driving privileges can dramatically reduce independence and quality of life for older members of the community. The aim of this trial is to examine the effectiveness of a safe transport program for drivers aged 75 years and older at reducing driving exposure but maintaining mobility. Methods and design A randomised trial will be conducted, involving 380 drivers aged 75 years and older, resident in urban and semi-rural areas of North-West Sydney. The intervention is an education program based on the Knowledge Enhances Your Safety (KEYS) program, adapted for the Australian context. Driving experience will be measured objectively using an in-vehicle monitoring device which includes a global positioning system (GPS) to assess driving exposure and an accelerometer to detect rapid deceleration events. Participation will be assessed using the Keele Assessment of Participation (KAP). Data will be analysed on an intention-to-treat basis; the primary outcomes include driving exposure, rapid deceleration events and scores for KAP. Secondary outcomes include self-reported measures of driving, socialisation, uptake of alternative forms of transport, depressive symptoms and mood. A detailed process evaluation will be conducted, including examination of the delivery of the program and uptake of alternative forms of transport. A subgroup analysis is planned for drivers with reduced function as characterized by established cut-off scores on the Drivesafe assessment tool. Discussion This randomised trial is powered to provide an objective assessment of the efficacy of an individually tailored education and alternative transportation program to promote safety of older drivers but maintain mobility. Trial registration: Australian New Zealand Clinical Trials Registry ACTRN12612000543886. PMID:23379593

Development of a dual-pulse RF driver for an S-band (= 2856 MHz) RF electron linear accelerator

NASA Astrophysics Data System (ADS)

Cha, Sungsu; Kim, Yujong; Lee, Byeong-No; Lee, Byung Cheol; Cha, Hyungki; Ha, Jang Ho; Park, Hyung Dal; Lee, Seung Hyun; Kim, Hui Su; Buaphad, Pikad

2016-04-01

The radiation equipment research division of Korea Atomic Energy Research Institute has developed a Container Inspection System (CIS) using a Radio Frequency (RF) electron linear accelerator for port security. The primary purpose of the CIS is to detect nuclear materials and explosives, as well country-specific prohibited substances, e.g., smuggled. The CIS consists of a 9/6 MeV dualenergy electron linear accelerator for distinguishing between organic and inorganic materials. The accelerator consists of an electron gun, an RF accelerating structure, an RF driver, a modulator, electromagnets, a cooling system, a X-ray generating target, X-ray collimator, a detector, and a container moving system. The RF driver is an important part of the configuration because it is the RF power source: it supplies the RF power to the accelerating structure. A unique aspect of the RF driver is that it generates dual RF power to generate dual energy (9/6 MeV). The advantage of this RF driver is that it can allow the pulse width to vary and can be used to obtain a wide range of energy output, and pulse repetition rates up to 300 Hz. For this reason, 140 W (5 MW - 9 MeV) and 37 W (3.4 MW - 6 MeV) power outputs are available independently. A high power test for 20 minutes demonstrate that stable dual output powers can be generated. Moreover, the dual power can be applied to the accelerator which has stable accelerator operation. In this paper, the design, fabrication and high power test of the RF driver for the RF electron linear accelerator (linac) are presented.

Evaluation of the driver's cab in the Rc5 engine.

PubMed

Hedberg, G

1987-03-01

The opinion of engine drivers concerning the design of the cab in a new engine (Rc5, ASEA, Sweden) is surveyed in the present study, which is aimed at recommendations for further improvements of the new cab. Fifty engine drivers from the northern part of Sweden (Ange, Vannas and Boden), who had been driving the new engine, were selected at random to answer a specially designed questionnaire. Most of the drivers considered the new cab as better than the old one (Rc4) in several respects. Particularly appreciated was an adjustable footrest, on which the safety regulator pedal was fitted, which enabled an individually adjusted position for driving. They also preferred the automatic brake valve located close to the driver and with its movements in a sagittal direction. A number of proposals for further improvement of the cab are presented in order to attain an optimally designed driver's cab.

Manufacturing cost/design trade-studies for flywheel

NASA Astrophysics Data System (ADS)

Noton, B. R.

1982-12-01

A procedure is described for enabling comparison of different flywheel designs based on both performance ratings, and manufacturing and inspection cost. Development of the methodology requires identification of all the steps in the manufacture and inspection of each design, the cost drivers, and the ground rules. A man-hour summary must also be provided. The approach to determine the recurring and nonrecurring manufacturing man-hours is presented. Cost drivers in composite manufacture are discussed as well as the approach to address cost driver data from industry. Some indications for cost driver data from industry. Some indications for cost reduction are included.

Promoting driving safety for teens and adults.

PubMed

Wilson, D; Molloy-Martinez, T

1989-10-01

Traffic accidents are a major cause of death and disability, accounting for significant numbers of brain injuries. The purpose of this article is to discuss those conditions that can affect driver safety. The role of the nurse practitioner in primary prevention involves assessing the health status of drivers, including risk-taking behavior, age-related factors, use of alcohol and medications, and chronic illnesses and physical conditions that can result in driver impairment. Interventions can include patient education, anticipatory guidance, role-playing, referral for skill-building or driver evaluation, and reporting potentially unsafe drivers in keeping with state guidelines. Practitioner involvement in grass-roots community groups is encouraged.

Heavy vehicle driver workload assessment. Task 5, workload assessment protocol

DOT National Transportation Integrated Search

This report presents a description of a prescriptive workload assessment protocol for use in evaluating in-cab devices in heavy vehicles. The primary objective of this heavy vehicle driver workload assessment protocol is to identify the components an...

Genetic progression of malignant melanoma.

PubMed

Tímár, J; Vizkeleti, L; Doma, V; Barbai, T; Rásó, E

2016-03-01

Malignant melanoma of the skin is the most aggressive human cancer given that a primary tumor a few millimeters in diameter frequently has full metastatic competence. In view of that, revealing the genetic background of this potential may also help to better understand tumor dissemination in general. Genomic analyses have established the molecular classification of melanoma based on the most frequent driver oncogenic mutations (BRAF, NRAS, KIT) and have also revealed a long list of rare events, including mutations and amplifications as well as genetic microheterogeneity. At the moment, it is unclear whether any of these rare events have role in the metastasis initiation process since the major drivers do not have such a role. During lymphatic and hematogenous dissemination, the clonal selection process is evidently reflected by differences in oncogenic drivers in the metastases versus the primary tumor. Clonal selection is also evident during lymphatic progression, though the genetic background of this immunoselection is less clear. Genomic analyses of metastases identified further genetic alterations, some of which may correspond to metastasis maintenance genes. The natural genetic progression of melanoma can be modified by targeted (BRAF or MEK inhibitor) or immunotherapies. Some of the rare events in primary tumors may result in primary resistance, while further new genetic lesions develop during the acquired resistance to both targeted and immunotherapies. Only a few genetic lesions of the primary tumor are constant during natural or therapy-modulated progression. EGFR4 and NMDAR2 mutations, MITF and MET amplifications and PTEN loss can be considered as metastasis drivers. Furthermore, BRAF and MITF amplifications as well as PTEN loss are also responsible for resistance to targeted therapies, whereas NRAS mutation is the only founder genetic lesion showing any association with sensitivity to immunotherapies. Unfortunately, there are hardly any data on the possible organ-specific metastatic drivers in melanoma. These observations suggest that clinical management of melanoma patients must rely on the genetic analysis of the metastatic lesions to be able to monitor progression-associated changes and to personalize therapies.

Predicting and Reducing Driving Mishaps Among Drivers With Type 1 Diabetes

PubMed Central

Gonder-Frederick, Linda A.; Singh, Harsimran; Ingersoll, Karen S.; Banton, Tom; Grabman, Jesse H.; Schmidt, Karen; Clarke, William

2017-01-01

OBJECTIVE Two aims of this study were to develop and validate A) a metric to identify drivers with type 1 diabetes at high risk of future driving mishaps and B) an online intervention to reduce mishaps among high-risk drivers. RESEARCH DESIGN AND METHODS To achieve aim A, in study 1, 371 drivers with type 1 diabetes from three U.S. regions completed a series of established questionnaires about diabetes and driving. They recorded their driving mishaps over the next 12 months. Questionnaire items that uniquely discriminated drivers who did and did not have subsequent driving mishaps were assembled into the Risk Assessment of Diabetic Drivers (RADD) scale. In study 2, 1,737 drivers with type 1 diabetes from all 50 states completed the RADD online. Among these, 118 low-risk (LR) and 372 high-risk (HR) drivers qualified for and consented to participate in a 2-month treatment period followed by 12 monthly recordings of driving mishaps. To address aim B, HR participants were randomized to receive either routine care (RC) or the online intervention “DiabetesDriving.com” (DD.com). Half of the DD.com participants received a motivational interview (MI) at the beginning and end of the treatment period to boost participation and efficacy. All of the LR participants were assigned to RC. In both studies, the primary outcome variable was driving mishaps. RESULTS Related to aim A, in study 1, the RADD demonstrated 61% sensitivity and 75% specificity. Participants in the upper third of the RADD distribution (HR), compared with those in the lower third (LR), reported 3.03 vs. 0.87 mishaps/driver/year, respectively (P < 0.001). In study 2, HR and LR participants receiving RC reported 4.3 and 1.6 mishaps/driver/year, respectively (P < 0.001). Related to aim B, in study 2, MIs did not enhance participation or efficacy, so the DD.com and DD.com + MI groups were combined. DD.com participants reported fewer hypoglycemia-related driving mishaps than HR participants receiving RC (P = 0.01), but more than LR participants receiving RC, reducing the difference between the HR and LR participants receiving RC by 63%. HR drivers differed from LR drivers at baseline across a variety of hypoglycemia and driving parameters. CONCLUSIONS The RADD identified higher-risk drivers, and identification seemed relatively stable across time, samples, and procedures. This 11-item questionnaire could inform patients at higher risk, and their clinicians, that they should take preventive steps to reduce driving mishaps, which was accomplished in aim B using DD.com. PMID:28404657

A predictive control framework for torque-based steering assistance to improve safety in highway driving

NASA Astrophysics Data System (ADS)

Ercan, Ziya; Carvalho, Ashwin; Tseng, H. Eric; Gökaşan, Metin; Borrelli, Francesco

2018-05-01

Haptic shared control framework opens up new perspectives on the design and implementation of the driver steering assistance systems which provide torque feedback to the driver in order to improve safety. While designing such a system, it is important to account for the human-machine interactions since the driver feels the feedback torque through the hand wheel. The controller should consider the driver's impact on the steering dynamics to achieve a better performance in terms of driver's acceptance and comfort. In this paper we present a predictive control framework which uses a model of driver-in-the-loop steering dynamics to optimise the torque intervention with respect to the driver's neuromuscular response. We first validate the system in simulations to compare the performance of the controller in nominal and model mismatch cases. Then we implement the controller in a test vehicle and perform experiments with a human driver. The results show the effectiveness of the proposed system in avoiding hazardous situations under different driver behaviours.

Understanding Trends in Wind Turbine Prices Over the Past Decade

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bolinger, Mark; Wiser, Ryan

Taking a bottom-up approach, this report examines seven primary drivers of wind turbine prices in the United States, with the goal of estimating the degree to which each contributed to the doubling in turbine prices from 2002 through 2008, as well as the subsequent decline in prices through 2010 (our analysis does not extend into 2011 because several of these drivers are best gauged on a full-year basis due to seasonality issues). The first four of these drivers can be considered, at least to some degree, endogenous influences – i.e., those that are largely within the control of the windmore » industry – and include changes in: 1) Labor costs, which have historically risen during times of tight turbine supply; 2) Warranty provisions, which reflect technology performance and reliability, and are most often capitalized in turbine prices; 3) Turbine manufacturer profitability, which can impact turbine prices independently of costs; and 4) Turbine design, which for the purpose of this analysis is principally manifested through increased turbine size. The other three drivers analyzed in this study can be considered exogenous influences, in that they can impact wind turbine costs but fall mostly outside of the direct control of the wind industry. These exogenous drivers include changes in: 5) Raw materials prices, which affect the cost of inputs to the manufacturing process; 6) Energy prices, which impact the cost of manufacturing and transporting turbines; and 7) Foreign exchange rates, which can impact the dollar amount paid for turbines and components imported into the United States.« less

Teaching Driver Education Technology to Novice Drivers.

ERIC Educational Resources Information Center

Young, Anthony

A cybernetic unit in driver education was developed to help grade 10 students develop the skills needed to acquire and process driver education information and prepare for the driving phase of driver education in grade 11. Students used a simulator to engage in a series of scenarios designed to promote development of social, behavioral, and mental…

78 FR 76392 - Hours of Service of Drivers: Application for Exemption; David Muresan

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-17

...-0047] Hours of Service of Drivers: Application for Exemption; David Muresan AGENCY: Federal Motor... of service (HOS) rules. Mr. Muresan is a long-haul truck driver who teams with a second driver in... co-driver be permitted to operate under HOS rules that he has designed. He believes that his...

Performance assessment of an onboard monitoring system for CMV drivers : a field operational test : research brief.

DOT National Transportation Integrated Search

2016-11-01

The primary goal of an onboard monitoring system (OBMS) is to enhance driver performance and safety. OBMSs are employed with the expectation that feedback provided concurrently (via flashing feedback lights in the vehicle) and cumulatively (via coach...

Deterministic Evolutionary Trajectories Influence Primary Tumor Growth: TRACERx Renal.

PubMed

Turajlic, Samra; Xu, Hang; Litchfield, Kevin; Rowan, Andrew; Horswell, Stuart; Chambers, Tim; O'Brien, Tim; Lopez, Jose I; Watkins, Thomas B K; Nicol, David; Stares, Mark; Challacombe, Ben; Hazell, Steve; Chandra, Ashish; Mitchell, Thomas J; Au, Lewis; Eichler-Jonsson, Claudia; Jabbar, Faiz; Soultati, Aspasia; Chowdhury, Simon; Rudman, Sarah; Lynch, Joanna; Fernando, Archana; Stamp, Gordon; Nye, Emma; Stewart, Aengus; Xing, Wei; Smith, Jonathan C; Escudero, Mickael; Huffman, Adam; Matthews, Nik; Elgar, Greg; Phillimore, Ben; Costa, Marta; Begum, Sharmin; Ward, Sophia; Salm, Max; Boeing, Stefan; Fisher, Rosalie; Spain, Lavinia; Navas, Carolina; Grönroos, Eva; Hobor, Sebastijan; Sharma, Sarkhara; Aurangzeb, Ismaeel; Lall, Sharanpreet; Polson, Alexander; Varia, Mary; Horsfield, Catherine; Fotiadis, Nicos; Pickering, Lisa; Schwarz, Roland F; Silva, Bruno; Herrero, Javier; Luscombe, Nick M; Jamal-Hanjani, Mariam; Rosenthal, Rachel; Birkbak, Nicolai J; Wilson, Gareth A; Pipek, Orsolya; Ribli, Dezso; Krzystanek, Marcin; Csabai, Istvan; Szallasi, Zoltan; Gore, Martin; McGranahan, Nicholas; Van Loo, Peter; Campbell, Peter; Larkin, James; Swanton, Charles

2018-04-19

The evolutionary features of clear-cell renal cell carcinoma (ccRCC) have not been systematically studied to date. We analyzed 1,206 primary tumor regions from 101 patients recruited into the multi-center prospective study, TRACERx Renal. We observe up to 30 driver events per tumor and show that subclonal diversification is associated with known prognostic parameters. By resolving the patterns of driver event ordering, co-occurrence, and mutual exclusivity at clone level, we show the deterministic nature of clonal evolution. ccRCC can be grouped into seven evolutionary subtypes, ranging from tumors characterized by early fixation of multiple mutational and copy number drivers and rapid metastases to highly branched tumors with >10 subclonal drivers and extensive parallel evolution associated with attenuated progression. We identify genetic diversity and chromosomal complexity as determinants of patient outcome. Our insights reconcile the variable clinical behavior of ccRCC and suggest evolutionary potential as a biomarker for both intervention and surveillance. Copyright © 2018 Francis Crick Institute. Published by Elsevier Inc. All rights reserved.

Identification of Dominant Flood Drivers across Canada

NASA Astrophysics Data System (ADS)

Singh, J.; Karmakar, S.; Ghosh, S.; Simonovic, S.; Gusain, A.

2016-12-01

In recent past, flooding has taken a devastating form causing societal, economic, and environmental losses over the Globe. Reliable information on the cause of occurrence, time, and magnitude of flood events might be useful for effective planning, design and operation of hydraulic structures to minimize losses. In the present study, we used circular statistics to understand the pattern and seasonality in flooding across Canada. A set of analyses is performed on unregulated daily stream flow data from 318 stream gage stations (procure from HYDAT database) with a record of at least 40 years between 1951-2010. Further, an attempt is also made to identify possible primary drivers of flooding across Canada. To accomplish this, daily precipitation record from 561 stations and 10 resolution snowmelt data from ECMWF ERA 20C during 1951-2010 have been used. Majority of stations reported statistically significant negative trend in flood magnitude in south western part, whereas, an increasing trend in frequency of flooding observed in south eastern part of Canada. The results show a strong evidence of regional patterns of seasonality and inter-annual variability in flooding. It is observed, about 42% of flood events occur during spring (March-May) over south eastern part of Canada and are not associated with extreme precipitation, where snowmelt is found to be primary factor for occurrence of flood events. Further, about 44% of flood events occur during summer (June-August) in southwestern region and having strong association with extreme precipitation. Additionally, we observe the negative trend in precipitation driven flood events (summer flooding) in south western part of Canada. The present study on identification of major flood drivers across Canada shows a need to examine the influence of various climate indices quantifying variation of surface temperature anomalies, which will improve flood prediction and consequently flood risk management. Keywords: Canada, Flood drivers, Flood management, Precipitation, Snowmelt

OSIRIS and SOMBRERO Inertial Fusion Power Plant Designs, Volume 2: Designs, Assessments, and Comparisons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meier, W. R.; Bieri, R. L.; Monsler, M. J.

1992-03-01

This is a comprehensive design study of two Inertial Fusion Energy (IFE) electric power plants. Conceptual designs are presented for a fusion reactor (called Osiris) using an induction-linac heavy-ion beam driver, and another (called SOMBRERO) using a KrF laser driver. The designs covered all aspects of IFE power plants, including the chambers, heat transport and power conversion systems, balance-of-plant facilities, target fabrication, target injection and tracking, as well as the heavy-ion and KrF drivers. The point designs were assessed and compared in terms of their environmental & safety aspects, reliability and availability, economics, and technology development needs.

Alternative design consistency rating methods for two-lane rural highways

DOT National Transportation Integrated Search

2000-08-01

Design consistency refers to the conformance of a highway's geometry with driver expectancy. Drivers make fewer errors in the vicinity of geometric features that conform with their expectations. Techniques to evaluate the consistency of a design docu...

The Effects of Vehicle Redesign on the Risk of Driver Death.

PubMed

Farmer, Charles M; Lund, Adrian K

2015-01-01

This study updates a 2006 report that estimated the historical effects of vehicle design changes on driver fatality rates in the United States, separate from the effects of environmental and driver behavior changes during the same period. In addition to extending the period covered by 8 years, this study estimated the effect of design changes by model year and vehicle type. Driver death rates for consecutive model years of vehicle models without design changes were used to estimate the vehicle aging effect and the death rates that would have been expected if the entire fleet had remained unchanged from the 1985 calendar year. These calendar year estimates are taken to be the combined effect of road environment and motorist behavioral changes, with the difference between them and the actual calendar year driver fatality rates reflecting the effect of changes in vehicle design and distribution of vehicle types. The effects of vehicle design changes by model year were estimated for cars, SUVs, and pickups by computing driver death rates for model years 1984-2009 during each of their first 3 full calendar years of exposure and comparing with the expected rates if there had been no design changes. As reported in the 2006 study, had there been no changes in the vehicle fleet, driver death risk would have declined during calendar years 1985-1993 and then slowly increased from 1993 to 2004. The updated results indicate that the gradual increase would have continued through 2006, after which driver fatality rates again would have declined through 2012. Overall, it is estimated that there were 7,700 fewer driver deaths in 2012 than there would have been had vehicle designs not changed. Cars were the first vehicle type whose design safety generally exceeded that of the 1984 model year (starting in model year 1996), followed by SUVs (1998 models) and pickups (2002 models). By the 2009 model year, car driver fatality risk had declined 51% from its high in 1994, pickup driver fatality risk had declined 61% from its high in 1988, and SUV risk had declined 79% from its high in 1988. The risk of driver death in 2009 model passenger vehicles was 8% lower than that in 2008 models and about half that in 1984 models. Changes in vehicles, whether from government regulations and consumer testing that led to advanced safety designs or from other factors such as consumer demand for different sizes and types of vehicles, have been key contributors to the decline in U.S. motor vehicle occupant crash death rates since the mid-1990s. Since the early 1990s, environmental and behavioral risk factors have not shown similar improvement, until the recession of 2007, even though there are many empirically proven countermeasures that have been inadequately applied.

Swift Gamma-Ray Burst Explorer: Mission Design for Rapid, Accurate Location of Gamma-ray Bursts

NASA Technical Reports Server (NTRS)

Bundas, David J.

2004-01-01

The Swift Gamma-ray Burst Explorer is a NASA Mid-sized Explorer (MIDEX) with the primary mission of determining the origins of Gamma-Ray Bursts (GRBs). It will be the first mission to autonomously respond to newly-discovered GRBs and provide immediate follow-up with narrow field instruments capable of multi-wavelength (UV, Optical, X-ray) observations. The characteristics of GRBs that are the key mission design drivers, are their non-repeating and brief duration bursts of multi-wavelength photons. In addition, rapid notification of the location and characteristics of the GRBs to ground-and-space-based observatories drive the end-to-end data analysis and distribution requirements.

Materials Lifecycle and Environmental Consideration at NASA

NASA Technical Reports Server (NTRS)

Clark-Ingram, Marceia

2010-01-01

The aerospace community faces tremendous challenges with continued availability of existing material supply chains during the lifecycle of a program. Many obsolescence drivers affect the availability of materials: environmental safety ahd health regulations, vendor and supply economics, market sector demands,and natural disasters. Materials selection has become increasingly more critical when designing aerospace hardware. NASA and DoD conducted a workshop with subject matter experts to discuss issues and define solutions for materials selections during the lifecycle phases of a product/system/component. The three primary lifecycle phases were: Conceptualization/Design, Production & Sustainment, and End of life / Reclamation. Materials obsolescence and pollution prevention considerations were explored for the aforementioned lifecycle phases. The recommended solutions from the workshop are being presented.

Swift Gamma-ray Burst Explorer: Mission Design for Rapid, Accurate Location of Gamma-ray Bursts

NASA Technical Reports Server (NTRS)

Bundas, David J.

2005-01-01

The Swift Gamma-ray Burst Explorer is a NASA Mid-sized Explorer (MIDEX) with the primary mission of determining the origins of Gamma-Ray Bursts (GRBs). It will be the first mission to autonomously respond to newly-discovered GRBs and provide immediate follow-up with narrow field instruments capable of multi-wavelength (UT, Optical, X-ray) observations. The characteristics of GRBs that are the key mission design drivers, are their non-repeating and brief duration bursts of multi-wavelength photons. In addition, rapid notification of the location and characteristics of the GRBs to ground-and-space-based observatories drive the end-to-end data analysis and distribution requirements.

Preliminary design approach for large high precision segmented reflectors

NASA Technical Reports Server (NTRS)

Mikulas, Martin M., Jr.; Collins, Timothy J.; Hedgepeth, John M.

1990-01-01

A simplified preliminary design capability for erectable precision segmented reflectors is presented. This design capability permits a rapid assessment of a wide range of reflector parameters as well as new structural concepts and materials. The preliminary design approach was applied to a range of precision reflectors from 10 meters to 100 meters in diameter while considering standard design drivers. The design drivers considered were: weight, fundamental frequency, launch packaging volume, part count, and on-orbit assembly time. For the range of parameters considered, on-orbit assembly time was identified as the major design driver. A family of modular panels is introduced which can significantly reduce the number of reflector parts and the on-orbit assembly time.

Static Anthropometric Characteristics of Bangladeshi Vehicle Driver: A Case Study

PubMed Central

Sarker, E.

2016-01-01

Background. Inappropriate design of sitting furniture and working equipment causes the serious musculoskeletal injuries and various pains as well as reducing working efficiency. Uncomfortable sitting posture in prolonged driving in Bangladesh is an issue to be solved immediately. Therefore, anthropometric databank of user population is significantly essential for the suitable dimensional design for avoiding these remarkable problems. Methods. This study analyses the anthropometric data of the Bangladeshi male vehicle driver aged between 30 and 60 years. A total of 210 Bangladeshi healthy drivers are considered for 15 anthropometric measurements and compared with the similar anthropometrics of other nationalities. Results. The mean stature and sitting height erect of Bangladeshi driver are 1645 mm and 843 mm, respectively. The mean of body mass index (BMI) of the drivers is 26.09 kg/m2, which indicates that the drivers are overweight. The mean stature of Bangladeshi driver is 17 mm shorter than the driver of Korea and 115 mm shorter than the driver of Iran. Conclusion. There are substantial differences between the body dimensions of Bangladeshi driver and similar dimensions of other countries. In comparison, Bangladeshi driver is found to be the shortest compared with the sample of other nationalities. PMID:27579216

Materials and structures for hypersonic vehicles

NASA Technical Reports Server (NTRS)

Tenney, Darrel R.; Lisagor, W. Barry; Dixon, Sidney C.

1988-01-01

Hypersonic vehicles are envisioned to require, in addition to carbon-carbon and ceramic-matrix composities for leading edges heated to above 2000 F, such 600 to 1800 F operating temperature materials as advanced Ti alloys, nickel aluminides, and metal-matrix composited; These possess the necessary low density and high strength and stiffness. The primary design drivers are maximum vehicle heating rate, total heat load, flight envelope, propulsion system type, mission life requirements and liquid hydrogen containment systems. Attention is presently given to aspects of these materials and structures requiring more intensive development.

Emerging infectious diseases of wildlife: a critical perspective.

PubMed

Tompkins, Daniel M; Carver, Scott; Jones, Menna E; Krkošek, Martin; Skerratt, Lee F

2015-04-01

We review the literature to distinguish reports of vertebrate wildlife disease emergence with sufficient evidence, enabling a robust assessment of emergence drivers. For potentially emerging agents that cannot be confirmed, sufficient data on prior absence (or a prior difference in disease dynamics) are frequently lacking. Improved surveillance, particularly for neglected host taxa, geographical regions and infectious agents, would enable more effective management should emergence occur. Exposure to domestic sources of infection and human-assisted exposure to wild sources were identified as the two main drivers of emergence across host taxa; the domestic source was primary for fish while the wild source was primary for other taxa. There was generally insufficient evidence for major roles of other hypothesized drivers of emergence. Copyright © 2015 Elsevier Ltd. All rights reserved.

Side impact crashes--factors affecting incidence and severity: review of the literature.

PubMed

Chipman, Mary L

2004-03-01

Many traffic crashes are side impact collisions resulting in significant death and injury. A review was conducted of the evidence of driver, road, and vehicle characteristics affecting either the risk of occurrence or the severity of injury in such crashes for papers published from 1996 to early 2003. For drivers, evidence was found of increased crash risk or injury severity only for age and age-related medical conditions (e.g., dementia). Traffic roundabouts and other traffic control devices--stop signs, traffic lights, and so on--had mixed results; traffic controls were better than no controls, but their effectiveness varied with circumstance. Most vehicle characteristics have had little or no effect on crash occurrence. Antilock braking systems (ABS) in the striking vehicle had been anticipated to reduce the risk of crashes, but so far have demonstrated little effect. The primary emphasis in vehicle design has been on protective devices to reduce the severity of injury. Disparity in the size of the two vehicles, especially when the struck vehicle is smaller and lighter, is almost a consistent risk factor for occupant injury. The occupants of light trucks, however, when struck by passengers cars on the opposite side, were at higher risk of injury. Wearing seat belts had a consistently protective effect; airbags did not, but there were few studies, and no field studies, of lateral airbags found. Of all the characteristics examined, vehicle design, including occupant restraints, is the most easily modified in the short term, although road design, traffic control, and the monitoring of older drivers may also prove effective in reducing side impact crashes in the longer term.

Heavy vehicle driver workload assessment. Task 2, standard vehicle configuration/specifications

DOT National Transportation Integrated Search

A variety of high technology in-cab devices have been proposed for use in heavy trucks. Many of these devices introduce subsidiary tasks which may compete with the driver's primary task of safely controlling the vehicle at all times. As part of this ...

A manufacturing database of advanced materials used in spacecraft structures

NASA Technical Reports Server (NTRS)

Bao, Han P.

1994-01-01

Cost savings opportunities over the life cycle of a product are highest in the early exploratory phase when different design alternatives are evaluated not only for their performance characteristics but also their methods of fabrication which really control the ultimate manufacturing costs of the product. In the past, Design-To-Cost methodologies for spacecraft design concentrated on the sizing and weight issues more than anything else at the early so-called 'Vehicle Level' (Ref: DOD/NASA Advanced Composites Design Guide). Given the impact of manufacturing cost, the objective of this study is to identify the principal cost drivers for each materials technology and propose a quantitative approach to incorporating these cost drivers into the family of optimization tools used by the Vehicle Analysis Branch of NASA LaRC to assess various conceptual vehicle designs. The advanced materials being considered include aluminum-lithium alloys, thermoplastic graphite-polyether etherketone composites, graphite-bismaleimide composites, graphite- polyimide composites, and carbon-carbon composites. Two conventional materials are added to the study to serve as baseline materials against which the other materials are compared. These two conventional materials are aircraft aluminum alloys series 2000 and series 7000, and graphite-epoxy composites T-300/934. The following information is available in the database. For each material type, the mechanical, physical, thermal, and environmental properties are first listed. Next the principal manufacturing processes are described. Whenever possible, guidelines for optimum processing conditions for specific applications are provided. Finally, six categories of cost drivers are discussed. They include, design features affecting processing, tooling, materials, fabrication, joining/assembly, and quality assurance issues. It should be emphasized that this database is not an exhaustive database. Its primary use is to make the vehicle designer aware of some of the most important aspects of manufacturing associated with his/her choice of the structural materials. The other objective of this study is to propose a quantitative method to determine a Manufacturing Complexity Factor (MCF) for each material being contemplated. This MCF is derived on the basis of the six cost drivers mentioned above plus a Technology Readiness Factor which is very closely related to the Technology Readiness Level (TRL) as defined in the Access To Space final report. Short of any manufacturing information, our MCF is equivalent to the inverse of TRL. As more manufacturing information is available, our MCF is a better representation (than TRL) of the fabrication processes involved. The most likely application for MCF is in cost modeling for trade studies. On-going work is being pursued to expand the potential applications of MCF.

A manufacturing database of advanced materials used in spacecraft structures

NASA Astrophysics Data System (ADS)

Bao, Han P.

1994-12-01

Cost savings opportunities over the life cycle of a product are highest in the early exploratory phase when different design alternatives are evaluated not only for their performance characteristics but also their methods of fabrication which really control the ultimate manufacturing costs of the product. In the past, Design-To-Cost methodologies for spacecraft design concentrated on the sizing and weight issues more than anything else at the early so-called 'Vehicle Level' (Ref: DOD/NASA Advanced Composites Design Guide). Given the impact of manufacturing cost, the objective of this study is to identify the principal cost drivers for each materials technology and propose a quantitative approach to incorporating these cost drivers into the family of optimization tools used by the Vehicle Analysis Branch of NASA LaRC to assess various conceptual vehicle designs. The advanced materials being considered include aluminum-lithium alloys, thermoplastic graphite-polyether etherketone composites, graphite-bismaleimide composites, graphite- polyimide composites, and carbon-carbon composites. Two conventional materials are added to the study to serve as baseline materials against which the other materials are compared. These two conventional materials are aircraft aluminum alloys series 2000 and series 7000, and graphite-epoxy composites T-300/934. The following information is available in the database. For each material type, the mechanical, physical, thermal, and environmental properties are first listed. Next the principal manufacturing processes are described. Whenever possible, guidelines for optimum processing conditions for specific applications are provided. Finally, six categories of cost drivers are discussed. They include, design features affecting processing, tooling, materials, fabrication, joining/assembly, and quality assurance issues. It should be emphasized that this database is not an exhaustive database. Its primary use is to make the vehicle designer aware of some of the most important aspects of manufacturing associated with his/her choice of the structural materials. The other objective of this study is to propose a quantitative method to determine a Manufacturing Complexity Factor (MCF) for each material being contemplated. This MCF is derived on the basis of the six cost drivers mentioned above plus a Technology Readiness Factor which is very closely related to the Technology Readiness Level (TRL) as defined in the Access To Space final report. Short of any manufacturing information, our MCF is equivalent to the inverse of TRL. As more manufacturing information is available, our MCF is a better representation (than TRL) of the fabrication processes involved.

System-Level Action Required for Wide-Scale Improvement in Quality of Primary Health Care: Synthesis of Feedback from an Interactive Process to Promote Dissemination and Use of Aggregated Quality of Care Data.

PubMed

Bailie, Jodie; Laycock, Alison; Matthews, Veronica; Bailie, Ross

2016-01-01

There is an enduring gap between recommended practice and care that is actually delivered; and there is wide variation between primary health care (PHC) centers in delivery of care. Where aspects of care are not being done well across a range of PHC centers, this is likely due to inadequacies in the broader system. This paper aims to describe stakeholders' perceptions of the barriers and enablers to addressing gaps in Australian Aboriginal and Torres Strait Islander chronic illness care and child health, and to identify key drivers for improvement. This paper draws on data collected as part of a large-scale continuous quality improvement project in Australian Indigenous PHC settings. We undertook a qualitative assessment of stakeholder feedback on the main barriers and enablers to addressing gaps in care for Aboriginal and Torres Strait Islander children and in chronic illness care. Themes on barriers and enablers were further analyzed to develop a "driver diagram," an improvement tool used to locate barriers and enablers within causal pathways (as primary and secondary drivers), enabling them to be targeted by tailored interventions. We identified 5 primary drivers and 11 secondary drivers of high-quality care, and associated strategies that have potential for wide-scale implementation to address barriers and enablers for improving care. Perceived barriers to addressing gaps in care included both health system and staff attributes. Primary drivers were: staff capability to deliver high-quality care; availability and use of clinical information systems and decision support tools; embedding of quality improvement processes and data-driven decision-making; appropriate and effective recruitment and retention of staff; and community capacity, engagement and mobilization for health. Suggested strategies included mechanisms for increasing clinical supervision and support, staff retention, reorientation of service delivery, use of information systems and community health literacy. The findings identify areas of focus for development of barrier-driven, tailored interventions to improve health outcomes. They reinforce the importance of system-level action to improve health center performance and health outcomes, and of developing strategies to address system-wide challenges that can be adapted to local contexts.

Driver responses to differing urban work zone configurations.

PubMed

Morgan, J F; Duley, A R; Hancock, P A

2010-05-01

This study reports the results of a simulator-based assessment of driver response to two different urban highway work zone configurations. One configuration represented an existing design which was contrasted with a second configuration that presented a reduced taper length prototype work zone design. Twenty-one drivers navigated the two different work zones in two different conditions, one with and one without a lead vehicle; in this case a bus. Measures of driver speed, braking, travel path, and collision frequency were recorded. Drivers navigated significantly closer to the boundary of the work area in the reduced taper length design. This proximity effect was moderated by the significant interaction between lead vehicle and taper length and such interactive effects were also observed for driver speed at the end of the work zone and the number of collisions observed within the work zone itself. These results suggest that reduced taper length poses an increase in risk to both drivers and work zone personnel, primarily when driver anticipation is reduced by foreshortened viewing distances. Increase in such risk is to a degree offset by the reduction of overall exposure to the work zone that a foreshortened taper creates. The benefits and limitations to a simulation-based approach to the assessment and prediction of driver behavior in different work zone configurations are also discussed. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Genomic Evolution of Breast Cancer Metastasis and Relapse

DOE PAGES

Yates, Lucy R.; Knappskog, Stian; Wedge, David; ...

2017-08-14

Patterns of genomic evolution between primary and metastatic breast cancer have not been studied in large numbers, despite patients with metastatic breast cancer having dismal survival. We sequenced whole genomes or a panel of 365 genes on 299 samples from 170 patients with locally relapsed or metastatic breast cancer. Several lines of analysis indicate that clones seeding metastasis or relapse disseminate late from primary tumors, but continue to acquire mutations, mostly accessing the same mutational processes active in the primary tumor. Most distant metastases acquired driver mutations not seen in the primary tumor, drawing from a wider repertoire of cancermore » genes than early drivers. Lastly, these include a number of clinically actionable alterations and mutations inactivating SWI-SNF and JAK2-STAT3 pathways.« less

Genomic Evolution of Breast Cancer Metastasis and Relapse

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yates, Lucy R.; Knappskog, Stian; Wedge, David

Patterns of genomic evolution between primary and metastatic breast cancer have not been studied in large numbers, despite patients with metastatic breast cancer having dismal survival. We sequenced whole genomes or a panel of 365 genes on 299 samples from 170 patients with locally relapsed or metastatic breast cancer. Several lines of analysis indicate that clones seeding metastasis or relapse disseminate late from primary tumors, but continue to acquire mutations, mostly accessing the same mutational processes active in the primary tumor. Most distant metastases acquired driver mutations not seen in the primary tumor, drawing from a wider repertoire of cancermore » genes than early drivers. Lastly, these include a number of clinically actionable alterations and mutations inactivating SWI-SNF and JAK2-STAT3 pathways.« less

Crew Exploration Vehicle Ascent Abort Overview

NASA Technical Reports Server (NTRS)

Davidson, John B., Jr.; Madsen, Jennifer M.; Proud, Ryan W.; Merritt, Deborah S.; Sparks, Dean W., Jr.; Kenyon, Paul R.; Burt, Richard; McFarland, Mike

2007-01-01

One of the primary design drivers for NASA's Crew Exploration Vehicle (CEV) is to ensure crew safety. Aborts during the critical ascent flight phase require the design and operation of CEV systems to escape from the Crew Launch Vehicle and return the crew safely to the Earth. To accomplish this requirement of continuous abort coverage, CEV ascent abort modes are being designed and analyzed to accommodate the velocity, altitude, atmospheric, and vehicle configuration changes that occur during ascent. The analysis involves an evaluation of the feasibility and survivability of each abort mode and an assessment of the abort mode coverage. These studies and design trades are being conducted so that more informed decisions can be made regarding the vehicle abort requirements, design, and operation. This paper presents an overview of the CEV, driving requirements for abort scenarios, and an overview of current ascent abort modes. Example analysis results are then discussed. Finally, future areas for abort analysis are addressed.

Quality engineering tools focused on high power LED driver design using boost power stages in switch mode

NASA Astrophysics Data System (ADS)

Ileana, Ioan; Risteiu, Mircea; Marc, Gheorghe

2016-12-01

This paper is a part of our research dedicated to high power LED lamps designing. The boost-up selected technology wants to meet driver producers' tendency in the frame of efficiency and disturbances constrains. In our work we used modeling and simulation tools for implementing scenarios of the driver work when some controlling functions are executed (output voltage/ current versus input voltage and fixed switching frequency, input and output electric power transfer versus switching frequency, transient inductor voltage analysis, and transient out capacitor analysis). Some electrical and thermal stress conditions are also analyzed. Based on these aspects, a high reliable power LED driver has been designed.

Perception and biodynamics in unalerted precrash response.

PubMed

McGehee, Daniel V; Carsten, Oliver M J

2010-01-01

This research seeks to better understand unalerted driver response just prior to a serious vehicle crash. Few studies have been able to view a crash from the inside-with a camera focused on the driver and occupants. Four studies are examined: 1) a high-fidelity simulator study with an unalerted intersection incursion crash among 107 drivers; 2) four crashes from the Virginia Tech Transportation Institute (VTTI) 100 car study; 3) 58 crashes from vehicles equipped with an event triggered video recorder; and 4) a custom-designed high-fidelity simulator experiment that examined unalerted driver response to a head-on crash with a heavy truck. Analyses concentrate on decomposing driver perception, action, facial and postural changes with a focus on describing the neurophysiologic mechanisms designed to respond to danger. Results indicate that drivers involved in severe crashes generally have preview that an impact is about to occur. They respond first with vehicle control inputs (accelerator pedal release) along with facial state changes and withdrawal of the head back towards the head restraint. These responses frequently occur almost simultaneously, providing safety system designers with a number of reliable driver performance measures to monitor. Understanding such mechanisms may assist future advanced driver assistance systems (ADAS), advanced restraints, model development of advanced anthropomorphic test dummies (ATDs), injury prediction and the integration of active and passive safety systems.

Evaluating the effectiveness of regulatory and warning signs on driver behavior near highway/rail crossings : research project capsule.

DOT National Transportation Integrated Search

2016-12-01

The primary objective of this research project is to evaluate the effectiveness of regulatory and warning signs on driver behavior : by analyzing their effectiveness in reducing instances of stopped vehicles within the dynamic envelope zone (i.e., th...

Driver face recognition as a security and safety feature

NASA Astrophysics Data System (ADS)

Vetter, Volker; Giefing, Gerd-Juergen; Mai, Rudolf; Weisser, Hubert

1995-09-01

We present a driver face recognition system for comfortable access control and individual settings of automobiles. The primary goals are the prevention of car thefts and heavy accidents caused by unauthorized use (joy-riders), as well as the increase of safety through optimal settings, e.g. of the mirrors and the seat position. The person sitting on the driver's seat is observed automatically by a small video camera in the dashboard. All he has to do is to behave cooperatively, i.e. to look into the camera. A classification system validates his access. Only after a positive identification, the car can be used and the driver-specific environment (e.g. seat position, mirrors, etc.) may be set up to ensure the driver's comfort and safety. The driver identification system has been integrated in a Volkswagen research car. Recognition results are presented.

Preliminary design considerations for 10 to 40 meter-diameter precision truss reflectors

NASA Technical Reports Server (NTRS)

Mikulas, Martin M., Jr.; Collins, Timothy J.; Hedgepeth, John M.

1990-01-01

A simplified preliminary design capability for erectable precision segmented reflectors is presented. This design capability permits a rapid assessment of a wide range of reflector parameters as well as new structural concepts and materials. The preliminary design approach was applied to a range of precision reflectors from 10 meters to 100 meters in diameter while considering standard design drivers. The design drivers considered were: weight, fundamental frequency, launch packaging volume, part count, and on-orbit assembly time. For the range of parameters considered, on-orbit assembly time was identified as the major design driver. A family of modular panels is introduced which can significantly reduce the number of reflector parts and the on-orbit assembly time.

Low power laser driver design in 28nm CMOS for on-chip and chip-to-chip optical interconnect

NASA Astrophysics Data System (ADS)

Belfiore, Guido; Szilagyi, Laszlo; Henker, Ronny; Ellinger, Frank

2015-09-01

This paper discusses the challenges and the trade-offs in the design of laser drivers for very-short distance optical communications. A prototype integrated circuit is designed and fabricated in 28 nm super-low-power CMOS technology. The power consumption of the transmitter is 17.2 mW excluding the VCSEL that in our test has a DC power consumption of 10 mW. The active area of the driver is only 0.0045 mm2. The driver can achieve an error-free (BER < 10 -12) electrical data-rate of 25 Gbit/s using a pseudo random bit sequence of 27 -1. When the driver is connected to the VCSEL module an open optical eye is reported at 15 Gbit/s. In the tested bias point the VCSEL module has a measured bandwidth of 10.7 GHz.

Handbook for designing roadways for the aging population.

DOT National Transportation Integrated Search

2014-06-01

The original Older Driver Highway Design Handbook was published by FHWA in 1998 (FHWA-RD-97-135). The : 2nd edition, titled Highway Design Handbook for Older Drivers and Pedestrians (FHWA-RD-01-103) was published in : 2001. This 3rd edition, under a ...

Understanding the drivers of interprofessional collaborative practice among HIV primary care providers and case managers in HIV care programmes.

PubMed

Mavronicolas, Heather A; Laraque, Fabienne; Shankar, Arti; Campbell, Claudia

2017-05-01

Care coordination programmes are an important aspect of HIV management whose success depends largely on HIV primary care provider (PCP) and case manager collaboration. Factors influencing collaboration among HIV PCPs and case managers remain to be studied. The study objective was to test an existing theoretical model of interprofessional collaborative practice and determine which factors play the most important role in facilitating collaboration. A self-administered, anonymous mail survey was sent to HIV PCPs and case managers in New York City. An adapted survey instrument elicited information on demographic, contextual, and perceived social exchange (trustworthiness, role specification, and relationship initiation) characteristics. The dependent variable, perceived interprofessional practice, was constructed from a validated scale. A sequential block wise regression model specifying variable entry order examined the relative importance of each group of factors and of individual variables. The analysis showed that social exchange factors were the dominant drivers of collaboration. Relationship initiation was the most important predictor of interprofessional collaboration. Additional influential factors included organisational leadership support of collaboration, practice settings, and frequency of interprofessional meetings. Addressing factors influencing collaboration among providers will help public health programmes optimally design their structural, hiring, and training strategies to foster effective social exchanges and promote collaborative working relationships.

Mechanistic understanding of human-wildlife conflict through a novel application of dynamic occupancy models.

PubMed

Goswami, Varun R; Medhi, Kamal; Nichols, James D; Oli, Madan K

2015-08-01

Crop and livestock depredation by wildlife is a primary driver of human-wildlife conflict, a problem that threatens the coexistence of people and wildlife globally. Understanding mechanisms that underlie depredation patterns holds the key to mitigating conflicts across time and space. However, most studies do not consider imperfect detection and reporting of conflicts, which may lead to incorrect inference regarding its spatiotemporal drivers. We applied dynamic occupancy models to elephant crop depredation data from India between 2005 and 2011 to estimate crop depredation occurrence and model its underlying dynamics as a function of spatiotemporal covariates while accounting for imperfect detection of conflicts. The probability of detecting conflicts was consistently <1.0 and was negatively influenced by distance to roads and elevation gradient, averaging 0.08-0.56 across primary periods (distinct agricultural seasons within each year). The probability of crop depredation occurrence ranged from 0.29 (SE 0.09) to 0.96 (SE 0.04). The probability that sites raided by elephants in primary period t would not be raided in primary period t + 1 varied with elevation gradient in different seasons and was influenced negatively by mean rainfall and village density and positively by distance to forests. Negative effects of rainfall variation and distance to forests best explained variation in the probability that sites not raided by elephants in primary period t would be raided in primary period t + 1. With our novel application of occupancy models, we teased apart the spatiotemporal drivers of conflicts from factors that influence how they are observed, thereby allowing more reliable inference on mechanisms underlying observed conflict patterns. We found that factors associated with increased crop accessibility and availability (e.g., distance to forests and rainfall patterns) were key drivers of elephant crop depredation dynamics. Such an understanding is essential for rigorous prediction of future conflicts, a critical requirement for effective conflict management in the context of increasing human-wildlife interactions. © 2015 Society for Conservation Biology.

A Design Rationale Capture Tool to Support Design Verification and Re-use

NASA Technical Reports Server (NTRS)

Hooey, Becky Lee; Da Silva, Jonny C.; Foyle, David C.

2012-01-01

A design rationale tool (DR tool) was developed to capture design knowledge to support design verification and design knowledge re-use. The design rationale tool captures design drivers and requirements, and documents the design solution including: intent (why it is included in the overall design); features (why it is designed the way it is); information about how the design components support design drivers and requirements; and, design alternatives considered but rejected. For design verification purposes, the tool identifies how specific design requirements were met and instantiated within the final design, and which requirements have not been met. To support design re-use, the tool identifies which design decisions are affected when design drivers and requirements are modified. To validate the design tool, the design knowledge from the Taxiway Navigation and Situation Awareness (T-NASA; Foyle et al., 1996) system was captured and the DR tool was exercised to demonstrate its utility for validation and re-use.

Validation of Rehabilitation Training Programs for Older Drivers

DOT National Transportation Integrated Search

2013-04-01

This project studied the effectiveness of four interventions designed to bolster safe performance among healthy older : drivers: (1) Classroom driver education with supplemental behind-the-wheel instruction; (2) Computer-based exercises : to improve ...

An exploration of the potential impact of the designated driver campaign on bartenders' willingness to over-serve.

PubMed

Reiling, Denise M; Nusbaumer, Michael R

2007-12-01

Much has been written about the impact of the presence of a designated driver on patrons' consumption, but heretofore, its impact on the behaviour of the server has been virtually ignored. The goal of this paper, then, was to explore the potential impact of the presence of a designated driver on alcoholic beverage servers' self-reported willingness to knowingly serve an already intoxicated customer. chi(2) analysis of survey data collected from 938 licensed servers, in the state of Indiana, USA, was performed. Approximately 43% of the bartenders surveyed reported that they either would be or might be willing to over-serve an already intoxicated customer. Of those who answered the follow-up question as to under what conditions they would be willing to over-serve, almost 80% reported that they would do so if the patron were accompanied by a designated driver. The statistical significance of the relationship between these two variables (.000) raises the question of whether the Designated Driver Campaign has the latent function of enabling some servers to neutralize their responsibility for over-serving by disregarding other types of intoxication-related harm.

Launch Architecture Impact on Ascent Abort and Crew Survival

NASA Technical Reports Server (NTRS)

Mathias, Donovan L.; Lawrence, Scott L.

2006-01-01

A study was performed to assess the effect of booster configuration on the ascent abort process. A generic abort event sequence was created and booster related risk drivers were identified. Three model boosters were considered in light of the risk drivers: a solid rocket motor configuration, a side mount combination solid and liquid configuration, and a stacked liquid configuration. The primary risk drivers included explosive fireball, overpressure, and fragment effects and booster-crew module re-contact. Risk drivers that were not specifically booster dependent were not addressed. The solid rocket configuration had the most benign influence on an abort while the side mount architecture provided the most challenging abort environment.

Keep the driver in control: Automating automobiles of the future.

PubMed

Banks, Victoria A; Stanton, Neville A

2016-03-01

Automated automobiles will be on our roads within the next decade but the role of the driver has not yet been formerly recognised or designed. Rather, the driver is often left in a passive monitoring role until they are required to reclaim control from the vehicle. This research aimed to test the idea of driver-initiated automation, in which the automation offers decision support that can be either accepted or ignored. The test case examined a combination of lateral and longitudinal control in addition to an auto-overtake system. Despite putting the driver in control of the automated systems by enabling them to accept or ignore behavioural suggestions (e.g. overtake), there were still issues associated with increased workload and decreased trust. These issues are likely to have arisen due to the way in which the automated system has been designed. Recommendations for improvements in systems design have been made which are likely to improve trust and make the role of the driver more transparent concerning their authority over the automated system. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

HIV Risk Behaviours Differ by Workplace Stability Among Mexican Female Sex Workers With Truck Driver Clientele

PubMed Central

Chen, Nadine E.; Strathdee, Steffanie A.; Rangel, Gudelia; Patterson, Thomas L.; Uribe-Salas, Felipe J.; Rosen, Perth; Villalobos, Jorge; Brouwer, Kimberly C.

