Facilitating Behavior Change With Low-literacy Patient Education Materials

PubMed Central

Seligman, Hilary K.; Wallace, Andrea S.; DeWalt, Darren A.; Schillinger, Dean; Arnold, Connie L.; Shilliday, Betsy Bryant; Delgadillo, Adriana; Bengal, Nikki; Davis, Terry C.

2014-01-01

Objective To describe a process for developing low-literacy health education materials that increase knowledge and activate patients toward healthier behaviors. Methods We developed a theoretically informed process for developing educational materials. This process included convening a multidisciplinary creative team, soliciting stakeholder input, identifying key concepts to be communicated, mapping concepts to a behavioral theory, creating a supporting behavioral intervention, designing and refining materials, and assessing efficacy. Results We describe the use of this process to develop a diabetes self-management guide. Conclusions Developing low-literacy health education materials that will activate patients toward healthier behaviors requires attention to factors beyond reading level. PMID:17931139

Basic Concepts of CNS Development.

ERIC Educational Resources Information Center

Nowakowski, R. S.

1987-01-01

The goals of this review are to: (1) provide a set of concepts to aid in the understanding of complex processes which occur during central nervous system (CNS) development; (2) illustrate how they contribute to our knowlege of adult brain anatomy; and (3) delineate how modifications of normal developmental processes may affect the structure and…

Quiet Clean Short-Haul Experimental Engine (QCSEE) Under-The-Wing (UTW) graphite/PMR cowl development

NASA Technical Reports Server (NTRS)

Ruggles, C. L.

1978-01-01

The PMR process development, tooling concepts, testing conducted to generate materials properties data, and the fabrication of a subscale model of the inner cowl are presented. It was concluded that the materials, processes, and tooling concepts were satisfactory for making an inner cowl with adequate structural integrity.

Developing the Concept of a Parabola in Taxicab Geometry

ERIC Educational Resources Information Center

Ada, Tuba; Kurtulus, Aytaç; Yanik, H. Bahadir

2015-01-01

The aim of this study was to observe the development process of the concept of a parabola in Taxicab geometry. The study was carried out in two stages. First, some activities related to Euclidean geometry and Taxicab geometry were designed based on concept development and real-life applications, and they were administered to a ninth-grade student.…

Conceptual design and evaluation of selected Space Station concepts, volume 1

NASA Technical Reports Server (NTRS)

1983-01-01

Space Station configuration concepts are defined to meet the NASA Headquarters Concept Development Group (CDG) requirements. Engineering and programmatic data are produced on these concepts suitable for NASA and industry dissemination. A data base is developed for input to the CDG's evaluation of generic Space Station configurations and for use in the critique of the CDG's generic configuration evaluation process.

NTP comparison process

NASA Technical Reports Server (NTRS)

Corban, Robert

1993-01-01

The systems engineering process for the concept definition phase of the program involves requirements definition, system definition, and consistent concept definition. The requirements definition process involves obtaining a complete understanding of the system requirements based on customer needs, mission scenarios, and nuclear thermal propulsion (NTP) operating characteristics. A system functional analysis is performed to provide a comprehensive traceability and verification of top-level requirements down to detailed system specifications and provides significant insight into the measures of system effectiveness to be utilized in system evaluation. The second key element in the process is the definition of system concepts to meet the requirements. This part of the process involves engine system and reactor contractor teams to develop alternative NTP system concepts that can be evaluated against specific attributes, as well as a reference configuration against which to compare system benefits and merits. Quality function deployment (QFD), as an excellent tool within Total Quality Management (TQM) techniques, can provide the required structure and provide a link to the voice of the customer in establishing critical system qualities and their relationships. The third element of the process is the consistent performance comparison. The comparison process involves validating developed concept data and quantifying system merits through analysis, computer modeling, simulation, and rapid prototyping of the proposed high risk NTP subsystems. The maximum amount possible of quantitative data will be developed and/or validated to be utilized in the QFD evaluation matrix. If upon evaluation of a new concept or its associated subsystems determine to have substantial merit, those features will be incorporated into the reference configuration for subsequent system definition and comparison efforts.

Natural Language Processing Methods and Systems for Biomedical Ontology Learning

PubMed Central

Liu, Kaihong; Hogan, William R.; Crowley, Rebecca S.

2010-01-01

While the biomedical informatics community widely acknowledges the utility of domain ontologies, there remain many barriers to their effective use. One important requirement of domain ontologies is that they must achieve a high degree of coverage of the domain concepts and concept relationships. However, the development of these ontologies is typically a manual, time-consuming, and often error-prone process. Limited resources result in missing concepts and relationships as well as difficulty in updating the ontology as knowledge changes. Methodologies developed in the fields of natural language processing, information extraction, information retrieval and machine learning provide techniques for automating the enrichment of an ontology from free-text documents. In this article, we review existing methodologies and developed systems, and discuss how existing methods can benefit the development of biomedical ontologies. PMID:20647054

Doctrine Development Process in the Kenya Army: Bridging the Gap

DTIC Science & Technology

2014-06-13

concepts, and principles . It must broadly follow three doctrine development phases: the collection/information gathering phase; the formulation and...a capable lead organization. The organization must eliminate terminological and utility confusion among doctrine, concepts, and principles . It must...15 The relationship Between Military Doctrine, Concept and Principle

The MSFC Collaborative Engineering Process for Preliminary Design and Concept Definition Studies

NASA Technical Reports Server (NTRS)

Mulqueen, Jack; Jones, David; Hopkins, Randy

2011-01-01

This paper describes a collaborative engineering process developed by the Marshall Space Flight Center's Advanced Concepts Office for performing rapid preliminary design and mission concept definition studies for potential future NASA missions. The process has been developed and demonstrated for a broad range of mission studies including human space exploration missions, space transportation system studies and in-space science missions. The paper will describe the design team structure and specialized analytical tools that have been developed to enable a unique rapid design process. The collaborative engineering process consists of integrated analysis approach for mission definition, vehicle definition and system engineering. The relevance of the collaborative process elements to the standard NASA NPR 7120.1 system engineering process will be demonstrated. The study definition process flow for each study discipline will be will be outlined beginning with the study planning process, followed by definition of ground rules and assumptions, definition of study trades, mission analysis and subsystem analyses leading to a standardized set of mission concept study products. The flexibility of the collaborative engineering design process to accommodate a wide range of study objectives from technology definition and requirements definition to preliminary design studies will be addressed. The paper will also describe the applicability of the collaborative engineering process to include an integrated systems analysis approach for evaluating the functional requirements of evolving system technologies and capabilities needed to meet the needs of future NASA programs.

Identification of Threshold Concepts for Biochemistry

PubMed Central

Green, David; Lewis, Jennifer E.; Lin, Sara; Minderhout, Vicky

2014-01-01

Threshold concepts (TCs) are concepts that, when mastered, represent a transformed understanding of a discipline without which the learner cannot progress. We have undertaken a process involving more than 75 faculty members and 50 undergraduate students to identify a working list of TCs for biochemistry. The process of identifying TCs for biochemistry was modeled on extensive work related to TCs across a range of disciplines and included faculty workshops and student interviews. Using an iterative process, we prioritized five concepts on which to focus future development of instructional materials. Broadly defined, the concepts are steady state, biochemical pathway dynamics and regulation, the physical basis of interactions, thermodynamics of macromolecular structure formation, and free energy. The working list presented here is not intended to be exhaustive, but rather is meant to identify a subset of TCs for biochemistry for which instructional and assessment tools for undergraduate biochemistry will be developed. PMID:25185234

A modular framework for biomedical concept recognition

PubMed Central

2013-01-01

Background Concept recognition is an essential task in biomedical information extraction, presenting several complex and unsolved challenges. The development of such solutions is typically performed in an ad-hoc manner or using general information extraction frameworks, which are not optimized for the biomedical domain and normally require the integration of complex external libraries and/or the development of custom tools. Results This article presents Neji, an open source framework optimized for biomedical concept recognition built around four key characteristics: modularity, scalability, speed, and usability. It integrates modules for biomedical natural language processing, such as sentence splitting, tokenization, lemmatization, part-of-speech tagging, chunking and dependency parsing. Concept recognition is provided through dictionary matching and machine learning with normalization methods. Neji also integrates an innovative concept tree implementation, supporting overlapped concept names and respective disambiguation techniques. The most popular input and output formats, namely Pubmed XML, IeXML, CoNLL and A1, are also supported. On top of the built-in functionalities, developers and researchers can implement new processing modules or pipelines, or use the provided command-line interface tool to build their own solutions, applying the most appropriate techniques to identify heterogeneous biomedical concepts. Neji was evaluated against three gold standard corpora with heterogeneous biomedical concepts (CRAFT, AnEM and NCBI disease corpus), achieving high performance results on named entity recognition (F1-measure for overlap matching: species 95%, cell 92%, cellular components 83%, gene and proteins 76%, chemicals 65%, biological processes and molecular functions 63%, disorders 85%, and anatomical entities 82%) and on entity normalization (F1-measure for overlap name matching and correct identifier included in the returned list of identifiers: species 88%, cell 71%, cellular components 72%, gene and proteins 64%, chemicals 53%, and biological processes and molecular functions 40%). Neji provides fast and multi-threaded data processing, annotating up to 1200 sentences/second when using dictionary-based concept identification. Conclusions Considering the provided features and underlying characteristics, we believe that Neji is an important contribution to the biomedical community, streamlining the development of complex concept recognition solutions. Neji is freely available at http://bioinformatics.ua.pt/neji. PMID:24063607

The influence of different screw concepts while processing fibre reinforced thermoplastics with the concept of inline-compounding on an injection moulding machine

NASA Astrophysics Data System (ADS)

Moritzer, E.; Müller, E.; Kleeschulte, R.

2014-05-01

Today, the global market poses major challenges for industrial product development. Complexity, the wide range of variants, flexibility and individuality are just some of the features that products have to fulfil. Product series additionally have shorter and shorter lifetimes. Because of their high capacity for adaptation, polymers are increasingly able to substitute traditional materials such as wood, glass and metals in various fields of application [1]. But polymers can only substitute other materials if they are optimally suited to the applications in question. Hence, product-specific material development is becoming increasingly important [2]. The problem is that the traditional development process for new polymer formulations is much too complex, too slow and therefore too expensive. Product-specific material development is thus out of the question for most processors. Integrating the compounding step in the injection moulding process would lead to a more efficient and faster development process for a new polymer formulation, providing an opportunity to create new product-specific materials. This process is called inline-compounding on an injection moulding machine. In order to develop this innovative formulation concept, with the focus on fibre reinforced thermoplastics, different screw-concepts are compared with regard to the resultant performance characteristics in the part, such as mechanical properties and fibre length distribution.

New Product Development (NPD) Process - An Example of Industrial Sector

NASA Astrophysics Data System (ADS)

Kazimierska, Marianna; Grębosz-Krawczyk, Magdalena

2017-12-01

This aim of this article is to present the process of new product introduction on example of industrial sector in context of new product development (NPD) concept. In the article, the concept of new product development is discussed and the different stages of the process of new electric motor development are analysed taking into account its objectives, implemented procedures, functions and responsibilities division. In the article, information from secondary sources and the results of empirical research - conducted in an international manufacturing company - are used. The research results show the significance of project leader and regular cooperation with final client in the NPD process.

Defense Science and Technology Strategy

DTIC Science & Technology

1994-09-01

I 3 IV. The Science and Technology Program .................... 15 Advanced Concept Technology Demomstrations...product and process concepts that pcrmit us to tailor, modify, and optimize the manufactUriiig process; develop sensors a-t i~a Mcrials that will detect...It can be used during concept formulations to expand the range of technical, operational, and system alternatives evaluated. The technology can

Space Mission Operations Concept

NASA Technical Reports Server (NTRS)

Squibb, Gael F.

1996-01-01

This paper will discuss the concept of developing a space mission operations concept; the benefits of starting this system engineering task early; the neccessary inputs to the process; and the products that are generated.

Concept for Highly Mechanized Data Processing, Project 111.

DTIC Science & Technology

A concept is developed for a highly mechanized maintenance data processing system capable of deriving factors, influences, and correlations to raise...the level of logistics knowledge and lead to the design of a management-control system. (Author)

Automation and integration of components for generalized semantic markup of electronic medical texts.

PubMed Central

Dugan, J. M.; Berrios, D. C.; Liu, X.; Kim, D. K.; Kaizer, H.; Fagan, L. M.

1999-01-01

Our group has built an information retrieval system based on a complex semantic markup of medical textbooks. We describe the construction of a set of web-based knowledge-acquisition tools that expedites the collection and maintenance of the concepts required for text markup and the search interface required for information retrieval from the marked text. In the text markup system, domain experts (DEs) identify sections of text that contain one or more elements from a finite set of concepts. End users can then query the text using a predefined set of questions, each of which identifies a subset of complementary concepts. The search process matches that subset of concepts to relevant points in the text. The current process requires that the DE invest significant time to generate the required concepts and questions. We propose a new system--called ACQUIRE (Acquisition of Concepts and Queries in an Integrated Retrieval Environment)--that assists a DE in two essential tasks in the text-markup process. First, it helps her to develop, edit, and maintain the concept model: the set of concepts with which she marks the text. Second, ACQUIRE helps her to develop a query model: the set of specific questions that end users can later use to search the marked text. The DE incorporates concepts from the concept model when she creates the questions in the query model. The major benefit of the ACQUIRE system is a reduction in the time and effort required for the text-markup process. We compared the process of concept- and query-model creation using ACQUIRE to the process used in previous work by rebuilding two existing models that we previously constructed manually. We observed a significant decrease in the time required to build and maintain the concept and query models. Images Figure 1 Figure 2 Figure 4 Figure 5 PMID:10566457

Concept Generation Process for Patient Transferring Device

NASA Astrophysics Data System (ADS)

Dandavate, A. L.; Sarje, S. H.

2012-07-01

In this paper, an attempt has been made to develop concepts for patient transferring tasks. The concept generation process of patient transferring device (PTD), which includes interviews of the customers, interpretation of the needs, organizing the needs into a hierarchy, establishing relative importance of the needs, establishing target specifications, and conceptualization has been discussed in this paper. The authors conducted the interviews of customers at Mobilink NGO, St. John's Hospital, Bangalore in order to know the needs and wants for the PTD. AHP technique was used for establishing and evaluating relative importance of needs, and based on the importance of the customer needs, concepts were developed through brainstorming.

Post-Correlation Processing for the VLBI2010 Proof-of-Concept System

NASA Technical Reports Server (NTRS)

Beaudoin, Christopher; Niell, Arthur

2010-01-01

For the past three years, the MIT Haystack Observatory and the broadband team have been developing a proof-of-concept broadband geodetic VLBI microwave (2-12 GHz) receiver. Also on-going at Haystack is the development of post-correlation processing needed to extract the geodetic observables. Using this processing, the first fully-phase-calibrated geodetic fringes have been produced from observations conducted with the proof-of-concept system. The results we present show that the phase-calibrated phase residuals from four 512 MHz bands spanning 2 GHz have an RMS phase variation of 8deg which corresponds to a delay uncertainty of 12 ps.

Advanced composites structural concepts and materials technologies for primary aircraft structures: Design/manufacturing concept assessment

NASA Technical Reports Server (NTRS)

Chu, Robert L.; Bayha, Tom D.; Davis, HU; Ingram, J. ED; Shukla, Jay G.

1992-01-01

Composite Wing and Fuselage Structural Design/Manufacturing Concepts have been developed and evaluated. Trade studies were performed to determine how well the concepts satisfy the program goals of 25 percent cost savings, 40 percent weight savings with aircraft resizing, and 50 percent part count reduction as compared to the aluminum Lockheed L-1011 baseline. The concepts developed using emerging technologies such as large scale resin transfer molding (RTM), automatic tow placed (ATP), braiding, out-of-autoclave and automated manufacturing processes for both thermoset and thermoplastic materials were evaluated for possible application in the design concepts. Trade studies were used to determine which concepts carry into the detailed design development subtask.

Development and Evaluation of Sensor Concepts for Ageless Aerospace Vehicles: Report 4 - Phase 1 Implementation of the Concept Demonstrator

NASA Technical Reports Server (NTRS)

Abbott, David; Batten, Adam; Carpenter, David; Dunlop, John; Edwards, Graeme; Farmer, Tony; Gaffney, Bruce; Hedley, Mark; Hoschke, Nigel; Isaacs, Peter;

Developing focused wellness programs: using concept analysis to increase business value.

PubMed

Byczek, Lance; Kalina, Christine M; Levin, Pamela F

2003-09-01

Concept analysis is a useful tool in providing clarity to an abstract idea as well as an objective basis for developing wellness program products, goals, and outcomes. To plan for and develop successful wellness programs, it is critical for occupational health nurses to clearly understand a program concept as applied to a particular community or population. Occupational health nurses can use the outcome measures resulting from the concept analysis process to help demonstrate the business value of their wellness programs. This concept analysis demonstrates a predominance of the performance related attributes of fitness in the scientific literature.

THE DEVELOPMENT OF A CONCEPT OF EMPATHY.

ERIC Educational Resources Information Center

STOHRER, JOHN F.

THIS PAPER DISCUSSES EMPATHY AS THE CONCEPT HAS DEVELOPED PHILOSOPHICALLY, AS IT IS USED IN THE ARTS, AND AS IT DIFFERS FROM SYMPATHY. EMPATHY IS DEFINED AS A TWO-DIRECTIONAL PROCESS INVOLVING THE OBSERVER AND THE OBSERVED. THE ETHICAL CONCEPT IS DEFINED AS AN EMOTIONAL "FEELING INTO," EXTENSION, OR INVESTMENT OF THE SELF ON THE PART OF…

Understanding healing: a conceptual analysis.

PubMed

Wendler, M C

1996-10-01

The practice of the healing arts has been a part of human history since ancient times. Despite the development of related scholarly concepts in nursing such as caring, healing remains an enigma. Using conceptual analysis a clear definition of healing within a Rogerian/Newmanian framework is explicated. Case development assists in the understanding of healing as a concept, and questions arising from this definition provide focus for further scholarly work. A result of this process of concept analysis was the development of a definition of healing which is clear and which fits the theoretical underpinnings of the unitary-transformative paradigm. Healing, as a core variable of interest in the study of health, provides important parameters for study. The definition of healing which arose from the concept analysis is: Healing is an experiential, energy-requiring process in which space is created through a caring relationship in a process of expanding consciousness and results in a sense of wholeness, integration, balance and transformation and which can never be fully known.

Application of NASA-developed technology to the automatic control of municipal sewage treatment plants

NASA Technical Reports Server (NTRS)

Hiser, L. L.; Herrera, W. R.

1973-01-01

A search was made of NASA developed technology and commercial technology for process control sensors and instrumentation which would be applicable to the operation of municipal sewage treatment plants. Several notable items were found from which process control concepts were formulated that incorporated these items into systems to automatically operate municipal sewage treatment plants. A preliminary design of the most promising concept was developed into a process control scheme for an activated sludge treatment plant. This design included process control mechanisms for maintaining constant food to sludge mass (F/M) ratio, and for such unit processes as primary sedimentation, sludge wastage, and underflow control from the final clarifier.

Intertextual learning strategy with guided inquiry on solubility equilibrium concept to improve the student’s scientific processing skills

NASA Astrophysics Data System (ADS)

Wardani, K. U.; Mulyani, S.; Wiji

2018-04-01

The aim of this study was to develop intertextual learning strategy with guided inquiry on solubility equilibrium concept to enhance student’s scientific processing skills. This study was conducted with consideration of some various studies which found that lack of student’s process skills in learning chemistry was caused by learning chemistry is just a concept. The method used in this study is a Research and Development to generate the intertextual learning strategy with guided inquiry. The instruments used in the form of sheets validation are used to determine the congruence of learning activities by step guided inquiry learning and scientific processing skills with aspects of learning activities. Validation results obtained that the learning activities conducted in line with aspects of indicators of the scientific processing skills.

The social life of cognition.

PubMed

Korman, Joanna; Voiklis, John; Malle, Bertram F

2015-02-01

We begin by illustrating that long before the cognitive revolution, social psychology focused on topics pertaining to what is now known as social cognition: people's subjective interpretations of social situations and the concepts and cognitive processes underlying these interpretations. We then examine two questions: whether social cognition entails characteristic concepts and cognitive processes, and how social processes might themselves shape and constrain cognition. We suggest that social cognition relies heavily on generic cognition but also on unique concepts (e.g., agent, intentionality) and unique processes (e.g., projection, imitation, joint attention). We further suggest that social processes play a prominent role in the development and unfolding of several generic cognitive processes, including learning, attention, and memory. Finally, we comment on the prospects of a recently developing approach to the study of social cognition (social neuroscience) and two potential future directions (computational social cognition and social-cognitive robotics). Copyright © 2014 Elsevier B.V. All rights reserved.

The Development of Science Concept in Turkey and Effects of Constructivism on 2004 Primary Science Curriculum

ERIC Educational Resources Information Center

Öztürk, Faruk

2016-01-01

The aim of this study is to examine the development of science concept in Turkey. It is seen that the historical process of science concept in Turkey has developed within two stages. The first setting is the later stages of the Ottoman State and the Republican Era, at which time positivism was prevalent as noted in the objectives of the national…

Development of a Curriculum Management Process by Applying Lean Concept for Waste Elimination to Enhance Curriculum Implementation of Primary School Teacher

ERIC Educational Resources Information Center

Chitrangsan, Nadrudee; Sawekngam, Wichai; Thongthew, Sumlee

2015-01-01

This research aims to study and develop a curriculum management process by applying Lean concept for waste elimination to enhance curriculum implementation of primary school teacher. This study was conducted with a focus on qualitative data collection by dividing into 2 phases, including (1) analyze and synthesize relevant notions, theories,…

The Learning Reconstruction of Particle System and Linear Momentum Conservation in Introductory Physics Course

NASA Astrophysics Data System (ADS)

Karim, S.; Saepuzaman, D.; Sriyansyah, S. P.

2016-08-01

This study is initiated by low achievement of prospective teachers in understanding concepts in introductory physics course. In this case, a problem has been identified that students cannot develop their thinking skills required for building physics concepts. Therefore, this study will reconstruct a learning process, emphasizing a physics concept building. The outcome will design physics lesson plans for the concepts of particle system as well as linear momentum conservation. A descriptive analysis method will be used in order to investigate the process of learning reconstruction carried out by students. In this process, the students’ conceptual understanding will be evaluated using essay tests for concepts of particle system and linear momentum conservation. The result shows that the learning reconstruction has successfully supported the students’ understanding of physics concept.

The use of advanced steam reforming technology for hydrogen production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abbishaw, J.B.; Cromarty, B.J.

1996-12-01

The demand for supplementary hydrogen production in refineries is growing significantly world-wide as environmental legislation concerning cleaner gasoline and diesel fuels is introduced. The main manufacturing method is by steam reforming. The process has been developed both to reduce the capital cost and increase efficiency, reliability and ease of operation. ICI Katalco`s Leading Concept Hydrogen or LCH process continues this process of improvement by replacing the conventional fired steam reformer with a type of heat exchange reformer known as the Gas Heated Reformer or GHR. The GHR was first used in the Leading Concept Ammonia process, LCA at ICI`s manufacturingmore » site at Severnside, England and commissioned in 1988 and later in the Leading Concept Methanol (LCM) process for methanol at Melbourne, Australia and commissioned in 1994. The development of the LCH process follows on from both LCA and LCM processes. This paper describes the development and use of the GHR in steam reforming, and shows how the GHR can be used in LCH. A comparison between the LCH process and a conventional hydrogen plant is given, showing the benefits of the LCH process in certain circumstances.« less

Integrated Technology Assessment Center (ITAC) Update

NASA Technical Reports Server (NTRS)

Taylor, J. L.; Neely, M. A.; Curran, F. M.; Christensen, E. R.; Escher, D.; Lovell, N.; Morris, Charles (Technical Monitor)

2002-01-01

The Integrated Technology Assessment Center (ITAC) has developed a flexible systems analysis framework to identify long-term technology needs, quantify payoffs for technology investments, and assess the progress of ASTP-sponsored technology programs in the hypersonics area. For this, ITAC has assembled an experienced team representing a broad sector of the aerospace community and developed a systematic assessment process complete with supporting tools. Concepts for transportation systems are selected based on relevance to the ASTP and integrated concept models (ICM) of these concepts are developed. Key technologies of interest are identified and projections are made of their characteristics with respect to their impacts on key aspects of the specific concepts of interest. Both the models and technology projections are then fed into the ITAC's probabilistic systems analysis framework in ModelCenter. This framework permits rapid sensitivity analysis, single point design assessment, and a full probabilistic assessment of each concept with respect to both embedded and enhancing technologies. Probabilistic outputs are weighed against metrics of interest to ASTP using a multivariate decision making process to provide inputs for technology prioritization within the ASTP. ITAC program is currently finishing the assessment of a two-stage-to-orbit (TSTO), rocket-based combined cycle (RBCC) concept and a TSTO turbine-based combined cycle (TBCC) concept developed by the team with inputs from NASA. A baseline all rocket TSTO concept is also being developed for comparison. Boeing has recently submitted a performance model for their Flexible Aerospace System Solution for Tomorrow (FASST) concept and the ISAT program will provide inputs for a single-stage-to-orbit (SSTO) TBCC based concept in the near-term. Both of these latter concepts will be analyzed within the ITAC framework over the summer. This paper provides a status update of the ITAC program.

Autism: a transdiagnostic, dimensional, construct of reasoning?

PubMed

Aggernaes, Bodil

2018-03-01

The concept of autism has changed across time, from the Bleulerian concept, which defined it as one of several symptoms of dementia praecox, to the present-day concept representing a pervasive development disorder. The present theoretical contribution to this special issue of EJN on autism introduces new theoretical ideas and discusses them in light of selected prior theories, clinical examples, and recent empirical evidence. The overall aim is to identify some present challenges of diagnostic practice and autism research and to suggest new pathways that may help direct future research. Future research must agree on the definitions of core concepts such as autism and psychosis. A possible redefinition of the concept of autism may be a condition in which the rationale of an individual's behaviour differs qualitatively from that of the social environment due to characteristic cognitive impairments affecting reasoning. A broad concept of psychosis could focus on deviances in the experience of reality resulting from impairments of reasoning. In this light and consistent with recent empirical evidence, it may be appropriate to redefine dementia praecox as a developmental disorder of reasoning. A future challenge of autism research may be to develop theoretical models that can account for the impact of complex processes acting at the social level in addition to complex neurobiological and psychological processes. Such models could profit from a distinction among processes related to (i) basic susceptibility, (ii) adaptive processes and (iii) decompensating factors involved in the development of manifest illness. © 2017 Federation of European Neuroscience Societies and John Wiley & Sons Ltd.

Teaching concept analysis to graduate nursing students.

PubMed

Schiller, Catharine J

2018-04-01

To provide guidance to educators who use the Wilson (1963) concept analysis method, as modified by Walker and Avant (2011), in their graduate nursing curriculum BACKGROUND: While graduate nursing curricula often include a concept analysis assignment, there is a paucity of literature to assist educators in guiding students through this challenging process. This article details one way for educators to assist graduate nursing students in learning how to undertake each step of the Wilson (1963) concept analysis method, as modified by Walker and Avant (2011). Wilson (1963) concept analysis method, as modified by Walker and Avant (2011). Using examples, this article walks the reader through the Walker and Avant (2011) concept analysis process and addresses those issues commonly encountered by educators during this process. This article presented one way of walking students through a Walker and Avant (2011) concept analysis. Having clear information about the steps involved in developing a concept analysis will make it easier for educators to incorporate it into their graduate nursing curriculum and to effectively guide students on their journey through this process. © 2018 Wiley Periodicals, Inc.

Research into language concepts for the mission control center

NASA Technical Reports Server (NTRS)

Dellenback, Steven W.; Barton, Timothy J.; Ratner, Jeremiah M.

1990-01-01

A final report is given on research into language concepts for the Mission Control Center (MCC). The Specification Driven Language research is described. The state of the image processing field and how image processing techniques could be applied toward automating the generation of the language known as COmputation Development Environment (CODE or Comp Builder) are discussed. Also described is the development of a flight certified compiler for Comps.

Development of an Electrochemistry Teaching Sequence using a Phenomenographic Approach

NASA Astrophysics Data System (ADS)

Rodriguez-Velazquez, Sorangel

Electrochemistry is the area of chemistry that studies electron transfer reactions across an interface. Chemistry education researchers have acknowledged that difficulties in electrochemistry instruction arise due to the level of abstraction of the topic, lack of adequate explanations and representations found in textbooks, and a quantitative emphasis in the application of concepts. Studies have identified conceptions (also referred to as misconceptions, alternative conceptions, etc.) about the electrochemical process that transcends academic and preparation levels (e.g., students and instructors) as well as cultural and educational settings. Furthermore, conceptual understanding of the electrochemical process requires comprehension of concepts usually studied in physics such as electric current, resistance and potential and often neglected in introductory chemistry courses. The lack of understanding of physical concepts leads to students. conceptions with regards to the relation between the concepts of redox reactions and electric circuits. The need for instructional materials to promote conceptual understanding of the electrochemical process motivated the development of the electrochemistry teaching sequence presented in this dissertation. Teaching sequences are educational tools that aim to bridge the gap between student conceptions and the scientific acceptable conceptions that instructors expect students to learn. This teaching sequence explicitly addresses known conceptions in electrochemistry and departs from traditional instruction in electrochemistry to reinforce students. previous knowledge in thermodynamics providing the foundation for the explicit relation of redox reactions and electric circuits during electrochemistry instruction. The scientific foundations of the electrochemical process are explained based on the Gibbs free energy (G) involved rather than on the standard redox potential values (E° ox/red) of redox half-reactions. Representations of the core concepts from discipline-specific models and theories serve as visual tools to describe reversible redox half-reactions at equilibrium, predict the spontaneity of the electrochemical process and explain interfacial equilibrium between redox species and electrodes in solution. The integration of physics concepts into electrochemistry instruction facilitated describing the interactions between the chemical system (e.g., redox species) and the external circuit (e.g., voltmeter). The "Two worlds" theoretical framework was chosen to anchor a robust educational design where the world of objects and events is deliberately connected to the world of theories and models. The core concepts in Marcus theory and density of states (DOS) provided the scientific foundations to connect both worlds. The design of this teaching sequence involved three phases; the selection of the content to be taught, the determination of a coherent and explicit connection among concepts and the development of educational activities to engage students in the learning process. The reduction-oxidation and electrochemistry chapters of three of the most popular general chemistry textbooks were revised in order to identify potential gaps during instruction, taking into consideration learning and teaching difficulties. The electrochemistry curriculum was decomposed into manageable sections contained in modules. Thirteen modules were developed and each module addresses specific conceptions with regard to terminology, redox reactions in electrochemical cells, and the function of the external circuit in electrochemical process. The electrochemistry teaching sequence was evaluated using a phenomenographic approach. This approach allows describing the qualitative variation in instructors' consciousness about the teaching of electrochemistry. A phenomenographic analysis revealed that the most relevant aspect of variation came from instructors' expertise. Participant A expertise (electrochemist) promoted in-depth discussions of fundamental theories and models that explain the electrochemical process while participant B expertise (general chemistry instruction) emphasized a coherent and explicit presentation of such theories and models to students. Other categories of variation were identified as: recognizing students' conceptions, the use of teaching resources and instructors' expectations for the teaching sequence. For example, while Participant B depended heavily on representations and explanations found in textbooks, participant A recognized misleading representations and oversimplified statements in general chemistry textbooks. Participant A was also more inclined to question the significance of some conceptions such as the correlation between the use of the term circuit and students' conceptions related to the movement of electrons in solution in an electrochemical cell. The electrochemistry teaching sequence in this dissertation fulfils each of the instructors' expectations with regards to the content that incorporated discipline-specific theories and models, explicit connections and flow among concepts, and addressing students' conceptions via the educational activities developed.

Textile technology development

NASA Technical Reports Server (NTRS)

Shah, Bharat M.

1995-01-01

The objectives of this report were to evaluate and select resin systems for Resin Transfer Molding (RTM) and Powder Towpreg Material, to develop and evaluate advanced textile processes by comparing 2-D and 3-D braiding for fuselage frame applications and develop window belt and side panel structural design concepts, to evaluate textile material properties, and to develop low cost manufacturing and tooling processes for the automated manufacturing of fuselage primary structures. This research was in support of the NASA and Langley Research Center (LaRc) Advanced Composite Structural Concepts and Materials Technologies for Primary Aircraft Structures program.

Low-Energy, Low-Cost Production of Ethylene by Low- Temperature Oxidative Coupling of Methane

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radaelli, Guido; Chachra, Gaurav; Jonnavittula, Divya

In this project, we develop a catalytic process technology for distributed small-scale production of ethylene by oxidative coupling of methane at low temperatures using an advanced catalyst. The Low Temperature Oxidative Coupling of Methane (LT-OCM) catalyst system is enabled by a novel chemical catalyst and process pioneered by Siluria, at private expense, over the last six years. Herein, we develop the LT-OCM catalyst system for distributed small-scale production of ethylene by identifying and addressing necessary process schemes, unit operations and process parameters that limit the economic viability and mass penetration of this technology to manufacture ethylene at small-scales. The outputmore » of this program is process concepts for small-scale LT-OCM catalyst based ethylene production, lab-scale verification of the novel unit operations adopted in the proposed concept, and an analysis to validate the feasibility of the proposed concepts.« less

A Curriculum for Logical Thinking. NAAESC Occasional Papers, Volume 1, Number 4.

ERIC Educational Resources Information Center

Charuhas, Mary S.

The purpose of this paper is to demonstrate methods for developing cognitive processes in adult students. It discusses concept formation and concept attainment, problem solving (which involves concept formation and concept attainment), Bruner's three stages of learning (enactive, iconic, and symbolic modes), and visual thinking. A curriculum for…

Enroute flight planning: Evaluating design concepts for the development of cooperative problem-solving concepts

NASA Technical Reports Server (NTRS)

Smith, Philip J.; Mccoy, C. Elaine

1991-01-01

The goals of this research were to develop design concepts to support the task of enroute flight planning. And within this context, to explore and evaluate general design concepts and principles to guide the development of cooperative problem solving systems. A detailed model is to be developed of the cognitive processes involved in flight planning. Included in this model will be the identification of individual differences of subjects. Of particular interest will be differences between pilots and dispatchers. The effect will be studied of the effect on performance of tools that support planning at different levels of abstraction. In order to conduct this research, the Flight Planning Testbed (FPT) was developed, a fully functional testbed environment for studying advanced design concepts for tools to aid in flight planning.

What Happens When You Push the Button? Analyzing the Functional Dynamics of Concept Development in Computer Supported Science Inquiry

ERIC Educational Resources Information Center

Arnseth, Hans Christian; Krange, Ingeborg

2016-01-01

In this article we analyze how the joint cognitive system of teacher and student actions mediated by cultural tools develops sense making of science concepts, and the use of concepts as tools for explaining phenomena and processes related to energy and energy transformation. We take a sociocultural approach to the analysis of how material and…

On the management and processing of earth resources information

NASA Technical Reports Server (NTRS)

Skinner, C. W.; Gonzalez, R. C.

1973-01-01

The basic concepts of a recently completed large-scale earth resources information system plan are reported. Attention is focused throughout the paper on the information management and processing requirements. After the development of the principal system concepts, a model system for implementation at the state level is discussed.

SEDS experiment design definition

NASA Technical Reports Server (NTRS)

Carroll, Joseph A.; Alexander, Charles M.; Oldson, John C.

1990-01-01

The Small Expendable-tether Deployment System (SEDS) was developed to design, build, integrate, fly, and safely deploy and release an expendable tether. A suitable concept for an on-orbit test of SEDS was developed. The following tasks were performed: (1) Define experiment objectives and requirements; (2) Define experiment concepts to reach those objectives; (3) Support NASA in experiment concept selection and definition; (4) Perform analyses and tests of SEDS hardware; (5) Refine the selected SEDS experiment concept; and (6) Support interactive SEDS system definition process. Results and conclusions are given.

Interactive Cohort Identification of Sleep Disorder Patients Using Natural Language Processing and i2b2.

PubMed

Chen, W; Kowatch, R; Lin, S; Splaingard, M; Huang, Y

2015-01-01

Nationwide Children's Hospital established an i2b2 (Informatics for Integrating Biology & the Bedside) application for sleep disorder cohort identification. Discrete data were gleaned from semistructured sleep study reports. The system showed to work more efficiently than the traditional manual chart review method, and it also enabled searching capabilities that were previously not possible. We report on the development and implementation of the sleep disorder i2b2 cohort identification system using natural language processing of semi-structured documents. We developed a natural language processing approach to automatically parse concepts and their values from semi-structured sleep study documents. Two parsers were developed: a regular expression parser for extracting numeric concepts and a NLP based tree parser for extracting textual concepts. Concepts were further organized into i2b2 ontologies based on document structures and in-domain knowledge. 26,550 concepts were extracted with 99% being textual concepts. 1.01 million facts were extracted from sleep study documents such as demographic information, sleep study lab results, medications, procedures, diagnoses, among others. The average accuracy of terminology parsing was over 83% when comparing against those by experts. The system is capable of capturing both standard and non-standard terminologies. The time for cohort identification has been reduced significantly from a few weeks to a few seconds. Natural language processing was shown to be powerful for quickly converting large amount of semi-structured or unstructured clinical data into discrete concepts, which in combination of intuitive domain specific ontologies, allows fast and effective interactive cohort identification through the i2b2 platform for research and clinical use.

Interactive Cohort Identification of Sleep Disorder Patients Using Natural Language Processing and i2b2

PubMed Central

Chen, W.; Kowatch, R.; Lin, S.; Splaingard, M.

2015-01-01

Summary Nationwide Children’s Hospital established an i2b2 (Informatics for Integrating Biology & the Bedside) application for sleep disorder cohort identification. Discrete data were gleaned from semistructured sleep study reports. The system showed to work more efficiently than the traditional manual chart review method, and it also enabled searching capabilities that were previously not possible. Objective We report on the development and implementation of the sleep disorder i2b2 cohort identification system using natural language processing of semi-structured documents. Methods We developed a natural language processing approach to automatically parse concepts and their values from semi-structured sleep study documents. Two parsers were developed: a regular expression parser for extracting numeric concepts and a NLP based tree parser for extracting textual concepts. Concepts were further organized into i2b2 ontologies based on document structures and in-domain knowledge. Results 26,550 concepts were extracted with 99% being textual concepts. 1.01 million facts were extracted from sleep study documents such as demographic information, sleep study lab results, medications, procedures, diagnoses, among others. The average accuracy of terminology parsing was over 83% when comparing against those by experts. The system is capable of capturing both standard and non-standard terminologies. The time for cohort identification has been reduced significantly from a few weeks to a few seconds. Conclusion Natural language processing was shown to be powerful for quickly converting large amount of semi-structured or unstructured clinical data into discrete concepts, which in combination of intuitive domain specific ontologies, allows fast and effective interactive cohort identification through the i2b2 platform for research and clinical use. PMID:26171080

Concept Engineering: An Investigation Of TIME versus Market Orientation in Product Concept Development

DTIC Science & Technology

1993-06-01

Designers and Champions of Innovation. Journal of Product Innovation Management . Vol. 8,91-103 Barabba, V. P., & Zaltman, G. (1991). Hearing the Voice of...Kleinschmidt, E. K. (1986). An Investigation into the New Product Process: Steps, Deficiencies, and Impact. Journal of Product Innovation Management . Vol...Product and Process Development. Journal of Product Innovation Management . Vol. 4,81-88 Goodman, M. (1974). Study Notes in System Dynamics. Cambridge, MA

Electronic Handbooks Simplify Process Management

NASA Technical Reports Server (NTRS)

2012-01-01

Getting a multitude of people to work together to manage processes across many organizations for example, flight projects, research, technologies, or data centers and others is not an easy task. Just ask Dr. Barry E. Jacobs, a research computer scientist at Goddard Space Flight Center. He helped NASA develop a process management solution that provided documenting tools for process developers and participants to help them quickly learn, adapt, test, and teach their views. Some of these tools included editable files for subprocess descriptions, document descriptions, role guidelines, manager worksheets, and references. First utilized for NASA's Headquarters Directives Management process, the approach led to the invention of a concept called the Electronic Handbook (EHB). This EHB concept was successfully applied to NASA's Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) programs, among other NASA programs. Several Federal agencies showed interest in the concept, so Jacobs and his team visited these agencies to show them how their specific processes could be managed by the methodology, as well as to create mockup versions of the EHBs.

National policy and military doctrine: development of a nuclear concept of land warfare, 1949-1964

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bockar, D.

In the thirty years that battle field nuclear weapons have been available, no one has originated an idea of how they might be used as an entirely new weapon. New weapons are routinely introduced into existing combat organizations before an appropriate tactical concept has been invented. But never before in history has a new weapon been deployed on so massive a scale without a tactical concept that exploited the radical implications of its novel technology for traditional warfare. This study is an attempt to understand the problem of developing a persuasive tactical concept for nuclear weapons. The process of assimilationmore » by which military organizations integrate new weapons with existing weapons in novel tactical and organizational concepts has an intellectual, and institutional, and a political dimension. The principle of civilian control, however, makes the process by which weapons are assimilated part of the process by which national security policies are made. In peacetime the military's formulation of doctrine is almost entirely consequent upon the world view, the methodological and managerial assumptions, and the domestic policy concerns of political authority.« less

Evaluation of competence-based teaching in higher education: From theory to practice.

PubMed

Bergsmann, Evelyn; Schultes, Marie-Therese; Winter, Petra; Schober, Barbara; Spiel, Christiane

2015-10-01

Competence-based teaching in higher education institutions and its evaluation have become a prevalent topic especially in the European Union. However, evaluation instruments are often limited, for example to single student competencies or specific elements of the teaching process. The present paper provides a more comprehensive evaluation concept that contributes to sustainable improvement of competence-based teaching in higher education institutions. The evaluation concept considers competence research developments as well as the participatory evaluation approach. The evaluation concept consists of three stages. The first stage evaluates whether the competencies students are supposed to acquire within the curriculum (ideal situation) are well defined. The second stage evaluates the teaching process and the competencies students have actually acquired (real situation). The third stage evaluates concrete aspects of the teaching process. Additionally, an implementation strategy is introduced to support the transfer from the theoretical evaluation concept to practice. The evaluation concept and its implementation strategy are designed for internal evaluations in higher education and primarily address higher education institutions that have already developed and conducted a competence-based curriculum. Copyright © 2015 Elsevier Ltd. All rights reserved.

Examining the margins: a concept analysis of marginalization.

PubMed

Vasas, Elyssa B

2005-01-01

The aim of this analysis is to explore the concept of social marginalization for the purpose of concept development. Specifically, the article intends to clarify the relationship between health disparities and marginalization and generate knowledge about working with people who are socially marginalized. Concept development evolved from the critical analysis of relevant literature generated through searches of nursing and social science databases. Literature was organized thematically and themes related to marginalization as a social process were included and analyzed. The article explores the challenges of using marginalization as an independent concept and suggests areas for future inquiry and research.

Self-Concept Development in Young Children

ERIC Educational Resources Information Center

Stenner, A. Jackson; Katzenmeyer, William G.

1976-01-01

Contrary to most theories, the child's concept of self crystalizes during the early school years, during which period a massive process of psychological and social maturation takes place. (Author/IRT)

Challenges in assessing college students' conception of duality: the case of infinity

NASA Astrophysics Data System (ADS)

Babarinsa-Ochiedike, Grace Olutayo

Interpreting students' views of infinity posits a challenge for researchers due to the dynamic nature of the conception. There is diversity and variation among students' process-object perceptions. The fluctuations between students' views however reveal an undeveloped duality conception. This study examined college students' conception of duality in understanding and representing infinity with the intent to design strategies that could guide researchers in categorizing students' views of infinity into different levels. Data for the study were collected from N=238 college students enrolled in Calculus sequence courses (Pre-Calculus, Calculus I through Calculus III) at one of the southwestern universities in the U.S. using self-report questionnaires and semi-structured individual task-based interviews. Data was triangulated using multiple measures analyzed by three independent experts using self-designed coding sheets to assess students' externalization of the duality conception of infinity. Results of this study reveal that college students' experiences in traditional Calculus sequence courses are not supportive of the development of duality conception. On the contrary, it strengthens the singularity perspective on fundamental ideas of mathematics such as infinity. The study also found that coding and assessing college students' conception of duality is a challenging and complex process due to the dynamic nature of the conception that is task-dependent and context-dependent. Practical significance of the study is that it helps to recognize misconceptions and starts addressing them so students will have a more comprehensive view of fundamental mathematical ideas as they progress through the Calculus coursework sequence. The developed duality concept development framework called Action-Process-Object-Duality (APOD) adapted from the APOS theory could guide educators and researchers as they engage in assessing students' conception of duality. The results of this study could serve as a facilitating instrument to further analyze cognitive obstacles in college students' understanding of the infinity concept.

Reading, Thinking, and Concept Development: Strategies for the Classroom.

ERIC Educational Resources Information Center

Harris, Theodore L., Ed.; Cooper, Eric J., Ed.

Intended to help teachers both improve students' text comprehension and better understand the teaching-learning process involved, this book focuses on comprehension and concept development as the central core of an effective educational program. The book's five sections deal with teaching explicit comprehension skills, precomprehension and…

PopGen Fishbowl: A Free Online Simulation Model of Microevolutionary Processes

ERIC Educational Resources Information Center

Jones, Thomas C.; Laughlin, Thomas F.

2010-01-01

Natural selection and other components of evolutionary theory are known to be particularly challenging concepts for students to understand. To help illustrate these concepts, we developed a simulation model of microevolutionary processes. The model features all the components of Hardy-Weinberg theory, with population size, selection, gene flow,…

"Competing Conceptions of Globalization" Revisited: Relocating the Tension between World-Systems Analysis and Globalization Analysis

ERIC Educational Resources Information Center

Clayton, Thomas

2004-01-01

In recent years, many scholars have become fascinated by a contemporary, multidimensional process that has come to be known as "globalization." Globalization originally described economic developments at the world level. More specifically, scholars invoked the concept in reference to the process of global economic integration and the seemingly…

Development of Problem-Based Learning Oriented Teaching Learning Materials to Facilitate Students’ Mastery of Concept and Critical Thinking Skill

NASA Astrophysics Data System (ADS)

Reza, M.; Ibrahim, M.; Rahayu, Y. S.

2018-01-01

This research aims to develop problem-based learning oriented teaching materials to improve students’ mastery of concept and critical thinking skill. Its procedure was divided into two phases; developmental phase and experimental phase. This developmental research used Four-D Model. However, within this research, the process of development would not involve the last stages, which is disseminate. The teaching learning materials which were developed consist of lesson plan, student handbook, student worksheet, achievement test and critical thinking skill test. The experimental phase employs a research design called one group pretest-posttest design. Results show that the validity of the teaching materials which were developed was good and revealed the enhancement of students’ activities with positive response to the teaching learning process. Furthermore, the learning materials improve the students’ mastery of concept and critical thinking skill.

Thiokol/Wasatch installation evaluation of the redesigned field joint protection system (concepts 1 and 3)

NASA Technical Reports Server (NTRS)

Cook, M.

1989-01-01

The procedures, performance, and results obtained from the Thiokol Corporation/Wasatch Redesigned Field Joint Protection System (FJPS) Installation Evaluation are documented. The purpose of the evaluation was to demonstrate and develop the procedures required to install two different concepts (referred to as Concepts 1 and 3) of the redesigned FJPS. The processing capability of each configuration was then evaluated and compared. The FJPS is installed on redesigned solid rocket motors (RSRM) to protect the field joints from rain intrusion and to maintain the joint temperature sensor measurement between 85 and 122 F while the boosters are on the launch pad. The FJPS is being redesigned to reduce installation timelines at KSC and to simplify or eliminate installation processing problems related to the present design of an EPDM moisture seal/extruded cork combination. Several installation techniques were evaluated, and a preferred method of application was developed for each concept. The installations were performed with the test article in the vertical (flight) position. Comparative timelines between the two concepts were also developed. An additional evaluation of the Concept 3 configuration was performed with the test article in the horizontal position, to simulate an overhead installation on a technical evaluation motor (TEM).

The effect of activity-based instruction on conceptual development of seventh grade students in probability

NASA Astrophysics Data System (ADS)

Gürbüz, Ramazan

2010-09-01

The purpose of this study is to investigate and compare the effects of activity-based and traditional instructions on students' conceptual development of certain probability concepts. The study was conducted using a pretest-posttest control group design with 80 seventh graders. A developed 'Conceptual Development Test' comprising 12 open-ended questions was administered on both groups of students before and after the intervention. The data were analysed using analysis of covariance, with the pretest as covariate. The results revealed that activity-based instruction (ABI) outperformed the traditional counterpart in the development of probability concepts. Furthermore, ABI was found to contribute students' conceptual development of the concept of 'Probability of an Event' the most, whereas to the concept of 'Sample Space' the least. As a consequence, it can be deduced that the designed instructional process was effective in the instruction of probability concepts.

EDOS operations concept and development approach

NASA Technical Reports Server (NTRS)

Knoble, G.; Garman, C.; Alcott, G.; Ramchandani, C.; Silvers, J.

1994-01-01

The Earth Observing System (EOS) Data and Operations System (EDOS) is being developed by the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC) for the capture, level zero processing, distribution, and backup archiving of high speed telemetry data received from EOS spacecraft. All data received will conform to the Consultative Committee for Space Data Standards (CCSDS) recommendations. The major EDOS goals are to: (1) minimize EOS program costs to implement and operate EDOS; (2) respond effectively to EOS growth requirements; and (3) maintain compatibility with existing and enhanced versions of NASA institutional systems required to support EOS spacecraft. In order to meet these goals, the following objectives have been defined for EDOS: (1) standardize EDOS interfaces to maximize utility for future requirements; (2) emphasize life-cycle cost (LCC) considerations (rather than procurement costs) in making design decisions and meeting reliability, maintainability, availability (RMA) and upgradability requirements; (3) implement data-driven operations to the maximum extent possible to minimize staffing requirements and to maximize system responsiveness; (4) provide a system capable of simultaneously supporting multiple spacecraft, each in different phases of their life-cycles; (5) provide for technology insertion features to accommodate growth and future LCC reductions during the operations phase; and (6) provide a system that is sufficiently robust to accommodate incremental performance upgrades while supporting operations. Operations concept working group meetings were facilitated to help develop the EDOS operations concept. This provided a cohesive concept that met with approval of responsible personnel from the start. This approach not only speeded up the development process by reducing review cycles, it also provided a medium for generating good ideas that were immediately molded into feasible concepts. The operations concept was then used as a basis for the EDOS specification. When it was felt that concept elements did not support detailed requirements, the facilitator process was used to resolve discrepancies or to add new concept elements to support the specification. This method provided an ongoing revisal of the operations concept and prevented large revisions at the end of the requirement analysis phase of system development.

Improving Students’ Science Process Skills through Simple Computer Simulations on Linear Motion Conceptions

NASA Astrophysics Data System (ADS)

Siahaan, P.; Suryani, A.; Kaniawati, I.; Suhendi, E.; Samsudin, A.

