Feasibility of commercial space manufacturing, production of pharmaceuticals. Volume 3: Product data

NASA Technical Reports Server (NTRS)

1978-01-01

The feasibility of commercial manufacturing of pharmaceuticals in space is analyzed and the study results are presented. The chronology of the study process is discussed. The separation of serum proteins by the continuous flow electrophoresis process is investigated. The production requirements of twelve candidate products including antihemophilic factor, beta cells, erythropoietin, epidermal growth factor, alpha-1-antitrypsin, and interferon are evaluated.

Feasibility Study of the Geotextile Waste Filtration Unit.

DTIC Science & Technology

2000-02-10

Treatment Module 3-32 Figure 3-20. THE SCHEMATIC OF THE MOVING BED BIOFILM REACTOR ( MBBR ) 3൪ Figure 4-1. The Original Distributed Concept for WFUs...Moving Bed Biofilm Reactor ( MBBR ) process appears to be one of the most feasible processes available to meet Force Provider liquid waste stream...Moving Bed Biofilm Reactor ( MBBR ) process was then examined.31 In this system, both activated sludge and fixed-film processes occur in a bioreactor

Study of the joining of polycarbonate panels in butt joint configuration through friction stir welding

NASA Astrophysics Data System (ADS)

Astarita, Antonello; Boccarusso, Luca; Carrino, Luigi; Durante, Massimo; Minutolo, Fabrizio Memola Capece; Squillace, Antonino

2018-05-01

Polycarbonate sheets, 3 mm thick, were successfully friction stir welded in butt joint configuration. Aiming to study the feasibility of the process and the influence of the process parameters joints under different processing conditions, obtained by varying the tool rotational speed and the tool travel speed, were realized. Tensile tests were carried out to characterize the joints. Moreover the forces arising during the process were recorded and carefully studied. The experimental outcomes proved the feasibility of the process when the process parameters are properly set, joints retaining more than 70% of the UTS of the base material were produced. The trend of the forces was described and explained, the influence of the process parameters was also introduced.

Testing the Feasibility of Fidelity Evaluation in a Multisite, Multiprogram Initiative

ERIC Educational Resources Information Center

Cornish, Disa Lubker; Losch, Mary E.; Avery, Mitchell

2016-01-01

Monitoring fidelity of implementation is a critical task when initiating evidence-based programs. This pilot study sought to identify best practices in a fidelity monitoring process and determine the feasibility of continuing a fidelity monitoring process with a multisite, multiprogram initiative. A fidelity log was created for each of 11…

Peer-Led, School-Based Nutrition Education for Young Adolescents: Feasibility and Process Evaluation of the TEENS Study.

ERIC Educational Resources Information Center

Story, Mary; Lytle, Leslie A.; Birnbaum, Amanda S.; Perry, Cheryl L.

2002-01-01

Describes the feasibility of the peer leader component of a school-based nutrition intervention for young adolescents designed to increase fruit and vegetable consumption and lower fat consumption. Results from a multicomponent process evaluation involving participant feedback, observation, and teacher ratings and interviews indicated that…

Using TELOS for the planning of the information system audit

NASA Astrophysics Data System (ADS)

Drljaca, D. P.; Latinovic, B.

2018-01-01

This paper intent is to analyse different aspects of information system audit and to synthesise them into the feasibility study report in order to facilitate decision making and planning of information system audit process. The TELOS methodology provides a comprehensive and holistic review for making feasibility study in general. This paper examines the use of TELOS in the identification of possible factors that may influence the decision on implementing information system audit. The research question relates to TELOS provision of sufficient information to decision makers to plan an information system audit. It was found that the TELOS methodology can be successfully applied in the process of approving and planning of information system audit. The five aspects of the feasibility study, if performed objectively, can provide sufficient information to decision makers to commission an information system audit, and also contribute better planning of the audit. Using TELOS methodology can assure evidence-based and cost-effective decision-making process and facilitate planning of the audit. The paper proposes an original approach, not examined until now. It is usual to use TELOS for different purposes and when there is a need for conveying of the feasibility study, but not in the planning of the information system audit. This gives originality to the paper and opens further research questions about evaluation of the feasibility study and possible research on comparative and complementary methodologies.

