California State Library: Processing Center Design and Specifications. Volume III, Coding Manual.

ERIC Educational Resources Information Center

Sherman, Don; Shoffner, Ralph M.

As part of the report on the California State Library Processing Center design and specifications, this volume is a coding manual for the conversion of catalog card data to a machine-readable form. The form is compatible with the national MARC system, while at the same time it contains provisions for problems peculiar to the local situation. This…

Designing a health/legal system : a manual

DOT National Transportation Integrated Search

1979-08-01

The report presents a manual for use by state, county, and local organizations in improving their case-disposition process for persons arrested for drunk driving. These processes use the agencies of the traffic law system and the public health system...

Spent nuclear fuel project cold vacuum drying facility operations manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

IRWIN, J.J.

This document provides the Operations Manual for the Cold Vacuum Drying Facility (CVDF). The Manual was developed in conjunction with HNF-SD-SNF-SAR-002, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of Processing Systems (Garvin 1998) and, the HNF-SD-SNF-DRD-002, 1997, Cold Vacuum Drying Facility Design Requirements, Rev. 3a. The Operations Manual contains general descriptions of all the process, safety and facility systems in the CVDF, a general CVD operations sequence, and has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of themore » CVDF until the CVDF final ORR is approved.« less

Process Design Manual: Wastewater Treatment Facilities for Sewered Small Communities.

ERIC Educational Resources Information Center

Leffel, R. E.; And Others

This manual attempts to describe new treatment methods, and discuss the application of new techniques for more effectively removing a broad spectrum of contaminants from wastewater. Topics covered include: fundamental design considerations, flow equalization, headworks components, clarification of raw wastewater, activated sludge, package plants,…

Collaboration between Writers and Graphic Designers in Documentation Projects.

ERIC Educational Resources Information Center

Mirel, Barbara; And Others

1995-01-01

Analyzes collaborations between software manual writers and graphic designers to discover how their processes of collaboration directly affect the form of a finished manual. Identifies three models of collaboration: assembly line (linear drafting), swap meet (iterative drafting and joint problem solving), and symphony (codevelopment in every…

Activated Sludge Process Workshop Manual.

ERIC Educational Resources Information Center

Ontario Ministry of the Environment, Toronto.

This manual was developed for use at workshops designed to upgrade the knowledge of experienced wastewater treatment plant operators. Each of the lessons in this document has clearly stated behavioral objectives to tell the trainee what he should know or do after completing that topic. Areas covered in this manual include: types and factors…

Oxidation Ditches. Student Manual. Biological Treatment Process Control.

ERIC Educational Resources Information Center

Nelsen, David

The textual material for a two-lesson unit on oxidation ditches is presented in this student manual. Topics discussed in the first lesson (introduction, theory, and components) include: history of the oxidation ditch process; various designs of the oxidation ditch; multi-trench systems; carrousel system; advantages and disadvantages of the…

Facultative Lagoons. Student Manual. Biological Treatment Process Control.

ERIC Educational Resources Information Center

Andersen, Lorri

The textual material for a unit on facultative lagoons is presented in this student manual. Topic areas discussed include: (1) loading; (2) microbial theory; (3) structure and design; (4) process control; (5) lagoon start-up; (6) data handling and analysis; (7) lagoon maintenance (considering visual observations, pond structure, safety, odor,…

U.S. EPA (ENVIRONMENTAL PROTECTION AGENCY) WASTEWATER DISINFECTION RESEARCH PROGRAM EVOLUTION TO A DESIGN MANUAL

EPA Science Inventory

The paper presents the history of the EPA wastewater disinfection research program from the early 1970's until it culminated with the publication of the Process Design Manual in September 1986. The program was elevated to the highest Agency research priority in 1976 with the infu...

Math Problems for Water Quality Control Personnel, Instructor's Manual. Second Edition.

ERIC Educational Resources Information Center

Delvecchio, Fred; Brutsch, Gloria

This document is the instructor's manual for a course in mathematics for water quality control personnel. It is designed so a program may be designed for a specific facility. The problem structures are arranged alphabetically by treatment process. Charts, graphs and/or drawings representing familiar data forms contain the necessary information to…

Hanford Waste Vitrification Plant technical manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larson, D.E.; Watrous, R.A.; Kruger, O.L.

1996-03-01

A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. Themore » immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version.« less

Sampling large landscapes with small-scale stratification-User's Manual

USGS Publications Warehouse

Bart, Jonathan

2011-01-01

This manual explains procedures for partitioning a large landscape into plots, assigning the plots to strata, and selecting plots in each stratum to be surveyed. These steps are referred to as the "sampling large landscapes (SLL) process." We assume that users of the manual have a moderate knowledge of ArcGIS and Microsoft ® Excel. The manual is written for a single user but in many cases, some steps will be carried out by a biologist designing the survey and some steps will be carried out by a quantitative assistant. Thus, the manual essentially may be passed back and forth between these users. The SLL process primarily has been used to survey birds, and we refer to birds as subjects of the counts. The process, however, could be used to count any objects. ®

User's Manual for CoEAT Tool

EPA Pesticide Factsheets

The Co-EAT users manual is designed to help the anaerobic digestion system operators evaluate the costs and benefits of accepting and processing wasted food, fats, oils and greases (FOG) or other organic materials.

Manual de Cocina y Nutricion (Handbook on Cooking and Nutrition).

ERIC Educational Resources Information Center

Ruiz, Mercedes M., Ed.; Pavon, Elena S., Ed.

This manual is part of a Mexican series of instructional materials designed for Spanish speaking adults who are in the process of becoming literate or have recently become literate in their native language. Its objective is to strengthen reading and writing skills while teaching basic nutrition and food preparation techniques. The manual provides…

The Budget Process in Parks and Recreation. A Case Study Manual.

ERIC Educational Resources Information Center

Kelsey, Craig; Gray, Howard

This case study manual, designed for undergraduate or graduate students studying the area of parks and recreation fiscal management, considers the practical, critical skills of budgeting techniques. The manual deals with the most common budgeting styles in a step-by-step approach with case study exercises. Each chapter includes an introduction to…

Sanitary Engineering Unit Operations and Unit Processes Laboratory Manual.

ERIC Educational Resources Information Center

American Association of Professors in Sanitary Engineering.

This manual contains a compilation of experiments in Physical Operations, Biological and Chemical Processes for various education and equipment levels. The experiments are designed to be flexible so that they can be adapted to fit the needs of a particular program. The main emphasis is on hands-on student experiences to promote understanding.…

Solar Energy: Materials, Materials Handling, and Fabrication Processes: Student Material. First Edition.

ERIC Educational Resources Information Center

Bolin, William Everet; Orsak, Charles G., Jr.

Designed for student use in "Materials, Materials Handling, and Fabrication Processes," one of 11 courses in a 2-year associate degree program in solar technology, this manual provides readings, exercises, worksheets, bibliographies, and illustrations for 13 course modules. The manual, which corresponds to an instructor guide for the…

Incorporating Manual and Autonomous Code Generation

NASA Technical Reports Server (NTRS)

McComas, David

1998-01-01

Code can be generated manually or using code-generated software tools, but how do you interpret the two? This article looks at a design methodology that combines object-oriented design with autonomic code generation for attitude control flight software. Recent improvements in space flight computers are allowing software engineers to spend more time engineering the applications software. The application developed was the attitude control flight software for an astronomical satellite called the Microwave Anisotropy Probe (MAP). The MAP flight system is being designed, developed, and integrated at NASA's Goddard Space Flight Center. The MAP controls engineers are using Integrated Systems Inc.'s MATRIXx for their controls analysis. In addition to providing a graphical analysis for an environment, MATRIXx includes an autonomic code generation facility called AutoCode. This article examines the forces that shaped the final design and describes three highlights of the design process: (1) Defining the manual to autonomic code interface; (2) Applying object-oriented design to the manual flight code; (3) Implementing the object-oriented design in C.

Preparation of Effective Operating Manuals to Support Waste Management Plant Operator Training

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, S. R.

2003-02-25

Effective plant operating manuals used in a formal training program can make the difference between a successful operation and a failure. Once the plant process design and control strategies have been fixed, equipment has been ordered, and the plant is constructed, the only major variable affecting success is the capability of plant operating personnel. It is essential that the myriad details concerning plant operation are documented in comprehensive operating manuals suitable for training the non-technical personnel that will operate the plant. These manuals must cover the fundamental principles of each unit operation including how each operates, what process variables aremore » important, and the impact of each variable on the overall process. In addition, operators must know the process control strategies, process interlocks, how to respond to alarms, each of the detailed procedures required to start up and optimize the plant, and every control loop-including when it is appropriate to take manual control. More than anything else, operating mistakes during the start-up phase can lead to substantial delays in achieving design processing rates as well as to problems with government authorities if environmental permit limits are exceeded. The only way to assure return on plant investment is to ensure plant operators have the knowledge to properly run the plant from the outset. A comprehensive set of operating manuals specifically targeted toward plant operators and supervisors written by experienced operating personnel is the only effective way to provide the necessary information for formal start-up training.« less

Wind Systems for Pumping Water: A Training Manual. No. T-25.

ERIC Educational Resources Information Center

Eschenbach, Willis

This document was prepared as a training manual for people interested in developing appropriate technological approaches to using wind power to pump water. The training program is divided into two basic formats, one in which a session focuses on the design process and participants are expected to do some design work in groups, and another which…

Manual de Salud Familiar y Primeros Auxilios (Family Health and First Aid Manual).

ERIC Educational Resources Information Center

Torres De Leon, Juana Maria

This textbook is part of a Mexican series of instructional materials designed for Spanish speaking adults who are in the process of becoming literate or have recently become literate in their native language. This textbook is designed to strengthen reading and writing skills while teaching basic principles and techniques to improve family health.…

NEFP Decision Process: "A Computer Simulation for Planning School Finance Programs." User Manual.

ERIC Educational Resources Information Center

Boardman, Gerald R.; And Others

The National Educational Finance Project has developed a computerized model designed to simulate the consequences of alternative decisions in regard to the financing of public elementary and secondary education. This manual describes a users orientation to that model. The model was designed as an operational prototype for States to use in a…

Maryland State Department of Education School Food and Nutrition Service Design Manual.

ERIC Educational Resources Information Center

Maryland State Dept. of Education, Baltimore.

The purpose of this manual is to suggest strategies for identifying components that must be addressed to create and develop a successful food service and nutrition facility. It focuses on the process involved in creating such facilities, and it provides an overview of the planning phase, design and construction, and educational specifications.…

Manuals for Editors and Authors: A Decision Model.

ERIC Educational Resources Information Center

Kirschner, Paul A.

A series of eight manuals dealing with the triad text characteristics--learning processes--learning outcomes are being prepared for use by authors and editors as an aid in the design and writing of educational texts. These manuals are based upon a model for the functioning of text characteristics which in turn is part of a decision model for the…

Typewriting 10-20-30. Senior High School Teacher Resource Manual.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Branch.

This manual is designed to assist typewriting teachers in the implementation of the Alberta, Canada, Typewriting 10-20-30 Curriculum (1985). Many ideas contained in the handbook can also be used in curricula that address keyboarding or the skill of typing in computer keyboarding, dictaphone typing, or word processing. The manual is organized in…

Training Needs Analysis. A Resource for Identifying Training Needs, Selecting Training Strategies, and Developing Training Plans.

ERIC Educational Resources Information Center

Bartram, Sharon; Gibson, Brenda

Designed as a practical tool for trainers, this manual contains 22 instruments and documents for gathering and processing information about training and development issues within an organization. Part one of the two-part manual examines the process of identifying and analyzing training needs. It reviews the different types of information the…

Systematic Program Design: A Handbook for Volunteers. Appropriate Technologies for Development. Fourth Edition. Reprint R-44A.

ERIC Educational Resources Information Center

Peace Corps, Washington, DC. Information Collection and Exchange Div.

This manual is intended to assist volunteers and staff of volunteer organizations in the design of projects in various community and social service areas. The first section of the manual is a guidebook that addresses such aspects of the planning, implementation, and evaluation process as situational analysis, needs assessment, task-oriented…

AHTD cracking protocol application with automated distress survey for design and management.

DOT National Transportation Integrated Search

2011-03-09

Manual surveys of pavement cracking have problems associated with variability, repeatability, processing : speed, and cost. If conducted in the field, safety and related liability of manual survey present challenges : to highway agencies. Therefore a...

High School and Beyond Transcripts Survey (1982). Data File User's Manual. Contractor Report.

ERIC Educational Resources Information Center

Jones, Calvin; And Others

This data file user's manual documents the procedures used to collect and process high school transcripts for a large sample of the younger cohort (1980 sophomores) in the High School and Beyond survey. The manual provides the user with the technical assistance needed to use the computer file and also discusses the following: (1) sample design for…

Towards automatic planning for manufacturing generative processes

DOE Office of Scientific and Technical Information (OSTI.GOV)

CALTON,TERRI L.

2000-05-24

Generative process planning describes methods process engineers use to modify manufacturing/process plans after designs are complete. A completed design may be the result from the introduction of a new product based on an old design, an assembly upgrade, or modified product designs used for a family of similar products. An engineer designs an assembly and then creates plans capturing manufacturing processes, including assembly sequences, component joining methods, part costs, labor costs, etc. When new products originate as a result of an upgrade, component geometry may change, and/or additional components and subassemblies may be added to or are omitted from themore » original design. As a result process engineers are forced to create new plans. This is further complicated by the fact that the process engineer is forced to manually generate these plans for each product upgrade. To generate new assembly plans for product upgrades, engineers must manually re-specify the manufacturing plan selection criteria and re-run the planners. To remedy this problem, special-purpose assembly planning algorithms have been developed to automatically recognize design modifications and automatically apply previously defined manufacturing plan selection criteria and constraints.« less

Kepler Archive Manual

NASA Technical Reports Server (NTRS)

Thompson, Susan E.; Fraquelli, Dorothy; Van Cleve, Jeffrey E.; Caldwell, Douglas A.

2016-01-01

A description of Kepler, its design, performance and operational constraints may be found in the Kepler Instrument Handbook (KIH, Van Cleve Caldwell 2016). A description of Kepler calibration and data processing is described in the Kepler Data Processing Handbook (KDPH, Jenkins et al. 2016; Fanelli et al. 2011). Science users should also consult the special ApJ Letters devoted to early Kepler results and mission design (April 2010, ApJL, Vol. 713 L79-L207). Additional technical details regarding the data processing and data qualities can be found in the Kepler Data Characteristics Handbook (KDCH, Christiansen et al. 2013) and the Data Release Notes (DRN). This archive manual specifically documents the file formats, as they exist for the last data release of Kepler, Data Release 25(KSCI-19065-002). The earlier versions of the archive manual and data release notes act as documentation for the earlier versions of the data files.

Training Manual for Elements of Interface Definition and Control

NASA Technical Reports Server (NTRS)

Lalli, Vincent R. (Editor); Kastner, Robert E. (Editor); Hartt, Henry N. (Editor)

1997-01-01

The primary thrust of this manual is to ensure that the format and information needed to control interfaces between equipment are clear and understandable. The emphasis is on controlling the engineering design of the interface and not on the functional performance requirements of the system or the internal workings of the interfacing equipment. Interface control should take place, with rare exception, at the interfacing elements and no further. There are two essential sections of the manual. Chapter 2, Principles of Interface Control, discusses how interfaces are defined. It describes different types of interfaces to be considered and recommends a format for the documentation necessary for adequate interface control. Chapter 3, The Process: Through the Design Phases, provides tailored guidance for interface definition and control. This manual can be used to improve planned or existing interface control processes during system design and development. It can also be used to refresh and update the corporate knowledge base. The information presented herein will reduce the amount of paper and data required in interface definition and control processes by as much as 50 percent and will shorten the time required to prepare an interface control document. It also highlights the essential technical parameters that ensure that flight subsystems will indeed fit together and function as intended after assembly and checkout.

Le Nouveau Manuel de Formation sur l'Elaboration et la Gestion des Projets. (The New Project Design and Management Workshop Training Manual).

ERIC Educational Resources Information Center

Peace Corps, Washington, DC. Information Collection and Exchange Div.

A french language version of a training manual that presents guidelines for planning and conducting a project design and management (PDM) workshop to teach Peace Corps volunteers to involve local community members in the process of using participatory analysis tools and planning and implementing projects meeting local desires and needs. The first…

Process to evaluate hematological parameters that reflex to manual differential cell counts in a pediatric institution.

PubMed

Guarner, Jeannette; Atuan, Maria Ana; Nix, Barbara; Mishak, Christopher; Vejjajiva, Connie; Curtis, Cheri; Park, Sunita; Mullins, Richard

2010-01-01

Each institution sets specific parameters obtained by automated hematology analyzers to trigger manual counts. We designed a process to decrease the number of manual differential cell counts without impacting patient care. We selected new criteria that prompt manual counts and studied the impact these changes had in 2 days of work and in samples of patients with newly diagnosed leukemia, sickle cell disease, and presence of left shift. By using fewer parameters and expanding our ranges we decreased the number of manual counts by 20%. The parameters that prompted manual counts most frequently were the presence of blast flags and nucleated red blood cells, 2 parameters that were not changed. The parameters that accounted for a decrease in the number of manual counts were the white blood cell count and large unstained cells. Eight of 32 patients with newly diagnosed leukemia did not show blast flags; however, other parameters triggered manual counts. In 47 patients with sickle cell disease, nucleated red cells and red cell variability prompted manual review. Bands were observed in 18% of the specimens and 4% would not have been counted manually with the new criteria, for the latter the mean band count was 2.6%. The process we followed to evaluate hematological parameters that reflex to manual differential cell counts increased efficiency without compromising patient care in our hospital system.

PROCESS DESIGN MANUAL: NITROGEN CONTROL

EPA Science Inventory

This manual is an update and revision of the original 1975 edition. Given the experience of the past 18 years, the focus of this edition is directed to those biological/mechanical systems that have found widespread use for nitrification and nitrogen,removal. The primary audience ...

Context-Adaptive Learning Designs by Using Semantic Web Services

ERIC Educational Resources Information Center

Dietze, Stefan; Gugliotta, Alessio; Domingue, John

2007-01-01

IMS Learning Design (IMS-LD) is a promising technology aimed at supporting learning processes. IMS-LD packages contain the learning process metadata as well as the learning resources. However, the allocation of resources--whether data or services--within the learning design is done manually at design-time on the basis of the subjective appraisals…

National Household Education Surveys Program of 2012: Data File User's Manual. Parent and Family Involvement in Education Survey. Early Childhood Program Participation Survey. NCES 2015-030

ERIC Educational Resources Information Center

McPhee, C.; Bielick, S.; Masterton, M.; Flores, L.; Parmer, R.; Amchin, S.; Stern, S.; McGowan, H.

2015-01-01

The 2012 National Household Education Surveys Program (NHES:2012) Data File User's Manual provides documentation and guidance for users of the NHES:2012 data files. The manual provides information about the purpose of the study, the sample design, data collection procedures, data processing procedures, response rates, imputation, weighting and…

Design of on-line system for measuring and tracking time of assembly

NASA Astrophysics Data System (ADS)

Senderská, Katarína; Mareš, Albert; Evin, Emil

2016-04-01

Manual assembly performed at assembly workstations nowadays still has a unique place in different kinds of production. To increase the productivity and quality of manual assembly it is necessary to analyse the existing workplaces and find ways to improve and streamline work done at these workplaces. The article deals with the design of a model for on-line analysis of a manual assembly process. The proposed model is based on the use of sensors or the so-called button-box and the use of software for recording and evaluating data. Based on the obtained data it is then possible to evaluate the time characteristics of the assembly process, aswell as to find sources of delays and mistakes and then take appropriate action to correct them.

Alaska Special Education Recruitment and Retention Resource Manual.

ERIC Educational Resources Information Center

Schnorr, Janice M.; Brady, Nancy J.

This resource manual is designed to assist Alaska school districts in recruiting and retaining special education teachers. It offers 50 practical suggestions for developing an effective recruitment program, focusing on the processes of gathering information; developing recruiters, materials, and strategies; and screening and interviewing…

Wisconsin Recertification Manual for Public Librarians.

ERIC Educational Resources Information Center

Fox, Robert; And Others

Designed to assist public librarians certified after May 1, 1979, this manual explains Wisconsin recertification requirements based on continuing education. It provides continuing education guidelines, a flow chart of the recertification process, an individual learning activity form, an annual report form, a conversion chart for assignment of…

Development of weight/sizing design synthesis computer program. Volume 3: User Manual

NASA Technical Reports Server (NTRS)

Garrison, J. M.

1973-01-01

The user manual for the weight/sizing design synthesis program is presented. The program is applied to an analysis of the basic weight relationships for the space shuttle which contribute significant portions of the inert weight. The relationships measure the parameters of load, geometry, material, and environment. A verbal description of the processes simulated, data input procedures, output data, and values present in the program is included.

Design of bridge deck drainage : HEC 21

DOT National Transportation Integrated Search

1993-05-01

The manual provides guidelines and procedures for designing bridge deck drainage systems, inclusing illustrative examples. Should the design process indicate a drainage system is needed, utilization of the most hydraulically efficient and maintenance...

Image quality comparisons of X-Omat RP, L and B films.

PubMed

Van Dis, M L; Beck, F M

1991-08-01

The Eastman Kodak Company has recently developed a new film, X-Omat B (XB), designed to be interchangeable with X-Omat RP (XRP) film. The manufacturer claims the new film can be manually developed in half the time of other X-Omat films while automatic processing is unchanged. Three X-Omat film types were processed manually or automatically and the image qualities were evaluated. The XRP film had greater contrast than the XB and X-Omat L (XL) films when manually processed, and the XL film showed less contrast than the XB and XRP films when processed automatically. There was no difference in the subjective evaluation of the various film types and processing methods, and the XB film could be interchanged with XRP film in a simulated clinical situation.

HIGHLIGHTS FROM TECHNICAL MANUAL ON HOOD SYSTEM CAPTURE OF PROCESS FUGITIVE PARTICULATE EMISSIONS

EPA Science Inventory

The paper discusses a technical manual whose emphasis is on the design and evaluation of actual hood systems used to control various fugitive particulate emission sources. Engineering analyses of the most important hood types are presented to provide a conceptual understanding of...

Image Data Processing System (IDAPS) user manual, S-056 experiment. Volume 1: System description. Volume 2: Batch IDAPS. Volume 3: Interactive IDAPS

NASA Technical Reports Server (NTRS)

1975-01-01

Image data processing system (IDAPS) developed to satisfy the image processing requirements of the Skylab S-056 experiment is described. The S-056 experiment was designed to obtain high-resolution photographs of the sun in the far ultraviolet, or soft X-ray, portion of the electromagnetic spectrum. Thirty-five thousand photographs were obtained by the three flights of the program; and, faced with such a massive volume of imagery, the designers of the experiment decided to develop a computer-based system which would reduce the image processing workload. The purpose of the IDAPS User Manual is to give the IDAPS user the necessary information and instructions to effectively utilize the system.

APTI Course 427, Combustion Evaluation. Student Manual.

ERIC Educational Resources Information Center

Beard, J. Taylor; And Others

This student manual supplements a course designed to present fundamental and applied aspects of combustion technology which influence air pollutant emissions. Emphasis is placed on process control of combustion rather than on gas cleaning. The course is intended to provide engineers, regulatory and technical personnel, and others with familiarity…

Assessing the Agreement Between Eo-Based Semi-Automated Landslide Maps with Fuzzy Manual Landslide Delineation

NASA Astrophysics Data System (ADS)

Albrecht, F.; Hölbling, D.; Friedl, B.

2017-09-01

Landslide mapping benefits from the ever increasing availability of Earth Observation (EO) data resulting from programmes like the Copernicus Sentinel missions and improved infrastructure for data access. However, there arises the need for improved automated landslide information extraction processes from EO data while the dominant method is still manual delineation. Object-based image analysis (OBIA) provides the means for the fast and efficient extraction of landslide information. To prove its quality, automated results are often compared to manually delineated landslide maps. Although there is awareness of the uncertainties inherent in manual delineations, there is a lack of understanding how they affect the levels of agreement in a direct comparison of OBIA-derived landslide maps and manually derived landslide maps. In order to provide an improved reference, we present a fuzzy approach for the manual delineation of landslides on optical satellite images, thereby making the inherent uncertainties of the delineation explicit. The fuzzy manual delineation and the OBIA classification are compared by accuracy metrics accepted in the remote sensing community. We have tested this approach for high resolution (HR) satellite images of three large landslides in Austria and Italy. We were able to show that the deviation of the OBIA result from the manual delineation can mainly be attributed to the uncertainty inherent in the manual delineation process, a relevant issue for the design of validation processes for OBIA-derived landslide maps.

Supporting BPMN choreography with system integration artefacts for enterprise process collaboration

NASA Astrophysics Data System (ADS)

Nie, Hongchao; Lu, Xudong; Duan, Huilong

2014-07-01

Business Process Model and Notation (BPMN) choreography modelling depicts externally visible message exchanges between collaborating processes of enterprise information systems. Implementation of choreography relies on designing system integration solutions to realise message exchanges between independently developed systems. Enterprise integration patterns (EIPs) are widely accepted artefacts to design integration solutions. If the choreography model represents coordination requirements between processes with behaviour mismatches, the integration designer needs to analyse the routing requirements and address these requirements by manually designing EIP message routers. As collaboration scales and complexity increases, manual design becomes inefficient. Thus, the research problem of this paper is to explore a method to automatically identify routing requirements from BPMN choreography model and to accordingly design routing in the integration solution. To achieve this goal, recurring behaviour mismatch scenarios are analysed as patterns, and corresponding solutions are proposed as EIP routers. Using this method, a choreography model can be analysed by computer to identify occurrences of mismatch patterns, leading to corresponding router selection. A case study demonstrates that the proposed method enables computer-assisted integration design to implement choreography. A further experiment reveals that the method is effective to improve the design quality and reduce time cost.

Developing Community-Based Learning Centers for Older Adults. A Technical Assistance Manual.

ERIC Educational Resources Information Center

Sprouse, Betsy M.; Brown, Karen

Designed for community groups and organizations, groups of older adults, senior clubs, and agencies, this manual documents the process of developing community education programs for older adults. The first section introduces the concept of a community learning center, while the second section considers whether a learning center should be…

Linking Project Procedure Manual for Using Dumb-Barcode Linking on GEAC.

ERIC Educational Resources Information Center

Condron, Lyn

This procedure manual is designed to assist cataloging staff members at a university library through the 10-step process of barcoding and linking books classified by the Library of Congress system to the library's GEAC online computer system. A brief introduction provides background information on the project. The procedures involved in each…

Teaching Reading to the Disadvantaged Adult.

ERIC Educational Resources Information Center

Dinnan, James A.; Ulmer, Curtis, Ed.

This manual is designed to assess the background of the individual and to bring him to the stage of unlocking the symbolic codes called Reading and Mathematics. The manual begins with Introduction to a Symbolic Code (The Thinking Process and The Key to Learning Basis), and continues with Basic Reading Skills (Readiness, Visual Discrimination,…

The Elementary Science Safety Manual. Revised.

ERIC Educational Resources Information Center

New Jersey State Dept. of Education, Trenton. Div. of General Academic Education.

Based on the principle that safety education should be a vital component in science instruction, this manual was designed to assist elementary teachers in doing more experiments and activities more confidently by making them aware of dangers and precautions. It also aims to make students aware that safety is a lifetime process and responsibility.…

Designing Better Camels: Developing Effective Documentation for Computer Software.

ERIC Educational Resources Information Center

Zacher, Candace M.

This guide to the development of effective documentation for users of computer software begins by identifying five types of documentation, i.e., training manuals, user guides, tutorials, on-screen help comments, and troubleshooting manuals. Six steps in the development process are then outlined and briefly described: (1) planning and preparation;…

Bereavement and Loss Manual: For Administrators and Teachers.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Education Response Centre.

This manual is designed as a resource for elementary and secondary school administrators, counselors, and teachers to help develop a crisis management plan for use in the event of death of a staff member or student through illness, accident, or by suicide. The first section discusses the grieving process. Characteristics associated with grieving…

Group Action Planning: An Innovative Manual for Building a Self-Determined Future.

ERIC Educational Resources Information Center

Anderson, Emma Longan; And Others

This manual is designed to provide adolescents and young adults who have disabilities with a blueprint for setting and achieving goals, making decisions, acquiring needed supports, and achieving a self-determined and sustainable lifestyle. A planning process called Group Action Planning is used as a foundation for self-determination, with…

The microcomputer scientific software series 6: ECOPHYS user's manual.

Treesearch

George E. Host; H. Michael Rauscher; J. G. Isebrands; Donald I. Dickmann; Richard E. Dickson; Thomas R. Crow; D.A. Michael

1990-01-01

ECOPHYS is an ecophysiological whole-tree growth process model designed to simulate the growth of poplar in the establishment year. This microcomputer-based model may be used to test the influence of genetically determined physiological or morphological attributes on plant growth. This manual describes the installation, file structures, and operational procedures for...

Making the IEP Process Work for Students with Brain Injuries.

ERIC Educational Resources Information Center

Todis, Bonnie; Sohlberg, McKay Moore; Glang, Ann

This manual is designed to be used for any kind of student-centered planning for secondary students with brain injuries, including the Individualized Education Program (IEP) required for every student who is found eligible for special education. The manual provides questionnaires, observation forms, and procedures to help the education team gather…

Pathways to Success; A Resource Manual for the Dissemination of Successful Educational Programs.

ERIC Educational Resources Information Center

Soper, Dorothy

This manual is designed to describe and disseminate information about innovative New Jersey educational programs that have been validated by the standards and guidelines of the United States Office of Education as successful, cost effective, and exportable. Chapter 1 contains an overview of the development process for educational programs and…

Manual for Public School Facilities: Fire Prevention and Fire Inspection.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Educational Management Services.

This manual is designed for use by New York public school administrators and facility inspectors, providing instruction for completing the state's Fire Safety Report. It provides background information and details about the State Fire Prevention and Building Code and regulations, and explains the inspection and enforcement processes. One-third of…

User Manuals for a Primary Care Electronic Medical Record System: A Mixed Methods Study of User- and Vendor-Generated Documents.

PubMed

Shachak, Aviv; Dow, Rustam; Barnsley, Jan; Tu, Karen; Domb, Sharon; Jadad, Alejandro R; Lemieux-Charles, Louise

2013-06-04

Tutorials and user manuals are important forms of impersonal support for using software applications including electronic medical records (EMRs). Differences between user- and vendor documentation may indicate support needs, which are not sufficiently addressed by the official documentation, and reveal new elements that may inform the design of tutorials and user manuals. What are the differences between user-generated tutorials and manuals for an EMR and the official user manual from the software vendor? Effective design of tutorials and user manuals requires careful packaging of information, balance between declarative and procedural texts, an action and task-oriented approach, support for error recognition and recovery, and effective use of visual elements. No previous research compared these elements between formal and informal documents. We conducted an mixed methods study. Seven tutorials and two manuals for an EMR were collected from three family health teams and compared with the official user manual from the software vendor. Documents were qualitatively analyzed using a framework analysis approach in relation to the principles of technical documentation described above. Subsets of the data were quantitatively analyzed using cross-tabulation to compare the types of error information and visual cues in screen captures between user- and vendor-generated manuals. The user-developed tutorials and manuals differed from the vendor-developed manual in that they contained mostly procedural and not declarative information; were customized to the specific workflow, user roles, and patient characteristics; contained more error information related to work processes than to software usage; and used explicit visual cues on screen captures to help users identify window elements. These findings imply that to support EMR implementation, tutorials and manuals need to be customized and adapted to specific organizational contexts and workflows. The main limitation of the study is its generalizability. Future research should address this limitation and may explore alternative approaches to software documentation, such as modular manuals or participatory design.

Development of automation software for neutron activation analysis process in Malaysian nuclear agency

NASA Astrophysics Data System (ADS)

Yussup, N.; Rahman, N. A. A.; Ibrahim, M. M.; Mokhtar, M.; Salim, N. A. A.; Soh@Shaari, S. C.; Azman, A.

2017-01-01

Neutron Activation Analysis (NAA) process has been established in Malaysian Nuclear Agency (Nuclear Malaysia) since 1980s. Most of the procedures established especially from sample registration to sample analysis are performed manually. These manual procedures carried out by the NAA laboratory personnel are time consuming and inefficient. Hence, a software to support the system automation is developed to provide an effective method to replace redundant manual data entries and produce faster sample analysis and calculation process. This paper describes the design and development of automation software for NAA process which consists of three sub-programs. The sub-programs are sample registration, hardware control and data acquisition; and sample analysis. The data flow and connection between the sub-programs will be explained. The software is developed by using National Instrument LabView development package.

Automatic sample changer control software for automation of neutron activation analysis process in Malaysian Nuclear Agency

NASA Astrophysics Data System (ADS)

Yussup, N.; Ibrahim, M. M.; Rahman, N. A. A.; Mokhtar, M.; Salim, N. A. A.; Soh@Shaari, S. C.; Azman, A.; Lombigit, L.; Azman, A.; Omar, S. A.

2018-01-01

Most of the procedures in neutron activation analysis (NAA) process that has been established in Malaysian Nuclear Agency (Nuclear Malaysia) since 1980s were performed manually. These manual procedures carried out by the NAA laboratory personnel are time consuming and inefficient especially for sample counting and measurement process. The sample needs to be changed and the measurement software needs to be setup for every one hour counting time. Both of these procedures are performed manually for every sample. Hence, an automatic sample changer system (ASC) that consists of hardware and software is developed to automate sample counting process for up to 30 samples consecutively. This paper describes the ASC control software for NAA process which is designed and developed to control the ASC hardware and call GammaVision software for sample measurement. The software is developed by using National Instrument LabVIEW development package.

Navy Medical Information Storage and Retrieval System: Navy MEDISTARS. TR-1-71-Part 2, Manual of Indexing Terms; First Edition.

ERIC Educational Resources Information Center

Ramsey-Klee, Diane M.

A computer-based information storage and retrieval system was designed and implemented for processing Navy neuropsychiatric case history reports. The system design objectives were to produce a dynamic and flexible medical information processing tool. The system that was designed has been given the name NAVY MEDical Information STorage and…

Modelo Pedagogico de Educacion Primaria para Adultos: Manual para la Vinculacion y Funcionamiento de los Comites de Educacion para Adultos (A Teaching Model for Adult Primary Education: Manual for the Continuation and Operation of Adult Education Committees).

ERIC Educational Resources Information Center

Instituto Nacional para la Educacion de los Adultos, Mexico City (Mexico).

This manual is part of a Mexican series of instructional materials designed for Spanish speaking adults who are in the process of becoming literate or have recently become literate in their native language. This document describes the concept of a model for community adult education for the purpose of supporting local educational committees…

Conference for Women Administrators: Financial Management of Colleges and Universities.

ERIC Educational Resources Information Center

National Association of College and University Business Officers, Washington, DC.

The process for organizing and conducting a conference of finance and budgeting in higher education is described in this manual designed for use by groups interested in developing successful conferences in their regions. The manual is an outgrowth of a series of conferences sponsored by the Committee for the Concerns of Women in New England…

National Household Education Survey of 1993. School Safety and Discipline Data File User's Manual.

ERIC Educational Resources Information Center

Brick, J. Michael; And Others

This manual provides documentation and guidance for users of the public release data file for the School Safety and Discipline component of the 1993 National Household Education Survey (NHES:93). Information about the purpose of the study, the data collection instruments, the sample design, and data collection and processing is presented. The…

Coding Manual for Continuous Observation of Interactions by Single Subjects in an Academic Setting.

ERIC Educational Resources Information Center

Cobb, Joseph A.; Hops, Hyman

The manual, designed particularly for work with acting-out or behavior problem students, describes coding procedures used in the observation of continuous classroom interactions between the student and his peers and teacher. Peer and/or teacher behaviors antecedent and consequent to the subject's behavior are identified in the coding process,…

Iterative User Interface Design for Automated Sequential Organ Failure Assessment Score Calculator in Sepsis Detection

PubMed Central

Herasevich, Vitaly

2017-01-01

Background The new sepsis definition has increased the need for frequent sequential organ failure assessment (SOFA) score recalculation and the clerical burden of information retrieval makes this score ideal for automated calculation. Objective The aim of this study was to (1) estimate the clerical workload of manual SOFA score calculation through a time-motion analysis and (2) describe a user-centered design process for an electronic medical record (EMR) integrated, automated SOFA score calculator with subsequent usability evaluation study. Methods First, we performed a time-motion analysis by recording time-to-task-completion for the manual calculation of 35 baseline and 35 current SOFA scores by 14 internal medicine residents over a 2-month period. Next, we used an agile development process to create a user interface for a previously developed automated SOFA score calculator. The final user interface usability was evaluated by clinician end users with the Computer Systems Usability Questionnaire. Results The overall mean (standard deviation, SD) time-to-complete manual SOFA score calculation time was 61.6 s (33). Among the 24% (12/50) usability survey respondents, our user-centered user interface design process resulted in >75% favorability of survey items in the domains of system usability, information quality, and interface quality. Conclusions Early stakeholder engagement in our agile design process resulted in a user interface for an automated SOFA score calculator that reduced clinician workload and met clinicians’ needs at the point of care. Emerging interoperable platforms may facilitate dissemination of similarly useful clinical score calculators and decision support algorithms as “apps.” A user-centered design process and usability evaluation should be considered during creation of these tools. PMID:28526675

Iterative User Interface Design for Automated Sequential Organ Failure Assessment Score Calculator in Sepsis Detection.

PubMed

Aakre, Christopher Ansel; Kitson, Jaben E; Li, Man; Herasevich, Vitaly

2017-05-18

The new sepsis definition has increased the need for frequent sequential organ failure assessment (SOFA) score recalculation and the clerical burden of information retrieval makes this score ideal for automated calculation. The aim of this study was to (1) estimate the clerical workload of manual SOFA score calculation through a time-motion analysis and (2) describe a user-centered design process for an electronic medical record (EMR) integrated, automated SOFA score calculator with subsequent usability evaluation study. First, we performed a time-motion analysis by recording time-to-task-completion for the manual calculation of 35 baseline and 35 current SOFA scores by 14 internal medicine residents over a 2-month period. Next, we used an agile development process to create a user interface for a previously developed automated SOFA score calculator. The final user interface usability was evaluated by clinician end users with the Computer Systems Usability Questionnaire. The overall mean (standard deviation, SD) time-to-complete manual SOFA score calculation time was 61.6 s (33). Among the 24% (12/50) usability survey respondents, our user-centered user interface design process resulted in >75% favorability of survey items in the domains of system usability, information quality, and interface quality. Early stakeholder engagement in our agile design process resulted in a user interface for an automated SOFA score calculator that reduced clinician workload and met clinicians' needs at the point of care. Emerging interoperable platforms may facilitate dissemination of similarly useful clinical score calculators and decision support algorithms as "apps." A user-centered design process and usability evaluation should be considered during creation of these tools. ©Christopher Ansel Aakre, Jaben E Kitson, Man Li, Vitaly Herasevich. Originally published in JMIR Human Factors (http://humanfactors.jmir.org), 18.05.2017.

An integrated exhaust gas analysis system with self-contained data processing and automatic calibration

NASA Technical Reports Server (NTRS)

Anderson, R. C.; Summers, R. L.