2017-02-01

The purpose of this research is to identify the development of students’ science process skills (SPS) on linear motion concept by utilizing simple computer simulation. In order to simplify the learning process, the concept is able to be divided into three sub-concepts: 1) the definition of motion, 2) the uniform linear motion and 3) the uniformly accelerated motion. This research was administered via pre-experimental method with one group pretest-posttest design. The respondents which were involved in this research were 23 students of seventh grade in one of junior high schools in Bandung City. The improving process of students’ science process skill is examined based on normalized gain analysis from pretest and posttest scores for all sub-concepts. The result of this research shows that students’ science process skills are dramatically improved by 47% (moderate) on observation skill; 43% (moderate) on summarizing skill, 70% (high) on prediction skill, 44% (moderate) on communication skill and 49% (moderate) on classification skill. These results clarify that the utilizing simple computer simulations in physics learning is be able to improve overall science skills at moderate level.

New Directions in the Study of Organizational Communication

ERIC Educational Resources Information Center

Farace, Richard V.; MacDonald, Donald

1974-01-01

The purpose of this paper is to describe important concepts for analyzing communication processes in organizations, and to point out some of the methodological developments related to these concepts. (Author)

Making clinical case-based learning in veterinary medicine visible: analysis of collaborative concept-mapping processes and reflections.

PubMed

Khosa, Deep K; Volet, Simone E; Bolton, John R

2014-01-01

The value of collaborative concept mapping in assisting students to develop an understanding of complex concepts across a broad range of basic and applied science subjects is well documented. Less is known about students' learning processes that occur during the construction of a concept map, especially in the context of clinical cases in veterinary medicine. This study investigated the unfolding collaborative learning processes that took place in real-time concept mapping of a clinical case by veterinary medical students and explored students' and their teacher's reflections on the value of this activity. This study had two parts. The first part investigated the cognitive and metacognitive learning processes of two groups of students who displayed divergent learning outcomes in a concept mapping task. Meaningful group differences were found in their level of learning engagement in terms of the extent to which they spent time understanding and co-constructing knowledge along with completing the task at hand. The second part explored students' and their teacher's views on the value of concept mapping as a learning and teaching tool. The students' and their teacher's perceptions revealed congruent and contrasting notions about the usefulness of concept mapping. The relevance of concept mapping to clinical case-based learning in veterinary medicine is discussed, along with directions for future research.

Concept Formation and the Development of Language. Theoretical Paper No. 37.

ERIC Educational Resources Information Center

Nelson, Gordon K.

This paper examines possible interchanges between cognitive and language processes with particular attention given to concept formation and semantic language development. Aspects of psychological and contemporary linguistic theories are discussed as a way to interrelate the functions of thought and language. The author concludes that while…

Concept Recognition in an Automatic Text-Processing System for the Life Sciences.

ERIC Educational Resources Information Center

Vleduts-Stokolov, Natasha

1987-01-01

Describes a system developed for the automatic recognition of biological concepts in titles of scientific articles; reports results of several pilot experiments which tested the system's performance; analyzes typical ambiguity problems encountered by the system; describes a disambiguation technique that was developed; and discusses future plans…

Possible Science Selves: Informal Learning and the Career Interest Development Process

ERIC Educational Resources Information Center

Mills, Leila A.

2014-01-01

This research examines the relationship between career related self-concept and dimensions of informal learning of science. The overlapping dimensions of career interest development and informal learning suggest that self-directed informal learning of science can advance individual self-concept for "possible scientific self." Possible…

Children's Conceptions of Career Choice and Attainment: Model Development

ERIC Educational Resources Information Center

Howard, Kimberly A. S.; Walsh, Mary E.

2011-01-01

This article describes a model of children's conceptions of two key career development processes: career choice and career attainment. The model of children's understanding of career choice and attainment was constructed with developmental research and theory into children's understanding of allied phenomena such as their understanding of illness,…

Dynamic Assessment of EFL Learners' Listening Comprehension via Computerized Concept Mapping

ERIC Educational Resources Information Center

Ebadi, Saman; Latif, Shokoufeh Vakili

2015-01-01

In Vygotsky's theory, learner's Zone of Proximal Development (ZPD) and autonomous performance could be further developed through social interaction with an expert. Computerized concept mapping enjoys the advantage of meeting learners' differences and therefore can be applied as a scaffold to support learning process.Taking a dynamic assessment…

Space station automation study: Automation requriements derived from space manufacturing concepts,volume 2

NASA Technical Reports Server (NTRS)

1984-01-01

Automation reuirements were developed for two manufacturing concepts: (1) Gallium Arsenide Electroepitaxial Crystal Production and Wafer Manufacturing Facility, and (2) Gallium Arsenide VLSI Microelectronics Chip Processing Facility. A functional overview of the ultimate design concept incoporating the two manufacturing facilities on the space station are provided. The concepts were selected to facilitate an in-depth analysis of manufacturing automation requirements in the form of process mechanization, teleoperation and robotics, sensors, and artificial intelligence. While the cost-effectiveness of these facilities was not analyzed, both appear entirely feasible for the year 2000 timeframe.

Selecting concepts for a concept-based curriculum: application of a benchmark approach.

PubMed

Giddens, Jean Foret; Wright, Mary; Gray, Irene

2012-09-01

In response to a transformational movement in nursing education, faculty across the country are considering changes to curricula and approaches to teaching. As a result, an emerging trend in many nursing programs is the adoption of a concept-based curriculum. As part of the curriculum development process, the selection of concepts, competencies, and exemplars on which to build courses and base content is needed. This article presents a benchmark approach used to validate and finalize concept selection among educators developing a concept-based curriculum for a statewide nursing consortium. These findings are intended to inform other nurse educators who are currently involved with or are considering this curriculum approach. Copyright 2012, SLACK Incorporated.

Biological embedding: evaluation and analysis of an emerging concept for nursing scholarship.

PubMed

Nist, Marliese Dion

2017-02-01

The purpose of this paper was to report the analysis of the concept of biological embedding. Research that incorporates a life course perspective is becoming increasingly prominent in the health sciences. Biological embedding is a central concept in life course theory and may be important for nursing theories to enhance our understanding of health states in individuals and populations. Before the concept of biological embedding can be used in nursing theory and research, an analysis of the concept is required to advance it towards full maturity. Concept analysis. PubMed, CINAHL and PsycINFO were searched for publications using the term 'biological embedding' or 'biological programming' and published through 2015. An evaluation of the concept was first conducted to determine the concept's level of maturity and was followed by a concept comparison, using the methods for concept evaluation and comparison described by Morse. A consistent definition of biological embedding - the process by which early life experience alters biological processes to affect adult health outcomes - was found throughout the literature. The concept has been used in several theories that describe the mechanisms through which biological embedding might occur and highlight its role in the development of health trajectories. Biological embedding is a partially mature concept, requiring concept comparison with an overlapping concept - biological programming - to more clearly establish the boundaries of biological embedding. Biological embedding has significant potential for theory development and application in multiple academic disciplines, including nursing. © 2016 John Wiley & Sons Ltd.

Tools for Observation: Art and the Scientific Process

NASA Astrophysics Data System (ADS)

Pettit, E. C.; Coryell-Martin, M.; Maisch, K.

2015-12-01

Art can support the scientific process during different phases of a scientific discovery. Art can help explain and extend the scientific concepts for the general public; in this way art is a powerful tool for communication. Art can aid the scientist in processing and interpreting the data towards an understanding of the concepts and processes; in this way art is powerful - if often subconscious - tool to inform the process of discovery. Less often acknowledged, art can help engage students and inspire scientists during the initial development of ideas, observations, and questions; in this way art is a powerful tool to develop scientific questions and hypotheses. When we use art as a tool for communication of scientific discoveries, it helps break down barriers and makes science concepts less intimidating and more accessible and understandable for the learner. Scientists themselves use artistic concepts and processes - directly or indirectly - to help deepen their understanding. Teachers are following suit by using art more to stimulate students' creative thinking and problem solving. We show the value of teaching students to use the artistic "way of seeing" to develop their skills in observation, questioning, and critical thinking. In this way, art can be a powerful tool to engage students (from elementary to graduate) in the beginning phase of a scientific discovery, which is catalyzed by inquiry and curiosity. Through qualitative assessment of the Girls on Ice program, we show that many of the specific techniques taught by art teachers are valuable for science students to develop their observation skills. In particular, the concepts of contour drawing, squinting, gesture drawing, inverted drawing, and others can provide valuable training for student scientists. These art techniques encourage students to let go of preconceptions and "see" the world (the "data") in new ways they help students focus on both large-scale patterns and small-scale details.

A concept taxonomy and an instrument hierarchy: tools for establishing and evaluating the conceptual framework of a patient-reported outcome (PRO) instrument as applied to product labeling claims.

PubMed

Erickson, Pennifer; Willke, Richard; Burke, Laurie

2009-01-01

To facilitate development and evaluation of a PRO instrument conceptual framework, we propose two tools--a PRO concept taxonomy and a PRO instrument hierarchy. FDA's draft guidance on patient reported outcome (PRO) measures states that a clear description of the conceptual framework of an instrument is useful for evaluating its adequacy to support a treatment benefit claim for use in product labeling the draft guidance, however does not propose tools for establishing or evaluating a PRO instrument's conceptual framework. We draw from our review of PRO concepts and instruments that appear in prescription drug labeling approved in the United States from 1997 to 2007. We propose taxonomy terms that define relationships between PRO concepts, including "family,"compound concept," and "singular concept." Based on the range of complexity represented by the concepts, as defined by the taxonomy, we propose nine instrument orders for PRO measurement. The nine orders range from individual event counts to multi-item, multiscale instruments. This analysis of PRO concepts and instruments illustrates that the taxonomy and hierarchy are applicable to PRO concepts across a wide range of therapeutic areas and provide a basis for defining the instrument conceptual framework complexity. Although the utility of these tools in the drug development, review, and approval processes has not yet been demonstrated, these tools could be useful to improve communication and enhance efficiency in the instrument development and review process.

Introducing new technologies into Space Station subsystems

NASA Technical Reports Server (NTRS)

Wiskerchen, Michael J.; Mollakarimi, Cindy L.

1989-01-01

A new systems engineering technology has been developed and applied to Shuttle processing. The new engineering approach emphasizes the identification, quantitative assessment, and management of system performance and risk related to the dynamic nature of requirements, technology, and operational concepts. The Space Shuttle Tile Automation System is described as an example of the first application of the new engineering technology. Lessons learned from the Shuttle processing experience are examined, and concepts are presented which are applicable to the design and development of the Space Station Freedom.

Combining Natural Language Processing and Statistical Text Mining: A Study of Specialized versus Common Languages

ERIC Educational Resources Information Center

Jarman, Jay

2011-01-01

This dissertation focuses on developing and evaluating hybrid approaches for analyzing free-form text in the medical domain. This research draws on natural language processing (NLP) techniques that are used to parse and extract concepts based on a controlled vocabulary. Once important concepts are extracted, additional machine learning algorithms,…

Software engineering aspects of real-time programming concepts

NASA Astrophysics Data System (ADS)

Schoitsch, Erwin

1986-08-01

Real-time programming is a discipline of great importance not only in process control, but also in fields like communication, office automation, interactive databases, interactive graphics and operating systems development. General concepts of concurrent programming and constructs for process-synchronization are discussed in detail. Tasking and synchronization concepts, methods of process communication, interrupt and timeout handling in systems based on semaphores, signals, conditional critical regions or on real-time languages like Concurrent PASCAL, MODULA, CHILL and ADA are explained and compared with each other. The second part deals with structuring and modularization of technical processes to build reliable and maintainable real time systems. Software-quality and software engineering aspects are considered throughout the paper.

Life-Span Learning: A Developmental Perspective

ERIC Educational Resources Information Center

Thornton, James E.

2003-01-01

The article discusses learning as embedded processes of development and aging, and as social activity over the life course. The concept of life-span learning is proposed and outlined to discuss these processes as aspects of and propositions in life-span development and aging theory. Life-span learning processes arise and continuously develop in a…

Cost studies for commercial fuselage crown designs

NASA Technical Reports Server (NTRS)

Walker, T. H.; Smith, P. J.; Truslove, G.; Willden, K. S.; Metschan, S. L.; Pfahl, C. L.

1991-01-01

Studies were conducted to evaluate the cost and weight potential of advanced composite design concepts in the crown region of a commercial transport. Two designs from each of three design families were developed using an integrated design-build team. A range of design concepts and manufacturing processes were included to allow isolation and comparison of cost centers. Detailed manufacturing/assembly plans were developed as the basis for cost estimates. Each of the six designs was found to have advantages over the 1995 aluminum benchmark in cost and weight trade studies. Large quadrant panels and cobonded frames were found to save significant assembly labor costs. Comparisons of high- and intermediate-performance fiber systems were made for skin and stringer applications. Advanced tow placement was found to be an efficient process for skin lay up. Further analysis revealed attractive processes for stringers and frames. Optimized designs were informally developed for each design family, combining the most attractive concepts and processes within that family. A single optimized design was selected as the most promising, and the potential for further optimization was estimated. Technical issues and barriers were identified.

Frameworks for Proof-of-Concept Clinical Trials of Interventions That Target Fundamental Aging Processes

PubMed Central

Justice, Jamie; Miller, Jordan D.; Newman, John C.; Hashmi, Shahrukh K.; Halter, Jeffrey; Austad, Steve N.; Barzilai, Nir

2016-01-01

Therapies targeted at fundamental processes of aging may hold great promise for enhancing the health of a wide population by delaying or preventing a range of age-related diseases and conditions—a concept dubbed the “geroscience hypothesis.” Early, proof-of-concept clinical trials will be a key step in the translation of therapies emerging from model organism and preclinical studies into clinical practice. This article summarizes the outcomes of an international meeting partly funded through the NIH R24 Geroscience Network, whose purpose was to generate concepts and frameworks for early, proof-of-concept clinical trials for therapeutic interventions that target fundamental processes of aging. The goals of proof-of-concept trials include generating preliminary signals of efficacy in an aging-related disease or outcome that will reduce the risk of conducting larger trials, contributing data and biological samples to support larger-scale research by strategic networks, and furthering a dialogue with regulatory agencies on appropriate registration indications. We describe three frameworks for proof-of-concept trials that target age-related chronic diseases, geriatric syndromes, or resilience to stressors. We propose strategic infrastructure and shared resources that could accelerate development of therapies that target fundamental aging processes. PMID:27535966

Consensus statement: Supporting Safer Conception and Pregnancy For Men And Women Living with and Affected by HIV.

PubMed

Matthews, Lynn T; Beyeza-Kashesya, Jolly; Cooke, Ian; Davies, Natasha; Heffron, Renee; Kaida, Angela; Kinuthia, John; Mmeje, Okeoma; Semprini, Augusto E; Weber, Shannon

2018-06-01

Safer conception interventions reduce HIV incidence while supporting the reproductive goals of people living with or affected by HIV. We developed a consensus statement to address demand, summarize science, identify information gaps, outline research and policy priorities, and advocate for safer conception services. This statement emerged from a process incorporating consultation from meetings, literature, and key stakeholders. Three co-authors developed an outline which was discussed and modified with co-authors, working group members, and additional clinical, policy, and community experts in safer conception, HIV, and fertility. Co-authors and working group members developed and approved the final manuscript. Consensus across themes of demand, safer conception strategies, and implementation were identified. There is demand for safer conception services. Access is limited by stigma towards PLWH having children and limits to provider knowledge. Efficacy, effectiveness, safety, and acceptability data support a range of safer conception strategies including ART, PrEP, limiting condomless sex to peak fertility, home insemination, male circumcision, STI treatment, couples-based HIV testing, semen processing, and fertility care. Lack of guidelines and training limit implementation. Key outstanding questions within each theme are identified. Consumer demand, scientific data, and global goals to reduce HIV incidence support safer conception service implementation. We recommend that providers offer services to HIV-affected men and women, and program administrators integrate safer conception care into HIV and reproductive health programs. Answers to outstanding questions will refine services but should not hinder steps to empower people to adopt safer conception strategies to meet reproductive goals.

Satellite Power System (SPS) FY 79 program summary

NASA Technical Reports Server (NTRS)

1980-01-01

The Satellite Power System (SPS) program a joint effort to develop an initial understanding of the technical feasibility, the economic practicality, and the social and environmental acceptability of the SPS concept is discussed. This is being accomplished through implementation of the Concept Development and Evaluation Program Plan which is scheduled for completion by the end of FY 1980. This Program Summary not only covers FY 1979 but includes work completed in FY 1977 and FY 1978 in order to give a comprehensive picture of the DOE involvement in the SPS concept development and evaluation process.

Decision Making in Nursing Practice: A Concept Analysis.

PubMed

Johansen, Mary L; O'Brien, Janice L

2016-01-01

The study aims to gain an understanding of the concept of decision making as it relates to the nurse practice environment. Rodgers' evolutionary method on concept analysis was used as a framework for the study of the concept. Articles from 1952 to 2014 were reviewed from PsycINFO, Medline, Cumulative Index to Nursing and Allied Health Literature (CINAHL), JSTOR, PubMed, and Science Direct. Findings suggest that decision making in the nurse practice environment is a complex process, integral to the nursing profession. The definition of decision making, and the attributes, antecedents, and consequences, are discussed. Contextual factors that influence the process are also discussed. An exemplar is presented to illustrate the concept. Decision making in the nurse practice environment is a dynamic conceptual process that may affect patient outcomes. Nurses need to call upon ways of knowing to make sound decisions and should be self-reflective in order to develop the process further in the professional arena. The need for further research is discussed. © 2015 Wiley Periodicals, Inc.

Sociopolitical development.

PubMed

Watts, Roderick J; Williams, Nat Chioke; Jagers, Robert J

2003-03-01

This paper examines theories and concepts relevant to sociopolitical development (SPD). As an emerging theory, SPD expands on empowerment and similar ideas related to social change and activism in community psychology--oppression, liberation, critical consciousness, and culture among them. SPD is the process by which individuals acquire the knowledge, analytical skills, emotional faculties, and the capacity for action in political and social systems necessary to interpret and resist oppression. Equally as important is a vision of liberation that is an alternative to oppressive conditions. All of these concepts have been underemphasized in the social change literature of U.S. community psychology. In our view, sociopolitical development is vital to human development and the creation of a just society. As part of identifying and illustrating concepts and processes relevant to SPD theory, we will draw from the words of young African American activists who were interviewed as part of a research study.

Issues and challenges of involving users in medical device development.

PubMed

Bridgelal Ram, Mala; Grocott, Patricia R; Weir, Heather C M

2008-03-01

User engagement has become a central tenet of health-care policy. This paper reports on a case study in progress that highlights user engagement in the research process in relation to medical device development. To work with a specific group of medical device users to uncover unmet needs, translating these into design concepts, novel technologies and products. To validate a knowledge transfer model that may be replicated for a range of medical device applications and user groups. In depth qualitative case study to elicit and analyse user needs. The focus is on identifying design concepts for medical device applications from unmet needs, and validating these in an iterative feedback loop to the users. The case study has highlighted three interrelated challenges: ensuring unmet needs drive new design concepts and technology development; managing user expectations and managing the research process. Despite the challenges, active participation of users is crucial to developing usable and clinically effective devices.

CNS development: an overview

NASA Technical Reports Server (NTRS)

Nowakowski, R. S.; Hayes, N. L.

1999-01-01

The basic principles of the development of the central nervous system (CNS) are reviewed, and their implications for both normal and abnormal development of the brain are discussed. The goals of this review are (a) to provide a set of concepts to aid in understanding the variety of complex processes that occur during CNS development, (b) to illustrate how these concepts contribute to our knowledge of the normal anatomy of the adult brain, and (c) to provide a basis for understanding how modifications of normal developmental processes by traumatic injury, by environmental or experiential influences, or by genetic variations may lead to modifications in the resultant structure and function of the adult CNS.

Classification of Concepts in Consumer Education. Consumer Education Development Program: A National Study.

ERIC Educational Resources Information Center

Bannister, Rosella; Monsma, Charles

This guide for program planners and curriculum developers identifies and describes the basic concepts in consumer education. Consumer education is defined as the process of gaining the knowledge and skills needed in managing consumer resources and taking actions to influence the factors which affect consumer decisions. The primary focus of…

Development of an Empirically Based Learning Performances Framework for Third-Grade Students' Model-Based Explanations about Plant Processes

ERIC Educational Resources Information Center

Zangori, Laura; Forbes, Cory T.

2016-01-01

To develop scientific literacy, elementary students should engage in knowledge building of core concepts through scientific practice (Duschl, Schweingruber, & Schouse, 2007). A core scientific practice is engagement in scientific modeling to build conceptual understanding about discipline-specific concepts. Yet scientific modeling remains…

Students' Conceptions of Learning in the Context of an Accounting Degree

ERIC Educational Resources Information Center

Abhayawansa, Subhash; Bowden, Mark; Pillay, Soma

2017-01-01

Students' conceptions of learning (CoL) play an important role in the learning process leading to the development of generic skills. This paper investigates whether CoL of accounting students can be developed by incorporating high-level cognitive skills progressively within the accounting curriculum. First, the study explored, using…

The Toddler and the Pre-Schooler. Unit for Child Studies. Selected Papers Number 29.

ERIC Educational Resources Information Center

Phillips, Shelley

This description of toddlers and preschool children emphasizes how young children think and describes the development of self-concept. Language development and antisocial and prosocial behavior are also discussed. The exploration of children's thought processes begins with two principles: (1) Concepts originate in activity; and (2) Motor…

FOCUS: A Model of Sensemaking

DTIC Science & Technology

2007-05-01

of the current project was to unpack and develop the concept of sensemaking, principally by developing and testing a cognitive model of the processes...themselves. In Year 2, new Cognitive Task Analysis data collection methods were developed and used to further test the model. Cognitive Task Analysis is a...2004) to examine the phenomenon of "sensemaking," a concept initially formulated by Weick (1995), but not developed from a cognitive perspective

Astronomy in Early Childhood Education: A Concept-Based Approach

ERIC Educational Resources Information Center

Ampartzaki, Maria; Kalogiannakis, Michail

2016-01-01

In an attempt to understand the natural world's phenomena, young children form their perceptions of different aspects of the macrocosm, which they contrast with new scientific concepts. This process calls for an early intervention that will provide the stimuli and the tools for the development of new concepts, ideas, and cognitive structures. The…

Teaching Conceptually Oriented Social Science Education Programs in the Elementary School.

ERIC Educational Resources Information Center

Mahlios, Marc C.

Approaches to elementary social studies education that focus on concept and inquiry learning are outlined. The basic goal of the teacher in concept teaching is to aid the student in developing relationships among factual learning, conceptualization, and personal behavior. Learning activities should focus on the process concept (i.e., one that is…

Developing Governmentality: Conduct [to the third power] and Education Policy

ERIC Educational Resources Information Center

Gillies, Donald

2008-01-01

This article examines education policy and the policy process in the light of two key concepts. The first is the concept of "governmentality" from the work of Michel Foucault (1991). The second is the concept of "political spectacle" from the work of Murray Edelman (1985, 1988). Taking note, further, of recent work by…

Open Textbook Proof-of-Concept via Connexions

ERIC Educational Resources Information Center

Baker, Judy; Thierstein, Joel; Fletcher, Kathi; Kaur, Manpreet; Emmons, Jonathan

2009-01-01

To address the high cost of textbooks, Rice University's Connexions and the Community College Open Textbook Project (CCOTP) collaborated to develop a proof-of-concept free and open textbook. The proof-of-concept served to document a workflow process that would support adoption of open textbooks. Open textbooks provide faculty and students with a…

Face-space: A unifying concept in face recognition research.

PubMed

Valentine, Tim; Lewis, Michael B; Hills, Peter J

2016-10-01

The concept of a multidimensional psychological space, in which faces can be represented according to their perceived properties, is fundamental to the modern theorist in face processing. Yet the idea was not clearly expressed until 1991. The background that led to the development of face-space is explained, and its continuing influence on theories of face processing is discussed. Research that has explored the properties of the face-space and sought to understand caricature, including facial adaptation paradigms, is reviewed. Face-space as a theoretical framework for understanding the effect of ethnicity and the development of face recognition is evaluated. Finally, two applications of face-space in the forensic setting are discussed. From initially being presented as a model to explain distinctiveness, inversion, and the effect of ethnicity, face-space has become a central pillar in many aspects of face processing. It is currently being developed to help us understand adaptation effects with faces. While being in principle a simple concept, face-space has shaped, and continues to shape, our understanding of face perception.

a New Initiative for Tiling, Stitching and Processing Geospatial Big Data in Distributed Computing Environments

NASA Astrophysics Data System (ADS)

Olasz, A.; Nguyen Thai, B.; Kristóf, D.

2016-06-01

Within recent years, several new approaches and solutions for Big Data processing have been developed. The Geospatial world is still facing the lack of well-established distributed processing solutions tailored to the amount and heterogeneity of geodata, especially when fast data processing is a must. The goal of such systems is to improve processing time by distributing data transparently across processing (and/or storage) nodes. These types of methodology are based on the concept of divide and conquer. Nevertheless, in the context of geospatial processing, most of the distributed computing frameworks have important limitations regarding both data distribution and data partitioning methods. Moreover, flexibility and expendability for handling various data types (often in binary formats) are also strongly required. This paper presents a concept for tiling, stitching and processing of big geospatial data. The system is based on the IQLib concept (https://github.com/posseidon/IQLib/) developed in the frame of the IQmulus EU FP7 research and development project (http://www.iqmulus.eu). The data distribution framework has no limitations on programming language environment and can execute scripts (and workflows) written in different development frameworks (e.g. Python, R or C#). It is capable of processing raster, vector and point cloud data. The above-mentioned prototype is presented through a case study dealing with country-wide processing of raster imagery. Further investigations on algorithmic and implementation details are in focus for the near future.

Aeronautics Autonomy Testbed Capability (AATC) Team Developed Concepts

NASA Technical Reports Server (NTRS)

Smith, Phillip J.

2018-01-01

In 2015, the National Aeronautics and Space Administration (NASA) formed a multi-center, interdisciplinary team of engineers from three different aeronautics research centers who were tasked with improving NASA autonomy research capabilities. This group was subsequently named the Aeronautics Autonomy Testbed Capability (AATC) team. To aid in confronting the autonomy research directive, NASA contracted IDEO, a design firm, to provide consultants and guides to educate NASA engineers through the practice of design thinking, which is an unconventional method for aerospace design processes. The team then began learning about autonomy research challenges by conducting interviews with a diverse group of researchers and pilots, military personnel and civilians, experts and amateurs. Part of this design thinking process involved developing ideas for products or programs known as concepts that could enable real world fulfillment of the most important latent needs identified through analysis of the interviews. The concepts are intended to be sacrificial, intermediate steps in the design thinking process and are presented in this report to record the efforts of the AATC group. Descriptions are provided in present tense to allow for further ideation and imagining the concept as reality as was attempted during the teams discussions and interviews. This does not indicate that the concepts are actually in practice within NASA though there may be similar existing programs independent of AATC. These concepts were primarily created at two distinct stages during the design thinking process. After the initial interviews, there was a workshop for concept development and the resulting ideas are shown in this work as from the First Round. As part of succeeding interviews, the team members presented the First Round concepts to refine the understanding of existing research needs. This knowledge was then used to generate an additional set of concepts denoted as the Second Round. Some concepts were created by a single person in a few minutes while others were refined by the entire team over several weeks. Thus, certain ideas are more detailed than others but those from the second round are not necessarily more comprehensive than the first round concepts. Primarily, as reported here in the Second Round section, the designs serve to encompass more of the high level end user research needs which were not necessarily known to the team during the prior workshop. In the figures provided throughout this report, illustrations are often provided to represent a concept. Nearly all of the images are informal sketches or renderings and this casualness should, hopefully, not be held to negate the potential insights available within the concepts.

Closed cycle construction: an integrated process for the separation and reuse of C&D waste.

PubMed

Mulder, Evert; de Jong, Tako P R; Feenstra, Lourens

2007-01-01

In The Netherlands, construction and demolition (C&D) waste is already to a large extent being reused, especially the stony fraction, which is crushed and reused as a road base material. In order to increase the percentage of reuse of the total C&D waste flow to even higher levels, a new concept has been developed. In this concept, called 'Closed Cycle Construction', the processed materials are being reused at a higher quality level and the quantity of waste that has to be disposed of is minimised. For concrete and masonry, the new concept implies that the material cycle will be completely closed, and the original constituents (clay bricks, gravel, sand, cement stone) are recovered in thermal processes. The mixed C&D waste streams are separated and decontaminated. For this purpose several dry separation techniques are being developed. The quality of the stony fraction is improved so much, that this fraction can be reused as an aggregate in concrete. The new concept has several benefits from a sustainability point of view, namely less energy consumption, less carbon dioxide emission, less waste production and less land use (for excavation and disposal sites). One of the most remarkable benefits of the new concept is that the thermal process steps are fuelled with the combustible fraction of the C&D waste itself. Economically the new process is more or less comparable with the current way of processing C&D waste. On the basis of the positive results of a feasibility study, currently a pilot and demonstration project is being carried out. The aim is to optimise the different process steps of the Closed Cycle Construction process on a laboratory scale, and then to verify them on a large scale. The results of the project are promising, so far.

Evaluation of natural language processing from emergency department computerized medical records for intra-hospital syndromic surveillance

PubMed Central

2011-01-01

Background The identification of patients who pose an epidemic hazard when they are admitted to a health facility plays a role in preventing the risk of hospital acquired infection. An automated clinical decision support system to detect suspected cases, based on the principle of syndromic surveillance, is being developed at the University of Lyon's Hôpital de la Croix-Rousse. This tool will analyse structured data and narrative reports from computerized emergency department (ED) medical records. The first step consists of developing an application (UrgIndex) which automatically extracts and encodes information found in narrative reports. The purpose of the present article is to describe and evaluate this natural language processing system. Methods Narrative reports have to be pre-processed before utilizing the French-language medical multi-terminology indexer (ECMT) for standardized encoding. UrgIndex identifies and excludes syntagmas containing a negation and replaces non-standard terms (abbreviations, acronyms, spelling errors...). Then, the phrases are sent to the ECMT through an Internet connection. The indexer's reply, based on Extensible Markup Language, returns codes and literals corresponding to the concepts found in phrases. UrgIndex filters codes corresponding to suspected infections. Recall is defined as the number of relevant processed medical concepts divided by the number of concepts evaluated (coded manually by the medical epidemiologist). Precision is defined as the number of relevant processed concepts divided by the number of concepts proposed by UrgIndex. Recall and precision were assessed for respiratory and cutaneous syndromes. Results Evaluation of 1,674 processed medical concepts contained in 100 ED medical records (50 for respiratory syndromes and 50 for cutaneous syndromes) showed an overall recall of 85.8% (95% CI: 84.1-87.3). Recall varied from 84.5% for respiratory syndromes to 87.0% for cutaneous syndromes. The most frequent cause of lack of processing was non-recognition of the term by UrgIndex (9.7%). Overall precision was 79.1% (95% CI: 77.3-80.8). It varied from 81.4% for respiratory syndromes to 77.0% for cutaneous syndromes. Conclusions This study demonstrates the feasibility of and interest in developing an automated method for extracting and encoding medical concepts from ED narrative reports, the first step required for the detection of potentially infectious patients at epidemic risk. PMID:21798029

Development of Textile Reinforced Composites for Aircraft Structures

NASA Technical Reports Server (NTRS)

Dexter, H. Benson

1998-01-01

NASA has been a leader in development of composite materials for aircraft applications during the past 25 years. In the early 1980's NASA and others conducted research to improve damage tolerance of composite structures through the use of toughened resins but these resins were not cost-effective. The aircraft industry wanted affordable, robust structures that could withstand the rigors of flight service with minimal damage. The cost and damage tolerance barriers of conventional laminated composites led NASA to focus on new concepts in composites which would incorporate the automated manufacturing methods of the textiles industry and which would incorporate through-the-thickness reinforcements. The NASA Advanced Composites Technology (ACT) Program provided the resources to extensively investigate the application of textile processes to next generation aircraft wing and fuselage structures. This paper discusses advanced textile material forms that have been developed, innovative machine concepts and key technology advancements required for future application of textile reinforced composites in commercial transport aircraft. Multiaxial warp knitting, triaxial braiding and through-the-thickness stitching are the three textile processes that have surfaced as the most promising for further development. Textile reinforced composite structural elements that have been developed in the NASA ACT Program are discussed. Included are braided fuselage frames and window-belt reinforcements, woven/stitched lower fuselage side panels, stitched multiaxial warp knit wing skins, and braided wing stiffeners. In addition, low-cost processing concepts such as resin transfer molding (RTM), resin film infusion (RFI), and vacuum-assisted resin transfer molding (VARTM) are discussed. Process modeling concepts to predict resin flow and cure in textile preforms are also discussed.

Fabrication of an interim complete removable dental prosthesis with an in-office digital light processing three-dimensional printer: A proof-of-concept technique.

PubMed

Lin, Wei-Shao; Harris, Bryan T; Pellerito, John; Morton, Dean

2018-04-30

This report describes a proof of concept for fabricating an interim complete removable dental prosthesis with a digital light processing 3-dimensional (3D) printer. Although an in-office 3D printer can reduce the overall production cost for an interim complete removable dental prosthesis, the process has not been validated with clinical studies. This report provided a preliminary proof of concept in developing a digital workflow for the in-office additively manufactured interim complete removable dental prosthesis. Copyright © 2018 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Low Cost, Upper Stage-Class Propulsion

NASA Technical Reports Server (NTRS)

Vickers, John

2015-01-01

The low cost, upper stage-class propulsion (LCUSP) element will develop a high strength copper alloy additive manufacturing (AM) process as well as critical components for an upper stage-class propulsion system that will be demonstrated with testing. As manufacturing technologies have matured, it now appears possible to build all the major components and subsystems of an upper stage-class rocket engine for substantially less money and much faster than traditionally done. However, several enabling technologies must be developed before that can happen. This activity will address these technologies and demonstrate the concept by designing, manufacturing, and testing the critical components of a rocket engine. The processes developed and materials' property data will be transitioned to industry upon completion of the activity. Technologies to enable the concept are AM copper alloy process development, AM post-processing finishing to minimize surface roughness, AM material deposition on existing copper alloy substrate, and materials characterization.

Incorporating development of a patient-reported outcome instrument in a clinical drug development program: examples from a heart failure program.

PubMed

Wiklund, Ingela; Anatchkova, Milena; Oko-Osi, Hafiz; von Maltzahn, Robyn; Chau, Dina; Malik, Fady I; Patrick, Donald L; Spertus, John; Teerlink, John R

2016-09-15

Patient-reported outcome (PRO) measures can be used to support label claims if they adhere to US Food & Drug Administration guidance. The process of developing a new PRO measure is expensive and time-consuming. We report the results of qualitative studies to develop new PRO measures for use in clinical trials of omecamtiv mecarbil (a selective, small molecule activator of cardiac myosin) for patients with heart failure (HF), as well as the lessons learned from the development process. Concept elicitation focus groups and individual interviews were conducted with patients with HF to identify concepts for the instrument. Cognitive interviews with HF patients were used to confirm that no essential concepts were missing and to assess patient comprehension of the instrument and items. During concept elicitation, the most frequently reported HF symptoms were shortness of breath, tiredness, fluid retention, fatigue, dizziness/light-headedness, swelling, weight fluctuation, and trouble sleeping. Two measures were developed based on the concepts: the Heart Failure Symptom Diary (HF-SD) and the Heart Failure Impact Scale (HFIS). Findings from cognitive interviews suggested that the items in the HF-SD and HFIS were relevant and well understood by patients. Multiple iterations of concept elicitation and cognitive interviews were needed based on FDA request for a broader patient population in the qualitative study. Lessons learned from the omecamtiv mecarbil PRO/clinical development program are discussed, including challenges of qualitative studies, patient recruitment, expected and actual timelines, cost, and engagement with various stakeholders. Development of a new PRO measure to support a label claim requires significant investment and early planning, as demonstrated by the omecamtiv mecarbil program.

Developing energy and momentum conceptual survey (EMCS) with four-tier diagnostic test items

NASA Astrophysics Data System (ADS)

Afif, Nur Faadhilah; Nugraha, Muhammad Gina; Samsudin, Achmad

2017-05-01

Students' conceptions of work and energy are important to support the learning process in the classroom. For that reason, a diagnostic test instrument is needed to diagnose students' conception of work and energy. As a result, the researcher decided to develop Energy and Momentum Conceptual Survey (EMCS) instrument test into four-tier test diagnostic items. The purpose of this research is organized as the first step of four-tier test-formatted EMCS development as one of diagnostic test instruments on work and Energy. The research method used the 4D model (Defining, Designing, Developing and Disseminating). The instrument developed has been tested to 39 students in one of Senior High Schools. The resulting research showed that four-tier test-formatted EMCS is able to diagnose students' conception level of work and energy concept. It can be concluded that the development of four-tier test-formatted EMCS is one of potential diagnostic test instruments that able to obtain the category of students who understand concepts, misconceptions and do not understand about Work and Energy concept at all.

Development of Rene 41 honeycomb structure as an integral cryogenic tankage/fuselage concept for future space transportation systems

NASA Technical Reports Server (NTRS)

Shideler, J. L.; Swegle, A. R.; Fields, R. A.

1982-01-01

The status of the structural development of an integral cryogenic-tankage/hot-fuselage concept for future space transportation systems is reviewed. The concept comprises a honeycomb sandwich structure that serves the combined functions of containing the cryogenic fuel, supporting the vehicle loads, and protecting the spacecraft from entry heating. The inner face sheet is exposed to cryogenic temperature of -423 F during boost; the outer face sheet, which is slotted to reduce thermal stress, is exposed to a maximum temperature of 1400 F during a high-altitude gliding entry. Attention is given to the development of a fabrication process for a Rene 41 honeycomb sandwich panel with a core density of less than 1 percent that is consistent with desirable heat treatment processes for high strength.

Development of Rene' 41 honeycomb structure as an integral cryogenic tankage/fuselage concept for future space transportation systems

NASA Technical Reports Server (NTRS)

Shideler, J. J.; Swegle, A. R.; Fields, R. A.

1982-01-01

The status of the structural development of an integral cryogenic-tankage/hot-fuselage concept for future space transportation systems (STS) is discussed. The concept consists of a honeycomb sandwich structure which serves the combined functions of containment of cryogenic fuel, support of vehicle loads, and thermal protection from an entry heating environment. The inner face sheet is exposed to a cryogenic (LH2) temperature of -423 F during boost; and the outer face sheet, which is slotted to reduce thermal stress, is exposed to a maximum temperature of 1400 F during a high altitude, gliding entry. A fabrication process for a Rene' 41 honeycomb sandwich panel with a core density less than 1 percent was developed which is consistent with desirable heat treatment processes for high strength.

Developing an Achievement Test for the Subject of Sound in Science Education

ERIC Educational Resources Information Center

Sözen, Merve; Bolat, Mualla

2016-01-01

The purpose of this study is to develop an achievement test which includes the basic concepts about the subject of sound and its properties in middle school science lessons and which at the same time aims to reveal the alternative concepts that the students already have. During the process of the development of the test, studies in the field and…

A Case Study in Master Planning the Learning Landscape Hub Concepts for the University at Buffalo

ERIC Educational Resources Information Center

Dugdale, Shirley; Torino, Roger; Felix, Elliot

2009-01-01

This case study describes concepts for three types of learning spaces that grew out of a Learning Landscape planning process. The process was part of a master plan study for the three campuses of the University at Buffalo. It involved research into user needs and aspirations about future pedagogy, development of learning space strategy,…

The Principles of Designing an Expert System in Teaching Mathematics

ERIC Educational Resources Information Center

Salekhova, Lailya; Nurgaliev, Albert; Zaripova, Rinata; Khakimullina, Nailya

2013-01-01

This study reveals general didactic concepts of the Expert Systems (ES) development process in the educational area. The proof of concept is based on the example of teaching the 8th grade Algebra subject. The main contribution in this work is the implementation of innovative approaches in analysis and processing of data by expert system as well as…

Space Experiment Concepts: Cup-Burner Flame Extinguishment

NASA Technical Reports Server (NTRS)

Takahashi, Fumiaki

2004-01-01

Space Fire Suppression Processes & Technology. Space experiment concepts of cup-burner flame extinguishment have been conceived to address to the key issues (i.e., organizing questions) in space fire suppression. Cup-burner flame extinguishment experiment can reveal physical and chemical suppression processes and provide agent effectiveness data useful for technology development of space fire suppression systems in various reduced-gravity platforms.

[Biosafety provision on handling pathogenic biological agents on the concept of biorisk assessment and management].

PubMed

Dobrokhotskiĭ, O N; Kolombet, L V

2010-01-01

The paper shows it urgent to realize the concept of biological risk assessment and management on handling pathogenic biological agents (PBA). It gives a number of objective reasons that impede development of a methodology to assess laboratory biological risks. A concept of continuous improvement (a process approach) is proposed for use as a biorisk management tool for biosafety assurance when handling PBA. It is demonstrated that development of international cooperation urgently requires that national concepts and standards be harmonized with international regulatory documents on biosafety assurance on handling PBA.

Concepts and challenges in quantitative pharmacology and model-based drug development.

PubMed

Zhang, Liping; Pfister, Marc; Meibohm, Bernd

2008-12-01

Model-based drug development (MBDD) has been recognized as a concept to improve the efficiency of drug development. The acceptance of MBDD from regulatory agencies, industry, and academia has been growing, yet today's drug development practice is still distinctly distant from MBDD. This manuscript is aimed at clarifying the concept of MBDD and proposing practical approaches for implementing MBDD in the pharmaceutical industry. The following concepts are defined and distinguished: PK-PD modeling, exposure-response modeling, pharmacometrics, quantitative pharmacology, and MBDD. MBDD is viewed as a paradigm and a mindset in which models constitute the instruments and aims of drug development efforts. MBDD covers the whole spectrum of the drug development process instead of being limited to a certain type of modeling technique or application area. The implementation of MBDD requires pharmaceutical companies to foster innovation and make changes at three levels: (1) to establish mindsets that are willing to get acquainted with MBDD, (2) to align processes that are adaptive to the requirements of MBDD, and (3) to create a closely collaborating organization in which all members play a role in MBDD. Pharmaceutical companies that are able to embrace the changes MBDD poses will likely be able to improve their success rate in drug development, and the beneficiaries will ultimately be the patients in need.

The Community Development Process: The Rediscovery of Local Initiative.

ERIC Educational Resources Information Center

Biddle, William W.; Biddle, Loureide J.

The development process in two communities, a mining county in rural Appalachia and a deteriorating neighborhood in a northern industrial city, is presented in case-study form. Concepts and commonly used terms are defined; a process of development is identified that can be used in groups small enough to permit attention to the growth of persons.…

Microscopic Virtual Media (MVM) in Physics Learning: Case Study on Students Understanding of Heat Transfer

NASA Astrophysics Data System (ADS)

Wibowo, F. C.; Suhandi, A.; Rusdiana, D.; Darman, D. R.; Ruhiat, Y.; Denny, Y. R.; Suherman; Fatah, A.

2016-08-01

A Study area in physics learning is purposeful on the effects of various types of learning interventions to help students construct the basic of scientific conception about physics. Microscopic Virtual Media (MVM) are applications for physics learning to support powerful modelling microscopic involving physics concepts and processes. In this study groups (experimental) of 18±20 years old, students were studied to determine the role of MVM in the development of functional understanding of the concepts of thermal expansion in heat transfer. The experimental group used MVM in learning process. The results show that students who learned with virtual media exhibited significantly higher scores in the research tasks. Our findings proved that the MVM may be used as an alternative instructional tool, in order to help students to confront and constructed their basic of scientific conception and developed their understanding.

Feasibility of Supersonic Aircraft Concepts for Low-Boom and Flight Trim Constraints

NASA Technical Reports Server (NTRS)

Li, Wu

2015-01-01

This paper documents a process for analyzing whether a particular supersonic aircraft configuration layout and a given cruise condition are feasible to achieve a trimmed low-boom design. This process was motivated by the need to know whether a particular configuration at a given cruise condition could be reshaped to satisfy both low-boom and flight trim constraints. Without such a process, much effort could be wasted on shaping a configuration layout at a cruise condition that could never satisfy both low-boom and flight trim constraints simultaneously. The process helps to exclude infeasible configuration layouts with minimum effort and allows a designer to develop trimmed low-boom concepts more effectively. A notional low-boom supersonic demonstrator concept is used to illustrate the analysis/design process.

Use of consumer insight in the new product development process in the meat sector.

PubMed

Grunert, Klaus G; Verbeke, Wim; Kügler, Jens O; Saeed, Faiza; Scholderer, Joachim

2011-11-01

Successful new product development requires input from the market throughout the product development process, from identification of opportunities via screening of ideas, development of concepts, development of physical prototypes and to launch. Drawing on work done in the EU FP6 projects PROSAFEBEEF and Q-PORKCHAINS and a Danish project, all dealing with new product development in the meat sector, it is shown how the use of consumer insight techniques can a) support the identification of market opportunities, b) make sure that technologies applied are acceptable to consumers, c) aid the selection and optimisation of new product concepts and related communication, and d) be used to test product prototypes before final launch. Copyright © 2011 Elsevier Ltd. All rights reserved.

ATAC Process Proof of Concept Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bri Rolston; Sarah Freeman

Researchers at INL with funding from the Department of Energy’s Office of Electricity Delivery and Energy Reliability (DOE-OE) evaluated a novel approach for near real-time consumption of threat intelligence. Demonstration testing in an industry environment supported the development of this new process to assist the electric sector in securing their critical networks. This report provides the reader with an understanding of the methods used during this proof of concept project. The processes and templates were further advanced with an industry partner during an onsite assessment. This report concludes with lessons learned and a roadmap for final development of these materialsmore » for use by industry.« less

Strategic planning for the International Space Station

NASA Technical Reports Server (NTRS)

Griner, Carolyn S.

1990-01-01

The concept for utilization and operations planning for the International Space Station Freedom was developed in a NASA Space Station Operations Task Force in 1986. Since that time the concept has been further refined to definitize the process and products required to integrate the needs of the international user community with the operational capabilities of the Station in its evolving configuration. The keystone to the process is the development of individual plans by the partners, with the parameters and formats common to the degree that electronic communications techniques can be effectively utilized, while maintaining the proper level and location of configuration control. The integration, evaluation, and verification of the integrated plan, called the Consolidated Operations and Utilization Plan (COUP), is being tested in a multilateral environment to prove out the parameters, interfaces, and process details necessary to produce the first COUP for Space Station in 1991. This paper will describe the concept, process, and the status of the multilateral test case.

Exploring psychosocial task resolution and self-concept among African-American adolescents.

PubMed

Brookins, C C

1996-06-01

Developmental task resolution and self-concept of adolescents were examined for a sample of 110 African-American youth. The Erikson Psychosocial Stage Inventory was used to measure Erikson's stages of psychological development and the Bronstein-Cruz Child/Adolescent Self-concept and Adjustment Scale was used to measure multiple components of the self-concept. Scores for Self-concept and Resolution of Identity stages were highly correlated although scores on Resolution of Identity, commonly seen as the primary psychosocial task of adolescence, were not related to scores on either Emotional Well-being or Family Relations. The results are discussed in terms of improving understanding of relationships between processes in development, identity, and other salient psychosocial variables.

[Potential of cooperative learning in project development : Relevance of cooperative participation procedure for the further development of generation-appropriate accomodation in structurally weak rural areas].

PubMed

Kaufmann, Gerd; Frankenberg, Olga; Sommer, Ralf-Rüdiger; Jost, Annemarie

2017-04-01

A joint initiative of existing senior care organizations, the municipality of Meyenburg and the state of Brandenburg was further developed by affiliation of an institute of the Brandenburg University of Technology Cottbus-Senftenberg (ABV) in cooperation with members of the architecture and social work departments in 2014. A cooperative process between different players was central to create an appropriate structure of services for this region. Cooperative projects are necessary to establish new forms of generation-appropriate living and care concepts in rural areas. Cooperative learning methods are needed to develop new forms of generation-appropriate living and care concepts in rural areas, which take the diversity of elderly people, the rural context, intergenerational residential arrangements and affordable accommodation that meets the requirements of the social security system into account. Furthermore, the project had to reflect the recent developments of the German care insurance. The article describes the participatory methods, the coordination process and the resulting concept.

Development of the Neuron Assessment for Measuring Biology Students’ Use of Experimental Design Concepts and Representations

PubMed Central

Dasgupta, Annwesa P.; Anderson, Trevor R.; Pelaez, Nancy J.

2016-01-01

Researchers, instructors, and funding bodies in biology education are unanimous about the importance of developing students’ competence in experimental design. Despite this, only limited measures are available for assessing such competence development, especially in the areas of molecular and cellular biology. Also, existing assessments do not measure how well students use standard symbolism to visualize biological experiments. We propose an assessment-design process that 1) provides background knowledge and questions for developers of new “experimentation assessments,” 2) elicits practices of representing experiments with conventional symbol systems, 3) determines how well the assessment reveals expert knowledge, and 4) determines how well the instrument exposes student knowledge and difficulties. To illustrate this process, we developed the Neuron Assessment and coded responses from a scientist and four undergraduate students using the Rubric for Experimental Design and the Concept-Reasoning Mode of representation (CRM) model. Some students demonstrated sound knowledge of concepts and representations. Other students demonstrated difficulty with depicting treatment and control group data or variability in experimental outcomes. Our process, which incorporates an authentic research situation that discriminates levels of visualization and experimentation abilities, shows potential for informing assessment design in other disciplines. PMID:27146159

Microwave vision for robots

NASA Technical Reports Server (NTRS)

Lewandowski, Leon; Struckman, Keith

1994-01-01

Microwave Vision (MV), a concept originally developed in 1985, could play a significant role in the solution to robotic vision problems. Originally our Microwave Vision concept was based on a pattern matching approach employing computer based stored replica correlation processing. Artificial Neural Network (ANN) processor technology offers an attractive alternative to the correlation processing approach, namely the ability to learn and to adapt to changing environments. This paper describes the Microwave Vision concept, some initial ANN-MV experiments, and the design of an ANN-MV system that has led to a second patent disclosure in the robotic vision field.

Educating for Moral Ability: Reflections on Moral Development Based on Vygotsky's Theory of Concept Formation.

ERIC Educational Resources Information Center

Crawford, Paul Duncan

2001-01-01

Examines the idea that the development of moral ability shares similarities with Lev Vygotsky's theory of concept formation. Argues that understanding moral ability as a present-centered aptitude for creating meaning is significant for educators. Concludes it is useful for understanding the learning process to think and act in the present. (CAJ)

The Process of Collaborative Concept Mapping in Kindergarten and the Effect on Critical Thinking Skills

ERIC Educational Resources Information Center

Sundararajan, NarayanKripa; Adesope, Olusola; Cavagnetto, Andy

2017-01-01

To develop and nurture critical thinking, students must have opportunities to observe and practice critical thinking in the classroom. In this parallel mixed method classroom study, we investigate the role of collaborative concept mapping in the development of kindergarten learners' critical thinking skills of analysis and interpretation over a…

The Concept of Competence in the Development of Vocational Education and Training in Selected EU Member States

ERIC Educational Resources Information Center

Weigel, Tanja; Mulder, Martin; Collins, Kate

2007-01-01

This contribution reviews how four European countries--England, Germany, France and the Netherlands--use the concept of competence in the process of developing vocational education and training. Competence in England is set in the context of the National Vocational Qualifications; in Germany within action competence and the approach to learning…

Comparison of Designer's Design Thinking Modes in Digital and Traditional Sketches

ERIC Educational Resources Information Center

Wu, Jun-Chieh; Chen, Cheng-Chi; Chen, Hsin-Chia

2012-01-01

The internal design thinking behaviour of designers in the concept development has been an important issue of cognitive psychology. In this study, the design thinking process designers have in applying digital media and traditional paper in the early concept development stage was explored. Special focus was made on the structure and procedure of…

Information Processing Theory and Conceptual Development.

