78 FR 63568 - Proposed Collection; Comment Request for Rev. Proc. 2007-35

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-24

... Revenue Procedure 2007-35, Statistical Sampling for purposes of Section 199. DATES: Written comments... . SUPPLEMENTARY INFORMATION: Title: Statistical Sampling for purposes of Section 199. OMB Number: 1545-2072... statistical sampling may be used in purposes of section 199, which provides a deduction for income...

A Network Optimization Solution using SAS/OR Tools for the Department of the Army Branching Problem

DTIC Science & Technology

2010-02-18

OPTMODEL; NETFLOW ;Nodes;Arcs;ROTC; assignments;Basic Branches;Cadet Satisfaction; CLASSIFICATION: Unclassified This paper will demonstrate...implement a solution using the NETFLOW procedure and repeat that network solution using the OPTMODEL procedure. The OPTMODEL implementation will be...96.545599 M 1 AV AV IN EN FA AR 4 96.221521 M 1 IN IN MI EN MP AR 1 Figure 1, Supply: cadet data (5 of 2545) ordered by OMS PROC NETFLOW takes a

Carbon nanoparticle doped micro-patternable nano-composites for wearable sensing applications (Conference Presentation)

NASA Astrophysics Data System (ADS)

Khosla, Ajit

2017-04-01

This talk focuses on preparation, characterization and micropatterning of electrically conducting KETJENBLACK carbon black nanoparticle (80 nm-diameter) doped Polydimethylsiloxane (PDMS) by employing extrusion mixing. Previously, we had reported fabrication of various micropatternable nanocomposites for wearable sensing applications vis solvent assisted ultrasonic mixing technique[1-16] . Extrusion mixing has an advantage as no organic solvents are used and homogenous dispersion of carbon nanoparticles is observed, which is confirmed by SEM analysis. The developed nanocomposite can be micropatterened using standard microfabrication techniques. It is also observed that percolation threshold occurs at 0.51 wt% of carbon nanoparticles in polymer matrix. Examples of developed nano-composites for wearable sensing applications for precision medicine will also be discussed. References: 1.http://summit.sfu.ca/item/12017 A. Khosla. Micropatternable multifunctional nanocomposite polymers for flexible soft MEMS applications. Diss. Applied Science: School of Engineering Science, 2011. 2. A. Khosla ; B. L. Gray; Fabrication of multiwalled carbon nanotube polydimethylsiloxne nanocomposite polymer flexible microelectrodes for microfluidics and MEMS. Proc. SPIE 7642, Electroactive Polymer Actuators and Devices (EAPAD) 2010, 76421V (April 09, 2010); doi:10.1117/12.847292. 3. Ang Li ; Ajit Khosla ; Connie Drewbrook ; Bonnie L. Gray; Fabrication and testing of thermally responsive hydrogel-based actuators using polymer heater elements for flexible microvalves. Proc. SPIE 7929, Microfluidics, BioMEMS, and Medical Microsystems IX, 79290G (February 14, 2011); doi:10.1117/12.873197. 4. Khosla, A. and Gray, B. L. (2010), Preparation, Micro-Patterning and Electrical Characterization of Functionalized Carbon-Nanotube Polydimethylsiloxane Nanocomposite Polymer. Macromol. Symp., 297: 210-218. doi:10.1002/masy.200900165 5. A. Khosla ; D. Hilbich ; C. Drewbrook ; D. Chung ; B. L. Gray; Large scale micropatterning of multi-walled carbon nanotube/polydimethylsiloxane nanocomposite polymer on highly flexible 12×24 inch substrates. Proc. SPIE 7926, Micromachining and Microfabrication Process Technology XVI, 79260L (February 15, 2011); doi:10.1117/12.876738. 6. A. Khosla, and Bonnie L. Gray. "(Invited) Micropatternable Multifunctional Nanocomposite Polymers for Flexible Soft NEMS and MEMS Applications." ECS Transactions 45.3 (2012): 477-494. doi: 10.1149/1.3700913 7. Khosla, Ajit. "Nanoparticle-doped electrically-conducting polymers for flexible nano-micro Systems." Electrochemical Society Interface 21.3-4 (2012): 67-70. 8. Ajit Khosla; Smart garments in chronic disease management: progress and challenges. Proc. SPIE 8548, Nanosystems in Engineering and Medicine, 85482O (October 24, 2012); doi:10.1117/12.979667. 9. D. Chung ; A. Khosla ; B. L. Gray; Screen printable flexible conductive nanocomposite polymer with applications to wearable sensors. Proc. SPIE 9060, Nanosensors, Biosensors, and Info-Tech Sensors and Systems 2014, 90600U (April 16, 2014); doi:10.1117/12.2046548. 10. Daehan Chung ; Sam Seyfollahi ; Ajit Khosla ; Bonnie Gray ; Ash Parameswaran ; Ramani Ramaseshan ; Kirpal Kohli; Initial experiments with flexible conductive electrodes for potential applications in cancer tissue screening. Proc. SPIE 7929, Microfluidics, BioMEMS, and Medical Microsystems IX, 79290Z (February 14, 2011); doi:10.1117/12.875563. 11. A. Khosla ; B. L. Gray; New technologies for large-scale micropatterning of functional nanocomposite polymers. Proc. SPIE 8344, Nanosensors, Biosensors, and Info-Tech Sensors and Systems 2012, 83440W (April 26, 2012); doi:10.1117/12.915178. 12. A. Khosla, B.L. Gray, Preparation, characterization and micromolding of multi-walled carbon nanotube polydimethylsiloxane conducting nanocomposite polymer, Materials Letters, Volume 63, Issues 13-14, 31 May 2009, Pages 1203-1206, ISSN 0167-577X, http://dx.doi.org/10.1016/j.matlet.2009.02.043. 13. Giassa, M., Khosla, A., Gray, B. et al. J Electron Test (2010) 26: 139. doi:10.1007/s10836-009-5125-3 14.Ozhikandathil, Jayan, Ajit Khosla, and Muthukumaran Packirisamy. "Electrically Conducting PDMS Nanocomposite Using In Situ Reduction of Gold Nanostructures and Mechanical Stimulation of Carbon Nanotubes and Silver Nanoparticles." ECS Journal of Solid State Science and Technology 4.10 (2015): S3048-S3052. doi:10.1149/2.0091510jss 15. Kassegne, Sam, Maria Vomero, Roberto Gavuglio, Mieko Hirabayashi, Emre Özyilmaz, Sebastien Nguyen, Jesus Rodriguez, Eda Özyilmaz, Pieter van Niekerk, and Ajit Khosla. "Electrical impedance, electrochemistry, mechanical stiffness, and hardness tunability in glassy carbon MEMS μECoG electrodes." Microelectronic Engineering 133 (2015): 36-44. 16. A. Khosla ; B. L. Gray; Fabrication and properties of conductive micromoldable thermosetting polymer for electronic routing in highly flexible microfluidic systems. Proc. SPIE 7593, Microfluidics, BioMEMS, and Medical Microsystems VIII, 759314 (February 17, 2010); doi:10.1117/12.840911.

Development of a Toxin Knowledge System

DTIC Science & Technology

1990-11-12

HYPERTENSIVE 1379, 1977 YUCATAN MINIATURE SWINE, PROC SOC EXP BIOL MED 178:591-598,1985 (1329) Campbell RL, Bomeyer BE, Yam J: EFFECTS OF MIXED...BF, I-bu I-C_ DEOXYCORTICOSTERONE ACETATEHYPERTENSIVE IN VITRO BINDING OF AFLATOXIN BI AND 2- YUCATAN MINIATURE SWINE. CAN J PI-YSIOL PHARMACOL...Hamilton RMG,Trenholm HL- OBSERVATIONSCN (465) Hear LP, Graseltn WE JR,, Stebbins TC. PRODUC- THE CHEMICAL AND NUTRITIVE CONTENT OF WHITE WIN- lION OF

New stability conditions for mixed linear Levin-Nohel integro-differential equations

NASA Astrophysics Data System (ADS)

Dung, Nguyen Tien

2013-08-01

For the mixed Levin-Nohel integro-differential equation, we obtain new necessary and sufficient conditions of asymptotic stability. These results improve those obtained by Becker and Burton ["Stability, fixed points and inverse of delays," Proc. - R. Soc. Edinburgh, Sect. A 136, 245-275 (2006)], 10.1017/S0308210500004546 and Jin and Luo ["Stability of an integro-differential equation," Comput. Math. Appl. 57(7), 1080-1088 (2009)], 10.1016/j.camwa.2009.01.006 when b(t) = 0 and supplement the 3/2-stability theorem when a(t, s) = 0. In addition, the case of the equations with several delays is discussed as well.

System Synthesis for Polymorphous Computing Architectures

DTIC Science & Technology

2002-02-01

G H F Proc 5 : 4 : 3 11 1 Figure 3. Self-timed execution. D C B F G H E D B H EA CG F D C B F G H E D B H EA CG F AProc 1 Proc 2...first-iteration actors denoted by T. D B H E CG F D C B F G H E D B H EA CG F A 18 T T T T Proc 3 Proc 4 Proc 5 Proc 1 Proc 2 1 T⁄ T trmin30 ture-mirror...Phase1Algo( , ) = transientReduction( ) Output T G S′ S G T S′ S S′ Figure 11. Pseudocode to find

Research Directions in Database Security, II

DTIC Science & Technology

1990-11-01

WILLIAMS Burke Ct 286 WOLCOTT 9th Rd 795 WOOD 25th St 520 YANCEY Motley St 398 ZUZACK Arden Rd LDV> : The style of the prototype is such that the...WOLCOTT Fin Clk YANCEY Dept Mgr ZUZACK Proc Anal LDV> ;RR3: S (sortrel (project (njoin (project employee-base ’(Department Employee-Name Employee-Num...Proc Anal PROC MAHONEY Secy PROC YANCEY Dept Mgr PROC ZUZACK Proc Anal SEC BRIMER DMSO SEC FALBO Secy SEC HILL Dept Mgr SEC MITCHELL Ast DBSO SEC THOMAS

Comparison of a novel distillation method versus a traditional distillation method in a model gin system using liquid/liquid extraction.

PubMed

Greer, Derek; Pfahl, Les; Rieck, Jim; Daniels, Tim; Garza, Oscar

2008-10-08

This research studied a novel form of distillation (high vacuum distillation) as a method for preserving volatile aroma chemicals important to the organoleptic attributes of a four botanical model gin as well as the degradation products generated during the heating required in traditional methods of gin distillation. A 2 (5) factorial experiment was conducted in a partially confounded incomplete block design and analyzed using the PROC MIXED procedure from SAS. A model gin was made of dried juniper berries (Juniperus communis), coriander seed (Coriandrum sativum), angelica root (Angelica archangelica), and dry lemon peel (Citrus limonum). This was distilled on a traditional still utilizing atmospheric pressure and a heating mantel to initiate phase separation as well as a novel still (high vacuum) utilizing high vacuum pressures below 0.1 mmHg and temperatures below -15 degrees C to initiate phase separation. The degradation products (alpha-pinene, alpha-phellandrene, E-caryophyllene, and beta-myrcene) were present at greater levels (approximately 10 times) in the traditional still-made gin as compared to the novel gin.

Estimation and Mapping of Clouds and Rainfall Areas with an Interactive Computer.

DTIC Science & Technology

1982-12-01

test. C . TEST PROCEDURES The following lis1t is the set of procedures for this test of the SPADS Cloud Model. The steps taken were to: 1. Capture...12, 1640-1648. 121 0 APPENDIX4 SPADS CLOUD MlDEL COMPUTER PROGrRArt C CLOY) -IS DRIVER/IMAIN PROGRAIM C T41S PROC.RAM ANALYZES VIS AND IR. TOGETHEI TO...NITH AN INTERACTIVE COMPUTER(U) NAYAL POSTGRADUATE SCHOOL MONTEREY CA C A NELSON DEC 92 UNLSSIFIED F/G 9/2 NUC MENOMONE NONI smhhhhhhhhohh

Noise, fluctuation, and HADAMARD-transform spectrometry

NASA Astrophysics Data System (ADS)

Nitzsche, Guenter; Riesenberg, Rainer

2003-05-01

The HADAMARD principle is known in optics as a multiplex technique. It describes the mode with the most advantageous increase of the signal-to-noise ratio (SNR) in terms of scanning (Fellget advantage). The maximum increase of SNR, we call it gain, is (n+1)/(2On), where n is the number of multiplexing. It is valid in the case of pure detector noise. The multiplex encoding Hadamard pattern in case of n = 7 is 1110100, whereby 1 stands for a switched on channel performed by a field selector. The signals of all (switched on) channels are detected by a single detector. n measurement steps with a cyclic change of the pattern is necessary to perform the Hadamard transformation and to get the result of each individual channel. In case of n = 7 the theoretical gain is 1.51. For all possible multiplex pattern (1100000, 1110000 and so on) the gain is theoretically investigated. A multiplexing advantage (gain > 1) is reached only by the Hadamard pattern, the inverse Hadamard pattern and for (0111111)-pattern (gain=1.08). Most of the multiplex pattern are disadvantageous. The reason for maximum gain of the HADAMARD transformation is analysed theoretically. Signal fluctuations during the measurement caused by fluctuations of the illumination or by the object under test, reduce the multiplex gain, too. So the limits for realizing a gain are estimated theoretically. Essential is the transformation procedure and its influence on the error propagation. The results could be verified by experiments with array spectrometeres. Requirements are derived by numerical simulation concerning the stability of the signals to be multiplexed. It is simulated the needed stability of the signals with increasing order of multiplexing. So the increase of the multiplex gain is limited by signal fluctuations. A realized 96 channel spectral reader is presented as a modern application of an optical multiplexing arrangement. ! M. Harvid, N. J. A. Sloane, Hadamard Transform Optics, Academic Press, 1979 ! R.A. De Verse, R.M. Hammaker, W. G. Fately, J.A.Graham, J.D.Tate, "Spectrometry and imaging using a digital micromirror array" American Laboratory, Vol. 30, 21, pp. 112-120, 1998 ! R. Riesenberg, A. Wuttig, B. Harnisch, "Optical MEMS Technology for Multiplexing in High-End Micro-Scpectrometers", Proc. SPIE 4928, 6-14, 2002 ! A. Wuttig, R. Riesenberg, "Hyperspectral imager with a facile MEMS", Proc. SPIE 4881A, 2002, to be published ! R. Riesenberg, G. Nitzsche, W. Voigt, 'HADAMARD Encoding and other optical Multiplexing', VDI-Berichte 1694, pp. 345-350, 2002 ! A. Wuttig, R. Riesenberg, G. Nitzsche, "Subpixel Analysis of Double Array Grating Spectrometer", Proc. SPIE 4480, pp. 334-344, 2002 ! A. Wuttig, R. Riesenberg, G. Nitzsche, "Integral Field and Multi Object Spectrometry with MEMS", Proc. SPIE 4480, pp. 367-376, 2002 ! R. Riesenberg, G. Nitzsche, A. Wuttig, B. Harnisch, "Micro Spectrometer and MEMS for Space" in "Smaller Satellites: Bigger Business?", edited by M. Rycroft, N. Crosby, Kluwer Academic Publisher, pp. 403-406, 2002 ! R. Riesenberg, A. Wuttig, "Optical sensors with MEMS, slit masks and micromechanical devices", Proc. SPIE 4561, pp. 315-322, 2001 ! R. Riesenberg, "MicroMechanical Slit Positioning System as a transmissive spatial Light Modulator", Proc. SPIE 4457, pp.197-203, 2001 ! R. Riesenberg, J. Lonschinski, "HADAMARD-Minispectrometer made by a Micro Device", Proc. "3rd Round Table on Micro/NanoTechnologies for Space", ESTEC, Noordwijk, The Netherlands, pp. 291 - 297, 2000 ! R. Riesenberg, U. Dillner, "HADAMARD Imaging Spectrometers", Proc. SPIE 3753, pp. 203-213, 1999 ! R. Riesenberg, Th. Seifert, "Design of spatial Light Modulator Microdevices - Micro Slit Arrays", Proc. SPIE 3680, Part One, pp. 406-414, 1999 ! R. Riesenberg, W. Voigt, J. Schoneich, "Compact Spectrometers made by Micro System Technology", Sensor 97, Proc. Vol. 2, pp. 145-150,1997

75 FR 69741 - Proposed Collection; Comment Request for Rev. Proc. 2007-99 (RP-127367-07), 9100 Relief Under...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-15

.... Proc. 2007-99 (RP- 127367-07), 9100 Relief Under Sections 897 and 1445 AGENCY: Internal Revenue Service...)). Currently, the IRS is soliciting comments concerning Rev. Proc. 2007-99 (RP-127367-07), 9100 Relief Under...: Rev. Proc. 2007-99 (RP-127367-07), 9100 Relief Under Sections 897 and 1445. OMB Number: 1545-2098...

Blended learning with Moodle in medical statistics: an assessment of knowledge, attitudes and practices relating to e-learning.

PubMed

Luo, Li; Cheng, Xiaohua; Wang, Shiyuan; Zhang, Junxue; Zhu, Wenbo; Yang, Jiaying; Liu, Pei

2017-09-19

Blended learning that combines a modular object-oriented dynamic learning environment (Moodle) with face-to-face teaching was applied to a medical statistics course to improve learning outcomes and evaluate the impact factors of students' knowledge, attitudes and practices (KAP) relating to e-learning. The same real-name questionnaire was administered before and after the intervention. The summed scores of every part (knowledge, attitude and practice) were calculated using the entropy method. A mixed linear model was fitted using the SAS PROC MIXED procedure to analyse the impact factors of KAP. Educational reform, self-perceived character, registered permanent residence and hours spent online per day were significant impact factors of e-learning knowledge. Introversion and middle type respondents' average scores were higher than those of extroversion type respondents. Regarding e-learning attitudes, educational reform, community number, Internet age and hours spent online per day had a significant impact. Specifically, participants whose Internet age was no greater than 6 years scored 7.00 points lower than those whose Internet age was greater than 10 years. Regarding e-learning behaviour, educational reform and parents' literacy had a significant impact, as the average score increased 10.05 points (P < 0.0001). This educational reform that combined Moodle with a traditional class achieved good results in terms of students' e-learning KAP. Additionally, this type of blended course can be implemented in many other curriculums.

A Procedural Guide on Sick Building Syndrome.

DTIC Science & Technology

1987-03-01

membrane irrition. Sodium dodecyl sulfate , an ingredient in many carpet shampoos has also been associated with mucous membrane irritation in certain offices...American Industrial Hygiene Conference, 20 May 1986 13. Kreiss, K, and M.G. Gonzales, et al, "Respiratory Irritation Due to Carpet Shampoo ," Chronic...Carpet Shampoo ," Proc. Fifth Inter. Symp. Medichem, San Francisco, p. 347 (1977) 12 15. Threshold Limit Values and Biological Exposure Indices for 1985

PSHREG: A SAS macro for proportional and nonproportional subdistribution hazards regression

PubMed Central

Kohl, Maria; Plischke, Max; Leffondré, Karen; Heinze, Georg

2015-01-01

We present a new SAS macro %pshreg that can be used to fit a proportional subdistribution hazards model for survival data subject to competing risks. Our macro first modifies the input data set appropriately and then applies SAS's standard Cox regression procedure, PROC PHREG, using weights and counting-process style of specifying survival times to the modified data set. The modified data set can also be used to estimate cumulative incidence curves for the event of interest. The application of PROC PHREG has several advantages, e.g., it directly enables the user to apply the Firth correction, which has been proposed as a solution to the problem of undefined (infinite) maximum likelihood estimates in Cox regression, frequently encountered in small sample analyses. Deviation from proportional subdistribution hazards can be detected by both inspecting Schoenfeld-type residuals and testing correlation of these residuals with time, or by including interactions of covariates with functions of time. We illustrate application of these extended methods for competing risk regression using our macro, which is freely available at: http://cemsiis.meduniwien.ac.at/en/kb/science-research/software/statistical-software/pshreg, by means of analysis of a real chronic kidney disease study. We discuss differences in features and capabilities of %pshreg and the recent (January 2014) SAS PROC PHREG implementation of proportional subdistribution hazards modelling. PMID:25572709

Performance Analysis of Polymorphous Computing Architectures

DTIC Science & Technology

2001-01-01

G H F Proc 5 : 4 : 3 11 1 Figure 3. Self-timed execution. D C B F G H E D B H EA CG...F D C B F G H E D B H EA CG F AProc 1 Proc 2 Proc 3 Proc 4 Proc 5 185 cution pattern when the application graph in Figure 2 is executed in a self...transform, a quadra- E Figure 10. Self-timed execution with first-iteration actors denoted by T. D B H E CG F D C B F G H E D B H EA CG F A 18 T T T

Calibration and Compensation of Instrumental Errors in Imaging Polarimeters

DTIC Science & Technology

2007-04-01

procedures for polarimeters 3. Examine impact of focal plane nonuniformity on polarimeters 4. Understand the role of bandwidth in broadband polarimetry. 5... nonuniformity (NU) noise. NU noise is a results from pixel-to-pixel variations in the photodetector response. NU noise is a persistent problem for all... nonuniformity noise in imaging polarimeters," Proc SPIE Vol. 5888: Polarization Science and Remote Sensing 11, pp. 58880J 1 - 10, J. A. Shaw and J. S

Propellant Nonlinear Constitutive Theory Extension: Preliminary Results.

DTIC Science & Technology

1983-08-01

Farris, R. J., Hermann , L. R., Hutchinson, J. R., and Schapery, R. A., "Development of a Solid Rocket Propellant Nonlinear Viscoelastic Constitu- tive...Publication 331, Dec. 1980. pp. 127- 133. 27. Mullins, L., "Softening of Rubber by Deformation," Rubber Chem. Technol., 1969, Vol. 31, pp. 333-362. 28. Oberth ...June 1973. 30. Hermann , L. R., and Peterson, F. E., "A Numerical Procedure for Viscoelastic Stress Analysis," Proc. 7th Mtg. of ICRPG Mech. Beh

Lift-Off Performance in Flexure Pivot Pad and Hybrid Bearings

DTIC Science & Technology

2008-12-01

and Dawson, M. P., 1998, "Experience in the Use of Flexure Pivot Tilt Pad Bearings in Boiler Feed Water Pumps ," Proc. of the 15th International...freely. Test Procedure 1) Turn on the pump to buffer water to the test bearing. 2) Turn on air to the air seal that prevents water flowing... Pump Users Symposium, Turbomachinery Laboratory, College Station, Texas, pp. 77-84. [6] Rodriguez, L., 2004, “Experimental Frequency-Dependent

Trauma Induced Pain and Wound Management in Emergency Environment by Low Energy Photonic Therapy

DTIC Science & Technology

2004-09-01

Technology and Emergency Medical Procedures”, held in St. Pete Beach, USA, 16-18 August 2004, and published in RTO-MP-HFM-109. Report Documentation Page...Casualty Care in Ground-Based Tactical Situations: Trauma Technology and Emergency Medical Procedures (Soins aux blessés au combat dans des situations...tactiques : technologies des traumas et procédures médicales durgence)., The original document contains color images. 14. ABSTRACT 15. SUBJECT TERMS 16

Decaffeinated coffee improves insulin sensitivity in healthy men.

PubMed

Reis, Caio E G; Paiva, Cicília L R Dos S; Amato, Angélica A; Lofrano-Porto, Adriana; Wassell, Sara; Bluck, Leslie J C; Dórea, José G; da Costa, Teresa H M

2018-05-01

Epidemiological studies have found coffee consumption is associated with a lower risk for type 2 diabetes mellitus, but the underlying mechanisms remain unclear. Thus, the aim of this randomised, cross-over single-blind study was to investigate the effects of regular coffee, regular coffee with sugar and decaffeinated coffee consumption on glucose metabolism and incretin hormones. Seventeen healthy men participated in five trials each, during which they consumed coffee (decaffeinated, regular (containing caffeine) or regular with sugar) or water (with or without sugar). After 1 h of each intervention, they received an oral glucose tolerance test with one intravenous dose of [1-13C]glucose. The Oral Dose Intravenous Label Experiment was applied and glucose and insulin levels were interpreted using a stable isotope two-compartment minimal model. A mixed-model procedure (PROC MIXED), with subject as random effect and time as repeated measure, was used to compare the effects of the beverages on glucose metabolism and incretin parameters (glucose-dependent insulinotropic peptide (GIP)) and glucagon-like peptide-1 (GLP-1)). Insulin sensitivity was higher with decaffeinated coffee than with water (P<0·05). Regular coffee with sugar did not significantly affect glucose, insulin, C-peptide and incretin hormones, compared with water with sugar. Glucose, insulin, C-peptide, GLP-1 and GIP levels were not statistically different after regular and decaffeinated coffee compared with water. Our findings demonstrated that the consumption of decaffeinated coffee improves insulin sensitivity without changing incretin hormones levels. There was no short-term adverse effect on glucose homoeostasis, after an oral glucose challenge, attributable to the consumption of regular coffee with sugar.

Continued Development and Implementation of the Universal Network Interface Device (UNID) II in the Digital Engineering Laboratory Network (DELNET). Volume 2.

DTIC Science & Technology

1984-12-01

PACKET LO-ATED IN TABLE LCNTTB. INPUT < THE INDUT IS A TWO CHARACTER ASCII VALUE INDICATING THE TABLE REQUIRING EVALUATION . > PROCESSING THIS PROCEDURE...INTO OHANYE A (2). I NPUT THE INPUT IS AN INTEGER VA UE INDICATING’ THE TAlN’LE LOCATI’ OF THE FRAmE TO BE EVALUATED . PROC--SSING THIS PROCEDURE LOU-S AT...GOOD AEXICdLFCL ~N IS NuT rC:L I VED LY THE END OF THE WAIT PER ICOH, I r I S fx>Sit-..) ACAI N UPION IriL NE.XT CflLL THRJOH THIS IRROCEDURE. A [ RAMC OF

Precision Measurement and Calibration. Volume 1. Statistical Concepts and Procedures

DTIC Science & Technology

1969-02-01

due to growth measure of the loss of radium D and polonium - 210 of polonium - 210 in A. B, and D, on the one hand, in the transfer of June 1930. and in C...tracting the contributions of polonium - 210 and tion to Washington, D. C., of these standards; to nuclear recoils and of radium E from the energy W...event, the balance for the absolute measurement of radiation.w a n rwith applications to radium and its emanation, Proc. polonium - 210 correction will

A Price To Pay for Relaxed Substrate Specificity: A Comparative Kinetic Analysis of the Class II Lanthipeptide Synthetases ProcM and HalM2

PubMed Central

2015-01-01

Lanthipeptides are a class of ribosomally synthesized and posttranslationally modified peptide natural products (RiPPs) that typically harbor multiple intramolecular thioether linkages. For class II lanthipeptides, these cross-links are installed in a multistep reaction pathway by a single enzyme (LanM). The multifunctional nature of LanMs and the manipulability of their genetically encoded peptide substrates (LanAs) make LanM/LanA systems promising targets for the engineering of new antibacterial compounds. Here, we report the development of a semiquantitative mass spectrometry-based assay for kinetic characterization of LanM-catalyzed reactions. The assay was used to conduct a comparative kinetic analysis of two LanM enzymes (HalM2 and ProcM) that exhibit drastically different substrate selectivity. Numerical simulation of the kinetic data was used to develop models for the multistep HalM2- and ProcM-catalyzed reactions. These models illustrate that HalM2 and ProcM have markedly different catalytic efficiencies for the various reactions they catalyze. HalM2, which is responsible for the biosynthesis of a single compound (the Halβ subunit of the lantibiotic haloduracin), catalyzes reactions with higher catalytic efficiency than ProcM, which modifies 29 different ProcA precursor peptides during prochlorosin biosynthesis. In particular, the rates of thioether ring formation are drastically reduced in ProcM, likely because this enzyme is charged with installing a variety of lanthipeptide ring architectures in its prochlorosin products. Thus, ProcM appears to pay a kinetic price for its relaxed substrate specificity. In addition, our kinetic models suggest that conformational sampling of the LanM/LanA Michaelis complex could play an important role in the kinetics of LanA maturation. PMID:25409537

Development and Validation of a Standardized Tool for Prioritization of Information Sources.

PubMed

Akwar, Holy; Kloeze, Harold; Mukhi, Shamir

2016-01-01

To validate the utility and effectiveness of a standardized tool for prioritization of information sources for early detection of diseases. The tool was developed with input from diverse public health experts garnered through survey. Ten raters used the tool to evaluate ten information sources and reliability among raters was computed. The Proc mixed procedure with random effect statement and SAS Macros were used to compute multiple raters' Fleiss Kappa agreement and Kendall's Coefficient of Concordance. Ten disparate information sources evaluated obtained the following composite scores: ProMed 91%; WAHID 90%; Eurosurv 87%; MediSys 85%; SciDaily 84%; EurekAl 83%; CSHB 78%; GermTrax 75%; Google 74%; and CBC 70%. A Fleiss Kappa agreement of 50.7% was obtained for ten information sources and 72.5% for a sub-set of five sources rated, which is substantial agreement validating the utility and effectiveness of the tool. This study validated the utility and effectiveness of a standardized criteria tool developed to prioritize information sources. The new tool was used to identify five information sources suited for use by the KIWI system in the CEZD-IIR project to improve surveillance of infectious diseases. The tool can be generalized to situations when prioritization of numerous information sources is necessary.

An Implementation in Pascal: Translation of Prolog into Pascal.

DTIC Science & Technology

1985-06-01

for i:=1 to px do begin ifr (proc .i..relativity=O) then continue; if proc .. ) .ptype=6) hen continue;if (proc (...abegin<>O) then continue; passname...forj:=reitorn do if (j0) then continue; if (par (.>) ppe <>1) then continue; if (par .. .namie<>par(.i.).name) parle nO ype:par C.’ ntype; par Inblnd

Possiblités de mesure quantitative avec un appareillage de réflectométrie X utilisant le mode angulaire dispersif

NASA Astrophysics Data System (ADS)

Chihab, J.; Naudon, A.

1992-12-01

A normalization procedure for reflectivity curves obtained with a new apparatus using the angle-resolved dispersive mode (J. Appl. Cryst., 1989) is described here. Simulation of spectra with the optical theory of X-rays is then possible. It allows to determine with a good accuracy the density, thickness and interfacial rugosities of layers when their thicknesses are less than about 200 nm. In order to check the normalization procedure a bulk silicon sample and a layer of evaporated nickel are analysed. Dans cet article nous présentons une procédure pour la normalisation des courbes de réflectivité obtenues par un nouvel appareillage de réflectométrie X utilisant le mode angulaire dispersif (J. Appl. Cryst., 1989). La simulation de ces courbes, dans le cadre de la théorie optique, devient alors possible. Pour les dépôts d'épaisseur inférieure à environ 200 nm, elle permet de déterminer précisément l'épaisseur, les rugosités interfaciales et la compacité. Afin de vérifier la validité de notre procédure de normalisation, nous analysons à titre d'exemples le cas d'un échantillon massif de silicium, et celui d'une couche mince de nickel évaporée sur un support en silicium.

Imaging of Stellar Surfaces with the Navy Precision Optical Interferometer

DTIC Science & Technology

2015-09-18

geostationary satel- lite with the Navy Prototype Optical Interferome- ter,” in Proc. Optical and Infrared Interferometry II, W. C. Danchi, F...Cormier, “Imag- ing of geostationary satellites with the MRO inter- ferometer,” in Proc. Advanced Maui Optical and Space Surveillance Technologies... geostationary satellites: Signal-to-noise considerations,” in Proc. Advanced Maui Optical and Space Surveillance Technologies Conference, 2011. 6. D

Databases in Healthcare.

DTIC Science & Technology

1980-03-01

34; Proc. ACM Pacific 75 Conference, Boole and Babbage , Palo Alto, CA., 1975. Giebin75 Giebink, G.A., et al: "Current Status of Ambulatory Health Care...13, pp. 36-49, 1978. Stimso78 Stimson, D.H. and G. Charles : "A Computer-Based Information System in an Ambulatory Care System and Case Study" Proc...Base Management Systems" Proc. ACM Pacific 75 Conference, Boole and Babbage , Palo Alto, CA, 1975. Szolov78 Szolovits, P. and S.G. Pauker: "Categorical

Department of Defense Congressional Action on FY 1984 Authorization Request.

DTIC Science & Technology

1983-10-11

AUTHORIZATION NOTE: The Military Construction Bill authorization recommendation totaIS dIO not include projects authorized using savings or authorized for...change from the request). &DE9rooi)00 ti M S in Million (Zallocki- Proc. of Ammunition. Armsy Nerve gas artillery shells .185 Bethune) Proc. of...Ammunitioin. Army Nerve gas production -96S (Gore) Missile Proc, Air Force MX Production funds -357 8 (Byron) ROTE, Air Force T-46A Trainer Aircraft . 200

3 CFR 102.171-102.999 - [Reserved

Code of Federal Regulations, 2012 CFR

2012-01-01

... Childhood Obesity Awareness Month, 2011 55207 8703 Sept. 1 National Ovarian Cancer Awareness Month, 2011...)Child Health Day (Proc. 8729)Childhood Cancer Awareness Month, National (Proc. 8705)Childhood Obesity...

3 CFR 102.171-102.999 - [Reserved

Code of Federal Regulations, 2013 CFR

2013-01-01

... Month, 2012 55091 8852 Aug. 31 National Childhood Obesity Awareness Month, 2012 55093 8853 Aug. 31...)Child Health Day (Proc. 8880)Childhood Cancer Awareness Month, National (Proc. 8851)Childhood Obesity...

3 CFR 102.171-102.999 - [Reserved

Code of Federal Regulations, 2014 CFR

2014-01-01

..., 2013 54737 9007 Aug. 30 National Childhood Obesity Awareness Month, 2013 54739 9008 Aug. 30 National... Health Day (Proc. 9036)Childhood Cancer Awareness Month, National (Proc. 9006)Childhood Obesity Awareness...

Coilable Crystalline Fiber (CCF) Lasers and their Scalability

DTIC Science & Technology

2014-03-01

Fibers: Double-Clad Design Concept of Tm:YAG-Core Fiber and Mode Simulation. Proc. SPIE 2012, 8237 , 82373M. 8. Beach, R. J.; Mitchell, S. C...Dubinskii, M. True Crystalline Fibers: Double-Clad LMA Design Concept of Tm:YAG-Core Fiber and Mode Simulation. Proc. of SPIE 2012, 8237 , 82373M-1...Tm:YAG-Core Fiber and Mode Simulation. Proc. SPIE 8237 , 82373M, 2012. 8. Beach, R. J.; Mitchell, S. C.; Meissner, H. E.; Meissner, O. R.; Krupke, W

pROC: an open-source package for R and S+ to analyze and compare ROC curves.

PubMed

Robin, Xavier; Turck, Natacha; Hainard, Alexandre; Tiberti, Natalia; Lisacek, Frédérique; Sanchez, Jean-Charles; Müller, Markus

2011-03-17

Receiver operating characteristic (ROC) curves are useful tools to evaluate classifiers in biomedical and bioinformatics applications. However, conclusions are often reached through inconsistent use or insufficient statistical analysis. To support researchers in their ROC curves analysis we developed pROC, a package for R and S+ that contains a set of tools displaying, analyzing, smoothing and comparing ROC curves in a user-friendly, object-oriented and flexible interface. With data previously imported into the R or S+ environment, the pROC package builds ROC curves and includes functions for computing confidence intervals, statistical tests for comparing total or partial area under the curve or the operating points of different classifiers, and methods for smoothing ROC curves. Intermediary and final results are visualised in user-friendly interfaces. A case study based on published clinical and biomarker data shows how to perform a typical ROC analysis with pROC. pROC is a package for R and S+ specifically dedicated to ROC analysis. It proposes multiple statistical tests to compare ROC curves, and in particular partial areas under the curve, allowing proper ROC interpretation. pROC is available in two versions: in the R programming language or with a graphical user interface in the S+ statistical software. It is accessible at http://expasy.org/tools/pROC/ under the GNU General Public License. It is also distributed through the CRAN and CSAN public repositories, facilitating its installation.

Probabilistic Reverse dOsimetry Estimating Exposure Distribution (PROcEED)

EPA Pesticide Factsheets

PROcEED is a web-based application used to conduct probabilistic reverse dosimetry calculations.The tool is used for estimating a distribution of exposure concentrations likely to have produced biomarker concentrations measured in a population.

40 CFR 246.201-3 - Recommended procedures: Glass, can, and mixed paper separation.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., and mixed paper separation. 246.201-3 Section 246.201-3 Protection of Environment ENVIRONMENTAL... and Recommended Procedures § 246.201-3 Recommended procedures: Glass, can, and mixed paper separation. In areas where markets are available, it is recommended that glass, cans, and mixed paper be...

40 CFR 246.201-3 - Recommended procedures: Glass, can, and mixed paper separation.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., and mixed paper separation. 246.201-3 Section 246.201-3 Protection of Environment ENVIRONMENTAL... and Recommended Procedures § 246.201-3 Recommended procedures: Glass, can, and mixed paper separation. In areas where markets are available, it is recommended that glass, cans, and mixed paper be...

An enhanced Planetary Radar Operating Centre (PROC)

NASA Astrophysics Data System (ADS)

Catallo, C.

2010-12-01

Planetary exploration by means of radar systems, mainly using GPRs is an important role of Italy and numerous scientific international space programs are carried out jointly with ESA and NASA by Italian Space Agency, the scientific community and the industry. Three experiments under Italian leadership ( designed and manufactured by the Italian industry) provided by ASI within a NASA/ESA/ASI joint venture framework are successfully operating: MARSIS on-board MEX, SHARAD on-board MRO and CASSINI Radar on-board Cassini spacecraft: the missions have been further extended . Three dedicated operational centers, namely SHOC, (Sharad Operating Centre), MOC (Marsis Operating Center) and CASSINI PAD are operating from the missions beginning to support all the scientific communities, institutional customers and experiment teams operation Each center is dedicated to a single instrument management and control, data processing and distribution and even if they had been conceived to operate autonomously and independently one from each other, synergies and overlaps have been envisaged leading to the suggestion of a unified center, the Planetary Radar Processing Center (PROC). In order to harmonize operations either from logistics point of view and from HW/SW capabilities point of view PROC is designed and developed for offering improved functionalities to increase capabilities, mainly in terms of data exchange, comparison, interpretation and exploitation. PROC is, therefore, conceived as the Italian support facility to the scientific community for on-going and future Italian planetary exploration programs, such as Europa-Jupiter System Mission (EJSM) The paper describes how the new PROC is designed and developed, to allow SHOC, MOC and CASSINI PAD to operate as before, and to offer improved functionalities to increase capabilities, mainly in terms of data exchange, comparison, interpretation and exploitation aiding scientists to increase their knowledge in the field of surface radar sounding: furthermore the flexibility and the big dimensions of the PROC archives allow easy integration of other missions (e.g. EJSM). A specific PROC Web facility and a dedicated high capacity on line storage allow PROC missions status and scientific results spreading, scientific requests submission, news, studies, technical information, radar data images publication and data retrieving (the latter only on science team members request), according to different permissions assigned both to science team members and generic users

Misbalance in type III collagen formation/degradation as a novel serological biomarker for penetrating (Montreal B3) Crohn's disease.

PubMed

van Haaften, W T; Mortensen, J H; Karsdal, M A; Bay-Jensen, A C; Dijkstra, G; Olinga, P

2017-07-01

Misbalances in extracellular matrix turnover are key factors in the development of stricturing (Montreal B2) and penetrating (Montreal B3) Crohn's disease. To determine whether serological markers for collagen formation and degradation could serve as biomarkers for complications of Crohn's disease. Serum biomarkers for type I, III, V and VI collagen formation (P1NP, Pro-C3, Pro-C5, Pro-C6) and matrix metalloproteinase mediated degradation (C1M, C3M, C5M and C6M) were measured in a retrospective, single centre cohort of 112 patients with Crohn's disease in the terminal ileum (nonstricturing/nonpenetrating: n=40, stricturing: n=55, penetrating: n=17) and 24 healthy controls. Active inflammation was defined as CRP >5 mg/L. C3M and Pro-C5 levels were higher in penetrating vs nonpenetrating/nonstricturing and stricturing disease (33.6±5 vs 25.8±2.2 [P=.004] and 27.2±2.3 [P=.018] nmol/L C3M, 1262.7±259.4 vs 902.9±109.9 [P=.005] and 953.0±106.4 [P=.015] nmol/L Pro-C5). C1M (71.2±26.1 vs 46.2±6.2 nmol/L [P<.001]), C3M (31.6±3.9 vs 26.1±1.6 nmol/L [P=.002] and Pro-C5 levels (1171.7±171.5 vs 909.6±80.4 nmol/L [P=.002]) were higher in patients with active inflammation vs without active inflammation. Pro-C3/C3M-ratios were best to differentiate between penetrating vs nonstricturing/nonpenetrating and stricturing disease with area under the curves of 0.815±0.109 (P<.001) and 0.746±0.114 (P=.002) respectively. Serological biomarkers show that penetrating Crohn's disease is characterised by increased matrix metalloproteinase-9 degraded type III collagen and formation of type V collagen. Active inflammation in Crohn's disease is characterised by increased formation of type V collagen and increased matrix metalloproteinase mediated breakdown of type I, III collagen. Pro-C3/C3M ratios are superior in differentiating between penetrating Crohn's disease vs inflammatory and stricturing Crohn's disease. © 2017 The Authors. Alimentary Pharmacology and Therapeutics published by John Wiley & Sons Ltd.

40 CFR 246.201-3 - Recommended procedures: Glass, can, and mixed paper separation.

Code of Federal Regulations, 2012 CFR

2012-07-01

... mixed paper separation. 246.201-3 Section 246.201-3 Protection of Environment ENVIRONMENTAL PROTECTION... Recommended Procedures § 246.201-3 Recommended procedures: Glass, can, and mixed paper separation. In areas where markets are available, it is recommended that glass, cans, and mixed paper be separated at the...

40 CFR 246.201-3 - Recommended procedures: Glass, can, and mixed paper separation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Glass, can... and Recommended Procedures § 246.201-3 Recommended procedures: Glass, can, and mixed paper separation. In areas where markets are available, it is recommended that glass, cans, and mixed paper be...

40 CFR 246.201-3 - Recommended procedures: Glass, can, and mixed paper separation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommended procedures: Glass, can... and Recommended Procedures § 246.201-3 Recommended procedures: Glass, can, and mixed paper separation. In areas where markets are available, it is recommended that glass, cans, and mixed paper be...

3 CFR 102.171-102.999 - [Reserved

Code of Federal Regulations, 2011 CFR

2011-01-01

... Aug. 31 National Wilderness Month, 2010 54455 8554 Sept. 1 National Childhood Obesity Awareness Month...: Establishing a Task Force on Childhood Obesity 7197 Feb. 23 Notice: Continuation of the National Emergency... (Proc. 8578)Childhood Cancer Awareness Month, National (Proc. 8556)Childhood Obesity Awareness Month...

Estimating multilevel logistic regression models when the number of clusters is low: a comparison of different statistical software procedures.

PubMed

Austin, Peter C

2010-04-22

Multilevel logistic regression models are increasingly being used to analyze clustered data in medical, public health, epidemiological, and educational research. Procedures for estimating the parameters of such models are available in many statistical software packages. There is currently little evidence on the minimum number of clusters necessary to reliably fit multilevel regression models. We conducted a Monte Carlo study to compare the performance of different statistical software procedures for estimating multilevel logistic regression models when the number of clusters was low. We examined procedures available in BUGS, HLM, R, SAS, and Stata. We found that there were qualitative differences in the performance of different software procedures for estimating multilevel logistic models when the number of clusters was low. Among the likelihood-based procedures, estimation methods based on adaptive Gauss-Hermite approximations to the likelihood (glmer in R and xtlogit in Stata) or adaptive Gaussian quadrature (Proc NLMIXED in SAS) tended to have superior performance for estimating variance components when the number of clusters was small, compared to software procedures based on penalized quasi-likelihood. However, only Bayesian estimation with BUGS allowed for accurate estimation of variance components when there were fewer than 10 clusters. For all statistical software procedures, estimation of variance components tended to be poor when there were only five subjects per cluster, regardless of the number of clusters.

Study of application rates of aerosol and pump hair sprays. Final report, July 1986-November 1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boggs, R.R.; Belmont, B.

Application rates of three hair spray dispensing systems, aerosol, pump, and Exxel packaging were determined through a six-week user panel of approximately 300 people. In addition, photochemically reactive organic compounds (PROC) application rates were determined through chemical analysis of the products. The user panel was stratified on the basis of sex, dispenser (pump/aerosol), and age (adult/teen). Weighted-application rates and weighted PROC application rates are included. A Mann-Whitney evaluation was made to evaluate differences between data sets. Product-usage data for both male and female adult groups support the conclusion that increased use of either pumps or Exxel packaging for hair spraymore » would reduce PROC emissions in California. Data from adult groups also indicate that use of Exxel packaging in place of pumps would not reduce PROC. Consumer preference was also sampled. Adult pump users were not very willing to switch to aerosols, but on the order of half of aerosol users were willing to switch to pumps.« less

General multiyear aggregation technology: Methodology and software documentation. [estimating seasonal crop acreage proportions

NASA Technical Reports Server (NTRS)

Baker, T. C. (Principal Investigator)

1982-01-01

A general methodology is presented for estimating a stratum's at-harvest crop acreage proportion for a given crop year (target year) from the crop's estimated acreage proportion for sample segments from within the stratum. Sample segments from crop years other than the target year are (usually) required for use in conjunction with those from the target year. In addition, the stratum's (identifiable) crop acreage proportion may be estimated for times other than at-harvest in some situations. A by-product of the procedure is a methodology for estimating the change in the stratum's at-harvest crop acreage proportion from crop year to crop year. An implementation of the proposed procedure as a statistical analysis system routine using the system's matrix language module, PROC MATRIX, is described and documented. Three examples illustrating use of the methodology and algorithm are provided.

Human Infrastructure & Human Activity Detection

DTIC Science & Technology

2007-07-01

Personnel Detection Using Seismic Sensors”, Proc. of SPIE, Vol. 5090, 2003, pp. 162-173. [3] J. M. Cathcart , “Phenomenological investigations into...personnel signatures,” Proc. of the SPIE, Vol. 5796, pp. 428-434, May 2005. [4] B. Mauro & J. M. Cathcart , “Analysis of visible band sensors for

UAS-NAS Live Virtual Constructive Distributed Environment (LVC): LVC Gateway, Gateway Toolbox, Gateway Data Logger (GDL), SaaProc Software Design Description

NASA Technical Reports Server (NTRS)

Jovic, Srboljub

2015-01-01

This document provides the software design description for the two core software components, the LVC Gateway, the LVC Gateway Toolbox, and two participants, the LVC Gateway Data Logger and the SAA Processor (SaaProc).

The use of "mixing" procedure of mixed methods in health services research.

PubMed

Zhang, Wanqing; Creswell, John

2013-08-01

Mixed methods research has emerged alongside qualitative and quantitative approaches as an important tool for health services researchers. Despite growing interest, among health services researchers, in using mixed methods designs, little has been done to identify the procedural aspects of doing so. To describe how mixed methods researchers mix the qualitative and quantitative aspects of their studies in health services research. We searched the PubMed for articles, using mixed methods in health services research, published between January 1, 2006 and December 30, 2010. We identified and reviewed 30 published health services research articles on studies in which mixed methods had been used. We selected 3 articles as illustrations to help health services researcher conceptualize the type of mixing procedures that they were using. Three main "mixing" procedures have been applied within these studies: (1) the researchers analyzed the 2 types of data at the same time but separately and integrated the results during interpretation; (2) the researchers connected the qualitative and quantitative portions in phases in such a way that 1 approach was built upon the findings of the other approach; and (3) the researchers mixed the 2 data types by embedding the analysis of 1 data type within the other. "Mixing" in mixed methods is more than just the combination of 2 independent components of the quantitative and qualitative data. The use of "mixing" procedure in health services research involves the integration, connection, and embedding of these 2 data components.

Pursuit, Avoidance, and Cohesion in Flight: Multi-Purpose Control Laws and Neuromorphic VLSI

DTIC Science & Technology

2010-10-01

34 Binaural Spectral Cues for Ultrasonic Localization," Proc. International Symposium on Circuits and Systems, pp. 2110 - 2113, 2008 (DOI:10.1109/ISCAS...T. K. Horiuchi, C. Bansal, and T. M. Massoud (2009), " Binaural Intensity Comparison in the Echolocating Bat Using Synaptic Conductance," Proc

Item Purification in Differential Item Functioning Using Generalized Linear Mixed Models

ERIC Educational Resources Information Center

Liu, Qian

2011-01-01

For this dissertation, four item purification procedures were implemented onto the generalized linear mixed model for differential item functioning (DIF) analysis, and the performance of these item purification procedures was investigated through a series of simulations. Among the four procedures, forward and generalized linear mixed model (GLMM)…

New generation mix-designs : laboratory-field testing and modifications to Texas HMA mix-design procedures.

DOT National Transportation Integrated Search

2012-10-01

Recent changes to the Texas hot mix asphalt (HMA) mix-design procedures such as adaption of the higher-stiffer PG asphalt-binder grades and the Hamburg test have ensured that the mixes that are routinely used on the Texas highways are not prone to ru...

Advanced Visual and Instruction Systems for Maintenance Support (AVIS-MS)

DTIC Science & Technology

2006-12-01

Hayashi , "Augmentable Reality: Situated Communication through Physical and Digital Spaces," Proc. 2nd Int’l Symp. Wearable Computers, IEEE CS Press...H. Ohno , "An Optical See-through Display for Mutual Occlusion of Real and Virtual Environments," Proc. Int’l Symp. Augmented Reality 2000 (ISARO0

Predicting Database Requirements for Geographic Information Systems in the Year 2000: Long-Term Design Issues for GRASS

DTIC Science & Technology

1992-08-01

Image Processing. Reading, Massachusetts: Addison-Wesley (1977). Graefe, G., "Parallelizing the Volcano Query Processor," Proc. IEEE COMPCON 90...Approach to a Next Generation of Hypermedia System," Proc. IEEE COMPCON 90 (February 1990), pp 520-527. Jellinghaus, R., " Eiffel Linda: An Object

Performance Evaluation of Multihop Packet Radio Networks by Simulation

DTIC Science & Technology

1987-03-01

Multihop Packet Radio Networks," Proc. IEEE, Vol. 75, No. 1, January 1987. [15] 1. Gitman , "On the Capacity of Slotted ALOHA Networks and Some Design...Networks in the Presence of Noise," Proc. Infocom, Washington D. C., April 1985 [40] H. Frank, I. Gitman and R. Van Slyke, " Packet Radio System

Evaluation of Low-volume Sprayers Used in Asian Citrus Psyllid Control Applications

DTIC Science & Technology

2010-06-01

control, p. 149–157. In: B. Aubert, S. Tontyaporn, and D. Buangsuwon (eds.). Proc. Asia Pacific Intl. Conf. Citriculture, Chiang Mai , Thailand, 4–10...planning and management, p. 77–82. In: B. Aubert, S. Tontyaporn, and D. Buangsuwon (eds.). Proc. Asia Pacific Intl. Conf. Citriculture, Chiang Mai , Thailand

Recent Advances In Radar Polarimetry And Polarimetric SAR Interferometry

DTIC Science & Technology

2007-02-01

Workshop, ESA SERRÍN, Frascati, Italy, January 2003. [69] EUSAR 2000 Procs, VDE Verlag, Offenbach, ISBN: 3-8007-2544-4, Munich, Germany, May 2000. [70...EUSAR 2002 Procs, VDE Verlag, Offenbach, ISBN: 3-8007-2697-1, Cologne, Germany, June 2002. [71] Ferro-Famil, L. and E. Pottier, 2000, "Description of

Detection of Explosives on Surfaces Using UV Raman Spectroscopy: Effect of Substrate Color

DTIC Science & Technology

2017-10-01

Jr, editors. Proc. SPIE 5794; Detection and Remediation Technologies for Mines and Minelike Targets X; 2005; Orlando, FL. Bellingham (WA): Society of...detection of 2,4-DNT in contact with sand particles. In: Harmon RS, Broach JT, Holloway JH Jr, editors. Proc. SPIE 6217; Detection and Remediation

Using SAS PROC CALIS to fit Level-1 error covariance structures of latent growth models.

PubMed

Ding, Cherng G; Jane, Ten-Der

2012-09-01

In the present article, we demonstrates the use of SAS PROC CALIS to fit various types of Level-1 error covariance structures of latent growth models (LGM). Advantages of the SEM approach, on which PROC CALIS is based, include the capabilities of modeling the change over time for latent constructs, measured by multiple indicators; embedding LGM into a larger latent variable model; incorporating measurement models for latent predictors; and better assessing model fit and the flexibility in specifying error covariance structures. The strength of PROC CALIS is always accompanied with technical coding work, which needs to be specifically addressed. We provide a tutorial on the SAS syntax for modeling the growth of a manifest variable and the growth of a latent construct, focusing the documentation on the specification of Level-1 error covariance structures. Illustrations are conducted with the data generated from two given latent growth models. The coding provided is helpful when the growth model has been well determined and the Level-1 error covariance structure is to be identified.

Runaway reactions, their courses and the methods to establish safe process conditions

NASA Astrophysics Data System (ADS)

Gustin, J. L.