1981-01-01

An integrated gas analysis system designed to operate in automatic, semiautomatic, and manual modes from a remote control panel is described. The system measures the carbon monoxide, oxygen, water vapor, total hydrocarbons, carbon dioxide, and oxides of nitrogen. A pull through design provides increased reliability and eliminates the need for manual flow rate adjustment and pressure correction. The system contains two microprocessors to range the analyzers, calibrate the system, process the raw data to units of concentration, and provides information to the facility research computer and to the operator through terminal and the control panels. After initial setup, the system operates for several hours without significant operator attention.

Development and evaluation of an interactive electronic laboratory manual for cooperative learning of medical histology.

PubMed

Khalil, Mohammed K; Kirkley, Debbie L; Kibble, Jonathan D

2013-01-01

This article describes the development of an interactive computer-based laboratory manual, created to facilitate the teaching and learning of medical histology. The overarching goal of developing the manual is to facilitate self-directed group interactivities that actively engage students during laboratory sessions. The design of the manual includes guided instruction for students to navigate virtual slides, exercises for students to monitor learning, and cases to provide clinical relevance. At the end of the laboratory activities, student groups can generate a laboratory report that may be used to provide formative feedback. The instructional value of the manual was evaluated by a questionnaire containing both closed-ended and open-ended items. Closed-ended items using a five-point Likert-scale assessed the format and navigation, instructional contents, group process, and learning process. Open-ended items assessed student's perception on the effectiveness of the manual in facilitating their learning. After implementation for two consecutive years, student evaluation of the manual was highly positive and indicated that it facilitated their learning by reinforcing and clarifying classroom sessions, improved their understanding, facilitated active and cooperative learning, and supported self-monitoring of their learning. Copyright © 2013 American Association of Anatomists.

Data Processing Technician 3 and 2: Revised 1973.

ERIC Educational Resources Information Center

Naval Training Publications Detachment, Washington, DC.

The training manual is designed to train naval personnel in the professional aspects of their rating as Data Processing (DP) Technician and is a direct help to meeting the occupational qualifications for advancement to Data Processing Technician Third Class and Data Processing Technician Second Class. Personnel of the Data Processing Technician…

Adaptive automation of human-machine system information-processing functions.

PubMed

Kaber, David B; Wright, Melanie C; Prinzel, Lawrence J; Clamann, Michael P

2005-01-01

The goal of this research was to describe the ability of human operators to interact with adaptive automation (AA) applied to various stages of complex systems information processing, defined in a model of human-automation interaction. Forty participants operated a simulation of an air traffic control task. Automated assistance was adaptively applied to information acquisition, information analysis, decision making, and action implementation aspects of the task based on operator workload states, which were measured using a secondary task. The differential effects of the forms of automation were determined and compared with a manual control condition. Results of two 20-min trials of AA or manual control revealed a significant effect of the type of automation on performance, particularly during manual control periods as part of the adaptive conditions. Humans appear to better adapt to AA applied to sensory and psychomotor information-processing functions (action implementation) than to AA applied to cognitive functions (information analysis and decision making), and AA is superior to completely manual control. Potential applications of this research include the design of automation to support air traffic controller information processing.

The Neural Basis of Speech Perception through Lipreading and Manual Cues: Evidence from Deaf Native Users of Cued Speech

PubMed Central

Aparicio, Mario; Peigneux, Philippe; Charlier, Brigitte; Balériaux, Danielle; Kavec, Martin; Leybaert, Jacqueline

2017-01-01

We present here the first neuroimaging data for perception of Cued Speech (CS) by deaf adults who are native users of CS. CS is a visual mode of communicating a spoken language through a set of manual cues which accompany lipreading and disambiguate it. With CS, sublexical units of the oral language are conveyed clearly and completely through the visual modality without requiring hearing. The comparison of neural processing of CS in deaf individuals with processing of audiovisual (AV) speech in normally hearing individuals represents a unique opportunity to explore the similarities and differences in neural processing of an oral language delivered in a visuo-manual vs. an AV modality. The study included deaf adult participants who were early CS users and native hearing users of French who process speech audiovisually. Words were presented in an event-related fMRI design. Three conditions were presented to each group of participants. The deaf participants saw CS words (manual + lipread), words presented as manual cues alone, and words presented to be lipread without manual cues. The hearing group saw AV spoken words, audio-alone and lipread-alone. Three findings are highlighted. First, the middle and superior temporal gyrus (excluding Heschl’s gyrus) and left inferior frontal gyrus pars triangularis constituted a common, amodal neural basis for AV and CS perception. Second, integration was inferred in posterior parts of superior temporal sulcus for audio and lipread information in AV speech, but in the occipito-temporal junction, including MT/V5, for the manual cues and lipreading in CS. Third, the perception of manual cues showed a much greater overlap with the regions activated by CS (manual + lipreading) than lipreading alone did. This supports the notion that manual cues play a larger role than lipreading for CS processing. The present study contributes to a better understanding of the role of manual cues as support of visual speech perception in the framework of the multimodal nature of human communication. PMID:28424636

ANSI/ASHRAE/IES Standard 90.1-2016 Performance Rating Method Reference Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goel, Supriya; Rosenberg, Michael I.; Eley, Charles

This document is intended to be a reference manual for the Appendix G Performance Rating Method (PRM) of ANSI/ASHRAE/IES Standard 90.1-2016 (Standard 90.1-2016). The PRM can be used to demonstrate compliance with the standard and to rate the energy efficiency of commercial and high-rise residential buildings with designs that exceed the requirements of Standard 90.1. Use of the PRM for demonstrating compliance with Standard 90.1 is a new feature of the 2016 edition. The procedures and processes described in this manual are designed to provide consistency and accuracy by filling in gaps and providing additional details needed by users ofmore » the PRM.« less

The Photonovel: A Tool for Development. Program and Training Journal Manual Series Number 4.

ERIC Educational Resources Information Center

Weaks, Daniel

Designed as a working and teaching tool for development workers, this manual includes the step-by-step process for preparing a photonovel. Chapter 1 introduces the photonovel, a blend of comic book and motion picture that substitutes photographs for the stylized drawings. It lists its advantages and disadvantages as an educational medium and tool…

Flat-plate solar array project: Experimental process system development unit for producing semiconductor-grade silicon using the silane-to-silicon process

NASA Technical Reports Server (NTRS)

1981-01-01

The engineering design, fabrication, assembly, operation, economic analysis, and process support research and development for an Experimental Process System Development Unit for producing semiconductor-grade silicon using the slane-to-silicon process are reported. The design activity was completed. About 95% of purchased equipment was received. The draft of the operations manual was about 50% complete and the design of the free-space system continued. The system using silicon power transfer, melting, and shotting on a psuedocontinuous basis was demonstrated.

PROCESS DESIGN MANUAL FOR LAND TREATMENT OF MUNICIPAL WASTEWATER

EPA Science Inventory

The USEPA guidance on land treatment of municipal and industrial wastewater is updated for the first time since 1984. The significant new technilogical changes include phytoremediation, vadose zone monitoring, new design approaches to surface irrigation, center pivot irrigation,...

From acute musculoskeletal pain to chronic widespread pain and fibromyalgia: application of pain neurophysiology in manual therapy practice.

PubMed

Nijs, Jo; Van Houdenhove, Boudewijn

2009-02-01

During the past decade, scientific research has provided new insight into the development from an acute, localised musculoskeletal disorder towards chronic widespread pain/fibromyalgia (FM). Chronic widespread pain/FM is characterised by sensitisation of central pain pathways. An in-depth review of basic and clinical research was performed to design a theoretical framework for manual therapy in these patients. It is explained that manual therapy might be able to influence the process of chronicity in three different ways. (I) In order to prevent chronicity in (sub)acute musculoskeletal disorders, it seems crucial to limit the time course of afferent stimulation of peripheral nociceptors. (II) In the case of chronic widespread pain and established sensitisation of central pain pathways, relatively minor injuries/trauma at any locations are likely to sustain the process of central sensitisation and should be treated appropriately with manual therapy accounting for the decreased sensory threshold. Inappropriate pain beliefs should be addressed and exercise interventions should account for the process of central sensitisation. (III) However, manual therapists ignoring the processes involved in the development and maintenance of chronic widespread pain/FM may cause more harm then benefit to the patient by triggering or sustaining central sensitisation.

RX for science literacy: The what, where, how, and why of health science research (A teacher`s manual about biomedical research)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoffman, K.S.

1994-12-31

When the North Carolina Association for Biomedical Research (NCABR) surveyed the state`s science teachers in March 1993, 92% of those responding requested information related to biomedical research. Most of the teachers requested lesson plans and activities designed to help them give students an accurate and balanced perspective on research. In response to that need, NCABR has recently completed production of a 300-page teacher`s manual that provides an overview of the biomedical research process and describes the role and care of animals in that process. Rx for Science Literacy incorporates background information, lesson plans, handouts and activities to assist teachers inmore » K-12 classrooms. Developed by a science teacher with assistance from science and education experts, the manual captures the complex biomedical research process in an easy-to-follow, easy-to-use format. In North Carolina, NCABR plans to begin these workshops in fall 1994. The workshops will include a tour of a biomedical research laboratory and on-site presentations by bench scientists. Teacher evaluation of the manual will be structured into the workshop program. The manual is available at cost to all interested individuals and organizations.« less

Identification of potential neuromotor mechanisms of manual therapy in patients with musculoskeletal disablement: rationale and description of a clinical trial

PubMed Central

Fisher, Beth E; Davenport, Todd E; Kulig, Kornelia; Wu, Allan D

2009-01-01

Background Many health care practitioners use a variety of hands-on treatments to improve symptoms and disablement in patients with musculoskeletal pathology. Research to date indirectly suggests a potentially broad effect of manual therapy on the neuromotor processing of functional behavior within the supraspinal central nervous system (CNS) in a manner that may be independent of modification at the level of local spinal circuits. However, the effect of treatment speed, as well as the specific mechanism and locus of CNS changes, remain unclear. Methods/Design We developed a placebo-controlled, randomized study to test the hypothesis that manual therapy procedures directed to the talocrural joint in individuals with post-acute ankle sprain induce a change in corticospinal excitability that is relevant to improve the performance of lower extremity functional behavior. Discussion This study is designed to identify potential neuromotor changes associated with manual therapy procedures directed to the appendicular skeleton, compare the relative effect of treatment speed on potential neuromotor effects of manual therapy procedures, and determine the behavioral relevance of potential neuromotor effects of manual therapy procedures. Trial Registration identifier NCT00847769. PMID:19460169

ANSI/ASHRAE/IES Standard 90.1-2010 Performance Rating Method Reference Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goel, Supriya; Rosenberg, Michael I.

This document is intended to be a reference manual for the Appendix G Performance Rating Method (PRM) of ANSI/ASHRAE/IES Standard 90.1- 2010 (Standard 90.1-2010).The PRM is used for rating the energy efficiency of commercial and high-rise residential buildings with designs that exceed the requirements of Standard 90.1. The procedures and processes described in this manual are designed to provide consistency and accuracy by filling in gaps and providing additional details needed by users of the PRM. It should be noted that this document is created independently from ASHRAE and SSPC 90.1 and is not sanctioned nor approved by either ofmore » those entities . Potential users of this manual include energy modelers, software developers and implementers of “beyond code” energy programs. Energy modelers using ASHRAE Standard 90.1-2010 for beyond code programs can use this document as a reference manual for interpreting requirements of the Performance Rating method. Software developers, developing tools for automated creation of the baseline model can use this reference manual as a guideline for developing the rules for the baseline model.« less

Sealed-cell nickel-cadmium battery applications manual

NASA Technical Reports Server (NTRS)

Scott, W. R.; Rusta, D. W.

1979-01-01

The design, procurement, testing, and application of aerospace quality, hermetically sealed nickel-cadmium cells and batteries are presented. Cell technology, cell and battery development, and spacecraft applications are emphasized. Long term performance is discussed in terms of the effect of initial design, process, and application variables. Design guidelines and practices are given.

Praxis language reference manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, J.H.

1981-01-01

This document is a language reference manual for the programming language Praxis. The document contains the specifications that must be met by any compiler for the language. The Praxis language was designed for systems programming in real-time process applications. Goals for the language and its implementations are: (1) highly efficient code generated by the compiler; (2) program portability; (3) completeness, that is, all programming requirements can be met by the language without needing an assembler; and (4) separate compilation to aid in design and management of large systems. The language does not provide any facilities for input/output, stack and queuemore » handling, string operations, parallel processing, or coroutine processing. These features can be implemented as routines in the language, using machine-dependent code to take advantage of facilities in the control environment on different machines.« less

Extent and Impacts of the Virginia Department of Transportation’s Exception Process for Access Management Design Standards

DOT National Transportation Integrated Search

2018-06-01

The Virginia Department of Transportation (VDOT) Road Design Manual requires that new commercial entrances meet certain minimum spacing standards depending on a facilitys speed limit and functional classification. Landowners, however, may request ...

User Manuals for a Primary Care Electronic Medical Record System: A Mixed Methods Study of User- and Vendor-Generated Documents

PubMed Central

Dow, Rustam; Barnsley, Jan; Tu, Karen; Domb, Sharon; Jadad, Alejandro R.; Lemieux-Charles, Louise

2015-01-01

Research problem Tutorials and user manuals are important forms of impersonal support for using software applications including electronic medical records (EMRs). Differences between user- and vendor documentation may indicate support needs, which are not sufficiently addressed by the official documentation, and reveal new elements that may inform the design of tutorials and user manuals. Research question What are the differences between user-generated tutorials and manuals for an EMR and the official user manual from the software vendor? Literature review Effective design of tutorials and user manuals requires careful packaging of information, balance between declarative and procedural texts, an action and task-oriented approach, support for error recognition and recovery, and effective use of visual elements. No previous research compared these elements between formal and informal documents. Methodology We conducted an mixed methods study. Seven tutorials and two manuals for an EMR were collected from three family health teams and compared with the official user manual from the software vendor. Documents were qualitatively analyzed using a framework analysis approach in relation to the principles of technical documentation described above. Subsets of the data were quantitatively analyzed using cross-tabulation to compare the types of error information and visual cues in screen captures between user- and vendor-generated manuals. Results and discussion The user-developed tutorials and manuals differed from the vendor-developed manual in that they contained mostly procedural and not declarative information; were customized to the specific workflow, user roles, and patient characteristics; contained more error information related to work processes than to software usage; and used explicit visual cues on screen captures to help users identify window elements. These findings imply that to support EMR implementation, tutorials and manuals need to be customized and adapted to specific organizational contexts and workflows. The main limitation of the study is its generalizability. Future research should address this limitation and may explore alternative approaches to software documentation, such as modular manuals or participatory design. PMID:26190888

Operating manual-based usability evaluation of medical devices: an effective patient safety screening method.

PubMed

Turley, James P; Johnson, Todd R; Smith, Danielle Paige; Zhang, Jaijie; Brixey, Juliana J

2006-04-01

Use of medical devices often directly contributes to medical errors. Because it is difficult or impossible to change the design of existing devices, the best opportunity for improving medical device safety is during the purchasing process. However, most hospital personnel are not familiar with the usability evaluation methods designed to identify aspects of a user interface that do not support intuitive and safe use. A review of medical device operating manuals is proposed as a more practical method of usability evaluation. Operating manuals for five volumetric infusion pumps from three manufacturers were selected for this study (January-April 2003). Each manual's safety message content was evaluated to determine whether the message indicated a device design characteristic that violated known usability principles (heuristics) or indicated a violation of an affordance of the device. "Minimize memory load," with 65 violations, was the heuristic violated most frequently across pumps. Variations between pumps, including the frequency and severity of violations for each, were noted. Results suggest that manual review can provide a proxy for heuristic evaluation of the actual medical device. This method, intended to be a component of prepurchasing evaluation, can complement more formal usability evaluation methods and be used to select a subset of devices for more extensive and formal testing.

Manualization of Occupational Therapy Interventions: Illustrations from the Pressure Ulcer Prevention Research Program

PubMed Central

Blanche, Erna Imperatore; Fogelberg, Donald; Diaz, Jesus; Carlson, Mike; Clark, Florence

2011-01-01

The manualization of a complex occupational therapy intervention is a crucial step in ensuring treatment fidelity for both clinical application and research purposes. Towards this latter end, intervention manuals are essential for assuring trustworthiness and replicability of randomized controlled trials (RCT’s) that aim to provide evidence of the effectiveness of occupational therapy. In this paper, literature on the process of intervention manualization is reviewed. The prescribed steps are then illustrated through our experience in implementing the University of Southern California/Rancho Los Amigos National Rehabilitation Center’s collaborative Pressure Ulcer Prevention Project (PUPP). In this research program, qualitative research provided the initial foundation for manualization of a multifaceted occupational therapy intervention designed to reduce incidence of medically serious pressure ulcers in people with SCI. PMID:22214116

Evaluating the iterative development of VR/AR human factors tools for manual work.

PubMed

Liston, Paul M; Kay, Alison; Cromie, Sam; Leva, Chiara; D'Cruz, Mirabelle; Patel, Harshada; Langley, Alyson; Sharples, Sarah; Aromaa, Susanna

2012-01-01

This paper outlines the approach taken to iteratively evaluate a set of VR/AR (virtual reality / augmented reality) applications for five different manual-work applications - terrestrial spacecraft assembly, assembly-line design, remote maintenance of trains, maintenance of nuclear reactors, and large-machine assembly process design - and examines the evaluation data for evidence of the effectiveness of the evaluation framework as well as the benefits to the development process of feedback from iterative evaluation. ManuVAR is an EU-funded research project that is working to develop an innovative technology platform and a framework to support high-value, high-knowledge manual work throughout the product lifecycle. The results of this study demonstrate the iterative improvements reached throughout the design cycles, observable through the trending of the quantitative results from three successive trials of the applications and the investigation of the qualitative interview findings. The paper discusses the limitations of evaluation in complex, multi-disciplinary development projects and finds evidence of the effectiveness of the use of the particular set of complementary evaluation methods incorporating a common inquiry structure used for the evaluation - particularly in facilitating triangulation of the data.

Next Generation Loading System for Detonators and Primers

DTIC Science & Technology

Designed , fabricated and installed next generation tooling to provide additional manufacturing capabilities for new detonators and other small...prototype munitions on automated, semi-automated and manual machines. Lead design effort, procured and installed a primary explosive Drying Oven for a pilot...facility. Designed , fabricated and installed a Primary Explosives Waste Treatment System in a pilot environmental processing facility. Designed

Professional involvement in the design of accreditation manuals.

PubMed

Reyes-Alcázar, Víctor; Sotillos-González, Belén; Valverde, Jose A; Torres-Olivera, Antonio

2011-01-01

This paper aims to describe the participation of health professionals as key agents for the successful definition of skills manuals supporting professional accreditation in Andalusia (Spain). The increasing extent to which different stakeholders are recognized reflects the importance they hold in all decision-making processes. The Andalusian Agency for Healthcare Quality's commitment to this process has facilitated the healthcare professionals' participation when professional skills manuals are designed for their respective specialities. The process involved over 400 healthcare professionals from 58 disciplines between March 2005 and January 2008. Results were conditioned by several factors, some acting as drivers while others represented a barrier. The experience relates to a specific geographical context. Healthcare professionals eligible to participate had to be in active employment and working for the Andalusian Public Health Service. There was an overrepresentation of members from scientific associations. Co-operation based on mutual trust is the essential ingredient accounting for the success of participative involvement. The paper incorporates all categories of personnel and specialities in a regional healthcare system that covers eight million inhabitants and employs over 90,000 professionals, includes 33 public hospitals, more than 1,500 primary care centres and other healthcare units.

Nutrient Control Design Manual

EPA Science Inventory

The purpose of this EPA design manual is to provide updated, state‐of‐the‐technology design guidance on nitrogen and phosphorus control at municipal Wastewater Treatment Plants (WWTPs). Similar to previous EPA manuals, this manual contains extensive information on the principles ...

Soldier Data Tag Study Effort. Appendices,

DTIC Science & Technology

1985-06-10

funds was made possible through a manual sight comparison . *" of the signature contained on two documents. This general process was cons~s- tent...account access in the form of personal identification and data security will become more acute, and will require an interpretation of what legally...that is ., .,. B-i foolproof, uncomplicated, and can be operated both manually and electronic- ally. It appears that designers are now leaning toward

LIFE CYCLE DESIGN GUIDANCE MANUAL: ENVIRONMENTAL REQUIREMENTS AND THE PRODUCT SYSTEM

EPA Science Inventory

This document seeks to promote the reduction of environmental impacts and health risks through a systems approach to design. he approach is based on the product life cycle, which includes raw materials acquisition and processing, manufacturing, use/service, resource recovery, and...

LIFE CYCLE DESIGN GUIDANCE MANUAL - ENVIRONMENTAL REQUIREMENTS AND THE PRODUCT SYSTEM

EPA Science Inventory

This document seeks to promote the reduction of environmental impacts and health risks through a systems approach to design. The approach is based on die product life cycle, which includes raw materials acquisition and processing, manufacturing, use/service, resource recovery, an...

Facilities Guidelines for Fine Arts Programs.

ERIC Educational Resources Information Center

Maryland State Dept. of Education, Baltimore.

This manual of facility guidelines examines the planning process and design features and considerations for public school fine arts programs in Maryland. Planning concepts and trends are highlighted followed by planning guidelines for dance, music, theater, visual arts, general education, and performance spaces. General design considerations…

Vocational Education Operations Analysis Process.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento. Vocational Education Services.

This manual on the vocational education operations analysis process is designed to provide vocational administrators/coordinators with an internal device to collect, analyze, and display vocational education performance data. The first section describes the system and includes the following: analysis worksheet, data sources, utilization, system…

Automated Design Space Exploration with Aspen

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spafford, Kyle L.; Vetter, Jeffrey S.

Architects and applications scientists often use performance models to explore a multidimensional design space of architectural characteristics, algorithm designs, and application parameters. With traditional performance modeling tools, these explorations forced users to first develop a performance model and then repeatedly evaluate and analyze the model manually. These manual investigations proved laborious and error prone. More importantly, the complexity of this traditional process often forced users to simplify their investigations. To address this challenge of design space exploration, we extend our Aspen (Abstract Scalable Performance Engineering Notation) language with three new language constructs: user-defined resources, parameter ranges, and a collection ofmore » costs in the abstract machine model. Then, we use these constructs to enable automated design space exploration via a nonlinear optimization solver. We show how four interesting classes of design space exploration scenarios can be derived from Aspen models and formulated as pure nonlinear programs. The analysis tools are demonstrated using examples based on Aspen models for a three-dimensional Fast Fourier Transform, the CoMD molecular dynamics proxy application, and the DARPA Streaming Sensor Challenge Problem. Our results show that this approach can compose and solve arbitrary performance modeling questions quickly and rigorously when compared to the traditional manual approach.« less

Automated Design Space Exploration with Aspen

DOE PAGES

Spafford, Kyle L.; Vetter, Jeffrey S.

2015-01-01

Architects and applications scientists often use performance models to explore a multidimensional design space of architectural characteristics, algorithm designs, and application parameters. With traditional performance modeling tools, these explorations forced users to first develop a performance model and then repeatedly evaluate and analyze the model manually. These manual investigations proved laborious and error prone. More importantly, the complexity of this traditional process often forced users to simplify their investigations. To address this challenge of design space exploration, we extend our Aspen (Abstract Scalable Performance Engineering Notation) language with three new language constructs: user-defined resources, parameter ranges, and a collection ofmore » costs in the abstract machine model. Then, we use these constructs to enable automated design space exploration via a nonlinear optimization solver. We show how four interesting classes of design space exploration scenarios can be derived from Aspen models and formulated as pure nonlinear programs. The analysis tools are demonstrated using examples based on Aspen models for a three-dimensional Fast Fourier Transform, the CoMD molecular dynamics proxy application, and the DARPA Streaming Sensor Challenge Problem. Our results show that this approach can compose and solve arbitrary performance modeling questions quickly and rigorously when compared to the traditional manual approach.« less

Manual Therapy Practices of Sobadores in North Carolina

PubMed Central

Graham, Alan; Sandberg, Joanne C.; Quandt, Sara A.; Mora, Dana C.

2016-01-01

Abstract Objectives: This analysis provides a description of the manual-therapy elements of sobadores practicing in North Carolina, using videotapes of patient treatment sessions. Design: Three sobadores allowed the video recording of eight patient treatment sessions (one each for two sobadores, six for the third sobador). Each of the recordings was reviewed by an experienced chiropractor who recorded the frequencies of seven defined manual-therapy elements: (1) treatment time; (2) patient position on treatment surface; (3) patient body part contacted by the sobador; (4) sobador examination methods; (5) primary treatment processes; (6) sobador body part area referencing patient; and (7) adjunctive treatment processes. Results: The range of treatment time of 9–30 min was similar to the treatment spectra that combine techniques used by conventional massage and manipulative practitioners. The patient positions on the treatment surface were not extraordinary, given the wide variety of treatment processes used, and indicated the sobadores treat patients in multiple positions. The patient body part contacted by the sobadores indicated that they were treating each of the major parts of the musculoskeletal system. Basic palpation dominated the sobadores' examination methods. The sobadores' primary treatment processes included significant variety, but rubbing was the dominant practice. The hands were the sobador body area that most often made contact with the patient. They all used lubricants. Conclusions: Sobadores' methods are similar to those of other manual-therapy practitioners. Additional study of video-recorded sobador practices is needed. Video-recorded practice of other traditional and conventional manual therapies for comparative analysis will help delineate the specific similarities and differences among the manual therapies. PMID:27400120

WATER QUALITY

EPA Science Inventory

This manual was develped to provide an overview of microfiltration and ultrafiltration technology for operators, administrators, engineers, scientists, educators, and anyone seeking an introduction to these processes. Chapters on theory, water quality, applications, design, equip...

Development of a manualized protocol of massage therapy for clinical trials in osteoarthritis.

PubMed

Ali, Ather; Kahn, Janet; Rosenberger, Lisa; Perlman, Adam I

2012-10-04

Clinical trial design of manual therapies may be especially challenging as techniques are often individualized and practitioner-dependent. This paper describes our methods in creating a standardized Swedish massage protocol tailored to subjects with osteoarthritis of the knee while respectful of the individualized nature of massage therapy, as well as implementation of this protocol in two randomized clinical trials. The manualization process involved a collaborative process between methodologic and clinical experts, with the explicit goals of creating a reproducible semi-structured protocol for massage therapy, while allowing some latitude for therapists' clinical judgment and maintaining consistency with a prior pilot study. The manualized protocol addressed identical specified body regions with distinct 30- and 60-min protocols, using standard Swedish strokes. Each protocol specifies the time allocated to each body region. The manualized 30- and 60-min protocols were implemented in a dual-site 24-week randomized dose-finding trial in patients with osteoarthritis of the knee, and is currently being implemented in a three-site 52-week efficacy trial of manualized Swedish massage therapy. In the dose-finding study, therapists adhered to the protocols and significant treatment effects were demonstrated. The massage protocol was manualized, using standard techniques, and made flexible for individual practitioner and subject needs. The protocol has been applied in two randomized clinical trials. This manualized Swedish massage protocol has real-world utility and can be readily utilized both in the research and clinical settings. Clinicaltrials.gov NCT00970008 (18 August 2009).

Designing Therapeutic Recreation Programs in the Community.

ERIC Educational Resources Information Center

Carter, Marcia Jean; And Others

This publication is designed to assist in the development of therapeutic recreation services in the community and may also be used in the preparation of procedural manuals or risk management plans. Therapeutic recreation is defined as the process of assessment, planning, implementation, and evaluation, applied through a helping relationship to…

Improving visual search in instruction manuals using pictograms.

PubMed

Kovačević, Dorotea; Brozović, Maja; Možina, Klementina

2016-11-01

Instruction manuals provide important messages about the proper use of a product. They should communicate in such a way that they facilitate users' searches for specific information. Despite the increasing research interest in visual search, there is a lack of empirical knowledge concerning the role of pictograms in search performance during the browsing of a manual's pages. This study investigates how the inclusion of pictograms improves the search for the target information. Furthermore, it examines whether this search process is influenced by the visual similarity between the pictograms and the searched for information. On the basis of eye-tracking measurements, as objective indicators of the participants' visual attention, it was found that pictograms can be a useful element of search strategy. Another interesting finding was that boldface highlighting is a more effective method for improving user experience in information seeking, rather than the similarity between the pictorial and adjacent textual information. Implications for designing effective user manuals are discussed. Practitioner Summary: Users often view instruction manuals with the aim of finding specific information. We used eye-tracking technology to examine different manual pages in order to improve the user's visual search for target information. The results indicate that the use of pictograms and bold highlighting of relevant information facilitate the search process.

Duplicate Class IV (Lumber) Ordering Within Defense Logistics Agency and Its Impact in Each Combatant Command

DTIC Science & Technology

2015-12-01

this vignette, the assumption is that all processes occur as they are designed with no variability, and that all lumber supply stocks have been...is available, then SGT Doe, or a designated command representative, can pick up the lumber at the SSA using a manual paper form, conducting a process...requested by SGT Doe’s order, then a new government contract is solicited after the designated contract administration service (CAS) approves the request

High-occupancy vehicle guidelines for planning, design and operations

DOT National Transportation Integrated Search

2003-08-01

These guidelines are not intended to supersede Caltrans : Transportation Planning Manual, Project Development : Procedures Manual, Highway Design Manual, Manual : on Uniform Traffic Control Devices (MUTCD) and : California Supplement to the MUTCD ...

Optimizing process and equipment efficiency using integrated methods

NASA Astrophysics Data System (ADS)

D'Elia, Michael J.; Alfonso, Ted F.

1996-09-01

The semiconductor manufacturing industry is continually riding the edge of technology as it tries to push toward higher design limits. Mature fabs must cut operating costs while increasing productivity to remain profitable and cannot justify large capital expenditures to improve productivity. Thus, they must push current tool production capabilities to cut manufacturing costs and remain viable. Working to continuously improve mature production methods requires innovation. Furthermore, testing and successful implementation of these ideas into modern production environments require both supporting technical data and commitment from those working with the process daily. At AMD, natural work groups (NWGs) composed of operators, technicians, engineers, and supervisors collaborate to foster innovative thinking and secure commitment. Recently, an AMD NWG improved equipment cycle time on the Genus tungsten silicide (WSi) deposition system. The team used total productive manufacturing (TPM) to identify areas for process improvement. Improved in-line equipment monitoring was achieved by constructing a real time overall equipment effectiveness (OEE) calculator which tracked equipment down, idle, qualification, and production times. In-line monitoring results indicated that qualification time associated with slow Inspex turn-around time and machine downtime associated with manual cleans contributed greatly to reduced availability. Qualification time was reduced by 75% by implementing a new Inspex monitor pre-staging technique. Downtime associated with manual cleans was reduced by implementing an in-situ plasma etch back to extend the time between manual cleans. A designed experiment was used to optimize the process. Time between 18 hour manual cleans has been improved from every 250 to every 1500 cycles. Moreover defect density realized a 3X improvement. Overall, the team achieved a 35% increase in tool availability. This paper details the above strategies and accomplishments.

Automatic latency equalization in VHDL-implemented complex pipelined systems

NASA Astrophysics Data System (ADS)

Zabołotny, Wojciech M.

2016-09-01

In the pipelined data processing systems it is very important to ensure that parallel paths delay data by the same number of clock cycles. If that condition is not met, the processing blocks receive data not properly aligned in time and produce incorrect results. Manual equalization of latencies is a tedious and error-prone work. This paper presents an automatic method of latency equalization in systems described in VHDL. The proposed method uses simulation to measure latencies and verify introduced correction. The solution is portable between different simulation and synthesis tools. The method does not increase the complexity of the synthesized design comparing to the solution based on manual latency adjustment. The example implementation of the proposed methodology together with a simple design demonstrating its use is available as an open source project under BSD license.

Bridging the gap in complementary and alternative medicine research: manualization as a means of promoting standardization and flexibility of treatment in clinical trials of acupuncture.

PubMed

Schnyer, Rosa N; Allen, John J B

2002-10-01

An important methodological challenge encountered in acupuncture clinical research involves the design of treatment protocols that help ensure standardization and replicability while allowing for the necessary flexibility to tailor treatments to each individual. Manualization of protocols used in clinical trials of acupuncture and other traditionally-based complementary and alternative medicine (CAM) systems facilitates the systematic delivery of replicable and standardized, yet individually-tailored treatments. To facilitate high-quality CAM acupuncture research by outlining a method for the systematic design and implementation of protocols used in CAM clinical trials based on the concept of treatment manualization. A series of treatment manuals was developed to systematically articulate the Chinese medical theoretical and clinical framework for a given Western-defined illness, to increase the quality and consistency of treatment, and to standardize the technical aspects of the protocol. In all, three manuals were developed for National Institutes of Health (NIH)-funded clinical trials of acupuncture for depression, spasticity in cerebral palsy, and repetitive stress injury. In Part I, the rationale underlying these manuals and the challenges encountered in creating them are discussed, and qualitative assessments of their utility are provided. In Part II, a methodology to develop treatment manuals for use in clinical trials is detailed, and examples are given. A treatment manual provides a precise way to train and supervise practitioners, enable evaluation of conformity and competence, facilitate the training process, and increase the ability to identify the active therapeutic ingredients in clinical trials of acupuncture.

A Course on Operational Considerations in Wastewater Treatment Plant Design. Instructor's Manual.

ERIC Educational Resources Information Center

Cooper, John W.; And Others

This manual contains 17 instructional units (sequenced to correspond to parallel chapters in a student's manual) focusing on upgrading the design of wastewater plant facilities and serving as a reference source for establishing criteria for upgrading wastewater treatment plants. The manual also furnishes information for modifying plant design to…

BASIC Language Flow Charting Program (BASCHART). Technical Note 3-82.

ERIC Educational Resources Information Center

Johnson, Charles C.; And Others

This document describes BASCHART, a computer aid designed to decipher and automatically flow chart computer program logic; it also provides the computer code necessary for this process. Developed to reduce the labor intensive manual process of producing a flow chart for an undocumented or inadequately documented program, BASCHART will…

Radiographic Film Processing Quality Assurance: A Self-Teaching Workbook. Quality Assurance Series.

ERIC Educational Resources Information Center

Goldman, Lee W.

This workbook has been designed for use in conjunction with the manual, "Photographic Quality Assurance in Diagnostic Radiology, Nuclear Medicine and Radiation Therapy." Presented are several typical problems arising from the existence of variability and fluctuations in the automatic processing of radiographs, which unless corrected, can…

Beyond the Enthymeme: Sorites, Critical Thinking, and the Composing Process.

ERIC Educational Resources Information Center

Hill, Carolyn

A teacher presents a writing exercise designed to facilitate audience-directed, critical thinking during the process of composing, that starts students thinking in terms of sorites and enthymemes. Students first read a CIA manual, "Psychological Operations in Guerrilla Warfare," that instructs the Contra guerrillas in illegal acts and…

Cooper Screening of Information Processing (C-SIP). Administrator's Manual.

ERIC Educational Resources Information Center

Cooper, Richard

This document is designed to assist individuals administering the Cooper Screening of Information Processing (C-SIP), which is intended as a diagnostic teaching tool that allows teachers or others to determine, in a conversational setting, whether a person manifests any common characteristics of learning problems. After a brief introduction, a…

The preliminary SOL (Sizing and Optimization Language) reference manual

NASA Technical Reports Server (NTRS)

Lucas, Stephen H.; Scotti, Stephen J.

1989-01-01

The Sizing and Optimization Language, SOL, a high-level special-purpose computer language has been developed to expedite application of numerical optimization to design problems and to make the process less error-prone. This document is a reference manual for those wishing to write SOL programs. SOL is presently available for DEC VAX/VMS systems. A SOL package is available which includes the SOL compiler and runtime library routines. An overview of SOL appears in NASA TM 100565.

Implementation of in-line infrared monitor in full-scale anaerobic digestion process.

PubMed

Spanjers, H; Bouvier, J C; Steenweg, P; Bisschops, I; van Gils, W; Versprille, B

2006-01-01

During start up but also during normal operation, anaerobic reactor systems should be run and monitored carefully to secure trouble-free operation, because the process is vulnerable to disturbances such as temporary overloading, biomass wash out and influent toxicity. The present method of monitoring is usually by manual sampling and subsequent laboratory analysis. Data collection, processing and feedback to system operation is manual and ad hoc, and involves high-level operator skills and attention. As a result, systems tend to be designed at relatively conservative design loading rates resulting in significant over-sizing of reactors and thus increased systems cost. It is therefore desirable to have on-line and continuous access to performance data on influent and effluent quality. Relevant variables to indicate process performance include VFA, COD, alkalinity, sulphate, and, if aerobic post-treatment is considered, total nitrogen, ammonia and nitrate. Recently, mid-IR spectrometry was demonstrated on a pilot scale to be suitable for in-line simultaneous measurement of these variables. This paper describes a full-scale application of the technique to test its ability to monitor continuously and without human intervention the above variables simultaneously in two process streams. For VFA, COD, sulphate, ammonium and TKN good agreement was obtained between in-line and manual measurements. During a period of six months the in-line measurements had to be interrupted several times because of clogging. It appeared that the sample pre-treatment unit was not able to cope with high solids concentrations all the time.

Precise Evaluation of Anthropometric 2D Software Processing of Hand in Comparison with Direct Method

PubMed Central

Habibi, Ehsanollah; Soury, Shiva; Zadeh, Akbar Hasan

2013-01-01

Various studies carried out on different photo anthropometry, but each one had some deficiencies which during the years they have been resolved. The objective of this paper is to test the efficiency of two-dimensional image processing software in photo anthropometry of hand. In this applied research, 204 office workers and industrial workers were selected. Their hands were measured by manual with photo anthropometric methods. In this study, designing the “Hand Photo Anthropometry Set,” we tried to fix the angle and distance of the camera in all of the photos. Thus, some of the common mistakes in photo anthropometric method got controlled. The taken photos were analyzed by Digimizer software, version 4.1.1.0 and Digital Caliper (Model: Mitutoyo Corp., Tokyo, Japan) was used via manual method. t-test statistical test on data revealed that there is no significant difference between the manual and photo anthropometric results (P > 0.05) and the correlation coefficients for hand dimensions are similar in both methods illustrated in the range of 0.71-0.95. The statistical analyses showed that photo anthropometry can be replaced with manual methods. Furthermore, it can provide a great help to develop an anthropometric database for work gloves manufacturers. Since the hand anthropometry is a necessary input for tool design, this survey can be used to determine the percentiles of workers’ hands. PMID:24696802

An Instrumented Glove to Assess Manual Dexterity in Simulation-Based Neurosurgical Education

PubMed Central

Lemos, Juan Diego; Hernandez, Alher Mauricio; Soto-Romero, Georges

2017-01-01

The traditional neurosurgical apprenticeship scheme includes the assessment of trainee’s manual skills carried out by experienced surgeons. However, the introduction of surgical simulation technology presents a new paradigm where residents can refine surgical techniques on a simulator before putting them into practice in real patients. Unfortunately, in this new scheme, an experienced surgeon will not always be available to evaluate trainee’s performance. For this reason, it is necessary to develop automatic mechanisms to estimate metrics for assessing manual dexterity in a quantitative way. Authors have proposed some hardware-software approaches to evaluate manual dexterity on surgical simulators. This paper presents IGlove, a wearable device that uses inertial sensors embedded on an elastic glove to capture hand movements. Metrics to assess manual dexterity are estimated from sensors signals using data processing and information analysis algorithms. It has been designed to be used with a neurosurgical simulator called Daubara NS Trainer, but can be easily adapted to another benchtop- and manikin-based medical simulators. The system was tested with a sample of 14 volunteers who performed a test that was designed to simultaneously evaluate their fine motor skills and the IGlove’s functionalities. Metrics obtained by each of the participants are presented as results in this work; it is also shown how these metrics are used to automatically evaluate the level of manual dexterity of each volunteer. PMID:28468268

Nutrient Control Design Manual

EPA Science Inventory

The Nutrient Control Design Manual will present an extensive state-of-the-technology review of the engineering design and operation of nitrogen and phosphorous control technologies and techniques applied at municipal wastewater treatment plants (WWTPs). This manual will present ...