ERIC Educational Resources Information Center

Schroder, H. M.

An educational program based upon information processing theory has been developed at Southern Illinois University. The integrating theme was the development of conceptual ability for coping with social and personal problems. It utilized student information search and concept formation as foundations for discussion and judgment and was organized…

Using Concept Mapping as as Tool for Program Theory Development

ERIC Educational Resources Information Center

Orsi, Rebecca

2011-01-01

The purpose of this methodological study is to explore how well a process called "concept mapping" (Trochim, 1989) can articulate the theory which underlies a social program. Articulation of a program's theory is a key step in completing a sound theory based evaluation (Weiss, 1997a). In this study, concept mapping is used to…

Biological Embedding: Evaluation and Analysis of an Emerging Concept for Nursing Scholarship

PubMed Central

Nist, Marliese Dion

2016-01-01

Aim The purpose of this paper is to report the analysis of the concept of biological embedding. Background Research that incorporates a life course perspective is becoming increasingly prominent in the health sciences. Biological embedding is a central concept in life course theory and may be important for nursing theories to enhance our understanding of health states in individuals and populations. Before the concept of biological embedding can be used in nursing theory and research, an analysis of the concept is required to advance it toward full maturity. Design Concept analysis. Data Sources PubMed, CINAHL and PsycINFO were searched for publications using the term ‘biological embedding’ or ‘biological programming’ and published through 2015. Methods An evaluation of the concept was first conducted to determine the concept’s level of maturity and was followed by a concept comparison, using the methods for concept evaluation and comparison described by Morse. Results A consistent definition of biological embedding – the process by which early life experience alters biological processes to affect adult health outcomes – was found throughout the literature. The concept has been used in several theories that describe the mechanisms through which biological embedding might occur and highlight its role in the development of health trajectories. Biological embedding is a partially mature concept, requiring concept comparison with an overlapping concept – biological programming – to more clearly establish the boundaries of biological embedding. Conclusions Biological embedding has significant potential for theory development and application in multiple academic disciplines, including nursing. PMID:27682606

Development of an automated ammunition processing system for battlefield use

DOE Office of Scientific and Technical Information (OSTI.GOV)

Speaks, D.M.; Chesser, J.B.; Lloyd, P.D.

1995-03-01

The Future Armored Resupply Vehicle (FARV) will be the companion ammunition resupply vehicle to the Advanced Field Artillery System (AFAS). These systems are currently being investigated by the US Army for future acquisition. The FARV will sustain the AFAS with ammunition and fuel and will significantly increase capabilities over current resupply vehicles. Currently ammunition is transferred to field artillery almost entirely by hand. The level of automation to be included into the FARV is still under consideration. At the request of the US Army`s Project Manager, AFAS/FARV, Oak Ridge National Laboratory (ORNL) identified and evaluated various concepts for the automatedmore » upload, processing, storage, and delivery equipment for the FARV. ORNL, working with the sponsor, established basic requirements and assumptions for concept development and the methodology for concept selection. A preliminary concept has been selected, and the associated critical technologies have been identified. ORNL has provided technology demonstrations of many of these critical technologies. A technology demonstrator which incorporates all individual components into a total process demonstration is planned for late FY 1995.« less

Commercial space opportunities - Advanced concepts and technology overview

NASA Technical Reports Server (NTRS)

Reck, Gregory M.

1993-01-01

The paper discusses the status of current and future commercial space opportunities. The goal is to pioneer innovative, customer-focused space concepts and technologies, leveraged through industrial, academic, and government alliance, to ensure U.S. commercial competitiveness and preeminence in space. The strategy is to develop technologies which enable new products and processes, deploy existing technology into commercial and military products and processes, and integrate military and commercial research and production activities. Technology development areas include information infrastructure, electronics design and manufacture, health care technology, environment technology, and aeronautical technologies.

Novel large deployable antenna backing structure concepts for foldable reflectors

NASA Astrophysics Data System (ADS)

Fraux, V.; Lawton, M.; Reveles, J. R.; You, Z.

2013-12-01

This paper describes a number of large deployable antenna (LDA) reflector structure concepts developed at EnerSys-ABSL. Furthermore, EnerSys-ABSL has confirmed the desire to build a breadboard demonstrator of a backing deployable structure for a foldable reflector in the diameter range of 4-9 m. As part of this project EnerSys-ABSL has explored five novel deployable structure concepts. This paper presents the top level definition of these concepts together with the requirements considered in the design and selection of the preferred candidate. These new concepts are described and then compared through a trade-off analysis to identify the most suitable concept that EnerSys-ABSL would like to consider for the breadboard demonstrator. Finally, the kinematics of the chosen concept is described in more detail and future steps in the development process are highlighted.

Developing Mathematical Processes (DMP). Field Test Evaluation, 1973-1974.

ERIC Educational Resources Information Center

Schall, William; And Others

The Developing Mathematical Processes (DMP) program was field-tested in the kindergarten and first three grades of one parochial and five public schools. DMP is an activity-based program developed around a comprehensive list of behavioral objectives. The program is concerned with the development of intuitive geometric concepts as well as…

Development and History of the Concept of PPB.

ERIC Educational Resources Information Center

Keller, Harry

Program budgeting is an extension and refinement of budgeting processes developed during the last half century. The purpose of this paper is to investigate the theory, philosophy, and techniques of this new process, and to develop a conceptual framework for its use. An account of the historical development of Planning Programming Budgeting Systems…

Crew interface specifications preparation for in-flight maintenance and stowage functions

NASA Technical Reports Server (NTRS)

Parker, F. W.; Carlton, B. E.

1972-01-01

The findings and data products developed during the Phase 2 crew interface specification study are presented. Five new NASA general specifications were prepared: operations location coding system for crew interfaces; loose equipment and stowage management requirements; loose equipment and stowage data base information requirements; spacecraft loose equipment stowage drawing requirements; and inflight stowage management data requirements. Additional data was developed defining inflight maintenance processes and related data concepts for inflight troubleshooting, remove/repair/replace and scheduled maintenance activities. The process of maintenance task and equipment definition during spacecraft design and development was also defined and related data concepts were identified for futher development into formal NASA specifications during future follow-on study phases of the contract.

An Interactive Design Space Supporting Development of Vehicle Architecture Concept Models

DTIC Science & Technology

2011-01-01

Denver, Colorado, USA IMECE2011-64510 AN INTERACTIVE DESIGN SPACE SUPPORTING DEVELOPMENT OF VEHICLE ARCHITECTURE CONCEPT MODELS Gary Osborne...early in the development cycle. Optimization taking place later in the cycle usually occurs at the detail design level, and tends to result in...architecture changes may be imposed, but such modifications are equivalent to a huge optimization cycle covering almost the entire design process, and

Realist Ontology and Natural Processes: A Semantic Tool to Analyze the Presentation of the Osmosis Concept in Science Texts

ERIC Educational Resources Information Center

Spinelli Barria, Michele; Morales, Cecilia; Merino, Cristian; Quiroz, Waldo

2016-01-01

In this work, we developed an ontological tool, based on the scientific realism of Mario Bunge, for the analysis of the presentation of natural processes in science textbooks. This tool was applied to analyze the presentation of the concept of osmosis in 16 chemistry and biology books at different educational levels. The results showed that more…

Perimeter security for Minnesota correctional facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crist, D.; Spencer, D.D.

1996-12-31

For the past few years, the Minnesota Department of Corrections, assisted by Sandia National Laboratories, has developed a set of standards for perimeter security at medium, close, and maximum custody correctional facilities in the state. During this process, the threat to perimeter security was examined and concepts about correctional perimeter security were developed. This presentation and paper will review the outcomes of this effort, some of the lessons learned, and the concepts developed during this process and in the course of working with architects, engineers and construction firms as the state upgraded perimeter security at some facilities and planned newmore » construction at other facilities.« less

NASA KSC/AFRL Reusable Booster System (RBS) Concept of Operations (ConOps)

NASA Technical Reports Server (NTRS)

Zeno, Dnany; Mosteller, Ted; McCleskey, Carey; Jhnson, Robert; Hopkins, Jason; Miller, Thomas

2010-01-01

This slide presentation reviews the study and findings of the study on the Concept of Operations (ConOps) for Reusable Booster System (RBS) centering on rapid turnaround and launch of a two-stage partially reusable payload delivery system (i.e., 8 hours between launches). The study was to develop rapid ground processing (aircraft like concepts) and identify areas for follow-on study, technology needs, and proof-of-concept demonstrations.

Teacher Professional Development for TPACK-21CL: Effects on Teacher ICT Integration and Student Outcomes

ERIC Educational Resources Information Center

Koh, Joyce Hwee Ling; Chai, Ching Sing; Lim, Wei Ying

2017-01-01

This article explicates the conception and evaluation of an information and communications technologies (ICT) professional development process for developing teachers' technological pedagogical content knowledge for 21st century learning. The process emphasizes teachers' prolonged engagement with peers and researchers in design teams. Supported by…

A Analysis of the Development of Weather Concepts

NASA Astrophysics Data System (ADS)

Mroz, Paul John

Weather information in all forms is poorly understood and often misinterpreted by the general public. Weather literacy is necessary for everyone if critical weather messages, designed to save lives and protect property, are to be effective. The purpose of this study was to seek content and causal evidence for a developmental concept of Weather Information Processing that was consistent with Piagetian Cognitive Stages of Development. Three ordinal Content Stages Of Weather Information Processing (phenomena, process and mechanism) and three ordinal Causal Explanation Stages Of Weather Information Processing (non-real, natural, and scientifically valid abstract ideas) were explored for their relationship with Piaget's Pre-Operational, Concrete and Formal Stages of Development. One hundred and fifty -five elementary and secondary school students from two school districts were administered a written Piagetian exam. Commonly available television weather programs were categorized, randomly assigned and viewed by 42 randomly selected students who were administered three Piagetian tasks. Students were clinically interviewed for the level of content information and causal explanations (reasoning). Results indicated that content information and causal reasoning of students to televised weather information is significantly related (p <.01) to age, and Piagetian Cognitive Stages of Development. Two Piagetian logic operations (seriation and correlation) were established as significantly different (p <.05) when related to age. These findings support a developmental concept of Weather Information Processing and have implications for teaching and presenting weather information to the public.

Information systems: Characteristics of an IIoT concept implementation at a fish processing enterprise

NASA Astrophysics Data System (ADS)

Votinov, M. V.; Ershov, M. A.

2018-05-01

This research focuses on relevant questions of the Industrial Internet of Things (IIoT) concept development and implementation at the enterprise. Lately IIoT has been widely publicized as a part of Industry 4.0. In this article the features of the information system development are presented, including SOA telecommunications that allow the remote access and control of the ongoing technological process with mobile devices. The capacity of the developed system is shown. The realization of the data exchange between developed telecommunications is highlighted. The practice of using the telecommunications, developed within the IIoT, has shown positive results and become the basics of implementation of an integrated information system that would link the other enterprise's objects.

A model for process representation and synthesis. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Thomas, R. H.

1971-01-01

The problem of representing groups of loosely connected processes is investigated, and a model for process representation useful for synthesizing complex patterns of process behavior is developed. There are three parts, the first part isolates the concepts which form the basis for the process representation model by focusing on questions such as: What is a process; What is an event; Should one process be able to restrict the capabilities of another? The second part develops a model for process representation which captures the concepts and intuitions developed in the first part. The model presented is able to describe both the internal structure of individual processes and the interface structure between interacting processes. Much of the model's descriptive power derives from its use of the notion of process state as a vehicle for relating the internal and external aspects of process behavior. The third part demonstrates by example that the model for process representation is a useful one for synthesizing process behavior patterns. In it the model is used to define a variety of interesting process behavior patterns. The dissertation closes by suggesting how the model could be used as a semantic base for a very potent language extension facility.

Technical Interchange Meeting Guidelines Breakout

NASA Technical Reports Server (NTRS)

Fong, Rob

2002-01-01

Along with concept developers, the Systems Evaluation and Assessment (SEA) sub-element of VAMS will develop those scenarios and metrics required for testing the new concepts that reside within the System-Level Integrated Concepts (SLIC) sub-element in the VAMS project. These concepts will come from the NRA process, space act agreements, a university group, and other NASA researchers. The emphasis of those concepts is to increase capacity while at least maintaining the current safety level. The concept providers will initially develop their own scenarios and metrics for self-evaluation. In about a year, the SEA sub-element will become responsible for conducting initial evaluations of the concepts using a common scenario and metric set. This set may derive many components from the scenarios and metrics used by the concept providers. Ultimately, the common scenario\\metric set will be used to help determine the most feasible and beneficial concepts. A set of 15 questions and issues, discussed below, pertaining to the scenario and metric set, and its use for assessing concepts, was submitted by the SEA sub-element for consideration during the breakout session. The questions were divided among the three breakout groups. Each breakout group deliberated on its set of questions and provided a report on its discussion.

The Development of Stacked Core Technology for the Fabrication of Deep Lightweight UV-quality Space Mirrors

NASA Technical Reports Server (NTRS)

Matthews, Gary W.; Kirk, Charles S.; Maffett, Steven P.; Abplanalp, Calvin E.; Stahl, H. Philip; Effinger, Michael R.

2013-01-01

The Decadal Survey stated that an advanced large-aperture ultraviolet, optical, near-infrared (UVOIR) telescope is required to enable the next generation of compelling astrophysics and exoplanet science; and, that present technology is not mature enough to affordably build and launch any potential UVOIR mission concept. Under Science and Technology funding, NASA's Marshall Space Flight Center (MSFC) and Exelis have developed a more cost effective process to make up to 4m monolithic spaceflight UV quality, low areal density, thermally and dynamically stable primary mirrors. A proof of concept mirror was completed at Exelis and tested down to 250K at MSFC which would allow imaging out to 2.5 microns. The parameters and test results of this concept mirror will be shown. The scale-up process will be discussed and the technology development path to a 4m mirror system by 2018 will also be outlined.

Development of Stacked Core Technology for the Fabrication of Deep Lightweight UV Quality Space Mirrors

NASA Technical Reports Server (NTRS)

Matthews, Gary; Kirk, Charlie; Maffett, Steve; Abplanalp, Cal; Stahl, H. Philip

2013-01-01

Decadal Survey stated that an advanced large-aperture ultraviolet, optical, near-infrared (UVOIR) telescope is required to enable the next generation of compelling astrophysics and exoplanet science; and, that present technology is not mature enough to affordably build and launch any potential UVOIR mission concept. Under Science and Technology funding, NASA's Marshall Space Flight Center (MSFC) and ITT Exelis have developed a more cost effective process to make up to 4m monolithic spaceflight UV quality, low areal density, thermally and dynamically stable primary mirrors. A proof of concept mirror was completed at ITT Exelis and tested down to 250K at MSFC which would allow imaging out to 2.5 microns. The parameters and test results of this concept mirror will be shown. The scale-up process will be discussed and the technology development path to a 4m mirror system by 2018 will also be outlined.

Automated ammunition logistics for the Crusader program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Speaks, D.M.; Kring, C.T.; Lloyd, P.D.

1997-03-01

The US Army`s next generation artillery system is called the Crusader. A self-propelled howitzer and a resupply vehicle constitute the Crusader system, which will be designed for improved mobility, increased firepower, and greater survivability than current generation vehicles. The Army`s Project Manager, Crusader, gave Oak Ridge National Laboratory (ORNL) the task of developing and demonstrating a concept for the resupply vehicle. The resupply vehicle is intended to sustain the howitzer with ammunition and fuel and will significantly increase capabilities over those of current resupply vehicles. Ammunition is currently processed and transferred almost entirely by hand. ORNL identified and evaluated variousmore » concepts for automated upload, processing, storage, docking and delivery. Each of the critical technologies was then developed separately and demonstrated on discrete test platforms. An integrated technology demonstrator, incorporating each of the individual technology components to realistically simulate performance of the selected vehicle concept, was developed and successfully demonstrated for the Army.« less

[Social companies and solidary economy: perspectives for the work inclusion of individuals with mental disorders].

PubMed

Lussi, Isabela Aparecida de Oliveira; Pereira, Maria Alice Ornellas

2011-04-01

The psychiatric reform process requires the implementation of public policies that guarantee the work inclusion of individuals with mental disorders. To do this, work must be understood as a promoter of autonomy, emancipation and citizenship. The objective of this study is to reflect on the theoretical concepts related to social insertion through work, with the purpose of exploring the inclusion of individuals with mental disorders in the work market. The concepts social company and solidary economy where selected as fundamental for the study. In the social company, the subject is considered to be a social being, focusing on the development process towards emancipation. In solidary economy, the objective is to develop an economy that is more just, equal and solidary. Further discussions on these concepts should be developed to support the implementation of projects for social inclusion through work.

Removing Sulphur Dioxide From Stack Gases

ERIC Educational Resources Information Center

Slack, A. V.

1973-01-01

Process types, process concepts, claims and counterclaims, cost factors, and the level of developed technology for sulfur dioxide control in stack gases are focused upon and evaluated. Wet and dry processes as well as recovery and throwaway processes are compared. (BL)

A model for the distributed storage and processing of large arrays

NASA Technical Reports Server (NTRS)

Mehrota, P.; Pratt, T. W.

1983-01-01

A conceptual model for parallel computations on large arrays is developed. The model provides a set of language concepts appropriate for processing arrays which are generally too large to fit in the primary memories of a multiprocessor system. The semantic model is used to represent arrays on a concurrent architecture in such a way that the performance realities inherent in the distributed storage and processing can be adequately represented. An implementation of the large array concept as an Ada package is also described.

Soft sensor for monitoring biomass subpopulations in mammalian cell culture processes.

PubMed

Kroll, Paul; Stelzer, Ines V; Herwig, Christoph

2017-11-01

Biomass subpopulations in mammalian cell culture processes cause impurities and influence productivity, which requires this critical process parameter to be monitored in real-time. For this reason, a novel soft sensor concept for estimating viable, dead and lysed cell concentration was developed, based on the robust and cheap in situ measurements of permittivity and turbidity in combination with a simple model. It could be shown that the turbidity measurements contain information about all investigated biomass subpopulations. The novelty of the developed soft sensor is the real-time estimation of lysed cell concentration, which is directly correlated to process-related impurities such as DNA and host cell protein in the supernatant. Based on data generated by two fed-batch processes the developed soft sensor is described and discussed. The presented soft sensor concept provides a tool for viable, dead and lysed cell concentration estimation in real-time with adequate accuracy and enables further applications with respect to process optimization and control.

Roundhouse Diagrams.

ERIC Educational Resources Information Center

Ward, Robin E.; Wandersee, James

2000-01-01

Students must understand key concepts through reasoning, searching out related concepts, and making connections within multiple systems to learn science. The Roundhouse diagram was developed to be a concise, holistic, graphic representation of a science topic, process, or activity. Includes sample Roundhouse diagrams, a diagram checklist, and…

48 CFR 34.005-1 - Competition.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., throughout the acquisition process, promote full and open competition and sustain effective competition between alternative major system concepts and sources, as long as it is economically beneficial and... officer should time solicitation issuance and contract award to maintain continuity of concept development...

Identification of threshold concepts for biochemistry.

PubMed

Loertscher, Jennifer; Green, David; Lewis, Jennifer E; Lin, Sara; Minderhout, Vicky

2014-01-01

Threshold concepts (TCs) are concepts that, when mastered, represent a transformed understanding of a discipline without which the learner cannot progress. We have undertaken a process involving more than 75 faculty members and 50 undergraduate students to identify a working list of TCs for biochemistry. The process of identifying TCs for biochemistry was modeled on extensive work related to TCs across a range of disciplines and included faculty workshops and student interviews. Using an iterative process, we prioritized five concepts on which to focus future development of instructional materials. Broadly defined, the concepts are steady state, biochemical pathway dynamics and regulation, the physical basis of interactions, thermodynamics of macromolecular structure formation, and free energy. The working list presented here is not intended to be exhaustive, but rather is meant to identify a subset of TCs for biochemistry for which instructional and assessment tools for undergraduate biochemistry will be developed. © 2014 J. Loertscher et al. CBE—Life Sciences Education © 2014 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

A service concept and tools to improve maternal and newborn health in Nigeria and Uganda.

PubMed

Salgado, Mariana; Wendland, Melanie; Rodriguez, Damaris; Bohren, Meghan A; Oladapo, Olufemi T; Ojelade, Olubunmi A; Mugerwa, Kidza; Fawole, Bukola

2017-12-01

The "Better Outcomes in Labor Difficulty" (BOLD) project used a service design process to design a set of tools to improve quality of care during childbirth by strengthening linkages between communities and health facilities in Nigeria and Uganda. This paper describes the Passport to Safer Birth concept and the tools developed as a result. Service design methods were used to identify facilitators and barriers to quality care, and to develop human-centered solutions. The service design process had three phases: Research for Design, Concept Design, and Detail Design, undertaken in eight hospitals and catchment communities. The service concept "Better Beginnings" comprises three tools. The "Pregnancy Purse" provides educational information to women throughout pregnancy. The "Birth Board" is a visual communication tool that presents the labor and childbirth process. The "Family Pass" is a set of wearable passes for the woman and her supporter to facilitate communication of care preferences. The Better Beginnings service concept and tools form the basis for the promotion of access to information and knowledge acquisition, and could improve communication between the healthcare provider, the woman, and her family during childbirth. © 2017 International Federation of Gynecology and Obstetrics. The World Health Organization retains copyright and all other rights in the manuscript of this article as submitted for publication.

Contextual Processing of Abstract Concepts Reveals Neural Representations of Non-Linguistic Semantic Content

PubMed Central

Wilson-Mendenhall, Christine D.; Simmons, W. Kyle; Martin, Alex; Barsalou, Lawrence W.

2014-01-01

Concepts develop for many aspects of experience, including abstract internal states and abstract social activities that do not refer to concrete entities in the world. The current study assessed the hypothesis that, like concrete concepts, distributed neural patterns of relevant, non-linguistic semantic content represent the meanings of abstract concepts. In a novel neuroimaging paradigm, participants processed two abstract concepts (convince, arithmetic) and two concrete concepts (rolling, red) deeply and repeatedly during a concept-scene matching task that grounded each concept in typical contexts. Using a catch trial design, neural activity associated with each concept word was separated from neural activity associated with subsequent visual scenes to assess activations underlying the detailed semantics of each concept. We predicted that brain regions underlying mentalizing and social cognition (e.g., medial prefrontal cortex, superior temporal sulcus) would become active to represent semantic content central to convince, whereas brain regions underlying numerical cognition (e.g., bilateral intraparietal sulcus) would become active to represent semantic content central to arithmetic. The results supported these predictions, suggesting that the meanings of abstract concepts arise from distributed neural systems that represent concept-specific content. PMID:23363408

Further developments of the concept of fantasy.

PubMed

Giustino, Gabriella

2017-06-01

After the Isaacs' seminal work on the nature and function of unconscious phantasy (1948), several authors (mostly in the British Society) have reflected on the topic and tried to extend the concept of fantasy. In this paper I shall examine the contributions of Winnicott, Gaddini, Joseph and Anne Marie Sandler that aim at broadening this psychoanalytic concept. The authors that I have considered share a focus mostly on the early stages of child development. Both Winnicott and Gaddini belong to a line of thinking that explores the vicissitudes of the primary emotional development of the infantile self (in the mother-infant relationship) involving the earliest processes of holding and bodily and kinaesthetic fantasy that form the bodily integrity of the person. The Sandlers focused mostly on the concept of the past unconscious understood as a place of primitive vicissitudes with a deficit in figuration where the process of repression is missing. The present unconscious phantasy (that is located in the here and now) has the function of rendering the past unconscious phantasy partly accessible; otherwise it would remain unknowable. Copyright © 2016 Institute of Psychoanalysis.

Use of Concept Profile Analysis to Identify Difficulties in Solving Science Problems.

ERIC Educational Resources Information Center

Gorodetsky, Malka; Hoz, Ron

1980-01-01

Proposed is a new method for analyzing how concepts are used in the process of problem solving in science. Through the use of a "thinking aloud" interview technique, 21 tenth-grade students worked with a problem concerning the boiling point of water at the Dead Sea. Interview protocols were analyzed to develop students' concept profiles.…

Analytical Concept: Development of a Multinational Information Strategy

DTIC Science & Technology

2008-10-31

16 1.4.3 Training and Mentoring/ Coaching ............................................................. 16 1.5 Analysis Requirements...America. These priority focus areas will become subject to experimentation in a number of consecutive phases of the 2008 Major Integrating Event ( MIE ...factor in general, in the MNE 5 CD&E program, focused on supporting concept validation in the 2008 MIE . The Analytical Concept outlines processes and

On the Roots of Difficulties in Learning about Cell Division: Process-Based Analysis of Students' Conceptual Development in Teaching Experiments

ERIC Educational Resources Information Center

Riemeier, Tanja; Gropengiesser, Harald

2008-01-01

Empirical investigations on students' conceptions of cell biology indicate major misunderstandings of scientific concepts even after thorough teaching. Therefore, the main aim of our research project was to investigate students' difficulties in learning this topic and to study the impact of learning activities on students' conceptions. Using the…

What Are the Roles that Children's Drawings Play in Inquiry of Science Concepts?

ERIC Educational Resources Information Center

Chang, Ni

2012-01-01

This study was designed to identify the roles that drawing played in the process of children's acquisition of science concepts. Seventy pre-service teachers through four semesters from a Midwest University in the USA developed lesson plans on science concepts and then taught them to 70 young children ages 4-7, respectively. This experience was…

Concept Mapping as an Approach to Facilitate Participatory Intervention Building.

PubMed

L Allen, Michele; Schaleben-Boateng, Dane; Davey, Cynthia S; Hang, Mikow; Pergament, Shannon

2015-01-01

A challenge to addressing community-defined need through community-based participatory intervention building is ensuring that all collaborators' opinions are represented. Concept mapping integrates perspectives of individuals with differing experiences, interests, or expertise into a common visually depicted framework, and ranks composite views on importance and feasibility. To describe the use of concept mapping to facilitate participatory intervention building for a school-based, teacher-focused, positive youth development (PYD) promotion program for Latino, Hmong, and Somali youth. Particiants were teachers, administrators, youth, parents, youth workers, and community and university researchers on the projects' community collaborative board. We incorporated previously collected qualitative data into the process. In a mixed-methods process we 1) generated statements based on key informant interview and focus group data from youth workers, teachers, parents, and youth in multiple languages regarding ways teachers promote PYD for Somali, Latino and Hmong youth; 2) guided participants to individually sort statements into meaningful groupings and rate them by importance and feasibility; 3) mapped the statements based on their relation to each other using multivariate statistical analyses to identify concepts, and as a group identified labels for each concept; and 4) used labels and statement ratings to identify feasible and important concepts as priorities for intervention development. We identified 12 concepts related to PYD promotion in schools and prioritized 8 for intervention development. Concept mapping facilitated participatory intervention building by formally representing all participants' opinions, generating visual representation of group thinking, and supporting priority setting. Use of prior qualitative work increased the diversity of viewpoints represented.

Holistic Nursing Simulation: A Concept Analysis.

PubMed

Cohen, Bonni S; Boni, Rebecca

2018-03-01

Simulation as a technology and holistic nursing care as a philosophy are two components within nursing programs that have merged during the process of knowledge and skill acquisition in the care of the patients as whole beings. Simulation provides opportunities to apply knowledge and skill through the use of simulators, standardized patients, and virtual settings. Concerns with simulation have been raised regarding the integration of the nursing process and recognizing the totality of the human being. Though simulation is useful as a technology, the nursing profession places importance on patient care, drawing on knowledge, theories, and expertise to administer patient care. There is a need to promptly and comprehensively define the concept of holistic nursing simulation to provide consistency and a basis for quality application within nursing curricula. This concept analysis uses Walker and Avant's approach to define holistic nursing simulation by defining antecedents, consequences, and empirical referents. The concept of holism and the practice of holistic nursing incorporated into simulation require an analysis of the concept of holistic nursing simulation by developing a language and model to provide direction for educators in design and development of holistic nursing simulation.

Development and Validation of the Homeostasis Concept Inventory

PubMed Central

McFarland, Jenny L.; Price, Rebecca M.; Wenderoth, Mary Pat; Martinková, Patrícia; Cliff, William; Michael, Joel; Modell, Harold; Wright, Ann

2017-01-01

We present the Homeostasis Concept Inventory (HCI), a 20-item multiple-choice instrument that assesses how well undergraduates understand this critical physiological concept. We used an iterative process to develop a set of questions based on elements in the Homeostasis Concept Framework. This process involved faculty experts and undergraduate students from associate’s colleges, primarily undergraduate institutions, regional and research-intensive universities, and professional schools. Statistical results provided strong evidence for the validity and reliability of the HCI. We found that graduate students performed better than undergraduates, biology majors performed better than nonmajors, and students performed better after receiving instruction about homeostasis. We used differential item analysis to assess whether students from different genders, races/ethnicities, and English language status performed differently on individual items of the HCI. We found no evidence of differential item functioning, suggesting that the items do not incorporate cultural or gender biases that would impact students’ performance on the test. Instructors can use the HCI to guide their teaching and student learning of homeostasis, a core concept of physiology. PMID:28572177

Contemporary concepts of dissociation.

PubMed

Avdibegović, Esmina

2012-10-01

The concept of dissociation was developed in the late 19th century by Pierre Janet for conditions of "double consciousness" in hypnosis, hysteria, spirit possession and mediumship. He defined dissociation as a deficit in the capacity of integration of two or more different "systems of ideas and functions that constitute personality", and suggested that it can be related to a genetic component, to severe illness and fatigue, and particularly to experiencing adverse, potentially traumatizing events. By the late 20th century, various and often contradictory concepts of dissociation were suggested, which were either insufficient or exceedingly including when compared to the original idea. Currently, dissociation is used to describe a wide range of normal and abnormal phenomena as a process in which behaviour, thoughts and emotions can become separated one from another. A complete presentation of mechanisms involved in dissociation is still unknown. Scientific research on basic processes of dissociation is derived mainly from studies of hypnosis and post-traumatic stress disorder. Given the controversies in modern concepts of dissociation, some researchers and theorists suggest return to the original understanding of dissociation as a basic premise for the further development of the concept of dissociation.

New Concepts and New Processes in Special Recreation. Institute Report #1. National Institute on New Models of Community Based Recreation and Leisure Programs and Services for Handicapped Children and Youth.

ERIC Educational Resources Information Center

Nesbitt, John A.

One of nine volumes in a series on recreation for the handicapped, the report examines new concepts and processes in special recreation. Among 10 topics considered are the following: goals of community recreation for the handicapped; delivery system; guidelines for management and development; local community leadership; planning, cooperation and…

A network control concept for the 30/20 GHz communication system baseband processor

NASA Technical Reports Server (NTRS)

Sabourin, D. J.; Hay, R. E.

1982-01-01

The architecture and system design for a satellite-switched TDMA communication system employing on-board processing was developed by Motorola for NASA's Lewis Research Center. The system design is based on distributed processing techniques that provide extreme flexibility in the selection of a network control protocol without impacting the satellite or ground terminal hardware. A network control concept that includes system synchronization and allows burst synchronization to occur within the system operational requirement is described. This concept integrates the tracking and control links with the communication links via the baseband processor, resulting in an autonomous system operational approach.

Field Artillery Ammunition Processing System (FAAPS) concept evaluation study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kring, C.T.; Babcock, S.M.; Watkin, D.C.

1992-06-01

The Field Artillery Ammunition Processing System (FAAPS) is an initiative to introduce a palletized load system (PLS) that is transportable with an automated ammunition processing and storage system for use on the battlefield. System proponents have targeted a 20% increase in the ammunition processing rate over the current operation while simultaneously reducing the total number of assigned field artillery battalion personnel by 30. The overall objective of the FAAPS Project is the development and demonstration of an improved process to accomplish these goals. The initial phase of the FAAPS Project and the subject of this study is the FAAPS conceptmore » evaluation. The concept evaluation consists of (1) identifying assumptions and requirements, (2) documenting the process flow, (3) identifying and evaluating technologies available to accomplish the necessary ammunition processing and storage operations, and (4) presenting alternative concepts with associated costs, processing rates, and manpower requirements for accomplishing the operation. This study provides insight into the achievability of the desired objectives.« less

Field Artillery Ammunition Processing System (FAAPS) concept evaluation study. Ammunition Logistics Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kring, C.T.; Babcock, S.M.; Watkin, D.C.

1992-06-01

The Field Artillery Ammunition Processing System (FAAPS) is an initiative to introduce a palletized load system (PLS) that is transportable with an automated ammunition processing and storage system for use on the battlefield. System proponents have targeted a 20% increase in the ammunition processing rate over the current operation while simultaneously reducing the total number of assigned field artillery battalion personnel by 30. The overall objective of the FAAPS Project is the development and demonstration of an improved process to accomplish these goals. The initial phase of the FAAPS Project and the subject of this study is the FAAPS conceptmore » evaluation. The concept evaluation consists of (1) identifying assumptions and requirements, (2) documenting the process flow, (3) identifying and evaluating technologies available to accomplish the necessary ammunition processing and storage operations, and (4) presenting alternative concepts with associated costs, processing rates, and manpower requirements for accomplishing the operation. This study provides insight into the achievability of the desired objectives.« less

From the past to the future: Integrating work experience into the design process.

PubMed

Bittencourt, João Marcos; Duarte, Francisco; Béguin, Pascal

2017-01-01

Integrating work activity issues into design process is a broadly discussed theme in ergonomics. Participation is presented as the main means for such integration. However, a late participation can limit the development of both project solutions and future work activity. This article presents the concept of construction of experience aiming at the articulated development of future activities and project solutions. It is a non-teleological approach where the initial concepts will be transformed by the experience built up throughout the design process. The method applied was a case study of an ergonomic participation during the design of a new laboratory complex for biotechnology research. Data was obtained through analysis of records in a simulation process using a Lego scale model and interviews with project participants. The simulation process allowed for developing new ways of working and generating changes in the initial design solutions, which enable workers to adopt their own developed strategies for conducting work more safely and efficiently in the future work system. Each project decision either opens or closes a window of opportunities for developing a future activity. Construction of experience in a non-teleological design process allows for understanding the consequences of project solutions for future work.

Managing the travel model process : small and medium-sized MPOs. Instructor guide.

DOT National Transportation Integrated Search

2013-09-01

The learning objectives of this course were to: explain fundamental travel model concepts; describe the model development process; identify key inputs and describe the quality control process; and identify and manage resources.

Managing the travel model process : small and medium-sized MPOs. Participant handbook.

DOT National Transportation Integrated Search

2013-09-01

The learning objectives of this course were to: explain fundamental travel model concepts; describe the model development process; identify key inputs and describe the quality control process; and identify and manage resources.

Advancing clinical reasoning in virtual patients - development and application of a conceptual framework.

PubMed

Hege, Inga; Kononowicz, Andrzej A; Berman, Norman B; Lenzer, Benedikt; Kiesewetter, Jan

2018-01-01

Background: Clinical reasoning is a complex skill students have to acquire during their education. For educators it is difficult to explain their reasoning to students, because it is partly an automatic and unconscious process. Virtual Patients (VPs) are used to support the acquisition of clinical reasoning skills in healthcare education. However, until now it remains unclear which features or settings of VPs optimally foster clinical reasoning. Therefore, our aims were to identify key concepts of the clinical reasoning process in a qualitative approach and draw conclusions on how each concept can be enhanced to advance the learning of clinical reasoning with virtual patients. Methods: We chose a grounded theory approach to identify key categories and concepts of learning clinical reasoning and develop a framework. Throughout this process, the emerging codes were discussed with a panel of interdisciplinary experts. In a second step we applied the framework to virtual patients. Results: Based on the data we identified the core category as the "multifactorial nature of learning clinical reasoning". This category is reflected in the following five main categories: Psychological Theories, Patient-centeredness, Context, Learner-centeredness, and Teaching/Assessment. Each category encompasses between four and six related concepts. Conclusions: With our approach we were able to elaborate how key categories and concepts of clinical reasoning can be applied to virtual patients. This includes aspects such as allowing learners to access a large number of VPs with adaptable levels of complexity and feedback or emphasizing dual processing, errors, and uncertainty.

Advancing clinical reasoning in virtual patients – development and application of a conceptual framework

PubMed Central

Hege, Inga; Kononowicz, Andrzej A.; Berman, Norman B.; Lenzer, Benedikt; Kiesewetter, Jan

2018-01-01

Background: Clinical reasoning is a complex skill students have to acquire during their education. For educators it is difficult to explain their reasoning to students, because it is partly an automatic and unconscious process. Virtual Patients (VPs) are used to support the acquisition of clinical reasoning skills in healthcare education. However, until now it remains unclear which features or settings of VPs optimally foster clinical reasoning. Therefore, our aims were to identify key concepts of the clinical reasoning process in a qualitative approach and draw conclusions on how each concept can be enhanced to advance the learning of clinical reasoning with virtual patients. Methods: We chose a grounded theory approach to identify key categories and concepts of learning clinical reasoning and develop a framework. Throughout this process, the emerging codes were discussed with a panel of interdisciplinary experts. In a second step we applied the framework to virtual patients. Results: Based on the data we identified the core category as the "multifactorial nature of learning clinical reasoning". This category is reflected in the following five main categories: Psychological Theories, Patient-centeredness, Context, Learner-centeredness, and Teaching/Assessment. Each category encompasses between four and six related concepts. Conclusions: With our approach we were able to elaborate how key categories and concepts of clinical reasoning can be applied to virtual patients. This includes aspects such as allowing learners to access a large number of VPs with adaptable levels of complexity and feedback or emphasizing dual processing, errors, and uncertainty. PMID:29497697

Virtual Collaborative Simulation Environment for Integrated Product and Process Development

NASA Technical Reports Server (NTRS)

Gulli, Michael A.

1997-01-01

Deneb Robotics is a leader in the development of commercially available, leading edge three- dimensional simulation software tools for virtual prototyping,, simulation-based design, manufacturing process simulation, and factory floor simulation and training applications. Deneb has developed and commercially released a preliminary Virtual Collaborative Engineering (VCE) capability for Integrated Product and Process Development (IPPD). This capability allows distributed, real-time visualization and evaluation of design concepts, manufacturing processes, and total factory and enterprises in one seamless simulation environment.

An interdisciplinary team communication framework and its application to healthcare 'e-teams' systems design

PubMed Central

2009-01-01

Background There are few studies that examine the processes that interdisciplinary teams engage in and how we can design health information systems (HIS) to support those team processes. This was an exploratory study with two purposes: (1) To develop a framework for interdisciplinary team communication based on structures, processes and outcomes that were identified as having occurred during weekly team meetings. (2) To use the framework to guide 'e-teams' HIS design to support interdisciplinary team meeting communication. Methods An ethnographic approach was used to collect data on two interdisciplinary teams. Qualitative content analysis was used to analyze the data according to structures, processes and outcomes. Results We present details for team meta-concepts of structures, processes and outcomes and the concepts and sub concepts within each meta-concept. We also provide an exploratory framework for interdisciplinary team communication and describe how the framework can guide HIS design to support 'e-teams'. Conclusion The structures, processes and outcomes that describe interdisciplinary teams are complex and often occur in a non-linear fashion. Electronic data support, process facilitation and team video conferencing are three HIS tools that can enhance team function. PMID:19754966

An interdisciplinary team communication framework and its application to healthcare 'e-teams' systems design.

PubMed

Kuziemsky, Craig E; Borycki, Elizabeth M; Purkis, Mary Ellen; Black, Fraser; Boyle, Michael; Cloutier-Fisher, Denise; Fox, Lee Ann; MacKenzie, Patricia; Syme, Ann; Tschanz, Coby; Wainwright, Wendy; Wong, Helen

2009-09-15

There are few studies that examine the processes that interdisciplinary teams engage in and how we can design health information systems (HIS) to support those team processes. This was an exploratory study with two purposes: (1) To develop a framework for interdisciplinary team communication based on structures, processes and outcomes that were identified as having occurred during weekly team meetings. (2) To use the framework to guide 'e-teams' HIS design to support interdisciplinary team meeting communication. An ethnographic approach was used to collect data on two interdisciplinary teams. Qualitative content analysis was used to analyze the data according to structures, processes and outcomes. We present details for team meta-concepts of structures, processes and outcomes and the concepts and sub concepts within each meta-concept. We also provide an exploratory framework for interdisciplinary team communication and describe how the framework can guide HIS design to support 'e-teams'. The structures, processes and outcomes that describe interdisciplinary teams are complex and often occur in a non-linear fashion. Electronic data support, process facilitation and team video conferencing are three HIS tools that can enhance team function.

Thread concept for automatic task parallelization in image analysis

NASA Astrophysics Data System (ADS)

Lueckenhaus, Maximilian; Eckstein, Wolfgang

1998-09-01

Parallel processing of image analysis tasks is an essential method to speed up image processing and helps to exploit the full capacity of distributed systems. However, writing parallel code is a difficult and time-consuming process and often leads to an architecture-dependent program that has to be re-implemented when changing the hardware. Therefore it is highly desirable to do the parallelization automatically. For this we have developed a special kind of thread concept for image analysis tasks. Threads derivated from one subtask may share objects and run in the same context but may process different threads of execution and work on different data in parallel. In this paper we describe the basics of our thread concept and show how it can be used as basis of an automatic task parallelization to speed up image processing. We further illustrate the design and implementation of an agent-based system that uses image analysis threads for generating and processing parallel programs by taking into account the available hardware. The tests made with our system prototype show that the thread concept combined with the agent paradigm is suitable to speed up image processing by an automatic parallelization of image analysis tasks.

The use of concept maps during knowledge elicitation in ontology development processes – the nutrigenomics use case

PubMed Central

Castro, Alexander Garcia; Rocca-Serra, Philippe; Stevens, Robert; Taylor, Chris; Nashar, Karim; Ragan, Mark A; Sansone, Susanna-Assunta

2006-01-01

Background Incorporation of ontologies into annotations has enabled 'semantic integration' of complex data, making explicit the knowledge within a certain field. One of the major bottlenecks in developing bio-ontologies is the lack of a unified methodology. Different methodologies have been proposed for different scenarios, but there is no agreed-upon standard methodology for building ontologies. The involvement of geographically distributed domain experts, the need for domain experts to lead the design process, the application of the ontologies and the life cycles of bio-ontologies are amongst the features not considered by previously proposed methodologies. Results Here, we present a methodology for developing ontologies within the biological domain. We describe our scenario, competency questions, results and milestones for each methodological stage. We introduce the use of concept maps during knowledge acquisition phases as a feasible transition between domain expert and knowledge engineer. Conclusion The contributions of this paper are the thorough description of the steps we suggest when building an ontology, example use of concept maps, consideration of applicability to the development of lower-level ontologies and application to decentralised environments. We have found that within our scenario conceptual maps played an important role in the development process. PMID:16725019

The Use of Multi-Criteria Evaluation and Network Analysis in the Area Development Planning Process

DTIC Science & Technology

2013-03-01

layouts. The alternative layout scoring process, base in multi-criteria evaluation, returns a quantitative score for each alternative layout and a...The purpose of this research was to develop improvements to the area development planning process. These plans are used to improve operations within...an installation sub-section by altering the physical layout of facilities. One methodology was developed based on apply network analysis concepts to

Design, Development, and Initial Evaluation of a Terminology for Clinical Decision Support and Electronic Clinical Quality Measurement.

PubMed

Lin, Yanhua; Staes, Catherine J; Shields, David E; Kandula, Vijay; Welch, Brandon M; Kawamoto, Kensaku

2015-01-01

When coupled with a common information model, a common terminology for clinical decision support (CDS) and electronic clinical quality measurement (eCQM) could greatly facilitate the distributed development and sharing of CDS and eCQM knowledge resources. To enable such scalable knowledge authoring and sharing, we systematically developed an extensible and standards-based terminology for CDS and eCQM in the context of the HL7 Virtual Medical Record (vMR) information model. The development of this terminology entailed three steps: (1) systematic, physician-curated concept identification from sources such as the Health Information Technology Standards Panel (HITSP) and the SNOMED-CT CORE problem list; (2) concept de-duplication leveraging the Unified Medical Language System (UMLS) MetaMap and Metathesaurus; and (3) systematic concept naming using standard terminologies and heuristic algorithms. This process generated 3,046 concepts spanning 68 domains. Evaluation against representative CDS and eCQM resources revealed approximately 50-70% concept coverage, indicating the need for continued expansion of the terminology.

Design, Development, and Initial Evaluation of a Terminology for Clinical Decision Support and Electronic Clinical Quality Measurement

PubMed Central

Lin, Yanhua; Staes, Catherine J; Shields, David E; Kandula, Vijay; Welch, Brandon M; Kawamoto, Kensaku

2015-01-01

When coupled with a common information model, a common terminology for clinical decision support (CDS) and electronic clinical quality measurement (eCQM) could greatly facilitate the distributed development and sharing of CDS and eCQM knowledge resources. To enable such scalable knowledge authoring and sharing, we systematically developed an extensible and standards-based terminology for CDS and eCQM in the context of the HL7 Virtual Medical Record (vMR) information model. The development of this terminology entailed three steps: (1) systematic, physician-curated concept identification from sources such as the Health Information Technology Standards Panel (HITSP) and the SNOMED-CT CORE problem list; (2) concept de-duplication leveraging the Unified Medical Language System (UMLS) MetaMap and Metathesaurus; and (3) systematic concept naming using standard terminologies and heuristic algorithms. This process generated 3,046 concepts spanning 68 domains. Evaluation against representative CDS and eCQM resources revealed approximately 50–70% concept coverage, indicating the need for continued expansion of the terminology. PMID:26958220

The Mediation of Tools in the Development of Formal Mathematical Concepts: The Compass and the Circle as an Example.

ERIC Educational Resources Information Center

Chassapis, Dimitris

1999-01-01

Focuses on the process by which children develop a formal mathematical concept of the circle by using various instruments to draw circles within the context of a goal-directed drawing task. Concludes that the use of the compass in circle drawing structures the circle-drawing operation in a radically different fashion than circle tracers and…

Advanced high-temperature thermal energy storage media for industrial applications

NASA Astrophysics Data System (ADS)

Clear, T. D.; Weibel, R. T.

An advanced thermal energy storage (TES) media concept based on use of carbonate salt/ceramic composite materials is being developed for industrial process and reject heat applications. This paper describes the composite latent/sensible media concept and its potential advantages over state-of-the-art latent heat systems. Media stability requirements, on-going materials development efforts and planned TES performance evaluation tests are discussed.

Advanced high-temperature thermal energy storage media for industrial applications

NASA Astrophysics Data System (ADS)

Claar, T. D.; Waibel, R. T.

1982-02-01

An advanced thermal energy storage media concept based on use of carbonate salt/ceramic composite materials is being developed for industrial process and reject heat applications. The composite latent/sensible media concept and its potential advantages over state of the art latent heat systems is described. Media stability requirements, on-going materials development efforts, and planned thermal energy storage (TES) performance evaluation tests are discussed.

The TV Development Concept Papers. Preliminary Working Draft. Occasional Papers, Vol. 1, No. 4.

ERIC Educational Resources Information Center

To Educate the People Consortium, Detroit, MI.

This working paper is an intermediary stage in the development of a new telecurriculum for the To Educate the People Consortium. Section 1 is an introduction to the process. Section 2 contains the outlines of 18 courses in the telecurriculum based on concept papers submitted by teams from the consortium. Each course is in the format of six 1-hour…

Microwave assisted step-by-step process for the production of fucoidan, alginate sodium, sugars and biochar from Ascophyllum nodosum through a biorefinery concept.

PubMed

Yuan, Yuan; Macquarrie, Duncan J

2015-12-01

The biorefinery is an important concept for the development of alternative routes to a range of interesting and important materials from renewable resources. It ensures that the resources are used fully and that all parts of them are valorized. This paper develops this concept, using brown macroalgae Ascophyllum nodosum as an example, by assistance of microwave technology. A step-by-step process was designed to obtain fucoidan, alginates, sugars and biochar (alga residue) consecutively. The yields of fucoidan, alginates, sugars and biochar were 14.09%, 18.24%, 10.87% and 21.44%, respectively. To make an evaluation of the biorefinery process, seaweed sample was also treated for fucoidan extraction only, alginate extraction only and hydrothermal treatment for sugars and biochar only. The chemical composition and properties of each product were also analyzed. The results indicated that A. nodosum could be potentially used as feedstock for a biorefinery process to produce valuable chemicals and fuels. Copyright © 2015 Elsevier Ltd. All rights reserved.

Adapting Concepts from Systems Biology to Develop Systems Exposure Event Networks for Exposure Science Research

EPA Science Inventory

Systems exposure science has emerged from the traditional environmental exposure assessment framework and incorporates new concepts that link sources of human exposure to internal dose and metabolic processes. Because many human environmental studies are designed for retrospectiv...

Final report on the maintenance asset management project : phase I.

DOT National Transportation Integrated Search

2012-07-01

This project resulted in the development of a proof of concept for a features inventory process to be used by field staff. The resulting concept is adaptable for different asset classes (e.g. culverts, guardrail) and able to leverage existing DOT res...

Development of the technology for the fabrication of reliable laminar from control panels

NASA Technical Reports Server (NTRS)

Meade, L. E.; Kays, A. O.; Ferrill, R. S.; Young, H. R.

1977-01-01

Materials were assessed and fabrication techniques were developed for use in the manufacture of wing surface materials compatible with the application of both aluminum alloys and nonmetallic composites. The concepts investigated included perforations and slots in the metallic test panels and microporosity and perforations in the composite test panels. Perforations were produced in the metallic test panels by the electron beam process and slots were developed by controlled gaps between the metal sheets. Microporosity was produced in the composite test panels by the resin bleed process, and perforations were produced by the fugitive fiber technique. Each of these concepts was fabricated into test panels, and air flow tests were conducted on the panels.

Advanced information processing system - Status report. [for fault tolerant and damage tolerant data processing for aerospace vehicles

NASA Technical Reports Server (NTRS)

Brock, L. D.; Lala, J.

1986-01-01

The Advanced Information Processing System (AIPS) is designed to provide a fault tolerant and damage tolerant data processing architecture for a broad range of aerospace vehicles. The AIPS architecture also has attributes to enhance system effectiveness such as graceful degradation, growth and change tolerance, integrability, etc. Two key building blocks being developed by the AIPS program are a fault and damage tolerant processor and communication network. A proof-of-concept system is now being built and will be tested to demonstrate the validity and performance of the AIPS concepts.

Psychodynamic therapy from the perspective of self-organization. a concept of change and a methodological approach for empirical examination.

PubMed

Gumz, Antje; Geyer, Michael; Brähler, Elmar

2014-01-01

Observations from therapeutic practice and a series of empirical findings, for example, those on discontinuous change in psychotherapeutic processes, suggest modelling the therapeutic process as a self-organizing system with stable and critical instable phases and abrupt transitions. Here, a concept of psychotherapeutic change is presented that applies self-organization theory to psychodynamic principles. The authors explain the observations and considerations that form the basis of the concept and present some connections with existing findings and concepts. On the basis of this model, they generated two hypotheses regarding the co-occurrence of instability and discontinuous change and the degree of synchrony between the therapist and patient. A study design to test these hypotheses was developed and applied to a single case (psychodynamic therapy). After each session, patient and therapist rated their interaction. A measure of instability was calculated across the resulting time series. Sequences of destabilization were observed. On the basis of points of extreme instability, the process was divided into phases. Local instability maxima were accompanied by significant discontinuous change. Destabilization was highly synchronous in therapist and patient ratings. The authors discussed the concept and the methodological procedure. The approach enables the operationalization of crises and to empirically assess the significance of critical phases and developments within the therapeutic relationship. We present a concept of change that applies self-organization theory to psychodynamic therapy. We empirically tested the hypotheses formulated in the concept based on an extract of 125 long-term psychodynamic therapy sessions. We continuously monitored the therapeutic interaction and calculated a measure of the instability of the assessments. We identified several sequences of stable and unstable episodes. Episodes of high instability were accompanied by discontinuous change. On the basis of these episodes of high instability, we divided the process into four phases. Mean values of variables differed across these phases. Destabilization proved to be highly synchronous in therapist and patient ratings. The approach allows to empirically assess critical phases and developments within the therapeutic relationship. Copyright © 2013 John Wiley & Sons, Ltd.