1991-08-01

Much of the literature on runaway reactions deals with the consequences such as mechanical damage toxic and flammable release. The DIERS literature provides effective methods for vent sizing where experimental information is requested. Thermal stability measurements provide information on the onset temperature and kinetic data for chemical reactions. There is less information on the way the runaway reactions occur whereas the runaway reactions may have different causes. The purpose of this paper is to describe the various process deviations which can cause a runaway reaction to occur and to discuss the experimental information necessary for risk assessment, the choice of a safe process and the mitigation of the consequences of the runaway reaction. Each possible hazardous process deviation is illustrated by examples from the process industry and/or relevant experimental information obtained from laboratory experiments. The typical hazardous situations to be considered are the following: 1) The homogeneous thermal runaway due to too high a temperature. 2) The homogeneous runaway reaction by unintended introduction of additional reactants or catalyst. 3) The heterogeneous runaway reaction due to too high a local temperature. 4) The heterogeneous runaway reaction caused by slow heat conduction to the outside. 5) The runaway reaction caused by excess residence time at the process temperature (autocatalytic reactions). 6) The runaway reaction caused by reactant accumulation. The controling reactant feed rate is higher than the consumption rate perhaps because the temperature is too low, or the catalyst is absent. 7) The runaway reaction due to the pressurization of the enclosure by gaseous oxidizing intermediates (typical of nitric oxidations). 8) The runaway reaction due to phase separation of unstable species (liquids, solids) by loss of mixing or on cooling. 9) The runaway reaction on mixing of fast reacting chemicals in separate phases. 10)The runaway reaction due to fire or external heating. Considering the various runaway situations, the effectiveness of the following approaches is discussed: - Theoretical and experimental information required for hazard assessment. - Choice of adequate process conditions. - Choice of adequate methods for process control. - Experimental information required for vent sizing. La plus grande partie de la littérature sur les emballements thermiques traite des conséquences de l'accident telles que les effets mécaniques, les émissions toxiques et inflammables. Les travaux publiés par le DIERS fournissent des méthodes permettant le dimensionnement d'évents, nécessitant des déterminations expérimentales. Il y a moins d'information sur la manière dont les emballements thermiques peuvent survenir alors que ceux-ci peuvent avoir différentes causes. Le propos de cet article est de décrire les différentes dérives de procédé qui peuvent entraîner un emballement thermique et de déterminer l'information expérimentale nécessaire pour l'analyse des risques du procédé, le choix de conditions opératoires sûres et la réduction des conséquences de l'emballement thermique. Chaque dérive de procédé dangereuse, est illustrée par des exemples connus dans l'industrie chimique et par des données expérimentales obtenues dans des essais de laboratoire. Les conditions de procédé dangereuses prises en compte sont les suivantes: 1)L'emballement thermique homogène dû à une température excessive; 2) L'emballement thermique homogène par introduction d'un catalyseur ou d'un réactif contrôlant; 3) L'emballement thermique hétérogène dû à une température locale excessive; 4)L'emballement thermique hétérogène dû à une faible conduction thermique vers l'extérieur; 5) L'emballement thermique dû à un temps de séjour excessif à la température du procédé (Réactions autocatalytiques); 6) L'emballement thermique par accumulation de réactifs. La vitesse d'introduction d'un réactif contrôlant est supérieure à la vitesse de consommation de ce réactif, parce que la température est trop basse ou le catalyseur absent; 7) L'emballement thermique dû à la pressurisation d'une enceinte par des intermédiaires gazeux oxydants (situation caractéristique des oxydations nitriques), 8)L'emballement thermique dû à la séparation de phases contenant des espèces instables (liquides, solides) par perte de l'agitation ou par refroidissement; 9) L'emballement thermique par mélange de produits incompatibles, se trouvant précédemment dans des phases séparées; 10) L'emballement thermique dû à un chauffage externe ou à un feu. Considérant les différentes situations conduisant à un emballement thermique, l'intérêt de l'approche systématique suivante est examiné: - Information théorique et expérimentale nécessaire pour déterminer les risques du procédé. - Choix de conditions opératoires adéquates. - Choix de méthodes convenables pour le contrôle du procédé. - Information expérimentale nécessaire pour le calcul d'évent.

Analyzing Longitudinal Data with Multilevel Models: An Example with Individuals Living with Lower Extremity Intra-articular Fractures

PubMed Central

Kwok, Oi-Man; Underhill, Andrea T.; Berry, Jack W.; Luo, Wen; Elliott, Timothy R.; Yoon, Myeongsun

2008-01-01

The use and quality of longitudinal research designs has increased over the past two decades, and new approaches for analyzing longitudinal data, including multi-level modeling (MLM) and latent growth modeling (LGM), have been developed. The purpose of this paper is to demonstrate the use of MLM and its advantages in analyzing longitudinal data. Data from a sample of individuals with intra-articular fractures of the lower extremity from the University of Alabama at Birmingham’s Injury Control Research Center is analyzed using both SAS PROC MIXED and SPSS MIXED. We start our presentation with a discussion of data preparation for MLM analyses. We then provide example analyses of different growth models, including a simple linear growth model and a model with a time-invariant covariate, with interpretation for all the parameters in the models. More complicated growth models with different between- and within-individual covariance structures and nonlinear models are discussed. Finally, information related to MLM analysis such as online resources is provided at the end of the paper. PMID:19649151

Internal waves in sheared flows: Lower bound of the vorticity growth and propagation discontinuities in the parameter space

NASA Astrophysics Data System (ADS)

Fraternale, Federico; Domenicale, Loris; Staffilani, Gigliola; Tordella, Daniela

2018-06-01

This study provides sufficient conditions for the temporal monotonic decay of enstrophy for two-dimensional perturbations traveling in the incompressible, viscous, plane Poiseuille, and Couette flows. Extension of Synge's procedure [J. L. Synge, Proc. Fifth Int. Congress Appl. Mech. 2, 326 (1938); Semicentenn. Publ. Am. Math. Soc. 2, 227 (1938)] to the initial-value problem allow us to find the region of the wave-number-Reynolds-number map where the enstrophy of any initial disturbance cannot grow. This region is wider than that of the kinetic energy. We also show that the parameter space is split into two regions with clearly distinct propagation and dispersion properties.

Development and Analysis of Security Policies in Security Enhanced Android

DTIC Science & Technology

2012-12-01

Privilege - Escalation Attacks on Android ,” Proc. 19th Annual...Services, Bethesda, MD, 2011, pp. 239–252. 98 [43] L. Davi, et al. “ Privilege Escalation Attacks on Android ,” Proc. 13th Int. Conf. on Information...TaintDroid. XManDroid dynamically analyzes applications’ transitive permission usage in order to prevent application-level privilege escalation attacks

Using SAS PROC MCMC for Item Response Theory Models

ERIC Educational Resources Information Center

Ames, Allison J.; Samonte, Kelli

2015-01-01

Interest in using Bayesian methods for estimating item response theory models has grown at a remarkable rate in recent years. This attentiveness to Bayesian estimation has also inspired a growth in available software such as WinBUGS, R packages, BMIRT, MPLUS, and SAS PROC MCMC. This article intends to provide an accessible overview of Bayesian…

26 CFR 601.201 - Rulings and determinations letters.

Code of Federal Regulations, 2010 CFR

2010-04-01

... entire group. See, for example, Rev. Proc. 78-15, 1978-2 C.B. 488, and Rev. Proc. 78-16, 1978-2 C.B. 489... rulings to business, trade, or industrial associations or to other similar groups relating to the application of the tax laws to members of the group. However, rulings may be issued to such groups or...

26 CFR 601.201 - Rulings and determinations letters.

Code of Federal Regulations, 2011 CFR

2011-04-01

... entire group. See, for example, Rev. Proc. 78-15, 1978-2 C.B. 488, and Rev. Proc. 78-16, 1978-2 C.B. 489... rulings to business, trade, or industrial associations or to other similar groups relating to the application of the tax laws to members of the group. However, rulings may be issued to such groups or...

26 CFR 601.201 - Rulings and determinations letters.

Code of Federal Regulations, 2014 CFR

2014-04-01

... entire group. See, for example, Rev. Proc. 78-15, 1978-2 C.B. 488, and Rev. Proc. 78-16, 1978-2 C.B. 489... rulings to business, trade, or industrial associations or to other similar groups relating to the application of the tax laws to members of the group. However, rulings may be issued to such groups or...

26 CFR 601.201 - Rulings and determinations letters.

Code of Federal Regulations, 2013 CFR

2013-04-01

... entire group. See, for example, Rev. Proc. 78-15, 1978-2 C.B. 488, and Rev. Proc. 78-16, 1978-2 C.B. 489... rulings to business, trade, or industrial associations or to other similar groups relating to the application of the tax laws to members of the group. However, rulings may be issued to such groups or...

26 CFR 601.201 - Rulings and determinations letters.

Code of Federal Regulations, 2012 CFR

2012-04-01

... entire group. See, for example, Rev. Proc. 78-15, 1978-2 C.B. 488, and Rev. Proc. 78-16, 1978-2 C.B. 489... rulings to business, trade, or industrial associations or to other similar groups relating to the application of the tax laws to members of the group. However, rulings may be issued to such groups or...

Multi-Fluid Interpenetration Mixing in X-ray and Directly Laser driven ICF Capsule Implosions

NASA Astrophysics Data System (ADS)

Wilson, Douglas

2003-10-01

Mix between a surrounding shell and the fuel leads to degradation in ICF capsule performance. Both indirectly (X-ray) and directly laser driven implosions provide a wealth of data to test mix models. One model, the multi-fluid interpenetration mix model of Scannapieco and Cheng (Phys. Lett. A., 299, 49, 2002), was implemented in an ICF code and applied to a wide variety of experiments (e.g. J. D. Kilkenny et al., Proc. Conf Plasm. Phys. Contr. Nuc. Fus. Res. 3, 29(1988), P. Amendt, R. E. Turner, O. L. Landen, Phy. Rev. Lett., 89, 165001 (2002), or Li et al., Phy. Rev. Lett, 89, 165002 (2002)). With its single adjustable parameter fixed, it replicates well the yield degradation with increasing convergence ratio for both directly and indirectly driven capsules. Often, but not always the ion temperatures with mixing are calculated to be higher than in an unmixed implosion, agreeing with observations. Comparison with measured directly driven implosion yield rates ( from the neutron temporal diagnostic or NTD) shows mixing increases rapidly during the burn. The model also reproduces the decrease of the fuel "rho-r" with fill gas pressure, measured by observing escaping deuterons or secondary neutrons. The mix model assumes fully atomically mixed constituents, but when experiments with deuterated plastic layers and 3He fuel are modeled, less that full atomic mix is appropriate. Applying the mix model to the ablator - solid DT interface in indirectly driven ignition capsules for the NIF or LMJ suggests that the capsules will ignite, but that burn after ignition may be somewhat degraded. Situations in which the Scannapieco and Cheng model fails to agree with experiments can guide us to improvements or the development of other models. Some directly driven symmetric implosions suggest that in highly mixed situations, a higher value of the mix parameter may needed. Others show the model underestimating the fuel burn temperature. This work was performed by the Los Alamos National Laboratory under DOE contract number W-7405-Eng-36.

High-Performance Solid-State and Fiber Lasers Controlled by Volume Bragg Gratings

DTIC Science & Technology

2013-09-01

Glebov: Proc. SPIE 8237 (2012) 823705. 12） I. Divliansky, D. Ott, B. Anderson, G. Venus, and L. Glebov: To be published in Opt. Express. 13） A. Jain...B. Anderson, D. Drachenberg, V. Rotar, G. Venus, and L. Glebov: Proc. SPIE 8237 (2012) 823705. 47） B. Anderson, S. Kaim, G. B. Venus, J. Lumeau, V

Condition Monitoring Techniques for Electromechanical Equipment Used in Air Force Ground C3I (Command, Control, Communications and Intelligence) Systems.

DTIC Science & Technology

1983-08-01

Proc. 2nd Congress National de flabilite, Perros -Guirec, Sept. 17-20, 1974, pp. 639-653. Published by CNET, Lannion (France). 53. Love, A. E. H., A...96. C. Rosiaux, Fiabilite des allumeurs determinee a partir des ventes-echanges, Proc. 2nd Congres National de fiabilite, Perros Guirec, Sept. 17-20

Terrestrial Planet Finder Interferometer (TPF-1) Whitepaper for the AAAC Exoplanet Task Force

DTIC Science & Technology

2007-04-02

very strong indication of a biological release ( Lovelock 1980; Sagan et al. 1993). The three strongest bands in the Earth-analog spectrum, O3 band...A., Henry, C. A., et al. 2005, Proc. SPIE, 5905, 8 Lay, O. P. 2006, Proc. SPIE, 6268, 62681A Lovelock , J. E. 1980, Cosmic Search, 2, (4), 2 Martin

Maritime In Situ Sensing Inter-Operable Networks (MISSION)

DTIC Science & Technology

2013-09-30

creating acoustic communications (acomms) technologies enabling underwater sensor networks and distributed systems. Figure 1. Project MISSION...Marn, S. Ramp, F. Bahr, “Implementation of an Underwater Wireless Sensor Network in San Francisco Bay,” Proc. 10th International Mine Warfare...NILUS – An Underwater Acoustic Sensor Network Demonstrator System,” Proc. 10th International Mine Warfare Technology Symposium, Monterey, CA, May 7

Protein Structure Validation and Refinement Using Amide Proton Chemical Shifts Derived from Quantum Mechanics

PubMed Central

Christensen, Anders S.; Linnet, Troels E.; Borg, Mikael; Boomsma, Wouter; Lindorff-Larsen, Kresten; Hamelryck, Thomas; Jensen, Jan H.

2013-01-01

We present the ProCS method for the rapid and accurate prediction of protein backbone amide proton chemical shifts - sensitive probes of the geometry of key hydrogen bonds that determine protein structure. ProCS is parameterized against quantum mechanical (QM) calculations and reproduces high level QM results obtained for a small protein with an RMSD of 0.25 ppm (r = 0.94). ProCS is interfaced with the PHAISTOS protein simulation program and is used to infer statistical protein ensembles that reflect experimentally measured amide proton chemical shift values. Such chemical shift-based structural refinements, starting from high-resolution X-ray structures of Protein G, ubiquitin, and SMN Tudor Domain, result in average chemical shifts, hydrogen bond geometries, and trans-hydrogen bond (h3 JNC') spin-spin coupling constants that are in excellent agreement with experiment. We show that the structural sensitivity of the QM-based amide proton chemical shift predictions is needed to obtain this agreement. The ProCS method thus offers a powerful new tool for refining the structures of hydrogen bonding networks to high accuracy with many potential applications such as protein flexibility in ligand binding. PMID:24391900

Image guided percutaneous spine procedures using an optical see-through head mounted display: proof of concept and rationale.

PubMed

Deib, Gerard; Johnson, Alex; Unberath, Mathias; Yu, Kevin; Andress, Sebastian; Qian, Long; Osgood, Gregory; Navab, Nassir; Hui, Ferdinand; Gailloud, Philippe

2018-05-30

Optical see-through head mounted displays (OST-HMDs) offer a mixed reality (MixR) experience with unhindered procedural site visualization during procedures using high resolution radiographic imaging. This technical note describes our preliminary experience with percutaneous spine procedures utilizing OST-HMD as an alternative to traditional angiography suite monitors. MixR visualization was achieved using the Microsoft HoloLens system. Various spine procedures (vertebroplasty, kyphoplasty, and percutaneous discectomy) were performed on a lumbar spine phantom with commercially available devices. The HMD created a real time MixR environment by superimposing virtual posteroanterior and lateral views onto the interventionalist's field of view. The procedures were filmed from the operator's perspective. Videos were reviewed to assess whether key anatomic landmarks and materials were reliably visualized. Dosimetry and procedural times were recorded. The operator completed a questionnaire following each procedure, detailing benefits, limitations, and visualization mode preferences. Percutaneous vertebroplasty, kyphoplasty, and discectomy procedures were successfully performed using OST-HMD image guidance on a lumbar spine phantom. Dosimetry and procedural time compared favorably with typical procedural times. Conventional and MixR visualization modes were equally effective in providing image guidance, with key anatomic landmarks and materials reliably visualized. This preliminary study demonstrates the feasibility of utilizing OST-HMDs for image guidance in interventional spine procedures. This novel visualization approach may serve as a valuable adjunct tool during minimally invasive percutaneous spine treatment. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

PTEN Loss Antagonizes Calcitriol-Mediated Growth Inhibition in Prostate Epithelial Cells

DTIC Science & Technology

2009-05-01

deleting lentiviral vector: efficient gene targeting in vivo. Proc Natl Acad Sci U S A, 98: 11450-11455, 2001. 27. Vlahos , C. J., Matter, W. F., Hui, K...and in aging skin in vivo. Proc Natl Acad Sci U S A, 92: 9363-9367, 1995. 35. Vlahos , C. J., Matter, W. F., Hui, K. Y., and Brown, R. F. A specific

Stationary Digital Tomosynthesis System for Early Detection of Breast Tumors

DTIC Science & Technology

2011-05-01

selenium flat panel detector. Proc. SPIE 2005. 5745: p. 529-540 4. Kopans, D.B., Breast Imaging. 2 ed. 1997, New York Lippincott Williams and...same. 2005. 8. M. Bissonnette, et al. Digital breast tomosynthesis using an amorphous selenium flat panel detector. in Medical Imaging 2005...tomosynthesis system with selenium based flat panel detector. Proc of SPIE, Physics of Medical Imaging, 2005. 5745. 12

Research in Stochastic Processes

DTIC Science & Technology

1988-08-31

stationary sequence, Stochastic Proc. Appl. 29, 1988, 155-169 T. Hsing, J. Husler and M.R. Leadbetter, On the exceedance point process for a stationary...Nandagopalan, On exceedance point processes for "regular" sample functions, Proc. Volume, Oberxolfach Conf. on Extreme Value Theory, J. Husler and R. Reiss...exceedance point processes for stationary sequences under mild oscillation restrictions, Apr. 88. Obermotfach Conf. on Extremal Value Theory. Ed. J. HUsler

Thermochemical Processes in Plasma Aerodynamics

DTIC Science & Technology

2006-06-01

hydrocarbon fuel possesses not only much lower induction time but also more effective potential in thermodynamic combustion cycle (more complete exergy ... Internal Plasma- Assisted Combustion, AIAA Paper 2004-1014. Proc. 42 "d AIAA Aerospace Sciences Meeting & Exhibit, 4-8 January 2004, Reno, NV, P. 10 2...Vystavkin N, Sukovatkin N, Serov Yu, Savischenko N, Yuriev A., External and Internal Plasma- Assisted Combustion AIAA Paper 2003-6240. Proc. 41st

Solid State Research

DTIC Science & Technology

1988-11-15

Reduction of Intermodulation L.M. Johnson Opt. Lett. 13, 928 (1988) Distortion in Interferometric H.V. Roussell Optical Modulators * Author not at Lincoln...Engineering V, Proc. Niobate Interferometric Modulators SPIE 835, 29 (1988), DTIC AD-A198029 7553 Advanced Device Fabrication with W.D. Goodhue Proc...Colorado, 3 October 1988 7741 B Integrated-Optical Interferometric L.M. Johnson 2 X 2 Switches H.V.Roussell 7927B Free-Space Optical Interconnects

Reliability Evaluation of Computer Systems.

DTIC Science & Technology

1981-01-01

algorithms in hardware is not restricted by the designs of particular circuits. Applications could be made in new computer architectures; one candidate...pp. 137-148, IEEE, Chicago, Illinois, September 1963. (With J.F. Wakerly ) "Design of Low-Cost General-Purpose Self- Diagnosing Computers," Proc...34 Proc., IEEE Int’l Solid-State Circuits Conference, Philadelphia, Pennsylvania, February 16-18, 1977. (With J.F. Wakerly ) "Microcomputers in the

The Relativistic Geometry and Dynamics of Electrons

NASA Astrophysics Data System (ADS)

Atiyah, M. F.; Malkoun, J.

2018-02-01

Atiyah and Sutcliffe (Proc R Soc Lond Ser A 458:1089-1115, 2002) made a number of conjectures about configurations of N distinct points in hyperbolic 3-space, arising from ideas of Berry and Robbins (Proc R Soc Lond Ser A 453:1771-1790, 1997). In this paper we prove all these conjectures, purely geometrically, but we also provide a physical interpretation in terms of Electrons.

Evaluation of the effect of different methods of microabrasion and polishing on surface roughness of dental enamel.

PubMed

Bertoldo, Carlos; Lima, Debora; Fragoso, Larissa; Ambrosano, Glaucia; Aguiar, Flavio; Lovadino, Jose

2014-01-01

The microabrasion technique of enamel consists of selectively abrading the discolored areas or causing superficial structural changes in a selective way. In microabrasion technique, abrasive products associated with acids are used, and the evaluation of enamel roughness after this treatment, as well as surface polishing, is necessary. This in-vitro study evaluated the enamel roughness after microabrasion, followed by different polishing techniques. Roughness analyses were performed before microabrasion (L1), after microabrasion (L2), and after polishing (L3).Thus, 60 bovine incisive teeth divided into two groups were selected (n=30): G1- 37% phosphoric acid (37%) (Dentsply) and pumice; G2- hydrochloric acid (6.6%) associated with silicon carbide (Opalustre - Ultradent). Thereafter, the groups were divided into three sub-groups (n=10), according to the system of polishing: A - Fine and superfine granulation aluminum oxide discs (SofLex 3M); B - Diamond Paste (FGM) associated with felt discs (FGM); C - Silicone tips (Enhance - Dentsply). A PROC MIXED procedure was applied after data exploratory analysis, as well as the Tukey-Kramer test (5%). No statistical differences were found between G1 and G2 groups. L2 differed statistically from L1 and showed superior amounts of roughness. Differences in the amounts of post-polishing roughness for specific groups (1A, 2B, and 1C) arose, which demonstrated less roughness in L3 and differed statistically from L2 in the polishing system. All products increased enamel roughness, and the effectiveness of the polishing systems was dependent upon the abrasive used.

Accelerated collagen turnover in women with angina pectoris without obstructive coronary artery disease: An iPOWER substudy.

PubMed

Nielsen, Signe H; Mygind, Naja D; Michelsen, Marie M; Bechsgaard, Daria F; Suhrs, Hannah E; Genovese, Federica; Nielsen, Henning B; Brix, Susanne; Karsdal, Morten; Prescott, Eva; Kastrup, Jens

2018-05-01

Aim Collagens are major cardiac extracellular matrix components, known to be actively remodelled and accumulated during diffuse myocardial fibrosis. We evaluated whether accelerated collagen turnover described by neo-epitope biomarkers reflecting collagen formation and degradation separates patients with diffuse myocardial fibrosis from asymptomatic controls. Methods and results Seventy-one women with angina pectoris without significant coronary artery disease assessed by invasive coronary angiogram were included. Competitive enzyme-linked immunosorbent assays (ELISAs) measuring circulating protein fragments in serum assessed the formation and degradation of collagen type III (Pro-C3, C3M and C3C), IV (P4NP7S and C4M), V (Pro-C5 and C5M) and VI (Pro-C6 and C6M), and degradation of collagen type I (C1M). Serum samples from 32 age-matched asymptomatic women were included as controls. Symptomatic women presented significantly elevated levels of Pro-C6, C3C, C3M, C4M and C8-C ( p < 0.0001-0.0058) and significantly decreased levels of Pro-C3, C5M and C6M ( p < 0.0001-0.041), reflecting accelerated collagen turnover and an imbalanced collagen formation and degradation compared to controls. Cardiac magnetic resonance T1 mapping was performed to determine extracellular volume fraction and thus diffuse myocardial fibrosis. A significant association was identified between C5M and extracellular volume fraction by cardiac magnetic resonance ( p = 0.01). Conclusion Women with angina pectoris, but without significant obstructive coronary artery disease, showed an imbalanced collagen turnover compared to asymptomatic controls. The examined biomarkers are tools to monitor active collagen remodelling in patients with angina pectoris, in risk of developing myocardial fibrosis.

An Innovative Multi-Agent Search-and-Rescue Path Planning Approach

DTIC Science & Technology

2015-03-09

search problems from search theory and artificial intelligence /distributed robotic control, and pursuit-evasion problem perspectives may be found in...Dissanayake, “Probabilistic search for a moving target in an indoor environment”, In Proc. IEEE/RSJ Int. Conf. Intelligent Robots and Systems, 2006, pp...3393-3398. [7] H. Lau, and G. Dissanayake, “Optimal search for multiple targets in a built environment”, In Proc. IEEE/RSJ Int. Conf. Intelligent

Securing BGP Using External Security Monitors

DTIC Science & Technology

2006-01-01

forms. In Proc. SOSP, Brighton , UK , Oct. 2005. [19] A. Seshadri, A. Perrig, L. van Doorn, and P. Khosla. SWATT: Software-based Attestation for...Williams, E. G. Sirer, and F. B. Schnei- der. Nexus: A New Operating System for Trustwor- thy Computing (extended abstract). In Proc. SOSP, Brighton , UK ...as a distributed database of untrustworthy hosts or messages. An ESM that detects invalid behavior issues a certifi- cate describing the behavior or

Antithrombin deficiency and decreased protein C activity in a young man with venous thromboembolism: a case report.

PubMed

Wang, Dong; Tian, Min; Cui, Guanglin; Wang, Dao Wen

2018-06-01

Antithrombin and protein C are two crucial members in the anticoagulant system and play important roles in hemostasis. Mutations in SERPINC1 and PROC lead to deficiency or dysfunction of the two proteins, which could result in venous thromboembolism (VTE). Here, we report a Chinese 22-year-old young man who developed recurrent and serious VTE in cerebral veins, visceral veins, and deep veins of the lower extremity. Laboratory tests and direct sequencing of PROC and SERPINC1 were conducted for the patient and his family members. Coagulation tests revealed that the patient presented type I antithrombin deficiency combined with decreased protein C activity resulting from a small insertion mutation c.848_849insGATGT in SERPINC1 and a short deletion variant c.572_574delAGA in PROC. This combination of the two mutations was absent in 400 healthy subjects each from southern and northern China. Then, we summarized all the mutations of the SERPINC1 and PROC gene reported in the Chinese Han population. This study demonstrates that the combination of antithrombin deficiency and decreased protein C activity can result in severe VTE and that the coexistence of different genetic factors may increase the risk of VTE.

Size-based sorting of micro-particles using microbubble streaming

NASA Astrophysics Data System (ADS)

Wang, Cheng; Jalikop, Shreyas; Hilgenfeldt, Sascha

2009-11-01

Oscillating microbubbles driven by ultrasound have shown great potential in microfluidic applications, such as transporting particles and promoting mixing [1-3]. The oscillations generate secondary steady streaming that can also trap particles. We use the streaming to develop a method of sorting particles of different sizes in an initially well-mixed solution. The solution is fed into a channel consisting of bubbles placed periodically along a side wall. When the bubbles are excited by an ultrasound piezo-electric transducer to produce steady streaming, the flow field is altered by the presence of the particles. This effect is dependent on particle size and results in size-based sorting of the particles. The effectiveness of the separation depends on the dimensions of the bubbles and particles as well as on the ultrasound frequency. Our experimental studies are aimed at a better understanding of the design and control of effective microfluidic separating devices. Ref: [1] P. Marmottant and S. Hilgenfeldt, Nature 423, 153 (2003). [2] P. Marmottant and S. Hilgenfeldt, Proc. Natl. Acad. Science USA, 101, 9523 (2004). [3] P. Marmottant, J.-P. Raven, H. Gardeniers, J. G. Bomer, and S. Hilgenfeldt, J. Fluid Mech., vol.568, 109 (2006).

Performance Characterization and Optimization of Microgrid-Based Energy Generation and Storage Technologies

DTIC Science & Technology

2012-01-01

A. Rufer, “Multiphysics and energetic modeling of a vanadium redox flow battery ,” in Proc. 2008 IEEE International Conference on Sustainable...p. 81. [11] K.W. Knehr and E.C. Kumbur, "Open circuit voltage of vanadium redox flow batteries : Discrepancy between models and experiments...Blanc and A. Rufer, “Multiphysics and energetic modeling of a vanadium redox flow battery ,” in Proc. 2008 IEEE International Conference on Sustainable

Performance Analysis of Hybrid ARQ Protocols in a Slotted Code Division Multiple-Access Network

DTIC Science & Technology

1989-08-01

Convolutional Codes . in Proc Int. Conf. Commun., 21.4.1-21.4.5, 1987. [27] J. Hagenauer. Rate Compatible Punctured Convolutional Codes . in Proc Int. Conf...achieved by using a low rate (r = 0.5), high constraint length (e.g., 32) punctured convolutional code . Code puncturing provides for a variable rate code ...investigated the use of convolutional codes in Type II Hybrid ARQ protocols. The error

Pump Diode Characterization for an Unstable Diode-Pumped Alkali Laser Resonator

DTIC Science & Technology

2013-03-01

2003. Petersen, A., and R. Lane, Second harmonic operation of diode-pumped Rb vapor lasers , Proc. of SPIE, 7005, 2008. Siegman , A. E., Lasers ...University Science Books, Sausalito, CA, 1986. Siegman , A. E., Defining, measuring and optimizing laser beam quality, Proc. of SPIE, 1868, 1993. Steck, D...PUMP DIODE CHARACTERIZATION FOR AN UNSTABLE DIODE-PUMPED ALKALI LASER RESONATOR THESIS Chad T. Taguba, Master Sergeant, USAF AFIT-ENP-13-M-33

Blood Organic Phosphate in Hyperthermic Dogs

DTIC Science & Technology

1959-06-01

fermenting uptake is then responsible for the previously yeast caused an increase in fezrmentation and a observed fall in plasma inorganic phosphate in...Young. The alcoholic 3. Radigan, L. R., and S. Robinson. Effects of ferment of yast- juice . Proc. Roy. Soc. London environmental heat stress and...4. Kenny, R. A. The effect of hot, humid environ- yeast - juice from hexose and phosphate. Proc. ments on the renal function of West Africans. Roy Soc

Polarization Orientation Dependence of the Far Infrared Spectra of Oriented Single Crystals of 1,3,5-trinitro-S-triazine (RDX) using Terahertz Time-Domain Spectroscopy

DTIC Science & Technology

2009-01-01

BE, Hogbin MR, Kemp MC (2007) Proc IEEE 95:1559 14. Laman N, Sree Harsha S, Grischkowsky D, Melinger JS (2008) Opt Express 16:4094 15. Melinger JS... Laman N, Grischkowsky D (2008) Appl Phy Lett 93:011102 16. Tribe WR, Newnham DA, Taday PF, Kemp MC (2004) Proc SPIE 5354:168 17. Watters DG, Falconer DG

Microsoft Research at TREC 2009. Web and Relevance Feedback Tracks

DTIC Science & Technology

2009-11-01

Information Processing Systems, pages 193–200, 2006. [2] J . M. Kleinberg. Authoritative sources in a hyperlinked environment. In Proc. of the 9th...Walker, S. Jones, M. Hancock-Beaulieu, and M. Gatford. Okapi at TREC-3. In Proc. of the 3rd Text REtrieval Conference, 1994. [8] J . J . Rocchio. Relevance...feedback in information retrieval. In Gerard Salton , editor, The SMART Retrieval System - Experiments in Automatic Document Processing. Prentice Hall

Nanocomposites for Enhanced Structural Integrity

DTIC Science & Technology

2007-09-11

Yong and H.T. Hahn, "Kevlar/Vinyl Ester Composites with SiC Nanoparticles ," SAMPE 2004 Proc. ( CD ROM), May 2004. C-6. M. Lui and H.T. Hahn...34 Nanoparticle -Based Mitigation of fiber Print-Through in Composite Mirrors," Proc. American Society for Composites, 20’h Technical Conference ( CD ROM), Sept. 2005...the graphene layers. Microwave radiation aids in drying and results in further separation of the sheets. Thermogravimetric analysis indicates that the

Security Games Applied to Real-World: Research Contributions and Challenges

DTIC Science & Technology

2012-01-01

Marecki, J.: GUARDS and PROTECT: Next Generation Applications of Security Games . SIGECOM 10 (March 2011) 31–34 4. Shieh, E ., An, B., Yang, R., Tambe...Steigerwald, E .: GUARDS - Game Theoretic Security Allocation on a National Scale. In: Proc. of The 10th International Conference on Autonomous Agents...Shieh, E ., Kiekintveld, C.: Refinement of Strong Stackelberg Equilibria in Security Games . In: Proc. of the 25th Conference on Artificial Intelligence

Spectral Analysis of Breast Cancer on Tissue Microarrays: Seeing Beyond Morphology

DTIC Science & Technology

2005-04-01

Harvey N., Szymanski J.J., Bloch J.J., Mitchell M. investigation of image feature extraction by a genetic algorithm. Proc. SPIE 1999;3812:24-31. 11...automated feature extraction using multiple data sources. Proc. SPIE 2003;5099:190-200. 15 4 Spectral-Spatial Analysis of Urine Cytology Angeletti et al...Appendix Contents: 1. Harvey, N.R., Levenson, R.M., Rimm, D.L. (2003) Investigation of Automated Feature Extraction Techniques for Applications in

A Modular Set of Mixed Reality Simulators for Blind and Guided Procedures

DTIC Science & Technology

2016-08-01

AWARD NUMBER: W81XWH-14-1-0113 TITLE: A Modular Set of Mixed Reality Simulators for “blind” and Guided Procedures PRINCIPAL INVESTIGATOR...2015 – 07/31/2016 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER A Modular Set of Mixed Reality Simulators for “Blind” and Guided Procedures 5b...editor developed to facilitate creation by non-technical educators of ITs for the set of modular simulators, (c) a curriculum for self-study and self

Ground Motion Studies for Large Future Accelerator

NASA Astrophysics Data System (ADS)

Takeda, Shigeru; Oide, Katsunobu

1997-05-01

The future large accelerator, such as TeV linear collider, should have extremely small emittance to perform the required luminosity. Precise alignment of machine components is essential to prevent emittance dilution. The ground motion spoils alignment of accelerator elements and results in emittance growth. The ground motion in the frequency range of seismic vibration is mostly coherent in the related accelerator. But the incoherent diffusive or Brownian like motion becomes dominant at frequency region less than seismic vibration [1, 2, 3]. Slow ground motion with respect to the machine performance is discussed including the method of tunnel construction. Our experimental results and recent excavated results clarify that application of TBMs is better excavating method than NATM (Drill + Blast) for accelerator tunnel to prevent emittance dilution. ([1] V. Shiltsev, Proc. of IWAA95 Tsukuba, 1995. [2] Shigeru Takeda et al., Proc. of EPAC96, 1996. [3] A. Sery, Proc. of LINAC96, 1996.)

Item Selection and Ability Estimation Procedures for a Mixed-Format Adaptive Test

ERIC Educational Resources Information Center

Ho, Tsung-Han; Dodd, Barbara G.

2012-01-01

In this study we compared five item selection procedures using three ability estimation methods in the context of a mixed-format adaptive test based on the generalized partial credit model. The item selection procedures used were maximum posterior weighted information, maximum expected information, maximum posterior weighted Kullback-Leibler…

A High Performance Frequency Standard and Distribution System for Cassini Ka-Band Experiment

DTIC Science & Technology

2005-08-01

Orthogonal Polarization In Anisotropic Dielectric Resonators”, Proceedings of the 2002 IEEE International Frequency Control Symposium , pp. 553-558...2002. [9] G. J. Dick, Rabi T. Wang, Robert Tjoelker, “Design and Progress Report for Compact Cryocooled Sapphire Oscillator "VCSO"”, Proc. 2005 Joint...IEEE FCS/ PTTI. [10] R. Basu, G. J. Dick, Rabi T. Wang,” Novel Design of an All- Cryogenic RF Pound Circuit “,Proc. 2005 Joint IEEE FCS/ PTTI

Hierarchical Organization for Large, Dynamic Radio Networks.

DTIC Science & Technology

1988-01-01

January 1985. [3] N. Shacharm and J. Tornow . Future Directions in Packet Radio Technology. In - Proc. of IEEE INFOCOM󈨙, Washington, D.C., 1985. [4] J.J...Freeman and Company, 1979. [7] J. Jubin and J. Tornow . The DARPA Packet Radio Network Protocols. Proceed- inga of the IEEE, 75(1):21-32, January 1987... Tornow . Future Directions in Packet Radio Technology. In Proc. of IEEE INFOCOM󈨙, Washington, D.C., 1985. [28] N. Shacham and J. Westcott. Future

Coherent Structures and Chaos Control in High-Power Microwave and Charged-Particle Beam Devices

DTIC Science & Technology

2009-01-31

34Equilibrium Theory of an Intense Elliptic Beam for High - Power Ribbon-Beam Klystron Applications," Proc. 2007 Part. Accel. Conf. p. 2316. Courant...34Equilibrium Theory of an Intense Elliptic Beam for High - Power Ribbon-Beam Klystron Applications," C. Chen and J. Zhou, Proc. 2007 Part. Accel. Conf. (2007...accelerator focusing systems. Over 600 high - power , high -efficiency klystrons , for example, may be needed to provide rf power for the acceleration

An Experimental and Theoretical Investigation of Optogalvanic Effects.

DTIC Science & Technology

1987-12-01

Discharge Plasmas" at Atholl Palace Hotel, Pitlochry, Scotland, June 23-July 5 (1985). Published in Radiative Processes in Discharge Plasmas, edited by J...and 8 are taken from Phelps.39 The temperature dependence of D is taken from Buckingham and Dalgarno, that of Y is taken from Allison, Browne and...1307 (1955). 40. R. A. Buckingham , and A. Dalgarno, Proc. Roy. Soc. (London) A213, 506 (1952). 41. D. C. Allison, J. C. Browne, and A. Dalgarno, Proc

A State-of-the-Art Assessment of Automatic Name Placement.

DTIC Science & Technology

1986-08-01

develop an automatic name placement system. 11 Balodis, M., "Positioning of typography on maps," Proc. ACSM Pall Con- vention, Salt Lake City, Utah, Sept...1983, pp. 28-44. This article deals with the selection of typography for maps. It describes psycho-visual experiments with groups of individuals to...Polytechnic Institute, Troy, NY 12181, May 1984. (Also available as Tech. Rept. IPL-TR-063.) SBalodis, M., "Positioning of typography on maps," Proc

URREF Reliability Versus Credibility in Information Fusion

DTIC Science & Technology

2013-07-01

Fusion, Vol. 3, No. 2, December, 2008. [31] E. Blasch, J. Dezert, and P. Valin , “DSMT Applied to Seismic and Acoustic Sensor Fusion,” Proc. IEEE Nat...44] E. Blasch, P. Valin , E. Bossé, “Measures of Effectiveness for High- Level Fusion,” Int. Conference on Information Fusion, 2010. [45] X. Mei, H...and P. Valin , “Information Fusion Measures of Effectiveness (MOE) for Decision Support,” Proc. SPIE 8050, 2011. [49] Y. Zheng, W. Dong, and E

Knowledge-Based Vision Techniques for the Autonomous Land Vehicle Program

DTIC Science & Technology

1991-10-01

Knowledge System The CKS is an object-oriented knowledge database that was originally designed to serve as the central information manager for a...34 Representation Space: An Approach to the Integra- tion of Visual Information ," Proc. of DARPA Image Understanding Workshop, Palo Alto, CA, pp. 263-272, May 1989...Strat, " Information Management in a Sensor-Based Au- tonomous System," Proc. DARPA Image Understanding Workshop, University of Southern CA, Vol.1, pp

Two-year controlled effectiveness trial of a school-based intervention to prevent obesity in Chilean children.

PubMed

Kain, Juliana; Leyton, Barbara; Cerda, Ricardo; Vio, Fernando; Uauy, Ricardo

2009-09-01

Obesity prevalence among Chilean children is 19.4%. The present study aimed to assess the effectiveness of a school-based obesity prevention programme. Non-randomized controlled study. The intervention included activities in nutrition and physical activity, fully applied the first year and partially in the second one. Primary outcomes were BMI Z-score (BMIZ) and obesity prevalence; secondary outcomes were waist circumference and triceps skinfold thickness. Time effects were assessed by changes in BMI-related variables by gender and period (ANOVA and Tukey test), while intervention effects were determined by comparing changes in (i) obesity prevalence by gender and period (PROC GENMOD) and (ii) BMIZ according gender, age and period (PROC MIXED). Primary schools in the Chilean cities of Casablanca (intervention group) and Quillota (control group). One thousand seven hundred and fifty-nine children from three schools (intervention group) and 671 from one school (control group). Over the two years, obesity prevalence and BMIZ declined significantly in the intervention group; from 17.0% to 12.3% and 14.1% to 10.3% in boys and girls, respectively, and from 0.62 to 0.53 and 0.64 to 0.58, respectively. In the control group, obesity remained stable at about 21% and 15%, while BMIZ increased significantly in the second year. BMIZ declined in both genders and all age categories in the intervention group during the first year (significant only in younger boys). No changes occurred during the summer, while during the second year, BMIZ increased in boys and girls from both groups (significant only in the younger control boys). Obesity declined significantly only in boys during the first year. Effectiveness was greater in the first school year and more evident in younger boys.

Novel Random Mutagenesis Method for Directed Evolution.

PubMed

Feng, Hong; Wang, Hai-Yan; Zhao, Hong-Yan

2017-01-01

Directed evolution is a powerful strategy for gene mutagenesis, and has been used for protein engineering both in scientific research and in the biotechnology industry. The routine method for directed evolution was developed by Stemmer in 1994 (Stemmer, Proc Natl Acad Sci USA 91, 10747-10751, 1994; Stemmer, Nature 370, 389-391, 1994). Since then, various methods have been introduced, each of which has advantages and limitations depending upon the targeted genes and procedure. In this chapter, a novel alternative directed evolution method which combines mutagenesis PCR with dITP and fragmentation by endonuclease V is described. The kanamycin resistance gene is used as a reporter gene to verify the novel method for directed evolution. This method for directed evolution has been demonstrated to be efficient, reproducible, and easy to manipulate in practice.

Challenges of anamorphic high-NA lithography and mask making

NASA Astrophysics Data System (ADS)

Hsu, Stephen D.; Liu, Jingjing

2017-06-01

Chip makers are actively working on the adoption of 0.33 numerical aperture (NA) EUV scanners for the 7-nm and 5-nm nodes (B. Turko, S. L. Carson, A. Lio, T. Liang, M. Phillips, et al., in `Proc. SPIE9776, Extreme Ultraviolet (EUV) Lithography VII', vol. 977602 (2016) doi: 10.1117/12.2225014; A. Lio, in `Proc. SPIE9776, Extreme Ultraviolet (EUV) Lithography VII', vol. 97760V (2016) doi: 10.1117/12.2225017). In the meantime, leading foundries and integrated device manufacturers are starting to investigate patterning options beyond the 5-nm node (O. Wood, S. Raghunathan, P. Mangat, V. Philipsen, V. Luong, et al., in `Proc. SPIE. 9422, Extreme Ultraviolet (EUV) Lithography VI', vol. 94220I (2015) doi: 10.1117/12.2085022). To minimize the cost and process complexity of multiple patterning beyond the 5-nm node, EUV high-NA single-exposure patterning is a preferred method over EUV double patterning (O. Wood, S. Raghunathan, P. Mangat, V. Philipsen, V. Luong, et al., in `Proc. SPIE. 9422, Extreme Ultraviolet (EUV) Lithography VI', vol. 94220I (2015) doi: 10.1117/12.2085022; J. van Schoot, K. van Ingen Schenau, G. Bottiglieri, K. Troost, J. Zimmerman, et al., `Proc. SPIE. 9776, Extreme Ultraviolet (EUV) Lithography VII', vol. 97761I (2016) doi: 10.1117/12.2220150). The EUV high-NA scanner equipped with a projection lens of 0.55 NA is designed to support resolutions below 10 nm. The high-NA system is beneficial for enhancing resolution, minimizing mask proximity correction bias, improving normalized image log slope (NILS), and controlling CD uniformity (CDU). However, increasing NA from 0.33 to 0.55 reduces the depth of focus (DOF) significantly. Therefore, the source mask optimization (SMO) with sub-resolution assist features (SRAFs) are needed to increase DOF to meet the demanding full chip process control requirements (S. Hsu, R. Howell, J. Jia, H.-Y. Liu, K. Gronlund, et al., EUV `Proc. SPIE9048, Extreme Ultraviolet (EUV) Lithography VI', (2015) doi: 10.1117/12.2086074). To ensure no assist feature printing, the assist feature sizes need to be scaled with λ/NA. The extremely small SRAF width (below 25 nm on the reticle) is difficult to fabricate across the full reticle. In this paper, we introduce an innovative `attenuated SRAF' to improve SRAF manufacturability and still maintain the process window benefit. A new mask fabrication process is proposed to use existing mask-making capability to manufacture the attenuated SRAFs. The high-NA EUV system utilizes anamorphic reduction; 4× in the horizontal (slit) direction and 8× in the vertical (scanning) direction (J. van Schoot, K. van Ingen Schenau, G. Bottiglieri, K. Troost, J. Zimmerman, et al., `Proc. SPIE. 9776, Extreme Ultraviolet (EUV) Lithography VII', vol. 97761I (2016) doi: 10.1117/12.2220150; B. Kneer, S. Migura, W. Kaiser, J. T. Neumann, J. van Schoot, in `Proc. SPIE9422, Extreme Ultraviolet (EUV) Lithography VI', vol. 94221G (2015) doi: 10.1117/12.2175488). For an anamorphic system, the magnification has an angular dependency, and thus, familiar mask specifications such as mask error factor (MEF) need to be redefined. Similarly, mask-manufacturing rule check (MRC) needs to consider feature orientation.

Nucleic-acid characterization of the identity and activity of subsurface microorganisms

NASA Astrophysics Data System (ADS)

Madsen, E. L.

Nucleic-acid approaches to characterizing naturally occurring microorganisms in their habitats have risen to prominence during the last decade. Extraction of deoxyribonucleic-acid (DNA) and ribonucleic-acid (RNA) biomarkers directly from environmental samples provides a new means of gathering information in microbial ecology. This review article defines: (1) the subsurface habitat; (2) what nucleic-acid procedures are; and (3) the types of information nucleic-acid procedures can and cannot reveal. Recent literature examining microbial nucleic acids in the terrestrial subsurface is tabulated and reviewed. The majority of effort to date has focused upon insights into the identity and phylogeny of subsurface microorganisms afforded by analysis of their 16S rRNA genes. Given the power of nucleic-acid-based procedures and their limited application to subsurface habitats to date, many future opportunities await exploration. Au cours des derniers dix ans, les approches basées sur les acides nucléiques sont apparues et devenues essentielles pour caractériser dans leurs habitats les microorganismes existant à l'état naturel. L'extraction directe de l'ADN et de l'ARN, qui sont des biomarqueurs, d'échantillons environnementaux a fourni un nouveau moyen d'obtenir des informations sur l'écologie microbienne. Cet article synthétique définit 1) l'habitat souterrain, 2) ce que sont les procédures basées sur les acides nucléiques, 3) quel type d'informations ces procéedures peuvent et ne peuvent pas révéler. Les travaux récemment publiés concernatn les acides nucléiques microbiens dans le milieu souterrain terrestre sont catalogués et passés en revue. La majorité des efforts pour obtenir es données s'est concentrée sur l'identité et la phylogénie des microorganismes souterrains fournies par l'analyse de leurs gènes 16S rRNA. Étant donné la puissance des procédures basées sur les acides nucléiques et leur application limitée aux habitats souterrains pour obtenir des données, de nombreuses futures occasions sont dans l'attente d'explorations. Los métodos basados en ácidos nucleicos para la caracterización de microorganismos en sus propios hábitats han experimentado un gran auge en la última década. La extracción directa en muestras de los biomarcadores ácido desoxirribonucleico (ADN) y ribonucleico (ARN) supone un nuevo método para obtener información sobre ecología microbiana. En este articulo se definen: (1) el nuevo métidi para obtener información sobre ecología microbiana. En este artículo se definen: (1) el hábitat subsuperficial; (2) qué son los métodos basados en ácidos nucleicos; y (3) la información que estos métodos pueden proporcionar. Se revisa y tabula la bibliografía reciente sobre ácidos nucleicos microbianos en la subsuperficie. Hasta ahora la mayoría de estos estudios se han centrado en la identificación y filogenia de los microorganismos, mediante el análisis de sus genes 16S rRNA. Dado el potencial de las técnicas basadas en ácidos nucleicos y el hecho de que hasta ahora su aplicación a los hábitats subsuperficiales haya sido limitada, se presentan muchas opotunidades de futuro.

Influence of mixing procedure on robustness of self-consolidating concrete.

DOT National Transportation Integrated Search

2014-08-01

Self-Consolidating Concrete is, in the fresh state, more sensitive to small variations in the constituent elements and the mixing : procedure compared to Conventional Vibrated Concrete. Several studies have been performed recently to identify robustn...

Designing Recycled Hot Mix Asphalt Mixtures Using Superpave Technology

DOT National Transportation Integrated Search

1997-01-01

Mix design procedures for recycled asphalt pavements require the selection of : virgin asphalt binder or recycling agent. This research project was undertaken : to develop a procedure for selecting the performance grade (PG) of virgin : asphalt binde...

Selection of Human Antibody Fragments Which Bind Novel Breast Tumor Antigens

DTIC Science & Technology

1998-09-01

chain Fv analogue produced in Escherichia coli. Proc Natl Acad Sci U S A. 85: 5879-83. 11. Adams, G.P., McCartney, J.E., Tai, M.-S., Oppermann, H...antidigoxin single-chain Fv analogue produced in E coil. Proc NailAcadSci Bernard Foundation, the Frank Strick Foundation and the USA 85:5879-5883 CaPCURE...recovery of infectious phage was increased by preincubation of cells with chloroquine . Measurement of phage recovery from within the cytosol as a

Interfacial Layer Effects in Ba(1-x)Sr(x)TiO3 Thick Films Prepared by Plasma Spray

DTIC Science & Technology

2003-04-01

in Materials Development for Direct Write technologies, edited by D. B. Chrisey, D. R. Gamota, H . Helvajian , and D. P. Taylor, (Mater. Res. Soc. Proc...Direct Write technologies, edited by D. B. Chrisey, D. R. Gamota, H . Helvajian , and D. P. Taylor, (Mater. Res. Soc. Proc. 624, San Francisco, CA, 2000...Research Center at Northwestern University supported by the MRSEC program under a NSF grant (DMR-0076097). REFERENCES 1. K. H . Church, C. Fore, T. Feeley

System M: A Program Logic for Code Sandboxing and Identification

DTIC Science & Technology

2014-07-22

M. Ryan. Attack, solution and verification for shared authorisation data in TCG TPM. In Proc. FAST’09, 2010. [8] A. Datta, A. Derek, J. C. Mitchell...11] S. Delaune, S. Kremer, M. D. Ryan, and G. Steel. A formal analysis of authentication in the TPM. In Proc. FAST’10, 2011. [12] S. Delaune, S...A. Jeffrey. Authenticity by typing for security protocols. Journal of Computer Security, 11(4):451–519, July 2003. [16] S. Gürgens, C. Rudolph, D

A Guide to Electrical Insulation Design in Aerospace Vehicles for a Broad Range of Environmental Parameter Space

DTIC Science & Technology

2010-03-01

as an example with information from Llewellyn Jones (1939) [30] and from Meek (1978), pg. 233 [7]. Morokuma (1969) [31] varied the surface potential...breakdown in high pressure gases,” Phys. Rev. A, 21, 2069. 13. Dutton, J., Llewellyn Jones , F., and Palmer, R.W., (1961), Proc. Phys. Soc. 78, 569...breakdown and insulators in compressed gas,” IEE Proc. 128, 303. 30. Llewellyn Jones , F. (1939), Phil. Mag. 28, 192. 31. Morokuma, Y., Nakamura, Y., and

Regulation & Development of Membrane Transport Processes.

DTIC Science & Technology

1985-05-15

221, 733-741. 30. Liu, A. Y. C. and Greengard, P. (1974) Proc. Nall. Acad. Sci. USA, 71, 3869-3873. 31. MacKnight, A. D. C., DiBona , D. R., and Leaf...However, DiBona and Sachs and their collaborators 2. IXO(YI’(YI’IC INSEITION OF OTHER TANSPORT SYSTEMS 155 have challenged this view, suggesting that...the U.S. Public Health Service. REFERENCES I. DiBona , D. R., Ito, S., Berglindh, T.. and Sachs, G. (1979) Proc. Nall. Acad. Sci. USA, 76, 6689-6693. 2

A Lightweight Intelligent Virtual Cinematography System for Machinima Production

DTIC Science & Technology

2007-01-01

portmanteau of machine and cinema , machinima refers to the innovation of leveraging video game technology to greatly ease the creation of computer...selecting camera angles to capture the action of an a priori unknown script as aesthetically appropriate cinema . There are a number of challenges therein...Proc. of the 4th International Conf. on Autonomous Agents. Young, R.M. and Riedl, M.O. 2003. Towards an Architecture for Intelligent Control of Narrative in Interactive Virtual Worlds. In Proc. of IUI 2003.

Implementation of a Fault Tolerant Control Unit within an FPGA for Space Applications

DTIC Science & Technology

2006-12-01

Conference 2002, September 2002. [20] M. Alderighi, A. Candelori, F. Casini, S. D’Angelo, M. Mancini, A. Paccagnella, S. Pastore , G.R. Sechi, “Heavy...Luigi Carro and Ricardo Reis , “Designing and Testing Fault-Tolerant Techniques for SRAM-based FPGAs,” in Proc. 1st Conference on Computer Frontiers, pp...susceptibility,” in IEEE Proc. 12th IEEE Intl. Symposium on On-Line Testing, pp. 89-91, 2006. [45] Fernanda Lima, Luigi Carro and Ricardo Reis

Linear morphological stability analysis of the solid-liquid interface in rapidsolidification of a binary system

NASA Astrophysics Data System (ADS)

Galenko, P. K.; Danilov, D. A.