2012-01-01

Background In a study of female sex workers (FSWs) servicing truck driver clients in Mexican border cities, we evaluated differences in HIV/STI risk behaviours determined by workplace. Design and Methods Our study was cross-sectional and its population comprised 100 FSWs from Nuevo Laredo (US border) and 100 FSWs from Ciudad Hidalgo (Guatemalan border). The main outcome was primary place of sex work defined as unstable (street, vehicle, gas station, etc.) vs stable (bar, brothel, and hotel). Logistic regression was used to identify correlates associated with trading sex at unstable workplaces in the last month. Results Of the FSWs surveyed, 18% reported an unstable workplace. The majority of FSWs surveyed were young (<30 years), single, had <9th grade education, and had worked in the sex trade for a median of 4.9 years. After controlling for study site, FSWs with unstable vs stable workplaces were more likely to have a majority/all truck driver clientele, but were less likely to have visited a gynaecologist in the last year (OR 0.1, 95% CI 0.03-0.4) or ever had an HIV test (OR 0.1, 95% CI 0.06-0.3), and there was a trend towards lower condom use self-efficacy scores (OR 0.8 per unit increase, 95% CI 0.7-1.0). On multivariate regression, unstable workplace was associated with having majority/all truck driver clientele, being surveyed in Nuevo Laredo, and decreased odds of ever having an HIV test. Conclusions Among Mexican FSWs with truck driver clients, providing safe indoor spaces for sex work may help facilitate public health interventions that improve HIV/STI prevention and reproductive health outcomes. PMID:24724056

Perception and Biodynamics in Unalerted Precrash Response

PubMed Central

McGehee, Daniel V.; Carsten, Oliver M.J.

2010-01-01

This research seeks to better understand unalerted driver response just prior to a serious vehicle crash. Few studies have been able to view a crash from the inside—with a camera focused on the driver and occupants. Four studies are examined: 1) a high-fidelity simulator study with an unalerted intersection incursion crash among 107 drivers; 2) four crashes from the Virginia Tech Transportation Institute (VTTI) 100 car study; 3) 58 crashes from vehicles equipped with an event triggered video recorder; and 4) a custom-designed high-fidelity simulator experiment that examined unalerted driver response to a head-on crash with a heavy truck. Analyses concentrate on decomposing driver perception, action, facial and postural changes with a focus on describing the neurophysiologic mechanisms designed to respond to danger. Results indicate that drivers involved in severe crashes generally have preview that an impact is about to occur. They respond first with vehicle control inputs (accelerator pedal release) along with facial state changes and withdrawal of the head back towards the head restraint. These responses frequently occur almost simultaneously, providing safety system designers with a number of reliable driver performance measures to monitor. Understanding such mechanisms may assist future advanced driver assistance systems (ADAS), advanced restraints, model development of advanced anthropomorphic test dummies (ATDs), injury prediction and the integration of active and passive safety systems. PMID:21050614

Seat belt use, especially among low-use drivers, increases as Florida upgrades to primary seat belt enforcement : traffic tech.

DOT National Transportation Integrated Search

2012-08-01

As a secondary seat belt law State, Florida had worked : for many years to encourage more drivers to wear : their seat belts by participating in annual Click It or : Ticket (CIOT) mobilizations, and by conducting special : programs in rural areas of ...

Biophysical drivers of seasonal variability in Sphagnum gross primary production in a northern temperate bog

Treesearch

Anthony P. Walker; Kelsey R. Carter; Lianhong Gu; Paul J. Hanson; Avni Malhotra; Richard J. Norby; Stephen D. Sebestyen; Stan D. Wullschleger; David J. Weston

2017-01-01

Sphagnum mosses are the keystone species of peatland ecosystems. With rapid rates of climate change occurring in high latitudes, vast reservoirs of carbon accumulated over millennia in peatland ecosystems are potentially vulnerable to rising temperature and changing precipitation. We investigate the seasonal drivers of Sphagnum...

Alternative Fuel Vehicles: What Do the Drivers Say?

Science.gov Websites

); dedicated compressed natural gas (CNG) models; CNG after-market conversions; flexible-fuel methanol models ; flexible-fuel ethanol models, and gasoline models. Overall, drivers reported positive experiences, with primary concerns being lack of range (particularly for the CNG models) and lack of convenient fueling

Driving and dementia

PubMed Central

Lee, Linda; Molnar, Frank

2017-01-01

Abstract Objective To provide primary care physicians with an approach to driving safety concerns when older persons present with memory difficulties. Sources of information The approach is based on an accredited memory clinic training program developed by the Centre for Family Medicine Primary Care Collaborative Memory Clinic. Main message One of the most challenging aspects of dementia care is the assessment of driving safety. Drivers with dementia are at higher risk of motor vehicle collisions, yet many drivers with mild dementia might be safely able to continue driving for several years. Because safe driving is dependent on multiple cognitive and functional skills, clinicians should carefully consider many factors when determining if cognitive concerns affect driving safety. Specific findings on corroborated history and office-based cognitive testing might aid in the physician’s decisions to refer for comprehensive on-road driving evaluation and whether to notify transportation authorities in accordance with provincial reporting requirements. Sensitive communication and a person-centred approach are essential. Conclusion Primary care physicians must consider many factors when determining if cognitive concerns might affect driving safety in older drivers. PMID:28115437

Driving and dementia: Efficient approach to driving safety concerns in family practice.

PubMed

Lee, Linda; Molnar, Frank

2017-01-01

To provide primary care physicians with an approach to driving safety concerns when older persons present with memory difficulties. The approach is based on an accredited memory clinic training program developed by the Centre for Family Medicine Primary Care Collaborative Memory Clinic. One of the most challenging aspects of dementia care is the assessment of driving safety. Drivers with dementia are at higher risk of motor vehicle collisions, yet many drivers with mild dementia might be safely able to continue driving for several years. Because safe driving is dependent on multiple cognitive and functional skills, clinicians should carefully consider many factors when determining if cognitive concerns affect driving safety. Specific findings on corroborated history and office-based cognitive testing might aid in the physician's decisions to refer for comprehensive on-road driving evaluation and whether to notify transportation authorities in accordance with provincial reporting requirements. Sensitive communication and a person-centred approach are essential. Primary care physicians must consider many factors when determining if cognitive concerns might affect driving safety in older drivers. Copyright© the College of Family Physicians of Canada.

Sleepiness/fatigue and distraction/inattention as factors for fatal versus nonfatal commercial motor vehicle driver injuries.

PubMed

Bunn, T L; Slavova, S; Struttmann, T W; Browning, S R

2005-09-01

A retrospective population-based case-control study was conducted to determine whether driver sleepiness/fatigue and inattention/distraction increase the likelihood that a commercial motor vehicle collision (CVC) will be fatal. Cases were identified as CVC drivers who died (fatal) and controls were drivers who survived (nonfatal) an injury collision using the Kentucky Collision Report Analysis for Safer Highways (CRASH) electronic database from 1998-2002. Cases and controls were matched on unit type and roadway type. Conditional logistic regression was performed. Driver sleepiness/fatigue, distraction/inattention, age of 51 years of age and older, and nonuse of safety belts increase the odds that a CVC will be fatal. Primary safety belt law enactment and enforcement for all states, commercial vehicle driver education addressing fatigue and distraction and other approaches including decreased hours-of-service, rest breaks and policy changes, etc. may decrease the probability that a CVC will be fatal.

Experimental testing of designated driver cues

DOT National Transportation Integrated Search

2000-07-27

In theory, the designated-driver concept holds great promise for reducing the incidences of drunk driving. It is simple, inexpensive, almost universally recognized, and generally positively regarded by the U.S. population as a means for avoiding drun...

Roundabout design and elderly drivers.

DOT National Transportation Integrated Search

2011-10-01

Many drivers are apprehensive to accept a roundabout as a viable form of intersection, but their : safety and mobility benefits are increasing their popularity among designers. This thesis is an indepth study of a specific approach at a roundabout in...

Driver expectancy in highway design and traffic operations

DOT National Transportation Integrated Search

1986-05-01

Expectancy relates to a driver's readiness to respond to situations, events, and information in predictable and successful ways. It influences the speed and accuracy of information handling, and affects all aspects of highway design and operations, a...

Driving Performance among Bioptic Telescope Users with Low Vision Two Years after Obtaining Their Driver's License: A Quasi-Experimental Study

ERIC Educational Resources Information Center

Vincent, Claude; Lachance, Jean-Paul; Deaudelin, Isabelle

2012-01-01

This study sought to compare road safety of new drivers with low vision who have followed a specific pilot bioptic training program with other groups of drivers all matched for age and driving experience. A quasi-experimental design was used two years after drivers obtained their license. Drivers were classified in the experimental group (n = 10,…

Fighting against a shortage of truck drivers in logistics: Measures that employers can take to promote drivers' work ability and health.

PubMed

Staats, Ulrike; Lohaus, Daniela; Christmann, Alina; Woitschek, Michèle

2017-01-01

For several years, the transportation industry has been concerned about a severe shortage of professional truck drivers. Studies investigating the reasons found that poor working conditions and stresses and strains resulting from physiological and psychological job demands have had a negative impact on drivers' health and ability to work. Nevertheless, until now, most employers have refrained from offering measures to support the work ability and well-being of drivers, mainly due to financial pressures in the industry. The present study was aimed at designing adequate and affordable measures to support drivers' health. With reference to the Work Ability Index and the house of work ability (Ilmarinen & Tuomi, 2004), 56 truck drivers participated in guided interviews about their working conditions and health-related problems as well as their attitudes, experiences, and desires with respect to being offered supportive measures by their employers. The measures derived are specific and realizable and expected to be widely accepted by professional drivers. They are designed to elicit a positive attitude in the drivers toward exercising and to help them overcome related psychological barriers. The implementation of the recommended measures can be expected to support drivers' work ability and help reduce the frictional costs of their employers.

Wildlife Warning Signs: Public Assessment of Components, Placement and Designs to Optimise Driver Response

PubMed Central

Bond, Amy R. F.; Jones, Darryl N.

2013-01-01

Simple Summary Wildlife warning signs are aimed at reducing wildlife–vehicle collisions but there is little evidence that they are effective. Improving these sign designs to increase driver response may reduce wildlife–vehicle collisions. We examined drivers’ responses to different wildlife warning sign designs through a public survey. The presences of some sign components and sign position were assessed. Drivers’ responses to eight graphically displayed signs and animal- and vehicle-activated signs were ranked and participants indicated the sign to which they were most likely to respond. Three signs ranked highly. Animal- and vehicle-activated signs were also ranked highly by participants. More research into optimising wildlife warning sign designs is needed. Abstract Wildlife warning signs are the most commonly used and widespread form of road impact mitigation, aimed at reducing the incidence of wildlife–vehicle collisions. Evidence of the effectiveness of currently used signs is rare and often indicates minimal change in driver behaviour. Improving the design of these signs to increase the likelihood of appropriate driver response has the potential to reduce the incidence of wildlife–vehicle collisions. This study aimed to examine and assess the opinions of drivers on wildlife warning sign designs through a public opinion survey. Three currently used sign designs and five alternative sign designs were compared in the survey. A total of 134 drivers were surveyed. The presence of temporal specifications and an updated count of road-killed animals on wildlife warning signs were assessed, as well as the position of the sign. Drivers’ responses to the eight signs were scaled separately at three speed limits and participants indicated the sign to which they were most likely to respond. Three signs consistently ranked high. The messages conveyed by these signs and their prominent features were explored. Animal-activated and vehicle speed-activated signs were ranked very highly by participants. Extensive field trials of various sign designs are needed to further this research into optimizing wildlife warning sign designs. PMID:26479756

Human Factors in the Automated Highway System: Transferring Control to the Driver

DOT National Transportation Integrated Search

1995-10-01

Driver capabilities and limitations must be considered to ensure successful implementation of the Automated Highway System (AHS). Human factors investigations of driver performance characteristics provide the basis for determining system design confi...

Self-Interest and the Design of Rules.

PubMed

Singh, Manvir; Wrangham, Richard; Glowacki, Luke

2017-12-01

Rules regulating social behavior raise challenging questions about cultural evolution in part because they frequently confer group-level benefits. Current multilevel selection theories contend that between-group processes interact with within-group processes to produce norms and institutions, but within-group processes have remained underspecified, leading to a recent emphasis on cultural group selection as the primary driver of cultural design. Here we present the self-interested enforcement (SIE) hypothesis, which proposes that the design of rules importantly reflects the relative enforcement capacities of competing parties. We show that, in addition to explaining patterns in cultural change and stability, SIE can account for the emergence of much group-functional culture. We outline how this process can stifle or accelerate cultural group selection, depending on various social conditions. Self-interested enforcement has important bearings on the emergence, stability, and change of rules.

The relation between driving experience and recognition of road signs relative to their locations.

PubMed

Borowsky, Avinoam; Shinar, David; Parmet, Yisrael

2008-04-01

Examine how driving experience and expectations affect the ability of experienced drivers to identify traffic signs--specifically, no right turn (NRT) and no left turn (NLT) at intersections. Failure to heed signs is a frequent cause of accidents, and the authors focused on the contributions of experience and expectancy to sign identification. Inexperienced and experienced drivers were connected to an eye tracker system and briefly exposed to various traffic scenes. Some of the pictures included an NRT sign at the expected location (on the right), and some included the same sign at an unexpected location (on the left). The same procedure was used with an NLT traffic sign. Experienced drivers identified traffic signs better than inexperienced drivers did when the signs were posted at the expected location but identified them worse than did inexperienced drivers when they were at unexpected locations. With experience, drivers' expectations regarding the expected location of traffic signs become so strong that violating these expectancies results in more identification errors among experienced drivers than among inexperienced drivers. To optimize experienced drivers' traffic sign identification, signs must be located in accordance with drivers' expectations--specifically, on the right side of the road. When signs are misplaced, crashes can be caused by inappropriate placement rather than inappropriate driving. Highway designers should ensure that their design conforms to standards that shape experienced drivers' expectations.

Available sight distance on existing highways: Meeting stopping sight distance requirements of an aging population.

PubMed

Gargoum, Suliman A; Tawfeek, Mostafa H; El-Basyouny, Karim; Koch, James C

2018-03-01

An important element of highway design is ensuring that the available sight distance (ASD) on a highway meets driver needs. For instance, if the ASD at any point on a highway is less than the distance required to come to a complete stop after seeing a hazard (i.e. Stopping Sight Distance (SSD)), the driver will not be able to stop in time to avoid a collision. SSD is function of a number of variables which vary depending on the driver, the vehicle driven and surface conditions; examples of such variables include a driver's perception reaction time or PRT (i.e. the time required by the driver to perceive and react to a hazard) and the deceleration rate of the vehicle. Most design guides recommend deterministic values for PRT and deceleration rates. Although these values may serve the needs of the average driver, they may not satisfy the needs of drivers with limited abilities. In other words, even if the ASD exceeds required SSD defined in the design guide, it might not always satisfy the needs of all drivers. While it is impossible to design roads that satisfy the needs of all drivers, the fact that most developed countries suffer from an aging population, means that the number of old drivers on our roads is expected to increase. Since a large proportion of old drivers often have limited abilities, it is expected that the general population of drivers with limited abilities on our roads will increase with time. Accordingly, more efforts are required to ensure that existing road infrastructure is prepared to handle such a change. This paper aims to explore the extent to which ASD on highways satisfies the needs of drivers with limited abilities. The paper first develops MATLAB and Python codes to automatically estimate the ASD on highway point cloud data collected using Light Detection and Ranging (LiDAR) remote sensing technology. The developed algorithms are then used to estimate ASD on seven different crash prone segments in the Province of Alberta, Canada and the ASD is compared to the required SSD on each highway. Three different levels of SSD are defined (SSD for drivers with limited ability, AASHTOs SSD requirements and SSD for drivers with high skill). The results show that, when compared to SSD requirements which integrate limitations in cognitive abilities, a substantial portion of the analyzed segments do not meet the requirements (up to 20%). Similarly, when compared to AASHTO's SSD requirements, up to 6% of the analyzed segments do not meet the requirements. In an attempt to explore the effects of such design limitations on safety, the paper also explores crash rates in noncompliant regions (i.e. regions that do not provide sufficient SSD) and compares them to crash rates in compliant regions. On average, it was found that noncompliant regions experience crash rates that are 2.15 and 1.25 times higher than compliant regions for AASHTO's SSD requirements and those integrating driver limitations, respectively. Furthermore, the study found that a significantly higher proportion of drivers involved in collisions in the noncompliant regions were old drivers. Copyright © 2018 Elsevier Ltd. All rights reserved.

Quadrupole mass spectrometer driver with higher signal levels

NASA Technical Reports Server (NTRS)

Chutjian, Ara (Inventor); Aalami, Dean (Inventor); Darrach, Murray (Inventor); Orient, Otto (Inventor)

2003-01-01

Driving a quadrapole mass spectrometer includes obtaining an air core transformer with a primary and a secondary, matching the secondary to the mass spectrometer, and driving the primary based on first and second voltage levels. Driving of the primary is via an isolating stage that minimizes low level drive signal coupling.

Supplemental Driver Safety Program Development. Volume I--Development Research and Evaluation. Final Report.

ERIC Educational Resources Information Center

McPherson, Kenard; And Others

Instructional modules for driver education programs were prepared to improve safe driving knowledge, attitudes, and performances of 16- to 18-year-old drivers. These modules were designed to provide supplementary instruction in five content areas critical to the safe and efficient operation of motor vehicles by young drivers--speed management,…

Driver license testing of young novice drivers : traffic tech.

DOT National Transportation Integrated Search

2010-11-01

Driver license tests are designed to ensure that people using : public roadways have a minimum level of driving skill and : an awareness of safe driving practices and road laws. License : applicants proceed through the administrative processes of : t...

Age and gender differences in time to collision at braking from the 100-Car Naturalistic Driving Study.

PubMed

Montgomery, Jade; Kusano, Kristofer D; Gabler, Hampton C

2014-01-01

Forward collision warning (FCW) is an active safety system that aims to mitigate the effect of forward collisions by warning the driver of objects in front of the vehicle. Success of FCW relies on how drivers react to the alerts. Drivers who receive too many warnings that they deem as unnecessary-that is, nuisance alarms-may grow to distrust and turn the system off. To reduce the perception of nuisance alarms, FCW systems can be tailored to individual driving styles, but these driving styles must first be characterized. The objective of this study was to characterize differences in braking behavior between age and gender groups in car-following scenarios using data from the 100-Car Naturalistic Driving Study. The data source for this study was the 100-Car Naturalistic Driving Study, which recorded the driving of 108 primary drivers for approximately a year. Braking behavior was characterized in terms of time to collision (TTC) at brake application, a common metric used in the design of warning thresholds of FCW. Because of the large volume of data analyzed, the TTC at which drivers braked during car-following situations was collected via an automated search algorithm. The minimum TTC for each vehicle speed 10 mph increment from 10 mph to 80 mph was recorded for each driver. Mixed model analysis of variance was used to examine the differences between age and gender groups. In total, 527,861 brake applications contained in 11,503 trips were analyzed. Differences in TTC at braking were statistically significant for age and gender (P<.01 for both cases). Males age 18-20 (n=7) had the lowest average minimum TTC at braking of 2.5±0.8 s, and females age 31-50 (n=6) had the highest average minimum TTC at braking of 6.4±0.9 s. On average, women (n=32) braked at a TTC 1.3 s higher than men (n=52). Age was a statistically significant factor for TTC at braking between participants under 30 (n=42) and participants over 30 (n=42), with the latter braking 1.7 s on average before the former. No statistical significance was found between ages 18-20 (n=15) and 21-30 (n=27) or between ages 31-50 (n=23) and 50+(n=19). There are clear statistical differences in TTC at braking for both gender and those over 30 vs. those under 30. Designers of FCW systems can use the data found in this study to tailor alert timings to the target demographic of a vehicle when designing forward collision warning systems. Appropriate alert timings for FCW systems will maximize effectiveness in collision reduction and mitigation.

CDC Vital Signs: Motor Vehicle Crash Injuries: Costly but Preventable

MedlinePlus

... and improve teen driver safety. Support traffic safety laws with media campaigns and visible police presence, such ... prevent crash injuries? Using primary enforcement seat belt laws that cover everyone in the car. A primary ...

Seedling recruitment factors in low-diversity Hawaiian wet forest: towards global comparisons among tropical forests

Treesearch

Faith Inman-Narahari; Rebecca Ostertag; Susan Cordell; Christian P. Giardian; Nelson-Kaula Kehauwealani; Lawren. Sack

2013-01-01

Seed arrival and habitat conditions (i.e., seed limitation and establishment limitation) are the primary drivers of community assembly in tropical forests. Several hypotheses make contradictory predictions for how the relative importance of these two drivers should vary with diversity. Particularly little is known of recruitment limitations in the regeneration of low...

The shifting influence of abiotic drivers during landslide succession in Puerto Rico

Treesearch

L. R. Walker; A. B. Shiels; P. J. Bellingham; A. D. Sparrow; N. Fetcher; F. H. Landau; D. J. Lodge

2013-01-01

Summary 1. Abiotic variables are critical drivers of succession in most primary seres, but how their influence on biota changes over time is rarely examined. Landslides provide good model systems for examining abiotic influences because they are spatially and temporally heterogeneous habitats with distinct abiotic and biotic gradients and post-landslide erosion. 2. In...

Dissolved organic carbon concentration controls benthic primary production: results from in situ chambers in north-temperate lakes

USGS Publications Warehouse

Godwin, Sean C.; Jones, Stuart E.; Weidel, Brian C.; Solomon, Christopher T.

2014-01-01

We evaluated several potential drivers of primary production by benthic algae (periphyton) in north-temperate lakes. We used continuous dissolved oxygen measurements from in situ benthic chambers to quantify primary production by periphyton at multiple depths across 11 lakes encompassing a broad range of dissolved organic carbon (DOC) and total phosphorous (TP) concentrations. Light-use efficiency (primary production per unit incident light) was inversely related to average light availability (% of surface light) in 7 of the 11 study lakes, indicating that benthic algal assemblages exhibit photoadaptation, likely through physiological or compositional changes. DOC alone explained 86% of the variability in log-transformed whole-lake benthic production rates. TP was not an important driver of benthic production via its effects on nutrient and light availability. This result is contrary to studies in other systems, but may be common in relatively pristine north-temperate lakes. Our simple empirical model may allow for the prediction of whole-lake benthic primary production from easily obtained measurements of DOC concentration.

Last Call: decreasing drunk driving among 21-34-year-old bar patrons.

PubMed

Rivara, Frederick P; Boisvert, Deanne; Relyea-Chew, Annemarie; Gomez, Tony

2012-01-01

Any effort to decrease the toll of drunk driving must include efforts directed at people who drink in bars, particularly young adults who use motor vehicles after drinking. We designed a multifaceted social marketing campaign, Last Call, to increase the use of designated drivers and safe rides homes among 21-34-year olds. There were three components to the intervention: (1) use of taxi stands to promote taxi use; (2) point-of-sale information to patrons at partner bars and (3) a mass media campaign to support the designated driver/safe ride home message. Among the heaviest drinkers, the programme significantly increased the use of designated drivers and increased the use of taxis by 63%.

Assessment of truck driver distraction problem and research needs

DOT National Transportation Integrated Search

2005-05-01

The issue of driver distraction associated with the use of in-vehicle devices in heavy vehicles was explored through interviews with truck drivers and safety regulators. In order to characterize some of the interface designs and better understand the...

Uncertainty analysis as essential step in the establishment of the dynamic Design Space of primary drying during freeze-drying.

PubMed

Mortier, Séverine Thérèse F C; Van Bockstal, Pieter-Jan; Corver, Jos; Nopens, Ingmar; Gernaey, Krist V; De Beer, Thomas

2016-06-01

Large molecules, such as biopharmaceuticals, are considered the key driver of growth for the pharmaceutical industry. Freeze-drying is the preferred way to stabilise these products when needed. However, it is an expensive, inefficient, time- and energy-consuming process. During freeze-drying, there are only two main process variables to be set, i.e. the shelf temperature and the chamber pressure, however preferably in a dynamic way. This manuscript focuses on the essential use of uncertainty analysis for the determination and experimental verification of the dynamic primary drying Design Space for pharmaceutical freeze-drying. Traditionally, the chamber pressure and shelf temperature are kept constant during primary drying, leading to less optimal process conditions. In this paper it is demonstrated how a mechanistic model of the primary drying step gives the opportunity to determine the optimal dynamic values for both process variables during processing, resulting in a dynamic Design Space with a well-known risk of failure. This allows running the primary drying process step as time efficient as possible, hereby guaranteeing that the temperature at the sublimation front does not exceed the collapse temperature. The Design Space is the multidimensional combination and interaction of input variables and process parameters leading to the expected product specifications with a controlled (i.e., high) probability. Therefore, inclusion of parameter uncertainty is an essential part in the definition of the Design Space, although it is often neglected. To quantitatively assess the inherent uncertainty on the parameters of the mechanistic model, an uncertainty analysis was performed to establish the borders of the dynamic Design Space, i.e. a time-varying shelf temperature and chamber pressure, associated with a specific risk of failure. A risk of failure acceptance level of 0.01%, i.e. a 'zero-failure' situation, results in an increased primary drying process time compared to the deterministic dynamic Design Space; however, the risk of failure is under control. Experimental verification revealed that only a risk of failure acceptance level of 0.01% yielded a guaranteed zero-defect quality end-product. The computed process settings with a risk of failure acceptance level of 0.01% resulted in a decrease of more than half of the primary drying time in comparison with a regular, conservative cycle with fixed settings. Copyright © 2016. Published by Elsevier B.V.

Let Them Through.... It Could Be You

DOT National Transportation Integrated Search

1996-06-17

A major challenge for designers of ATIS is to design displays that do not overload the driver. This is a particular concern for older drivers who may have decrements in the abilities required for safe driving. To compare information provided by an AT...

Design, development, and evaluation of truck and bus driver wellness programs

DOT National Transportation Integrated Search

2000-06-01

In May 1997, the Federal Motor Carrier Safety Administration (FMCSA) began a research project to design, develop, and evaluate a model truck and bus driver wellness program. This wellness program was developed to provide a resource for addressing tru...

49 CFR 571.126 - Standard No. 126; Electronic stability control systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... driver on the previous ignition cycle that is designed for low-speed, off-road driving, or (b) the... is designed for operation at higher speeds on snow-, sand-, or dirt-packed roads and that has the... dealer, fully fueled, with a 73 kg (160 lb) driver. Standard outriggers shall be designed with a maximum...

76 FR 73006 - General Motors, LLC, Grant of Petition for Decision of Inconsequential Noncompliance

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-28

... the rarest circumstances, the primary function of the PRNDM display is to inform the driver of gear... of shifting errors.'' In all but the rarest circumstances, the primary function of the transmission...

Virtual testing of speed reduction schemes on urban collector roads.

PubMed

Domenichini, Lorenzo; Branzi, Valentina; Meocci, Monica

2018-01-01

Urban collector roads are complex driving environments often encompassing both the mobility and the access road functions. In these conditions motorized traffic and vulnerable road users compete continually. Speed reduction measures may play a relevant role in these contexts, provided that such measures are also designed in compliance with the driver's capabilities and expectations. The paper describes a test procedure using driving simulation experiments, designed to evaluate the reconfiguration project of Via Pistoiese, an urban road collector located in Florence (Italy). The road improvement design consisted of several engineering treatments aimed to reduce and homogenize the driving speed, as well as to manage the co-existence of the different road users and mainly to protect pedestrians. The main focus of the research was to understand if the drivers' behaviour was according to the design hypothesis before the safety treatments are implemented in the real world. Due to the multiple engineering treatments included in the reconfiguration project, the evaluation of the overall safety effectiveness of the project rather than the single treatment safety impact was the main concern of the research study. In addition, the study aimed to assess the usefulness of the considered testing method to understand how to integrate road design with drivers' performances, especially in heterogeneous traffic environments where drivers' behaviour plays a decisive role in the success of the proposed design solutions. Fifty-eight participants drove through two immersive virtual environments, reproducing the existing configuration and the project reconfiguration, while data relating to different driving aspects were collected. Two analyses were performed. The first was focused on the analysis of the mean speed profiles and revealed that the considered engineering treatments are able to control the speeding behaviour without providing a too high discomfort to the drivers. The second analysis was finalized to evaluate the driver's behaviour approaching zebra crossing, evaluating the impact of countermeasures allowing the drivers to perceive in advance a critical situation (a pedestrian that suddenly crossed the street) and consequently to perform a smoother and safer manoeuvre. The experiments confirmed the validity of the considered engineering treatments, allowing expecting the improvement of the traffic safety in via Pistoiese, and support the usefulness of virtual reality experimentations to predict of the safety effectiveness of design solutions, taking into account the drivers' behaviour. Copyright © 2017 Elsevier Ltd. All rights reserved.

Seasonal distribution of net primary production by functional groups in Chihuahuan Desert, and the role of seasonal precipitation

USDA-ARS?s Scientific Manuscript database

In hot deserts, precipitation is the principal driver for net primary production.  This study tested two hypotheses regarding aboveground net primary production (ANPP) and the effects of precipitation on ANPP in the Chihuahuan Desert, with emphasis on differences among seasons and among functional g...

Climatic controls of aboveground net primary production in semi-arid grasslands along a latitudinal gradient portend low sensitivity to warming

USDA-ARS?s Scientific Manuscript database

Although climate models forecast warmer temperatures with a high degree of certainty, precipitation is the primary driver of aboveground net primary productivity (ANPP) in most grasslands. In contrast, variations in temperature seldom are related to patterns of ANPP. Thus forecasting responses to wa...

Designing Fatigue Warning Systems: The perspective of professional drivers.

PubMed

Meng, Fanxing; Li, Shuling; Cao, Lingzhi; Peng, Qijia; Li, Musen; Wang, Chunhui; Zhang, Wei

2016-03-01

Professional drivers have been characterized as experiencing heavy fatigue resulting from long driving time in their daily work. This study aimed to explore the potential demand of Fatigue Warning Systems (FWSs) among professional drivers as a means of reducing the danger of fatigue driving and to examine their opinions regarding the design of FWSs. Six focus groups with 35 participants and a questionnaire survey with 600 respondents were conducted among Chinese truck and taxi drivers to collect qualitative and quantitative data concerning the current situation of fatigue driving and opinions regarding the design of FWSs. The results revealed that both truck and taxi drivers had a positive attitude toward FWSs, and they hoped this system could not only monitor and warn them regarding their fatigue but also somewhat relieve their fatigue before they could stop and rest. As for warning signals, participants preferred auditory warnings, as opposed to visual, vibrotactile or electric stimuli. Interestingly, it was proposed that verbal warnings involving the information regarding consequences of fatigue driving or the wishes of drivers' family members would be more effective. Additionally, different warning patterns, including graded, single and continuous warnings, were discussed in the focus group. Finally, the participants proposed many other suggestions, as well as their concerns regarding FWSs, which will provide valuable information for companies who wish to develop FWSs for professional drivers. Copyright © 2015. Published by Elsevier Ltd.

Understanding driver performance variability and perception of risk : driver hazard perception research plan

DOT National Transportation Integrated Search

1998-01-01

The objectives of this research project were to develop a comprehensive and clearly defined research program to define, : measure, and quantify driver perception of hazards as it relates to highway design, operations, and safety, standards This was :...

Factors driving physician-hospital alignment in orthopaedic surgery.

PubMed

Page, Alexandra E; Butler, Craig A; Bozic, Kevin J

2013-06-01

The relationships between physicians and hospitals are viewed as central to the proposition of delivering high-quality health care at a sustainable cost. Over the last two decades, major changes in the scope, breadth, and complexities of these relationships have emerged. Despite understanding the need for physician-hospital alignment, identification and understanding the incentives and drivers of alignment prove challenging. Our review identifies the primary drivers of physician alignment with hospitals from both the physician and hospital perspectives. Further, we assess the drivers more specific to motivating orthopaedic surgeons to align with hospitals. We performed a comprehensive literature review from 1992 to March 2012 to evaluate published studies and opinions on the issues surrounding physician-hospital alignment. Literature searches were performed in both MEDLINE(®) and Health Business™ Elite. Available literature identifies economic and regulatory shifts in health care and cultural factors as primary drivers of physician-hospital alignment. Specific to orthopaedics, factors driving alignment include the profitability of orthopaedic service lines, the expense of implants, and issues surrounding ambulatory surgery centers and other ancillary services. Evolving healthcare delivery and payment reforms promote increased collaboration between physicians and hospitals. While economic incentives and increasing regulatory demands provide the strongest drivers, cultural changes including physician leadership and changing expectations of work-life balance must be considered when pursuing successful alignment models. Physicians and hospitals view each other as critical to achieving lower-cost, higher-quality health care.

State all-driver distracted driving laws and high school students'  texting while driving behavior.

PubMed

Qiao, Nan; Bell, Teresa Maria

2016-01-01

Texting while driving is highly prevalent among adolescents and young adults in the United States. Texting while driving can significantly increase the risk of road crashes and is associated with other risky driving behaviors. Most states have enacted distracted driving laws to prohibit texting while driving. This study examines effects of different all-driver distracted driving laws on texting while driving among high school students. High school student data were extracted from the 2013 National Youth Risk Behavior Survey. Distracted driving law information was collected from the National Conference of State Legislatures. The final sample included 6,168 high school students above the restricted driving age in their states and with access to a vehicle. Logistic regression was applied to estimate odds ratios of laws on texting while driving. All-driver text messaging bans with primary enforcement were associated with a significant reduction in odds of texting while driving among high school students (odds ratio = 0.703; 95% confidence interval, 0.513-0.964), whereas all-driver phone use bans with primary enforcement did not have a significant association with texting while driving (odds ratio = 0.846; 95% confidence interval, 0.501-1.429). The findings indicate that all-driver distracted driving laws that specifically target texting while driving as opposed to all types of phone use are effective in reducing the behavior among high school students.

Advanced structural design for precision radial velocity instruments

NASA Astrophysics Data System (ADS)

Baldwin, Dan; Szentgyorgyi, Andrew; Barnes, Stuart; Bean, Jacob; Ben-Ami, Sagi; Brennan, Patricia; Budynkiewicz, Jamie; Chun, Moo-Young; Conroy, Charlie; Crane, Jeffrey D.; Epps, Harland; Evans, Ian; Evans, Janet; Foster, Jeff; Frebel, Anna; Gauron, Thomas; Guzman, Dani; Hare, Tyson; Jang, Bi-Ho; Jang, Jeong-Gyun; Jordan, Andres; Kim, Jihun; Kim, Kang-Min; Mendes de Oliveira, Claudia; Lopez-Morales, Mercedes; McCracken, Kenneth; McMuldroch, Stuart; Miller, Joseph; Mueller, Mark; Oh, Jae Sok; Ordway, Mark; Park, Byeong-Gon; Park, Chan; Park, Sung-Joon; Paxson, Charles; Phillips, David; Plummer, David; Podgorski, William; Seifahrt, Andreas; Stark, Daniel; Steiner, Joao; Uomoto, Alan; Walsworth, Ronald; Yu, Young-Sam

2016-07-01

The GMT-Consortium Large Earth Finder (G-CLEF) is an echelle spectrograph with precision radial velocity (PRV) capability that will be a first light instrument for the Giant Magellan Telescope (GMT). G-CLEF has a PRV precision goal of 40 cm/sec (10 cm/s for multiple measurements) to enable detection of Earth-like exoplanets in the habitable zones of sun-like stars1. This precision is a primary driver of G-CLEF's structural design. Extreme stability is necessary to minimize image motions at the CCD detectors. Minute changes in temperature, pressure, and acceleration environments cause structural deformations, inducing image motions which degrade PRV precision. The instrument's structural design will ensure that the PRV goal is achieved under the environments G-CLEF will be subjected to as installed on the GMT azimuth platform, including: Millikelvin (0.001 °K) thermal soaks and gradients 10 millibar changes in ambient pressure Changes in acceleration due to instrument tip/tilt and telescope slewing Carbon fiber/cyanate composite was selected for the optical bench structure in order to meet performance goals. Low coefficient of thermal expansion (CTE) and high stiffness-to-weight are key features of the composite optical bench design. Manufacturability and serviceability of the instrument are also drivers of the design. In this paper, we discuss analyses leading to technical choices made to minimize G-CLEF's sensitivity to changing environments. Finite element analysis (FEA) and image motion sensitivity studies were conducted to determine PRV performance under operational environments. We discuss the design of the optical bench structure to optimize stiffness-to-weight and minimize deformations due to inertial and pressure effects. We also discuss quasi-kinematic mounting of optical elements and assemblies, and optimization of these to ensure minimal image motion under thermal, pressure, and inertial loads expected during PRV observations.

Guidelines for Developing Spacecraft Structural Requirements: A Thermal and Environmental Perspective

NASA Technical Reports Server (NTRS)

Holladay, Jon; Day, Greg; Gill, Larry

2004-01-01

Spacecraft are typically designed with a primary focus on weight in order to meet launch vehicle performance parameters. However, for pressurized and/or man-rated spacecraft, it is also necessary to have an understanding of the vehicle operating environments to properly size the pressure vessel. Proper sizing of the pressure vessel requires an understanding of the space vehicle's life cycle and compares the physical design optimization (weight and launch "cost") to downstream operational complexity and total life cycle cost. This paper will provide an overview of some major environmental design drivers and provide examples for calculating the optimal design pressure versus a selected set of design parameters related to thermal and environmental perspectives. In addition, this paper will provide a generic set of cracking pressures for both positive and negative pressure relief valves that encompasses worst case environmental effects for a variety of launch / landing sites. Finally, several examples are included to highlight pressure relief set points and vehicle weight impacts for a selected set of orbital missions.

Large-scale functional brain network changes in taxi drivers: evidence from resting-state fMRI.

PubMed

Wang, Lubin; Liu, Qiang; Shen, Hui; Li, Hong; Hu, Dewen

2015-03-01

Driving a car in the environment is a complex behavior that involves cognitive processing of visual information to generate the proper motor outputs and action controls. Previous neuroimaging studies have used virtual simulation to identify the brain areas that are associated with various driving-related tasks. Few studies, however, have focused on the specific patterns of functional organization in the driver's brain. The aim of this study was to assess differences in the resting-state networks (RSNs) of the brains of drivers and nondrivers. Forty healthy subjects (20 licensed taxi drivers, 20 nondrivers) underwent an 8-min resting-state functional MRI acquisition. Using independent component analysis, three sensory (primary and extrastriate visual, sensorimotor) RSNs and four cognitive (anterior and posterior default mode, left and right frontoparietal) RSNs were retrieved from the data. We then examined the group differences in the intrinsic brain activity of each RSN and in the functional network connectivity (FNC) between the RSNs. We found that the drivers had reduced intrinsic brain activity in the visual RSNs and reduced FNC between the sensory RSNs compared with the nondrivers. The major finding of this study, however, was that the FNC between the cognitive and sensory RSNs became more positively or less negatively correlated in the drivers relative to that in the nondrivers. Notably, the strength of the FNC between the left frontoparietal and primary visual RSNs was positively correlated with the number of taxi-driving years. Our findings may provide new insight into how the brain supports driving behavior. © 2014 Wiley Periodicals, Inc.

Computer Program Development Specification for Ada Integrated Environment. Ada Compiler Phases B5-AIE (1). COMP (1).

DTIC Science & Technology

1982-11-05

routines required by the Back End. 3.3 Detailed Functional Requirements 3.3.1 Front End 3.3.1.1 DRIVER The DRIVER is the primary user interface to the...Main 2. Exam ple" !.i ,, , ,vari able • id -: go for B Boolean Ai ’ A" ’ I type d 1 I , for Boolean I (from Standard) i I - - for A function i fuction ...TN in. If a TN cannot be allocated to the primary area of storage it needs(such as a register) it is allocated to the spill area reserved in the local

Device and method for redirecting electromagnetic signals

DOEpatents

Garcia, Ernest J.

1999-01-01

A device fabricated to redirect electromagnetic signals, the device including a primary driver adapted to provide a predetermined force, a linkage system coupled to the primary driver, a pusher rod rotationally coupled to the linkage system, a flexible rod element attached to the pusher rod and adapted to buckle upon the application of the predetermined force, and a mirror structure attached to the flexible rod element at one end and to the substrate at another end. When the predetermined force buckles the flexible rod element, the mirror structure and the flexible rod element both move to thereby allow a remotely-located electromagnetic signal directed towards the device to be redirected.

Driver training interests of a Spanish sample of young drivers and its relationship with their self-assessment skills concerning risky driving behavior.

PubMed

Molina, J Gabriel; Sanmartín, Jaime; Keskinen, Esko

2013-03-01

Poor driving self-assessment skills (e.g., over-confidence) have been pointed out as an important explanatory factor behind young drivers' accident involvement. This paper explores (1) what young drivers miss in their training as drivers in order to analyze whether an assessment of one's own driving skills plays an important role in their desire to improve as drivers, and (2) how these training interests are related to an estimate of their self-assessment skills concerning risky driving behavior. For this purpose, a study was conducted using a survey with a blocked sampling design of novice drivers. The survey solicited respondents' self-report about (1) the contents of training courses that they feel would improve their driving, (2) their risky driving behavior, and (3) their likelihood of being involved in a risky driving situation. From the initial sample invited to participate, of nearly 1300 people, we finally obtained complete data from 321 young Spanish drivers. Two main results were apparent from our data analysis: (1) the novice drivers were mainly interested in improving their ability to recognize their strengths and weaknesses as drivers (i.e., self-assessment skills); (2) a significant relationship was found between novice drivers' interests and their current self-assessment skills concerning risky driving behavior. Specifically, there was greater general interest expressed in post-license training by the under-confident self-assessors than the over-confident ones. These results provide a relevant input which should be taken into account when designing driver training programs for novice drivers. Moreover, the relationship between their training interests and their risky driving self-assessment skills introduces an additional factor to be considered in the implementation of these training programs. Copyright © 2012 Elsevier Ltd. All rights reserved.

Investigating the value of time and value of reliability for managed lanes : [summary].

DOT National Transportation Integrated Search

2015-09-01

Managed lanes employ various operational and design strategies to improve highway : efficiency by moving traffic to lanes that are restricted, for example, to drivers with one or : more passengers or to drivers that pay a fee. A drivers decision t...

Post driver for steel guardrail posts : final report.

DOT National Transportation Integrated Search

2003-01-01

The objective of this research project was to locate an existing product, or if necessary, design and develop a product for use as a driver for steel guardrail posts. The post driver would also be able to minimize the bending and twisting of the stee...

Modelling the influence of sensory dynamics on linear and nonlinear driver steering control

NASA Astrophysics Data System (ADS)

Nash, C. J.; Cole, D. J.

2018-05-01

A recent review of the literature has indicated that sensory dynamics play an important role in the driver-vehicle steering task, motivating the design of a new driver model incorporating human sensory systems. This paper presents a full derivation of the linear driver model developed in previous work, and extends the model to control a vehicle with nonlinear tyres. Various nonlinear controllers and state estimators are compared with different approximations of the true system dynamics. The model simulation time is found to increase significantly with the complexity of the controller and state estimator. In general the more complex controllers perform best, although with certain vehicle and tyre models linearised controllers perform as well as a full nonlinear optimisation. Various extended Kalman filters give similar results, although the driver's sensory dynamics reduce control performance compared with full state feedback. The new model could be used to design vehicle systems which interact more naturally and safely with a human driver.

FInal Technical Repot of the Project: Design and Implementation of Low-Power 10Gb/s/channel Laser/Silicon Photonics Modulator Drivers with SEU Tolerance for HL-LHC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gui, Ping

During the funding period of this award from May 1, 2014 through March 30, 2016, we have accomplished the design, implementation and measurement results of two laser driver chips: LpGBLD10+ which is a low-power single-channel 10Gb/s laser driver IC, and LDQ10P, which is a 4x10Gb/s driver array chip for High Energy Physics (HEP) applications. With new circuit techniques, the driver consumes a record-low power consumption, 31 mW @10Gb/s/channel and occupies a small area of 400 µm × 1750 µm for the single-channel driver IC and 1900umx1700um for the LDQ10P chip. These characteristics allow for both the LpGBLD10+ ICs and LDQ10P suitable candidatemore » for the Versatile Link PLUS (VL+) project, offering flexibility in configuring multiple Transmitters and receivers.« less

77 FR 11199 - Visual-Manual NHTSA Driver Distraction Guidelines for In-Vehicle Electronic Devices

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-24

...The National Highway Traffic Safety Administration (NHTSA) is concerned about the effects of distraction due to drivers' use of electronic devices on motor vehicle safety. Consequently, NHTSA is issuing nonbinding, voluntary NHTSA Driver Distraction Guidelines (NHTSA Guidelines) to promote safety by discouraging the introduction of excessively distracting devices in vehicles. This notice details the contents of the first phase of the NHTSA Driver Distraction Guidelines. These NHTSA Guidelines cover original equipment in-vehicle device secondary tasks (communications, entertainment, information gathering, and navigation tasks not required to drive are considered secondary tasks) performed by the driver through visual-manual means (meaning the driver looking at a device, manipulating a device-related control with the driver's hand, and watching for visual feedback). The proposed NHTSA Guidelines list certain secondary, non-driving related tasks that, based on NHTSA's research, are believed by the agency to interfere inherently with a driver's ability to safely control the vehicle. The Guidelines recommend that those in-vehicle devices be designed so that they cannot be used by the driver to perform such tasks while the driver is driving. For all other secondary, non-driving-related visual-manual tasks, the NHTSA Guidelines specify a test method for measuring the impact of task performance on driving safety while driving and time-based acceptance criteria for assessing whether a task interferes too much with driver attention to be suitable to perform while driving. If a task does not meet the acceptance criteria, the NHTSA Guidelines recommend that in- vehicle devices be designed so that the task cannot be performed by the driver while driving. In addition to identifying inherently distracting tasks and providing a means for measuring and evaluating the level of distraction associated with other non-driving-related tasks, the NHTSA Guidelines contain several design recommendations for in-vehicle devices in order to minimize their potential for distraction. NHTSA seeks comments on these NHTSA Guidelines and any suggestions for how to improve them so as to better enhance motor vehicle safety.

Analytical Formulation for Sizing and Estimating the Dimensions and Weight of Wind Turbine Hub and Drivetrain Components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Y.; Parsons, T.; King, R.

This report summarizes the theory, verification, and validation of a new sizing tool for wind turbine drivetrain components, the Drivetrain Systems Engineering (DriveSE) tool. DriveSE calculates the dimensions and mass properties of the hub, main shaft, main bearing(s), gearbox, bedplate, transformer if up-tower, and yaw system. The level of fi¬ delity for each component varies depending on whether semiempirical parametric or physics-based models are used. The physics-based models have internal iteration schemes based on system constraints and design criteria. Every model is validated against available industry data or finite-element analysis. The verification and validation results show that the models reasonablymore » capture primary drivers for the sizing and design of major drivetrain components.« less

Understanding the Lunar System Architecture Design Space

NASA Technical Reports Server (NTRS)

Arney, Dale C.; Wilhite, Alan W.; Reeves, David M.

2013-01-01

Based on the flexible path strategy and the desire of the international community, the lunar surface remains a destination for future human exploration. This paper explores options within the lunar system architecture design space, identifying performance requirements placed on the propulsive system that performs Earth departure within that architecture based on existing and/or near-term capabilities. The lander crew module and ascent stage propellant mass fraction are primary drivers for feasibility in multiple lander configurations. As the aggregation location moves further out of the lunar gravity well, the lunar lander is required to perform larger burns, increasing the sensitivity to these two factors. Adding an orbit transfer stage to a two-stage lunar lander and using a large storable stage for braking with a one-stage lunar lander enable higher aggregation locations than Low Lunar Orbit. Finally, while using larger vehicles enables a larger feasible design space, there are still feasible scenarios that use three launches of smaller vehicles.

Magnetic induction tomography of objects for security applications

NASA Astrophysics Data System (ADS)

Ward, Rob; Joseph, Max; Langley, Abbi; Taylor, Stuart; Watson, Joe C.

2017-10-01

A coil array imaging system has been further developed from previous investigations, focusing on designing its application for fast screening of small bags or parcels, with a view to the production of a compact instrument for security applications. In addition to reducing image acquisition times, work was directed toward exploring potential cost effective manufacturing routes. Based on magnetic induction tomography and eddy-current principles, the instrument captured images of conductive targets using a lock-in amplifier, individually multiplexing signals between a primary driver coil and a 20 by 21 imaging array of secondary passive coils constructed using a reproducible multiple tile design. The design was based on additive manufacturing techniques and provided 2 orthogonal imaging planes with an ability to reconstruct images in less than 10 seconds. An assessment of one of the imaging planes is presented. This technique potentially provides a cost effective threat evaluation technique that may compliment conventional radiographic approaches.

Pixel parallel localized driver design for a 128 x 256 pixel array 3D 1Gfps image sensor

NASA Astrophysics Data System (ADS)

Zhang, C.; Dao, V. T. S.; Etoh, T. G.; Charbon, E.

2017-02-01

In this paper, a 3D 1Gfps BSI image sensor is proposed, where 128 × 256 pixels are located in the top-tier chip and a 32 × 32 localized driver array in the bottom-tier chip. Pixels are designed with Multiple Collection Gates (MCG), which collects photons selectively with different collection gates being active at intervals of 1ns to achieve 1Gfps. For the drivers, a global PLL is designed, which consists of a ring oscillator with 6-stage current starved differential inverters, achieving a wide frequency tuning range from 40MHz to 360MHz (20ps rms jitter). The drivers are the replicas of the ring oscillator that operates within a PLL. Together with level shifters and XNOR gates, continuous 3.3V pulses are generated with desired pulse width, which is 1/12 of the PLL clock period. The driver array is activated by a START signal, which propagates through a highly balanced clock tree, to activate all the pixels at the same time with virtually negligible skew.

SBCDDB: Sleeping Beauty Cancer Driver Database for gene discovery in mouse models of human cancers

PubMed Central

Mann, Michael B

2018-01-01

Abstract Large-scale oncogenomic studies have identified few frequently mutated cancer drivers and hundreds of infrequently mutated drivers. Defining the biological context for rare driving events is fundamentally important to increasing our understanding of the druggable pathways in cancer. Sleeping Beauty (SB) insertional mutagenesis is a powerful gene discovery tool used to model human cancers in mice. Our lab and others have published a number of studies that identify cancer drivers from these models using various statistical and computational approaches. Here, we have integrated SB data from primary tumor models into an analysis and reporting framework, the Sleeping Beauty Cancer Driver DataBase (SBCDDB, http://sbcddb.moffitt.org), which identifies drivers in individual tumors or tumor populations. Unique to this effort, the SBCDDB utilizes a single, scalable, statistical analysis method that enables data to be grouped by different biological properties. This allows for SB drivers to be evaluated (and re-evaluated) under different contexts. The SBCDDB provides visual representations highlighting the spatial attributes of transposon mutagenesis and couples this functionality with analysis of gene sets, enabling users to interrogate relationships between drivers. The SBCDDB is a powerful resource for comparative oncogenomic analyses with human cancer genomics datasets for driver prioritization. PMID:29059366

It Comes With the Job: Work Organizational, Job Design, and Self-Regulatory Barriers to Improving the Health Status of Train Drivers.