Optimizing the balance between task automation and human manual control in simulated submarine track management.

PubMed

Chen, Stephanie I; Visser, Troy A W; Huf, Samuel; Loft, Shayne

2017-09-01

Automation can improve operator performance and reduce workload, but can also degrade operator situation awareness (SA) and the ability to regain manual control. In 3 experiments, we examined the extent to which automation could be designed to benefit performance while ensuring that individuals maintained SA and could regain manual control. Participants completed a simulated submarine track management task under varying task load. The automation was designed to facilitate information acquisition and analysis, but did not make task decisions. Relative to a condition with no automation, the continuous use of automation improved performance and reduced subjective workload, but degraded SA. Automation that was engaged and disengaged by participants as required (adaptable automation) moderately improved performance and reduced workload relative to no automation, but degraded SA. Automation engaged and disengaged based on task load (adaptive automation) provided no benefit to performance or workload, and degraded SA relative to no automation. Automation never led to significant return-to-manual deficits. However, all types of automation led to degraded performance on a nonautomated task that shared information processing requirements with automated tasks. Given these outcomes, further research is urgently required to establish how to design automation to maximize performance while keeping operators cognitively engaged. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Automated processing of endoscopic surgical instruments.

PubMed

Roth, K; Sieber, J P; Schrimm, H; Heeg, P; Buess, G

1994-10-01

This paper deals with the requirements for automated processing of endoscopic surgical instruments. After a brief analysis of the current problems, solutions are discussed. Test-procedures have been developed to validate the automated processing, so that the cleaning results are guaranteed and reproducable. Also a device for testing and cleaning was designed together with Netzsch Newamatic and PCI, called TC-MIC, to automate processing and reduce manual work.

Designing a User Manual to Support an In-House Database.

ERIC Educational Resources Information Center

Kraft, Melissa A.; Pugh, W. Jean

1988-01-01

Describes the steps involved in designing a user manual for an in-house database. Topics covered include goal definition, target audience identification, production scheduling, design and production choices, testing and review, and updating of the manual. (CLB)

Flexible and composite structures for premium pavements. Volume 2, Design manual

DOT National Transportation Integrated Search

1980-11-01

This design manual presents the results of a detailed study to identify and design flexible and composite pavement configurations which will perform as premium or "zero-maintenance" pavements. This manual includes identification and classification of...

Systems Engineering of Unmanned DoD Systems: Following the Joint Capabilities Integration and Development System/Defense Acquisition System Process to Develop an Unmanned Ground Vehicle System

DTIC Science & Technology

2015-12-01

Manual D-A-1). APAs are “Performance attributes of a system not important enough to be considered KPPs or KSAs, but still appropriate to include in...the CDD or CPD are designated as APAs ” (JCIDS Manual D-A-1). The requirements are expressed using Thresholds (T) and Objectives (O). “Performance...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA SYSTEMS ENGINEERING CAPSTONE PROJECT REPORT Approved for public release; distribution is

IGDS/TRAP Interface Program (ITIP). Software User Manual (SUM). [network flow diagrams for coal gasification studies

NASA Technical Reports Server (NTRS)

Jefferys, S.; Johnson, W.; Lewis, R.; Rich, R.

1981-01-01

This specification establishes the requirements, concepts, and preliminary design for a set of software known as the IGDS/TRAP Interface Program (ITIP). This software provides the capability to develop at an Interactive Graphics Design System (IGDS) design station process flow diagrams for use by the NASA Coal Gasification Task Team. In addition, ITIP will use the Data Management and Retrieval System (DMRS) to maintain a data base from which a properly formatted input file to the Time-Line and Resources Analysis Program (TRAP) can be extracted. This set of software will reside on the PDP-11/70 and will become the primary interface between the Coal Gasification Task Team and IGDS, DMRS, and TRAP. The user manual for the computer program is presented.

Marketing Your Adult Literacy Program: A "How To" Manual. Revised.

ERIC Educational Resources Information Center

Smith, Barbara E.

This document presents a training module designed to help adult literacy program providers in New York and elsewhere to use the principles of social marketing to improve recruitment and retention in adult education programming. Literacy program providers are taught to view the social marketing process as a process of exchange between themselves as…

A Model for Linking Vocational Education and Industry.

ERIC Educational Resources Information Center

Thomas, Hollie B.

A developmental research activity was undertaken to create and field test a systematic process designed to assist vocational educators to form linkages with business and industry. The literature was synthesized to ascertain what has been learned about the linkage process and coordination theory and has served as a basis for writing a manual for…

TOPEX SDR Processing, October 1998. Volume 4

NASA Technical Reports Server (NTRS)

Lee, Jeffrey E.; Lockwood, Dennis W.

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Sensor Data Record (SDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Manual para Compradores de Casas (Homebuyer's Guide).

ERIC Educational Resources Information Center

Sindt, Roger P.; Harris, Jack

Designed to assist prospective buyers in making such important decisions as whether to buy a new or older home and within what price range, the guide, written in Spanish, provides information on the purchase process. Discussion of the purchase process covers the life-cycle costs (recurring homeownership costs that must be met every month);…

A Procedure for Structural Weight Estimation of Single Stage to Orbit Launch Vehicles (Interim User's Manual)

NASA Technical Reports Server (NTRS)

Martinovic, Zoran N.; Cerro, Jeffrey A.

2002-01-01

This is an interim user's manual for current procedures used in the Vehicle Analysis Branch at NASA Langley Research Center, Hampton, Virginia, for launch vehicle structural subsystem weight estimation based on finite element modeling and structural analysis. The process is intended to complement traditional methods of conceptual and early preliminary structural design such as the application of empirical weight estimation or application of classical engineering design equations and criteria on one dimensional "line" models. Functions of two commercially available software codes are coupled together. Vehicle modeling and analysis are done using SDRC/I-DEAS, and structural sizing is performed with the Collier Research Corp. HyperSizer program.

Measure Guideline: Optimizing the Configuration of Flexible Duct Junction Boxes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beach, R.; Burdick, A.

2014-03-01

This measure guideline offers additional recommendations to heating, ventilation, and air conditioning (HVAC) system designers for optimizing flexible duct, constant-volume HVAC systems using junction boxes within Air Conditioning Contractors of America (ACCA) Manual D guidance (Rutkowski, H. Manual D -- Residential Duct Systems, 3rd edition, Version 1.00. Arlington, VA: Air Conditioning Contractors of America, 2009.). IBACOS used computational fluid dynamics software to explore and develop guidance to better control the airflow effects of factors that may impact pressure losses within junction boxes among various design configurations (Beach, R., Prahl, D., and Lange, R. CFD Analysis of Flexible Duct Junction Boxmore » Design. Golden, CO: National Renewable Energy Laboratory, submitted for publication 2013). These recommendations can help to ensure that a system aligns more closely with the design and the occupants' comfort expectations. Specifically, the recommendations described herein show how to configure a rectangular box with four outlets, a triangular box with three outlets, metal wyes with two outlets, and multiple configurations for more than four outlets. Designers of HVAC systems, contractors who are fabricating junction boxes on site, and anyone using the ACCA Manual D process for sizing duct runs will find this measure guideline invaluable for more accurately minimizing pressure losses when using junction boxes with flexible ducts.« less

Learning to Learn a Foreign Language. Principles of Second Language Acquisition: An Orientation for Foreign Language Teachers.

ERIC Educational Resources Information Center

Pfannkuche, Anthony; And Others

The manual designed to accompany an orientation seminar for students concerning language learning processes and strategies and the design of their program includes materials for five sessions, in three sections. The first section covers language learning and acquisition in general and contains a survey of the participants' foreign language…

A Manual for Proposal Planning and Development within the College of Education.

ERIC Educational Resources Information Center

Kussrow, Paul G.

A guide to writing effective proposals that are designed to funding for specific projects is presented. The need to clearly identify the nature of project--its design, its anticipated outcomes, and the needs which the project is addressing--is described as the crucial first step in the grantswriting process. Next, the importance of the prospectus…

Computer aided manual validation of mass spectrometry-based proteomic data.

PubMed

Curran, Timothy G; Bryson, Bryan D; Reigelhaupt, Michael; Johnson, Hannah; White, Forest M

2013-06-15

Advances in mass spectrometry-based proteomic technologies have increased the speed of analysis and the depth provided by a single analysis. Computational tools to evaluate the accuracy of peptide identifications from these high-throughput analyses have not kept pace with technological advances; currently the most common quality evaluation methods are based on statistical analysis of the likelihood of false positive identifications in large-scale data sets. While helpful, these calculations do not consider the accuracy of each identification, thus creating a precarious situation for biologists relying on the data to inform experimental design. Manual validation is the gold standard approach to confirm accuracy of database identifications, but is extremely time-intensive. To palliate the increasing time required to manually validate large proteomic datasets, we provide computer aided manual validation software (CAMV) to expedite the process. Relevant spectra are collected, catalogued, and pre-labeled, allowing users to efficiently judge the quality of each identification and summarize applicable quantitative information. CAMV significantly reduces the burden associated with manual validation and will hopefully encourage broader adoption of manual validation in mass spectrometry-based proteomics. Copyright © 2013 Elsevier Inc. All rights reserved.

Evaluating the quality of a cell counting measurement process via a dilution series experimental design.

PubMed

Sarkar, Sumona; Lund, Steven P; Vyzasatya, Ravi; Vanguri, Padmavathy; Elliott, John T; Plant, Anne L; Lin-Gibson, Sheng

2017-12-01

Cell counting measurements are critical in the research, development and manufacturing of cell-based products, yet determining cell quantity with accuracy and precision remains a challenge. Validating and evaluating a cell counting measurement process can be difficult because of the lack of appropriate reference material. Here we describe an experimental design and statistical analysis approach to evaluate the quality of a cell counting measurement process in the absence of appropriate reference materials or reference methods. The experimental design is based on a dilution series study with replicate samples and observations as well as measurement process controls. The statistical analysis evaluates the precision and proportionality of the cell counting measurement process and can be used to compare the quality of two or more counting methods. As an illustration of this approach, cell counting measurement processes (automated and manual methods) were compared for a human mesenchymal stromal cell (hMSC) preparation. For the hMSC preparation investigated, results indicated that the automated method performed better than the manual counting methods in terms of precision and proportionality. By conducting well controlled dilution series experimental designs coupled with appropriate statistical analysis, quantitative indicators of repeatability and proportionality can be calculated to provide an assessment of cell counting measurement quality. This approach does not rely on the use of a reference material or comparison to "gold standard" methods known to have limited assurance of accuracy and precision. The approach presented here may help the selection, optimization, and/or validation of a cell counting measurement process. Published by Elsevier Inc.

Orientation to Municipal Wastewater Treatment. Training Manual.

ERIC Educational Resources Information Center

Office of Water Program Operations (EPA), Cincinnati, OH. National Training and Operational Technology Center.

Introductory-level material on municipal wastewater treatment facilities and processes is presented. Course topics include sources and characteristics of municipal wastewaters; objectives of wastewater treatment; design, operation, and maintenance factors; performance testing; plant staffing; and laboratory considerations. Chapter topics include…

A Course on Operational Considerations in Wastewater Treatment Plant Design. Student Manual.

ERIC Educational Resources Information Center

Stottler, Stag and Associates, San Antonio, TX.

This manual was designed to furnish information for upgrading the design of wastewater treatment plant facilities and to serve as a resource for establishing criteria for upgrading these plants. The manual also furnishes information for modifying plant design to compensate for current organic and hydraulic overloads and/or to meet more stringent…

Weight minimization of structural components for launch in space shuttle

NASA Technical Reports Server (NTRS)

Patnaik, Surya N.; Gendy, Atef S.; Hopkins, Dale A.; Berke, Laszlo

1994-01-01

Minimizing the weight of structural components of the space station launched into orbit in a space shuttle can save cost, reduce the number of space shuttle missions, and facilitate on-orbit fabrication. Traditional manual design of such components, although feasible, cannot represent a minimum weight condition. At NASA Lewis Research Center, a design capability called CometBoards (Comparative Evaluation Test Bed of Optimization and Analysis Routines for the Design of Structures) has been developed especially for the design optimization of such flight components. Two components of the space station - a spacer structure and a support system - illustrate the capability of CometBoards. These components are designed for loads and behavior constraints that arise from a variety of flight accelerations and maneuvers. The optimization process using CometBoards reduced the weights of the components by one third from those obtained with traditional manual design. This paper presents a brief overview of the design code CometBoards and a description of the space station components, their design environments, behavior limitations, and attributes of their optimum designs.

Parametric study of two planar high power flexible solar array concepts

NASA Technical Reports Server (NTRS)

Garba, J. A.; Kudija, D. A.; Zeldin, B.; Costogue, E. N.

1978-01-01

The design parameters examined were: frequency, aspect ratio, packaging constraints, and array blanket flatness. Specific power-to-mass ratios for both solar arrays as a function of array frequency and array width were developed and plotted. Summaries of the baseline design data, developed equations, the computer program operation, plots of the parameters, and the process for using the information as a design manual are presented.

Indicating spinal joint mobilisations or manipulations in patients with neck or low-back pain: protocol of an inter-examiner reliability study among manual therapists.

PubMed

van Trijffel, Emiel; Lindeboom, Robert; Bossuyt, Patrick Mm; Schmitt, Maarten A; Lucas, Cees; Koes, Bart W; Oostendorp, Rob Ab

2014-01-01

Manual spinal joint mobilisations and manipulations are widely used treatments in patients with neck and low-back pain. Inter-examiner reliability of passive intervertebral motion assessment of the cervical and lumbar spine, perceived as important for indicating these interventions, is poor within a univariable approach. The diagnostic process as a whole in daily practice in manual therapy has a multivariable character, however, in which the use and interpretation of passive intervertebral motion assessment depend on earlier results from the diagnostic process. To date, the inter-examiner reliability among manual therapists of a multivariable diagnostic decision-making process in patients with neck or low-back pain is unknown. This study will be conducted as a repeated-measures design in which 14 pairs of manual therapists independently examine a consecutive series of a planned total of 165 patients with neck or low-back pain presenting in primary care physiotherapy. Primary outcome measure is therapists' decision about whether or not manual spinal joint mobilisations or manipulations, or both, are indicated in each patient, alone or as part of a multimodal treatment. Therapists will largely be free to conduct the full diagnostic process based on their formulated examination objectives. For each pair of therapists, 2×2 tables will be constructed and reliability for the dichotomous decision will be expressed using Cohen's kappa. In addition, observed agreement, prevalence of positive decisions, prevalence index, bias index, and specific agreement in positive and negative decisions will be calculated. Univariable logistic regression analysis of concordant decisions will be performed to explore which demographic, professional, or clinical factors contributed to reliability. This study will provide an estimate of the inter-examiner reliability among manual therapists of indicating spinal joint mobilisations or manipulations in patients with neck or low-back pain based on a multivariable diagnostic reasoning and decision-making process, as opposed to reliability of individual tests. As such, it is proposed as an initial step toward the development of an alternative approach to current classification systems and prediction rules for identifying those patients with spinal disorders that may show a better response to manual therapy which can be incorporated in randomised clinical trials. Potential methodological limitations of this study are discussed.

Indicating spinal joint mobilisations or manipulations in patients with neck or low-back pain: protocol of an inter-examiner reliability study among manual therapists

PubMed Central

2014-01-01

Background Manual spinal joint mobilisations and manipulations are widely used treatments in patients with neck and low-back pain. Inter-examiner reliability of passive intervertebral motion assessment of the cervical and lumbar spine, perceived as important for indicating these interventions, is poor within a univariable approach. The diagnostic process as a whole in daily practice in manual therapy has a multivariable character, however, in which the use and interpretation of passive intervertebral motion assessment depend on earlier results from the diagnostic process. To date, the inter-examiner reliability among manual therapists of a multivariable diagnostic decision-making process in patients with neck or low-back pain is unknown. Methods This study will be conducted as a repeated-measures design in which 14 pairs of manual therapists independently examine a consecutive series of a planned total of 165 patients with neck or low-back pain presenting in primary care physiotherapy. Primary outcome measure is therapists’ decision about whether or not manual spinal joint mobilisations or manipulations, or both, are indicated in each patient, alone or as part of a multimodal treatment. Therapists will largely be free to conduct the full diagnostic process based on their formulated examination objectives. For each pair of therapists, 2×2 tables will be constructed and reliability for the dichotomous decision will be expressed using Cohen’s kappa. In addition, observed agreement, prevalence of positive decisions, prevalence index, bias index, and specific agreement in positive and negative decisions will be calculated. Univariable logistic regression analysis of concordant decisions will be performed to explore which demographic, professional, or clinical factors contributed to reliability. Discussion This study will provide an estimate of the inter-examiner reliability among manual therapists of indicating spinal joint mobilisations or manipulations in patients with neck or low-back pain based on a multivariable diagnostic reasoning and decision-making process, as opposed to reliability of individual tests. As such, it is proposed as an initial step toward the development of an alternative approach to current classification systems and prediction rules for identifying those patients with spinal disorders that may show a better response to manual therapy which can be incorporated in randomised clinical trials. Potential methodological limitations of this study are discussed. PMID:24982754

Federal Logistics Information System. FLIS Procedures Manual Publications. Volume 15.

DTIC Science & Technology

1995-01-01

which provides for the processing of adjustments/revisions to established item identifications and characteristics in the FLIS Data Base. Item Logistics...A function in FLIS which provides for the processing of adjustments/revisions to established item identifications and characteristics in the FLIS...the materiel management functions for assigned items. Mechanization of Warehousing and Shipment Processing (MOWASP). A uniform data 6 system designed

Design Manual: Removal of Fluoride from Drinking Water Supplies by Activated Alumina

EPA Science Inventory

This document is an updated version of the Design Manual: Removal of Fluoride from Drinking Water Supplies by Activated Alumina (Rubel, 1984). The manual is an in-depth presentation of the steps required to design and operate a fluoride removal plant using activated alumina (AA)...

TOPEX Software Document Series. Volume 5; Rev. 1; TOPEX GDR Processing

NASA Technical Reports Server (NTRS)

Lee, Jeffrey; Lockwood, Dennis; Hancock, David W., III

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Geophysical Data Record (GDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Oxygen Uptake. Operational Control Tests for Wastewater Treatment Facilities. Instructor's Manual [and] Student Workbook.

ERIC Educational Resources Information Center

Wooley, John F.

Biological waste treatment in the activated sludge process is based on the ability of microorganisms to use dissolved oxygen in breaking down soluble organic substances. The oxygen uptake test is a means of measuring the respiration rate of microorganisms in this process. Designed for individuals who have completed National Pollutant Discharge…

Overlapping Numerical Cognition Impairments in Children with Chromosome 22q11.2 Deletion or Turner Syndromes

ERIC Educational Resources Information Center

Simon, T. J.; Takarae, Y.; DeBoer, T.; McDonald-McGinn, D. M.; Zackai, E. H.; Ross, J. L.

2008-01-01

Children with one of two genetic disorders (chromosome 22q11.2 deletion syndrome and Turner syndrome) as well typically developing controls, participated in three cognitive processing experiments. Two experiments were designed to test cognitive processes involved in basic aspects numerical cognition. The third was a test of simple manual motor…

Cognitive learning: a machine learning approach for automatic process characterization from design

NASA Astrophysics Data System (ADS)

Foucher, J.; Baderot, J.; Martinez, S.; Dervilllé, A.; Bernard, G.

2018-03-01

Cutting edge innovation requires accurate and fast process-control to obtain fast learning rate and industry adoption. Current tools available for such task are mainly manual and user dependent. We present in this paper cognitive learning, which is a new machine learning based technique to facilitate and to speed up complex characterization by using the design as input, providing fast training and detection time. We will focus on the machine learning framework that allows object detection, defect traceability and automatic measurement tools.

Structures manual

DOT National Transportation Integrated Search

2001-01-01

This manual was written as a guide for use by design personnel in the Vermont Agency of Transportation Structures Section. This manual covers the design responsibilities of the Section. It does not cover other functions that are a part of the Structu...

Flexible pavement rehabilitation manual. Rev., June 2001

DOT National Transportation Integrated Search

2001-06-01

This manual delineates the basic design strategies of the 1979 "Asphalt Concrete Overlay Design Manual" plus the many changes in procedures, and incorporates the use of new strategies and materials presently being used by Caltrans. Environmental conc...

Automatic Optimization of Wayfinding Design.

PubMed

Huang, Haikun; Lin, Ni-Ching; Barrett, Lorenzo; Springer, Darian; Wang, Hsueh-Cheng; Pomplun, Marc; Yu, Lap-Fai

2017-10-10

Wayfinding signs play an important role in guiding users to navigate in a virtual environment and in helping pedestrians to find their ways in a real-world architectural site. Conventionally, the wayfinding design of a virtual environment is created manually, so as the wayfinding design of a real-world architectural site. The many possible navigation scenarios, and the interplay between signs and human navigation, can make the manual design process overwhelming and non-trivial. As a result, creating a wayfinding design for a typical layout can take months to several years. In this paper, we introduce the Way to Go! approach for automatically generating a wayfinding design for a given layout. The designer simply has to specify some navigation scenarios; our approach will automatically generate an optimized wayfinding design with signs properly placed considering human agents' visibility and possibility of making navigation mistakes. We demonstrate the effectiveness of our approach in generating wayfinding designs for different layouts. We evaluate our results by comparing different wayfinding designs and show that our optimized designs can guide pedestrians to their destinations effectively. Our approach can also help the designer visualize the accessibility of a destination from different locations, and correct any "blind zone" with additional signs.

Simulated Engineer Assessment of the Communications Zone Model (SEAC) (Documentation and Users Manual)

DTIC Science & Technology

1988-06-01

became apparent. ESC originally planned to confect a dedicated model, i.e., one specifically designed to address Korea. However, it reconsidered the...s) and should not be construed as an official US Department of the Army position, policy, or decision unless so designated by other official...model based on object-oriented programming design techniques, and uses the process view of simulation to achieve its purpose. As a direct con

Arbitrary Shape Deformation in CFD Design

NASA Technical Reports Server (NTRS)

Landon, Mark; Perry, Ernest

2014-01-01

Sculptor(R) is a commercially available software tool, based on an Arbitrary Shape Design (ASD), which allows the user to perform shape optimization for computational fluid dynamics (CFD) design. The developed software tool provides important advances in the state-of-the-art of automatic CFD shape deformations and optimization software. CFD is an analysis tool that is used by engineering designers to help gain a greater understanding of the fluid flow phenomena involved in the components being designed. The next step in the engineering design process is to then modify, the design to improve the components' performance. This step has traditionally been performed manually via trial and error. Two major problems that have, in the past, hindered the development of an automated CFD shape optimization are (1) inadequate shape parameterization algorithms, and (2) inadequate algorithms for CFD grid modification. The ASD that has been developed as part of the Sculptor(R) software tool is a major advancement in solving these two issues. First, the ASD allows the CFD designer to freely create his own shape parameters, thereby eliminating the restriction of only being able to use the CAD model parameters. Then, the software performs a smooth volumetric deformation, which eliminates the extremely costly process of having to remesh the grid for every shape change (which is how this process had previously been achieved). Sculptor(R) can be used to optimize shapes for aerodynamic and structural design of spacecraft, aircraft, watercraft, ducts, and other objects that affect and are affected by flows of fluids and heat. Sculptor(R) makes it possible to perform, in real time, a design change that would manually take hours or days if remeshing were needed.

Technology of welding aluminum alloys-II

NASA Technical Reports Server (NTRS)

1978-01-01

Step-by-step procedures were developed for high integrity manual and machine welding of aluminum alloys. Detailed instructions are given for each step with tables and graphs to specify materials and dimensions. Throughout work sequence, processing procedure designates manufacturing verification points and inspection points.

Water Treatment Technology - Flouridation.

ERIC Educational Resources Information Center

Ross-Harrington, Melinda; Kincaid, G. David

One of twelve water treatment technology units, this student manual on flouridation provides instructional materials for three competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: purpose and process of flouridation, correct…

Water Treatment Technology - Chlorination.

ERIC Educational Resources Information Center

Ross-Harrington, Melinda; Kincaid, G. David

One of twelve water treatment technology units, this student manual on chlorination provides instructional materials for nine competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: purpose and process of chlorination, chlorine…

Digital Data Recording System (DDRS) operating and maintenance manual

NASA Technical Reports Server (NTRS)

Griffin, C. R.; Jones, J. I.

1980-01-01

The digital data recording system (DDRS) was designed, fabricated, tested, and delivered. This unit is the interface between the synthetic aperture radar (SAR) and the recording system. The SAR data are formatted in the DDRS for data processing on the ground.

PROCESS DESIGN MANUAL: LAND APPLICATION OF SEWAGE SLUDGE AND DOMESTIC SEPTAGE

EPA Science Inventory

Land application of sewage sludge generated by domestic sewage treatment is performed in an environmentally safe and cost–effective manner in many communities. Land application involves taking advantage of the fertilizing and soil conditioning properties of sewage sludge by sp...

PROCESS DESIGN MANUAL: SURFACE DISPOSAL OF SEWAGE SLUDGE AND DOMESTIC SEPTAGE

EPA Science Inventory

Human domestic activities generate wastewater that is piped into municipal sewer systems, underground septic tanks, or portable sanitation devices. Wastewater in municipal systems is treated before being discharged into the environment, as required under the Clean Water Act. This...

Gravel Roads: Maintenance and Design Manual

EPA Pesticide Factsheets

This manual was developed with a major emphasis on the maintenance of gravel roads, including some basic design elements. The purpose of the manual is to provide clear and helpful information for doing a better job of maintaining gravel roads.

Experimental analysis of robot-assisted needle insertion into porcine liver.

PubMed

Wang, Wendong; Shi, Yikai; Goldenberg, Andrew A; Yuan, Xiaoqing; Zhang, Peng; He, Lijing; Zou, Yingjie

2015-01-01

How to improve placement accuracy of needle insertion into liver tissue is of paramount interest to physicians. A robot-assisted system was developed to experimentally demonstrate its advantages in needle insertion surgeries. Experiments of needle insertion into porcine liver tissue were performed with conic tip needle (diameter 8 mm) and bevel tip needle (diameter 1.5 mm) in this study. Manual operation was designed to compare the performance of the presented robot-assisted system. The real-time force curves show outstanding advantages of robot-assisted operation in improving the controllability and stability of needle insertion process by comparing manual operation. The statistics of maximum force and average force further demonstrates robot-assisted operation causes less oscillation. The difference of liver deformation created by manual operation and robot-assisted operation is very low, 1 mm for average deformation and 2 mm for maximum deformation. To conclude, the presented robot-assisted system can improve placement accuracy of needle by stably control insertion process.

An Integrated RFID and Barcode Tagged Item Inventory System for Deployment at New Brunswick Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Younkin, James R; Kuhn, Michael J; Gradle, Colleen

New Brunswick Laboratory (NBL) has a numerous inventory containing thousands of plutonium and uranium certified reference materials. The current manual inventory process is well established but is a lengthy process which requires significant oversight and double checking to ensure correctness. Oak Ridge National Laboratory has worked with NBL to develop and deploy a new inventory system which utilizes handheld computers with barcode scanners and radio frequency identification (RFID) readers termed the Tagged Item Inventory System (TIIS). Certified reference materials are identified by labels which incorporate RFID tags and barcodes. The label printing process and RFID tag association process are integratedmore » into the main desktop software application. Software on the handheld computers syncs with software on designated desktop machines and the NBL inventory database to provide a seamless inventory process. This process includes: 1) identifying items to be inventoried, 2) downloading the current inventory information to the handheld computer, 3) using the handheld to read item and location labels, and 4) syncing the handheld computer with a designated desktop machine to analyze the results, print reports, etc. The security of this inventory software has been a major concern. Designated roles linked to authenticated logins are used to control access to the desktop software while password protection and badge verification are used to control access to the handheld computers. The overall system design and deployment at NBL will be presented. The performance of the system will also be discussed with respect to a small piece of the overall inventory. Future work includes performing a full inventory at NBL with the Tagged Item Inventory System and comparing performance, cost, and radiation exposures to the current manual inventory process.« less

Single Event Effects mitigation with TMRG tool

NASA Astrophysics Data System (ADS)

Kulis, S.

2017-01-01

Single Event Effects (SEE) are a major concern for integrated circuits exposed to radiation. There have been several techniques proposed to protect circuits against radiation-induced upsets. Among the others, the Triple Modular Redundancy (TMR) technique is one of the most popular. The purpose of the Triple Modular Redundancy Generator (TMRG) tool is to automatize the process of triplicating digital circuits freeing the designer from introducing the TMR code manually at the implementation stage. It helps to ensure that triplicated logic is maintained through the design process. Finally, the tool streamlines the process of introducing SEE in gate level simulations for final verification.

77 FR 28455 - National Standards for Traffic Control Devices; the Manual on Uniform Traffic Control Devices for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

... Options for design and applications of traffic control devices, this Manual should not be considered a... application of traffic control devices, as well as in the location and design of roads and streets that the..., while this Manual provides Standards, Guidance, and Options for design and applications of traffic...

Getting Things Done. A Learning Package for Process Skills. An Occasional Paper.

ERIC Educational Resources Information Center

Taylor, Max

This manual is designed to help teachers and tutors implement a 4-day modular course in the skills and processes necessary to get things done. The aims and content of the course are described. A course summary is provided along with a model course program that includes parallel lists of objectives, suggested learning activities and text materials,…

WFF TOPEX Software Documentation Altimeter Instrument File (AIF) Processing, October 1998. Volume 3

NASA Technical Reports Server (NTRS)

Lee, Jeffrey; Lockwood, Dennis

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Sensor Data Record (SDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

Identification of potential neuromotor mechanisms of manual therapy in patients with musculoskeletal disablement: rationale and description of a clinical trial.

PubMed

Fisher, Beth E; Davenport, Todd E; Kulig, Kornelia; Wu, Allan D

2009-05-21

Many health care practitioners use a variety of hands-on treatments to improve symptoms and disablement in patients with musculoskeletal pathology.Research to date indirectly suggests a potentially broad effect of manual therapy on the neuromotor processing of functional behavior within the supraspinal central nervous system (CNS) in a manner that may be independent of modification at the level of local spinal circuits. However, the effect of treatment speed, as well as the specific mechanism and locus of CNS changes, remain unclear. We developed a placebo-controlled, randomized study to test the hypothesis that manual therapy procedures directed to the talocrural joint in individuals with post-acute ankle sprain induce a change in corticospinal excitability that is relevant to improve the performance of lower extremity functional behavior. This study is designed to identify potential neuromotor changes associated with manual therapy procedures directed to the appendicular skeleton, compare the relative effect of treatment speed on potential neuromotor effects of manual therapy procedures, and determine the behavioral relevance of potential neuromotor effects of manual therapy procedures. http://www.clinicaltrials.gov identifier NCT00847769.

PRODUCTION OF HEAVY WATER SAVANNAH RIVER AND DANA PLANTS. Technical Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bebbington, W.P.; Thayer, V.R. eds.; Proctor, J.F. comp.

1959-07-01

A summary is presented of the basic technical iniormation that pertains to processes that are used at the Dana and Savannah River Plants for the production of heavy water. The manual is intended primarily for plant operating and technical personnel and was prepared to supplement and provide technical support for detailed operating procedures. Introductory sections contain some background information on the history, uses, available processes, and analytical procedures for heavy water. They also include a general comparison of the design and laserformance of the two plants and an analysis of their differences. The technology of the heavy water separation processesmore » used, namely hydrogen sulfide exchange, distillation of water, and electrolysis is discussed in detail. The manufacture and storage of hydrogen sulfide gas and the process water treatment facilities are also discussed. (auth)« less

Irrigation Training Manual. Planning, Design, Operation, and Management of Small-Scale Irrigation Systems [and] Irrigation Reference Manual. A Technical Reference to Be Used with the Peace Corps Irrigation Training Manual T0076 in the Selection, Planning, Design, Operation, and Management of Small-Scale Irrigation Systems.

ERIC Educational Resources Information Center

Salazar, LeRoy; And Others

This resource for trainers involved in irrigated agriculture training for Peace Corps volunteers consists of two parts: irrigation training manual and irrigation reference manual. The complete course should fully prepare volunteers serving as irrigation, specialists to plan, implement, evaluate and manage small-scale irrigation projects in arid,…

Design and evaluation of brushless electrical generators

NASA Technical Reports Server (NTRS)

Collins, F. A.; Ellis, J. N.

1970-01-01

Ten design manuals assembled and nine computer programs are developed for evaluation of proposed designs of brushless rotating electrical generators. Design manual package provides all information required for generator design, and computer programs permit calculation of performance of specific designs including effects of materials.

Indexing. ERIC Processing Manual, Section VII.

ERIC Educational Resources Information Center

Houston, Jim, Ed.

Rules and guidelines are provided for subject indexing in the ERIC system. The principle of "subject access" is discussed with particular reference to "coordinate indexing," which involves designating subject content by unit terms (or tags) that may be put together or "coordinated" for subsequent retrieval. The nature…

Instructional System Development.

ERIC Educational Resources Information Center

Department of the Air Force, Washington, DC.

The manual presents a technology of instructional design and a model for developing and conducting efficient and cost effective Air Force instructional systems. Chapter 1 provides an overview of Instructional System Development (ISD). Chapters 2-6 each focus on a step of the process: analysis of system requirements; definition of…

Local data will help Michigan make better safety investment decisions : research spotlight.

DOT National Transportation Integrated Search

2016-07-01

MDOT staff are aiming to use data-driven processes and practices from the AASHTO Highway Safety Manual (HSM) to estimate the safety impacts of various crash reduction strategies and highway design alternatives, such as adding a median or varying the ...

Guideline for Software Documentation Management.

ERIC Educational Resources Information Center

National Bureau of Standards (DOC), Washington, DC.

Designed as a basic reference for federal personnel concerned with the development, maintenance, enhancement, control, and management of computer-based systems, this manual provides a general overview of the software development process and software documentation issues so that managers can assess their own documentation requirements. Reference is…

Optimisation study of a vehicle bumper subsystem with fuzzy parameters

NASA Astrophysics Data System (ADS)

Farkas, L.; Moens, D.; Donders, S.; Vandepitte, D.

2012-10-01

This paper deals with the design and optimisation for crashworthiness of a vehicle bumper subsystem, which is a key scenario for vehicle component design. The automotive manufacturers and suppliers have to find optimal design solutions for such subsystems that comply with the conflicting requirements of the regulatory bodies regarding functional performance (safety and repairability) and regarding the environmental impact (mass). For the bumper design challenge, an integrated methodology for multi-attribute design engineering of mechanical structures is set up. The integrated process captures the various tasks that are usually performed manually, this way facilitating the automated design iterations for optimisation. Subsequently, an optimisation process is applied that takes the effect of parametric uncertainties into account, such that the system level of failure possibility is acceptable. This optimisation process is referred to as possibility-based design optimisation and integrates the fuzzy FE analysis applied for the uncertainty treatment in crash simulations. This process is the counterpart of the reliability-based design optimisation used in a probabilistic context with statistically defined parameters (variabilities).

MANUAL: BIOVENTING PRINCIPLES AND PRACTICE VOLUME II. BIOVENTING DESIGN

EPA Science Inventory

The results from bioventing research and development efforts and from the pilot-scale bioventing systems have been used to produce this two-volume manual. Although this design manual has been written based on extensive experience with petroleum hydrocarbons (and thus, many exampl...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baumgardt, D.R.; Carter, S.; Maxson, M.

The objective of this project is to design and develop an Intelligent Event Identification System, or ISEIS, which will be a prototype for routine event identification of small explosions and earthquakes and to serve as a tool for discrimination research. The first part of this study gives an overview of the system design and the results of a preliminary evaluation of the system on events in Scandinavia and the Soviet Union. The system was designed to be highly modular to allow the easy incorporation of new discriminants and/or discrimination processes. Because the main objective of the system is the identificationmore » of small events, most of the initial ISEIS prototype discriminants utilize regional seismic data recorded by the regional arrays, NORESS and ARCESS. However, ISEIS can easily process other regional array data (e.g., from GERESS and FINESA), as well as data from three-component single stations, as more of this data becomes available. The second part of this study is entitled Intelligent Event Identification System: User's Manual, and gives a detailed description of all the processing interfaces of ISEIS. The third part of this study is entitled Intelligent Event Identification System: Software Maintenance Manual, which describes the ISEIS software from the programmer's perspective and provides information for maintenance and modification of the software modules in the system.« less

User manual for SPLASH (Single Panel Lamp and Shroud Helper).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larsen, Marvin Elwood

2006-02-01

The radiant heat test facility develops test sets providing well-characterized thermal environments, often representing fires. Many of the components and procedures have become standardized to such an extent that the development of a specialized design tool to determine optimal configurations for radiant heat experiments was appropriate. SPLASH (Single Panel Lamp and Shroud Helper) is that tool. SPLASH is implemented as a user-friendly, Windows-based program that allows a designer to describe a test setup in terms of parameters such as number of lamps, power, position, and separation distance. This document is a user manual for that software. Any incidental descriptions ofmore » theory are only for the purpose of defining the model inputs. The theory for the underlying model is described in SAND2005-2947 (Ref. [1]). SPLASH provides a graphical user interface to define lamp panel and shroud designs parametrically, solves the resulting radiation enclosure problem for up to 2500 surfaces, and provides post-processing to facilitate understanding and documentation of analyzed designs.« less

Measure Guideline: Optimizing the Configuration of Flexible Duct Junction Boxes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beach, R.; Burdick, A.

2014-03-01

This measure guideline offers additional recommendations to heating, ventilation, and air conditioning (HVAC) system designers for optimizing flexible duct, constant-volume HVAC systems using junction boxes within Air Conditioning Contractors of America (ACCA) Manual D guidance. IBACOS used computational fluid dynamics software to explore and develop guidance to better control the airflow effects of factors that may impact pressure losses within junction boxes among various design configurations. These recommendations can help to ensure that a system aligns more closely with the design and the occupants' comfort expectations. Specifically, the recommendations described herein show how to configure a rectangular box with fourmore » outlets, a triangular box with three outlets, metal wyes with two outlets, and multiple configurations for more than four outlets. Designers of HVAC systems, contractors who are fabricating junction boxes on site, and anyone using the ACCA Manual D process for sizing duct runs will find this measure guideline invaluable for more accurately minimizing pressure losses when using junction boxes with flexible ducts.« less

Data analysis software for the autoradiographic enhancement process. Volumes 1, 2, and 3, and appendix

NASA Technical Reports Server (NTRS)

Singh, S. P.

1979-01-01

The computer software developed to set up a method for Wiener spectrum analysis of photographic films is presented. This method is used for the quantitative analysis of the autoradiographic enhancement process. The software requirements and design for the autoradiographic enhancement process are given along with the program listings and the users manual. A software description and program listings modification of the data analysis software are included.