2004-05-01

The interface stability against small perturbations of the planar solid-liquid interface is considered analytically in linear approximation. Following the analytical procedure of Trivedi and Kurz [

Implicit constitutive models with a thermodynamic basis: a study of stress concentration

NASA Astrophysics Data System (ADS)

Bridges, C.; Rajagopal, K. R.

2015-02-01

Motivated by the recent generalization of the class of elastic bodies by Rajagopal (Appl Math 48:279-319, 2003), there have been several recent studies that have been carried out within the context of this new class. Rajagopal and Srinivasa (Proc R Soc Ser A 463:357-367, 2007, Proc R Soc Ser A: Math Phys Eng Sci 465:493-500, 2009) provided a thermodynamic basis for such models and appealing to the idea that rate of entropy production ought to be maximized they developed nonlinear rate equations of the form where T is the Cauchy stress and D is the stretching tensor as well as , where S is the Piola-Kirchhoff stress tensor and E is the Green-St. Venant strain tensor. We follow a similar procedure by utilizing the Gibb's potential and the left stretch tensor V from the Polar Decomposition of the deformation gradient, and we show that when the displacement gradient is small one arrives at constitutive relations of the form . This is, of course, in stark contrast to traditional elasticity wherein one obtains a single model, Hooke's law, when the displacement gradient is small. By solving a classical boundary value problem, with a particular form for f( T), we show that when the stresses are small, the strains are also small which is in agreement with traditional elasticity. However, within the context of our model, when the stress blows up the strains remain small, unlike the implications of Hooke's law. We use this model to study boundary value problems in annular domains to illustrate its efficacy.

Critical review of ADOT's hot mix asphalt specifications : final report 630.

DOT National Transportation Integrated Search

2008-12-01

The Arizona Department of Transportation (ADOT) has developed specifications and procedures to : ensure the quality of the hot mix asphalt materials purchased by the Department. The document : recording these specifications and procedures is the Stan...

Method and system for turbomachinery surge detection

DOEpatents

Faymon, David K.; Mays, Darrell C.; Xiong, Yufei

2004-11-23

A method and system for surge detection within a gas turbine engine, comprises: measuring the compressor discharge pressure (CDP) of the gas turbine over a period of time; determining a time derivative (CDP.sub.D ) of the measured (CDP) correcting the CDP.sub.D for altitude, (CDP.sub.DCOR); estimating a short-term average of CDP.sub.DCOR.sup.2 ; estimating a short-term average of CDP.sub.DCOR ; and determining a short-term variance of corrected CDP rate of change (CDP.sub.roc) based upon the short-term average of CDP.sub.DCOR and the short-term average of CDP.sub.DCOR.sup.2. The method and system then compares the short-term variance of corrected CDP rate of change with a pre-determined threshold (CDP.sub.proc) and signals an output when CDP.sub.roc >CDP.sub.proc. The method and system provides a signal of a surge within the gas turbine engine when CDP.sub.roc remains>CDP.sub.proc for pre-determined period of time.

A comparison of methods of fitting several models to nutritional response data.

PubMed

Vedenov, D; Pesti, G M

2008-02-01

A variety of models have been proposed to fit nutritional input-output response data. The models are typically nonlinear; therefore, fitting the models usually requires sophisticated statistical software and training to use it. An alternative tool for fitting nutritional response models was developed by using widely available and easier-to-use Microsoft Excel software. The tool, implemented as an Excel workbook (NRM.xls), allows simultaneous fitting and side-by-side comparisons of several popular models. This study compared the results produced by the tool we developed and PROC NLIN of SAS. The models compared were the broken line (ascending linear and quadratic segments), saturation kinetics, 4-parameter logistics, sigmoidal, and exponential models. The NRM.xls workbook provided results nearly identical to those of PROC NLIN. Furthermore, the workbook successfully fit several models that failed to converge in PROC NLIN. Two data sets were used as examples to compare fits by the different models. The results suggest that no particular nonlinear model is necessarily best for all nutritional response data.

Relationships between dry matter content, ensiling, ammonia-nitrogen, and ruminal in vitro starch digestibility in high-moisture corn samples.

PubMed

Ferraretto, L F; Taysom, K; Taysom, D M; Shaver, R D; Hoffman, P C

2014-05-01

The objectives of the study were (1) to determine relationships between high-moisture corn (HMC) dry matter (DM), ammonia-N [% of crude protein (CP)], and soluble CP concentrations, and pH, with 7-h ruminal in vitro starch digestibility (ivStarchD), and (2) to evaluate the effect of ensiling on pH, ammonia-N, soluble CP, and ivStarchD measurements in HMC. A data set comprising 6,131 HMC samples (55 to 80% DM) obtained from a commercial feed analysis laboratory was used for this study. Month of sample submittal was assumed to be associated with length of the ensiling period. Data for month of sample submittal were analyzed using Proc Mixed in SAS (SAS Institute Inc., Cary, NC) with month as a fixed effect. Regressions to determine linear and quadratic relationships between ivStarchD and ammonia-N, soluble CP, pH, and DM content were performed using Proc Mixed. The ivStarchD increased by 9 percentage units from October to August of the following year. Similar results were observed for ammonia-N and soluble CP with increases from 1.8 to 4.6% of CP and 31.3 to 46.4% of CP, respectively, from October to August of the following year. Ammonia-N was positively related to ivStarchD (R(2)=0.61). The DM content of HMC at silo removal was negatively related (R(2)=0.47) to ivStarchD with a decrease of 1.6 percentage units in ivStarchD per 1-percentage-unit increase in DM content. The pH of HMC was negatively related to ammonia-N (R(2)=0.53), soluble CP (R(2)=0.57), and ivStarchD (R(2)=0.51). Combined, ammonia-N, DM, soluble CP, and pH provided a good prediction of ivStarchD (adjusted R(2)=0.70). Increasing pH, ammonia-N, soluble CP, and ivStarchD values indicate that HMC may need up to 10 mo of ensiling to reach maximum starch digestibility. Ammonia-N, DM content, soluble CP concentration, and pH are good indicators of ruminal in vitro starch digestibility for high-moisture corn. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Using mixed methods effectively in prevention science: designs, procedures, and examples.

PubMed

Zhang, Wanqing; Watanabe-Galloway, Shinobu

2014-10-01

There is growing interest in using a combination of quantitative and qualitative methods to generate evidence about the effectiveness of health prevention, services, and intervention programs. With the emerging importance of mixed methods research across the social and health sciences, there has been an increased recognition of the value of using mixed methods for addressing research questions in different disciplines. We illustrate the mixed methods approach in prevention research, showing design procedures used in several published research articles. In this paper, we focused on two commonly used mixed methods designs: concurrent and sequential mixed methods designs. We discuss the types of mixed methods designs, the reasons for, and advantages of using a particular type of design, and the procedures of qualitative and quantitative data collection and integration. The studies reviewed in this paper show that the essence of qualitative research is to explore complex dynamic phenomena in prevention science, and the advantage of using mixed methods is that quantitative data can yield generalizable results and qualitative data can provide extensive insights. However, the emphasis of methodological rigor in a mixed methods application also requires considerable expertise in both qualitative and quantitative methods. Besides the necessary skills and effective interdisciplinary collaboration, this combined approach also requires an open-mindedness and reflection from the involved researchers.

Development of a base mix design procedure.

DOT National Transportation Integrated Search

1974-01-01

This paper reports an investigation into the development of a compaction procedure for base mixes containing aggregates of 1 1/2" (38 mm) maximum size. The specimens were made in a manner similar to that given in ASTM Designation 1561-71, except that...

Effects of mixing procedure itself on the structure, viscosity, and spreadability of white petrolatum and salicylic acid ointment and the skin permeation of salicylic acid.

PubMed

Kitagawa, Shuji; Fujiwara, Megumi; Okinaka, Yuta; Yutani, Reiko; Teraoka, Reiko

2015-01-01

White petrolatum is a mixture of solid and liquid hydrocarbons and its structure can be affected by shear stress. Thus, it might also induce changes in its rheological properties. In this study, we used polarization microscopy to investigate how different mixing methods affect the structure of white petrolatum. We used two different mixing methods, mixing using a rotation/revolution mixer and mixing using an ointment slab and an ointment spatula. The extent of the fragmentation and dispersal of the solid portion of white petrolatum depended on the mixing conditions. Next, we examined the changes in the structure of a salicylic acid ointment, in which white petrolatum was used as a base, induced by mixing and found that the salicylic acid solids within the ointment were also dispersed. In addition to these structural changes, the viscosity and thixotropic behavior of both test substances also decreased in a mixing condition-dependent manner. The reductions in these parameters were most marked after mixing with a rotation/revolution mixer, and similar results were obtained for spreadability. We also investigated the effects of mixing procedure on the skin accumulation and permeation of salicylic acid. They were increased by approximately three-fold after mixing. Little difference in skin accumulation or permeation was detected between the two mixing methods. These findings indicate that mixing procedures themselves affect the utility and physiological effects of white petrolatum-based ointments. Therefore, these effects should be considered when mixing is required for the clinical use of petrolatum-based ointments.

The statistical model of origin and evolution planets of Solar system and planetary satellities

NASA Astrophysics Data System (ADS)

Krot, A.

There are the theories for exploring Solar system formation in accord Titius-Bode's low: electromagnetic theories (Birkeland (1912), Alfven (1942)), gravitational theories (Schmidt (1944), Woolfson (1964), Safronov (1969), Dole (1970)), nebular theories (Weizsaecker (1943), Kuiper (1949), Nakano (1970)) [1]-[3]. In spite of great number of work aimed to exploring formation of the Solar system, however, the mentioned theories were not able to explain all phenomena. In this connection the statistical theory for a cosmological body forming (so-called the spheroidal body model) has been proposed in [4]-[11]. Within the framework of this theory, bodies have fuzzy outlines and are represented by means of spheroidal forms. In the work [6], which is a continuation of the papers [4], [5], it has been investigated a slowly evolving in time process of a gravitational compression of a spheroidal body close to an unstable equilibrium state. In the papers [7],[8]the equation of motion of particles inside the weakly gravitating spheroidal body modeled by means of an ideal liquid has been obtained. Using Schwarzschild's and Kerr's metrics a consistency of the proposed statistical model with the general relativity has been shown in [12]. The proposed theory proceeds from the conception for forming a spheroidal body as a protoplanet from planetary nebula; it permits to derive the form of distribution functions for an immovable and rotating spheroidal body [4]-[6],[10]-[13] as well as their density masses (gravitational potentials and strengths) and also to find the distribution function of specific angular momentum of the rotating uniformly spheroidal body [13],[14]. Using the specific angular momentum distribution function this work considers a gas- dust protoplanetary cloud as a rotating and gravitating spheroidal body. Because the specific angular momenta are averaged during conglomeration process the specific angular momenta for a planets of Solar system is found. As a result a new low for Solar system planetary distances is derived (it generalizes the well-known Schmidt low). The new low gives a very good estimation of real planetary distances in Solar system (the relative error of estimation is 0%; absolute error of estimation is 0,5% besides its maximal value is equal to 5% for Earth and Pluto). This low has been applied also to estimation of Jupiter's satellities distances in this work. References: [1] M.M.Nieto, The Tutius-Bode low of planetary distances: its his-tory and theory. Pergamon: Oxford, New York et., 1972. [2] V.S. Safronov, Evolution of Protoplanetary cloud and the formation of the Earth and planets. 1969, Moscow, Nauka, (in Russian); NASA Tech. Transl. F-677, Washington, D.C. 1972. [3] A.V. Vityazev, G.V. Pechrnikova and V.S.Safronov, The Terrestrial planets: origin and early evolution. 1990. Moscow, Nauka (in Russian) [4] A.M.Krot, Achievement in Modern Radioelectronics (Special issue "Cosmic Radiophysics", Moscow), no.8, pp.66-81, 1996 (in Russian). [5] A.M.Krot, Proc. SPIE's 13th Annual Intern.Symp. "AeroSense", vol.3710, pp.1248-1259, Orlando, Florida, USA, April 5-9, 1999. [6] A.M.Krot, Proc. SPIE's 14th Annual Intern.Symp. "AeroSense", vol.4038, pp.1318-1329, Orlando, Florida, USA, April 24-28, 2000. [7] A.M.Krot, Proc. SPIE's 15th Annual Intern. Symposium "AeroSense", vol.4394, pp.1271-1282, Orlando, Florida, USA, April 16-20, 2001. [8] A.M.Krot, Proc. 53rd Intern. Astronautical Congress: The World Space Congress-2002, Houston, Texas, USA, October 10-19, 2002, Preprint IAC-02-J.P.01. - 11 p. [9] A.M.Krot, Proc. 34th Scientific Assembly of the Committee on Space Research (COSPAR)- The 2nd World Space Congress (WSC- 2002), October 10-19, 2002,Houston, Texas, USA. [10] A.M.Krot, Proc. of EGS- AGU-EUG Joint Assembly, Nice, France, April 6-11, 2003, Geophysical Research Abstracts, vol.5, EAE03-À-05568, 2003. [11] A.M. Krot, Proc. of 54 Intern. Astronautical Congress (IAC), September 29-October 3, 2003, Bremen, Germany, Preprint IAC-03-J.1.08. -11p. [12] A.M.Krot , Proc. of 35th COSPAR Scientific Assembly, Paris, France, July 18-25, 2004, Abstract-Nr. COSPAR 04-A-00162. [13] A.Krot, Proc. EGU- 2nd General Assembly, Vienna, Austria, April 24-29, 2005, Geophysical Research Abstracts, vol.7, EGU05-A-04550, 2005; SRef-ID: 1607-7962/gra/. [14] A.Krot Proc. EGU- General Assembly, Vienna, Austria, April 02- 07, 2006, Geophysical Research Abstracts, vol.8, EGU06-A-00216, 2006; SRef-ID: 1607-7962/gra/. 2

A Methodology for Conducting Integrative Mixed Methods Research and Data Analyses

PubMed Central

Castro, Felipe González; Kellison, Joshua G.; Boyd, Stephen J.; Kopak, Albert

2011-01-01

Mixed methods research has gained visibility within the last few years, although limitations persist regarding the scientific caliber of certain mixed methods research designs and methods. The need exists for rigorous mixed methods designs that integrate various data analytic procedures for a seamless transfer of evidence across qualitative and quantitative modalities. Such designs can offer the strength of confirmatory results drawn from quantitative multivariate analyses, along with “deep structure” explanatory descriptions as drawn from qualitative analyses. This article presents evidence generated from over a decade of pilot research in developing an integrative mixed methods methodology. It presents a conceptual framework and methodological and data analytic procedures for conducting mixed methods research studies, and it also presents illustrative examples from the authors' ongoing integrative mixed methods research studies. PMID:22167325

Mixing medication into foodstuffs: identifying the issues for paediatric nurses.

PubMed

Akram, Gazala; Mullen, Alex B

2015-04-01

Medication is often mixed into soft foods to aid swallowing in children. However, this can alter the physical/chemical properties of the active drug. This study reports on the prevalence of the modification procedure, the nature of foodstuffs routinely used and factors which influence how the procedure is performed by nurses working in the National Health Service in Scotland. Mixed methods were employed encompassing an online self-administered questionnaire and semi-structured interviews. One hundred and eleven nurses participated, of whom 87% had modified medication prior to administration. Fruit juice (diluted and concentrated) and yoghurts were most commonly used. The interviews (i) identified the limitations of the procedure; (ii) explored the decision-making process; and (iii) confirmed the procedure was a last resort. This study intends to address some of the uncertainty surrounding the medicine modification procedure within the paediatric population. © 2013 Wiley Publishing Asia Pty Ltd.

Clinical endometritis in an Argentinean herd of dairy cows: risk factors and reproductive efficiency.

PubMed

Giuliodori, M J; Magnasco, R P; Becu-Villalobos, D; Lacau-Mengido, I M; Risco, C A; de la Sota, R L

2013-01-01

The objectives of this study were to assess the clinical and metabolic risk factors for clinical endometritis, the likelihood for having a normal vaginal discharge during postpartum, and the effects of endometritis on milk yield, reproductive efficiency, and metabolic status in Holstein cows. The study was conducted in a commercial dairy herd (Cordoba, Argentina) where 303 Holstein cows were enrolled. Cows were body condition scored (1 to 5) and tail bled on -14, 7, 21, 31, 41, and 50 d relative to parturition. Cows having a vaginal discharge with presence of pus between 21 and 41 d postpartum (dpp) were diagnosed as having clinical endometritis. Plasma blood samples were analyzed for nonesterified fatty acids (NEFA), β-hydroxybutyrate (BHBA), and blood urea nitrogen using commercial kits and insulin-like growth factor 1, insulin, and leptin by RIA. Data were analyzed with PROC MIXED, PROC GENMOD, and PROC PHREG of SAS (SAS Institute Inc., Cary, NC). Abnormal calving and puerperal metritis increased the risk for endometritis [adjusted odds ratio (AOR)=2.21 for both]. High prepartum NEFA and high postpartum BHBA increased the risk for endometritis (AOR=1.003 and 1.001, respectively), whereas high prepartum blood urea nitrogen reduced it (AOR=0.853). Cut-offs of 456.6 μM NEFA and 402.5 μM BHBA had sensitivities of 0.69 and 0.58, and specificities of 0.88 and 0.86, respectively. The likelihood for having normal vaginal discharge increased with time (∼1% × dpp) and with normal calving. Cows with endometritis had higher milk yield than normal herdmates (27.8±0.9 vs. 25.7±0.4 kg/d), lower risk for pregnancy by 100 dpp (AOR=0.10), higher nonpregnancy risk by 200 dpp (AOR=2.87), and higher risk for culling than normal cows (AOR=2.28). Cows with endometritis had a lower hazard rate (0.44) for pregnancy and had approximately 70 d longer calving-to-conception intervals. Finally, endometritis had no effect on metabolic hormones. In conclusion, the risk for clinical endometritis increases with abnormal calving and puerperal metritis, as prepartum NEFA and postpartum BHBA concentrations increase. Prepartum NEFA and postpartum BHBA could be useful for the prediction of endometritis. Last, clinical endometritis has detrimental effects on reproductive efficiency, as affected cows take longer to get pregnant and are at higher risk for culling. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Determination of the in-place hot-mix asphalt layer modulus for rehabilitation projects using a mechanistic-empirical procedure.

DOT National Transportation Integrated Search

2006-01-01

This project evaluated the procedures proposed by the Mechanistic-Empirical Pavement Design Guide (MEPDG) to characterize existing hot-mix asphalt (HMA) layers for rehabilitation purposes. Thirty-three cores were extracted from nine sites in Virginia...

Development of test procedure for the design of black base : final report.

DOT National Transportation Integrated Search

1976-01-01

There is no standard design procedure available for black base mixes containing aggregates larger than 1" (25.4 mm) This investigation dealt with the use of stability testing equipment similar to that used in the design of surface mixes and developme...

University of Glasgow at TREC 2014: Experiments with Terrier in Contextual Suggestion, Temporal Summarisation and Web Tracks

DTIC Science & Technology

2014-11-01

Romain Deveaud, M-Dyaa Albakour, Stuart Mackie, Nut Limsopatham, Craig Macdonald, Iadh Ounis, Thibaut Thonet ⇤ and Bekir Taner Dinçer † {firstname.lastname...of Tor Vergata at TREC 2007 Blog track. In Proc. of TREC, 2007. [3] J . Aslam, M. Ekstrand-Abueg, V. Pavlu, F. Diaz, and T. Sakai. Trec 2013 temporal...selection based on prevalence and novelty. In Proc. of CIKM’14, 2014. [18] R. McCreadie, C. Macdonald, I. Ounis, J . Peng, and R. L. T. Santos. University of

Military Application of Space-Time Adaptive Processing (Les applications militaires du traitement adaptatif espace-temps)

DTIC Science & Technology

2003-04-01

La détection de cibles mobiles terrestres est l’un des objectifs primaires de la télédétection depuis la terre. Cependant, les retours de cible...Proc. EUSAR’96, 26-28 March 1996, Koenigswinter, Germany, pp. 49-52 ( VDE Publishers) [13] Ender, J., ”Detection and Estimation of Moving Target...Signals by Multi-Channel SAR”, Proc. EUSAR’96, 26-28 March 1996, Koenigswinter, Germany, pp. 411-417, ( VDE Publishers). Also: AEU, Vol. 50, March 1996, pp

Implementation of a Localization System for Sensor Networks

DTIC Science & Technology

2006-05-18

its N-point DFT is mathematically formulated as X[k] = N−1∑ n=0 x[n] W nkN , k = 0, 1, . . . , N − 1 (7.1) W knN = e −j(2π/N)kn (7.2) There are two...distributed ad-hoc wireless sensor networks. In Int. Conf. on Acoustics, Speech , and Signal Proc. (ICASSP), pages 2037 – 2040, Salt Lake City, UT. [18] J...Stability of recursive qrd-ls algorithms using finite- precision systolic array implementation. IEEE Trans. on Acoustics, Speech , and Signal Proc., 37(5

Validity of diagnoses, procedures, and laboratory data in Japanese administrative data.

PubMed

Yamana, Hayato; Moriwaki, Mutsuko; Horiguchi, Hiromasa; Kodan, Mariko; Fushimi, Kiyohide; Yasunaga, Hideo

2017-10-01

Validation of recorded data is a prerequisite for studies that utilize administrative databases. The present study evaluated the validity of diagnoses and procedure records in the Japanese Diagnosis Procedure Combination (DPC) data, along with laboratory test results in the newly-introduced Standardized Structured Medical Record Information Exchange (SS-MIX) data. Between November 2015 and February 2016, we conducted chart reviews of 315 patients hospitalized between April 2014 and March 2015 in four middle-sized acute-care hospitals in Shizuoka, Kochi, Fukuoka, and Saga Prefectures and used them as reference standards. The sensitivity and specificity of DPC data in identifying 16 diseases and 10 common procedures were identified. The accuracy of SS-MIX data for 13 laboratory test results was also examined. The specificity of diagnoses in the DPC data exceeded 96%, while the sensitivity was below 50% for seven diseases and variable across diseases. When limited to primary diagnoses, the sensitivity and specificity were 78.9% and 93.2%, respectively. The sensitivity of procedure records exceeded 90% for six procedures, and the specificity exceeded 90% for nine procedures. Agreement between the SS-MIX data and the chart reviews was above 95% for all 13 items. The validity of diagnoses and procedure records in the DPC data and laboratory results in the SS-MIX data was high in general, supporting their use in future studies. Copyright © 2017 The Authors. Production and hosting by Elsevier B.V. All rights reserved.

Tolerability of an equimolar mix of nitrous oxide and oxygen during painful procedures in very elderly patients.

PubMed

Bauer, Carole; Lahjibi-Paulet, Hayat; Somme, Dominique; Onody, Peter; Saint Jean, Olivier; Gisselbrecht, Mathilde

2007-01-01

Although an equimolar mix of nitrous oxide-oxygen (N(2)O/O(2)) [Kalinox] is widely used as an analgesic, there have been few specific studies of this product in the elderly. In this article, we investigate the tolerability of this equimolar mix in very elderly patients undergoing painful procedures. This was a prospective, observational study of patients hospitalised in the geriatric short-stay unit of a teaching hospital between July 2001 and September 2003. All patients aged >/=80 years who were scheduled for invasive care procedures were eligible for inclusion. Sixty-two patients were recruited and underwent a total of 68 procedures. The procedures were divided into four classes based on the degree of pain they were expected to cause and their duration. Patients received the equimolar N(2)O/O(2) mix (Kalinox) for 5 minutes before the beginning of the procedure and throughout its duration. The inhaled treatment was administered via a high-concentration mask. Assessments were carried out during the inhalation and over the 15 minute period following inhalation. The primary endpoint of the study was tolerability of the equimolar N(2)O/O(2) mix, and all adverse events were recorded. Secondary endpoints were the efficacy of the product (assessed on a verbal rating scale and/or the Doloplus scale), its ease of use and its acceptability to patients and staff. Fourteen patients (22.6%) each reported at least one adverse event: impaired hearing (n = 1), altered perception of the environment (n = 8), anxiety (n = 1), headache (n = 3) and drowsiness at the end of the procedure (n = 2). All these disorders subsided rapidly after treatment was completed. This study shows the favourable tolerability of the equimolar N(2)O/O(2) mix in very elderly subjects, which makes this product a valuable tool for the management of acute pain in this age group.

New generation HMA mix designs : accelerated pavement testing of a type C mix with the ALF machine.

DOT National Transportation Integrated Search

2012-09-01

Recent changes to the Texas hot-mix asphalt (HMA) mix-design procedures, such as the adaption of the higher-stiffer performance-grade asphalt-binder grades and the Hamburg test, have ensured that the mixes that are routinely used on Texas highways ar...

Economic appraisal of the angioplasty procedures performed in 2004 in a high-volume diagnostic and interventional cardiology unit.

PubMed

Manari, Antonio; Costa, Elena; Scivales, Alessandro; Ponzi, Patrizia; Di Stasi, Francesca; Guiducci, Vincenzo; Pignatelli, Gianluca; Giacometti, Paola

2007-10-01

Growing interest in the use of drug-eluting stents (DESs) in coronary angioplasty has prompted the Healthcare Agency of the Emilia Romagna Region to draw up recommendations for their appropriate clinical use in high-risk patients. Since the adoption of any new technology necessitates economic appraisal, we analysed the resource consumption of the various types of angioplasty procedures and the impact on the budget of a cardiology department. A retrospective economic appraisal was carried out on the coronary angioplasty procedures performed in 2004 in the Department of Interventional Cardiology of Reggio Emilia. On the basis of the principles of activity-based costing, detailed hospital costs were estimated for each procedure and compared with the relevant diagnosis-related group (DRG) reimbursement. In 2004, the Reggio Emilia hospital performed 806 angioplasty procedures for a total expenditure of euro 5,176,268. These were 93 plain old balloon angioplasty procedures (euro 487,329), 401 procedures with bare-metal stents (euro 2,380,071), 249 procedures with DESs (euro 1,827,386) and 63 mixed procedures (euro 481,480). Reimbursements amounted to euro 5,816,748 (11% from plain old balloon angioplasty, 50% from bare-metal stent, 31% from DES and 8% from mixed procedures) with a positive margin of about euro 680,480 between costs incurred and reimbursements obtained, even if the reimbursement for DES and mixed procedures was not covering all the incurred costs. Analysis of the case-mix of procedures revealed that an overall positive margin between costs and DRG reimbursements was achieved. It therefore emerges that adherence to the indications of the Healthcare Agency of the Emilia Romagna Region for the appropriate clinical use of DESs is economically sustainable from the hospital enterprise point of view, although the DRG reimbursements are not able to differentiate among resource consumptions owing to the adoption of innovative technologies.

Mix design procedure for crumb rubber modified hot mix asphalt.

DOT National Transportation Integrated Search

2005-06-01

To improve the performance of hot-mix asphalt concrete at high temperatures, crumb-rubber is typically used. Although hot-mix asphalt concrete consisting of crumb-rubber has been successfully placed and have performed well over the years, the laborat...

Delay Differential Equation-Based Modeling of Passively Mode-Locked Quantum Dot Lasers Using Measured Gain and Loss Spectra (Postprint)

DTIC Science & Technology

2013-01-01

semiconductor laser8, 9: ATAe d dA TQiTGi qg 12 11 2 1 (1) 2 0 1 AeeGgd dG GQ (2) Proc. of SPIE Vol. 8255 82551K-2 Downloaded From: http...1 Downloaded From: http://spiedigitallibrary.org/ on 01/14/2013 Terms of Use: http://spiedl.org/terms 1 Approved for public release; distribution...parameters ( 0g and 0q , respectively) have been derived to yield: Gg0 (10) Proc. of SPIE Vol. 8255 82551K-3 Downloaded From: http

What Do You Think You Are Measuring? A Mixed-Methods Procedure for Assessing the Content Validity of Test Items and Theory-Based Scaling

PubMed Central

Koller, Ingrid; Levenson, Michael R.; Glück, Judith

2017-01-01

The valid measurement of latent constructs is crucial for psychological research. Here, we present a mixed-methods procedure for improving the precision of construct definitions, determining the content validity of items, evaluating the representativeness of items for the target construct, generating test items, and analyzing items on a theoretical basis. To illustrate the mixed-methods content-scaling-structure (CSS) procedure, we analyze the Adult Self-Transcendence Inventory, a self-report measure of wisdom (ASTI, Levenson et al., 2005). A content-validity analysis of the ASTI items was used as the basis of psychometric analyses using multidimensional item response models (N = 1215). We found that the new procedure produced important suggestions concerning five subdimensions of the ASTI that were not identifiable using exploratory methods. The study shows that the application of the suggested procedure leads to a deeper understanding of latent constructs. It also demonstrates the advantages of theory-based item analysis. PMID:28270777

40 CFR Appendix 3 to Subpart A of... - Procedure for Mixing Base Fluids With Sediments

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Procedure for Mixing Base Fluids With Sediments 3 Appendix 3 to Subpart A of Part 435 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS OIL AND GAS EXTRACTION POINT SOURCE CATEGORY Offshore...

40 CFR Appendix 3 to Subpart A of... - Procedure for Mixing Base Fluids With Sediments

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Procedure for Mixing Base Fluids With Sediments 3 Appendix 3 to Subpart A of Part 435 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS OIL AND GAS EXTRACTION POINT SOURCE CATEGORY Offshore...

Bi-Factor MIRT Observed-Score Equating for Mixed-Format Tests

ERIC Educational Resources Information Center

Lee, Guemin; Lee, Won-Chan

2016-01-01

The main purposes of this study were to develop bi-factor multidimensional item response theory (BF-MIRT) observed-score equating procedures for mixed-format tests and to investigate relative appropriateness of the proposed procedures. Using data from a large-scale testing program, three types of pseudo data sets were formulated: matched samples,…

Installation report : rubber modified asphalt mix.

DOT National Transportation Integrated Search

1983-01-01

This report describes the design of an asphalt mix containing up to 3.0% closed cell waste rubber and a field installation of the mix. The Marshall design procedure was used to determine the asphalt content for the mix containing 3.0% rubber as well ...

Variable-free exploration of stochastic models: a gene regulatory network example.

PubMed

Erban, Radek; Frewen, Thomas A; Wang, Xiao; Elston, Timothy C; Coifman, Ronald; Nadler, Boaz; Kevrekidis, Ioannis G

2007-04-21

Finding coarse-grained, low-dimensional descriptions is an important task in the analysis of complex, stochastic models of gene regulatory networks. This task involves (a) identifying observables that best describe the state of these complex systems and (b) characterizing the dynamics of the observables. In a previous paper [R. Erban et al., J. Chem. Phys. 124, 084106 (2006)] the authors assumed that good observables were known a priori, and presented an equation-free approach to approximate coarse-grained quantities (i.e., effective drift and diffusion coefficients) that characterize the long-time behavior of the observables. Here we use diffusion maps [R. Coifman et al., Proc. Natl. Acad. Sci. U.S.A. 102, 7426 (2005)] to extract appropriate observables ("reduction coordinates") in an automated fashion; these involve the leading eigenvectors of a weighted Laplacian on a graph constructed from network simulation data. We present lifting and restriction procedures for translating between physical variables and these data-based observables. These procedures allow us to perform equation-free, coarse-grained computations characterizing the long-term dynamics through the design and processing of short bursts of stochastic simulation initialized at appropriate values of the data-based observables.

An Efficient Alternative Mixed Randomized Response Procedure

ERIC Educational Resources Information Center

Singh, Housila P.; Tarray, Tanveer A.

2015-01-01

In this article, we have suggested a new modified mixed randomized response (RR) model and studied its properties. It is shown that the proposed mixed RR model is always more efficient than the Kim and Warde's mixed RR model. The proposed mixed RR model has also been extended to stratified sampling. Numerical illustrations and graphical…

The Fractionation of Highly Siderophile Elements (HSE) in Impact Melts and the Determination of the Meteoritic Components

NASA Astrophysics Data System (ADS)

Schmidt, G.; Palme, H.; Kratz, K. L.

1995-09-01

Lunar highland rocks contain an excess of siderophile elements, which has been attributed to meteoritic influx after the formation of the lunar crust [1-4]. Siderophile element enrichment has subsequently become a standard method for the identification of terrestrial impact craters. Janssens et al. [5], Grieve [6] and Palme et al. [7] have shown the dominant role of impact melt as the main carrier of meteoritic material at large terrestrial impact craters. This has been demonstrated at Clearwater East [8], Lappajarvi [9-11], Saaksjarvi [12], Brent [6] and Rochechouart [5]. The amount of projectile material incorporated in impact melt sheets is generally low (<1%). The highest recorded is 8% at East Clearwater, where the siderophiles are carried in a sulphide phase. In other cases, searches for siderophile anomalies at some impact structure have been largely unsuccessful. Melt bearing mixed breccias (suevitic melt) and fall-back sediments have been found to be free of meteoritic components in Brent, Lappajarvi and Ries samples [6,9,12-14]. However, from approximately 130 craters which are currently known on Earth only four clearly identified chondrites have been found as projectiles of large craters [15,16]. In this study we analyzed twenty-two impact melt samples (10 g) from Saaksjarvi (Finland), Mien and Dellen (Sweden) impact craters for Os, Re, Ir, Ru, Rh, Pd and Au by a slightly modified version of the fire assay neutron activation method using nickel sulphide as the collector [13,14]. All samples were obtained from the collection of the University of Munster. Only fresh, nearly fragment-free, fine grained samples without any sign of alteration were selected for chemical studies. All samples have been described previously [17]. The INAA procedure involved two irradiations: a short irradiation for Rh and a long irradiation for the other elements. Impact melts from Saaksjarvi are highly enriched in PGEs. The flat siderophile pattern suggests that the meteoritic component (PGE/CI = 3x10^-3 to 9x10^-3 relative to CI) in the Saaksjarvi impact melt is relatively unfractionated. Stony-iron meteorites (pallasites) as proposed earlier [7] can therefore be excluded as possible contaminants because Pd and Ir are highly fractionated in pallasites [18]. Impact melts from Mien and Dellen are moderately enriched in PGE. The concentrations are similar (PGE/CI = 3x10^-4 to 1x10^-3 relative to CI). The flat siderophile pattern of the Mien and Dellen impact samples are compatible with carbonaceous chondrite type of material, but a clear geochemical association of any of the known meteorite types is not possible because of the low signal-to-background ratio for Rh, Ru, Pd, and Au. Samples from all impact craters have low Os/PGE ratios (Os/Ir(sub)melt =0.24) compared to chondritic ratios (Os/Ir(sub)CI=1.06). It seems that the oxygen fugacity at the time of impact melting, vaporization and crystallization of the melt body may play the dominant role in the fractionation of Os and PGEs. If Os have been partially lost by volatilization of OsO4 under oxidizing conditions, then Ir is the only element to confirm meteoritic enrichments down to a level of 2x10^-4 CI chondrite. None of the other elements determined are sufficiently sensitive indicators to confirm small meteoritic enrichments, equivalent to <10^-3 CI chondrite, because of low CI/Earth crust-ratios. Acknowledgements. This work was supported by DFG. References: [1] Wasson J. T. et al. (1975) Moon, 13, 121-141. [2] Gros J. et al. (1976) Proc. LSC 7th, 2403-2425. [3] Hertogen J. et al. (1977) Proc. LSC 8th, 17-45. [4] Palme H. (1980) Proc. LPSC 11th, 481-506. [5] Janssens M.-J. et al. (1977) JGR, 82, 750-758. [6] Grieve R. A. F. (1978) Proc. LPSC 9th, 2579-2608. [7] Palme H. et al. (1980) LPSC XI, 848-850. [8] Palme H. et al. (1978) GCA, 42, 313-323. [9] Reimold W. U. and Stoffler D. (1980) Meteoritics, 14, 526-528. [10] Reimold W. U. (1980) Ph. D. thesis, Univ. of Munster, 172 pp. [11] Gobel E. et al. (1980) Z. Naturforsch., 35a, 197-203. [12] Morgan J. W. et al. (1979) GCA, 43, 803-815. [13] Schmidt G. and Pernicka E. (1991) Meteoritics, 26, 392. [14] Schmidt G. and Pernicka E. (1994) GCA, 58, 5083-5090. [15] Palme H. et al. (1981) GCA, 45, 2417-2424. [16] Grieve R. A. F. (1991) Meteoritics, 26, 174-194. [17] Maerz U. (1979) Diploma thesis, Univ. of Munster, 115 pp. [18] Davis A. M. (1977) Ph. D. thesis, Yale University, 285 pp.

Mechanical Properties of Warm Mix Asphalt Prepared Using Foamed Asphalt Binders : Executive Summary Report

DOT National Transportation Integrated Search

2011-03-01

Hot mix asphalt (HMA) is a mixture containing aggregates and asphalt binders prepared at specified : proportions. The aggregates and asphalt binder proportions are determined through a mix design : procedure such as the Marshall Mix Design or the Sup...

Mechanical properties of warm mix asphalt prepared using foamed asphalt binders : executive summary report.

DOT National Transportation Integrated Search

2011-03-01

Hot mix asphalt (HMA) is a mixture containing aggregates and asphalt binders prepared at specified : proportions. The aggregates and asphalt binder proportions are determined through a mix design : procedure such as the Marshall Mix Design or the Sup...

Evaluation of canine red blood cell quality after processing with an automated cell salvage device.

PubMed

Hofbauer, Nina; Windberger, Ursula; Schwendenwein, Ilse; Tichy, Alexander; Eberspächer, Eva

2016-05-01

To evaluate the properties of RBC concentrate harvested after processing fresh whole blood units from healthy dogs with an automated cell salvage device. Prospective, in vitro, experimental study. University teaching hospital. Sixteen healthy, privately owned dogs of various breeds. Fresh canine whole blood collected in bags with citrate phosphate dextrose adenine solution was processed with an automated cell salvage device and analyzed in vitro. Laboratory values determined before (baseline, from a catheter sample) and after processing RBCs (procRBCs) included a complete blood count, selected blood chemistry analytes, erythrocyte osmotic resistance, whole blood viscosity, RBC aggregation, and RBC deformability. Total recovery of RBCs was 80% ± 12%. Hematocrit of the procRBCs yielded by the device was 77% ± 3.7% (mean ± standard deviation). Gross morphology of the RBCs remained unchanged. The mean corpuscular volume, erythrocyte osmotic resistance, RBC deformability, RBC aggregation, and the activity of lactate dehydrogenase showed minor but statistically significant changes from baseline. No differences in the concentrations of free hemoglobin were observed. Whole blood viscosity was less in the procRBCs. Seventy-seven percent (mean) of the platelets were washed out, while a mean of 57% of the leukocytes remained in the procRBCs. Although processing canine blood with this automated cell salvage device leads to slight changes in some properties of RBCs, most of these changes are comparable to changes seen in human blood after processing. Present data indicate that the use of this cell salvage device does not induce changes in canine RBC concentrate that would preclude its use for transfusion. © Veterinary Emergency and Critical Care Society 2016.

40 CFR Appendix 3 to Subpart A of... - Procedure for Mixing Base Fluids With Sediments (EPA Method 1646)

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Procedure for Mixing Base Fluids With Sediments (EPA Method 1646) 3 Appendix 3 to Subpart A of Part 435 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) OIL AND GAS EXTRACTION POINT...

An Investigation of Item Fit Statistics for Mixed IRT Models

ERIC Educational Resources Information Center

Chon, Kyong Hee

2009-01-01

The purpose of this study was to investigate procedures for assessing model fit of IRT models for mixed format data. In this study, various IRT model combinations were fitted to data containing both dichotomous and polytomous item responses, and the suitability of the chosen model mixtures was evaluated based on a number of model fit procedures.…

Grade 11 Students' Interconnected Use of Conceptual Knowledge, Procedural Skills, and Strategic Competence in Algebra: A Mixed Method Study of Error Analysis

ERIC Educational Resources Information Center

Egodawatte, Gunawardena; Stoilescu, Dorian

2015-01-01

The purpose of this mixed-method study was to investigate grade 11 university/college stream mathematics students' difficulties in applying conceptual knowledge, procedural skills, strategic competence, and algebraic thinking in solving routine (instructional) algebraic problems. A standardized algebra test was administered to thirty randomly…

GPR surveying of transport infrastructures and buildings; underground utility and void sensing - ongoing activities in Working Group 2 of COST Action TU1208

NASA Astrophysics Data System (ADS)

Pajewski, Lara; Plati, Christina; Derobert, Xavier

2015-04-01

This work aims at presenting the ongoing research activities carried out in Working Group 2 'GPR surveying of pavements, bridges, tunnels and buildings; underground utility and void sensing' of the COST (European COoperation in Science and Technology) Action TU1208 'Civil Engineering Applications of Ground Penetrating Radar' (www.GPRadar.eu). The principal goal of the COST Action TU1208 is to exchange and increase scientific-technical knowledge and experience of Ground Penetrating Radar (GPR) techniques in civil engineering, whilst simultaneously promoting throughout Europe the effective use of this safe and non-destructive technique in the monitoring of infrastructures and structures. Four Working Groups (WGs) carry out the research activities. WG1 focuses on the development of innovative GPR equipment dedicated for civil engineering applications. WG2 deals with the development of guidelines and protocols for the surveying, through the use of a GPR system, of transport infrastructure and buildings, as well as for the sensing of utilities and voids. WG3 deals with the development of electromagnetic forward and inverse scattering methods, for the characterization of GPR scenarios, as well as with data- processing algorithms for the elaboration of the data collected during GPR surveys. WG4 is concerned with the use of GPR in fields different from the civil engineering, as well as with the integration of GPR with other non-destructive testing techniques. Each WG includes several Projects. WG2 includes five Projects. Project 2.1 focuses on outlining 'Innovative inspection procedures for effective GPR surveying of critical transport infrastructures (pavements, bridges and tunnels).' Project 2.2 is concerned with the development of 'Innovative inspection procedures for effective GPR surveying of buildings.' Project 2.3 deals with identifying 'Innovative inspection procedures for effective GPR sensing and mapping of underground utilities and voids, with a focus to urban areas.' Project 2.4 focuses on the development of 'Innovative procedures for effective GPR inspection of construction materials and structures.' The WG2 also includes Project 2.5 on the 'Determination, by using GPR, of the volumetric water content in structures, sub-structures, foundations and soil,' this is a topic of great interest in civil engineering, as water infiltration is often a relevant cause of degradation of structures, such as roads of bridges, and of rebar corrosion. During the first year of the Action, information was collected and shared about state-of-the-art, ongoing studies, problems and future research needs, in the topics covered by the five above-mentioned Projects [1-3]. Based on the experience and knowledge gained from the in-depth review work carried out by WG2, several case studies were then conducted; they were presented during the Second General Meeting and the GPR 2014 conference [5, 6]. Furthermore, the extension of GPR application to railways track ballast assessment was demonstrated [7]. The WG2 identified reference test-sites, suitable to compare inspection procedures or to test GPR equipment. The IFSTTAR geophysical test site is an open-air laboratory including a large and deep area, filled with various materials arranged in horisontal compacted slices, separated by vertical interfaces and water-tighted in surface; several objects as pipes, polystyrene hollows, boulders and masonry are embedded in the field [4]. The IFSTTAR full-scale APT facility is an outdoor circular carousel dedicated to full-scale pavement experiments, consisting of a central tower and four long arms equipped with wheels, running on a circular test track [4]. Furthermore, the WG2 is building a database of available experimental results, which are at the disposal of WG3 Members to test their electromagnetic modeling/inversion/data-processing methods. Another interesting and promising WG2 initiative that has to be mentioned is the development of a Catalogue of European test sites and laboratories for the testing of GPR equipment, methodology and procedures, that is being coordinated by France and Italy. The catalogue will represent a useful tool for the GPR community and it will contribute to identifying new cooperation possibilities among research groups, to clarifying which are the missing testing facilities in the various European regions, and to addressing current or future research needs. Acknowledgement The Authors thank COST, for funding the COST Action TU1208 'Civil Engineering Applications of Ground Penetrating Radar.' References [1] Proc. First Action's General Meeting (Rome, Italy, 22-24 July 2013), 1st edition, COST Action TU1208, L. Pajewski, A. Benedetto, Eds., ISBN 978-88-548-6191-6 (Aracne, 2013). [2] Civil Engineering Applications of Ground Penetrating Radar, A. Benedetto, L. Pajewski, Eds., ISBN 978-3-319-04812-3 (Springer, 2015). [3] A. Benedetto, 'State of the Art of GPR Applications and New Trends in Transportation Infrastructures,' Future Trends in Civil Engineering, A. Ceric, S. Lakusic, Eds., ISBN 978-953-6272-65-5 (2014). [4] Proc. 2013 Working Group Progress Meeting (Nantes, France, 24-25 February 2014), COST Action TU1208, L. Pajewski, X. Derobert, Eds., ISBN 978-88-548-7223-3 (Aracne, 2014). [5] Proc. 15th International Conference on Ground Penetrating Radar - GPR2014, S. Lambot, A. Giannopoulos, L. Pajewski, F. De André, E. Slob, C. Craeye, Eds., IEEE Conf. Number 35163 (IEEE, 2014). [6] Proc. Second Action's General Meeting (Vienna, Austria, 30 April-2 May 2014), COST Action TU1208, L. Pajewski, A. Benedetto, Eds., ISBN 978-88-548-7224-0 (Aracne, 2014). [7] S. Fontul, F. De Chiara, E. Fortunato, A. Lopes, 'Evaluation of ballast condition using Ground Penetrating Radar,' The Ninth Intl. Conf. on Engineering Computational Technology (2014).

7 CFR 58.638 - Freezing the mix.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Freezing the mix. 58.638 Section 58.638 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Procedures § 58.638 Freezing the mix. After the mix enters the freezer, it shall be frozen as rapidly as...

7 CFR 58.634 - Assembling and combining mix ingredients.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Assembling and combining mix ingredients. 58.634... Service 1 Operations and Operating Procedures § 58.634 Assembling and combining mix ingredients. The assembling and combining of mix ingredients for processing shall be in accordance with clean and sanitary...

7 CFR 58.638 - Freezing the mix.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Freezing the mix. 58.638 Section 58.638 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Procedures § 58.638 Freezing the mix. After the mix enters the freezer, it shall be frozen as rapidly as...

7 CFR 58.634 - Assembling and combining mix ingredients.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Assembling and combining mix ingredients. 58.634... Service 1 Operations and Operating Procedures § 58.634 Assembling and combining mix ingredients. The assembling and combining of mix ingredients for processing shall be in accordance with clean and sanitary...

7 CFR 58.634 - Assembling and combining mix ingredients.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Assembling and combining mix ingredients. 58.634... Service 1 Operations and Operating Procedures § 58.634 Assembling and combining mix ingredients. The assembling and combining of mix ingredients for processing shall be in accordance with clean and sanitary...

7 CFR 58.638 - Freezing the mix.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Freezing the mix. 58.638 Section 58.638 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Procedures § 58.638 Freezing the mix. After the mix enters the freezer, it shall be frozen as rapidly as...

7 CFR 58.637 - Cooling the mix.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Cooling the mix. 58.637 Section 58.637 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Procedures § 58.637 Cooling the mix. The mix shall be immediately cooled to a temperature of 45 °F. or lower...

7 CFR 58.635 - Pasteurization of the mix.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Pasteurization of the mix. 58.635 Section 58.635 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Procedures § 58.635 Pasteurization of the mix. Every particle of the mix, except added flavoring ingredients...

7 CFR 58.637 - Cooling the mix.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Cooling the mix. 58.637 Section 58.637 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Procedures § 58.637 Cooling the mix. The mix shall be immediately cooled to a temperature of 45 °F. or lower...

7 CFR 58.637 - Cooling the mix.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Cooling the mix. 58.637 Section 58.637 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Procedures § 58.637 Cooling the mix. The mix shall be immediately cooled to a temperature of 45 °F. or lower...

7 CFR 58.635 - Pasteurization of the mix.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Pasteurization of the mix. 58.635 Section 58.635 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Procedures § 58.635 Pasteurization of the mix. Every particle of the mix, except added flavoring ingredients...

7 CFR 58.635 - Pasteurization of the mix.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Pasteurization of the mix. 58.635 Section 58.635 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... Procedures § 58.635 Pasteurization of the mix. Every particle of the mix, except added flavoring ingredients...

29 CFR 1910.426 - Mixed-gas diving.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 5 2010-07-01 2010-07-01 false Mixed-gas diving. 1910.426 Section 1910.426 Labor... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Commercial Diving Operations Specific Operations Procedures § 1910.426 Mixed-gas diving. (a) General. Employers engaged in mixed-gas diving shall comply with the following...

46 CFR 197.434 - Surface-supplied mixed-gas diving.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Surface-supplied mixed-gas diving. 197.434 Section 197... HEALTH STANDARDS GENERAL PROVISIONS Commercial Diving Operations Specific Diving Mode Procedures § 197.434 Surface-supplied mixed-gas diving. The diving supervisor shall insure that— (a) When mixed-gas...

Development of a Hybrid RANS/LES Method for Compressible Mixing Layer Simulations

NASA Technical Reports Server (NTRS)

Georgiadis, Nicholas J.; Alexander, J. Iwan D.; Reshotko, Eli

2001-01-01

A hybrid method has been developed for simulations of compressible turbulent mixing layers. Such mixing layers dominate the flows in exhaust systems of modem day aircraft and also those of hypersonic vehicles currently under development. The hybrid method uses a Reynolds-averaged Navier-Stokes (RANS) procedure to calculate wall bounded regions entering a mixing section, and a Large Eddy Simulation (LES) procedure to calculate the mixing dominated regions. A numerical technique was developed to enable the use of the hybrid RANS/LES method on stretched, non-Cartesian grids. The hybrid RANS/LES method is applied to a benchmark compressible mixing layer experiment. Preliminary two-dimensional calculations are used to investigate the effects of axial grid density and boundary conditions. Actual LES calculations, performed in three spatial directions, indicated an initial vortex shedding followed by rapid transition to turbulence, which is in agreement with experimental observations.

Utilization Management of Orthopedic Services by Fitzsimons Army Medical Center and Evans Army Community Hospital

DTIC Science & Technology

1993-08-01

LOS Mean LOS: Total LOS: positions g FAMC-HCFA FAMC-HCFA 214 Back & Neck Proc with CC 5 4.02 51.6 42.6 213 2_11 Wound Debrid & Skin Graft ex Hand, for...Administration (HCFA) DRG Dis- CMI FAMC LO5 Mean LOS: Total LOS: posit’i Mean FAMC-HCFA FAMC-HCFA 263 Skin Graft &/ox Debrid for Skin Ulcer or Cellulitis w CC...32.0 21.4 43 468 Extensive O.R. Proc Un- Related to Principal DX 16 3.42 7.6 -5.5 -89 217 Wound Debrid & Skin Graft ex Hand, for Muscskelet & Conn

Proceedings of the Conference on the Design of Experiments in Army Research Development and Testing (27th) Held at The McKimmon Center for Continuing Education, North Carolina State University, Raleigh, North Carolina on 21-23 October 1981

DTIC Science & Technology

1982-06-01

of states and a class of cascade processes. Proc. Cambridge Phil . Soc. 47, 77-85. Foster, F. G. (1952). On Markov chains with an enumerable infinity of...states. Proc. Cambridge Phil . Soc. 48, 587-591. Foster, F. G. (1953). On the stochastic matrices associated with certain queuing processes. Ann. Math...Frawley (1973), Li and Schucany (1975), Schucany and Beckett (1976), and Hollander and Sethurann (1978). The Schucany-Frawley-Li test is based on the

No regularity singularities exist at points of general relativistic shock wave interaction between shocks from different characteristic families.

PubMed

Reintjes, Moritz; Temple, Blake

2015-05-08

We give a constructive proof that coordinate transformations exist which raise the regularity of the gravitational metric tensor from C 0,1 to C 1,1 in a neighbourhood of points of shock wave collision in general relativity. The proof applies to collisions between shock waves coming from different characteristic families, in spherically symmetric spacetimes. Our result here implies that spacetime is locally inertial and corrects an error in our earlier Proc. R. Soc. A publication, which led us to the false conclusion that such coordinate transformations, which smooth the metric to C 1,1 , cannot exist. Thus, our result implies that regularity singularities (a type of mild singularity introduced in our Proc. R. Soc. A paper) do not exist at points of interacting shock waves from different families in spherically symmetric spacetimes. Our result generalizes Israel's celebrated 1966 paper to the case of such shock wave interactions but our proof strategy differs fundamentally from that used by Israel and is an extension of the strategy outlined in our original Proc. R. Soc. A publication. Whether regularity singularities exist in more complicated shock wave solutions of the Einstein-Euler equations remains open.

No regularity singularities exist at points of general relativistic shock wave interaction between shocks from different characteristic families

PubMed Central

Reintjes, Moritz; Temple, Blake

2015-01-01

We give a constructive proof that coordinate transformations exist which raise the regularity of the gravitational metric tensor from C0,1 to C1,1 in a neighbourhood of points of shock wave collision in general relativity. The proof applies to collisions between shock waves coming from different characteristic families, in spherically symmetric spacetimes. Our result here implies that spacetime is locally inertial and corrects an error in our earlier Proc. R. Soc. A publication, which led us to the false conclusion that such coordinate transformations, which smooth the metric to C1,1, cannot exist. Thus, our result implies that regularity singularities (a type of mild singularity introduced in our Proc. R. Soc. A paper) do not exist at points of interacting shock waves from different families in spherically symmetric spacetimes. Our result generalizes Israel's celebrated 1966 paper to the case of such shock wave interactions but our proof strategy differs fundamentally from that used by Israel and is an extension of the strategy outlined in our original Proc. R. Soc. A publication. Whether regularity singularities exist in more complicated shock wave solutions of the Einstein–Euler equations remains open. PMID:27547092

Acceptance procedures for dense-graded mixes

DOT National Transportation Integrated Search

2001-03-01

Recent literature related to acceptance procedures for dense-graded mixtures is summarized. Current state of practice and development of acceptance procedures are reviewed. Many agencies are reducing the number of process control-related parameters i...

