IERL-RTP PROCEDURES MANUAL: LEVEL 1 ENVIRONMENTAL ASSESSMENT BIOLOGICAL TESTS
The manual gives revised procedures for Level 1 environmental assessment biological tests, and supersedes the first edition, EPA-600/7-77-043 (NTIS No. PB 268484), published in April 1977. The revised biological procedures complement the Level 1 chemical and physical procedures p...
The computational structural mechanics testbed procedures manual
NASA Technical Reports Server (NTRS)
Stewart, Caroline B. (Compiler)
1991-01-01
The purpose of this manual is to document the standard high level command language procedures of the Computational Structural Mechanics (CSM) Testbed software system. A description of each procedure including its function, commands, data interface, and use is presented. This manual is designed to assist users in defining and using command procedures to perform structural analysis in the CSM Testbed User's Manual and the CSM Testbed Data Library Description.
Operating manual for the Bulk Shielding Reactor
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1983-04-01
The BSR is a pool-type reactor. It has the capabilities of continuous operation at a power level of 2 MW or at any desired lower power level. This manual presents descriptive and operational information. The reactor and its auxillary facilities are described from physical and operational viewpoints. Detailed operating procedures are included which are applicable from source-level startup to full-power operation. Also included are procedures relative to the safety of personnel and equipment in the areas of experiments, radiation and contamination control, emergency actions, and general safety. This manual supercedes all previous operating manuals for the BSR.
Operating manual for the Bulk Shielding Reactor
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1987-03-01
The BSR is a pool-type reactor. It has the capabilities of continuous operation at a power level of 2 MW or at any desired lower power level. This manual presents descriptive and operational information. The reactor and its auxiliary facilities are described from physical and operational viewpoints. Detailed operating procedures are included which are applicable from source-level startup to full-power operation. Also included are procedures relative to the safety of personnel and equipment in the areas of experiments, radiation and contamination control, emergency actions, and general safety. This manual supersedes all previous operating manuals for the BSR.
Battery Test Manual For Plug-In Hybrid Electric Vehicles
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jeffrey R. Belt
2010-09-01
This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Program. It is based on technical targets established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the proceduresmore » and supporting analysis, a revision including some modifications and clarifications of these procedures is expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices.« less
Battery Test Manual For Plug-In Hybrid Electric Vehicles
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jeffrey R. Belt
2010-12-01
This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Program. It is based on technical targets established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the proceduresmore » and supporting analysis, a revision including some modifications and clarifications of these procedures is expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices.« less
The NASTRAN theoretical manual (level 16.0)
NASA Technical Reports Server (NTRS)
1976-01-01
The manual is a commentary on the NASTRAN computer program, introducing the program to all interested persons. The manual's most important function is to present the developments of the analytical and numerical procedures that underlie the program. This manual is one of the four manuals which document the NASTRAN computer program.
Battery Test Manual For Electric Vehicles, Revision 3
DOE Office of Scientific and Technical Information (OSTI.GOV)
Christophersen, Jon P.
2015-06-01
This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office. It is based on technical targets for commercial viability established for energy storage development projects aimed at meeting system level DOE goals for Electric Vehicles (EV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for EVs. However, it does share some methods described in the previously published battery test manual for plug-in hybrid electric vehicles. Due to the complexity of some of themore » procedures and supporting analysis, future revisions including some modifications and clarifications of these procedures are expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices. The DOE-United States Advanced Battery Consortium (USABC), Technical Advisory Committee (TAC) supported the development of the manual. Technical Team points of contact responsible for its development and revision are Chul Bae of Ford Motor Company and Jon P. Christophersen of the Idaho National Laboratory. The development of this manual was funded by the Unites States Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office. Technical direction from DOE was provided by David Howell, Energy Storage R&D Manager and Hybrid Electric Systems Team Leader. Comments and questions regarding the manual should be directed to Jon P. Christophersen at the Idaho National Laboratory (jon.christophersen@inl.gov).« less
Matematiques: Niveau A (Mathematics: Level A).
ERIC Educational Resources Information Center
Duron, Dolores; And Others
A teacher's manual was developed for an elementary level mathematics course in French as part of an immersion program for English speaking children. The Level A manual is designed for kindergarten and grade 1 pupils. Teaching procedures, conceptual and language objectives, vocabulary, structures, and learning activities are included. Activities…
Matematicas: Nivel A (Mathematics: Level A).
ERIC Educational Resources Information Center
Duron, Dolores; And Others
A teacher's manual was developed for an elementary level mathematics course in Spanish as part of an immersion program for English speaking children. The Level A manual is designed for kindergarten and grade 1 pupils. Teaching procedures, conceptual objectives, vocabulary, and structures are included. Activities are designed to teach either…
Matematicas: Nivel E (Mathematics: Level E).
ERIC Educational Resources Information Center
Duron, Dolores, Ed.; And Others
A teacher's manual was developed for an elementary level mathematics course in Spanish as part of an immersion program for English speaking children. The Level E manual is designed for grade 4 pupils. Teaching procedures, conceptual and language objectives, vocabulary, structures, and learning activities are included. Activities are designed to…
Matematicas: Nivel F (Mathematics: Level F).
ERIC Educational Resources Information Center
Duron, Dolores, Ed.; And Others
A teacher's manual was developed for an elementary level mathematics course in Spanish as part of an immersion program for English speaking children. The Level F manual is designed for grade 5 pupils. Teaching procedures, conceptual and language objectives, vocabulary, structures, and learning activities are included. Activities are designed to…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Christophersen, Jon P.
2014-09-01
This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office. It is based on technical targets for commercial viability established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of somemore » of the procedures and supporting analysis, future revisions including some modifications and clarifications of these procedures are expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices. The DOE-United States Advanced Battery Consortium (USABC), Technical Advisory Committee (TAC) supported the development of the manual. Technical Team points of contact responsible for its development and revision are Renata M. Arsenault of Ford Motor Company and Jon P. Christophersen of the Idaho National Laboratory. The development of this manual was funded by the Unites States Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office. Technical direction from DOE was provided by David Howell, Energy Storage R&D Manager and Hybrid Electric Systems Team Leader. Comments and questions regarding the manual should be directed to Jon P. Christophersen at the Idaho National Laboratory (jon.christophersen@inl.gov).« less
ERIC Educational Resources Information Center
Earl, Lorna L.
This series of manuals describing and illustrating the Statistical Package for the Social Sciences (SPSS) was planned as a self-teaching instrument, beginning with the basics and progressing to an advanced level. Information on what the searcher must know to define the data and write a program for preliminary analysis is contained in manual 1,…
The NASTRAN User's Manual (Level 15)
NASA Technical Reports Server (NTRS)
Mccormick, C. W. (Editor)
1972-01-01
The User's manual for the NASA Structural Analysis (NASTRAN) program is presented. The manual contains all information needed to solve problems with NASTRAN. The volume is instructional and encyclopedic. The manual includes instruction in structural modeling techniques, instruction in input preparation, and information to assist the interpretation of the output. Descriptions of all input data cards, restart procedures, and diagnostic messages are developed.
Home - Virginia Department of Forensic Science
Procedure Manuals Training Manuals Digital & Multimedia Evidence Computer Analysis Video Analysis Procedure Manual Training Manual FAQ Updates Firearms & Toolmarks Procedure Manuals Training Manuals Forensic Biology Procedure Manuals Training Manuals Familial Searches Post-Conviction DNA Issues FAQ
Fisher, Beth E; Davenport, Todd E; Kulig, Kornelia; Wu, Allan D
2009-05-21
Many health care practitioners use a variety of hands-on treatments to improve symptoms and disablement in patients with musculoskeletal pathology.Research to date indirectly suggests a potentially broad effect of manual therapy on the neuromotor processing of functional behavior within the supraspinal central nervous system (CNS) in a manner that may be independent of modification at the level of local spinal circuits. However, the effect of treatment speed, as well as the specific mechanism and locus of CNS changes, remain unclear. We developed a placebo-controlled, randomized study to test the hypothesis that manual therapy procedures directed to the talocrural joint in individuals with post-acute ankle sprain induce a change in corticospinal excitability that is relevant to improve the performance of lower extremity functional behavior. This study is designed to identify potential neuromotor changes associated with manual therapy procedures directed to the appendicular skeleton, compare the relative effect of treatment speed on potential neuromotor effects of manual therapy procedures, and determine the behavioral relevance of potential neuromotor effects of manual therapy procedures. http://www.clinicaltrials.gov identifier NCT00847769.
Fisher, Beth E; Davenport, Todd E; Kulig, Kornelia; Wu, Allan D
2009-01-01
Background Many health care practitioners use a variety of hands-on treatments to improve symptoms and disablement in patients with musculoskeletal pathology. Research to date indirectly suggests a potentially broad effect of manual therapy on the neuromotor processing of functional behavior within the supraspinal central nervous system (CNS) in a manner that may be independent of modification at the level of local spinal circuits. However, the effect of treatment speed, as well as the specific mechanism and locus of CNS changes, remain unclear. Methods/Design We developed a placebo-controlled, randomized study to test the hypothesis that manual therapy procedures directed to the talocrural joint in individuals with post-acute ankle sprain induce a change in corticospinal excitability that is relevant to improve the performance of lower extremity functional behavior. Discussion This study is designed to identify potential neuromotor changes associated with manual therapy procedures directed to the appendicular skeleton, compare the relative effect of treatment speed on potential neuromotor effects of manual therapy procedures, and determine the behavioral relevance of potential neuromotor effects of manual therapy procedures. Trial Registration identifier NCT00847769. PMID:19460169
Manual sorting to eliminate aflatoxin from peanuts.
Galvez, F C F; Francisco, M L D L; Villarino, B J; Lustre, A O; Resurreccion, A V A
2003-10-01
A manual sorting procedure was developed to eliminate aflatoxin contamination from peanuts. The efficiency of the sorting process in eliminating aflatoxin-contaminated kernels from lots of raw peanuts was verified. The blanching of 20 kg of peanuts at 140 degrees C for 25 min in preheated roasters facilitated the manual sorting of aflatoxin-contaminated kernels after deskinning. The manual sorting of raw materials with initially high aflatoxin contents (300 ppb) resulted in aflatoxin-free peanuts (i.e., peanuts in which no aflatoxin was detected). Verification procedures showed that the sorted sound peanuts contained no aflatoxin or contained low levels (<15 ppb) of aflatoxin. The results obtained confirmed that the sorting process was effective in separating contaminated peanuts whether or nor contamination was extensive. At the commercial level, when roasters were not preheated, the dry blanching of 50 kg of peanuts for 45 to 55 min facilitated the proper deskinning and subsequent manual sorting of aflatoxin-contaminated peanut kernels from sound kernels.
Escobar, Carlos; Moniz, Marta; Nunes, Pedro; Abadesso, Clara; Ferreira, Teresa; Barra, António; Lichtner, Anabela; Loureiro, Helena; Dias, Alexandra; Almeida, Helena
2017-10-31
The benefits of manual versus automated red blood cell exchange have rarely been documented and studies in young sickle cell disease patients are scarce. We aim to describe and compare our experience in these two procedures. Young patients (≤ 21 years old) who underwent manual- or automated-red blood cell exchange for prevention or treatment of sickle cell disease complications were included. Clinical, technical and hematological data were prospectively recorded and analyzed. Ninety-four red blood cell exchange sessions were performed over a period of 68 months, including 57 manual and 37 automated, 63 for chronic complications prevention, 30 for acute complications and one in the pre-operative setting. Mean decrease in sickle hemoglobin levels was higher in automated-red blood cell exchange (p < 0.001) and permitted a higher sickle hemoglobin level decrease per volume removed (p < 0.001), while hemoglobin and hematocrit remained stable. Ferritin levels on chronic patients decreased 54%. Most frequent concern was catheter outflow obstruction on manual-red blood cell exchange and access alarm on automated-red blood cell exchange. No major complication or alloimunization was recorded. Automated-red blood cell exchange decreased sickle hemoglobin levels more efficiently than manual procedure in the setting of acute and chronic complications of sickle cell disease, with minor technical concerns mainly due to vascular access. The threshold of sickle hemoglobin should be individualized for clinical and hematological goals. In our cohort of young patients, the need for an acceptable venous access was a limiting factor, but iron-overload was avoided. Automated red blood cell exchange is safe and well tolerated. It permits a higher sickle hemoglobin removal efficacy, better volume status control and iron-overload avoidance.
MANUAL OF PROCEDURES AND CRITERIA FOR CAMPUS DEVELOPMENT AND CAPITAL OUTLAY PLANNING.
ERIC Educational Resources Information Center
HELDMAN, HERBERT; MASON, THOMAS R.
THE PURPOSE OF THIS MANUAL IS TO PROVIDE A BASIS FOR SYSTEMATICALLY PROGRAMMING THE REQUIREMENTS FOR PHYSICAL PLANT AND LAND TO ACCOMMODATE THE NEEDS OF AN INSTITUTION UNDER A SPECIFIED SET OF CIRCUMSTANCES. THE MANUAL IS ORGANIZED INTO SIX BROAD ELEMENTS--(1) ACTIVITY LEVELS OF ENROLLMENT, INSTRUCTIONAL WORKLOADS AND STAFF REQUIREMENTS, (2)…
Certification Manual for Wisconsin Public Librarians. Bulletin No. 94111.
ERIC Educational Resources Information Center
Lamb, Donald K.
This manual contains the guidelines and procedures for public librarian certification and certification renewal in Wisconsin. Certification is not required for library personnel other than administrators, but nonadministrators may apply for certification at the level for which they are eligible. Requirements for voluntary library certification are…
Daily Living Skills: A Manual for Educating Visually Impaired Students.
ERIC Educational Resources Information Center
Lieberman, Gail, Ed.
The manual contains rationales, general approaches, and specific procedures for educators and parents to use in teaching daily living skills to visually impaired students. Detailed suggestions are given with regard to learning objectives for blind or partially sighted children, age levels, and instructional adaptations for developing competency in…
14 CFR 171.103 - Requests for IFR procedure.
Code of Federal Regulations, 2010 CFR
2010-01-01
... facility. (3) A proposed maintenance organization and a maintenance manual that meets the requirements of... facility has an acceptable level of operational reliability as prescribed in § 171.111(k), and an... the results and of any required changes in the facility or the maintenance manual or maintenance...
Public Affairs Manual. Revised 1976 Edition.
ERIC Educational Resources Information Center
American Alliance for Health, Physical Education, and Recreation, Washington, DC.
This public affairs manual is designed for health, physical education, and recreation personnel. It begins with a position statement by the American Alliance for Health, Physical Education, and Recreation (AAHPER). In section two, resources and procedures for crises action at the local and state level are discussed. Several organizational models…
ERIC Educational Resources Information Center
Smithyman, S. J.
This manual is designed to prepare students for entry-level positions as tree care professionals. Addressed in the individual chapters of the guide are the following topics: the tree service industry; clothing, eqiupment, and tools; tree workers; basic tree anatomy; techniques of pruning; procedures for climbing and working in the tree; aerial…
Consumer-Oriented Laboratory Activities: A Manual for Secondary Science Students.
ERIC Educational Resources Information Center
Anderson, Jacqueline; McDuffie, Thomas E., Jr.
This document provides a laboratory manual for use by secondary level students in performing consumer-oriented laboratory experiments. Each experiment includes an introductory question outlining the purpose of the investigation, a detailed discussion, detailed procedures, questions to be answered upon completing the experiment, and information for…
5 CFR 9701.406 - Setting and communicating performance expectations.
Code of Federal Regulations, 2011 CFR
2011-01-01
... apply to all employees, such as standard operating procedures, handbooks, or other operating... organizational level; (2) Organizational, occupational, or other work requirements, such as standard operating procedures, operating instructions, administrative manuals, internal rules and directives, and/or other...
5 CFR 9701.406 - Setting and communicating performance expectations.
Code of Federal Regulations, 2014 CFR
2014-01-01
... apply to all employees, such as standard operating procedures, handbooks, or other operating... organizational level; (2) Organizational, occupational, or other work requirements, such as standard operating procedures, operating instructions, administrative manuals, internal rules and directives, and/or other...
5 CFR 9701.406 - Setting and communicating performance expectations.
Code of Federal Regulations, 2012 CFR
2012-01-01
... apply to all employees, such as standard operating procedures, handbooks, or other operating... organizational level; (2) Organizational, occupational, or other work requirements, such as standard operating procedures, operating instructions, administrative manuals, internal rules and directives, and/or other...
5 CFR 9701.406 - Setting and communicating performance expectations.
Code of Federal Regulations, 2013 CFR
2013-01-01
... apply to all employees, such as standard operating procedures, handbooks, or other operating... organizational level; (2) Organizational, occupational, or other work requirements, such as standard operating procedures, operating instructions, administrative manuals, internal rules and directives, and/or other...
14 CFR 171.3 - Requests for IFR procedure.
Code of Federal Regulations, 2010 CFR
2010-01-01
... manual that meets the requirements of § 171.11. (4) A statement of intention to meet the requirements of this subpart. (5) A showing that the facility has an acceptable level of operational reliability and an... required changes in the facility or the maintenance manual or maintenance organization. The owner must then...
14 CFR 171.255 - Requests for IFR procedures.
Code of Federal Regulations, 2010 CFR
2010-01-01
... manual that meets the requirements of § 171.273. (4) A statement of intent to meet the requirements of this subpart. (5) A showing that the ISMLS facility has an acceptable level of operational reliability... the results and of any required changes in the ISMLS facility or in the maintenance manual or...
ERIC Educational Resources Information Center
Michael, Douglas O.
Prepared for use by the staff of a community college library, this manual describes the natural, building, and human hazards which can result in disaster in a library and outlines a set of disaster prevention measures and salvage procedures. A list of salvage priorities, floor plans for all three levels of Bourke Memorial Library, and staff duties…
Interest Projects for Cadette and Senior Girl Scouts.
ERIC Educational Resources Information Center
Ayala, Sandy; And Others
Noting the importance of choosing a project that is interesting or relevant to one's personal goals, this manual provides activities which can be undertaken to earn cadette and senior level girl scout interest patches. Part 1 of the manual deals with procedures to develop an interest project, including working with consultants, interviewing,…
Information Manual: Procedures, Planning Concepts, Subsystems. ABS Publication No. 3.
ERIC Educational Resources Information Center
California Univ., Berkeley.
This report, the third in a series which presents the results of a systems analysis of the problem of providing science and engineering buildings at the university level, is a technical manual for using the Academic Building Systems (ABS) approach in programing, designing, and constructing such facilities. The document presents (1) planning…
Supervision Manual: Social Studies Program.
ERIC Educational Resources Information Center
Szabo, Lester John
This manual is designed to help school personnel implement a social studies program in grades K-12 in New York State. It provides the State mandates for social studies, recommends the scope and sequence of the social studies program, and suggests a procedure for implementing social studies revisions at the local level. How to form a local social…
Evaluation of a training manual for the acquisition of behavioral assessment interviewing skills.
Miltenberger, R G; Fuqua, R W
1985-01-01
Two procedures were used to teach behavioral assessment interviewing skills: a training manual and one-to-one instruction that included modeling, rehearsal, and feedback. Two graduate students and two advanced undergraduates were trained with each procedure. Interviewing skills were recorded in simulated assessment interviews conducted by each student across baseline and treatment conditions. Each training procedure was evaluated in a multiple baseline across students design. The results showed that both procedures were effective for training behavioral interviewing skills, with all students reaching a level of 90%-100% correct responding. Finally, a group of experts in behavior analysis rated each interviewing skill as relevant to the conduct of an assessment interview and a group of behavioral clinicians socially validated the outcomes of the two procedures. PMID:4086413
Fluorometric procedures for dye tracing
Wilson, James F.; Cobb, Ernest D.; Kilpatrick, F.A.
1986-01-01
This manual describes the current fluorometric procedures used by the U.S. Geological Survey in dye tracer studies such as time of travel, dispersion, reaeration, and dilution-type discharge measurements. The advantages of dye tracing are (1) low detection and measurement limits and (2) simplicity and accuracy in measuring dye tracer concentrations using fluorometric techniques. The manual contains necessary background information about fluorescence, dyes, and fluorometers and a description of fluorometric operation and calibration procedures as a guide for laboratory and field use. The background information should be useful to anyone wishing to experiment with dyes, fluorometer components, or procedures different from those described. In addition, a brief section on aerial photography is included because of its possible use to supplement ground-level fluorometry.
Fluorometric procedures for dye tracing
Wilson, James F.
1968-01-01
This manual describes the current fluorometric procedures used by the U.S. Geological Survey in dye tracer studies such as time of travel, dispersion, reaeration, and dilution-type discharge measurements. The advantages of dye tracing are (1) low detection and measurement limits and (2) simplicity and accuracy in measuring dye tracer concentrations using fluorometric techniques. The manual contains necessary background information about fluorescence, dyes, and fluorometers and a description of fluorometric operation and calibration procedures as a guide for laboratory and field use. The background information should be useful to anyone wishing to experiment with dyes, fluorometer components, or procedures different from those described. In addition, a brief section on aerial photography is included because of its possible use to supplement ground-level fluorometry.
Fluorometric procedures for dye tracing
Wilson, James E.; Cobb, Ernest D.; Kilpatrick, Frederick A.
1984-01-01
This manual describes the current fluorometric procedures used by the U.S. Geological Survey in dye tracer studies such as time of travel, dispersion, reaeration, and dilution-type discharge measurements. The outstanding characteristics of dye tracing are: (1) the low detection and measurement limits, and (2) the simplicity and accuracy of measuring dye tracer concentrations using fluorometric techniques. The manual contains necessary background information about fluorescence, dyes, and fluorometers and a description of fluorometric operation and calibration procedures as a general guide for laboratory and field use. The background information should be useful to anyone wishing to experiment with dyes, fluorometer components, or procedures different from those described. In addition, a brief section is included on aerial photography because of its possible use to supplement ground-level fluorometry.
Pollutant Assessments Group procedures manual: Volume 2, Technical procedures
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1992-03-01
This is volume 2 of the manuals that describes the technical procedures currently in use by the Pollution Assessments Group. This manual incorporates new developments in hazardous waste assessment technology and administrative policy. Descriptions of the equipment, procedures and operations of such things as radiation detection, soil sampling, radionuclide monitoring, and equipment decontamination are included in this manual. (MB)
40 CFR 63.1547 - Monitoring requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... standard operating procedures manual that describes in detail the procedures for inspection, maintenance...) The standard operating procedures manual for baghouses required by paragraph (a) of this section shall... specified in the standard operating procedures manual for inspections and routine maintenance shall, at a...
40 CFR 63.1547 - Monitoring requirements.
Code of Federal Regulations, 2011 CFR
2011-07-01
... standard operating procedures manual that describes in detail the procedures for inspection, maintenance...) The standard operating procedures manual for baghouses required by paragraph (a) of this section shall... specified in the standard operating procedures manual for inspections and routine maintenance shall, at a...
40 CFR 63.1547 - Monitoring requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
... according to, a standard operating procedures manual that describes in detail the procedures for inspection...) The standard operating procedures manual for baghouses required by paragraph (a) of this section must... specified in the standard operating procedures manual for inspections and routine maintenance must, at a...
40 CFR 63.1547 - Monitoring requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
... according to, a standard operating procedures manual that describes in detail the procedures for inspection...) The standard operating procedures manual for baghouses required by paragraph (a) of this section must... specified in the standard operating procedures manual for inspections and routine maintenance must, at a...
40 CFR 63.1547 - Monitoring requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
... according to, a standard operating procedures manual that describes in detail the procedures for inspection...) The standard operating procedures manual for baghouses required by paragraph (a) of this section must... specified in the standard operating procedures manual for inspections and routine maintenance must, at a...
Automatized set-up procedure for transcranial magnetic stimulation protocols.
Harquel, S; Diard, J; Raffin, E; Passera, B; Dall'Igna, G; Marendaz, C; David, O; Chauvin, A
2017-06-01
Transcranial Magnetic Stimulation (TMS) established itself as a powerful technique for probing and treating the human brain. Major technological evolutions, such as neuronavigation and robotized systems, have continuously increased the spatial reliability and reproducibility of TMS, by minimizing the influence of human and experimental factors. However, there is still a lack of efficient set-up procedure, which prevents the automation of TMS protocols. For example, the set-up procedure for defining the stimulation intensity specific to each subject is classically done manually by experienced practitioners, by assessing the motor cortical excitability level over the motor hotspot (HS) of a targeted muscle. This is time-consuming and introduces experimental variability. Therefore, we developed a probabilistic Bayesian model (AutoHS) that automatically identifies the HS position. Using virtual and real experiments, we compared the efficacy of the manual and automated procedures. AutoHS appeared to be more reproducible, faster, and at least as reliable as classical manual procedures. By combining AutoHS with robotized TMS and automated motor threshold estimation methods, our approach constitutes the first fully automated set-up procedure for TMS protocols. The use of this procedure decreases inter-experimenter variability while facilitating the handling of TMS protocols used for research and clinical routine. Copyright © 2017 Elsevier Inc. All rights reserved.
40 CFR 63.1549 - Recordkeeping and reporting requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
... recordkeeping required as part of the practices described in the standard operating procedures manual for... as part of the practices described in the standard operating procedures manual for baghouses required... procedures outlined in the standard operating procedures manual required by § 63.1544(a) were not followed...
40 CFR 63.1549 - Recordkeeping and reporting requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
... recordkeeping required as part of the practices described in the standard operating procedures manual for... as part of the practices described in the standard operating procedures manual for baghouses required... procedures outlined in the standard operating procedures manual required by § 63.1544(a) were not followed...
40 CFR 63.1549 - Recordkeeping and reporting requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
... recordkeeping required as part of the practices described in the standard operating procedures manual for... as part of the practices described in the standard operating procedures manual for baghouses required... procedures outlined in the standard operating procedures manual required by § 63.1544(a) were not followed...
High-level neutron coincidence counter maintenance manual
DOE Office of Scientific and Technical Information (OSTI.GOV)
Swansen, J.; Collinsworth, P.
1983-05-01
High-level neutron coincidence counter operational (field) calibration and usage is well known. This manual makes explicit basic (shop) check-out, calibration, and testing of new units and is a guide for repair of failed in-service units. Operational criteria for the major electronic functions are detailed, as are adjustments and calibration procedures, and recurrent mechanical/electromechanical problems are addressed. Some system tests are included for quality assurance. Data on nonstandard large-scale integrated (circuit) components and a schematic set are also included.
Preliminary Staff Manual for the Gloucester Couny College Library.
ERIC Educational Resources Information Center
Salisbury, Julie Davitt
This manual is a summary of the policies and procedures now in effect in the Gloucester County College Library. The first 41 pages deal with such items as: (1) importance of preparing a manual, (2) types of manuals, (3) procedures for compiling a staff manual, (4) requirements of a staff manual, (5) uses of the staff manual, (6) history of the…
46 CFR 130.480 - Test procedure and operations manual.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 4 2010-10-01 2010-10-01 false Test procedure and operations manual. 130.480 Section... VESSEL CONTROL, AND MISCELLANEOUS EQUIPMENT AND SYSTEMS Automation of Unattended Machinery Spaces § 130.480 Test procedure and operations manual. (a) A procedure for tests to be conducted on automated...
40 CFR 60.1175 - What information must I include in the plant-specific operating manual?
Code of Federal Regulations, 2010 CFR
2010-07-01
... waste combustion unit. (e) Procedures for maintaining a proper level of combustion air supply. (f... Standards of Performance for Small Municipal Waste Combustion Units for Which Construction is Commenced... municipal waste combustion units. (c) Procedures for receiving, handling, and feeding municipal solid waste...
Code of Federal Regulations, 2011 CFR
2011-10-01
... the Transportation Acquisition Manual (TAM). OA procedures necessary to implement or supplement the (FAR) 48 CFR chapter 1, (TAR) 48 CFR chapter 12, or TAM may be issued by the Head of the Contracting... procedures may be more restrictive or require higher approval levels than those permitted by the TAM unless...
The NASTRAN User's Manual Level 16.0 and Supplement
NASA Technical Reports Server (NTRS)
1976-01-01
The user's manual is restricted to those items related to the use of NASTRAN that are independent of the computing system being used. The features of NASTRAN described include: (1) procedures for defining and loading a structural model and a functional reference for every card that is used for structural modeling; (2) the NASTRAN data deck, including the details for each of the data cards; (3) the NASTRAN control cards that are associated with the use of the program; (4) rigid format procedures, along with specific instructions for the use of each rigid format: (5) procedures for using instructions for the use of each rigid format; (5) procedures for using the NASTRAN plotting capability; (6) procedures governing the creation of DMAP programs; and (7) the NASTRAN diagnostic messages. The NASTRAN dictionary of mnemonics, acronyms, phrases, and other commonly used NASTRAN terms is included along with a limited number of sample problems.
Intradiscal Pressure Changes during Manual Cervical Distraction: A Cadaveric Study
Gudavalli, M. R.; Potluri, T.; Carandang, G.; Havey, R. M.; Voronov, L. I.; Cox, J. M.; Rowell, R. M.; Kruse, R. A.; Joachim, G. C.; Patwardhan, A. G.; Henderson, C. N. R.; Goertz, C.
2013-01-01
The objective of this study was to measure intradiscal pressure (IDP) changes in the lower cervical spine during a manual cervical distraction (MCD) procedure. Incisions were made anteriorly, and pressure transducers were inserted into each nucleus at lower cervical discs. Four skilled doctors of chiropractic (DCs) performed MCD procedure on nine specimens in prone position with contacts at C5 or at C6 vertebrae with the headpiece in different positions. IDP changes, traction forces, and manually applied posterior-to-anterior forces were analyzed using descriptive statistics. IDP decreases were observed during MCD procedure at all lower cervical levels C4-C5, C5-C6, and C6-C7. The mean IDP decreases were as high as 168.7 KPa. Mean traction forces were as high as 119.2 N. Posterior-to-anterior forces applied during manual traction were as high as 82.6 N. Intraclinician reliability for IDP decrease was high for all four DCs. While two DCs had high intraclinician reliability for applied traction force, the other two DCs demonstrated only moderate reliability. IDP decreases were greatest during moving flexion and traction. They were progressevely less pronouced with neutral traction, fixed flexion and traction, and generalized traction. PMID:24023587
How to Write Effective Procedure Manuals.
ERIC Educational Resources Information Center
Wold, Geoffrey H.
1987-01-01
Describes six key guidelines for developing usable procedure manuals, including defining the audience; designing a standard format; preparing an outline; using a clear, concise writing style; testing the procedures; and "finalizing" the product with indices, glossaries, appendices, and section tabs. Well-written manuals can increase…
40 CFR 63.548 - Monitoring requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
...) You must prepare, and at all times operate according to, a standard operating procedures manual that...) You must submit the standard operating procedures manual for baghouses required by paragraph (a) of... that you specify in the standard operating procedures manual for inspections and routine maintenance...
40 CFR 63.548 - Monitoring requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
...) You must prepare, and at all times operate according to, a standard operating procedures manual that...) You must submit the standard operating procedures manual for baghouses required by paragraph (a) of... that you specify in the standard operating procedures manual for inspections and routine maintenance...
40 CFR 63.548 - Monitoring requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
...) You must prepare, and at all times operate according to, a standard operating procedures manual that...) You must submit the standard operating procedures manual for baghouses required by paragraph (a) of... that you specify in the standard operating procedures manual for inspections and routine maintenance...
Microbial ecology laboratory procedures manual NASA/MSFC
NASA Technical Reports Server (NTRS)
Huff, Timothy L.
1990-01-01
An essential part of the efficient operation of any microbiology laboratory involved in sample analysis is a standard procedures manual. The purpose of this manual is to provide concise and well defined instructions on routine technical procedures involving sample analysis and methods for monitoring and maintaining quality control within the laboratory. Of equal importance is the safe operation of the laboratory. This manual outlines detailed procedures to be followed in the microbial ecology laboratory to assure safety, analytical control, and validity of results.
NASA Technical Reports Server (NTRS)
Guseman, L. F., Jr.; Decell, H. P., Jr.
1975-01-01
An outline for an Image 100 procedures manual for Earth Resources Program image analysis was developed which sets forth guidelines that provide a basis for the preparation and updating of an Image 100 Procedures Manual. The scope of the outline was limited to definition of general features of a procedures manual together with special features of an interactive system. Computer programs were identified which should be implemented as part of an applications oriented library for the system.
NASA Technical Reports Server (NTRS)
Waggoner, J. T.; Phinney, D. E. (Principal Investigator)
1981-01-01
The crop estimation analysis procedures documentation of the AgRISTARS - Foreign Commodity Production Forecasting Project (FCPF) is presented. Specifically it includes the technical/management documentation of the remote sensing data analysis procedures prepared in accordance with the guidelines provided in the FCPF communication/documentation standards manual. Standard documentation sets are given arranged by procedural type and level then by crop types or other technically differentiating categories.
An Organizational Effectiveness Officer Tackles a Management Job: A follow-Up OE Case Study
1981-06-01
time, the COPPER "users manual " had not been updated to reflect the current methods and procedures of the PPSD. RAJ Johnson felt that documentation of...Users’ Manual , now known as PPSD Users’ Manual , to document every action and show document ilow with a flow chart. Also prior to implementing the change...comments is a document to work from. I’ll use it from my level, but let’s push it down in the organizacion ." When interviewed in December, RAJ Johnson was
Guatemala's ministry of health rapid response team manuals.
Hernandez, Luis; Hanson, Kimberly M; Martel, Lise D
2014-01-01
The function of public health rapid response teams (RRTs) is to quickly identify, investigate, and control an outbreak before it can spread. The Central America Regional Office in Guatemala provided assistance to the Guatemalan Ministry of Health and Social Assistance (MSPAS) to develop RRT manuals at the district and regional levels. The manuals are divided into 4 sections: background, activity lists, standard operating procedures, and annexes. The manuals outline Guatemala's RRT members' responsibilities and will be tested in the near future through tabletop exercises. The development of the manuals is a concrete and significant step toward the attainment of Guatemala's IHR goals and should be integrated into a larger emergency management system to promote "a world safe and secure from global health threats posed by infectious diseases."
76 FR 68328 - Commercial Driver's License Information System State Procedures Manual, Release 5.2.0
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-04
... mandating CDLIS and discusses types of CDLIS users. This Manual also includes descriptions, excerpted from... Manual, Release 5.2.0 AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION: Final...) Commercial Driver's License Information System (CDLIS) State Procedures Manual (the Manual) (Release 5.2.0...
Tennessee environmental procedures manual
DOT National Transportation Integrated Search
2007-04-16
The Tennessee Environmental Procedures Manual (TEPM or manual) provides guidance for the preparation of environmental analysis and documentation for federally funded and state-funded transportation projects. /Abstract from report, p. I-1/
40 CFR 63.1549 - Recordkeeping and reporting requirements.
Code of Federal Regulations, 2011 CFR
2011-07-01
... the practices described in the standard operating procedures manual required under § 63.1544(a) for... described in the standard operating procedures manual for baghouses required under § 63.1547(a). (6) If an... in the standard operating procedures manual for baghouses required under § 63.1547(a), including an...
