DEFINITIVE SOX CONTROL PROCESS EVALUATIONS: LIMESTONE, DOUBLE ALKALI, AND CITRATE FGD PROCESSES

EPA Science Inventory

The report gives results of a detailed comparative technical and economic evaluation of limestone slurry, generic double alkali, and citrate flue gas desulfurization (FGD) processes, assuming proven technology and using representative power plant, process design, and economic pre...

Process evaluation in a multisite, primary obesity-prevention trial in American Indian schoolchildren1–3

PubMed Central

Helitzer, Deborah L; Davis, Sally M; Gittelsohn, Joel; Going, Scott B; Murray, David M; Snyder, Patricia; Steckler, Allan B

2016-01-01

We describe the development, implementation, and use of the process evaluation component of a multisite, primary obesity prevention trial for American Indian schoolchildren. We describe the development and pilot testing of the instruments, provide some examples of the criteria for instrument selection, and provide examples of how process evaluation results were used to document and refine intervention components. The theoretical and applied framework of the process evaluation was based on diffusion theory, social learning theory, and the desire for triangulation of multiple modes of data collection. The primary objectives of the process evaluation were to systematically document the training process, content, and implementation of 4 components of the intervention. The process evaluation was developed and implemented collaboratively so that it met the needs of both the evaluators and those who would be implementing the intervention components. Process evaluation results revealed that observation and structured interviews provided the most informative data; however, these methods were the most expensive and time consuming and required the highest level of skill to undertake. Although the literature is full of idealism regarding the uses of process evaluation for formative and summative purposes, in reality, many persons are sensitive to having their work evaluated in such an in-depth, context-based manner as is described. For this reason, use of structured, quantitative, highly objective tools may be more effective than qualitative methods, which appear to be more dependent on the skills and biases of the researcher and the context in which they are used. PMID:10195608

Social anhedonia associated with poor evaluative processing but not with poor cognitive control.

PubMed

Martin, Elizabeth A; Kerns, John G

2010-07-30

Emotion researchers have distinguished between automatic vs. controlled processing of evaluative information. There is suggestive evidence that social anhedonia might be associated with problems in controlled evaluative processing. The current study examined whether college students with elevated social anhedonia would exhibit an increased processing effect on tasks involving either evaluative processing or cognitive control. On an evaluative processing task, affective primes and targets could be either congruent or incongruent and participants judged the valence of targets. On a cognitive control task, participants completed the color-naming Stroop task. Compared to control participants (n=47), people with elevated social anhedonia (n=27) exhibited an increased evaluative processing effect as they were slower and made more errors for incongruent than for congruent trials on the evaluative processing task. In contrast, there were no group differences on the Stroop task or on a semantic priming task. Overall, these results suggest that people with elevated social anhedonia might have problems with some aspects of evaluative processing. Copyright 2009 Elsevier Ltd. All rights reserved.

A treatment program for individuals with deficient evaluative processing and consequent impaired social and risk judgement.

PubMed

Park, Norman W; Conrod, Brian; Hussain, Zahra; Murphy, Kelly J; Rewilak, Dmytro; Black, Sandra E

2003-01-01

The current study evaluated the effectiveness of a rehabilitation program developed to assist individuals such as AM who have impaired social and risk judgement. AM's difficulties developed after a severe traumatic brain injury that resulted in bilateral frontal and temporal lobe damage including damage to the amygdala. Previous work (Park et al., 2001) established that AM had impaired automatic processing of negative, but not positive evaluative information, and relatively spared processing of both types of evaluative information when using controlled or strategic processing. In the Strategic Evaluation of Alternatives (SEA) treatment program, AM was trained to compensate for his impairments by explicitly retrieving positive and negative attributes associated with potential actions prior to performing them. The SEA treatment focused specifically on improving AM's ability to obtain financial compensation for his work-related activities. Results showed improved performance on work-related activities and evidence of generalization. Analyses suggested that the process underlying improved performance was compensatory rather than restorative in nature. We discuss the implications of these results for the development of rehabilitation treatment for patients with impaired social and risk judgement.

Process Evaluation Results from the HEALTHY Physical Education Intervention

ERIC Educational Resources Information Center

Hall, William J.; Zeveloff, Abigail; Steckler, Allan; Schneider, Margaret; Thompson, Deborah; Pham, Trang; Volpe, Stella L.; Hindes, Katie; Sleigh, Adriana; McMurray, Robert G.

2012-01-01

Process evaluation is an assessment of the implementation of an intervention. A process evaluation component was embedded in the HEALTHY study, a primary prevention trial for Type 2 diabetes implemented over 3 years in 21 middle schools across the United States. The HEALTHY physical education (PE) intervention aimed at maximizing student…

Content validation using an expert panel: assessment process for assistive technology adopted by farmers with disabilities.

PubMed

Mathew, S N; Field, W E; French, B F

2011-07-01

This article reports the use of an expert panel to perform content validation of an experimental assessment process for the safety of assistive technology (AT) adopted by farmers with disabilities. The validation process was conducted by a panel of six experts experienced in the subject matter, i.e., design, use, and assessment of AT for farmers with disabilities. The exercise included an evaluation session and two focus group sessions. The evaluation session consisted of using the assessment process under consideration by the panel to evaluate a set of nine ATs fabricated by a farmer on his farm site. The expert panel also participated in the focus group sessions conducted immediately before and after the evaluation session. The resulting data were analyzed using discursive analysis, and the results were incorporated into the final assessment process. The method and the results are presented with recommendations for the use of expert panels in research projects and validation of assessment tools.

Teacher Reported Job Satisfaction and Teacher Reported Understanding of the Evaluation Process: An Exploratory Mixed-Methods Case Study of One Urban Public School District

ERIC Educational Resources Information Center

Walsh, Maura

2013-01-01

Although there is wide consensus that teacher evaluation processes should be used to identify and measure effective teaching, this has always been an elusive goal. How teachers perceive the evaluative process is a crucial determiner of how the results of the evaluations are utilized. In 2010, the Massachusetts Department of Elementary and…

Multimethod Strategy for Assessing Program Fidelity: The National Evaluation of the Revised G.R.E.A.T. Program

ERIC Educational Resources Information Center

Esbensen, Finn-Aage; Matsuda, Kristy N.; Taylor, Terrance J.; Peterson, Dana

2011-01-01

This study reports the results of the process evaluation component of the Process and Outcome Evaluation of the Gang Resistance Education and Training (G.R.E.A.T.) program. The process evaluation consisted of multiple methods to assess program fidelity: (a) observations of G.R.E.A.T. Officer Trainings (G.O.T); (b) surveys and interviews of…

Evaluation of a modified pH-shift process to reduce 2-methylisoborneol and geosmin in spiked catfish and produce a consumer acceptable fried catfish nugget-like product.

PubMed

Brown, T M; Cerruto-Noya, C A; Schrader, K K; Kleinholz, C W; DeWitt, C A Mireles

2012-10-01

Muddy and/or musty off-flavors in farmed-raised catfish occur as a result of the absorption of geosmin (GEO) and 2-methylisoborneol (MIB), compounds produced by algae. Previous research suggests the acid pH-shift method may be able to reduce off-flavors to produce a consumer acceptable product. The objective of this research was to evaluate application of the acid pH-shift method using a shaker sieve for protein recovery and to evaluate consumer acceptability of a resultant batter-coated fried nugget-like catfish product. Farm-raised catfish were either allowed to depurate (control) or treated with 1 ppb GEO or MIB. Fillets from each replicate were collected and ground and treated by the acid pH-shift process. Samples from all treatments and replicates were evaluated for residual GEO and MIB. In addition, batter-coated fried catfish samples were prepared for a consumer sensory evaluation. Results demonstrated that the pH-shift process decreased moisture, ash, and collagen content of catfish fillet tissue (P < 0.05). Flavor of control samples was preferred (P < 0.05). Texture of catfish samples treated by the pH-shift process was preferred (P < 0.05). Results demonstrate the pH-shift process can be utilized to reduce off-flavors and increase the acceptability of a processed catfish product. Use of a sieve as an economic alternative for the pH-shift process was evaluated for removing off-flavors from catfish. Difficulties were encountered with regard to protein recovery using the sieve and suggestions are made to, perhaps, make the process more applicable for a sieve-based recovery step. The process as described reduced off-flavors, but only 2-fold suggesting the process would work best on catfish near or just over off-flavor thresholds. Results also indicated the pH-shift process could be used to improve texture of a fried catfish product designed to be similar to chicken nuggets. © 2012 Institute of Food Technologists®

'Healthy Eating and Lifestyle in Pregnancy (HELP)' trial: Process evaluation framework.

PubMed

Simpson, Sharon A; Cassidy, Dunla; John, Elinor

2014-07-01

We developed and tested in a cluster RCT a theory-driven group-based intervention for obese pregnant women. It was designed to support women to moderate weight gain during pregnancy and reduce BMI one year after birth, in addition to targeting secondary health and wellbeing outcomes. In line with MRC guidance on developing and evaluating complex interventions in health, we conducted a process evaluation alongside the trial. This paper describes the development of the process evaluation framework. This cluster RCT recruited 598 pregnant women. Women in the intervention group were invited to attend a weekly weight-management group. Following a review of relevant literature, we developed a process evaluation framework which outlined key process indicators that we wanted to address and how we would measure these. Central to the process evaluation was to understand the mechanism of effect of the intervention. We utilised a logic-modelling approach to describe the intervention which helped us focus on what potential mediators of intervention effect to measure, and how. The resulting process evaluation framework was designed to address 9 core elements; context, reach, exposure, recruitment, fidelity, recruitment, retention, contamination and theory-testing. These were assessed using a variety of qualitative and quantitative approaches. The logic model explained the processes by which intervention components bring about change in target outcomes through various mediators and theoretical pathways including self-efficacy, social support, self-regulation and motivation. Process evaluation is a key element in assessing the effect of any RCT. We developed a process evaluation framework and logic model, and the results of analyses using these will offer insights into why the intervention is or is not effective. Copyright © 2014.

Transit signal priority systems application and technology investigation : final report, March 2009.

DOT National Transportation Integrated Search

2009-03-01

This report describes the process and results of research to develop an evaluation process that will : assist NJ Transit in quickly determining which intersections are good candidates for Transit Signal : Priority (TSP). This evaluation process is ap...

Optimization evaluation of cutting technology based on mechanical parts

NASA Astrophysics Data System (ADS)

Wang, Yu

2018-04-01

The relationship between the mechanical manufacturing process and the carbon emission is studied on the basis of the process of the mechanical manufacturing process. The formula of carbon emission calculation suitable for mechanical manufacturing process is derived. Based on this, a green evaluation method for cold machining process of mechanical parts is proposed. The application verification and data analysis of the proposed evaluation method are carried out by an example. The results show that there is a great relationship between the mechanical manufacturing process data and carbon emissions.

Experimental study of digital image processing techniques for LANDSAT data

NASA Technical Reports Server (NTRS)

Rifman, S. S. (Principal Investigator); Allendoerfer, W. B.; Caron, R. H.; Pemberton, L. J.; Mckinnon, D. M.; Polanski, G.; Simon, K. W.

1976-01-01

The author has identified the following significant results. Results are reported for: (1) subscene registration, (2) full scene rectification and registration, (3) resampling techniques, (4) and ground control point (GCP) extraction. Subscenes (354 pixels x 234 lines) were registered to approximately 1/4 pixel accuracy and evaluated by change detection imagery for three cases: (1) bulk data registration, (2) precision correction of a reference subscene using GCP data, and (3) independently precision processed subscenes. Full scene rectification and registration results were evaluated by using a correlation technique to measure registration errors of 0.3 pixel rms thoughout the full scene. Resampling evaluations of nearest neighbor and TRW cubic convolution processed data included change detection imagery and feature classification. Resampled data were also evaluated for an MSS scene containing specular solar reflections.

Process Evaluation Results from an Environmentally Focused Worksite Weight Management Study

ERIC Educational Resources Information Center

DeJoy, David M.; Wilson, Mark G.; Padilla, Heather M.; Goetzel, Ron Z.; Parker, Kristin B.; Della, Lindsay J.; Roemer, Enid C.

2012-01-01

There is currently much interest in exploring environmental approaches to combat weight gain and obesity. This study presents process evaluation results from a workplace-based study that tested two levels of environmentally focused weight management interventions in a manufacturing setting. The moderate treatment featured a set of relatively…

Process evaluation results from the HEALTHY physical education intervention

PubMed Central

Hall, William J.; Zeveloff, Abigail; Steckler, Allan; Schneider, Margaret; Thompson, Deborah; Pham, Trang; Volpe, Stella L.; Hindes, Katie; Sleigh, Adriana; McMurray, Robert G.

2012-01-01

Process evaluation is an assessment of the implementation of an intervention. A process evaluation component was embedded in the HEALTHY study, a primary prevention trial for Type 2 diabetes implemented over 3 years in 21 middle schools across the United States. The HEALTHY physical education (PE) intervention aimed at maximizing student engagement in moderate-to-vigorous physical activity through delivery of structured lesson plans by PE teachers. Process evaluation data collected via class observations and interventionist interviews assessed fidelity, dose delivered, implementor participation, dose received and barriers. Process evaluation results indicate a high level of fidelity in implementing HEALTHY PE activities and offering 225 min of PE every 10 school days. Concerning dose delivered, students were active for approximately 33 min of class, representing an average of 61% of the class time. Results also indicate that PE teachers were generally engaged in implementing the HEALTHY PE curriculum. Data on dose received showed that students were highly engaged with the PE intervention; however, student misbehavior was the most common barrier observed during classes. Other barriers included teacher disengagement, large classes, limited gym space and poor classroom management. Findings suggest that the PE intervention was generally implemented and received as intended despite several barriers. PMID:22156231

Process evaluation results from the HEALTHY physical education intervention.

PubMed

Hall, William J; Zeveloff, Abigail; Steckler, Allan; Schneider, Margaret; Thompson, Deborah; Pham, Trang; Volpe, Stella L; Hindes, Katie; Sleigh, Adriana; McMurray, Robert G

2012-04-01

Process evaluation is an assessment of the implementation of an intervention. A process evaluation component was embedded in the HEALTHY study, a primary prevention trial for Type 2 diabetes implemented over 3 years in 21 middle schools across the United States. The HEALTHY physical education (PE) intervention aimed at maximizing student engagement in moderate-to-vigorous physical activity through delivery of structured lesson plans by PE teachers. Process evaluation data collected via class observations and interventionist interviews assessed fidelity, dose delivered, implementor participation, dose received and barriers. Process evaluation results indicate a high level of fidelity in implementing HEALTHY PE activities and offering 225 min of PE every 10 school days. Concerning dose delivered, students were active for approximately 33 min of class, representing an average of 61% of the class time. Results also indicate that PE teachers were generally engaged in implementing the HEALTHY PE curriculum. Data on dose received showed that students were highly engaged with the PE intervention; however, student misbehavior was the most common barrier observed during classes. Other barriers included teacher disengagement, large classes, limited gym space and poor classroom management. Findings suggest that the PE intervention was generally implemented and received as intended despite several barriers.

Implementing Impact Evaluations of Malaria Control Interventions: Process, Lessons Learned, and Recommendations

PubMed Central

Hershey, Christine L.; Bhattarai, Achuyt; Florey, Lia S.; McElroy, Peter D.; Nielsen, Carrie F.; Yé, Yazoume; Eckert, Erin; Franca-Koh, Ana Cláudia; Shargie, Estifanos; Komatsu, Ryuichi; Smithson, Paul; Thwing, Julie; Mihigo, Jules; Herrera, Samantha; Taylor, Cameron; Shah, Jui; Mouzin, Eric; Yoon, Steven S.; Salgado, S. René

2017-01-01

Abstract. As funding for malaria control increased considerably over the past 10 years resulting in the expanded coverage of malaria control interventions, so did the need to measure the impact of these investments on malaria morbidity and mortality. Members of the Roll Back Malaria (RBM) Partnership undertook impact evaluations of malaria control programs at a time when there was little guidance in terms of the process for conducting an impact evaluation of a national-level malaria control program. The President’s Malaria Initiative (PMI), as a member of the RBM Partnership, has provided financial and technical support for impact evaluations in 13 countries to date. On the basis of these experiences, PMI and its partners have developed a streamlined process for conducting the evaluations with a set of lessons learned and recommendations. Chief among these are: to ensure country ownership and involvement in the evaluations; to engage stakeholders throughout the process; to coordinate evaluations among interested partners to avoid duplication of efforts; to tailor the evaluation to the particular country context; to develop a standard methodology for the evaluations and a streamlined process for completion within a reasonable time; and to develop tailored dissemination products on the evaluation for a broad range of stakeholders. These key lessons learned and resulting recommendations will guide future impact evaluations of malaria control programs and other health programs. PMID:28990921

Study on loading path optimization of internal high pressure forming process

NASA Astrophysics Data System (ADS)

Jiang, Shufeng; Zhu, Hengda; Gao, Fusheng

2017-09-01

In the process of internal high pressure forming, there is no formula to describe the process parameters and forming results. The article use numerical simulation to obtain several input parameters and corresponding output result, use the BP neural network to found their mapping relationship, and with weighted summing method make each evaluating parameters to set up a formula which can evaluate quality. Then put the training BP neural network into the particle swarm optimization, and take the evaluating formula of the quality as adapting formula of particle swarm optimization, finally do the optimization and research at the range of each parameters. The results show that the parameters obtained by the BP neural network algorithm and the particle swarm optimization algorithm can meet the practical requirements. The method can solve the optimization of the process parameters in the internal high pressure forming process.

EVALUATION OF REGISTRATION, COMPRESSION AND CLASSIFICATION ALGORITHMS

NASA Technical Reports Server (NTRS)

Jayroe, R. R.

1994-01-01

Several types of algorithms are generally used to process digital imagery such as Landsat data. The most commonly used algorithms perform the task of registration, compression, and classification. Because there are different techniques available for performing registration, compression, and classification, imagery data users need a rationale for selecting a particular approach to meet their particular needs. This collection of registration, compression, and classification algorithms was developed so that different approaches could be evaluated and the best approach for a particular application determined. Routines are included for six registration algorithms, six compression algorithms, and two classification algorithms. The package also includes routines for evaluating the effects of processing on the image data. This collection of routines should be useful to anyone using or developing image processing software. Registration of image data involves the geometrical alteration of the imagery. Registration routines available in the evaluation package include image magnification, mapping functions, partitioning, map overlay, and data interpolation. The compression of image data involves reducing the volume of data needed for a given image. Compression routines available in the package include adaptive differential pulse code modulation, two-dimensional transforms, clustering, vector reduction, and picture segmentation. Classification of image data involves analyzing the uncompressed or compressed image data to produce inventories and maps of areas of similar spectral properties within a scene. The classification routines available include a sequential linear technique and a maximum likelihood technique. The choice of the appropriate evaluation criteria is quite important in evaluating the image processing functions. The user is therefore given a choice of evaluation criteria with which to investigate the available image processing functions. All of the available evaluation criteria basically compare the observed results with the expected results. For the image reconstruction processes of registration and compression, the expected results are usually the original data or some selected characteristics of the original data. For classification processes the expected result is the ground truth of the scene. Thus, the comparison process consists of determining what changes occur in processing, where the changes occur, how much change occurs, and the amplitude of the change. The package includes evaluation routines for performing such comparisons as average uncertainty, average information transfer, chi-square statistics, multidimensional histograms, and computation of contingency matrices. This collection of routines is written in FORTRAN IV for batch execution and has been implemented on an IBM 360 computer with a central memory requirement of approximately 662K of 8 bit bytes. This collection of image processing and evaluation routines was developed in 1979.

Embodied simulation as part of affective evaluation processes: task dependence of valence concordant EMG activity.

PubMed

Weinreich, André; Funcke, Jakob Maria

2014-01-01

Drawing on recent findings, this study examines whether valence concordant electromyography (EMG) responses can be explained as an unconditional effect of mere stimulus processing or as somatosensory simulation driven by task-dependent processing strategies. While facial EMG over the Corrugator supercilii and the Zygomaticus major was measured, each participant performed two tasks with pictures of album covers. One task was an affective evaluation task and the other was to attribute the album covers to one of five decades. The Embodied Emotion Account predicts that valence concordant EMG is more likely to occur if the task necessitates a somatosensory simulation of the evaluative meaning of stimuli. Results support this prediction with regard to Corrugator supercilii in that valence concordant EMG activity was only present in the affective evaluation task but not in the non-evaluative task. Results for the Zygomaticus major were ambiguous. Our findings are in line with the view that EMG activity is an embodied part of the evaluation process and not a mere physical outcome.

Process Use as a Usefulism

ERIC Educational Resources Information Center

Patton, Michael Quinn

2007-01-01

Process use refers to changes in attitude, thinking, and behavior that result from participating in an evaluation. Process use includes individual learnings from evaluation involvement as well as effects on program functioning and organizational culture. The "Encyclopedia of Social Science Research Methods," in an entry on operationalization,…

Optimization of High-Dimensional Functions through Hypercube Evaluation

PubMed Central

Abiyev, Rahib H.; Tunay, Mustafa

2015-01-01

A novel learning algorithm for solving global numerical optimization problems is proposed. The proposed learning algorithm is intense stochastic search method which is based on evaluation and optimization of a hypercube and is called the hypercube optimization (HO) algorithm. The HO algorithm comprises the initialization and evaluation process, displacement-shrink process, and searching space process. The initialization and evaluation process initializes initial solution and evaluates the solutions in given hypercube. The displacement-shrink process determines displacement and evaluates objective functions using new points, and the search area process determines next hypercube using certain rules and evaluates the new solutions. The algorithms for these processes have been designed and presented in the paper. The designed HO algorithm is tested on specific benchmark functions. The simulations of HO algorithm have been performed for optimization of functions of 1000-, 5000-, or even 10000 dimensions. The comparative simulation results with other approaches demonstrate that the proposed algorithm is a potential candidate for optimization of both low and high dimensional functions. PMID:26339237

Method of evaluation of process of red blood cell sedimentation based on photometry of droplet samples.

PubMed

Aristov, Alexander; Nosova, Ekaterina

2017-04-01

The paper focuses on research aimed at creating and testing a new approach to evaluate the processes of aggregation and sedimentation of red blood cells for purpose of its use in clinical laboratory diagnostics. The proposed method is based on photometric analysis of blood sample formed as a sessile drop. The results of clinical approbation of this method are given in the paper. Analysis of the processes occurring in the sample in the form of sessile drop during the process of blood cells sedimentation is described. The results of experimental studies to evaluate the effect of the droplet sample focusing properties on light radiation transmittance are presented. It is shown that this method significantly reduces the sample volume and provides sufficiently high sensitivity to the studied processes.

Towards Systematic Benchmarking of Climate Model Performance

NASA Astrophysics Data System (ADS)

Gleckler, P. J.

2014-12-01

The process by which climate models are evaluated has evolved substantially over the past decade, with the Coupled Model Intercomparison Project (CMIP) serving as a centralizing activity for coordinating model experimentation and enabling research. Scientists with a broad spectrum of expertise have contributed to the CMIP model evaluation process, resulting in many hundreds of publications that have served as a key resource for the IPCC process. For several reasons, efforts are now underway to further systematize some aspects of the model evaluation process. First, some model evaluation can now be considered routine and should not require "re-inventing the wheel" or a journal publication simply to update results with newer models. Second, the benefit of CMIP research to model development has not been optimal because the publication of results generally takes several years and is usually not reproducible for benchmarking newer model versions. And third, there are now hundreds of model versions and many thousands of simulations, but there is no community-based mechanism for routinely monitoring model performance changes. An important change in the design of CMIP6 can help address these limitations. CMIP6 will include a small set standardized experiments as an ongoing exercise (CMIP "DECK": ongoing Diagnostic, Evaluation and Characterization of Klima), so that modeling groups can submit them at any time and not be overly constrained by deadlines. In this presentation, efforts to establish routine benchmarking of existing and future CMIP simulations will be described. To date, some benchmarking tools have been made available to all CMIP modeling groups to enable them to readily compare with CMIP5 simulations during the model development process. A natural extension of this effort is to make results from all CMIP simulations widely available, including the results from newer models as soon as the simulations become available for research. Making the results from routine performance tests readily accessible will help advance a more transparent model evaluation process.

GoActive: a protocol for the mixed methods process evaluation of a school-based physical activity promotion programme for 13-14year old adolescents.

PubMed

Jong, Stephanie T; Brown, Helen Elizabeth; Croxson, Caroline H D; Wilkinson, Paul; Corder, Kirsten L; van Sluijs, Esther M F

2018-05-21

Process evaluations are critical for interpreting and understanding outcome trial results. By understanding how interventions function across different settings, process evaluations have the capacity to inform future dissemination of interventions. The complexity of Get others Active (GoActive), a 12-week, school-based physical activity intervention implemented in eight schools, highlights the need to investigate how implementation is achieved across a variety of school settings. This paper describes the mixed methods GoActive process evaluation protocol that is embedded within the outcome evaluation. In this detailed process evaluation protocol, we describe the flexible and pragmatic methods that will be used for capturing the process evaluation data. A mixed methods design will be used for the process evaluation, including quantitative data collected in both the control and intervention arms of the GoActive trial, and qualitative data collected in the intervention arm. Data collection methods will include purposively sampled, semi-structured interviews and focus group interviews, direct observation, and participant questionnaires (completed by students, teachers, older adolescent mentors, and local authority-funded facilitators). Data will be analysed thematically within and across datasets. Overall synthesis of findings will address the process of GoActive implementation, and through which this process affects outcomes, with careful attention to the context of the school environment. This process evaluation will explore the experience of participating in GoActive from the perspectives of key groups, providing a greater understanding of the acceptability and process of implementation of the intervention across the eight intervention schools. This will allow for appraisal of the intervention's conceptual base, inform potential dissemination, and help optimise post-trial sustainability. The process evaluation will also assist in contextualising the trial effectiveness results with respect to how the intervention may or may not have worked and, if it was found to be effective, what might be required for it to be sustained in the 'real world'. Furthermore, it will offer suggestions for the development and implementation of future initiatives to promote physical activity within schools. ISRCTN, ISRCTN31583496 . Registered on 18 February 2014.

Quantitative evaluation method of the bubble structure of sponge cake by using morphology image processing

NASA Astrophysics Data System (ADS)

Tatebe, Hironobu; Kato, Kunihito; Yamamoto, Kazuhiko; Katsuta, Yukio; Nonaka, Masahiko

2005-12-01

Now a day, many evaluation methods for the food industry by using image processing are proposed. These methods are becoming new evaluation method besides the sensory test and the solid-state measurement that are using for the quality evaluation. An advantage of the image processing is to be able to evaluate objectively. The goal of our research is structure evaluation of sponge cake by using image processing. In this paper, we propose a feature extraction method of the bobble structure in the sponge cake. Analysis of the bubble structure is one of the important properties to understand characteristics of the cake from the image. In order to take the cake image, first we cut cakes and measured that's surface by using the CIS scanner. Because the depth of field of this type scanner is very shallow, the bubble region of the surface has low gray scale values, and it has a feature that is blur. We extracted bubble regions from the surface images based on these features. First, input image is binarized, and the feature of bubble is extracted by the morphology analysis. In order to evaluate the result of feature extraction, we compared correlation with "Size of the bubble" of the sensory test result. From a result, the bubble extraction by using morphology analysis gives good correlation. It is shown that our method is as well as the subjectivity evaluation.

SU-F-T-475: An Evaluation of the Overlap Between the Acceptance Testing and Commissioning Processes for Conventional Medical Linear Accelerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morrow, A; Rangaraj, D; Perez-Andujar, A

2016-06-15

Purpose: This work’s objective is to determine the overlap of processes, in terms of sub-processes and time, between acceptance testing and commissioning of a conventional medical linear accelerator and to evaluate the time saved by consolidating the two processes. Method: A process map for acceptance testing for medical linear accelerators was created from vendor documentation (Varian and Elekta). Using AAPM TG-106 and inhouse commissioning procedures, a process map was created for commissioning of said accelerators. The time to complete each sub-process in each process map was evaluated. Redundancies in the processes were found and the time spent on each weremore » calculated. Results: Mechanical testing significantly overlaps between the two processes - redundant work here amounts to 9.5 hours. Many beam non-scanning dosimetry tests overlap resulting in another 6 hours of overlap. Beam scanning overlaps somewhat - acceptance tests include evaluating PDDs and multiple profiles but for only one field size while commissioning beam scanning includes multiple field sizes and depths of profiles. This overlap results in another 6 hours of rework. Absolute dosimetry, field outputs, and end to end tests are not done at all in acceptance testing. Finally, all imaging tests done in acceptance are repeated in commissioning, resulting in about 8 hours of rework. The total time overlap between the two processes is about 30 hours. Conclusion: The process mapping done in this study shows that there are no tests done in acceptance testing that are not also recommended to do for commissioning. This results in about 30 hours of redundant work when preparing a conventional linear accelerator for clinical use. Considering these findings in the context of the 5000 linacs in the United states, consolidating acceptance testing and commissioning would have allowed for the treatment of an additional 25000 patients using no additional resources.« less

Grey Comprehensive Evaluation of Biomass Power Generation Project Based on Group Judgement

NASA Astrophysics Data System (ADS)

Xia, Huicong; Niu, Dongxiao

2017-06-01

The comprehensive evaluation of benefit is an important task needed to be carried out at all stages of biomass power generation projects. This paper proposed an improved grey comprehensive evaluation method based on triangle whiten function. To improve the objectivity of weight calculation result of only reference comparison judgment method, this paper introduced group judgment to the weighting process. In the process of grey comprehensive evaluation, this paper invited a number of experts to estimate the benefit level of projects, and optimized the basic estimations based on the minimum variance principle to improve the accuracy of evaluation result. Taking a biomass power generation project as an example, the grey comprehensive evaluation result showed that the benefit level of this project was good. This example demonstrates the feasibility of grey comprehensive evaluation method based on group judgment for benefit evaluation of biomass power generation project.

Process service quality evaluation based on Dempster-Shafer theory and support vector machine.

PubMed

Pei, Feng-Que; Li, Dong-Bo; Tong, Yi-Fei; He, Fei

2017-01-01

Human involvement influences traditional service quality evaluations, which triggers an evaluation's low accuracy, poor reliability and less impressive predictability. This paper proposes a method by employing a support vector machine (SVM) and Dempster-Shafer evidence theory to evaluate the service quality of a production process by handling a high number of input features with a low sampling data set, which is called SVMs-DS. Features that can affect production quality are extracted by a large number of sensors. Preprocessing steps such as feature simplification and normalization are reduced. Based on three individual SVM models, the basic probability assignments (BPAs) are constructed, which can help the evaluation in a qualitative and quantitative way. The process service quality evaluation results are validated by the Dempster rules; the decision threshold to resolve conflicting results is generated from three SVM models. A case study is presented to demonstrate the effectiveness of the SVMs-DS method.

Meta-Evaluation Applied To Results Of ITS Initiatives

DOT National Transportation Integrated Search

1995-04-01

META-EVALUATION : META-EVALUATION IS A PROCESS TO BE USED FOR THE COMPARISON OF RESULTS ACROSS INTELLIGENT TRANSPORTATION SYSTEMS (ITS). OPERATIONAL TESTS, A COMPONENT OF THE ITS PROGRAM ADMINISTERED BY THE FEDERAL HIGHWAY ADMINISTRATION (FHWA), A...

Differential Effects of Motor Efference Copies and Proprioceptive Information on Response Evaluation Processes

PubMed Central

Stock, Ann-Kathrin; Wascher, Edmund; Beste, Christian

2013-01-01

It is well-kown that sensory information influences the way we execute motor responses. However, less is known about if and how sensory and motor information are integrated in the subsequent process of response evaluation. We used a modified Simon Task to investigate how these streams of information are integrated in response evaluation processes, applying an in-depth neurophysiological analysis of event-related potentials (ERPs), time-frequency decomposition and sLORETA. The results show that response evaluation processes are differentially modulated by afferent proprioceptive information and efference copies. While the influence of proprioceptive information is mediated via oscillations in different frequency bands, efference copy based information about the motor execution is specifically mediated via oscillations in the theta frequency band. Stages of visual perception and attention were not modulated by the interaction of proprioception and motor efference copies. Brain areas modulated by the interactive effects of proprioceptive and efference copy based information included the middle frontal gyrus and the supplementary motor area (SMA), suggesting that these areas integrate sensory information for the purpose of response evaluation. The results show how motor response evaluation processes are modulated by information about both the execution and the location of a response. PMID:23658624

The Principal's Role in the Post-Evaluation Process.--How Does the Principal Engage in the Work Carried out after the Schools Self-Evaluation?

ERIC Educational Resources Information Center

Emstad, Anne Berit

2011-01-01

This article refers to a study on how the school principal engaged in the process after a school self-evaluation. The study examined how two primary schools followed up the evaluation. Although they both used the same evaluation tool, the schools' understanding and application of results differed greatly. This paper describes and discusses the…

How product trial changes quality perception of four new processed beef products.

PubMed

Saeed, Faiza; Grunert, Klaus G; Therkildsen, Margrethe

2013-01-01

The purpose of this paper is the quantitative analysis of the change in quality perception of four new processed beef products from pre to post trial phases. Based on the Total Food Quality Model, differences in pre and post-trial phases were measured using repeated measures technique for cue evaluation, quality evaluation and purchase motive fulfillment. For two of the tested products, trial resulted in a decline of the evaluation of cues, quality and purchase motive fulfillment compared to pre-trial expectations. For these products, positive expectations were created by giving information about ingredients and ways of processing, which were not confirmed during trial. For the other two products, evaluations on key sensory dimensions based on trial exceeded expectations, whereas the other evaluations remained unchanged. Several demographic factors influenced the pattern of results, notably age and gender, which may be due to underlying differences in previous experience. The study gives useful insights for testing of new processed meat products before market introduction. Copyright © 2012 Elsevier Ltd. All rights reserved.

Non-formal educator use of evaluation results.

PubMed

Baughman, Sarah; Boyd, Heather H; Franz, Nancy K

2012-08-01

Increasing demands for accountability in educational programming have resulted in increasing calls for program evaluation in educational organizations. Many organizations include conducting program evaluations as part of the job responsibilities of program staff. Cooperative Extension is a complex organization offering non-formal educational programs through land grant universities. Many Extension services require non-formal educational program evaluations be conducted by field-based Extension educators. Evaluation research has focused primarily on the efforts of professional, external evaluators. The work of program staff with many responsibilities including program evaluation has received little attention. This study examined how field based Extension educators (i.e. program staff) in four Extension services use the results of evaluations of programs that they have conducted themselves. Four types of evaluation use are measured and explored; instrumental use, conceptual use, persuasive use and process use. Results indicate that there are few programmatic changes as a result of evaluation findings among the non-formal educators surveyed in this study. Extension educators tend to use evaluation results to persuade others about the value of their programs and learn from the evaluation process. Evaluation use is driven by accountability measures with very little program improvement use as measured in this study. Practical implications include delineating accountability and program improvement tasks within complex organizations in order to align evaluation efforts and to improve the results of both. There is some evidence that evaluation capacity building efforts may be increasing instrumental use by educators evaluating their own programs. Copyright © 2011 Elsevier Ltd. All rights reserved.

Rigor + Results = Impact: Measuring Impact with Integrity (Invited)

NASA Astrophysics Data System (ADS)

Davis, H. B.; Scalice, D.

2013-12-01

Are you struggling to measure and explain the impact of your EPO efforts? The NASA Astrobiology Institute (NAI) is using an evaluation process to determine the impact of its 15 EPO projects with over 200 activities. What is the current impact? How can it be improved in the future? We have developed a process that preserves autonomy at the project implementation level while still painting a picture of the entire portfolio. The impact evaluation process looks at an education/public outreach activity through its entire project cycle. Working with an external evaluator, education leads: 1) rate the quality/health of an activity in each stage of its cycle, and 2) determine the impact based on the results of the evaluation and the rigor of the methods used. The process has created a way to systematically codify a project's health and its impact, while offering support for improving both impact and how it is measured.

Using experimental design modules for process characterization in manufacturing/materials processes laboratories

NASA Technical Reports Server (NTRS)

Ankenman, Bruce; Ermer, Donald; Clum, James A.

1994-01-01

Modules dealing with statistical experimental design (SED), process modeling and improvement, and response surface methods have been developed and tested in two laboratory courses. One course was a manufacturing processes course in Mechanical Engineering and the other course was a materials processing course in Materials Science and Engineering. Each module is used as an 'experiment' in the course with the intent that subsequent course experiments will use SED methods for analysis and interpretation of data. Evaluation of the modules' effectiveness has been done by both survey questionnaires and inclusion of the module methodology in course examination questions. Results of the evaluation have been very positive. Those evaluation results and details of the modules' content and implementation are presented. The modules represent an important component for updating laboratory instruction and to provide training in quality for improved engineering practice.

Teacher Perceptions Regarding Portfolio-Based Components of Teacher Evaluations

ERIC Educational Resources Information Center

Nagel, Charles I.

2012-01-01

This study reports the results of teachers' and principals' perceptions of the package evaluation process, a process that uses a combination of a traditional evaluation with a portfolio-based assessment tool. In addition, this study contributes to the educational knowledge base by exploring the participants' views on the impact of…

The Practice of Health Program Evaluation.

PubMed

Lewis, Sarah R

2017-11-01

The Practice of Health Program Evaluation provides an overview of the evaluation process for public health programs while diving deeper to address select advanced concepts and techniques. The book unfolds evaluation as a three-phased process consisting of identification of evaluation questions, data collection and analysis, and dissemination of results and recommendations. The text covers research design, sampling methods, as well as quantitative and qualitative approaches. Types of evaluation are also discussed, including economic assessment and systems research as relative newcomers. Aspects critical to conducting a successful evaluation regardless of type or research design are emphasized, such as stakeholder engagement, validity and reliability, and adoption of sound recommendations. The book encourages evaluators to document their approach by developing an evaluation plan, a data analysis plan, and a dissemination plan, in order to help build consensus throughout the process. The evaluative text offers a good bird's-eye view of the evaluation process, while offering guidance for evaluation experts on how to navigate political waters and advocate for their findings to help affect change.

Using experts feedback in clinical case resolution and arbitration as accuracy diagnosis methodology.

PubMed

Rodríguez-González, Alejandro; Torres-Niño, Javier; Valencia-Garcia, Rafael; Mayer, Miguel A; Alor-Hernandez, Giner

2013-09-01

This paper proposes a new methodology for assessing the efficiency of medical diagnostic systems and clinical decision support systems by using the feedback/opinions of medical experts. The methodology behind this work is based on a comparison between the expert feedback that has helped solve different clinical cases and the expert system that has evaluated these same cases. Once the results are returned, an arbitration process is carried out in order to ensure the correctness of the results provided by both methods. Once this process has been completed, the results are analyzed using Precision, Recall, Accuracy, Specificity and Matthews Correlation Coefficient (MCC) (PRAS-M) metrics. When the methodology is applied, the results obtained from a real diagnostic system allow researchers to establish the accuracy of the system based on objective facts. The methodology returns enough information to analyze the system's behavior for each disease in the knowledge base or across the entire knowledge base. It also returns data on the efficiency of the different assessors involved in the evaluation process, analyzing their behavior in the diagnostic process. The proposed work facilitates the evaluation of medical diagnostic systems, having a reliable process based on objective facts. The methodology presented in this research makes it possible to identify the main characteristics that define a medical diagnostic system and their values, allowing for system improvement. A good example of the results provided by the application of the methodology is shown in this paper. A diagnosis system was evaluated by means of this methodology, yielding positive results (statistically significant) when comparing the system with the assessors that participated in the evaluation process of the system through metrics such as recall (+27.54%) and MCC (+32.19%). These results demonstrate the real applicability of the methodology used. Copyright © 2013 Elsevier Ltd. All rights reserved.

Software component quality evaluation

NASA Technical Reports Server (NTRS)

Clough, A. J.

1991-01-01

The paper describes a software inspection process that can be used to evaluate the quality of software components. Quality criteria, process application, independent testing of the process and proposed associated tool support are covered. Early results indicate that this technique is well suited for assessing software component quality in a standardized fashion. With automated machine assistance to facilitate both the evaluation and selection of software components, such a technique should promote effective reuse of software components.

Fear of negative evaluation modulates electrocortical and behavioral responses when anticipating social evaluative feedback.

PubMed

Van der Molen, Melle J W; Poppelaars, Eefje S; Van Hartingsveldt, Caroline T A; Harrewijn, Anita; Gunther Moor, Bregtje; Westenberg, P Michiel

2013-01-01

Cognitive models posit that the fear of negative evaluation (FNE) is a hallmark feature of social anxiety. As such, individuals with high FNE may show biased information processing when faced with social evaluation. The aim of the current study was to examine the neural underpinnings of anticipating and processing social-evaluative feedback, and its correlates with FNE. We used a social judgment paradigm in which female participants (N = 31) were asked to indicate whether they believed to be socially accepted or rejected by their peers. Anticipatory attention was indexed by the stimulus preceding negativity (SPN), while the feedback-related negativity and P3 were used to index the processing of social-evaluative feedback. Results provided evidence of an optimism bias in social peer evaluation, as participants more often predicted to be socially accepted than rejected. Participants with high levels of FNE needed more time to provide their judgments about the social-evaluative outcome. While anticipating social-evaluative feedback, SPN amplitudes were larger for anticipated social acceptance than for social rejection feedback. Interestingly, the SPN during anticipated social acceptance was larger in participants with high levels of FNE. None of the feedback-related brain potentials correlated with the FNE. Together, the results provided evidence of biased information processing in individuals with high levels of FNE when anticipating (rather than processing) social-evaluative feedback. The delayed response times in high FNE individuals were interpreted to reflect augmented vigilance imposed by the upcoming social-evaluative threat. Possibly, the SPN constitutes a neural marker of this vigilance in females with higher FNE levels, particularly when anticipating social acceptance feedback.

Setting priorities for safe motherhood programme evaluation: a participatory process in three developing countries.

PubMed

Madi, Banyana Cecilia; Hussein, Julia; Hounton, Sennen; D'Ambruoso, Lucia; Achadi, Endang; Arhinful, Daniel Kojo

2007-09-01

A participatory approach to priority setting in programme evaluation may help improve the allocation and more efficient use of scarce resources especially in low-income countries. Research agendas that are the result of collaboration between researchers, programme managers, policy makers and other stakeholders have the potential to ensure rigorous studies are conducted on matters of local priority, based on local, expert knowledge. This paper describes a process involving key stakeholders to elicit and prioritise evaluation needs for safe motherhood in three developing countries. A series of reiterative consultations with safe motherhood stakeholders from each country was conducted over a period of 36 months. In each country, the consultation process consisted of a series of participatory workshops; firstly, stakeholder's views on evaluation were elicited with parallel descriptive work on the contexts. Secondly, priorities for evaluation were identified from stakeholders; thirdly, the evaluation-priorities were refined; and finally, the evaluation research questions, reflecting the identified priorities, were agreed and finalised. Three evaluation-questions were identified in each country, and one selected, on which a full scale evaluation was undertaken. While there is a great deal written about the importance of transparent and participatory priority setting in evaluation; few examples of how such processes could be implemented exist, particularly for maternal health programmes. Our experience demonstrates that the investment in a participatory priority-setting effort is high but the process undertaken resulted in both globally and contextually-relevant priorities for evaluation. This experience provides useful lessons for public health practitioners committed to bridging the research-policy interface.

The OPERA trial: a protocol for the process evaluation of a randomised trial of an exercise intervention for older people in residential and nursing accommodation

PubMed Central

2011-01-01

Background The OPERA trial is large cluster randomised trial testing a physical activity intervention to address depression amongst people living in nursing and residential homes for older people. A process evaluation was commissioned alongside the trial and we report the protocol for this process evaluation. Challenges included the cognitive and physical ability of the participants, the need to respect the privacy of all home residents, including study non-participants, and the physical structure of the homes. Evaluation activity had to be organised around the structured timetable of homes, leaving limited opportunities for data collection. The aims of this process evaluation are to provide findings that will assist in the interpretation of the clinical trial results, and to inform potential implementation of the physical activity intervention on a wider scale. Methods/design Quantitative data on recruitment of homes and individuals is being collected. For homes in the intervention arm, data on dose and fidelity of the intervention delivered; including individual rates of participation in exercise classes are collected. In the control homes, uptake and delivery of depression awareness training is monitored. These data will be combined with qualitative data from an in-depth study of a purposive sample of eight homes (six intervention and two control). Discussion Although process evaluations are increasingly funded alongside trials, it is still rare to see the findings published, and even rarer to see the protocol for such an evaluation published. Process evaluations have the potential to assist in interpreting and understanding trial results as well as informing future roll-outs of interventions. If such evaluations are funded they should also be reported and reviewed in a similar way to the trial outcome evaluation. Trial Registration ISRCTN No: ISRCTN43769277 PMID:21288341

[Analysis of evaluation process of research projects submitted to the Fondo de Investigación Sanitaria, Spain].

PubMed

Prieto Carles, C; Gómez-Gerique, J; Gutiérrez Millet, V; Veiga de Cabo, J; Sanz Martul, E; Mendoza Hernández, J L

2000-10-07

At the present time it seems very clear that research improvement is both an unquestionable fact and the right way to develop technological innovation, services and patents. However, such improvement and corresponding finances needs to be done under fine and rigorous evaluation process as an assessment tool under which all the research projects applying to a public or private call for proposals should be submitted to assure a coherence point according to the investment to be made. At this end, the main target of this work has been focused to analysis and study the evaluation process traditionally made by Fondo de Investigación Sanitaria (FIS) as well as to propose most adequate modifications. A sample of 431 research projects corresponding to year 1998 proposal was analysed. The evaluation from FIS and ANEP (National Evaluation and Prospective Agency) was evaluated and scored (evaluation quality) in its main contents by 3 independent evaluators, the showed results submitted to a comparative frame between these agencies at indoor (FIS) and outdoor (FIS/ANEP) level. FIS evaluation had 20 commissions or areas of knowledge. The analysis indoor (FIS) clearly showed that evaluation quality was correlated to the assigned commission (F = 3.71; p < 0.001) and to the time last of the researched proposal (F = 3.42; p < 0.05) but no related to the evaluator. On the other hand, the quality of ANEP evaluation showed a correlated dependency of the three mentioned facts. In all terms, the ANEP evaluation was better than FIS for the three years time projects, but in did not show significant differences in one or two years time projects. In all cases, the evaluation with final results as negative (financing denied) showed an average quality higher than positive evaluation. The obtained results advice about the convenience of making some changes in the evaluative structure and to review the sort of FIS technical commissions focusing an improvement of the evaluation process.

Effects of image processing on the detective quantum efficiency

NASA Astrophysics Data System (ADS)

Park, Hye-Suk; Kim, Hee-Joung; Cho, Hyo-Min; Lee, Chang-Lae; Lee, Seung-Wan; Choi, Yu-Na

2010-04-01

Digital radiography has gained popularity in many areas of clinical practice. This transition brings interest in advancing the methodologies for image quality characterization. However, as the methodologies for such characterizations have not been standardized, the results of these studies cannot be directly compared. The primary objective of this study was to standardize methodologies for image quality characterization. The secondary objective was to evaluate affected factors to Modulation transfer function (MTF), noise power spectrum (NPS), and detective quantum efficiency (DQE) according to image processing algorithm. Image performance parameters such as MTF, NPS, and DQE were evaluated using the international electro-technical commission (IEC 62220-1)-defined RQA5 radiographic techniques. Computed radiography (CR) images of hand posterior-anterior (PA) for measuring signal to noise ratio (SNR), slit image for measuring MTF, white image for measuring NPS were obtained and various Multi-Scale Image Contrast Amplification (MUSICA) parameters were applied to each of acquired images. In results, all of modified images were considerably influence on evaluating SNR, MTF, NPS, and DQE. Modified images by the post-processing had higher DQE than the MUSICA=0 image. This suggests that MUSICA values, as a post-processing, have an affect on the image when it is evaluating for image quality. In conclusion, the control parameters of image processing could be accounted for evaluating characterization of image quality in same way. The results of this study could be guided as a baseline to evaluate imaging systems and their imaging characteristics by measuring MTF, NPS, and DQE.

Evaluating the Upset Protrusion Joining (UPJ) Method to Join magnesium Castings to Dissimilar Metals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Logan, Stephen D.

2015-08-19

This presentation discusses advantages and best practices for incorporating magnesium in automotive component applications to achieve substantial mass reduction, as well as some of the key challenges with respect to joining, coating, and galvanic corrosion, before providing an introduction and status update of the U.S. Department of Energy and Department of Defense jointly sponsored Upset Protrusion Joining (UPJ) process development and evaluation project. This update includes sharing performance results of a benchmark evaluation of the self-pierce riveting (SPR) process for joining dissimilar magnesium (Mg) to aluminum (Al) materials in four unique coating configurations before introducing the UPJ concept and comparingmore » performance results of the joints made with the UPJ process to those made with the SPR process.« less

A Methodology for Evaluating Artifacts Produced by a Formal Verification Process

NASA Technical Reports Server (NTRS)

Siminiceanu, Radu I.; Miner, Paul S.; Person, Suzette

2011-01-01

The goal of this study is to produce a methodology for evaluating the claims and arguments employed in, and the evidence produced by formal verification activities. To illustrate the process, we conduct a full assessment of a representative case study for the Enabling Technology Development and Demonstration (ETDD) program. We assess the model checking and satisfiabilty solving techniques as applied to a suite of abstract models of fault tolerant algorithms which were selected to be deployed in Orion, namely the TTEthernet startup services specified and verified in the Symbolic Analysis Laboratory (SAL) by TTTech. To this end, we introduce the Modeling and Verification Evaluation Score (MVES), a metric that is intended to estimate the amount of trust that can be placed on the evidence that is obtained. The results of the evaluation process and the MVES can then be used by non-experts and evaluators in assessing the credibility of the verification results.

Operations research methods improve chemotherapy patient appointment scheduling.

PubMed

Santibáñez, Pablo; Aristizabal, Ruben; Puterman, Martin L; Chow, Vincent S; Huang, Wenhai; Kollmannsberger, Christian; Nordin, Travis; Runzer, Nancy; Tyldesley, Scott

2012-12-01

Clinical complexity, scheduling restrictions, and outdated manual booking processes resulted in frequent clerical rework, long waitlists for treatment, and late appointment notification for patients at a chemotherapy clinic in a large cancer center in British Columbia, Canada. A 17-month study was conducted to address booking, scheduling and workload issues and to develop, implement, and evaluate solutions. A review of scheduling practices included process observation and mapping, analysis of historical appointment data, creation of a new performance metric (final appointment notification lead time), and a baseline patient satisfaction survey. Process improvement involved discrete event simulation to evaluate alternative booking practice scenarios, development of an optimization-based scheduling tool to improve scheduling efficiency, and change management for implementation of process changes. Results were evaluated through analysis of appointment data, a follow-up patient survey, and staff surveys. Process review revealed a two-stage scheduling process. Long waitlists and late notification resulted from an inflexible first-stage process. The second-stage process was time consuming and tedious. After a revised, more flexible first-stage process and an automated second-stage process were implemented, the median percentage of appointments exceeding the final appointment notification lead time target of one week was reduced by 57% and median waitlist size decreased by 83%. Patient surveys confirmed increased satisfaction while staff feedback reported reduced stress levels. Significant operational improvements can be achieved through process redesign combined with operations research methods.

Meta-evaluation of a participatory process in the strengthening of municipal management

PubMed Central

de Almeida, Cristiane Andrea Locatelli; Tanaka, Oswaldo Yoshimi

2017-01-01

ABSTRACT OBJECTIVE To evaluate, with a focus on participation, an evaluation process developed by municipal managers and administrators of a health region in the state of São Paulo, considering the need for theoretical reflection on participatory health practices in the Brazilian context. METHODS Qualitative research that used the framework developed by Daigneault and Jacob (2009) to analyze the empirical material, encompassing three dimensions of participation: control of the evaluation process, diversity of participants, and extent of their involvement. We highlighted decisions or contextual aspects that deepened or limited the participatory option in the process under study. RESULTS We identified the presence and important performance of stakeholders who are “not specialists in evaluation”, through participation both in the direction of the evaluation process and in its distinct stages. The formed group started from their own annoyances added to the need for information and reflection to define the subject and scope of the evaluation; the use of the process planned by them guided the definition of the data to be collected and the format of result dissemination; the empirical material analysis was undertaken jointly by the participants. Regarding the third dimension, a limitation was identified regarding the diversity of actors involved due to the prioritization of the possibility of in-depth work with a fixed group of managers. CONCLUSIONS It is stated that there is no “ideal participation model” for evaluations. In certain contexts and structures, real opportunities for participation – even if they seem fragile at first sight – should be leveraged, and that requires flexibility and critical reflection on the part of those responsible for the evaluation processes to undertake the necessary adjustments. PMID:29166448

PORTABLE LISP; a list-processing interpreter. [CDC7600; PASCAL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, W.P.

The program constitutes a complete, basic LISP (LIST-Processing language) interpreter. LISP expressions are evaluated one by one with both the input expression and the resulting evaluated expression printed. Expressions are evaluated until a FIN card is encountered. Between expression evaluations a garbage-collection algorithm is invoked to recover list space used in the previous evaluation.CDC7600; PASCAL; SCOPE; The sample problem was executed in 7000 (octal) words of memory on a CDC7600.

Mouse-tracking evidence for parallel anticipatory option evaluation.

PubMed

Cranford, Edward A; Moss, Jarrod

2017-12-23

In fast-paced, dynamic tasks, the ability to anticipate the future outcome of a sequence of events is crucial to quickly selecting an appropriate course of action among multiple alternative options. There are two classes of theories that describe how anticipation occurs. Serial theories assume options are generated and evaluated one at a time, in order of quality, whereas parallel theories assume simultaneous generation and evaluation. The present research examined the option evaluation process during a task designed to be analogous to prior anticipation tasks, but within the domain of narrative text comprehension. Prior research has relied on indirect, off-line measurement of the option evaluation process during anticipation tasks. Because the movement of the hand can provide a window into underlying cognitive processes, online metrics such as continuous mouse tracking provide more fine-grained measurements of cognitive processing as it occurs in real time. In this study, participants listened to three-sentence stories and predicted the protagonists' final action by moving a mouse toward one of three possible options. Each story was presented with either one (control condition) or two (distractor condition) plausible ending options. Results seem most consistent with a parallel option evaluation process because initial mouse trajectories deviated further from the best option in the distractor condition compared to the control condition. It is difficult to completely rule out all possible serial processing accounts, although the results do place constraints on the time frame in which a serial processing explanation must operate.

Motivational Forces in a Growth-Centered Model of Teacher Evaluation

ERIC Educational Resources Information Center

Bruski, Nicholas Aron

2012-01-01

This paper presents the results of a study that explored the effects of using an action research process to examine and develop a system of teacher evaluation that leads to real changes in teacher behaviors. The study explored motivational forces and psychological processes related to the change process in adult behaviors. Data were collected by…

An Evaluation System for the Online Training Programs in Meteorology and Hydrology

ERIC Educational Resources Information Center

Wang, Yong; Zhi, Xiefei

2009-01-01

This paper studies the current evaluation system for the online training program in meteorology and hydrology. CIPP model that includes context evaluation, input evaluation, process evaluation and product evaluation differs from Kirkpatrick model including reactions evaluation, learning evaluation, transfer evaluation and results evaluation in…

Cognitive processing of visual images in migraine populations in between headache attacks.

PubMed

Mickleborough, Marla J S; Chapman, Christine M; Toma, Andreea S; Handy, Todd C

2014-09-25

People with migraine headache have altered interictal visual sensory-level processing in between headache attacks. Here we examined the extent to which these migraine abnormalities may extend into higher visual processing such as implicit evaluative analysis of visual images in between migraine events. Specifically, we asked two groups of participants--migraineurs (N=29) and non-migraine controls (N=29)--to view a set of unfamiliar commercial logos in the context of a target identification task as the brain electrical responses to these objects were recorded via event-related potentials (ERPs). Following this task, participants individually identified those logos that they most liked or disliked. We applied a between-groups comparison of how ERP responses to logos varied as a function of hedonic evaluation. Our results suggest migraineurs have abnormal implicit evaluative processing of visual stimuli. Specifically, migraineurs lacked a bias for disliked logos found in control subjects, as measured via a late positive potential (LPP) ERP component. These results suggest post-sensory consequences of migraine in between headache events, specifically abnormal cognitive evaluative processing with a lack of normal categorical hedonic evaluation. Copyright © 2014 Elsevier B.V. All rights reserved.

Monetary and affective judgments of consumer goods: modes of evaluation matter.

PubMed

Seta, John J; Seta, Catherine E; McCormick, Michael; Gallagher, Ashleigh H

2014-01-01

Participants who evaluated 2 positively valued items separately reported more positive attraction (using affective and monetary measures) than those who evaluated the same two items as a unit. In Experiments 1-3, this separate/unitary evaluation effect was obtained when participants evaluated products that they were purchasing for a friend. Similar findings were obtained in Experiments 4 and 5 when we considered the amount participants were willing to spend to purchase insurance for items that they currently owned. The averaging/summation model was contrasted with several theoretical perspectives and implicated averaging and summation integration processes in how items are evaluated. The procedural and theoretical similarities and differences between this work and related research on unpacking, comparison processes, public goods, and price bundling are discussed. Overall, the results support the operation of integration processes and contribute to an understanding of how these processes influence the evaluation and valuation of private goods.

Evaluation of participatory planning: Lessons from Hungarian Natura 2000 management planning processes.

PubMed

Kovács, Eszter; Kelemen, Eszter; Kiss, Gabriella; Kalóczkai, Ágnes; Fabók, Veronika; Mihók, Barbara; Megyesi, Boldizsár; Pataki, György; Bodorkós, Barbara; Balázs, Bálint; Bela, Györgyi; Margóczi, Katalin; Roboz, Ágnes; Molnár, Dániel

2017-12-15

Stakeholder participation in nature conservation policies and especially in the management of protected areas has gained importance in the last decades. These changes are underlined by democratic principles and the perceived contribution of stakeholder involvement to the effectiveness of conservation management. Evaluating participatory processes is essential to learn about the past and thus increase the quality of future processes. The evaluation can be useful for the organisations responsible for planning and management, stakeholders and policy makers as well. The present paper shows the results of a systematic evaluation of 25 participatory processes related to the development of management plans for Natura 2000 sites in Hungary between 2007 and 2015. A conceptual framework was developed to evaluate the process and outcome of participatory management planning processes. Criteria were based on the scientific literature on public participation and tailored to conservation-related management planning and stakeholder involvement. Evaluated processes were grouped in three cases based on their time range and financial sources. Overall, the analysed processes scored at a medium level, showing better performance in the process criteria than in the outcome criteria. The best case scored significantly higher in four criteria compared to the other cases: representativeness, resource availability for facilitation, new, creative ideas and impact on the plan. The main factors behind the success were (1) embeddedness of the planning process in a larger project, where the plan was a tool for conservation, (2) carrying out only one process at a time, (3) previous experience of facilitators and planners with participatory planning and (4) the opportunity and capacity to propose a payment scheme as an incentive. But even this case received low scores in some criteria: conflict resolution, early involvement and well defined goals. Based on the results we suggest that more data is needed to evaluate the implementation of the plans and, in many cases, the impact of the process on the plan. Performance can be improved with the assistance of policy makers by further developing guidelines, harmonising payment schemes with the conservation measures of the plans and providing training on conflict resolution. The evaluation framework proved to be suitable for the assessment of a large set of conservation related management planning processes, but it also had some limitations, e.g. concerning the incorporation of stakeholders' views in the evaluation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Aesthetic Diagnosis in Gestalt Therapy †

PubMed Central

Roubal, Jan; Francesetti, Gianni; Gecele, Michela

2017-01-01

The diagnostic process in psychotherapy using the aesthetic evaluation is described in this article. Unlike the classical diagnostic process, which presents a result of comparing clinicians´ observations with a diagnostic system (DSM, ICD, etc.), the aesthetic evaluation is a pre-reflexive, embodied, and preverbal process. A Gestalt Therapy theoretical frame is used to introduce a concept of the aesthetic diagnostic process. During this process, the clinicians use their own here-and-now presence, which takes part in the co-creation of the shared relational field during the therapeutic session. A specific procedure of the aesthetic evaluation is introduced. The clinical work with depressed clients is presented to illustrate this perspective. PMID:29039752

EVALUATION OF BIOMASS REACTIVITY IN HYDROGASIFICATION FOR THE HYNOL PROCESS

EPA Science Inventory

The report gives results of an evaluation of the reactivity of poplar wood in hydrogasification under the operating conditions specific for the Hynol process, using a thermobalance reactor. Parameters affecting gasification behavior (e.g., gas velocity, particle size, system pres...