Carryover effects of highly automated convoy driving on subsequent manual driving performance.

PubMed

Skottke, Eva-Maria; Debus, Günter; Wang, Lei; Huestegge, Lynn

2014-11-01

In the present study, we tested to what extent highly automated convoy driving involving small spacing ("platooning") may affect time headway (THW) and standard deviation of lateral position (SDLP) during subsequent manual driving. Although many previous studies have reported beneficial effects of automated driving, some research has also highlighted potential drawbacks, such as increased speed and reduced THW during the activation of semiautomated driving systems. Here, we rather focused on the question of whether switching from automated to manual driving may produce unwanted carryover effects on safety-relevant driving performance. We utilized a pre-post simulator design to measure THW and SDLP after highly automated driving and compared the data with those for a control group (manual driving throughout). Our data revealed that THW was reduced and SDLP increased after leaving the automation mode. A closer inspection of the data suggested that specifically the effect on THW is likely due to sensory and/or cognitive adaptation processes. Behavioral adaptation effects need to be taken into account in future implementations of automated convoy systems. Potential application areas of this research comprise automated freight traffic (truck convoys) and the design of driver assistance systems in general. Potential countermeasures against following at short distance as behavioral adaptation should be considered.

Knowledge management in the engineering design environment

NASA Technical Reports Server (NTRS)

Briggs, Hugh C.

2006-01-01

The Aerospace and Defense industry is experiencing an increasing loss of knowledge through workforce reductions associated with business consolidation and retirement of senior personnel. Significant effort is being placed on process definition as part of ISO certification and, more recently, CMMI certification. The process knowledge in these efforts represents the simplest of engineering knowledge and many organizations are trying to get senior engineers to write more significant guidelines, best practices and design manuals. A new generation of design software, known as Product Lifecycle Management systems, has many mechanisms for capturing and deploying a wider variety of engineering knowledge than simple process definitions. These hold the promise of significant improvements through reuse of prior designs, codification of practices in workflows, and placement of detailed how-tos at the point of application.

Development of a MASH TL-2 guardrail-to-bridge rail transition compatible with 31-inch guardrail.

DOT National Transportation Integrated Search

2011-12-01

The TxDOT Design Division is in the process of developing new guardrail standards that comply with the AASHTO Manual for Assessing Safety Hardware (MASH). The new guardrail system will provide increased capacity and improved impact performance relati...

40 CFR 240.210-1 - Requirement.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Requirement. 240.210-1 Section 240.210... THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures § 240.210-1 Requirement... the design requirements. An operations manual describing the various tasks to be performed, operating...

40 CFR 240.210-1 - Requirement.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Requirement. 240.210-1 Section 240.210... THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures § 240.210-1 Requirement... the design requirements. An operations manual describing the various tasks to be performed, operating...

40 CFR 240.210-1 - Requirement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Requirement. 240.210-1 Section 240.210... THE THERMAL PROCESSING OF SOLID WASTES Requirements and Recommended Procedures § 240.210-1 Requirement... the design requirements. An operations manual describing the various tasks to be performed, operating...

Greener Approaches to Undergraduate Chemistry Experiments.

ERIC Educational Resources Information Center

Kirchhoff, Mary, Ed.; Ryan, Mary Ann, Ed.

This laboratory manual introduces the idea of Green Chemistry, which is the design of chemical products and processes that reduce or eliminate the use and generation of hazardous substances. Instructional samples are included to help teachers integrate green chemistry into the college chemistry curriculum. Each laboratory includes: (1) a…

Manual for Public School Facilities Fire Prevention and Fire Inspections. [Revised].

ERIC Educational Resources Information Center

New York State Education Dept., Albany.

Designed to provide instruction for New York State inspectors and school administrators completing the annual "Fire Safety Report," this document provides information regarding: (1) the Regulation and Code requirements; (2) inspection and enforcement processes; (3) disputes and procedures for appeal; and (4) financial considerations…

Procedural Due Process in Indian Education. Scripts for a Two-Part Filmstrip/Audio Tape Program. Curriculum Bulletin 18.03.

ERIC Educational Resources Information Center

Streiff, Paul R.

In 1974 new sections added to the Code of Federal Regulations and the Indian Affairs Field Manual required the establishment of programs of student rights and responsibilities and due process procedures in schools operated or funded by the Bureau of Indian Affairs. This two-part filmstrip and audio tape program is designed to assist educators and…

System design package for solar heating and cooling site data acquisition subsystem

NASA Technical Reports Server (NTRS)

1978-01-01

The Site Data Acquisition Subsystem (SDAS) designed to collect data from sensors located on residential or commercial buildings using a solar heating and/or cooling system is described. It takes the data obtained from sensors located on the solar system, processes the data into suitable format, stores the data for a period of time, and provides the capability for either telephone retrieval by the central data processing system or manual retrieval of the data for transfer to a central site. The SDAS is also designed so that it will not degrade the operation of the solar heating/cooling system which it is monitoring.

Sustainable design guidelines to support the Washington State ferries terminal design manual : stormwater and material issues.

DOT National Transportation Integrated Search

2011-08-01

In an effort to assist the developers of the terminal design manual in potentially addressing : sustainable design issues, the overall goal is to produce Sustainable Design Guidelines that : will specifically address the unique needs and requirements...

Strategies for risk assessment and control in welding: challenges for developing countries.

PubMed

Hewitt, P J

2001-06-01

Metal arc welding ranges from primitive (manual) to increasingly complex automated welding processes. Welding occupies 1% of the labour force in some industrialised countries and increasing knowledge of health risks, necessitating improved assessment strategies and controls have been identified by the International Institute of Welding (IIW), ILO, WHO and other authoritative bodies. Challenges for developing countries need to be addressed. For small scale production and repair work, predominantly by manual metal arc on mild steel, the focus in developing economies has correctly been on control of obvious physical and acute health affects. Development introduces more sophisticated processes and hazards. Work pieces of stainless steel and consumables with chromium, nickel and manganese constituents are used with increasingly complex semi-manual or automated systems involving variety of fluxes or gasses. Uncritical adoption of new welding technologies by developing countries potentiates future health problems. Control should be integral at the design stage, otherwise substantive detriments and later costs can ensue. Developing countries need particular guidance on selection of the optimised welding consumables and processes to minimise such detriments. The role of the IIW and the MFRU are described. Applications of occupational hygiene principals of prevention and control of welding fume at source by process modification are presented.

Community-Based Prevention Specialist. Trainer Manual.

ERIC Educational Resources Information Center

University Research Corp., Bethesda, MD.

This trainer manual is designed to assist facilitators in the design of entry-level courses and programs for substance abuse prevention specialists. The manual initially concentrates on a basic, generic approach to community work, and introduces the knowledge and skills needed to implement substance abuse prevention programs by using the community…

Product Manuals: A Consumer Perspective.

ERIC Educational Resources Information Center

Showers, Linda S.; And Others

1993-01-01

Qualitative analysis of insights from consumer focus groups on product manual usage reveals consumer perceptions and preferences regarding manual and safety message format. Results can be used to improve manual design and content. (JOW)

Farallones Scrapbook; A Momento and Manual of Our Apprenticeship in Making Places and Changing Spaces in Schools at Home and Within Ourselves.

ERIC Educational Resources Information Center

Farallones Designs, Pt. Reyes Station, CA.

The Farallones Designs group is dedicated to "helping ourselves and other people create more human places for living, learning, working, playing,...to returning architecture to its roots in each person,...to creating access to the design process and tools." The Scrapbook is a "partial record of eighteen months together helping kids and teachers to…

Caltrans : highway design manual

DOT National Transportation Integrated Search

2008-07-01

The Highway Design Manual establishes uniform policies and procedures to carry out the highway design functions of the California Department of Transportation (Caltrans). The policies established herein are for the information and guidance of the off...

Fastener Design Manual

NASA Technical Reports Server (NTRS)

Barrett, Richard T.

1990-01-01

This manual was written for design engineers to enable them to choose appropriate fasteners for their designs. Subject matter includes fastener material selection, platings, lubricants, corrosion, locking methods, washers, inserts, thread types and classes, fatigue loading, and fastener torque. A section on design criteria covers the derivation of torque formulas, loads on a fastener group, combining simultaneous shear and tension loads, pullout load for tapped holes, grip length, head styles, and fastener strengths. The second half of this manual presents general guidelines and selection criteria for rivets and lockbolts.

Klusters, NeuroScope, NDManager: a free software suite for neurophysiological data processing and visualization.

PubMed

Hazan, Lynn; Zugaro, Michaël; Buzsáki, György

2006-09-15

Recent technological advances now allow for simultaneous recording of large populations of anatomically distributed neurons in behaving animals. The free software package described here was designed to help neurophysiologists process and view recorded data in an efficient and user-friendly manner. This package consists of several well-integrated applications, including NeuroScope (http://neuroscope.sourceforce.net), an advanced viewer for electrophysiological and behavioral data with limited editing capabilities, Klusters (http://klusters.sourceforge.net), a graphical cluster cutting application for manual and semi-automatic spike sorting, NDManager (GPL,see http://www.gnu.org/licenses/gpl.html), an experimental parameter and data processing manager. All of these programs are distributed under the GNU General Public License (GPL, see ), which gives its users legal permission to copy, distribute and/or modify the software. Also included are extensive user manuals and sample data, as well as source code and documentation.

Salary Management System for Small and Medium-sized Enterprises

NASA Astrophysics Data System (ADS)

Hao, Zhang; Guangli, Xu; Yuhuan, Zhang; Yilong, Lei

Small and Medium-sized Enterprises (SMEs) in the process of wage entry, calculation, the total number are needed to be done manually in the past, the data volume is quite large, processing speed is low, and it is easy to make error, which is resulting in low efficiency. The main purpose of writing this paper is to present the basis of salary management system, establish a scientific database, the computer payroll system, using the computer instead of a lot of past manual work in order to reduce duplication of staff labor, it will improve working efficiency.This system combines the actual needs of SMEs, through in-depth study and practice of the C/S mode, PowerBuilder10.0 development tools, databases and SQL language, Completed a payroll system needs analysis, database design, application design and development work. Wages, departments, units and personnel database file are included in this system, and have data management, department management, personnel management and other functions, through the control and management of the database query, add, delete, modify, and other functions can be realized. This system is reasonable design, a more complete function, stable operation has been tested to meet the basic needs of the work.

The NMCSSC Quick-Reacting General War Gaming System (QUICK). Analytical Manual. Volume I - Data Base Preparation. Change

DTIC Science & Technology

1972-02-21

is a two-sided strategic nuclear exchange war gaming system. It is designed co assist the military planner in examining various facets of strategic...substantial, the data base preparation process is designed to provide an efficient means of assembling, maintaining, and organizing an input data base to... designed to assist in the study of &’trategic conflicts involving a large-scale Pexchange of nuclear weapons. The system is structured into five

Public Fire Education. First Edition. IFSTA 606.

ERIC Educational Resources Information Center

Laughlin, Jerry W., Ed.; And Others

This manual was developed to give the firefighter basic knowledge concerning the problem of reaching the public with an educational program. Focusing on fire education planning, the first of seven chapters presents a five-step planning process that involves identification, selection, design, implementation, and evaluation. Chapter 2 presents a…

Designing the Horizons of Your Small Business.

ERIC Educational Resources Information Center

Helgemo, Robert R.

This manual outlines the planning process for developing a feasibility study for a small business. The material is composed of three parts: the planning documents filled out for an imaginary campground; a business plan summarized from the planning documents; and blank planning documents with introductions and instructions. The documents can be…

Training Mentors as Educational Advisors for Adult Learners. Process Manual.

ERIC Educational Resources Information Center

Singer, Elizabeth W.

Materials used by the director of a project designed to assist key personnel in businesses, industries, and agencies with the educational counseling of their employees are presented. The objectives of the project, "Training Mentors as Educational Advisors of Adult Learners," were to: (1) provide two training sessions in educational…

Training Program Development for Criminal Justice Agencies.

ERIC Educational Resources Information Center

Cheesebro, Deborah; Skinner, Gilbert H.

This manual is designed to assist in the development of a criminal justice agency training program. The first chapter is a discussion of various learning principles (motivation, practice, reinforcement, and learning transfer) and how they may help the trainer select instructional strategies later in the process. Administration, trainer, and…

Joining Forces. A Team Approach to Secondary School Development.

ERIC Educational Resources Information Center

Miller, Rima; Corcoran, Thomas B.

This manual is designed to guide the implementation of the Joining Forces Program, a comprehensive improvement process for secondary schools. Implementation of the program requires the cooperative effort of the local school district, state and local education associations, and the administration and staff of participating schools. Joining Forces…

School Improvement Processes in Career Education.

ERIC Educational Resources Information Center

Smey, Barbara A.

This manual is designed to review those topics which should be considered when initiating a school improvement effort in career education. These materials, representing a one-day workshop, consist of seven activities. Topics covered in the activities are an overview of the workshop, work flow and a work-flow diagram, needs assessment, career…

Diseno Sistematico de Proyectos: Manual para Voluntarios (Systematic Project Design: A Handbook for Volunteers). Appropriate Technologies for Development. Fourth Edition. Reprint R-44B.

ERIC Educational Resources Information Center

Peace Corps, Washington, DC. Information Collection and Exchange Div.

This manual, the Spanish translation of a separately available English handbook on program design, is intended to assist volunteers and staff of volunteer organizations in the systematic design of projects in various health, community, and social service areas. The first section of the manual is a guidebook that addresses such aspects of the…

Multimodal assessment of visual attention using the Bethesda Eye & Attention Measure (BEAM).

PubMed

Ettenhofer, Mark L; Hershaw, Jamie N; Barry, David M

2016-01-01

Computerized cognitive tests measuring manual response time (RT) and errors are often used in the assessment of visual attention. Evidence suggests that saccadic RT and errors may also provide valuable information about attention. This study was conducted to examine a novel approach to multimodal assessment of visual attention incorporating concurrent measurements of saccadic eye movements and manual responses. A computerized cognitive task, the Bethesda Eye & Attention Measure (BEAM) v.34, was designed to evaluate key attention networks through concurrent measurement of saccadic and manual RT and inhibition errors. Results from a community sample of n = 54 adults were analyzed to examine effects of BEAM attention cues on manual and saccadic RT and inhibition errors, internal reliability of BEAM metrics, relationships between parallel saccadic and manual metrics, and relationships of BEAM metrics to demographic characteristics. Effects of BEAM attention cues (alerting, orienting, interference, gap, and no-go signals) were consistent with previous literature examining key attention processes. However, corresponding saccadic and manual measurements were weakly related to each other, and only manual measurements were related to estimated verbal intelligence or years of education. This study provides preliminary support for the feasibility of multimodal assessment of visual attention using the BEAM. Results suggest that BEAM saccadic and manual metrics provide divergent measurements. Additional research will be needed to obtain comprehensive normative data, to cross-validate BEAM measurements with other indicators of neural and cognitive function, and to evaluate the utility of these metrics within clinical populations of interest.

Automated CD-SEM recipe creation technology for mass production using CAD data

NASA Astrophysics Data System (ADS)

Kawahara, Toshikazu; Yoshida, Masamichi; Tanaka, Masashi; Ido, Sanyu; Nakano, Hiroyuki; Adachi, Naokaka; Abe, Yuichi; Nagatomo, Wataru

2011-03-01

Critical Dimension Scanning Electron Microscope (CD-SEM) recipe creation needs sample preparation necessary for matching pattern registration, and recipe creation on CD-SEM using the sample, which hinders the reduction in test production cost and time in semiconductor manufacturing factories. From the perspective of cost reduction and improvement of the test production efficiency, automated CD-SEM recipe creation without the sample preparation and the manual operation has been important in the production lines. For the automated CD-SEM recipe creation, we have introduced RecipeDirector (RD) that enables the recipe creation by using Computer-Aided Design (CAD) data and text data that includes measurement information. We have developed a system that automatically creates the CAD data and the text data necessary for the recipe creation on RD; and, for the elimination of the manual operation, we have enhanced RD so that all measurement information can be specified in the text data. As a result, we have established an automated CD-SEM recipe creation system without the sample preparation and the manual operation. For the introduction of the CD-SEM recipe creation system using RD to the production lines, the accuracy of the pattern matching was an issue. The shape of design templates for the matching created from the CAD data was different from that of SEM images in vision. Thus, a development of robust pattern matching algorithm that considers the shape difference was needed. The addition of image processing of the templates for the matching and shape processing of the CAD patterns in the lower layer has enabled the robust pattern matching. This paper describes the automated CD-SEM recipe creation technology for the production lines without the sample preparation and the manual operation using RD applied in Sony Semiconductor Kyusyu Corporation Kumamoto Technology Center (SCK Corporation Kumamoto TEC).

Radio and Television Repairer Fundamentals. Student's Manual.

ERIC Educational Resources Information Center

Maul, Chuck

This self-contained student manual on fundamentals of radio and television repair is designed to help trade and industrial students relate work experience on the job to information studied at school. Designed for individualized instruction under the supervision of a coordinator or instructor, the manual has 9 sections, each containing 2 to 10…

Police Allocation Manual: Determination of the Number and Allocation of Personnel for Patrol Services for State Police Departments (Special Version, September 1991)

DOT National Transportation Integrated Search

1993-04-01

The Police Allocation Manual (PAM) is designed to be used by state police : agencies, or divisions within those agencies, whose mission includes the : delivery of police traffic services. The Manual is designed to help such : agencies address two key...

Economic Evaluation of Building Design, Construction, Operation and Maintenance. Instructor's Manual.

ERIC Educational Resources Information Center

Ruegg, Rosalie T.; Marshall, Harold E.

This instructor's manual describes each section of a 3-day technical seminar on how to measure the economic impact of alternative designs, systems, and operation and maintenance strategies in federal buildings. The manual was prepared to help instructors of the General Services Administration conduct technically sound and comprehensive seminars.…

Value Engineering. Technical Manual. School Facilities Development Procedures Manual.

ERIC Educational Resources Information Center

Washington Office of the State Superintendent of Public Instruction, Olympia.

Value Engineering (VE) is a cost-optimizing technique used to analyze design quality and cost-effectiveness. The application of VE procedures to the design and construction of school facilities has been adopted by the state of Washington. This technical manual provides guidance in developing the scope and applicability of VE to school projects; in…

Guidelines for Serving Students with Limited English Proficiency. Administrative Manual.

ERIC Educational Resources Information Center

Biagini, Joyce; And Others

A revision of a manual first produced in 1980, this guide is designed to help local school districts in Minnesota meet the educational needs of their limited-English-proficient (LEP) students in academically and administratively expedient ways. The chapters in the manual, which correspond to topics pertinent to designing and maintaining an LEP…

Modular Systems Of Fixation And Position Jigs In The Production Process For Products And Systems

NASA Astrophysics Data System (ADS)

Babík, Ondrej; Šajgalík, Michal; Zaušková, Lucia; Czán, Andrej

2015-12-01

The project deals with design and implementation of adjustment onto mounting tables in the automotive industry. Manual control system of the jigs is replaced by a pneumatic system. Advantages of the pneumatic system are eliminating service side-time, improving work flow and increasing safety and ergonomics at work. Thanks to higher effectivity of the work process, manpower can be used in other work positions.

Apparel Research Network (ARN); Apparel Order Processing Module (AOPM): Field User Manual, Version 1

DTIC Science & Technology

1997-09-30

changes. Cancel Button Closes the Site Information Screen, abandoning changes. APPAREL ORDER PROCESSING MODULE FIELD USER MANUAL Ordering Official...on the Ordering Official Information Screen. APPAREL ORDER PROCESSING MODULE FIELD USER MANUAL Ordering Official Information Screen (Jjj

Integrated Composite Analyzer (ICAN): Users and programmers manual

NASA Technical Reports Server (NTRS)

Murthy, P. L. N.; Chamis, C. C.

1986-01-01

The use of and relevant equations programmed in a computer code designed to carry out a comprehensive linear analysis of multilayered fiber composites is described. The analysis contains the essential features required to effectively design structural components made from fiber composites. The inputs to the code are constituent material properties, factors reflecting the fabrication process, and composite geometry. The code performs micromechanics, macromechanics, and laminate analysis, including the hygrothermal response of fiber composites. The code outputs are the various ply and composite properties, composite structural response, and composite stress analysis results with details on failure. The code is in Fortran IV and can be used efficiently as a package in complex structural analysis programs. The input-output format is described extensively through the use of a sample problem. The program listing is also included. The code manual consists of two parts.

DESIGN MANUAL: DEWATERING MUNICIPAL WASTEWATER SLUDGES

EPA Science Inventory

This manual discusses the many factors involved in selecting and designing dewatering equipment for organic sludges produced during primary and secondary municipal wastewater treatment. ive-step approach is outlined for the selection and design of the dewatering equipment for eit...

Development of an Improvised Manual Airbrush Compressor for Students Artist in Nigeria

ERIC Educational Resources Information Center

Kwasu, Isaac Ali

2015-01-01

The study was set to develop and pilot a manual airbrush compressor for artists use in art and design. In the design of the manual airbrush, three established technological systems were adopted which includes, compressor, pressure tank and bicycle operating system. The idea was skillfully translated into a working drawing and developed into a…

Utah Publications Depository Program. Manual of Guidelines for State Agencies, Revised [and] Manual of Guidelines for Depository Libraries, Revised.

ERIC Educational Resources Information Center

Utah State Library, Salt Lake City.

Two manuals provide guidelines for users of the Utah Publications Depository Program. The first, "Guidelines for State Agencies," is designed to assist agencies in complying with the depository law. The program is designed to collect Utah State Governmental publications and to make them available through libraries. State publications…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The Best Practices Manual was written as a part of the promotional effort for EnergySmart Schools, provided by the US Department of Energy, to educate school districts around the country about energy efficiency and renewable energy. Written specifically for architects and engineers, The Best Practices Manual is designed to help those who are responsible for designing or retrofitting schools, as well as their project managers. This manual will help design staff make informed decisions about energy and environmental issues important to the school systems and communities.

Water Treatment Pilot Plant Design Manual: Low Flow Conventional/Direct Filtration Water Treatment Plant for Drinking Water Treatment Studies

EPA Science Inventory

This manual highlights the project constraints and concerns, and includes detailed design calculations and system schematics. The plant is based on engineering design principles and practices, previous pilot plant design experiences, and professional experiences and may serve as ...

Designed tools for analysis of lithography patterns and nanostructures

NASA Astrophysics Data System (ADS)

Dervillé, Alexandre; Baderot, Julien; Bernard, Guilhem; Foucher, Johann; Grönqvist, Hanna; Labrosse, Aurélien; Martinez, Sergio; Zimmermann, Yann

2017-03-01

We introduce a set of designed tools for the analysis of lithography patterns and nano structures. The classical metrological analysis of these objects has the drawbacks of being time consuming, requiring manual tuning and lacking robustness and user friendliness. With the goal of improving the current situation, we propose new image processing tools at different levels: semi automatic, automatic and machine-learning enhanced tools. The complete set of tools has been integrated into a software platform designed to transform the lab into a virtual fab. The underlying idea is to master nano processes at the research and development level by accelerating the access to knowledge and hence speed up the implementation in product lines.

Subsystem design package for Mod 2 site data acquisition system: Solar heating and cooling

NASA Technical Reports Server (NTRS)

1977-01-01

The Mod II Site Data Acquisition Subsystem (SDAS) is designed to collect data from sensors located on residential or commercial buildings using a solar heating and/or cooling system. The SDAS takes the data obtained from sensors located on the solar heating and/or cooling system, processes the data into a suitable format, stores the data for a period of time, and provides the capability for both telephone retrieval by the Central Data Processing System (CDPS) and manual retrieval of the data for transfer to the central site. The unit is designed so it will not degrade the operation of the solar heating/cooling system which it is monitoring.

Pennsylvania Blue Shield Job Linked Skills Program. Teacher's Manual [and] Technical Manual.

ERIC Educational Resources Information Center

Pennsylvania State Univ., University Park. Inst. for the Study of Adult Literacy.

Two closely related publications from the same project, a Teacher's Manual" and a "Technical Manual", are combined here. These manuals are intended to accompany a work force literacy course designed to meet the basic skills needs of midliterate adults employed or preparing for employment in the health insurance industry.…

Design and performance of a large vocabulary discrete word recognition system. Volume 1: Technical report. [real time computer technique for voice data processing

NASA Technical Reports Server (NTRS)

1973-01-01

The development, construction, and test of a 100-word vocabulary near real time word recognition system are reported. Included are reasonable replacement of any one or all 100 words in the vocabulary, rapid learning of a new speaker, storage and retrieval of training sets, verbal or manual single word deletion, continuous adaptation with verbal or manual error correction, on-line verification of vocabulary as spoken, system modes selectable via verification display keyboard, relationship of classified word to neighboring word, and a versatile input/output interface to accommodate a variety of applications.

SPC-Prep 1. Participant's Manual. Workplace Education. Project ALERT.

ERIC Educational Resources Information Center

Ruetz, Nancy

This companion document to the instructor's guide for a course designed to prepare employees for statistical process control (SPC) training given at their workplace by refreshing math skills and building the concepts and vocabulary necessary to understand SPC in manufacturing environments. SPC-Prep 1 addresses the math skills necessary to perform…

Copy-Editing: The Cambridge Handbook.

ERIC Educational Resources Information Center

Butcher, Judith

This handbook is designed as a reference manual for copy editors who prepare typescript for printing. It deals with the following topics: the copy editor's function; the work to be done at each stage in the production process; some difficult points of spelling, capitalization, and other features collectively known as "house style"; the parts of a…

Observing and Producing Sounds, Elementary School Science, Level Four, Teaching Manual.

ERIC Educational Resources Information Center

Hale, Helen E.

This pilot teaching unit is one of a series developed for use in elementary school science programs. This unit is designed to help children discover specific concepts which relate to sound, such as volume, pitch, and echo. The student activities employ important scientific processes, such as observation, communication, inference, classification,…

A Resource Manual For Implementing Bilingual Education Programs.

ERIC Educational Resources Information Center

Good Neighbor Commission of Texas, Austin.

Bilingualism has occurred for many years wherever countries with different languages border each other. Recently, bilingual education has begun to have a position in the formal education process of schools throughout the United States with students whose first language is not English. This bulletin, designed with the hope that it can assist school…

Improving Accommodations Outcomes: Monitoring Instructional and Assessment Accommodations for Students with Disabilities

ERIC Educational Resources Information Center

Christensen, Laurene L.; Thurlow, Martha L.; Wang, Ting

2009-01-01

This document presents a five-step process for schools, districts, and states to use in monitoring accommodations for instruction and assessment. This document was designed to be a companion to the "Council of Chief State School Officers' Accommodations Manual: How to Select, Administer, and Evaluate Use of Accommodations for Instruction and…

Attention & Cognitive Style, FY 1972.

ERIC Educational Resources Information Center

Wright, John C.

A study is presented which concentrates on the development of a cognitive style assessment instrument for 3- to 8-year-olds and on a series of studies designed to evaluate the role of stylistic and attentional processes in the development of various competencies in young children. This report incorporates a manual for users, a technical report on…

ATMS Step By Step.

ERIC Educational Resources Information Center

National Library of Australia, Canberra.

This manual is designed to provide an introduction and basic guide to the use of IBM's Advanced Text Management System (ATMS), the text processing system to be used for the creation of Australian data bases within AUSINET. Instructions are provided for using the system to enter, store, retrieve, and modify data, which may then be displayed at the…

Task Simulation: Word Processing. Teacher [and Student Manuals], B. Correspondence Secretary.

ERIC Educational Resources Information Center

Burch, Geralyn H.

This task-simulation learning module on being a correspondence secretary in a realty office for secondary and postsecondary teachers and students, the fifth in a series of eleven task and in-basket simulations, was designed to provide individualized instruction in office occupations courses, such as introductory business and typewriting. (Each of…

Designing User Manuals for the Online Public Access Catalog.

ERIC Educational Resources Information Center

Seiden, Peggy; Sullivan, Patricia

1986-01-01

Describes the process of developing and revising a brochure to guide library patrons in conducting an author search on an online public access catalog in order to demonstrate the application of four steps in production of a functional document--analysis; planning; development; evaluation, testing, and revision. Three sources are given. (EJS)

Seismology software: state of the practice

NASA Astrophysics Data System (ADS)

Smith, W. Spencer; Zeng, Zheng; Carette, Jacques

2018-05-01

We analyzed the state of practice for software development in the seismology domain by comparing 30 software packages on four aspects: product, implementation, design, and process. We found room for improvement in most seismology software packages. The principal areas of concern include a lack of adequate requirements and design specification documents, a lack of test data to assess reliability, a lack of examples to get new users started, and a lack of technological tools to assist with managing the development process. To assist going forward, we provide recommendations for a document-driven development process that includes a problem statement, development plan, requirement specification, verification and validation (V&V) plan, design specification, code, V&V report, and a user manual. We also provide advice on tool use, including issue tracking, version control, code documentation, and testing tools.

Seismology software: state of the practice

NASA Astrophysics Data System (ADS)

Smith, W. Spencer; Zeng, Zheng; Carette, Jacques

2018-02-01

We analyzed the state of practice for software development in the seismology domain by comparing 30 software packages on four aspects: product, implementation, design, and process. We found room for improvement in most seismology software packages. The principal areas of concern include a lack of adequate requirements and design specification documents, a lack of test data to assess reliability, a lack of examples to get new users started, and a lack of technological tools to assist with managing the development process. To assist going forward, we provide recommendations for a document-driven development process that includes a problem statement, development plan, requirement specification, verification and validation (V&V) plan, design specification, code, V&V report, and a user manual. We also provide advice on tool use, including issue tracking, version control, code documentation, and testing tools.

Analysis of multiple activity manual materials handling tasks using A Guide to Manual Materials Handling.

PubMed

Mital, A

1999-01-01

Manual handling of materials continues to be a hazardous activity, leading to a very significant number of severe overexertion injuries. Designing jobs that are within the physical capabilities of workers is one approach ergonomists have adopted to redress this problem. As a result, several job design procedures have been developed over the years. However, these procedures are limited to designing or evaluating only pure lifting jobs or only the lifting aspect of a materials handling job. This paper describes a general procedure that may be used to design or analyse materials handling jobs that involve several different kinds of activities (e.g. lifting, lowering, carrying, pushing, etc). The job design/analysis procedure utilizes an elemental approach (breaking the job into elements) and relies on databases provided in A Guide to Manual Materials Handling to compute associated risk factors. The use of the procedure is demonstrated with the help of two case studies.

TU-C-17A-03: An Integrated Contour Evaluation Software Tool Using Supervised Pattern Recognition for Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, H; Tan, J; Kavanaugh, J

Purpose: Radiotherapy (RT) contours delineated either manually or semiautomatically require verification before clinical usage. Manual evaluation is very time consuming. A new integrated software tool using supervised pattern contour recognition was thus developed to facilitate this process. Methods: The contouring tool was developed using an object-oriented programming language C# and application programming interfaces, e.g. visualization toolkit (VTK). The C# language served as the tool design basis. The Accord.Net scientific computing libraries were utilized for the required statistical data processing and pattern recognition, while the VTK was used to build and render 3-D mesh models from critical RT structures in real-timemore » and 360° visualization. Principal component analysis (PCA) was used for system self-updating geometry variations of normal structures based on physician-approved RT contours as a training dataset. The inhouse design of supervised PCA-based contour recognition method was used for automatically evaluating contour normality/abnormality. The function for reporting the contour evaluation results was implemented by using C# and Windows Form Designer. Results: The software input was RT simulation images and RT structures from commercial clinical treatment planning systems. Several abilities were demonstrated: automatic assessment of RT contours, file loading/saving of various modality medical images and RT contours, and generation/visualization of 3-D images and anatomical models. Moreover, it supported the 360° rendering of the RT structures in a multi-slice view, which allows physicians to visually check and edit abnormally contoured structures. Conclusion: This new software integrates the supervised learning framework with image processing and graphical visualization modules for RT contour verification. This tool has great potential for facilitating treatment planning with the assistance of an automatic contour evaluation module in avoiding unnecessary manual verification for physicians/dosimetrists. In addition, its nature as a compact and stand-alone tool allows for future extensibility to include additional functions for physicians’ clinical needs.« less

The New Zealand Playground Safety Manual: A Report on Its Development, Implementation, and Success.

ERIC Educational Resources Information Center

Jambor, Tom

"The New Zealand Playground Safety Manual" was designed for early childhood services, primary and intermediate schools, and park administrators. The manual was developed with the input of practitioners who attended seminars held throughout New Zealand and who reviewed all segments of the manual. Part 1 of the manual presents five steps…

Guidelines for Keeping the Cornell Farm Account Book. Teacher Manual.

ERIC Educational Resources Information Center

Paterson, Dale J.

This teacher's manual is designed to complement the student manual Guidelines for Keeping Cornell Farm Account Book. The first part of the teacher manual contains lists of concepts that should be taught within each of the fifteen units of instruction. The remainder of the teacher's manual provides the fifteen units of instruction included in the…

ISLE (Image and Signal Processing LISP Environment) reference manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sherwood, R.J.; Searfus, R.M.

1990-01-01

ISLE is a rapid prototyping system for performing image and signal processing. It is designed to meet the needs of a person doing development of image and signal processing algorithms in a research environment. The image and signal processing modules in ISLE form a very capable package in themselves. They also provide a rich environment for quickly and easily integrating user-written software modules into the package. ISLE is well suited to applications in which there is a need to develop a processing algorithm in an interactive manner. It is straightforward to develop the algorithms, load it into ISLE, apply themore » algorithm to an image or signal, display the results, then modify the algorithm and repeat the develop-load-apply-display cycle. ISLE consists of a collection of image and signal processing modules integrated into a cohesive package through a standard command interpreter. ISLE developer elected to concentrate their effort on developing image and signal processing software rather than developing a command interpreter. A COMMON LISP interpreter was selected for the command interpreter because it already has the features desired in a command interpreter, it supports dynamic loading of modules for customization purposes, it supports run-time parameter and argument type checking, it is very well documented, and it is a commercially supported product. This manual is intended to be a reference manual for the ISLE functions The functions are grouped into a number of categories and briefly discussed in the Function Summary chapter. The full descriptions of the functions and all their arguments are given in the Function Descriptions chapter. 6 refs.« less

Proceedings of the Interservice/Industry Training Equipment Conference (5th) Held at Washington, DC on November 14-16, 1983. Volume 1.

DTIC Science & Technology

1983-11-16

vironments; and the other half will be from the training application, the sun’s interference with in- operational training environment. frared missiles... interference . Similarly, a The commercial simulators are adequately sup- lesser involvement in the design review process ported with far fewer spares and...Physical Design regulations on Electromagnetic Interference Manual (DM-13).(18) Electronic Se urity is provides some unclassified emanation data concerned

Dynamic message sign message design and display manual training : participant notebook, two-day course.

DOT National Transportation Integrated Search

2009-03-01

This Dynamic Message Sign Message Design and Display Manual was written for use by Texas Department of : Transportation (TxDOT) personnel who have responsibility for the operation of and/or message design for large : permanent dynamic message signs (...

Replacing ODCs in a Critical Hand Cleaning Manual Electronics Assembly Operation

NASA Technical Reports Server (NTRS)

Bonner, J. K.; Walton, Sharon

1997-01-01

The manufacture of high reliability electronics assemblies for spacecraft and ground support equipment still often involves manual assembly processes. In addition, rework and repair of critical assemblies aslo often entails manual assembly processes.

Corporate ergonomics programme at BCM Airdrie. Boots Contract Manufacturing.

PubMed

Smyth, Joanne

2003-01-01

The production processes at the BCM Airdrie site range from manual loading tasks in the manufacturing areas to high frequency packaging assembly tasks on the production lines. Both are jobs that are known to carry risk to musculoskeletal health, so an ergonomist was appointed to design and co-ordinate an ergonomics programme for the site to control these risks. This paper details the programme that has evolved to proactively manage musculoskeletal risks in the design of both new and existing equipment and processes. The ergonomics procedures described primarily involve the engineers from all areas of the factory, and the process for ergonomics involvement with engineering design projects is described. Shop-floor personnel involvement is considered to be an essential part of the programme and 'Ergonomics Champions' are being trained on the packing lines to monitor the risks that are sometimes introduced with the different designs of product packaging.

Power: A Repossesion Manual: Organizing Strategies for Citizens.

ERIC Educational Resources Information Center

Speeter, Greg

The purpose of this manual is to encourage the growth of community organization and to make the process of mobilizing a community and the skills involved known to those who participate in the organizing process. It offers practical suggestions on understanding the organizing process, diagnosing, and improving it. The manual is written with the…

Delaware traffic calming design manual

DOT National Transportation Integrated Search

2000-09-10

The Delaware Traffic Calming Manual consists of roadway design standards that are intended to encourage closer adherence to posted speeds, discourage cut-through traffic, enhance vehicular and pedestrian safety and community aesthetics. Its purpose i...

Rock slope design guide.

DOT National Transportation Integrated Search

2011-04-01

This Manual is intended to provide guidance for the design of rock cut slopes, rockfall catchment, and : rockfall controls. Recommendations presented in this manual are based on research presented in Shakoor : and Admassu (2010) entitled Rock Slop...

A Customized Attention-Based Long Short-Term Memory Network for Distant Supervised Relation Extraction.

PubMed

He, Dengchao; Zhang, Hongjun; Hao, Wenning; Zhang, Rui; Cheng, Kai

2017-07-01

Distant supervision, a widely applied approach in the field of relation extraction can automatically generate large amounts of labeled training corpus with minimal manual effort. However, the labeled training corpus may have many false-positive data, which would hurt the performance of relation extraction. Moreover, in traditional feature-based distant supervised approaches, extraction models adopt human design features with natural language processing. It may also cause poor performance. To address these two shortcomings, we propose a customized attention-based long short-term memory network. Our approach adopts word-level attention to achieve better data representation for relation extraction without manually designed features to perform distant supervision instead of fully supervised relation extraction, and it utilizes instance-level attention to tackle the problem of false-positive data. Experimental results demonstrate that our proposed approach is effective and achieves better performance than traditional methods.

C3 System Performance Simulation and User Manual. Getting Started: Guidelines for Users

NASA Technical Reports Server (NTRS)

2006-01-01

This document is a User's Manual describing the C3 Simulation capabilities. The subject work was designed to simulate the communications involved in the flight of a Remotely Operated Aircraft (ROA) using the Opnet software. Opnet provides a comprehensive development environment supporting the modeling of communication networks and distributed systems. It has tools for model design, simulation, data collection, and data analysis. Opnet models are hierarchical -- consisting of a project which contains node models which in turn contain process models. Nodes can be fixed, mobile, or satellite. Links between nodes can be physical or wireless. Communications are packet based. The model is very generic in its current form. Attributes such as frequency and bandwidth can easily be modified to better reflect a specific platform. The model is not fully developed at this stage -- there are still more enhancements to be added. Current issues are documented throughout this guide.

Computer-Assisted Automated Scoring of Polysomnograms Using the Somnolyzer System

PubMed Central

Punjabi, Naresh M.; Shifa, Naima; Dorffner, Georg; Patil, Susheel; Pien, Grace; Aurora, Rashmi N.