40 CFR 63.545 - Standards for fugitive dust sources.
Code of Federal Regulations, 2011 CFR
2011-07-01
... according to a standard operating procedures manual that describes in detail the measures that will be put... standard operating procedures manual shall be submitted to the Administrator or delegated authority for review and approval. (c) The controls specified in the standard operating procedures manual shall at a...
40 CFR 63.545 - Standards for fugitive dust sources.
Code of Federal Regulations, 2010 CFR
2010-07-01
... according to a standard operating procedures manual that describes in detail the measures that will be put... standard operating procedures manual shall be submitted to the Administrator or delegated authority for review and approval. (c) The controls specified in the standard operating procedures manual shall at a...
40 CFR 63.1549 - Recordkeeping and reporting requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... the practices described in the standard operating procedures manual required under § 63.1544(a) for... described in the standard operating procedures manual for baghouses required under § 63.1547(a). (6) If an... in the standard operating procedures manual for baghouses required under § 63.1547(a), including an...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Biebesheimer, E., Westinghouse Hanford Co.
This document, the Standards/Requirements Identification Document (S/RID) Phase I Assessment Report for the subject facility, represents the results of an Administrative Assessment to determine whether S/RID requirements are fully addressed by existing policies, plans or procedures. It contains; compliance status, remedial actions, and an implementing manuals report linking S/RID elements to requirement source to implementing manual and section.
Policy Level Information on Logistics-Oriented Research.
1980-08-01
Logistics Planann and System Long-Range Management Technology Planning Evaluation of Rold Miasion of Support Organizacion Effective Cross-Service Policies...guidelines, solution procedures, etc. The documentation format (technical report, user’s manual , briefing slides, etc.) also falls into this category...CHECK AT LEAST ONE) PhD Dissertation SMaster’s Thesis 7 Memorandum L Briefing Q Technical Report 7 Software Product O Hardware Product Q7 User’s Manual
Guatemala’s Ministry of Health Rapid Response Team Manuals
Hernandez, Luis; Hanson, Kimberly M.; Martel, Lise D.
2017-01-01
The function of public health rapid response teams (RRTs) is to quickly identify, investigate, and control an outbreak before it can spread. The Central America Regional Office in Guatemala provided assistance to the Guatemalan Ministry of Health and Social Assistance (MSPAS) to develop RRT manuals at the district and regional levels. The manuals are divided into 4 sections: background, activity lists, standard operating procedures, and annexes. The manuals outline Guatemala’s RRT members’ responsibilities and will be tested in the near future through tabletop exercises. The development of the manuals is a concrete and significant step toward the attainment of Guatemala’s IHR goals and should be integrated into a larger emergency management system to promote “a world safe and secure from global health threats posed by infectious diseases.” PMID:25254918
NASA Technical Reports Server (NTRS)
1976-01-01
Assumptions made and techniques used in modeling the power network to the 480 volt level are discussed. Basic computational techniques used in the short circuit program are described along with a flow diagram of the program and operational procedures. Procedures for incorporating network changes are included in this user's manual.
Four-point bending as a method for quantitatively evaluating spinal arthrodesis in a rat model.
Robinson, Samuel T; Svet, Mark T; Kanim, Linda A; Metzger, Melodie F
2015-02-01
The most common method of evaluating the success (or failure) of rat spinal fusion procedures is manual palpation testing. Whereas manual palpation provides only a subjective binary answer (fused or not fused) regarding the success of a fusion surgery, mechanical testing can provide more quantitative data by assessing variations in strength among treatment groups. We here describe a mechanical testing method to quantitatively assess single-level spinal fusion in a rat model, to improve on the binary and subjective nature of manual palpation as an end point for fusion-related studies. We tested explanted lumbar segments from Sprague-Dawley rat spines after single-level posterolateral fusion procedures at L4-L5. Segments were classified as 'not fused,' 'restricted motion,' or 'fused' by using manual palpation testing. After thorough dissection and potting of the spine, 4-point bending in flexion then was applied to the L4-L5 motion segment, and stiffness was measured as the slope of the moment-displacement curve. Results demonstrated statistically significant differences in stiffness among all groups, which were consistent with preliminary grading according to manual palpation. In addition, the 4-point bending results provided quantitative information regarding the quality of the bony union formed and therefore enabled the comparison of fused specimens. Our results demonstrate that 4-point bending is a simple, reliable, and effective way to describe and compare results among rat spines after fusion surgery.
Operator Certification Study Guide.
ERIC Educational Resources Information Center
American Water Works Association, Denver, CO.
This study guide contains typical questions and answers that all levels of water treatment plant operators might expect to find on a certification examination. The manual covers the basic sciences, treatment techniques, testing procedures, and federal legislation. (Author/SB)
NASA Technical Reports Server (NTRS)
Billman, Dorrit Owen; Schreckenghost, Debra; Miri, Pardis
2014-01-01
Astronauts will be responsible for executing a much larger body of procedures as human exploration moves further from Earth and Mission Control. Efficient, reliable methods for executing these procedures, including manual, automated, and mixed execution will be important. Our interface integrates step-by-step instruction with the means for execution. The research reported here compared manual execution using the new system to a system analogous to the manual-only system currently in use on the International Space Station, to assess whether user performance in manual operations would be as good or better with the new than with the legacy system. The system used also allows flexible automated execution. The system and our data lay the foundation for integrating automated execution into the flow of procedures designed for humans. In our formative study, we found speed and accuracy of manual procedure execution was better using the new, integrated interface over the legacy design.
14 CFR 36.1501 - Procedures, noise levels and other information.
Code of Federal Regulations, 2011 CFR
2011-01-01
... airplane (rotorcraft) flight manual. (b) Where supplemental test data are approved for modification or extension of an existing flight data base, such as acoustic data from engine static tests used in the..., weights, configurations, and other information or data employed for obtaining the certified noise levels...
14 CFR 36.1501 - Procedures, noise levels and other information.
Code of Federal Regulations, 2014 CFR
2014-01-01
... airplane (rotorcraft) flight manual. (b) Where supplemental test data are approved for modification or extension of an existing flight data base, such as acoustic data from engine static tests used in the..., weights, configurations, and other information or data employed for obtaining the certified noise levels...
14 CFR 36.1501 - Procedures, noise levels and other information.
Code of Federal Regulations, 2012 CFR
2012-01-01
... airplane (rotorcraft) flight manual. (b) Where supplemental test data are approved for modification or extension of an existing flight data base, such as acoustic data from engine static tests used in the..., weights, configurations, and other information or data employed for obtaining the certified noise levels...
14 CFR 36.1501 - Procedures, noise levels and other information.
Code of Federal Regulations, 2010 CFR
2010-01-01
... airplane (rotorcraft) flight manual. (b) Where supplemental test data are approved for modification or extension of an existing flight data base, such as acoustic data from engine static tests used in the..., weights, configurations, and other information or data employed for obtaining the certified noise levels...
14 CFR 36.1501 - Procedures, noise levels and other information.
Code of Federal Regulations, 2013 CFR
2013-01-01
... airplane (rotorcraft) flight manual. (b) Where supplemental test data are approved for modification or extension of an existing flight data base, such as acoustic data from engine static tests used in the..., weights, configurations, and other information or data employed for obtaining the certified noise levels...
Fault diagnosis in orbital refueling operations
NASA Technical Reports Server (NTRS)
Boy, Guy A.
1988-01-01
Usually, operation manuals are provided for helping astronauts during space operations. These manuals include normal and malfunction procedures. Transferring operation manual knowledge into a computerized form is not a trivial task. This knowledge is generally written by designers or operation engineers and is often quite different from the user logic. The latter is usually a compiled version of the former. Experiments are in progress to assess the user logic. HORSES (Human - Orbital Refueling System - Expert System) is an attempt to include both of these logics in the same tool. It is designed to assist astronauts during monitoring and diagnosis tasks. Basically, HORSES includes a situation recognition level coupled to an analytical diagnoser, and a meta-level working on both of the previous levels. HORSES is a good tool for modeling task models and is also more broadly useful for knowledge design. The presentation is represented by abstract and overhead visuals only.
Operating manual for the R200 downhole recorder with husky hunter retriever
Johnson, Roy A.; Rorabaugh, James I.
1988-01-01
The R200 Downhole Recorder is a battery-powered device that, when placed in a well casing, monitors water levels for a period of up to 1 year. This instrument measures a 1- to 70-foot range of water levels. These water-level data can be retrieved through use of a commercially available portable microcomputer. The R200 Downhole Recorder was developed at the U.S. Geological Survey 's Hydrologic Instrumentation Facility, Stennis Space Center, Mississippi. This operating manual describes the R200 Downhole Recorder, provides initial set-up instructions, and gives directions for on-site operation. Design specifications and routine maintenance steps are included. The R200 data-retriever program is a user-friendly, menu-driven program. The manual guides the user through the procedures required to perform specific operations. Numerous screens are reproduced in the text with a discussion of user input for desired responses. Help is provided for specific problems. (USGS)
Operating manual for the R200 downhole recorder with Tandy 102 retriever
Johnson, Roy A.; Rorabaugh, James I.
1988-01-01
The R200 Downhole Recorder is a battery-powered device that, when placed in a well casing, monitors water levels for a period of up to 1 year. This instrument measures a 1- to 70-ft range of water levels. These water level data can be retrieved through use of a commercially available portable microcomputer. The R200 Downhole Recorder was developed at the U. S. Geological Survey 's Hydrologic Instrumentation Facility, Stennis Space Center, Mississippi. This operating manual describes the R200 Downhole Recorder, provides initial set-up instructions, and gives directions for on-site operation. Design specifications and routine maintenance steps are included. The R200 data-retriever program is a user-friendly, menu-driven program. The manual guides the user through the procedures required to perform specific operations. Numerous screens are reproduced in the text with a discussion of user input for desired responses. Help is provided for specific problems. (USGS)
Levels at streamflow gaging stations
Kennedy, E.J.
1990-01-01
This manual establishes the surveying procedures for (1) setting gages at a streamflow gaging station to datum and (2) checking the gages periodically for errors caused by vertical movement of the structures that support them. Surveying terms and concepts are explained, and procedures for testing, adjusting, and operating the instruments are described in detail. Notekeeping, adjusting level circuits, checking gages, summarizing results, locating the nearest National Geodetic Vertical Datum of 1929 bench mark, and relating the gage datum to the national datum are also described.
Overestimation of the 25(OH)D serum concentration with the automated IDS EIA kit.
Cavalier, Etienne; Huberty, Véronique; Cormier, Catherine; Souberbielle, Jean-Claude
2011-02-01
We have recently observed an increasing number of patients presenting very high serum levels of 25-hydroxyvitamin D [25(OH)D] (> 150 ng/mL), which, in all cases, had been measured with the IDS EIA kit adapted on different "open" automated platforms. We performed a comparison between the IDS EIA kit adapted on two different "open"automated platforms and the DiaSorin RIA. We found a systematic bias (higher levels with the IDS EIA kit) for concentrations more than 50-60 ng/mL that was less obvious when the IDS EIA was used in its manual procedure. We thus suggest to use the IDS EIA kit in its manual procedure rather than to adapt it on an automated platform, and to interpret cautiously a 25(OH)D greater than 100 ng/mL with this kit. Copyright © 2011 American Society for Bone and Mineral Research.
NASA Astrophysics Data System (ADS)
Mallari, Lawrence Anthony Castro
This project proposes a manual specifically for remedying an ineffective Corrective Action Request System for Company ABC by providing dispositions within the company's quality procedure. A Corrective Action Request System is a corrective action tool that provides a means for employees to engage in the process improvement, problem elimination cycle. At Company ABC, Corrective Action Recommendations (CARs) are not provided with timely dispositions; CARs are being ignored due to a lack of training and awareness of Company ABC's personnel and quality procedures. In this project, Company ABC's quality management software database is scrutinized to identify the number of delinquent, non-dispositioned CARs in 2014. These CARs are correlated with the number of nonconformances generated for the same issue while the CAR is still open. Using secondary data, the primary investigator finds that nonconformances are being remediated at the operational level. However, at the administrative level, CARS are being ignored and forgotten.
Long Term Resource Monitoring Program procedures: fish monitoring
Ratcliff, Eric N.; Glittinger, Eric J.; O'Hara, T. Matt; Ickes, Brian S.
2014-01-01
This manual constitutes the second revision of the U.S. Army Corps of Engineers’ Upper Mississippi River Restoration-Environmental Management Program (UMRR-EMP) Long Term Resource Monitoring Program (LTRMP) element Fish Procedures Manual. The original (1988) manual merged and expanded on ideas and recommendations related to Upper Mississippi River fish sampling presented in several early documents. The first revision to the manual was made in 1995 reflecting important protocol changes, such as the adoption of a stratified random sampling design. The 1995 procedures manual has been an important document through the years and has been cited in many reports and scientific manuscripts. The resulting data collected by the LTRMP fish component represent the largest dataset on fish within the Upper Mississippi River System (UMRS) with more than 44,000 collections of approximately 5.7 million fish. The goal of this revision of the procedures manual is to document changes in LTRMP fish sampling procedures since 1995. Refinements to sampling methods become necessary as monitoring programs mature. Possible refinements are identified through field experiences (e.g., sampling techniques and safety protocols), data analysis (e.g., planned and studied gear efficiencies and reallocations of effort), and technological advances (e.g., electronic data entry). Other changes may be required because of financial necessity (i.e., unplanned effort reductions). This version of the LTRMP fish monitoring manual describes the most current (2014) procedures of the LTRMP fish component.
Practices & Procedures of Mason Tending I & II. Instructor Manual. Trainee Manual.
ERIC Educational Resources Information Center
Laborers-AGC Education and Training Fund, Pomfret Center, CT.
This packet consists of the instructor and trainee manuals for two courses: practices and procedures of mason tending I and II. The instructor manual for mason tending I contains a schedule for a 40-hour, 5-day course and instructor outline. The outline provides a step-by-step description of the instructor's activities and includes answer sheets…
Cohen, Micah G; McMahon, Colm J; Kung, Justin W; Wu, Jim S
2016-05-01
The purpose of this study was to compare manual and battery-powered bone biopsy systems for diagnostic yield and procedural factors during core needle biopsy of sclerotic bone lesions. A total of 155 consecutive CT-guided core needle biopsies of sclerotic bone lesions were performed at one institution from January 2006 to November 2014. Before March 2012, lesions were biopsied with manual bone drill systems. After March 2012, most biopsies were performed with a battery-powered system and either noncoaxial or coaxial biopsy needles. Diagnostic yield, crush artifact, CT procedure time, procedure radiation dose, conscious sedation dose, and complications were compared between the manual and battery-powered core needle biopsy systems by Fisher exact test and t test. One-way ANOVA was used for subgroup analysis of the two battery-powered systems for procedure time and radiation dose. The diagnostic yield for all sclerotic lesions was 60.0% (93/155) and was significantly higher with the battery-powered system (73.0% [27/37]) than with the manual systems (55.9% [66/118]) (p = 0.047). There was no significant difference between the two systems in terms of crush artifact, procedure time, radiation dose, conscious sedation administered, or complications. In subgroup analysis, the coaxial battery-powered biopsies had shorter procedure times (p = 0.01) and lower radiation doses (p = 0.002) than the coaxial manual systems, but the noncoaxial battery-powered biopsies had longer average procedure times and higher radiation doses than the coaxial manual systems. In biopsy of sclerotic bone lesions, use of a battery-powered bone drill system improves diagnostic yield over use of a manual system.
Motor Development: Manual of Alternative Procedures.
ERIC Educational Resources Information Center
McCormack, James E.
The manual of alternative procedures for teaching handicapped children focuses on programming, planning, and implementing training in the gross motor (posture, limb control, locomotion) and fine motor (facial, digital) skills. The manual consists of the following sections: specific teaching tactics commonly used in motor training stiuations…
ERIC Educational Resources Information Center
Morris, Suzanne Evans
The manual contains the Pre-Speech Assessment Scale (PSAS) intended for use with cerebral palsied and other handicapped children to evaluate behaviors at the birth through 2-year age level. Introductory information covers the development of the PSAS, concepts underlying the PSAS, evaluation procedures, scoring the PSAS, and graphing procedures.…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Yamagami, Takuji, E-mail: yamagami@koto.kpu-m.ac.jp; Kato, Takeharu; Hirota, Tatsuya
2006-12-15
The goal of this study was to evaluate the efficacy of simple aspiration of air from the pleural space to prevent increased pneumothorax and avoid chest tube placement in cases of pneumothorax following interventional radiological procedures performed under computed tomography fluoroscopic guidance with the transthoracic percutaneous approach. While still on the scanner table, 102 cases underwent percutaneous manual aspiration of a moderate or large pneumothorax that had developed during mediastinal, lung, and transthoracic liver biopsies and ablations of lung and hepatic tumors (independent of symptoms). Air was aspirated from the pleural space by an 18- or 20-gauge intravenous catheter attachedmore » to a three-way stopcock and 20- or 50-mL syringe. We evaluated the management of each such case during and after manual aspiration. In 87 of the 102 patients (85.3%), the pneumothorax had resolved completely on follow-up chest radiographs without chest tube placement, but chest tube placement was required in 15 patients. Requirement of chest tube insertion significantly increased in parallel with the increased volume of aspirated air. When receiver-operating characteristic curves were applied retrospectively, the optimal cutoff level of aspirated air on which to base a decision to abandon manual aspiration alone and resort to chest tube placement was 670 mL. Percutaneous manual aspiration of the pneumothorax performed immediately after the procedure might prevent progressive pneumothorax and eliminate the need for chest tube placement. However, when the amount of aspirated air is large (such as more than 670 mL), chest tube placement should be considered.« less
48 CFR 1302.101 - Definitions.
Code of Federal Regulations, 2013 CFR
2013-10-01
... provides that the authority of the Secretary is non-delegable. Chief Acquisition Officer (CAO) means the Department's executive-level non-career employee designated pursuant to the Services Acquisition Reform Act.... Commerce Acquisition Manual (CAM) means non-regulatory uniform policies and procedures for internal...
48 CFR 1302.101 - Definitions.
Code of Federal Regulations, 2012 CFR
2012-10-01
... provides that the authority of the Secretary is non-delegable. Chief Acquisition Officer (CAO) means the Department's executive-level non-career employee designated pursuant to the Services Acquisition Reform Act.... Commerce Acquisition Manual (CAM) means non-regulatory uniform policies and procedures for internal...
48 CFR 1302.101 - Definitions.
Code of Federal Regulations, 2014 CFR
2014-10-01
... provides that the authority of the Secretary is non-delegable. Chief Acquisition Officer (CAO) means the Department's executive-level non-career employee designated pursuant to the Services Acquisition Reform Act.... Commerce Acquisition Manual (CAM) means non-regulatory uniform policies and procedures for internal...
48 CFR 1302.101 - Definitions.
Code of Federal Regulations, 2011 CFR
2011-10-01
... provides that the authority of the Secretary is non-delegable. Chief Acquisition Officer (CAO) means the Department's executive-level non-career employee designated pursuant to the Services Acquisition Reform Act.... Commerce Acquisition Manual (CAM) means non-regulatory uniform policies and procedures for internal...
14 CFR 27.1585 - Operating procedures.
Code of Federal Regulations, 2014 CFR
2014-01-01
....1585 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... Manual and Approved Manual Material § 27.1585 Operating procedures. (a) Parts of the manual containing... 605 of the Federal Aviation Act of 1958 (49 U.S.C. 1354(a), 1421, 1423, 1424, and 1425); and sec. 6(c...
14 CFR 27.1585 - Operating procedures.
Code of Federal Regulations, 2012 CFR
2012-01-01
....1585 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... Manual and Approved Manual Material § 27.1585 Operating procedures. (a) Parts of the manual containing... 605 of the Federal Aviation Act of 1958 (49 U.S.C. 1354(a), 1421, 1423, 1424, and 1425); and sec. 6(c...
14 CFR 27.1585 - Operating procedures.
Code of Federal Regulations, 2013 CFR
2013-01-01
....1585 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... Manual and Approved Manual Material § 27.1585 Operating procedures. (a) Parts of the manual containing... 605 of the Federal Aviation Act of 1958 (49 U.S.C. 1354(a), 1421, 1423, 1424, and 1425); and sec. 6(c...
14 CFR 27.1585 - Operating procedures.
Code of Federal Regulations, 2011 CFR
2011-01-01
....1585 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... Manual and Approved Manual Material § 27.1585 Operating procedures. (a) Parts of the manual containing... 605 of the Federal Aviation Act of 1958 (49 U.S.C. 1354(a), 1421, 1423, 1424, and 1425); and sec. 6(c...
The American University Hotline: Manual for Trainers.
ERIC Educational Resources Information Center
Krieger, Howard; And Others
The philosophy, rationale, and specific training procedures of the American University Hotline are detailed in this trainer's manual. The manual provides a step-by-step discussion of training procedures implemented in a student-operated university hotline telephone service. The training package, widely disseminated over the past six years, has…
Laboratory procedures manual for the firefly luciferase assay for adenosine triphosphate (ATP)
NASA Technical Reports Server (NTRS)
Chappelle, E. W.; Picciolo, G. L.; Curtis, C. A.; Knust, E. A.; Nibley, D. A.; Vance, R. B.
1975-01-01
A manual on the procedures and instruments developed for the adenosine triphosphate (ATP) luciferase assay is presented. Data cover, laboratory maintenance, maintenance of bacterial cultures, bacteria measurement, reagents, luciferase procedures, and determination of microbal susceptibility to antibiotics.
A Procedure Manual for the Health Assistant Curriculum: Final Report.
ERIC Educational Resources Information Center
Pennsylvania State Univ., University Park.
A secondary education health assistant curriculum procedure manual for six occupational areas is presented. The six areas, the number of procedures described for each area, and an example procedure follow: nursing assistant, forty-six (assist patient to and from a wheelchair); home health assistant, six (baby holds); medical/dental offices…
Developing a Procedures Manual for Using the Innovacq 100 System Effectively and Efficiently.
ERIC Educational Resources Information Center
Cubberley, Carol
The installation of an automated acquisitions system, the Innovacq 100, demanded a review and revision of procedures in the Acquisitions Department of the University of Central Florida Library. This practicum report describes the process involved in developing the new procedures. Prior to installation, the old departmental procedures manual and…
Administrative Procedures for Small Institutions. Second Edition.
ERIC Educational Resources Information Center
Mathews, Keith W., Ed.
This guide offers sample administrative procedures and policies that can be used by small colleges and universities to prepare or revise administrative procedures manuals. The sample procedures and policies offered here have been compiled from a review of many manuals from many different institutions, and vary from the general to the specific.…
14 CFR 23.1585 - Operating procedures.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Operating procedures. 23.1585 Section 23.1585 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT... Information Airplane Flight Manual and Approved Manual Material § 23.1585 Operating procedures. (a) For all...
Code of Federal Regulations, 2010 CFR
2010-04-01
... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Manufactured home procedural and enforcement regulations and consumer manual requirements. 3280.3 Section 3280.3 Housing and Urban Development... consumer manual requirements. A manufacturer must comply with the requirements of this part 3280, part 3282...
Value Engineering. Technical Manual. School Facilities Development Procedures Manual.
ERIC Educational Resources Information Center
Washington Office of the State Superintendent of Public Instruction, Olympia.
Value Engineering (VE) is a cost-optimizing technique used to analyze design quality and cost-effectiveness. The application of VE procedures to the design and construction of school facilities has been adopted by the state of Washington. This technical manual provides guidance in developing the scope and applicability of VE to school projects; in…
Equations for Automotive-Transmission Performance
NASA Technical Reports Server (NTRS)
Chazanoff, S.; Aston, M. B.; Chapman, C. P.
1984-01-01
Curve-fitting procedure ensures high confidence levels. Threedimensional plot represents performance of small automatic transmission coasting in second gear. In equation for plot, PL power loss, S speed and T torque. Equations applicable to manual and automatic transmissions over wide range of speed, torque, and efficiency.
Utilization of blended learning to teach preclinical endodontics.
Maresca, Cristina; Barrero, Carlos; Duggan, Dereck; Platin, Enrique; Rivera, Eric; Hannum, Wallace; Petrola, Frank
2014-08-01
Blended learning (BL) is the integration of classroom learning with an online environment. The purpose of this study was to determine whether dental students who experienced BL in a preclinical endodontic course demonstrated better manual skills, conceptual knowledge, and learning experience compared to those experiencing traditional learning. All eighty-one students (100 percent) in a preclinical endodontics course agreed to participate and were assigned to either the traditional or BL group. A root canal procedure was used to determine the level of manual skills gained by each group. Pre- and post-intervention quizzes were given to all students to evaluate conceptual knowledge gained, and the students' perspectives on the methods were evaluated with a survey. The BL group scored better than the traditional group on the manual skills exercise at a statistically significant level (p=0.0067). There were no differences in the post-intervention quiz scores between the two groups, and the students' opinions were positive regarding BL. With BL, the students were able to learn and demonstrate dental skills at a high level.
Mital, A
1999-01-01
Manual handling of materials continues to be a hazardous activity, leading to a very significant number of severe overexertion injuries. Designing jobs that are within the physical capabilities of workers is one approach ergonomists have adopted to redress this problem. As a result, several job design procedures have been developed over the years. However, these procedures are limited to designing or evaluating only pure lifting jobs or only the lifting aspect of a materials handling job. This paper describes a general procedure that may be used to design or analyse materials handling jobs that involve several different kinds of activities (e.g. lifting, lowering, carrying, pushing, etc). The job design/analysis procedure utilizes an elemental approach (breaking the job into elements) and relies on databases provided in A Guide to Manual Materials Handling to compute associated risk factors. The use of the procedure is demonstrated with the help of two case studies.
40 CFR 63.550 - Recordkeeping and reporting requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... recordkeeping required as part of the practices described in the standard operating procedures manual for... part of the practices described in the standard operating procedures manual for baghouses required... period, including an explanation of the periods when the procedures outlined in the standard operating...
40 CFR 63.550 - Recordkeeping and reporting requirements.
Code of Federal Regulations, 2011 CFR
2011-07-01
... recordkeeping required as part of the practices described in the standard operating procedures manual for... part of the practices described in the standard operating procedures manual for baghouses required... period, including an explanation of the periods when the procedures outlined in the standard operating...
Miller, Daniel L; Roy, Sanjoy; Kassis, Edmund S; Yadalam, Sashi; Ramisetti, Sushama; Johnston, Stephen S
2018-05-01
Video-assisted thoracic surgery (VATS) lung resections are complex procedures with a critical role played by endoscopic staplers in the transection of vessels, bronchi, and lung tissue. This retrospective, observational study compared hospital resource use, costs, and complications of VATS lobectomy procedures for whom powered versus manual endoscopic surgical staplers were used. Patients ≥ 18 years of age undergoing elective VATS lobectomy during an inpatient admission from January 1, 2012 to September 30, 2016 were identified from the Premier Healthcare Database (first admission = index admission). Use of either powered or manual endoscopic staplers during the index admission was identified from hospital administrative records. Multivariable regression analyses adjusting for patient, hospital, and provider characteristics and hospital-level clustering were carried out to compare the following outcomes between the powered and manual stapler groups: hospital length of stay (LOS), operating room time (ORT), hospital costs, complications (bleeding and/or transfusions, air leak complications, pneumonia, and infection), discharge status, and 30-, 60-, and 90-day all-cause readmissions. The powered and manual stapler groups comprised 659 patients (mean age 66.1 years; 53.6% female) and 3100 patients (mean age 66.7 years; 54.8% female), respectively. In the multivariable analyses, the powered stapler group had shorter LOS (4.9 vs. 5.9 days, P < 0.001), lower total hospital costs ($23,841 vs. $26,052, P = 0.009), and lower rates of combined hemostasis complications (bleeding and/or transfusions; 8.5% vs. 16.0%, P < 0.001) and transfusions (5.4% vs. 10.9%, P = 0.002), compared with the manual stapler group. Other outcomes did not differ significantly between the study groups. Similar trends were observed in subanalyses comparing devices across predominant manufacturers in each group, and in subanalyses of patients with comorbid chronic obstructive pulmonary disease. In this analysis of VATS lobectomy procedures, powered staplers were associated with significant benefits with respect to selected types of hospital resource use, costs, and clinical outcomes when compared with manual staplers. Johnson & Johnson.
Surgical manual of the Korean Gynecologic Oncology Group: ovarian, tubal, and peritoneal cancers.
Jeon, Seob; Lee, Sung Jong; Lim, Myong Cheol; Song, Taejong; Bae, Jaeman; Kim, Kidong; Lee, Jung Yun; Kim, Sang Wun; Chang, Suk Joon; Lee, Jong Min
2017-01-01
The Surgery Treatment Modality Committee of the Korean Gynecologic Oncology Group has determined to develop a surgical manual to facilitate clinical trials and to improve communication between investigators by standardizing and precisely describing operating procedures. The literature on anatomic terminology, identification of surgical components, and surgical techniques were reviewed and discussed in depth to develop a surgical manual for gynecologic oncology. The surgical procedures provided here represent the minimum requirements for participating in a clinical trial. These procedures should be described in the operation record form, and the pathologic findings obtained from the procedures should be recorded in the pathologic report form. Here, we describe surgical procedure for ovarian, fallopian tubal, and peritoneal cancers.
Emerich, Katarzyna; Gazda, Ewa
2010-06-01
To be able to help at the site of the oro-facial injury, the majority of persons would turn to medical books and first-aid books to extend their knowledge. Proper information in first-aid textbooks and manuals should be the best way to present necessary procedures on how to act at the site of injury. The objective of this review is to report the quality of the knowledge presented in first-aid books and manuals. We carried out a review of first-aid international textbooks and manuals available in Medical University Libraries in Poland. The inclusion criteria were all manuals on first-aid that were written for medical staff and lay persons, and were published between 1969 and 2007. All texts were screened for dental trauma treatment recommendations. Our literature review has shown that among 45 first-aid textbooks and manuals only 19 mention procedures for use in case of dental trauma. Of those texts, only 13 detail the storage media for an avulsed tooth until replantation. Current, evidence-based, recommendations concerning first-aid procedures after dental trauma should be incorporated in forthcoming editions of first-aid textbooks and manuals. The guidance on procedures contained in reviewed texts is misleading.
Construction inspection manual of procedures
DOT National Transportation Integrated Search
2009-01-01
This manual provides highway construction personnel with relevant, practical information in order to perform accurate inspections and provide relevant construction procedural information for the various roadway and structures items of work. It is the...
ERIC Educational Resources Information Center
Davis, Kevin; Poston, George
This manual provides information on the enucleation procedure (removal of the eyes for organ banks). An introductory section focuses on the anatomy of the eye and defines each of the parts. Diagrams of the eye are provided. A list of enucleation materials follows. Other sections present outlines of (1) a sterile procedure; (2) preparation for eye…
32 CFR 634.35 - Chemical testing policies and procedures.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 32 National Defense 4 2010-07-01 2010-07-01 true Chemical testing policies and procedures. 634.35... Chemical testing policies and procedures. (a) Validity of chemical testing. Results of chemical testing are... instruction manual. (iv) Perform preventive maintenance as required by the instruction manual. (c) Chemical...
32 CFR 634.35 - Chemical testing policies and procedures.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 32 National Defense 4 2011-07-01 2011-07-01 false Chemical testing policies and procedures. 634.35... Chemical testing policies and procedures. (a) Validity of chemical testing. Results of chemical testing are... instruction manual. (iv) Perform preventive maintenance as required by the instruction manual. (c) Chemical...
32 CFR 634.35 - Chemical testing policies and procedures.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 32 National Defense 4 2012-07-01 2011-07-01 true Chemical testing policies and procedures. 634.35... Chemical testing policies and procedures. (a) Validity of chemical testing. Results of chemical testing are... instruction manual. (iv) Perform preventive maintenance as required by the instruction manual. (c) Chemical...
32 CFR 634.35 - Chemical testing policies and procedures.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 32 National Defense 4 2014-07-01 2013-07-01 true Chemical testing policies and procedures. 634.35... Chemical testing policies and procedures. (a) Validity of chemical testing. Results of chemical testing are... instruction manual. (iv) Perform preventive maintenance as required by the instruction manual. (c) Chemical...
32 CFR 634.35 - Chemical testing policies and procedures.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 32 National Defense 4 2013-07-01 2013-07-01 false Chemical testing policies and procedures. 634.35... Chemical testing policies and procedures. (a) Validity of chemical testing. Results of chemical testing are... instruction manual. (iv) Perform preventive maintenance as required by the instruction manual. (c) Chemical...
40 CFR 63.550 - Recordkeeping and reporting requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
..., corrective action, report, or record, according to § 63.10(b)(1). (b) The standard operating procedures... standard operating procedures manual for baghouses required under § 63.548(a). (4) Electronic records of... required as part of the practices described in the standard operating procedures manual required under § 63...
40 CFR 63.550 - Recordkeeping and reporting requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
..., corrective action, report, or record, according to § 63.10(b)(1). (b) The standard operating procedures... standard operating procedures manual for baghouses required under § 63.548(a). (4) Electronic records of... required as part of the practices described in the standard operating procedures manual required under § 63...
40 CFR 63.550 - Recordkeeping and reporting requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
..., corrective action, report, or record, according to § 63.10(b)(1). (b) The standard operating procedures... standard operating procedures manual for baghouses required under § 63.548(a). (4) Electronic records of... required as part of the practices described in the standard operating procedures manual required under § 63...
ERIC Educational Resources Information Center
Schoch, Robert
2002-01-01
Describes how the School District of Lancaster, Pennsylvania, implemented a districtwide quality-management system based on the Geneva-based International Standards Organization 9001, a major component of which is the documentation of procedures. Includes sections on implementation, procedure manuals, quality management, uniformity, formatting,…
Health Services Manual. Hicksville Public Schools.
ERIC Educational Resources Information Center
1987
This procedure manual describes the uniform procedures used by the Hicksville, New York School District's Health Services Program. Its objectives are to establish a uniform set of health services guidelines and procedures, to update all health forms, to maintain an awareness of the current changes in health laws that govern school districts, and…
Fleet logistics system : data administration plans and procedures manual
DOT National Transportation Integrated Search
1996-01-23
This manual provides data administration (DA) procedures for developers and maintainers of Coast Guard fleet logistics information systems. Fleet logistics includes a community of supply, logistics, maintenance, and shipboard functions. The informati...
Caltrans : construction manual
DOT National Transportation Integrated Search
2009-08-01
Caltrans intends this manual as a resource for all personnel engaged in contract administration. The manual establishes policies and procedures for the construction phase of Caltrans projects. However, this manual is not a contract document. It impos...
High-occupancy vehicle guidelines for planning, design and operations
DOT National Transportation Integrated Search
2003-08-01
These guidelines are not intended to supersede Caltrans : Transportation Planning Manual, Project Development : Procedures Manual, Highway Design Manual, Manual : on Uniform Traffic Control Devices (MUTCD) and : California Supplement to the MUTCD ...