100-F Target Analyte List Development for Soil

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ovink, R.

2012-09-18

This report documents the process used to identify source area target analytes in support of the 100-F Area remedial investigation/feasibility study (RI/FS) addendum to the Integrated 100 Area Remedial Investigation/Feasibility Study Work Plan (DOE/RL-2008-46, Rev. 0).

100-K Target Analyte List Development for Soil

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ovink, R.

2012-09-18

This report documents the process used to identify source area target analytes in support of the 100-K Area remedial investigation/feasibility study (RI/FS) addendum to the Integrated 100 Area Remedial Investigation/Feasibility Study Work Plan (DOE/RL-2008-46, Rev. 0).

Implementing a knowledge translation intervention in long-term care: feasibility results from the Vitamin D and Osteoporosis Study (ViDOS).

PubMed

Kennedy, Courtney C; Thabane, Lehana; Ioannidis, George; Adachi, Jonathan D; Papaioannou, Alexandra

2014-12-01

To evaluate the feasibility of implementing an interdisciplinary, multifaceted knowledge translation intervention within long-term care (LTC) and to identify any challenges that should be considered in designing future studies. Cluster randomized controlled trial. Forty LTC homes across the province of Ontario, Canada. LTC teams composed of physicians, nurses, pharmacists, and other staff. Cluster-level feasibility measures, including recruitment, retention, data completion, and participation in the intervention. A process evaluation was completed by directors of care indicating which process/policy changes had been implemented. Recruitment and retention rates were 22% and 63%, respectively. Good fidelity with the intervention was achieved, including attendance at educational meetings. After ViDOS, 7 process indicators were being newly implemented by more than 50% of active intervention homes. Despite recruitment and retention challenges, the multifaceted intervention produced a number of policy/process changes and had good intervention fidelity. This study is registered at ClinicalTrials.gov NCT01398527. Copyright © 2014. Published by Elsevier Inc.

The Process, Outcomes, and Challenges of Feasibility Studies Conducted in Partnership With Stakeholders: A Health Intervention for Women Survivors of Intimate Partner Violence

PubMed Central

Wuest, Judith; Merritt-Gray, Marilyn; Dubé, Norma; Hodgins, Marilyn J; Malcolm, Jeannie; Majerovich, Jo Ann; Scott-Storey, Kelly; Ford-Gilboe, Marilyn; Varcoe, Colleen

2015-01-01

Feasibility studies play a crucial role in determining whether complex, community-based interventions should be subject to efficacy testing. Reports of such studies often focus on efficacy potential but less often examine other elements of feasibility, such as acceptance by clients and professionals, practicality, and system integration, which are critical to decisions for proceeding with controlled efficacy testing. Although stakeholder partnership in feasibility studies is widely suggested to facilitate the research process, strengthen relevance, and increase knowledge transfer, little is written about how this occurs or its consequences and outcomes. We began to address these gaps in knowledge in a feasibility study of a health intervention for women survivors of intimate partner violence (IPV) conducted in partnership with policy, community and practitioner stakeholders. We employed a mixed-method design, combining a single-group, pre-post intervention study with 52 survivors of IPV, of whom 42 completed data collection, with chart review data and interviews of 18 purposefully sampled participants and all 9 interventionists. We assessed intervention feasibility in terms of acceptability, demand, practicality, implementation, adaptation, integration, and efficacy potential. Our findings demonstrate the scope of knowledge attainable when diverse elements of feasibility are considered, as well as the benefits and challenges of partnership. The implications of diverse perspectives on knowledge transfer are discussed. Our findings show the importance of examining elements of feasibility for complex community-based health interventions as a basis for determining whether controlled intervention efficacy testing is justified and for refining both the intervention and the research design. © 2015 The Authors. Research in Nursing & Health published by Wiley Periodicals, Inc. PMID:25594917

GUIDE FOR CONDUCTING TREATABILITY STUDIES UNDER CERCLA

EPA Science Inventory

Systematically conducted, well-documented treatability studies are an important component of the removal process, remedial investigation/ feasibility study (RI/FS) process and the remedial design/remedial action (RD/RA) process under the Comprehensive Environmental Response...