PubMed

Naweed, Anjum; Chapman, Janine; Allan, Matthew; Trigg, Joshua

2017-03-01

This study aimed to examine the impacts of key barriers to improving the occupational health status of Australian train drivers. From May to June, 2015, five semi-structured qualitative focus groups were conducted with 29 train drivers from South Australian, Victorian, and New South Wales-based rail organizations in Australia. Occupational health was impeded by multiple barriers regarding sleep (patterns/fatigue), diet (planning/context), mental health (occupational stress), rostering (low autonomy), sedentary time, low fitness motivation, and family/social life conflicts. Work organizational barriers included communication issues, low organizational support, and existing social norms. Job design barriers included rostering, fatigue, stimulant reliance, and family/social life imbalances. Self-regulatory barriers included dietary and exercise patterns habits and patterns. Occupational health interventions for Australian train drivers must address work organizational, job design, and self-regulatory barriers to healthier lifestyle behaviors.

Improvement of older driver safety through self-evaluation : the development of a self-evaluation instrument

DOT National Transportation Integrated Search

2000-03-01

This research project was designed to increase safety in the older driver population by developing and testing a self-evaluation instrument. The instrument is intended for drivers who may be starting to experience declines in driving abilities or los...

Emergency Vehicle Alarm System for Deaf Drivers by Using LEDs and Vibration Devices

NASA Astrophysics Data System (ADS)

Kuwahara, Noriaki; Morimoto, Kazunari; Kozuki, Kazumasa; Kawamura, Tomonori

We are developing the emergency vehicle alarm system for deaf drivers by using LEDs and vibration devices. In order to design the alarm for deaf drivers, we have conducted basic experiment in order to evaluate perceptual characteristic on visibility of LED.

Modeling of Steer-by-Wire System Used in New Braking Handwheel Concept

NASA Astrophysics Data System (ADS)

Messaoudène, K.; Oufroukh, N. Ait; Mammar, S.

2008-06-01

The handwheel is one of the primary control mechanisms of automobile thus interaction between the handwheel and the driver is critical to safety. The driver applies forces that direct the vehicle while the handwheel communicates feedback information to the driver of the forces experience by the car within its environment. The handwheel also provides a predictable mechanical feel to the driver to allow smooth and safe control. Many researchers tried to reproduce this feeling by creating steer-by-wire systems. This paper explores this new concept of handwheel and it describes the modeling steps of the components including the restitution mechanism for force feedback and its various links with the vehicle lateral dynamics and the pneumatic contacts. The aim is to explore the possibility to combine a braking device within the steer-by-wire system in order to provide a more suitable and ergonomic device to the driver.

[Occupational risk factors and perceptions of air pollution by motorcycle taxi drivers in Cotonou, Benin].

PubMed

Lawin, Hervé; Ayi Fanou, Lucie; Hinson, Vikkey; Tollo, Brice; Fayomi, Benjamin; Ouendo, Edgard-Marius

Motorcycle taxis occupy a major place in urban transport. Motorcycle taxi drivers are exposed to occupational risk factors (ORF) including air pollution. The objective of this study was to evaluate these ORF among motorcycle taxi drivers and their perceptions of air pollution. This mixed study was conducted on motorcycle taxi drivers in Cotonou. The qualitative study was based on focus groups concerning 16 items from the Participatory Occupational Risk Screening Guide (DEPARIS) until saturation and after triangulation of data. The quantitative study consisted of administering a questionnaire addressing socioeconomic and demographic characteristics, cardiopulmonary diseases, and perception of air -pollution risk factors among 397 Cotonou motorcycle taxi drivers. Drivers perceived poor road conditions, effort and handling, and lack of social security as unsatisfactory ORF. Their mean age was 40.95 ± 8.75 years and 45.84% had primary -education. They had been working as motorcycle taxi drivers for an average of 134.95 ± 101.53 months with an average income of FCFA 3138 ± 1238. These occupational factors were significantly associated with cardiopulmonary disorders, observed in 63.2% of drivers. Less than 1/3 of drivers felt that air pollution affected their personal health. Motorcycle taxi drivers have a poor perception of ORF and the severity of exposure to air pollution in this occupation. There is a need to take action to promote the health of this population.

Development of compact rapid charging power supply for capacitive energy storage in pulsed power drivers.

PubMed

Sharma, Surender Kumar; Shyam, Anurag

2015-02-01

High energy capacitor bank is used for primary electrical energy storage in pulsed power drivers. The capacitors used in these pulsed power drivers have low inductance, low internal resistance, and less dc life, so it has to be charged rapidly and immediately discharged into the load. A series resonant converter based 45 kV compact power supply is designed and developed for rapid charging of the capacitor bank with constant charging current up to 150 mA. It is short circuit proof, and zero current switching technique is used to commute the semiconductor switch. A high frequency resonant inverter switching at 10 kHz makes the overall size small and reduces the switching losses. The output current of the power supply is limited by constant on-time and variable frequency switching control technique. The power supply is tested by charging the 45 kV/1.67 μF and 15 kV/356 μF capacitor banks. It has charged the capacitor bank up to rated voltage with maximum charging current of 150 mA and the average charging rate of 3.4 kJ/s. The output current of the power supply is limited by reducing the switching frequency at 5 kHz, 3.3 kHz, and 1.7 kHz and tested with 45 kV/1.67 μF capacitor bank. The protection circuit is included in the power supply for over current, under voltage, and over temperature. The design details and the experimental testing results of the power supply for resonant current, output current, and voltage traces of the power supply with capacitive, resistive, and short circuited load are presented and discussed.

Driver Vision Based Perception-Response Time Prediction and Assistance Model on Mountain Highway Curve.

PubMed

Li, Yi; Chen, Yuren

2016-12-30

To make driving assistance system more humanized, this study focused on the prediction and assistance of drivers' perception-response time on mountain highway curves. Field tests were conducted to collect real-time driving data and driver vision information. A driver-vision lane model quantified curve elements in drivers' vision. A multinomial log-linear model was established to predict perception-response time with traffic/road environment information, driver-vision lane model, and mechanical status (last second). A corresponding assistance model showed a positive impact on drivers' perception-response times on mountain highway curves. Model results revealed that the driver-vision lane model and visual elements did have important influence on drivers' perception-response time. Compared with roadside passive road safety infrastructure, proper visual geometry design, timely visual guidance, and visual information integrality of a curve are significant factors for drivers' perception-response time.

Specifying Software Behavior for Requirements and Design

DTIC Science & Technology

2013-01-01

e.g., Behavior Hiding is comprised of the Function Driver and Shared Services modules. Blacked-out modules, which are concerned with mechanisms for...and Shared Services modules. “The Func- tion Driver Module consists of a set of modules called Func- tion Drivers; each Function Driver is the sole...system environment. Functions that capture the rules determining these output values specify that behavior. The Shared Services module concerns aspects of

Assessing contextual factors that influence acceptance of pedestrian alerts by a night vision system.

PubMed

Källhammer, Jan-Erik; Smith, Kip

2012-08-01

We investigated five contextual variables that we hypothesized would influence driver acceptance of alerts to pedestrians issued by a night vision active safety system to inform the specification of the system's alerting strategies. Driver acceptance of automotive active safety systems is a key factor to promote their use and implies a need to assess factors influencing driver acceptance. In a field operational test, 10 drivers drove instrumented vehicles equipped with a preproduction night vision system with pedestrian detection software. In a follow-up experiment, the 10 drivers and 25 additional volunteers without experience with the system watched 57 clips with pedestrian encounters gathered during the field operational test. They rated the acceptance of an alert to each pedestrian encounter. Levels of rating concordance were significant between drivers who experienced the encounters and participants who did not. Two contextual variables, pedestrian location and motion, were found to influence ratings. Alerts were more accepted when pedestrians were close to or moving toward the vehicle's path. The study demonstrates the utility of using subjective driver acceptance ratings to inform the design of active safety systems and to leverage expensive field operational test data within the confines of the laboratory. The design of alerting strategies for active safety systems needs to heed the driver's contextual sensitivity to issued alerts.

The effects of social interactions with in-vehicle agents on a driver's anger level, driving performance, situation awareness, and perceived workload.

PubMed

Jeon, Myounghoon; Walker, Bruce N; Gable, Thomas M

2015-09-01

Research has suggested that interaction with an in-vehicle software agent can improve a driver's psychological state and increase road safety. The present study explored the possibility of using an in-vehicle software agent to mitigate effects of driver anger on driving behavior. After either anger or neutral mood induction, 60 undergraduates drove in a simulator with two types of agent intervention. Results showed that both speech-based agents not only enhance driver situation awareness and driving performance, but also reduce their anger level and perceived workload. Regression models show that a driver's anger influences driving performance measures, mediated by situation awareness. The practical implications include design guidelines for the design of social interaction with in-vehicle software agents. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Towards a social psychology-based microscopic model of driver behavior and decision-making : modifying Lewin's field theory

DOT National Transportation Integrated Search

2014-01-01

Central to effective roadway design is the ability to understand how drivers behave as they traverse a segment of : roadway. While simple and complex microscopic models have been used over the years to analyse driver behaviour, : most models: 1.) inc...

California's Bus Driver's Training Course. Instructor's Manual.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento.

This instructor's manual was designed to help graduates of the California Bus Driver Instructor Course provide effective instruction to school bus driver trainees. It contains enough material for 20-30 hours of classroom training. The information is organized in 12 instructional units that cover the following topics: introduction to the course;…

Takeover Time in Highly Automated Vehicles: Noncritical Transitions to and From Manual Control.

PubMed

Eriksson, Alexander; Stanton, Neville A

2017-06-01

The aim of this study was to review existing research into driver control transitions and to determine the time it takes drivers to resume control from a highly automated vehicle in noncritical scenarios. Contemporary research has moved from an inclusive design approach to adhering only to mean/median values when designing control transitions in automated driving. Research into control transitions in highly automated driving has focused on urgent scenarios where drivers are given a relatively short time span to respond to a request to resume manual control. We found a paucity in research into more frequent scenarios for control transitions, such as planned exits from highway systems. Twenty-six drivers drove two scenarios with an automated driving feature activated. Drivers were asked to read a newspaper, or to monitor the system, and to relinquish, or resume, control from the automation when prompted by vehicle systems. Significantly longer control transition times were found between driving with and without secondary tasks. Control transition times were substantially longer than those reported in the peer-reviewed literature. We found that drivers take longer to resume control when under no time pressure compared with that reported in the literature. Moreover, we found that drivers occupied by a secondary task exhibit larger variance and slower responses to requests to resume control. Workload scores implied optimal workload. Intra- and interindividual differences need to be accommodated by vehicle manufacturers and policy makers alike to ensure inclusive design of contemporary systems and safety during control transitions.

Comprehending Consumption: The Behavioral Basis and Implementation of Driver Feedback for Reducing Vehicle Energy Use

NASA Astrophysics Data System (ADS)

Stillwater, Tai

A large body of evidence suggests that drivers who receive real-time fuel economy information can increase their vehicle fuel economy by 5%, a process commonly known as ecodriving. However, few studies have directly addressed the human side of the feedback, that is, why drivers would (or would not) be motivated to change their behavior and how to design feedback devices to maximize the motivation to ecodrive. This dissertation approaches the question using a mixed qualitative and quantitative approach to explore driver responses and psychology as well as to quantify the process of behavior change. The first chapter discusses the use of mile-per-gallon fuel economy as a metric for driver feedback and finds that an alternative energy economy metric is superior for real-time feedback. The second chapter reviews behavioral theories and proposes a number of practical solutions for the ecodriving context. In the third chapter the theory of planned behavior is tested against driver responses to an existing feedback system available in the 2008 model Toyota Prius. The fourth chapter presents a novel feedback design based on behavioral theories and drivers' responses to the feedback. Finally, chapter five presents the quantitative results of a natural-driving study of fuel economy feedback. The dissertation findings suggest that behavior theories such as the Theory of Planned Behavior can provide important improvements to existing feedback designs. In addition, a careful analysis of vehicle energy flows indicates that the mile-per-gallon metric is deeply flawed as a real-time feedback metric, and should be replaced. Chapters 2 and 3 conclude that behavior theories have both a theoretical and highly practical role in feedback design, although the driving context requires just as much care in the application. Chapters 4 and 5 find that a theory-inspired interface provides drivers with engaging and motivating feedback, and that integrating personal goal into the feedback is the most motivating theory-based addition. Finally, the behavioral model results in chapter 5 suggest that driver goals not only influence in-vehicle energy use, but are themselves flexible constructs that can be directly influenced by energy feedback.

A contemporary approach to the prevention of peritoneal dialysis-related peritonitis in children: the role of improvement science.

PubMed

Redpath Mahon, Allison; Neu, Alicia M

2017-08-01

Peritonitis is a leading cause of hospitalizations, morbidity, and modality change in pediatric chronic peritoneal dialysis (CPD) patients. Despite guidelines published by the International Society for Peritoneal Dialysis aimed at reducing the risk of peritonitis, registry data have revealed significant variability in peritonitis rates among centers caring for children on CPD, which suggests variability in practice. Improvement science methods have been used to reduce a variety of healthcare-associated infections and are also being applied successfully to decrease rates of peritonitis in children. A successful quality improvement program with the goal of decreasing peritonitis will not only include primary drivers directly linked to the outcome of peritonitis, but will also direct attention to secondary drivers that are important for the achievement of primary drivers, such as health literacy and patient and family engagement strategies. In this review, we describe a comprehensive improvement science model for the reduction of peritonitis in pediatric patients on CPD.

Translation to Primary Care of an Effective Teen Safe Driving Program for Parents.

PubMed

Shope, Jean T; Zakrajsek, Jennifer S; Finch, Stacia; Bingham, C Raymond; O'Neil, Joseph; Yano, Stephen; Wasserman, Richard; Simons-Morton, Bruce

2016-10-01

Addressing teen driver crashes, this study adapted an effective Checkpoints(TM) program for parents of teen drivers for dissemination by primary care practitioners (PCPs) and the web; distributed the PCP/web program through pediatric practices; and examined dissemination to/implementation by parents. The website, youngDRIVERparenting.org, and brief intervention protocol were developed. PCPs delivered interventions and materials to parents, referred them to the website, and completed follow-up surveys. Google Analytics assessed parents' website use. Most PCPs reported delivering interventions with fidelity, and thought the program important and feasible. Brief interventions/website referrals, averaging 4.4 minutes, were delivered to 3465 (87%) of 3990 eligible parents by 133 PCPs over an 18-week average. Website visits (1453) were made by 42% of parents, who spent on average 3:53 minutes viewing 4.2 topics. This program costs little (its website, training and promotional materials are available) and could be one component of a comprehensive approach to reducing teen driver crashes. © The Author(s) 2016.

A novel approach to the design of a needle driver with multiple DOFs for pediatric laparoscopic surgery.

PubMed

Fujii, Masahiro; Sugita, Naohiko; Ishimaru, Tetsuya; Iwanaka, Tadashi; Mitsuishi, Mamoru

2013-02-01

The objective of our research was to design and develop a novel needle driver with multiple degrees of freedom (DOFs) for pediatric laparoscopic surgery. Pediatric laparoscopic surgery has many advantages for patients, but the difficulty of the operation is increased due to many restrictions. For example, the motion of the needle driver is restricted by the insertion points, and the operation workspace is smaller in children than in adults. A needle driver with 3 DOFs and a 3.5-mm diameter is proposed and implemented in this study. Grasping DOF is achieved using a piston mechanism actuated by a wire. Deflection and rotation DOFs are actuated by gears. Experiments were conducted to evaluate the workspace and ligation force, and the results confirmed that the needle driver meets all the necessary requirements. Finally, a first reaction of a pediatric surgeon on the suturing and ligaturing capabilities of the prototype is reported. A multi-DOF needle driver with a new mechanism was proposed for pediatric laparoscopic surgery and a first prototype was developed. It is expected that further elaboration of the developed first prototype of the needle driver may contribute to the advancement of pediatric laparoscopic surgery.

Design of a Fatigue Detection System for High-Speed Trains Based on Driver Vigilance Using a Wireless Wearable EEG.

PubMed

Zhang, Xiaoliang; Li, Jiali; Liu, Yugang; Zhang, Zutao; Wang, Zhuojun; Luo, Dianyuan; Zhou, Xiang; Zhu, Miankuan; Salman, Waleed; Hu, Guangdi; Wang, Chunbai

2017-03-01

The vigilance of the driver is important for railway safety, despite not being included in the safety management system (SMS) for high-speed train safety. In this paper, a novel fatigue detection system for high-speed train safety based on monitoring train driver vigilance using a wireless wearable electroencephalograph (EEG) is presented. This system is designed to detect whether the driver is drowsiness. The proposed system consists of three main parts: (1) a wireless wearable EEG collection; (2) train driver vigilance detection; and (3) early warning device for train driver. In the first part, an 8-channel wireless wearable brain-computer interface (BCI) device acquires the locomotive driver's brain EEG signal comfortably under high-speed train-driving conditions. The recorded data are transmitted to a personal computer (PC) via Bluetooth. In the second step, a support vector machine (SVM) classification algorithm is implemented to determine the vigilance level using the Fast Fourier transform (FFT) to extract the EEG power spectrum density (PSD). In addition, an early warning device begins to work if fatigue is detected. The simulation and test results demonstrate the feasibility of the proposed fatigue detection system for high-speed train safety.

Beam wavefront and farfield control for ICF laser driver

NASA Astrophysics Data System (ADS)

Dai, Wanjun; Deng, Wu; Zhang, Xin; Jiang, Xuejun; Zhang, Kun; Zhou, Wei; Zhao, Junpu; Hu, Dongxia

2010-10-01

Five main problems of beam wavefront and farfield control in ICF laser driver are synthetically discussed, including control requirements, beam propagation principle, distortions source control, system design and adjustment optimization, active wavefront correction technology. We demonstrate that beam can be propagated well and the divergence angle of the TIL pulses can be improved to less than 60μrad with solving these problems, which meets the requirements of TIL. The results can provide theoretical and experimental support for wavefront and farfield control designing requirements of the next large scale ICF driver.

Design of laser diode driver with constant current and temperature control system

NASA Astrophysics Data System (ADS)

Wang, Ming-cai; Yang, Kai-yong; Wang, Zhi-guo; Fan, Zhen-fang

2017-10-01

A laser Diode (LD) driver with constant current and temperature control system is designed according to the LD working characteristics. We deeply researched the protection circuit and temperature control circuit based on thermos-electric cooler(TEC) cooling circuit and PID algorithm. The driver could realize constant current output and achieve stable temperature control of LD. Real-time feedback control method was adopted in the temperature control system to make LD work on its best temperature point. The output power variety and output wavelength shift of LD caused by current and temperature instability were decreased. Furthermore, the driving current and working temperature is adjustable according to specific requirements. The experiment result showed that the developed LD driver meets the characteristics of LD.

Design and construction of the X-2 two-stage free piston driven expansion tube

NASA Technical Reports Server (NTRS)

Doolan, Con

1995-01-01

This report outlines the design and construction of the X-2 two-stage free piston driven expansion tube. The project has completed its construction phase and the facility has been installed in the new impulsive research laboratory where commissioning is about to take place. The X-2 uses a unique, two-stage driver design which allows a more compact and lower overall cost free piston compressor. The new facility has been constructed in order to examine the performance envelope of the two-stage driver and how well it couple to sub-orbital and super-orbital expansion tubes. Data obtained from these experiments will be used for the design of a much larger facility, X-3, utilizing the same free piston driver concept.

Designing for auto safety

NASA Technical Reports Server (NTRS)

Driver, E. T.

1971-01-01

Safety design features in the motor vehicle and highway construction fields result from systems analysis approach to prevent or lessen death, injury, and property damage results. Systems analysis considers the prevention of crashes, increased survivability in crashes, and prompt medical attention to injuries as well as other postcrash salvage measures. The interface of these system elements with the driver, the vehicle, and the environment shows that action on the vehicle system produces the greatest safety payoff through design modifications. New and amended safety standards developed through hazard analysis technique improved accident statistics in the 70'; these regulations include driver qualifications and countermeasures to identify the chronic drunken driver who is involved in more than two-thirds of all auto deaths.

Biophysical drivers of seasonal variability in Sphagnum gross primary production in a northern temperate bog

DOE PAGES

Sebestyen, Stephen D.; Norby, Richard J.; Hanson, Paul J.; ...

2017-04-18

Sphagnum mosses are the keystone species of peatland ecosystems. With rapid rates of climate change occurring in high latitudes, vast reservoirs of carbon accumulated over millennia in peatland ecosystems are potentially vulnerable to rising temperature and changing precipitation. We investigate the seasonal drivers of Sphagnum gross primary production (GPP)—the entry point of carbon into wetland ecosystems. Continuous flux measurements and flux partitioning show a seasonal cycle of Sphagnum GPP that peaked in the late summer, well after the peak in photosynthetically active radiation. Wavelet analysis showed that water table height was the key driver of weekly variation in Sphagnum GPPmore » in the early summer and that temperature was the primary driver of GPP in the late summer and autumn. Flux partitioning and a process-based model of Sphagnum photosynthesis demonstrated the likelihood of seasonally dynamic maximum rates of photosynthesis and a logistic relationship between the water table and photosynthesizing tissue area when the water table was at the Sphagnum surface. Here, the model also suggested that variability in internal resistance to CO 2 transport, a function of Sphagnum water content, had minimal effect on GPP. To accurately model Sphagnum GPP, we recommend the following: (1) understanding seasonal photosynthetic trait variation and its triggers in Sphagnum; (2) characterizing the interaction of Sphagnum photosynthesizing tissue area with water table height; (3) modeling Sphagnum as a “soil” layer for consistent simulation of water dynamics; and (4) measurement of Sphagnum “canopy” properties: extinction coefficient (k), clumping (Ω), and maximum stem area index (SAI).« less

Biophysical drivers of seasonal variability in Sphagnum gross primary production in a northern temperate bog

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sebestyen, Stephen D.; Norby, Richard J.; Hanson, Paul J.

Sphagnum mosses are the keystone species of peatland ecosystems. With rapid rates of climate change occurring in high latitudes, vast reservoirs of carbon accumulated over millennia in peatland ecosystems are potentially vulnerable to rising temperature and changing precipitation. We investigate the seasonal drivers of Sphagnum gross primary production (GPP)—the entry point of carbon into wetland ecosystems. Continuous flux measurements and flux partitioning show a seasonal cycle of Sphagnum GPP that peaked in the late summer, well after the peak in photosynthetically active radiation. Wavelet analysis showed that water table height was the key driver of weekly variation in Sphagnum GPPmore » in the early summer and that temperature was the primary driver of GPP in the late summer and autumn. Flux partitioning and a process-based model of Sphagnum photosynthesis demonstrated the likelihood of seasonally dynamic maximum rates of photosynthesis and a logistic relationship between the water table and photosynthesizing tissue area when the water table was at the Sphagnum surface. Here, the model also suggested that variability in internal resistance to CO 2 transport, a function of Sphagnum water content, had minimal effect on GPP. To accurately model Sphagnum GPP, we recommend the following: (1) understanding seasonal photosynthetic trait variation and its triggers in Sphagnum; (2) characterizing the interaction of Sphagnum photosynthesizing tissue area with water table height; (3) modeling Sphagnum as a “soil” layer for consistent simulation of water dynamics; and (4) measurement of Sphagnum “canopy” properties: extinction coefficient (k), clumping (Ω), and maximum stem area index (SAI).« less

Biophysical drivers of seasonal variability in Sphagnum gross primary production in a northern temperate bog

NASA Astrophysics Data System (ADS)

Walker, Anthony P.; Carter, Kelsey R.; Gu, Lianhong; Hanson, Paul J.; Malhotra, Avni; Norby, Richard J.; Sebestyen, Stephen D.; Wullschleger, Stan D.; Weston, David J.

2017-05-01

Sphagnum mosses are the keystone species of peatland ecosystems. With rapid rates of climate change occurring in high latitudes, vast reservoirs of carbon accumulated over millennia in peatland ecosystems are potentially vulnerable to rising temperature and changing precipitation. We investigate the seasonal drivers of Sphagnum gross primary production (GPP)—the entry point of carbon into wetland ecosystems. Continuous flux measurements and flux partitioning show a seasonal cycle of Sphagnum GPP that peaked in the late summer, well after the peak in photosynthetically active radiation. Wavelet analysis showed that water table height was the key driver of weekly variation in Sphagnum GPP in the early summer and that temperature was the primary driver of GPP in the late summer and autumn. Flux partitioning and a process-based model of Sphagnum photosynthesis demonstrated the likelihood of seasonally dynamic maximum rates of photosynthesis and a logistic relationship between the water table and photosynthesizing tissue area when the water table was at the Sphagnum surface. The model also suggested that variability in internal resistance to CO2 transport, a function of Sphagnum water content, had minimal effect on GPP. To accurately model Sphagnum GPP, we recommend the following: (1) understanding seasonal photosynthetic trait variation and its triggers in Sphagnum; (2) characterizing the interaction of Sphagnum photosynthesizing tissue area with water table height; (3) modeling Sphagnum as a "soil" layer for consistent simulation of water dynamics; and (4) measurement of Sphagnum "canopy" properties: extinction coefficient (k), clumping (Ω), and maximum stem area index (SAI).

A decision model applied to alcohol effects on driver signal light behavior

NASA Technical Reports Server (NTRS)

Schwartz, S. H.; Allen, R. W.

1978-01-01

A decision model including perceptual noise or inconsistency is developed from expected value theory to explain driver stop and go decisions at signaled intersections. The model is applied to behavior in a car simulation and instrumented vehicle. Objective and subjective changes in driver decision making were measured with changes in blood alcohol concentration (BAC). Treatment levels averaged 0.00, 0.10 and 0.14 BAC for a total of 26 male subjects. Data were taken for drivers approaching signal lights at three timing configurations. The correlation between model predictions and behavior was highly significant. In contrast to previous research, analysis indicates that increased BAC results in increased perceptual inconsistency, which is the primary cause of increased risk taking at low probability of success signal lights.

A Study of Alcohol Use by Designated Drivers among College Students

ERIC Educational Resources Information Center

Dermody, Sarah S.; Cheong, JeeWon; Walther, Christine A.

2012-01-01

Objective: College students tend to drink while serving as a designated driver (DD). The predictors of alcohol use by DDs among college students were examined. Participants: Participants were 119 undergraduate students in introductory psychology courses who had experience with DD use. Methods: Survey data were analyzed to examine the predictors of…

Evaluation of a Local Designated Driver and Responsible Server Program to Prevent Drinking and Driving.

ERIC Educational Resources Information Center

Simons-Morton, Bruce G.; Cummings, Sharon Snider

1997-01-01

Evaluates the impact of beverage servers' interventions at five establishments participating in the Houston Techniques for Effective Alcohol Management (TEAM) program. The intervention included server training, a designated-driver program, and "Safe Ride Home" taxi vouchers. Findings are discussed within the context of scant public and…

TARDEC FIXED HEEL POINT (FHP): DRIVER CAD ACCOMMODATION MODEL VERIFICATION REPORT

DTIC Science & Technology

2017-11-09

SUPPLEMENTARY NOTES N/A 14. ABSTRACT Easy-to-use Computer-Aided Design (CAD) tools, known as accommodation models, are needed by the ground vehicle... designers when developing the interior workspace for the occupant. The TARDEC Fixed Heel Point (FHP): Driver CAD Accommodation Model described in this...is intended to provide the composite boundaries representing the body of the defined target design population, including posture prediction

Training Manual: Driver Education. Vocational Strategies for Special Needs Students.

ERIC Educational Resources Information Center

Blanc, Doreen V.

Lessons presented in this manual, developed as part of the vocational strategies project, are designed to provide driver education for mildly handicapped special needs students placed in jobs that require a driver's license. The guide is intended for use in conjunction with a vocational program in automotive mechanics, or integrated into a…

Driving Procedures. A Resource Guide for Driver Education Teachers.

ERIC Educational Resources Information Center

Texas State Dept. of Public Safety, Austin.

Designed to provide instructors with resource materials for driver education, this book contains mainly materials on established safe driving procedures. An introduction defines a procedure as describing ways in which a driver can comply with the law to do something extra that will increase his/her safety and prevent congestion and collision.…

Burden of malaria in mobile populations in the Greater Accra region, Ghana: a cross- sectional study.

PubMed

Diallo, Nouhoum; Akweongo, Patricia; Maya, Ernest; Aikins, Moses; Sarfo, Bismark

2017-03-09

The burden of malaria in mobile populations remains poorly documented in sub-Saharan Africa. This study determined the prevalence of malaria among hawkers and long-distance truck drivers in the Greater Accra region of Ghana. A cross-sectional design using consecutive sampling method between June and July 2016 in Accra and Tema in Ghana was used in this study. The study population was hawkers who roam and sleep in the Market Streets, and long-distance truck drivers. Participants completed closed ended interview questionnaires on socio-demographic characteristics, primary residence and knowledge about malaria. Rapid diagnostic test and thick blood smears of each participant were stained with Giemsa and read using microscopy. Geographical position system (GPS) was used to collect the station locations of these mobile populations. The overall prevalence of malaria was 15.1% and Plasmodium falciparum was responsible for all malaria infection. The malaria prevalence was 18.9 and 10.9% respectively among hawkers and truck drivers (p < 0.05). The hawkers, the single and the no formal educated participants were more likely to get malaria than the long-distance truck drivers (OR = 1.91, 95% CI 1.07-3.42), the married (OR = 1.94 95% CI 1.11-3.40) and the educated participants (OR = 2.56 95% CI 1.10-5.93), respectively. After controlling for other variables, marital status (OR = 2.60 95% CI 1.43- 4.73) and educational level (OR = 2.70 95% CI 1.08-6.77) were statistically significantly associated with malaria. This study demonstrated that the prevalence of malaria is high among hawkers and long distance truck drivers. Sociodemographic characteristics, such as marital status, occupation and educational level are significantly associated with malaria. The station locations as determined by GPS technology will make these mobile populations easier to reach for any malaria intervention.

Bivalve aquaculture-environment interactions in the context of climate change.

PubMed

Filgueira, Ramón; Guyondet, Thomas; Comeau, Luc A; Tremblay, Réjean

2016-12-01

Coastal embayments are at risk of impacts by climate change drivers such as ocean warming, sea level rise and alteration in precipitation regimes. The response of the ecosystem to these drivers is highly dependent on their magnitude of change, but also on physical characteristics such as bay morphology and river discharge, which play key roles in water residence time and hence estuarine functioning. These considerations are especially relevant for bivalve aquaculture sites, where the cultured biomass can alter ecosystem dynamics. The combination of climate change, physical and aquaculture drivers can result in synergistic/antagonistic and nonlinear processes. A spatially explicit model was constructed to explore effects of the physical environment (bay geomorphic type, freshwater inputs), climate change drivers (sea level, temperature, precipitation) and aquaculture (bivalve species, stock) on ecosystem functioning. A factorial design led to 336 scenarios (48 hydrodynamic × 7 management). Model outcomes suggest that the physical environment controls estuarine functioning given its influence on primary productivity (bottom-up control dominated by riverine nutrients) and horizontal advection with the open ocean (dominated by bay geomorphic type). The intensity of bivalve aquaculture ultimately determines the bivalve-phytoplankton trophic interaction, which can range from a bottom-up control triggered by ammonia excretion to a top-down control via feeding. Results also suggest that temperature is the strongest climate change driver due to its influence on the metabolism of poikilothermic organisms (e.g. zooplankton and bivalves), which ultimately causes a concomitant increase of top-down pressure on phytoplankton. Given the different thermal tolerance of cultured species, temperature is also critical to sort winners from losers, benefiting Crassostrea virginica over Mytilus edulis under the specific conditions tested in this numerical exercise. In general, it is predicted that bays with large rivers and high exchange with the open ocean will be more resilient under climate change when bivalve aquaculture is present. © 2016 John Wiley & Sons Ltd.

Measuring and improving student engagement in clinical training.

PubMed

Lee, Simin; Valtis, Yannis K; Jun, Tomi; Wang, David; Zhang, Biqi; Chung, Esther H; Yu, Amy; Williams, Rachael; Cohen, Marya J

2018-01-01

Volunteer service learning activities, including Student Run Clinics (SRCs), are becoming an increasingly popular extracurricular component of medical education. While there are reports that student clinicians generally enjoy their educational experiences at SRCs, it is not understood how to optimize and measure student engagement in them. To identify key drivers of student engagement a tool was created to measure volunteer experience at the Crimson Care Collaborative (CCC), a primary care SRC. CCC volunteers were asked to complete an online engagement survey. Cross-sectional survey data were collected for 149 CCC volunteers (53% response rate). Multivariate linear regression showed that overall 'likelihood to recommend CCC to a friend' was significantly associated with students' perception of the clarity of their role within the clinic, frequency of interprofessional interactions, and overall quality of medical education. Students who volunteer more frequently and for longer periods of time had higher engagement scores. Measuring engagement is feasible in volunteer settings. Engagement appears to be dependent on both structural and experiential components. Easily modifiable components of job design (role definition, expected frequency of volunteering), are key drivers of volunteer engagement.

Improving socket design to prevent difficult removal of locking screws.

PubMed

Lin, Chen-Huei; Chao, Ching-Kong; Tang, Yi-Hsuan; Lin, Jinn

2018-03-01

Reports of driver slippage leading to difficult locking screw removals have increased since the adoption of titanium for screw fabrication; the use of titanium is known to cause cross-threading and cold welding. Such problems occur most frequently in screws with hex sockets, and may cause serious surgical complications. This study aimed to improve screw socket design to prevent slippage and difficult screw removal. Three types of small sockets (hex, Torx, and cruciate) and six types of large sockets (hex, Torx, Octatorx, Torx+ I, Torx+ II, and Torx+ III) with screw head diameters of 5.5 mm were manufactured from titanium, and corresponding screwdrivers were manufactured from stainless steel. The screw heads and drivers were mounted on a material testing machine, and torsional tests were conducted to simulate screw usage in clinical settings at two insertion depths: 1 and 2 mm. Ten specimens were tested from each design, and the maximum torque and failure patterns were recorded and compared. For small sockets in 2 mm conditions, the hex with the largest driver core had the highest torque, followed by Torx and cruciate. In these tests, the drivers were twisted off in all specimens. However, under the 1 mm condition, the hex slipped and the torque decreased markedly. Overall, torque was higher for large sockets than for small sockets. The Octatorx, with a large core and simultaneous deformation of the driver and socket lobes, had the highest torque at almost twice that of the small hex. The hex had the lowest torque, a result of slippage in both the 1 and 2 mm conditions. Torx plus designs, with more designed degrees of freedom, were able to maintain a higher driving angle and larger core for higher torque. The hex design showed slipping tendencies with a marked decrease in torque, especially under conditions with inadequate driver engagement. Large sockets allowed for substantial increases in torque. The Torx, Octatorx, and Torx plus designs displayed better performance than the hexes. Improvements to the socket design could effectively prevent slippage and solve difficult screw removal problems. Copyright © 2018. Published by Elsevier Ltd.

Truck Drivers' Use of the Internet: A Mobile Health Lifeline.

PubMed

Heaton, Karen; Combs, Bryan; Griffin, Russell

2017-06-01

Because of their social isolation, irregular and unpredictable schedules, limited access to health care, and long periods of travel, long-haul truckers may benefit from the use of mobile health applications on Internet-capable devices. The purpose of this study was to determine Internet access and usage among a sample of long-haul truck drivers. In this cross-sectional study, truck drivers completed a pencil and paper survey with questions on demographics, work and health histories, and Internet access and usage for both personal and job reasons. A total of 106 truck drivers were recruited from trucking industry trade shows, by word of mouth, and directly from trucking companies. Overall, the truck drivers' use of the Internet was limited. Their usage for personal and job-related reasons differed. Social connectivity and access to health and wellness information were important during personal usage time. Job-related Internet use was highly practical, and applied to seeking information for directions and maps, fuel stops and pricing, and communicating with employers or transmitting documents. Age and experience were associated with Internet use. Younger, less-experienced drivers used the Internet more than older, experienced drivers. Targeted mobile health messaging may be a useful tool to inform truck drivers of health conditions and plans, and may provide links to primary care providers needing to monitor or notify drivers of diagnostic results or treatment plans.

Google glass: a driver distraction cause or cure?

PubMed

Sawyer, Ben D; Finomore, Victor S; Calvo, Andres A; Hancock, P A

2014-11-01

We assess the driving distraction potential of texting with Google Glass (Glass), a mobile wearable platform capable of receiving and sending short-message-service and other messaging formats. A known roadway danger, texting while driving has been targeted by legislation and widely banned. Supporters of Glass claim the head-mounted wearable computer is designed to deliver information without concurrent distraction. Existing literature supports the supposition that design decisions incorporated in Glass might facilitate messaging for drivers. We asked drivers in a simulator to drive and use either Glass or a smartphone-based messaging interface, then interrupted them with an emergency brake event. Both the response event and subsequent recovery were analyzed. Glass-delivered messages served to moderate but did not eliminate distracting cognitive demands. A potential passive cost to drivers merely wearing Glass was also observed. Messaging using either device impaired driving as compared to driving without multitasking. Glass in not a panacea as some supporters claim, but it does point the way to design interventions that effect reduced load in multitasking. Discussions of these identified benefits are framed within the potential of new in-vehicle systems that bring both novel forms of distraction and tools for mitigation into the driver's seat.

Driving simulator evaluation of drivers' response to intersections with dynamic use of exit-lanes for left-turn.

PubMed

Zhao, Jing; Yun, Meiping; Zhang, H Michael; Yang, Xiaoguang

2015-08-01

With the worsening of urban traffic congestion in large cities around the world, researchers have been looking for unconventional designs and/or controls to squeeze more capacity out of intersections, the most common bottlenecks of the road network. One of these innovative intersection designs, known as the exit-lanes for left-turn (EFL), opens up exit-lanes to be used by left-turn traffic with the help of an additional traffic light installed at the median opening (the pre-signal). This paper studies how drivers respond to EFL intersections with a series of driving simulator experiments. In our experiments, 64 drivers were recruited and divided into two groups. One group is trained to use the EFL while the other group is not. In addition, four scenarios were considered with different sign and marking designs and traffic conditions in the experiments. Results indicate that drivers show certain amount of confusion and hesitation when encountering an EFL intersection for the first time. They can be overcome, however, by increasing exposure through driver education or by cue provided from other vehicles. Moreover, drivers unfamiliar with EFL operation can make a left turn using the conventional left-turn lanes as usual. The EFL operation is not likely to pose any serious safety risk of the intersection in real life operations. Copyright © 2015 Elsevier Ltd. All rights reserved.

Design of DroDeASys (Drowsy Detection and Alarming System)

NASA Astrophysics Data System (ADS)

Juvale, Hrishikesh B.; Mahajan, Anant S.; Bhagwat, Ashwin A.; Badiger, Vishal T.; Bhutkar, Ganesh D.; Dhabe, Priyadarshan S.; Dhore, Manikrao L.

The paper discusses the Drowsy Detection & Alarming System that has been developed, using a non-intrusive approach. The system is basically developed to detect drivers dozing at the wheel at night time driving. The system uses a small infra-red night vision camera that points directly towards the driver`s face and monitors the driver`s eyes in order to detect fatigue. In such a case when fatigue is detected, a warning signal is issued to alert the driver. This paper discusses the algorithms that have been used to detect drowsiness. The decision whether the driver is dozing or not is taken depending on whether the eyes are open for a specific number of frames. If the eyes are found to be closed for a certain number of consecutive frames then the driver is alerted with an alarm.

Development and pilot testing of a decision aid for drivers with dementia.

PubMed

Carmody, John; Potter, Jan; Lewis, Kate; Bhargava, Sanjay; Traynor, Victoria; Iverson, Don

2014-03-19

An increasing number of older adults drive automobiles. Given that the prevalence of dementia is rising, it is necessary to address the issue of driving retirement. The purpose of this study is to evaluate how a self-administered decision aid contributed to decision making about driving retirement by individuals living with dementia. The primary outcome measure in this study was decisional conflict. Knowledge, decision, satisfaction with decision, booklet use and booklet acceptability were the secondary outcome measures. A mixed methods approach was adopted. Drivers with dementia were recruited from an Aged Care clinic and a Primary Care center in NSW, Australia. Telephone surveys were conducted before and after participants read the decision aid. Twelve participants were recruited (mean age 75, SD 6.7). The primary outcome measure, decisional conflict, improved following use of the decision aid. Most participants felt that the decision aid: (i) was balanced; (ii) presented information well; and (iii) helped them decide about driving. In addition, mean knowledge scores improved after booklet use. This decision aid shows promise as an acceptable, useful and low-cost tool for drivers with dementia. A self-administered decision aid can be used to assist individuals with dementia decide about driving retirement. A randomized controlled trial is underway to evaluate the effectiveness of the tool.

Value drivers: an approach for estimating health and disease management program savings.

PubMed

Phillips, V L; Becker, Edmund R; Howard, David H

2013-12-01

Health and disease management (HDM) programs have faced challenges in documenting savings related to their implementation. The objective of this eliminate study was to describe OptumHealth's (Optum) methods for estimating anticipated savings from HDM programs using Value Drivers. Optum's general methodology was reviewed, along with details of 5 high-use Value Drivers. The results showed that the Value Driver approach offers an innovative method for estimating savings associated with HDM programs. The authors demonstrated how real-time savings can be estimated for 5 Value Drivers commonly used in HDM programs: (1) use of beta-blockers in treatment of heart disease, (2) discharge planning for high-risk patients, (3) decision support related to chronic low back pain, (4) obesity management, and (5) securing transportation for primary care. The validity of savings estimates is dependent on the type of evidence used to gauge the intervention effect, generating changes in utilization and, ultimately, costs. The savings estimates derived from the Value Driver method are generally reasonable to conservative and provide a valuable framework for estimating financial impacts from evidence-based interventions.

Parent involvement in novice teen driving: a review of the literature

PubMed Central

Simons‐Morton, B; Ouimet, M C

2006-01-01

Motor vehicle crashes remain elevated among novice teen drivers for at least several years after licensure. Licensing policies and driver education are the two primary countermeasures employed to decrease young driver crash risks. Graduated driver licensing policies have proved to be effective in reducing crash rates where evaluated. Driver education is an essential part of teaching teens the rules of the road and operating a vehicle, but requires few hours of professional driver training, relying mainly on parents to provide most of the supervised practice driving teens obtain before independent driving licensure. The few studies that have been conducted to increase parent supervised practice driving have not shown positive results. Moreover, it is unclear that increases in practice would improve independent driving safety. Recent research has shown that parent management of the early independent driving experience of novice teens improves safety outcomes, and other research has shown that it is possible to increase parent management practices. This paper provides a review of the literature on parent involvement in supervised practice and independent driving, and efforts to increase parental management. PMID:16788109

Parent involvement in novice teen driving: a review of the literature.

PubMed

Simons-Morton, B; Ouimet, M C

2006-06-01

Motor vehicle crashes remain elevated among novice teen drivers for at least several years after licensure. Licensing policies and driver education are the two primary countermeasures employed to decrease young driver crash risks. Graduated driver licensing policies have proved to be effective in reducing crash rates where evaluated. Driver education is an essential part of teaching teens the rules of the road and operating a vehicle, but requires few hours of professional driver training, relying mainly on parents to provide most of the supervised practice driving teens obtain before independent driving licensure. The few studies that have been conducted to increase parent supervised practice driving have not shown positive results. Moreover, it is unclear that increases in practice would improve independent driving safety. Recent research has shown that parent management of the early independent driving experience of novice teens improves safety outcomes, and other research has shown that it is possible to increase parent management practices. This paper provides a review of the literature on parent involvement in supervised practice and independent driving, and efforts to increase parental management.

Is the Epworth Sleepiness Scale a useful tool for screening excessive daytime sleepiness in commercial drivers?

PubMed

Baiardi, Simone; La Morgia, Chiara; Sciamanna, Lucia; Gerosa, Alberto; Cirignotta, Fabio; Mondini, Susanna

2018-01-01

The significant social and economic impact of excessive daytime sleepiness makes sleep evaluation a primary medical need in commercial drivers. However, the best screening tool is still matter of debate. In our cohort of 221 commercial drivers, only ten (4.5%) had Epworth Sleepiness Scale scores indicative of excessive daytime sleepiness. These findings and the lack of concordance in estimating excessive daytime sleepiness among commercial drivers in previous studies using the same psychometric measure indicate that the Epworth Sleepiness Scale is not a reliable tool. This may be due to the low internal consistency of the scale in non-clinical samples and the possible intentional underscoring of sleepiness due to a perceived threat of driver's license suspension. Moreover, the reliability of the Epworth Sleepiness Scale results may be strongly influenced by the administration setting. The clinical application of inexpensive less time-consuming new tools like performance tests should be considered for the objective evaluation of excessive daytime sleepiness in commercial drivers. Copyright © 2017 Elsevier Ltd. All rights reserved.

Motor vehicle driving in high incidence psychiatric disability: comparison of drivers with ADHD, depression, and no known psychopathology.

PubMed

Aduen, Paula A; Kofler, Michael J; Cox, Daniel J; Sarver, Dustin E; Lunsford, Erin

2015-05-01

Although not often discussed in clinical settings, motor vehicle driving is a complex multitasking endeavor during which a momentary attention lapse can have devastating consequences. Previous research suggests that drivers with high incidence psychiatric disabilities such as ADHD contribute disproportionately to collision rates, which in turn portend myriad adverse social, financial, health, mortality, and legal outcomes. However, self-referral bias and the lack of psychiatric comparison groups constrain the generalizability of these findings. The current study addressed these limitations and examined the unique associations among ADHD, Depression, and adverse driving outcomes, independent of self-selection, driving exposure, and referral bias. The Strategic Highway Research Program (SHRP-2) Naturalistic Driving Study comprises U.S. drivers from six sites selected via probability-based sampling. Groups were defined by Barkley ADHD and psychiatric diagnosis questionnaires, and included ADHD (n = 275), Depression (n = 251), and Healthy Control (n = 1828). Primary outcomes included self-reported traffic collisions, moving violations, collision-related injuries, and collision fault (last 3 years). Accounting for demographic differences, ADHD but not Depression portended increased risk for multiple violations (OR = 2.3) and multiple collisions (OR = 2.2). ADHD but not Depression portended increased risk for collision fault (OR = 2.1). Depression but not ADHD predicted increased risk for self-reported injury following collisions (OR = 2.4). ADHD appears uniquely associated with multiple collisions, multiple violations, and collision fault, whereas Depression is uniquely associated with self-reported injury following a collision. Identification of the specific mechanisms underlying this risk will be critical to designing effective interventions to improve long-term functioning for drivers with high incidence psychiatric disability. Copyright © 2015 Elsevier Ltd. All rights reserved.

The ironies of vehicle feedback in car design.

PubMed

Walker, Guy H; Stanton, Neville A; Young, Mark S

2006-02-10

Car drivers show an acute sensitivity towards vehicle feedback, with most normal drivers able to detect 'the difference in vehicle feel of a medium-size saloon car with and without a fairly heavy passenger in the rear seat' (Joy and Hartley 1953-54). The irony is that this level of sensitivity stands in contrast to the significant changes in vehicle 'feel' accompanying modern trends in automotive design, such as drive-by-wire and increased automation. The aim of this paper is to move the debate from the anecdotal to the scientific level. This is achieved by using the Brunel University driving simulator to replicate some of these trends and changes by presenting (or removing) different forms of non-visual vehicle feedback, and measuring resultant driver situational awareness (SA) using a probe-recall method. The findings confirm that vehicle feedback plays a key role in coupling the driver to the dynamics of their environment (Moray 2004), with the role of auditory feedback particularly prominent. As a contrast, drivers in the study also rated their self-perceived levels of SA and a concerning dissociation occurred between the two sets of results. Despite the large changes in vehicle feedback presented in the simulator, and the measured changes in SA, drivers appeared to have little self-awareness of these changes. Most worryingly, drivers demonstrated little awareness of diminished SA. The issues surrounding vehicle feedback are therefore similar to the classic problems and ironies studied in aviation and automation, and highlight the role that ergonomics can also play within the domain of contemporary vehicle design.

Driver performance and attention allocation in use of logo signs on freeway exit ramps.

PubMed

Zahabi, Maryam; Machado, Patricia; Lau, Mei Ying; Deng, Yulin; Pankok, Carl; Hummer, Joseph; Rasdorf, William; Kaber, David B

2017-11-01

The objective of this research was to quantify the effects of driver age, ramp signage configuration, including number of panels, logo format and sign familiarity, on driver performance and attention allocation when exiting freeways. Sixty drivers participated in a simulator study and analysis of variance models were used to assess response effects of the controlled manipulations. Results revealed elderly drivers to demonstrate worse performance and conservative control strategies as compared to middle-aged and young drivers. Elderly drivers also exhibited lower off-road fixation frequency and shorter off-road glance durations compared to middle-aged and young drivers. In general, drivers adopted a more conservative strategy when exposed to nine-panel signs as compared to six-panel signs and were more accurate in target detection when searching six-panels vs. nine and with familiar vs. unfamiliar logos. These findings provide an applicable guide for agency design of freeway ramp signage accounting for driver demographics. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Balsa bullet: A high speed, low-cost general aviation aircraft for Aeroworld

NASA Technical Reports Server (NTRS)

Eastland, Kevin; Greenwood, Sean; Kelly, Dan; Leonard, Chuck; Rooff, John; Scherock, Jeff

1994-01-01

The Balsa Bullet is a high speed, low cost six passenger general aviation aircraft. It will cruise at a speed of 55 ft/s with a maximum speed of 75 ft/s for distances in excess of 27000 feet. This range and speed combination provide The Balsa Bullet with the capability to service any two existing airports in Aeroworld in an efficient and timely manner. Overall, three major design drivers have been identified by the design team. The first is to provide a low cost airplane to the Aeroworld market. Maintaining the low cost objective will not simply meet the mission objective, but will also make the Bullet an economically viable option for a wide number of consumers. The Balsa Bullet has a total manufacturing cost of $1000 with a price to the consumer of only $2562. The second major driver is high speed performance. Once again this driver exists not only to meet the mission objective given Long Shot Aeronautics but it provides a desirable feature to the consumer, pride in owning the fastest aircraft in Aeroworld. The third design driver identified is the capability to service any runway in Aeroworld necessitating the ability to takeoff within 28 ft, the length of the shortest runways in Aeroworld. These design drivers provide three great reasons for the general public to purchase a Bullet.