WIPP waste characterization program sampling and analysis guidance manual
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1991-01-01
The Waste Isolation Pilot Plant (WIPP) Waste Characterization Program Sampling and Analysis Guidance Manual (Guidance Manual) provides a unified source of information on the sampling and analytical techniques that enable Department of Energy (DOE) facilities to comply with the requirements established in the current revision of the Quality Assurance Program Plan (QAPP) for the WIPP Experimental-Waste Characterization Program (the Program). This Guidance Manual includes all of the sampling and testing methodologies accepted by the WIPP Project Office (DOE/WPO) for use in implementing the Program requirements specified in the QAPP. This includes methods for characterizing representative samples of transuranic (TRU) wastesmore » at DOE generator sites with respect to the gas generation controlling variables defined in the WIPP bin-scale and alcove test plans, as well as waste container headspace gas sampling and analytical procedures to support waste characterization requirements under the WIPP test program and the Resource Conservation and Recovery Act (RCRA). The procedures in this Guidance Manual are comprehensive and detailed and are designed to provide the necessary guidance for the preparation of site specific procedures. The use of these procedures is intended to provide the necessary sensitivity, specificity, precision, and comparability of analyses and test results. The solutions to achieving specific program objectives will depend upon facility constraints, compliance with DOE Orders and DOE facilities' operating contractor requirements, and the knowledge and experience of the TRU waste handlers and analysts. With some analytical methods, such as gas chromatography/mass spectrometry, the Guidance Manual procedures may be used directly. With other methods, such as nondestructive/destructive characterization, the Guidance Manual provides guidance rather than a step-by-step procedure.« less
ERIC Educational Resources Information Center
Patterson, Lotsee
This manual resulted from a 2-year project to improve, develop, and expand public library and information services to American Indians and Alaska Natives. Designed to serve as a guide for tribal and community librarians who may lack professional training, the manual offers descriptions of library services, procedures, and management issues. An…
ERIC Educational Resources Information Center
Elias, N. C.; Goyos, C.; Saunders, M.; Saunders, R.
2008-01-01
The objective of this study was to teach manual signs through an automated matching-to-sample procedure and to test for the emergence of new conditional relations and imitative behaviors. Seven adults with mild to severe mental retardation participated. Four were also hearing impaired. Relations between manual signs (set A) and pictures (set B)…
Assessment of Auditory Functioning of Deaf-Blind Multihandicapped Children.
ERIC Educational Resources Information Center
Kukla, Deborah; Connolly, Theresa Thomas
The manual describes a procedure to assess to what extent a deaf-blind multiply handicapped student uses his residual hearing in the classroom. Six levels of auditory functioning (awareness/reflexive, attention/alerting, localization, auditory discrimination, recognition, and comprehension) are analyzed, and assessment activities are detailed for…
Doi, Kentaro; Tanaka, Shinsuke; Iida, Hideo; Eto, Hitomi; Kato, Harunosuke; Aoi, Noriyuki; Kuno, Shinichiro; Hirohi, Toshitsugu; Yoshimura, Kotaro
2013-11-01
The heterogeneous stromal vascular fraction (SVF), containing adipose-derived stem/progenitor cells (ASCs), can be easily isolated through enzymatic digestion of aspirated adipose tissue. In clinical settings, however, strict control of technical procedures according to standard operating procedures and validation of cell-processing conditions are required. Therefore, we evaluated the efficiency and reliability of an automated system for SVF isolation from adipose tissue. SVF cells, freshly isolated using the automated procedure, showed comparable number and viability to those from manual isolation. Flow cytometric analysis confirmed an SVF cell composition profile similar to that after manual isolation. In addition, the ASC yield after 1 week in culture was also not significantly different between the two groups. Our clinical study, in which SVF cells isolated with the automated system were transplanted with aspirated fat tissue for soft tissue augmentation/reconstruction in 42 patients, showed satisfactory outcomes with no serious side-effects. Taken together, our results suggested that the automated isolation system is as reliable a method as manual isolation and may also be useful in clinical settings. Automated isolation is expected to enable cell-based clinical trials in small facilities with an aseptic room, without the necessity of a good manufacturing practice-level cell processing area. Copyright © 2012 John Wiley & Sons, Ltd.
NASA Astrophysics Data System (ADS)
Barlow, Steven J.
1986-09-01
The Air Force needs a better method of designing new and retrofit heating, ventilating and air conditioning (HVAC) control systems. Air Force engineers currently use manual design/predict/verify procedures taught at the Air Force Institute of Technology, School of Civil Engineering, HVAC Control Systems course. These existing manual procedures are iterative and time-consuming. The objectives of this research were to: (1) Locate and, if necessary, modify an existing computer-based method for designing and analyzing HVAC control systems that is compatible with the HVAC Control Systems manual procedures, or (2) Develop a new computer-based method of designing and analyzing HVAC control systems that is compatible with the existing manual procedures. Five existing computer packages were investigated in accordance with the first objective: MODSIM (for modular simulation), HVACSIM (for HVAC simulation), TRNSYS (for transient system simulation), BLAST (for building load and system thermodynamics) and Elite Building Energy Analysis Program. None were found to be compatible or adaptable to the existing manual procedures, and consequently, a prototype of a new computer method was developed in accordance with the second research objective.
Welch, S J; Holborn, S W
1988-01-01
A brief training manual was developed for the purpose of teaching child-care workers to contingency contract with delinquent youths living in residential care facilities. The manual was designed to require minimal supplementary training by a professional. In Experiment 1 a multiple baseline design was used to assess the effect of the manual on 4 child-care workers' contract negotiation and writing behaviors. Experiment 2 consisted of four A-B systematic replications. Behaviors were assessed within the context of analogue training simulations and generalization tests with delinquent youths. Results from the analogue simulations indicated that the manual was successful in increasing both types of behaviors to a level of proficiency that equaled or surpassed that of behaviorally trained graduate students, and results from the generalization tests indicated that the child-care workers were able to apply their newly acquired contracting skills with delinquent youths. Procedural reliability varied across child-care workers, but was usually high.
Welch, S J; Holborn, S W
1988-01-01
A brief training manual was developed for the purpose of teaching child-care workers to contingency contract with delinquent youths living in residential care facilities. The manual was designed to require minimal supplementary training by a professional. In Experiment 1 a multiple baseline design was used to assess the effect of the manual on 4 child-care workers' contract negotiation and writing behaviors. Experiment 2 consisted of four A-B systematic replications. Behaviors were assessed within the context of analogue training simulations and generalization tests with delinquent youths. Results from the analogue simulations indicated that the manual was successful in increasing both types of behaviors to a level of proficiency that equaled or surpassed that of behaviorally trained graduate students, and results from the generalization tests indicated that the child-care workers were able to apply their newly acquired contracting skills with delinquent youths. Procedural reliability varied across child-care workers, but was usually high. PMID:3225253
Surgical manual of the Korean Gynecologic Oncology Group: ovarian, tubal, and peritoneal cancers
2017-01-01
The Surgery Treatment Modality Committee of the Korean Gynecologic Oncology Group has determined to develop a surgical manual to facilitate clinical trials and to improve communication between investigators by standardizing and precisely describing operating procedures. The literature on anatomic terminology, identification of surgical components, and surgical techniques were reviewed and discussed in depth to develop a surgical manual for gynecologic oncology. The surgical procedures provided here represent the minimum requirements for participating in a clinical trial. These procedures should be described in the operation record form, and the pathologic findings obtained from the procedures should be recorded in the pathologic report form. Here, we describe surgical procedure for ovarian, fallopian tubal, and peritoneal cancers. PMID:27670260
MetaMapping the nursing procedure manual.
Peace, Jane; Brennan, Patricia Flatley
2006-01-01
Nursing procedure manuals are an important resource for practice, but ensuring that the correct procedure can be located when needed is an ongoing challenge. This poster presents an approach used to automatically index nursing procedures with standardized nursing terminology. Although indexing yielded a low number of mappings, examination of successfully mapped terms, incorrect mappings, and unmapped terms reveals important information about the reasons automated indexing fails.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-25
... Practice Manual. Revising the regulation to reflect current practice will provide clarity to practitioners... date of publication in the Federal Register. The sixty days between the date of publication and the... standing orders, and the Board's Practice Manual. The amendments to the rule clarify review procedures for...
Linking Project Procedure Manual for Using Dumb-Barcode Linking on GEAC.
ERIC Educational Resources Information Center
Condron, Lyn
This procedure manual is designed to assist cataloging staff members at a university library through the 10-step process of barcoding and linking books classified by the Library of Congress system to the library's GEAC online computer system. A brief introduction provides background information on the project. The procedures involved in each…
ERIC Educational Resources Information Center
Irvin, Donald E.; Galey, Stephen B.
This manual represents an attempt to develop a model and procedures for implementing career planning and placement assistance services in Minnesota high schools. The procedures described were developed for and tested in four participating high schools of different sizes, administrative structures, and geographic locations. Divided into seven…
Nii, Kouhei; Nakai, Kanji; Tsutsumi, Masanori; Aikawa, Hiroshi; Iko, Minoru; Sakamoto, Kimiya; Mitsutake, Takafumi; Eto, Ayumu; Hanada, Hayatsura; Kazekawa, Kiyoshi
2015-01-01
We investigated the incidence of embolic protection device retrieval difficulties at carotid artery stenting (CAS) with a closed-cell stent and demonstrated the usefulness of a manual carotid compression assist technique. Between July 2010 and October 2013, we performed 156 CAS procedures using self-expandable closed-cell stents. All procedures were performed with the aid of a filter design embolic protection device. We used FilterWire EZ in 118 procedures and SpiderFX in 38 procedures. The embolic protection device was usually retrieved by the accessory retrieval sheath after CAS. We applied a manual carotid compression technique when it was difficult to navigate the retrieval sheath through the deployed stent. We compared clinical outcomes in patients where simple retrieval was possible with patients where the manual carotid compression assisted technique was used for retrieval. Among the 156 CAS procedures, we encountered 12 (7.7%) where embolic protection device retrieval was hampered at the proximal stent terminus. Our manual carotid compression technique overcame this difficulty without eliciting neurologic events, artery dissection, or stent deformity. In patients undergoing closed-cell stent placement, embolic protection device retrieval difficulties may be encountered at the proximal stent terminus. Manual carotid compression assisted retrieval is an easy, readily available solution to overcome these difficulties. Copyright © 2015 National Stroke Association. Published by Elsevier Inc. All rights reserved.
Surface Environmental Surveillance Procedures Manual
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hanf, RW; Dirkes, RL
1990-02-01
This manual establishes the procedures for the collection of environmental samples and the performance of radiation surveys and other field measurements. Responsibilities are defined for those personnel directly involved in the collection of samples and the performance of field measurements.
ERIC Educational Resources Information Center
McPhee, C.; Bielick, S.; Masterton, M.; Flores, L.; Parmer, R.; Amchin, S.; Stern, S.; McGowan, H.
2015-01-01
The 2012 National Household Education Surveys Program (NHES:2012) Data File User's Manual provides documentation and guidance for users of the NHES:2012 data files. The manual provides information about the purpose of the study, the sample design, data collection procedures, data processing procedures, response rates, imputation, weighting and…
Competencies for Articulation: Procedures Manual.
ERIC Educational Resources Information Center
Southeast Community Coll., Lincoln, NE.
Competencies for Articulation materials have been developed by public schools, an educational district, and a community college in Nebraska to help vocational education students progress from one level of educational training to another and to employment. Their progress is to be measured by "competencies," each of which has three parts:…
Airport-Noise Levels and Annoyance Model (ALAMO) system's reference manual
NASA Technical Reports Server (NTRS)
Deloach, R.; Donaldson, J. L.; Johnson, M. J.
1986-01-01
The airport-noise levels and annoyance model (ALAMO) is described in terms of the constituent modules, the execution of ALAMO procedure files, necessary for system execution, and the source code documentation associated with code development at Langley Research Center. The modules constituting ALAMO are presented both in flow graph form, and through a description of the subroutines and functions that comprise them.
Flexible pavement overlay design procedures. Volume 2: User manual
NASA Astrophysics Data System (ADS)
Majidzadeh, K.; Ilves, G. J.
1981-08-01
This user manual outlines a procedure for the design of asphaltic concrete overlays on existing asphaltic concrete pavement surfaces. It is intended as a guide to the user on the type and form of information required as input to the procedure and contains all elements necessary for the user to prepare designs for flexible pavement overlays.
ERIC Educational Resources Information Center
Lauritzen, Paul; Friedman, Stephen
This manual presents procedures for collecting data to project personnel needs in the field of special education, addressing in part the Comprehensive System of Personnel Development requirements of Public Law 94-142. Implementation of the procedures identifies: areas of education that show need for additional teachers as well as areas of surplus;…
Code of Federal Regulations, 2011 CFR
2011-10-01
... authority under 47 U.S.C. 901 et seq. and Executive Order 12046 (March 27, 1978). (b) The federal agencies... Regulations and Procedures for Federal Radio Frequency Management. 300.1 Section 300.1 Telecommunication... AND PROCEDURES FOR FEDERAL RADIO FREQUENCY MANAGEMENT § 300.1 Incorporation by reference of the Manual...
Code of Federal Regulations, 2010 CFR
2010-10-01
... authority under 47 U.S.C. 901 et seq. and Executive Order 12046 (March 27, 1978). (b) The federal agencies... Regulations and Procedures for Federal Radio Frequency Management. 300.1 Section 300.1 Telecommunication... AND PROCEDURES FOR FEDERAL RADIO FREQUENCY MANAGEMENT § 300.1 Incorporation by reference of the Manual...
Code of Federal Regulations, 2014 CFR
2014-10-01
... authority under 47 U.S.C. 901 et seq. and Executive Order 12046 (March 27, 1978). (b) The Federal agencies... Regulations and Procedures for Federal Radio Frequency Management. 300.1 Section 300.1 Telecommunication... AND PROCEDURES FOR FEDERAL RADIO FREQUENCY MANAGEMENT § 300.1 Incorporation by reference of the Manual...
Code of Federal Regulations, 2013 CFR
2013-10-01
... authority under 47 U.S.C. 901 et seq. and Executive Order 12046 (March 27, 1978). (b) The Federal agencies... Regulations and Procedures for Federal Radio Frequency Management. 300.1 Section 300.1 Telecommunication... AND PROCEDURES FOR FEDERAL RADIO FREQUENCY MANAGEMENT § 300.1 Incorporation by reference of the Manual...
Code of Federal Regulations, 2012 CFR
2012-10-01
... authority under 47 U.S.C. 901 et seq. and Executive Order 12046 (March 27, 1978). (b) The federal agencies... Regulations and Procedures for Federal Radio Frequency Management. 300.1 Section 300.1 Telecommunication... AND PROCEDURES FOR FEDERAL RADIO FREQUENCY MANAGEMENT § 300.1 Incorporation by reference of the Manual...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cornelis, F.; Takaki, H.; Laskhmanan, M.
PurposeTo compare CT fluoroscopy-guided manual and CT-guided robotic positioning system (RPS)-assisted needle placement by experienced IR physicians to targets in swine liver.Materials and MethodsManual and RPS-assisted needle placement was performed by six experienced IR physicians to four 5 mm fiducial seeds placed in swine liver (n = 6). Placement performance was assessed for placement accuracy, procedure time, number of confirmatory scans, needle manipulations, and procedure radiation dose. Intra-modality difference in performance for each physician was assessed using paired t test. Inter-physician performance variation for each modality was analyzed using Kruskal–Wallis test.ResultsPaired comparison of manual and RPS-assisted placements to a target by the samemore » physician indicated accuracy outcomes was not statistically different (manual: 4.53 mm; RPS: 4.66 mm; p = 0.41), but manual placement resulted in higher total radiation dose (manual: 1075.77 mGy/cm; RPS: 636.4 mGy/cm; p = 0.03), required more confirmation scans (manual: 6.6; RPS: 1.6; p < 0.0001) and needle manipulations (manual: 4.6; RPS: 0.4; p < 0.0001). Procedure time for RPS was longer than manual placement (manual: 6.12 min; RPS: 9.7 min; p = 0.0003). Comparison of inter-physician performance during manual placement indicated significant differences in the time taken to complete placements (p = 0.008) and number of repositions (p = 0.04) but not in other study measures (p > 0.05). Comparison of inter-physician performance during RPS-assisted placement suggested statistically significant differences in procedure time (p = 0.02) and not in other study measures (p > 0.05).ConclusionsCT-guided RPS-assisted needle placement reduced radiation dose, number of confirmatory scans, and needle manipulations when compared to manual needle placement by experienced IR physicians, with equivalent accuracy.« less
Thode, Aaron M; Kim, Katherine H; Blackwell, Susanna B; Greene, Charles R; Nations, Christopher S; McDonald, Trent L; Macrander, A Michael
2012-05-01
An automated procedure has been developed for detecting and localizing frequency-modulated bowhead whale sounds in the presence of seismic airgun surveys. The procedure was applied to four years of data, collected from over 30 directional autonomous recording packages deployed over a 280 km span of continental shelf in the Alaskan Beaufort Sea. The procedure has six sequential stages that begin by extracting 25-element feature vectors from spectrograms of potential call candidates. Two cascaded neural networks then classify some feature vectors as bowhead calls, and the procedure then matches calls between recorders to triangulate locations. To train the networks, manual analysts flagged 219 471 bowhead call examples from 2008 and 2009. Manual analyses were also used to identify 1.17 million transient signals that were not whale calls. The network output thresholds were adjusted to reject 20% of whale calls in the training data. Validation runs using 2007 and 2010 data found that the procedure missed 30%-40% of manually detected calls. Furthermore, 20%-40% of the sounds flagged as calls are not present in the manual analyses; however, these extra detections incorporate legitimate whale calls overlooked by human analysts. Both manual and automated methods produce similar spatial and temporal call distributions.
The Relationship between Serum Vitamin D Levels and Spinal Fusion Success: A Quantitative Analysis
Metzger, Melodie F.; Kanim, Linda E.; Zhao, Li; Robinson, Samuel T.; Delamarter, Rick B.
2015-01-01
Study Design An in vivo dosing study of vitamin D in a rat posterolateral spinal fusion model with autogenous bone grafting. Rats randomized to four levels of Vitamin D adjusted rat chow, longitudinal serum validation, surgeons/observers blinded to dietary conditions, and rats followed prospectively for fusion endpoint. Objective To assess the impact of dietary and serum levels of Vitamin D on fusion success, consolidation of fusion mass, and biomechanical stiffness after posterolateral spinal fusion procedure. Summary of Background Data Metabolic risk factors, including vitamin D insufficiency, are often overlooked by spine surgeons. Currently there are no published data on the causal effect of insufficient or deficient vitamin D levels on the success of establishing solid bony union after a spinal fusion procedure. Methods 50 rats were randomized to four experimentally controlled rat chow diets: normal control, vitamin D-deficient, vitamin-D insufficient, and a non-toxic high dose of vitamin D, four weeks prior to surgery and maintained post-surgery until sacrifice. Serum levels of 25(OH)D were determined at surgery and sacrifice using radioimmunoassay. Posterolateral fusion surgery with tail autograft was performed. Rats were sacrificed 12 weeks post-operatively and fusion was evaluated via manual palpation, high resolution radiographs, μCT, and biomechanical testing. Results Serum 25(OH)D and calcium levels were significantly correlated with vitamin-D adjusted chow (p<0.001). There was a dose dependent relationship between vitamin D adjusted chow and manual palpation fusion with greatest differences found in measures of radiographic density between high and deficient vitamin D (p<0.05). Adequate levels of vitamin D (high and normal control) yielded stiffer fusion than inadequate levels (insufficient and deficient) (p<0.05). Conclusions Manual palpation fusion rates increased with supplementation of dietary vitamin D. Biomechanical stiffness, bone volume and density were also positively-related to vitamin D, and calcium. PMID:25627287
Groundwater technical procedures of the U.S. Geological Survey
Cunningham, William L.; Schalk, Charles W.
2011-01-01
A series of groundwater technical procedures documents (GWPDs) has been released by the U.S. Geological Survey, Water-Resources Discipline, for general use by the public. These technical procedures were written in response to the need for standardized technical procedures of many aspects of groundwater science, including site and measuring-point establishment, measurement of water levels, and measurement of well discharge. The techniques are described in the GWPDs in concise language and are accompanied by necessary figures and tables derived from cited manuals, reports, and other documents. Because a goal of this series of procedures is to remain current with the state of the science, and because procedures change over time, this report is released in an online format only. As new procedures are developed and released, they will be linked to this document.
40 CFR 63.549 - Notification requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... shall submit the fugitive dust control standard operating procedures manual required under § 63.545(a) and the standard operating procedures manual for baghouses required under § 63.548(a) to the... (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission...
40 CFR 63.549 - Notification requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
... operating procedures manual required under § 63.545(a) and the standard operating procedures manual for... (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards For Hazardous Air Pollutants From Secondary Lead Smelting § 63.549 Notification requirements. (a...
40 CFR 63.549 - Notification requirements.
Code of Federal Regulations, 2011 CFR
2011-07-01
... shall submit the fugitive dust control standard operating procedures manual required under § 63.545(a) and the standard operating procedures manual for baghouses required under § 63.548(a) to the... (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission...
40 CFR 63.549 - Notification requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
... operating procedures manual required under § 63.545(a) and the standard operating procedures manual for... (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards For Hazardous Air Pollutants From Secondary Lead Smelting § 63.549 Notification requirements. (a...
40 CFR 63.549 - Notification requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
... operating procedures manual required under § 63.545(a) and the standard operating procedures manual for... (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards For Hazardous Air Pollutants From Secondary Lead Smelting § 63.549 Notification requirements. (a...
Guide for Developing and Evaluating an SFAR 36 Engineering Procedures Manual
DOT National Transportation Integrated Search
1997-05-22
This advisory circular (AC) sets forth an acceptable means, but not the only : means, for developing and evaluating a 14 Code of Federal Regulations (14CFR) : Special Federal Aviaton Regulation (SFAR)36 engineering procedures manual. As : such, the t...
Improvement of the insertion axis for cochlear implantation with a robot-based system.
Torres, Renato; Kazmitcheff, Guillaume; De Seta, Daniele; Ferrary, Evelyne; Sterkers, Olivier; Nguyen, Yann
2017-02-01
It has previously reported that alignment of the insertion axis along the basal turn of the cochlea was depending on surgeon' experience. In this experimental study, we assessed technological assistances, such as navigation or a robot-based system, to improve the insertion axis during cochlear implantation. A preoperative cone beam CT and a mastoidectomy with a posterior tympanotomy were performed on four temporal bones. The optimal insertion axis was defined as the closest axis to the scala tympani centerline avoiding the facial nerve. A neuronavigation system, a robot assistance prototype, and software allowing a semi-automated alignment of the robot were used to align an insertion tool with an optimal insertion axis. Four procedures were performed and repeated three times in each temporal bone: manual, manual navigation-assisted, robot-based navigation-assisted, and robot-based semi-automated. The angle between the optimal and the insertion tool axis was measured in the four procedures. The error was 8.3° ± 2.82° for the manual procedure (n = 24), 8.6° ± 2.83° for the manual navigation-assisted procedure (n = 24), 5.4° ± 3.91° for the robot-based navigation-assisted procedure (n = 24), and 3.4° ± 1.56° for the robot-based semi-automated procedure (n = 12). A higher accuracy was observed with the semi-automated robot-based technique than manual and manual navigation-assisted (p < 0.01). Combination of a navigation system and a manual insertion does not improve the alignment accuracy due to the lack of friendly user interface. On the contrary, a semi-automated robot-based system reduces both the error and the variability of the alignment with a defined optimal axis.
Choi, Chel Hun; Chun, Yi Kyeong
2017-01-01
The Surgery Treatment Modality Committee of the Korean Gynecologic Oncologic Group (KGOG) has determined to develop a surgical manual to facilitate clinical trials and to improve communication between investigators by standardizing and precisely describing operating procedures. The literature on anatomic terminology, identification of surgical components, and surgical techniques were reviewed and discussed in depth to develop a surgical manual for gynecologic oncology. The surgical procedures provided here represent the minimum requirements for participating in a clinical trial. These procedures should be described in the operation record form, and the pathologic findings obtained from the procedures should be recorded in the pathologic report form. Here, we focused on radical hysterectomy and lymphadenectomy, and we developed a KGOG classification for those conditions. PMID:27670259
Lee, Maria; Choi, Chel Hun; Chun, Yi Kyeong; Kim, Yun Hwan; Lee, Kwang Beom; Lee, Shin Wha; Shim, Seung Hyuk; Song, Yong Jung; Roh, Ju Won; Chang, Suk Joon; Lee, Jong Min
2017-01-01
The Surgery Treatment Modality Committee of the Korean Gynecologic Oncologic Group (KGOG) has determined to develop a surgical manual to facilitate clinical trials and to improve communication between investigators by standardizing and precisely describing operating procedures. The literature on anatomic terminology, identification of surgical components, and surgical techniques were reviewed and discussed in depth to develop a surgical manual for gynecologic oncology. The surgical procedures provided here represent the minimum requirements for participating in a clinical trial. These procedures should be described in the operation record form, and the pathologic findings obtained from the procedures should be recorded in the pathologic report form. Here, we focused on radical hysterectomy and lymphadenectomy, and we developed a KGOG classification for those conditions.
Effect of raw materials and hardening process on hardness of manually forged knife
NASA Astrophysics Data System (ADS)
Balkhaya, Suwarno
2017-06-01
Knives are normally made by forging process either using a machine or traditional method by means of hammering process. This present work was conducted to study the effects of steel raw materials and hardening process on the hardness of manually forged knives. The knife samples were made by traditional hammering (forging) process done by local blacksmith. Afterward, the samples were heat treated with two different hardening procedures, the first was based on the blacksmith procedure and the second was systematically done at the laboratory. The forging was done in the temperature ranged between 900-950°C, while the final temperature ranged between 650-675°C. The results showed that knives made of spring steel and heat treated in simulated condition at the laboratory obtained higher level of hardness, i.e. 62 HRC. In general, knives heat treated by local blacksmith had lower level of hardness that those obtained from simulated condition. Therefore, we concluded that the traditional knife quality in term of hardness can be improved by optimizing the heat treatment schedule.
NASA Technical Reports Server (NTRS)
Gumbert, C. R.
1985-01-01
A transonic Wall-Interference Assessment/Correction (WIAC) procedure has been developed and verified for the 8- by 24-inch airfoil test section of the Langley 0.3-m Transonic Cryogenic Tunnel. This report is a user's manual for the correction procedure. It includes a listing of the computer procedure file as well as input for and results from a step-by-step sample case.
Levesque, Eric; Hoti, Emir; de La Serna, Sofia; Habouchi, Houssam; Ichai, Philippe; Saliba, Faouzi; Samuel, Didier; Azoulay, Daniel
2013-03-01
In the French healthcare system, the intensive care budget allocated is directly dependent on the activity level of the center. To evaluate this activity level, it is necessary to code the medical diagnoses and procedures performed on Intensive Care Unit (ICU) patients. The aim of this study was to evaluate the effects of using an Intensive Care Information System (ICIS) on the incidence of coding errors and its impact on the ICU budget allocated. Since 2005, the documentation on and monitoring of every patient admitted to our ICU has been carried out using an ICIS. However, the coding process was performed manually until 2008. This study focused on two periods: the period of manual coding (year 2007) and the period of computerized coding (year 2008) which covered a total of 1403 ICU patients. The time spent on the coding process, the rate of coding errors (defined as patients missed/not coded or wrongly identified as undergoing major procedure/s) and the financial impact were evaluated for these two periods. With computerized coding, the time per admission decreased significantly (from 6.8 ± 2.8 min in 2007 to 3.6 ± 1.9 min in 2008, p<0.001). Similarly, a reduction in coding errors was observed (7.9% vs. 2.2%, p<0.001). This decrease in coding errors resulted in a reduced difference between the potential and real ICU financial supplements obtained in the respective years (€194,139 loss in 2007 vs. a €1628 loss in 2008). Using specific computer programs improves the intensive process of manual coding by shortening the time required as well as reducing errors, which in turn positively impacts the ICU budget allocation. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.
75 FR 3756 - The National Environmental Policy Act Procedures Manual
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-22
... DEPARTMENT OF THE INTERIOR National Indian Gaming Commission The National Environmental Policy Act Procedures Manual AGENCY: National Indian Gaming Commission. ACTION: Notice of reopening of comment period... Gaming Commission, 1441 L Street, NW., Suite 9100, Washington, DC 20005; (2) by hand delivery to...
75 FR 13139 - The National Environmental Policy Act Procedures Manual
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-18
... NATIONAL INDIAN GAMING COMMISSION The National Environmental Policy Act Procedures Manual AGENCY: The National Indian Gaming Commission. ACTION: Notice of reopening of comment period. SUMMARY: This... Indian Gaming Commission, 1441 L Street, NW., Suite 9100, Washington, DC 20005; (2) by hand delivery to...
Training Procedure Manual for the Mentally Retarded.
ERIC Educational Resources Information Center
Dustin, Josephine; And Others
Presented is a training procedure manual for institutionalized moderately, severely, and profoundly retarded persons. Teaching activities are suggested for the following skill areas: motor development and awareness (including sensory stimulation, mat skills, and music and basic rhythm); toileting; eating skills (such as straw sipping and table…
Search the Division of Finance site DOF State of Alaska Finance Home Content Area Accounting Charge Cards Administrative Manual Table of Contents Contains State of Alaska accounting/payroll policies and information clarifying accounting and payroll procedures. Policies are carried out through standard statewide procedures
40 CFR 63.1548 - Notification requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... submit the fugitive dust control standard operating procedures manual required under § 63.1544(a) and the standard operating procedures manual for baghouses required under § 63.1547(a) to the Administrator or... (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission...
40 CFR 63.1548 - Notification requirements.
Code of Federal Regulations, 2011 CFR
2011-07-01
... submit the fugitive dust control standard operating procedures manual required under § 63.1544(a) and the standard operating procedures manual for baghouses required under § 63.1547(a) to the Administrator or... (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission...
Regulations and Procedures Manual
DOE Office of Scientific and Technical Information (OSTI.GOV)
Young, Lydia
The purpose of the Regulations and Procedures Manual (RPM) is to provide Laboratory personnel with a reference to University and Lawrence Berkeley National Laboratory policies and regulations by outlining the normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory departments. Much of the information in this manual has been condensed from detail provided in Laboratory procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. The sections on personnel apply only to employees who are not represented by unions. Personnel policies pertainingmore » to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the department responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which department should be called, please contact the Associate Laboratory Director of Operations.« less
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 5 2012-10-01 2012-10-01 false Cargo Record Book and Approved Procedures and... Cargo Record Book and Approved Procedures and Arrangements Manual: Categories A, B, C, and D. (a) Unless... carry NLS cargo, a ship must have— (1) If U.S., a Cargo Record Book published by the Coast Guard (OMB...
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 5 2013-10-01 2013-10-01 false Cargo Record Book and Approved Procedures and... Cargo Record Book and Approved Procedures and Arrangements Manual: Categories A, B, C, and D. (a) Unless... carry NLS cargo, a ship must have— (1) If U.S., a Cargo Record Book published by the Coast Guard (OMB...
Asphalt pavement inspector's manual
DOT National Transportation Integrated Search
2002-07-01
The information currently available on asphalt paving would fill a small library. Furthermore, DOT&PF's Alaska Construction Manual describes procedures for the Department's staff to use on all aspects of construction projects. This manual draws on th...
Best practices procurement manual
DOT National Transportation Integrated Search
2002-08-01
This Manual provides recipients of Federal Transit Administration (FTA) funds suggestions on conducting third party procurements to assist them in meeting the standards of FTA Circular 4220.1D (the Circular). The Manual consists of suggested procedur...
42 CFR 401.112 - Availability of administrative staff manuals.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 42 Public Health 2 2014-10-01 2014-10-01 false Availability of administrative staff manuals. 401... § 401.112 Availability of administrative staff manuals. All CMS administrative staff manuals and instructions to staff personnel which contain policies, procedures, or interpretations that affect the public...
42 CFR 401.112 - Availability of administrative staff manuals.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 42 Public Health 2 2013-10-01 2013-10-01 false Availability of administrative staff manuals. 401... § 401.112 Availability of administrative staff manuals. All CMS administrative staff manuals and instructions to staff personnel which contain policies, procedures, or interpretations that affect the public...
42 CFR 401.112 - Availability of administrative staff manuals.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 42 Public Health 2 2011-10-01 2011-10-01 false Availability of administrative staff manuals. 401... § 401.112 Availability of administrative staff manuals. All CMS administrative staff manuals and instructions to staff personnel which contain policies, procedures, or interpretations that affect the public...
42 CFR 401.112 - Availability of administrative staff manuals.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 2 2010-10-01 2010-10-01 false Availability of administrative staff manuals. 401... § 401.112 Availability of administrative staff manuals. All CMS administrative staff manuals and instructions to staff personnel which contain policies, procedures, or interpretations that affect the public...
42 CFR 401.112 - Availability of administrative staff manuals.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 42 Public Health 2 2012-10-01 2012-10-01 false Availability of administrative staff manuals. 401... § 401.112 Availability of administrative staff manuals. All CMS administrative staff manuals and instructions to staff personnel which contain policies, procedures, or interpretations that affect the public...
49 CFR 192.605 - Procedural manual for operations, maintenance, and emergencies.
Code of Federal Regulations, 2010 CFR
2010-10-01
... operations and maintenance activities are conducted. (b) Maintenance and normal operations. The manual... personnel to determine the effectiveness, and adequacy of the procedures used in normal operation and... or flow rate outside normal operating limits; (iii) Loss of communications; (iv) Operation of any...
Interlibrary Loan Communications Subsystem: Users Manual.
ERIC Educational Resources Information Center
OCLC Online Computer Library Center, Inc., Dublin, OH.
The OCLC Interlibrary Loan (ILL) Communications Subsystem provides participating libraries with on-line control of ILL transactions. This user manual includes a glossary of terms related to the procedures in using the system. Sections describe computer entry, searching, loan request form, loan response form, ILL procedures, the special message…
Hair Transplantation Controversies.
Avram, Marc R; Finney, Robert; Rogers, Nicole
2017-11-01
Hair transplant surgery creates consistently natural appearing transplanted hair for men. It is increasingly popular procedure to restore natural growing hair for men with hair loss. To review some current controversies in hair transplant surgery. Review of the English PubMed literature and specialty literature in hair transplant surgery. Some of the controversies in hair transplant surgery include appropriate donor harvesting technique including elliptical donor harvesting versus follicular unit extraction whether manual versus robotic, the role of platelet-rich plasma and low-level light surgery in hair transplant surgery. Hair transplant surgery creates consistently natural appearing hair. As with all techniques, there are controversies regarding the optimal method for performing the procedure. Some of the current controversies in hair transplant surgery include optimal donor harvesting techniques, elliptical donor harvesting versus follicular unit extraction, the role of low-level light therapy and the platelet-rich plasma therapy in the procedure. Future studies will further clarify their role in the procedure.
Lee, Edward W; Tucker, Nancy A
2007-01-01
To evaluate the pain associated with local infiltration of the eyelid, using a microprocessor-controlled delivery system (CompuMed, using the Wand), as compared with traditional manual syringe infiltration technique. A randomized clinical trial of 30 patients undergoing minor eyelid surgical procedures was performed. Fifteen patients were injected by use of the CompuMed system and 15 patients were injected by the traditional manual syringe technique. The severity of pain was recorded from each patient by using a visual analog scale (0 to 10). The duration of pain experienced by the patient was also recorded. The mean pain level reported was 1.5 in the Wand group and 3.2 in the syringe group (p < 0.01). The mean duration of pain experienced was 1.5 seconds in the Wand group and 34 seconds in the syringe group (p < 0.01). The Wand was effective at significantly reducing the pain associated with local anesthetic infiltration in minor eyelid surgical procedures. Patients appear to feel pain from the initial needle stick but not during the actual injection.