Conducting feasibilities in clinical trials: an investment to ensure a good study.

PubMed

Rajadhyaksha, Viraj

2010-07-01

Conducting clinical trial feasibility is one of the first steps in clinical trial conduct. This process includes assessing internal and environmental capacity, alignment of the clinical trial in terms of study design, dose of investigational product, comparator, patient type, with the local environment and assessing potential of conducting clinical trial in a specific country. A robust feasibility also ensures a realistic assessment and capability to conduct the clinical trial. For local affiliates of pharmaceutical organizations, and contract research organizations, this is a precursor to study placement and influences the decision of study placement. This article provides details on different types of feasibilities, information which is to be included and relevance of each. The article also aims to provide practical hands-on suggestions to make feasibilities more realistic and informative.

A Feasibility Study of Youth Apprenticeship in Arkansas.

ERIC Educational Resources Information Center

Jobs for the Future, Inc., West Somerville, MA.

A study assessed the feasibility and attractiveness of youth apprenticeship in Arkansas in over 80 interviews with employers in 5 key Arkansas industries and occupations. They were allied health, food processing (equipment repair and maintenance and lab technician/quality control), information services, metalworking, and self-employment and…

100-N Area Decision Unit Target Analyte List Development for Soil

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ovink, R.

2012-09-18

This report documents the process used to identify source area target analytes in support of the 100-N Area remedial investigation/feasibility study (RI/FS) addendum to the Integrated 100 Area Remedial Investigation/Feasibility Study Work Plan (DOE/RL-2008-46, Rev. 0).

A preliminary study of the feasibility of detecting the floating macrophytes by means of digital processing of MSS/LANDSAT data

NASA Technical Reports Server (NTRS)

Valeriano, D. D. (Principal Investigator)

1984-01-01

The feasibility of mapping the floating macrophytes (mostly water hyacinth: (Eichornia crassipes) in the Salto Grande reservoir in Americana, SP, by means of digital processing of MSS/LANDSAT data is described. The area occupied by the macrophytes was extracted by exclusion after the merging of two thematic masks representing the area of vegetation free water surface. One of the masks was obtained from a date when the vegetal cover is insignificant, while the other represents a large infestation episode. The utilization of digital processing of MSS/LANDSAT data techniques for the documentation of macrophytes infestation is feasible only when the phenomenon occurs in large areas.

Feasibility study ASCS remote sensing/compliance determination system

NASA Technical Reports Server (NTRS)

Duggan, I. E.; Minter, T. C., Jr.; Moore, B. H.; Nosworthy, C. T.

1973-01-01

A short-term technical study was performed by the MSC Earth Observations Division to determine the feasibility of the proposed Agricultural Stabilization and Conservation Service Automatic Remote Sensing/Compliance Determination System. For the study, the term automatic was interpreted as applying to an automated remote-sensing system that includes data acquisition, processing, and management.

7 CFR 277.18 - Establishment of an Automated Data Processing (ADP) and Information Retrieval System.

Code of Federal Regulations, 2010 CFR

2010-01-01

... activities and expenditures in relation to the approved Planning APD or Implementation APD. An APDU may also... organizations other than the State agency to perform such tasks as feasibility studies, system studies, system... requirements of § 277.18(c). Feasibility Study means a preliminary study to determine whether it is...

Producing Hardwood Dimension Parts Directly From Logs: An Economic Feasibility Study

Treesearch

Wenjie Lin; D. Earl Kline; Philip A. Araman; Janice K. Wiedenbeck

1995-01-01

The economic feasibility and profitability of a direct processing system for converting Factory Grades 2 and 3 red oak logs directly into rough dimension parts were evaluated. New present value (NPV) and internal rate of return (IRR) were used as the measurement of economic feasibility, and return on sales (ROS) was used as the measurement of profitability. NPV and IRR...