Evaluation of the Capillary Blood Glucose Self-monitoring Program

PubMed Central

Augusto, Mariana Cristina; Nitsche, Maria José Trevizani; Parada, Cristina Maria Garcia de Lima; Zanetti, Maria Lúcia; Carvalhaes, Maria Antonieta de Barros Leite

2014-01-01

OBJECTIVE: to evaluate the structure, process and results of the Capillary Blood Glucose Self-monitoring Program in a Brazilian city. METHOD: epidemiological, cross-sectional study. The methodological framework of Donabedian was used to construct indicators of structure, process and outcome. A random sample (n = 288) of users enrolled and 96 health professionals who worked in the program was studied. Two questionnaires were used that were constructed for this study, one for professionals and one for users, both containing data for the evaluation of structure, process and outcome. Anthropometric measures and laboratory results were collected by consulting the patients' health records. The analysis involved descriptive statistics. RESULTS: most of the professionals were not qualified to work in the program and were not knowledgeable about the set of criteria for patient registration. None of the patients received complete and correct orientations about the program and the percentage with skills to perform conducts autonomously was 10%. As regards the result indicators, 86.4% of the patients and 81.3% of the professionals evaluated the program positively. CONCLUSION: the evaluation indicators designed revealed that one of the main objectives of the program, self-care skills, has not been achieved. PMID:25493676

Development and Processing Improvement of Aerospace Aluminum Alloys

NASA Technical Reports Server (NTRS)

Lisagor, W. Barry; Bales, Thomas T.

2007-01-01

This final report, in multiple presentation format, describes a comprehensive multi-tasked contract study to improve the overall property response of selected aerospace alloys, explore further a newly-developed and registered alloy, and correlate the processing, metallurgical structure, and subsequent properties achieved with particular emphasis on the crystallographic orientation texture developed. Modifications to plate processing, specifically hot rolling practices, were evaluated for Al-Li alloys 2195 and 2297, for the recently registered Al-Cu-Ag alloy, 2139, and for the Al-Zn-Mg-Cu alloy, 7050. For all of the alloys evaluated, the processing modifications resulted in significant improvements in mechanical properties. Analyses also resulted in an enhanced understanding of the correlation of processing, crystallographic texture, and mechanical properties.

Evaluating Indicators and Life Cycle Inventories for Processes in Early Stages of Technical Readiness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, Eric C; Smith, Raymond; Ruiz-Mercado, Gerardo

This presentation examines different methods for analyzing manufacturing processes in the early stages of technical readiness. Before developers know much detail about their processes, it is valuable to apply various assessments to evaluate their performance. One type of assessment evaluates performance indicators to describe how closely processes approach desirable objectives. Another type of assessment determines the life cycle inventories (LCI) of inputs and outputs for processes, where for a functional unit of product, the user evaluates the resources used and the releases to the environment. These results can be compared to similar processes or combined with the LCI of othermore » processes to examine up-and down-stream chemicals. The inventory also provides a listing of the up-stream chemicals, which permits study of the whole life cycle. Performance indicators are evaluated in this presentation with the U.S. Environmental Protection Agency's GREENSCOPE (Gauging Reaction Effectiveness for ENvironmental Sustainability with a multi-Objective Process Evaluator) methodology, which evaluates processes in four areas: Environment, Energy, Economics, and Efficiency. The method develops relative scores for indicators that allow comparisons across various technologies. In this contribution, two conversion pathways for producing cellulosic ethanol from biomass, via thermochemical and biochemical routes, are studied. The information developed from the indicators and LCI can be used to inform the process design and the potential life cycle effects of up- and down-stream chemicals.« less

Nitrogen Trifluoride-Based Fluoride- Volatility Separations Process: Initial Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

McNamara, Bruce K.; Scheele, Randall D.; Casella, Andrew M.

2011-09-28

This document describes the results of our investigations on the potential use of nitrogen trifluoride as the fluorinating and oxidizing agent in fluoride volatility-based used nuclear fuel reprocessing. The conceptual process uses differences in reaction temperatures between nitrogen trifluoride and fuel constituents that produce volatile fluorides to achieve separations and recover valuable constituents. We provide results from our thermodynamic evaluations, thermo-analytical experiments, kinetic models, and provide a preliminary process flowsheet. The evaluations found that nitrogen trifluoride can effectively produce volatile fluorides at different temperatures dependent on the fuel constituent.

Fear of negative evaluation modulates electrocortical and behavioral responses when anticipating social evaluative feedback

PubMed Central

Van der Molen, Melle J. W.; Poppelaars, Eefje S.; Van Hartingsveldt, Caroline T. A.; Harrewijn, Anita; Gunther Moor, Bregtje; Westenberg, P. Michiel

2014-01-01

Cognitive models posit that the fear of negative evaluation (FNE) is a hallmark feature of social anxiety. As such, individuals with high FNE may show biased information processing when faced with social evaluation. The aim of the current study was to examine the neural underpinnings of anticipating and processing social-evaluative feedback, and its correlates with FNE. We used a social judgment paradigm in which female participants (N = 31) were asked to indicate whether they believed to be socially accepted or rejected by their peers. Anticipatory attention was indexed by the stimulus preceding negativity (SPN), while the feedback-related negativity and P3 were used to index the processing of social-evaluative feedback. Results provided evidence of an optimism bias in social peer evaluation, as participants more often predicted to be socially accepted than rejected. Participants with high levels of FNE needed more time to provide their judgments about the social-evaluative outcome. While anticipating social-evaluative feedback, SPN amplitudes were larger for anticipated social acceptance than for social rejection feedback. Interestingly, the SPN during anticipated social acceptance was larger in participants with high levels of FNE. None of the feedback-related brain potentials correlated with the FNE. Together, the results provided evidence of biased information processing in individuals with high levels of FNE when anticipating (rather than processing) social-evaluative feedback. The delayed response times in high FNE individuals were interpreted to reflect augmented vigilance imposed by the upcoming social-evaluative threat. Possibly, the SPN constitutes a neural marker of this vigilance in females with higher FNE levels, particularly when anticipating social acceptance feedback. PMID:24478667

Media milling process optimization for manufacture of drug nanoparticles using design of experiments (DOE).

PubMed

Nekkanti, Vijaykumar; Marwah, Ashwani; Pillai, Raviraj

2015-01-01

Design of experiments (DOE), a component of Quality by Design (QbD), is systematic and simultaneous evaluation of process variables to develop a product with predetermined quality attributes. This article presents a case study to understand the effects of process variables in a bead milling process used for manufacture of drug nanoparticles. Experiments were designed and results were computed according to a 3-factor, 3-level face-centered central composite design (CCD). The factors investigated were motor speed, pump speed and bead volume. Responses analyzed for evaluating these effects and interactions were milling time, particle size and process yield. Process validation batches were executed using the optimum process conditions obtained from software Design-Expert® to evaluate both the repeatability and reproducibility of bead milling technique. Milling time was optimized to <5 h to obtain the desired particle size (d90 < 400 nm). The desirability function used to optimize the response variables and observed responses were in agreement with experimental values. These results demonstrated the reliability of selected model for manufacture of drug nanoparticles with predictable quality attributes. The optimization of bead milling process variables by applying DOE resulted in considerable decrease in milling time to achieve the desired particle size. The study indicates the applicability of DOE approach to optimize critical process parameters in the manufacture of drug nanoparticles.

The participatory design of a performance oriented monitoring and evaluation system in an international development environment.

PubMed

Guerra-López, Ingrid; Hicks, Karen

2015-02-01

This article illustrates the application of the impact monitoring and evaluation process for the design and development of a performance monitoring and evaluation framework in the context of human and institutional capacity development. This participative process facilitated stakeholder ownership in several areas including the design, development, and use of a new monitoring and evaluation system, as well their targeted results and accomplishments through the use of timely performance data gathered through ongoing monitoring and evaluation. The process produced a performance indicator map, a comprehensive monitoring and evaluation framework, and data collection templates to promote the development, implementation, and sustainability of the monitoring and evaluation system of a farmer's trade union in an African country. Copyright © 2014 Elsevier Ltd. All rights reserved.

Disability Policy Evaluation: Combining Logic Models and Systems Thinking.

PubMed

Claes, Claudia; Ferket, Neelke; Vandevelde, Stijn; Verlet, Dries; De Maeyer, Jessica

2017-07-01

Policy evaluation focuses on the assessment of policy-related personal, family, and societal changes or benefits that follow as a result of the interventions, services, and supports provided to those persons to whom the policy is directed. This article describes a systematic approach to policy evaluation based on an evaluation framework and an evaluation process that combine the use of logic models and systems thinking. The article also includes an example of how the framework and process have recently been used in policy development and evaluation in Flanders (Belgium), as well as four policy evaluation guidelines based on relevant published literature.

Assessing coastal reclamation suitability based on a fuzzy-AHP comprehensive evaluation framework: A case study of Lianyungang, China.

PubMed

Feng, Lan; Zhu, Xiaodong; Sun, Xiang

2014-12-15

Coastal reclamation suitability evaluation (CRSE) is a difficult, complex and protracted process requiring the evaluation of many different criteria. In this paper, an integrated framework employing a fuzzy comprehensive evaluation method and analytic hierarchy process (AHP) was applied to the suitability evaluation for coastal reclamation for future sustainable development in the coastal area of Lianyungang, China. The evaluation results classified 6.63%, 22.99%, 31.59% and 38.79% of the coastline as suitable, weakly suitable, unsuitable and forbidden, respectively. The evaluation results were verified by the marine pollution data and highly consistent with the water quality status. The fuzzy-AHP comprehensive evaluation method (FACEM) was found to be suitable for the CRSE. This CRSE can also be applied to other coastal areas in China and thereby be used for the better management of coastal reclamation and coastline protection projects. Copyright © 2014 Elsevier Ltd. All rights reserved.

Evaluating the Risks: A Bernoulli Process Model of HIV Infection and Risk Reduction.

ERIC Educational Resources Information Center

Pinkerton, Steven D.; Abramson, Paul R.

1993-01-01

A Bernoulli process model of human immunodeficiency virus (HIV) is used to evaluate infection risks associated with various sexual behaviors (condom use, abstinence, or monogamy). Results suggest that infection is best mitigated through measures that decrease infectivity, such as condom use. (SLD)

Developing weighted criteria to evaluate lean reverse logistics through analytical network process

NASA Astrophysics Data System (ADS)

Zagloel, Teuku Yuri M.; Hakim, Inaki Maulida; Krisnawardhani, Rike Adyartie

2017-11-01

Reverse logistics is a part of supply chain that bring materials from consumers back to manufacturer in order to gain added value or do a proper disposal. Nowadays, most companies are still facing several problems on reverse logistics implementation which leads to high waste along reverse logistics processes. In order to overcome this problem, Madsen [Framework for Reverse Lean Logistics to Enable Green Manufacturing, Eco Design 2009: 6th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Sapporo, 2009] has developed a lean reverse logistics framework as a step to eliminate waste by implementing lean on reverse logistics. However, the resulted framework sets aside criteria used to evaluate its performance. This research aims to determine weighted criteria that can be used as a base on reverse logistics evaluation by considering lean principles. The resulted criteria will ensure reverse logistics are kept off from waste, thus implemented efficiently. Analytical Network Process (ANP) is used in this research to determine the weighted criteria. The result shows that criteria used for evaluation lean reverse logistics are Innovation and Learning (35%), Economic (30%), Process Flow Management (14%), Customer Relationship Management (13%), Environment (6%), and Social (2%).

Social identity modifies face perception: an ERP study of social categorization

PubMed Central

Stedehouder, Jeffrey; Ito, Tiffany A.

2015-01-01

Two studies examined whether social identity processes, i.e. group identification and social identity threat, amplify the degree to which people attend to social category information in early perception [assessed with event-related brain potentials (ERPs)]. Participants were presented with faces of Muslims and non-Muslims in an evaluative priming task while ERPs were measured and implicit evaluative bias was assessed. Study 1 revealed that non-Muslims showed stronger differentiation between ingroup and outgroup faces in both early (N200) and later processing stages (implicit evaluations) when they identified more strongly with their ethnic group. Moreover, identification effects on implicit bias were mediated by intergroup differentiation in the N200. In Study 2, social identity threat (vs control) was manipulated among Muslims. Results revealed that high social identity threat resulted in stronger differentiation of Muslims from non-Muslims in early (N200) and late (implicit evaluations) processing stages, with N200 effects again predicting implicit bias. Combined, these studies reveal how seemingly bottom-up early social categorization processes are affected by individual and contextual variables that affect the meaning of social identity. Implications of these results for the social identity perspective as well as social cognitive theories of person perception are discussed. PMID:25140049

Towards an evaluation framework for Laboratory Information Systems.

PubMed

Yusof, Maryati M; Arifin, Azila

Laboratory testing and reporting are error-prone and redundant due to repeated, unnecessary requests and delayed or missed reactions to laboratory reports. Occurring errors may negatively affect the patient treatment process and clinical decision making. Evaluation on laboratory testing and Laboratory Information System (LIS) may explain the root cause to improve the testing process and enhance LIS in supporting the process. This paper discusses a new evaluation framework for LIS that encompasses the laboratory testing cycle and the socio-technical part of LIS. Literature review on discourses, dimensions and evaluation methods of laboratory testing and LIS. A critical appraisal of the Total Testing Process (TTP) and the human, organization, technology-fit factors (HOT-fit) evaluation frameworks was undertaken in order to identify error incident, its contributing factors and preventive action pertinent to laboratory testing process and LIS. A new evaluation framework for LIS using a comprehensive and socio-technical approach is outlined. Positive relationship between laboratory and clinical staff resulted in a smooth laboratory testing process, reduced errors and increased process efficiency whilst effective use of LIS streamlined the testing processes. The TTP-LIS framework could serve as an assessment as well as a problem-solving tool for the laboratory testing process and system. Copyright © 2016 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

Image processing system performance prediction and product quality evaluation

NASA Technical Reports Server (NTRS)

Stein, E. K.; Hammill, H. B. (Principal Investigator)

1976-01-01

The author has identified the following significant results. A new technique for image processing system performance prediction and product quality evaluation was developed. It was entirely objective, quantitative, and general, and should prove useful in system design and quality control. The technique and its application to determination of quality control procedures for the Earth Resources Technology Satellite NASA Data Processing Facility are described.

Agricultural Handling and Processing Industries; Data Pertinent to an Evaluation of Overtime Exemptions Available under the Fair Labor Standards Act. Volume I.

ERIC Educational Resources Information Center

Wage and Labor Standards Administration (DOL), Washington, DC.

This report covers the major agricultural handling and processing industries qualifying for partial overtime exemption under the Fair Labor Standards Act and evaluates the need for such exemptions. Questionnaires which were sent to firms in various processing industries provide data on nearly 4,000 processors. The results show that existing…

Graphical Technique to Support the Teaching/Learning Process of Software Process Reference Models

NASA Astrophysics Data System (ADS)

Espinosa-Curiel, Ismael Edrein; Rodríguez-Jacobo, Josefina; Fernández-Zepeda, José Alberto

In this paper, we propose a set of diagrams to visualize software process reference models (PRM). The diagrams, called dimods, are the combination of some visual and process modeling techniques such as rich pictures, mind maps, IDEF and RAD diagrams. We show the use of this technique by designing a set of dimods for the Mexican Software Industry Process Model (MoProSoft). Additionally, we perform an evaluation of the usefulness of dimods. The result of the evaluation shows that dimods may be a support tool that facilitates the understanding, memorization, and learning of software PRMs in both, software development organizations and universities. The results also show that dimods may have advantages over the traditional description methods for these types of models.

A multidimensional evaluation of a nursing information-literacy program.

PubMed Central

Fox, L M; Richter, J M; White, N E

1996-01-01

The goal of an information-literacy program is to develop student skills in locating, evaluating, and applying information for use in critical thinking and problem solving. This paper describes a multidimensional evaluation process for determining nursing students' growth in cognitive and affective domains. Results indicate improvement in student skills as a result of a nursing information-literacy program. Multidimensional evaluation produces a well-rounded picture of student progress based on formal measurement as well as informal feedback. Developing new educational programs can be a time-consuming challenge. It is important, when expending so much effort, to ensure that the goals of the new program are achieved and benefits to students demonstrated. A multidimensional approach to evaluation can help to accomplish those ends. In 1988, The University of Northern Colorado School of Nursing began working with a librarian to integrate an information-literacy component, entitled Pathways to Information Literacy, into the curriculum. This article describes the program and discusses how a multidimensional evaluation process was used to assess program effectiveness. The evaluation process not only helped to measure the effectiveness of the program but also allowed the instructors to use several different approaches to evaluation. PMID:8826621

Evaluation of the Effects of AFFF Inputs on the VIP Biological Nutrient Removal Process and Pass-Through Toxicity. Phase 1A. Volume I.

DTIC Science & Technology

1997-10-01

This report discusses the results of a bench scale study conducted to evaluate the potential inhibitory effects of untreated AFFF wastewater to the...untreated AFFF wastewater to the nitrification process of the Virginia Initiative Plant biological nutrient removal system. Under this testing, bench...scale reactors simulating the nitrification process were loaded at various AFFF concentrations and the influence on the process performance was

Transportation systems evaluation methodology development and applications, phase 3

NASA Technical Reports Server (NTRS)

Kuhlthau, A. R.; Jacobson, I. D.; Richards, L. C.

1981-01-01

Transportation systems or proposed changes in current systems are evaluated. Four principal evaluation criteria are incorporated in the process, operating performance characteristics as viewed by potential users, decisions based on the perceived impacts of the system, estimating what is required to reduce the system to practice; and predicting the ability of the concept to attract financial support. A series of matrix multiplications in which the various matrices represent evaluations in a logical sequence of the various discrete steps in a management decision process is used. One or more alternatives are compared with the current situation, and the result provides a numerical rating which determines the desirability of each alternative relative to the norm and to each other. The steps in the decision process are isolated so that contributions of each to the final result are readily analyzed. The ability to protect against bias on the part of the evaluators, and the fact that system parameters which are basically qualitative in nature can be easily included are advantageous.

EVALUATION OF POLLUTION PREVENTION TECHNIQUES TO REDUCE STYRENE EMISIONS FROM OPEN CONTACT MOLDING PROCESSES - VOLUME 1. FINAL REPORT

EPA Science Inventory

The report gives results of a study to evaluate several pollution prevention techniques that could be used to reduce styrene emissions from open molding processes in the fiberglass-reinforced
plastics/composites (FRP/C) and fiberglass boat building industries. Styrene emission...

EVALUATION OF POLLUTION PREVENTION TECHNIQUES TO REDUCE STYRENE EMISSIONS FROM OPEN CONTACT MOLDING PROCESSES - VOLUME 2. APPENDICES

EPA Science Inventory

The report gives results of a study to evaluate several pollution prevention techniques that could be used to reduce styrene emissions from open molding processes in the fiberglass-reinforced plastics/composites (FRP/C) and fiberglass boat building industries. Styrene emissions u...

EVALUATION OF A PROCESS TO CONVERT BIOMASS TO METHANOL FUEL

EPA Science Inventory

The report gives results of a review of the design of a reactor capable of gasifying approximately 50 lb/hr of biomass for a pilot-scale facility to develop, demonstrate, and evaluate the Hynol Process, a high-temperature, high-pressure method for converting biomass into methanol...

EVALUATION OF A PROCESS TO CONVERT BIOMASS TO METHANOL FUEL - PROJECT SUMMARY

EPA Science Inventory

The report gives results of a review of the design of a reactor capable of gasifying approximately 50 lb/hr of biomass for a pilot-scale facility to develop, demonstrate, and evaluate the Hynol Process, a high-temperature, high-pressure method for converting biomass into methanol...

EVALUATION OF A TEST METHOD FOR MEASURING INDOOR AIR EMISSIONS FROM DRY-PROCESS PHOTOCOPIERS

EPA Science Inventory

A large chamber test method for measuring indoor air emissions from office equipment was developed, evaluated, and revised based on the initial testing of four dry-process photocopiers. Because all chambers may not necessarily produce similar results (e.g., due to differences in ...

Energy deposition evaluation for ultra-low energy electron beam irradiation systems using calibrated thin radiochromic film and Monte Carlo simulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matsui, S., E-mail: smatsui@gpi.ac.jp; Mori, Y.; Nonaka, T.

2016-05-15

For evaluation of on-site dosimetry and process design in industrial use of ultra-low energy electron beam (ULEB) processes, we evaluate the energy deposition using a thin radiochromic film and a Monte Carlo simulation. The response of film dosimeter was calibrated using a high energy electron beam with an acceleration voltage of 2 MV and alanine dosimeters with uncertainty of 11% at coverage factor 2. Using this response function, the results of absorbed dose measurements for ULEB were evaluated from 10 kGy to 100 kGy as a relative dose. The deviation between the responses of deposit energy on the films andmore » Monte Carlo simulations was within 15%. As far as this limitation, relative dose estimation using thin film dosimeters with response function obtained by high energy electron irradiation and simulation results is effective for ULEB irradiation processes management.« less

Energy deposition evaluation for ultra-low energy electron beam irradiation systems using calibrated thin radiochromic film and Monte Carlo simulations.

PubMed

Matsui, S; Mori, Y; Nonaka, T; Hattori, T; Kasamatsu, Y; Haraguchi, D; Watanabe, Y; Uchiyama, K; Ishikawa, M

2016-05-01

For evaluation of on-site dosimetry and process design in industrial use of ultra-low energy electron beam (ULEB) processes, we evaluate the energy deposition using a thin radiochromic film and a Monte Carlo simulation. The response of film dosimeter was calibrated using a high energy electron beam with an acceleration voltage of 2 MV and alanine dosimeters with uncertainty of 11% at coverage factor 2. Using this response function, the results of absorbed dose measurements for ULEB were evaluated from 10 kGy to 100 kGy as a relative dose. The deviation between the responses of deposit energy on the films and Monte Carlo simulations was within 15%. As far as this limitation, relative dose estimation using thin film dosimeters with response function obtained by high energy electron irradiation and simulation results is effective for ULEB irradiation processes management.

An Application of X-Ray Fluorescence as Process Analytical Technology (PAT) to Monitor Particle Coating Processes.

PubMed

Nakano, Yoshio; Katakuse, Yoshimitsu; Azechi, Yasutaka

2018-06-01

An attempt to apply X-Ray Fluorescence (XRF) analysis to evaluate small particle coating process as a Process Analytical Technologies (PAT) was made. The XRF analysis was used to monitor coating level in small particle coating process with at-line manner. The small particle coating process usually consists of multiple coating processes. This study was conducted by a simple coating particles prepared by first coating of a model compound (DL-methionine) and second coating by talc on spherical microcrystalline cellulose cores. The particles with two layered coating are enough to demonstrate the small particle coating process. From the result by the small particle coating process, it was found that the XRF signal played different roles, resulting that XRF signals by first coating (layering) and second coating (mask coating) could demonstrate the extent with different mechanisms for the coating process. Furthermore, the particle coating of the different particle size has also been investigated to evaluate size effect of these coating processes. From these results, it was concluded that the XRF could be used as a PAT in monitoring particle coating processes and become powerful tool in pharmaceutical manufacturing.

Evaluation of components of residential treatment by Medicaid ICF-MR surveys: a validity assessment.

PubMed Central

Reid, D H; Parsons, M B; Green, C W; Schepis, M M

1991-01-01

We evaluated the proficiency of the federal Medicaid program's survey process for evaluating intermediate care facilities for the mentally retarded. In Study 1, an observational analysis of active treatment during leisure times in living units suggested that these surveys did not discriminate between certified and noncertified units. In Study 2, a reactivity analysis of a survey indicated that direct-care staff performed differently during the survey by increasing interactions with clients and decreasing nonwork behavior. Similarly, results of Study 3 showed increases in client access to leisure materials during a survey. In Study 4, questionnaire results indicated considerable variability among service providers' opinions on the consistency, accuracy, and objectivity with which survey teams determine agency standard compliance. Results are discussed regarding effects of the questionable proficiency of survey processes and the potential utility of behavioral assessment methodologies to improve such processes. PMID:1909696

[Principles for the evaluation of telemedicine applications: Results of a systematic review and consensus process].

PubMed

Arnold, Katrin; Scheibe, Madlen; Müller, Olaf; Schmitt, Jochen

2016-11-01

The limited number of telemedicine applications being transferred to standard medical care in Germany may to some extent be explained by deficits in the current evaluation practice. Effectiveness and cost effectiveness can only be demonstrated to decision makers and potential users with methodologically sound and fully published evaluations. There is a lack of well-founded and mandatory standards for adequate, comparable evaluations of telemedicine applications. As part of the project CCS Telehealth Eastern Saxony (CCS THOS), a systematic review on evaluation concepts for telemedicine applications (search period until September 2014, databases Medline, Embase, HTA-Database, DARE, NHS EED) as well as an additional selective literature search were conducted. Suggestions for evaluation fundamentals were derived from the results. These suggestions were subjected to a formal consensus process (nominal group process) with relevant stakeholder groups (healthcare payers, healthcare providers, health policy representatives, researchers). 19 papers were included in the systematic review. In accordance with the predefined inclusion criteria, each presented an evaluation concept for telemedicine applications that was based upon a systematic review and/or a consensus process. Via a formal consensus process, the suggestions for evaluation principles derived from the review and the selective literature search (23 papers) resulted in ten agreed evaluation principles. Eight of them were unanimously agreed upon, two were arrived at with one abstention each. The principles enclose criteria for the planning, conduct and reporting of telemedicine evaluations. Adherence to them is obligatory for users of the telemedical infrastructure provided by CCS THOS. Furthermore, right from the beginning the intention was very much for these principles to be seized upon by other projects and initiatives. The agreed evaluation principles for telemedicine applications are the first in Germany to be based both upon evidence and consensus. Due to the methodology of development, they have a strong scientific and health policy legitimation. Therefore, and because of their general applicability, adherence to these principles beyond the context of the telemedicine platform developed within CCS THOS is recommended, namely throughout the German telemedicine scene. Copyright © 2016. Published by Elsevier GmbH.

Evaluation of Contact Heat Transfer Coefficient and Phase Transformation during Hot Stamping of a Hat-Type Part

PubMed Central

Kim, Heung-Kyu; Lee, Seong Hyeon; Choi, Hyunjoo

2015-01-01

Using an inverse analysis technique, the heat transfer coefficient on the die-workpiece contact surface of a hot stamping process was evaluated as a power law function of contact pressure. This evaluation was to determine whether the heat transfer coefficient on the contact surface could be used for finite element analysis of the entire hot stamping process. By comparing results of the finite element analysis and experimental measurements of the phase transformation, an evaluation was performed to determine whether the obtained heat transfer coefficient function could provide reasonable finite element prediction for workpiece properties affected by the hot stamping process. PMID:28788046

Online Deviation Detection for Medical Processes

PubMed Central

Christov, Stefan C.; Avrunin, George S.; Clarke, Lori A.

2014-01-01

Human errors are a major concern in many medical processes. To help address this problem, we are investigating an approach for automatically detecting when performers of a medical process deviate from the acceptable ways of performing that process as specified by a detailed process model. Such deviations could represent errors and, thus, detecting and reporting deviations as they occur could help catch errors before harm is done. In this paper, we identify important issues related to the feasibility of the proposed approach and empirically evaluate the approach for two medical procedures, chemotherapy and blood transfusion. For the evaluation, we use the process models to generate sample process executions that we then seed with synthetic errors. The process models describe the coordination of activities of different process performers in normal, as well as in exceptional situations. The evaluation results suggest that the proposed approach could be applied in clinical settings to help catch errors before harm is done. PMID:25954343

Application of the Intervention Mapping Framework to Develop an Integrated Twenty-first Century Core Curriculum—Part Three: Curriculum Implementation and Evaluation

PubMed Central

Corvin, Jaime A.; DeBate, Rita; Wolfe-Quintero, Kate; Petersen, Donna J.

2017-01-01

Public health professionals have been challenged to radically reform public health training to meet evolving demands of twenty-first century public health. Such a transformation requires a systems thinking approach with an interdisciplinary focus on problem solving, leadership, management and teamwork, technology and information, budgeting and finance, and communication. This article presents processes for implementing and evaluating a revised public health curriculum and outlines lessons learned from this initiative. To date, more than 200 students have participated in the initial pilot testing of this program. A rigorous process and outcome evaluation plan was developed and employed. Results from the evaluation were used to enhance the resulting curriculum. Specifically, all instructional materials were evaluated by both the students who received the materials and the faculty who presented the materials. As each successive pilot is delivered, both enrollment and faculty involvement has increased. Through this process, the value of committed faculty, the importance of engaging learners in the evaluation of an education program, and the need to implement curriculum that has been carefully evaluated and evidence-informed in nature has emerged. We credit our successful transformation of the Masters in Public Health core to the challenge provided by the Framing the Future task force, the commitment of our College of Public Health leadership, the engagement of our faculty, and the time we allowed for the process to unfold. Ultimately, we believe this transformed curriculum will result in better trained public health professionals, interdisciplinary practitioners who can see public health challenges in new and different ways. PMID:29164093

Application of the Intervention Mapping Framework to Develop an Integrated Twenty-first Century Core Curriculum-Part Three: Curriculum Implementation and Evaluation.

PubMed

Corvin, Jaime A; DeBate, Rita; Wolfe-Quintero, Kate; Petersen, Donna J

2017-01-01

Public health professionals have been challenged to radically reform public health training to meet evolving demands of twenty-first century public health. Such a transformation requires a systems thinking approach with an interdisciplinary focus on problem solving, leadership, management and teamwork, technology and information, budgeting and finance, and communication. This article presents processes for implementing and evaluating a revised public health curriculum and outlines lessons learned from this initiative. To date, more than 200 students have participated in the initial pilot testing of this program. A rigorous process and outcome evaluation plan was developed and employed. Results from the evaluation were used to enhance the resulting curriculum. Specifically, all instructional materials were evaluated by both the students who received the materials and the faculty who presented the materials. As each successive pilot is delivered, both enrollment and faculty involvement has increased. Through this process, the value of committed faculty, the importance of engaging learners in the evaluation of an education program, and the need to implement curriculum that has been carefully evaluated and evidence-informed in nature has emerged. We credit our successful transformation of the Masters in Public Health core to the challenge provided by the Framing the Future task force, the commitment of our College of Public Health leadership, the engagement of our faculty, and the time we allowed for the process to unfold. Ultimately, we believe this transformed curriculum will result in better trained public health professionals, interdisciplinary practitioners who can see public health challenges in new and different ways.

NEXT GENERATION ANALYSIS SOFTWARE FOR COMPONENT EVALUATION - Results of Rotational Seismometer Evaluation

NASA Astrophysics Data System (ADS)

Hart, D. M.; Merchant, B. J.; Abbott, R. E.

2012-12-01

The Component Evaluation project at Sandia National Laboratories supports the Ground-based Nuclear Explosion Monitoring program by performing testing and evaluation of the components that are used in seismic and infrasound monitoring systems. In order to perform this work, Component Evaluation maintains a testing facility called the FACT (Facility for Acceptance, Calibration, and Testing) site, a variety of test bed equipment, and a suite of software tools for analyzing test data. Recently, Component Evaluation has successfully integrated several improvements to its software analysis tools and test bed equipment that have substantially improved our ability to test and evaluate components. The software tool that is used to analyze test data is called TALENT: Test and AnaLysis EvaluatioN Tool. TALENT is designed to be a single, standard interface to all test configuration, metadata, parameters, waveforms, and results that are generated in the course of testing monitoring systems. It provides traceability by capturing everything about a test in a relational database that is required to reproduce the results of that test. TALENT provides a simple, yet powerful, user interface to quickly acquire, process, and analyze waveform test data. The software tool has also been expanded recently to handle sensors whose output is proportional to rotation angle, or rotation rate. As an example of this new processing capability, we show results from testing the new ATA ARS-16 rotational seismometer. The test data was collected at the USGS ASL. Four datasets were processed: 1) 1 Hz with increasing amplitude, 2) 4 Hz with increasing amplitude, 3) 16 Hz with increasing amplitude and 4) twenty-six discrete frequencies between 0.353 Hz to 64 Hz. The results are compared to manufacture-supplied data sheets.

Standard model light-by-light scattering in SANC: Analytic and numeric evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bardin, D. Yu., E-mail: bardin@nu.jinr.ru; Kalinovskaya, L. V., E-mail: kalinov@nu.jinr.ru; Uglov, E. D., E-mail: corner@nu.jinr.r

2010-11-15

The implementation of the Standard Model process {gamma}{gamma} {yields} {gamma}{gamma} through a fermion and boson loop into the framework of SANC system and additional precomputation modules used for calculation of massive box diagrams are described. The computation of this process takes into account nonzero mass of loop particles. The covariant and helicity amplitudes for this process, some particular cases of D{sub 0} and C{sub 0} Passarino-Veltman functions, and also numerical results of corresponding SANC module evaluation are presented. Whenever possible, the results are compared with those existing in the literature.

Practicing universal design to actual hand tool design process.

PubMed

Lin, Kai-Chieh; Wu, Chih-Fu

2015-09-01

UD evaluation principles are difficult to implement in product design. This study proposes a methodology for implementing UD in the design process through user participation. The original UD principles and user experience are used to develop the evaluation items. Difference of product types was considered. Factor analysis and Quantification theory type I were used to eliminate considered inappropriate evaluation items and to examine the relationship between evaluation items and product design factors. Product design specifications were established for verification. The results showed that converting user evaluation into crucial design verification factors by the generalized evaluation scale based on product attributes as well as the design factors applications in product design can improve users' UD evaluation. The design process of this study is expected to contribute to user-centered UD application. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Lessons learned from evaluating launch-site processing problems of Space Shuttle payloads

NASA Technical Reports Server (NTRS)

Flores, Carlos A.; Heuser, Robert E.; Sales, Johnny R.; Smith, Anthony M.

1992-01-01

The authors discuss a trend analysis program that is being conducted on the problem reports written during the processing of Space Shuttle payloads at Kennedy Space Center. The program is aimed at developing lessons learned that can both improve the effectiveness of the current payload processing cycles as well as help to guide the processing strategies for Space Station Freedom. The payload processing reports from STS 26R and STS 41 are used. A two-tier evaluation activity is described, and some typical results from the tier one analyses are presented.

Electronic Resources Evaluation Central: Using Off-the-Shelf Software, Web 2.0 Tools, and LibGuides to Manage an Electronic Resources Evaluation Process

ERIC Educational Resources Information Center

England, Lenore; Fu, Li

2011-01-01

A critical part of electronic resources management, the electronic resources evaluation process is multi-faceted and includes a seemingly endless range of resources and tools involving numerous library staff. A solution is to build a Web site to bring all of the components together that can be implemented quickly and result in an organizational…

Modifying Evaluations and Decisions in Risky Situations.

PubMed

Maldonado, Antonio; Serra, Sara; Catena, Andrés; Cándido, Antonio; Megías, Alberto

2016-09-20

The main aim of this research was to investigate the decision making process in risky situations. We studied how different types of feedback on risky driving behaviors modulate risk evaluation and risk-taking. For a set of risky traffic situations, participants had to make evaluative judgments (judge the situation as risky or not) and urgent decisions (brake or not). In Experiment 1, participants received feedback with and without negative emotional content when they made risky behaviors. In Experiment 2 we investigated the independent effects of feedback and negative emotional stimuli. The results showed three important findings: First, urgent decisions were faster [F(1, 92) = 6.76, p = .01] and more cautious [F(1, 92) = 17.16, p < .001] than evaluative judgments. These results suggest that evaluative judgments of risk and actual risk-taking may not always coincide, and that they seem to be controlled by two different processing systems as proposed by dual process theories. Second, feedback made participants' responses even faster [F(1, 111) = 71.53, p < .001], allowing greater risk sensitivity [F(1, 111) = 22.12, p < .001] and skewing towards more cautious responses [F(1, 111) = 14.09, p < .001]. Finally, emotional stimuli had an effect only when they were presented as feedback. The results of this research increase our understanding of the processes involved in risky driving behavior and suggest efficient ways to control risk taking through the use of feedback.

Assessing and Analyzing the Effects of WBLP on Learning Processes and Achievements: Using the Electronic Portfolio for Authentic Assessment on University Students' Learning.

ERIC Educational Resources Information Center

Chang, Chi-Cheng

A Web-Based Learning Portfolio (WBLP) was evaluated through practical teaching process to understand if the WBLP system helps students to grasp the learning process and enhances learning outcomes. The evaluation results reveal that this WBLP system has been more useful for students to obtain the feedback from other students than from their…

Measuring societal effects of transdisciplinary research projects: design and application of an evaluation method.

PubMed

Walter, Alexander I; Helgenberger, Sebastian; Wiek, Arnim; Scholz, Roland W

2007-11-01

Most Transdisciplinary Research (TdR) projects combine scientific research with the building of decision making capacity for the involved stakeholders. These projects usually deal with complex, societally relevant, real-world problems. This paper focuses on TdR projects, which integrate the knowledge of researchers and stakeholders in a collaborative transdisciplinary process through structured methods of mutual learning. Previous research on the evaluation of TdR has insufficiently explored the intended effects of transdisciplinary processes on the real world (societal effects). We developed an evaluation framework for assessing the societal effects of transdisciplinary processes. Outputs (measured as procedural and product-related involvement of the stakeholders), impacts (intermediate effects connecting outputs and outcomes) and outcomes (enhanced decision making capacity) are distinguished as three types of societal effects. Our model links outputs and outcomes of transdisciplinary processes via the impacts using a mediating variables approach. We applied this model in an ex post evaluation of a transdisciplinary process. 84 out of 188 agents participated in a survey. The results show significant mediation effects of the two impacts "network building" and "transformation knowledge". These results indicate an influence of a transdisciplinary process on the decision making capacity of stakeholders, especially through social network building and the generation of knowledge relevant for action.

Space Station Water Processor Process Pump

NASA Technical Reports Server (NTRS)

Parker, David

1995-01-01

This report presents the results of the development program conducted under contract NAS8-38250-12 related to the International Space Station (ISS) Water Processor (WP) Process Pump. The results of the Process Pumps evaluation conducted on this program indicates that further development is required in order to achieve the performance and life requirements for the ISSWP.

Evaluating public participation in environmental decision-making: EPA's superfund community involvement program.

PubMed

Charnley, Susan; Engelbert, Bruce

2005-11-01

This article discusses an 8-year, ongoing project that evaluates the Environmental Protection Agency's Superfund community involvement program. The project originated as a response to the Government Performance and Results Act, which requires federal agencies to articulate program goals, and evaluate and report their progress in meeting those goals. The evaluation project assesses how effective the Superfund community involvement program is in promoting public participation in decisions about how to clean up hazardous wastes at Superfund sites. We do three things in the article: (1) share our experience with evaluating an Agency public participation program, including lessons learned about methods of evaluation; (2) report evaluation results; and (3) address a number of issues pertaining to the evaluation of public participation in environmental decision-making. Our goal is to encourage more environmental managers to incorporate evaluation into their public participation programs as a tool for improving them. We found that written mail surveys were an effective and economical tool for obtaining feedback on EPA's community involvement program at Superfund sites. The evaluation focused on four criteria: citizen satisfaction with EPA information about the Superfund site, citizen understanding of environmental and human health risks associated with the site, citizen satisfaction with opportunities provided by EPA for community input, and citizen satisfaction with EPA's response to community input. While the evaluation results were mixed, in general, community members who were most informed about and involved in the cleanup process at Superfund sites generally were also the most satisfied with the community involvement process, and the job that EPA was doing cleaning up the site. We conclude that systematic evaluation provides meaningful and useful information that agencies can use to improve their public participation programs. However, there need to be institutionalized processes that ensure evaluation results are used to develop and implement strategies for improvement.

PROCESS IMPROVEMENT STUDIES ON THE BATTELLE HYDROTHERMAL COAL PROCESS

EPA Science Inventory

The report gives results of a study to improve the economic viability of the Battelle Hydrothermal (HT) Coal Process by reducing the costs associated with liquid/solid separation and leachant regeneration. Laboratory experiments were conducted to evaluate process improvements for...

ARSENIC REMOVAL FROM DRINKING WATER BY PROCESS MODIFICATION TO COAGULATION/FILTRATION. USEPA DEMONSTRATION PROJECT AT LIDGERWOOD, ND. FINAL PERFORMANCE EVALUATION REPORT

EPA Science Inventory

This report documents the activities performed and the results obtained for the arsenic removal treatment technology demonstration project at the Lidgerwood, North Dakota site. The objectives of the project were to evaluate: (1) the effectiveness of process modifications to an e...

Peer-Led, School-Based Nutrition Education for Young Adolescents: Feasibility and Process Evaluation of the TEENS Study.

ERIC Educational Resources Information Center

Story, Mary; Lytle, Leslie A.; Birnbaum, Amanda S.; Perry, Cheryl L.

2002-01-01

Describes the feasibility of the peer leader component of a school-based nutrition intervention for young adolescents designed to increase fruit and vegetable consumption and lower fat consumption. Results from a multicomponent process evaluation involving participant feedback, observation, and teacher ratings and interviews indicated that…

Process evaluation results from the HEALTHY nutrition intervention to modify the total school food environment

USDA-ARS?s Scientific Manuscript database

The process evaluation of HEALTHY, a large multi-center trial to decrease type 2 diabetes mellitus in middle school children, monitored the implementation of the intervention to ascertain the extent that components were delivered and received as intended. The purpose of this article is to report the...

Structuring an Internal Evaluation Process.

ERIC Educational Resources Information Center

Gordon, Sheila C.; Heinemann, Harry N.

1980-01-01

The design of an internal program evaluation system requires (1) formulation of program, operational, and institutional objectives; (2) establishment of evaluation criteria; (3) choice of data collection and evaluation techniques; (4) analysis of results; and (5) integration of the system into the mainstream of operations. (SK)

Functional evaluations in the monitoring of the river ecosystem processes: the Adige River as a case stu.

PubMed

Braioni, M G; Salmoiraghi, G; Bracco, F; Villani, M; Braioni, A; Girelli, L

2002-03-12

A model of analysis and environmental evaluation was applied to 11 stretches of the Adige River, where an innovative procedure was carried out to interpret ecological results. Within each stretch, the most suitable methods were used to assess the quality and processes of flood plains, banks, water column, bed, and interstitial environment. Indices were applied to evaluate the wild state and ecological quality of the banks (wild state index, buffer strip index) and the landscape quality of wide areas of the fluvial corridor (environmental landscape index). The biotic components (i.e., macrozoobenthos, phytoplankton and zooplankton, interstitial hyporheic fauna, vegetation in the riparian areas) were analysed by both quantitative and functional methods (as productivity, litter--processing and colonisation). The results achieved were then translated into five classes of functional evaluation. These qualitative assessments have thus preserved a high level of precision and sensitivity in quantifying both the quality of the environmental conditions and the integrity of the ecosystem processes. Read together with urban planning data, they indicate what actions are needed to restore and rehabilitate the Adige River corridor.

Evaluation of the quality of the teaching-learning process in undergraduate courses in Nursing 1

PubMed Central

González-Chordá, Víctor Manuel; Maciá-Soler, María Loreto

2015-01-01

Abstract Objective: to identify aspects of improvement of the quality of the teaching-learning process through the analysis of tools that evaluated the acquisition of skills by undergraduate students of Nursing. Method: prospective longitudinal study conducted in a population of 60 secondyear Nursing students based on registration data, from which quality indicators that evaluate the acquisition of skills were obtained, with descriptive and inferential analysis. Results: nine items were identified and nine learning activities included in the assessment tools that did not reach the established quality indicators (p<0.05). There are statistically significant differences depending on the hospital and clinical practices unit (p<0.05). Conclusion: the analysis of the evaluation tools used in the article "Nursing Care in Welfare Processes" of the analyzed university undergraduate course enabled the detection of the areas for improvement in the teachinglearning process. The challenge of education in nursing is to reach the best clinical research and educational results, in order to provide improvements to the quality of education and health care. PMID:26444173

Factors affecting the corrosivity of pulping liquors

NASA Astrophysics Data System (ADS)

Hazlewood, Patrick Evan

Increased equipment failures and the resultant increase in unplanned downtime as the result of process optimization programs continue to plague pulp mills. The failures are a result of a lack of understanding of corrosion in the different pulping liquors, specifically the parameters responsible for its adjustment such as the role and identification of inorganic and organic species. The current work investigates the role of inorganic species, namely sodium hydroxide and sodium sulfide, on liquor corrosivity at a range of process conditions beyond those currently experienced in literature. The role of sulfur species, in the activation of corrosion and the ability of hydroxide to passivate carbon steel A516-Gr70, is evaluated with gravimetric and electrochemical methods. The impact of wood chip weathering on process corrosion was also evaluated. Results were used to identify black liquor components, depending on the wood species, which play a significant role in the activation and inhibition of corrosion for carbon steel A516-Gr70 process equipment. Further, the effect of black liquor oxidation on liquor corrosivity was evaluated. Corrosion and stress corrosion cracking performance of selected materials provided information on classes of materials that may be reliably used in aggressive pulping environments.

Evaluating Acoustic Emission Signals as an in situ process monitoring technique for Selective Laser Melting (SLM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisher, Karl A.; Candy, Jim V.; Guss, Gabe

2016-10-14

In situ real-time monitoring of the Selective Laser Melting (SLM) process has significant implications for the AM community. The ability to adjust the SLM process parameters during a build (in real-time) can save time, money and eliminate expensive material waste. Having a feedback loop in the process would allow the system to potentially ‘fix’ problem regions before a next powder layer is added. In this study we have investigated acoustic emission (AE) phenomena generated during the SLM process, and evaluated the results in terms of a single process parameter, of an in situ process monitoring technique.

Progress in centralised ethics review processes: Implications for multi-site health evaluations.

PubMed

Prosser, Brenton; Davey, Rachel; Gibson, Diane

2015-04-01

Increasingly, public sector programmes respond to complex social problems that intersect specific fields and individual disciplines. Such responses result in multi-site initiatives that can span nations, jurisdictions, sectors and organisations. The rigorous evaluation of public sector programmes is now a baseline expectation. For evaluations of large and complex multi-site programme initiatives, the processes of ethics review can present a significant challenge. However in recent years, there have been new developments in centralised ethics review processes in many nations. This paper provides the case study of an evaluation of a national, inter-jurisdictional, cross-sector, aged care health initiative and its encounters with Australian centralised ethics review processes. Specifically, the paper considers progress against the key themes of a previous five-year, five nation study (Fitzgerald and Phillips, 2006), which found that centralised ethics review processes would save time, money and effort, as well as contribute to more equitable workloads for researchers and evaluators. The paper concludes with insights for those charged with refining centralised ethics review processes, as well as recommendations for future evaluators of complex multi-site programme initiatives. Copyright © 2015 Elsevier Ltd. All rights reserved.

Error Analysis Of Students Working About Word Problem Of Linear Program With NEA Procedure

NASA Astrophysics Data System (ADS)

Santoso, D. A.; Farid, A.; Ulum, B.

2017-06-01

Evaluation and assessment is an important part of learning. In evaluation process of learning, written test is still commonly used. However, the tests usually do not following-up by further evaluation. The process only up to grading stage not to evaluate the process and errors which done by students. Whereas if the student has a pattern error and process error, actions taken can be more focused on the fault and why is that happen. NEA procedure provides a way for educators to evaluate student progress more comprehensively. In this study, students’ mistakes in working on some word problem about linear programming have been analyzed. As a result, mistakes are often made students exist in the modeling phase (transformation) and process skills (process skill) with the overall percentage distribution respectively 20% and 15%. According to the observations, these errors occur most commonly due to lack of precision of students in modeling and in hastiness calculation. Error analysis with students on this matter, it is expected educators can determine or use the right way to solve it in the next lesson.

Organic food processing: a framework for concept, starting definitions and evaluation.

PubMed

Kahl, Johannes; Alborzi, Farnaz; Beck, Alexander; Bügel, Susanne; Busscher, Nicolaas; Geier, Uwe; Matt, Darja; Meischner, Tabea; Paoletti, Flavio; Pehme, Sirli; Ploeger, Angelika; Rembiałkowska, Ewa; Schmid, Otto; Strassner, Carola; Taupier-Letage, Bruno; Załęcka, Aneta

2014-10-01

In 2007 EU Regulation (EC) 834/2007 introduced principles and criteria for organic food processing. These regulations have been analysed and discussed in several scientific publications and research project reports. Recently, organic food quality was described by principles, aspects and criteria. These principles from organic agriculture were verified and adapted for organic food processing. Different levels for evaluation were suggested. In another document, underlying paradigms and consumer perception of organic food were reviewed against functional food, resulting in identifying integral product identity as the underlying paradigm and a holistic quality view connected to naturalness as consumers' perception of organic food quality. In a European study, the quality concept was applied to the organic food chain, resulting in a problem, namely that clear principles and related criteria were missing to evaluate processing methods. Therefore the goal of this paper is to describe and discuss the topic of organic food processing to make it operational. A conceptual background for organic food processing is given by verifying the underlying paradigms and principles of organic farming and organic food as well as on organic processing. The proposed definition connects organic processing to related systems such as minimal, sustainable and careful, gentle processing, and describes clear principles and related criteria. Based on food examples, such as milk with different heat treatments, the concept and definitions were verified. Organic processing can be defined by clear paradigms and principles and evaluated according criteria from a multidimensional approach. Further work has to be done on developing indicators and parameters for assessment of organic food quality. © 2013 Society of Chemical Industry.

Social identity modifies face perception: an ERP study of social categorization.

PubMed

Derks, Belle; Stedehouder, Jeffrey; Ito, Tiffany A

2015-05-01

Two studies examined whether social identity processes, i.e. group identification and social identity threat, amplify the degree to which people attend to social category information in early perception [assessed with event-related brain potentials (ERPs)]. Participants were presented with faces of Muslims and non-Muslims in an evaluative priming task while ERPs were measured and implicit evaluative bias was assessed. Study 1 revealed that non-Muslims showed stronger differentiation between ingroup and outgroup faces in both early (N200) and later processing stages (implicit evaluations) when they identified more strongly with their ethnic group. Moreover, identification effects on implicit bias were mediated by intergroup differentiation in the N200. In Study 2, social identity threat (vs control) was manipulated among Muslims. Results revealed that high social identity threat resulted in stronger differentiation of Muslims from non-Muslims in early (N200) and late (implicit evaluations) processing stages, with N200 effects again predicting implicit bias. Combined, these studies reveal how seemingly bottom-up early social categorization processes are affected by individual and contextual variables that affect the meaning of social identity. Implications of these results for the social identity perspective as well as social cognitive theories of person perception are discussed. © The Author (2014). Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

Cryogenic Treatment of Al-Li Alloys for Improved Weldability, Repairability, and Reduction of Residual Stresses

NASA Technical Reports Server (NTRS)

Malone, Tina W.; Graham, Benny F.; Gentz, Steven J. (Technical Monitor)

2001-01-01

Service performance has shown that cryogenic treatment of some metals provides improved strength, fatigue life, and wear resistance to the processed material. Effects such as these were initially discovered by NASA engineers while evaluating spacecraft that had returned from the cold vacuum of space. Factors such as high cost, poor repairability, and poor machinability are currently prohibitive for wide range use of some aerospace aluminum alloys. Application of a cryogenic treatment process to these alloys is expected provide improvements in weldability and weld properties coupled with a reduction in repairs resulting in a significant reduction in the cost to manufacture and life cycle cost of aerospace hardware. The primary purpose of this effort was to evaluate the effects of deep cryogenic treatment of some aluminum alloy plate products, welds, and weld repairs, and optimize a process for the treatment of these materials. The optimized process is being evaluated for improvements in properties of plate and welds, improvements in weldability and repairability of treated materials, and as an alternative technique for the reduction of residual stresses in repaired welds. This paper will present the results of testing and evaluation conducted in this effort. These results will include assessments of changes in strength, toughness, stress corrosion susceptability, weldability, repairability, and reduction in residual stresses of repaired welds.

The evolution of an evaluation: a case study using the tribal participatory research model.

PubMed

Richmond, Lucinda S; Peterson, Donna J; Betts, Sherry C

2008-10-01

This article presents a case study of how the evaluation design for a dating violence prevention and/or youth development program for American Indian youth in Arizona evolved throughout the project. Particular attention is given to how the evaluation design was guided by the tribal participatory research model. A brief rationale for the project is presented along with literature on culturally competent evaluation and research with American Indians. A description of the project and the unique communities in which it was implemented is provided. The focus of the article is the process of how the evaluation plan changed and how various factors influenced this process (e.g., feedback from community stakeholders, conversations with funder, results of process evaluation, suggestions from literature, the authors' experience working in American Indian communities). The authors conclude with lessons learned for others to consider as they develop working relationships and evaluation plans in similar communities.

Development of a Program Logic Model and Evaluation Plan for a Participatory Ergonomics Intervention in Construction

PubMed Central

Jaegers, Lisa; Dale, Ann Marie; Weaver, Nancy; Buchholz, Bryan; Welch, Laura; Evanoff, Bradley

2013-01-01

Background Intervention studies in participatory ergonomics (PE) are often difficult to interpret due to limited descriptions of program planning and evaluation. Methods In an ongoing PE program with floor layers, we developed a logic model to describe our program plan, and process and summative evaluations designed to describe the efficacy of the program. Results The logic model was a useful tool for describing the program elements and subsequent modifications. The process evaluation measured how well the program was delivered as intended, and revealed the need for program modifications. The summative evaluation provided early measures of the efficacy of the program as delivered. Conclusions Inadequate information on program delivery may lead to erroneous conclusions about intervention efficacy due to Type III error. A logic model guided the delivery and evaluation of our intervention and provides useful information to aid interpretation of results. PMID:24006097

42 CFR 488.9 - Onsite observation of accreditation organization operations.

Code of Federal Regulations, 2014 CFR

2014-10-01

... the application review process, the validation review process, or the continuing oversight of an... limited to, the review of documents, auditing meetings concerning the accreditation process, the evaluation of survey results or the accreditation decision-making process, and interviews with the...

42 CFR 488.9 - Onsite observation of accreditation organization operations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... the application review process, the validation review process, or the continuing oversight of an... limited to, the review of documents, auditing meetings concerning the accreditation process, the evaluation of survey results or the accreditation decision-making process, and interviews with the...

42 CFR 488.9 - Onsite observation of accreditation organization operations.

Code of Federal Regulations, 2012 CFR

2012-10-01

... the application review process, the validation review process, or the continuing oversight of an... limited to, the review of documents, auditing meetings concerning the accreditation process, the evaluation of survey results or the accreditation decision-making process, and interviews with the...

42 CFR 488.9 - Onsite observation of accreditation organization operations.

Code of Federal Regulations, 2013 CFR

2013-10-01

... the application review process, the validation review process, or the continuing oversight of an... limited to, the review of documents, auditing meetings concerning the accreditation process, the evaluation of survey results or the accreditation decision-making process, and interviews with the...

Effectiveness evaluation of double-layered satellite network with laser and microwave hybrid links based on fuzzy analytic hierarchy process

NASA Astrophysics Data System (ADS)

Zhang, Wei; Rao, Qiaomeng

2018-01-01

In order to solve the problem of high speed, large capacity and limited spectrum resources of satellite communication network, a double-layered satellite network with global seamless coverage based on laser and microwave hybrid links is proposed in this paper. By analyzing the characteristics of the double-layered satellite network with laser and microwave hybrid links, an effectiveness evaluation index system for the network is established. And then, the fuzzy analytic hierarchy process, which combines the analytic hierarchy process and the fuzzy comprehensive evaluation theory, is used to evaluate the effectiveness of the double-layered satellite network with laser and microwave hybrid links. Furthermore, the evaluation result of the proposed hybrid link network is obtained by simulation. The effectiveness evaluation process of the proposed double-layered satellite network with laser and microwave hybrid links can help to optimize the design of hybrid link double-layered satellite network and improve the operating efficiency of the satellite system.

The effects of processing non-timber forest products and trade partnerships on people's well-being and forest conservation in Amazonian societies.

PubMed

Morsello, Carla; Ruiz-Mallén, Isabel; Diaz, Maria Dolores Montoya; Reyes-García, Victoria

2012-01-01

This study evaluated whether processing non-timber forest products (NTFPs) and establishing trade partnerships between forest communities and companies enhance the outcomes of NTFP commercialization. In particular, we evaluated whether product processing, partnerships, or their combination was associated with a number of outcomes related to the well-being of forest inhabitants and forest conservation. We based our analyses on ethnographic and quantitative data (i.e., survey and systematic observations) gathered at seven communities from five societies of the Brazilian and Bolivian Amazon. Our results indicated that product processing and partnerships do not represent a silver bullet able to improve the results of NTFP commercialization in terms of well-being and conservation indicators. Compared with cases without interventions, households adopting partnerships but not product processing were most often associated with improved economic proxies of well-being (total income, NTFP income, food consumption and gender equality in income). In comparison, the combination of product processing and partnerships was associated with similar outcomes. Unexpectedly, product processing alone was associated with negative outcomes in the economic indicators of well-being. All of the investigated strategies were associated with less time spent in social and cultural activities. With respect to forest conservation, the strategies that included a partnership with or without processing produced similar results: while household deforestation tended to decrease, the hunting impact increased. Processing alone was also associated with higher levels of hunting, though it did not reduce deforestation. Our results indicate that establishing partnerships may enhance the outcomes of NTFP trade in terms of the financial outcomes of local communities, but practitioners need to use caution when adopting the processing strategy and they need to evaluate potential negative results for indicators of social and cultural activities. With respect to conservation, the three strategies are promising for reducing deforestation, but more pervasive impacts, such as hunting, might increase.

The Effects of Processing Non-Timber Forest Products and Trade Partnerships on People's Well-Being and Forest Conservation in Amazonian Societies

PubMed Central

Morsello, Carla; Ruiz-Mallén, Isabel; Diaz, Maria Dolores Montoya; Reyes-García, Victoria

2012-01-01

This study evaluated whether processing non-timber forest products (NTFPs) and establishing trade partnerships between forest communities and companies enhance the outcomes of NTFP commercialization. In particular, we evaluated whether product processing, partnerships, or their combination was associated with a number of outcomes related to the well-being of forest inhabitants and forest conservation. We based our analyses on ethnographic and quantitative data (i.e., survey and systematic observations) gathered at seven communities from five societies of the Brazilian and Bolivian Amazon. Our results indicated that product processing and partnerships do not represent a silver bullet able to improve the results of NTFP commercialization in terms of well-being and conservation indicators. Compared with cases without interventions, households adopting partnerships but not product processing were most often associated with improved economic proxies of well-being (total income, NTFP income, food consumption and gender equality in income). In comparison, the combination of product processing and partnerships was associated with similar outcomes. Unexpectedly, product processing alone was associated with negative outcomes in the economic indicators of well-being. All of the investigated strategies were associated with less time spent in social and cultural activities. With respect to forest conservation, the strategies that included a partnership with or without processing produced similar results: while household deforestation tended to decrease, the hunting impact increased. Processing alone was also associated with higher levels of hunting, though it did not reduce deforestation. Our results indicate that establishing partnerships may enhance the outcomes of NTFP trade in terms of the financial outcomes of local communities, but practitioners need to use caution when adopting the processing strategy and they need to evaluate potential negative results for indicators of social and cultural activities. With respect to conservation, the three strategies are promising for reducing deforestation, but more pervasive impacts, such as hunting, might increase. PMID:22912787

Evaluation of solar angle variation over digital processing of LANDSAT imagery. [Brazil

NASA Technical Reports Server (NTRS)

Parada, N. D. J. (Principal Investigator); Novo, E. M. L. M.

1984-01-01

The effects of the seasonal variation of illumination over digital processing of LANDSAT images are evaluated. Original images are transformed by means of digital filtering to enhance their spatial features. The resulting images are used to obtain an unsupervised classification of relief units. After defining relief classes, which are supposed to be spectrally different, topographic variables (declivity, altitude, relief range and slope length) are used to identify the true relief units existing on the ground. The samples are also clustered by means of an unsupervised classification option. The results obtained for each LANDSAT overpass are compared. Digital processing is highly affected by illumination geometry. There is no correspondence between relief units as defined by spectral features and those resulting from topographic features.

Evaluation of the Magnesium Hydroxide Treatment Process for Stabilizing PFP Plutonium/Nitric Acid Solutions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerber, Mark A.; Schmidt, Andrew J.; Delegard, Calvin H.