Differentiation and displacement: Unpicking the relationship between accounts of illness and social structure

PubMed Central

Gibson, Barry J; Paul, Ninu R

2014-01-01

This article seeks to unpack the relationship between social structure and accounts of illness. Taking dentine hypersensitivity as an example, this article explores the perspective that accounts of illness are sense-making processes that draw on a readily available pool of meaning. This pool of meaning is composed of a series of distinctions that make available a range of different lines of communication and action about such conditions. Such lines of communication are condensed and preserved over time and are often formed around a concept and its counter concept. The study of such processes is referred to as semantic analysis and involves drawing on the tools and techniques of conceptual history. This article goes on to explore how the semantics of dentine hypersensitivity developed. It illustrates how processes of social differentiation led to the concept being separated from the more dominant concept of dentine sensitivity and how it was medicalised, scientised and economised. In short, this study seeks to present the story of how society has developed a specific language for communicating about sensitivity and hypersensitivity in teeth. In doing so, it proposes that accounts of dentine hypersensitivity draw on lines of communication that society has preserved over time. PMID:25197262

The Experience Factory: Strategy and Practice

NASA Technical Reports Server (NTRS)

Basili, Victor R.; Caldiera, Gianluigi

1995-01-01

The quality movement, that has had in recent years a dramatic impact on all industrial sectors, has recently reached the system and software industry. Although some concepts of quality management, originally developed for other product types, can be applied to software, its specificity as a product which is developed and not produced requires a special approach. This paper introduces a quality paradigm specifically tailored on the problem of the systems and software industry. Reuse of products, processes and experiences originating from the system life cycle is seen today as a feasible solution to the problem of developing higher quality systems at a lower cost. In fact, quality improvement is very often achieved by defining and developing an appropriate set of strategic capabilities and core competencies to support them. A strategic capability is, in this context, a corporate goal defined by the business position of the organization and implemented by key business processes. Strategic capabilities are supported by core competencies, which are aggregate technologies tailored to the specific needs of the organization in performing the needed business processes. Core competencies are non-transitional, have a consistent evolution, and are typically fueled by multiple technologies. Their selection and development requires commitment, investment and leadership. The paradigm introduced in this paper for developing core competencies is the Quality Improvement Paradigm which consists of six steps: (1) Characterize the environment, (2) Set the goals, (3) Choose the process, (4) Execute the process, (5) Analyze the process data, and (6) Package experience. The process must be supported by a goal oriented approach to measurement and control, and an organizational infrastructure, called Experience Factory. The Experience Factory is a logical and physical organization distinct from the project organizations it supports. Its goal is development and support of core competencies through capitalization and reuse of its cycle experience and products. The paper introduces the major concepts of the proposed approach, discusses their relationship with other approaches used in the industry, and presents a case in which those concepts have been successfully applied.

Ottawa Model of Implementation Leadership and Implementation Leadership Scale: mapping concepts for developing and evaluating theory-based leadership interventions.

PubMed

Gifford, Wendy; Graham, Ian D; Ehrhart, Mark G; Davies, Barbara L; Aarons, Gregory A

2017-01-01

Leadership in health care is instrumental to creating a supportive organizational environment and positive staff attitudes for implementing evidence-based practices to improve patient care and outcomes. The purpose of this study is to demonstrate the alignment of the Ottawa Model of Implementation Leadership (O-MILe), a theoretical model for developing implementation leadership, with the Implementation Leadership Scale (ILS), an empirically validated tool for measuring implementation leadership. A secondary objective is to describe the methodological process for aligning concepts of a theoretical model with an independently established measurement tool for evaluating theory-based interventions. Modified template analysis was conducted to deductively map items of the ILS onto concepts of the O-MILe. An iterative process was used in which the model and scale developers (n=5) appraised the relevance, conceptual clarity, and fit of each ILS items with the O-MILe concepts through individual feedback and group discussions until consensus was reached. All 12 items of the ILS correspond to at least one O-MILe concept, demonstrating compatibility of the ILS as a measurement tool for the O-MILe theoretical constructs. The O-MILe provides a theoretical basis for developing implementation leadership, and the ILS is a compatible tool for measuring leadership based on the O-MILe. Used together, the O-MILe and ILS provide an evidence- and theory-based approach for developing and measuring leadership for implementing evidence-based practices in health care. Template analysis offers a convenient approach for determining the compatibility of independently developed evaluation tools to test theoretical models.

Ottawa Model of Implementation Leadership and Implementation Leadership Scale: mapping concepts for developing and evaluating theory-based leadership interventions

PubMed Central

Gifford, Wendy; Graham, Ian D; Ehrhart, Mark G; Davies, Barbara L; Aarons, Gregory A

2017-01-01

Purpose Leadership in health care is instrumental to creating a supportive organizational environment and positive staff attitudes for implementing evidence-based practices to improve patient care and outcomes. The purpose of this study is to demonstrate the alignment of the Ottawa Model of Implementation Leadership (O-MILe), a theoretical model for developing implementation leadership, with the Implementation Leadership Scale (ILS), an empirically validated tool for measuring implementation leadership. A secondary objective is to describe the methodological process for aligning concepts of a theoretical model with an independently established measurement tool for evaluating theory-based interventions. Methods Modified template analysis was conducted to deductively map items of the ILS onto concepts of the O-MILe. An iterative process was used in which the model and scale developers (n=5) appraised the relevance, conceptual clarity, and fit of each ILS items with the O-MILe concepts through individual feedback and group discussions until consensus was reached. Results All 12 items of the ILS correspond to at least one O-MILe concept, demonstrating compatibility of the ILS as a measurement tool for the O-MILe theoretical constructs. Conclusion The O-MILe provides a theoretical basis for developing implementation leadership, and the ILS is a compatible tool for measuring leadership based on the O-MILe. Used together, the O-MILe and ILS provide an evidence- and theory-based approach for developing and measuring leadership for implementing evidence-based practices in health care. Template analysis offers a convenient approach for determining the compatibility of independently developed evaluation tools to test theoretical models. PMID:29355212

Application Development for Optimizing Patient Placement on Aeromedical Evacuation Flights: Proof-of-Concept

DTIC Science & Technology

2018-01-12

outcomes. This study included three phases: knowledge elicitation, establishment of rule-based, logic requirements, and the development of the POC iOS ...establish the logic needed for a mobile app prior to programming for iOS platforms. The study team selected Microsoft Excel because it enabled the...distribution of these plans would streamline the plan development process. Thus, as a proof-of-concept, the study team conducted a multi-phased effort

Feeling Comfortable: A Humanbecoming Perspective.

PubMed

Dobrzykowski, Teresa M

2017-01-01

Feeling comfortable is a universal living experience. From the worldview of the humanbecoming paradigm, concept inventing is an appropriate method to expand understanding and knowledge of universal experiences. The purpose of this article is to provide a synthetic definition of feeling comfortable using the concept inventing process. Through concept inventing, a synthetic definition of feeling comfortable emerged as penetrating quietude amid potential upheaval arising with opportunities and restrictions with envisioning the familiar anew. Further development of the concept through qualitative research is recommended.

Developing embodied cognition: insights from children’s concepts and language processing

PubMed Central

Wellsby, Michele; Pexman, Penny M.

2014-01-01

Over the past decade, theories of embodied cognition have become increasingly influential with research demonstrating that sensorimotor experiences are involved in cognitive processing; however, this embodied research has primarily focused on adult cognition. The notion that sensorimotor experience is important for acquiring conceptual knowledge is not a novel concept for developmental researchers, and yet theories of embodied cognition often do not fully integrate developmental findings. We propose that in order for an embodied cognition perspective to be refined and advanced as a lifelong theory of cognition, it is important to consider what can be learned from research with children. In this paper, we focus on development of concepts and language processing, and examine the importance of children's embodied experiences for these aspects of cognition in particular. Following this review, we outline what we see as important developmental issues that need to be addressed in order to determine the extent to which language and conceptual knowledge are embodied and to refine theories of embodied cognition. PMID:24904513

Development as a Complex Process of Change: Conception and Analysis of Projects, Programs and Policies

ERIC Educational Resources Information Center

Nordtveit, Bjorn Harald

2010-01-01

Development is often understood as a linear process of change towards Western modernity, a vision that is challenged by this paper, arguing that development efforts should rather be connected to the local stakeholders' sense of their own development. Further, the paper contends that Complexity Theory is more effective than a linear theory of…

An overview on tritium permeation barrier development for WCLL blanket concept

NASA Astrophysics Data System (ADS)

Aiello, A.; Ciampichetti, A.; Benamati, G.

2004-08-01

The reduction of tritium permeation through blanket structural materials and cooling tubes has to be carefully evaluated to minimise radiological hazards. A strong effort has been made in the past to select the best technological solution for the realisation of tritium permeation barriers (TPB) on complex structures not directly accessible after the completion of the manufacturing process. The best solution was identified in aluminium rich coatings, which form Al 2O 3 at their surface. Two technologies were selected as reference for the realisation of coating in the WCLL blanket concept: the chemical vapour deposition (CVD) process developed on laboratory scale by CEA, and the hot dipping (HD) process developed by FZK. The results obtained during three years of tests on CVD and HD coated specimens in gas and liquid metal phase are summarised and discussed.

Creating the Chemistry in Cellular Respiration Concept Inventory (CCRCI)

NASA Astrophysics Data System (ADS)

Forshee, Jay Lance, II

Students at our institution report cellular respiration to be the most difficult concept they encounter in undergraduate biology, but why students find this difficult is unknown. Students may find cellular respiration difficult because there is a large amount of steps, or because there are persistent, long-lasting misconceptions and misunderstandings surrounding their knowledge of chemistry, which affect their performance on cellular respiration assessments. Most studies of cellular respiration focus on student macro understanding of the process related to breathing, and matter and energy. To date, no studies identify which chemistry concepts are most relevant to students' development of an understanding of the process of cellular respiration or have developed an assessment to measure student understanding of them. Following the Delphi method, the researchers conducted expert interviews with faculty members from four-year, masters-, and PhD-granting institutions who teach undergraduate general biology, and are experts in their respective fields of biology. From these interviews, researchers identified twelve chemistry concepts important to understanding cellular respiration and using surveys, these twelve concepts were refined into five (electron transfer, energy transfer, thermodynamics (law/conservation), chemical reactions, and gradients). The researchers then interviewed undergraduate introductory biology students at a large Midwestern university to identify their knowledge and misconceptions of the chemistry concepts that the faculty had identified previously as important. The CCRCI was developed using the five important chemistry concepts underlying cellular respiration. The final version of the CCRCI was administered to n=160 introductory biology students during the spring 2017 semester. Reliability of the CCRCI was evaluated using Cronbach's alpha (=.7) and split-half reliability (=.769), and validity of the instrument was assessed through content validity via expert agreement, response process validity through student think-aloud interviews, and via the Delphi survey methodology. Included is a discussion of item function (difficulty, discrimination, and point-biserial correlation), persistent misconceptions and the interpretation, uses, and future directions of the CCRCI.

Conical scan impact study. Volume 2: Small local user data processing facility. [multispectral band scanner design alternatives for earth resources data

NASA Technical Reports Server (NTRS)

Ebert, D. H.; Chase, P. E.; Dye, J.; Fahline, W. C.; Johnson, R. H.

1973-01-01

The impact of a conical scan versus a linear scan multispectral scanner (MSS) instrument on a small local-user data processing facility was studied. User data requirements were examined to determine the unique system rquirements for a low cost ground system (LCGS) compatible with the Earth Observatory Satellite (EOS) system. Candidate concepts were defined for the LCGS and preliminary designs were developed for selected concepts. The impact of a conical scan MSS versus a linear scan MSS was evaluated for the selected concepts. It was concluded that there are valid user requirements for the LCGS and, as a result of these requirements, the impact of the conical scanner is minimal, although some new hardware development for the LCGS is necessary to handle conical scan data.

A Primer on Adventure Education in the Camp Setting.

ERIC Educational Resources Information Center

Nei, Eric

2003-01-01

Basic concepts of experiential learning theory are presented to assist camp directors in choosing knowledgeable staff and developing successful adventure programs. These concepts include assessment of learner (camper) readiness, activity sequencing, learning cycle, comfort zone, activity framing, task goals versus process goals, and five stages of…

Energy and the Curriculum: An Infusion Process.

ERIC Educational Resources Information Center

Fellows, Julia

1980-01-01

Urges that energy concepts be taught in an interdisciplinary manner from kindergarten through the twelfth grade. Describes a materials development program, the Project for an Energy-Enriched Curriculum, which offers a broad-based curriculum emphasizing general energy concepts, availability of energy resources, and information on how various uses…

Equipment concept design and development plans for microgravity science and applications research on space station: Combustion tunnel, laser diagnostic system, advanced modular furnace, integrated electronics laboratory

NASA Technical Reports Server (NTRS)

Uhran, M. L.; Youngblood, W. W.; Georgekutty, T.; Fiske, M. R.; Wear, W. O.

1986-01-01

Taking advantage of the microgravity environment of space NASA has initiated the preliminary design of a permanently manned space station that will support technological advances in process science and stimulate the development of new and improved materials having applications across the commercial spectrum. Previous studies have been performed to define from the researcher's perspective, the requirements for laboratory equipment to accommodate microgravity experiments on the space station. Functional requirements for the identified experimental apparatus and support equipment were determined. From these hardware requirements, several items were selected for concept designs and subsequent formulation of development plans. This report documents the concept designs and development plans for two items of experiment apparatus - the Combustion Tunnel and the Advanced Modular Furnace, and two items of support equipment the Laser Diagnostic System and the Integrated Electronics Laboratory. For each concept design, key technology developments were identified that are required to enable or enhance the development of the respective hardware.

An evolving-requirements technology assessment process for advanced propulsion concepts

NASA Astrophysics Data System (ADS)

McClure, Erin Kathleen

The following dissertation investigates the development of a methodology suitable for the evaluation of advanced propulsion concepts. At early stages of development, both the future performance of these concepts and their requirements are highly uncertain, making it difficult to forecast their future value. Developing advanced propulsion concepts requires a huge investment of resources. The methodology was developed to enhance the decision-makers understanding of the concepts, so that they could mitigate the risks associated with developing such concepts. A systematic methodology to identify potential advanced propulsion concepts and assess their robustness is necessary to reduce the risk of developing advanced propulsion concepts. Existing advanced design methodologies have evaluated the robustness of technologies or concepts to variations in requirements, but they are not suitable to evaluate a large number of dissimilar concepts. Variations in requirements have been shown to impact the development of advanced propulsion concepts, and any method designed to evaluate these concepts must incorporate the possible variations of the requirements into the assessment. In order to do so, a methodology was formulated to be capable of accounting for two aspects of the problem. First, it had to systemically identify a probabilistic distribution for the future requirements. Such a distribution would allow decision-makers to quantify the uncertainty introduced by variations in requirements. Second, the methodology must be able to assess the robustness of the propulsion concepts as a function of that distribution. This dissertation describes in depth these enabling elements and proceeds to synthesize them into a new method, the Evolving Requirements Technology Assessment (ERTA). As a proof of concept, the ERTA method was used to evaluate and compare advanced propulsion systems that will be capable of powering a hurricane tracking, High Altitude, Long Endurance (HALE) unmanned aerial vehicle (UAV). The use of the ERTA methodology to assess HALE UAV propulsion concepts demonstrated that potential variations in requirements do significantly impact the assessment and selection of propulsion concepts. The proof of concept also demonstrated that traditional forecasting techniques, such as the cross impact analysis, could be used to forecast the requirements for advanced propulsion concepts probabilistically. "Fitness", a measure of relative goodness, was used to evaluate the concepts. Finally, stochastic optimizations were used to evaluate the propulsion concepts across the range of requirement sets that were considered.

Piaget and Organic Chemistry: Teaching Introductory Organic Chemistry through Learning Cycles

NASA Astrophysics Data System (ADS)

Libby, R. Daniel

1995-07-01

This paper describes the first application of the Piaget-based learning cycle technique (Atkin & Karplus, Sci. Teach. 1962, 29, 45-51) to an introductory organic chemistry course. It also presents the step-by-step process used to convert a lecture course into a discussion-based active learning course. The course is taught in a series of learning cycles. A learning cycle is a three phase process that provides opportunities for students to explore new material and work with an instructor to recognize logical patterns in data, and devise and test hypotheses. In this application, the first phase, exploration, involves out-of-class student evaluation of data in attempts to identify significant trends and develop hypotheses that might explain the trends in terms of fundamental scientific principles. In the second phase, concept invention, the students and instructor work together in-class to evaluate student hypotheses and find concepts that work best in explaining the data. The third phase, application, is an out-of-class application of the concept to new situations. The development of learning cycles from lecture notes is presented as an 8 step procedure. The process involves revaluation and restructuring of the course material to maintain a continuity of concept development according to the instructor's logic, dividing topics into individual concepts or techniques, and refocusing the presentation in terms of large numbers of examples that can serve as data for students in their exploration and application activities. A sample learning cycle and suggestions for ways of limited implementation of learning cycles into existing courses are also provided.

NASA Advanced Concepts Office, Earth-To-Orbit Team Design Process and Tools

NASA Technical Reports Server (NTRS)

Waters, Eric D.; Creech, Dennis M.; Garcia, Jessica; Threet, Grady E., Jr.; Phillips, Alan

2012-01-01

The Earth-to-Orbit Team (ETO) of the Advanced Concepts Office (ACO) at NASA Marshall Space Flight Center (MSFC) is considered the pre-eminent go-to group for pre-phase A and phase A concept definition. Over the past several years the ETO team has evaluated thousands of launch vehicle concept variations for a significant number of studies including agency-wide efforts such as the Exploration Systems Architecture Study (ESAS), Constellation, Heavy Lift Launch Vehicle (HLLV), Augustine Report, Heavy Lift Propulsion Technology (HLPT), Human Exploration Framework Team (HEFT), and Space Launch System (SLS). The ACO ETO Team is called upon to address many needs in NASA s design community; some of these are defining extremely large trade-spaces, evaluating advanced technology concepts which have not been addressed by a large majority of the aerospace community, and the rapid turn-around of highly time critical actions. It is the time critical actions, those often limited by schedule or little advanced warning, that have forced the five member ETO team to develop a design process robust enough to handle their current output level in order to meet their customer s needs. Based on the number of vehicle concepts evaluated over the past year this output level averages to four completed vehicle concepts per day. Each of these completed vehicle concepts includes a full mass breakdown of the vehicle to a tertiary level of subsystem components and a vehicle trajectory analysis to determine optimized payload delivery to specified orbital parameters, flight environments, and delta v capability. A structural analysis of the vehicle to determine flight loads based on the trajectory output, material properties, and geometry of the concept is also performed. Due to working in this fast-paced and sometimes rapidly changing environment, the ETO Team has developed a finely tuned process to maximize their delivery capabilities. The objective of this paper is to describe the interfaces between the three disciplines used in the design process: weights and sizing, trajectory, and structural analysis. The tools used to perform such analysis are INtegrated Rocket Sizing (INTROS), Program to Optimize Simulated Trajectories (POST), and Launch Vehicle Analysis (LVA) respectively. The methods each discipline uses to streamline their particular part of the design process will also be discussed.

NASA Advanced Concepts Office, Earth-To-Orbit Team Design Process and Tools

NASA Technical Reports Server (NTRS)

Waters, Eric D.; Garcia, Jessica; Threet, Grady E., Jr.; Phillips, Alan

2013-01-01

The Earth-to-Orbit Team (ETO) of the Advanced Concepts Office (ACO) at NASA Marshall Space Flight Center (MSFC) is considered the pre-eminent "go-to" group for pre-phase A and phase A concept definition. Over the past several years the ETO team has evaluated thousands of launch vehicle concept variations for a significant number of studies including agency-wide efforts such as the Exploration Systems Architecture Study (ESAS), Constellation, Heavy Lift Launch Vehicle (HLLV), Augustine Report, Heavy Lift Propulsion Technology (HLPT), Human Exploration Framework Team (HEFT), and Space Launch System (SLS). The ACO ETO Team is called upon to address many needs in NASA's design community; some of these are defining extremely large trade-spaces, evaluating advanced technology concepts which have not been addressed by a large majority of the aerospace community, and the rapid turn-around of highly time critical actions. It is the time critical actions, those often limited by schedule or little advanced warning, that have forced the five member ETO team to develop a design process robust enough to handle their current output level in order to meet their customer's needs. Based on the number of vehicle concepts evaluated over the past year this output level averages to four completed vehicle concepts per day. Each of these completed vehicle concepts includes a full mass breakdown of the vehicle to a tertiary level of subsystem components and a vehicle trajectory analysis to determine optimized payload delivery to specified orbital parameters, flight environments, and delta v capability. A structural analysis of the vehicle to determine flight loads based on the trajectory output, material properties, and geometry of the concept is also performed. Due to working in this fast-paced and sometimes rapidly changing environment, the ETO Team has developed a finely tuned process to maximize their delivery capabilities. The objective of this paper is to describe the interfaces between the three disciplines used in the design process: weights and sizing, trajectory, and structural analysis. The tools used to perform such analysis are INtegrated Rocket Sizing (INTROS), Program to Optimize Simulated Trajectories (POST), and Launch Vehicle Analysis (LVA) respectively. The methods each discipline uses to streamline their particular part of the design process will also be discussed.

De-implementation: A concept analysis.

PubMed

Upvall, Michele J; Bourgault, Annette M

2018-04-25

The purpose of this concept analysis is to explore the meaning of de-implementation and provide a definition that can be used by researchers and clinicians to facilitate evidence-based practice. De-implementation is a relatively unknown process overshadowed by the novelty of introducing new ideas and techniques into practice. Few studies have addressed the challenge of de-implementation and the cognitive processes involved when terminating harmful or unnecessary practices. Also, confusion exists regarding the myriad of terms used to describe de-implementation processes. Walker and Avant's method (2011) for describing concepts was used to clarify de-implementation. A database search limited to academic journals yielded 281 publications representing basic research, study protocols, and editorials/commentaries from implementation science experts. After applying exclusion criterion of English language only and eliminating overlap between databases, 41 articles were selected for review. Literature review and synthesis provided a concept analysis and a distinct definition of de-implementation. De-implementation was defined as the process of identifying and removing harmful, non-cost-effective, or ineffective practices based on tradition and without adequate scientific support. The analysis provided further refinement of de-implementation as a significant concept for ongoing theory development in implementation science and clinical practice. © 2018 Wiley Periodicals, Inc.

Knowledge translation in health care: a concept analysis.

PubMed

Khoddam, Homeira; Mehrdad, Neda; Peyrovi, Hamid; Kitson, Alison L; Schultz, Timothy J; Athlin, Asa Muntlin

2014-01-01

Although knowledge translation is one of the most widely used concepts in health and medical literature, there is a sense of ambiguity and confusion over its definition. The aim of this paper is to clarify the characteristics of KT. This will assist the theoretical development of it and shape its implementation into the health care system Methods: Walker and Avant's framework was used to analyze the concept and the related literature published between 2000 and 2010 was reviewed. A total of 112 papers were analyzed. Review of the literature showed that "KT is a process" and "implementing refined knowledge into a participatory context through a set of challenging activities" are the characteristics of KT. Moreover, to occur successfully, KT needs some necessary antecedents like an integrated source of knowledge, a receptive context, and preparedness. The main consequence of successful process is a change in four fields of healthcare, i.e. quality of patient care, professional practice, health system, and community. In addition, this study revealed some empirical referents which are helpful to evaluate the process. By aiming to portray a clear picture of KT, we highlighted its attributes, antecedents, consequences and empirical referents. Identifying the characteristics of this concept may resolve the existing ambiguities in its definition and boundaries thereby facilitate distinction from similar concepts. In addition, these findings can be used as a knowledge infrastructure for developing the KT-related models, theories, or tools.

Progress of Aircraft System Noise Assessment with Uncertainty Quantification for the Environmentally Responsible Aviation Project

NASA Technical Reports Server (NTRS)

Thomas, Russell H.; Burley, Casey L.; Guo, Yueping

2016-01-01

Aircraft system noise predictions have been performed for NASA modeled hybrid wing body aircraft advanced concepts with 2025 entry-into-service technology assumptions. The system noise predictions developed over a period from 2009 to 2016 as a result of improved modeling of the aircraft concepts, design changes, technology development, flight path modeling, and the use of extensive integrated system level experimental data. In addition, the system noise prediction models and process have been improved in many ways. An additional process is developed here for quantifying the uncertainty with a 95% confidence level. This uncertainty applies only to the aircraft system noise prediction process. For three points in time during this period, the vehicle designs, technologies, and noise prediction process are documented. For each of the three predictions, and with the information available at each of those points in time, the uncertainty is quantified using the direct Monte Carlo method with 10,000 simulations. For the prediction of cumulative noise of an advanced aircraft at the conceptual level of design, the total uncertainty band has been reduced from 12.2 to 9.6 EPNL dB. A value of 3.6 EPNL dB is proposed as the lower limit of uncertainty possible for the cumulative system noise prediction of an advanced aircraft concept.

Optical Information Processing for Aerospace Applications

NASA Technical Reports Server (NTRS)

1981-01-01

Current research in optical processing is reviewed. Its role in future aerospace systems is determined. The development of optical devices and components demonstrates that system concepts can be implemented in practical aerospace configurations.

Empirical evaluation of the Process Overview Measure for assessing situation awareness in process plants.

PubMed

Lau, Nathan; Jamieson, Greg A; Skraaning, Gyrd

2016-03-01

The Process Overview Measure is a query-based measure developed to assess operator situation awareness (SA) from monitoring process plants. A companion paper describes how the measure has been developed according to process plant properties and operator cognitive work. The Process Overview Measure demonstrated practicality, sensitivity, validity and reliability in two full-scope simulator experiments investigating dramatically different operational concepts. Practicality was assessed based on qualitative feedback of participants and researchers. The Process Overview Measure demonstrated sensitivity and validity by revealing significant effects of experimental manipulations that corroborated with other empirical results. The measure also demonstrated adequate inter-rater reliability and practicality for measuring SA in full-scope simulator settings based on data collected on process experts. Thus, full-scope simulator studies can employ the Process Overview Measure to reveal the impact of new control room technology and operational concepts on monitoring process plants. Practitioner Summary: The Process Overview Measure is a query-based measure that demonstrated practicality, sensitivity, validity and reliability for assessing operator situation awareness (SA) from monitoring process plants in representative settings.

Design of launch systems using continuous improvement process

NASA Technical Reports Server (NTRS)

Brown, Richard W.

1995-01-01

The purpose of this paper is to identify a systematic process for improving ground operations for future launch systems. This approach is based on the Total Quality Management (TQM) continuous improvement process. While the continuous improvement process is normally identified with making incremental changes to an existing system, it can be used on new systems if they use past experience as a knowledge base. In the case of the Reusable Launch Vehicle (RLV), the Space Shuttle operations provide many lessons. The TQM methodology used for this paper will be borrowed from the United States Air Force 'Quality Air Force' Program. There is a general overview of the continuous improvement process, with concentration on the formulation phase. During this phase critical analyses are conducted to determine the strategy and goals for the remaining development process. These analyses include analyzing the mission from the customers point of view, developing an operations concept for the future, assessing current capabilities and determining the gap to be closed between current capabilities and future needs and requirements. A brief analyses of the RLV, relative to the Space Shuttle, will be used to illustrate the concept. Using the continuous improvement design concept has many advantages. These include a customer oriented process which will develop a more marketable product and a better integration of operations and systems during the design phase. But, the use of TQM techniques will require changes, including more discipline in the design process and more emphasis on data gathering for operational systems. The benefits will far outweigh the additional effort.

Improving building performance using smart building concept: Benefit cost ratio comparison

NASA Astrophysics Data System (ADS)

Berawi, Mohammed Ali; Miraj, Perdana; Sayuti, Mustika Sari; Berawi, Abdur Rohim Boy

2017-11-01

Smart building concept is an implementation of technology developed in the construction industry throughout the world. However, the implementation of this concept is still below expectations due to various obstacles such as higher initial cost than a conventional concept and existing regulation siding with the lowest cost in the tender process. This research aims to develop intelligent building concept using value engineering approach to obtain added value regarding quality, efficiency, and innovation. The research combined quantitative and qualitative approach using questionnaire survey and value engineering method to achieve the research objectives. The research output will show additional functions regarding technology innovation that may increase the value of a building. This study shows that smart building concept requires higher initial cost, but produces lower operational and maintenance costs. Furthermore, it also confirms that benefit-cost ratio on the smart building was much higher than a conventional building, that is 1.99 to 0.88.

Virtual Vocabulary: Research and Learning in Lexical Processing

ERIC Educational Resources Information Center

Schuetze, Ulf; Weimer-Stuckmann, Gerlinde

2010-01-01

This article presents the concept development, research programming, and learning design of a lexical processing web application, Virtual Vocabulary, which was developed using theories in both cognitive psychology and second language acquisition (SLA). It is being tested with first-year students of German at the University of Victoria in Canada,…

Oak Ridge Computerized Hierarchical Information System (ORCHIS) status report, July 1973

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brooks, A.A.

1974-01-01

This report summarizes the concepts, software, and contents of the Oak Ridge Computerized Hierarchical Information System. This data analysis and text processing system was developed as an integrated, comprehensive information processing capability to meet the needs of an on-going multidisciplinary research and development organization. (auth)

The semiotics of gender.

PubMed

Van Buren, J

1992-01-01

The semiotics of gender are investigated in this article for the purpose of exploring the way that deep unconscious motives in relationship to cultural biases give rise to gender concepts. Theories of semiotic processes, including Jacques Lacan's concept of the psychoanalytic signifier, are explained briefly and applied to the signs of gender. The article concludes that gender concepts develop out of biology, unconscious feelings, and social patterning, and are not given, natural, and irrevocable.

Towards an Integrated Approach to Sexual Health Services: The Contribution of NICE Guidance on One-to-One Interventions to Prevent STIs and under 18 Conceptions

ERIC Educational Resources Information Center

Killoran, Amanda; McCormick, Geraldine

2010-01-01

Objective: To describe the development of the National Institute for Health and Clinical Excellence (NICE) evidence-based guidance on one-to-one interventions for prevention of STIs and under 18 conceptions, as a focus for an integrated approach to sexual health services. Method: Documentation of the process for developing NICE guidance that is…

Bootstrapping Processes in the Development of Students' Commonsense Matter Theories: Using Analogical Mappings, Thought Experiments, and Learning to Measure to Promote Conceptual Restructuring

ERIC Educational Resources Information Center

Smith, Carol L.

2007-01-01

This study explores whether the development of students' understanding of matter as something that occupies space and has weight involves conceptual change and restructuring rather than only simple belief revision. Based on an analysis of how the concepts in students' initial matter theory (henceforth MT1) may differ from the concepts in the…

Social justice: a concept analysis.

PubMed

Buettner-Schmidt, Kelly; Lobo, Marie L

2012-04-01

This article is a report of an analysis of the concept of social justice. Nursing's involvement in social justice has waned in the recent past. A resurgence of interest in nurses' roles about social justice requires a clear understanding of the concept. Literature for this concept analysis included English language articles from CINAHL, PubMed, and broad multidisciplinary literature databases, within and outside of health-related literature, for the years 1968-2010. Two books and appropriate websites were also reviewed. The reference lists of the identified sources were reviewed for additional sources. The authors used Wilsonian methods of concept analysis as a guide. An efficient, synthesized definition of social justice was developed, based on the identification of its attributes, antecedents and consequences that provides clarification of the concept. Social justice was defined as full participation in society and the balancing of benefits and burdens by all citizens, resulting in equitable living and a just ordering of society. Its attributes included: (1) fairness; (2) equity in the distribution of power, resources, and processes that affect the sufficiency of the social determinants of health; (3) just institutions, systems, structures, policies, and processes; (4) equity in human development, rights, and sustainability; and (5) sufficiency of well-being. Nurses can have an important influence on the health of people globally by reinvesting in social justice. Implications for research, education, practice and policy, such as development of a social justice framework and educational competencies are presented. © 2011 The Authors. Journal of Advanced Nursing © 2011 Blackwell Publishing Ltd.

The NASA X-Ray Mission Concepts Study

NASA Technical Reports Server (NTRS)

Petre, Robert; Ptak, A.; Bookbinder, J.; Garcia, M.; Smith, R.; Bautz, M.; Bregman, J.; Burrows, D.; Cash, W.; Jones-Forman, C.;

A Proposal of B to B Collaboration Process Model based on a Concept of Service and its Application to Energy Saving Service Business

NASA Astrophysics Data System (ADS)

Zhang, Qi; Kosaka, Michitaka; Shirahada, Kunio; Yabutani, Takashi

This paper proposes a new framework for B to B collaboration process based on a concept of service. Service value, which gives users satisfaction for provided services, depends on the situation, user characteristics, and user objectives in seeking the service. Vargo proposed Service Dominant Logic (SDL), which determines service value according to “value in use”. This concept illustrates the importance of the relationship between the service itself and its situation. This relationship is analogous to electro-magnetic field theory in physics. We developed the concept of service fields to create service value based on an analogy of the electro-magnetic field. By applying this concept to B to B collaboration, a model of service value co-creation in the collaboration can be formulated. Then, the collaboration can be described by 4 steps of KIKI model (Knowledge sharing related to service system, Identification of service field, Knowledge creation for new service idea, Implementation of service idea). As its application to B to B collaboration, the energy saving service business is reported to demonstrate the validity of the proposed collaboration model. This concept can be applied to make a collaboration process effective.

Terminological aspects of data elements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strehlow, R.A.; Kenworthey, W.H. Jr.; Schuldt, R.E.

1991-01-01

The creation and display of data comprise a process that involves a sequence of steps requiring both semantic and systems analysis. An essential early step in this process is the choice, definition, and naming of data element concepts and is followed by the specification of other needed data element concept attributes. The attributes and the values of data element concept remain associated with them from their birth as a concept to a generic data element that serves as a template for final application. Terminology is, therefore, centrally important to the entire data creation process. Smooth mapping from natural language tomore » a database is a critical aspect of database, and consequently, it requires terminology standardization from the outset of database work. In this paper the semantic aspects of data elements are analyzed and discussed. Seven kinds of data element concept information are considered and those that require terminological development and standardization are identified. The four terminological components of a data element are the hierarchical type of a concept, functional dependencies, schematas showing conceptual structures, and definition statements. These constitute the conventional role of terminology in database design. 12 refs., 8 figs., 1 tab.« less

Conceptual assessment in the biological sciences: a National Science Foundation-sponsored workshop.

PubMed

Michael, Joel

2007-12-01

Twenty-one biology teachers from a variety of disciplines (genetics, ecology, physiology, biochemistry, etc.) met at the University of Colorado to begin discussions about approaches to assessing students' conceptual understanding of biology. We considered what is meant by a "concept" in biology, what the important biological concepts might be, and how to go about developing assessment items about these concepts. We also began the task of creating a community of biologists interested in facilitating meaningful learning in biology. Input from the physiology education community is essential in the process of developing conceptual assessments for physiology.

A Unique Software System For Simulation-to-Flight Research

NASA Technical Reports Server (NTRS)

Chung, Victoria I.; Hutchinson, Brian K.

2001-01-01

"Simulation-to-Flight" is a research development concept to reduce costs and increase testing efficiency of future major aeronautical research efforts at NASA. The simulation-to-flight concept is achieved by using common software and hardware, procedures, and processes for both piloted-simulation and flight testing. This concept was applied to the design and development of two full-size transport simulators, a research system installed on a NASA B-757 airplane, and two supporting laboratories. This paper describes the software system that supports the simulation-to-flight facilities. Examples of various simulation-to-flight experimental applications were also provided.

The direct liquefaction proof of concept program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Comolli, A.G.; Lee, L.K.; Pradhan, V.R.

1995-12-31

The goal of the Proof of Concept (POC) Program is to develop Direct Coal Liquefaction and associated transitional technologies towards commercial readiness for economically producing premium liquid fuels from coal in an environmentally acceptable manner. The program focuses on developing the two-stage liquefaction (TSL) process by utilizing geographically strategic feedstocks, commercially feasible catalysts, new prototype equipment, and testing co-processing or alternate feedstocks and improved process configurations. Other high priority objectives include dispersed catalyst studies, demonstrating low rank coal liquefaction without solids deposition, improving distillate yields on a unit reactor volume basis, demonstrating ebullated bed operations while obtaining scale-up data, demonstratingmore » optimum catalyst consumption using new concepts (e.g. regeneration, cascading), producing premium products through on-line hydrotreating, demonstrating improved hydrogen utilization for low rank coals using novel heteroatom removal methods, defining and demonstrating two-stage product properties for upgrading; demonstrating efficient and economic solid separation methods, examining the merits of integrated coal cleaning, demonstrating co-processing, studying interactions between the preheater and first and second-stage reactors, improving process operability by testing and incorporating advanced equipment and instrumentation, and demonstrating operation with alternate coal feedstocks. During the past two years major PDU Proof of Concept runs were completed. POC-1 with Illinois No. 6 coal and POC-2 with Black Thunder sub-bituminous coal. Results from these operations are continuing under review and the products are being further refined and upgraded. This paper will update the results from these operations and discuss future plans for the POC program.« less

49 CFR 236.913 - Filing and approval of PSPs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... architectural concepts; the PSP describes a product that uses design or safety assurance concepts considered... the end of the system design review phase of product development and 180 days prior to planned implementation, inviting FRA to participate in the design review process and receive periodic briefings and...

49 CFR 236.913 - Filing and approval of PSPs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... architectural concepts; the PSP describes a product that uses design or safety assurance concepts considered... the end of the system design review phase of product development and 180 days prior to planned implementation, inviting FRA to participate in the design review process and receive periodic briefings and...

"Clicking through" or Learning Concepts

ERIC Educational Resources Information Center

Stidwell, Peter

2005-01-01

The author has developed an innovative science website resource that also shows how engineers use science. As well as addressing scientific facts and concepts, the resource also engages children in the process of scientific enquiry, using graph tools and data interpretation. Part of the resource helps children to understand that much of what they…

Concept Maps as Cognitive Visualizations of Writing Assignments

ERIC Educational Resources Information Center

Villalon, Jorge; Calvo, Rafael A.

2011-01-01

Writing assignments are ubiquitous in higher education. Writing develops not only communication skills, but also higher-level cognitive processes that facilitate deep learning. Cognitive visualizations, such as concept maps, can also be used as part of learning activities including as a form of scaffolding, or to trigger reflection by making…

Developmental Bias for Number Words in the Intraparietal Sulcus

ERIC Educational Resources Information Center

Lussier, Courtney A.; Cantlon, Jessica F.

2017-01-01

Children and adults show behavioral evidence of psychological overlap between their early, non-symbolic numerical concepts and their later-developing symbolic numerical concepts. An open question is to what extent the common cognitive signatures observed between different numerical notations are coupled with physical overlap in neural processes.…

The Infusion of Socio-Humanistic Concepts into Engineering Courses via Horizontal Integration of Subject Matter.

ERIC Educational Resources Information Center

Huckaba, Charles E.; Griffin, Ann

1983-01-01

Describes development of an interdisciplinary engineering course called "Social Aspects of the Technical Decision Process." Course content includes such interdisciplinary topics as alternative energy, ecology, and urban planning, which represent traditional engineering concepts. However, social and historical dimensions are built into topics.…

Integrating Strategic Planning Concepts into the Negotiating Process.

ERIC Educational Resources Information Center

Winer, Toby R.; Winer, Russell S.

1987-01-01

The purchase of a new telecommunications system at Vanderbilt University is described. By understanding conditions in which buyers generally obtain leverage over sellers in industries, it was possible to improve negotiating power. Strategic-planning concepts developed by Michael Porter in his book "Competitive Strategy" were used as a…

An Assessment of Students' Understanding of Ecosystem Concepts: Conflating Ecological Systems and Cycles

ERIC Educational Resources Information Center

Jordan, Rebecca; Gray, Steven; Demeter, Marylee; Lui, Lei; Hmelo-Silver, Cindy E.

2009-01-01

Teaching ecological concepts in schools is important in promoting natural science and environmental education for young learners. Developing educational programs is difficult, however, because of complicated ecological processes operating on multiple levels, the unlimited nature of potential system interactions (given the openness of systems), and…

Designing Professional Learning Communities through Understanding the Beliefs of Learning

ERIC Educational Resources Information Center

Ke, Jie; Kang, Rui; Liu, Di

2016-01-01

This study was designed to initiate the process of building professional development learning communities for pre-service math teachers through revealing those teachers' conceptions/beliefs of students' learning and their own learning in China. It examines Chinese pre-service math teachers' conceptions of student learning and their related…

Teaching Science in a Multicultural World.

ERIC Educational Resources Information Center

Offutt, Elizabeth Rhodes

This book is designed to be a source of ideas and motivation to encourage curiosity in children, provide opportunities to develop scientific processing skills, find out about cultures around the world, and explore science concepts. This resource incorporates multicultural literature and approaches into the teaching of science concepts in the…

Family and Consumer Sciences: A Facility Planning and Design Guide for School Systems.

ERIC Educational Resources Information Center

Maryland State Dept. of Education, Baltimore.

This document presents design concepts and considerations for planning and developing middle and high school family and consumer sciences education facilities. It includes discussions on family and consumer sciences education trends and the facility planning process. Design concepts explore multipurpose laboratories and spaces for food/nutrition…

Joint Urban Operations Joint Integrating Concept

DTIC Science & Technology

2007-07-23

24 7. Potential Risks of Adopting this Concept...stresses that urban combat operations are conducted only when required and that built-up areas are isolated and bypassed rather than risking a...Development, Applications (New York: George Braziller , 1968). 7 media, etc., institutions that typify urban society.15 The processes include all

Unmasking the Capability of Strategic Learning: A Validation Study

ERIC Educational Resources Information Center

Siren, Charlotta A.

2012-01-01

Purpose: The strategic learning perspective has attracted increased interest among strategic management scholars, yet the operationalisation of this concept is still in its infancy. The aim of this study is to develop a multidimensional understanding of the strategic learning process and to build an instrument to measure this concept.…

Sentence Frame Effects on Children's Category Judgments.

ERIC Educational Resources Information Center

Adams, Alison K.

Two studies of concept development and categorization among 1-, 2-, and 3-year-old children suggest that concept formation is a socially guided process involving convergence on an adult model. Convergence in labeling is an early strategy for shaping children's category boundaries, while later, more elaborate linguistic means are used to…

Freud's Psychosexual Stage Conception: A Developmental Metaphor for Counselors.

ERIC Educational Resources Information Center

Garcia, John L.

1995-01-01

Conceptualizes the counseling process and its outcome by comparing it metaphorically to Freud's psychosexual stage conception of personality development. Focuses on resemblances between oral, anal, phallic, latency, and genital stages. New meanings can be drawn from these resemblances, leading to fresh insight into the counseling relationship.…

Development of a representational conceptual evaluation in the first law of thermodynamics

NASA Astrophysics Data System (ADS)

Sriyansyah, S. P.; Suhandi, A.

2016-08-01

As part of an ongoing research to investigate student consistency in understanding the first law of thermodynamics, a representational conceptual evaluation (RCET) has been developed to assess student conceptual understanding, representational consistency, and scientific consistency in the introductory physics course. Previous physics education research findings were used to develop the test. RCET items were 30 items which designed as an isomorphic multiple-choice test with three different representations concerning the concept of work, heat, first law of thermodynamics, and its application in the thermodynamic processes. Here, we present preliminary measures of the validity and reliability of the instrument, including the classical test statistics. This instrument can be used to measure the intended concept in the first law of thermodynamics and it will give the consistent results with the ability to differentiate well between high-achieving students and low-achieving students and also students at different level. As well as measuring the effectiveness of the learning process in the concept of the first law of thermodynamics.

From Metacognition to Practice Cognition: The DNP e-Portfolio to Promote Integrated Learning.

PubMed

Anderson, Kelley M; DesLauriers, Patricia; Horvath, Catherine H; Slota, Margaret; Farley, Jean Nelson

2017-08-01

Educating Doctor of Nursing Practice (DNP) students for an increasingly complex health care environment requires novel applications of learning concepts and technology. A deliberate and thoughtful process is required to integrate concepts of the DNP program into practice paradigm changes to subsequently improve students' abilities to innovate solutions to complex practice problems. The authors constructed or participated in electronic portfolio development inspired by theories of metacognition and integrated learning. The objective was to develop DNP student's reflection, integration of concepts, and technological capabilities to foster the deliberative competencies related to the DNP Essentials and the foundations of the DNP program. The pedagogical process demonstrates how e-portfolios adapted into the doctoral-level curriculum for DNP students can address the Essentials and foster the development of metacognitive capabilities, which translates into practice changes. The authors suggest that this pedagogical approach has the potential to optimize reflective and deliberative competencies among DNP students. [J Nurs Educ. 2017;56(8):497-500.]. Copyright 2017, SLACK Incorporated.

Online teaching: "are you there, and do you care?".

PubMed

Mastel-Smith, Beth; Post, Jerri; Lake, Pamela

2015-03-01

Much of nursing education is moving online, and faculty must learn to deliver content and communicate differently. A hybrid model of concept development provided insight into faculty's perceptions and expressions of online caring presence. Phase one of concept development revealed many related concepts. Phase two involved (a) six qualitative interviews with doctoral-prepared nursing faculty who taught 100% online, and (b) Watson's Ten Caritas Processes were revised for application in online nursing education and used as a guide for course review. Four themes emerged from the interview data: (a) online teaching experiences, (b) similarities and differences between online and face-to-face teaching, (c) online presence, and (d) online caring presence. Course review suggested that faculty promoted helping-trusting-caring relationships and addressed individual learning needs. Phase three integrated findings from phases one and two; a comprehensive definition of online caring presence was developed. Recommendations regarding technology and communication skill acquisition and Caritas Process application are suggested. Copyright 2015, SLACK Incorporated.

Applications of immobilized catalysts in continuous flow processes.

PubMed

Kirschning, Andreas; Jas, Gerhard

2004-01-01

As part of the dramatic changes associated with automation in pharmaceutical and agrochemical research laboratories, the search for new technologies has become a major topic in the chemical community. Commonly, high-throughput chemistry is still carried out in batches whereas flow-through processes are rather restricted to production processes, despite the fact that the latter concept allows facile automation, reproducibility, safety, and process reliability. Indeed, methods and technologies are missing that allow rapid transfer from the research level to process development. Continuous flow processes are considered as a universal lever to overcome these restrictions and only recently, joint efforts between synthetic and polymer chemists and chemical engineers have resulted in the first continuous flow devices and microreactors which allow rapid preparation of compounds with minimum workup. Importantly, more and more developments combine the use of immobilized reagents and catalysts with the concept of structured continuous flow reactors. Consequently, the present article focuses on this new research field, which is located at the interface of continuous flow processes and solid-phase-bound catalysts.

Contingency theoretic methodology for agent-based web-oriented manufacturing systems

NASA Astrophysics Data System (ADS)

Durrett, John R.; Burnell, Lisa J.; Priest, John W.

2000-12-01

The development of distributed, agent-based, web-oriented, N-tier Information Systems (IS) must be supported by a design methodology capable of responding to the convergence of shifts in business process design, organizational structure, computing, and telecommunications infrastructures. We introduce a contingency theoretic model for the use of open, ubiquitous software infrastructure in the design of flexible organizational IS. Our basic premise is that developers should change in the way they view the software design process from a view toward the solution of a problem to one of the dynamic creation of teams of software components. We postulate that developing effective, efficient, flexible, component-based distributed software requires reconceptualizing the current development model. The basic concepts of distributed software design are merged with the environment-causes-structure relationship from contingency theory; the task-uncertainty of organizational- information-processing relationships from information processing theory; and the concept of inter-process dependencies from coordination theory. Software processes are considered as employees, groups of processes as software teams, and distributed systems as software organizations. Design techniques already used in the design of flexible business processes and well researched in the domain of the organizational sciences are presented. Guidelines that can be utilized in the creation of component-based distributed software will be discussed.

Reflective Practice: A Comparative Dimensional Analysis of the Concept in Nursing and Education Studies.

PubMed

Goulet, Marie-Hélène; Larue, Caroline; Alderson, Marie

2016-04-01

This paper reports on an analysis of the concept of reflective practice. Reflective practice, a concept borrowed from the field of education, is widely used in nursing. However, to date, no study has explored whether this appropriation has resulted in a definition of the concept specific to the nursing discipline. A sample comprised of 42 articles in the field of nursing drawn from the CINAHL database and 35 articles in education from the ERIC database (1989-2013) was analyzed. A concept analysis using the method proposed by Bowers and Schatzman was conducted to explore the differing meanings of reflective practice in nursing and education. In nursing, the dimensions of the concept differ depending on context. In the clinical context, the dimensions may be summarized as theory-practice gap, development, and caring; in training, as learning, guided process, and development; and in research, as knowledge, method, and social change. In education, the concept is also used in the contexts of training (the dimensions being development, deliberate review, emotions, and evaluation) and research (knowledge, temporal distance, and method). The humanist dimension in nursing thus reflects a use of the concept more specific to the discipline. The concept analysis helped clarify the meaning of reflective practice in nursing and its specific use in the discipline. This observation leads to a consideration of how the concept has developed since its appropriation by nursing; the adoption of a terminology particular to nursing may well be worth contemplating. © 2015 Wiley Periodicals, Inc.

A Dynamical System Approach Explaining the Process of Development by Introducing Different Time-scales.

PubMed

Hashemi Kamangar, Somayeh Sadat; Moradimanesh, Zahra; Mokhtari, Setareh; Bakouie, Fatemeh

2018-06-11

A developmental process can be described as changes through time within a complex dynamic system. The self-organized changes and emergent behaviour during development can be described and modeled as a dynamical system. We propose a dynamical system approach to answer the main question in human cognitive development i.e. the changes during development happens continuously or in discontinuous stages. Within this approach there is a concept; the size of time scales, which can be used to address the aforementioned question. We introduce a framework, by considering the concept of time-scale, in which "fast" and "slow" is defined by the size of time-scales. According to our suggested model, the overall pattern of development can be seen as one continuous function, with different time-scales in different time intervals.

The KAPTUR environment: An operations concept

NASA Technical Reports Server (NTRS)

1989-01-01

This report presents a high-level specification and operations concept for KAPTUR, a development environment based on knowledge acquisition for preservation of tradeoffs and underlying rationales. KAPTUR is intended to do what its name implies: to capture knowledge that is required or generated during the development process, but that is often lost because it is contextual, i.e., it does not appear directly in the end-products of development. Such knowledge includes issues that were raised during development, alternatives that were considered, and the reasons for choosing one alternative over others. Contextual information is usually only maintained as a memory in a developer's mind. As time passes, the memories become more vague and individuals become unavailable, and eventually the knowledge is lost. KAPTUR seeks to mitigate this process of attrition by recording and organizing contextual knowledge as it is generated.

The Concept of Ecologically Oriented Progress and Natural Resource Preservation

NASA Astrophysics Data System (ADS)

Gasanov, M. A.; Kolotov, K. A.; Demidenko, K. A.; Podgornaya, E. A.; Kadnikova, O. V.