Statistical process control: A feasibility study of the application of time-series measurement in early neurorehabilitation after acquired brain injury.

PubMed

Markovic, Gabriela; Schult, Marie-Louise; Bartfai, Aniko; Elg, Mattias

2017-01-31

Progress in early cognitive recovery after acquired brain injury is uneven and unpredictable, and thus the evaluation of rehabilitation is complex. The use of time-series measurements is susceptible to statistical change due to process variation. To evaluate the feasibility of using a time-series method, statistical process control, in early cognitive rehabilitation. Participants were 27 patients with acquired brain injury undergoing interdisciplinary rehabilitation of attention within 4 months post-injury. The outcome measure, the Paced Auditory Serial Addition Test, was analysed using statistical process control. Statistical process control identifies if and when change occurs in the process according to 3 patterns: rapid, steady or stationary performers. The statistical process control method was adjusted, in terms of constructing the baseline and the total number of measurement points, in order to measure a process in change. Statistical process control methodology is feasible for use in early cognitive rehabilitation, since it provides information about change in a process, thus enabling adjustment of the individual treatment response. Together with the results indicating discernible subgroups that respond differently to rehabilitation, statistical process control could be a valid tool in clinical decision-making. This study is a starting-point in understanding the rehabilitation process using a real-time-measurements approach.

Feasibility study: Assess the feasibility of siting a monitored retrievable storage facility. Phase 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, J.W.

1993-08-01

The purpose of phase one of this study are: To understand the waste management system and a monitored retrievable storage facility; and to determine whether the applicant has real interest in pursuing the feasibility assessment process. Contents of this report are: Generating electric power; facts about exposure to radiation; handling storage, and transportation techniques; description of a proposed monitored retrievable storage facility; and benefits to be received by host jurisdiction.

78 FR 57624 - Availability of a Draft Integrated Feasibility Report (Feasibility Study/Environmental Impact...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-19

... Restoration Study, Los Angeles County, CA, for review and comment. The study evaluates alternatives for the... physical processes such as a more natural hydrologic and hydraulic regime that reconnects the river to... on November 28, 2008 (73 FR 72455). DATES: The Draft IFR is available for a 45-day review period from...

Feasibility study analysis for multi-function dual energy oven (case study: tapioca crackers small medium enterprise)

NASA Astrophysics Data System (ADS)

Soraya, N. W.; El Hadi, R. M.; Chumaidiyah, E.; Tripiawan, W.

2017-12-01

Conventional drying process is constrained by weather (cloudy / rainy), and requires wide drying area, and provides low-quality product. Multi-function dual energy oven is the appropriate technology to solve these problems. The oven uses solar thermal or gas heat for drying various type of products, including tapioca crackers. Investment analysis in technical, operational, and financial aspects show that the multi-function dual energy oven is feasible to be implemented for small medium enterprise (SME) processing tapioca crackers.

Process research of non-CZ silicon material

NASA Technical Reports Server (NTRS)

1983-01-01

High risk, high payoff research areas associated with the Westinghouse process for producing photovoltaic modules using non- CZ sheet material were investigated. All work was performed using dendritic web silicon. The following tasks are discussed and associated technical results are given: (1) determining the technical feasibility of forming front and back junctions in non-CT silicon using dopant techniques; (2) determining the feasibility of forming a liquid applied diffusion mask to replace the more costly chemical vapor deposited SiO2 diffusion mask; (3) determining the feasibility of applying liquid anti-reflective solutions using meniscus coating equipment; (4) studying the production of uniform, high efficiency solar cells using ion implanation junction formation techniques; and (5) quantifying cost improvements associated with process improvements.

Historic Schools: Renovation vs. Replacement & the Role of a Feasibility Study.

ERIC Educational Resources Information Center

National Trust for Historic Preservation, Washington, DC.

