Work, Discretion and Learning: Processes of Life Learning and Development at Work

ERIC Educational Resources Information Center

Billett, Stephen

2015-01-01

Knowing how adults learn through work is central to understanding their development across working lives. That development is important for their personal trajectories, and ability to contribute, sustain and advance the interests of their workplaces, and collectively to the social and economic viability of their communities and nations. This paper…

48 CFR 227.7107-2 - Contracts for construction supplies and research and development work.

Code of Federal Regulations, 2010 CFR

2010-10-01

... supplies and research and development work. 227.7107-2 Section 227.7107-2 Federal Acquisition Regulations... research and development work. Use the provisions and clauses required by 227-7103-6 and 227.7203-6 when..., or research work, or test and evaluation studies of structures, equipment, processes, or materials...

From crisis to development--analysis of air traffic control work processes.

PubMed

Teperi, Anna-Maria; Leppänen, Anneli

2011-03-01

In this study an intervention to improve work processes in air traffic control (ATC) is evaluated. The background was the Finnish air traffic controllers' strike of 1999. The old ways of thinking and acting did not support development of ATC prompting a need for a new kind of working culture in the organisation. Several actions were started. In one of these, ATC work processes were modelled by personnel and development plans concerning work were delivered to top management. Different actors (management, trade union, stakeholders) were interviewed before (n=16) and after the project (n=7). The intervention supported systematic co-operation between different actors in the organisation. However, a follow-up revealed that only a few participants had adopted the idea of continuous work development. Mastery of human factors is crucial in a high reliability work environment such as ATC. But how is the analytical and co-operative aspect kept alive in an organisation that is run by strict international regulation and has a strong technical competence, but is not that strong in collaborative and human aspects? Copyright © 2010 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The Application of Six Sigma Methodologies to University Processes: The Use of Student Teams

ERIC Educational Resources Information Center

Pryor, Mildred Golden; Alexander, Christine; Taneja, Sonia; Tirumalasetty, Sowmya; Chadalavada, Deepthi

2012-01-01

The first student Six Sigma team (activated under a QEP Process Sub-team) evaluated the course and curriculum approval process. The goal was to streamline the process and thereby shorten process cycle time and reduce confusion about how the process works. Members of this team developed flowcharts on how the process is supposed to work (by…

Nonstandard working schedules and health: the systematic search for a comprehensive model.

PubMed

Merkus, Suzanne L; Holte, Kari Anne; Huysmans, Maaike A; van Mechelen, Willem; van der Beek, Allard J

2015-10-23

Theoretical models on shift work fall short of describing relevant health-related pathways associated with the broader concept of nonstandard working schedules. Shift work models neither combine relevant working time characteristics applicable to nonstandard schedules nor include the role of rest periods and recovery in the development of health complaints. Therefore, this paper aimed to develop a comprehensive model on nonstandard working schedules to address these shortcomings. A literature review was conducted using a systematic search and selection process. Two searches were performed: one associating the working time characteristics time-of-day and working time duration with health and one associating recovery after work with health. Data extracted from the models were used to develop a comprehensive model on nonstandard working schedules and health. For models on the working time characteristics, the search strategy yielded 3044 references, of which 26 met the inclusion criteria that contained 22 distinctive models. For models on recovery after work, the search strategy yielded 896 references, of which seven met the inclusion criteria containing seven distinctive models. Of the models on the working time characteristics, three combined time-of-day with working time duration, 18 were on time-of-day (i.e. shift work), and one was on working time duration. The model developed in the paper has a comprehensive approach to working hours and other work-related risk factors and proposes that they should be balanced by positive non-work factors to maintain health. Physiological processes leading to health complaints are circadian disruption, sleep deprivation, and activation that should be counterbalanced by (re-)entrainment, restorative sleep, and recovery, respectively, to maintain health. A comprehensive model on nonstandard working schedules and health was developed. The model proposes that work and non-work as well as their associated physiological processes need to be balanced to maintain good health. The model gives researchers a useful overview over the various risk factors and pathways associated with health that should be considered when studying any form of nonstandard working schedule.

Philippine Wind Farm Analysis and Site Selection Analysis, 1 January 2000 - 31 December 2000

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conover, K.

2001-12-01

The U.S. Department of Energy (DOE), through the National Renewable Energy Laboratory (NREL), has been working in partnership with the U.S. Agency for International Development (USAID) in an ongoing process to quantify the Philippine wind energy potential and foster wind farm development. As part of that process, NREL retained Global Energy Concepts, LLC (GEC) to review and update the policy needs as well as develop a site-screening process applicable for the Philippines. GEC worked closely with the Philippines National Power Corporation (NPC) in completing this work. This report provides the results of the policy needs and site selection analyses conductedmore » by GEC.« less

Automated Work Package: Conceptual Design and Data Architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Al Rashdan, Ahmad; Oxstrand, Johanna; Agarwal, Vivek

The automated work package (AWP) is one of the U.S. Department of Energy’s (DOE) Light Water Reactor Sustainability Program efforts to enhance the safety and economics of the nuclear power industry. An AWP is an adaptive and interactive work package that intelligently drives the work process according to the plant condition, resources status, and users progress. The AWP aims to automate several manual tasks of the work process to enhance human performance and reduce human errors. Electronic work packages (eWPs), studied by the Electric Power Research Institute (EPRI), are work packages that rely to various extent on electronic data processingmore » and presentation. AWPs are the future of eWPs. They are envisioned to incorporate the advanced technologies of the future, and thus address the unresolved deficiencies associated with the eWPs in a nuclear power plant. In order to define the AWP, it is necessary to develop an ideal envisioned scenario of the future work process without any current technology restriction. The approach followed to develop this scenario is specific to every stage of the work process execution. The scenario development resulted in fifty advanced functionalities that can be part of the AWP. To rank the importance of these functionalities, a survey was conducted involving several U.S. nuclear utilities. The survey aimed at determining the current need of the nuclear industry with respect to the current work process, i.e. what the industry is satisfied with, and where the industry envisions potential for improvement. The survey evaluated the most promising functionalities resulting from the scenario development. The results demonstrated a significant desire to adopt the majority of these functionalities. The results of the survey are expected to drive the Idaho National Laboratory (INL) AWP research and development (R&D). In order to facilitate this mission, a prototype AWP is needed. Since the vast majority of earlier efforts focused on the frontend aspects of the AWP, the backend data architecture was researched and developed in this effort. The backend design involved data architecture aspects. It was realized through this effort that the key aspects of this design are hierarchy, data configuration and live information, data templates and instances, the flow of work package execution, the introduction of properties, and the means to interface the backend to the frontend. After the backend design was developed, a data structure was built to reflect the developed data architecture. The data structure was developed to accommodate the fifty functionalities identified by the envisioned scenario development. The data structure was evaluated by incorporating an example work order from the nuclear power industry. The implementation resulted in several optimization iterations of the data structure. In addition, the rearrangement of the work order information to fit the data structure highlighted several possibilities for improvement in the current work order design, and significantly reduced the size of the work order.« less

The Process and the Product: Two English Classes Develop Materials.

ERIC Educational Resources Information Center

Nettle, Mary Ellen

1982-01-01

English classes conducted for two groups of women, garment factory workers and building cleaners, are compared. The garment workers interviewed each other and produced a slide-tape program. The cleaners produced a song about their work and in the process, developed awareness of the work situation, and a sense of cooperation. (MSE)

Insights from Cognitive Neuroscience: The Importance of Executive Function for Early Reading Development and Education

ERIC Educational Resources Information Center

Cartwright, Kelly B.

2012-01-01

Research Findings: Executive function begins to develop in infancy and involves an array of processes, such as attention, inhibition, working memory, and cognitive flexibility, which provide the means by which individuals control their own behavior, work toward goals, and manage complex cognitive processes. Thus, executive function plays a…

Discrete-Time Demodulator Architectures for Free-Space Broadband Optical Pulse-Position Modulation

NASA Technical Reports Server (NTRS)

Gray, A. A.; Lee, C.

2004-01-01

The objective of this work is to develop discrete-time demodulator architectures for broadband optical pulse-position modulation (PPM) that are capable of processing Nyquist or near-Nyquist data rates. These architectures are motivated by the numerous advantages of realizing communications demodulators in digital very large scale integrated (VLSI) circuits. The architectures are developed within a framework that encompasses a large body of work in optical communications, synchronization, and multirate discrete-time signal processing and are constrained by the limitations of the state of the art in digital hardware. This work attempts to create a bridge between theoretical communication algorithms and analysis for deep-space optical PPM and modern digital VLSI. The primary focus of this work is on the synthesis of discrete-time processing architectures for accomplishing the most fundamental functions required in PPM demodulators, post-detection filtering, synchronization, and decision processing. The architectures derived are capable of closely approximating the theoretical performance of the continuous-time algorithms from which they are derived. The work concludes with an outline of the development path that leads to hardware.

[Computers in nursing: development of free software application with care and management].

PubMed

dos Santos, Sérgio Ribeiro

2010-06-01

This study aimed at developing an information system in nursing with the implementation of nursing care and management of the service. The SisEnf--Information System in Nursing--is a free software module that comprises the care of nursing: history, clinical examination and care plan; the management module consists of: service shifts, personnel management, hospital indicators and other elements. The system was implemented at the Medical Clinic of the Lauro Wanderley University Hospital, at Universidade Federal da Paraiba. In view of the need to bring user and developer closer, in addition to the constant change of functional requirements during the interactive process, the method of unified process was used. The SisEnf was developed on a WEB platform and using free software. Hence, the work developed aimed at assisting in the working process of nursing, which will now have the opportunity to incorporate information technology in their work routine.

Flow process in combustors

NASA Technical Reports Server (NTRS)

Gouldin, F. C.

1982-01-01

Fluid mechanical effects on combustion processes in steady flow combustors, especially gas turbine combustors were investigated. Flow features of most interest were vorticity, especially swirl, and turbulence. Theoretical analyses, numerical calculations, and experiments were performed. The theoretical and numerical work focused on noncombusting flows, while the experimental work consisted of both reacting and nonreacting flow studies. An experimental data set, e.g., velocity, temperature and composition, was developed for a swirl flow combustor for use by combustion modelers for development and validation work.

Computer-Integrated Breakdown of Hardwood Sawlogs

Treesearch

Luis G. Occeña; Daniel L. Schmoldt; Philip A. Araman

1996-01-01

This paper describes work in progress concerning the development of an integrated approach to hardwood processing. The motivation for this work, research direction, and research developments are presented.

Intensification of the Students' Self-Development Process When Performing Design and Settlement Works on the "Machine Parts" Course

ERIC Educational Resources Information Center

Timerbaev, Rais Mingalievich; Muhutdinov, Rafis Habreevich; Danilov, Valeriy Fedorovich

2015-01-01

The article addresses issues related to the methodology of intensifying self-development process when performing design and settlement works on the "Machine Parts" course for the students studying in such areas of training as "Technology" and "Vocational Education" with the use of computer technologies. At the same…

Developing Elementary Math and Science Process Skills Through Engineering Design Instruction

NASA Astrophysics Data System (ADS)

Strong, Matthew G.

This paper examines how elementary students can develop math and science process skills through an engineering design approach to instruction. The performance and development of individual process skills overall and by gender were also examined. The study, preceded by a pilot, took place in a grade four extracurricular engineering design program in a public, suburban school district. Students worked in pairs and small groups to design and construct airplane models from styrofoam, paper clips, and toothpicks. The development and performance of process skills were assessed through a student survey of learning gains, an engineering design packet rubric (student work), observation field notes, and focus group notes. The results indicate that students can significantly develop process skills, that female students may develop process skills through engineering design better than male students, and that engineering design is most helpful for developing the measuring, suggesting improvements, and observing process skills. The study suggests that a more regular engineering design program or curriculum could be beneficial for students' math and science abilities both in this school and for the elementary field as a whole.

Scheduling on the basis of the research of dependences among the construction process parameters

NASA Astrophysics Data System (ADS)

Romanovich, Marina; Ermakov, Alexander; Mukhamedzhanova, Olga

2017-10-01

The dependences among the construction process parameters are investigated in the article: average integrated value of qualification of the shift, number of workers per shift and average daily amount of completed work on the basis of correlation coefficient are considered. Basic data for the research of dependences among the above-stated parameters have been collected during the construction of two standard objects A and B (monolithic houses), in four months of construction (October, November, December, January). Kobb-Douglas production function has proved the values of coefficients of correlation close to 1. Function is simple to be used and is ideal for the description of the considered dependences. The development function, describing communication among the considered parameters of the construction process, is developed. The function of the development gives the chance to select optimum quantitative and qualitative (qualification) structure of the brigade link for the work during the next period of time, according to a preset value of amount of works. Function of the optimized amounts of works, which reflects interrelation of key parameters of construction process, is developed. Values of function of the optimized amounts of works should be used as the average standard for scheduling of the storming periods of construction.

Strategies for Research Development in Hospital Social Work: A Case Study

ERIC Educational Resources Information Center

McNeill, Ted; Nicholas, David Bruce

2012-01-01

Objectives: This article identifies salient components in the advancement of social work research leadership within health care. Method: Using tenets of a modified retrospective case study approach, processes and outcomes of social work research progression at a pediatric hospital are reviewed. Results: Capacity-building processes were…

Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process.

PubMed

Winter, Gabriele; Schaub, Karlheinz G; Großmann, Kay; Laun, Gerhard; Landau, Kurt; Bruder, Ralph

2012-01-01

Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.

Rework and workarounds in nurse medication administration process: implications for work processes and patient safety.

PubMed

Halbesleben, Jonathon R B; Savage, Grant T; Wakefield, Douglas S; Wakefield, Bonnie J

2010-01-01

Health care organizations have redesigned existing and implemented new work processes intended to improve patient safety. As a consequence of these process changes, there are now intentionally designed "blocks" or barriers that limit how specific work actions, such as ordering and administering medication, are to be carried out. Health care professionals encountering these designed barriers can choose to either follow the new process, engage in workarounds to get past the block, or potentially repeat work (rework). Unfortunately, these workarounds and rework may lead to other safety concerns. The aim of this study was to examine rework and workarounds in hospital medication administration processes. Observations and semistructured interviews were conducted with 58 nurses from four hospital intensive care units focusing on the medication administration process. Using the constant comparative method, we analyzed the observation and interview data to develop themes regarding rework and workarounds. From this analysis, we developed an integrated process map of the medication administration process depicting blocks. A total of 12 blocks were reported by the participants. Based on the analysis, we categorized them as related to information exchange, information entry, and internal supply chain issues. Whereas information exchange and entry blocks tended to lead to rework, internal supply chain issues were more likely to lead to workarounds. A decentralized pharmacist on the unit may reduce work flow blocks (and, thus, workarounds and rework). Work process redesign may further address the problems of workarounds and rework.

The development of strategy use in elementary school children: working memory and individual differences.

PubMed

Imbo, Ineke; Vandierendonck, André

2007-04-01

The current study tested the development of working memory involvement in children's arithmetic strategy selection and strategy efficiency. To this end, an experiment in which the dual-task method and the choice/no-choice method were combined was administered to 10- to 12-year-olds. Working memory was needed in retrieval, transformation, and counting strategies, but the ratio between available working memory resources and arithmetic task demands changed across development. More frequent retrieval use, more efficient memory retrieval, and more efficient counting processes reduced the working memory requirements. Strategy efficiency and strategy selection were also modified by individual differences such as processing speed, arithmetic skill, gender, and math anxiety. Short-term memory capacity, in contrast, was not related to children's strategy selection or strategy efficiency.

Learning together, working together: an evaluation of experiences of a pilot programme for partnership between unions and management in the health service.

PubMed

Young, Pat; Moule, Pam; Evans, David; Simmons, Sue; Crack, Meg; Mayo, Gillian

2012-07-01

This article describes an innovative initiative to support partnership working between trade unions and management in three National Health Service Trusts, by means of shared participation in a series of learning and development days. Although there is existing evidence, within the literature on partnership, of the benefits of partnership working for employees and employers, there is little discussion of processes by which effective partnership is developed. More specifically, there is no current academic literature on the role of education in enabling improved partnership working between trade unions and managers. The findings of the evaluation suggest that the pilot provided a successful learning experience as well as a number of pointers for improving future developments of this nature. The recommendations include embedding of partnership work within existing staff development processes. Copyright © 2011 Elsevier Ltd. All rights reserved.

A review of best work-absence management and return-to-work practices for workers with musculoskeletal or common mental disorders.

PubMed

Durand, Marie-José; Corbière, Marc; Coutu, Marie-France; Reinharz, Daniel; Albert, Valérie

2014-01-01

Workplace absenteeism is still a curse for developed countries, and more systematic practices need to be adopted to address this issue. To review the literature on best practices for managing work absences related to musculoskeletal or common mental disorders. A review was conducted by performing a search in bibliographic databases and on work-disability research institute websites. Recommendations regarding work-absence management and return-to-work practices were extracted from all the retained documents and organized within a chronological framework. In total, 17 documents were analyzed, leading to identification of common work-absence management and return-to-work practices, the importance of a worker support approach, and recommended roles and responsibilities for stakeholders. These practices were then integrated into a six-step process: (1) time off and recovery period; (2) initial contact with the worker; (3) evaluation of the worker and his job tasks; (4) development of a return-to-work plan with accommodations; (5) work resumption, and (6) follow-up of the return-to-work process. Based on this review, we constructed a comprehensive work-absence management and return-to-work process designed to assist organizations. Our results indicate that such a process must be included within a broader policy of health promotion and job retention. Adaptations will be required for implementation in the workplace.

Psychological detachment as moderator between psychosocial work conditions and low back pain development.

PubMed

Mierswa, Tobias; Kellmann, Michael

2017-03-30

Recovery processes in leisure time influence the effect of psychosocial work factors on health issues. However, this function of recovery has been neglected in research regarding the influence of work-related risk factors on low back pain (LBP) development. The aim of this prospective study was to examine the function of psychological detachment - a relevant recovery experience - concerning the influence of psychosocial work factors on LBP development. A moderating function of detachment for the interplay of work factors and LBP was assumed. Sixty pain-free administrative employees of German universities completed an online survey 3 times during a 6-month period. Generalized estimating equations were used to estimate risk-factors of LBP. Analyses revealed an increased chance of LBP development for smokers and a decreasing chance when work resources were high. Detachment had no direct influence on LBP development, although it moderated the influence of work stressors and work resources on LBP. On the one hand, high detachment values seem to protect against an increased chance of LBP development when employees were confronted with high work stressors, while on the other hand high detachment values enhance the protective effect of high work resources. The results indicated a moderating role of detachment concerning the influence of psychosocial work factors on LBP development. Therefore, it is necessary to include recovery processes in future research regarding LBP development and consequently in LBP prevention concepts. Int J Occup Med Environ Health 2017;30(2):313-327. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Similarities and Differences between Working Memory and Long-Term Memory: Evidence from the Levels-of-Processing Span Task

ERIC Educational Resources Information Center

Rose, Nathan S.; Myerson, Joel; Roediger, Henry L., III; Hale, Sandra

2010-01-01

Two experiments compared the effects of depth of processing on working memory (WM) and long-term memory (LTM) using a levels-of-processing (LOP) span task, a newly developed WM span procedure that involves processing to-be-remembered words based on their visual, phonological, or semantic characteristics. Depth of processing had minimal effect on…

Work process and task-based design of intelligent assistance systems in German textile industry

NASA Astrophysics Data System (ADS)

Löhrer, M.; Ziesen, N.; Altepost, A.; Saggiomo, M.; Gloy, Y. S.

2017-10-01

The mid-sized embossed German textile industry must face social challenges e.g. demographic change or technical changing processes. Interaction with intelligent systems (on machines) and increasing automation changes processes, working structures and employees’ tasks on all levels. Work contents are getting more complex, resulting in the necessity for diversified and enhanced competencies. Mobile devices like tablets or smartphones are increasingly finding their way into the workplace. Employees who grew up with new forms of media have certain advantages regarding the usage of modern technologies compared to older employees. Therefore, it is necessary to design new systems which help to adapt the competencies of both younger and older employees to new automated production processes in the digital work environment. The key to successful integration of technical assistance systems is user-orientated design and development that includes concepts for competency development under consideration of, e.g., ethical and legal aspects.

Prevention of falls, malnutrition and pressure ulcers among older persons - nursing staff's experiences of a structured preventive care process.

PubMed

Lannering, Christina; Ernsth Bravell, Marie; Johansson, Linda

2017-05-01

A structured and systematic care process for preventive work, aimed to reduce falls, pressure ulcers and malnutrition among older people, has been developed in Sweden. The process involves risk assessment, team-based interventions and evaluation of results. Since development, this structured work process has become web-based and has been implemented in a national quality registry called 'Senior Alert' and used countrywide. The aim of this study was to describe nursing staff's experience of preventive work by using the structured preventive care process as outlined by Senior Alert. Eight focus group interviews were conducted during 2015 including staff from nursing homes and home-based nursing care in three municipalities. The interview material was subjected to qualitative content analysis. In this study, both positive and negative opinions were expressed about the process. The systematic and structured work flow seemed to only partly facilitate care providers to improve care quality by making better clinical assessments, performing team-based planned interventions and learning from results. Participants described lack of reliability in the assessments and varying opinions about the structure. Furthermore, organisational structures limited the preventive work. © 2016 John Wiley & Sons Ltd.

Intelligent Work Process Engineering System

NASA Technical Reports Server (NTRS)

Williams, Kent E.

2003-01-01

Optimizing performance on work activities and processes requires metrics of performance for management to monitor and analyze in order to support further improvements in efficiency, effectiveness, safety, reliability and cost. Information systems are therefore required to assist management in making timely, informed decisions regarding these work processes and activities. Currently information systems regarding Space Shuttle maintenance and servicing do not exist to make such timely decisions. The work to be presented details a system which incorporates various automated and intelligent processes and analysis tools to capture organize and analyze work process related data, to make the necessary decisions to meet KSC organizational goals. The advantages and disadvantages of design alternatives to the development of such a system will be discussed including technologies, which would need to bedesigned, prototyped and evaluated.

[Social companies and solidary economy: perspectives for the work inclusion of individuals with mental disorders].

PubMed

Lussi, Isabela Aparecida de Oliveira; Pereira, Maria Alice Ornellas

2011-04-01

The psychiatric reform process requires the implementation of public policies that guarantee the work inclusion of individuals with mental disorders. To do this, work must be understood as a promoter of autonomy, emancipation and citizenship. The objective of this study is to reflect on the theoretical concepts related to social insertion through work, with the purpose of exploring the inclusion of individuals with mental disorders in the work market. The concepts social company and solidary economy where selected as fundamental for the study. In the social company, the subject is considered to be a social being, focusing on the development process towards emancipation. In solidary economy, the objective is to develop an economy that is more just, equal and solidary. Further discussions on these concepts should be developed to support the implementation of projects for social inclusion through work.

Visibility into the Work: TQM Work Process Analysis with HPT and ISD.

ERIC Educational Resources Information Center

Beagles, Charles A.; Griffin, Steven L.

2003-01-01

Discusses the use of total quality management (TQM), work process flow diagrams, and ISD (instructional systems development) tools with HPT (human performance technology) to address performance gaps in the Veterans Benefits Administration (VBA). Describes performance goals, which were to improve accuracy and reduce backlog of claim files. (LRW)

Work Place Oriented Learning With Digital Media--Consequences for Competency Development

ERIC Educational Resources Information Center

Spottl, Georg; Schulte, Sven; Grantz, Torsten

2012-01-01

Due to their increasing availability and prevalence, digital media allow for a relocation of learning to work processes and support work process oriented learning. This can be put into practice with the aid of different medial/technological and didactical settings. Some examples are the application of mobile terminals, interactive platforms, or…

Children's Verbal Working Memory: Role of Processing Complexity in Predicting Spoken Sentence Comprehension

ERIC Educational Resources Information Center

Magimairaj, Beula M.; Montgomery, James W.

2012-01-01

Purpose: This study investigated the role of processing complexity of verbal working memory tasks in predicting spoken sentence comprehension in typically developing children. Of interest was whether simple and more complex working memory tasks have similar or different power in predicting sentence comprehension. Method: Sixty-five children (6- to…

CAD/CAM approach to improving industry productivity gathers momentum

NASA Technical Reports Server (NTRS)

Fulton, R. E.

1982-01-01

Recent results and planning for the NASA/industry Integrated Programs for Aerospace-Vehicle Design (IPAD) program for improving productivity with CAD/CAM methods are outlined. The industrial group work is being mainly done by Boeing, and progress has been made in defining the designer work environment, developing requirements and a preliminary design for a future CAD/CAM system, and developing CAD/CAM technology. The work environment was defined by conducting a detailed study of a reference design process, and key software elements for a CAD/CAM system have been defined, specifically for interactive design or experiment control processes. Further work is proceeding on executive, data management, geometry and graphics, and general utility software, and dynamic aspects of the programs being developed are outlined

A process improvement model for software verification and validation

NASA Technical Reports Server (NTRS)

Callahan, John; Sabolish, George

1994-01-01

We describe ongoing work at the NASA Independent Verification and Validation (IV&V) Facility to establish a process improvement model for software verification and validation (V&V) organizations. This model, similar to those used by some software development organizations, uses measurement-based techniques to identify problem areas and introduce incremental improvements. We seek to replicate this model for organizations involved in V&V on large-scale software development projects such as EOS and space station. At the IV&V Facility, a university research group and V&V contractors are working together to collect metrics across projects in order to determine the effectiveness of V&V and improve its application. Since V&V processes are intimately tied to development processes, this paper also examines the repercussions for development organizations in large-scale efforts.

A process improvement model for software verification and validation

NASA Technical Reports Server (NTRS)

Callahan, John; Sabolish, George

1994-01-01

We describe ongoing work at the NASA Independent Verification and Validation (IV&V) Facility to establish a process improvement model for software verification and validation (V&V) organizations. This model, similar to those used by some software development organizations, uses measurement-based techniques to identify problem areas and introduce incremental improvements. We seek to replicate this model for organizations involved in V&V on large-scale software development projects such as EOS and Space Station. At the IV&V Facility, a university research group and V&V contractors are working together to collect metrics across projects in order to determine the effectiveness of V&V and improve its application. Since V&V processes are intimately tied to development processes, this paper also examines the repercussions for development organizations in large-scale efforts.

Impact of Group Development Knowledge on Students' Perceived Importance and Confidence of Group Work Skills

ERIC Educational Resources Information Center

Coers, Natalie; Williams, Jennifer

2010-01-01

This study explored the impact of emphasis on the group development process on the perceived importance of and confidence in group work skills and students' perception of group work use in the collegiate classroom as developed by Tuckman and Jensen (1977). The purposive sample utilized in this study included 33 undergraduate students enrolled in…

This Is How We Do It: A Glimpse at Gamelab's Design Process

ERIC Educational Resources Information Center

Daer, Alice J.

2010-01-01

This article explicates the ways that developers working at an independent game company in New York City organized their development process around a deep concern for how players make meaning from their games. Two designers' descriptions of their processes are used to illustrate the company's commitment to developing games that invite…

Rapid process development of chromatographic process using direct analysis in real time mass spectrometry as a process analytical technology tool.

PubMed

Yan, Binjun; Chen, Teng; Xu, Zhilin; Qu, Haibin

2014-06-01

The concept of quality by design (QbD) is widely applied in the process development of pharmaceuticals. However, the additional cost and time have caused some resistance about QbD implementation. To show a possible solution, this work proposed a rapid process development method, which used direct analysis in real time mass spectrometry (DART-MS) as a process analytical technology (PAT) tool for studying the chromatographic process of Ginkgo biloba L., as an example. The breakthrough curves were fast determined by DART-MS at-line. A high correlation coefficient of 0.9520 was found between the concentrations of ginkgolide A determined by DART-MS and HPLC. Based on the PAT tool, the impacts of process parameters on the adsorption capacity were discovered rapidly, which showed a decreased adsorption capacity with the increase of the flow rate. This work has shown the feasibility and advantages of integrating PAT into QbD implementation for rapid process development. Copyright © 2014 Elsevier B.V. All rights reserved.

Interrelationships between Working Memory, Processing Speed, and Language Development in the Age Range 2-4 Years

ERIC Educational Resources Information Center

Newbury, Jayne; Klee, Thomas; Stokes, Stephanie F.; Moran, Catherine

2016-01-01

Purpose: This study explored associations between working memory and language in children aged 2-4 years. Method: Seventy-seven children aged 24-30 months were assessed on tests measuring language, visual cognition, verbal working memory (VWM), phonological short-term memory (PSTM), and processing speed. A standardized test of receptive and…

The Association of Social Work Boards' Licensure Examinations: A Review of Reliability and Validity Processes

ERIC Educational Resources Information Center

Marson, Stephen M.; DeAngelis, Donna; Mittal, Nisha

2010-01-01

Objectives: The purpose of this article is to create transparency for the psychometric methods employed for the development of the Association of Social Work Boards' (ASWB) exams. Results: The article includes an assessment of the macro (political) and micro (statistical) environments of testing social work competence. The seven-step process used…

Faith, Work, and Praxis: A Process Model of Integration for Christian Student Affairs Administrators

ERIC Educational Resources Information Center

Cliburn Allen, Cara; Alleman, Nathan F.

2017-01-01

The scholarship regarding faith integration practice has largely focused on faculty work; however, the field faces a paucity of data-supported approaches to understanding faith integration in the work lives of administrators. In this qualitative study, we developed a conceptual model that employs the concept of praxis to analyze the process by…

Does Multi-Level Intervention Enhance Work Process Knowledge?

ERIC Educational Resources Information Center

Leppanen, Anneli; Hopsu, Leila; Klemola, Soili; Kuosma, Eeva

2008-01-01

Purpose: The aim of this study is to find out the impacts of participation in formal training and development of work on the work process knowledge of school kitchen workers. Design/methodology/approach: The article describes a follow-up study on the consequences of intervention. In total, 108 subjects participated both in the interventions and in…

Designing a ticket to ride with the Cognitive Work Analysis Design Toolkit.

PubMed

Read, Gemma J M; Salmon, Paul M; Lenné, Michael G; Jenkins, Daniel P

2015-01-01

Cognitive work analysis has been applied in the design of numerous sociotechnical systems. The process used to translate analysis outputs into design concepts, however, is not always clear. Moreover, structured processes for translating the outputs of ergonomics methods into concrete designs are lacking. This paper introduces the Cognitive Work Analysis Design Toolkit (CWA-DT), a design approach which has been developed specifically to provide a structured means of incorporating cognitive work analysis outputs in design using design principles and values derived from sociotechnical systems theory. This paper outlines the CWA-DT and describes its application in a public transport ticketing design case study. Qualitative and quantitative evaluations of the process provide promising early evidence that the toolkit fulfils the evaluation criteria identified for its success, with opportunities for improvement also highlighted. The Cognitive Work Analysis Design Toolkit has been developed to provide ergonomics practitioners with a structured approach for translating the outputs of cognitive work analysis into design solutions. This paper demonstrates an application of the toolkit and provides evaluation findings.

Syntactic Recursion Facilitates and Working Memory Predicts Recursive Theory of Mind

PubMed Central

Arslan, Burcu; Hohenberger, Annette; Verbrugge, Rineke

2017-01-01

In this study, we focus on the possible roles of second-order syntactic recursion and working memory in terms of simple and complex span tasks in the development of second-order false belief reasoning. We tested 89 Turkish children in two age groups, one younger (4;6–6;5 years) and one older (6;7–8;10 years). Although second-order syntactic recursion is significantly correlated with the second-order false belief task, results of ordinal logistic regressions revealed that the main predictor of second-order false belief reasoning is complex working memory span. Unlike simple working memory and second-order syntactic recursion tasks, the complex working memory task required processing information serially with additional reasoning demands that require complex working memory strategies. Based on our results, we propose that children’s second-order theory of mind develops when they have efficient reasoning rules to process embedded beliefs serially, thus overcoming a possible serial processing bottleneck. PMID:28072823

Reports of Planetary Geology Program, 1982

NASA Technical Reports Server (NTRS)

Holt, H. E. (Compiler)

1982-01-01

Work conducted in the Planetary Geology program is summarized. The following categories are presented: outer solar system satellites; asteroids and comets; Venus; cratering processes and landform development; volcanic processes and landforms; aolian processes and landforms; fluvial processes and landform development; periglacial and permafrost processes; structure, tectonics and stratigraphy; remote sensing and regolith studies; geologic mapping, cartography and geodesy.

Free energy surfaces from nonequilibrium processes without work measurement

NASA Astrophysics Data System (ADS)

Adib, Artur B.

2006-04-01

Recent developments in statistical mechanics have allowed the estimation of equilibrium free energies from the statistics of work measurements during processes that drive the system out of equilibrium. Here a different class of processes is considered, wherein the system is prepared and released from a nonequilibrium state, and no external work is involved during its observation. For such "clamp-and-release" processes, a simple strategy for the estimation of equilibrium free energies is offered. The method is illustrated with numerical simulations and analyzed in the context of tethered single-molecule experiments.

Views and Experiences of Persons with Chronic Diseases about Strategies that Aim to Integrate and Re-Integrate Them into Work: A Systematic Review of Qualitative Studies.

PubMed

Esteban, Eva; Coenen, Michaela; Ito, Elizabeth; Gruber, Sonja; Scaratti, Chiara; Leonardi, Matilde; Roka, Olga; Vasilou, Evdokia; Muñoz-Murillo, Amalia; Ávila, Carolina C; Kovačič, Dare S; Ivandic, Ivana; Sabariego, Carla

2018-05-18

The effectiveness of strategies targeting professional integration and reintegration strongly depends on the experiences of participants. The aim of this systematic literature review is to synthesize European qualitative studies exploring views and experiences of persons with chronic conditions regarding strategies for integration and reintegration into work. The systematic search was conducted in Medline, PsycINFO, CDR-HTA, CDR-DARE and Cochrane Systematic Reviews. Overall, 24 studies published in English between January 2011 and April 2016 were included. Most studies were carried out in Nordic countries or in the UK, and most participants were persons with either mental or musculoskeletal disorders. Ten themes emerged: individual and holistic approach, clarity of strategy and processes, timing of rehabilitation processes, experience with professionals, at the workplace and with peer groups, changes in the understanding of health and work, active involvement in the process, competencies development and motivating aspects of work. Findings highlight, among others, the need to actively involve participants in the return to work process and to provide timely and clearly structured processes and interventions. This review provides stakeholders key information to develop, plan, implement and evaluate interventions to integrate and re-integrate persons with chronic conditions into work in Europe.

Views and Experiences of Persons with Chronic Diseases about Strategies that Aim to Integrate and Re-Integrate Them into Work: A Systematic Review of Qualitative Studies

PubMed Central

Ito, Elizabeth; Gruber, Sonja; Scaratti, Chiara; Roka, Olga; Vasilou, Evdokia; Muñoz-Murillo, Amalia; Ávila, Carolina C.; Kovačič, Dare S.; Ivandic, Ivana

2018-01-01

The effectiveness of strategies targeting professional integration and reintegration strongly depends on the experiences of participants. The aim of this systematic literature review is to synthesize European qualitative studies exploring views and experiences of persons with chronic conditions regarding strategies for integration and reintegration into work. The systematic search was conducted in Medline, PsycINFO, CDR-HTA, CDR-DARE and Cochrane Systematic Reviews. Overall, 24 studies published in English between January 2011 and April 2016 were included. Most studies were carried out in Nordic countries or in the UK, and most participants were persons with either mental or musculoskeletal disorders. Ten themes emerged: individual and holistic approach, clarity of strategy and processes, timing of rehabilitation processes, experience with professionals, at the workplace and with peer groups, changes in the understanding of health and work, active involvement in the process, competencies development and motivating aspects of work. Findings highlight, among others, the need to actively involve participants in the return to work process and to provide timely and clearly structured processes and interventions. This review provides stakeholders key information to develop, plan, implement and evaluate interventions to integrate and re-integrate persons with chronic conditions into work in Europe. PMID:29783671

Defining Incident Management Processes for CSIRTs: A Work in Progress

DTIC Science & Technology

2004-10-01

included on the diagrams, precluded our ability to keep the diagrams simple and readable. We thus moved information about roles and re- sponsibilities...Workflows The following tables contain informal notes taken during our process mapping development work. The notes correspond to the fields in the...a federally funded research and development center sponsored by the U.S. Department of Defense. Copyright 2004 Carnegie Mellon University. NO

Advanced in-duct sorbent injection for SO{sub 2} control. Final technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stouffer, M.R.; Withium, J.A.; Rosenhoover, W.A.

1994-12-01

The objective of this research project was to develop a second generation duct sorbent injection technology as a cost-effective compliance option for the 1990 Clean Air Act Amendments. Research and development work was focused on the Advanced Coolside process, which showed the potential for exceeding the original performance targets of 90% SO{sub 2} removal and 60% sorbent utilization. Process development was conducted in a 1000 acfm pilot plant. The pilot plant testing showed that the Advanced Coolside process can achieve 90% SO{sub 2} removal at sorbent utilizations up to 75%. The testing also showed that the process has the potentialmore » to achieve very high removal efficiency (90 to >99%). By conducting conceptual process design and economic evaluations periodically during the project, development work was focused on process design improvements which substantially lowered process capital and operating costs, A final process economic study projects capital costs less than one half of those for limestone forced oxidation wet FGD. Projected total SO{sub 2} control cost is about 25% lower than wet FGD for a 260 MWe plant burning a 2.5% sulfur coal. A waste management study showed the acceptability of landfill disposal; it also identified a potential avenue for by-product utilization which should be further investigated. Based on the pilot plant performance and on the above economic projections, future work to scale up the Advanced Coolside process is recommended.« less

A treatment program for individuals with deficient evaluative processing and consequent impaired social and risk judgement.

PubMed

Park, Norman W; Conrod, Brian; Hussain, Zahra; Murphy, Kelly J; Rewilak, Dmytro; Black, Sandra E

2003-01-01

The current study evaluated the effectiveness of a rehabilitation program developed to assist individuals such as AM who have impaired social and risk judgement. AM's difficulties developed after a severe traumatic brain injury that resulted in bilateral frontal and temporal lobe damage including damage to the amygdala. Previous work (Park et al., 2001) established that AM had impaired automatic processing of negative, but not positive evaluative information, and relatively spared processing of both types of evaluative information when using controlled or strategic processing. In the Strategic Evaluation of Alternatives (SEA) treatment program, AM was trained to compensate for his impairments by explicitly retrieving positive and negative attributes associated with potential actions prior to performing them. The SEA treatment focused specifically on improving AM's ability to obtain financial compensation for his work-related activities. Results showed improved performance on work-related activities and evidence of generalization. Analyses suggested that the process underlying improved performance was compensatory rather than restorative in nature. We discuss the implications of these results for the development of rehabilitation treatment for patients with impaired social and risk judgement.

Work Hope: Development and Initial Validation of a Measure

ERIC Educational Resources Information Center

Juntunen, Cindy L.; Wettersten, Kara Brita

2006-01-01

Hope is a core construct of positive psychology that has received only minimal application to work and vocational situations. C. R. Snyder (2000) conceptualized hope as a cognitive process with 3 primary components: goals, agency, and pathways. This article presents the development and validation of the Work Hope Scale (WHS), which was rationally…

Employability Skill Development in Work-Integrated Learning: Barriers and Best Practice

ERIC Educational Resources Information Center

Jackson, Denise

2015-01-01

Work-integrated learning (WIL) is widely considered instrumental in equipping new graduates with the required employability skills to function effectively in the work environment. Evaluation of WIL programs in enhancing skill development remains predominantly outcomes-focused with little attention to the process of what, how and from whom students…

Tone Series and the Nature of Working Memory Capacity Development

ERIC Educational Resources Information Center

Clark, Katherine M.; Hardman, Kyle O.; Schachtman, Todd R.; Saults, J. Scott; Glass, Bret A.; Cowan, Nelson

2018-01-01

Recent advances in understanding visual working memory, the limited information held in mind for use in ongoing processing, are extended here to examine auditory working memory development. Research with arrays of visual objects has shown how to distinguish the capacity, in terms of the "number" of objects retained, from the…

The relation between working memory capacity and auditory lateralization in children with auditory processing disorders.

PubMed

Moossavi, Abdollah; Mehrkian, Saiedeh; Lotfi, Yones; Faghihzadeh, Soghrat; sajedi, Hamed

2014-11-01

Auditory processing disorder (APD) describes a complex and heterogeneous disorder characterized by poor speech perception, especially in noisy environments. APD may be responsible for a range of sensory processing deficits associated with learning difficulties. There is no general consensus about the nature of APD and how the disorder should be assessed or managed. This study assessed the effect of cognition abilities (working memory capacity) on sound lateralization in children with auditory processing disorders, in order to determine how "auditory cognition" interacts with APD. The participants in this cross-sectional comparative study were 20 typically developing and 17 children with a diagnosed auditory processing disorder (9-11 years old). Sound lateralization abilities investigated using inter-aural time (ITD) differences and inter-aural intensity (IID) differences with two stimuli (high pass and low pass noise) in nine perceived positions. Working memory capacity was evaluated using the non-word repetition, and forward and backward digits span tasks. Linear regression was employed to measure the degree of association between working memory capacity and localization tests between the two groups. Children in the APD group had consistently lower scores than typically developing subjects in lateralization and working memory capacity measures. The results showed working memory capacity had significantly negative correlation with ITD errors especially with high pass noise stimulus but not with IID errors in APD children. The study highlights the impact of working memory capacity on auditory lateralization. The finding of this research indicates that the extent to which working memory influences auditory processing depend on the type of auditory processing and the nature of stimulus/listening situation. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Innovation in ambulatory care: a collaborative approach to redesigning the health care workplace.

PubMed

Johnson, Paula A; Bookman, Ann; Bailyn, Lotte; Harrington, Mona; Orton, Piper

2011-02-01

To improve the quality of patient care and work satisfaction of the physicians and staff at an ambulatory practice that had recently started an innovative model of clinical care for women. The authors used an inclusive process, collaborative interactive action research, to engage all physicians and staff members in assessing and redesigning their work environment. Based on key barriers to working effectively and integrating work and family identified in that process, a pilot project with new work practices and structures was developed, implemented, and evaluated. The work redesign process established cross-occupational care teams in specific clinical areas. Members of the teams built skills in assessing clinical operations in their practice areas, developed new levels of collaboration, and constructed new models of distributed leadership. The majority of participants reported an improvement in how their area functioned. Integrating work and family/personal life-particularly practices around flexible work arrangements-became an issue for team discussion and solutions, not a matter of individual accommodation by managers. By engaging the workforce, collaborative interactive action research can help achieve lasting change in the health care workplace and increase physicians' and staff members' work satisfaction. This "dual agenda" may be best achieved through a collaborative process where cross-occupational teams are responsible for workflow and outcomes and where the needs of patients and providers are integrated.

The relationship of working memory, inhibition, and response variability in child psychopathology.

PubMed

Verté, Sylvie; Geurts, Hilde M; Roeyers, Herbert; Oosterlaan, Jaap; Sergeant, Joseph A

2006-02-15

The aim of this study was to investigate the relationship between working memory and inhibition in children with attention deficit hyperactivity disorder (ADHD), high-functioning autism (HFA), and Tourette syndrome (TS), compared to normally developing children. Furthermore, the contribution of variation in processing speed on working memory and inhibition was investigated in these childhood psychopathologies. Four groups of children are reported in this study: 65 children with ADHD, 66 children with HFA, 24 children with TS, and 82 normal control children. All children were in the age range of 6-13 years. The relationship between working memory and inhibition was similar in children with ADHD, HFA, TS, and normally developing children. The relationship between both domains did not alter significantly for any of the groups, when variation in processing speed was taken into account. More symptoms of hyperactivity/impulsivity are related to a poorer inhibitory process and greater response variability. More symptoms of autism are related to a poorer working memory process. The current study showed that working memory, inhibition, and response variability, are distinct, but related cognitive domains in children with developmental psychopathologies. Research with experimental manipulations is needed to tackle the exact relationship between these cognitive domains.

Developing lay health worker policy in South Africa: a qualitative study

PubMed Central

2012-01-01

Background Over the past half decade South Africa has been developing, implementing and redeveloping its Lay Health Worker (LHW) policies. Research during this period has highlighted challenges with LHW programme implementation. These challenges have included an increased burden of care for female LHWs. The aim of this study was to explore contemporary LHW policy development processes and the extent to which issues of gender are taken up within this process. Methods The study adopted a qualitative approach to exploring policy development from the perspective of policy actors. Eleven policy actors (policy makers and policy commentators) were interviewed individually. Data from the interviews were analysed thematically. Results Considerations of LHW working conditions drove policy redevelopment. From the interviews it seems that gender as an issue never reached the policy making agenda. Although there was strong recognition that the working conditions of LHWs needed to be improved, poor working conditions were not necessarily seen as a gender concern. Our data suggests that in the process of defining the problem which the redeveloped policy had to address, gender was not included. There was no group or body who brought the issue of gender to the attention of policy developers. As such the issue of gender never entered the policy debates. These debates focused on whether it was appropriate to have LHWs, what LHW programme model should be adopted and whether or not LHWs should be incorporated into the formal health system. Conclusion LHW policy redevelopment focused on resolving issues of LHW working conditions through an active process involving many actors and strong debates. Within this process the issue of gender had no champion and never reached the LHW policy agenda. Future research may consider how to incorporate the voices of ordinary women into the policy making process. PMID:22410185

Ergonomic design intervention strategy for work tools development for women agro based workers in Northeast India.

PubMed

Chakrabarti, Debkumar; Bhattachheriya, Nandita

2012-01-01

Strategy for finding the appropriate strategy for work tool development has become a crucial issue in occupational wellness of varied nature of women workforce of Northeast India. This paper deals with ergonomics intervention through sustainable work tool design development process. Workers who frequently shift to different activities quite often in unorganised small-scale fruit processing units where productivity is directly related to the harvesting season require different work tools relevant to specific tasks and mostly workers themselves manage work tools of their own with available local resources. Whereas in contrast the tea-leaf pluckers are engaged in a single task throughout the year, and the work schedule and work equipment is decided and supplied to them based on the corporate decision where the workers do not have any individual control. Observations confirm the need for organising participatory workshops specific to trade based occupational well-being and different work tools for different tasks in mostly private owned unorganised sector. Implementation of single variety work tool development that supports a crucial component in tea-leaf plucking for which they are engaged in full time employment; and through a corporate decision a single design with its number of users makes a good effect.

Work Keys: Developing the Assessments.

ERIC Educational Resources Information Center

McLarty, Joyce R.

The American College Testing Program is developing a new program, Work Keys, a system to develop and assess employability skills. It consists of four components: (1) a systematic process for profiling job skill requirements; (2) assessments that measure learners' job skill levels; (3) procedures and formats for conveying assessment results so they…

Vocational Education Students' Generic Working Life Competencies: Developing a Self-Assessment Instrument

ERIC Educational Resources Information Center

Kyndt, Eva; Janssens, Ine; Coertjens, Liesje; Gijbels, David; Donche, Vincent; Van Petegem, Peter

2014-01-01

The current study reports on the process of developing a self-assessment instrument for vocational education students' generic working life competencies. The instrument was developed based on a competence framework and in close collaboration with several vocational education teachers and intermediary organisations offering various human…

From theory to 'measurement' in complex interventions: methodological lessons from the development of an e-health normalisation instrument.

PubMed

Finch, Tracy L; Mair, Frances S; O'Donnell, Catherine; Murray, Elizabeth; May, Carl R

2012-05-17

Although empirical and theoretical understanding of processes of implementation in health care is advancing, translation of theory into structured measures that capture the complex interplay between interventions, individuals and context remain limited. This paper aimed to (1) describe the process and outcome of a project to develop a theory-based instrument for measuring implementation processes relating to e-health interventions; and (2) identify key issues and methodological challenges for advancing work in this field. A 30-item instrument (Technology Adoption Readiness Scale (TARS)) for measuring normalisation processes in the context of e-health service interventions was developed on the basis on Normalization Process Theory (NPT). NPT focuses on how new practices become routinely embedded within social contexts. The instrument was pre-tested in two health care settings in which e-health (electronic facilitation of healthcare decision-making and practice) was used by health care professionals. The developed instrument was pre-tested in two professional samples (N=46; N=231). Ratings of items representing normalisation 'processes' were significantly related to staff members' perceptions of whether or not e-health had become 'routine'. Key methodological challenges are discussed in relation to: translating multi-component theoretical constructs into simple questions; developing and choosing appropriate outcome measures; conducting multiple-stakeholder assessments; instrument and question framing; and more general issues for instrument development in practice contexts. To develop theory-derived measures of implementation process for progressing research in this field, four key recommendations are made relating to (1) greater attention to underlying theoretical assumptions and extent of translation work required; (2) the need for appropriate but flexible approaches to outcomes measurement; (3) representation of multiple perspectives and collaborative nature of work; and (4) emphasis on generic measurement approaches that can be flexibly tailored to particular contexts of study.