2000-09-28

This document summarizes an evaluation of the magnesium hydroxide [Mg(OH)2] process to be used at the Hanford Plutonium Finishing Plant (PFP) for stabilizing plutonium/nitric acid solutions to meet the goal of stabilizing the plutonium in an oxide form suitable for storage under DOE-STD-3013-99. During the treatment process, nitric acid solutions bearing plutonium nitrate are neutralized with Mg(OH)2 in an air sparge reactor. The resulting slurry, containing plutonium hydroxide, is filtered and calcined. The process evaluation included a literature review and extensive laboratory- and bench-scale testing. The testing was conducted using cerium as a surrogate for plutonium to identify and quantifymore » the effects of key processing variables on processing time (primarily neutralization and filtration time) and calcined product properties.« less

Propositional Versus Dual-Process Accounts of Evaluative Conditioning: I. The Effects of Co-Occurrence and Relational Information on Implicit and Explicit Evaluations.

PubMed

Hu, Xiaoqing; Gawronski, Bertram; Balas, Robert

2017-01-01

Evaluative conditioning (EC) is defined as the change in the evaluation of a conditioned stimulus (CS) due to its pairing with a valenced unconditioned stimulus (US). According to propositional accounts, EC effects should be qualified by the relation between the CS and the US. Dual-process accounts suggest that relational information should qualify EC effects on explicit evaluations, whereas implicit evaluations should reflect the frequency of CS-US co-occurrences. Experiments 1 and 2 showed that, when relational information was provided before the encoding of CS-US pairings, it moderated EC effects on explicit, but not implicit, evaluations. In Experiment 3, relational information moderated EC effects on both explicit and implicit evaluations when it was provided simultaneously with CS-US pairings. Frequency of CS-US pairings had no effect on implicit evaluations. Although the results can be reconciled with both propositional and dual-process accounts, they are more parsimoniously explained by propositional accounts.

On the Automaticity of the Evaluative Priming Effect in the Valent/Non-Valent Categorization Task

PubMed Central

Spruyt, Adriaan; Tibboel, Helen

2015-01-01

It has previously been argued (a) that automatic evaluative stimulus processing is critically dependent upon feature-specific attention allocation and (b) that evaluative priming effects can arise in the absence of dimensional overlap between the prime set and the response set. In line with both claims, research conducted at our lab revealed that the evaluative priming effect replicates in the valent/non-valent categorization task. This research was criticized, however, because non-automatic, strategic processes may have contributed to the emergence of this effect. We now report the results of a replication study in which the operation of non-automatic, strategic processes was controlled for. A clear-cut evaluative priming effect emerged, thus supporting initial claims concerning feature-specific attention allocation and dimensional overlap. PMID:25803444

On the automaticity of the evaluative priming effect in the valent/non-valent categorization task.

PubMed

Spruyt, Adriaan; Tibboel, Helen

2015-01-01

It has previously been argued (a) that automatic evaluative stimulus processing is critically dependent upon feature-specific attention allocation and (b) that evaluative priming effects can arise in the absence of dimensional overlap between the prime set and the response set. In line with both claims, research conducted at our lab revealed that the evaluative priming effect replicates in the valent/non-valent categorization task. This research was criticized, however, because non-automatic, strategic processes may have contributed to the emergence of this effect. We now report the results of a replication study in which the operation of non-automatic, strategic processes was controlled for. A clear-cut evaluative priming effect emerged, thus supporting initial claims concerning feature-specific attention allocation and dimensional overlap.

Quantitative Evaluation of Heavy Duty Machine Tools Remanufacturing Based on Modified Catastrophe Progression Method

NASA Astrophysics Data System (ADS)

shunhe, Li; jianhua, Rao; lin, Gui; weimin, Zhang; degang, Liu

2017-11-01

The result of remanufacturing evaluation is the basis for judging whether the heavy duty machine tool can remanufacture in the EOL stage of the machine tool lifecycle management.The objectivity and accuracy of evaluation is the key to the evaluation method.In this paper, the catastrophe progression method is introduced into the quantitative evaluation of heavy duty machine tools’ remanufacturing,and the results are modified by the comprehensive adjustment method,which makes the evaluation results accord with the standard of human conventional thinking.Using the catastrophe progression method to establish the heavy duty machine tools’ quantitative evaluation model,to evaluate the retired TK6916 type CNC floor milling-boring machine’s remanufacturing.The evaluation process is simple,high quantification,the result is objective.

Developing and Evaluating the GriefLink Web Site: Processes, Protocols, Dilemmas and Lessons Learned

ERIC Educational Resources Information Center

Clark, Sheila; Burgess, Teresa; Laven, Gillian; Bull, Michael; Marker, Julie; Browne, Eric

2004-01-01

Despite a profusion of recommendations regarding the quality of web sites and guidelines related to ethical issues surrounding health-related sites, there is little guidance for the design and evaluation of sites relating to loss and grief. This article, which addresses these deficiencies, results from a community consultation process of designing…

A Process Evaluation of the Alaska Native Colorectal Cancer Family Outreach Program

ERIC Educational Resources Information Center

Redwood, Diana; Provost, Ellen; Lopez, Ellen D. S.; Skewes, Monica; Johnson, Rhonda; Christensen, Claudia; Sacco, Frank; Haverkamp, Donald

2016-01-01

This article presents the results of a process evaluation of the Alaska Native (AN) Colorectal Cancer (CRC) Family Outreach Program, which encourages CRC screening among AN first-degree relatives (i.e., parents, siblings, adult children; hereafter referred to as relatives) of CRC patients. Among AN people incidence and death rates from CRC are the…

Comparison of lignin extraction processes: Economic and environmental assessment.

PubMed

Carvajal, Juan C; Gómez, Álvaro; Cardona, Carlos A

2016-08-01

This paper presents the technical-economic and environmental assessment of four lignin extraction processes from two different raw materials (sugarcane bagasse and rice husks). The processes are divided into two categories, the first processes evaluates lignin extraction with prior acid hydrolysis step, while in the second case the extraction processes are evaluated standalone for a total analysis of 16 scenarios. Profitability indicators as the net present value (NPV) and environmental indicators as the potential environmental impact (PEI) are used through a process engineering approach to understand and select the best lignin extraction process. The results show that both economically and environmentally process with sulfites and soda from rice husk presents the best results; however the quality of lignin obtained with sulfites is not suitable for high value-added products. Then, the soda is an interesting option for the extraction of lignin if high quality lignin is required for high value-added products at low costs. Copyright © 2016 Elsevier Ltd. All rights reserved.

Analysis and Evaluation of the LANDSAT-4 MSS and TM Sensors and Ground Data Processing Systems: Early Results

NASA Technical Reports Server (NTRS)

Bernstein, R.; Lotspiech, J. B.

1985-01-01

The MSS and TM sensor performances were evaluated by studying both the sensors and the characteristics of the data. Information content analysis, image statistics, band-to-band registration, the presence of failed or failing detectors, and sensor resolution are discussed. The TM data were explored from the point of view of adequacy of the ground processing and improvements that could be made to compensate for sensor problems and deficiencies. Radiometric correction processing, compensation for a failed detector, and geometric correction processing are also considered.

Efficiency of Osmotic Dehydration of Apples in Polyols Solutions.

PubMed

Cichowska, Joanna; Żubernik, Joanna; Czyżewski, Jakub; Kowalska, Hanna; Witrowa-Rajchert, Dorota

2018-02-17

The present study aimed to evaluate the influence of selected compounds from the polyol group, as well as other saccharides, on the osmotic dehydration process of apples. The following alternative solutions were examined: erythritol, xylitol, maltitol, inulin and oligofructose. Efficiency of the osmotic dehydration process was evaluated based on the kinetics of the process, and through comparison of the results obtained during the application of a sucrose solution. This innovative research utilizes alternative solutions in osmotic pretreatment, which until now, have not been commonly used in fruit processing by researchers worldwide. Results indicate that erythritol and xylitol show stronger or similar efficiency to sucrose; however, the use of inulin, as well as oligofructose, was not satisfactory due to the insufficient, small osmotic driving forces of the process, and the low values of mass transfer parameters.

Effect of the Machining Processes on Low Cycle Fatigue Behavior of a Powder Metallurgy Disk

NASA Technical Reports Server (NTRS)

Telesman, J.; Kantzos, P.; Gabb, T. P.; Ghosn, L. J.

2010-01-01

A study has been performed to investigate the effect of various machining processes on fatigue life of configured low cycle fatigue specimens machined out of a NASA developed LSHR P/M nickel based disk alloy. Two types of configured specimen geometries were employed in the study. To evaluate a broach machining processes a double notch geometry was used with both notches machined using broach tooling. EDM machined notched specimens of the same configuration were tested for comparison purposes. Honing finishing process was evaluated by using a center hole specimen geometry. Comparison testing was again done using EDM machined specimens of the same geometry. The effect of these machining processes on the resulting surface roughness, residual stress distribution and microstructural damage were characterized and used in attempt to explain the low cycle fatigue results.

Student evaluation team focus groups increase students' satisfaction with the overall course evaluation process.

PubMed

Brandl, Katharina; Mandel, Jess; Winegarden, Babbi

2017-02-01

Most medical schools use online systems to gather student feedback on the quality of their educational programmes and services. Online data may be limiting, however, as the course directors cannot question the students about written comments, nor can students engage in mutual problem-solving dialogue with course directors. We describe the implementation of a student evaluation team (SET) process to permit course directors and students to gather shortly after courses end to engage in feedback and problem solving regarding the course and course elements. Approximately 16 students were randomly selected to participate in each SET meeting, along with the course director, academic deans and other faculty members involved in the design and delivery of the course. An objective expert facilitates the SET meetings. SETs are scheduled for each of the core courses and threads that occur within the first 2 years of medical school, resulting in approximately 29 SETs annually. SET-specific satisfaction surveys submitted by students (n = 76) and course directors (n = 16) in 2015 were used to evaluate the SET process itself. Survey data were collected from 885 students (2010-2015), which measured student satisfaction with the overall evaluation process before and after the implementation of SETs. Students and course directors valued the SET process itself as a positive experience. Students felt that SETs allowed their voices to be heard, and that the SET increased the probability of suggested changes being implemented. Students' satisfaction with the overall evaluation process significantly improved after implementation of the SET process. Our data suggest that the SET process is a valuable way to supplement online evaluation systems and to increase students' and faculty members' satisfaction with the evaluation process. © 2016 John Wiley & Sons Ltd and The Association for the Study of Medical Education.

Students' views on the block evaluation process: A descriptive analysis.

PubMed

Pakkies, Ntefeleng E; Mtshali, Ntombifikile G

2016-03-30

Higher education institutions have executed policies and practices intended to determine and promote good teaching. Students' evaluation of the teaching and learning process is seen as one measure of evaluating quality and effectiveness of instruction and courses. Policies and procedures guiding this process are discernible in universities, but it isoften not the case for nursing colleges. To analyse and describe the views of nursing students on block evaluation, and how feedback obtained from this process was managed. A quantitative descriptive study was conducted amongst nursing students (n = 177) in their second to fourth year of training from one nursing college in KwaZulu-Natal. A questionnaire was administered by the researcher and data were analysed using the Statistical Package of Social Sciences Version 19.0. The response rate was 145 (81.9%). The participants perceived the aim of block evaluation as improving the quality of teaching and enhancing their experiences as students.They questioned the significance of their input as stakeholders given that they had never been consulted about the development or review of the evaluation tool, or the administration process; and they often did not receive feedback from the evaluation they participated in. The college management should develop a clear organisational structure with supporting policies and operational guidelines for administering the evaluation process. The administration, implementation procedures, reporting of results and follow-up mechanisms should be made transparent and communicated to all concerned. Reports and actions related to these evaluations should provide feedback into relevant courses or programmes.

Development of a Nationally Coordinated Evaluation Plan for the Ghana National Strategy for Key Populations

PubMed Central

Reynolds, Heidi W; Atuahene, Kyeremeh; Sutherland, Elizabeth; Amenyah, Richard; Kwao, Isaiah Doe; Larbi, Emmanuel Tettey

2015-01-01

Objective Just as HIV prevention programs need to be tailored to the local epidemic, so should evaluations be country-owned and country-led to ensure use of those results in decision making and policy. The objective of this paper is to describe the process undertaken in Ghana to develop a national evaluation plan for the Ghana national strategy for key populations. Methods This was a participatory process that involved meetings between the Ghana AIDS Commission (GAC), other partners in Ghana working to prevent HIV among key populations, and MEASURE Evaluation. The process included three two-day, highly structured yet participatory meetings over the course of 12 months during which participants shared information about on-going and planned data and identified research questions and methods. Results An evaluation plan was prepared to inform stakeholders about which data collection activities need to be prioritized for funding, who would implement the study, the timing of data collection, the research question the data will help answer, and the analysis methods. The plan discusses various methods that can be used including the recommendation for the study design using multiple data sources. It has an evaluation conceptual model, proposed analyses, proposed definition of independent variables, estimated costs for filling data gaps, roles and responsibilities of stakeholders to carry out the plan, and considerations for ethics, data sharing and authorship. Conclusion The experience demonstrates that it is possible to design an evaluation responsive to national strategies and priorities with country leadership, regardless of stakeholders' experiences with evaluations. This process may be replicable elsewhere, where stakeholders want to plan and implement an evaluation of a large-scale program at the national or subnational level that is responsive to national priorities and part of a comprehensive monitoring and evaluation system. PMID:26120495

Management of the General Process of Parenteral Nutrition Using mHealth Technologies: Evaluation and Validation Study

PubMed Central

2018-01-01

Background Any system applied to the control of parenteral nutrition (PN) ought to prove that the process meets the established requirements and include a repository of records to allow evaluation of the information about PN processes at any time. Objective The goal of the research was to evaluate the mobile health (mHealth) app and validate its effectiveness in monitoring the management of the PN process. Methods We studied the evaluation and validation of the general process of PN using an mHealth app. The units of analysis were the PN bags prepared and administered at the Son Espases University Hospital, Palma, Spain, from June 1 to September 6, 2016. For the evaluation of the app, we used the Poststudy System Usability Questionnaire and subsequent analysis with the Cronbach alpha coefficient. Validation was performed by checking the compliance of control for all operations on each of the stages (validation and transcription of the prescription, preparation, conservation, and administration) and by monitoring the operative control points and critical control points. Results The results obtained from 387 bags were analyzed, with 30 interruptions of administration. The fulfillment of stages was 100%, including noncritical nonconformities in the storage control. The average deviation in the weight of the bags was less than 5%, and the infusion time did not present deviations greater than 1 hour. Conclusions The developed app successfully passed the evaluation and validation tests and was implemented to perform the monitoring procedures for the overall PN process. A new mobile solution to manage the quality and traceability of sensitive medicines such as blood-derivative drugs and hazardous drugs derived from this project is currently being deployed. PMID:29615389

Thermal and Surface Evaluation on The Process of Forming a Cu2O/CuO Semiconductor Photocatalyst on a Thin Copper Plate

NASA Astrophysics Data System (ADS)

Zainul, R.; Oktavia, B.; Dewata, I.; Efendi, J.

2018-04-01

This research aims to investigate the process of forming a multi-scale copper oxide semiconductor (CuO/Cu2O) through a process of calcining a copper plate. The changes that occur during the formation of the oxide are thermally and surface evaluated. Evaluation using Differential Thermal Analysis (DTA) obtained by surface change of copper plate happened at temperature 380°C. Calcination of oxide formation was carried out at temperature 380°C for 1 hour. Surface evaluation process by using Scanning Electron Microscope (SEM) surface and cross-section, to determine diffusion of oxide formation on copper plate. The material composition is monitored by XRF and XRD to explain the process of structural and physical changes of the copper oxide plate formed during the heating process. The thickness of Cu plates used is 200-250 μm. SEM analysis results, the oxygen atom interruption region is in the range of 20-30 μm, and diffuses deeper during thermal oxidation process. The maximum diffusion depth of oxygen atoms reaches 129 μm.

How Ontologies are Made: Studying the Hidden Social Dynamics Behind Collaborative Ontology Engineering Projects.

PubMed

Strohmaier, Markus; Walk, Simon; Pöschko, Jan; Lamprecht, Daniel; Tudorache, Tania; Nyulas, Csongor; Musen, Mark A; Noy, Natalya F

2013-05-01

Traditionally, evaluation methods in the field of semantic technologies have focused on the end result of ontology engineering efforts, mainly, on evaluating ontologies and their corresponding qualities and characteristics. This focus has led to the development of a whole arsenal of ontology-evaluation techniques that investigate the quality of ontologies as a product . In this paper, we aim to shed light on the process of ontology engineering construction by introducing and applying a set of measures to analyze hidden social dynamics. We argue that especially for ontologies which are constructed collaboratively, understanding the social processes that have led to its construction is critical not only in understanding but consequently also in evaluating the ontology. With the work presented in this paper, we aim to expose the texture of collaborative ontology engineering processes that is otherwise left invisible. Using historical change-log data, we unveil qualitative differences and commonalities between different collaborative ontology engineering projects. Explaining and understanding these differences will help us to better comprehend the role and importance of social factors in collaborative ontology engineering projects. We hope that our analysis will spur a new line of evaluation techniques that view ontologies not as the static result of deliberations among domain experts, but as a dynamic, collaborative and iterative process that needs to be understood, evaluated and managed in itself. We believe that advances in this direction would help our community to expand the existing arsenal of ontology evaluation techniques towards more holistic approaches.

How Ontologies are Made: Studying the Hidden Social Dynamics Behind Collaborative Ontology Engineering Projects

PubMed Central

Strohmaier, Markus; Walk, Simon; Pöschko, Jan; Lamprecht, Daniel; Tudorache, Tania; Nyulas, Csongor; Musen, Mark A.; Noy, Natalya F.

2013-01-01

Traditionally, evaluation methods in the field of semantic technologies have focused on the end result of ontology engineering efforts, mainly, on evaluating ontologies and their corresponding qualities and characteristics. This focus has led to the development of a whole arsenal of ontology-evaluation techniques that investigate the quality of ontologies as a product. In this paper, we aim to shed light on the process of ontology engineering construction by introducing and applying a set of measures to analyze hidden social dynamics. We argue that especially for ontologies which are constructed collaboratively, understanding the social processes that have led to its construction is critical not only in understanding but consequently also in evaluating the ontology. With the work presented in this paper, we aim to expose the texture of collaborative ontology engineering processes that is otherwise left invisible. Using historical change-log data, we unveil qualitative differences and commonalities between different collaborative ontology engineering projects. Explaining and understanding these differences will help us to better comprehend the role and importance of social factors in collaborative ontology engineering projects. We hope that our analysis will spur a new line of evaluation techniques that view ontologies not as the static result of deliberations among domain experts, but as a dynamic, collaborative and iterative process that needs to be understood, evaluated and managed in itself. We believe that advances in this direction would help our community to expand the existing arsenal of ontology evaluation techniques towards more holistic approaches. PMID:24311994

Wastewater treatment evaluation for enterprises based on fuzzy-AHP comprehensive evaluation: a case study in industrial park in Taihu Basin, China.

PubMed

Hu, Wei; Liu, Guangbing; Tu, Yong

2016-01-01

This paper applied the fuzzy comprehensive evaluation (FCE) technique and analytic hierarchy process (AHP) procedure to evaluate the wastewater treatment for enterprises. Based on the characteristics of wastewater treatment for enterprises in Taihu basin, an evaluating index system was established for enterprise and analysis hierarchy process method was applied to determine index weight. Then the AHP and FCE methods were combined to validate the wastewater treatment level of 3 representative enterprises. The results show that the evaluation grade of enterprise 1, enterprise 2 and enterprise 3 was middle, good and excellent, respectively. Finally, the scores of 3 enterprises were calculated according to the hundred-mark system, and enterprise 3 has the highest wastewater treatment level, followed by enterprise 2 and enterprises 1. The application of this work can make the evaluation results more scientific and accurate. It is expected that this work may serve as an assistance tool for managers of enterprise in improving the wastewater treatment level.

Decision Oriented Evaluation in Education: The Case of Israel.

ERIC Educational Resources Information Center

Lewy, A.; Kugelmass, S.

This book contains a series of papers presented at an Israel-American seminar on Educational Evaluation. Sol Kugelmass describes strategies employed to increase the utilization of evaluation results in the process of formulating educational policy. Nachum Blass illustrates the relationship between evaluation and policymaking by discussing an…

Integrating Human Factors into Crew Exploration Vehicle (CEV) Design

NASA Technical Reports Server (NTRS)

Whitmore, Mihriban; Holden, Kritina; Baggerman, Susan; Campbell, Paul

2007-01-01

The purpose of this design process is to apply Human Engineering (HE) requirements and guidelines to hardware/software and to provide HE design, analysis and evaluation of crew interfaces. The topics include: 1) Background/Purpose; 2) HE Activities; 3) CASE STUDY: Net Habitable Volume (NHV) Study; 4) CASE STUDY: Human Modeling Approach; 5) CASE STUDY: Human Modeling Results; 6) CASE STUDY: Human Modeling Conclusions; 7) CASE STUDY: Human-in-the-Loop Evaluation Approach; 8) CASE STUDY: Unsuited Evaluation Results; 9) CASE STUDY: Suited Evaluation Results; 10) CASE STUDY: Human-in-the-Loop Evaluation Conclusions; 11) Near-Term Plan; and 12) In Conclusion

Evaluation matters: lessons learned on the evaluation of surgical teaching.

PubMed

Woods, Nicole N

2011-01-01

The traditional system of academic promotion and tenure can make it difficult to reward those who excel at surgical teaching. A successful faculty evaluation process can provide the objective measures of teaching performance needed for performance appraisals and promotion decisions. Over the course of two decades, an extensive faculty evaluation process has been developed in the Department of Surgery at the University of Toronto. This paper presents some of the non-psychometric characteristics of that system. Faculty awareness of the evaluation process, the consistency of its application, trainee anonymity and the materiality of the results are described key factors of a faculty evaluation system that meets the assessment needs of individual teachers and raises the profile of teaching in surgical departments. Copyright © 2010 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

Methodology for Evaluating Raw Material Changes to RSRM Elastomeric Insulation Materials

NASA Technical Reports Server (NTRS)

Mildenhall, Scott D.; McCool, Alex (Technical Monitor)

2001-01-01

The Reusable Solid Rocket Motor (RSRM) uses asbestos and silicon dioxide filled acrylonitrile butadiene rubber (AS-NBR) as the primary internal insulation to protect the case from heat. During the course of the RSRM Program, several changes have been made to the raw materials and processing of the AS-NBR elastomeric insulation material. These changes have been primarily caused by raw materials becoming obsolete. In addition, some process changes have been implemented that were deemed necessary to improve the quality and consistency of the AS-NBR insulation material. Each change has been evaluated using unique test efforts customized to determine the potential impacts of the specific raw material or process change. Following the evaluations, the various raw material and process changes were successfully implemented with no detectable effect on the performance of the AS-NBR insulation. This paper will discuss some of the raw material and process changes evaluated, the methodology used in designing the unique test plans, and the general evaluation results. A summary of the change history of RSRM AS-NBR internal insulation is also presented.

15 CFR 2301.10 - Applications resulting from catastrophic damage or emergency situations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... natural or manmade disaster, or as the result of complete equipment failure, and is in dire need of...) The application will be subject to the same evaluation and selection process followed for applications... evaluation and selection to permit an appropriately timely decision. ...

15 CFR 2301.10 - Applications resulting from catastrophic damage or emergency situations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... natural or manmade disaster, or as the result of complete equipment failure, and is in dire need of...) The application will be subject to the same evaluation and selection process followed for applications... evaluation and selection to permit an appropriately timely decision. ...

Physical and sensory quality of Java Arabica green coffee beans

NASA Astrophysics Data System (ADS)

Sunarharum, W. B.; Yuwono, S. S.; Pangestu, N. B. S. W.; Nadhiroh, H.

2018-03-01

Demand on high quality coffee for consumption is continually increasing not only in the consuming countries (importers) but also in the producing countries (exporters). Coffee quality could be affected by several factors from farm to cup including the post-harvest processing methods. This research aimed to investigate the influence of different post-harvest processing methods on physical and sensory quality of Java Arabica green coffee beans. The two factors being evaluated were three different post-harvest processing methods to produce green coffee beans (natural/dry, semi-washed and fully-washed processing) under sun drying. Physical quality evaluation was based on The Indonesian National Standard (SNI 01-2907-2008) while sensory quality was evaluated by five expert judges. The result shows that less defects observed in wet processed coffee as compared to the dry processing. The mechanical drying was also proven to yield a higher quality green coffee beans and minimise losses.

Effect of Explicit Evaluation on Neural Connectivity Related to Listening to Unfamiliar Music

PubMed Central

Liu, Chao; Brattico, Elvira; Abu-jamous, Basel; Pereira, Carlos S.; Jacobsen, Thomas; Nandi, Asoke K.

2017-01-01

People can experience different emotions when listening to music. A growing number of studies have investigated the brain structures and neural connectivities associated with perceived emotions. However, very little is known about the effect of an explicit act of judgment on the neural processing of emotionally-valenced music. In this study, we adopted the novel consensus clustering paradigm, called binarisation of consensus partition matrices (Bi-CoPaM), to study whether and how the conscious aesthetic evaluation of the music would modulate brain connectivity networks related to emotion and reward processing. Participants listened to music under three conditions – one involving a non-evaluative judgment, one involving an explicit evaluative aesthetic judgment, and one involving no judgment at all (passive listening only). During non-evaluative attentive listening we obtained auditory-limbic connectivity whereas when participants were asked to decide explicitly whether they liked or disliked the music excerpt, only two clusters of intercommunicating brain regions were found: one including areas related to auditory processing and action observation, and the other comprising higher-order structures involved with visual processing. Results indicate that explicit evaluative judgment has an impact on the neural auditory-limbic connectivity during affective processing of music. PMID:29311874

The relationship of post-event processing to self-evaluation of performance in social anxiety.

PubMed

Brozovich, Faith; Heimberg, Richard G

2011-06-01

Socially anxious and control participants engaged in a social interaction with a confederate and then wrote about themselves or the other person (i.e., self-focused post-event processing [SF-PEP] vs. other-focused post-event processing [OF-PEP]) and completed several questionnaires. One week later, participants completed measures concerning their evaluation of their performance in the social interaction and the degree to which they engaged in post-event processing (PEP) during the week. Socially anxious individuals evaluated their performance in the social interaction more poorly than control participants, both immediately after and 1 week later. Socially anxious individuals assigned to the SF-PEP condition displayed fewer positive feelings about their performance compared to the socially anxious individuals in the OF-PEP condition as well as controls in either condition. Also, the trait tendency to engage in PEP moderated the effect of social anxiety on participants' evaluation of their performance in the interaction, such that high socially anxious individuals with high trait PEP scores evaluated themselves in the interaction more negatively at the later assessment. These results suggest that PEP and other self-evaluative processes may perpetuate the cycle of social anxiety. Copyright © 2011. Published by Elsevier Ltd.

The PD COMM trial: a protocol for the process evaluation of a randomised trial assessing the effectiveness of two types of SLT for people with Parkinson's disease.

PubMed

Masterson-Algar, Patricia; Burton, Christopher R; Brady, Marian C; Nicoll, Avril; Clarke, Carl E; Rick, Caroline; Hughes, Max; Au, Pui; Smith, Christina H; Sackley, Catherine M

2017-08-29

The PD COMM trial is a phase III multi-centre randomised controlled trial whose aim is to evaluate the effectiveness and cost-effectiveness of two approaches to speech and language therapy (SLT) compared with no SLT intervention (control) for people with Parkinson's disease who have self-reported or carer-reported problems with their speech or voice. Our protocol describes the process evaluation embedded within the outcome evaluation whose aim is to evaluate what happened at the time of the PD COMM intervention implementation and to provide findings that will assist in the interpretation of the PD COMM trial results. Furthermore, the aim of the PD COMM process evaluation is to investigate intervention complexity within a theoretical model of how the trialled interventions might work best and why. Drawing from the Normalization Process Theory and frameworks for implementation fidelity, a mixed method design will be used to address process evaluation research questions. Therapists' and participants' perceptions and experiences will be investigated via in-depth interviews. Critical incident reports, baseline survey data from therapists, treatment record forms and home practice diaries also will be collected at relevant time points throughout the running of the PD COMM trial. Process evaluation data will be analysed independently of the outcome evaluation before the two sets of data are then combined. To date, there are a limited number of published process evaluation protocols, and few are linked to trials investigating rehabilitation therapies. Providing a strong theoretical framework underpinning design choices and being tailored to meet the complex characteristics of the trialled interventions, our process evaluation has the potential to provide valuable insight into which components of the interventions being delivered in PD COMM worked best (and what did not), how they worked well and why. ISRCTN Registry, ISRCTN12421382 . Registered on 18 April 2016.

[Process evaluation in relation to effectiveness assessment: experiences with school-based programs].

PubMed

Ariza, Carles; Villalbí, Joan R; Sánchez-Martínez, Francesca; Nebot, Manel

2011-06-01

Evaluation of public health interventions usually focus on the quality of design and research methods, and less on the quality of the intervention or process evaluation. In process evaluation of school-based interventions, key issues are how completely the intervention is carried out and adherence to the protocol. In addition, exploration of intermediate variables, such as those that influence (and often predict) preventable behavior, is highly useful. This article describes the basic concepts in this topic, using examples of the effectiveness of some preventive interventions carried out in schools. The interventions discussed were mainly quasi-experimental studies, based on data from programs promoted by public health teams in the city of Barcelona. Data from process evaluation of preventive programs in secondary schools that underwent formal assessment of their effectiveness is provided. The examples are drawn from preventive programs of HIV infection or unprotected sexual intercourse (PRESSEC program) and drug consumption prevention (the PASE, PASE.bcn and x kpts programs). These examples show why the intervention process influences the impact of the programs and their results. Thorough planning of process evaluation is essential to obtain valid indicators that will identify, in the effectiveness evaluation of the intervention, the most efficacious strategies to obtain positive outcomes. Copyright © 2011 Sociedad Española de Salud Pública y Administración Sanitaria. Published by Elsevier Espana. All rights reserved.

National Security Technology Incubator Evaluation Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

This report describes the process by which the National Security Technology Incubator (NSTI) will be evaluated. The technology incubator is being developed as part of the National Security Preparedness Project (NSPP), funded by a Department of Energy (DOE)/National Nuclear Security Administration (NNSA) grant. This report includes a brief description of the components, steps, and measures of the proposed evaluation process. The purpose of the NSPP is to promote national security technologies through business incubation, technology demonstration and validation, and workforce development. The NSTI will focus on serving businesses with national security technology applications by nurturing them through critical stages ofmore » early development. An effective evaluation process of the NSTI is an important step as it can provide qualitative and quantitative information on incubator performance over a given period. The vision of the NSTI is to be a successful incubator of technologies and private enterprise that assist the NNSA in meeting new challenges in national safety and security. The mission of the NSTI is to identify, incubate, and accelerate technologies with national security applications at various stages of development by providing hands-on mentoring and business assistance to small businesses and emerging or growing companies. To achieve success for both incubator businesses and the NSTI program, an evaluation process is essential to effectively measure results and implement corrective processes in the incubation design if needed. The evaluation process design will collect and analyze qualitative and quantitative data through performance evaluation system.« less

Are there two processes in reasoning? The dimensionality of inductive and deductive inferences.

PubMed

Stephens, Rachel G; Dunn, John C; Hayes, Brett K

2018-03-01

Single-process accounts of reasoning propose that the same cognitive mechanisms underlie inductive and deductive inferences. In contrast, dual-process accounts propose that these inferences depend upon 2 qualitatively different mechanisms. To distinguish between these accounts, we derived a set of single-process and dual-process models based on an overarching signal detection framework. We then used signed difference analysis to test each model against data from an argument evaluation task, in which induction and deduction judgments are elicited for sets of valid and invalid arguments. Three data sets were analyzed: data from Singmann and Klauer (2011), a database of argument evaluation studies, and the results of an experiment designed to test model predictions. Of the large set of testable models, we found that almost all could be rejected, including all 2-dimensional models. The only testable model able to account for all 3 data sets was a model with 1 dimension of argument strength and independent decision criteria for induction and deduction judgments. We conclude that despite the popularity of dual-process accounts, current results from the argument evaluation task are best explained by a single-process account that incorporates separate decision thresholds for inductive and deductive inferences. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Bench-scale performance testing and economic analyses of electrostatic dry coal cleaning. Final report, October 1980-July 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rich, S.R.

1987-02-01

The report gives results of preliminary performance evaluations and economic analyses of the Advanced Energy Dynamics (AED) electrostatic dry coal-cleaning process. Grab samples of coal-feed-product coals were obtained from 25 operating physical coal-cleaning (PCC) plants. These samples were analyzed for ash, sulfur, and energy content and splits of the original samples of feed run-of-mine coal were provided for bench-scale testing in an electrostatic separation apparatus. The process showed superior sulfur-removal performance at equivalent cost and energy-recovery levels. The ash-removal capability of the process was not evaluated completely: overall, ash-removal results indicated that the process did not perform as well asmore » the PCC plants.« less

Collection Evaluation in a Georgia Elementary School: A Look at the Process and Resulting Change in Teachers' Perceptions of Its Quality and Usefulness.

ERIC Educational Resources Information Center

Willcoxon, Wanda Odom

2001-01-01

Describes methods used to revitalize a media collection in a DeKalb County, Georgia elementary school. Explains collection development issues; collection evaluation, including curriculum mapping, collection mapping, and weeding; reorganization, made possible through weeding; results of recency analyses; and results of teacher surveys that…

Descriptive and evaluative judgment processes: behavioral and electrophysiological indices of processing symmetry and aesthetics.

PubMed

Jacobsen, Thomas; Höfel, Lea

2003-12-01

Descriptive symmetry and evaluative aesthetic judgment processes were compared using identical stimuli in both judgment tasks. Electrophysiological activity was recorded while participants judged novel formal graphic patterns in a trial-by-trial cuing setting using binary responses (symmetric, not symmetric; beautiful, not beautiful). Judgment analyses of a Phase 1 test and main experiment performance resulted in individual models, as well as group models, of the participants' judgment systems. Symmetry showed a strong positive correlation with beautiful judgments and was the most important cue. Descriptive judgments were performed faster than evaluative judgments. The ERPs revealed a phasic, early frontal negativity for the not-beautiful judgments. A sustained posterior negativity was observed in the symmetric condition. All conditions showed late positive potentials (LPPs). Evaluative judgment LPPs revealed a more pronounced right lateralization. It is argued that the present aesthetic judgments engage a two-stage process consisting of early, anterior frontomedian impression formation after 300 msec and right-hemisphere evaluative categorization around 600 msec after onset of the graphic patterns.

7 CFR 3430.608 - Review criteria.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) Evaluation criteria. NIFA shall evaluate project proposals according to the following factors: (1) Relevancy.... (5) The adequacy of plans for the participatory evaluation process, outcome-based reporting, and the communication of findings and results beyond the immediate target audience. (6) Other appropriate factors, as...

7 CFR 3430.608 - Review criteria.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) Evaluation criteria. NIFA shall evaluate project proposals according to the following factors: (1) Relevancy.... (5) The adequacy of plans for the participatory evaluation process, outcome-based reporting, and the communication of findings and results beyond the immediate target audience. (6) Other appropriate factors, as...

7 CFR 3430.608 - Review criteria.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) Evaluation criteria. NIFA shall evaluate project proposals according to the following factors: (1) Relevancy.... (5) The adequacy of plans for the participatory evaluation process, outcome-based reporting, and the communication of findings and results beyond the immediate target audience. (6) Other appropriate factors, as...

Does a time constraint modify results from rating-based conjoint analysis? Case study with orange/pomegranate juice bottles.

PubMed

Reis, Felipe; Machín, Leandro; Rosenthal, Amauri; Deliza, Rosires; Ares, Gastón

2016-12-01

People do not usually process all the available information on packages for making their food choices and rely on heuristics for making their decisions, particularly when having limited time. However, in most consumer studies encourage participants to invest a lot of time for making their choices. Therefore, imposing a time-constraint in consumer studies may increase their ecological validity. In this context, the aim of the present work was to evaluate the influence of a time-constraint on consumer evaluation of pomegranate/orange juice bottles using rating-based conjoint task. A consumer study with 100 participants was carried out, in which they had to evaluate 16 pomegranate/orange fruit juice bottles, differing in bottle design, front-of-pack nutritional information, nutrition claim and processing claim, and to rate their intention to purchase. Half of the participants evaluated the bottle images without time constraint and the other half had a time-constraint of 3s for evaluating each image. Eye-movements were recorded during the evaluation. Results showed that time-constraint when evaluating intention to purchase did not largely modify the way in which consumers visually processed bottle images. Regardless of the experimental condition (with or without time constraint), they tended to evaluate the same product characteristics and to give them the same relative importance. However, a trend towards a more superficial evaluation of the bottles that skipped complex information was observed. Regarding the influence of product characteristics on consumer intention to purchase, bottle design was the variable with the largest relative importance in both conditions, overriding the influence of nutritional or processing characteristics, which stresses the importance of graphic design in shaping consumer perception. Copyright © 2016 Elsevier Ltd. All rights reserved.

Factors influencing the results of faculty evaluation in Isfahan University of Medical Sciences

PubMed Central

Kamali, Farahnaz; Yamani, Nikoo; Changiz, Tahereh; Zoubin, Fatemeh

2018-01-01

OBJECTIVE: This study aimed to explore factors influencing the results of faculty member evaluation from the viewpoints of faculty members affiliated with Isfahan University of Medical Sciences, Isfahan, Iran. MATERIALS AND METHODS: This qualitative study was done using a conventional content analysis method. Participants were faculty members of Isfahan University of Medical Sciences who, considering maximum variation in sampling, were chosen with a purposive sampling method. Semi-structured interviews were held with 11 faculty members until data saturation was reached. The interviews were transcribed verbatim and analyzed with conventional content analysis method for theme development. Further, the MAXQDA software was used for data management. RESULTS: The data analysis led to the development of two main themes, namely, “characteristics of the educational system” and “characteristics of the faculty member evaluation system.” The first main theme consists of three categories, i.e. “characteristics of influential people in evaluation,” “features of the courses,” and “background characteristics.” The other theme has the following as its categories: “evaluation methods,” “evaluation tools,” “evaluation process,” and “application of evaluation results.” Each category will have its subcategories. CONCLUSIONS: Many factors affect the evaluation of faculty members that should be taken into account by educational policymakers for improving the quality of the educational process. In addition to the factors that directly influence the educational system, methodological problems in the evaluation system need special attention. PMID:29417073

Evaluation of anti-sticking layers performances for 200mm wafer scale Smart NILTM process through surface and defectivity characterizations

NASA Astrophysics Data System (ADS)

Delachat, F.; Phillipe, J.-C.; Larrey, V.; Fournel, F.; Bos, S.; Teyssèdre, H.; Chevalier, Xavier; Nicolet, Célia; Navarro, Christophe; Cayrefourcq, Ian

2018-03-01

In this work, an evaluation of various ASL processes for 200 mm wafer scale in the HERCULES® NIL equipment platform available at the CEA-Leti through the INSPIRE program is reported. The surface and adherence energies were correlated to the AFM and defectivity results in order to select the most promising ASL process for high resolution etch mask applications. The ASL performances of the selected process were evaluated by multiple working stamp fabrication using unpatterned and patterned masters though defectivity monitoring on optical based-inspection tools. Optical and SEM defect reviews were systematically performed. Multiple working stamps fabrication without degradation of the master defectivity was witnessed. This evaluation enabled to benchmark several ASL solutions based on the grafted technology develop by ARKEMA in order to reduce and optimize the soft stamp defectivity prior to its replication and therefore considerably reduce the final imprint defectivity for the Smart NIL process.

Counting to ten milliseconds: low-anger, but not high-anger, individuals pause following negative evaluations.

PubMed

Robinson, Michael D; Wilkowski, Benjamin M; Meier, Brian P; Moeller, Sara K; Fetterman, Adam K

2012-01-01

Low-anger individuals are less reactive, both emotionally and behaviourally, to a large variety of situational primes to anger and aggression. Why this is so, from an affective processing perspective, has been largely conjectural. Four studies (total N=270) sought to link individual differences in anger to tendencies exhibited in basic affective processing tasks. On the basis of motivational factors and considerations, it was hypothesised that negative evaluations would differentially activate a psychological alarm system at low levels of anger, resulting in a pause that should be evident in the speed of making subsequent evaluations. Just such a pattern was evident in all studies. By contrast, high-anger individuals did not pause following their negative evaluations. In relation to this affective processing tendency, at least, dramatically different effects were observed among low- versus high-anger individuals. Implications for the personality-processing literature, theories of trait anger, and fast-acting regulatory processes are discussed.

How to convince your manager to invest in an HIS preimplementation methodology for appraisal of material, process and human costs and benefits.

PubMed Central

Bossard, B.; Renard, J. M.; Capelle, P.; Paradis, P.; Beuscart, M. C.

2000-01-01

Investing in information technology has become a crucial process in hospital management today. Medical and administrative managers are faced with difficulties in measuring medical information technology costs and benefits due to the complexity of the domain. This paper proposes a preimplementation methodology for evaluating and appraising material, process and human costs and benefits. Based on the users needs and organizational process analysis, the methodology provides an evaluative set of financial and non financial indicators which can be integrated in a decision making and investment evaluation process. We describe the first results obtained after a few months of operation for the Computer-Based Patient Record (CPR) project. Its full acceptance, in spite of some difficulties, encourages us to diffuse the method for the entire project. PMID:11079851

"Rate My Therapist": Automated Detection of Empathy in Drug and Alcohol Counseling via Speech and Language Processing.

PubMed

Xiao, Bo; Imel, Zac E; Georgiou, Panayiotis G; Atkins, David C; Narayanan, Shrikanth S

2015-01-01

The technology for evaluating patient-provider interactions in psychotherapy-observational coding-has not changed in 70 years. It is labor-intensive, error prone, and expensive, limiting its use in evaluating psychotherapy in the real world. Engineering solutions from speech and language processing provide new methods for the automatic evaluation of provider ratings from session recordings. The primary data are 200 Motivational Interviewing (MI) sessions from a study on MI training methods with observer ratings of counselor empathy. Automatic Speech Recognition (ASR) was used to transcribe sessions, and the resulting words were used in a text-based predictive model of empathy. Two supporting datasets trained the speech processing tasks including ASR (1200 transcripts from heterogeneous psychotherapy sessions and 153 transcripts and session recordings from 5 MI clinical trials). The accuracy of computationally-derived empathy ratings were evaluated against human ratings for each provider. Computationally-derived empathy scores and classifications (high vs. low) were highly accurate against human-based codes and classifications, with a correlation of 0.65 and F-score (a weighted average of sensitivity and specificity) of 0.86, respectively. Empathy prediction using human transcription as input (as opposed to ASR) resulted in a slight increase in prediction accuracies, suggesting that the fully automatic system with ASR is relatively robust. Using speech and language processing methods, it is possible to generate accurate predictions of provider performance in psychotherapy from audio recordings alone. This technology can support large-scale evaluation of psychotherapy for dissemination and process studies.

Cognitive and Social Processes Predicting Partner Psychological Adaptation to Early Stage Breast Cancer

PubMed Central

Manne, Sharon; Ostroff, Jamie; Fox, Kevin; Grana, Generosa; Winkel, Gary

2009-01-01

Introduction The diagnosis and subsequent treatment for early stage breast cancer is stressful for partners. Little is known about the role of cognitive and social processes predicting the longitudinal course of partners’ psychosocial adaptation. This study evaluated the role of cognitive and social processing in partner psychological adaptation to early stage breast cancer, evaluating both main and moderator effect models. Moderating effects for meaning-making, acceptance, and positive reappraisal on the predictive association of searching for meaning, emotional processing, and emotional expression on partner psychological distress were examined. Materials and Methods Partners of women diagnosed with early stage breast cancer were evaluated shortly after the ill partner’s diagnosis (n= 253), nine (n = 167), and 18 months (n = 149) later. Partners completed measures of emotional expression, emotional processing, acceptance, meaning-making, and general and cancer-specific distress at all time points. Results Lower satisfaction with partner support predicted greater global distress, and greater use of positive reappraisal was associated with greater distress. The predicted moderator effects for found meaning on the associations between the search for meaning and cancer-specific distress were found and similar moderating effects for positive reappraisal on the associations between emotional expression and global distress and for acceptance on the association between emotional processing and cancer-specific distress were found. Conclusions Results indicate several cognitive-social processes directly predict partner distress. However, moderator effect models in which the effects of partners’ processing depends upon whether these efforts result changes in perceptions of the cancer experience may add to the understanding of partners’ adaptation to cancer. PMID:18435865

A new method for selectively enhancing hemisphere processing: voice frequency amplification influences the strength of attribute framing.

PubMed

McCormick, Michael; Seta, John J

2012-01-01

An attribute framing effect occurs when positive or negative associations produced by positive or negative frames are mapped onto evaluations resulting in a more favourable evaluation for the positively framed attribute. We used a new voice frequency manipulation to differentially enhance right versus left hemisphere processing. In doing so we found a strong attribute framing effect when a speaker with a low-frequency voice enhanced the contextual processing style of the right hemisphere. However, a framing effect was not obtained when a speaker with a high-frequency voice enhanced the inferential/analytical processing style of the left hemisphere. At the theoretical level our results provide evidence that the contextual processing style of the right hemisphere is especially susceptible to associative implications, such as those found in attribute framing manipulations. At the applied level we provide a simple method for altering the effectiveness of persuasion messages.

JPEG XS call for proposals subjective evaluations

NASA Astrophysics Data System (ADS)

McNally, David; Bruylants, Tim; Willème, Alexandre; Ebrahimi, Touradj; Schelkens, Peter; Macq, Benoit

2017-09-01

In March 2016 the Joint Photographic Experts Group (JPEG), formally known as ISO/IEC SC29 WG1, issued a call for proposals soliciting compression technologies for a low-latency, lightweight and visually transparent video compression scheme. Within the JPEG family of standards, this scheme was denominated JPEG XS. The subjective evaluation of visually lossless compressed video sequences at high resolutions and bit depths poses particular challenges. This paper describes the adopted procedures, the subjective evaluation setup, the evaluation process and summarizes the obtained results which were achieved in the context of the JPEG XS standardization process.

Event-related potentials reveal task-dependence and inter-individual differences in negation processing during silent listening and explicit truth-value evaluation.

PubMed

Herbert, C; Kissler, J

2014-09-26

In sentences such as dogs cannot fly/bark, evaluation of the truth-value of the sentence is assumed to appear after the negation has been integrated into the sentence structure. Moreover negation processing and truth-value processing are considered effortful processes, whereas processing of the semantic relatedness of the words within sentences is thought to occur automatically. In the present study, modulation of event-related brain potentials (N400 and late positive potential, LPP) was investigated during an implicit task (silent listening) and active truth-value evaluation to test these theoretical assumptions and determine if truth-value evaluation will be modulated by the way participants processed the negated information implicitly prior to truth-value verification. Participants first listened to negated sentences and then evaluated these sentences for their truth-value in an active evaluation task. During passive listening, the LPP was generally more pronounced for targets in false negative (FN) than true negative (TN) sentences, indicating enhanced attention allocation to semantically-related but false targets. N400 modulation by truth-value (FN>TN) was observed in 11 out of 24 participants. However, during active evaluation, processing of semantically-unrelated but true targets (TN) elicited larger N400 and LPP amplitudes as well as a pronounced frontal negativity. This pattern was particularly prominent in those 11 individuals, whose N400 modulation during silent listening indicated that they were more sensitive to violations of the truth-value than to semantic priming effects. The results provide evidence for implicit truth-value processing during silent listening of negated sentences and for task dependence related to inter-individual differences in implicit negation processing. Copyright © 2014 IBRO. Published by Elsevier Ltd. All rights reserved.

Measuring Spontaneous and Instructed Evaluation Processes during Web Search: Integrating Concurrent Thinking-Aloud Protocols and Eye-Tracking Data

ERIC Educational Resources Information Center

Gerjets, Peter; Kammerer, Yvonne; Werner, Benita

2011-01-01

Web searching for complex information requires to appropriately evaluating diverse sources of information. Information science studies identified different criteria applied by searchers to evaluate Web information. However, the explicit evaluation instructions used in these studies might have resulted in a distortion of spontaneous evaluation…

Responding to Ambiguity, Responding to Change the Value of a Responsive Approach to Evaluation.

ERIC Educational Resources Information Center

Abma, T. A.

2000-01-01

Evaluated the success of a palliative health care team in a Dutch health region. Results show that it is more appropriate to acknowledge ambiguity and facilitate its handling as part of dynamic learning processes. Discusses the usefulness of a responsive approach to evaluation, evaluation methodology, and learning experiences. (SLD)

[RehaFuturReal®: Evaluation of Implementation in Organizational Structure and in Counseling Process - An Overview of Results].

PubMed

Arling, V; Knispel, J; Spijkers, W

2016-08-01

Due to prevailing future challenges in vocational rehabilitation, development process RehaFutur (BMAS) was initiated. In this context, recommendations were made to secure a future-oriented, innovative vocational rehabilitation in Germany. Deutsche Rentenversicherung (DRV) Westfalen transferred these recommendations into a new and applicable counseling concept RehaFutuReal(®). Rehabilitation managers (RM) are central protagonists in counseling process. Therefore, RehaFuturReal(®) focused on optimization of counseling performance. To achieve this aim, rehabilitation managers were taught to work with a case management (CM) based approach. RWTH Aachen supported RehaFuturReal(®) from an academic point of view and conducted a formative and summative evaluation. Primary aim of RWTH Aachen was to support DRV Westfalen during implementation of RehaFuturReal(®) into their organizational structure. Additionally, RWTH Aachen controlled whether transfer of RehaFutuReal(®) in counseling process was successful. From 04-01-13 until 12-31-14, RehaFuturReal(®) was tested by DRV Westfalen in the intervention district Dortmund with 10 RM. There were 3 selection criteria for the overall sample of N=320 insurants: participants were required to have an active employment status, suffered from integration issues and were in need of support to achieve vocational integration. Evaluation of RehaFuturReal(®) was realized summative (pre-post-comparison) and formative (process-orientated). Evaluative judgment regarding implementation in organizational structure and counseling process was performed by using three-stage-concept of Donabedian (quality of structure, process and results). Thereby, feedback of RM, insurants and employers was taken into account. Analysis of evaluation results revealed a positive overall impression. Implementation into organizational structure was successful on all 3 quality stages: concept of project and CM-training were an adequate basis and appropriately put into practice by fulfilling prescribed objectives, topics and schedule (quality of structure). Rehabilitation managers identified themselves with the implementation process into DRV Westfalen (grading of CM training: M=1,67; SD=0,65; quality of process). Analogous, consultants reported a high level of satisfaction during implementation of new counseling process (possible span: 1-4; M=3,11; SD=0,33; quality of results). Regarding implementation of counseling process, sample fitted into 3 selection criteria wherefore the correct insurants were picked in RehaFuturReal(®) (quality of structure). CM-orientated counseling approach was properly implemented into everyday work of RM by using CM-instruments for documentation (quality of process). RM were highly satisfied (possible span: 1-4) with counseling performance (M=3,43; SD=0,77). Employers also rated counseling performance positively (M=3,38; SD=0,85). By contrast, surveying insurants revealed a heterogeneous impression of satisfaction (M=2,97; SD=1,03) (quality of results). © Georg Thieme Verlag KG Stuttgart · New York.

Performance in physiology evaluation: possible improvement by active learning strategies.

PubMed

Montrezor, Luís H

2016-12-01

The evaluation process is complex and extremely important in the teaching/learning process. Evaluations are constantly employed in the classroom to assist students in the learning process and to help teachers improve the teaching process. The use of active methodologies encourages students to participate in the learning process, encourages interaction with their peers, and stimulates thinking about physiological mechanisms. This study examined the performance of medical students on physiology over four semesters with and without active engagement methodologies. Four activities were used: a puzzle, a board game, a debate, and a video. The results show that engaging in activities with active methodologies before a physiology cognitive monitoring test significantly improved student performance compared with not performing the activities. We integrate the use of these methodologies with classic lectures, and this integration appears to improve the teaching/learning process in the discipline of physiology and improves the integration of physiology with cardiology and neurology. In addition, students enjoy the activities and perform better on their evaluations when they use them. Copyright © 2016 The American Physiological Society.

Thermographic process monitoring in powderbed based additive manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krauss, Harald, E-mail: harald.krauss@iwb.tum.de; Zaeh, Michael F.; Zeugner, Thomas

2015-03-31

Selective Laser Melting is utilized to build metallic parts directly from CAD-Data by solidification of thin powder layers through application of a fast scanning laser beam. In this study layerwise monitoring of the temperature distribution is used to gather information about the process stability and the resulting part quality. The heat distribution varies with different kinds of parameters including scan vector length, laser power, layer thickness and inter-part distance in the job layout which in turn influence the resulting part quality. By integration of an off-axis mounted uncooled thermal detector the solidification as well as the layer deposition are monitoredmore » and evaluated. Errors in the generation of new powder layers usually result in a locally varying layer thickness that may cause poor part quality. For effect quantification, the locally applied layer thickness is determined by evaluating the heat-up of the newly deposited powder. During the solidification process space and time-resolved data is used to characterize the zone of elevated temperatures and to derive locally varying heat dissipation properties. Potential quality indicators are evaluated and correlated to the resulting part quality: Thermal diffusivity is derived from a simplified heat dissipation model and evaluated for every pixel and cool-down phase of a layer. This allows the quantification of expected material homogeneity properties. Maximum temperature and time above certain temperatures are measured in order to detect hot spots or delamination issues that may cause a process breakdown. Furthermore, a method for quantification of sputter activity is presented. Since high sputter activity indicates unstable melt dynamics this can be used to identify parameter drifts, improper atmospheric conditions or material binding errors. The resulting surface structure after solidification complicates temperature determination on the one hand but enables the detection of potential surface defects on the other hand. These issues and proper key figures for thermographic monitoring of the Selective Laser Melting process are discussed in the paper. Even though microbolometric temperature measurement is limited to repetition rates in the Hz-regime and sub megapixel resolution, current results show the feasibility of process surveillance by thermography for a limited section of the building platform in a commercial system.« less

Thermographic process monitoring in powderbed based additive manufacturing

NASA Astrophysics Data System (ADS)

Krauss, Harald; Zeugner, Thomas; Zaeh, Michael F.

2015-03-01

Selective Laser Melting is utilized to build metallic parts directly from CAD-Data by solidification of thin powder layers through application of a fast scanning laser beam. In this study layerwise monitoring of the temperature distribution is used to gather information about the process stability and the resulting part quality. The heat distribution varies with different kinds of parameters including scan vector length, laser power, layer thickness and inter-part distance in the job layout which in turn influence the resulting part quality. By integration of an off-axis mounted uncooled thermal detector the solidification as well as the layer deposition are monitored and evaluated. Errors in the generation of new powder layers usually result in a locally varying layer thickness that may cause poor part quality. For effect quantification, the locally applied layer thickness is determined by evaluating the heat-up of the newly deposited powder. During the solidification process space and time-resolved data is used to characterize the zone of elevated temperatures and to derive locally varying heat dissipation properties. Potential quality indicators are evaluated and correlated to the resulting part quality: Thermal diffusivity is derived from a simplified heat dissipation model and evaluated for every pixel and cool-down phase of a layer. This allows the quantification of expected material homogeneity properties. Maximum temperature and time above certain temperatures are measured in order to detect hot spots or delamination issues that may cause a process breakdown. Furthermore, a method for quantification of sputter activity is presented. Since high sputter activity indicates unstable melt dynamics this can be used to identify parameter drifts, improper atmospheric conditions or material binding errors. The resulting surface structure after solidification complicates temperature determination on the one hand but enables the detection of potential surface defects on the other hand. These issues and proper key figures for thermographic monitoring of the Selective Laser Melting process are discussed in the paper. Even though microbolometric temperature measurement is limited to repetition rates in the Hz-regime and sub megapixel resolution, current results show the feasibility of process surveillance by thermography for a limited section of the building platform in a commercial system.

Conceptual Chemical Process Design for Sustainability. ...

EPA Pesticide Factsheets

This chapter examines the sustainable design of chemical processes, with a focus on conceptual design, hierarchical and short-cut methods, and analyses of process sustainability for alternatives. The chapter describes a methodology for incorporating process sustainability analyses throughout the conceptual design. Hierarchical and short-cut decision-making methods will be used to approach sustainability. An example showing a sustainability-based evaluation of chlor-alkali production processes is presented with economic analysis and five pollutants described as emissions. These emissions are analyzed according to their human toxicity potential by ingestion using the Waste Reduction Algorithm and a method based on US Environmental Protection Agency reference doses, with the addition of biodegradation for suitable components. Among the emissions, mercury as an element will not biodegrade, and results show the importance of this pollutant to the potential toxicity results and therefore the sustainability of the process design. The dominance of mercury in determining the long-term toxicity results when energy use is included suggests that all process system evaluations should (re)consider the role of mercury and other non-/slow-degrading pollutants in sustainability analyses. The cycling of nondegrading pollutants through the biosphere suggests the need for a complete analysis based on the economic, environmental, and social aspects of sustainability. Chapter reviews

IARC monographs: 40 years of evaluating carcinogenic hazards to humans.

PubMed

Pearce, Neil; Blair, Aaron; Vineis, Paolo; Ahrens, Wolfgang; Andersen, Aage; Anto, Josep M; Armstrong, Bruce K; Baccarelli, Andrea A; Beland, Frederick A; Berrington, Amy; Bertazzi, Pier Alberto; Birnbaum, Linda S; Brownson, Ross C; Bucher, John R; Cantor, Kenneth P; Cardis, Elisabeth; Cherrie, John W; Christiani, David C; Cocco, Pierluigi; Coggon, David; Comba, Pietro; Demers, Paul A; Dement, John M; Douwes, Jeroen; Eisen, Ellen A; Engel, Lawrence S; Fenske, Richard A; Fleming, Lora E; Fletcher, Tony; Fontham, Elizabeth; Forastiere, Francesco; Frentzel-Beyme, Rainer; Fritschi, Lin; Gerin, Michel; Goldberg, Marcel; Grandjean, Philippe; Grimsrud, Tom K; Gustavsson, Per; Haines, Andy; Hartge, Patricia; Hansen, Johnni; Hauptmann, Michael; Heederik, Dick; Hemminki, Kari; Hemon, Denis; Hertz-Picciotto, Irva; Hoppin, Jane A; Huff, James; Jarvholm, Bengt; Kang, Daehee; Karagas, Margaret R; Kjaerheim, Kristina; Kjuus, Helge; Kogevinas, Manolis; Kriebel, David; Kristensen, Petter; Kromhout, Hans; Laden, Francine; Lebailly, Pierre; LeMasters, Grace; Lubin, Jay H; Lynch, Charles F; Lynge, Elsebeth; 't Mannetje, Andrea; McMichael, Anthony J; McLaughlin, John R; Marrett, Loraine; Martuzzi, Marco; Merchant, James A; Merler, Enzo; Merletti, Franco; Miller, Anthony; Mirer, Franklin E; Monson, Richard; Nordby, Karl-Cristian; Olshan, Andrew F; Parent, Marie-Elise; Perera, Frederica P; Perry, Melissa J; Pesatori, Angela Cecilia; Pirastu, Roberta; Porta, Miquel; Pukkala, Eero; Rice, Carol; Richardson, David B; Ritter, Leonard; Ritz, Beate; Ronckers, Cecile M; Rushton, Lesley; Rusiecki, Jennifer A; Rusyn, Ivan; Samet, Jonathan M; Sandler, Dale P; de Sanjose, Silvia; Schernhammer, Eva; Costantini, Adele Seniori; Seixas, Noah; Shy, Carl; Siemiatycki, Jack; Silverman, Debra T; Simonato, Lorenzo; Smith, Allan H; Smith, Martyn T; Spinelli, John J; Spitz, Margaret R; Stallones, Lorann; Stayner, Leslie T; Steenland, Kyle; Stenzel, Mark; Stewart, Bernard W; Stewart, Patricia A; Symanski, Elaine; Terracini, Benedetto; Tolbert, Paige E; Vainio, Harri; Vena, John; Vermeulen, Roel; Victora, Cesar G; Ward, Elizabeth M; Weinberg, Clarice R; Weisenburger, Dennis; Wesseling, Catharina; Weiderpass, Elisabete; Zahm, Shelia Hoar

2015-06-01

Recently, the International Agency for Research on Cancer (IARC) Programme for the Evaluation of Carcinogenic Risks to Humans has been criticized for several of its evaluations, and also for the approach used to perform these evaluations. Some critics have claimed that failures of IARC Working Groups to recognize study weaknesses and biases of Working Group members have led to inappropriate classification of a number of agents as carcinogenic to humans. The authors of this Commentary are scientists from various disciplines relevant to the identification and hazard evaluation of human carcinogens. We examined criticisms of the IARC classification process to determine the validity of these concerns. Here, we present the results of that examination, review the history of IARC evaluations, and describe how the IARC evaluations are performed. We concluded that these recent criticisms are unconvincing. The procedures employed by IARC to assemble Working Groups of scientists from the various disciplines and the techniques followed to review the literature and perform hazard assessment of various agents provide a balanced evaluation and an appropriate indication of the weight of the evidence. Some disagreement by individual scientists to some evaluations is not evidence of process failure. The review process has been modified over time and will undoubtedly be altered in the future to improve the process. Any process can in theory be improved, and we would support continued review and improvement of the IARC processes. This does not mean, however, that the current procedures are flawed. The IARC Monographs have made, and continue to make, major contributions to the scientific underpinning for societal actions to improve the public's health.