A programmable CCD driver circuit for multiphase CCD operation

NASA Technical Reports Server (NTRS)

Ewin, Audrey J.; Reed, Kenneth V.

1989-01-01

A programmable CCD (charge-coupled device) driver circuit was designed to drive CCDs in multiphased modes. The purpose of the drive electronics is to operate developmental CCD imaging arrays for NASA's tiltable moderate resolution imaging spectrometer (MODIS-T). Five objectives for the driver were considered during its design: (1) the circuit drives CCD electrode voltages between 0 V and +30 V to produce reasonable potential wells, (2) the driving sequence is started with one input signal, (3) the driving sequence is started with one input signal, (4) the circuit allows programming of frame sequences required by arrays of any size, (5) it produces interfacing signals for the CCD and the DTF (detector test facility). Simulation of the driver verified its function with the master clock running up to 10 MHz. This suggests a maximum rate of 400,000 pixels/s. Timing and packaging parameters were verified. The design uses 54 TTL (transistor-transistor logic) chips. Two versions of hardware were fabricated: wirewrap and printed circuit board. Both were verified functionally with a logic analyzer.

Driver face tracking using semantics-based feature of eyes on single FPGA

NASA Astrophysics Data System (ADS)

Yu, Ying-Hao; Chen, Ji-An; Ting, Yi-Siang; Kwok, Ngaiming

2017-06-01

Tracking driver's face is one of the essentialities for driving safety control. This kind of system is usually designed with complicated algorithms to recognize driver's face by means of powerful computers. The design problem is not only about detecting rate but also from parts damages under rigorous environments by vibration, heat, and humidity. A feasible strategy to counteract these damages is to integrate entire system into a single chip in order to achieve minimum installation dimension, weight, power consumption, and exposure to air. Meanwhile, an extraordinary methodology is also indispensable to overcome the dilemma of low-computing capability and real-time performance on a low-end chip. In this paper, a novel driver face tracking system is proposed by employing semantics-based vague image representation (SVIR) for minimum hardware resource usages on a FPGA, and the real-time performance is also guaranteed at the same time. Our experimental results have indicated that the proposed face tracking system is viable and promising for the smart car design in the future.

Mutational analysis of multiple lung cancers: Discrimination between primary and metastatic lung cancers by genomic profile.

PubMed

Goto, Taichiro; Hirotsu, Yosuke; Mochizuki, Hitoshi; Nakagomi, Takahiro; Shikata, Daichi; Yokoyama, Yujiro; Oyama, Toshio; Amemiya, Kenji; Okimoto, Kenichiro; Omata, Masao

2017-05-09

In cases of multiple lung cancers, individual tumors may represent either a primary lung cancer or both primary and metastatic lung cancers. Treatment selection varies depending on such features, and this discrimination is critically important in predicting prognosis. The present study was undertaken to determine the efficacy and validity of mutation analysis as a means of determining whether multiple lung cancers are primary or metastatic in nature. The study involved 12 patients who underwent surgery in our department for multiple lung cancers between July 2014 and March 2016. Tumor cells were collected from formalin-fixed paraffin-embedded tissues of the primary lesions by using laser capture microdissection, and targeted sequencing of 53 lung cancer-related genes was performed. In surgically treated patients with multiple lung cancers, the driver mutation profile differed among the individual tumors. Meanwhile, in a case of a solitary lung tumor that appeared after surgery for double primary lung cancers, gene mutation analysis using a bronchoscopic biopsy sample revealed a gene mutation profile consistent with the surgically resected specimen, thus demonstrating that the tumor in this case was metastatic. In cases of multiple lung cancers, the comparison of driver mutation profiles clarifies the clonal origin of the tumors and enables discrimination between primary and metastatic tumors.

Issues and Design Drivers for Deep Space Habitats

NASA Technical Reports Server (NTRS)

Rucker, Michelle A.; Anderson, Molly

2012-01-01

A cross-disciplinary team of scientists and engineers applied expertise gained in Lunar Lander development to the conceptual design of a long-duration, deep space habitat for Near Earth Asteroid (NEA) missions. The design reference mission involved two launches to assemble 5-modules for a 380-day round trip mission carrying 4 crew members. The conceptual design process yielded a number of interesting debates, some of which could be significant design drivers in a detailed Deep Space Habitat (DSH) design. These issues included: Design to minimize crew radiation exposure, launch loads, communications challenges, docking system and hatch commonality, pointing and visibility, consumables, and design for contingency operations.

Getting Your Driver's License. An Adult Competency Education Learning Module.

ERIC Educational Resources Information Center

Wallace, Virginia

This instructional unit on getting one's driver's license is one of six Adult Competency Education Learning Modules designed for use in a program of competency-based instruction for students with intermediate reading level ability. It is self-contained and designed for immediate classroom use. The module is comprised of 4 parts and 10 lessons: The…

Hatch latch mechanism for Spacelab scientific airlock

NASA Technical Reports Server (NTRS)

Terhaar, G. R.

1979-01-01

The requirements, design tradeoff, design, and performance of the Spacelab scientific airlock hatch latching mechanisms are described. At space side the hatch is closed and held against internal airlock/module pressure by 12 tangential overcenter hooks driven by a driver. At module side the hatch is held by 4 hooks driven by rollers running on a cammed driver.

High performance thyratron driver with low jitter.

PubMed

Verma, Rishi; Lee, P; Springham, S V; Tan, T L; Rawat, R S

2007-08-01

We report the design and development of insulated gate bipolar junction transistor based high performance driver for operating thyratrons in grounded grid mode. With careful design, the driver meets the specification of trigger output pulse rise time less than 30 ns, jitter less than +/-1 ns, and time delay less than 160 ns. It produces a -600 V pulse of 500 ns duration (full width at half maximum) at repetition rate ranging from 1 Hz to 1.14 kHz. The developed module also facilitates heating and biasing units along with protection circuitry in one complete package.

Long-Term Benefits of Prompts to Use Safety Belts among Drivers Exiting Senior Communities

ERIC Educational Resources Information Center

Cox, Cory D.; Cox, Brian S.; Cox, Daniel J.

2005-01-01

Senior drivers are vulnerable to automobile crashes and subsequent injury and death. Safety belts reduce health risks associated with auto crashes. Therefore, it is important to encourage senior drivers to wear safety belts while driving. Using a repeated baseline design (AAB), we previously reported that motivating signs boosted safety belt usage…

Bicycles in Traffic. A North Carolina Driver Education Handbook.

ERIC Educational Resources Information Center

East Carolina Univ., Greenville, NC.

This unit is designed to provide driver educators with information for teaching automobile drivers about the traffic-mix problem between bicycles and motor vehicles on roadways. The purpose of the unit is to improve the safety of bicyclists on North Carolina highways and help to decrease the number of bicycle deaths and injuries caused by traffic…

Driver-related risk factors in commercial motorcycle (okada) crashes in Benin City, Nigeria.

PubMed

Iribhogbe, Pius Ehiawaguan; Odai, Emeka Danielson

2009-01-01

There has been global concern regarding road traffic injuries. Motorcyclists constitute a high proportion of fatalities in road traffic crashes. Commercial motorcyclists (Okadas) constitute a unique group in this regard. The purpose of this study was to evaluate driver-related risk factors in Okada accidents in Benin City, Nigeria. This was a prospective study. Interviewers administered questionnaires which were used to assess Okada drivers during a two-month period (November-December 2006). A total of 996 Okada drivers were interviewed, 995 males and one female. Their ages ranged from 16-80 years with a mean age of 36.4 +/-2.4 years. In the majority of cases, the maximum educational level achieved was primary or secondary. The majority of Okada drivers (82.8%) took to the Okada business as a last resort. Driver's licenses for Okada operation were possessed by 73.5% of drivers, but only 27.2% had taken a road test before being given a license. No form of training on the use of Okadas was received by 45% of drivers before they commenced operations. Crash helmets were owned by 56.4%, but they did not use them on a regular basis. Inconvenience was the reason provided for poor compliance by 52.7% of drivers. Regular intake of alcohol was present in 39.8% of drivers. Okada drivers are mainly young males with a low level of education who are ill-prepared and ill-equipped for the road. This is a recipe for traffic crash-related injuries and fatal motorcycle crashes. There is an urgent need for job creation, better licensing procedures, road safety education, national legislation, and enforcement of crash helmet laws as well as alcohol breath tests for Okada drivers in Nigeria.

Large Binocular Telescope project

NASA Astrophysics Data System (ADS)

Hill, John M.; Salinari, Piero

2000-08-01

The Large Binocular Telescope (LBT) Project is a collaboration between institutions in Arizona, Germany, Italy, and Ohio. The telescope will have two 8.4 meter diameter primary mirrors phased on a common mounting with a 22.8 meter baseline. The second of two borosilicate honeycomb primary mirrors for LBT is being case at the Steward Observatory Mirror Lab this year. The baseline optical configuration of LBT includes adaptive infrared secondaries of a Gregorian design. The F/15 secondaries are undersized to provide a low thermal background focal plane which is unvignetted over a 4 arcminute diameter field-of- view. The interferometric focus combining the light from the two 8.4 meter primaries will reimage the two folded Gregorian focal planes to three central locations. The telescope elevation structure accommodates swing arm spiders which allow rapid interchange of the various secondary and tertiary mirrors as well as prime focus cameras. Maximum stiffness and minimal thermal disturbance were important drivers for the design of the telescope in order to provide the best possible images for interferometric observations. The telescope structure accommodates installation of a vacuum bell jar for aluminizing the primary mirrors in-situ on the telescope. The telescope structure is being fabricated in Italy by Ansaldo Energia S.p.A. in Milan. After pre-erection in the factory, the telescope will be shipped to Arizona in early 2001. The enclosure is being built on Mt. Graham under the auspices of Hart Construction Management Services of Safford, Arizona. The enclosure will be completed by late 2001 and ready for telescope installation.

Development of a hybrid mode linear transformer driver stage

NASA Astrophysics Data System (ADS)

Zhang, Le; Wang, Meng; Zhou, Liangji; Tian, Qing; Guo, Fan; Wang, Lingyun; Qing, Yanling; Zhao, Yue; Dai, Yingmin; Han, Wenhui; Chen, Lin; Xie, Weiping

2018-02-01

At present, the mainstream technologies of primary power sources of large pulse power devices adopt Marx or linear transformer driver (LTD) designs. Based on the analysis of the characteristics of these two types of circuit topologies, the concept of a hybrid mode LTD stage based on Marx branches is proposed. The analysis shows that the hybrid mode LTD stage can realize the following goals: (a) to reduce the energy and power handled by the basic components (switch and capacitor) to lengthen their lifetime; (b) to reduce the requirements of the multipath synchronous trigger system; and (c) to improve the maintainability of the LTD stage by using independent Marx generators instead of "traditional LTD bricks." To verify the technique, a hybrid mode LTD stage consisting of 50 branches (four-stage compact Marx generators) was designed, manufactured and tested. The stage has a radius of about 3.3 m and a height of 0.6 m. The single Marx circuit's load current is about 21 kA, with a rise time of ˜90 ns (10%-90%), under the conditions of capacitors charged to ±40 kV and a 6.9 Ω matched load. The whole stage's load current is ˜1 MA , with a rise time of ˜112 ns (10%-90%), when the capacitors are charged to ±45 kV and the matched load is 0.14 Ω .

House-to-house human movement drives dengue virus transmission

PubMed Central

Stoddard, Steven T.; Forshey, Brett M.; Morrison, Amy C.; Paz-Soldan, Valerie A.; Vazquez-Prokopec, Gonzalo M.; Astete, Helvio; Reiner, Robert C.; Vilcarromero, Stalin; Elder, John P.; Halsey, Eric S.; Kochel, Tadeusz J.; Kitron, Uriel; Scott, Thomas W.

2013-01-01

Dengue is a mosquito-borne disease of growing global health importance. Prevention efforts focus on mosquito control, with limited success. New insights into the spatiotemporal drivers of dengue dynamics are needed to design improved disease-prevention strategies. Given the restricted range of movement of the primary mosquito vector, Aedes aegypti, local human movements may be an important driver of dengue virus (DENV) amplification and spread. Using contact-site cluster investigations in a case-control design, we demonstrate that, at an individual level, risk for human infection is defined by visits to places where contact with infected mosquitoes is likely, independent of distance from the home. Our data indicate that house-to-house human movements underlie spatial patterns of DENV incidence, causing marked heterogeneity in transmission rates. At a collective level, transmission appears to be shaped by social connections because routine movements among the same places, such as the homes of family and friends, are often similar for the infected individual and their contacts. Thus, routine, house-to-house human movements do play a key role in spread of this vector-borne pathogen at fine spatial scales. This finding has important implications for dengue prevention, challenging the appropriateness of current approaches to vector control. We argue that reexamination of existing paradigms regarding the spatiotemporal dynamics of DENV and other vector-borne pathogens, especially the importance of human movement, will lead to improvements in disease prevention. PMID:23277539

Lunar launch and landing facilities and operations

NASA Technical Reports Server (NTRS)

1987-01-01

The Florida Institute of Technology established an Interdisciplinary Design Team to design a lunar based facility whose primary function involves launch and landing operations for future moon missions. Both manned and unmanned flight operations were considered in the study with particular design emphasis on the utilization (or reutilization) of all materials available on the moon. This resource availability includes man-made materials which might arrive in the form of expendable landing vehicles as well as in situ lunar minerals. From an engineering standpoint, all such materials are considered as to their suitability for constructing new lunar facilities and/or repairing or expanding existing structures. Also considered in this design study was a determination of the feasibility of using naturally occurring lunar materials to provide fuel components to support lunar launch operations. Conventional launch and landing operations similar to those used during the Apollo Program were investigated as well as less conventional techniques such as rail guns and electromagnetic mass drivers. The Advanced Space Design team consisted of students majoring in Physics and Space Science as well as Electrical, Mechanical, Chemical and Ocean Engineering.

Ergonomic evaluation of interior design of Shoka vehicle and proposing recommendations for improvement.

PubMed

Mazloumi, Adel; Mohammadreze, Fallah

2012-01-01

One of the applications of ergonomics disciplinary is designing driver workstation compatible to users' characteristics. The aim of this study was evaluation of interior design of Shoka vehicle with respect to the accommodation for Iranian population and proposing suggestions for customizing design of this vehicle. This study was a descriptive-analytical study conducted among thirty men from Iranian drivers population in 5, 50, 95 percentiles of the stature variable. Objective variables related to the occupant packaging and vehicle visual aspects including anthropometric variables, frontal, lateral, and side view and so on were investigated first. Then, subjective variables related to the driver mental workload and body comfort discomfort were studied using BMDMW and comfort questionnaires during 2-hour driving trial sessions. Occupant packaging variables and hand-arm angle showed the least accommodation percent (%53). Seating angles showed low accommodation as well (%73). Among three percentile groups there were no significant differences between the mean values of mental workload during two hours driving task. And, the mean value related to the comfort discomfort was 3.9 during driving sessions. Considering the findings in this study, it can be conclude that seating angles need correction and optimization. Taking mental workload results into account, it can be concluded that the interior design of the studied car had no influence on drivers' mental workload. From the aspect of comfort discomfort, Shoka vehicle showed neutral state among drivers. Optimizing seating angles, decreasing vibration, correcting stiffness of seating pan are suggested for customization of the ergonomics aspect of this vehicle.

Exploring Challenges in Developing a Smart and Effective Assistive System for Improving the Experience of the Elderly Drivers

NASA Astrophysics Data System (ADS)

Jung, Sebin; Meng, Hong-Ying; Qin, Sheng-Feng

2017-09-01

As the overall population ages, driving-related accidents and injuries, associated with elderly drivers, have risen. Existing research about elderly drivers mainly focuses on factual data collection and analysis, indicating the elderly's growing fatal accident rates and their different behaviours compared to younger drivers. However, few research has focused on design-led practical solutions to mitigate the elderly's growing fatal accidents, by considering their usability and body conditions, afflicting the elderly, such as decreased vision, hearing, and reaction times. In this paper, first, current worldwide situations on growing fatal accident rates for elderly drivers is reviewed and the key impact factors are identified and discussed with regarding to usability and design trend in the automotive technology for elderly. Second, existing smart vehicle technology-based solutions to promote safe driving are explored and their pros and cons are discussed and analysed. Most of solutions are not created by people with driving difficulties, which are caused by health problems most commonly afflicting the elderly. Thirdly, diverse design-led research activities are taken, such as a survey, observation, and interviews to gain new understanding of what kinds of driving problems elderly drivers have and demonstrate how new system concepts could be developed for the elderly's benefits. Finally, it is found that the elderly's low vision and late reaction are main factors causing their driving difficulties. Based on this finding, usable vehicle system design ideas have been proposed, by utilising facial expression sensing technology as a solution. The proposed solutions would ensure reducing both the elderly's driving problems and high fatal accident rates and provide a more enjoyable driving environment for the elderly population.

BEAM DYNAMICS STUDIES OF A HIGH-REPETITION RATE LINAC-DRIVER FOR A 4TH GENERATION LIGHT SOURCE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ventturini, M.; Corlett, J.; Emma, P.

2012-05-18

We present recent progress toward the design of a super-conducting linac driver for a high-repetition rate FEL-based soft x-ray light source. The machine is designed to accept beams generated by the APEX photo-cathode gun operating with MHz-range repetition rate and deliver them to an array of SASE and seeded FEL beamlines. We review the current baseline design and report results of beam dynamics studies.

Safety implications of providing real-time feedback to distracted drivers.

PubMed

Donmez, Birsen; Boyle, Linda Ng; Lee, John D

2007-05-01

A driving simulator study was conducted to assess whether real-time feedback on a driver's state can influence the driver's interaction with in-vehicle information systems (IVIS). Previous studies have shown that IVIS tasks can undermine driver safety by increasing driver distraction. Thus, mitigating driver distraction using a feedback mechanism appears promising. This study was designed to test real-time feedback that alerts drivers based on their off-road eye glances. Feedback was displayed in two display locations (vehicle-centered, and IVIS-centered) to 16 young and 13 middle-aged drivers. Distraction was observed as problematic for both age groups with delayed responses to a lead vehicle-braking event as indicated by delayed accelerator releases. Significant benefits were not observed for braking and steering behavior for this experiment, but there was a significant change in drivers' interaction with IVIS. When given feedback on their distracted state, drivers looked at the in-vehicle display less frequently regardless of where feedback was displayed in the vehicle. This indicates that real-time feedback based on the driver state can positively alter driver's engagement in distracting activities, helping them attend better to the roadway.

Simulation-based evaluation of an in-vehicle smart situation awareness enhancement system.

PubMed

Gregoriades, Andreas; Sutcliffe, Alistair

2018-07-01

Situation awareness (SA) constitutes a critical factor in road safety, strongly related to accidents. This paper describes the evaluation of a proposed SA enhancement system (SAES) that exploits augmented reality through a head-up display (HUD). Two SAES designs were evaluation (information rich vs. minimal information) using a custom-made simulator and the Situation Awareness Global Assessment Technique with performance and EEG measures. The paper describes the process of assessing the SA of drivers using the SAES, through a series of experiments with participants in a Cave Automatic Virtual Environment. The effectiveness of the SAES was tested in a within-group research design. The results showed that the information rich (radar-style display) was superior to the minimal (arrow hazard indicator) design and that both SAES improved drivers' SA and performance compared to the control (no HUD) design. Practitioner Summary: Even though driver situation awareness is considered as one of the leading causes of road accidents, little has been done to enhance it. The current study demonstrates the positive effect of a proposed situation awareness enhancement system on driver situation awareness, through an experiment using virtual prototyping in a simulator.

Integrated control design for driver assistance systems based on LPV methods

NASA Astrophysics Data System (ADS)

Gáspár, Péter; Németh, Balázs

2016-12-01

The paper proposes a control design method for a driver assistance system. In the operation of the system, a predefined trajectory required by the driver with a steering command is followed. During manoeuvres the control system generates differential brake moment and the auxiliary front-wheel steering angle and changes the camber angles of the wheels in order to improve the tracking of the road trajectory. The performance specifications are guaranteed by the local controllers, i.e. the brake, the steering, and the suspension systems, while the coordination of these components is provided by the supervisor. The advantage of this architecture is that local controllers are designed independently, which is ensured by the fact that the monitoring signals are taken into consideration in the formalisation of their performance specifications. The fault-tolerant control can be achieved by incorporating the detected fault signals in their performance specifications. The control system also uses a driver model, with which the reference signal can be generated. In the control design, the parameter-dependent linear parameter-varyingmethod, which meets the performance specifications, is used. The operation of the control system is illustrated through different normal and emergency vehicle manoeuvres with a high-accuracy simulation software.

Feasibility of developing a portable driver performance data acquisition system for human factors research: Technical tasks. Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carter, R.J.; Barickman, F.S.; Spelt, P.F.

1998-01-01

A two-phase, multi-year research program entitled ``development of a portable driver performance data acquisition system for human factors research`` was recently completed. The primary objective of the project was to develop a portable data acquisition system for crash avoidance research (DASCAR) that will allow drive performance data to be collected using a large variety of vehicle types and that would be capable of being installed on a given vehicle type within a relatively short-time frame. During phase 1 a feasibility study for designing and fabricating DASCAR was conducted. In phase 2 of the research DASCAR was actually developed and validated.more » This technical memorandum documents the results from the feasibility study. It is subdivided into three volumes. Volume one (this report) addresses the last five items in the phase 1 research and the first issue in the second phase of the project. Volumes two and three present the related appendices, and the design specifications developed for DASCAR respectively. The six tasks were oriented toward: identifying parameters and measures; identifying analysis tools and methods; identifying measurement techniques and state-of-the-art hardware and software; developing design requirements and specifications; determining the cost of one or more copies of the proposed data acquisition system; and designing a development plan and constructing DASCAR. This report also covers: the background to the program; the requirements for the project; micro camera testing; heat load calculations for the DASCAR instrumentation package in automobile trunks; phase 2 of the research; the DASCAR hardware and software delivered to the National Highway Traffic Safety Administration; and crash avoidance problems that can be addressed by DASCAR.« less

Designing Inquiry for Upper Elementary Students: Lessons Learned from Driver's Ed

ERIC Educational Resources Information Center

Rabbat, Suzy

2014-01-01

One of the most memorable achievements of adolescence is the independence gained from obtaining a driver's license. Students are highly motivated to study the rules of the road, hone their skills behind the wheel, and meet all the state requirements to reach their goal. They are invested in the process because they value the outcome. The Driver's…

Safe Driving in Illinois. A Manual to Accompany the Illinois Rules of the Road.

ERIC Educational Resources Information Center

Rice, Gail; Nowack, Linda

Designed to accompany and supplement the Illinois Rules of the Road manual, this book is intended to better prepare future drivers for the written test for the instruction permit or driver's license. It includes many pictures and shows and describes driving situations a driver will probably face when behind the wheel. Parts dealing with important…

Legislative advocacy is key to addressing teen driving deaths

PubMed Central

Gillan, J S

2006-01-01

The increased crash risk of young, novice drivers, especially in their teenage years, has been a growing concern at both the state and federal levels. Teenage drivers are involved in fatal crashes at more than double the rate of the rest of the population per 100 000 licensed drivers. The best way of stemming these losses is to enact laws adopting graduated licensure systems that restrict young, novice drivers to conditions that reduce crash risk exposure when they first operate motor vehicles and to educate the public on the need for this legislation. Legislated teenage driving restrictions involve night‐time vehicle driving restrictions, prohibitions on other teenage passengers, and the required presence of supervising adults. These restrictions are relaxed as teenage drivers successfully progress through initial and intermediate stages of graduated licensure before being granted unrestricted driver licenses. Unfortunately, many states have incomplete graduated licensing systems that need further legislative action to raise them to the desirable three‐stage system that has been shown repeatedly to produce the greatest safety benefits. These state efforts should be buttressed by federal legislation that has proved to be crucial in allied driver behavioral concerns. Because reducing crash risk involves other strategies, stringent enforcement of primary seat belt laws as well as improved motor vehicle crash avoidance capabilities and crashworthiness must accompany efforts to reduce young driver crash risk. PMID:16788112

The effect of age and gender on motor vehicle driver injury severity at highway-rail grade crossings in the United States.

PubMed

Hao, Wei; Kamga, Camille; Daniel, Janice

2015-12-01

Based on the Federal Railway Administration (FRA) database, there were 25,945 highway-rail crossing accidents in the United States between 2002 and 2011. With an extensive database of highway-rail grade crossing accidents in the United States from 2002 to 2011, estimation results showed that there were substantial differences across age/gender groups for driver's injury severity. The study applied an ordered probit model to explore the determinants of driver injury severity for motor vehicle drivers at highway-rail grade crossings. The analysis found that there are important behavioral and physical differences between male and female drivers given a highway-rail grade crossing accident happened. Older drivers have higher fatality probabilities when driving in open space under passive control especially during bad weather condition. Younger male drivers are found to be more likely to have severe injuries at rush hour with high vehicle speed passing unpaved highway-rail grade crossings under passive control. Synthesizing these results led to the conclusion that the primary problem with young is risk-taking and lack of vehicle handling skills. The strength of older drivers lies in their aversion to risk, but physical degradation issues which result in longer reaction/perception times and degradation in vision and hearing often counterbalance this attribute. Copyright © 2015 Elsevier Ltd and National Safety Council. All rights reserved.

Driver's Enhanced Vision System (DEVS)

DOT National Transportation Integrated Search

1996-12-23

This advisory circular (AC) contains performance standards, specifications, and : recommendations for Drivers Enhanced Vision sSystem (DEVS). The FAA recommends : the use of the guidance in this publication for the design and installation of : DEVS e...

Modifying behaviour to reduce over-speeding in work-related drivers: an objective approach.

PubMed

Newnam, Sharon; Lewis, Ioni; Warmerdam, Amanda

2014-03-01

The goal of this study was to utilise an objective measurement tool, via an on-board Diagnostic tool (OBDII), to explore the effectiveness of a behaviour modification intervention designed to reduce over-speed violations in a group of work-related drivers. It was predicted that over-speed violations would be decreased following participation in a behaviour modification intervention where drivers received weekly feedback on their speeding performance and goal setting exercises. The final analysis included the on-road behaviour of 16 drivers, all of whom completed each stage of the intervention programme. As predicted, over-speed violations significantly decreased from pre-test to post-test, after controlling for kilometres driven. These findings offer practical guidance for industry in developing interventions designed to improve work-related driving behaviour. Copyright © 2013 Elsevier Ltd. All rights reserved.

A numerical tool for reproducing driver behaviour: experiments and predictive simulations.

PubMed

Casucci, M; Marchitto, M; Cacciabue, P C

2010-03-01

This paper presents the simulation tool called SDDRIVE (Simple Simulation of Driver performance), which is the numerical computerised implementation of the theoretical architecture describing Driver-Vehicle-Environment (DVE) interactions, contained in Cacciabue and Carsten [Cacciabue, P.C., Carsten, O. A simple model of driver behaviour to sustain design and safety assessment of automated systems in automotive environments, 2010]. Following a brief description of the basic algorithms that simulate the performance of drivers, the paper presents and discusses a set of experiments carried out in a Virtual Reality full scale simulator for validating the simulation. Then the predictive potentiality of the tool is shown by discussing two case studies of DVE interactions, performed in the presence of different driver attitudes in similar traffic conditions.

Using Self-Reliance Factors to Decide How to Share Control Between Human Powered Wheelchair Drivers and Ultrasonic Sensors.

PubMed

Sanders, David A

2017-08-01

A shared-control scheme for a powered wheelchair is presented. The wheelchair can be operated by a wheelchair driver using a joystick, or directed by a sensor system, or control can be combined between them. The wheelchair system can modify direction depending on the local environment. Sharing the control allows a disabled wheelchair driver to drive safely and efficiently. The controller automatically establishes the control gains for the sensor system and the human driver by calculating a self-reliance factor for the wheelchair driver. The sensor system can influence the motion of the wheelchair to compensate for some deficiency in a disabled driver. Practical tests validate the proposed techniques and designs.

Nuclear characteristics of a fissioning uranium plasma test reactor with light-water cooling

NASA Technical Reports Server (NTRS)

Whitmarsh, C. L., Jr.

1973-01-01

An analytical study was performed to determine a design configuration for a cavity test reactor. Test section criteria were that an average flux of 10 to the 15th power neutrons/sq cm/sec (E less than or equal to 0.12 eV) be supplied to a 61-cm-diameter spherical cavity at 200-atm pressure. Design objectives were to minimize required driver power, to use existing fuel-element technology, and to obtain fuel-element life of 10 to 100 full-power hours. Parameter calculations were made on moderator region size and material, driver fuel arrangement, control system, and structure in order to determine a feasible configuration. Although not optimized, a configuration was selected which would meet design criteria. The driver fuel region was a cylindrical annular region, one element thick, of 33 MTR-type H2O-cooled elements (Al-U fuel plate configuration), each 101 cm long. The region between the spherical test cavity and the cylindrical driver fuel region was Be (10 vol. % H2O coolant) with a midplane dimension of 8 cm. Exterior to the driver fuel, the 25-cm-thick cylindrical and axial reflectors were also Be with 10 vol. % H2O coolant. The entire reactor was contained in a 10-cm-thick steel pressure vessel, and the 200-atm cavity pressure was equalized throughout the driver reactor. Fuel-element life was 50 hr at the required driver power of 200 MW. Reactor control would be achieved with rotating poison drums located in the cylindrical reflector region. A control range of about 18 percent delta k/k was required for reactor operation.

Can younger drivers be trained to scan for information that will reduce their risk in roadway traffic scenarios that are hard to identify as hazardous?

PubMed Central

Pradhan, A.K.; Pollatsek, A.; Knodler, M.; Fisher, D.L.

2009-01-01

Younger drivers (18–21 years) are over-involved in crashes. Research suggests that one of the reasons for this over-involvement is their failure to scan areas of the roadway for information about potential risks in situations that are hazardous, but not obviously so. The primary objective of the present study is to develop and evaluate a training program that addresses this failure. It was hypothesised that PC-based hazard anticipation training would increase the likelihood that younger drivers would scan for potential hazards on the open road. In order to test this hypothesis, 12 trained and 12 untrained drivers' eye movements were measured as they drove a vehicle on local residential, feeder and arterial roads. Overall, the trained drivers were significantly more likely to gaze at areas of the roadway that contained information relevant to the reduction of risks (64.4%) than were the untrained drivers (37.4%). Significant training effects were observed even in situations on the road that were quite different from those shown in training. These findings have clear implications for the type of training of teen drivers that is necessary in order to increase their anticipation of hazards. PMID:19296315

Improving drivers' knowledge of road rules using digital games.

PubMed

Li, Qing; Tay, Richard

2014-04-01

Although a proficient knowledge of the road rules is important to safe driving, many drivers do not retain the knowledge acquired after they have obtained their licenses. Hence, more innovative and appealing methods are needed to improve drivers' knowledge of the road rules. This study examines the effect of game based learning on drivers' knowledge acquisition and retention. We find that playing an entertaining game that is designed to impart knowledge of the road rules not only improves players' knowledge but also helps them retain such knowledge. Hence, learning by gaming appears to be a promising learning approach for driver education. Copyright © 2013 Elsevier Ltd. All rights reserved.

What the drivers do and do not tell you: using verbal protocol analysis to investigate driver behaviour in emergency situations.

PubMed

Banks, Victoria A; Stanton, Neville A; Harvey, Catherine

2014-01-01

Although task analysis of pedestrian detection can provide us with useful insights into how a driver may behave in emergency situations, the cognitive elements of driver decision-making are less well understood. To assist in the design of future Advanced Driver Assistance Systems, such as Autonomous Emergency Brake systems, it is essential that the cognitive elements of the driving task are better understood. This paper uses verbal protocol analysis in an exploratory fashion to uncover the thought processes underlying behavioural outcomes represented by hard data collected using the Southampton University Driving Simulator.

Simple, low-noise piezo driver with feed-forward for broad tuning of external cavity diode lasers.

PubMed

Doret, S Charles

2018-02-01

We present an inexpensive, low-noise (<260 μV rms , 0.1 Hz-100 kHz) design for a piezo driver suitable for frequency tuning of external-cavity diode lasers. This simple driver improves upon many commercially available drivers by incorporating circuitry to produce a "feed-forward" signal appropriate for making simultaneous adjustments to the piezo voltage and laser current, enabling dramatic improvements in a mode-hop-free laser frequency tuning range. We present the theory behind our driver's operation, characterize its output noise, and demonstrate its use in absorption spectroscopy on the rubidium D 1 line.

Drivers' safety needs, behavioural adaptations and acceptance of new driving support systems.

PubMed

Saad, Farida; Van Elslande, Pierre

2012-01-01

The aim of this paper is to discuss the contribution of two complementary approaches for designing and evaluating new driver support systems likely to improve the operation and safety of the road traffic system. The first approach is based on detailed analyses of traffic crashes so as to estimate drivers' needs for assistance and the situational constraints that safety functions should address to be efficient. The second approach is based on in depth-analyses of behavioral adaptations induced by the usage of new driver support systems in regular driving situations and on drivers' acceptance of the assistance provided by the systems.

Differences in state drug testing and reporting by driver type in U.S. fatal traffic crashes.

PubMed

Slater, Megan E; Castle, I-Jen P; Logan, Barry K; Hingson, Ralph W

2016-07-01

Driving under the influence of drugs, including marijuana, has become more prevalent in recent years despite local, state, and federal efforts to prevent such increases. The Fatality Analysis Reporting System (FARS) is the primary source of drugged driving data for fatal crashes in the United States but lacks the completeness required to calculate unbiased estimates of drug use among drivers involved in fatal crashes. This article uses the 2013 FARS dataset to present differences in state drug testing rates by driver type, driver fault type, and state-level factors; discusses limitations related to analysis and interpretation of drugged driving data; and offers suggestions for improvements that may enable appropriate use of FARS drug testing data in the future. Results showed that state drug testing rates were highest among drivers who died at the scene of the crash (median=70.8%) and drivers who died and were at fault in the crash (median=64.4%). The lowest testing rates were seen among surviving drivers who were not transported to a hospital (median=14.0%) and surviving drivers who were not at fault in the crash (median=10.0%). Drug testing rates differed by state blood alcohol content (BAC) testing rate across all driver types and driver fault types, and in general, states that tested a higher percentage of drivers for BAC had higher drug testing rates. Testing rates might be increased through standardization and mandatory testing policies. FARS data users should continue to be cautious about the limitations of using currently available data to quantify drugged driving. More efforts are needed to improve drug testing and reporting practices, and more research is warranted to establish drug concentration levels at which driving skills become impaired. Copyright © 2016 Elsevier Ltd. All rights reserved.

Impact of gender, organized athletics, and video gaming on driving skills in novice drivers.

PubMed

Wayne, Nancy L; Miller, Gregory A

2018-01-01

Given that novice drivers tend to be young, and teenagers and young adult drivers are involved in the greatest number of accidents, it is important that we understand what factors impact the driving skills of this population of drivers. The primary aim of the present study was to understand the impact of gender, organized athletics, and video gaming on driving skills of novice drivers under real-world driving conditions. Novice driving students having less than five hours driving experience previous to a normal driving lesson were evaluated on their self-confidence (self-reported) prior to the lesson and driving skill evaluated by their instructor during the course of the lesson. Information was collected about gender, age, whether or not the students were involved in organized athletics, and the extent of their video game playing. There was no impact of gender or extent of video game playing on driving skills. Females were significantly less self-confident with driving than males, but this did not translate to gender differences in driving skills. Being involved in organized athletics-either currently or in the past-significantly enhanced driving skills in both females and males. Finally, novice drivers' age was negatively correlated with driving skills. That is, younger novice drivers (especially males) had better driving skills than older novice drivers. This is counter to popular belief that young drivers lack technical driving skills because they have less experience behind the wheel. Based on the results of the current study, we hypothesize that the relatively high accident rate of younger drivers (especially male drivers) is most likely due to inattention to safety considerations rather than lack of technical driving ability.

The Governmentality of Childhood Obesity: Coca-Cola, Public Health and Primary Schools

ERIC Educational Resources Information Center

Powell, Darren; Gard, Michael

2015-01-01

In this paper, we examine the emergence of what might seem an unexpected policy outcome--a large multinational corporation, frequently blamed for exacerbating childhood obesity, operating as an officially sanctioned driver of anti-obesity initiatives in primary schools across the globe. We draw on Foucault's notion of governmentality to examine…

Impacts of alternative climate information on hydrologic processes with SWAT: A comparison of NCDC, PRISM and NEXRAD datasets

USDA-ARS?s Scientific Manuscript database

Precipitation and temperature are two primary drivers that significantly affect hydrologic processes in a watershed. A network of land-based National Climatic Data Center (NCDC) weather stations has been typically used as a primary source of climate input for agro-ecosystem models. However, the ne...

Using naturalistic driving films as a design tool for investigating driver requirements in HMI design for ADAS.

PubMed

Wang, Minjuan; Sun, Dong; Chen, Fang

2012-01-01

In recent years, there are many naturalistic driving projects have been conducted, such as the 100-Car Project (Naturalistic Driving study in United State), EuroFOT(European Large-Scale Field Operational Tests on Vehicle Systems), SeMi- FOT(Sweden Michigan Naturalistic Field Operational Test and etc. However, those valuable naturalistic driving data hasn't been applied into Human-machine Interaction (HMI) design for Advanced Driver Assistance Systems (ADAS), a good HMI design for ADAS requires a deep understanding of drive environment and the interactions between the driving car and other road users in different situations. The results demonstrated the benefits of using naturalistic driving films as a mean for enhancing focus group discussion for better understanding driver's needs and traffic environment constraints. It provided an efficient tool for designers to have inside knowledge about drive and the needs for information presentation; The recommendations for how to apply this method is discussed in the paper.

Population distributions of time to collision at brake application during car following from naturalistic driving data.

PubMed

Kusano, Kristofer D; Chen, Rong; Montgomery, Jade; Gabler, Hampton C

2015-09-01

Forward collision warning (FCW) systems are designed to mitigate the effects of rear-end collisions. Driver acceptance of these systems is crucial to their success, as perceived "nuisance" alarms may cause drivers to disable the systems. In order to make customizable FCW thresholds, system designers need to quantify the variation in braking behavior in the driving population. The objective of this study was to quantify the time to collision (TTC) that drivers applied the brakes during car following scenarios from a large scale naturalistic driving study (NDS). Because of the large amount of data generated by NDS, an automated algorithm was developed to identify lead vehicles using radar data recorded as part of the study. Using the search algorithm, all trips from 64 drivers from the 100-Car NDS were analyzed. A comparison of the algorithm to 7135 brake applications where the presence of a lead vehicle was manually identified found that the algorithm agreed with the human review 90.6% of the time. This study examined 72,123 trips that resulted in 2.6 million brake applications. Population distributions of the minimum, 1st, and 10th percentiles were computed for each driver in speed ranges between 3 and 60 mph in 10 mph increments. As speed increased, so did the minimum TTC experience by drivers as well as variance in TTC. Younger drivers (18-30) had lower TTC at brake application compared to older drivers (30-51+), especially at speeds between 40 mph and 60 mph. This is one of the first studies to use large scale NDS data to quantify braking behavior during car following. The results of this study can be used to design and evaluate FCW systems and calibrate traffic simulation models. Copyright © 2015 Elsevier Ltd and National Safety Council. All rights reserved.

Holography: Use in Training and Testing Drivers on the Road in Accident Avoidance.

ERIC Educational Resources Information Center

Frey, Allan H.; Frey, Donnalyn

1979-01-01

Defines holography, identifies visual factors in driving and the techniques used in on-road visual presentations, and presents the design and testing of a holographic system for driver training. (RAO)

First direct landscape-scale measurement of tropical rain forest Leaf Area Index, a key driver of global primary productivity

Treesearch

David B. Clark; Paulo C. Olivas; Steven F. Oberbauer; Deborah A. Clark; Michael G. Ryan

2008-01-01

Leaf Area Index (leaf area per unit ground area, LAI) is a key driver of forest productivity but has never previously been measured directly at the landscape scale in tropical rain forest (TRF). We used a modular tower and stratified random sampling to harvest all foliage from forest floor to canopy top in 55 vertical transects (4.6 m2) across 500 ha of old growth in...

Underwater Simultaneous EMI and Magnetometer System (USEMS)

DTIC Science & Technology

2011-02-01

advantages over other marine metal detectors . The first is that, because the sensors are affixed via a rigid boom instead of towed with a cable...Island free of metallic clutter, emplaced a test plot with 14 pipes ranging from 1.5 to 4 inches in diameter, measured the locations of items in it with... metallic contamination. 2.3 REGULATORY DRIVERS The primary driver is the continued need to develop tools to detect underwater MEC. The documented use

Multivariable Parametric Cost Model for Ground Optical Telescope Assembly

NASA Technical Reports Server (NTRS)

Stahl, H. Philip; Rowell, Ginger Holmes; Reese, Gayle; Byberg, Alicia

2005-01-01

A parametric cost model for ground-based telescopes is developed using multivariable statistical analysis of both engineering and performance parameters. While diameter continues to be the dominant cost driver, diffraction-limited wavelength is found to be a secondary driver. Other parameters such as radius of curvature are examined. The model includes an explicit factor for primary mirror segmentation and/or duplication (i.e., multi-telescope phased-array systems). Additionally, single variable models Based on aperture diameter are derived.

Prevalence of driver physical factors leading to unintentional lane departure crashes.

PubMed

Cicchino, Jessica B; Zuby, David S

2017-07-04

Some lane-keeping assist systems in development and production provide autonomous braking and steering to correct unintentional lane drift but otherwise require drivers to fully control their vehicles. The goal of this study was to quantify the proportion of drivers involved in unintentional lane drift crashes who would be unable to regain control of their vehicles to inform the design of such systems. The NHTSA's National Motor Vehicle Crash Causation Survey collected in-depth, on-scene data for a nationally representative sample of 5,470 U.S. police-reported passenger vehicle crashes during 2005-2007 that occurred between 6 a.m. and midnight and for which emergency medical services were dispatched. The physical states of drivers involved in the 631 lane drift crashes in the sample, which represented 259,034 crashes nationally, were characterized. Thirty-four percent of drivers who crashed because they drifted from their lanes were sleeping or otherwise incapacitated. These drivers would be unlikely to regain full control of their vehicles if an active safety system prevented their initial drift. An additional 13% of these drivers had a nonincapacitating medical issue, blood alcohol concentration (BAC) ≥ 0.08%, or other physical factor that may not allow them to regain full vehicle control. When crashes involved serious or fatal injuries, 42% of drivers who drifted were sleeping or otherwise incapacitated, and an additional 14% were impacted by a nonincapacitating medical issue, BAC ≥ 0.08%, or other physical factor. Designers of active safety systems that provide autonomous lateral control should consider that a substantial proportion of drivers at risk of lane drift crashes are incapacitated. Systems that provide only transient corrective action may not ultimately prevent lane departure crashes for these drivers, and drivers who do avoid lane drift crashes because of these systems may be at high risk of other types of crashes when they attempt to regain control. Active lane-keeping assist systems may need to be combined with in-vehicle driver monitoring to identify incapacitated drivers and safely remove them from the roadway if the systems are to reach their maximum potential benefit.

Adaptive Capacity and Social-Environmental Change: Theoretical and Operational Modeling of Smallholder Coffee Systems Response in Mesoamerican Pacific Rim

NASA Astrophysics Data System (ADS)

Eakin, Hallie; Bojórquez-Tapia, Luis A.; Diaz, Rafael Monterde; Castellanos, Edwin; Haggar, Jeremy

2011-03-01

Communities who rely directly on the natural environment for their survival typically have developed risk management strategies to enable them to avoid dangerous thresholds of change to their livelihoods. Development policy appropriate for natural resource-based communities requires an understanding of the primary drivers of social-ecological change, the ways in which affected households autonomously respond to such drivers, and the appropriate avenues for intervention to reduce vulnerability. Coffee has been, and still remains, one of the most important commodities of the Mesoamerican region, and hundreds of thousands of smallholder households in the region are dependent in some way on the coffee industry for their livelihood stability. We used the Analytical Network Process to synthesize expert knowledge on the primary drivers of livelihood change in the region as well as the most common household strategies and associated capacities necessary for effective response. The assessment identified both gradual systemic processes as well as specific environmental and market shocks as significant drivers of livelihood change across the region. Agronomic adjustments and new forms of social organization were among the more significant responses of farmers to these changes. The assessment indicates that public interventions in support of adaptation should focus on enhancing farmers' access to market and technical information and finance, as well as on increasing the viability of farmers' organizations and cooperatives.

Adaptive capacity and social-environmental change: theoretical and operational modeling of smallholder coffee systems response in Mesoamerican Pacific Rim.

PubMed

Eakin, Hallie; Bojórquez-Tapia, Luis A; Monterde Diaz, Rafael; Castellanos, Edwin; Haggar, Jeremy

2011-03-01

Communities who rely directly on the natural environment for their survival typically have developed risk management strategies to enable them to avoid dangerous thresholds of change to their livelihoods. Development policy appropriate for natural resource-based communities requires an understanding of the primary drivers of social-ecological change, the ways in which affected households autonomously respond to such drivers, and the appropriate avenues for intervention to reduce vulnerability. Coffee has been, and still remains, one of the most important commodities of the Mesoamerican region, and hundreds of thousands of smallholder households in the region are dependent in some way on the coffee industry for their livelihood stability. We used the Analytical Network Process to synthesize expert knowledge on the primary drivers of livelihood change in the region as well as the most common household strategies and associated capacities necessary for effective response. The assessment identified both gradual systemic processes as well as specific environmental and market shocks as significant drivers of livelihood change across the region. Agronomic adjustments and new forms of social organization were among the more significant responses of farmers to these changes. The assessment indicates that public interventions in support of adaptation should focus on enhancing farmers' access to market and technical information and finance, as well as on increasing the viability of farmers' organizations and cooperatives.

Shuttle's 160 hour ground turnaround - A design driver

NASA Technical Reports Server (NTRS)

Widick, F.

1977-01-01

Turnaround analysis added a new dimension to the Space Program with the advent of the Space Shuttle. The requirement to turn the flight hardware around in 160 working hours from landing to launch was a significant design driver and a useful tool in forcing the integration of flight and ground systems design to permit an efficient ground operation. Although there was concern that time constraints might increase program costs, the result of the analysis was to minimize facility requirements and simplify operations with resultant cost savings.

Resource Efficient Metal and Material Recycling

NASA Astrophysics Data System (ADS)

Reuter, Markus A.; van Schaik, Antoinette

Metals enable sustainability through their use and their recyclability. However, various factors can affect the Resource Efficiency of Metal Processing and Recycling. Some typical factors that enable Resource Efficiency include and arranged under the drivers of sustainability: Environment (Maximize Resource Efficiency — Energy, Recyclates, Materials, Water, Sludges, Emissions, Land); Economic Feasibility (BAT & Recycling Systems Simulation / Digitalization, Product vis-à-vis Material Centric Recycling); and Social — Licence to Operate (Legislation, consumer, policy, theft, manual labour.). In order to realize this primary production has to be linked systemically with typical actors in the recycling chain such as Original Equipment Manufacturers (OEMs), Recyclers & Collection, Physical separation specialists as well as process metallurgical operations that produce high value metals, compounds and products that recycle back to products. This is best done with deep knowledge of multi-physics, technology, product & system design, process control, market, life cycle management, policy, to name a few. The combination of these will be discussed as Design for Sustainability (DfS) and Design for Recycling (DfR) applications.

Dominant role of drivers' attitude in prevention of road traffic crashes: a study on knowledge, attitude, and practice of drivers in Iran.

PubMed

Mirzaei, Ramazan; Hafezi-Nejad, Nima; Sadegh Sabagh, Mohammad; Ansari Moghaddam, Alireza; Eslami, Vahid; Rakhshani, Fatemeh; Rahimi-Movaghar, Vafa

2014-05-01

Evaluating the relation between Iranian drivers' knowledge, attitude, and practice (KAP) regarding traffic regulations, and their deterministic effect on road traffic crashes (RTCs). Two cities of Tehran and Zahedan, Iran. A cross-sectional study was designed. Using a simplified cluster sampling design, 2200 motor vehicle drivers including 1200 in Tehran and 1000 in Zahedan were selected. Sixty locations in Tehran and 50 in Zahedan were chosen. In each pre-identified location, 20 adult drivers were approached consecutively. A questionnaire developed by researchers was filled by each participant. The questionnaire had four sections including items assessing the demographics, knowledge, attitude and practice of drivers toward traffic regulations. Logistic regression analysis was used to evaluate the relationship between the RTCs and KAP variables. The study sample consisted of 619 (28.1%) occupational and 1580 (71.8%) private drivers. Among them, 86.4% were male. The median age was 33.6 ± 10.83. Drivers in Tehran and Zahedan had no significant differences between their mean scores of KAP items of the questionnaire. Higher knowledge, safer attitude, and safer practice were associated with a decreased number of RTC. After adjusting for possible confounders, increase of one standard deviation in attitude and practice scores (but not knowledge) resulted in 26.4% and 18.5% decrease in RTC, respectively. Finally, considering knowledge, attitude and practice of drivers in one model to assess their mutual effect, it was shown that only attitude is significantly associated with a decrease of RTC (OR=0.76, P=0.007). Increase in attitude and practice accompanied with decreased number of RTCs in Iranian drivers. Specifically, drivers' attitude had the crucial effect. It is not knowledge and standard traffic education; rather it is how such education is registered as an attitude that translates what is being learned into actions. Without safer attitude, even safer self-reported practice will not result in lower RTCs. Copyright © 2014 Elsevier Ltd. All rights reserved.

EEG alpha spindles and prolonged brake reaction times during auditory distraction in an on-road driving study.

PubMed

Sonnleitner, Andreas; Treder, Matthias Sebastian; Simon, Michael; Willmann, Sven; Ewald, Arne; Buchner, Axel; Schrauf, Michael

2014-01-01

Driver distraction is responsible for a substantial number of traffic accidents. This paper describes the impact of an auditory secondary task on drivers' mental states during a primary driving task. N=20 participants performed the test procedure in a car following task with repeated forced braking on a non-public test track. Performance measures (provoked reaction time to brake lights) and brain activity (EEG alpha spindles) were analyzed to describe distracted drivers. Further, a classification approach was used to investigate whether alpha spindles can predict drivers' mental states. Results show that reaction times and alpha spindle rate increased with time-on-task. Moreover, brake reaction times and alpha spindle rate were significantly higher while driving with auditory secondary task opposed to driving only. In single-trial classification, a combination of spindle parameters yielded a median classification error of about 8% in discriminating the distracted from the alert driving. Reduced driving performance (i.e., prolonged brake reaction times) during increased cognitive load is assumed to be indicated by EEG alpha spindles, enabling the quantification of driver distraction in experiments on public roads without verbally assessing the drivers' mental states. Copyright © 2013 Elsevier Ltd. All rights reserved.