Price, Randi; Wan, Ping
2010-01-01
A potentiometric titration for determining the quaternary ammonium compounds (QAC) commonly found in antimicrobial products was validated by a single laboratory. Traditionally, QACs were determined by using a biphasic (chloroform and water) manual titration procedure. Because of safety considerations regarding chloroform, as well as the subjectivity of color indicator-based manual titration determinations, an automatic potentiometric titration procedure was tested with quaternary nitrogen product formulations. By using the Metrohm Titrando system coupled with an ionic surfactant electrode and an Ag/AgCl reference electrode, titrations were performed with various QAC-containing formulation products/matrixes; a standard sodium lauryl sulfate solution was used as the titrant. Results for the products tested are sufficiently reproducible and accurate for the purpose of regulatory product enforcement. The robustness of the method was measured by varying pH levels, as well as by comparing buffered versus unbuffered titration systems. A quantitation range of 1-1000 ppm quaternary nitrogen was established. Eight commercially available antimicrobial products covering a variety of matrixes were assayed; the results obtained were comparable to those obtained by the manual titration method. Recoveries of 94 to 104% were obtained for spiked samples.
Conversion of school nurse policy and procedure manual to electronic format.
Randall, Joellyn; Knee, Rachel; Galemore, Cynthia
2006-10-01
Policy and procedure manuals are essential to establishing standards of practice and ensuring quality of care to students and families. The Olathe District Schools (Kansas) Technology Department created the Virtual File Cabinet to provide online access to employee policies, school board policies, forms, and other documents. A task force of school nurses was formed to convert the nursing department's policies, procedures, protocols, and forms from hard copy to electronic format and make them available on the district's Virtual File Cabinet. Having the policy and procedure manuals in electronic format allows for quick access and ease in updating information, thereby guaranteeing the school nurses have access to the most current information. Cost savings were realized by reducing the amount of paper and staff time needed to copy, collate, and assemble materials.
DOT National Transportation Integrated Search
2010-06-01
This manual provides information and recommended procedures to be utilized by an agencys Weigh-in-Motion (WIM) Office Data Analyst to perform validation and quality control (QC) checks of WIM traffic data. This manual focuses on data generated by ...
Saving Time with Automated Account Management
ERIC Educational Resources Information Center
School Business Affairs, 2013
2013-01-01
Thanks to intelligent solutions, schools, colleges, and universities no longer need to manage user account life cycles by using scripts or tedious manual procedures. The solutions house the scripts and manual procedures. Accounts can be automatically created, modified, or deleted in all applications within the school. This article describes how an…
Library Collections Development and Maintenance Policies and Procedures Manual.
ERIC Educational Resources Information Center
Tubesing, Richard
This manual for the College of the Southwest (New Mexico) library delineates collection development policies and procedures for library and teaching faculty. The first section deals with collection development and maintenance responsibilities: knowledge of the collection; knowledge of college and course needs; library materials budget allocations;…
Effluent Monitoring Procedures: Nutrients. Student Reference Manual.
ERIC Educational Resources Information Center
Environmental Protection Agency, Washington, DC. Office of Water Programs.
This is one of several short-term courses developed to assist in the training of waste water treatment plant operational personnel in the tests, measurements, and report preparation required for compliance with their NPDES Permits. The Student Reference Manual provides step-by-step procedures for laboratory application of equipment operating…
77 FR 41172 - Trademark Board Manual of Procedure, Third Edition, Revision 1
Federal Register 2010, 2011, 2012, 2013, 2014
2012-07-12
... DEPARTMENT OF COMMERCE Patent and Trademark Office [Docket No. PTO-T-2012-0028] Trademark Board Manual of Procedure, Third Edition, Revision 1 AGENCY: United States Patent and Trademark Office... not have the force and effect of law. Its guidelines have been developed as a matter of internal...
DOT National Transportation Integrated Search
1978-01-01
This manual has been written to provide the pavement manager and design engineer with a ready reference of procedures to predict the structural responses and hence the integrity of flexible pavements. A pavement section of known geometry is chosen, a...
Retrospective Conversion Manual: University Library Recon Project.
ERIC Educational Resources Information Center
Ramage, Pat
This manual provides a brief description of the procedures employed by the University of South Alabama in converting their library records from print to computerized cataloging. A description of the procedure is followed by detailed instructions and examples. Rules for NOTIS-LCCN Conversion Records, OCLC--Telex Transfer, and Conversion of…
Parent Child Center Program Management Information System. User's Manual.
ERIC Educational Resources Information Center
Warner, Donna D.; And Others
This manual describes procedures for collecting, recording, and reporting in a uniform, timely manner critical information necessary to the making of key management decisions for parent child centers as well as for the parent child center program. The first section describes recommended data collection and recordkeeping procedures for such…
40 CFR 63.1544 - Standards for fugitive dust sources.
Code of Federal Regulations, 2011 CFR
2011-07-01
... according to, a standard operating procedures manual that describes in detail the measures that will be put... (c) of this section, the standard operating procedures manual shall be submitted to the Administrator... 40 Protection of Environment 12 2011-07-01 2009-07-01 true Standards for fugitive dust sources. 63...
40 CFR 63.1544 - Standards for fugitive dust sources.
Code of Federal Regulations, 2010 CFR
2010-07-01
... according to, a standard operating procedures manual that describes in detail the measures that will be put... (c) of this section, the standard operating procedures manual shall be submitted to the Administrator... 40 Protection of Environment 12 2010-07-01 2010-07-01 true Standards for fugitive dust sources. 63...
78 FR 15876 - Activation of Ice Protection
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-13
... procedures in the Airplane Flight Manual for operating in icing conditions must be initiated. (2) Visual cues... procedures in the Airplane Flight Manual for operating in icing conditions must be initiated. (3) If the... operating rules for flight in icing conditions. This document corrects an error in the amendatory language...
Effluent Monitoring Procedures: Metals Analyses. Student Reference Manual.
ERIC Educational Resources Information Center
Environmental Protection Agency, Washington, DC. Office of Water Programs.
This is one of several short-term courses developed to assist in the training of waste water treatment plant operational personnel in the tests, measurements, and report preparation required for compliance with their NPDES Permits. The Student Reference Manual provides step-by-step procedures for laboratory application of equipment operating…
Maine Educational Assessment (MEA) Operational Procedures, March 2005 Administration.
ERIC Educational Resources Information Center
Maine Department of Education, 2004
2004-01-01
This document is intended for use in conjunction with "Policies and Procedures for Accommodations and Alternate Assessment to the MEA," and both the "MEA Principal/Test Coordinator's Manual" and the "MEA Test Administrator's Manual." The first section, Enrollment, covers the following subjects: (1) Participation of Enrolled Students; (2) Students…
The purpose of this manual is to document procedures that were developed and used by the Ecological Exposure Research Division, NERL, ORD, for the assessment of the physical and biological characteristics of headwater streams; and to provide a catalog of procedures to other group...
Citizen Action Manual: How to Effect Change in the Adoption/Foster Care System.
ERIC Educational Resources Information Center
Possin, Carol
This manual for child advocates in New York describes detailed procedures for organizing and operating citizen adoption groups and provides background information on the decision-making bodies, funding sources and resource organizations involved in adoptions. Procedures for changing bureaucracies and influencing legislation are emphasized.…
49 CFR 192.605 - Procedural manual for operations, maintenance, and emergencies.
Code of Federal Regulations, 2011 CFR
2011-10-01
... maintenance activities and for emergency response. For transmission lines, the manual must also include... and effective manner. (5) Starting up and shutting down any part of the pipeline in a manner designed... control room management procedures required by § 192.631. (c) Abnormal operation. For transmission lines...
Intranets: virtual procedure manuals for the pathology lab.
Ruby, S G; Krempel, G
1998-08-01
A novel system exists for replacing standard written operation manuals using a computerized PC-based peer-to-peer network. The system design is based on commonly available hardware and software and utilizes existing equipment to minimize implementation expense. The system is relatively easy to implement and maintain, involves minimal training, and should quickly become a financial asset. In addition, such a system can improve access to laboratory procedure manuals so that resources can be better used on a daily basis.
Strategies to overcome size and mechanical disadvantages in manual therapy
Hazle, Charles R.; Lee, Matthew
2016-01-01
The practice of manual therapy (MT) is often difficult when providing care for large patients and for practitioners small in stature or with other physical limitations. Many MT techniques can be modified using simple principles to require less exertion, permitting consistency with standards of practice even in the presence of physical challenges. Commonly used MT techniques are herein described and demonstrated with alternative preparatory and movement methods, which can also be adopted for use in other techniques. These alternative techniques and the procedures used to adapt them warrant discussion among practitioners and educators in order to implement care, consistent with the best treatment evidence for many common musculoskeletal (MSK) conditions. The inclusion in educational curricula and MT training programs is recommended to enrich skill development in physical therapists (PTs), spanning entry-level practitioners to those pursuing advanced manual skills. PMID:27559282
ERIC Educational Resources Information Center
Kansas State Dept. of Education, Topeka. Div. of Education Services.
The document is a brief collection of materials which provide a framework whereby local Kansas education units can individually and collectively identify ways to use the statewide effort to strengthen existing programs of service or develop new approaches at the local level for educating the mentally retarded. Part I introduces the process systems…
Flexible pavement rehabilitation manual. Rev., June 2001
DOT National Transportation Integrated Search
2001-06-01
This manual delineates the basic design strategies of the 1979 "Asphalt Concrete Overlay Design Manual" plus the many changes in procedures, and incorporates the use of new strategies and materials presently being used by Caltrans. Environmental conc...
14 CFR 21.5 - Airplane or Rotorcraft Flight Manual.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Airplane or Rotorcraft Flight Manual. 21.5... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS General § 21.5 Airplane or Rotorcraft Flight Manual. (a) With each airplane or rotorcraft that was not type certificated with an Airplane or Rotorcraft Flight Manual...
14 CFR 21.308 - Quality manual.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Quality manual. 21.308 Section 21.308... PROCEDURES FOR PRODUCTS AND PARTS Approval of Materials, Parts, Processes, and Appliances § 21.308 Quality manual. Each applicant for or holder of a PMA must provide a manual describing its quality system to the...
14 CFR 21.5 - Airplane or Rotorcraft Flight Manual.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Airplane or Rotorcraft Flight Manual. 21.5... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS General § 21.5 Airplane or Rotorcraft Flight Manual. (a) With each airplane or rotorcraft not type certificated with an Airplane or Rotorcraft Flight Manual and...
14 CFR 21.5 - Airplane or Rotorcraft Flight Manual.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Airplane or Rotorcraft Flight Manual. 21.5... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS General § 21.5 Airplane or Rotorcraft Flight Manual. (a) With each airplane or rotorcraft not type certificated with an Airplane or Rotorcraft Flight Manual and...
14 CFR 21.5 - Airplane or Rotorcraft Flight Manual.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Airplane or Rotorcraft Flight Manual. 21.5... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS General § 21.5 Airplane or Rotorcraft Flight Manual. (a) With each airplane or rotorcraft not type certificated with an Airplane or Rotorcraft Flight Manual and...
ERIC Educational Resources Information Center
Sullivan, Francis J.
1997-01-01
Examines how conflicts between management and workers over division of labor are enacted in two manuals--the official manual operationalizing Internal Revenue Service (IRS) regulations and a "translation" of the official manual--governing tax examiners' work in an IRS Service Center. Finds that systemic differences between the manuals…
ERIC Educational Resources Information Center
Saint Louis Regional Library Network, MO.
Included in this set of manuals are: (1) guidelines for document delivery to member libraries within the St. Louis Regional Library Network (SLRLN) in which eligible materials are described, addressing and packing are outlined, routing and deliveries are discussed, and a list of delivery system participants is provided; (2) a descriptive guide to…
Petrographic methods of examining hardened concrete : a petrographic manual.
DOT National Transportation Integrated Search
1997-11-01
This manual was undertaken to record for all persons wishing to do concrete : petrography the petrographic procedures that have been found useful at the : Virginia Transportation Research Council. The manual is made up of an : introduction and chapte...
Conversion of School Nurse Policy and Procedure Manual to Electronic Format
ERIC Educational Resources Information Center
Randall, Joellyn; Knee, Rachel; Galemore, Cynthia
2006-01-01
Policy and procedure manuals are essential to establishing standards of practice and ensuring quality of care to students and families. The Olathe District Schools (Kansas) Technology Department created the Virtual File Cabinet to provide online access to employee policies, school board policies, forms, and other documents. A task force of school…
Interlibrary Loan, the Key to Resource Sharing: A Manual of Procedures and Protocols.
ERIC Educational Resources Information Center
Alaska State Dept. of Education, Juneau. Div. of State Libraries.
Intended for use by librarians in Alaska, this manual provides general guidelines for the maximum utilization of library resources through interlibrary loan service. The first of four major sections describes the Alaska Library Network (ALN), which provides protocols and procedures to libraries for resource sharing; points out that new protocols…
ERIC Educational Resources Information Center
Weisburd, Melvin I.
The Field Operations and Enforcement Manual for Air Pollution Control, Volume III, explains in detail the following: inspection procedures for specific sources, kraft pulp mills, animal rendering, steel mill furnaces, coking operations, petroleum refineries, chemical plants, non-ferrous smelting and refining, foundries, cement plants, aluminum…
Starch gel electrophoresis of conifer seeds: a laboratory manual
M. Thompson Conkle; Paul D. Hodgskiss; Lucy B. Nunnally; Serena C. Hunter
1982-01-01
This manual describes fast, low-cost biochemical procedures for separating enzymes representing numerous genes of forest trees. During electrophoresis the mixture of enzymes from a megagametophyte or embryo of a germinated seed separates in a gel. Specific stains applied to gel slices locate each enzyme. These procedures expand on those developed for crops research....
Self-Monitoring Procedures: Basic Parameters for Municipal Effluents. Student Reference Manual.
ERIC Educational Resources Information Center
Environmental Protection Agency, Washington, DC. Office of Water Programs.
This is one of several short-term courses developed to assist in the training of waste water treatment plant operational personnel in the tests, measurements, and report preparation required for compliance with their NPDES Permits. The Student Reference Manual provides step-by-step procedures for laboratory application of equipment operating…
ERIC Educational Resources Information Center
Dudenhoeffer, Frances Tomlin; Fedak, Joseph F.
This student staff personnel manual is designed to orient student employees of the New Mexico State University (Las Cruces) Office of Intramural/Recreational Sports to their duties and responsibilities and to provide personnel policies and standard operating procedures. Topics include: student employment procedures, pay rates for job…
Special Education Services: A Manual of Policies, Procedures and Guidelines
ERIC Educational Resources Information Center
British Columbia Ministry of Education, 2013
2013-01-01
This resource conveys policies, procedures, and guidelines that support the delivery of special education services in British Columbia's (Canada) public schools. It was originally published in 1995 (ED414703), following an extensive provincial Special Education Review (1993-94). The purpose of this manual is to provide a single point of reference…
No-migration variance petition. Appendices C--J: Volume 5, Revision 1
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1990-03-01
Volume V contains the appendices for: closure and post-closure plans; RCRA ground water monitoring waver; Waste Isolation Division Quality Program Manual; water quality sampling plan; WIPP Environmental Procedures Manual; sample handling and laboratory procedures; data analysis; and Annual Site Environmental Monitoring Report for the Waste Isolation Pilot Plant.
Regulations and Procedures Manual
DOE Office of Scientific and Technical Information (OSTI.GOV)
Young, Lydia J.
The purpose of the Regulations and Procedures Manual (RPM) is to provide LBNL personnel with a reference to University and Lawrence Berkeley National Laboratory (LBNL or Laboratory) policies and regulations by outlining normal practices and answering most policy questions that arise in the day-to-day operations of Laboratory organizations. Much of the information in this manual has been condensed from detail provided in LBNL procedure manuals, Department of Energy (DOE) directives, and Contract DE-AC02-05CH11231. This manual is not intended, however, to replace any of those documents. RPM sections on personnel apply only to employees who are not represented by unions. Personnelmore » policies pertaining to employees represented by unions may be found in their labor agreements. Questions concerning policy interpretation should be directed to the LBNL organization responsible for the particular policy. A link to the Managers Responsible for RPM Sections is available on the RPM home page. If it is not clear which organization is responsible for a policy, please contact Requirements Manager Lydia Young or the RPM Editor.« less
Levels at streamflow gaging stations
Kennedy, E.J.
1988-01-01
This manual establishes the surveying procedures for setting gages at a streamflow gaging station to datum and for checking them periodically for errors caused by vertical movement of the gage-supporting structures. The surveying terms and concepts used are explained; and the details of testing, adjusting, and operating the instruments are outlined. Notekeeping, adjusting level circuits, checking gages, summarizing results, locating the nearest National Geodetic Vertical Datum of 1929 bench mark, and relating the gage datum to the national datum are described.
46 CFR 160.176-19 - Servicing.
Code of Federal Regulations, 2010 CFR
2010-10-01
... section contains requirements for servicing facilities, manuals, training, guidelines, and records. Other... follow the procedures in the service manual required by this section. (2) Each servicing facility must... strong sunlight, and have appropriate temperature and humidity control as specified in the service manual...
12. Photocopy of drawing of underground missile storage, elevator and ...
12. Photocopy of drawing of underground missile storage, elevator and ground-level launchers from 'Procedures and Drills for the NIKE Ajax System,' Department of the Army Field Manual, FM-44-80 from Institute for Military History, Carlisle Barracks, Carlisle, PA, 1956 - NIKE Missile Battery PR-79, East Windsor Road south of State Route 101, Foster, Providence County, RI
Emergencies and Problems: A Procedures Manual for Trinity University Library.
ERIC Educational Resources Information Center
Pettit, Katherine D.
The first of six sections in this manual outlines a series of steps to be followed when an emergency or problem occurs. These procedures are divided into four categories: (1) behavioral emergencies, i.e., bomb threats, building takeover, problem patrons, or thefts; (2) building emergencies, i.e., elevator failure, fire, flooding of building/water…
ERIC Educational Resources Information Center
Ohio State Dept. of Education, Columbus. Trade and Industrial Education Service.
Developed by the State Division of Vocational Education with the help of qualified consultants, this instructor's manual is for use in teaching the fundamental law enforcement procedures. Suggested time allotment, teaching guides, and presentation methods are included for each of the training procedures. Line drawings and photographs supplement…
ERIC Educational Resources Information Center
Nassau Community Coll., Garden City, NY.
This document is the first in a series of annual, faculty-designed supplements to Nassau Community College's (NCC's) (New York) manual, "Concepts & Procedures for Academic Assessment." The supplements are intended to provide faculty a forum through which they can communicate assessment designs and the impacts of those designs on…
The procedures manual of the Environmental Measurements Laboratory. Volume 1, 28. edition
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chieco, N.A.
1997-02-01
This manual covers procedures and technology currently in use at the Environmental Measurements Laboratory. An attempt is made to be sure that all work carried out will be of the highest quality. Attention is focused on the following areas: quality assurance; sampling; radiation measurements; analytical chemistry; radionuclide data; special facilities; and specifications.
Operator's manual on the visual-accumulation tube method for sedimentation analysis of sands
Colby, V.C.; Witzgman, F.W.
1958-01-01
The personnel who will be operating these units may have little or no previous knowledge of either the principles involved or the details of opera.ting procedure. This manual is intended as an aid to them in setting up the apparatus, learning the analytical procedure, interpreting the results, and understanding the primary principles encountered.
Manual of Procedures for Evaluation Visits under Standards for Accreditation, 1972. Revised 1977.
ERIC Educational Resources Information Center
American Library Association, Chicago, IL. Committee on Accreditation.
This fully revised manual of procedures for evaluation visits presents guidelines for site visits to library schools seeking accreditation for their programs of study. Visits to such schools provide the Committee on Accreditation with data to assist in reaching a judgment whether to grant accredited status. The area of responsibility for the…
ERIC Educational Resources Information Center
South Carolina Commission on Higher Education, Columbia.
This manual outlines the policies and procedures related to the submission and review of facilities projects at South Carolina's public colleges and universities. It provides an overview of the South Carolina Commission on Higher Education's role and responsibilities and its general policy regarding permanent improvements to facilities. The report…
24 CFR 3282.207 - Manufactured home consumer manual requirements.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 24 Housing and Urban Development 5 2014-04-01 2014-04-01 false Manufactured home consumer manual... HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME PROCEDURAL AND ENFORCEMENT REGULATIONS Manufacturer Inspection and Certification Requirements § 3282.207 Manufactured home consumer manual requirements. (a) The...
24 CFR 3282.207 - Manufactured home consumer manual requirements.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 24 Housing and Urban Development 5 2012-04-01 2012-04-01 false Manufactured home consumer manual... HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME PROCEDURAL AND ENFORCEMENT REGULATIONS Manufacturer Inspection and Certification Requirements § 3282.207 Manufactured home consumer manual requirements. (a) The...
24 CFR 3282.207 - Manufactured home consumer manual requirements.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 24 Housing and Urban Development 5 2013-04-01 2013-04-01 false Manufactured home consumer manual... HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME PROCEDURAL AND ENFORCEMENT REGULATIONS Manufacturer Inspection and Certification Requirements § 3282.207 Manufactured home consumer manual requirements. (a) The...
24 CFR 3282.207 - Manufactured home consumer manual requirements.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 24 Housing and Urban Development 5 2011-04-01 2011-04-01 false Manufactured home consumer manual... HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME PROCEDURAL AND ENFORCEMENT REGULATIONS Manufacturer Inspection and Certification Requirements § 3282.207 Manufactured home consumer manual requirements. (a) The...
DOT National Transportation Integrated Search
1988-03-01
Users of the manual are expected to be in divisions responsible for pedestrian safety in cities, counties, and other jurisdictions. The users manual outlines a step-by-step procedure to measure pedestrian volumes using small count intervals. Appendix...
Malcolme-Lawes, Louisa C; Lim, Phang Boon; Koa-Wing, Michael; Whinnett, Zachary I; Jamil-Copley, Shahnaz; Hayat, Sajad; Francis, Darrel P; Kojodjojo, Pipin; Davies, D Wyn; Peters, Nicholas S; Kanagaratnam, Prapa
2013-01-01
Recurrent arrhythmias after ablation procedures are often caused by recovery of ablated tissue. Robotic catheter manipulation systems increase catheter tip stability which improves energy delivery and could produce more transmural lesions. We tested this assertion using bipolar voltage attenuation as a marker of lesion quality comparing robotic and manual circumferential pulmonary vein ablation for atrial fibrillation (AF). Twenty patients were randomly assigned to robotic or manual AF ablation at standard radiofrequency (RF) settings for our institution (30 W 60 s manual, 25 W 30 s robotic, R30). A separate group of 10 consecutive patients underwent robotic ablation at increased RF duration, 25 W for 60 s (R60). Lesions were marked on an electroanatomic map before and after ablation to measure distance moved and change in bipolar electrogram amplitude during RF. A total of 1108 lesions were studied (761 robotic, 347 manual). A correlation was identified between voltage attenuation and catheter movement during RF (Spearman's rho -0.929, P < 0.001). The ablation catheter was more stable during robotic RF; 2.9 ± 2.3 mm (R30) and 2.6 ± 2.2 mm (R60), both significantly less than the manual group (4.3 ± 3.0 mm, P < 0.001). Despite improved stability, there was no difference in signal attenuation between the manual and R30 group. However, there was increased signal attenuation in the R60 group (52.4 ± 19.4%) compared with manual (47.7 ± 25.4%, P = 0.01). When procedures under general anaesthesia (GA) and conscious sedation were analysed separately, the improvement in signal attenuation in the R60 group was only significant in the procedures under GA. Robotically assisted ablation has the capability to deliver greater bipolar voltage attenuation compared with manual ablation with appropriate selection of RF parameters. General anaesthesia confers additional benefits of catheter stability and greater signal attenuation. These findings may have a significant impact on outcomes from AF ablation procedures.
Using rewards and penalties to obtain desired subject performance
NASA Technical Reports Server (NTRS)
Cook, M.; Jex, H. R.; Stein, A. C.; Allen, R. W.
1981-01-01
Operant conditioning procedures, specifically the use of negative reinforcement, in achieving stable learning behavior is described. The critical tracking test (CTT) a method of detecting human operator impairment was tested. A pass level is set for each subject, based on that subject's asymptotic skill level while sober. It is critical that complete training take place before the individualized pass level is set in order that the impairment can be detected. The results provide a more general basis for the application of reward/penalty structures in manual control research.
Livestock Nutrition and Feeding. Student Manual. Second Edition.
ERIC Educational Resources Information Center
Ridenour, Harlan E.
This manual is designed to help agricultural education students and teachers to apply scientific facts and principles to problem-solving procedures in determining nutritious and economical livestock feeding programs. The manual provides applied scientific activities in biological science and chemistry, mathematics, and communication skills. It…
Miami University Information Manual.
ERIC Educational Resources Information Center
Miami Univ., Oxford, OH.
The 1975 information manual is designed to provide current data on policies, procedures, services, facilities, organization and governance of Miami University and, through the extensive index, quick access to this information. The manual is complementary to the university catalog and directory. Information relating to students is in the Student…
SRC-I demonstration plant analytical laboratory methods manual. Final technical report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Klusaritz, M.L.; Tewari, K.C.; Tiedge, W.F.
1983-03-01
This manual is a compilation of analytical procedures required for operation of a Solvent-Refined Coal (SRC-I) demonstration or commercial plant. Each method reproduced in full includes a detailed procedure, a list of equipment and reagents, safety precautions, and, where possible, a precision statement. Procedures for the laboratory's environmental and industrial hygiene modules are not included. Required American Society for Testing and Materials (ASTM) methods are cited, and ICRC's suggested modifications to these methods for handling coal-derived products are provided.
McCartney, Elspeth; Boyle, James; Bannatyne, Susan; Jessiman, Emma; Campbell, Cathy; Kelsey, Cherry; Smith, Jennifer; O'Hare, Anne
2004-01-01
The construction of therapy protocols for a large-scale randomized controlled trial comparing speech and language therapists and assistants, and group and individual therapy approaches for children aged 6-11 in mainstream schools is outlined. The aim was to outline the decision-making processes that led to the construction of the research therapy manual, and to give a preliminary report on compliance with the manual. A search of the research and professional literature and of published therapy materials was conducted to locate usable examples of effective language therapy for primary school children. Results were collated into a manual of therapy principles and activities to structure research intervention. The use of the manual with children (n=30) receiving individual or group direct therapy from a speech and language therapist in the first phase of intervention was audited. Very few high-level research studies were found, but the professional literature gave added information. Therapies for comprehension monitoring, vocabulary development, later grammar and narrative were adapted for the research intervention, and procedures compiled into a manual to guide research speech and language therapists and assistants. The audit of direct therapy suggested that the manual was useable, providing a suitable range of activities and materials for therapy intervention. Its use helped to record the therapy offered to research children, and formed a sound basis for discussion amongst speech and language therapists and between speech and language therapist/assistant pairs. The construction and use of a therapy manual allowed the provision of replicable therapy within the research project whilst maintaining flexibility.
NASA Astrophysics Data System (ADS)
Pham, Dzung L.; Han, Xiao; Rettmann, Maryam E.; Xu, Chenyang; Tosun, Duygu; Resnick, Susan; Prince, Jerry L.
2002-05-01
In previous work, the authors presented a multi-stage procedure for the semi-automatic reconstruction of the cerebral cortex from magnetic resonance images. This method suffered from several disadvantages. First, the tissue classification algorithm used can be sensitive to noise within the image. Second, manual interaction was required for masking out undesired regions of the brain image, such as the ventricles and putamen. Third, iterated median filters were used to perform a topology correction on the initial cortical surface, resulting in an overly smoothed initial surface. Finally, the deformable surface used to converge to the cortex had difficulty capturing narrow gyri. In this work, all four disadvantages of the procedure have been addressed. A more robust tissue classification algorithm is employed and the manual masking step is replaced by an automatic method involving level set deformable models. Instead of iterated median filters, an algorithm developed specifically for topology correction is used. The last disadvantage is addressed using an algorithm that artificially separates adjacent sulcal banks. The new procedure is more automated but also more accurate than the previous one. Its utility is demonstrated by performing a preliminary study on data from the Baltimore Longitudinal Study of Aging.
Manual hierarchical clustering of regional geochemical data using a Bayesian finite mixture model
Ellefsen, Karl J.; Smith, David
2016-01-01
Interpretation of regional scale, multivariate geochemical data is aided by a statistical technique called “clustering.” We investigate a particular clustering procedure by applying it to geochemical data collected in the State of Colorado, United States of America. The clustering procedure partitions the field samples for the entire survey area into two clusters. The field samples in each cluster are partitioned again to create two subclusters, and so on. This manual procedure generates a hierarchy of clusters, and the different levels of the hierarchy show geochemical and geological processes occurring at different spatial scales. Although there are many different clustering methods, we use Bayesian finite mixture modeling with two probability distributions, which yields two clusters. The model parameters are estimated with Hamiltonian Monte Carlo sampling of the posterior probability density function, which usually has multiple modes. Each mode has its own set of model parameters; each set is checked to ensure that it is consistent both with the data and with independent geologic knowledge. The set of model parameters that is most consistent with the independent geologic knowledge is selected for detailed interpretation and partitioning of the field samples.
Chapter A7. Biological Indicators
Myers, Donna N.; Wilde, Franceska D.
2003-01-01
The National Field Manual for the Collection of Water-Quality Data (National Field Manual) provides guidelines and standard procedures for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation's surface-water and ground-water resources. This chapter of the manual includes procedures for the (1) determination of biochemical oxygen demand using a 5-day bioassay test; (2) collection, identification, and enumeration of fecal indicator bacteria; (3) collection of samples and information on two laboratory methods for fecal indicator viruses (coliphages); and (4) collection of samples for protozoan pathogens. Each chapter of the National Field Manual is published separately and revised periodically. Newly published and revised chapters are posted on the World Wide Web on the USGS page 'National Field Manual for the Collection of Water-Quality Data.' The URL for this page is http://pubs.water.usgs.gov/twri9A/ (accessed November 25, 2003).
ERIC Educational Resources Information Center
Meyer, Linda A.; And Others
This manual describes the model--specifically the observation procedures and coding systems--used in a longitudinal study of how children learn to comprehend what they read, with particular emphasis on science texts. Included are procedures for the following: identifying students; observing--recording observations and diagraming the room; writing…
Materials inventory management manual
NASA Technical Reports Server (NTRS)
1992-01-01
This NASA Materials Inventory Management Manual (NHB 4100.1) is issued pursuant to Section 203(c)(1) of the National Aeronautics and Space Act of 1958 (42 USC 2473). It sets forth policy, performance standards, and procedures governing the acquisition, management and use of materials. This Manual is effective upon receipt.
14 CFR 91.1023 - Program operating manual requirements.
Code of Federal Regulations, 2010 CFR
2010-01-01
... manager must prepare and keep current a program operating manual setting forth procedures and policies acceptable to the Administrator. The program manager's management, flight, ground, and maintenance personnel... personnel. (b) Each program manager must maintain at least one copy of the manual at its principal base of...
Battery Test Manual For 12 Volt Start/Stop Hybrid Electric Vehicles
DOE Office of Scientific and Technical Information (OSTI.GOV)
Belt, Jeffrey R.
This manual was prepared by and for the United Stated Advanced Battery Consortium (USABC) Electrochemical Energy Storage Team. It is based on the targets established for 12 Volt Start/Stop energy storage development and is similar (with some important changes) to an earlier manual for the former FreedomCAR program. The specific procedures were developed primarily to characterize the performance of energy storage devices relative to the USABC requirements. However, it is anticipated that these procedures will have some utility for characterizing 12 Volt Start/Stop hybrid energy storage device behavior in general.
ERIC Educational Resources Information Center
Puerto Rico State Dept. of Education, Hato Rey. Area for Vocational and Technical Education.
This laboratory manual on microbiology begins with an introduction relating the study of microorganisms to health occupations education and stressing the importance of teaching critical thinking. The introduction is followed by general instructions for the use of the manual and an illustration of hand washing procedures. The 13 laboratory…
Spiliopoulos, S; Katsanos, K; Diamantopoulos, A; Karnabatidis, D; Siablis, D
2011-05-01
To present the results of a prospective, randomized, single-centre study investigating local anaesthesia before percutaneous common femoral artery (CFA) puncture and catheterization with the use of ultrasound-guided injection of lidocaine versus standard infiltration by manual palpation. Patients scheduled to undergo diagnostic or therapeutic transfemoral catheter-based procedures gave informed consent and were randomized in two groups. In the first arm local anaesthesia with lidocaine hydrochloride 1% was performed under ultrasound guidance (group U/S), while in the second arm the standard method of manual artery palpation was applied (group M). In both groups, subsequent CFA catheterization was achieved under ultrasound guidance. The primary study endpoint was peri-procedural pain level evaluated with a visual-analogue scale (VAS score 0-10). Between January 2009 and 2010, 200 patients (161 men, mean age 63±12 years) were equally assigned to each group without any significant differences in baseline demographics. Patients in group U/S experienced significantly less pain during CFA catheterization in comparison with group M with a difference of three points in mean VAS score reported (1.6±1.6 versus 4.6±1.9, p<0.0001). In addition, significantly less volume of lidocaine was used in group U/S compared to group M (16±2.7 versus 19±0.8ml, p<0.001).Total vascular access time was similar in both groups (4.4±1.3 versus 4.5±1.3min). Overall complications included two small groin haematomas in each group. Ultrasound-guided local anaesthesia of the CFA prior to percutaneous transcatheter procedures is safe and achieves superior levels of analgesia with minimal patient pain and discomfort compared to the standard method of manual palpation. Copyright © 2011 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.
Operation and maintenance manual for a preprototype Sabatier carbon dioxide reduction subsystem
NASA Technical Reports Server (NTRS)
Kleiner, G. N.
1981-01-01
The manual delineates the procedures, precautions and necessary sequences of steps required to prepare the package for test, provide troubleshooting information and perform required maintenance by the operating crew. The manual is divided into five sections: Installation, Checkout, Operation, Failure Detection/Isolation and Maintenance.
Hunter Education: Instructor Manual. Shooting Skills Series.
ERIC Educational Resources Information Center
Diebold, Louis, Comp.; And Others
Composed of three books (a procedures guide, the basic student manual, and lesson plans), the instructor's manual provides information to set up and conduct a Hunter Education Certification Course. Course topics include: an introduction, firearms and ammunition, hunting tradition and ethics, the hunter and conservation, safe firearms handling,…
ERIC Educational Resources Information Center
New York Library Association, New York.
This manual advises library administrators in the state of New York on the responsibilities of individual institutions regarding censorship, patron confidentiality, and other intellectual freedom issues. Besides listing organizations available for consultation, the manual recommends procedures and policies for dealing with law enforcement…
Dental Aide. Student Manual [and] Instructor Key. Revised.
ERIC Educational Resources Information Center
Heckman, Karen; Noirfalise, Pat
The first component of this three-part package is a student manual designed to be used independently in secondary health occupations programs or on-the-job training programs for dental assistants. The manual contains seven units that cover the following topics: introduction to dentistry; basic office procedures; infection control and occupational…
Quartermaster 1 and C, Rate Training Manual.