Weighing the pros and cons of renovating a historic neighborhood school or building a new one takes preservation "know-how," experience, and creativity. The potential for renovation is routinely dismissed without full consideration of the facts and long-term implications. Central to this decision-making process is the feasibility study,…

Improving Silent Reading Performance through Feedback on Eye Movements: A Feasibility Study

ERIC Educational Resources Information Center

Korinth, Sebastian P.; Fiebach, Christian J.

2018-01-01

This feasibility study investigated if feedback about individual eye movements, reflecting varying word processing stages, can improve reading performance. Twenty-five university students read 90 newspaper articles during 9 eye-tracking sessions. Training group participants (n = 12) were individually briefed before each session, which eye movement…

Feasibility study of solid surface subreflector production techniques

NASA Technical Reports Server (NTRS)

1982-01-01

The principal effort was to study technical feasibility and cost aspects of the production technique of spin forming a subreflector reflective surface to a desired surface of revolution, back the surface with fiberglass to stabilize it sufficiently so that it may be machined to the target surface tolerance of .008 inches Root Mean Square (RMS) with a goal of .003 inches RMS. To verify this production technique, analyses was performed to define the production procedure. A price estimate for a 150 inch diameter subreflector for a 34 meter cassegrain antenna. During this feasibility study, numerous production processes were evaluated theoretically as production approaches for single surface, non-welded subreflectors. The first successful was the principal process of spin forming the reflective surface, backing with fiberglass and machining to a final contour. The second successful process was spin forming or bump forming a thicker reflective surface, with an integral (welded in) structure as a backing and machining the mounting pads and reflector to a final configuration.

Conducting pilot and feasibility studies.

PubMed

Cope, Diane G

2015-03-01

Planning a well-designed research study can be tedious and laborious work. However, this process is critical and ultimately can produce valid, reliable study findings. Designing a large-scale randomized, controlled trial (RCT)-the gold standard in quantitative research-can be even more challenging. Even the most well-planned study potentially can result in issues with research procedures and design, such as recruitment, retention, or methodology. One strategy that may facilitate sound study design is the completion of a pilot or feasibility study prior to the initiation of a larger-scale trial. This article will discuss pilot and feasibility studies, their advantages and disadvantages, and implications for oncology nursing research. 
.

Feasibility study report: Area of Contamination (AOC) 43J. (Fort Devens, Groups 2 and 7 sites). Final feasibility study report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-06-06

The U.S. Army Environmental Center directed ABB Environmental Services, Inc. (ABB-ES), under Contract No. DAAA15-91-D-0008, to conduct a Remedial Investigation (RI) and Feasibility Study (FS) to address the contamination of soil and groundwater at Area of Contamination (AOC) 43J at Fort Devens, Massachusetts. This FS Report is prepared as part of the FS process in accordance with the 1988 U.S. Environmental Protection Agency (USEPA) guidance document entitled Guidance for Conducting Remedial Investigations and Feasibility Studies under CERCLA. The purpose of the FS Report is to initially identify and screen potentially feasible alternatives to control human health and environmental risks atmore » AOC 43J. Following this screening, the FS Report presents a detailed analysis and comparative analysis of the retained alternatives.« less

Feasibility study for thermal treatment of solid tire wastes in Bangladesh by using pyrolysis technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Islam, M.R., E-mail: mrislam1985@yahoo.com; Joardder, M.U.H.; Hasan, S.M.

2011-09-15

In this study on the basis of lab data and available resources in Bangladesh, feasibility study has been carried out for pyrolysis process converting solid tire wastes into pyrolysis oils, solid char and gases. The process considered for detailed analysis was fixed-bed fire-tube heating pyrolysis reactor system. The comparative techno-economic assessment was carried out in US$ for three different sizes plants: medium commercial scale (144 tons/day), small commercial scale (36 tons/day), pilot scale (3.6 tons/day). The assessment showed that medium commercial scale plant was economically feasible, with the lowest unit production cost than small commercial and pilot scale plants formore » the production of crude pyrolysis oil that could be used as boiler fuel oil and for the production of upgraded liquid-products.« less

A feasibility study: Forest Fire Advanced System Technology (FFAST)

NASA Technical Reports Server (NTRS)

Mcleod, R. G.; Martin, T. Z.; Warren, J.