Biotechnology

NASA Image and Video Library

2003-05-05

Aboard the International Space Station (ISS), the Tissue Culture Module (TCM) is the stationary bioreactor vessel in which cell cultures grow. However, for the Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI), color polystyrene beads are used to measure the effectiveness of various mixing procedures. The beads are similar in size and density to human lymphoid cells. Uniform mixing is a crucial component of CBOSS experiments involving the immune response of human lymphoid cell suspensions. The goal is to develop procedures that are both convenient for the flight crew and are optimal in providing uniform and reproducible mixing of all components, including cells. The average bead density in a well mixed TCM will be uniform, with no bubbles, and it will be measured using the absorption of light. In this photograph, a TCM is shown after mixing protocols, and bubbles of various sizes can be seen.

A Global Survey of Cloud Thermodynamic Phase using High Spatial Resolution VSWIR Spectroscopy, 2005-2015

NASA Astrophysics Data System (ADS)

Thompson, D. R.; Kahn, B. H.; Green, R. O.; Chien, S.; Middleton, E.; Tran, D. Q.

2017-12-01

Clouds' variable ice and liquid content significantly influences their optical properties, evolution, and radiative forcing potential (Tan and Storelvmo, J. Atmos. Sci, 73, 2016). However, most remote measurements of thermodynamic phase have spatial resolutions of 1 km or more and are insensitive to mixed phases. This under-constrains important processes, such as spatial partitioning within mixed phase clouds, that carry outsize radiative forcing impacts. These uncertainties could shift Global Climate Model (GCM) predictions of future warming by over 1 degree Celsius (Tan et al., Science 352:6282, 2016). Imaging spectroscopy of reflected solar energy from the 1.4 - 1.8 μm shortwave infrared (SWIR) spectral range can address this observational gap. These observations can distinguish ice and water absorption, providing a robust and sensitive measurement of cloud top thermodynamic phase including mixed phases. Imaging spectrometers can resolve variations at scales of tens to hundreds of meters (Thompson et al., JGR-Atmospheres 121, 2016). We report the first such global high spatial resolution (30 m) survey, based on data from 2005-2015 acquired by the Hyperion imaging spectrometer onboard NASA's EO-1 spacecraft (Pearlman et al., Proc. SPIE 4135, 2001). Estimated seasonal and latitudinal distributions of cloud thermodynamic phase generally agree with observations made by other satellites such as the Atmospheric Infrared Sounder (AIRS). Variogram analyses reveal variability at different spatial scales. Our results corroborate previously observed zonal distributions, while adding insight into the spatial scales of processes governing cloud top thermodynamic phase. Figure: Thermodynamic phase retrievals. Top: Example of a cloud top thermodynamic phase map from the EO-1/Hyperion. Bottom: Latitudinal distributions of pure and mixed phase clouds, 2005-2015, showing Liquid Thickness Fraction (LTF). LTF=0 corresponds to pure ice absorption, while LTF=1 is pure liquid. The archive contains over 45,000 scenes. Copyright 2017, California Institute of Technology. Government Support Acknowledged.

Decision Process to Identify Lessons for Transition to a Distributed (or Blended) Learning Instructional Format

DTIC Science & Technology

2009-09-01

instructional format. Using a mixed- method coding and analysis approach, the sample of POIs were categorized, coded, statistically analyzed, and a... Method SECURITY CLASSIFICATION OF 19. LIMITATION OF 20. NUMBER 21. RESPONSIBLE PERSON 16. REPORT Unclassified 17. ABSTRACT...transition to a distributed (or blended) learning format. Procedure: A mixed- methods approach, combining qualitative coding procedures with basic

Fully-coupled analysis of jet mixing problems. Three-dimensional PNS model, SCIP3D

NASA Technical Reports Server (NTRS)

Wolf, D. E.; Sinha, N.; Dash, S. M.

1988-01-01

Numerical procedures formulated for the analysis of 3D jet mixing problems, as incorporated in the computer model, SCIP3D, are described. The overall methodology closely parallels that developed in the earlier 2D axisymmetric jet mixing model, SCIPVIS. SCIP3D integrates the 3D parabolized Navier-Stokes (PNS) jet mixing equations, cast in mapped cartesian or cylindrical coordinates, employing the explicit MacCormack Algorithm. A pressure split variant of this algorithm is employed in subsonic regions with a sublayer approximation utilized for treating the streamwise pressure component. SCIP3D contains both the ks and kW turbulence models, and employs a two component mixture approach to treat jet exhausts of arbitrary composition. Specialized grid procedures are used to adjust the grid growth in accordance with the growth of the jet, including a hybrid cartesian/cylindrical grid procedure for rectangular jets which moves the hybrid coordinate origin towards the flow origin as the jet transitions from a rectangular to circular shape. Numerous calculations are presented for rectangular mixing problems, as well as for a variety of basic unit problems exhibiting overall capabilities of SCIP3D.

A gravitational potential finding for rotating cosmological body in the context of proto-planetary dynamics problem solving

NASA Astrophysics Data System (ADS)

Krot, Alexander M.

2008-09-01

The statistical theory for a cosmological body forming (so-called the spheroidal body model) has been proposed in [1]-[9]. Within the framework of this theory, bodies have fuzzy outlines and are represented by means of spheroidal forms [1],[2]. In the work [3], it has been investigated a slowly evolving in time process of a gravitational compression of a spheroidal body close to an unstable equilibrium state. In the papers [4],[5], the equation of motion of particles inside the weakly gravitating spheroidal body modeled by means of an ideal liquid has been obtained. Using Schwarzschild's and Kerr's metrics a consistency of the proposed statistical model with the general relativity has been shown in [6]. The proposed theory follows from the conception for forming a spheroidal body from protoplanetary nebula [7],[8]; it permits to derive the form of distribution functions for an immovable [1]-[5] and rotating spheroidal body [6]-[8] as well as their density masses and also the distribution function of specific angular momentum of the rotating uniformly spheroidal body [7],[8]. It is well-known there is not a statistical equilibrium in a gas-dust proto-planetary cloud because of long relaxation time for proto-planets formation in own gravitational field. This proto-planetary system behavior can be described by Jeans' equation in partial derivations relative to a distribution function [9]. The problem for finding a general solution of Jeans' equation is connected directly with an analytical expression for potential of gravitational field. Thus, the determination of gravitational potential is the main problem of statistical dynamics for proto-planetary system [9]. This work shows this task of proto-planetary dynamics can be solved on the basis of spheroidal bodies theory. The proposed theory permits to derive the form of gravitational potential for a rotating spheroidal body at a long distance from its center. Using the obtained analytical expression for potential of gravitational field, the gravitational strength (as well as angular momentum space function) in a remote zone of a slowly gravitational compressed rotating spheroidal body is obtained. As a result, a distribution function describing mechanical state of proto-planetary system can be found from the Jeans' equation. References: [1] Krot AM. The statistical model of gravitational interaction of particles. Uspekhi Sovremennoï Radioelektroniki (special issue "Cosmic Radiophysics", Moscow) 1996; 8: 66-81 (in Russian). [2] Krot AM. Use of the statistical model of gravity for analysis of nonhomogeneity in earth surface. Proc. SPIE's 13th Annual Intern. Symposium "AeroSense", Orlando, Florida, USA, April 5-9, 1999; 3710: 1248-1259. [3] Krot AM. Statistical description of gravitational field: a new approach. Proc. SPIE's 14th Annual Intern.Symposium "AeroSense", Orlando, Florida, USA, April 24-28, 2000; 4038: 1318-1329. [4] Krot AM. Gravidynamical equations for a weakly gravitating spheroidal body. Proc. SPIE's 15th Annual Intern. Symposium "AeroSense", Orlando, Florida, USA, April 16-20, 2001; 4394: 1271-1282. [5] Krot AM. Development of gravidynamical equations for a weakly gravitating body in the vicinity of absolute zero temperature. Proc. 53rd Intern. Astronautical Congress (IAC) - The 2nd World Space Congress-2002, Houston, Texas, USA, October 10-19, 2002; Preprint IAC-02-J.P.01: 1-11. [6] Krot AM. The statistical model of rotating and gravitating spheroidal body with the point of view of general relativity. Proc. 35th COSPAR Scientific Assembly, Paris, France, July 18-25, 2004; Abstract-Nr. COSPAR 04-A- 00162. [7] Krot A. The statistical approach to exploring formation of Solar system. Proc. European Geoscinces Union (EGU) General Assembly, Vienna, Austria, April 02-07, 2006; Geophysical Research Abstracts, vol. 8: EGU06-A- 00216, SRef-ID: 1607-7962/gra/. [8] Krot AM. The statistical model of original and evolution planets of Solar system and planetary satellities. Proc. European Planetary Science Congress, Berlin, Germany, September 18-22, 2006; Planetary Research Abstracts, ESPC2006-A-00014. [9] Krot A. On the principal difficulties and ways to their solution in the theory of gravitational condensation of infinitely distributed dust substance. Proc. XXIV IUGG General Assembly, Perugia, Italy, July 2-13, 2007; GS002 Symposium "Gravity Field", Abstract GS002-3598: 143-144.

Acceptance procedures for dense-graded mixes : literature review.

DOT National Transportation Integrated Search

2001-03-01

Recent literature related to acceptance procedures for dense-graded mixtures is summarized. Current state of practice and development of acceptance procedures are reviewed. Many agencies are reducing the number of process control-related parameters i...

Trends in surgical management and pre-operative urodynamics in female medicare beneficiaries with mixed incontinence.

PubMed

Chughtai, Bilal; Hauser, Nicholas; Anger, Jennifer; Asfaw, Tirsit; Laor, Leanna; Mao, Jialin; Lee, Richard; Te, Alexis; Kaplan, Steven; Sedrakyan, Art

2017-02-01

We sought to examine the surgical trends and utilization of treatment for mixed urinary incontinence among female Medicare beneficiaries. Data was obtained from a 5% national random sample of outpatient and carrier claims from 2000 to 2011. Included were female patients 65 and older, diagnosed with mixed urinary incontinence, who underwent surgical treatment identified by Current Procedural Terminology, Fourth Edition (CPT-4) codes. Urodynamics (UDS) before initial and secondary procedure were also identified using CPT-4 codes. Procedural trends and utilization of UDS were analyzed. Utilization of UDS increased during the study period, from 38.4% to 74.0% prior to initial surgical intervention, and from 28.6% to 62.5% preceding re-intervention. Sling surgery (63.0%) and injectable bulking agents (28.0%) were the most common surgical treatments adopted, followed by sacral nerve stimulation (SNS) (4.8%) and Burch (4.0%) procedures. Re-intervention was performed in 4.0% of patients initially treated with sling procedures and 21.3% of patients treated with bulking agents, the majority of whom (51.7% and 76.3%, respectively) underwent injection of a bulking agent. Risk of re-intervention was not different among those who did or did not receive urodynamic tests prior to the initial procedure (8.5% vs. 9.3%) CONCLUSIONS: Sling and bulk agents are the most common treatment for MUI. Preoperative urodynamic testing was not related to risk of re-intervention following surgery for mixed urinary incontinence in this cohort. Neurourol. Urodynam. 36:422-425, 2017. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

Statistical methodology for the analysis of dye-switch microarray experiments

PubMed Central

Mary-Huard, Tristan; Aubert, Julie; Mansouri-Attia, Nadera; Sandra, Olivier; Daudin, Jean-Jacques

2008-01-01

Background In individually dye-balanced microarray designs, each biological sample is hybridized on two different slides, once with Cy3 and once with Cy5. While this strategy ensures an automatic correction of the gene-specific labelling bias, it also induces dependencies between log-ratio measurements that must be taken into account in the statistical analysis. Results We present two original statistical procedures for the statistical analysis of individually balanced designs. These procedures are compared with the usual ML and REML mixed model procedures proposed in most statistical toolboxes, on both simulated and real data. Conclusion The UP procedure we propose as an alternative to usual mixed model procedures is more efficient and significantly faster to compute. This result provides some useful guidelines for the analysis of complex designs. PMID:18271965

Double-bosonization and Majid's conjecture, (I): Rank-inductions of ABCD

NASA Astrophysics Data System (ADS)

Hu, Hongmei; Hu, Naihong

2015-11-01

Majid developed in [S. Majid, Math. Proc. Cambridge Philos. Soc. 125, 151-192 (1999)] the double-bosonization theory to construct Uq(𝔤) and expected to generate inductively not just a line but a tree of quantum groups starting from a node. In this paper, the authors confirm Majid's first expectation (see p. 178 [S. Majid, Math. Proc. Cambridge Philos. Soc. 125, 151-192 (1999)]) through giving and verifying the full details of the inductive constructions of Uq(𝔤) for the classical types, i.e., the ABCD series. Some examples in low ranks are given to elucidate that any quantum group of classical type can be constructed from the node corresponding to Uq(𝔰𝔩2).

40 CFR 63.9520 - What procedures must I use to demonstrate initial compliance?

Code of Federal Regulations, 2013 CFR

2013-07-01

... must determine the percent of HAP solvent discharged to the atmosphere for each mix batch according to... to the atmosphere for each mix batch, percent; Srec = Weight of HAP solvent recovered for each mix... discharged to the atmosphere for that mix batch (Pb). (7) Determine the 7-day block average percent of HAP...

40 CFR 63.9520 - What procedures must I use to demonstrate initial compliance?

Code of Federal Regulations, 2011 CFR

2011-07-01

... must determine the percent of HAP solvent discharged to the atmosphere for each mix batch according to... to the atmosphere for each mix batch, percent; Srec = Weight of HAP solvent recovered for each mix... discharged to the atmosphere for that mix batch (Pb). (7) Determine the 7-day block average percent of HAP...

40 CFR 63.9520 - What procedures must I use to demonstrate initial compliance?

Code of Federal Regulations, 2012 CFR

2012-07-01

... must determine the percent of HAP solvent discharged to the atmosphere for each mix batch according to... to the atmosphere for each mix batch, percent; Srec = Weight of HAP solvent recovered for each mix... discharged to the atmosphere for that mix batch (Pb). (7) Determine the 7-day block average percent of HAP...

40 CFR 63.9520 - What procedures must I use to demonstrate initial compliance?

Code of Federal Regulations, 2014 CFR

2014-07-01

... must determine the percent of HAP solvent discharged to the atmosphere for each mix batch according to... to the atmosphere for each mix batch, percent; Srec = Weight of HAP solvent recovered for each mix... discharged to the atmosphere for that mix batch (Pb). (7) Determine the 7-day block average percent of HAP...

A Case Study of a Mixed Methods Study Engaged in Integrated Data Analysis

ERIC Educational Resources Information Center

Schiazza, Daniela Marie

2013-01-01

The nascent field of mixed methods research has yet to develop a cohesive framework of guidelines and procedures for mixed methods data analysis (Greene, 2008). To support the field's development of analytical frameworks, this case study reflects on the development and implementation of a mixed methods study engaged in integrated data analysis.…

Costing complexities in mixed apheresis.

PubMed

Trenchard, P M

1993-07-01

For mixed apheresis procedures {plasma (PMA) and platelets (PLTs) as products}, six cost-accounting methods are described for apportioning the unit procedure cost ($156.02; representative example) to the two products. The methods are derived from clinical/scientific apheresis principles, but provide a wide range of unit PLT costs ($14.10, 19.71, 34.37, 42.06, 43.82 and 52.00) which relate inversely to the corresponding unit PMA costs ($73.84, 63.01, 34.36, 19.37, 15.94 and 0.00). Two of the methods appear particularly appropriate, depending upon whether the procedure is driven by PLTs predominantly or by PMA+PLTs equally. The paper encourages apheresis physicians and scientists to debate the relative attributes of the methods, develop refinements of the same, and determine through dialogue that mixed apheresis costing models properly account for the clinical science of the service provided.

MnDOT thin whitetopping selection procedures : final report.

DOT National Transportation Integrated Search

2017-06-01

This report provides an integrated selection procedure for evaluating whether an existing hot-mix asphalt (HMA) pavement is an appropriate candidate for a bonded concrete overlay of asphalt (BCOA). The selection procedure includes (1) a desk review, ...

Integrated Data Collection Analysis (IDCA) Program - Mixing Procedures and Materials Compatibility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olinger, Becky D.; Sandstrom, Mary M.; Warner, Kirstin F.

Three mixing procedures have been standardized for the IDCA proficiency test—solid-solid, solid-liquid, and liquid-liquid. Due to the variety of precursors used in formulating the materials for the test, these three mixing methods have been designed to address all combinations of materials. Hand mixing is recommended for quantities less than 10 grams and Jar Mill mixing is recommended for quantities over 10 grams. Consideration must also be given to the type of container used for the mixing due to the wide range of chemical reactivity of the precursors and mixtures. Eight web site sources from container and chemical manufacturers have beenmore » consulted. Compatible materials have been compiled as a resource for selecting containers made of materials stable to the mixtures. In addition, container materials used in practice by the participating laboratories are discussed. Consulting chemical compatibility tables is highly recommended for each operation by each individual engaged in testing the materials in this proficiency test.« less

A scoring system for appraising mixed methods research, and concomitantly appraising qualitative, quantitative and mixed methods primary studies in Mixed Studies Reviews.

PubMed

Pluye, Pierre; Gagnon, Marie-Pierre; Griffiths, Frances; Johnson-Lafleur, Janique

2009-04-01

A new form of literature review has emerged, Mixed Studies Review (MSR). These reviews include qualitative, quantitative and mixed methods studies. In the present paper, we examine MSRs in health sciences, and provide guidance on processes that should be included and reported. However, there are no valid and usable criteria for concomitantly appraising the methodological quality of the qualitative, quantitative and mixed methods studies. To propose criteria for concomitantly appraising the methodological quality of qualitative, quantitative and mixed methods studies or study components. A three-step critical review was conducted. 2322 references were identified in MEDLINE, and their titles and abstracts were screened; 149 potentially relevant references were selected and the full-text papers were examined; 59 MSRs were retained and scrutinized using a deductive-inductive qualitative thematic data analysis. This revealed three types of MSR: convenience, reproducible, and systematic. Guided by a proposal, we conducted a qualitative thematic data analysis of the quality appraisal procedures used in the 17 systematic MSRs (SMSRs). Of 17 SMSRs, 12 showed clear quality appraisal procedures with explicit criteria but no SMSR used valid checklists to concomitantly appraise qualitative, quantitative and mixed methods studies. In two SMSRs, criteria were developed following a specific procedure. Checklists usually contained more criteria than needed. In four SMSRs, a reliability assessment was described or mentioned. While criteria for quality appraisal were usually based on descriptors that require specific methodological expertise (e.g., appropriateness), no SMSR described the fit between reviewers' expertise and appraised studies. Quality appraisal usually resulted in studies being ranked by methodological quality. A scoring system is proposed for concomitantly appraising the methodological quality of qualitative, quantitative and mixed methods studies for SMSRs. This scoring system may also be used to appraise the methodological quality of qualitative, quantitative and mixed methods components of mixed methods research.

Biotechnology

NASA Image and Video Library

2003-05-07

Aboard the International Space Station (ISS), the Tissue Culture Module (TCM) is the stationary bioreactor vessel in which cell cultures grow. However, for the Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI), color polystyrene beads are used to measure the effectiveness of various mixing procedures. Uniform mixing is a crucial component of CBOSS experiments involving the immune response of human lymphoid cell suspensions. In this picture, the beads are trapped in the injection port shortly after injection. Swirls of beads indicate, event to the naked eye, the contents of the TCM are not fully mixed. The beads are similar in size and density to human lymphoid cells. The goal is to develop procedures that are both convenient for the flight crew and are optimal in providing uniform and reproducible mixing of all components, including cells. The average bead density in a well mixed TCM will be uniform, with no bubbles, and it will be measured using the absorption of light

Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI)

NASA Technical Reports Server (NTRS)

2003-01-01

Aboard the International Space Station (ISS), the Tissue Culture Module (TCM) is the stationary bioreactor vessel in which cell cultures grow. However, for the Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI), color polystyrene beads are used to measure the effectiveness of various mixing procedures. The beads are similar in size and density to human lymphoid cells. Uniform mixing is a crucial component of CBOSS experiments involving the immune response of human lymphoid cell suspensions. The goal is to develop procedures that are both convenient for the flight crew and are optimal in providing uniform and reproducible mixing of all components, including cells. The average bead density in a well mixed TCM will be uniform, with no bubbles, and it will be measured using the absorption of light. In this photograph, a TCM is shown after mixing protocols, and bubbles of various sizes can be seen.

Brazil nut meal and spray-dried egg powders as alternatives to synthetic methionine in organic laying hen diets.

PubMed

Burley, H K; Patterson, P H

2017-09-01

The United States organic poultry industry is currently facing a limitation on dietary inclusion of synthetic methionine (Met). This study investigated Brazil nut protein powder (BNPP), spray-dried egg white (SDEW), and spray-dried egg blend (70:30 albumen: yolk) (SDEB) as alternatives to synthetic Met in organic laying hen diets. A total of 270 Hy-Line Brown laying hens was fed 5 diets from 22 to 38 wk of age, with 6 replicates of 3 adjacent cages per diet and 3 hens per cage. Diets included a commercial control (COM) (non-organic with standard CP and synthetic Met), an organic control (ORG) (with no synthetic Met, but higher CP to meet Met requirements), and 3 organic treatment diets with no synthetic Met, but including BNPP, SDEW, or SDEB at levels to meet Met requirements. Egg production and quality, body weight (BW), feed intake, and manure nutrients and ammonia were assessed. Data were analyzed using the PROC MIXED procedure of SAS, with Tukey's test used for multiple mean comparisons, and P ≤ 0.05 was deemed statistically significant. Body weight was greatest for the COM diet, and feed conversion improved for hens fed egg-based diets compared to controls. Egg weight and production did not differ between COM and treatment diets. The SDEW diet had greater albumen height and Haugh units compared to ORG and BNPP diets and greater percent albumen compared to COM and BNPP diets. Specific gravity was greatest for BNPP fed hens. Manure DM and potash were highest from COM and BNPP diets, respectively. Both egg-based diets increased ammonia flux relative to the COM diet. The BNPP and egg-based diets were lower in cost for $/metric tonne, $/dozen eggs, and $/kg of eggs compared to the ORG diet. The ingredients assessed herein could, therefore, cost-effectively replace synthetic Met in organic hen diets without negatively impacting egg production. © 2017 Poultry Science Association Inc.

Estimating Body Composition in Adolescent Sprint Athletes: Comparison of Different Methods in a 3 Years Longitudinal Design

PubMed Central

Aerenhouts, Dirk

2015-01-01

A recommended field method to assess body composition in adolescent sprint athletes is currently lacking. Existing methods developed for non-athletic adolescents were not longitudinally validated and do not take maturation status into account. This longitudinal study compared two field methods, i.e., a Bio Impedance Analysis (BIA) and a skinfold based equation, with underwater densitometry to track body fat percentage relative to years from age at peak height velocity in adolescent sprint athletes. In this study, adolescent sprint athletes (34 girls, 35 boys) were measured every 6 months during 3 years (age at start = 14.8 ± 1.5yrs in girls and 14.7 ± 1.9yrs in boys). Body fat percentage was estimated in 3 different ways: 1) using BIA with the TANITA TBF 410; 2) using a skinfold based equation; 3) using underwater densitometry which was considered as the reference method. Height for age since birth was used to estimate age at peak height velocity. Cross-sectional analyses were performed using repeated measures ANOVA and Pearson correlations between measurement methods at each occasion. Data were analyzed longitudinally using a multilevel cross-classified model with the PROC Mixed procedure. In boys, compared to underwater densitometry, the skinfold based formula revealed comparable values for body fatness during the study period whereas BIA showed a different pattern leading to an overestimation of body fatness starting from 4 years after age at peak height velocity. In girls, both the skinfold based formula and BIA overestimated body fatness across the whole range of years from peak height velocity. The skinfold based method appears to give an acceptable estimation of body composition during growth as compared to underwater densitometry in male adolescent sprinters. In girls, caution is warranted when interpreting estimations of body fatness by both BIA and a skinfold based formula since both methods tend to give an overestimation. PMID:26317426

Does heightened fear of crime lead to poorer mental health in new suburbs, or vice versa?

PubMed

Foster, Sarah; Hooper, Paula; Knuiman, Matthew; Giles-Corti, Billie

2016-11-01

Fear of crime is implicated as a risk factor for poorer mental health, yet few studies have explored whether there is a causal relationship between fear of crime and health, or tested the direction of the relationship. Does, for example, heightened fear of crime lead to poorer mental health, or could poorer mental health exacerbate fear of crime? RESIDE participants in Perth, Australia, completed a questionnaire three years after moving to their neighbourhood (2007-2008, n = 1230), and again four years later (2011-2012, n = 531). The impact of fear of crime on psychological distress (Kessler-6) was examined in SAS using the Proc Mixed procedure (marginal repeated measures model with unrestricted variance pattern). Models controlled for demographics and time, and progressively adjusted for avoidance behaviours (i.e., walking, community participation, social cohesion). This approach was repeated with psychological distress as the independent variable and fear of crime as the outcome. For each increase in one standard deviation (SD) in fear of crime, psychological distress increased by 0.680 (p = 0.0001), however in the reversed models, for each one SD increase in psychological distress, fear of crime increased by 0.152 (p = 0.0001). To help explain these results, temporal order models examined whether baseline values predicted follow-up values. There was a significant association between psychological distress (at baseline) and fear of crime (at follow-up), but no association between fear of crime (at baseline) and psychological distress (at follow-up). The findings suggest a bi-directional relationship exists between fear of crime and mental health, however it appears that higher psychological distress over time leads to higher fear of crime, rather than the reverse. Furthermore, the pathway connecting fear of crime and mental health appears to be direct, rather than via constrained social and physical activities. Copyright © 2016 Elsevier Ltd. All rights reserved.

Impact of dietary precursor ALA versus preformed DHA on fatty acid profiles of eggs, liver and adipose tissue and expression of genes associated with hepatic lipid metabolism in laying hens.

PubMed

Neijat, M; Eck, P; House, J D

2017-04-01

Dietary omega-3 polyunsaturated fatty acids (n-3 PUFA), including alpha-linolenic acid (ALA) and preformed longer chain PUFA (LCPUFA, particularly docosahexaenoic acid, DHA) differ in their egg LCPUFA enrichment efficiency. However, mechanisms leading to these differences are unclear. To this end, omega-3 PUFA contents in different lipid classes, including triacylglycerol (TAG) and total phospholipid (PL) in yolk, liver and adipose, as well as the expression of key hepatic enzymes in lipid metabolism were evaluated in laying hens in response to changes in dietary supply. Seventy Lohmann hens (n=10/treatment) consumed either a control diet (0.03% total omega-3 PUFA), or the control with supplementation (0.20%, 0.40% and 0.60% total omega-3 PUFA) from either flaxseed oil or algal product, as sources of ALA (precursor) or DHA (preformed), respectively. The study was arranged in a completely randomized design, and data were analyzed using the Proc Mixed procedure of SAS. ALA accumulated as a function of intake (P<0.0001) in total and lipid classes of yolk, liver and adipose (TAG only) for ALA- and DHA-fed hens. Unlike flaxseed oil, preformed-DHA contributed to greater (P<0.0001) accumulation of LCPUFA in yolk total PL and TAG pool, as well as adipose TAG. This may relate to elevated (P<0.0001) expression of acyl-CoA synthetase (ACSL1). No difference in hepatic EPA level in total lipids was noted between both treatment groups; EPA liver =2.1493x-0.0064; R 2 =0.70, P<0.0001 (x=dietary omega-3 PUFA). The latter result may highlight the role of hepatic EPA in the regulation of LCPUFA metabolism in laying hens. Copyright © 2017. Published by Elsevier Ltd.

Sub-grid scale combustion models for large eddy simulation of unsteady premixed flame propagation around obstacles.

PubMed

Di Sarli, Valeria; Di Benedetto, Almerinda; Russo, Gennaro

2010-08-15

In this work, an assessment of different sub-grid scale (sgs) combustion models proposed for large eddy simulation (LES) of steady turbulent premixed combustion (Colin et al., Phys. Fluids 12 (2000) 1843-1863; Flohr and Pitsch, Proc. CTR Summer Program, 2000, pp. 61-82; Kim and Menon, Combust. Sci. Technol. 160 (2000) 119-150; Charlette et al., Combust. Flame 131 (2002) 159-180; Pitsch and Duchamp de Lageneste, Proc. Combust. Inst. 29 (2002) 2001-2008) was performed to identify the model that best predicts unsteady flame propagation in gas explosions. Numerical results were compared to the experimental data by Patel et al. (Proc. Combust. Inst. 29 (2002) 1849-1854) for premixed deflagrating flame in a vented chamber in the presence of three sequential obstacles. It is found that all sgs combustion models are able to reproduce qualitatively the experiment in terms of step of flame acceleration and deceleration around each obstacle, and shape of the propagating flame. Without adjusting any constants and parameters, the sgs model by Charlette et al. also provides satisfactory quantitative predictions for flame speed and pressure peak. Conversely, the sgs combustion models other than Charlette et al. give correct predictions only after an ad hoc tuning of constants and parameters. Copyright 2010 Elsevier B.V. All rights reserved.

Light emitting diodes as a monitor to study P-type doping of GaN-based heterostructures grown by MOVPE

NASA Astrophysics Data System (ADS)

Schineller, B.; Guttzeit, A.; Vertommen, F.; Schön, O.; Heuken, M.; Heime, K.; Beccard, R.

1998-06-01

The group-III nitrides are an interesting material system for applications in the blue spectral region and for high-power and high-temperature devices. P-type doping in the metalorganic vapour-phase growth process, however, suffers from the material's high-background donor concentration. Hydrogen passivation furthermore decreases the number of activated acceptors [N.M. Johnson, W. Götz, J. Neugebauer, C.G. van de Walle, Mater. Res. Soc. Symp. Proc. 395 (1996) 723; A. Bosin, V. Fiorentini, Mater. Res. Soc. Symp. Proc. 395 (1996) 503] [1, 2]. Thermal treatment was found to increase the amount of activated acceptors [S.J. Pearton, S. Bendi, K.S. Jones, V. Krishnamoorthy, R.G. Wilson, F. Ren, R.F. Karlicek, R.A. Stall, Appl. Phys. Lett. 69 (1996) 1879; Y. Li, Y. Lu, H. Shen, M. Wraback, C.Y. Hwang, M. Schurman, W. Mayo, T. Salagaj, R.A. Stall, Mater. Res. Soc. Symp. Proc. 395 (1996) 369] [3, 4]. We have investigated the influences of thermal treatment process steps on the electrical and optical properties of Mg-doped single layers and used the results to fabricate AlGaN/GaN heterostructure LED layers. A simple test structure was employed to assess the electro-optical properties of the LED structures.

Electromagnetic field effects in explosives

NASA Astrophysics Data System (ADS)

Tasker, Douglas

2009-06-01

Present and previous research on the effects of electromagnetic fields on the initiation and detonation of explosives and the electromagnetic properties of explosives are reviewed. Among the topics related to detonating explosives are: measurements of conductivity; enhancement of performance; and control of initiation and growth of reaction. Hayes...()^1 showed a strong correlation of peak electrical conductivity with carbon content of the detonation products. Ershov.......^2 linked detailed electrical conductivity measurements with reaction kinetics and this work was extended to enhance detonation performance electrically;...^3 for this, electrical power densities of the order of 100 TW/m^2 of explosive surface normal to the detonation front were required. However, small electrical powers are required to affect the initiation and growth of reaction.......^4,5 A continuation of this work will be reported. LA-UR 09-00873 .^1 B. Hayes, Procs. of 4th Symposium (International) on Detonation (1965), p. 595. ^2 A. Ershov, P. Zubkov, and L. Luk'yanchikov, Combustion, Explosion, and Shock Waves 10, 776-782 (1974). ^3 M. Cowperthwaite, Procs. 9th Detonation Symposium (1989), p. 388-395. ^4 M. A. Cook and T. Z. Gwyther, ``Influence of Electric Fields on Shock to Detonation Transition,'' (1965). ^5 D. Salisbury, R. Winter, and L. Biddle, Procs. of the APS Topical Conference on Shock Compression of Condensed Matter (2005) p. 1010-1013.

REddyProc: Enabling researchers to process Eddy-Covariance data

NASA Astrophysics Data System (ADS)

Wutzler, Thomas; Moffat, Antje; Migliavacca, Mirco; Knauer, Jürgen; Menzer, Olaf; Sickel, Kerstin; Reichstein, Markus

2017-04-01

Analysing Eddy-Covariance measurements involves extensive processing, which puts technical labour to researchers. There is a need to overcome difficulties in data processing associated with deploying, adapting and using existing software and online tools. We tackled that need by developing the REddyProc package in the open source cross-platform language R that provides standard processing routines for reading half-hourly files from different formats, including from the recently released FLUXNET 2015 dataset, uStar threshold estimation and associated uncertainty, gap-filling, flux partitioning (both night-time or daytime based), and visualization of results. Although different in some features, the package mimics the online tool that has been extensively used by many users and site Principal Investigators (PIs) in the last years, and available on the website of the Max Planck Institute for Biogeochemistry. Generally, REddyProc results are statistically equal to results based on the state-of the art tools. The provided routines can be easily installed, configured, used, and integrated with further analysis. Hence the eddy covariance community will benefit from using the provided package allowing easier integration of standard processing with extended analysis. This complements activities by AmeriFlux, ICOS, NEON, and other regional networks for developing codes for standardized data processing of multiple sites in FLUXNET.

Operational Control Procedures for the Activated Sludge Process, Part III-A: Calculation Procedures.

ERIC Educational Resources Information Center

West, Alfred W.

This is the second in a series of documents developed by the National Training and Operational Technology Center describing operational control procedures for the activated sludge process used in wastewater treatment. This document deals exclusively with the calculation procedures, including simplified mixing formulas, aeration tank…

Use of NDT equipment for construction quality control of hot mix asphalt pavements

DOT National Transportation Integrated Search

2006-08-01

The focus of the study has been to evaluate the utility of seismic methods in the quality management of the hot mix asphalt layers. Procedures are presented to measure the target field moduli of hot mix asphalt (HMA) with laboratory seismic methods, ...

New generation mix-designs : laboratory testing and construction of the APT test sections.

DOT National Transportation Integrated Search

2010-03-01

Recent changes to the Texas HMA mix-design procedures such as adaption of the higher PG asphalt-binder grades and the Hamburg test have ensured that the mixes routinely used on the Texas highways are not prone to rutting. However, performance concern...

Polymorphisms in antithrombin and in tissue factor pathway inhibitor genes are associated with recurrent pregnancy loss.

PubMed

Guerra-Shinohara, Elvira M; Bertinato, Juliano Felix; Tosin Bueno, Carolina; Cordeiro da Silva, Kelma; Burlacchini de Carvalho, Mário Henrique; Pulcineli Vieira Francisco, Rossana; Zugaib, Marcelo; Cerda, Alvaro; Morelli, Vânia Maris

2012-10-01

Recurrent pregnancy loss (RPL) is a multifactorial condition. The effect of antithrombin (SERPINC1), protein C (PROC), thrombomodulin (THBD) and tissue factor pathway inhibitor (TFPI) single nucleotide polymorphisms (SNPs) on the risk of RPL is thus far unknown. Our objective was to determine the association of SNPs in the above mentioned genes with RPL. We included 117 non-pregnant women with three or more consecutive losses prior to 20 weeks of pregnancy without a previous history of carrying a fetus to viability, and 264 healthy fertile non-pregnant women who had at least two term deliveries and no known pregnancy losses. The PROC (rs1799809 and rs1799808), SERPINC1 (rs2227589), THBD (rs1042579) and TFPI (rs10931292, rs8176592 and rs10153820) SNPs were analysed by Real Time PCR. Genotype frequencies for PROC 2418A>G, PROC 2405C>T, THBD 1418C>T, TFPI (T-33C and TFPI C-399T) SNPs were similar in cases and controls. The carriers of SERPINC1 786A allele (GA + AA genotypes) had an increased risk for RPL (odds ratio [OR]: 1.77, 95% confidence interval [CI]: 1.05-3.00, p= 0.034) while women carrying the TFPI -287C allele (TC + CC genotypes) had a protection effect on having RPL (OR: 0.46, 95% CI: 0.26-0.83, p= 0.009). The TCC haplotype for TFPI T-33C/ TFPI T-287C/ TFPI C-399T SNPs was less frequent in cases (5.7%) than in controls (11.6%) (OR: 0.45, 95% CI: 0.23-0.90, p= 0.025). In conclusion, our data indicate that SERPINC1 786G>A variant increases the risk for RPL, while TFPI T-287C variant is protective; however, further studies are required to confirm our findings.

Low doses of allergen and probiotic supplementation separately or in combination alleviate allergic reactions to cow β-lactoglobulin in mice.

PubMed

Thang, Cin L; Boye, Joyce I; Zhao, Xin

2013-02-01

Probiotic supplementation and oral tolerance induction can reduce certain types of food allergy. The objectives of this study were to investigate the allergy-reducing effects of probiotics (VSL#3) and/or oral tolerance induction via low doses of an allergen supplementation in β-lactoglobulin (BLG)-sensitized mice. Three-week-old, male BALB/c mice were divided into 6 groups (n = 8/group): sham-sensitized negative control (CTL-), BLG-sensitized positive control (CTL+), oral tolerance-induced and BLG-sensitized group (OT), probiotic-supplemented OT group (OTP), probiotic-supplemented CTL- (PRO), and probiotic-supplemented and BLG-sensitized (PROC) groups. Mice were i.p. sensitized with BLG and alum and then orally challenged with BLG. Immunological responses were assessed by monitoring hypersensitivity scores and measuring levels of BLG-specific serum Igs, total serum IgE and fecal IgA, and cytokines from serum and spleen lysates. Hypersensitivity scores were significantly lower in the PROC (2.00 ± 0.53), OT (0.75 ± 0.46), and OTP mice (1.00 ± 0.53) than in the CTL+ mice (2.63 ± 0.52) as were BLG-specific serum IgE concentrations (34.3 ± 10, 0.442 ± 0.36, 3.54 ± 3.5, and 78.5 ± 8.7 μg/L for PROC, OT, OTP, and CTL+, respectively). Our results suggest that supplementation of VSL#3 suppressed the allergic reaction mainly through increased intestinal secretary IgA (sIgA) in PROC mice, and oral tolerance offered allergen-specific protective effects to BLG-induced allergy, probably through CD4+CD25+ regulatory T cell-mediated active suppression. In OTP mice, probiotics did not induce a further reduction of hypersensitivity score compared with OT mice but may provide additional protection to unforeseen nonspecific challenges through increased intestinal sIgA.

Improved silicon carbide for advanced heat engines

NASA Technical Reports Server (NTRS)

Whalen, Thomas J.; Mangels, J. A.

1986-01-01

The development of silicon carbide materials of high strength was initiated and components of complex shape and high reliability were formed. The approach was to adapt a beta-SiC powder and binder system to the injection molding process and to develop procedures and process parameters capable of providing a sintered silicon carbide material with improved properties. The initial effort was to characterize the baseline precursor materials, develop mixing and injection molding procedures for fabricating test bars, and characterize the properties of the sintered materials. Parallel studies of various mixing, dewaxing, and sintering procedures were performed in order to distinguish process routes for improving material properties. A total of 276 modulus-of-rupture (MOR) bars of the baseline material was molded, and 122 bars were fully processed to a sinter density of approximately 95 percent. Fluid mixing techniques were developed which significantly reduced flaw size and improved the strength of the material. Initial MOR tests indicated that strength of the fluid-mixed material exceeds the baseline property by more than 33 percent. the baseline property by more than 33 percent.

Protein structure refinement using a quantum mechanics-based chemical shielding predictor.

PubMed

Bratholm, Lars A; Jensen, Jan H

2017-03-01

The accurate prediction of protein chemical shifts using a quantum mechanics (QM)-based method has been the subject of intense research for more than 20 years but so far empirical methods for chemical shift prediction have proven more accurate. In this paper we show that a QM-based predictor of a protein backbone and CB chemical shifts (ProCS15, PeerJ , 2016, 3, e1344) is of comparable accuracy to empirical chemical shift predictors after chemical shift-based structural refinement that removes small structural errors. We present a method by which quantum chemistry based predictions of isotropic chemical shielding values (ProCS15) can be used to refine protein structures using Markov Chain Monte Carlo (MCMC) simulations, relating the chemical shielding values to the experimental chemical shifts probabilistically. Two kinds of MCMC structural refinement simulations were performed using force field geometry optimized X-ray structures as starting points: simulated annealing of the starting structure and constant temperature MCMC simulation followed by simulated annealing of a representative ensemble structure. Annealing of the CHARMM structure changes the CA-RMSD by an average of 0.4 Å but lowers the chemical shift RMSD by 1.0 and 0.7 ppm for CA and N. Conformational averaging has a relatively small effect (0.1-0.2 ppm) on the overall agreement with carbon chemical shifts but lowers the error for nitrogen chemical shifts by 0.4 ppm. If an amino acid specific offset is included the ProCS15 predicted chemical shifts have RMSD values relative to experiments that are comparable to popular empirical chemical shift predictors. The annealed representative ensemble structures differ in CA-RMSD relative to the initial structures by an average of 2.0 Å, with >2.0 Å difference for six proteins. In four of the cases, the largest structural differences arise in structurally flexible regions of the protein as determined by NMR, and in the remaining two cases, the large structural change may be due to force field deficiencies. The overall accuracy of the empirical methods are slightly improved by annealing the CHARMM structure with ProCS15, which may suggest that the minor structural changes introduced by ProCS15-based annealing improves the accuracy of the protein structures. Having established that QM-based chemical shift prediction can deliver the same accuracy as empirical shift predictors we hope this can help increase the accuracy of related approaches such as QM/MM or linear scaling approaches or interpreting protein structural dynamics from QM-derived chemical shift.

On Fitting Generalized Linear Mixed-effects Models for Binary Responses using Different Statistical Packages

PubMed Central

Zhang, Hui; Lu, Naiji; Feng, Changyong; Thurston, Sally W.; Xia, Yinglin; Tu, Xin M.

2011-01-01

Summary The generalized linear mixed-effects model (GLMM) is a popular paradigm to extend models for cross-sectional data to a longitudinal setting. When applied to modeling binary responses, different software packages and even different procedures within a package may give quite different results. In this report, we describe the statistical approaches that underlie these different procedures and discuss their strengths and weaknesses when applied to fit correlated binary responses. We then illustrate these considerations by applying these procedures implemented in some popular software packages to simulated and real study data. Our simulation results indicate a lack of reliability for most of the procedures considered, which carries significant implications for applying such popular software packages in practice. PMID:21671252

Effect of mixing techniques on bacterial attachment and disinfection time of polyether impression material

PubMed Central

Guler, Umut; Budak, Yasemin; Ruh, Emrah; Ocal, Yesim; Canay, Senay; Akyon, Yakut

2013-01-01

Objective: The aim of this study was 2-fold. The first aim was to evaluate the effects of mixing technique (hand-mixing or auto-mixing) on bacterial attachment to polyether impression materials. The second aim was to determine whether bacterial attachment to these materials was affected by length of exposure to disinfection solutions. Materials and Methods: Polyether impression material samples (n = 144) were prepared by hand-mixing or auto-mixing. Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa were used in testing. After incubation, the bacterial colonies were counted and then disinfectant solution was applied. The effect of disinfection solution was evaluated just after the polymerization of impression material and 30 min after polymerization. Differences in adherence of bacteria to the samples prepared by hand-mixing and to those prepared by auto-mixing were assessed by Kruskal-Wallis and Mann-Whitney U-tests. For evaluating the efficiency of the disinfectant, Kruskal-Wallis multiple comparisons test was used. Results: E. coli counts were higher in hand-mixed materials (P < 0.05); no other statistically significant differences were found between hand- and auto-mixed materials. According to the Kruskal-Wallis test, significant differences were found between the disinfection procedures (Z > 2.394). Conclusion: The methods used for mixing polyether impression material did not affect bacterial attachment to impression surfaces. In contrast, the disinfection procedure greatly affects decontamination of the impression surface. PMID:24966729

Effect of mixing techniques on bacterial attachment and disinfection time of polyether impression material.

PubMed

Guler, Umut; Budak, Yasemin; Ruh, Emrah; Ocal, Yesim; Canay, Senay; Akyon, Yakut

2013-09-01

The aim of this study was 2-fold. The first aim was to evaluate the effects of mixing technique (hand-mixing or auto-mixing) on bacterial attachment to polyether impression materials. The second aim was to determine whether bacterial attachment to these materials was affected by length of exposure to disinfection solutions. Polyether impression material samples (n = 144) were prepared by hand-mixing or auto-mixing. Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa were used in testing. After incubation, the bacterial colonies were counted and then disinfectant solution was applied. The effect of disinfection solution was evaluated just after the polymerization of impression material and 30 min after polymerization. Differences in adherence of bacteria to the samples prepared by hand-mixing and to those prepared by auto-mixing were assessed by Kruskal-Wallis and Mann-Whitney U-tests. For evaluating the efficiency of the disinfectant, Kruskal-Wallis multiple comparisons test was used. E. coli counts were higher in hand-mixed materials (P < 0.05); no other statistically significant differences were found between hand- and auto-mixed materials. According to the Kruskal-Wallis test, significant differences were found between the disinfection procedures (Z > 2.394). The methods used for mixing polyether impression material did not affect bacterial attachment to impression surfaces. In contrast, the disinfection procedure greatly affects decontamination of the impression surface.

Drug residues recovered in feed after various feedlot mixer truck cleanout procedures.

PubMed

Van Donkersgoed, Joyce; Sit, Dan; Gibbons, Nicole; Ramogida, Caterina; Hendrick, Steve

2010-01-01

A study was conducted to determine the effectiveness of two methods of equipment cleanout, sequencing or flushing, for reducing drug carryover in feedlot mixer trucks. Feed samples were collected from total mixed rations before and after various feed mixer equipment cleanout procedures. Medicated rations contained either 11 ppm of tylosin or 166 or 331 ppm of chlortetracycline. There were no differences between sequencing and flushing or between flushing with dry barley and flushing with barley silage in the median proportion of drug recovered in the next ration. A larger drug reduction was achieved using flush material at a volume of 10 versus 5% of the mixer capacity and mixing the flush material for 3 versus 4 min. Regardless of the drug or prescription concentrations in the total mixed rations or the equipment cleanout procedure used, concentrations of chlortetracycline and tylosin recovered were very low.

Establishment of QC/QA procedures for open-graded mixes : final report.

DOT National Transportation Integrated Search

1998-09-01

The State of Oregon has employed the use of porous concrete surfaces (E- and F-mixes) since the 1970s. The use of porous mixes has increased substantially in the past five years. Previously, no work had been done to evaluate whether the quality contr...

Time-dependent and time-independent approaches to study effects of degenerate electronic states

NASA Astrophysics Data System (ADS)

Baer, Michael; Yahalom, Asher; Englman, Robert

1998-10-01

Two types of phases are discussed in this article: (1) The topological phase as introduced by Berry [Proc. R. Soc. London, Ser. A 392, 45(1984)] and Aharonov and Anandan [Phys. Rev. Lett. 58, 1593 (1987)] and (2) the Longuet-Higgins phase [Proc. R. Soc. London, Ser. A 344, 147 (1975)]. The two types of phases have a common origin, namely the multivaluedness of the electronic adiabatic basis, a phenomenon associated with the existence of a degeneracy in configuration space. It will be shown, by studying an electronic model Hamiltonian that arises from a two-state approximation to the Mathieu equation, that the two phases differ from each other substantially, coinciding only in the adiabatic limit upon completion of a cycle.

Source-receptor matrix calculation with a Lagrangian particle dispersion model in backward mode

NASA Astrophysics Data System (ADS)

Seibert, P.; Frank, A.

2003-04-01

A method for the calculation of source-receptor (s-r) relationships (sensitivity of a trace substance concentration at some place and time to emission at some place and time) with Lagrangian particle models has been derived and presented previously (Air Pollution Modeling and its Application XIV, Proc. of ITM Boulder 2000). Now, the generalisation to any linear s-r relationship, including dry and wet deposition, decay etc., is presented. It was implemented in the model FLEXPART and tested extensively in idealised set-ups. These tests turned out to be very useful for finding minor model bugs and inaccuracies, and can be recommended generally for model testing. Recently, a convection scheme has been integrated in FLEXPART which was also tested. Both source and receptor can be specified in mass mixing ratio or mass units. Properly taking care of this is quite relevant for sources and receptors at different levels in the atmosphere. Furthermore, we present a test with the transport of aerosol-bound Caesium-137 from the areas contaminated by the Chernobyl disaster to Stockholm during one month.

Family interactions in adoptive compared to nonadoptive families.

PubMed

Rueter, Martha A; Keyes, Margaret A; Iacono, William G; McGue, Matt

2009-02-01

Despite the large and growing numbers of adoptive families, little research describes interactions in families with adopted adolescents. Yet, adopted adolescents' increased risk for adjustment problems, combined with the association between family interactions and adolescent adjustment in nonadoptive families, raises questions about differences in adoptive and nonadoptive family interactions. We compared observed and self-reported family interactions between 284 adoptive and 208 nonadoptive families and within 123 families with 1 adopted and 1 nonadopted adolescent. Adolescents averaged 14.9 years of age. Comparisons were made using analysis of variance incorporating hierarchical linear methods in SAS PROC MIXED to control family-related correlations in the data. Parents and children reported more conflict in adoptive families when compared with nonadoptive families. Families with 1 adopted and 1 nonadopted adolescent reported more conflict between parents and adopted adolescents. Observed parental behavior was similar across adoptive and nonadoptive children although adopted adolescents were less warm and, in families with 2 adopted children, more conflictual than nonadopted adolescents. These findings suggest a need for further investigation of the association between family interactions and adopted adolescent problem behavior. Copyright 2009 APA, all rights reserved.

Family Interactions in Adoptive Compared to Nonadoptive Families

PubMed Central

Rueter, Martha A.; Keyes, Margaret A.; Iacono, William G.; McGue, Matt

2009-01-01

Despite the large and growing numbers of adoptive families, little research describes interactions in families with adopted adolescents. Yet, adopted adolescents’ increased risk for adjustment problems, combined with the association between family interactions and adolescent adjustment in nonadoptive families, raises questions about differences in adoptive and nonadoptive family interactions. We compared observed and self-reported family interactions between 284 adoptive and 208 nonadoptive families and within 123 families with 1 adopted and 1 nonadopted adolescent. Adolescents averaged 14.9 years of age. Comparisons were made using analysis of variance incorporating hierarchical linear methods in SAS PROC MIXED to control family-related correlations in the data. Parents and children reported more conflict in adoptive families when compared with nonadoptive families. Families with 1 adopted and 1 nonadopted adolescent reported more conflict between parents and adopted adolescents. Observed parental behavior was similar across adoptive and nonadoptive children although adopted adolescents were less warm and, in families with 2 adopted children, more conflictual than nonadopted adolescents. These findings suggest a need for further investigation of the association between family interactions and adopted adolescent problem behavior. PMID:19203160

Biotechnology

NASA Image and Video Library

2003-05-05

Aboard the International Space Station (ISS), the Tissue Culture Module (TCM) is the stationary bioreactor vessel in which cell cultures grow. However, for the Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI), color polystyrene beads are used to measure the effectiveness of various mixing procedures. The beads are similar in size and density to human lymphoid cells. Uniform mixing is a crucial component of CBOSS experiments involving the immune response of human lymphoid cell suspensions. The goal is to develop procedures that are both convenient for the flight crew and are optimal in providing uniform and reproducible mixing of all components, including cells. The average bead density in a well mixed TCM will be uniform, with no bubbles, and it will be measured using the absorption of light. In this photograph, beads are trapped in the injection port, with bubbles forming shortly after injection.

V79 Chinese-hamster cells rendered resistant to high cadmium concentration also become resistant to oxidative stress.

PubMed Central

Mello-Filho, A C; Chubatsu, L S; Meneghini, R

1988-01-01

Chinese hamster cells (V79) resistant to high concentrations of Cd2+ in the medium were obtained by using the procedure of Beach & Palmiter [(1981) Proc. Natl. Acad. Sci. U.S.A. 78, 2110-2114], which in mouse led to amplification of metallothionein (MT) genes and to an enrichment in cellular MT. The Cd-resistant V79 clones isolated were significantly more resistant than parental cells to oxidative stress by extracellular H2O2 or a mixture of H2O2 and superoxide anion (O2-) generated by xanthine oxidase plus acetaldehyde. On a per-cell basis, there was no difference between the two cells in their total H2O2-decomposing or O2-(-)dismutating activity. The most likely explanation is that an enrichment in MT content in the Cd-resistant cells was responsible for this effect, because of the antioxidant properties already described for this protein. Images Fig. 2. PMID:2851992

On a method for generating inequalities for the zeros of certain functions

NASA Astrophysics Data System (ADS)

Gatteschi, Luigi; Giordano, Carla

2007-10-01

In this paper we describe a general procedure which yields inequalities satisfied by the zeros of a given function. The method requires the knowledge of a two-term approximation of the function with bound for the error term. The method was successfully applied many years ago [L. Gatteschi, On the zeros of certain functions with application to Bessel functions, Nederl. Akad. Wetensch. Proc. Ser. 55(3)(1952), Indag. Math. 14(1952) 224-229] and more recently too [L. Gatteschi and C. Giordano, Error bounds for McMahon's asymptotic approximations of the zeros of the Bessel functions, Integral Transform Special Functions, 10(2000) 41-56], to the zeros of the Bessel functions of the first kind. Here, we present the results of the application of the method to get inequalities satisfied by the zeros of the derivative of the function . This function plays an important role in the asymptotic study of the stationary points of the solutions of certain differential equations.