2015-01-01

Study Objectives: Manual scoring of polysomnograms is a time-consuming and tedious process. To expedite the scoring of polysomnograms, several computerized algorithms for automated scoring have been developed. The overarching goal of this study was to determine the validity of the Somnolyzer system, an automated system for scoring polysomnograms. Design: The analysis sample comprised of 97 sleep studies. Each polysomnogram was manually scored by certified technologists from four sleep laboratories and concurrently subjected to automated scoring by the Somnolyzer system. Agreement between manual and automated scoring was examined. Sleep staging and scoring of disordered breathing events was conducted using the 2007 American Academy of Sleep Medicine criteria. Setting: Clinical sleep laboratories. Measurements and Results: A high degree of agreement was noted between manual and automated scoring of the apnea-hypopnea index (AHI). The average correlation between the manually scored AHI across the four clinical sites was 0.92 (95% confidence interval: 0.90–0.93). Similarly, the average correlation between the manual and Somnolyzer-scored AHI values was 0.93 (95% confidence interval: 0.91–0.96). Thus, interscorer correlation between the manually scored results was no different than that derived from manual and automated scoring. Substantial concordance in the arousal index, total sleep time, and sleep efficiency between manual and automated scoring was also observed. In contrast, differences were noted between manually and automated scored percentages of sleep stages N1, N2, and N3. Conclusion: Automated analysis of polysomnograms using the Somnolyzer system provides results that are comparable to manual scoring for commonly used metrics in sleep medicine. Although differences exist between manual versus automated scoring for specific sleep stages, the level of agreement between manual and automated scoring is not significantly different than that between any two human scorers. In light of the burden associated with manual scoring, automated scoring platforms provide a viable complement of tools in the diagnostic armamentarium of sleep medicine. Citation: Punjabi NM, Shifa N, Dorffner G, Patil S, Pien G, Aurora RN. Computer-assisted automated scoring of polysomnograms using the Somnolyzer system. SLEEP 2015;38(10):1555–1566. PMID:25902809

Layout compliance for triple patterning lithography: an iterative approach

NASA Astrophysics Data System (ADS)

Yu, Bei; Garreton, Gilda; Pan, David Z.

2014-10-01

As the semiconductor process further scales down, the industry encounters many lithography-related issues. In the 14nm logic node and beyond, triple patterning lithography (TPL) is one of the most promising techniques for Metal1 layer and possibly Via0 layer. As one of the most challenging problems in TPL, recently layout decomposition efforts have received more attention from both industry and academia. Ideally the decomposer should point out locations in the layout that are not triple patterning decomposable and therefore manual intervention by designers is required. A traditional decomposition flow would be an iterative process, where each iteration consists of an automatic layout decomposition step and manual layout modification task. However, due to the NP-hardness of triple patterning layout decomposition, automatic full chip level layout decomposition requires long computational time and therefore design closure issues continue to linger around in the traditional flow. Challenged by this issue, we present a novel incremental layout decomposition framework to facilitate accelerated iterative decomposition. In the first iteration, our decomposer not only points out all conflicts, but also provides the suggestions to fix them. After the layout modification, instead of solving the full chip problem from scratch, our decomposer can provide a quick solution for a selected portion of layout. We believe this framework is efficient, in terms of performance and designer friendly.

STDs and HIV: A Guide for Today's Young Adults. Instructor's Guide. Student Manual.

ERIC Educational Resources Information Center

Yarber, William L.

The curriculum for sexually transmitted diseases (STDs) and Human Immunodeficiency Virus (HIV) presented in these two manuals is designed for grades 7-12. Six sections of the student manual, each focused on a particular "STD/HIV Fact," are designed to help young adults learn how to avoid STDs, how STDs are and are not communicated, what to do to…

Dynamic message sign message design and display manual training : participant notebook, one-day "core" course.

DOT National Transportation Integrated Search

2009-03-01

This Dynamic Message Sign Message Design and Display Manual was written for use by Texas Department of Transportation (TxDOT) personnel who have responsibility for the operation of and/or message design for large permanent dynamic message signs (DMSs...

Recommended use of reclaimed asphalt pavement in the Superpave mix design method: technician's manual.

DOT National Transportation Integrated Search

2001-01-01

This manual is a reference guide for mix design and field testing technicians who deal with reclaimed asphalt pavement (RAP) in Superpave mixtures. It will provide detailed descriptions and examples of each step involved in designing and testing a Su...

History through Art and Architecture: Ancient Greek Architecture [and] Ancient Greek Sculpture. Teacher's Manual.

ERIC Educational Resources Information Center

Campbell, Ann

This document consists of two teaching manuals designed to accompany a commercially-available "multicultural, interdisciplinary video program," consisting of four still videotape programs (72 minutes, 226 frames), one teaching poster, and these two manuals. "Teacher's Manual: Ancient Greek Architecture" covers: "Ancient…

Auto Draw from Excel Input Files

NASA Technical Reports Server (NTRS)

Strauss, Karl F.; Goullioud, Renaud; Cox, Brian; Grimes, James M.

2011-01-01

The design process often involves the use of Excel files during project development. To facilitate communications of the information in the Excel files, drawings are often generated. During the design process, the Excel files are updated often to reflect new input. The problem is that the drawings often lag the updates, often leading to confusion of the current state of the design. The use of this program allows visualization of complex data in a format that is more easily understandable than pages of numbers. Because the graphical output can be updated automatically, the manual labor of diagram drawing can be eliminated. The more frequent update of system diagrams can reduce confusion and reduce errors and is likely to uncover symmetric problems earlier in the design cycle, thus reducing rework and redesign.

Measurements agreement between low-cost and high-level handheld 3D scanners to scan the knee for designing a 3D printed knee brace

PubMed Central

2018-01-01

Use of additive manufacturing is growing rapidly in the orthotics field. This technology allows orthotics to be designed directly on digital scans of limbs. However, little information is available about scanners and 3D scans. The aim of this study is to look at the agreement between manual measurements, high-level and low-cost handheld 3D scanners. We took two manual measurements and three 3D scans with each scanner from 14 lower limbs. The lower limbs were divided into 17 sections of 30mm each from 180mm above the mid-patella to 300mm below. Time to record and to process the three 3D scans for scanners methods were compared with Student t-test while Bland-Altman plots were used to study agreement between circumferences of each section from the three methods. The record time was 97s shorter with high-level scanner than with the low-cost (p = .02) while the process time was nine times quicker with the low-cost scanner (p < .01). An overestimation of 2.5mm was found in high-level scanner compared to manual measurement, but with a better repeatability between measurements. The low-cost scanner tended to overestimate the circumferences from 0.1% to 1.5%, overestimation being greater for smaller circumferences. In conclusion, 3D scanners provide more information about the shape of the lower limb, but the reliability depends on the 3D scanner and the size of the scanned segment. Low-cost scanners could be useful for clinicians because of the simple and fast process, but attention should be focused on accuracy, which depends on the scanned body segment. PMID:29320560

Measurements agreement between low-cost and high-level handheld 3D scanners to scan the knee for designing a 3D printed knee brace.

PubMed

Dessery, Yoann; Pallari, Jari

2018-01-01

Use of additive manufacturing is growing rapidly in the orthotics field. This technology allows orthotics to be designed directly on digital scans of limbs. However, little information is available about scanners and 3D scans. The aim of this study is to look at the agreement between manual measurements, high-level and low-cost handheld 3D scanners. We took two manual measurements and three 3D scans with each scanner from 14 lower limbs. The lower limbs were divided into 17 sections of 30mm each from 180mm above the mid-patella to 300mm below. Time to record and to process the three 3D scans for scanners methods were compared with Student t-test while Bland-Altman plots were used to study agreement between circumferences of each section from the three methods. The record time was 97s shorter with high-level scanner than with the low-cost (p = .02) while the process time was nine times quicker with the low-cost scanner (p < .01). An overestimation of 2.5mm was found in high-level scanner compared to manual measurement, but with a better repeatability between measurements. The low-cost scanner tended to overestimate the circumferences from 0.1% to 1.5%, overestimation being greater for smaller circumferences. In conclusion, 3D scanners provide more information about the shape of the lower limb, but the reliability depends on the 3D scanner and the size of the scanned segment. Low-cost scanners could be useful for clinicians because of the simple and fast process, but attention should be focused on accuracy, which depends on the scanned body segment.

SU-E-T-497: Semi-Automated in Vivo Radiochromic Film Dosimetry Using a Novel Image Processing Algorithm

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reyhan, M; Yue, N

Purpose: To validate an automated image processing algorithm designed to detect the center of radiochromic film used for in vivo film dosimetry against the current gold standard of manual selection. Methods: An image processing algorithm was developed to automatically select the region of interest (ROI) in *.tiff images that contain multiple pieces of radiochromic film (0.5x1.3cm{sup 2}). After a user has linked a calibration file to the processing algorithm and selected a *.tiff file for processing, an ROI is automatically detected for all films by a combination of thresholding and erosion, which removes edges and any additional markings for orientation.more » Calibration is applied to the mean pixel values from the ROIs and a *.tiff image is output displaying the original image with an overlay of the ROIs and the measured doses. Validation of the algorithm was determined by comparing in vivo dose determined using the current gold standard (manually drawn ROIs) versus automated ROIs for n=420 scanned films. Bland-Altman analysis, paired t-test, and linear regression were performed to demonstrate agreement between the processes. Results: The measured doses ranged from 0.2-886.6cGy. Bland-Altman analysis of the two techniques (automatic minus manual) revealed a bias of -0.28cGy and a 95% confidence interval of (5.5cGy,-6.1cGy). These values demonstrate excellent agreement between the two techniques. Paired t-test results showed no statistical differences between the two techniques, p=0.98. Linear regression with a forced zero intercept demonstrated that Automatic=0.997*Manual, with a Pearson correlation coefficient of 0.999. The minimal differences between the two techniques may be explained by the fact that the hand drawn ROIs were not identical to the automatically selected ones. The average processing time was 6.7seconds in Matlab on an IntelCore2Duo processor. Conclusion: An automated image processing algorithm has been developed and validated, which will help minimize user interaction and processing time of radiochromic film used for in vivo dosimetry.« less

Application of Design of Experiments and Surrogate Modeling within the NASA Advanced Concepts Office, Earth-to-Orbit Design Process

NASA Technical Reports Server (NTRS)

Zwack, Mathew R.; Dees, Patrick D.; Holt, James B.

2016-01-01

Decisions made during early conceptual design have a large impact upon the expected life-cycle cost (LCC) of a new program. It is widely accepted that up to 80% of such cost is committed during these early design phases. Therefore, to help minimize LCC, decisions made during conceptual design must be based upon as much information as possible. To aid in the decision making for new launch vehicle programs, the Advanced Concepts Office (ACO) at NASA Marshall Space Flight Center (MSFC) provides rapid turnaround pre-phase A and phase A concept definition studies. The ACO team utilizes a proven set of tools to provide customers with a full vehicle mass breakdown to tertiary subsystems, preliminary structural sizing based upon worst-case flight loads, and trajectory optimization to quantify integrated vehicle performance for a given mission. Although the team provides rapid turnaround for single vehicle concepts, the scope of the trade space can be limited due to analyst availability and the manpower requirements for manual execution of the analysis tools. In order to enable exploration of a broader design space, the ACO team has implemented an advanced design methods (ADM) based approach. This approach applies the concepts of design of experiments (DOE) and surrogate modeling to more exhaustively explore the trade space and provide the customer with additional design information to inform decision making. This paper will first discuss the automation of the ACO tool set, which represents a majority of the development effort. In order to fit a surrogate model within tolerable error bounds a number of DOE cases are needed. This number will scale with the number of variable parameters desired and the complexity of the system's response to those variables. For all but the smallest design spaces, the number of cases required cannot be produced within an acceptable timeframe using a manual process. Therefore, automation of the tools was a key enabler for the successful application of an ADM approach to an ACO design study. Following the overview of the tool set automation, an example problem will be given to illustrate the implementation of the ADM approach. The example problem will first cover the inclusion of ground rules and assumptions (GR&A) for a study. The GR&A are very important to the study as they determine the constraints within which a trade study can be conducted. These trades must ultimately reconcile with the customer's desired output and any anticipated "what if" questions. The example problem will then illustrate the setup and execution of a DOE through the automated ACO tools. This process is accomplished more efficiently in this work by splitting the tools into two separate environments. The first environment encompasses the structural optimization and mass estimation tools, while the second is focused on trajectory optimization. Surrogate models are fit to the outputs of each environment and are "integrated" via connection of the surrogate equations. Throughout this process, checks are implemented to compare the output of the surrogates to the output of manually run cases to ensure that the error of the final surrogates is at an acceptable level. The conclusion of the example problem demonstrates the utility of the ADM based approach. Using surrogate models gives the ACO team the ability to visualize vehicle sensitivities to various design parameters and identify regions of interest within the design space. The ADM approach can thus be used to inform concept down selection and isolate promising vehicle configurations to be explored in more detail through the manual design process. In addition it provides the customer with an almost instantaneous turnaround on any ''what if" questions that may arise within the bounds of the surrogate model. This approach ultimately expands the ability of the ACO team to provide its customer with broad and rapid turnaround trade studies for launch vehicle conceptual design. The ability to identify a selection of designs which can meet the customer requirements will help ensure lower LCC of launch vehicle designs originating from ACO.

Application of Design of Experiments and Surrogate Modeling within the NASA Advanced Concepts Office, Earth-to-Orbit Design Process

NASA Technical Reports Server (NTRS)

Zwack, Mathew R.; Dees, Patrick D.; Holt, James B.

2016-01-01

Decisions made during early conceptual design have a large impact upon the expected life-cycle cost (LCC) of a new program. It is widely accepted that up to 80% of such cost is committed during these early design phases.1 Therefore, to help minimize LCC, decisions made during conceptual design must be based upon as much information as possible. To aid in the decision making for new launch vehicle programs, the Advanced Concepts Office (ACO) at NASA Marshall Space Flight Center (MSFC) provides rapid turnaround pre-phase A and phase A concept definition studies. The ACO team utilizes a proven set of tools to provide customers with a full vehicle mass breakdown to tertiary subsystems, preliminary structural sizing based upon worst-case flight loads, and trajectory optimization to quantify integrated vehicle performance for a given mission.2 Although the team provides rapid turnaround for single vehicle concepts, the scope of the trade space can be limited due to analyst availability and the manpower requirements for manual execution of the analysis tools. In order to enable exploration of a broader design space, the ACO team has implemented an Advanced Design Methods (ADM) based approach. This approach applies the concepts of Design of Experiments (DOE) and surrogate modeling to more exhaustively explore the trade space and provide the customer with additional design information to inform decision making. This paper will first discuss the automation of the ACO tool set, which represents a majority of the development e ort. In order to t a surrogate model within tolerable error bounds a number of DOE cases are needed. This number will scale with the number of variable parameters desired and the complexity of the system's response to those variables. For all but the smallest design spaces, the number of cases required cannot be produced within an acceptable timeframe using a manual process. Therefore, automation of the tools was a key enabler for the successful application of an ADM approach to an ACO design study. Following the overview of the tool set automation, an example problem will be given to illustrate the implementation of the ADM approach. The example problem will first cover the inclusion of Ground Rules and Assumptions (GR&A) for a study. The GR&A are very important to the study as they determine the constraints within which a trade study can be conducted. These trades must ultimately reconcile with the customer's desired output and any anticipated \\what if" questions. The example problem will then illustrate the setup and execution of a DOE through the automated ACO tools. This process is accomplished more efficiently in this work by splitting the tools into two separate environments. The first environment encompasses the structural optimization and mass estimation tools, while the second is focused on trajectory optimization. Surrogate models are t to the outputs of each environment and are integrated via connection of the surrogate equations. Throughout this process, checks are implemented to compare the output of the surrogates to the output of manually run cases to ensure that the error of the final surrogates is at an acceptable level. The conclusion of the example problem demonstrates the utility of the ADM based approach. Using surrogate models gives the ACO team the ability to visualize vehicle sensitivities to various design parameters and identify regions of interest within the design space. The ADM approach can thus be used to inform concept down selection and isolate promising vehicle configurations to be explored in more detail through the manual design process. In addition it provides the customer with an almost instantaneous turnaround on any \\what if" questions that may arise within the bounds of the surrogate model. This approach ultimately expands the ability of the ACO team to provide its customer with broad and rapid turnaround trade studies for launch vehicle conceptual design. The ability to identify a selection of designs which can meet the customer requirements will have the potential to lower LCC of launch vehicle designs originating from ACO.

Urban Tree Risk Management:A Community Guide to Program Design and Implementation

Treesearch

Jill Pokorny; Joseph O' Brien; Richard Hauer; Gary Johnson; Jana Albers; Peter Bedker; Manfred Mielke

2003-01-01

Urban Tree Risk Management: A Community Guide to Program Design and Implementation is a fully illustrated, easy to read training manual written for community leaders, administrators, city foresters, parks and public works staff, and private tree care practitioners. The manual is designed to assist communities design, adopt and implement tree risk management programs,...

The Assessment Supplement: A Faculty-Designed Addition to NCC's Manual, "Concepts & Procedures for Academic Assessment." First Edition.

ERIC Educational Resources Information Center

Nassau Community Coll., Garden City, NY.

This document is the first in a series of annual, faculty-designed supplements to Nassau Community College's (NCC's) (New York) manual, "Concepts & Procedures for Academic Assessment." The supplements are intended to provide faculty a forum through which they can communicate assessment designs and the impacts of those designs on…

Prototype of a computer method for designing and analyzing heating, ventilating and air conditioning proportional, electronic control systems

NASA Astrophysics Data System (ADS)

Barlow, Steven J.

1986-09-01

The Air Force needs a better method of designing new and retrofit heating, ventilating and air conditioning (HVAC) control systems. Air Force engineers currently use manual design/predict/verify procedures taught at the Air Force Institute of Technology, School of Civil Engineering, HVAC Control Systems course. These existing manual procedures are iterative and time-consuming. The objectives of this research were to: (1) Locate and, if necessary, modify an existing computer-based method for designing and analyzing HVAC control systems that is compatible with the HVAC Control Systems manual procedures, or (2) Develop a new computer-based method of designing and analyzing HVAC control systems that is compatible with the existing manual procedures. Five existing computer packages were investigated in accordance with the first objective: MODSIM (for modular simulation), HVACSIM (for HVAC simulation), TRNSYS (for transient system simulation), BLAST (for building load and system thermodynamics) and Elite Building Energy Analysis Program. None were found to be compatible or adaptable to the existing manual procedures, and consequently, a prototype of a new computer method was developed in accordance with the second research objective.

Programming Support Library (PSL). Users Manual.

DTIC Science & Technology

1978-05-01

which provides the tools to organize, implement, and control computer program develop- ment. This involves the support of the actual programming process...provides the tools toorganize, implement, and control computer program development. The system is designed specifically to support top-down development...Structured Programming are finding increasing application in the computing community. Structured programs are, however, difficult to write in

Activated Biological Filters (ABF Towers). Instructor's Guide. Biological Treatment Process Control.

ERIC Educational Resources Information Center

Wooley, John F.

This instructor's manual contains materials needed to teach a two-lesson unit on activated bio-filters (ABF). These materials include: (1) an overview of the two lessons; (2) lesson plans; (3) lecture outlines (keyed to a set of slides designed for use with the lessons); (4) overhead transparency masters; (5) worksheets for each lesson (with…

Competencies for Teachers of Learners Who Are Deafblind: Perkins National Deafblind Training Project.

ERIC Educational Resources Information Center

McLetchie, Barbara A. B.; Riggio, Marianne

The statements of knowledge and skills contained in this manual are the outcome of a collaborative process involving a committee that included the project staff, university level faculty, and a state coordinator of deaf-blind services. The competencies are designed for use as a blueprint for course development and field experiences by university…

Automation of Acquisition Records and Routine in the University Library, Newcastle upon Tyne

ERIC Educational Resources Information Center

Line, Maurice B.

2006-01-01

Purpose: Reports on the trial of an automated order routine for the University Library in Newcastle which began in April 1966. Design/methodology/approach: Presents the author's experiences of the manual order processing system, and the impetus for trialling an automated system. The stages of the automated system are described in detail. Findings:…

Filter Leaf. Operational Control Tests for Wastewater Treatment Facilities. Instructor's Manual [and] Student Workbook.

ERIC Educational Resources Information Center

Wooley, John F.

In the operation of vacuum filters and belt filters, it is desirable to evaluate the performance of different types of filter media and conditioning processes. The filter leaf test, which is used to evaluate these items, is described. Designed for individuals who have completed National Pollutant Discharge Elimination System (NPDES) level 1…

Instructivo del Alfabetizador: Poblacion Urbana (Reading and Writing Instruction: Urban Population).

ERIC Educational Resources Information Center

Instituto Nacional para la Educacion de los Adultos, Mexico City (Mexico).

This series of instructional materials is designed for Spanish speaking adults in Mexico who are in the process of becoming literate or have recently become literate in their native language. The reading/writing workbook is presented in two volumes along with a teacher's manual for an adult literacy program directed at urban inhabitants of Mexico.…

Instructivo del Alfabetizador: Poblacion Rural (Reading and Writing Instruction: Rural Population).

ERIC Educational Resources Information Center

Instituto Nacional para la Educacion de los Adultos, Mexico City (Mexico).

This Mexican series of instructional materials is designed for Spanish speaking adults who are in the process of becoming literate or have recently become literate in their native language. The reading/writing workbook is presented in two volumes along with a teacher's manual for an adult literacy program directed at rural inhabitants of Mexico.…

NFDRSPC: The National Fire-Danger Rating System on a Personal Computer

Treesearch

Bryan G. Donaldson; James T. Paul

1990-01-01

This user's guide is an introductory manual for using the 1988 version (Burgan 1988) of the National Fire-Danger Rating System on an IBM PC or compatible computer. NFDRSPC is a window-oriented, interactive computer program that processes observed and forecast weather with fuels data to produce NFDRS indices. Other program features include user-designed display...

Discovering Animal Ways, Elementary School Science, Level Three, Teaching Manual.

ERIC Educational Resources Information Center

Hale, Helen E.

This pilot teaching unit is one of a series developed for use in elementary school science programs. This unit is designed to promote children's natural curiosity and to help those who show a reluctance to work with animals to overcome some of their fears. The student activities employ important scientific processes, such as observation,…

A Data Audit and Analysis Toolkit To Support Assessment of the First College Year.

ERIC Educational Resources Information Center

Paulson, Karen

This "toolkit" provides a process by which institutions can identify and use information resources to enhance the experiences and outcomes of first-year students. The toolkit contains a "Technical Manual" designed for use by the technical personnel who will be conducting the data audit and associated analyses. Administrators who want more…

Stirling engine design manual, 2nd edition

NASA Technical Reports Server (NTRS)

Martini, W. R.

1983-01-01

This manual is intended to serve as an introduction to Stirling cycle heat engines, as a key to the available literature on Stirling engines and to identify nonproprietary Stirling engine design methodologies. Two different fully described Stirling engines are discussed. Engine design methods are categorized as first order, second order, and third order with increased order number indicating increased complexity. FORTRAN programs are listed for both an isothermal second order design program and an adiabatic second order design program. Third order methods are explained and enumerated. In this second edition of the manual the references are updated. A revised personal and corporate author index is given and an expanded directory lists over 80 individuals and companies active in Stirling engines.

Federal lands highway project development and design manual

DOT National Transportation Integrated Search

2002-11-01

This manual has been developed to provide information and guidance to engineering staffs involved with project development and design of highways. It identifies those standards, specifications, guides, and references approved for use in carrying out ...

Manual on Student Suspensions in New York City Public Schools. Revised.

ERIC Educational Resources Information Center

Advocates for Children of New York, Inc., Long Island City.

This revised manual presents updated guidelines and regulations regarding student suspensions in New York City public schools. The manual is divided into four main sections: principal's suspension; superintendent's suspension; search and seizure; and suspension of special education students. The manual is specifically designed to assist the…

SolTrack: an automatic video processing software for in situ interface tracking.

PubMed

Griesser, S; Pierer, R; Reid, M; Dippenaar, R

2012-10-01

High-Resolution in situ observation of solidification experiments has become a powerful technique to improve the fundamental understanding of solidification processes of metals and alloys. In the present study, high-temperature laser-scanning confocal microscopy (HTLSCM) was utilized to observe and capture in situ solidification and phase transformations of alloys for subsequent post processing and analysis. Until now, this analysis has been very time consuming as frame-by-frame manual evaluation of propagating interfaces was used to determine the interface velocities. SolTrack has been developed using the commercial software package MATLAB and is designed to automatically detect, locate and track propagating interfaces during solidification and phase transformations as well as to calculate interfacial velocities. Different solidification phenomena have been recorded to demonstrate a wider spectrum of applications of this software. A validation, through comparison with manual evaluation, is included where the accuracy is shown to be very high. © 2012 The Authors Journal of Microscopy © 2012 Royal Microscopical Society.

Design and Construction Guidance for Community Shelters. FEMA 361.

ERIC Educational Resources Information Center

Federal Emergency Management Agency, Washington, DC.

This manual presents guidance to engineers, architects, building officials, and prospective shelter owners concerning the design and construction of community shelters that will provide protection during tornado and hurricane events. The manual covers two types of community shelters: stand-alone shelters designed to withstand high winds and the…

Mainstreaming Handicapped Individuals: Parks and Recreation Design Standards Manual.

ERIC Educational Resources Information Center

Illinois State Dept. of Conservation, Springfield.

Intended as a guide for designing and constructing accessible buildings and park facilities for handicapped persons, the manual details design considerations for the following areas: parks and recreation areas, identification signs, parking, trails, picnic areas, furnishings, camp sites, boating, fishing, play and game areas, swimming areas,…

Predictive design procedures, VESYS users manual : an interim design method for flexible pavements using the VESYS structural subsystem

DOT National Transportation Integrated Search

1978-01-01

This manual has been written to provide the pavement manager and design engineer with a ready reference of procedures to predict the structural responses and hence the integrity of flexible pavements. A pavement section of known geometry is chosen, a...

Low cost solar aray project: Experimental process system development unit for producing semiconductor-grade silicon using the silane-to-silicon process

NASA Technical Reports Server (NTRS)

1981-01-01

This phase consists of the engineering design, fabrication, assembly, operation, economic analysis, and process support R&D for an Experimental Process System Development Unit (EPSDU). The mechanical bid package was issued and the bid responses are under evaluation. Similarly, the electrical bid package was issued, however, responses are not yet due. The majority of all equipment is on order or has been received at the EPSDU site. The pyrolysis/consolidation process design package was issued. Preparation of process and instrumentation diagram for the free-space reactor was started. In the area of melting/consolidation, Kayex successfully melted chunk silicon and have produced silicon shot. The free-space reactor powder was successfully transported pneumatically from a storage bin to the auger feeder twenty-five feet up and was melted. The fluid-bed PDU has successfully operated at silane feed concentrations up to 21%. The writing of the operating manual has started. Overall, the design phase is nearing completion.

Knowledge elicitation for an operator assistant system in process control tasks

NASA Technical Reports Server (NTRS)

Boy, Guy A.

1988-01-01

A knowledge based system (KBS) methodology designed to study human machine interactions and levels of autonomy in allocation of process control tasks is presented. Users are provided with operation manuals to assist them in normal and abnormal situations. Unfortunately, operation manuals usually represent only the functioning logic of the system to be controlled. The user logic is often totally different. A method is focused on which illicits user logic to refine a KBS shell called an Operator Assistant (OA). If the OA is to help the user, it is necessary to know what level of autonomy gives the optimal performance of the overall man-machine system. For example, for diagnoses that must be carried out carefully by both the user and the OA, interactions are frequent, and processing is mostly sequential. Other diagnoses can be automated, in which the case the OA must be able to explain its reasoning in an appropriate level of detail. OA structure was used to design a working KBS called HORSES (Human Orbital Refueling System Expert System). Protocol analysis of pilots interacting with this system reveals that the a-priori analytical knowledge becomes more structured with training and the situation patterns more complex and dynamic. This approach can improve the a-priori understanding of human and automatic reasoning.

Texas highway operations manual

DOT National Transportation Integrated Search

1992-08-01

This document was developed for the Texas Department of Transportation to serve as a Department manual : addressing highway operations. The information in the manual covers a wide range of operational issues related tc : the planning, design, constru...

Nimbus 7 Coastal Zone Color Scanner (CZCS). Level 2 data product users' guide

NASA Technical Reports Server (NTRS)

Williams, S. P.; Szajna, E. F.; Hovis, W. A.

1985-01-01

The coastal zone color scanner (CZCS) is a scanning multispectral radiometer designed for the remote sensing of ocean color parameters from an earth orbiting space platform. A Technical Manual was designed for users of NIMBUS 7 CZCS Level 2 data products. It contains information which describes how the Level 1 data was process to obtain the Level 2 (derived) product. It contains information needed to operate on the data using digital computers and related equipment.

Interchange Safety Analysis Tool (ISAT) : user manual

DOT National Transportation Integrated Search

2007-06-01

This User Manual describes the usage and operation of the spreadsheet-based Interchange Safety Analysis Tool (ISAT). ISAT provides design and safety engineers with an automated tool for assessing the safety effects of geometric design and traffic con...

HTP-OligoDesigner: An Online Primer Design Tool for High-Throughput Gene Cloning and Site-Directed Mutagenesis.

PubMed

Camilo, Cesar M; Lima, Gustavo M A; Maluf, Fernando V; Guido, Rafael V C; Polikarpov, Igor

2016-01-01

Following burgeoning genomic and transcriptomic sequencing data, biochemical and molecular biology groups worldwide are implementing high-throughput cloning and mutagenesis facilities in order to obtain a large number of soluble proteins for structural and functional characterization. Since manual primer design can be a time-consuming and error-generating step, particularly when working with hundreds of targets, the automation of primer design process becomes highly desirable. HTP-OligoDesigner was created to provide the scientific community with a simple and intuitive online primer design tool for both laboratory-scale and high-throughput projects of sequence-independent gene cloning and site-directed mutagenesis and a Tm calculator for quick queries.

Students' experiences of learning manual clinical skills through simulation.

PubMed

Johannesson, Eva; Silén, Charlotte; Kvist, Joanna; Hult, Håkan

2013-03-01

Learning manual skills is a fundamental part of health care education, and motor, sensory and cognitive learning processes are essential aspects of professional development. Simulator training has been shown to enhance factors that facilitate motor and cognitive learning. The present study aimed to investigate the students' experiences and thoughts about their learning through simulation skills training. The study was designed for an educational setting at a clinical skills centre. Ten third-year undergraduate nursing students performed urethral catheterisation, using the virtual reality simulator UrecathVision™, which has haptic properties. The students practised in pairs. Each session was videotaped and the video was used to stimulate recall in subsequent interviews. The interviews were analysed using qualitative content analysis. The analysis from interviews resulted in three themes: what the students learn, how the students learn, and the simulator's contribution to the students' learning. Students learned manual skills, how to perform the procedure, and professional behaviour. They learned by preparing, watching, practising and reflecting. The simulator contributed by providing opportunities for students to prepare for the skills training, to see anatomical structures, to feel resistance, and to become aware of their own performance ability. The findings show that the students related the task to previous experiences, used sensory information, tested themselves and practised techniques in a hands-on fashion, and reflected in and on action. The simulator was seen as a facilitator to learning the manual skills. The study design, with students working in pairs combined with video recording, was found to enhance opportunities for reflection.

One-year incidence of carpal tunnel syndrome in Latino poultry processing workers and other Latino manual workers.

PubMed

Cartwright, Michael S; Walker, Francis O; Newman, Jill C; Schulz, Mark R; Arcury, Thomas A; Grzywacz, Joseph G; Mora, Dana C; Chen, Haiying; Eaton, Bethany; Quandt, Sara A

2014-03-01

To determine the incidence of carpal tunnel syndrome (CTS) over 1 year in Latino poultry processing workers. Symptoms and nerve conduction studies were used to identify Latino poultry processing workers (106 wrists) and Latinos in other manual labor occupations (257 wrists) that did not have CTS at baseline, and these individuals were then evaluated in the same manner 1 year later. Based on wrists, the 1-year incidence of CTS was higher in poultry processing workers than non-poultry manual workers (19.8% vs. 11.7%, P = 0.022). Poultry workers had a higher odds (1.89; P = 0.089) of developing CTS over 1 year compared to non-poultry manual workers. Latino poultry processing workers have an incidence of CTS that is possibly higher than Latinos in other manual labor positions. Latino poultry workers' high absolute and relative risk of CTS likely results from the repetitive and strenuous nature of poultry processing work. © 2013 Wiley Periodicals, Inc.

Introduction to Social Psychology: Administrative Manual [And] Student Manual [And] Unit Study Guide.

ERIC Educational Resources Information Center

Rankin, Robert E.

This learning package is a three-semester-hour, independent-study course in social psychology designed for postsecondary, external degree students. Keyed to the commercially published textbook "Social Psychology: Explorations in Understanding" (Del Mar, CA: CRM, 1974), the package consists of an administrator manual, a student manual, and a…

Vocational-Technical Physics Project. Instructor's Manual. Field Test Edition.

ERIC Educational Resources Information Center

Forsyth Technical Inst., Winston-Salem, NC.

This instructor's manual in vocational physics consists of five modules: Jacks, Thermometers, The Alternator, The Pool Table, and The Radiator. It is an individualized approach, designed for use with accompanying student manuals on each of the individual modules. Each module in the instructor's manual consists of a general description plus an…

Introduction to Hydraulics. Student's Manual.

ERIC Educational Resources Information Center

Texas Univ., Austin. Extension Instruction and Materials Center.

This manual on hydraulics is one of a series of individualized instructional materials for students. The manual is self-paced, but is designed to be used under the supervision of an instructor. The manual contains 10 assignments, each with all the information needed, a list of objectives that should be met, and exercise questions that can help in…

Solar Energy: System Sizing, Design, and Retrofit: Student Material. First Edition.

ERIC Educational Resources Information Center

Younger, Charles; Orsak, Charles G., Jr.

Designed for student use in "System Sizing, Design, and Retrofit," one of 11 courses in a 2-year associate degree program in solar technology, this manual provides readings, exercises, worksheets, bibliographies, and illustrations for 13 course modules. The manual, which corresponds to an instructor guide for the same course, covers the…

REFERENCE MANUAL FOR RASSMIT VERSION 2.1: SUB-SLAB DEPRESSURIZATION SYSTEM DESIGN PERFORMANCE SIMULATION PROGRAM

EPA Science Inventory

The report is a reference manual for RASSMlT Version 2.1, a computer program that was developed to simulate and aid in the design of sub-slab depressurization systems used for indoor radon mitigation. The program was designed to run on DOS-compatible personal computers to ensure ...

Solar Energy: Energy Conservation and Passive Design Concepts: Student Material. First Edition.

ERIC Educational Resources Information Center

Younger, Charles; Orsak, Charles G., Jr.

Designed for student use in "Energy Conservation and Passive Design Concepts," one of 11 courses in a 2-year associate degree program in solar technology, this manual provides readings, bibliographies, and illustrations for seven course modules. The manual, which corresponds to an instructor guide for the same course, covers the…

Computer Aided Design: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

ERIC Educational Resources Information Center

Cheng, Wan-Lee

This instructional manual contains 12 learning activity packets for use in a workshop in computer-aided design and drafting (CADD). The lessons cover the following topics: introduction to computer graphics and computer-aided design/drafting; coordinate systems; advance space graphics hardware configuration and basic features of the IBM PC…

INHYD: Computer code for intraply hybrid composite design. A users manual

NASA Technical Reports Server (NTRS)

Chamis, C. C.; Sinclair, J. H.

1983-01-01

A computer program (INHYD) was developed for intraply hybrid composite design. A users manual for INHYD is presented. In INHYD embodies several composite micromechanics theories, intraply hybrid composite theories, and an integrated hygrothermomechanical theory. The INHYD can be run in both interactive and batch modes. It has considerable flexibility and capability, which the user can exercise through several options. These options are demonstrated through appropriate INHYD runs in the manual.

Classification of Living Things. A Teacher's Manual for General Level Program Development. Grades 7 and 8. Science and Society Teaching Units. Informal Series/55.

ERIC Educational Resources Information Center

Roberts, Douglas A.; And Others

This manual is one of a series designed to assist junior high school teachers in developing general level or non-academic science programs which focus on the relationship between science and society. Although designed primarily for grades 7 and 8, the content is also suitable for students in grade 6. The major portion of the manual consists of six…

Assessment of Alternative Interfaces for Manual Commanding of Spacecraft Systems: Compatibility with Flexible Allocation Policies

NASA Technical Reports Server (NTRS)

Billman, Dorrit Owen; Schreckenghost, Debra; Miri, Pardis

2014-01-01

Astronauts will be responsible for executing a much larger body of procedures as human exploration moves further from Earth and Mission Control. Efficient, reliable methods for executing these procedures, including manual, automated, and mixed execution will be important. Our interface integrates step-by-step instruction with the means for execution. The research reported here compared manual execution using the new system to a system analogous to the manual-only system currently in use on the International Space Station, to assess whether user performance in manual operations would be as good or better with the new than with the legacy system. The system used also allows flexible automated execution. The system and our data lay the foundation for integrating automated execution into the flow of procedures designed for humans. In our formative study, we found speed and accuracy of manual procedure execution was better using the new, integrated interface over the legacy design.

A corrosion control manual for rail rapid transit

NASA Technical Reports Server (NTRS)

Gilbert, L. O.; Fitzgerald, J. F., II; Menke, J. T.

1982-01-01

In 1979, during the planning stage of the Metropolitan Dade County Transit System, the need was expressed for a corrosion control manual oriented to urban rapid transit system use. This manual responds to that need. The objective of the manual is to aid rail rapid transit agencies by providing practical solutions to selected corrosion problems. The scope of the manual encompasses corrosion problems of the facilities of rapid transit systems: structures and tracks, platforms and stations, power and signals, and cars. It also discusses stray electric current corrosion. Both design and maintenance solutions are provided for each problem. Also included are descriptions of the types of corrosion and their causes, descriptions of rapid transit properties, a list of corrosion control committees and NASA, DOD, and ASTM specifications and design criteria to which reference is made in the manual. A bibliography of papers and excerpts of reports and a glossary of frequency used terms are provided.

Cognitive search model and a new query paradigm

NASA Astrophysics Data System (ADS)

Xu, Zhonghui

2001-06-01

This paper proposes a cognitive model in which people begin to search pictures by using semantic content and find a right picture by judging whether its visual content is a proper visualization of the semantics desired. It is essential that human search is not just a process of matching computation on visual feature but rather a process of visualization of the semantic content known. For people to search electronic images in the way as they manually do in the model, we suggest that querying be a semantic-driven process like design. A query-by-design paradigm is prosed in the sense that what you design is what you find. Unlike query-by-example, query-by-design allows users to specify the semantic content through an iterative and incremental interaction process so that a retrieval can start with association and identification of the given semantic content and get refined while further visual cues are available. An experimental image retrieval system, Kuafu, has been under development using the query-by-design paradigm and an iconic language is adopted.

Experiments in concept modeling for radiographic image reports.