1983-01-01

The National Aeronautics and Space Administration/Jet Propulsion Laboratory and the United States Department of Agriculture Forest Service completed a feasibility study that examined the potential uses of advanced technology in forest fires mapping and detection. The current and future (1990's) information needs in forest fire management were determined through interviews. Analysis shows that integrated information gathering and processing is needed. The emerging technologies that were surveyed and identified as possible candidates for use in an end to end system include ""push broom'' sensor arrays, automatic georeferencing, satellite communication links, near real or real time image processing, and data integration. Matching the user requirements and the technologies yielded a ""strawman'' system configuration. The feasibility study recommends and outlines the implementation of the next phase for this project, a two year, conceptual design phase to define a system that warrants continued development.

Research and development of low cost processes for integrated solar arrays. Final report, April 15, 1974--January 14, 1976

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graham, C.D.; Kulkarni, S.; Louis, E.

1976-05-01

Results of a program to study process routes leading to a low cost large area integrated silicon solar array manufacture for terrestrial applications are reported. Potential processes for the production of solar-grade silicon are evaluated from thermodynamic, economic, and technical feasibility points of view. Upgrading of the present arc-furnace process is found most favorable. Experimental studies of the Si/SiF/sub 4/ transport and purification process show considerable impurity removal and reasonable transport rates. Silicon deformation experiments indicate production of silicon sheet by rolling at 1350/sup 0/C is feasible. Significant recrystallization by strain-anneal technique has been observed. Experimental recrystallization studies using anmore » electron beam line source are discussed. A maximum recrystallization velocity of approximately 9 m/hr is calculated for silicon sheet. A comparative process rating technique based on detailed cost analysis is presented.« less

Feasibility study on the modernization and expansion of the Tema Oil Refinery: Appendix 1, Part A. REFOP reports. Export trade information (Draft)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-04-01

The Tema Oil Refinery, which was commissioned in 1963, is a simple hydroskimming plant which processes crude oil into LPG, gasoline, kerosene, gasoil, and fuel oil. It is the only petroleum refinery in Ghana. Over the years, some of the equipment in the refinery has deteriorated or become obsolete, necessitating major rehabilitation. A feasibility study is investigating the modernization and expansion of the refinery to meet projected market demands until the year 2005. This report is appendix I, part A to the feasibility study.

Feasibility study on the modernization and expansion of the Tema Oil Refinery: Appendix 1, Part B. REFOP reports (Final report). Export trade information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-04-01

The Tema Oil Refinery, which was commissioned in 1963, is a simple hydroskimming plant which processes crude oil into LPG, gasoline, kerosene, gasoil, and fuel oil. It is the only petroleum refinery in Ghana. Over the years, some of the equipment in the refinery has deteriorated or become obsolete, necessitating major rehabilitation. A feasibility study is investigating the modernization and expansion of the refinery to meet projected market demands until the year 2005. This report is appendix I, part B to the feasibility study.

Methods for destriping Landsat Thematic Mapper images - A feasibility study for an online destriping process in the Thematic Mapper Image Processing System (TIPS)

NASA Technical Reports Server (NTRS)

Poros, D. J.; Peterson, C. J.

1985-01-01

Methods for destriping TM images and results of the application of these methods to selected TM scenes with sensor and scan striping, which was not removed by the radiometric correction during the TM Archive Generation Phase in TIPS, are presented. These methods correct only for gain and offset differences between detectors over many image lines and do not consider within-line effects. The feasibility of implementing a destriping process online in TIPS is also described.

GUIDE TO CONDUCTING TREATABILITY STUDIES UNDER CERCLA: SOIL WASHING - INTERIM GUIDANCE

EPA Science Inventory

Systematically conducted, well-documented treatability studies are an important component of the remedial investigation/feasibility study (RI/FS) process and the remedial design/remedial action (RD/RA) process under the Comprehensive Environmental Response, Compensation, and Liab...