Numerical solutions of ideal quantum gas dynamical flows governed by semiclassical ellipsoidal-statistical distribution.

PubMed

Yang, Jaw-Yen; Yan, Chih-Yuan; Diaz, Manuel; Huang, Juan-Chen; Li, Zhihui; Zhang, Hanxin

2014-01-08

The ideal quantum gas dynamics as manifested by the semiclassical ellipsoidal-statistical (ES) equilibrium distribution derived in Wu et al. (Wu et al . 2012 Proc. R. Soc. A 468 , 1799-1823 (doi:10.1098/rspa.2011.0673)) is numerically studied for particles of three statistics. This anisotropic ES equilibrium distribution was derived using the maximum entropy principle and conserves the mass, momentum and energy, but differs from the standard Fermi-Dirac or Bose-Einstein distribution. The present numerical method combines the discrete velocity (or momentum) ordinate method in momentum space and the high-resolution shock-capturing method in physical space. A decoding procedure to obtain the necessary parameters for determining the ES distribution is also devised. Computations of two-dimensional Riemann problems are presented, and various contours of the quantities unique to this ES model are illustrated. The main flow features, such as shock waves, expansion waves and slip lines and their complex nonlinear interactions, are depicted and found to be consistent with existing calculations for a classical gas.

Property Control of (Perfluorinated Ionomer)/(Inorganic Oxide) Composites by Tailoring the Nanoscale Morphology

DTIC Science & Technology

1994-06-10

RPeport PROPERTY CONTROL OF ( PERFLUORINATED IONOMER)/(INORGANIC OXIDE) COMPOSITES BY TAILORING THE NANOSCALE MORPHOLOGY Kenneth A. Mauritz and Robert...Concept ......................................... 45 B. [Si0 2 -TiO2 (mixed)]/Nafion Nanocomposites: Sorption of Pre-Mixed Alkoxides...Nanocomposites: Sorption of Pre- Mixed Alkoxides ......................................... 49 A. Experimental Procedure ............................. 49 B

On fitting generalized linear mixed-effects models for binary responses using different statistical packages.

PubMed

Zhang, Hui; Lu, Naiji; Feng, Changyong; Thurston, Sally W; Xia, Yinglin; Zhu, Liang; Tu, Xin M

2011-09-10

The generalized linear mixed-effects model (GLMM) is a popular paradigm to extend models for cross-sectional data to a longitudinal setting. When applied to modeling binary responses, different software packages and even different procedures within a package may give quite different results. In this report, we describe the statistical approaches that underlie these different procedures and discuss their strengths and weaknesses when applied to fit correlated binary responses. We then illustrate these considerations by applying these procedures implemented in some popular software packages to simulated and real study data. Our simulation results indicate a lack of reliability for most of the procedures considered, which carries significant implications for applying such popular software packages in practice. Copyright © 2011 John Wiley & Sons, Ltd.

Microalgal biohydrogen production considering light energy and mixing time as the two key features for scale-up.

PubMed

Oncel, S; Sabankay, M

2012-10-01

This study focuses on a scale-up procedure considering two vital parameters light energy and mixing for microalgae cultivation, taking Chlamydomonas reinhardtii as the model microorganism. Applying two stage hydrogen production protocol to 1L flat type and 2.5L tank type photobioreactors hydrogen production was investigated with constant light energy and mixing time. The conditions that provide the shortest transfer time to anaerobic culture (light energy; 2.96 kJ s(-1)m(-3) and mixing time; 1 min) and highest hydrogen production rate (light energy; 1.22 kJ s(-1)m(-3) and mixing time; 2.5 min) are applied to 5L photobioreactor. The final hydrogen production for 5L system after 192 h was measured as 195 ± 10 mL that is comparable with the other systems is a good validation for the scale-up procedure. Copyright © 2012 Elsevier Ltd. All rights reserved.

Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI)

NASA Technical Reports Server (NTRS)

2003-01-01

Aboard the International Space Station (ISS), the Tissue Culture Module (TCM) is the stationary bioreactor vessel in which cell cultures grow. However, for the Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI), color polystyrene beads are used to measure the effectiveness of various mixing procedures. Uniform mixing is a crucial component of CBOSS experiments involving the immune response of human lymphoid cell suspensions. In this picture, the beads are trapped in the injection port shortly after injection. Swirls of beads indicate, event to the naked eye, the contents of the TCM are not fully mixed. The beads are similar in size and density to human lymphoid cells. The goal is to develop procedures that are both convenient for the flight crew and are optimal in providing uniform and reproducible mixing of all components, including cells. The average bead density in a well mixed TCM will be uniform, with no bubbles, and it will be measured using the absorption of light

Mixed Stationary Liquid Phases for Gas-Liquid Chromatography.

ERIC Educational Resources Information Center

Koury, Albert M.; Parcher, Jon F.

1979-01-01

Describes a laboratory technique for use in an undergraduate instrumental analysis course that, using the interpretation of window diagrams, prepares a mixed liquid phase column for gas-liquid chromatography. A detailed procedure is provided. (BT)

A Modular Set of Mixed Reality Simulators for blind and Guided Procedures

DTIC Science & Technology

2015-08-01

W81XWH-14-1-0113 – Year 1 Report University of Florida Page 1 of 12 AWARD NUMBER: W81XWH-14-1-0113 TITLE: A Modular Set of Mixed Reality...Simulators for “blind” and Guided Procedures PRINCIPAL INVESTIGATOR: Samsun Lampotang CONTRACTING ORGANIZATION: University of Florida Gainesville, FL...designated by other documentation. W81XWH-14-1-0113 – Year 1 Report University of Florida Page 2 of 12 REPORT DOCUMENTATION PAGE Form Approved OMB No

Circulating progesterone concentrations in nonlactating Holstein cows during reuse of intravaginal progesterone implants sanitized by autoclave or chemical disinfection.

PubMed

Melo, L F; Monteiro, P L J; Oliveira, L H; Guardieiro, M M; Drum, J N; Wiltbank, M C; Sartori, R

2018-04-01

The aim of this study was to compare plasma progesterone (P4) concentrations in nonlactating, multiparous Holstein cows (n = 24) treated with 2 types of intravaginal implants containing either 1.0 or 1.9 g of P4 either at the first use or during reuse of the implants after sanitizing the implant by autoclave or chemical disinfection. In a completely randomized design with a 2 × 3 factorial arrangement and 2 replicates, every cow underwent 2 of 6 treatments. Two sources of P4 [controlled internal drug release (1.9 g of P4) from Zoetis (São Paulo, Brazil), and Sincrogest (1.0 g of P4) from Ourofino (Cravinhos, Brazil)] and 3 types of processing, new (N), reused after autoclave (RA), and reused after chemical disinfection (RC), were used. After inducing luteolysis to avoid endogenous circulating P4, the cows were randomized in 1 of 6 treatments (1.9 g of N, 1.9 g of RA, 1.9 g of RC, 1.0 g of N, 1.0 g of RA, and 1.0 g RC). Cows were treated with the implants for 8 d and during this period blood samples were collected at 0, 2, 12, 24, 48, 72, 96, 120, 144, 168, and 192 h. Statistical analyses were performed using Proc-Mixed and the mean ± standard error of the mean P4 concentrations were calculated using the Proc-Means procedures of SAS 9.4 (SAS Institute Inc., Cary, NC). No interaction between treatments was observed. Comparing types of implant, average P4 concentrations during treatments were greater for 1.9 g than 1.0 g (1.46 vs. 1.14 ± 0.04 ng/mL). When types of processing were compared, average P4 concentrations did not differ between autoclaved and new inserts (1.46 vs. 1.37 ± 0.05 ng/mL; respectively), but both were greater than chemically disinfected implants (1.09 ± 0.04 ng/mL). Within 1.9-g P4 inserts, P4 concentrations from autoclaved implants were greater than new, which were greater than chemically disinfected (1.67 ± 0.06 vs. 1.49 ± 0.07 vs. 1.21 ± 0.05 ng/mL; respectively). For 1.0-g P4 implants, P4 concentrations from autoclaved did not differ from new, but both were greater than chemically disinfected (1.20 ± 0.08 vs. 1.24 ± 0.06 vs. 0.97 ± 0.05 ng/mL; respectively). In conclusion, the mean plasma P4 concentration in nonlactating Holstein cows was greater for 1.9 than 1.0 g of P4 and regardless of the type of implant, the autoclaving process provided greater circulating P4 in relation to chemical disinfection, and similar or greater P4 concentrations compared with a new implant. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Ratio of dietary rumen degradable protein to rumen undegradable protein affects nitrogen partitioning but does not affect the bovine milk proteome produced by mid-lactation Holstein dairy cows.

PubMed

Tacoma, R; Fields, J; Ebenstein, D B; Lam, Y-W; Greenwood, S L

2017-09-01

Little is known about the bovine milk proteome or whether it can be affected by diet. The objective of this study was to determine if the dietary rumen degradable protein (RDP):rumen undegradable protein (RUP) ratio could alter the bovine milk proteome. Six Holstein cows (parity: 2.5 ± 0.8) in mid lactation were blocked by days in milk (80 ± 43 d in milk) and milk yield (57.5 ± 6.0 kg) and randomly assigned to treatment groups. The experiment was conducted as a double-crossover design consisting of three 21-d periods. Within each period, treatment groups received diets with either (1) a high RDP:RUP ratio (RDP treatment: 62.4:37.6% of crude protein) or (2) a low RDP:RUP ratio (RUP treatment: 51.3:48.7% of crude protein). Both diets were isonitrogenous and isoenergetic (crude protein: 18.5%, net energy for lactation: 1.8 Mcal/kg of dry matter). To confirm N and energy status of cows, dry matter intake was determined daily, rumen fluid samples were collected for volatile fatty acid analysis, blood samples were collected for plasma glucose, β-hydroxybutyrate, urea nitrogen, and fatty acid analysis, and total 24-h urine and fecal samples were collected for N analysis. Milk samples were collected to determine the general milk composition and the protein profile. Milk samples collected for high-abundance protein analysis were subjected to HPLC analysis to determine the content of α-casein, β-casein, and κ-casein, as well as α-lactalbumin and β-lactoglobulin. Samples collected for low-abundance protein analysis were fractionated, enriched using ProteoMiner treatment, and separated using sodium dodecyl sulfate-PAGE. After excision and digestion, the peptides were analyzed using liquid chromatography (LC) tandem mass spectrometry (MS/MS). The LC-MS/MS data were analyzed using PROC GLIMMIX of SAS (version 9.4, SAS Institute Inc., Cary, NC) and adjusted using the MULTTEST procedure. All other parameters were analyzed using PROC MIXED of SAS. No treatment differences were observed in dry matter intake, milk yield, general milk composition, plasma parameters, or rumen volatile fatty acid concentrations, indicating no shift in total energy or protein available. Milk urea N and plasma urea N concentrations were higher in the RDP group, indicating some shift in N partitioning due to diet. A total of 595 milk proteins were identified, with 83% of these proteins known to be involved in cellular processes. Although none of the low-abundance proteins identified by LC-MS/MS were affected by diet, feeding a diet high in RUP decreased β-casein, κ-casein, and total milk casein concentration. Further investigations of the interactions between diet and the milk protein profile are needed to manipulate the milk proteome using diet. The Authors. Published by the Federation of Animal Science Societies and Elsevier Inc. on behalf of the American Dairy Science Association®. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).

Steve Rummel | NREL

Science.gov Websites

Module Intercomparison," Proc. Solar Energies Technologies Review Meeting Nov. 7-10, 2005, NREL tech . Rummel, D.R. Myers, T.L. Stoffel, and D. Waddington, "A Comparison of Photovoltaic Calibration

SFG characterization of a cationic ONLO dye in biological thin films

NASA Astrophysics Data System (ADS)

Johnson, Lewis E.; Casford, Michael T.; Elder, Delwin L.; Davies, Paul B.; Johal, Malkiat S.

2013-10-01

Biopolymer-based thin films, such as those composed of CTMA-DNA, can be used as a host material for NLOactive dyes for applications such as electro-optic (EO) switching and second harmonic generation. Previous work by Heckman et al. (Proc. SPIE 6401, 640108-2) has demonstrated functioning DNA-based EO modulators. Improved performance requires optimization of both the first hyperpolarizabilities (β) and degree of acentric ordering exhibited by the chromophores. The cationic dye DANPY-1 (Proc. SPIE 8464, 846409-D) has a high affinity for DNA and a substantial hyperpolarizability; however, its macroscopic ordering has not been previously characterized. We have characterized the acentric ordering of the dye using sum-frequency generation (SFG) vibrational spectroscopy in surface-immobilized DNA and on planar metal and dielectric surfaces.

40 CFR Appendix E to Part 63 - Monitoring Procedure for Nonthoroughly Mixed Open Biological Treatment Systems at Kraft Pulp...

Code of Federal Regulations, 2012 CFR

2012-07-01

.... II. Definitions Biological treatment unit = wastewater treatment unit designed and operated to... last zone in the series and ending with the first zone. B. Data Collection Requirements This method is based upon modeling the nonthoroughly mixed open biological treatment unit as a series of well-mixed...

Using Mixed-Mode Contacts in Client Surveys: Getting More Bang for Your Buck

ERIC Educational Resources Information Center

Israel, Glenn D.

2013-01-01

Surveys are commonly used in Extension to identify client needs or evaluate program outcomes. This article examines how available email addresses can be incorporated into mixed-mode procedures for surveys. When mail and email addresses are used to implement a sequence of email and postal invitations in a mixed-mode survey, response rates were…

Improved silicon carbide for advanced heat engines

NASA Technical Reports Server (NTRS)

Whalen, T. J.; Winterbottom, W. L.

1986-01-01

Work performed to develop silicon carbide materials of high strength and to form components of complex shape and high reliability is described. A beta-SiC powder and binder system was adapted to the injection molding process and procedures and process parameters developed capable of providing a sintered silicon carbide material with improved properties. The initial effort has been to characterize the baseline precursor materials (beta silicon carbide powder and boron and carbon sintering aids), develop mixing and injection molding procedures for fabricating test bars, and characterize the properties of the sintered materials. Parallel studies of various mixing, dewaxing, and sintering procedures have been carried out in order to distinguish process routes for improving material properties. A total of 276 MOR bars of the baseline material have been molded, and 122 bars have been fully processed to a sinter density of approximately 95 percent. The material has a mean MOR room temperature strength of 43.31 ksi (299 MPa), a Weibull characteristic strength of 45.8 ksi (315 MPa), and a Weibull modulus of 8.0. Mean values of the MOR strengths at 1000, 1200, and 14000 C are 41.4, 43.2, and 47.2 ksi, respectively. Strength controlling flaws in this material were found to consist of regions of high porosity and were attributed to agglomerates originating in the initial mixing procedures. The mean stress rupture lift at 1400 C of five samples tested at 172 MPa (25 ksi) stress was 62 hours and at 207 MPa (30 ksi) stress was 14 hours. New fluid mixing techniques have been developed which significantly reduce flaw size and improve the strength of the material. Initial MOR tests indicate the strength of the fluid-mixed material exceeds the baseline property by more than 33 percent.

Case mix-adjusted cost of colectomy at low-, middle-, and high-volume academic centers.

PubMed

Chang, Alex L; Kim, Young; Ertel, Audrey E; Hoehn, Richard S; Wima, Koffi; Abbott, Daniel E; Shah, Shimul A

2017-05-01

Efforts to regionalize surgery based on thresholds in procedure volume may have consequences on the cost of health care delivery. This study aims to delineate the relationship between hospital volume, case mix, and variability in the cost of operative intervention using colectomy as the model. All patients undergoing colectomy (n = 90,583) at 183 academic hospitals from 2009-2012 in The University HealthSystems Consortium Database were studied. Patient and procedure details were used to generate a case mix-adjusted predictive model of total direct costs. Observed to expected costs for each center were evaluated between centers based on overall procedure volume. Patient and procedure characteristics were significantly different between volume tertiles. Observed costs at high-volume centers were less than at middle- and low-volume centers. According to our predictive model, high-volume centers cared for a less expensive case mix than middle- and low-volume centers ($12,786 vs $13,236 and $14,497, P < .01). Our predictive model accounted for 44% of the variation in costs. Overall efficiency (standardized observed to expected costs) was greatest at high-volume centers compared to middle- and low-volume tertiles (z score -0.16 vs 0.02 and -0.07, P < .01). Hospital costs and cost efficiency after an elective colectomy varies significantly between centers and may be attributed partially to the patient differences at those centers. These data demonstrate that a significant proportion of the cost variation is due to a distinct case mix at low-volume centers, which may lead to perceived poor performance at these centers. Copyright © 2016 Elsevier Inc. All rights reserved.

Making a mixed-model line more efficient and flexible by introducing a bypass line

NASA Astrophysics Data System (ADS)

Matsuura, Sho; Matsuura, Haruki; Asada, Akiko

2017-04-01

This paper provides a design procedure for the bypass subline in a mixed-model assembly line. The bypass subline is installed to reduce the effect of the large difference in operation times among products assembled together in a mixed-model line. The importance of the bypass subline has been increasing in association with the rising necessity for efficiency and flexibility in modern manufacturing. The main topics of this paper are as follows: 1) the conditions in which the bypass subline effectively functions, and 2) how the load should be distributed between the main line and the bypass subline, depending on production conditions such as degree of difference in operation times among products and the mixing ratio of products. To address these issues, we analyzed the lower and the upper bounds of the line length. Based on the results, a design procedure and a numerical example are demonstrated.

Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI)

NASA Technical Reports Server (NTRS)

2003-01-01

Aboard the International Space Station (ISS), the Tissue Culture Module (TCM) is the stationary bioreactor vessel in which cell cultures grow. However, for the Cellular Biotechnology Operations Support Systems-Fluid Dynamics Investigation (CBOSS-FDI), color polystyrene beads are used to measure the effectiveness of various mixing procedures. The beads are similar in size and density to human lymphoid cells. Uniform mixing is a crucial component of CBOSS experiments involving the immune response of human lymphoid cell suspensions. The goal is to develop procedures that are both convenient for the flight crew and are optimal in providing uniform and reproducible mixing of all components, including cells. The average bead density in a well mixed TCM will be uniform, with no bubbles, and it will be measured using the absorption of light. In this photograph, beads are trapped in the injection port, with bubbles forming shortly after injection.

Soil Biogeochemical Properties and Erosion Source Prediction Model Summary for the Buffalo Bayou Watershed, Houston, Texas

NASA Astrophysics Data System (ADS)

Ahmed, I.

2015-12-01

We draw conclusions on the research output and findings from a 4-year multidisciplinary USDA-CBG collaborative program in sustainable integrated monitoring of soil organic carbon (SOC) loss prediction via erosion. The underlying method uses the state-of-the-art stable isotope science of sediment tracing under uncertain hydrologic influences. The research finds are rooted in the (i) application of Bayesian Markov Chain Monte Carlo statistical models to assess the relationship between rainfall-runoff and soil erosion in space and time, (ii) capture of the episodic nature of rainfall events and its role in the spatial distribution of SOC loss from water erosion, (iii) stable isotope composition guided fingerprinting (source and quantity) of eroded soil, and (iv) the creation of an integrated watershed scale statistical soil loss monitoring model driven by spatial and temporal correlation of flow and stable isotope composition. The research theme was successfully applied on the urbanized Buffalo Bayou Watershed in Houston, Texas. The application brought to light novel future research conceptual outlines which will also be discussed in this deliverable to the AGU meeting. These include but not limited to: regional rainfall cluster research, physics of muddy river-bank soil and suspended sediment interaction, and friction & mobility that together make up the plasticity of soil aggregates that control erosion processes and landscape changes in a riparian corridor. References: Ahmed, I., Karim, A., Boutton, T.W., and Strom, K.B. (2013a). "Monitoring Soil Organic Carbon Loss from Erosion Using Stable Isotopes." Proc., Soil Carbon Sequestration, International Conference, May 26-29, Reykjavik, Iceland. Ahmed, I, Bouttom, T.W., Strom, K. B., Karim, A., and Irvin-Smith, N. (2013b). "Soil carbon distribution and loss monitoring in the urbanized Buffalo Bayou watershed, Houston, Texas." Proc., 4th Annual All Investigators Meeting of the North American Carbon Program, February 4-7, Albuquerque, NM. Fox, J.F. and Papanicolaou, A.N. (2008). An un-mixing model to study watershed erosion processes. Advances in Water Resources, 31, 96-108.

A randomized trial on the effects of 2010 Dietary Guidelines for Americans and Korean diet patterns on cardiovascular risk factors in overweight and obese adults.

PubMed

Schroeder, Natalia; Park, Young-Hee; Kang, Min-Sook; Kim, Yangsuk; Ha, Grace K; Kim, Haeng-Ran; Yates, Allison A; Caballero, Benjamin

2015-07-01

Dietary patterns that are considered healthy (eg, the Dietary Approaches to Stop Hypertension diet and Mediterranean diet) may be more successful in reducing typical cardiovascular disease risks compared to dietary patterns considered unhealthy (eg, energy-dense diets such as the typical American diet). This study assessed the effects of a Korean diet, the 2010 Dietary Guidelines for Americans (DGA), and a typical American diet on cardiometabolic risk factors, including lipid levels and blood pressure, in overweight, non-Asian individuals in the United States with elevated low-density lipoprotein cholesterol. The study was a three-period crossover, controlled-feeding study from January 2012 to May 2012. Thirty-one subjects were randomly allocated to one of six possible sequential orders for consuming the three diets for 4 weeks, each separated by a 10-day break. Data analysis included 27 subjects on the Korean diet periods and 29 in the DGA and typical American diet periods. Subjects remained weight stable. Lipid profile, blood pressure, insulin, glucose, and 24-hour urinary sodium were determined at baseline and at the end of each diet period. The additive main effects multiplicative interactions model was used to test for a subject by diet interaction. Differences among diets were determined using a mixed-models procedure (PROC MIXED) with random intercept for each subject. Total cholesterol and low-density lipoprotein cholesterol significantly decreased on Korean (P<0.0001 and P<0.01, respectively) and DGA (P<0.01 and P<0.05, respectively) diets, but not on the typical American diet. Although an unfavorable outcome, high-density lipoprotein cholesterol significantly decreased on all three diets (Korean: P<0.0001; DGA: P<0.0001; typical American: P<0.05). No diet had a significant effect on serum triglycerides, but a slight increase in triglycerides in the Korean and decrease in the DGA resulted in a significant difference between these two diets (P<0.01). All three diets caused modest decreases in systolic and diastolic blood pressure, which reached statistical significance for DGA only (P<0.05 and P<0.01, respectively). No diet had significant effect on fasting insulin, whereas fasting glucose decreased significantly on the Korean (P<0.01) and typical American (P<0.05) diets only. Urinary sodium output decreased significantly on DGA (P<0.0001). After a 4-week feeding period, Korean and DGA diet patterns resulted in positive changes in cardiovascular disease risk factors. Copyright © 2015 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Protein structure refinement using a quantum mechanics-based chemical shielding predictor† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c6sc04344e Click here for additional data file.

PubMed Central

2017-01-01

The accurate prediction of protein chemical shifts using a quantum mechanics (QM)-based method has been the subject of intense research for more than 20 years but so far empirical methods for chemical shift prediction have proven more accurate. In this paper we show that a QM-based predictor of a protein backbone and CB chemical shifts (ProCS15, PeerJ, 2016, 3, e1344) is of comparable accuracy to empirical chemical shift predictors after chemical shift-based structural refinement that removes small structural errors. We present a method by which quantum chemistry based predictions of isotropic chemical shielding values (ProCS15) can be used to refine protein structures using Markov Chain Monte Carlo (MCMC) simulations, relating the chemical shielding values to the experimental chemical shifts probabilistically. Two kinds of MCMC structural refinement simulations were performed using force field geometry optimized X-ray structures as starting points: simulated annealing of the starting structure and constant temperature MCMC simulation followed by simulated annealing of a representative ensemble structure. Annealing of the CHARMM structure changes the CA-RMSD by an average of 0.4 Å but lowers the chemical shift RMSD by 1.0 and 0.7 ppm for CA and N. Conformational averaging has a relatively small effect (0.1–0.2 ppm) on the overall agreement with carbon chemical shifts but lowers the error for nitrogen chemical shifts by 0.4 ppm. If an amino acid specific offset is included the ProCS15 predicted chemical shifts have RMSD values relative to experiments that are comparable to popular empirical chemical shift predictors. The annealed representative ensemble structures differ in CA-RMSD relative to the initial structures by an average of 2.0 Å, with >2.0 Å difference for six proteins. In four of the cases, the largest structural differences arise in structurally flexible regions of the protein as determined by NMR, and in the remaining two cases, the large structural change may be due to force field deficiencies. The overall accuracy of the empirical methods are slightly improved by annealing the CHARMM structure with ProCS15, which may suggest that the minor structural changes introduced by ProCS15-based annealing improves the accuracy of the protein structures. Having established that QM-based chemical shift prediction can deliver the same accuracy as empirical shift predictors we hope this can help increase the accuracy of related approaches such as QM/MM or linear scaling approaches or interpreting protein structural dynamics from QM-derived chemical shift. PMID:28451325

Separation of pedogenic and lithogenic components of magnetic susceptibility in the Chinese loess/palaeosol sequence as determined by the CBD procedure and a mixing analysis

NASA Astrophysics Data System (ADS)

Vidic, Nataša. J.; TenPas, Jeff D.; Verosub, Kenneth L.; Singer, Michael J.

2000-08-01

Magnetic susceptibility variations in the Chinese loess/palaeosol sequences have been used extensively for palaeoclimatic interpretations. The magnetic signal of these sequences must be divided into lithogenic and pedogenic components because the palaeoclimatic record is primarily reflected in the pedogenic component. In this paper we compare two methods for separating the pedogenic and lithogenic components of the magnetic susceptibility signal: the citrate-bicarbonate-dithionite (CBD) extraction procedure, and a mixing analysis. Both methods yield good estimates of the pedogenic component, especially for the palaeosols. The CBD procedure underestimates the lithogenic component and overestimates the pedogenic component. The magnitude of this effect is moderately high in loess layers but almost negligible in palaeosols. The mixing model overestimates the lithogenic component and underestimates the pedogenic component. Both methods can be adjusted to yield better estimates of both components. The lithogenic susceptibility, as determined by either method, suggests that palaeoclimatic interpretations based only on total susceptibility will be in error and that a single estimate of the average lithogenic susceptibility is not an accurate basis for adjusting the total susceptibility. A long-term decline in lithogenic susceptibility with depth in the section suggests more intense or prolonged periods of weathering associated with the formation of the older palaeosols. The CBD procedure provides the most comprehensive information on the magnitude of the components and magnetic mineralogy of loess and palaeosols. However, the mixing analysis provides a sensitive, rapid, and easily applied alternative to the CBD procedure. A combination of the two approaches provides the most powerful and perhaps the most accurate way of separating the magnetic susceptibility components.

Behavior of some singly ionized, heavy-ion impurities during compression in a theta-pinch plasma

NASA Technical Reports Server (NTRS)

Jalufka, N. W.

1975-01-01

The introduction of a small percentage of an impurity gas containing a desired element into a theta-pinch plasma is a standard procedure used to investigate the spectra and atomic processes of the element. This procedure assumes that the mixing ratio of impurity-to-fill gases remains constant during the collapse and heating phase. Spectroscopic investigations of the constant-mixing-ratio assumption for a 2% neon and argon impurity verifies the assumption only for the neon impurity. However, for the 2% argon impurity, only 20 to 25% of the argon is in the high-temperature compressed plasma. It is concluded that the constant-mixing-ratio assumption is not applicable to the argon impurity.

Fuel Injector Design Optimization for an Annular Scramjet Geometry

NASA Technical Reports Server (NTRS)

Steffen, Christopher J., Jr.

2003-01-01

A four-parameter, three-level, central composite experiment design has been used to optimize the configuration of an annular scramjet injector geometry using computational fluid dynamics. The computational fluid dynamic solutions played the role of computer experiments, and response surface methodology was used to capture the simulation results for mixing efficiency and total pressure recovery within the scramjet flowpath. An optimization procedure, based upon the response surface results of mixing efficiency, was used to compare the optimal design configuration against the target efficiency value of 92.5%. The results of three different optimization procedures are presented and all point to the need to look outside the current design space for different injector geometries that can meet or exceed the stated mixing efficiency target.

Evaluation of soil modification mixing procedures

DOT National Transportation Integrated Search

2001-01-01

Lime is routinely used as a soil modification agent in Kansas to improve the performance of subgrade soils with the primary goal of reducing volume change. Effective mixing of lime and soil is critical to ensuring that the expected improvements occur...

Virginia method for the design of dense-graded emulsion mixes.

DOT National Transportation Integrated Search

1982-01-01

An investigation into the Illinois method for the design of dense-graded emulsion base mixes had resulted in a report offering several modifications to that procedure. The Bituminous Research Advisory Committee then recommended that the Illinois meth...

Variation in nutrients formulated and nutrients supplied on 5 California dairies.

PubMed

Rossow, H A; Aly, S S

2013-01-01

Computer models used in ration formulation assume that nutrients supplied by a ration formulation are the same as the nutrients presented in front of the cow in the final ration. Deviations in nutrients due to feed management effects such as dry matter changes (i.e., rain), loading, mixing, and delivery errors are assumed to not affect delivery of nutrients to the cow and her resulting milk production. To estimate how feed management affects nutrients supplied to the cow and milk production, and determine if nutrients can serve as indexes of feed management practices, weekly total mixed ration samples were collected and analyzed for 4 pens (close-up cows, fresh cows, high-milk-producing, and low-milk-producing cows, if available) for 7 to 12 wk on 5 commercial California dairies. Differences among nutrient analyses from these samples and nutrients from the formulated rations were analyzed by PROC MIXED of SAS (SAS Institute Inc., Cary, NC). Milk fat and milk protein percentages did not vary as much [coefficient of variation (CV) = 18 to 33%] as milk yield (kg; CV = 16 to 47 %) across all dairies and pens. Variability in nutrients delivered were highest for macronutrient fat (CV = 22%), lignin (CV = 15%), and ash (CV = 11%) percentages and micronutrients Fe (mg/kg; CV = 48%), Na (%; CV = 42%), and Zn (mg/kg; CV = 38%) for the milking pens across all dairies. Partitioning of the variability in random effects of nutrients delivered and intraclass correlation coefficients showed that variability in lignin percentage of TMR had the highest correlation with variability in milk yield and milk fat percentage, followed by fat and crude protein percentages. But, variability in ash, fat, and lignin percentages of total mixed ration had the highest correlation with variability in milk protein percentage. Therefore, lignin, fat, and ash may be the best indices of feed management to include effects of variability in nutrients on variability in milk yield, milk fat, and milk protein percentages in ration formulation models. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Mixed time integration methods for transient thermal analysis of structures, appendix 5

NASA Technical Reports Server (NTRS)

Liu, W. K.

1982-01-01

Mixed time integration methods for transient thermal analysis of structures are studied. An efficient solution procedure for predicting the thermal behavior of aerospace vehicle structures was developed. A 2D finite element computer program incorporating these methodologies is being implemented. The performance of these mixed time finite element algorithms can then be evaluated employing the proposed example problem.

The Influence of Elective Surgery on Functional Health in Veterans with PTSD

DTIC Science & Technology

2012-12-21

elective surgery in veterans with PTSD. Design : A longitudinal, mixed method, quasi-experimental, nonequivalent control group study was conducted...longitudinal, mixed method, quasi-experimental, nonequivalent control group study was conducted. Methods and Sample: Physical and mental health...Methods Procedures." In Research design : qualitative, quantitative , and mixed methods approaches, 203-226. Thousand Oaks, Calif.: Sage Publications

Performance of fast-setting impression materials in the reproduction of subgingival tooth surfaces without soft tissue retraction.

PubMed

Rudolph, Heike; Röhl, Andreas; Walter, Michael H; Luthardt, Ralph G; Quaas, Sebastian

2014-01-01

Fast-setting impression materials may be prone to inaccuracies due to accidental divergence from the recommended mixing protocol. This prospective randomized clinical trial aimed to assess three-dimensional (3D) deviations in the reproduction of subgingival tooth surfaces and to determine the effect of either following or purposely diverging from the recommended mixing procedure for a fast-setting addition-curing silicone (AS) and fast-setting polyether (PE). After three impressions each were taken from 96 participants, sawcut gypsum casts were fabricated with a standardized procedure and then optically digitized. Data were assessed with a computer-aided 3D analysis. For AS impressions, multivariate analysis of variance revealed a significant influence of the individual tooth and the degree to which the recommended mixing protocol was violated. For PE impressions, the ambient air temperature and individual tooth showed significant effects, while divergence from the recommended mixing protocol was not of significance. The fast-setting PE material was not affected by changes in the recommended mixing protocol. For the two fast-setting materials examined, no divergences from the recommended mixing protocol of less than 2 minutes led to failures in the reproduction of the subgingival tooth surfaces.

40 CFR 60.93 - Test methods and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Test methods and procedures. 60.93... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Hot Mix Asphalt Facilities § 60.93 Test methods and procedures. (a) In conducting the performance tests required in § 60.8...

Development of laboratory mix design procedures for RAP mixes.

DOT National Transportation Integrated Search

2013-12-01

The objective of this study was to evaluate the amount of blending that occurs between RAP and virgin asphalt : binders in plant produced HMA in which RAP is incorporated. This objective was accomplished by testing plant : produced mixture from three...

Investigation of asphalt content design for open-graded bituminous mixes.

DOT National Transportation Integrated Search

1974-01-01

Several design procedures associated with determining the proper asphalt content for open-graded bituminous mixes were investigated. Also considered was the proper amount of tack coat that should be placed on the old surface prior to paving operation...

Alternative acceptance procedures for asphalt mixes.

DOT National Transportation Integrated Search

1992-01-01

By the year 2005, the use of chlorinated solvents is to be eliminated. Faced with this eventuality, VDOT formed a task force to look at alternatives for the acceptance of asphalt mixes. One alternative is to use biodegradable solvents in the extracti...

29 CFR 1926.1086 - Mixed-gas diving.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Diving Specific Operations Procedures § 1926.1086 Mixed-gas diving. Note: The requirements applicable to construction work under this section are...

A GUIDE TO AERATION/CIRCULATION TECHNIQUES FOR ...

EPA Pesticide Factsheets

The application of aeration/circulation techniques to lakes are reviewed from a theoretical and practical viewpoint. The effect of destratification on algal production is related to the mixed depth with the use of a mathematical model. Procedures are given to determine air required to mix lakes of different sizes and shapes. It was found that approximately 30 scfm of air per 1,000,000 sq ft of lake surface area can be used. Hypolimnetic aeration systems that have been used are described in detail. Procedures for design are given.

Spitzer Telemetry Processing System

NASA Technical Reports Server (NTRS)

Stanboli, Alice; Martinez, Elmain M.; McAuley, James M.

2013-01-01

The Spitzer Telemetry Processing System (SirtfTlmProc) was designed to address objectives of JPL's Multi-mission Image Processing Lab (MIPL) in processing spacecraft telemetry and distributing the resulting data to the science community. To minimize costs and maximize operability, the software design focused on automated error recovery, performance, and information management. The system processes telemetry from the Spitzer spacecraft and delivers Level 0 products to the Spitzer Science Center. SirtfTlmProc is a unique system with automated error notification and recovery, with a real-time continuous service that can go quiescent after periods of inactivity. The software can process 2 GB of telemetry and deliver Level 0 science products to the end user in four hours. It provides analysis tools so the operator can manage the system and troubleshoot problems. It automates telemetry processing in order to reduce staffing costs.

Fixed point theorems for generalized contractions in ordered metric spaces

NASA Astrophysics Data System (ADS)

O'Regan, Donal; Petrusel, Adrian

2008-05-01

The purpose of this paper is to present some fixed point results for self-generalized contractions in ordered metric spaces. Our results generalize and extend some recent results of A.C.M. Ran, M.C. Reurings [A.C.M. Ran, MEC. Reurings, A fixed point theorem in partially ordered sets and some applications to matrix equations, Proc. Amer. Math. Soc. 132 (2004) 1435-1443], J.J. Nieto, R. Rodríguez-López [J.J. Nieto, R. Rodríguez-López, Contractive mapping theorems in partially ordered sets and applications to ordinary differential equations, Order 22 (2005) 223-239; J.J. Nieto, R. Rodríguez-López, Existence and uniqueness of fixed points in partially ordered sets and applications to ordinary differential equations, Acta Math. Sin. (Engl. Ser.) 23 (2007) 2205-2212], J.J. Nieto, R.L. Pouso, R. Rodríguez-López [J.J. Nieto, R.L. Pouso, R. Rodríguez-López, Fixed point theorem theorems in ordered abstract sets, Proc. Amer. Math. Soc. 135 (2007) 2505-2517], A. Petrusel, I.A. Rus [A. Petrusel, I.A. Rus, Fixed point theorems in ordered L-spaces, Proc. Amer. Math. Soc. 134 (2006) 411-418] and R.P. Agarwal, M.A. El-Gebeily, D. O'Regan [R.P. Agarwal, M.A. El-Gebeily, D. O'Regan, Generalized contractions in partially ordered metric spaces, Appl. Anal., in press]. As applications, existence and uniqueness results for Fredholm and Volterra type integral equations are given.

The Second Great Thermal Event from the History of the Solar System as Origin of the Lunar Asymmetries and Paleomagnetism

NASA Astrophysics Data System (ADS)

Neagu, A.

1993-07-01

To explain the origin of the natural remanent magnetism (NRM) of lunar rocks [1,2] and lunar asymmetries [3-5], many models suppose an asymmetric arrangement of matter within the early Moon [6,7]. Presented here is a model of lunar evolution that explains both the appearance of the lunar asymmetries and the presence of a high lunar palaeomagnetic field in the vicinity of 3.9 Ga starting from a symmetrically differentiated Moon. According to this model, less than 0.2 Ga after its formation as a completely molten planetary body, the Moon differentiated in concentric layers to form an anorthositic crust, a mantle, and an iron core [8]. Lunar asymmetries appeared at about 3.9 Ga ago when the Sun underwent a very violent explosive phase, generating the second great thermal event (SGTE) from the history of the solar system. Solar plasma into expansion interacted with the solar system bodies, erasing previous records on a large part of their surfaces and generating thermal effects of various kinds. Figure 1 presents the manner in which the solar plasma "excavated" within the lunar crust. The result was the displacement of the lunar center-of-figure (CF) and center-of mass (CM) from O in their present positions [3-5]. A similar "excavation" within the primordial crust of the Earth generated the appearance of a protocontinental land (Proto-Pangaea). Eccentric placement of the lunar core immediately after SGTE occurrence and its movement toward the new position of the lunar CM, along with change of the lunar spin into a synchronous rotation, generated lunar internal motions vigorously enough to drive lunar dynamo. Figure 2 presents the lunar palaeomagnetic field intensity as a function of time according to this scenario. Immediately after SGTE occurrence, the lunar crust was subjected to intensive bombardment with impacting masses belonging to Population II impactors [9]. The larger impacts generated zones of weakness and fissures within the lunar crust, but the isostatic answer of the lunar interior and its asymmetric structure permitted mare volcanism to occur only on the nearside [10]. This model is strongly supported by isotopic, petrologic, and magnetic analyses of lunar nearside rocks that give abundant evidence for a widespread thermal metamorphism at about 3.9 Ga. It is reflected especially in partial to complete equilibration of the isotopic systems [8], in the redistribution of volatiles on lunar surface [11-13] and in the thermoremanent magnetization of lunar breccias [14]. This model also explains the asymmetric distribution of the thorium concentrations in the lunar surface [15] and the presence, near the lunar surface, of rocks of deep-seated origin [16]. References: [1] Nagata T. et al. (1970) Proc. Apollo 11 LSC, 2325. [2] Strangway D. W. (1971) EPSL, 13, 43. [3] Kaula W. M. et al. (1972) Proc. LSC 3rd, 2189. [4] Kaula W. M. et al. (1974) Proc. LSC 5th, 3049. [5] Haines E. L. and Metzger A. E. (1980) Proc. LPSC 11th, 689. [6] Stevenson D. J. (1980) Nature, 287, 520. [7] Ransford G. and Sjogren W. (1972) Nature, 238, 260. [8] Wasserburg G. J. et al. (1977) Phil. Trans. R. Soc. Lond., A285, 7. [9] Neagu A. (1993) 18th EGS Meeting, Wiesbaden. [10] Neagu A. (1992) Meteoritics, 27, 267. [11] Tera F. and Wasserburg G. J. (1972) EPSL, 14, 281. [12] Nunes P. D. and Tatsumoto M. (1973) Science, 182, 916. [13] Cirlin E. H. and Housley R. M. (1980) Proc. LPSC 11th, 349. [14] Gose W. A. et al. (1978) EPSL, 38, 373. [15] Metzger A. E. et al. (1977) Proc. LSC 8th, 949. [16] James O. B. (1980) Proc. LPSC 11th, 365. Fig. 1, which appears here in the hard copy, shows a schematic equatorial cross section of the Moon showing the lunar internal structure before and after SGTE occurred. Fig. 2 appears here in the hard copy.

Impact of a Child Life and Music Therapy Procedural Support Intervention on Parental Perception of Their Child's Distress During Intravenous Placement.

PubMed

Ortiz, Gabriela S; OʼConnor, Todd; Carey, Jessa; Vella, Adam; Paul, Audrey; Rode, Diane; Weinberg, Alan

2017-02-21

Child life specialists and music therapists have a unique and integral role in providing psychosocial care to pediatric patients and families. These professionals are trained to provide clinical interventions that support coping and adjustment and reduce the risk of psychological trauma related to hospital visits and health care encounters. The researchers devised a multimodal approach using a combined child life and music therapy intervention to address procedure-related distress in patients receiving intravenous (IV) placement in the pediatric emergency department. The aim of this study was to investigate the efficacy of this collaborative intervention by evaluating parental perception of their child's distress. This study was a prospective analysis investigating the impact of a child life and music therapy intervention on children aged 4 to 11 years old receiving an IV placement in the pediatric emergency department. Efficacy was evaluated by comparing scores between a 4-question pretest and subsequent 4-question posttest that asked the child's parent to evaluate how they anticipated their child would respond to the procedure, and then to evaluate how they perceived their child to have responded after the procedure. Qualitative data were collected in the form of open-ended comments, which were accommodated at the end of the posttest. Data were analyzed by the Cochran-Mantel-Haenszel method for testing repeated ordinal responses and the PROC GENMOD procedure in the SAS system software. A total of 41 participants were enrolled in this study. Results of the statistical analysis revealed significant differences between all pre- and posttest scores (P < 0.05), and significant likelihood that the patient would improve relative to the 4 questions, as a result of the child life and music therapy intervention. Improvement was demonstrated across all 4 questions, suggesting that the child life and music therapy intervention supported healthy, adaptive coping and helped to minimize distress experienced by patients during IV placement. These results underscore the importance and potential clinical impact of child life psychological preparation and psychotherapy-based music therapy interventions in reducing distress in pediatric patients during common medical procedures.

Regression analysis of mixed recurrent-event and panel-count data

PubMed Central

Zhu, Liang; Tong, Xinwei; Sun, Jianguo; Chen, Manhua; Srivastava, Deo Kumar; Leisenring, Wendy; Robison, Leslie L.

2014-01-01

In event history studies concerning recurrent events, two types of data have been extensively discussed. One is recurrent-event data (Cook and Lawless, 2007. The Analysis of Recurrent Event Data. New York: Springer), and the other is panel-count data (Zhao and others, 2010. Nonparametric inference based on panel-count data. Test 20, 1–42). In the former case, all study subjects are monitored continuously; thus, complete information is available for the underlying recurrent-event processes of interest. In the latter case, study subjects are monitored periodically; thus, only incomplete information is available for the processes of interest. In reality, however, a third type of data could occur in which some study subjects are monitored continuously, but others are monitored periodically. When this occurs, we have mixed recurrent-event and panel-count data. This paper discusses regression analysis of such mixed data and presents two estimation procedures for the problem. One is a maximum likelihood estimation procedure, and the other is an estimating equation procedure. The asymptotic properties of both resulting estimators of regression parameters are established. Also, the methods are applied to a set of mixed recurrent-event and panel-count data that arose from a Childhood Cancer Survivor Study and motivated this investigation. PMID:24648408

Smoking patterns, depression, and sociodemographic variables among Flemish women during pregnancy and the postpartum period.

PubMed

De Wilde, Katrien S; Trommelmans, Leen C; Laevens, Hans H; Maes, Lea R; Temmerman, Marleen; Boudrez, Hedwig L

2013-01-01

Relationships among feelings of depression, smoking behavior, and educational level during pregnancy have been documented. Feelings of depression may contribute to persistent smoking during pregnancy. No longitudinal studies assessing feelings of depression in women with different antepartum and postpartum smoking patterns are available. The aim was to determine relationships between depressive symptoms, sociodemographic characteristics, and smoking pattern during and after pregnancy. An observational, prospective, noninterventional study was conducted. Data were collected during two stages of pregnancy (T0: <;16 weeks and T1: 32-34 weeks) and postpartum (T2: >6 weeks) in 523 Flemish women. Feelings of depression (measured using the Beck Depression Inventory [BDI]), smoking behavior, and sociodemographic variables were analyzed using a general linear mixed model implemented in SAS Proc MIXED. Smokers and initial smokers reported significantly more depressive symptoms at all time points compared with recent ex-smokers, nonsmokers, and initial nonsmokers (p <; .001). The three-way interaction among time point, smoking pattern, and educational level was significant (p = .02). Evolution of mean BDI over time differed by educational level. Among participants with a secondary school certificate or less, differences were observed between smokers and nonsmokers, recent ex-smokers and initial nonsmokers, and nonsmokers and initial nonsmokers. Among participants with a college or university degree, no differences were observed. A wide variety of smoking patterns were observed during pregnancy and early postpartum. Smoking patterns were associated with depression and showed complex interactions with educational level. Assessment and intervention for both smoking and depression are needed throughout the perinatal period to support the health of mothers, their infants, and families.

X-ray continuum as a measure of pressure and fuel–shell mix in compressed isobaric hydrogen implosion cores

DOE Office of Scientific and Technical Information (OSTI.GOV)

Epstein, R.; Goncharov, V. N.; Marshall, F. J.

Pressure, by definition, characterizes the conditions within an isobaric implosion core at peak compression [Gus'kov et al., Nucl. Fusion 16, 957 (1976); Betti et al., Phys. Plasmas 8, 5257 (2001)] and is a key parameter in quantifying its near-ignition performance [Lawson, Proc. Phys. Soc. London, B 70, 6 (1957); Betti et al., Phys. Plasmas 17, 058102 (2010); Goncharov et al., Phys. Plasmas 21, 056315 (2014); and Glenzer et al., Phys. Plasmas 19, 056318 (2012)]. At high spectral energy, where the x-ray emission from an imploded hydrogen core is optically thin, the emissivity profile can be inferred from the spatially resolvedmore » core emission. This emissivity, which can be modeled accurately under hot-core conditions, is dependent almost entirely on the pressure when measured within a restricted spectral range matched to the temperature range anticipated for the emitting volume. In this way, the hot core pressure at the time of peak emission can be inferred from the measured free-free emissivity profile. The pressure and temperature dependences of the x-ray emissivity and the neutron-production rate explain a simple scaling of the total filtered x-ray emission as a constant power of the total neutron yield for implosions of targets of similar design over a broad range of shell implosion isentropes. This scaling behavior has been seen in implosion simulations and is confirmed by measurements of high-isentrope implosions [Sangster et al., Phys. Plasmas 20, 056317 (2013)] on the OMEGA laser system [Boehly et al., Opt. Commun. 133, 495 (1997)]. Attributing the excess emission from less-stable, low-isentrope implosions, above the level expected from this neutron-yield scaling, to the higher emissivity of shell carbon mixed into the implosion's central hot spot, the hot-spot “fuel–shell” mix mass can be inferred.« less

X-ray continuum as a measure of pressure and fuel–shell mix in compressed isobaric hydrogen implosion cores

DOE Office of Scientific and Technical Information (OSTI.GOV)

Epstein, R.; Goncharov, V. N.; Marshall, F. J.

Pressure, by definition, characterizes the conditions within an isobaric implosion core at peak compression [Gus’kov et al., Nucl. Fusion 16, 957 (1976); Betti et al., Phys. Plasmas 8, 5257 (2001)] and is a key parameter in quantifying its near-ignition performance [Lawson, Proc. Phys. Soc. London, B 70, 6 (1957); Betti et al., Phys. Plasmas 17, 058102 (2010); Goncharov et al., Phys. Plasmas 21, 056315 (2014); and Glenzer et al., Phys. Plasmas 19, 056318 (2012)]. At high spectral energy, where the x-ray emission from an imploded hydrogen core is optically thin, the emissivity profile can be inferred from the spatially resolvedmore » core emission. This emissivity, which can be modeled accurately under hot-core conditions, is dependent almost entirely on the pressure when measured within a restricted spectral range matched to the temperature range anticipated for the emitting volume. In this way, the hot core pressure at the time of peak emission can be inferred from the measured free-free emissivity profile. The pressure and temperature dependences of the x-ray emissivity and the neutron-production rate explain a simple scaling of the total filtered x-ray emission as a constant power of the total neutron yield for implosions of targets of similar design over a broad range of shell implosion isentropes. This scaling behavior has been seen in implosion simulations and is confirmed by measurements of high-isentrope implosions [Sangster et al., Phys. Plasmas 20, 056317 (2013)] on the OMEGA laser system [Boehly et al., Opt. Commun. 133, 495 (1997)]. Attributing the excess emission from less-stable, low-isentrope implosions, above the level expected from this neutron-yield scaling, to the higher emissivity of shell carbon mixed into the implosion’s central hot spot, the hot-spot “fuel–shell” mix mass can be inferred.« less

APT-ALF testing at LTRC in Louisiana : summary report.

DOT National Transportation Integrated Search

2012-09-01

As an integral part of Study 0-6132, the primary objectives of this task included the following: : 1) To validate the new generation mix-design procedure (balanced) under APT testing using the ALF machine. : 2) To compare the HMA mix performance desi...

Testing and Evaluation of Large Stone Mixes Using Marshall Mix Design Procedures

DOT National Transportation Integrated Search

1989-11-01

Premature rutting of heavy duty asphalt pavements has been increasingly experienced in recent years primarily due to high pressure truck tires and increased wheel loads. Many asphalt technologists believe that the use of large size stone (maximum siz...

Development and application of a statistical quality assessment method for dense-graded mixes.

DOT National Transportation Integrated Search

2004-08-01

This report describes the development of the statistical quality assessment method and the procedure for mapping the measures obtained from the quality assessment method to a composite pay factor. The application to dense-graded mixes is demonstrated...

40 CFR 63.9520 - What procedures must I use to demonstrate initial compliance?

Code of Federal Regulations, 2010 CFR

2010-07-01

... the emission limitations in § 63.9500(a) and (b). (1) Record the date and time of each mix batch. (2) Record the identity of each mix batch using a unique batch ID, as defined in § 63.9565. (3) Measure and record the weight of HAP solvent loaded into the solvent mixer for each mix batch. (4) Measure and record...

An equivalent domain integral for analysis of two-dimensional mixed mode problems

NASA Technical Reports Server (NTRS)

Raju, I. S.; Shivakumar, K. N.

1989-01-01

An equivalent domain integral (EDI) method for calculating J-integrals for two-dimensional cracked elastic bodies subjected to mixed mode loading is presented. The total and product integrals consist of the sum of an area or domain integral and line integrals on the crack faces. The EDI method gave accurate values of the J-integrals for two mode I and two mixed mode problems. Numerical studies showed that domains consisting of one layer of elements are sufficient to obtain accurate J-integral values. Two procedures for separating the individual modes from the domain integrals are presented. The procedure that uses the symmetric and antisymmetric components of the stress and displacement fields to calculate the individual modes gave accurate values of the integrals for all the problems analyzed.

Basic Aspects of Deep Soil Mixing Technology Control

NASA Astrophysics Data System (ADS)

Egorova, Alexandra A.; Rybak, Jarosław; Stefaniuk, Damian; Zajączkowski, Przemysław

2017-10-01

Improving a soil is a process of increasing its physical/mechanical properties without changing its natural structure. Improvement of soil subbase is reached by means of the knitted materials, or other methods when strong connection between soil particles is established. The method of DSM (Deep Soil Mixing) columns has been invented in Japan in 1970s. The main reason of designing cement-soil columns is to improve properties of local soils (such as strength and stiffness) by mixing them with various cementing materials. Cement and calcium are the most commonly used binders. However new research undertaken worldwide proves that apart from these materials, also gypsum or fly ashes can also be successfully implemented. As the Deep Soil Mixing is still being under development, anticipating mechanical properties of columns in particular soils and the usage of cementing materials in formed columns is very difficult and often inappropriate to predict. That is why a research is carried out in order to find out what binders and mixing technology should be used. The paper presents several remarks on the testing procedures related to quality and capacity control of Deep Soil Mixing columns. Soil improvement methods, their advantages and limitations are briefly described. The authors analyse the suitability of selected testing methods on subsequent stages of design and execution of special foundations works. Chosen examples from engineering practice form the basis for recommendations for the control procedures. Presented case studies concerning testing the on capacity field samples and laboratory procedures on various categories of soil-cement samples were picked from R&D and consulting works offered by Wroclaw University of Science and Technology. Special emphasis is paid to climate conditions which may affect the availability of performing and controlling of DSM techniques in polar zones, with a special regard to sample curing.