ERIC Educational Resources Information Center
Naval Personnel Program Support Activity, Washington, DC.
The technical subject matter of the Quartermaster rating is presented in this training manual written to prepare men of the Navy and Naval Reserve for advancement examinations. The manual includes eleven chapters. Discussed are commonly used methods and procedures of operating magnetic compasses and gyrocompasses, determining a ship's position,…
Mathematics: Essential to Marketing. Student's Manual and Teacher's Guide.
ERIC Educational Resources Information Center
Helton, Betty G.; Griffin, Jennie
This document contains both a student's manual and a teacher's guide for high school mathematics essential to marketing. The student's manual contains 34 assignments within the following 11 units: (1) arithmetic fundamentals; (2) application of arithmetic fundamentals; (3) cashiering; (4) inventory procedures; (5) invoices; (6) computing employee…
49 CFR 195.402 - Procedural manual for operations, maintenance, and emergencies.
Code of Federal Regulations, 2011 CFR
2011-10-01
... necessary to insure that the manual is effective. This manual shall be prepared before initial operations of... reporting accidents under subpart B of this part in a timely and effective manner. (3) Operating... fire, police, and other appropriate public officials to learn the responsibility and resources of each...
14 CFR 21.441 - Procedure manual.
Code of Federal Regulations, 2010 CFR
2010-01-01
... manual. (a) No DAS may exercise any authority under this subpart unless it submits, and obtains approval... limitations or Aircraft Flight Manuals, and sign supplemental type certificates. (b) No DAS may continue to perform any DAS function affected by any change in facilities or staff necessary to continue to meet the...
California School Accounting Manual. 1980 Edition.
ERIC Educational Resources Information Center
California State Dept. of Education, Sacramento.
The first California school accounting manual for use by the school districts and officers of the county superintendents of schools was published in 1939. Since then many revisions have taken place. The accounting procedures outlined in this publication have been approved as the official manual for California public school accounting. The…
Washington Manual: A New Tool for Local School Accounting
ERIC Educational Resources Information Center
Federal Aid Planner, 1972
1972-01-01
An advance glimpse of the revised financial accounting methods for school districts recommended in a new manual from the U. S. Office of Education. The manual is designed to help school districts modernize their financial accounting procedures and their entire range of fiscal management practices. (Author/DN)
Toms River Drivers Manual 1984-1985.
ERIC Educational Resources Information Center
Thomas, Patricia
The procedures in this manual are designed to establish stability and continuity within the student transportation department of the Toms River Regional Schools in New Jersey. The manual is divided into three sections. Section 1 provides driver and aide specific information. It includes directives related to time clock, spare buses, and…
Semi-automatic assessment of skin capillary density: proof of principle and validation.
Gronenschild, E H B M; Muris, D M J; Schram, M T; Karaca, U; Stehouwer, C D A; Houben, A J H M
2013-11-01
Skin capillary density and recruitment have been proven to be relevant measures of microvascular function. Unfortunately, the assessment of skin capillary density from movie files is very time-consuming, since this is done manually. This impedes the use of this technique in large-scale studies. We aimed to develop a (semi-) automated assessment of skin capillary density. CapiAna (Capillary Analysis) is a newly developed semi-automatic image analysis application. The technique involves four steps: 1) movement correction, 2) selection of the frame range and positioning of the region of interest (ROI), 3) automatic detection of capillaries, and 4) manual correction of detected capillaries. To gain insight into the performance of the technique, skin capillary density was measured in twenty participants (ten women; mean age 56.2 [42-72] years). To investigate the agreement between CapiAna and the classic manual counting procedure, we used weighted Deming regression and Bland-Altman analyses. In addition, intra- and inter-observer coefficients of variation (CVs), and differences in analysis time were assessed. We found a good agreement between CapiAna and the classic manual method, with a Pearson's correlation coefficient (r) of 0.95 (P<0.001) and a Deming regression coefficient of 1.01 (95%CI: 0.91; 1.10). In addition, we found no significant differences between the two methods, with an intercept of the Deming regression of 1.75 (-6.04; 9.54), while the Bland-Altman analysis showed a mean difference (bias) of 2.0 (-13.5; 18.4) capillaries/mm(2). The intra- and inter-observer CVs of CapiAna were 2.5% and 5.6% respectively, while for the classic manual counting procedure these were 3.2% and 7.2%, respectively. Finally, the analysis time for CapiAna ranged between 25 and 35min versus 80 and 95min for the manual counting procedure. We have developed a semi-automatic image analysis application (CapiAna) for the assessment of skin capillary density, which agrees well with the classic manual counting procedure, is time-saving, and has a better reproducibility as compared to the classic manual counting procedure. As a result, the use of skin capillaroscopy is feasible in large-scale studies, which importantly extends the possibilities to perform microcirculation research in humans. © 2013.
Krämer, Irene; Federici, Matteo; Kaiser, Vanessa; Thiesen, Judith
2016-04-01
The purpose of this study was to evaluate the contamination rate of media-fill products either prepared automated with a robotic system (APOTECAchemo™) or prepared manually at cytotoxic workbenches in the same cleanroom environment and by experienced operators. Media fills were completed by microbiological environmental control in the critical zones and used to validate the cleaning and disinfection procedures of the robotic system. The aseptic preparation of patient individual ready-to-use injection solutions was simulated by using double concentrated tryptic soy broth as growth medium, water for injection and plastic syringes as primary packaging materials. Media fills were either prepared automated (500 units) in the robot or manually (500 units) in cytotoxic workbenches in the same cleanroom over a period of 18 working days. The test solutions were incubated at room temperature (22℃) over 4 weeks. Products were visually inspected for turbidity after a 2-week and 4-week period. Following incubation, growth promotion tests were performed with Staphylococcus epidermidis. During the media-fill procedures, passive air monitoring was performed with settle plates and surface monitoring with contact plates on predefined locations as well as fingerprints. The plates got incubated for 5-7 days at room temperature, followed by 2-3 days at 30-35℃ and the colony forming units (cfu) counted after both periods. The robot was cleaned and disinfected according to the established standard operating procedure on two working days prior to the media-fill session, while on six other working days only six critical components were sanitized at the end of the media-fill sessions. Every day UV irradiation was operated for 4 h after finishing work. None of the 1000 media-fill products prepared in the two different settings showed turbidity after the incubation period thereby indicating no contamination with microorganisms. All products remained uniform, clear, and light-amber solutions. In addition, the reliability of the nutrient medium and the process was demonstrated by positive growth promotion tests with S. epidermidis. During automated preparation the recommended limits < 1 cfu per settle/contact plate set for cleanroom Grade A zones were not succeeded in the carousel and working area, but in the loading area of the robot. During manual preparation, the number of cfus detected on settle/contact plates inside the workbenches lay far below the limits. The number of cfus detected on fingertips succeeded several times the limit during manual preparation but not during automated preparation. There was no difference in the microbial contamination rate depending on the extent of cleaning and disinfection of the robot. Extensive media-fill tests simulating manual and automated preparation of ready-to-use cytotoxic injection solutions revealed the same level of sterility for both procedures. The results of supplemental environmental controls confirmed that the aseptic procedures are well controlled. As there was no difference in the microbial contamination rates of the media preparations depending on the extent of cleaning and disinfection of the robot, the results were used to adapt the respective standard operating procedures. © The Author(s) 2014.
Critical flow rate of anode fuel exhaust in a PEM fuel cell system
NASA Astrophysics Data System (ADS)
Zhu, Wenhua H.; Payne, Robert U.; Tatarchuk, Bruce J.
A manual purge line was added into the exterior fuel exhaust stream of a Ballard PEM stack in a Nexa™ power module. With the addition of manual exhaust purge, high levels of inert gases were intentionally added to the anode feed without changing normal operational procedures. A new method of determining the critical minimum flow rate in the anode exhaust stream was given by an anode mass balance. This type of operation makes dual use of membranes in the MEAs as both gas purifiers and as solid electrolytes. The PEM stack was successfully operated with up to ca. 7% nitrogen or carbon dioxide in the absence of a palladium-based hydrogen separator at ca. 200 W power level. Nitrogen in the anode stream was concentrated from 7.5% to 91.6%. The system maintained a fuel efficiency of 99% at a manual purge rate of 2.22 ml s -1 and no auto purge. The fuel cell stack efficiency was 64% and the stack output efficiency was 75%. The overall system efficiency was 39%. After troublesome CO and H 2S poisons were removed, a hydrocarbon reformate containing high levels of CO 2 and H 2O was further used in the Nexa™ stack. The size and complexity of the fuel processing system may be reduced at a specified power level by using this operational method.
Increasingly automated procedure acquisition in dynamic systems
NASA Technical Reports Server (NTRS)
Mathe, Nathalie; Kedar, Smadar
1992-01-01
Procedures are widely used by operators for controlling complex dynamic systems. Currently, most development of such procedures is done manually, consuming a large amount of paper, time, and manpower in the process. While automated knowledge acquisition is an active field of research, not much attention has been paid to the problem of computer-assisted acquisition and refinement of complex procedures for dynamic systems. The Procedure Acquisition for Reactive Control Assistant (PARC), which is designed to assist users in more systematically and automatically encoding and refining complex procedures. PARC is able to elicit knowledge interactively from the user during operation of the dynamic system. We categorize procedure refinement into two stages: diagnosis - diagnose the failure and choose a repair - and repair - plan and perform the repair. The basic approach taken in PARC is to assist the user in all steps of this process by providing increased levels of assistance with layered tools. We illustrate the operation of PARC in refining procedures for the control of a robot arm.
ERIC Educational Resources Information Center
Old West Regional Commission, Billings, MT.
To evaluate and test the effectiveness of the "Procedures Manual for Assisting the Socioeconomic Impact of the Construction and Operation of Coal Utilization Facilities in the Old West Region," an impact study of a proposed electric generating station on the Laramie River near Wheatland, Wyoming, identifies difficulties encountered in…
ERIC Educational Resources Information Center
Conable, Sharon R.
This manual has been compiled to provide consistent grant application and administrative procedures for state agencies which award grants or contracts to local governments. It provides a conceptual framework of information concerning the reporting, financial, contractual, and auditing requirements for recipients of Texas State Library grants…
Aircraft operations management manual
NASA Technical Reports Server (NTRS)
1992-01-01
The NASA aircraft operations program is a multifaceted, highly diverse entity that directly supports the agency mission in aeronautical research and development, space science and applications, space flight, astronaut readiness training, and related activities through research and development, program support, and mission management aircraft operations flights. Users of the program are interagency, inter-government, international, and the business community. This manual provides guidelines to establish policy for the management of NASA aircraft resources, aircraft operations, and related matters. This policy is an integral part of and must be followed when establishing field installation policy and procedures covering the management of NASA aircraft operations. Each operating location will develop appropriate local procedures that conform with the requirements of this handbook. This manual should be used in conjunction with other governing instructions, handbooks, and manuals.
Chapter A6. Field Measurements
Wilde, Franceska D.; Radtke, Dean B.
1998-01-01
The National Field Manual for the Collection of Water-Quality Data (National Field Manual) provides guidelines and standard procedures for U.S. Geological Survey (USGS) personnel who collect data used to assess the quality of the Nation's surface-water and ground-water resources. Chapter A6 presents procedures and guidelines for the collection of data on air and water temperature, and on dissolved-oxygen concentrations, specific electrical conductance, pH, reduction-oxidation potential, alkalinity, and turbidity in water. Each chapter of the National Field Manual is published separately and revised periodically. Newly published and revised chapters are posted on the World Wide Web on the USGS page 'National Field Manual for the Collection of Water-Quality Data.' The URL for this page is http://pubs.water.usgs.gov/twri9A (accessed August 6, 2005).
Cooperstein, Robert; Young, Morgan
2014-01-01
Upright examination procedures like radiology, thermography, manual muscle testing, and spinal motion palpation may lead to spinal interventions with the patient prone. The reliability and accuracy of mapping upright examination findings to the prone position is unknown. This study had 2 primary goals: (1) investigate how erroneous spine-scapular landmark associations may lead to errors in treating and charting spine levels; and (2) study the interexaminer reliability of a novel method for mapping upright spinal sites to the prone position. Experiment 1 was a thought experiment exploring the consequences of depending on the erroneous landmark association of the inferior scapular tip with the T7 spinous process upright and T6 spinous process prone (relatively recent studies suggest these levels are T8 and T9, respectively). This allowed deduction of targeting and charting errors. In experiment 2, 10 examiners (2 experienced, 8 novice) used an index finger to maintain contact with a mid-thoracic spinous process as each of 2 participants slowly moved from the upright to the prone position. Interexaminer reliability was assessed by computing Intraclass Correlation Coefficient, standard error of the mean, root mean squared error, and the absolute value of the mean difference for each examiner from the 10 examiner mean for each of the 2 participants. The thought experiment suggesting that using the (inaccurate) scapular tip landmark rule would result in a 3 level targeting and charting error when radiological findings are mapped to the prone position. Physical upright exam procedures like motion palpation would result in a 2 level targeting error for intervention, and a 3 level error for charting. The reliability experiment showed examiners accurately maintained contact with the same thoracic spinous process as the participant went from upright to prone, ICC (2,1) = 0.83. As manual therapists, the authors have emphasized how targeting errors may impact upon manual care of the spine. Practitioners in other fields that need to accurately locate spinal levels, such as acupuncture and anesthesiology, would also be expected to draw important conclusions from these findings.
2014-01-01
Background Upright examination procedures like radiology, thermography, manual muscle testing, and spinal motion palpation may lead to spinal interventions with the patient prone. The reliability and accuracy of mapping upright examination findings to the prone position is unknown. This study had 2 primary goals: (1) investigate how erroneous spine-scapular landmark associations may lead to errors in treating and charting spine levels; and (2) study the interexaminer reliability of a novel method for mapping upright spinal sites to the prone position. Methods Experiment 1 was a thought experiment exploring the consequences of depending on the erroneous landmark association of the inferior scapular tip with the T7 spinous process upright and T6 spinous process prone (relatively recent studies suggest these levels are T8 and T9, respectively). This allowed deduction of targeting and charting errors. In experiment 2, 10 examiners (2 experienced, 8 novice) used an index finger to maintain contact with a mid-thoracic spinous process as each of 2 participants slowly moved from the upright to the prone position. Interexaminer reliability was assessed by computing Intraclass Correlation Coefficient, standard error of the mean, root mean squared error, and the absolute value of the mean difference for each examiner from the 10 examiner mean for each of the 2 participants. Results The thought experiment suggesting that using the (inaccurate) scapular tip landmark rule would result in a 3 level targeting and charting error when radiological findings are mapped to the prone position. Physical upright exam procedures like motion palpation would result in a 2 level targeting error for intervention, and a 3 level error for charting. The reliability experiment showed examiners accurately maintained contact with the same thoracic spinous process as the participant went from upright to prone, ICC (2,1) = 0.83. Conclusions As manual therapists, the authors have emphasized how targeting errors may impact upon manual care of the spine. Practitioners in other fields that need to accurately locate spinal levels, such as acupuncture and anesthesiology, would also be expected to draw important conclusions from these findings. PMID:24904747
Procedures For Microbial-Ecology Laboratory
NASA Technical Reports Server (NTRS)
Huff, Timothy L.
1993-01-01
Microbial Ecology Laboratory Procedures Manual provides concise and well-defined instructions on routine technical procedures to be followed in microbiological laboratory to ensure safety, analytical control, and validity of results.
Borkowski, A; Lee, D H; Sydnor, D L; Johnson, R J; Rabinovitch, A; Moore, G W
2001-01-01
The Pathology and Laboratory Medicine Service of the Veterans Affairs Maryland Health Care System is inspected biannually by the College of American Pathologists (CAP). As of the year 2000, all documentation in the Anatomic Pathology Section is available to all staff through the VA Intranet. Signed, supporting paper documents are on file in the office of the department chair. For the year 2000 CAP inspection, inspectors conducted their document review by use of these Web-based documents, in which each CAP question had a hyperlink to the corresponding section of the procedure manual. Thus inspectors were able to locate the documents relevant to each question quickly and efficiently. The procedure manuals consist of 87 procedures for surgical pathology, 52 procedures for cytopathology, and 25 procedures for autopsy pathology. Each CAP question requiring documentation had from one to three hyperlinks to the corresponding section of the procedure manual. Intranet documentation allows for easier sharing among decentralized institutions and for centralized updates of the laboratory documentation. These documents can be upgraded to allow for multimedia presentations, including text search for key words, hyperlinks to other documents, and images, audio, and video. Use of Web-based documents can improve the efficiency of the inspection process.
NASA Technical Reports Server (NTRS)
1974-01-01
The purpose of the BRAVO User's Manual is to describe the BRAVO methodology in terms of step-by-step procedures. The BRAVO methodology then becomes a tool which a team of analysts can utilize to perform cost effectiveness analyses on potential future space applications with a relatively general set of input information and a relatively small expenditure of resources. An overview of the BRAVO procedure is given by describing the complete procedure in a general form.
The effect of natural ventilation strategy on indoor air quality in schools.
Stabile, Luca; Dell'Isola, Marco; Russi, Aldo; Massimo, Angelamaria; Buonanno, Giorgio
2017-10-01
In order to reduce children's exposure to pollutants in classrooms a proper ventilation strategy need to be adopted. Such strategy is even more important in naturally ventilated schools where the air exchange rate is only based on the manual airing of classrooms. The present work aimed to evaluate the effect of the manual airing strategy on indoor air quality in Italian classrooms. For this aim, schools located in the Central Italy were investigated. Indoor air quality was studied in terms of CO 2 , particle number and PM concentrations and compared to corresponding outdoor levels. In particular two experimental analyses were performed: i) a comparison between heating and non heating season in different schools; ii) an evaluation of the effect of scheduled airing periods on the dilution of indoor-generated pollutants and the penetration of outdoor-generated ones. In particular, different airing procedures, i.e. different window opening periods (5 to 20min per hour) were imposed and controlled through contacts installed on classroom windows and doors. Results revealed that the airing strategy differently affect the several pollutants detected in indoors depending on their size, origin and dynamics. Longer airing periods may result in reduced indoor CO 2 concentrations and, similarly, other gaseous indoor-generated pollutants. Simultaneously, higher ultrafine particle (and other vehicular-related pollutants) levels in indoors were measured due to infiltration from outdoors. Finally, a negligible effect of the manual airing on PM levels in classroom was detected. Therefore, a simultaneous reduction in concentration levels for all the pollutant metrics in classrooms cannot be obtained just relying upon air permeability of the building envelope and manual airing of the classrooms. Copyright © 2017 Elsevier B.V. All rights reserved.
Pumberger, Matthias; Hughes, Alexander P; Girardi, Federico P; Gogia, Jaspaul; Kotwal, Suhel Y; Thaler, Christoph; Sama, Andrew A
2012-12-01
Cadaveric study. The purpose of this study was to assess the influence of surgical experience on the efficiency of lumbar discectomy in open transforaminal lumbar interbody fusion. There is limited knowledge about the efficiency of discectomy among surgeons. As a first study, we are evaluating the effect of surgical experience on it. Manual and powered discectomies were randomized and performed by 3 attending spine surgeons and 2 clinical spine fellows. Each discectomy procedure was analyzed for the area of complete endplate preparation, total elapsed time, and number of instrument passes. The surface area of discectomy at each endplate was measured utilizing digital imaging and the appropriate software. For the purpose of the analysis, the superior and the inferior endplates were divided into ipsilateral and contralateral halves, and each half was further divided into ventral and dorsal quadrants. Each quadrant was analyzed in a blinded manner by 2 observers. A total of 40 discectomies were performed on 9 fresh-frozen cadaveric torsos between the levels T12 and S1. A powered discectomy device was used in levels 9 and 11 by the attendings. Manual discectomy was performed in 11 levels by the spine fellows and 9 by the spine attendings. No significant difference was observed between the spine fellows and spine attendings when the manual instruments were used (P = 0.924). However, the spine attending surgeon group had a significantly increased total area of discectomy compared with the fellows (P = 0.003). No significant difference was observed between the groups when instrument passes or the total elapsed time were compared either utilizing the manual or the powered technique. Our results demonstrate that a satisfactory discectomy may be performed by surgeons with relatively less surgical experience in the transforaminal approach using a powered discectomy device.
References & Resources for Secretaries and Clerical Personnel, 1980. Manual 4200-1.
ERIC Educational Resources Information Center
Van Gelder, Naneene, Ed.
Developed as a resource guide for all secretaries and clerical personnel employed in the San Diego Community College District (SDCCD), this manual provides information on matters ranging from district procedures and office operations to English usage and professional growth. The manual's 21 chapters cover: (1) district history, philosophy, and…
Manual LANDSAT data analysis for crop type identification
NASA Technical Reports Server (NTRS)
Hay, C. M. (Principal Investigator)
1979-01-01
The process of manual identification of crop type by human analysts and problems associated in LACIE that were associated with manual crop identification measurement procedures are described. Research undertaken in cooperation with LACIE operations by the supporting research community to effect solutions to, or obtain greater understanding of the problems is discussed.
Simulated Exercise Physiology Laboratories.
ERIC Educational Resources Information Center
Morrow, James R., Jr.; Pivarnik, James M.
This book consists of a lab manual and computer disks for either Apple or IBM hardware. The lab manual serves as "tour guide" for the learner going through the various lab experiences. The manual contains definitions, proper terminology, and other basic information about physiological principles. It is organized so a step-by-step procedure may be…
ERIC Educational Resources Information Center
Tippett, Glen; Mullen, Vernon
A manual to accompany LINC courses in communications and mathematics, containing information on background, objectives, components, individualized process, and procedures for curriculum development and implementation of LINC Program, is presented. It was formerly referred to as The LINC Program User's Manual. An appendix includes a Reading List…
Process Design Manual for Land Treatment of Municipal Wastewater.
ERIC Educational Resources Information Center
Crites, R.; And Others
This manual presents a procedure for the design of land treatment systems. Slow rate, rapid infiltration, and overland flow processes for the treatment of municipal wastewaters are given emphasis. The basic unit operations and unit processes are discussed in detail, and the design concepts and criteria are presented. The manual includes design…
14 CFR 21.5 - Airplane or Rotorcraft Flight Manual.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Airplane or Rotorcraft Flight Manual. 21.5... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS General § 21.5 Airplane or Rotorcraft Flight Manual. Link to an..., 2010. (a) With each airplane or rotorcraft that was not type certificated with an Airplane or...
ERIC Educational Resources Information Center
Heinrich, Maria Nieves Bumanlag Lilagan
The manual offers a systematic set of procedures and relevant information to facilitate effective use of the Anchorage school district (ASD) bilingual education program (BEP). The historical background of the program's development is presented, available manuals for teaching English to limited English proficiency (LEP) students and related…
Shared Programs between Adjacent School Districts in Bordering States: A Planning Manual.
ERIC Educational Resources Information Center
Bruss, Lyle R.; Bryan, Dennis L.
Specifically organized for the use of school districts that are located adjacent to each other but across state lines, this manual provides guidelines and procedures for determining the feasibility of sharing services across those state boundaries. The activities specified in the manual utilize school district information that is readily…
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-16
... System Test Laboratories Program Manual, Version 2.0 AGENCY: United States Election Assistance Commission (EAC). ACTION: Notice; publication of Voting System Test Laboratories Program Manual, Version 2.0, for 60 day public comment period on EAC Web site. SUMMARY: The U.S. Election Assistance Commission (EAC...
Biology Laboratory Safety Manual.
ERIC Educational Resources Information Center
Case, Christine L.
The Centers for Disease Control (CDC) recommends that schools prepare or adapt a biosafety manual, and that instructors develop a list of safety procedures applicable to their own lab and distribute it to each student. In this way, safety issues will be brought to each student's attention. This document is an example of such a manual. It contains…
Monitoring and Evaluation of Literacy and Continuing Education Programmes. Practitioners' Manual.
ERIC Educational Resources Information Center
United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.
This manual, which is intended for practitioners involved in the Asia and the Pacific Programme of Education for All, explains the basic concepts and procedures involved in monitoring and evaluating literacy and continuing education programs. The following are among the topics discussed in the manual's eight chapters: (1) understanding monitoring…
Measuring moisture content in living chaparral: a field user's manual
Clive M. Countryman; William A. Dean
1979-01-01
This manual standardizes procedures for determining the moisture content of living chaparral for use in a proposed statewide system of monitoring living fuel moisture. The manual includes a comprehensive examination of fuel moisture variations in California chaparral, and describes techniques for sampling these variations. Equipment needed to sample and determine...
ERIC Educational Resources Information Center
McKee, Marlene, Comp.; And Others
A 1982-83 manual on school-based occupational therapy and physical therapy (OT/PT) services in Texas is presented. Contents include: guidelines, evaluation forms, student and therapists' documentation forms, and policy/procedures manuals for a suburban independent school district and a rural independent school district. Part I provides the…
Colorado Outward Bound School River Rafters' Manual.
ERIC Educational Resources Information Center
Leachman, Mark
Instructional sequences, safety rules, duties of crew members, and procedures for Colorado Outward Bound School river rafting trips are summarized in this manual. Designed to acquaint instructors with the duties expected of them on the trips, the information in the manual is presented in outline form and is intended for those with prior river…
NASA Technical Reports Server (NTRS)
Jones, E. B.
1983-01-01
As remote sensing increasingly becomes more of an operational tool in the field of snow management and snow hydrology, there is need for some degree of standardization of ""snowpack ground truth'' techniques. This manual provides a first step in standardizing these procedures and was prepared to meet the needs of remote sensing researchers in planning missions requiring ground truth as well as those providing the ground truth. Focus is on ground truth for remote sensors primarily operating in the microwave portion of the electromagnetic spectrum; nevertheless, the manual should be of value to other types of sensor programs. This first edition of ground truth procedures must be updated as new or modified techniques are developed.
ERIC Educational Resources Information Center
Purrazzella, Kimberly; Mechling, Linda C.
2013-01-01
The study employed a multiple probe design to investigate the effects of computer-based instruction (CBI) and a forward chaining procedure to teach manual spelling of words to three young adults with moderate intellectual disability in a small group arrangement. The computer-based program included a tablet PC whereby students wrote words directly…
WisDOT geotechnical manual development.
DOT National Transportation Integrated Search
2015-02-01
The Wisconsin Department of Transportation currently has a Soils Manual and a Geotechnical Bulletin that provides some guidance : to Regional staff and consulting engineering firms on departmental policy and procedures. However, these two publication...
This Case Resolution Manual (CRM) is intended to provide procedural guidance to ECRCO case managers to ensure EPA’s prompt, effective, and efficient resolution of civil rights cases consistent with science and the civil rights laws.
FDA Bacteriological Analytical Manual, Chapter 10, 2003: Listeria monocytogenes
FDA Bacteriological Analytical Manual, Chapter 10 describes procedures for analysis of food samples and may be adapted for assessment of solid, particulate, aerosol, liquid and water samples containing Listeria monocytogenes.
MICROBIAL LABORATORY GUIDANCE MANUAL FOR THE ...
The Long-Term 2 Enhanced Surface Water Treatment Rule Laboratory Instruction Manual will be a compilation of all information needed by laboratories and field personnel to collect, analyze, and report the microbiological data required under the rule. The manual will provide laboratories with a single source of information that currently is available from various sources including the latest versions of Methods 1622 and 1623, including all approved, equivalent modifications; the procedures for E.coli methods approved for use under the LT2ESWTR; lists of vendor sources; data recording forms; data reporting requirements; information on the Laboratory Quality Assurance Evaluation Program for the Analysis of Cryptosporidium in Water; and sample collection procedures. Although most of this information is available elsewhere, a single, comprehensive compendium containing this information is needed to aid utilities and laboratories performing the sampling and analysis activities required under the LT2 rule. This manual will serve as an instruction manual for laboratories to use when collecting data for Crypto, E. coli and turbidity.
Industrial labor relations manual
NASA Technical Reports Server (NTRS)
1992-01-01
The NASA Industrial Labor Relations Manual provides internal guidelines and procedures to assist NASA Field Installations in dealing with contractor labor management disputes, Service Contract Act variance hearings, and to provide access of Labor Union Representatives to NASA for the purpose of maintaining schedules and goals in connection with vital NASA programs. This manual will be revised by page changes as revisions become necessary. Initial distribution of this manual has been made to NASA Headquarters and Field Installations.
Battery Calendar Life Estimator Manual Modeling and Simulation
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jon P. Christophersen; Ira Bloom; Ed Thomas
2012-10-01
The Battery Life Estimator (BLE) Manual has been prepared to assist developers in their efforts to estimate the calendar life of advanced batteries for automotive applications. Testing requirements and procedures are defined by the various manuals previously published under the United States Advanced Battery Consortium (USABC). The purpose of this manual is to describe and standardize a method for estimating calendar life based on statistical models and degradation data acquired from typical USABC battery testing.
Battery Life Estimator Manual Linear Modeling and Simulation
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jon P. Christophersen; Ira Bloom; Ed Thomas
2009-08-01
The Battery Life Estimator (BLE) Manual has been prepared to assist developers in their efforts to estimate the calendar life of advanced batteries for automotive applications. Testing requirements and procedures are defined by the various manuals previously published under the United States Advanced Battery Consortium (USABC). The purpose of this manual is to describe and standardize a method for estimating calendar life based on statistical models and degradation data acquired from typical USABC battery testing.
Marine safety manual, volume 5 : investigations and enforcement
DOT National Transportation Integrated Search
2008-04-01
This Manual established policies and procedures for the activities associated with the investigation of marine casualties, investigation into recreational boating deaths, detecting violations of criminal and other statutes for law enforcement purpose...
Caltrans : highway design manual
DOT National Transportation Integrated Search
2008-07-01
The Highway Design Manual establishes uniform policies and procedures to carry out the highway design functions of the California Department of Transportation (Caltrans). The policies established herein are for the information and guidance of the off...
AORN Ergonomic Tool 5: Tissue Retraction in the Perioperative Setting.
Spera, Patrice; Lloyd, John D; Hernandez, Edward; Hughes, Nancy; Petersen, Carol; Nelson, Audrey; Spratt, Deborah G
2011-07-01
Manual retraction, a task performed to expose the surgical site, poses a high risk for musculoskeletal disorders that affect the hands, arms, shoulders, neck, and back. In recent years, minimally invasive and laparoscopic procedures have led to the development of multifunctional instruments and retractors capable of performing these functions that, in many cases, has eliminated the need for manual retraction. During surgical procedures that are not performed endoscopically, the use of self-retaining retractors enables the assistant to handle tissue and use exposure techniques that do not require prolonged manual retraction. Ergonomic Tool #5: Tissue Retraction in the Perioperative Setting provides an algorithm for perioperative care providers to determine when and under what circumstances manual retraction of tissue is safe and when the use of a self-retaining retractor should be considered. Published by Elsevier Inc.
Swords, Ronan T; Anguita, Javier; Higgins, Russell A; Yunes, Andrea C; Naski, Michael; Padmanabhan, Swaminathan; Kelly, Kevin R; Mahalingam, Devalingam; Philbeck, Thomas; Miller, Larry; Puga, Tatiana A; Giles, Francis J; Kinney, Marsha C; Brenner, Andrew J
2011-09-01
Bone marrow aspiration and biopsy is an invasive procedure associated with morbidity and mortality risk. We compared a powered bone marrow aspiration and biopsy device to the traditional method by relatively assessing pain scores, procedure times, biopsy capture rates, quality of material retrieved, and safety and operator satisfaction. Two large academic medical centres participated in this trial. Patients were randomised to have procedures carried out using the powered system or the manual technique. A visual analogue scale pain score was recorded immediately following skin puncture and once again at the end of the procedure for each patient. Procedure time was measured from skin puncture to core specimen acquisition. Pathologic assessment of 30 randomised samples was carried out. Operator satisfaction with devices was measured on a scale of 0-10, with 10 as the highest rating. Five operators from two sites enrolled 50 patients (powered, n=25; manual, n=25). Groups were evenly matched, with no significant differences in the means for age, weight and height. The powered system was superior to the manual system with respect to patient perceived pain from needle insertion (2.6±2.0 vs 4.1±2.5, p=0.022) and procedural time (100.0±72.8 s vs 224.1±79.0 s, p<0.001). Overall pain scores at the end of both procedures were comparable (3.2±2.2 vs 3.8±3.0, p=0.438). No complications were observed in either arm of the study. Blinded pathologic analysis of the specimens retrieved revealed that cores obtained using the powered system were longer and wider than those obtained using the manual technique (25.4±12.3 mm² vs 11.9±5.6 mm², p=0.001). For marrow aspiration, no difference was seen between groups for clot/particle spicules or smear spicules. Operator assessment favoured the use of the powered device. Results of this trial suggest that the use of a powered bone marrow biopsy device significantly reduces needle insertion pain and procedural time when compared to a manual technique. The superior size and overall quality of core specimens retrieved by the powered device provides more material for pathologic evaluation, thereby increasing diagnostic yield and reducing the need for repeat procedures.
Financial Reporting and Cost Analysis Manual for Day Care Centers, Head Start, and Other Programs.
ERIC Educational Resources Information Center
Bedger, Jean E.; And Others
This manual is designed to provide fundamental directions for systematic financial reporting and cost analysis for the administrators, accountants, bookkeepers, and staff of day care, Project Head Start, and other programs. The major aims of the manual are to induce day care directors to adopt uniform bookkeeping procedures and to analyze costs…
46 CFR 160.176-5 - Approval procedures.
Code of Federal Regulations, 2010 CFR
2010-10-01
... service manual and written guidelines required by §§ 160.176-19(c) and 160.176-19(d) of the part and the user's manual required by § 160.176-21 of this part. (vi) A list of proposed servicing facilities. (4... manufacturer fails to maintain approved servicing facilities that meet § 160.176-19 of this part. (b) Manuals...
Manpower Information Manual. A Manual for Local Planning.
ERIC Educational Resources Information Center
Allred, Marcus D.; Myers, Christine F.
The step-by-step procedures contained in this manual are intended to develop a simple information system that can be used to collect and process the best possible factual data on the manpower needs of the community served by an educational institution, so that long-range planning of vocational curriculum and guidance can be based on what the jobs…
Guide for preparing active solar heating systems operation and maintenance manuals
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1991-01-01
This book presents a systematic and standardized approach to the preparation of operation and maintenance manuals for active solar heating systems. Provides an industry consensus of the best operating and maintenance procedures for large commercial-scale solar service water and space heating systems. A sample O M manual is included. 3-ring binder included.
DOT National Transportation Integrated Search
1971-01-01
This manual describes a new method developed by the author, based on ASTM Method D2901, for determining the cement content of freshly mixed soil cement. The manual contains information on apparatus, reagents, procedures, source of equipment and reage...
Higher Education Finance Manual. Technical Report No. 53. Field Review Edition.
ERIC Educational Resources Information Center
Collier, Douglas J.
The primary goal of the Higher Education Finance Manual project is to assist in higher education decisionmaking as it relates to the need for and the use of financial information. The objectives of this manual are to: (1) provide uniform definitions and procedures for displaying and reporting those financial data used most often in higher…
Step-by-Step Visual Manuals: Design and Development
ERIC Educational Resources Information Center
Urata, Toshiyuki
2004-01-01
The types of handouts and manuals that are used in technology training vary. Some describe procedures in a narrative way without graphics; some employ step-by-step instructions with screen captures. According to Thirlway (1994), a training manual should be like a tutor that permits a student to learn at his own pace and gives him confidence for…
Manual for Recognizing Sex Bias in Instructional Materials and Administrative Procedures.