PubMed Central

Bell, D S; Pattison-Gordon, E; Greenes, R A

1994-01-01

OBJECTIVE: Development of methods for building concept models to support structured data entry and image retrieval in chest radiography. DESIGN: An organizing model for chest-radiographic reporting was built by analyzing manually a set of natural-language chest-radiograph reports. During model building, clinician-informaticians judged alternative conceptual structures according to four criteria: content of clinically relevant detail, provision for semantic constraints, provision for canonical forms, and simplicity. The organizing model was applied in representing three sample reports in their entirety. To explore the potential for automatic model discovery, the representation of one sample report was compared with the noun phrases derived from the same report by the CLARIT natural-language processing system. RESULTS: The organizing model for chest-radiographic reporting consists of 62 concept types and 17 relations, arranged in an inheritance network. The broadest types in the model include finding, anatomic locus, procedure, attribute, and status. Diagnoses are modeled as a subtype of finding. Representing three sample reports in their entirety added 79 narrower concept types. Some CLARIT noun phrases suggested valid associations among subtypes of finding, status, and anatomic locus. CONCLUSIONS: A manual modeling process utilizing explicitly stated criteria for making modeling decisions produced an organizing model that showed consistency in early testing. A combination of top-down and bottom-up modeling was required. Natural-language processing may inform model building, but algorithms that would replace manual modeling were not discovered. Further progress in modeling will require methods for objective model evaluation and tools for formalizing the model-building process. PMID:7719807

Centralized database for interconnection system design. [for spacecraft

NASA Technical Reports Server (NTRS)

Billitti, Joseph W.

1989-01-01

A database application called DFACS (Database, Forms and Applications for Cabling and Systems) is described. The objective of DFACS is to improve the speed and accuracy of interconnection system information flow during the design and fabrication stages of a project, while simultaneously supporting both the horizontal (end-to-end wiring) and the vertical (wiring by connector) design stratagems used by the Jet Propulsion Laboratory (JPL) project engineering community. The DFACS architecture is centered around a centralized database and program methodology which emulates the manual design process hitherto used at JPL. DFACS has been tested and successfully applied to existing JPL hardware tasks with a resulting reduction in schedule time and costs.

Note: Wide band amplifier for quartz tuning fork sensors with digitally controlled stray capacitance compensation.

PubMed

Peng, Ping; Hao, Lifeng; Ding, Ning; Jiao, Weicheng; Wang, Qi; Zhang, Jian; Wang, Rongguo

2015-11-01

We presented a preamplifier design for quartz tuning fork (QTF) sensors in which the stray capacitance is digitally compensated. In this design, the manually controlled variable capacitor is replaced by a pair of varicap diodes, whose capacitance could be accurately tuned by a bias voltage. A tuning circuit including a single side low power operational amplifier, a digital-to-analog converter, and a microprocessor is also described, and the tuning process can be conveniently carried out on a personal computer. For the design, the noise level was investigated experimentally.

Optimizing ELISAs for precision and robustness using laboratory automation and statistical design of experiments.

PubMed

Joelsson, Daniel; Moravec, Phil; Troutman, Matthew; Pigeon, Joseph; DePhillips, Pete

2008-08-20

Transferring manual ELISAs to automated platforms requires optimizing the assays for each particular robotic platform. These optimization experiments are often time consuming and difficult to perform using a traditional one-factor-at-a-time strategy. In this manuscript we describe the development of an automated process using statistical design of experiments (DOE) to quickly optimize immunoassays for precision and robustness on the Tecan EVO liquid handler. By using fractional factorials and a split-plot design, five incubation time variables and four reagent concentration variables can be optimized in a short period of time.

Design manual for low water stream crossings.

DOT National Transportation Integrated Search

1983-10-01

The purpose of this manual is to provide design guidelines for : low water stream crossings (LWSCs). Rigid criteria for determining the : applicability of a LWSC to a given site are not established since each : site is unique in terms of physical, so...

24 CFR 3282.204 - IPIA services.

Code of Federal Regulations, 2010 CFR

2010-04-01

... DEVELOPMENT MANUFACTURED HOME PROCEDURAL AND ENFORCEMENT REGULATIONS Manufacturer Inspection and Certification... DAPIA approved design and the quality assurance manual for that plant, and the IPIA shall perform an... to conform with the DAPIA approved designs and manuals. After the corrections required by the...

The Use and Design of Flightcrew Checklists and Manuals

DOT National Transportation Integrated Search

1991-04-01

A survey of aircraft checklists and flight manuals was conducted to identify : impediments to their use and to determine if standards or guidelines for. their : design were needed. Information for this purpose was collected through the review : of ch...

Ohio School Design Manual.

ERIC Educational Resources Information Center

Ohio School Facilities Commission, Columbus.

This manual presents guidance to facility designers, school administrators, staff, and students for the development of school facilities being constructed under Ohio's Classroom Facilities Assistance Program. It provides critical analysis of individual spaces and material/system components necessary for the construction of elementary and secondary…

Intelligent editor/printer enhancements

NASA Technical Reports Server (NTRS)

Woodfill, M. C.; Pheanis, D. C.

1983-01-01

Microprocessor support hardware, software, and cross assemblers relating to the Motorola 6800 and 6809 process systems were developed. Pinter controller and intelligent CRT development are discussed. The user's manual, design specifications for the MC6809 version of the intelligent printer controller card, and a 132-character by 64-line intelligent CRT display system using a Motorola 6809 MPU, and a one-line assembler and disassembler are provided.

Wood fueled boiler financial feasibility user's manual

Treesearch

Robert Govett; Scott Bowe; Terry Mace; Steve Hubbard; John (Rusty) Dramm; Richard Bergman

2005-01-01

“Wood Fueled Boiler Financial Feasibility” is a spreadsheet program designed for easy use on a personal computer. This program provides a starting point for interested parties to perform financial feasibility analysis of a steam boiler system for space heating or process heat. By allowing users to input the conditions applicable to their current or proposed fuel...

The Role of Community and School Groups in School Desegregation: Strategies for Crisis and Change.

ERIC Educational Resources Information Center

Patton, Richard H.; Laue, James H.

This manual was designed for community and school groups to aid them in clarifying their goals and selecting strategies for resolving issues related to school desegregation. After a brief review of the law, Part 1 reviews the major issues involved in the school desegregation process: quality education, white flight, middle-class minority flight,…

ROMI 4.0: Rough mill simulator 4.0 users manual

Treesearch

R. Edward Thomas; Timo Grueneberg; Urs Buehlmann

2015-01-01

The Rough MIll simulator (ROMI Version 4.0) is a computer software package for personal computers (PCs) that simulates current industrial practices for rip-first, chop-first, and rip and chop-first lumber processing. This guide shows how to set up the software; design, implement, and execute simulations; and examine the results. ROMI 4.0 accepts cutting bills with as...

Apollo Multiplexer operations manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, M.M.

1985-04-01

This report describes the operation of the the Apollo Multiplexer, a microprocessor based communications device designed to process data between an Apollo computer and up to four Gandalf PACXIV data switches. Details are given on overall operation, hardware, and troubleshooting. The reader should gain sufficient knowledge from this report to understand the operation of the multiplexer and effectively analyze and correct any problems that might occur.

A passive-solar design manual for the United States Navy

NASA Astrophysics Data System (ADS)

Wray, W. O.; Biehl, F. A.; Kosiewicz, C. E.; Miles, C. E.; Durlak, E. R.

1982-06-01

A passive solar design manual for single-family detached residences and dormitory-type buildings is developed. The design procedure employed in the manual is a simplification of the original monthly solar load ratio (SLR) method. The new SLR correlations involve a single constant for each system. The correlation constant appears as a scale factor permitting the use of a universal performance curve for all passive systems. Furthermore, by providing location-dependent correlations between the annual solar heating fraction (SHF) and the minimum monthly SHF, the need to perform an SLR calculation for each month of the heating season is eliminated.

Passive-solar design manual for the United States Navy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wray, W.O.; Biehl, F.A.; Kosiewicz, C.R.

1982-01-01

A passive solar design manual for single-family detached residences and dormitory-type buildings is being developed. The design procedure employed in the manual is a simplification of the original monthly solar load ratio (SLR) method. The new SLR correlations involve a single constant for each system. The correlation constant appears as a scale factor permitting the use of a universal performance curve for all passive systems. Furthermore, by providing location-dependent correlations between the annual solar heating fraction (SHF)* and the minimum monthly SHF, we have eliminated the need to perform an SLR calculation for each month of the heating season.

A Corrosion Control Manual for Rail Rapid Transit

NASA Technical Reports Server (NTRS)

Gilbert, L. O.; Fitzgerald, J. H., III; Menke, J. T.; Lizak, R. M. (Editor)

1982-01-01

This manual addresses corrosion problems in the design, contruction, and maintenance of rapid transit systems. Design and maintenance solutions are provided for each problem covered. The scope encompasses all facilities of urban rapid transit systems: structures and tracks, platforms and stations, power and signals, and cars. The types of corrosion and their causes as well as rapid transit properties are described. Corrosion control committees, and NASA, DOD, and ASTM specifications and design criteria to which reference is made in the manual are listed. A bibliography of papers and excerpts of reports is provided and a glossary of frequently used terms is included.

The Identification and Modeling of Visual Cue Usage in Manual Control Task Experiments

NASA Technical Reports Server (NTRS)

Sweet, Barbara Townsend; Trejo, Leonard J. (Technical Monitor)

1999-01-01

Many fields of endeavor require humans to conduct manual control tasks while viewing a perspective scene. Manual control refers to tasks in which continuous, or nearly continuous, control adjustments are required. Examples include flying an aircraft, driving a car, and riding a bicycle. Perspective scenes can arise through natural viewing of the world, simulation of a scene (as in flight simulators), or through imaging devices (such as the cameras on an unmanned aerospace vehicle). Designers frequently have some degree of control over the content and characteristics of a perspective scene; airport designers can choose runway markings, vehicle designers can influence the size and shape of windows, as well as the location of the pilot, and simulator database designers can choose scene complexity and content. Little theoretical framework exists to help designers determine the answers to questions related to perspective scene content. An empirical approach is most commonly used to determine optimum perspective scene configurations. The goal of the research effort described in this dissertation has been to provide a tool for modeling the characteristics of human operators conducting manual control tasks with perspective-scene viewing. This is done for the purpose of providing an algorithmic, as opposed to empirical, method for analyzing the effects of changing perspective scene content for closed-loop manual control tasks.

Role of Process Control in Improving Space Vehicle Safety A Space Shuttle External Tank Example

NASA Technical Reports Server (NTRS)

Safie, Fayssal M.; Nguyen, Son C.; Burleson, Keith W.

2006-01-01

Developing a safe and reliable space vehicle requires good design and good manufacturing, or in other words "design it right and build it right". A great design can be hard to build or manufacture mainly due to difficulties related to quality. Specifically, process control can be a challenge. As a result, the system suffers from low quality which leads to low reliability and high system risk. The Space Shuttle has experienced some of those cases, but has overcome these difficulties through extensive redesign efforts and process enhancements. One example is the design of the hot gas temperature sensor on the Space Shuttle Main Engine (SSME), which resulted in failure of the sensor in flight and led to a redesign of the sensor. The most recent example is the Space Shuttle External Tank (ET) Thermal Protection System (TPS) reliability issues that contributed to the Columbia accident. As a result, extensive redesign and process enhancement activities have been performed over the last two years to minimize the sensitivities and difficulties of the manual TPS application process.

The operations manual: a mechanism for improving the research process.

PubMed

Bowman, Ann; Wyman, Jean F; Peters, Jennifer

2002-01-01

The development and use of an operations manual has the potential to improve the capacity of nurse scientists to address the complex, multifaceted issues associated with conducting research in today's healthcare environment. An operations manual facilitates communication, standardizes training and evaluation, and enhances the development and standard implementation of clear policies, processes, and protocols. A 10-year review of methodology articles in relevant nursing journals revealed no attention to this topic. This article will discuss how an operations manual can improve the conduct of research methods and outcomes for both small-scale and large-scale research studies. It also describes the purpose and components of a prototype operations manual for use in quantitative research. The operations manual increases reliability and reproducibility of the research while improving the management of study processes. It can prevent costly and untimely delays or errors in the conduct of research.

Human Rights: Respecting Our Differences, Teachers' Manual [And] Human Rights: Respecting Our Differences, Students' Manual.

ERIC Educational Resources Information Center

McCardle, Elizabeth, Ed.

This unit on human rights designed for secondary students in Alberta, Canada includes both student and teacher manuals. Eleven chapters in the student manual examine what human rights are, the causes and effects of prejudice and discrimination, relevant laws, and social action. Each chapter includes readings followed by discussion questions and…

Topographic Map and Compass Use. A Teaching Packet to Supplement the Student Manual.

ERIC Educational Resources Information Center

Taylor, Michael

This teacher's manual is designed to supplement the student manual for a unit of study on topographic map and compass use. The beginning section of the manual discusses (1) teaching strategy and evaluation, (2) teaching time and facilities, (3) materials and equipment required, (4) suggested field experience, (5) setting up a compass competition,…

Wetlands & Wildlife: Alaska Wildlife Curriculum Teacher Information Manual, Parts I-II.

ERIC Educational Resources Information Center

Sigman, Marilyn; And Others

This document consists of a teacher manual and a set of information cards. The teacher manual is designed to educate Alaskan students about the important functions of Alaska's wetlands and about the fish and wildlife that live there. Part I of the manual explores Alaska's wetland habitats, the plants and animals that live there, and the…

Head Start Social Services Training Manual for Coordinators and Staff.

ERIC Educational Resources Information Center

Administration for Children, Youth, and Families (DHHS), Washington, DC. Head Start Bureau.

This training manual is designed for use by local Head Start programs in training current and new entry-level staff to deliver comprehensive social services to Head Start families. The introductory section of the manual provides an overview of Head Start, describes its social service component, and explains the organization of the manual. The…

Course Manual for X-Ray Measurements.

ERIC Educational Resources Information Center

Food and Drug Administration (DHEW), Rockville, MD. Bureau of Radiological Health.

This is the second of a series of three instructor manuals in x-ray science and engineering and is produced as part of a project of Oregon State University's Bureau of Radiological Health. This manual, and the two campanion manuals, have been tested in courses at Oregon State. These materials have been designed to serve as models for teaching and…

Design for Production Manual. Volume 2. Design/Production Integration

DTIC Science & Technology

1985-12-01

woodworking equipment such as circular saw, cross cut saw, planer / thicknesser and sander. There is considerable use of hand tools in the shop. Joinery inclucies...PROGRAM BY SOCIETY OF NAVAL ARCHITECTS AND MARINE ENGINEERS SHIP PRODUCTION COMMITTEE PANEL SP- 4 DESIGN PRODUCTION INTEGRATION CONTRACT DTMA91-82-C...DEC 1985 2. REPORT TYPE N/A 3. DATES COVERED - 4 . TITLE AND SUBTITLE Design for Production Manual Volume 2 of 3 Design/Production

Architectural study of the design and operation of advanced force feedback manual controllers

NASA Technical Reports Server (NTRS)

Tesar, Delbert; Kim, Whee-Kuk

1990-01-01

A teleoperator system consists of a manual controller, control hardware/software, and a remote manipulator. It was employed in either hazardous or unstructured, and/or remote environments. In teleoperation, the main-in-the-loop is the central concept that brings human intelligence to the teleoperator system. When teleoperation involves contact with an uncertain environment, providing the feeling of telepresence to the human operator is one of desired characteristics of the teleoperator system. Unfortunately, most available manual controllers in bilateral or force-reflecting teleoperator systems can be characterized by their bulky size, high costs, or lack of smoothness and transparency, and elementary architectures. To investigate other alternatives, a force-reflecting, 3 degree of freedom (dof) spherical manual controller is designed, analyzed, and implemented as a test bed demonstration in this research effort. To achieve an improved level of design to meet criteria such as compactness, portability, and a somewhat enhanced force-reflecting capability, the demonstration manual controller employs high gear-ratio reducers. To reduce the effects of the inertia and friction on the system, various force control strategies are applied and their performance investigated. The spherical manual controller uses a parallel geometry to minimize inertial and gravitational effects on its primary task of transparent information transfer. As an alternative to the spherical 3-dof manual controller, a new conceptual (or parallel) spherical 3-dof module is introduced with a full kinematic analysis. Also, the resulting kinematic properties are compared to those of other typical spherical 3-dof systems. The conceptual design of a parallel 6-dof manual controller and its kinematic analysis is presented. This 6-dof manual controller is similar to the Stewart Platform with the actuators located on the base to minimize the dynamic effects. Finally, a combination of the new 3-dof and 6-dof concepts is presented as a feasible test-bed for enhanced performance in a 9-dof system.

Toward evidence-based interventions for diverse populations: The San Francisco General Hospital prevention and treatment manuals.

PubMed

Muñoz, Ricardo F; Mendelson, Tamar

2005-10-01

Clinical trials have seldom included adequate samples of people of color. Therefore, practitioners serving ethnic minorities often do not have access to readily available evidence-based interventions. This article summarizes the development and empirical evaluation of prevention and treatment manuals designed for low-income ethnic minority populations at San Francisco General Hospital. The manuals were often designed by people of color familiar with the communities for which they were developed. Independent research teams in multi-site national and international clinical trials have evaluated many of these manuals with encouraging results. ((c) 2005 APA, all rights reserved).

Flexible pavement overlay design procedures. Volume 2: User manual

NASA Astrophysics Data System (ADS)

Majidzadeh, K.; Ilves, G. J.

1981-08-01

This user manual outlines a procedure for the design of asphaltic concrete overlays on existing asphaltic concrete pavement surfaces. It is intended as a guide to the user on the type and form of information required as input to the procedure and contains all elements necessary for the user to prepare designs for flexible pavement overlays.

A Training Manual in Conducting a Workshop in the Design, Construction, Operation, Maintenance and Repair of Hydrams.

ERIC Educational Resources Information Center

Peace Corps, Washington, DC. Office of Programming and Training Coordination.

This manual presents a comprehensive training design, suggested procedures, and materials for conducting a workshop in the design, construction, operation, maintenance, and repair of hydrams, and in the planning and implementation of hydram projects. Hydrams (hydraulic rams, hydraulic ram pumps, automatic hydraulic ram pumps, rams) are devices…

Catch and Patch: A Pipette-Based Approach for Automating Patch Clamp That Enables Cell Selection and Fast Compound Application.

PubMed

Danker, Timm; Braun, Franziska; Silbernagl, Nikole; Guenther, Elke

2016-03-01

Manual patch clamp, the gold standard of electrophysiology, represents a powerful and versatile toolbox to stimulate, modulate, and record ion channel activity from membrane fragments and whole cells. The electrophysiological readout can be combined with fluorescent or optogenetic methods and allows for ultrafast solution exchanges using specialized microfluidic tools. A hallmark of manual patch clamp is the intentional selection of individual cells for recording, often an essential prerequisite to generate meaningful data. So far, available automation solutions rely on random cell usage in the closed environment of a chip and thus sacrifice much of this versatility by design. To parallelize and automate the traditional patch clamp technique while perpetuating the full versatility of the method, we developed an approach to automation, which is based on active cell handling and targeted electrode placement rather than on random processes. This is achieved through an automated pipette positioning system, which guides the tips of recording pipettes with micrometer precision to a microfluidic cell handling device. Using a patch pipette array mounted on a conventional micromanipulator, our automated patch clamp process mimics the original manual patch clamp as closely as possible, yet achieving a configuration where recordings are obtained from many patch electrodes in parallel. In addition, our implementation is extensible by design to allow the easy integration of specialized equipment such as ultrafast compound application tools. The resulting system offers fully automated patch clamp on purposely selected cells and combines high-quality gigaseal recordings with solution switching in the millisecond timescale.

Locomotive cab design development. volume 2 : operator's manual - Interim Report

DOT National Transportation Integrated Search

1976-10-01

Locomotive Cab 913 designed as a result of Contract DOT-TSC- 913 has been built as a hard mock-up. This Operator's Manual is to familiarize the user with the mock-up. Normal and emergency procedures and cab facilities are described.

STORAGE/SEDIMENTATION FACILITIES FOR CONTROL OF STORM AND COMBINED SEWER OVERFLOW: DESIGN MANUAL

EPA Science Inventory

This manual describes applications of storage facilities in wet-weather flow management and presents step-by-step procedures for analysis and design of storage-treatment facilities. Retention, detention, and sedimentation storage information is classified and described. Internati...

Architecture earth-sheltered buildings: Design Manual 1.4

NASA Astrophysics Data System (ADS)

1984-03-01

Design guidance is presented for use by experienced engineers and architects. The types of buildings within the scope of this manual include slab-on-grade, partially-buried (bermed) or fully-buried, and large (single-story or multistory) structures. New criteria unique to earth-sheltered design are included for the following disciplines: Planning, Landscape Design, Life-Cycle Analysis, Architectural, Structural, Mechanical (criteria include below-grade heat flux calculation procedures), and Electrical.

Semiautomated, Reproducible Batch Processing of Soy

NASA Technical Reports Server (NTRS)

Thoerne, Mary; Byford, Ivan W.; Chastain, Jack W.; Swango, Beverly E.

2005-01-01

A computer-controlled apparatus processes batches of soybeans into one or more of a variety of food products, under conditions that can be chosen by the user and reproduced from batch to batch. Examples of products include soy milk, tofu, okara (an insoluble protein and fiber byproduct of soy milk), and whey. Most processing steps take place without intervention by the user. This apparatus was developed for use in research on processing of soy. It is also a prototype of other soy-processing apparatuses for research, industrial, and home use. Prior soy-processing equipment includes household devices that automatically produce soy milk but do not automatically produce tofu. The designs of prior soy-processing equipment require users to manually transfer intermediate solid soy products and to press them manually and, hence, under conditions that are not consistent from batch to batch. Prior designs do not afford choices of processing conditions: Users cannot use previously developed soy-processing equipment to investigate the effects of variations of techniques used to produce soy milk (e.g., cold grinding, hot grinding, and pre-cook blanching) and of such process parameters as cooking times and temperatures, grinding times, soaking times and temperatures, rinsing conditions, and sizes of particles generated by grinding. In contrast, the present apparatus is amenable to such investigations. The apparatus (see figure) includes a processing tank and a jacketed holding or coagulation tank. The processing tank can be capped by either of two different heads and can contain either of two different insertable mesh baskets. The first head includes a grinding blade and heating elements. The second head includes an automated press piston. One mesh basket, designated the okara basket, has oblong holes with a size equivalent to about 40 mesh [40 openings per inch (.16 openings per centimeter)]. The second mesh basket, designated the tofu basket, has holes of 70 mesh [70 openings per inch (.28 openings per centimeter)] and is used in conjunction with the press-piston head. Supporting equipment includes a soy-milk heat exchanger for maintaining selected coagulation temperatures, a filter system for separating okara from other particulate matter and from soy milk, two pumps, and various thermocouples, flowmeters, level indicators, pressure sensors, valves, tubes, and sample ports

Automated identification of cone photoreceptors in adaptive optics retinal images.

PubMed

Li, Kaccie Y; Roorda, Austin

2007-05-01

In making noninvasive measurements of the human cone mosaic, the task of labeling each individual cone is unavoidable. Manual labeling is a time-consuming process, setting the motivation for the development of an automated method. An automated algorithm for labeling cones in adaptive optics (AO) retinal images is implemented and tested on real data. The optical fiber properties of cones aided the design of the algorithm. Out of 2153 manually labeled cones from six different images, the automated method correctly identified 94.1% of them. The agreement between the automated and the manual labeling methods varied from 92.7% to 96.2% across the six images. Results between the two methods disagreed for 1.2% to 9.1% of the cones. Voronoi analysis of large montages of AO retinal images confirmed the general hexagonal-packing structure of retinal cones as well as the general cone density variability across portions of the retina. The consistency of our measurements demonstrates the reliability and practicality of having an automated solution to this problem.

Onboard Classifiers for Science Event Detection on a Remote Sensing Spacecraft

NASA Technical Reports Server (NTRS)

Castano, Rebecca; Mazzoni, Dominic; Tang, Nghia; Greeley, Ron; Doggett, Thomas; Cichy, Ben; Chien, Steve; Davies, Ashley

2006-01-01

Typically, data collected by a spacecraft is downlinked to Earth and pre-processed before any analysis is performed. We have developed classifiers that can be used onboard a spacecraft to identify high priority data for downlink to Earth, providing a method for maximizing the use of a potentially bandwidth limited downlink channel. Onboard analysis can also enable rapid reaction to dynamic events, such as flooding, volcanic eruptions or sea ice break-up. Four classifiers were developed to identify cryosphere events using hyperspectral images. These classifiers include a manually constructed classifier, a Support Vector Machine (SVM), a Decision Tree and a classifier derived by searching over combinations of thresholded band ratios. Each of the classifiers was designed to run in the computationally constrained operating environment of the spacecraft. A set of scenes was hand-labeled to provide training and testing data. Performance results on the test data indicate that the SVM and manual classifiers outperformed the Decision Tree and band-ratio classifiers with the SVM yielding slightly better classifications than the manual classifier.

Low-cost real-time automatic wheel classification system

NASA Astrophysics Data System (ADS)

Shabestari, Behrouz N.; Miller, John W. V.; Wedding, Victoria

1992-11-01

This paper describes the design and implementation of a low-cost machine vision system for identifying various types of automotive wheels which are manufactured in several styles and sizes. In this application, a variety of wheels travel on a conveyor in random order through a number of processing steps. One of these processes requires the identification of the wheel type which was performed manually by an operator. A vision system was designed to provide the required identification. The system consisted of an annular illumination source, a CCD TV camera, frame grabber, and 386-compatible computer. Statistical pattern recognition techniques were used to provide robust classification as well as a simple means for adding new wheel designs to the system. Maintenance of the system can be performed by plant personnel with minimal training. The basic steps for identification include image acquisition, segmentation of the regions of interest, extraction of selected features, and classification. The vision system has been installed in a plant and has proven to be extremely effective. The system properly identifies the wheels correctly up to 30 wheels per minute regardless of rotational orientation in the camera's field of view. Correct classification can even be achieved if a portion of the wheel is blocked off from the camera. Significant cost savings have been achieved by a reduction in scrap associated with incorrect manual classification as well as a reduction of labor in a tedious task.

New Mexico Response to Intervention Framework Manual

ERIC Educational Resources Information Center

New Mexico Public Education Department, 2014

2014-01-01

This manual details the instructional framework and guidance on the Response to Intervention (RtI) process in New Mexico. The manual includes: (1) a section on each of the three instructional tiers; (2) a glossary of key terms; (3) sample forms to assist with the Student Assistance Team (SAT) process; and (4) key resources for teachers.

Assessing the economics of processing end-of-life vehicles through manual dismantling.

PubMed

Tian, Jin; Chen, Ming

2016-10-01

Most dismantling enterprises in a number of developing countries, such as China, usually adopt the "manual+mechanical" dismantling approach to process end-of-life vehicles. However, the automobile industry does not have a clear indicator to reasonably and effectively determine the manual dismantling degree for end-of-life vehicles. In this study, five different dismantling scenarios and an economic system for end-of-life vehicles were developed based on the actual situation of end-of-life vehicles. The fuzzy analytic hierarchy process was applied to set the weights of direct costs, indirect costs, and sales and to obtain an optimal manual dismantling scenario. Results showed that although the traditional method of "dismantling to the end" can guarantee the highest recycling rate, this method is not the best among all the scenarios. The profit gained in the optimal scenario is 100.6% higher than that in the traditional scenario. The optimal manual dismantling scenario showed that enterprises are required to select suitable parts to process through manual dismantling. Selecting suitable parts maximizes economic profit and improves dismantling speed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Manual handling of highway kerbs--focus group findings.

PubMed

Bust, P D; Gibb, A G F; Haslam, R A

2005-07-01

The manual handling of concrete highway kerbs remains commonplace in the construction industry despite obvious risks to operatives. This study was undertaken to find out why kerb installation still includes manual handling, to identify the alternatives that exist and to consider how the organisation of the work affects exposure to risk. Focus groups were held with industry professionals to discuss kerb design, installation and the training of operatives, with site visits and interviews undertaken to place the focus group findings in context. The focus group discussions highlighted manufacturer's "myopia", a lack of installation knowledge of designers and shortfalls in training for installation work. It was concluded that risks to the health of construction workers remain as they are not considered in the design of the product, design of the work or ameliorated by adequate risk assessment. Recommendations from the research are that a pro-active approach to health needs to be adopted by the manufacturers of heavy construction products. Designers of work requiring the use of heavy products need to have more experience of site operations, and education and training in manual handling is desirable at all levels in construction organisations.

SHAWNEE LIME/LIMESTONE SCRUBBING COMPUTERIZED DESIGN/COST-ESTIMATE MODEL USERS MANUAL

EPA Science Inventory

The manual gives a general description of the Shawnee lime/limestone scrubbing computerized design/cost-estimate model and detailed procedures for using it. It describes all inputs and outputs, along with available options. The model, based on Shawnee Test Facility scrubbing data...

Dental Laboratory Technology.

ERIC Educational Resources Information Center

Department of the Air Force, Washington, DC.

The Air Force dental laboratory technology manual is designed as a basic training text as well as a reference source for dental laboratory technicians, a specialty occupation concerned with the design, fabrication, and repair of dental prostheses. Numerous instructive diagrams and photographs are included throughout the manual. The comprehensive…

Cuerpo de Paz Manual de Sistema de Programacion y Capacitacion (Peace Corps Programming and Training System Manual): T0063.

ERIC Educational Resources Information Center

Peace Corps, Washington, DC.

This Spanish version of the Peace Corps Programming and Training System Manual is designed to help field staff members of the Peace Corps train volunteers. Its task descriptions, guidelines, examples, and definitions are intended to be practical and informative rather than restrictive. The manual is divided into six major sections: (1)…

Guidelines for Writing the Director's Manual for a Simulation Game.

ERIC Educational Resources Information Center

Fennessey, Gail M.

The Director's Manual is an important part of any simulation game. This paper provides an outline that will help the game designer prepare a well-organized and effective manual. Six sections that should be in the manual are discussed: the overview of the game, preparing for the game session, the game session, debriefing the game (the post game…

Dialects for the Stage: A Manual and Two Casette Tapes.

ERIC Educational Resources Information Center

Machlin, Evangeline

This document contains a manual and two cassette tapes designed to help actors and actresses learn to speak various dialects. The tapes and the manual are arranged for the play-it-and-say-it method of dialect acquisition. The first three parts discuss the tapes and the manual in general, the dialect texts and dialect data, and the steps involved…

An Introduction to the Consumer's Society. An Instruction Manual with Resources for Teaching Limited-English Speaking Students. Consumer Education, Nutrition, Parenting.

ERIC Educational Resources Information Center

Antonelli, Sharon

These three instruction manuals are designed as aids for faculty and staff teaching consumer education, nutrition, and parenting. They include resources for teaching limited English speaking students. A 17-page Vocational English as a Second Language (VESL) annotated bibliography precedes the instruction manuals. Each manual consists of 18 units.…

Anger Management for Substance Abuse and Mental Health Clients: A Cognitive Behavioral Therapy Manual [and] Participant Workbook.

ERIC Educational Resources Information Center

Reilly, Patrick M.; Shopshire, Michael S.; Durazzo, Timothy C.; Campbell, Torri A.

This manual and workbook set focuses on anger management. The manual was designed for use by qualified substance abuse and mental health clinicians who work with substance abuse and mental health clients with concurrent anger programs. The manual describes a 12-week cognitive behavioral anger management group treatment. Each of the 12 90-minute…

Manufacturing process design for multi commodities in agriculture

NASA Astrophysics Data System (ADS)

Prasetyawan, Yudha; Santosa, Andrian Henry

2017-06-01

High-potential commodities within particular agricultural sectors should be accompanied by maximum benefit value that can be attained by both local farmers and business players. In several cases, the business players are small-medium enterprises (SMEs) which have limited resources to perform added value process of the local commodities into the potential products. The weaknesses of SMEs such as the manual production process with low productivity, limited capacity to maintain prices, and unattractive packaging due to conventional production. Agricultural commodity is commonly created into several products such as flour, chips, crackers, oil, juice, and other products. This research was initiated by collecting data by interview method particularly to obtain the perspectives of SMEs as the business players. Subsequently, the information was processed based on the Quality Function Deployment (QFD) to determine House of Quality from the first to fourth level. A proposed design as the result of QFD was produced and evaluated with Technology Assessment Model (TAM) and continued with a revised design. Finally, the revised design was analyzed with financial perspective to obtain the cost structure of investment, operational, maintenance, and workers. The machine that performs manufacturing process, as the result of revised design, was prototyped and tested to determined initial production process. The designed manufacturing process offers IDR 337,897, 651 of Net Present Value (NPV) in comparison with the existing process value of IDR 9,491,522 based on similar production input.

Automating expert role to determine design concept in Kansei Engineering

NASA Astrophysics Data System (ADS)

Lokman, Anitawati Mohd; Haron, Mohammad Bakri Che; Abidin, Siti Zaleha Zainal; Khalid, Noor Elaiza Abd

2016-02-01

Affect has become imperative in product quality. In affective design field, Kansei Engineering (KE) has been recognized as a technology that enables discovery of consumer's emotion and formulation of guide to design products that win consumers in the competitive market. Albeit powerful technology, there is no rule of thumb in its analysis and interpretation process. KE expertise is required to determine sets of related Kansei and the significant concept of emotion. Many research endeavors become handicapped with the limited number of available and accessible KE experts. This work is performed to simulate the role of experts with the use of Natphoric algorithm thus providing sound solution to the complexity and flexibility in KE. The algorithm is designed to learn the process by implementing training datasets taken from previous KE research works. A framework for automated KE is then designed to realize the development of automated KE system. A comparative analysis is performed to determine feasibility of the developed prototype to automate the process. The result shows that the significant Kansei is determined by manual KE implementation and the automated process is highly similar. KE research advocates will benefit this system to automatically determine significant design concepts.

OPERATION AND MAINTENANCE MANUAL FOR ELECTROSTATIC PRECIPITATORS

EPA Science Inventory

The manual focuses on the operation and maintenance (O/M) of typical electrostatic precipitators (ESPs). It summarizes available information on theory and design in sufficient detail to provide a basic background O/M portions of the manual. Although O/M-related air pollution prob...

How to Write Effective Procedure Manuals.

ERIC Educational Resources Information Center

Wold, Geoffrey H.

1987-01-01

Describes six key guidelines for developing usable procedure manuals, including defining the audience; designing a standard format; preparing an outline; using a clear, concise writing style; testing the procedures; and "finalizing" the product with indices, glossaries, appendices, and section tabs. Well-written manuals can increase…

MANUAL: GROUND-WATER AND LEACHATE TREATMENT SYSTEMS

EPA Science Inventory

This manual was developed for remedial design engineers and regulatory personnel who oversee the ex situ ground water or leachate treatment efforts of the regulated community. The manual can be used as a treatment technology screening tool in conjunction with other references. Mo...

VDOT manual of practice for planning stormwater management.

DOT National Transportation Integrated Search

1992-01-01

The final report is in the form of a manual of practice for the VDOT to use in planning its stormwater management strategies. The manual was proposed to aid in the selection and design of erosion control practices and stormwater control practices for...

ONSITE WASTEWATER TREATMENT SYSTEMS MANUAL - REVISED FEBRUARY 2002

EPA Science Inventory

This update of the 1980 Design Manual: Onsite Wastewater Treatment and Disposal Systems was developed to provide supplemental and new information for wastewater treatment professionals in both the public and private sectors. This manual is not intended to replace the previous man...

An ℋ∞ full information approach for the feedforward controller design of a large blended wing body flexible aircraft

NASA Astrophysics Data System (ADS)

Westermayer, C.; Schirrer, A.; Hemedi, M.; Kozek, M.

2013-12-01

An ℋ∞ full information feedforward design approach for longitudinal motion prefilter design of a large flexible blended wing body (BWB) aircraft is presented. An existing onset is extended such that specifications concerning command tracking, limited control energy, and manoeuvre load reduction can be addressed simultaneously. Therefore, the utilized design architecture is provided and manual tuning aspects are considered. In order to increase controller tuning efficiency, an automated tuning process based on several optimization criteria is proposed. Moreover, two design methodologies for the parameter-varying design case are investigated. The obtained controller is validated on a high-order nonlinear model, indicating the high potential of the presented approach for flexible aircraft control.

Un Marco Abierto: Un Manual de Matematicas y Ciencas Utilizando Inteligencias Multiples Disenado para Estudiantes Bilingues de Educacion General y Especial (An Open Framework: A Math and Science Manual Utilizing Multiple Intelligences Designed for Bilingual Students in General and Special Education).

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Office of Bilingual Education.

This manual incorporates a Multiple Intelligences perspective into its presentation of themes and lesson ideas for Spanish-English bilingual elementary school students in grades 4-8 and is designed for both gifted and special education uses. Each unit includes practice activities, semantic maps to illustrate and help organize ideas as well as…

Interfacing Computer-Assisted Drafting and Design with the Building Loads Analysis and System Thermodynamics (BLAST) Program

DTIC Science & Technology

1992-10-01

Manual CI APPENDIX D: Drawing Navigator Field Test D1 DISTRIBUTION Accesion For NTIS CRA&I OTIC TAB Unannouncea JustiteCdtOn By Distribution I "".i•I...methods replace manual methods, the automation will handle the data for the designer, thus reducing error and increasing throughput. However, the two...actively move data from one automation tool (CADD) to the other (the analysis program). This intervention involves a manual rekeying of data already in

AIS training manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kramer, C.F.; Barancik, J.I.

1989-05-01

This Training Manual was developed by the Injury Prevention and Analysis Group (IPAG) as part of a training program in AIS 85 and AIS-EM (Epidemiological Modifications) coding. The IPAG Program is designed primarily to train medical record and other health professionals from diverse backgrounds and experience levels in the use of AIS 85 and AIS 85-EM. The Manual is designed to be used as a reference text after completion of the Program and includes copies of visual projection materials used during the training sessions.

Small Scale Irrigation Systems: A Training Manual. Planning--Construction--Operation and Maintenance of Small Scale Irrigation Systems. A Two-Week In-Service Training Program for Peace Corps Volunteers. Training for Development. Peace Corps Information Collection & Exchange Training Manual No. T-13.

ERIC Educational Resources Information Center

Development Planning and Research Associates, Inc., Manhattan, KS.

This manual provides materials for a two-week inservice training program for Peace Corps volunteers on the planning, construction, and operation and maintenance of small-scale irrigation systems. The workshop is designed to be given by two experienced professionals: one with practical knowledge of irrigation system design, operation, and…

Software Manuals: Where Instructional Design and Technical Writing Join Forces.

ERIC Educational Resources Information Center

Thurston, Walter, Ed.

1986-01-01

Presents highlights from a panel discussion by well known San Francisco Bay area documentation writers, instructional designers, and human performance technologists. Three issues on user performance and documentation are addressed: whether people avoid reading user manuals and why; major human factors influencing documentation use; and…

Air Controlman 1 & C: Rate Training Manual.

ERIC Educational Resources Information Center

Naval Training Command, Pensacola, FL.

The manual is designed for use in preparing for advancement within the Navy Air Controlman rating, which designates a professional air traffic controller, unlike the more specialized center or tower controllers. However, minimum qualifications for the rating include completion of the Federal Aviation Administration (FAA) written examination for…

Linking Law to Learning: Instructional Strategies Manual.

ERIC Educational Resources Information Center

Hoffman, Alan, Ed.; Moon, Jeannette B., Ed.

Designed to assist secondary teachers and school systems in classroom instruction, in staff development workshops, and in curriculum design, this manual contains classroom and resource materials that have proven useful in teaching legal education. Although developed specifically for educators in Georgia, the activities can easily be used by…

ONSITE WASTEWATER TREATMENT AND DISPOSAL SYSTEMS (1980 EDITION) AND ONSITE WASTEWATER TREATMENT SYSTEMS MANUAL (2002 EDITION)

EPA Science Inventory

The U.S. Environmental Protection Agency (USEPA) first issued detailed guidance on the design, construction, and operation of onsite wastewater treatment systems (OWTSs) in 1980. Design Manual: Onsite Wastewater Treatment and Disposal Systems (USEPA.1980) was the most comprehens...