Development of improved pavement rehabilitation procedures based on FWD backcalculation.

DOT National Transportation Integrated Search

2015-01-01

Hot Mix Asphalt (HMA) overlays are among the most effective maintenance and rehabilitation : alternatives in improving the structural as well as functional performance of flexible pavements. HMA : overlay design procedures can be based on: (1) engine...

Including mixed methods research in systematic reviews: examples from qualitative syntheses in TB and malaria control.

PubMed

Atkins, Salla; Launiala, Annika; Kagaha, Alexander; Smith, Helen

2012-04-30

Health policy makers now have access to a greater number and variety of systematic reviews to inform different stages in the policy making process, including reviews of qualitative research. The inclusion of mixed methods studies in systematic reviews is increasing, but these studies pose particular challenges to methods of review. This article examines the quality of the reporting of mixed methods and qualitative-only studies. We used two completed systematic reviews to generate a sample of qualitative studies and mixed method studies in order to make an assessment of how the quality of reporting and rigor of qualitative-only studies compares with that of mixed-methods studies. Overall, the reporting of qualitative studies in our sample was consistently better when compared with the reporting of mixed methods studies. We found that mixed methods studies are less likely to provide a description of the research conduct or qualitative data analysis procedures and less likely to be judged credible or provide rich data and thick description compared with standalone qualitative studies. Our time-related analysis shows that for both types of study, papers published since 2003 are more likely to report on the study context, describe analysis procedures, and be judged credible and provide rich data. However, the reporting of other aspects of research conduct (i.e. descriptions of the research question, the sampling strategy, and data collection methods) in mixed methods studies does not appear to have improved over time. Mixed methods research makes an important contribution to health research in general, and could make a more substantial contribution to systematic reviews. Through our careful analysis of the quality of reporting of mixed methods and qualitative-only research, we have identified areas that deserve more attention in the conduct and reporting of mixed methods research.

Computer program for calculating the flow field of supersonic ejector nozzles

NASA Technical Reports Server (NTRS)

Anderson, B. H.

1974-01-01

An analytical procedure for computing the performance of supersonic ejector nozzles is presented. This procedure includes real sonic line effects and an interaction analysis for the mixing process between the two streams. The procedure is programmed in FORTRAN 4 and has operated successfully on IBM 7094, IBM 360, CDC 6600, and Univac 1108.

40 CFR Appendix E to Part 63 - Monitoring Procedure for Nonthoroughly Mixed Open Biological Treatment Systems at Kraft Pulp...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Systems at Kraft Pulp Mills Under Unsafe Sampling Conditions I. Purpose This procedure is required to be... conditions. The purpose of this procedure is to estimate the concentration of HAP within the open biological... zones with internal recycling between the units and assuming that two Monod biological kinetic...

Effect of various pretreatment methods on anaerobic mixed microflora to enhance biohydrogen production utilizing dairy wastewater as substrate.

PubMed

Venkata Mohan, S; Lalit Babu, V; Sarma, P N

2008-01-01

Influence of different pretreatment methods applied on anaerobic mixed inoculum was evaluated for selectively enriching the hydrogen (H(2)) producing mixed culture using dairy wastewater as substrate. The experimental data showed the feasibility of molecular biohydrogen generation utilizing dairy wastewater as primary carbon source through metabolic participation. However, the efficiency of H(2) evolution and substrate removal efficiency were found to be dependent on the type of pretreatment procedure adopted on the parent inoculum. Among the studied pretreatment methods, chemical pretreatment (2-bromoethane sulphonic acid sodium salt (0.2 g/l); 24 h) procedure enabled higher H(2) yield along with concurrent substrate removal efficiency. On the contrary, heat-shock pretreatment (100 degrees C; 1 h) procedure resulted in relatively low H(2) yield. Compared to control experiments all the adopted pretreatment methods documented higher H(2) generation efficiency. In the case of combination experiments, integration of pH (pH 3; adjusted with ortho-phosphoric acid; 24 h) and chemical pretreatment evidenced higher H(2) production. Data envelopment analysis (DEA), a frontier analysis technique model was successfully applied to enumerate the relative efficiency of different pretreatment methods studied by considered pretreatment procedures as input and cumulative H(2) production rate and substrate degradation rate as corresponding two outputs.

Kentucky highway user survey 2004.

DOT National Transportation Integrated Search

2004-06-01

The purpose of this study was to continue the efforts begun in 1997 to monitor Kentucky public opinion regarding the quality of highway systems, including a portion to measure satisfaction with current drivers license and registration renewal proc...

Kentucky highway user survey 2001.

DOT National Transportation Integrated Search

2002-04-01

The purpose of this study was to continue the efforts begun in 1997 to monitor Kentucky public opinion regarding the quality of highway systems, including a portion to measure satisfaction with current drivers license and registration renewal proc...

EVALUATING THE SUSTAINABILITY OF GREEN CHEMISTRIES

EPA Science Inventory

The U.S. EPA's National Risk Management Research Laboratory is developing a methodology for the evaluation of reaction chemistries. This methodology, called GREENSCOPE (Gauging Reaction Effectiveness for the ENvironmental Sustainability of Chemistries with a multi-Objective Proc...

Bioanalytical Methods for Food Contaminant Analysis

EPA Science Inventory

Foods are complex mixtures of lipids, carbohydrates, proteins, vitamins, organic compounds and other naturally occurring compounds. Sometimes added to this mixture are residues of pesticides, veterinary and human drugs, microbial toxins, preservatives, contaminants from food proc...

76 FR 55070 - Government-Owned Inventions; Availability for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-06

...). Publications: 1. Robbins JB, et al. Synthesis, characterization, and immunogenicity in mice of Shigella sonnei O-specific oligosaccharide- core-protein conjugates. Proc Natl Acad Sci U S A. 2009 May 12;106(19...

Hot recycling of asphaltic concrete pavement : IR-15-3(8)121, Wildcat to Pine Creek

DOT National Transportation Integrated Search

1981-02-01

There are various methods of pavement material recycling. This report is devoted to hot-mix plant recycling considerations and procedures. The several phases of the hot-mix recycling process are discussed separately, including removal and size reduct...

Development of mix design procedures for gap-graded asphalt-rubber asphalt concrete

DOT National Transportation Integrated Search

2007-11-01

A research project was conducted to identify and document current modifications to ARIZONA 815c (75-blow Marshall method) used to develop gap-graded asphalt rubber asphalt concrete (GG AR AC) mix designs, and to develop and test improvements to provi...

16 CFR 1209.5 - Test procedures for corrosiveness.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., combed, or otherwise mixed to reasonably assure homogeneity in the cellulose insulation test specimens... Evaluating Corrosion Test Specimens,” published by American Society for Testing and Materials, 1916 Race... acid (plus water). To avoid injury in this and subsequent techniques when mixing acid and water...

24 CFR 7.36 - Hearing.

Code of Federal Regulations, 2011 CFR

2011-04-01

... EMPLOYMENT OPPORTUNITY; POLICY, PROCEDURES AND PROGRAMS Equal Employment Opportunity Without Regard to Race... and the time frames for executing the right to request an administrative hearing. Note: Where a mixed... unless the MSPB has dismissed the mixed case complaint or appeal for jurisdictional reasons. (See 29 CFR...

24 CFR 7.36 - Hearing.

Code of Federal Regulations, 2010 CFR

2010-04-01

... EMPLOYMENT OPPORTUNITY; POLICY, PROCEDURES AND PROGRAMS Equal Employment Opportunity Without Regard to Race... and the time frames for executing the right to request an administrative hearing. Note: Where a mixed... unless the MSPB has dismissed the mixed case complaint or appeal for jurisdictional reasons. (See 29 CFR...

Application of FTA technology to extraction of sperm DNA from mixed body fluids containing semen.

PubMed

Fujita, Yoshihiko; Kubo, Shin-ichi

2006-01-01

FTA technology is a novel method designed to simplify the collection, shipment, archiving and purification of nucleic acids from a wide variety of biological sources. In this study, we report a rapid and simple method of extracting DNA from sperm when body fluids mixed with semen were collected using FTA cards. After proteinase K digestion of the sperm and body fluid mixture, the washed pellet suspension as the sperm fraction and the concentrated supernatant as the epithelial cell fraction were respectively applied to FTA cards containing DTT. The FTA cards were dried, then directly added to a polymerase chain reaction (PCR) mix and processed by PCR. The time required from separation of the mixed fluid into sperm and epithelial origin DNA extractions was only about 2.5-3h. Furthermore, the procedure was extremely simple. It is considered that our designed DNA extraction procedure using an FTA card is available for application to routine work.

Excimer laser correction of hyperopia, hyperopic and mixed astigmatism: past, present, and future.

PubMed

Lukenda, Adrian; Martinović, Zeljka Karaman; Kalauz, Miro

2012-06-01

The broad acceptance of "spot scanning" or "flying spot" excimer lasers in the last decade has enabled the domination of corneal ablative laser surgery over other refractive surgical procedures for the correction of hyperopia, hyperopic and mixed astigmatism. This review outlines the most important reasons why the ablative laser correction of hyperopia, hyperopic and mixed astigmatism for many years lagged behind that of myopia. Most of today's scanning laser systems, used in the LASIK and PRK procedures, can safely and effectively perform low, moderate and high hyperopic and hyperopic astigmatic corrections. The introduction of these laser platforms has also significantly improved the long term refractive stability of hyperopic treatments. In the future, further improvements in femtosecond and nanosecond technology, eye-tracker systems, and the development of new customized algorithms, such as the ray-tracing method, could additionally increase the upper limit for the safe and predictable corneal ablative laser correction ofhyperopia, hyperopic and mixed astigmatism.

Inertia in strategy switching transforms the strategy evolution.

PubMed

Zhang, Yanling; Fu, Feng; Wu, Te; Xie, Guangming; Wang, Long

2011-12-01

A recent experimental study [Traulsen et al., Proc. Natl. Acad. Sci. 107, 2962 (2010)] shows that human strategy updating involves both direct payoff comparison and the cost of switching strategy, which is equivalent to inertia. However, it remains largely unclear how such a predisposed inertia affects 2 × 2 games in a well-mixed population of finite size. To address this issue, the "inertia bonus" (strategy switching cost) is added to the learner payoff in the Fermi process. We find how inertia quantitatively shapes the stationary distribution and that stochastic stability under inertia exhibits three regimes, with each covering seven regions in the plane spanned by two inertia parameters. We also obtain the extended "1/3" rule with inertia and the speed criterion with inertia; these two findings hold for a population above two. We illustrate the above results in the framework of the Prisoner's Dilemma game. As inertia varies, two intriguing stationary distributions emerge: the probability of coexistence state is maximized, or those of two full states are simultaneously peaked. Our results may provide useful insights into how the inertia of changing status quo acts on the strategy evolution and, in particular, the evolution of cooperation.

Visualizing deceleration-phase instabilities in inertial confinement fusion implosions using an "enhanced self-emission" technique at the National Ignition Facility

NASA Astrophysics Data System (ADS)

Pickworth, L. A.; Hammel, B. A.; Smalyuk, V. A.; Robey, H. F.; Benedetti, L. R.; Berzak Hopkins, L.; Bradley, D. K.; Field, J. E.; Haan, S. W.; Hatarik, R.; Hartouni, E.; Izumi, N.; Johnson, S.; Khan, S.; Lahmann, B.; Landen, O. L.; Le Pape, S.; MacPhee, A. G.; Meezan, N. B.; Milovich, J.; Nagel, S. R.; Nikroo, A.; Pak, A. E.; Petrasso, R.; Remington, B. A.; Rice, N. G.; Springer, P. T.; Stadermann, M.; Widmann, K.; Hsing, W.

2018-05-01

High-mode perturbations and low-mode asymmetries were measured in the deceleration phase of indirectly driven, deuterium gas filled inertial confinement fusion capsule implosions at convergence ratios of 10 to 15, using a new "enhanced emission" technique at the National Ignition Facility [E. M. Campbell et al., AIP Conf. Proc. 429, 3 (1998)]. In these experiments, a high spatial resolution Kirkpatrick-Baez microscope was used to image the x-ray emission from the inner surface of a high-density-carbon capsule's shell. The use of a high atomic number dopant in the shell enabled time-resolved observations of shell perturbations penetrating into the hot spot. This allowed the effects of the perturbations and asymmetries on degrading neutron yield to be directly measured. In particular, mix induced radiation losses of ˜400 J from the hot spot resulted in a neutron yield reduction of a factor of ˜2. In a subsequent experiment with a significantly increased level of short-mode initial perturbations, shown through the enhanced imaging technique to be highly organized radially, the neutron yield dropped an additional factor of ˜2.

Field samples of hot mix as an acceptance procedure : final report.

DOT National Transportation Integrated Search

1983-12-01

Shifting the sampling site of asphalt concrete from the plant to the roadway necessitates a modification of the Marshall procedure. The effect of such as modification on the Marshall properties and resultant process levels in a Satistically Oriented ...

[Surgical treatment for morbid obesity].

PubMed

Pablo-Pantoja, Juan

2004-01-01

Obesity has become a serious public health problem in Mexico and at present time and the best treatment for morbid obesity is surgery. Recently, laparoscopic techniques have become available for treatment of this disease. Surgery is indicated in patients with body mass index (BMI) >35 kg/m2, and with comorbidity. Restrictive procedures such as adjustable gastric banding and vertical banded gastroplasty have less incidence of postoperative complications; however efficacy in terms of weight loss is not as good as in malabsorptive or mixed procedures. Patients who undergo these malabsorptive or mixed procedures (gastric bypass, biliopancreatic diversion) are at higher risk for postoperative complication. To date, gastric bypass is considered the care standard for treatment of morbid obesity; it confers an approximately 70% of body-weight-loss excess, with an acceptable rate of complications.

An investigation of the uniform random number generator

NASA Technical Reports Server (NTRS)

Temple, E. C.

1982-01-01

Most random number generators that are in use today are of the congruential form X(i+1) + AX(i) + C mod M where A, C, and M are nonnegative integers. If C=O, the generator is called the multiplicative type and those for which C/O are called mixed congruential generators. It is easy to see that congruential generators will repeat a sequence of numbers after a maximum of M values have been generated. The number of numbers that a procedure generates before restarting the sequence is called the length or the period of the generator. Generally, it is desirable to make the period as long as possible. A detailed discussion of congruential generators is given. Also, several promising procedures that differ from the multiplicative and mixed procedure are discussed.

Laboratory performance evaluation of CIR-emulsion and its comparison against CIR-foam test results from phase III.

DOT National Transportation Integrated Search

2009-12-01

Currently, no standard mix design procedure is available for CIR-emulsion in Iowa. The CIR-foam mix : design process developed during the previous phase is applied for CIR-emulsion mixtures with varying : emulsified asphalt contents. Dynamic modulus ...

The Complexities of Teachers' Commitment to Environmental Education: A Mixed Methods Approach

ERIC Educational Resources Information Center

Sosu, Edward M.; McWilliam, Angus; Gray, Donald S.

2008-01-01

This article argues that a mixed methods approach is useful in understanding the complexity that underlies teachers' commitment to environmental education. Using sequential and concurrent procedures, the authors demonstrate how different methodological approaches highlighted different aspects of teacher commitment. The quantitative survey examined…

I-15 San Diego, California, model validation and calibration report.

DOT National Transportation Integrated Search

2010-02-01

The Integrated Corridor Management (ICM) initiative requires the calibration and validation of simulation models used in the Analysis, Modeling, and Simulation of Pioneer Site proposed integrated corridors. This report summarizes the results and proc...

Optimization-based methods for road image registration

DOT National Transportation Integrated Search

2008-02-01

A number of transportation agencies are now relying on direct imaging for monitoring and cataloguing the state of their roadway systems. Images provide objective information to characterize the pavement as well as roadside hardware. The tasks of proc...

Boolean networks with veto functions

NASA Astrophysics Data System (ADS)

Ebadi, Haleh; Klemm, Konstantin

2014-08-01

Boolean networks are discrete dynamical systems for modeling regulation and signaling in living cells. We investigate a particular class of Boolean functions with inhibiting inputs exerting a veto (forced zero) on the output. We give analytical expressions for the sensitivity of these functions and provide evidence for their role in natural systems. In an intracellular signal transduction network [Helikar et al., Proc. Natl. Acad. Sci. USA 105, 1913 (2008), 10.1073/pnas.0705088105], the functions with veto are over-represented by a factor exceeding the over-representation of threshold functions and canalyzing functions in the same system. In Boolean networks for control of the yeast cell cycle [Li et al., Proc. Natl. Acad. Sci. USA 101, 4781 (2004), 10.1073/pnas.0305937101; Davidich et al., PLoS ONE 3, e1672 (2008), 10.1371/journal.pone.0001672], no or minimal changes to the wiring diagrams are necessary to formulate their dynamics in terms of the veto functions introduced here.

Electron Gun and Collector Design for 94 GHz Gyro-amplifiers.

NASA Astrophysics Data System (ADS)

Nguyen, K.; Danly, B.; Levush, B.; Blank, M.; True, D.; Felch, K.; Borchard, P.

1997-05-01

The electrical design of the magnetron injection gun and collector for high average power TE_01 gyro-amplifiers has recently been completed using the EGUN(W.B. Herrmannsfeldt, AIP Conf. Proc. 177, pp. 45-58, 1988.) and DEMEOS(R. True, AIP Conf. Proc. 297, pp. 493-499, 1993.) codes. The gun employs an optimized double-anode geometry and a radical cathode cone angle of 500 to achieve superior beam optics that are relatively insensitive to electrode misalignments and field errors. Perpendicular velocity spread of 1.6% at an perpendicular to axial velocity ratio of 1.52 is obtained for a 6 A, 65 kV beam. The 1.28" diameter collector, which also serves as the output waveguide, has an average power density of < 350 W/cm^2 for a 59 kW average power beam. Details will be presented at the conference.

High-Power Testing of 11.424-GHz Dielectric-Loaded Accelerating Structures

NASA Astrophysics Data System (ADS)

Gold, Steven; Gai, Wei

2001-10-01

Argonne National Laboratory has previously described the design, construction, and bench testing of an X-band traveling-wave accelerating structure loaded with a permittivity=20 dielectric (P. Zou et al., Rev. Sci. Instrum. 71, 2301, 2000.). We describe a new program to build a test accelerator using this structure. The accelerator will be powered by the high-power 11.424-GHz radiation from the magnicon facility at the Naval Research Laboratory ( O.A. Nezhevenko et al., Proc. PAC 2001, in press). The magnicon is expected to provide up to 30 MW from each of two WR-90 output waveguide arms in pulses of up to 1 microsecond duration, permitting tests up to a gradient of 40 MV/m. Still higher power pulses (100-500 MW) may be available at the output of an active pulse compressor driven by the magnicon ( A.L. Vikharev et al., Proc. 9th Workshop on Advanced Accelerator Concepts.).

A lanthipeptide library used to identify a protein-protein interaction inhibitor.

PubMed

Yang, Xiao; Lennard, Katherine R; He, Chang; Walker, Mark C; Ball, Andrew T; Doigneaux, Cyrielle; Tavassoli, Ali; van der Donk, Wilfred A

2018-04-01

In this article we describe the production and screening of a genetically encoded library of 10 6 lanthipeptides in Escherichia coli using the substrate-tolerant lanthipeptide synthetase ProcM. This plasmid-encoded library was combined with a bacterial reverse two-hybrid system for the interaction of the HIV p6 protein with the UEV domain of the human TSG101 protein, which is a critical protein-protein interaction for HIV budding from infected cells. Using this approach, we identified an inhibitor of this interaction from the lanthipeptide library, whose activity was verified in vitro and in cell-based virus-like particle-budding assays. Given the variety of lanthipeptide backbone scaffolds that may be produced with ProcM, this method may be used for the generation of genetically encoded libraries of natural product-like lanthipeptides containing substantial structural diversity. Such libraries may be combined with any cell-based assay to identify lanthipeptides with new biological activities.

Mixing of thawed coagulation samples prior to testing: Is any technique better than another?

PubMed

Lima-Oliveira, Gabriel; Adcock, Dorothy M; Salvagno, Gian Luca; Favaloro, Emmanuel J; Lippi, Giuseppe

2016-12-01

Thus study was aimed to investigate whether the mixing technique could influence the results of routine and specialized clotting tests on post-thawed specimens. The sample population consisted of 13 healthy volunteers. Venous blood was collected by evacuated system into three 3.5mL tubes containing 0.109mmol/L buffered sodium citrate. The three blood tubes of each subject were pooled immediately after collection inside a Falcon 15mL tube, then mixed by 6 gentle end-over-end inversions, and centrifuged at 1500g for 15min. Plasma-pool of each subject was then divided in 4 identical aliquots. All aliquots were thawed after 2-day freezing -70°C. Immediately afterwards, the plasma of the four paired aliquots were treated using four different techniques: (a) reference procedure, entailing 6 gentle end-over-end inversions; (b) placing the sample on a blood tube rocker (i.e., rotor mixing) for 5min to induce agitation and mixing; (c) use of a vortex mixer for 20s to induce agitation and mixing; and (d) no mixing. The significance of differences against the reference technique for mixing thawed plasma specimens (i.e., 6 gentle end-over-end inversions) were assessed with paired Student's t-test. The statistical significance was set at p<0.05. As compared to the reference 6-time gentle inversion technique, statistically significant differences were only observed for fibrinogen, and factor VIII in plasma mixed on tube rocker. Some trends were observed in the remaining other cases, but the bias did not achieve statistical significance. We hence suggest that each laboratory should standardize the procedures for mixing of thawed plasma according to a single technique. Copyright © 2016 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Post Accident Procedures for Chemicals and Propellants.

DTIC Science & Technology

1982-09-01

METHODS AND PROCEDURES ............ 4-1 4.1 Overview of Emergency Response Procedures " and Resources Available .......................... 4-1 L1 TABLE...7-1 7.1 Criteria forTwelve Critical Operations ........................ 7-1 7.1.1 On-Scene Methods for Identifying the Ingredients...Establishing A Protocol for Selecting the Hazards Mitigation and Cleanup Methods for Single Material Spills and Multiple Materials Mixing

The application of mixed methods designs to trauma research.

PubMed

Creswell, John W; Zhang, Wanqing

2009-12-01

Despite the use of quantitative and qualitative data in trauma research and therapy, mixed methods studies in this field have not been analyzed to help researchers designing investigations. This discussion begins by reviewing four core characteristics of mixed methods research in the social and human sciences. Combining these characteristics, the authors focus on four select mixed methods designs that are applicable in trauma research. These designs are defined and their essential elements noted. Applying these designs to trauma research, a search was conducted to locate mixed methods trauma studies. From this search, one sample study was selected, and its characteristics of mixed methods procedures noted. Finally, drawing on other mixed methods designs available, several follow-up mixed methods studies were described for this sample study, enabling trauma researchers to view design options for applying mixed methods research in trauma investigations.

Bohm-criterion approximation versus optimal matched solution for a cylindrical probe in radial-motion theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Din, Alif

2016-08-15

The theory of positive-ion collection by a probe immersed in a low-pressure plasma was reviewed and extended by Allen et al. [Proc. Phys. Soc. 70, 297 (1957)]. The numerical computations for cylindrical and spherical probes in a sheath region were presented by F. F. Chen [J. Nucl. Energy C 7, 41 (1965)]. Here, in this paper, the sheath and presheath solutions for a cylindrical probe are matched through a numerical matching procedure to yield “matched” potential profile or “M solution.” The solution based on the Bohm criterion approach “B solution” is discussed for this particular problem. The comparison of cylindricalmore » probe characteristics obtained from the correct potential profile (M solution) and the approximated Bohm-criterion approach are different. This raises questions about the correctness of cylindrical probe theories relying only on the Bohm-criterion approach. Also the comparison between theoretical and experimental ion current characteristics shows that in an argon plasma the ions motion towards the probe is almost radial.« less

VizieR Online Data Catalog: GALAH semi-automated classification scheme (Traven+, 2017)

NASA Astrophysics Data System (ADS)

Traven, G.; Matijevic, G.; Zwitter, T.; Zerjal, M.; Kos, J.; Asplund, M.; Bland-Hawthorn, J.; Casey, A. R.; de Silva, G.; Freeman, K.; Lin, J.; Martell, S. L.; Schlesinger, K. J.; Sharma, S.; Simpson, J. D.; Zucker, D. B.; Anguiano, B.; da Costa, G.; Duong, L.; Horner, J.; Hyde, E. A.; Kafle, P. R.; Munari, U.; Nataf, D.; Navin, C. A.; Reid, W.; Ting, Y.-S.

2017-04-01

The GALactic Archaeology with HERMES (GALAH) survey was the main driver for the construction of Hermes (High Efficiency and Resolution Multi-Element Spectrograph), a fiber-fed multi-object spectrograph on the 3.9m Anglo-Australian Telescope. Its spectral resolving power (R) is about 28000, and there is also an R=45000 mode using a slit mask. Hermes has four simultaneous non-contiguous spectral arms centered at 4800, 5761, 6610, and 7740Å, covering about 1000Å in total, including Hα and Hβ lines. About 300000 spectra have been taken to date, including various calibration exposures. However, we concentrate on ~210000 spectra recorded before 2016 January 30. We devise a custom classification procedure which is based on two independently developed methods, the novel dimensionality reduction technique t-SNE (t-distributed stochastic neighbor embedding; van der Maaten & Hinton 2008, Journal of Machine Learning Research 9, 2579) and the renowned clustering algorithm DBSCAN (Ester+ 1996, Proc. 2nd Int. Conf. on KDD, 226 ed. E. Simoudis, J. Han, and U. Fayyad). (4 data files).

Further Progress Applying the Generalized Wigner Distribution to Analysis of Vicinal Surfaces

NASA Astrophysics Data System (ADS)

Einstein, T. L.; Richards, Howard L.; Cohen, S. D.

2001-03-01

Terrace width distributions (TWDs) can be well fit by the generalized Wigner distribution (GWD), generally better than by conventional Gaussians, and thus offers a convenient way to estimate the dimensionless elastic repulsion strength tildeA from σ^2, the TWD variance.(T.L. Einstein and O. Pierre-Louis, Surface Sci. 424), L299 (1999) The GWD σ^2 accurately reproduces values for the two exactly soluble cases at small tildeA and in the asymptotic limit. Taxing numerical simulations show that the GWD σ^2 interpolates well between these limits. Extensive applications have been made to experimental data, esp. on Cu.(M. Giesen and T.L. Einstein, Surface Sci. 449), 191 (2000) Recommended analysis procedures are catalogued.(H.L. Richards, S.D. Cohen, TLE, & M. Giesen, Surf Sci 453), 59 (2000) Extensions of the GWD for multistep distributions are tested, with good agreement for second-neighbor distributions, less good for third.(TLE, HLR, SDC, & OP-L, Proc ISSI-PDSC2000, cond-mat/0012xxxxx) Alternatively, step-step correlation functions, about which there is more theoretical information, should be measured.

Dynamic neutron scattering from conformational dynamics. I. Theory and Markov models

NASA Astrophysics Data System (ADS)

Lindner, Benjamin; Yi, Zheng; Prinz, Jan-Hendrik; Smith, Jeremy C.; Noé, Frank

2013-11-01

The dynamics of complex molecules can be directly probed by inelastic neutron scattering experiments. However, many of the underlying dynamical processes may exist on similar timescales, which makes it difficult to assign processes seen experimentally to specific structural rearrangements. Here, we show how Markov models can be used to connect structural changes observed in molecular dynamics simulation directly to the relaxation processes probed by scattering experiments. For this, a conformational dynamics theory of dynamical neutron and X-ray scattering is developed, following our previous approach for computing dynamical fingerprints of time-correlation functions [F. Noé, S. Doose, I. Daidone, M. Löllmann, J. Chodera, M. Sauer, and J. Smith, Proc. Natl. Acad. Sci. U.S.A. 108, 4822 (2011)]. Markov modeling is used to approximate the relaxation processes and timescales of the molecule via the eigenvectors and eigenvalues of a transition matrix between conformational substates. This procedure allows the establishment of a complete set of exponential decay functions and a full decomposition into the individual contributions, i.e., the contribution of every atom and dynamical process to each experimental relaxation process.

Estimating relative risks for common outcome using PROC NLP.

PubMed

Yu, Binbing; Wang, Zhuoqiao

2008-05-01

In cross-sectional or cohort studies with binary outcomes, it is biologically interpretable and of interest to estimate the relative risk or prevalence ratio, especially when the response rates are not rare. Several methods have been used to estimate the relative risk, among which the log-binomial models yield the maximum likelihood estimate (MLE) of the parameters. Because of restrictions on the parameter space, the log-binomial models often run into convergence problems. Some remedies, e.g., the Poisson and Cox regressions, have been proposed. However, these methods may give out-of-bound predicted response probabilities. In this paper, a new computation method using the SAS Nonlinear Programming (NLP) procedure is proposed to find the MLEs. The proposed NLP method was compared to the COPY method, a modified method to fit the log-binomial model. Issues in the implementation are discussed. For illustration, both methods were applied to data on the prevalence of microalbuminuria (micro-protein leakage into urine) for kidney disease patients from the Diabetes Control and Complications Trial. The sample SAS macro for calculating relative risk is provided in the appendix.

Numerical solutions of ideal quantum gas dynamical flows governed by semiclassical ellipsoidal-statistical distribution

PubMed Central

Yang, Jaw-Yen; Yan, Chih-Yuan; Diaz, Manuel; Huang, Juan-Chen; Li, Zhihui; Zhang, Hanxin

2014-01-01

The ideal quantum gas dynamics as manifested by the semiclassical ellipsoidal-statistical (ES) equilibrium distribution derived in Wu et al. (Wu et al. 2012 Proc. R. Soc. A 468, 1799–1823 (doi:10.1098/rspa.2011.0673)) is numerically studied for particles of three statistics. This anisotropic ES equilibrium distribution was derived using the maximum entropy principle and conserves the mass, momentum and energy, but differs from the standard Fermi–Dirac or Bose–Einstein distribution. The present numerical method combines the discrete velocity (or momentum) ordinate method in momentum space and the high-resolution shock-capturing method in physical space. A decoding procedure to obtain the necessary parameters for determining the ES distribution is also devised. Computations of two-dimensional Riemann problems are presented, and various contours of the quantities unique to this ES model are illustrated. The main flow features, such as shock waves, expansion waves and slip lines and their complex nonlinear interactions, are depicted and found to be consistent with existing calculations for a classical gas. PMID:24399919

Polymer modified asphalt in hot mix pavement : interim report, executive summary.

DOT National Transportation Integrated Search

1988-11-01

This report presents a summary of a literature review to determine the most appropriate testing procedures for use with polymer modified asphalts. In examining testing procedures, it was necessary to study the effects of polymer modifiers on both bin...

Tested Demonstrations.

ERIC Educational Resources Information Center

Gilbert, George L., Ed.

1983-01-01

Presents background information and procedures for producing sequential color reactions. With proper selection of pH indicator dyes, most school colors can be produced after mixing colorless solutions. Procedures for producing white/purple and red/white/blue colors are outlined. Also outlines preparation of 2, 4, 2', 4',…

Remission of type 2 diabetes mellitus after bariatric surgery - comparison between procedures.

PubMed

Fernández-Soto, María L; Martín-Leyva, Ana; González-Jiménez, Amalia; García-Rubio, Jesús; Cózar-Ibáñez, Antonio; Zamora-Camacho, Francisco J; Leyva-Martínez, María S; Jiménez-Ríos, Jose A; Escobar-Jiménez, Fernándo

2017-01-01

We aimed to assess the mid-term type 2 diabetes mellitus recovery patterns in morbidly obese patients by comparing some relevant physiological parameters of patients of bariatric surgery between two types of surgical procedures: mixed (roux-en-Y gastric bypass and biliopancreatic diversion) and restrictive (sleeve gastrectomy). This is a prospective and observational study of co-morbid, type 2 diabetes mellitus evolution in 49 morbidly obese patients: 37 underwent mixed surgery procedures and 12 a restrictive surgery procedure. We recorded weight, height, body mass index, and glycaemic, lipid, and nutritional blood parameters, prior to procedure, as well as six and twelve months post-operatively. In addition, we tested for differences in patient recovery and investigated predictive factors in diabetes remission. Both glycaemic and lipid profiles diminished significantly to healthy levels by 6 and 12 months post intervention. Type 2 diabetes mellitus showed remission in more than 80% of patients of both types of surgical procedures, with no difference between them. Baseline body mass index, glycated haemoglobin, and insulin intake, among others, were shown to be valuable predictors of diabetes remission one year after the intervention. The choice of the type of surgical procedure did not significantly affect the remission rate of type 2 diabetes mellitus in morbidly obese patients. (Endokrynol Pol 2017; 68 (1): 18-25).

On the mixing and evaporation of secondary organic aerosol components.

PubMed

Loza, Christine L; Coggon, Matthew M; Nguyen, Tran B; Zuend, Andreas; Flagan, Richard C; Seinfeld, John H

2013-06-18

The physical state and chemical composition of an organic aerosol affect its degree of mixing and its interactions with condensing species. We present here a laboratory chamber procedure for studying the effect of the mixing of organic aerosol components on particle evaporation. The procedure is applied to the formation of secondary organic aerosol (SOA) from α-pinene and toluene photooxidation. SOA evaporation is induced by heating the chamber aerosol from room temperature (25 °C) to 42 °C over 7 h and detected by a shift in the peak diameter of the SOA size distribution. With this protocol, α-pinene SOA is found to be more volatile than toluene SOA. When SOA is formed from the two precursors sequentially, the evaporation behavior of the SOA most closely resembles that of SOA from the second parent hydrocarbon, suggesting that the structure of the mixed SOA resembles a core of SOA from the initial precursor coated by a layer of SOA from the second precursor. Such a core-and-shell configuration of the organic aerosol phases implies limited mixing of the SOA from the two precursors on the time scale of the experiments, consistent with a high viscosity of at least one of the phases.

Evaluation and improvement of micro-surfacing mix design method and modelling of asphalt emulsion mastic in terms of filler-emulsion interaction

NASA Astrophysics Data System (ADS)

Robati, Masoud

This Doctorate program focuses on the evaluation and improving the rutting resistance of micro-surfacing mixtures. There are many research problems related to the rutting resistance of micro-surfacing mixtures that still require further research to be solved. The main objective of this Ph.D. program is to experimentally and analytically study and improve rutting resistance of micro-surfacing mixtures. During this Ph.D. program major aspects related to the rutting resistance of micro-surfacing mixtures are investigated and presented as follow: 1) evaluation of a modification of current micro-surfacing mix design procedures: On the basis of this effort, a new mix design procedure is proposed for type III micro-surfacing mixtures as rut-fill materials on the road surface. Unlike the current mix design guidelines and specification, the new mix design is capable of selecting the optimum mix proportions for micro-surfacing mixtures; 2) evaluation of test methods and selection of aggregate grading for type III application of micro-surfacing: Within the term of this study, a new specification for selection of aggregate grading for type III application of micro-surfacing is proposed; 3) evaluation of repeatability and reproducibility of micro-surfacing mixture design tests: In this study, limits for repeatability and reproducibility of micro-surfacing mix design tests are presented; 4) a new conceptual model for filler stiffening effect on asphalt mastic of micro-surfacing: A new model is proposed, which is able to establish limits for minimum and maximum filler concentrations in the micro-surfacing mixture base on only the filler important physical and chemical properties; 5) incorporation of reclaimed asphalt pavement and post-fabrication asphalt shingles in micro-surfacing mixture: The effectiveness of newly developed mix design procedure for micro-surfacing mixtures is further validated using recycled materials. The results present the limits for the use of RAP and RAS amount in micro-surfacing mixtures; 6) new colored micro-surfacing formulations with improved durability and performance: The significant improvement of around 45% in rutting resistance of colored and conventional micro-surfacing mixtures is achieved through employing low penetration grade bitumen polymer modified asphalt emulsion stabilized using nanoparticles.

Regression analysis of mixed recurrent-event and panel-count data.

PubMed

Zhu, Liang; Tong, Xinwei; Sun, Jianguo; Chen, Manhua; Srivastava, Deo Kumar; Leisenring, Wendy; Robison, Leslie L

2014-07-01

In event history studies concerning recurrent events, two types of data have been extensively discussed. One is recurrent-event data (Cook and Lawless, 2007. The Analysis of Recurrent Event Data. New York: Springer), and the other is panel-count data (Zhao and others, 2010. Nonparametric inference based on panel-count data. Test 20: , 1-42). In the former case, all study subjects are monitored continuously; thus, complete information is available for the underlying recurrent-event processes of interest. In the latter case, study subjects are monitored periodically; thus, only incomplete information is available for the processes of interest. In reality, however, a third type of data could occur in which some study subjects are monitored continuously, but others are monitored periodically. When this occurs, we have mixed recurrent-event and panel-count data. This paper discusses regression analysis of such mixed data and presents two estimation procedures for the problem. One is a maximum likelihood estimation procedure, and the other is an estimating equation procedure. The asymptotic properties of both resulting estimators of regression parameters are established. Also, the methods are applied to a set of mixed recurrent-event and panel-count data that arose from a Childhood Cancer Survivor Study and motivated this investigation. © The Author 2014. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Parameter sensitivity analysis of the mixed Green-Ampt/Curve-Number method for rainfall excess estimation in small ungauged catchments

NASA Astrophysics Data System (ADS)

Romano, N.; Petroselli, A.; Grimaldi, S.

2012-04-01

With the aim of combining the practical advantages of the Soil Conservation Service - Curve Number (SCS-CN) method and Green-Ampt (GA) infiltration model, we have developed a mixed procedure, which is referred to as CN4GA (Curve Number for Green-Ampt). The basic concept is that, for a given storm, the computed SCS-CN total net rainfall amount is used to calibrate the soil hydraulic conductivity parameter of the Green-Ampt model so as to distribute in time the information provided by the SCS-CN method. In a previous contribution, the proposed mixed procedure was evaluated on 100 observed events showing encouraging results. In this study, a sensitivity analysis is carried out to further explore the feasibility of applying the CN4GA tool in small ungauged catchments. The proposed mixed procedure constrains the GA model with boundary and initial conditions so that the GA soil hydraulic parameters are expected to be insensitive toward the net hyetograph peak. To verify and evaluate this behaviour, synthetic design hyetograph and synthetic rainfall time series are selected and used in a Monte Carlo analysis. The results are encouraging and confirm that the parameter variability makes the proposed method an appropriate tool for hydrologic predictions in ungauged catchments. Keywords: SCS-CN method, Green-Ampt method, rainfall excess, ungauged basins, design hydrograph, rainfall-runoff modelling.

The development of spheroidal bodies theory for proto-planetary dynamics problem solving

NASA Astrophysics Data System (ADS)

Krot, A. M.

2007-08-01

There is not a full statistical equilibrium in a gas-dust proto-planetary cloud because of long relaxation time for proto-planet formation in own gravitational field. This protoplanetary system behavior can be described by Jeans equation in partial derivations relatively a distribution function. The problem for finding a general solution of Jeans equation is connected directly with an analytical expression for potential of gravitational field. Thus, the determination of gravitational potential is the main problem of statistical dynamics for proto-planetary system. The work shows this task of protoplanetary dynamics can be solved on the basis of spheroidal bodies theory [1]-[4]. Within the framework of this theory, cosmological bodies have fuzzy outlines and are represented by means of spheroidal forms. The proposed theory follows from the conception for forming a spheroidal body as a proto-planet from dust-like nebula; it permits to derive the form of distribution functions for an immovable spheroidal body [1],[2] and rotating one [3],[4] as well as their density masses (gravitational potentials and strengths) and also to find the distribution function of specific angular momentum for the rotating spheroidal body [4]. References: [1] A.M.Krot, Achievement in Modern Radioelectronics, 1996, no.8, pp.66-81 (in Russian). [2] A.M.Krot, Proc. SPIE's 13thAnnual Intern.Symp. "AeroSense", Orlando, Florida, USA, 1999, vol.3710, pp.1248-1259. [3] A.M.Krot, Proc. 35th COSPAR Scientific Assembly, Paris, France, 2004, Abstract A-00162. [4] A.Krot, Proc. EGU General Assembly, Vienna, Austria, 2006, Geophys. Res. Abstracts, vol.8, A-00216; SRef-ID: 1607-7962/gra/.

Structure of genes and an insertion element in the methane producing archaebacterium Methanobrevibacter smithii.

PubMed

Hamilton, P T; Reeve, J N

1985-01-01

DNA fragments cloned from the methanogenic archaebacterium Methanobrevibacter smithii which complement mutations in the purE and proC genes of E. coli have been sequenced. Sequence analyses, transposon mutagenesis and expression in E. coli minicells indicate that purE and proC complementations result from the synthesis of M. smithii polypeptides with molecular weights of 36,697 and 27,836 respectively. The encoding genes appear to be located in operons. The M. smithii genome contains 69% A/T basepairs (bp) which is reflected in unusual codon usages and intergenic regions containing approximately 85% A/T bp. An insertion element, designated ISM1, was found within the cloned M. smithii DNA located adjacent to the proC complementing region. ISM1 is 1381 bp in length, has 29 bp terminal inverted repeat sequences and contains one major ORF encoded in 87% of the ISM1 sequence. ISM1 is mobile, present in approximately 10 copies per genome and integration duplicates 8 bp at the site of insertion. The duplicated sequences show homology with sequences within the 29 bp terminal repeat sequence of ISM1. Comparison of our data with sequences from halophilic archaebacteria suggests that 5'GAANTTTCA and 5'TTTTAATATAAA may be consensus promoter sequences for archaebacteria. These sequences closely resemble the consensus sequences which precede Drosophila heat-shock genes (Pelham 1982; Davidson et al. 1983). Methanogens appear to employ the eubacterial system of mRNA: 16SrRNA hybridization to ensure initiation of translation; the consensus ribosome binding sequence is 5'AGGTGA.

The gap of the area-weighted Motzkin spin chain is exponentially small

NASA Astrophysics Data System (ADS)

Levine, Lionel; Movassagh, Ramis

2017-06-01

We prove that the energy gap of the model proposed by Zhang et al (2016 arXiv:1606.07795) is exponentially small in the square of the system size. In Movassagh and Shor (2016 Proc. Natl Acad. Sci. USA) a class of exactly solvable quantum spin chain models was proposed that have integer spins (s), with a nearest neighbors Hamiltonian, and a unique ground state. The ground state can be seen as a uniform superposition of all s-colored Motzkin walks. The half-chain entanglement entropy provably violates the area law by a square root factor in the system’s size (˜\\sqrt{n} ) for s  >  1. For s  =  1, the violation is logarithmic (Bravyi et al 2012 Phys. Rev. Lett. 109 207202). Moreover in Movassagh and Shor (2016 Proc. Natl Acad. Sci. USA) it was proved that the gap vanishes polynomially and is O(n -c ) with c≥slant2 . Recently, a deformation of Movassagh and Shor (2016 Proc. Natl Acad. Sci. USA), which we call ‘weighted Motzkin quantum spin chain’ was proposed Zhang et al (2016 arXiv:1606.07795). This model has a unique ground state that is a superposition of the s-colored Motzkin walks weighted by tarea\\{Motzkin walk\\} with t  >  1. The most surprising feature of this model is that it violates the area law by a factor of n. Here we prove that the gap of this model is upper bounded by 8ns t-n2/3 for t  >  1 and s  >  1.

Children's Menu Diversity: Influence on Fluoride Absorption and Excretion.

PubMed

Cavalli, Andreany M; Flório, Flávia M

2018-01-01

The aim of this study is to determine the influence of children's menu diversity on the absorption and excretion of fluoride. The experimental, longitudinal, quantitative study was carried out in a city without fluoridation in water supply. A total of 16 adult volunteers (>63.9 kg) participated in the study who, after a 12-hour fast, ingested two types of children's meals, whose quantity and diversity were determined after weighing the meals best consumed by children at a kindergarten in Campinas, Sao Paulo: Simple child meal (SCM; n = 8) and hearty child meal (HCM; n = 8). The fluoride gel residual after professional application (12,300 ppm, 30.75 mg F, pH = 4.65) was simulated 15 minutes after feeding. Saliva samples (in time intervals of 0, 15, 30, and 45 minutes and 1, 2, 3, 4, 6, and 12 hours after ingestion of the fluorine solution) and urine of the volunteers were analyzed at 24 hours. Fluoride concentrations were determined using a selective ion electrode. Data were analyzed by analysis of variance for repeated measurements (PROC MIXED)/Tukey-Kramer. The concentrations of fluoride in saliva at 0 and 15 minutes and after 6 hours were the same between groups (p > 0.05). From 30 minutes to 4 hours after ingestion, the SCM group showed a higher concentration of fluoride in the saliva, which has a higher absorption (p < 0.05). The fluoride concentration in the urine did not differ between groups at both collection times (p > 0.05), and for both, the fluoride concentration in the urine increased in the final measurement (p < 0.05). The children's menu diversity influenced the absorption of fluoride so that the topical application of fluoride should be performed in infants fed preferably after the fuller diet and following the established guidelines to ensure the safety of the procedure. Knowledge of the influence of the children's menu diversity on fluoride metabolism after professional application is important so that the actions of fluoride therapy may be planned in a safer manner and be based on the reality of the universe of children.

Fitting parametric random effects models in very large data sets with application to VHA national data

PubMed Central

2012-01-01

Background With the current focus on personalized medicine, patient/subject level inference is often of key interest in translational research. As a result, random effects models (REM) are becoming popular for patient level inference. However, for very large data sets that are characterized by large sample size, it can be difficult to fit REM using commonly available statistical software such as SAS since they require inordinate amounts of computer time and memory allocations beyond what are available preventing model convergence. For example, in a retrospective cohort study of over 800,000 Veterans with type 2 diabetes with longitudinal data over 5 years, fitting REM via generalized linear mixed modeling using currently available standard procedures in SAS (e.g. PROC GLIMMIX) was very difficult and same problems exist in Stata’s gllamm or R’s lme packages. Thus, this study proposes and assesses the performance of a meta regression approach and makes comparison with methods based on sampling of the full data. Data We use both simulated and real data from a national cohort of Veterans with type 2 diabetes (n=890,394) which was created by linking multiple patient and administrative files resulting in a cohort with longitudinal data collected over 5 years. Methods and results The outcome of interest was mean annual HbA1c measured over a 5 years period. Using this outcome, we compared parameter estimates from the proposed random effects meta regression (REMR) with estimates based on simple random sampling and VISN (Veterans Integrated Service Networks) based stratified sampling of the full data. Our results indicate that REMR provides parameter estimates that are less likely to be biased with tighter confidence intervals when the VISN level estimates are homogenous. Conclusion When the interest is to fit REM in repeated measures data with very large sample size, REMR can be used as a good alternative. It leads to reasonable inference for both Gaussian and non-Gaussian responses if parameter estimates are homogeneous across VISNs. PMID:23095325

Performance, egg quality, and blood plasma chemistry of laying hens fed hempseed and hempseed oil.

PubMed

Neijat, M; Gakhar, N; Neufeld, J; House, J D

2014-11-01

The aim of this study was to compare the performance of hens (feed intake, rate of lay, egg weight, and BW gain), egg quality and blood biochemistry (enzymes, electrolytes, proteins, and other plasma constituents) of laying hens fed diets containing hemp products. Forty-eight Lohmann LSL-Classic (white-egg layers; 19 wk of age) were individually caged and fed 1 of 6 wheat-barley-soybean-based diets for a period of 12 wk. The diets consisted of hempseed (HS; 10, 20, or 30%), hempseed oil (HO; 4.5 or 9.0%), or a control diet (corn oil-based). All diets were formulated to contain similar levels of crude fat (11%), energy (2,800 kcal/kg), and CP (17%). Data were analyzed as a completely randomized design using the repeated measure analysis of the PROC MIXED procedure of SAS. The results indicated that the inclusion of up to 30 and 9.0% HS and HO, respectively, to diets of laying hens had no significant effects on hen performance, egg quality, or plasma level of metabolites (proteins, glucose, uric acid, and cholesterol) and electrolytes (Na, K, Cl, P, and Ca). Overall plasma enzyme concentrations, particularly gamma-glutamyl transferase, were significantly (P < 0.01) lowest at the 10 and 20% levels of HS inclusion, or at the 4.5% HO level of inclusion of the hempseed products compared with the higher levels or control fed hens. Similar effects were also observed for plasma aspartate aminotransferase levels but with the HS enriched diets only (P < 0.05), particularly being lowest at the inclusion levels of 10 and 20% HS compared with the control. The results may imply a possible protective effect of HS- and HO-containing diets, particularly at 10% HS, 20% HS, and 4.5% HO levels, on liver damage/injury. In summary, both HO and HS appear to be well tolerated by laying hens as judged by markers of plasma clinical chemistry supporting the safety and efficacy of hemp products for use in laying hen rations. ©2014 Poultry Science Association Inc.

Effect of flaxseed oil and microalgae DHA on the production performance, fatty acids and total lipids of egg yolk and plasma in laying hens.

PubMed

Neijat, M; Ojekudo, O; House, J D

2016-12-01

The incorporation of omega-3 polyunsaturated fatty acids (PUFA) in the egg is dependent on both the transfer efficiency of preformed dietary omega-3 fatty acids to the eggs as well as endogenous PUFA metabolism and deposition. Employing an experimental design consisting of 70 Lohmann LSL-Classic hens (n=10/treatment) in a 6-week feeding trial, we examined the impact of graded levels of either flaxseed oil (alpha-linolenic acid, ALA) or algal DHA (preformed docosahexaenoic acid, DHA), each supplying 0.20%, 0.40% and 0.60% total omega-3s. The control diet was practically low in omega-3s. Study parameters included monitoring the changes of fatty acid contents in yolk, measures of hen performance, eggshell quality, total lipids and fatty acid contents of plasma. Data were analysed as a complete randomized design using Proc Mixed procedure of SAS. No significant differences were observed between treatments with respect to hen performance, eggshell quality and cholesterol content in plasma and egg yolk. Individual and total omega-3 PUFA in the yolk and plasma increased (P<0.0001) linearly as a function of total omega-3 PUFA intake. At the highest inclusion levels, DHA-fed hens incorporated 3-fold more DHA in eggs compared with ALA-fed hens (179±5.55 vs. 66.7±2.25mg/yolk, respectively). In both treatment groups, maximal enrichment of total n-3 PUFA was observed by week-2, declined by week-4 and leveled thereafter. In addition, accumulation of DHA in egg yolk showed linear (P<0.0001) and quadratic (P<0.05) effects for flaxseed oil (R 2 =0.89) and algal DHA (R 2 =0.95). The current data, based on defined level of total omega-3s in the background diet, provides evidence to suggest that exogenous as well as endogenous synthesis of DHA may be subject to a similar basis of regulation, and serve to highlight potential regulatory aspects explaining the limitations in the deposition of endogenously produced omega-3 LCPUFA. Copyright © 2016 Elsevier Ltd. All rights reserved.

Individual and contextual factors related to dental caries in underprivileged Brazilian adolescents.

PubMed

Vazquez, Fabiana de Lima; Cortellazzi, Karine Laura; Kaieda, Armando Koichiro; Bulgareli, Jaqueline Vilela; Mialhe, Fabio Luiz; Ambrosano, Glaucia Maria Bovi; da Silva Tagliaferro, Elaine Pereira; Guerra, Luciane Miranda; de Castro Meneghim, Marcelo; Pereira, Antonio Carlos

2015-01-20

Investigate the individual and contextual variables related to caries in underprivileged adolescents, and the disparity in distribution of the disease. Cross-sectional analytical study, conducted in the city of Piracicaba, SP, Brazil, in 2012. The probabilistic sample was composed of 1,179 adolescents from 15-19 years of age, randomly selected from 21 state schools and 34 Primary Health Units--Family Health (PHU-FH). The dependent variables studied were number of decayed teeth and caries experience (DMFT). The independent variables were classified into individual (clinical, sociodemographic, psychosocial, self-perception, impact on oral health, access to services, and quality of life) and contextual (social exclusion index, total number of residents in suburb, literacy rate, and the following variables given in percentages: residences in the home ownership category, provision of domestic sewerage, trash collection, families with income of over 1 minimum wage per month, and families without monthly income) variables. The multilevel regression model was estimated by the PROC GLIMMIX (Generalized Linear Models-Mixed) procedure, considering the individual variables as Level 1 and the contextual variables of the suburbs as Level 2. Adjustment of the model was evaluated by -2 Res Log Likelihood with α = 0.05. As regards the individual variables, adolescents who declared having a prison inmate in the Family and resided in homes with a larger number of persons, showed a higher number of decayed teeth. There were a larger number of decayed teeth, a higher DMFT value, and worse self-perception as regards the health of their teeth and mouth. Other variables, such as being of the female gender, age and time since last visit to the dentist were related to the DMFT index. As regards the contextual variables, the DMFT was lower in suburbs with greater access to domestic sewage, and the number of decayed teeth was higher in suburbs with the worst social exclusion indices. Individual and contextual variables were associated with the presence of caries and DMFT index in underprivileged adolescents, indicating that they must be taken into consideration in the formulation of policies directed towards oral health promotion and prevention activities in this group.