Post Occupancy Evaluation of Educational Buildings and Equipment.

ERIC Educational Resources Information Center

Watson, Chris

1997-01-01

Details the post occupancy evaluation (POE) process for public buildings. POEs are used to improve design and optimize educational building and equipment use. The evaluation participants, the method used, the results and recommendations, model schools, and classroom alterations using POE are described. (9 references.) (RE)

DEMONSTRATION OF WELLMAN-LORD/ALLIED CHEMICAL FGD TECHNOLOGY: DEMONSTRATION TEST SECOND YEAR RESULTS

EPA Science Inventory

The report gives results of an evaluation of the performance (over a 2-year period) of a full-scale flue gas desulfurization (FGD) unit to demonstrate the Wellman-Lord/Allied Chemical process. The process is regenerable, employing sodium sulfite wet scrubbing, thermal regeneratio...

Three-dimensional non-destructive optical evaluation of laser-processing performance using optical coherence tomography.

PubMed

Kim, Youngseop; Choi, Eun Seo; Kwak, Wooseop; Shin, Yongjin; Jung, Woonggyu; Ahn, Yeh-Chan; Chen, Zhongping

2008-06-01

We demonstrate the use of optical coherence tomography (OCT) as a non-destructive diagnostic tool for evaluating laser-processing performance by imaging the features of a pit and a rim. A pit formed on a material at different laser-processing conditions is imaged using both a conventional scanning electron microscope (SEM) and OCT. Then using corresponding images, the geometrical characteristics of the pit are analyzed and compared. From the results, we could verify the feasibility and the potential of the application of OCT to the monitoring of the laser-processing performance.

CRT image recording evaluation

NASA Technical Reports Server (NTRS)

1971-01-01

Performance capabilities and limitations of a fiber optic coupled line scan CRT image recording system were investigated. The test program evaluated the following components: (1). P31 phosphor CRT with EMA faceplate; (2). P31 phosphor CRT with clear clad faceplate; (3). Type 7743 semi-gloss dry process positive print paper; (4). Type 777 flat finish dry process positive print paper; (5). Type 7842 dry process positive film; and (6). Type 1971 semi-gloss wet process positive print paper. Detailed test procedures used in each test are provided along with a description of each test, the test data, and an analysis of the results.

Three-dimensional non-destructive optical evaluation of laser-processing performance using optical coherence tomography

PubMed Central

Kim, Youngseop; Choi, Eun Seo; Kwak, Wooseop; Shin, Yongjin; Jung, Woonggyu; Ahn, Yeh-Chan; Chen, Zhongping

2014-01-01

We demonstrate the use of optical coherence tomography (OCT) as a non-destructive diagnostic tool for evaluating laser-processing performance by imaging the features of a pit and a rim. A pit formed on a material at different laser-processing conditions is imaged using both a conventional scanning electron microscope (SEM) and OCT. Then using corresponding images, the geometrical characteristics of the pit are analyzed and compared. From the results, we could verify the feasibility and the potential of the application of OCT to the monitoring of the laser-processing performance. PMID:24932051

Evaluation utilization research--developing a theory and putting it to use.

PubMed

Neuman, Ari; Shahor, Neria; Shina, Ilan; Sarid, Anat; Saar, Zehava

2013-02-01

This article presents the findings of a two-stage study that had two key objectives: to develop a theory about evaluation utilization in an educational organization and to apply this theory to promote evaluation utilization within the organization. The first stage involved a theoretical conceptualization using a participatory method of concept mapping. This process identified the modes of evaluation utilization within the organization, produced a representation of the relationship between them and led to a theory. The second stage examined the practical implications of this conceptualization in terms of how different stakeholders in the organization perceive the actual and preferable state of evaluation utilization within the organization (i.e. to what extent is evaluation utilized and to what extent should it be utilized). The participatory process of the study promoted the evaluation utilization by involving stakeholders, thus giving them a sense of ownership and improving communication between the evaluation unit and the stakeholders. In addition, understanding the evaluation needs of the stakeholders in the organization helped generate relevant and realizable evaluation processes. On a practical level, the results are currently shaping the evaluation plan and the place of evaluations within the organization. Copyright © 2012 Elsevier Ltd. All rights reserved.

Evaluation Planning, Evaluation Management, and Utilization of Evaluation Results within Adult Literacy Campaigns, Programs and Projects (with Implications for Adult Basic Education and Nonformal Education Programs in General). A Working Paper.

ERIC Educational Resources Information Center

Bhola, H. S.

Addressed to professionals involved in program evaluation, this working paper covers various aspects of evaluation planning, including the following: planning as a sociotechnical process, steps in evaluation planning, program planning and implementation versus evaluation planning and implementation, the literacy system and its subsystems, and some…

Automated processing of whole blood units: operational value and in vitro quality of final blood components

PubMed Central

Jurado, Marisa; Algora, Manuel; Garcia-Sanchez, Félix; Vico, Santiago; Rodriguez, Eva; Perez, Sonia; Barbolla, Luz

2012-01-01

Background The Community Transfusion Centre in Madrid currently processes whole blood using a conventional procedure (Compomat, Fresenius) followed by automated processing of buffy coats with the OrbiSac system (CaridianBCT). The Atreus 3C system (CaridianBCT) automates the production of red blood cells, plasma and an interim platelet unit from a whole blood unit. Interim platelet unit are pooled to produce a transfusable platelet unit. In this study the Atreus 3C system was evaluated and compared to the routine method with regards to product quality and operational value. Materials and methods Over a 5-week period 810 whole blood units were processed using the Atreus 3C system. The attributes of the automated process were compared to those of the routine method by assessing productivity, space, equipment and staffing requirements. The data obtained were evaluated in order to estimate the impact of implementing the Atreus 3C system in the routine setting of the blood centre. Yield and in vitro quality of the final blood components processed with the two systems were evaluated and compared. Results The Atreus 3C system enabled higher throughput while requiring less space and employee time by decreasing the amount of equipment and processing time per unit of whole blood processed. Whole blood units processed on the Atreus 3C system gave a higher platelet yield, a similar amount of red blood cells and a smaller volume of plasma. Discussion These results support the conclusion that the Atreus 3C system produces blood components meeting quality requirements while providing a high operational efficiency. Implementation of the Atreus 3C system could result in a large organisational improvement. PMID:22044958

Factors influencing the results of faculty evaluation in Isfahan University of Medical Sciences.

PubMed

Kamali, Farahnaz; Yamani, Nikoo; Changiz, Tahereh; Zoubin, Fatemeh

2018-01-01

This study aimed to explore factors influencing the results of faculty member evaluation from the viewpoints of faculty members affiliated with Isfahan University of Medical Sciences, Isfahan, Iran. This qualitative study was done using a conventional content analysis method. Participants were faculty members of Isfahan University of Medical Sciences who, considering maximum variation in sampling, were chosen with a purposive sampling method. Semi-structured interviews were held with 11 faculty members until data saturation was reached. The interviews were transcribed verbatim and analyzed with conventional content analysis method for theme development. Further, the MAXQDA software was used for data management. The data analysis led to the development of two main themes, namely, "characteristics of the educational system" and "characteristics of the faculty member evaluation system." The first main theme consists of three categories, i.e. "characteristics of influential people in evaluation," "features of the courses," and "background characteristics." The other theme has the following as its categories: "evaluation methods," "evaluation tools," "evaluation process," and "application of evaluation results." Each category will have its subcategories. Many factors affect the evaluation of faculty members that should be taken into account by educational policymakers for improving the quality of the educational process. In addition to the factors that directly influence the educational system, methodological problems in the evaluation system need special attention.

A STUDY OF CURRICULUM CHANGES IN SELECTED TWO-YEAR COLLEGES INITIATED BY THE EVALUATION PROCESS USED BY THE MIDDLE STATES ASSOCIATION.

ERIC Educational Resources Information Center

BRASE, PETER CHARLES, JR.

DURING THE 1-YEAR PERIOD FOLLOWING ACCREDITATION COMMITTEE VISITS TO FOUR JUNIOR COLLEGES, THE AUTHOR VISITED THESE INSTITUTIONS AND STUDIED THEIR SELF-EVALUATION REPORTS AND THE VISITING COMMITTEE REPORTS, IN AN EFFORT TO DETERMINE THE EFFECTS OF THE ACCREDITATION PROCESS ON THE QUALITY OF INSTRUCTION. WHILE ACTIONS WERE TAKEN AS RESULTS OF BOTH…

The Effects of Word Processing Software on User Satisfaction: An Empirical Study of Micro, Mini, and Mainframe Computers Using an Interactive Artificial Intelligence Expert-System.

ERIC Educational Resources Information Center

Rushinek, Avi; Rushinek, Sara

1984-01-01

Describes results of a system rating study in which users responded to WPS (word processing software) questions. Study objectives were data collection and evaluation of variables; statistical quantification of WPS's contribution (along with other variables) to user satisfaction; design of an expert system to evaluate WPS; and database update and…

Process Evaluation of a Store-Based Environmental Obesity Intervention on Two American Indian Reservations

ERIC Educational Resources Information Center

Curran, Sarah; Gittelsohn, Joel; Anliker, Jean; Ethelbah, Becky; Blake, Kelly; Sharma, Sangita; Caballero, Benjamin

2005-01-01

Obesity and other diet-related chronic diseases are widespread in American Indian communities. Inadequate access to healthy food on many reservations has led to a high-fat, high-sugar diet. The purpose of this paper is to report on the results of the process evaluation of a food store-based program to improve diet on two American Indian…

Quality measurement and benchmarking of HPV vaccination services: a new approach.

PubMed

Maurici, Massimo; Paulon, Luca; Campolongo, Alessandra; Meleleo, Cristina; Carlino, Cristiana; Giordani, Alessandro; Perrelli, Fabrizio; Sgricia, Stefano; Ferrante, Maurizio; Franco, Elisabetta

2014-01-01

A new measurement process based upon a well-defined mathematical model was applied to evaluate the quality of human papillomavirus (HPV) vaccination centers in 3 of 12 Local Health Units (ASLs) within the Lazio Region of Italy. The quality aspects considered for evaluation were communicational efficiency, organizational efficiency and comfort. The overall maximum achievable value was 86.10%, while the HPV vaccination quality scores for ASL1, ASL2 and ASL3 were 73.07%, 71.08%, and 67.21%, respectively. With this new approach it is possible to represent the probabilistic reasoning of a stakeholder who evaluates the quality of a healthcare provider. All ASLs had margins for improvements and optimal quality results can be assessed in terms of better performance conditions, confirming the relationship between the resulting quality scores and HPV vaccination coverage. The measurement process was structured into three steps and involved four stakeholder categories: doctors, nurses, parents and vaccinated women. In Step 1, questionnaires were administered to collect different stakeholders' points of view (i.e., subjective data) that were elaborated to obtain the best and worst performance conditions when delivering a healthcare service. Step 2 of the process involved the gathering of performance data during the service delivery (i.e., objective data collection). Step 3 of the process involved the elaboration of all data: subjective data from step 1 are used to define a "standard" to test objective data from step 2. This entire process led to the creation of a set of scorecards. Benchmarking is presented as a result of the probabilistic meaning of the evaluated scores.

Is evaluative conditioning really uncontrollable? A comparative test of three emotion-focused strategies to prevent the acquisition of conditioned preferences.

PubMed

Gawronski, Bertram; Mitchell, Derek G V; Balas, Robert

2015-10-01

Evaluative conditioning (EC) is defined as the change in the evaluation of a conditioned stimulus (CS) because of its pairing with a valenced unconditioned stimulus (US). Counter to views that EC is the product of automatic learning processes, recent research has revealed various characteristics of nonautomatic processing in EC. The current research investigated the controllability of EC by testing the effectiveness of 3 emotion-focused strategies in preventing the acquisition of conditioned preferences: (a) suppression of emotional reactions to the US, (b) reappraisal of the valence of the US, and (c) facial blocking of emotional responses. Although all 3 strategies reduced EC effects on self-reported evaluations by impairing recollective memory for CS-US pairings, they were ineffective in reducing EC effects on an evaluative priming measure. Regardless of the measure, effective control did not depend on the level of arousal elicited by the US. The results suggest that the 3 strategies can influence deliberate CS evaluations through memory-related processes, but they are ineffective in reducing EC effects on spontaneous evaluative responses. Implications for mental process theories of EC are discussed. (c) 2015 APA, all rights reserved).

Improving Reliability of a Residency Interview Process

PubMed Central

Serres, Michelle L.; Gundrum, Todd E.

2013-01-01

Objective. To improve the reliability and discrimination of a pharmacy resident interview evaluation form, and thereby improve the reliability of the interview process. Methods. In phase 1 of the study, authors used a Many-Facet Rasch Measurement model to optimize an existing evaluation form for reliability and discrimination. In phase 2, interviewer pairs used the modified evaluation form within 4 separate interview stations. In phase 3, 8 interviewers individually-evaluated each candidate in one-on-one interviews. Results. In phase 1, the evaluation form had a reliability of 0.98 with person separation of 6.56; reproducibly, the form separated applicants into 6 distinct groups. Using that form in phase 2 and 3, our largest variation source was candidates, while content specificity was the next largest variation source. The phase 2 g-coefficient was 0.787, while confirmatory phase 3 was 0.922. Process reliability improved with more stations despite fewer interviewers per station—impact of content specificity was greatly reduced with more interview stations. Conclusion. A more reliable, discriminating evaluation form was developed to evaluate candidates during resident interviews, and a process was designed that reduced the impact from content specificity. PMID:24159209

Construction of mammographic examination process ontology using bottom-up hierarchical task analysis.

PubMed

Yagahara, Ayako; Yokooka, Yuki; Jiang, Guoqian; Tsuji, Shintarou; Fukuda, Akihisa; Nishimoto, Naoki; Kurowarabi, Kunio; Ogasawara, Katsuhiko

2018-03-01

Describing complex mammography examination processes is important for improving the quality of mammograms. It is often difficult for experienced radiologic technologists to explain the process because their techniques depend on their experience and intuition. In our previous study, we analyzed the process using a new bottom-up hierarchical task analysis and identified key components of the process. Leveraging the results of the previous study, the purpose of this study was to construct a mammographic examination process ontology to formally describe the relationships between the process and image evaluation criteria to improve the quality of mammograms. First, we identified and created root classes: task, plan, and clinical image evaluation (CIE). Second, we described an "is-a" relation referring to the result of the previous study and the structure of the CIE. Third, the procedural steps in the ontology were described using the new properties: "isPerformedBefore," "isPerformedAfter," and "isPerformedAfterIfNecessary." Finally, the relationships between tasks and CIEs were described using the "isAffectedBy" property to represent the influence of the process on image quality. In total, there were 219 classes in the ontology. By introducing new properties related to the process flow, a sophisticated mammography examination process could be visualized. In relationships between tasks and CIEs, it became clear that the tasks affecting the evaluation criteria related to positioning were greater in number than those for image quality. We developed a mammographic examination process ontology that makes knowledge explicit for a comprehensive mammography process. Our research will support education and help promote knowledge sharing about mammography examination expertise.

A comprehensive model to evaluate implementation of the world health organization framework convention of tobacco control

PubMed Central

Sarrafzadegan, Nizal; Kelishad, Roya; Rabiei, Katayoun; Abedi, Heidarali; Mohaseli, Khadijeh Fereydoun; Masooleh, Hasan Azaripour; Alavi, Mousa; Heidari, Gholamreza; Ghaffari, Mostafa; O’Loughlin, Jennifer

2012-01-01

Background: Iran is one of the countries that has ratified the World Health Organization Framework Convention of Tobacco Control (WHO-FCTC), and has implemented a series of tobacco control interventions including the Comprehensive Tobacco Control Law. Enforcement of this legislation and assessment of its outcome requires a dedicated evaluation system. This study aimed to develop a generic model to evaluate the implementation of the Comprehensive Tobacco Control Law in Iran that was provided based on WHO-FCTC articles. Materials and Methods: Using a grounded theory approach, qualitative data were collected from 265 subjects in individual interviews and focus group discussions with policymakers who designed the legislation, key stakeholders, and members of the target community. In addition, field observations data in supermarkets/shops, restaurants, teahouses and coffee shops were collected. Data were analyzed in two stages through conceptual theoretical coding. Findings: Overall, 617 open codes were extracted from the data into tables; 72 level-3 codes were retained from the level-2 code series. Using a Model Met paradigm, the relationships between the components of each paradigm were depicted graphically. The evaluation model entailed three levels, namely: short-term results, process evaluation and long-term results. Conclusions: Central concept of the process of evaluation is that enforcing the law influences a variety of internal and environmental factors including legislative changes. These factors will be examined during the process evaluation and context evaluation. The current model can be applicable for providing FCTC evaluation tools across other jurisdictions. PMID:23833621

Primary Health Care and tuberculosis: services evaluation.

PubMed

Wysocki, Anneliese Domingues; Ponce, Maria Amélia Zanon; Brunello, Maria Eugênia Firmino; Beraldo, Aline Ale; Vendramini, Silvia Helena Figueiredo; Scatena, Lúcia Marina; Ruffino, Antonio; Villa, Tereza Cristina Scatena

2017-01-01

In order to control tuberculosis, the Brazilian Ministry of Health recommends the decentralization of control actions directed to the Primary Health Care, and there are few studies on the performance of the Tuberculosis Control Program in decentralized contexts. To evaluate the performance of Primary Health Care services in tuberculosis treatment. This is an evaluative study with cross-sectional approach conducted in 2011. Two hundred and thirty-nine health professionals from Primary Health Care units were interviewed using a structured instrument based on the evaluation reference of the health services quality (structure - process - results). The performance of these services was analyzed applying techniques of descriptive statistics, validation, and construction of indicators and by determining the reduced variable "Z". The indicators "participation of professionals in tuberculosis patients' care" (structure) and "reference and counterreference" (process) had the best evaluations, whereas "professional training" (structure) and "external actions for tuberculosis control" (process) had the worst results. The decentralization of tuberculosis control actions has been taking place in a vertical manner in Primary Health Care. The challenge of controlling tuberculosis involves overcoming constraints related to the engagement, training, and turnover rates among health professionals, which is a coordination between services and monitoring of control actions in Primary Health Care.

The Decision Making Trial and Evaluation Laboratory (Dematel) and Analytic Network Process (ANP) for Safety Management System Evaluation Performance

NASA Astrophysics Data System (ADS)

Rolita, Lisa; Surarso, Bayu; Gernowo, Rahmat

2018-02-01

In order to improve airport safety management system (SMS) performance, an evaluation system is required to improve on current shortcomings and maximize safety. This study suggests the integration of the DEMATEL and ANP methods in decision making processes by analyzing causal relations between the relevant criteria and taking effective analysis-based decision. The DEMATEL method builds on the ANP method in identifying the interdependencies between criteria. The input data consists of questionnaire data obtained online and then stored in an online database. Furthermore, the questionnaire data is processed using DEMATEL and ANP methods to obtain the results of determining the relationship between criteria and criteria that need to be evaluated. The study cases on this evaluation system were Adi Sutjipto International Airport, Yogyakarta (JOG); Ahmad Yani International Airport, Semarang (SRG); and Adi Sumarmo International Airport, Surakarta (SOC). The integration grades SMS performance criterion weights in a descending order as follow: safety and destination policy, safety risk management, healthcare, and safety awareness. Sturges' formula classified the results into nine grades. JOG and SMG airports were in grade 8, while SOG airport was in grade 7.

A study for high accuracy measurement of residual stress by deep hole drilling technique

NASA Astrophysics Data System (ADS)

Kitano, Houichi; Okano, Shigetaka; Mochizuki, Masahito

2012-08-01

The deep hole drilling technique (DHD) received much attention in recent years as a method for measuring through-thickness residual stresses. However, some accuracy problems occur when residual stress evaluation is performed by the DHD technique. One of the reasons is that the traditional DHD evaluation formula applies to the plane stress condition. The second is that the effects of the plastic deformation produced in the drilling process and the deformation produced in the trepanning process are ignored. In this study, a modified evaluation formula, which is applied to the plane strain condition, is proposed. In addition, a new procedure is proposed which can consider the effects of the deformation produced in the DHD process by investigating the effects in detail by finite element (FE) analysis. Then, the evaluation results obtained by the new procedure are compared with that obtained by traditional DHD procedure by FE analysis. As a result, the new procedure evaluates the residual stress fields better than the traditional DHD procedure when the measuring object is thick enough that the stress condition can be assumed as the plane strain condition as in the model used in this study.

The effect of image sharpness on quantitative eye movement data and on image quality evaluation while viewing natural images

NASA Astrophysics Data System (ADS)

Vuori, Tero; Olkkonen, Maria

2006-01-01

The aim of the study is to test both customer image quality rating (subjective image quality) and physical measurement of user behavior (eye movements tracking) to find customer satisfaction differences in imaging technologies. Methodological aim is to find out whether eye movements could be quantitatively used in image quality preference studies. In general, we want to map objective or physically measurable image quality to subjective evaluations and eye movement data. We conducted a series of image quality tests, in which the test subjects evaluated image quality while we recorded their eye movements. Results show that eye movement parameters consistently change according to the instructions given to the user, and according to physical image quality, e.g. saccade duration increased with increasing blur. Results indicate that eye movement tracking could be used to differentiate image quality evaluation strategies that the users have. Results also show that eye movements would help mapping between technological and subjective image quality. Furthermore, these results give some empirical emphasis to top-down perception processes in image quality perception and evaluation by showing differences between perceptual processes in situations when cognitive task varies.

"Compassion, pleasantry, and hope": a process evaluation of a volunteer-based nonprofit.

PubMed

Mye, Sarah C; Moracco, Kathryn E

2015-06-01

As funders continue to emphasize the importance of documented results, nonprofit organizations must work to complete program evaluations that are both valuable and feasible. The purpose of this paper is to document a practical process evaluation of a southeastern nonprofit, a local Meals on Wheels. Using a mixed methods approach, we sought to answer four evaluation questions: (1) What are the essential program components, as identified by key stakeholders; (2) To what extent are volunteers implementing the identified essential components as intended; (3) What is the level of volunteer satisfaction with the program; and (4) What suggestions do stakeholders have for improving the program? Our findings indicate that most aspects of the program were implemented as intended, but inconsistencies occurred when volunteers were unsure of their assigned duties. In addition, volunteers had high levels of satisfaction and specific suggestions for improvement. From these results, we developed a conceptual model of factors contributing to quality of implementation and volunteer satisfaction that may be generalizable to other volunteer-based nonprofits. Specifically, we identified three factors that helped to facilitate satisfaction and performance: leadership, social contact, and fulfillment. Finally, this process evaluation demonstrates the feasibility of developing and implementing evaluation tools in similar organizations. Copyright © 2015 Elsevier Ltd. All rights reserved.

MEASUREMENT OF INDOOR AIR EMISSIONS FROM DRY-PROCESS PHOTOCOPY MACHINES

EPA Science Inventory

The article provides background information on indoor air emissions from office equipment, with emphasis on dry-process photocopy machines. The test method is described in detail along with results of a study to evaluate the test method using four dry-process photocopy machines. ...

Framework and criteria for program evaluation in the Office of Conservation and Renewable Energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This study addresses the development of a framework and generic criteria for conducting program evaluation in the Office of Conservation and Renewable Energy. The evaluation process is intended to provide the Assistant Secretary with comprehensive and consistent evaluation data for management decisions regarding policy and strategy, crosscutting energy impacts and resource allocation and justification. The study defines evaluation objectives, identifies basic information requirements (criteria), and identifies a process for collecting evaluation results at the basic program level, integrating the results, and summarizing information upward through the CE organization to the Assistant Secretary. Methods are described by which initial criteria weremore » tested, analyzed, and refined for CE program applicability. General guidelines pertaining to evaluation and the Sunset Review requirements are examined and various types, designs, and models for evaluation are identified. Existing CE evaluation reports are reviewed and comments on their adequacy for meeting current needs are provided. An inventory and status survey of CE program evaluation activities is presented, as are issues, findings, and recommendations pertaining to CE evaluation and Sunset Review requirements. Also, sources of data for use in evaluation and the Sunset Review response are identified. An inventory of CE evaluation-related documents and reports is provided.« less

How we remember the emotional intensity of past musical experiences

PubMed Central

Schäfer, Thomas; Zimmermann, Doreen; Sedlmeier, Peter

2014-01-01

Listening to music usually elicits emotions that can vary considerably in their intensity over the course of listening. Yet, after listening to a piece of music, people are easily able to evaluate the music's overall emotional intensity. There are two different hypotheses about how affective experiences are temporally processed and integrated: (1) all moments' intensities are integrated, resulting in an averaged value; (2) the overall evaluation is built from specific single moments, such as the moments of highest emotional intensity (peaks), the end, or a combination of these. Here we investigated what listeners do when building an overall evaluation of a musical experience. Participants listened to unknown songs and provided moment-to-moment ratings of experienced intensity of emotions. Subsequently, they evaluated the overall emotional intensity of each song. Results indicate that participants' evaluations were predominantly influenced by their average impression but that, in addition, the peaks and end emotional intensities contributed substantially. These results indicate that both types of processes play a role: All moments are integrated into an averaged value but single moments might be assigned a higher value in the calculation of this average. PMID:25177311

Ecotoxicological evaluation of diesel-contaminated soil before and after a bioremediation process.

PubMed

Molina-Barahona, L; Vega-Loyo, L; Guerrero, M; Ramírez, S; Romero, I; Vega-Jarquín, C; Albores, A

2005-02-01

Evaluation of contaminated sites is usually performed by chemical analysis of pollutants in soil. This is not enough either to evaluate the environmental risk of contaminated soil nor to evaluate the efficiency of soil cleanup techniques. Information on the bioavailability of complex mixtures of xenobiotics and degradation products cannot be totally provided by chemical analytical data, but results from bioassays can integrate the effects of pollutants in complex mixtures. In the preservation of human health and environment quality, it is important to assess the ecotoxicological effects of contaminated soils to obtain a better evaluation of the healthiness of this system. The monitoring of a diesel-contaminated soil and the evaluation of a bioremediation technique conducted on a microcosm scale were performed by a battery of ecotoxicological tests including phytotoxicity, Daphnia magna, and nematode assays. In this study we biostimulated the native microflora of soil contaminated with diesel by adding nutrients and crop residue (corn straw) as a bulking agent and as a source of microorganisms and nutrients; in addition, moisture was adjusted to enhance diesel removal. The bioremediation process efficiency was evaluated directly by an innovative, simple phytotoxicity test system and the diesel extracts by Daphnia magna and nematode assays. Contaminated soil samples were revealed to have toxic effects on seed germination, seedling growth, and Daphnia survival. After biostimulation, the diesel concentration was reduced by 50.6%, and the soil samples showed a significant reduction in phytotoxicity (9%-15%) and Daphnia assays (3-fold), confirming the effectiveness of the bioremediation process. Results from our microcosm study suggest that in addition to the evaluation of the bioremediation processes efficiency, toxicity testing is different with organisms representative of diverse phylogenic levels. The integration of analytical, toxicological and bioremediation data is necessary to properly assess the ecological risk of bioremediation processes. (c) 2005 Wiley Periodicals, Inc.

Automatized image processing of bovine blastocysts produced in vitro for quantitative variable determination

NASA Astrophysics Data System (ADS)

Rocha, José Celso; Passalia, Felipe José; Matos, Felipe Delestro; Takahashi, Maria Beatriz; Maserati, Marc Peter, Jr.; Alves, Mayra Fernanda; de Almeida, Tamie Guibu; Cardoso, Bruna Lopes; Basso, Andrea Cristina; Nogueira, Marcelo Fábio Gouveia

2017-12-01

There is currently no objective, real-time and non-invasive method for evaluating the quality of mammalian embryos. In this study, we processed images of in vitro produced bovine blastocysts to obtain a deeper comprehension of the embryonic morphological aspects that are related to the standard evaluation of blastocysts. Information was extracted from 482 digital images of blastocysts. The resulting imaging data were individually evaluated by three experienced embryologists who graded their quality. To avoid evaluation bias, each image was related to the modal value of the evaluations. Automated image processing produced 36 quantitative variables for each image. The images, the modal and individual quality grades, and the variables extracted could potentially be used in the development of artificial intelligence techniques (e.g., evolutionary algorithms and artificial neural networks), multivariate modelling and the study of defined structures of the whole blastocyst.

Evaluation of low-residue soldering for military and commercial applications: A report from the Low-Residue Soldering Task Force

DOE Office of Scientific and Technical Information (OSTI.GOV)

Iman, R.L.; Anderson, D.J.; Burress, R.V.

1995-06-01

The LRSTF combined the efforts of industry, military, and government to evaluate low-residue soldering processes for military and commercial applications. These processes were selected for evaluation because they provide a means for the military to support the presidential mandate while producing reliable hardware at a lower cost. This report presents the complete details and results of a testing program conducted by the LRSTF to evaluate low-residue soldering for printed wiring assemblies. A previous informal document provided details of the test plan used in this evaluation. Many of the details of that test plan are contained in this report. The testmore » data are too massive to include in this report, however, these data are available on disk as Excel spreadsheets upon request. The main purpose of low-residue soldering is to eliminate waste streams during the manufacturing process.« less

Evaluation of Ultrasonic Fiber Structure Extraction Technique Using Autopsy Specimens of Liver

NASA Astrophysics Data System (ADS)

Yamaguchi, Tadashi; Hirai, Kazuki; Yamada, Hiroyuki; Ebara, Masaaki; Hachiya, Hiroyuki

2005-06-01

It is very important to diagnose liver cirrhosis noninvasively and correctly. In our previous studies, we proposed a processing technique to detect changes in liver tissue in vivo. In this paper, we propose the evaluation of the relationship between liver disease and echo information using autopsy specimens of a human liver in vitro. It is possible to verify the function of a processing parameter clearly and to compare the processing result and the actual human liver tissue structure by in vitro experiment. In the results of our processing technique, information that did not obey a Rayleigh distribution from the echo signal of the autopsy liver specimens was extracted depending on changes in a particular processing parameter. The fiber tissue structure of the same specimen was extracted from a number of histological images of stained tissue. We constructed 3D structures using the information extracted from the echo signal and the fiber structure of the stained tissue and compared the two. By comparing the 3D structures, it is possible to evaluate the relationship between the information that does not obey a Rayleigh distribution of the echo signal and the fibrosis structure.

Separation of plastics: The importance of kinetics knowledge in the evaluation of froth flotation.

PubMed

Censori, Matteo; La Marca, Floriana; Carvalho, M Teresa

2016-08-01

Froth flotation is a promising technique to separate polymers of similar density. The present paper shows the need for performing kinetic tests to evaluate and optimize the process. In the experimental study, batch flotation tests were performed on samples of ABS and PS. The floated product was collected at increasing flotation time. Two variables were selected for modification: the concentration of the depressor (tannic acid) and airflow rate. The former is associated with the chemistry of the process and the latter with the transport of particles. It was shown that, like mineral flotation, plastics flotation can be adequately assumed as a first order rate process. The results of the kinetic tests showed that the kinetic parameters change with the operating conditions. When the depressing action is weak and the airflow rate is low, the kinetic is fast. Otherwise, the kinetic is slow and a variable percentage of the plastics never floats. Concomitantly, the time at which the maximum difference in the recovery of the plastics in the floated product is attained changes with the operating conditions. The prediction of flotation results, process evaluation and comparisons should be done considering the process kinetics. Copyright © 2016 Elsevier Ltd. All rights reserved.

Evaluating Web Usability

ERIC Educational Resources Information Center

Snider, Jean; Martin, Florence

2012-01-01

Web usability focuses on design elements and processes that make web pages easy to use. A website for college students was evaluated for underutilization. One-on-one testing, focus groups, web analytics, peer university review and marketing focus group and demographic data were utilized to conduct usability evaluation. The results indicated that…

TREATMENT PLANT EVALUATION DURING A WATERBORNE OUTBREAK

EPA Science Inventory

If a waterborne disease outbreak is the result of problems at a treatment plant, a thorough and careful evaluation of both process equipment and operating procedures would be needed. his evaluation should be done in a series of actions. hese actions are explained in this paper. h...

Analysis of consumer behavior in decision making of purchasing ornamental freshwater fish (case of study at ornamental freshwater fish market at Peta Street, Bandung)

NASA Astrophysics Data System (ADS)

Gumilar, I.; Rizal, A.; Sriati; Setiawan Putra, R.

2018-04-01

This research aim was to analyzed process of decision making of purchasing ornamental freshwater fish at Peta Street, Bandung City and Analyzed what factors are driving consumers to buy freshwater fish Peta Street. The method used in this research is case study with rating scale and rank spearman analysis. The sampling technique is the accidental random sampling method consist of 30 respondents. The consumer’s decision making process consist of five stages, namely the recognition of needs, information searching, alternative evaluation, process of purchasing, and the evaluation of results. The results showed that at the stage of recognition of needs the motivation of purchasing freshwater fish because respondents are very fond of ornamental freshwater fish, at the stage of information search, the information sources are from the print media and friends or neighborhood. At the stage of alternative evaluation, the reason consumers buy ornamental freshwater fish because the quality of good products. The stage of purchasing decision process consumers bought 1-5 fish with frequency of purchase 1 time per month. The evaluation of results of post-purchasing consumers feel very satisfied with the fish products and the price is very affordable. To observe the factors that influence purchasing motivation of consumers, spearman rank test is the method. The results showed that the quality and price of the product are the factors that most influence the purchase decision of ornamental freshwater fish with the range of student-t value 3,968 and 2,107.

Green Pea and Garlic Puree Model Food Development for Thermal Pasteurization Process Quality Evaluation.

PubMed

Bornhorst, Ellen R; Tang, Juming; Sablani, Shyam S; Barbosa-Cánovas, Gustavo V; Liu, Fang

2017-07-01

Development and selection of model foods is a critical part of microwave thermal process development, simulation validation, and optimization. Previously developed model foods for pasteurization process evaluation utilized Maillard reaction products as the time-temperature integrators, which resulted in similar temperature sensitivity among the models. The aim of this research was to develop additional model foods based on different time-temperature integrators, determine their dielectric properties and color change kinetics, and validate the optimal model food in hot water and microwave-assisted pasteurization processes. Color, quantified using a * value, was selected as the time-temperature indicator for green pea and garlic puree model foods. Results showed 915 MHz microwaves had a greater penetration depth into the green pea model food than the garlic. a * value reaction rates for the green pea model were approximately 4 times slower than in the garlic model food; slower reaction rates were preferred for the application of model food in this study, that is quality evaluation for a target process of 90 °C for 10 min at the cold spot. Pasteurization validation used the green pea model food and results showed that there were quantifiable differences between the color of the unheated control, hot water pasteurization, and microwave-assisted thermal pasteurization system. Both model foods developed in this research could be utilized for quality assessment and optimization of various thermal pasteurization processes. © 2017 Institute of Food Technologists®.

Initial evaluation and comparison of plasma damage to atomic layer carbon materials using conventional and low T{sub e} plasma sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jagtiani, Ashish V.; Miyazoe, Hiroyuki; Chang, Josephine

2016-01-15

The ability to achieve atomic layer precision is the utmost goal in the implementation of atomic layer etch technology. Carbon-based materials such as carbon nanotubes (CNTs) and graphene are single atomic layers of carbon with unique properties and, as such, represent the ultimate candidates to study the ability to process with atomic layer precision and assess impact of plasma damage to atomic layer materials. In this work, the authors use these materials to evaluate the atomic layer processing capabilities of electron beam generated plasmas. First, the authors evaluate damage to semiconducting CNTs when exposed to beam-generated plasmas and compare thesemore » results against the results using typical plasma used in semiconductor processing. The authors find that the beam generated plasma resulted in significantly lower current degradation in comparison to typical plasmas. Next, the authors evaluated the use of electron beam generated plasmas to process graphene-based devices by functionalizing graphene with fluorine, nitrogen, or oxygen to facilitate atomic layer deposition (ALD). The authors found that all adsorbed species resulted in successful ALD with varying impact on the transconductance of the graphene. Furthermore, the authors compare the ability of both beam generated plasma as well as a conventional low ion energy inductively coupled plasma (ICP) to remove silicon nitride (SiN) deposited on top of the graphene films. Our results indicate that, while both systems can remove SiN, an increase in the D/G ratio from 0.08 for unprocessed graphene to 0.22 to 0.26 for the beam generated plasma, while the ICP yielded values from 0.52 to 1.78. Generally, while some plasma-induced damage was seen for both plasma sources, a much wider process window as well as far less damage to CNTs and graphene was observed when using electron beam generated plasmas.« less

Process simulations for manufacturing of thick composites

NASA Astrophysics Data System (ADS)

Kempner, Evan A.

The availability of manufacturing simulations for composites can significantly reduce the costs associated with process development. Simulations provide a tool for evaluating the effect of processing conditions on the quality of parts produced without requiring numerous experiments. This is especially significant in parts that have troublesome features such as large thickness. The development of simulations for thick walled composites has been approached by examining the mechanics of resin flow and fiber deformation during processing, applying these evaluations to develop simulations, and evaluating the simulation with experimental results. A unified analysis is developed to describe the three-dimensional resin flow and fiber preform deformation during processing regardless of the manufacturing process used. It is shown how the generic governing evaluations in the unified analysis can be applied to autoclave molding, compression molding, pultrusion, filament winding, and resin transfer molding. A comparison is provided with earlier models derived individually for these processes. The evaluations described for autoclave curing were used to produce a one-dimensional cure simulation for autoclave curing of thick composites. The simulation consists of an analysis for heat transfer and resin flow in the composite as well as bleeder plies used to absorb resin removed from the part. Experiments were performed in a hot press to approximate curing in an autoclave. Graphite/epoxy laminates of 3 cm and 5 cm thickness were cured while monitoring temperatures at several points inside the laminate and thickness. The simulation predicted temperatures fairly closely, but difficulties were encountered in correlation of thickness results. This simulation was also used to study the effects of prepreg aging on processing of thick composites. An investigation was also performed on filament winding with prepreg tow. Cylinders were wound of approximately 12 mm thickness with pressure gages at the mandrel-composite interface. Cylinders were hoop wound with tensions ranging from 13-34 N. An analytical model was developed to calculate change in stress due to relaxation during winding. Although compressive circumferential stresses occurred throughout each of the cylinders, the magnitude was fairly low.

Development and evaluation of an intelligent traceability system for frozen tilapia fillet processing.

PubMed

Xiao, Xinqing; Fu, Zetian; Qi, Lin; Mira, Trebar; Zhang, Xiaoshuan

2015-10-01

The main export varieties in China are brand-name, high-quality bred aquatic products. Among them, tilapia has become the most important and fast-growing species since extensive consumer markets in North America and Europe have evolved as a result of commodity prices, year-round availability and quality of fresh and frozen products. As the largest tilapia farming country, China has over one-third of its tilapia production devoted to further processing and meeting foreign market demand. Using by tilapia fillet processing, this paper introduces the efforts for developing and evaluating ITS-TF: an intelligent traceability system integrated with statistical process control (SPC) and fault tree analysis (FTA). Observations, literature review and expert questionnaires were used for system requirement and knowledge acquisition; scenario simulation was applied to evaluate and validate ITS-TF performance. The results show that traceability requirement is evolved from a firefighting model to a proactive model for enhancing process management capacity for food safety; ITS-TF transforms itself as an intelligent system to provide functions on early warnings and process management by integrated SPC and FTA. The valuable suggestion that automatic data acquisition and communication technology should be integrated into ITS-TF was achieved for further system optimization, perfection and performance improvement. © 2014 Society of Chemical Industry.

Evaluating the Quality of Education at Dentistry School of Tehran University of Medical Sciences

PubMed Central

Farzianpour, Fereshteh; Monzavi, Abbas; Yassini, Esmaeil

2011-01-01

Background: Educational evaluation is a process which deals with data collection and assessment of academic activities’ progress. In this research, educational evaluation of Dentistry School of Tehran University of Medical Sciences, which trains students in undergraduate and residency courses, was studied. Methods: This descriptive study was done with a model of educational evaluation in ten steps and 13 fields including purposes and mission objectives, management and organization, academic board members, students, human resources and support, educational, research, health and treatment spaces, educational, diagnostic, research and laboratory tools, educational, research, health and treatment programs and courses, process of teaching and learning, evaluation and assessment, alumni, and patients satisfaction. Data were collected using observation, interviews, questionnaires, and checklists. Results: Results of the study were mainly qualitative and in some cases quantitative, based on defined optimal situation. The total mean of qualitative results of educational evaluation of dentistry school in all 13 fields was 55.98% which is relatively desirable. In the case of quantitative ones, results of some fields such as treatment quality of patients and education and learning of the students were relatively desirable (61.32% and 60.16% respectively). Conclusion: According to the results, educational goals and missions, educational and research facilities and spaces which were identified as the weakest areas need to be considered and paid more serious attention. PMID:22013466

Method of evaluating, expanding, and collapsing connectivity regions within dynamic systems

DOEpatents

Bailey, David A [Schenectady, NY

2004-11-16

An automated process defines and maintains connectivity regions within a dynamic network. The automated process requires an initial input of a network component around which a connectivity region will be defined. The process automatically and autonomously generates a region around the initial input, stores the region's definition, and monitors the network for a change. Upon detecting a change in the network, the effect is evaluated, and if necessary the regions are adjusted and redefined to accommodate the change. Only those regions of the network affected by the change will be updated. This process eliminates the need for an operator to manually evaluate connectivity regions within a network. Since the automated process maintains the network, the reliance on an operator is minimized; thus, reducing the potential for operator error. This combination of region maintenance and reduced operator reliance, results in a reduction of overall error.

Measuring Down: Evaluating Digital Storytelling as a Process for Narrative Health Promotion.

PubMed

Gubrium, Aline C; Fiddian-Green, Alice; Lowe, Sarah; DiFulvio, Gloria; Del Toro-Mejías, Lizbeth

2016-05-15

Digital storytelling (DST) engages participants in a group-based process to create and share narrative accounts of life events. We present key evaluation findings of a 2-year, mixed-methods study that focused on effects of participating in the DST process on young Puerto Rican Latina's self-esteem, social support, empowerment, and sexual attitudes and behaviors. Quantitative results did not show significant changes in the expected outcomes. However, in our qualitative findings we identified several ways in which the DST made positive, health-bearing effects. We argue for the importance of "measuring down" to reflect the locally grounded, felt experiences of participants who engage in the process, as current quantitative scales do not "measure up" to accurately capture these effects. We end by suggesting the need to develop mixed-methods, culturally relevant, and sensitive evaluation tools that prioritize process effects as they inform intervention and health promotion. © The Author(s) 2016.

Evaluation of Process Performance for Sustainable Hard Machining

NASA Astrophysics Data System (ADS)

Rotella, Giovanna; Umbrello, Domenico; , Oscar W. Dillon, Jr.; Jawahir, I. S.

This paper aims to evaluate the sustainability performance of machining operation of through-hardening steel, AISI 52100, taking into account the impact of the material removal process in its various aspects. Experiments were performed for dry and cryogenic cutting conditions using chamfered cubic boron nitride (CBN) tool inserts at varying cutting conditions (cutting speed and feed rate). Cutting forces, mechanical power, tool wear, white layer thickness, surface roughness and residual stresses were investigated in order to evaluate the effects of extreme in-process cooling on the machined surface. The results indicate that cryogenic cooling has the potential to be used for surface integrity enhancement for improved product life and more sustainable functional performance.

The critical role of NIR spectroscopy and statistical process control (SPC) strategy towards captopril tablets (25 mg) manufacturing process understanding: a case study.

PubMed

Curtivo, Cátia Panizzon Dal; Funghi, Nathália Bitencourt; Tavares, Guilherme Diniz; Barbosa, Sávio Fujita; Löbenberg, Raimar; Bou-Chacra, Nádia Araci

2015-05-01

In this work, near-infrared spectroscopy (NIRS) method was used to evaluate the uniformity of dosage units of three captopril 25 mg tablets commercial batches. The performance of the calibration method was assessed by determination of Q value (0.9986), standard error of estimation (C-set SEE = 1.956), standard error of prediction (V-set SEP = 2.076) as well as the consistency (106.1%). These results indicated the adequacy of the selected model. The method validation revealed the agreement of the reference high pressure liquid chromatography (HPLC) and NIRS methods. The process evaluation using the NIRS method showed that the variability was due to common causes and delivered predictable results consistently. Cp and Cpk values were, respectively, 2.05 and 1.80. These results revealed a non-centered process in relation to the average target (100% w/w), in the specified range (85-115%). The probability of failure was 21:100 million tablets of captopril. The NIRS in combination with the method of multivariate calibration, partial least squares (PLS) regression, allowed the development of methodology for the uniformity of dosage units evaluation of captopril tablets 25 mg. The statistical process control strategy associated with NIRS method as PAT played a critical role in understanding of the sources and degree of variation and its impact on the process. This approach led towards a better process understanding and provided the sound scientific basis for its continuous improvement.

Protocol for process evaluation of a randomised controlled trial of family-led rehabilitation post stroke (ATTEND) in India

PubMed Central

Liu, Hueiming; Lindley, Richard; Alim, Mohammed; Felix, Cynthia; Gandhi, Dorcas B C; Verma, Shweta J; Tugnawat, Deepak Kumar; Syrigapu, Anuradha; Ramamurthy, Ramaprabhu Krishnappa; Pandian, Jeyaraj D; Walker, Marion; Forster, Anne; Anderson, Craig S; Langhorne, Peter; Murthy, Gudlavalleti Venkata Satyanarayana; Shamanna, Bindiganavale Ramaswamy; Hackett, Maree L; Maulik, Pallab K; Harvey, Lisa A; Jan, Stephen

2016-01-01

Introduction We are undertaking a randomised controlled trial (fAmily led rehabiliTaTion aftEr stroke in INDia, ATTEND) evaluating training a family carer to enable maximal rehabilitation of patients with stroke-related disability; as a potentially affordable, culturally acceptable and effective intervention for use in India. A process evaluation is needed to understand how and why this complex intervention may be effective, and to capture important barriers and facilitators to its implementation. We describe the protocol for our process evaluation to encourage the development of in-process evaluation methodology and transparency in reporting. Methods and analysis The realist and RE-AIM (Reach, Effectiveness, Adoption, Implementation and Maintenance) frameworks informed the design. Mixed methods include semistructured interviews with health providers, patients and their carers, analysis of quantitative process data describing fidelity and dose of intervention, observations of trial set up and implementation, and the analysis of the cost data from the patients and their families perspective and programme budgets. These qualitative and quantitative data will be analysed iteratively prior to knowing the quantitative outcomes of the trial, and then triangulated with the results from the primary outcome evaluation. Ethics and dissemination The process evaluation has received ethical approval for all sites in India. In low-income and middle-income countries, the available human capital can form an approach to reducing the evidence practice gap, compared with the high cost alternatives available in established market economies. This process evaluation will provide insights into how such a programme can be implemented in practice and brought to scale. Through local stakeholder engagement and dissemination of findings globally we hope to build on patient-centred, cost-effective and sustainable models of stroke rehabilitation. Trial registration number CTRI/2013/04/003557. PMID:27633636

Process margin enhancement for 0.25-μm metal etch process

NASA Astrophysics Data System (ADS)

Lee, Chung Y.; Ma, Wei Wen; Lim, Eng H.; Cheng, Alex T.; Joy, Raymond; Ross, Matthew F.; Wong, Selmer S.; Marlowe, Trey

2000-06-01

This study evaluates electron beam stabilization of UV6, a positive tone Deep-UV (DUV) resist from Shipley, for a 0.25 micrometer metal etch application. Results are compared between untreated resist and resist treated with different levels of electron beam stabilization. The electron beam processing was carried out in an ElectronCureTM flood electron beam exposure system from Honeywell International Inc., Electron Vision. The ElectronCureTM system utilizes a flood electron beam source which is larger in diameter than the substrate being processed, and is capable of variable energy so that the electron range is matched to the resist film thickness. Changes in the UV6 resist material as a result of the electron beam stabilization are monitored via spectroscopic ellipsometry for film thickness and index of refraction changes and FTIR for analysis of chemical changes. Thermal flow stability is evaluated by applying hot plate bakes of 150 degrees Celsius and 200 degrees Celsius, to patterned resist wafers with no treatment and with an electron beam dose level of 2000 (mu) C/cm2. A significant improvement in the thermal flow stability of the patterned UV6 resist features is achieved with the electron beam stabilization process. Etch process performance of the UV6 resist was evaluated by performing a metal pattern transfer process on wafers with untreated resist and comparing these with etch results on wafers with different levels of electron beam stabilization. The etch processing was carried out in an Applied Materials reactor with an etch chemistry including BCl3 and Cl2. All wafers were etched under the same conditions and the resist was treated after etch to prevent further erosion after etch but before SEM analysis. Post metal etch SEM cross-sections show the enhancement in etch resistance provided by the electron beam stabilization process. Enhanced process margin is achieved as a result of the improved etch resistance, and is observed in reduced resist side-wall angles after etch. Only a slight improvement is observed in the isolated to dense bias effects of the etch process. Improved CD control is also achieved by applying the electron beam process, as more consistent CDs are observed after etch.

Cybernetics: a possible solution for the "knowledge gap" between "external" and "internal" in evaluation processes.

PubMed

Levin-Rozalis, Miri

2010-11-01

This paper addresses the issue of the knowledge gap between evaluators and the entity being evaluated: the dilemma of the knowledge of professional evaluators vs. the in-depth knowledge of the evaluated subjects. In order to optimize evaluative outcomes, the author suggests an approach based on ideas borrowed from the science of cybernetics as a method of evaluation--one that enables in-depth perception of the evaluated field without jeopardizing a rigorous study or the evaluator's professionalism. The paper focuses on the main concepts that deal with this dilemma--showing how cybernetics combines the different bodies of knowledge of the different stakeholders, including the professional evaluator, resulting in a coherent body of knowledge created mainly by those internal to the process, owned by them, and relevant to all--those who are internal and those who are external and their different purposes. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Quantitative Acoustic Model for Adhesion Evaluation of Pmma/silicon Film Structures

NASA Astrophysics Data System (ADS)

Ju, H. S.; Tittmann, B. R.

2010-02-01

A Poly-methyl-methacrylate (PMMA) film on a silicon substrate is a main structure for photolithography in semiconductor manufacturing processes. This paper presents a potential of scanning acoustic microscopy (SAM) for nondestructive evaluation of the PMMA/Si film structure, whose adhesion failure is commonly encountered during the fabrication and post-fabrication processes. A physical model employing a partial discontinuity in displacement is developed for rigorously quantitative evaluation of the interfacial weakness. The model is implanted to the matrix method for the surface acoustic wave (SAW) propagation in anisotropic media. Our results show that variations in the SAW velocity and reflectance are predicted to show their sensitivity to the adhesion condition. Experimental results by the v(z) technique and SAW velocity reconstruction verify the prediction.

Standards for Evaluation of Instructional Materials with Respect to Social Content.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento. Curriculum Framework and Instructional Materials Unit.

The purpose of this document is to provide reasonable, systematic standards for evaluation of instructional materials upon which evaluators may base their judgments, so that the results of the evaluation process will be as nearly consistent and therefore, as equitable, as possible. The guidelines are based on the social content requirements of the…

Introducing Evidence-Based Principles to Guide Collaborative Approaches to Evaluation: Results of an Empirical Process

ERIC Educational Resources Information Center

Shulha, Lyn M.; Whitmore, Elizabeth; Cousins, J. Bradley; Gilbert, Nathalie; al Hudib, Hind

2016-01-01

This article introduces a set of evidence-based principles to guide evaluation practice in contexts where evaluation knowledge is collaboratively produced by evaluators and stakeholders. The data from this study evolved in four phases: two pilot phases exploring the desirability of developing a set of principles; an online questionnaire survey…

Evaluating the Impact of Training: A Collection of Federal Agency Evaluation Practices.

ERIC Educational Resources Information Center

Salinger, Ruth; Bartlett, Joan

The purpose of this document is to share various approaches used by federal agencies to assess needs and measure training effectiveness. The emphasis in the descriptions is on the evaluation process rather than on the results. One program was evaluated by employing return-on-investment (ROI) data and using volunteer line personnel who conducted…

Beyond Resistance: Exploring Health Managers' Propensity for Participatory Evaluation in a Developing Country

ERIC Educational Resources Information Center

Smits, Pernelle A.; Champagne, Francois; Farand, Lambert

2012-01-01

The evaluation of interventions is becoming increasing common and now often seeks to involve managers in the process. Such practical participatory evaluation (PPE) aims to increase the use of evaluation results through the participation of stakeholders. This study focuses on the propensity of health managers for PPE, as measured through the…

Pure Dead Brilliant?: Evaluating the Glasgow Story Digitisation Project

ERIC Educational Resources Information Center

Anderson, Ian G.

2007-01-01

Purpose: The purpose of this paper is to present an evaluation of The Glasgow Story (TGS) digitisation project, funded by the UK's National Lottery's New Opportunities Fund digitisation (NOF-Digi) programme, and a critique of the evaluation process itself. The paper emphasises the need for user impact evaluation and for results to be brought into…

Residual stress evaluation of components produced via direct metal laser sintering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kemerling, Brandon; Lippold, John C.; Fancher, Christopher M.

Direct metal laser sintering is an additive manufacturing process which is capable of fabricating three-dimensional components using a laser energy source and metal powder particles. Despite the numerous benefits offered by this technology, the process maturity is low with respect to traditional subtractive manufacturing methods. Relationships between key processing parameters and final part properties are generally lacking and require further development. In this study, residual stresses were evaluated as a function of key process variables. The variables evaluated included laser scan strategy and build plate preheat temperature. Residual stresses were measured experimentally via neutron diffraction and computationally via finite elementmore » analysis. Good agreement was shown between the experimental and computational results. Results showed variations in the residual stress profile as a function of laser scan strategy. Compressive stresses were dominant along the build height (z) direction, and tensile stresses were dominant in the x and y directions. Build plate preheating was shown to be an effective method for alleviating residual stress due to the reduction in thermal gradient.« less

Residual stress evaluation of components produced via direct metal laser sintering

DOE PAGES

Kemerling, Brandon; Lippold, John C.; Fancher, Christopher M.; ...

2018-03-22

Direct metal laser sintering is an additive manufacturing process which is capable of fabricating three-dimensional components using a laser energy source and metal powder particles. Despite the numerous benefits offered by this technology, the process maturity is low with respect to traditional subtractive manufacturing methods. Relationships between key processing parameters and final part properties are generally lacking and require further development. In this study, residual stresses were evaluated as a function of key process variables. The variables evaluated included laser scan strategy and build plate preheat temperature. Residual stresses were measured experimentally via neutron diffraction and computationally via finite elementmore » analysis. Good agreement was shown between the experimental and computational results. Results showed variations in the residual stress profile as a function of laser scan strategy. Compressive stresses were dominant along the build height (z) direction, and tensile stresses were dominant in the x and y directions. Build plate preheating was shown to be an effective method for alleviating residual stress due to the reduction in thermal gradient.« less

Evaluation of ridesharing programs in Michigan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kulp, G.; Tsao, H.J.; Webber, R.E.

1982-10-01

The design, implementation, and results of a carpool and vanpool evaluation are described. Objectives of the evaluation were: to develop credible estimates of the energy savings attributable to the ridesharing program, to provide information for improving the performance of the ridesharing program, and to add to a general understanding of the ridesharing process. Previous evaluation work is critiqued and the research methodology adopted for this study is discussed. The ridesharing program in Michigan is described and the basis for selecting Michigan as the evaluation site is discussed. The evaluation methodology is presented, including research design, sampling procedure, data collection, andmore » data validation. Evaluation results are analyzed. (LEW)« less

The development and evaluation of an alternative powder prepregging technique for use with LaRC-TPI/graphite composites

NASA Technical Reports Server (NTRS)

Ogden, Andrea L.; Hyer, Michael W.; Wilkes, Garth L.; Loos, Alfred C.; St.clair, Terry L.

1991-01-01

An alternative powder prepregging method for use with LaRC-TPI (a thermoplastic polyimide)/graphite composites is investigated. The alternative method incorporates the idea of moistening the fiber prior to powder coating. Details of the processing parameters are given and discussed. The material was subsequently laminated into small coupons which were evaluated for processing defects using electron microscopy. After the initial evaluation of the material, no major processing defects were encountered but there appeared to be an interfacial adhesion problem. As a result, prepregging efforts were extended to include an additional fiber system, XAS, and a semicrystalline form of the matrix. The semicrystalline form of the matrix was the result of a complex heat treating cycle. Using scanning electron microscopy (SEM), the fiber/matrix adhesion was evaluated in these systems relative to the amorphous/XAS coupons. Based on these results, amorphous and semicrystalline/AS-4 and XAS materials were prepregged and laminated for transverse tensile testing. The results of these tests are presented, and in an effort to obtain more information on the effect of the matrix, remaining semicrystalline transverse tensile coupons were transformed back to the amorphous state and tested. The mechanical properties of the transformed coupons returned to the values observed for the original amorphous coupons, and the interfacial adhesion, as observed by SEM, was better than in any previous sample.

Mechanisms of masked evaluative priming: task sets modulate behavioral and electrophysiological priming for picture and words differentially

PubMed Central

Liegel, Nathalie; Zovko, Monika; Wentura, Dirk

2017-01-01

Abstract Research with the evaluative priming paradigm has shown that affective evaluation processes reliably influence cognition and behavior, even when triggered outside awareness. However, the precise mechanisms underlying such subliminal evaluative priming effects, response activation vs semantic processing, are matter of a debate. In this study, we determined the relative contribution of semantic processing and response activation to masked evaluative priming with pictures and words. To this end, we investigated the modulation of masked pictorial vs verbal priming by previously activated perceptual vs semantic task sets and assessed the electrophysiological correlates of priming using event-related potential (ERP) recordings. Behavioral and electrophysiological effects showed a differential modulation of pictorial and verbal subliminal priming by previously activated task sets: Pictorial priming was only observed during the perceptual but not during the semantic task set. Verbal priming, in contrast, was found when either task set was activated. Furthermore, only verbal priming was associated with a modulation of the N400 ERP component, an index of semantic processing, whereas a priming-related modulation of earlier ERPs, indexing visuo-motor S-R activation, was found for both picture and words. The results thus demonstrate that different neuro-cognitive processes contribute to unconscious evaluative priming depending on the stimulus format. PMID:27998994

Evaluating the Role of Attention in the Context of Unconscious Thought Theory: Differential Impact of Attentional Scope and Load on Preference and Memory

PubMed Central

Srinivasan, Narayanan; Mukherjee, Sumitava; Mishra, Maruti V.; Kesarwani, Smriti

2013-01-01

Attention is a key process used to conceptualize and define modes of thought, but we lack information about the role of specific attentional processes on preferential choice and memory in multi-attribute decision making. In this study, we examine the role of attention based on two dimensions, attentional scope and load on choice preference strength and memory using a paradigm that arguably elicits unconscious thought. Scope of attention was manipulated by using global or local processing during distraction (Experiment 1) and before the information-encoding stage (Experiment 2). Load was manipulated by using the n-back task in Experiment 1. Results from Experiment 1 show that global processing or distributed attention during distraction results in stronger preference irrespective of load but better memory only at low cognitive load. Task difficulty or load did not have any effect on preference or memory. In Experiment 2, distributed attention before attribute encoding facilitated only memory but did not influence preference. Results show that attentional processes at different stages of processing like distraction and information-encoding influence decision making processes. Scope of attention not only influences preference and memory but the manner in which attentional scope influences them depends on both load and stage of information processing. The results indicate the important role of attention in processes critical for decision making and calls for a re-evaluation of the unconscious thought theory (UTT) and the need for reconceptualizing the role of attention. PMID:23382726

Evaluating the role of attention in the context of unconscious thought theory: differential impact of attentional scope and load on preference and memory.