ERIC Educational Resources Information Center
Smith, Laveta Johnson, Ed.
This manual was prepared for school administrators and staff in Illinois school districts. Following a statement of the rationale for preparing the manual, a section on discriminatory legislation discusses Title IX of the Education Amendments of 1972 and Public Law 19-597 of Illinois. The next section discusses sex role stereotyping in classroom…
Marine Information Centre Development: An Introductory Manual. Manuals and Guides 23.
ERIC Educational Resources Information Center
Varley, Allan
The purpose of this introductory manual is briefly to explain and put into context the elements involved in marine information center development and operation. Its goal is to provide an overview and create an awareness of the range of the inter-connected procedures, activities, and products that make up an information service. The introductory…
Two Stage Sibling Cycle Compressor/Expander.
1994-02-01
documents, follow the procedures in DoD 5200.22-M, Industrial Security Manual, Section 11-19 or DoD 5200.1 -R, Information Security Program Regulation...procedures in DoD 5200.22-M, Industrial Security Manual, Section 11-19 or DoD 5200.1-R, Information Security Program Regulation, Chapter IX. For...Spae Piston rotation periodically connects channels from expansion/ compresion ces to ports P1Port B2 Heat Exchangers B Piston moves Ports Process Al
NASA Astrophysics Data System (ADS)
Yussup, N.; Ibrahim, M. M.; Rahman, N. A. A.; Mokhtar, M.; Salim, N. A. A.; Soh@Shaari, S. C.; Azman, A.; Lombigit, L.; Azman, A.; Omar, S. A.
2018-01-01
Most of the procedures in neutron activation analysis (NAA) process that has been established in Malaysian Nuclear Agency (Nuclear Malaysia) since 1980s were performed manually. These manual procedures carried out by the NAA laboratory personnel are time consuming and inefficient especially for sample counting and measurement process. The sample needs to be changed and the measurement software needs to be setup for every one hour counting time. Both of these procedures are performed manually for every sample. Hence, an automatic sample changer system (ASC) that consists of hardware and software is developed to automate sample counting process for up to 30 samples consecutively. This paper describes the ASC control software for NAA process which is designed and developed to control the ASC hardware and call GammaVision software for sample measurement. The software is developed by using National Instrument LabVIEW development package.
49 CFR 193.2903 - Security procedures.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 49 Transportation 3 2011-10-01 2011-10-01 false Security procedures. 193.2903 Section 193.2903...: FEDERAL SAFETY STANDARDS Security § 193.2903 Security procedures. Each operator shall prepare and follow one or more manuals of written procedures to provide security for each LNG plant. The procedures must...
49 CFR 193.2903 - Security procedures.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 49 Transportation 3 2010-10-01 2010-10-01 false Security procedures. 193.2903 Section 193.2903...: FEDERAL SAFETY STANDARDS Security § 193.2903 Security procedures. Each operator shall prepare and follow one or more manuals of written procedures to provide security for each LNG plant. The procedures must...
49 CFR 193.2903 - Security procedures.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 49 Transportation 3 2012-10-01 2012-10-01 false Security procedures. 193.2903 Section 193.2903...: FEDERAL SAFETY STANDARDS Security § 193.2903 Security procedures. Each operator shall prepare and follow one or more manuals of written procedures to provide security for each LNG plant. The procedures must...
Code of Federal Regulations, 2011 CFR
1997-01-01
... manual shall have the date of the last revision and revision number on each revised page. The manual must... command before, during, and after completion of a flight; (g) Procedures to be followed by the pilot in...
Hobaiter, Catherine; Byrne, Richard W.
2010-01-01
Chimpanzee culture has generated intense recent interest, fueled by the technical complexity of chimpanzee tool-using traditions; yet it is seriously doubted whether chimpanzees are able to learn motor procedures by imitation under natural conditions. Here we take advantage of an unusual chimpanzee population as a ‘natural experiment’ to identify evidence for imitative learning of this kind in wild chimpanzees. The Sonso chimpanzee community has suffered from high levels of snare injury and now has several manually disabled members. Adult male Tinka, with near-total paralysis of both hands, compensates inability to scratch his back manually by employing a distinctive technique of holding a growing liana taut while making side-to-side body movements against it. We found that seven able-bodied young chimpanzees also used this ‘liana-scratch’ technique, although they had no need to. The distribution of the liana-scratch technique was statistically associated with individuals' range overlap with Tinka and the extent of time they spent in parties with him, confirming that the technique is acquired by social learning. The motivation for able-bodied chimpanzees copying his variant is unknown, but the fact that they do is evidence that the imitative learning of motor procedures from others is a natural trait of wild chimpanzees. PMID:20700527
Kotsuji, F; Nishijima, K; Kurokawa, T; Yoshida, Y; Sekiya, T; Banzai, M; Minakami, H; Udagawa, Y
2013-08-01
To determine the feasibility and safety of transverse fundal incision with manual placental removal in women with placenta praevia and possible placenta accreta. Case series. Four level-three Japanese obstetric centres. Thirty-four women with prior caesarean section and placenta praevia that widely covers the anterior uterine wall, in whom placenta accreta cannot be ruled out. A transverse fundal incision was performed at the time of caesarean section and manual placental removal was attempted under direct observation. Operative fluid loss. The total volume of fluid lost during our operative procedure compares favourably with the volume lost during our routine transverse lower-segment caesarean sections performed in patients without placenta praevia or accreta. The average fluid loss was 1370 g. No patients required transfer to intensive care, and there were no cases of fetal anaemia. This procedure has the potential to reduce the heavy bleeding that arises from caesarean deliveries in women with placenta praevia and placenta accreta. © 2013 The Authors BJOG An International Journal of Obstetrics and Gynaecology © 2013 RCOG.
The biomechanical demands of manual scaling on the shoulders & neck of dental hygienists.
La Delfa, Nicholas J; Grondin, Diane E; Cox, Jocelyn; Potvin, Jim R; Howarth, Samuel J
2017-01-01
The purpose of this study was to evaluate the postural and muscular demands placed on the shoulders and neck of dental hygienists when performing a simulated manual scaling task. Nineteen healthy female dental hygienists performed 30-min of simulated manual scaling on a manikin head in a laboratory setting. Surface electromyography was used to monitor muscle activity from several neck and shoulder muscles, and neck and arm elevation kinematics were evaluated using motion capture. The simulated scaling task resulted in a large range of neck and arm elevation angles and excessive low-level muscular demands in the neck extensor and scapular stabilising muscles. The physical demands varied depending on the working position of the hygienists relative to the manikin head. These findings are valuable in guiding future ergonomics interventions aimed at reducing the physical exposures of dental hygiene work. Practitioner Summary: Given that this study evaluates the physical demands of manual scaling, a procedure that is fundamental to dental hygiene work, the findings are valuable to identify ergonomics interventions to reduce the prevalence of work-related injuries, disability and the potential for early retirement among this occupational group.
Medical Service Clinical Laboratory Procedures--Bacteriology.
ERIC Educational Resources Information Center
Department of the Army, Washington, DC.
This manual presents laboratory procedures for the differentiation and identification of disease agents from clinical materials. Included are procedures for the collection of specimens, preparation of culture media, pure culture methods, cultivation of the microorganisms in natural and simulated natural environments, and procedures in…
17 CFR 39.5 - Review of swaps for Commission determination on clearing requirement.
Code of Federal Regulations, 2012 CFR
2012-04-01
... publicly; (vi) Risk management procedures, including measurement and monitoring of credit exposures, initial and variation margin methodology, methodologies for stress testing and back testing, settlement procedures, and default management procedures; (vii) Applicable rules, manuals, policies, or procedures...
21 CFR 1271.47 - What procedures must I establish and maintain?
Code of Federal Regulations, 2010 CFR
2010-04-01
... HUMAN CELLS, TISSUES, AND CELLULAR AND TISSUE-BASED PRODUCTS Donor Eligibility § 1271.47 What procedures... technical manual prepared by another organization, provided that you have verified that the procedures are...
Safety Policy and Procedure Manual (Electronic Version)
DOT National Transportation Integrated Search
1997-08-18
The state Secretary of Transportation has set a goal of zero accidents for the : North Carolina Department of Transportation (NCDOT). To guide the NCDOT towards : that goal, this safety manual sets for philosophy, goals, cardinal rules : (grounds for...
Long-term pavement performance program manual for profile measurements and processing
DOT National Transportation Integrated Search
2008-11-01
This manual describes operational procedures for measuring longitudinal pavement profiles for the Long-Term Pavement Performance (LTPP) Program using the International Cybernetics Corporation (ICC) road profiler, Face Company Dipstick, and the rod an...
Book Review: Microbial fish disease manual by J. A. Plumb, and P. R. Bowser
Anderson, D.P.
1985-01-01
The authors are faculty members of aquaculture departments in major universities, and as such have compiled a manual for use in teaching laboratory diagnostic procedures for field and research pathologists.
ERIC Educational Resources Information Center
Copeland, William C.; Iversen, Iver A.
This manual, part of a Hecht Institute four-manual series entitled Financing Children's Services Through Title XX and Related Programs, teaches what Title XX regulations are, what they mean, and what actions and procedures are commanded by them. The first section covers the necessity of rule systems, the characteristics of a good rule system and…
High School and Beyond Transcripts Survey (1982). Data File User's Manual. Contractor Report.
ERIC Educational Resources Information Center
Jones, Calvin; And Others
This data file user's manual documents the procedures used to collect and process high school transcripts for a large sample of the younger cohort (1980 sophomores) in the High School and Beyond survey. The manual provides the user with the technical assistance needed to use the computer file and also discusses the following: (1) sample design for…
Users' Manual for Research: Translating Head Start Findings Into Action (Expanded Notebook Version).
ERIC Educational Resources Information Center
Grotberg, Edith H.; Fowler, Austine
This users' manual, intended for use with a Project Head Start teacher training notebook, describes the purpose, development and field testing of the training materials and suggests procedures for using the notebook as a resource in teacher training sessions. The training notebook to which the users' manual refers is based on 11 questions in the…
Procedures of Exercise Physiology Laboratories
NASA Technical Reports Server (NTRS)
Bishop, Phillip A.; Fortney, Suzanne; Greenisen, Michael; Siconolfi, Steven F.; Bamman, Marcas M.; Moore, Alan D., Jr.; Squires, William
1998-01-01
This manual describes the laboratory methods used to collect flight crew physiological performance data at the Johnson Space Center. The Exercise Countermeasures Project Laboratory is a standard physiology laboratory; only the application to the study of human physiological adaptations to spaceflight is unique. In the absence of any other recently published laboratory manual, this manual should be a useful document staffs and students of other laboratories.
ERIC Educational Resources Information Center
Reed, Penny; And Others
The manual serves as a model for school districts developing procedures for supervising and evaluating their therapy services. The narrative is addressed to therapists rather than supervisors so that school districts can photocopy or adapt sections of the manual and assemble customized manuals for therapists in their programs. The first chapter,…
ERIC Educational Resources Information Center
Pragma Corp., Falls Church, VA.
This manual is intended to assist Peace Corps trainers in providing inservice technical training in small enterprise development. The following topics are covered: expectations and sharing of resources, problem analysis as a part of project identification, procedures in setting goals and objectives, steps in identifying project resources, the…
Health Project Management. A Manual of Procedures for Formulating and Implementing Health Projects.
ERIC Educational Resources Information Center
Bainbridge, J.; Sapirie, S.
The manual presents 16 main steps for health project management, from project formulation through termination. The manual defines a health project as a temporary intensive effort to set up and put into operation a new or revised service that will result in the reduction of specific health or health-related problems. (Typical examples include the…
Midterm results after modified Epping procedure for trapeziometacarpal osteoarthritis.
Klein, Silvan M; Breindl, Gisela; Koller, Michael; Mielenz, Melanie; Roll, Christina; Kinner, Bernd; Prantl, Lukas
2013-08-01
Various surgical procedures have been proposed for the treatment of trapeziometacarpal joint (TMJ) osteoarthritis. Despite an overall satisfactory outcome in most cases, some patients complain about inadequate performance at work, due to instability of the TMJ. We present a cross-sectional study of patients with TMJ arthritis who underwent a modified Epping procedure for increased TMJ stability. 71 patients underwent a modified Epping procedure with a flexor carpi radialis tendon sling stabilizer. 59 patients were followed up after a mean time of 38 months. Residual pain was evaluated by visual analog scale. Functional outcome was quantified by pinch and grip strength, static two-point discrimination test, as well as DASH outcome scoring. Quality of life measures included patients' perceived satisfaction, activities of daily living (ADL), grip/pinch force and manual performance at work. 85 % of the patients regained full or partial manual performance during labor. Strength and ADL improved or remained the same in 81 %. In cases of a unilateral treatment, no difference in grip between the operated and nonoperated hand was observed. Mean tip pinch strength was 2.8 kg for the operated and 3.6 kg for the nonoperated hand. Mean pain level during rest was 0.98, 0.95 during mild activity, and 3.70 during strenuous activity. Mean DASH score was 26.6. The great majority of patients who underwent this novel procedure benefited from an unaffected or improved work performance, due to good TMJ stability combined with adequate motion for ADL. Less favorable results were seen in patients with accompanying hand pathologies.
Vrooman, Henri A; Cocosco, Chris A; van der Lijn, Fedde; Stokking, Rik; Ikram, M Arfan; Vernooij, Meike W; Breteler, Monique M B; Niessen, Wiro J
2007-08-01
Conventional k-Nearest-Neighbor (kNN) classification, which has been successfully applied to classify brain tissue in MR data, requires training on manually labeled subjects. This manual labeling is a laborious and time-consuming procedure. In this work, a new fully automated brain tissue classification procedure is presented, in which kNN training is automated. This is achieved by non-rigidly registering the MR data with a tissue probability atlas to automatically select training samples, followed by a post-processing step to keep the most reliable samples. The accuracy of the new method was compared to rigid registration-based training and to conventional kNN-based segmentation using training on manually labeled subjects for segmenting gray matter (GM), white matter (WM) and cerebrospinal fluid (CSF) in 12 data sets. Furthermore, for all classification methods, the performance was assessed when varying the free parameters. Finally, the robustness of the fully automated procedure was evaluated on 59 subjects. The automated training method using non-rigid registration with a tissue probability atlas was significantly more accurate than rigid registration. For both automated training using non-rigid registration and for the manually trained kNN classifier, the difference with the manual labeling by observers was not significantly larger than inter-observer variability for all tissue types. From the robustness study, it was clear that, given an appropriate brain atlas and optimal parameters, our new fully automated, non-rigid registration-based method gives accurate and robust segmentation results. A similarity index was used for comparison with manually trained kNN. The similarity indices were 0.93, 0.92 and 0.92, for CSF, GM and WM, respectively. It can be concluded that our fully automated method using non-rigid registration may replace manual segmentation, and thus that automated brain tissue segmentation without laborious manual training is feasible.
Masson, Igor F B; de Oliveira, Bruna D A; Machado, Aline Fernanda Perez; Farcic, Thiago Saikali; Júnior, Ivaldo Esteves; Baldan, Cristiano Schiavinato
2014-01-01
Physiotherapy in the plastic surgery post-operative (PO) is essential to provide means for an adequate and fast recovery as it restores function through the use of physiotherapeutic procedures. The aim of the following study is to verify the effects of the association between the manual lymphatic drainage and the therapeutic ultrasound on pain, oedema and the tissue fibrosis in liposuction and lipoabdominoplasty PO. This is a clinical trial prospective. Eighteen women aged between 18 and 60 years participated in this study, in the late PO period following lipoabdominoplasty or liposuction in the abdomen, flanks and lower trunk, which showed tissue fibrosis of the flanks and abdomen regions. They were divided into two groups: Liposuction group and lipoabdominoplasty group. A total of twelve sessions of therapeutic ultrasound followed by the manual lymphatic drainage were performed. The patients were assessed with regard to pain, oedema and tissue fibrosis in different moments: Initial assessment, during assessment and final assessment through the application of the protocol of evaluation of cysts fibrosis levels. The test of equality for two proportions and the confidence interval test for mean to evaluate the distribution of variables. The significance level adopted for statistical tests was 5% (P < 0.05). There was a statistically significant reduction of pain, swelling and tissue fibrosis in both groups. the association between manual lymphatic drainage and the therapeutic ultrasound reduced the swelling and the tissue fibrosis and made pain disappear in liposuction and lipoabdominoplasty PO period.
Ground Software Maintenance Facility (GSMF) user's manual
NASA Technical Reports Server (NTRS)
Aquila, V.; Derrig, D.; Griffith, G.
1986-01-01
Instructions for the Ground Software Maintenance Facility (GSMF) system user is provided to operate the GSMF in all modes. The GSMF provides the resources for the Automatic Test Equipment (ATE) computer program maintenance (GCOS and GOAL). Applicable reference documents are listed. An operational overview and descriptions of the modes in terms of operator interface, options, equipment, material utilization, and operational procedures are contained. Test restart procedures are described. The GSMF documentation tree is presented including the user manual.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 18 Conservation of Power and Water Resources 2 2014-04-01 2014-04-01 false Procedure. 401.23 Section 401.23 Conservation of Power and Water Resources DELAWARE RIVER BASIN COMMISSION ADMINISTRATIVE MANUAL RULES OF PRACTICE AND PROCEDURE Water Resources Program § 401.23 Procedure. Each project included...
Code of Federal Regulations, 2010 CFR
2010-04-01
... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Procedure. 401.23 Section 401.23 Conservation of Power and Water Resources DELAWARE RIVER BASIN COMMISSION ADMINISTRATIVE MANUAL RULES OF PRACTICE AND PROCEDURE Water Resources Program § 401.23 Procedure. Each project included...
Code of Federal Regulations, 2012 CFR
2012-04-01
... 18 Conservation of Power and Water Resources 2 2012-04-01 2012-04-01 false Procedure. 401.23 Section 401.23 Conservation of Power and Water Resources DELAWARE RIVER BASIN COMMISSION ADMINISTRATIVE MANUAL RULES OF PRACTICE AND PROCEDURE Water Resources Program § 401.23 Procedure. Each project included...
Code of Federal Regulations, 2013 CFR
2013-04-01
... 18 Conservation of Power and Water Resources 2 2013-04-01 2012-04-01 true Procedure. 401.23 Section 401.23 Conservation of Power and Water Resources DELAWARE RIVER BASIN COMMISSION ADMINISTRATIVE MANUAL RULES OF PRACTICE AND PROCEDURE Water Resources Program § 401.23 Procedure. Each project included...
Code of Federal Regulations, 2011 CFR
2011-04-01
... 18 Conservation of Power and Water Resources 2 2011-04-01 2011-04-01 false Procedure. 401.23 Section 401.23 Conservation of Power and Water Resources DELAWARE RIVER BASIN COMMISSION ADMINISTRATIVE MANUAL RULES OF PRACTICE AND PROCEDURE Water Resources Program § 401.23 Procedure. Each project included...
Fraser, John J; Glaviano, Neal R; Hertel, Jay
2017-02-01
Study Design Retrospective observational study. Background Plantar fasciitis is responsible for 1 million ambulatory patient care visits annually in the United States. Few studies have investigated practice patterns in the treatment of patients with plantar fasciitis. Objective To assess physical therapist utilization and employment of manual therapy and supervised rehabilitation in the treatment of patients with plantar fasciitis. Methods A retrospective review of the PearlDiver patient record database was used to evaluate physical therapist utilization and use of manual therapy and supervised rehabilitation in patients with plantar fasciitis between 2007 and 2011. An International Classification of Diseases code (728.71) was used to identify plantar fasciitis, and Current Procedural Terminology codes were used to identify evaluations (97001), manual therapy (97140), and rehabilitation services (97110, 97530, 97112). Results A total of 819 963 unique patients diagnosed with plantar fasciitis accounted for 5 739 737 visits from 2007 to 2011, comprising 2.7% of all patients in the database. Only 7.1% (95% confidence interval: 7.0%, 7.1%) of patients received a physical therapist evaluation. Of the 57 800 patients evaluated by a physical therapist (59.8% female), 50 382 (87.2% ± 0.4%) received manual therapy, with significant increases in utilization per annum. A large proportion (89.5% ± 0.4%) received rehabilitation following physical therapist evaluation. Conclusion Despite plantar fasciitis being a frequently occurring musculoskeletal condition, a small proportion of patients with plantar fasciitis were seen by physical therapists. Most patients who were evaluated by a physical therapist received manual therapy and a course of supervised rehabilitation as part of their plan of care. Level of Evidence Treatment, level 2a. J Orthop Sports Phys Ther 2017;47(2):49-55. doi:10.2519/jospt.2017.6999.
Elias, Nassim Chamel; Goyos, Celso; Saunders, Muriel; Saunders, Richard
2008-01-01
The objective of this study was to teach manual signs through an automated matching-to-sample procedure and to test for the emergence of new conditional relations and imitative behaviors. Seven adults with mild to severe mental retardation participated. Four were also hearing impaired. Relations between manual signs (set A) and pictures (set B) were initially taught, followed by the training of corresponding printed words (set C) and pictures (set B). Further presentations of conditional discriminations tested for the emergence of AC, followed by tests for the emergence of imitative signing behavior (D) in the presence of either pictures (B) or printed words (C). Each stimulus set was comprised of 9 elements. The stimuli were still pictures, printed words, and dynamic presentations of manual signs. A pretest was conducted to determine which signs the participants could make pre-experimentally. Teaching was arranged in a multiple baseline design across 3 groups of 3 words each. The purpose of the present study was to determine whether participants would emit manual signs in expressive signs tests as a result of observation (video modeling) during match-to-sample training in the absence of explicit training. Five of the 7 subjects passed tests of emergence and emitted at least 50% of the signs. Two were hearing impaired with signing experience, and 3 were not hearing impaired and had no signing experience. Thus, observation of video recorded manual signs in a matching-to-sample training procedure was effective at establishing some signs by adults with mental retardation. PMID:22477400
Projects procedure guide : sampling frequencies for materials testing and inspection
DOT National Transportation Integrated Search
2002-02-01
The Bureau of Materials and Physical Research's Project Procedures Guide (PPG) is used as a resource for determining reasonable inspection procedures and sampling frequencies for materials used in highway construction. This Manual seeks to establish ...
Weissbach, T; Haikin-Herzberger, E; Bacci-Hugger, K; Shechter-Maor, G; Fejgin, M; Biron-Shental, T
2015-09-01
Approximately 1% of term deliveries are complicated by retained products of conception. Untreated, this condition may cause bleeding, infection and intrauterine adhesions. This study assessed whether performing routine bedside uterine ultrasound immediately after manual removal of the placenta reduced the occurrence of undiagnosed, retained products of conception and its associated complications. A retrospective study was conducted using the records of patients who delivered and underwent manual removal of placenta at a single obstetrics center over a 6-year period. The outcomes of patients who were assessed using immediate bedside ultrasound were compared to a similar group who were treated based on clinical evaluation alone. All patients underwent ultrasound examination prior to discharge. Outcome variables included the rate of additional interventions (medical or surgical), abnormal pre-discharge uterine ultrasound findings, postpartum hemorrhage rate, puerperal fever and length of hospital stay. A total of 399 charts were reviewed. Immediate post-procedural ultrasound was performed in 235 patients. The remaining 164 women did not undergo immediate post-procedural ultrasound. All patients underwent an ultrasound examination prior to discharge. Among the patients who had an immediate post-procedural ultrasound, 12 (5.1%) received immediate re-intervention (2 methergine, 6 curettage and 4 manual uterine revision) vs. no intervention in the second group (p<0.001). No statistically significant difference was found between the group of patients who had immediate post-procedural ultrasound and those who did not, in the rates of postpartum hemorrhage (3.1% vs. 0.7%, p=0.13), abnormal ultrasound findings prior to discharge (14.9% vs. 14.8%, p=0.96) or additional late intervention (7.2% vs. 7.9%, p=0.79), respectively. Our findings suggest that immediate, bedside uterine ultrasound examination after manual removal of placenta might not change patient outcomes. Furthermore, it might increase unnecessary interventions. Further studies are needed to prospectively assess the benefit of routine uterine ultrasound examination after manual removal of placenta. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.
What is the learning curve for robotic-assisted pedicle screw placement in spine surgery?
Hu, Xiaobang; Lieberman, Isador H
2014-06-01
Some early studies with robotic-assisted pedicle screw implantation have suggested these systems increase accuracy of screw placement. However, the relationship between the success rate of screw placement and the learning curve of this new technique has not been evaluated. We determined whether, as a function of surgeon experience, (1) the success rate of robotic-assisted pedicle screw placement improved, (2) the frequency of conversion from robotic to manual screw placement decreased, and (3) the frequency of malpositioned screws decreased. Between June 2010 and August 2012, the senior surgeon (IHL) performed 174 posterior spinal procedures using pedicle screws, 162 of which were attempted with robotic assistance. The use of the robotic system was aborted in 12 of the 162 procedures due to technical issues (registration failure, software crash, etc). The robotic system was successfully used in the remaining 150 procedures. These were the first procedures performed with the robot by the senior surgeon, and in this study, we divided the early learning curve into five groups: Group 1 (Patients 1-30), Group 2 (Patients 31-60), Group 3 (Patients 61-90), Group 4 (Patients 91-120), and Group 5 (Patients 121-150). One hundred twelve patients (75%) had spinal deformity and 80 patients (53%) had previous spine surgery. The accuracy of screw placement in the groups was assessed based on intraoperative biplanar fluoroscopy and postoperative radiographs. The results from these five groups were compared to determine the effect on the learning curve. The numbers of attempted pedicle screw placements were 359, 312, 349, 359, and 320 in Groups 1 to 5, respectively. The rates of successfully placed screws using robotic guidance were 82%, 93%, 91%, 95%, and 93% in Groups 1 to 5. The rates of screws converted to manual placement were 17%, 7%, 8%, 4%, and 7%. Of the robotically placed screws, the screw malposition rates were 0.8%, 0.3%, 1.4%, 0.8%, and 0%. The rate of successfully placed pedicle screws improved with increasing experience. The rate of the screws that were converted to manual placement decreased with increasing experience. The frequency of screw malposition was similar over the learning curve at 0% to 1.4%. Future studies will need to determine whether this finding is generalizable to others. Level III, therapeutic study. See the Instructions for Authors for a complete description of levels of evidence.
Manual for research, development and technology program and project evaluations : final report.
DOT National Transportation Integrated Search
2016-04-01
This manual provides the Federal Railroad Administrations (FRA) Office of Research, Development and Technology (RD&T) a : framework, standards, and procedures for planning, conducting, reporting, and using sound evaluations of RD&Ts projects fo...
Reporting Manual for Florida Community Colleges.
ERIC Educational Resources Information Center
Florida State Board of Community Colleges, Tallahassee.
Uniform procedures, terminology, definitions, forms, and instructions are presented to aid individual Florida community colleges in completing state reporting requirements. Following introductory information concerning the Community College Management Information System (CCMIS) the manual explains the purpose and characteristics of the Community…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Orendorff, Christopher; Lamb, Joshua; Steele, Leigh Anna Marie
This report describes recommended abuse testing procedures for rechargeable energy storage systems (RESSs) for electric vehicles. This report serves as a revision to the FreedomCAR Electrical Energy Storage System Abuse Test Manual for Electric and Hybrid Electric Vehicle Applications (SAND2005-3123).
Alaska IPASS database preparation manual.
P. McHugh; D. Olson; C. Schallau
1989-01-01
Describes the data, their sources, and the calibration procedures used in compiling a database for the Alaska IPASS (interactive policy analysis simulation system) model. Although this manual is for Alaska, it provides generic instructions for analysts preparing databases for other geographical areas.
Use of Semi-Autonomous Tools for ISS Commanding and Monitoring
NASA Technical Reports Server (NTRS)
Brzezinski, Amy S.
2014-01-01
As the International Space Station (ISS) has moved into a utilization phase, operations have shifted to become more ground-based with fewer mission control personnel monitoring and commanding multiple ISS systems. This shift to fewer people monitoring more systems has prompted use of semi-autonomous console tools in the ISS Mission Control Center (MCC) to help flight controllers command and monitor the ISS. These console tools perform routine operational procedures while keeping the human operator "in the loop" to monitor and intervene when off-nominal events arise. Two such tools, the Pre-positioned Load (PPL) Loader and Automatic Operators Recorder Manager (AutoORM), are used by the ISS Communications RF Onboard Networks Utilization Specialist (CRONUS) flight control position. CRONUS is responsible for simultaneously commanding and monitoring the ISS Command & Data Handling (C&DH) and Communications and Tracking (C&T) systems. PPL Loader is used to uplink small pieces of frequently changed software data tables, called PPLs, to ISS computers to support different ISS operations. In order to uplink a PPL, a data load command must be built that contains multiple user-input fields. Next, a multiple step commanding and verification procedure must be performed to enable an onboard computer for software uplink, uplink the PPL, verify the PPL has incorporated correctly, and disable the computer for software uplink. PPL Loader provides different levels of automation in both building and uplinking these commands. In its manual mode, PPL Loader automatically builds the PPL data load commands but allows the flight controller to verify and save the commands for future uplink. In its auto mode, PPL Loader automatically builds the PPL data load commands for flight controller verification, but automatically performs the PPL uplink procedure by sending commands and performing verification checks while notifying CRONUS of procedure step completion. If an off-nominal condition occurs during procedure execution, PPL Loader notifies CRONUS through popup messages, allowing CRONUS to examine the situation and choose an option of how PPL loader should proceed with the procedure. The use of PPL Loader to perform frequent, routine PPL uplinks offloads CRONUS to better monitor two ISS systems. It also reduces procedure performance time and decreases risk of command errors. AutoORM identifies ISS communication outage periods and builds commands to lock, playback, and unlock ISS Operations Recorder files. Operation Recorder files are circular buffer files of continually recorded ISS telemetry data. Sections of these files can be locked from further writing, be played back to capture telemetry data that occurred during an ISS loss of signal (LOS) period, and then be unlocked for future recording use. Downlinked Operation Recorder files are used by mission support teams for data analysis, especially if failures occur during LOS. The commands to lock, playback, and unlock Operations Recorder files are encompassed in three different operational procedures and contain multiple user-input fields. AutoORM provides different levels of automation for building and uplinking the commands to lock, playback, and unlock Operations Recorder files. In its automatic mode, AutoORM automatically detects ISS LOS periods, then generates and uplinks the commands to lock, playback, and unlock Operations Recorder files when MCC regains signal with ISS. AutoORM also features semi-autonomous and manual modes which integrate CRONUS more into the command verification and uplink process. AutoORMs ability to automatically detect ISS LOS periods and build the necessary commands to preserve, playback, and release recorded telemetry data greatly offloads CRONUS to perform more high-level cognitive tasks, such as mission planning and anomaly troubleshooting. Additionally, since Operations Recorder commands contain numerical time input fields which are tedious for a human to manually build, AutoORM's ability to automatically build commands reduces operational command errors. PPL Loader and AutoORM demonstrate principles of semi-autonomous operational tools that will benefit future space mission operations. Both tools employ different levels of automation to perform simple and routine procedures, thereby offloading human operators to perform higher-level cognitive tasks. Because both tools provide procedure execution status and highlight off-nominal indications, the flight controller is able to intervene during procedure execution if needed. Semi-autonomous tools and systems that can perform routine procedures, yet keep human operators informed of execution, will be essential in future long-duration missions where the onboard crew will be solely responsible for spacecraft monitoring and control.
Shachak, Aviv; Dow, Rustam; Barnsley, Jan; Tu, Karen; Domb, Sharon; Jadad, Alejandro R; Lemieux-Charles, Louise
2013-06-04
Tutorials and user manuals are important forms of impersonal support for using software applications including electronic medical records (EMRs). Differences between user- and vendor documentation may indicate support needs, which are not sufficiently addressed by the official documentation, and reveal new elements that may inform the design of tutorials and user manuals. What are the differences between user-generated tutorials and manuals for an EMR and the official user manual from the software vendor? Effective design of tutorials and user manuals requires careful packaging of information, balance between declarative and procedural texts, an action and task-oriented approach, support for error recognition and recovery, and effective use of visual elements. No previous research compared these elements between formal and informal documents. We conducted an mixed methods study. Seven tutorials and two manuals for an EMR were collected from three family health teams and compared with the official user manual from the software vendor. Documents were qualitatively analyzed using a framework analysis approach in relation to the principles of technical documentation described above. Subsets of the data were quantitatively analyzed using cross-tabulation to compare the types of error information and visual cues in screen captures between user- and vendor-generated manuals. The user-developed tutorials and manuals differed from the vendor-developed manual in that they contained mostly procedural and not declarative information; were customized to the specific workflow, user roles, and patient characteristics; contained more error information related to work processes than to software usage; and used explicit visual cues on screen captures to help users identify window elements. These findings imply that to support EMR implementation, tutorials and manuals need to be customized and adapted to specific organizational contexts and workflows. The main limitation of the study is its generalizability. Future research should address this limitation and may explore alternative approaches to software documentation, such as modular manuals or participatory design.
Perspectives on three issues facing the transportation manager in the nineties. Research report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lewis, C.A.; Marzette, D.; McCoy, B.
1999-03-01
The nineties have been a period of tremendous change for the transportation industry. The Intermodal Surface Transportation Efficiency Act, Clean Air Act Amendments, Americans with Disabilities Act, and increasing gender and ethnic diversity have caused agencies to reassess their standard operating procedures. Greater knowledge has been sought by senior level transportation officials in an effort to prepare agencies for the changing policy, including, seminars and workshops, revisions to policy manuals, and strengthened procedures regarding how issues will be resolved. This research examines the level and nature of direct impacts on the transportation organization. Major legislative changes and mandates have imposedmore » the need for changes in how transportation systems operate. Transportation professionals continue to be challenged to develop plans and implement services that respond to mandates within the framework of the legislation.« less
Functional-to-form mapping for assembly design automation
NASA Astrophysics Data System (ADS)
Xu, Z. G.; Liu, W. M.; Shen, W. D.; Yang, D. Y.; Liu, T. T.
2017-11-01
Assembly-level function-to-form mapping is the most effective procedure towards design automation. The research work mainly includes: the assembly-level function definitions, product network model and the two-step mapping mechanisms. The function-to-form mapping is divided into two steps, i.e. mapping of function-to-behavior, called the first-step mapping, and the second-step mapping, i.e. mapping of behavior-to-structure. After the first step mapping, the three dimensional transmission chain (or 3D sketch) is studied, and the feasible design computing tools are developed. The mapping procedure is relatively easy to be implemented interactively, but, it is quite difficult to finish it automatically. So manual, semi-automatic, automatic and interactive modification of the mapping model are studied. A mechanical hand F-F mapping process is illustrated to verify the design methodologies.
NASA Astrophysics Data System (ADS)
Shin, W. H.; Park, T. J.