Driving with advanced vehicle technology: A qualitative investigation of older drivers' perceptions and motivations for use.

PubMed

Gish, Jessica; Vrkljan, Brenda; Grenier, Amanda; Van Miltenburg, Benita

2017-09-01

For older drivers, in-vehicle technology offers much potential to improve safety and increase longevity of retaining both licensure and community mobility. However, little is known about how older drivers perceive Advanced Vehicle Technologies (AVTs) based on everyday driving experience. Interviews with 35 older drivers (20 men; 15 women) aged 60-85 who owned a vehicle with at least two AVTs (e.g., back-up camera, lane departure warning) were conducted to explore the meanings that older drivers assigned to AVTs and motivations for use, including whether age-related functional changes were part of their automobile purchase decision. Findings indicate that age-related changes are not a primary reason for why older adults seek out AVTs, but they still perceived and experienced AVTs to counteract age-related changes in driving performance based upon changes they felt occurring within the body. Older drivers also described AVTs as generating a sense of comfort behind-the-wheel. Comfort with this technology was equated with convenience, ease of use, and increased feelings of safety. Discussion emphasizes how assessments of the quality of driving performance and value of technology occur in relation to an aging body. Copyright © 2016 Elsevier Ltd. All rights reserved.

Using naturalistic driving study data to investigate the impact of driver distraction on driver's brake reaction time in freeway rear-end events in car-following situation.

PubMed

Gao, Jingru; Davis, Gary A

2017-12-01

The rear-end crash is one of the most common freeway crash types, and driver distraction is often cited as a leading cause of rear-end crashes. Previous research indicates that driver distraction could have negative effects on driving performance, but the specific association between driver distraction and crash risk is still not fully revealed. This study sought to understand the mechanism by which driver distraction, defined as secondary task distraction, could influence crash risk, as indicated by a driver's reaction time, in freeway car-following situations. A statistical analysis, exploring the causal model structure regarding drivers' distraction impacts on reaction times, was conducted. Distraction duration, distraction scenario, and secondary task type were chosen as distraction-related factors. Besides, exogenous factors including weather, visual obstruction, lighting condition, traffic density, and intersection presence and endogenous factors including driver age and gender were considered. There was an association between driver distraction and reaction time in the sample freeway rear-end events from SHRP 2 NDS database. Distraction duration, the distracted status when a leader braked, and secondary task type were related to reaction time, while all other factors showed no significant effect on reaction time. The analysis showed that driver distraction duration is the primary direct cause of the increase in reaction time, with other factors having indirect effects mediated by distraction duration. Longer distraction duration, the distracted status when a leader braked, and engaging in auditory-visual-manual secondary task tended to result in longer reaction times. Given drivers will be distracted occasionally, countermeasures which shorten distraction duration or avoid distraction presence while a leader vehicle brakes are worth considering. This study helps better understand the mechanism of freeway rear-end events in car-following situations, and provides a methodology that can be adopted to study the association between driver behavior and driving features. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Recent Warming, Rather than Industrial Emissions of Bioavailable Nutrients, Is the Dominant Driver of Lake Primary Production Shifts across the Athabasca Oil Sands Region

PubMed Central

Summers, Jamie C.; Kurek, Joshua; Kirk, Jane L.; Muir, Derek C. G.; Wang, Xiaowa; Wiklund, Johan A.; Cooke, Colin A.; Evans, Marlene S.; Smol, John P.

2016-01-01

Freshwaters in the Athabasca Oil Sands Region (AOSR) are vulnerable to the atmospheric emissions and land disturbances caused by the local oil sands industry; however, they are also affected by climate change. Recent observations of increases in aquatic primary production near the main development area have prompted questions about the principal drivers of these limnological changes. Is the enhanced primary production due to deposition of nutrients (nitrogen and phosphorus) from local industry or from recent climatic changes? Here, we use downcore, spectrally-inferred chlorophyll-a (VRS-chla) profiles (including diagenetic products) from 23 limnologically-diverse lakes with undisturbed catchments to characterize the pattern of primary production increases in the AOSR. Our aim is to better understand the relative roles of the local oil sands industry versus climate change in driving aquatic primary production trends. Nutrient deposition maps, generated using geostatistical interpolations of spring-time snowpack measurements from a grid pattern across the AOSR, demonstrate patterns of elevated total phosphorus, total nitrogen, and bioavailable nitrogen deposition around the main area of industrial activity. However, this pattern is not observed for bioavailable phosphorus. Our paleolimnological findings demonstrate consistently greater VRS-chla concentrations compared to pre-oil sands development levels, regardless of morphological and limnological characteristics, landscape position, bioavailable nutrient deposition, and dibenzothiophene (DBT)-inferred industrial impacts. Furthermore, breakpoint analyses on VRS-chla concentrations across a gradient of DBT-inferred industrial impact show limited evidence of a contemporaneous change among lakes. Despite the contribution of bioavailable nitrogen to the landscape from industrial activities, we find no consistency in the spatial pattern and timing of VRS-chla shifts with an industrial fertilizing signal. Instead, significant positive correlations were observed between VRS-chla and annual and seasonal temperatures. Our findings suggest warmer air temperatures and likely decreased ice covers are important drivers of enhanced aquatic primary production across the AOSR. PMID:27135946

Why HID headlights bother older drivers

PubMed Central

Mainster, M A; Timberlake, G T

2003-01-01

Driving requires effective coordination of visual, motor, and cognitive skills. Visual skills are pushed to their limit at night by decreased illumination and by disabling glare from oncoming headlights. High intensity discharge (HID) headlamps project light farther down roads, improving their owner’s driving safety by increasing the time available for reaction to potential problems. Glare is proportional to headlamp brightness, however, so increasing headlamp brightness also increases potential glare for oncoming drivers, particularly on curving two lane roads. This problem is worse for older drivers because of their increased intraocular light scattering, glare sensitivity, and photostress recovery time. An analysis of automobile headlights, intraocular stray light, glare, and night driving shows that brightness rather than blueness is the primary reason for the visual problems that HID headlights can cause for older drivers who confront them. The increased light projected by HID headlights is potentially valuable, but serious questions remain regarding how and where it should be projected. PMID:12488274

Older Driver Safety: A Survey of Psychologists' Attitudes, Knowledge, and Practices.

PubMed

Love, Janet; Tuokko, Holly

2016-09-01

Using an online survey, we examined the knowledge, attitudes, and practices with respect to older driver safety concerns of clinical psychologists from across Canada who self-identified as working with at least some drivers over 60 years of age. Eighty-four psychologists completed the survey, and many were aware of the issues relevant to older driver safety, although only about half reported that assessing fitness to drive was an important issue in their practice. The majority (75%) reported that they would benefit from education concerning evaluation of fitness to drive. The primary recommendation emerging from this investigation is to increase efforts to inform and educate psychologists about driving-related assessment and regulatory issues in general, and specifically with respect to older adults. As the population ages, it is of growing importance for all health care providers to understand the influence of mental health conditions-including cognitive impairment and dementia-on driving skills.

Classifying Drivers' Cognitive Load Using EEG Signals.

PubMed

Barua, Shaibal; Ahmed, Mobyen Uddin; Begum, Shahina

2017-01-01

A growing traffic safety issue is the effect of cognitive loading activities on traffic safety and driving performance. To monitor drivers' mental state, understanding cognitive load is important since while driving, performing cognitively loading secondary tasks, for example talking on the phone, can affect the performance in the primary task, i.e. driving. Electroencephalography (EEG) is one of the reliable measures of cognitive load that can detect the changes in instantaneous load and effect of cognitively loading secondary task. In this driving simulator study, 1-back task is carried out while the driver performs three different simulated driving scenarios. This paper presents an EEG based approach to classify a drivers' level of cognitive load using Case-Based Reasoning (CBR). The results show that for each individual scenario as well as using data combined from the different scenarios, CBR based system achieved approximately over 70% of classification accuracy.

Assessing out-of-pocket expenditures for primary health care: how responsive is the Democratic Republic of Congo health system to providing financial risk protection?

PubMed

Laokri, Samia; Soelaeman, Rieza; Hotchkiss, David R

2018-06-15

The goal of universal health coverage is challenging for chronically under-resourced health systems. Although household out-of-pocket payments are the most important source of health financing in low-income countries, relatively little is known about the drivers of primary health care expenditure and the predictability of the burden associated with high fee-for-service payments. This study describes out-of-pocket health expenditure and investigates demand- and supply-side drivers of excessive costs in the Democratic Republic of Congo (DRC), a central African country in the midst of a process of reforming its health financing system towards universal health coverage. A population-based household survey was conducted in four provinces of the DRC in 2014. Data included type, level and utilization of health care services, accessibility to care, patient satisfaction and disaggregated health care expenditure. Multivariate logistic regressions of excessive expenditure for outpatient care using alternative thresholds were performed to explore the incidence and predictors of atypically high expenditure incurred by individuals. Over 17% (17.5%) of individuals living in sample households reported an illness or injury without being hospitalized. Of 3341 individuals reporting an event in the four-week period prior to the survey, 65.6% sought outpatient care with an average of one visit (SD = 0.0). The overall mean expenditure per visit was US$ 6.7 (SD = 10.4) with 29.4% incurring excessive expenditure. The main predictors of a financial risk burden included utilizing public services offering the complementary benefit package, dissatisfaction with care received, being a member of a large household, expenditure composition, severity of illness, residence and wealth (p < .05). The insured status influenced the expenditure level, with no association with catastrophe. Those who did not seek care when needed reported financial constraints as the major reason for postponing or foregoing care. Wealth-related inequities were found in service and population coverage and in out-of-pocket payment for outpatient care. Burdensome expenditure for primary care and its key drivers are of utmost importance. Forthcoming health financing reform agendas must incorporate a strategy for getting data used in the design of financial risk protection. Realizing equitable and efficient access to outpatient care is a vital ingredient for sustainable health systems.

The strength of graduated drivers license programs and fatalities among teen drivers and passengers.

PubMed

Morrisey, Michael A; Grabowski, David C; Dee, Thomas S; Campbell, Christine

2006-01-01

The purpose of this study is to investigate the effects of differentially stringent graduated drivers license programs on teen driver fatalities, day-time and night-time teen driver fatalities, fatalities of teen drivers with passengers present, and fatalities among teen passengers. The study uses 1992-2002 data on motor vehicle fatalities among 15-17-year-old drivers from the Fatality Analysis Reporting System to identify the effects of "good", "fair", and "marginal" GDL programs based upon designations by the Insurance Institute for Highway Safety. Analysis is conducted using conditional negative binomial regressions with fixed effects. "Good" programs reduce total fatalities among young drivers by 19.4% (c.i. -33.0%, -5.9%). "Fair" programs reduce night-time young driver fatalities by 12.6% (c.i. -23.9%, -1.2%), but have no effect on day-time fatalities. "Marginal" programs had no statistically meaningful effect on driver fatalities. All three types of programs reduced teen passenger fatalities, but the effects of limitations on the number of passengers appear to have had only minimal effects in reducing fatalities among young drivers themselves. Stronger GDL programs are more effective than weaker programs in reducing teenage motor vehicle fatalities.

Diode-pumped solid state lasers (DPSSLs) for Inertial Fusion Energy (IFE)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krupke, W.F.

The status of diode-pumped, transverse-gas-flow cooled, Yb-S-FAP slab lasers is reviewed. Recently acquired experimental performance data are combined with a cost/performance IFE driver design code to define a cost-effective development path for IFE DPSSL drivers. Specific design parameters are described for the Mercury 100J/10 Hz, 1 kW system (first in the development scenario).

Evaluating the Effects of Traffic on Driver Stopping and Turn Signal Use at a Stop Sign: A Systematic Replication

ERIC Educational Resources Information Center

Lebbon, Angela R.; Austin, John; Van Houten, Ron; Malenfant, Louis E.

2007-01-01

The current analyses of observational data found that oncoming traffic substantially affected driver stopping patterns and turn signal use at the target stop sign. The percentage of legal stops and turn signal use by drivers in the presence and absence of traffic was analyzed using a multi-element design. The results showed that legal stops were…

A contribution to the availability of lunar resources for powered construction

NASA Technical Reports Server (NTRS)

Heppenheimer, T. A.

1980-01-01

The use of lunar resources to construct solar power satellites wherein the resources are transported by a lunar mass driver is discussed. The minimization of cross track errors in the launch of payloads by mass driver is emphasized. The design and construction of the mass driver is outlined. Features of the proposed system addressed include passive magnetic damping, separation and snapout, and downrange correction.

A wide bandgap silicon carbide (SiC) gate driver for high-temperature and high-voltage applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lamichhane, Ranjan; Ericson, Milton Nance; Frank, Steven Shane

2014-01-01

Limitations of silicon (Si) based power electronic devices can be overcome with Silicon Carbide (SiC) because of its remarkable material properties. SiC is a wide bandgap semiconductor material with larger bandgap, lower leakage currents, higher breakdown electric field, and higher thermal conductivity, which promotes higher switching frequencies for high power applications, higher temperature operation, and results in higher power density devices relative to Si [1]. The proposed work is focused on design of a SiC gate driver to drive a SiC power MOSFET, on a Cree SiC process, with rise/fall times (less than 100 ns) suitable for 500 kHz tomore » 1 MHz switching frequency applications. A process optimized gate driver topology design which is significantly different from generic Si circuit design is proposed. The ultimate goal of the project is to integrate this gate driver into a Toyota Prius plug-in hybrid electric vehicle (PHEV) charger module. The application of this high frequency charger will result in lighter, smaller, cheaper, and a more efficient power electronics system.« less

Land system change and food security: towards multi-scale land system solutions☆

PubMed Central

Verburg, Peter H; Mertz, Ole; Erb, Karl-Heinz; Haberl, Helmut; Wu, Wenbin

2013-01-01

Land system changes are central to the food security challenge. Land system science can contribute to sustainable solutions by an integrated analysis of land availability and the assessment of the tradeoffs associated with agricultural expansion and land use intensification. A land system perspective requires local studies of production systems to be contextualised in a regional and global context, while global assessments should be confronted with local realities. Understanding of land governance structures will help to support the development of land use policies and tenure systems that assist in designing more sustainable ways of intensification. Novel land systems should be designed that are adapted to the local context and framed within the global socio-ecological system. Such land systems should explicitly account for the role of land governance as a primary driver of land system change and food production. PMID:24143158

The Behavioral Economics of Drunk Driving

PubMed Central

Sloan, Frank A.; Eldred, Lindsey; Xu, Yanzhi

2014-01-01

This study investigates whether drinker-drivers attributes are associated with imperfect rationality or irrationality. Using data from eight U.S. cities, we determine whether drinker-drivers differ from other drinkers in cognitive ability, ignorance of driving while intoxicated (DWI) laws, have higher rates of time preference, are time inconsistent, and lack self-control on other measures. We find that drinker-drivers are relatively knowledgeable about DWI laws and do not differ on two of three study measures of cognitive ability from other drinkers. Drinker-drivers are less prone to plan events involving drinking, e.g., selecting a designated driver in advance of drinking, and are more impulsive. Furthermore, we find evidence in support of hyperbolic discounting. In particular, relative to non-drinker-drivers, the difference between short- and long-term discount rates is much higher for drinker-drivers than for other drinkers. Implications of our findings for public policy, including incapacitation, treatment, and educational interventions, are discussed. PMID:24603444

DriveID: safety innovation through individuation.

PubMed

Sawyer, Ben; Teo, Grace; Mouloua, Mustapha

2012-01-01

The driving task is highly complex and places considerable perceptual, physical and cognitive demands on the driver. As driving is fundamentally an information processing activity, distracted or impaired drivers have diminished safety margins compared with non- distracted drivers (Hancock and Parasuraman, 1992; TRB 1998 a & b). This competition for sensory and decision making capacities can lead to failures that cost lives. Some groups, teens and elderly drivers for example, have patterns of systematically poor perceptual, physical and cognitive performance while driving. Although there are technologies developed to aid these different drivers, these systems are often misused and underutilized. The DriveID project aims to design and develop a passive, automated face identification system capable of robustly identifying the driver of the vehicle, retrieve a stored profile, and intelligently prescribing specific accident prevention systems and driving environment customizations.

Guidelines For The Use, Design, And Construction Of Bridge Approach Slabs

DOT National Transportation Integrated Search

1999-11-01

Differential settlement at the roadway/bridge interface typically results in an abrupt grade change, causing driver discomfort impairing driver safety, and exerting potentially excessive impact traffic loading on the abutment. Bridge approach slabs a...

Design and evaluation of steering protection for avoiding collisions during a lane change.

PubMed

Itoh, Makoto; Inagaki, Toshiyuki

2014-01-01

This paper discusses the design of a driver assistance system for avoiding collisions with vehicles in blind spots. The following three types of support systems are compared: (1) a warning system that provides the driver with an auditory alert, (2) a 'soft' protection system that makes the steering wheel stiffer to tell the driver that a lane-change manoeuvre is not recommended and (3) a 'hard' protection system that cancels the driver's input and controls the tyre angle autonomously to prevent lane departure. The results of an experiment showed that the hard protection system was more effective for collision avoidance than either the warning or the soft protection system. The warning and soft protection systems were almost the same in terms of collision avoidance. The results suggest that the human-centred automation principle, which requires the human to have the final authority over the automation, can be violated depending on the context.

Understanding commercial truck drivers' decision-makin process concerning distracted driving.

PubMed

Swedler, David I; Pollack, Keshia M; Gielen, Andrea C

2015-05-01

A concurrent mixed methods design was used to explore personal and workplace factors, informed by the Theory of Planned Behavior, that affect truck drivers' decision-making about distracted driving on the job. Qualitative data were collected via semi-structured interviews with experts in truck safety and distracted driving, and quantitative data were collected via online survey of truck drivers in the United States. Findings from the interviews illustrated how drivers perceived distractions and the importance of supervisors enforcing organizational distracted driving policies. Survey results found that behavioral intentions were most important in regards to texting and crash and near-crash outcomes, while perceived norms from management best described the correlation between dispatch device use and negative crash-related outcomes. By using a mixed methods design, rather than two separate studies, these findings revealed nuanced differences into the influence of supervisors on distracted driving. Copyright © 2015 Elsevier Ltd. All rights reserved.

IGBT Gate Driver Upgrades to the HVCM at the SNS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Solley, Dennis J; Anderson, David E; Patel, Gunjan P

2012-01-01

The SNS at ORNL has been fully operational since 2006 and in September 2009, the design goal of 1MW of sustained beam power on target was achieved. Historically, the high voltage converter modulators (HVCM) have been a known problem area and, in order to reach another SNS milestone of 90% availability, a new gate driver was one of several areas targeted to improve the overall reliability of the HVCM systems. The drive capability and fault protection of the large IGBT modules in the HVCM were specifically addressed to improve IGBT switching characteristics and provide enhanced troubleshooting and monitoring capabilities formore » the critical IGBT/driver pair. This paper outlines the work involved; the result obtained and documents the driver s long-term performance. Enhanced features, designed to be used in conjunction with a new controller presently under development, will also be discussed.« less

The influence of highly automated driving on the self-perception of drivers in the context of Conduct-by-Wire.

PubMed

Kauer, Michaela; Franz, Benjamin; Maier, Alexander; Bruder, Ralph

2015-01-01

Today, new driving paradigms are being introduced that aim to reduce the number of standalone driver assistance systems by combining these into one overarching system. This is done to reduce the demands on drivers but often leads to a higher degree of automation. Feasibility and driver behaviour are often the subject of studies, but this is contrasted by a lack of research into the influence of highly automated driving on the self-perception of drivers. This article begins to close this gap by investigating the influences of one highly automated driving concept--Conduct-by-Wire--on the self-perception of drivers via a combined driving simulator and interview study. The aim of this work is to identify changes in the role concept of drivers indicated by highly automated driving, to evaluate these changes from the drivers' point of view and to give suggestions of possible improvements to the design of highly automated vehicles.

Transportation use in community-dwelling older adults: association with participation and leisure activities.

PubMed

Dahan-Oliel, Noémi; Mazer, Barbara; Gélinas, Isabelle; Dobbs, Bonnie; Lefebvre, Hélène

2010-12-01

This article presents a study that compared participation by elderly individuals living in the community according to primary transportation mode used, and estimated the association between transportation, personal factors, and environmental factors. Participants included 90 adults aged 65 and older (M=76.3 years; SD=7.7). They were classified according to their primary transportation mode: driver, passenger, public transport user, walk, or adapted transport/taxi user. Participation was measured with the Craig Handicap Assessment and Reporting Technique (CHART) and the Nottingham Leisure Questionnaire (NLQ). Overall, results indicated that drivers, public transport users, and walkers had higher participation levels compared to passengers and adapted transport/taxi users. This study suggests that clinicians should consider older adults' use of transportation in an attempt to encourage and maximize their participation.

Negotiating a Systems Development Method

NASA Astrophysics Data System (ADS)

Karlsson, Fredrik; Hedström, Karin

Systems development methods (or methods) are often applied in tailored version to fit the actual situation. Method tailoring is in most the existing literature viewed as either (a) a highly rational process with the method engineer as the driver where the project members are passive information providers or (b) an unstructured process where the systems developer makes individual choices, a selection process without any driver. The purpose of this chapter is to illustrate that important design decisions during method tailoring are made by project members through negotiation. The study has been carried out using the perspective of actor-network theory. Our narratives depict method tailoring as more complex than (a) and (b) show the driver role rotates between the project members, and design decisions are based on influences from several project members. However, these design decisions are not consensus decisions.

Combined effects of compact cevelopment, transportation investments, and road user pricing on vehicle miles traveled in urbanized areas

USGS Publications Warehouse

Ewing, Reid; Hamidi, Shima; Gallivan, Frank; Nelson, Arthur C.; Grace, James B.

2014-01-01

Vehicle miles traveled (VMT) is the primary determinant of traffic congestion, vehicle crashes, greenhouse gas emissions, and other effects of transportation. Two previous studies have sought to explain VMT levels in urbanized areas. This study updates and expands on previous work with more recent data, additional metrics, and structural equation modeling (SEM) to explain VMT levels in 315 urbanized areas. According to SEM, population, income, and gasoline prices are primary exogenous drivers of VMT. Development density is a primary endogenous driver. Urbanized areas with more freeway capacity are significantly less dense and have significantly higher VMT per capita. Areas with more transit service coverage and service frequency have higher development densities and per capita transit use, which leads to lower VMT per capita. The indirect effect of transit on VMT through land use, the so-called land use multiplier, is more than three times greater than the direct effect through transit ridership.

Insights into workplace bullying: psychosocial drivers and effective interventions

PubMed Central

Escartín, Jordi

2016-01-01

Research on effectiveness of workplace bullying interventions has lagged behind descriptive studies on this topic. The literature on bullying intervention research has only recently expanded to a point that allows for synthesis of findings across empirical studies. This study addresses the question of whether workplace bullying can be reduced in prevalence and consequences, if so to what extent and by which strategies and interventions. It opens with a brief overview of the nature of bullying at work and discussion of some precursors and existing interventions. However, its principal focus is on the findings obtained from selected (quasi-) experimental longitudinal studies on antibullying interventions, drawing together the results of studies conducted in Europe, USA, and Australia, including several economic sectors, and concerned about primary, secondary, and tertiary prevention programs and strategies. Additional emphasis is considered from the psychosocial drivers highlighted both from prescriptive and cross-sectional studies and factual empirical studies. One randomized control study and seven quasiexperimental longitudinal studies were identified by searching electronic databases and bibliographies and via contact with experts. The majority of outcomes evidenced some level of change, mostly positive, suggesting that workplace bullying interventions are more likely to affect knowledge, attitudes, and self-perceptions, but actual bullying behaviors showed much more mixed results. In general, growing effectiveness was stated as the level of intervention increased from primary to tertiary prevention. However, methodological problems relating to the evaluation designs in most studies do not allow direct attribution of these findings to the interventions. Overall, the evaluation of antibullying interventions must flourish and be improved, requiring close cooperation between practitioners and academics to design, implement, and evaluate effective interventions based on grounded theoretical and methodological approaches. Finally, this systematic review highlights future directions for enhancing the adoption, high-quality implementation, and dissemination of evidence-based workplace bullying prevention and intervention programs. PMID:27382343

[The ability of drivers to give first aid--testing by questionnaire].

PubMed

Goniewicz, M

1998-01-01

Road accidents have become a serious social problem. The scale and complexity of this problem shows clearly that there is a necessity to improve citizens' ability to give first aid which is especially essential in the case of drivers. Thus special training how to give first aid at the accident place seems to be of the primary importance. The objective of this paper is to: 1) identify to what extent the drivers of motor vehicles are prepared to provide first aid for casualties of the road accidents, 2) evaluate the training system of teaching motorists how to give first aid before professional help arrives, 3) identify drivers' views on possibilities of decreasing the number of fatal casualties of the road accidents. The questionnaire was given to 560 employees of local government institutions in the city of Lublin either professional or non-professional drivers. The direct method and anonymous questionnaire were used. The results of the questionnaire revealed clearly that very few drivers are well-prepared to give proper first aid at the accident site. No matter what sex, education or driving experience, the drivers have not got enough skills to give first aid and the effect is enhanced by various psychological barriers. The questioned drivers shared the opinion that first aid training is badly run. The drivers stressed bad quality of the training and the fact that it is impossible to acquire practical skills that may be required in the case of emergency. Drivers' views on possibilities of decreasing the number of fatal casualties of the road accidents included, among others, the following propositions: in addition to the driving licence exam first aid exam should be compulsory severe enforcement and execution of the law which regulates the mandatory first aid giving.

Effects of congestion on drivers' speed choice: Assessing the mediating role of state aggressiveness based on taxi floating car data.

PubMed

Huang, Yizhe; Sun, Daniel Jian; Zhang, Li-Hui

2018-08-01

Inappropriate cruising speed, such as speeding, is one of the major contributors to the road safety, which increases both the quantitative number and severity of traffic accidents. Previous studies have indicated that traffic congestion is one of the primary causes of drivers' frustration and aggression, which may lead to inappropriate speed choice. In this study, the large taxi floating car data (FCD) was used to empirically evaluate how traffic congestion-related negative moods, defined as state aggressiveness, affected drivers' speed choice. The indirect effect of traffic delay on the cruising speed adjustment through the state aggressiveness was assessed through the mediation analysis. Furthermore, the moderated mediation analysis was performed to explore the effect of driver type, value of time, and working duration on the mediation role of state aggressiveness. The results proved that the state aggressiveness was the mediator of the relationship between travel delays and driving speed adjustment, and the mediation role was different across various driver types. As compared to the aggressive drivers, the normal drivers and the steady drivers tended to behave more aggressively after experiencing non-recurrent congestion during the early stage of the trips. When the value of time was high, steady drivers were more likely to adjust their speed choice although the effect was not statistically significant for other driver types. The validation results indicated that the speed model incorporating state aggressiveness could better predict the travel time than the traditional speed model that only considering the specific expected speed distribution. The prediction results for the manifest indicators of state aggressiveness, such as the maximum speed and the speed deviation, also demonstrated a reasonable reflection of the field data. Copyright © 2018 Elsevier Ltd. All rights reserved.

Can variations in visual behavior measures be good predictors of driver sleepiness? A real driving test study.

PubMed

Wang, Yonggang; Xin, Mengyang; Bai, Han; Zhao, Yangdong

2017-02-17

The primary purpose of this study was to examine the association between variations in visual behavior measures and subjective sleepiness levels across age groups over time to determine a quantitative method of measuring drivers' sleepiness levels. A total of 128 volunteer drivers in 4 age groups were asked to finish 2-, 3-, and 4-h continuous driving tasks on expressways, during which the driver's fixation, saccade, and blink measures were recorded by an eye-tracking system and the subjective sleepiness level was measured through the Stanford Sleepiness Scale. Two-way repeated measures analysis of variance was then used to examine the change in visual behavior measures across age groups over time and compare the interactive effects of these 2 factors on the dependent visual measures. Drivers' visual behavior measures and subjective sleepiness levels vary significantly over time but not across age groups. A statistically significant interaction between age group and driving duration was found in drivers' pupil diameter, deviation of search angle, saccade amplitude, blink frequency, blink duration, and closure duration. Additionally, change in a driver's subjective sleepiness level is positively or negatively associated with variation in visual behavior measures, and such relationships can be expressed in regression models for different period of driving duration. Driving duration affects drivers' sleepiness significantly, so the amount of continuous driving time should be strictly controlled. Moreover, driving sleepiness can be quantified through the change rate of drivers' visual behavior measures to alert drivers of sleepiness risk and to encourage rest periods. These results provide insight into potential strategies for reducing and preventing traffic accidents and injuries.

Impact of gender, organized athletics, and video gaming on driving skills in novice drivers

PubMed Central

Miller, Gregory A.

2018-01-01

Given that novice drivers tend to be young, and teenagers and young adult drivers are involved in the greatest number of accidents, it is important that we understand what factors impact the driving skills of this population of drivers. The primary aim of the present study was to understand the impact of gender, organized athletics, and video gaming on driving skills of novice drivers under real-world driving conditions. Novice driving students having less than five hours driving experience previous to a normal driving lesson were evaluated on their self-confidence (self-reported) prior to the lesson and driving skill evaluated by their instructor during the course of the lesson. Information was collected about gender, age, whether or not the students were involved in organized athletics, and the extent of their video game playing. There was no impact of gender or extent of video game playing on driving skills. Females were significantly less self-confident with driving than males, but this did not translate to gender differences in driving skills. Being involved in organized athletics—either currently or in the past—significantly enhanced driving skills in both females and males. Finally, novice drivers’ age was negatively correlated with driving skills. That is, younger novice drivers (especially males) had better driving skills than older novice drivers. This is counter to popular belief that young drivers lack technical driving skills because they have less experience behind the wheel. Based on the results of the current study, we hypothesize that the relatively high accident rate of younger drivers (especially male drivers) is most likely due to inattention to safety considerations rather than lack of technical driving ability. PMID:29364957

Automatic Recognition of Road Signs

NASA Astrophysics Data System (ADS)

Inoue, Yasuo; Kohashi, Yuuichirou; Ishikawa, Naoto; Nakajima, Masato

2002-11-01

The increase in traffic accidents is becoming a serious social problem with the recent rapid traffic increase. In many cases, the driver"s carelessness is the primary factor of traffic accidents, and the driver assistance system is demanded for supporting driver"s safety. In this research, we propose the new method of automatic detection and recognition of road signs by image processing. The purpose of this research is to prevent accidents caused by driver"s carelessness, and call attention to a driver when the driver violates traffic a regulation. In this research, high accuracy and the efficient sign detecting method are realized by removing unnecessary information except for a road sign from an image, and detect a road sign using shape features. At first, the color information that is not used in road signs is removed from an image. Next, edges except for circular and triangle ones are removed to choose sign shape. In the recognition process, normalized cross correlation operation is carried out to the two-dimensional differentiation pattern of a sign, and the accurate and efficient method for detecting the road sign is realized. Moreover, the real-time operation in a software base was realized by holding down calculation cost, maintaining highly precise sign detection and recognition. Specifically, it becomes specifically possible to process by 0.1 sec(s)/frame using a general-purpose PC (CPU: Pentium4 1.7GHz). As a result of in-vehicle experimentation, our system could process on real time and has confirmed that detection and recognition of a sign could be performed correctly.

Driver education and teen crashes and traffic violations in the first two years of driving in a graduated licensing system.

PubMed

Shell, Duane F; Newman, Ian M; Córdova-Cazar, Ana Lucía; Heese, Jill M

2015-09-01

Our primary research question was whether teens obtaining their intermediate-level provisional operators permit (POP) in a graduated driver licensing (GDL) environment through driver education differed in crashes and traffic violations from teens who obtained their POP by completing a supervised driving certification log without taking driver education. A descriptive epidemiological study examining a census of all teen drivers in Nebraska (151,880 teens, 48.6% girls, 51.4% boys) during an eight year period from 2003 to 2010 was conducted. The driver education cohort had significantly fewer crashes, injury or fatal crashes, violations, and alcohol-related violations than the certification log cohort in both years one and two of driving following receipt of the POP. Hierarchical logistic regression was conducted, controlling for gender, race/ethnicity, median household income, urban-rural residence, and age receiving the POP. In both year one and two of driving, teens in the certification log cohort had higher odds of a crash, injury or fatal crash, violation, or alcohol-related violation. Findings support that relative to a supervised driving certification log approach, teens taking driver education are less likely to be involved in crashes or to receive a traffic violation during their first two years of driving in an intermediate stage in a graduated driver licensing system. Because teen crash and fatality rates are highest at ages 16-18, these reductions are especially meaningful. Driver education appears to make a difference in teen traffic outcomes at a time when risk is highest. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Quantitative assessment of driving performance in Parkinson's disease

PubMed Central

Wood, J; Worringham, C; Kerr, G; Mallon, K; Silburn, P

2005-01-01

Objectives: The primary aim of this study was to determine how Parkinson's disease (PD) affects driving performance. It also examined whether changes in driver safety were related to specific clinical disease markers or an individual's self rating of driving ability. Methods: The driving performance of 25 patients with idiopathic PD and 21 age matched controls was assessed on a standardised open road route by an occupational therapist and driving instructor, to provide overall safety ratings and specific driving error scores. Results: The drivers with PD were rated as significantly less safe (p<0.05) than controls, and more than half of the drivers with PD would not have passed a state based driving test. The driver safety ratings were more strongly related to disease duration (r = –0.60) than to their on time Unified Parkinson's Disease Rating Scale (r = –0.24). Drivers with PD made significantly more errors than the control group during manoeuvres that involved changing lanes and lane keeping, monitoring their blind spot, reversing, car parking, and traffic light controlled intersections. The driving instructor also had to intervene to avoid an incident significantly more often for drivers with PD than for controls. Interestingly, driver safety ratings were unrelated to an individual's rating of their own driving performance, and this was the case for all participants. Conclusions: As a group, drivers with PD are less safe to drive than age matched controls. Standard clinical markers cannot reliably predict driver safety. Further studies are required to ascertain whether the identified driving difficulties can be ameliorated. PMID:15654027

A driving simulator study of driver performance on deceleration lanes.

PubMed

Calvi, A; Benedetto, A; De Blasiis, M R

2012-03-01

Deceleration lanes are important because they help drivers transition from high-speed lanes to low-speed ramps. Although they are designed to allow vehicles to depart the freeway safely and efficiently, many studies report high accident rates on exit ramps with the highest percentage of crashes taking place in deceleration lanes. This paper describes the results of a driving simulator study that focused on driving performance while approaching a divergence area and decelerating during the exiting maneuver. Three different traffic scenarios were simulated to analyze the influence of traffic volume on driving performance. Thirty drivers drove in the simulator in these scenarios while data on their lateral position, speed and deceleration were collected. Our results indicate there are considerable differences between the main assumptions of models generally used to design deceleration lanes and actual driving performance. In particular, diverging drivers begin to decelerate before arriving at the deceleration lane, causing interference with the main flow. Moreover, speeds recorded at the end of the deceleration lane exceed those for which the ramp's curves are designed; this creates risky driving conditions that could explain the high crash rates found in studies of exit ramps. Finally, statistical analyses demonstrate significant influences of traffic volume on some aspects of exiting drivers' performance: lower traffic volume results in elevated exiting speed and deceleration, and diverging drivers begin to decelerate earlier along the main lane when traffic volume is low. However, speeds at the end of the deceleration lane and the site of lane changing are not significantly influenced by traffic volume. Copyright © 2011 Elsevier Ltd. All rights reserved.

Integrating fuel treatment into ecosystem management: A proposed project planning process

Treesearch

Keith D. Stockmann; Kevin D. Hyde; J. Greg Jones; Dan R. Loeffler; Robin P. Silverstein

2010-01-01

Concern over increased wildland fire threats on public lands throughout the western United States makes fuel reduction activities the primary driver of many management projects. This single-issue focus recalls a management planning process practiced frequently in recent decades - a least-harm approach where the primary objective is first addressed and then plans are...

Driver or passenger effects of augmented c-Myc and Cdc20 in gliomagenesis.

PubMed

Ji, Ping; Zhou, Xinhui; Liu, Qun; Fuller, Gregory N; Phillips, Lynette M; Zhang, Wei

2016-04-26

Cdc20 and c-Myc are commonly overexpressed in a broad spectrum of cancers, including glioblastoma (GBM). Despite this clear association, whether c-Myc and Cdc20 overexpression is a driver or passenger event in gliomagenesis remains unclear. Both c-Myc and Cdc20 induced the proliferation of primary glial progenitor cells. c-Myc also promoted the formation of soft agar anchorage-independent colonies. In the RCAS/Ntv-a glia-specific transgenic mouse model, c-Myc increased the GBM incidence from 19.1% to 47.4% by 12 weeks of age when combined with kRas and Akt3 in Ntv-a INK4a-ARF (also known as CDKN2A)-null mice. In contrast, Cdc20 decreased the GBM incidence from 19.1% to 9.1%. Moreover, cell differentiation was modulated by c-Myc in kRas/Akt3-induced GBM on the basis of Nestin/GFAP expression (glial progenitor cell differentiation), while Cdc20 had no effect on primary glial progenitor cell differentiation. We used glial progenitor cells from Ntv-a newborn mice to evaluate the role of c-Myc and Cdc20 in the proliferation and transformation of GBM in vitro and in vivo. We further determined whether c-Myc and Cdc20 have a driver or passenger role in GBM development using kRas/Akt3 signals in a RCAS/Ntv-a mouse model. These results suggest that the driver or passenger of oncogene signaling is dependent on cellular status. c-Myc is a driver when combined with kRas/Akt3 oncogenic signals in gliomagenesis, whereas Cdc20 overexpression is a passenger. Inhibition of cell differentiation of c-Myc may be a target for anti-glioma therapy.

Risk Factors for Cardiovascular Disease, Metabolic Syndrome and Sleepiness in Truck Drivers.

PubMed

Mansur, Antonio de Padua; Rocha, Marcos Abs; Leyton, Vilma; Takada, Julio Yashio; Avakian, Solange Desirée; Santos, Alexandre J; Novo, Gisele C; Nascimento, Arledson Lima; Muñoz, Daniel Romero; Rohlfs, Waldo J C

2015-12-01

Truck driver sleepiness is a primary cause of vehicle accidents. Several causes are associated with sleepiness in truck drivers. Obesity and metabolic syndrome (MetS) are associated with sleep disorders and with primary risk factors for cardiovascular diseases (CVD). We analyzed the relationship between these conditions and prevalence of sleepiness in truck drivers. We analyzed the major risk factors for CVD, anthropometric data and sleep disorders in 2228 male truck drivers from 148 road stops made by the Federal Highway Police from 2006 to 2011. Alcohol consumption, illicit drugs and overtime working hours were also analyzed. Sleepiness was assessed using the Epworth Sleepiness Scale. Mean age was 43.1 ± 10.8 years. From 2006 to 2011, an increase in neck (p = 0.011) and abdominal circumference (p < 0.001), total cholesterol (p < 0.001), triglyceride plasma levels (p = 0.014), and sleepiness was observed (p < 0.001). In addition, a reduction in hypertension (39.6% to 25.9%, p < 0.001), alcohol consumption (32% to 23%, p = 0.033) and overtime hours (52.2% to 42.8%, p < 0.001) was found. Linear regression analysis showed that sleepiness correlated closely with body mass index (β = 0.19, Raj2 = 0.659, p = 0.031), abdominal circumference (β = 0.24, Raj2 = 0.826, p = 0.021), hypertension (β = -0.62, Raj2 = 0.901, p = 0.002), and triglycerides (β = 0.34, Raj2 = 0.936, p = 0.022). Linear multiple regression indicated that hypertension (p = 0.008) and abdominal circumference (p = 0.025) are independent variables for sleepiness. Increased prevalence of sleepiness was associated with major components of the MetS.

Design Considerations of a Novel Two-Beam Accelerator

NASA Astrophysics Data System (ADS)

Luginsland, John William

This thesis reports the design study of a new type of charged particle accelerator called the Twobetron. The accelerator consists of two beams of electrons traveling through a series of pillbox cavities. The power of a high current annular beam excites an electromagnetic mode in the cavities, which, in turn, drives a low current on-axis pencil beam to high energy. We focus on the design considerations that would make use of existing pulsed power systems, for a proof-of-principle experiment. Potential applications of this new device include radiotherapy, materials processing, and high energy accelerators. The first phase of the research involves analytic description of the accelerating process. This reveals the problem of phase slippage. Derbenev's proposed cure of beam radius modulation is analyzed. Further studies include the effect of initial phase and secondary beam loading. Scaling laws to characterize the Twobetron's performance are derived. Computer simulation is performed to produce a self-consistent analysis of the dynamics of the space charge and its interaction with the accelerator structure. Particle -in-cell simulations answer several questions concerning beam stability, cavity modes, and the nature of the structure. Specifically, current modulation on the primary beam is preserved in the simulations. However, these simulations also revealed that mode competition and significant cavity coupling are serious issues that need to be addressed. Also considered is non-axisymmetric instability on the driver beam of the Twobetron, in particular, the beam breakup instability (BBU), which is known to pose a serious threat to linear accelerators in general. We extend the classical analysis of BBU to annular beams. The effect of higher order non-axisymmetric modes is also examined. It is shown that annular beams are more stable than pencil beams to BBU in general. Our analysis also reveals that the rf magnetic field is more important than the rf electric field in contributing to BBU growth. We next address the issue of primary beam modulation. Both particle-in-cell and analytic investigation showed that the usual relativistic klystron amplifiers (RKA) mechanism cannot provide full beam modulation at convenient levels of external rf drive. However, the recent discovery at the Air Force Phillips Laboratory of the injection locked relativistic klystron oscillator suggests that electromagnetic feedback between the driver cavity and the booster cavity might significantly enhance the current modulation. A simple model is constructed to analyze this cavity coupling and its mutual interaction with the primary beam. Quantitative agreement is found between our model and the Phillips Laboratory experiments. This analysis suggests that significant current modulation on the primary beam may be achieved with low level external rf drive.

Low-jitter high-power thyristor array pulse driver and generator

DOEpatents

Hanks, Roy L.

2002-01-01

A method and apparatus for generating low-jitter, high-voltage and high-current pulses for driving low impedance loads such as detonator fuses uses a MOSFET driver which, when triggered, discharges a high-voltage pre-charged capacitor into the primary of a toroidal current-multiplying transformer with multiple isolated secondary windings. The secondary outputs are suitable for driving an array of thyristors that discharge a precharged high-voltage capacitor and thus generating the required high-voltage and high-current pulse.

Multivariable Parametric Cost Model for Ground Optical: Telescope Assembly

NASA Technical Reports Server (NTRS)

Stahl, H. Philip; Rowell, Ginger Holmes; Reese, Gayle; Byberg, Alicia

2004-01-01

A parametric cost model for ground-based telescopes is developed using multi-variable statistical analysis of both engineering and performance parameters. While diameter continues to be the dominant cost driver, diffraction limited wavelength is found to be a secondary driver. Other parameters such as radius of curvature were examined. The model includes an explicit factor for primary mirror segmentation and/or duplication (i.e. multi-telescope phased-array systems). Additionally, single variable models based on aperture diameter were derived.

A Study of Free-Piston Double-Diaphragm Drivers for Expansion Tubes. Report 1

NASA Technical Reports Server (NTRS)

Kendall, M. A.

1997-01-01

In recent years the free-piston double-diaphragm driver has been used to increase the performance of the XI pilot expansion tube to super-orbital test conditions. However, the actual performance of the double-diaphragm driver was found to be considerably less than ideal. An experimental study of the double-diaphragm driver was carried out on the XI facility over a range of conditions with the objective of determining the effect of. heat losses; and the non-ideal rupture of the 'light' secondary diaphragm on the driver performance. The disparity between the theoretical and measured performance envelope are highlighted. A viscous limit for the experiments vas established. Heat transfer behind the primary shock is shown to be the mechanism behind this limit Incident, reflected and transmitted shock trajectories for the secondary diaphragm were experimentally determined and compared with computed trajectories from a one-dimensional diaphragm inertia model. It was found that the diaphragm did influence the unsteady expansion. A good agreement between experimental and computed shock trajectories was obtained using a diaphragm inertia model assuming that the diaphragm mass became negligible 3 microns after shock impact.

“Every disease…man can get can start in this cab”: Focus groups to identify South Asian taxi drivers’ knowledge, attitudes and beliefs about cardiovascular disease and its risks

PubMed Central

Gany, Francesca M; Gill, Pavan P; Ahmed, Ayaz; Acharya, Sudha; Leng, Jennifer

2017-01-01

Background South Asian (SA) taxi drivers potentially possess a double epidemiologic risk for cardiovascular disease (CVD) due to their ethnicity and occupation. This study investigates SA taxi drivers’ knowledge, attitudes, beliefs about general health, CVD and approaches to reduce CVD risk. Method Five focus groups were conducted with 31 SA taxi drivers in the participants’ primary language (Bengali, Hindi, Urdu or Punjabi). Audio-recordings of the sessions were transcribed, translated and entered into ATLAS.ti 6.2 for coding and analysis. Results SA drivers in an urban setting perceive themselves to be at high risk for CVD because of high work-related stress, physical inactivity, poor diet and poor health care access. Participants attributed their occupation to increasing risk for heart disease; none believed that being SA increased their risk. Discussion Interventions to lower CVD risk among SA taxi drivers should be multi-level and involve the individual drivers and the taxi industry. PMID:22843321

Atrial fibrillation driver mechanisms: Insight from the isolated human heart.

PubMed

Csepe, Thomas A; Hansen, Brian J; Fedorov, Vadim V

2017-01-01

Although there have been great technological advances in the treatment of atrial fibrillation (AF), current therapies remain limited due to a narrow understanding of AF mechanisms in the human heart. This review will highlight our recent studies on explanted human hearts where we developed and employed a novel functional-structural mapping approach by integrating high-resolution simultaneous endo-epicardial and panoramic optical mapping with 3D gadolinium-enhanced MRI to define the spatiotemporal characteristics of AF drivers and their structural substrates. The results allow us to postulate that the primary mechanism of AF maintenance in human hearts is a limited number of localized intramural microanatomic reentrant AF drivers anchored to heart-specific 3D fibrotically insulated myobundle tracks, which may remain hidden to clinical single-surface electrode mapping. We suggest that ex vivo human heart studies, by using an integrated 3D functional and structural mapping approach, will help to reveal defining features of AF drivers as well as validate and improve clinical approaches to detect and target these AF drivers in patients with cardiac diseases. Copyright © 2016 Elsevier Inc. All rights reserved.

ALCOHOL AND DISTRACTION INTERACT TO IMPAIR DRIVING PERFORMANCE

PubMed Central

Harrison, Emily L. R.; Fillmore, Mark T.

2011-01-01

Background Recognition of the risks associated with alcohol intoxication and driver distraction has led to a wealth of simulated driving research aimed at studying the adverse effects of each of these factors. Research on driving has moved beyond the individual, separate examination of these factors to the examination of potential interactions between alcohol intoxication and driver distraction. In many driving situations, distractions are commonplace and might have little or no disruptive influence on primary driving functions. Yet, such distractions might become disruptive to a driver who is intoxicated. Methods The present study examined the interactive impairing effects of alcohol intoxication and driver distraction on simulated driving performance in 40 young adult drivers using a divided attention task as a distracter activity. The interactive influence of alcohol and distraction was tested by having drivers perform the driving task under four different conditions: 0.65 g/kg alcohol; 0.65 g/kg alcohol + divided attention; placebo; and placebo + divided attention. Results As hypothesized, divided attention had no impairing effect on driving performance in sober drivers. However, under alcohol, divided attention exacerbated the impairing effects of alcohol on driving precision. Conclusions Alcohol and distraction continue to be appropriate targets for research into ways to reduce the rates of driving-related fatalities and injuries. Greater consideration of how alcohol and distraction interact to impair aspects of driving performance can further efforts to create prevention and intervention measures to protect drivers, particularly young adults. PMID:21277119

Alcohol and distraction interact to impair driving performance.

PubMed

Harrison, Emily L R; Fillmore, Mark T

2011-08-01

Recognition of the risks associated with alcohol intoxication and driver distraction has led to a wealth of simulated driving research aimed at studying the adverse effects of each of these factors. Research on driving has moved beyond the individual, separate examination of these factors to the examination of potential interactions between alcohol intoxication and driver distraction. In many driving situations, distractions are commonplace and might have little or no disruptive influence on primary driving functions. Yet, such distractions might become disruptive to a driver who is intoxicated. The present study examined the interactive impairing effects of alcohol intoxication and driver distraction on simulated driving performance in 40 young adult drivers using a divided attention task as a distracter activity. The interactive influence of alcohol and distraction was tested by having drivers perform the driving task under four different conditions: 0.65 g/kg alcohol; 0.65 g/kg alcohol+divided attention; placebo; and placebo+divided attention. As hypothesized, divided attention had no impairing effect on driving performance in sober drivers. However, under alcohol, divided attention exacerbated the impairing effects of alcohol on driving precision. Alcohol and distraction continue to be appropriate targets for research into ways to reduce the rates of driving-related fatalities and injuries. Greater consideration of how alcohol and distraction interact to impair aspects of driving performance can further efforts to create prevention and intervention measures to protect drivers, particularly young adults. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Behind the Wheel: Predictors of Driving Exposure in Older Drivers.

PubMed

Coxon, Kristy; Chevalier, Anna; Lo, Serigne; Ivers, Rebecca; Brown, Julie; Keay, Lisa

2015-06-01

To explore and deepen understanding of factors influencing driving exposure for older drivers. Cross-sectional. Baseline data on function and driving exposure from 1 week of driving were evaluated. A convenience sample of 380 drivers aged 75 and older, residing in northwest Sydney, was recruited. Participants were required to be the primary drivers of their own vehicle. Driver function was evaluated using the DriveSafe and DriveAware clinic-based assessments to measure visual attention to the driving environment and awareness of driving ability. Demographic information was obtained through interview. An in-vehicle monitoring device with data logger and GPS receiver, was used to measure driving exposure in 362 of 380 participants' vehicles. Driving exposure outcomes were total distance driven, furthest distance traveled from home, and average trip length. Factors influencing these exposure outcomes were analyzed using generalized linear regression. Drivers typically drove 100 km in local and surrounding areas during the week. Function was predictive of all driving exposure outcomes. Drivers with lower levels of function drove fewer kilometers and took shorter trips closer to home. Age, health status, and personal circumstance (e.g., rural residence) also influenced exposure, but sex did not. Using objective measures, this study provides evidence that function, age, health status, and personal circumstance influence driving exposure of older drivers. Understanding how older people use driving to preserve their independence is important for exploring safe driving strategies for older people. © 2015, Copyright the Authors Journal compilation © 2015, The American Geriatrics Society.