Process Monitoring Evaluation and Implementation for the Wood Abrasive Machining Process

PubMed Central

Saloni, Daniel E.; Lemaster, Richard L.; Jackson, Steven D.

2010-01-01

Wood processing industries have continuously developed and improved technologies and processes to transform wood to obtain better final product quality and thus increase profits. Abrasive machining is one of the most important of these processes and therefore merits special attention and study. The objective of this work was to evaluate and demonstrate a process monitoring system for use in the abrasive machining of wood and wood based products. The system developed increases the life of the belt by detecting (using process monitoring sensors) and removing (by cleaning) the abrasive loading during the machining process. This study focused on abrasive belt machining processes and included substantial background work, which provided a solid base for understanding the behavior of the abrasive, and the different ways that the abrasive machining process can be monitored. In addition, the background research showed that abrasive belts can effectively be cleaned by the appropriate cleaning technique. The process monitoring system developed included acoustic emission sensors which tended to be sensitive to belt wear, as well as platen vibration, but not loading, and optical sensors which were sensitive to abrasive loading. PMID:22163477

Application of Advanced Signal Processing Techniques to Angle of Arrival Estimation in ATC Navigation and Surveillance Systems

DTIC Science & Technology

1982-06-23

Administration Systems Research and Development Service 14, Spseq Aese Ce ’ Washington, D.C. 20591 It. SeppkW•aae metm The work reported in this document was...consider sophisticated signal processing techniques as an alternative method of improving system performanceH Some work in this area has already taken place...demands on the frequency spectrum. As noted in Table 1-1, there has been considerable work on advanced signal processing in the MLS context

SCI-U: E-learning for patient education in spinal cord injury rehabilitation

PubMed Central

Shepherd, John D.; Badger-Brown, Karla M.; Legassic, Matthew S.; Walia, Saagar; Wolfe, Dalton L.

2012-01-01

Background/objectives To develop an online patient education resource for use in spinal cord injury rehabilitation. Participants The development process involved more than 100 subject-matter experts (SMEs) (rehabilitation professionals and consumers) from across Canada. Preliminary evaluation was conducted with 25 end-users. Methods An iterative development process was coordinated by a project team; SMEs (including patients) developed the content in working groups using wiki-based tools. Multiple rounds of feedback based on early prototypes helped improve the courses during development. Results Five courses were created, each featuring more than 45 minutes of video content and hundreds of media assets. Preliminary evaluation results indicate that users were satisfied by the courses and perceived them to be effective. Conclusions This is an effective process for developing multimedia patient education resources; the involvement of patients in all parts of the process was particularly helpful. Future work will focus on implementation, integration into clinical practice and other delivery formats (smart phones, tablets). PMID:23031169

M4SF-17LL010301071: Thermodynamic Database Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zavarin, M.; Wolery, T. J.

2017-09-05

This progress report (Level 4 Milestone Number M4SF-17LL010301071) summarizes research conducted at Lawrence Livermore National Laboratory (LLNL) within the Argillite Disposal R&D Work Package Number M4SF-17LL01030107. The DR Argillite Disposal R&D control account is focused on the evaluation of important processes in the analysis of disposal design concepts and related materials for nuclear fuel disposal in clay-bearing repository media. The objectives of this work package are to develop model tools for evaluating impacts of THMC process on long-term disposal of spent fuel in argillite rocks, and to establish the scientific basis for high thermal limits. This work is contributing tomore » the GDSA model activities to identify gaps, develop process models, provide parameter feeds and support requirements providing the capability for a robust repository performance assessment model by 2020.« less

The use of multiple representations and visualizations in student learning of introductory physics: An example from work and energy

NASA Astrophysics Data System (ADS)

Zou, Xueli

In the past three decades, physics education research has primarily focused on student conceptual understanding; little work has been conducted to investigate student difficulties in problem solving. In cognitive science and psychology, however, extensive studies have explored the differences in problem solving between experts and naive students. A major finding indicates that experts often apply qualitative representations in problem solving, but that novices use an equation-centered method. This dissertation describes investigations into the use of multiple representations and visualizations in student understanding and problem solving with the concepts of work and energy. A multiple-representation strategy was developed to help students acquire expertise in solving work-energy problems. In this approach, a typical work-energy problem is considered as a physical process. The process is first described in words-the verbal representation of the process. Next, a sketch or a picture, called a pictorial representation, is used to represent the process. This is followed by work-energy bar charts-a physical representation of the same processes. Finally, this process is represented mathematically by using a generalized work-energy equation. In terms of the multiple representations, the goal of solving a work- energy problem is to represent the physical process the more intuitive pictorial and diagrammatic physical representations. Ongoing assessment of student learning indicates that this multiple-representation technique is more effective than standard instruction methods in student problem solving. visualize this difficult-to-understand concept, a guided- inquiry learning activity using a pair of model carts and an experiment problem using a sandbag were developed. Assessment results have shown that these research-based materials are effective in helping students visualize this concept and give a pictorial idea of ``where the kinetic energy goes'' during inelastic collisions. The research and curriculum development was conducted in the context of the introductory calculus-based physics course. Investigations were carried out using common physics education research tools, including open-ended surveys, written test questions, and individual student interviews.

Using ergonomics checkpoints to support a participatory ergonomics intervention in an industrially developing country (IDC)--a case study.

PubMed

Helali, Faramarz

2009-01-01

To achieve ergonomics awareness in 3 subsidiary companies, an intervention team was formed. The aims of this study were to implement basic ergonomics through a participatory ergonomics intervention process that can support a continuous learning process and lead to an improvement in health and safety as well as in the work systems in the organization. The findings of this study (i.e., method, continuous learning and integration) were key to making the participatory ergonomics intervention successful. Furthermore, 4 issues of the ergonomics checkpoints (i.e., work schedules, work tasks, healthy work organization and learning) for assessing the work system were found suitable for both changing work schedules and for improving the work system. This paper describes the result of this project and also the experiences gained and the conclusions reached from using the International Labour Office's ergonomics checkpoints in the industries of industrially developing country.

36 CFR 1225.12 - How are records schedules developed?

Code of Federal Regulations, 2010 CFR

2010-07-01

... activity to identify records series, systems, and nonrecord materials. (c) Determine the appropriate scope of the records schedule items, e.g., individual series/system component, work process, group of related work processes, or broad program area. (d) Evaluate the period of time the agency needs each...

36 CFR 1225.12 - How are records schedules developed?

Code of Federal Regulations, 2011 CFR

2011-07-01

... activity to identify records series, systems, and nonrecord materials. (c) Determine the appropriate scope of the records schedule items, e.g., individual series/system component, work process, group of related work processes, or broad program area. (d) Evaluate the period of time the agency needs each...

36 CFR 1225.12 - How are records schedules developed?

Code of Federal Regulations, 2012 CFR

2012-07-01

... activity to identify records series, systems, and nonrecord materials. (c) Determine the appropriate scope of the records schedule items, e.g., individual series/system component, work process, group of related work processes, or broad program area. (d) Evaluate the period of time the agency needs each...

Towards an Intelligent Planning Knowledge Base Development Environment

NASA Technical Reports Server (NTRS)

Chien, S.

1994-01-01

ract describes work in developing knowledge base editing and debugging tools for the Multimission VICAR Planner (MVP) system. MVP uses artificial intelligence planning techniques to automatically construct executable complex image processing procedures (using models of the smaller constituent image processing requests made to the JPL Multimission Image Processing Laboratory.

Cognition-based development and evaluation of ergonomic user interfaces for medical image processing and archiving systems.

PubMed

Demiris, A M; Meinzer, H P

1997-01-01

Whether or not a computerized system enhances the conditions of work in the application domain, very much demands on the user interface. Graphical user interfaces seem to attract the interest of the users but mostly ignore some basic rules of visual information processing thus leading to systems which are difficult to use, lowering productivity and increasing working stress (cognitive and work load). In this work we present some fundamental ergonomic considerations and their application to the medical image processing and archiving domain. We introduce the extensions to an existing concept needed to control and guide the development of GUIs with respect to domain specific ergonomics. The suggested concept, called Model-View-Controller Constraints (MVCC), can be used to programmatically implement ergonomic constraints, and thus has some advantages over written style guides. We conclude with the presentation of existing norms and methods to evaluate user interfaces.

Work-related experiences of head and neck cancer survivors: an exploratory and descriptive qualitative study.

PubMed

Dewa, Carolyn S; Trojanowski, Lucy; Tamminga, Sietske J; Ringash, Jolie; McQuestion, Maurene; Hoch, Jeffrey S

2018-06-01

This exploratory and descriptive study contributes to the growing knowledge about the return-to-work (RTW) experience of head and neck cancer (HNC) survivors. Viewing RTW as a process, participants were asked to consider the work-related experience with HNC at different phases: (1) at diagnosis/pre-treatment, (2) working during treatment (if the respondent did not take a work disability leave), and (3) post-treatment/RTW (if the respondent took a work disability leave). Data were gathered in nine individual semi-structured in-depth interviews with patients receiving treatment at a quaternary cancer center's HNC clinic in Ontario, Canada. Using a constant comparative method of theme development, codes were identified in and derived from the data. Codes with similar characteristics were grouped, used to develop overarching themes, and were organized according to the RTW factors identified in the literature. Each phase has different barriers that are in turn addressed by different facilitators. As reflected in the literature, we found that RTW or the process of work continuation is complex. Many players and interactions contribute to the worker's experience. By recognizing that work-related experiences differ by phases, clinicians and employers can better support HNC survivors depending on the phase of the RTW process. Implications for Rehabilitation Our findings suggest that when rehabilitation specialists are working with survivors to develop interventions, the return-to-work phase and work context rather than diagnosis should be considered as a starting point. At every phase, supportive and empathetic managers are a key to successful work experiences for people who have been diagnosed and are being treated for head and neck cancer. Rehabilitation specialists should help survivors to seek supportive interactions with the environment that are essential to enable the ability to work.

[Work process and working conditions in poultry processing plants: report of a survey on occupational health surveillance].

PubMed

Oliveira, Paulo Antonio Barros; Mendes, Jussara Maria Rosa

2014-12-01

This article presents the report of a survey on health surveillance activities performed in poultry processing plants in the south of Brazil. It aims to contribute to an understanding of the work process developed, the growth of the sector, the organization of labor and the confrontation with the economic model of this sector, which has been exposing employees to working conditions that undermine their health. The working conditions identified are considered largely incompatible with health and human dignity. The study supports interinstitutional intervention, especially with the Public Ministry of Labor, criticizes the weak implementation of specific government interventions in health conditions in the industry and introduces the new Regulatory Standard 36 as a positive perspective for the near future.

A framework of knowledge creation processes in participatory simulation of hospital work systems.

PubMed

Andersen, Simone Nyholm; Broberg, Ole

2017-04-01

Participatory simulation (PS) is a method to involve workers in simulating and designing their own future work system. Existing PS studies have focused on analysing the outcome, and minimal attention has been devoted to the process of creating this outcome. In order to study this process, we suggest applying a knowledge creation perspective. The aim of this study was to develop a framework describing the process of how ergonomics knowledge is created in PS. Video recordings from three projects applying PS of hospital work systems constituted the foundation of process mining analysis. The analysis resulted in a framework revealing the sources of ergonomics knowledge creation as sequential relationships between the activities of simulation participants sharing work experiences; experimenting with scenarios; and reflecting on ergonomics consequences. We argue that this framework reveals the hidden steps of PS that are essential when planning and facilitating PS that aims at designing work systems. Practitioner Summary: When facilitating participatory simulation (PS) in work system design, achieving an understanding of the PS process is essential. By applying a knowledge creation perspective and process mining, we investigated the knowledge-creating activities constituting the PS process. The analysis resulted in a framework of the knowledge-creating process in PS.

Adult Education in Tanzania: Life-Long Process for National Development.

ERIC Educational Resources Information Center

Mbunda, Daniel

For Tanzanians, education to be meaningful implies human development through education. Tanzania's commitment to build a socialist state, based on traditional African socialism, is also a commitment to socialist education, the necessary tool for social development. Since work is a lifelong duty for any socialist, work-oriented education is also a…

Status report on the land processes aircraft science management operations working group

NASA Technical Reports Server (NTRS)

Lawless, James G.; Mann, Lisa J.

1991-01-01

Since its inception three years ago, the Land Processes Aircraft Science Management Operations Working Group (MOWG) provided recommendations on the optimal use of the Agency's aircraft in support of the Land Processes Science Program. Recommendations covered topics such as aircraft and sensor usage, development of long-range plans, Multisensor Airborne Campaigns (MAC), program balance, aircraft sensor databases, new technology and sensor development, and increased University scientist participation in the program. Impacts of these recommendations improved the efficiency of various procedures including the flight request process, tracking of flight hours, and aircraft usage. The group also created a bibliography focused on publications produced by Land Processes scientists from the use of the aircraft program, surveyed NASA funded PI's on their participation in the aircraft program, and developed a planning template for multi-sensor airborne campaigns. Benefits from these activities are summarized.

Implementation of cold risk management in occupational safety, occupational health and quality practices. Evaluation of a development process and its effects at the finnish maritime administration.

PubMed

Risikko, Tanja; Remes, Jouko; Hassi, Juhani

2008-01-01

Cold is a typical environmental risk factor in outdoor work in northern regions. It should be taken into account in a company's occupational safety, health and quality systems. A development process for improving cold risk management at the Finnish Maritime Administration (FMA) was carried out by FMA and external experts. FMA was to implement it. Three years after the development phase, the outcomes and implementation were evaluated. The study shows increased awareness about cold work and few concrete improvements. Concrete improvements in occupational safety and health practices could be seen in the pilot group. However, organization-wide implementation was insufficient, the main reasons being no organization-wide practices, unclear process ownership, no resources and a major reorganization process. The study shows a clear need for expertise supporting implementation. The study also presents a matrix for analyzing the process.

Work process, performance and professional profile of a Hearing Health Network: reference for satisfaction.

PubMed

Escarce, Andrezza Gonzalez; Lemos, Stela Maris Aguiar; Carvalho, Sirley Alves da Silva

2016-01-01

To analyze the correlation between the satisfaction of professionals from the Hearing Health Care network in two micro-regions of Minas Gerais state and the sociodemographic profile, work process, and work performance in the health service. This is a cross-sectional, observational, analytic study with a non-probabilistic sample including 34 professionals from the Hearing Health Care services. Data collection occurred through individual interviews in the municipality of professional practice. Associations between the Professional Satisfaction variable and the explanatory variables Sociodemographic Data, Work Routine, and Developed Actions were conducted. Professionals with graduate studies were more satisfied with the human resources policy and the activities developed, whereas health civil servants showed more satisfaction with the wage policy and the work schedule. The correlation analysis between work process and satisfaction revealed a moderate positive correlation between items such as Health Promotion Actions, Satisfaction with Diagnostic Equipment, and Satisfaction with Maintenance Equipment. The present study revealed a higher level of satisfaction among professionals with graduate studies (human resources policy and activities developed) and civil servants (wage policy and work schedule). The relevance of this study lies on the important role that health professionals play on the Health Care Network. Additionally, the study of satisfaction level can provide a search for improvements, considering that satisfied professionals not only improve service quality, but also show greater creativity, commitment, and performance.

CYCLOPS-3 System Research.

ERIC Educational Resources Information Center

Marill, Thomas; And Others

The aim of the CYCLOPS Project research is the development of techniques for allowing computers to perform visual scene analysis, pre-processing of visual imagery, and perceptual learning. Work on scene analysis and learning has previously been described. The present report deals with research on pre-processing and with further work on scene…

Modelling and Simulation for Requirements Engineering and Options Analysis

DTIC Science & Technology

2010-05-01

should be performed to work successfully in the domain; and process-based techniques model the processes that occur in the work domain. There is a crisp ...acad/sed/sedres/ dm /erg/cwa. DRDC Toronto CR 2010-049 39 23. Can the current technique for developing simulation models for assessments

Chreods, homeorhesis and biofields: Finding the right path for science through Daoism.

PubMed

Gare, Arran

2017-12-01

C.H. Waddington's concepts of 'chreods' (canalized paths of development) and 'homeorhesis' (the tendency to return to a path), each associated with 'morphogenetic fields', were conceived by him as a contribution to complexity theory. Subsequent developments in complexity theory have largely ignored Waddington's work and efforts to advance it. Waddington explained the development of the concept of chreod as the influence on his work of Alfred North Whitehead's process philosophy, notably, the concept of concrescence as a self-causing process. Processes were recognized as having their own dynamics, rather than being explicable through their components or external agents. Whitehead recognized the tendency to think only in terms of such 'substances' as a bias of European thought, claiming in his own philosophy 'to approximate more to some strains of Indian, or Chinese, thought, than to western Asiatic, or European, thought.' Significantly, the theoretical biologist who comes closest to advancing Waddington's research program, also marginalized, is Mae-Wan Ho. Noting this bias, and embracing Whitehead's and Waddington's efforts to free biology from assumptions dominating Western thought to advance an ontology of creative causal processes, I will show how later developments of complexity theory, most importantly, Goodwin's work on oscillations, temporality and morphology, Vitiello's dissipative quantum brain dynamics, Salthe's work on hierarchy theory, biosemiotics inspired by Peirce and von Uexküll, Robert Rosen's work on anticipatory systems, together with category theory and biomathics, can augment while being augmented by Waddington's work, while further advancing Mae-Wan Ho's radical research program with its quest to understand the reality of consciousness. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Development of a measure of work motivation for a meta-theory of motivation.

PubMed

Ryan, James C

2011-06-01

This study presents a measure of work motivation designed to assess the motivational concepts of the meta-theory of motivation. These concepts include intrinsic process motivation, goal internalization motivation, instrumental motivation, external self-concept motivation, and internal self-concept motivation. Following a process of statement development and identification, six statements for each concept were presented to a sample of working professionals (N = 330) via a paper-and-pencil questionnaire. Parallel analysis supported a 5-factor solution, with a varimax rotation identifying 5 factors accounting for 48.9% of total variance. All 5 scales had Cronbach alpha coefficients above .70. Limitations of the newly proposed questionnaire and suggestions for its further development and use are discussed.

Workflow-Based Software Development Environment

NASA Technical Reports Server (NTRS)

Izygon, Michel E.

2013-01-01

The Software Developer's Assistant (SDA) helps software teams more efficiently and accurately conduct or execute software processes associated with NASA mission-critical software. SDA is a process enactment platform that guides software teams through project-specific standards, processes, and procedures. Software projects are decomposed into all of their required process steps or tasks, and each task is assigned to project personnel. SDA orchestrates the performance of work required to complete all process tasks in the correct sequence. The software then notifies team members when they may begin work on their assigned tasks and provides the tools, instructions, reference materials, and supportive artifacts that allow users to compliantly perform the work. A combination of technology components captures and enacts any software process use to support the software lifecycle. It creates an adaptive workflow environment that can be modified as needed. SDA achieves software process automation through a Business Process Management (BPM) approach to managing the software lifecycle for mission-critical projects. It contains five main parts: TieFlow (workflow engine), Business Rules (rules to alter process flow), Common Repository (storage for project artifacts, versions, history, schedules, etc.), SOA (interface to allow internal, GFE, or COTS tools integration), and the Web Portal Interface (collaborative web environment

Gaining Control of Occupational Injury and Illness in the U.S. Navy Civilian Work Force

DTIC Science & Technology

1990-01-16

developing survey instruments, interviews were conducted with key participants at the naval shipyards, naval public works center, naval air repair...currently in place at naval shipyards. After compiling data on those processes, NAVCAMPRO was developed in an effort to take control of the management of...physician. The attending physician participates with the physical therapist and supervisor in the development of a work -hardening program for the

Cedar Project---Original goals and progress to date

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cybenko, G.; Kuck, D.; Padua, D.

1990-11-28

This work encompasses a broad attack on high speed parallel processing. Hardware, software, applications development, and performance evaluation and visualization as well as research topics are proposed. Our goal is to develop practical parallel processing for the 1990's.

Safe procedure development to manage hazardous drugs in the workplace.

PubMed

Gaspar Carreño, Marisa; Achau Muñoz, Rubén; Torrico Martín, Fátima; Agún Gonzalez, Juan José; Sanchez Santos, Jose Cristobal; Cercos Lletí, Ana Cristina; Ramos Orozco, Pedro

2017-03-01

To develop a safety working procedure for the employees in the Intermutual Hospital de Levante (HIL) in those areas of activity that deal with the handling of hazardous drugs (MP). The procedure was developed in six phases: 1) hazard definition; 2) definition and identification of processes and development of general correct work practices about hazardous drugs' selection and special handling; 3) detection, selection and set of specific recommendations to handle with hazardous drugs during the processes of preparation and administration included in the hospital GFT; 4) categorization of risk during the preparation/administration and development of an identification system; 5) information and training of professionals; 6) implementation of the identification measures and prevention guidelines. Six processes were detected handling HD. During those processes, thirty HD were identified included in the hospital GFT and a safer alternative was found for 6 of them. The HD were classified into 4 risk categories based on those measures to be taken during the preparation and administration of each of them. The development and implementation of specific safety-work processes dealing with medication handling, allows hospital managers to accomplish effectively with their legal obligations about the area of prevention and provides healthcare professional staff with the adequate techniques and safety equipment to avoid possible dangers and risks of some drugs. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Technique development for conducting mechanical tests to study the pore formation process in case of material fracture

NASA Astrophysics Data System (ADS)

Magomedova, D. K.; Efimov, M. A.; Murashkin, M. Yu.

2018-05-01

The main purpose of this work was the development of an experimental technique for search and analysis of pore formation in the presented material. Geometry of the samples, the procedure of experiment and processing the samples for investigation were developed.

High Resolution Near Real Time Image Processing and Support for MSSS Modernization

NASA Astrophysics Data System (ADS)

Duncan, R. B.; Sabol, C.; Borelli, K.; Spetka, S.; Addison, J.; Mallo, A.; Farnsworth, B.; Viloria, R.

2012-09-01

This paper describes image enhancement software applications engineering development work that has been performed in support of Maui Space Surveillance System (MSSS) Modernization. It also includes R&D and transition activity that has been performed over the past few years with the objective of providing increased space situational awareness (SSA) capabilities. This includes Air Force Research Laboratory (AFRL) use of an FY10 Dedicated High Performance Investment (DHPI) cluster award -- and our selection and planned use for an FY12 DHPI award. We provide an introduction to image processing of electro optical (EO) telescope sensors data; and a high resolution image enhancement and near real time processing and summary status overview. We then describe recent image enhancement applications development and support for MSSS Modernization, results to date, and end with a discussion of desired future development work and conclusions. Significant improvements to image processing enhancement have been realized over the past several years, including a key application that has realized more than a 10,000-times speedup compared to the original R&D code -- and a greater than 72-times speedup over the past few years. The latest version of this code maintains software efficiency for post-mission processing while providing optimization for image processing of data from a new EO sensor at MSSS. Additional work has also been performed to develop low latency, near real time processing of data that is collected by the ground-based sensor during overhead passes of space objects.

Knowledge work productivity effect on quality of knowledge work in software development process in SME

NASA Astrophysics Data System (ADS)

Yusoff, Mohd Zairol; Mahmuddin, Massudi; Ahmad, Mazida

2016-08-01

Knowledge and skill are necessary to develop the capability of knowledge workers. However, there is very little understanding of what the necessary knowledge work (KW) is, and how they influence the quality of knowledge work or knowledge work productivity (KWP) in software development process, including that in small and medium-sized (SME) enterprise. The SME constitutes a major part of the economy and it has been relatively unsuccessful in developing KWP. Accordingly, this paper seeks to explore the influencing dimensions of KWP that effect on the quality of KW in SME environment. First, based on the analysis of the existing literatures, the key characteristics of KW productivity are defined. Second, the conceptual model is proposed, which explores the dimensions of the KWP and its quality. This study analyses data collected from 150 respondents (based on [1], who involve in SME in Malaysia and validates the models by using structural equation modeling (SEM). The results provide an analysis of the effect of KWP on the quality of KW and business success, and have a significant relevance for both research and practice in the SME

Cultural Differences in the Development of Processing Speed

ERIC Educational Resources Information Center

Kail, Robert V.; McBride-Chang, Catherine; Ferrer, Emilio; Cho, Jeung-Ryeul; Shu, Hua

2013-01-01

The aim of the present work was to examine cultural differences in the development of speed of information processing. Four samples of US children ("N" = 509) and four samples of East Asian children ("N" = 661) completed psychometric measures of processing speed on two occasions. Analyses of the longitudinal data indicated…

The Primary Physical Education Curriculum Process: More Complex That You Might Think!!

ERIC Educational Resources Information Center

Jess, Mike; Carse, Nicola; Keay, Jeanne

2016-01-01

In this paper, we present the curriculum development process as a complex, iterative and integrated phenomenon. Building on the early work of Stenhouse [1975, "An Introduction to Curriculum Research and Development". London: Heinemann Educational], we position the teacher at the heart of this process and extend his ideas by exploring how…

Process Consultation: Its Role in Organization Development.

ERIC Educational Resources Information Center

Schein, Edgar H.

This volume focuses on the process by which the consultant builds readiness for organizational development (OD) programs, actually conducts training, and works with the key individuals of an organization as part of an OD program. Part I describes in some detail the human processes in organizations--communication, functional roles of group members,…

Growth behind the Mirror: The Family Therapy Consortium's Group Process.

ERIC Educational Resources Information Center

Wendorf, Donald J.; And Others

1985-01-01

Charts the development of the Family Therapy Consortium, a group that provides supervision and continuing education in family therapy and explores the peer supervision process at work in the consortium. The focus is on individual and group development, which are seen as complementary aspects of the same growth process. (Author/NRB)

Rehabilitation centers in change: participatory methods for managing redesign and renovation.

PubMed

Lahtinen, Marjaana; Nenonen, Suvi; Rasila, Heidi; Lehtelä, Jouni; Ruohomäki, Virpi; Reijula, Kari

2014-01-01

The aim of this article is to describe a set of participatory methods that we have either developed or modified for developing future work and service environments to better suit renewable rehabilitation processes. We discuss the methods in a larger framework of change process model and participatory design. Rehabilitation organizations are currently in transition; customer groups, financing, services, and the processes of rehabilitation centers are changing. The pressure for change challenges the centers to develop both their processes and facilities. There is a need for methods that support change management. Four participatory methods were developed: future workshop, change survey, multi-method assessment tool, and participatory design generator cards. They were tested and evaluated in three rehabilitation centers at the different phases of their change process. The developed methods were considered useful in creating a mutual understanding of the change goals between different stakeholders, providing a good picture of the work community's attitudes toward the change, forming an integrated overview of the built and perceived environment, inspiring new solutions, and supporting the management in steering the change process. The change process model described in this article serves as a practical framework that combined the viewpoints of organizational and facility development. However, participatory design continues to face challenges concerning communication between different stakeholders, and further development of the methods and processes is still needed. Intervention studies could provide data on the success factors that enhance the transformations in the rehabilitation sector. Design process, methodology, organizational transformation, planning, renovation.

Implementing a High Performance Work Place in the Distribution and Logistics Industry: Recommendations for Leadership & Team Member Development

ERIC Educational Resources Information Center

McCann, Laura Harding

2012-01-01

Leadership development and employee engagement are two elements critical to the success of organizations. In response to growth opportunities, our Distribution and Logistics company set on a course to implement High Performance Work Place to meet the leadership and employee engagement needs, and to find methods for improving work processes. This…

"It's Not Like a Normal 9 to 5!": The Learning Journeys of Media Production Apprentices in Distributed Working Conditions

ERIC Educational Resources Information Center

Lahiff, Ann; Guile, David

2016-01-01

An apprenticeship in media production in England is at the centre of this case study exploration. The context is exemplified by the organisation of the process of production around project teams and the development of project-based working cultures. Given these developments, the working conditions and learning opportunities presented to…

The Role of the Company in Generating Skills. The Learning Effects of Work Organization. The Netherlands.

ERIC Educational Resources Information Center

Onstenk, Jeroen; Voncken, Eva

The impact of developments in work organizations on the skilling process in the Netherlands was studied through a macro analysis of available statistical information about the development of education for work in the Netherlands and case studies of three Dutch firms. The macro analysis focused on the following: vocational education in the…

Training Students’ Science Process Skills through Didactic Design on Work and Energy

NASA Astrophysics Data System (ADS)

Ramayanti, S.; Utari, S.; Saepuzaman, D.

2017-09-01

Science Process Skills (SPS) has not been optimally trained to the students in the learning activity. The aim of this research is finding the ways to train SPS on the subject of Work and Energy. One shot case study design is utilized in this research that conducted on 32 students in one of the High Schools in Bandung. The students’ SPS responses were analyzed by the development SPS based assessment portfolios. The results of this research showed the didactic design that had been designed to training the identifying variables skills, formulating hypotheses, and the experiment activity shows the development. But the didactic design to improve the students’ predicting skills shows that the development is still not optimal. Therefore, in the future studies need to be developed the didactic design on the subject Work and Energy that exercising these skills.

From Process to Product: Your Risk Process at Work

NASA Technical Reports Server (NTRS)

Kundrot, Craig E.; Fogarty, Jenifer; Charles, John; Buquo, Lynn; Sibonga, Jean; Alexander, David; Horn, Wayne G.; Edwards, J. Michelle

2010-01-01

The Space Life Sciences Directorate (SLSD) and Human Research Program (HRP) at the NASA/Johnson Space Center work together to address and manage the human health and performance risks associated with human space flight. This includes all human system requirements before, during, and after space flight, providing for research, and managing the risk of adverse long-term health outcomes for the crew. We previously described the framework and processes developed for identifying and managing these human system risks. The focus of this panel is to demonstrate how the implementation of the framework and associated processes has provided guidance in the management and communication of human system risks. The risks of early onset osteoporosis, CO2 exposure, and intracranial hypertension in particular have all benefitted from the processes developed for human system risk management. Moreover, we are continuing to develop capabilities, particularly in the area of information architecture, which will also be described. We are working to create a system whereby all risks and associated actions can be tracked and related to one another electronically. Such a system will enhance the management and communication capabilities for the human system risks, thereby increasing the benefit to researchers and flight surgeons.

Development of electromagnetic welding facility of flat plates for nuclear industry

NASA Astrophysics Data System (ADS)

Kumar, Rajesh; Sahoo, Subhanarayan; Sarkar, Biswanath; Shyam, Anurag

2017-04-01

Electromagnetic pulse welding (EMPW) process, one of high speed welding process uses electromagnetic force from discharged current through working coil, which develops a repulsive force between the induced current flowing parallel and in opposite direction. For achieving the successful weldment using this process the design of working coil is the most important factor due to high magnetic field on surface of work piece. In case of high quality flat plate welding factors such as impact velocity, angle of impact standoff distance, thickness of flyer and overlap length have to be chosen carefully. EMPW has wide applications in nuclear industry, automotive industry, aerospace, electrical industries. However formability and weldability still remain major issues. Due to ease in controlling the magnetic field enveloped inside tubes, the EMPW has been widely used for tube welding. In case of flat components control of magnetic field is difficult. Hence the application of EMPW gets restricted. The present work attempts to make a novel contribution by investigating the effect of process parameters on welding quality of flat plates. The work emphasizes the approaches and engineering calculations required to effectively use of actuator in EMPW of flat components.

"Working towards being ready": A grounded theory study of how practising midwives maintain their ongoing competence to practise their profession.

PubMed

Calvert, Susan; Smythe, Elizabeth; McKenzie-Green, Barbara

2017-07-01

to present a grounded theory research study explaining how New Zealand midwives maintain their ongoing competence to practise their profession. grounded theory, an interpretive emergent research methodology was used to examine the process of maintaining competence in midwifery practice. New Zealand urban and rural practice settings. twenty-six midwives from across New Zealand were interviewed and asked about maintaining their competence to practise. Five midwives were interviewed twice, to explore the emerging findings and as one method of member checking. the grounded theory of 'working towards being ready' describes a continuous process in which midwives engage as they work to maintain practice competence. The component parts comprise professional positioning, identifying needs, strategizing solutions and reflecting on practice. The process is contextual, diverse and is influenced by the practice setting where the salient conditions of resourcing, availability and opportunity for engagement in activities are significant. across the midwifery profession, midwives in New Zealand are currently working under the generic umbrella of midwifery practice. Midwives work across a range of practice arenas in diverse ways focussed on providing safe care and require a range of professional development activities germane to their area of practice. When the midwife has access to professional development pertinent to their practice, women and the profession benefit. As there is diversity of practice, then mandated processes for ongoing competence need to have flexibility to reflect that diversity. midwives engage in development that allows them to remain current in practice and that enables them to provide appropriate care to women and their babies. As a consequence they can develop expertise in certain aspects of midwifery. Mandated processes that require engagement in activities aimed at demonstration of competence should be evaluated and tailored to ensure they meet the needs of the developing profession. Copyright © 2017 Elsevier Ltd. All rights reserved.

Self Improving Methods for Materials and Process Design

DTIC Science & Technology

1998-08-31

using inductive coupling techniques. The first phase of the work focuses on developing an artificial neural network learning for function approximation...developing an artificial neural network learning algorithm for time-series prediction. The third phase of the work focuses on model selection. We have

The Epistemological Beliefs of Social Work Students

ERIC Educational Resources Information Center

Anderson-Meger, Jennifer I.

2013-01-01

Research has shown that undergraduate students come into social work programs with an epistemological belief system that values personal experience over critical thinking processes. Epistemological development and self-efficacy are important factors to facilitating identity as a learner and developing critical thinking aptitudes. This qualitative,…

Automated platform for designing multiple robot work cells

NASA Astrophysics Data System (ADS)

Osman, N. S.; Rahman, M. A. A.; Rahman, A. A. Abdul; Kamsani, S. H.; Bali Mohamad, B. M.; Mohamad, E.; Zaini, Z. A.; Rahman, M. F. Ab; Mohamad Hatta, M. N. H.

2017-06-01

Designing the multiple robot work cells is very knowledge-intensive, intricate, and time-consuming process. This paper elaborates the development process of a computer-aided design program for generating the multiple robot work cells which offer a user-friendly interface. The primary purpose of this work is to provide a fast and easy platform for less cost and human involvement with minimum trial and errors adjustments. The automated platform is constructed based on the variant-shaped configuration concept with its mathematical model. A robot work cell layout, system components, and construction procedure of the automated platform are discussed in this paper where integration of these items will be able to automatically provide the optimum robot work cell design according to the information set by the user. This system is implemented on top of CATIA V5 software and utilises its Part Design, Assembly Design, and Macro tool. The current outcomes of this work provide a basis for future investigation in developing a flexible configuration system for the multiple robot work cells.

Returning to work - a long-term process reaching beyond the time frames of multimodal non-specific back pain rehabilitation.

PubMed

Hellman, Therese; Jensen, Irene; Bergström, Gunnar; Busch, Hillevi

2015-01-01

To explore and describe health professionals' experience of working with return to work (RTW) in multimodal rehabilitation for people with non-specific back pain. An interview study using qualitative content analysis. Fifteen participants were interviewed, all were working with multimodal rehabilitation for people with non-specific back pain in eight different rehabilitation units. The participants experienced RTW as a long-term process reaching beyond the time frames of the multimodal rehabilitation (MMR). Their attitudes and, their patients' condition, impacted on their work which focused on psychological and physical well-being as well as participation in everyday life. They often created an action plan for the RTW process, however the responsibility for its realisation was transferred to other actors. The participants described limited interventions in connection with patients' workplaces. Recommended support in the RTW process in MMR comprises the provision of continuous supervision of vocational issues for the health care professionals, the development of guidelines and a checklist for how to work in close collaboration with patients' workplaces and employers, the provision of long-term follow-up in relation to the patients' work, and the development of proper interventions in order to promote transitions between all the different actors involved. Rehabilitation programs targeting return to work (RTW) for people with non-specific back pain needs to include features concretely focusing on vocational issues. Health and RTW is often seen as a linear process in which health comes before RTW. Rehabilitation programs could be tailored to better address the reciprocal relationship between health and work, in which they are interconnected and affect each other. The RTW process is reaching beyond the time frames of the multimodal rehabilitation but further support from the patients are asked for. The rehabilitation programs needs to be designed to provide long-term follow-up in relation to the patients' work.

The Application of Computers to Library Technical Processing

ERIC Educational Resources Information Center

Veaner, Allen B.

1970-01-01

Describes computer applications to acquisitions and technical processing and reports in detail on Stanford's development work in automated technical processing. Author is Assistant Director for Bibliographic Operation, Stanford University Libraries. (JB)

Developing New Teacher Inquiry and Criticality: The Role of Online Discussions

ERIC Educational Resources Information Center

Unwin, Adam

2015-01-01

This work concerns the professional development of UK teachers in their first year of teaching. It is interested in how the online discussions (ODs) these teachers undertook as part of the Master of Teaching contributed to this development process. The teachers worked in online tutor groups made up of teachers from different schools, phases…

The Interaction of Work Adjustment and Attachment Theory: Employment Counseling Implications

ERIC Educational Resources Information Center

Renfro-Michel, Edina L.; Burlew, Larry D.; Robert, Tracey

2009-01-01

Career development is a lifelong process beginning with career choice. However, career choice alone does not guarantee career success. Rather than focus on choosing a career, the theory of work adjustment (TWA) focuses on the process of becoming an exemplary employee through each stage of an individual's career. Within TWA, employee relationships…

Beginnings and Endings in Social Work Supervision: The Interaction between Attachment and Developmental Processes

ERIC Educational Resources Information Center

Bennett, Susanne; Deal, Kathleen Holtz

2009-01-01

This article discusses the interaction of attachment processes and stages of social work student development within the field supervisory relationship and suggests ways supervisors can modify interactions with students. Attachment theory and research provide a framework for understanding innate capacities of students and the relational dynamics of…

Exploring Senior Level Athletic Training Students' Perceptions on Burnout and Work-Life Balance

ERIC Educational Resources Information Center

Barrett, Jessica L.; Mazerolle, Stephanie M.; Eason, Christianne M.

2016-01-01

Context: The professional socialization process enables athletic training students (ATSs) to gain insights into behaviors, values, and attitudes that characterize their chosen profession. However, the process often focuses on skill development over professional issues. ATSs may be exposed to burnout and work-life conflict, which may impact their…

From the Analysis of Work-Processes to Designing Competence-Based Occupational Standards and Vocational Curricula

ERIC Educational Resources Information Center

Tutlys, Vidmantas; Spöttl, Georg

2017-01-01

Purpose: This paper aims to explore methodological and institutional challenges on application of the work-process analysis approach in the design and development of competence-based occupational standards for Lithuania. Design/methodology/approach: The theoretical analysis is based on the review of scientific literature and the analysis of…

Work zone impacts assessment : an approach to assess and management work zone safety and mobility impacts of road projects

DOT National Transportation Integrated Search

2006-05-01

To help transportation agencies understand and implement the provisions of the Rule, FHWA has : developed four guidance documents. This Guide is designed to help transportation agencies : develop and/or update their own policies, processes, and proce...

Roadmap of Advanced GNC and Image Processing Algorithms for Fully Autonomous MSR-Like Rendezvous Missions

NASA Astrophysics Data System (ADS)

Strippoli, L. S.; Gonzalez-Arjona, D. G.

2018-04-01

GMV extensively worked in many activities aimed at developing, validating, and verifying up to TRL-6 advanced GNC and IP algorithms for Mars Sample Return rendezvous working under different ESA contracts on the development of advanced algorithms for VBN sensor.

Workplace bullying in health care affects the meaning of work.

PubMed

MacIntosh, Judith; Wuest, Judith; Gray, Marilyn Merritt; Cronkhite, Marcella

2010-08-01

Our purpose in this grounded theory study was to explore the impact of workplace bullying (WPB) on women working in health care. We analyzed interviews with 21 women, professionals and nonprofessionals. The women experienced a change in their meaning of work (MOW) when they had experienced WPB, and they addressed this change through a process we called the shifting meaning of work. This process has three stages. The first, developing insight, involves recognizing causes of changed MOW as external. In the second stage, resisting, women defend against changed MOW by sustaining acceptable MOW and work performances, and by confronting causes. In the final stage, rebuilding, women try to adapt and modify approaches to work by coming to terms, adjusting work attitudes, and investing in self. We identified implications of this process for managing health and work issues with women, health care providers, and employers.

The relative contributions of processing speed and cognitive load to working memory accuracy in multiple sclerosis.

PubMed

Leavitt, Victoria M; Lengenfelder, Jean; Moore, Nancy B; Chiaravalloti, Nancy D; DeLuca, John

2011-06-01

Cognitive symptoms of multiple sclerosis (MS) include processing-speed deficits and working memory impairment. The precise manner in which these deficits interact in individuals with MS remains to be explicated. We hypothesized that providing more time on a complex working memory task would result in performance benefits for individuals with MS relative to healthy controls. Fifty-three individuals with clinically definite MS and 36 matched healthy controls performed a computerized task that systematically manipulated cognitive load. The interval between stimuli presentations was manipulated to provide increasing processing time. The results confirmed that individuals with MS who have processing-speed deficits significantly improve in performance accuracy when given additional time to process the information in working memory. Implications of these findings for developing appropriate cognitive rehabilitation interventions are discussed.

Development of vapor phase hydrogen peroxide sterilization process for spacecraft applications

NASA Technical Reports Server (NTRS)

Rohatgi, N.; Schubert, W.; Knight, J.; Quigley, M.; Forsberg, G.; Ganapathi, G.; Yarbrough, C.; Koukol, R.

2001-01-01

This paper will present test data and discussion on the work we are conducting at JPL to address the following issues: 1) efficacy of sterilization process; 2) diffusion of hydrogen peroxide under sterilization process conditions into hard to reach places; 3) materials and components compatibility with the sterilization process and 4) development of methodology to protect sensitive components from hydrogen peroxide vapor.

Responding to climate change in national forests: a guidebook for developing adaptation options

Treesearch

David L. Peterson; Connie I. Millar; Linda A. Joyce; Michael J. Furniss; Jessica E. Halofsky; Ronald P. Neilson; Toni Lyn Morelli

2011-01-01

This guidebook contains science-based principles, processes, and tools necessary to assist with developing adaptation options for national forest lands. The adaptation process is based on partnerships between local resource managers and scientists who work collaboratively to understand potential climate change effects, identify important resource issues, and develop...

The Process of Professional School Counselor Multicultural Competency Development: A Grounded Theory

ERIC Educational Resources Information Center

Berry, Jessica L.

2013-01-01

Professional School Counselors who work in schools with a range of student diversity are posed with a unique set of challenges which require them to develop their multicultural competencies. The following qualitative study examined the process of developing multicultural competence for four professional school counselors. The four professional…

Developing a taxonomy for mission architecture definition

NASA Technical Reports Server (NTRS)

Neubek, Deborah J.

1990-01-01

The Lunar and Mars Exploration Program Office (LMEPO) was tasked to define candidate architectures for the Space Exploration Initiative to submit to NASA senior management and an externally constituted Outreach Synthesis Group. A systematic, structured process for developing, characterizing, and describing the alternate mission architectures, and applying this process to future studies was developed. The work was done in two phases: (1) national needs were identified and categorized into objectives achievable by the Space Exploration Initiative; and (2) a program development process was created which both hierarchically and iteratively describes the program planning process.

Optimisation Of Cutting Parameters Of Composite Material Laser Cutting Process By Taguchi Method

NASA Astrophysics Data System (ADS)

Lokesh, S.; Niresh, J.; Neelakrishnan, S.; Rahul, S. P. Deepak

2018-03-01

The aim of this work is to develop a laser cutting process model that can predict the relationship between the process input parameters and resultant surface roughness, kerf width characteristics. The research conduct is based on the Design of Experiment (DOE) analysis. Response Surface Methodology (RSM) is used in this work. It is one of the most practical and most effective techniques to develop a process model. Even though RSM has been used for the optimization of the laser process, this research investigates laser cutting of materials like Composite wood (veneer)to be best circumstances of laser cutting using RSM process. The input parameters evaluated are focal length, power supply and cutting speed, the output responses being kerf width, surface roughness, temperature. To efficiently optimize and customize the kerf width and surface roughness characteristics, a machine laser cutting process model using Taguchi L9 orthogonal methodology was proposed.

NASA Supportability Engineering Implementation Utilizing DoD Practices and Processes

NASA Technical Reports Server (NTRS)

Smith, David A.; Smith, John V.

2010-01-01

The Ares I design and development program made the determination early in the System Design Review Phase to utilize DoD ILS and LSA approach for supportability engineering as an integral part of the system engineering process. This paper is to provide a review of the overall approach to design Ares-I with an emphasis on a more affordable, supportable, and sustainable launch vehicle. Discussions will include the requirements development, design influence, support concept alternatives, ILS and LSA planning, Logistics support analyses/trades performed, LSA tailoring for NASA Ares Program, support system infrastructure identification, ILS Design Review documentation, Working Group coordination, and overall ILS implementation. At the outset, the Ares I Project initiated the development of the Integrated Logistics Support Plan (ILSP) and a Logistics Support Analysis process to provide a path forward for the management of the Ares-I ILS program and supportability analysis activities. The ILSP provide the initial planning and coordination between the Ares-I Project Elements and Ground Operation Project. The LSA process provided a system engineering approach in the development of the Ares-I supportability requirements; influence the design for supportability and development of alternative support concepts that satisfies the program operability requirements. The LSA planning and analysis results are documented in the Logistics Support Analysis Report. This document was required during the Ares-I System Design Review (SDR) and Preliminary Design Review (PDR) review cycles. To help coordinate the LSA process across the Ares-I project and between programs, the LSA Report is updated and released quarterly. A System Requirement Analysis was performed to determine the supportability requirements and technical performance measurements (TPMs). Two working groups were established to provide support in the management and implement the Ares-I ILS program, the Integrated Logistics Support Working Group (ILSWG) and the Logistics Support Analysis Record Working Group (LSARWG). The Ares I ILSWG is established to assess the requirements and conduct, evaluate analyses and trade studies associated with acquisition logistic and supportability processes and to resolve Ares I integrated logistics and supportability issues. It established a strategic collaborative alliance for coordination of Logistics Support Analysis activates in support of the integrated Ares I vehicle design and development of logistics support infrastructure. A Joint Ares I - Orion LSAR Working Group was established to: 1) Guide the development of Ares-I and Orion LSAR data and serve as a model for future Constellation programs, 2) Develop rules and assumptions that will apply across the Constellation program with regards to the program's LSAR development, and 3) Maintain the Constellation LSAR Style Guide.

Flight Dynamics Mission Support and Quality Assurance Process

NASA Technical Reports Server (NTRS)

Oh, InHwan

1996-01-01

This paper summarizes the method of the Computer Sciences Corporation Flight Dynamics Operation (FDO) quality assurance approach to support the National Aeronautics and Space Administration Goddard Space Flight Center Flight Dynamics Support Branch. Historically, a strong need has existed for developing systematic quality assurance using methods that account for the unique nature and environment of satellite Flight Dynamics mission support. Over the past few years FDO has developed and implemented proactive quality assurance processes applied to each of the six phases of the Flight Dynamics mission support life cycle: systems and operations concept, system requirements and specifications, software development support, operations planing and training, launch support, and on-orbit mission operations. Rather than performing quality assurance as a final step after work is completed, quality assurance has been built in as work progresses in the form of process assurance. Process assurance activities occur throughout the Flight Dynamics mission support life cycle. The FDO Product Assurance Office developed process checklists for prephase process reviews, mission team orientations, in-progress reviews, and end-of-phase audits. This paper will outline the evolving history of FDO quality assurance approaches, discuss the tailoring of Computer Science Corporations's process assurance cycle procedures, describe some of the quality assurance approaches that have been or are being developed, and present some of the successful results.

Developing the JPL Engineering Processes

NASA Technical Reports Server (NTRS)

Linick, Dave; Briggs, Clark

2004-01-01

This paper briefly recounts the recent history of process reengineering at the NASA Jet Propulsion Laboratory, with a focus on the engineering processes. The JPL process structure is described and the process development activities of the past several years outlined. The main focus of the paper is on the current process structure, the emphasis on the flight project life cycle, the governance approach that lead to Flight Project Practices, and the remaining effort to capture process knowledge at the detail level of the work group.