Training of Trainers: Trainer Manual.

ERIC Educational Resources Information Center

University Research Corp., Bethesda, MD.

This manual is designed to train individuals to deliver courses developed within the National Training System of the National Institute on Drug Abuse (NIDA). The training guide, describes the content and activities that constitute training delivery, identifies behaviors and skills associated with training delivery, elaborates on program design and…

Sensitometric comparisons of Insight and Ektaspeed Plus films: effects of chemical developer depletion.

PubMed

Casanova, Marcia Spinelli; Haiter-Neto, Francisco; Bóscolo, Frab Norberto; de Almeida, Solange Maria

2006-01-01

The aim of this study was to compare the sensitometric properties of Insight and Ektaspeed Plus radiographic films manually and automatically processed using fresh and depleted chemical solutions. Ten sets of each type of film were obtained (1 set = 5 films), 5 sets being manually processed and 5 sets being automatically processed. A total of 100 films (50 Ektaspeed Plus and 50 Insight film) were exposed and developed. The first two sets of each film type were developed in fresh chemicals (one set per each type of processing), on the first day of the experiment. The other sets were processed in the same progressively depleted solutions once a week until the end of experiment, which was completed within 4 weeks. Characteristic curves were constructed to compare the sensitometric properties of the films: contrast, latitude and speed. Processing solution depletion had different effects on manually and automatically developed films, which was confirmed by the changes in the form of the characteristic curves in the third week of the automatic processing and fourth week of the manual processing. Ektaspeed Plus showed 11% reduction in contrast values for manual processing and 53% for automatic processing, while Insight contrast values showed a reduction of 25% and 59%, respectively. Insight film, however, showed lesser loss of speed and lesser increase of latitude than Ektaspeed Plus. In conclusion, chemical depletion in automatic film processing was faster than in manual developing. In depleted chemicals, both types of films had an increase in latitude values and a decrease in speed and contrast. Insight was more resistant than Ektaspeed Plus to decrease in speed and latitude when processed using older chemicals, whereas contrast in Ektaspeed Plus was comparatively more stable.

Design of an intelligent instrument for large direct-current measurement

NASA Astrophysics Data System (ADS)

Zhang, Rong; Zhang, Gang; Zhang, Zhipeng

2000-05-01

The principle and structure of an intelligent large direct current measurement is presented in this paper. It is of reflective type and detects signal by employing the high direct current sensor. The single-chip microcomputer of this system provides a powerful function of control and processing and greatly improves the extent of intelligence. The value can be displayed and printed automatically or manually.

Program Synthesizes UML Sequence Diagrams

NASA Technical Reports Server (NTRS)

Barry, Matthew R.; Osborne, Richard N.

2006-01-01

A computer program called "Rational Sequence" generates Universal Modeling Language (UML) sequence diagrams of a target Java program running on a Java virtual machine (JVM). Rational Sequence thereby performs a reverse engineering function that aids in the design documentation of the target Java program. Whereas previously, the construction of sequence diagrams was a tedious manual process, Rational Sequence generates UML sequence diagrams automatically from the running Java code.

Environmental Scanning for Occupational Education. A Facilitator's Guide. A Model for Environmental Scanning to Systematically Assess Future Occupational Education and Training Needs of a Michigan Community College Service Area.

ERIC Educational Resources Information Center

Kellogg Foundation, Battle Creek, MI.

This manual is designed to facilitate the planning and implementation of an environmental scanning project in Michigan's community colleges. (Environmental scanning is a systematic process for gathering and analyzing information about the external environment and relating it to an organization's internal environment.) This facilitator's guide is…

Affinity+: Semi-Structured Brainstorming on Large Displays

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burtner, Edwin R.; May, Richard A.; Scarberry, Randall E.

2013-04-27

Affinity diagraming is a powerful method for encouraging and capturing lateral thinking in a group environment. The Affinity+ Concept was designed to improve the collaborative brainstorm process through the use of large display surfaces in conjunction with mobile devices like smart phones and tablets. The system works by capturing the ideas digitally and allowing users to sort and group them on a large touch screen manually. Additionally, Affinity+ incorporates theme detection, topic clustering, and other processing algorithms that help bring structured analytic techniques to the process without requiring explicit leadership roles and other overhead typically involved in these activities.

Manual control models of industrial management

NASA Technical Reports Server (NTRS)

Crossman, E. R. F. W.

1972-01-01

The industrial engineer is often required to design and implement control systems and organization for manufacturing and service facilities, to optimize quality, delivery, and yield, and minimize cost. Despite progress in computer science most such systems still employ human operators and managers as real-time control elements. Manual control theory should therefore be applicable to at least some aspects of industrial system design and operations. Formulation of adequate model structures is an essential prerequisite to progress in this area; since real-world production systems invariably include multilevel and multiloop control, and are implemented by timeshared human effort. A modular structure incorporating certain new types of functional element, has been developed. This forms the basis for analysis of an industrial process operation. In this case it appears that managerial controllers operate in a discrete predictive mode based on fast time modelling, with sampling interval related to plant dynamics. Successive aggregation causes reduced response bandwidth and hence increased sampling interval as a function of level.

Institutional Transformation 2.5 Building Module Help Manual.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Villa, Daniel

The Institutional Transformation (IX) building module is a software tool developed at Sandia National Laboratories to evaluate energy conservation measures (ECMs) on hundreds of DOE-2 building energy models simultaneously. In IX, ECMs can be designed through parameterizing DOE-2 building models and doing further processing via visual basic for applications subroutines. IX provides the functionality to handle multiple building models for different years, which enables incrementally changing a site of hundreds of buildings over time. It also enables evaluation of the effects of changing climate, comparisons between data and modeling results, and energy use of centralized utility buildings (CUBs). IX consistsmore » of a Microsoft Excel(r) user interface, Microsoft Access(r) database, and Microsoft Excel(r) CUB build utility whose functionalities are described in detail in this report. In addition to descriptions of the user interfaces, descriptions of every ECM already designed in IX is included. SAND2016-8983 IX 2.5 Help Manual« less

Software Users Manual (SUM): Extended Testability Analysis (ETA) Tool

NASA Technical Reports Server (NTRS)

Maul, William A.; Fulton, Christopher E.

2011-01-01

This software user manual describes the implementation and use the Extended Testability Analysis (ETA) Tool. The ETA Tool is a software program that augments the analysis and reporting capabilities of a commercial-off-the-shelf (COTS) testability analysis software package called the Testability Engineering And Maintenance System (TEAMS) Designer. An initial diagnostic assessment is performed by the TEAMS Designer software using a qualitative, directed-graph model of the system being analyzed. The ETA Tool utilizes system design information captured within the diagnostic model and testability analysis output from the TEAMS Designer software to create a series of six reports for various system engineering needs. The ETA Tool allows the user to perform additional studies on the testability analysis results by determining the detection sensitivity to the loss of certain sensors or tests. The ETA Tool was developed to support design and development of the NASA Ares I Crew Launch Vehicle. The diagnostic analysis provided by the ETA Tool was proven to be valuable system engineering output that provided consistency in the verification of system engineering requirements. This software user manual provides a description of each output report generated by the ETA Tool. The manual also describes the example diagnostic model and supporting documentation - also provided with the ETA Tool software release package - that were used to generate the reports presented in the manual

Livestock Nutrition and Feeding. Student Manual. Second Edition.

ERIC Educational Resources Information Center

Ridenour, Harlan E.

This manual is designed to help agricultural education students and teachers to apply scientific facts and principles to problem-solving procedures in determining nutritious and economical livestock feeding programs. The manual provides applied scientific activities in biological science and chemistry, mathematics, and communication skills. It…

Miami University Information Manual.

ERIC Educational Resources Information Center

Miami Univ., Oxford, OH.

The 1975 information manual is designed to provide current data on policies, procedures, services, facilities, organization and governance of Miami University and, through the extensive index, quick access to this information. The manual is complementary to the university catalog and directory. Information relating to students is in the Student…

Action Research Projects in Distance Education: A Manual.

ERIC Educational Resources Information Center

Ramakrishna, C. Pushpa; Prasad, V. S.

This manual, prepared by the Distance Education Council (India) presents guidelines for action research in distance education, balancing practical research activities with a sound theoretical research base. Chapter 1, "Scope, Purpose and Design of the Manual," suggests several definitions of research; draws distinctions between academic…

Terminology Manual.

ERIC Educational Resources Information Center

Felber, Helmut

A product of the International Information Center for Terminology (Infoterm), this manual is designed to serve as a reference tool for practitioners active in terminology work and documentation. The manual explores the basic ideas of the Vienna School of Terminology and explains developments in the area of applied computer aided terminography…

Extended parametric representation of compressor fans and turbines. Volume 2: Part user's manual (parametric turbine)

NASA Technical Reports Server (NTRS)

Coverse, G. L.

1984-01-01

A turbine modeling technique has been developed which will enable the user to obtain consistent and rapid off-design performance from design point input. This technique is applicable to both axial and radial flow turbine with flow sizes ranging from about one pound per second to several hundred pounds per second. The axial flow turbines may or may not include variable geometry in the first stage nozzle. A user-specified option will also permit the calculation of design point cooling flow levels and corresponding changes in efficiency for the axial flow turbines. The modeling technique has been incorporated into a time-sharing program in order to facilitate its use. Because this report contains a description of the input output data, values of typical inputs, and example cases, it is suitable as a user's manual. This report is the second of a three volume set. The titles of the three volumes are as follows: (1) Volume 1 CMGEN USER's Manual (Parametric Compressor Generator); (2) Volume 2 PART USER's Manual (Parametric Turbine); (3) Volume 3 MODFAN USER's Manual (Parametric Modulation Flow Fan).

Micro-based fact collection tool user's manual

NASA Technical Reports Server (NTRS)

Mayer, Richard

1988-01-01

A procedure designed for use by an analyst to assist in the collection and organization of data gathered during the interview processes associated with system analysis and modeling task is described. The basic concept behind the development of this tool is that during the interview process an analyst is presented with assertions of facts by the domain expert. The analyst also makes observations of the domain. These facts need to be collected and preserved in such a way as to allow them to serve as the basis for a number of decision making processes throughout the system development process. This tool can be thought of as a computerization of the analysts's notebook.

The implementation of the integrated design process in the hole-plan system

NASA Astrophysics Data System (ADS)

Ruy, Won-Sun; Ko, Dae-Eun; Yang, Young-Soon

2012-12-01

All current shipyards are using the customized CAD/CAM programs in order to improve the design quality and increase the design efficiency. Even though the data structures for ship design and construction are almost completed, the implementation related to the ship design processes are still in progress so that it has been the main causes of the bottleneck and delay during the middle of design process. In this study, we thought that the hole-plan system would be a good example which is remained to be improved. The people of outfitting division who don't have direct authority to edit the structural panels, should request the hull design division to install the holes for the outfitting equipment. For acceptance, they should calculate the hole position, determine the hole type, and find the intersected contour of panel. After consideration of the hull people, the requested holes are manually installed on the hull structure. As the above, many processes are needed such as communication and discussion between the divisions, drawings for hole-plan, and the consideration for the structural or production compatibility. However this iterative process takes a lot of working time and requires mental pressure to the related people and cross-division conflict. This paper will handle the hole-plan system in detail to automate the series of process and minimize the human efforts and time-consumption.

Instruct coders' manual

NASA Technical Reports Server (NTRS)

Friend, J.

1971-01-01

A manual designed both as an instructional manual for beginning coders and as a reference manual for the coding language INSTRUCT, is presented. The manual includes the major programs necessary to implement the teaching system and lists the limitation of current implementation. A detailed description is given of how to code a lesson, what buttons to push, and what utility programs to use. Suggestions for debugging coded lessons and the error messages that may be received during assembly or while running the lesson are given.

Things for You to Know. Fuel System. Student Manual--Introduction. Small Engine Repair Series. First Edition.

ERIC Educational Resources Information Center

Hill, Pamela

This student manual, part of a small-engine repair series on servicing fuel systems, is designed for use by special needs students in Texas. Information covered in this manual is considered to be the minimum that students need to know about fuel systems in order to get small-engine repair jobs. The manual introduces students to small-engine fuel…

Major Appliance Repairer. D.O.T. 723.381-010. T.E.A. 17.02 00. Student's Manual.

ERIC Educational Resources Information Center

Bacon, Bill; Sutton, Mack

This manual on repair of major appliances is one of a series of individualized instructional materials for students. The manual is self-paced, but is designed to be used under the supervision of a coordinator or an instructor. The manual contains 36 assignments, each with all the information needed, a list of objectives that should be met, and…

Introduction to Solar Heating and Cooling Systems. D.O.T. 637.281 and .381. Student's Manual.

ERIC Educational Resources Information Center

Grimes, L. A., Jr.

This manual on solar heating and cooling systems is one of a series of individualized instructional materials for students. The manual is self-paced, but is designed to be used under the supervision of a coordinator or an instructor. The manual contains 15 assignments, each with all the information needed, a list of objectives that should be met,…

Optimization of LC-Orbitrap-HRMS acquisition and MZmine 2 data processing for nontarget screening of environmental samples using design of experiments.

PubMed

Hu, Meng; Krauss, Martin; Brack, Werner; Schulze, Tobias

2016-11-01

Liquid chromatography-high resolution mass spectrometry (LC-HRMS) is a well-established technique for nontarget screening of contaminants in complex environmental samples. Automatic peak detection is essential, but its performance has only rarely been assessed and optimized so far. With the aim to fill this gap, we used pristine water extracts spiked with 78 contaminants as a test case to evaluate and optimize chromatogram and spectral data processing. To assess whether data acquisition strategies have a significant impact on peak detection, three values of MS cycle time (CT) of an LTQ Orbitrap instrument were tested. Furthermore, the key parameter settings of the data processing software MZmine 2 were optimized to detect the maximum number of target peaks from the samples by the design of experiments (DoE) approach and compared to a manual evaluation. The results indicate that short CT significantly improves the quality of automatic peak detection, which means that full scan acquisition without additional MS 2 experiments is suggested for nontarget screening. MZmine 2 detected 75-100 % of the peaks compared to manual peak detection at an intensity level of 10 5 in a validation dataset on both spiked and real water samples under optimal parameter settings. Finally, we provide an optimization workflow of MZmine 2 for LC-HRMS data processing that is applicable for environmental samples for nontarget screening. The results also show that the DoE approach is useful and effort-saving for optimizing data processing parameters. Graphical Abstract ᅟ.

Knowledge-based expert systems and a proof-of-concept case study for multiple sequence alignment construction and analysis.

PubMed

Aniba, Mohamed Radhouene; Siguenza, Sophie; Friedrich, Anne; Plewniak, Frédéric; Poch, Olivier; Marchler-Bauer, Aron; Thompson, Julie Dawn

2009-01-01

The traditional approach to bioinformatics analyses relies on independent task-specific services and applications, using different input and output formats, often idiosyncratic, and frequently not designed to inter-operate. In general, such analyses were performed by experts who manually verified the results obtained at each step in the process. Today, the amount of bioinformatics information continuously being produced means that handling the various applications used to study this information presents a major data management and analysis challenge to researchers. It is now impossible to manually analyse all this information and new approaches are needed that are capable of processing the large-scale heterogeneous data in order to extract the pertinent information. We review the recent use of integrated expert systems aimed at providing more efficient knowledge extraction for bioinformatics research. A general methodology for building knowledge-based expert systems is described, focusing on the unstructured information management architecture, UIMA, which provides facilities for both data and process management. A case study involving a multiple alignment expert system prototype called AlexSys is also presented.

Knowledge-based expert systems and a proof-of-concept case study for multiple sequence alignment construction and analysis

PubMed Central

Aniba, Mohamed Radhouene; Siguenza, Sophie; Friedrich, Anne; Plewniak, Frédéric; Poch, Olivier; Marchler-Bauer, Aron

2009-01-01

The traditional approach to bioinformatics analyses relies on independent task-specific services and applications, using different input and output formats, often idiosyncratic, and frequently not designed to inter-operate. In general, such analyses were performed by experts who manually verified the results obtained at each step in the process. Today, the amount of bioinformatics information continuously being produced means that handling the various applications used to study this information presents a major data management and analysis challenge to researchers. It is now impossible to manually analyse all this information and new approaches are needed that are capable of processing the large-scale heterogeneous data in order to extract the pertinent information. We review the recent use of integrated expert systems aimed at providing more efficient knowledge extraction for bioinformatics research. A general methodology for building knowledge-based expert systems is described, focusing on the unstructured information management architecture, UIMA, which provides facilities for both data and process management. A case study involving a multiple alignment expert system prototype called AlexSys is also presented. PMID:18971242

Matematicas: Nivel A (Mathematics: Level A).

ERIC Educational Resources Information Center

Duron, Dolores; And Others

A teacher's manual was developed for an elementary level mathematics course in Spanish as part of an immersion program for English speaking children. The Level A manual is designed for kindergarten and grade 1 pupils. Teaching procedures, conceptual objectives, vocabulary, and structures are included. Activities are designed to teach either…

Matematicas: Nivel E (Mathematics: Level E).

ERIC Educational Resources Information Center

Duron, Dolores, Ed.; And Others

A teacher's manual was developed for an elementary level mathematics course in Spanish as part of an immersion program for English speaking children. The Level E manual is designed for grade 4 pupils. Teaching procedures, conceptual and language objectives, vocabulary, structures, and learning activities are included. Activities are designed to…

Matematicas: Nivel F (Mathematics: Level F).

ERIC Educational Resources Information Center

Duron, Dolores, Ed.; And Others

A teacher's manual was developed for an elementary level mathematics course in Spanish as part of an immersion program for English speaking children. The Level F manual is designed for grade 5 pupils. Teaching procedures, conceptual and language objectives, vocabulary, structures, and learning activities are included. Activities are designed to…

Job Aid Manuals for Phase II--DESIGN of the Instructional Systems Development Model.

ERIC Educational Resources Information Center

Schulz, Russel E.; Farrell, Jean R.

Designed to supplement the descriptive authoring flowcharts presented in a companion volume, this manual includes specific guidance, examples, and other information referred to in the flowcharts for the implementation of the second phase of the Instructional Systems Development Model (ISD). The introductory section includes definitions;…

33 CFR 149.120 - What are the requirements for manually operated shutoff valves?

Code of Federal Regulations, 2010 CFR

2010-07-01

... manually operated shutoff valves? 149.120 Section 149.120 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) DEEPWATER PORTS DEEPWATER PORTS: DESIGN, CONSTRUCTION, AND EQUIPMENT Pollution Prevention Equipment § 149.120 What are the requirements for manually operated shutoff...

School District Energy Manual.

ERIC Educational Resources Information Center

Association of School Business Officials International, Reston, VA.

This manual serves as an energy conservation reference and management guide for school districts. The School District Energy Program (SDEP) is designed to provide information and/or assistance to school administrators planning to implement a comprehensive energy management program. The manual consists of 15 parts. Part 1 describes the SDEP; Parts…

Resource Manual for Health Occupations Education Instructors.

ERIC Educational Resources Information Center

Feilner, Veronica, Ed.; Robling, Jeannine, Ed.

This resource manual is designed to assist secondary health occupations instructors in implementing their health occupations programs. It contains two types of materials: informational topics and sample forms, letters, memos, and other materials. The manual begins with an overview of the health occupations education program, followed by these…

Content and bibliometric analyses of the Journal of Manual & Manipulative Therapy

PubMed Central

Simon, Corey B; Coronado, Rogelio A; Wurtzel, Wendy A; Riddle, Daniel L; George, Steven Z

2014-01-01

Background: Article characteristics and trends have been elucidated for other physical therapy-focused journals using content and bibliometric analysis. These findings are important for assessing the current state of a journal and for guiding future publication of research. To date, these analyses have not been performed for the Journal of Manual & Manipulative Therapy (JMMT). Objective: To describe content and trends for articles published in JMMT over a 20-year period (1993–2012). Methods: Journal articles were coded using previously-established domains (article type, participant type, research design, study purpose, and clinical condition). Total publications and proportion of publications based on domain were described. Articles specific to manual therapy intervention were examined and compared to data from other physical therapy-focused journals. Impact by citation and author was examined using bibliometric software. Results: Journal of Manual & Manipulative Therapy was found to have a recent acceleration in the number of articles published annually. Over time, topical reviews have decreased in favor of research reports. However, rigorous study designs have represented only a small portion of total journal content, and case reports have maintained a consistent publication presence. Manual therapy intervention articles in JMMT are predominantly case designs, however are similar in characteristics to manual therapy intervention articles published in other physical therapy-focused journals. For JMMT articles overall and manual therapy intervention articles across journals, young to middle-aged symptomatic adults with low back and/or neck pain were the most common study participants. Discussion: Increases in the number of papers and a move toward research reports were observed in JMMT over the 20-year period. Considerations for the future were outlined, including the publication of articles with more rigorous research designs. Manual therapy research for adolescents and older adults and for upper and lower extremity conditions should also be considered as priorities for the future. PMID:25395826

Integrated exhaust gas analysis system for aircraft turbine engine component testing

NASA Technical Reports Server (NTRS)

Summers, R. L.; Anderson, R. C.

1985-01-01

An integrated exhaust gas analysis system was designed and installed in the hot-section facility at the Lewis Research Center. The system is designed to operate either manually or automatically and also to be operated from a remote station. The system measures oxygen, water vapor, total hydrocarbons, carbon monoxide, carbon dioxide, and oxides of nitrogen. Two microprocessors control the system and the analyzers, collect data and process them into engineering units, and present the data to the facility computers and the system operator. Within the design of this system there are innovative concepts and procedures that are of general interest and application to other gas analysis tasks.

State of laboratory manual instruction in California community college introductory (non-majors) biology laboratory instruction

NASA Astrophysics Data System (ADS)

Priest, Michelle

College students must complete a life science course prior to graduation for a bachelor's degree. Generally, the course has lecture and laboratory components. It is in the laboratory where there are exceptional opportunities for exploration, challenge and application of the material learned. Optimally, this would utilize the best of inquiry based approaches. Most community colleges are using a home-grown or self written laboratory manual for the direction of work in the laboratory period. Little was known about the motivation, development and adaptation of use. It was also not known about the future of the laboratory manuals in light of the recent learning reform in California Community Colleges, Student Learning Outcomes. Extensive interviews were conducted with laboratory manual authors to determine the motivation, process of development, who was involved and learning framework used in the creation of the manuals. It was further asked of manual authors their ideas about the future of the manual, the development of staff and faculty and finally, the role Student Learning Outcomes would play in the manual. Science faculty currently teaching the non-majors biology laboratories for at least two semesters were surveyed on-line about actual practice of the manual, assessment, manual flexibility, faculty training and incorporation of Student Learning Outcomes. Finally, an evaluation of the laboratory manual was done using an established Laboratory Task Analysis Instrument. Laboratory manuals were evaluated on a variety of categories to determine the level of inquiry instruction done by students in the laboratory section. The results were that the development of homegrown laboratory manuals was done by community colleges in the Los Angeles and Orange Counties in an effort to minimize the cost of the manual to the students, to utilize all the exercises in a particular lab and to effectively utilize the materials already owned by the department. Further, schools wanted to utilize the current faculty research expertise and knowledge. Unfortunately, laboratory manual authors had no real learning framework in the development of the manual. Based on the LAI, most manuals focused on the lowest levels of inquiry based instruction. Most manuals focused exercises on cell and molecular topics. The manuals had little student exploration, creation or design in the laboratory exercise and no option for repeating the exercise. There was a clear desire of faculty and authors to improve the laboratory experience and manual. Authors and faculty wished to include more inquiry and utilize the best of Student Learning Outcome (SLO) methodologies. Authors and the laboratory manuals have a major disconnect in that authors have clear desires inquiry based learning for the manual but do not effectively implement the inquiry based learning for various reasons. The manuals themselves, laboratory manuals themselves are not robust inquiry based learning models to maximize student learning. Authors and faculty are disconnected in that authors know what they want their manuals to do...but do not effectively communicate that to faculty. Finally, schools are in a "wait and see" approach as to when to integrate the latest learning theory mandated by the Chancellors Office -- Student Learning Outcomes.

An Advanced Professional Pharmacy Experience in a Community Setting Using an Experiential Manual

PubMed Central

Lee, Karen W.; Machado, Matthew R.; Wenzel, Marie M.; Gagnon, James M.; Calomo, Joseph M.

2006-01-01

Objectives To determine the usefulness of a teaching and learning tool used to create structure for advanced pharmacy practice experiences (APPEs) in community pharmacy settings, and to identify differences between respondents' perspectives on the relevance and practicality of implementing specific community pharmacy-related topics during the experience. Design Community practice faculty members designed a manual that outlined a week-by-week schedule of student activities, consistent with the Center for the Advancement of Pharmaceutical Education (CAPE) outcome-based goals, and included associated teaching, documentation, and assessment tools. The manual was distributed to site preceptors and students. Assessment Eighty-six PharmD students responded to a questionnaire upon completion of their community APPE. Student feedback concerning the impact of the manual relative to interactions with site preceptors and their overall learning experience was relatively positive. Conclusion The manual was an effective teaching and learning tool for students completing a community APPE. PMID:17149421

A Fully Automated Microfluidic Femtosecond Laser Axotomy Platform for Nerve Regeneration Studies in C. elegans

PubMed Central

Gokce, Sertan Kutal; Guo, Samuel X.; Ghorashian, Navid; Everett, W. Neil; Jarrell, Travis; Kottek, Aubri; Bovik, Alan C.; Ben-Yakar, Adela

2014-01-01

Femtosecond laser nanosurgery has been widely accepted as an axonal injury model, enabling nerve regeneration studies in the small model organism, Caenorhabditis elegans. To overcome the time limitations of manual worm handling techniques, automation and new immobilization technologies must be adopted to improve throughput in these studies. While new microfluidic immobilization techniques have been developed that promise to reduce the time required for axotomies, there is a need for automated procedures to minimize the required amount of human intervention and accelerate the axotomy processes crucial for high-throughput. Here, we report a fully automated microfluidic platform for performing laser axotomies of fluorescently tagged neurons in living Caenorhabditis elegans. The presented automation process reduces the time required to perform axotomies within individual worms to ∼17 s/worm, at least one order of magnitude faster than manual approaches. The full automation is achieved with a unique chip design and an operation sequence that is fully computer controlled and synchronized with efficient and accurate image processing algorithms. The microfluidic device includes a T-shaped architecture and three-dimensional microfluidic interconnects to serially transport, position, and immobilize worms. The image processing algorithms can identify and precisely position axons targeted for ablation. There were no statistically significant differences observed in reconnection probabilities between axotomies carried out with the automated system and those performed manually with anesthetics. The overall success rate of automated axotomies was 67.4±3.2% of the cases (236/350) at an average processing rate of 17.0±2.4 s. This fully automated platform establishes a promising methodology for prospective genome-wide screening of nerve regeneration in C. elegans in a truly high-throughput manner. PMID:25470130

[Evaluation of production and clinical working time of computer-aided design/computer-aided manufacturing (CAD/CAM) custom trays for complete denture].

PubMed

Wei, L; Chen, H; Zhou, Y S; Sun, Y C; Pan, S X

2017-02-18

To compare the technician fabrication time and clinical working time of custom trays fabricated using two different methods, the three-dimensional printing custom trays and the conventional custom trays, and to prove the feasibility of the computer-aided design/computer-aided manufacturing (CAD/CAM) custom trays in clinical use from the perspective of clinical time cost. Twenty edentulous patients were recruited into this study, which was prospective, single blind, randomized self-control clinical trials. Two custom trays were fabricated for each participant. One of the custom trays was fabricated using functional suitable denture (FSD) system through CAD/CAM process, and the other was manually fabricated using conventional methods. Then the final impressions were taken using both the custom trays, followed by utilizing the final impression to fabricate complete dentures respectively. The technician production time of the custom trays and the clinical working time of taking the final impression was recorded. The average time spent on fabricating the three-dimensional printing custom trays using FSD system and fabricating the conventional custom trays manually were (28.6±2.9) min and (31.1±5.7) min, respectively. The average time spent on making the final impression with the three-dimensional printing custom trays using FSD system and the conventional custom trays fabricated manually were (23.4±11.5) min and (25.4±13.0) min, respectively. There was significant difference in the technician fabrication time and the clinical working time between the three-dimensional printing custom trays using FSD system and the conventional custom trays fabricated manually (P<0.05). The average time spent on fabricating three-dimensional printing custom trays using FSD system and making the final impression with the trays are less than those of the conventional custom trays fabricated manually, which reveals that the FSD three-dimensional printing custom trays is less time-consuming both in the clinical and laboratory process than the conventional custom trays. In addition, when we manufacture custom trays by three-dimensional printing method, there is no need to pour preliminary cast after taking the primary impression, therefore, it can save the impression material and model material. As to completing denture restoration, manufacturing custom trays using FSD system is worth being popularized.

Job Hunters' Guidebook Workshop Program. Instructors Manual.

ERIC Educational Resources Information Center

Vermont State Dept. of Education, Montpelier.

Designed with the adult education instructor/supervisor in mind, this manual's purpose is to bring adult education courses into a career focus by providing a group guidance program. Divided into seven sessions, the program outlined in the manual aims to help individuals, with instructor or guidance counselor leadership, to clarify for themselves…

Field Crop Nutrition--Applied Science Concepts. Student Manual.

ERIC Educational Resources Information Center

Miller, Charles R.

This manual is designed to help agricultural education students to determine and provide the proper kinds and amounts of nutrients for the field crops they produce. The manual provides many learning situations regarding field crops--for example, determining nutrient needs, diagnosing nutrient shortages, and selecting and applying fertilizer and…

Orientation to Teaching for Adjunct Faculty (Instructors Manual).

ERIC Educational Resources Information Center

Greive, Donald; France, Richard E.

Guidelines for conducting and facilitating a workshop designed as an orientation for both beginning and experienced adjunct faculty at community colleges are presented in this instructor's manual. The manual contains the following 11 sections, each defining an objective or activity to be undertaken during the workshop, and providing…

Math and Science Model Programs Manual.

ERIC Educational Resources Information Center

Sawyer, Donna, Comp.; And Others

This implementation manual has been developed to describe four model mathematics and science programs designed to increase African-American students' interest in mathematics and science. The manual will help affiliates of the Urban League to mobilize existing community resources to achieve the goals of the national education initiative. The four…

Improving Sex Equity in Postsecondary Vocational/Technical Programs: A Resource Manual.

ERIC Educational Resources Information Center

Lovelace, Bill E.; And Others

This manual was developed to assist postsecondary administrators, faculty, staff, and students by providing materials specifically designed to eliminate sex bias and stereotyping of students and to recruit students into nontraditional careers and vocational-technical programs. The manual is organized in six sections. The first section introduces…

Dental Aide. Student Manual [and] Instructor Key. Revised.

ERIC Educational Resources Information Center

Heckman, Karen; Noirfalise, Pat

The first component of this three-part package is a student manual designed to be used independently in secondary health occupations programs or on-the-job training programs for dental assistants. The manual contains seven units that cover the following topics: introduction to dentistry; basic office procedures; infection control and occupational…

Southeast Asian Family Day Care Resource Manual.

ERIC Educational Resources Information Center

Union of Pan Asian Communities, San Diego, CA.

A companion publication to California's Family Day Care Training Curriculum, this resource manual is designed to help others replicate the child care provider training project and establish a child care network. The manual consists of seven sections. The first section provides an introduction. The second summarizes experiences of the agency that…

Safe, Effective Use of Pesticides: A Manual for Commercial Applicators.

ERIC Educational Resources Information Center

Extension Service (USDA), Washington, DC.

This publication is a certification manual for the commercial pesticide applicator's permit of the Michigan Department of Agriculture. The information presented in this manual is designed to assist prospective commercial pesticide applicators to meet certification requirements under federal guidelines. The first of the eight sections deals with…

Manual for Librarians in Small Hospitals. Sixth Edition.

ERIC Educational Resources Information Center

Graham, Elaine, Ed.; Kesti, Julie, Ed.

This manual is designed to aid the inexperienced person assigned to a hospital library and given the responsibility of ordering library materials, organizing the collection, borrowing from other libraries, and seeking information. Following a brief introduction, the manual is divided into 10 chapters: (1) Organization and Administration of the…

A Teacher's Spelling Manual for Seventh Grade.

ERIC Educational Resources Information Center

Datres, Kristine, Comp.; Heggenstaller, Barbara, Comp.

The spelling program described in this manual was designed with the idea that spelling study initiated in the elementary grades should continue through the middle school years. The manual first describes the program's objectives: to help students learn basic spelling rules, develop an interest in word lore and vocabulary improvement, and develop…

Surface Water Treatment Workshop Manual.

ERIC Educational Resources Information Center

Ontario Ministry of the Environment, Toronto.

This manual was developed for use at workshops designed to increase the knowledge of experienced water treatment plant operators. Each of the fourteen lessons in this document has clearly stated behavioral objectives to tell the trainee what he should know or do after completing that topic. Areas covered in this manual include: basic water…

Laboratory Waste Disposal Manual. Revised Edition.

ERIC Educational Resources Information Center

Stephenson, F. G., Ed.

This manual is designed to provide laboratory personnel with information about chemical hazards and ways of disposing of chemical wastes with minimum contamination of the environment. The manual contains a reference chart section which has alphabetical listings of some 1200 chemical substances with information on the health, fire and reactivity…

Assistive Technology: Tips, Tools, and Techniques. A Parent Resource Manual.

ERIC Educational Resources Information Center

Wilcox, M. Jeanne; Norman-Murch, Trudi; Oberstein, Jill S.; Volkmann, Melody A.; Wagner, Deanna K.; Musselwhite, Caroline Ramsey; Malena, Edye; Weber, Carolyn A.

Designed for parents of children who have a wide variety of disabilities, this manual discusses the ways in which assistive technology can facilitate the child's active participation in developmentally appropriate activities and offers ideas for incorporating devices and strategies into daily school and home routines. The manual attempts to…

MANUAL OF PLANNING STANDARDS FOR SCHOOL BUILDINGS.

ERIC Educational Resources Information Center

New York State Education Dept., Albany.

THIS MANUAL CONTAINS THE REQUIREMENTS AND RECOMMENDATIONS FOR DEVELOPMENT AND DESIGN IN ERECTION, REPAIR, ENLARGEMENT, AND REMODELING OF SCHOOL BUILDINGS, IN TERMS OF HEALTH, COMFORT, AND SAFETY OF PUPILS ATTENDING THE PUBLIC SCHOOLS. SPECIFIC AREAS COVERED BY THIS MANUAL INCLUDE--(1) STRUCTURE AND SAFETY PLANNING, (2) MATERIALS, (3) VISUAL…

Washington Manual: A New Tool for Local School Accounting

ERIC Educational Resources Information Center

Federal Aid Planner, 1972

1972-01-01

An advance glimpse of the revised financial accounting methods for school districts recommended in a new manual from the U. S. Office of Education. The manual is designed to help school districts modernize their financial accounting procedures and their entire range of fiscal management practices. (Author/DN)

Class Manual for Public Libraries (LIS 388K.3). Fall 1992.

ERIC Educational Resources Information Center

Roy, Loriene

This manual is designed to accompany a University of Texas graduate course on public libraries that covers the historical development, legal basis, administration, financial basis, services to users, system organization, physical facilities, marketing, popular culture, issues, trends, and problems of public libraries. The manual contains the…

Toms River Drivers Manual 1984-1985.

ERIC Educational Resources Information Center

Thomas, Patricia

The procedures in this manual are designed to establish stability and continuity within the student transportation department of the Toms River Regional Schools in New Jersey. The manual is divided into three sections. Section 1 provides driver and aide specific information. It includes directives related to time clock, spare buses, and…

FAPRS Manual: Manual for the Functional Analytic Psychotherapy Rating Scale

ERIC Educational Resources Information Center

Callaghan, Glenn M.; Follette, William C.

2008-01-01

The Functional Analytic Psychotherapy Rating Scale (FAPRS) is behavioral coding system designed to capture those essential client and therapist behaviors that occur during Functional Analytic Psychotherapy (FAP). The FAPRS manual presents the purpose and rules for documenting essential aspects of FAP. The FAPRS codes are exclusive and exhaustive…

Junior High Computer Studies: Teacher Resource Manual.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Branch.

This manual is designed to help classroom teachers in Alberta, Canada implement the Junior High Computer Studies Program. The first eight sections cover the following material: (1) introduction to the teacher resource manual; (2) program rationale and philosophy; (3) general learner expectations; (4) program framework and flexibility; (5) program…

The computational structural mechanics testbed procedures manual

NASA Technical Reports Server (NTRS)

Stewart, Caroline B. (Compiler)

1991-01-01

The purpose of this manual is to document the standard high level command language procedures of the Computational Structural Mechanics (CSM) Testbed software system. A description of each procedure including its function, commands, data interface, and use is presented. This manual is designed to assist users in defining and using command procedures to perform structural analysis in the CSM Testbed User's Manual and the CSM Testbed Data Library Description.

Welding torch trajectory generation for hull joining using autonomous welding mobile robot

NASA Astrophysics Data System (ADS)

Hascoet, J. Y.; Hamilton, K.; Carabin, G.; Rauch, M.; Alonso, M.; Ares, E.

2012-04-01

Shipbuilding processes involve highly dangerous manual welding operations. Welding of ship hulls presents a hazardous environment for workers. This paper describes a new robotic system, developed by the SHIPWELD consortium, that moves autonomously on the hull and automatically executes the required welding processes. Specific focus is placed on the trajectory control of such a system and forms the basis for the discussion in this paper. It includes a description of the robotic hardware design as well as some methodology used to establish the torch trajectory control.

Control Requirements to Support Manual Piloting Capability

NASA Technical Reports Server (NTRS)

Merancy, Nujoud; Chevray, Kay; Gonzalez, Rodolfo; Madsen, Jennifer; Spehar, Pete

2013-01-01

The manual piloting requirements specified under the NASA Constellation Program involved Cooper-Harper ratings, which are a qualitative and subjective evaluation from experienced pilots. This type of verification entails a significant investment of resources to assess a completed design and is not one that can easily or meaningfully be applied upfront in the design phase. The evolution of the Multi-Purpose Crew Vehicle Program to include an independently developed propulsion system from an international partner makes application of Cooper-Harper based design requirements inadequate. To mitigate this issue, a novel solution was developed to reformulate the necessary piloting capability into quantifiable requirements. A trio of requirements was designed which specify control authority, precision, and impulse residuals enabling propulsion design within specified guidance and control boundaries. These requirements have been evaluated against both the existing Orion design and the proposed ESA design and have been found to achieve the desired specificity. The requirement set is capable of being applied to the development of other spacecraft in support of manual piloting.

Short-Term and Working Memory Impairments in Early-Implanted, Long-Term Cochlear Implant Users Are Independent of Audibility and Speech Production

PubMed Central

AuBuchon, Angela M.; Pisoni, David B.; Kronenberger, William G.