Design of a Fatigue Detection System for High-Speed Trains Based on Driver Vigilance Using a Wireless Wearable EEG

PubMed Central

Zhang, Xiaoliang; Li, Jiali; Liu, Yugang; Zhang, Zutao; Wang, Zhuojun; Luo, Dianyuan; Zhou, Xiang; Zhu, Miankuan; Salman, Waleed; Hu, Guangdi; Wang, Chunbai

2017-01-01

The vigilance of the driver is important for railway safety, despite not being included in the safety management system (SMS) for high-speed train safety. In this paper, a novel fatigue detection system for high-speed train safety based on monitoring train driver vigilance using a wireless wearable electroencephalograph (EEG) is presented. This system is designed to detect whether the driver is drowsiness. The proposed system consists of three main parts: (1) a wireless wearable EEG collection; (2) train driver vigilance detection; and (3) early warning device for train driver. In the first part, an 8-channel wireless wearable brain-computer interface (BCI) device acquires the locomotive driver’s brain EEG signal comfortably under high-speed train-driving conditions. The recorded data are transmitted to a personal computer (PC) via Bluetooth. In the second step, a support vector machine (SVM) classification algorithm is implemented to determine the vigilance level using the Fast Fourier transform (FFT) to extract the EEG power spectrum density (PSD). In addition, an early warning device begins to work if fatigue is detected. The simulation and test results demonstrate the feasibility of the proposed fatigue detection system for high-speed train safety. PMID:28257073

Guidelines and Recommendations to Accommodate Older Drivers and Pedestrians

DOT National Transportation Integrated Search

2001-05-01

This project updated, revised, and expanded the scope of the "Older Driver Highway Design Handbook" published by the Federal Highway Administration (FHWA) in 1998. Development of the updated Handbook (FHWA-RD-01-103) was complemented by a technology ...

Guidelines and Recommendations to Accommodate Older Drivers and Pedestrians

DOT National Transportation Integrated Search

2001-10-01

This project updated, revised, and expanded the scope of the "Older Driver Highway Design Handbook" published by the Federal Highway Administration (FHWA) in 1998. Development of the updated Handbook (FHWA-RD-01-103) was complemented by a technology ...

Investigation Of Alternative Displays For Side Collision Avoidance Systems, Final Report

DOT National Transportation Integrated Search

1996-12-01

DRIVER-VEHICLE INTERFACE OR DVI, HUMAN FACTORS, DRIVER PREFERENCES, INTELLIGENT VEHICLE INITIATIVE OR IVI : SIDE COLLISION AVOIDANCE SYSTEMS (SCAS) ARE DESIGNED TO WARN OF IMPENDING COLLISIONS AND CAN DETECT NOT ONLY ADJACENT VEHICLES BUT VEHICLES...

On an efficient and effective intelligent transportation system (ITS) safety and traffic efficiency application with corresponding driver behavior

NASA Astrophysics Data System (ADS)

Ekedebe, Nnanna; Yu, Wei; Lu, Chao

2015-06-01

Driver distraction could result in safety compromises attributable to distractions from in-vehicle equipment usage [1]. The effective design of driver-vehicle interfaces (DVIs) and other human-machine interfaces (HMIs) together with their usability, and accessibility while driving become important [2]. Driving distractions can be classified as: visual distractions (any activity that takes your eyes away from the road), cognitive distraction (any activity that takes your mind away from the course of driving), and manual distractions (any activity that takes your hands away from the steering wheel [2]). Besides, multitasking during driving is a distractive activity that can increase the risks of vehicular accidents. To study the driver's behaviors on the safety of transportation system, using an in-vehicle driver notification application, we examined the effects of increasing driver distraction levels on the evaluation metrics of traffic efficiency and safety by using two types of driver models: young drivers (ages 16-25 years) and middle-age drivers (ages 30-45 years). Our evaluation data demonstrates that as a drivers distraction level is increased, less heed is given to change route directives from the in-vehicle on-board unit (OBU) using textual, visual, audio, and haptic notifications. Interestingly, middle-age drivers proved more effective/resilient in mitigating the negative effects of driver distraction over young drivers [2].

The impact of raising the minimum drinking age on driver fatalities.

PubMed

MacKinnon, D P; Woodward, J A

1986-12-01

Time series analysis was used to obtain statistical tests of the impact of raising the drinking age on monthly driver fatalities in Illinois, Michigan, and Massachusetts. A control series design permitted comparison between younger drivers (21 or less years) and older drivers (25 and older) within states where the minimum drinking age was raised. Since the two groups share the same driving conditions, it was important to demonstrate that any reduction in fatalities was limited to the young age group within which the drinking age change occurred. In addition, control states were selected to permit a comparison between driver fatalities of the young age group (21 or less) in states with the law change and young drivers in states without the law change. Significant immediate reductions in fatalities among 21 and younger drivers in Illinois and Michigan were observed after these states raised their minimum drinking age. No significant reductions in any control series were observed. A linear decrease in young driver fatalities was observed after the drinking age was raised in Massachusetts. There was also a significant linear decrease in young driver fatalities in the Connecticut control series, perhaps due to increasing awareness among young drivers of the dangers of drinking and driving.

AGR-3/4 Irradiation Test Predictions using PARFUME

DOE Office of Scientific and Technical Information (OSTI.GOV)

Skerjanc, William Frances; Collin, Blaise Paul

2016-03-01

PARFUME, a fuel performance modeling code used for high temperature gas reactors, was used to model the AGR-3/4 irradiation test using as-run physics and thermal hydraulics data. The AGR-3/4 test is the combined third and fourth planned irradiations of the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. The AGR-3/4 test train consists of twelve separate and independently controlled and monitored capsules. Each capsule contains four compacts filled with both uranium oxycarbide (UCO) unaltered “driver” fuel particles and UCO designed-to-fail (DTF) fuel particles. The DTF fraction was specified to be 1×10-2. This report documents the calculations performed to predictmore » failure probability of TRISO-coated fuel particles during the AGR-3/4 experiment. In addition, this report documents the calculated source term from both the driver fuel and DTF particles. The calculations include the modeling of the AGR-3/4 irradiation that occurred from December 2011 to April 2014 in the Advanced Test Reactor (ATR) over a total of ten ATR cycles including seven normal cycles, one low power cycle, one unplanned outage cycle, and one Power Axial Locator Mechanism cycle. Results show that failure probabilities are predicted to be low, resulting in zero fuel particle failures per capsule. The primary fuel particle failure mechanism occurred as a result of localized stresses induced by the calculated IPyC cracking. Assuming 1,872 driver fuel particles per compact, failure probability calculated by PARFUME leads to no predicted particle failure in the AGR-3/4 driver fuel. In addition, the release fraction of fission products Ag, Cs, and Sr were calculated to vary depending on capsule location and irradiation temperature. The maximum release fraction of Ag occurs in Capsule 7 reaching up to 56% for the driver fuel and 100% for the DTF fuel. The release fraction of the other two fission products, Cs and Sr, are much smaller and in most cases less than 1% for the driver fuel. The notable exception occurs in Capsule 7 where the release fraction for Cs and Sr reach up to 0.73% and 2.4%, respectively, for the driver fuel. For the DTF fuel in Capsule 7, the release fraction for Cs and Sr are estimated to be 100% and 5%, respectively.« less

Supporting anticipation in driving through attentional and interpretational in-vehicle displays.

PubMed

Stahl, Patrick; Donmez, Birsen; Jamieson, Greg A

2016-06-01

This paper evaluates two different types of in-vehicle interfaces to support anticipation in driving: one aids attention allocation and the other aids interpretation of traffic in addition to attention allocation. Anticipation is a competency that has been shown to facilitate safety and eco-driving through the efficient positioning of a vehicle for probable, upcoming changes in traffic. This competency has been shown to improve with driving experience. In an earlier simulator study, we showed that compared to novice drivers, experienced drivers exhibited a greater number of timely actions to avoid upcoming traffic conflicts. In this study, we seek to facilitate anticipation in general and for novice drivers in particular, who appear to lack the competency. We hypothesize that anticipation depends on two major steps and that it can be supported by aiding each: (1) conscious perception of relevant cues, and (2) effective processing of these cues to create a situational assessment as a basis for anticipation of future developments. We conducted a simulator experiment with 24 experienced and 24 novice drivers to evaluate two interfaces that were designed to aid the two hypothesized steps of anticipation. The attentional interface was designed to direct attention toward the most relevant cue. The interpretational interface represented several cues, and in addition to directing attention also aimed to aid sense-making of these cues. The results confirmed our hypothesis that novice drivers' anticipation performance, as measured through timely actions to avoid upcoming traffic conflicts, would be improved with either interface type. However, results contradicted our expectation that novice drivers would obtain larger improvements with the interpretational interface. Experienced drivers performed better than novice drivers to begin with and did not show any statistically significant improvements with either interface. Both interfaces improved anticipation performance for novice drivers. Future research should evaluate the effectiveness of these interfaces in a wider variety of driving conditions, such as when the driver is multitasking. Copyright © 2016 Elsevier Ltd. All rights reserved.

Discovering mutated driver genes through a robust and sparse co-regularized matrix factorization framework with prior information from mRNA expression patterns and interaction network.

PubMed

Xi, Jianing; Wang, Minghui; Li, Ao

2018-06-05

Discovery of mutated driver genes is one of the primary objective for studying tumorigenesis. To discover some relatively low frequently mutated driver genes from somatic mutation data, many existing methods incorporate interaction network as prior information. However, the prior information of mRNA expression patterns are not exploited by these existing network-based methods, which is also proven to be highly informative of cancer progressions. To incorporate prior information from both interaction network and mRNA expressions, we propose a robust and sparse co-regularized nonnegative matrix factorization to discover driver genes from mutation data. Furthermore, our framework also conducts Frobenius norm regularization to overcome overfitting issue. Sparsity-inducing penalty is employed to obtain sparse scores in gene representations, of which the top scored genes are selected as driver candidates. Evaluation experiments by known benchmarking genes indicate that the performance of our method benefits from the two type of prior information. Our method also outperforms the existing network-based methods, and detect some driver genes that are not predicted by the competing methods. In summary, our proposed method can improve the performance of driver gene discovery by effectively incorporating prior information from interaction network and mRNA expression patterns into a robust and sparse co-regularized matrix factorization framework.

Phase I/II study of alectinib in lung cancer with RET fusion gene: study protocol.

PubMed

Takeuchi, Shinji; Murayama, Toshinori; Yoshimura, Kenichi; Kawakami, Takahiro; Takahara, Shizuko; Imai, Yasuhito; Kuribayashi, Yoshikazu; Nagase, Katsuhiko; Goto, Koichi; Nishio, Makoto; Hasegawa, Yoshinori; Satouchi, Miyako; Kiura, Katsuyuki; Seto, Takashi; Yano, Seiji

2017-01-01

The rearranged during transfection (RET) fusion gene was discovered as a driver oncogene in 1-2% of non-small cell lung cancers (NSCLCs). Alectinib is an approved anaplastic lymphoma kinase (ALK) inhibitor that may also be effective for RET fusion-positive NSCLC. RET fusion-positive NSCLC patients treated with at least one regimen of chemotherapy are being recruited. In step 1, alectinib (600 or 450 mg, twice daily) will be administered following a 3+3 design. The primary endpoint is safety. In step 2, alectinib will be administered at the recommended dose (RD) defined by step 1. The primary endpoint is the response rate of RET inhibitor treatment-naïve patients. This is the first study to investigate the safety and preliminary efficacy of alectinib in RET fusion-positive NSCLC patients. If successful, alectinib treatment may lead to substantial and important changes in the management of NSCLC with RET fusion genes. J. Med. Invest. 64: 317-320, August, 2017.

Development of a method to rate the primary safety of vehicles using linked New Zealand crash and vehicle licensing data.

PubMed

Keall, Michael D; Newstead, Stuart

2016-01-01

Vehicle safety rating systems aim firstly to inform consumers about safe vehicle choices and, secondly, to encourage vehicle manufacturers to aspire to safer levels of vehicle performance. Primary rating systems (that measure the ability of a vehicle to assist the driver in avoiding crashes) have not been developed for a variety of reasons, mainly associated with the difficult task of disassociating driver behavior and vehicle exposure characteristics from the estimation of crash involvement risk specific to a given vehicle. The aim of the current study was to explore different approaches to primary safety estimation, identifying which approaches (if any) may be most valid and most practical, given typical data that may be available for producing ratings. Data analyzed consisted of crash data and motor vehicle registration data for the period 2003 to 2012: 21,643,864 observations (representing vehicle-years) and 135,578 crashed vehicles. Various logistic models were tested as a means to estimate primary safety: Conditional models (conditioning on the vehicle owner over all vehicles owned); full models not conditioned on the owner, with all available owner and vehicle data; reduced models with few variables; induced exposure models; and models that synthesised elements from the latter two models. It was found that excluding young drivers (aged 25 and under) from all primary safety estimates attenuated some high risks estimated for make/model combinations favored by young people. The conditional model had clear biases that made it unsuitable. Estimates from a reduced model based just on crash rates per year (but including an owner location variable) produced estimates that were generally similar to the full model, although there was more spread in the estimates. The best replication of the full model estimates was generated by a synthesis of the reduced model and an induced exposure model. This study compared approaches to estimating primary safety that could mimic an analysis based on a very rich data set, using variables that are commonly available when registered fleet data are linked to crash data. This exploratory study has highlighted promising avenues for developing primary safety rating systems for vehicle makes and models.

Thin and thick targets for radioactive ion beam production at SPIRAL1 facility

NASA Astrophysics Data System (ADS)

Jardin, P.; Bajeat, O.; Delahaye, P.; Dubois, M.; Kuchi, V.; Maunoury, L.

2018-05-01

The upgrade of the Système de Production d'Ions Radioactifs Accélérés en Ligne (SPIRAL1) facility will deliver its new Radioactive Ion Beams (RIB) by summer 2017. The goal of the upgrade is an improvement of the performances of the installation in terms of isotopes species and ion charge states [1]. Ion beams are produced using the Isotope Separator On Line Method, consisting in an association of a primary beam of stable ions, a hot target and an ion source. The primary beam impinges on the material of the target. Radioactive isotopes are produced by nuclear reactions and propagate up to the source, where they are ionized and accelerated to create a RIB. One advantage of SPIRAL1 driver is the variety of its available primary beams, from carbon to uranium with energies up to 95 MeV/A. Within the SPIRAL1 upgrade, they will be combined with targets made of a large choice of materials, extending in this way the number of possible nuclear reactions (fusion-evaporation, transfer, fragmentation) for producing a wider range of isotopes, up to regions of the nuclide chart still scarcely explored. Depending on the reaction process, on the collision energy and on the primary beam power, thin and thick targets are used. As their functions can be different, their design must cope with specific constraints which will be described. After a presentation of the goals of present and future SPIRAL1 Target Ion Source System, the main target features, studies and designs under progress are presented.

Changing drivers' minds: the evaluation of an advanced driver coaching system.

PubMed

Stanton, N A; Walker, G H; Young, M S; Kazi, T; Salmon, P M

2007-08-01

This paper reports on the study of an advanced driver coaching system. The study distinguishes between different types of post-licensure programmes in order to explore a system based on a model of identifying and responding to hazards, called 'information, position, speed, gear and acceleration' (IPSGA). Previous literature has been sceptical about the benefits of advanced driver education; thus, the current study was designed to control for the effects of coaching drivers in the 'IPSGA' system (the treatment group) against the effects of being accompanied (control group 1), as well as the mere effects of time (control group 2). Measures were taken before the driver coaching began (as a baseline measure) and again after 8 weeks (to see if any changes had occurred). These measures included driver knowledge via a post-drive interview, observations of driving skill and driver attitude using a locus of control scale. The results suggest that advanced driver coaching using the IPSGA system had a beneficial effect on all of these measures. Drivers in the coaching condition improved their situation awareness, driving skills and reduced attributions of external locus of control. The study lends support to the case for one-to-one individualized driver coaching using a systematic model of driving.

Design of 3x3 Focusing Array for Heavy Ion Driver Final Report on CRADA TC-02082-04

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martovetsky, N.

This memo presents a design of a 3x3 quadrupole array for HIF. It contains 3 D magnetic field computations of the array build with racetrack coils with and without different shields. It is shown that it is possible to have a low error magnetic field in the cells and shield the stray fields to acceptable levels. The array design seems to be a practical solution to any size array for future multi-beam heavy ion fusion drivers.

Integration of ATIS and crash avoidance in-vehicle information : preliminary simulator study

DOT National Transportation Integrated Search

1999-12-01

This study investigated three issues relevant to Advanced Traveler Information System (ATIS) design: (1) the influence of an ATIS on driver performance in reduced visibility conditions, (2) the influence of an ATIS on drivers' reactions to unexpected...

Perspectives on driver preferences for dynamic route guidance systems

DOT National Transportation Integrated Search

1997-01-01

Insights about the design of route guidance systems based on the needs and desires of drivers who are familiar with the travel network are provided. Results from the ADVANCE Intelligent Transportation System operational test, in which more than 100 d...

Guidelines and recommendations to accommodate older driver and pedestrians

DOT National Transportation Integrated Search

2001-05-01

This project updated, revised, and expanded the scope of the Older Driver Highway Design Handbook published by FHWA in 1998. Development of the updated Handbook (FHWA-RD-01-103) was complemented by a technology transfer initiative to make practitione...

Note: An improved solenoid driver valve for miniature shock tubes.

PubMed

Lynch, P T

2016-05-01

A solenoid driver valve has been built to improve the operating performance of diaphragmless shock tubes, which are used for high pressure, high temperature chemical kinetics, and fluid mechanics studies. For shock tube driver application, the most important characteristics are those of sealing, strength, and quality of the generated shock waves and repeatability of opening characteristics and therefore subsequent post-shock conditions. The main features of the new driver valve are a face o-ring sealing design of the valve, the large internal volume, and through inserts near the solenoid core: adjustable opening characteristics of the valve.

An approach to vehicle design: In-depth audit to understand the needs of older drivers.

PubMed

Karali, Sukru; Mansfield, Neil J; Gyi, Diane E

2017-01-01

The population of older people continues to increase around the world, and this trend is expected to continue; the population of older drivers is increasing accordingly. January 2012 figures from the DVLA in the UK stated that there were more than 15 million drivers aged over 60; more than 1 million drivers were aged over 80. There is a need for specific research tools to understand and capture how all users interact with features in the vehicle cabin e.g. controls and tasks, including the specific needs of the increasingly older driving population. This paper describes an in-depth audit that was conducted to understand how design of the vehicle cabin impacts on comfort, posture, usability, health and wellbeing in older drivers. The sample involved 47 drivers (38% female, 62% male). The age distribution was: 50-64 (n = 12), 65-79 (n = 20), and those 80 and over (n = 15). The methodology included tools to capture user experience in the vehicle cabin and functional performance tests relevant to specific driving tasks. It is shown that drivers' physical capabilities reduce with age and that there are associated difficulties in setting up an optimal driving position such that some controls cannot be operated as intended, and many adapt their driving cabins. The cabin set-up process consistently began with setting up the seat and finished with operation of the seat belt. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Secondary foundation species as drivers of trophic and functional diversity: evidence from a tree-epiphyte system.

PubMed

Angelini, Christine; Silliman, Brian R

2014-01-01

Facilitation cascades arise where primary foundation species facilitate secondary (dependent) foundation species, and collectively, they increase habitat complexity and quality to enhance biodiversity. Whether such phenomena occur in nonmarine systems and if secondary foundation species enhance food web structure (e.g., support novel feeding guilds) and ecosystem function (e.g., provide nursery for juveniles) remain unclear. Here we report on field experiments designed to test whether trees improve epiphyte survival and epiphytes secondarily increase the number and diversity of adult and juvenile invertebrates in a potential live oak-Tillandsia usneoides (Spanish moss) facilitation cascade. Our results reveal that trees reduce physical stress to facilitate Tillandsia, which, in turn, reduces desiccation and predation stress to facilitate invertebrates. In experimental removals, invertebrate total density, juvenile density, species richness and H' diversity were 16, 60, 1.7, and 1.5 times higher, and feeding guild richness and H' were 5 and 11 times greater in Tillandsia-colonized relative to Tillandsia-removal limb plots. Tillandsia enhanced communities similarly in a survey across the southeastern United States. These findings reveal that a facilitation cascade organizes this widespread terrestrial assemblage and expand the role of secondary foundation species as drivers of trophic structure and ecosystem function. We conceptualize the relationship between foundation species' structural attributes and associated species abundance and composition in a Foundation Species-Biodiversity (FSB) model. Importantly, the FSB predicts that, where secondary foundation species form expansive and functionally distinct structures that increase habitat availability and complexity within primary foundation species, they generate and maintain hot spots of biodiversity and trophic interactions.

Using narrative text and coded data to develop hazard scenarios for occupational injury interventions

PubMed Central

Lincoln, A; Sorock, G; Courtney, T; Wellman, H; Smith, G; Amoroso, P

2004-01-01

Objective: To determine whether narrative text in safety reports contains sufficient information regarding contributing factors and precipitating mechanisms to prioritize occupational back injury prevention strategies. Design, setting, subjects, and main outcome measures: Nine essential data elements were identified in narratives and coded sections of safety reports for each of 94 cases of back injuries to United States Army truck drivers reported to the United States Army Safety Center between 1987 and 1997. The essential elements of each case were used to reconstruct standardized event sequences. A taxonomy of the event sequences was then developed to identify common hazard scenarios and opportunities for primary interventions. Results: Coded data typically only identified five data elements (broad activity, task, event/exposure, nature of injury, and outcomes) while narratives provided additional elements (contributing factor, precipitating mechanism, primary source) essential for developing our taxonomy. Three hazard scenarios were associated with back injuries among Army truck drivers accounting for 83% of cases: struck by/against events during motor vehicle crashes; falls resulting from slips/trips or loss of balance; and overexertion from lifting activities. Conclusions: Coded data from safety investigations lacked sufficient information to thoroughly characterize the injury event. However, the combination of existing narrative text (similar to that collected by many injury surveillance systems) and coded data enabled us to develop a more complete taxonomy of injury event characteristics and identify common hazard scenarios. This study demonstrates that narrative text can provide the additional information on contributing factors and precipitating mechanisms needed to target prevention strategies. PMID:15314055

Disentangling age–gender interactions associated with risks of fatal and non-fatal road traffic injuries in the Sultanate of Oman

PubMed Central

Al-Aamri, Amira K; Padmadas, Sabu S; Zhang, Li-Chun; Al-Maniri, Abdullah A

2017-01-01

Objective Road traffic injuries (RTIs) are the leading cause of disability-adjusted life years lost in Oman, Saudi Arabia and United Arab Emirates. Injury prevention strategies often overlook the interaction of individual and behavioural risk factors in assessing the severity of RTI outcomes. We conducted a systematic investigation of the underlying interactive effects of age and gender on the severity of fatal and non-fatal RTI outcomes in the Sultanate of Oman. Methods We used the Royal Oman Police national database of road traffic crashes for the period 2010–2014. Our study was based on 35 785 registered incidents: of these, 10.2% fatal injuries, 6.2% serious, 27.3% moderate, 37.3% mild injuries and 19% only vehicle damage but no human injuries. We applied a generalised ordered logit regression to estimate the effect of age and gender on RTI severity, controlling for risk behaviours, personal characteristics, vehicle, road, traffic, environment conditions and geographical location. Results The most dominant group at risk of all types of RTIs was young male drivers. The probability of severe incapacitating injuries was the highest for drivers aged 25–29 (26.6%) years, whereas the probability of fatal injuries was the highest for those aged 20–24 (26.9%) years. Analysis of three-way interactions of age, gender and causes of crash show that overspeeding was the primary cause of different types of RTIs. In particular, the probability of fatal injuries among male drivers attributed to overspeeding ranged from 3%–6% for those aged 35 years and above to 13.4% and 17.7% for those aged 25–29 years and 20–24 years, respectively. Conclusions The high burden of severe and fatal RTIs in Oman was primarily attributed to overspeed driving behaviour of young male drivers in the 20–29 years age range. Our findings highlight the critical need for designing early gender-sensitive road safety interventions targeting young male and female drivers. PMID:29018585

Seasonality of the urban heat island effect: patterns and drivers

NASA Astrophysics Data System (ADS)

Schatz, J.; Kucharik, C. J.

2014-12-01

We conducted a rigorous analysis of the drivers of seasonality in the urban heat island (UHI) effect. Many studies report annual cycles in UHI intensity and have attributed those patterns to various hypotheses, including seasonal trends in wind and clouds, prevalence of anti-cyclonic conditions, soil moisture, and day length. But to our knowledge, those hypotheses have never been tested, leaving a substantial gap in our basic understanding of the urban climate. We tested these and other hypotheses using two years of continuous temperature measurements from an array of 150 sensors in and around Madison, Wisconsin USA, an urban area of 407,000 surrounded by lakes and a rural landscape of agriculture, forests, wetlands, and grasslands. This is one of the best replicated urban climate arrays ever deployed, which allowed us to characterize the UHI in rich spatial and temporal detail and rigorously assess the biophysical and synoptic drivers of its seasonal variation. UHI intensities were typically highest in summer and lowest in winter. Seasonal trends in wind speed and cloud cover generally tracked annual trends in UHI intensity, with the clearer, calmer conditions conducive to stronger UHIs more common in summer. This is consistent with the hypothesis that seasonal trends in wind, clouds, and anti-cyclonic conditions drive UHI seasonality. However, clear, calm summer nights still had higher UHI intensities than clear, calm winter nights, indicating that some background factor shifted baseline UHI intensities throughout the year. We found that regional vegetation and snow cover conditions set distinct seasonal baselines for UHI intensity, with nighttime intensities averaging 4°C in summer and 1°C in winter. Synoptic and biophysical factors that vary on shorter time scales (e.g. wind, clouds, soil moisture, relative humidity) modified daily UHI intensity around those baselines by 1-3°C but were not the primary drivers of UHI seasonality, contrary to the most common hypotheses in the literature. In addition to clarifying the drivers of UHI seasonality, our results have implications for the design and interpretation of UHI studies, particularly in how the timing of data collection might affect results and conclusions.

Naturalistic distraction and driving safety in older drivers.

PubMed

Aksan, Nazan; Dawson, Jeffrey D; Emerson, Jamie L; Yu, Lixi; Uc, Ergun Y; Anderson, Steven W; Rizzo, Matthew

2013-08-01

In this study, we aimed to quantify and compare performance of middle-aged and older drivers during a naturalistic distraction paradigm (visual search for roadside targets) and to predict older drivers performance given functioning in visual, motor, and cognitive domains. Distracted driving can imperil healthy adults and may disproportionally affect the safety of older drivers with visual, motor, and cognitive decline. A total of 203 drivers, 120 healthy older (61 men and 59 women, ages 65 years and older) and 83 middle-aged drivers (38 men and 45 women, ages 40 to 64 years), participated in an on-road test in an instrumented vehicle. Outcome measures included performance in roadside target identification (traffic signs and restaurants) and concurrent driver safety. Differences in visual, motor, and cognitive functioning served as predictors. Older drivers identified fewer landmarks and drove slower but committed more safety errors than did middle-aged drivers. Greater familiarity with local roads benefited performance of middle-aged but not older drivers.Visual cognition predicted both traffic sign identification and safety errors, and executive function predicted traffic sign identification over and above vision. Older adults are susceptible to driving safety errors while distracted by common secondary visual search tasks that are inherent to driving. The findings underscore that age-related cognitive decline affects older drivers' management of driving tasks at multiple levels and can help inform the design of on-road tests and interventions for older drivers.

CMOS output buffer wave shaper

NASA Technical Reports Server (NTRS)

Albertson, L.; Whitaker, S.; Merrell, R.

1990-01-01

As the switching speeds and densities of Digital CMOS integrated circuits continue to increase, output switching noise becomes more of a problem. A design technique which aids in the reduction of switching noise is reported. The output driver stage is analyzed through the use of an equivalent RLC circuit. The results of the analysis are used in the design of an output driver stage. A test circuit based on these techniques is being submitted to MOSIS for fabrication.

Laser targets compensate for limitations in inertial confinement fusion drivers

NASA Astrophysics Data System (ADS)

Kilkenny, J. D.; Alexander, N. B.; Nikroo, A.; Steinman, D. A.; Nobile, A.; Bernat, T.; Cook, R.; Letts, S.; Takagi, M.; Harding, D.

2005-10-01

Success in inertial confinement fusion (ICF) requires sophisticated, characterized targets. The increasing fidelity of three-dimensional (3D), radiation hydrodynamic computer codes has made it possible to design targets for ICF which can compensate for limitations in the existing single shot laser and Z pinch ICF drivers. Developments in ICF target fabrication technology allow more esoteric target designs to be fabricated. At present, requirements require new deterministic nano-material fabrication on micro scale.

Quantifying driver's field-of-view in tractors: methodology and case study.

PubMed

Gilad, Issachar; Byran, Eyal

2015-01-01

When driving a car, the visual awareness is important for operating and controlling the vehicle. When operating a tractor, it is even more complex. This is because the driving is always accompanied with another task (e.g., plough) that demands constant changes of body postures, to achieve the needed Field-of-View (FoV). Therefore, the cockpit must be well designed to provide best FoV. Today, the driver's FoV is analyzed mostly by computer simulations of a cockpit model and a Digital Human Model (DHM) positioned inside. The outcome is an 'Eye view' that displays what the DHM 'sees'. This paper suggests a new approach that adds quantitative information to the current display; presented on three tractor models as case studies. Based on the results, the design can be modified. This may assist the engineer, to analyze, compare and improve the design, for better addressing the driver needs.

The characteristics and use patterns of all-terrain vehicle drivers in the United States.

PubMed

Rodgers, G B

1999-07-01

The consent decrees between the US Consumer Product Safety Commission and the major distributors of all-terrain vehicles (ATV), which were designed to address ATV-related injuries and deaths, expired in April, 1998. While national estimates of nonfatal and fatal injuries involving ATVs declined after the consent decrees went into effect 10 years ago, the injury estimates have stabilized in recent years. To gain a better understanding of current ATV use patterns, the CPSC sponsored a national probability survey of ATV drivers in the fall of 1997. The survey was designed to collect information about the characteristics and use patterns of ATV drivers and to quantify the numbers and types of ATVs in use. It employed a single stage list-assisted random-digit-dial sample design. This article describes the results of the survey, and discusses long term ATV usage trends.

Trophic amplification of climate warming

PubMed Central

Kirby, Richard R.; Beaugrand, Gregory

2009-01-01

Ecosystems can alternate suddenly between contrasting persistent states due to internal processes or external drivers. It is important to understand the mechanisms by which these shifts occur, especially in exploited ecosystems. There have been several abrupt marine ecosystem shifts attributed either to fishing, recent climate change or a combination of these two drivers. We show that temperature has been an important driver of the trophodynamics of the North Sea, a heavily fished marine ecosystem, for nearly 50 years and that a recent pronounced change in temperature established a new ecosystem dynamic regime through a series of internal mechanisms. Using an end-to-end ecosystem approach that included primary producers, primary, secondary and tertiary consumers, and detritivores, we found that temperature modified the relationships among species through nonlinearities in the ecosystem involving ecological thresholds and trophic amplifications. Trophic amplification provides an alternative mechanism to positive feedback to drive an ecosystem towards a new dynamic regime, which in this case favours jellyfish in the plankton and decapods and detritivores in the benthos. Although overfishing is often held responsible for marine ecosystem degeneration, temperature can clearly bring about similar effects. Our results are relevant to ecosystem-based fisheries management (EBFM), seen as the way forward to manage exploited marine ecosystems. PMID:19740882

Identification of novel mutational drivers reveals oncogene dependencies in multiple myeloma.

PubMed

Walker, Brian A; Mavrommatis, Konstantinos; Wardell, Christopher P; Ashby, T Cody; Bauer, Michael; Davies, Faith E; Rosenthal, Adam; Wang, Hongwei; Qu, Pingping; Hoering, Antje; Samur, Mehmet; Towfic, Fadi; Ortiz, Maria; Flynt, Erin; Yu, Zhinuan; Yang, Zhihong; Rozelle, Dan; Obenauer, John; Trotter, Matthew; Auclair, Daniel; Keats, Jonathan; Bolli, Niccolo; Fulciniti, Mariateresa; Szalat, Raphael; Moreau, Philippe; Durie, Brian; Stewart, A Keith; Goldschmidt, Hartmut; Raab, Marc S; Einsele, Hermann; Sonneveld, Pieter; San Miguel, Jesus; Lonial, Sagar; Jackson, Graham H; Anderson, Kenneth C; Avet-Loiseau, Herve; Munshi, Nikhil; Thakurta, Anjan; Morgan, Gareth J

2018-06-08

Understanding the profile of oncogene and tumor suppressor gene mutations with their interactions and impact on the prognosis of multiple myeloma (MM) can improve the definition of disease subsets and identify pathways important in disease pathobiology. Using integrated genomics of 1,273 newly diagnosed patients with multiple myeloma we identify 63 driver genes, some of which are novel including IDH1 , IDH2 , HUWE1 , KLHL6 , and PTPN11 Oncogene mutations are significantly more clonal than tumor suppressor mutations, indicating they may exert a bigger selective pressure. Patients with more mutations in driver genes are associated with a worse outcome, as are those with identified mechanisms of genomic instability. Oncogenic dependencies were identified between mutations in driver genes, common regions of copy number change, and primary translocation and hyperdiploidy events. These dependencies included associations with t(4;14) and mutations in FGFR3 , DIS3 and PRKD2 ; t(11;14) with mutations in CCND1 and IRF4 ; t(14;16) with mutations in MAF , BRAF , DIS3 and ATM ; and hyperdiploidy with gain 11q, mutations in FAM46C and MYC rearrangements. These associations indicate that the genomic landscape of myeloma is pre-determined by the primary events upon which further dependencies are built, giving rise to a non-random accumulation of genetic hits. Understanding these dependencies may elucidate potential evolutionary patterns and lead to better treatment regimens. Copyright © 2018 American Society of Hematology.

Driving safety among patients with automatic implantable cardioverter defibrillators.

PubMed

Finch, N J; Leman, R B; Kratz, J M; Gillette, P C

1993-10-06

To determine the driving behavior of patients following the placement of automatic implantable cardioverter defibrillators (AICDs). Forty patients with AICDs (33 men, seven women; mean age, 62.7 years) responded to a questionnaire designed to ascertain driving behavior after hospital discharge. Despite medical advice never to drive again, 28 patients (70%) resumed driving, with the majority doing so by 8 months after AICD implantation. Of these, 11 (40%) identified themselves as the primary driver in their household. Fourteen (50%) drove daily. Two (7%) were driving and continued to drive during discharge of their AICDs. Twenty-five (91%) reported that they felt comfortable and safe while driving. A majority of patients with AICDs continue to drive after a proscription of this activity by health care workers.

Competition for land

PubMed Central

Smith, Pete; Gregory, Peter J.; van Vuuren, Detlef; Obersteiner, Michael; Havlík, Petr; Rounsevell, Mark; Woods, Jeremy; Stehfest, Elke; Bellarby, Jessica

2010-01-01

A key challenge for humanity is how a future global population of 9 billion can all be fed healthily and sustainably. Here, we review how competition for land is influenced by other drivers and pressures, examine land-use change over the past 20 years and consider future changes over the next 40 years. Competition for land, in itself, is not a driver affecting food and farming in the future, but is an emergent property of other drivers and pressures. Modelling studies suggest that future policy decisions in the agriculture, forestry, energy and conservation sectors could have profound effects, with different demands for land to supply multiple ecosystem services usually intensifying competition for land in the future. In addition to policies addressing agriculture and food production, further policies addressing the primary drivers of competition for land (population growth, dietary preference, protected areas, forest policy) could have significant impacts in reducing competition for land. Technologies for increasing per-area productivity of agricultural land will also be necessary. Key uncertainties in our projections of competition for land in the future relate predominantly to uncertainties in the drivers and pressures within the scenarios, in the models and data used in the projections and in the policy interventions assumed to affect the drivers and pressures in the future. PMID:20713395

Drivers of variation in aboveground net primary productivity and plant community composition differe across a broad precipitation gradient

USDA-ARS?s Scientific Manuscript database

It has long been a goal of ecology to determine what factors drive variation in aboveground net primary production (ANPP). Total annual precipitation has been shown to be a strong predictor of ANPP across broad spatial scales, but a poor predictor at local scales. Here we aim to determine the amount...

Roadmap to MaRIE January 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barnes, Cris William

After the decision to end nuclear testing and the inception of the Stockpile Stewardship program, the condition of the stockpile was the primary mission driver. During the first two decades of stewardship, the primary program goal could be described as underwriting the Stockpile-to-Target Sequence (STS), the military requirements on the conditions the nuclear warheads needed to survive and still operate.

Reusable Launch Vehicle Tank/Intertank Sizing Trade Study

NASA Technical Reports Server (NTRS)

Dorsey, John T.; Myers, David E.; Martin, Carl J.

2000-01-01

A tank and intertank sizing tool that includes effects of major design drivers, and which allows parametric studies to be performed, has been developed and calibrated against independent representative results. Although additional design features, such as bulkheads and field joints, are not currently included in the process, the improved level of fidelity has allowed parametric studies to be performed which have resulted in understanding of key tank and intertank design drivers, design sensitivities, and definition of preferred design spaces. The sizing results demonstrated that there were many interactions between the configuration parameters of internal/external payload, vehicle fineness ratio (half body angle), fuel arrangement (LOX-forward/LOX-aft), number of tanks, and tank shape/arrangement (number of lobes).

Effect of changing driving conditions on driver behavior towards design of a safe and efficient traffic system.

DOT National Transportation Integrated Search

2013-12-01

This simulation-based study explores the effects of different work zone configurations, varying distances : between traffic signs, traffic density and individual differences on drivers behavior. Conventional Lane : Merge (CLM) and Joint Lane Merge...

Final report : model deployment of a regional, multi-modal 511 traveler information system

DOT National Transportation Integrated Search

1999-02-01

A survey was designed and conducted, to extend prior work discussed in the Driver Fatigue and Alertness Study literature review, by collecting additional data about commercial motor vehicle (CMV) drivers and their job characteristics. It also sought ...

A peer-to-peer traffic safety campaign program.

DOT National Transportation Integrated Search

2014-06-01

The purpose of this project was to implement a peer-to-peer drivers safety program designed for high school students. : This project builds upon an effective peer-to-peer outreach effort in Texas entitled Teens in the Driver Seat (TDS), the : nati...

Seat Belts: Are They the Best Solution to the Real Problem?

ERIC Educational Resources Information Center

Comeau, Lee F.

1985-01-01

More children are killed outside their school buses than inside. To solve this problem, we should improve bus design, provide driver training programs for all school bus drivers, utilize the latest safety devices available, and improve ridership safety curriculum. (MLF)

Evaluation of an updated version of the risk awareness and perception training program for young drivers.

DOT National Transportation Integrated Search

2017-03-01

Previous research suggests newly licensed teen drivers often fail to anticipate where unexpected hazards might materialize. One : training program designed to address these apparent deficiencies in knowledge and skills that has shown promise in previ...

Can we estimate plasma density in ICP driver through electrical parameters in RF circuit?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bandyopadhyay, M., E-mail: mainak@iter-india.org; Sudhir, Dass, E-mail: dass.sudhir@iter-india.org; Chakraborty, A., E-mail: arunkc@iter-india.org

2015-04-08

To avoid regular maintenance, invasive plasma diagnostics with probes are not included in the inductively coupled plasma (ICP) based ITER Neutral Beam (NB) source design. Even non-invasive probes like optical emission spectroscopic diagnostics are also not included in the present ITER NB design due to overall system design and interface issues. As a result, negative ion beam current through the extraction system in the ITER NB negative ion source is the only measurement which indicates plasma condition inside the ion source. However, beam current not only depends on the plasma condition near the extraction region but also on the perveancemore » condition of the ion extractor system and negative ion stripping. Nevertheless, inductively coupled plasma production region (RF driver region) is placed at distance (∼ 30cm) from the extraction region. Due to that, some uncertainties are expected to be involved if one tries to link beam current with plasma properties inside the RF driver. Plasma characterization in source RF driver region is utmost necessary to maintain the optimum condition for source operation. In this paper, a method of plasma density estimation is described, based on density dependent plasma load calculation.« less

Valuable snapshots of deep time

NASA Astrophysics Data System (ADS)

Hammarlund, Emma U.

2018-05-01

A regional oxygenation event 1.6 billion years ago coincided with the appearance of large fossils, but whether the availability of oxygen was the primary driver of the diversification of multicellular organisms remains to be seen.

29 CFR 782.4 - Drivers' helpers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... definition has classified all such employees, including armed guards on armored trucks and conductorettes on..., although the primary duty of armed guards on armored trucks is to protect the valuables in the case of...

29 CFR 782.4 - Drivers' helpers.

Code of Federal Regulations, 2012 CFR

2012-07-01

... definition has classified all such employees, including armed guards on armored trucks and conductorettes on..., although the primary duty of armed guards on armored trucks is to protect the valuables in the case of...

29 CFR 782.4 - Drivers' helpers.

Code of Federal Regulations, 2014 CFR

2014-07-01

... definition has classified all such employees, including armed guards on armored trucks and conductorettes on..., although the primary duty of armed guards on armored trucks is to protect the valuables in the case of...

Transportation fuels and vehicles.

DOT National Transportation Integrated Search

1999-06-24

Environmental concerns are currently the primary driver of innovation in the area of Transportation Fuels and Vehicles. Road vehicle emissions are a significant determinant of urban air quality and produce a very substantial quantity of carbon dioxid...

Dead-blow hammer design applied to a calibration target mechanism to dampen excessive rebound

NASA Technical Reports Server (NTRS)

Lim, Brian Y.

1991-01-01

An existing rotary electromagnetic driver was specified to be used to deploy and restow a blackbody calibration target inside of a spacecraft infrared science instrument. However, this target was much more massive than any other previously inherited design applications. The target experienced unacceptable bounce when reaching its stops. Without any design modification, the momentum generated by the driver caused the target to bounce back to its starting position. Initially, elastomeric dampers were used between the driver and the target. However, this design could not prevent the bounce, and it compromised the positional accuracy of the calibration target. A design that successfully met all the requirements incorporated a sealed pocket 85 percent full of 0.75 mm diameter stainless steel balls in the back of the target to provide the effect of a dead-blow hammer. The energy dissipation resulting from the collision of balls in the pocket successfully dampened the excess momentum generated during the target deployment. The disastrous effects of new requirements on a design with a successful flight history, the modifications that were necessary to make the device work, and the tests performed to verify its functionality are described.

Driver Support Functions under Resource-Limited Situations

NASA Astrophysics Data System (ADS)

Inagaki, Toshiyuki; Itoh, Makoto; Nagai, Yoshitomo

This paper reports results of an experiment with a driving simulator in order to answer the following question: What type of support should be given to an automobile driver when it is determined, via some monitoring method, that the driver's situation awareness may not be appropriate to a given traffic condition? This paper compares (a) warning type support in which an auditory warning is given to the driver to enhance situation awareness and (b) action type support in which an autonomous safety control is executed as a soft protection for avoiding an accident. Although the both types of driver support are effective, the former sometimes fail to assure safety, which suggests a limitation of the human locus of control assumption, while efficacy of the latter may be degraded by an incorrect human reasoning that can happen under uncertainty. This paper discusses viewpoints needed in the design of systems for supporting drivers in resource-limited situations in which information or time available for a driver is limited in a given traffic condition.

The behavioral economics of drunk driving.

PubMed

Sloan, Frank A; Eldred, Lindsey M; Xu, Yanzhi

2014-05-01

This study investigates whether drinker-drivers attributes are associated with imperfect rationality or irrationality. Using data from eight U.S. cities, we determine whether drinker-drivers differ from other drinkers in cognitive ability, ignorance of driving while intoxicated (DWI) laws, have higher rates of time preference, are time inconsistent, and lack self-control on other measures. We find that drinker-drivers are relatively knowledgeable about DWI laws and do not differ on two of three study measures of cognitive ability from other drinkers. Drinker-drivers are less prone to plan events involving drinking, e.g., selecting a designated driver in advance of drinking, and are more impulsive. Furthermore, we find evidence in support of hyperbolic discounting. In particular, relative to non-drinker-drivers, the difference between short- and long-term discount rates is much higher for drinker-drivers than for other drinkers. Implications of our findings for public policy, including incapacitation, treatment, and educational interventions, are discussed. Copyright © 2014 Elsevier B.V. All rights reserved.

Graduated Driver Licensing

PubMed Central

Bates, Lyndel J.; Allen, Siobhan; Armstrong, Kerry; Watson, Barry; King, Mark J.; Davey, Jeremy

2014-01-01

Graduated driver licensing (GDL) aims to gradually increase the exposure of new drivers to more complex driving situations and typically consists of learner, provisional and open licence phases. The first phase, the learner licence, is designed to allow novice drivers to obtain practical driving experience in lower risk situations. The learner licence can delay licensure, encourage novice drivers to learn under supervision, mandate the number of hours of practice required to progress to the next phase and encourage parental involvement. The second phase, the provisional licence, establishes various driving restrictions and thereby reduces exposure to situations of higher risk, such as driving at night, with passengers or after drinking alcohol. Parental involvement with a GDL system appears essential in helping novices obtain sufficient practice and in enforcing compliance with restrictions once the new driver obtains a provisional licence. Given the significant number of young drivers involved in crashes within Oman, GDL is one countermeasure that may be beneficial in reducing crash risk and involvement for this group. PMID:25364543

Attitudes of Greek Drivers with Focus on Mobile Phone Use While Driving.

PubMed

Yannis, George; Theofilatos, Athanasios; Marinou, Paraskevi

2015-01-01

This article investigates the attitudes and behavior of Greek drivers with specific focus on mobile phone use while driving. The research is based on the data of the pan-European SARTRE 4 survey, which was conducted on a representative sample of Greek drivers in 2011. Analysis of the drivers' behavior was carried out by the statistical methods of factor and cluster analysis. According to the results of factor analysis, Greek drivers' responses in the selected questions were summarized into 4 factors, describing road behavior and accident involvement probability as well as their views on issues concerning other drivers' road behaviors, fatigued driving, enforcement of road safety, and mobile phone use while driving. The results of cluster analysis indicated 5 different groups of Greek drivers--the moderate, the optimistic, the conservative, the risky, and the reasonably cautious--and the characteristics of each group where identified. These results may be useful for the appropriate design of targeted road safety campaigns and other countermeasures.

Health risk equations and risk assessment of airborne benzene homologues exposure to drivers and passengers in taxi cabins.

PubMed

Chen, Xiaokai; Feng, Lili; Luo, Huilong; Cheng, Heming

2016-03-01

Interior air environment and health problems of vehicles have attracted increasing attention, and benzene homologues (BHs) including benzene, toluene, ethylbenzene, xylenes, and styrene are primary hazardous gases in vehicular cabins. The BHs impact on the health of passengers and drivers in 38 taxis is assessed, and health risk equations of in-car BHs to different drivers and passengers are induced. The health risk of in-car BHs for male drivers is the highest among all different receptors and is 1.04, 6.67, and 6.94 times more than ones for female drivers, male passengers, and female passengers, respectively. In-car BHs could not lead to the non-cancer health risk to all passengers and drivers as for the maximal value of non-cancer indices is 0.41 and is less than the unacceptable value (1.00) of non-cancer health risk from USEPA. However, in-car BHs lead to cancer health risk to drivers as for the average value of cancer indices is 1.21E-04 which is 1.21 times more than the unacceptable value (1.00E-04) of cancer health risk from USEPA. Finally, for in-car airborne benzene concentration (X, μg/m(3)) to male drivers, female drivers, male passengers, and female passengers, the cancer health risk equations are Y = 1.48E-06X, Y = 1.42E-06X, Y = 2.22E-07X, and Y = 2.13E-07X, respectively, and the non-cancer health risk equations are Y = 1.70E-03X, Y = 1.63E-03X, Y = 2.55E-04X, and Y = 2.45E-04X, respectively.

A New Conception of Bucket Wheel Excavator Cab and Seat Mounting

NASA Astrophysics Data System (ADS)

Blekta, J.; Mevald, J.; Petríková, I.; Petříček, J.; Lufinka, A.

One of the most important problem of coal mining by bucket wheel excavators is how to minimize influence of vibrations on driver's body. Project of Ministry of Trade and Industry of the Czech Republic solved in Technical University of Liberec was engaged in this problem. The aim of this project was to design a new cab and seat mounting of wheel excavator Schrs 1320. A suitable possibilities of cab suspensions were investigated to minimize driver body vibrations and to improve influence of mining process to drivers health. After optimization one concept was chosen. A new methodic of measured data evaluation was created for using in excavators as well as in laboratory. The new concept of dynamic seat absorber were designed also.

250 kA compact linear transformer driver for wire array z-pinch loads

NASA Astrophysics Data System (ADS)

Bott, S. C.; Haas, D. M.; Madden, R. E.; Ueda, U.; Eshaq, Y.; Collins, G., IV; Gunasekera, K.; Mariscal, D.; Peebles, J.; Beg, F. N.; Mazarakis, M.; Struve, K.; Sharpe, R.

2011-05-01

We present the application of a short rise (˜150ns) 250 kA linear transformer driver (LTD) to wire array z-pinch loads for the first time. The generator is a modification of a previous driver in which a new conical power feed provides a low inductance coupling to wire loads. Performance of the new design using both short circuit and plasma loads is presented and discussed. The final design delivers ˜200kA to a wire array load which is in good agreement with SCREAMER calculations using a simplified representative circuit. Example results demonstrate successful experiments using cylindrical, conical, and inverse wire arrays as well as previously published work on x-pinch loads.

Relationships of working conditions, health problems and vehicle accidents in bus rapid transit (BRT) drivers.

PubMed

Gómez-Ortiz, Viviola; Cendales, Boris; Useche, Sergio; Bocarejo, Juan P

2018-04-01

The aim of this study was to estimate accident risk rates and mental health of bus rapid transit (BRT) drivers based on psychosocial risk factors at work leading to increased stress and health problems. A cross-sectional research design utilized a self-report questionnaire completed by 524 BRT drivers. Some working conditions of BRT drivers (lack of social support from supervisors and perceived potential for risk) may partially explain Bogota's BRT drivers' involvement in road accidents. Drivers' mental health problems were associated with higher job strain, less support from co-workers, fewer rewards and greater signal conflict while driving. To prevent bus accidents, supervisory support may need to be increased. To prevent mental health problems, other interventions may be needed such as reducing demands, increasing job control, reducing amount of incoming information, simplifying current signals, making signals less contradictory, and revising rewards. © 2018 Wiley Periodicals, Inc.

Driver-centred vehicle automation: using network analysis for agent-based modelling of the driver in highly automated driving systems.