Professional Competence Development of the Social Work Specialists in the Period of Study in the System of Additional Education

ERIC Educational Resources Information Center

Davletkaliev, Denis Kuanyshevich; Zueva, Natalia Konstantinovna; Lebedeva, Natalya Vasilevna; Mkrtumova, Irina Vladimirovna; Timofeeva, Olga

2015-01-01

The goal of this work is the study of psychological-pedagogical approaches to the understanding of the idea of professional competence of social work specialists as well as the role of study in the system of additional educations in professional-personal development of the listeners. In the process of study of this problem we define main…

The Development of Real-Time Stability Supports Visual Working Memory Performance: Young Children's Feature Binding Can Be Improved through Perceptual Structure

ERIC Educational Resources Information Center

Simmering, Vanessa R.; Wood, Chelsey M.

2017-01-01

Working memory is a basic cognitive process that predicts higher-level skills. A central question in theories of working memory development is the generality of the mechanisms proposed to explain improvements in performance. Prior theories have been closely tied to particular tasks and/or age groups, limiting their generalizability. The cognitive…

Equipped for Change: Development and Implementation of a Case Statement at an Urban Community College

ERIC Educational Resources Information Center

Krishnan, Sathasivam

2010-01-01

This action research study examined the process of creation and implementation of a case statement for an urban community college foundation. An instrumental case study methodology was used in examining this process. The study chronicled a successful participatory development process that allowed a number of stakeholders to effectively work on…

Biomass Direct Liquefaction Options. TechnoEconomic and Life Cycle Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tews, Iva J.; Zhu, Yunhua; Drennan, Corinne

The purpose of this work was to assess the competitiveness of two biomass to transportation fuel processing routes, which were under development in Finland, the U.S. and elsewhere. Concepts included fast pyrolysis (FP), and hydrothermal liquefaction (HTL), both followed by hydrodeoxygenation, and final product refining. This work was carried out as a collaboration between VTT (Finland), and PNNL (USA). The public funding agents for the work were Tekes in Finland and the Bioenergy Technologies Office of the U.S. Department of Energy. The effort was proposed as an update of the earlier comparative technoeconomic assessment performed by the IEA Bioenergy Directmore » Biomass Liquefaction Task in the 1980s. New developments in HTL and the upgrading of the HTL biocrude product triggered the interest in reinvestigating this comparison of these biomass liquefaction processes. In addition, developments in FP bio-oil upgrading had provided additional definition of this process option, which could provide an interesting comparison.« less

Using intervention mapping to develop a work-related guidance tool for those affected by cancer.

PubMed

Munir, Fehmidah; Kalawsky, Katryna; Wallis, Deborah J; Donaldson-Feilder, Emma

2013-01-05

Working-aged individuals diagnosed and treated for cancer require support and assistance to make decisions regarding work. However, healthcare professionals do not consider the work-related needs of patients and employers do not understand the full impact cancer can have upon the employee and their work. We therefore developed a work-related guidance tool for those diagnosed with cancer that enables them to take the lead in stimulating discussion with a range of different healthcare professionals, employers, employment agencies and support services. The tool facilitates discussions through a set of questions individuals can utilise to find solutions and minimise the impact cancer diagnosis, prognosis and treatment may have on their employment, sick leave and return to work outcomes. The objective of the present article is to describe the systematic development and content of the tool using Intervention Mapping Protocol (IMP). The study used the first five steps of the intervention mapping process to guide the development of the tool. A needs assessment identified the 'gaps' in information/advice received from healthcare professionals and other stakeholders. The intended outcomes and performance objectives for the tool were then identified followed by theory-based methods and an implementation plan. A draft of the tool was developed and subjected to a two-stage Delphi process with various stakeholders. The final tool was piloted with 38 individuals at various stages of the cancer journey. The tool was designed to be a self-led tool that can be used by any person with a cancer diagnosis and working for most types of employers. The pilot study indicated that the tool was relevant and much needed. Intervention Mapping is a valuable protocol for designing complex guidance tools. The process and design of this particular tool can lend itself to other situations both occupational and more health-care based.

Using intervention mapping to develop a work-related guidance tool for those affected by cancer

PubMed Central

2013-01-01

Background Working-aged individuals diagnosed and treated for cancer require support and assistance to make decisions regarding work. However, healthcare professionals do not consider the work-related needs of patients and employers do not understand the full impact cancer can have upon the employee and their work. We therefore developed a work-related guidance tool for those diagnosed with cancer that enables them to take the lead in stimulating discussion with a range of different healthcare professionals, employers, employment agencies and support services. The tool facilitates discussions through a set of questions individuals can utilise to find solutions and minimise the impact cancer diagnosis, prognosis and treatment may have on their employment, sick leave and return to work outcomes. The objective of the present article is to describe the systematic development and content of the tool using Intervention Mapping Protocol (IMP). Methods The study used the first five steps of the intervention mapping process to guide the development of the tool. A needs assessment identified the ‘gaps’ in information/advice received from healthcare professionals and other stakeholders. The intended outcomes and performance objectives for the tool were then identified followed by theory-based methods and an implementation plan. A draft of the tool was developed and subjected to a two-stage Delphi process with various stakeholders. The final tool was piloted with 38 individuals at various stages of the cancer journey. Results The tool was designed to be a self-led tool that can be used by any person with a cancer diagnosis and working for most types of employers. The pilot study indicated that the tool was relevant and much needed. Conclusions Intervention Mapping is a valuable protocol for designing complex guidance tools. The process and design of this particular tool can lend itself to other situations both occupational and more health-care based. PMID:23289708

Integration of Speech and Natural Language

DTIC Science & Technology

1988-04-01

major activities: • Development of the syntax and semantics components for natural language processing. • Integration of the developed syntax and...evaluating the performance of speech recognition algonthms developed K» under the Strategic Computing Program. grs Our work on natural language processing...included the developement of a grammar (syntax) that uses the Uiuficanon gnmmaj formaMsm (an augmented context free formalism). The Unification

Developmental Career Counseling.

ERIC Educational Resources Information Center

O'Brien, Michael T.

This paper outlines a developmental self psychology for use by career counselors with career clients. It offers a definition of a psychological self, draws from the work of Mead, Vygotsky, and Kohut to develop an understanding of the processes involved in the development and internalization of a psychological self, and connects the work of career…

Teacher Identity Work in Mathematics Teacher Education

ERIC Educational Resources Information Center

Neumayer-Depiper, Jill

2013-01-01

Becoming a teacher is not developing an identity, but is developing identity as a continuous process of constructing and deconstructing understandings within the complexities of social practice, beliefs, experiences, and social norms. I take up this stance on identity as articulated in Judith Butler's (1999) work with gender identity and…

School-to-Work Project. Final Report.

ERIC Educational Resources Information Center

National Advisory Council on Vocational Education, Washington, DC.

The document reviews the School-to-Work Project, which has been concerned with improving and developing the school component of the job placement process. Research, design, development, and dissemination phases and results are traced from 1972-1976 through the following stages: (1) Research, 1972-74, involving a literature search to identify…

"Organization Development": How It Works, What It's Becoming, Why It Pays Off.

ERIC Educational Resources Information Center

Sears, Woody H.

1979-01-01

Distinguishes between organizational development (OD) and therapy. OD is defined as a mechanism for problem solving in complex socio-technical systems. Describes possible drawbacks and advantages of the OD process. Provides examples of how OD has helped managers and non-managers work together. (CSS)

The Work/Family Challenge: A Key Career Development Issue.

ERIC Educational Resources Information Center

Kahnweiler, William M; Kahnweiler, Jennifer B.

1992-01-01

A few corporations are responding to the impact of family structural changes on workers' ability to balance their roles with flexible benefits and schedules and with training. Work/family issues are an integral part of career and life decision making and must be incorporated into the career development process. (SK)

The development of real-time stability supports visual working memory performance: Young children's feature binding can be improved through perceptual structure.

PubMed

Simmering, Vanessa R; Wood, Chelsey M

2017-08-01

Working memory is a basic cognitive process that predicts higher-level skills. A central question in theories of working memory development is the generality of the mechanisms proposed to explain improvements in performance. Prior theories have been closely tied to particular tasks and/or age groups, limiting their generalizability. The cognitive dynamics theory of visual working memory development has been proposed to overcome this limitation. From this perspective, developmental improvements arise through the coordination of cognitive processes to meet demands of different behavioral tasks. This notion is described as real-time stability, and can be probed through experiments that assess how changing task demands impact children's performance. The current studies test this account by probing visual working memory for colors and shapes in a change detection task that compares detection of changes to new features versus swaps in color-shape binding. In Experiment 1, 3- to 4-year-old children showed impairments specific to binding swaps, as predicted by decreased real-time stability early in development; 5- to 6-year-old children showed a slight advantage on binding swaps, but 7- to 8-year-old children and adults showed no difference across trial types. Experiment 2 tested the proposed explanation of young children's binding impairment through added perceptual structure, which supported the stability and precision of feature localization in memory-a process key to detecting binding swaps. This additional structure improved young children's binding swap detection, but not new-feature detection or adults' performance. These results provide further evidence for the cognitive dynamics and real-time stability explanation of visual working memory development. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Electrokinetic decontamination of concrete. Final report, August 3, 1993--September 15, 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-12-31

The ELECTROSORB{reg_sign} {open_quotes}C{close_quotes} process is an electrokinetic process for decontaminating concrete. ELECTROSORB{reg_sign} {open_quotes}C{close_quotes} uses a carpet-like extraction pad which is placed on the contaminated concrete surface. An electrolyte solution is circulated from a supporting module. This module keeps the electrolyte solution clean. The work is advancing through the engineering development stage with steady progress toward a full scale demonstration unit which will be ready for incorporation in the DOE Large Scale Demonstration Program by Summer 1997. A demonstration was carried out at the Mound Facility in Miamisburg, Ohio, in June 1996. Third party verification by EG&G verified the effectiveness ofmore » the process. Results of this work and the development work that proceeded are described herein.« less

Learning from Inconsistency

NASA Technical Reports Server (NTRS)

Easterbrook, Steve

1996-01-01

This position paper argues that inconsistencies that occur during the development of a software specification offer an excellent way of learning more about the development process. We base this argument on our work on inconsistency management. Much attention has been devoted recently to the need to allow inconsistencies to occur during software development, to facilitate flexible development strategies, especially for collaborative work. Recent work has concentrated on reasoning in the presence of inconsistency, tracing inconsistencies with 'pollution markers' and supporting resolution. We argue here that one of the most important aspects of inconsistency is the learning opportunity it provides. We are therefore concerned with how to capture this learning outcome so that its significance is not lost. We present a small example of how apprentice software engineers learn from their mistakes, and outline how an inconsistency management tool could support this learning. We then argue that the approach can be used more generally as part of continuous process improvement.

Decision Support System Requirements Definition for Human Extravehicular Activity Based on Cognitive Work Analysis

PubMed Central

Miller, Matthew James; McGuire, Kerry M.; Feigh, Karen M.

2016-01-01

The design and adoption of decision support systems within complex work domains is a challenge for cognitive systems engineering (CSE) practitioners, particularly at the onset of project development. This article presents an example of applying CSE techniques to derive design requirements compatible with traditional systems engineering to guide decision support system development. Specifically, it demonstrates the requirements derivation process based on cognitive work analysis for a subset of human spaceflight operations known as extravehicular activity. The results are presented in two phases. First, a work domain analysis revealed a comprehensive set of work functions and constraints that exist in the extravehicular activity work domain. Second, a control task analysis was performed on a subset of the work functions identified by the work domain analysis to articulate the translation of subject matter states of knowledge to high-level decision support system requirements. This work emphasizes an incremental requirements specification process as a critical component of CSE analyses to better situate CSE perspectives within the early phases of traditional systems engineering design. PMID:28491008

Decision Support System Requirements Definition for Human Extravehicular Activity Based on Cognitive Work Analysis.

PubMed

Miller, Matthew James; McGuire, Kerry M; Feigh, Karen M

2017-06-01

The design and adoption of decision support systems within complex work domains is a challenge for cognitive systems engineering (CSE) practitioners, particularly at the onset of project development. This article presents an example of applying CSE techniques to derive design requirements compatible with traditional systems engineering to guide decision support system development. Specifically, it demonstrates the requirements derivation process based on cognitive work analysis for a subset of human spaceflight operations known as extravehicular activity . The results are presented in two phases. First, a work domain analysis revealed a comprehensive set of work functions and constraints that exist in the extravehicular activity work domain. Second, a control task analysis was performed on a subset of the work functions identified by the work domain analysis to articulate the translation of subject matter states of knowledge to high-level decision support system requirements. This work emphasizes an incremental requirements specification process as a critical component of CSE analyses to better situate CSE perspectives within the early phases of traditional systems engineering design.

Computational Models of Relational Processes in Cognitive Development

ERIC Educational Resources Information Center

Halford, Graeme S.; Andrews, Glenda; Wilson, William H.; Phillips, Steven

2012-01-01

Acquisition of relational knowledge is a core process in cognitive development. Relational knowledge is dynamic and flexible, entails structure-consistent mappings between representations, has properties of compositionality and systematicity, and depends on binding in working memory. We review three types of computational models relevant to…

Lexical Morphology: Structure, Process, and Development

ERIC Educational Resources Information Center

Jarmulowicz, Linda; Taran, Valentina L.

2013-01-01

Recent work has demonstrated the importance of derivational morphology to later language development and has led to a consensus that derivation is a lexical process. In this review, derivational morphology is discussed in terms of lexical representation models from both linguistic and psycholinguistic perspectives. Input characteristics, including…

Dry fermentation of manure with straw in continuous plug flow reactor: Reactor development and process stability at different loading rates.

PubMed

Patinvoh, Regina J; Kalantar Mehrjerdi, Adib; Sárvári Horváth, Ilona; Taherzadeh, Mohammad J

2017-01-01

In this work, a plug flow reactor was developed for continuous dry digestion processes and its efficiency was investigated using untreated manure bedded with straw at 22% total solids content. This newly developed reactor worked successfully for 230days at increasing organic loading rates of 2.8, 4.2 and 6gVS/L/d and retention times of 60, 40 and 28days, respectively. Organic loading rates up to 4.2gVS/L/d gave a better process stability, with methane yields up to 0.163LCH 4 /gVS added /d which is 56% of the theoretical yield. Further increase of organic loading rate to 6gVS/L/d caused process instability with lower volatile solid removal efficiency and cellulose degradation. Copyright © 2016 Elsevier Ltd. All rights reserved.

New irradiation facilities for development of production methods of medical radionuclides at cyclotrons at Forschungszentrum Jülich

NASA Astrophysics Data System (ADS)

Spellerberg, S.; Scholten, B.; Spahn, I.; Felden, O.; Gebel, R.; Qaim, S. M.; Bai, M.; Neumaier, B.

2017-05-01

An essential basis for research and development work on radiopharmaceuticals is the efficient production of radionuclides of high quality. In this process research-oriented studies aiming for elucidation of biochemical processes require novel products. The radionuclide development at INM-5 entails basic research, e.g. the determination of nuclear reaction data, as well as technical aspects of practical production, such as high-current targetry, chemical separation, formulation and quality control. In this work developments, adaptation and optimization of irradiation facilities at the BC 1710, JULIC as Injector of COSY and COSY itself are summarized, which shall allow the extension of radionuclide production possibilities, aiming at innovations in medical applications.

The minimal work cost of information processing

NASA Astrophysics Data System (ADS)

Faist, Philippe; Dupuis, Frédéric; Oppenheim, Jonathan; Renner, Renato

2015-07-01

Irreversible information processing cannot be carried out without some inevitable thermodynamical work cost. This fundamental restriction, known as Landauer's principle, is increasingly relevant today, as the energy dissipation of computing devices impedes the development of their performance. Here we determine the minimal work required to carry out any logical process, for instance a computation. It is given by the entropy of the discarded information conditional to the output of the computation. Our formula takes precisely into account the statistically fluctuating work requirement of the logical process. It enables the explicit calculation of practical scenarios, such as computational circuits or quantum measurements. On the conceptual level, our result gives a precise and operational connection between thermodynamic and information entropy, and explains the emergence of the entropy state function in macroscopic thermodynamics.

The Organization of Teaching Process for the Development of Key Competencies (Case Study: Future Managers)

ERIC Educational Resources Information Center

Khusainova, Guzel R.; Galeeva, Farida T.; Giniyatullina, Diana R.; Tarasova, Natalya M.; Tsareva, Ekaterina E.

2016-01-01

This article is focused on the development of the organizational forms of future managers training for the development of their key competencies, namely, creativity and the ability to work in a team. The analysis of works of the researchers in the field of management and pedagogics shows that small groups as an organizational form has great…

The "Messy" Business of Academic Developers Leading Other Academic Developers: Critical Reflection on a Curriculum Realignment Exercise

ERIC Educational Resources Information Center

Thomas, Sharon; Cordiner, Moira

2014-01-01

Little has been written about academic developers (ADs) working in teams leading other ADs. This paper chronicles the experience of a group of ADs in one Australian university working on a curriculum realignment exercise. Unexpectedly the dominant theme in participants' reflections was group dynamics, not the process. We were confronted by…

Working memory and the design of health materials: a cognitive factors perspective.

PubMed

Wilson, Elizabeth A H; Wolf, Michael S

2009-03-01

Working memory and other supportive cognitive processes involved in learning are reviewed in the context of developing patient education materials. We specifically focus on the impact of certain design factors such as text format and syntax, the inclusion of images, and the choice of modality on individuals' ability to understand and remember health information. A selective review of relevant cognitive and learning theories is discussed with regard to their potential impact on the optimal design of health materials. Working memory is measured as an individual's capacity to hold and manipulate information in active consciousness. It is limited by necessity, and well-designed health materials can effectively minimize extraneous cognitive demands placed on individuals, making working memory resources more available to better process content-related information. Further research is needed to evaluate specific design principles and identify ideal uses of print versus video-based forms of communication for conveying information. The process of developing health materials should account for the cognitive demands that extrinsic factors such as modality place on patients.

Psychosocial work conditions, perceived stress, perceived muscular tension, and neck/shoulder symptoms among medical secretaries.

PubMed

Larsman, Pernilla; Kadefors, Roland; Sandsjö, Leif

2013-01-01

Unfavorable psychosocial working conditions are hypothesized to lead to perceived stress, which, in turn, can be related to an increased risk of development of neck/shoulder symptoms through increased and sustained muscle activation. The aim of the present study was to test this hypothesized process model among medical secretaries, a female-dominated profession characterized by a high amount of visual display unit use and a high prevalence of neck/shoulder symptoms. In this cross-sectional study, a questionnaire survey was conducted among medical secretaries (n = 200). The proposed process model was tested using a path model framework. The results indicate that high work demands were related to high perceived stress, which in turn was related to a high perceived muscle tension and neck/shoulder symptoms. Low influence at work was not related to perceived stress, but was directly related to a high perceived muscle tension. In general, these cross-sectional results lend tentative support for the hypothesis that adverse psychosocial work conditions (high work demands) may contribute to the development of neck/shoulder symptoms through the mechanism of stress-induced sustained muscular activation. This process model needs to be further tested in longitudinal studies.

EVALUATING THE ENVIRONMENTAL FRIENDLINESS, ECONOMICS, AND ENERGY EFFICIENCY OF CHEMICAL PROCESSES: HEAT INTEGRATION

EPA Science Inventory

The design and improvement of chemical processes can be very challenging. The earlier energy conservation, process economics and environmental aspects are incorporated into the process development, the easier and less expensive it is to alter the process design. In this work diff...

Wiki as a tool for microbiology teaching, learning and assessment.

PubMed

Sampaio-Maia, B; Maia, J S; Leitão, S; Amaral, M; Vieira-Marques, P

2014-05-01

Evidence suggests that cooperative learning and peer-assessment fosters students' ability to work with others and may lead to better cognitive outcomes and higher achievement. This work aimed to assess the use of an online collaborative tool for the teaching/learning and assessment of Microbiology. A total of 144 students were grouped and assigned to create wiki entries as well as to peer review wikis created by colleagues (peer-assessment process) using the Wiki module from Moodle Virtual Learning Environment (MVLE). MVLE actions log was used for tracking students' activity. The number of student's actions within wiki did not present a strong correlation with wiki scores, so it should not be used as a heavy evaluation parameter. The amount of work developed between members of the same group differed significantly, suggesting that final scores should be attributed individually. When peer-assessment process was implemented, the number of editing actions increased, suggesting that the peer-assessment strategy encourages the development of a better work. The vast majority of students execute the work in the last 10% of the period assigned for task development, which can be counter-productive for a truly collaborative work. Wiki revealed to be a useful tool for Microbiology teaching/learning and assessment, promoting collaborative work, promoting virtual mobility and facilitating the real-time monitoring of the students' work. This pedagogical project promoted also the involvement of students in their assessment process, encouraging their critical sense and quest for Excellency. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Pedagogical processes in healthcare: an exploratory study of pedagogic work with patients and next of kin.

PubMed

Hult, Håkan; Lindblad Fridh, Marianne; Lindh Falk, Annika; Thörne, Karin

2009-12-01

Care and education have much in common, and work in the healthcare sector is closely associated with learning and teaching. It is felt that many in the healthcare and medical services are not aware of their pedagogic skills and how they can be developed. FRAME OF REFERENCE: Belonging to a community of practice means that you share perspectives, methods and language. The aim is to describe the pedagogical discourse by identifying pedagogical processes and studying the staff's awareness of such processes or situations in which a pedagogical approach would be useful in their work with patients and next of kin. A qualitative study based on individual and group interviews. The analysis is directed by grounded theory. The pedagogical processes varied in length and quality. Most were unplanned and were usually embedded in treatment. The pedagogical process is linear (planning, goal setting, teaching and evaluating) in an educational setting but we found that the beginning and end can be unclear and the goals can be vague or non-existent. The pedagogical process is best described using the concepts Read, Guide and Provide learning support. The pedagogical discourse in healthcare is almost silent. Data indicate that at the collective level there is very little support for professional development of pedagogical ability. Tacit knowledge may therefore remain silent even though it may be possible to formulate and describe it. There is a strong need to focus on the pedagogical parts of the work and to encourage and support the development of professional pedagogical knowledge.

Representing the work of medical protocols for organizational simulation.

PubMed Central

Fridsma, D. B.

1998-01-01

Developing and implementing patient care protocols within a specific organizational setting requires knowledge of the protocol, the organization, and the way in which the organization does its work. Computer-based simulation tools have been used in many industries to provide managers with prospective insight into problems of work process and organization design mismatch. Many of these simulation tools are designed for well-understood routine work processes in which there are few contingent tasks. In this paper, we describe theoretic that make it possible to simulate medical protocols using an information-processing theory framework. These simulations will allow medical administrators to test different protocol and organizational designs before actually using them within a particular clinical setting. PMID:9929231

Improving Virtual Team Collaboration Outcomes through Collaboration Process Structuring

ERIC Educational Resources Information Center

Dittman, Dawn R.; Hawkes, Mark; Deokar, Amit V.; Sarnikar, Surendra

2010-01-01

The ability to collaborate in a virtual team is a necessary skill set for today's knowledge workers and students to be effective in their work. Past research indicates that knowledge workers and students need to establish a formal process to perform work, develop clear goals and objectives, and facilitate better communication among team members.…

The Application of a Model of Turnover in Work Organizations to the Student Attrition Process. Air Forum 1981 Paper.

ERIC Educational Resources Information Center

Bean, John P.

A theoretical model of turnover in work organizations was applied to the college student dropout process at a major midwestern land grant university. The 854 freshmen women subjects completed a questionnaire that included measures for 14 independent variables: grades, practical value, development, routinization, instrumental communication,…

Creative Process Mentoring: Teaching the "Making" in Dance-Making

ERIC Educational Resources Information Center

Lavender, Larry

2006-01-01

Within the Western fine arts tradition of concert and theatrical dance, new dances may be created in any number of ways. No matter how dance making begins, however, unless the work is to be improvised afresh each time it is performed, a process of developing, revising, and "setting" the work needs to take place. To move confidently and…

Trowel Trade Work Processes. Pre-Apprenticeship Phase 1 Training.

ERIC Educational Resources Information Center

Lane Community Coll., Eugene, OR.

This self-paced student training module on trowel trade work processes is part of the course, Trowel Trades, which was developed for Preapprenticeship Phase 1 Training. (A companion instructor's guide is available separately as CE 032 868.) The course is designed to provide students with an orientation to the trade and an opportunity to explore…

Investigation of charge coupled device correlation techniques

NASA Technical Reports Server (NTRS)

Lampe, D. R.; Lin, H. C.; Shutt, T. J.

1978-01-01

Analog Charge Transfer Devices (CTD's) offer unique advantages to signal processing systems, which often have large development costs, making it desirable to define those devices which can be developed for general system's use. Such devices are best identified and developed early to give system's designers some interchangeable subsystem blocks, not requiring additional individual development for each new signal processing system. The objective of this work is to describe a discrete analog signal processing device with a reasonably broad system use and to implement its design, fabrication, and testing.

Working Memory and Reasoning: The Processing Loads Imposed by Analogies.

ERIC Educational Resources Information Center

Halford, Graeme S.

The proposals concerning working memory outlined in this paper involve the architecture of working memory, the reasoning mechanisms that draw on it, and the ways in which working memory may develop with age. Ways of assessing task demands and children's working memory capacities are also considered. It is noted that there is long-standing evidence…

Development of Cross-Platform Software for Well Logging Data Visualization

NASA Astrophysics Data System (ADS)

Akhmadulin, R. K.; Miraev, A. I.

2017-07-01

Well logging data processing is one of the main sources of information in the oil-gas field analysis and is of great importance in the process of its development and operation. Therefore, it is important to have the software which would accurately and clearly provide the user with processed data in the form of well logs. In this work, there have been developed a software product which not only has the basic functionality for this task (loading data from .las files, well log curves display, etc.), but can be run in different operating systems and on different devices. In the article a subject field analysis and task formulation have been performed, and the software design stage has been considered. At the end of the work the resulting software product interface has been described.

Relationships among processing speed, working memory, and fluid intelligence in children.

PubMed

Fry, A F; Hale, S

2000-10-01

The present review focuses on three issues, (a) the time course of developmental increases in cognitive abilities; (b) the impact of age on individual differences in these abilities, and (c) the mechanisms by which developmental increases in different aspects of cognition affect each other. We conclude from our review of the literature that the development of processing speed, working memory, and fluid intelligence, all follow a similar time course, suggesting that all three abilities develop in concert. Furthermore, the strength of the correlation between speed and intelligence does not appear to change with age, and most of the effect of the age-related increase in speed on intelligence appears to be mediated through the effect of speed on working memory. Finally, most of the effect of the age-related improvement in working memory on intelligence is itself attributable to the effect of the increase in speed on working memory, providing evidence of a cognitive developmental cascade.

Development of a systems theoretical procedure for evaluation of the work organization of the cockpit crew of a civil transport airplane

NASA Technical Reports Server (NTRS)

Fricke, M.; Vees, C.

1983-01-01

To achieve optimum design for the man machine interface with aircraft, a description of the interaction and work organization of the cockpit crew is needed. The development of system procedure to evaluate the work organization of pilots while structuring the work process is examined. Statistical data are needed to simulate sequences of pilot actions on the computer. Investigations of computer simulation and applicability for evaluation of crew concepts are discussed.

The two-process theory of face processing: modifications based on two decades of data from infants and adults.

PubMed

Johnson, Mark H; Senju, Atsushi; Tomalski, Przemyslaw

2015-03-01

Johnson and Morton (1991. Biology and Cognitive Development: The Case of Face Recognition. Blackwell, Oxford) used Gabriel Horn's work on the filial imprinting model to inspire a two-process theory of the development of face processing in humans. In this paper we review evidence accrued over the past two decades from infants and adults, and from other primates, that informs this two-process model. While work with newborns and infants has been broadly consistent with predictions from the model, further refinements and questions have been raised. With regard to adults, we discuss more recent evidence on the extension of the model to eye contact detection, and to subcortical face processing, reviewing functional imaging and patient studies. We conclude with discussion of outstanding caveats and future directions of research in this field. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Design, Development and Hotfire Testing of Monolithic Copper and Bimetallic Additively Manufactured Combustion Chambers

NASA Technical Reports Server (NTRS)

Gradl, Paul; Barnett, Greg; Brandsmeier, Will; Greene, Sandy Elam; Protz, Chris

2016-01-01

NASA and industry partners are working towards fabrication process development to reduce costs and schedules associated with manufacturing liquid rocket engine components with the goal of reducing overall mission costs. One such technique being evaluated is powder-bed fusion or selective laser melting (SLM) otherwise commonly referred to as additive manufacturing. The NASA Low Cost Upper Stage Propulsion (LCUSP) program was designed to develop processes and material characterization for the GRCop-84 copper-alloy commensurate with powder bed additive manufacturing, evaluate bimetallic deposition and complete testing of a full scale combustion chamber. As part of this development, the process has been transferred to industry partners to enable a long-term supply chain of monolithic copper combustion chambers. As a direct spin off of this program, NASA is working with industry partners to further develop the printing process for the GRCop-84 material in addition to the C-18150 (CuCrZr) material. To advance the process further and allow for optimization with multiple materials, NASA is also investigating the feasibility of bimetallic additively manufactured chambers. A 1.2k sized thrust-chamber was designed and developed to compare the printing process of the GRCop-84 and C-18150 SLM materials. A series of similar MCC liners also completed development with an Inconel 625 jacket bonded to the GRcop-84 liner evaluating direct metal deposition (DMD) laser and arc-based techniques. This paper describes the design, development, manufacturing and testing of these combustion chambers and associated lessons learned throughout the design and development process.

Nancy Dowe | NREL

Science.gov Websites

Center Bioprocess Development Group. The group is largely made up of fermentation scientists and engineers whose focus is on fermentation process development and pilot plant scale-up. Dowe has nearly 30 years of experience working with a wide variety of fermentation processes and microorganisms for the

Project T.E.A.M. (Technical Education Advancement Modules). Introduction to Statistical Process Control.

ERIC Educational Resources Information Center

Billings, Paul H.

This instructional guide, one of a series developed by the Technical Education Advancement Modules (TEAM) project, is a 6-hour introductory module on statistical process control (SPC), designed to develop competencies in the following skill areas: (1) identification of the three classes of SPC use; (2) understanding a process and how it works; (3)…

Practice development: implementing a change of practice as a team.

PubMed

Covill, Carl; Hope, Angela

2012-08-01

Practice development (PD), as a framework for multiprofessional working, has immense potential, specifically within change management and the clinical governance agenda. It has been acknowledged as a vehicle for 'continuous improvement'. This article discusses PD through collaborative working using the example of a case study on change of practice in falls reduction within a localised community setting. The process is underpinned by a PD framework and facilitated by leaders of PD within a university setting. The article identifies that PD frameworks are conducive to developing leadership and management roles within a democratic process. The article discusses the potential for multiprofessional PD within the locality and further afield.

Perceptions of Breast Cancer Survivors on the Supporting Practices of Their Supervisors in the Return-to-Work Process: A Qualitative Descriptive Study.

PubMed

Caron, Maryse; Durand, Marie-José; Tremblay, Dominique

2018-03-01

Purpose Supervisors are known to be key actors in ensuring the success of absent employees in their return-to-work process. However, to date, little is known about the perceptions of breast cancer survivors on the practices put in place by their supervisors to support them during this process. The objective of this study was to describe the perceptions of breast cancer survivors on the practices put in place by their supervisors to support them during their return-to-work process. Method A qualitative descriptive study was conducted. Semi-structured interviews were carried out with breast cancer survivors (n = 10) who had returned to work after treatment and were still at work more than 18 months later. Each interview was audio recorded and then transcribed verbatim for qualitative thematic content analysis using a semi-open codification framework. Results Participants identified three main practices put in place by their supervisors to support them and which they perceived as particularly helpful during the return-to-work process: (1) maintaining communication during their period of absence; (2) working with them to structure their return-to-work process before their actual return; and (3) allowing them flexibility in their schedule for a certain period, particularly at the beginning of the return-to-work process. Breast cancer survivors also identified an omission in the practice of employers: lack of follow-up over time. Conclusion Knowledge about the practices perceived as helpful by breast cancer survivors during their return-to-work process lays the groundwork for the eventual development of services to help breast cancer survivors in their return to work.

Investigation of Friction Stir Welding and Laser Engineered Net Shaping of Metal Matrix Composite Materials

NASA Technical Reports Server (NTRS)

Diwan, Ravinder M.

2002-01-01

The improvement in weld quality by the friction stir welding (FSW) process invented by TWI of Cambridge, England, patented in 1991, has prompted investigation of this process for advanced structural materials including Al metal matrix composite (Al-MMC) materials. Such materials can have high specific stiffness and other potential beneficial properties for the extreme environments in space. Developments of discontinuous reinforced Al-MMCs have found potential space applications and the future for such applications is quite promising. The space industry has recognized advantages of the FSW process over conventional welding processes such as the absence of a melt zone, reduced distortion, elimination of the need for shielding gases, and ease of automation. The process has been well proven for aluminum alloys, and work is being carried out for ferrous materials, magnesium alloys and copper alloys. Development work in the FSW welding process for joining of Al-MMCs is relatively recent and some of this and related work can be found in referenced research publications. NASA engineers have undertaken to spear head this research development work for FSW process investigation of Al-MMCs. Some of the reported related work has pointed out the difficulty in fusion welding of particulate reinforced MMCs where liquid Al will react with SiC to precipitate aluminum carbide (Al4C3). Advantages of no such reaction and no need for joint preparation for the FSW process is anticipated in the welding of Al-MMCs. The FSW process has been best described as a combination of extrusion and forging of metals. This is carried out as the pin tool rotates and is slowly plunged into the bond line of the joint as the pin tool's shoulder is in intimate contact with the work piece. The material is friction-stirred into a quality weld. Al-MMCs, 4 in. x 12 in. plates of 0.25 in. (6.35mm) thickness, procured from MMCC, Inc. were butt welded using FSW process at Marshall Space Flight Center (MSFC) using prior set of operating conditions. Weld quality was evaluated using radiography and standard metallography techniques. Another aspect of the MMCs centered around the use of the laser engineered net shaping (LENS) processing of selected Narloy-Z composites. Such an approach has been earlier studied for fabrication of stainless steels. In the present study, attempts were made to fabricate straight cylindrical specimens using LENS process of Narloy-Z and Narloy-Z with 20 vol. % Al2O3 MMCs using the direct metal deposition Optomec LENS-750 system.

Relational interventions in psychotherapy: development of a therapy process rating scale.

PubMed

Ulberg, Randi; Ness, Elisabeth; Dahl, Hanne-Sofie Johnsen; Høglend, Per Andreas; Critchfield, Kenneth; Blayvas, Phelix; Amlo, Svein

2016-09-06

In psychodynamic psychotherapy, one of the therapists' techniques is to intervene on and encourage exploration of the patients' relationships with other people. The impact of these interventions and the response from the patient are probably dependent on certain characteristics of the context in which the interventions are given and the interventions themselves. To identify and analyze in-session effects of therapists' techniques, process scales are used. The aim of the present study was to develop a simple, not resource consuming rating tool for in-session process to be used when therapists' interventions focus on the patients' relationships outside therapy. The present study describes the development and use of a therapy process rating scale, the Relational Work Scale (RWS). The scale was constructed to identify, categorize and explore therapist interventions that focus on the patient's relationships to family, friends, and colleges Relational Interventions and explore the impact on the in-session process. RWS was developed with sub scales rating timing, content, and valence of the relational interventions, as well as response from the patient. For the inter-rater reliability analyzes, transcribed segments (10 min) from 20 different patients were scored with RWS by two independent raters. Two clinical vignettes of relational work are included in the paper as examples of how to rate transcripts from therapy sessions with RWS. The inter-rater agreement on the RWS items was good to excellent. Relational Work Scale might be a potentially useful tool to identify relational interventions as well as explore the interaction of timing, category, and valence of relational work in psychotherapies. The therapist's interventions on the patient's relationships with people outside therapy and the following patient-therapist interaction might be explored. First Experimental Study of Transference-interpretations (FEST307/95) REGISTRATION NUMBER: ClinicalTrials.gov Identifier: NCT00423462 .

Active monitoring as cognitive control of grinders design

NASA Astrophysics Data System (ADS)

Flizikowski, Jozef B.; Mrozinski, Adam; Tomporowski, Andrzej

2017-03-01

A general monitoring methodology applicable to plastics recyclates grinding processes development for energy engineering, has been presented in this work. The method includes two beings: mathematical aiding an invention and working of a novelty. The common set is composed of characteristics, structure, relationships of knowledge about states and transformations, effectiveness and progress of the devices and machinery engineering, e.g. breaking up in the energy-materials recycling process. This innovations theory is identified by the valuation, estimation, testing and creative archiving the elaborated character and structure of the invention and grinders construction development.

Productive Skills for Process Operatives. Skills Review.

ERIC Educational Resources Information Center

Giles, L.; Kodz, J.; Evans, C.

A study of process operatives examined the developments in processing work in 20 organizations within the chemical and food and drink processing industries. Seven exploratory interviews were followed by 20 employer interviews. Technological innovations caused job losses and layoffs. Organizational responses adopted to meet increasing competitive…

Behind Linus's Law: Investigating Peer Review Processes in Open Source

ERIC Educational Resources Information Center

Wang, Jing

2013-01-01

Open source software has revolutionized the way people develop software, organize collaborative work, and innovate. The numerous open source software systems that have been created and adopted over the past decade are influential and vital in all aspects of work and daily life. The understanding of open source software development can enhance its…

Emergent Bilingualism and Working Memory Development in School Aged Children

ERIC Educational Resources Information Center

Hansen, Laura Birke; Macizo, Pedro; Duñabeitia, Jon Andoni; Saldaña, David; Carreiras, Manuel; Fuentes, Luis J.; Bajo, M. Teresa

2016-01-01

The present research explores working memory (WM) development in monolingual as well as emergent bilingual children immersed in an L2 at school. Evidence from recent years suggests that bilingualism may boost domain-general executive control, but impair nonexecutive linguistic processing. Both are relevant for verbal WM, but different paradigms…

Leader Delegation and Trust in Global Software Teams

ERIC Educational Resources Information Center

Zhang, Suling

2008-01-01

Virtual teams are an important work structure in global software development. The distributed team structure enables access to a diverse set of expertise which is often not available in one location, to a cheaper labor force, and to a potentially accelerated development process that uses a twenty-four hour work structure. Many software teams…

Innovation in social policy: collaborative policy advocacy.

PubMed

Sherraden, Margaret S; Slosar, Betsy; Sherraden, Michael

2002-07-01

In a time of policy devolution, social workers have a unique opportunity to develop a significant voice in constructing state social welfare policy. This article examines a method of collaborative policy advocacy led by social work researchers, practitioners, advocates, and students. It is illustrated with a five-year project to reduce wealth inequality through community economic development. Researchers brought expertise in ideas and analysis to real-world applications. Social work practitioners brought essential "on the ground" expertise. Students brought much-needed assistance and a fresh perspective to the social policy process. Advocates, working in social welfare advocacy organizations, bridged these perspectives and provided experience in policy advocacy. Working with coalition partners, social workers successfully placed asset-based community economic development strategies on the state agenda and were instrumental in passage of innovative legislation. The article demonstrates that the policy-making process is open to influence by social workers, especially if they come prepared with innovative and promising ideas about long-standing social issues. Social workers can and should take the lead and become significant actors in state policy development.

Assessment of Work Performance (AWP)--development of an instrument.

PubMed

Sandqvist, Jan L; Törnquist, Kristina B; Henriksson, Chris M

2006-01-01

Adequate work assessments are a matter of importance both for individuals and society [5,29,31,38,40,46,52]. However, there is a lack of adequate and reliable instruments for use in work rehabilitation [14,15,20,21,31,44]. The purpose of this study was to develop and evaluate an observation instrument for assessing work performance, the AWP (Assessment of Work Performance). The purpose of the 14-item instrument is to assess the individual's observable working skills in three different areas: motor skills, process skills, and communication and interaction skills. This article describes the development and results of preliminary testing of the AWP. The testing indicates a satisfactory face validity and utility for the AWP and supports further research and testing of the instrument.

Women's Work along the Southwest Border: A Significant Aspect of Labor History. Working Paper No. 2.

ERIC Educational Resources Information Center

Jensen, Joan M.

Historically women have engaged in three types of work: non-wage (work in the household for family use), market work in the home (e.g., home sewing and the selling of home-processed and -cooked foods), and wage work. As the border states industrialized and developed economically, non-wage labor intensified, production at home for the market…

Experimental investigation on the development characteristics of initial electrons in a gas pressurized closing switch under DC voltage

NASA Astrophysics Data System (ADS)

Rongxiao, ZHAI; Mengtong, QIU; Weixi, LUO; Peitian, CONG; Tao, HUANG; Jiahui, YIN; Tianyang, ZHANG

2018-04-01

As one of the most important elements in linear transformer driver (LTD) based systems, the gas pressurized closing switches are required to operate with a very low prefire probability during the DC-charging process to ensure reliable operation and stable output of the whole pulsed power system. The most direct and effective way to control the prefire probability is to select a suitable working coefficient. The study of the development characteristics of the initially generated electrons is useful for optimizing the working coefficient and improving the prefire characteristic of the switches. In this paper an ultraviolet pulsed laser is used to generate initial electrons inside the gap volume. A current measuring system is used to measure the time-dependent current generated by the growth of the initial electrons so as to study the development characteristics of the electrons under different working coefficients. Experimental results show that the development characteristics of the initial electrons are influenced obviously by the working coefficient. With the increase of the working coefficient, the development degree of the electrons increases consequently. At the same times, there is a threshold of working coefficient which produces the effect of ionization on electrons. The range of the threshold has a slow growth but remains close to 65% with the gas pressure increase. When the working coefficient increases further, γ processes are starting to be generated inside the gap volume. In addition, an optimal working coefficient beneficial for improving the prefire characteristic is indicated and further tested.

PL-3, PHASE I, TASK 3, RESEARCH AND DEVELOPMENT REPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Humphries, G. E.

1962-03-12

Results of researeh and development tasks are presented along with recommendations for future development work Work (s reported ofn the areas of plant assembly and relocation, housings and footings, waste heat dissipation, instrumentation, refueling systems, waste disposal, shiceding, core nuclear thermal and hydraulic studies, gaseous waste processing, and critical experiments on a 5 x 5 array of Type 3 fuel elements. (auth)

"Without Stones There Is No Arch": A Study of Professional Development of Teacher Educators as a Team

ERIC Educational Resources Information Center

Barak, Judith; Gidron, Ariela; Turniansky, Bobbie

2010-01-01

In this work we study the meaning of professional development as a participative process within a community of practice. In this collaborative narrative self-study we look at the development of ourselves as a professional group working together in an intensive program. The study is based on personal career stories, each told by its author, but…

The advent of canine performance science: offering a sustainable future for working dogs.

PubMed

Cobb, Mia; Branson, Nick; McGreevy, Paul; Lill, Alan; Bennett, Pauleen

2015-01-01

Working and sporting dogs provide an essential contribution to many industries worldwide. The common development, maintenance and disposal of working and sporting dogs can be considered in the same way as other animal production systems. The process of 'production' involves genetic selection, puppy rearing, recruitment and assessment, training, housing and handling, handler education, health and working life end-point management. At present, inefficiencies throughout the production process result in a high failure rate of dogs attaining operational status. This level of wastage would be condemned in other animal production industries for economic reasons and has significant implications for dog welfare, as well as public perceptions of dog-based industries. Standards of acceptable animal use are changing and some historically common uses of animals are no longer publicly acceptable, especially where harm is caused for purposes deemed trivial, or where alternatives exist. Public scrutiny of animal use appears likely to increase and extend to all roles of animals, including working and sporting dogs. Production system processes therefore need to be transparent, traceable and ethically acceptable for animal use to be sustainable into the future. Evidence-based approaches already inform best practice in fields as diverse as agriculture and human athletic performance. This article introduces the nascent discipline of canine performance science, which aims to facilitate optimal product quality and production efficiency, while also assuring evidence-based increments in dog welfare through a process of research and development. Our thesis is that the model of canine performance science offers an objective, transparent and traceable opportunity for industry development in line with community expectations and underpins a sustainable future for working dogs. This article is part of a Special Issue entitled: Canine Behavior. Copyright © 2014 Elsevier B.V. All rights reserved.

The Design of Collaborative Learning for Teaching Physics in Vocational Secondary School

NASA Astrophysics Data System (ADS)

Ismayati, Euis

2018-04-01

Vocational secondary school (Sekolah Menengah Kejuruan or SMK) is a vocational education that is based on the principle of human resource investment (human capital investment) referring to the quality of education and productivity to compete in the global job market. Therefore, vocational education relates directly to business world/industry which fulfills the needs of the skilled worker. According to the results of some researches, the work ethics of vocational graduates are still unsatisfying. Most of them are less able to perform their works, to adapt to the changes and development of technology and science, to be retrained, to develop themselves, to collaborate, and to argue. Meanwhile, the employers in the world of work and industries require their employees to have abilities to think creatively and working collaboratively. In addition, the students’ abilities to adapt to the technology in working environment are greatly influenced by the learning process in their schools, especially in science learning. The process of science learning which can help the students to think and act scientifically should be implemented by teachers using a learning approach which is appropriate to the students’ need and the material taught to the students. To master technology and industry needs science mastery. Physics, as a part of science, has an important role in the development of technology since the products of technology strongly support further development of science. In order to develop the abilities to think critically and working collaboratively, education should be given to the students through the learning process using learning model which refers to a collaborative group discussion system called Collaborative Learning. Moreover, Collaborative learning for teaching Physics in vocational secondary school should be designed in such a way that the goal of teaching and learning can be achieved. Collaborative Learning is advantageous to improve the students’ creative thinking and collaborative working.

Identification of Threshold Concepts for Biochemistry

PubMed Central

Green, David; Lewis, Jennifer E.; Lin, Sara; Minderhout, Vicky

2014-01-01

Threshold concepts (TCs) are concepts that, when mastered, represent a transformed understanding of a discipline without which the learner cannot progress. We have undertaken a process involving more than 75 faculty members and 50 undergraduate students to identify a working list of TCs for biochemistry. The process of identifying TCs for biochemistry was modeled on extensive work related to TCs across a range of disciplines and included faculty workshops and student interviews. Using an iterative process, we prioritized five concepts on which to focus future development of instructional materials. Broadly defined, the concepts are steady state, biochemical pathway dynamics and regulation, the physical basis of interactions, thermodynamics of macromolecular structure formation, and free energy. The working list presented here is not intended to be exhaustive, but rather is meant to identify a subset of TCs for biochemistry for which instructional and assessment tools for undergraduate biochemistry will be developed. PMID:25185234

Constant negotiating: managing work-related musculoskeletal disorders while remaining at the workplace.

PubMed

Smith-Young, Joanne; Solberg, Shirley; Gaudine, Alice

2014-02-01

We used grounded theory to explore processes and strategies used by workers affected by work-related musculoskeletal disorders (WMSDs) while they remained in the workplace, and we developed a theory to describe the overall process. Participants included 25 workers affected by WMSDs who were currently employed in various workplaces in Newfoundland and Labrador, Canada. The theoretical model has five main phases: (a) becoming concerned, (b) getting medical help, (c) dealing with the workplace, (d) making adjustments to lifestyle, and (e) taking charge, each with separate subphases. Constant negotiating was the core variable that explained the overall process, with workers engaged in negotiations with others in occupational, health, and social contexts. Using a two-dimensional figure, we illustrate the negotiation strategies workers used. We discuss implications for health care, workplaces, education, and research for creating a culture of understanding and respect for injured workers who wish to remain working after developing WMSDs.

Open Learning for Process Operators. ZIFF Papiere 78.