GUIDE FOR CONDUCTING TREATABILITY STUDIES UNDER CERCLA: AEROBIC BIODEGRADATION REMEDY SCREENING

EPA Science Inventory

Systematically conducted, well-documented treatability studies are an important component of the remedial investigation/feasibility study (KU FS) process and the remedial design/remedial action (RD/RA) process under the Comprehensive Environmental Response, Compensation, and L...

GUIDE FOR CONDUCTING TREATABILITY STUDIES UNDER CERCLA: SOLVENT EXTRACTION - INTERIM GUIDANCE

EPA Science Inventory

Systematically conducted, well-documented treatability studies are an important component of the remedial investigation/feasibility study (RI/FS) process and the remedial design/remedial action (RD/RA) process under the Comprehensive Environmental Response, Compensation and Liabi...

GUIDE FOR CONDUCTING TREATABILITY STUDIES UNDER CERCLA: THERMAL DESORPTION - INTERIM GUIDANCE

EPA Science Inventory

Systematically conducted, well-documented treatability studies are an important component of the remedial investigation/feasibility study (RI/FS) process and the remedial design remedial action (RD/RA) process under the Comprehensive Environmental Response, Compensation, and Liab...

Extraction of astaxanthin from microalgae: process design and economic feasibility study

NASA Astrophysics Data System (ADS)

Zgheib, Nancy; Saade, Roxana; Khallouf, Rindala; Takache, Hosni

2018-03-01

In this work, the process design and the economic feasibility of natural astaxanthin extraction fromHaematococcus pluvialisspecies have been reported. Complete process drawing of the process was first performed, and then the process was designed including five main steps being the harvesting process, the cell disruption, the spray drying, the supercritical CO2extraction and the anaerobic digestion. The major components of the facility would include sedimentation tanks, a disk stack centrifuge, a bed miller, a spray dryer, a multistage compressor, an extractor, a pasteurizer and a digester. All units have been sized assuming a 10 kg/h of dried biomass as a feedstock to produce nearly 2592 kg of astaxanthin per year. The investment payback time and the return on investment were all estimated for different market prices of astaxanthin. Based on the results the production process was found to become economically feasible for a market price higher than 1500/Kg. Also, a payback period of 1 year and an ROI equal to 113% was estimated for an astaxanthin market price equal to 6000/Kg.

Dynamic biogas upgrading based on the Sabatier process: thermodynamic and dynamic process simulation.

PubMed

Jürgensen, Lars; Ehimen, Ehiaze Augustine; Born, Jens; Holm-Nielsen, Jens Bo

2015-02-01

This study aimed to investigate the feasibility of substitute natural gas (SNG) generation using biogas from anaerobic digestion and hydrogen from renewable energy systems. Using thermodynamic equilibrium analysis, kinetic reactor modeling and transient simulation, an integrated approach for the operation of a biogas-based Sabatier process was put forward, which was then verified using a lab scale heterogenous methanation reactor. The process simulation using a kinetic reactor model demonstrated the feasibility of the production of SNG at gas grid standards using a single reactor setup. The Wobbe index, CO2 content and calorific value were found to be controllable by the H2/CO2 ratio fed the methanation reactor. An optimal H2/CO2 ratio of 3.45-3.7 was seen to result in a product gas with high calorific value and Wobbe index. The dynamic reactor simulation verified that the process start-up was feasible within several minutes to facilitate surplus electricity use from renewable energy systems. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Feasibility of Systems Thinking in Biology Education

ERIC Educational Resources Information Center

Boersma, Kerst; Waarlo, Arend Jan; Klaassen, Kees

2011-01-01

Systems thinking in biology education is an up and coming research topic, as yet with contrasting feasibility claims. In biology education systems thinking can be understood as thinking backward and forward between concrete biological objects and processes and systems models representing systems theoretical characteristics. Some studies claim that…

Do feasibility studies contribute to, or avoid, waste in research?