PubMed

Banks, Victoria A; Stanton, Neville A

2016-11-01

To the average driver, the concept of automation in driving infers that they can become completely 'hands and feet free'. This is a common misconception, however, one that has been shown through the application of Network Analysis to new Cruise Assist technologies that may feature on our roads by 2020. Through the adoption of a Systems Theoretic approach, this paper introduces the concept of driver-initiated automation which reflects the role of the driver in highly automated driving systems. Using a combination of traditional task analysis and the application of quantitative network metrics, this agent-based modelling paper shows how the role of the driver remains an integral part of the driving system implicating the need for designers to ensure they are provided with the tools necessary to remain actively in-the-loop despite giving increasing opportunities to delegate their control to the automated subsystems. Practitioner Summary: This paper describes and analyses a driver-initiated command and control system of automation using representations afforded by task and social networks to understand how drivers remain actively involved in the task. A network analysis of different driver commands suggests that such a strategy does maintain the driver in the control loop.

Evaluation of insight training of ambulance drivers in Sweden using DART, a new e-learning tool.

PubMed

Albertsson, Pontus; Sundström, Anna

2011-12-01

The aim of the study was to evaluate whether a new e-learning tool for insight training of ambulance drivers can have an effect on drivers' driving behaviors, perceived driving competence, competence to assess risks, self-reflection, and safety attitudes. A quasi-experimental study design, with participants nonrandomly assigned into a control and intervention group, was used. The intervention group participated in the insight-training course and the control group did not. Both groups completed a self- and peer assessment online questionnaire before and after the training. The main finding is that the ambulance drivers assessed themselves through the instruments after the training, with the e-learning tool Driver Access Recording Tool (DART), as safer drivers in the areas of speed adaptation, closing up, and overtaking. In the answers from the group-based evaluation, the ambulance drivers responded that they were more reflective/analytical, had increased their risk awareness, and had changed their driving behaviors. After insight training, the ambulance drivers in this study assessed themselves as safer drivers in several important areas, including speed adaptation, closing up, and overtaking. In future training of ambulance drivers there should be more focus on insight training instead of previous training focusing on maneuvering capabilities.

Drivers of land use/land cover changes in Munessa-Shashemene landscape of the south-central highlands of Ethiopia.

PubMed

Kindu, Mengistie; Schneider, Thomas; Teketay, Demel; Knoke, Thomas

2015-07-01

Understanding drivers of changes in land use/land cover (LULC) is essential for modeling future dynamics or development of management strategies to ameliorate or prevent further decline of natural resources. In this study, an attempt has been made to identify the main drivers behind the LULC changes that had occurred in the past four decades in Munessa-Shashemene landscape of the south-central highlands of Ethiopia. The datasets required for the study were generated through both primary and secondary sources. Combination of techniques, including descriptive statistics, GIS-based processing, and regression analyses were employed for data analyses. Changes triggered by the interplay of more than 12 drivers were identified related to social, economic, environmental, policy/institutional, and technological factors. Specifically, population growth, expansion of cultivated lands and settlements, livestock ranching, cutting of woody species for fuelwood, and charcoal making were the top six important drivers of LULC change as viewed by the local people and confirmed by quantitative analyses. Differences in respondents' perceptions related to environmental (i.e., location specific) and socioeconomic determinants (e.g., age and literacy) about drivers were statically significant (P = 0.001). LULC changes were also determined by distances to major drivers (e.g., the further a pixel is from the road, the less likelihood of changes) as shown by the landscape level analyses. Further studies are suggested targeting these drivers to explore the consequences and future options and formulate intervention strategies for sustainable development in the studied landscape and elsewhere with similar geographic settings.

Assessment of Driving Safety in Older Adults with Mild Cognitive Impairment.

PubMed

Anstey, Kaarin J; Eramudugolla, Ranmalee; Chopra, Sidhant; Price, Jasmine; Wood, Joanne M

2017-01-01

With population aging, drivers with mild cognitive impairment (MCI) are increasing; however, there is little evidence available regarding their safety. We aimed to evaluate risk of unsafe on-road driving performance among older adults with MCI. The study was a cross-sectional observational study, set in Canberra, Australia. Participants were non-demented, current drivers (n = 302) aged 65 to 96 years (M = 75.7, SD = 6.18, 40% female) recruited through the community and primary and tertiary care clinics. Measures included a standardized on-road driving test (ORT), a battery of screening measures designed to evaluate older driver safety (UFOV®, DriveSafe, Multi-D), a neurocognitive test battery, and questionnaires on driving history and behavior. Using Winblad criteria, 57 participants were classified as having MCI and 245 as cognitively normal (CN). While the MCI group had a significantly lower overall safety rating on the ORT (5.61 versus 6.05, p = 0.03), there was a wide range of driving safety scores in the CN and MCI groups. The MCI group performed worse than the CN group on the off-road screening tests. The best fitting model of predictors of ORT performance across the combined sample included age, the Multi-D, and DriveSafe, classifying 90.4% of the sample correctly. Adults with MCI exhibit a similar range of driving ability to CN adults, although on average they scored lower on off-road and on-road assessments. Driving specific tests were more strongly associated with safety ratings than traditional neuropsychological tests.

Assessment of Driving Safety in Older Adults with Mild Cognitive Impairment

PubMed Central

Anstey, Kaarin J.; Eramudugolla, Ranmalee; Chopra, Sidhant; Price, Jasmine; Wood, Joanne M.

2017-01-01

Background: With population aging, drivers with mild cognitive impairment (MCI) are increasing; however, there is little evidence available regarding their safety. Objective: We aimed to evaluate risk of unsafe on-road driving performance among older adults with MCI. Method: The study was a cross-sectional observational study, set in Canberra, Australia. Participants were non-demented, current drivers (n = 302) aged 65 to 96 years (M = 75.7, SD = 6.18, 40% female) recruited through the community and primary and tertiary care clinics. Measures included a standardized on-road driving test (ORT), a battery of screening measures designed to evaluate older driver safety (UFOV®, DriveSafe, Multi-D), a neurocognitive test battery, and questionnaires on driving history and behavior. Results: Using Winblad criteria, 57 participants were classified as having MCI and 245 as cognitively normal (CN). While the MCI group had a significantly lower overall safety rating on the ORT (5.61 versus 6.05, p = 0.03), there was a wide range of driving safety scores in the CN and MCI groups. The MCI group performed worse than the CN group on the off-road screening tests. The best fitting model of predictors of ORT performance across the combined sample included age, the Multi-D, and DriveSafe, classifying 90.4% of the sample correctly. Conclusion: Adults with MCI exhibit a similar range of driving ability to CN adults, although on average they scored lower on off-road and on-road assessments. Driving specific tests were more strongly associated with safety ratings than traditional neuropsychological tests. PMID:28372333

Reducing impaired-driving recidivism using advanced vehicle-based alcohol detection systems : a report to Congress

DOT National Transportation Integrated Search

2007-12-01

Vehicle-based alcohol detection systems use technologies designed to detect the presence of alcohol in a driver. Technology suitable for use in all vehicles that will detect an impaired driver faces many challenges including public acceptability, pas...

Techniques for predicting high-risk drivers for alcohol countermeasures. Volume 2, User manual

DOT National Transportation Integrated Search

1978-06-01

This user manual, a companion to the Volume I Technical Report by the same name, is designed to aid the alcohol program administrator in his decisions concerning implementation of countermeasures to selected individuals or small groups of drivers. Vo...

A simulator-based analysis of engineering treatments for right-hook bicycle crashes at signalized intersections.

PubMed

Warner, Jennifer; Hurwitz, David S; Monsere, Christopher M; Fleskes, Kayla

2017-07-01

A right-hook crash is a crash between a right-turning motor vehicle and an adjacent through-moving bicycle. At signalized intersections, these crashes can occur during any portion of the green interval when conflicting bicycles and vehicles are moving concurrently. The objective of this research was to evaluate the effectiveness of four types of engineering countermeasures - regulatory signage, intersection pavement marking, smaller curb radius, and protected intersection design - at modifying driver behaviors that are known contributing factors in these crashes. This research focused on right-hook crashes that occur during the latter stage of the circular green indication at signalized intersections with a shared right-turn and through lane. Changes in driver performance in response to treatments were measured in a high-fidelity driving simulator. Twenty-eight participants each completed 22 right-turn maneuvers. A partially counterbalanced experimental design exposed drivers to critical scenarios, which had been determined in a previous experiment. For each turn, driver performance measures, including visual attention, crash avoidance, and potential crash severity, were collected. A total of 75 incidents (47 near-collisions and 28 collisions) were observed during the 616 right turns. All treatments had some positive effect on measured driver performance with respect to the right-turn vehicle conflicts. Further work is required to map the magnitude of these changes in driver performance to crash-based outcomes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Controls on resilience and stability in a sediment-subsidized salt marsh.

PubMed

Stagg, Camille L; Mendelssohn, Irving A

2011-07-01

Although the concept of self-design is frequently employed in restoration, reestablishment of primary physical drivers does not always result in a restored ecosystem having the desired ecological functions that support system resilience and stability. We investigated the use of a primary environmental driver in coastal salt marshes, sediment availability, as a means of promoting the resilience and stability of submerging deltaic salt marshes, which are rapidly subsiding due to natural and human-induced processes. We conducted a disturbance-recovery experiment across a gradient of sediment slurry addition to assess the roles of sediment elevation and soil physico-chemical characteristics on vegetation resilience and stability in two restored salt marshes of differing age (a 15-year-old site and a 5-year-old site). Salt marshes that received moderate intensities of sediment slurry addition with elevations at the mid to high intertidal zone (2-11 cm above local mean sea level; MSL) were more resilient than natural marshes. The primary regulator of enhanced resilience and stability in the restored marshes was the alleviation of flooding stress observed in the natural, unsubsidized marsh. However, stability reached a sediment addition threshold, at an elevation of 11 cm above MSL, with decreasing stability in marshes above this elevation. Declines in resilience and stability above the sediment addition threshold were principally influenced by relatively dry conditions that resulted from insufficient and infrequent flooding at high elevations. Although the older restored marsh has subsided over time, areas receiving too much sediment still had limited stability 15 years later, emphasizing the importance of applying the appropriate amount of sediment to the marsh. In contrast, treated marshes with elevations 2-11 cm above MSL were still more resilient than the natural marsh 15 years after restoration, illustrating that when performed correctly, sediment slurry addition can be a sustainable restoration technique.

Increasing motorist compliance and caution at stop signs.

PubMed Central

Van Houten, R; Retting, R A

2001-01-01

This study evaluated strategies to improve motorist compliance and caution at three stop-sign-controlled intersections with a history of motor vehicle crashes. The primary intervention was a light-emitting diode (LED) sign that featured animated eyes scanning left and right to prompt drivers to look left and right for approaching traffic. Data were scored from videotape on the percentage of drivers coming to a complete stop and the percentage of drivers looking right before entering the intersection. Observational data were collected on the percentage of right-angle conflicts (defined as braking suddenly or swerving from the path to avoid an intersection crash). The introduction of the LED sign according to a multiple baseline across the three intersections was associated with an increase in the percentage of vehicles coming to a complete stop at all three intersections and a small increase in the percentage of drivers looking right before entering the intersections. Conflicts between vehicles on the major and minor road were also reduced following the introduction of the animated eyes prompt. PMID:11421311

Numerical assessment of fore-and-aft suspension performance to reduce whole-body vibration of wheel loader drivers

NASA Astrophysics Data System (ADS)

Fleury, Gérard; Mistrot, Pierre

2006-12-01

While driving off-road vehicles, operators are exposed to whole-body vibration acting in the fore-and-aft direction. Seat manufacturers supply products equipped with fore-and-aft suspension but only a few studies report on their performance. This work proposes a computational approach to design fore-and-aft suspensions for wheel loader seats. Field tests were conducted in a quarry to analyse the nature of vibration to which the driver was exposed. Typical input signals were recorded to be reproduced in the laboratory. Technical specifications are defined for the suspension. In order to evaluate the suspension vibration attenuation performance, a model of a sitting human body was developed and coupled to a seat model. The seat model combines the models of each suspension component. A linear two-degree-of-freedom model is used to describe the dynamic behaviour of the sitting driver. Model parameters are identified by fitting the computed apparent mass frequency response functions to the measured values. Model extensions are proposed to investigate postural effects involving variations in hands and feet positions and interaction of the driver's back with the backrest. Suspension design parameters are firstly optimized by computing the seat/man model response to sinusoidal acceleration. Four criteria including transmissibility, interaction force between the driver's back and the backrest and relative maximal displacement of the suspension are computed. A new suspension design with optimized features is proposed. Its performance is checked from calculations of the response of the seat/man model subjected to acceleration measured on the wheel loader during real work conditions. On the basis of the computed values of the SEAT factors, it is found possible to design a suspension that would increase the attenuation provided by the seat by a factor of two.

The effect of varying levels of vehicle automation on drivers' lane changing behaviour.

PubMed

Madigan, Ruth; Louw, Tyron; Merat, Natasha

2018-01-01

Much of the Human Factors research into vehicle automation has focused on driver responses to critical scenarios where a crash might occur. However, there is less knowledge about the effects of vehicle automation on drivers' behaviour during non-critical take-over situations, such as driver-initiated lane-changing or overtaking. The current driving simulator study, conducted as part of the EC-funded AdaptIVe project, addresses this issue. It uses a within-subjects design to compare drivers' lane-changing behaviour in conventional manual driving, partially automated driving (PAD) and conditionally automated driving (CAD). In PAD, drivers were required to re-take control from an automated driving system in order to overtake a slow moving vehicle, while in CAD, the driver used the indicator lever to initiate a system-performed overtaking manoeuvre. Results showed that while drivers' acceptance of both the PAD and CAD systems was high, they generally preferred CAD. A comparison of overtaking positions showed that drivers initiated overtaking manoeuvres slightly later in PAD than in manual driving or CAD. In addition, when compared to conventional driving, drivers had higher deviations in lane positioning and speed, along with higher lateral accelerations during lane changes following PAD. These results indicate that even in situations which are not time-critical, drivers' vehicle control after automation is degraded compared to conventional driving.

Exploring the relationship between alcohol and the driver characteristics in motor vehicle accidents.

PubMed

Abdel-Aty, M A; Abdelwahab, H T

2000-07-01

This study examines the differences in alcohol-related accident involvement among different driver groups in the state of Florida. The driver characteristics considered in this study are: age, gender, race, and residency of the driver of a motor vehicle involved in an accident while under the influence of alcohol, drugs, or alcohol and drugs. The main objective of this study is to test whether there are associations between the different driver characteristics and alcohol involvement in traffic accidents, and to identify the high-risk group within each driver factor. This would improve our understanding of the relationship between alcohol involvement, accidents, and the four aforementioned driver factors. It would also enable us to better design educational and awareness programs targeting specific groups in the population to reduce drinking and driving in the state. The relationship between alcohol-related accident involvement and the driver factors are investigated using general descriptive statistics, conditional probabilities and log-linear models. The results showed that the 25-34 age group experience the highest rate of alcohol/drug involvement in accidents. The rates decline with the increase in the age of the drivers. The results also indicated that there are significant relationships between the driver characteristics and alcohol/drug involvement in accidents. Male, white, and in-state drivers were also more involved in alcohol/drugs-related traffic accidents.

Influence of driver nationality on the risk of causing vehicle collisions in Spain

PubMed Central

Lardelli, C; Luna, D; Jimenez, M; Bueno, C; Garcia, M; Galvez, V

2002-01-01

Study objective: To estimate the association between driver nationality and the risk of causing a collision between vehicles in motion. Design: Retrospective, matched by collision, case-control study. Setting: Collisions that occurred in Spain during the period from 1990 to 1999 were studied. Participants: Responsible (case) and non-responsible (control) drivers identified in the databases of the Dirección General de Tráfico (General Traffic Directorate) who were involved in a collisions between two or more four wheeled vehicles in motion, in which only one of the drivers had committed a traffic violation. Main results: Crude odds ratios (ORs) for the effect of driver nationality on the risk of causing a collision were significantly higher for foreign drivers than for Spanish drivers, and ranged from a minimum of 1.19 (95% CI 1.09 to 1.29) for Portuguese drivers to a maximum of 2.06 (1.88 to 2.27) for British drivers. Corresponding adjusted ORs were slightly lower, but were still significantly higher than 1 for all nationalities except Italian, Belgian, and American (USA). Adjusted ORs were usually higher for collisions that occurred in urban areas than on open roads. Conclusions: Authorities responsible for traffic safety, and drivers in general, should consider foreign drivers in Spain at particularly high risk for causing collisions, especially in urban areas. PMID:11964439

Taking Over Control From Highly Automated Vehicles in Complex Traffic Situations: The Role of Traffic Density.

PubMed

Gold, Christian; Körber, Moritz; Lechner, David; Bengler, Klaus

2016-06-01

The aim of this study was to quantify the impact of traffic density and verbal tasks on takeover performance in highly automated driving. In highly automated vehicles, the driver has to occasionally take over vehicle control when approaching system limits. To ensure safety, the ability of the driver to regain control of the driving task under various driving situations and different driver states needs to be quantified. Seventy-two participants experienced takeover situations requiring an evasive maneuver on a three-lane highway with varying traffic density (zero, 10, and 20 vehicles per kilometer). In a between-subjects design, half of the participants were engaged in a verbal 20-Questions Task, representing speaking on the phone while driving in a highly automated vehicle. The presence of traffic in takeover situations led to longer takeover times and worse takeover quality in the form of shorter time to collision and more collisions. The 20-Questions Task did not influence takeover time but seemed to have minor effects on the takeover quality. For the design and evaluation of human-machine interaction in takeover situations of highly automated vehicles, the traffic state seems to play a major role, compared to the driver state, manipulated by the 20-Questions Task. The present results can be used by developers of highly automated systems to appropriately design human-machine interfaces and to assess the driver's time budget for regaining control. © 2016, Human Factors and Ergonomics Society.

Key Reliability Drivers of Liquid Propulsion Engines and A Reliability Model for Sensitivity Analysis

NASA Technical Reports Server (NTRS)

Huang, Zhao-Feng; Fint, Jeffry A.; Kuck, Frederick M.

2005-01-01

This paper is to address the in-flight reliability of a liquid propulsion engine system for a launch vehicle. We first establish a comprehensive list of system and sub-system reliability drivers for any liquid propulsion engine system. We then build a reliability model to parametrically analyze the impact of some reliability parameters. We present sensitivity analysis results for a selected subset of the key reliability drivers using the model. Reliability drivers identified include: number of engines for the liquid propulsion stage, single engine total reliability, engine operation duration, engine thrust size, reusability, engine de-rating or up-rating, engine-out design (including engine-out switching reliability, catastrophic fraction, preventable failure fraction, unnecessary shutdown fraction), propellant specific hazards, engine start and cutoff transient hazards, engine combustion cycles, vehicle and engine interface and interaction hazards, engine health management system, engine modification, engine ground start hold down with launch commit criteria, engine altitude start (1 in. start), Multiple altitude restart (less than 1 restart), component, subsystem and system design, manufacturing/ground operation support/pre and post flight check outs and inspection, extensiveness of the development program. We present some sensitivity analysis results for the following subset of the drivers: number of engines for the propulsion stage, single engine total reliability, engine operation duration, engine de-rating or up-rating requirements, engine-out design, catastrophic fraction, preventable failure fraction, unnecessary shutdown fraction, and engine health management system implementation (basic redlines and more advanced health management systems).

Productivity, biodiversity, and pathogens influence the global hunter-gatherer population density.

PubMed

Tallavaara, Miikka; Eronen, Jussi T; Luoto, Miska

2018-02-06

The environmental drivers of species distributions and abundances are at the core of ecological research. However, the effects of these drivers on human abundance are not well-known. Here, we report how net primary productivity, biodiversity, and pathogen stress affect human population density using global ethnographic hunter-gatherer data. Our results show that productivity has significant effects on population density globally. The most important direct drivers, however, depend on environmental conditions: biodiversity influences population density exclusively in low-productivity regions, whereas pathogen stress does so in high-productivity regions. Our results also indicate that subtropical and temperate forest biomes provide the highest carrying capacity for hunter-gatherer populations. These findings document that environmental factors play a key role in shaping global population density patterns of preagricultural humans.

The overall program effects of California's 3-Tier Assessment System pilot on crashes and mobility among senior drivers.

PubMed

Camp, Bayliss J

2013-12-01

In 2007, the California Department of Motor Vehicles (DMV) undertook a pilot study of the 3-Tier Assessment System, the purpose of which was to examine, in a large-scale real-time public agency setting, the effectiveness of this method for both reducing the crash risk of individual drivers and for extending the safe driving years of Californian drivers of all ages. The 3-Tier Assessment System consisted of tiered series of screening tools incorporated into the in-office driver's license renewal process. These screening tools identified drivers with various kinds of functional limitations (physical, visual, and cognitive/perceptual), that might impact safe driving. Paired with the screening tools were educational materials designed to improve drivers' knowledge of their own limitations, including compensating techniques. The present study is a population-based evaluation of the effects of the pilot on subsequent crash risk and mobility outcomes (including delicensure) of participating drivers age 70 and older. Pilot participants were compared with two control groups processed according to standard California DMV license renewal procedures. Because the 3-Tier Assessment System was designed to identify limitations normally associated with aging, the present analyses focus on drivers age 70 and older. However, it should be emphasized that during the 3-Tier pilot the screening tools were applied to drivers of all ages. There were two main findings. First, there were no consistent, statistically significant differences between the pilot and control groups in crash risk in the two years following screening. Second, pilot participants experienced statistically significant effects on mobility. These effects included delays in time to complete their license renewal, an increase in the number of assigned license restrictions, and an increase in the number of customers failing to renew their driving privilege. Based on these findings, suggestions for further research are made. None. © 2013.

Augmented reality cues to assist older drivers with gap estimation for left-turns.

PubMed

Rusch, Michelle L; Schall, Mark C; Lee, John D; Dawson, Jeffrey D; Rizzo, Matthew

2014-10-01

The objective of this study was to assess the effects of augmented reality (AR) cues designed to assist middle-aged and older drivers with a range of UFOV impairments, judging when to make left-turns across oncoming traffic. Previous studies have shown that AR cues can help middle-aged and older drivers respond to potential roadside hazards by increasing hazard detection without interfering with other driving tasks. Intersections pose a critical challenge for cognitively impaired drivers, prone to misjudge time-to-contact with oncoming traffic. We investigated whether AR cues improve or interfere with hazard perception in left-turns across oncoming traffic for drivers with age-related cognitive decline. Sixty-four middle-aged and older drivers with a range of UFOV impairment judged when it would be safe to turn left across oncoming traffic approaching the driver from the opposite direction in a rural stop-sign controlled intersection scenario implemented in a static base driving simulator. Outcome measures used to evaluate the effectiveness of AR cueing included: Time-to-Contact (TTC), Gap Time Variation (GTV), Response Rate, and Gap Response Variation (GRV). All drivers estimated TTCs were shorter in cued than in uncued conditions. In addition, drivers responded more often in cued conditions than in uncued conditions and GRV decreased for all drivers in scenarios that contained AR cues. For both TTC and response rate, drivers also appeared to adjust their behavior to be consistent with the cues, especially drivers with the poorest UFOV scores (matching their behavior to be close to middle-aged drivers). Driver ratings indicated that cueing was not considered to be distracting. Further, various conditions of reliability (e.g., 15% miss rate) did not appear to affect performance or driver ratings. Copyright © 2014 Elsevier Ltd. All rights reserved.

AUGMENTED REALITY CUES TO ASSIST OLDER DRIVERS WITH GAP ESTIMATION FOR LEFT-TURNS

PubMed Central

Rusch, Michelle L.; Schall, Mark C.; Lee, John D.; Dawson, Jeffrey D.; Rizzo, Matthew

2014-01-01

The objective of this study was to assess the effects of augmented reality (AR) cues designed to assist middle-aged and older drivers with a range of UFOV impairments, judging when to make left-turns across oncoming traffic. Previous studies have shown that AR cues can help middle-aged and older drivers respond to potential roadside hazards by increasing hazard detection without interfering with other driving tasks. Intersections pose a critical challenge for cognitively impaired drivers, prone to misjudge time-to-contact with oncoming traffic. We investigated whether AR cues improve or interfere with hazard perception in left-turns across oncoming traffic for drivers with age-related cognitive decline. Sixty-four middle-aged and older drivers with a range of UFOV impairment judged when it would be safe to turn left across oncoming traffic approaching the driver from the opposite direction in a rural stop-sign controlled intersection scenario implemented in a static base driving simulator. Outcome measures used to evaluate the effectiveness of AR cueing included: Time-to-Contact (TTC), Gap Time Variation (GTV), Response Rate, and Gap Response Variation (GRV). All drivers estimated TTCs were shorter in cued than in uncued conditions. In addition, drivers responded more often in cued conditions than in uncued conditions and GRV decreased for all drivers in scenarios that contained AR cues. For both TTC and response rate, drivers also appeared to adjust their behavior to be consistent with the cues, especially drivers with the poorest UFOV scores (matching their behavior to be close to middle-aged drivers). Driver ratings indicated that cueing was not considered to be distracting. Further, various conditions of reliability (e.g., 15% miss rate) did not appear to affect performance or driver ratings. PMID:24950128

Vision and Driving

PubMed Central

Owsley, Cynthia; McGwin, Gerald

2010-01-01

Driving is the primary means of personal travel in many countries and is relies heavily on vision for its successful execution. Research over the past few decades has addressed the role of vision in driver safety (motor vehicle collision involvement) and in driver performance (both on-road and using interactive simulators in the laboratory). Here we critically review what is currently known about the role of various aspects of visual function in driving. We also discuss translational research issues on vision screening for licensure and re-licensure and rehabilitation of visually impaired persons who want to drive. PMID:20580907

Stimulus driver for epilepsy seizure suppression with adaptive loading impedance

NASA Astrophysics Data System (ADS)

Ker, Ming-Dou; Lin, Chun-Yu; Chen, Wei-Ling

2011-10-01

A stimulus driver circuit for a micro-stimulator used in an implantable device is presented in this paper. For epileptic seizure control, the target of the driver was to output 30 µA stimulus currents when the electrode impedance varied between 20 and 200 kΩ. The driver, which consisted of the output stage, control block and adaptor, was integrated in a single chip. The averaged power consumption of the stimulus driver was 0.24-0.56 mW at 800 Hz stimulation rate. Fabricated in a 0.35 µm 3.3 V/24 V CMOS process and applied to a closed-loop epileptic seizure monitoring and controlling system, the proposed design has been successfully verified in the experimental results of Long-Evans rats with epileptic seizures.

Coming back into the loop: Drivers' perceptual-motor performance in critical events after automated driving.

PubMed

Louw, Tyron; Markkula, Gustav; Boer, Erwin; Madigan, Ruth; Carsten, Oliver; Merat, Natasha

2017-11-01

This driving simulator study, conducted as part of the EU AdaptIVe project, investigated drivers' performance in critical traffic events, during the resumption of control from an automated driving system. Prior to the critical events, using a between-participant design, 75 drivers were exposed to various screen manipulations that varied the amount of available visual information from the road environment and automation state, which aimed to take them progressively further 'out-of-the-loop' (OoTL). The current paper presents an analysis of the timing, type, and rate of drivers' collision avoidance response, also investigating how these were influenced by the criticality of the unfolding situation. Results showed that the amount of visual information available to drivers during automation impacted on how quickly they resumed manual control, with less information associated with slower take-over times, however, this did not influence the timing of when drivers began a collision avoidance manoeuvre. Instead, the observed behaviour is in line with recent accounts emphasising the role of scenario kinematics in the timing of driver avoidance response. When considering collision incidents in particular, avoidance manoeuvres were initiated when the situation criticality exceeded an Inverse Time To Collision value of ≈0.3s -1 . Our results suggest that take-over time and timing and quality of avoidance response appear to be largely independent, and while long take-over time did not predict collision outcome, kinematically late initiation of avoidance did. Hence, system design should focus on achieving kinematically early avoidance initiation, rather than short take-over times. Copyright © 2017 Elsevier Ltd. All rights reserved.

Fatigue and voluntary utilization of automation in simulated driving.

PubMed

Neubauer, Catherine; Matthews, Gerald; Langheim, Lisa; Saxby, Dyani

2012-10-01

A driving simulator was used to assess the impact on fatigue, stress, and workload of full vehicle automation that was initiated by the driver. Previous studies have shown that mandatory use of full automation induces a state of "passive fatigue" associated with loss of alertness. By contrast, voluntary use of automation may enhance the driver's perceptions of control and ability to manage fatigue. Participants were assigned to one of two experimental conditions, automation optional (AO) and nonautomation (NA), and then performed a 35 min, monotonous simulated drive. In the last 5 min, automation was unavailable and drivers were required to respond to an emergency event. Subjective state and workload were evaluated before and after the drive. Making automation available to the driver failed to alleviate fatigue and stress states induced by driving in monotonous conditions. Drivers who were fatigued prior to the drive were more likely to choose to use automation, but automation use increased distress, especially in fatigue-prone drivers. Drivers in the AO condition were slower to initiate steering responses to the emergency event, suggesting optional automation may be distracting. Optional, driver-controlled automation appears to pose the same dangers to task engagement and alertness as externally initiated automation. Drivers of automated vehicles may be vulnerable to fatigue that persists when normal vehicle control is restored. It is important to evaluate automated systems' impact on driver fatigue, to seek design solutions to the issue of maintaining driver engagement, and to address the vulnerabilities of fatigue-prone drivers.

Naturalistic distraction and driving safety in older drivers

PubMed Central

Aksan, Nazan; Dawson, Jeffrey D.; Emerson, Jamie L.; Yu, Lixi; Uc, Ergun Y.; Anderson, Steven W.; Rizzo, Matthew

2013-01-01

Objective This study aimed to quantify and compare performance of middle-aged and older drivers during a naturalistic distraction paradigm (visual search for roadside targets) and predict older driver performance given functioning in visual, motor, and cognitive domains. Background Distracted driving can imperil healthy adults and may disproportionally affect the safety of older drivers with visual, motor, and cognitive decline. Methods Two hundred and three drivers, 120 healthy older (61 men and 59 women, ages 65 years or greater) and 83 middle-aged drivers (38 men and 45 women, ages 40–64 years), participated in an on-road test in an instrumented vehicle. Outcome measures included performance in roadside target identification (traffic signs and restaurants) and concurrent driver safety. Differences in visual, motor, and cognitive functioning served as predictors. Results Older drivers identified fewer landmarks and drove slower but committed more safety errors than middle-aged drivers. Greater familiarity with local roads benefited performance of middle-aged but not older drivers. Visual cognition predicted both traffic sign identification and safety errors while executive function predicted traffic sign identification over and above vision. Conclusion Older adults are susceptible to driving safety errors while distracted by common secondary visual search tasks that are inherent to driving. The findings underscore that age-related cognitive decline affects older driver management of driving tasks at multiple levels, and can help inform the design of on-road tests and interventions for older drivers. PMID:23964422

Wisconsin Bicycle Driver Training Course. Instructor's Handbook.

ERIC Educational Resources Information Center

Thompson, Ronald L.

Designed for use by trained and certified instructors of a voluntary bicycle driver training course, this handbook provides materials for eight one-hour sessions for beginners or experienced bicyclists. Part 1, Instructor's Guidelines, discusses course objectives, organization, and content; instruction methods; and audiovisual materials. Part 2…

DIRECT operational field test evaluation : natural use study : part 2 : driver satisfaction in DIRECT controlling for reliability

DOT National Transportation Integrated Search

1998-08-01

This report describes the DIRECT field test which was designed to evaluate the user benefits, institutional issues, and technical issues of en-route driver advisory and traveler information services. Focus was on testing and evaluating the voice-base...

Driver Education Curriculum Guide.

ERIC Educational Resources Information Center

Brum, Herbert D.; And Others

Intended for driver education instructors in Ohio, the guide is designed to acquaint teachers with special characteristics, capacities, and needs of the handicapped student population and to provide resources, information, and ideas for meeting those special needs. An introductory section discusses the purpose and use of the curriculum. Section 2…

An analysis of crash likelihood : age versus driving experience

DOT National Transportation Integrated Search

1995-05-01

The study was designed to determine the crash likelihood of drivers in Michigan as a function of two independent variables: driver age and driving experience. The age variable had eight levels (18, 19, 20, 21, 22, 23, 24, and 25 years old) and the ex...

45 CFR 1310.3 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... Allowable Alternate Vehicle means a vehicle designed for carrying eleven or more people, including the driver, that meets all the Federal Motor Vehicle Safety Standards applicable to school buses, except 49... driver in ensuring the safety of the children while they ride, board, or exit the vehicle and for...

45 CFR 1310.3 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

.... Allowable Alternate Vehicle means a vehicle designed for carrying eleven or more people, including the driver, that meets all the Federal Motor Vehicle Safety Standards applicable to school buses, except 49... driver in ensuring the safety of the children while they ride, board, or exit the vehicle and for...

45 CFR 1310.3 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... Allowable Alternate Vehicle means a vehicle designed for carrying eleven or more people, including the driver, that meets all the Federal Motor Vehicle Safety Standards applicable to school buses, except 49... driver in ensuring the safety of the children while they ride, board, or exit the vehicle and for...

Changes in abiotic influences on seed plants and ferns during 18 years of primary succession on Puerto Rican landslides

Treesearch

Lawrence R. Walker; Aaron B. Shiels; Peter J. Bellingham; Ashley D. Sparrow; Ned Fetcher; Fred H. Landau; Deborah J. Lodge

2013-01-01

Abiotic variables are critical drivers of succession in most primary seres, but how their influence on biota changes over time is rarely examined. Landslides provide good model systems for examining abiotic influences because they are spatially and temporally heterogeneous habitats with distinct abiotic and biotic gradients and post-landslide erosion. In an 18-year...

Pedestrian Safety in Road Traffic in Poland

NASA Astrophysics Data System (ADS)

Budzynski, Marcin; Jamroz, Kazimierz; Mackun, Tomasz

2017-10-01

Every third road accident in Poland involves a pedestrian as a participant or, most of the time, a casualty. Pedestrian accidents are usually the result of complex situations and the outcome of a number of factors related to driver and pedestrian behaviour and road infrastructure. Safety depends largely on how well the traffic condition is perceived and on visibility in traffic. The paper presents the results of analyses of methodologies for systematic studies of pedestrian behaviour and pedestrian-driver relations. The effects of the location of the site, type of cross-section and other selected parameters on pedestrian and driver behaviour are demonstrated. The analyses showed that pedestrians are most often put at risk by too long pedestrian crossings, vehicles going too fast around pedestrian crossings, lack of proper sight distance and poorly lit or unlit pedestrian crossings. The reason for such defective infrastructure is that planners, designers, contractors and maintenance services are not receiving any support from design, marking and maintenance regulations for pedestrian traffic. In addition, the Road Traffic Law is not restrictive enough when it comes to drivers’ obligations towards pedestrian safety. Polish design regulations allow long pedestrian crossings up to four lanes in one direction or three lanes in two directions irrespective of traffic control and speed limits. Pedestrian crossings should be kept at a maximum of three lanes. There is nothing in the design regulations about the required driver-pedestrian sight distance. Neither does the Road Traffic Law help engineers with that. It is legal to park vehicles within 10 m of a pedestrian crossing which does not guarantee the necessary sight distance. Drivers must be able to see a pedestrian waiting or stepping onto the crossing from a distance that will help them come to a stop safely. It is safer to follow the principle of providing adequate pedestrian sight distance. Recommendations for pedestrian crossing design are also provided.

Let's party tonight: drinking patterns and breath alcohol values at high school parties.

PubMed

Schwartz, R H; Little, D L

1997-05-01

This study sought to determine whether the number of alcohol-containing beverages consumed by adolescents attending a "typical" high school weekend party was planned or spontaneous. A second objective was to understand the role of the designated driver and whether he or she honored a pledge of sobriety. A printed, anonymous survey with signed informed consent was distributed to 52 high school students from three different suburban high schools during three weekend high school parties. In addition, subjects underwent breath alcohol testing using the Intoximeter breath alcohol instrument. Salivary alcohol measurements were also obtained using Alco-Screen. Levels were measured in volunteers on entry and exit from the party. Fifty-two students volunteered to participate in the survey. Eleven participants volunteered to be designated drivers, nine of whom did not drink alcohol at this party. By the end of each party, the 26 boys had consumed a mean of 10 drinks, and the 16 girls had consumed 4.1 drinks, almost exactly what they had predicted at the time of arrival. By departure time, 22 (54%) of the drinkers had a breath alcohol value of .10 g/dL or greater, while only three (7%), had alcohol values of .02 g/dL or less. Blackouts were common and had been experienced by 73% of all the students surveyed. Twenty-seven percent of those surveyed had been involved in some form of physical violence while drinking. Eleven percent of the female participants reported being sexually assaulted while they or their attacker were drunk. Most of the 42 drinkers believed that it was acceptable for designated drivers to drink at least two beers. Two intoxicated designated drivers were driven home by sober friends. High school students in this study knew before attending a party the quantity of beer they would consume. Survey participants believed that it is acceptable practice for designated drivers to drink alcohol at parties; 13% of those who intended to drive after these parties were intoxicated.

Persistent frequent attenders in primary care: costs, reasons for attendance, organisation of care and potential for cognitive behavioural therapeutic intervention

PubMed Central

2012-01-01

Background The top 3% of frequent attendance in primary care is associated with 15% of all appointments in primary care, a fivefold increase in hospital expenditure, and more mental disorder and functional somatic symptoms compared to normal attendance. Although often temporary if these rates of attendance last more than two years, they may become persistent (persistent frequent or regular attendance). However, there is no long-term study of the economic impact or clinical characteristics of regular attendance in primary care. Cognitive behaviour formulation and treatment (CBT) for regular attendance as a motivated behaviour may offer an understanding of the development, maintenance and treatment of regular attendance in the context of their health problems, cognitive processes and social context. Methods/design A case control design will compare the clinical characteristics, patterns of health care use and economic costs over the last 10 years of 100 regular attenders (≥30 appointments with general practitioner [GP] over 2 years) with 100 normal attenders (6–22 appointments with GP over 2 years), from purposefully selected primary care practices with differing organisation of care and patient demographics. Qualitative interviews with regular attending patients and practice staff will explore patient barriers, drivers and experiences of consultation, and organisation of care by practices with its challenges. Cognitive behaviour formulation analysed thematically will explore the development, maintenance and therapeutic opportunities for management in regular attenders. The feasibility, acceptability and utility of CBT for regular attendance will be examined. Discussion The health care costs, clinical needs, patient motivation for consultation and organisation of care for persistent frequent or regular attendance in primary care will be explored to develop training and policies for service providers. CBT for regular attendance will be piloted with a view to developing this approach as part of a multifaceted intervention. PMID:22607525

Towards a Multi-Variable Parametric Cost Model for Ground and Space Telescopes

NASA Technical Reports Server (NTRS)

Stahl, H. Philip; Henrichs, Todd

2016-01-01

Parametric cost models can be used by designers and project managers to perform relative cost comparisons between major architectural cost drivers and allow high-level design trades; enable cost-benefit analysis for technology development investment; and, provide a basis for estimating total project cost between related concepts. This paper hypothesizes a single model, based on published models and engineering intuition, for both ground and space telescopes: OTA Cost approximately (X) D(exp (1.75 +/- 0.05)) lambda(exp(-0.5 +/- 0.25) T(exp -0.25) e (exp (-0.04)Y). Specific findings include: space telescopes cost 50X to 100X more ground telescopes; diameter is the most important CER; cost is reduced by approximately 50% every 20 years (presumably because of technology advance and process improvements); and, for space telescopes, cost associated with wavelength performance is balanced by cost associated with operating temperature. Finally, duplication only reduces cost for the manufacture of identical systems (i.e. multiple aperture sparse arrays or interferometers). And, while duplication does reduce the cost of manufacturing the mirrors of segmented primary mirror, this cost savings does not appear to manifest itself in the final primary mirror assembly (presumably because the structure for a segmented mirror is more complicated than for a monolithic mirror).

Multivariable parametric cost model for space and ground telescopes

NASA Astrophysics Data System (ADS)

Stahl, H. Philip; Henrichs, Todd

2016-09-01

Parametric cost models can be used by designers and project managers to perform relative cost comparisons between major architectural cost drivers and allow high-level design trades; enable cost-benefit analysis for technology development investment; and, provide a basis for estimating total project cost between related concepts. This paper hypothesizes a single model, based on published models and engineering intuition, for both ground and space telescopes: OTA Cost (X) D (1.75 +/- 0.05) λ (-0.5 +/- 0.25) T-0.25 e (-0.04) Y Specific findings include: space telescopes cost 50X to 100X more ground telescopes; diameter is the most important CER; cost is reduced by approximately 50% every 20 years (presumably because of technology advance and process improvements); and, for space telescopes, cost associated with wavelength performance is balanced by cost associated with operating temperature. Finally, duplication only reduces cost for the manufacture of identical systems (i.e. multiple aperture sparse arrays or interferometers). And, while duplication does reduce the cost of manufacturing the mirrors of segmented primary mirror, this cost savings does not appear to manifest itself in the final primary mirror assembly (presumably because the structure for a segmented mirror is more complicated than for a monolithic mirror).

Are drivers with CVD more at risk for motor vehicle crashes? Study of men aged 45 to 70.

PubMed Central

Guibert, R.; Potvin, L.; Ciampi, A.; Loiselle, J.; Philibert, L.; Franco, E. D.

1998-01-01

OBJECTIVE: To examine whether male drivers aged 45 to 70 years suffering from cardiovascular disease (CVD) are more likely to be involved in motor vehicle crashes (MVC) that are reported to the police. DESIGN: Population-based case-control study. SETTING: Data on drivers' ages and medical conditions were compiled from the Societé de l'assurance automobile du Québec's (SAAQ) computerized files. A questionnaire was mailed to all subjects to collect additional information on annual distances driven and various driving behaviours. PARTICIPANTS: Age-stratified population-based random sample. Subjects were 2504 drivers involved in MVCs during a 6-month period; controls were 2520 drivers not involved in crashes. MAIN OUTCOME MEASURES: Proportion of drivers with CVD involved in MVCs. RESULTS: Response rate to the questionnaire was 35.5%. Analysis of the SAAQ files' entire sample of 5024 drivers showed that drivers suffering from CVD were less likely to be involved in MVCs (odds ratio [OR] 0.82, 95% confidence interval [CI] 0.67 to 0.99) than drivers without CVD. Although the estimate of risk remains unchanged when adjusted for age, it becomes statistically insignificant. It also remains unchanged and statistically insignificant when adjusted for yearly distance driven and driver behaviour, as shown by responses to the questionnaire. Drivers suffering from CVD drove significantly less each year (8900 km) than drivers without medical conditions (13,000 km). CONCLUSION: This study shows no increased risk of motor vehicle crashes for drivers suffering from CVD. PMID:9585850

Effect of driver's age and side of impact on crash severity along urban freeways: a mixed logit approach.

PubMed

Haleem, Kirolos; Gan, Albert

2013-09-01

This study identifies geometric, traffic, environmental, vehicle-related, and driver-related predictors of crash injury severity on urban freeways. The study takes advantage of the mixed logit model's ability to account for unobserved effects that are difficult to quantify and may affect the model estimation, such as the driver's reaction at the time of crash. Crashes of 5 years occurring on 89 urban freeway segments throughout the state of Florida in the United States were used. Examples of severity predictors explored include traffic volume, distance of the crash to the nearest ramp, and detailed driver's age, vehicle types, and sides of impact. To show how the parameter estimates could vary, a binary logit model was compared with the mixed logit model. It was found that the at-fault driver's age, traffic volume, distance of the crash to the nearest ramp, vehicle type, side of impact, and percentage of trucks significantly influence severity on urban freeways. Additionally, young at-fault drivers were associated with a significant severity risk increase relative to other age groups. It was also observed that some variables in the binary logit model yielded illogic estimates due to ignoring the random variation of the estimation. Since the at-fault driver's age and side of impact were significant random parameters in the mixed logit model, an in-depth investigation was performed. It was noticed that back, left, and right impacts had the highest risk among middle-aged drivers, followed by young drivers, very young drivers, and finally, old and very old drivers. To reduce side impacts due to lane changing, two primary strategies can be recommended. The first strategy is to conduct campaigns to convey the hazardous effect of changing lanes at higher speeds. The second is to devise in-vehicle side crash avoidance systems to alert drivers of a potential crash risk. The study provided a promising approach to screening the predictors before fitting the mixed logit model using the random forest technique. Furthermore, potential countermeasures were proposed to reduce the severity of impacts. Copyright © 2013 National Safety Council and Elsevier Ltd. All rights reserved.

Land use and land cover change in the North Central Appalachians ecoregion

USGS Publications Warehouse

Napton, D.E.; Sohl, Terry L.; Auch, Roger F.; Loveland, Thomas R.

2003-01-01

The North Central Appalachians ecoregion, spanning northern Pennsylvania and southern New York, has a long history of land use and land cover change. Turn-of-the-century logging dramatically altered the natural landscape of the ecoregion, but subsequent regeneration returned the ecoregion to a forest dominated condition. To understand contemporary land use and land cover changes, the U.S. Geological Survey with NASA and the U.S. Environmental Protection Agency used a random sample of satellite remotely sensed data for 1973, 1980, 1986, 1992, and 2000 to estimate the rates and assess the primary drivers of change in the North Central Appalachians. The overall change was 6.2%. The 1973-1980 period had the lowest rate of change (1.5%); the highest rate (2.9%) occurred during the 1992-2000 period. The primary conversions were deforestation through harvesting and natural disturbance (i.e., tornados) followed by regeneration, and conversion of forests to mining and urban lands. The primary drivers of the change included changes in access, energy and forest prices, and attitudes toward the environment.

Impacts of climate change drivers on C4 grassland productivity: scaling driver effects through the plant community.

PubMed

Polley, H Wayne; Derner, Justin D; Jackson, Robert B; Wilsey, Brian J; Fay, Philip A

2014-07-01

Climate change drivers affect plant community productivity via three pathways: (i) direct effects of drivers on plants; (ii) the response of species abundances to drivers (community response); and (iii) the feedback effect of community change on productivity (community effect). The contribution of each pathway to driver-productivity relationships depends on functional traits of dominant species. We used data from three experiments in Texas, USA, to assess the role of community dynamics in the aboveground net primary productivity (ANPP) response of C4 grasslands to two climate drivers applied singly: atmospheric CO2 enrichment and augmented summer precipitation. The ANPP-driver response differed among experiments because community responses and effects differed. ANPP increased by 80-120g m(-2) per 100 μl l(-1) rise in CO2 in separate experiments with pasture and tallgrass prairie assemblages. Augmenting ambient precipitation by 128mm during one summer month each year increased ANPP more in native than in exotic communities in a third experiment. The community effect accounted for 21-38% of the ANPP CO2 response in the prairie experiment but little of the response in the pasture experiment. The community response to CO2 was linked to species traits associated with greater soil water from reduced transpiration (e.g. greater height). Community effects on the ANPP CO2 response and the greater ANPP response of native than exotic communities to augmented precipitation depended on species differences in transpiration efficiency. These results indicate that feedbacks from community change influenced ANPP-driver responses. However, the species traits that regulated community effects on ANPP differed from the traits that determined how communities responded to drivers. © The Author 2014. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Present status and future prospects of heavy ion beams as drivers for ICF

NASA Astrophysics Data System (ADS)

Godlove, Terry F.

1986-01-01

A candidate driver for a practical inertial fusion reactor system must, among other characteristics, be cost effective and reliable for the parameters required by the fusion target and the remainder of the system. Although the history of large particle accelerators provides abundant evidence of their reliability at high repetition rates, their capital cost for the fusion application has been open to question. Attempts to design cost effective systems began with accelerators based on currently available technology such as RF linacs and storage rings. The West German HIBALL and the Japanese HIBLIC are examples of this initial effort. These designs are sufficiently credible that a strong argument can be made for the heavy ion method in general, but to reduce the cost per unit power it was found necessary to design for large scale, hence high capital cost. Emphasis in the U.S. shifted to newer technologies which offer hope of significant improvement in cost. In this paper the status of various heavy ion driver designs are compared with currently perceived requirements in order to illustrate their potential and assess their development needs.

Design and fabrication of semi-transparent screen based on micro-patterns for direct-view type head-up display in automobiles

NASA Astrophysics Data System (ADS)

Lee, Jae-Yong; Kim, Hyo-Jun; Kim, Young-Joo

2016-02-01

A semi-transparent screen with hemisphere micro-patterns was proposed and designed to enhance the brightness uniformity of the display image toward the driver for a direct-view type head-up display. The hemisphere micro-patterns were designed to consider the inclined angle of the windshield for efficient reflection and scattering toward to the driver. The density and radius of the hemisphere micro-patterns were adjusted as a function of position on the screen based on the geometrical calculation and analyzed by the commercial optical simulation tool based on a ray-tracing method. The designed hemisphere micro-patterns was fabricated by the thermal reflow method and evaluated to confirm the uniform illumination. From the results, the semi-transparent screen with variable micro-patterns shows the 91.9 % of brightness uniformity with the enhanced luminance compare to a screen without micro-patterns. A luminance of fabricated screen also shows good agreement with the simulation result to reflect the clear and bright driving information to the driver.

Design and cost drivers in 2-D braiding

NASA Technical Reports Server (NTRS)

Morales, Alberto

1993-01-01

Fundamentally, the braiding process is a highly efficient, low cost method for combining single yarns into circumferential shapes, as evidenced by the number of applications for continuous sleeving. However, this braiding approach cannot fully demonstrate that it can drastically reduce the cost of complex shape structural preforms. Factors such as part geometry, machine design and configuration, materials used, and operating parameters are described as key cost drivers and what is needed to minimize their effect on elevating the cost of structural braided preforms.

78 FR 32001 - Agency Information Collection Activities; Approval of a New Information Collection Request...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-28

... consultants and academic researchers with expertise in the motor carrier industry and survey design...: Driver and Carrier Surveys Related to Electronic Onboard Recorders (EOBRs), and Potential Harassment... the collection of survey data, the issue of driver harassment and determine the extent to which...

49 CFR 384.225 - CDLIS driver recordkeeping.

Code of Federal Regulations, 2010 CFR

2010-10-01

... operating a CMV. (c) Make CDLIS driver record information required by this section available to the users....231(d). (e) Only the following users or their authorized agents may receive the designated information... procedures. (f) The content of the report provided a user authorized by paragraph (e) of this section from...

Teaching Self Awareness and Group Interaction: A Guide for Driver Education Teachers.

ERIC Educational Resources Information Center

Wisconsin State Dept. of Public Instruction, Madison.

This teaching guide presents materials to help driver education teachers develop classroom discussions designed to raise students' consciousness of themselves, their interactions with others, and the resolution of traffic situations. Small group discussions in the recommended approach. To develop and maintain a conducive classroom atmosphere,…

Driver Improvement Analyst; Basic Training Program. Student Study Guide.