2017-06-01
Radiation technology is closely related to the industrial growth and the creation of employment in Korea. The techniques as radiation or/and radioactivity measurement, and the practical skills achieving a higher level analysis are required. In this study, practice manual for liquid scintillation counter were developed by job analysis. Raw data applied in job analysis are collected by on/off line survey by 420 workers employed in KOREA. Importance-priority analysis was performed to make duties and competency unit that consists of knowledge, skills as each task. Refined data was reviewed by expert who experienced actual duties on site. Classification was conducted by focus group interview to deduct duties and competency unit. From the radiation devices in measurement and analysis, liquid scintillation counter was preferentially selected because of the high demands for training. Investigation of build-up status to liquid scintillation counter in KOREA was conducted. Then technical specification and operating procedure of 2 main devices were analyzed and integrated by practice manual. Duties and competency unit were applied to integrated materials respectively. To validate effectiveness, test curriculum was designed by the advanced course to workers who engaged in radiation measurement and analysis. The developed manual is structured to take advantage of test training. This manual will be a practical handbook that can improve the knowledge, skills of radiation workers in Korea.
NASA Technical Reports Server (NTRS)
Guasp, Edwin; Manzo, Michelle A.
1997-01-01
Secondary alkaline batteries, such as nickel-cadmium and silver-zinc, are commonly used for aerospace applications. The uniform evaluation and comparison of separator properties for these systems is dependent upon the measurement techniques. This manual presents a series of standard test procedures that can be used to evaluate, compare, and select separator materials for use in alkaline batteries. Detailed test procedures evaluating the following characteristics are included in this manual: physical measurements of thickness and area weight, dimensional stability measurements, electrolyte retention, resistivity, permeability as measured via bubble pressure, surface evaluation via SEM, chemical stability, and tensile strength.
49 CFR 193.2503 - Operating procedures.
Code of Federal Regulations, 2013 CFR
2013-10-01
...: FEDERAL SAFETY STANDARDS Operations § 193.2503 Operating procedures. Each operator shall follow one or more manuals of written procedures to provide safety in normal operation and in responding to an... 49 Transportation 3 2013-10-01 2013-10-01 false Operating procedures. 193.2503 Section 193.2503...
49 CFR 193.2503 - Operating procedures.
Code of Federal Regulations, 2011 CFR
2011-10-01
...: FEDERAL SAFETY STANDARDS Operations § 193.2503 Operating procedures. Each operator shall follow one or more manuals of written procedures to provide safety in normal operation and in responding to an... 49 Transportation 3 2011-10-01 2011-10-01 false Operating procedures. 193.2503 Section 193.2503...
49 CFR 193.2503 - Operating procedures.
Code of Federal Regulations, 2014 CFR
2014-10-01
...: FEDERAL SAFETY STANDARDS Operations § 193.2503 Operating procedures. Each operator shall follow one or more manuals of written procedures to provide safety in normal operation and in responding to an... 49 Transportation 3 2014-10-01 2014-10-01 false Operating procedures. 193.2503 Section 193.2503...
49 CFR 193.2503 - Operating procedures.
Code of Federal Regulations, 2012 CFR
2012-10-01
...: FEDERAL SAFETY STANDARDS Operations § 193.2503 Operating procedures. Each operator shall follow one or more manuals of written procedures to provide safety in normal operation and in responding to an... 49 Transportation 3 2012-10-01 2012-10-01 false Operating procedures. 193.2503 Section 193.2503...
Nursing Procedures. NAVMED P-5066.
ERIC Educational Resources Information Center
Bureau of Medicine and Surgery (Navy), Washington, DC.
The revised manual of nursing procedures covers fundamental nursing care, admission and discharge of the patient, assisting with therapeutic measures, pre- and postoperative care, diagnostic tests and procedures, and isolation technique. Each of the over 300 topics includes the purpose, equipment, and procedure to be used and, where relevant, such…
A Pathway to Continued Success on the Job. A Final Report, July 1, 1998-June 30, 1999 [and] Product.
ERIC Educational Resources Information Center
Cort, Maureen A.; Pappalardo, Michele F.; Gonzalez, Manuel A.
This manual was developed by a project to create a model program that integrates basic skills instruction with requirements of welfare reform, and the project's final report describes activities taken to develop the manual. The report details the problem, goals, procedures, objectives met and not met, and an evaluation. The manual is designed to…
ERIC Educational Resources Information Center
Schmitt, Carl M.; O'Shae, Patricia; Vaden, Kaleen; Williams, Jeffrey W.
2007-01-01
This manual describes the methods, procedures, techniques, and activities that were used to produce the Academic Library Survey of 2004 (ALS:2004). This manual is designed to provide guidance and documentation for users of the ALS data. Included in the manual are the following: an overview of the study and its predecessor studies; an account of…
Long term pavement performance directive : non-automated dipstick longitudinal measurement procedure
DOT National Transportation Integrated Search
1996-11-25
The following procedure for longitudinal profile measurements on LTPP test sections, using nonautomated Dipsticks, should be used on all test sections requiring manual measurement of the : longitudinal profile. This is a replacement for the procedure...
The Evolution of Utilizing Manual Throttles to Avoid Excessively Low LH2 NPSP at the SSME Inlet
NASA Technical Reports Server (NTRS)
Henfling, Rick
2011-01-01
In the late 1970s, years before the Space Shuttle flew its maiden voyage, it was understood low liquid hydrogen (LH2) Net Positive Suction Pressure (NPSP) at the inlet to the Space Shuttle Main Engine (SSME) could have adverse effects on engine operation. A number of failures within both the External Tank (ET) and the Orbiter Main Propulsion System (MPS) could result in a low LH2 NPSP condition, which at extremely low levels can result in cavitation of SSME turbomachinery. Operational workarounds were developed to take advantage of the onboard crew s ability to manually throttle down the SSMEs (via the Pilot s Speedbrake/Throttle Controller), which alleviated the low LH2 NPSP condition. Manually throttling the SSME to a lower power level resulted in an increase in NPSP, mainly due to the reduction in frictional flow losses while at the lower throttle setting. Early in the Space Shuttle Program s history, the relevant Flight Rule for the Booster flight controllers in Mission Control did not distinguish between ET and Orbiter MPS failures and the same crew action was taken for both. However, after a review of all Booster operational techniques following the Challenger disaster in the late 1980s, it was determined manually throttling the SSME to a lower power was only effective for Orbiter MPS failures and the Flight Rule was updated to reflect this change. The Flight Rule and associated crew actions initially called for a single throttle step to minimum power level when a low threshold for NPSP was met. As engineers refined their understanding of the NPSP requirements for the SSME (through a robust testing program), the operational techniques evolved to take advantage of the additional capabilities. This paper will examine the evolution of the Flight rule and associated procedure and how increases in knowledge about the SSME and the Space Shuttle vehicle as a whole have helped shape their development. What once was a single throttle step when NPSP decreased to a certain threshold has now become three throttle steps, each occurring at a lower NPSP threshold. Additionally the procedure, which for early Space Shuttle missions required a Return-to-Launch-Site abort, now results in a nominal Main Engine Cut Off and no loss of mission objectives.
The Evolution of Utilizing Manual Throttling to Avoid Excessively Low LH2 NPSP at the SSME Inlet
NASA Technical Reports Server (NTRS)
Henfling, Rick
2010-01-01
In the late 1970s, years before the Space Shuttle flew its maiden voyage, it was understood low liquid hydrogen (LH2) Net Positive Suction Pressure (NPSP) at the inlet to the Space Shuttle Main Engine (SSME) could have adverse effects on engine operation. A number of failures within both the External Tank (ET) and the Orbiter Main Propulsion System (MPS) could result in a low LH2 NPSP condition, which at extremely low levels can result in cavitation of SSME turbomachinery. Operational workarounds were developed to take advantage of the onboard crew s ability to manually throttle down the SSMEs (via the Pilot s Speedbrake/Throttle Controller), which alleviated the low LH2 NPSP condition. Manually throttling the SSME to a lower power level resulted in an increase in NPSP, mainly due to the reduction in frictional flow losses while at the lower throttle setting. Early in the Space Shuttle Program s history, the relevant Flight Rule for the Booster flight controller in Mission Control did not distinguish between ET and Orbiter MPS failures and the same crew action was taken for both. However, after a review of all Booster operational techniques following the Challenger disaster in the late 1980s, it was determined manually throttling the SSME to a lower power was only effective for Orbiter MPS failures and the Flight Rule was updated to reflect this change. The Flight Rule and associated crew actions initially called for a single throttle step to minimum power level when a low threshold for NPSP was met. As engineers refined their understanding of the NPSP requirements for the SSME (through a robust testing program), the operational techniques evolved to take advantage of the additional capabilities. This paper will examine the evolution of the Flight rule and associated procedure and how increases in knowledge about the SSME and the Space Shuttle vehicle as a whole have helped shape their development. What once was a single throttle step when NPSP decreased to a certain low threshold has now become three throttle steps, each occurring at a lower NPSP threshold. Additionally the procedure, which for early Space Shuttle missions required a Return-to-Launch-Site abort, now results in a nominal Main Engine Cut Off and no loss of mission objectives.
1991-10-01
procedures and techniques to measure flood damage and to further implement the Principles and Guidelines of the U.S. Water Resources Council. This manual... guidelines for using the OMB approved questionnaires are provided in Engineer Regulation 1105-2-100. The compendium provides the analyst with a helpful...question content, the analyst must also comply with OMB guidelines concerning implementation of the Privacy Act of 1974 (P.L. 93-579). This Act requires
Load research manual. Volume 2: Fundamentals of implementing load research procedures
NASA Astrophysics Data System (ADS)
1980-11-01
This manual will assist electric utilities and state regulatory authorities in investigating customer electricity demand as part of cost-of-service studies, rate design, marketing research, system design, load forecasting, rate reform analysis, and load management research. Load research procedures are described in detail. Research programs at three utilities are compared: Carolina Power and Light Company, Long Island Lighting Company, and Southern California Edison Company. A load research bibliography and glossaries of load research and statistical terms are also included.
Phipps, Hala; de Vries, Brad; Jagadish, Ujvala; Hyett, Jon
2014-03-01
The management of the occiput posterior (OP) position has been controversial for many years. Manual rotation can be performed by midwives and could reduce cesarean sections and instrumental births. We aimed to determine current midwifery views, knowledge, and practice of manual rotation. A de-identified, self-reported questionnaire was e-mailed to all Australian College of Midwives full members (n = 3,997). Of 3,182 surveyed, 57 percent (1,817) responded, of whom 51 percent (920) were currently practicing midwifery. Seventy-seven percent of midwives thought that manual rotation at full dilatation was a valid intervention. Sixty-four percent stated the procedure was acceptable before instrumental delivery, but 30 percent were unsure. Most practicing midwives (93%) had heard of manual rotation, but only 18 percent had performed one in the last year. Midwives would support the routine performance of manual rotation for OP position if it reduced operative births from 68 to 50 percent and would support manual rotation for occiput transverse (OT) position if it reduced operative births from 39 to 25 percent. This study indicates that manual rotation is considered acceptable by most midwives in Australia, yet is only performed by a minority. Midwives would be willing to perform prophylactic manual rotation if it was known to facilitate normal vaginal births suggesting a scope to introduce this procedure into widespread clinical practice. © 2014, Copyright the Authors Journal compilation © 2014, Wiley Periodicals, Inc.
Guidelines for cone penetration test : performance and design
DOT National Transportation Integrated Search
1978-07-01
This manual presents procedures and guidelines applicable to the use of the cone penetration test. Dr. Schmertmann prepared this manual in February 1977 and made minor additions in May 1978. It represents his interpretation of the state-of-the-art in...
24 CFR 3282.204 - IPIA services.
Code of Federal Regulations, 2010 CFR
2010-04-01
... DEVELOPMENT MANUFACTURED HOME PROCEDURAL AND ENFORCEMENT REGULATIONS Manufacturer Inspection and Certification... DAPIA approved design and the quality assurance manual for that plant, and the IPIA shall perform an... to conform with the DAPIA approved designs and manuals. After the corrections required by the...
Training Manuals and Technical Publications.
ERIC Educational Resources Information Center
Army Test and Evaluation Command, Aberdeen Proving Ground, MD.
The objective of the Materiel Test Procedure is to describe methods for determining the need for adequacy of comprehensiveness, and clarity of training manuals and technical publications (or other pertinent types of literature) relating to the ammunition or ammunition components being tested. (Author)
Instruction manual for operating the Sensys System for temporary traffic counts
DOT National Transportation Integrated Search
2010-01-01
This instruction manual provides information and the procedures for using the Sensys System, which was initially designed to operate in a server controlled network, for temporary traffic counts. The instructions will allow the user to fully understan...
29 CFR 1926.1080 - Safe practices manual.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION Diving General Operations Procedures § 1926.1080 Safe practices manual. Note: The requirements applicable to construction work under this section are...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-09
... provisions of the Administrative Procedures Act (APA). It is a voluntary effort by the EAC to gather input... the APA's rulemaking provisions applicable to development of this or future EAC procedural programs...
Fully automated muscle quality assessment by Gabor filtering of second harmonic generation images
NASA Astrophysics Data System (ADS)
Paesen, Rik; Smolders, Sophie; Vega, José Manolo de Hoyos; Eijnde, Bert O.; Hansen, Dominique; Ameloot, Marcel
2016-02-01
Although structural changes on the sarcomere level of skeletal muscle are known to occur due to various pathologies, rigorous studies of the reduced sarcomere quality remain scarce. This can possibly be explained by the lack of an objective tool for analyzing and comparing sarcomere images across biological conditions. Recent developments in second harmonic generation (SHG) microscopy and increasing insight into the interpretation of sarcomere SHG intensity profiles have made SHG microscopy a valuable tool to study microstructural properties of sarcomeres. Typically, sarcomere integrity is analyzed by fitting a set of manually selected, one-dimensional SHG intensity profiles with a supramolecular SHG model. To circumvent this tedious manual selection step, we developed a fully automated image analysis procedure to map the sarcomere disorder for the entire image at once. The algorithm relies on a single-frequency wavelet-based Gabor approach and includes a newly developed normalization procedure allowing for unambiguous data interpretation. The method was validated by showing the correlation between the sarcomere disorder, quantified by the M-band size obtained from manually selected profiles, and the normalized Gabor value ranging from 0 to 1 for decreasing disorder. Finally, to elucidate the applicability of our newly developed protocol, Gabor analysis was used to study the effect of experimental autoimmune encephalomyelitis on the sarcomere regularity. We believe that the technique developed in this work holds great promise for high-throughput, unbiased, and automated image analysis to study sarcomere integrity by SHG microscopy.
Cooperative Education. Instructor Coordinator's Manual.
ERIC Educational Resources Information Center
Farrow, Shirley
Designed to provide an introduction to North Lake College's (NLC's) Cooperative Education Program, this manual contains information for the instructor/coordinator regarding the Dallas County Community College District's co-op policies and NLC's operational procedures and forms. First, section 1 defines cooperative education, states NLC's…
Locomotive cab design development. volume 2 : operator's manual - Interim Report
DOT National Transportation Integrated Search
1976-10-01
Locomotive Cab 913 designed as a result of Contract DOT-TSC- 913 has been built as a hard mock-up. This Operator's Manual is to familiarize the user with the mock-up. Normal and emergency procedures and cab facilities are described.
Student Attendance Accounting Manual.
ERIC Educational Resources Information Center
Freitas, Joseph M.
In response to state legislation authorizing procedures for changes in academic calendars and measurement of student workload in California community colleges, this manual from the Chancellor's Office provides guidelines for student attendance accounting. Chapter 1 explains general items such as the academic calendar, admissions policies, student…
California School Accounting Manual. 1984 Edition.
ERIC Educational Resources Information Center
Lundin, Janet, Ed.
California's official school accounting procedures, amended in 1984 to clarify definitions and improve program cost accounting, are presented. Following an introduction that discusses general characteristics of school accounting, the manual explains the following areas of accounting practice: (1) financial reporting; (2) income; (3) expenditures;…
STORAGE/SEDIMENTATION FACILITIES FOR CONTROL OF STORM AND COMBINED SEWER OVERFLOW: DESIGN MANUAL
This manual describes applications of storage facilities in wet-weather flow management and presents step-by-step procedures for analysis and design of storage-treatment facilities. Retention, detention, and sedimentation storage information is classified and described. Internati...
PROCESS DESIGN MANUAL: LAND TREATMENT OF MUNICIPAL WASTEWATER
The manual presents a rational procedure for the design of land treatment systems. Slow rate, rapid infiltration, and overland flow processes for the treatment of municipal wastewaters are discussed in detail, and the design concepts and criteria are presented. A two-phased plann...
Spectrophotometric Titration of a Mixture of Calcium and Magnesium.
ERIC Educational Resources Information Center
Fulton, Robert; And Others
1986-01-01
Describes a spectrophotometric titration experiment which uses a manual titration spectrophotometer and manually operated buret, rather than special instrumentation. Identifies the equipment, materials, and procedures needed for the completion of the experiment. Recommends the use of this experiment in introductory quantitative analysis…
DOT National Transportation Integrated Search
2004-08-01
This report is the second of a two-part publication entitled "Seismic Retrofitting Manual for Highway Structures". Part 2 includes new procedures for determining the seismic vulnerability of other important highway system structures, namely, retainin...
Chemistry laboratory safety manual available
NASA Technical Reports Server (NTRS)
Elsbrock, R. G.
1968-01-01
Chemistry laboratory safety manual outlines safe practices for handling hazardous chemicals and chemistry laboratory equipment. Included are discussions of chemical hazards relating to fire, health, explosion, safety equipment and procedures for certain laboratory techniques and manipulations involving glassware, vacuum equipment, acids, bases, and volatile solvents.
Children's Health Services Manual. Revised Edition.
ERIC Educational Resources Information Center
South Carolina State Dept. of Health and Environmental Control, Columbia.
This manual for South Carolina's child health personnel covers program planning, evaluation, monitoring, and administration, and provides standards, procedures, policies, and regulations concerning health services for children in the state. An initial section on children's health services covers eligibility; the Women, Infants and Children…
TADS Needs Assessment Procedures Manual, Summer 1980.
ERIC Educational Resources Information Center
Black, Talbot; And Others
The TADS (Technical Assistance Development System) Needs Assessment Manual is designed to guide the comprehensive review of Handicapped Children's Early Education Program (HCEEP) demonstration projects in identifying technical assistance needs. An introduction reviews the TADS technical assistance model which includes program planning, needs…
The procedure execution manager and its application to Advanced Photon Source operation
DOE Office of Scientific and Technical Information (OSTI.GOV)
Borland, M.
1997-06-01
The Procedure Execution Manager (PEM) combines a complete scripting environment for coding accelerator operation procedures with a manager application for executing and monitoring the procedures. PEM is based on Tcl/Tk, a supporting widget library, and the dp-tcl extension for distributed processing. The scripting environment provides support for distributed, parallel execution of procedures along with join and abort operations. Nesting of procedures is supported, permitting the same code to run as a top-level procedure under operator control or as a subroutine under control of another procedure. The manager application allows an operator to execute one or more procedures in automatic, semi-automatic,more » or manual modes. It also provides a standard way for operators to interact with procedures. A number of successful applications of PEM to accelerator operations have been made to date. These include start-up, shutdown, and other control of the positron accumulator ring (PAR), low-energy transport (LET) lines, and the booster rf systems. The PAR/LET procedures make nested use of PEM`s ability to run parallel procedures. There are also a number of procedures to guide and assist tune-up operations, to make accelerator physics measurements, and to diagnose equipment. Because of the success of the existing procedures, expanded use of PEM is planned.« less
78 FR 21074 - Airworthiness Directives; Bombardier, Inc. Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-09
... the maintenance requirements manual (MRM) by incorporating procedures for repetitive functional tests... the new tests, removing of the existing procedures for the repetitive functional tests from the MRM...
Use of Severity of Illness Indexes for Assessing Health Care Provider Performance
1985-07-01
Exclusive reliance on manual selection of the inpatient records would have proven difficult and time consuming. Appendix B contains correspondence...presence of mortalities or complications following surgery. Results obtained from the two-fold PASBA screen and manual selection process represent a...information provided include the last four numbers of each patient’s social security number, register number, procedure and occurrence found. A manual
ERIC Educational Resources Information Center
Braught, Loran, Comp.
This manual was developed as one outcome of a 2-year experimental project conducted in 53 school districts in Indiana (1990-92). The manual was designed to be a resource to schools interested in operating a successful "Students' Own Bookshop" program to encourage development of literacy and leadership among the students of their school.…
Golbaz, Isabelle; Ahlers, Christian; Goesseringer, Nina; Stock, Geraldine; Geitzenauer, Wolfgang; Prünte, Christian; Schmidt-Erfurth, Ursula Margarethe
2011-03-01
This study compared automatic- and manual segmentation modalities in the retina of healthy eyes using high-definition optical coherence tomography (HD-OCT). Twenty retinas in 20 healthy individuals were examined using an HD-OCT system (Carl Zeiss Meditec, Inc.). Three-dimensional imaging was performed with an axial resolution of 6 μm at a maximum scanning speed of 25,000 A-scans/second. Volumes of 6 × 6 × 2 mm were scanned. Scans were analysed using a matlab-based algorithm and a manual segmentation software system (3D-Doctor). The volume values calculated by the two methods were compared. Statistical analysis revealed a high correlation between automatic and manual modes of segmentation. The automatic mode of measuring retinal volume and the corresponding three-dimensional images provided similar results to the manual segmentation procedure. Both methods were able to visualize retinal and subretinal features accurately. This study compared two methods of assessing retinal volume using HD-OCT scans in healthy retinas. Both methods were able to provide realistic volumetric data when applied to raster scan sets. Manual segmentation methods represent an adequate tool with which to control automated processes and to identify clinically relevant structures, whereas automatic procedures will be needed to obtain data in larger patient populations. © 2009 The Authors. Journal compilation © 2009 Acta Ophthalmol.
Aircraft noise prediction program user's manual
NASA Technical Reports Server (NTRS)
Gillian, R. E.
1982-01-01
The Aircraft Noise Prediction Program (ANOPP) predicts aircraft noise with the best methods available. This manual is designed to give the user an understanding of the capabilities of ANOPP and to show how to formulate problems and obtain solutions by using these capabilities. Sections within the manual document basic ANOPP concepts, ANOPP usage, ANOPP functional modules, ANOPP control statement procedure library, and ANOPP permanent data base. appendixes to the manual include information on preparing job decks for the operating systems in use, error diagnostics and recovery techniques, and a glossary of ANOPP terms.
Template for updating regulations in QA manuals
DOE Office of Scientific and Technical Information (OSTI.GOV)
White, M.G.; Banerjee, B.
1992-01-01
Recently, the U.S. Department of Energy (DOE) issued new quality assurance (QA) orders to reflect current policies for conduct and operation of DOE-authorized programs and facilities. Establishing traceability to new QA criteria and requirements from former multidraft orders, QA manuals, and guidance documentation for DOE-funded work can be confusing. Identified critical considerations still must be addressed. Most of the newly stated QA criteria can be cross referenced, where applicable, to former QA plans and manuals. Where additional criteria occur, new procedures may be required, together with revisions in QA plans and manuals.
Developing an orientation program.
Edwards, K
1999-01-01
When the local area experienced tremendous growth and change, the radiology department at Maury Hospital in Columbia, Tennessee looked seriously at its orientation process in preparation for hiring additional personnel. It was an appropriate time for the department to review its orientation process and to develop a manual to serve as both a tool for supervisors and an ongoing reference for new employees. To gather information for the manual, supervisors were asked to identify information they considered vital for new employees to know concerning the daily operations of the department, its policies and procedures, the organizational structure of the hospital, and hospital and departmental computer systems. That information became the basis of the orientation manual, and provided an introduction to the hospital and radiology department; the structure of the organization; an overview of the radiology department; personnel information; operating procedures and computer systems; and various policies and procedures. With the manual complete, the radiology department concentrated on an orientation process that would meet the needs of supervisors who said they had trouble remembering the many details necessary to teach new employees. A pre-orientation checklist was developed, which contained the many details supervisors must handle between the time an employee is hired and arrives for work. The next step was the creation of a checklist for use by the supervisor during a new employee's first week on the job. A final step in the hospital's orientation program is to have each new employee evaluate the entire orientation process. That information is then used to update and revise the manual.
Miyazaki, Shinsuke; Shah, Ashok J; Xhaët, Olivier; Derval, Nicolas; Matsuo, Seiichiro; Wright, Matthew; Nault, Isabelle; Forclaz, Andrei; Jadidi, Amir S; Knecht, Sébastien; Rivard, Lena; Liu, Xingpeng; Linton, Nick; Sacher, Frédéric; Hocini, Mélèze; Jaïs, Pierre; Haïssaguerre, Michel
2010-12-01
The remote magnetic navigation system (MNS) has been used with a nonirrigated magnetic catheter for atrial fibrillation (AF) ablation. The objective of this study was to evaluate the feasibility and efficiency of the newly available irrigated tip magnetic catheter for index pulmonary vein isolation (PVI) in patients with paroxysmal AF (PAF). Between January 2008 and June 2009, 30 consecutive patients with drug-resistant PAF underwent circular mapping catheter-guided PVI with MNS (MNS group). The outcomes were compared retrospectively with those of a conventional hand-controlled ablation technique during the same period in 44 consecutive patients (manual group). All 4 pulmonary veins were successfully isolated in both groups except in 4 patients in the MNS group. Radiofrequency and procedure duration were higher in the MNS group (60 ± 27 versus 43 ± 16 minutes; P = 0.0019) than in the manual group (246 ± 50 versus 153 ± 51 minutes; P < 0.0001). In the patients who underwent only PVI, total fluoroscopic time also was longer in the MNS group than in the manual group (58 ± 24 versus 40 ± 14 minutes; P = 0.0002). At 12-month follow-up after a single procedure, 69.0% of the patients in MNS group and 61.8% of patients in manual group were free of atrial tachyarrhythmia without antiarrhythmic drugs. There was no significant difference in the atrial tachyarrhythmia-free survival between the 2 groups (P = 0.961). Cardiac tamponade occurred in 1 patient in the manual group. In patients with PAF, MNS-guided PVI with the newly available irrigated tip magnetic catheter backed up with manual ablation whenever required is feasible. However, it requires longer ablation, fluoroscopy, and procedural times than the conventional approach in the early experience stage.
Development of an improved overlay procedure for Oregon : volume III, field manual.
DOT National Transportation Integrated Search
1987-12-01
This report is the third in a three-volume series dealing with the development of an improved overlay design procedure for Oregon. This report presents technical guidelines for using the proposed overlay design procedure. Four areas are described, in...
49 CFR 572.190 - Incorporated materials.
Code of Federal Regulations, 2012 CFR
2012-10-01
... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES IIsD Side Impact Crash Test... procedures manual entitled, “Procedures for Assembly, Disassembly, and Inspection (PADI) of the SID-IIsD Side...
49 CFR 572.190 - Incorporated materials.
Code of Federal Regulations, 2014 CFR
2014-10-01
... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES SID-IIsD Side Impact Crash... procedures manual entitled, “Procedures for Assembly, Disassembly, and Inspection (PADI) of the SID-IIsD Side...
49 CFR 572.190 - Incorporated materials.
Code of Federal Regulations, 2013 CFR
2013-10-01
... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES SID-IIsD Side Impact Crash... procedures manual entitled, “Procedures for Assembly, Disassembly, and Inspection (PADI) of the SID-IIsD Side...
7 CFR 91.23 - Analytical methods.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 7 Agriculture 3 2014-01-01 2014-01-01 false Analytical methods. 91.23 Section 91.23 Agriculture... SERVICES AND GENERAL INFORMATION Method Manuals § 91.23 Analytical methods. Most analyses are performed according to approved procedures described in manuals of standardized methodology. These standard methods...
7 CFR 91.23 - Analytical methods.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 7 Agriculture 3 2011-01-01 2011-01-01 false Analytical methods. 91.23 Section 91.23 Agriculture... SERVICES AND GENERAL INFORMATION Method Manuals § 91.23 Analytical methods. Most analyses are performed according to approved procedures described in manuals of standardized methodology. These standard methods...
7 CFR 91.23 - Analytical methods.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 7 Agriculture 3 2013-01-01 2013-01-01 false Analytical methods. 91.23 Section 91.23 Agriculture... SERVICES AND GENERAL INFORMATION Method Manuals § 91.23 Analytical methods. Most analyses are performed according to approved procedures described in manuals of standardized methodology. These standard methods...
14 CFR 171.153 - Requests for IFR procedure.
Code of Federal Regulations, 2010 CFR
2010-01-01
... and maintenance manual that meets the requirement of § 171.161. (4) A statement of intention to meet... operational reliability and an acceptable standard of performance. Previous equivalent operational experience... maintenance manual or maintenance organization. The owner must then correct the deficiencies, if any, and...
SHAWNEE LIME/LIMESTONE SCRUBBING COMPUTERIZED DESIGN/COST-ESTIMATE MODEL USERS MANUAL
The manual gives a general description of the Shawnee lime/limestone scrubbing computerized design/cost-estimate model and detailed procedures for using it. It describes all inputs and outputs, along with available options. The model, based on Shawnee Test Facility scrubbing data...
General Drafting. Technical Manual.
ERIC Educational Resources Information Center
Department of the Army, Washington, DC.
The manual provides instructional guidance and reference material in the principles and procedures of general drafting and constitutes the primary study text for personnel in drafting as a military occupational specialty. Included is information on drafting equipment and its use; line weights, conventions and formats; lettering; engineering charts…
ERIC Educational Resources Information Center
Gill, Wanda E.
A tutor training program manual that is used at Bowie State College is presented. The manual covers the following: tutoring program objectives; general tutoring principles; general procedures the tutor should follow; including contacting the student and establishing rapport, guidelines concerning the tutors' attitudes and behavior; a few points to…
ERIC Educational Resources Information Center
National PTA, Chicago, IL.
This updated version of a 1977 manual provides information about the television industry, communications regulations, and citizen recourse to improper broadcasting procedures for use in training Parent Teacher Association (PTA) volunteers to work for effective change within the television industry. The first section discusses the operations of the…
Stationary Engineering Science Manual--3.
ERIC Educational Resources Information Center
Steingress, Frederick M.; And Others
This manual provides in-depth coverage of topics related to boiler operations. The assignments contain an objective, descriptive information, reference sources, procedures, and assignments. Sixteen units are provided and address topics such as: (1) steam engineering concepts; (2) boiler fittings; (3) feed-water, steam, and combustion accessories;…
33 CFR 203.51 - Levee owner's manual.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Levee owner's manual. 203.51 Section 203.51 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE EMERGENCY EMPLOYMENT OF ARMY AND OTHER RESOURCES, NATURAL DISASTER PROCEDURES Rehabilitation...
33 CFR 203.51 - Levee owner's manual.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Levee owner's manual. 203.51 Section 203.51 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE EMERGENCY EMPLOYMENT OF ARMY AND OTHER RESOURCES, NATURAL DISASTER PROCEDURES Rehabilitation...
33 CFR 203.51 - Levee owner's manual.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Levee owner's manual. 203.51 Section 203.51 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE EMERGENCY EMPLOYMENT OF ARMY AND OTHER RESOURCES, NATURAL DISASTER PROCEDURES Rehabilitation...
33 CFR 203.51 - Levee owner's manual.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Levee owner's manual. 203.51 Section 203.51 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE EMERGENCY EMPLOYMENT OF ARMY AND OTHER RESOURCES, NATURAL DISASTER PROCEDURES Rehabilitation...
33 CFR 203.51 - Levee owner's manual.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 33 Navigation and Navigable Waters 3 2014-07-01 2014-07-01 false Levee owner's manual. 203.51 Section 203.51 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE EMERGENCY EMPLOYMENT OF ARMY AND OTHER RESOURCES, NATURAL DISASTER PROCEDURES Rehabilitation...
Vocational Education Readiness Test Manual.
ERIC Educational Resources Information Center
Thomas, Edward L.; And Others
This manual provides vocational instructors in public schools with standardized procedures in the form of a Vocational Education Readiness Test (VERT) for assessing the vocational potential of educable mentally handicapped (EMR) secondary school students. The various stages of VERT's development are traced: (1) visits with vocational trade…
ERIC Educational Resources Information Center
Milevski, Robert J.
1995-01-01
This book repair manual developed for the Illinois Cooperative Conservation Program includes book structure and book problems, book repair procedures for 4 specific problems, a description of adhesive bindings, a glossary, an annotated list of 11 additional readings, book repair supplies and suppliers, and specifications for book repair kits. (LRW)
LOGISTIC MANAGEMENT INFORMATION SYSTEM - MANUAL DATA STORAGE AND RETRIEVAL SYSTEM.
Logistics Management Information System . The procedures are applicable to manual storage and retrieval of all data used in the Logistics Management ... Information System (LMIS) and include the following: (1) Action Officer data source file. (2) Action Officer presentation format file. (3) LMI Coordination
Regents Examinations and Competency Tests: School Administrator's Manual. 1981 Edition.
ERIC Educational Resources Information Center
New York State Education Dept., Albany. Bureau of Elementary and Secondary Educational Testing.
Intended for use by school administrators, guidance counselors, teachers, and proctors, this manual contains general information on Regents examinations and competency tests. Specifically, the regulations and procedures for ordering, administering, and rating these examinations are described. Information is also included about the competency…
Regents Examinations & Competency Tests: School Administrator's Manual. 1983 Edition.
ERIC Educational Resources Information Center
New York State Education Dept., Albany. Bureau of Elementary and Secondary Testing Programs.
Intended for use by school administrators, guidance counselors, teachers, and proctors, this manual contains general information on Regents examinations and competency tests. Specifically, the regulations and procedures for ordering, administering, rating, and reporting results of these examinations are described. Information is also included…
Wearable Sensors for eLearning of Manual Tasks: Using Forearm EMG in Hand Hygiene Training
Kutafina, Ekaterina; Laukamp, David; Bettermann, Ralf; Schroeder, Ulrik; Jonas, Stephan M.
2016-01-01
In this paper, we propose a novel approach to eLearning that makes use of smart wearable sensors. Traditional eLearning supports the remote and mobile learning of mostly theoretical knowledge. Here we discuss the possibilities of eLearning to support the training of manual skills. We employ forearm armbands with inertial measurement units and surface electromyography sensors to detect and analyse the user’s hand motions and evaluate their performance. Hand hygiene is chosen as the example activity, as it is a highly standardized manual task that is often not properly executed. The World Health Organization guidelines on hand hygiene are taken as a model of the optimal hygiene procedure, due to their algorithmic structure. Gesture recognition procedures based on artificial neural networks and hidden Markov modeling were developed, achieving recognition rates of 98.30% (±1.26%) for individual gestures. Our approach is shown to be promising for further research and application in the mobile eLearning of manual skills. PMID:27527167
Wearable Sensors for eLearning of Manual Tasks: Using Forearm EMG in Hand Hygiene Training.
Kutafina, Ekaterina; Laukamp, David; Bettermann, Ralf; Schroeder, Ulrik; Jonas, Stephan M
2016-08-03
In this paper, we propose a novel approach to eLearning that makes use of smart wearable sensors. Traditional eLearning supports the remote and mobile learning of mostly theoretical knowledge. Here we discuss the possibilities of eLearning to support the training of manual skills. We employ forearm armbands with inertial measurement units and surface electromyography sensors to detect and analyse the user's hand motions and evaluate their performance. Hand hygiene is chosen as the example activity, as it is a highly standardized manual task that is often not properly executed. The World Health Organization guidelines on hand hygiene are taken as a model of the optimal hygiene procedure, due to their algorithmic structure. Gesture recognition procedures based on artificial neural networks and hidden Markov modeling were developed, achieving recognition rates of 98 . 30 % ( ± 1 . 26 % ) for individual gestures. Our approach is shown to be promising for further research and application in the mobile eLearning of manual skills.