PubMed

Srinivasan, Narayanan; Mukherjee, Sumitava; Mishra, Maruti V; Kesarwani, Smriti

2013-01-01

Attention is a key process used to conceptualize and define modes of thought, but we lack information about the role of specific attentional processes on preferential choice and memory in multi-attribute decision making. In this study, we examine the role of attention based on two dimensions, attentional scope and load on choice preference strength and memory using a paradigm that arguably elicits unconscious thought. Scope of attention was manipulated by using global or local processing during distraction (Experiment 1) and before the information-encoding stage (Experiment 2). Load was manipulated by using the n-back task in Experiment 1. Results from Experiment 1 show that global processing or distributed attention during distraction results in stronger preference irrespective of load but better memory only at low cognitive load. Task difficulty or load did not have any effect on preference or memory. In Experiment 2, distributed attention before attribute encoding facilitated only memory but did not influence preference. Results show that attentional processes at different stages of processing like distraction and information-encoding influence decision making processes. Scope of attention not only influences preference and memory but the manner in which attentional scope influences them depends on both load and stage of information processing. The results indicate the important role of attention in processes critical for decision making and calls for a re-evaluation of the unconscious thought theory (UTT) and the need for reconceptualizing the role of attention.

Performance of ASML YieldStar μDBO overlay targets for advanced lithography nodes C028 and C014 overlay process control

NASA Astrophysics Data System (ADS)

Blancquaert, Yoann; Dezauzier, Christophe; Depre, Jerome; Miqyass, Mohamed; Beltman, Jan

2013-04-01

Continued tightening of overlay control budget in semiconductor lithography drives the need for improved metrology capabilities. Aggressive improvements are needed for overlay metrology speed, accuracy and precision. This paper is dealing with the on product metrology results of a scatterometry based platform showing excellent production results on resolution, precision, and tool matching for overlay. We will demonstrate point to point matching between tool generations as well as between target sizes and types. Nowadays, for the advanced process nodes a lot of information is needed (Higher order process correction, Reticle fingerprint, wafer edge effects) to quantify process overlay. For that purpose various overlay sampling schemes are evaluated: ultra- dense, dense and production type. We will show DBO results from multiple target type and shape for on product overlay control for current and future node down to at least 14 nm node. As overlay requirements drive metrology needs, we will evaluate if the new metrology platform meets the overlay requirements.

Scenes for Social Information Processing in Adolescence: Item and factor analytic procedures for psychometric appraisal.

PubMed

Vagos, Paula; Rijo, Daniel; Santos, Isabel M

2016-04-01

Relatively little is known about measures used to investigate the validity and applications of social information processing theory. The Scenes for Social Information Processing in Adolescence includes items built using a participatory approach to evaluate the attribution of intent, emotion intensity, response evaluation, and response decision steps of social information processing. We evaluated a sample of 802 Portuguese adolescents (61.5% female; mean age = 16.44 years old) using this instrument. Item analysis and exploratory and confirmatory factor analytic procedures were used for psychometric examination. Two measures for attribution of intent were produced, including hostile and neutral; along with 3 emotion measures, focused on negative emotional states; 8 response evaluation measures; and 4 response decision measures, including prosocial and impaired social behavior. All of these measures achieved good internal consistency values and fit indicators. Boys seemed to favor and choose overt and relational aggression behaviors more often; girls conveyed higher levels of neutral attribution, sadness, and assertiveness and passiveness. The Scenes for Social Information Processing in Adolescence achieved adequate psychometric results and seems a valuable alternative for evaluating social information processing, even if it is essential to continue investigation into its internal and external validity. (c) 2016 APA, all rights reserved.

The Role of Theory of Mind on Social Information Processing in Children With Autism Spectrum Disorders: A Mediation Analysis.

PubMed

Mazza, Monica; Mariano, Melania; Peretti, Sara; Masedu, Francesco; Pino, Maria Chiara; Valenti, Marco

2017-05-01

Individuals with autism spectrum disorders (ASD) show significant impairments in social skills and theory of mind (ToM). The aim of this study was to evaluate ToM and social information processing abilities in 52 children with ASD compared to 55 typically developing (TD) children. A mediation analysis evaluated whether social information processing abilities can be mediated by ToM competences. In our results, children with autism showed a deficit in social skills and ToM components. The innovative results of our study applying mediation analysis demonstrate that ToM plays a key role in the development of social abilities, and the lack of ToM competences in children with autism impairs their competent social behavior.

Temporal prediction restores the evaluative processing of delayed action feedback: an electrophysiological study.

PubMed

Kimura, Kenta; Kimura, Motohiro

2016-09-28

The evaluative processing of the valence of action feedback is reflected by an event-related brain potential component called feedback-related negativity (FRN) or reward positivity (RewP). Recent studies have shown that FRN/RewP is markedly reduced when the action-feedback interval is long (e.g. 6000 ms), indicating that an increase in the action-feedback interval can undermine the evaluative processing of the valence of action feedback. The aim of the present study was to investigate whether or not such undermined evaluative processing of delayed action feedback could be restored by improving the accuracy of the prediction in terms of the timing of action feedback. With a typical gambling task in which the participant chose one of two cards and received an action feedback indicating monetary gain or loss, the present study showed that FRN/RewP was significantly elicited even when the action-feedback interval was 6000 ms, when an auditory stimulus sequence was additionally presented during the action-feedback interval as a temporal cue. This result suggests that the undermined evaluative processing of delayed action feedback can be restored by increasing the accuracy of the prediction on the timing of the action feedback.

Out-Life Characteristics of IM7/977-3 Composites

NASA Technical Reports Server (NTRS)

Miller, Sandi G.; Sutter, James K.; Hou, Tan-Hung; Scheiman, Daniel A.; Martin, Richard E.; Maryanski, Michael; Schlea, Michelle; Gardner, John M.; Schiferl, Zack R.

2010-01-01

The capability to manufacture large structures leads to weight savings and reduced risk relative to joining smaller components. However, manufacture of increasingly large composite components is pushing the out-time limits of epoxy/ carbon fiber prepreg. IM7/977-3 is an autoclave processable prepreg material, commonly used in aerospace structures. The out-time limit is reported as 30 days by the manufacturer. The purpose of this work was to evaluate the material processability and composite properties of 977-3 resin and IM7/977-3 prepreg that had been aged at room temperature for up to 60 days. The effects of room temperature aging on the thermal and visco-elastic properties of the materials were investigated. Neat resin was evaluated by differential scanning calorimetry to characterize thermal properties and change in activation energy of cure. Neat resin was also evaluated by rheometry to characterize its processability in composite fabrication. IM7/977-3 prepreg was evaluated by dynamic mechanical analysis to characterize the curing behavior. Prepreg tack was also evaluated over 60 days. The overall test results suggested that IM7/977-3 was a robust material that offered quality laminates throughout this aging process when processed by autoclave.

Wastewater treatment of chemical laboratory using electro assisted-phytoremediation (EAPR)

NASA Astrophysics Data System (ADS)

Putra, Rudy Syah; Trahadinata, Gilang Ahmad; Latif, Arif; Solehudin, Mochamad

2017-03-01

The EAPR process using water hyacinth (Eichornia crassipes) on the wastewater treatment of chemical laboratory had been evaluated. The purpose of the EAPR process was to decrease the BOD, COD and heavy metal concentration in the wastewater. The effectiveness of the process on the wastewater treatment was evaluated using COD, BOD, and heavy metal (Pb, Cu) concentration, respectively. The result showed that the EAPR process decrease the COD, BOD, Pb and Cu in the 4 h of EAPR process. Those concentrations were met the water quality standard of class IV according to government regulation No. 82/2001 regarding the water quality management and water pollution control of the Republic of Indonesia.

Test results for SEU and SEL immune memory circuits

NASA Technical Reports Server (NTRS)

Wiseman, D.; Canaris, J.; Whitaker, S.; Gambles, J.; Arave, K.; Arave, L.

1993-01-01

Test results for three SEU logic/circuit hardened CMOS memory circuits verify upset and latch-up immunity for two configurations to be in excess of 120 MeV cm(exp 2)/mg using a commercial, non-radiation hardened CMOS process. Test chips from three separate fabrication runs in two different process were evaluated.

The Teaching Evaluation Process: Segmentation of Marketing Students.

ERIC Educational Resources Information Center

Yau, Oliver H. M.; Kwan, Wayne

1993-01-01

A study applied the concept of market segmentation to student evaluation of college teaching, by assessing whether there exist several segments of students and how this relates to their evaluation of faculty. Subjects were 156 Australian undergraduate business administration students. Results suggest segments do exist, with different expectations…

Integrated Emergy and Economic Evaluation of Tea Production Chains in Anxi, China

EPA Science Inventory

Emergy and economic methods were used to evaluate and compare tea production systems in Anxi, China. Tea production was classified into three phases, i.e., the nursery, the plantation and tea processing, and each phase was evaluated. The results showed that the nursery subsystems...

Let's Talk about Race: Evaluating a College Interracial Discussion Group on Race

ERIC Educational Resources Information Center

Ashby, Kimberly M.; Collins, Dana L.; Helms, Janet E.; Manlove, Joshua

2018-01-01

The authors evaluate Dialogues on Race, an interracial group intervention in which undergraduate student facilitators led conversations about race with their peers. The evaluation process is described, including developing collaborative relationships, identifying program goals, selecting measures, and analyzing and presenting results. The authors…

The Viewpoints of Students and Evaluation Experts About Performance Processes of Faculty Member Evaluation at Mazandaran University of Medical Sciences, 2014

PubMed Central

Ghahrani, Nassim; Balaghafari, Azita; Aligolbandi, Kobra; Vahedi, Mohammad; Siamian, Hasan

2015-01-01

Background and purpose: One of the most common ways used in most of the countries and Iran to determine the status of teacher training is the evaluation by students. The most common method of evaluation is the survey questionnaire, the content of a number of questions about educational activities provided to the students. The researchers plan to evaluate the students’ and experts’ performances at Mazandaran University of Medical Sciences on the process of evaluating the performance of teachers, they examined in 2014. Materials and methods: This study surveys the students and experts in the evaluation of faculty members’ performance process. The study subjects were 3904 students and 37 evaluation expert of Mazandaran University of Medical Sciences. Using Cochran sampling formula of 350 students through proportional stratified random sampling were selected. The experts’ viewpoint, method was used. Data collection tools consisted of 14 questions with answers Yes, or, I don’t know. Descriptive Statistical analysis of the data and chi-square test was performed. Results: From total of 350 students, 346 and the entire 37 evaluations expert participated in this study. Most of the students, 80 (23.12%) and the largest number of experts, 8 (21.62%) were from Sari Allied Medical Sciences Faculty. Most of the demographic information about gender were, 255 female students (74.56%) and 29 female experts (78.37%). In most age groups of students, 188 (55.62 percent) were in the category of 18 to 20 years, and the experts, 19 (51.35%) were in the category of 22 and 31 years. Most students, 232 of them (70.95%) were in semester 2 and 4. Most experts, 20 (54.05 percent) were under 10 years of work experience. The comparison between the views of students and experts in the evaluation process between the schools of Mazandaran University of Medical Sciences, Sari School of Nursing and Midwifery, there was difference between the opinions of experts and students (p-value=0.01. It showed 86.7% student and 33.3% of experts is satisfied with the evaluation process. Conclusion: on comparison of students and experts viewpoints on the implementation of the evaluation process, it is noteworthy that among students of different opinions on how the evaluation process. It worth to mention that there is insignificant difference between their viewpoints and majority of students and evaluation experts with the evaluation the process. In addition, the experts evaluated at different schools, most of them are satisfied the process. PMID:26236169

"Rate My Therapist": Automated Detection of Empathy in Drug and Alcohol Counseling via Speech and Language Processing

PubMed Central

Xiao, Bo; Imel, Zac E.; Georgiou, Panayiotis G.; Atkins, David C.; Narayanan, Shrikanth S.

2015-01-01

The technology for evaluating patient-provider interactions in psychotherapy–observational coding–has not changed in 70 years. It is labor-intensive, error prone, and expensive, limiting its use in evaluating psychotherapy in the real world. Engineering solutions from speech and language processing provide new methods for the automatic evaluation of provider ratings from session recordings. The primary data are 200 Motivational Interviewing (MI) sessions from a study on MI training methods with observer ratings of counselor empathy. Automatic Speech Recognition (ASR) was used to transcribe sessions, and the resulting words were used in a text-based predictive model of empathy. Two supporting datasets trained the speech processing tasks including ASR (1200 transcripts from heterogeneous psychotherapy sessions and 153 transcripts and session recordings from 5 MI clinical trials). The accuracy of computationally-derived empathy ratings were evaluated against human ratings for each provider. Computationally-derived empathy scores and classifications (high vs. low) were highly accurate against human-based codes and classifications, with a correlation of 0.65 and F-score (a weighted average of sensitivity and specificity) of 0.86, respectively. Empathy prediction using human transcription as input (as opposed to ASR) resulted in a slight increase in prediction accuracies, suggesting that the fully automatic system with ASR is relatively robust. Using speech and language processing methods, it is possible to generate accurate predictions of provider performance in psychotherapy from audio recordings alone. This technology can support large-scale evaluation of psychotherapy for dissemination and process studies. PMID:26630392

Evaluation of anomalies observed on film from S-190A flight system calibration test

NASA Technical Reports Server (NTRS)

Bourque, P. F.; Perry, L.; Sauer, G. E.

1975-01-01

Due to a persistent problem of scratched film from testing of the Skylab S-190A system, a series of tests were designed to identify the cause of the film scratching. The procedures followed in this test for pretest handling and packaging of the film, the makeup of the rolls for processing, and the results of the processed film evaluation are reported.

Psychiatric service staff perceptions of implementing a shared decision-making tool: a process evaluation study

PubMed Central

Schön, Ulla-Karin; Grim, Katarina; Wallin, Lars; Rosenberg, David; Svedberg, Petra

2018-01-01

ABSTRACT Purpose: Shared decision making, SDM, in psychiatric services, supports users to experience a greater sense of involvement in treatment, self-efficacy, autonomy and reduced coercion. Decision tools adapted to the needs of users have the potential to support SDM and restructure how users and staff work together to arrive at shared decisions. The aim of this study was to describe and analyse the implementation process of an SDM intervention for users of psychiatric services in Sweden. Method: The implementation was studied through a process evaluation utilizing both quantitative and qualitative methods. In designing the process evaluation for the intervention, three evaluation components were emphasized: contextual factors, implementation issues and mechanisms of impact. Results: The study addresses critical implementation issues related to decision-making authority, the perceived decision-making ability of users and the readiness of the service to increase influence and participation. It also emphasizes the importance of facilitation, as well as suggesting contextual adaptations that may be relevant for the local organizations. Conclusion: The results indicate that staff perceived the decision support tool as user-friendly and useful in supporting participation in decision-making, and suggest that such concrete supports to participation can be a factor in implementation if adequate attention is paid to organizational contexts and structures. PMID:29405889

Psychenet.de: Development and process evaluation of an e-mental health portal.

PubMed

Dirmaier, Jörg; Liebherz, Sarah; Sänger, Sylvia; Härter, Martin; Tlach, Lisa

2016-01-01

E-mental health interventions can have a positive impact on patient-reported and clinical outcomes. The purpose of this project was to develop a user-centered e-mental health portal. The development of the portal www.psychenet.de included mixed-methods techniques for needs assessment to identify user-relevant content. Furthermore, user-centered design techniques were applied by utilizing individual usability testing with cognitive task analysis. First, a basic version of the portal was created and introduced to the public by means of a media campaign. After the development of module-specific content, exposure and use of the portal was investigated as part of a process evaluation. Relevant content identified by needs assessment covered both, overarching and diagnosis-specific topics. Results of the process evaluation showed a highly accessed website. During the first 18 months, 119,423 visits were tracked. The portal was predominantly accessed by Google searches (73.9%), while 17.6% of visits were related to direct traffic. Serving as a complement to face-to-face consultations, www.psychenet.de attempts to inform about mental disorders, and engage patients in the course of their treatment. Results of the process evaluation confirm the high relevance and potential of the portal and can be used for further improvements and extensions in the future.

Electron Beam-Cure Polymer Matrix Composites: Processing and Properties

NASA Technical Reports Server (NTRS)

Wrenn, G.; Frame, B.; Jensen, B.; Nettles, A.

2001-01-01

Researchers from NASA and Oak Ridge National Laboratory are evaluating a series of electron beam curable composites for application in reusable launch vehicle airframe and propulsion systems. Objectives are to develop electron beam curable composites that are useful at cryogenic to elevated temperatures (-217 C to 200 C), validate key mechanical properties of these composites, and demonstrate cost-saving fabrication methods at the subcomponent level. Electron beam curing of polymer matrix composites is an enabling capability for production of aerospace structures in a non-autoclave process. Payoffs of this technology will be fabrication of composite structures at room temperature, reduced tooling cost and cure time, and improvements in component durability. This presentation covers the results of material property evaluations for electron beam-cured composites made with either unidirectional tape or woven fabric architectures. Resin systems have been evaluated for performance in ambient, cryogenic, and elevated temperature conditions. Results for electron beam composites and similar composites cured in conventional processes are reviewed for comparison. Fabrication demonstrations were also performed for electron beam-cured composite airframe and propulsion piping subcomponents. These parts have been built to validate manufacturing methods with electron beam composite materials, to evaluate electron beam curing processing parameters, and to demonstrate lightweight, low-cost tooling options.

Workflow for Criticality Assessment Applied in Biopharmaceutical Process Validation Stage 1.

PubMed

Zahel, Thomas; Marschall, Lukas; Abad, Sandra; Vasilieva, Elena; Maurer, Daniel; Mueller, Eric M; Murphy, Patrick; Natschläger, Thomas; Brocard, Cécile; Reinisch, Daniela; Sagmeister, Patrick; Herwig, Christoph

2017-10-12

Identification of critical process parameters that impact product quality is a central task during regulatory requested process validation. Commonly, this is done via design of experiments and identification of parameters significantly impacting product quality (rejection of the null hypothesis that the effect equals 0). However, parameters which show a large uncertainty and might result in an undesirable product quality limit critical to the product, may be missed. This might occur during the evaluation of experiments since residual/un-modelled variance in the experiments is larger than expected a priori. Estimation of such a risk is the task of the presented novel retrospective power analysis permutation test. This is evaluated using a data set for two unit operations established during characterization of a biopharmaceutical process in industry. The results show that, for one unit operation, the observed variance in the experiments is much larger than expected a priori, resulting in low power levels for all non-significant parameters. Moreover, we present a workflow of how to mitigate the risk associated with overlooked parameter effects. This enables a statistically sound identification of critical process parameters. The developed workflow will substantially support industry in delivering constant product quality, reduce process variance and increase patient safety.

Evaluation of Ohio work zone speed zones process.

DOT National Transportation Integrated Search

2014-06-01

This report describes the methodology and results of analyses performed to determine the effectiveness of Ohio Department of Transportation processes for establishing work zone speed zones. Researchers observed motorists speed choice upstream of a...

Bubble structure evaluation method of sponge cake by using image morphology

NASA Astrophysics Data System (ADS)

Kato, Kunihito; Yamamoto, Kazuhiko; Nonaka, Masahiko; Katsuta, Yukiyo; Kasamatsu, Chinatsu

2007-01-01

Nowadays, many evaluation methods for food industry by using image processing are proposed. These methods are becoming new evaluation method besides the sensory test and the solid-state measurement that have been used for the quality evaluation recently. The goal of our research is structure evaluation of sponge cake by using the image processing. In this paper, we propose a feature extraction method of the bobble structure in the sponge cake. Analysis of the bubble structure is one of the important properties to understand characteristics of the cake from the image. In order to take the cake image, first we cut cakes and measured that's surface by using the CIS scanner, because the depth of field of this type scanner is very shallow. Therefore the bubble region of the surface has low gray scale value, and it has a feature that is blur. We extracted bubble regions from the surface images based on these features. The input image is binarized, and the feature of bubble is extracted by the morphology analysis. In order to evaluate the result of feature extraction, we compared correlation with "Size of the bubble" of the sensory test result. From a result, the bubble extraction by using morphology analysis gives good correlation. It is shown that our method is as well as the subjectivity evaluation.

Application of micronucleus test and comet assay to evaluate BTEX biodegradation.

PubMed

Mazzeo, Dânia Elisa Christofoletti; Matsumoto, Silvia Tamie; Levy, Carlos Emílio; de Angelis, Dejanira de Franceschi; Marin-Morales, Maria Aparecida

2013-01-01

The BTEX (benzene, toluene, ethylbenzene and xylene) mixture is an environmental pollutant that has a high potential to contaminate water resources, especially groundwater. The bioremediation process by microorganisms has often been used as a tool for removing BTEX from contaminated sites. The application of biological assays is useful in evaluating the efficiency of bioremediation processes, besides identifying the toxicity of the original contaminants. It also allows identifying the effects of possible metabolites formed during the biodegradation process on test organisms. In this study, we evaluated the genotoxic and mutagenic potential of five different BTEX concentrations in rat hepatoma tissue culture (HTC) cells, using comet and micronucleus assays, before and after biodegradation. A mutagenic effect was observed for the highest concentration tested and for its respective non-biodegraded concentration. Genotoxicity was significant for all non-biodegraded concentrations and not significant for the biodegraded ones. According to our results, we can state that BTEX is mutagenic at concentrations close to its water solubility, and genotoxic even at lower concentrations, differing from some described results reported for the mixture components, when tested individually. Our results suggest a synergistic effect for the mixture and that the biodegradation process is a safe and efficient methodology to be applied at BTEX-contaminated sites. Copyright © 2012 Elsevier Ltd. All rights reserved.

[Evaluation of the prenatal nutritional care process in seven family health units in the city of Rio de Janeiro].

PubMed

Niquini, Roberta Pereira; Bittencourt, Sonia Azevedo; Lacerda, Elisa Maria de Aquino; Saunders, Cláudia; Leal, Maria do Carmo

2012-10-01

Nutritional care is of great importance in the prenatal period and the family health teams play a significant role in expanding the coverage of prenatal care. In this manner, the scope of this study was to evaluate the prenatal nutritional care process in seven family health units in the city of Rio de Janeiro. In 2008, a cross-sectional study was conducted and 230 pregnant women were interviewed and copies of their prenatal cards were obtained. The compliance of the process with the pre-established norms and criteria of the Ministry of Health was evaluated. Measurement and recording of blood pressure and weight and prescription of supplements and blood tests on the prenatal card are established steps in routine prenatal care. However, the results indicated that there was under-recording of stature, initial weight, edema, BMI by gestational age and laboratory tests results on the prenatal card. A lack of specific instruction on adequate use of the iron supplement, food consumption and weight gain was observed. The results indicated a pressing need for prenatal nutritional care and revealed deficiencies in this process, stressing the importance of minimum training for the health teams and the implementation of Family Health Support Centers.

A Comparison of Participant and Practitioner Beliefs About Evaluation

PubMed Central

Whitehall, Anna K.; Hill, Laura G.; Koehler, Christian R.

2014-01-01

The move to build capacity for internal evaluation is a common organizational theme in social service delivery, and in many settings, the evaluator is also the practitioner who delivers the service. The goal of the present study was to extend our limited knowledge of practitioner evaluation. Specifically, the authors examined practitioner concerns about administering pretest and posttest evaluations within the context of a multisite 7-week family strengthening program and compared those concerns with self-reported attitudes of the parents who completed evaluations. The authors found that program participants (n = 105) were significantly less likely to find the evaluation process intrusive, and more likely to hold positive beliefs about the evaluation process, than practitioners (n = 140) expected. Results of the study may address a potential barrier to effective practitioner evaluation—the belief that having to administer evaluations interferes with establishing a good relationship with program participants. PMID:25328379

Conversion of bioprocess ethanol to industrial chemical products - Applications of process models for energy-economic assessments

NASA Technical Reports Server (NTRS)

Rohatgi, Naresh K.; Ingham, John D.

1992-01-01

An assessment approach for accurate evaluation of bioprocesses for large-scale production of industrial chemicals is presented. Detailed energy-economic assessments of a potential esterification process were performed, where ethanol vapor in the presence of water from a bioreactor is catalytically converted to ethyl acetate. Results show that such processes are likely to become more competitive as the cost of substrates decreases relative to petrolium costs. A commercial ASPEN process simulation provided a reasonably consistent comparison with energy economics calculated using JPL developed software. Detailed evaluations of the sensitivity of production cost to material costs and annual production rates are discussed.

Spectral OCT with speckle contrast reduction for evaluation of the healing process after PRK and transepithelial PRK.

PubMed

Kaluzny, Bartlomiej J; Szkulmowski, Maciej; Bukowska, Danuta M; Wojtkowski, Maciej

2014-04-01

We evaluate Spectral OCT (SOCT) with a speckle contrast reduction technique using resonant scanner for assessment of corneal surface changes after excimer laser photorefractive keratectomy (PRK) and we compare healing process between conventional PRK and transepithelial PRK. The measurements were performed before and after the surgery. Obtained results show that SOCT with a resonant scanner speckle contrast reduction is capable of providing information regarding the healing process after PRK. The main difference between the healing processes of PRK and TransPRK, assessed by SOCT, was the time to cover the stroma with epithelium, which was shorter in the TransPRK group.

STATISTICAL ANALYSIS OF SNAP 10A THERMOELECTRIC CONVERTER ELEMENT PROCESS DEVELOPMENT VARIABLES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fitch, S.H.; Morris, J.W.

1962-12-15

Statistical analysis, primarily analysis of variance, was applied to evaluate several factors involved in the development of suitable fabrication and processing techniques for the production of lead telluride thermoelectric elements for the SNAP 10A energy conversion system. The analysis methods are described as to their application for determining the effects of various processing steps, estabIishing the value of individual operations, and evaluating the significance of test results. The elimination of unnecessary or detrimental processing steps was accomplished and the number of required tests was substantially reduced by application of these statistical methods to the SNAP 10A production development effort. (auth)

Evaluation of new data processing algorithms for planar gated ventriculography (MUGA)

PubMed Central

Fair, Joanna R.; Telepak, Robert J.

2009-01-01

Before implementing one of two new LVEF radionuclide gated ventriculogram (MUGA) systems, the results from 312 consecutive parallel patient studies were evaluated. Each gamma‐camera acquisition was simultaneously processed by semi‐automatic Medasys Pinnacle and by fully automatic and semiautomatic Philips nuclear medicine computer systems. The Philips systems yielded LVEF results within ±5LVEF percentage points of the Medasys system in fewer than half of the studies. The remaining values were higher or lower than those from the long‐used Medasys system. These differences might have changed cancer patient chemotherapy clinical decisions. As a result, our institution elected not to implement either new system. PACS: 87.57.U‐ Nuclear medicine imaging

Application of a responsive evaluation approach in medical education.

PubMed

Curran, Vernon; Christopher, Jeanette; Lemire, Francine; Collins, Alice; Barrett, Brendan

2003-03-01

This paper reports on the usefulness of a responsive evaluation model in evaluating the clinical skills assessment and training (CSAT) programme at the Faculty of Medicine, Memorial University of Newfoundland, Canada. The purpose of this paper is to introduce the responsive evaluation approach, ascertain its utility, feasibility, propriety and accuracy in a medical education context, and discuss its applicability as a model for medical education programme evaluation. Robert Stake's original 12-step responsive evaluation model was modified and reduced to five steps, including: (1) stakeholder audience identification, consultation and issues exploration; (2) stakeholder concerns and issues analysis; (3) identification of evaluative standards and criteria; (4) design and implementation of evaluation methodology; and (5) data analysis and reporting. This modified responsive evaluation process was applied to the CSAT programme and a meta-evaluation was conducted to evaluate the effectiveness of the approach. The responsive evaluation approach was useful in identifying the concerns and issues of programme stakeholders, solidifying the standards and criteria for measuring the success of the CSAT programme, and gathering rich and descriptive evaluative information about educational processes. The evaluation was perceived to be human resource dependent in nature, yet was deemed to have been practical, efficient and effective in uncovering meaningful and useful information for stakeholder decision-making. Responsive evaluation is derived from the naturalistic paradigm and concentrates on examining the educational process rather than predefined outcomes of the process. Responsive evaluation results are perceived as having more relevance to stakeholder concerns and issues, and therefore more likely to be acted upon. Conducting an evaluation that is responsive to the needs of these groups will ensure that evaluative information is meaningful and more likely to be used for programme enhancement and improvement.

Electricity from sunlight. [low cost silicon for solar cells

NASA Technical Reports Server (NTRS)

Yaws, C. L.; Miller, J. W.; Lutwack, R.; Hsu, G.

1978-01-01

The paper discusses a number of new unconventional processes proposed for the low-cost production of silicon for solar cells. Consideration is given to: (1) the Battelle process (Zn/SiCl4), (2) the Battelle process (SiI4), (3) the Silane process, (4) the Motorola process (SiF4/SiF2), (5) the Westinghouse process (Na/SiCl4), (6) the Dow Corning process (C/SiO2), (7) the AeroChem process (SiCl4/H atom), and the Stanford process (Na/SiF4). Preliminary results indicate that the conventional process and the SiI4 processes cannot meet the project goal of $10/kg by 1986. Preliminary cost evaluation results for the Zn/SiCl4 process are favorable.

Establishment of an unrelated umbilical cord blood bank qualification program: ensuring quality while meeting Food and Drug Administration vendor qualification requirements.

PubMed

Rabe, Fran; Kadidlo, Diane; Van Orsow, Lisa; McKenna, David

2013-10-01

Qualification of a cord blood bank (CBB) is a complex process that includes evaluation of multiple aspects of donor screening and testing, processing, accreditation and approval by professional cell therapy groups, and results of received cord blood units. The University of Minnesota Medical Center Cell Therapy Laboratory has established a CBB vendor qualification process to ensure the CBB meets established regulatory and quality requirements. The deployed qualification of CBBs is based on retrospective and prospective review of the CBB. Forty-one CBBs were evaluated retrospectively: seven CBBs were disqualified based on failed quality control (QC) results. Eight CBBs did not meet the criteria for retrospective qualification because fewer than 3 cord blood units were received and the CBB was not accredited. As of March 2012, three US and one non-US CBBs have been qualified prospectively. One CBB withdrew from the qualification process after successful completion of the comprehensive survey and subsequent failure of the provided QC unit to pass the minimum criteria. One CBB failed the prospective qualification process based on processing methods that were revealed during the paper portion of the evaluation. A CBB qualification process is necessary for a transplant center to manage the qualification of the large number of CBBs needed to support a umbilical cord blood transplantation program. A transplant center that has utilized cord blood for a number of years before implementation of a qualification process should use a retrospective qualification process along with a prospective process. © 2013 American Association of Blood Banks.

Semi-Markov adjunction to the Computer-Aided Markov Evaluator (CAME)

NASA Technical Reports Server (NTRS)

Rosch, Gene; Hutchins, Monica A.; Leong, Frank J.; Babcock, Philip S., IV

1988-01-01

The rule-based Computer-Aided Markov Evaluator (CAME) program was expanded in its ability to incorporate the effect of fault-handling processes into the construction of a reliability model. The fault-handling processes are modeled as semi-Markov events and CAME constructs and appropriate semi-Markov model. To solve the model, the program outputs it in a form which can be directly solved with the Semi-Markov Unreliability Range Evaluator (SURE) program. As a means of evaluating the alterations made to the CAME program, the program is used to model the reliability of portions of the Integrated Airframe/Propulsion Control System Architecture (IAPSA 2) reference configuration. The reliability predictions are compared with a previous analysis. The results bear out the feasibility of utilizing CAME to generate appropriate semi-Markov models to model fault-handling processes.

Evaluation results for intelligent transportation systems

DOT National Transportation Integrated Search

2000-11-09

This presentation covers the methods of evaluation set out for EC-funded ITS research and demonstration projects, known as the CONVERGE validation quality process and the lessons learned from that approach. The new approach to appraisal, which is bei...

New Decision Tool To Evaluate Award Selection Process.

ERIC Educational Resources Information Center

Thornley, Richard; Spence, Matthew W.; Taylor, Mark; Magnan, Jacques

2002-01-01

Describes an Alberta Heritage Foundation for Medical Research initiative to enhance the review process for its training awards using a new tool based on the ProGrid decision-assist software. Implementation resulted in several modifications to the review process in the areas of definition, rationality, fairness, timeliness, and responsiveness; the…

76 FR 41297 - Grant Program To Build Tribal Energy Development Capacity

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-13

... develop energy resources on Indian land and properly accounting for resulting energy resource production and revenues. We will use a competitive evaluation process based on criteria stated in the.... Determine what process(es) and/or procedure(s) may be used to eliminate capacity gaps or sustain the...

Research on assessment and improvement method of remote sensing image reconstruction

NASA Astrophysics Data System (ADS)

Sun, Li; Hua, Nian; Yu, Yanbo; Zhao, Zhanping

2018-01-01

Remote sensing image quality assessment and improvement is an important part of image processing. Generally, the use of compressive sampling theory in remote sensing imaging system can compress images while sampling which can improve efficiency. A method of two-dimensional principal component analysis (2DPCA) is proposed to reconstruct the remote sensing image to improve the quality of the compressed image in this paper, which contain the useful information of image and can restrain the noise. Then, remote sensing image quality influence factors are analyzed, and the evaluation parameters for quantitative evaluation are introduced. On this basis, the quality of the reconstructed images is evaluated and the different factors influence on the reconstruction is analyzed, providing meaningful referential data for enhancing the quality of remote sensing images. The experiment results show that evaluation results fit human visual feature, and the method proposed have good application value in the field of remote sensing image processing.

Evaluative-feedback stimuli selectively activate the self-related brain area: an fMRI study.

PubMed

Pan, Xiaohong; Hu, Yang; Li, Lei; Li, Jianqi

2009-11-06

Evaluative-feedback, occurring in our daily life, generally contains subjective appraisal of one's specific abilities and personality characteristics besides objective right-or-wrong information. Traditional psychological researches have proved it to be important in building up one's self-concept; however, the neural basis underlying its cognitive processing remains unclear. The present neuroimaging study revealed the mechanism of evaluative-feedback processing at the neural level. 19 healthy Chinese subjects participated in this experiment, and completed the time-estimation task to better their performance according to four types of feedback, namely positive evaluative- and performance-feedback as well as negative evaluative- and performance-feedback. Neuroimaging findings showed that evaluative- rather than performance-feedback can induce increased activities mainly distributed in the cortical midline structures (CMS), including medial prefrontal cortex (BA 8/9)/anterior cigulate cortex (ACC, BA 20), precuneus (BA 7/31) adjacent to posterior cingulate gyrus (PCC, BA 23) of both hemispheres, as well as right inferior lobule (BA 40). This phenomenon can provide evidence that evaluative-feedback may significantly elicit the self-related processing in our brain. In addition, our results also revealed that more brain areas, particularly some self-related neural substrates were activated by the positive evaluative-feedback, in comparative with the negative one. In sum, this study suggested that evaluative-feedback was closely correlated with the self-concept processing, which distinguished it from the performance-feedback.

Evaluation of a Noise Reduction Procedure for Chest Radiography

PubMed Central

Fukui, Ryohei; Ishii, Rie; Kodani, Kazuhiko; Kanasaki, Yoshiko; Suyama, Hisashi; Watanabe, Masanari; Nakamoto, Masaki; Fukuoka, Yasushi

2013-01-01

Background The aim of this study was to evaluate the usefulness of noise reduction procedure (NRP), a function in the new image processing for chest radiography. Methods A CXDI-50G Portable Digital Radiography System (Canon) was used for X-ray detection. Image noise was analyzed with a noise power spectrum (NPS) and a burger phantom was used for evaluation of density resolution. The usefulness of NRP was evaluated by chest phantom images and clinical chest radiography. We employed the Bureau of Radiological Health Method for scoring chest images while carrying out our observations. Results NPS through the use of NRP was improved compared with conventional image processing (CIP). The results in image quality showed high-density resolution through the use of NRP, so that chest radiography examination can be performed with a low dose of radiation. Scores were significantly higher than for CIP. Conclusion In this study, use of NRP led to a high evaluation in these so we are able to confirm the usefulness of NRP for clinical chest radiography. PMID:24574577

Developing image processing meta-algorithms with data mining of multiple metrics.

PubMed

Leung, Kelvin; Cunha, Alexandre; Toga, A W; Parker, D Stott

2014-01-01

People often use multiple metrics in image processing, but here we take a novel approach of mining the values of batteries of metrics on image processing results. We present a case for extending image processing methods to incorporate automated mining of multiple image metric values. Here by a metric we mean any image similarity or distance measure, and in this paper we consider intensity-based and statistical image measures and focus on registration as an image processing problem. We show how it is possible to develop meta-algorithms that evaluate different image processing results with a number of different metrics and mine the results in an automated fashion so as to select the best results. We show that the mining of multiple metrics offers a variety of potential benefits for many image processing problems, including improved robustness and validation.

Evaluation of the quality of the teaching-learning process in undergraduate courses in Nursing.

PubMed

González-Chordá, Víctor Manuel; Maciá-Soler, María Loreto

2015-01-01

to identify aspects of improvement of the quality of the teaching-learning process through the analysis of tools that evaluated the acquisition of skills by undergraduate students of Nursing. prospective longitudinal study conducted in a population of 60 secondyear Nursing students based on registration data, from which quality indicators that evaluate the acquisition of skills were obtained, with descriptive and inferential analysis. nine items were identified and nine learning activities included in the assessment tools that did not reach the established quality indicators (p<0.05). There are statistically significant differences depending on the hospital and clinical practices unit (p<0.05). the analysis of the evaluation tools used in the article "Nursing Care in Welfare Processes" of the analyzed university undergraduate course enabled the detection of the areas for improvement in the teachinglearning process. The challenge of education in nursing is to reach the best clinical research and educational results, in order to provide improvements to the quality of education and health care.

Evaluating treatment process redesign by applying the EFQM Excellence Model.

PubMed

Nabitz, Udo; Schramade, Mark; Schippers, Gerard

2006-10-01

To evaluate a treatment process redesign programme implementing evidence-based treatment as part of a total quality management in a Dutch addiction treatment centre. Quality management was monitored over a period of more than 10 years in an addiction treatment centre with 550 professionals. Changes are evaluated, comparing the scores on the nine criteria of the European Foundation for Quality Management (EFQM) Excellence Model before and after a major redesign of treatment processes and ISO certification. In the course of 10 years, most intake, care, and cure processes were reorganized, the support processes were restructured and ISO certified, 29 evidence-based treatment protocols were developed and implemented, and patient follow-up measuring was established to make clinical outcomes transparent. Comparing the situation before and after the changes shows that the client satisfaction scores are stable, that the evaluation by personnel and society is inconsistent, and that clinical, production, and financial outcomes are positive. The overall EFQM assessment by external assessors in 2004 shows much higher scores on the nine criteria than the assessment in 1994. Evidence-based treatment can successfully be implemented in addiction treatment centres through treatment process redesign as part of a total quality management strategy, but not all results are positive.

Psychometric evaluation of the Swedish adaptation of the Inventory for Assessing the Process of Cultural Competence Among Healthcare Professionals--Revised (IAPCC-R).

PubMed

Olt, Helen; Jirwe, Maria; Gustavsson, Petter; Emami, Azita

2010-01-01

The purpose of this study was to describe the translation, adaption, and psychometric evaluation process in relation to validity and reliability of the Swedish version of the instrument, Inventory for Assessing The Process of Cultural Competence Among Healthcare Professionals-Revised (IAPCC-R) following the translation, adaptation, and psychometric evaluation process. Validity tests were conducted on the response processes (N = 15), the content (N = 7), and the internal structure of the instrument (N = 334). Reliability (alpha = .65 for the total scale varying between -.01 and .65 for the different subscales) was evaluated in terms of internal consistency. Results indicated weak validity and reliability though it is difficult to conclude whether this is related to adaptation issues or the original construction.The testing of the response process identified problems in relation to respondents' conceptualization of cultural competence. The test of the content identified a weak correspondence between the items and the underlying model. In addition, a confirmatory factor analysis did not confirm the proposed structure of the instrument. This study concludes that this instrument is not valid and reliable for use with a Swedish population of practicing nurses or nursing students.

Evaluation of the Academic Occupational Program of the County of Leduc, From September, 1981 to June, 1984. Executive Summary.

ERIC Educational Resources Information Center

Nyberg, V. R.

The paper reports results of an academic occupational program intended for educable mentally handicapped and learning disabled secondary students in Leduc, Alberta. An introduction reviews history of the program and the evaluation process. The evaluation plan, based on R. Stake's model for program evaluation, is described, and sources of data…

Signal processing for non-destructive testing of railway tracks

NASA Astrophysics Data System (ADS)

Heckel, Thomas; Casperson, Ralf; Rühe, Sven; Mook, Gerhard

2018-04-01

Increased speed, heavier loads, altered material and modern drive systems result in an increasing number of rail flaws. The appearance of these flaws also changes continually due to the rapid change in damage mechanisms of modern rolling stock. Hence, interpretation has become difficult when evaluating non-destructive rail testing results. Due to the changed interplay between detection methods and flaws, the recorded signals may result in unclassified types of rail flaws. Methods for automatic rail inspection (according to defect detection and classification) undergo continual development. Signal processing is a key technology to master the challenge of classification and maintain resolution and detection quality, independent of operation speed. The basic ideas of signal processing, based on the Glassy-Rail-Diagram for classification purposes, are presented herein. Examples for the detection of damages caused by rolling contact fatigue also are given, and synergetic effects of combined evaluation of diverse inspection methods are shown.

Evaluating the iterative development of VR/AR human factors tools for manual work.

PubMed

Liston, Paul M; Kay, Alison; Cromie, Sam; Leva, Chiara; D'Cruz, Mirabelle; Patel, Harshada; Langley, Alyson; Sharples, Sarah; Aromaa, Susanna

2012-01-01

This paper outlines the approach taken to iteratively evaluate a set of VR/AR (virtual reality / augmented reality) applications for five different manual-work applications - terrestrial spacecraft assembly, assembly-line design, remote maintenance of trains, maintenance of nuclear reactors, and large-machine assembly process design - and examines the evaluation data for evidence of the effectiveness of the evaluation framework as well as the benefits to the development process of feedback from iterative evaluation. ManuVAR is an EU-funded research project that is working to develop an innovative technology platform and a framework to support high-value, high-knowledge manual work throughout the product lifecycle. The results of this study demonstrate the iterative improvements reached throughout the design cycles, observable through the trending of the quantitative results from three successive trials of the applications and the investigation of the qualitative interview findings. The paper discusses the limitations of evaluation in complex, multi-disciplinary development projects and finds evidence of the effectiveness of the use of the particular set of complementary evaluation methods incorporating a common inquiry structure used for the evaluation - particularly in facilitating triangulation of the data.

A System Evaluation Theory Analyzing Value and Results Chain for Institutional Accreditation in Oman

ERIC Educational Resources Information Center

Paquibut, Rene Ymbong

2017-01-01

Purpose: This paper aims to apply the system evaluation theory (SET) to analyze the institutional quality standards of Oman Academic Accreditation Authority using the results chain and value chain tools. Design/methodology/approach: In systems thinking, the institutional standards are connected as input, process, output and feedback and leads to…

Sensitizing Children to the Social and Emotional Mechanisms Involved in Racism: A Program Evaluation

ERIC Educational Resources Information Center

Triliva, Sofia; Anagnostopoulou, Tanya; Vleioras, Georgios

2014-01-01

This paper describes and discusses the results of an intervention aiming to sensitize children to the social and emotional processes involved in racism. The intervention was applied and evaluated in 10 Greek elementary schools. The goals and the intervention methods of the program modules are briefly outlined and the results of the program…

Investigation of low cost material processes for liquid rocket engines

NASA Technical Reports Server (NTRS)

Nguyentat, Thinh; Kawashige, Chester M.; Scala, James G.; Horn, Ronald M.

1993-01-01

The development of low cost material processes is essential to the achievement of economical liquid rocket propulsion systems in the next century. This paper will present the results of the evaluation of some promising material processes including powder metallurgy, vacuum plasma spray, metal spray forming, and bulge forming. The physical and mechanical test results from the samples and subscale hardware fabricated from high strength copper alloys and superalloys will be discussed.

Fetterman-House: A Process Use Distinction and a Theory.

ERIC Educational Resources Information Center

Fetterman, David

2003-01-01

Discusses the concept of process use as an important distinction between the evaluation theories of E. House and D. Fetterman, thus helping to explain the discordant results of C. Christie for these two theories. (SLD)

Superconductivity devices: Commercial use of space

NASA Technical Reports Server (NTRS)

Haertling, Gene; Furman, Eugene; Hsi, Chi-Shiung; Li, Guang

1993-01-01

The processing and screen printing of the superconducting BSCCO and 123 YBCO materials on substrates is described. The resulting superconducting properties and the use of these materials as possible electrode materials for ferroelectrics at 77 K are evaluated. Also, work performed in the development of solid-state electromechanical actuators is reported. Specific details include the fabrication and processing of high strain PBZT and PLZT electrostrictive materials, the development of PSZT and PMN-based ceramics, and the testing and evaluation of these electrostrictive materials. Finally, the results of studies on a new processing technology for preparing piezoelectric and electrostrictive ceramic materials are summarized. The process involves a high temperature chemical reduction which leads to an internal pre-stressing of the oxide wafer. These reduced and internally biased oxide wafers (RAINBOW) can produce bending-mode actuator devices which possess a factor of ten more displacement and load bearing capacity than present-day benders.

Quality of Electronic Nursing Records: The Impact of Educational Interventions During a Hospital Accreditation Process.

PubMed

Nomura, Aline Tsuma Gaedke; Pruinelli, Lisiane; da Silva, Marcos Barragan; Lucena, Amália de Fátima; Almeida, Miriam de Abreu

2018-03-01

Hospital accreditation is a strategy for the pursuit of quality of care and safety for patients and professionals. Targeted educational interventions could help support this process. This study aimed to evaluate the quality of electronic nursing records during the hospital accreditation process. A retrospective study comparing 112 nursing records during the hospital accreditation process was conducted. Educational interventions were implemented, and records were evaluated preintervention and postintervention. Mann-Whitney and χ tests were used for data analysis. Results showed that there was a significant improvement in the nursing documentation quality postintervention. When comparing records preintervention and postintervention, results showed a statistically significant difference (P < .001) between the two periods. The comparison between items showed that most scores were significant. Findings indicated that educational interventions performed by nurses led to a positive change that improved nursing documentation and, consequently, better care practices.

Localized analysis of paint-coat drying using dynamic speckle interferometry

NASA Astrophysics Data System (ADS)

Sierra-Sosa, Daniel; Tebaldi, Myrian; Grumel, Eduardo; Rabal, Hector; Elmaghraby, Adel

2018-07-01

The paint-coating is part of several industrial processes, including the automotive industry, architectural coatings, machinery and appliances. These paint-coatings must comply with high quality standards, for this reason evaluation techniques from paint-coatings are in constant development. One important factor from the paint-coating process is the drying, as it has influence on the quality of final results. In this work we present an assessment technique based on the optical dynamic speckle interferometry, this technique allows for the temporal activity evaluation of the paint-coating drying process, providing localized information from drying. This localized information is relevant in order to address the drying homogeneity, optimal drying, and quality control. The technique relies in the definition of a new temporal history of the speckle patterns to obtain the local activity; this information is then clustered to provide a convenient indicative of different drying process stages. The experimental results presented were validated using the gravimetric drying curves

A risk-based approach to management of leachables utilizing statistical analysis of extractables.

PubMed

Stults, Cheryl L M; Mikl, Jaromir; Whelehan, Oliver; Morrical, Bradley; Duffield, William; Nagao, Lee M

2015-04-01

To incorporate quality by design concepts into the management of leachables, an emphasis is often put on understanding the extractable profile for the materials of construction for manufacturing disposables, container-closure, or delivery systems. Component manufacturing processes may also impact the extractable profile. An approach was developed to (1) identify critical components that may be sources of leachables, (2) enable an understanding of manufacturing process factors that affect extractable profiles, (3) determine if quantitative models can be developed that predict the effect of those key factors, and (4) evaluate the practical impact of the key factors on the product. A risk evaluation for an inhalation product identified injection molding as a key process. Designed experiments were performed to evaluate the impact of molding process parameters on the extractable profile from an ABS inhaler component. Statistical analysis of the resulting GC chromatographic profiles identified processing factors that were correlated with peak levels in the extractable profiles. The combination of statistically significant molding process parameters was different for different types of extractable compounds. ANOVA models were used to obtain optimal process settings and predict extractable levels for a selected number of compounds. The proposed paradigm may be applied to evaluate the impact of material composition and processing parameters on extractable profiles and utilized to manage product leachables early in the development process and throughout the product lifecycle.

Dielectric loss property of strong acids doped polyaniline (PANi)

NASA Astrophysics Data System (ADS)

Amalia, Rianti; Hafizah, Mas Ayu Elita; Andreas, Manaf, Azwar

2018-04-01

In this study, strong acid doped polyaniline (PANi) has been successfully fabricated through the chemical oxidative polymerization process with various polymerization times. Nonconducting PANi resulting from the polymerization process at various polymerization times were then doped by a strong acid HClO4 to generate dielectric properties. Ammonium Persulfate (APS) as an initiator was used during Polymerization process to develop dark green precipitates which then called Emeraldine Base Polyaniline (PANi-EB). The PANi-EB was successively doped by strong acid HClO4 with dopant and PANi ratio 10:1 to enhance the electrical conductivity. The conductivity of doped PANi was evaluated by Four Point Probe. Results of evaluation showed that the conductivity values of HClO4 doped PANi were in the range 337-363 mS/cm. The dielectric properties of doped PANi were evaluated by Vector Network Analyzer (VNA) which suggested that an increase in the permittivity value in the conducting PANi. It is concluded that PANi could be a potential candidate for electromagnetic waves absorbing materials.

Interpersonal relationship modulates brain responses to outcome evaluation when gambling for/against others: an electrophysiological analysis.

PubMed

Leng, Yue; Zhou, Xiaolin

2014-10-01

When individuals play a gambling task and their actions have consequences for observers, how are the brain responses of the performers modulated by their interpersonal relationship with the observers? To address this issue, we examined the event-related potentials responses in performers while they played two gambling games: one during which they tried to earn money for the observers instead of themselves (i.e., Experiment 1) and another gambling game during which they attempted to earn money from the observers (i.e., Experiment 2). In Experiment 1, ERP results showed that when gambling for either the friends or the strangers, the feedback-related negativity (FRN) responses were more negative-going to the losses than to the gains. The FRN effect (loss minus gain) was significantly larger when gambling for the friends than for the strangers. The general P300 response was more positive-going when gambling for the friends than for the strangers. These results suggested that gambling for others enables individuals to assess the outcome from the interests of the other people, consequently, the FRN response may be driven by the evaluative process related to interests of the others. Because one׳s own economic interests were not involved, the performers׳ brain responses during both the early, semi-automatic stage (i.e., the FRN) and the later, controlled stage (i.e., the P300) of outcome evaluation were modulated by the interpersonal relationship between the performers and the observers. In Experiment 2, ERP results revealed that when gambling against others, the FRN response was more negative-going to the losses than to the gains, as well. However, neither the FRN effect nor the general FRN response was modulated by interpersonal relationship. The general P300 response was more positive-going when gambling against the stranger than against the friend. These results suggested that when gambling against others, the performers׳ FRN response may be driven by two evaluative processes: one is related to the interests of their own, and another is related to the interests of the other people; and the former one plays a dominant role. Because of highly self-involvement, only the performers׳ brain responses during the later controlled stage of outcome evaluation were modulated by interpersonal relationship. The present study extended previous research on brain responses to outcome evaluation when decision making actions have consequences for the other people by suggesting that the FRN response in the performer could also be driven by two evaluative processes. In addition, whether the FRN in the performer was modulated by interpersonal relationship depends on which evaluative process plays a dominant role. However, the P300 in the performer could always be modulated by interpersonal relationship. These findings provide evidence on outcome evaluation being composed of an early semi-automatic primitive process and a later controlled cognitive/affective appraisal process. Copyright © 2014 Elsevier Ltd. All rights reserved.

Investigation of Test Methods, Material Properties and Processes for Solar Cell Encapsulants

NASA Technical Reports Server (NTRS)

Willis, P.; Baum, B.

1982-01-01

The evaluation of potentially useful low cost encapsulation materials is discussed. The goal is to identify, evaluate, test and recommend encapsulant materials and processes for the production of cost effective, long life solar cell modules. Technical investigations concerned the development of advanced cure chemistries for lamination type pottants; the continued evaluation of soil resistant surface treatment, and the results of an accelerated aging test program for the comparison of material stabilities. New compounds were evaluated for efficiency in curing both ethylene/vinyl acetate and ethylene/methyl acrylate pottants intended for vacuum bag lamination of solar cells. Two component aliphatic urethane casting syrups were evaluated for suitability as solar module pottants on the basis of optical, physical and fabrication characteristics.

Process factors explaining the ineffectiveness of a multidisciplinary fall prevention programme: A process evaluation

PubMed Central

Bleijlevens, Michel HC; Hendriks, Marike RC; van Haastregt, Jolanda CM; van Rossum, Erik; Kempen, Gertrudis IJM; Diederiks, Joseph PM; Crebolder, Harry FJM; van Eijk, Jacques ThM

2008-01-01

Background Falls are a major health threat to older community-living people, and initiatives to prevent falls should be a public health priority. We evaluated a Dutch version of a successful British fall prevention programme. Results of this Dutch study showed no effects on falls or daily functioning. In parallel to the effect evaluation, we carried out a detailed process evaluation to assess the feasibility of our multidisciplinary fall prevention programme. The present study reports on the results of this process evaluation. Methods Our fall prevention programme comprised a medical and occupational-therapy assessment, resulting in recommendations and/or referrals to other services if indicated. We used self-administered questionnaires, structured telephone interviews, structured recording forms, structured face-to-face interviews and a plenary group discussion to collect data from participants allocated to the intervention group (n = 166) and from all practitioners who performed the assessments (n = 8). The following outcomes were assessed: the extent to which the multidisciplinary fall prevention programme was performed according to protocol, the nature of the recommendations and referrals provided to the participants, participants' self-reported compliance and participants' and practitioners' opinions about the programme. Results Both participants and practitioners judged the programme to be feasible. The programme was largely performed according to protocol. The number of referrals and recommendations ensuing from the medical assessment was relatively small. Participants' self-reported compliance as regards contacting their GP to be informed of the recommendations and/or referrals was low to moderate. However, self-reported compliance with such referrals and recommendations was reasonable to good. A large majority of participants reported they had benefited from the programme. Conclusion The results of the present study show that the programme was feasible for both practitioners and participants. Main factors that seem to be responsible for the lack of effectiveness are the relatively low number of referrals and recommendations ensuing from the medical assessments and participants' low compliance as regards contacting their GP about the results of the medical assessment. We do not recommend implementing the programme in its present form in regular care. Trial registration ISRCTN64716113 PMID:18816381

Evaluation of shrinking core model in leaching process of Pomalaa nickel laterite using citric acid as leachant at atmospheric conditions

NASA Astrophysics Data System (ADS)

Wanta, K. C.; Perdana, I.; Petrus, H. T. B. M.

2016-11-01

Most of kinetics studies related to leaching process used shrinking core model to describe physical phenomena of the process. Generally, the model was developed in connection with transport and/or reaction of reactant components. In this study, commonly used internal diffusion controlled shrinking core model was evaluated for leaching process of Pomalaa nickel laterite using citric acid as leachant. Particle size was varied at 60-70, 100-120, -200 meshes, while the operating temperature was kept constant at 358 K, citric acid concentration at 0.1 M, pulp density at 20% w/v and the leaching time was for 120 minutes. Simulation results showed that the shrinking core model was inadequate to closely approach the experimental data. Meanwhile, the experimental data indicated that the leaching process was determined by the mobility of product molecules in the ash layer pores. In case of leaching resulting large product molecules, a mathematical model involving steps of reaction and product diffusion might be appropriate to develop.

[Development and Process Evaluation of the e-Mental Health Portal www.psychenet.de for the Hamburg Network for Mental Health].

PubMed

Dirmaier, Jörg; Tlach, Lisa; Liebherz, Sarah; Kocalevent, Rüya; Sänger, Sylvia; Thiel, Juliane; Härter, Martin

2015-07-01

The purpose of this project was to develop a user-centered web-portal for empowerment in mental disorders. The development of the portal included mixed-methods techniques for needs assessment to identify user-relevant content. Exposure and use of the portal was investigated as part of a process evaluation. psychenet.de informs about mental disorders and treatment option. Results of the process evaluation showed a highly accessed website, the portal was assessed as "good" or "very good" by 73 % of the respondents. Using psychenet.de attempts to raise awareness, to inform about mental disorders, and to engage patients in the course of their treatment. © Georg Thieme Verlag KG Stuttgart · New York.

Evaluation of Treatment Technologies for Wastewater from Insensitive Munitions Production. Phase 1: Technology Down-Selection

DTIC Science & Technology

2013-11-01

the AOP reactor according to the target process formulation. Gases were vented to a GAC vessel. ERDC/EL TR-13-20 94 10.2.2 Results and Discussion...destructive and filtration methods such as biological treatment (destructive), chemical reduction (destructive), reverse osmosis (RO)/nano- filtration ... filtration ), and advanced oxidation processes (destructive). A comprehensive evaluation of alternatives relies on a detailed list of criteria, allowing for

Remote terminal system evaluation

NASA Technical Reports Server (NTRS)

Phillips, T. L.; Grams, H. L.; Lindenlaub, J. C.; Schwingendorf, S. K.; Swain, P. H.; Simmons, W. R.

1975-01-01

An Earth Resources Data Processing System was developed to evaluate the system for training, technology transfer, and data processing. In addition to the five sites included in this project two other sites were connected to the system under separate agreements. The experience of these two sites is discussed. The results of the remote terminal project are documented in seven reports: one from each of the five project sites, Purdue University, and an overview report summarizing the other six reports.

Evaluation of massless-spring modeling of suspension-line elasticity during the parachute unfurling process

NASA Technical Reports Server (NTRS)

Poole, L. R.; Huckins, E. K., III

1972-01-01

A general theory on mathematical modeling of elastic parachute suspension lines during the unfurling process was developed. Massless-spring modeling of suspension-line elasticity was evaluated in detail. For this simple model, equations which govern the motion were developed and numerically integrated. The results were compared with flight test data. In most regions, agreement was satisfactory. However, poor agreement was obtained during periods of rapid fluctuations in line tension.

On the automatic activation of attitudes: a quarter century of evaluative priming research.

PubMed

Herring, David R; White, Katherine R; Jabeen, Linsa N; Hinojos, Michelle; Terrazas, Gabriela; Reyes, Stephanie M; Taylor, Jennifer H; Crites, Stephen L

2013-09-01

Evaluation is a fundamental concept in psychological science. Limitations of self-report measures of evaluation led to an explosion of research on implicit measures of evaluation. One of the oldest and most frequently used implicit measurement paradigms is the evaluative priming paradigm developed by Fazio, Sanbonmatsu, Powell, and Kardes (1986). This paradigm has received extensive attention in psychology and is used to investigate numerous phenomena ranging from prejudice to depression. The current review provides a meta-analysis of a quarter century of evaluative priming research: 73 studies yielding 125 independent effect sizes from 5,367 participants. Because judgments people make in evaluative priming paradigms can be used to tease apart underlying processes, this meta-analysis examined the impact of different judgments to test the classic encoding and response perspectives of evaluative priming. As expected, evidence for automatic evaluation was found, but the results did not exclusively support either of the classic perspectives. Results suggest that both encoding and response processes likely contribute to evaluative priming but are more nuanced than initially conceptualized by the classic perspectives. Additionally, there were a number of unexpected findings that influenced evaluative priming such as segmenting trials into discrete blocks. We argue that many of the findings of this meta-analysis can be explained with 2 recent evaluative priming perspectives: the attentional sensitization/feature-specific attention allocation and evaluation window perspectives. (c) 2013 APA, all rights reserved.

Development, implementation and evaluation of a peer review of teaching (PRoT) initiative in nursing education.

PubMed

Mager, Diana R; Kazer, Meredith W; Conelius, Jaclyn; Shea, Joyce; Lippman, Doris T; Torosyan, Roben; Nantz, Kathryn

2014-06-03

For many years, an area of research in higher education has been emerging around the development and implementation of fair and effective peer evaluation programs. Recently, a new body of knowledge has developed regarding the development and implementation of fair and effective peer evaluation programs resulting in formative and summative evaluations. The purpose of this article is to describe the development, implementation, and evaluation of a peer review of teaching (PRoT) program for nursing faculty, initiated at one small comprehensive university in the northeastern United States. Pairs of nursing faculty evaluated each other's teaching, syllabi, and course materials after collaborating in a pre-evaluation conference to discuss goals of the classroom visit. Qualitative data gathered in post project focus groups revealed that faculty found their modified PRoT process to be a mutually beneficial experience that was more useful, flexible and collegial, and less stressful than their previous evaluation process.