ERIC Educational Resources Information Center

Geary, David

This document describes the development and implementation of an open learning course for shift operators who work in British process industries. The course was developed collaboratively during 1979-82 by B.P. Chemicals Ltd. and Grimsby College of Technology and Arts, using the Business and Technician Education Council certification program.…

Academic Excellence/Economic Development Working Group Progress Report to the Board

ERIC Educational Resources Information Center

Oregon University System, 2004

2004-01-01

A knowledge economy produces new knowledge; transforms knowledge into innovative products, processes, and services; moves innovations into the marketplace; and ultimately, develops new markets. It is global in perspective, collaborative in process, and dynamic in its responsiveness to changing conditions. Most important, it is fed by a healthy…

Developing and Modeling Complex Social Interventions: Introducing the Connecting People Intervention

ERIC Educational Resources Information Center

Webber, Martin; Reidy, Hannah; Ansari, David; Stevens, Martin; Morris, David

2016-01-01

Objectives: Modeling the processes involved in complex social interventions is important in social work practice, as it facilitates their implementation and translation into different contexts. This article reports the process of developing and modeling the connecting people intervention (CPI), a model of practice that supports people with mental…

Relation between Working Memory Capacity and Auditory Stream Segregation in Children with Auditory Processing Disorder.

PubMed

Lotfi, Yones; Mehrkian, Saiedeh; Moossavi, Abdollah; Zadeh, Soghrat Faghih; Sadjedi, Hamed

2016-03-01

This study assessed the relationship between working memory capacity and auditory stream segregation by using the concurrent minimum audible angle in children with a diagnosed auditory processing disorder (APD). The participants in this cross-sectional, comparative study were 20 typically developing children and 15 children with a diagnosed APD (age, 9-11 years) according to the subtests of multiple-processing auditory assessment. Auditory stream segregation was investigated using the concurrent minimum audible angle. Working memory capacity was evaluated using the non-word repetition and forward and backward digit span tasks. Nonparametric statistics were utilized to compare the between-group differences. The Pearson correlation was employed to measure the degree of association between working memory capacity and the localization tests between the 2 groups. The group with APD had significantly lower scores than did the typically developing subjects in auditory stream segregation and working memory capacity. There were significant negative correlations between working memory capacity and the concurrent minimum audible angle in the most frontal reference location (0° azimuth) and lower negative correlations in the most lateral reference location (60° azimuth) in the children with APD. The study revealed a relationship between working memory capacity and auditory stream segregation in children with APD. The research suggests that lower working memory capacity in children with APD may be the possible cause of the inability to segregate and group incoming information.

New Developments in Wildfire Pollution Forecasting at the Canadian Meteorological Centre

NASA Astrophysics Data System (ADS)

Pavlovic, Radenko; Chen, Jack; Munoz-Alpizar, Rodrigo; Davignon, Didier; Beaulieu, Paul-Andre; Landry, Hugo; Menard, Sylvain; Gravel, Sylvie; Moran, Michael

2017-04-01

Environment and Climate Change Canada's air quality forecast system with near-real-time wildfire emissions, named FireWork, was developed in 2012 and has been run by the Canadian Meteorological Centre Operations division (CMCO) since 2013. In June 2016 this system was upgraded to operational status and wildfire smoke forecasts for North America are now available to the general public. FireWork's ability to model the transport and diffusion of wildfire smoke plumes has proved to be valuable to regional air quality forecasters and emergency first responders. Some of the most challenging issues with wildfire pollution modelling concern the production of wildfire emission estimates and near-source dispersion within the air quality model. As a consequence, FireWork is undergoing constant development. During the massive Fort McMurray wildfire event in western Canada in May 2016, for example, different wildfire emissions processing approaches and wildfire emissions injection and dispersion schemes were tested within the air quality model. Work on various FireWork components will continue in order to deliver a new operational version of the forecasting system for the 2017 wildfire season. Some of the proposed improvements will be shown in this presentation along with current and planned FireWork post-processing products.

Low cost solar array project: Experimental process system development unit for producing semiconductor-grade silicon using the silane-to-silicon process

NASA Technical Reports Server (NTRS)

1981-01-01

The results of the free space reactor experimental work are summarized. Overall, the objectives were achieved and the unit can be confidently scaled to the EPSDU size based on the experimental work and supporting theoretical analyses. The piping and instrumentation of the fluidized bed reactor was completed.

Novel Directional Solidification Processing of Hypermonotectic Alloys

NASA Technical Reports Server (NTRS)

Grugel, Richard N.

1999-01-01

Gravity driven separation precludes uniform microstructural development during controlled directional solidification (DS) processing of hypermonotectic alloys. It is well established that liquid/liquid suspensions, in which the respective components are immiscible and have significant density differences, can be established and maintained by utilizing ultrasound. A historical introduction to this work is presented with the intent of establishing the basis for applying the phenomena to promote microstructural uniformity during controlled directional solidification processing of immiscible mixtures. Experimental work based on transparent organics, as well as salt systems, will be presented in view of the processing parameters.

Time-based analysis of total cost of patient episodes: a case study of hip replacement.

PubMed

Peltokorpi, Antti; Kujala, Jaakko

2006-01-01

Healthcare in the public and private sectors is facing increasing pressure to become more cost-effective. Time-based competition and work-in-progress have been used successfully to measure and improve the efficiency of industrial manufacturing. Seeks to address this issue. Presents a framework for time based management of the total cost of a patient episode and apply it to the six sigma DMAIC-process development approach. The framework is used to analyse hip replacement patient episodes in Päijät-Häme Hospital District in Finland, which has a catchment area of 210,000 inhabitants and performs an average of 230 hip replacements per year. The work-in-progress concept is applicable to healthcare--notably that the DMAIC-process development approach can be used to analyse the total cost of patient episodes. Concludes that a framework, which combines the patient-in-process and the DMAIC development approach, can be used not only to analyse the total cost of patient episode but also to improve patient process efficiency. Presents a framework that combines patient-in-process and DMAIC-process development approaches, which can be used to analyse the total cost of a patient episode in order to improve patient process efficiency.

An implementation of a security infrastructure compliant with the Italian Personal Data Protection Code in a web-based cooperative work system.

PubMed

Eccher, Claudio; Eccher, Lorenzo; Izzo, Umberto

2005-01-01

In this poster we describe the security solutions implemented in a web-based cooperative work frame-work for managing heart failure patients among different health care professionals involved in the care process. The solution, developed in close collaboration with the Law Department of the University of Trento, is compliant with the new Italian Personal Data Protection Code, issued in 2003, that regulates also the storing and processing of health data.

Learning at work: competence development or competence-stress.

PubMed

Paulsson, Katarina; Ivergård, Toni; Hunt, Brian

2005-03-01

Changes in work and the ways in which it is carried out bring a need for upgrading workplace knowledge, skills and competencies. In today's workplaces, and for a number of reasons, workloads are higher than ever and stress is a growing concern (Health Risk Soc. 2(2) (2000) 173; Educat. Psychol. Meas. 61(5) (2001) 866). Increased demand for learning brings a risk that this will be an additional stress factor and thus a risk to health. Our research study is based on the control-demand-support model of Karasek and Theorell (Health Work: Stress, Productivity and the Reconstruction of Working Life, Basic Books/Harper, New York, 1990). We have used this model for our own empirical research with the aim to evaluate the model in the modern workplace. Our research enables us to expand the model in the light of current workplace conditions-especially those relating to learning. We report empirical data from a questionnaire survey of working conditions in two different branches of industry. We are able to define differences between companies in terms of working conditions and competence development. We describe and discuss the effects these conditions have on workplace competence development. Our research results show that increased workers' control of the learning process makes competence development more stimulating, is likely to simplify the work and reduces (learning-related) stress. It is therefore important that learning at work allows employees to control their learning and also allows time for the process of learning and reflection.

Center Planning and Development Student Engineer

NASA Technical Reports Server (NTRS)

Jenkins, Kenneth T.

2013-01-01

This fall I was the Student Trainee (Engineering) Pathways Intern (co-op) at the Kennedy Space Center (KSC) in the Center Planning Development (CPD) Directorate. CPD works with commercial companies who are interested using KSCs unique capabilities in spaceflight, spacecraft processing, ground systems and Research Development (RD) projects that fall in line with NASAs mission and goals. CPD is divided into four (4) groups: (1) AD-A, which works on the Master Planning for center, (2) AD-B (where I am), which works on project management and integration, (3) AD-C, which works on partnership development, and (4) AD-T, which works on the RD aspects of partnerships. CPDs main goal is to one day make KSC the worlds largest spaceport and maintain the center as a leader in space exploration. CPD is a very diverse group with employees having a wide knowledge of not only the Space Shuttle, but also that of the Apollo era. Our director of CPD, Scott Colloredo, is on the advisory board for Commercial Space Operations (CSO) and has a degree at ERAU. I worked on a number of different tasks for AD-B, as well as CPD, that includes, but not limited to: reviewing and reissuing engineering drawings from the Apollo and Shuttle eras, to supporting NASA rocket launches (MAVEN), and working on actual agreementsproposals that will be used in the partnership process with multiple partners. Most of the work I have done is sensitive information and cannot be disclosed.

PCM-SABRE: a platform for benchmarking and comparing outcome prediction methods in precision cancer medicine.

PubMed

Eyal-Altman, Noah; Last, Mark; Rubin, Eitan

2017-01-17

Numerous publications attempt to predict cancer survival outcome from gene expression data using machine-learning methods. A direct comparison of these works is challenging for the following reasons: (1) inconsistent measures used to evaluate the performance of different models, and (2) incomplete specification of critical stages in the process of knowledge discovery. There is a need for a platform that would allow researchers to replicate previous works and to test the impact of changes in the knowledge discovery process on the accuracy of the induced models. We developed the PCM-SABRE platform, which supports the entire knowledge discovery process for cancer outcome analysis. PCM-SABRE was developed using KNIME. By using PCM-SABRE to reproduce the results of previously published works on breast cancer survival, we define a baseline for evaluating future attempts to predict cancer outcome with machine learning. We used PCM-SABRE to replicate previous work that describe predictive models of breast cancer recurrence, and tested the performance of all possible combinations of feature selection methods and data mining algorithms that was used in either of the works. We reconstructed the work of Chou et al. observing similar trends - superior performance of Probabilistic Neural Network (PNN) and logistic regression (LR) algorithms and inconclusive impact of feature pre-selection with the decision tree algorithm on subsequent analysis. PCM-SABRE is a software tool that provides an intuitive environment for rapid development of predictive models in cancer precision medicine.

RATES OF REACTION AND PROCESS DESIGN DATA FOR THE HYDROCARB PROCESS

EPA Science Inventory

The report provides experimental and process design data in support of studies for developing the coprocessing of fossil fuels with biomass by the Hydrocarb process. The experimental work includes the hydropyrolysis of biomass and the thermal decomposition of methane in a 2.44 m ...

Working and Learning in a Field Excursion.

PubMed

Hole, Torstein Nielsen

2018-06-01

This study aimed to discern sociocultural processes through which students learn in field excursions. To achieve this aim, short-term ethnographic techniques were employed to examine how undergraduate students work and enact knowledge (or knowing) during a specific field excursion in biology. The students participated in a working practice that employed research methods and came to engage with various biological phenomena over the course of their work. A three-level analysis of the students' experiences focused on three processes that emerged: participatory appropriation, guided participation, and apprenticeship. These processes derive from advances in practice-oriented theories of knowing. Through their work in the field, the students were able to enact science autonomously; they engaged with peers and teachers in specific ways and developed new understandings about research and epistemology founded on their experiences in the field. Further discussion about the use of "practice" and "work" as analytical concepts in science education is also included.

Theorising Changes in Teachers' Work

ERIC Educational Resources Information Center

Hall, Christine

2004-01-01

This article discusses recurrent themes in the literature about teaching in developed countries: the intensification of work, increased central control, diminished professional autonomy, and fears about the deskilling of teachers. Labour Process theory is used to consider how we might understand the ways in which teachers' work and professionalism…

Updating Working Memory and Arithmetical Attainment in School

ERIC Educational Resources Information Center

Iuculano, Teresa; Moro, Raffaella; Butterworth, Brian

2011-01-01

Here we wished to determine how the sub-components of Working Memory (Phonological-Loop and Central Executive) influence children's arithmetical development. Specifically, we aimed at distinguishing between Working Memory inhibition and updating processes within the Central Executive, and the domain-specificity (words and numbers) of both…

Development of an ADP Training Program to Serve the EPA Data Processing Community.

DTIC Science & Technology

1976-07-29

divide, compute , perform and alter statements; data representation and conversion; table processing; and indexed sequential and random access file...processing. The course workshop will include the testing of coded exercises and problems on a computer system. CLASS SIZE: Individualized METHODS/CONDUCT...familiarization with computer concepts will be helpful. OBJECTIVES OF CURRICULUM After completing this course, the student should have developed a working

The role of collaborative ontology development in the knowledge negotiation process

NASA Astrophysics Data System (ADS)

Rivera, Norma

Interdisciplinary research (IDR) collaboration can be defined as the process of integrating experts' knowledge, perspectives, and resources to advance scientific discovery. The flourishing of more complex research problems, together with the growth of scientific and technical knowledge has resulted in the need for researchers from diverse fields to provide different expertise and points of view to tackle these problems. These collaborations, however, introduce a new set of "culture" barriers as participating experts are trained to communicate in discipline-specific languages, theories, and research practices. We propose that building a common knowledge base for research using ontology development techniques can provide a starting point for interdisciplinary knowledge exchange, negotiation, and integration. The goal of this work is to extend ontology development techniques to support the knowledge negotiation process in IDR groups. Towards this goal, this work presents a methodology that extends previous work in collaborative ontology development and integrates learning strategies and tools to enhance interdisciplinary research practices. We evaluate the effectiveness of applying such methodology in three different scenarios that cover educational and research settings. The results of this evaluation confirm that integrating learning strategies can, in fact, be advantageous to overall collaborative practices in IDR groups.

Motion Planning in a Society of Intelligent Mobile Agents

NASA Technical Reports Server (NTRS)

Esterline, Albert C.; Shafto, Michael (Technical Monitor)

2002-01-01

The majority of the work on this grant involved formal modeling of human-computer integration. We conceptualize computer resources as a multiagent system so that these resources and human collaborators may be modeled uniformly. In previous work we had used modal for this uniform modeling, and we had developed a process-algebraic agent abstraction. In this work, we applied this abstraction (using CSP) in uniformly modeling agents and users, which allowed us to use tools for investigating CSP models. This work revealed the power of, process-algebraic handshakes in modeling face-to-face conversation. We also investigated specifications of human-computer systems in the style of algebraic specification. This involved specifying the common knowledge required for coordination and process-algebraic patterns of communication actions intended to establish the common knowledge. We investigated the conditions for agents endowed with perception to gain common knowledge and implemented a prototype neural-network system that allows agents to detect when such conditions hold. The literature on multiagent systems conceptualizes communication actions as speech acts. We implemented a prototype system that infers the deontic effects (obligations, permissions, prohibitions) of speech acts and detects violations of these effects. A prototype distributed system was developed that allows users to collaborate in moving proxy agents; it was designed to exploit handshakes and common knowledge Finally. in work carried over from a previous NASA ARC grant, about fifteen undergraduates developed and presented projects on multiagent motion planning.

[Recovering helpers in the addiction treatment system in Hungary: an interpretative phenomenological analysis].

PubMed

Kassai, Szilvia; Pintér, Judit Nóra; Rácz, József

2015-01-01

The work of recovering helpers who work in the addiction rehabilitation centres was studied. The aim was to investigate the process of addicts becoming recovering helpers, and to study what peer help means to them. According to interpretative phenomenological analysis (IPA) design, subjects were selected, data were collected and analysed. 6 (5 males, 1 female), working as recovering helpers at least one year at addiction rehabilitation centres. Semi-structured life interviews were carried out and analysed according to IPA. Emerging themes from the interviews were identified and summarized, then interpreted as central themes: important periods and turning points of the life story interviews: the experience of psychoactive drugs use, the development of the addiction (which became " Turning Point No 1") then the "rock bottom" experience ("Turning Point No 2"). Then the experience of the helping process was examined: here four major themes were identified: the development of the recovering self and the helping self, the wounded helper and the skilled helper, the experience of the helping process. IPA was found to be a useful method for idiographic exploration of the development and the work of the recovering helpers. The work of the recovering helpers can be described as mentoring of the addict clients. Our experiences might be used for the training programs for recovering helpers as well as to adopt their professional role in addiction services.

Work Process in Primary Health Care: action research with Community Health Workers.

PubMed

Cordeiro, Luciana; Soares, Cassia Baldini

2015-11-01

The aim of this article was to describe and analyze the work of community health workers (CHW). The main objective of study was to analyze the development process of primary health care practices related to drug consumption. The study is based on the Marxist theoretical orientation and the action research methodology, which resulted in the performance of 15 emancipatory workshops. The category work process spawned the content analysis. It exposed the social abandonment of the environment in which the CHWs work is performed. The latter had an essential impact on the identification of the causes of drug-related problems. These findings made it possible to criticize the reiterative, stressful actions that are being undertaken there. Such an act resulted in raising of the awareness and creating the means for political action. The CHWs motivated themselves to recognize the object of the work process in primary health care, which they found to be the disease or addiction in the case of drug users. They have criticized this categorization as well as discussed the social division of work and the work itself whilst recognizing themselves as mere instruments in the work process. The latter has inspired the CHW to become subjects, or co-producers of transformations of social needs.

[Construction of the work process of the Family Health Support Nucleus: the experience of pharmacists in a city in the south of Brazil].

PubMed

Nakamura, Carina Akemi; Leite, Silvana Nair

2016-05-01

The Family Health Support Nucleus (NASF) was created in 2008 with the objective of broadening the range and scope of primary healthcare. The insertion of pharmacists in this multi-professional context represents an opportunity to enhance the working process and the rational access and use of medicines. The working processes of pharmacists in a city NASF was investigated. Field research was conducted using a qualitative approach with participant observation and semi-structured interviews. Two analytic dialectic categories emerged. The first was the pharmacists' dilemma in the construction of their working process as promoters of primary healthcare, while at the same time facing the need to deal with managerial functions mostly to cater to operational demand. The second was the reality experienced with guidelines and coordination of their work, where pharmacists can be free to structure their work as supporters, although at the same time it limits them due to lack of acknowledgment of their previously established working process. The lack of planning and a clear objective for work in the NASF, besides the deficiency of pharmaceutical services in primary healthcare make the development of any type of pharmacist activity important and essential even if it does not fully attend the NASF proposal.

Serologic test systems development. Progress report, July 1, 1976--September 30, 1977

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saunders, G.C.; Clinard, E.H.; Bartlett, M.L.

1978-01-01

Work has continued on the development and application of the Enzyme-Labeled Antibody (ELA) test to the USDA needs. Results on trichinosis, brucellosis, and staphylococcal enterotoxin A detection are very encouraging. A field test for trichinosis detection is being worked out in cooperation with Food Safety and Quality Service personnel. Work is in progress with the Technicon Instrument Corporation to develop a modification of their equipment to automatically process samples by the ELA procedure. An automated ELA readout instrument for 96-well trays has been completed and is being checked out.

Friction Stir Welding Development at NASA, Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

McGill, Preston; Gentz, Steve (Technical Monitor)

2001-01-01

Friction stir welding (FSW) is a solid state process that pan be used to join materials without melting. The process was invented by The Welding Institute (TWI), Cambridge, England. Friction stir welding exhibits several advantages over fusion welding in that it produces welds with fewer defects and higher joint efficiency and is capable of joining alloys that are generally considered non-weldable with a fusion weld process. In 1994, NASA-Marshall began collaborating with TWI to transform FSW from a laboratory curiosity to a viable metal joining process suitable for manufacturing hardware. While teamed with TWI, NASA-Marshall began its own FSW research and development effort to investigate possible aerospace applications for the FSW process. The work involved nearly all aspects of FSW development, including process modeling, scale-up issues, applications to advanced materials and development of tooling to use FSW on components of the Space Shuttle with particular emphasis on aluminum tanks. The friction stir welding process involves spinning a pin-tool at an appropriate speed, plunging it into the base metal pieces to be joined, and then translating it along the joint of the work pieces. In aluminum alloys the rotating speed typically ranges from 200 to 400 revolutions per minute and the translation speed is approximately two to five inches per minute. The pin-tool is inserted at a small lead angle from the axis normal to the work piece and requires significant loading along the axis of the tool. An anvil or reaction structure is required behind the welded material to react the load along the axis of the pin tool. The process requires no external heat input, filler material, protective shielding gas or inert atmosphere typical of fusion weld processes. The FSW solid-state weld process has resulted in aluminum welds with significantly higher strengths, higher joint efficiencies and fewer defects than fusion welds used to join similar alloys.

Working capital management in the process of financial support of investment and construction projects and of the construction material industry

NASA Astrophysics Data System (ADS)

Danilochkina, Nadezhda; Lukmanova, Inessa; Roshchina, Olga; Voytolovskiy, Nikolay

2018-03-01

The article presents the analysis of working capital in the process of financial support of high-rise construction investment projects. The factors influencing the choice of the working capital management model were analyzed, the reasons of the change in the requirement for the values of current assets in the process of construction of high-rise facilities were determined. The author has developed the scheme of interrelation between production, operational and financial activity cycles of enterprises implementing investment projects of unique buildings and structures and made a comparative description of their financing sources.

Improving the work function of the niobium surface of SRF cavities by plasma processing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tyagi, P. V.; Doleans, M.; Hannah, B.

2016-01-01

An in situ plasma processing technique using chemically reactive oxygen plasma to remove hydrocarbons from superconducting radio frequency cavity surfaces at room temperature was developed at the spallation neutron source, at Oak Ridge National Laboratory. To understand better the interaction between the plasma and niobium surface, surface studies on small samples were performed. In this article, we report the results from those surface studies. The results show that plasma processing removes hydrocarbons from top surface and improves the surface work function by 0.5₋1.0 eV. Improving the work function of RF surface of cavities can help to improve their operational performance.

Development and evaluation of a "working together" framework and a tool kit to enhance inter-organizational relationships in healthcare.

PubMed

Edwards, Lynn; Gibson, Rick; Carson, Shannon Ryan; Sampalli, Tara

2013-01-01

Healthcare is in a constant state of change and evolution driven by a multitude of complex factors and interactions. Consequently, organizations, teams and individuals in healthcare have to habitually realign their working relationships. Furthermore, research has shown that "working together" relationships fail in the absence of a defined framework. In this research, a novel framework and a tool kit for working together have been developed and evaluated. The framework has a formal process to articulate the intended purpose/outcome, clearly align the type of working relationship with the purpose and identify the barriers and facilitators to working relationships in healthcare.

Automatic welding systems for large ship hulls

NASA Astrophysics Data System (ADS)

Arregi, B.; Granados, S.; Hascoet, JY.; Hamilton, K.; Alonso, M.; Ares, E.

2012-04-01

Welding processes represents about 40% of the total production time in shipbuilding. Although most of the indoor welding work is automated, outdoor operations still require the involvement of numerous operators. To automate hull welding operations is a priority in large shipyards. The objective of the present work is to develop a comprehensive welding system capable of working with several welding layers in an automated way. There are several difficulties for the seam tracking automation of the welding process. The proposed solution is the development of a welding machine capable of moving autonomously along the welding seam, controlling both the position of the torch and the welding parameters to adjust the thickness of the weld bead to the actual gap between the hull plates.

Scale Up of Malonic Acid Fermentation Process: Cooperative Research and Development Final Report, CRADA Number CRD-16-612

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schell, Daniel J

The goal of this work is to use the large fermentation vessels in the National Renewable Energy Laboratory's (NREL) Integrated Biorefinery Research Facility (IBRF) to scale-up Lygos' biological-based process for producing malonic acid and to generate performance data. Initially, work at the 1 L scale validated successful transfer of Lygos' fermentation protocols to NREL using a glucose substrate. Outside of the scope of the CRADA with NREL, Lygos tested their process on lignocellulosic sugars produced by NREL at Lawrence Berkeley National Laboratory's (LBNL) Advanced Biofuels Process Development Unit (ABPDU). NREL produced these cellulosic sugar solutions from corn stover using amore » separate cellulose/hemicellulose process configuration. Finally, NREL performed fermentations using glucose in large fermentors (1,500- and 9,000-L vessels) to intermediate product and to demonstrate successful performance of Lygos' technology at larger scales.« less

Usability engineering: domain analysis activities for augmented-reality systems

NASA Astrophysics Data System (ADS)

Gabbard, Joseph; Swan, J. E., II; Hix, Deborah; Lanzagorta, Marco O.; Livingston, Mark; Brown, Dennis B.; Julier, Simon J.

2002-05-01

This paper discusses our usability engineering process for the Battlefield Augmented Reality System (BARS). Usability engineering is a structured, iterative, stepwise development process. Like the related disciplines of software and systems engineering, usability engineering is a combination of management principals and techniques, formal and semi- formal evaluation techniques, and computerized tools. BARS is an outdoor augmented reality system that displays heads- up battlefield intelligence information to a dismounted warrior. The paper discusses our general usability engineering process. We originally developed the process in the context of virtual reality applications, but in this work we are adapting the procedures to an augmented reality system. The focus of this paper is our work on domain analysis, the first activity of the usability engineering process. We describe our plans for and our progress to date on our domain analysis for BARS. We give results in terms of a specific urban battlefield use case we have designed.

A national collaboration process: Finnish engineering education for the benefit of people and environment.

PubMed

Takala, A; Korhonen-Yrjänheikki, K

2013-12-01

The key stakeholders of the Finnish engineering education collaborated during 2006-09 to reform the system of education, to face the challenges of the changing business environment and to create a national strategy for the Finnish engineering education. The work process was carried out using participatory work methods. Impacts of sustainable development (SD) on engineering education were analysed in one of the subprojects. In addition to participatory workshops, the core part of the work on SD consisted of a research with more than 60 interviews and an extensive literature survey. This paper discusses the results of the research and the work process of the Collaboration Group in the subproject of SD. It is suggested that enhancing systematic dialogue among key stakeholders using participatory work methods is crucial in increasing motivation and commitment in incorporating SD in engineering education. Development of the context of learning is essential for improving skills of engineering graduates in some of the key abilities related to SD: systemic- and life-cycle thinking, ethical understanding, collaborative learning and critical reflection skills. This requires changing of the educational paradigm from teacher-centred to learner-centred applying problem- and project-oriented active learning methods.

The undergraduate research fellows program: a unique model to promote engagement in research.

PubMed

Vessey, Judith A; DeMarco, Rosanna F

2008-01-01

Well-educated nurses with research expertise are needed to advance evidence-based nursing practice. A primary goal of undergraduate nursing curricula is to create meaningful participatory experiences to help students develop a research skill set that articulates with rapid career advancement of gifted, young graduates interested in nursing research and faculty careers. Three research enrichment models-undergraduate honors programs, research assistant work-for-hire programs, and research work/mentorship programs-to be in conjunction with standard research content are reviewed. The development and implementation of one research work/mentorship program, the Boston College undergraduate research fellows program (UGRF), is explicated. This process included surveying previous UGRFs followed by creating a retreat and seminars to address specific research skill sets. The research skill sets included (a) how to develop a research team, (b) accurate data retrieval, (c) ethical considerations, (d) the research process, (e) data management, (f) successful writing of abstracts, and (g) creating effective poster presentations. Outcomes include evidence of involvement in research productivity and valuing of evidenced-based practice through the UGRF mentorship process with faculty partners.

Composite Properties of Polyimide Resins Made From "Salt-Like" Solution Precursors

NASA Technical Reports Server (NTRS)

Cano, Roberto J.; Weiser, Erik S.; SaintClair, Terry L.; Echigo, Yoshiaki; Kaneshiro, Hisayasu

1997-01-01

Recent work in high temperature materials at NASA Langley Research Center (LaRC (trademark)) have led to the development of new polyimide resin systems with very attractive properties. The majority of the work done with these resin systems has concentrated on determining engineering mechanical properties of composites prepared from a poly(amide acid) precursor. Three NASA Langley-developed polyimide matrix resins, LaRC (trademark) -IA, LaRC (trademark) -IAX, and LaRC (trademark) -8515, were produced via a salt-like process developed by Unitika Ltd. The 'salt-like' solutions (sixty-five percent solids in NMP) were prepregged onto Hexcel IM7 carbon fiber using the NASA LaRC Multipurpose Tape Machine. Process parameters were determined and composite panels fabricated. Mechanical properties are presented for these three intermediate modulus carbon fiber/polyimide matrix composites and compared to existing data on the same polyimide resin systems and IM7 carbon fiber manufactured via poly(amide acid) solutions (thirty-five percent solids in NMP). This work studies the effects of varying the synthetic route on the processing and mechanical properties of polyimide composites.

Progress in development of coated indexable cemented carbide inserts for machining of iron based work piece materials

NASA Astrophysics Data System (ADS)

Czettl, C.; Pohler, M.

2016-03-01

Increasing demands on material properties of iron based work piece materials, e.g. for the turbine industry, complicate the machining process and reduce the lifetime of the cutting tools. Therefore, improved tool solutions, adapted to the requirements of the desired application have to be developed. Especially, the interplay of macro- and micro geometry, substrate material, coating and post treatment processes is crucial for the durability of modern high performance tool solutions. Improved and novel analytical methods allow a detailed understanding of material properties responsible for the wear behaviour of the tools. Those support the knowledge based development of tailored cutting materials for selected applications. One important factor for such a solution is the proper choice of coating material, which can be synthesized by physical or chemical vapor deposition techniques. Within this work an overview of state-of-the-art coated carbide grades is presented and application examples are shown to demonstrate their high efficiency. Machining processes for a material range from cast iron, low carbon steels to high alloyed steels are covered.

Work zone performance monitoring application development.

DOT National Transportation Integrated Search

2016-10-01

The Federal Highway Administration (FHWA) requires state transportation agencies to (a) collect and analyze safety and mobility data to manage the work zone impacts of individual projects during construction and (b) improve overall agency processes a...

What Can the Work of Habermas Offer Educational Researcher Development Programmes?

ERIC Educational Resources Information Center

Garland, Paul

2014-01-01

Although certain aspects of the work of Habermas have had much influence on emancipatory and action research, this article draws on a wider range of his thinking in order to explore how his ideas can inform the content and process of educational researcher development programmes. Habermas's theory of communicative action, his discourse ethics…

Individual Differences in the Development of Early Writing Skills: Testing the Unique Contribution of Visuo-Spatial Working Memory

ERIC Educational Resources Information Center

Bourke, Lorna; Davies, Simon J.; Sumner, Emma; Green, Carolyn

2014-01-01

Visually mediated processes including, exposure to print (e.g. reading) as well as orthographic transcription and coding skills, have been found to contribute to individual differences in literacy development. The current study examined the role of visuospatial working memory (WM) in underpinning this relationship and emergent writing. One hundred…

Professional Development School Triads Inquiring about Student Work in Elementary Mathematics

ERIC Educational Resources Information Center

Coon-Kitt, Mary Jayne; Nolan, James F.; Lloyd, Gwendolyn M.; Romig, Gail

2015-01-01

This article reports on a case of cross-role triads (mentor, intern, and supervisor) in a professional development school (PDS) setting engaged in the process of looking at student work in elementary mathematics over time. The study represents a significant effort to understand what inquiry-oriented behavior looks like in this context. By…

School Innovation in Science: A Model for Supporting School and Teacher Development

ERIC Educational Resources Information Center

Tytler, Russell

2007-01-01

"School Innovation in Science" represents a model, developed through working with more than 200 Victorian schools, to improve science teaching and learning. SIS works at the level of the science team and the teacher, providing resources to challenge and support the change process. Its emphasis is on strategic planning supported by a…

Morphometry and Connectivity of the Fronto-Parietal Verbal Working Memory Network in Development

ERIC Educational Resources Information Center

Ostby, Ylva; Tamnes, Christian K.; Fjell, Anders M.; Walhovd, Kristine B.

2011-01-01

Two distinctly different maturational processes--cortical thinning and white matter maturation--take place in the brain as we mature from late childhood to adulthood. To what extent does each contribute to the development of complex cognitive functions like working memory? The independent and joint contributions of cortical thickness of regions of…

The Role of the Company in Generating Skills. The Learning Effects of Work Organization. Denmark.

ERIC Educational Resources Information Center

Kristensen, Peer Hull; Petersen, James Hopner

The impact of developments in work organizations on the skilling process in Denmark was studied through a macro analysis of available statistical information about the development of workplace training in Denmark and case studies of three Danish firms. The macro analysis focused on the following: Denmark's vocational training system; the Danish…

"Learning to Play with New Friends": Systematic Quality Development Work in a Leisure-Time Centre

ERIC Educational Resources Information Center

Lager, Karin

2016-01-01

This article explores the recontextualisation of systematic quality development work (Sqdw) in a leisure-time centre. Two teachers' processes of planning, organisation, documentation and evaluation were investigated, the aim being to explore the recontextualisation of Sqdw in practice. The study is thus a case study of these teachers' practice…

A comparison of multi-metal deposition processes utilising gold nanoparticles and an evaluation of their application to 'low yield' surfaces for finger mark development.

PubMed

Fairley, C; Bleay, S M; Sears, V G; NicDaeid, N

2012-04-10

This paper reports a comparison of the effectiveness and practicality of using different multi-metal deposition processes for finger mark development. The work investigates whether modifications can be made to improve the performance of the existing process published by Schnetz. Secondly, we compare the ability of different multi-metal deposition processes to develop finger marks on a range of surfaces with that of other currently used development processes. All published multi-metal deposition processes utilise an initial stage of colloidal gold deposition followed by enhancement of the marks with using a physical developer. All possible combinations of colloidal gold and physical developer stages were tested. The method proposed by Schnetz was shown to be the most effective process, however a modification which reduced the pH of the enhancement solution was revealed to provide the best combination of effectiveness and practicality. In trials comparing the modified formulation with vacuum metal deposition, superglue and powder suspensions on surfaces which typically give low finger mark yields (cling film, plasticised vinyl, leather and masking tape), the modified method produced significantly better results over existing processes for cling film and plasticised vinyl. The modified formulation was found to be ineffective on both masking tape and leather. It is recommended that further tests be carried out on the modified multi-metal deposition formulation to establish whether it could be introduced for operational work on cling film material in particular. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Conceptual Models, Choices, and Benchmarks for Building Quality Work Cultures.

ERIC Educational Resources Information Center

Acker-Hocevar, Michele

1996-01-01

The two models in Florida's Educational Quality Benchmark System represent a new way of thinking about developing schools' work culture. The Quality Performance System Model identifies nine dimensions of work within a quality system. The Change Process Model provides a theoretical framework for changing existing beliefs, attitudes, and behaviors…

Prototyping Visual Learning Analytics Guided by an Educational Theory Informed Goal

ERIC Educational Resources Information Center

Hillaire, Garron; Rappolt-Schlichtmann, Gabrielle; Ducharme, Kim

2016-01-01

Prototype work can support the creation of data visualizations throughout the research and development process through paper prototypes with sketching, designed prototypes with graphic design tools, and functional prototypes to explore how the implementation will work. One challenging aspect of data visualization work is coordinating the expertise…

Anticipated Work-Family Conflict: A Construct Investigation

ERIC Educational Resources Information Center

Westring, Alyssa Friede; Ryan, Ann Marie

2011-01-01

To date, little is known about how work-family issues impact the career development process. In the current paper, we explore this issue by investigating a relatively unstudied construct: anticipated work-family conflict. We found that this construct can be represented by the same six-dimensional factor structure used to assess concurrent…

Work Design Theory: A Review and Critique with Implications for Human Resource Development

ERIC Educational Resources Information Center

Torraco, Richard J.

2005-01-01

Six theoretical perspectives on work design are examined for their contributions to our understanding of how work is organized and designed in organizations: sociotechnical systems theory, process improvement, adaptive structuration theory, the job characteristics model, technostructural change models, and activity theory. A critique of these…

The Process of Designing for Learning: Understanding University Teachers' Design Work

ERIC Educational Resources Information Center

Bennett, Sue; Agostinho, Shirley; Lockyer, Lori

2017-01-01

Interest in how to support the design work of university teachers has led to research and development initiatives that include technology-based design-support tools, online repositories, and technical specifications. Despite these initiatives, remarkably little is known about the design work that university teachers actually do. This paper…

Determinism versus Creativity: Which Way for Social Work?

ERIC Educational Resources Information Center

Peile, Colin

1993-01-01

Contends that dominant cosmology within social work is determinism. Argues for creative cosmology that can synthesize deterministic and random processes. Sees this development made possible by reconceptualization of relative nature of time. Discussion is grounded in relation to small example of social work practice, and implications of creative…

Differentiated Instruction, Professional Development, and Teacher Efficacy

ERIC Educational Resources Information Center

Dixon, Felicia A.; Yssel, Nina; McConnell, John M.; Hardin, Travis

2014-01-01

Teachers often struggle to provide all students access to specific learning activities that work best for them--and what works best for some students will not work for others. Differentiating instruction makes sense because it offers different paths to understanding content, process, and products, considering what is appropriate given a child's…

Gore offers to help drug companies pursue research.

PubMed

1996-03-08

A meeting convened between Vice President Al Gore and executives of leading pharmaceutical companies to determine means of accelerating efforts to develop vaccines, therapeutics, and microbicides for people with HIV. Gore explained that the administration will work with pharmaceutical companies to determine the long-term effectiveness of drugs approved by the Food and Drug Administration (FDA), work with international groups to increase investment in vaccine development, help develop new microbicides for women with HIV, and identify promising areas of AIDS research. According to advocates, the Clinton Administration has made great strides in improving and accelerating the FDA's drug approval process. The next goal of the pharmaceutical research agenda should be to include consumer advocates in the decision-making process.

SOI-CMOS Process for Monolithic, Radiation-Tolerant, Science-Grade Imagers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, George; Lee, Adam

In Phase I, Voxtel worked with Jazz and Sandia to document and simulate the processes necessary to implement a DH-BSI SOI CMOS imaging process. The development is based upon mature SOI CMOS process at both fabs, with the addition of only a few custom processing steps for integration and electrical interconnection of the fully-depleted photodetectors. In Phase I, Voxtel also characterized the Sandia process, including the CMOS7 design rules, and we developed the outline of a process option that included a “BOX etch”, that will permit a “detector in handle” SOI CMOS process to be developed The process flows weremore » developed in cooperation with both Jazz and Sandia process engineers, along with detailed TCAD modeling and testing of the photodiode array architectures. In addition, Voxtel tested the radiation performance of the Jazz’s CA18HJ process, using standard and circular-enclosed transistors.« less

Development of advanced fermentor control applications for use in an industrial automation environment.

PubMed

Hamilton, Ryan; Tamminana, Krishna; Boyd, John; Sasaki, Gen; Toda, Alex; Haskell, Sid; Danbe, Elizabeth

2013-04-01

We present a software platform developed by Genentech and MathWorks Consulting Group that allows arbitrary MATLAB (MATLAB is a registered trademark of The MathWorks, Inc.) functions to perform supervisory control of process equipment (in this case, fermentors) via the OLE for process control (OPC) communication protocol, under the direction of an industrial automation layer. The software features automated synchronization and deployment of server control code and has been proven to be tolerant of OPC communication interruptions. Since deployment in the spring of 2010, this software has successfully performed supervisory control of more than 700 microbial fermentations in the Genentech pilot plant and has enabled significant reductions in the time required to develop and implement novel control strategies (months reduced to days). The software is available for download at the MathWorks File Exchange Web site at http://www.mathworks.com/matlabcentral/fileexchange/36866.

International Journal of Educology: A Journal of Research, Inquiry and Development about the Educational Process from an Educological Perspective, 1987-1991.

ERIC Educational Resources Information Center

Christensen, James E., Ed.; Fisher, James E., Ed.

1991-01-01

The "International Journal of Educology" publishes works that examine the educational process from an educological perspective. The term educology means knowledge about education and has been in use since the seminal work in educology by L. W. Harding in the 1950s. The educological perspective is inclusive of scientific, praxiological,…

Towards a Sufficient Theory of Transition in Cognitive Development.

ERIC Educational Resources Information Center

Wallace, J. G.

The work reported aims at the construction of a sufficient theory of transition in cognitive development. The method of theory construction employed is computer simulation of cognitive process. The core of the model of transition presented comprises self-modification processes that, as a result of continuously monitoring an exhaustive record of…

A Collaborative Role for Industry in Assessing Student Learning. AIR 1999 Annual Forum Paper.

ERIC Educational Resources Information Center

McMartin, Flora

This paper recounts the process of integrating industry into the assessment process in engineering education developed by the Synthesis Coalition, a group of colleges and schools working together to improve engineering education through development and implementation of curriculum reforms. Originating in the Coalition's efforts to introduce…

Distributed Group Design Process: Lessons Learned.

ERIC Educational Resources Information Center

Eseryel, Deniz; Ganesan, Radha

A typical Web-based training development team consists of a project manager, an instructional designer, a subject-matter expert, a graphic artist, and a Web programmer. The typical scenario involves team members working together in the same setting during the entire design and development process. What happens when the team is distributed, that is…

[A typology for nursing processes exemplified by the "Nursing Process, Standardization and Quality in the Nursing Care Sector" Project].

PubMed

Güttler, Karen; Lehmann, Almut

2003-06-01

This paper is based on the project "nursing process, standardisation and quality in nursing care" which is funded by the BMBF. This venture aims to develop and constitute a structure for recordation and documentation of nursing processes in terms of a typology and to standardise patients data for an exchange. The typology results from both the outcomes of the actual analysis of 128 patients in hospitals, homes for the elderly and community health care centers and the research on nursing classifications. The contents of the typology has been developed in co-operation with nurses working in such institutions. The structure and transfer of the data set will be realised by an IT media based network. The range of the project is regional, national and international. In this project the Bremen Institute of Industrial Technology and Applied Work Science (BIBA-ATOP) was responsible for the project management and the development of the IT based structure of the typology. The contents of the typology have been developed by the Institute of Applied Nursing Research (iap).

How Schools Are Using Action Research on Practical Work, New Technologies and Research and Development to Improve Student Outcomes

ERIC Educational Resources Information Center

Davenport, Carol

2013-01-01

Three methods from different schools illustrate how the cyclic process of action research can be used to develop teaching skills. The importance of learning from successful and unsuccessful lessons or parts of lessons is emphasised as the basis for development and improvement. This process can be carried out on an individual basis but development…

EUV process improvement with novel litho track hardware

NASA Astrophysics Data System (ADS)

Stokes, Harold; Harumoto, Masahiko; Tanaka, Yuji; Kaneyama, Koji; Pieczulewski, Charles; Asai, Masaya

2017-03-01

Currently, there are many developments in the field of EUV lithography that are helping to move it towards increased HVM feasibility. Targeted improvements in hardware design for advanced lithography are of interest to our group specifically for metrics such as CD uniformity, LWR, and defect density. Of course, our work is focused on EUV process steps that are specifically affected by litho track performance, and consequently, can be improved by litho track design improvement and optimization. In this study we are building on our experience to provide continual improvement for LWR, CDU, and Defects as applied to a standard EUV process by employing novel hardware solutions on our SOKUDO DUO coat develop track system. Although it is preferable to achieve such improvements post-etch process we feel, as many do, that improvements after patterning are a precursor to improvements after etching. We hereby present our work utilizing the SOKUDO DUO coat develop track system with an ASML NXE:3300 in the IMEC (Leuven, Belgium) cleanroom environment to improve aggressive dense L/S patterns.

The production of fine grained magnesium alloys through thermomechanical processing for the optimization of microstructural and mechanical properties

NASA Astrophysics Data System (ADS)

Young, John Paul

The low density and high strength to weight ratio of magnesium alloys makes them ideal candidates to replace many of the heavier steel and aluminum alloys currently used in the automotive and other industries. Although cast magnesium alloys components have a long history of use in the automotive industry, the integration of wrought magnesium alloys components has been hindered by a number of factors. Grain refinement through thermomechanical processing offers a possible solution to many of the inherent problems associated with magnesium alloys. This work explores the development of several thermomechanical processing techniques and investigates their impact on the microstructural and mechanical properties of magnesium alloys. In addition to traditional thermomechanical processing, this work includes the development of new severe plastic deformation techniques for the production of fine grain magnesium plate and pipe and develops a procedure by which the thermal microstructural stability of severely plastically deformed microstructures can be assessed.

Tone series and the nature of working memory capacity development.

PubMed

Clark, Katherine M; Hardman, Kyle O; Schachtman, Todd R; Saults, J Scott; Glass, Bret A; Cowan, Nelson

2018-04-01

Recent advances in understanding visual working memory, the limited information held in mind for use in ongoing processing, are extended here to examine auditory working memory development. Research with arrays of visual objects has shown how to distinguish the capacity, in terms of the number of objects retained, from the precision of the object representations. We adapt the technique to sequences of nonmusical tones, in an investigation including children (6-13 years, N = 84) and adults (26-50 years, N = 31). For each series of 1 to 4 tones, the participant responded by using an 80-choice scale to try to reproduce the tone at a queried serial position. Despite the much longer-lasting usefulness of sensory memory for tones compared with visual objects, the observed tone capacity was similar to previous findings for visual capacity. The results also constrain theories of childhood working memory development, indicating increases with age in both the capacity and the precision of the tone representations, similar to the visual studies, rather than age differences in time-based memory decay. The findings, including patterns of correlations between capacity, precision, and some auxiliary tasks and questionnaires, establish capacity and precision as dissociable processes and place important constraints on various hypotheses of working memory development. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Development of a Fiber Laser Welding Capability for the W76, MC4702 Firing Set

DOE Office of Scientific and Technical Information (OSTI.GOV)

Samayoa, Jose

2010-05-12

Development work to implement a new welding system for a Firing Set is presented. The new system is significant because it represents the first use of fiber laser welding technology at the KCP. The work used Six-Sigma tools for weld characterization and to define process performance. Determinations of workable weld parameters and comparison to existing equipment were completed. Replication of existing waveforms was done utilizing an Arbitrary Pulse Generator (APG), which was used to modulate the fiber laser’s exclusive continuous wave (CW) output. Fiber laser weld process capability for a Firing Set is demonstrated.

Baseline LAW Glass Formulation Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kruger, Albert A.; Mooers, Cavin; Bazemore, Gina

2013-06-13

The major objective of the baseline glass formulation work was to develop and select glass formulations that are compliant with contractual and processing requirements for each of the LAW waste streams. Other objectives of the work included preparation and characterization of glasses with respect to the properties of interest, optimization of sulfate loading in the glasses, evaluation of ability to achieve waste loading limits, testing to demonstrate compatibility of glass melts with melter materials of construction, development of glass formulations to support ILAW qualification activities, and identification of glass formulation issues with respect to contract specifications and processing requirements.

Louhi 2010: Special issue on Text and Data Mining of Health Documents

PubMed Central

2011-01-01

The papers presented in this supplement focus and reflect on computer use in every-day clinical work in hospitals and clinics such as electronic health record systems, pre-processing for computer aided summaries, clinical coding, computer decision systems, as well as related ethical concerns and security. Much of this work concerns itself by necessity with incorporation and development of language processing tools and methods, and as such this supplement aims at providing an arena for reporting on development in a diversity of languages. In the supplement we can read about some of the challenges identified above. PMID:21992545

Intervention mapping for development of a participatory return-to-work intervention for temporary agency workers and unemployed workers sick-listed due to musculoskeletal disorders

PubMed Central

Vermeulen, Sylvia J; Anema, Johannes R; Schellart, Antonius JM; van Mechelen, Willem; van der Beek, Allard J

2009-01-01

Background In the past decade in activities aiming at return-to-work (RTW), there has been a growing awareness to change the focus from sickness and work disability to recovery and work ability. To date, this process in occupational health care (OHC) has mainly been directed towards employees. However, within the working population there are two vulnerable groups: temporary agency workers and unemployed workers, since they have no workplace/employer to return to, when sick-listed. For this group there is a need for tailored RTW strategies and interventions. Therefore, this paper aims to describe the structured and stepwise process of development, implementation and evaluation of a theory- and practise-based participatory RTW program for temporary agency workers and unemployed workers, sick-listed due to musculoskeletal disorders (MSD). This program is based on the already developed and cost-effective RTW program for employees, sick-listed due to low back pain. Methods The Intervention Mapping (IM) protocol was used to develop a tailor-made RTW program for temporary agency workers and unemployed workers, sick-listed due to MSD. The Attitude-Social influence-self-Efficacy (ASE) model was used as a theoretical framework for determinants of behaviour regarding RTW of the sick-listed worker and development of the intervention. To ensure participation and facilitate successful adoption and implementation, important stakeholders were involved in all steps of program development and implementation. Results of semi-structured interviews and 'fine-tuning' meetings were used to design the final participatory RTW program. Results A structured stepwise RTW program was developed, aimed at making a consensus-based RTW implementation plan. The new program starts with identifying obstacles for RTW, followed by a brainstorm session in which the sick-listed worker and the labour expert of the Social Security Agency (SSA) formulate solutions/possibilities for suitable (therapeutic) work. This process is guided by an independent RTW coordinator to achieve consensus. Based on the resulting RTW implementation plan, to create an actual RTW perspective, a vocational rehabilitation agency is assigned to find a matching (therapeutic) workplace. The cost-effectiveness of this participatory RTW program will be evaluated in a randomised controlled trial. Conclusion IM is a promising tool for the development of tailor-made OHC interventions for the vulnerable working population. PMID:19573229

76 FR 2084 - Pacific Fishery Management Council; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-12

... Pacific Fishery Management Council's (Council) Ad Hoc Groundfish Process Improvement Committee (PIC) will... the PIC work session is to develop an optimum detailed process and schedule for the 2013-14 groundfish...