Manual of analytical methods for the Environmental Health Laboratory
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gray, C. E.
1975-06-01
This manual was compiled from techniques used In the Environmental Health Laboratory of Sandia Laboratories at Albuquerque. New Mexico, and is a revision of an earlier publication (SC-M-07-3044) edited by Lial W. Brewer. The procedures arc similar to those used in other laboratories devoted to Environmental Health practices. Some of the methods are standard and others are modified to suit our needs; others were developed at Sandia. The author has attempted to present all methods in a simple and concise manner, but in sufficient detail to make them readily usable. It is not inferred that the methods are universal formore » any type of sample, but they have been found very reliable for the types of samples mentioned. The author will welcome inquiry for clarification of any part of this manual. It is the desire of the author that this manual will be of use and service to others. New and revised procedures will be issued as supplements to this document.« less
Nölker, Georg; Schwagten, Bruno; Deville, J Brian; Burkhardt, J David; Horton, Rodney P; Sha, Qun; Tomassoni, Gery
2016-03-01
Circular mapping catheters (CMC) are an essential tool in most atrial fibrillation ablation procedures. The Vdrive™ with V-Loop™ system enables a physician to remotely manipulate a CMC during electrophysiology studies. Our aim was to compare the clinical performance of the system to conventional CMC navigation according to efficiency and safety endpoints. A total of 120 patients scheduled to undergo a CMC study followed by pulmonary vein isolation (PVI) were included. Treatment allocation was randomized 2:1, remote navigation:manual navigation. The primary effectiveness endpoint was assessed based on both successful navigation to the targeted pulmonary vein (PV) and successful recording of PV electrograms. All PVs were treated independently within and between patients. The primary safety endpoint was assessed based on the occurrence of major adverse events (MAEs) through seven days after the study procedure. Primary effectiveness endpoints were achieved in 295/302 PVs in the Vdrive arm (97.7%) and 167/167 PVs in the manual arm (100%). Effectiveness analysis indicates Vdrive non-inferiority (pnon-inferiority = 0.0405; δ = -0.05) per the Cochran-Mantel-Haenszel test adjusted for PV correlation. Five MAEs related to the ablation procedure occurred (three in the Vdrive arm-3.9%; two in the manual arm-2.33%). No device-related MAEs were observed; safety analysis indicates Vdrive non-inferiority (pnon-inferiority = 0.0441; δ = 0.07) per the normal Z test. Remote navigation of a CMC is equivalent to manual in PVI in terms of safety and effectiveness. This allows for single-operator procedures in conjunction with a magnetically guided ablation catheter. © 2016 Wiley Periodicals, Inc.
Review of manual control methods for handheld maneuverable instruments.
Fan, Chunman; Dodou, Dimitra; Breedveld, Paul
2013-06-01
By the introduction of new technologies, surgical procedures have been varying from free access in open surgery towards limited access in minimal access surgery. Improving access to difficult-to-reach anatomic sites, e.g. in neurosurgery or percutaneous interventions, needs advanced maneuverable instrumentation. Advances in maneuverable technology require the development of dedicated methods enabling surgeons to stay in direct, manual control of these complex instruments. This article gives an overview of the state-of-the-art in the development of manual control methods for handheld maneuverable instruments. It categorizes the manual control methods in three levels: a) number of steerable segments, b) number of Degrees Of Freedom (DOF), and c) coupling between control motion of the handle and steering motion of the tip. The literature research was completed by using Web of Science, Scopus and PubMed. The study shows that in controlling single steerable segments, direct as well as indirect control methods have been developed, whereas in controlling multiple steerable segments, a gradual shift can be noticed from parallel and serial control to integrated control. The development of multi-segmented maneuverable instruments is still at an early stage, and an intuitive and effective method to control them has to become a primary focus in the domain of minimal access surgery.
Validation of Living Donor Nephrectomy Codes
Lam, Ngan N.; Lentine, Krista L.; Klarenbach, Scott; Sood, Manish M.; Kuwornu, Paul J.; Naylor, Kyla L.; Knoll, Gregory A.; Kim, S. Joseph; Young, Ann; Garg, Amit X.
2018-01-01
Background: Use of administrative data for outcomes assessment in living kidney donors is increasing given the rarity of complications and challenges with loss to follow-up. Objective: To assess the validity of living donor nephrectomy in health care administrative databases compared with the reference standard of manual chart review. Design: Retrospective cohort study. Setting: 5 major transplant centers in Ontario, Canada. Patients: Living kidney donors between 2003 and 2010. Measurements: Sensitivity and positive predictive value (PPV). Methods: Using administrative databases, we conducted a retrospective study to determine the validity of diagnostic and procedural codes for living donor nephrectomies. The reference standard was living donor nephrectomies identified through the province’s tissue and organ procurement agency, with verification by manual chart review. Operating characteristics (sensitivity and PPV) of various algorithms using diagnostic, procedural, and physician billing codes were calculated. Results: During the study period, there were a total of 1199 living donor nephrectomies. Overall, the best algorithm for identifying living kidney donors was the presence of 1 diagnostic code for kidney donor (ICD-10 Z52.4) and 1 procedural code for kidney procurement/excision (1PC58, 1PC89, 1PC91). Compared with the reference standard, this algorithm had a sensitivity of 97% and a PPV of 90%. The diagnostic and procedural codes performed better than the physician billing codes (sensitivity 60%, PPV 78%). Limitations: The donor chart review and validation study was performed in Ontario and may not be generalizable to other regions. Conclusions: An algorithm consisting of 1 diagnostic and 1 procedural code can be reliably used to conduct health services research that requires the accurate determination of living kidney donors at the population level. PMID:29662679
14 CFR 135.23 - Manual contents.
Code of Federal Regulations, 2010 CFR
2010-01-01
... in command in the briefing under § 135.117; (l) Flight locating procedures, when applicable; (m... § 135.123; (n) En route qualification procedures for pilots, when applicable; (o) The approved aircraft...
Cable median barrier maintenance manual.
DOT National Transportation Integrated Search
2008-08-01
This implementation guide describes the conceptual framework, data requirements, and computational procedures for determining the safety and mobility impacts of work zones in Texas. Researchers designed the framework and procedures to assist district...
7 CFR 983.152 - Failed lots/rework procedure.
Code of Federal Regulations, 2010 CFR
2010-01-01
... Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE PISTACHIOS GROWN IN CALIFORNIA... mechanical, electronic, or manual procedures normally used in the handling of pistachios. After the rework... rework procedure for aflatoxin. If pistachio kernel rework is selected as a remedy to meet the aflatoxin...
18 CFR 401.84 - Hearing procedure.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 18 Conservation of Power and Water Resources 2 2011-04-01 2011-04-01 false Hearing procedure. 401.84 Section 401.84 Conservation of Power and Water Resources DELAWARE RIVER BASIN COMMISSION ADMINISTRATIVE MANUAL RULES OF PRACTICE AND PROCEDURE Administrative and Other Hearings § 401.84 Hearing...
49 CFR 383.131 - Test procedures.
Code of Federal Regulations, 2010 CFR
2010-10-01
... provide standardized scoring sheets for the skills tests, as well as standardized driving instructions for... 49 Transportation 5 2010-10-01 2010-10-01 false Test procedures. 383.131 Section 383.131... STANDARDS; REQUIREMENTS AND PENALTIES Tests § 383.131 Test procedures. (a) Driver information manuals...
Sustainability of the prevention of passive infant smoking within well-baby clinics.
Crone, M R; Verlaan, M; Willemsen, M C; van Soelen, P; Reijneveld, S A; Sing, R A Hira; Paulussen, T G W M
2006-04-01
This study assessed the antecedents of continued use of an education program to prevent passive smoking in infants. It consists of a booklet for parents and a manual for health professionals describing a five-step procedure for discussing passive smoking. A questionnaire was sent to 67 managers, 670 nurses, and 335 physicians working in well-baby clinics (response rate: 70%, 53%, 47% respectively). Questions concerned the completeness of use, level of institutionalization, and characteristics of the organization, the user, and the dissemination strategy. Seventy-one percent of nurses and 42% of physicians worked with the program. They foremost provided the first three steps of the five-step procedure. Physicians' completeness of use was related to their perceived responsibility in providing this education, and nurses' use was related to their perceived self-efficacy, responsibility, training attendance, participation in the adoption decision, and level of institutionalization. Diffusion efforts should focus on improving the completeness of use and level of institutionalization.
Modular Engine Noise Component Prediction System (MCP) Program Users' Guide
NASA Technical Reports Server (NTRS)
Golub, Robert A. (Technical Monitor); Herkes, William H.; Reed, David H.
2004-01-01
This is a user's manual for Modular Engine Noise Component Prediction System (MCP). This computer code allows the user to predict turbofan engine noise estimates. The program is based on an empirical procedure that has evolved over many years at The Boeing Company. The data used to develop the procedure include both full-scale engine data and small-scale model data, and include testing done by Boeing, by the engine manufacturers, and by NASA. In order to generate a noise estimate, the user specifies the appropriate engine properties (including both geometry and performance parameters), the microphone locations, the atmospheric conditions, and certain data processing options. The version of the program described here allows the user to predict three components: inlet-radiated fan noise, aft-radiated fan noise, and jet noise. MCP predicts one-third octave band noise levels over the frequency range of 50 to 10,000 Hertz. It also calculates overall sound pressure levels and certain subjective noise metrics (e.g., perceived noise levels).
ERIC Educational Resources Information Center
Gimenez, Jesus Tejada; Saenz de Jubera, Magdalena
This study, by means of an experimental design, examines whether the use of an electronic manual is more effective and efficient than a print manual for the training of novice users with a music score editor program. Differences in access to the two types of manuals were looked for, and information on users' perceptions regarding the materials…
Manual physical therapy: we speak gibberish.
Flynn, Timothy W; Childs, John D; Bell, Stephania; Magel, Jake S; Rowe, Robert H; Plock, Haideh
2008-03-01
In December of 2006, the American Academy of Orthopaedic Manual Physical Therapists (AAOMPT) convened a task force to create a framework for standardizing manual physical therapy procedures. The impetus came from many years of frustration with our ability to precisely communicate to each other, as well as to stakeholders outside our profession. To this end, a contribution titled "A Model for Standardizing Manipulation Terminology In Physical Therapy Practice" is published in this issue of the Journal.
Identification of Decisive Terrain: Useful Concept or Historical Label?
1993-05-14
The next area is a review of how decisive terrain is expressed in United States Army publications. The publications include Army field manuals : FM...either opposing force, covers primary avenues of approach, and whose loss 2 would mean destruction to the defender. In 1982, in Field Manual 100-5...reference how to identify it. There are no field manuals , field circulars, or training circulars that offer procedures or techniques in how to identify or
Navy Activity-Level Energy Systems Planning Procedure (A-LESP) Users Manual.
1986-01-01
1-in. stucco, air space 1.95 0.512 0.5-in. gypsum or plasterboard 0.56 1.78 Insulating drapes 1.72 0.58 ROOFS 2-in. insulation, 1-in. wood, air space...3 Annual Dry Bulb Degree Hours Above 780 F ............................ 267 -’ Table SDI Energy Conversion Units...A-LESP SURVEY DATE 5/83 Langleys 400 OPT. FEASIBILITY (YES/NO) Yes Dry bulb degree hours greater NES 180 MBtu/yr than 780 F 10,000 SIR 1.81_ Cooling
Keypunching Manual. Third Edition.
ERIC Educational Resources Information Center
Oldsen, Carl F.; Spagnuolo, Lenore
Presented in the manual are keypunching procedures with associated representative forms and keypunching cards for bibliographies and five basic types of abstracts which are used with the Control Data 3600 computer by the Michigan State University Materials Center for Handicapped Children and Youth (IMC HCY). Emphasis is given to keypunching all…
Oregon School Bond Manual. Fifth Edition.
ERIC Educational Resources Information Center
Oregon State Dept. of Education, Salem.
To help school districts comply with Oregon's school bond laws, this manual provides guidelines for school district attorneys and personnel in the issuance and sale of school bonds. The document describes the proper time sequence of the bonding procedure, including elections, school board authorizations, necessary certificates, bond registration…
Clinical Guidelines. Dental Hygiene Program.
ERIC Educational Resources Information Center
Branson, Bonnie
This manual contains information concerning the policies and procedures of the Southern Illinois University-Carbondale Dental Hygiene Clinic. The manual is presented in a question/answer format for the information and convenience of dental hygiene students in the program, and is intended to answer their questions concerning clinical policies and…
49 CFR 195.402 - Procedural manual for operations, maintenance, and emergencies.
Code of Federal Regulations, 2013 CFR
2013-10-01
... effective. This manual shall be prepared before initial operations of a pipeline system commence, and... in a timely and effective manner. (3) Operating, maintaining, and repairing the pipeline system in... public officials to learn the responsibility and resources of each government organization that may...
Operations and Maintenance Manual, Atmospheric Contaminant Sensor, Revision B.
ERIC Educational Resources Information Center
National Aeronautics and Space Administration, Washington, DC.
The sensor is a mass spectrometer system which continuously monitors the atmospheric constituents of hydrogen, water vapor, nitrogen, oxygen, and carbon dioxide, and monitors the Freons on a demand sampling basis. The manual provides a system description, operational procedures, and maintenance and troubleshooting instructions. Circuit diagrams…
ERIC Educational Resources Information Center
New York State Education Dept., Albany. Bureau of Elementary and Secondary Testing Programs.
This manual contains the general information on Regents Examinations, Regents Competency tests, occupational education proficiency examinations, and second language proficiency examinations, as well as the regulations and procedures for ordering, administering, and rating these examinations. The Regents Examinations are achievement tests based on…
Monograph Acquisitions Unit Staff Manual.
ERIC Educational Resources Information Center
Johnson, Steve; And Others
This staff manual provides a thorough description of the functions, procedures, and files of the monograph acquisitions department at South Carolina's Clemson University Library. It is noted that the department is responsible for both firm order and standing order purchases. Following introductory material, the principal processes of searching,…
Discretionary Grants Administration Manual.
ERIC Educational Resources Information Center
Office of Human Development Services (DHHS), Washington, DC.
This manual sets forth applicable administrative policies and procedures to recipients of discretionary project grants or cooperative agreements awarded by program offices in the Office of Human Development Services (HDS). It is intended to serve as a basic reference for project directors and business officers of recipient organizations who are…
34 CFR 300.304 - Evaluation procedures.
Code of Federal Regulations, 2014 CFR
2014-07-01
... of communication and in the form most likely to yield accurate information on what the child knows..., manual, or speaking skills, the assessment results accurately reflect the child's aptitude or achievement... impaired sensory, manual, or speaking skills (unless those skills are the factors that the test purports to...
34 CFR 300.304 - Evaluation procedures.
Code of Federal Regulations, 2012 CFR
2012-07-01
... or other mode of communication and in the form most likely to yield accurate information on what the... with impaired sensory, manual, or speaking skills, the assessment results accurately reflect the child... reflecting the child's impaired sensory, manual, or speaking skills (unless those skills are the factors that...
34 CFR 300.304 - Evaluation procedures.
Code of Federal Regulations, 2013 CFR
2013-07-01
... or other mode of communication and in the form most likely to yield accurate information on what the... with impaired sensory, manual, or speaking skills, the assessment results accurately reflect the child... reflecting the child's impaired sensory, manual, or speaking skills (unless those skills are the factors that...
Custodial Methods and Procedures Manual. Third Edition.
ERIC Educational Resources Information Center
Johnson, Donald R.
This manual discusses school facility cleaning and maintenance from the expanded perspective of work management, physical assets management, and resource management. Work management encompasses the organization of work and personnel, scheduling of daily or routine duties and tasks, and handling of demand work. Physical asset management includes…
Water Quality & Pollutant Source Monitoring: Field and Laboratory Procedures. Training Manual.
ERIC Educational Resources Information Center
Office of Water Program Operations (EPA), Cincinnati, OH. National Training and Operational Technology Center.
This training manual presents material on techniques and instrumentation used to develop data in field monitoring programs and related laboratory operations concerned with water quality and pollution monitoring. Topics include: collection and handling of samples; bacteriological, biological, and chemical field and laboratory methods; field…
Library Binding Manual. Revised Edition.
ERIC Educational Resources Information Center
Lakhanpal, S. K.
This procedural manual is designed to be used in bindery sections in public, university and special libraries. It briefly discusses these general matters: administrative control; selection of a binder; when and what to bind; conventional binding; routines; missing issues; schedule for shipments; temporary binding; rare books, maps and newspapers;…
2011-01-01
Background Reprocessing of endoscopes generally requires labour-intensive manual cleaning followed by high-level disinfection in an automated endoscope reprocessor (AER). EVOTECH Endoscope Cleaner and Reprocessor (ECR) is approved for fully automated cleaning and disinfection whereas AERs require manual cleaning prior to the high-level disinfection procedure. The purpose of this economic evaluation was to determine the cost-efficiency of the ECR versus AER methods of endoscopy reprocessing in an actual practice setting. Methods A time and motion study was conducted at a Canadian hospital to collect data on the personnel resources and consumable supplies costs associated with the use of EVOTECH ECR versus manual cleaning followed by AER with Medivators DSD-201. Reprocessing of all endoscopes was observed and timed for both reprocessor types over three days. Laboratory staff members were interviewed regarding the consumption and cost of all disposable supplies and equipment. Exact Wilcoxon rank sum test was used for assessing differences in total cycle reprocessing time. Results Endoscope reprocessing was significantly shorter with the ECR than with manual cleaning followed by AER. The differences in median time were 12.46 minutes per colonoscope (p < 0.0001), 6.31 minutes per gastroscope (p < 0.0001), and 5.66 minutes per bronchoscope (p = 0.0040). Almost 2 hours of direct labour time was saved daily with the ECR. The total per cycle cost of consumables and labour for maintenance was slightly higher for EVOTECH ECR versus manual cleaning followed by AER ($8.91 versus $8.31, respectively). Including the cost of direct labour time consumed in reprocessing scopes, the per cycle and annual costs of using the EVOTECH ECR was less than the cost of manual cleaning followed by AER disinfection ($11.50 versus $11.88). Conclusions The EVOTECH ECR was more efficient and less costly to use for the reprocessing of endoscopes than manual cleaning followed by AER disinfection. Although the cost of consumable supplies required to reprocess endoscopes with EVOTECH ECR was slightly higher, the value of the labour time saved with EVOTECH ECR more than offset the additional consumables cost. The increased efficiency with EVOTECH ECR could lead to even further cost-savings by shifting endoscopy laboratory personnel responsibilities but further study is required. PMID:21967345
Forte, Lindy; Shum, Cynthia
2011-10-03
Reprocessing of endoscopes generally requires labour-intensive manual cleaning followed by high-level disinfection in an automated endoscope reprocessor (AER). EVOTECH Endoscope Cleaner and Reprocessor (ECR) is approved for fully automated cleaning and disinfection whereas AERs require manual cleaning prior to the high-level disinfection procedure. The purpose of this economic evaluation was to determine the cost-efficiency of the ECR versus AER methods of endoscopy reprocessing in an actual practice setting. A time and motion study was conducted at a Canadian hospital to collect data on the personnel resources and consumable supplies costs associated with the use of EVOTECH ECR versus manual cleaning followed by AER with Medivators DSD-201. Reprocessing of all endoscopes was observed and timed for both reprocessor types over three days. Laboratory staff members were interviewed regarding the consumption and cost of all disposable supplies and equipment. Exact Wilcoxon rank sum test was used for assessing differences in total cycle reprocessing time. Endoscope reprocessing was significantly shorter with the ECR than with manual cleaning followed by AER. The differences in median time were 12.46 minutes per colonoscope (p < 0.0001), 6.31 minutes per gastroscope (p < 0.0001), and 5.66 minutes per bronchoscope (p = 0.0040). Almost 2 hours of direct labour time was saved daily with the ECR. The total per cycle cost of consumables and labour for maintenance was slightly higher for EVOTECH ECR versus manual cleaning followed by AER ($8.91 versus $8.31, respectively). Including the cost of direct labour time consumed in reprocessing scopes, the per cycle and annual costs of using the EVOTECH ECR was less than the cost of manual cleaning followed by AER disinfection ($11.50 versus $11.88). The EVOTECH ECR was more efficient and less costly to use for the reprocessing of endoscopes than manual cleaning followed by AER disinfection. Although the cost of consumable supplies required to reprocess endoscopes with EVOTECH ECR was slightly higher, the value of the labour time saved with EVOTECH ECR more than offset the additional consumables cost. The increased efficiency with EVOTECH ECR could lead to even further cost-savings by shifting endoscopy laboratory personnel responsibilities but further study is required.
Dow, Rustam; Barnsley, Jan; Tu, Karen; Domb, Sharon; Jadad, Alejandro R.; Lemieux-Charles, Louise
2015-01-01
Research problem Tutorials and user manuals are important forms of impersonal support for using software applications including electronic medical records (EMRs). Differences between user- and vendor documentation may indicate support needs, which are not sufficiently addressed by the official documentation, and reveal new elements that may inform the design of tutorials and user manuals. Research question What are the differences between user-generated tutorials and manuals for an EMR and the official user manual from the software vendor? Literature review Effective design of tutorials and user manuals requires careful packaging of information, balance between declarative and procedural texts, an action and task-oriented approach, support for error recognition and recovery, and effective use of visual elements. No previous research compared these elements between formal and informal documents. Methodology We conducted an mixed methods study. Seven tutorials and two manuals for an EMR were collected from three family health teams and compared with the official user manual from the software vendor. Documents were qualitatively analyzed using a framework analysis approach in relation to the principles of technical documentation described above. Subsets of the data were quantitatively analyzed using cross-tabulation to compare the types of error information and visual cues in screen captures between user- and vendor-generated manuals. Results and discussion The user-developed tutorials and manuals differed from the vendor-developed manual in that they contained mostly procedural and not declarative information; were customized to the specific workflow, user roles, and patient characteristics; contained more error information related to work processes than to software usage; and used explicit visual cues on screen captures to help users identify window elements. These findings imply that to support EMR implementation, tutorials and manuals need to be customized and adapted to specific organizational contexts and workflows. The main limitation of the study is its generalizability. Future research should address this limitation and may explore alternative approaches to software documentation, such as modular manuals or participatory design. PMID:26190888
Monitoring rationale, strategy, issues, and methods: UMRR-EMP LTRMP fish component
Ickes, Brian S.; Sauer, Jennifer S.; Rogala, James T.
2014-01-01
The Long Term Resource Monitoring Program (LTRMP), an element of the multiagency partnership Upper Mississippi River Restoration-Environmental Management Program, has been monitoring fishes in the Upper Mississippi River System (UMRS) for over two decades, using scientific and highly standardized methods. Today, the LTRMP’s data assets represent one of the world’s largest and most extensive datasets on a great river. Methods and procedures used over the past two decades have been documented and have proven a key tool towards gaining data that are (a) scientifically valid, (b) comparable over time, and (c) comparable over space. These procedures manuals coordinate and standardize methods, procedures, and field behaviors in the execution of long-term monitoring, permitting the informed management and control of important sources of error actually under program control. As LTRMP databases have matured in scope and accumulated more years' worth of data, their utility in research and management in the UMRS basin has increased notably. To maximize their utility, data users need not only be aware of “how the data were collected,” as portrayed in the procedures manuals, but also “why the data were collected in the way they were, at the scales they were, and in the manner that they were.” Whereas the procedures manuals contribute information as to the “how” the data were gained, this document seeks to contribute information as to the “why.” As such, this document is intended to be a companion document to the procedures manuals. Herein, we present information on the rationale for monitoring nearly one-fifth of the entire North American freshwater fish fauna (representing the greatest freshwater fish diversity on the planet at temperate latitudes); strategies employed and their reasoning; and discussions on issues associated with the sampling design itself, data arising therefrom, and uses of those data in different contexts.
40 CFR 265.92 - Sampling and analysis.
Code of Federal Regulations, 2013 CFR
2013-07-01
...) Analytical procedures; and (4) Chain of custody control. [Comment: See “Procedures Manual For Ground-water... characterizing the suitability of the ground water as a drinking water supply, as specified in appendix III. (2...
40 CFR 265.92 - Sampling and analysis.
Code of Federal Regulations, 2014 CFR
2014-07-01
...) Analytical procedures; and (4) Chain of custody control. [Comment: See “Procedures Manual For Ground-water... characterizing the suitability of the ground water as a drinking water supply, as specified in appendix III. (2...
40 CFR 265.92 - Sampling and analysis.
Code of Federal Regulations, 2012 CFR
2012-07-01
...) Analytical procedures; and (4) Chain of custody control. [Comment: See “Procedures Manual For Ground-water... characterizing the suitability of the ground water as a drinking water supply, as specified in appendix III. (2...
Barabasz, Arreed F; Barabasz, Marianne; Watkins, John G
2012-01-01
An abbreviated description of our single-session 5- to 6-hour procedure is provided. In contrast to trauma reframing approaches, such as cognitive processing therapy (CPT) or traditional psychoanalytic interventions, our manualized procedure rapidly demystifies subconscious processes, making them accessible and understandable by the patient. The therapist's supportive ego strength is integrated into the intense repeated emotional and physiological releases of the traumatized ego states. The abreactive component of this 5-phase procedure exhausts the bound-up psychological and physiological reactions but also serves to quickly overcome the trauma and to restructure the personality. The patient becomes empowered to release the trauma memories and to emerge with the ability to be adaptive, assertive, giving, strong, and able to express anger appropriately yet be caring with family/friends.
Skylab Saturn 1B flight manual
NASA Technical Reports Server (NTRS)
1972-01-01
A Saturn 1B Flight Manual provides launch vehicle systems descriptions and predicted performance data for the Skylab missions. Vehicle SL-2 (SA-206) is the baseline for this manual; but, as a result of the great similarity, the material is representative of SL-3 and SL-4 launch vehicles, also. The Flight Manual is not a control document but is intended primarily as an aid to astronauts who are training for Skylab missions. In order to provide a comprehensive reference for that purpose, the manual also contains descriptions of the ground support interfaces, prelaunch operations, and emergency procedures. Mission variables and constraints are summarized, and mission control monitoring and data flow during launch preparation and flight are discussed.
Park, Myoung-Ok
2017-02-01
[Purpose] The purpose of this study was to determine effects of Gross Motor Function Classification System and Manual Ability Classification System levels on performance-based motor skills of children with spastic cerebral palsy. [Subjects and Methods] Twenty-three children with cerebral palsy were included. The Assessment of Motor and Process Skills was used to evaluate performance-based motor skills in daily life. Gross motor function was assessed using Gross Motor Function Classification Systems, and manual function was measured using the Manual Ability Classification System. [Results] Motor skills in daily activities were significantly different on Gross Motor Function Classification System level and Manual Ability Classification System level. According to the results of multiple regression analysis, children categorized as Gross Motor Function Classification System level III scored lower in terms of performance based motor skills than Gross Motor Function Classification System level I children. Also, when analyzed with respect to Manual Ability Classification System level, level II was lower than level I, and level III was lower than level II in terms of performance based motor skills. [Conclusion] The results of this study indicate that performance-based motor skills differ among children categorized based on Gross Motor Function Classification System and Manual Ability Classification System levels of cerebral palsy.
Us in a Bus: A Transportation Manual for Head Start Programs.
ERIC Educational Resources Information Center
Education Development Center, Inc., Newton, MA.
The purpose of this manual is to provide Head Start directors, transportation supervisors, and trainers with information and activities that will help develop, enhance, and maintain a safe and efficient transportation system for their programs. Contents are organized into three categories: safety procedures, planning a transportation system, and…
14 CFR 33.5 - Instruction manual for installing and operating the engine.
Code of Federal Regulations, 2013 CFR
2013-01-01
... devices, maintenance checks, and similar equipment or procedures that are outside the control of the... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES General § 33.5 Instruction manual for... attaching the engine to the aircraft, and the maximum allowable load for the mounting attachments and...
14 CFR 33.5 - Instruction manual for installing and operating the engine.
Code of Federal Regulations, 2014 CFR
2014-01-01
... devices, maintenance checks, and similar equipment or procedures that are outside the control of the... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES General § 33.5 Instruction manual for... attaching the engine to the aircraft, and the maximum allowable load for the mounting attachments and...
14 CFR 33.5 - Instruction manual for installing and operating the engine.
Code of Federal Regulations, 2011 CFR
2011-01-01
... devices, maintenance checks, and similar equipment or procedures that are outside the control of the... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES General § 33.5 Instruction manual for... attaching the engine to the aircraft, and the maximum allowable load for the mounting attachments and...
14 CFR 33.5 - Instruction manual for installing and operating the engine.
Code of Federal Regulations, 2012 CFR
2012-01-01
... devices, maintenance checks, and similar equipment or procedures that are outside the control of the... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES General § 33.5 Instruction manual for... attaching the engine to the aircraft, and the maximum allowable load for the mounting attachments and...
14 CFR 33.5 - Instruction manual for installing and operating the engine.
Code of Federal Regulations, 2010 CFR
2010-01-01
... devices, maintenance checks, and similar equipment or procedures that are outside the control of the... TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES General § 33.5 Instruction manual for... attaching the engine to the aircraft, and the maximum allowable load for the mounting attachments and...
Project Developmental Continuity: Field Procedures Manual.
ERIC Educational Resources Information Center
Morris, Mary
This operations manual for field staff (site monitors, site coordinators, and testers) involved in the observation and testing of children is part of a series of documents on the evaluation of Project Developmental Continuity (PDC), a Head Start demonstration program aimed at providing educational and developmental continuity between children's…
14 CFR 171.305 - Requests for IFR procedure.
Code of Federal Regulations, 2010 CFR
2010-01-01
... maintenance manual that meets the requirements of § 171.325. (4) A statement of intent to meet the... reliability and an acceptable standard of performance. Previous equivalent operational experience with a... results, and of any required changes in the MLS facility or in the maintenance manual or maintenance...
14 CFR 171.43 - Requests for IFR procedure.
Code of Federal Regulations, 2010 CFR
2010-01-01
... organization and a maintenance manual that meets the requirements of § 171.51. (4) A statement of intent to... operational reliability and an acceptable standard of performance. Previous equivalent operational experience... owner of the results and of any required changes in the facility or the maintenance manual or...
Illinois Community College Board Uniform Accounting Procedures Manual.
ERIC Educational Resources Information Center
Illinois Community Coll. Board, Springfield.
This manual was designed to provide chief finance officers and other administrators with a summary of laws and policies that relate to Illinois public community colleges and to provide a uniform system for accounting, budgeting, auditing, and reporting in the state's community colleges. After chapter I describes the fiscal philosophies and…
International Labour Standards. A Workers' Education Manual.
ERIC Educational Resources Information Center
International Labour Office, Geneva (Switzerland).
Concerned with the standard-setting work of the International Labor Organization (ILO), this manual is chiefly intended to provide guidance for worker's education instructors and trade union officials. It contains nine chapters: (1) the ILO origins and history are traced and the structure is explained; (2 & 3) procedures for the origination…
Federal Register 2010, 2011, 2012, 2013, 2014
2011-09-16
... companion manual to provide agency-wide guidance for executing compliance with Executive Order 11988... procedures and guidance in accordance with specific sections of Executive Order 11988 and Executive Order.... ADDRESSES: Written comments should be sent to Emily Johannes, Senior Environmental Technical Advisor, NOAA...
76 FR 69869 - Energy Conservation Program: Test Procedures for Residential Clothes Washers
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-09
... manual water fill control system, user- adjustable adaptive water fill control system, or adaptive water fill control system with alternate manual water fill control system, use the water fill selector... and transcripts, comments, and other supporting documents/ materials. All documents in the docket are...
ERIC Educational Resources Information Center
Ontario Ministry of the Environment, Toronto.
Outlined are practices and procedures that should be followed in order to protect and fully realize the benefits of sewer systems and also to maximize service and minimize inconveniences to the public. Written in practical terms, the manual is designed to be of immediate use to municipal employees and others involved in sewer maintenance…
New Mexico Statewide Assessment Program (NMSAP) Procedures Manual, 2007-2008
ERIC Educational Resources Information Center
New Mexico Public Education Department, 2007
2007-01-01
This manual has been prepared for all New Mexico Statewide Assessment Program (NMSAP) assessment administrators, teachers, school specialists, and principals. It includes information about the following topics: PED contacts, New Mexico Standards Based Assessments (SBA), Grades 3-8 and 11; New Mexico High School Competency Examination (NMHSCE);…
Staff Association Handbook, 1974-75.
ERIC Educational Resources Information Center
Montgomery Coll. Staff Association, Takoma Park, MD.
This handbook provides a list of Staff Senate and Committee members of the Staff Association of Montgomery College, a copy of the bylaws of the association, and sections of the college's "Policies and Procedures Manual" that affect staff employees. These sections of the manual pertain to: Administrative and Staff Communication;…
Methods for the Determination of Chemical Contaminants in Drinking Water. Training Manual.
ERIC Educational Resources Information Center
Office of Water Program Operations (EPA), Cincinnati, OH. National Training and Operational Technology Center.
This training manual, intended for chemists and technicians with little or no experience in chemical procedures required to monitor drinking water, covers analytical methods for inorganic and organic chemical contaminants listed in the interim primary drinking water regulations. Topics include methods for heavy metals, nitrate, and organic…
A Token Manual for Behavior Analysis Classrooms.
ERIC Educational Resources Information Center
Bushell, Don, Jr.
This dual language manual, written in both Spanish and English, will help the teacher in a Behavior Analysis classroom utilize the Token System to motivate, reinforce, and foster independence in pupils' learning activities. The rationale and procedures for earning, giving, and exchanging tokens is clearly explained. The use of helpful accessories…
DOT National Transportation Integrated Search
1991-01-01
This manual was undertaken to record for all persons wishing to do concrete petrography the petrographic procedures that have been found useful here at the Virginia Transportation Research Council. This interim report is made up of the introduction, ...
Code of Federal Regulations, 2010 CFR
2010-01-01
... Conformity, FAA Form 8130-9, for each new product that has not been manufactured under a production... certificated empty weight. (3) A maintenance manual for each new product when such a manual is required by the... PROCEDURES FOR PRODUCTS AND PARTS Export Airworthiness Approvals § 21.327 Application. (a) Except as provided...
This manual describes procedures for collecting samples and field measurements for biotic assemblages and abiotic characteristics of the Great Rivers of the Central Basin of the United States: the Missouri, Upper Mississippi, and Ohio Rivers. In addition to the technical and logi...
Opticalman 3 and 2, Rate Training Manual.
ERIC Educational Resources Information Center
Naval Personnel Program Support Activity, Washington, DC.
Theories and practical skills for use in optical shops are presented in this rate training manual, prepared for regular navy and naval reserve personnel. Light theories are analyzed in connection with mirrors, prisms, lenses, and basic optical systems. Following fundamentals of mechanical design and construction, maintenance procedures are studied…