Evaluation results for intelligent transport systems (ITS) : abstract

DOT National Transportation Integrated Search

2000-11-09

This paper summarizes the methods of evaluation set out for EC-funded ITS research and demonstration projects, known as the CONVERGE validation quality process and the lessons learned from that approach. The new approach to appraisal, which is being ...

Risk-based evaluation of commercial motor vehicle roadside violations : process and results

DOT National Transportation Integrated Search

2010-09-01

This report provides an analytic framework for evaluating the Atlanta Congestion Reduction Demonstration (CRD) under the United States Department of Transportation (U.S. DOT) Urban Partnership Agreement (UPA) and CRD Programs. The Atlanta CRD project...

Identifying and Evaluating External Validity Evidence for Passing Scores

ERIC Educational Resources Information Center

Davis-Becker, Susan L.; Buckendahl, Chad W.

2013-01-01

A critical component of the standard setting process is collecting evidence to evaluate the recommended cut scores and their use for making decisions and classifying students based on test performance. Kane (1994, 2001) proposed a framework by which practitioners can identify and evaluate evidence of the results of the standard setting from (1)…

Health Care Merged With Senior Housing: Description and Evaluation of a Successful Program.

PubMed

Barry, Theresa Teta

2017-01-01

Objective: This article describes and evaluates a successful partnership between a large health care organization and housing for seniors. The program provides on-site, primary care visits by a physician and a nurse in addition to intensive social services to residents in an affordable senior housing apartment building located in Pennsylvania. Per Donabedian's "Structure-Process-Outcome" model, the program demonstrated positive health care outcomes for its participants via a prescribed structure. To provide guidance for replication in similar settings, we qualitatively evaluated the processes by which successful outcomes were obtained. Methods: With program structures in place and outcomes measured, this case study collected and analyzed qualitative information taken from key informant interviews on care processes involved in the program. Themes were extracted from semistructured interviews and used to describe the processes that helped and hindered the program. Results and Discussion: Common processes were identified across respondents; however, the nuanced processes that lead to successful outcomes suggest that defined structures and processes may not be sufficient to produce similar outcomes in other settings. Further research is needed to determine the program's replicability and policy implications.

Improving environmental impact and cost assessment for supplier evaluation

NASA Astrophysics Data System (ADS)

Beucker, Severin; Lang, Claus

2004-02-01

Improving a company"s environmental and financial performance necessitates the evaluation of environmental impacts deriving from the production and cost effects of corporate actions. These effects have to be made transparent and concrete targets have to be developed. Such an evaluation has to be done on a regular basis but with limited expenses. To achieve this, different instruments of environmental controlling such as LCA and environmental performance indicators have to be combined with methods from cost accounting. Within the research project CARE (Computer Aided Resource Efficiency Accounting for Medium-Sized Enterprises), the method Resource Efficiency Accounting (REA) is used to give the participating companies new insights into hidden costs and environmental effects of their production and products. The method combines process based cost accounting with environmental impact assessment methodology and offers results that can be integrated into a company"s environmental controlling system and business processes like cost accounting, supplier assessment, etc. Much of the data necessary for the combined assessment can be available within a company"s IT system and therefore can be efficiently used for the assessment process. The project CARE puts a strong focus on the use of company data and information systems for the described assessment process and offers a methodological background for the evaluation and the structuring of such data. Besides the general approach of the project CARE the paper will present results from a case study in which the described approach is used for the evaluation of suppliers.

Applying the Quadruple Process Model to Evaluate Change in Implicit Attitudinal Responses During Therapy for Panic Disorder

PubMed Central

Clerkin, Elise M.; Fisher, Christopher R.; Sherman, Jeffrey W.; Teachman, Bethany A.

2013-01-01

Objective This study explored the automatic and controlled processes that may influence performance on an implicit measure across cognitive-behavioral group therapy for panic disorder. Method The Quadruple Process model was applied to error scores from an Implicit Association Test evaluating associations between the concepts Me (vs. Not Me) + Calm (vs. Panicked) to evaluate four distinct processes: Association Activation, Detection, Guessing, and Overcoming Bias. Parameter estimates were calculated in the panic group (n=28) across each treatment session where the IAT was administered, and at matched times when the IAT was completed in the healthy control group (n=31). Results Association Activation for Me + Calm became stronger over treatment for participants in the panic group, demonstrating that it is possible to change automatically activated associations in memory (vs. simply overriding those associations) in a clinical sample via therapy. As well, the Guessing bias toward the calm category increased over treatment for participants in the panic group. Conclusions This research evaluates key tenets about the role of automatic processing in cognitive models of anxiety, and emphasizes the viability of changing the actual activation of automatic associations in the context of treatment, versus only changing a person’s ability to use reflective processing to overcome biased automatic processing. PMID:24275066

An empirical method for dynamic camouflage assessment

NASA Astrophysics Data System (ADS)

Blitch, John G.

2011-06-01

As camouflage systems become increasingly sophisticated in their potential to conceal military personnel and precious cargo, evaluation methods need to evolve as well. This paper presents an overview of one such attempt to explore alternative methods for empirical evaluation of dynamic camouflage systems which aspire to keep pace with a soldier's movement through rapidly changing environments that are typical of urban terrain. Motivating factors are covered first, followed by a description of the Blitz Camouflage Assessment (BCA) process and results from an initial proof of concept experiment conducted in November 2006. The conclusion drawn from these results, related literature and the author's personal experience suggest that operational evaluation of personal camouflage needs to be expanded beyond its foundation in signal detection theory and embrace the challenges posed by high levels of cognitive processing.

Evaluation of low-dose irradiation on microbiological quality of white carrots and string beans

NASA Astrophysics Data System (ADS)

Koike, Amanda C. R.; Santillo, Amanda G.; Rodrigues, Flávio T.; Duarte, Renato C.; Villavicencio, Anna Lucia C. H.

2012-08-01

The minimally processed food provided the consumer with a product quality, safety and practicality. However, minimal processing of food does not reduce pathogenic population of microorganisms to safe levels. Ionizing radiation used in low doses is effective to maintain the quality of food, reducing the microbiological load but rather compromising the nutritional values and sensory property. The association of minimal processing with irradiation could improve the quality and safety of product. The purpose of this study was to evaluate the effectiveness of low-doses of ionizing radiation on the reduction of microorganisms in minimally processed foods. The results show that the ionizing radiation of minimally processed vegetables could decontaminate them without several changes in its properties.

Artificial intelligence and signal processing for infrastructure assessment

NASA Astrophysics Data System (ADS)

Assaleh, Khaled; Shanableh, Tamer; Yehia, Sherif

2015-04-01

The Ground Penetrating Radar (GPR) is being recognized as an effective nondestructive evaluation technique to improve the inspection process. However, data interpretation and complexity of the results impose some limitations on the practicality of using this technique. This is mainly due to the need of a trained experienced person to interpret images obtained by the GPR system. In this paper, an algorithm to classify and assess the condition of infrastructures utilizing image processing and pattern recognition techniques is discussed. Features extracted form a dataset of images of defected and healthy slabs are used to train a computer vision based system while another dataset is used to evaluate the proposed algorithm. Initial results show that the proposed algorithm is able to detect the existence of defects with about 77% success rate.

HESS Opinions: The need for process-based evaluation of large-domain hyper-resolution models

NASA Astrophysics Data System (ADS)

Melsen, Lieke A.; Teuling, Adriaan J.; Torfs, Paul J. J. F.; Uijlenhoet, Remko; Mizukami, Naoki; Clark, Martyn P.

2016-03-01

A meta-analysis on 192 peer-reviewed articles reporting on applications of the variable infiltration capacity (VIC) model in a distributed way reveals that the spatial resolution at which the model is applied has increased over the years, while the calibration and validation time interval has remained unchanged. We argue that the calibration and validation time interval should keep pace with the increase in spatial resolution in order to resolve the processes that are relevant at the applied spatial resolution. We identified six time concepts in hydrological models, which all impact the model results and conclusions. Process-based model evaluation is particularly relevant when models are applied at hyper-resolution, where stakeholders expect credible results both at a high spatial and temporal resolution.

HESS Opinions: The need for process-based evaluation of large-domain hyper-resolution models

NASA Astrophysics Data System (ADS)

Melsen, L. A.; Teuling, A. J.; Torfs, P. J. J. F.; Uijlenhoet, R.; Mizukami, N.; Clark, M. P.

2015-12-01

A meta-analysis on 192 peer-reviewed articles reporting applications of the Variable Infiltration Capacity (VIC) model in a distributed way reveals that the spatial resolution at which the model is applied has increased over the years, while the calibration and validation time interval has remained unchanged. We argue that the calibration and validation time interval should keep pace with the increase in spatial resolution in order to resolve the processes that are relevant at the applied spatial resolution. We identified six time concepts in hydrological models, which all impact the model results and conclusions. Process-based model evaluation is particularly relevant when models are applied at hyper-resolution, where stakeholders expect credible results both at a high spatial and temporal resolution.

WORLDWIDE COLLECTION AND EVALUATION OF EARTHQUAKE DATA

DTIC Science & Technology

period, the hypocenter and magnitude programs were tested and then used to process January 1964 data at the computer facilities of the Environmental ... Science Services Administration (ESSA), Suitland, Maryland, using the CDC 6600 computer. Results of this processing are shown.

Palatability of sous vide processed chicken breast.

PubMed

Turner, B E; Larick, D K

1996-08-01

The influences of brine composition, internal temperature, heating rate, and storage periods up to 28 d on flavor, texture, and color of sous vide processed chicken breast were evaluated. Pectoralis major muscles containing water and sodium chloride, with or without sodium lactate, were browned and vacuum packaged. Sous vide processing was by fast or slow heating to an internal temperature of 77 or 94 C. Product was evaluated after 0, 14, and 28 d storage at 4 C. Quality was evaluated by gas chromatographic analyses of flavor volatiles, shear, color, and sensory panels. Incorporation of sodium lactate into brine did not influence oxidative stability (as measured by headspace gas chromatography) or sensory warmed-over flavor. Presence of sodium lactate did result in enhanced fresh roasted or meaty and saltiness sensory scores as well as a more yellow color. The more rapid heating rate decreased sulfur-containing compounds and did not influence other volatile concentrations. Products processed to 94 C were less juicy, less tender, and contained higher quantities of alcohols and hydrocarbons than those processed to 77 C. Storage resulted in a decline in fresh roasted or meaty flavor note and an increase in warmed-over flavor note and quantities of alcohols, aldehydes and ketones, hydrocarbons, and total headspace volatiles.

St. Louis demonstration final report: refuse processing plant equipment, facilities, and environmental evaluations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fiscus, D.E.; Gorman, P.G.; Schrag, M.P.

1977-09-01

The results are presented of processing plant evaluations of the St. Louis-Union Electric Refuse Fuel Project, including equipment and facilities as well as assessment of environmental emissions at both the processing and the power plants. Data on plant material flows and operating parameters, plant operating costs, characteristics of plant material flows, and emissions from various processing operations were obtained during a testing program encompassing 53 calendar weeks. Refuse derived fuel (RDF) is the major product (80.6% by weight) of the refuse processing plant, the other being ferrous metal scrap, a marketable by-product. Average operating costs for the entire evaluation periodmore » were $8.26/Mg ($7.49/ton). The average overall processing rate for the period was 168 Mg/8-h day (185.5 tons/8-h day) at 31.0 Mg/h (34.2 tons/h). Future plants using an air classification system of the type used at the St. Louis demonstration plant will need an emissions control device for particulates from the large de-entrainment cyclone. Also in the air exhaust from the cyclone were total counts of bacteria and viruses several times higher than those of suburban ambient air. No water effluent or noise exposure problems were encountered, although landfill leachate mixed with ground water could result in contamination, given low dilution rates.« less

Mechanisms of masked evaluative priming: task sets modulate behavioral and electrophysiological priming for picture and words differentially.

PubMed

Kiefer, Markus; Liegel, Nathalie; Zovko, Monika; Wentura, Dirk

2017-04-01

Research with the evaluative priming paradigm has shown that affective evaluation processes reliably influence cognition and behavior, even when triggered outside awareness. However, the precise mechanisms underlying such subliminal evaluative priming effects, response activation vs semantic processing, are matter of a debate. In this study, we determined the relative contribution of semantic processing and response activation to masked evaluative priming with pictures and words. To this end, we investigated the modulation of masked pictorial vs verbal priming by previously activated perceptual vs semantic task sets and assessed the electrophysiological correlates of priming using event-related potential (ERP) recordings. Behavioral and electrophysiological effects showed a differential modulation of pictorial and verbal subliminal priming by previously activated task sets: Pictorial priming was only observed during the perceptual but not during the semantic task set. Verbal priming, in contrast, was found when either task set was activated. Furthermore, only verbal priming was associated with a modulation of the N400 ERP component, an index of semantic processing, whereas a priming-related modulation of earlier ERPs, indexing visuo-motor S-R activation, was found for both picture and words. The results thus demonstrate that different neuro-cognitive processes contribute to unconscious evaluative priming depending on the stimulus format. © The Author (2016). Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

Using a Systematic Conceptual Model for a Process Evaluation of a Middle School Obesity Risk-Reduction Nutrition Curriculum Intervention: Choice, Control & Change

PubMed Central

Lee, Heewon; Contento, Isobel R.; Koch, Pamela

2012-01-01

Objective To use and review a conceptual model of process evaluation and to examine the implementation of a nutrition education curriculum, Choice, Control & Change, designed to promote dietary and physical activity behaviors that reduce obesity risk. Design A process evaluation study based on a systematic conceptual model. Setting Five middle schools in New York City. Participants 562 students in 20 classes and their science teachers (n=8). Main Outcome Measures Based on the model, teacher professional development, teacher implementation, and student reception were evaluated. Also measured were teacher characteristics, teachers’ curriculum evaluation, and satisfaction with teaching the curriculum. Analysis Descriptive statistics and Spearman’s Rho Correlation for quantitative analysis and content analysis for qualitative data were used. Results Mean score of the teacher professional development evaluation was 4.75 on a 5-point scale. Average teacher implementation rate was 73%, and student reception rate was 69%. Ongoing teacher support was highly valued by teachers. Teachers’ satisfaction with teaching the curriculum was highly correlated with students’ satisfaction (p <.05). Teachers’ perception of amount of student work was negatively correlated with implementation and with student satisfaction (p<.05). Conclusions and implications Use of a systematic conceptual model and comprehensive process measures improves understanding of the implementation process and helps educators to better implement interventions as designed. PMID:23321021

Psychometric Characteristics of Process Evaluation Measures for a Rural School-based Childhood Obesity Prevention Study: Louisiana Health

PubMed Central

Newton, R. L.; Thomson, J. L.; Rau, K.; Duhe’, S.; Sample, A.; Singleton, N.; Anton, S. D.; Webber, L. S.; Williamson, D. A.

2011-01-01

Purpose To evaluate the implementation of intervention components of the Louisiana Health study, which was a multi-component childhood obesity prevention program conducted in rural schools. Design Content analysis. Setting Process evaluation assessed implementation in the classrooms, gym classes, and cafeterias. Subjects Classroom teachers (n = 232), physical education teachers (n = 53), food service managers (n = 33), and trained observers (n = 9). Measures Five process evaluation measures were created: Physical Education Questionnaire (PEQ), Intervention Questionnaire (IQ), Food Service Manager Questionnaire (FSMQ), Classroom Observation (CO) and School Nutrition Environment Observation (SNEO). Analysis Inter-rater reliability and internal consistency were conducted on all measures. ANOVA and Chi-square were used to compare differences across study groups on questionnaires and observations. Results The PEQ and one sub-scale from the FSMQ were eliminated because their reliability coefficients fell below acceptable standards. The sub-scale internal consistencies for the IQ, FSMQ, CO, and SNEO (all Cronbach’s α > .60) were acceptable. Conclusions After the initial 4 months of intervention, there was evidence that the Louisiana Health intervention was being implemented as it was designed. In summary, four process evaluation measures were found to be sufficiently reliable and valid for assessing the delivery of various aspects of a school-based obesity prevention program. These process measures could be modified to evaluate the delivery of other similar school-based interventions. PMID:21721969

The Role of Attention in Somatosensory Processing: A Multi-Trait, Multi-Method Analysis

ERIC Educational Resources Information Center

Wodka, Ericka L.; Puts, Nicolaas A. J.; Mahone, E. Mark; Edden, Richard A. E.; Tommerdahl, Mark; Mostofsky, Stewart H.

2016-01-01

Sensory processing abnormalities in autism have largely been described by parent report. This study used a multi-method (parent-report and measurement), multi-trait (tactile sensitivity and attention) design to evaluate somatosensory processing in ASD. Results showed multiple significant within-method (e.g., parent report of different…

[Image processing system of visual prostheses based on digital signal processor DM642].

PubMed

Xie, Chengcheng; Lu, Yanyu; Gu, Yun; Wang, Jing; Chai, Xinyu

2011-09-01

This paper employed a DSP platform to create the real-time and portable image processing system, and introduced a series of commonly used algorithms for visual prostheses. The results of performance evaluation revealed that this platform could afford image processing algorithms to be executed in real time.

Effect of pilot-scale aseptic processing on tomato soup quality parameters.

PubMed

Colle, Ines J P; Andrys, Anna; Grundelius, Andrea; Lemmens, Lien; Löfgren, Anders; Buggenhout, Sandy Van; Loey, Ann; Hendrickx, Marc Van

2011-01-01

Tomatoes are often processed into shelf-stable products. However, the different processing steps might have an impact on the product quality. In this study, a model tomato soup was prepared and the impact of pilot-scale aseptic processing, including heat treatment and high-pressure homogenization, on some selected quality parameters was evaluated. The vitamin C content, the lycopene isomer content, and the lycopene bioaccessibility were considered as health-promoting attributes. As a structural characteristic, the viscosity of the tomato soup was investigated. A tomato soup without oil as well as a tomato soup containing 5% olive oil were evaluated. Thermal processing had a negative effect on the vitamin C content, while lycopene degradation was limited. For both compounds, high-pressure homogenization caused additional losses. High-pressure homogenization also resulted in a higher viscosity that was accompanied by a decrease in lycopene bioaccessibility. The presence of lipids clearly enhanced the lycopene isomerization susceptibility and improved the bioaccessibility. The results obtained in this study are of relevance for product formulation and process design of tomato-based food products. © 2011 Institute of Food Technologists®

Structural changes evaluation with Raman spectroscopy in meat batters prepared by different processes.

PubMed

Kang, Zhuang-Li; Li, Xiang; He, Hong-Ju; Ma, Han-Jun; Song, Zhao-Jun

2017-08-01

A comprehensive study was conducted to evaluate the structural changes of meat and protein of pork batters produced by chopping or beating process through the phase-contrast micrograph, laser light scattering analyzer, scanning electronic microscopy and Raman spectrometer. The results showed that the shattered myofibrilla fragments were shorter and particle-sizes were smaller in the raw batter produced by beating process than those in the chopping process. Compared with the raw and cooked batters produced by chopping process, modifications in amide I and amide III bands revealed a significant decrease of α -helix content and an increase of β -sheet, β -turn and random coils content in the beating process. The changes in secondary structure of protein in the batter produced by beating process was thermally stable. Moreover, more tyrosine residues were buried, and more gauche-gauche-trans disulfide bonds conformations and hydrophobic interactions were formed in the batter produced by beating process.

Academic/State/Federal collaborations and the improvement of practices in disaster mental health services and evaluation.

PubMed

Watson, Patricia J; Ruzek, Josef I

2009-05-01

Academic, state, and federal agencies collaborated over the last 9 years to improve disaster mental health services and evaluation. This process, which included literature reviews, a number of expert panels, and case studies, is described. The products resulting from this process have included the development of a systematic cross-site evaluation of the federally funded crisis counseling program and field guides for interventions aimed at providing services to distressed individuals in the immediate aftermath of disasters and to individuals needing resilience skills training weeks or months after the event. Future improvement of disaster mental health services calls for continued research, evaluation, training, and intervention development.

Undergraduate medical education programme renewal: a longitudinal context, input, process and product evaluation study.

PubMed

Mirzazadeh, Azim; Gandomkar, Roghayeh; Hejri, Sara Mortaz; Hassanzadeh, Gholamreza; Koochak, Hamid Emadi; Golestani, Abolfazl; Jafarian, Ali; Jalili, Mohammad; Nayeri, Fatemeh; Saleh, Narges; Shahi, Farhad; Razavi, Seyed Hasan Emami

2016-02-01

The purpose of this study was to utilize the Context, Input, Process and Product (CIPP) evaluation model as a comprehensive framework to guide initiating, planning, implementing and evaluating a revised undergraduate medical education programme. The eight-year longitudinal evaluation study consisted of four phases compatible with the four components of the CIPP model. In the first phase, we explored the strengths and weaknesses of the traditional programme as well as contextual needs, assets, and resources. For the second phase, we proposed a model for the programme considering contextual features. During the process phase, we provided formative information for revisions and adjustments. Finally, in the fourth phase, we evaluated the outcomes of the new undergraduate medical education programme in the basic sciences phase. Information was collected from different sources such as medical students, faculty members, administrators, and graduates, using various qualitative and quantitative methods including focus groups, questionnaires, and performance measures. The CIPP model has the potential to guide policy makers to systematically collect evaluation data and to manage stakeholders' reactions at each stage of the reform in order to make informed decisions. However, the model may result in evaluation burden and fail to address some unplanned evaluation questions.

Evaluating the compatibility of multi-functional and intensive urban land uses

NASA Astrophysics Data System (ADS)

Taleai, M.; Sharifi, A.; Sliuzas, R.; Mesgari, M.

2007-12-01

This research is aimed at developing a model for assessing land use compatibility in densely built-up urban areas. In this process, a new model was developed through the combination of a suite of existing methods and tools: geographical information system, Delphi methods and spatial decision support tools: namely multi-criteria evaluation analysis, analytical hierarchy process and ordered weighted average method. The developed model has the potential to calculate land use compatibility in both horizontal and vertical directions. Furthermore, the compatibility between the use of each floor in a building and its neighboring land uses can be evaluated. The method was tested in a built-up urban area located in Tehran, the capital city of Iran. The results show that the model is robust in clarifying different levels of physical compatibility between neighboring land uses. This paper describes the various steps and processes of developing the proposed land use compatibility evaluation model (CEM).

Dysphoria and children's processing of supportive interactions.

PubMed

Shirk, S R; Van Horn, M; Leber, D

1997-06-01

This study examined the processing of supportive interactions by dysphoric and nondysphoric preteens and early adolescents. Seventy-two youngsters between the ages of 10 and 13 evaluated the supportiveness and helpfulness of standardized, videotaped interactions between a distressed preadolescent and a maternal figure. The tape presentations varied in terms of the level of depicted maternal support and instructional condition (degree of self-reference). The results indicated that dysphoric youngsters evaluated both the supportiveness and helpfulness of interactions less positively than nondysphoric agemates. Group differences in support evaluations were most pronounced in the self-referenced condition. The level of depicted support did not affect processing differences. Dysphoric subjects reported lower levels of emotional support in prior relationships and a greater tendency to view supportive behavior as ingenuine than nondysphoric peers. Variation in prior support experiences accounted for group differences in the evaluation of the supportiveness of new interactions.

Evaluation and selection of open-source EMR software packages based on integrated AHP and TOPSIS.

PubMed

Zaidan, A A; Zaidan, B B; Al-Haiqi, Ahmed; Kiah, M L M; Hussain, Muzammil; Abdulnabi, Mohamed

2015-02-01

Evaluating and selecting software packages that meet the requirements of an organization are difficult aspects of software engineering process. Selecting the wrong open-source EMR software package can be costly and may adversely affect business processes and functioning of the organization. This study aims to evaluate and select open-source EMR software packages based on multi-criteria decision-making. A hands-on study was performed and a set of open-source EMR software packages were implemented locally on separate virtual machines to examine the systems more closely. Several measures as evaluation basis were specified, and the systems were selected based a set of metric outcomes using Integrated Analytic Hierarchy Process (AHP) and TOPSIS. The experimental results showed that GNUmed and OpenEMR software can provide better basis on ranking score records than other open-source EMR software packages. Copyright © 2014 Elsevier Inc. All rights reserved.

Attitudes to the right- and left: frontal ERP asymmetries associated with stimulus valence and processing goals.

PubMed

Cunningham, William A; Espinet, Stacey D; DeYoung, Colin G; Zelazo, Philip David

2005-12-01

We used dense-array event-related potentials (ERP) to examine the time course and neural bases of evaluative processing. Participants made good vs. bad (evaluative) and abstract vs. concrete (nonevaluative) judgments of socially relevant concepts (e.g., "murder," "welfare"), and then rated all concepts for goodness and badness. Results revealed a late positive potential (LPP) beginning at about 475 ms post-stimulus and maximal over anterior sites. The LPP was lateralized (higher amplitude and shorter latency) on the right for concepts later rated bad, and on the left for concepts later rated good. Moreover, the degree of lateralization for the amplitude but not the latency was larger when participants were making evaluative judgments than when they were making nonevaluative judgments. These data are consistent with a model in which discrete regions of prefrontal cortex (PFC) are specialized for the evaluative processing of positive and negative stimuli.

ELECTROCHEMICAL REMEDIATION TECHNOLOGIES (ECRTS) - IN SITU REMEDIATION OF CONTAMINATED MARINE SEDIMENTS

EPA Science Inventory

This Innovative Technology Evaulation Report summarizes the results of the evaluation of the Electrochemical Remediation Technologies (ECRTs) process, developed by P2-Soil Remediation, Inc. (in partnership with Weiss Associates and Electro-Petroleum, Inc.). This evaluation was co...

Generic experimental design for product strategy evaluation : crumb rubber modified materials.

DOT National Transportation Integrated Search

2005-02-01

This report presents the framework for a generic process to evaluate new products and/or strategies for possible use within Caltrans. The framework is the result of a collaborative effort among Caltrans, the University of California Partnered Pavemen...

Neural mechanisms underlying urgent and evaluative behaviors: An fMRI study on the interaction of automatic and controlled processes.

PubMed

Megías, Alberto; Navas, Juan Francisco; Petrova, Dafina; Cándido, Antonio; Maldonado, Antonio; Garcia-Retamero, Rocio; Catena, Andrés

2015-08-01

Dual-process theories have dominated the study of risk perception and risk-taking over the last two decades. However, there is a lack of objective brain-level evidence supporting the two systems of processing in every-day risky behavior. To address this issue, we propose the dissociation between evaluative and urgent behaviors as evidence of dual processing in risky driving situations. Our findings show a dissociation of evaluative and urgent behavior both at the behavioral and neural level. fMRI data showed an increase of activation in areas implicated in motor programming, emotional processing, and visuomotor integration in urgent behavior compared to evaluative behavior. These results support a more automatic processing of risk in urgent tasks, relying mainly on heuristics and experiential appraisal. The urgent task, which is characterized by strong time pressure and the possibility for negative consequences among others factors, creates a suitable context for the experiential-affective system to guide the decision-making process. Moreover, we observed greater frontal activation in the urgent task, suggesting the participation of cognitive control in safe behaviors. The findings of this research are relevant for the study of the neural mechanisms underlying dual process models in risky perception and decision-making, especially because of their proximity to everyday activities. © 2015 Wiley Periodicals, Inc.

The Improvement of the Closed Bounded Volume (CBV) Evaluation Methods to Compute a Feasible Rough Machining Area Based on Faceted Models

NASA Astrophysics Data System (ADS)

Hadi Sutrisno, Himawan; Kiswanto, Gandjar; Istiyanto, Jos

2017-06-01

The rough machining is aimed at shaping a workpiece towards to its final form. This process takes up a big proportion of the machining time due to the removal of the bulk material which may affect the total machining time. In certain models, the rough machining has limitations especially on certain surfaces such as turbine blade and impeller. CBV evaluation is one of the concepts which is used to detect of areas admissible in the process of machining. While in the previous research, CBV area detection used a pair of normal vectors, in this research, the writer simplified the process to detect CBV area with a slicing line for each point cloud formed. The simulation resulted in three steps used for this method and they are: 1. Triangulation from CAD design models, 2. Development of CC point from the point cloud, 3. The slicing line method which is used to evaluate each point cloud position (under CBV and outer CBV). The result of this evaluation method can be used as a tool for orientation set-up on each CC point position of feasible areas in rough machining.

The influence of manufacturing processes on the microstructure, grain boundary characteristics and SCC behavior of Alloy 690 steam generator tubing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sarver, J.M.; Doherty, P.E.; Doyle, D.M.

1995-12-31

Thermally treated Alloy 690 is the tubing material of choice for replacement steam generators in the United States. Throughout the world, it is manufactured using different melting and thermomechanical processing methods. The influence of different processing steps on the intergranular stress corrosion cracking (IGSCC) behavior of Alloy 690 has not been thoroughly evaluated. Evaluations were performed on Alloy 690 steam generator tubing produced using several different melting practices and thermomechanical processing procedures. The evaluations included extensive microstructural examinations as well as constant extension rate (CERT) tests. The CERT test results indicated that the thermally treated Alloy 690 tubing which wasmore » subjected to higher annealing temperatures displayed the highest degree of resistance to stress corrosion cracking (SCC). Examination of the microstructures indicated that the microstructural changes which are produced by increased annealing temperatures are subtle. In an attempt to further elucidate and quantify the effect of manufacturing processes on corrosion behavior, grain boundary character distribution (GBCD) measurements were performed on the same materials which were CERT tested. Analysis of GBCDs of the samples used in this study indicate that Alloy 690 exhibits a significantly larger fraction of special boundaries as compared to Alloy 600 and Alloy 800, regardless of the processing history of the tubing. Preliminary results indicate that a correlation may exist between processing method, GBCD`s and degree of IGSCC exhibited by the thermally treated samples examined in this study.« less

Dogs cannot bark: event-related brain responses to true and false negated statements as indicators of higher-order conscious processing.

PubMed

Herbert, Cornelia; Kübler, Andrea

2011-01-01

The present study investigated event-related brain potentials elicited by true and false negated statements to evaluate if discrimination of the truth value of negated information relies on conscious processing and requires higher-order cognitive processing in healthy subjects across different levels of stimulus complexity. The stimulus material consisted of true and false negated sentences (sentence level) and prime-target expressions (word level). Stimuli were presented acoustically and no overt behavioral response of the participants was required. Event-related brain potentials to target words preceded by true and false negated expressions were analyzed both within group and at the single subject level. Across the different processing conditions (word pairs and sentences), target words elicited a frontal negativity and a late positivity in the time window from 600-1000 msec post target word onset. Amplitudes of both brain potentials varied as a function of the truth value of the negated expressions. Results were confirmed at the single-subject level. In sum, our results support recent suggestions according to which evaluation of the truth value of a negated expression is a time- and cognitively demanding process that cannot be solved automatically, and thus requires conscious processing. Our paradigm provides insight into higher-order processing related to language comprehension and reasoning in healthy subjects. Future studies are needed to evaluate if our paradigm also proves sensitive for the detection of consciousness in non-responsive patients.

Developing Image Processing Meta-Algorithms with Data Mining of Multiple Metrics

PubMed Central

Cunha, Alexandre; Toga, A. W.; Parker, D. Stott

2014-01-01

People often use multiple metrics in image processing, but here we take a novel approach of mining the values of batteries of metrics on image processing results. We present a case for extending image processing methods to incorporate automated mining of multiple image metric values. Here by a metric we mean any image similarity or distance measure, and in this paper we consider intensity-based and statistical image measures and focus on registration as an image processing problem. We show how it is possible to develop meta-algorithms that evaluate different image processing results with a number of different metrics and mine the results in an automated fashion so as to select the best results. We show that the mining of multiple metrics offers a variety of potential benefits for many image processing problems, including improved robustness and validation. PMID:24653748

Analysis of the times involved in processing and communication in a lower limb simulation system controlled by SEMG

NASA Astrophysics Data System (ADS)

Profumieri, A.; Bonell, C.; Catalfamo, P.; Cherniz, A.

2016-04-01

Virtual reality has been proposed for different applications, including the evaluation of new control strategies and training protocols for upper limb prostheses and for the study of new rehabilitation programs. In this study, a lower limb simulation environment commanded by surface electromyography signals is evaluated. The time delays generated by the acquisition and processing stages for the signals that would command the knee joint, were measured and different acquisition windows were analysed. The subjective perception of the quality of simulation was also evaluated when extra delays were added to the process. The results showed that the acquisition window is responsible for the longest delay. Also, the basic implemented processes allowed for the acquisition of three signal channels for commanding the simulation. Finally, the communication between different applications is arguably efficient, although it depends on the amount of data to be sent.

Evaluation of hydrolysis-esterification biodiesel production from wet microalgae.

PubMed

Song, Chunfeng; Liu, Qingling; Ji, Na; Deng, Shuai; Zhao, Jun; Li, Shuhong; Kitamura, Yutaka

2016-08-01

Wet microalgae hydrolysis-esterification route has the advantage to avoid the energy-intensive units (e.g. drying and lipid extraction) in the biodiesel production process. In this study, techno-economic evaluation of hydrolysis-esterification biodiesel production process was carried out and compared with conventional (usually including drying, lipid extraction, esterification and transesterification) biodiesel production process. Energy and material balance of the conventional and hydrolysis-esterification processes was evaluated by Aspen Plus. The simulation results indicated that drying (2.36MJ/L biodiesel) and triolein transesterification (1.89MJ/L biodiesel) are the dominant energy-intensive stages in the conventional route (5.42MJ/L biodiesel). By contrast, the total energy consumption of hydrolysis-esterification route can be reduced to 1.81MJ/L biodiesel, and approximately 3.61MJ can be saved to produce per liter biodiesel. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Dutch Review Process for Evaluating the Quality of Psychological Tests: History, Procedure, and Results

ERIC Educational Resources Information Center

Evers, Arne; Sijtsma, Klaas; Lucassen, Wouter; Meijer, Rob R.

2010-01-01

This article describes the 2009 revision of the Dutch Rating System for Test Quality and presents the results of test ratings from almost 30 years. The rating system evaluates the quality of a test on seven criteria: theoretical basis, quality of the testing materials, comprehensiveness of the manual, norms, reliability, construct validity, and…

Evaluation of Disaster Preparedness Based on Simulation Exercises: A Comparison of Two Models.

PubMed

Rüter, Andres; Kurland, Lisa; Gryth, Dan; Murphy, Jason; Rådestad, Monica; Djalali, Ahmadreza

2016-08-01

The objective of this study was to highlight 2 models, the Hospital Incident Command System (HICS) and the Disaster Management Indicator model (DiMI), for evaluating the in-hospital management of a disaster situation through simulation exercises. Two disaster exercises, A and B, with similar scenarios were performed. Both exercises were evaluated with regard to actions, processes, and structures. After the exercises, the results were calculated and compared. In exercise A the HICS model indicated that 32% of the required positions for the immediate phase were taken under consideration with an average performance of 70%. For exercise B, the corresponding scores were 42% and 68%, respectively. According to the DiMI model, the results for exercise A were a score of 68% for management processes and 63% for management structure (staff skills). In B the results were 77% and 86%, respectively. Both models demonstrated acceptable results in relation to previous studies. More research in this area is needed to validate which of these methods best evaluates disaster preparedness based on simulation exercises or whether the methods are complementary and should therefore be used together. (Disaster Med Public Health Preparedness. 2016;10:544-548).

Will they like me? Neural and behavioral responses to social-evaluative peer feedback in socially and non-socially anxious females.

PubMed

van der Molen, Melle J W; Harrewijn, Anita; Westenberg, P Michiel

2018-05-01

The current study examined neural and behavioral responses to social-evaluative feedback processing in social anxiety. Twenty-two non-socially and 17 socially anxious females (mean age = 19.57 years) participated in a Social Judgment Paradigm in which they received peer acceptance/rejection feedback that was either congruent or incongruent with their prior predictions. Results indicated that socially anxious participants believed they would receive less social acceptance feedback than non-socially anxious participants. EEG results demonstrated that unexpected social rejection feedback elicited a significant increase in theta (4-8 Hz) power relative to other feedback conditions. This theta response was only observed in non-socially anxious individuals. Together, results corroborate cognitive-behavioral studies demonstrating a negative expectancy bias in socially anxiety with respect to social evaluation. Furthermore, the present findings highlight a functional role for theta oscillatory dynamics in processing cues that convey social-evaluative threat, and this social threat-monitoring mechanism seems less sensitive in socially anxious females. Copyright © 2018 Elsevier B.V. All rights reserved.

An artifacts removal post-processing for epiphyseal region-of-interest (EROI) localization in automated bone age assessment (BAA)

PubMed Central

2011-01-01

Background Segmentation is the most crucial part in the computer-aided bone age assessment. A well-known type of segmentation performed in the system is adaptive segmentation. While providing better result than global thresholding method, the adaptive segmentation produces a lot of unwanted noise that could affect the latter process of epiphysis extraction. Methods A proposed method with anisotropic diffusion as pre-processing and a novel Bounded Area Elimination (BAE) post-processing algorithm to improve the algorithm of ossification site localization technique are designed with the intent of improving the adaptive segmentation result and the region-of interest (ROI) localization accuracy. Results The results are then evaluated by quantitative analysis and qualitative analysis using texture feature evaluation. The result indicates that the image homogeneity after anisotropic diffusion has improved averagely on each age group for 17.59%. Results of experiments showed that the smoothness has been improved averagely 35% after BAE algorithm and the improvement of ROI localization has improved for averagely 8.19%. The MSSIM has improved averagely 10.49% after performing the BAE algorithm on the adaptive segmented hand radiograph. Conclusions The result indicated that hand radiographs which have undergone anisotropic diffusion have greatly reduced the noise in the segmented image and the result as well indicated that the BAE algorithm proposed is capable of removing the artifacts generated in adaptive segmentation. PMID:21952080

Spectral OCT with speckle contrast reduction for evaluation of the healing process after PRK and transepithelial PRK

PubMed Central

Kaluzny, Bartlomiej J.; Szkulmowski, Maciej; Bukowska, Danuta M.; Wojtkowski, Maciej

2014-01-01

We evaluate Spectral OCT (SOCT) with a speckle contrast reduction technique using resonant scanner for assessment of corneal surface changes after excimer laser photorefractive keratectomy (PRK) and we compare healing process between conventional PRK and transepithelial PRK. The measurements were performed before and after the surgery. Obtained results show that SOCT with a resonant scanner speckle contrast reduction is capable of providing information regarding the healing process after PRK. The main difference between the healing processes of PRK and TransPRK, assessed by SOCT, was the time to cover the stroma with epithelium, which was shorter in the TransPRK group. PMID:24761291

Student Analysis of Handout Development based on Guided Discovery Method in Process Evaluation and Learning Outcomes of Biology

NASA Astrophysics Data System (ADS)

Nerita, S.; Maizeli, A.; Afza, A.

2017-09-01

Process Evaluation and Learning Outcomes of Biology subjects discusses the evaluation process in learning and application of designed and processed learning outcomes. Some problems found during this subject was the student difficult to understand the subject and the subject unavailability of learning resources that can guide and make students independent study. So, it necessary to develop a learning resource that can make active students to think and to make decisions with the guidance of the lecturer. The purpose of this study is to produce handout based on guided discovery method that match the needs of students. The research was done by using 4-D models and limited to define phase that is student requirement analysis. Data obtained from the questionnaire and analyzed descriptively. The results showed that the average requirement of students was 91,43%. Can be concluded that students need a handout based on guided discovery method in the learning process.

Evaluation of phase separator number in hydrodesulfurization (HDS) unit

NASA Astrophysics Data System (ADS)

Jayanti, A. D.; Indarto, A.

2016-11-01

The removal process of acid gases such as H2S in natural gas processing industry is required in order to meet sales gas specification. Hydrodesulfurization (HDS)is one of the processes in the refinery that is dedicated to reduce sulphur.InHDS unit, phase separator plays important role to remove H2S from hydrocarbons, operated at a certain pressure and temperature. Optimization of the number of separator performed on the system is then evaluated to understand the performance and economics. From the evaluation, it shows that all systems were able to meet the specifications of H2S in the desired product. However, one separator system resulted the highest capital and operational costs. The process of H2S removal with two separator systems showed the best performance in terms of both energy efficiency with the lowest capital and operating cost. The two separator system is then recommended as a reference in the HDS unit to process the removal of H2S from natural gas.

Statistically significant performance results of a mine detector and fusion algorithm from an x-band high-resolution SAR

NASA Astrophysics Data System (ADS)

Williams, Arnold C.; Pachowicz, Peter W.

2004-09-01

Current mine detection research indicates that no single sensor or single look from a sensor will detect mines/minefields in a real-time manner at a performance level suitable for a forward maneuver unit. Hence, the integrated development of detectors and fusion algorithms are of primary importance. A problem in this development process has been the evaluation of these algorithms with relatively small data sets, leading to anecdotal and frequently over trained results. These anecdotal results are often unreliable and conflicting among various sensors and algorithms. Consequently, the physical phenomena that ought to be exploited and the performance benefits of this exploitation are often ambiguous. The Army RDECOM CERDEC Night Vision Laboratory and Electron Sensors Directorate has collected large amounts of multisensor data such that statistically significant evaluations of detection and fusion algorithms can be obtained. Even with these large data sets care must be taken in algorithm design and data processing to achieve statistically significant performance results for combined detectors and fusion algorithms. This paper discusses statistically significant detection and combined multilook fusion results for the Ellipse Detector (ED) and the Piecewise Level Fusion Algorithm (PLFA). These statistically significant performance results are characterized by ROC curves that have been obtained through processing this multilook data for the high resolution SAR data of the Veridian X-Band radar. We discuss the implications of these results on mine detection and the importance of statistical significance, sample size, ground truth, and algorithm design in performance evaluation.

Information Fusion for Feature Extraction and the Development of Geospatial Information

DTIC Science & Technology

2004-07-01

of automated processing . 2. Requirements for Geospatial Information Accurate, timely geospatial information is critical for many military...this evaluation illustrates some of the difficulties in comparing manual and automated processing results (figure 5). The automated delineation of

New decision-making processes for the pricing of health technologies in Japan: The FY 2016/2017 pilot phase for the introduction of economic evaluations.

PubMed

Shiroiwa, Takeru; Fukuda, Takashi; Ikeda, Shunya; Takura, Tomoyuki

2017-08-01

Economic evaluation is used for decision-making processes in healthcare technologies in many developed countries. In Japan, no health economic data have been requested for drugs, medical devices, and interventions till date. However, economic evaluation is gradually gaining importance, and a trial implementation of the cost-effectiveness evaluation of drugs and medical devices has begun. Discussions on economic evaluation began in May 2012 within a newly established sub-committee of the Chuikyo, referred to as the "Special Committee on Cost Effectiveness." After four years of discussions, this committee determined that during the trial implementation, the results of the cost-effectiveness evaluation would be used for the re-pricing of drugs and medical devices at the end of fiscal year (FY) 2017. Chuikyo selected 13 products (7 drugs and 6 medical devices) as targets for this evaluation. These products will be evaluated until the end of FY 2017 based on the following process: manufacturers will submit the data of economic evaluation; the National Institute of Public Health will coordinate the review process; academic groups will perform the actual review of the submitted data, and the expert committee will appraise these data. This represents the first step to introducing cost-effectiveness analysis in the Japanese healthcare system. We believe that these efforts will contribute to the efficiency and sustainability of the Japanese healthcare system. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

Analytical methods to characterize heterogeneous raw material for thermal spray process: cored wire Inconel 625

NASA Astrophysics Data System (ADS)

Lindner, T.; Bonebeau, S.; Drehmann, R.; Grund, T.; Pawlowski, L.; Lampke, T.

2016-03-01

In wire arc spraying, the raw material needs to exhibit sufficient formability and ductility in order to be processed. By using an electrically conductive, metallic sheath, it is also possible to handle non-conductive and/or brittle materials such as ceramics. In comparison to massive wire, a cored wire has a heterogeneous material distribution. Due to this fact and the complex thermodynamic processes during wire arc spraying, it is very difficult to predict the resulting chemical composition in the coating with sufficient accuracy. An Inconel 625 cored wire was used to investigate this issue. In a comparative study, the analytical results of the raw material were compared to arc sprayed coatings and droplets, which were remelted in an arc furnace under argon atmosphere. Energy-dispersive X-ray spectroscopy (EDX) and X-ray fluorescence (XRF) analysis were used to determine the chemical composition. The phase determination was performed by X-ray diffraction (XRD). The results were related to the manufacturer specifications and evaluated in respect to differences in the chemical composition. The comparison between the feedstock powder, the remelted droplets and the thermally sprayed coatings allows to evaluate the influence of the processing methods on the resulting chemical and phase composition.

Optimization of a RF-generated CF4/O2 gas plasma sterilization process.

PubMed

Lassen, Klaus S; Nordby, Bolette; Grün, Reinar

2003-05-15

A sterilization process with the use of RF-generated (13.56 MHz) CF(4)/O(2) gas plasma was optimized in regards to power, flow rate, exposure time, and RF-system type. The dependency of the sporicidal effect on the spore inoculum positioning in the chamber of the RF systems was also investigated. Dried Bacillus stearothermophilus ATCC 7953 endospores were used as test organisms. The treatments were evaluated on the basis of survival curves and corresponding D values. The only parameter found to affect the sterilization process was the power of the RF system. Higher power resulted in higher kill. Finally, when the samples were placed more than 3-8 cm away from a centrally placed electrode in System 2, the sporicidal effect was reduced. The results are discussed and compared to results from the present literature. The RF excitation source is evaluated to be more appropriate for sterilization processes than the MW source. Copyright 2003 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 65B: 239-244, 2003

Assessing the environmental impact of energy production from hydrochar generated via hydrothermal carbonization of food wastes.

PubMed

Berge, Nicole D; Li, Liang; Flora, Joseph R V; Ro, Kyoung S

2015-09-01

Although there are numerous studies suggesting hydrothermal carbonization is an environmentally advantageous process for transformation of wastes to value-added products, a systems level evaluation of the environmental impacts associated with hydrothermal carbonization and subsequent hydrochar combustion has not been conducted. The specific objectives of this work are to use a life cycle assessment approach to evaluate the environmental impacts associated with the HTC of food wastes and the subsequent combustion of the generated solid product (hydrochar) for energy production, and to understand how parameters and/or components associated with food waste carbonization and subsequent hydrochar combustion influence system environmental impact. Results from this analysis indicate that HTC process water emissions and hydrochar combustion most significantly influence system environmental impact, with a net negative GWP impact resulting for all evaluated substituted energy-sources except biomass. These results illustrate the importance of electricity production from hydrochar particularly when it is used to offset coal-based energy sources. HTC process water emissions result in a net impact to the environment, indicating a need for developing appropriate management strategies. Results from this analysis also highlight a need for additional exploration of liquid and gas-phase composition, a better understanding of how changes in carbonization conditions (e.g., reaction time and temperature) influence metal and nutrient fate, and the exploration of liquid-phase treatment. Copyright © 2015 Elsevier Ltd. All rights reserved.

Study design considerations in evaluating environmental impacts

Treesearch

Stan T. Lebow; Paul A. Cooper; Patricia Lebow

2006-01-01

The purpose of this chapter is to make the reader aware of how choices in study parameters may influence the outcome of treated-wood environmental impact evaluations. Evaluation of the leaching and environmental accumulation of preservatives from treated wood is a complex process. and many factors can influence the results of such studies. In laboratory studies, the...

A Qualitative Approach to the Evaluation of Expert Systems Shells.

ERIC Educational Resources Information Center

Slawson, Dean A.; And Others

This study explores an approach to the evaluation of expert system shells using case studies. The methodology and some of the results of an evaluation of the prototype development of an expert system using the shell "M1" are detailed, including a description of the participants and the project, the data collection process and materials,…

Application of electrochemical peroxidation (ECP) process for waste-activated sludge stabilization and system optimization using response surface methodology (RSM).

PubMed

Gholikandi, Gagik Badalians; Kazemirad, Khashayar

2018-03-01

In this study, the performance of the electrochemical peroxidation (ECP) process for removing the volatile suspended solids (VSS) content of waste-activated sludge was evaluated. The Fe 2+ ions required by the process were obtained directly from iron electrodes in the system. The performance of the ECP process was investigated in various operational conditions employing a laboratory-scale pilot setup and optimized by response surface methodology (RSM). According to the results, the ECP process showed its best performance when the pH value, current density, H 2 O 2 concentration and the retention time were 3, 3.2 mA/cm 2 , 1,535 mg/L and 240 min, respectively. In these conditions, the introduced Fe 2+ concentration was approximately 500 (mg/L) and the VSS removal efficiency about 74%. Moreover, the results of the microbial characteristics of the raw and the stabilized sludge demonstrated that the ECP process is able to remove close to 99.9% of the coliforms in the raw sludge during the stabilization process. The energy consumption evaluation showed that the required energy of the ECP reactor (about 1.8-2.5 kWh (kg VSS removed) -1 ) is considerably lower than for aerobic digestion, the conventional waste-activated sludge stabilization method (about 2-3 kWh (kg VSS removed) -1 ). The RSM optimization process showed that the best operational conditions of the ECP process comply with the experimental results, and the actual and the predicted results are in good conformity with each other. This feature makes it possible to predict the introduced Fe 2+ concentrations into the system and the VSS removal efficiency of the process precisely.

Cognitive and social processes predicting partner psychological adaptation to early stage breast cancer.

PubMed

Manne, Sharon; Ostroff, Jamie; Fox, Kevin; Grana, Generosa; Winkel, Gary

2009-02-01

The diagnosis and subsequent treatment for early stage breast cancer is stressful for partners. Little is known about the role of cognitive and social processes predicting the longitudinal course of partners' psychosocial adaptation. This study evaluated the role of cognitive and social processing in partner psychological adaptation to early stage breast cancer, evaluating both main and moderator effect models. Moderating effects for meaning making, acceptance, and positive reappraisal on the predictive association of searching for meaning, emotional processing, and emotional expression on partner psychological distress were examined. Partners of women diagnosed with early stage breast cancer were evaluated shortly after the ill partner's diagnosis (N=253), 9 (N=167), and 18 months (N=149) later. Partners completed measures of emotional expression, emotional processing, acceptance, meaning making, and general and cancer-specific distress at all time points. Lower satisfaction with partner support predicted greater global distress, and greater use of positive reappraisal was associated with greater distress. The predicted moderator effects for found meaning on the associations between the search for meaning and cancer-specific distress were found and similar moderating effects for positive reappraisal on the associations between emotional expression and global distress and for acceptance on the association between emotional processing and cancer-specific distress were found. Results indicate several cognitive-social processes directly predict partner distress. However, moderator effect models in which the effects of partners' processing depends upon whether these efforts result in changes in perceptions of the cancer experience may add to the understanding of partners' adaptation to cancer.

Technique for Determination of Rational Boundaries in Combining Construction and Installation Processes Based on Quantitative Estimation of Technological Connections

NASA Astrophysics Data System (ADS)

Gusev, E. V.; Mukhametzyanov, Z. R.; Razyapov, R. V.

2017-11-01

The problems of the existing methods for the determination of combining and technologically interlinked construction processes and activities are considered under the modern construction conditions of various facilities. The necessity to identify common parameters that characterize the interaction nature of all the technology-related construction and installation processes and activities is shown. The research of the technologies of construction and installation processes for buildings and structures with the goal of determining a common parameter for evaluating the relationship between technologically interconnected processes and construction works are conducted. The result of this research was to identify the quantitative evaluation of interaction construction and installation processes and activities in a minimum technologically necessary volume of the previous process allowing one to plan and organize the execution of a subsequent technologically interconnected process. The quantitative evaluation is used as the basis for the calculation of the optimum range of the combination of processes and activities. The calculation method is based on the use of the graph theory. The authors applied a generic characterization parameter to reveal the technological links between construction and installation processes, and the proposed technique has adaptive properties which are key for wide use in organizational decisions forming. The article provides a written practical significance of the developed technique.

Protocol for process evaluation of a randomised controlled trial of family-led rehabilitation post stroke (ATTEND) in India.

PubMed

Liu, Hueiming; Lindley, Richard; Alim, Mohammed; Felix, Cynthia; Gandhi, Dorcas B C; Verma, Shweta J; Tugnawat, Deepak Kumar; Syrigapu, Anuradha; Ramamurthy, Ramaprabhu Krishnappa; Pandian, Jeyaraj D; Walker, Marion; Forster, Anne; Anderson, Craig S; Langhorne, Peter; Murthy, Gudlavalleti Venkata Satyanarayana; Shamanna, Bindiganavale Ramaswamy; Hackett, Maree L; Maulik, Pallab K; Harvey, Lisa A; Jan, Stephen

2016-09-15

We are undertaking a randomised controlled trial (fAmily led rehabiliTaTion aftEr stroke in INDia, ATTEND) evaluating training a family carer to enable maximal rehabilitation of patients with stroke-related disability; as a potentially affordable, culturally acceptable and effective intervention for use in India. A process evaluation is needed to understand how and why this complex intervention may be effective, and to capture important barriers and facilitators to its implementation. We describe the protocol for our process evaluation to encourage the development of in-process evaluation methodology and transparency in reporting. The realist and RE-AIM (Reach, Effectiveness, Adoption, Implementation and Maintenance) frameworks informed the design. Mixed methods include semistructured interviews with health providers, patients and their carers, analysis of quantitative process data describing fidelity and dose of intervention, observations of trial set up and implementation, and the analysis of the cost data from the patients and their families perspective and programme budgets. These qualitative and quantitative data will be analysed iteratively prior to knowing the quantitative outcomes of the trial, and then triangulated with the results from the primary outcome evaluation. The process evaluation has received ethical approval for all sites in India. In low-income and middle-income countries, the available human capital can form an approach to reducing the evidence practice gap, compared with the high cost alternatives available in established market economies. This process evaluation will provide insights into how such a programme can be implemented in practice and brought to scale. Through local stakeholder engagement and dissemination of findings globally we hope to build on patient-centred, cost-effective and sustainable models of stroke rehabilitation. CTRI/2013/04/003557. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Learning Evaluation: blending quality improvement and implementation research methods to study healthcare innovations.

PubMed

Balasubramanian, Bijal A; Cohen, Deborah J; Davis, Melinda M; Gunn, Rose; Dickinson, L Miriam; Miller, William L; Crabtree, Benjamin F; Stange, Kurt C

2015-03-10

In healthcare change interventions, on-the-ground learning about the implementation process is often lost because of a primary focus on outcome improvements. This paper describes the Learning Evaluation, a methodological approach that blends quality improvement and implementation research methods to study healthcare innovations. Learning Evaluation is an approach to multi-organization assessment. Qualitative and quantitative data are collected to conduct real-time assessment of implementation processes while also assessing changes in context, facilitating quality improvement using run charts and audit and feedback, and generating transportable lessons. Five principles are the foundation of this approach: (1) gather data to describe changes made by healthcare organizations and how changes are implemented; (2) collect process and outcome data relevant to healthcare organizations and to the research team; (3) assess multi-level contextual factors that affect implementation, process, outcome, and transportability; (4) assist healthcare organizations in using data for continuous quality improvement; and (5) operationalize common measurement strategies to generate transportable results. Learning Evaluation principles are applied across organizations by the following: (1) establishing a detailed understanding of the baseline implementation plan; (2) identifying target populations and tracking relevant process measures; (3) collecting and analyzing real-time quantitative and qualitative data on important contextual factors; (4) synthesizing data and emerging findings and sharing with stakeholders on an ongoing basis; and (5) harmonizing and fostering learning from process and outcome data. Application to a multi-site program focused on primary care and behavioral health integration shows the feasibility and utility of Learning Evaluation for generating real-time insights into evolving implementation processes. Learning Evaluation generates systematic and rigorous cross-organizational findings about implementing healthcare innovations while also enhancing organizational capacity and accelerating translation of findings by facilitating continuous learning within individual sites. Researchers evaluating change initiatives and healthcare organizations implementing improvement initiatives may benefit from a Learning Evaluation approach.

A process evaluation of a social cognitive theory-based childhood obesity prevention intervention: the Comics for Health program.

PubMed

Branscum, Paul; Sharma, Manoj; Wang, Lihshing Leigh; Wilson, Bradley; Rojas-Guyler, Liliana

2013-03-01

Process evaluations are an often overlooked yet essential component of health promotion interventions. This study reports the results of a comprehensive process evaluation for the "Comics for Health" program, a childhood obesity prevention intervention implemented at 12 after-school programs. Qualitative and quantitative process data were collected using surveys, field notes, and open-item questionnaires, which assessed program fidelity, dose delivered, dose received, reach, recruitment, and context. Triangulation of methods was also employed to better understand how the program was implemented and received by the facilitator, staff members, and children in the program. Results indicated that program implementation had an almost perfect rate of fidelity with most lessons recording 100% tasks completed. Lessons were implemented in their intended order and lasted approximately 30 minutes as planned. After-school staff members reported that the program was well received by children, and this program should be replicated in the future. Attendance records showed that a majority of the children attended each lesson on the initial day of delivery (70.4%) and informal make-up lessons were implemented to compensate for the other children. Finally, several known sources of contamination were found such as past and concurrent exposure to similar health promotion interventions, which could potentially influence study outcomes. These findings will be used to help explain the results of this intervention and make recommendations for future intervention efforts.

Optimal changes in the prepress process: a model for evaluation of state and direction of productivity and quality improvements

NASA Astrophysics Data System (ADS)

Kihlberg, Henrik; Lindgren, Mats

1998-09-01

The demands changes with the customers marketplace which makes it crucial for prepress companies of today and those of tomorrow to be able to change their services. The production tools are becoming more standardized and similar through out the industry. Intelligent tools are developed at a rapid pace which results in possibilities to automate these processes. Key success factors of today and tomorrow are the ability to change and understand the customers' market. The market demands shorter delivery times and lower costs. The total number of printed editions are decreasing while each edition contains an increased numbers of pages and images. The customers requires higher quality with the ability to control and predict the end result. Case studies, interviews and workshops have been carried out at commercial printing companies, prepress houses, image bureau's, advertising agencies and digital photographers in Sweden. A major part of the research focus on the digital image process at eleven companies in the graphic arts industry, all of which have prepress. The analysis has resulted in the thorough knowledge of both the production process and the parameters to measure productivity and quality. A model for the evaluation of changes is presented, with measurable values for productivity and quality. The model can be used to map and compare the states prepress are in, and/or be used to evaluate if changes are needed.

US-VISIT Identity Matching Algorithm Evaluation Program: ADIS Algorithm Evaluation Project Plan Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grant, C W; Lenderman, J S; Gansemer, J D

This document is an update to the 'ADIS Algorithm Evaluation Project Plan' specified in the Statement of Work for the US-VISIT Identity Matching Algorithm Evaluation Program, as deliverable II.D.1. The original plan was delivered in August 2010. This document modifies the plan to reflect modified deliverables reflecting delays in obtaining a database refresh. This document describes the revised schedule of the program deliverables. The detailed description of the processes used, the statistical analysis processes and the results of the statistical analysis will be described fully in the program deliverables. The US-VISIT Identity Matching Algorithm Evaluation Program is work performed bymore » Lawrence Livermore National Laboratory (LLNL) under IAA HSHQVT-07-X-00002 P00004 from the Department of Homeland Security (DHS).« less

Risk Assessment on Constructors during Over-water Riprap Based on Entropy Weight and FAHP

NASA Astrophysics Data System (ADS)

Wu, Tongqing; Li, Liang; Liang, Zelong; Mao, Tian; Shao, Weifeng

2017-07-01

Being aimed at waterway regulation engineering, there exist risks of over-water riprap for constructors which keeps uncertainty and complexity. For the purpose of evaluating the possibility and consequence, this paper utilizes fuzzy analytic hierarchy process with abbreviation of FAHP to do empowerment on the related risk indicators, constructs FAHP under entropy weight and establishes relevant evaluation factor set and evaluation language for constructors during over-water riprap construction process. Through doing risk probability estimation and risk consequence size evaluation on the factor of constructors, this paper introduces this model into risk analysis on constructors during over-water riprap of Ching River waterway regulation project. Results show that evaluation of this method is so credible that it could be utilized in practical engineering.

Consumer involvement: effects on information processing from over-the-counter medication labels.