2017-01-01

The most important issue of scientific and technological progress is considering the environment challenges of industrial development. It means that the progress must be ecologically oriented and environmentally friendly. The most adequate concept for the approach to the issue of “man - society - nature” relations is the ontology of the noosphere - the idea of a common space for human beings and nature. It presents an ideal example of an optimistic attitude towards the coordination between accelerating the scientific and technological development and natural resource saving. However, to maintain the balance between human needs and environmental processes determined by this concept, it is essential to include the lean production training into technological development of society.

Spacecraft Complexity Subfactors and Implications on Future Cost Growth

NASA Technical Reports Server (NTRS)

Leising, Charles J.; Wessen, Randii; Ellyin, Ray; Rosenberg, Leigh; Leising, Adam

2013-01-01

During the last ten years the Jet Propulsion Laboratory has used a set of cost-risk subfactors to independently estimate the magnitude of development risks that may not be covered in the high level cost models employed during early concept development. Within the last several years the Laboratory has also developed a scale of Concept Maturity Levels with associated criteria to quantitatively assess a concept's maturity. This latter effort has been helpful in determining whether a concept is mature enough for accurate costing but it does not provide any quantitative estimate of cost risk. Unfortunately today's missions are significantly more complex than when the original cost-risk subfactors were first formulated. Risks associated with complex missions are not being adequately evaluated and future cost growth is being underestimated. The risk subfactor process needed to be updated.

The Cognitive Science of Learning: Concepts and Strategies for the Educator and Learner.

PubMed

Weidman, Joseph; Baker, Keith

2015-12-01

Education is the fundamental process used to develop and maintain the professional skills of physicians. Medical students, residents, and fellows are expected to learn considerable amounts of information as they progress toward board certification. Established practitioners must continue to learn in an effort to remain up-to-date in their clinical realm. Those responsible for educating these populations endeavor to teach in a manner that is effective, efficient, and durable. The study of learning and performance is a subdivision of the field of cognitive science that focuses on how people interpret and process information and how they eventually develop mastery. A deeper understanding of how individuals learn can empower both educators and learners to be more effective in their endeavors. In this article, we review a number of concepts found in the literature on learning and performance. We address both the theoretical principles and the practical applications of each concept. Cognitive load theory, constructivism, and analogical transfer are concepts particularly beneficial to educators. An understanding of goal orientation, metacognition, retrieval, spaced learning, and deliberate practice will primarily benefit the learner. When these concepts are understood and incorporated into education and study, the effectiveness of learning is significantly improved.

A practitioner's guide to service development.

PubMed

Lees, Liz

2010-11-01

Service development and service improvement are complex concepts, but this should not prevent practitioners engaging in, or initiating, them. There is no set blueprint for service development so this article examines the process, describes the skills required, lists some change management tools and offers a guide to the stages involved. The article aims to demystify service development for those considering embarking on the process for the first time.

Horizontal Launch: A Versatile Concept for Assured Space Access

NASA Technical Reports Server (NTRS)

Bartolotta, Paul; Wilhite, Alan W.; Schaffer, Mark; Voland, Randall T.; Huebner, Larry

2011-01-01

The vision of horizontal launch is the capability to provide a mobile launch pad that can use existing aircraft runways, cruise above weather, loiter for mission instructions, and achieve precise placement for orbital intercept, rendezvous, or reconnaissance. Another compelling benefit of horizontal launch is that today s ground-based vertical launch pads are a single earthquake, hurricane, or terrorist attack away from disruption of critical U.S. launch capabilities. The study did not attempt to design a new system concept for horizontal launch, but rather focused on the refinement of many previously-studied horizontal launch concepts. Because of the large number of past horizontal launch studies, a process was developed to narrow the number of concepts through prescreening, screening, and evaluation of point designs. The refinement process was not intended to select the "best" concept, but rather to establish the feasibility of horizontal launch from a balanced assessment of figures of merit and to identify potential concepts that warrant further exploration.

Nursing professionalism: An evolutionary concept analysis

PubMed Central

Ghadirian, Fataneh; Salsali, Mahvash; Cheraghi, Mohammad Ali

2014-01-01

Background: Professionalism is an important feature of the professional jobs. Dynamic nature and the various interpretations of this term lead to multiple definitions of this concept. The aim of this paper is to identify the core attributes of the nursing professionalism. Materials and Methods: We followed Rodgers’ evolutionary method of concept analysis. Texts published in scientific databases about nursing professionalism between 1980 and 2011 were assessed. After applying the selection criteria, the final sample consisting of 4 books and 213 articles was selected, examined, and analyzed in depth. Two experts checked the process of analysis and monitored and reviewed them. Results: The analysis showed that nursing professionalism is determined by three attributes of cognitive, attitudinal, and psychomotor. In addition, the most important antecedents concepts were demographic, experiential, educational, environmental, and attitudinal factors. Conclusion: Nursing professionalism is an inevitable, complex, varied, and dynamic process. In this study, the importance, scope, and concept of professionalism in nursing, the concept of a beginning for further research and development, and expanding the nursing knowledge are explained and clarified. PMID:24554953

Space Station Mission Planning System (MPS) development study. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Klus, W. J.

1987-01-01

The basic objective of the Space Station (SS) Mission Planning System (MPS) Development Study was to define a baseline Space Station mission plan and the associated hardware and software requirements for the system. A detailed definition of the Spacelab (SL) payload mission planning process and SL Mission Integration Planning System (MIPS) software was derived. A baseline concept was developed for performing SS manned base payload mission planning, and it was consistent with current Space Station design/operations concepts and philosophies. The SS MPS software requirements were defined. Also, requirements for new software include candidate programs for the application of artificial intelligence techniques to capture and make more effective use of mission planning expertise. A SS MPS Software Development Plan was developed which phases efforts for the development software to implement the SS mission planning concept.

Advanced Extravehicular Protective Systems (AEPS) study

NASA Technical Reports Server (NTRS)

Williams, J. L.; Copeland, R. J.; Webbon, B. W.

1971-01-01

A description is given of life support subsystem concepts for advanced extravehicular protective systems (AEPS) intended for use on future orbital, lunar surface, and Mars surface missions in the late 1970's and 1980's. Primary interest was centered around the thermal control and carbon dioxide control subsystems because they offer the greatest potential for total weight savings. Emphasis was placed on the generation of regenerable subsystem concepts; however, partially regenerable and expendable concepts were also considered. Previously conceived and developed subsystem concepts were included in the study. Concepts were evaluated on the basis of subsystem weight and volume, and subsystem contribution to parent vehicle weight and volume, which included spares, regeneration equipment, expendables, expandables storage penalty, power penalty, and process heating or cooling penalty. Results are presented showing total weight and volume penalty as a function of total mission extravehicular activity (EVA) hours, and showing EVA weight and volume as a function of EVA duration. Subsystem concepts are recommended for each life support function, and secondary concepts which should be developed are also identified.

Feedbacks between geomorphology and biota controlling Earth surface processes and landforms: A review of foundation concepts and current understandings

NASA Astrophysics Data System (ADS)

Corenblit, Dov; Baas, Andreas C. W.; Bornette, Gudrun; Darrozes, José; Delmotte, Sébastien; Francis, Robert A.; Gurnell, Angela M.; Julien, Frédéric; Naiman, Robert J.; Steiger, Johannes

2011-06-01

This review article presents recent advances in the field of biogeomorphology related to the reciprocal coupling between Earth surface processes and landforms, and ecological and evolutionary processes. The aim is to present to the Earth Science community ecological and evolutionary concepts and associated recent conceptual developments for linking geomorphology and biota. The novelty of the proposed perspective is that (1) in the presence of geomorphologic-engineer species, which modify sediment and landform dynamics, natural selection operating at the scale of organisms may have consequences for the physical components of ecosystems, and particularly Earth surface processes and landforms; and (2) in return, these modifications of geomorphologic processes and landforms often feed back to the ecological characteristics of the ecosystem (structure and function) and thus to biological characteristics of engineer species and/or other species (adaptation and speciation). The main foundation concepts from ecology and evolutionary biology which have led only recently to an improved conception of landform dynamics in geomorphology are reviewed and discussed. The biogeomorphologic macroevolutionary insights proposed explicitly integrate geomorphologic niche-dimensions and processes within an ecosystem framework and reflect current theories of eco-evolutionary and ecological processes. Collectively, these lead to the definition of an integrated model describing the overall functioning of biogeomorphologic systems over ecological and evolutionary timescales.

Abstract concepts, language and sociality: from acquisition to inner speech.

PubMed

Borghi, Anna M; Barca, Laura; Binkofski, Ferdinand; Tummolini, Luca

2018-08-05

The problem of representation of abstract concepts, such as 'freedom' and 'justice', has become particularly crucial in recent years, owing to the increased success of embodied and grounded views of cognition. We will present a novel view on abstract concepts and abstract words. Since abstract concepts do not have single objects as referents, children and adults might rely more on input from others to learn them; we, therefore, suggest that linguistic and social experience play an important role for abstract concepts. We will discuss evidence obtained in our and other laboratories showing that processing of abstract concepts evokes linguistic interaction and social experiences, leading to the activation of the mouth motor system. We will discuss the possible mechanisms that underlie this activation. Mouth motor system activation can be due to re-enactment of the experience of conceptual acquisition, which occurred through the mediation of language. Alternatively, it could be due to the re-explanation of the word meaning, possibly through inner speech. Finally, it can be due to a metacognitive process revealing low confidence in the meaning of our concepts. This process induces in us the need to rely on others to ask/negotiate conceptual meaning. We conclude that with abstract concepts language works as a social tool: it extends our thinking abilities and pushes us to rely on others to integrate our knowledge.This article is part of the theme issue 'Varieties of abstract concepts: development, use, and representation in the brain'. © 2018 The Author(s).

Cultural factors in the origin and remediation of alternative conceptions in physics

NASA Astrophysics Data System (ADS)

Thijs, Gerard D.; van den Berg, Ed

1995-10-01

Over a wide range of subject areas students exhibit persistent conceptions contrary to the prevailing scientific concepts. The same alternative conceptions in physics are reported to exist across many countries, within a variety of cultural and environmental contexts. Also, many alternative conceptions show striking similarities with difficulties encountered in the historical development of physics. What is the reason for these similarities? Is intuitive science learned or triggered? And, if similar brain structures are responsible for common-sense theories, in what way then are cultural factors still important in the teaching-learning process? The influence of cultural factors will be discussed on the basis of literature available on this topic. Data collected by the authors in the Netherlands, Indonesia and countries in Africa are also taken into consideration. A distinction is proposed between alternative conceptions some of which may be universal and some dependent on culture. The same distinction is made regarding ways of reasoning and epistemology. It is suggested that the effectiveness of methods for the remediation of alternative conceptions is strongly influenced by cultural aspects of the teaching-learning process.

A shuttle and space station manipulator system for assembly, docking, maintenance, cargo handling and spacecraft retrieval (preliminary design). Volume 2: Concept development and selection

NASA Technical Reports Server (NTRS)

1972-01-01

The overall program background, the various system concepts considered, and the rationale for the selected design are described. The concepts for each subsystem are also described and compared. Details are given for the requirements, boom configuration and dynamics, actuators, man/machine interface and control, visual system, control system, environmental control and life support, data processing, and materials.

Concept inventing: a humanbecoming perspective on suffering.

PubMed

Doucet, Thomas

2014-04-01

Sufferance is a universal living experience. In view of the humanbecoming theoretical perspective, concept inventing is a way to expand understanding about a phenomenon of interest and to contribute to nursing knowledge development. This column offers a synthetic definition of sufferance in light of the concept inventing process. Sufferance is anguishing turbulence in weaving the cherished arising with luminous shifting. At the theoretical level, sufferance is imaging in the valuing connecting-separating of transforming.

SMM-chemokines: a class of unnatural synthetic molecules as chemical probes of chemokine receptor biology and leads for therapeutic development.

PubMed

Kumar, Santosh; Choi, Won-Tak; Dong, Chang-Zhi; Madani, Navid; Tian, Shaomin; Liu, Dongxiang; Wang, Youli; Pesavento, James; Wang, Jun; Fan, Xuejun; Yuan, Jian; Fritzsche, Wayne R; An, Jing; Sodroski, Joseph G; Richman, Douglas D; Huang, Ziwei

2006-01-01

Chemokines and their receptors play important roles in numerous physiological and pathological processes. To develop natural chemokines into receptor probes and inhibitors of pathological processes, the lack of chemokine-receptor selectivity must be overcome. Here, we apply chemical synthesis and the concept of modular modifications to generate unnatural synthetically and modularly modified (SMM)-chemokines that have high receptor selectivity and affinity, and reduced toxicity. A proof of the concept was shown by transforming the nonselective viral macrophage inflammatory protein-II into new analogs with enhanced selectivity and potency for CXCR4 or CCR5, two principal coreceptors for human immunodeficiency virus (HIV)-1 entry. These new analogs provided insights into receptor binding and signaling mechanisms and acted as potent HIV-1 inhibitors. These results support the concept of SMM-chemokines for studying and controlling the function of other chemokine receptors.

Estimating Logistics Support of Reusable Launch Vehicles During Conceptual Design

NASA Technical Reports Server (NTRS)

Morris, W. D.; White, N. H.; Davies, W. T.; Ebeling, C. E.

1997-01-01

Methods exist to define the logistics support requirements for new aircraft concepts but are not directly applicable to new launch vehicle concepts. In order to define the support requirements and to discriminate among new technologies and processing choices for these systems, NASA Langley Research Center (LaRC) is developing new analysis methods. This paper describes several methods under development, gives their current status, and discusses the benefits and limitations associated with their use.

Workshop on Mare Volcanism and Basalt Petrogenesis: Astounding Fundamental Concepts (AFC) Developed Over the Last Fifteen Years

NASA Technical Reports Server (NTRS)

Taylor, Lawrence A. (Editor); Longi, John (Editor)

1991-01-01

Papers presented at the workshop on mare volcanism and basalt petrogenesis are compiled. The discussion of recent ideas and concepts within the context of this workshop permitted to catch up on the developments over the last 15 years. The following subject areas were covered: (1) geological setting; (2) magma evolution and source regions; (3) magma source and ascent processes; and (4) history of volcanism.

SEDHI: development status of the Pléiades detection electronics

NASA Astrophysics Data System (ADS)

Dantes, Didier; Biffi, Jean-Marc; Neveu, Claude; Renard, Christophe

2017-11-01

In the framework of the Pléiades program, Alcatel Space is developping with CNES a new concept of Highly Integrated Detection Electronic Subsystem (SEDHI) which lead to very high gains in term of camera mass, volume and power consumption. This paper presents the design of this new concept and summarizes its main performances. The electrical, mechanical and thermal aspects of the SEDHI concept are described, including the basic technologies: panchromatic detector, multispectral detector, butting technology, ASIC for phase shift of detector clocks, ASIC for video processing, ASIC for phase trimming, hybrids, video modules... This concept and these technologies can be adapted to a large scale of missions and instruments. Design, performance and budgets of the subsystem are given for the Pléiades mission for which the SEDHI concept has been selected. The detailed performances of each critical component are provided, focusing on the most critical performances which have been obtained at this level of the Pléiades development.

[The concept of transcultural nursing: the analysis of its development in a Master degree dissertation].

PubMed

Queiroz, M V; Pagliuca, L M

2001-01-01

This is an analytic-bibliographic study which analyzes the concept of nursing in Leininger's Theory and the conceptual development of Nursing presented in the master's degree dissertation chosen for this study. Barnum's model for the analysis and evaluation of theories (Barnum 1998) was used, in relation to the clarity and consistency of the concept, together with questions about Nursing. The group of statements presented in Leininger's transcultural nursing concept and in the dissertation shows what is the focus of nursing and the intrinsic relation to the process of looking after somebody, which must be developed coherently with culture. It also demonstrates that Nursing has a body of specific professional knowledge which guides the care for the client, valuing one's individuality, subjectivity and way of seeing the world. The study made it possible to validate concepts taken from the Theory of Universality and Cultural Diversity of caring and their use in the research according to the analyzed criteria.

A National Educational Cultural Reform Model: Professionalizing the Principalship to Reform a Nation's Educational System

ERIC Educational Resources Information Center

Korem, Andrej; Shapiro, Arthur

2006-01-01

Globalizing processes in education are reflected in conceptions of "policy borrowing" and knowledge transfer. These processes tend to be associated with the notion of "developed" and "undeveloped" countries. The idea of a direct-line transfer may be limited in that each nation has developed a culture and numerous…

Education Research Handbook.

ERIC Educational Resources Information Center

Hitchings, Donna, Ed.; Wilson, Thomas C., Ed.

This handbook is designed as an introduction to the process of library research in the field of education. To illustrate the process, a sample topic is developed from a broad concept through a well-developed topic for a research paper. Following an overview of a successful research strategy, the chapters are organized in the order of a typical…

Evaluation of Intercultural Instructional Multimedia Material on Implicit Xenophobic Cognition: Short Time Effects on Implicit Information Processing

ERIC Educational Resources Information Center

Zumbach, Joerg; Schrangl, Gerhard; Mortensen, Chad; Moser, Stephanie

2016-01-01

Considering xenophobic attacks against foreigners and ethnic or religious motivated wars, there is a need for educational concepts to extinguish xenophobia. A model describing the cognitive processes involved in Xenophobic cognition was developed. Instructional multimedia material that discussed various forms of alienation was developed and…

Developing and Piloting the Planning for Facilitating Mathematical Processes and Strategies for Preschool Learners

ERIC Educational Resources Information Center

Botha, M.; Maree, J. G.; de Witt, M. W.

2005-01-01

From an early age young children actively engage informally in acquiring fundamental concepts and process skills that form a basis for mathematical understanding. Quite logically, questions will arise during planning when young children first encounter a more formal learning environment: what strategy should one use to develop mathematical …

Design and analysis of advanced flight planning concepts

NASA Technical Reports Server (NTRS)

Sorensen, John A.

1987-01-01

The objectives of this continuing effort are to develop and evaluate new algorithms and advanced concepts for flight management and flight planning. This includes the minimization of fuel or direct operating costs, the integration of the airborne flight management and ground-based flight planning processes, and the enhancement of future traffic management systems design. Flight management (FMS) concepts are for on-board profile computation and steering of transport aircraft in the vertical plane between a city pair and along a given horizontal path. Flight planning (FPS) concepts are for the pre-flight ground based computation of the three-dimensional reference trajectory that connects the city pair and specifies the horizontal path, fuel load, and weather profiles for initializing the FMS. As part of these objectives, a new computer program called EFPLAN has been developed and utilized to study advanced flight planning concepts. EFPLAN represents an experimental version of an FPS. It has been developed to generate reference flight plans compatible as input to an FMS and to provide various options for flight planning research. This report describes EFPLAN and the associated research conducted in its development.

Advanced space system concepts and their orbital support needs (1980 - 2000). Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Bekey, I.; Mayer, H. L.; Wolfe, M. G.

1976-01-01

The likely system concepts which might be representative of NASA and DoD space programs in the 1980-2000 time period were studied along with the programs' likely needs for major space transportation vehicles, orbital support vehicles, and technology developments which could be shared by the military and civilian space establishments in that time period. Such needs could then be used by NASA as an input in determining the nature of its long-range development plan. The approach used was to develop a list of possible space system concepts (initiatives) in parallel with a list of needs based on consideration of the likely environments and goals of the future. The two lists thus obtained represented what could be done, regardless of need; and what should be done, regardless of capability, respectively. A set of development program plans for space application concepts was then assembled, matching needs against capabilities, and the requirements of the space concepts for support vehicles, transportation, and technology were extracted. The process was pursued in parallel for likely military and civilian programs, and the common support needs thus identified.

Development of an ADP Training Program to Serve the EPA Data Processing Community.

DTIC Science & Technology

1976-07-29

divide, compute , perform and alter statements; data representation and conversion; table processing; and indexed sequential and random access file...processing. The course workshop will include the testing of coded exercises and problems on a computer system. CLASS SIZE: Individualized METHODS/CONDUCT...familiarization with computer concepts will be helpful. OBJECTIVES OF CURRICULUM After completing this course, the student should have developed a working

Perspectives for the information approach application to natural and artificial ecosystems investigation

NASA Astrophysics Data System (ADS)

Lankin, Yuliy

As a methodological matter, all modern conceptions of life development can be subdivided into the substrate (S), the energetic (E) and the informational (I). The S-conception is based on biochemical, genetic and morphological ideas. The E-conception deals with an idea of development of complicated open systems (COS) which are characterized by energy getting constantly from the outside, by improvement of substance cycles and as speeding-up and increasing of "power" of them as well, and by increasing of energy intensity transformation by the each structure of COS. The I-conception has been developing so far in the main within the frameworks of the traditional both cybernetic ideas and information theory that are convenient for many technical applications but are deficient for investigation of ecoand bio-systems. Situation was changed when the conception of adaptive systems (CAS) based on the ideas of ecology, biology and neurocybernetic (neuroinforamtic) had offered. As a consequence of this, the I-conception based on the CAS well accords with the S- and the E-conceptions and allows to hope to their combine into one the S + E + I conception that will include all virtues of the S-, the E-, and the I-conceptions and eliminate of their limitations. Thanks to relative easiness of hierarchic adaptive nonlinear models making using of the CAS, it is possible overcome effectively both of the problems as the "dimensionality problem" and the "loss of stability" as well for complicated models of ecosystems (CME). Optimization of energy and substance consumption process and adaptation of the CME to changes of current conditions are well realized in ranges given by goal function. A use adaptive networks (including neural nets) in frames of the CAS allows to realize any continuous function in control loops and at information processing. The considered features of the S + E + I proposed approach based on the CAS make it perspective for construction as biosphere models and artificial ecosystems as well for space and earth applications.

Automating expert role to determine design concept in Kansei Engineering

NASA Astrophysics Data System (ADS)

Lokman, Anitawati Mohd; Haron, Mohammad Bakri Che; Abidin, Siti Zaleha Zainal; Khalid, Noor Elaiza Abd

2016-02-01

Affect has become imperative in product quality. In affective design field, Kansei Engineering (KE) has been recognized as a technology that enables discovery of consumer's emotion and formulation of guide to design products that win consumers in the competitive market. Albeit powerful technology, there is no rule of thumb in its analysis and interpretation process. KE expertise is required to determine sets of related Kansei and the significant concept of emotion. Many research endeavors become handicapped with the limited number of available and accessible KE experts. This work is performed to simulate the role of experts with the use of Natphoric algorithm thus providing sound solution to the complexity and flexibility in KE. The algorithm is designed to learn the process by implementing training datasets taken from previous KE research works. A framework for automated KE is then designed to realize the development of automated KE system. A comparative analysis is performed to determine feasibility of the developed prototype to automate the process. The result shows that the significant Kansei is determined by manual KE implementation and the automated process is highly similar. KE research advocates will benefit this system to automatically determine significant design concepts.

Faculty-Student Caring Interaction in Nursing Education: An Integrative Review

PubMed Central

Salehian, Maryam; Heydari, Abbas; Aghebati, Nahid; Karimi Moonaghi, Hossein

2017-01-01

Introduction: Faculty- student caring relationship in nursing education has been offered as enhancing students’ learning experiences to care , desire to care for others and self-actu­alization. This review therefore was carried out to analyze faculty-student caring interactions in nursing education. Methods: This concept analysis of caring in the nursing education was conducted based on Broom methodology of integrative review. The literature was consisted of two books from two known theorists, and 47 relevant articles. They retrieved from English data bases including MEDLINE, CINAHL, ERIC, SCOPUS, and SID, with based on the keywords of caring and "nursing education", during the period 2005-2014. Results: Caring in nursing education refers to faculty-student interaction based on ethical and human values. The development of values and moral principles in education, flexibility in educational processes, application of objective patterns in learning, and dynamism in educational processes are identified as caring concept attributes in teaching-learning process. This requires environmental support, constant human relationship, and knowing. Internalization of values, achieving self-esteem, peace, and towards human evolution were the main achievements of the concept of caring in nursing education. Conclusion: The details obtained from the dimensions of "caring" concept in this study could be utilized by nursing education researchers and designers in order to develop content and structure for educational programs. PMID:28971076

Faculty-Student Caring Interaction in Nursing Education: An Integrative Review.

PubMed

Salehian, Maryam; Heydari, Abbas; Aghebati, Nahid; Karimi Moonaghi, Hossein

2017-09-01

Introduction: Faculty- student caring relationship in nursing education has been offered as enhancing students' learning experiences to care , desire to care for others and self-actu-alization. This review therefore was carried out to analyze faculty-student caring interactions in nursing education. Methods: This concept analysis of caring in the nursing education was conducted based on Broom methodology of integrative review. The literature was consisted of two books from two known theorists, and 47 relevant articles. They retrieved from English data bases including MEDLINE, CINAHL, ERIC, SCOPUS, and SID, with based on the keywords of caring and "nursing education", during the period 2005-2014. Results: Caring in nursing education refers to faculty-student interaction based on ethical and human values. The development of values and moral principles in education, flexibility in educational processes, application of objective patterns in learning, and dynamism in educational processes are identified as caring concept attributes in teaching-learning process. This requires environmental support, constant human relationship, and knowing. Internalization of values, achieving self-esteem, peace, and towards human evolution were the main achievements of the concept of caring in nursing education. Conclusion: The details obtained from the dimensions of "caring" concept in this study could be utilized by nursing education researchers and designers in order to develop content and structure for educational programs.

Using ontology-based semantic similarity to facilitate the article screening process for systematic reviews.

PubMed

Ji, Xiaonan; Ritter, Alan; Yen, Po-Yin

2017-05-01

Systematic Reviews (SRs) are utilized to summarize evidence from high quality studies and are considered the preferred source of evidence-based practice (EBP). However, conducting SRs can be time and labor intensive due to the high cost of article screening. In previous studies, we demonstrated utilizing established (lexical) article relationships to facilitate the identification of relevant articles in an efficient and effective manner. Here we propose to enhance article relationships with background semantic knowledge derived from Unified Medical Language System (UMLS) concepts and ontologies. We developed a pipelined semantic concepts representation process to represent articles from an SR into an optimized and enriched semantic space of UMLS concepts. Throughout the process, we leveraged concepts and concept relations encoded in biomedical ontologies (SNOMED-CT and MeSH) within the UMLS framework to prompt concept features of each article. Article relationships (similarities) were established and represented as a semantic article network, which was readily applied to assist with the article screening process. We incorporated the concept of active learning to simulate an interactive article recommendation process, and evaluated the performance on 15 completed SRs. We used work saved over sampling at 95% recall (WSS95) as the performance measure. We compared the WSS95 performance of our ontology-based semantic approach to existing lexical feature approaches and corpus-based semantic approaches, and found that we had better WSS95 in most SRs. We also had the highest average WSS95 of 43.81% and the highest total WSS95 of 657.18%. We demonstrated using ontology-based semantics to facilitate the identification of relevant articles for SRs. Effective concepts and concept relations derived from UMLS ontologies can be utilized to establish article semantic relationships. Our approach provided a promising performance and can easily apply to any SR topics in the biomedical domain with generalizability. Copyright © 2017 Elsevier Inc. All rights reserved.

Probing concept of critical thinking in nursing education in Iran: a concept analysis.

PubMed

Tajvidi, Mansooreh; Ghiyasvandian, Shahrzad; Salsali, Mahvash

2014-06-01

Given the wide disagreement over the definition of critical thinking in different disciplines, defining and standardizing the concept according to the discipline of nursing is essential. Moreover, there is limited scientific evidence regarding critical thinking in the context of nursing in Iran. The aim of this study was to analyze and clarify the concept of critical thinking in nursing education in Iran. We employed the hybrid model to define the concept of critical thinking. The hybrid model has three interconnected phases--the theoretical phase, the fieldwork phase, and the final analytic phase. In the theoretical phase, we searched the online scientific databases (such as Elsevier, Wiley, CINAHL, Proquest, Ovid, and Springer as well as Iranian databases such as SID, Magiran, and Iranmedex). In the fieldwork phase, a purposive sample of 17 nursing faculties, PhD students, clinical instructors, and clinical nurses was recruited. Participants were interviewed by using an interview guide. In the analytical phase we compared the data from the theoretical and the fieldwork phases. The concept of critical thinking had many different antecedents, attributes, and consequences. Antecedents, attributes, and consequences of critical thinking concept identified in the theoretical phase were in some ways different and in some way similar to antecedents, attributes, and consequences identified in the fieldwork phase. Finally critical thinking in nursing education in Iran was clarified. Critical thinking is a logical, situational, purposive, and outcome-oriented thinking process. It is an acquired and evolving ability which develops individually. Such thinking process could lead to the professional accountability, personal development, God's consent, conscience appeasement, and personality development. Copyright © 2014. Published by Elsevier B.V.

Propellant injection systems and processes

NASA Technical Reports Server (NTRS)

Ito, Jackson I.

1995-01-01

The previous 'Art of Injector Design' is maturing and merging with the more systematic 'Science of Combustion Device Analysis.' This technology can be based upon observation, correlation, experimentation and ultimately analytical modeling based upon basic engineering principles. This methodology is more systematic and far superior to the historical injector design process of 'Trial and Error' or blindly 'Copying Past Successes.' The benefit of such an approach is to be able to rank candidate design concepts for relative probability of success or technical risk in all the important combustion device design requirements and combustion process development risk categories before committing to an engine development program. Even if a single analytical design concept cannot be developed to predict satisfying all requirements simultaneously, a series of risk mitigation key enabling technologies can be identified for early resolution. Lower cost subscale or laboratory experimentation to demonstrate proof of principle, critical instrumentation requirements, and design discriminating test plans can be developed based on the physical insight provided by these analyses.

Seaford School District Science Guide.

ERIC Educational Resources Information Center

Del Mod System, Dover, DE.

This monography presents the concepts to be presented, the psychomotor skills through to pertain to all the concepts, the process skills required, and the values and attitudes hoped to be developed for a science curriculum, K through 8. A list of suggested field trips accompanies each syllabus. At the kindergarten through grade 6 levels,…

Application of LAC-type processes and concepts to nonrecreation management issues in protected areas

Treesearch

Linda Merigliano; David N. Cole; David J. Parsons

1997-01-01

When Limits of Acceptable Change concepts are applied to nonrecreational issues, two primary problems are encountered: (1) developing zoning schemes which are compatible when multiple issues are addressed, and (2) defining the desired condition and establishing measurable standards for ecosystem attributes which change in unpredictable ways. Approaches to overcome...

Peer Feedback Practice in EFL Tertiary Writing Classes

ERIC Educational Resources Information Center

Nguyen, Ha Thi

2016-01-01

Peer feedback plays a pivotal role in stimulating students' participation in L2 writing, which has the potential to develop students' writing skills. The concept of metacognition has also been examined to facilitate learner writers in their learning process. As such, this study drawing upon the concept of metacognition explores the implementation…

The Magnitude Response Learning Tool for DSP Education: A Case Study

ERIC Educational Resources Information Center

Kulmer, Florian; Wurzer, Christian Gun; Geiger, Bernhard C.

2016-01-01

Many concepts in digital signal processing are intuitive, despite being mathematically challenging. The lecturer not only has to teach the complicated math but should also help students develop intuition about the concept. To aid the lecturer in this task, the Magnitude Response Learning Tool has been introduced, a computer-based learning game…

Mind Map Marketing: A Creative Approach in Developing Marketing Skills

ERIC Educational Resources Information Center

Eriksson, Lars Torsten; Hauer, Amie M.

2004-01-01

In this conceptual article, the authors describe an alternative course structure that joins learning key marketing concepts to creative problem solving. The authors describe an approach using a convergent-divergent-convergent (CDC) process: key concepts are first derived from case material to be organized in a marketing matrix, which is then used…

This idea worth anything? Mechanics of technology transfer.

PubMed

Goodson, J Max

2006-01-01

The path from a proven scientific idea to a commercially viable product is seldom easy. It often requires ten or more years and millions of dollars. The essential elements include a creative concept that has been proven sound, identification of the commercial applicability of the concept, and financing and management of the development process.

Synthetic cognitive development. Where intelligence comes from

NASA Astrophysics Data System (ADS)

Weinbaum (Weaver), D.; Veitas, V.

2017-01-01

The human cognitive system is a remarkable exemplar of a general intelligent system whose competence is not confined to a specific problem domain. Evidently, general cognitive competences are a product of a prolonged and complex process of cognitive development. Therefore, the process of cognitive development is a primary key to understanding the emergence of intelligent behavior. This paper develops the theoretical foundations for a model that generalizes the process of cognitive development. The model aims to provide a realistic scheme for the synthesis of scalable cognitive systems with an open-ended range of capabilities. Major concepts and theories of human cognitive development are introduced and briefly explored, focusing on the enactive approach to cognition and the concept of sense-making. The initial scheme of human cognitive development is then generalized by introducing the philosophy of individuation and the abstract mechanism of transduction. The theory of individuation provides the ground for the necessary paradigmatic shift from cognitive systems as given products to cognitive development as a formative process of self-organization. Next, the conceptual model is specified as a scalable scheme of networks of agents. The mechanisms of individuation are formulated in context-independent information theoretical terms. Finally, the paper discusses two concrete aspects of the generative model - mechanisms of transduction and value modulating systems. These are topics of further research towards an implementable architecture.

MORICE--new technology for mechanical oil recovery in ice infested waters.

PubMed

Jensen, Hans V; Mullin, Joseph V

2003-01-01

Mechanical oil recovery in ice infested waters (MORICE) was initiated in 1995 to develop technology for the recovery of oil spills in ice. It has been a multinational effort involving Norwegian, Canadian, American and German organizations and researchers. Through a stepwise approach with the development organized in six separate phases, laboratory tests and field experiments have been conducted to study various ideas and concepts, and to refine the ideas that were considered to have the best potential for removing oil in ice. Put together in one unit, these concepts included ice processing equipment and two alternative oil recovery units installed on a work platform. In January 2002, the final oil and ice testing with MORICE concepts was conducted at the Ohmsett test facility in Leonardo, New Jersey. The unit has been referred to as a harbor version to indicate the size and operating conditions, but the concepts could be scaled up to increase the capacity of oil and ice processing. For heavier ice conditions it would also be necessary to increase the overall strength.

Translational science: past, present, and future.

PubMed

Curry, Stephen H

2008-02-01

The concept of translational science is at least 15 years old. However, in its most recent incarnation, it represents the identification of a funding category designed to encourage academic participation in a critical stage of the drug discovery and product development process. It is hoped that this will make the process both shorter and more efficient. In this review, the author first considers the historical development of the pharmaceutical R&D process. The place of translational science in the process, the scientific techniques involved, and aspects of the business environment necessary for its success are then considered. Translational science does not displace preclinical development. Both concepts are relevant to the paramount importance of successfully and expeditiously bridging the gap between preclinical science and clinical testing, "from bench to bedside." Translational science is particularly likely to stimulate biomarker research in the universities and related business community and will probably give a modest boost to early clinical testing and commercialization of discoveries within the academic setting. Whether there will be a consequent improvement in the quality and efficiency of the overall process remains to be seen.

Alternative conceptions of introductory geoscience students and a method to decrease them

NASA Astrophysics Data System (ADS)

Kortz, Karen Melissa

College students often leave introductory geoscience courses with alternative conceptions, and these alternative conceptions are a barrier to their grasp of geological conceptions. This dissertation clarifies the problem and suggests pedagogical strategies for correcting it. It is an integration of research on students' conceptions of geoscience topics with the application of that knowledge to the development of materials to change these conceptions to be more scientifically accurate. This research identifies and documents alternative conceptions students have in several key geoscience topics and the consequences of these alternative conception in terms of preventing understanding. After documenting the alternative conceptions, I investigate their sources. In addition, I develop ways in which the alternative conceptions can be addressed in classrooms in terms of non-traditional teaching techniques, and I assess the success of these methods. Chapter 1 addresses alternative conceptions in general introductory geoscience topics. I use known student alternative conceptions to develop a series of interactive materials to help reduce students' alternative conceptions. After their development, I assess the efficacy of these materials, and my research indicates that they are successful in helping students better learn the geoscience concepts. Chapter 2 deals with a particularly difficult topic for students---that of phylogenetic systematics. Students have an intuitive way of categorizing organisms, and this categorization is different from the system used by experts within the field. My investigation indicates the conceptual change required of students to fully understand the topic leads to great difficulties with learning. Drawing upon results of the research in Chapter 1, I developed and assessed interactive materials to help students better understand phylogenetic systematics. Using the insight gained from Chapters 1 and 2, Chapters 3 and 4 further examine students' conceptions in an area critical to understanding geology: rocks and their formation. My research indicates that students view rocks as objects independent from the processes that form and change them. In addition, I document students' alternative conceptions of rocks. Using these alternative conceptions, I look more deeply into the underlying factors that cause the difficulties students have with learning rocks, their formation, and their importance to the geosciences.

From Data to Knowledge: GEOSS experience and the GEOSS Knowledge Base contribution to the GCI

NASA Astrophysics Data System (ADS)

Santoro, M.; Nativi, S.; Mazzetti, P., Sr.; Plag, H. P.

2016-12-01

According to systems theory, data is raw, it simply exists and has no significance beyond its existence; while, information is data that has been given meaning by way of relational connection. The appropriate collection of information, such that it contributes to understanding, is a process of knowledge creation.The Global Earth Observation System of Systems (GEOSS) developed by the Group on Earth Observations (GEO) is a set of coordinated, independent Earth observation, information and processing systems that interact and provide access to diverse information for a broad range of users in both public and private sectors. GEOSS links these systems to strengthen the monitoring of the state of the Earth. In the past ten years, the development of GEOSS has taught several lessons dealing with the need to move from (open) data to information and knowledge sharing. Advanced user-focused services require to move from a data-driven framework to a knowledge sharing platform. Such a platform needs to manage information and knowledge, in addition to datasets linked to them. For this scope, GEO has launched a specific task called "GEOSS Knowledge Base", which deals with resources, like user requirements, Sustainable Development Goals (SDGs), observation and processing ontologies, publications, guidelines, best practices, business processes/algorithms, definition of advanced concepts like Essential Variables (EVs), indicators, strategic goals, etc. In turn, information and knowledge (e.g. guidelines, best practices, user requirements, business processes, algorithms, etc.) can be used to generate additional information and knowledge from shared datasets. To fully utilize and leverage the GEOSS Knowledge Base, the current GEOSS Common Infrastructure (GCI) model will be extended and advanced to consider important concepts and implementation artifacts, such as data processing services and environmental/economic models as well as EVs, Primary Indicators, and SDGs. The new GCI model will link these concepts to the present dataset, observation and sensor concepts, enabling a set of very important new capabilities to be offered to GEOSS users.

Roll splitting as an alternative intermediate process for wood fuel

Treesearch

Paul E. Barnett; Donald L. Sirois

1985-01-01

In an effort to develop mobile equipment for harvesting and processing woody biomass from power line rights-of-way and precommerial thinnings, numerous alternative concepts were evaluated by Tennessee Valley Authority's Timber Harvesting Project.

41 CFR 102-76.50 - What is sustainable development?

Code of Federal Regulations, 2010 CFR

2010-07-01

... development means integrating the decision-making process across the organization, so that every decision is made to promote the greatest long-term benefits. It means eliminating the concept of waste and building...

Unlocking the riddle of time in learning disability.

PubMed

Owen, Ann L; Wilson, Rebecca R

2006-03-01

People with learning disabilities often have difficulties understanding abstract concepts such as the concept of time yet research in this area is scarce. Not only does the development of an understanding of the concept of time enable us to predict future events, order past events and give us a sense of control over current events, it also serves to contribute to the very essence of our understanding of a sense of ourselves. It seems reasonable to suggest that the converse may be true for people who are not able to develop this concept. Time perception and understanding are complex cognitive processes. It is suggested that facilitating this development and managing associated difficulties may be achieved by focusing on the practical applications of time in everyday life. Improving time perception abilities may reduce feelings of powerlessness and anxiety and increase feelings of self-efficacy but research is needed to evaluate this.

Rest

PubMed Central

2015-01-01

Rest is a health-related phenomenon. Researchers have explored the phenomenon of rest, but further concept development is recommended. The aim of my study was to develop and describe a concept of rest, from interviews with a total of 63 participants about their lived experiences of rest. I performed the developing process in two stages: first with descriptive phenomenology and second with a hermeneutic approach. The concept of rest is comprised of the essences of both rest and “non-rest,” and there is a current movement between these two conditions in peoples’ lives. The essence of rest is being in harmony in motivation, feeling, and action. The essence of non-rest is being in disharmony in motivation, feeling, and action. The essences reveal some meaning constituents. Health care professionals and researchers can use the concept as a frame of reference in health care praxis and in applied research. PMID:28462307

Operational Interoperability Challenges on the Example of GEOSS and WIS

NASA Astrophysics Data System (ADS)

Heene, M.; Buesselberg, T.; Schroeder, D.; Brotzer, A.; Nativi, S.

2015-12-01

The following poster highlights the operational interoperability challenges on the example of Global Earth Observation System of Systems (GEOSS) and World Meteorological Organization Information System (WIS). At the heart of both systems is a catalogue of earth observation data, products and services but with different metadata management concepts. While in WIS a strong governance with an own metadata profile for the hundreds of thousands metadata records exists, GEOSS adopted a more open approach for the ten million records. Furthermore, the development of WIS - as an operational system - follows a roadmap with committed downwards compatibility while the GEOSS development process is more agile. The poster discusses how the interoperability can be reached for the different metadata management concepts and how a proxy concept helps to couple two different systems which follow a different development methodology. Furthermore, the poster highlights the importance of monitoring and backup concepts as a verification method for operational interoperability.

Knowledge translation in health care: a concept analysis

PubMed Central

khoddam, Homeira; Mehrdad, Neda; Peyrovi, Hamid; Kitson, Alison L; Schultz, Timothy J; Athlin, Asa Muntlin

2014-01-01

Background: Although knowledge translation is one of the most widely used concepts in health and medical literature, there is a sense of ambiguity and confusion over its definition. The aim of this paper is to clarify the characteristics of KT. This will assist the theoretical development of it and shape its implementation into the health care system Methods: Walker and Avant’s framework was used to analyze the concept and the related literature published between 2000 and 2010 was reviewed. A total of 112 papers were analyzed. Results: Review of the literature showed that "KT is a process" and "implementing refined knowledge into a participatory context through a set of challenging activities" are the characteristics of KT. Moreover, to occur successfully, KT needs some necessary antecedents like an integrated source of knowledge, a receptive context, and preparedness. The main consequence of successful process is a change in four fields of healthcare, i.e. quality of patient care, professional practice, health system, and community. In addition, this study revealed some empirical referents which are helpful to evaluate the process. Conclusion: By aiming to portray a clear picture of KT, we highlighted its attributes, antecedents, consequences and empirical referents. Identifying the characteristics of this concept may resolve the existing ambiguities in its definition and boundaries thereby facilitate distinction from similar concepts. In addition, these findings can be used as a knowledge infrastructure for developing the KT-related models, theories, or tools. PMID:25664299

Molybdenum-base cermet fuel development

NASA Astrophysics Data System (ADS)

Pilger, James P.; Gurwell, William E.; Moss, Ronald W.; White, George D.; Seifert, David A.

Development of a multimegawatt (MMW) space nuclear power system requires identification and resolution of several technical feasibility issues before selecting one or more promising system concepts. Demonstration of reactor fuel fabrication technology is required for cermet-fueled reactor concepts. The MMW reactor fuel development activity at Pacific Northwest Laboratory (PNL) is focused on producing a molybdenum-matrix uranium-nitride (UN) fueled cermte. This cermet is to have a high matrix density (greater than or equal to 95 percent) for high strength and high thermal conductance coupled with a high particle (UN) porosity (approximately 25 percent) for retention of released fission gas at high burnup. Fabrication process development involves the use of porous TiN microspheres as surrogate fuel material until porous Un microspheres become available. Process development was conducted in the areas of microsphere synthesis, particle sealing/coating, and high-energy-rate forming (HERF) and the vacuum hot press consolidation techniques. This paper summarizes the status of these activities.

Heuristics Applied in the Development of Advanced Space Mission Concepts

NASA Technical Reports Server (NTRS)

Nilsen, Erik N.

1998-01-01

Advanced mission studies are the first step in determining the feasibility of a given space exploration concept. A space scientist develops a science goal in the exploration of space. This may be a new observation method, a new instrument or a mission concept to explore a solar system body. In order to determine the feasibility of a deep space mission, a concept study is convened to determine the technology needs and estimated cost of performing that mission. Heuristics are one method of defining viable mission and systems architectures that can be assessed for technology readiness and cost. Developing a viable architecture depends to a large extent upon extending the existing body of knowledge, and applying it in new and novel ways. These heuristics have evolved over time to include methods for estimating technical complexity, technology development, cost modeling and mission risk in the unique context of deep space missions. This paper examines the processes involved in performing these advanced concepts studies, and analyzes the application of heuristics in the development of an advanced in-situ planetary mission. The Venus Surface Sample Return mission study provides a context for the examination of the heuristics applied in the development of the mission and systems architecture. This study is illustrative of the effort involved in the initial assessment of an advance mission concept, and the knowledge and tools that are applied.

Development and Evaluation of Sensor Concepts for Ageless Aerospace Vehicles: Report 3 - Design of the Concept Demonstrator

NASA Technical Reports Server (NTRS)

Abbott, David; Ables, Jon; Batten, Adam; Carpenter, David; Collings, Tony; Doyle, Briony; Dunlop, John; Edwards, Graeme; Farmer, Tony; Gaffney, Bruce;

Integrated Aerodynamic/Structural/Dynamic Analyses of Aircraft with Large Shape Changes

NASA Technical Reports Server (NTRS)

Samareh, Jamshid A.; Chwalowski, Pawel; Horta, Lucas G.; Piatak, David J.; McGowan, Anna-Maria R.

2007-01-01

The conceptual and preliminary design processes for aircraft with large shape changes are generally difficult and time-consuming, and the processes are often customized for a specific shape change concept to streamline the vehicle design effort. Accordingly, several existing reports show excellent results of assessing a particular shape change concept or perturbations of a concept. The goal of the current effort was to develop a multidisciplinary analysis tool and process that would enable an aircraft designer to assess several very different morphing concepts early in the design phase and yet obtain second-order performance results so that design decisions can be made with better confidence. The approach uses an efficient parametric model formulation that allows automatic model generation for systems undergoing radical shape changes as a function of aerodynamic parameters, geometry parameters, and shape change parameters. In contrast to other more self-contained approaches, the approach utilizes off-the-shelf analysis modules to reduce development time and to make it accessible to many users. Because the analysis is loosely coupled, discipline modules like a multibody code can be easily swapped for other modules with similar capabilities. One of the advantages of this loosely coupled system is the ability to use the medium-to high-fidelity tools early in the design stages when the information can significantly influence and improve overall vehicle design. Data transfer among the analysis modules are based on an accurate and automated general purpose data transfer tool. In general, setup time for the integrated system presented in this paper is 2-4 days for simple shape change concepts and 1-2 weeks for more mechanically complicated concepts. Some of the key elements briefly described in the paper include parametric model development, aerodynamic database generation, multibody analysis, and the required software modules as well as examples for a telescoping wing, a folding wing, and a bat-like wing.

Two-color holography concept (T-CHI)

NASA Technical Reports Server (NTRS)

Vikram, C. S.; Caulfield, H. J.; Workman, G. L.; Trolinger, J. D.; Wood, C. P.; Clark, R. L.; Kathman, A. D.; Ruggiero, R. M.

1990-01-01

The Material Processing in the Space Program of NASA-MSFC was active in developing numerous optical techniques for the characterization of fluids in the vicinity of various materials during crystallization and/or solidification. Two-color holographic interferometry demonstrates that temperature and concentration separation in transparent (T-CHI) model systems is possible. The experiments were performed for particular (succinonitrile) systems. Several solutions are possible in Microgravity Sciences and Applications (MSA) experiments on future Shuttle missions. The theory of the T-CHI concept is evaluated. Although particular cases are used for explanations, the concepts developed will be universal. A breadboard system design is also presented for ultimate fabrication and testing of theoretical findings. New developments in holography involving optical fibers and diode lasers are also incorporated.

The Operations Security Concept for Future ESA Earth Observation Missions

NASA Astrophysics Data System (ADS)

Fischer, D.; Bargellini, P.; Merri, M.

2008-08-01

Next-generation European earth observation missions will play a critical role in public safety and security infrastructures. This makes it necessary for ESA to protect the communication infrastructure of these missions in order to guarantee their service availability. In this paper, we discuss the development process for a generic earth observation security concept. This concept has been developed as part of a GMES Flight Operation Segment security study with the objective to analyse and select a number of high level security requirements for the missions. Further, we studied the impact of an implementation for these requirements on the operational infrastructure of current earth observation missions.

Systems definition space based power conversion systems: Executive summary

NASA Technical Reports Server (NTRS)

1977-01-01

Potential space-located systems for the generation of electrical power for use on earth were investigated. These systems were of three basic types: (1) systems producing electrical power from solar energy; (2) systems producing electrical power from nuclear reactors; (3) systems for augmenting ground-based solar power plants by orbital sunlight reflectors. Configurations implementing these concepts were developed through an optimization process intended to yield the lowest cost for each. A complete program was developed for each concept, identifying required production rates, quantities of launches, required facilities, etc. Each program was costed in order to provide the electric power cost appropriate to each concept.

Manufacturing concepts and development trends in the industrial production of microelectromechanical systems

NASA Astrophysics Data System (ADS)

Schuenemann, Matthias; Grimme, Ralf; Kaufmann, Thomas; Schwaab, Gerhard; Baeder, Uwe; Schaefer, Wolfgang; Dorner, Johann

1998-01-01

During the past few years, remarkable affords have been made for the realization of microscale sensors, actuators and microelectromechanical system. Due to advances in solid state and micromachining technologies, significant advances in designing, fabricating and testing of microminiaturized devices have been achieved at laboratory level. However, the technical and economical realization of microelectromechanical systems is considerably impeded by the lack of satisfying device technology for their industrial production. A production concept for the industrial production of hybrid microelectromechanical systems was developed and investigated. The concept is based on the resources and requirements of medium-sized enterprises and is characterized by its flexibility. Microsystem fabrication is separated into microfabrication steps performed in-house and technological steps performed by external technology providers. The modularity of the concept allows for a gradual increase in the degree of automation and the in-house production depth, depending on market capacity and financial resources. To demonstrate the feasibility of this approach, the design and realization of a microfabrication process center, which includes tasks like transport and handling, processing, cleaning, testing and storing are discussed. Special attention is given to the supply and feeding of microparts, to the necessary magazines, trays and transport systems, to the implementation of homogeneous mechanical, environmental and information interfaces, to the employment of advanced control, scheduling, and lot tracking concepts, and to the application of highly modular and cost-efficient clean production concepts.

A knowledge-driven approach to biomedical document conceptualization.