How high-performance work systems drive health care value: an examination of leading process improvement strategies.

PubMed

Robbins, Julie; Garman, Andrew N; Song, Paula H; McAlearney, Ann Scheck

2012-01-01

As hospitals focus on increasing health care value, process improvement strategies have proliferated, seemingly faster than the evidence base supporting them. Yet, most process improvement strategies are associated with work practices for which solid evidence does exist. Evaluating improvement strategies in the context of evidence-based work practices can provide guidance about which strategies would work best for a given health care organization. We combined a literature review with analysis of key informant interview data collected from 5 case studies of high-performance work practices (HPWPs) in health care organizations. We explored the link between an evidence-based framework for HPWP use and 3 process improvement strategies: Hardwiring Excellence, Lean/Six Sigma, and Baldrige. We found that each of these process improvement strategies has not only strengths but also important gaps with respect to incorporating HPWPs involving engaging staff, aligning leaders, acquiring and developing talent, and empowering the front line. Given differences among these strategies, our analyses suggest that some may work better than others for individual health care organizations, depending on the organizations' current management systems. In practice, most organizations implementing improvement strategies would benefit from including evidence-based HPWPs to maximize the potential for process improvement strategies to increase value in health care.

Nuclear education and training: marriages that work

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hanson, H.D.

1985-11-01

Public Service Electric and Gas Company is meeting the education and training needs of its nuclear department operations, support, and services personnel through a variety of activities in association with institutions of higher education. Activities include credit or credit recommendation programs at the associates, undergraduate, and graduate degree level. The paper emphasizes the process of working with a local college in the development of a new degree program for submission through the State Board of Education. The development, review, evaluation, and approval process is detailed as well as lessons learned. Plans for further development of the program toward ABET accreditationmore » are also described. Samples of the surveys conducted to determine employee interest in terms of academic area, academic level, offering strategies, etc. are presented. The process of soliciting program proposals from universities and colleges, the selection process, and implementation of the programs are also discussed. More briefly described is the preparation for credit recommendation process from regionally accredited groups. External degree programs, off-hours course presentations on-site for undergraduate and graduate credit, faculty extern, student intern, and co-op activities are also discussed.« less

Application of the OCRA Method in the sugar cane harvest and its repercussion on the workers' health. Preliminary study.

PubMed

Ruddy, Facci; Eduardo, Marcatto; Edoardo, Santino

2012-01-01

In Brazil the sugar ethanol industry has had strong growth in the last 10 years, sometimes due to the growing sugar exportation, sometimes due to the alcohol production for automobile fuel and for exportation. Despite the growing mechanization of the raw material harvest (sugar cane), the manual work still persists. The development of this article was based in the application of the OCRA Method in the sugar cane harvesting process, to evaluate the risks to the upper limbs by repetitive movements and epidemiologically prove the ratio risk x harm to the heath of the workers, as well as the probability of developing improvements in the working conditions. The analysis process consists of studying the work organization, the risks to the health of the worker and the distribution of the recovery periods during the working day.

Learning for sustainability among faith-based organizations in Kenya.

PubMed

Moyer, Joanne M; Sinclair, A John; Diduck, Alan P

2014-08-01

The complex and unpredictable contexts in which environmental and development work take place require an adaptable, learning approach. Faith-based organizations (FBOs) play a significant role in sustainability work around the world, and provide a unique setting in which to study learning. This paper explores individual learning for sustainability within two FBOs engaged in sustainability work in Kenya. Learning outcomes covered a broad range of areas, including the sustainability framework, environment/conservation, skills, community work, interpersonal engagement, and personal and faith development. These outcomes were acquired through embodied experience and activity, facilitation by the workplace, interpersonal interaction, personal reflection, and Bible study and worship. Grounded categories were compared to learning domains and processes described by Mezirow's transformative learning theory. The findings indicate that for learning in the sustainability field, instrumental learning and embodied learning processes are particularly important, and consequently they require greater attention in the theory when applied in this field.

Learning for Sustainability Among Faith-Based Organizations in Kenya

NASA Astrophysics Data System (ADS)

Moyer, Joanne M.; Sinclair, A. John; Diduck, Alan P.

2014-08-01

The complex and unpredictable contexts in which environmental and development work take place require an adaptable, learning approach. Faith-based organizations (FBOs) play a significant role in sustainability work around the world, and provide a unique setting in which to study learning. This paper explores individual learning for sustainability within two FBOs engaged in sustainability work in Kenya. Learning outcomes covered a broad range of areas, including the sustainability framework, environment/conservation, skills, community work, interpersonal engagement, and personal and faith development. These outcomes were acquired through embodied experience and activity, facilitation by the workplace, interpersonal interaction, personal reflection, and Bible study and worship. Grounded categories were compared to learning domains and processes described by Mezirow's transformative learning theory. The findings indicate that for learning in the sustainability field, instrumental learning and embodied learning processes are particularly important, and consequently they require greater attention in the theory when applied in this field.

A Clinical Case Presentation: Understanding and Interpreting Dreams while Working Through Developmental Trauma.

PubMed

Levy, Joshua; Finnegan, Paul

2016-02-01

The purpose of this paper is to demonstrate the unique place of understanding and interpreting dreams in the psychoanalytic process while working through developmental trauma. This psychoanalytic process extended over six years and is presented in four phases: establishing the therapeutic alliance, a crisis, working through, and termination. Dreams from each of these four phases of the analysis are presented, and the collaborative work of understanding and interpreting these dreams is highlighted. Evidence is presented that from this analytic work there ensued an amelioration of the impact of developmental trauma and a furtherance of the development of internal psychic structure. © 2016 by the American Psychoanalytic Association.

Processing of sputter targets using current activated pressure assisted densification

NASA Astrophysics Data System (ADS)

Chaney, Neil Russell

Thin Film deposition is a process that has been around since the beginning of the twentieth century and has become an integral part of the microfabrication and nanofabrication industries. Sputter deposition is a method of physical vapor deposition (PVD) in which a target is bombarded with ions and atoms are ejected and deposited as a thin film on a substrate. Despite extensive research on the direct process of sputtering thin films from targets to substrates, not much work has been done on studying the effect of processing on the microstructure of a target. In the first part of this work, the development of a PVD chamber is explored along with a few modifications and improvements developed along the way. A multiple process PVD chamber was equipped with three different types of PVD processes: sputtering, evaporation, and electron-beam deposition. In the second part of this work, the effect of processing of sputter targets on deposited films is explored. Multiple targets of Copper and yttria stabilized zirconia were produced using CAPAD. The effect of the processing on the microstructure of the targets was determined. The targets were then sputtered into films to study the effects of the target grain size on their properties. The effect of power and pressure were also measured. Increased power led to increased deposition rates while higher vacuum caused deposition rates to decrease.

Review of Manganese Processing for Production of TRIP/TWIP Steels, Part 1: Current Practice and Processing Fundamentals

NASA Astrophysics Data System (ADS)

Elliott, R.; Coley, K.; Mostaghel, S.; Barati, M.

2018-02-01

The increasing demand for high-performance steel alloys has led to development of transformation-induced plasticity (TRIP) and twinning-induced plasticity (TWIP) alloys over the past three decades. These alloys offer exceptional combinations of high tensile strength and ductility. Thus, the mechanical behavior of these alloys has been a subject of significant work in recent years. However, the challenge of economically providing Mn in the quantity and purity required by these alloys has received considerably less attention. To enable commercial implementation of ultrahigh-Mn alloys, it is desirable to lower the high material costs associated with their production. Therefore, the present work reviews Mn processing routes in the context of the chemical requirements of these alloys. The aim of this review is to assess the current state of the art regarding reduction of manganese ores and provide a comprehensive reference for researchers working to mitigate material processing costs associated with Mn production. The review is presented in two parts: Part 1 introduces TRIP and TWIP alloys, current industrial practice, and pertinent thermodynamic fundamentals; Part 2 addresses available literature regarding reduction of Mn ores and oxides, and seeks to identify opportunities for future process development.

Creating Your Life's Work Portfolio. An Interactive Career and Life Planning Workbook.

ERIC Educational Resources Information Center

1998

Designed for those beginning a working life or with years of experience, this book leads the user through collecting records that document work history and affirm successes. It provides a step-by-step process to help plan one's life's work, make career decisions, and develop plans for new career directions and a structure to learn career planning…

ExMC Work Prioritization Process

NASA Technical Reports Server (NTRS)

Simon, Matthew

2015-01-01

Last year, NASA's Human Research Program (HRP) introduced the concept of a "Path to Risk Reduction" (PRR), which will provide a roadmap that shows how the work being done within each HRP element can be mapped to reducing or closing exploration risks. Efforts are currently underway within the Exploration Medical Capability (ExMC) Element to develop a structured, repeatable process for prioritizing work utilizing decision analysis techniques and risk estimation tools. The goal of this effort is to ensure that the work done within the element maximizes risk reduction for future exploration missions in a quantifiable way and better aligns with the intent and content of the Path to Risk Reduction. The Integrated Medical Model (IMM) will be used to identify those conditions that are major contributors of medical risk for a given design reference mission. For each of these conditions, potential prevention, screening, diagnosis, and treatment methods will be identified. ExMC will then aim to prioritize its potential investments in these mitigation methods based upon their potential for risk reduction and other factors such as vehicle performance impacts, near term schedule needs, duplication with external efforts, and cost. This presentation will describe the process developed to perform this prioritization and inform investment discussions in future element planning efforts. It will also provide an overview of the required input information, types of process participants, figures of merit, and the expected outputs of the process.

Operation, Modeling and Analysis of the Reverse Water Gas Shift Process

NASA Technical Reports Server (NTRS)

Whitlow, Jonathan E.

2001-01-01

The Reverse Water Gas Shift process is a candidate technology for water and oxygen production on Mars under the In-Situ Propellant Production project. This report focuses on the operation and analysis of the Reverse Water Gas Shift (RWGS) process, which has been constructed at Kennedy Space Center. A summary of results from the initial operation of the RWGS, process along with an analysis of these results is included in this report. In addition an evaluation of a material balance model developed from the work performed previously under the summer program is included along with recommendations for further experimental work.

How clinical observation enhances recruitment and selection.

PubMed

Sutherland, Clare

2012-11-01

A survey of nurse managers in Derby Hospitals NHS Foundation Trust in 2010 found 51 practitioners working at an advanced clinical level, but there were variations in titles, pay bands, clinical skills and academic qualifications. This prompted the introduction of a local framework to support the development of the advanced nurse practitioner (ANP) role and a review of the interview process to enable managers to assess applicants' skills, competencies and knowledge. The process is now used in practice, with candidates' clinical skills now observed as part of the ANP selection process. This article describes how the new process works.

Attachment in Middle Childhood: Associations with Information Processing

ERIC Educational Resources Information Center

Zimmermann, Peter; Iwanski, Alexandra

2015-01-01

Attachment theory suggests that internal working models of self and significant others influence adjustment during development by controlling information processing and self-regulation. We provide a conceptual overview on possible mechanisms linking attachment and information processing and review the current literature in middle childhood.…

23 CFR 630.1008 - State-level processes and procedures.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., data and information resources, training, and periodic evaluation enable a systematic approach for... management procedures. States should develop and implement systematic procedures to assess work zone impacts... practices and State processes and procedures. (e) Process review. In order to assess the effectiveness of...

[Development of a medical equipment support information system based on PDF portable document].

PubMed

Cheng, Jiangbo; Wang, Weidong

2010-07-01

According to the organizational structure and management system of the hospital medical engineering support, integrate medical engineering support workflow to ensure the medical engineering data effectively, accurately and comprehensively collected and kept in electronic archives. Analyse workflow of the medical, equipment support work and record all work processes by the portable electronic document. Using XML middleware technology and SQL Server database, complete process management, data calculation, submission, storage and other functions. The practical application shows that the medical equipment support information system optimizes the existing work process, standardized and digital, automatic and efficient orderly and controllable. The medical equipment support information system based on portable electronic document can effectively optimize and improve hospital medical engineering support work, improve performance, reduce costs, and provide full and accurate digital data

Relation between Working Memory Capacity and Auditory Stream Segregation in Children with Auditory Processing Disorder

PubMed Central

Lotfi, Yones; Mehrkian, Saiedeh; Moossavi, Abdollah; Zadeh, Soghrat Faghih; Sadjedi, Hamed

2016-01-01

Background: This study assessed the relationship between working memory capacity and auditory stream segregation by using the concurrent minimum audible angle in children with a diagnosed auditory processing disorder (APD). Methods: The participants in this cross-sectional, comparative study were 20 typically developing children and 15 children with a diagnosed APD (age, 9–11 years) according to the subtests of multiple-processing auditory assessment. Auditory stream segregation was investigated using the concurrent minimum audible angle. Working memory capacity was evaluated using the non-word repetition and forward and backward digit span tasks. Nonparametric statistics were utilized to compare the between-group differences. The Pearson correlation was employed to measure the degree of association between working memory capacity and the localization tests between the 2 groups. Results: The group with APD had significantly lower scores than did the typically developing subjects in auditory stream segregation and working memory capacity. There were significant negative correlations between working memory capacity and the concurrent minimum audible angle in the most frontal reference location (0° azimuth) and lower negative correlations in the most lateral reference location (60° azimuth) in the children with APD. Conclusion: The study revealed a relationship between working memory capacity and auditory stream segregation in children with APD. The research suggests that lower working memory capacity in children with APD may be the possible cause of the inability to segregate and group incoming information. PMID:26989281

Developing an occupational skills profile for the emerging profession of "big-data-enabled professional"

NASA Astrophysics Data System (ADS)

Kastens, K. A.; Malyn-Smith, J.; Ippolito, J.; Krumhansl, R.

2014-12-01

In August of 2014, the Oceans of Data Institute at Education Development Center, Inc. (EDC) is convening an expert panel to begin the process of developing an occupational skills profile for the "big-data-enabled professional." We define such a professional as an "individual who works with large complex data sets on a regular basis, asking and answering questions, analyzing trends, and finding meaningful patterns, in order to increase the efficiency of processes, make decisions and predictions, solve problems, generate hypotheses, and/or develop new understandings." The expert panel includes several geophysicists, as well as data professionals from engineering, higher education, analytical journalism, forensics, bioinformatics, and telecommunications. Working with experienced facilitators, the expert panel will create a detailed synopsis of the tasks and responsibilities characteristic of their profession, as well as the skills, knowledge and behaviors that enable them to succeed in the workplace. After the panel finishes their work, the task matrix and associated narrative will be vetted and validated by a larger group of additional professionals, and then disseminated for use by educators and employers. The process we are using is called DACUM (Developing a Curriculum), adapted by EDC and optimized for emergent professions, such as the "big-data-enabled professional." DACUM is a well-established method for analyzing jobs and occupations, commonly used in technical fields to develop curriculum and training programs that reflect authentic work tasks found in scientific and technical workplaces. The premises behind the DACUM approach are that: expert workers are better able to describe their own occupation than anyone else; any job can be described in terms of the tasks that successful workers in the occupation perform; all tasks have direct implications for the knowledge, skills, understandings and attitudes that must be taught and learned in preparation for the targeted career. At AGU, we will describe the process and present the finalized occupational profile.

Progress in the Development of a Prototype Reuse Enablement System

NASA Astrophysics Data System (ADS)

Marshall, J. J.; Downs, R. R.; Gilliam, L. J.; Wolfe, R. E.

2008-12-01

An important part of promoting software reuse is to ensure that reusable software assets are readily available to the software developers who want to use them. Through dialogs with the community, the NASA Earth Science Data Systems Software Reuse Working Group has learned that the lack of a centralized, domain- specific software repository or catalog system addressing the needs of the Earth science community is a major barrier to software reuse within the community. The Working Group has proposed the creation of such a reuse enablement system, which would provide capabilities for contributing and obtaining reusable software, to remove this barrier. The Working Group has recommended the development of a Reuse Enablement System to NASA and has performed a trade study to review systems with similar capabilities and to identify potential platforms for the proposed system. This was followed by an architecture study to determine an expeditious and cost-effective solution for this system. A number of software packages and systems were examined through both creating prototypes and examining existing systems that use the same software packages and systems. Based on the results of the architecture study, the Working Group developed a prototype of the proposed system using the recommended software package, through an iterative process of identifying needed capabilities and improving the system to provide those capabilities. Policies for the operation and maintenance of the system are being established for the system, and the identification of system policies also has contributed to the development process. Additionally, a test plan is being developed for formal testing of the prototype, to ensure that it meets all of the requirements previously developed by the Working Group. This poster summarizes the results of our work to date, focusing on the most recent activities.

Development of a standardized, citywide process for managing smart-pump drug libraries.

PubMed

Walroth, Todd A; Smallwood, Shannon; Arthur, Karen; Vance, Betsy; Washington, Alana; Staublin, Therese; Haslar, Tammy; Reddan, Jennifer G; Fuller, James

2018-06-15

Development and implementation of an interprofessional consensus-driven process for review and optimization of smart-pump drug libraries and dosing limits are described. The Indianapolis Coalition for Patient Safety (ICPS), which represents 6 Indianapolis-area health systems, identified an opportunity to reduce clinically insignificant alerts that smart infusion pumps present to end users. Through a consensus-driven process, ICPS aimed to identify best practices to implement at individual hospitals in order to establish specific action items for smart-pump drug library optimization. A work group of pharmacists, nurses, and industrial engineers met to evaluate variability within and lack of scrutiny of smart-pump drug libraries. The work group used Lean Six Sigma methodologies to generate a list of key needs and barriers to be addressed in process standardization. The group reviewed targets for smart-pump drug library optimization, including dosing limits, types of alerts reviewed, policies, and safety best practices. The work group also analyzed existing processes at each site to develop a final consensus statement outlining a model process for reviewing alerts and managing smart-pump data. Analysis of the total number of alerts per device across ICPS-affiliated health systems over a 4-year period indicated a 50% decrease (from 7.2 to 3.6 alerts per device per month) after implementation of the model by ICPS member organizations. Through implementation of a standardized, consensus-driven process for smart-pump drug library optimization, ICPS member health systems reduced clinically insignificant smart-pump alerts. Copyright © 2018 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

Advances toward industrialization of novel molten salt electrochemical processes.

PubMed

Ito, Yasuhiko; Nishikiori, Tokujiro; Tsujimura, Hiroyuki

2016-08-15

We have invented various novel molten salt electrochemical processes, that can be put to practical use in the fields of energy and materials. These processes are promising from both technological and commercial viewpoints, and they are currently under development for industrial application. To showcase current developments in work toward industrialization, we focus here on three of these processes: (1) electrolytic synthesis of ammonia from water and nitrogen under atmospheric pressure, (2) electrochemical formation of carbon film, and (3) plasma-induced discharge electrolysis to produce nanoparticles.

Advanced methods for processing ceramics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carter, W.B.

1997-04-01

Combustion chemical vapor deposition (combustion CVD) is being developed for the deposition of high temperature oxide coatings. The process is being evaluated as an alternative to more capital intensive conventional coating processes. The thrusts during this reporting period were the development of the combustion CVD process for depositing lanthanum monazite, the determination of the influence of aerosol size on coating morphology, the incorporation of combustion CVD coatings into thermal barrier coatings (TBCs) and related oxidation research, and continued work on the deposition of zirconia-yttria coatings.

Dopaminergic and cholinergic modulations of visual-spatial attention and working memory: insights from molecular genetic research and implications for adult cognitive development.

PubMed

Störmer, Viola S; Passow, Susanne; Biesenack, Julia; Li, Shu-Chen

2012-05-01

Attention and working memory are fundamental for selecting and maintaining behaviorally relevant information. Not only do both processes closely intertwine at the cognitive level, but they implicate similar functional brain circuitries, namely the frontoparietal and the frontostriatal networks, which are innervated by cholinergic and dopaminergic pathways. Here we review the literature on cholinergic and dopaminergic modulations of visual-spatial attention and visual working memory processes to gain insights on aging-related changes in these processes. Some extant findings have suggested that the cholinergic system plays a role in the orienting of attention to enable the detection and discrimination of visual information, whereas the dopaminergic system has mainly been associated with working memory processes such as updating and stabilizing representations. However, since visual-spatial attention and working memory processes are not fully dissociable, there is also evidence of interacting cholinergic and dopaminergic modulations of both processes. We further review gene-cognition association studies that have shown that individual differences in visual-spatial attention and visual working memory are associated with acetylcholine- and dopamine-relevant genes. The efficiency of these 2 transmitter systems declines substantially during healthy aging. These declines, in part, contribute to age-related deficits in attention and working memory functions. We report novel data showing an effect of dopamine COMT gene on spatial updating processes in older but not in younger adults, indicating potential magnification of genetic effects in old age.

Attachment, mastery, and interdependence: a model of parenting processes.

PubMed

Edwards, Martha E

2002-01-01

A democratic nation needs an interdependent citizenry who are not only competent but who also can live together cooperatively with an eye toward what will benefit the whole as well as the self. In this article, the concept of interdependence is adopted as the central goal of parenting. The Parenting Processes Model is then presented, specifying how caregivers help children develop this interdependence. This work draws upon and integrates the work of a number of theoreticians, researchers, and clinicians, with the central focus on the work of John Bowlby, Alfred Adler, and Lev Vygotsky.

Making the purchase decision: factors other than price.

PubMed

Lyons, D M

1992-05-01

Taking price out of the limelight and concentrating on customer relations, mutual respect, and build-in/buy-in; involving the user; developing communication and evaluation processes; and being process oriented to attain the results needed require commitment on the part of administration and materiel management. There must be a commitment of time to develop the process, commitment of resources to work through the process, and a commitment of support to enhance the process. With those three parameters in place, price will no longer be the only factor in the purchasing decision.

Editing in Technical Communication: Theory and Practice in Editing Processes at the Graduate Level.

ERIC Educational Resources Information Center

Masse, Roger E.

At New Mexico State University, technical communication teachers have developed a course to teach editing processes to graduate students who take the advanced workshop in technical and professional communication. In this seminar group, students work on writing processes; editing processes; written, edited, and tested products; and oral processes…

Developing Specific Self-Efficacy and Resilience as First Responders among Students of Social Work and Stress and Trauma Studies

ERIC Educational Resources Information Center

Farchi, Moshe; Cohen, Ayala; Mosek, Atalia

2014-01-01

This article addresses the challenging task of preparing baccalaureate social work students to master proficiency as first responders in stress and trauma situations. We begin with a brief description of the context, goals, admission procedure, structure, and process of a stress and trauma studies (STS) program. We then compare the development of…

Thinking Outside the Box While Playing the Game: A Creative School-Based Approach to Working with Children and Adolescents

ERIC Educational Resources Information Center

Martinez, Angel; Lasser, Jon

2013-01-01

The process of creating child-developed board games in a counseling setting may promote social, emotional, and behavioral development in children. Using this creative approach, counselors can actively work with children to address referred concerns and build skills that may generalize outside of counseling sessions. A description of the method is…

The Importance of Process-Oriented Accessibility Guidelines for Web Developers.

PubMed

Steen-Hansen, Linn; Fagernes, Siri

2016-01-01

Current accessibility research shows that in the web development, the process itself may lead to inaccessible web sites and applications. Common practices typically do not allow sufficient testing. The focus is mainly on complying with minimum standards, and treating accessibility compliance as a sort of bug-fixing process, missing the user perspective. In addition, there is an alarming lack of knowledge and experience with accessibility issues. It has also been argued that bringing accessibility into the development process at all stages is the only way to achieve the highest possible level of accessibility. The work presented in this paper is based on a previous project focusing on guidelines for developing accessible rich Internet applications. The guidelines were classified as either process-oriented or technology-oriented. In this paper, we examine the process-oriented guidelines and give a practical perspective on how these guidelines will make the development process more accessibility-friendly.

Effective Decision Maker-Scientist Engagement:Climate Change Vulnerability Analysis of California's Water System to Using Decision Scaling.

NASA Astrophysics Data System (ADS)

Schwarz, A. M.; Ray, P.; Brown, C.; Wi, S.

2016-12-01

For nearly 2 years the California Department of Water Resources (CDWR) has been working with the University of Massachusetts Amherst (UMass) to evaluate climate change vulnerabilities to the California State Water Project. Working cooperatively, the team has developed tools and methods to employ a decision scaling approach to CDWR's existing water system model (CalSim-II/CalLite 3.0). This presentation will discuss how and why this partnership came to be, the co-production model the team has developed to share expertise, the new understanding of the system that has been gained through the process, and current and future efforts to influence planning and investments based on the findings of the work. This cooperative decision-maker-with-scientist engagement is unique in that CDWR has not outsourced the application of the science to their systems, and instead has worked directly with UMass researchers to develop the process, produce results, and interpret findings. Further, CDWR staff has worked with UMass researchers to present results in ways that are more useable and actionable for decision-makers. As will be shown, many of these graphics allow the team to use the science differently to improve decision making.

Building an outpatient imaging center: A case study at genesis healthcare system, part 2.

PubMed

Yanci, Jim

2006-01-01

In the second of 2 parts, this article will focus on process improvement projects utilizing a case study at Genesis HealthCare System located in Zanesville, OH. Operational efficiency is a key step in developing a freestanding diagnostic imaging center. The process improvement projects began with an Expert Improvement Session (EIS) on the scheduling process. An EIS session is a facilitated meeting that can last anywhere from 3 hours to 2 days. Its intention is to take a group of people involved with the problem or operational process and work to understand current failures or breakdowns in the process. Recommendations are jointly developed to overcome any current deficiencies, and a work plan is structured to create ownership over the changes. A total of 11 EIS sessions occurred over the course of this project, covering 5 sections: Scheduling/telephone call process, Pre-registration, Verification/pre-certification, MRI throughput, CT throughput. Following is a single example of a project focused on the process improvement efforts. All of the process improvement projects utilized a quasi methodology of "DMAIC" (Define, Measure, Analyze, Improve, and Control).

Evaluating the iterative development of VR/AR human factors tools for manual work.

PubMed

Liston, Paul M; Kay, Alison; Cromie, Sam; Leva, Chiara; D'Cruz, Mirabelle; Patel, Harshada; Langley, Alyson; Sharples, Sarah; Aromaa, Susanna

2012-01-01

This paper outlines the approach taken to iteratively evaluate a set of VR/AR (virtual reality / augmented reality) applications for five different manual-work applications - terrestrial spacecraft assembly, assembly-line design, remote maintenance of trains, maintenance of nuclear reactors, and large-machine assembly process design - and examines the evaluation data for evidence of the effectiveness of the evaluation framework as well as the benefits to the development process of feedback from iterative evaluation. ManuVAR is an EU-funded research project that is working to develop an innovative technology platform and a framework to support high-value, high-knowledge manual work throughout the product lifecycle. The results of this study demonstrate the iterative improvements reached throughout the design cycles, observable through the trending of the quantitative results from three successive trials of the applications and the investigation of the qualitative interview findings. The paper discusses the limitations of evaluation in complex, multi-disciplinary development projects and finds evidence of the effectiveness of the use of the particular set of complementary evaluation methods incorporating a common inquiry structure used for the evaluation - particularly in facilitating triangulation of the data.

Smart information system for gachon university gil hospital.

PubMed

Park, Dong Kyun; Jung, Eun Young; Jeong, Byung Hui; Moon, Byung Chan; Kang, Hyung Wook; Tchah, Hann; Han, Gi Seong; Cheng, Woo Sung; Lee, Young Ho

2012-03-01

In this research, the hospital information system of Gachon University Gil hospital is introduced and a future strategy for hospital information systems is proposed. This research introduces the development conditions of hospital information system at Gachon University Gil hospital, information about the development of the enterprise resource planning (ERP), a medical service process improvement system, and the personal health record (PHR) system. The medical service process and work efficiency were improved through the medical service process improvement system, which is the most common hospital information system at Gachon University Gil hospital and which includes an emergency medical service system, an online evaluation system and a round support system. Gachon University Gil hospital developed medical service improvement systems to increase work efficiency of medical team and optimized the systems to prove the availability of high-quality medical services for patients and their families. The PHR-based personalized health care solution is under development and will provide higher quality medical service for more patients in the future.

Smart Information System for Gachon University Gil Hospital

PubMed Central

Jung, Eun Young; Jeong, Byung Hui; Moon, Byung Chan; Kang, Hyung Wook; Tchah, Hann; Han, Gi Seong; Cheng, Woo Sung; Lee, Young Ho

2012-01-01

Objectives In this research, the hospital information system of Gachon University Gil hospital is introduced and a future strategy for hospital information systems is proposed. Methods This research introduces the development conditions of hospital information system at Gachon University Gil hospital, information about the development of the enterprise resource planning (ERP), a medical service process improvement system, and the personal health record (PHR) system. Results The medical service process and work efficiency were improved through the medical service process improvement system, which is the most common hospital information system at Gachon University Gil hospital and which includes an emergency medical service system, an online evaluation system and a round support system. Conclusions Gachon University Gil hospital developed medical service improvement systems to increase work efficiency of medical team and optimized the systems to prove the availability of high-quality medical services for patients and their families. The PHR-based personalized health care solution is under development and will provide higher quality medical service for more patients in the future. PMID:22509476

Development of a 3-step straight-through purification strategy combining membrane adsorbers and resins.

PubMed

Hughson, Michael D; Cruz, Thayana A; Carvalho, Rimenys J; Castilho, Leda R

2017-07-01

The pressures to efficiently produce complex biopharmaceuticals at reduced costs are driving the development of novel techniques, such as in downstream processing with straight-through processing (STP). This method involves directly and sequentially purifying a particular target with minimal holding steps. This work developed and compared six different 3-step STP strategies, combining membrane adsorbers, monoliths, and resins, to purify a large, complex, and labile glycoprotein from Chinese hamster ovary cell culture supernatant. The best performing pathway was cation exchange chromatography to hydrophobic interaction chromatography to affinity chromatography with an overall product recovery of up to 88% across the process and significant clearance of DNA and protein impurities. This work establishes a platform and considerations for the development of STP of biopharmaceutical products and highlights its suitability for integration with single-use technologies and continuous production methods. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:931-940, 2017. © 2017 American Institute of Chemical Engineers.

Code Modernization of VPIC

NASA Astrophysics Data System (ADS)

Bird, Robert; Nystrom, David; Albright, Brian

2017-10-01

The ability of scientific simulations to effectively deliver performant computation is increasingly being challenged by successive generations of high-performance computing architectures. Code development to support efficient computation on these modern architectures is both expensive, and highly complex; if it is approached without due care, it may also not be directly transferable between subsequent hardware generations. Previous works have discussed techniques to support the process of adapting a legacy code for modern hardware generations, but despite the breakthroughs in the areas of mini-app development, portable-performance, and cache oblivious algorithms the problem still remains largely unsolved. In this work we demonstrate how a focus on platform agnostic modern code-development can be applied to Particle-in-Cell (PIC) simulations to facilitate effective scientific delivery. This work builds directly on our previous work optimizing VPIC, in which we replaced intrinsic based vectorisation with compile generated auto-vectorization to improve the performance and portability of VPIC. In this work we present the use of a specialized SIMD queue for processing some particle operations, and also preview a GPU capable OpenMP variant of VPIC. Finally we include a lessons learnt. Work performed under the auspices of the U.S. Dept. of Energy by the Los Alamos National Security, LLC Los Alamos National Laboratory under contract DE-AC52-06NA25396 and supported by the LANL LDRD program.

Poling of Microwave Electro-Optic Devices

NASA Technical Reports Server (NTRS)

Singer, Kenneth D.

1997-01-01

The desire to transmit high frequency, microwave RF signals over fiber optic cables has necessitated the need for electro-optic modulation devices. However, in order to reap these potential benefits, it is necessary to develop the devices and their associated fabrication processes, particularly those processes associated with the poling of the devices. To this end, we entered into a cooperative research agreement with Richard Kunath of NASA LeRC. A graduate student in my group, Tony Kowalczyk, worked closely with the group at NASA to develop processes for construction of a microwave frequency electro-optic modulator. Materials were commercially obtained from Amoco Chemical and in collaboration with Lockheed-Martin. The photolithography processes were developed at NASA LeRC and the electric-field poling process was carried out in our laboratory at CWRU. During the grant period, the poling process conditions were investigated for these multilayer devices. Samples were poled and the resulting nonlinear optical properties were evaluated in our laboratory. Following the grant period, Kowalczyk went to NASA under a NRC fellowship, and I continued to collaborate as a consultant. Publications listed at the end of this report came out of this work. Another manuscript is in preparation and will be submitted shortly.

Career Transitions within Organizations: Exploring Connections between Work, Nonwork and Coping Strategies.

ERIC Educational Resources Information Center

Latack, Janina C.

A study examined career transitions within organizations. Developed and evaluated during the study was a model that views career transitions as a stress-coping process influenced by work and non-work factors. Data from organizational records, a questionnaire, and performance ratings were collected for 109 managers and professionals in a…

Making the Past Relevant to Future Generations. The Work of the Anne Frank House in Latin America

ERIC Educational Resources Information Center

Chyrikins, Mariela; Vieyra, Magdalena

2010-01-01

This paper provides the context and outlines the barriers and opportunities for developing promising Holocaust education programmes in Latin America, especially working with diverse communities and societies. In particular, the conflictual history of Latin American and recent democratization processes present opportunities for educational work. It…

Piecing Together Family Social Work in Mainland China

ERIC Educational Resources Information Center

Sim, Timothy

2008-01-01

As rapid economic and sociopolitical development brings about drastic changes in family structure and processes in China, many social concerns arise. Through a review of journal articles published over a period of 28 years (1979-2006) in social work and related disciplines in China, this article presents a glimpse of family social work using the…

Developing Governmentality: Conduct [to the third power] and Education Policy

ERIC Educational Resources Information Center

Gillies, Donald

2008-01-01

This article examines education policy and the policy process in the light of two key concepts. The first is the concept of "governmentality" from the work of Michel Foucault (1991). The second is the concept of "political spectacle" from the work of Murray Edelman (1985, 1988). Taking note, further, of recent work by…

Facilitating Expansive Learning in a Public Sector Organization

ERIC Educational Resources Information Center

Gustavsson, Maria

2009-01-01

The aim of this article is to discuss how learning opportunities can be organized to promote expansive learning in work practice. The discussion draws on results from a case study examining local development work and conditions that facilitate processes of expansive learning in a work team within a public sector organization in a Swedish…

Black-and-white photographic chemistry: A reference

NASA Technical Reports Server (NTRS)

Walker, E. D. (Compiler)

1986-01-01

This work is intended as a reference of black-and-white photographic chemistry. Included is a basic history of the photographic processes and a complete description of all chemicals used, formulas for the development and fixation process, and associated formulas such as cleaners, hardeners, and toners. The work contains a complete glossary of photographic terms, a trouble-shooting section listing causes and effects regarding photographic film and papers, and various conversion charts.

C-C1-04: Building a Health Services Information Technology Research Environment

PubMed Central

Gehrum, David W; Jones, JB; Romania, Gregory J; Young, David L; Lerch, Virginia R; Bruce, Christa A; Donkochik, Diane; Stewart, Walter F

2010-01-01

Background: The electronic health record (EHR) has opened a new era for health services research (HSR) where information technology (IT) is used to re-engineer care processes. While the EHR provides one means of advancing novel solutions, a promising strategy is to develop tools (e.g., online questionnaires, visual display tools, decision support) distinct from, but which interact with, the EHR. Development of such software tools outside the EHR offers an advantage in flexibility, sophistication, and ultimately in portability to other settings. However, institutional IT departments have an imperative to protect patient data and to standardize IT processes to ensure system-level security and support traditional business needs. Such imperatives usually present formidable process barriers to testing novel software solutions. We describe how, in collaboration with our IT department, we are creating an environment and a process that allows for routine and rapid testing of novel software solutions. Methods: We convened a working group consisting of IT and research personnel with expertise in information security, database design/management, web design, EHR programming, and health services research. The working group was tasked with developing a research IT environment to accomplish two objectives: maintain network/ data security and regulatory compliance; allow researchers working with external vendors to rapidly prototype and, in a clinical setting, test web-based tools. Results: Two parallel solutions, one focused on hardware, the second on oversight and management, were developed. First, we concluded that three separate, staged development environments were required to allow external vendor access for testing software and for transitioning software to be used in a clinic. In parallel, the extant oversight process for approving/managing access to internal/external personnel had to be altered to reflect the scope and scale of discrete research projects, as opposed to an enterpriselevel approach to IT management. Conclusions: Innovation in health services software development requires a flexible, scalable IT environment adapted to the unique objectives of a HSR software development model. In our experience, implementing the hardware solution is less challenging than the cultural change required to implement such a model and the modifications to administrative and oversight processes to sustain an environment for rapid product development and testing.

Ceramic Technology Project semiannual progress report, October 1992--March 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, D.R.

1993-09-01

This project was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. Although progress has been made in developing reliable structural ceramics, further work is needed to reduce cost. The work described in this report is organized according to the following work breakdown structure project elements: Materials and processing (monolithics [Si nitride, carbide], ceramic composites, thermal and wear coatings, joining, cost effective ceramic machining), materials design methodology (contact interfaces, new concepts), data base and life prediction (structural qualification, time-dependent behavior, environmental effects, fracture mechanics, nondestructive evaluation development), and technology transfer.

Digital Signal Processing Based Biotelemetry Receivers

NASA Technical Reports Server (NTRS)

Singh, Avtar; Hines, John; Somps, Chris

1997-01-01

This is an attempt to develop a biotelemetry receiver using digital signal processing technology and techniques. The receiver developed in this work is based on recovering signals that have been encoded using either Pulse Position Modulation (PPM) or Pulse Code Modulation (PCM) technique. A prototype has been developed using state-of-the-art digital signal processing technology. A Printed Circuit Board (PCB) is being developed based on the technique and technology described here. This board is intended to be used in the UCSF Fetal Monitoring system developed at NASA. The board is capable of handling a variety of PPM and PCM signals encoding signals such as ECG, temperature, and pressure. A signal processing program has also been developed to analyze the received ECG signal to determine heart rate. This system provides a base for using digital signal processing in biotelemetry receivers and other similar applications.

Ergonomic analysis of work activity for the purpose of developing training programs: the contribution of ergonomics to vocational didactics.

PubMed

Ouellet, Sylvie

2012-01-01

Questions related to job skills and the teaching situations that best promote skill development are investigated by specialists in various fields, notably among them, ergonomists. This paper presents the findings of an ergonomic intervention study whose aim was to develop a meat-deboning training program by taking into account both the training content to be constructed and the working conditions that might facilitate or hinder skill development. One-on-one interviews and group discussions, on-the-job and videotape playback observations, as well as self-confrontation interviews were carried out. Activity analysis revealed major variability in work methods. The reasoning behind the experienced workers' actions and the experiential job knowledge they had developed were brought to light and served to develop the training content. The determining factors in the choice of work methods were identified, allowing adjustments to be made to the working conditions that might hinder skill development. The ergonomic process that implied taking working conditions into account in our study may make a significant contribution to vocational didactics, which is based on the cognitive analysis of work for the purpose of improving the effectiveness of job-skills training.

Development of utility generic functional requirements for electronic work packages and computer-based procedures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oxstrand, Johanna

The Nuclear Electronic Work Packages - Enterprise Requirements (NEWPER) initiative is a step toward a vision of implementing an eWP framework that includes many types of eWPs. This will enable immediate paper-related cost savings in work management and provide a path to future labor efficiency gains through enhanced integration and process improvement in support of the Nuclear Promise (Nuclear Energy Institute 2016). The NEWPER initiative was organized by the Nuclear Information Technology Strategic Leadership (NITSL) group, which is an organization that brings together leaders from the nuclear utility industry and regulatory agencies to address issues involved with information technology usedmore » in nuclear-power utilities. NITSL strives to maintain awareness of industry information technology-related initiatives and events and communicates those events to its membership. NITSL and LWRS Program researchers have been coordinating activities, including joint organization of NEWPER-related meetings and report development. The main goal of the NEWPER initiative was to develop a set of utility generic functional requirements for eWP systems. This set of requirements will support each utility in their process of identifying plant-specific functional and non-functional requirements. The NEWPER initiative has 140 members where the largest group of members consists of 19 commercial U.S. nuclear utilities and eleven of the most prominent vendors of eWP solutions. Through the NEWPER initiative two sets of functional requirements were developed; functional requirements for electronic work packages and functional requirements for computer-based procedures. This paper will describe the development process as well as a summary of the requirements.« less

DHM simulation in virtual environments: a case-study on control room design.

PubMed

Zamberlan, M; Santos, V; Streit, P; Oliveira, J; Cury, R; Negri, T; Pastura, F; Guimarães, C; Cid, G

2012-01-01

This paper will present the workflow developed for the application of serious games in the design of complex cooperative work settings. The project was based on ergonomic studies and development of a control room among participative design process. Our main concerns were the 3D human virtual representation acquired from 3D scanning, human interaction, workspace layout and equipment designed considering ergonomics standards. Using Unity3D platform to design the virtual environment, the virtual human model can be controlled by users on dynamic scenario in order to evaluate the new work settings and simulate work activities. The results obtained showed that this virtual technology can drastically change the design process by improving the level of interaction between final users and, managers and human factors team.

Low cost solar array project production process and equipment task: A Module Experimental Process System Development Unit (MEPSDU)

NASA Technical Reports Server (NTRS)

1981-01-01

Several major modifications were made to the design presented at the PDR. The frame was deleted in favor of a "frameless" design which will provide a substantially improved cell packing factor. Potential shaded cell damage resulting from operation into a short circuit can be eliminated by a change in the cell series/parallel electrical interconnect configuration. The baseline process sequence defined for the MEPSON was refined and equipment design and specification work was completed. SAMICS cost analysis work accelerated, format A's were prepared and computer simulations completed. Design work on the automated cell interconnect station was focused on bond technique selection experiments.

Attitudes and attitude change.

PubMed

Petty, R E; Wegener, D T; Fabrigar, L R

1997-01-01

We review empirical and conceptual developments over the past four years (1992-1995) on attitudes and persuasion. A voluminous amount of material was produced concerning attitude structure, attitude change, and the consequences of holding attitudes. In the structure area, particular attention is paid to work on attitude accessibility, ambivalence, and the affective versus cognitive bases of attitudes. In persuasion, our review examines research that has focused on high effort cognitive processes (central route), low effort processes (peripheral route), and the multiple roles by which variables can have an impact on attitudes. Special emphasis is given to work on cognitive dissonance and other biases in message processing, and on the multiple processes by which mood influences evaluations. Work on the consequences of attitudes focuses on the impact of attitudes on behavior and social judgments.

Adapting the Interpersonal Process Model of Intimacy to Enhance the Co-Leader Relationship during Training

ERIC Educational Resources Information Center

Huffman, David D.; Fernando, Delini M.

2012-01-01

Group work literature acknowledges that the group co-leader relationship influences the development of group members and the group as a whole. However, little direction has been offered for supervisors of group co-leaders to facilitate the development of the co-leader relationship. Reis and Shaver's (1988) interpersonal process model of intimacy…

Low Cost Coherent Doppler Lidar Data Acquisition and Processing

NASA Technical Reports Server (NTRS)

Barnes, Bruce W.; Koch, Grady J.

2003-01-01

The work described in this paper details the development of a low-cost, short-development time data acquisition and processing system for a coherent Doppler lidar. This was done using common laboratory equipment and a small software investment. This system provides near real-time wind profile measurements. Coding flexibility created a very useful test bed for new techniques.

Developing the Scale of Teacher Self-Efficacy in Teaching Process

ERIC Educational Resources Information Center

Korkmaz, Fahrettin; Unsal, Serkan

2016-01-01

The purpose of this study is to develop a reliable and valid measurement tool which will reveal teachers' self-competence in education process. Participants of the study are 300 teachers working at state primary schools in the province of Gaziantep. Results of the exploratory factor analysis administered to the scale in order to determine its…

Summary of Research on the Effectiveness of Math Professional Development Approaches. REL 2014-010

ERIC Educational Resources Information Center

Gersten, Russell; Taylor, Mary Jo; Keys, Tran D.; Rolfhus, Eric; Newman-Gonchar, Rebecca

2014-01-01

This study used a systematic process modeled after the What Works Clearinghouse (WWC) study review process to answer the question: What does the causal research say are effective math professional development interventions for K-12 teachers aimed at improving student achievement? The study identified and screened 910 research studies in a…

Initial English Language Teacher Education: Processes and Tensions towards a Unifying Curriculum in an Argentinian Province

ERIC Educational Resources Information Center

Banegas, Dario Luis

2014-01-01

In this reflective piece I discuss the process of developing a new unifying initial English language teacher education curriculum in the province of Chubut (Argentina). Trainers and trainees from different institutions were called to work on it with the aim of democratising curriculum development and enhancing involvement among agents. In the…

Professional and Creative Development of Natural Geographic Course Teachers within the Process of Professional Retraining

ERIC Educational Resources Information Center

Samigullina, Galina Savelevna; Gilmanchina, Syriya Irekovna; Gaisin, Ilgisar Timergalievich; Gilmanshin, Iskander Rafailevich; Rafailevna, Akchurina Ilsia

2015-01-01

The purpose of this article is to analyse the professional and creative development of natural geographic course teachers of the Republic of Tatarstan in the process of professional retraining. The method for work performing is a retrospective analysis of professional retraining of natural geographic course teachers within the higher professional…

Choosing a Model and Types of Models: How To Find What Works for Your School. Research Brief.

ERIC Educational Resources Information Center

Schwartzbeck, Terri Duggan

It is critical for schools and districts engaged in a comprehensive school-reform process to develop a schoolwide or districtwide strategy, one that affects teaching and learning, governance, and professional development. Researchers studying school-reform processes have noted that different types of models suit different schools differently.…

An Interdisciplinary Approach to Designing Online Learning: Fostering Pre-Service Mathematics Teachers' Capabilities in Mathematical Modelling

ERIC Educational Resources Information Center

Geiger, Vince; Mulligan, Joanne; Date-Huxtable, Liz; Ahlip, Rehez; Jones, D. Heath; May, E. Julian; Rylands, Leanne; Wright, Ian

2018-01-01

In this article we describe and evaluate processes utilized to develop an online learning module on mathematical modelling for pre-service teachers. The module development process involved a range of professionals working within the STEM disciplines including mathematics and science educators, mathematicians, scientists, in-service and pre-service…

It Comes from the People: Community Development and Local Theology.

ERIC Educational Resources Information Center

Hinsdale, Mary Ann; And Others

The closing of local mines and factories collapsed the economic and social structure of Ivanhoe, Virginia, a small rural town once considered a dying community. This book is a case study that tells how the people of Ivanhoe organized to revitalize their town. It documents the community development process--a process that included hard work, a…

Helping Students Develop Learning Strategies: Some Theoretical and Practical Considerations.

ERIC Educational Resources Information Center

Harrison, Ian D.

The collaborative curriculum development process in a postsecondary language education program in Japan is described, looking specifically at the work of five curriculum development teams, or focus groups: needs assessment; curriculum aims, goals, and objectives; cognitive development and learner strategies; materials development; and learner…

Assessment of the Use of Online Comunities to Integrate Educational Processes Development Teams: An Experience in Popular Health Education in Brazil

ERIC Educational Resources Information Center

Barilli, Elomar Castilho; de Freitas Barretto, Stenio; Lima, Carla Moura; Menezes, Marco Antonio

2014-01-01

This paper is intended to share the results of the assessment of the use of the Online Work Community (OWC), developed in the Moodle technology that was used as an instrument to facilitate the educational and operational processes, intended to share problems and proposals for solution among the 470 members of the development teams, made up of…

Development of advanced Czochralski growth process to produce low cost 150 kg silicon ingots from a single crucible for technology readiness

NASA Technical Reports Server (NTRS)

1980-01-01

The design and development of an advanced Czochralski crystal grower are described. Several exhaust gas analysis system equipment specifications studied are discussed. Process control requirements were defined and design work began on the melt temperature, melt level, and continuous diameter control. Sensor development included assembly and testing of a bench prototype of a diameter scanner system.