Mission Assurance: Issues and Challenges

DTIC Science & Technology

2010-07-15

JFQ), Summer 1995. [9] Alberts , C.J. & Dorofee, A.J., “Mission Assurance Analysis Protocol (MAAP): Assessing Risk in Complex Environments... CAMUS : Automatically Mapping Cyber Assets to Missions and Users,” Proc. of the 2010 Military Communications Conference (MILCOM 2009), 2009. [23

Finite-element modeling of soft tissue rolling indentation.

PubMed

Sangpradit, Kiattisak; Liu, Hongbin; Dasgupta, Prokar; Althoefer, Kaspar; Seneviratne, Lakmal D

2011-12-01

We describe a finite-element (FE) model for simulating wheel-rolling tissue deformations using a rolling FE model (RFEM). A wheeled probe performing rolling tissue indentation has proven to be a promising approach for compensating for the loss of haptic and tactile feedback experienced during robotic-assisted minimally invasive surgery (H. Liu, D. P. Noonan, B. J. Challacombe, P. Dasgupta, L. D. Seneviratne, and K. Althoefer, "Rolling mechanical imaging for tissue abnormality localization during minimally invasive surgery, " IEEE Trans. Biomed. Eng., vol. 57, no. 2, pp. 404-414, Feb. 2010; K. Sangpradit, H. Liu, L. Seneviratne, and K. Althoefer, "Tissue identification using inverse finite element analysis of rolling indentation," in Proc. IEEE Int. Conf. Robot. Autom. , Kobe, Japan, 2009, pp. 1250-1255; H. Liu, D. Noonan, K. Althoefer, and L. Seneviratne, "The rolling approach for soft tissue modeling and mechanical imaging during robot-assisted minimally invasive surgery," in Proc. IEEE Int. Conf. Robot. Autom., May 2008, pp. 845-850; H. Liu, P. Puangmali, D. Zbyszewski, O. Elhage, P. Dasgupta, J. S. Dai, L. Seneviratne, and K. Althoefer, "An indentation depth-force sensing wheeled probe for abnormality identification during minimally invasive surgery," Proc. Inst. Mech. Eng., H, vol. 224, no. 6, pp. 751-63, 2010; D. Noonan, H. Liu, Y. Zweiri, K. Althoefer, and L. Seneviratne, "A dual-function wheeled probe for tissue viscoelastic property identification during minimally invasive surgery," in Proc. IEEE Int. Conf. Robot. Autom. , 2008, pp. 2629-2634; H. Liu, J. Li, Q. I. Poon, L. D. Seneviratne, and K. Althoefer, "Miniaturized force indentation-depth sensor for tissue abnormality identification," IEEE Int. Conf. Robot. Autom., May 2010, pp. 3654-3659). A sound understanding of wheel-tissue rolling interaction dynamics will facilitate the evaluation of signals from rolling indentation. In this paper, we model the dynamic interactions between a wheeled probe and a soft tissue sample using the ABAQUS FE software package. The aim of this work is to more precisely locate abnormalities within soft tissue organs using RFEM and hence aid surgeons to improve diagnostic ability. The soft tissue is modeled as a nonlinear hyperelastic material with geometrical nonlinearity. The proposed RFEM was validated on a silicone phantom and a porcine kidney sample. The results show that the proposed method can predict the wheel-tissue interaction forces of rolling indentation with good accuracy and can also accurately identify the location and depth of simulated tumors.

40 CFR 60.93 - Test methods and procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Test methods and procedures. 60.93 Section 60.93 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Hot Mix Asphalt...

40 CFR 60.93 - Test methods and procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 7 2012-07-01 2012-07-01 false Test methods and procedures. 60.93 Section 60.93 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Hot Mix Asphalt...

40 CFR 60.93 - Test methods and procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Test methods and procedures. 60.93 Section 60.93 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Hot Mix Asphalt...

40 CFR 60.93 - Test methods and procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Test methods and procedures. 60.93 Section 60.93 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Hot Mix Asphalt...

Simulation of time-control procedures for terminal area flow management

NASA Technical Reports Server (NTRS)

Alcabin, M.; Erzberger, H.; Tobias, L.; Obrien, P. J.

1985-01-01

Simulations of a terminal area traffic-management system incorporating automated scheduling and time-control (four-dimensional) techniques conducted at NASA Ames Research Center jointly with the Federal Aviation Administration, have shown that efficient procedures can be developed for handling a mix of 4D-equipped and conventionally equipped aircraft. A crucial role in this system is played by an ATC host computer algorithm, referred to as a speed advisory, that allows controllers to maintain accurate time schedules of the conventionally equipped aircraft in the traffic mix. Results are of the most recent simulations in which two important special cases were investigated. First, the effects of a speed advisory on touchdown time scheduling are examined, when unequipped aircraft are constrained to follow fuel-optimized profiles in the near-terminal area, and rescheduling procedures are developed to handle missed approaches of 4D-equipped aircraft. Various performance measures, including controller opinion, are used to evaluate the effectiveness of the procedures.

Modular Engine Noise Component Prediction System (MCP) Technical Description and Assessment Document

NASA Technical Reports Server (NTRS)

Herkes, William H.; Reed, David H.

2005-01-01

This report describes an empirical prediction procedure for turbofan engine noise. The procedure generates predicted noise levels for several noise components, including inlet- and aft-radiated fan noise, and jet-mixing noise. This report discusses the noise source mechanisms, the development of the prediction procedures, and the assessment of the accuracy of these predictions. Finally, some recommendations for future work are presented.

Longitudinal data analyses using linear mixed models in SPSS: concepts, procedures and illustrations.

PubMed

Shek, Daniel T L; Ma, Cecilia M S

2011-01-05

Although different methods are available for the analyses of longitudinal data, analyses based on generalized linear models (GLM) are criticized as violating the assumption of independence of observations. Alternatively, linear mixed models (LMM) are commonly used to understand changes in human behavior over time. In this paper, the basic concepts surrounding LMM (or hierarchical linear models) are outlined. Although SPSS is a statistical analyses package commonly used by researchers, documentation on LMM procedures in SPSS is not thorough or user friendly. With reference to this limitation, the related procedures for performing analyses based on LMM in SPSS are described. To demonstrate the application of LMM analyses in SPSS, findings based on six waves of data collected in the Project P.A.T.H.S. (Positive Adolescent Training through Holistic Social Programmes) in Hong Kong are presented.

Longitudinal Data Analyses Using Linear Mixed Models in SPSS: Concepts, Procedures and Illustrations

PubMed Central

Shek, Daniel T. L.; Ma, Cecilia M. S.

2011-01-01

Although different methods are available for the analyses of longitudinal data, analyses based on generalized linear models (GLM) are criticized as violating the assumption of independence of observations. Alternatively, linear mixed models (LMM) are commonly used to understand changes in human behavior over time. In this paper, the basic concepts surrounding LMM (or hierarchical linear models) are outlined. Although SPSS is a statistical analyses package commonly used by researchers, documentation on LMM procedures in SPSS is not thorough or user friendly. With reference to this limitation, the related procedures for performing analyses based on LMM in SPSS are described. To demonstrate the application of LMM analyses in SPSS, findings based on six waves of data collected in the Project P.A.T.H.S. (Positive Adolescent Training through Holistic Social Programmes) in Hong Kong are presented. PMID:21218263

Medical and biohazardous waste generator`s guide: Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-09-01

This Guide describes the procedures required to comply with all federal and state laws and regulations and Lawrence Berkeley Laboratory (LBL) policy applicable to medical and biohazardous waste. The members of the LBL Biological Safety Subcommittee participated in writing these policies and procedures. The procedures and policies in this Guide apply to LBL personnel who work with infectious agents or potentially infectious agents, publicly perceived infectious items or materials (e.g., medical gloves, culture dishes), and sharps (e.g., needles, syringes, razor blades). If medical or biohazardous waste is contaminated or mixed with a hazardous chemical or material, with a radioactive material,more » or with both, the waste will be handled in accordance with the applicable federal and State of California laws and regulations for hazardous, radioactive, or mixed waste.« less

Do Mixed-Flora Preoperative Urine Cultures Matter?

PubMed

Polin, Michael R; Kawasaki, Amie; Amundsen, Cindy L; Weidner, Alison C; Siddiqui, Nazema Y

2017-06-01

To determine whether mixed-flora preoperative urine cultures, as compared with no-growth preoperative urine cultures, are associated with a higher prevalence of postoperative urinary tract infections (UTIs). This was a retrospective cohort study. Women who underwent urogynecologic surgery were included if their preoperative clean-catch urine culture result was mixed flora or no growth. Women were excluded if they received postoperative antibiotics for reasons other than treatment of a UTI. Women were divided into two cohorts based on preoperative urine culture results-mixed flora or no growth; the prevalence of postoperative UTI was compared between cohorts. Baseline characteristics were compared using χ 2 or Student t tests. A logistic regression analysis then was performed. We included 282 women who were predominantly postmenopausal, white, and overweight. There were many concomitant procedures; 46% underwent a midurethral sling procedure and 68% underwent pelvic organ prolapse surgery. Preoperative urine cultures resulted as mixed flora in 192 (68%) and no growth in 90 (32%) patients. Overall, 14% were treated for a UTI postoperatively. There was no difference in the proportion of patients treated for a postoperative UTI between the two cohorts (25 mixed flora vs 13 no growth, P = 0.77). These results remained when controlling for potentially confounding variables in a logistic regression model (adjusted odds ratio 0.92, 95% confidence interval 0.43-1.96). In women with mixed-flora compared with no-growth preoperative urine cultures, there were no differences in the prevalence of postoperative UTI. The clinical practice of interpreting mixed-flora cultures as negative is appropriate.

Evaluation of the Efficacy of Different Mixing Techniques and Disinfection on Microbial Colonization of Polyether Impression Materials: A Comparative Study.

PubMed

Singla, Youginder; Pachar, Renu B; Poriya, Sangeeta; Mishra, Aalok; Sharma, Rajni; Garg, Anshu

2018-03-01

This study aims to determine the role of mixing techniques of polyether impression materials and efficacy of disinfection on microbial colonization of these impression materials. Polyether impression material was mixed using two methods: First by hand mixing (group I) and second using an automixer (group II) with a total of 100 samples. Four microbial strains were studied, which included Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans. After incubation, the bacterial colonies were counted, and then, disinfectant solution was applied. The effect of disinfection solution was evaluated for each specimen. The surface of polyether impression materials mixed with an automixer has less number of voids and overall a smoother surface as compared with the hand-mixed ones. On comparing the disinfection procedures, i.e., specimens without any disinfection and specimens after disinfection, statistically highly significant difference was seen between all the groups. We can conclude that impression mixing procedures are important in determining the surface characteristics of the impression and ultimately the colonization of bacteria and also determine the importance of disinfection on microbial colonization. This study emphasises the deleterious role of nosocomial infections and specific measures that should be taken regarding the prevention of such diseases. Dental impressions are proved to be a source of such infections and may lead to transmission of such diseases. Thus, proper measures should be taken right from the first step of impression taking to minimizing and preventing such kind of contaminations in clinical practice.

An Assessment of Three Procedures to Teach Echoic Responding

ERIC Educational Resources Information Center

Cividini-Motta, Catia; Scharrer, Nicole; Ahearn, William H.

2017-01-01

The research literature has revealed mixed outcomes on various procedures for increasing vocalizations and echoic responding in persons with disabilities (Miguel, Carr, & Michael "The Analysis of Verbal Behavior," 18, 3-13, 2002; Stock, Schulze, & Mirenda "The Analysis of Verbal Behavior," 24, 123-133, 2008). We…

PROcEED: Probabilistic reverse dosimetry approaches for estimating exposure distributions

EPA Science Inventory

As increasing amounts of biomonitoring survey data become available, a new discipline focused on converting such data into estimates of chemical exposures has developed. Reverse dosimetry uses a pharmacokinetic model along with measured biomarker concentrations to determine the p...

Testing of a Shrouded, Short Mixing Stack Gas Eductor Model Using High Temperature Primary Flow.

DTIC Science & Technology

1982-10-01

problem but of less significance than the heated surfaces of shipboard structure. Various types of electronic equipments and sensors carried by a combatant...here was to validate current procedures by comparison with previous data it was not considered essential to rein- stall these sensors or duplicate...sec) 205 tABLE XIX Mixing Stack Temperatura Data, Model B Thermocouple Axial Mixing Stack Temperature _ mbjr Posii--- .. (I IF) . Uptake 180 850 950

Modeling of dough mixing profile under thermal and non thermal constraint for evalution of breadmaking quality of Hard Spring Wheat flour

USDA-ARS?s Scientific Manuscript database

This research was initiated to investigate the association between flour breadmaking traits and mixing characteristics and empirical dough rheological property under thermal stress. Flour samples from 30 hard spring wheat were analyzed by a mixolab standard procedure at optimum water absorptions. Mi...

The effects of the sequential addition of synthesis parameters on the performance of alkali activated fly ash mortar

NASA Astrophysics Data System (ADS)

Dassekpo, Jean-Baptiste Mawulé; Zha, Xiaoxiong; Zhan, Jiapeng; Ning, Jiaqian

Geopolymer is an energy efficient and sustainable material that is currently used in construction industry as an alternative for Portland cement. As a new material, specific mix design method is essential and efforts have been made to develop a mix design procedure with the main focus on achieving better compressive strength and economy. In this paper, a sequential addition of synthesis parameters such as fly ash-sand, alkaline liquids, plasticizer and additional water at well-defined time intervals was investigated. A total of 4 mix procedures were used to study the compressive performance on fly ash-based geopolymer mortar and the results of each method were analyzed and discussed. Experimental results show that the sequential addition of sodium hydroxide (NaOH), sodium silicate (Na2SiO3), plasticizer (PL), followed by adding water (WA) increases considerably the compressive strengths of the geopolymer-based mortar. These results clearly demonstrate the high significant influence of sequential addition of synthesis parameters on geopolymer materials compressive properties, and also provide a new mixing method for the preparation of geopolymer paste, mortar and concrete.

State space approach to mixed boundary value problems.

NASA Technical Reports Server (NTRS)

Chen, C. F.; Chen, M. M.

1973-01-01

A state-space procedure for the formulation and solution of mixed boundary value problems is established. This procedure is a natural extension of the method used in initial value problems; however, certain special theorems and rules must be developed. The scope of the applications of the approach includes beam, arch, and axisymmetric shell problems in structural analysis, boundary layer problems in fluid mechanics, and eigenvalue problems for deformable bodies. Many classical methods in these fields developed by Holzer, Prohl, Myklestad, Thomson, Love-Meissner, and others can be either simplified or unified under new light shed by the state-variable approach. A beam problem is included as an illustration.

The mixed-mode bending method for delamination testing

NASA Technical Reports Server (NTRS)

Reeder, James R.; Crews, John H., Jr.

1989-01-01

A mixed-mode bending (MMB) test procedure is presented which combines double cantilever beam mode-I loading and end-notch flexure mode II loading on a split, unidirectional laminate. The MMB test has been analyzed by FEM and by beam theory in order to ascertain the mode I and mode II components' respective strain energy release rates, G(I) and G(II); these analyses indicate that a wide range of G(I)/G(II) ratios can be generated by varying the applied load's position on the loading lever. The MMB specimen analysis and test procedures are demonstrated for the case of AS4/PEEK unidirectional laminates.

The PX-EM algorithm for fast stable fitting of Henderson's mixed model

PubMed Central

Foulley, Jean-Louis; Van Dyk, David A

2000-01-01

This paper presents procedures for implementing the PX-EM algorithm of Liu, Rubin and Wu to compute REML estimates of variance covariance components in Henderson's linear mixed models. The class of models considered encompasses several correlated random factors having the same vector length e.g., as in random regression models for longitudinal data analysis and in sire-maternal grandsire models for genetic evaluation. Numerical examples are presented to illustrate the procedures. Much better results in terms of convergence characteristics (number of iterations and time required for convergence) are obtained for PX-EM relative to the basic EM algorithm in the random regression. PMID:14736399

Toward Contactless Biology: Acoustophoretic DNA Transfection

NASA Astrophysics Data System (ADS)

Vasileiou, Thomas; Foresti, Daniele; Bayram, Adem; Poulikakos, Dimos; Ferrari, Aldo

2016-02-01

Acoustophoresis revolutionized the field of container-less manipulation of liquids and solids by enabling mixing procedures which avoid contamination and loss of reagents due to the contact with the support. While its applications to chemistry and engineering are straightforward, additional developments are needed to obtain reliable biological protocols in a contactless environment. Here, we provide a first, fundamental step towards biological reactions in air by demonstrating the acoustophoretic DNA transfection of mammalian cells. We developed an original acoustophoretic design capable of levitating, moving and mixing biological suspensions of living mammalians cells and of DNA plasmids. The precise and sequential delivery of the mixed solutions into tissue culture plates is actuated by a novel mechanism based on the controlled actuation of the acoustophoretic force. The viability of the contactless procedure is tested using a cellular model sensitive to small perturbation of neuronal differentiation pathways. Additionally, the efficiency of the transfection procedure is compared to standard, container-based methods for both single and double DNA transfection and for different cell types including adherent growing HeLa cancer cells, and low adhesion neuron-like PC12 cells. In all, this work provides a proof of principle which paves the way to the development of high-throughput acoustophoretic biological reactors.

Toward Contactless Biology: Acoustophoretic DNA Transfection.

PubMed

Vasileiou, Thomas; Foresti, Daniele; Bayram, Adem; Poulikakos, Dimos; Ferrari, Aldo

2016-02-01

Acoustophoresis revolutionized the field of container-less manipulation of liquids and solids by enabling mixing procedures which avoid contamination and loss of reagents due to the contact with the support. While its applications to chemistry and engineering are straightforward, additional developments are needed to obtain reliable biological protocols in a contactless environment. Here, we provide a first, fundamental step towards biological reactions in air by demonstrating the acoustophoretic DNA transfection of mammalian cells. We developed an original acoustophoretic design capable of levitating, moving and mixing biological suspensions of living mammalians cells and of DNA plasmids. The precise and sequential delivery of the mixed solutions into tissue culture plates is actuated by a novel mechanism based on the controlled actuation of the acoustophoretic force. The viability of the contactless procedure is tested using a cellular model sensitive to small perturbation of neuronal differentiation pathways. Additionally, the efficiency of the transfection procedure is compared to standard, container-based methods for both single and double DNA transfection and for different cell types including adherent growing HeLa cancer cells, and low adhesion neuron-like PC12 cells. In all, this work provides a proof of principle which paves the way to the development of high-throughput acoustophoretic biological reactors.

Toward Contactless Biology: Acoustophoretic DNA Transfection

PubMed Central

Vasileiou, Thomas; Foresti, Daniele; Bayram, Adem; Poulikakos, Dimos; Ferrari, Aldo

2016-01-01

Acoustophoresis revolutionized the field of container-less manipulation of liquids and solids by enabling mixing procedures which avoid contamination and loss of reagents due to the contact with the support. While its applications to chemistry and engineering are straightforward, additional developments are needed to obtain reliable biological protocols in a contactless environment. Here, we provide a first, fundamental step towards biological reactions in air by demonstrating the acoustophoretic DNA transfection of mammalian cells. We developed an original acoustophoretic design capable of levitating, moving and mixing biological suspensions of living mammalians cells and of DNA plasmids. The precise and sequential delivery of the mixed solutions into tissue culture plates is actuated by a novel mechanism based on the controlled actuation of the acoustophoretic force. The viability of the contactless procedure is tested using a cellular model sensitive to small perturbation of neuronal differentiation pathways. Additionally, the efficiency of the transfection procedure is compared to standard, container-based methods for both single and double DNA transfection and for different cell types including adherent growing HeLa cancer cells, and low adhesion neuron-like PC12 cells. In all, this work provides a proof of principle which paves the way to the development of high-throughput acoustophoretic biological reactors. PMID:26828312

HTR2A A-1438G/T102C polymorphisms predict negative symptoms performance upon aripiprazole treatment in schizophrenic patients.

PubMed

Chen, Shih-Fen; Shen, Yu-Chih; Chen, Chia-Hsiang

2009-08-01

Aripiprazole acts as a partial agonist at dopamine D2 and D3 and serotonin 1A receptors and as an antagonist at serotonin 2A receptors (HTR2A). Since aripiprazole acts as an antagonist at HTR2A, genetic variants of HTR2A may be important in explaining variability in response to aripiprazole. This study investigated whether the efficacy of aripiprazole can be predicted by functional HTR2A A-1438G/T102C polymorphisms (rs63311/rs6313) as modified by clinical factors in Han Chinese hospitalized patients with acutely exacerbated schizophrenia. After hospitalization, the patients (n = 128) were given a 4-week course of aripiprazole. Patients were genotyped for HTR2A A-1438G/T102C polymorphisms via the restriction fragment length polymorphism method. Clinical factors such as gender, age, duration of illness, education level, diagnostic subtype, and medication dosage were noted as well. The researchers measured psychopathology biweekly, using the Positive and Negative Syndrome Scale (PANSS). A mixed model regression approach (SAS Proc MIXED) was used to analyze the effects of genetic and clinical factors on PANSS performance after aripiprazole treatment. We found that the GG/CC genotype group of HTR2A A-1438G/T102C polymorphisms predicts poor aripiprazole response specifically for negative symptoms. In addition, the clinical factors, including dosage of aripiprazole, age, duration of illness, and diagnostic subtype, were found to influence PANSS performance after aripiprazole treatment. The data suggest HTR2A A-1438G/T102C polymorphisms may predict negative symptoms performance upon aripiprazole treatment in schizophrenic patients as modified by clinical factors.

Factors that influence length of stay for in-patient gynaecology surgery: is the Case Mix Group (CMG) or type of procedure more important?

PubMed

Carey, Mark S; Victory, Rahi; Stitt, Larry; Tsang, Nicole

2006-02-01

To compare the association between the Case Mix Group (CMG) code and length of stay (LOS) with the association between the type of procedure and LOS in patients admitted for gynaecology surgery. We examined the records of women admitted for surgery in CMG 579 (major uterine/adnexal procedure, no malignancy) or 577 (major surgery ovary/adnexa with malignancy) between April 1997 and March 1999. Factors thought to influence LOS included age, weight, American Society of Anesthesiologists (ASA) score, physician, day of the week on which surgery was performed, and procedure type. Procedures were divided into six categories, four for CMG 579 and two for CMG 577. Data were abstracted from the hospital information costing system (T2 system) and by retrospective chart review. Multivariable analysis was performed using linear regression with backwards elimination. There were 606 patients in CMG 579 and 101 patients in CMG 577, and the corresponding median LOS was four days (range 1-19) for CMG 579 and nine days (range 3-30) for CMG 577. Combined analysis of both CMGs 577 and 579 revealed the following factors as highly significant determinants of LOS: procedure, age, physician, and ASA score. Although confounded by procedure type, the CMG did not significantly account for differences in LOS in the model if procedure was considered. Pairwise comparisons of procedure categories were all found to be statistically significant, even when controlled for other important variables. The type of procedure better accounts for differences in LOS by describing six statistically distinct procedure groups rather than the traditional two CMGs. It is reasonable therefore to consider changing the current CMG codes for gynaecology to a classification based on the type of procedure.

Including mixed methods research in systematic reviews: Examples from qualitative syntheses in TB and malaria control

PubMed Central

2012-01-01

Background Health policy makers now have access to a greater number and variety of systematic reviews to inform different stages in the policy making process, including reviews of qualitative research. The inclusion of mixed methods studies in systematic reviews is increasing, but these studies pose particular challenges to methods of review. This article examines the quality of the reporting of mixed methods and qualitative-only studies. Methods We used two completed systematic reviews to generate a sample of qualitative studies and mixed method studies in order to make an assessment of how the quality of reporting and rigor of qualitative-only studies compares with that of mixed-methods studies. Results Overall, the reporting of qualitative studies in our sample was consistently better when compared with the reporting of mixed methods studies. We found that mixed methods studies are less likely to provide a description of the research conduct or qualitative data analysis procedures and less likely to be judged credible or provide rich data and thick description compared with standalone qualitative studies. Our time-related analysis shows that for both types of study, papers published since 2003 are more likely to report on the study context, describe analysis procedures, and be judged credible and provide rich data. However, the reporting of other aspects of research conduct (i.e. descriptions of the research question, the sampling strategy, and data collection methods) in mixed methods studies does not appear to have improved over time. Conclusions Mixed methods research makes an important contribution to health research in general, and could make a more substantial contribution to systematic reviews. Through our careful analysis of the quality of reporting of mixed methods and qualitative-only research, we have identified areas that deserve more attention in the conduct and reporting of mixed methods research. PMID:22545681

Proposing a Comprehensive Model for Identifying Teaching Candidates

ERIC Educational Resources Information Center

Bowles, Terry; Hattie, John; Dinham, Stephen; Scull, Janet; Clinton, Janet

2014-01-01

Teacher education in universities continues to diversify in the twenty-first century. Just as course offerings, course delivery, staffing and the teaching/research mix varies extensively from university to university so does the procedure for pre-service teacher selection. Various factors bear on selection procedures and practices however few…

Masonry Procedures. Building Maintenance. Module V. Instructor's Guide.

ERIC Educational Resources Information Center

Eck, Francis

This curriculum guide, one of six modules keyed to the building maintenance competency profile developed by industry and education professionals, provides materials for a masonry procedures unit containing eight lessons. Lesson topics are masonry safety practices; set forms; mix concrete; patch and/or repair concrete; pour and finish concrete; mix…

Comparative Robustness of Recent Methods for Analyzing Multivariate Repeated Measures Designs

ERIC Educational Resources Information Center

Seco, Guillermo Vallejo; Gras, Jaime Arnau; Garcia, Manuel Ato

2007-01-01

This study evaluated the robustness of two recent methods for analyzing multivariate repeated measures when the assumptions of covariance homogeneity and multivariate normality are violated. Specifically, the authors' work compares the performance of the modified Brown-Forsythe (MBF) procedure and the mixed-model procedure adjusted by the…

Effects of vigorous mixing of blood vacuum tubes on laboratory test results.

PubMed

Lima-Oliveira, Gabriel; Lippi, Giuseppe; Salvagno, Gian Luca; Montagnana, Martina; Gelati, Matteo; Volanski, Waldemar; Boritiza, Katia Cristina; Picheth, Geraldo; Guidi, Gian Cesare

2013-02-01

To evaluate the effect of tubes mixing (gentle vs. vigorous) on diagnostic blood specimens collected in vacuum tube systems by venipuncture. Blood was collected for routine coagulation, immunochemistry and hematological testing from one hundred volunteers into six vacuum tubes: two 3.6 mL vacuum tubes containing 0.4 mL of buffered sodium citrate (9NC) 0.109 mol/L: 3.2 W/V%; two 3.5 mL vacuum tubes with clot activator and gel separator; and two 3.0 mL vacuum tubes containing 5.9 mg K(2)EDTA (Terumo Europe, Belgium). Immediately after the venipuncture all vacuum tubes (each of one additive type) were processed through two different procedures: i) Standard: blood specimens in K(2)EDTA- or sodium citrate-vacuum tubes were gently inverted five times whereas the specimens in tubes with clot activator and gel separator were gently inverted ten times, as recommended by the manufacturer; ii) Vigorous mix: all blood specimens were shaken up vigorously during 3-5s independently of the additive type inside the tubes. The significance of the differences between samples was assessed by Student's t-test or Wilcoxon ranked-pairs test after checking for normality. The level of statistical significance was set at P<0.05. No significant difference (P<0.05) was detected between the procedures for all tested parameters. Surprisingly only a visual alteration (presence of foam on the top) was shown by all the tubes mixed vigorously before centrifugation (Fig. 1 A, B and C). Moreover the serum tubes from vigorous mixing procedure shows a "blood ring" on the tube top after stopper removal (Fig. 1 D). Our results drop out a paradigm suggesting that the incorrect primary blood tubes mixing promotes laboratory variability. We suggest that similar evaluation should be done using other brands of vacuum tubes by each laboratory manager. Copyright © 2012 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Watershed Scale Stable Isotope Distribution and Implications on Soil Organic Carbon Loss Monitoring under Hydrologic Uncertainty

NASA Astrophysics Data System (ADS)

Ahmed, I.; Karim, A.; Boutton, T. W.; Strom, K.; Fox, J.

2013-12-01

The thematic focus of this 3-year period multidisciplinary USDA-CBG collaborative applied research is integrated monitoring of soil organic carbon (SOC) loss from multi-use lands using state-of-the-art stable isotope science under uncertain hydrologic influences. In this study, SOC loss and water runoff are being monitored on a 150 square kilometer watershed in Houston, Texas, using natural rainfall events, and total organic carbon/nitrogen concentration (TOC/TN) and stable isotope ratio (δ13C, δ15N) measurements with different land-use types. The work presents the interdisciplinary research results to uncover statistically valid and scientifically sound ways to monitor SOC loss by (i) application of Bayesian Markov Chain Monte Carlo statistical models to assess the relationship between rainfall-runoff and SOC release during soil erosion in space and time, (ii) capturing the episodic nature of rainfall events and its role in the spatial distribution of SOC loss from water erosion, (iii) stable isotope composition guided fingerprinting (source and quantity) of SOC by considering various types of erosion processes common in a heterogeneous watershed, to be able to tell what percentage of SOC is lost from various land-use types (Fox and Papanicolaou, 2008), (iv) creating an integrated watershed scale statistical soil loss monitoring model driven by spatial and temporal correlation of flow and stable isotope composition (Ahmed et. al., 2013a,b), and (v) creation of an integrated decision support system (DSS) for sustainable management of SOC under hydrologic uncertainty to assist the end users. References: Ahmed, I., Karim, A., Boutton, T.W., and Strom, K.B. (2013a). 'Monitoring Soil Organic Carbon Loss from Erosion Using Stable Isotopes.' Proc., Soil Carbon Sequestration, International Conference, May 26-29, Reykjavik, Iceland. Ahmed, I, Bouttom, T.W., Strom, K. B., Karim, A., and Irvin-Smith, N. (2013b). 'Soil carbon distribution and loss monitoring in the urbanized Buffalo Bayou watershed, Houston, Texas.' Proc., 4th Annual All Investigators Meeting of the North American Carbon Program, February 4-7, Albuquerque, NM. Fox, J.F. and Papanicolaou, A.N. (2008). An un-mixing model to study watershed erosion processes. Advances in Water Resources, 31, 96-108. ______________________________ * Corresponding author';s e-mail: ifahmed@pvamu.edu

Optimizing ACS NSQIP modeling for evaluation of surgical quality and risk: patient risk adjustment, procedure mix adjustment, shrinkage adjustment, and surgical focus.

PubMed

Cohen, Mark E; Ko, Clifford Y; Bilimoria, Karl Y; Zhou, Lynn; Huffman, Kristopher; Wang, Xue; Liu, Yaoming; Kraemer, Kari; Meng, Xiangju; Merkow, Ryan; Chow, Warren; Matel, Brian; Richards, Karen; Hart, Amy J; Dimick, Justin B; Hall, Bruce L

2013-08-01

The American College of Surgeons National Surgical Quality Improvement Program (ACS NSQIP) collects detailed clinical data from participating hospitals using standardized data definitions, analyzes these data, and provides participating hospitals with reports that permit risk-adjusted comparisons with a surgical quality standard. Since its inception, the ACS NSQIP has worked to refine surgical outcomes measurements and enhance statistical methods to improve the reliability and validity of this hospital profiling. From an original focus on controlling for between-hospital differences in patient risk factors with logistic regression, ACS NSQIP has added a variable to better adjust for the complexity and risk profile of surgical procedures (procedure mix adjustment) and stabilized estimates derived from small samples by using a hierarchical model with shrinkage adjustment. New models have been developed focusing on specific surgical procedures (eg, "Procedure Targeted" models), which provide opportunities to incorporate indication and other procedure-specific variables and outcomes to improve risk adjustment. In addition, comparative benchmark reports given to participating hospitals have been expanded considerably to allow more detailed evaluations of performance. Finally, procedures have been developed to estimate surgical risk for individual patients. This article describes the development of, and justification for, these new statistical methods and reporting strategies in ACS NSQIP. Copyright © 2013 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Techniques for mining truck data to improve freight operations and planning.

DOT National Transportation Integrated Search

2006-05-01

Freight plays an increasingly valuable role in the national economy, and a growing percentage of : freight measured by both total volume and market value - is being moved along the highway : system by truck. An important part of the research proc...

Movement of Dislocations in Quartz

DTIC Science & Technology

1992-04-01

which N mdislocations are possible, it is essentially a static process. * * Pontikise recently made the point that computer molecular dynamics (MD...34 Proc. 38th ASFC pp. 42-49, 1984. [46] Vassilis Pontikis , "Defect Dynamics Revealed," Physics World, pp. 25-28, 1990. 9

Photonic Crystals on the Wing

DTIC Science & Technology

2011-11-01

Giraldo MA Stavenga DG (2007) Sexual dichroism and pigment localization in the wing scales of Pieris rapae butterflies. Proc R Soc B 274:97-102 4...723 41. Stavenga DG, Arikawa K (2011) Photoreceptor spectral sensitivities of the Small White butterfly Pieris rapae crucivora interpreted with

CHLOROLYSIS APPLIED TO THE CONVERSION OF CHLOROCARBON RESIDUES

EPA Science Inventory

This program was initiated with the objective of determining the technical feasibility and economic viability of eliminating, within the United States, the discharge of large quantities of chlorocarbon residues which are harmful to the environment through the use of a German proc...

Uncooled Tunable LWIR Microbolometer

DTIC Science & Technology

2010-05-05

switches [19], micromirrors in projection displays [20], and tunable thermal detectors [21, 22], etc. In all these devices, contact must be achieved...Failure Mechanisms of the Digital Micromirror Device (DMD)”, Proc. 36th Annual Intl. Reliability Physics Symposium, Reno, NV, pp. 9-16, 1998. [33

75 FR 21253 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-23

... Processing (In/Out Proc): Soldiers' personal cell phone number, home telephone number, personal e-mail address, mailing/home address, emergency contact, mother's maiden name, spouse information, and child information. Transition Processing (TRANSPROC): Soldiers' personal cell phone number, home telephone number...

Engineering Bony Hybrid Organs In Vitro

DTIC Science & Technology

2006-11-01

microfluidic cell culture system using elastomeric channels and Braille displays (Gu et al., 2004; Futai et al., 2004). We have now further developed this...Takayama S, 2004: Computerized microfluidic cell culture using elastomeric channels and braille displays. Proc. Natl. Acad. Sci. USA 101, 15861-15866

Active Touch Sensing

DTIC Science & Technology

1981-04-01

Marvin Minsky . -36- 1. Broit, M. The Utilization of" an "Artificial Skin" sensor for the Identification of Solid Objects. Proc. 9th lnL Symp. on...Dertouzos, Ed Hardebeck, Henry Minsky , Margaret Minsky , Lisa Schostakovich, Laurel Simmons, Latanya Sweeney. Patrick Winston and most importantly

The Biological Control of Alligatorweed

DTIC Science & Technology

1975-03-01

andersoni, a new genus and species Injurious to alUgatorweed. Proc. Entomol. Soc. Wash. 70: 175-83. Pastrana, J. A. 1961. Una nueva Phycitidae...Lep.J paraslto de la lagunllla. Tech. Pub. 71, Secretaria de Estado de Agriculturay Ganaderia de la Nation, Instituto Naclonal de Tecnologia

Robust Fixed-Structure Control

DTIC Science & Technology

1994-10-30

Deterministic Foundation for Statistical Energy Analysis ," J. Sound Vibr., to appear. 1.96 D. S. Bernstein and S. P. Bhat, "Lyapunov Stability, Semistability...S. Bernstein, "Power Flow, Energy Balance, and Statistical Energy Analysis for Large Scale, Interconnected Systems," Proc. Amer. Contr. Conf., pp

A post-GWAS confirming the SCD gene associated with milk medium- and long-chain unsaturated fatty acids in Chinese Holstein population.

PubMed

Li, C; Sun, D; Zhang, S; Liu, L; Alim, M A; Zhang, Q

2016-08-01

The stearoyl-CoA desaturase (delta-9-desaturase) gene encodes a key enzyme in the cellular biosynthesis of monounsaturated fatty acids. In our initial genome-wide association study (GWAS) of Chinese Holstein cows, 19 SNPs fell in a 1.8-Mb region (20.3-22.1 Mb) on chromosome 26 underlying the SCD gene and were highly significantly associated with C14:1 or C14 index. The aims of this study were to verify whether the SCD gene has significant genetic effects on milk fatty acid composition in dairy cattle. By resequencing the entire coding region of the bovine SCD gene, a total of six variations were identified, including three coding variations (g.10153G>A, g.10213T>C and g.10329C>T) and three intronic variations (g.6926A>G, g.8646G>A and g.16158G>C). The SNP in exon 3, g.10329C>T, was predicted to result in an amino acid replacement from alanine (GCG) to valine (GTG) in the SCD protein. An association study for 16 milk fatty acids using 346 Chinese Holstein cows with accurate phenotypes and genotypes was performed using the mixed animal model with the proc mixed procedure in sas 9.2. All six detected SNPs were revealed to be associated with six medium- and long-chain unsaturated fatty acids (P = 0.0457 to P < 0.0001), specifically for C14:1 and C14 index (P = 0.0005 to P < 0.0001). Subsequently, strong linkage disequilibrium (D' = 0.88-1.00) was observed among all six SNPs in SCD and the five SNPs (rs41623887, rs109923480, rs42090224, rs42092174 and rs42091426) within the 1.8-Mb region identified in our previous GWAS, indicating that the significant association of the SCD gene with milk fatty acid content traits reduced the observed significant 1.8-Mb chromosome region in GWAS. Haplotype-based analysis revealed significant associations of the haplotypes encompassing the six SCD SNPs and one SNP (rs109923480) in a GWAS with C14:1, C14 index, C16:1 and C16 index (P = 0.0011 to P < 0.0001). In summary, our findings provide replicate evidence for our previous GWAS and demonstrate that variants in the SCD gene are significantly associated with milk fatty acid composition in dairy cattle, which provides clear evidence for an increased understanding of milk fatty acid synthesis and enhances opportunities to improve milk-fat composition in dairy cattle. © 2016 Stichting International Foundation for Animal Genetics.

A laboratory investigation of mixing dynamics between biofuels and surface waters

NASA Astrophysics Data System (ADS)

Wang, Xiaoxiang; Cotel, Aline

2017-11-01

Recently, production and usage of ethanol-blend fuels or biofuels have increased dramatically along with increasing risk of spilling into surface waters. Lack of understanding of the environmental impacts and absence of standard clean-up procedures make it crucial to study the mixing behavior between biofuels and water. Biofuels are represented by a solution of ethanol and glycol. A Plexiglas tank in conjunction with a wave generator is used to simulate the mixing of surface waters and biofuels under different natural conditions. In our previous experiments, two distinct mixing regimes were observed. One regime was driven by turbulence and the other by interfacial instabilities. However, under more realistic situations, without wind driven waves, only the first mixing regime was found. After one minute of rapid turbulent mixing, biofuels and water were fully mixed and no interface was formed. During the mixing process, chemical reactions happened simultaneously and influenced mixing dynamics. Current experiments are investigating the effect of waves on the mixing dynamics. Support from NSF CBET 1335878.

Procedural Portfolio Planning in Plastic Surgery, Part 2: Collaboration Between Surgeons and Hospital Administrators to Develop a Funds Flow Model for Procedures Performed at an Academic Medical Center.

PubMed

Hultman, Charles Scott

2016-06-01

Although plastic surgeons make important contributions to the clinical, educational, and research missions of academic medical centers (AMCs), determining the financial value of a plastic surgery service can be difficult, due to complex cost accounting systems. We analyzed the financial impact of plastic surgery on an AMC, by examining the contribution margins and operating income of surgical procedures. We collaborated with hospital administrators to implement 3 types of strategic changes: (1) growth of areas with high contribution margin, (2) curtailment of high-risk procedures with negative contribution margin, (3) improved efficiency of mission-critical services with high resource consumption. Outcome measures included: facility charges, hospital collections, contribution margin, operating margin, and operating room times. We also studied the top 50 Current Procedural Terminology codes (total case number × charge/case), ranking procedures for profitability, as determined by operating margin. During the 2-year study period, we had no turnover in faculty; did not pursue any formal marketing; did not change our surgical fees, billing system, or payer mix; and maintained our commitment to indigent care. After rebalancing our case mix, through procedural portfolio planning, average hospital operating income/procedure increased from $-79 to $+816. Volume and diversity of cases increased, with no change in payer mix. Although charges/case decreased, both contribution margin and operating margin increased, due to improved throughput and decreased operating room times. The 5 most profitable procedures for the hospital were hernia repair, mandibular osteotomy, hand skin graft, free fibula flap, and head and neck flap, whereas the 5 least profitable were latissimus breast reconstruction, craniosynostosis repair, free-flap breast reconstruction, trunk skin graft, and cutaneous free flap. Total operating income for the hospital, from plastic surgery procedures, increased from $-115,103 to $+1,277,040, of which $350,000 (25%) was returned to the practice plan as enterprise funds to support program development. Through focused strategic initiatives, plastic surgeons and hospital administrators can work together to unlock the latent value of a plastic surgery service to an AMC. Specific financial benefits to the hospital include increased contribution margin and operating income, the latter of which can be reinvested in the plastic surgery service through a gain-sharing model.

Analyzing longitudinal data with the linear mixed models procedure in SPSS.

PubMed

West, Brady T

2009-09-01

Many applied researchers analyzing longitudinal data share a common misconception: that specialized statistical software is necessary to fit hierarchical linear models (also known as linear mixed models [LMMs], or multilevel models) to longitudinal data sets. Although several specialized statistical software programs of high quality are available that allow researchers to fit these models to longitudinal data sets (e.g., HLM), rapid advances in general purpose statistical software packages have recently enabled analysts to fit these same models when using preferred packages that also enable other more common analyses. One of these general purpose statistical packages is SPSS, which includes a very flexible and powerful procedure for fitting LMMs to longitudinal data sets with continuous outcomes. This article aims to present readers with a practical discussion of how to analyze longitudinal data using the LMMs procedure in the SPSS statistical software package.

Advantages from Mixed Storage of Ammunition

DTIC Science & Technology

1983-07-01

A^dN^MM ADy^->6y 7<^ TECHNICAL REPORT ARBRL-TR-02506 ADVANTAGES FROM MIXED STORAGE OF AMMUNITION Ona R. Lyman July 1983 US ARMY ARMAMENT...that "weigh out." Benefits can be derived from mixing an ammunition that "weighs out" with ammunition that "cubes out." In principle, it is...accessible. Below is listed a step-by-step procedure for determining benefits to be derived. Step 1. Select a munition that "weighs out" and note if more

Objective vs. Subjective Evaluation of Cognitive Performance During 0.4-MPa Dives Breathing Air or Nitrox.

PubMed

Germonpré, Peter; Balestra, Costantino; Hemelryck, Walter; Buzzacott, Peter; Lafère, Pierre

2017-05-01

Divers try to limit risks associated with their sport, for instance by breathing enriched air nitrox (EANx) instead of air. This double blinded, randomized trial was designed to see if the use of EANx could effectively improve cognitive performance while diving. Eight volunteers performed two no-decompression dry dives breathing air or EANx for 20 min at 0.4 MPa. Cognitive functions were assessed with a computerized test battery, including MathProc and Ptrail. Measurements were taken before the dive, upon arrival and after 15 min at depth, upon surfacing, and at 30 min postdive. After each dive subjects were asked to identify the gas they had just breathed. Identification of the breathing gas was not possible on subjective assessment alone, while cognitive assessments showed significantly better performance while breathing EANx. Before the dives, breathing air, mean time to complete the task was 1795 ms for MathProc and 1905 ms for Ptrail. When arriving at depth MathProc took 1616 ms on air and 1523 ms on EANx, and Ptrail took 1318 ms on air and and 1356 ms on EANx, followed 15 min later by significant performance inhibition while breathing air during the ascent and the postdive phase, supporting the concept of late dive/postdive impairment. The results suggest that EANx could protect against decreased neuro-cognitive performance induced by inert gas narcosis. It was not possible for blinded divers to identify which gas they were breathing and differences in postdive fatigue between air and EANx diving deserve further investigation.Germonpré P, Balestra C, Hemelryck W, Buzzacott P, Lafère P. Objective vs. subjective evaluation of cognitive performance during 0.4-MPa dives breathing air or nitrox. Aerosp Med Hum Perform. 2017; 88(5):469-475.

The clinical presentation and genotype of protein C deficiency with double mutations of the protein C gene.

PubMed

Inoue, Hirofumi; Terachi, Shin-Ichi; Uchiumi, Takeshi; Sato, Tetsuji; Urata, Michiyo; Ishimura, Masataka; Koga, Yui; Hotta, Taeko; Hara, Toshiro; Kang, Dongchon; Ohga, Shouichi

2017-07-01

Severe protein C (PC) deficiency is a rare heritable thrombophilia leading to thromboembolic events during the neonatal period. It remains unclear how individuals with complete PC gene (PROC) defects develop or escape neonatal stroke or purpura fulminans (PF). We studied the onset of disease and the genotype of 22 PC-deficient patients with double mutations in PROC based on our cohort (n = 12) and the previous reports (n = 10) in Japan. Twenty-two patients in 20 unrelated families had 4 homozygous and 18 compound heterozygous mutations. Sixteen newborns presented with PF (n = 11, 69%), intracranial thromboembolism and hemorrhage (n = 13, 81%), or both (n = 8, 50%), with most showing a plasma PC activity of <10%. Six others first developed overt thromboembolism when they were over 15 years of age, showing a median PC activity of 31% (range: 19-52%). Fifteen of the 22 patients (68%) had the five major mutations (G423VfsX82, V339M, R211W, M406I, and F181V) or two others (E68K and K193del) that have been reported in Japan. Three of the six late-onset cases, but none of the 16 neonatal cases, had the K193del mutation, which has been reported to be the most common variant of Chinese thrombophilia. A novel mutation of A309V was determined in a family of two patients with late onset. The genotype of double-PROC mutants might show less diversity than heterozygous mutants in terms of the timing of the onset of thrombophilia (newborn onset or late onset). © 2017 Wiley Periodicals, Inc.

Discharges with surgical procedures performed less often than once per month per hospital account for two-thirds of hospital costs of inpatient surgery.

PubMed

O'Neill, Liam; Dexter, Franklin; Park, Sae-Hwan; Epstein, Richard H

2017-09-01

Most surgical discharges (54%) at the average hospital are for procedures performed no more often than once per month at that hospital. We hypothesized that such uncommon procedures would be associated with an even greater percentage of the total cost of performing all surgical procedures at that hospital. Observational study. State of Texas hospital discharge abstract data: 4th quarter of 2015 and 1st quarter of 2016. Inpatients discharged with a major therapeutic ("operative") procedure. For each of N=343 hospitals, counts of discharges, sums of lengths of stay (LOS), sums of diagnosis related group (DRG) case-mix weights, and sums of charges were obtained for each procedure or combination of procedures, classified by International Classification of Diseases version 10 Procedure Coding System (ICD-10-PCS). Each discharge was classified into 2 categories, uncommon versus not, defined as a procedure performed at most once per month versus those performed more often than once per month. Major procedures performed at most once per month per hospital accounted for an average among hospitals of 68% of the total inpatient costs associated with all major therapeutic procedures. On average, the percentage of total costs associated with uncommon procedures was 26% greater than expected based on their share of total discharges (P<0.00001). Average percentage differences were insensitive to the endpoint, with similar results for the percentage of patient days and percentage of DRG case-mix weights. Approximately 2/3rd (mean 68%) of inpatient costs among surgical patients can be attributed to procedures performed at most once per month per hospital. The finding that such uncommon procedures account for a large percentage of costs is important because methods of cost accounting by procedure are generally unsuitable for them. Copyright © 2017 Elsevier Inc. All rights reserved.

Differentiated Financing of Schools in French-Speaking Belgium: Prospectives for Regulating a School Quasi-Market

ERIC Educational Resources Information Center

Demeuse, Marc; Derobertmasure, Antoine; Friant, Nathanael

2010-01-01

The school quasi-market in French-speaking Belgium is characterised by segregation. Efforts to apply measures that encourage greater social mixing have met with stiff resistance. In 2008 and 2009, turbulence was caused by the application of the "social mixing" law influencing the registration procedures. The purpose of this article is to…

A Generalized Deduction of the Ideal-Solution Model

ERIC Educational Resources Information Center

Leo, Teresa J.; Perez-del-Notario, Pedro; Raso, Miguel A.

2006-01-01

A new general procedure for deriving the Gibbs energy of mixing is developed through general thermodynamic considerations, and the ideal-solution model is obtained as a special particular case of the general one. The deduction of the Gibbs energy of mixing for the ideal-solution model is a rational one and viewed suitable for advanced students who…

A New Item Selection Procedure for Mixed Item Type in Computerized Classification Testing.

ERIC Educational Resources Information Center

Lau, C. Allen; Wang, Tianyou

This paper proposes a new Information-Time index as the basis for item selection in computerized classification testing (CCT) and investigates how this new item selection algorithm can help improve test efficiency for item pools with mixed item types. It also investigates how practical constraints such as item exposure rate control, test…

The Virginia method of determining the cement content of freshly mixed cement-soil mixtures : a manual prepared for the use of the Virginia Dept. of Highways.

DOT National Transportation Integrated Search

1971-01-01

This manual describes a new method developed by the author, based on ASTM Method D2901, for determining the cement content of freshly mixed soil cement. The manual contains information on apparatus, reagents, procedures, source of equipment and reage...

Quantitative Determination of Citric and Ascorbic Acid in Powdered Drink Mixes

ERIC Educational Resources Information Center

Sigmann, Samuella B.; Wheeler, Dale E.

2004-01-01

A procedure by which the reactions are used to quantitatively determine the amount of total acid, the amount of total ascorbic acid and the amount of citric acid in a given sample of powdered drink mix, are described. A safe, reliable and low-cost quantitative method to analyze consumer product for acid content is provided.

A Hybrid Numerical Method for Turbulent Mixing Layers. Degree awarded by Case Western Reserve Univ.

NASA Technical Reports Server (NTRS)

Georgiadis, Nicholas J.

2001-01-01

A hybrid method has been developed for simulations of compressible turbulent mixing layers. Such mixing layers dominate the flows in exhaust systems of modern day aircraft and also those of hypersonic vehicles currently under development. The method configurations in which a dominant structural feature provides an unsteady mechanism to drive the turbulent development in the mixing layer. The hybrid method uses a Reynolds-averaged Navier-Stokes (RANS) procedure to calculate wall bounded regions entering a mixing section, and a Large Eddy Simulation (LES) procedure to calculate the mixing dominated regions. A numerical technique was developed to enable the use of the hybrid RANS-LES method on stretched, non-Cartesian grids. Closure for the RANS equations was obtained using the Cebeci-Smith algebraic turbulence model in conjunction with the wall-function approach of Ota and Goldberg. The wall-function approach enabled a continuous computational grid from the RANS regions to the LES region. The LES equations were closed using the Smagorinsky subgrid scale model. The hybrid RANS-LES method is applied to a benchmark compressible mixing layer experiment. Preliminary two dimensional calculations are used to investigate the effects of axial grid density and boundary conditions. Vortex shedding from the base region of a splitter plate separating the upstream flows was observed to eventually transition to turbulence. The location of the transition, however, was much further downstream than indicated by experiments. Actual LES calculations, performed in three spatial directions, also indicated vortex shedding, but the transition to turbulence was found to occur much closer to the beginning of the mixing section. which is in agreement with experimental observations. These calculations demonstrated that LES simulations must be performed in three dimensions. Comparisons of time-averaged axial velocities and turbulence intensities indicated reasonable agreement with experimental data.

A Computational Analysis of Complex Noun Phrases in Navy Messages

DTIC Science & Technology

1984-07-01

Hirschman. Automated Determination of Suhlanguage Syntactic Usage. Proc. COLING 84) (current volume). [Hirschman 1082 ] Hirsehman, L. Constraints on...Restricted Semantic Domains. de Grnyter New York, 1082 . [Levi 1078] Levi, J.N. The Syntaz and Semantics of Com- plez Nominals, Academic Press, New York

Poetic inquiry as a research and engagement method in natural resource science

USDA-ARS?s Scientific Manuscript database

Complex and “wicked” natural resource issues often require interdisciplinary or transdisciplinary research approaches—that is, methods that span boundaries among physical, natural and social sciences, and, increasingly, the humanities, and that engage multiple sectors of society in the research proc...

The nature of context-sensitive solutions, stakeholder involvement and critical issues in the urban context.

DOT National Transportation Integrated Search

2011-12-01

Over the last several decades many transportation and planning agencies have experienced conflicting demands emerging from the need to develop projects in an expeditious manner while at the same time involving stakeholders in the decision-making proc...

Optimal Allocation of Sampling Effort in Depletion Surveys

EPA Science Inventory

We consider the problem of designing a depletion or removal survey as part of estimating animal abundance for populations with imperfect capture or detection rates. In a depletion survey, animals are captured from a given area, counted, and withheld from the population. This proc...

Overview of a Hybrid Underwater Camera System

DTIC Science & Technology

2014-07-01

meters), in increments of 200ps. The camera is also equipped with 6:1 motorized zoom lens. A precision miniature attitude, heading reference system ( AHRS ...LUCIE Control & Power Distribution System AHRS Pulsed LASER Gated Camera -^ Sonar Transducer (b) LUCIE sub-systems Proc. ofSPIEVol. 9111

Neuronal models for evaluation of proliferation in vitro using high content screening

EPA Science Inventory

In vitro test methods can provide a rapid approach for the screening of large numbers of chemicals for their potential to produce toxicity (hazard identification). In order to identify potential developmental neurotoxicants, a battery of in vitro tests for neurodevelopmental proc...