PubMed

Zheng, Hai-Tao; Borchert, Charles; Jiang, Yong

2010-06-01

Biomedical document conceptualization is the process of clustering biomedical documents based on ontology-represented domain knowledge. The result of this process is the representation of the biomedical documents by a set of key concepts and their relationships. Most of clustering methods cluster documents based on invariant domain knowledge. The objective of this work is to develop an effective method to cluster biomedical documents based on various user-specified ontologies, so that users can exploit the concept structures of documents more effectively. We develop a flexible framework to allow users to specify the knowledge bases, in the form of ontologies. Based on the user-specified ontologies, we develop a key concept induction algorithm, which uses latent semantic analysis to identify key concepts and cluster documents. A corpus-related ontology generation algorithm is developed to generate the concept structures of documents. Based on two biomedical datasets, we evaluate the proposed method and five other clustering algorithms. The clustering results of the proposed method outperform the five other algorithms, in terms of key concept identification. With respect to the first biomedical dataset, our method has the F-measure values 0.7294 and 0.5294 based on the MeSH ontology and gene ontology (GO), respectively. With respect to the second biomedical dataset, our method has the F-measure values 0.6751 and 0.6746 based on the MeSH ontology and GO, respectively. Both results outperforms the five other algorithms in terms of F-measure. Based on the MeSH ontology and GO, the generated corpus-related ontologies show informative conceptual structures. The proposed method enables users to specify the domain knowledge to exploit the conceptual structures of biomedical document collections. In addition, the proposed method is able to extract the key concepts and cluster the documents with a relatively high precision. Copyright 2010 Elsevier B.V. All rights reserved.

Innovation through developing consumers communities. Part II: Digitalizing the innovation processes

NASA Astrophysics Data System (ADS)

Avasilcai, S.; Galateanu (Avram, E.

2015-11-01

The current research recognises the concept of innovation as the main driver for organisational growth and profitability. The companies seek to develop new ways to engage consumers and customers into co - creation value through the product design, development and distribution processes. However the main concern is manifested for new and creative ways of customization products based on consumers’ requirements and needs. Thus the need for innovative virtual instruments arose as the demand from social communities for personalised products or services increased. Basically companies should develop own innovative platforms, where consumers can participate, with ideas, concepts or other relevant contributions, and interact with designers or engineers for product development. This paper aims to present the most important features of platform development within BMW Group as a concept and as innovative instrument. From this point of view it is important to enhance past experiences of the company in the field of co - creation projects. There will be highlighted the dual consumers’ character as co - creator and co - evaluator based on their involvement in the proposed and developed projects and platform structure. The significant impact on platform functioning it has the diversity of company's concerns for Research & Development and innovation activities. From this point of view there will be assessed the platform structure, the main proposed themes and the evaluation process. The main outcome is to highlight the significance of platform development as innovative tool for consumers’ communities’ enhancement. Based on the analysis of “BMW Co-Creation Lab”, there will be revealed the main consumers concerns in terms of safety, comfort and appearance of the products. Thus it is important to understand the evaluation process of gathered ideas and intellectual property policy. The importance of platform development and implementation will be highlighted by company's results in terms of Research & Development investments and future projects which will be proposed, assessed and implemented by BMW Group in order to show the responsibility for their products and consumers.

Development Education and Disarmament Education.

ERIC Educational Resources Information Center

Burns, Robin

1981-01-01

Discusses development education as an educational process aimed at preparing people for participation in change and examines the implications for disarmament education. Development education is interpreted to include adult literacy education as well as a system of spreading basic concepts and encouraging and developing local initiatives. (DB)

Concept-Based Curricula: A National Study of Critical Concepts.

PubMed

Brussow, Jennifer A; Roberts, Karin; Scaruto, Matthew; Sommer, Sheryl; Mills, Christine

2018-02-22

As nursing education struggles to address a rapidly changing health care system, overcrowded curricula, and an increased focus on clinical reasoning skills, many programs have adopted or transitioned to concept-based curricula (CBCs), which are structured around key concepts and exemplars. Despite CBC's promised benefits, the process of developing a CBC framework may pose a challenge to programs. To address this barrier, a national study was conducted to develop a representative list of concepts and exemplars. This initiative expands on prior work by suggesting a leveled approach to positioning exemplars within a curricular sequence.This is an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited. The work cannot be changed in any way or used commercially without permission from the journal.

Advanced Spacesuit Portable Life Support System Packaging Concept Mock-Up Design & Development

NASA Technical Reports Server (NTRS)

O''Connell, Mary K.; Slade, Howard G.; Stinson, Richard G.

1998-01-01

A concentrated development effort was begun at NASA Johnson Space Center to create an advanced Portable Life Support System (PLSS) packaging concept. Ease of maintenance, technological flexibility, low weight, and minimal volume are targeted in the design of future micro-gravity and planetary PLSS configurations. Three main design concepts emerged from conceptual design techniques and were carried forth into detailed design, then full scale mock-up creation. "Foam", "Motherboard", and "LEGOtm" packaging design concepts are described in detail. Results of the evaluation process targeted maintenance, robustness, mass properties, and flexibility as key aspects to a new PLSS packaging configuration. The various design tools used to evolve concepts into high fidelity mock ups revealed that no single tool was all encompassing, several combinations were complimentary, the devil is in the details, and, despite efforts, many lessons were learned only after working with hardware.

MFPG. The Role of Coatings in the Prevention of Mechanical Failures. Proceedings of the 23rd Meeting of the Mechanical Failures Prevention Group, Held at the National Bureau of Standards, Gaithersburg, Maryland on October 29-31, 1975

DTIC Science & Technology

1976-09-01

testing evaluation and production process development . This coated microspherical fuel particle has been successfully developed over a period of...this reliable concept began with attempts to blend ceramic (oxide or carbide) fuel powders into a graphite matrix in the early concepts of ROVER, HTGR ...lubricants. An ongoing program at the Naval Air Development Center is investigating how some parameters affect corro- sion between solid film

The use of concept mapping for scale development and validation in evaluation.

PubMed

Rosas, Scott R; Camphausen, Lauren C

2007-05-01

Evaluators often make key decisions about what content to include when designing new scales. However, without clear conceptual grounding, there is a risk these decisions may compromise the scale's validity. Techniques such as concept mapping are available to evaluators for the specification of conceptual frameworks, but have not been used as a fully integrated part of scale development. As part of a multi-site evaluation of family support programs, we integrated concept mapping with traditional scale-development processes to strengthen the creation of a scale for inclusion in an evaluation instrument. Using concept mapping, we engaged staff and managers in the development of a framework of intended benefits of program participation and used the information to systematically select the scale's content. The psychometric characteristics of the scale were then formally assessed using a sample of program participants. The implications of the approach for supporting construct validity, inclusion of staff and managers, and theory-driven evaluation are discussed.

Bockron as a Medium of Learning in The Process of Inquiry based Learning to Improve Science Process Skills of Junior High School Students in Growth and Development Concept

NASA Astrophysics Data System (ADS)

Mayasari, D.

2017-02-01

Investigative research on Influence of bockron as a medium of learning in process of inquiry-based learning to the development of science process skills on the concept of growth and development. This research was done in an effort to follow up underdeveloped skills of observing, communicating andconclude on students. This research was conducted using classroom action research (PTK), which consisted of 3 cycles. Cycle 1 students observe differences in growth and development, cycle 2 students measure the growth rate, cycle 3 students observe factors that influence growth and development, In these three cycles is used as a planting medium bocron (bottles and dacron). It involves 8th grade junior high-school students of 14-15 years old as research subjects in six meetings. Indicators of process skill include observation, communication, interpretation and inference. Data is collected through students’ work sheets, written tests and observation. Processing of the data to see N-Gain used Microsoft Excel 2007, and the results showed that an increase in science process skills with a value of medium N-Gain (0,63). Bokron learning medium easily and cheaply obtainable around the students, particularly those in urban areas is quite difficult to get land to be used as aplanting medium. In addition to observation of growth and development, bokron media can also be used to observe the motion in plants. The use bokron as a learning medium can train and develop science process skills, attitude and scientific method also gives students concrete experience of the process of growth and development in plants.

Coupled Multi-physical Simulations for the Assessment of Nuclear Waste Repository Concepts: Modeling, Software Development and Simulation

NASA Astrophysics Data System (ADS)

Massmann, J.; Nagel, T.; Bilke, L.; Böttcher, N.; Heusermann, S.; Fischer, T.; Kumar, V.; Schäfers, A.; Shao, H.; Vogel, P.; Wang, W.; Watanabe, N.; Ziefle, G.; Kolditz, O.

2016-12-01

As part of the German site selection process for a high-level nuclear waste repository, different repository concepts in the geological candidate formations rock salt, clay stone and crystalline rock are being discussed. An open assessment of these concepts using numerical simulations requires physical models capturing the individual particularities of each rock type and associated geotechnical barrier concept to a comparable level of sophistication. In a joint work group of the Helmholtz Centre for Environmental Research (UFZ) and the German Federal Institute for Geosciences and Natural Resources (BGR), scientists of the UFZ are developing and implementing multiphysical process models while BGR scientists apply them to large scale analyses. The advances in simulation methods for waste repositories are incorporated into the open-source code OpenGeoSys. Here, recent application-driven progress in this context is highlighted. A robust implementation of visco-plasticity with temperature-dependent properties into a framework for the thermo-mechanical analysis of rock salt will be shown. The model enables the simulation of heat transport along with its consequences on the elastic response as well as on primary and secondary creep or the occurrence of dilatancy in the repository near field. Transverse isotropy, non-isothermal hydraulic processes and their coupling to mechanical stresses are taken into account for the analysis of repositories in clay stone. These processes are also considered in the near field analyses of engineered barrier systems, including the swelling/shrinkage of the bentonite material. The temperature-dependent saturation evolution around the heat-emitting waste container is described by different multiphase flow formulations. For all mentioned applications, we illustrate the workflow from model development and implementation, over verification and validation, to repository-scale application simulations using methods of high performance computing.

Baseband-processed SS-TDMA communication system architecture and design concepts

NASA Technical Reports Server (NTRS)

Attwood, S.; Sabourin, D.

1982-01-01

The architecture and system design for a commercial satellite communications system planned for the 1990's was developed by Motorola for NASA's Lewis Research Center. The system provides data communications between individual users via trunking and customer premises service terminals utilizing a central switching satellite operating in a time-division multiple-access (TDMA) mode. The major elements of the design incorporating baseband processing include: demand-assigned multiple access reservation protocol, spectral utilization, system synchronization, modulation technique and forward error control implementation. Motorola's baseband processor design, which is being proven in a proof-of-concept advanced technology development, will perform data regeneration and message routing for individual users on-board the spacecraft.

Process development and tooling design for intrinsic hybrid composites

NASA Astrophysics Data System (ADS)

Riemer, M.; Müller, R.; Drossel, W. G.; Landgrebe, D.

2017-09-01

Hybrid parts, which combine the advantages of different material classes, are moving into the focus of lightweight applications. This development is amplified by their high potential for usage in the field of crash relevant structures. By the current state of the art, hybrid parts are mainly made in separate, subsequent forming and joining processes. By using the concept of an intrinsic hybrid, the shaping of the part and the joining of the different materials are performed in a single process step for shortening the overall processing time and thereby the manufacturing costs. The investigated hybrid part is made from continuous fibre reinforced plastic (FRP), in which a metallic reinforcement structure is integrated. The connection between these layered components is realized by a combination of adhesive bonding and a geometrical form fit. The form fit elements are intrinsically generated during the forming process. This contribution regards the development of the forming process and the design of the forming tool for the single step production of a hybrid part. To this end a forming tool, which combines the thermo-forming and the metal forming process, is developed. The main challenge by designing the tool is the temperature management of the tool elements for the variothermal forming process. The process parameters are determined in basic tests and finite element (FE) simulation studies. On the basis of these investigations a control concept for the steering of the motion axes and the tool temperature is developed. Forming tests are carried out with the developed tool and the manufactured parts are analysed by computer assisted tomography (CT) scans.

Automated assembly of VECSEL components

NASA Astrophysics Data System (ADS)

Brecher, C.; Pyschny, N.; Haag, S.; Mueller, T.

2013-02-01

Due to the architectural advantage of an external cavity architecture that enables the integration of additional elements into the cavity (e.g. for mode control, frequency conversion, wavelength tuning or passive mode-locking) VECSELs are a rapidly developing laser technology. Nevertheless they often have to compete with direct (edge) emitting laser diodes which can have significant cost advantages thanks to their rather simple structure and production processes. One way to compensate the economical disadvantages of VECSELs is to optimize each component in terms of quality and costs and to apply more efficient (batch) production processes. In this context, the paper presents recent process developments for the automated assembly of VECSELs using a new type of desktop assembly station with an ultra-precise micromanipulator. The core concept is to create a dedicated process development environment from which implemented processes can be transferred fluently to production equipment. By now two types of processes have been put into operation on the desktop assembly station: 1.) passive alignment of the pump optics implementing a camera-based alignment process, where the pump spot geometry and position on the semiconductor chip is analyzed and evaluated; 2.) active alignment of the end mirror based on output power measurements and optimization algorithms. In addition to the core concept and corresponding hardware and software developments, detailed results of both processes are presented explaining measurement setups as well as alignment strategies and results.

40 CFR 93.107 - Relationship of transportation plan and TIP conformity with the NEPA process.

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of specificity required in the transportation plan and the specific travel network assumed for air... development studies. Should the NEPA process result in a project with design concept and scope significantly...

Solar Highway Program : from concept to reality : a guidebook for Departments of Transportation to develop solar photovoltaic systems in the highway right-of-way.

DOT National Transportation Integrated Search

2016-11-01

This guidebook is intended to provide an overview for state Departments of Transportation (DOTs) of the process for developing solar photovoltaic (PV) projects in the highway right-of-way. The goal is to help others navigate the process towards a suc...

Life and Self Meaning: The Process of Their Creation.

ERIC Educational Resources Information Center

Weenolsen, Patricia

Research has not addressed issues of life meaning in a life-span developmental framework. The Loss and Transcendence paradigm was developed as a humanistic-existential approach to life-span development which has as its central theme the concept that individuals are in a continuous process of creating their lives and their selves. To explore loss…

Globalisation and Education for Sustainable Development: Exploring the Global in Motion

ERIC Educational Resources Information Center

Bengtsson, Stefan L.; Östman, Leif O.

2016-01-01

The article explores education for sustainable development (ESD) as a policy concept in different spaces and how it is re-articulated as part of a process of globalisation. The objective is to explore empirically an alternative set of logics in order to conceive of this process of globalisation. With this objective in mind, the article…

Eliciting and Developing Teachers' Conceptions of Random Processes in a Probability and Statistics Course

ERIC Educational Resources Information Center

Smith, Toni M.; Hjalmarson, Margret A.

2013-01-01

The purpose of this study is to examine prospective mathematics specialists' engagement in an instructional sequence designed to elicit and develop their understandings of random processes. The study was conducted with two different sections of a probability and statistics course for K-8 teachers. Thirty-two teachers participated. Video analyses…

The "National Medium- and Long-Term Educational Reform and Development Guideline (2010-20)": Expectations, Strategies, and Significance

ERIC Educational Resources Information Center

Xiaobing, Sun

2012-01-01

This paper starts out by describing the research and drafting processes of the "National Medium- and Long-Term Educational Reform and Development Guideline" (2010-20) (hereafter abbreviated as the "Guideline") and analyzes a series of core concepts that ran through the entire process of researching and drafting the…

Public Marketing: An Alternative Policy Decision-Making Idea for Small Cities. Community Development Research Series.

ERIC Educational Resources Information Center

Meyers, James; And Others

The concept of public marketing presents a strategy for the systems approach to community development that would facilitate the community decision making process via improved communication. Basic aspects of the social marketing process include: (1) product policy; (2) channels of distribution; (3) pricing (perceived price vs quality and quantity…

The Development of Word Processing and Its Implications for the Business Education Profession.

ERIC Educational Resources Information Center

Ober, B. Scot

In an attempt to deal with the paperwork explosion occurring in business offices, administrative management has developed the concept of word processing as a means of increasing office efficiency. Thus, the purpose of this study was to provide business educators with information on this new management tool and to identify those skills needed by…

Conceptual information processing: A robust approach to KBS-DBMS integration

NASA Technical Reports Server (NTRS)

Lazzara, Allen V.; Tepfenhart, William; White, Richard C.; Liuzzi, Raymond

1987-01-01

Integrating the respective functionality and architectural features of knowledge base and data base management systems is a topic of considerable interest. Several aspects of this topic and associated issues are addressed. The significance of integration and the problems associated with accomplishing that integration are discussed. The shortcomings of current approaches to integration and the need to fuse the capabilities of both knowledge base and data base management systems motivates the investigation of information processing paradigms. One such paradigm is concept based processing, i.e., processing based on concepts and conceptual relations. An approach to robust knowledge and data base system integration is discussed by addressing progress made in the development of an experimental model for conceptual information processing.

Significant and Basic Innovations in Urban Planning

NASA Astrophysics Data System (ADS)

Kolyasnikov, V. A.

2017-11-01

The article considers the development features of the innovative urban planning in the USSR and Russia in XVIII - XX centuries. Innovative urban planning is defined as an activity on innovations creation and their implementation to obtain a socio-economic, political, environmental or other effect. In the course of urban development history this activity represents a cyclic wave process in which there are phases of rise and fall. The study of cyclic waves in the development of innovative urban planning uses the concept of basic and epochal innovations selection. This concept was developed by scientists for the study of cyclic wave processes in economics. Its adaptation to the conditions of innovative urban planning development allows one to introduce the concept of “basic innovation” and “significant innovation” in the theory and practice of settlement formation and their systems as well as to identify opportunities to highlight these innovations in the history of Russian urban planning. From these positions, six innovation waves committed to the urban development over the past 300 years are being investigated. The observed basic innovations in the domestic urban area show that urban development is a vital area for ensuring the country’s geopolitical security. Basic innovations are translated in time and modernized under new conditions of urban planning development. In this regard, we can predict the development of four basic innovations in post-Soviet Russia.

Design concepts for an on-board coherent optical image processor

NASA Technical Reports Server (NTRS)

Husain-Abidi, A. S.

1972-01-01

On-board spacecraft image data processing systems for transmitting processed data rather than raw data are discussed. A brief history of the development of the optical data processing techniques is presented along with the conceptual design of a coherent optical system with a noncoherent image input.

Children as scientists: Adding, connecting and elaborating ideas on the way to conceptual development

NASA Astrophysics Data System (ADS)

Osmundson, Ellen

In this study, I explored how children develop and construct their ideas and alternative frameworks in science. Prior work in this area suggested that changes from alternative conceptions to understandings that more closely resemble scientists' models do not occur in a sequential, linear fashion, nor are they easily accomplished. By employing a constructivist framework grounded in dynamic systems to look at learning, alternative conceptions were viewed not as ideas that need to be "confronted and replaced" but rather as pieces of an intricate puzzle of understanding that when combined create a more complete, functional, continuous understanding of science. Specifically, the study examined students' understandings and conceptualizations of light as they studied it formally for eight weeks. Understandings were measured through interviews, student-generated concept maps, classroom interactions and by examining student work samples. The central questions guiding the investigation were: What were children's (ages 9 and 10) conceptions of light? Did children's ideas about light develop during their eight week study of it? If so, what was the nature of these changes? Results from the study indicated that children had numerous ideas about light before their formal study of it based on their experiences with the world. As children studied light, they learned about it in the dynamic, synergistic and interactive processes of adding new ideas, connecting ideas to one another and elaborating understandings to arrive at progressively more complex and scientific understandings of light. Alternative conceptions, served as both productive and non-productive resources for learning. Further, alternative conceptions and prior understandings did not disappear as children developed their ideas about light. Rather "old" ideas were used and reused to provide support the gradual process of cognitive development of children's ideas about light. Findings from this study can be used to provide science instruction that is both rich in content and rich in opportunities to experience the recursive and dynamic nature of science learning.

Influence of Microstructure Representation on Flow Stress and Grain Size Prediction in Through-Process Modeling of AA5182 Sheet Production

NASA Astrophysics Data System (ADS)

Lohmar, Johannes; Bambach, Markus; Karhausen, Kai F.

2013-01-01

Integrated computational materials engineering is an up to date method for developing new materials and optimizing complete process chains. In the simulation of a process chain, material models play a central role as they capture the response of the material to external process conditions. While much effort is put into their development and improvement, less attention is paid to their implementation, which is problematic because the representation of microstructure in the model has a decisive influence on modeling accuracy and calculation speed. The aim of this article is to analyze the influence of different microstructure representation concepts on the prediction of flow stress and microstructure evolution when using the same set of material equations. Scalar, tree-based and cluster-based concepts are compared for a multi-stage rolling process of an AA5182 alloy. It was found that implementation influences the predicted flow stress and grain size, in particular in the regime of coupled hardening and softening.

Developmental engineering: a new paradigm for the design and manufacturing of cell-based products. Part II: from genes to networks: tissue engineering from the viewpoint of systems biology and network science.

PubMed

Lenas, Petros; Moos, Malcolm; Luyten, Frank P

2009-12-01

The field of tissue engineering is moving toward a new concept of "in vitro biomimetics of in vivo tissue development." In Part I of this series, we proposed a theoretical framework integrating the concepts of developmental biology with those of process design to provide the rules for the design of biomimetic processes. We named this methodology "developmental engineering" to emphasize that it is not the tissue but the process of in vitro tissue development that has to be engineered. To formulate the process design rules in a rigorous way that will allow a computational design, we should refer to mathematical methods to model the biological process taking place in vitro. Tissue functions cannot be attributed to individual molecules but rather to complex interactions between the numerous components of a cell and interactions between cells in a tissue that form a network. For tissue engineering to advance to the level of a technologically driven discipline amenable to well-established principles of process engineering, a scientifically rigorous formulation is needed of the general design rules so that the behavior of networks of genes, proteins, or cells that govern the unfolding of developmental processes could be related to the design parameters. Now that sufficient experimental data exist to construct plausible mathematical models of many biological control circuits, explicit hypotheses can be evaluated using computational approaches to facilitate process design. Recent progress in systems biology has shown that the empirical concepts of developmental biology that we used in Part I to extract the rules of biomimetic process design can be expressed in rigorous mathematical terms. This allows the accurate characterization of manufacturing processes in tissue engineering as well as the properties of the artificial tissues themselves. In addition, network science has recently shown that the behavior of biological networks strongly depends on their topology and has developed the necessary concepts and methods to describe it, allowing therefore a deeper understanding of the behavior of networks during biomimetic processes. These advances thus open the door to a transition for tissue engineering from a substantially empirical endeavor to a technology-based discipline comparable to other branches of engineering.

SOIL AND WATER CONSERVATION PROJECTS AND ACTIVITIES, A GUIDE FOR 4-H CLUB LEADERS.

ERIC Educational Resources Information Center

FOSTER, ALBERT B.; FOX, ADRIAN C.

THIS PUBLICATION WAS PREPARED BY THE SOIL CONSERVATION SERVICE FOR USE WITH YOUTH GROUPS. VARIOUS ACTIVITIES AND PROJECTS ARE PRESENTED WHICH CAN BE USED TO DEVELOP CONCEPTS ABOUT SOIL AND WATER CONSERVATION. IN ORDER TO SIMPLIFY THE PROCESS OF DEMONSTRATING THESE ACTIVITIES, MANY OF THE CONCEPTS ARE PICTORIALLY ILLUSTRATED. THE ACTIVITIES…

Core Information Processing Deficits in Developmental Dyscalculia and Low Numeracy

ERIC Educational Resources Information Center

Iuculano, Teresa; Tang, Joey; Hall, Charles W. B.; Butterworth, Brian

2008-01-01

There are two different conceptions of the innate basis for numerical abilities. On the one hand, it is claimed that infants possess a "number module" that enables them to construct concepts of the exact numerosities of sets upon which arithmetic develops (e.g. Butterworth, 1999 ; Gelman & Gallistel, 1978). On the other hand, it has been proposed…

The Role of Gender in the Socialization of Emotion: Key Concepts and Critical Issues

ERIC Educational Resources Information Center

Root, Amy Kennedy; Denham, Susanne A.

2010-01-01

Given the omnipresent role of gender in children's and adolescents' development, it seems necessary to better understand how gender affects the process of emotion socialization. In this introductory chapter, the authors discuss the overarching themes and key concepts discussed in this volume, as well as outline the distinct contribution of each…

User-Centered Innovation: A Model for "Early Usability Testing."

ERIC Educational Resources Information Center

Sugar, William A.; Boling, Elizabeth

The goal of this study is to show how some concepts and techniques from disciplines outside Instructional Systems Development (ISD) have the potential to extend and enhance the traditional view of ISD practice when they are employed very early in the ISD process. The concepts and techniques employed were user-centered in design and usability, and…

Developing Physics Concepts through Hands-On Problem Solving: A Perspective on a Technological Project Design

ERIC Educational Resources Information Center

Hong, Jon-Chao; Chen, Mei-Yung; Wong, Ashley; Hsu, Tsui-Fang; Peng, Chih-Chi

2012-01-01

In a contest featuring hands-on projects, college students were required to design a simple crawling worm using planning, self-monitoring and self-evaluation processes to solve contradictive problems. To enhance the efficiency of problem solving, one needs to practice meta-cognition based on an application of related scientific concepts. The…

Building an ontology of pulmonary diseases with natural language processing tools using textual corpora.

PubMed

Baneyx, Audrey; Charlet, Jean; Jaulent, Marie-Christine

2007-01-01

Pathologies and acts are classified in thesauri to help physicians to code their activity. In practice, the use of thesauri is not sufficient to reduce variability in coding and thesauri are not suitable for computer processing. We think the automation of the coding task requires a conceptual modeling of medical items: an ontology. Our task is to help lung specialists code acts and diagnoses with software that represents medical knowledge of this concerned specialty by an ontology. The objective of the reported work was to build an ontology of pulmonary diseases dedicated to the coding process. To carry out this objective, we develop a precise methodological process for the knowledge engineer in order to build various types of medical ontologies. This process is based on the need to express precisely in natural language the meaning of each concept using differential semantics principles. A differential ontology is a hierarchy of concepts and relationships organized according to their similarities and differences. Our main research hypothesis is to apply natural language processing tools to corpora to develop the resources needed to build the ontology. We consider two corpora, one composed of patient discharge summaries and the other being a teaching book. We propose to combine two approaches to enrich the ontology building: (i) a method which consists of building terminological resources through distributional analysis and (ii) a method based on the observation of corpus sequences in order to reveal semantic relationships. Our ontology currently includes 1550 concepts and the software implementing the coding process is still under development. Results show that the proposed approach is operational and indicates that the combination of these methods and the comparison of the resulting terminological structures give interesting clues to a knowledge engineer for the building of an ontology.

The Sustainable Expression of Ecological Concept in the Urban Landscape Environment Design

NASA Astrophysics Data System (ADS)

Dong, Junyan; Zhou, Tiejun; Xin, Lisen; Tan, Yuetong; Wang, Zhigang

2018-02-01

Urbanization is an inevitable trend of development of human society, also the inevitable outcome of economic development and scientific and technological progress, while urbanization process in promoting the development of human civilization, also no doubt, urban landscape has been a corresponding impact. Urban environment has suffered unprecedented damage, the urban population density, traffic congestion, shortage of resources, environmental pollution, ecological degradation, has become the focus of human society. In order to create an environment of ecological and harmonious, beautiful, sustainable development in the urban landscape, This paper discusses the concept of ecological design combined with the urban landscape design and sustainable development of urban landscape design.

Principles Supporting the Perceptional Teaching of Physics: A ``Practical Teaching Philosophy''

NASA Astrophysics Data System (ADS)

Kurki-Suonio, Kaarle

2011-03-01

This article sketches a framework of ideas developed in the context of decades of physics teacher-education that was entitled the "perceptional approach". Individual learning and the scientific enterprise are interpreted as different manifestations of the same process aimed at understanding the natural and social worlds. The process is understood to possess the basic nature of perception, where empirical meanings are first born and then conceptualised. The accumulation of perceived gestalts in the "structure of the mind" leads to structural perception and the generation of conceptual hierarchies, which form a general principle for the expansion of our understanding. The process undergoes hierarchical development from early sensory perception to individual learning and finally to science. The process is discussed in terms of a three-process dynamic. Scientific and technological processes are driven by the interaction of the mind and nature. They are embedded in the social process due to the interaction of individual minds. These sub-processes are defined by their aims: The scientific process affects the mind and aims at understanding; the technological process affects nature and aims at human well-being; and the social process aims at mutual agreement and cooperation. In hierarchical development the interaction of nature and the mind gets structured into a "methodical cycle" by procedures involving conscious activities. Its intuitive nature is preserved due to subordination of the procedures to empirical meanings. In physics, two dimensions of hierarchical development are distinguished: Unification development gives rise to a generalisation hierarchy of concepts; Quantification development transfers the empirical meanings to quantities, laws and theories representing successive hierarchical levels of quantitative concepts. Consequences for physics teaching are discussed in principle, and in the light of examples and experiences from physics teacher education.

Integrated residential photovoltaic array development

NASA Astrophysics Data System (ADS)

Shepard, N. F., Jr.

1981-12-01

An advanced, universally-mountable, integrated residential photovoltaic array concept was defined based upon an in-depth formulation and evaluation of three candidate approaches which were synthesized from existing or proposed residential array concepts. The impact of module circuitry and process sequence is considered and technology gaps and performance drivers associated with residential photovoltaic array concepts are identified. The actual learning experience gained from the comparison of the problem areas of the hexagonal shingle design with the rectangular module design led to what is considered an advanced array concept. Building the laboratory mockup provided actual experience and the opportunity to uncover additional technology gaps.

Integrated residential photovoltaic array development

NASA Technical Reports Server (NTRS)

Shepard, N. F., Jr.

1981-01-01

An advanced, universally-mountable, integrated residential photovoltaic array concept was defined based upon an in-depth formulation and evaluation of three candidate approaches which were synthesized from existing or proposed residential array concepts. The impact of module circuitry and process sequence is considered and technology gaps and performance drivers associated with residential photovoltaic array concepts are identified. The actual learning experience gained from the comparison of the problem areas of the hexagonal shingle design with the rectangular module design led to what is considered an advanced array concept. Building the laboratory mockup provided actual experience and the opportunity to uncover additional technology gaps.

Concept identification for a power take-off shielding campaign.

PubMed

Tinc, P J; Madden, E; Park, S; Weil, R; Sorensen, J A

2015-01-01

ABSTRACT Machinery entanglements, specifically power take-off (PTO) entanglements, are a leading cause of injuries and fatalities on farms. In order to address this life-threatening issue, a social marketing campaign is being developed to reduce barriers and emphasize motivators to shielding. This article discusses the process of designing, testing, and selecting concepts to be used in the campaign. Small-group discussions (triads) were held to test 13 message concepts. Participants were asked to provide feedback and select the two messages that they believed to be most powerful. Upon completion, three message concepts were selected to be finalized.

The Development of Stacked Core for the Fabrication of Deep Lightweight UV-Quality Space Mirrors

NASA Technical Reports Server (NTRS)

Matthews, Gary W.; Egerman, Robert; Maffett, Steven P.; Stahl, H. Philip; Eng, Ron; Effinger, Michael R.

2014-01-01

The 2010 Decadal Survey stated that an advanced large-aperture ultraviolet, optical, near-infrared (UVOIR) telescope is required to enable the next generation of compelling astrophysics and exoplanet science; and, that present technology is not mature enough to affordably build and launch any potential UVOIR mission concept. Under Science and Technology funding, NASA's Marshall Space Flight Center (MSFC) and Exelis have developed a more cost effective process to make 4m class or larger monolithic spaceflight UV quality, low areal density, thermally and dynamically stable primary mirrors. A proof of concept 0.43m mirror was completed at Exelis optically tested at 250K at MSFC which demonstrated the ability for imaging out to 2.5 microns. The parameters and test results of this concept mirror are shown. The next phase of the program includes a 1.5m subscale mirror that will be optically and dynamically tested. The scale-up process will be discussed and the technology development path to a 4m mirror system by 2018 will be outlined.

Nurses amidst change: the concept of change fatigue offers an alternative perspective on organizational change.

PubMed

McMillan, Kim; Perron, Amélie

2013-02-01

This article aims to clarify the concept of change fatigue and deems further exploration of the concept within the discipline of nursing is relevant and necessary. The concept of change fatigue has evolved from the discipline of management as a means to explore organization change and its associated triumphs and failures. Change fatigue has typically been described as one and the same as change resistance, with very little literature acknowledging that they are in fact distinct concepts. Concept clarification has highlighted the striking differences and few similarities that exist between the concepts of change fatigue and change resistance. Further exploration and subsequent research on the concept of change fatigue is needed within the discipline of nursing. The concept not only presents new and alternative perspectives on the processes of organization change, but provides opportunity for theory development that recognizes the impact organizational change has on nurses' work lives.

MODIS information, data and control system (MIDACS) operations concepts

NASA Technical Reports Server (NTRS)

Han, D.; Salomonson, V.; Ormsby, J.; Ardanuy, P.; Mckay, A.; Hoyt, D.; Jaffin, S.; Vallette, B.; Sharts, B.; Folta, D.

1988-01-01

The MODIS Information, Data, and Control System (MIDACS) Operations Concepts Document provides a basis for the mutual understanding between the users and the designers of the MIDACS, including the requirements, operating environment, external interfaces, and development plan. In defining the concepts and scope of the system, how the MIDACS will operate as an element of the Earth Observing System (EOS) within the EosDIS environment is described. This version follows an earlier release of a preliminary draft version. The individual operations concepts for planning and scheduling, control and monitoring, data acquisition and processing, calibration and validation, data archive and distribution, and user access do not yet fully represent the requirements of the data system needed to achieve the scientific objectives of the MODIS instruments and science teams. The teams are not yet formed; however, it is possible to develop the operations concepts based on the present concept of EosDIS, the level 1 and level 2 Functional Requirements Documents, and through interviews and meetings with key members of the scientific community. The operations concepts were exercised through the application of representative scenarios.

A Concept for Run-Time Support of the Chapel Language

NASA Technical Reports Server (NTRS)

James, Mark

2006-01-01

A document presents a concept for run-time implementation of other concepts embodied in the Chapel programming language. (Now undergoing development, Chapel is intended to become a standard language for parallel computing that would surpass older such languages in both computational performance in the efficiency with which pre-existing code can be reused and new code written.) The aforementioned other concepts are those of distributions, domains, allocations, and access, as defined in a separate document called "A Semantic Framework for Domains and Distributions in Chapel" and linked to a language specification defined in another separate document called "Chapel Specification 0.3." The concept presented in the instant report is recognition that a data domain that was invented for Chapel offers a novel approach to distributing and processing data in a massively parallel environment. The concept is offered as a starting point for development of working descriptions of functions and data structures that would be necessary to implement interfaces to a compiler for transforming the aforementioned other concepts from their representations in Chapel source code to their run-time implementations.

Robust flight design for an advanced launch system vehicle

NASA Astrophysics Data System (ADS)

Dhand, Sanjeev K.; Wong, Kelvin K.

Current launch vehicle trajectory design philosophies are generally based on maximizing payload capability. This approach results in an expensive trajectory design process for each mission. Two concepts of robust flight design have been developed to significantly reduce this cost: Standardized Trajectories and Command Multiplier Steering (CMS). These concepts were analyzed for an Advanced Launch System (ALS) vehicle, although their applicability is not restricted to any particular vehicle. Preliminary analysis has demonstrated the feasibility of these concepts at minimal loss in payload capability.

Space station automation study. Automation requirements derived from space manufacturing concepts. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1984-01-01

The two manufacturing concepts developed represent innovative, technologically advanced manufacturing schemes. The concepts were selected to facilitate an in depth analysis of manufacturing automation requirements in the form of process mechanization, teleoperation and robotics, and artificial intelligence. While the cost effectiveness of these facilities has not been analyzed as part of this study, both appear entirely feasible for the year 2000 timeframe. The growing demand for high quality gallium arsenide microelectronics may warrant the ventures.

Developing an instrument for assessing students' concepts of the nature of technology

NASA Astrophysics Data System (ADS)

Liou, Pey-Yan

2015-05-01

Background:The nature of technology has been rarely discussed despite the fact that technology plays an essential role in modern society. It is important to discuss students' concepts of the nature of technology, and further to advance their technological literacy and adaptation to modern society. There is a need to assess high school students' concepts of the nature of technology. Purpose:This study aims to engage in discourse on students' concepts of the nature of technology based on a proposed theoretical framework. Moreover, another goal is to develop an instrument for measuring students' concepts of the nature of technology. Sample:Four hundred and fifty-five high school students' perceptions of technology were qualitatively analyzed. Furthermore, 530 students' responses to a newly developed questionnaire were quantitatively analyzed in the final test. Design and method:First, content analysis was utilized to discuss and categorize students' statements regarding technology and its related issues. The Student Concepts of the Nature of Technology Questionnaire was developed based on the proposed theoretical framework and was supported by the students' qualitative data. Finally, exploratory factor analysis and reliability analysis were applied to determine the structure of the items and the internal consistency of each scale. Results:Through a process of instrument development, the Student Concepts of the Nature of Technology Questionnaire was shown to be a valid and reliable tool for measuring students' concepts of the nature of technology. This newly developed questionnaire is composed of 29 items in six scales, namely 'technology as artifacts,' 'technology as an innovation change,' 'the current role of technology in society,' 'technology as a double-edged sword,' 'technology as a science-based form,' and 'history of technology.' Conclusions:The Student Concepts of the Nature of Technology Questionnaire has been confirmed as a reasonably valid and reliable instrument. This study provides a useful questionnaire for educational researchers and practitioners for measuring students' concepts of the nature of technology.

Advances in biologically inspired on/near sensor processing

NASA Astrophysics Data System (ADS)

McCarley, Paul L.

1999-07-01

As electro-optic sensors increase in size and frame rate, the data transfer and digital processing resource requirements also increase. In many missions, the spatial area of interest is but a small fraction of the available field of view. Choosing the right region of interest, however, is a challenge and still requires an enormous amount of downstream digital processing resources. In order to filter this ever-increasing amount of data, we look at how nature solves the problem. The Advanced Guidance Division of the Munitions Directorate, Air Force Research Laboratory at Elgin AFB, Florida, has been pursuing research in the are of advanced sensor and image processing concepts based on biologically inspired sensory information processing. A summary of two 'neuromorphic' processing efforts will be presented along with a seeker system concept utilizing this innovative technology. The Neuroseek program is developing a 256 X 256 2-color dual band IRFPA coupled to an optimized silicon CMOS read-out and processing integrated circuit that provides simultaneous full-frame imaging in MWIR/LWIR wavebands along with built-in biologically inspired sensor image processing functions. Concepts and requirements for future such efforts will also be discussed.

Korean immigrant women's physical activity experience: a situation-specific theory.

PubMed

Im, Eun-Ok; Chang, Sun Ju; Nguyen, Giang; Stringer, Lynn; Chee, Wonshik; Chee, Eunice

2015-01-01

To develop successful physical activity promotion programs for midlife immigrant women, especially for Korean immigrant midlife women, concrete theoretical bases are needed. However, virtually no theoretical frameworks and/or theories exist that can explain the influences of immigration transition on the physical activity experience of midlife immigrant women in general or Korean immigrant midlife women in specific. The purpose of this article is to present a situation-specific theory on physical activity experience of Korean immigrant midlife women (SPAKIM) with its development process. An integrative approach was used to develop the theory based on the midlife women's attitudes toward physical activity (MAPA) theory, the transitions theory, a review of the relevant literature, and two studies on midlife women's attitudes toward physical activity. The proposed theory includes nature of transitions, nonmodifiable and modifiable transition conditions, contexts of daily life, patterns of response, and nursing therapeutics as major concepts, and each major concept includes several related subconcepts. Because several concepts of the theory were developed mainly based on the literature review, the major concepts and related subconcepts need to be further developed and evaluated in future studies.

Computational Features of Flow Modeling in Nanostructured Sensors

NASA Astrophysics Data System (ADS)

Ionescu, Adela; Savu, Dan; Savu, Sorin; Coman, Daniela

2009-04-01

Nowadays the productivity of the welding processes represents an important factor in economy concepts. The technologies which are developed by the researchers are oriented to the increasing of the welding processes' productivity and to the improvement of the products' quality.

14 CFR § 1240.102 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... experimental or beta phase of development, that performs in accordance with its specifications, and includes... mathematical, engineering or scientific concept, idea, design, process, or product. (h) Innovator means any..., method, process, machine, manufacture, design, or composition of matter, or any new and useful...

Editors' Introduction: Abstract Concepts: Structure, Processing, and Modeling.

PubMed

Bolognesi, Marianna; Steen, Gerard

2018-06-22

Our ability to deal with abstract concepts is one of the most intriguing faculties of human cognition. Still, we know little about how such concepts are formed, processed, and represented in mind. For example, because abstract concepts do not designate referents that can be experienced through our body, the role of perceptual experiences in shaping their content remains controversial. Current theories suggest a variety of alternative explanations to the question of "how abstract concepts are represented in the human mind." These views pinpoint specific streams of semantic information that would play a prominent role in shaping the content of abstract concepts, such as situation-based information (e.g., Barsalou & Wiemer-Hastings, ), affective information (Kousta, Vigliocco, Vinson, Andrews, & Del Campo, ), and linguistic information (Louwerse, ). Rarely, these theoretical views are directly compared. In this special issue, current views are presented in their most recent and advanced form, and directly compared and discussed in a debate, which is reported at the end of each article. As a result, new exciting questions and challenges arise. These questions and challenges, reported in this introductory article, can arguably pave the way to new empirical studies and theoretical developments on the nature of abstract concepts. © 2018 Cognitive Science Society, Inc.

Data-intensive drug development in the information age: applications of Systems Biology/Pharmacology/Toxicology.

PubMed

Kiyosawa, Naoki; Manabe, Sunao

2016-01-01

Pharmaceutical companies continuously face challenges to deliver new drugs with true medical value. R&D productivity of drug development projects depends on 1) the value of the drug concept and 2) data and in-depth knowledge that are used rationally to evaluate the drug concept's validity. A model-based data-intensive drug development approach is a key competitive factor used by innovative pharmaceutical companies to reduce information bias and rationally demonstrate the value of drug concepts. Owing to the accumulation of publicly available biomedical information, our understanding of the pathophysiological mechanisms of diseases has developed considerably; it is the basis for identifying the right drug target and creating a drug concept with true medical value. Our understanding of the pathophysiological mechanisms of disease animal models can also be improved; it can thus support rational extrapolation of animal experiment results to clinical settings. The Systems Biology approach, which leverages publicly available transcriptome data, is useful for these purposes. Furthermore, applying Systems Pharmacology enables dynamic simulation of drug responses, from which key research questions to be addressed in the subsequent studies can be adequately informed. Application of Systems Biology/Pharmacology to toxicology research, namely Systems Toxicology, should considerably improve the predictability of drug-induced toxicities in clinical situations that are difficult to predict from conventional preclinical toxicology studies. Systems Biology/Pharmacology/Toxicology models can be continuously improved using iterative learn-confirm processes throughout preclinical and clinical drug discovery and development processes. Successful implementation of data-intensive drug development approaches requires cultivation of an adequate R&D culture to appreciate this approach.

The Information Science Experiment System - The computer for science experiments in space

NASA Technical Reports Server (NTRS)

Foudriat, Edwin C.; Husson, Charles

1989-01-01

The concept of the Information Science Experiment System (ISES), potential experiments, and system requirements are reviewed. The ISES is conceived as a computer resource in space whose aim is to assist computer, earth, and space science experiments, to develop and demonstrate new information processing concepts, and to provide an experiment base for developing new information technology for use in space systems. The discussion covers system hardware and architecture, operating system software, the user interface, and the ground communication link.

Design of an airborne lidar for stratospheric aerosol measurements

NASA Technical Reports Server (NTRS)

Evans, W. E.

1977-01-01

A modular, multiple-telescope receiving concept is developed to gain a relatively large receiver collection aperture without requiring extensive modifications to the aircraft. This concept, together with the choice of a specific photodetector, signal processing, and data recording system capable of maintaining approximately 1% precision over the required large signal amplitude range, is found to be common to all of the options. It is recommended that development of the lidar begin by more detailed definition of solutions to these important common signal detection and recording problems.

Functional requirements for onboard management of space shuttle consumables, volume 2.

NASA Technical Reports Server (NTRS)

Graf, P. J.; Herwig, H. A.; Neel, L. W.

1973-01-01

A study was conducted to develop the functional requirements for onboard management of space shuttle consumables. A specific consumables management concept for the space shuttle vehicle was developed and the functional requirements for the onboard portion of the concept were generated. Consumables management is the process of controlling or influencing the usage of expendable materials involved in vehicle subsystem operation. The subsystems considered in the study are: (1) propulsion, (2) power generation, and (3) environmental and life support.

The making of an instrument: from concept to market.

PubMed

Christoudias, G C

1998-01-01

This is an account of the steps one goes through in the development of a new device or instrument. It starts with the conditions that generate the need and then the concept of a new instrument and goes through the process of designing it and protecting it with a patent; it then proceeds through the development of a working prototype and a final refined product. It provides an outline of the steps needed to get the device into the national or international market by selling or licensing it to a company willing to develop it. To be able to demonstrate this process of invention and give real life to the steps involved in the making of an instrument as mentioned above, I describe the circumstances that generated the idea and the development of the Christoudias Tissue Approximator Grasper. The patent is published as issued to demonstrate its different components.

Nursing intellectual capital theory: operationalization and empirical validation of concepts.

PubMed

Covell, Christine L; Sidani, Souraya

2013-08-01

To present the operationalization of concepts in the nursing intellectual capital theory and the results of a methodological study aimed at empirically validating the concepts. The nursing intellectual capital theory proposes that the stocks of nursing knowledge in an organization are embedded in two concepts, nursing human capital and nursing structural capital. The theory also proposes that two concepts in the work environment, nurse staffing and employer support for nursing continuing professional development, influence nursing human capital. A cross-sectional design. A systematic three-step process was used to operationalize the concepts of the theory. In 2008, data were collected for 147 inpatient units from administrative departments and unit managers in 6 Canadian hospitals. Exploratory factor analyses were conducted to determine if the indicator variables accurately reflect their respective concepts. The proposed indicator variables collectively measured the nurse staffing concept. Three indicators were retained to construct nursing human capital: clinical expertise and experience concept. The nursing structural capital and employer support for nursing continuing professional development concepts were not validated empirically. The nurse staffing and the nursing human capital: clinical expertise and experience concepts will be brought forward for further model testing. Refinement for some of the indicator variables of the concepts is indicated. Additional research is required with different sources of data to confirm the findings. © 2012 Blackwell Publishing Ltd.

Fair-Minded Critical Thinking in Development Education: Reflections on Pedagogies for Transformation

ERIC Educational Resources Information Center

Brown, Eleanor J.

2014-01-01

This article discusses research with development education practitioners in Britain and Spain, to explore their conceptions of pedagogical approaches to development education and how these relate to transformative learning theory. Development education is a process designed to generate informed action, which implies the objective of transformation…

The Conduct of Development in Education. Occasional Paper 14.

ERIC Educational Resources Information Center

Schutz, Richard E.

The concept of development in education is examined, being defined as "the systematic use of scientific knowledge directed toward the production of useful materials, devices, systems, or methods, including design and development of prototypes and processes." Historical antecedents of present development are briefly discussed. Contrast is made…

Automated design synthesis of robotic/human workcells for improved manufacturing system design in hazardous environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Joshua M.

Manufacturing tasks that are deemed too hazardous for workers require the use of automation, robotics, and/or other remote handling tools. The associated hazards may be radiological or nonradiological, and based on the characteristics of the environment and processing, a design may necessitate robotic labor, human labor, or both. There are also other factors such as cost, ergonomics, maintenance, and efficiency that also effect task allocation and other design choices. Handling the tradeoffs of these factors can be complex, and lack of experience can be an issue when trying to determine if and what feasible automation/robotics options exist. To address thismore » problem, we utilize common engineering design approaches adapted more for manufacturing system design in hazardous environments. We limit our scope to the conceptual and embodiment design stages, specifically a computational algorithm for concept generation and early design evaluation. In regard to concept generation, we first develop the functional model or function structure for the process, using the common 'verb-noun' format for describing function. A common language or functional basis for manufacturing was developed and utilized to formalize function descriptions and guide rules for function decomposition. Potential components for embodiment are also grouped in terms of this functional language and are stored in a database. The properties of each component are given as quantitative and qualitative criteria. Operators are also rated for task-relevant criteria which are used to address task compatibility. Through the gathering of process requirements/constraints, construction of the component database, and development of the manufacturing basis and rule set, design knowledge is stored and available for computer use. Thus, once the higher level process functions are defined, the computer can automate the synthesis of new design concepts through alternating steps of embodiment and function structure updates/decomposition. In the process, criteria guide function allocation of components/operators and help ensure compatibility and feasibility. Through multiple function assignment options and varied function structures, multiple design concepts are created. All of the generated designs are then evaluated based on a number of relevant evaluation criteria: cost, dose, ergonomics, hazards, efficiency, etc. These criteria are computed using physical properties/parameters of each system based on the qualities an engineer would use to make evaluations. Nuclear processes such as oxide conversion and electrorefining are utilized to aid algorithm development and provide test cases for the completed program. Through our approach, we capture design knowledge related to manufacturing and other operations in hazardous environments to enable a computational program to automatically generate and evaluate system design concepts.« less

Consolidation of graphite thermoplastic textile preforms for primary aircraft structure

NASA Technical Reports Server (NTRS)

Suarez, J.; Mahon, J.

1991-01-01

The use of innovative cost effective material forms and processes is being considered for fabrication of future primary aircraft structures. Processes that have been identified as meeting these goals are textile preforms that use resin transfer molding (RTM) and consolidation forming. The Novel Composites for Wing and Fuselage Applications (NCWFA) program has as its objective the integration of innovative design concepts with cost effective fabrication processes to develop damage-tolerant structures that can perform at a design ultimate strain level of 6000 micro-inch/inch. In this on-going effort, design trade studies were conducted to arrive at advanced wing designs that integrate new material forms with innovative structural concepts and cost effective fabrication methods. The focus has been on minimizing part count (mechanical fasteners, clips, number of stiffeners, etc.), by using cost effective textile reinforcement concepts that provide improved damage tolerance and out-of-plane load capability, low-cost resin transfer molding processing, and thermoplastic forming concepts. The fabrication of representative Y spars by consolidation methods will be described. The Y spars were fabricated using AS4 (6K)/PEEK 150g commingled angle interlock 0/90-degree woven preforms with +45-degree commingled plies stitched using high strength Toray carbon thread and processed by autoclave consolidation.

Aspects of Piaget's cognitive developmental psychology and neurobiology of psychotic disorders - an integrative model.

PubMed

Gebhardt, Stefan; Grant, Phillip; von Georgi, Richard; Huber, Martin T

2008-09-01

Psychological, neurobiological and neurodevelopmental approaches have frequently been used to provide pathogenic concepts on psychotic disorders. However, aspects of cognitive developmental psychology have hardly been considered in current models. Using a hypothesis-generating approach an integration of these concepts was conducted. According to Piaget (1896-1980), assimilation and accommodation as forms of maintenance and modification of cognitive schemata represent fundamental processes of the brain. In general, based on the perceived input stimuli, cognitive schemata are developed resulting in a conception of the world, the realistic validity and the actuality of which is still being controlled and modified by cognitive adjustment processes. In psychotic disorders, however, a disproportion of environmental demands and the ability to activate required neuronal adaptation processes occurs. We therefore hypothesize a failure of the adjustment of real and requested output patterns. As a consequence autonomous cognitive schemata are generated, which fail to adjust with reality resulting in psychotic symptomatology. Neurobiological, especially neuromodulatory and neuroplastic processes play a central role in these perceptive and cognitive processes. In conclusion, integration of cognitive developmental psychology into the existing pathogenic concepts of psychotic disorders leads to interesting insights into basic disease mechanisms and also guides future research in the cognitive neuroscience of such disorders.

Space Station Mission Planning System (MPS) development study. Volume 2

NASA Technical Reports Server (NTRS)

Klus, W. J.