ERIC Educational Resources Information Center

Hale, Allen

As part of the training package for Driver Improvement Analysts, this study guide is designed to serve as the basic reference source for the students/trainees. It reinforces and supplements subject material presented in the Instructor's Lesson Plans. Subjects covered are objectives and requirements, psychology of driving, characteristics of the…

Children's Understanding of Drivers' Intentions

ERIC Educational Resources Information Center

Foot, Hugh C.; Thomson, James A.; Tolmie, Andrew K.; Whelan, Kirstie M.; Morrison, Sheila; Sarvary, Penelope

2006-01-01

To become more skilled as pedestrians, children need to acquire a view of the traffic environment as one in which road users are active agents with different intentions and objectives. This paper describes a simulation study designed to explore children's understanding of drivers' intentions. It also investigated the effect of training children's…

Toms River Drivers Manual 1984-1985.

ERIC Educational Resources Information Center

Thomas, Patricia

The procedures in this manual are designed to establish stability and continuity within the student transportation department of the Toms River Regional Schools in New Jersey. The manual is divided into three sections. Section 1 provides driver and aide specific information. It includes directives related to time clock, spare buses, and…

The Bicycle Driver's Guide.

ERIC Educational Resources Information Center

Pennsylvania State Dept. of Education, Harrisburg. Bureau of Curriculum Services.

Designed to emphasize the concept of the bicycle driver vs. the popular term, bicycle rider, this manual contains guidelines on bicycle safety, addressing itself both to parents and children. The main section topics are: (1) parent responsibility; (2) choosing a bicycle, fitting it to the child, and learning to drive; (3) bicycle equipment,…

Pedal force determination respect to ride comfort

NASA Astrophysics Data System (ADS)

Mačužić, Slavica; Lukić, Jovanka; Glišović, Jasna; Miloradović, Danijela

2017-10-01

Automotive ergonomics is a set of knowledge which has a task to design a vehicle to make the passengers feel comfortable. Interior packaging represents an important stage in the vehicle design process, in order to enable the driver to every important aspect of movement. During the process of driving, the driver performs various movements of arms and legs, leading to a certain fatigue. Each seating position in the vehicle, contain certain boundary conditions, and for that reason it was necessary to examine how the seating position affects the driver possibilities. In this paper, the pedal forces were determined by application of Ramsis human model. Different human populations were taken into account. Correlation between subjects’ anthropometrics measures and the foot pedal force pedal was observed. Obtained results were significant input data for vehicle packaging.

75 FR 69737 - Qualification of Drivers; Exemption Applications; Vision

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-15

... moving violations in a CMV. Michael E. Herrera, Jr., Mr. Herrera, 53, has had primary open angle glaucoma... opinion. Mr. Herrera has sufficient vision to drive a commercial vehicle. Mr. Herrera reported that he has...

Public perceptions of the Midwest's pavements : executive summary: Wisconsin.

DOT National Transportation Integrated Search

2001-01-01

The primary objective of the study was to seek systematic customer input to improve the Departments' pavement improvement policy by: determining how drivers perceive the Departments' pavements in terms of comfort and convenience and related tradeoffs...

The 5As team patient study: patient perspectives on the role of primary care in obesity management.

PubMed

Torti, Jacqueline; Luig, Thea; Borowitz, Michelle; Johnson, Jeffrey A; Sharma, Arya M; Campbell-Scherer, Denise L

2017-02-08

Over 60% of people have overweight or obesity, but only a third report receiving counselling from primary care providers. We explored patients' perspectives on the role of primary care in obesity management and their experience with existing resources, with a view to develop an improved understanding of this perspective, and more effective management strategies. Qualitative study employing semi-structured interviews and thematic analysis, with a sample of 28 patients from a cohort of 255 patients living with obesity and receiving care to support their weight management in a large Primary Care Network of family practices in Alberta. Four illustrative themes emerged: (1) the patient-physician relationship plays an important role in the adequacy of obesity management; (2) patients have clear expectations of substantive conversations with their primary care team; (3) complex conditions affect weight and patients require assistance tailored to individual obesity drivers; (4) current services provide support in important ways (accessibility, availability, accountability, affordability, consistency of messaging), but are not yet meeting patient needs for individual plans, advanced education, and follow-up opportunities. Patients have clear expectations that their primary care physician asks them about weight within a supportive therapeutic relationship. They see obesity as a complex phenomenon with multiple drivers. They want their healthcare providers to assess and address their root causes - not simplistic advice to "eat less, move more". Patients felt that the current services were positive resources, but expressed needs for tailored weight management plans, and longer-term follow-up.

Spatially Modeling the Effects of Meteorological Drivers of PM2.5 in the Eastern United States via a Local Linear Penalized Quantile Regression Estimator.

PubMed

Russell, Brook T; Wang, Dewei; McMahan, Christopher S

2017-08-01

Fine particulate matter (PM 2.5 ) poses a significant risk to human health, with long-term exposure being linked to conditions such as asthma, chronic bronchitis, lung cancer, atherosclerosis, etc. In order to improve current pollution control strategies and to better shape public policy, the development of a more comprehensive understanding of this air pollutant is necessary. To this end, this work attempts to quantify the relationship between certain meteorological drivers and the levels of PM 2.5 . It is expected that the set of important meteorological drivers will vary both spatially and within the conditional distribution of PM 2.5 levels. To account for these characteristics, a new local linear penalized quantile regression methodology is developed. The proposed estimator uniquely selects the set of important drivers at every spatial location and for each quantile of the conditional distribution of PM 2.5 levels. The performance of the proposed methodology is illustrated through simulation, and it is then used to determine the association between several meteorological drivers and PM 2.5 over the Eastern United States (US). This analysis suggests that the primary drivers throughout much of the Eastern US tend to differ based on season and geographic location, with similarities existing between "typical" and "high" PM 2.5 levels.

HEARING IMPAIRMENT AND HYPERTENSION AMONG LONG DISTANCE BUS DRIVERS

PubMed Central

Abdelmoneim, Ismail

2003-01-01

Objectives: To investigate the prevalence of possible hearing impairment and hypertension in long distance bus drivers compared to the city bus drivers in Abha city. Methods: This was a cross-sectional study involving 62 long distance bus drivers and 46 city bus drivers from October 2001 to March 2002. A specially-designed questionnaire was administered to the drivers to explore some of their socioeconomic backgrounds. A pure tone air conduction audiometry and blood pressure measurements were performed. Results: Long distance bus drivers’ workload is significantly higher than that of city drivers (total weekly hours 64.0±14.3 compared to 46.7±5.5). Hearing impairment was significantly more among long distance drivers in the frequencies of 250, 500, 1000 and 2000 Hz especially in the left ear even after age corrections. The prevalence of mild hearing loss and hypertension were also higher among the long distance drivers (19.4% vs 4.5% and 38.7% vs 13% respectively). Conclusion and recommendations: This study showed more hearing affection and a higher prevalence of hypertension among long distance bus drivers than their counterparts operating in the city. Their hearing acuity should be tested before they start work and regularly afterwards. The stresses and strains of the job should be further studied and relieved; and regular health checks including blood pressure monitoring are to be instituted. PMID:23012034

Background music as a risk factor for distraction among young-novice drivers.

PubMed

Brodsky, Warren; Slor, Zack

2013-10-01

There are countless beliefs about the power of music during driving. The last thing one would think about is: how safe is it to listen or sing to music? Unfortunately, collisions linked to music devices have been known for some time; adjusting the radio controls, swapping tape-cassettes and compact-discs, or searching through MP3 files, are all forms of distraction that can result in a near-crash or crash. While the decrement of vehicular performance can also occur from capacity interference to central attention, whether or not music listening is a contributing factor to distraction is relatively unknown. The current study explored the effects of driver-preferred music on driver behavior. 85 young-novice drivers completed six trips in an instrumented Learners Vehicle. The study found that all participants committed at-least 3 driver deficiencies; 27 needed a verbal warning/command and 17 required a steering or braking intervention to prevent an accident. While there were elevated positive moods and enjoyment for trips with driver-preferred music, this background also produced the most frequent severe driver miscalculations and inaccuracies, violations, and aggressive driving. However, trips with music structurally designed to generate moderate levels of perceptual complexity, improved driver behavior and increased driver safety. The study is the first within-subjects on-road high-dose double-exposure clinical-trial investigation of musical stimuli on driver behavior. Copyright © 2013 Elsevier Ltd. All rights reserved.

The influence of anger, impulsivity, sensation seeking and driver attitudes on risky driving behaviour among post-graduate university students in Durban, South Africa.

PubMed

Bachoo, Shaneel; Bhagwanjee, Anil; Govender, Kaymarlin

2013-06-01

Road traffic accidents (RTAs) constitute a serious global health risk, and evidence suggests that young drivers are significantly overrepresented among those injured or killed in RTAs. This study explores the role of anger, impulsivity, sensation seeking and driver attitudes as correlates for risky driving practices among drivers, drawing comparisons between age and gender. The study used a cross-sectional survey design, with a sample of 306 post-graduate university students from two universities in Durban, South Africa, who completed the self-administered questionnaire. The results indicate that drivers with higher driver anger, sensation seeking, urgency, and with a lack of premeditation and perseverance in daily activities were statistically more likely to report riskier driving acts. Males reported significantly more acts of risky driving behaviour (RDB) than females. Driver attitudes significantly predicted self-reported acts of RDB on most indicators. Older drivers (25 years and older) had safer driver attitudes and a lower sense of sensation seeking and urgency in life. Interventions targeting young drivers, which focus on impeding the manifestation of anger, impulsivity and sensation seeking are recommended. Also, the empirical support for the attitude-behaviour hypothesis evidenced in this study vindicates the development or continuation of interventions that focus on this dynamic. Copyright © 2013 Elsevier Ltd. All rights reserved.

Safety reliability evaluation when vehicles turn right from urban major roads onto minor ones based on driver's visual perception.

PubMed

Yu, Bo; Chen, Yuren; Wang, Ruiyun; Dong, Yongjie

2016-10-01

Turning right has a significant impact on urban road traffic safety. Driving into the curve inappropriately or with improper turning speed often leads to a series of potential accidents and hidden dangers. For a long time, the design speed at intersections has been used to determine the physical radius of curbs and channelization, and drivers are expected to drive in accordance with the design speed. However, a large number of real vehicle tests show that for the road without an exclusive right-turn lane, there is not a good correlation between the physical radius of curbs and the turning right speeds. In this paper, shape parameters of the driver's visual lane model are put forward and they have relatively high correlations with right-turn speeds. Hence, an evaluation method about safety reliability of turning right from urban major roads onto minor ones based on driver's visual perception is proposed. For existing roads, the evaluation object could be real driving videos; for those under construction roads, the evaluation object could be visual scenes obtained from a driving simulation device. Findings in this research will make a contribution to the optimization of right-turn design at intersections and lead to the development of auxiliary driving technology. Copyright © 2015 Elsevier Ltd. All rights reserved.

Design and Implementation of Real-Time Vehicular Camera for Driver Assistance and Traffic Congestion Estimation

PubMed Central

Son, Sanghyun; Baek, Yunju

2015-01-01

As society has developed, the number of vehicles has increased and road conditions have become complicated, increasing the risk of crashes. Therefore, a service that provides safe vehicle control and various types of information to the driver is urgently needed. In this study, we designed and implemented a real-time traffic information system and a smart camera device for smart driver assistance systems. We selected a commercial device for the smart driver assistance systems, and applied a computer vision algorithm to perform image recognition. For application to the dynamic region of interest, dynamic frame skip methods were implemented to perform parallel processing in order to enable real-time operation. In addition, we designed and implemented a model to estimate congestion by analyzing traffic information. The performance of the proposed method was evaluated using images of a real road environment. We found that the processing time improved by 15.4 times when all the proposed methods were applied in the application. Further, we found experimentally that there was little or no change in the recognition accuracy when the proposed method was applied. Using the traffic congestion estimation model, we also found that the average error rate of the proposed model was 5.3%. PMID:26295230

Design and Implementation of Real-Time Vehicular Camera for Driver Assistance and Traffic Congestion Estimation.

PubMed

Son, Sanghyun; Baek, Yunju

2015-08-18

As society has developed, the number of vehicles has increased and road conditions have become complicated, increasing the risk of crashes. Therefore, a service that provides safe vehicle control and various types of information to the driver is urgently needed. In this study, we designed and implemented a real-time traffic information system and a smart camera device for smart driver assistance systems. We selected a commercial device for the smart driver assistance systems, and applied a computer vision algorithm to perform image recognition. For application to the dynamic region of interest, dynamic frame skip methods were implemented to perform parallel processing in order to enable real-time operation. In addition, we designed and implemented a model to estimate congestion by analyzing traffic information. The performance of the proposed method was evaluated using images of a real road environment. We found that the processing time improved by 15.4 times when all the proposed methods were applied in the application. Further, we found experimentally that there was little or no change in the recognition accuracy when the proposed method was applied. Using the traffic congestion estimation model, we also found that the average error rate of the proposed model was 5.3%.

Design of a quasi-CW laser diode driver for space-based laser transmitter

NASA Astrophysics Data System (ADS)

Singh, Ravindra; Dangwal, Nishma; Chandraprakash, .; Agrawal, Lalita; Pal, Suranjan; Kamlakar, J. A.

2006-12-01

LASTEC Delhi in a joint collaborative activity with LEOS, Bangalore is developing a space qualified diode array pumped Nd:YAG laser transmitter delivering 30 mJ @ 10 pps of 10 ns duration. For space applications laser diodes are preferred because of their excellent reliability with lifetimes exceeding 100,000 hours. However, they are extremely sensitive to electro-static discharge, excessive current levels, and current spikes and transients. Small variations in bias voltage may produce large fluctuations in the current causing instability and damage to the device. Hence instead of the traditional power supplies a current controlled laser diode driver is required. This paper presents the design of a Q-CW laser diode driver based on closed loop current regulator, capable of driving 24 QCW laser diode bars each with 75W peak power at 70 A. The driver can generate up to 100 Amp peak current and 200μsec pulse width operating at 10 Hz. The current source design includes special circuits for low noise operation, slow turn-on and turn-off, circuits for over voltage and transient current protection; and good regulation. Space qualified and radiation hardened components are required to be used to sustain stringent space environment requirements during mission life of two years.

Prevalence of drug use among drivers based on mandatory, random tests in a roadside survey

PubMed Central

Alcañiz, Manuela; Guillen, Montserrat

2018-01-01

Background In the context of road safety, this study aims to examine the prevalence of drug use in a random sample of drivers. Methods A stratified probabilistic sample was designed to represent vehicles circulating on non-urban roads. Random drug tests were performed during autumn 2014 on 521 drivers in Catalonia (Spain). Participation was mandatory. The prevalence of drug driving for cannabis, methamphetamines, amphetamines, cocaine, opiates and benzodiazepines was assessed. Results The overall prevalence of drug use is 16.4% (95% CI: 13.9; 18.9) and affects primarily younger male drivers. Drug use is similarly prevalent during weekdays and on weekends, but increases with the number of occupants. The likelihood of being positive for methamphetamines is significantly higher for drivers of vans and lorries. Conclusions Different patterns of use are detected depending on the drug considered. Preventive drug tests should not only be conducted on weekends and at night-time, and need to be reinforced for drivers of commercial vehicles. Active educational campaigns should focus on the youngest age-group of male drivers. PMID:29920542

Detecting Driver Drowsiness Based on Sensors: A Review

PubMed Central

Sahayadhas, Arun; Sundaraj, Kenneth; Murugappan, Murugappan

2012-01-01

In recent years, driver drowsiness has been one of the major causes of road accidents and can lead to severe physical injuries, deaths and significant economic losses. Statistics indicate the need of a reliable driver drowsiness detection system which could alert the driver before a mishap happens. Researchers have attempted to determine driver drowsiness using the following measures: (1) vehicle-based measures; (2) behavioral measures and (3) physiological measures. A detailed review on these measures will provide insight on the present systems, issues associated with them and the enhancements that need to be done to make a robust system. In this paper, we review these three measures as to the sensors used and discuss the advantages and limitations of each. The various ways through which drowsiness has been experimentally manipulated is also discussed. We conclude that by designing a hybrid drowsiness detection system that combines non-intusive physiological measures with other measures one would accurately determine the drowsiness level of a driver. A number of road accidents might then be avoided if an alert is sent to a driver that is deemed drowsy. PMID:23223151

The driver, the road, the rules … and the rest? A systems-based approach to young driver road safety.

PubMed

Scott-Parker, B; Goode, N; Salmon, P

2015-01-01

The persistent overrepresentation of young drivers in road crashes is universally recognised. A multitude of factors influencing their behaviour and safety have been identified through methods including crash analyses, simulated and naturalistic driving studies, and self-report measures. Across the globe numerous, diverse, countermeasures have been implemented; the design of the vast majority of these has been informed by a driver-centric approach. An alternative approach gaining popularity in transport safety is the systems approach which considers not only the characteristics of the individual, but also the decisions and actions of other actors within the road transport system, along with the interactions amongst them. This paper argues that for substantial improvements to be made in young driver road safety, what has been learnt from driver-centric research needs to be integrated into a systems approach, thus providing a holistic appraisal of the young driver road safety problem. Only then will more effective opportunities and avenues for intervention be realised. Copyright © 2014 Elsevier Ltd. All rights reserved.

Fatigue in Younger and Older Drivers: Effectiveness of an Alertness-Maintaining Task.

PubMed

Song, Woojin; Woon, Fu L; Doong, Alice; Persad, Carol; Tijerina, Louis; Pandit, Pooja; Cline, Carol; Giordani, Bruno

2017-09-01

The aim of this study was to examine the effects of an alertness-maintaining task (AMT) in older, fatigued drivers. Fatigue during driving increases crash risk, and previous research suggests that alertness and driving in younger adults may be improved using a secondary AMT during boring, fatigue-eliciting drives. However, the potential impact of an AMT on driving has not been investigated in older drivers whose ability to complete dual tasks has been shown to decline and therefore may be negatively affected with an AMT in driving. Younger ( n = 29) and older drivers ( n = 39) participated in a 50-minute simulated drive designed to induce fatigue, followed by four 10-minute sessions alternating between driving with and without an AMT. Younger drivers were significantly more affected by fatigue on driving performance than were older drivers but benefitted significantly from the AMT. Older drivers did not demonstrate increased driver errors with fatigue, and driving did not deteriorate significantly during participation in the AMT condition, although their speed was significantly more variable with the AMT. Consistent with earlier research, an AMT applied during fatiguing driving is effective in improving alertness and reducing driving errors in younger drivers. Importantly, older drivers were relatively unaffected by fatigue, and use of an AMT did not detrimentally affect their driving performance. These results support the potential use of an AMT as a new automotive technology to improve fatigue and promote driver safety, though the benefits of such technology may differ between different age groups.

The flight telerobotic servicer Tinman concept: System design drivers and task analysis

NASA Technical Reports Server (NTRS)

Andary, J. F.; Hewitt, D. R.; Hinkal, S. W.

1989-01-01

A study was conducted to develop a preliminary definition of the Flight Telerobotic Servicer (FTS) that could be used to understand the operational concepts and scenarios for the FTS. Called the Tinman, this design concept was also used to begin the process of establishing resources and interfaces for the FTS on Space Station Freedom, the National Space Transportation System shuttle orbiter, and the Orbital Maneuvering vehicle. Starting with an analysis of the requirements and task capabilities as stated in the Phase B study requirements document, the study identified eight major design drivers for the FTS. Each of these design drivers and their impacts on the Tinman design concept are described. Next, the planning that is currently underway for providing resources for the FTS on Space Station Freedom is discussed, including up to 2000 W of peak power, up to four color video channels, and command and data rates up to 500 kbps between the telerobot and the control station. Finally, an example is presented to show how the Tinman design concept was used to analyze task scenarios and explore the operational capabilities of the FTS. A structured methodology using a standard terminology consistent with the NASA/National Bureau of Standards Standard Reference Model for Telerobot Control System Architecture (NASREM) was developed for this analysis.

Contributing Factors to Driver's Over-trust in a Driving Support System for Workload Reduction

NASA Astrophysics Data System (ADS)

Itoh, Makoto

Avoiding over-trust in machines is a vital issue in order to establish intelligent driver support systems. It is necessary to distinguish systems for workload reduction from systems for accident prevention/mitigation. This study focuses on over-trust in an Adaptive Cruise Control (ACC) system as a typical driving support system for workload reduction. By conducting an experiment, we obtained a case in which a driver trusted the ACC system too much. Concretely speaking, the driver just watched the ACC system crashing into a stopped car even though the ACC system was designed to ignore such stopped cars. This paper investigates possible contributing factors to the driver' s over-trust in the ACC system. The results suggest that emerging trust in the dimension of performance may cause over-trust in the dimension of method or purpose.

Mass drivers. 3: Engineering

NASA Technical Reports Server (NTRS)

Arnold, W.; Bowen, S.; Cohen, S.; Fine, K.; Kaplan, D.; Kolm, M.; Kolm, H.; Newman, J.; Oneill, G. K.; Snow, W.

1979-01-01

The last of a series of three papers by the Mass-Driver Group of the 1977 Ames Summer Study is presented. It develops the engineering principles required to implement the basic mass-driver. Optimum component mass trade-offs are derived from a set of four input parameters, and the program used to design a lunar launcher. The mass optimization procedures is then incorporated into a more comprehensive mission optimization program called OPT-4, which evaluates an optimized mass-driver reaction engine and its performance in a range of specified missions. Finally, this paper discusses, to the extent that time permitted, certain peripheral problems: heating effects in buckets due to magnetic field ripple; an approximate derivation of guide force profiles; the mechanics of inserting and releasing payloads; the reaction mass orbits; and a proposed research and development plan for implementing mass drivers.

Using a 'value-added' approach for contextual design of geographic information.

PubMed

May, Andrew J

2013-11-01

The aim of this article is to demonstrate how a 'value-added' approach can be used for user-centred design of geographic information. An information science perspective was used, with value being the difference in outcomes arising from alternative information sets. Sixteen drivers navigated a complex, unfamiliar urban route, using visual and verbal instructions representing the distance-to-turn and junction layout information presented by typical satellite navigation systems. Data measuring driving errors, navigation errors and driver confidence were collected throughout the trial. The results show how driver performance varied considerably according to the geographic context at specific locations, and that there are specific opportunities to add value with enhanced geographical information. The conclusions are that a value-added approach facilitates a more explicit focus on 'desired' (and feasible) levels of end user performance with different information sets, and is a potentially effective approach to user-centred design of geographic information. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Next-generation clinical trials: Novel strategies to address the challenge of tumor molecular heterogeneity.

PubMed

Catenacci, Daniel V T

2015-05-01

The promise of 'personalized cancer care' with therapies toward specific molecular aberrations has potential to improve outcomes. However, there is recognized heterogeneity within any given tumor-type from patient to patient (inter-patient heterogeneity), and within an individual (intra-patient heterogeneity) as demonstrated by molecular evolution through space (primary tumor to metastasis) and time (after therapy). These issues have become hurdles to advancing cancer treatment outcomes with novel molecularly targeted agents. Classic trial design paradigms are challenged by heterogeneity, as they are unable to test targeted therapeutics against low frequency genomic 'oncogenic driver' aberrations with adequate power. Usual accrual difficulties to clinical trials are exacerbated by low frequencies of any given molecular driver. To address these challenges, there is need for innovative clinical trial designs and strategies implementing novel diagnostic biomarker technologies to account for inter-patient molecular diversity and scarce tissue for analysis. Importantly, there is also need for pre-defined treatment priority algorithms given numerous aberrations commonly observed within any one individual sample. Access to multiple available therapeutic agents simultaneously is crucial. Finally intra-patient heterogeneity through time may be addressed by serial biomarker assessment at the time of tumor progression. This report discusses various 'next-generation' biomarker-driven trial designs and their potentials and limitations to tackle these recognized molecular heterogeneity challenges. Regulatory hurdles, with respect to drug and companion diagnostic development and approval, are considered. Focus is on the 'Expansion Platform Design Types I and II', the latter demonstrated with a first example, 'PANGEA: Personalized Anti-Neoplastics for Gastro-Esophageal Adenocarcinoma'. Applying integral medium-throughput genomic and proteomic assays along with a practical biomarker assessment and treatment algorithm, 'PANGEA' attempts to address the problem of heterogeneity towards successful implementation of molecularly targeted therapies. Copyright © 2014 The Author. Published by Elsevier B.V. All rights reserved.

Driving Performance After Self-Regulated Control Transitions in Highly Automated Vehicles.

PubMed

Eriksson, Alexander; Stanton, Neville A

2017-12-01

This study aims to explore whether driver-paced, noncritical transitions of control may counteract some of the aftereffects observed in the contemporary literature, resulting in higher levels of vehicle control. Research into control transitions in highly automated driving has focused on urgent scenarios where drivers are given a relatively short time span to respond to a request to resume manual control, resulting in seemingly scrambled control when manual control is resumed. Twenty-six drivers drove two scenarios with an automated driving feature activated. Drivers were asked to read a newspaper or monitor the system and relinquish or resume control from the automation when prompted by vehicle systems. Driving performance in terms of lane positioning and steering behavior was assessed for 20 seconds post resuming control to capture the resulting level of control. It was found that lane positioning was virtually unaffected for the duration of the 20-second time span in both automated conditions compared to the manual baseline when drivers resumed manual control; however, significant increases in the standard deviation of steering input were found for both automated conditions compared to baseline. No significant differences were found between the two automated conditions. The results indicate that when drivers self-paced the transfer back to manual control they exhibit less of the detrimental effects observed in system-paced conditions. It was shown that self-paced transitions could reduce the risk of accidents near the edge of the operational design domain. Vehicle manufacturers must consider these benefits when designing contemporary systems.

Evaluating the effectiveness of a road safety education intervention for pre-drivers: an application of the theory of planned behaviour.

PubMed

Poulter, Damian R; McKenna, Frank P

2010-06-01

Young drivers are overrepresented in road traffic fatalities and collisions. Attempts to address this problem with pre-driver education have not met with unambiguous success. However, there is a lack of research on whether pre-driver education can change psychological antecedents to behaviour. The framework of the theory of planned behaviour (TPB) was employed to assess the effectiveness of an educational intervention used across the UK that aims to improve attitudes to road safety in pre-drivers. Secondary school students aged 15-16 years participated in the research, drawn from 12 schools in the UK. A total of 199 students took part in Expt 1 and 430 in Expt 2. Expt 1 employed a within-participants design to measure any changes in road safety beliefs from pre- to post-intervention and 5-month follow-up. Expt 2 used a between-participants design to test whether any changes were genuine or due to experimenter effects. Results of Expt 1 revealed a small, short-term improvement in some pre-driver beliefs immediately following the educational intervention, but no effect on other beliefs, and some evidence of unintended outcomes. The small, significant improvements found in Expt 1 were replicated in Expt 2, which is consistent with there being a genuine effect. Considering evidence from both experiments suggests the effectiveness of road safety education interventions are at best short term, and limited to some but not all psychological factors, with some risk of unintended consequences.

Factors correlated with traffic accidents as a basis for evaluating Advanced Driver Assistance Systems.

PubMed

Staubach, Maria

2009-09-01

This study aims to identify factors which influence and cause errors in traffic accidents and to use these as a basis for information to guide the application and design of driver assistance systems. A total of 474 accidents were examined in depth for this study by means of a psychological survey, data from accident reports, and technical reconstruction information. An error analysis was subsequently carried out, taking into account the driver, environment, and vehicle sub-systems. Results showed that all accidents were influenced by errors as a consequence of distraction and reduced activity. For crossroad accidents, there were further errors resulting from sight obstruction, masked stimuli, focus errors, and law infringements. Lane departure crashes were additionally caused by errors as a result of masked stimuli, law infringements, expectation errors as well as objective and action slips, while same direction accidents occurred additionally because of focus errors, expectation errors, and objective and action slips. Most accidents were influenced by multiple factors. There is a safety potential for Advanced Driver Assistance Systems (ADAS), which support the driver in information assimilation and help to avoid distraction and reduced activity. The design of the ADAS is dependent on the specific influencing factors of the accident type.

Battery electric vehicles - implications for the driver interface.

PubMed

Neumann, Isabel; Krems, Josef F

2016-03-01

The current study examines the human-machine interface of a battery electric vehicle (BEV) from a user-perspective, focussing on the evaluation of BEV-specific displays, the relevance of provided information and challenges for drivers due to the concept of electricity in a road vehicle. A sample of 40 users drove a BEV for 6 months. Data were gathered at three points of data collection. Participants perceived the BEV-specific displays as only moderately reliable and helpful for estimating the displayed parameters. This was even less the case after driving the BEV for 3 months. A taxonomy of user requirements was compiled revealing the need for improved and additional information, especially regarding energy consumption and efficiency. Drivers had difficulty understanding electrical units and the energy consumption of the BEV. On the background of general principles for display design, results provide implications how to display relevant information and how to facilitate drivers' understanding of energy consumption in BEVs. Practitioner Summary: Battery electric vehicle (BEV) displays need to incorporate new information. A taxonomy of user requirements was compiled revealing the need for improved and additional information in the BEV interface. Furthermore, drivers had trouble understanding electrical units and energy consumption; therefore, appropriate assistance is required. Design principles which are specifically important in the BEV context are discussed.

Motor vehicle driver injury and socioeconomic status: a cohort study with prospective and retrospective driver injuries

PubMed Central

Whitlock, G; Norton, R; Clark, T; Pledger, M; Jackson, R; MacMahon, S

2003-01-01

Study objective: To investigate the association between motor vehicle driver injury and socioeconomic status. Design: Cohort study with prospective and retrospective outcomes. Setting: New Zealand. Participants: 10 525 adults (volunteer sample of a multi-industry workforce, n=8008; and a random sample of urban electoral rolls, n=2517). Outcome measure: Motor vehicle driver injury resulting in admission of the driver to hospital or the driver's death, or both, during the period 1988–98; hospitalisation and mortality data were obtained by record linkage to national health databases. Main results: After adjustment for age and sex, driver injury risk was inversely associated with both occupational status (p for linear trend <0.0001) and educational level (p for linear trend =0.007). Participants in the lowest approximate quartile of occupational status were four times as likely (HR 4.17, 95% CI 2.31 to 7.55) to have experienced a driver injury during follow up as participants in the highest approximate quartile. Participants who had been to secondary school for less than two years were twice as likely (HR 2.26, 95% CI 1.34 to 3.81) to have experienced a driver injury as those who had been to university or polytechnic. There was little evidence that driver injury risk was associated with neighbourhood income (p for linear trend =0.12) Conclusions: Occupational status and educational level seem to be important determinants of driver injury risk. Driver injury countermeasures should be targeted to people in low status occupations, as well as to people with comparatively little formal education. PMID:12821697

Toxoplasma gondii infection in interstate truck drivers: a case-control seroprevalence study.

PubMed

Alvarado-Esquivel, Cosme; Pacheco-Vega, Sandy Janet; Hernández-Tinoco, Jesús; Salcedo-Jáquez, Misael; Sánchez-Anguiano, Luis Francisco; Berumen-Segovia, Luis Omar; Rábago-Sánchez, Elizabeth; Liesenfeld, Oliver

2015-02-05

Infection with Toxoplasma gondii can be acquired via the ingestion of undercooked or raw meat containing tissue cysts, or via ingestion of water contaminated with oocysts. Professional long distance truck driving may have epidemiological importance for food-borne infections since drivers eat out of home and in places where hygiene and cooking practices are uncertain. We aimed to determine whether interstate truck drivers in Durango, Mexico have an increased risk of infection with T. gondii as indicated by seropositivity; and to determine the socio-demographic, work, clinical, and behavioral characteristics associated with T. gondii seropositivity in interstate truck drivers. Through a case-control study design, 192 truck drivers and 192 controls from the general population of the same region matched by gender and age were examined with enzyme-linked immunoassays for the presence of anti-Toxoplasma IgG and IgM antibodies. Socio-demographic, work, clinical and behavioral characteristics from the truck drivers were obtained. Anti-T. gondii IgG antibodies were found in 23 (12.0%) of 192 truck drivers and in 13 (6.8%) of 192 controls (OR = 21.0; 95% CI: 1.23-358.38; P = 0.002). Anti-T. gondii IgM antibodies were found in 7 (3.6%) cases and in 7 (3.6%) controls (P = 1.00). The seroprevalence of T. gondii infection was higher in drivers with reflex impairment than in those without this impairment (4/13, 30.8% vs 19/179, 10.6%, respectively; P = 0.05), and in drivers with hearing impairment than in those without this impairment (3/7, 42.9% vs 20/185, 10.8%, respectively; P = 0.03). Multivariate analysis of work and behavioral characteristics of truck drives showed positive associations of T. gondii exposure with trips to the south of Mexico (OR = 3.11; 95% CI: 1.02-9.44; P = 0.04) and consumption of horse meat (OR = 5.18; 95% CI: 1.62-16.55; P = 0.005). Results suggest that interstate truck drivers may have an increased risk for T. gondii infection, and that T. gondii exposure may be impacting neurological functions in truck drivers. Contributing factors for T. gondii exposure should be taken into account for the design of optimal prevention measures against T. gondii infection.

Design and Analysis of a Formation Flying System for the Cross-Scale Mission Concept

NASA Technical Reports Server (NTRS)

Cornara, Stefania; Bastante, Juan C.; Jubineau, Franck

2007-01-01

The ESA-funded "Cross-Scale Technology Reference Study has been carried out with the primary aim to identify and analyse a mission concept for the investigation of fundamental space plasma processes that involve dynamical non-linear coupling across multiple length scales. To fulfill this scientific mission goal, a constellation of spacecraft is required, flying in loose formations around the Earth and sampling three characteristic plasma scale distances simultaneously, with at least two satellites per scale: electron kinetic (10 km), ion kinetic (100-2000 km), magnetospheric fluid (3000-15000 km). The key Cross-Scale mission drivers identified are the number of S/C, the space segment configuration, the reference orbit design, the transfer and deployment strategy, the inter-satellite localization and synchronization process and the mission operations. This paper presents a comprehensive overview of the mission design and analysis for the Cross-Scale concept and outlines a technically feasible mission architecture for a multi-dimensional investigation of space plasma phenomena. The main effort has been devoted to apply a thorough mission-level trade-off approach and to accomplish an exhaustive analysis, so as to allow the characterization of a wide range of mission requirements and design solutions.

Occupational accidents among ambulance drivers in the emergency relief.

PubMed

Takeda, Elisabete; do Carmo Cruz Robazzi, Maria Lúcia

2007-01-01

We analyzed the occurrence of occupational accidents (OA) among ambulance drivers in Emergency Relief (ER), with a view to disclosing the types of events and their causes. A quantitative-qualitative study was carried out through the interview of 22 workers in a city in São Paulo, Brazil. The subjects were male, between 36 and 40 years old (40.9%), married (81.82%), with uncompleted primary education (40.9%), individual (90.9%) and family (54.55%) income between two and four Brazilian minimum wages, not performing any other paid occupation (45.45%). The majority of the OA were typical, due to an excess of exercises and vigorous and repeated movements (42.11%) and aggression through body strength and other means (26.33%). The OA occurs mainly because drivers carry out tasks that do not suit their professional formation.

Modeling lung cancer evolution and preclinical response by orthotopic mouse allografts.

PubMed

Ambrogio, Chiara; Carmona, Francisco J; Vidal, August; Falcone, Mattia; Nieto, Patricia; Romero, Octavio A; Puertas, Sara; Vizoso, Miguel; Nadal, Ernest; Poggio, Teresa; Sánchez-Céspedes, Montserrat; Esteller, Manel; Mulero, Francisca; Voena, Claudia; Chiarle, Roberto; Barbacid, Mariano; Santamaría, David; Villanueva, Alberto

2014-11-01

Cancer evolution is a process that is still poorly understood because of the lack of versatile in vivo longitudinal studies. By generating murine non-small cell lung cancer (NSCLC) orthoallobanks and paired primary cell lines, we provide a detailed description of an in vivo, time-dependent cancer malignization process. We identify the acquisition of metastatic dissemination potential, the selection of co-driver mutations, and the appearance of naturally occurring intratumor heterogeneity, thus recapitulating the stochastic nature of human cancer development. This approach combines the robustness of genetically engineered cancer models with the flexibility of allograft methodology. We have applied this tool for the preclinical evaluation of therapeutic approaches. This system can be implemented to improve the design of future treatments for patients with NSCLC. ©2014 American Association for Cancer Research.

Rho-Isp Revisited and Basic Stage Mass Estimating for Launch Vehicle Conceptual Sizing Studies

NASA Technical Reports Server (NTRS)

Kibbey, Timothy P.

2015-01-01

The ideal rocket equation is manipulated to demonstrate the essential link between propellant density and specific impulse as the two primary stage performance drivers for a launch vehicle. This is illustrated by examining volume-limited stages such as first stages and boosters. This proves to be a good approximation for first-order or Phase A vehicle design studies for solid rocket motors and for liquid stages, except when comparing to hydrogen-fueled stages. A next-order mass model is developed that is able to model the mass differences between hydrogen-fueled and other stages. Propellants considered range in density from liquid methane to inhibited red fuming nitric acid. Calculated comparisons are shown for solid rocket boosters, liquid first stages, liquid upper stages, and a balloon-deployed single-stage-to-orbit concept. The derived relationships are ripe for inclusion in a multi-stage design space exploration and optimization algorithm, as well as for single-parameter comparisons such as those shown herein.

Inter-annual variability and spatial coherence of net primary productivity across a western Oregon Cascades landscape

Treesearch

Travis J. Woolley; Mark E. Harmon; Kari B. O’Connell

2015-01-01

Inter-annual variability (IAV) of forest Net Primary Productivity (NPP) is a function of both extrinsic (e.g., climate) and intrinsic (e.g., stand dynamics) drivers. As estimates of NPP in forests are scaled from trees to stands to the landscape, an understanding of the relative effects of these factors on spatial and temporal behavior of NPP is important. Although a...

Development of Data Acquisition Card Driver for ICRH System on EAST

NASA Astrophysics Data System (ADS)

Liu, Daming; Luo, Jiarong; Zhao, Yanping; Qin, Chengming

2008-04-01

Presented in this paper is the development of the driver for the data acquisition card with a peripheral component interconnection (PCI) local bus on the ion cyclotron range of frequency heating (ICRH) system. The driver is mainly aimed at the embedded VxWorks system (real-time operating system) which is widely used in various fields of real-time systems. An efficient way is employed to develop this driver, which will advance the real-time control of the ICRH system on the experimental advanced superconductor tokamak (EAST). The driver is designed using the TORNADO integrated development environment (IDE), and implemented in C plus language. The details include the hardware configuration, analogue/digital (A/D) and digital/analogue (D/A) conversion, input and output (I/O) operation of the driver to support over five cards. The data acquisition card can be manipulated in a low-level program and meet the requirements of A/D conversion and D/A outputs.

Directing driver attention with augmented reality cues

PubMed Central

Rusch, Michelle L.; Schall, Mark C.; Gavin, Patrick; Lee, John D.; Dawson, Jeffrey D.; Vecera, Shaun; Rizzo, Matthew

2013-01-01

This simulator study evaluated the effects of augmented reality (AR) cues designed to direct the attention of experienced drivers to roadside hazards. Twenty-seven healthy middle-aged licensed drivers with a range of attention capacity participated in a 54 mile (1.5 hour) drive in an interactive fixed-base driving simulator. Each participant received AR cues to potential roadside hazards in six simulated straight (9 mile long) rural roadway segments. Drivers were evaluated on response time for detecting a potentially hazardous event, detection accuracy for target (hazard) and non-target objects, and headway with respect to the hazards. Results showed no negative outcomes associated with interference. AR cues did not impair perception of non-target objects, including for drivers with lower attentional capacity. Results showed near significant response time benefits for AR cued hazards. AR cueing increased response rate for detecting pedestrians and warning signs but not vehicles. AR system false alarms and misses did not impair driver responses to potential hazards. PMID:24436635

Special Considerations in Distracted Driving with Teens

PubMed Central

Durbin, Dennis R; McGehee, Daniel V; Fisher, Donald; McCartt, Anne

2014-01-01

Novice teen drivers have long been known to have an increased risk of crashing, as well as increased tendencies toward unsafe and risky driving behaviors. Teens are unique as drivers for several reasons, many of which have implications specifically in the area of distracted driving. This paper reviews several of these features, including the widespread prevalence of mobile device use by teens, their lack of driving experience, the influence of peer passengers as a source of distraction, the role of parents in influencing teens’ attitudes and behaviors relevant to distracted driving and the impact of laws designed to prevent mobile device use by teen drivers. Recommendations for future research include understanding how engagement in a variety of secondary tasks by teen drivers affects their driving performance or crash risk; understanding the respective roles of parents, peers and technology in influencing teen driver behavior; and evaluating the impact of public policy on mitigating teen crash risk related to driver distraction. PMID:24776228

The Effect of Driver Age On The Incidence And Severity Of Upper Extremity Injuries Due To Second Generation Front Air Bag Deployment

PubMed Central

Marshall, Rafael; Hunting, Katherine; McKay, Mary Pat

2010-01-01

This study used NHTSA NASS/CDS data to examine whether advancing age was associated with a higher incidence and severity of front airbag-related upper extremity injury (UEI). Using a retrospective cohort design we analyzed weighted data from 1998–2007 for. The study population consisted of lap/shoulder belted people over 16 years of age who were driving passenger vehicles with model years 1998–2003 and were involved in a frontal crash where their front airbag deployed. Drivers who were ejected, involved in a vehicle rollover, or accompanied by a passenger sitting directly behind them were omitted. The exposure variable was age and the outcome variables were UEI incidence and severity. Associations were adjusted for gender, seat track position, vehicle type, vehicle weight, intrusion, and delta-v. Logistic regressions were performed using SAS survey procedures to account for the complex survey design. Overall, 42% of drivers sustained an UEI. Advancing age was associated with a higher incidence (p<0. 0001) and severity (p<0. 0001) of UEI. Nineteen percent of drivers sustained an UEI related to the airbag. No significant differences in the incidence or severity of airbag-related UEI were found between young drivers and older driver age groups. The degree of severity due to airbag-related UEI was generally minor. The majority of airbag-related UEI appeared to shift slightly from abrasions to contusions with aging. These results indicate that UEI due to depowered airbag deployment is common but not disproportionately high among older drivers, and injury severity is generally minor across all age groups. PMID:21050604

Your Travtek Driving Experience -- Rental Users Study Data Summary

DOT National Transportation Integrated Search

1993-11-01

THIS REPORT DOCUMENTS THE QUESTIONNAIRE DATA COLLECTED AND THE INSTRUMENTS USED FOR THE TRAVTEK EVALUATION TASK BL - RENTAL USERS STUDY. IT PRESENTS SUMMARY STATISTICS FOR THE PRIMARY DRIVERS DERIVED FROM THE RENTER STUDY, WHICH WAS CONDUCTED FROM MA...

Parental Influence on Driver Licensure in Adolescence: A Randomized Controlled Trial

PubMed Central

Mirman, Jessica H.; Curry, Allison E.; Winston, Flaura K.; Fisher Thiel, Megan C.; Pfeiffer, Melissa R.; Rogers, Rachel; Elliott, Michael R.; Durbin, Dennis R.

2017-01-01

Objective Newly licensed adolescent drivers have skill deficits that increase risk for motor vehicle crashes. Development of programs targeted to prelicensed adolescents has been hindered by concerns about encouraging overconfidence and early licensure. The study had 2 primary objectives: (a) determine whether an Internet-based intervention designed to improve parent-supervised practice (TeenDrivingPlan [TDP]) influenced adolescents’ time to licensure and parents’ perceptions of adolescents’ driving skill, expertise, and safety and (b) evaluate the association of these perceptions and practice diversity (number of different environments where practiced occurred) with time to licensure. Method A randomized controlled trial was used to compare TDP with a control condition. Participants (N = 295 parent–adolescent dyads) completed periodic surveys over 24 weeks and were subsequently followed for up to a year to determine adolescents’ licensure status. Results TDP did not influence time to licensure and did not affect parents’ perceptions of skill, expertise, and safety. Practice diversity was associated with faster licensure. A more favorable perception of adolescents’ skill in comparison to peers was associated with faster licensure. Conclusions Targeting parents’ beliefs about adolescents’ safety in relation to other road users may not be conducive to altering licensing trajectories, whereas sensitizing parents to their adolescents’ emerging skills might be more effective in promoting safe entry into licensure. PMID:27936811

Application of an impedance matching transformer to a plasma focus.

PubMed

Bures, B L; James, C; Krishnan, M; Adler, R

2011-10-01

A plasma focus was constructed using an impedance matching transformer to improve power transfer between the pulse power and the dynamic plasma load. The system relied on two switches and twelve transformer cores to produce a 100 kA pulse in short circuit on the secondary at 27 kV on the primary with 110 J stored. With the two transformer systems in parallel, the Thevenin equivalent circuit parameters on the secondary side of the driver are: C = 10.9 μF, V(0) = 4.5 kV, L = 17 nH, and R = 5 mΩ. An equivalent direct drive circuit would require a large number of switches in parallel, to achieve the same Thevenin equivalent. The benefits of this approach are replacement of consumable switches with non-consumable transformer cores, reduction of the driver inductance and resistance as viewed by the dynamic load, and reduction of the stored energy to produce a given peak current. The system is designed to operate at 100 Hz, so minimizing the stored energy results in less load on the thermal management system. When operated at 1 Hz, the neutron yield from the transformer matched plasma focus was similar to the neutron yield from a conventional (directly driven) plasma focus at the same peak current.

AlliedSignal driver's viewer enhancement (DVE) for paramilitary and commercial applications

NASA Astrophysics Data System (ADS)

Emanuel, Michael; Caron, Hubert; Kovacevic, Branislav; Faina-Cherkaoui, Marcela; Wrobel, Leslie; Turcotte, Gilles

1999-07-01

AlliedSignal Driver's Viewer Enhancement (DVE) system is a thermal imager using a 320 X 240 uncooled microbolometer array. This high performance system was initially developed for military combat and tactical wheeled vehicles. It features a very small sensor head remotely mounted from the display, control and processing module. The sensor head has a modular design and is being adapted to various commercial applications such as truck and car-driving aid, using specifically designed low cost optics. Tradeoffs in the system design, system features and test results are discussed in this paper. A short video shows footage of the DVE system while driving at night.

76 FR 30232 - Hours of Service (HOS) of Drivers; Application of American Pyrotechnics Association (APA) for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-24

...-28043] Hours of Service (HOS) of Drivers; Application of American Pyrotechnics Association (APA) for... American Pyrotechnics Association (APA) has applied for a limited exemption from FMCSA's regulation that... exemption would apply solely to the operation of CMVs by 9 designated APA-member motor carriers in...

76 FR 37876 - Hours of Service (HOS) of Drivers; Renewal of American Pyrotechnics Association (APA) Exemption...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-28

...-28043] Hours of Service (HOS) of Drivers; Renewal of American Pyrotechnics Association (APA) Exemption... announces the renewal of the exemption of specified members of the American Pyrotechnics Association (APA... of this exemption in effect, designated APA-member motor carriers will maintain a level of safety...

Effects of a Driver Enforcement Program on Yielding to Pedestrians

ERIC Educational Resources Information Center

Van Houten, Ron; Malenfant, J. E. Louis

2004-01-01

A driver-yielding enforcement program that included decoy pedestrians, feedback flyers, written and verbal warnings, and saturation enforcement for a 2-week period was evaluated in the city of Miami Beach using a multiple baseline design. During baseline, data were collected at crosswalks along two major corridors. Treatment was introduced first…

Parent-Teen Training Aide = Guia de Instruccion para Padres y Jovenes.

ERIC Educational Resources Information Center

California State Dept. of Motor Vehicles, Sacramento.

This handbook is designed to guide California parents in helping their teenagers practice the driving skills required to obtain a driver license. The first section includes information on the following topics: meeting California driver training and licensing requirements, understanding the parent's role as the driving instructor's aide, using the…

Drivers of Change in Construction Training: How Significant Is the Sustainability Agenda?

ERIC Educational Resources Information Center

Fien, John; Winfree, Tomi

2014-01-01

The construction industry is contributing to the sustainability agenda through numerous strategies to improve energy efficiency in the design, materials, and operating conditions of buildings. However, this is only one driver of change in the construction sector. This article, which takes Australia as a case study, shows that many other drivers…

Drivers and Barriers to Adopting Gamification: Teachers' Perspectives

ERIC Educational Resources Information Center

Sánchez-Mena, Antonio; Martí-Parreño, José

2017-01-01

Gamification is the use of game design elements in non-game contexts and it is gaining momentum in a wide range of areas including education. Despite increasing academic research exploring the use of gamification in education little is known about teachers' main drivers and barriers to using gamification in their courses. Using a phenomenology…

Michael Driver: A Career Life to Remember

ERIC Educational Resources Information Center

Sundby, Dianne; Derr, C. Brooklyn

2007-01-01

Purpose: The purpose of this paper is to present a retrospective of the career life of Michael Driver, from the time of his Princeton graduate studies and early faculty years at Purdue University through the over three decades he spent at USC. Design/methodology/approach: The history and development of his theoretical and research interests are…

What Are Drivers for Informal Learning?

ERIC Educational Resources Information Center

Schürmann, Eva; Beausaert, Simon

2016-01-01

Purpose: The topic of informal learning at work has received increasing attention in the past years. The purpose of this study is to explore in which informal learning activities employees engage and what are the drivers for informal learning. Design/Methodology/Approach: Semi-structured interviews were taken from ten human resources (HR) and ten…

Cooperative Driver Education and Safety Training. Instructor's Guide.

ERIC Educational Resources Information Center

Seyfarth, John T.; And Others

The program, designed to give the driver-training pupil a semester of 50 hours of instruction, involves four instructional phases, one of them optional to give flexibility to fit the varying needs of different school systems: Phase 1--the classroom phase, with 30 instructional hours devoted to 30 specific events, staggered at each school…

Statistical Models for Predicting Automobile Driving Postures for Men and Women Including Effects of Age.

PubMed

Park, Jangwoon; Ebert, Sheila M; Reed, Matthew P; Hallman, Jason J

2016-03-01

Previously published statistical models of driving posture have been effective for vehicle design but have not taken into account the effects of age. The present study developed new statistical models for predicting driving posture. Driving postures of 90 U.S. drivers with a wide range of age and body size were measured in laboratory mockup in nine package conditions. Posture-prediction models for female and male drivers were separately developed by employing a stepwise regression technique using age, body dimensions, vehicle package conditions, and two-way interactions, among other variables. Driving posture was significantly associated with age, and the effects of other variables depended on age. A set of posture-prediction models is presented for women and men. The results are compared with a previously developed model. The present study is the first study of driver posture to include a large cohort of older drivers and the first to report a significant effect of age. The posture-prediction models can be used to position computational human models or crash-test dummies for vehicle design and assessment. © 2015, Human Factors and Ergonomics Society.