U.S. EPA, Pesticide Product Label, , 04/02/1982

EPA Pesticide Factsheets

2011-04-13

... (~ .. t. , ... Do ret ~p'~ """ w ,pt"¥'Ii cl ,"1, pro.;!~C' i'" Cf'l'\\dv'h "'O'Ot ""ev,'r::l' It"'c'!o" al'ld , .... ... foy":->Q,.t .. t"r ., ,t." ~ ",otc" 0" p'I,I~9 •• ,te"'" In '''f' ...

Design Methodology for Multiple Microcomputer Architectures.

DTIC Science & Technology

1982-07-01

multimicro design knowledge is true both in industry and in university environments. In the industrial environment, it reduces productivity and increases...Real-Time Processor Problems," Proc. of ELECTRO-81 Tercer Seminario de Ingenieria Electronica, Nov. 9-13, 1981. 14 1981 "D Flip/Flop Substracts

COLLABORATIVE RESEARCH, MONITORING AND ASSESSMENT IN THE MID-ATLANTIC REGION

EPA Science Inventory

EPA Region 3 to implement a long-term research, monitoring, and assessment program in the Mid-Atlantic region - the Mid-Atlantic Integrated Assessment (MAIA). The MAIA mission is to develop a broad-based partnership to integrate scientific knowledge into the decision-making proc...

Design Principles and Guidelines for Security

DTIC Science & Technology

2007-11-21

Padula , Secure Computer Systems: Unified Exposition and Multics Interpretation. Electronic Systems Division, USAF. ESD-TR-75-306, MTR-2997 Rev.1...Hanscom AFB, MA. March 1976 [7] David Elliott Bell. “Looking Back at the Bell-La Padula Model,” Proc. Annual Computer Security Applications Conference

3 CFR 8876 - Proclamation 8876 of October 1, 2012. National Disability Employment Awareness Month, 2012

Code of Federal Regulations, 2013 CFR

2013-01-01

... Disability Employment Awareness Month, 2012 8876 Proclamation 8876 Presidential Documents Proclamations Proclamation 8876 of October 1, 2012 Proc. 8876 National Disability Employment Awareness Month, 2012By the... opportunity. During National Disability Employment Awareness Month, we recognize the indispensable...

CAPSULE REPORT: REVERSE OSMOSIS PROCESS

EPA Science Inventory

A failure analysis has been completed for the reverse osmosis (RO) process. The focus was on process failures that result in releases of liquids and vapors to the environment. The report includes the following: 1) A description of RO and coverage of the principles behind the proc...

A Survey of Statistical Machine Translation

DTIC Science & Technology

2007-04-01

methods are notoriously sen- sitive to domain differences, however, so the move to informal text is likely to present many interesting challenges ...Och, Christoph Tillman, and Hermann Ney. Improved alignment models for statistical machine translation. In Proc. of EMNLP- VLC , pages 20–28, Jun 1999

Advanced Optical Technologies for Defense Trauma and Critical Care

DTIC Science & Technology

2014-02-04

conventional LSI. We also demonstrated that mcLSI enables improved characterization of curved surfaces of the body by positioning LSI modules at...Implementation of an LED based clinical spatial frequency domain imaging 17 system. Proc SPIE Vol. 8254, Emerging Digital Micromirror Device Based

Distributed Estimation using Bayesian Consensus Filtering

DTIC Science & Technology

2014-06-06

Convergence rate analysis of distributed gossip (linear parameter) estimation: Fundamental limits and tradeoffs,” IEEE J. Sel. Topics Signal Process...Dimakis, S. Kar, J. Moura, M. Rabbat, and A. Scaglione, “ Gossip algorithms for distributed signal processing,” Proc. of the IEEE, vol. 98, no. 11, pp

Estimation of Electron Bernstein Emission in the TJ-II Stellarator

NASA Astrophysics Data System (ADS)

García-Rega\\ Na, J. M.; Cappa, A.; Castejón, F.; Tereshchenko, M.

2009-05-01

In order to study experimentally the viability of first harmonic EBW heating in the TJ-II stellarator by means of the O-X-B tecnique [1], an EBE diagnostic was recently installed [2]. In the present work a theoretical estimation of the EBW radiation in the TJ-II plasmas have been carried out making use of the ray tracing code TRUBA [3]. The line of sight of the EBE diagnostic may be modified using an internal movable mirror and therefore, for comparison with the experimental results, the theoretical O-X-B emission window has been determined. Experimental density and temperature profiles obtained in NBI discharges are considered in the simulations.References:[1] F. Castejon et al, Nucl. Fusion 48, 075011 (2008).[2] J. Caughman et al, Proc. 15th Joint Workshop on ECE and ECRH, Yosemite, USA (2008).[3] M. A. Tereshchenko et. al, Proc. 30th EPS Conference on Contr. Fusion and Plasma Phys., 27A, P-1.18 (2003).

The chimeric VirA-tar receptor protein is locked into a highly responsive state.

PubMed Central

Turk, S C; van Lange, R P; Sonneveld, E; Hooykaas, P J

1993-01-01

The wild-type VirA protein is known to be responsive not only to phenolic compounds but also to sugars via the ChvE protein (G. A. Cangelosi, R. G. Ankenbauer, and E. W. Nester, Proc. Natl. Acad. Sci. USA 87:6708-6712, 1990, and N. Shimoda, A. Toyoda-Yamamoto, J. Nagamine, S. Usami, M. Katayama, Y. Sakagami, and Y. Machida, Proc. Natl. Acad. Sci. USA 87:6684-6688, 1990). It is shown here that the mutant VirA(Ser-44, Arg-45) protein and the chimeric VirA-Tar protein are no longer responsive to sugars and the ChvE protein. However, whereas the chimeric VirA-Tar protein was found to be locked in a highly responsive state, the VirA(Ser-44, Arg-45) mutant protein appeared to be locked in a low responsive state. This difference turned out to be important for tumorigenicity of the host strains in virulence assays on Kalanchoë daigremontiana. Images PMID:8366057

Implementation of a Self-Management System for Students with Disabilities in General Education Settings

ERIC Educational Resources Information Center

Schulze, Margaret A.

2016-01-01

Despite the fact that self-management procedures have a robust literature base attesting to their efficacy with students with disabilities, the use of these strategies in general education settings remains limited. This mixed methods study examined the implementation of self-management procedures using both quantitative and qualitative methods.…

Comparison of Two Procedures for Analyzing Small Sets of Repeated Measures Data

ERIC Educational Resources Information Center

Vallejo, Guillermo; Livacic-Rojas, Pablo

2005-01-01

This article compares two methods for analyzing small sets of repeated measures data under normal and non-normal heteroscedastic conditions: a mixed model approach with the Kenward-Roger correction and a multivariate extension of the modified Brown-Forsythe (BF) test. These procedures differ in their assumptions about the covariance structure of…

The Misconceptions of Abuse by School Personnel: A Public School Perspective

ERIC Educational Resources Information Center

Starling, Kathleen

2011-01-01

The purpose of this study was to determine the effectiveness of school personnel's perceptions, their need to examine their sexual abuse polices procedures, provide appropriate training to allocate those policies and procedures to all stakeholders in their educational school setting. A mixed methods study was used to explore the hypothesis and…

Spectral Upscaling for Graph Laplacian Problems with Application to Reservoir Simulation

DOE PAGES

Barker, Andrew T.; Lee, Chak S.; Vassilevski, Panayot S.

2017-10-26

Here, we consider coarsening procedures for graph Laplacian problems written in a mixed saddle-point form. In that form, in addition to the original (vertex) degrees of freedom (dofs), we also have edge degrees of freedom. We extend previously developed aggregation-based coarsening procedures applied to both sets of dofs to now allow more than one coarse vertex dof per aggregate. Those dofs are selected as certain eigenvectors of local graph Laplacians associated with each aggregate. Additionally, we coarsen the edge dofs by using traces of the discrete gradients of the already constructed coarse vertex dofs. These traces are defined on themore » interface edges that connect any two adjacent aggregates. The overall procedure is a modification of the spectral upscaling procedure developed in for the mixed finite element discretization of diffusion type PDEs which has the important property of maintaining inf-sup stability on coarse levels and having provable approximation properties. We consider applications to partitioning a general graph and to a finite volume discretization interpreted as a graph Laplacian, developing consistent and accurate coarse-scale models of a fine-scale problem.« less

The computation of standard solar models

NASA Technical Reports Server (NTRS)

Ulrich, Roger K.; Cox, Arthur N.

1991-01-01

Procedures for calculating standard solar models with the usual simplifying approximations of spherical symmetry, no mixing except in the surface convection zone, no mass loss or gain during the solar lifetime, and no separation of elements by diffusion are described. The standard network of nuclear reactions among the light elements is discussed including rates, energy production and abundance changes. Several of the equation of state and opacity formulations required for the basic equations of mass, momentum and energy conservation are presented. The usual mixing-length convection theory is used for these results. Numerical procedures for calculating the solar evolution, and current evolution and oscillation frequency results for the present sun by some recent authors are given.

Color-rendering indices in global illumination methods

NASA Astrophysics Data System (ADS)

Geisler-Moroder, David; Dür, Arne

2009-10-01

Human perception of material colors depends heavily on the nature of the light sources that are used for illumination. One and the same object can cause highly different color impressions when lit by a vapor lamp or by daylight, respectively. On the basis of state-of-the-art colorimetric methods, we present a modern approach for the calculation of color-rendering indices (CRI), which were defined by the International Commission on Illumination (CIE) to characterize color reproduction properties of illuminants. We update the standard CIE method in three main points: first, we use the CIELAB color space; second, we apply a linearized Bradford transformation for chromatic adaptation; and finally, we evaluate color differences using the CIEDE2000 total color difference formula. Moreover, within a real-world scene, light incident on a measurement surface is composed of a direct and an indirect part. Neumann and Schanda [Proc. CGIV'06 Conf., Leeds, UK, pp. 283-286 (2006)] have shown for the cube model that diffuse interreflections can influence the CRI of a light source. We analyze how color-rendering indices vary in a real-world scene with mixed direct and indirect illumination and recommend the usage of a spectral rendering engine instead of an RGB-based renderer for reasons of accuracy of CRI calculations.

On the Multilevel Nature of Meta-Analysis: A Tutorial, Comparison of Software Programs, and Discussion of Analytic Choices.

PubMed

Pastor, Dena A; Lazowski, Rory A

2018-01-01

The term "multilevel meta-analysis" is encountered not only in applied research studies, but in multilevel resources comparing traditional meta-analysis to multilevel meta-analysis. In this tutorial, we argue that the term "multilevel meta-analysis" is redundant since all meta-analysis can be formulated as a special kind of multilevel model. To clarify the multilevel nature of meta-analysis the four standard meta-analytic models are presented using multilevel equations and fit to an example data set using four software programs: two specific to meta-analysis (metafor in R and SPSS macros) and two specific to multilevel modeling (PROC MIXED in SAS and HLM). The same parameter estimates are obtained across programs underscoring that all meta-analyses are multilevel in nature. Despite the equivalent results, not all software programs are alike and differences are noted in the output provided and estimators available. This tutorial also recasts distinctions made in the literature between traditional and multilevel meta-analysis as differences between meta-analytic choices, not between meta-analytic models, and provides guidance to inform choices in estimators, significance tests, moderator analyses, and modeling sequence. The extent to which the software programs allow flexibility with respect to these decisions is noted, with metafor emerging as the most favorable program reviewed.

Rigorous theory of molecular orientational nonlinear optics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kwak, Chong Hoon, E-mail: chkwak@ynu.ac.kr; Kim, Gun Yeup

2015-01-15

Classical statistical mechanics of the molecular optics theory proposed by Buckingham [A. D. Buckingham and J. A. Pople, Proc. Phys. Soc. A 68, 905 (1955)] has been extended to describe the field induced molecular orientational polarization effects on nonlinear optics. In this paper, we present the generalized molecular orientational nonlinear optical processes (MONLO) through the calculation of the classical orientational averaging using the Boltzmann type time-averaged orientational interaction energy in the randomly oriented molecular system under the influence of applied electric fields. The focal points of the calculation are (1) the derivation of rigorous tensorial components of the effective molecularmore » hyperpolarizabilities, (2) the molecular orientational polarizations and the electronic polarizations including the well-known third-order dc polarization, dc electric field induced Kerr effect (dc Kerr effect), optical Kerr effect (OKE), dc electric field induced second harmonic generation (EFISH), degenerate four wave mixing (DFWM) and third harmonic generation (THG). We also present some of the new predictive MONLO processes. For second-order MONLO, second-order optical rectification (SOR), Pockels effect and difference frequency generation (DFG) are described in terms of the anisotropic coefficients of first hyperpolarizability. And, for third-order MONLO, third-order optical rectification (TOR), dc electric field induced difference frequency generation (EFIDFG) and pump-probe transmission are presented.« less

Ultralow Energy Electron Attachment at Sub-Millielectron Volt Resolution

NASA Astrophysics Data System (ADS)

Chutjian, Ara

1999-10-01

The technique of rare-gas photoionization(J. M. Ajello and A. Chutjian, J. Chem. Phys. 65), 5524 (1976). has been extended(A. Kortyna, M. Darrach and A. Chutjian, Bull. Am. Phys. Soc. 43), 1336 (1998). by use of direct laser ionization to electron energies ɛ in the range 0-100 meV, with a resolution Δɛ of 0.4-0.5 meV (FWHM). Tunable UV light at λ276 nm is produced using a pulsed Nd:YAG laser and nonlinear mixing techniques. The beam is frequency tripled in a pulsed jet of xenon. The VUV radiation, tunable at λ92 nm, is then used to photoionize Xe at its ^2P_1/2 threshold (single-photon ionization). The photoelectrons produced interact with admixed target gas to generate negative ions through the s-wave capture process. Recent results in electron attachment to SF6 will be reported which show resonance structure at the opening of the ground-state vibrational channels.^3,(H. Hotop et al., AIP Conf. Proc. Ser. 360 (AIP, New York, 1995), and private communication.) This structure corresponds to the process of vibrational excitation + attachment, which is superimposed on the underlying s-wave (direct) capture process. It should be a general phenomenon, present in a wide variety of zero-energy electron attaching molecules.

IRIS Toxicological Review of Dichloromethane (Methylene Chloride) (Interagency Science Discussion Draft)

EPA Science Inventory

EPA is releasing the draft report, Toxicological Review of Dichloromethane, that was distributed to Federal agencies and White House Offices for comment during the Science Discussion step of the IRIS Assessment Development Proc...

Platelet Function in Basset Hound Hereditary Thrombopathy.

DTIC Science & Technology

1986-01-01

4021, 1975. 20. DZANDU, J.K., DEH, M.E., BARRETT, D.L., AND WISE, G.E. Detec- tion of erythrocyte membrane proteins, sialoproteins , and lipids in the...Wise GE. Detection of erythrocyte membrane proteins, sialoproteins , and lipids in the same polyacrylamide gel using a double staining technique. Proc

IRIS Toxicological Review of Tetrahydrofuran (THF) (Interagency Science Discussion Draft)

EPA Science Inventory

EPA is releasing the draft report, Toxicological Review of Tetrahydrofuran, that was distributed to Federal agencies and White House Offices for comment during the Science Discussion step of the IRIS Assessment Development Proc...

Multi-Conjugate Adaptive Optics Test-bed for Horizontal Propagation

DTIC Science & Technology

2009-09-01

Optical Applications of Liquid Crystals”, L. Vicari Editor, I.O.P. press Bristol and Philadelphia (2005) [4] Brusa, G., A. Riccardi , V. Biliotti, C...Wilcox, F . Santiago, R. Romeo, R. Martin, “Ultra-lightweight telescope coupled with portable AO system for laser communications applications,” Proc

On the Geometry of Visual Correspondence

DTIC Science & Technology

1994-07-01

from point and line matches. In Proc. International Conference on Computer Vision, pages 25-34, 1987. [11] 0. Faugeras and S. Maybank . Motion from...image. Proceed- ings of the Royal Society, London B, 208:385-397, 1980. (23] S. Maybank . Theory of Reconstruction from Image Motion. Springer, Berlin

The nature of context-sensitive solutions, stakeholder involvement and critical issues in the urban context : [research brief].

DOT National Transportation Integrated Search

2011-12-01

Over the last several decades many transportation and planning agencies have experienced conflicting demands emerging from the need to develop projects in an expeditious manner while at the same time involving stakeholders in the decision-making proc...

Towards an Analytic Foundation for Network Architecture

DTIC Science & Technology

2010-12-31

SUPPLEMENTARY NOTES N/A 14. ABSTRACT In this project, we develop the analytic tools of stochastic optimization for wireless network design and apply them...and Mung Chiang, “ DaVinci : Dynamically Adaptive Virtual Networks for a Customized Internet,” in Proc. ACM SIGCOMM CoNext Conference, December 2008

LearnAlaska Portal

Science.gov Websites

ESS (Employee Self Service) E-Travel Online Login IRIS FIN/PROC Login IRIS HRM Login LearnAlaska SFOA SharePoint Site TRIPS (Traveler Integrated Profile System) Vendor Self Service (VSS) Resources Alaska & Resources Manuals Payment Detail Report Salary Schedules SFOA SharePoint Site (SOA Only) Training

Vaccination of High-Risk Breast Cancer Patients with Carbohydrate Mimicking Peptides

DTIC Science & Technology

2007-05-01

and Wheat germ Agglutin (WGA) while mimotope 106 only reacts with WGA. These lectins see terminal monosaccharides . To demonstrate that autoimmunity...Westerink MAJ, Giardina PC, Apicella MA, Kieber-Emmons T. Pep- tide mimicry of the meningococcal group C capsular polysaccharide . Proc Natl Acad Sci

Infrared Stereo Calibration for Unmanned Ground Vehicle Navigation

DTIC Science & Technology

2014-05-01

Josh Harguess: E -mail: joshua.harguess@navy.mil, Telephone: 1 619 553 0777 SPIE Proc. 9084: Unmanned Systems Technology XVI, Baltimore, MD, May 6-8...G., Diniz , H., Silvino, S., and de Andrade, R., “Thermal/visible au- tonomous stereo visio system calibration methodology for non-controlled

Subsite binding energies of an exo-polygalacturonase using isothermal titration calorimetry

USDA-ARS?s Scientific Manuscript database

Thermodynamic parameters for binding of a series of galacturonic acid oligomers to an exo-polygalacturonase, RPG16 from Rhizopus oryzae, were determined by isothermal titration calorimetry. Binding of oligomers varying in chain length from two to five galacturonic acid residues is an exothermic proc...

Detoxication of Mycotoxins and Other Toxins and Compounds of Military Interest

DTIC Science & Technology

1987-01-14

is glutathione monoethyl aster (-" glutamylcysteinylglycyl ethyl ester) (8,10,11). In this research, prw-drugs of cysteine. other thiols. and glutat ...The unroacted glutatione was removed by filtration and the glutathione mojoethyl eotei: sulfat was procLpiated by addition of cold diethyl ether

Job Skills Workshop: Finding Employment in Environmental Toxicology and Chemistry

EPA Science Inventory

A “practical short course” designed to aid students with the process of career job hunting and will be taught by SETAC members. Applying, interviewing, and approaching a job is challenging and one of most important in career planning. The application, interview and selection proc...

Modern Prediction Methods for Turbomachine Performance

DTIC Science & Technology

1976-01-01

easier on the basis of C factor correlation. Generally, correlation has to be carefully established; statistical methods may be of good help when a , large...FLOW TURBOMACHINE BLADES Walker, G. J. Instn of Engrs,, Australia-3rd Australiasian Conference on Hydraulics 8 Fluid Mechanics-Proc, Nov 25-29 1968

Functional Electrical Therapy Systems: Neuroprostheses for Life-Like Reach and Grasp

DTIC Science & Technology

2001-10-25

communication channel by means of an infrared link. Keywords – Neuroprosthesis, therapy, reaching, grasping I. INTRODUCTION Functional electrical...present technology and the next generation. Proc 2nd Int Symp IFESS, Burnaby, pp 139-140, 1997. [7] Ocadiz G, Mayagoitia RE. Programmable eight channel

Genetics Home Reference: carbonic anhydrase VA deficiency

MedlinePlus

... implicates both enzymes in ammonia detoxification and glucose metabolism. Proc Natl Acad Sci U S A. 2013 Apr 30;110(18):7423-8. doi: 10.1073/pnas.1305805110. Epub 2013 Apr 15. Citation on PubMed or Free article on PubMed Central Sly WS, Hu PY. Human ...

Managing summertime off-flavors in catfish

USDA-ARS?s Scientific Manuscript database

Summertime phytoplankton blooms in channel catfish ponds often contain blue-green algae that produce musty or earthy odors. The odorous compounds are absorbed by fish across their gills and deposited in fatty tissues, giving fish undesirable “off-flavors.” When fish are declared off-flavored by proc...

Foundations of Nuclear Geophysics

NASA Astrophysics Data System (ADS)

Herndon, J. M.; Hollenbach, D. F.

2002-05-01

Herndon suggested that the inner core of the Earth consists, not of partially crystallized iron metal, but of nickel silicide. He has shown by fundamental mass ratios that i) the Earth as a whole, especially the inner 82%, has a state of oxidation like primitive enstatite chondrites, and ii) the lower mantle and core are similar in composition to the Abee enstatite chondrite. By analogy with Abee data, CaS and MgS precipitates from the core are expected to collect at the core-mantle boundary and, significantly, a major fraction of the actinides are expected to precipitate from the core and to collect at the center of the Earth. Herndon demonstrated the feasibility of a nuclear fission reactor at the center of the Earth as the energy source for the geomagnetic field and described a natural mechanism that would lead to variations in energy production and thus variations in the geomagnetic field. Hollenbach and Herndon produced numerical simulations of the operation of the geo-reactor over the lifetime of the Earth using the state-of-the-art, validated, industry standard SCALE code package developed at Oak Ridge National Laboratory. The results clearly demonstrate that such a geo-reactor would i) function as a fast-neutron breeder reactor; ii) under appropriate conditions, operate over the entire period of geologic time; iii) function in such a manner as to yield variable and/or intermittent output; iv) generate energy at levels in the range generally accepted by the geophysics community; and, v) produce He-3 and He-4 in ratios that are in the range observed from deep-mantle sources. Deep-source He-3, the authors submit, is evidence of in-core sustained nuclear fission, rather than the out-gassing of primordial He-3; which in turn is evidence of large amounts of uranium residing in the Earth's core; which in turn is evidence that the core has a state of oxidation like the corresponding matter in primitive enstatite chondrites. The factors affecting He-3/He-4 ratios, their causes and implications, will be discussed in the presentation. Also, the current state of investigations into additional deep-Earth nuclear fission signatures will be presented. References: J. M. Herndon, Proc. R. Roc. London, Ser. A, 368 (1979) 495; J. Geomagn. Geoelectr. 45 (1993) 423; Proc. R. Soc. London, Ser. A, 445 (1994) 453; Proc. Nat. Acad. Sci. (USA) 93 (1996) 646. Hollenbach, D. F. and J. M. Herndon, Proc. Nat. Acad. Sci. (USA) 98 (2001) 11085.

[Complications after procedure for prolapse and hemorrhoids for circular hemorrhoids].

PubMed

Zhu, Jun; Ding, Jian-hua; Zhao, Ke; Zhang, Bin; Zhao, Yong; Tang, Hai-yan; Zhao, Yu-juan

2012-12-01

To investigate the perioperative and postoperative long-term complications of procedure for prolapse and hemorrhoids(PPH) for the treatment of circular internal hemorrhoids and circular mixed hemorrhoids. A retrospective study was performed in 2152 patients with circular internal hemorrhoids and circular mixed hemorrhoids eligible for PPH from January 2002 to December 2011. The perioperative and postoperative long-term complications were recorded and assessed. The median length of follow-up was 73 months. Perioperative complications and adverse events were reported including acute urinary retention(n=360, 16.7%) which was managed by temporary cathether indwelling, anastomotic bleeding(n=45, 2.1%) managed by surgical or endoscopic procedures, chronic anoperineal sustained pain(n=30, 1.4%) managed by local treatment or stapler removal, and thrombosed external hemorrhoid(n=28, 1.2%) managed by conservative treatment or resection. Long-term postoperative complications were reported including mild fecal incontinence(n=112, 6.3%), postoperative recurrence(n=82, 4.6%), anal distention and defecatory urgency(n=50, 2.8%), anastomotic stenosis(n=4, 0.2%). Postoperative recurrence developed in 82 patients(4.6%), 28 of whom were managed by repeat PPH and 54 by conservative treatment. PPH appears to be a safe technique for patients with circular internal hemorrhoids and circular mixed hemorrhoids.

Classification of longitudinal data through a semiparametric mixed-effects model based on lasso-type estimators.

PubMed

Arribas-Gil, Ana; De la Cruz, Rolando; Lebarbier, Emilie; Meza, Cristian

2015-06-01

We propose a classification method for longitudinal data. The Bayes classifier is classically used to determine a classification rule where the underlying density in each class needs to be well modeled and estimated. This work is motivated by a real dataset of hormone levels measured at the early stages of pregnancy that can be used to predict normal versus abnormal pregnancy outcomes. The proposed model, which is a semiparametric linear mixed-effects model (SLMM), is a particular case of the semiparametric nonlinear mixed-effects class of models (SNMM) in which finite dimensional (fixed effects and variance components) and infinite dimensional (an unknown function) parameters have to be estimated. In SNMM's maximum likelihood estimation is performed iteratively alternating parametric and nonparametric procedures. However, if one can make the assumption that the random effects and the unknown function interact in a linear way, more efficient estimation methods can be used. Our contribution is the proposal of a unified estimation procedure based on a penalized EM-type algorithm. The Expectation and Maximization steps are explicit. In this latter step, the unknown function is estimated in a nonparametric fashion using a lasso-type procedure. A simulation study and an application on real data are performed. © 2015, The International Biometric Society.

Mixed reality ventriculostomy simulation: experience in neurosurgical residency.

PubMed

Hooten, Kristopher G; Lister, J Richard; Lombard, Gwen; Lizdas, David E; Lampotang, Samsun; Rajon, Didier A; Bova, Frank; Murad, Gregory J A

2014-12-01

Medicine and surgery are turning toward simulation to improve on limited patient interaction during residency training. Many simulators today use virtual reality with augmented haptic feedback with little to no physical elements. In a collaborative effort, the University of Florida Department of Neurosurgery and the Center for Safety, Simulation & Advanced Learning Technologies created a novel "mixed" physical and virtual simulator to mimic the ventriculostomy procedure. The simulator contains all the physical components encountered for the procedure with superimposed 3-D virtual elements for the neuroanatomical structures. To introduce the ventriculostomy simulator and its validation as a necessary training tool in neurosurgical residency. We tested the simulator in more than 260 residents. An algorithm combining time and accuracy was used to grade performance. Voluntary postperformance surveys were used to evaluate the experience. Results demonstrate that more experienced residents have statistically significant better scores and completed the procedure in less time than inexperienced residents. Survey results revealed that most residents agreed that practice on the simulator would help with future ventriculostomies. This mixed reality simulator provides a real-life experience, and will be an instrumental tool in training the next generation of neurosurgeons. We have now implemented a standard where incoming residents must prove efficiency and skill on the simulator before their first interaction with a patient.

Photosynthetically active radiation measurements in pure pine and mixed pine forests in Poland

Treesearch

Jaroslaw Smialkowski

1998-01-01

Photosynthetically active radiation (PAR) has been measured in pure pine and mixed pine forests on 15 sites in two transects in Poland: the "climatic" (from the western to the eastern border), and the "Silesian" (from the most to the less polluted part of the country). PAR was measured by using the standard procedure developed by the USDA Forest...

Mixing Interviews and Rasch Modeling: Demonstrating a Procedure Used to Develop an Instrument That Measures Trust

ERIC Educational Resources Information Center

David, Shannon L.; Hitchcock, John H.; Ragan, Brian; Brooks, Gordon; Starkey, Chad

2018-01-01

Developing psychometrically sound instruments can be difficult, especially if little is known about the constructs of interest. When constructs of interest are unclear, a mixed methods approach can be useful. Qualitative inquiry can be used to explore a construct's meaning in a way that informs item writing and allows the strengths of one analysis…

Students' General Knowledge of the Learning Process: A Mixed Methods Study Illustrating Integrated Data Collection and Data Consolidation

ERIC Educational Resources Information Center

van Velzen, Joke H.

2018-01-01

There were two purposes for this mixed methods study: to investigate (a) the realistic meaning of awareness and understanding as the underlying constructs of general knowledge of the learning process and (b) a procedure for data consolidation. The participants were 11th-grade high school and first-year university students. Integrated data…

RCRA Refresher Self-Study, Course 28582

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, Lewis Edward

Federal and state regulations require hazardous and mixed waste facility workers at treatment and storage facilities (TSFs) and <90-day accumulation areas to be trained in hazardous and mixed waste management. This course will refamiliarize and update <90-day accumulation area workers, TSF workers, and supervisors of TSF workers regarding waste identification, pollution prevention, storage area requirements, emergency response procedures, and record-keeping requirements.

RCRA Personnel Training, Course 7488

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simpson, Lewis Edward

Federal and state regulations require hazardous and mixed waste facility workers at treatment and storage facilities (TSFs) and <90-day accumulation areas to be trained in hazardous and mixed waste management. This course will refamiliarize and update <90-day accumulation area workers, TSF workers, and supervisors of TSF workers regarding waste identification, pollution prevention, storage area requirements, emergency response procedures, and record-keeping requirements.

A Comparison of Item Fit Statistics for Mixed IRT Models

ERIC Educational Resources Information Center

Chon, Kyong Hee; Lee, Won-Chan; Dunbar, Stephen B.

2010-01-01

In this study we examined procedures for assessing model-data fit of item response theory (IRT) models for mixed format data. The model fit indices used in this study include PARSCALE's G[superscript 2], Orlando and Thissen's S-X[superscript 2] and S-G[superscript 2], and Stone's chi[superscript 2*] and G[superscript 2*]. To investigate the…

Mixed-Mode Bending Method for Delamination Testing

NASA Technical Reports Server (NTRS)

Reeder, James R.; Crews, John R., Jr.

1990-01-01

A mixed mode delamination test procedure was developed combining double cantilever beam (DCB) mode I loading and end-notch fixture (ENF) mode II loading on a split unidirectional laminate. By loading with a lever, a single applied load simultaneously produces mode I and mode II bending loads on the specimen. This mixed-mode bending (MMB) test was analyzed using both finite-element procedures and beam theory to calculate the mode I and mode II components of strain-energy release rate G(sub I) and G(sub II), respectively. A wide range of G(sub I)/G(sub II) ratios can be produced by varying the load position on the lever. As the delamination extended, the G(sub I)/G(sub II) ratios varied by less than 5%. Beam theory equations agreed closely with the finite-element results and provide a basis for selection of G(sub I)/G(sub II) test ratios and a basis for computing the mode I and mode II components of measured delamination toughness. The MMB test was demonstrated using AS4/PEEK (APC2) unidirectional laminates. The MMB test introduced in this paper is rather simple and is believed to offer several advantages over most current mixed-mode test.

Manure sampling procedures and nutrient estimation by the hydrometer method for gestation pigs.

PubMed

Zhu, Jun; Ndegwa, Pius M; Zhang, Zhijian

2004-05-01

Three manure agitation procedures were examined in this study (vertical mixing, horizontal mixing, and no mixing) to determine the efficacy of producing a representative manure sample. The total solids content for manure from gestation pigs was found to be well correlated with the total nitrogen (TN) and total phosphorus (TP) concentrations in the manure, with highly significant correlation coefficients of 0.988 and 0.994, respectively. Linear correlations were observed between the TN and TP contents and the manure specific gravity (correlation coefficients: 0.991 and 0.987, respectively). Therefore, it may be inferred that the nutrients in pig manure can be estimated with reasonable accuracy by measuring the liquid manure specific gravity. A rapid testing method for manure nutrient contents (TN and TP) using a soil hydrometer was also evaluated. The results showed that the estimating error increased from +/-10% to +/-30% with the decrease in TN (from 1000 to 100 ppm) and TP (from 700 to 50 ppm) concentrations in the manure. Data also showed that the hydrometer readings had to be taken within 10 s after mixing to avoid reading drift in specific gravity due to the settling of manure solids.

Endoscopic Histologic Mapping of a Mixed Germ Pineal Tumor.

PubMed

Velásquez, Carlos; Rivero-Garvía, Mónica; Rivas, Eloy; Cañizares, María de Los Angeles; Mayorga-Buiza, María José; Márquez-Rivas, Javier

2016-11-01

The accurate histologic diagnosis of germ cell tumors in the pineal region is a keystone for determining the best treatment strategy and prognosis. This situation poses a challenge for the neuropathologist, considering the lack of a standarized procedure to obtain biopsy samples, which results in few and small specimens, which are not suitable for diagnosis. We report a case in which a pineal region mixed germ cell tumor was accurately diagnosed by performing histologic mapping through a dual burr-hole endoscopic approach. The technical pitfalls and other considerations necessary for obtaining an accurate diagnosis in this tumor subgroup are specified. In addition, the histologic analysis regarding the sampling technique used is described. The supraorbital frontal endoscopic approach enables the surgeon to perform histologic mapping of pineal region tumors, allowing standarization of the procedure used to obtain the specimens. This approach could result in a more accurate diagnosis, especially in mixed germ cell neoplasms. Copyright © 2016 Elsevier Inc. All rights reserved.

High speed jet noise research at NASA Lewis

NASA Astrophysics Data System (ADS)

Krejsa, Eugene A.; Cooper, B. A.; Kim, C. M.; Khavaran, Abbas

1992-04-01

The source noise portion of the High Speed Research Program at NASA LeRC is focused on jet noise reduction. A number of jet noise reduction concepts are being investigated. These include two concepts, the Pratt & Whitney ejector suppressor nozzle and the General Electric (GE) 2D-CD mixer ejector nozzle, that rely on ejectors to entrain significant amounts of ambient air to mix with the engine exhaust to reduce the final exhaust velocity. Another concept, the GE 'Flade Nozzle' uses fan bypass air at takeoff to reduce the mixed exhaust velocity and to create a fluid shield around a mixer suppressor. Additional concepts are being investigated at Georgia Tech Research Institute and at NASA LeRC. These will be discussed in more detail in later figures. Analytical methods for jet noise prediction are also being developed. Efforts in this area include upgrades to the GE MGB jet mixing noise prediction procedure, evaluation of shock noise prediction procedures, and efforts to predict jet noise directly from the unsteady Navier-Stokes equation.

High speed jet noise research at NASA Lewis

NASA Technical Reports Server (NTRS)

Krejsa, Eugene A.; Cooper, B. A.; Kim, C. M.; Khavaran, Abbas

1992-01-01

The source noise portion of the High Speed Research Program at NASA LeRC is focused on jet noise reduction. A number of jet noise reduction concepts are being investigated. These include two concepts, the Pratt & Whitney ejector suppressor nozzle and the General Electric (GE) 2D-CD mixer ejector nozzle, that rely on ejectors to entrain significant amounts of ambient air to mix with the engine exhaust to reduce the final exhaust velocity. Another concept, the GE 'Flade Nozzle' uses fan bypass air at takeoff to reduce the mixed exhaust velocity and to create a fluid shield around a mixer suppressor. Additional concepts are being investigated at Georgia Tech Research Institute and at NASA LeRC. These will be discussed in more detail in later figures. Analytical methods for jet noise prediction are also being developed. Efforts in this area include upgrades to the GE MGB jet mixing noise prediction procedure, evaluation of shock noise prediction procedures, and efforts to predict jet noise directly from the unsteady Navier-Stokes equation.

Correlation between the Hurst exponent and the maximal Lyapunov exponent: Examining some low-dimensional conservative maps

NASA Astrophysics Data System (ADS)

Tarnopolski, Mariusz

2018-01-01

The Chirikov standard map and the 2D Froeschlé map are investigated. A few thousand values of the Hurst exponent (HE) and the maximal Lyapunov exponent (mLE) are plotted in a mixed space of the nonlinear parameter versus the initial condition. Both characteristic exponents reveal remarkably similar structures in this space. A tight correlation between the HEs and mLEs is found, with the Spearman rank ρ = 0 . 83 and ρ = 0 . 75 for the Chirikov and 2D Froeschlé maps, respectively. Based on this relation, a machine learning (ML) procedure, using the nearest neighbor algorithm, is performed to reproduce the HE distribution based on the mLE distribution alone. A few thousand HE and mLE values from the mixed spaces were used for training, and then using 2 - 2 . 4 × 105 mLEs, the HEs were retrieved. The ML procedure allowed to reproduce the structure of the mixed spaces in great detail.

75 FR 37311 - Airplane and Engine Certification Requirements in Supercooled Large Drop, Mixed Phase, and Ice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-29

... maximum time interval between any engine run-ups from idle and the minimum ambient temperature associated with that run-up interval. This limitation is necessary because we do not currently have any specific requirements for run-up procedures for engine ground operation in icing conditions. The engine run-up procedure...

An Empirical Investigation of Methods for Assessing Item Fit for Mixed Format Tests

ERIC Educational Resources Information Center

Chon, Kyong Hee; Lee, Won-Chan; Ansley, Timothy N.

2013-01-01

Empirical information regarding performance of model-fit procedures has been a persistent need in measurement practice. Statistical procedures for evaluating item fit were applied to real test examples that consist of both dichotomously and polytomously scored items. The item fit statistics used in this study included the PARSCALE's G[squared],…

Voice-onset time and buzz-onset time identification: A ROC analysis

NASA Astrophysics Data System (ADS)

Lopez-Bascuas, Luis E.; Rosner, Burton S.; Garcia-Albea, Jose E.

2004-05-01

Previous studies have employed signal detection theory to analyze data from speech and nonspeech experiments. Typically, signal distributions were assumed to be Gaussian. Schouten and van Hessen [J. Acoust. Soc. Am. 104, 2980-2990 (1998)] explicitly tested this assumption for an intensity continuum and a speech continuum. They measured response distributions directly and, assuming an interval scale, concluded that the Gaussian assumption held for both continua. However, Pastore and Macmillan [J. Acoust. Soc. Am. 111, 2432 (2002)] applied ROC analysis to Schouten and van Hessen's data, assuming only an ordinal scale. Their ROC curves suppported the Gaussian assumption for the nonspeech signals only. Previously, Lopez-Bascuas [Proc. Audit. Bas. Speech Percept., 158-161 (1997)] found evidence with a rating scale procedure that the Gaussian model was inadequate for a voice-onset time continuum but not for a noise-buzz continuum. Both continua contained ten stimuli with asynchronies ranging from -35 ms to +55 ms. ROC curves (double-probability plots) are now reported for each pair of adjacent stimuli on the two continua. Both speech and nonspeech ROCs often appeared nonlinear, indicating non-Gaussian signal distributions under the usual zero-variance assumption for response criteria.

Primer-independent RNA sequencing with bacteriophage phi6 RNA polymerase and chain terminators.

PubMed

Makeyev, E V; Bamford, D H

2001-05-01

Here we propose a new general method for directly determining RNA sequence based on the use of the RNA-dependent RNA polymerase from bacteriophage phi6 and the chain terminators (RdRP sequencing). The following properties of the polymerase render it appropriate for this application: (1) the phi6 polymerase can replicate a number of single-stranded RNA templates in vitro. (2) In contrast to the primer-dependent DNA polymerases utilized in the sequencing procedure by Sanger et al. (Proc Natl Acad Sci USA, 1977, 74:5463-5467), it initiates nascent strand synthesis without a primer, starting the polymerization on the very 3'-terminus of the template. (3) The polymerase can incorporate chain-terminating nucleotide analogs into the nascent RNA chain to produce a set of base-specific termination products. Consequently, 3' proximal or even complete sequence of many target RNA molecules can be rapidly deduced without prior sequence information. The new technique proved useful for sequencing several synthetic ssRNA templates. Furthermore, using genomic segments of the bluetongue virus we show that RdRP sequencing can also be applied to naturally occurring dsRNA templates. This suggests possible uses of the method in the RNA virus research and diagnostics.

3 CFR 8607 - Proclamation 8607 of November 30, 2010. Critical Infrastructure Protection Month, 2010

Code of Federal Regulations, 2011 CFR

2011-01-01

..., which will make our physical and cyber infrastructure more resilient. Working together, we can raise... Infrastructure Protection Month, 2010 8607 Proclamation 8607 Presidential Documents Proclamations Proclamation 8607 of November 30, 2010 Proc. 8607 Critical Infrastructure Protection Month, 2010By the President of...

Low Temperature, Chloroaluminate Thermal Cells.

DTIC Science & Technology

1981-11-01

Thermal Batteries ", AFWAL-TR-81-2044, Aeropropulsion Laboratory, Wright-Patterson AFB, OH, June 1981. 5. J. C. Nardi, J. K. Erbacher, C. L. Hussey, and L...R. L. Vaughn, L. A. King, Proc. of the 29th Power Sources Symp, The Electrochemical Society, Princeton, NJ, June 1980. 4. D. M. Ryan, " Advanced

75 FR 66104 - Government-Owned Inventions; Availability for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-27

... receptor gene exhibit impaired growth and resistance to thyroid hormone. Proc Natl Acad Sci U S A. 2000 Nov... overactivated. These mice have a knock-in dominantly negative mutant thyroid hormone receptor [beta] gene (TR... mutation in the thyroid hormone receptor beta gene spontaneously develop thyroid carcinoma: a mouse model...

Decompression Theory.

DTIC Science & Technology

1980-06-25

vessel- rich group, a vessel-poor group, a fatty group, and so on ( Papper and Kitz 1963). Behnke’s original suggestion, put forth in the first...An examination of the critical released volume concept in decom- pression sickness. Proc. Roy. Soc. Lond. B. 197:299-313, 1977. Papper , E.M., and R.J

Bovine rumen metagenomics – moving beyond microbial diversity

USDA-ARS?s Scientific Manuscript database

The rumen is a large bioreactor that enables dairy cattle to derive nutrition from otherwise inedible plant polymers and compounds. Despite the direct contribution of the rumen’s microbial community toward the nutrition of the dairy cow, only a general knowledge has been gained of the metabolic proc...

3 CFR 8591 - Proclamation 8591 of October 29, 2010. National Alzheimer's Disease Awareness Month, 2010

Code of Federal Regulations, 2011 CFR

2011-01-01

... Alzheimer's Disease Awareness Month, 2010 8591 Proclamation 8591 Presidential Documents Proclamations Proclamation 8591 of October 29, 2010 Proc. 8591 National Alzheimer's Disease Awareness Month, 2010By the President of the United States of America A Proclamation Alzheimer’s disease tragically robs individuals of...

Understanding Thermal Equilibrium through Activities

ERIC Educational Resources Information Center

Pathare, Shirish; Huli, Saurabhee; Nachane, Madhura; Ladage, Savita; Pradhan, Hemachandra

2015-01-01

Thermal equilibrium is a basic concept in thermodynamics. In India, this concept is generally introduced at the first year of undergraduate education in physics and chemistry. In our earlier studies (Pathare and Pradhan 2011 "Proc. episteme-4 Int. Conf. to Review Research on Science Technology and Mathematics Education" pp 169-72) we…

23RD International Conference on Phenomena in Ionized Gases, Volume 2

DTIC Science & Technology

1998-12-01

able voltage arcs and thermoionic converters [10]. The news for subsequent evolution into a prebiotic structure, XXIII ICPIG (Toulouse, France ) 17...possibilities of a prebiotic [9]. M.Sanduloviciu, Proc XXII ICPIG New Jersey structure in the early Earth atmosphere (a plasma like 1995, Contr. Paper 1, p

77 FR 61474 - Proposed Information Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-09

... Election filed under I.R.C. 83(b). OMB Number: 1545-2018. Form Number: Rev. Proc. 2006-31. Abstract: This... burden, invites the general public and other Federal agencies to take this opportunity to comment on... continuing effort to reduce paperwork and respondent burden, invite the general public and other Federal...

Periscopic Spine Surgery

DTIC Science & Technology

2008-06-01

and H. Seraji , “Kinematic analysis of 7 DOF manipulators,” Int. Journal of Robotics Research, vol. 11, no. 5, pp. 469–481, 1992. [9] D. Lawrence...Force/torque Sensor Read joint Angle Forward kinematics Impedance controller Patient Fe Fs ix∆ Xd Xc diθ ciθ riθ P&O Proc. of SPIE Vol

SALT high resolution spectroscopy of GX339-4 in outburst

NASA Astrophysics Data System (ADS)

Buckley, D. A. H.; Aydi, E.; Kotze, M. M.; Gandhi, P.; Altamirano, D.; Charles, P. A.; Russell, D.

2017-10-01

High resolution (R = 15,000) spectroscopy of the current outbursting black hole transient GX339-4 (ATel #10797) was obtained with the SALT High Resolution Spectrograph (HRS; Crause et al. 2014, Proc SPIE, 91476) on 2017-09-29 starting at 17:28 UTC, during evening twilight.

Network Monitoring and Diagnosis Based on Available Bandwidth Measurement

DTIC Science & Technology

2006-05-01

Ganjam for helping me integrating the TAMI system with the ESM system, which becomes an important application of TAMI. I want to thank Ming Zhang, now...network monitoring. In Proc. ACM SIGCOMM, August 2004. [35] Yanghua Chu, Aditya Ganjam , T. S. Eugene Ng, Sanjay G. Rao, Kunwadee Sri- panidkulchai

Important Publications in the Area of Photovoltaic Performance |

Science.gov Websites

, 2011, DOI: 978-0-12-385934-1. Photoelectrochemical Water Splitting: Standards, Experimental Methods Energy Systems Testing, Solar Energy 73, 443-467 (2002). D.R. Myers, K. Emery, and C. Gueymard, Revising Performance Evaluation Methodologies for Energy Ratings," Proc. 24th IEEE Photovoltaic Specialists Conf

3 CFR 8448 - Proclamation 8448 of October 30, 2009. National Family Caregivers Month, 2009

Code of Federal Regulations, 2010 CFR

2010-01-01

... Family Caregivers Month, 2009 8448 Proclamation 8448 Presidential Documents Proclamations Proclamation 8448 of October 30, 2009 Proc. 8448 National Family Caregivers Month, 2009By the President of the... National Family Caregivers Month, we honor the individuals providing essential services to family members...

3 CFR 8897 - Proclamation 8897 of November 1, 2012. National Alzheimer's Disease Awareness Month, 2012

Code of Federal Regulations, 2013 CFR

2013-01-01

... Alzheimer's Disease Awareness Month, 2012 8897 Proclamation 8897 Presidential Documents Proclamations Proclamation 8897 of November 1, 2012 Proc. 8897 National Alzheimer's Disease Awareness Month, 2012By the... tragic realities of Alzheimer's disease—an irreversible, fatal illness that robs men and women of their...

QUALITY SCIENCE AND QUALITY ASSURANCE: OBSERVATIONS OR AN ENVIRONMENTAL SCIENTIST

EPA Science Inventory

--

ABSTRACT
The purpose of this manuscript is to examine the relationship between quality science (QS) and quality assurance (QA). Many research scientists definitely want to do QS, but are afraid or do not want to do QA because they are intimidated by the QA proc...

Hypoxia, Monitoring, and Mitigation System

DTIC Science & Technology

2015-08-01

Oxygen Saturation Measured via Pulse - Oximeter SRS Software Requirements Specification SW Software TI Texas Instruments uPROC Micro-Processor USAARL...Financial) Table of Figures Figure 1: Pulse OX custom module...Tasks 3, 4 and 5 have not been exercised. Sensor definition testing continued on the custom pulse -ox design. Additional refinement on the pulse

3 CFR 8408 - Proclamation 8408 of August 31, 2009. National Prostate Cancer Awareness Month, 2009

Code of Federal Regulations, 2010 CFR

2010-01-01

... Prostate Cancer Awareness Month, 2009 8408 Proclamation 8408 Presidential Documents Proclamations Proclamation 8408 of August 31, 2009 Proc. 8408 National Prostate Cancer Awareness Month, 2009By the President... fight against prostate cancer. Over the last decade, prostate cancer mortality rates have fallen...

3 CFR 9005 - Proclamation 9005 of August 30, 2013. National Alcohol and Drug Addiction Recovery Month, 2013

Code of Federal Regulations, 2014 CFR

2014-01-01

... Alcohol and Drug Addiction Recovery Month, 2013 9005 Proclamation 9005 Presidential Documents Proclamations Proclamation 9005 of August 30, 2013 Proc. 9005 National Alcohol and Drug Addiction Recovery Month... courageous steps toward recovery from alcohol and drug addiction. Their examples reveal the transformative...

Optoacoustic Spectroscopy to Detect Hydrazine Fuels.

DTIC Science & Technology

1981-07-01

signals in noise. Proc IEEE 58:610 (1970). 303. Rosen, H., A. D. Hansen, L. Gundel, and T. Novakov . Photoacoustic investigation of urban aerosol...Appl Phys 40:5404 (1969). 383. Yasa, Z., N. M. Amer, H. Rosen, A. D. Hansen, and T. Novakov . Photoacous- tic investigation of urban aerosol particles

Effect of infiltration modeling approach on operational solutions for furrow irrigation

USDA-ARS?s Scientific Manuscript database

Infiltration in irrigated furrows depends on the variation of depth of flow and, thus, wetted perimeter along the field and in time. However, the magnitude of the wetted perimeter effect has not been clearly established due to soil variability, erosion and deposition, macropore flow, and other proc...

The Use of Geometric Diversity for Spectral Dominance in Underground Imaging

DTIC Science & Technology

2009-01-01

Ferrara , Air Force Research Laboratory, Dr. F. Soldovieri, Consiglio Nazionale Ricerche, Italy , Prof. M. Cheney, Rensselaer Polytechnic Institute, for...Receiver Design for RF Geotomography,” IEEE Proc. RadarCon 2008, Rome, Italy , May 26-30, 2008. [11] L. Lo Monte, A. M. Bagci, D. Erricolo, and R. Ansari

The Multiplicative Zak Transform, Dimension Reduction, and Wavelet Analysis of LIDAR Data

DTIC Science & Technology

2010-01-01

systems is likely to fail. Auslander, Eichmann , Gertner, and Tolimieri defined a multiplicative Zak transform [1], mimicking the construction of the Gabor...L. Auslander, G. Eichmann , I. Gertner and R. Tolimieri, “Time-Frequency Analysis and Synthesis of Non-Stationary Signals,” Proc. Soc. Photo-Opt. In

LOD-Sprite Technique for Accelerated Terrain Rendering

DTIC Science & Technology

1999-01-01

includes limited parallax, is possible. Another category samples the full plenoptic function, resulting in 3D, 4D or even 5D image sprites [13, 10... Plenoptic modeling: An image- based rendering system. Computer Graphics (Proc. SIG- GRAPH ’95), pages 39–46, 1995. [19] P. Rademacher and G. Bishop

Computational Video for Collaborative Applications

DTIC Science & Technology

2003-03-01

Plenoptic Modeling: An Image- Based Rendering System.” SIGGRAPH 95, 39-46. [18] McMillan, L. An Image-Based Approach to Three-Dimensional Computer... Plenoptic modeling and rendering from image sequences taken by hand-held camera. Proc. DAGM 99, pages 94–101. [8] Y. Horry, K. Anjyo, and K. Arai

3 CFR 8838 - Proclamation 8838 of June 14, 2012. World Elder Abuse Awareness Day, 2012

Code of Federal Regulations, 2013 CFR

2013-01-01

... abuse cuts across race, gender, culture, and circumstance, and whether physical, emotional, or financial... Abuse Awareness Day, 2012 8838 Proclamation 8838 Presidential Documents Proclamations Proclamation 8838 of June 14, 2012 Proc. 8838 World Elder Abuse Awareness Day, 2012By the President of the United...

Multiphase Complete Exchange: A Theoretical Analysis

DTIC Science & Technology

1993-08-01

Birkhiuser, Boston, 1984. 24 [9] C-T. Ho and M. T. Raghunath . Efficient communication primitives on hy- percubes. In Proc. 6th. DMCC, pages 390-397...1991. [10] C-T. Ho and M. T. Raghunath . Efficient communication primitives on hy- percubes. Technical Report RJ 7932 (72915), IBM, T. J. Watson Center

On a question of Brown, Douglas, and Fillmore

NASA Astrophysics Data System (ADS)

Kim, Jaewoong; Lee, Woo Young

2007-12-01

In this note we answer an old question of Brown, Douglas, and Fillmore [L. Brown, R.G. Douglas, P. Fillmore, Unitary equivalence modulo the compact operators and extensions of C*-algebras, in: Proc. Conf. Operator Theory, in: Lecture Notes in Math., vol. 345, Springer, Berlin, 1973, pp. 58-128].

3 CFR 8556 - Proclamation 8556 of September 10, 2010. National Childhood Cancer Awareness Month, 2010

Code of Federal Regulations, 2011 CFR

2011-01-01

... Childhood Cancer Awareness Month, 2010 8556 Proclamation 8556 Presidential Documents Proclamations Proclamation 8556 of September 10, 2010 Proc. 8556 National Childhood Cancer Awareness Month, 2010By the... against cancer with inspiring hope and incredible bravery. When a child is diagnosed with cancer, an...

3 CFR 8551 - Proclamation 8551 of August 31, 2010. National Ovarian Cancer Awareness Month, 2010

Code of Federal Regulations, 2011 CFR

2011-01-01

... Ovarian Cancer Awareness Month, 2010 8551 Proclamation 8551 Presidential Documents Proclamations Proclamation 8551 of August 31, 2010 Proc. 8551 National Ovarian Cancer Awareness Month, 2010By the President... ovarian cancer, this disease continues to claim more lives than any other gynecologic cancer. During...