2015-01-01

OBJECTIVES Determine if early-implanted, long-term cochlear implant (CI) users display delays in verbal short-term and working memory capacity when processes related to audibility and speech production are eliminated. DESIGN Twenty-three long-term CI users and 23 normal-hearing controls each completed forward and backward digit span tasks under testing conditions which differed in presentation modality (auditory or visual) and response output (spoken recall or manual pointing). RESULTS Normal-hearing controls reproduced more lists of digits than the CI users, even when the test items were presented visually and the responses were made manually via touchscreen response. CONCLUSIONS Short-term and working memory delays observed in CI users are not due to greater demands from peripheral sensory processes such as audibility or from overt speech-motor planning and response output organization. Instead, CI users are less efficient at encoding and maintaining phonological representations in verbal short-term memory utilizing phonological and linguistic strategies during memory tasks. PMID:26496666

Design and performance study of an orthopaedic surgery robotized module for automatic bone drilling.

PubMed

Boiadjiev, George; Kastelov, Rumen; Boiadjiev, Tony; Kotev, Vladimir; Delchev, Kamen; Zagurski, Kazimir; Vitkov, Vladimir

2013-12-01

Many orthopaedic operations involve drilling and tapping before the insertion of screws into a bone. This drilling is usually performed manually, thus introducing many problems. These include attaining a specific drilling accuracy, preventing blood vessels from breaking, and minimizing drill oscillations that would widen the hole. Bone overheating is the most important problem. To avoid such problems and reduce the subjective factor, automated drilling is recommended. Because numerous parameters influence the drilling process, this study examined some experimental methods. These concerned the experimental identification of technical drilling parameters, including the bone resistance force and temperature in the drilling process. During the drilling process, the following parameters were monitored: time, linear velocity, angular velocity, resistance force, penetration depth, and temperature. Specific drilling effects were revealed during the experiments. The accuracy was improved at the starting point of the drilling, and the error for the entire process was less than 0.2 mm. The temperature deviations were kept within tolerable limits. The results of various experiments with different drilling velocities, drill bit diameters, and penetration depths are presented in tables, as well as the curves of the resistance force and temperature with respect to time. Real-time digital indications of the progress of the drilling process are shown. Automatic bone drilling could entirely solve the problems that usually arise during manual drilling. An experimental setup was designed to identify bone drilling parameters such as the resistance force arising from variable bone density, appropriate mechanical drilling torque, linear speed of the drill, and electromechanical characteristics of the motors, drives, and corresponding controllers. Automatic drilling guarantees greater safety for the patient. Moreover, the robot presented is user-friendly because it is simple to set robot tasks, and process data are collected in real time. Copyright © 2013 John Wiley & Sons, Ltd.

Automated Methodologies for the Design of Flow Diagrams for Development and Maintenance Activities

NASA Astrophysics Data System (ADS)

Shivanand M., Handigund; Shweta, Bhat

The Software Requirements Specification (SRS) of the organization is a text document prepared by strategic management incorporating the requirements of the organization. These requirements of ongoing business/ project development process involve the software tools, the hardware devices, the manual procedures, the application programs and the communication commands. These components are appropriately ordered for achieving the mission of the concerned process both in the project development and the ongoing business processes, in different flow diagrams viz. activity chart, workflow diagram, activity diagram, component diagram and deployment diagram. This paper proposes two generic, automatic methodologies for the design of various flow diagrams of (i) project development activities, (ii) ongoing business process. The methodologies also resolve the ensuing deadlocks in the flow diagrams and determine the critical paths for the activity chart. Though both methodologies are independent, each complements other in authenticating its correctness and completeness.

An open source automatic quality assurance (OSAQA) tool for the ACR MRI phantom.

PubMed

Sun, Jidi; Barnes, Michael; Dowling, Jason; Menk, Fred; Stanwell, Peter; Greer, Peter B

2015-03-01

Routine quality assurance (QA) is necessary and essential to ensure MR scanner performance. This includes geometric distortion, slice positioning and thickness accuracy, high contrast spatial resolution, intensity uniformity, ghosting artefact and low contrast object detectability. However, this manual process can be very time consuming. This paper describes the development and validation of an open source tool to automate the MR QA process, which aims to increase physicist efficiency, and improve the consistency of QA results by reducing human error. The OSAQA software was developed in Matlab and the source code is available for download from http://jidisun.wix.com/osaqa-project/. During program execution QA results are logged for immediate review and are also exported to a spreadsheet for long-term machine performance reporting. For the automatic contrast QA test, a user specific contrast evaluation was designed to improve accuracy for individuals on different display monitors. American College of Radiology QA images were acquired over a period of 2 months to compare manual QA and the results from the proposed OSAQA software. OSAQA was found to significantly reduce the QA time from approximately 45 to 2 min. Both the manual and OSAQA results were found to agree with regard to the recommended criteria and the differences were insignificant compared to the criteria. The intensity homogeneity filter is necessary to obtain an image with acceptable quality and at the same time keeps the high contrast spatial resolution within the recommended criterion. The OSAQA tool has been validated on scanners with different field strengths and manufacturers. A number of suggestions have been made to improve both the phantom design and QA protocol in the future.

Highway Safety Program Manual: Volume 12: Highway Design, Construction and Maintenance.

ERIC Educational Resources Information Center

National Highway Traffic Safety Administration (DOT), Washington, DC.

Volume 12 of the 19-volume Highway Safety Program Manual (which provides guidance to State and local governments on preferred highway safety practices) focuses on highway design, construction and maintenance. The purpose and specific objectives of such a program are described. Federal authority in the area of highway safety and policies regarding…

46 CFR 162.161-5 - Instruction manual for design, installation, operation, and maintenance.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 6 2014-10-01 2014-10-01 false Instruction manual for design, installation, operation, and maintenance. 162.161-5 Section 162.161-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) EQUIPMENT, CONSTRUCTION, AND MATERIALS: SPECIFICATIONS AND APPROVAL ENGINEERING EQUIPMENT Fixed Clean Agent Fire Extinguishing Systems §...

The Role and Design of Screen Images in Software Documentation.

ERIC Educational Resources Information Center

van der Meij, Hans

2000-01-01

Discussion of learning a new computer software program focuses on how to support the joint handling of a manual, input devices, and screen display. Describes a study that examined three design styles for manuals that included screen images to reduce split-attention problems and discusses theory versus practice and cognitive load theory.…

A Consumer Education Self-Help Manual for Displaced Homemaker Service Providers.

ERIC Educational Resources Information Center

Williams, Herma; Thompson, Patricia

This manual is designed to allow service providers at displaced homemaker centers to update and refresh their knowledge and information of consumer concepts and to initiate and implement some consumer education services designed to meet the needs of displaced homemakers. Material is divided into five parts. Part 1 focuses on financial management…

Program user's manual for optimizing the design of a liquid or gaseous propellant rocket engine with the automated combustor design code AUTOCOM

NASA Technical Reports Server (NTRS)

Reichel, R. H.; Hague, D. S.; Jones, R. T.; Glatt, C. R.

1973-01-01

This computer program manual describes in two parts the automated combustor design optimization code AUTOCOM. The program code is written in the FORTRAN 4 language. The input data setup and the program outputs are described, and a sample engine case is discussed. The program structure and programming techniques are also described, along with AUTOCOM program analysis.

Students Using a Novel Web-Based Laboratory Class Support System: A Case Study in Food Chemistry Education

ERIC Educational Resources Information Center

van der Kolk, Koos; Beldman, Gerrit; Hartog, Rob; Gruppen, Harry

2012-01-01

The design, usage, and evaluation of a Web-based laboratory manual (WebLM) are described. The main aim of the WebLM is to support students while working in the laboratory by providing them with just-in-time information. Design guidelines for this electronic manual were derived from literature on cognitive load and user interface design. The WebLM…

High School Longitudinal Study of 2009 (HSLS:09) Base Year to First Follow-Up Data File Documentation. Appendixes. NCES 2014-361

ERIC Educational Resources Information Center

Ingels, Steven J.; Pratt, Daniel J.; Herget, Deborah R.; Dever, Jill A.; Fritch, Laura Burns; Ottem, Randolph; Rogers, James E.; Kitmitto, Sami; Leinwand, Steve

2013-01-01

The manual that accompanies these appendices was produced to familiarize data users with the design, and the procedures followed for data collection and processing, in the base year and first follow-up of the High School Longitudinal Study of 2009 (HSLS:09), with emphasis on the first follow-up. It also provides the necessary documentation for use…

Using Object-Oriented Databases for Implementation of Interactive Electronic Technical Manuals

DTIC Science & Technology

1992-03-01

analytical process applied throughout the system acquisition program in order to define supportability related design factors and to ensure development of a...Node Alternatives Node Alternatives (NODEALTS) is a list of mutually exclusive nodes, grouped together by the fact that they apply to different...contextual situations. The content specific layer NODEALTS element is a reference to a set of nodes that might apply in different situations. No hierarchy

Nimbus 7 Coastal Zone Color Scanner (CZCS). Level 1 data product users' guide

NASA Technical Reports Server (NTRS)

Williams, S. P.; Szajna, E. F.; Hovis, W. A.

1985-01-01

The coastal zone color scanner (CZCS) is a scanning multispectral radiometer designed specifically for the remote sensing of Ocean Color parameters from an Earth orbiting space platform. A technical manual which is intended for users of NIMBUS 7 CZCS Level 1 data products is presented. It contains information needed by investigators and data processing personnel to operate on the data using digital computers and related equipment.

High School Longitudinal Study of 2009 (HSLS:09) Base Year to First Follow-Up Data File Documentation. NCES 2014-361

ERIC Educational Resources Information Center

Ingels, Steven J.; Pratt, Daniel J.; Herget, Deborah R.; Dever, Jill A.; Fritch, Laura Burns; Ottem, Randolph; Rogers, James E.; Kitmitto, Sami; Leinwand, Steve

2013-01-01

This manual has been produced to familiarize data users with the design, and the procedures followed for data collection and processing, in the base year and first follow-up of the High School Longitudinal Study of 2009 (HSLS:09), with emphasis on the first follow-up. It also provides the necessary documentation for use of the public-use data…

Utilization of a hospital information system for outpatient prescription screening process at the PKU Muhammadiyah Yogyakarta Hospital

NASA Astrophysics Data System (ADS)

Ismail, R.; Perwitasari, D. A.; Supadmi, W.; Risdiana, I.

2017-11-01

Prescription screening includes administrative and clinical precision of the drug, dosage, frequency and route of administration, therapeutic duplication, allergic or sensitive reactions, and actual or potential interactions. The study was aimed to identify the obstacles and compliance level of users, as well as the design of a prescription screening information system and its users’ perceptions. This study used qualitative and quantitative research design with action research studies involving pharmacists, pharmacy technicians, a programmer and clinical practice student pharmacists. The obstacle of pharmacists in doing prescription screening was the long duration in the process of manual prescription review. The compliance of pharmacists in manual prescription review was under 50%. The prescription information system was created by the programmer on the proposal of pharmacists in the form of front view, pharmacy display, sales display, prescription display, prescription display per period and display of recapped prescriptions. Perception of the usefulness was very high with a value of 4.5±0.577 and perception of ease of use was very high with a value of 4.214±0.534 from 28 respondents. The prescription information system was created by a programmer upon the recommendations of pharmacists. Perception of the usefulness and ease of use was very high.

A programming environment for distributed complex computing. An overview of the Framework for Interdisciplinary Design Optimization (FIDO) project. NASA Langley TOPS exhibit H120b

NASA Technical Reports Server (NTRS)

Townsend, James C.; Weston, Robert P.; Eidson, Thomas M.

1993-01-01

The Framework for Interdisciplinary Design Optimization (FIDO) is a general programming environment for automating the distribution of complex computing tasks over a networked system of heterogeneous computers. For example, instead of manually passing a complex design problem between its diverse specialty disciplines, the FIDO system provides for automatic interactions between the discipline tasks and facilitates their communications. The FIDO system networks all the computers involved into a distributed heterogeneous computing system, so they have access to centralized data and can work on their parts of the total computation simultaneously in parallel whenever possible. Thus, each computational task can be done by the most appropriate computer. Results can be viewed as they are produced and variables changed manually for steering the process. The software is modular in order to ease migration to new problems: different codes can be substituted for each of the current code modules with little or no effect on the others. The potential for commercial use of FIDO rests in the capability it provides for automatically coordinating diverse computations on a networked system of workstations and computers. For example, FIDO could provide the coordination required for the design of vehicles or electronics or for modeling complex systems.

Comparison Between Manual Auditing and a Natural Language Process With Machine Learning Algorithm to Evaluate Faculty Use of Standardized Reports in Radiology.

PubMed

Guimaraes, Carolina V; Grzeszczuk, Robert; Bisset, George S; Donnelly, Lane F

2018-03-01

When implementing or monitoring department-sanctioned standardized radiology reports, feedback about individual faculty performance has been shown to be a useful driver of faculty compliance. Most commonly, these data are derived from manual audit, which can be both time-consuming and subject to sampling error. The purpose of this study was to evaluate whether a software program using natural language processing and machine learning could accurately audit radiologist compliance with the use of standardized reports compared with performed manual audits. Radiology reports from a 1-month period were loaded into such a software program, and faculty compliance with use of standardized reports was calculated. For that same period, manual audits were performed (25 reports audited for each of 42 faculty members). The mean compliance rates calculated by automated auditing were then compared with the confidence interval of the mean rate by manual audit. The mean compliance rate for use of standardized reports as determined by manual audit was 91.2% with a confidence interval between 89.3% and 92.8%. The mean compliance rate calculated by automated auditing was 92.0%, within that confidence interval. This study shows that by use of natural language processing and machine learning algorithms, an automated analysis can accurately define whether reports are compliant with use of standardized report templates and language, compared with manual audits. This may avoid significant labor costs related to conducting the manual auditing process. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Career Education. Industrial Arts Objectives, Grades 6-12. DS Manual 2890.1 [and] Approved List of Essential Textbooks/Instructional Materials for Industrial Arts, Grades 6-12. DS Manual 2890.2; Revised.

ERIC Educational Resources Information Center

Dependents Schools (DOD), Washington, DC.

Designed to assist the instructor in presenting curriculum content based upon industry and technology, this manual presents a program description and the instructional objectives for the industrial arts program in the Department of Defense Dependents Schools (DoDDS). Six sections are included in the manual: Industrial Arts Program Objectives,…

DNA rendering of polyhedral meshes at the nanoscale

NASA Astrophysics Data System (ADS)

Benson, Erik; Mohammed, Abdulmelik; Gardell, Johan; Masich, Sergej; Czeizler, Eugen; Orponen, Pekka; Högberg, Björn

2015-07-01

It was suggested more than thirty years ago that Watson-Crick base pairing might be used for the rational design of nanometre-scale structures from nucleic acids. Since then, and especially since the introduction of the origami technique, DNA nanotechnology has enabled increasingly more complex structures. But although general approaches for creating DNA origami polygonal meshes and design software are available, there are still important constraints arising from DNA geometry and sense/antisense pairing, necessitating some manual adjustment during the design process. Here we present a general method of folding arbitrary polygonal digital meshes in DNA that readily produces structures that would be very difficult to realize using previous approaches. The design process is highly automated, using a routeing algorithm based on graph theory and a relaxation simulation that traces scaffold strands through the target structures. Moreover, unlike conventional origami designs built from close-packed helices, our structures have a more open conformation with one helix per edge and are therefore stable under the ionic conditions usually used in biological assays.

DNA rendering of polyhedral meshes at the nanoscale.

PubMed

Benson, Erik; Mohammed, Abdulmelik; Gardell, Johan; Masich, Sergej; Czeizler, Eugen; Orponen, Pekka; Högberg, Björn

2015-07-23

It was suggested more than thirty years ago that Watson-Crick base pairing might be used for the rational design of nanometre-scale structures from nucleic acids. Since then, and especially since the introduction of the origami technique, DNA nanotechnology has enabled increasingly more complex structures. But although general approaches for creating DNA origami polygonal meshes and design software are available, there are still important constraints arising from DNA geometry and sense/antisense pairing, necessitating some manual adjustment during the design process. Here we present a general method of folding arbitrary polygonal digital meshes in DNA that readily produces structures that would be very difficult to realize using previous approaches. The design process is highly automated, using a routeing algorithm based on graph theory and a relaxation simulation that traces scaffold strands through the target structures. Moreover, unlike conventional origami designs built from close-packed helices, our structures have a more open conformation with one helix per edge and are therefore stable under the ionic conditions usually used in biological assays.

An iterative sinogram gap-filling method with object- and scanner-dedicated discrete cosine transform (DCT)-domain filters for high resolution PET scanners.

PubMed

Kim, Kwangdon; Lee, Kisung; Lee, Hakjae; Joo, Sungkwan; Kang, Jungwon

2018-01-01

We aimed to develop a gap-filling algorithm, in particular the filter mask design method of the algorithm, which optimizes the filter to the imaging object by an adaptive and iterative process, rather than by manual means. Two numerical phantoms (Shepp-Logan and Jaszczak) were used for sinogram generation. The algorithm works iteratively, not only on the gap-filling iteration but also on the mask generation, to identify the object-dedicated low frequency area in the DCT-domain that is to be preserved. We redefine the low frequency preserving region of the filter mask at every gap-filling iteration, and the region verges on the property of the original image in the DCT domain. The previous DCT2 mask for each phantom case had been manually well optimized, and the results show little difference from the reference image and sinogram. We observed little or no difference between the results of the manually optimized DCT2 algorithm and those of the proposed algorithm. The proposed algorithm works well for various types of scanning object and shows results that compare to those of the manually optimized DCT2 algorithm without perfect or full information of the imaging object.

Operating Manual for Two-Year Campus Programs.

ERIC Educational Resources Information Center

Ohio Board of Regents, Columbus.

Guidelines and accompanying forms are provided in this operations manual designed as a guide for the management and development of the instructional units at the member institutions of Ohio's two-year college system. The manual first presents the mission statement of the two-year colleges, defines the various types of colleges in the system, and…

The Bicentennial in Tennessee. Teacher's Manual.

ERIC Educational Resources Information Center

Roller, Lib

This manual is designed to assist teachers in integrating the theme of the Bicentennial into all subject areas. Most of the activities and materials described in this unit relate to the outdoors. The manual deals with activities under the three categories of interest in the Bicentennial celebration: (1) Heritage USA - the people, places, and…

Oregon School Bond Manual. Fourth Edition.

ERIC Educational Resources Information Center

Oregon State Dept. of Education, Salem.

The manual is intended to guide attorneys and officials of school districts in the issuance and sale of school district bonds. Purchasers of school district bonds rely on the recommendations of accredited bond attorneys who render opinions concerning the validity and legality of bond issues offered for sale. This manual is designed to assist in…

Observer Training Manual for the Changing Teacher Practice Study. Revised Manual.

ERIC Educational Resources Information Center

Barnes, Susan

This observer training manual was developed as a central component of a research effort, Changing Teacher Practice (CTP), which was designed to increase the frequency of effective teaching behaviors and staff development strategies in an ongoing school system. The observations focused on two major aspects of classroom teaching--instruction and…

Applied Mathematics, Tenth Grade. A Resource Manual.

ERIC Educational Resources Information Center

Baltimore County Public Schools, Towson, MD.

This resource manual is designed for use with tenth grade boys whose main interest lies in the shop and industrial arts areas. The course emphasizes mathematical problems inherent in various trades and industries. The primary objective is to motivate the student to apply, improve, and increase his computational skills. The manual is divided into…

Interpreting Biodiversity: A Manual for Environmental Educators in the Tropics.

ERIC Educational Resources Information Center

Domroese, Margret C.; Sterling, Eleanor J.

This manual was developed for educators and natural resource managers who are establishing interpretive programs where biodiversity is the richest and most threatened. The manual contains five units which are based on the experiences of staff at the American Museum of Natural History and represent the key steps of designing an interpretation…

Readers on the Prowl: Florida Library Youth Program Manual.

ERIC Educational Resources Information Center

Johnson, Margie, Comp.; Cook, Ann, Comp.; O'Reilly, Lesley, Comp.

This manual is designed to accompany the 1999 Florida Library Youth Program, focusing on the theme of the library as a destination. This introductory section of the manual contains: an overview of the program that discusses basic philosophy, outreach to children in poverty, age and ability levels, and materials and incentives; a schedule of…

Students' Reactions to Manual-Based Treatments for Substance Abuse: An Exploratory Study

ERIC Educational Resources Information Center

Simons, Lori; Jacobucci, Raymond; Houston, Hank

2006-01-01

A quasi-experimental research design with quantitative and qualitative methodologies was conducted to explore reactions of 21 students to treatment manuals for substance abuse. Students were randomized to experimental (n = 11) and attention-control (n = 10) groups involving exposure to one of two manual-based therapy interventions. Quantitative…

A Forestry Manual for Ontario Secondary School Teachers.

ERIC Educational Resources Information Center

Morrison, G. R.

This manual is designed for use in a 1-year, grade 11 forestry course. The manual consists of eight units that focus on: (1) dendrology (tree description); (2) forestry measurements; (3) maps and aerial photography; (4) Canadian forest geography; (5) logging and utilization; (6) forest management and silviculture (the science and art of…

Development and Evaluation of an Interactive Electronic Laboratory Manual for Cooperative Learning of Medical Histology

ERIC Educational Resources Information Center

Khalil, Mohammed K.; Kirkley, Debbie L.; Kibble, Jonathan D.

2013-01-01

This article describes the development of an interactive computer-based laboratory manual, created to facilitate the teaching and learning of medical histology. The overarching goal of developing the manual is to facilitate self-directed group interactivities that actively engage students during laboratory sessions. The design of the manual…

Nurse Assistant Instructors Manual and Resource Guide. Final Report.

ERIC Educational Resources Information Center

Meyer, E. June; And Others

This instructor's resource manual is designed to assist nurse/instructors in four training programs: Nurse Assistant in Long-Term Care (NALTC), Medication Technician (MT), Level I Medication Aide (MA), or Insulin Administration (IA). A brief report on the project that developed the manual is presented first. Section 1 includes an article on adult…

Institute on Career Education for the Handicapped. Instructor's Manual [and] Participant's Guide. Project RETOOL.

ERIC Educational Resources Information Center

Schwartz, Stuart E., Ed.

The instructor's manual and participant's guide are designed for the Project RETOOL Institute on Career Education for the Handicapped, a program of continuing education models for teacher educators in regular and special education. The instructor's manual provides guidelines for replicating the Project RETOOL Institute. Sections on career…

76 FR 64851 - Airworthiness Directives; Learjet Inc. Model 45 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-19

... Limitations Section (ALS) of the maintenance manual, which adds life-limits, revises life-limits, or adds.... Discussion We have reviewed the design approval holder's changes to the ALS of the maintenance manual, which... Labor cost Parts cost product operators Change ALS in maintenance manual.... 1 work-hour x $85 per $0...

Clean Community System Multi-Material Recycling Manual.

ERIC Educational Resources Information Center

Keep America Beautiful, Inc., New York, NY.

This manual is designed to assist communities in recycling the greatest possible volume of materials in ways which will: (1) benefit the local economy; (2) encourage cooperation between public and private sectors; and (3) prove valuable to municipal and county sanitation services. The manual is divided into five sections. Section 1 lays out the…

Animal Traction. Appropriate Technologies for Development. Manual M-12.

ERIC Educational Resources Information Center

Watson, Peter R.

This manual is designed for use by Peace Corps volunteers and agricultural extension personnel working in animal traction development programs. While some of the information contained in the manual is specific to the extension of animal-powered agriculture in Africa, the principles covered are generally applicable wherever the method is being used…

Make Waves: Read! 1998 Summer Library Program Manual. Bulletin No. 98107.

ERIC Educational Resources Information Center

Roeber, Jane A., Ed.

This manual is designed to help individual libraries in Wisconsin plan and implement their summer library programs. The manual is divided into six sections. Section 1 covers planning and promoting programs, and includes reproducible promotional materials, sample letters to parents, and sample media materials. Section 2 provides decorating and…

Agriculture--Floriculture. Kit No. 104. Instructor's Manual and Student Learning Activity Guide.

ERIC Educational Resources Information Center

Huffman, Tommy

Designed for use in a secondary agricultural education class, this activity kit on floriculture consists of an instructor's manual and a student learning guide. The instructor's manual contains this information: duration, goals, a list of instructional objectives, the vocational clusters to which this activity is related, activity implementation…

Fostering the Battered and Abused Child: Instructor's Manual.

ERIC Educational Resources Information Center

McFadden, Emily Jean

This manual, one of a series of manuals developed for the Foster Parent Training Project at Eastern Michigan University, was designed to assist instructors in presenting course content to foster parents on how to provide a corrective and healing environment for battered and abused foster children. The introductory section presents information for…

Tools and Their Uses. Rate Training Manual.

ERIC Educational Resources Information Center

Naval Personnel Program Support Activity, Washington, DC.

One of a series of training manuals prepared for enlisted personnel in the Navy and Naval Reserve, this supplementary manual contains data pertinent to a variety of tools necessary to the satisfactory performance of modern technical equipment used by the Navy. It is designed to help the learner identify tools and fastening devices by their correct…

Leaving Home Again. Instructor Manual.

ERIC Educational Resources Information Center

McFadden, Emily Jean

This manual is one of four modules in the curriculum PUSH For Youths GOALS (Providing Understanding, Support and Help for Youths Going Out And Living Successfully), which was developed for use in training foster parents to be primary teachers of the youths in their homes. This manual is designed to be used in foster parent classes. The module…

Colorado Outward Bound School River Rafters' Manual.

ERIC Educational Resources Information Center

Leachman, Mark

Instructional sequences, safety rules, duties of crew members, and procedures for Colorado Outward Bound School river rafting trips are summarized in this manual. Designed to acquaint instructors with the duties expected of them on the trips, the information in the manual is presented in outline form and is intended for those with prior river…

Industrial Electronics II for ICT. Instructor's Guide and Curriculum Guide.

ERIC Educational Resources Information Center

Snider, Bob; Notgrass, Troy

This manual is designed to help instructors guide students through their manuals and laboratory training stations in the field of industrial electronics. The manual consists of the following nine sections: (1) suggestions for teaching the course; (2) an instructional delivery outline; (3) lists of essential elements common to all trade and…

General Policies Manual for Student Assistants: Indiana State University Libraries. Revised.

ERIC Educational Resources Information Center

Miller, Marsha; And Others

Designed to be given to new student assistants during a formal orientation program coordinated by Indiana State University's Department of Library Instruction and Orientation, this policy manual was prepared to help student library workers understand what the library expects of them. Following a brief introduction, the manual is divided into seven…

Influence of Manual Screwdriver Design in Combination With and Without Predrilling on Insertion Torque of Orthodontic Mini-Implants.

PubMed

Katalinic, Andrej; Trinajstic Zrinski, Magda; Roksandic Vrancic, Zlatka; Spalj, Stjepan

2017-02-01

The study focused on the influence of screwdriver design in combination with and without predrilling a pilot hole of inner implant diameter on insertion torque of orthodontic mini-implants, controlling for cortical thickness and vertical insertion force as cofactors. One hundred twenty mini-implants (Forestadent) of 1.7 mm in diameter and 6 and 8 mm in length were manually inserted into 120 swine rib bone samples. Maximal insertion torque as a measure of primary stability and vertical force were measured. The study included procedures with and without pilot hole and different screwdriver handles and shaft length and 2 implant lengths. Design of manual screwdriver does not modify insertion torque to a significant extent. In multiple linear regression model, significant predictors of insertion torque are thicker cortical bone (explaining 16.6% of variability), higher vertical force at maximal torque (13.5%), 6-mm implant length (2.5%), and the presence of pilot hole (2.3%). Handle type and shaft length of manual screwdriver do not significantly influence insertion torque, whereas predrilling a pilot hole has low impact on torque values of manually inserted self-drilling orthodontic mini-implants.

Process Control Manual for Aerobic Biological Wastewater Treatment Facilities.

ERIC Educational Resources Information Center

Environmental Protection Agency, Washington, DC. Office of Water Programs.

This Environmental Protection Agency (EPA) publication is an operations manual for activated sludge and trickling filter wastewater treatment facilities. The stated purpose of the manual is to provide an on-the-job reference for operators of these two types of treatment plants. The overall objective of the manual is to aid the operator in…

14 CFR 21.308 - Quality manual.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Quality manual. 21.308 Section 21.308... PROCEDURES FOR PRODUCTS AND PARTS Approval of Materials, Parts, Processes, and Appliances § 21.308 Quality manual. Each applicant for or holder of a PMA must provide a manual describing its quality system to the...

User's manual for the Heat Pipe Space Radiator design and analysis Code (HEPSPARC)

NASA Technical Reports Server (NTRS)

Hainley, Donald C.

1991-01-01

A heat pipe space radiatior code (HEPSPARC), was written for the NASA Lewis Research Center and is used for the design and analysis of a radiator that is constructed from a pumped fluid loop that transfers heat to the evaporative section of heat pipes. This manual is designed to familiarize the user with this new code and to serve as a reference for its use. This manual documents the completed work and is intended to be the first step towards verification of the HEPSPARC code. Details are furnished to provide a description of all the requirements and variables used in the design and analysis of a combined pumped loop/heat pipe radiator system. A description of the subroutines used in the program is furnished for those interested in understanding its detailed workings.

No-passing zone system: user's manual.

DOT National Transportation Integrated Search

2016-08-01

This Users Manual is intended for traffic engineers and technicians who will be either conducting passing sight distance : measurement runs in the field or processing the collected data in the office. This Users Manual includes: : - A descripti...

An automatic method to calculate heart rate from zebrafish larval cardiac videos.

PubMed

Kang, Chia-Pin; Tu, Hung-Chi; Fu, Tzu-Fun; Wu, Jhe-Ming; Chu, Po-Hsun; Chang, Darby Tien-Hao

2018-05-09

Zebrafish is a widely used model organism for studying heart development and cardiac-related pathogenesis. With the ability of surviving without a functional circulation at larval stages, strong genetic similarity between zebrafish and mammals, prolific reproduction and optically transparent embryos, zebrafish is powerful in modeling mammalian cardiac physiology and pathology as well as in large-scale high throughput screening. However, an economical and convenient tool for rapid evaluation of fish cardiac function is still in need. There have been several image analysis methods to assess cardiac functions in zebrafish embryos/larvae, but they are still improvable to reduce manual intervention in the entire process. This work developed a fully automatic method to calculate heart rate, an important parameter to analyze cardiac function, from videos. It contains several filters to identify the heart region, to reduce video noise and to calculate heart rates. The proposed method was evaluated with 32 zebrafish larval cardiac videos that were recording at three-day post-fertilization. The heart rate measured by the proposed method was comparable to that determined by manual counting. The experimental results show that the proposed method does not lose accuracy while largely reducing the labor cost and uncertainty of manual counting. With the proposed method, researchers do not have to manually select a region of interest before analyzing videos. Moreover, filters designed to reduce video noise can alleviate background fluctuations during the video recording stage (e.g. shifting), which makes recorders generate usable videos easily and therefore reduce manual efforts while recording.

A quality score for coronary artery tree extraction results

NASA Astrophysics Data System (ADS)

Cao, Qing; Broersen, Alexander; Kitslaar, Pieter H.; Lelieveldt, Boudewijn P. F.; Dijkstra, Jouke

2018-02-01

Coronary artery trees (CATs) are often extracted to aid the fully automatic analysis of coronary artery disease on coronary computed tomography angiography (CCTA) images. Automatically extracted CATs often miss some arteries or include wrong extractions which require manual corrections before performing successive steps. For analyzing a large number of datasets, a manual quality check of the extraction results is time-consuming. This paper presents a method to automatically calculate quality scores for extracted CATs in terms of clinical significance of the extracted arteries and the completeness of the extracted CAT. Both right dominant (RD) and left dominant (LD) anatomical statistical models are generated and exploited in developing the quality score. To automatically determine which model should be used, a dominance type detection method is also designed. Experiments are performed on the automatically extracted and manually refined CATs from 42 datasets to evaluate the proposed quality score. In 39 (92.9%) cases, the proposed method is able to measure the quality of the manually refined CATs with higher scores than the automatically extracted CATs. In a 100-point scale system, the average scores for automatically and manually refined CATs are 82.0 (+/-15.8) and 88.9 (+/-5.4) respectively. The proposed quality score will assist the automatic processing of the CAT extractions for large cohorts which contain both RD and LD cases. To the best of our knowledge, this is the first time that a general quality score for an extracted CAT is presented.

A proposed power assisted system of manual wheelchair based on universal design for eldery

NASA Astrophysics Data System (ADS)

Susmartini, Susy; Pryadhitama, Ilham; Herdiman, Lobes; Wahyufitriani, Cindy

2017-11-01

Difficulties in walking is high percentage case in the limitations mobility of the elderly. An assisted technology commonly used to help the elderly who have walking difficulty is a manual wheelchair. However, the elderly frequently experiences difficulties in operating manual wheelchair due to gradually degradation of their physical condition. Preliminary study results showed that the average grip strength of the hands of seven elderly subjects was 13.8 ± 6.96 kg and the value is relatively weak. In addition, the mean maximum speed of 7 elderly subjects when doing to round the wheelchair is 0.6 ± 0.2m / s. This value is only 56.4% compared with an average speed of 20-23-year age group (8 males), which is 1.1 ± 0.1 m / s. This shows that the elderly who have walking difficulty have low grip strength and speed in operating a wheelchair. On the other hand, manual wheelchairs suffer an inadequate technology solution to solve the problem. Therefore, an assistive technology is proposed to create mobility aid to accommodate the elderly needs. One approach used is Universal Design. This paper proposes a system of intervention in the manual wheelchair through the 7 principles of Universal Design approach. The preliminary principle has not been able to accommodate the needs of the elderly will become a reference in the proposed design of this study.

7 CFR 318.13-14 - Movement of processed fruits, vegetables, and other products.

Code of Federal Regulations, 2010 CFR

2010-01-01

.../import_export/plants/manuals/ports/downloads/hawaii.pdf and http://www.aphis.usda.gov/import_export/plants/manuals/ports/downloads/puerto_rico.pdf. (b) Consignments of processed fruits, vegetables, or...

The successful evolution of a voluntary vessel safety program in the USA.

PubMed

Hughes, Leslie

2006-01-01

The North Pacific Fishing Vessel Owners' Association (NPFVOA) is a non-profit association dedicated to safety education and training for commercial fishermen and other mariners. Funding is provided primarily through member contributions and also through tuition fees and sales of materials. Members are primarily fishing vessel owners and fishing-related companies, from small salmon boats with single operators to large processing ships with crews of 150 or more. The Association also works together with insurance underwriters and brokers, maritime attorneys and fishing industry support businesses. It works closely with the United States Coast Guard, the Occupational Safety and Health Administration (OSHA) of the United States Department of Labor, the National Institute for Occupational Safety and Health (NIOSH), and many state agencies. There are three primary components of the NPFVOA Vessel Safety Program--a comprehensive safety manual, a series of safety and survival at sea videotapes, and a crew training program. The vessel safety manual includes 300 pages of text and illustrations covering subjects ranging from vessel familiarity for deckhands to stability for the owner and skipper. It is based on the experience of those who have fished the Bering Sea and the North Pacific. The manual calls for vessel owners and skippers to adopt safety practices specific to the vessel's characteristics and service, the waters fished, the season fished and the experience of the crew. The safety and survival videotape series is designed to complement hands-on training classes. The crew training program uses hands-on practice to dramatize and enliven the information presented in the manual and on the videotapes. Courses are designed to be portable and conducted in numerous ports and states. The NPFVOA also publishes a quarterly newsletter covering its safety program, other relevant safety information and reports of lessons learned from serious fishing vessel accidents.

Automated Functional Analysis of Astrocytes from Chronic Time-Lapse Calcium Imaging Data

PubMed Central

Wang, Yinxue; Shi, Guilai; Miller, David J.; Wang, Yizhi; Wang, Congchao; Broussard, Gerard; Wang, Yue; Tian, Lin; Yu, Guoqiang

2017-01-01

Recent discoveries that astrocytes exert proactive regulatory effects on neural information processing and that they are deeply involved in normal brain development and disease pathology have stimulated broad interest in understanding astrocyte functional roles in brain circuit. Measuring astrocyte functional status is now technically feasible, due to recent advances in modern microscopy and ultrasensitive cell-type specific genetically encoded Ca2+ indicators for chronic imaging. However, there is a big gap between the capability of generating large dataset via calcium imaging and the availability of sophisticated analytical tools for decoding the astrocyte function. Current practice is essentially manual, which not only limits analysis throughput but also risks introducing bias and missing important information latent in complex, dynamic big data. Here, we report a suite of computational tools, called Functional AStrocyte Phenotyping (FASP), for automatically quantifying the functional status of astrocytes. Considering the complex nature of Ca2+ signaling in astrocytes and low signal to noise ratio, FASP is designed with data-driven and probabilistic principles, to flexibly account for various patterns and to perform robustly with noisy data. In particular, FASP explicitly models signal propagation, which rules out the applicability of tools designed for other types of data. We demonstrate the effectiveness of FASP using extensive synthetic and real data sets. The findings by FASP were verified by manual inspection. FASP also detected signals that were missed by purely manual analysis but could be confirmed by more careful manual examination under the guidance of automatic analysis. All algorithms and the analysis pipeline are packaged into a plugin for Fiji (ImageJ), with the source code freely available online at https://github.com/VTcbil/FASP. PMID:28769780

Automated Functional Analysis of Astrocytes from Chronic Time-Lapse Calcium Imaging Data.

PubMed

Wang, Yinxue; Shi, Guilai; Miller, David J; Wang, Yizhi; Wang, Congchao; Broussard, Gerard; Wang, Yue; Tian, Lin; Yu, Guoqiang

2017-01-01

Recent discoveries that astrocytes exert proactive regulatory effects on neural information processing and that they are deeply involved in normal brain development and disease pathology have stimulated broad interest in understanding astrocyte functional roles in brain circuit. Measuring astrocyte functional status is now technically feasible, due to recent advances in modern microscopy and ultrasensitive cell-type specific genetically encoded Ca 2+ indicators for chronic imaging. However, there is a big gap between the capability of generating large dataset via calcium imaging and the availability of sophisticated analytical tools for decoding the astrocyte function. Current practice is essentially manual, which not only limits analysis throughput but also risks introducing bias and missing important information latent in complex, dynamic big data. Here, we report a suite of computational tools, called Functional AStrocyte Phenotyping (FASP), for automatically quantifying the functional status of astrocytes. Considering the complex nature of Ca 2+ signaling in astrocytes and low signal to noise ratio, FASP is designed with data-driven and probabilistic principles, to flexibly account for various patterns and to perform robustly with noisy data. In particular, FASP explicitly models signal propagation, which rules out the applicability of tools designed for other types of data. We demonstrate the effectiveness of FASP using extensive synthetic and real data sets. The findings by FASP were verified by manual inspection. FASP also detected signals that were missed by purely manual analysis but could be confirmed by more careful manual examination under the guidance of automatic analysis. All algorithms and the analysis pipeline are packaged into a plugin for Fiji (ImageJ), with the source code freely available online at https://github.com/VTcbil/FASP.

High-volume workflow management in the ITN/FBI system

NASA Astrophysics Data System (ADS)

Paulson, Thomas L.

1997-02-01

The Identification Tasking and Networking (ITN) Federal Bureau of Investigation system will manage the processing of more than 70,000 submissions per day. The workflow manager controls the routing of each submission through a combination of automated and manual processing steps whose exact sequence is dynamically determined by the results at each step. For most submissions, one or more of the steps involve the visual comparison of fingerprint images. The ITN workflow manager is implemented within a scaleable client/server architecture. The paper describes the key aspects of the ITN workflow manager design which allow the high volume of daily processing to be successfully accomplished.