Strategies for risk assessment and control in welding: challenges for developing countries.

PubMed

Hewitt, P J

2001-06-01

Metal arc welding ranges from primitive (manual) to increasingly complex automated welding processes. Welding occupies 1% of the labour force in some industrialised countries and increasing knowledge of health risks, necessitating improved assessment strategies and controls have been identified by the International Institute of Welding (IIW), ILO, WHO and other authoritative bodies. Challenges for developing countries need to be addressed. For small scale production and repair work, predominantly by manual metal arc on mild steel, the focus in developing economies has correctly been on control of obvious physical and acute health affects. Development introduces more sophisticated processes and hazards. Work pieces of stainless steel and consumables with chromium, nickel and manganese constituents are used with increasingly complex semi-manual or automated systems involving variety of fluxes or gasses. Uncritical adoption of new welding technologies by developing countries potentiates future health problems. Control should be integral at the design stage, otherwise substantive detriments and later costs can ensue. Developing countries need particular guidance on selection of the optimised welding consumables and processes to minimise such detriments. The role of the IIW and the MFRU are described. Applications of occupational hygiene principals of prevention and control of welding fume at source by process modification are presented.

Lev Semenovich Vygotsky (1896-1924): an introduction to the historico-cultural psychology and the development of the higher psychological processes.

PubMed

Derouesné, Christian

2017-09-01

In the 1930's LS Vygotsky developed an original conception of the psychology and the development of the higher psychological processes, which stands up the current theories in Russia and the West. He layed the bases for the study of the higher mental processes and their relationship with the brain functioning, which will be later on developped by AR Luria. After a brief historical notice, this paper will specify the relationships between Vygoski and Marx's and Engels's philosophy, the Soviet power and the works of Freud and Piaget.

Automated Student Aid Processing: The Challenge and Opportunity.

ERIC Educational Resources Information Center

St. John, Edward P.

1985-01-01

To utilize automated technology for student aid processing, it is necessary to work with multi-institutional offices (student aid, admissions, registration, and business) and to develop automated interfaces with external processing systems at state and federal agencies and perhaps at need-analysis organizations and lenders. (MLW)

Development of JSTAMP-Works/NV and HYSTAMP for Multipurpose Multistage Sheet Metal Forming Simulation

NASA Astrophysics Data System (ADS)

Umezu, Yasuyoshi; Watanabe, Yuko; Ma, Ninshu

2005-08-01

Since 1996, Japan Research Institute Limited (JRI) has been providing a sheet metal forming simulation system called JSTAMP-Works packaged the FEM solvers of LS-DYNA and JOH/NIKE, which might be the first multistage system at that time and has been enjoying good reputation among users in Japan. To match the recent needs, "faster, more accurate and easier", of process designers and CAE engineers, a new metal forming simulation system JSTAMP-Works/NV is developed. The JSTAMP-Works/NV packaged the automatic healing function of CAD and had much more new capabilities such as prediction of 3D trimming lines for flanging or hemming, remote control of solver execution for multi-stage forming processes and shape evaluation between FEM and CAD. On the other way, a multi-stage multi-purpose inverse FEM solver HYSTAMP is developed and will be soon put into market, which is approved to be very fast, quite accurate and robust. Lastly, authors will give some application examples of user defined ductile damage subroutine in LS-DYNA for the estimation of material failure and springback in metal forming simulation.

Infant motor and cognitive abilities and subsequent executive function.

PubMed

Wu, Meng; Liang, Xi; Lu, Shan; Wang, Zhengyan

2017-11-01

Although executive function (EF) is widely considered crucial to several aspects of life, the mechanisms underlying EF development remain largely unexplored, especially for infants. From a behavioral or neurodevelopmental perspective, motor and general cognitive abilities are linked with EF. EF development is a multistage process that starts with sensorimotor interactive behaviors, which become basic cognitive abilities and, in turn, mature EF. This study aims to examine how infant motor and general cognitive abilities are linked with their EF at 3 years of age. This work also aims to explore the potential processes of EF development from early movement. A longitudinal study was conducted with 96 infants (55 girls and 41 boys). The infants' motor and general cognitive abilities were assessed at 1 and 2 years of age with Bayley Scales of Infant and Toddler Development, Second and Third Editions, respectively. Infants' EFs were assessed at 3 years of age with Working Memory Span task, Day-Night task, Wrapped Gift task, and modified Gift-in-Bag task. Children with higher scores for cognitive ability at 2 years of age performed better in working memory, and children with higher scores for gross motor ability at 2 years performed better in cognitive inhibitory control (IC). Motor ability at 1 year and fine/gross motor ability at 2 years indirectly affected cognitive IC via general cognitive ability at 2 years and working memory. EF development is a multistage process that originates from physical movement to simple cognitive function, and then to complex cognitive function. Infants and toddlers can undergo targeted motor training to promote EF development. Copyright © 2017 Elsevier Inc. All rights reserved.

A novel computational model to probe visual search deficits during motor performance

PubMed Central

Singh, Tarkeshwar; Fridriksson, Julius; Perry, Christopher M.; Tryon, Sarah C.; Ross, Angela; Fritz, Stacy

2016-01-01

Successful execution of many motor skills relies on well-organized visual search (voluntary eye movements that actively scan the environment for task-relevant information). Although impairments of visual search that result from brain injuries are linked to diminished motor performance, the neural processes that guide visual search within this context remain largely unknown. The first objective of this study was to examine how visual search in healthy adults and stroke survivors is used to guide hand movements during the Trail Making Test (TMT), a neuropsychological task that is a strong predictor of visuomotor and cognitive deficits. Our second objective was to develop a novel computational model to investigate combinatorial interactions between three underlying processes of visual search (spatial planning, working memory, and peripheral visual processing). We predicted that stroke survivors would exhibit deficits in integrating the three underlying processes, resulting in deteriorated overall task performance. We found that normal TMT performance is associated with patterns of visual search that primarily rely on spatial planning and/or working memory (but not peripheral visual processing). Our computational model suggested that abnormal TMT performance following stroke is associated with impairments of visual search that are characterized by deficits integrating spatial planning and working memory. This innovative methodology provides a novel framework for studying how the neural processes underlying visual search interact combinatorially to guide motor performance. NEW & NOTEWORTHY Visual search has traditionally been studied in cognitive and perceptual paradigms, but little is known about how it contributes to visuomotor performance. We have developed a novel computational model to examine how three underlying processes of visual search (spatial planning, working memory, and peripheral visual processing) contribute to visual search during a visuomotor task. We show that deficits integrating spatial planning and working memory underlie abnormal performance in stroke survivors with frontoparietal damage. PMID:27733596

The formation of social reintegration strategies of the psychic suffering carrier: new directions for psychiatric nursing in Brazil.

PubMed

Souza, Emilia Jales Simões de; Moreira, Lilian Hortale de Oliveira; Cardoso, Maria Manuela Vila Nova; Ferreira, Rosa Gomes dos Santos; Silva, Thuany Cristine Santos da

2014-09-01

This is an exploratory and descriptive study of a qualitative nature. Its objective is to analyse the formation of strategies for social reintegration of the psychic suffering carrier in the practice of nurses working in hospital psychiatric institutions. For this study, we use, as a basis, the concepts and processes of the formation of strategies presented by Isabel Nicholau, 2001. Twelve nurses with health care experience in hospital psychiatric institutions participated in this study, and data collection occurred through semi-structured interviews in the year 2013. The data revealed that, in addition to human, material, and financial resources, institutional support is needed as is articulation and interaction among professionals and services. The importance of the social dimension and of the negotiation process depicts the development of conception of collective and integrated work. We conclude that strategies are emerging from the daily life of work and are not limited to a rational logic of cost and fundraising, but instead are developed through a negotiated process.

The economical utilization of geothermal energy

NASA Astrophysics Data System (ADS)

Rose, G.

1982-12-01

The geothermal energy which is stored in hot dry rock could be theoretically utilized for the generation of power. The hot-dry-rock procedure can provide a flow of hot water. The considered binary system can transform the obtained thermal energy into electrical energy. The system makes use of a Rankine cycle with a working fluid having a low boiling point. Heat from the hot water is transferred to the working fluid. The present investigation is concerned with the development of a method for the calculation of the entire process. The results obtained with the computational method are to provide a basis for the determination of the operational characteristics. The development method is used for the study of a process based on the use of carbon dioxide as working fluid. The economics of a use of the hot-dry-rock process with the binary system is also investigated. It is found that the considered procedure is not economical. Economical operation requires, in particular, hot water supplied at a much lower cost.

Thinking differently: working together for better care.

PubMed

Bolton, Patrick; Crilly, Hilary; Rivas, Ketty

2015-06-01

This paper describes the development and outcomes from 'joint working' between Prince of Wales Hospital and BD (Becton, Dickinson and Company) in Australia. 'Joint working' is a term used within the English National Health Service to describe health system and industry partners working together to create novel service models which benefit patients. The joint working process broadened the perspective of both parties through learning from each other and so enhanced the range of tools they each bring to their work.

Establishment of the roadmap for chlorination process development for zirconium recovery and recycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collins, E.D.; Del Cul, G.D.; Spencer, B.B.

Process development studies are being conducted to recover, purify, and reuse the zirconium (about 98.5% by mass) in used nuclear fuel (UNF) zirconium alloy cladding. Feasibility studies began in FY 2010 using empty cladding hulls that were left after fuel dissolution or after oxidation to a finely divided oxide powder (voloxidation). In FY 2012, two industrial teams (AREVA and Shaw-Westinghouse) were contracted by the Department of Energy Office of Nuclear Energy (NE) to provide technical assistance to the project. In FY 2013, the NE Fuel Cycle Research and Development Program requested development of a technology development roadmap to guide futuremore » work. The first step in the roadmap development was to assess the starting point, that is, the current state of the technology and the end goal. Based on previous test results, future work is to be focused on first using chlorine as the chlorinating agent and secondly on the use of a process design that utilizes a chlorination reactor and dual ZrCl{sub 4} product salt condensers. The likely need for a secondary purification step was recognized. Completion of feasibility testing required an experiment on the chemical decladding flowsheet option. This was done during April 2013. The roadmap for process development will continue through process chemistry optimization studies, the chlorinated reactor design configuration, product salt condensers, and the off-gas trapping of tritium or other volatile fission products from the off-gas stream. (authors)« less

Situation awareness acquired from monitoring process plants - the Process Overview concept and measure.

PubMed

Lau, Nathan; Jamieson, Greg A; Skraaning, Gyrd

2016-07-01

We introduce Process Overview, a situation awareness characterisation of the knowledge derived from monitoring process plants. Process Overview is based on observational studies of process control work in the literature. The characterisation is applied to develop a query-based measure called the Process Overview Measure. The goal of the measure is to improve coupling between situation and awareness according to process plant properties and operator cognitive work. A companion article presents the empirical evaluation of the Process Overview Measure in a realistic process control setting. The Process Overview Measure demonstrated sensitivity and validity by revealing significant effects of experimental manipulations that corroborated with other empirical results. The measure also demonstrated adequate inter-rater reliability and practicality for measuring SA based on data collected by process experts. Practitioner Summary: The Process Overview Measure is a query-based measure for assessing operator situation awareness from monitoring process plants in representative settings.

On ways to overcome the magical capacity limit of working memory.

PubMed

Turi, Zsolt; Alekseichuk, Ivan; Paulus, Walter

2018-04-01

The ability to simultaneously process and maintain multiple pieces of information is limited. Over the past 50 years, observational methods have provided a large amount of insight regarding the neural mechanisms that underpin the mental capacity that we refer to as "working memory." More than 20 years ago, a neural coding scheme was proposed for working memory. As a result of technological developments, we can now not only observe but can also influence brain rhythms in humans. Building on these novel developments, we have begun to externally control brain oscillations in order to extend the limits of working memory.

[The aging process and work: a case study in the maintenance engineering division of a public hospital in the city of São Paulo, Brazil].

PubMed

Sato, Andrea Toshye; Barros, Juliana de Oliveira; Jardim, Tatiana de Andrade; Ratier, Ana Paula Pelegrini; Lancman, Selma

2017-11-06

This study aimed to identify and analyze the relations between aging and work. This was a case study in the maintenance engineering division of a high-complexity hospital in the city of São Paulo, Brazil. In September and October 2015, 16 semi-structured interviews were held with the division heads and other workers with a minimum age of 50 years. The data were analyzed with thematic content analysis. Although the workers experienced difficulties resulting from the aging process, these did not prevent them from performing their work activities, since they developed strategies through their knowhow to compensate for their functional losses and/or declines. Still, they felt limited and demotivated due to the poor working conditions, outsourcing of the division, and the prevailing workload organization. Thus, in this division, the working conditions and organization had more impact than the aging process on the individuals' daily work routine.

A Model of Process-Based Automation: Cost and Quality Implications in the Medication Management Process

ERIC Educational Resources Information Center

Spaulding, Trent Joseph

2011-01-01

The objective of this research is to understand how a set of systems, as defined by the business process, creates value. The three studies contained in this work develop the model of process-based automation. The model states that complementarities among systems are specified by handoffs in the business process. The model also provides theory to…

Method of development of the program of forming of parametrical drawings of details in the AutoCAD software product

NASA Astrophysics Data System (ADS)

Alshakova, E. L.

2017-01-01

The program in the AutoLISP language allows automatically to form parametrical drawings during the work in the AutoCAD software product. Students study development of programs on AutoLISP language with the use of the methodical complex containing methodical instructions in which real examples of creation of images and drawings are realized. Methodical instructions contain reference information necessary for the performance of the offered tasks. The method of step-by-step development of the program is the basis for training in programming on AutoLISP language: the program draws elements of the drawing of a detail by means of definitely created function which values of arguments register in that sequence in which AutoCAD gives out inquiries when performing the corresponding command in the editor. The process of the program design is reduced to the process of step-by-step formation of functions and sequence of their calls. The author considers the development of the AutoLISP program for the creation of parametrical drawings of details, the defined design, the user enters the dimensions of elements of details. These programs generate variants of tasks of the graphic works performed in educational process of "Engineering graphics", "Engineering and computer graphics" disciplines. Individual tasks allow to develop at students skills of independent work in reading and creation of drawings, as well as 3D modeling.

The COST Action IC0604 "Telepathology Network in Europe" (EURO-TELEPATH).

PubMed

García-Rojo, Marcial; Gonçalves, Luís; Blobel, Bernd

2012-01-01

The COST Action IC0604 "Telepathology Network in Europe" (EURO-TELEPATH) is a European COST Action that has been running from 2007 to 2011. COST Actions are funded by the COST (European Cooperation in the field of Scientific and Technical Research) Agency, supported by the Seventh Framework Programme for Research and Technological Development (FP7), of the European Union. EURO-TELEPATH's main objectives were evaluating and validating the common technological framework and communication standards required to access, transmit and manage digital medical records by pathologists and other medical professionals in a networked environment. The project was organized in four working groups. orking Group 1 "Business modeling in pathology" has designed main pathology processes - Frozen Study, Formalin Fixed Specimen Study, Telepathology, Cytology, and Autopsy -using Business Process Modeling Notation (BPMN). orking Group 2 "Informatics standards in pathology" has been dedicated to promoting the development and application of informatics standards in pathology, collaborating with Integrating the Healthcare Enterprise (IHE), Digital Imaging and Communications in Medicine (DICOM), Health Level Seven (HL7), and other standardization bodies. Working Group 3 "Images: Analysis, Processing, Retrieval and Management" worked on the use of virtual or digital slides that are fostering the use of image processing and analysis in pathology not only for research purposes, but also in daily practice. Working Group 4 "Technology and Automation in Pathology" was focused on studying the adequacy of current existing technical solutions, including, e.g., the quality of images obtained by slide scanners, or the efficiency of image analysis applications. Major outcome of this action are the collaboration with international health informatics standardization bodies to foster the development of standards for digital pathology, offering a new approach for workflow analysis, based in business process modeling. Health terminology standardization research has become a topic of high interest. Future research work should focus on standardization of automatic image analysis and tissue microarrays imaging.

Automated fiber placement: Evolution and current demonstrations

NASA Technical Reports Server (NTRS)

Grant, Carroll G.; Benson, Vernon M.

1993-01-01

The automated fiber placement process has been in development at Hercules since 1980. Fiber placement is being developed specifically for aircraft and other high performance structural applications. Several major milestones have been achieved during process development. These milestones are discussed in this paper. The automated fiber placement process is currently being demonstrated on the NASA ACT program. All demonstration projects to date have focused on fiber placement of transport aircraft fuselage structures. Hercules has worked closely with Boeing and Douglas on these demonstration projects. This paper gives a description of demonstration projects and results achieved.

The University as a Land Developer.

ERIC Educational Resources Information Center

Fink, Ira

1983-01-01

To assist universities in developing or redeveloping surplus campus or endowment property, these factors in the process are outlined and discussed: development decisions, working with a developer, ground leasing, unrelated taxable income issues, creating a university land management office, some recent experiences, and research and development…

Developing Local Lifelong Guidance Strategies.

ERIC Educational Resources Information Center

Watts, A. G.; Hawthorn, Ruth; Hoffbrand, Jill; Jackson, Heather; Spurling, Andrea

1997-01-01

Outlines the background, rationale, methodology, and outcomes of developing local lifelong guidance strategies in four geographic areas. Analyzes the main components of the strategies developed and addresses a number of issues relating to the process of strategy development. Explores implications for parallel work in other localities. (RJM)

A resource perspective on the work-home interface: the work-home resources model.

PubMed

ten Brummelhuis, Lieke L; Bakker, Arnold B

2012-10-01

The objective of this article is to provide a theoretical framework explaining positive and negative work-home processes integrally. Using insights from conservation of resources theory, we explain how personal resources (e.g., time, energy, and mood) link demanding and resourceful aspects of one domain to outcomes in the other domain. The resulting work-home resources (W-HR) model describes work-home conflict as a process whereby demands in one domain deplete personal resources and impede accomplishments in the other domain. Enrichment is described as a process of resource accumulation: Work and home resources increase personal resources. Those personal resources, in turn, can be utilized to improve home and work outcomes. Moreover, our resource approach to the work-home interface allows us to address two other issues that have thus far lacked a solid theoretical foundation. The W-HR model also explains how conditional factors such as personality and culture may influence the occurrence of work-home conflict and enrichment. Furthermore, the model allows us to examine how work-home conflict and enrichment develop over time. Finally, the model provides useful insights for other psychology subdisciplines, such as gender studies and developmental psychology.

A Scalable, Open Source Platform for Data Processing, Archiving and Dissemination

DTIC Science & Technology

2016-01-01

Object Oriented Data Technology (OODT) big data toolkit developed by NASA and the Work-flow INstance Generation and Selection (WINGS) scientific work...to several challenge big data problems and demonstrated the utility of OODT-WINGS in addressing them. Specific demonstrated analyses address i...source software, Apache, Object Oriented Data Technology, OODT, semantic work-flows, WINGS, big data , work- flow management 16. SECURITY CLASSIFICATION OF

Biochemical Conversion: Using Enzymes, Microbes, and Catalysis to Make Fuels and Chemicals

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2013-07-26

This fact sheet describes the Bioenergy Technologies Office's biochemical conversion work and processes. BETO conducts collaborative research, development, and demonstration projects to improve several processing routes for the conversion of cellulosic biomass.

Lessons Learned from LIBS Calibration Development

NASA Astrophysics Data System (ADS)

Dyar, M. D.; Breves, E. A.; Lepore, K. H.; Boucher, T. F.; Giguere, S.

2016-10-01

More than two decades of work have been dedicated to development of robust standards, data processing, and calibration tools for LIBS. Here we summarize major considerations for improving accuracy of LIBS chemical analyses.

Progress on uncooled PbSe detectors for low-cost applications

NASA Astrophysics Data System (ADS)

Vergara, German; Gomez, Luis J.; Villamayor, Victor; Alvarez, M.; Rodrigo, Maria T.; del Carmen Torquemada, Maria; Sanchez, Fernando J.; Verdu, Marina; Diezhandino, Jorge; Rodriguez, Purificacion; Catalan, Irene; Almazan, Rosa; Plaza, Julio; Montojo, Maria T.

2004-08-01

This work reports on progress on development of polycrystalline PbSe infrared detectors at the Centro de Investigacion y Desarrollo de la Armada (CIDA). Since mid nineties, the CIDA owns an innovative technology for processing uncooled MWIR detectors of polycrystalline PbSe. Based on this technology, some applications have been developed. However, future applications demand smarter, more complex, faster yet cheaper detectors. Aiming to open new perspectives to polycrystalline PbSe detectors, we are currently working on different directions: 1) Processing of 2D arrays: a) Designing and processing low density x-y addressed arrays with 16x16 and 32x32 elements, as an extension of our standard technology. b) Trying to make compatible standard CMOS and polycrystalline PbSe technologies in order to process monolithic large format arrays. 2) Adding new features to the detector such as monolithically integrated spectral discrimination.

Higher Order Chemistry Models in the CFD Simulation of Laser-Ablated Carbon Plumes

NASA Technical Reports Server (NTRS)

Greendyke, R. B.; Creel, J. R.; Payne, B. T.; Scott, C. D.

2005-01-01

Production of single-walled carbon nanotubes (SWNT) has taken place for a number of years and by a variety of methods such as laser ablation, chemical vapor deposition, and arc-jet ablation. Yet, little is actually understood about the exact chemical kinetics and processes that occur in SWNT formation. In recent time, NASA Johnson Space Center has devoted a considerable effort to the experimental evaluation of the laser ablation production process for SWNT originally developed at Rice University. To fully understand the nature of the laser ablation process it is necessary to understand the development of the carbon plume dynamics within the laser ablation oven. The present work is a continuation of previous studies into the efforts to model plume dynamics using computational fluid dynamics (CFD). The ultimate goal of the work is to improve understanding of the laser ablation process, and through that improved understanding, refine the laser ablation production of SWNT.

TRWG developmental pathway for biospecimen-based assessment modalities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Translational Research Working Group; Srivastava, Sudhir; Gray, Joe W.

The Translational Research Working Group (TRWG) was created as a national initiative to evaluate the current status of NCI's investment in translational research and envision its future. The TRWG conceptualized translational research as a set of six developmental processes or pathways focused on various clinical goals. One of those pathways describes the development of biospecimen-based assays that utilize biomarkers for the detection, diagnosis, prognosis, and assessment of response to cancer treatment. The biospecimen-based assessment modality (BM) pathway was conceived not as comprehensive description of the corresponding real-world processes, but rather as a tool designed to facilitate movement of a candidatemore » assay through the translational process to the point where it can be handed off for definitive clinical testing. This paper introduces the pathway in the context of prior work and discusses key challenges associated with the biomarker development process in light of the pathway.« less

The Role and Reprocessing of Attitudes in Fostering Employee Work Happiness: An Intervention Study.

PubMed

Williams, Paige; Kern, Margaret L; Waters, Lea

2017-01-01

This intervention study examines the iterative reprocessing of explicit and implicit attitudes as the process underlying associations between positive employee attitudes (PsyCap), perception of positive organization culture (organizational virtuousness, OV), and work happiness. Using a quasi-experimental design, a group of school staff ( N = 69) completed surveys at three time points. After the first assessment, the treatment group ( n = 51) completed a positive psychology training intervention. Results suggest that employee PsyCap, OV, and work happiness are associated with one another through both implicit and explicit attitudes. Further, the Iterative-Reprocessing Model of attitudes (IRM) provides some insights into the processes underlying these associations. By examining the role and processes through which explicit and implicit attitudes relate to wellbeing at work, the study integrates theories on attitudes, positive organizational scholarship, positive organizational behavior and positive education. It is one of the first studies to apply the theory of the IRM to explain associations amongst PsyCap, OV and work happiness, and to test the IRM theory in a field-based setting. In applying attitude theory to wellbeing research, this study provides insights to mechanisms underlying workplace wellbeing that have not been previously examined and in doing so responds to calls for researchers to learn more about the mechanisms underlying wellbeing interventions. Further, it highlights the need to understand subconscious processes in future wellbeing research and to include implicit measures in positive psychology interventions measurement programs. Practically, this research calls attention to the importance of developing both the positive attitudes of employees and the organizational culture in developing employee work happiness.

The Role and Reprocessing of Attitudes in Fostering Employee Work Happiness: An Intervention Study

PubMed Central

Williams, Paige; Kern, Margaret L.; Waters, Lea

2017-01-01

This intervention study examines the iterative reprocessing of explicit and implicit attitudes as the process underlying associations between positive employee attitudes (PsyCap), perception of positive organization culture (organizational virtuousness, OV), and work happiness. Using a quasi-experimental design, a group of school staff (N = 69) completed surveys at three time points. After the first assessment, the treatment group (n = 51) completed a positive psychology training intervention. Results suggest that employee PsyCap, OV, and work happiness are associated with one another through both implicit and explicit attitudes. Further, the Iterative-Reprocessing Model of attitudes (IRM) provides some insights into the processes underlying these associations. By examining the role and processes through which explicit and implicit attitudes relate to wellbeing at work, the study integrates theories on attitudes, positive organizational scholarship, positive organizational behavior and positive education. It is one of the first studies to apply the theory of the IRM to explain associations amongst PsyCap, OV and work happiness, and to test the IRM theory in a field-based setting. In applying attitude theory to wellbeing research, this study provides insights to mechanisms underlying workplace wellbeing that have not been previously examined and in doing so responds to calls for researchers to learn more about the mechanisms underlying wellbeing interventions. Further, it highlights the need to understand subconscious processes in future wellbeing research and to include implicit measures in positive psychology interventions measurement programs. Practically, this research calls attention to the importance of developing both the positive attitudes of employees and the organizational culture in developing employee work happiness. PMID:28154546

Management of processes of electrochemical dimensional processing

NASA Astrophysics Data System (ADS)

Akhmetov, I. D.; Zakirova, A. R.; Sadykov, Z. B.

2017-09-01

In different industries a lot high-precision parts are produced from hard-processed scarce materials. Forming such details can only be acting during non-contact processing, or a minimum of effort, and doable by the use, for example, of electro-chemical processing. At the present stage of development of metal working processes are important management issues electrochemical machining and its automation. This article provides some indicators and factors of electrochemical machining process.

Improving performance on core processes of care.

PubMed

Austin, John Matthew; Pronovost, Peter J

2016-06-01

This article describes the recent literature on using extrinsic and intrinsic motivators to improve performance on core processes of care, highlighting literature that describes general frameworks for quality improvement work. The literature supporting the effectiveness of extrinsic motivators to improve quality is generally positive for public reporting of performance, with mixed results for pay-for-performance. A four-element quality improvement framework developed by The Armstrong Institute at Johns Hopkins Medicine was developed with intrinsic motivation in mind. The clear definition and communication of goals are important for quality improvement work. Training clinicians in improvement science, such as lean sigma, teamwork, or culture change provides clinicians with the skills they need to drive the improvement work. Peer learning communities offer the opportunity for clinicians to engage with each other and offer support in their work. The transparent reporting of performance helps ensure accountability of performance ranging from individual clinicians to governance. Quality improvement work that is led by and engages clinicians offers the opportunity for the work to be both meaningful and sustainable. The literature supports approaching quality improvement work in a systematic way, including the key elements of communication, infrastructure building, training, transparency, and accountability.

Collaborative Measurement Development as a Tool in CBPR: Measurement Development and Adaptation within the Cultures of Communities

PubMed Central

Gonzalez, John; Trickett, Edison J.

2014-01-01

This paper describes the processes we engaged in to develop a measurement protocol used to assess the outcomes in a community based suicide and alcohol abuse prevention project with two Alaska Native communities. While the literature on community-based participatory research (CBPR) is substantial regarding the importance of collaborations, few studies have reported on this collaboration in the process of developing measures to assess CBPR projects. We first tell a story of the processes around the standard issues of doing cross-cultural work on measurement development related to areas of equivalence. A second story is provided that highlights how community differences within the same cultural group can affect both the process and content of culturally relevant measurement selection, adaptation, and development. PMID:24748283

Collaborative measurement development as a tool in CBPR: measurement development and adaptation within the cultures of communities.

PubMed

Gonzalez, John; Trickett, Edison J

2014-09-01

This paper describes the processes we engaged into develop a measurement protocol used to assess the outcomes in a community based suicide and alcohol abuse prevention project with two Alaska Native communities. While the literature on community-based participatory research (CBPR) is substantial regarding the importance of collaborations, few studies have reported on this collaboration in the process of developing measures to assess CBPR projects. We first tell a story of the processes around the standard issues of doing cross-cultural work on measurement development related to areas of equivalence. A second story is provided that highlights how community differences within the same cultural group can affect both the process and content of culturally relevant measurement selection, adaptation, and development.

Computers in Public Schools: Changing the Image with Image Processing.

ERIC Educational Resources Information Center

Raphael, Jacqueline; Greenberg, Richard

1995-01-01

The kinds of educational technologies selected can make the difference between uninspired, rote computer use and challenging learning experiences. University of Arizona's Image Processing for Teaching Project has worked with over 1,000 teachers to develop image-processing techniques that provide students with exciting, open-ended opportunities for…

Neuropsychological Components of Imagery Processing, Final Technical Report.

ERIC Educational Resources Information Center

Kosslyn, Stephen M.

High-level visual processes make use of stored information, and are invoked during object identification, navigation, tracking, and visual mental imagery. The work presented in this document has resulted in a theory of the component "processing subsystems" used in high-level vision. This theory was developed by considering…

Self and Peer Assessment of Mathematical Processes

ERIC Educational Resources Information Center

Onion, Alice; Javaheri, Elnaz

2011-01-01

This article explores using Bowland assessment tasks and Nuffield Applying Mathematical Processes (AMP) activities as part of a scheme of work. The Bowland tasks and Nuffield AMP activities are designed to develop students' mathematical thinking; they are focused on key processes. Unfamiliar demands are made on the students and they are challenged…

Vygotsky's Analysis of Children's Meaning Making Processes

ERIC Educational Resources Information Center

Mahn, Holbrook

2012-01-01

Vygotsky's work is extensive and covers many aspects of the development of children's meaning-making processes in social and cultural contexts. However, his main focus is on the examination of the unification of speaking and thinking processes. His investigation centers on the analysis of the entity created by this unification--an internal…

Developmental Implications of the Levels of Processing Memory Framework.

ERIC Educational Resources Information Center

Naus, Mary J.

The levels of processing framework for understanding memory development has generated little empirical or theoretical work that furthers an understanding of the developmental memory system. Although empirical studies by those testing the levels of processing framework have demonstrated that mnemonic strategies employed by children are the critical…

Recent advances in the deformation processing of titanium alloys

NASA Astrophysics Data System (ADS)

Tamirisakandala, S.; Bhat, R. B.; Vedam, B. V.

2003-12-01

Titanium (Ti) alloys are special-purpose materials used for several critical applications in aerospace as well as non-aerospace industries, and extensive deformation processing is necessary to shape-form these materials, which poses many challenges due to the microstructural complexities. Some of the recent developments in the deformation processing of Ti alloys and usefulness of integrating the material behavior information with simulation schemes while designing and optimizing manufacturing process schedules are discussed in this paper. Discussions are primarily focused on the most important alloy, Ti-6Al-4V and on developing a clear understanding on the influence of key parameters (e.g., oxygen content, starting microstructure, temperature, and strain rate) on the deformation behavior during hot working. These studies are very useful not only for obtaining controlled microstructures but also to design complex multi-step processing sequences to produce defect-free components. Strain-induced porosity (SIP) has been a serious problem during titanium alloy processing, and improved scientific understanding helps in seeking elegant solutions to avoid SIP. A novel high-speed processing technique for microstructural conversion in titanium has been described, which provides several benefits over the conventional slow-speed practices. The hot working behavior of some of the affordable α+β and β titanium alloys being developed recently—namely, Ti-5.5Al-1Fe, Ti-10V-2Fe-3Al, Ti-6.8Mo-4.5Fe-1.5Al, and Ti-10V-4.5Fe-1.5Al—has been analyzed, and the usefulness of the processing maps in optimizing the process parameters and design of hot working schedules in these alloys is demonstrated. Titanium alloys modified with small additions of boron are emerging as potential candidates for replacing structural components requiring high specific strength and stiffness. Efforts to understand the microstructural mechanisms during deformation processing of Ti-B alloys and the issues associated with their processing are discussed.

[Subtainable health promotion via organisational development--a model project for teachers in professional training schools].

PubMed

Schumacher, L; Nieskens, B; Bräuer, H; Sieland, B

2005-02-01

The goal of this project is the development, implementation and evaluation of a concept designed for sustainable health promotion among occupational and trade school teachers. We assume that for sustainable health promotion -- along with a behavioral prevention program -- a change is necessary in the structure, as well as, the working and communication processes within schools. The realization of early teacher participation and self regulated cooperative groups initiates comprehensive and goal-oriented developmental processes in the project schools. The organizational development process was accomplished in the following way: At the beginning we conducted a diagnosis of school-specific and individual health risks and the resources available to the project schools. The results were reported for both the individual and for the teacher group. This was intended to clarify the potential for improvement and, thus, strengthen the teachers' motivation toward processes of change. Following the diagnosis, the teachers chose areas of stress-related strain and then worked in groups to develop and implement behaviour and working condition-oriented intervention strategies for health promotion. The diagnosis results confirm the necessity of school-specific health promotion: the schools demonstrate very different demand and resource profiles. Furthermore, is has become evident that the central success factor for health promotion in schools is the teachers' willingness for change. The individual and group reports of the diagnosis results seem to have made clear how essential individual and organisational changes are.

Iterative development of visual control systems in a research vivarium.

PubMed

Bassuk, James A; Washington, Ida M

2014-01-01

The goal of this study was to test the hypothesis that reintroduction of Continuous Performance Improvement (CPI) methodology, a lean approach to management at Seattle Children's (Hospital, Research Institute, Foundation), would facilitate engagement of vivarium employees in the development and sustainment of a daily management system and a work-in-process board. Such engagement was implemented through reintroduction of aspects of the Toyota Production System. Iterations of a Work-In-Process Board were generated using Shewhart's Plan-Do-Check-Act process improvement cycle. Specific attention was given to the importance of detecting and preventing errors through assessment of the following 5 levels of quality: Level 1, customer inspects; Level 2, company inspects; Level 3, work unit inspects; Level 4, self-inspection; Level 5, mistake proofing. A functioning iteration of a Mouse Cage Work-In-Process Board was eventually established using electronic data entry, an improvement that increased the quality level from 1 to 3 while reducing wasteful steps, handoffs and queues. A visual workplace was realized via a daily management system that included a Work-In-Process Board, a problem solving board and two Heijunka boards. One Heijunka board tracked cage changing as a function of a biological kanban, which was validated via ammonia levels. A 17% reduction in cage changing frequency provided vivarium staff with additional time to support Institute researchers in their mutual goal of advancing cures for pediatric diseases. Cage washing metrics demonstrated an improvement in the flow continuum in which a traditional batch and queue push system was replaced with a supermarket-type pull system. Staff engagement during the improvement process was challenging and is discussed. The collective data indicate that the hypothesis was found to be true. The reintroduction of CPI into daily work in the vivarium is consistent with the 4P Model of the Toyota Way and selected Principles that guide implementation of the Toyota Production System.

Iterative Development of Visual Control Systems in a Research Vivarium

PubMed Central

Bassuk, James A.; Washington, Ida M.

2014-01-01

The goal of this study was to test the hypothesis that reintroduction of Continuous Performance Improvement (CPI) methodology, a lean approach to management at Seattle Children’s (Hospital, Research Institute, Foundation), would facilitate engagement of vivarium employees in the development and sustainment of a daily management system and a work-in-process board. Such engagement was implemented through reintroduction of aspects of the Toyota Production System. Iterations of a Work-In-Process Board were generated using Shewhart’s Plan-Do-Check-Act process improvement cycle. Specific attention was given to the importance of detecting and preventing errors through assessment of the following 5 levels of quality: Level 1, customer inspects; Level 2, company inspects; Level 3, work unit inspects; Level 4, self-inspection; Level 5, mistake proofing. A functioning iteration of a Mouse Cage Work-In-Process Board was eventually established using electronic data entry, an improvement that increased the quality level from 1 to 3 while reducing wasteful steps, handoffs and queues. A visual workplace was realized via a daily management system that included a Work-In-Process Board, a problem solving board and two Heijunka boards. One Heijunka board tracked cage changing as a function of a biological kanban, which was validated via ammonia levels. A 17% reduction in cage changing frequency provided vivarium staff with additional time to support Institute researchers in their mutual goal of advancing cures for pediatric diseases. Cage washing metrics demonstrated an improvement in the flow continuum in which a traditional batch and queue push system was replaced with a supermarket-type pull system. Staff engagement during the improvement process was challenging and is discussed. The collective data indicate that the hypothesis was found to be true. The reintroduction of CPI into daily work in the vivarium is consistent with the 4P Model of the Toyota Way and selected Principles that guide implementation of the Toyota Production System. PMID:24736460

Experiences of the return to work process after stroke while participating in a person-centred rehabilitation programme.

PubMed

Öst Nilsson, Annika; Eriksson, Gunilla; Johansson, Ulla; Hellman, Therese

2017-09-01

In Sweden, less than 50% of those getting stroke in working age return to work (RTW). Effective rehabilitation programmes need to be developed and therapeutic aspects understood. To explore and describe how persons with stroke experience their RTW process while participating in a person-centred rehabilitation programme focusing on RTW. Seven persons with mild or moderate stroke were interviewed twice during the intervention in the vocational training phase using semi-structured interviews. Data were analysed using grounded theory. Having a coordinator by their side gave support and guidance during the RTW process. Knowledge of stroke, strategies and a straightforward communication created a structure for the RTW process. Expressing one's own wishes increased opportunities to influence and decide which path to follow in order to reach the goal. Straightforward, open and recurring communication facilitated the possibility to adapt to the situation. These aspects increased insight and awareness which facilitated the RTW process. The findings indicate that a precondition for a fruitful RTW process was that suitable platforms at work were created in which the actors involved could cooperate. This knowledge might also be valuable in the RTW process for people with other diagnosis.

EVALUATION OF ALTERNATIVE STRONIUM AND TRANSURANIC SEPARATION PROCESSES

DOE Office of Scientific and Technical Information (OSTI.GOV)

SMALLEY CS

2011-04-25

In order to meet contract requirements on the concentrations of strontium-90 and transuranic isotopes in the immobilized low-activity waste, strontium-90 and transuranics must be removed from the supernate of tanks 241-AN-102 and 241-AN-107. The process currently proposed for this application is an in-tank precipitation process using strontium nitrate and sodium permanganate. Development work on the process has not proceeded since 2005. The purpose of the evaluation is to identify whether any promising alternative processes have been developed since this issue was last examined, evaluate the alternatives and the baseline process, and recommend which process should be carried forward.

The Role of the Company in Generating Skills. The Learning Effects of Work Organization in the United Kingdom.

ERIC Educational Resources Information Center

Walsh, Kenneth; Green, Andy; Steedman, Hilary

The impact of developments in work organizations on the skilling process in the United Kingdom was studied through a macro analysis of available statistical information about the development of workplace training in the United Kingdom and case studies of three U.K. firms. The macro analysis focused on the following: initial training arrangements;…

But I Don't Want to Be a Professor! The Innovations of an Online Practitioner Doctorate Focused on Educational Technology Leadership

ERIC Educational Resources Information Center

Miller, Christopher T.; Curry, John H.

2014-01-01

There is growing potential for the development of practitioner-based doctor of education (EdD) programs as potential students in the field recognize that they do not need to leave their current work positions to obtain a doctorate particularly if it enhances their work. This article chronicles 1 university's process in developing an innovative…

The TV Development Concept Papers. Preliminary Working Draft. Occasional Papers, Vol. 1, No. 4.

ERIC Educational Resources Information Center

To Educate the People Consortium, Detroit, MI.

This working paper is an intermediary stage in the development of a new telecurriculum for the To Educate the People Consortium. Section 1 is an introduction to the process. Section 2 contains the outlines of 18 courses in the telecurriculum based on concept papers submitted by teams from the consortium. Each course is in the format of six 1-hour…

An Extensible Information Grid for Risk Management

NASA Technical Reports Server (NTRS)

Maluf, David A.; Bell, David G.

2003-01-01

This paper describes recent work on developing an extensible information grid for risk management at NASA - a RISK INFORMATION GRID. This grid is being developed by integrating information grid technology with risk management processes for a variety of risk related applications. To date, RISK GRID applications are being developed for three main NASA processes: risk management - a closed-loop iterative process for explicit risk management, program/project management - a proactive process that includes risk management, and mishap management - a feedback loop for learning from historical risks that escaped other processes. This is enabled through an architecture involving an extensible database, structuring information with XML, schemaless mapping of XML, and secure server-mediated communication using standard protocols.

Students' Ability to Solve Process-Diagram Problems in Secondary Biology Education

ERIC Educational Resources Information Center

Kragten, Marco; Admiraal, Wilfried; Rijlaarsdam, Gert

2015-01-01

Process diagrams are important tools in biology for explaining processes such as protein synthesis, compound cycles and the like. The aim of the present study was to measure the ability to solve process-diagram problems in biology and its relationship with prior knowledge, spatial ability and working memory. For this purpose, we developed a test…

Final Report. Baseline LAW Glass Formulation Testing, VSL-03R3460-1, Rev. 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muller, Isabelle S.; Pegg, Ian L.; Gan, Hao

2015-06-18

The major objective of the baseline glass formulation work was to develop and select glass formulations that are compliant with contractual and processing requirements for each of the LAW waste streams. Other objectives of the work included preparation and characterization of glasses with respect to the properties of interest, optimization of sulfate loading in the glasses, evaluation of ability to achieve waste loading limits, testing to demonstrate compatibility of glass melts with melter materials of construction, development of glass formulations to support ILAW qualification activities, and identification of glass formulation issues with respect to contract specifications and processing requirements.

Expert System for ASIC Imaging

NASA Astrophysics Data System (ADS)

Gupta, Shri N.; Arshak, Khalil I.; McDonnell, Pearse; Boyce, Conor; Duggan, Andrew

1989-07-01

With the developments in the techniques of artificial intelligence over the last few years, development of advisory, scheduling and similar class of problems has become very convenient using tools such as PROLOG. In this paper an expert system has been described which helps lithographers and process engineers in several ways. The methodology used is to model each work station according to its input, output and control parameters, combine these work stations in a logical sequence based on past experience and work out process schedule for a job. In addition, all the requirements vis-a-vis a particular job parameters are converted into decision rules. One example is the exposure time, develop time for a wafer with different feature sizes would be different. This expert system has been written in Turbo Prolog. By building up a large number of rules, one can tune the program to any facility and use it for as diverse applications as advisory help, trouble shooting etc. Leitner (1) has described an advisory expert system that is being used at National Semiconductor. This system is quite different from the one being reported in the present paper. The approach is quite different for one. There is stress on job flow and process for another.

Biofuels from food processing wastes.

PubMed

Zhang, Zhanying; O'Hara, Ian M; Mundree, Sagadevan; Gao, Baoyu; Ball, Andrew S; Zhu, Nanwen; Bai, Zhihui; Jin, Bo

2016-04-01

Food processing industry generates substantial high organic wastes along with high energy uses. The recovery of food processing wastes as renewable energy sources represents a sustainable option for the substitution of fossil energy, contributing to the transition of food sector towards a low-carbon economy. This article reviews the latest research progress on biofuel production using food processing wastes. While extensive work on laboratory and pilot-scale biosystems for energy production has been reported, this work presents a review of advances in metabolic pathways, key technical issues and bioengineering outcomes in biofuel production from food processing wastes. Research challenges and further prospects associated with the knowledge advances and technology development of biofuel production are discussed. Copyright © 2016. Published by Elsevier Ltd.

Expedited vocational assessment under the sequential evaluation process. Final rules.

PubMed

2012-07-25

We are revising our rules to give adjudicators the discretion to proceed to the fifth step of the sequential evaluation process for assessing disability when we have insufficient information about a claimant's past relevant work history to make the findings required for step 4. If an adjudicator finds at step 5 that a claimant may be unable to adjust to other work existing in the national economy, the adjudicator will return to the fourth step to develop the claimant's work history and make a finding about whether the claimant can perform his or her past relevant work. We expect that this new expedited process will not disadvantage any claimant or change the ultimate conclusion about whether a claimant is disabled, but it will promote administrative efficiency and help us make more timely disability determinations and decisions.

Arithmetic strategy development and its domain-specific and domain-general cognitive correlates: a longitudinal study in children with persistent mathematical learning difficulties.

PubMed

Vanbinst, Kiran; Ghesquière, Pol; De Smedt, Bert

2014-11-01

Deficits in arithmetic fact retrieval constitute the hallmark of children with mathematical learning difficulties (MLD). It remains, however, unclear which cognitive deficits underpin these difficulties in arithmetic fact retrieval. Many prior studies defined MLD by considering low achievement criteria and not by additionally taking the persistence of the MLD into account. Therefore, the present longitudinal study contrasted children with persistent MLD (MLD-p; mean age: 9 years 2 months) and typically developing (TD) children (mean age: 9 years 6 months) at three time points, to explore whether differences in arithmetic strategy development were associated with differences in numerical magnitude processing, working memory and phonological processing. Our longitudinal data revealed that children with MLD-p had persistent arithmetic fact retrieval deficits at each time point. Children with MLD-p showed persistent impairments in symbolic, but not in nonsymbolic, magnitude processing at each time point. The two groups differed in phonological processing, but not in working memory. Our data indicate that both domain-specific and domain-general cognitive abilities contribute to individual differences in children's arithmetic strategy development, and that the symbolic processing of numerical magnitudes might be a particular risk factor for children with MLD-p. Copyright © 2014 Elsevier Ltd. All rights reserved.

Center Planning and Development Student Engineer at KSC

NASA Technical Reports Server (NTRS)

Jenkins, Kenneth T., Jr.

2015-01-01

This summer I was the Student Trainee (Engineering) Pathways Intern (co-op) at the Kennedy Space Center (KSC) in the Center Planning & Development (CPD) Directorate. CPD works with commercial companies who are interested in using KSC's unique capabilities for spaceflight, spacecraft processing, ground systems and Research & Development (R&D) projects that fall in line with NASA's Mission and Vision. CPD is divided into three (3) groups: (1) AD-A, which works on the Master Planning for the center, (2) AD-B (where I am), which works on project control, management and integration, and (3) AD-C, which works on partnership development. CPD's main goal is to make KSC the world's preeminent multi-user spaceport and maintain the center as a leader in space exploration. CPD is a very diverse group of employees having a wide knowledge of not only the Space Shuttle, but also Expendable Launch Vehicles (ELV). The director of CPD, Scott Colloredo, is on the advisory board for Commercial Space Operations (CSO) and has a degree from ERAU. I worked on a number of different tasks for AD-B, as well as CPD, that includes, but not limited to: reviewing and reissuing engineering documents, weekly notes for CPD and senior management, engineering familiarizations with facilities at KSC, leading a tour for the Embry-Riddle Aeronautical University Career Services office, and working on actual agreements/proposals that will be used in the partnership process with multiple partners, along with other projects. Most of the work I have done is sensitive information and cannot be disclosed.

Process-based Cost Estimation for Ramjet/Scramjet Engines

NASA Technical Reports Server (NTRS)

Singh, Brijendra; Torres, Felix; Nesman, Miles; Reynolds, John

2003-01-01

Process-based cost estimation plays a key role in effecting cultural change that integrates distributed science, technology and engineering teams to rapidly create innovative and affordable products. Working together, NASA Glenn Research Center and Boeing Canoga Park have developed a methodology of process-based cost estimation bridging the methodologies of high-level parametric models and detailed bottoms-up estimation. The NASA GRC/Boeing CP process-based cost model provides a probabilistic structure of layered cost drivers. High-level inputs characterize mission requirements, system performance, and relevant economic factors. Design alternatives are extracted from a standard, product-specific work breakdown structure to pre-load lower-level cost driver inputs and generate the cost-risk analysis. As product design progresses and matures the lower level more detailed cost drivers can be re-accessed and the projected variation of input values narrowed, thereby generating a progressively more accurate estimate of cost-risk. Incorporated into the process-based cost model are techniques for decision analysis, specifically, the analytic hierarchy process (AHP) and functional utility analysis. Design alternatives may then be evaluated not just on cost-risk, but also user defined performance and schedule criteria. This implementation of full-trade study support contributes significantly to the realization of the integrated development environment. The process-based cost estimation model generates development and manufacturing cost estimates. The development team plans to expand the manufacturing process base from approximately 80 manufacturing processes to over 250 processes. Operation and support cost modeling is also envisioned. Process-based estimation considers the materials, resources, and processes in establishing cost-risk and rather depending on weight as an input, actually estimates weight along with cost and schedule.