1987-01-01

The process and existing software used for Spacelab payload mission planning were studied. A complete baseline definition of the Spacelab payload mission planning process was established, along with a definition of existing software capabilities for potential extrapolation to the Space Station. This information was used as a basis for defining system requirements to support Space Station mission planning. The Space Station mission planning concept was reviewed for the purpose of identifying areas where artificial intelligence concepts might offer substantially improved capability. Three specific artificial intelligence concepts were to be investigated for applicability: natural language interfaces; expert systems; and automatic programming. The advantages and disadvantages of interfacing an artificial intelligence language with existing FORTRAN programs or of converting totally to a new programming language were identified.

The FOT tool kit concept

NASA Technical Reports Server (NTRS)

Fatig, Michael

1993-01-01

Flight operations and the preparation for it has become increasingly complex as mission complexities increase. Further, the mission model dictates that a significant increase in flight operations activities is upon us. Finally, there is a need for process improvement and economy in the operations arena. It is therefore time that we recognize flight operations as a complex process requiring a defined, structured, and life cycle approach vitally linked to space segment, ground segment, and science operations processes. With this recognition, an FOT Tool Kit consisting of six major components designed to provide tools to guide flight operations activities throughout the mission life cycle was developed. The major components of the FOT Tool Kit and the concepts behind the flight operations life cycle process as developed at NASA's GSFC for GSFC-based missions are addressed. The Tool Kit is therefore intended to increase productivity, quality, cost, and schedule performance of the flight operations tasks through the use of documented, structured methodologies; knowledge of past lessons learned and upcoming new technology; and through reuse and sharing of key products and special application programs made possible through the development of standardized key products and special program directories.

Low Cost Manufacturing of Composite Cryotanks

NASA Technical Reports Server (NTRS)

Meredith, Brent; Palm, Tod; Deo, Ravi; Munafo, Paul M. (Technical Monitor)

2002-01-01

This viewgraph presentation reviews research and development of cryotank manufacturing conducted by Northrup Grumman. The objectives of the research and development included the development and validation of manufacturing processes and technology for fabrication of large scale cryogenic tanks, the establishment of a scale-up and facilitization plan for full scale cryotanks, the development of non-autoclave composite manufacturing processes, the fabrication of subscale tank joints for element tests, the performance of manufacturing risk reduction trials for the subscale tank, and the development of full-scale tank manufacturing concepts.

Concept for a research project in early crustal genesis

NASA Technical Reports Server (NTRS)

Phillips, R. J. (Compiler); Ashwal, L. (Compiler)

1983-01-01

Planetary volatiles, physical and chemical planetary evolution, surface processes, planetary formation, metallogenesis, crustal features and their development, tectonics, and paleobiology are discussed.

Neurolinguistic approach to natural language processing with applications to medical text analysis.

PubMed

Duch, Włodzisław; Matykiewicz, Paweł; Pestian, John

2008-12-01

Understanding written or spoken language presumably involves spreading neural activation in the brain. This process may be approximated by spreading activation in semantic networks, providing enhanced representations that involve concepts not found directly in the text. The approximation of this process is of great practical and theoretical interest. Although activations of neural circuits involved in representation of words rapidly change in time snapshots of these activations spreading through associative networks may be captured in a vector model. Concepts of similar type activate larger clusters of neurons, priming areas in the left and right hemisphere. Analysis of recent brain imaging experiments shows the importance of the right hemisphere non-verbal clusterization. Medical ontologies enable development of a large-scale practical algorithm to re-create pathways of spreading neural activations. First concepts of specific semantic type are identified in the text, and then all related concepts of the same type are added to the text, providing expanded representations. To avoid rapid growth of the extended feature space after each step only the most useful features that increase document clusterization are retained. Short hospital discharge summaries are used to illustrate how this process works on a real, very noisy data. Expanded texts show significantly improved clustering and may be classified with much higher accuracy. Although better approximations to the spreading of neural activations may be devised a practical approach presented in this paper helps to discover pathways used by the brain to process specific concepts, and may be used in large-scale applications.

A comparative concept analysis of centring vs. opening meditation processes in health care.

PubMed

Birx, Ellen

2013-08-01

To report an analysis and comparison of the concepts centring and opening meditation processes in health care. Centring and opening meditation processes are included in nursing theories and frequently recommended in health care for stress management. These meditation processes are integrated into emerging psychotherapy approaches and there is a rapidly expanding body of neuroscience research distinguishing brain activity associated with different types of meditation. Currently, there is a lack of theoretical and conceptual clarity needed to guide meditation research in health care. A search of healthcare literature between 2006-2011 was conducted using Alt HealthWatch, CINAHL, PsychNET and PubMed databases using the keywords 'centring' and 'opening' alone and in combination with the term 'meditation.' For the concept centring, 10 articles and 11 books and for the concept opening 13 articles and 10 books were included as data sources. Rodgers' evolutionary method of concept analysis was used. Centring and opening are similar in that they both involve awareness in the present moment; both use a gentle, effortless approach; and both have a calming effect. Key differences include centring's focus on the individual's inner experience compared with the non-dual, spacious awareness of opening. Centring and opening are overlapping, yet distinct meditation processes. The term meditation cannot be used in a generic way in health care. The differences between centring and opening have important implications for the further development of unitary-transformative nursing theories. © 2012 Blackwell Publishing Ltd.

Conceptual design and structural analysis for an 8.4-m telescope

NASA Astrophysics Data System (ADS)

Mendoza, Manuel; Farah, Alejandro; Ruiz Schneider, Elfego

2004-09-01

This paper describes the conceptual design of the optics support structures of a telescope with a primary mirror of 8.4 m, the same size as a Large Binocular Telescope (LBT) primary mirror. The design goal is to achieve a structure for supporting the primary and secondary mirrors and keeping them joined as rigid as possible. With this purpose an optimization with several models was done. This iterative design process includes: specifications development, concepts generation and evaluation. Process included Finite Element Analysis (FEA) as well as other analytical calculations. Quality Function Deployment (QFD) matrix was used to obtain telescope tube and spider specifications. Eight spiders and eleven tubes geometric concepts were proposed. They were compared in decision matrixes using performance indicators and parameters. Tubes and spiders went under an iterative optimization process. The best tubes and spiders concepts were assembled together. All assemblies were compared and ranked according to their performance.

Automatic definition of the oncologic EHR data elements from NCIT in OWL.

PubMed

Cuggia, Marc; Bourdé, Annabel; Turlin, Bruno; Vincendeau, Sebastien; Bertaud, Valerie; Bohec, Catherine; Duvauferrier, Régis

2011-01-01

Semantic interoperability based on ontologies allows systems to combine their information and process them automatically. The ability to extract meaningful fragments from ontology is a key for the ontology re-use and the construction of a subset will help to structure clinical data entries. The aim of this work is to provide a method for extracting a set of concepts for a specific domain, in order to help to define data elements of an oncologic EHR. a generic extraction algorithm was developed to extract, from the NCIT and for a specific disease (i.e. prostate neoplasm), all the concepts of interest into a sub-ontology. We compared all the concepts extracted to the concepts encoded manually contained into the multi-disciplinary meeting report form (MDMRF). We extracted two sub-ontologies: sub-ontology 1 by using a single key concept and sub-ontology 2 by using 5 additional keywords. The coverage of sub-ontology 2 to the MDMRF concepts was 51%. The low rate of coverage is due to the lack of definition or mis-classification of the NCIT concepts. By providing a subset of concepts focused on a particular domain, this extraction method helps at optimizing the binding process of data elements and at maintaining and enriching a domain ontology.

FEA Simulation of Free-Bending - a Preforming Step in the Hydroforming Process Chain

NASA Astrophysics Data System (ADS)

Beulich, N.; Craighero, P.; Volk, W.

2017-09-01

High-strength steel and aluminum alloys are essential for developing innovative, lightly-weighted space frame concepts. The intended design is built from car body parts with high geometrical complexity and reduced material-thickness. Over the past few years, many complex car body parts have been produced using hydroforming. To increase the accuracy of hydroforming in relation to prospective car concepts, the virtual manufacturing of forming becomes more important. As a part of process digitalization, it is necessary to develop a simulation model for the hydroforming process chain. The preforming of longitudinal welded tubes is therefore implemented by the use of three-dimensional free-bending. This technique is able to reproduce complex deflection curves in combination with innovative low-thickness material design for hydroforming processes. As a first step to the complete process simulation, the content of this paper deals with the development of a finite element simulation model for the free-bending process with 6 degrees of freedom. A mandrel built from spherical segments connected by a steel rope is located inside of the tube to prevent geometrical instability. Critical parameters for the result of the bending process are therefore evaluated and optimized. The simulation model is verified by surface measurements of a two-dimensional bending test.

Self Help as an Adjunct to Psychotherapy: Issues of Awareness, Motivation, and Self Actualization.

ERIC Educational Resources Information Center

Desai, Hemant K.

The nature of the processes involved in the phenomena of psychological change and self-development as related to the concept of self-help and mutual aid are examined in this paper. Awareness, motivation, and self-actualization are seen as part of a fundamental process of growth and development. It is suggested that a parallel to the personal…

Entering the Era of Third Generation Services: A Comparative Study of Reforms in Social and Health Care Services

ERIC Educational Resources Information Center

Laitinen, Ilpo; Stenvall, Jari

2016-01-01

This article discusses what kinds of organisational and change processes take place when shifting to customer-oriented service concept, here called "third generation services". Our interest lies in the learning process that produces the development of services in cities and regions in new ways and how to develop services in practice so…

How do particle physicists learn the programming concepts they need?

NASA Astrophysics Data System (ADS)

Kluth, S.; Pia, M. G.; Schoerner-Sadenius, T.; Steinbach, P.

2015-12-01

The ability to read, use and develop code efficiently and successfully is a key ingredient in modern particle physics. We report the experience of a training program, identified as “Advanced Programming Concepts”, that introduces software concepts, methods and techniques to work effectively on a daily basis in a HEP experiment or other programming intensive fields. This paper illustrates the principles, motivations and methods that shape the “Advanced Computing Concepts” training program, the knowledge base that it conveys, an analysis of the feedback received so far, and the integration of these concepts in the software development process of the experiments as well as its applicability to a wider audience.

A conceptual model of incarcerated adolescent fatherhood: adolescent identity development and the concept of intersectionality.

PubMed

Shade, Kate; Kools, Susan; Weiss, Sandra J; Pinderhughes, Howard

2011-05-01

Little is known about teen fathers though they are found to be disproportionately represented among incarcerated youth. SOURCE USED: This article is developed from a qualitative pilot study of adolescent fathers in the justice system. The authors theorize about teen fathers and the process by which they accept, reject, or are "barriered" from a father identity and role. Adolescence as a developmental period during which an identity is forming is viewed in concert with the concept of hegemonic masculinity and the concept of intersectionality. Risk factors in childhood and adolescence complete the conceptual model through which incarcerated adolescent fathers can be examined. © 2011 Wiley Periodicals, Inc.

Galen: a third generation terminology tool to support a multipurpose national coding system for surgical procedures.

PubMed

Trombert-Paviot, B; Rodrigues, J M; Rogers, J E; Baud, R; van der Haring, E; Rassinoux, A M; Abrial, V; Clavel, L; Idir, H

1999-01-01

GALEN has developed a new generation of terminology tools based on a language independent concept reference model using a compositional formalism allowing computer processing and multiple reuses. During the 4th framework program project Galen-In-Use we applied the modelling and the tools to the development of a new multipurpose coding system for surgical procedures (CCAM) in France. On one hand we contributed to a language independent knowledge repository for multicultural Europe. On the other hand we support the traditional process for creating a new coding system in medicine which is very much labour consuming by artificial intelligence tools using a medically oriented recursive ontology and natural language processing. We used an integrated software named CLAW to process French professional medical language rubrics produced by the national colleges of surgeons into intermediate dissections and to the Grail reference ontology model representation. From this language independent concept model representation on one hand we generate controlled French natural language to support the finalization of the linguistic labels in relation with the meanings of the conceptual system structure. On the other hand the classification manager of third generation proves to be very powerful to retrieve the initial professional rubrics with different categories of concepts within a semantic network.

Aircraft Icing Weather Data Reporting and Dissemination System

NASA Technical Reports Server (NTRS)

Bass, Ellen J.; Minsk, Brian; Lindholm, Tenny; Politovich, Marcia; Reehorst, Andrew (Technical Monitor)

2002-01-01

The long-term operational concept of this research is to develop an onboard aircraft system that assesses and reports atmospheric icing conditions automatically and in a timely manner in order to improve aviation safety and the efficiency of aircraft operations via improved real-time and forecast weather products. The idea is to use current measurement capabilities on aircraft equipped with icing sensors and in-flight data communication technologies as a reporting source. Without requiring expensive avionics upgrades, aircraft data must be processed and available for downlink. Ideally, the data from multiple aircraft can then be integrated (along with other real-time and modeled data) on the ground such that aviation-centered icing hazard metrics for volumes of airspace can be assessed. As the effect of icing on different aircraft types can vary, the information should be displayed in meaningful ways such that multiple types of users can understand the information. That is, information must be presented in a manner to allow users to understand the icing conditions with respect to individual concerns and aircraft capabilities. This research provides progress toward this operational concept by: identifying an aircraft platform capable of digitally capturing, processing, and downlinking icing data; identifying the required in situ icing data processing; investigating the requirements for routing the icing data for use by weather products; developing an icing case study in order to gain insight into major air carrier needs; developing and prototyping icing display concepts based on the National Center for Atmospheric Research's existing diagnostic and forecast experimental icing products; and conducting a usability study for the prototyped icing display concepts.

Extension of quality-by-design concept to the early development phase of pharmaceutical R&D processes.

PubMed

Csóka, Ildikó; Pallagi, Edina; Paál, Tamás L

2018-03-27

Here, we propose the extension of the quality-by-design (QbD) concept to also fit the early development phases of pharmaceuticals by adding elements that are currently widely applied, but not yet included in the QbD model in a structured way. These are the introduction of a 'zero' preformulation phase (i.e., selection of drug substance, possible dosage forms and administration routes based on the evaluated therapeutic need); building in stakeholders' (industry, patient, and regulatory) requirements into the quality target product profile (QTTP); and the use of modern quality management tools during the composition and process design phase [collecting critical quality attributes (CQAs) and selection of CPPs) for (still laboratory-scale) design space (DS) development. Moreover, during industrial scale-up, CQAs (as well as critical process parameters; CPPs) can be changed; however, we recommend that the existing QbD elements are reconsidered and updated after this phase. Copyright © 2018 Elsevier Ltd. All rights reserved.

Defining bioterrorism preparedness for nurses: concept analysis.

PubMed

Rebmann, Terri

2006-06-01

This paper reports a concept analysis to define the concept of nursing bioterrorism preparedness. Nursing bioterrorism preparedness is necessary, yet no theoretical or operational definition exists. The concept is often misinterpreted as being synonymous with organizational preparedness or confused with the bioterrorism preparedness needs of other professions, such as medicine. There is no standardized definition of the concept that is specific to the profession of nursing. A concept analysis was conducted using a systematic literature review; the Cumulative Index to Nursing and Allied Health Literature, Psych Info and Medline databases for years 1966-2005 were used. One hundred and eighteen references were identified, 41 of which were deemed relevant. Data from the 41 relevant articles were analysed and synthesized to develop a theoretical definition, defining attributes, antecedents, consequences and related concepts. Nursing bioterrorism preparedness is the continual process of nurses becoming better prepared to recognize and respond to a bioterrorism attack. Nurses, regardless of their level of education, areas of expertise or practice settings must participate in at least one educational session and one exercise each year to meet the minimum requirements of engaging in the bioterrorism preparedness process. The antecedents are acceptance and readiness to change. Defining attributes include gaining knowledge, planning, practising response behaviours and evaluating knowledge level and content of response plan. Consequences include recognition of an event and implementation of appropriate response actions. Nursing bioterrorism preparedness is essential. To assess nurses' level of preparedness, a definition is needed of what bioterrorism preparedness means to the profession. The theoretical definition developed in this paper needs to be further refined and operationalized.

Operationalizing Sustainable Development Suncor Energy Inc: A critical case

NASA Astrophysics Data System (ADS)

Fergus, Andrew

The concept of Sustainable Development is often understood as a framework within which organizations are able to move forward in a successful and beneficial manner. However, it is also seen as an ambiguous notion with little substance beyond a hopeful dialogue. If we are to base organizational action upon the concepts of Sustainable Development, it is vital that we comprehend the implications of how the concept is understood at a behavioral level. Industry leaders, competitors, shareholders, and stakeholders recognize Suncor Energy Inc as a leading organization within the Oil and Gas energy field. In particular it has a reputation for proactive thinking and action within the areas of environmental and social responsibility. Through attempting to integrate the ideas of Sustainable Development at a foundational level into the strategic plan, the management of Suncor Energy Inc has committed the organization to be a sustainable energy company. To achieve this vision the organization faces the challenge of converting strategic goals into operational behaviors, a process critical for a successful future. This research focuses on understanding the issues found with this conversion process. Through exploring a critical case, this research illuminates the reality of a best-case scenario. The findings thus have implications for both Suncor Energy Inc and more importantly all other organizations attempting to move in a Sustainable Development direction.

Concept Analysis and the Advance of Nursing Knowledge: State of the Science.

PubMed

Rodgers, Beth L; Jacelon, Cynthia S; Knafl, Kathleen A

2018-04-24

Despite an overwhelming increase in the number of concept analyses published since the early 1970s, there are significant limitations to the impact of this work in promoting progress in nursing science. We conducted an extensive review of concept analyses published between 1972 and 2017 to identify patterns in analysis and followed this with exploration of an exemplar related to the concept of normalization to demonstrate the capabilities of analysis for promoting concept development and progress. Scoping review of peer-reviewed literature published in the Cumulative Index to Nursing and Allied Health Literature (CINAHL) in which the terms "concept analysis," "concept clarification," and "concept derivation" appeared in any part of the reference. The original search returned 3,489 articles. This initial pool was refined to a final sample of 958 articles published in 223 journals and addressing 604 concepts. A review of citations of the original analysis of the concept of normalization resulted in 75 articles selected for closer examination of the process of concept development. Review showed a clear pattern of repetition of analysis of the same concept, growth in number of published analyses, preponderance of first authors with master's degrees, and 43 distinct descriptions of methods. Review of the 75 citations to the normalization analysis identified multiple ways concept analysis can inform subsequent research and theory development. Conceptual work needs to move beyond the level of "concept analysis" involving clear linkage to the resolution of problems in the discipline. Conceptual work is an important component of progress in the knowledge base of a discipline, and more effective use of concept development activities are needed to maximize the potential of this important work. It is important to the discipline that we facilitate progress in nursing science on a theoretical and conceptual level as a part of cohesive and systematic development of the discipline. The absence of effective concepts impedes the ability to recognize, discuss, define, and conduct studies important to clinical practice and research. This article reflects the pressing need as well as the potential for concept analysis work to be approached in a way that promotes nursing science and enables conceptually sound research to improve clinical care. © 2018 Sigma Theta Tau International.

Computer Aided Teaching of Digital Signal Processing.

ERIC Educational Resources Information Center

Castro, Ian P.

1990-01-01

Describes a microcomputer-based software package developed at the University of Surrey for teaching digital signal processing to undergraduate science and engineering students. Menu-driven software capabilities are explained, including demonstration of qualitative concepts and experimentation with quantitative data, and examples are given of…

PROCESS INTENSIFICATION: MICROWAVE INITIATED REACTIONS USING A CONTINUOUS FLOW REACTOR

EPA Science Inventory

The concept of process intensification has been used to develop a continuous narrow channel reactor at Clarkson capable of carrying out reactions under isothermal conditions whilst being exposed to microwave (MW) irradiation thereby providing information on the true effect of mi...

Software Configuration Management Guidebook

NASA Technical Reports Server (NTRS)

1995-01-01

The growth in cost and importance of software to NASA has caused NASA to address the improvement of software development across the agency. One of the products of this program is a series of guidebooks that define a NASA concept of the assurance processes which are used in software development. The Software Assurance Guidebook, SMAP-GB-A201, issued in September, 1989, provides an overall picture of the concepts and practices of NASA in software assurance. Lower level guidebooks focus on specific activities that fall within the software assurance discipline, and provide more detailed information for the manager and/or practitioner. This is the Software Configuration Management Guidebook which describes software configuration management in a way that is compatible with practices in industry and at NASA Centers. Software configuration management is a key software development process, and is essential for doing software assurance.

Concept-Development of a Structure Supported Membrane for Deployable Space Applications - From Nature to Manufacture and Testing

NASA Technical Reports Server (NTRS)

Zander, Martin; Belvin, W. K.

2012-01-01

Current space applications of membrane structures include large area solar power arrays, solar sails, antennas, and numerous other large aperture devices like the solar shades of the new James Webb Space Telescope. These expandable structural systems, deployed in-orbit to achieve the desired geometry, are used to collect, reflect and/or transmit electromagnetic radiation. This work, a feasibility study supporting a diploma thesis, describes the systematic process for developing a biologically inspired concept for a structure supported (integrated) membrane, that features a rip stop principle, makes self-deployment possible and is part of an ultra-light weight space application. Novel manufacturing of membrane prototypes and test results are presented for the rip-stop concepts. Test data showed that the new membrane concept has a higher tear resistance than neat film of equivalent mass.

Development and flight test of a helicopter compact, portable, precision landing system concept

NASA Technical Reports Server (NTRS)

Clary, G. R.; Bull, J. S.; Davis, T. J.; Chisholm, J. P.

1984-01-01

An airborne, radar-based, precision approach concept is being developed and flight tested as a part of NASA's Rotorcraft All-Weather Operations Research Program. A transponder-based beacon landing system (BLS) applying state-of-the-art X-band radar technology and digital processing techniques, was built and is being flight tested to demonstrate the concept feasibility. The BLS airborne hardware consists of an add-on microprocessor, installed in conjunction with the aircraft weather/mapping radar, which analyzes the radar beacon receiver returns and determines range, localizer deviation, and glide-slope deviation. The ground station is an inexpensive, portable unit which can be quickly deployed at a landing site. Results from the flight test program show that the BLS concept has a significant potential for providing rotorcraft with low-cost, precision instrument approach capability in remote areas.

RLV/X-33 operations overview

NASA Astrophysics Data System (ADS)

Black, Stephen T.; Eshleman, Wally

1997-01-01

This paper describes the VentureStar™ SSTO RLV and X-33 operations concepts. Applications of advanced technologies, automated ground support systems, advanced aircraft and launch vehicle lessons learned have been integrated to develop a streamlined vehicle and mission processing concept necessary to meet the goals of a commercial SSTO RLV. These concepts will be validated by the X-33 flight test program where financial and technical risk mitigation are required. The X-33 flight test program totally demonstrates the vehicle performance, technology, and efficient ground operations at the lowest possible cost. The Skunk Work's test program approach and test site proximity to the production plant are keys. The X-33 integrated flight and ground test program incrementally expands the knowledge base of the overall system allowing minimum risk progression to the next flight test program milestone. Subsequent X-33 turnaround processing flows will be performed with an aircraft operations philosophy. The differences will be based on research and development, component reliability and flight test requirements.

The Significance of an Enhanced Concept of the Organism for Medicine

PubMed Central

2016-01-01

Recent developments in evolutionary biology, comparative embryology, and systems biology suggest the necessity of a conceptual shift in the way we think about organisms. It is becoming increasingly evident that molecular and genetic processes are subject to extremely refined regulation and control by the cell and the organism, so that it becomes hard to define single molecular functions or certain genes as primary causes of specific processes. Rather, the molecular level is integrated into highly regulated networks within the respective systems. This has consequences for medical research in general, especially for the basic concept of personalized medicine or precision medicine. Here an integrative systems concept is proposed that describes the organism as a multilevel, highly flexible, adaptable, and, in this sense, autonomous basis for a human individual. The hypothesis is developed that these properties of the organism, gained from scientific observation, will gradually make it necessary to rethink the conceptual framework of physiology and pathophysiology in medicine. PMID:27446221

Development of a student-centered instrument to assess middle school students' conceptual understanding of sound

NASA Astrophysics Data System (ADS)

Eshach, Haim

2014-06-01

This article describes the development and field test of the Sound Concept Inventory Instrument (SCII), designed to measure middle school students' concepts of sound. The instrument was designed based on known students' difficulties in understanding sound and the history of science related to sound and focuses on two main aspects of sound: sound has material properties, and sound has process properties. The final SCII consists of 71 statements that respondents rate as either true or false and also indicate their confidence on a five-point scale. Administration to 355 middle school students resulted in a Cronbach alpha of 0.906, suggesting a high reliability. In addition, the average percentage of students' answers to statements that associate sound with material properties is significantly higher than the average percentage of statements associating sound with process properties (p <0.001). The SCII is a valid and reliable tool that can be used to determine students' conceptions of sound.

Sustainability: an evolutionary concept analysis. Exploring nursing's role within the sustainability movement.

PubMed

McMillan, Kimberly

2014-04-01

This paper aimed to explore the evolution of the concept of sustainability to facilitate further knowledge development in the discipline of nursing. The concept of 'sustainability' emerged in the 1950s as a result of the environmental movement. The concept has been adapted by the discipline of management and is increasingly discussed in the context of health care. The concept remains ambiguous in the discipline of nursing, resulting in a struggle to articulate the role of nursing in the sustainability movement. Rodgers evolutionary method of concept analysis was used. Literature was searched from 1987-2011, including English, peer reviewed texts in the databases CINAHL and ABI/INFORM global. Two book chapters and grey literature were also included. References were read and analysed according to antecedents, attributes, consequences, surrogate terms and related terms. Defining antecedents, attributes and consequences highlight the complexity and diversity of the concept. Attributes include: sustainability as a condition of change, as process, as outcome, as dependent of multiple stakeholders, and as social consciousness. 'Sustainability' is a fragile concept highly dependent on the processes and stakeholders involved in its fruition. There is a distinct difference in the level of concept clarity between the disciplines of management and nursing. The complexities associated with the concept of 'Sustainability' have led to its ambiguity. Nursing must, however, work to further clarify the concept to fully understand nursing's potential role in the sustainability movement. © 2013 John Wiley & Sons Ltd.

Locating relevant patient information in electronic health record data using representations of clinical concepts and database structures.

PubMed

Pan, Xuequn; Cimino, James J

2014-01-01

Clinicians and clinical researchers often seek information in electronic health records (EHRs) that are relevant to some concept of interest, such as a disease or finding. The heterogeneous nature of EHRs can complicate retrieval, risking incomplete results. We frame this problem as the presence of two gaps: 1) a gap between clinical concepts and their representations in EHR data and 2) a gap between data representations and their locations within EHR data structures. We bridge these gaps with a knowledge structure that comprises relationships among clinical concepts (including concepts of interest and concepts that may be instantiated in EHR data) and relationships between clinical concepts and the database structures. We make use of available knowledge resources to develop a reproducible, scalable process for creating a knowledge base that can support automated query expansion from a clinical concept to all relevant EHR data.

Concept Analysis of Illness Engulfment in Schizophrenia.

PubMed

Vining, Danny; Robinson, Jennifer C

2016-06-01

Schizophrenia has a significant risk of damaging an individual's self-concept. Through the process of illness engulfment an individual's self-concept becomes reorganized entirely around the experience of having schizophrenia. The purpose of this manuscript is to clarify the structure and function of the concept of illness engulfment in schizophrenia using Walker and Avant's (2011) method of concept analysis. Data came from a review of scholarly literature, as well as contemporary and historical art, literature, music, and other media forms. The analysis discussed two defining attributes of experience of illness and impact on self-concept with a total of seven indicators. The article listed antecedents, consequences, and discussed the Modified Engulfment Scale as empirical referents. Fictional cases were developed to illustrate the concept. Finally, the concept of illness engulfment was discussed within the framework of the Roy Adaptation Model. Copyright © 2016 Elsevier Inc. All rights reserved.

Integrative Structural Biomechanical Concepts of Ankylosing Spondylitis

PubMed Central

Masi, Alfonse T.; Nair, Kalyani; Andonian, Brian J.; Prus, Kristina M.; Kelly, Joseph; Sanchez, Jose R.; Henderson, Jacqueline

2011-01-01

Ankylosing spondylitis (AS) is not fully explained by inflammatory processes. Clinical, epidemiological, genetic, and course of disease features indicate additional host-related risk processes and predispositions. Collectively, the pattern of predisposition to onset in adolescent and young adult ages, male preponderance, and widely varied severity of AS is unique among rheumatic diseases. However, this pattern could reflect biomechanical and structural differences between the sexes, naturally occurring musculoskeletal changes over life cycles, and a population polymorphism. During juvenile development, the body is more flexible and weaker than during adolescent maturation and young adulthood, when strengthening and stiffening considerably increase. During middle and later ages, the musculoskeletal system again weakens. The novel concept of an innate axial myofascial hypertonicity reflects basic mechanobiological principles in human function, tissue reactivity, and pathology. However, these processes have been little studied and require critical testing. The proposed physical mechanisms likely interact with recognized immunobiological pathways. The structural biomechanical processes and tissue reactions might possibly precede initiation of other AS-related pathways. Research in the combined structural mechanobiology and immunobiology processes promises to improve understanding of the initiation and perpetuation of AS than prevailing concepts. The combined processes might better explain characteristic enthesopathic and inflammatory processes in AS. PMID:22216409

Comparison of resin film infusion, resin transfer molding, and consolidation of textile preforms for primary aircraft structure

NASA Technical Reports Server (NTRS)

Suarez, J.; Dastin, S.

1992-01-01

Innovative design concepts and cost effective fabrication processes were developed for damage tolerant primary structures that can perform at a design ultimate strain level of 6000 micro inch/inch. Attention focused on the use of textile high performance fiber reinforcement concepts that provide improved damage tolerance and out-of-plane load capability, low cost resin film infusion (RFI) and resin transfer molding (RTM) processes, and thermoplastic forming concepts. The fabrication of wing 'Y' spars by four different materials and/or processes methods is described: fabricated using IM7 angle interlock 0 to 90 deg woven preforms with + or - 45 deg plies stitched with Toray high strength graphite thread and processed using RFI and 3501-6 epoxy; fabricated using G40-800 knitted/stitched preforms and processed using RFI and 3501-6 epoxy; fabricated using G40-800 knitted/stitched preforms using RTM and Tactix 123/H41 epoxy; and fabricated preforms using AS4(6K)/PEEK 150 g commingled angle interlock 0 to 90 deg woven preforms with + or - 45 deg commingled plies stitched using high strength graphite thread and processed by consolidation. Structural efficiency, processability, and acquisition cost are compared.

DEVELOPMENT AND APPLICATION OF PLANNING PROCESS TO ACHIEVE SUSTAINABILITY

EPA Science Inventory

Concepts of sustainability are numerous, widely discussed, and necessary, but sustainability needs to be applied to development projects to succeed. However, few applications are made and their measures are unclear. Sustainability indicators are typically used as measures, but ...

Social Metaphorical Mapping of the Concept of Force "CHI-KA-RA" in Japanese

ERIC Educational Resources Information Center

Suzuki, Mariko

2005-01-01

This research focused on the concept of "force" ("CHI-KA-RA" in Japanese) in Newtonian mechanics. The primary objective was to develop a tool, based on metaphor, to interpret student thinking in learning scientific topics. The study provides an example of using the tool to trace the process of mutual changes in thinking during a dialog among…

Bildung and Subject Didactics: Exploring a Classical Concept for Building New Insights

ERIC Educational Resources Information Center

Schneuwly, Bernard; Vollmer, Helmut Johannes

2018-01-01

In the beginning of the 19th century, Humboldt defined Bildung as both process and product of the developing person. In this contribution we discuss how this classical concept may be used for defining subject didactics. We use two complementary approaches to answer it: a historical analysis, and the construction of a theoretical model. 1)…

Understanding Randomness and Its Impact on Student Learning: Lessons Learned from Building the Biology Concept Inventory (BCI)

ERIC Educational Resources Information Center

Garvin-Doxas, Kathy; Klymkowsky, Michael W.

2008-01-01

While researching student assumptions for the development of the Biology Concept Inventory (BCI; http://bioliteracy.net), we found that a wide class of student difficulties in molecular and evolutionary biology appears to be based on deep-seated, and often unaddressed, misconceptions about random processes. Data were based on more than 500…

Three-Dimensionality as an Effective Mode of Representation for Expressing Sequential Time Perception

ERIC Educational Resources Information Center

Eden, Sigal; Passig, David

2007-01-01

The process of developing concepts of time continues from age 5 to 11 years (Zakay, 1998). This study sought the representation mode in which children could best express time concepts, especially the proper arrangement of events in a logical and temporal order. Usually, temporal order is examined and taught by 2D (2-dimensional) pictorial scripts.…

The Individualization of Consumption: A Trojan Horse in the Destruction of the Public Sector?

ERIC Educational Resources Information Center

Bottery, Michael

2005-01-01

This article, through an investigation of the development of the concept of the "consumer", argues that recent thinking on consumerism is likely to radically change the metaphors and processes of much business management, and that these changes are likely to feed through into further calls for a restructuring of concepts and practices in the…

GAMMON: An Approach to the Concept of Strategy in Game-Playing Programs.

ERIC Educational Resources Information Center

Bushey, William Edward

In order to investigate the use of strategies in a game-playing computer program, "Gammon," a computer program that plays Backgammon, was developed. It focuses on the play of a given strategy, as well as the process of strategy selection, and examines the concept of strategy as an integrating and driving force in the play of a game. A…

Constructing the integral concept on the basis of the idea of accumulation: suggestion for a high school curriculum

NASA Astrophysics Data System (ADS)

Kouropatov, Anatoli; Dreyfus, Tommy

2013-07-01

Students have a tendency to see integral calculus as a series of procedures with associated algorithms and many do not develop a conceptual grasp giving them the desirable versatility of thought. Thus, instead of a proceptual view of the symbols in integration, they have, at best, a process-oriented view. On the other hand, it is not surprising that many students find concepts such as the integral difficult when they are unable to experience these processes directly in the classroom. With a view towards improving this situation, constructing the integral concept on the basis of the idea of accumulation has been proposed (Educ Stud Math. 1994;26:229-274; Integral as accumulation: a didactical perspective for school mathematics; Thessaloniki: PME; 2009. p. 417-424). In this paper, we discuss a curriculum that is based on this idea and a design for curriculum materials that are intended to develop an improved cognitive base for a flexible proceptual understanding of the integral and integration in high school. The main focus is on how we (mathematics teachers and mathematics educators) might teach the integral concept in order to help high school students to construct meaningful knowledge alongside acquiring technical abilities.

Sampling the food processing environment: taking up the cudgel for preventive quality management in food processing environments.

PubMed

Wagner, Martin; Stessl, Beatrix

2014-01-01

The Listeria monitoring program for Austrian cheese factories was established in 1988. The basic idea is to control the introduction of L. monocytogenes into the food processing environment, preventing the pathogen from contaminating the food under processing. The Austrian Listeria monitoring program comprises four levels of investigation, dealing with routine monitoring of samples and consequences of finding a positive sample. Preventive quality control concepts attempt to detect a foodborne hazard along the food processing chain, prior to food delivery, retailing, and consumption. The implementation of a preventive food safety concept provokes a deepened insight by the manufacturers into problems concerning food safety. The development of preventive quality assurance strategies contributes to the national food safety status and protects public health.

Integer, fractional, and anomalous quantum Hall effects explained with Eyring's rate process theory and free volume concept.

PubMed

Hao, Tian

2017-02-22

The Hall effects, especially the integer, fractional and anomalous quantum Hall effects, have been addressed using Eyring's rate process theory and free volume concept. The basic assumptions are that the conduction process is a common rate controlled "reaction" process that can be described with Eyring's absolute rate process theory; the mobility of electrons should be dependent on the free volume available for conduction electrons. The obtained Hall conductivity is clearly quantized as with prefactors related to both the magnetic flux quantum number and the magnetic quantum number via the azimuthal quantum number, with and without an externally applied magnetic field. This article focuses on two dimensional (2D) systems, but the approaches developed in this article can be extended to 3D systems.

What do we mean by "older adults' persistent pain self-management"? A concept analysis.

PubMed

Stewart, Carrie; Schofield, Pat; Elliott, Alison M; Torrance, Nicola; Leveille, Suzanne

2014-02-01

No standard definition exists for the concept "persistent pain self-management" or how it should be defined in relation to older adults. Poorly defined concepts can result in misunderstandings in the clinical setting and can hinder research through difficulties identifying or measuring the concept. To ascertain attributes, referents, antecedents, and consequences of the concept older adults' persistent pain self-management and develop a theoretical definition. Rodgers evolutionary model of concept analysis was used to systematically analyze articles from the academic and grey literature (N = 45). Data were extracted using standardized extraction forms and analyzed using thematic analysis. This concept was discussed in three ways: as an intervention, in reference to everyday behaviors, and as an outcome. Five defining attributes were identified: multidimensional process, personal development, active individuals, symptom response, and symptom control. Patients' perceived need and ability to manage pain with support from others is necessary for pain self-management to occur. Numerous physical, psychological, and social health consequences were identified. A theoretical definition is discussed. Our findings have clarified existing use and understanding regarding the concept of older adults' persistent pain self-management. We have identified three areas for future development: refinement of the attributes of this concept within the context of older adults, an exploration of how providers can overcome difficulties supporting older adults' persistent pain self-management, and a clarification of the overall theoretical framework of older adults' persistent pain self-management. Wiley Periodicals, Inc.

Development of in situ product removal strategies in biocatalysis applying scaled-down unit operations.

PubMed

Heintz, Søren; Börner, Tim; Ringborg, Rolf H; Rehn, Gustav; Grey, Carl; Nordblad, Mathias; Krühne, Ulrich; Gernaey, Krist V; Adlercreutz, Patrick; Woodley, John M

2017-03-01

An experimental platform based on scaled-down unit operations combined in a plug-and-play manner enables easy and highly flexible testing of advanced biocatalytic process options such as in situ product removal (ISPR) process strategies. In such a platform, it is possible to compartmentalize different process steps while operating it as a combined system, giving the possibility to test and characterize the performance of novel process concepts and biocatalysts with minimal influence of inhibitory products. Here the capabilities of performing process development by applying scaled-down unit operations are highlighted through a case study investigating the asymmetric synthesis of 1-methyl-3-phenylpropylamine (MPPA) using ω-transaminase, an enzyme in the sub-family of amino transferases (ATAs). An on-line HPLC system was applied to avoid manual sample handling and to semi-automatically characterize ω-transaminases in a scaled-down packed-bed reactor (PBR) module, showing MPPA as a strong inhibitor. To overcome the inhibition, a two-step liquid-liquid extraction (LLE) ISPR concept was tested using scaled-down unit operations combined in a plug-and-play manner. Through the tested ISPR concept, it was possible to continuously feed the main substrate benzylacetone (BA) and extract the main product MPPA throughout the reaction, thereby overcoming the challenges of low substrate solubility and product inhibition. The tested ISPR concept achieved a product concentration of 26.5 g MPPA  · L -1 , a purity up to 70% g MPPA  · g tot -1 and a recovery in the range of 80% mol · mol -1 of MPPA in 20 h, with the possibility to increase the concentration, purity, and recovery further. Biotechnol. Bioeng. 2017;114: 600-609. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Laser processes and system technology for the production of high-efficient crystalline solar cells

NASA Astrophysics Data System (ADS)

Mayerhofer, R.; Hendel, R.; Zhu, Wenjie; Geiger, S.

2012-10-01

The laser as an industrial tool is an essential part of today's solar cell production. Due to the on-going efforts in the solar industry, to increase the cell efficiency, more and more laser-based processes, which have been discussed and tested at lab-scale for many years, are now being implemented in mass production lines. In order to cope with throughput requirements, standard laser concepts have to be improved continuously with respect to available average power levels, repetition rates or beam profile. Some of the laser concepts, that showed high potential in the past couple of years, will be substituted by other, more economic laser types. Furthermore, requirements for processing with less-heat affected zones fuel the development of industry-ready ultra short pulsed lasers with pulse widths even below the picosecond range. In 2011, the German Ministry of Education and Research (BMBF) had launched the program "PV-Innovation Alliance", with the aim to support the rapid transfer of high-efficiency processes out of development departments and research institutes into solar cell production lines. Here, lasers play an important role as production tools, allowing the fast implementation of high-performance solar cell concepts. We will report on the results achieved within the joint project FUTUREFAB, where efficiency optimization, throughput enhancement and cost reduction are the main goals. Here, the presentation will focus on laser processes like selective emitter doping and ablation of dielectric layers. An indispensable part of the efforts towards cost reduction in solar cell production is the improvement of wafer handling and throughput capabilities of the laser processing system. Therefore, the presentation will also elaborate on new developments in the design of complete production machines.

30/20 GHz communications systems baseband processor development

NASA Astrophysics Data System (ADS)

Brown, L.; Sabourin, D.; Stilwell, J.; McCallister, R.; Borota, M.

The architecture and system design concepts for a commercial satellite communications system planned for the 1990's has been developed. The system provides data communications between the individual users via trunking and customer premise service terminals utilizing a central switching satellite operating in a time-division multiple-access mode. Baseband processing is employed to route and control traffic on an individual message basis while providing significant advantages in improved link margins and system flexibility. Key technology developments required to prove the flight readiness of the baseband processor design are being verified in the baseband processor proof-of-concept model described herein.

30/20 GHz communications systems baseband processor development

NASA Technical Reports Server (NTRS)

Brown, L.; Sabourin, D.; Stilwell, J.; Mccallister, R.; Borota, M.

1982-01-01

The architecture and system design concepts for a commercial satellite communications system planned for the 1990's has been developed. The system provides data communications between the individual users via trunking and customer premise service terminals utilizing a central switching satellite operating in a time-division multiple-access mode. Baseband processing is employed to route and control traffic on an individual message basis while providing significant advantages in improved link margins and system flexibility. Key technology developments required to prove the flight readiness of the baseband processor design are being verified in the baseband processor proof-of-concept model described herein.

Application of simplified Complexity Theory concepts for healthcare social systems to explain the implementation of evidence into practice.

PubMed

Chandler, Jacqueline; Rycroft-Malone, Jo; Hawkes, Claire; Noyes, Jane

2016-02-01

To examine the application of core concepts from Complexity Theory to explain the findings from a process evaluation undertaken in a trial evaluating implementation strategies for recommendations about reducing surgical fasting times. The proliferation of evidence-based guidance requires a greater focus on its implementation. Theory is required to explain the complex processes across the multiple healthcare organizational levels. This social healthcare context involves the interaction between professionals, patients and the organizational systems in care delivery. Complexity Theory may provide an explanatory framework to explain the complexities inherent in implementation in social healthcare contexts. A secondary thematic analysis of qualitative process evaluation data informed by Complexity Theory. Seminal texts applying Complexity Theory to the social context were annotated, key concepts extracted and core Complexity Theory concepts identified. These core concepts were applied as a theoretical lens to provide an explanation of themes from a process evaluation of a trial evaluating the implementation of strategies to reduce surgical fasting times. Sampled substantive texts provided a representative spread of theoretical development and application of Complexity Theory from late 1990's-2013 in social science, healthcare, management and philosophy. Five Complexity Theory core concepts extracted were 'self-organization', 'interaction', 'emergence', 'system history' and 'temporality'. Application of these concepts suggests routine surgical fasting practice is habituated in the social healthcare system and therefore it cannot easily be reversed. A reduction to fasting times requires an incentivised new approach to emerge in the surgical system's priority of completing the operating list. The application of Complexity Theory provides a useful explanation for resistance to change fasting practice. Its utility in implementation research warrants further attention and evaluation. © 2015 John Wiley & Sons Ltd.

Synergy of the Developed 6D BIM Framework and Conception of the nD BIM Framework and nD BIM Process Ontology

ERIC Educational Resources Information Center

O'Keeffe, Shawn Edward

2013-01-01

The author developed a unified nD framework and process ontology for Building Information Modeling (BIM). The research includes a framework developed for 6D BIM, nD BIM, and nD ontology that defines the domain and sub-domain constructs for future nD BIM dimensions. The nD ontology defines the relationships of kinds within any new proposed…

[Technology development as social process: prospects and frontiers of social scientific elucidation of technological advancement].

PubMed

Dierkes, M

1990-05-01

This article provides an overview of the new developments in social scientific technology research which have changed considerably as a result of public debate and reactions to the importance of advancements in technology. The shift in emphasis, away from the effects of technology to its shaping, is described and certain hypotheses and concepts of advancement in the study of the social conditions underlying technical development processes are presented.

How concept images affect students' interpretations of Newton's method

NASA Astrophysics Data System (ADS)

Engelke Infante, Nicole; Murphy, Kristen; Glenn, Celeste; Sealey, Vicki

2018-07-01

Knowing when students have the prerequisite knowledge to be able to read and understand a mathematical text is a perennial concern for instructors. Using text describing Newton's method and Vinner's notion of concept image, we exemplify how prerequisite knowledge influences understanding. Through clinical interviews with first-semester calculus students, we determined how evoked concept images of tangent lines and roots contributed to students' interpretation and application of Newton's method. Results show that some students' concept images of root and tangent line developed throughout the interview process, and most students were able to adequately interpret the text on Newton's method. However, students with insufficient concept images of tangent line and students who were unwilling or unable to modify their concept images of tangent line after reading the text were not successful in interpreting Newton's method.

Role of System Architecture in Architecture in Developing New Drafting Tools

NASA Astrophysics Data System (ADS)

Sorguç, Arzu Gönenç

In this study, the impact of information technologies in architectural design process is discussed. In this discussion, first the differences/nuances between the concept of software engineering and system architecture are clarified. Then, the design process in engineering, and design process in architecture has been compared by considering 3-D models as the center of design process over which the other disciplines involve the design. It is pointed out that in many high-end engineering applications, 3-D solid models and consequently digital mock-up concept has become a common practice. But, architecture as one of the important customers of CAD systems employing these tools has not started to use these 3-D models. It is shown that the reason of this time lag between architecture and engineering lies behind the tradition of design attitude. Therefore, it is proposed a new design scheme a meta-model to develop an integrated design model being centered on 3-D model. It is also proposed a system architecture to achieve the transformation of architectural design process by replacing 2-D thinking with 3-D thinking. It is stated that in the proposed system architecture, the CAD systems are included and adapted for 3-D architectural design in order to provide interfaces for integration of all possible disciplines to design process. It is also shown that such a change will allow to elaborate the intelligent or smart building concept in future.

Early Developmental Conditioning of Later Health and Disease: Physiology or Pathophysiology?

PubMed Central

Hanson, M. A.; Gluckman, P. D.

2014-01-01

Extensive experimental animal studies and epidemiological observations have shown that environmental influences during early development affect the risk of later pathophysiological processes associated with chronic, especially noncommunicable, disease (NCD). This field is recognized as the developmental origins of health and disease (DOHaD). We discuss the extent to which DOHaD represents the result of the physiological processes of developmental plasticity, which may have potential adverse consequences in terms of NCD risk later, or whether it is the manifestation of pathophysiological processes acting in early life but only becoming apparent as disease later. We argue that the evidence suggests the former, through the operation of conditioning processes induced across the normal range of developmental environments, and we summarize current knowledge of the physiological processes involved. The adaptive pathway to later risk accords with current concepts in evolutionary developmental biology, especially those concerning parental effects. Outside the normal range, effects on development can result in nonadaptive processes, and we review their underlying mechanisms and consequences. New concepts concerning the underlying epigenetic and other mechanisms involved in both disruptive and nondisruptive pathways to disease are reviewed, including the evidence for transgenerational passage of risk from both maternal and paternal lines. These concepts have wider implications for understanding the causes and possible prevention of NCDs such as type 2 diabetes and cardiovascular disease, for broader social policy and for the increasing attention paid in public health to the lifecourse approach to NCD prevention. PMID:25287859

Analysis and Test Correlation of Proof of Concept Box for Blended Wing Body-Low Speed Vehicle

NASA Technical Reports Server (NTRS)

Spellman, Regina L.

2003-01-01

The Low Speed Vehicle (LSV) is a 14.2% scale remotely piloted vehicle of the revolutionary Blended Wing Body concept. The design of the LSV includes an all composite airframe. Due to internal manufacturing capability restrictions, room temperature layups were necessary. An extensive materials testing and manufacturing process development effort was underwent to establish a process that would achieve the high modulus/low weight properties required to meet the design requirements. The analysis process involved a loads development effort that incorporated aero loads to determine internal forces that could be applied to a traditional FEM of the vehicle and to conduct detailed component analyses. A new tool, Hypersizer, was added to the design process to address various composite failure modes and to optimize the skin panel thickness of the upper and lower skins for the vehicle. The analysis required an iterative approach as material properties were continually changing. As a part of the material characterization effort, test articles, including a proof of concept wing box and a full-scale wing, were fabricated. The proof of concept box was fabricated based on very preliminary material studies and tested in bending, torsion, and shear. The box was then tested to failure under shear. The proof of concept box was also analyzed using Nastran and Hypersizer. The results of both analyses were scaled to determine the predicted failure load. The test results were compared to both the Nastran and Hypersizer analytical predictions. The actual failure occurred at 899 lbs. The failure was predicted at 1167 lbs based on the Nastran analysis. The Hypersizer analysis predicted a lower failure load of 960 lbs. The Nastran analysis alone was not sufficient to predict the failure load because it does not identify local composite failure modes. This analysis has traditionally been done using closed form solutions. Although Hypersizer is typically used as an optimizer for the design process, the failure prediction was used to help gain acceptance and confidence in this new tool. The correlated models and process were to be used to analyze the full BWB-LSV airframe design. The analysis and correlation with test results of the proof of concept box is presented here, including the comparison of the Nastran and Hypersizer results.

Outlook for Development of High-throughput Cryopreservation for Small-bodied Biomedical Model Fishes★

PubMed Central

Tiersch, Terrence R.; Yang, Huiping; Hu, E.

2011-01-01

With the development of genomic research technologies, comparative genome studies among vertebrate species are becoming commonplace for human biomedical research. Fish offer unlimited versatility for biomedical research. Extensive studies are done using these fish models, yielding tens of thousands of specific strains and lines, and the number is increasing every day. Thus, high-throughput sperm cryopreservation is urgently needed to preserve these genetic resources. Although high-throughput processing has been widely applied for sperm cryopreservation in livestock for decades, application in biomedical model fishes is still in the concept-development stage because of the limited sample volumes and the biological characteristics of fish sperm. High-throughput processing in livestock was developed based on advances made in the laboratory and was scaled up for increased processing speed, capability for mass production, and uniformity and quality assurance. Cryopreserved germplasm combined with high-throughput processing constitutes an independent industry encompassing animal breeding, preservation of genetic diversity, and medical research. Currently, there is no specifically engineered system available for high-throughput of cryopreserved germplasm for aquatic species. This review is to discuss the concepts and needs for high-throughput technology for model fishes, propose approaches for technical development, and overview future directions of this approach. PMID:21440666

Concepts for the development of nanoscale stable precipitation-strengthened steels manufactured by conventional methods

DOE PAGES

Yablinsky, C. A.; Tippey, K. E.; Vaynman, S.; ...