PubMed

Sansgiry, S S; Cady, P S; Sansgiry, S

2001-01-01

The objective of this study was to evaluate the effects of consumer involvement on information processing from over-the-counter (OTC) medication labels. A sample of 256 students evaluated simulated OTC product labels for two product categories (headache and cold) in random order. Each participant evaluated labels after reading a scenario to simulate high and low involvement respectively. A questionnaire was used to collect data on variables such as label comprehension, attitude-towards-product label, product evaluation, and purchase intention. The results indicate that when consumers are involved in their purchase of OTC medications they are significantly more likely to understand information from the label and evaluate it accordingly. However, involvement does not affect attitude-towards-product label nor does it enhance purchase intention.

POSTEROSUPERIOR SURGICAL ACCESS ROUTE FOR TREATMENT OF ACROMIOCLAVICULAR DISLOCATIONS: RESULTS FROM 84 SURGICAL CASES.

PubMed

Dal Molin, Danilo Canesin; Ribeiro, Fabiano Rebouças; Filho, Rômulo Brasil; Filardi, Cantídio Salvador; Tenor, Antonio Carlos; Stipp, Willian Nandi; Petros, Rodrigo Souto Borges

2012-01-01

To evaluate the results from surgical treatment of 84 cases of acute acromioclavicular dislocation, using a posterosuperior access route. Eighty-four cases of acute acromioclavicular dislocation (grade III in the Allman-Tossy classification) operated between November 2002 and May 2010 were evaluated. The patients' mean age was 34 years. The diagnoses were made using clinical and radiographic evaluations. The patients were operated by the same surgical team, within three weeks of the date of the trauma, using a posterosuperior approach to the shoulder to access the top of the base of the coracoid process for placement of two anchors, which were used in reducing the dislocation. The minimum follow-up was 12 months. The postoperative clinical-radiographic evaluation was done using the modified Karlsson criteria and the University of California at Los Angeles (UCLA) score. 92.8% of the 84 patients treated presented good or excellent results, and 7.2% presented fair or poor results, using the UCLA assessment score. According to the modified Karlsson criteria, 76.2% were assessed as grade A, 17.9% as grade B and 5.9% as grade C. The posterosuperior access route to the shoulder is a new option for accessing the coracoid process and treating acromioclavicular dislocation, with clinical and radiographic results equivalent to those in the literature.

Evaluation of the Removal of Indicator Bacteria from Domestic Sludge Processed by Autothermal Thermophilic Aerobic Digestion (ATAD)

PubMed Central

Piterina, Anna V.; Bartlett, John; Pembroke, Tony J.

2010-01-01

The degradation of sludge solids in an insulated reactor during Autothermal Thermophilic Aerobic Digestion (ATAD) processing results in auto-heating, thermal treatment and total solids reduction, however, the ability to eliminate pathogenic organisms has not been analysed under large scale process conditions. We evaluated the ATAD process over a period of one year in a two stage, full scale Irish ATAD plant established in Killarney and treating mixed primary and secondary sludge, by examining the sludge microbiologically at various stages during and following ATAD processing to determine its ability to eliminate indicator organisms. Salmonella spp. (pathogen) and fecal-coliform (indicator) densities were well below the limits used to validate class A biosolids in the final product. Enteric pathogens present at inlet were deactivated during the ATAD process and were not detected in the final product using both traditional microbial culture and molecular phylogenetic techniques. A high DNase activity was detected in the bulk sludge during the thermophilic digestion stage which may be responsible for the rapid turn over of DNA from lysed cells and the removal of mobile DNA. These results offer assurance for the safe use of ATAD sludge as a soil supplement following processing. PMID:20948933

Evaluation of the removal of indicator bacteria from domestic sludge processed by Autothermal Thermophilic Aerobic Digestion (ATAD).

PubMed

Piterina, Anna V; Bartlett, John; Pembroke, Tony J

2010-09-01

The degradation of sludge solids in an insulated reactor during Autothermal Thermophilic Aerobic Digestion (ATAD) processing results in auto-heating, thermal treatment and total solids reduction, however, the ability to eliminate pathogenic organisms has not been analysed under large scale process conditions. We evaluated the ATAD process over a period of one year in a two stage, full scale Irish ATAD plant established in Killarney and treating mixed primary and secondary sludge, by examining the sludge microbiologically at various stages during and following ATAD processing to determine its ability to eliminate indicator organisms. Salmonella spp. (pathogen) and fecal-coliform (indicator) densities were well below the limits used to validate class A biosolids in the final product. Enteric pathogens present at inlet were deactivated during the ATAD process and were not detected in the final product using both traditional microbial culture and molecular phylogenetic techniques. A high DNase activity was detected in the bulk sludge during the thermophilic digestion stage which may be responsible for the rapid turn over of DNA from lysed cells and the removal of mobile DNA. These results offer assurance for the safe use of ATAD sludge as a soil supplement following processing.

Friction Stir Welding in Wrought and Cast Aluminum Alloys: Weld Quality Evaluation and Effects of Processing Parameters on Microstructure and Mechanical Properties

NASA Astrophysics Data System (ADS)

Pan, Yi; Lados, Diana A.

2017-04-01

Friction stir welding (FSW) is a solid-state process widely used for joining similar and dissimilar materials for critical applications in the transportation sector. Understanding the effects of the process on microstructure and mechanical properties is critical in design for structural integrity. In this study, four aluminum alloy systems (wrought 6061-T651 and cast A356, 319, and A390) were processed in both as-fabricated and pre-weld heat-treated (T6) conditions using various processing parameters. The effects of processing and heat treatment on the resulting microstructures, macro-/micro-hardness, and tensile properties were systematically investigated and mechanistically correlated to changes in grain size, characteristic phases, and strengthening precipitates. Tensile tests were performed at room temperature both along and across the welding zones. A new method able to evaluate weld quality (using a weld quality index) was developed based on the stress concentration calculated under tensile loading. Optimum processing parameter domains that provide both defect-free welds and good mechanical properties were determined for each alloy and associated with the thermal history of the process. These results were further related to characteristic microstructural features, which can be used for component design and materials/process optimization.

User embracement with risk classification in an emergency care unit: an evaluative study.

PubMed

Hermida, Patrícia Madalena Vieira; Nascimento, Eliane Regina Pereira do; Echevarría-Guanilo, Maria Elena; Brüggemann, Odaléa Maria; Malfussi, Luciana Bihain Hagemann de

2018-01-01

Objective Describing the evaluation of the Structure, Process and Outcome of User Embracement with Risk Classification of an Emergency Care Unit from the perspective of physicians and nurses. Method An evaluative, descriptive, quantitative study developed in Santa Catarina. Data were collected using a validated and adapted instrument consisting of 21 items distributed in the dimensions of Structure (facilities), Process (activities and relationships in providing care) and Outcome (care effects). In the analysis, descriptive statistics and the Mean Ranking and Mean Score calculations were applied. Results The sample consisted of 37 participants. From the 21 evaluated items, 11 (52.4%) had a Mean Ranking between 3 and 4, and none of them reached the maximum ranking (5 points). "Prioritization of severe cases" and "Primary care according to the severity of the case" reached a higher Mean Ranking (4.5), while "Flowchart discussion" had the lowest Ranking (2.1). The dimensions of Structure, Process and Outcome reached mean scores of 23.9, 21.9 and 25.5, respectively, indicating a Precarious evaluation (17.5 to 26.1 points). Conclusion User Embracement with Risk Classification is precarious, especially regarding the Process which obtained a lower satisfaction level from the participants.

Process perspective on image quality evaluation

NASA Astrophysics Data System (ADS)

Leisti, Tuomas; Halonen, Raisa; Kokkonen, Anna; Weckman, Hanna; Mettänen, Marja; Lensu, Lasse; Ritala, Risto; Oittinen, Pirkko; Nyman, Göte

2008-01-01

The psychological complexity of multivariate image quality evaluation makes it difficult to develop general image quality metrics. Quality evaluation includes several mental processes and ignoring these processes and the use of a few test images can lead to biased results. By using a qualitative/quantitative (Interpretation Based Quality, IBQ) methodology, we examined the process of pair-wise comparison in a setting, where the quality of the images printed by laser printer on different paper grades was evaluated. Test image consisted of a picture of a table covered with several objects. Three other images were also used, photographs of a woman, cityscape and countryside. In addition to the pair-wise comparisons, observers (N=10) were interviewed about the subjective quality attributes they used in making their quality decisions. An examination of the individual pair-wise comparisons revealed serious inconsistencies in observers' evaluations on the test image content, but not on other contexts. The qualitative analysis showed that this inconsistency was due to the observers' focus of attention. The lack of easily recognizable context in the test image may have contributed to this inconsistency. To obtain reliable knowledge of the effect of image context or attention on subjective image quality, a qualitative methodology is needed.

Reengineering of waste management at the Oak Ridge National Laboratory. Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Myrick, T.E.

1997-08-01

A reengineering evaluation of the waste management program at the Oak Ridge National Laboratory (ORNL) was conducted during the months of February through July 1997. The goal of the reengineering was to identify ways in which the waste management process could be streamlined and improved to reduce costs while maintaining full compliance and customer satisfaction. A Core Team conducted preliminary evaluations and determined that eight particular aspects of the ORNL waste management program warranted focused investigations during the reengineering. The eight areas included Pollution Prevention, Waste Characterization, Waste Certification/Verification, Hazardous/Mixed Waste Stream, Generator/WM Teaming, Reporting/Records, Disposal End Points, and On-Sitemore » Treatment/Storage. The Core Team commissioned and assembled Process Teams to conduct in-depth evaluations of each of these eight areas. The Core Team then evaluated the Process Team results and consolidated the 80 process-specific recommendations into 15 overall recommendations. Benchmarking of a commercial nuclear facility, a commercial research facility, and a DOE research facility was conducted to both validate the efficacy of these findings and seek additional ideas for improvement. The outcome of this evaluation is represented by the 15 final recommendations that are described in this report.« less

Image Navigation and Registration Performance Assessment Evaluation Tools for GOES-R ABI and GLM

NASA Technical Reports Server (NTRS)

Houchin, Scott; Porter, Brian; Graybill, Justin; Slingerland, Philip

2017-01-01

The GOES-R Flight Project has developed an Image Navigation and Registration (INR) Performance Assessment Tool Set (IPATS) for measuring Advanced Baseline Imager (ABI) and Geostationary Lightning Mapper (GLM) INR performance metrics in the post-launch period for performance evaluation and long term monitoring. IPATS utilizes a modular algorithmic design to allow user selection of data processing sequences optimized for generation of each INR metric. This novel modular approach minimizes duplication of common processing elements, thereby maximizing code efficiency and speed. Fast processing is essential given the large number of sub-image registrations required to generate INR metrics for the many images produced over a 24 hour evaluation period. This paper describes the software design and implementation of IPATS and provides preliminary test results.

Process evaluation of the project P.A.T.H.S. (secondary 2 program): findings based on the co-walker scheme.

PubMed

Shek, Daniel T L; Tam, Suet-yan

2009-01-01

To understand the implementation quality of the Tier 1 Program (Secondary 2 Curriculum) of the P.A.T.H.S. Project, process evaluation was carried out by co-walkers through classroom observation of 195 units in 131 schools. Results showed that the overall level of program adherence was generally high with an average of 84.55%, and different factors of the implementation process were evaluated as positive. Quality of program implementation and achievement of program objectives were predicted by students' participation and involvement, strategies to enhance students' motivation, opportunity for reflection, time management, and class preparation. Success in program implementation was predicted by students' participation and involvement, classroom control, interactive delivery method, strategies to enhance students' motivation, opportunity for reflection, and lesson preparation.

Social Information Processing Mediates the Intergenerational Transmission of Aggressiveness in Romantic Relationships

PubMed Central

Fite, Jennifer E.; Bates, John E.; Holtzworth-Munroe, Amy; Dodge, Kenneth A.; Nay, Sandra Y.; Pettit, Gregory S.

2012-01-01

This study explored the K. A. Dodge (1986) model of social information processing as a mediator of the association between interparental relationship conflict and subsequent offspring romantic relationship conflict in young adulthood. The authors tested 4 social information processing stages (encoding, hostile attributions, generation of aggressive responses, and positive evaluation of aggressive responses) in separate models to explore their independent effects as potential mediators. There was no evidence of mediation for encoding and attributions. However, there was evidence of significant mediation for both the response generation and response evaluation stages of the model. Results suggest that the ability of offspring to generate varied social responses and effectively evaluate the potential outcome of their responses at least partially mediates the intergenerational transmission of relationship conflict. PMID:18540765

Selective influences of oxytocin on the evaluative processing of social stimuli

PubMed Central

Norman, Greg J; Cacioppo, John T; Morris, John S; Karelina, Kate; Malarkey, William B; DeVries, A Courtney; Berntson, Gary G

2013-01-01

The neuropeptide oxytocin has been implicated in a wide range of social processes, such as pair bonding, affiliation, and social judgments that may contribute to normal adjustment and psychiatric states. The present experimental study sought to elucidate potential underlying mechanisms by which oxytocin may impact social processes by examining the effects of intranasal oxytocin on basic evaluative processes. Subjects rated slide stimuli from the International Affective Picture System, varying across multiple categories (pleasant, neutral, unpleasant) and social content. Separate ratings for arousal and for the positive and negative components of valence were obtained in the context of a bivariate evaluative space model. Oxytocin did not have an independent significant effect on positivity or negativity ratings, but instead oxytocin treatment altered the interaction between these component processes for social, relative to non-social stimuli regardless of valence conditions. Specifically, oxytocin, relative to vehicle, significantly decreased arousal ratings to threatening human stimuli without altering ratings of threatening animal stimuli. These results indicate that oxytocin may exert its effects through dynamic alterations in the partially separable neural substrates mediating arousal as well as positive and negative evaluations of social stimuli. PMID:20498133

Assessment and Control of Spacecraft Charging Risks on the International Space Station

NASA Technical Reports Server (NTRS)

Koontz, Steve; Valentine, Mark; Keeping, Thomas; Edeen, Marybeth; Spetch, William; Dalton, Penni

2004-01-01

The International Space Station (ISS) operates in the F2 region of Earth's ionosphere, orbiting at altitudes ranging from 350 to 450 km at an inclination of 51.6 degrees. The relatively dense, cool F2 ionospheric plasma suppresses surface charging processes much of the time, and the flux of relativistic electrons is low enough to preclude deep dielectric charging processes. The most important spacecraft charging processes in the ISS orbital environment are: 1) ISS electrical power system interactions with the F2 plasma, 2) magnetic induction processes resulting from flight through the geomagnetic field and, 3) charging processes that result from interaction with auroral electrons at high latitude. Recently, the continuing review and evaluation of putative ISS charging hazards required by the ISS Program Office revealed that ISS charging could produce an electrical shock hazard to the ISS crew during extravehicular activity (EVA). ISS charging risks are being evaluated in an ongoing measurement and analysis campaign. The results of ISS charging measurements are combined with a recently developed model of ISS charging (the Plasma Interaction Model) and an exhaustive analysis of historical ionospheric variability data (ISS Ionospheric Specification) to evaluate ISS charging risks using Probabilistic Risk Assessment (PRA) methods. The PRA combines estimates of the frequency of occurrence and severity of the charging hazards with estimates of the reliability of various hazard controls systems, as required by NASA s safety and risk management programs, to enable design and selection of a hazard control approach that minimizes overall programmatic and personnel risk. The PRA provides a quantitative methodology for incorporating the results of the ISS charging measurement and analysis campaigns into the necessary hazard reports, EVA procedures, and ISS flight rules required for operating ISS in a safe and productive manner.

Performance analysis of different tuning rules for an isothermal CSTR using integrated EPC and SPC

NASA Astrophysics Data System (ADS)

Roslan, A. H.; Karim, S. F. Abd; Hamzah, N.

2018-03-01

This paper demonstrates the integration of Engineering Process Control (EPC) and Statistical Process Control (SPC) for the control of product concentration of an isothermal CSTR. The objectives of this study are to evaluate the performance of Ziegler-Nichols (Z-N), Direct Synthesis, (DS) and Internal Model Control (IMC) tuning methods and determine the most effective method for this process. The simulation model was obtained from past literature and re-constructed using SIMULINK MATLAB to evaluate the process response. Additionally, the process stability, capability and normality were analyzed using Process Capability Sixpack reports in Minitab. Based on the results, DS displays the best response for having the smallest rise time, settling time, overshoot, undershoot, Integral Time Absolute Error (ITAE) and Integral Square Error (ISE). Also, based on statistical analysis, DS yields as the best tuning method as it exhibits the highest process stability and capability.

Evaluate the role of organic acids in the protection of ligands from radiolytic degradation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Anneka; Mezyk, Stehpen; Peterman, Dean

In the Advanced TALSPEAK process, the bis(2-ethylhexyl)phosphoric acid (HDEHP) extractant used in the traditional TALSPEAK process is replaced by the extractant 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]). In addition, the aqueous phase complexant and buffer used in traditional TALSPEAK is replaced with the combination of N-(2-hydroxyethyl)ethylenediamine-N,N’,N’-triacetic acid (HEDTA) and citric acid. In order to evaluate the possible impacts of gamma radiolysis upon the efficacy of the Advanced TALSPEAK flowsheet, aqueous and organic phases corresponding to the extraction section of the proposed flowsheet were irradiated in the INL test loop under an ambient atmosphere. The results of these studies conducted at INL,more » led INL researchers to conclude that the scarcity of values of rate constants for the reaction of hydroxyl radical with the components of the Advanced TALSPEAK process chemistry was severely limiting the interpretation of the results of radiolysis studies performed at the INL. In this work, the rate of reaction of hydroxyl radical with citric acid at several pH values was measured using a competitive pulse radiolysis technique. This report describes those results and is written in completion of milestone M3FT-16IN030102028, the goal of which was to evaluate the role of organic acids in the protection of ligands from radiolytic degradation. The results reported here demonstrate the importance of obtaining hydroxyl radical reaction rate data for the conditions that closely resemble actual solution conditions expected to be used in an actual solvent extraction process. This report describes those results and is written in completion of milestone M3FT-16IN030102028, the goal of which was to evaluate the role of organic acids in the protection of ligands from radiolytic degradation.« less

Providing a Science Base for the Evaluation of Tobacco Products

PubMed Central

Berman, Micah L.; Connolly, Greg; Cummings, K. Michael; Djordjevic, Mirjana V.; Hatsukami, Dorothy K.; Henningfield, Jack E.; Myers, Matthew; O'Connor, Richard J.; Parascandola, Mark; Rees, Vaughan; Rice, Jerry M.

2015-01-01

Objective Evidence-based tobacco regulation requires a comprehensive scientific framework to guide the evaluation of new tobacco products and health-related claims made by product manufacturers. Methods The Tobacco Product Assessment Consortium (TobPRAC) employed an iterative process involving consortia investigators, consultants, a workshop of independent scientists and public health experts, and written reviews in order to develop a conceptual framework for evaluating tobacco products. Results The consortium developed a four-phased framework for the scientific evaluation of tobacco products. The four phases addressed by the framework are: (1) pre-market evaluation, (2) pre-claims evaluation, (3) post-market activities, and (4) monitoring and re-evaluation. For each phase, the framework proposes the use of validated testing procedures that will evaluate potential harms at both the individual and population level. Conclusions While the validation of methods for evaluating tobacco products is an ongoing and necessary process, the proposed framework need not wait for fully validated methods to be used in guiding tobacco product regulation today. PMID:26665160

Enriching the Web Processing Service

NASA Astrophysics Data System (ADS)

Wosniok, Christoph; Bensmann, Felix; Wössner, Roman; Kohlus, Jörn; Roosmann, Rainer; Heidmann, Carsten; Lehfeldt, Rainer

2014-05-01

The OGC Web Processing Service (WPS) provides a standard for implementing geospatial processes in service-oriented networks. In its current version 1.0.0 it allocates the operations GetCapabilities, DescribeProcess and Execute, which can be used to offer custom processes based on single or multiple sub-processes. A large range of ready to use fine granular, fundamental geospatial processes have been developed by the GIS-community in the past. However, modern use cases or whole workflow processes demand specifications of lifecycle management and service orchestration. Orchestrating smaller sub-processes is a task towards interoperability; a comprehensive documentation by using appropriate metadata is also required. Though different approaches were tested in the past, developing complex WPS applications still requires programming skills, knowledge about software libraries in use and a lot of effort for integration. Our toolset RichWPS aims at providing a better overall experience by setting up two major components. The RichWPS ModelBuilder enables the graphics-aided design of workflow processes based on existing local and distributed processes and geospatial services. Once tested by the RichWPS Server, a composition can be deployed for production use on the RichWPS Server. The ModelBuilder obtains necessary processes and services from a directory service, the RichWPS semantic proxy. It manages the lifecycle and is able to visualize results and debugging-information. One aim will be to generate reproducible results; the workflow should be documented by metadata that can be integrated in Spatial Data Infrastructures. The RichWPS Server provides a set of interfaces to the ModelBuilder for, among others, testing composed workflow sequences, estimating their performance and to publish them as common processes. Therefore the server is oriented towards the upcoming WPS 2.0 standard and its ability to transactionally deploy and undeploy processes making use of a WPS-T interface. In order to deal with the results of these processing workflows, a server side extension enables the RichWPS Server and its clients to use WPS presentation directives (WPS-PD), a content related enhancement for the standardized WPS schema. We identified essential requirements of the components of our toolset by applying two use cases. The first enables the simplified comparison of modeled and measured data, a common task in hydro-engineering to validate the accuracy of a model. An implementation of the workflow includes reading, harmonizing and comparing two datasets in NetCDF-format. 2D Water level data from the German Bight can be chosen, presented and evaluated in a web client with interactive plots. The second use case is motivated by the Marine Strategy Directive (MSD) of the EU, which demands monitoring, action plans and at least an evaluation of the ecological situation in marine environment. Information technics adapted to those of INSPIRE should be used. One of the parameters monitored and evaluated for MSD is the expansion and quality of seagrass fields. With the view towards other evaluation parameters we decompose the complex process of evaluation of seagrass in reusable process steps and implement those packages as configurable WPS.

Face-induced expectancies influence neural mechanisms of performance monitoring.

PubMed

Osinsky, Roman; Seeger, Jennifer; Mussel, Patrick; Hewig, Johannes

2016-04-01

In many daily situations, the consequences of our actions are predicted by cues that are often social in nature. For instance, seeing the face of an evaluator (e.g., a supervisor at work) may activate certain evaluative expectancies, depending on the history of prior encounters with that particular person. We investigated how such face-induced expectancies influence neurocognitive functions of performance monitoring. We recorded an electroencephalogram while participants completed a time-estimation task, during which they received performance feedback from a strict and a lenient evaluator. During each trial, participants first saw the evaluator's face before performing the task and, finally, receiving feedback. Therefore, faces could be used as predictive cues for the upcoming evaluation. We analyzed electrocortical signatures of performance monitoring at the stages of cue processing, task performance, and feedback reception. Our results indicate that, at the cue stage, seeing the strict evaluator's face results in an anticipatory preparation of fronto-medial monitoring mechanisms, as reflected by a sustained negative-going amplitude shift (i.e., the contingent negative variation). At the performance stage, face-induced expectancies of a strict evaluation rule led to increases of early performance monitoring signals (i.e., frontal-midline theta power). At the final stage of feedback reception, violations of outcome expectancies differentially affected the feedback-related negativity and frontal-midline theta power, pointing to a functional dissociation between these signatures. Altogether, our results indicate that evaluative expectancies induced by face-cues lead to adjustments of internal performance monitoring mechanisms at various stages of task processing.

Factors affecting adoption, implementation fidelity, and sustainability of the Redesigned Community Health Fund in Tanzania: a mixed methods protocol for process evaluation in the Dodoma region

PubMed Central

Kalolo, Albino; Radermacher, Ralf; Stoermer, Manfred; Meshack, Menoris; De Allegri, Manuela

2015-01-01

Background Despite the implementation of various initiatives to address low enrollment in voluntary micro health insurance (MHI) schemes in sub-Saharan Africa, the problem of low enrollment remains unresolved. The lack of process evaluations of such interventions makes it difficult to ascertain whether their poor results are because of design failures or implementation weaknesses. Objective In this paper, we describe a process evaluation protocol aimed at opening the ‘black box’ to evaluate the implementation processes of the Redesigned Community Health Fund (CHF) program in the Dodoma region of Tanzania. Design The study employs a cross-sectional mixed methods design and is being carried out 3 years after the launch of the Redesigned CHF program. The study is grounded in a conceptual framework which rests on the Diffusion of Innovation Theory and the Implementation Fidelity Framework. The study utilizes a mixture of quantitative and qualitative data collection tools (questionnaires, focus group discussions, in-depth interviews, and document review), and aligns the evaluation to the Theory of Intervention developed by our team. Quantitative data will be used to measure program adoption, implementation fidelity, and their moderating factors. Qualitative data will be used to explore the responses of stakeholders to the intervention, contextual factors, and moderators of adoption, implementation fidelity, and sustainability. Discussion This protocol describes a systematic process evaluation in relation to the implementation of a reformed MHI. We trust that the theoretical approaches and methodologies described in our protocol may be useful to inform the design of future process evaluations focused on the assessment of complex interventions, such as MHI schemes. PMID:26679408

Development of techniques for processing metal-metal oxide systems

NASA Technical Reports Server (NTRS)

Johnson, P. C.

1976-01-01

Techniques for producing model metal-metal oxide systems for the purpose of evaluating the results of processing such systems in the low-gravity environment afforded by a drop tower facility are described. Because of the lack of success in producing suitable materials samples and techniques for processing in the 3.5 seconds available, the program was discontinued.

A Participative Process for the Design and Production of Adult Basic Education Training Resources.

ERIC Educational Resources Information Center

Villa, Jane Kathryn; Chalmers, Michael

1981-01-01

Reviews the three-stage participative process used to create and test resources for Adult Basic Education (ABE) staff development in North Carolina. Introduces the 1980 State plan for ABE and its objectives. Describes workshops for program directors and instructors which resulted in staff development handbooks. Explains the evaluation process.…

National Job Corps Study: Report on the Process Analysis. Research and Evaluation Report Series.

ERIC Educational Resources Information Center

Johnson, Terry; Gritz, Mark; Jackson, Russell; Burghardt, John; Boussy, Carol; Leonard, Jan; Orians, Carlyn

This report presents results of a process analysis that describes and documents Job Corps services and operations. Chapter one provides overviews of Job Corps, the national Job Corps study, and the process analysis. Chapter two describes the administrative structure of Job Corps and presents data on the geographic distribution and characteristics…

A Science, Engineering and Technology (SET) Approach Improves Science Process Skills in 4-H Animal Science Participants

ERIC Educational Resources Information Center

Clarke, Katie C.

2010-01-01

A new Science, Engineering and Technology (SET) approach was designed for youth who participated in the Minnesota State Fair Livestock interview process. The project and evaluation were designed to determine if the new SET approach increased content knowledge and science process skills in participants. Results revealed that youth participants not…

23 CFR 924.9 - Planning.

Code of Federal Regulations, 2014 CFR

2014-04-01

... evaluation process to analyze and assess results achieved by the HSIP and uses this information, where... program of projects, technologies, or strategies to reduce or eliminate highway safety hazards; (G) Adopts... elements to develop highway safety improvement projects. (5) A process for establishing priorities for...

23 CFR 924.9 - Planning.

Code of Federal Regulations, 2012 CFR

2012-04-01

... evaluation process to analyze and assess results achieved by the HSIP and uses this information, where... program of projects, technologies, or strategies to reduce or eliminate highway safety hazards; (G) Adopts... elements to develop highway safety improvement projects. (5) A process for establishing priorities for...

23 CFR 924.9 - Planning.

Code of Federal Regulations, 2013 CFR

2013-04-01

... evaluation process to analyze and assess results achieved by the HSIP and uses this information, where... program of projects, technologies, or strategies to reduce or eliminate highway safety hazards; (G) Adopts... elements to develop highway safety improvement projects. (5) A process for establishing priorities for...

High pressure processing inactivates human norovirus within oysters

USDA-ARS?s Scientific Manuscript database

Consumption of raw bivalve mollusks can result in norovirus infection. One potential intervention for virus-contaminated shellfish is high pressure processing (HPP). Currently HPP is known to inactivate Vibrio bacteria, hepatitis A virus, and murine norovirus within oysters. To evaluate the potentia...

College Governance: A Comparison of Faculty Evaluation in Public and Private Colleges with Implications for the Improvement of the Evaluation Process at Johnson and Wales College.

ERIC Educational Resources Information Center

Bukowski, Joseph E.

This study focuses on selected factors in the evaluation of faculty members in: (1) colleges accredited by the Association of Independent Colleges and Schools; (2) public junior and senior colleges; and (3) Rhode Island colleges. Results of the study indicate that faculty evaluation schemes must follow the basic goals and philosophy of the…

Evaluation of automatic video summarization systems

NASA Astrophysics Data System (ADS)

Taskiran, Cuneyt M.

2006-01-01

Compact representations of video, or video summaries, data greatly enhances efficient video browsing. However, rigorous evaluation of video summaries generated by automatic summarization systems is a complicated process. In this paper we examine the summary evaluation problem. Text summarization is the oldest and most successful summarization domain. We show some parallels between these to domains and introduce methods and terminology. Finally, we present results for a comprehensive evaluation summary that we have performed.

Algorithm for the Evaluation of Imperfections in Auto Bodywork Using Profiles from a Retroreflective Image

PubMed Central

Barber, Ramon; Zwilling, Valerie; Salichs, Miguel A.

2014-01-01

Nowadays the automobile industry is becoming more and more demanding as far as quality is concerned. Within the wide variety of processes in which this quality must be ensured, those regarding the squeezing of the auto bodywork are especially important due to the fact that the quality of the resulting product is tested manually by experts, leading to inaccuracies of all types. In this paper, an algorithm is proposed for the automated evaluation of the imperfections in the sheets of the bodywork after the squeezing process. The algorithm processes the profile signals from a retroreflective image and characterizes an imperfection. It is based on a convergence criterion that follows the line of the maximum gradient of the imperfection and gives its geometrical characteristics as a result: maximum gradient, length, width, and area. PMID:24504105

Flux Recovery of a Forward Osmosis Membrane After a Fouling Process

NASA Technical Reports Server (NTRS)

Romero-Mangado, Jaione; Parodi, Jurek; Gamboa-Vazquez, Sonia; Stefanson, Ofir; Diaz-Cartagena, Diana C.; Flynn, Michael

2016-01-01

Wastewater treatment through forward osmosis (FO) membranes is a process that has been evaluated in the past years as an innovative technology for the Next Generation Life Support Systems. FO technologies are cost effective, and require very low energy consumption, but are subject to membrane fouling. Membrane fouling occurs when unwanted materials accumulate on the active side of the membrane during the wastewater treatment process, which leads to a decrease in membrane flux rate. The aim of this study is to identify the materials that cause flux rate reduction due to membrane fouling, as well as to evaluate the flux rate recovery after membrane treatment using commercially available antifoulants. Fourier Transform Infrared (FTIR) spectrometry results identified possible compounds that cause membrane fouling and FO testing results demonstrated flux rate recovery after membrane treatment using antifoulants.

Evaluation of somatosensory cortical differences between flutter and vibration tactile stimuli.

PubMed

Han, Sang Woo; Chung, Yoon Gi; Kim, Hyung-Sik; Chung, Soon-Cheol; Park, Jang-Yeon; Kim, Sung-Phil

2013-01-01

In parallel with advances in haptic-based mobile computing systems, understanding of the neural processing of vibrotactile information becomes of great importance. In the human nervous system, two types of vibrotactile information, flutter and vibration, are delivered from mechanoreceptors to the somatosensory cortex through segregated neural afferents. To investigate how the somatosensory cortex differentiates flutter and vibration, we analyzed the cortical responses to vibrotactile stimuli with a wide range of frequencies. Specifically, we examined whether cortical activity changed most around 50 Hz, which is known as a boundary between flutter and vibration. We explored various measures to evaluate separability of cortical activity across frequency and found that the hypothesis margin method resulted in the greatest separability between flutter and vibration. This result suggests that flutter and vibration information may be processed by different neural processes in the somatosensory cortex.

Open the `black box' creativity and innovation: a study of activities in R&D departments. Some prospects for engineering education

NASA Astrophysics Data System (ADS)

Millet, Charlyne; Oget, David; Cavallucci, Denis

2017-11-01

Innovation is a key component to the success and longevity of companies. Our research opens the 'black box' of creativity and innovation in R&D teams. We argue that understanding the nature of R&D projects in terms of creativity/innovation, efficiency/inefficiency, is important for designing education policies and improving engineering curriculum. Our research addresses the inventive design process, a lesser known aspect of the innovation process, in 197 R&D departments of industrial sector companies in France. One fundamental issue facing companies is to evaluate processes and results of innovation. Results show that the evaluation of innovation is confined by a lack of methodology of inventive projects. We will be establishing the foundations of a formal ontology for inventive design projects and finally some recommendations for engineering education.

Algorithm for the evaluation of imperfections in auto bodywork using profiles from a retroreflective image.

PubMed

Barber, Ramon; Zwilling, Valerie; Salichs, Miguel A

2014-02-05

Nowadays the automobile industry is becoming more and more demanding as far as quality is concerned. Within the wide variety of processes in which this quality must be ensured, those regarding the squeezing of the auto bodywork are especially important due to the fact that the quality of the resulting product is tested manually by experts, leading to inaccuracies of all types. In this paper, an algorithm is proposed for the automated evaluation of the imperfections in the sheets of the bodywork after the squeezing process. The algorithm processes the profile signals from a retroreflective image and characterizes an imperfection. It is based on a convergence criterion that follows the line of the maximum gradient of the imperfection and gives its geometrical characteristics as a result: maximum gradient, length, width, and area.

Automated processing of whole blood units: operational value and in vitro quality of final blood components.

PubMed

Jurado, Marisa; Algora, Manuel; Garcia-Sanchez, Félix; Vico, Santiago; Rodriguez, Eva; Perez, Sonia; Barbolla, Luz

2012-01-01

The Community Transfusion Centre in Madrid currently processes whole blood using a conventional procedure (Compomat, Fresenius) followed by automated processing of buffy coats with the OrbiSac system (CaridianBCT). The Atreus 3C system (CaridianBCT) automates the production of red blood cells, plasma and an interim platelet unit from a whole blood unit. Interim platelet unit are pooled to produce a transfusable platelet unit. In this study the Atreus 3C system was evaluated and compared to the routine method with regards to product quality and operational value. Over a 5-week period 810 whole blood units were processed using the Atreus 3C system. The attributes of the automated process were compared to those of the routine method by assessing productivity, space, equipment and staffing requirements. The data obtained were evaluated in order to estimate the impact of implementing the Atreus 3C system in the routine setting of the blood centre. Yield and in vitro quality of the final blood components processed with the two systems were evaluated and compared. The Atreus 3C system enabled higher throughput while requiring less space and employee time by decreasing the amount of equipment and processing time per unit of whole blood processed. Whole blood units processed on the Atreus 3C system gave a higher platelet yield, a similar amount of red blood cells and a smaller volume of plasma. These results support the conclusion that the Atreus 3C system produces blood components meeting quality requirements while providing a high operational efficiency. Implementation of the Atreus 3C system could result in a large organisational improvement.

Process evaluation results from the HEALTHY nutrition intervention to modify the total school food environment

PubMed Central

Volpe, S. L.; Hall, W. J.; Steckler, A.; Schneider, M.; Thompson, D.; Mobley, C.; Pham, T.; El ghormli, L.

2013-01-01

The process evaluation of HEALTHY, a large multi-center trial to decrease type 2 diabetes mellitus in middle school children, monitored the implementation of the intervention to ascertain the extent that components were delivered and received as intended. The purpose of this article is to report the process evaluation findings concerning the extent to which the HEALTHY nutrition intervention was implemented during the HEALTHY trial. Overall, the observed fidelity of implementing nutrition strategies improved from baseline to the end of the study. By the last semester, all but two nutrition process evaluation goals were met. The most challenging goal to implement was serving high fiber foods, including grain-based foods and legumes. The easiest goals to implement were lowering the fat content of foods offered and offering healthier beverages. The most challenging barriers experienced by research dietitians and food service staff were costs, availability of foods and student acceptance. Forming strong relationships between the research dietitians and food service staff was identified as a key strategy to meet HEALTHY nutrition goals. PMID:24107856

CARETS: A prototype regional environmental information system. Volume 12: User evaluation of experimental land use maps and related products from the central Atlantic test site

NASA Technical Reports Server (NTRS)

Alexander, R. H. (Principal Investigator); Mcginty, H. K., III

1975-01-01

The author has identified the following significant results. Recommendations resulting from the CARETS evaluation reflect the need to establish a flexible and reliable system for providing more detailed raw and processed land resource information as well as the need to improve the methods of making information available to users.

Evaluation of NASA speech encoder

NASA Technical Reports Server (NTRS)

1976-01-01

Techniques developed by NASA for spaceflight instrumentation were used in the design of a quantizer for speech-decoding. Computer simulation of the actions of the quantizer was tested with synthesized and real speech signals. Results were evaluated by a phometician. Topics discussed include the relationship between the number of quantizer levels and the required sampling rate; reconstruction of signals; digital filtering; speech recording, sampling, and storage, and processing results.

Validation of the NASA Dryden X-31 simulation and evaluation of mechanization techniques

NASA Technical Reports Server (NTRS)

Dickes, Edward; Kay, Jacob; Ralston, John

1994-01-01

This paper shall discuss the evaluation of the original Dryden X-31 aerodynamic math model, processes involved in the justification and creation of the modified data base, and comparison time history results of the model response with flight test.

APPLICATIONS ANALYSIS REPORT: BIOLOGICAL TREATMENT OF WOOD PRESERVING SITE GROUNDWATER BY BIOTROL, INC.

EPA Science Inventory

This report is an evaluation of the Biotrol, Inc. Aqueous Treatment System (BATS), a fixed-film, aerobic biological treatment process for contaminated groundwaters and other wastewaters. t summarizes and analyzes the results of the Superfund Innovative Technology Evaluation (SITE...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carpenter, Alberta; Mann, Margaret; Gelman, Rachel

In evaluating next-generation materials and processes, the supply chain can have a large impact on the life cycle energy impacts. The Materials Flow through Industry (MFI) tool was developed for the Department of Energy's Advanced Manufacturing Office to be able to evaluate the energy impacts of the U.S. supply chain. The tool allows users to perform process comparisons, material substitutions, and grid modifications, and to see the effects of implementing sector efficiency potentials (Masanet, et al. 2009). This paper reviews the methodology of the tool and provides results around specific scenarios.

A framework for the direct evaluation of large deviations in non-Markovian processes

NASA Astrophysics Data System (ADS)

Cavallaro, Massimo; Harris, Rosemary J.

2016-11-01

We propose a general framework to simulate stochastic trajectories with arbitrarily long memory dependence and efficiently evaluate large deviation functions associated to time-extensive observables. This extends the ‘cloning’ procedure of Giardiná et al (2006 Phys. Rev. Lett. 96 120603) to non-Markovian systems. We demonstrate the validity of this method by testing non-Markovian variants of an ion-channel model and the totally asymmetric exclusion process, recovering results obtainable by other means.

Performance measurement: integrating quality management and activity-based cost management.

PubMed

McKeon, T

1996-04-01

The development of an activity-based management system provides a framework for developing performance measures integral to quality and cost management. Performance measures that cross operational boundaries and embrace core processes provide a mechanism to evaluate operational results related to strategic intention and internal and external customers. The author discusses this measurement process that allows managers to evaluate where they are and where they want to be, and to set a course of action that closes the gap between the two.

Develop Roll-to-Roll Manufacturing Process of ZrO 2 Nanocrystals/Acrylic Nanocomposites for High Refractive Index Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Joshi, Pooran C.; Compton, Brett G.; Li, Jianlin

2015-04-01

The purpose of this Cooperative Research and Development Agreement (CRADA) was to develop and evaluate ZrO 2/acrylic nanocomposite coatings for integrated optoelectronic applications. The formulations engineered to be compatible with roll-to-roll process were evaluated in terms of optical and dielectric properties. The uniform distribution of the ZrO 2 nanocrystals in the polymer matrix resulted in highly tunable refractive index and dielectric response suitable for advanced photonic and electronic device applications.

Beef assessments using functional magnetic resonance imaging and sensory evaluation.

PubMed

Tapp, W N; Davis, T H; Paniukov, D; Brooks, J C; Brashears, M M; Miller, M F

2017-04-01

Functional magnetic resonance imaging (fMRI) has been used to unveil how some foods and basic rewards are processed in the human brain. This study evaluated how resting state functional connectivity in regions of the human brain changed after differing qualities of beef steaks were consumed. Functional images of participants (n=8) were collected after eating high or low quality beef steaks on separate days, after consumption a sensory ballot was administered to evaluate consumers' perceptions of tenderness, juiciness, flavor, and overall liking. Imaging data showed that high quality steak samples resulted in greater functional connectivity to the striatum, medial orbitofrontal cortex, and insular cortex at various stages after consumption (P≤0.05). Furthermore, high quality steaks elicited higher sensory ballot scores for each palatability trait (P≤0.01). Together, these results suggest that resting state fMRI may be a useful tool for evaluating the neural process that follows positive sensory experiences such as the enjoyment of high quality beef steaks. Published by Elsevier Ltd.

Development of a benchmark factor to detect wrinkles in bending parts

NASA Astrophysics Data System (ADS)

Engel, Bernd; Zehner, Bernd-Uwe; Mathes, Christian; Kuhnhen, Christopher

2013-12-01

The rotary draw bending process finds special use in the bending of parts with small bending radii. Due to the support of the forming zone during the bending process, semi-finished products with small wall thicknesses can be bent. One typical quality characteristic is the emergence of corrugations and wrinkles at the inside arc. Presently, the standard for the evaluation of wrinkles is insufficient. The wrinkles' distribution along the longitudinal axis of the tube results in an average value [1]. An evaluation of the wrinkles is not carried out. Due to the lack of an adequate basis of assessment, coordination problems between customers and suppliers occur. They result from an imprecision caused by the lack of quantitative evaluability of the geometric deviations at the inside arc. The benchmark factor for the inside arc presented in this article is an approach to holistically evaluate the geometric deviations at the inside arc. The classification of geometric deviations is carried out according to the area of the geometric characteristics and the respective flank angles.

Attitudes toward evaluation: An exploratory study of students' and stakeholders' social representations.

PubMed

Schultes, Marie-Therese; Kollmayer, Marlene; Mejeh, Mathias; Spiel, Christiane

2018-06-15

Positive attitudes toward evaluation among stakeholders are an important precondition for successful evaluation processes. However, empirical studies focusing on stakeholders' attitudes toward evaluation are scarce. The present paper explores the approach of assessing social representations as indicators of people's attitudes toward evaluation. In an exploratory study, two groups were surveyed: University students (n = 60) with rather theoretical knowledge of evaluation and stakeholders (n = 61) who had shortly before taken part in participatory evaluation studies. Both groups were asked to name their free associations with the term "evaluation", which were subsequently analyzed lexicographically. The results indicate different social representations of evaluation in the two groups. The student group primarily saw evaluation as an "appraisal", whereas the stakeholders emphasized the "improvement" resulting from evaluation. Implications for further evaluation research and practice are discussed. Copyright © 2018 Elsevier Ltd. All rights reserved.

SU-F-P-48: The Quantitative Evaluation and Comparison of Image Distortion and Loss of X-Ray Images Between Anti-Scattered Grid and Moire Compensation Processing in Digital Radiography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chung, W; Jung, J; Kang, Y

Purpose: To quantitatively analyze the influence image processing for Moire elimination has in digital radiography by comparing the image acquired from optimized anti-scattered grid only and the image acquired from software processing paired with misaligned low-frequency grid. Methods: Special phantom, which does not create scattered radiation, was used to acquire non-grid reference images and they were acquired without any grids. A set of images was acquired with optimized grid, aligned to pixel of a detector and other set of images was acquired with misaligned low-frequency grid paired with Moire elimination processing algorithm. X-ray technique used was based on consideration tomore » Bucky factor derived from non-grid reference images. For evaluation, we analyze by comparing pixel intensity of acquired images with grids to that of reference images. Results: When compared to image acquired with optimized grid, images acquired with Moire elimination processing algorithm showed 10 to 50% lower mean contrast value of ROI. Severe distortion of images was found with when the object’s thickness was measured at 7 or less pixels. In this case, contrast value measured from images acquired with Moire elimination processing algorithm was under 30% of that taken from reference image. Conclusion: This study shows the potential risk of Moire compensation images in diagnosis. Images acquired with misaligned low-frequency grid results in Moire noise and Moire compensation processing algorithm used to remove this Moire noise actually caused an image distortion. As a result, fractures and/or calcifications which are presented in few pixels only may not be diagnosed properly. In future work, we plan to evaluate the images acquired without grid but based on 100% image processing and the potential risks it possesses.« less

Performance evaluation of structure based and ligand based virtual screening methods on ten selected anti-cancer targets.

PubMed

Ramasamy, Thilagavathi; Selvam, Chelliah

2015-10-15

Virtual screening has become an important tool in drug discovery process. Structure based and ligand based approaches are generally used in virtual screening process. To date, several benchmark sets for evaluating the performance of the virtual screening tool are available. In this study, our aim is to compare the performance of both structure based and ligand based virtual screening methods. Ten anti-cancer targets and their corresponding benchmark sets from 'Demanding Evaluation Kits for Objective In silico Screening' (DEKOIS) library were selected. X-ray crystal structures of protein-ligand complexes were selected based on their resolution. Openeye tools such as FRED, vROCS were used and the results were carefully analyzed. At EF1%, vROCS produced better results but at EF5% and EF10%, both FRED and ROCS produced almost similar results. It was noticed that the enrichment factor values were decreased while going from EF1% to EF5% and EF10% in many cases. Published by Elsevier Ltd.

Fuzzy Evaluating Customer Satisfaction of Jet Fuel Companies

NASA Astrophysics Data System (ADS)

Cheng, Haiying; Fang, Guoyi

Based on the market characters of jet fuel companies, the paper proposes an evaluation index system of jet fuel company customer satisfaction from five dimensions as time, business, security, fee and service. And a multi-level fuzzy evaluation model composing with the analytic hierarchy process approach and fuzzy evaluation approach is given. Finally a case of one jet fuel company customer satisfaction evaluation is studied and the evaluation results response the feelings of the jet fuel company customers, which shows the fuzzy evaluation model is effective and efficient.

Comparisons of social interaction and activities of daily living between long-term care facility and community-dwelling stroke patients.

PubMed

Yoon, Jeong-Ae; Park, Se-Gwan; Roh, Hyo-Lyun

2015-10-01

[Purpose] This study was conducted to compare the correlation between social interaction and activities of daily living (ADL) between community-dwelling and long-term care facility stroke patients. [Subjects and Methods] The Subjects were 65 chronic stroke patients (32 facility-residing, 33 community-dwelling). The Evaluation Social Interaction (ESI) tool was used to evaluate social interaction and the Assessment of Motor and Process Skills (AMPS) measure was used to evaluate ADL. [Results] Both social interaction and ADL were higher in community-dwelling than facility-residing stroke patients. There was a correlation between ESI and ADL for both motor and process skills among facility-residing patients, while only ADL process skills and ESI correlated among community-dwelling patients. In a partial correlation analysis using ADL motor and process skills as control variables, only process skills correlated with ESI. [Conclusion] For rehabilitation of stroke patients, an extended treatment process that combines ADL and social activities is likely to be required. Furthermore, treatment programs and institutional systems that can improve social interaction and promote health maintenance for community-dwelling and facility-residing chronic stroke patients are needed throughout the rehabilitation process.

Evaluating the process parameters of the dry coating process using a 2(5-1) factorial design.

PubMed

Kablitz, Caroline Désirée; Urbanetz, Nora Anne

2013-02-01

A recent development of coating technology is dry coating, where polymer powder and liquid plasticizer are layered on the cores without using organic solvents or water. Several studies evaluating the process were introduced in literature, however, little information about the critical process parameters (CPPs) is given. Aim of the study was the investigation and optimization of CPPs with respect to one of the critical quality attributes (CQAs), the coating efficiency of the dry coating process in a rotary fluid bed. Theophylline pellets were coated with hydroxypropyl methylcellulose acetate succinate as enteric film former and triethyl citrate and acetylated monoglyceride as plasticizer. A 2(5-1) design of experiments (DOEs) was created investigating five independent process parameters namely coating temperature, curing temperature, feeding/spraying rate, air flow and rotor speed. The results were evaluated by multilinear regression using the software Modde(®) 7. It is shown, that generally, low feeding/spraying rates and low rotor speeds increase coating efficiency. High coating temperatures enhance coating efficiency, whereas medium curing temperatures have been found to be optimum in terms of coating efficiency. This study provides a scientific base for the design of efficient dry coating processes with respect to coating efficiency.

POSTEROSUPERIOR SURGICAL ACCESS ROUTE FOR TREATMENT OF ACROMIOCLAVICULAR DISLOCATIONS: RESULTS FROM 84 SURGICAL CASES

PubMed Central

Dal Molin, Danilo Canesin; Ribeiro, Fabiano Rebouças; Filho, Rômulo Brasil; Filardi, Cantídio Salvador; Tenor, Antonio Carlos; Stipp, Willian Nandi; Petros, Rodrigo Souto Borges

2015-01-01

Objective: To evaluate the results from surgical treatment of 84 cases of acute acromioclavicular dislocation, using a posterosuperior access route. Methods: Eighty-four cases of acute acromioclavicular dislocation (grade III in the Allman-Tossy classification) operated between November 2002 and May 2010 were evaluated. The patients’ mean age was 34 years. The diagnoses were made using clinical and radiographic evaluations. The patients were operated by the same surgical team, within three weeks of the date of the trauma, using a posterosuperior approach to the shoulder to access the top of the base of the coracoid process for placement of two anchors, which were used in reducing the dislocation. The minimum follow-up was 12 months. The postoperative clinical-radiographic evaluation was done using the modified Karlsson criteria and the University of California at Los Angeles (UCLA) score. Results: 92.8% of the 84 patients treated presented good or excellent results, and 7.2% presented fair or poor results, using the UCLA assessment score. According to the modified Karlsson criteria, 76.2% were assessed as grade A, 17.9% as grade B and 5.9% as grade C. Conclusion: The posterosuperior access route to the shoulder is a new option for accessing the coracoid process and treating acromioclavicular dislocation, with clinical and radiographic results equivalent to those in the literature. PMID:27047866

The Collaboration Readiness of Transdisciplinary Research Teams and Centers

PubMed Central

Hall, Kara L.; Stokols, Daniel; Moser, Richard P.; Taylor, Brandie K.; Thornquist, Mark D.; Nebeling, Linda C.; Ehret, Carolyn C.; Barnett, Matthew J.; McTiernan, Anne; Berger, Nathan A.; Goran, Michael I.; Jeffery, Robert W.

2009-01-01

Growing interest in promoting cross-disciplinary collaboration among health scientists has prompted several federal agencies, including the NIH, to establish large, multicenter initiatives intended to foster collaborative research and training. In order to assess whether these initiatives are effective in promoting scientific collaboration that ultimately results in public health improvements, it is necessary to develop new strategies for evaluating research processes and products as well as the longer-term societal outcomes associated with these programs. Ideally, evaluative measures should be administered over the entire course of large initiatives, including their near-term and later phases. The present study focuses on the development of new tools for assessing the readiness for collaboration among health scientists at the outset (during Year One) of their participation in the National Cancer Institute’s Transdisciplinary Research on Energetics and Cancer (TREC) initiative. Indexes of collaborative readiness, along with additional measures of near-term collaborative processes, were administered as part of the TREC Year-One evaluation survey. Additionally, early progress toward scientific collaboration and integration was assessed, using a protocol for evaluating written research products. Results from the Year-One survey and the ratings of written products provide evidence of cross-disciplinary collaboration among participants during the first year of the initiative, and also reveal opportunities for enhancing collaborative processes and outcomes during subsequent phases of the project. The implications of these findings for future evaluations of team science initiatives are discussed. PMID:18619396

Real-time slicing algorithm for Stereolithography (STL) CAD model applied in additive manufacturing industry

NASA Astrophysics Data System (ADS)

Adnan, F. A.; Romlay, F. R. M.; Shafiq, M.

2018-04-01

Owing to the advent of the industrial revolution 4.0, the need for further evaluating processes applied in the additive manufacturing application particularly the computational process for slicing is non-trivial. This paper evaluates a real-time slicing algorithm for slicing an STL formatted computer-aided design (CAD). A line-plane intersection equation was applied to perform the slicing procedure at any given height. The application of this algorithm has found to provide a better computational time regardless the number of facet in the STL model. The performance of this algorithm is evaluated by comparing the results of the computational time for different geometry.

Evaluation of Moving Object Detection Based on Various Input Noise Using Fixed Camera

NASA Astrophysics Data System (ADS)

Kiaee, N.; Hashemizadeh, E.; Zarrinpanjeh, N.

2017-09-01

Detecting and tracking objects in video has been as a research area of interest in the field of image processing and computer vision. This paper evaluates the performance of a novel method for object detection algorithm in video sequences. This process helps us to know the advantage of this method which is being used. The proposed framework compares the correct and wrong detection percentage of this algorithm. This method was evaluated with the collected data in the field of urban transport which include car and pedestrian in fixed camera situation. The results show that the accuracy of the algorithm will decreases because of image resolution reduction.

First On-Site Data Analysis System for Subaru/Suprime-Cam

NASA Astrophysics Data System (ADS)

Furusawa, Hisanori; Okura, Yuki; Mineo, Sogo; Takata, Tadafumi; Nakata, Fumiaki; Tanaka, Manobu; Katayama, Nobuhiko; Itoh, Ryosuke; Yasuda, Naoki; Miyazaki, Satoshi; Komiyama, Yutaka; Utsumi, Yousuke; Uchida, Tomohisa; Aihara, Hiroaki

2011-03-01

We developed an automated on-site quick analysis system for mosaic CCD data of Suprime-Cam, which is a wide-field camera mounted at the prime focus of the Subaru Telescope, Mauna Kea, Hawaii. The first version of the data-analysis system was constructed, and started to operate in general observations. This system is a new function of observing support at the Subaru Telescope to provide the Subaru user community with an automated on-site data evaluation, aiming at improvements of observers' productivity, especially in large imaging surveys. The new system assists the data evaluation tasks in observations by the continuous monitoring of the characteristics of every data frame during observations. The evaluation results and data frames processed by this system are also useful for reducing the data-processing time in a full analysis after an observation. The primary analysis functions implemented in the data-analysis system are composed of automated realtime analysis for data evaluation and on-demand analysis, which is executed upon request, including mosaicing analysis and flat making analysis. In data evaluation, which is controlled by the organizing software, the database keeps track of the analysis histories, as well as the evaluated values of data frames, including seeing and sky background levels; it also helps in the selection of frames for mosaicing and flat making analysis. We examined the system performance and confirmed an improvement in the data-processing time by a factor of 9 with the aid of distributed parallel data processing and on-memory data processing, which makes the automated data evaluation effective.

Assessing and Improving Performance: A Longitudinal Evaluation of Priority Setting and Resource Allocation in a Canadian Health Region

PubMed Central

Hall, William; Smith, Neale; Mitton, Craig; Urquhart, Bonnie; Bryan, Stirling

2018-01-01

Background: In order to meet the challenges presented by increasing demand and scarcity of resources, healthcare organizations are faced with difficult decisions related to resource allocation. Tools to facilitate evaluation and improvement of these processes could enable greater transparency and more optimal distribution of resources. Methods: The Resource Allocation Performance Assessment Tool (RAPAT) was implemented in a healthcare organization in British Columbia, Canada. Recommendations for improvement were delivered, and a follow up evaluation exercise was conducted to assess the trajectory of the organization’s priority setting and resource allocation (PSRA) process 2 years post the original evaluation. Results: Implementation of RAPAT in the pilot organization identified strengths and weaknesses of the organization’s PSRA process at the time of the original evaluation. Strengths included the use of criteria and evidence, an ability to reallocate resources, and the involvement of frontline staff in the process. Weaknesses included training, communication, and lack of program budgeting. Although the follow up revealed a regression from a more formal PSRA process, a legacy of explicit resource allocation was reported to be providing ongoing benefit for the organization. Conclusion: While past studies have taken a cross-sectional approach, this paper introduces the first longitudinal evaluation of PSRA in a healthcare organization. By including the strengths, weaknesses, and evolution of one organization’s journey, the authors’ intend that this paper will assist other healthcare leaders in meeting the challenges of allocating scarce resources. PMID:29626400

Developing Students' Creative Self-Efficacy Based on Design-Thinking: Evaluation of an Elective University Course

ERIC Educational Resources Information Center

Ohly, Sandra; Plückthun, Laura; Kissel, Dorothea

2017-01-01

The development of novel and useful ideas is a process that can be described in multiple steps, including information gathering, generating ideas and evaluating ideas. We evaluated a university course that was developed based on design thinking principles which employ similar steps. Our results show that the course was not effective in enhancing…

Teacher Evaluation in Chile: Highlights and Complexities in 13 Years of Experience

ERIC Educational Resources Information Center

Avalos-Bevan, Beatrice

2018-01-01

The paper examines the process of establishing a teacher evaluation system in Chile and its acceptance by teachers over time. The conceptual base upon which the system was established is described. Evidence is also examined from a variety of data sources and research related to the evaluation system as well as teachers' use of its results. This…

Traditional and nontraditional evaluations of student outcomes in a practical final examination of veterinary radiology.

PubMed

Koskinen, Heli I

2010-01-01

The Faculty of Veterinary Medicine at the University of Helsinki recognized the lack of systems to measure the quality of education. At the department level, this meant lack of systems to measure the quality of students' outcomes. The aim of this article was to compare the quality of outcomes of a final examination in veterinary radiology by calculating the correlations between traditional (quantitative scores traditionally given by veterinary teachers) and nontraditional (qualitative Structure of the Observed Learning Outcome, or SOLO, method) grading results. Evaluation of the quality of the questions is also included. The results indicate that SOLO offers criteria for quality evaluation, especially for questions. A correlation of 0.60 (p<0.01) existed between qualitative and quantitative estimations, and a correlation of 0.79 (p<0.01) existed between evaluators, both using traditional scores. Two suggestions for a better system to evaluate quality in the future: First, development of problem-solving skills during the learning process should also be assessed. Second, both the scoring of factual correctness of answers (knowledge) and the grammatical structure of an answer and the quality of presentation should be included in the quality evaluation process.

Development of a program logic model and evaluation plan for a participatory ergonomics intervention in construction.

PubMed

Jaegers, Lisa; Dale, Ann Marie; Weaver, Nancy; Buchholz, Bryan; Welch, Laura; Evanoff, Bradley

2014-03-01

Intervention studies in participatory ergonomics (PE) are often difficult to interpret due to limited descriptions of program planning and evaluation. In an ongoing PE program with floor layers, we developed a logic model to describe our program plan, and process and summative evaluations designed to describe the efficacy of the program. The logic model was a useful tool for describing the program elements and subsequent modifications. The process evaluation measured how well the program was delivered as intended, and revealed the need for program modifications. The summative evaluation provided early measures of the efficacy of the program as delivered. Inadequate information on program delivery may lead to erroneous conclusions about intervention efficacy due to Type III error. A logic model guided the delivery and evaluation of our intervention and provides useful information to aid interpretation of results. © 2013 Wiley Periodicals, Inc.

Operation, Modeling and Analysis of the Reverse Water Gas Shift Process

NASA Technical Reports Server (NTRS)

Whitlow, Jonathan E.

2001-01-01

The Reverse Water Gas Shift process is a candidate technology for water and oxygen production on Mars under the In-Situ Propellant Production project. This report focuses on the operation and analysis of the Reverse Water Gas Shift (RWGS) process, which has been constructed at Kennedy Space Center. A summary of results from the initial operation of the RWGS, process along with an analysis of these results is included in this report. In addition an evaluation of a material balance model developed from the work performed previously under the summer program is included along with recommendations for further experimental work.

An Empirical Investigation of the Impact of the Anchor and Adjustment Heuristic on the Audit Judgment Process

DTIC Science & Technology

1988-01-01

Pe ~ ** . . . ’ S .- ..% - - -- - - An Empirical Investigation of the Impact of the Anchor and Adjustment Heuristic on the Audit Judgment Process A...1 Introduction ....... ............... 1 Audit Opinion Process ... ............ 2 Professional Judgment ..... ........... 5 Heuristics in the Audit Process...to evaluating the results of analytic reviews and internal control compliance tests (Felix and Kinney 1982, also Libby 1981). Decomposing the audit opinion

Process Waste Assessment for the Diana Laser Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, N.M.