Contributions to the initial development of a microelectromechanical loop heat pipe, which is based on coherent porous silicon

NASA Astrophysics Data System (ADS)

Cytrynowicz, Debra G.

The research project itself was the initiation of the development of a planar miniature loop heat pipe based on a capillary wick structure made of coherent porous silicon. Work on this project fell into four main categories, which were component fabrication, test system construction, characterization testing and test data collection, performance analysis and thermal modeling. Component fabrication involved the production of various components for the evaporator. When applicable, these components were to be produced by microelectronic and MEMS or microelectromechanical fabrication techniques. Required work involved analyses and, where necessary, modifications to the wafer processing sequence, the photo-electrochemical etching process, system and controlling computer program to make it more reliable, flexible and efficient. The development of more than one wick production process was also extremely necessary in the event of equipment failure. Work on developing this alternative also involved investigations into various details of the photo-electrochemical etching process itself. Test system construction involved the actual assembly of open and closed loop test systems. Characterization involved developing and administering a series of tests to evaluate the performance of the wicks and test systems. Although there were some indications that the devices were operating according to loop heat pipe theory, they were transient and unstable. Performance analysis involved the construction of a transparent evaporator, which enabled the visual observation of the phenomena, which occurred in the evaporator during operation. It also involved investigating the effect of the quartz wool secondary wick on the operation of the device. Observations made during the visualization study indicated that the capillary and boiling limits were being reached at extremely low values of input power. The work was performed in a collaborative effort between the Biomedical Nanotechnology Research Laboratory at the University of Toledo, the Center for Microelectronics and Sensors and MEMS at the University of Cincinnati and the Thermo-Mechanical Systems Branch of the Power and On-Board Propulsion Division at the John H. Glenn Research Center of the National Aeronautics and Space Administration in Cleveland, Ohio. Work on the project produced six publications, which presented various details on component fabrication, tests system construction and characterization and thermal modeling.

Organizational ergonomics of occupational health methods and processes in a Brazilian oil refinery.

PubMed

Bau, Lucy M S; Farias, Jean P; Buso, Sandro A; Passero, Carolina R Marcon

2012-01-01

Organizational ergonomics refers to the optimization of social technical systems, including their organizational structures, policies and processes. The relevant topics include communications, management of resources, work projects, temporal organization of work, team work, participative project, new work paradigms, cooperative work, organizational culture, network organizations and quality management (IEA, 2000). The purpose of this study was the reorganization of the methods and processes of the occupational health sector (SMS/SO - Portuguese acronym of the area) of a petrochemical company. The work involved thirty professionals: a coordinator, two occupational physicians, one cardiologist, one occupational dentist, two occupational nurses, eleven occupational health technicians, one social worker, one nutritionist, one phonoaudiologist, one ophthalmologist, one biochemist, two ergonomists, three administrative assistants, one administrator and one psychologist, during a six-month period. The methodology that was used sought to establish a cooperative alliance focused on change, transformation and acquisition of skills, reflecting directly on the attitudes and performance of the leaderships and their work teams. In addition to the feedback practice, the following supporting tools were used for the study's success: "Functional Polyvalence Matrix", "Management of Failures", 5W2H", "6M", "5 Why" and "process mapping". The intended results after the organization ergonomics restructuring process will allow the leader to help his or her team to make a diagnosis of the problems, identify options, develop strategies, establish targets and action plans, remove barriers, review contexts and implement the business management fundaments: planning, organization, management, coordination and control. The transformation possibilities allow us to consider some hypothesis: Before: Focus only on results. After: Engage collaborators to create sustainable results. Before: Operating profile. After: Tactical/strategic profile. Before: Find errors. After: Value effort and development. Before: Listen to what is being said. After: Understand what is being said. Before: Create fears of the consequences. After: Create room for risk. Before: Be the one who approves and decides. After: Be the cooperative support.

Negotiating Time, Meaning and Identity in Boundaryless Work

ERIC Educational Resources Information Center

Kamp, Annette; Lund, Henrik Lambrecht; Hvid, Helge Sondergaard

2011-01-01

Purpose: Focus on the qualities and rhythms of time are important in order to understand strain and learning opportunities in modern working life. This article aims to develop a framework for exploring the qualities of time in boundaryless work, and to explore self-management of time as a process, where the relations between time and tasks are…

Working to Make It Work: The Role of Parents in the Youth Mentoring Process

ERIC Educational Resources Information Center

Spencer, Renee; Basualdo-Delmonico, Antoinette; Lewis, Terrence O.

2011-01-01

Theoretical and empirical work on youth mentoring relationships has been largely focused on the mentor-youth dyad, with little attention to the larger context within which such relationships form and develop. The perspectives of parents have been absent for the most part from the mentoring literature to date. In-depth, semistructured, qualitative…

Senior Managers' and Recent Graduates' Perceptions of Employability Skills for Health Services Management

ERIC Educational Resources Information Center

Messum, Diana; Wilkes, Lesly; Peters, Cath; Jackson, Debra

2017-01-01

If work-integrated learning (WIL) is intended by universities to meet the demand for work-ready graduates, identification of skill requirements for development on placements is a critical part of the learning process. Health services management specific employability skills perceived to be important by managers and recent graduates working in the…

The Importance and Benefits of Supervision in Youth Work Practice

ERIC Educational Resources Information Center

Jenkinson, Hilary

2009-01-01

This article explores the concept of supervision and its implementation within a youth work context. The article describes and explores a process of staff development facilitated by the author which involved providing supervision training to a group of youth work practitioners at Cork YMCA in Ireland and continuing to meet them on a monthly basis…

Work-Integrated Learning Courses: An Essential Component for Preparing Students to Work in Statutory Child Protection?

ERIC Educational Resources Information Center

Bates, Annerly; Bates, Lyndel

2013-01-01

Undergraduate programs can play an important role in the development of individuals wanting professional employment within statutory child protection agencies: both the coursework and the work-integrated learning (WIL) components of degrees have a role in this process. This paper uses a collective case study methodology to examine the perceptions…

Building Social Capital among Social Work Educators: A Strategy for Curriculum Development

ERIC Educational Resources Information Center

Sugawara, Carmen G. Luca

2009-01-01

This article explores the role of human relations in the process of curriculum change in social work education. Social capital, the theoretical framework that underpins this research, explains how social resources are made available to social work faculty and groups for their own benefit. Using data from 88 surveys completed by social work…

Native People and the Social Work Profession: A Critical Exploration of Colonizing Problematics and the Development of Decolonized Thought.

ERIC Educational Resources Information Center

Waterfall, Barbara

2002-01-01

Discusses relationship between the social work profession and indigenous populations living in colonial Canada. Examines characteristics of Eurocentrism and historical and ongoing colonial processes, and implicates the profession of social work as a colonizing practice. Urges native people to disengage from current neo-colonial and constitutional…

Polyfire project- an example of an industrial research project promoting safe industrial production of fire-resistant nanocomposites

NASA Astrophysics Data System (ADS)

Vaquero, C.; López de Ipiña, J.; Galarza, N.; Hargreaves, B.; Weager, B.; Breen, C.

2011-07-01

New developments based on nanotechnology have to guarantee safe products and processes to be accepted by society. The Polyfire project will develop and scale-up techniques for processing halogen-free, fire-retardant nanocomposite materials and coatings based on unsaturated polyester resins and organoclays. The project includes a work package that will assess the Health and Environmental impacts derived from the manipulation of nanoparticles. This work package includes the following tasks: (1) Identification of Health and Environment Impacts derived from the processes, (2) Experimentation to study specific Nanoparticle Emissions, (3) Development of a Risk Management Methodology for the process, and (4) A Comparison of the Health and Environmental Impact of New and Existing Materials. To date, potential exposure scenarios to nanomaterials have been identified through the development of a Preliminary Hazard Analysis (PHA) of the new production processes. In the next step, these scenarios will be studied and simulated to evaluate potential emissions of nanomaterials. Polyfire is a collaborative European project, funded by the European Commission 7th Framework Programme (Grant Agreement No 229220). It features 11 partners from 5 countries (5 SMEs, 3 research institutes, 2 large companies, 1 association) and runs for three years (1st September 2009 - 31st August 2012). This project is an example of an industrial research development which aims to introduce to the market new products promoting the safe use of nanomaterials.

The Integration of Climate Science and Collaborative Processes in Building Regional Climate Resiliency in Southeast Florida

NASA Astrophysics Data System (ADS)

Jurado, J.

2016-12-01

Southeast Florida is widely recognized as one of the most vulnerable regions in the United States to the impacts of climate change, especially sea level rise. Dense urban populations, low land elevations, flat topography, complex shorelines and a porous geology all contribute to the region's challenges. Regional and local governments have been working collaboratively to address shared climate mitigation and adaptation concerns as part of the four-county Southeast Florida Regional Climate Change Compact (Compact). This partnership has emphasized, in part, the use of climate data and the development of advanced technical tools and visualizations to help inform decision-making, improve communications, and guide investments. Prominent work products have included regional vulnerability maps and assessments, a unified sea level rise projection for southeast Florida, the development and application of hydrologic models in scenario planning, interdisciplinary resilient redesign planning workshops, and the development of regional climate indicators. Key to the Compact's efforts has been the engagement and expertise of academic and agency partners, including a formal collaboration between the Florida Climate Institute and the Compact to improve research and project collaborations focused on southeast Florida. This presentation will focus on the collaborative processes and work products that have served to accelerate resiliency planning and investments in southeast Florida, with specific examples of how local governments are using these work products to modernize agency processes, and build support among residents and business leaders.

The role of production and teamwork practices in construction safety: a cognitive model and an empirical case study.

PubMed

Mitropoulos, Panagiotis Takis; Cupido, Gerardo

2009-01-01

In construction, the challenge for researchers and practitioners is to develop work systems (production processes and teams) that can achieve high productivity and high safety at the same time. However, construction accident causation models ignore the role of work practices and teamwork. This study investigates the mechanisms by which production and teamwork practices affect the likelihood of accidents. The paper synthesizes a new model for construction safety based on the cognitive perspective (Fuller's Task-Demand-Capability Interface model, 2005) and then presents an exploratory case study. The case study investigates and compares the work practices of two residential framing crews: a 'High Reliability Crew' (HRC)--that is, a crew with exceptional productivity and safety over several years, and an average performing crew from the same company. The model explains how the production and teamwork practices generate the work situations that workers face (the task demands) and affect the workers ability to cope (capabilities). The case study indicates that the work practices of the HRC directly influence the task demands and match them with the applied capabilities. These practices were guided by the 'principle' of avoiding errors and rework and included work planning and preparation, work distribution, managing the production pressures, and quality and behavior monitoring. The Task Demand-Capability model links construction research to a cognitive model of accident causation and provides a new way to conceptualize safety as an emergent property of the production practices and teamwork processes. The empirical evidence indicates that the crews' work practices and team processes strongly affect the task demands, the applied capabilities, and the match between demands and capabilities. The proposed model and the exploratory case study will guide further discovery of work practices and teamwork processes that can increase both productivity and safety in construction operations. Such understanding will enable training of construction foremen and crews in these practices to systematically develop high reliability crews.

Career Development of Diverse Populations. ERIC Digest.

ERIC Educational Resources Information Center

Kerka, Sandra

Career development theories and approaches have been criticized for lack of applicability to diverse populations. Traditional career development theories and models assume that: everyone has a free choice among careers; career development is a linear, progressive, rational process; and individualism, autonomy and centrality of work are universal…

Professional Development of Preschool Teachers and Changing the Culture of the Institution of Early Education

ERIC Educational Resources Information Center

Vujicic, Lidija; Camber Tambolaš, Akvilina

2017-01-01

The culture of institutions of early education is a strong network of customs, rules, norms and behaviours that affect the daily life and work of all its individuals. Consequently, the professional development of preschool teachers is not only an individual process of professional advancement, but also a process that changes the culture of the…

Handbook for Implementing Agile in Department of Defense Information Technology Acquisition

DTIC Science & Technology

2010-12-15

Wire-frame Mockup of iTunes Cover Flow Feature (source: http://www.balsamiq.com/products/mockups/examples#mytunez...programming. The JOPES customer was included early in the development process in order to understand requirements management (story cards ), observe...transition by teaching the new members Agile processes, such as story card development, refactoring, and pair programming. Additionally, the team worked to

The Center for Advanced Systems and Engineering (CASE)

DTIC Science & Technology

2012-01-01

targets from multiple sensors. Qinru Qiu, State University of New York at Binghamton – A Neuromorphic Approach for Intelligent Text Recognition...Rogers, SUNYIT, Basic Research, Development and Emulation of Derived Models of Neuromorphic Brain Processes to Investigate the Computational Architecture...Issues They Present Work pertaining to the basic research, development and emulation of derived models of Neuromorphic brain processes to

From People's Theatre for Revolution to Popular Theatre for Reconstruction: Diary of a Zimbabwean Workshop. CESO Verhandeling No. 33.

ERIC Educational Resources Information Center

Kidd, Ross

Focusing on the experience of one of seven working groups at a theater-for-development workshop in Zimbabwe, this report details the process followed by many groups, and reveals some of the major learnings, dilemmas, contradictions, strengths, and limiting factors found in a practical village-based theater-for-development process. A brief…

Development of the B.C. Vegetation Inventory Training Program

Treesearch

Norm Shaw

2000-01-01

During the development of the B.C. Vegetation Resources Inventory, it was recognized that success would depend on the ability to implement and actually carry out the design. It was accepted that a training program would be an integral component of the inventory process. A formal process tied to basic principles of committee structure and recognition of work well done...

Mapping the work-based learning of novice teachers: charting some rich terrain.

PubMed

Cook, Vivien

2009-12-01

Work-based non-formal learning plays a key role in faculty development yet these processes are yet to be described in detail in medical education. This study sets out to illuminate these processes so that potential benefits for new and inexperienced medical educators and their mentors can be realised. The non-formal learning processes of 12 novice teachers were investigated across hospital, general practice and medical school settings. The research sought to describe 'what' and 'how' non-formal learning takes place, and whether these processes differ across teaching sites. Both clinical and non-clinical teachers of medical undergraduates from one inner city medical school were recruited for the study. Through semi-structured interviews and a 'concept map', participants were asked to identify the people and tasks which they considered central to helping them become more expert as educators. Results identified non-formal learning across a number of key dimensions, including personal development, task and role performance, and optimising clinical teaching. This learning takes place as an outcome of experience, observation, reflection and student feedback. Non-formal learning is a significant aspect of the development of novice teachers and as such it needs to be placed more firmly upon the agenda of faculty development.

Advances in dual-tone development for pitch frequency doubling

NASA Astrophysics Data System (ADS)

Fonseca, Carlos; Somervell, Mark; Scheer, Steven; Kuwahara, Yuhei; Nafus, Kathleen; Gronheid, Roel; Tarutani, Shinji; Enomoto, Yuuichiro

2010-04-01

Dual-tone development (DTD) has been previously proposed as a potential cost-effective double patterning technique1. DTD was reported as early as in the late 1990's2. The basic principle of dual-tone imaging involves processing exposed resist latent images in both positive tone (aqueous base) and negative tone (organic solvent) developers. Conceptually, DTD has attractive cost benefits since it enables pitch doubling without the need for multiple etch steps of patterned resist layers. While the concept for DTD technique is simple to understand, there are many challenges that must be overcome and understood in order to make it a manufacturing solution. Previous work by the authors demonstrated feasibility of DTD imaging for 50nm half-pitch features at 0.80NA (k1 = 0.21) and discussed challenges lying ahead for printing sub-40nm half-pitch features with DTD. While previous experimental results suggested that clever processing on the wafer track can be used to enable DTD beyond 50nm halfpitch, it also suggest that identifying suitable resist materials or chemistries is essential for achieving successful imaging results with novel resist processing methods on the wafer track. In this work, we present recent advances in the search for resist materials that work in conjunction with novel resist processing methods on the wafer track to enable DTD. Recent experimental results with new resist chemistries, specifically designed for DTD, are presented in this work. We also present simulation studies that help and support identifying resist properties that could enable DTD imaging, which ultimately lead to producing viable DTD resist materials.

A review of the silicon material task

NASA Technical Reports Server (NTRS)

Lutwack, R.

1984-01-01

The Silicon Material Task of the Flat-Plate Solar Array Project was assigned the objective of developing the technology for low-cost processes for producing polysilicon suitable for terrestrial solar-cell applications. The Task program comprised sections for process developments for semiconductor-grade and solar-cell-grade products. To provide information for deciding upon process designs, extensive investigations of the effects of impurities on material properties and the performance of cells were conducted. The silane process of the Union Carbide Corporation was carried through several stages of technical and engineering development; a pilot plant was the culmination of this effort. The work to establish silane fluidized-bed technology for a low-cost process is continuing. The advantages of the use of dichlorosilane is a siemens-type were shown by Hemlock Semiconductor Corporation. The development of other processes is described.

A review of the silicon material task

NASA Astrophysics Data System (ADS)

Lutwack, R.

1984-02-01

The Silicon Material Task of the Flat-Plate Solar Array Project was assigned the objective of developing the technology for low-cost processes for producing polysilicon suitable for terrestrial solar-cell applications. The Task program comprised sections for process developments for semiconductor-grade and solar-cell-grade products. To provide information for deciding upon process designs, extensive investigations of the effects of impurities on material properties and the performance of cells were conducted. The silane process of the Union Carbide Corporation was carried through several stages of technical and engineering development; a pilot plant was the culmination of this effort. The work to establish silane fluidized-bed technology for a low-cost process is continuing. The advantages of the use of dichlorosilane is a siemens-type were shown by Hemlock Semiconductor Corporation. The development of other processes is described.

Materials Genome Initiative

NASA Technical Reports Server (NTRS)

Vickers, John

2015-01-01

The Materials Genome Initiative (MGI) project element is a cross-Center effort that is focused on the integration of computational tools to simulate manufacturing processes and materials behavior. These computational simulations will be utilized to gain understanding of processes and materials behavior to accelerate process development and certification to more efficiently integrate new materials in existing NASA projects and to lead to the design of new materials for improved performance. This NASA effort looks to collaborate with efforts at other government agencies and universities working under the national MGI. MGI plans to develop integrated computational/experimental/ processing methodologies for accelerating discovery and insertion of materials to satisfy NASA's unique mission demands. The challenges include validated design tools that incorporate materials properties, processes, and design requirements; and materials process control to rapidly mature emerging manufacturing methods and develop certified manufacturing processes

Unit Operations in Microgravity.

ERIC Educational Resources Information Center

Allen, David T.; Pettit, Donald R.

1987-01-01

Presents some of the work currently under way in the development of microgravity chemical processes. Highlights some of the opportunities for materials processing in outer space. Emphasizes some of the contributions that chemical engineers can make in this emerging set of technologies. (TW)

Acquisition of Programming Skills

DTIC Science & Technology

1990-04-01

skills (e.g., arithmetic reasoning, work knowledge, information processing speed); and c) passive versus active learning style. Ability measures...concurrent storage and processing an individual was capable of doing), and an active learning style. Implications of the findings for the development of

Determinants of business sustainability: an ergonomics perspective.

PubMed

Genaidy, Ash M; Sequeira, Reynold; Rinder, Magda M; A-Rehim, Amal D

2009-03-01

There is a need to integrate both macro- and micro-ergonomic approaches for the effective implementation of interventions designed to improve the root causes of problems such as work safety, quality and productivity in the enterprise system. The objective of this study was to explore from an ergonomics perspective the concept of business sustainability through optimising the worker-work environment interface. The specific aims were: (a) to assess the working conditions of a production department work process with the goal to jointly optimise work safety, quality and quantity; (b) to evaluate the enterprise-wide work process at the system level as a social entity in an attempt to trace the root causes of ergonomic issues impacting employees throughout the work process. The Work Compatibility Model was deployed to examine the experiences of workers (that is, effort, perceived risk/benefit, performance and satisfaction/dissatisfaction or psychological impact) and their associations with the complex domains of the work environment (task content, physical and non-physical work environment and conditions for learning/growth/development). This was followed by assessment of the enterprise system through detailed interviews with department managers and lead workers. A system diagnostic instrument was also constructed from information derived from the published literature to evaluate the enterprise system performance. The investigation of the production department indicated that the stress and musculoskeletal pain experienced by workers (particularly on the day shift) were derived from sources elsewhere in the work process. The enterprise system evaluation and detailed interviews allowed the research team to chart the feed-forward and feedback stress propagation loops in the work system. System improvement strategies were extracted on the basis of tacit/explicit knowledge obtained from department managers and lead workers. In certain situations concerning workplace human performance issues, a combined macro-micro ergonomic methodology is essential to solve the productivity, quality and safety issues impacting employees along the trajectory or path of the enterprise-wide work process. In this study, the symptoms associated with human performance issues in one production department work process had root causes originating in the customer service department work process. In fact, the issues found in the customer service department caused performance problems elsewhere in the enterprise-wide work process such as the traffic department. Sustainable enterprise solutions for workplace human performance require the integration of macro- and micro-ergonomic approaches.

[Work organisation improvement methods applied to activities of Blood Transfusion Establishments (BTE): Lean Manufacturing, VSM, 5S].

PubMed

Bertholey, F; Bourniquel, P; Rivery, E; Coudurier, N; Follea, G

2009-05-01

Continuous improvement of efficiency as well as new expectations from customers (quality and safety of blood products) and employees (working conditions) imply constant efforts in Blood Transfusion Establishments (BTE) to improve work organisations. The Lean method (from "Lean" meaning "thin") aims at identifying wastages in the process (overproduction, waiting, over-processing, inventory, transport, motion) and then reducing them in establishing a mapping of value chain (Value Stream Mapping). It consists in determining the added value of each step of the process from a customer perspective. Lean also consists in standardizing operations while implicating and responsabilizing all collaborators. The name 5S comes from the first letter of five operations of a Japanese management technique: to clear, rank, keep clean, standardize, make durable. The 5S method leads to develop the team working inducing an evolution of the way in the management is performed. The Lean VSM method has been applied to blood processing (component laboratory) in the Pays de la Loire BTE. The Lean 5S method has been applied to blood processing, quality control, purchasing, warehouse, human resources and quality assurance in the Rhône-Alpes BTE. The experience returns from both BTE shows that these methods allowed improving: (1) the processes and working conditions from a quality perspective, (2) the staff satisfaction, (3) the efficiency. These experiences, implemented in two BTE for different processes, confirm the applicability and usefulness of these methods to improve working organisations in BTE.

The Specific Features of design and process engineering in branch of industrial enterprise

NASA Astrophysics Data System (ADS)

Sosedko, V. V.; Yanishevskaya, A. G.

2017-06-01

Production output of industrial enterprise is organized in debugged working mechanisms at each stage of product’s life cycle from initial design documentation to product and finishing it with utilization. The topic of article is mathematical model of the system design and process engineering in branch of the industrial enterprise, statistical processing of estimated implementation results of developed mathematical model in branch, and demonstration of advantages at application at this enterprise. During the creation of model a data flow about driving of information, orders, details and modules in branch of enterprise groups of divisions were classified. Proceeding from the analysis of divisions activity, a data flow, details and documents the state graph of design and process engineering was constructed, transitions were described and coefficients are appropriated. To each condition of system of the constructed state graph the corresponding limiting state probabilities were defined, and also Kolmogorov’s equations are worked out. When integration of sets of equations of Kolmogorov the state probability of system activity the specified divisions and production as function of time in each instant is defined. On the basis of developed mathematical model of uniform system of designing and process engineering and manufacture, and a state graph by authors statistical processing the application of mathematical model results was carried out, and also advantage at application at this enterprise is shown. Researches on studying of loading services probability of branch and third-party contractors (the orders received from branch within a month) were conducted. The developed mathematical model of system design and process engineering and manufacture can be applied to definition of activity state probability of divisions and manufacture as function of time in each instant that will allow to keep account of loading of performance of work in branches of the enterprise.

Web Time-Management Tool

NASA Technical Reports Server (NTRS)

2000-01-01

Oak Grove Reactor, developed by Oak Grove Systems, is a new software program that allows users to integrate workflow processes. It can be used with portable communication devices. The software can join e-mail, calendar/scheduling and legacy applications into one interactive system via the web. Priority tasks and due dates are organized and highlighted to keep the user up to date with developments. Reactor works with existing software and few new skills are needed to use it. Using a web browser, a user can can work on something while other users can work on the same procedure or view its status while it is being worked on at another site. The software was developed by the Jet Propulsion Lab and originally put to use at Johnson Space Center.

Part of the job: the role of physical work conditions in the nurse turnover process.

PubMed

Vardaman, James M; Cornell, Paul T; Allen, David G; Gondo, Maria B; Muslin, Ivan S; Mobley, Robin N; Brock, Meagan E; Sigmon, Tracy L

2014-01-01

Retention of nursing staff remains an important issue for health care managers. Turnover research has focused primarily on motivational and social factors as keys to retention, whereas the role of the physical work conditions has received considerably less attention. However, work design theory suggests that physical work conditions may be an important factor in fostering retention among nursing staff. The aim of this study was to integrate work design theory with turnover process models to explore the influence of perceptions of physical work conditions on the development of turnover intentions among nursing staff. Drawing on two samples of registered nurses working in cancer units in metropolitan hospitals in the southeastern United States, this study explores the impact of perceptions of physical work conditions on turnover intentions using ordinary least squares regression. Hypotheses are tested in Study 1 and replicated in Study 2. A measure of perceptions of physical work conditions is also developed and validated using exploratory (Study 1) and confirmatory (Study 2) factor analyses. Perceptions of physical work conditions explain variance in turnover intentions above than that explained by motivational and social factors. Specifically, employee perceptions of noisy work conditions are found to significantly increase turnover intentions, whereas perceptions that work conditions facilitate tasks were found to significantly reduce turnover intentions. Perceptions of temperature and health hazard did not show significant effects. Results suggest that health care managers and scholars should re-examine the role of physical work conditions in the turnover process. Investments in upgrades that facilitate tasks may foster retention better than investments that simply improve employee comfort. Negative perceptions of work conditions may have no impact if they are considered a normal "part of the job," although negative perceptions of conditions that are viewed as under the organization's control may be important in creating a desire to leave.

A study of palm biomass processing strategy in Sarawak

NASA Astrophysics Data System (ADS)

Lee, S. J. Y.; Ng, W. P. Q.; Law, K. H.

2017-06-01

In the past decades, palm industry is booming due to its profitable nature. An environmental concern regarding on the palm industry is the enormous amount of waste produced from palm industry. The waste produced or palm biomass is one significant renewable energy source and raw material for value-added products like fiber mats, activated carbon, dried fiber, bio-fertilizer and et cetera in Malaysia. There is a need to establish the palm biomass industry for the recovery of palm biomass for efficient utilization and waste reduction. The development of the industry is strongly depending on the two reasons, the availability and supply consistency of palm biomass as well as the availability of palm biomass processing facilities. In Malaysia, the development of palm biomass industry is lagging due to the lack of mature commercial technology and difficult logistic planning as a result of scattered locality of palm oil mill, where palm biomass is generated. Two main studies have been carried out in this research work: i) industrial study of the feasibility of decentralized and centralized palm biomass processing in Sarawak and ii) development of a systematic and optimized palm biomass processing planning for the development of palm biomass industry in Sarawak, Malaysia. Mathematical optimization technique is used in this work to model the above case scenario for biomass processing to achieve maximum economic potential and resource feasibility. An industrial study of palm biomass processing strategy in Sarawak has been carried out to evaluate the optimality of centralized processing and decentralize processing of the local biomass industry. An optimal biomass processing strategy is achieved.

Reinvention/reengineering of business and technical processes

NASA Technical Reports Server (NTRS)

Olsen, Eugene A.

1996-01-01

The changing marketplace as evidenced by global competition is requiring American organizations to rethink, regroup, and redesign their processes. The umbrella of total quality management (TQM) includes many quality methods, techniques, tools, and approaches. There is no right way for every situation or circumstance. Adaptability and experimentation of several tools is necessary. Process management when properly applied can lead to continuous quality improvements. But some processes simply need to be discarded and new ones developed. This reengineering often results in vertical compression and job redesign and restructuring. Work activities must be designed around processes, not processes around work activities. Reengineering and process management do not stand alone--they support each other. Senior executive leadership and empowerment of workers at all organizational levels is vital for both short-term and long-term success.

Life-span development of visual working memory: when is feature binding difficult?

PubMed

Cowan, Nelson; Naveh-Benjamin, Moshe; Kilb, Angela; Saults, J Scott

2006-11-01

We asked whether the ability to keep in working memory the binding between a visual object and its spatial location changes with development across the life span more than memory for item information. Paired arrays of colored squares were identical or differed in the color of one square, and in the latter case, the changed color was unique on that trial (item change) or was duplicated elsewhere in the array (color-location binding change). Children (8-10 and 11-12 years old) and older adults (65-85 years old) showed deficits relative to young adults. These were only partly simulated by dividing attention in young adults. The older adults had an additional deficiency, specifically in binding information, which was evident only when item- and binding-change trials were mixed together. In that situation, the older adults often overlooked the more subtle, binding-type changes. Some working memory processes related to binding undergo life-span development in an inverted-U shape, whereas other, bias- and salience-related processes that influence the use of binding information seem to develop monotonically.

The evolution and development of an instrument to measure essential professional nursing practices.

PubMed

Kramer, Marlene; Brewer, Barbara B; Halfer, Diana; Hnatiuk, Cynthia Nowicki; MacPhee, Maura; Schmalenberg, Claudia

2014-11-01

Nursing continues to evolve from a task-oriented occupation to a holistic professional practice. Increased professionalism requires accurate measurement of care processes and practice. Nursing studies often omit measurement of the relationship between structures in the work environment and processes of care or between processes of care and patient outcomes. Process measurement is integral to understanding and improving nursing practice. This article describes the development of an updated Essentials of Magnetism process measurement instrument for clinical nurses (CNs) practicing on inpatient units in hospitals. It has been renamed Essential Professional Nursing Practices: CN.

The relationship between agreeableness and the development of the working alliance in patients with borderline personality disorder.

PubMed

Hirsh, Jacob B; Quilty, Lena C; Bagby, R Michael; McMain, Shelley F

2012-08-01

The working alliance between therapist and patient is an important component of effective interventions for borderline personality disorder (BPD). The current study examines whether client personality affects the development of the working alliance during the treatment of BPD, and whether this influences treatment effectiveness. Data was based on 87 patients with BPD who were participants in a randomized controlled trial comparing Dialectical Behavior Therapy (DBT) and general psychiatric management. Higher levels of trait Agreeableness were associated with steeper increases in working alliance throughout treatment, but only in the DBT condition. Increases in working alliance were in turn associated with better clinical outcomes. Mediation models revealed a significant indirect path from Agreeableness to better clinical outcomes, mediated through larger improvements in working alliance over time. These results highlight the role that patient personality can play during the therapeutic process, with a specific focus on the importance of Agreeableness for alliance development.

Flat-plate solar-array project. Experimental process system development unit for producing semiconductor-grade silicon using the silane-to-silicon process

NASA Technical Reports Server (NTRS)

1981-01-01

The engineering design, fabrication, assembly, operation, economic analysis, and process support R and D for an Experimental Process System Development Unit (EPSDU) are reported. About 95% of purchased equipment is received and will be reshipped to the West Coast location. The Data Collection System is completed. In the area of melting/consolidation, to the system using silicon powder transfer, melting and shotting on a pseudocontinuous basis is demonstrated. It is proposed to continue the very promising fluid bed work.

Reports of Planetary Geology Program, 1981

NASA Technical Reports Server (NTRS)

Holt, H. E. (Compiler)

1981-01-01

Abstracts of 205 reports from Principal investigators of NASA's Planetary Geology Program succinctly summarize work conducted and reflect the significant accomplishments. The entries are arranged under the following topics: (1) Saturnian satellites; (2) asteroids, comets and Galilean satellites; (3) cratering processes and landform development; (4) volcanic processes and landforms; (5) Aerolian processes and landforms; (6) fluvial, preglacial, and other processes of landform development; (7) Mars polar deposits, volatiles, and climate; (8) structure, tectonics, and stratigraphy; (9) remote sensing and regolith chemistry; (10) cartography and geologic mapping; and (11) special programs.

Validating a work group climate assessment tool for improving the performance of public health organizations

PubMed Central

Perry, Cary; LeMay, Nancy; Rodway, Greg; Tracy, Allison; Galer, Joan

2005-01-01

Background This article describes the validation of an instrument to measure work group climate in public health organizations in developing countries. The instrument, the Work Group Climate Assessment Tool (WCA), was applied in Brazil, Mozambique, and Guinea to assess the intermediate outcomes of a program to develop leadership for performance improvement. Data were collected from 305 individuals in 42 work groups, who completed a self-administered questionnaire. Methods The WCA was initially validated using Cronbach's alpha reliability coefficient and exploratory factor analysis. This article presents the results of a second validation study to refine the initial analyses to account for nested data, to provide item-level psychometrics, and to establish construct validity. Analyses included eigenvalue decomposition analysis, confirmatory factor analysis, and validity and reliability analyses. Results This study confirmed the validity and reliability of the WCA across work groups with different demographic characteristics (gender, education, management level, and geographical location). The study showed that there is agreement between the theoretical construct of work climate and the items in the WCA tool across different populations. The WCA captures a single perception of climate rather than individual sub-scales of clarity, support, and challenge. Conclusion The WCA is useful for comparing the climates of different work groups, tracking the changes in climate in a single work group over time, or examining differences among individuals' perceptions of their work group climate. Application of the WCA before and after a leadership development process can help work groups hold a discussion about current climate and select a target for improvement. The WCA provides work groups with a tool to take ownership of their own group climate through a process that is simple and objective and that protects individual confidentiality. PMID:16223447

Hyposensitization to poison ivy after working in a cashew nut shell oil processing factory.

PubMed

Reginella, R F; Fairfield, J C; Marks, J G

1989-04-01

19 adults were patch tested to urushiol, the allergen in poison ivy/oak, to determine their sensitivity to this allergen after working in a cashew nut shell oil (CNSO) processing plant. The cashew nut tree and poison ivy/oak are in the same botanical family. Anacardiaceae, and they share similar chemicals which cause allergic contact dermatitis. 13 of the 19 workers had a preemployment history of poison ivy sensitivity, with 10 developing CNSO dermatitis. After working in this factory for several months, 9 of the 13 noticed a decreased sensitivity or no sensitivity to poison ivy/oak. When tested to urushiol extract, only 3 reacted positively, 2 minimally. These results imply that hyposensitization to poison ivy/oak occurred in these employees after development of hardening to cashew nut shell oil.

Optimization Models for Scheduling of Jobs

PubMed Central

Indika, S. H. Sathish; Shier, Douglas R.

2006-01-01

This work is motivated by a particular scheduling problem that is faced by logistics centers that perform aircraft maintenance and modification. Here we concentrate on a single facility (hangar) which is equipped with several work stations (bays). Specifically, a number of jobs have already been scheduled for processing at the facility; the starting times, durations, and work station assignments for these jobs are assumed to be known. We are interested in how best to schedule a number of new jobs that the facility will be processing in the near future. We first develop a mixed integer quadratic programming model (MIQP) for this problem. Since the exact solution of this MIQP formulation is time consuming, we develop a heuristic procedure, based on existing bin packing techniques. This heuristic is further enhanced by application of certain local optimality conditions. PMID:27274921

A patient workflow management system built on guidelines.

PubMed Central

Dazzi, L.; Fassino, C.; Saracco, R.; Quaglini, S.; Stefanelli, M.

1997-01-01

To provide high quality, shared, and distributed medical care, clinical and organizational issues need to be integrated. This work describes a methodology for developing a Patient Workflow Management System, based on a detailed model of both the medical work process and the organizational structure. We assume that the medical work process is represented through clinical practice guidelines, and that an ontological description of the organization is available. Thus, we developed tools 1) for acquiring the medical knowledge contained into a guideline, 2) to translate the derived formalized guideline into a computational formalism, precisely a Petri Net, 3) to maintain different representation levels. The high level representation guarantees that the Patient Workflow follows the guideline prescriptions, while the low level takes into account the specific organization characteristics and allow allocating resources for managing a specific patient in daily practice. PMID:9357606

Systematic process synthesis and design methods for cost effective waste minimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biegler, L.T.; Grossman, I.E.; Westerberg, A.W.

We present progress on our work to develop synthesis methods to aid in the design of cost effective approaches to waste minimization. Work continues to combine the approaches of Douglas and coworkers and of Grossmann and coworkers on a hierarchical approach where bounding information allows it to fit within a mixed integer programming approach. We continue work on the synthesis of reactors and of flexible separation processes. In the first instance, we strive for methods we can use to reduce the production of potential pollutants, while in the second we look for ways to recover and recycle solvents.

The Helpfulness of Spiritually Influenced Group Work in Developing Self-Awareness and Self-Esteem: A Preliminary Investigation

PubMed Central

Coholic, Diana

2005-01-01

This paper discusses an exploratory study that investigated the helpfulness of spiritually influenced group work with eight adult women who shared a history of substance abuse. The overall purpose of the group was to help participants develop their self-awareness and self-esteem. The group, which was contextualized in transpersonal theory, was organized around the following themes and experiential exercises: meditation, mindfulness practice, dream work, stream of consciousness writing, the shadow self, and other arts-based processes. Grounded-theory analysis of group sessions and individual interviews with the participants found that the participants perceived the group to be helpful in developing their self-awareness and self-esteem. While the participants identified different aspects of the group as spiritual, making-meaning was one practice that was consistently described as a spiritually sensitive process. The results of this study in this emergent field are promising and suggestions are provided for future research. PMID:16200326

Integration of new technology into clinical practice after FDA approval.

PubMed

Govil, Ashul; Hao, Steven C

2016-10-01

Development of new medical technology is a crucial part of the advancement of medicine and our ability to better treat patients and their diseases. This process of development is long and arduous and requires a significant investment of human, financial and material capital. However, technology development can be rewarded richly by its impact on patient outcomes and successful sale of the product. One of the major regulatory hurdles to technology development is the Food and Drug Administration (FDA) approval process, which is necessary before a technology can be marketed and sold in the USA. Many businesses, medical providers and consumers believe that the FDA approval process is the only hurdle prior to use of the technology in day-to-day care. In order for the technology to be adopted into clinical use, reimbursement for both the device as well as the associated work performed by physicians and medical staff must be in place. Work and coverage decisions require Current Procedural Terminology (CPT) code development and Relative Value Scale Update Committee (RUC) valuation determination. Understanding these processes is crucial to the timely availability of new technology to patients and providers. Continued and better partnerships between physicians, industry, regulatory bodies and payers will facilitate bringing technology to market sooner and ensure appropriate utilization.

Validating the client-focused considering work model for people living with HIV and quantifying phases of change of commitment to work.

PubMed

Conyers, Liza M; Boomer, K B

2017-06-01

The primary purpose of this study was to validate the client-focused considering work model and to gain a better understanding of the nature of the relationship among the four domains purported to influence the considering work process (medical, psychosocial, financial/legal and vocational). A second goal of the study was to quantify the relationship between these four domains and the phases of considering work (contemplation, preparation, action, resolution). Structural equation modeling was used to analyze data of 1702 diverse (43% Black, 31% White, 19% Latino 7% other) unemployed respondents who were recruited from AIDS Service Organizations (ASO) and networks across the United States to complete the National Working Positive Vocational Development and Employment Needs Survey (NWPC-VDENS). Overall the results of this study supported the validity of the client-focused considering work model and helped to provide a deeper level of understanding of the relationship among the domains of influence and their contribution to the level of commitment to the considering work process. Implications for Rehabilitation This model enables rehabilitation professionals to consider interventions for clients at different phases (contemplation, preparation, action) of considering work. Rehabilitation professionals are encouraged to provide prevocational services to engage people with HIV in the considering work process. When assisting PLWH within the considering work process, it is important to assess not only medical status but also psychosocial, financial and vocational concerns.

Skill Development in Experimental Courses

ERIC Educational Resources Information Center

Bagán, Héctor; Sayós, Rosa; García, José F.

2015-01-01

Experimental courses offer a good opportunity to work with competences, promoting the incorporation of strategies oriented towards motivating students to actively involve in the learning process, promoting reflexive learning and developing generic skills. This study presents different ways of developing and evaluating some important general…

Living Design Memory: Framework, Implementation, Lessons Learned.

ERIC Educational Resources Information Center

Terveen, Loren G.; And Others

1995-01-01

Discusses large-scale software development and describes the development of the Designer Assistant to improve software development effectiveness. Highlights include the knowledge management problem; related work, including artificial intelligence and expert systems, software process modeling research, and other approaches to organizational memory;…

[Municipalities as places for social work for the elderly].

PubMed

Rüßler, Harald; Heite, Elisabeth

2017-07-01

Against the background of social and demographic changes, this article addresses the design and organization of processes of aging within municipal contexts. It is assumed that the renaissance of the local communal situation corresponds to processes of individualization and subjectivation, which are characteristic for (post)industrial western societies, and that this development is one of the reasons that community-based social work is regaining importance. A case study of social work for the elderly in a municipality of the Ruhr area, which is imbedded in a municipal senior citizens policy concept, illustrates this assumption. The conclusion identifies the scope of actions for social work for the elderly as well as their limitations.

The human factors of quality and QA in R D environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hill, S.G.

1990-01-01

Achieving quality is a human activity. It is therefore important to consider the human in the design, development and evaluation of work processes and environments in an effort to enhance human performance and minimize error. It is also important to allow for individual differences when considering human factors issues. Human Factors is the field of study which can provide information on integrating the human into the system. Human factors and quality are related for the customer of R D work, R D personnel who perform the work, and the quality professional who overviews the process of quality in the work.more » 18 refs., 1 fig.« less

Relationship between individual differences in speech processing and cognitive functions.

PubMed

Ou, Jinghua; Law, Sam-Po; Fung, Roxana

2015-12-01

A growing body of research has suggested that cognitive abilities may play a role in individual differences in speech processing. The present study took advantage of a widespread linguistic phenomenon of sound change to systematically assess the relationships between speech processing and various components of attention and working memory in the auditory and visual modalities among typically developed Cantonese-speaking individuals. The individual variations in speech processing are captured in an ongoing sound change-tone merging in Hong Kong Cantonese, in which typically developed native speakers are reported to lose the distinctions between some tonal contrasts in perception and/or production. Three groups of participants were recruited, with a first group of good perception and production, a second group of good perception but poor production, and a third group of good production but poor perception. Our findings revealed that modality-independent abilities of attentional switching/control and working memory might contribute to individual differences in patterns of speech perception and production as well as discrimination latencies among typically developed speakers. The findings not only have the potential to generalize to speech processing in other languages, but also broaden our understanding of the omnipresent phenomenon of language change in all languages.

Three-dimensional rendering of segmented object using matlab - biomed 2010.

PubMed

Anderson, Jeffrey R; Barrett, Steven F

2010-01-01

The three-dimensional rendering of microscopic objects is a difficult and challenging task that often requires specialized image processing techniques. Previous work has been described of a semi-automatic segmentation process of fluorescently stained neurons collected as a sequence of slice images with a confocal laser scanning microscope. Once properly segmented, each individual object can be rendered and studied as a three-dimensional virtual object. This paper describes the work associated with the design and development of Matlab files to create three-dimensional images from the segmented object data previously mentioned. Part of the motivation for this work is to integrate both the segmentation and rendering processes into one software application, providing a seamless transition from the segmentation tasks to the rendering and visualization tasks. Previously these tasks were accomplished on two different computer systems, windows and Linux. This transition basically limits the usefulness of the segmentation and rendering applications to those who have both computer systems readily available. The focus of this work is to create custom Matlab image processing algorithms for object rendering and visualization, and merge these capabilities to the Matlab files that were developed especially for the image segmentation task. The completed Matlab application will contain both the segmentation and rendering processes in a single graphical user interface, or GUI. This process for rendering three-dimensional images in Matlab requires that a sequence of two-dimensional binary images, representing a cross-sectional slice of the object, be reassembled in a 3D space, and covered with a surface. Additional segmented objects can be rendered in the same 3D space. The surface properties of each object can be varied by the user to aid in the study and analysis of the objects. This inter-active process becomes a powerful visual tool to study and understand microscopic objects.

Development of Surface Mechanical Attrition Treatment (SMAT) and Electrodeposition Process for Generating Nanostructured Materials and Study of Their Tensile Properties

NASA Astrophysics Data System (ADS)

Chan, Hoi Lam

This work systematically investigates two of the most promising synthesis methods for producing nanostructured (NS) materials: surface mechanical attrition treatment (SMAT) and the electrodeposition (ED) process, and obtains the proper conditions for fabricating NS materials in bulk form and studies the properties of these materials. SMAT is one of the recently developed processes to form nano-crystallized surface layer and refine grains in the subsurface layers, by actuating a number of spherical projectiles to impact the sample surface. In this work, the detailed measurement of ball impinging velocity is presented, and the resulted strain-rate and strains are theoretically modeled. Consequently the relation between plastic strain history and the observed microstructures is established. The SMAT process with different numbers of balls is explored to manifest that an optimum number of balls exists for the highest efficiency. ED process is widely used in producing NS materials these days. In this work, the relationships among non-metallic substrates, current type, current densities, microstructure and crystallographic textures, and mechanical properties is presented in order to demonstrate the influences of the deposition parameters in obtaining nano-grains and nano-twins microstructures. This work also examines the availability of obtaining bulk NS materials with desirable ductility in production-scale conditions through understanding these relationships. In the last part of the study, the effect of SMAT on the electrodeposits is studied. Tensile properties, microstructures and textures of the SMATed electrodeposits have been examined. The results demonstrate that the NS matrix obtained by the ED process with sufficient thickness retains desirable ductility after employing SMAT technology, and the SMAT process further enhances the strength of the electrodeposits.

Demodulation processes in auditory perception

NASA Astrophysics Data System (ADS)

Feth, Lawrence L.

1994-08-01

The long range goal of this project is the understanding of human auditory processing of information conveyed by complex, time-varying signals such as speech, music or important environmental sounds. Our work is guided by the assumption that human auditory communication is a 'modulation - demodulation' process. That is, we assume that sound sources produce a complex stream of sound pressure waves with information encoded as variations ( modulations) of the signal amplitude and frequency. The listeners task then is one of demodulation. Much of past. psychoacoustics work has been based in what we characterize as 'spectrum picture processing.' Complex sounds are Fourier analyzed to produce an amplitude-by-frequency 'picture' and the perception process is modeled as if the listener were analyzing the spectral picture. This approach leads to studies such as 'profile analysis' and the power-spectrum model of masking. Our approach leads us to investigate time-varying, complex sounds. We refer to them as dynamic signals and we have developed auditory signal processing models to help guide our experimental work.

Defense Waste Processing Facility Nitric- Glycolic Flowsheet Chemical Process Cell Chemistry: Part 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zamecnik, J.; Edwards, T.

The conversions of nitrite to nitrate, the destruction of glycolate, and the conversion of glycolate to formate and oxalate were modeled for the Nitric-Glycolic flowsheet using data from Chemical Process Cell (CPC) simulant runs conducted by Savannah River National Laboratory (SRNL) from 2011 to 2016. The goal of this work was to develop empirical correlation models to predict these values from measureable variables from the chemical process so that these quantities could be predicted a-priori from the sludge or simulant composition and measurable processing variables. The need for these predictions arises from the need to predict the REDuction/OXidation (REDOX) statemore » of the glass from the Defense Waste Processing Facility (DWPF) melter. This report summarizes the work on these correlations based on the aforementioned data. Previous work on these correlations was documented in a technical report covering data from 2011-2015. This current report supersedes this previous report. Further refinement of the models as additional data are collected is recommended.« less

Rapid development of Proteomic applications with the AIBench framework.