2014-11-11

In this study, the development of oxide dispersion strengthened ferrous alloys has shown that microstructures designed for excellent irradiation resistance and thermal stability ideally contain stable nanoscale precipitates and dislocation sinks. Based upon this understanding, the microstructures of conventionally manufactured ferritic and ferritic-martensitic steels can be designed to include controlled volume fractions of fine, stable precipitates and dislocation sinks via specific alloying and processing paths. The concepts proposed here are categorized as advanced high-Cr ferritic-martensitic (AHCr-FM) and novel tailored precipitate ferritic (TPF) steels, which have the potential to improve the in-reactor performance of conventionally manufactured alloys. AHCr-FM steels have modifiedmore » alloy content relative to current reactor materials (such as alloy NF616/P92) to maximize desirable precipitates and control phase stability. TPF steels are designed to incorporate nickel aluminides, in addition to microalloy carbides, in a ferritic matrix to produce fine precipitate arrays with good thermal stability. Both alloying concepts may also benefit from thermomechanical processing to establish dislocation sinks and modify phase transformation behaviors. Alloying and processing paths toward designed microstructures are discussed for both AHCr-FM and TPF material classes.« less

An overview of emerging technologies in contemporary decision support system development

NASA Astrophysics Data System (ADS)

Nursal, Ahmad Taufik; Omar, Mohd Faizal; Nawi, Mohd Nasrun Mohd

2014-12-01

The rapid development of Web technology has opened a new approach to Decision Support System (DSS) development. For instance, Social Media is one of the Web 2.0 digital platforms that allow the creation and exchanges of user-generate content through an interactive interface, high user control and mass participation. The concept and characteristics of Web 2.0 such as remote, platform-independent, context-rich and easy to use, which is fulfill the concept and purpose of DSS. This paper outlines some of the elementary concepts of Web 2.0 and social media technology which can be potentially integrated within DSS to enhance the decision-making process. Our initial investigation indicates that there is limited study attempt to embed Web 2.0 into DSS. Thus, this paper highlights the importance of Web 2.0 technology in order to foster the betterment of DSS development and its usability.

Two dimensional radial gas flows in atmospheric pressure plasma-enhanced chemical vapor deposition

NASA Astrophysics Data System (ADS)

Kim, Gwihyun; Park, Seran; Shin, Hyunsu; Song, Seungho; Oh, Hoon-Jung; Ko, Dae Hong; Choi, Jung-Il; Baik, Seung Jae

2017-12-01

Atmospheric pressure (AP) operation of plasma-enhanced chemical vapor deposition (PECVD) is one of promising concepts for high quality and low cost processing. Atmospheric plasma discharge requires narrow gap configuration, which causes an inherent feature of AP PECVD. Two dimensional radial gas flows in AP PECVD induces radial variation of mass-transport and that of substrate temperature. The opposite trend of these variations would be the key consideration in the development of uniform deposition process. Another inherent feature of AP PECVD is confined plasma discharge, from which volume power density concept is derived as a key parameter for the control of deposition rate. We investigated deposition rate as a function of volume power density, gas flux, source gas partial pressure, hydrogen partial pressure, plasma source frequency, and substrate temperature; and derived a design guideline of deposition tool and process development in terms of deposition rate and uniformity.

'Beautiful' unconventional synthesis and processing technologies of superconductors and some other materials.

PubMed

Badica, Petre; Crisan, Adrian; Aldica, Gheorghe; Endo, Kazuhiro; Borodianska, Hanna; Togano, Kazumasa; Awaji, Satoshi; Watanabe, Kazuo; Sakka, Yoshio; Vasylkiv, Oleg

2011-02-01

Superconducting materials have contributed significantly to the development of modern materials science and engineering. Specific technological solutions for their synthesis and processing helped in understanding the principles and approaches to the design, fabrication and application of many other materials. In this review, we explore the bidirectional relationship between the general and particular synthesis concepts. The analysis is mostly based on our studies where some unconventional technologies were applied to different superconductors and some other materials. These technologies include spray-frozen freeze-drying, fast pyrolysis, field-assisted sintering (or spark plasma sintering), nanoblasting, processing in high magnetic fields, methods of control of supersaturation and migration during film growth, and mechanical treatments of composite wires. The analysis provides future research directions and some key elements to define the concept of 'beautiful' technology in materials science. It also reconfirms the key position and importance of superconductors in the development of new materials and unconventional synthesis approaches.

Cognition-based development and evaluation of ergonomic user interfaces for medical image processing and archiving systems.

PubMed

Demiris, A M; Meinzer, H P

1997-01-01

Whether or not a computerized system enhances the conditions of work in the application domain, very much demands on the user interface. Graphical user interfaces seem to attract the interest of the users but mostly ignore some basic rules of visual information processing thus leading to systems which are difficult to use, lowering productivity and increasing working stress (cognitive and work load). In this work we present some fundamental ergonomic considerations and their application to the medical image processing and archiving domain. We introduce the extensions to an existing concept needed to control and guide the development of GUIs with respect to domain specific ergonomics. The suggested concept, called Model-View-Controller Constraints (MVCC), can be used to programmatically implement ergonomic constraints, and thus has some advantages over written style guides. We conclude with the presentation of existing norms and methods to evaluate user interfaces.

Development of the Spanish version of the Systematized Nomenclature of Medicine: methodology and main issues.

PubMed Central

Reynoso, G. A.; March, A. D.; Berra, C. M.; Strobietto, R. P.; Barani, M.; Iubatti, M.; Chiaradio, M. P.; Serebrisky, D.; Kahn, A.; Vaccarezza, O. A.; Leguiza, J. L.; Ceitlin, M.; Luna, D. A.; Bernaldo de Quirós, F. G.; Otegui, M. I.; Puga, M. C.; Vallejos, M.

2000-01-01

This presentation features linguistic and terminology management issues related to the development of the Spanish version of the Systematized Nomenclature of Medicine (SNOMED). It aims at describing the aspects of translating and the difficulties encountered in delivering a natural and consistent medical nomenclature. Bunge's three-layered model is referenced to analyze the sequence of symbolic concept representations. It further explains how a communicative translation based on a concept-to-concept approach was used to achieve the highest level of flawlessness and naturalness for the Spanish rendition of SNOMED. Translation procedures and techniques are described and exemplified. Both the computer-aided and human translation methods are portrayed. The scientific and translation team tasks are detailed, with focus on Newmark's four-level principle for the translation process, extended with a fifth further level relevant to the ontology to control the consistency of the typology of concepts. Finally the convenience for a common methodology to develop non-English versions of SNOMED is suggested. PMID:11079973

Comparison of complex and parsimonious model structures by means of a modular hydrological model concept

NASA Astrophysics Data System (ADS)

Holzmann, Hubert; Massmann, Carolina

2015-04-01

A plenty of hydrological model types have been developed during the past decades. Most of them used a fixed design to describe the variable hydrological processes assuming to be representative for the whole range of spatial and temporal scales. This assumption is questionable as it is evident, that the runoff formation process is driven by dominant processes which can vary among different basins. Furthermore the model application and the interpretation of results is limited by data availability to identify the particular sub-processes, since most models were calibrated and validated only with discharge data. Therefore it can be hypothesized, that simpler model designs, focusing only on the dominant processes, can achieve comparable results with the benefit of less parameters. In the current contribution a modular model concept will be introduced, which allows the integration and neglection of hydrological sub-processes depending on the catchment characteristics and data availability. Key elements of the process modules refer to (1) storage effects (interception, soil), (2) transfer processes (routing), (3) threshold processes (percolation, saturation overland flow) and (4) split processes (rainfall excess). Based on hydro-meteorological observations in an experimental catchment in the Slovak region of the Carpathian mountains a comparison of several model realizations with different degrees of complexity will be discussed. A special focus is given on model parameter sensitivity estimated by Markov Chain Monte Carlo approach. Furthermore the identification of dominant processes by means of Sobol's method is introduced. It could be shown that a flexible model design - and even the simple concept - can reach comparable and equivalent performance than the standard model type (HBV-type). The main benefit of the modular concept is the individual adaptation of the model structure with respect to data and process availability and the option for parsimonious model design.

A Spiritual Framework in Incest Survivors Treatment

ERIC Educational Resources Information Center

Beveridge, Kelli; Cheung, Monit

2004-01-01

Through an examination of recent incest treatment development, this article emphasizes the theoretical concept of "integration" within the treatment process for female adult incest survivors. Spirituality as a therapeutic foundation is discussed with examples of therapeutic techniques. A case study illustrates the psycho-spiritual process of…

Biorefineries: A Short Introduction.

PubMed

Wagemann, Kurt; Tippkötter, Nils

2018-04-13

The terms bioeconomy and biorefineries are used for a variety of processes and developments. This short introduction is intended to provide a delimitation and clarification of the terminology as well as a classification of current biorefinery concepts. The basic process diagrams of the most important biorefinery types are shown.

How do Small Groups Promote Behaviour Change? An Integrative Conceptual Review of Explanatory Mechanisms.

PubMed

Borek, Aleksandra J; Abraham, Charles

2018-03-01

Small groups are used to promote health, well-being, and personal change by altering members' perceptions, beliefs, expectations, and behaviour patterns. An extensive cross-disciplinary literature has articulated and tested theories explaining how such groups develop, function, and facilitate change. Yet these theoretical understandings are rarely applied in the development, description, and evaluation of health-promotion, group-based, behaviour-change interventions. Medline database, library catalogues, search engines, specific journals and reference lists were searched for relevant texts. Texts were reviewed for explanatory concepts or theories describing change processes in groups, which were integrated into the developing conceptual structure. This was designed to be a parsimonious conceptual framework that could be applied to design and delivery. Five categories of interacting processes and concepts were identified and defined: (1) group development processes, (2) dynamic group processes, (3) social change processes, (4) personal change processes, and (5) group design and operating parameters. Each of these categories encompasses a variety of theorised mechanisms explaining individual change in small groups. The final conceptual model, together with the design issues and practical recommendations derived from it, provides a practical basis for linking research and theory explaining group functioning to optimal design of group-based, behaviour-change interventions. © 2018 The Authors. Applied Psychology: Health and Well-Being published by John Wiley & Sons Ltd on behalf of International Association of Applied Psychology.

Chronic condition self-management surveillance: what is and what should be measured?

PubMed

Ruiz, Sarah; Brady, Teresa J; Glasgow, Russell E; Birkel, Richard; Spafford, Michelle

2014-06-19

The rapid growth in chronic disease prevalence, in particular the prevalence of multiple chronic conditions, poses a significant and increasing burden on the health of Americans. Maximizing the use of proven self-management (SM) strategies is a core goal of the US Department of Health and Human Services. Yet, there is no systematic way to assess how much SM or self-management support (SMS) is occurring in the United States. The purpose of this project was to identify appropriate concepts or measures to incorporate into national SM and SMS surveillance. A multistep process was used to identify candidate concepts, assess existing measures, and select high-priority concepts for further development. A stakeholder survey, an environmental scan, subject matter expert feedback, and a stakeholder priority-setting exercise were all used to select the high-priority concepts for development. The stakeholder survey gathered feedback on 32 candidate concepts; 9 concepts were endorsed by more than 66% of respondents. The environmental scan indicated few existing measures that adequately reflected the candidate concepts, and those that were identified were generally specific to a defined condition and not gathered on a population basis. On the basis of the priority setting exercises and environmental scan, we selected 1 concept from each of 5 levels of behavioral influence for immediate development as an SM or SMS indicator. The absence of any available measures to assess SM or SMS across the population highlights the need to develop chronic condition SM surveillance that uses national surveys and other data sources to measure national progress in SM and SMS.

Mission operations concepts for Earth Observing System (EOS)

NASA Technical Reports Server (NTRS)

Kelly, Angelita C.; Taylor, Thomas D.; Hawkins, Frederick J.

1991-01-01

Mission operation concepts are described which are being used to evaluate and influence space and ground system designs and architectures with the goal of achieving successful, efficient, and cost-effective Earth Observing System (EOS) operations. Emphasis is given to the general characteristics and concepts developed for the EOS Space Measurement System, which uses a new series of polar-orbiting observatories. Data rates are given for various instruments. Some of the operations concepts which require a total system view are also examined, including command operations, data processing, data accountability, data archival, prelaunch testing and readiness, launch, performance monitoring and assessment, contingency operations, flight software maintenance, and security.

Lev Semenovich Vygotsky (1896-1924): an introduction to the historico-cultural psychology and the development of the higher psychological processes.

PubMed

Derouesné, Christian

2017-09-01

In the 1930's LS Vygotsky developed an original conception of the psychology and the development of the higher psychological processes, which stands up the current theories in Russia and the West. He layed the bases for the study of the higher mental processes and their relationship with the brain functioning, which will be later on developped by AR Luria. After a brief historical notice, this paper will specify the relationships between Vygoski and Marx's and Engels's philosophy, the Soviet power and the works of Freud and Piaget.

Requirements for the structured recording of surgical device data in the digital operating room.

PubMed

Rockstroh, Max; Franke, Stefan; Neumuth, Thomas

2014-01-01

Due to the increasing complexity of the surgical working environment, increasingly technical solutions must be found to help relieve the surgeon. This objective is supported by a structured storage concept for all relevant device data. In this work, we present a concept and prototype development of a storage system to address intraoperative medical data. The requirements of such a system are described, and solutions for data transfer, processing, and storage are presented. In a subsequent study, a prototype based on the presented concept is tested for correct and complete data transmission and storage and for the ability to record a complete neurosurgical intervention with low processing latencies. In the final section, several applications for the presented data recorder are shown. The developed system based on the presented concept is able to store the generated data correctly, completely, and quickly enough even if much more data than expected are sent during a surgical intervention. The Surgical Data Recorder supports automatic recognition of the interventional situation by providing a centralized data storage and access interface to the OR communication bus. In the future, further data acquisition technologies should be integrated. Therefore, additional interfaces must be developed. The data generated by these devices and technologies should also be stored in or referenced by the Surgical Data Recorder to support the analysis of the OR situation.

Management of Instructional Development: A Matter of Principles.

ERIC Educational Resources Information Center

Patterson, Amos C.; Gilger, Rebecca L.

1979-01-01

Examines how instructional development processes can be successfully managed. Principles of management are offered for setting precise goals; acceptance of these goals; and maximizing self-concept through formal rewards that are goal oriented, through performance evaluation, and through change analysis. (RAO)

Advanced technology development for image gathering, coding, and processing

NASA Technical Reports Server (NTRS)

Huck, Friedrich O.

1990-01-01

Three overlapping areas of research activities are presented: (1) Information theory and optimal filtering are extended to visual information acquisition and processing. The goal is to provide a comprehensive methodology for quantitatively assessing the end-to-end performance of image gathering, coding, and processing. (2) Focal-plane processing techniques and technology are developed to combine effectively image gathering with coding. The emphasis is on low-level vision processing akin to the retinal processing in human vision. (3) A breadboard adaptive image-coding system is being assembled. This system will be used to develop and evaluate a number of advanced image-coding technologies and techniques as well as research the concept of adaptive image coding.

ADVANCED SULFUR CONTROL CONCEPTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Apostolos A. Nikolopoulos; Santosh K. Gangwal; William J. McMichael

Conventional sulfur removal in integrated gasification combined cycle (IGCC) power plants involves numerous steps: COS (carbonyl sulfide) hydrolysis, amine scrubbing/regeneration, Claus process, and tail-gas treatment. Advanced sulfur removal in IGCC systems involves typically the use of zinc oxide-based sorbents. The sulfides sorbent is regenerated using dilute air to produce a dilute SO{sub 2} (sulfur dioxide) tail gas. Under previous contracts the highly effective first generation Direct Sulfur Recovery Process (DSRP) for catalytic reduction of this SO{sub 2} tail gas to elemental sulfur was developed. This process is currently undergoing field-testing. In this project, advanced concepts were evaluated to reduce themore » number of unit operations in sulfur removal and recovery. Substantial effort was directed towards developing sorbents that could be directly regenerated to elemental sulfur in an Advanced Hot Gas Process (AHGP). Development of this process has been described in detail in Appendices A-F. RTI began the development of the Single-step Sulfur Recovery Process (SSRP) to eliminate the use of sorbents and multiple reactors in sulfur removal and recovery. This process showed promising preliminary results and thus further process development of AHGP was abandoned in favor of SSRP. The SSRP is a direct Claus process that consists of injecting SO{sub 2} directly into the quenched coal gas from a coal gasifier, and reacting the H{sub 2}S-SO{sub 2} mixture over a selective catalyst to both remove and recover sulfur in a single step. The process is conducted at gasifier pressure and 125 to 160 C. The proposed commercial embodiment of the SSRP involves a liquid phase of molten sulfur with dispersed catalyst in a slurry bubble-column reactor (SBCR).« less

See what we say: using concept mapping to visualize Latino immigrant's strategies for health interventions.

PubMed

Vaughn, Lisa M; Jacquez, Farrah; Marschner, Daniel; McLinden, Daniel

2016-09-01

Researchers need specific tools to engage community members in health intervention development to ensure that efforts are contextually appropriate for immigrant populations. The purpose of the study was to generate and prioritize strategies to address obesity, stress and coping, and healthcare navigation that are contextually appropriate and applicable to the Latino immigrant community in Cincinnati, Ohio, and then use the results to develop specific interventions to improve Latino health in our area. A community-academic research team used concept mapping methodology with over 200 Latino immigrants and Latino-serving providers. A community intervention planning session was held to share the final concept maps and vote on strategies. The concept maps and results from the intervention planning session emphasized a community lay health worker model to connect the Latino immigrant community with resources to address obesity, stress and coping, and healthcare navigation. Concept maps allowed for the visualization of health intervention strategies prioritized by the larger Latino immigrant community. Concept maps revealed the appropriate content for health interventions as well as the process community members preferred for intervention delivery.

Functional Requirements for Onboard Management of Space Shuttle Consumables. Volume 2

NASA Technical Reports Server (NTRS)

Graf, P. J.; Herwig, H. A.; Neel, L. W.

1973-01-01

This report documents the results of the study "Functional Requirements for Onboard Management of Space Shuttle Consumables." The study was conducted for the Mission Planning and Analysis Division of the NASA Lyndon B. Johnson Space Center, Houston, Texas, between 3 July 1972 and 16 November 1973. The overall study program objective was two-fold. The first objective was to define a generalized consumable management concept which is applicable to advanced spacecraft. The second objective was to develop a specific consumables management concept for the Space Shuttle vehicle and to generate the functional requirements for the onboard portion of that concept. Consumables management is the process of controlling or influencing the usage of expendable materials involved in vehicle subsystem operation. The report consists of two volumes. Volume I presents a description of the study activities related to general approaches for developing consumable management, concepts for advanced spacecraft applications, and functional requirements for a Shuttle consumables management concept. Volume II presents a detailed description of the onboard consumables management concept proposed for use on the Space Shuttle.

Advanced composite structural concepts and material technologies for primary aircraft structures

NASA Technical Reports Server (NTRS)

Jackson, Anthony

1991-01-01

Structural weight savings using advanced composites have been demonstrated for many years. Most military aircraft today use these materials extensively and Europe has taken the lead in their use in commercial aircraft primary structures. A major inhibiter to the use of advanced composites in the United States is cost. Material costs are high and will remain high relative to aluminum. The key therefore lies in the significant reduction in fabrication and assembly costs. The largest cost in most structures today is assembly. As part of the NASA Advanced Composite Technology Program, Lockheed Aeronautical Systems Company has a contract to explore and develop advanced structural and manufacturing concepts using advanced composites for transport aircraft. Wing and fuselage concepts and related trade studies are discussed. These concepts are intended to lower cost and weight through the use of innovative material forms, processes, structural configurations and minimization of parts. The approach to the trade studies and the downselect to the primary wing and fuselage concepts is detailed. The expectations for the development of these concepts is reviewed.

[Expectations and patient satisfaction in hospitals: construction and application of an expectation-based experience typology and its use in the management of quality and expectations].

PubMed

Gehrlach, Christoph; Güntert, Bernhard

2015-01-01

Patient satisfaction (PS) surveys are frequently used evaluation methods to show performance from the customer's view. This approach has some fundamental deficits, especially with respect to theory, methodology and usage. Because of the significant theoretical value of the expectation confirmation/disconfirmation concept in the development of PS, an expectation-based experience typology has been developed and tested to check whether this approach could be a theoretical and practical alternative to the survey of PS. Due to the mainly cognitive-rational process of comparison between expectations and expectation fulfilment, it is easier to make changes in this stage of the process than in the subsequent stage of the development of PS that is mainly based on emotional-affective processes. The paper contains a literature review of the common concept of PS and its causal and influencing factors. Based on the theoretical part of this study, an expectation-based experience typology was developed. In the next step, the typology was subjected to exploratory testing, based on two patient surveys. In some parts of the tested typology explorative differences could be found between hospitals. Despite this rather more complex and unusual approach to expectation-based experience typology, this concept offers the chance to change conditions not only retrospectively (based on data), but also in a prospective way in terms of a "management of expectations". Copyright © 2014. Published by Elsevier GmbH.

Application of quality by design concepts in the development of fluidized bed granulation and tableting processes.

PubMed

Djuris, Jelena; Medarevic, Djordje; Krstic, Marko; Djuric, Zorica; Ibric, Svetlana

2013-06-01

This study illustrates the application of experimental design and multivariate data analysis in defining design space for granulation and tableting processes. According to the quality by design concepts, critical quality attributes (CQAs) of granules and tablets, as well as critical parameters of granulation and tableting processes, were identified and evaluated. Acetaminophen was used as the model drug, and one of the study aims was to investigate the possibility of the development of immediate- or extended-release acetaminophen tablets. Granulation experiments were performed in the fluid bed processor using polyethylene oxide polymer as a binder in the direct granulation method. Tablets were compressed in the laboratory excenter tablet press. The first set of experiments was organized according to Plackett-Burman design, followed by the full factorial experimental design. Principal component analysis and partial least squares regression were applied as the multivariate analysis techniques. By using these different methods, CQAs and process parameters were identified and quantified. Furthermore, an in-line method was developed to monitor the temperature during the fluidized bed granulation process, to foresee possible defects in granules CQAs. Various control strategies that are based on the process understanding and assure desired quality attributes of the product are proposed. Copyright © 2013 Wiley Periodicals, Inc.

The SMART-NAS Testbed

NASA Technical Reports Server (NTRS)

Aquilina, Rudolph A.

2015-01-01

The SMART-NAS Testbed for Safe Trajectory Based Operations Project will deliver an evaluation capability, critical to the ATM community, allowing full NextGen and beyond-NextGen concepts to be assessed and developed. To meet this objective a strong focus will be placed on concept integration and validation to enable a gate-to-gate trajectory-based system capability that satisfies a full vision for NextGen. The SMART-NAS for Safe TBO Project consists of six sub-projects. Three of the sub-projects are focused on exploring and developing technologies, concepts and models for evolving and transforming air traffic management operations in the ATM+2 time horizon, while the remaining three sub-projects are focused on developing the tools and capabilities needed for testing these advanced concepts. Function Allocation, Networked Air Traffic Management and Trajectory Based Operations are developing concepts and models. SMART-NAS Test-bed, System Assurance Technologies and Real-time Safety Modeling are developing the tools and capabilities to test these concepts. Simulation and modeling capabilities will include the ability to assess multiple operational scenarios of the national airspace system, accept data feeds, allowing shadowing of actual operations in either real-time, fast-time and/or hybrid modes of operations in distributed environments, and enable integrated examinations of concepts, algorithms, technologies, and NAS architectures. An important focus within this project is to enable the development of a real-time, system-wide safety assurance system. The basis of such a system is a continuum of information acquisition, analysis, and assessment that enables awareness and corrective action to detect and mitigate potential threats to continuous system-wide safety at all levels. This process, which currently can only be done post operations, will be driven towards "real-time" assessments in the 2035 time frame.

Convergent Time-Varying Regression Models for Data Streams: Tracking Concept Drift by the Recursive Parzen-Based Generalized Regression Neural Networks.

PubMed

Duda, Piotr; Jaworski, Maciej; Rutkowski, Leszek

2018-03-01

One of the greatest challenges in data mining is related to processing and analysis of massive data streams. Contrary to traditional static data mining problems, data streams require that each element is processed only once, the amount of allocated memory is constant and the models incorporate changes of investigated streams. A vast majority of available methods have been developed for data stream classification and only a few of them attempted to solve regression problems, using various heuristic approaches. In this paper, we develop mathematically justified regression models working in a time-varying environment. More specifically, we study incremental versions of generalized regression neural networks, called IGRNNs, and we prove their tracking properties - weak (in probability) and strong (with probability one) convergence assuming various concept drift scenarios. First, we present the IGRNNs, based on the Parzen kernels, for modeling stationary systems under nonstationary noise. Next, we extend our approach to modeling time-varying systems under nonstationary noise. We present several types of concept drifts to be handled by our approach in such a way that weak and strong convergence holds under certain conditions. Finally, in the series of simulations, we compare our method with commonly used heuristic approaches, based on forgetting mechanism or sliding windows, to deal with concept drift. Finally, we apply our concept in a real life scenario solving the problem of currency exchange rates prediction.

Modeling and simulation of the fluid flow in wire electrochemical machining with rotating tool (wire ECM)

NASA Astrophysics Data System (ADS)

Klocke, F.; Herrig, T.; Zeis, M.; Klink, A.

2017-10-01

Combining the working principle of electrochemical machining (ECM) with a universal rotating tool, like a wire, could manage lots of challenges of the classical ECM sinking process. Such a wire-ECM process could be able to machine flexible and efficient 2.5-dimensional geometries like fir tree slots in turbine discs. Nowadays, established manufacturing technologies for slotting turbine discs are broaching and wire electrical discharge machining (wire EDM). Nevertheless, high requirements on surface integrity of turbine parts need cost intensive process development and - in case of wire-EDM - trim cuts to reduce the heat affected rim zone. Due to the process specific advantages, ECM is an attractive alternative manufacturing technology and is getting more and more relevant for sinking applications within the last few years. But ECM is also opposed with high costs for process development and complex electrolyte flow devices. In the past, few studies dealt with the development of a wire ECM process to meet these challenges. However, previous concepts of wire ECM were only suitable for micro machining applications. Due to insufficient flushing concepts the application of the process for machining macro geometries failed. Therefore, this paper presents the modeling and simulation of a new flushing approach for process assessment. The suitability of a rotating structured wire electrode in combination with an axial flushing for electrodes with high aspect ratios is investigated and discussed.

The Career Development Process for Women: Current Views and Programs

ERIC Educational Resources Information Center

Hansen, L. Sunny

1975-01-01

The article discusses (1) female career patterns, (2) female self-concepts and aspirations, and (3) women in the work force. Also discussed are occupational distribution and obstacles to the career development of women. Presented at the Annual Conference on Career Development and Vocational Education, Blacksburg, Virginia, March, 1974. (BW)

The Development of Young Children's Understanding of the Process of Evaporation.

ERIC Educational Resources Information Center

Beveridge, Michael

1985-01-01

This investigation of the development of young children's concept of evaporation examines their intuitive explanations of real world events involving evaporation. A study of the effects of providing evidence contradicting their explanations and of directing their attention to relevant situational features provides insight into the development of…

Individual Differences in Boys' and Girls' Timing and Tempo of Puberty: Modeling Development with Nonlinear Growth Models

ERIC Educational Resources Information Center

Marceau, Kristine; Ram, Nilam; Houts, Renate M.; Grimm, Kevin J.; Susman, Elizabeth J.

2011-01-01

Pubertal development is a nonlinear process progressing from prepubescent beginnings through biological, physical, and psychological changes to full sexual maturity. To tether theoretical concepts of puberty with sophisticated longitudinal, analytical models capable of articulating pubertal development more accurately, we used nonlinear…

Medical device development.

PubMed

Panescu, Dorin

2009-01-01

The development of a successful medical product requires not only engineering design efforts, but also clinical, regulatory, marketing and business expertise. This paper reviews items related to the process of designing medical devices. It discusses the steps required to take a medical product idea from concept, through development, verification and validation, regulatory approvals and market release.

Managing Risk in Systems Development.

ERIC Educational Resources Information Center

DePaoli, Marilyn M.; And Others

Stanford University's use of a risk assessment methodology to improve the management of systems development projects is discussed. After examining the concepts of hazard, peril, and risk as they relate to the system development process, three ways to assess risk are covered: size, structure, and technology. The overall objective for Stanford…

Reading Enrichment Art Development.

ERIC Educational Resources Information Center

Sholler, Ruth; And Others

1983-01-01

A unit on Afro-American art was developed as part of the Reading Enrichment Art Development program. Elementary students from the program were concentrating on the concept of pattern in language. The unit was designed to reinforce this understanding via the reverse-fold pleating process used in a Nigerian tie-dye project. (AM)

EFL Professional Development: Discussion of Effective Models in Literature

ERIC Educational Resources Information Center

Almuhammadi, Anas

2017-01-01

This paper explores the professional development literature in the educational setting. The different literature pieces are aligned to a framework that requires effective professional development to focus on three concepts: content, context, and process. The content focuses on the "what" question in the programs while the context aims to…

Point-to-Point! Validation of the Small Aircraft Transportation System Higher Volume Operations Concept

NASA Technical Reports Server (NTRS)

Williams, Daniel M.

2006-01-01

Described is the research process that NASA researchers used to validate the Small Aircraft Transportation System (SATS) Higher Volume Operations (HVO) concept. The four phase building-block validation and verification process included multiple elements ranging from formal analysis of HVO procedures to flight test, to full-system architecture prototype that was successfully shown to the public at the June 2005 SATS Technical Demonstration in Danville, VA. Presented are significant results of each of the four research phases that extend early results presented at ICAS 2004. HVO study results have been incorporated into the development of the Next Generation Air Transportation System (NGATS) vision and offer a validated concept to provide a significant portion of the 3X capacity improvement sought after in the United States National Airspace System (NAS).

Learning basic programming using CLIS through gamification

NASA Astrophysics Data System (ADS)

Prabawa, H. W.; Sutarno, H.; Kusnendar, J.; Rahmah, F.

2018-05-01

The difficulty of understanding programming concept is a major problem in basic programming lessons. Based on the results of preliminary studies, 60% of students reveal the monotonous of learning process caused by the limited number of media. Children Learning in Science (CLIS) method was chosen as solution because CLIS has facilitated students’ initial knowledge to be optimized into conceptual knowledge. Technological involvement in CLIS (gamification) helped students to understand basic programming concept. This research developed a media using CLIS method with gamification elements to increase the excitement of learning process. This research declared that multimedia is considered good by students, especially regarding the mechanical aspects of multimedia, multimedia elements and aspects of multimedia information structure. Multimedia gamification learning with the CLIS model showed increased number of students’ concept understanding.

Training tomorrow's clinicians today--managed care essentials: a process for curriculum development.

PubMed

Colenda, C C; Wadland, W; Hayes, O; Anderson, W; Priester, F; Pearson, R; Keefe, C; Fleck, L

2000-05-01

To develop a managed care curriculum for primary care residents. This article outlines a 4-stage curriculum development process focusing on concepts of managed care organization and finance. The stages consist of: (1) identifying the curriculum development work group and framing the scope of the curriculum, (2) identifying stakeholder buy-in and expectations, (3) choosing curricular topics and delivery mechanisms, and (4) outlining the evaluation process. Key elements of building a curriculum development team, content objectives of the curriculum, the rationale for using problem-based learning, and finally, lessons learned from the partnership among the stakeholders are reviewed. The curriculum was delivered to an entering group of postgraduate-year 1 primary care residents. Attitudes among residents toward managed care remained relatively negative and stable over the yearlong curriculum, especially over issues relating to finance, quality of care, control and autonomy of practitioners, time spent with patients, and managed care's impact on the doctor-patient relationship. Residents' baseline knowledge of core concepts about managed care organization and finance improved during the year that the curriculum was delivered. Satisfaction with a problem-based learning approach was high. Problem-based learning, using real-life clinical examples, is a successful approach to resident instruction about managed care.

Development of the Neuron Assessment for Measuring Biology Students' Use of Experimental Design Concepts and Representations.

PubMed

Dasgupta, Annwesa P; Anderson, Trevor R; Pelaez, Nancy J

2016-01-01

Researchers, instructors, and funding bodies in biology education are unanimous about the importance of developing students' competence in experimental design. Despite this, only limited measures are available for assessing such competence development, especially in the areas of molecular and cellular biology. Also, existing assessments do not measure how well students use standard symbolism to visualize biological experiments. We propose an assessment-design process that 1) provides background knowledge and questions for developers of new "experimentation assessments," 2) elicits practices of representing experiments with conventional symbol systems, 3) determines how well the assessment reveals expert knowledge, and 4) determines how well the instrument exposes student knowledge and difficulties. To illustrate this process, we developed the Neuron Assessment and coded responses from a scientist and four undergraduate students using the Rubric for Experimental Design and the Concept-Reasoning Mode of representation (CRM) model. Some students demonstrated sound knowledge of concepts and representations. Other students demonstrated difficulty with depicting treatment and control group data or variability in experimental outcomes. Our process, which incorporates an authentic research situation that discriminates levels of visualization and experimentation abilities, shows potential for informing assessment design in other disciplines. © 2016 A. P. Dasgupta et al. CBE—Life Sciences Education © 2016 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Beating the numbers through strategic intervention materials (SIMs): Innovative science teaching for large classes

NASA Astrophysics Data System (ADS)

Alboruto, Venus M.

2017-05-01

The study aimed to find out the effectiveness of using Strategic Intervention Materials (SIMs) as an innovative teaching practice in managing large Grade Eight Science classes to raise the performance of the students in terms of science process skills development and mastery of science concepts. Utilizing experimental research design with two groups of participants, which were purposefully chosen, it was obtained that there existed a significant difference in the performance of the experimental and control groups based on actual class observation and written tests on science process skills with a p-value of 0.0360 in favor of the experimental class. Further, results of written pre-test and post-test on science concepts showed that the experimental group with the mean of 24.325 (SD =3.82) performed better than the control group with the mean of 20.58 (SD =4.94), with a registered p-value of 0.00039. Therefore, the use of SIMs significantly contributed to the mastery of science concepts and the development of science process skills. Based on the findings, the following recommendations are offered: 1. that grade eight science teachers should use or adopt the SIMs used in this study to improve their students' performance; 2. training-workshop on developing SIMs must be conducted to help teachers develop SIMs to be used in their classes; 3. school administrators must allocate funds for the development and reproduction of SIMs to be used by the students in their school; and 4. every division should have a repository of SIMs for easy access of the teachers in the entire division.

Audio reproduction for personal ambient home assistance: concepts and evaluations for normal-hearing and hearing-impaired persons.

PubMed

Huber, Rainer; Meis, Markus; Klink, Karin; Bartsch, Christian; Bitzer, Joerg

2014-01-01

Within the Lower Saxony Research Network Design of Environments for Ageing (GAL), a personal activity and household assistant (PAHA), an ambient reminder system, has been developed. One of its central output modality to interact with the user is sound. The study presented here evaluated three different system technologies for sound reproduction using up to five loudspeakers, including the "phantom source" concept. Moreover, a technology for hearing loss compensation for the mostly older users of the PAHA was implemented and evaluated. Evaluation experiments with 21 normal hearing and hearing impaired test subjects were carried out. The results show that after direct comparison of the sound presentation concepts, the presentation by the single TV speaker was most preferred, whereas the phantom source concept got the highest acceptance ratings as far as the general concept is concerned. The localization accuracy of the phantom source concept was good as long as the exact listening position was known to the algorithm and speech stimuli were used. Most subjects preferred the original signals over the pre-processed, dynamic-compressed signals, although processed speech was often described as being clearer.

Solar Program Assessment: Environmental Factors - Solar Agricultural and Industrial Process Heat.

ERIC Educational Resources Information Center

Energy Research and Development Administration, Washington, DC. Div. of Solar Energy.

The purpose of this report is to present and prioritize the major environmental issues associated with the further development of solar energy as a source of process heat in the industrial and agricultural sectors. To provide a background for this environmental analysis, the basic concepts and technologies of solar process heating are reviewed.…

Application of advanced on-board processing concepts to future satellite communications systems

NASA Technical Reports Server (NTRS)

Katz, J. L.; Hoffman, M.; Kota, S. L.; Ruddy, J. M.; White, B. F.

1979-01-01

An initial definition of on-board processing requirements for an advanced satellite communications system to service domestic markets in the 1990's is presented. An exemplar system architecture with both RF on-board switching and demodulation/remodulation baseband processing was used to identify important issues related to system implementation, cost, and technology development.

Analysis of the most common concept inventories in physics: What are we assessing?

NASA Astrophysics Data System (ADS)

Laverty, James T.; Caballero, Marcos D.

2018-06-01

Assessing student learning is a cornerstone of educational practice. Standardized assessments have played a significant role in the development of instruction, curricula, and educational spaces in college physics. However, the use of these assessments to evaluate student learning is only productive if they continue to align with our learning goals. Recently, there have been calls to elevate the process of science ("scientific practices") to the same level of importance and emphasis as the concepts of physics ("core ideas" and "crosscutting concepts"). We use the recently developed Three-Dimensional Learning Assessment Protocol to investigate how well the most commonly used standardized assessments in introductory physics (i.e., concept inventories) align with this modern understanding of physics education's learning goals. We find that many of the questions on concept inventories do elicit evidence of student understanding of core ideas, but do not have the potential to elicit evidence of scientific practices or crosscutting concepts. Furthermore, we find that the individual scientific practices and crosscutting concepts that are assessed using these tools are limited to a select few. We discuss the implications that these findings have on designing and testing curricula and instruction both in the past and for the future.

An evolutionary concept analysis of futility in health care.

PubMed

Morata, Lauren

2018-06-01

To report a concept analysis of futility in health care. Each member of the healthcare team: the physician, the nurse, the patient, the family and all others involved perceive futility differently. The current evidence and knowledge in regard to futility in health care manifest a plethora of definitions, meanings and interpretations without consensus. Concept analysis. Databases searched included Medline, Cumulative Index of Nursing and Allied Health Literature, Academic Search Premier, Cochrane Database of Systematic Reviews and PsycINFO. Search terms included "futil*," "concept analysis," "concept," "inefficacious," "non-beneficial," "ineffective" and "fruitless" from 1935-2016 to ensure a historical perspective of the concept. A total of 106 articles were retained to develop the concept. Rogers' evolutionary concept analysis was used to evaluate the concept of futility from ancient medicine to the present. Seven antecedents (the patient/family autonomy, surrogate decision-making movement, the patient-family/physician relationship, physician authority, legislation and court rulings, catastrophic events and advancing medical technology) lead to four major attributes (quantitative, physiologic, qualitative, and disease-specific). Ultimately, futile care could lead to consequences such as litigation, advancing technology, increasing healthcare costs, rationing, moral distress and ethical dilemmas. Futility in health care demonstrates components of a cyclical process and a consensus definition is proposed. A framework is developed to clarify the concept and articulate relationships among attributes, antecedents and consequences. Further testing of the proposed definition and framework are needed. © 2018 John Wiley & Sons Ltd.

A concept analysis of professional commitment in nursing.

PubMed

García-Moyano, Loreto; Altisent, Rogelio; Pellicer-García, Begoña; Guerrero-Portillo, Sandra; Arrazola-Alberdi, Oihana; Delgado-Marroquín, María Teresa

2017-01-01

The concept of professional commitment is being widely studied at present. However, although it is considered an indicator for the most human part of nursing care, there is no clear definition for it, and different descriptors are being used indiscriminately to reference it. The aim of this study is to clarify the concept of professional commitment in nursing through the Rodgers' evolutionary concept analysis process. Systematic search using English and Spanish descriptors and concept analysis. Studies published between 2009 and June 2015, front-to-back analysis of the Nursing Ethics journal and manual check of articles cited in studies related to the Nijmegen Professionalism Scale. The procedure of concept analysis developed by Rodgers was used. Ethical considerations: Although the topic was not labeled as sensitive and subject to ethical approval, its realization was approved by the Ethical Committee of Clinical Research of Aragon (CEICA) approved the study on 18 March 2015 and also careful procedures have been followed according to ethics expressed in the Declaration of Helsinki. A total of 17 published studies. A clear definition of the concept was made, and surrogate terms, concept dimension, differential factors related to the concept, sociocultural variations and consequences for nursing practice were identified. There is a need for continuous advancement in the development of the concept, specific actions to encourage this and the improvement of evaluation methods for its study.

Improving HIV outcomes in resource-limited countries: the importance of quality indicators.

PubMed

Ahonkhai, Aima A; Bassett, Ingrid V; Ferris, Timothy G; Freedberg, Kenneth A

2012-11-24

Resource-limited countries increasingly depend on quality indicators to improve outcomes within HIV treatment programs, but indicators of program performance suitable for use at the local program level remain underdeveloped. Using the existing literature as a guide, we applied standard quality improvement (QI) concepts to the continuum of HIV care from HIV diagnosis, to enrollment and retention in care, and highlighted critical service delivery process steps to identify opportunities for performance indicator development. We then identified existing indicators to measure program performance, citing examples used by pivotal donor agencies, and assessed their feasibility for use in surveying local program performance. Clinical delivery steps without existing performance measures were identified as opportunities for measure development. Using National Quality Forum (NQF) criteria as a guide, we developed measurement concepts suitable for use at the local program level that address existing gaps in program performance assessment. This analysis of the HIV continuum of care identified seven critical process steps providing numerous opportunities for performance measurement. Analysis of care delivery process steps and the application of NQF criteria identified 24 new measure concepts that are potentially useful for improving operational performance in HIV care at the local level. An evidence-based set of program-level quality indicators is critical for the improvement of HIV care in resource-limited settings. These performance indicators should be utilized as treatment programs continue to grow.

Binary processing and display concepts for low-cost Omega receivers. [airborne systems simulation

NASA Technical Reports Server (NTRS)

Lilley, R. W.

1974-01-01

A description is given of concepts related to plans for developing a low-cost, all-digital Omega receiver capable of offering to the small-aircraft pilot a reliable and accurate navigation aid. The receiver base considered includes a receiver front-end module, a receiver control module, a memory-aided phase-locked loop module, a housekeeping timer module, and a synthesizer module.

Dynamics of a Definition: A Framework to Analyse Student Construction of the Concept of Solution to a Differential Equation

ERIC Educational Resources Information Center

Raychaudhuri, Debasree

2008-01-01

In this note we develop a framework that makes explicit the inherent dynamic structure of certain mathematical definitions by means of the four facets of context-entity-process-object. These facets and their interrelations are then used to capture and interpret specific aspects of student constructions of the concept of solution to first order…

A Brief Guide for Teachers Towards the Utilization of the Concept of "Open Space" as an Aspect of Instructional Individualization.

ERIC Educational Resources Information Center

Frase, Larry

This guide examines the elements of the open space concept and offers insight and suggestions as to how to employ this process in the classroom. These elements are outlined as follows: (a) objectives--primarily to develop self-respecting, self-directing, autonomous individuals; (b) knowledge and method--with emphasis on cognitive or thinking…

Efficient Multidisciplinary Analysis Approach for Conceptual Design of Aircraft with Large Shape Change

NASA Technical Reports Server (NTRS)

Chwalowski, Pawel; Samareh, Jamshid A.; Horta, Lucas G.; Piatak, David J.; McGowan, Anna-Maria R.

2009-01-01

The conceptual and preliminary design processes for aircraft with large shape changes are generally difficult and time-consuming, and the processes are often customized for a specific shape change concept to streamline the vehicle design effort. Accordingly, several existing reports show excellent results of assessing a particular shape change concept or perturbations of a concept. The goal of the current effort was to develop a multidisciplinary analysis tool and process that would enable an aircraft designer to assess several very different morphing concepts early in the design phase and yet obtain second-order performance results so that design decisions can be made with better confidence. The approach uses an efficient parametric model formulation that allows automatic model generation for systems undergoing radical shape changes as a function of aerodynamic parameters, geometry parameters, and shape change parameters. In contrast to other more self-contained approaches, the approach utilizes off-the-shelf analysis modules to reduce development time and to make it accessible to many users. Because the analysis is loosely coupled, discipline modules like a multibody code can be easily swapped for other modules with similar capabilities. One of the advantages of this loosely coupled system is the ability to use the medium- to high-fidelity tools early in the design stages when the information can significantly influence and improve overall vehicle design. Data transfer among the analysis modules are based on an accurate and automated general purpose data transfer tool. In general, setup time for the integrated system presented in this paper is 2-4 days for simple shape change concepts and 1-2 weeks for more mechanically complicated concepts. Some of the key elements briefly described in the paper include parametric model development, aerodynamic database generation, multibody analysis, and the required software modules as well as examples for a telescoping wing, a folding wing, and a bat-like wing. The paper also includes the verification of a medium-fidelity aerodynamic tool used for the aerodynamic database generation with a steady and unsteady high-fidelity CFD analysis tool for a folding wing example.

Resource Paper: Molecular Excited State Relaxation Processes.

ERIC Educational Resources Information Center

Rhodes, William

1979-01-01

Develops the concept of oscillatory v dissipative limits as it applies to electronic excited state processes in molecular systems. Main emphasis is placed on the radiative and nonradiative dynamics of the excited state of a molecule prepared by interaction with light or some other excitation source. (BT)

Using Green Chemistry and Engineering Principles to Design, Assess, and Retrofit Chemical Processes for Sustainability

EPA Science Inventory

The concepts of green chemistry and engineering (GC&E) have been promoted as an effective qualitative framework for developing more sustainable chemical syntheses, processes, and material management techniques. This has been demonstrated by many theoretical and practical cases. I...

Mind the gap! Automated concept map feedback supports students in writing cohesive explanations.

PubMed

Lachner, Andreas; Burkhart, Christian; Nückles, Matthias

2017-03-01

Many students are challenged with the demand of writing cohesive explanations. To support students in writing cohesive explanations, we developed a computer-based feedback tool that visualizes cohesion deficits of students' explanations in a concept map. We conducted three studies to investigate the effectiveness of such feedback as well as the underlying cognitive processes. In Study 1, we found that the concept map helped students identify potential cohesion gaps in their drafts and plan remedial revisions. In Study 2, students with concept map feedback conducted revisions that resulted in more locally and globally cohesive, and also more comprehensible, explanations than the explanations of students who revised without concept map feedback. In Study 3, we replicated the findings of Study 2 by and large. More importantly, students who had received concept map feedback on a training explanation 1 week later wrote a transfer explanation without feedback that was more cohesive than the explanation of students who had received no feedback on their training explanation. The automated concept map feedback appears to particularly support the evaluation phase of the revision process. Furthermore, the feedback enabled novice writers to acquire sustainable skills in writing cohesive explanations. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Theoretical aspects of cellular decision-making and information-processing.

PubMed

Kobayashi, Tetsuya J; Kamimura, Atsushi

2012-01-01

Microscopic biological processes have extraordinary complexity and variety at the sub-cellular, intra-cellular, and multi-cellular levels. In dealing with such complex phenomena, conceptual and theoretical frameworks are crucial, which enable us to understand seemingly different intra- and inter-cellular phenomena from unified viewpoints. Decision-making is one such concept that has attracted much attention recently. Since a number of cellular behavior can be regarded as processes to make specific actions in response to external stimuli, decision-making can cover and has been used to explain a broad range of different cellular phenomena [Balázsi et al. (Cell 144(6):910, 2011), Zeng et al. (Cell 141(4):682, 2010)]. Decision-making is also closely related to cellular information-processing because appropriate decisions cannot be made without exploiting the information that the external stimuli contain. Efficiency of information transduction and processing by intra-cellular networks determines the amount of information obtained, which in turn limits the efficiency of subsequent decision-making. Furthermore, information-processing itself can serve as another concept that is crucial for understanding of other biological processes than decision-making. In this work, we review recent theoretical developments on cellular decision-making and information-processing by focusing on the relation between these two concepts.

Intersection of migration and turnover theories-What can we learn?

PubMed

Brewer, Carol S; Kovner, Christine T

2014-01-01

The international migration of nurses has become a major issue in the international health and workforce policy circles, but analyses are not based on a comprehensive theory. The purpose of this article was to compare the concepts of an integrated nursing turnover theory with the concepts of one international migration framework. An integrated turnover theory is compared with a frequently used migration framework using examples of each. Migration concepts relate well to turnover concepts, but the relative importance and strength of various concepts may differ. For example, identification, development, and measurement of the concept of national commitment, if it exists, is parallel to organizational commitment and may be fruitful in understanding the processes that lead to nurse migration. The turnover theory provides a framework for examining migration concepts and considering how these concepts could relate to each other in a future theory of migration. Ultimately, a better understanding of the relationships and strengths of these concepts could lead to more effective policy. Copyright © 2014 Elsevier Inc. All rights reserved.

Mindfulness in nursing: an evolutionary concept analysis.

PubMed

White, Lacie

2014-02-01

To report an analysis of the concept of mindfulness. Mindfulness is an emerging concept in health care that has significant implications for a variety of clinical populations. Nursing uses this concept in limited ways, and subsequently requires conceptual clarity to further identify its significance, use and applications in nursing. Mindfulness was explored using Rodgers evolutionary method of concept analysis. For this analysis, a sample of 59 English theoretical and research-based articles from the Cumulative Index to Nursing and Allied Health Literature database were obtained. The search was conducted between all-inclusive years of the database, 1981-2012. Data were analysed with particular focus on the attributes, antecedents, consequences, references and related terms that arose in relation to mindfulness in the nursing literature. The analysis found five intricately connected attributes: mindfulness is a transformative process where one develops an increasing ability to 'experience being present', with 'acceptance', 'attention' and 'awareness'. Antecedents, attributes and consequences appeared to inform and strengthen one another over time. Mindfulness is a significant concept for the discipline of nursing with practical applications for nurse well-being, the development and sustainability of therapeutic nursing qualities and holistic health promotion. It is imperative that nurse well-being and self-care become a more prominent focus in nursing research and education. Further development of the concept of mindfulness could support this focus, particularly through rigorous qualitative methodologies. © 2013 John Wiley & Sons Ltd.

Automating concept identification in the electronic medical record: an experiment in extracting dosage information.

PubMed Central

Evans, D. A.; Brownlow, N. D.; Hersh, W. R.; Campbell, E. M.

1996-01-01

We discuss the development and evaluation of an automated procedure for extracting drug-dosage information from clinical narratives. The process was developed rapidly using existing technology and resources, including categories of terms from UMLS96. Evaluations over a large training and smaller test set of medical records demonstrate an approximately 80% rate of exact and partial matches' on target phrases, with few false positives and a modest rate of false negatives. The results suggest a strategy for automating general concept identification in electronic medical records. PMID:8947694

A&R challenges for in-space operations. [Automation and Robotic technologies

NASA Technical Reports Server (NTRS)

Underwood, James

1990-01-01

Automation and robotics (A&R) challenges for in-space operations are examined, with emphasis on the interaction between developing requirements, developing solutions, design concepts, and the nature of the applicability of automation in robotic technologies. Attention is first given to the use of A&R in establishing outposts on the moon and Mars. Then emphasis is placed on the requirements for the assembly of transportation systems in low earth orbit. Concepts of the Space Station which show how the assembly, processing, and checkout of systems in LEO might be accommodated are examined.

Advanced beamed-energy and field propulsion concepts

NASA Technical Reports Server (NTRS)

Myrabo, L. N.

1983-01-01

Specific phenomena which might lead to major advances in payload, range and terminal velocity of very advanced vehicle propulsion are studied. The effort focuses heavily on advanced propulsion spinoffs enabled by current government-funded investigations in directed-energy technology: i.e., laser, microwave, and relativistic charged particle beams. Futuristic (post-year 2000) beamed-energy propulsion concepts which indicate exceptional promise are identified and analytically investigated. The concepts must be sufficiently developed to permit technical understanding of the physical processes involved, assessment of the enabling technologies, and evaluation of their merits over conventional systems. Propulsion concepts that can be used for manned and/or unmanned missions for purposes of solar system exploration, planetary landing, suborbital flight, transport to orbit, and escape are presented. Speculations are made on the chronology of milestones in beamed-energy propulsion development, such as in systems applications of defense, satellite orbit-raising, global aerospace transportation, and manned interplanetary carriers.