1993-12-01

This Process Waste Assessment was conducted to evaluate the Diana Laser Laboratory, located in the Combustion Research Facility. It documents the hazardous chemical waste streams generated by the laser process and establishes a baseline for future waste minimization efforts. This Process Waste Assessment will be reevaluated in approximately 18 to 24 months, after enough time has passed to implement recommendations and to compare results with the baseline established in this assessment.

The state of the art in evaluating the performance of department chairs and division heads.

PubMed

Dunning, David G; Durham, Timothy M; Aksu, Mert N; Lange, Brian M

2007-04-01

This study explores the little understood process of evaluating the performance of department chairs/division heads in dental schools. Specifically, this research aimed to elucidate the methods, processes, and outcomes related to the job performance of department chairs/division heads. Forty-three deans and 306 chairs completed surveys with both close-ended and open-ended questions. In addition, ten deans and ten chairs were interviewed. Results indicate that 80 to 90 percent of department chairs are formally evaluated, although as many as 50 percent may lack job descriptions. Recommended best practices for performance appraisal--such as having at least yearly appraisals, holding face-to-face meetings, and setting specific, personal performance objectives/benchmarks for chairs--are being used in most schools. Still, there is much room to improve appraisals by incorporating other recommended practices. Overall high levels of satisfaction were reported by both chairs and deans for the process and outcomes of appraisals. Qualitative data showed some convergence of opinions about appraisals with the notable exception of informal feedback. We explore some implications of these results, especially as they relate to improving performance appraisals.

Perceived ownership impacts reward evaluation within medial-frontal cortex.

PubMed

Krigolson, Olave E; Hassall, Cameron D; Balcom, Lynsey; Turk, David

2013-06-01

Ownership is a powerful construct. Indeed, in a series of recent studies, perceived ownership has been shown to increase attentional capacity, facilitate a memorial advantage, and elicit positive attitudes. Here, we sought to determine whether self-relevance would bias reward evaluation systems within the brain. To accomplish this, we had participants complete a simple gambling task during which they could "win" or "lose" prizes for themselves or for someone else, while electroencephalographic data were recorded. Our results indicated that the amplitude of the feedback error-related negativity, a component of the event-related brain potential sensitive to reward evaluation, was diminished when participants were not gambling for themselves. Furthermore, our data suggest that the ownership cues that indicated who would win or lose a given gamble either were processed as a potential for an increase in utility (i.e., gain: self-gambles) or were processed in a nonutilitarian manner (other-gambles). Importantly, our results suggest that the medial-frontal reward system is sensitive to perceived ownership, to the extent that it may not process changes in utility when they are not directly relevant to self.

Advanced Extraction of Spatial Information from High Resolution Satellite Data

NASA Astrophysics Data System (ADS)

Pour, T.; Burian, J.; Miřijovský, J.

2016-06-01

In this paper authors processed five satellite image of five different Middle-European cities taken by five different sensors. The aim of the paper was to find methods and approaches leading to evaluation and spatial data extraction from areas of interest. For this reason, data were firstly pre-processed using image fusion, mosaicking and segmentation processes. Results going into the next step were two polygon layers; first one representing single objects and the second one representing city blocks. In the second step, polygon layers were classified and exported into Esri shapefile format. Classification was partly hierarchical expert based and partly based on the tool SEaTH used for separability distinction and thresholding. Final results along with visual previews were attached to the original thesis. Results are evaluated visually and statistically in the last part of the paper. In the discussion author described difficulties of working with data of large size, taken by different sensors and different also thematically.

Automated matching software for clinical trials eligibility: measuring efficiency and flexibility.

PubMed

Penberthy, Lynne; Brown, Richard; Puma, Federico; Dahman, Bassam

2010-05-01

Clinical trials (CT) serve as the media that translates clinical research into standards of care. Low or slow recruitment leads to delays in delivery of new therapies to the public. Determination of eligibility in all patients is one of the most important factors to assure unbiased results from the clinical trials process and represents the first step in addressing the issue of under representation and equal access to clinical trials. This is a pilot project evaluating the efficiency, flexibility, and generalizibility of an automated clinical trials eligibility screening tool across 5 different clinical trials and clinical trial scenarios. There was a substantial total savings during the study period in research staff time spent in evaluating patients for eligibility ranging from 165h to 1329h. There was a marked enhancement in efficiency with the automated system for all but one study in the pilot. The ratio of mean staff time required per eligible patient identified ranged from 0.8 to 19.4 for the manual versus the automated process. The results of this study demonstrate that automation offers an opportunity to reduce the burden of the manual processes required for CT eligibility screening and to assure that all patients have an opportunity to be evaluated for participation in clinical trials as appropriate. The automated process greatly reduces the time spent on eligibility screening compared with the traditional manual process by effectively transferring the load of the eligibility assessment process to the computer. Copyright (c) 2010 Elsevier Inc. All rights reserved.

Evaluation of the effects of the seasonal variation of solar elevation angle and azimuth on the processes of digital filtering and thematic classification of relief units

NASA Technical Reports Server (NTRS)

Parada, N. D. J. (Principal Investigator); Novo, E. M. L. M.

1983-01-01

The effects of the seasonal variation of illumination over digital processing of LANDSAT images are evaluated. Two sets of LANDSAT data referring to the orbit 150 and row 28 were selected with illumination parameters varying from 43 deg to 64 deg for azimuth and from 30 deg to 36 deg for solar elevation respectively. IMAGE-100 system permitted the digital processing of LANDSAT data. Original images were transformed by means of digital filtering so as to enhance their spatial features. The resulting images were used to obtain an unsupervised classification of relief units. Topographic variables (declivity, altitude, relief range and slope length) were used to identify the true relief units existing on the ground. The LANDSAT over pass data show that digital processing is highly affected by illumination geometry, and there is no correspondence between relief units as defined by spectral features and those resulting from topographic features.

Using ultrasound technology for the inactivation and thermal sensitization of peroxidase in green coconut water.

PubMed

Rojas, Meliza Lindsay; Trevilin, Júlia Hellmeister; Funcia, Eduardo Dos Santos; Gut, Jorge Andrey Wilhelms; Augusto, Pedro Esteves Duarte

2017-05-01

Green coconut water has unique nutritional and sensorial qualities. Despite the different technologies already studied, its enzymatic stability is still challenging. This study evaluated the use of ultrasound technology (US) for inactivating/sensitizing coconut water peroxidase (POD). The effect of both US application alone and as a pre-treatment to thermal processing was evaluated. The enzyme activity during US processing was reduced 27% after 30min (286W/L, 20kHz), demonstrating its high resistance. The thermal inactivation was described by the Weibull model under non-isothermal conditions. The enzyme became sensitized to heat after US pre-treatment. Further, the use of US resulted in more uniform heat resistance. The results suggest that US is a good technology for sensitizing enzymes before thermal processing (even for an enzyme with high thermal resistance). Therefore, the use of this technology could decrease the undesirable effects of long times and/or the high temperatures of the conventional thermal processing. Copyright © 2016 Elsevier B.V. All rights reserved.

SCI-U: E-learning for patient education in spinal cord injury rehabilitation

PubMed Central

Shepherd, John D.; Badger-Brown, Karla M.; Legassic, Matthew S.; Walia, Saagar; Wolfe, Dalton L.

2012-01-01

Background/objectives To develop an online patient education resource for use in spinal cord injury rehabilitation. Participants The development process involved more than 100 subject-matter experts (SMEs) (rehabilitation professionals and consumers) from across Canada. Preliminary evaluation was conducted with 25 end-users. Methods An iterative development process was coordinated by a project team; SMEs (including patients) developed the content in working groups using wiki-based tools. Multiple rounds of feedback based on early prototypes helped improve the courses during development. Results Five courses were created, each featuring more than 45 minutes of video content and hundreds of media assets. Preliminary evaluation results indicate that users were satisfied by the courses and perceived them to be effective. Conclusions This is an effective process for developing multimedia patient education resources; the involvement of patients in all parts of the process was particularly helpful. Future work will focus on implementation, integration into clinical practice and other delivery formats (smart phones, tablets). PMID:23031169

Cast Stone Formulation for Nuclear Waste Immobilization at Higher Sodium Concentrations

DOE PAGES

Fox, Kevin; Cozzi, Alex; Roberts, Kimberly; ...

2014-11-01

Low activity radioactive waste at U.S. Department of Energy sites can be immobilized for permanent disposal using cementitious waste forms. This study evaluated waste forms produced with simulated wastes at concentrations up to twice that of currently operating processes. The simulated materials were evaluated for their fresh properties, which determine processability, and cured properties, which determine waste form performance. The results show potential for greatly reducing the volume of material. Fresh properties were sufficient to allow for processing via current practices. Cured properties such as compressive strength meet disposal requirements. Leachability indices provide an indication of expected long-term performance.

Modeling biogechemical reactive transport in a fracture zone

DOE Office of Scientific and Technical Information (OSTI.GOV)

Molinero, Jorge; Samper, Javier; Yang, Chan Bing, and Zhang, Guoxiang

2005-01-14

A coupled model of groundwater flow, reactive solute transport and microbial processes for a fracture zone of the Aspo site at Sweden is presented. This is the model of the so-called Redox Zone Experiment aimed at evaluating the effects of tunnel construction on the geochemical conditions prevailing in a fracture granite. It is found that a model accounting for microbially-mediated geochemical processes is able to reproduce the unexpected measured increasing trends of dissolved sulfate and bicarbonate. The model is also useful for testing hypotheses regarding the role of microbial processes and evaluating the sensitivity of model results to changes inmore » biochemical parameters.« less

Keyphrase based Evaluation of Automatic Text Summarization

NASA Astrophysics Data System (ADS)

Elghannam, Fatma; El-Shishtawy, Tarek

2015-05-01

The development of methods to deal with the informative contents of the text units in the matching process is a major challenge in automatic summary evaluation systems that use fixed n-gram matching. The limitation causes inaccurate matching between units in a peer and reference summaries. The present study introduces a new Keyphrase based Summary Evaluator KpEval for evaluating automatic summaries. The KpEval relies on the keyphrases since they convey the most important concepts of a text. In the evaluation process, the keyphrases are used in their lemma form as the matching text unit. The system was applied to evaluate different summaries of Arabic multi-document data set presented at TAC2011. The results showed that the new evaluation technique correlates well with the known evaluation systems: Rouge1, Rouge2, RougeSU4, and AutoSummENG MeMoG. KpEval has the strongest correlation with AutoSummENG MeMoG, Pearson and spearman correlation coefficient measures are 0.8840, 0.9667 respectively.

A Biopsychological Model of Anti-drug PSA Processing: Developing Effective Persuasive Messages.

PubMed

Hohman, Zachary P; Keene, Justin Robert; Harris, Breanna N; Niedbala, Elizabeth M; Berke, Collin K

2017-11-01

For the current study, we developed and tested a biopsychological model to combine research on psychological tension, the Limited Capacity Model of Motivated Mediated Message Processing, and the endocrine system to predict and understand how people process anti-drug PSAs. We predicted that co-presentation of pleasant and unpleasant information, vs. solely pleasant or unpleasant, will trigger evaluative tension about the target behavior in persuasive messages and result in a biological response (increase in cortisol, alpha amylase, and heart rate). In experiment 1, we assessed the impact of co-presentation of pleasant and unpleasant information in persuasive messages on evaluative tension (conceptualized as attitude ambivalence), in experiment 2, we explored the impact of co-presentation on endocrine system responses (salivary cortisol and alpha amylase), and in experiment 3, we assessed the impact of co-presentation on heart rate. Across all experiments, we demonstrated that co-presentation of pleasant and unpleasant information, vs. solely pleasant or unpleasant, in persuasive communications leads to increases in attitude ambivalence, salivary cortisol, salivary alpha amylase, and heart rate. Taken together, the results support the initial paths of our biopsychological model of persuasive message processing and indicate that including both pleasant and unpleasant information in a message impacts the viewer. We predict that increases in evaluative tension and biological responses will aid in memory and cognitive processing of the message. However, future research is needed to test that hypothesis.

Cost Models for MMC Manufacturing Processes

NASA Technical Reports Server (NTRS)

Elzey, Dana M.; Wadley, Haydn N. G.

1996-01-01

The quality cost modeling (QCM) tool is intended to be a relatively simple-to-use device for obtaining a first-order assessment of the quality-cost relationship for a given process-material combination. The QCM curve is a plot of cost versus quality (an index indicating microstructural quality), which is unique for a given process-material combination. The QCM curve indicates the tradeoff between cost and performance, thus enabling one to evaluate affordability. Additionally, the effect of changes in process design, raw materials, and process conditions on the cost-quality relationship can be evaluated. Such results might indicate the most efficient means to obtain improved quality at reduced cost by process design refinements, the implementation of sensors and models for closed loop process control, or improvement in the properties of raw materials being fed into the process. QCM also allows alternative processes for producing the same or similar material to be compared in terms of their potential for producing competitively priced, high quality material. Aside from demonstrating the usefulness of the QCM concept, this is one of the main foci of the present research program, namely to compare processes for making continuous fiber reinforced, metal matrix composites (MMC's). Two processes, low pressure plasma spray deposition and tape casting are considered for QCM development. This document consists of a detailed look at the design of the QCM approach, followed by discussion of the application of QCM to each of the selected MMC manufacturing processes along with results, comparison of processes, and finally, a summary of findings and recommendations.

Evaluating the Pros and Cons of Different Peer Review Policies via Simulation.

PubMed

Zhu, Jia; Fung, Gabriel; Wong, Wai Hung; Li, Zhixu; Xu, Chuanhua

2016-08-01

In the academic world, peer review is one of the major processes in evaluating a scholars contribution. In this study, we are interested in quantifying the merits of different policies in a peer review process, such as single-blind review, double-blind review, and obtaining authors feedback. Currently, insufficient work has been undertaken to evaluate the benefits of different peer review policies. One of the major reasons for this situation is the inability to conduct any empirical study because data are presently unavailable. In this case, a computer simulation is one of the best ways to conduct a study. We perform a series of simulations to study the effects of different policies on a peer review process. In this study, we focus on the peer review process of a typical computer science conference. Our results point to the crucial role of program chairs in determining the quality and diversity of the articles to be accepted for publication. We demonstrate the importance of discussion among reviewers, suggest circumstances in which the double-blind review policy should be adopted, and question the credibility of the authors feedback mechanism. Finally, we stress that randomness plays an important role in the peer review process, and this role cannot be eliminated. Although our model may not capture every component of a peer review process, it covers some of the most essential elements. Thus, even the simulation results clearly cannot be taken as literal descriptions of an actual peer review process. However, we can at least still use them to identify alternative directions for future study.

Classification and Quality Evaluation of Tobacco Leaves Based on Image Processing and Fuzzy Comprehensive Evaluation

PubMed Central

Zhang, Fan; Zhang, Xinhong

2011-01-01

Most of classification, quality evaluation or grading of the flue-cured tobacco leaves are manually operated, which relies on the judgmental experience of experts, and inevitably limited by personal, physical and environmental factors. The classification and the quality evaluation are therefore subjective and experientially based. In this paper, an automatic classification method of tobacco leaves based on the digital image processing and the fuzzy sets theory is presented. A grading system based on image processing techniques was developed for automatically inspecting and grading flue-cured tobacco leaves. This system uses machine vision for the extraction and analysis of color, size, shape and surface texture. Fuzzy comprehensive evaluation provides a high level of confidence in decision making based on the fuzzy logic. The neural network is used to estimate and forecast the membership function of the features of tobacco leaves in the fuzzy sets. The experimental results of the two-level fuzzy comprehensive evaluation (FCE) show that the accuracy rate of classification is about 94% for the trained tobacco leaves, and the accuracy rate of the non-trained tobacco leaves is about 72%. We believe that the fuzzy comprehensive evaluation is a viable way for the automatic classification and quality evaluation of the tobacco leaves. PMID:22163744

Summary: Experimental validation of real-time fault-tolerant systems

NASA Technical Reports Server (NTRS)

Iyer, R. K.; Choi, G. S.

1992-01-01

Testing and validation of real-time systems is always difficult to perform since neither the error generation process nor the fault propagation problem is easy to comprehend. There is no better substitute to results based on actual measurements and experimentation. Such results are essential for developing a rational basis for evaluation and validation of real-time systems. However, with physical experimentation, controllability and observability are limited to external instrumentation that can be hooked-up to the system under test. And this process is quite a difficult, if not impossible, task for a complex system. Also, to set up such experiments for measurements, physical hardware must exist. On the other hand, a simulation approach allows flexibility that is unequaled by any other existing method for system evaluation. A simulation methodology for system evaluation was successfully developed and implemented and the environment was demonstrated using existing real-time avionic systems. The research was oriented toward evaluating the impact of permanent and transient faults in aircraft control computers. Results were obtained for the Bendix BDX 930 system and Hamilton Standard EEC131 jet engine controller. The studies showed that simulated fault injection is valuable, in the design stage, to evaluate the susceptibility of computing sytems to different types of failures.

Problem Solving in Biology: A Methodology

ERIC Educational Resources Information Center

Wisehart, Gary; Mandell, Mark

2008-01-01

A methodology is described that teaches science process by combining informal logic and a heuristic for rating factual reliability. This system facilitates student hypothesis formation, testing, and evaluation of results. After problem solving with this scheme, students are asked to examine and evaluate arguments for the underlying principles of…

Performance evaluation method of electric energy data acquire system based on combination of subjective and objective weights

NASA Astrophysics Data System (ADS)

Gao, Chen; Ding, Zhongan; Deng, Bofa; Yan, Shengteng

2017-10-01

According to the characteristics of electric energy data acquire system (EEDAS), considering the availability of each index data and the connection between the index integrity, establishing the performance evaluation index system of electric energy data acquire system from three aspects as master station system, communication channel, terminal equipment. To determine the comprehensive weight of each index based on triangular fuzzy number analytic hierarchy process with entropy weight method, and both subjective preference and objective attribute are taken into consideration, thus realize the performance comprehensive evaluation more reasonable and reliable. Example analysis shows that, by combination with analytic hierarchy process (AHP) and triangle fuzzy numbers (TFN) to establish comprehensive index evaluation system based on entropy method, the evaluation results not only convenient and practical, but also more objective and accurate.

Evaluation of Gastrointestinal Leakage in Multiple Enteric Inflammation Models in Chickens.

PubMed

Kuttappan, Vivek A; Vicuña, Eduardo A; Latorre, Juan D; Wolfenden, Amanda D; Téllez, Guillermo I; Hargis, Billy M; Bielke, Lisa R

2015-01-01

Enteric inflammation models can help researchers' study methods to improve health and performance and evaluate various growth promoters and dietary formulations targeted to improve performance in poultry. Oral administration of fluorescein isothiocyanate-dextran (FITC-d; 3-5 kDa) and its pericellular mucosal epithelial leakage are an established marker to evaluate enteric inflammation in multiple species. The present study evaluated different methods to induce gut inflammation in poultry based on FITC-d leakage. Four independent experiments were completed with different inflammation treatment groups, and serum FITC-d and/or retention of FITC-d in GI tract were determined. In experiment 1 (n = 10 birds/treatment, broilers, processed at 14 days), groups included control (CON), dextran sodium sulfate (DSS; drinking water at 0.75%) and feed restriction (FRS; 24 h before processing). Experiment 2 (n = 14 birds/treatment, leghorns, processed at 7 days) included CON, DSS, FRS, and rye-based diet (RBD). In experiments 3 and 4 (n = 15 birds/treatment, broilers, processed at 7 days), groups were CON, DSS, high fat diet (HFD), FRS, and RBD. In all experiments, FRS and RBD treatments showed significantly higher serum FITC-d levels compared to the respective CON. This indicates that FRS and RBD results in disruption of the intact barrier of the gastrointestinal tract (GIT), resulting in increased gut permeability. DSS and HFD groups showed elevation of serum FITC-d levels although the magnitude of difference from respective CON was inconsistent between experiments. FRS was the only treatment which consistently showed elevated retention of FITC-d in GIT in all experiments. The results from present studies showed that FRS and RBD, based on serum FITC-d levels, can be robust models to induce gut leakage in birds in different age and species/strains.

The quality of instruments to assess the process of shared decision making: A systematic review.

PubMed

Gärtner, Fania R; Bomhof-Roordink, Hanna; Smith, Ian P; Scholl, Isabelle; Stiggelbout, Anne M; Pieterse, Arwen H

2018-01-01

To inventory instruments assessing the process of shared decision making and appraise their measurement quality, taking into account the methodological quality of their validation studies. In a systematic review we searched seven databases (PubMed, Embase, Emcare, Cochrane, PsycINFO, Web of Science, Academic Search Premier) for studies investigating instruments measuring the process of shared decision making. Per identified instrument, we assessed the level of evidence separately for 10 measurement properties following a three-step procedure: 1) appraisal of the methodological quality using the COnsensus-based Standards for the selection of health status Measurement INstruments (COSMIN) checklist, 2) appraisal of the psychometric quality of the measurement property using three possible quality scores, 3) best-evidence synthesis based on the number of studies, their methodological and psychometrical quality, and the direction and consistency of the results. The study protocol was registered at PROSPERO: CRD42015023397. We included 51 articles describing the development and/or evaluation of 40 shared decision-making process instruments: 16 patient questionnaires, 4 provider questionnaires, 18 coding schemes and 2 instruments measuring multiple perspectives. There is an overall lack of evidence for their measurement quality, either because validation is missing or methods are poor. The best-evidence synthesis indicated positive results for a major part of instruments for content validity (50%) and structural validity (53%) if these were evaluated, but negative results for a major part of instruments when inter-rater reliability (47%) and hypotheses testing (59%) were evaluated. Due to the lack of evidence on measurement quality, the choice for the most appropriate instrument can best be based on the instrument's content and characteristics such as the perspective that they assess. We recommend refinement and validation of existing instruments, and the use of COSMIN-guidelines to help guarantee high-quality evaluations.

On-Site Pilot Study - Removal of Uranium, Radium-226 and Arsenic from Impacted Leachate by Reverse Osmosis - 13155

DOE Office of Scientific and Technical Information (OSTI.GOV)

McMurray, Allan; Everest, Chris; Rilling, Ken

Conestoga-Rovers and Associates (CRA-LTD) performed an on-site pilot study at the Welcome Waste Management Facility in Port Hope, Ontario, Canada, to evaluate the effectiveness of a unique leachate treatment process for the removal of radioactive contaminants from leachate impacted by low-level radioactive waste. Results from the study also provided the parameters needed for the design of the CRA-LTD full scale leachate treatment process design. The final effluent water quality discharged from the process to meet the local surface water discharge criteria. A statistical software package was utilized to obtain the analysis of variance (ANOVA) for the results from design ofmore » experiment applied to determine the effect of the evaluated factors on the measured responses. The factors considered in the study were: percent of reverse osmosis permeate water recovery, influent coagulant dosage, and influent total dissolved solids (TDS) dosage. The measured responses evaluated were: operating time, average specific flux, and rejection of radioactive contaminants along with other elements. The ANOVA for the design of experiment results revealed that the operating time is affected by the percent water recovery to be achieved and the flocculant dosage over the range studied. The average specific flux and rejection for the radioactive contaminants were not affected by the factors evaluated over the range studied. The 3 month long on-site pilot testing on the impacted leachate revealed that the CRA-LTD leachate treatment process was robust and produced an effluent water quality that met the surface water discharge criteria mandated by the Canadian Nuclear Safety Commission and the local municipality. (authors)« less

Results from the VALUE perfect predictor experiment: process-based evaluation

NASA Astrophysics Data System (ADS)

Maraun, Douglas; Soares, Pedro; Hertig, Elke; Brands, Swen; Huth, Radan; Cardoso, Rita; Kotlarski, Sven; Casado, Maria; Pongracz, Rita; Bartholy, Judit

2016-04-01

Until recently, the evaluation of downscaled climate model simulations has typically been limited to surface climatologies, including long term means, spatial variability and extremes. But these aspects are often, at least partly, tuned in regional climate models to match observed climate. The tuning issue is of course particularly relevant for bias corrected regional climate models. In general, a good performance of a model for these aspects in present climate does therefore not imply a good performance in simulating climate change. It is now widely accepted that, to increase our condidence in climate change simulations, it is necessary to evaluate how climate models simulate relevant underlying processes. In other words, it is important to assess whether downscaling does the right for the right reason. Therefore, VALUE has carried out a broad process-based evaluation study based on its perfect predictor experiment simulations: the downscaling methods are driven by ERA-Interim data over the period 1979-2008, reference observations are given by a network of 85 meteorological stations covering all European climates. More than 30 methods participated in the evaluation. In order to compare statistical and dynamical methods, only variables provided by both types of approaches could be considered. This limited the analysis to conditioning local surface variables on variables from driving processes that are simulated by ERA-Interim. We considered the following types of processes: at the continental scale, we evaluated the performance of downscaling methods for positive and negative North Atlantic Oscillation, Atlantic ridge and blocking situations. At synoptic scales, we considered Lamb weather types for selected European regions such as Scandinavia, the United Kingdom, the Iberian Pensinsula or the Alps. At regional scales we considered phenomena such as the Mistral, the Bora or the Iberian coastal jet. Such process-based evaluation helps to attribute biases in surface variables to underlying processes and ultimately to improve climate models.

Application of activated carbon derived from scrap tires for adsorption of Rhodamine B.

PubMed

Li, Li; Liu, Shuangxi; Zhu, Tan

2010-01-01

Activated carbon derived from solid hazardous waste scrap tires was evaluated as a potential adsorbent for cationic dye removal. The adsorption process with respect to operating parameters was investigated to evaluate the adsorption characteristics of the activated pyrolytic tire char (APTC) for Rhodamine B (RhB). Systematic research including equilibrium, kinetics and thermodynamic studies was performed. The results showed that APTC was a potential adsorbent for RhB with a higher adsorption capacity than most adsorbents. Solution pH and temperature exert significant influence while ionic strength showed little effect on the adsorption process. The adsorption equilibrium data obey Langmuir isotherm and the kinetic data were well described by the pseudo second-order kinetic model. The adsorption process followed intra-particle diffusion model with more than one process affecting the adsorption process. Thermodynamic study confirmed that the adsorption was a physisorption process with spontaneous, endothermic and random characteristics.

Design and application of process control charting methodologies to gamma irradiation practices

NASA Astrophysics Data System (ADS)

Saylor, M. C.; Connaghan, J. P.; Yeadon, S. C.; Herring, C. M.; Jordan, T. M.

2002-12-01

The relationship between the contract irradiation facility and the customer has historically been based upon a "PASS/FAIL" approach with little or no quality metrics used to gage the control of the irradiation process. Application of process control charts, designed in coordination with mathematical simulation of routine radiation processing, can provide a basis for understanding irradiation events. By using tools that simulate the physical rules associated with the irradiation process, end-users can explore process-related boundaries and the effects of process changes. Consequently, the relationship between contractor and customer can evolve based on the derived knowledge. The resulting level of mutual understanding of the irradiation process and its resultant control benefits both the customer and contract operation, and provides necessary assurances to regulators. In this article we examine the complementary nature of theoretical (point kernel) and experimental (dosimetric) process evaluation, and the resulting by-product of improved understanding, communication and control generated through the implementation of effective process control charting strategies.

Observations on the Use of SCAN To Identify Children at Risk for Central Auditory Processing Disorder.

ERIC Educational Resources Information Center

Emerson, Maria F.; And Others

1997-01-01

The SCAN: A Screening Test for Auditory Processing Disorders was administered to 14 elementary children with a history of otitis media and 14 typical children, to evaluate the validity of the test in identifying children with central auditory processing disorder. Another experiment found that test results differed based on the testing environment…

Understanding Why a Child Is Struggling to Learn: The Role of Cognitive Processing Evaluation in Learning Disability Identification

ERIC Educational Resources Information Center

Johnson, Evelyn S.

2014-01-01

Learning disabilities (LDs) have long been presumed to be a neurological disorder resulting from a deficit in 1 or more cognitive processes. Although the emphasis on cognitive processing disorders has been included in the definition since the term was coined, and although it arguably represents the key distinguishing characteristic of LDs, it also…

Reduced Processing of Facial and Postural Cues in Social Anxiety: Insights from Electrophysiology

PubMed Central

Rossignol, Mandy; Fisch, Sophie-Alexandra; Maurage, Pierre; Joassin, Frédéric; Philippot, Pierre

2013-01-01

Social anxiety is characterized by fear of evaluative interpersonal situations. Many studies have investigated the perception of emotional faces in socially anxious individuals and have reported biases in the processing of threatening faces. However, faces are not the only stimuli carrying an interpersonal evaluative load. The present study investigated the processing of emotional body postures in social anxiety. Participants with high and low social anxiety completed an attention-shifting paradigm using neutral, angry and happy faces and postures as cues. We investigated early visual processes through the P100 component, attentional fixation on the P2, structural encoding mirrored by the N170, and attentional orientation towards stimuli to detect with the P100 locked on target occurrence. Results showed a global reduction of P100 and P200 responses to faces and postures in socially anxious participants as compared to non-anxious participants, with a direct correlation between self-reported social anxiety levels and P100 and P200 amplitudes. Structural encoding of cues and target processing were not modulated by social anxiety, but socially anxious participants were slower to detect the targets. These results suggest a reduced processing of social postural and facial cues in social anxiety. PMID:24040403

Continuous Evaluation in Ethics Education: A Case Study.

PubMed

McIntosh, Tristan; Higgs, Cory; Mumford, Michael; Connelly, Shane; DuBois, James

2018-04-01

A great need for systematic evaluation of ethics training programs exists. Those tasked with developing an ethics training program may be quick to dismiss the value of training evaluation in continuous process improvement. In the present effort, we use a case study approach to delineate how to leverage formative and summative evaluation measures to create a high-quality ethics education program. With regard to formative evaluation, information bearing on trainee reactions, qualitative data from the comments of trainees, in addition to empirical findings, can ensure that the training program operates smoothly. Regarding summative evaluation, measures examining trainee cognition, behavior, and organization-level results provide information about how much trainees have changed as a result of taking the ethics training. The implications of effective training program evaluation are discussed.

A Systematic Literature Review on Evaluation of Digital Tools for Authoring Evidence-Based Clinical Guidelines.

PubMed

Khodambashi, Soudabeh; Nytrø, Øystein

2017-01-01

To facilitate the clinical guideline (GL) development process, different groups of researchers have proposed tools that enable computer-supported tools for authoring and publishing GLs. In a previous study we interviewed GL authors in different Norwegian institutions and identified tool shortcomings. In this follow-up study our goal is to explore to what extent GL authoring tools have been evaluated by researchers, guideline organisations, or GL authors. This article presents results from a systematic literature review of evaluation (including usability) of GL authoring tools. A controlled database search and backward snow-balling were used to identify relevant articles. From the 12692 abstracts found, 188 papers were fully reviewed and 26 papers were identified as relevant. The GRADEPro tool has attracted some evaluation, however popular tools and platforms such as DECIDE, Doctor Evidence, JBI-SUMARI, G-I-N library have not been subject to specific evaluation from an authoring perspective. Therefore, we found that little attention was paid to the evaluation of the tools in general. We could not find any evaluation relevant to how tools integrate and support the complex GL development workflow. The results of this paper are highly relevant to GL authors, tool developers and GL publishing organisations in order to improve and control the GL development and maintenance process.

Concepts of skin protection: considerations for the evaluation and terminology of the performance of skin protective equipment.

PubMed

Brouwer, Derk H; Aitken, Robert J; Oppl, Reinhard; Cherrie, John W

2005-09-01

This article proposes a common language for better understanding processes involved in dermal exposure and skin protection. A conceptual model has been developed that systematically describes the transport of agent mass from sources, eventually resulting in "loading" of the skin surface or the skin contaminant layer. In view of a harmonized glossary of exposure terminology this is considered the exposure surface. Loading is defined as agent mass present in this layer divided by the exposure surface area. Skin protective equipment (SPE) is meant to reduce uptake, that is, an agent crosses the absorption barrier of the skin, by intervening in the processes of loading the exposure surface; however, the design of the equipment may fail to cover skin surface entirely. In addition, part of the mass intercepted by the SPE may reach the skin surface either by permeation, penetration, or by transfer when touching the contaminated exterior of the SPE. Evaluation of SPE performance has earlier focused on chemical resistance performance testing for permeation, penetration, or degradation of SPE-materials. In use-scenario practice, however, all processes will occur concurrently. Thus, SPE field performance evaluation including user-SPE interaction complementary to material testing is warranted. Results of laboratory testing for SPE-materials are reported as substance-specific breakthrough times and permeation rates. SPE field performance should be evaluated for reduction of either uptake or parameters that reflect the outcome of dermal exposure. Ideally, this should be based on the results of intervention-type workplace studies, for (e.g., assessment of exposure loading). The level of reduction can be expressed as a protection factor (ratio without/with SPE) for different parameters of dermal exposure or uptake. It is concluded that for evaluation of SPE-type performance, generic protection factors can be derived for substance-independent processes (e.g., reduction of exposure loading) but not for substance-specific reduction of uptake.

Towards a Cloud Based Smart Traffic Management Framework

NASA Astrophysics Data System (ADS)

Rahimi, M. M.; Hakimpour, F.

2017-09-01

Traffic big data has brought many opportunities for traffic management applications. However several challenges like heterogeneity, storage, management, processing and analysis of traffic big data may hinder their efficient and real-time applications. All these challenges call for well-adapted distributed framework for smart traffic management that can efficiently handle big traffic data integration, indexing, query processing, mining and analysis. In this paper, we present a novel, distributed, scalable and efficient framework for traffic management applications. The proposed cloud computing based framework can answer technical challenges for efficient and real-time storage, management, process and analyse of traffic big data. For evaluation of the framework, we have used OpenStreetMap (OSM) real trajectories and road network on a distributed environment. Our evaluation results indicate that speed of data importing to this framework exceeds 8000 records per second when the size of datasets is near to 5 million. We also evaluate performance of data retrieval in our proposed framework. The data retrieval speed exceeds 15000 records per second when the size of datasets is near to 5 million. We have also evaluated scalability and performance of our proposed framework using parallelisation of a critical pre-analysis in transportation applications. The results show that proposed framework achieves considerable performance and efficiency in traffic management applications.

More than Testing.

ERIC Educational Resources Information Center

Badger, Elizabeth

1992-01-01

Explains a set of processes that teachers might use to structure their evaluation of students' learning and understanding. Illustrates the processes of setting goals, deciding what to assess, gathering information, and using the results through a measurement task requiring students to estimate the number of popcorn kernels in a container. (MDH)

A Process for Planning.

ERIC Educational Resources Information Center

Gurowitz, William D.; And Others

1988-01-01

Describes how Division of Campus Life at Cornell University conducted long-range planning and the results of its 2-year effort. Explains 2 (strategic and organizational) by 3 (diagnosis, formulation, and execution) matrix providing systems view from describing and evaluating long-range planning. Presents 10-step process implemented at Cornell. (NB)

Breadboard linear array scan imager using LSI solid-state technology

NASA Technical Reports Server (NTRS)

Tracy, R. A.; Brennan, J. A.; Frankel, D. G.; Noll, R. E.

1976-01-01

The performance of large scale integration photodiode arrays in a linear array scan (pushbroom) breadboard was evaluated for application to multispectral remote sensing of the earth's resources. The technical approach, implementation, and test results of the program are described. Several self scanned linear array visible photodetector focal plane arrays were fabricated and evaluated in an optical bench configuration. A 1728-detector array operating in four bands (0.5 - 1.1 micrometer) was evaluated for noise, spectral response, dynamic range, crosstalk, MTF, noise equivalent irradiance, linearity, and image quality. Other results include image artifact data, temporal characteristics, radiometric accuracy, calibration experience, chip alignment, and array fabrication experience. Special studies and experimentation were included in long array fabrication and real-time image processing for low-cost ground stations, including the use of computer image processing. High quality images were produced and all objectives of the program were attained.

Evaluation of a webquest on the theme "management of material resources in nursing" by undergraduate students.

PubMed

Pereira, Marta Cristiane Alves; Melo, Márcia Regina Antonietto da Costa; Silva, Adriana Serafim Bispo E; Evora, Yolanda Dora Martinez

2010-01-01

The learning process mediated by information and communication technology has considerable importance in the current context. This study describes the evaluation of a WebQuest on the theme "Management of Material Resources in Nursing". It was developed in three stages: Stage 1 consisted of its pedagogical aspect, that is, elaboration and definition of content; Stage 2 involved the organization of content, inclusion of images and completion; Stage 3 corresponded to its availability to students. Results confirm the importance of information technology and information as instruments for a mediating teaching practice in the integration between valid knowledge and the complex and dynamic reality of health services. As a result of the students' favorable evaluation of the approximation with the reality of nursing work and satisfaction for performing the activity successfully, the WebQuest method was considered valid and innovating for the teaching-learning process.

Evaluation of a Participatory Ergonomics Intervention in Small Commercial Construction Firms

PubMed Central

Dale, Ann Marie; Jaegers, Lisa; Welch, Laura; Gardner, Bethany T.; Buchholz, Bryan; Weaver, Nancy; Evanoff, Bradley A.

2017-01-01

Background Work-related musculoskeletal disorders (WMSD) among construction workers remain high. Participatory ergonomics (PE) interventions that engage workers and employers in reducing work injury risks have shown mixed results. Methods Eight-six workers from seven contractors participated in a PE program. A logic model guided the process evaluation and summative evaluation of short term and intermediate impacts and long term outcomes from surveys and field records. Results Process measures showed good delivery of training, high worker engagement, and low contractor participation. Workers’ knowledge improved and workers reported changes to work practices and tools used; contractor provision of appropriate equipment was low (33%). No changes were seen in symptoms or reported physical effort. Conclusions The PE program produced many worker-identified ergonomic solutions, but lacked needed support from contractors. Future interventions should engage higher levels of the construction organizational system to improve contractor involvement for reducing WMSD. PMID:27094450

Evaluating the degradation, sorption, and negative mass balances of pharmaceuticals and personal care products during wastewater treatment.

PubMed

Blair, Benjamin; Nikolaus, Adam; Hedman, Curtis; Klaper, Rebecca; Grundl, Timothy

2015-09-01

Conventional activated sludge (CAS) wastewater treatment processes are insufficient at removing many pharmaceutical and personal care products (PPCPs) from wastewater. In addition, negative mass balances, where the effluent concentration is greater than the influent concentration, have been observed in wastewater treatment studies and a further understanding of these results is needed. In this study, the fate and occurrence of 57 PPCPs and hormones were evaluated in an activated sludge process and the mass balances were determined. The goal of the project was to understand the PPCPs biological degradation and the extent of sorption to solids. The samples containing in situ PPCPs (i.e. samples were not spiked with additional PPCPs) were evaluated. Forty-eight of the PPCPs were detected in the soluble form and 29 were detected sorbed to solids. Two notable results were found. First, the results of this study indicate a subset of the highly biodegradable PPCPs stop being degraded at low, yet notable, concentrations. Second, the results revealed that negative mass balances were present for a subset of the PPCPs when evaluating both the soluble and sorbed concentration, for example carbamazepine and ofloxacin. Desorption from solids was not found to attribute to negative mass balances. Overall, the results from this study provide new insights into the fate of PPCPs during CAS wastewater treatment by evaluating the degradation kinetics and sorption and the results may explain the consistent levels of highly degradable PPCPs being emitted from WWTPs worldwide. Copyright © 2015 Elsevier Ltd. All rights reserved.

Dopamine Inactivation Efficacy Related to Functional DAT1 and COMT Variants Influences Motor Response Evaluation

PubMed Central

Bender, Stephan; Rellum, Thomas; Freitag, Christine; Resch, Franz; Rietschel, Marcella; Treutlein, Jens; Jennen-Steinmetz, Christine; Brandeis, Daniel; Banaschewski, Tobias; Laucht, Manfred

2012-01-01

Background Dopamine plays an important role in orienting, response anticipation and movement evaluation. Thus, we examined the influence of functional variants related to dopamine inactivation in the dopamine transporter (DAT1) and catechol-O-methyltransferase genes (COMT) on the time-course of motor processing in a contingent negative variation (CNV) task. Methods 64-channel EEG recordings were obtained from 195 healthy adolescents of a community-based sample during a continuous performance task (A-X version). Early and late CNV as well as motor postimperative negative variation were assessed. Adolescents were genotyped for the COMT Val158Met and two DAT1 polymorphisms (variable number tandem repeats in the 3′-untranslated region and in intron 8). Results The results revealed a significant interaction between COMT and DAT1, indicating that COMT exerted stronger effects on lateralized motor post-processing (centro-parietal motor postimperative negative variation) in homozygous carriers of a DAT1 haplotype increasing DAT1 expression. Source analysis showed that the time interval 500–1000 ms after the motor response was specifically affected in contrast to preceding movement anticipation and programming stages, which were not altered. Conclusions Motor slow negative waves allow the genomic imaging of dopamine inactivation effects on cortical motor post-processing during response evaluation. This is the first report to point towards epistatic effects in the motor system during response evaluation, i.e. during the post-processing of an already executed movement rather than during movement programming. PMID:22649558

Mechanoluminescence assisting agile optimization of processing design on surgical epiphysis plates

NASA Astrophysics Data System (ADS)

Terasaki, Nao; Toyomasu, Takashi; Sonohata, Motoki

2018-04-01

We propose a novel method for agile optimization of processing design by visualization of mechanoluminescence. To demonstrate the effect of the new method, epiphysis plates were processed to form dots (diameters: 1 and 1.5 mm) and the mechanical information was evaluated. As a result, the appearance of new strain concentration was successfully visualized on the basis of mechanoluminescence, and complex mechanical information was instinctively understood by surgeons as the designers. In addition, it was clarified by mechanoluminescence analysis that small dots do not have serious mechanical effects such as strength reduction. Such detail mechanical information evaluated on the basis of mechanoluminescence was successfully applied to the judgement of the validity of the processing design. This clearly proves the effectiveness of the new methodology using mechanoluminescence for assisting agile optimization of the processing design.

Effects of the Deslagging Process on some Physicochemical Parameters of Honey

PubMed Central

Ranjbar, Ali Mohammad; Sadeghpour, Omid; Khanavi, Mahnaz; Shams Ardekani, Mohammad Reza; Moloudian, Hamid; Hajimahmoodi, Mannan

2015-01-01

Some physicochemical parameters of honey have been introduced by the International Honey Commission to evaluate its quality and origin but processes such as heating and filtering can affect these parameters. In traditional Iranian medicine, deslagging process involves boiling honey in an equal volume of water and removing the slag formed during process. The aim of this study was to determine the effects of deslagging process on parameters of color intensity, diastase evaluation, electrical conductivity, pH, free acidity, refractive index, hydroxy methyl furfural (HMF), proline and water contents according to the International Honey Committee (IHC) standards. The results showed that deslagged honey was significantly different from control honey in terms of color intensity, pH, diastase number, HMF and proline content. It can be concluded that the new standards are needed to regulate deslagged honey. PMID:25901175

Cognitive effort and pupil dilation in controlled and automatic processes.

PubMed

Querino, Emanuel; Dos Santos, Lafaiete; Ginani, Giuliano; Nicolau, Eduardo; Miranda, Débora; Romano-Silva, Marco; Malloy-Diniz, Leandro

2015-01-01

The Five Digits Test (FDT) is a Stroop paradigm test that aims to evaluate executive functions. It is composed of four parts, two of which are related to automatic and two of which are related to controlled processes. It is known that pupillary diameter increases as the task's cognitive demand increases. In the present study, we evaluated whether the pupillary diameter could distinguish cognitive effort between automated and controlled cognitive processing during the FDT as the task progressed. As a control task, we used a simple reading paradigm with a similar visual aspect as the FDT. We then divided each of the four parts into two blocks in order to evaluate the differences between the first and second half of the task. Results indicated that, compared to a control task, the FDT required higher cognitive effort for each consecutive part. Moreover, the first half of every part of the FDT induced dilation more than the second. The differences in pupil dilation during the first half of the four FDT parts were statistically significant between the parts 2 and 4 (p=0.023), and between the parts 3 and 4 (p=0.006). These results provide further evidence that cognitive effort and pupil diameter can distinguish controlled from automatic processes.

Comparison of infrared and 3D digital image correlation techniques applied for mechanical testing of materials

NASA Astrophysics Data System (ADS)

Krstulović-Opara, Lovre; Surjak, Martin; Vesenjak, Matej; Tonković, Zdenko; Kodvanj, Janoš; Domazet, Željko

2015-11-01

To investigate the applicability of infrared thermography as a tool for acquiring dynamic yielding in metals, a comparison of infrared thermography with three dimensional digital image correlation has been made. Dynamical tension tests and three point bending tests of aluminum alloys have been performed to evaluate results obtained by IR thermography in order to detect capabilities and limits for these two methods. Both approaches detect pastification zone migrations during the yielding process. The results of the tension test and three point bending test proved the validity of the IR approach as a method for evaluating the dynamic yielding process when used on complex structures such as cellular porous materials. The stability of the yielding process in the three point bending test, as contrary to the fluctuation of the plastification front in the tension test, is of great importance for the validation of numerical constitutive models. The research proved strong performance, robustness and reliability of the IR approach when used to evaluate yielding during dynamic loading processes, while the 3D DIC method proved to be superior in the low velocity loading regimes. This research based on two basic tests, proved the conclusions and suggestions presented in our previous research on porous materials where middle wave infrared thermography was applied.

Enabling thermal processing of ritonavir-polyvinyl alcohol amorphous solid dispersions by KinetiSol® Dispersing.

PubMed

LaFountaine, Justin S; Jermain, Scott V; Prasad, Leena Kumari; Brough, Chris; Miller, Dave A; Lubda, Dieter; McGinity, James W; Williams, Robert O

2016-04-01

Polyvinyl alcohol has received little attention as a matrix polymer in amorphous solid dispersions (ASDs) due to its thermal and rheological limitations in extrusion processing and limited organic solubility in spray drying applications. Additionally, in extrusion processing, the high temperatures required to process often exclude thermally labile APIs. The purpose of this study was to evaluate the feasibility of processing polyvinyl alcohol amorphous solid dispersions utilizing the model compound ritonavir with KinetiSol® Dispersing (KSD) technology. The effects of KSD rotor speed and ejection temperature on the physicochemical properties of the processed material were evaluated. Powder X-ray diffraction and modulated differential scanning calorimetry were used to confirm amorphous conversion. Liquid chromatography-mass spectroscopy was used to characterize and identify degradation pathways of ritonavir during KSD processing and (13)C nuclear magnetic resonance spectroscopy was used to investigate polymer stability. An optimal range of processing conditions was found that resulted in amorphous product and minimal to no drug and polymer degradation. Drug release of the ASD produced from the optimal processing conditions was evaluated using a non-sink, pH-shift dissolution test. The ability to process amorphous solid dispersions with polyvinyl alcohol as a matrix polymer will enable further investigations of the polymer's performance in amorphous systems for poorly water-soluble compounds. Copyright © 2016 Elsevier B.V. All rights reserved.

Defining and reconstructing clinical processes based on IHE and BPMN 2.0.

PubMed

Strasser, Melanie; Pfeifer, Franz; Helm, Emmanuel; Schuler, Andreas; Altmann, Josef

2011-01-01

This paper describes the current status and the results of our process management system for defining and reconstructing clinical care processes, which contributes to compare, analyze and evaluate clinical processes and further to identify high cost tasks or stays. The system is founded on IHE, which guarantees standardized interfaces and interoperability between clinical information systems. At the heart of the system there is BPMN, a modeling notation and specification language, which allows the definition and execution of clinical processes. The system provides functionality to define healthcare information system independent clinical core processes and to execute the processes in a workflow engine. Furthermore, the reconstruction of clinical processes is done by evaluating an IHE audit log database, which records patient movements within a health care facility. The main goal of the system is to assist hospital operators and clinical process managers to detect discrepancies between defined and actual clinical processes and as well to identify main causes of high medical costs. Beyond that, the system can potentially contribute to reconstruct and improve clinical processes and enhance cost control and patient care quality.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, X., E-mail: Xiujuan.jiang@pnnl.gov

Soft magnetic materials are often limited in scalability due to conventional processes that do not retain beneficial microstructures, and their associated physical properties, during densification. In this work, friction consolidation (FC) has been studied to fabricate Fe−Si soft magnetic materials from gas-atomized powder precursors. Fe−Si powder is consolidated using variable pressure and tool rotation speed in an effort to evaluate this unique densification approach for potential improvements in magnetic properties. FC, due to the high shear deformation involved, is shown to result in uniform gradual grain structure refinement across the consolidated workpiece from the center nearest the tool to themore » edge. Magnetic properties along different orientations indicate little, if any, textural orientation in the refined grain structure. The effect of annealing on the magnetic properties is evaluated and shown to decrease coercivity. FC processing was able to retain the magnetization of the original gas-atomized powders but further process optimization is needed to reach the optimal coercivity for the soft magnetic materials applications. - Highlights: •Friction stir processing was utilized to consolidate Fe−Si soft magnetic powders. •The resultant microstructure and magnetic properties were correlated to the processing conditions. •Friction consolidation refined the grain size of the materials by ~ 40%. •Annealing successfully reduced the coercivity induced by the stress during processing. •The results shine light on the possible scaling up of nanostructured materials.« less

Evaluation of the effectiveness and safety of the thermo-treatment process to dispose of recombinant DNA waste from biological research laboratories.

PubMed

Li, Meng-Nan; Zheng, Guang-Hong; Wang, Lei; Xiao, Wei; Fu, Xiao-Hua; Le, Yi-Quan; Ren, Da-Ming

2009-01-01

The discharge of recombinant DNA waste from biological laboratories into the eco-system may be one of the pathways resulting in horizontal gene transfer or "gene pollution". Heating at 100 degrees C for 5-10 min is a common method for treating recombinant DNA waste in biological research laboratories in China. In this study, we evaluated the effectiveness and the safety of the thermo-treatment method in the disposal of recombinant DNA waste. Quantitative PCR, plasmid transformation and electrophoresis technology were used to evaluate the decay/denaturation efficiency during the thermo-treatment process of recombinant plasmid, pET-28b. Results showed that prolonging thermo-treatment time could improve decay efficiency of the plasmid, and its decay half-life was 2.7-4.0 min during the thermo-treatment at 100 degrees C. However, after 30 min of thermo-treatment some transforming activity remained. Higher ionic strength could protect recombinant plasmid from decay during the treatment process. These results indicate that thermo-treatment at 100 degrees C cannot decay and inactivate pET-28b completely. In addition, preliminary results showed that thermo-treated recombinant plasmids were not degraded completely in a short period when they were discharged into an aquatic environment. This implies that when thermo-treated recombinant DNAs are discharged into the eco-system, they may have enough time to re-nature and transform, thus resulting in gene diffusion.

Fat substitutes in processing of sausages using piramutaba waste.

PubMed

de Fátima Henriques Lourenço, Lúcia; Dos Santos Galvão, Giane Célia; da Conceição Amaral Ribeiro, Suezilde; de Fátima Amaral Ribeiro, Carmelita; Park, Kil Jin

2014-07-01

The aim of this study was to evaluate fat substitute in processing of sausages prepared with surimi of waste from piramutaba filleting. The formulation ingredients were mixed with the fat substitutes added according to a fractional planning 2(4-1), where the independent variables, manioc starch (Ms), hydrogenated soy fat (F), texturized soybean protein (Tsp) and carrageenan (Cg) were evaluated on the responses of pH, texture (Tx), raw batter stability (RBS) and water holding capacity (WHC) of the sausage. Fat substitutes were evaluated in 11 formulations and the results showed that the greatest effects on the responses were found to Ms, F and Cg, being eliminated from the formulation Tsp. To find the best formulation for processing piramutaba sausage was made a complete factorial planning of 2(3) to evaluate the concentrations of fat substitutes in an enlarged range. The optimum condition found for fat substitutes in the sausages formulation were carrageenan (0.51%), manioc starch (1.45%) and fat (1.2%).

Evaluation of an Interview Process for Admission Into a School of Pharmacy

PubMed Central

Friesner, Daniel L.

2012-01-01

Objective. To evaluate the doctor of pharmacy (PharmD) admissions interview process at North Dakota State University (NDSU). Methods. Faculty pairs interviewed candidates using a standardized grading rubric to evaluate qualitative parameters or attributes such as ethics, relevant life and work experience, emotional maturity, commitment to patient care, leadership, and understanding of the pharmacy profession. Total interview scores, individual attribute domain scores, and the consistency and reliability of the interviewers were assessed. Results. The total mean interview score for the candidate pool was 17.4 of 25 points. Mean scores for individual domains ranged from 2.3 to 3.0 on a Likert-scale of 0-4. Nine of the 11 faculty pairs showed no mean differences from their interview partner in total interview scores given. Evaluations by 8 of the 11 faculty pairs produced high interrater reliability. Conclusions. The current interview process is generally consistent and reliable; however, future improvements such as additional interviewer training and adoption of a multiple mini-interview format could be made. PMID:22438594

UCODE_2005 and six other computer codes for universal sensitivity analysis, calibration, and uncertainty evaluation constructed using the JUPITER API

USGS Publications Warehouse

Poeter, Eileen E.; Hill, Mary C.; Banta, Edward R.; Mehl, Steffen; Christensen, Steen

2006-01-01

This report documents the computer codes UCODE_2005 and six post-processors. Together the codes can be used with existing process models to perform sensitivity analysis, data needs assessment, calibration, prediction, and uncertainty analysis. Any process model or set of models can be used; the only requirements are that models have numerical (ASCII or text only) input and output files, that the numbers in these files have sufficient significant digits, that all required models can be run from a single batch file or script, and that simulated values are continuous functions of the parameter values. Process models can include pre-processors and post-processors as well as one or more models related to the processes of interest (physical, chemical, and so on), making UCODE_2005 extremely powerful. An estimated parameter can be a quantity that appears in the input files of the process model(s), or a quantity used in an equation that produces a value that appears in the input files. In the latter situation, the equation is user-defined. UCODE_2005 can compare observations and simulated equivalents. The simulated equivalents can be any simulated value written in the process-model output files or can be calculated from simulated values with user-defined equations. The quantities can be model results, or dependent variables. For example, for ground-water models they can be heads, flows, concentrations, and so on. Prior, or direct, information on estimated parameters also can be considered. Statistics are calculated to quantify the comparison of observations and simulated equivalents, including a weighted least-squares objective function. In addition, data-exchange files are produced that facilitate graphical analysis. UCODE_2005 can be used fruitfully in model calibration through its sensitivity analysis capabilities and its ability to estimate parameter values that result in the best possible fit to the observations. Parameters are estimated using nonlinear regression: a weighted least-squares objective function is minimized with respect to the parameter values using a modified Gauss-Newton method or a double-dogleg technique. Sensitivities needed for the method can be read from files produced by process models that can calculate sensitivities, such as MODFLOW-2000, or can be calculated by UCODE_2005 using a more general, but less accurate, forward- or central-difference perturbation technique. Problems resulting from inaccurate sensitivities and solutions related to the perturbation techniques are discussed in the report. Statistics are calculated and printed for use in (1) diagnosing inadequate data and identifying parameters that probably cannot be estimated; (2) evaluating estimated parameter values; and (3) evaluating how well the model represents the simulated processes. Results from UCODE_2005 and codes RESIDUAL_ANALYSIS and RESIDUAL_ANALYSIS_ADV can be used to evaluate how accurately the model represents the processes it simulates. Results from LINEAR_UNCERTAINTY can be used to quantify the uncertainty of model simulated values if the model is sufficiently linear. Results from MODEL_LINEARITY and MODEL_LINEARITY_ADV can be used to evaluate model linearity and, thereby, the accuracy of the LINEAR_UNCERTAINTY results. UCODE_2005 can also be used to calculate nonlinear confidence and predictions intervals, which quantify the uncertainty of model simulated values when the model is not linear. CORFAC_PLUS can be used to produce factors that allow intervals to account for model intrinsic nonlinearity and small-scale variations in system characteristics that are not explicitly accounted for in the model or the observation weighting. The six post-processing programs are independent of UCODE_2005 and can use the results of other programs that produce the required data-exchange files. UCODE_2005 and the other six codes are intended for use on any computer operating system. The programs con

Right hemisphere damage: Communication processing in adults evaluated by the Brazilian Protocole MEC – Bateria MAC

PubMed Central

Fonseca, Rochele Paz; Fachel, Jandyra Maria Guimarães; Chaves, Márcia Lorena Fagundes; Liedtke, Francéia Veiga; Parente, Maria Alice de Mattos Pimenta

2007-01-01

Right-brain-damaged individuals may present discursive, pragmatic, lexical-semantic and/or prosodic disorders. Objective To verify the effect of right hemisphere damage on communication processing evaluated by the Brazilian version of the Protocole Montréal d’Évaluation de la Communication (Montreal Communication Evaluation Battery) – Bateria Montreal de Avaliação da Comunicação, Bateria MAC, in Portuguese. Methods A clinical group of 29 right-brain-damaged participants and a control group of 58 non-brain-damaged adults formed the sample. A questionnaire on sociocultural and health aspects, together with the Brazilian MAC Battery was administered. Results Significant differences between the clinical and control groups were observed in the following MAC Battery tasks: conversational discourse, unconstrained, semantic and orthographic verbal fluency, linguistic prosody repetition, emotional prosody comprehension, repetition and production. Moreover, the clinical group was less homogeneous than the control group. Conclusions A right-brain-damage effect was identified directly, on three communication processes: discursive, lexical-semantic and prosodic processes, and indirectly, on pragmatic process. PMID:29213400

Real association of factors with inappropriate hospital days.

PubMed

Huet, Bernard; Cauterman, Maxime

2005-01-01

Several studies of inappropriate (in the sense of the AEP) hospital days highlighted associations between two factors (rate of inappropriateness and reasons for inappropriateness, rate of inappropriateness and appropriate setting of care,..). The aim of this communication is to present a study on real associations, at constant factor, between five factors associated with hospital inappropriate days: medical management process, reason for inappropriateness, scheduled admission, rate of inappropriateness, length of stay. We used the European version of Appropriateness Evaluation Protocol for evaluation of inappropriate days and the French protocol ;for analysis of inappropriate days. The study set in three Parisian hospitals, four clinical departments, three specialities. 523 patients were included in the study, 5663 days were evaluated on a wide variety of pathologies: 27 Medical Management Processes. Results show that there are real associations (elimination of transitive associations) between five factors : medical management process and discharge processes, reason for inappropriateness, scheduled admission, rate of inappropriate days, length of stay. Multiple Correspondence Analysis on all "groups of contiguous days related with the same reason for inappropriateness" shows five profiles of queues integrating various medical management processes.

Development of an estimation model for the evaluation of the energy requirement of dilute acid pretreatments of biomass.

PubMed

Mafe, Oluwakemi A T; Davies, Scott M; Hancock, John; Du, Chenyu

2015-01-01

This study aims to develop a mathematical model to evaluate the energy required by pretreatment processes used in the production of second generation ethanol. A dilute acid pretreatment process reported by National Renewable Energy Laboratory (NREL) was selected as an example for the model's development. The energy demand of the pretreatment process was evaluated by considering the change of internal energy of the substances, the reaction energy, the heat lost and the work done to/by the system based on a number of simplifying assumptions. Sensitivity analyses were performed on the solid loading rate, temperature, acid concentration and water evaporation rate. The results from the sensitivity analyses established that the solids loading rate had the most significant impact on the energy demand. The model was then verified with data from the NREL benchmark process. Application of this model on other dilute acid pretreatment processes reported in the literature illustrated that although similar sugar yields were reported by several studies, the energy required by the different pretreatments varied significantly.

Both Trace and Delay Conditioning of Evaluative Responses Depend on Contingency Awareness

ERIC Educational Resources Information Center

Kattner, Florian; Ellermeier, Wolfgang; Tavakoli, Paniz

2012-01-01

Whereas previous evaluative conditioning (EC) studies produced inconsistent results concerning the role of contingency knowledge, there are classical eye-blink conditioning studies suggesting that declarative processes are involved in trace conditioning but not in delay conditioning. In two EC experiments pairing neutral sounds (conditioned…

EVALUATION OF VOLATILE ORGANIC EMISSIONS DATA FOR NONPROCESS SOLVENT USE IN COMMERCIAL AND INDUSTRIAL BUSINESS CATEGORIES

EPA Science Inventory

The report gives results of a project to gather and evaluate existing data on nonprocess solvents; i.e., products not directly incorporated into specific industrial processes. This information is to be incorporated into an overall inventory project assessing consumer product use ...

CONTROL OF SULFUR EMISSIONS FROM OIL SHALE RETORTING USING SPEND SHALE ABSORPTION

EPA Science Inventory

The paper gives results of a detailed engineering evaluation of the potential for using an absorption on spent shale process (ASSP) for controlling sulfur emissions from oil shale plants. The evaluation analyzes the potential effectiveness and cost of absorbing SO2 on combusted s...