PubMed

López-Fernández, Hugo; Reboiro-Jato, Miguel; Glez-Peña, Daniel; Méndez Reboredo, José R; Santos, Hugo M; Carreira, Ricardo J; Capelo-Martínez, José L; Fdez-Riverola, Florentino

2011-09-15

In this paper we present two case studies of Proteomics applications development using the AIBench framework, a Java desktop application framework mainly focused in scientific software development. The applications presented in this work are Decision Peptide-Driven, for rapid and accurate protein quantification, and Bacterial Identification, for Tuberculosis biomarker search and diagnosis. Both tools work with mass spectrometry data, specifically with MALDI-TOF spectra, minimizing the time required to process and analyze the experimental data. Copyright 2011 The Author(s). Published by Journal of Integrative Bioinformatics.

Developing critical care skills for nurses in the ward environment: a work-based learning approach.

PubMed

Thorne, Linda; Hackwood, Helen

2002-01-01

An account of collaborative working between an NHS trust and university in responding to the critical care agenda. An 'Introduction to Critical Care Skills' course initiative, which addresses the needs of nurses caring for level 1 and 2 patients in ward areas, is discussed. Work-based learning forms the focus of skills development using core competencies related to a holistic approach to caring for patients with complex needs. A dynamic evolving process of course development is promoting quality care for patients and closely reflects the needs of those caring for acutely ill patients outside the designated critical care environment.

Integration of safety engineering into a cost optimized development program.

NASA Technical Reports Server (NTRS)

Ball, L. W.

1972-01-01

A six-segment management model is presented, each segment of which represents a major area in a new product development program. The first segment of the model covers integration of specialist engineers into 'systems requirement definition' or the system engineering documentation process. The second covers preparation of five basic types of 'development program plans.' The third segment covers integration of system requirements, scheduling, and funding of specialist engineering activities into 'work breakdown structures,' 'cost accounts,' and 'work packages.' The fourth covers 'requirement communication' by line organizations. The fifth covers 'performance measurement' based on work package data. The sixth covers 'baseline requirements achievement tracking.'

The 2010 AOP Workshop Summary Report

NASA Technical Reports Server (NTRS)

Hooker, Stanford B.; Morrow, John H.; Brown, James W.; Firestone, Elaine R.

2011-01-01

The rationale behind the current workshop, which was hosted by Biospherical Instruments Inc. (BSI), was to update the community and get community input with respect to the following: topics not addressed during the first workshop, specifically the processing of above-water apparent optical property (AOP data) within the Processing of Radiometric Observations of Seawater using Information Technologies (PROSIT) architecture; PROSIT data processing issues that have developed or tasks that have been completed, since the first workshop; and NASA instrumentation developments, both above- and in-water, that are relevant to both workshops and next generation mission planning. The workshop emphasized presentations on new AOP instrumentation, desired and required features for processing above-water measurements of the AOPs of seawater, working group discussions, and a community update for the in-water data processing already present in PROSIT. The six working groups were organized as follows: a) data ingest and data products; b) required and desired features for optically shallow and optically deep waters; c) contamination rejection (clouds), corrections, and data filtering; d) sun photometry and polarimetry; e) instrumentation networks; and f) hyperspectral versus fixed-wavelength sensors. The instrumentation networks working group was intended to provide more detailed information about desired and required features of autonomous sampling systems. Plenary discussions produced a number of recommendations for evolving and documenting PROSIT.

Curriculum Development as Continuing Teacher Education.

ERIC Educational Resources Information Center

Laurenze, Andreas

1979-01-01

Reports on the curriculum development process used as part of teacher education, identifying problems of teacher time and effort, relationship to the practical demands of classroom teaching, and links with other aspects of teacher's work. (Author/CK)

Setting new standards in MEMS

NASA Astrophysics Data System (ADS)

Rimskog, Magnus; O'Loughlin, Brian J.

2007-02-01

Silex Microsystems handles a wide range of customized MEMS components. This speech will be describing Silex's MEMS foundry work model for providing customized solutions based on MEMS in a cost effective and well controlled manner. Factors for success are the capabilities to reformulate a customer product concept to manufacturing processes in the wafer fab, using standard process modules and production equipment. A well-controlled system increases the likelihood of a first batch success and enables fast ramp-up into volume production. The following success factors can be listed: strong enduring relationships with the customers; highly qualified well-experienced specialists working close with the customer; process solutions and building blocks ready to use out of a library; addressing manufacturing issues in the early design phase; in-house know how to meet demands for volume manufacturing; access to a wafer fab with high capacity, good organization, high availability of equipment, and short lead times; process development done in the manufacturing environment using production equipment for easy ramp-up to volume production. The article covers a method of working to address these factors: to have a long and enduring relationships with customers utilizing MEMS expertise and working close with customers, to translate their product ideas to MEMS components; to have stable process solutions for features such as Low ohmic vias, Spiked electrodes, Cantilevers, Silicon optical mirrors, Micro needles, etc, which can be used and modified for the customer needs; to use a structured development and design methodology in order to handle hundreds of process modules, and setting up standard run sheets. It is also very important to do real time process development in the manufacturing line. It minimizes the lead-time for the ramp-up of production; to have access to a state of the art Wafer Fab which is well organized, controlled and flexible, with high capacity and short lead-time for prototypes. It is crucial to have intimate control of processes, equipment, organization, production flow control and WIP. This has been addressed by using a fully computerized control and reporting system.

Stream computing for biomedical signal processing: A QRS complex detection case-study.

PubMed

Murphy, B M; O'Driscoll, C; Boylan, G B; Lightbody, G; Marnane, W P

2015-01-01

Recent developments in "Big Data" have brought significant gains in the ability to process large amounts of data on commodity server hardware. Stream computing is a relatively new paradigm in this area, addressing the need to process data in real time with very low latency. While this approach has been developed for dealing with large scale data from the world of business, security and finance, there is a natural overlap with clinical needs for physiological signal processing. In this work we present a case study of streams processing applied to a typical physiological signal processing problem: QRS detection from ECG data.

Consolidated fuel reprocessing program

NASA Astrophysics Data System (ADS)

1985-02-01

Improved processes and components for the Breeder Reprocessing Engineering Test (BRET) were identified and developed as well as the design, procurement and development of prototypic equipment. The integrated testing of process equipment and flowsheets prototypical of a pilot scale full reprocessing plant, and also for testing prototypical remote features of specific complex components in the system are provided. Information to guide the long range activities of the Consolidated Fuel Reprocessing Program (CERP), a focal point for foreign exchange activities, and support in specialized technical areas are described. Research and development activities in HTGR fuel treatment technology are being conducted. Head-end process and laboratory scale development efforts, as well as studies specific to HTGR fuel, are reported. The development of off-gas treatment processes has generic application to fuel reprocessing, progress in this work is also reported.

Image retrieval and processing system version 2.0 development work

NASA Technical Reports Server (NTRS)

Slavney, Susan H.; Guinness, Edward A.

1991-01-01

The Image Retrieval and Processing System (IRPS) is a software package developed at Washington University and used by the NASA Regional Planetary Image Facilities (RPIF's). The IRPS combines data base management and image processing components to allow the user to examine catalogs of image data, locate the data of interest, and perform radiometric and geometric calibration of the data in preparation for analysis. Version 1.0 of IRPS was completed in Aug. 1989 and was installed at several IRPS's. Other RPIF's use remote logins via NASA Science Internet to access IRPS at Washington University. Work was begun on designing and population a catalog of Magellan image products that will be part of IRPS Version 2.0, planned for release by the end of calendar year 1991. With this catalog, a user will be able to search by orbit and by location for Magellan Basic Image Data Records (BIDR's), Mosaicked Image Data Records (MIDR's), and Altimetry-Radiometry Composite Data Records (ARCDR's). The catalog will include the Magellan CD-ROM volume, director, and file name for each data product. The image processing component of IRPS is based on the Planetary Image Cartography Software (PICS) developed by the U.S. Geological Survey, Flagstaff, Arizona. To augment PICS capabilities, a set of image processing programs were developed that are compatible with PICS-format images. This software includes general-purpose functions that PICS does not have, analysis and utility programs for specific data sets, and programs from other sources that were modified to work with PICS images. Some of the software will be integrated into the Version 2.0 release of IRPS. A table is presented that lists the programs with a brief functional description of each.

How can the rehabilitation planning process at the workplace be improved? A qualitative study from employers' perspective.

PubMed

Larsson, Agneta; Gard, Gunvor

2003-09-01

Employers in Sweden are by law responsible for planning and controlling the working environment situation in their companies and for ensuring that any need for rehabilitation is noted as soon as possible and that action is taken. This includes developing a plan for rehabilitation. The aim of this study is to describe employers' experiences of the work rehabilitation planning process at the workplace, and how it can be improved with a focus on quality and cost-effectiveness. Qualitative interviews were performed with 10 employers of employee/s that had participated in vocational rehabilitation at a rehabilitation center in the North of Sweden. The results showed that employers were interested in detecting work rehabilitation needs and in taking action early. Rehabilitation at the workplace could be improved by development of routines, improved work relations and work technique, and environment in-service training at the workplace. Prevention was perceived as a prerequisite for a good result of rehabilitation. Attention to social and geographic conditions is needed. Organizational and financial limitations exist.

Psychometric properties of the Chinese-version Quality of Nursing Work Life Scale.

PubMed

Lee, Ya-Wen; Dai, Yu-Tzu; McCreary, Linda L; Yao, Grace; Brooks, Beth A

2014-09-01

In this study, we developed and tested the psychometric properties of the Chinese-version Quality of Nursing Work Life Scale along seven subscales: supportive milieu with security and professional recognition, work arrangement and workload, work/home life balance, head nurse's/supervisor's management style, teamwork and communication, nursing staffing and patient care, and milieu of respect and autonomy. An instrument-development procedure with three phases was conducted in seven hospitals in 2010-2011. Phase I comprised translation and the cultural-adaptation process, phase II comprised a pilot study, and phase III comprised a field-testing process. Purposive sampling was used in the pilot study (n = 150) and the large field study (n = 1254). Five new items were added, and 85.7% of the original items were retained in the 41 item Chinese version. Principal component analysis revealed that a model accounted for 56.6% of the variance with acceptable internal consistency, concurrent validity, and discriminant validity. This study gave evidence of reliability and validity of the 41 item Chinese-version Quality of Nursing Work Life Scale. © 2014 Wiley Publishing Asia Pty Ltd.

New procedures of ergonomics design in a large oil company.

PubMed

Alhadeff, Cynthia Mossé; Silva, Rosana Fernandes da; Reis, Márcia Sales dos

2012-01-01

This study presents the challenge involved in the negotiation and construction of a standard process in a major petroleum company that has the purpose of guiding the implementation of ergonomic studies in the development of projects, systemising the implementation of ergonomics design. The standard was created by a multi-disciplinary working group consisting of specialists in ergonomics, who work in a number of different areas of the company. The objective was to guide "how to" undertake ergonomics in all projects, taking into consideration the development of the ergonomic appraisals of work. It also established that all the process, in each project phase, should be accompanied by a specialist in ergonomics. This process as an innovation in the conception of projects in this company, signals a change of culture, and, for this reason requires broad dissemination throughout the several company leadership levels, and training of professionals in projects of ergonomics design. An implementation plan was also prepared and approved by the corporate governance, complementing the proposed challenge. In this way, this major oil company will implement new procedures of ergonomics design to promote health, safety, and wellbeing of the workforce, besides improving the performance and reliability of its systems and processes.

Eco-friendly electron beam lithography using water-developable resist material derived from biomass

NASA Astrophysics Data System (ADS)

Takei, Satoshi; Oshima, Akihiro; Wakabayashi, Takanori; Kozawa, Takahiro; Tagawa, Seiichi

2012-07-01

We investigated the eco-friendly electron beam (EB) lithography using a high-sensitive negative type of water-developable resist material derived from biomass on hardmask layer for tri-layer processes. A water developable, non-chemically amplified, high sensitive, and negative tone resist material in EB lithography was developed for environmental affair, safety, easiness of handling, and health of the working people, instead of the common developable process of trimethylphenylammonium hydroxide. The images of 200 nm line and 800 nm space pattern with exposure dose of 7.0 μC/cm2 and CF4 etching selectivity of 2.2 with hardmask layer were provided by specific process conditions.

Micro-Slit Collimators for X-Ray/Gamma-Ray Imaging

NASA Technical Reports Server (NTRS)

Appleby, Michael; Fraser, Iain; Klinger, Jill

2011-01-01

A hybrid photochemical-machining process is coupled with precision stack lamination to allow for the fabrication of multiple ultra-high-resolution grids on a single array substrate. In addition, special fixturing and etching techniques have been developed that allow higher-resolution multi-grid collimators to be fabricated. Building on past work of developing a manufacturing technique for fabricating multi-grid, high-resolution coating modulation collimators for arcsecond and subarcsecond x-ray and gamma-ray imaging, the current work reduces the grid pitch by almost a factor of two, down to 22 microns. Additionally, a process was developed for reducing thin, high-Z (tungsten or molybdenum) from the thinnest commercially available foil (25 microns thick) down to approximately equal to 10 microns thick using precisely controlled chemical etching

Fluidized-bed copper oxide process. Phase IV. Conceptual design and economic evaluation, Volume I. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-11-30

Universal Oil Products, Inc. (UOP) of Des Plaines, Illinois has contracted A.E. Roberts & Associates, Inc. (AERA) of Atlanta, Georgia to prepare a sensitivity analysis for the development of the Fluidized-bed Copper Oxide (FBCO) process. As proposed by AERA in September 1991, development of the FBCO process design for a 500 mega-watt (MW) unit was divided into three tasks: (1) Establishment of a Conceptual Design, (2) Conceptual Design, (3) Cost Analysis Task 1 determined the basis for a conceptual design for the 500 megawatt (MW) FBCO process. It was completed by AERA in September of 1992, and a report wasmore » submitted at that time {open_quotes}Establishment of the Design Basis for Application to a 500 MW Coal-fired Facility.{close_quotes} Task 2 gathered all pertinent data available to date and reviewed its applicability to the 500 MW FBCO process. Work on this task was carried out on a joint basis by the AERA team members: Roberts & Schaefers worked on the dense phase transport aspect of the design; Cornell and Carnegie Mellon Universities worked on the design kinetics and modeling; and AERA contributed commercial power and combustion experience. Task 3 provides budgetary cost estimates for the FBCO process and competing alternative technologies for sulfur dioxide and nitrogen oxide removal.« less

Hardfacing of duplex stainless steel using melting and diffusion processes

NASA Astrophysics Data System (ADS)

Lailatul, H.; Maleque, M. A.

2017-03-01

Duplex stainless steel (DSS) is a material with high potential successes in many new applications such as rail car manufacturing, automotive and chemical industries. Although DSS is widely used in various industries, this material has faced wear and hardness problems which obstruct a wider capability of this material and causes problems in current application. Therefore, development of surface modification has been introduced to produce hard protective layer or coating on DSS. The main aim of this work is to brief review on hard surface layer formation on DSS using melting and diffusion processes. Melting technique using tungsten inert gas (TIG) torch and diffusion technique using gas nitriding are the effective process to meet this requirement. The processing route plays a significant role in developing the hard surface layer for any application with effective cost and environmental factors. The good understanding and careful selection of processing route to form products are very important factors to decide the suitable techniques for surface engineering treatment. In this paper, an attempt is also made to consolidate the important research works done on melting and diffusion techniques of DSS in the past. The advantages and disadvantages between melting and diffusion technique are presented for better understanding on the feasibility of hard surface formation on DSS. Finally, it can be concluded that this work will open an avenue for further research on the application of suitable process for hard surface formation on DSS.

Customizing for clients: developing a library liaison program from need to plan.

PubMed

Tennant, M R; Butson, L C; Rezeau, M E; Tucker, P J; Boyle, M E; Clayton, G

2001-01-01

Building on the experiences of librarian representatives to curriculum committees in the colleges of dentistry, medicine, and nursing, the Health Science Center Libraries (HSCL) Strategic Plan recommended the formation of a Library Liaison Work Group to create a formal Library Liaison Program to serve the six Health Science Center (HSC) colleges and several affiliated centers and institutes. The work group's charge was to define the purpose and scope of the program, identify models of best practice, and recommend activities for liaisons. The work group gathered background information, performed an environmental scan, and developed a philosophy statement, a program of liaison activities focusing on seven primary areas, and a forum for liaison communication. Hallmarks of the plan included intensive subject specialization (beyond collection development), extensive communication with users, and personal information services. Specialization was expected to promote competence, communication, confidence, comfort, and customization. Development of the program required close coordination with other strategic plan implementation teams, including teams for collection development, education, and marketing. This paper discusses the HSCL's planning process and the resulting Library Liaison Program. Although focusing on an academic health center, the planning process and liaison model may be applied to any library serving diverse, subject-specific user populations.

Customizing for clients: developing a library liaison program from need to plan*

PubMed Central

Tennant, Michele R.; Butson, Linda C.; Rezeau, Michelle E.; Tucker, Prudence J.; Boyle, Marian E.; Clayton, Greg

2001-01-01

Building on the experiences of librarian representatives to curriculum committees in the colleges of dentistry, medicine, and nursing, the Health Science Center Libraries (HSCL) Strategic Plan recommended the formation of a Library Liaison Work Group to create a formal Library Liaison Program to serve the six Health Science Center (HSC) colleges and several affiliated centers and institutes. The work group's charge was to define the purpose and scope of the program, identify models of best practice, and recommend activities for liaisons. The work group gathered background information, performed an environmental scan, and developed a philosophy statement, a program of liaison activities focusing on seven |primary areas, and a forum for liaison communication. Hallmarks of the plan included intensive subject specialization (beyond collection development), extensive communication with users, and personal information services. Specialization was expected to promote competence, communication, confidence, comfort, and customization. Development of the program required close coordination with other strategic plan implementation teams, including teams for collection development, education, and marketing. This paper discusses the HSCL's planning process and the resulting Library Liaison Program. Although focusing on an academic health center, the planning process and liaison model may be applied to any library serving diverse, subject-specific user populations. PMID:11209807

Ecological Factors in Human Development.

PubMed

Cross, William E

2017-05-01

Urie Bronfenbrenner (1992) helped developmental psychologists comprehend and define "context" as a rich, thick multidimensional construct. His ecological systems theory consists of five layers, and within each layer are developmental processes unique to each layer. The four articles in this section limit the exploration of context to the three innermost systems: the individual plus micro- and macrolayers. Rather than examine both the physical features and processes, the articles tend to focus solely on processes associated with a niche. Processes explored include social identity development, social network dynamics, peer influences, and school-based friendship patterns. The works tend to extend the generalization of extant theory to the developmental experience of various minority group experiences. © 2017 The Authors. Child Development © 2017 Society for Research in Child Development, Inc.

Frontal Electroencephalogram Asymmetry during Affective Processing in Children with Down Syndrome: A Pilot Study

ERIC Educational Resources Information Center

Conrad, N. J.; Schmidt, L. A.; Niccols, A.; Polak, C. P.; Riniolo, T. C.; Burack, J. A.

2007-01-01

Background: Although the pattern of frontal electroencephalogram (EEG) asymmetry during the processing of emotion has been examined in many studies of healthy adults and typically developing infants and children, no published work has used these theoretical and methodological approaches to study emotion processing in children with Down syndrome.…

Information Technology Project Processes: Understanding the Barriers to Improvement and Adoption

ERIC Educational Resources Information Center

Williams, Bernard L.

2009-01-01

Every year, organizations lose millions of dollars due to IT (Information Technology) project failures. Over time, organizations have developed processes and procedures to help reduce the incidence of challenged IT projects. Research has shown that IT project processes can work to help reduce the number of challenged projects. The research in this…

Paradigms of Evaluation in Natural Language Processing: Field Linguistics for Glass Box Testing

ERIC Educational Resources Information Center

Cohen, Kevin Bretonnel

2010-01-01

Although software testing has been well-studied in computer science, it has received little attention in natural language processing. Nonetheless, a fully developed methodology for glass box evaluation and testing of language processing applications already exists in the field methods of descriptive linguistics. This work lays out a number of…

The Promise of NLP and Speech Processing Technologies in Language Assessment

ERIC Educational Resources Information Center

Chapelle, Carol A.; Chung, Yoo-Ree

2010-01-01

Advances in natural language processing (NLP) and automatic speech recognition and processing technologies offer new opportunities for language testing. Despite their potential uses on a range of language test item types, relatively little work has been done in this area, and it is therefore not well understood by test developers, researchers or…

Outcome-Based School-to-Work Transition Planning for Students with Severe Disabilities.

ERIC Educational Resources Information Center

Steere, Daniel E.; And Others

1990-01-01

A transition planning process that focuses on quality-of-life outcomes is presented. The process, which views employment not as an outcome but as a vehicle for the attainment of quality of life, involves six steps: orientation, personal profile development, identification of employment outcomes, measurement system, compatibility process, and…

Effect of spray drying processing parameters on the insecticidal activity of two encapsulated formulations of baculovirus

USDA-ARS?s Scientific Manuscript database

The aim of this work was to evaluate the effect of spray dryer processing parameters on the process yield and insecticidal activity of baculovirus to support the development of this beneficial group of microbes as biopesticides. For each of two baculoviruses [granulovirus (GV) from Pieris rapae (L....

The Architecture, Dynamics, and Development of Mental Processing: Greek, Chinese, or Universal?

ERIC Educational Resources Information Center

Demetriou, A.; Kui, Z.X.; Spanoudis, G.; Christou, C.; Kyriakides, L.; Platsidou, M.

2005-01-01

This study compared Greeks with Chinese, from 8 to 14 years of age, on measures of processing efficiency, working memory, and reasoning. All processes were addressed through three domains of relations: verbal/propositional, quantitative, and visuo/spatial. Structural equations modelling and rating scale analysis showed that the architecture and…

Enhancing Student Learning of Enterprise Integration and Business Process Orientation through an ERP Business Simulation Game

ERIC Educational Resources Information Center

Seethamraju, Ravi

2011-01-01

The sophistication of the integrated world of work and increased recognition of business processes as critical corporate assets require graduates to develop "process orientation" and an "integrated view" of business. Responding to these dynamic changes in business organizations, business schools are also continuing to modify…

GREENSCOPE: A Method for Modeling Chemical Process Sustainability

EPA Science Inventory

Current work within the U.S. Environmental Protection Agency’s National Risk Management Research Laboratory is focused on the development of a method for modeling chemical process sustainability. The GREENSCOPE methodology, defined for the four bases of Environment, Economics, Ef...

Documenting an ISO 9000 Quality System.

ERIC Educational Resources Information Center

Fisher, Barry

1995-01-01

Discusses six steps to follow when documenting an ISO 9000 quality system: using ISO 9000 to develop a quality system, identifying a company's business processes, analyzing the business processes; describing the procedures, writing the quality manual, and working to the documented procedures. (SR)

Dynamic Modeling of Process Technologies for Closed-Loop Water Recovery Systems

NASA Technical Reports Server (NTRS)

Allada, Rama Kumar; Lange, Kevin; Anderson, Molly

2011-01-01

Detailed chemical process simulations are a useful tool in designing and optimizing complex systems and architectures for human life support. Dynamic and steady-state models of these systems help contrast the interactions of various operating parameters and hardware designs, which become extremely useful in trade-study analyses. NASA s Exploration Life Support technology development project recently made use of such models to compliment a series of tests on different waste water distillation systems. This paper presents dynamic simulations of chemical process for primary processor technologies including: the Cascade Distillation System (CDS), the Vapor Compression Distillation (VCD) system, the Wiped-Film Rotating Disk (WFRD), and post-distillation water polishing processes such as the Volatiles Removal Assembly (VRA) that were developed using the Aspen Custom Modeler and Aspen Plus process simulation tools. The results expand upon previous work for water recovery technology models and emphasize dynamic process modeling and results. The paper discusses system design, modeling details, and model results for each technology and presents some comparisons between the model results and available test data. Following these initial comparisons, some general conclusions and forward work are discussed.

Interaction of both plasmas in CO2 laser-MAG hybrid welding of carbon steel

NASA Astrophysics Data System (ADS)

Kutsuna, Muneharu; Chen, Liang

2003-03-01

Researches and developments of laser and arc hybrid welding has been curried out since in 1978. Especially, CO2 laser and TIG hybrid welding has been studied for increasing the penetration depth and welding speed. Recently laser and MIG/MAG/Plasma hybrid welding processes have been developed and applied to industries. It was recognized as a new welding process that promote the flexibility of the process for increasing the penetration depth, welding speed and allowable joint gap and improving the quality of the welds. In the present work, CO2 Laser-MAG hybrid welding of carbon steel (SM490) was investigated to make clear the phenomenon and characteristics of hybrid welding process comparing with laser welding and MAG process. The effects of many process parameters such as welding current, arc voltage, welding speed, defocusing distance, laser-to-arc distance on penetration depth, bead shape, spatter, arc stability and plasma formation were investigated in the present work. Especially, the interaction of laser plasma and MAG arc plasma was considered by changing the laser to arc distance (=DLA).

Prevention Guidance for Isocyanate-Induced Asthma Using Occupational Surveillance Data

PubMed Central

Reeb-Whitaker, Carolyn; Anderson, Naomi J.; Bonauto, David K.

2013-01-01

Data from Washington State's work-related asthma surveillance system were used to characterize isocyanate-induced asthma cases occurring from 1999 through 2010. Injured worker interviews and medical records were used to describe the industry, job title, work process, workers’ compensation cost, and exposure trends associated with 27 cases of isocyanate-induced asthma. The majority (81%) of cases were classified within the surveillance system as new-onset asthma while 19% were classified as work-aggravated asthma. The workers’ compensation cost for isocyanate-induced asthma cases was $1.7 million; this was 14% of the total claims cost for all claims in the asthma surveillance system. The majority of cases (48%) occurred from paint processes, followed by foam application or foam manufacturing (22%). Nine of the asthma cases associated with spray application occurred during application to large or awkward-shaped objects. Six workers who did not directly handle isocyanates (indirect exposure) developed new-onset asthma. Two cases suggest that skin contact and processes secondary to the isocyanate spray application, such as cleanup, contributed to immune sensitization. Surveillance data provide insight for the prevention of isocyanate-induced respiratory disease. Key observations are made regarding the development of work-related asthma in association with a) paint application on large objects difficult to ventilate, b) indirect exposure to isocyanates, c) exposure during secondary or cleanup processes, and d) reports of dermal exposure. PMID:24116665

Prevention guidance for isocyanate-induced asthma using occupational surveillance data.

PubMed

Reeb-Whitaker, Carolyn; Anderson, Naomi J; Bonauto, David K

2013-01-01

Data from Washington State's work-related asthma surveillance system were used to characterize isocyanate-induced asthma cases occurring from 1999 through 2010. Injured worker interviews and medical records were used to describe the industry, job title, work process, workers' compensation cost, and exposure trends associated with 27 cases of isocyanate-induced asthma. The majority (81%) of cases were classified within the surveillance system as new-onset asthma while 19% were classified as work-aggravated asthma. The workers' compensation cost for isocyanate-induced asthma cases was $1.7 million; this was 14% of the total claims cost for all claims in the asthma surveillance system. The majority of cases (48%) occurred from paint processes, followed by foam application or foam manufacturing (22%). Nine of the asthma cases associated with spray application occurred during application to large or awkward-shaped objects. Six workers who did not directly handle isocyanates (indirect exposure) developed new-onset asthma. Two cases suggest that skin contact and processes secondary to the isocyanate spray application, such as cleanup, contributed to immune sensitization. Surveillance data provide insight for the prevention of isocyanate-induced respiratory disease. Key observations are made regarding the development of work-related asthma in association with a) paint application on large objects difficult to ventilate, b) indirect exposure to isocyanates, c) exposure during secondary or cleanup processes, and d) reports of dermal exposure.

[Results and recommendations for vocational rehabilitation from the development project RehaFutur].

PubMed

Riedel, H-P; Schmidt, C; Reinsberg, B; Klügel, T

2012-06-01

The overall project RehaFutur, which has been initiated and funded by the Federal Ministry of Labour and Social Affairs and which involves all the actors of the vocational rehabilitation system, is aimed at advancing the development of the vocational rehabilitation system, so as to prepare it for the challenges ahead. The project started with a group of scientific experts, who formulated 8 fields of action for further developing the vocational rehab system. On this basis, 4 working groups were set up in the framework of a development project to elaborate concrete recommendations on how to implement the necessary changes in vocational rehabilitation. The topics dealt with by the working groups were "self-determination and self-responsibility", "regulation of the overall process", "occupation and working environment" as well as "research". The process was supervised by a steering group, the results were moreover discussed in workshops. Recommendations have been made for 10 subject areas: "consultation and information", "joint service points", "use of the internet", "quality assurance", "individualisation and greater flexibility", "orientation towards the working environment", "participation of the beneficiaries", "research", "legislation", "cooperation of the actors". The next step of the RehaFutur overall project is implementation of those recommendations. This needs to be done in an interdisciplinary manner and conjointly by the agencies and providers involved, including the beneficiaries as experts. As different framework conditions have to be taken into account, the process is a complex one and needs to be supported by systematic research. © Georg Thieme Verlag KG Stuttgart · New York.

Research of aerohydrodynamic and aeroelastic processes on PNRPU HPC system

NASA Astrophysics Data System (ADS)

Modorskii, V. Ya.; Shevelev, N. A.

2016-10-01

Research of aerohydrodynamic and aeroelastic processes with the High Performance Computing Complex in PNIPU is actively conducted within the university priority development direction "Aviation engine and gas turbine technology". Work is carried out in two areas: development and use of domestic software and use of well-known foreign licensed applied software packets. In addition, the third direction associated with the verification of computational experiments - physical modeling, with unique proprietary experimental installations is being developed.

Work activity in the process of recovery - an interpretive phenomenological analysis of the experiences of people with a schizophrenia spectrum diagnosis.

PubMed

Pańczak, Anna; Pietkiewicz, Igor

2016-01-01

Having the opportunity to work has been found meaningful for individuals suffering from severe mental illness, in order to boost their self-esteem, provide a sense of control over their lives and of belonging to a community. There are no studies in Polish literature on the process of recovery from schizophrenia with reference to work activity. The objective of this research was to explore personal experiences of people employed in Vocational Development Centers. Eight semi-structured interviews were conducted with adult patients. Their transcripts were subject to interpretative phenomenological analysis (IPA). Having the opportunity to work was significant for participants because it mobilized them and encouraged self-care. G oing to work helped them overcome social isolation by meeting people with similar difficulties and those who did not suffer from mental illness. Financial gratification enables a sense of independence and the ability to develop skills to plan and control their budget. This study finds that patients who lost their jobs due to mental illness should be encouraged to utilize rehabilitation institutions to help them undertake work activity and use previously acquired qualifications or develop new skills. Access to appropriate psychological support should be provided during vocation reorientation and adaptation into new work environments. This helps patients regain a sense of control and purpose, and cope with losing valued social roles. We also highlight the need for further studies into challenges in the workplace and the strategies patients use to cope with them.

Framework for a New Political Praxis: "Respeto, Dignidad y Conocimiento"

ERIC Educational Resources Information Center

Guajardo, Francisco; Guajardo, Miguel; Oliver, John; Keawe, Lia O'Neill M. A.

2012-01-01

This article uses story as a process to highlight the work in a South Texas community that focuses on the education of youth and the development of community. The work is guided by a new consciousness of place, community engagement, and identity formation. The work is local, but breaking the isolation of youth, families, and ideas has been part of…

Coping with Dying: Lessons That We Should and Should Not Learn from the Work of Elisabeth Kubler-Ross.

ERIC Educational Resources Information Center

Corr, Charles A.

1993-01-01

Appraises work of Elisabeth Kubler-Ross in area of coping with dying. Suggests lessons from that work. Draws broad conclusions about processes involved in coping with dying, argues on behalf of need to develop better theoretical models to explicate what is involved in coping with dying, and suggests requirements for model. (Author/NB)

Characteristics of the Process of Culture Development Project Activities (Culture of Social Engineering) at the Future Bachelors of Social Work

ERIC Educational Resources Information Center

Nikitina, Natalya I.; Romanova, Elena Yu.; Vasilyeva, Tatyana V.; Nikishina, Irina N.; Grebennikova, Veronica M.

2017-01-01

In modern Russia professional activity productivity of social work specialist depends largely on his abilities and skills in the field of social design. University graduate's (social work bachelor`s) high level of professional-project activity culture can be regarded as one of the necessary conditions of successful labour market adaptation of…

A Guide to Writing a Qualitative Systematic Review Protocol to Enhance Evidence-Based Practice in Nursing and Health Care.

PubMed

Butler, Ashleigh; Hall, Helen; Copnell, Beverley

2016-06-01

The qualitative systematic review is a rapidly developing area of nursing research. In order to present trustworthy, high-quality recommendations, such reviews should be based on a review protocol to minimize bias and enhance transparency and reproducibility. Although there are a number of resources available to guide researchers in developing a quantitative review protocol, very few resources exist for qualitative reviews. To guide researchers through the process of developing a qualitative systematic review protocol, using an example review question. The key elements required in a systematic review protocol are discussed, with a focus on application to qualitative reviews: Development of a research question; formulation of key search terms and strategies; designing a multistage review process; critical appraisal of qualitative literature; development of data extraction techniques; and data synthesis. The paper highlights important considerations during the protocol development process, and uses a previously developed review question as a working example. This paper will assist novice researchers in developing a qualitative systematic review protocol. By providing a worked example of a protocol, the paper encourages the development of review protocols, enhancing the trustworthiness and value of the completed qualitative systematic review findings. Qualitative systematic reviews should be based on well planned, peer reviewed protocols to enhance the trustworthiness of results and thus their usefulness in clinical practice. Protocols should outline, in detail, the processes which will be used to undertake the review, including key search terms, inclusion and exclusion criteria, and the methods used for critical appraisal, data extraction and data analysis to facilitate transparency of the review process. Additionally, journals should encourage and support the publication of review protocols, and should require reference to a protocol prior to publication of the review results. © 2016 Sigma Theta Tau International.

Restructuring: A School-Based Plan of Action.

ERIC Educational Resources Information Center

Rothberg, Robert A.; Bozeman, William C.

The processes by which school leaders can institutionalize staff and organizational development, with a focus on initiating school restructuring through team development, are described. Three features are necessary for implementing school restructuring through team development: a deliberate plan for staff involvement, a positive work environment,…

Keeping Up: Change, Currency and Accuracy.

ERIC Educational Resources Information Center

Hull, Darrell; Young, Marion

1999-01-01

Describes the curriculum-morphing process used by the Center for Occupational Research and Development (CORD) to develop curriculum materials in laser electro-optics technology (LEOT). Discusses this innovative developmental project as one in which faculty and curriculum developers work together to resolve the problem of static curriculum…

Data Centric Development Methodology

ERIC Educational Resources Information Center

Khoury, Fadi E.

2012-01-01

Data centric applications, an important effort of software development in large organizations, have been mostly adopting a software methodology, such as a waterfall or Rational Unified Process, as the framework for its development. These methodologies could work on structural, procedural, or object oriented based applications, but fails to capture…

Towards a Human Rights Culture in Social Work Education

PubMed Central

Werkmeister Rozas, Lisa; Garran, Ann Marie

2016-01-01

A human rights perspective must be embedded in the institutions, organisations or agencies where social work students find themselves. This paper will focus on one particular strategy that could be helpful to the process of solidifying a commitment to human rights for our students. Using a pedagogical tool from a school of social work in the USA originally developed to combat the social injustice of racism, the example transcends the academic institution and offers a solid link in connecting human rights, social justice and social work. Using the construct of critical realism, we argue that, for social work programmes to take steps towards an explicit commitment to human rights, not only must human rights be infused throughout the curriculum, but educators must provide opportunities for making more overt the links between human rights principles, social justice and social work. By addressing behaviours, tendencies and attitudes, students then acquire not only the skills and deeper understanding, but they internalise the motivation and commitment to broaden their human rights frame. In the process of developing a more firm commitment to human rights, we must not be limited to the walls of the academy, but rather extend beyond to our field agencies, organisations and communities. PMID:27559204

[Some psychological problems in family planning work].

PubMed

Chen, J

1983-11-29

Psychology has significance in family planning work, because it may promote the scientific nature of family planning work and thus increase its effectiveness. Since people have some common aspects in their psychological process, family planning workers should master some common rules of the people's psychological process in order to understand psychological trends and possible behavior. Through this method, family planning workers may find how to adjust to problems they may encounter in their daily work, such as the worries about a single child being too lonely, spoiled, and hard to handle for the parents, the traditional belief that more children represent good fortune, and more male children may provide security for one's old age. Traditionally, the Chinese people believed that only male children can carry on the family line and that more children will provide a larger labor force, which is beneficial to a family's financial situation. In family planning work, all such incorrect ways of thinking should be corrected and revised. Studies of children's psychology should also be developed so that children may develop a healthy mentality. All these are crucial to the success of family planning work and the promotion of population quality.

Towards a Human Rights Culture in Social Work Education.

PubMed

Werkmeister Rozas, Lisa; Garran, Ann Marie

2016-06-01

A human rights perspective must be embedded in the institutions, organisations or agencies where social work students find themselves. This paper will focus on one particular strategy that could be helpful to the process of solidifying a commitment to human rights for our students. Using a pedagogical tool from a school of social work in the USA originally developed to combat the social injustice of racism, the example transcends the academic institution and offers a solid link in connecting human rights, social justice and social work. Using the construct of critical realism, we argue that, for social work programmes to take steps towards an explicit commitment to human rights, not only must human rights be infused throughout the curriculum, but educators must provide opportunities for making more overt the links between human rights principles, social justice and social work. By addressing behaviours, tendencies and attitudes, students then acquire not only the skills and deeper understanding, but they internalise the motivation and commitment to broaden their human rights frame. In the process of developing a more firm commitment to human rights, we must not be limited to the walls of the academy, but rather extend beyond to our field agencies, organisations and communities.

NASA Procurement Career Development Program

NASA Technical Reports Server (NTRS)

1987-01-01

The NASA Procurement Career Development Program establishes an agency-wide framework for the management of career development activity in the procurement field. Within this framework, installations are encouraged to modify the various components to meet installation-specific mission and organization requirements. This program provides a systematic process for the assessment of and planning for the development, training, and education required to increase the employees' competence in the procurement work functions. It includes the agency-wide basic knowledge and skills by career field and level upon which individual and organizational development plans are developed. Also, it provides a system that is compatible with other human resource management and development systems, processes, and activities. The compatibility and linkage are important in fostering the dual responsibility of the individual and the organization in the career development process.

Modelling the growth process of porous aluminum oxide film during anodization

NASA Astrophysics Data System (ADS)

Aryslanova, E. M.; Alfimov, A. V.; Chivilikhin, S. A.

2015-11-01

Currently it has become important for the development of metamaterials and nanotechnology to obtain regular self-assembled structures. One such structure is porous anodic alumina film that consists of hexagonally packed cylindrical pores. In this work we consider the anodization process, our model takes into account the influence of layers of aluminum and electrolyte on the rate of growth of aluminum oxide, as well as the effect of surface diffusion. In present work we consider those effects. And as a result of our model we obtain the minimum distance between centers of alumina pores in the beginning of anodizing process.

Work and retirement among a cohort of older men in the United States, 1966-1983.

PubMed

Hayward, M D; Grady, W R

1990-08-01

Multivariate increment-decrement working life tables are estimated for a cohort of older men in the United States for the period 1966-1983. The approach taken allows multiple processes to be simultaneously incorporated into a single model, resulting in a more realistic portrayal of a cohort's late-life labor force behavior. In addition, because the life table model is developed from multivariate hazard equations, we identify the effects of sociodemographic characteristics on the potentially complex process by which the labor force career is ended. In contrast to the assumed homogeneity of previous working life table analyses, the present study shows marked differences in labor force mobility and working and nonworking life expectancy according to occupation, class of worker, education, race, and marital status. We briefly discuss the implications of these findings for inequities of access to retirement, private and public pension consumption, and future changes in the retirement process.

The effect of a Lean quality improvement implementation program on surgical pathology specimen accessioning and gross preparation error frequency.

PubMed

Smith, Maxwell L; Wilkerson, Trent; Grzybicki, Dana M; Raab, Stephen S

2012-09-01

Few reports have documented the effectiveness of Lean quality improvement in changing anatomic pathology patient safety. We used Lean methods of education; hoshin kanri goal setting and culture change; kaizen events; observation of work activities, hand-offs, and pathways; A3-problem solving, metric development, and measurement; and frontline work redesign in the accessioning and gross examination areas of an anatomic pathology laboratory. We compared the pre- and post-Lean implementation proportion of near-miss events and changes made in specific work processes. In the implementation phase, we documented 29 individual A3-root cause analyses. The pre- and postimplementation proportions of process- and operator-dependent near-miss events were 5.5 and 1.8 (P < .002) and 0.6 and 0.6, respectively. We conclude that through culture change and implementation of specific work process changes, Lean implementation may improve pathology patient safety.

In-situ Frequency Dependent Dielectric Sensing of Cure

NASA Technical Reports Server (NTRS)

Kranbuehl, David E.

1996-01-01

With the expanding use of polymeric materials as composite matrices, adhesives, coatings and films, the need to develop low cost, automated fabrication processes to produce consistently high quality parts is critical. Essential to the development of reliable, automated, intelligent processing is the ability to continuously monitor the changing state of the polymeric resin in-situ in the fabrication tool. This final report discusses work done on developing dielectric sensing to monitor polymeric material cure and which provides a fundamental understanding of the underlying science for the use of frequency dependent dielectri sensors to monitor the cure process.

Development of cost-effective surfactant flooding technology, Quarterly report, October 1995--December 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pope, G.A.; Sepehrnoori, K.

1995-12-31

The objective of this research is to develop cost-effective surfactant flooding technology by using simulation studies to evaluate and optimize alternative design strategies taking into account reservoir characteristics process chemistry, and process design options such as horizontal wells. Task 1 is the development of an improved numerical method for our simulator that will enable us to solve a wider class of these difficult simulation problems accurately and affordably. Task 2 is the application of this simulator to the optimization of surfactant flooding to reduce its risk and cost. In this quarter, we have continued working on Task 2 to optimizemore » surfactant flooding design and have included economic analysis to the optimization process. An economic model was developed using a spreadsheet and the discounted cash flow (DCF) method of economic analysis. The model was designed specifically for a domestic onshore surfactant flood and has been used to economically evaluate previous work that used a technical approach to optimization. The DCF model outputs common economic decision making criteria, such as net present value (NPV), internal rate of return (IRR), and payback period.« less

The Collaborating States Initiative (CSI) Recommended Process for Developing State Policies and Guidelines to Support Social and Emotional Learning

ERIC Educational Resources Information Center

Dusenbury, Linda; Yoder, Nick

2017-01-01

In the work of the authors with states over the years, they have observed that most follow a similar process when they develop policies or guidelines to support statewide implementation of social and emotional learning (SEL), such as establishing learning goals or standards for student social and emotional competencies, or providing guidance to…

Enery Efficient Press and Sinter of Titanium Powder for Low-Cost Components in Vehicle Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas Zwitter; Phillip Nash; Xiaoyan Xu

2011-03-31

This is the final technical report for the Department of Energy NETL project NT01931 Energy Efficient Press and Sinter of Titanium Powder for Low-Cost Components in Vehicle Applications. Titanium has been identified as one of the key materials with the required strength that can reduce the weight of automotive components and thereby reduce fuel consumption. Working with newly developed sources of titanium powder, Webster-Hoff will develop the processing technology to manufacture low cost vehicle components using the single press/single sinter techniques developed for iron based powder metallurgy today. Working with an automotive or truck manufacturer, Webster-Hoff will demonstrate the feasibilitymore » of manufacturing a press and sinter titanium component for a vehicle application. The project objective is two-fold, to develop the technology for manufacturing press and sinter titanium components, and to demonstrate the feasibility of producing a titanium component for a vehicle application. The lowest cost method for converting metal powder into a net shape part is the Powder Metallurgy Press and Sinter Process. The method involves compaction of the metal powder in a tool (usually a die and punches, upper and lower) at a high pressure (up to 60 TSI or 827 MPa) to form a green compact with the net shape of the final component. The powder in the green compact is held together by the compression bonds between the powder particles. The sinter process then converts the green compact to a metallurgically bonded net shape part through the process of solid state diffusion. The goal of this project is to expand the understanding and application of press and sinter technology to Titanium Powder applications, developing techniques to manufacture net shape Titanium components via the press and sinter process. In addition, working with a vehicle manufacturer, demonstrate the feasibility of producing a titanium component for a vehicle. This is not a research program, but rather a project to develop a process for press and sinter of net shape Titanium components. All of these project objectives have been successfully completed.« less

Geoinformation web-system for processing and visualization of large archives of geo-referenced data

NASA Astrophysics Data System (ADS)

Gordov, E. P.; Okladnikov, I. G.; Titov, A. G.; Shulgina, T. M.

2010-12-01

Developed working model of information-computational system aimed at scientific research in area of climate change is presented. The system will allow processing and analysis of large archives of geophysical data obtained both from observations and modeling. Accumulated experience of developing information-computational web-systems providing computational processing and visualization of large archives of geo-referenced data was used during the implementation (Gordov et al, 2007; Okladnikov et al, 2008; Titov et al, 2009). Functional capabilities of the system comprise a set of procedures for mathematical and statistical analysis, processing and visualization of data. At present five archives of data are available for processing: 1st and 2nd editions of NCEP/NCAR Reanalysis, ECMWF ERA-40 Reanalysis, JMA/CRIEPI JRA-25 Reanalysis, and NOAA-CIRES XX Century Global Reanalysis Version I. To provide data processing functionality a computational modular kernel and class library providing data access for computational modules were developed. Currently a set of computational modules for climate change indices approved by WMO is available. Also a special module providing visualization of results and writing to Encapsulated Postscript, GeoTIFF and ESRI shape files was developed. As a technological basis for representation of cartographical information in Internet the GeoServer software conforming to OpenGIS standards is used. Integration of GIS-functionality with web-portal software to provide a basis for web-portal’s development as a part of geoinformation web-system is performed. Such geoinformation web-system is a next step in development of applied information-telecommunication systems offering to specialists from various scientific fields unique opportunities of performing reliable analysis of heterogeneous geophysical data using approved computational algorithms. It will allow a wide range of researchers to work with geophysical data without specific programming knowledge and to concentrate on solving their specific tasks. The system would be of special importance for education in climate change domain. This work is partially supported by RFBR grant #10-07-00547, SB RAS Basic Program Projects 4.31.1.5 and 4.31.2.7, SB RAS Integration Projects 4 and 9.

Development of manufacturing systems for nanocrystalline and ultra-fine grain materials employing indexing equal channel angular pressing

NASA Astrophysics Data System (ADS)

Hester, Michael Wayne

Nanotechnology offers significant opportunities in providing solutions to existing engineering problems as well as breakthroughs in new fields of science and technology. In order to fully realize benefits from such initiatives, nanomanufacturing methods must be developed to integrate enabling constructs into commercial mainstream. Even though significant advances have been made, widespread industrialization in many areas remains limited. Manufacturing methods, therefore, must continually be developed to bridge gaps between nanoscience discovery and commercialization. A promising technology for integration of top-down nanomanufacturing yet to receive full industrialization is equal channel angular pressing, a process transforming metallic materials into nanostructured or ultra-fine grained materials with significantly improved performance characteristics. To bridge the gap between process potential and actual manufacturing output, a prototype top-down nanomanufacturing system identified as indexing equal channel angular pressing (IX-ECAP) was developed. The unit was designed to capitalize on opportunities of transforming spent or scrap engineering elements into key engineering commodities. A manufacturing system was constructed to impose severe plastic deformation via simple shear in an equal channel angular pressing die on 1100 and 4043 aluminum welding rods. 1/4 fraction factorial split-plot experiments assessed significance of five predictors on the response, microhardness, for the 4043 alloy. Predictor variables included temperature, number of passes, pressing speed, back pressure, and vibration. Main effects were studied employing a resolution III design. Multiple linear regression was used for model development. Initial studies were performed using continuous processing followed by contingency designs involving discrete variable length work pieces. IX-ECAP offered a viable solution in severe plastic deformation processing. Discrete variable length work piece pressing proved very successful. With three passes through the system, 4043 processed material experienced an 88.88% increase in microhardness, 203.4% increase in converted yield strength, and a 98.5% reduction in theoretical final grain size to 103 nanometers using the Hall-Petch relation. The process factor, number of passes, was statistically significant at the 95% confidence level; whereas, temperature was significant at the 90% confidence level. Limitations of system components precluded completion of studies involving continuous pressing. Proposed system redesigns, however, will ensure mainstream commercialization of continuous length work piece processing.