PubMed Central

Hejdenberg, Jennie; Hinrichs-Krapels, Saba; Armstrong, David

2018-01-01

In the context of avoiding research waste, the conduct of a feasibility study before a clinical trial should reduce the risk that further resources will be committed to a trial that is likely to ‘fail’. However, there is little evidence indicating whether feasibility studies add to or reduce waste in research. Feasibility studies funded by the National Institute for Health Research’s (NIHR) Research for Patient Benefit (RfPB) programme were examined to determine how many had published their findings, how many had applied for further funding for a full trial and the timeframe in which both of these occurred. A total of 120 feasibility studies which had closed by May 2016 were identified and each Principal Investigator (PI) was sent a questionnaire of which 89 responses were received and deemed suitable for analysis. Based on self reported answers from the PIs a total of 57 feasibility studies were judged as feasible, 20 were judged not feasible and for 12 it was judged as uncertain whether a full trial was feasible. The RfPB programme had spent approximately £19.5m on the 89 feasibility studies of which 16 further studies had been subsequently funded to a total of £16.8m. The 20 feasibility studies which were judged as not feasible potentially saved up to approximately £20m of further research funding which would likely to have not completed successfully. The average RfPB feasibility study took 31 months (range 18 to 48) to complete and cost £219,048 (range £72,031 to £326,830) and the average full trial funded from an RfPB feasibility study took 42 months (range 26 to 55) to complete and cost £1,163,996 (range £321,403 to £2,099,813). The average timeframe of feasibility study and full trial was 72 months (range 56 to 91), however in addition to this time an average of 10 months (range -7 to 29) was taken between the end of the feasibility study and the application for the full trial, and a further average of 18 months (range 13 to 28) between the application for the full trial and the start of the full trial. Approximately 58% of the 89 feasibility studies had published their findings with the majority of the remaining studies still planning to publish. Due to the long time frames involved a number of studies were still in the process of publishing the feasibility findings and/or applying for a full trial. Feasibility studies are potentially useful at avoiding waste and de-risking funding investments of more expensive full trials, however there is a clear time delay and therefore some potential waste in the existing research pathway. PMID:29684043

Do feasibility studies contribute to, or avoid, waste in research?

PubMed

Morgan, Ben; Hejdenberg, Jennie; Hinrichs-Krapels, Saba; Armstrong, David

2018-01-01

In the context of avoiding research waste, the conduct of a feasibility study before a clinical trial should reduce the risk that further resources will be committed to a trial that is likely to 'fail'. However, there is little evidence indicating whether feasibility studies add to or reduce waste in research. Feasibility studies funded by the National Institute for Health Research's (NIHR) Research for Patient Benefit (RfPB) programme were examined to determine how many had published their findings, how many had applied for further funding for a full trial and the timeframe in which both of these occurred. A total of 120 feasibility studies which had closed by May 2016 were identified and each Principal Investigator (PI) was sent a questionnaire of which 89 responses were received and deemed suitable for analysis. Based on self reported answers from the PIs a total of 57 feasibility studies were judged as feasible, 20 were judged not feasible and for 12 it was judged as uncertain whether a full trial was feasible. The RfPB programme had spent approximately £19.5m on the 89 feasibility studies of which 16 further studies had been subsequently funded to a total of £16.8m. The 20 feasibility studies which were judged as not feasible potentially saved up to approximately £20m of further research funding which would likely to have not completed successfully. The average RfPB feasibility study took 31 months (range 18 to 48) to complete and cost £219,048 (range £72,031 to £326,830) and the average full trial funded from an RfPB feasibility study took 42 months (range 26 to 55) to complete and cost £1,163,996 (range £321,403 to £2,099,813). The average timeframe of feasibility study and full trial was 72 months (range 56 to 91), however in addition to this time an average of 10 months (range -7 to 29) was taken between the end of the feasibility study and the application for the full trial, and a further average of 18 months (range 13 to 28) between the application for the full trial and the start of the full trial. Approximately 58% of the 89 feasibility studies had published their findings with the majority of the remaining studies still planning to publish. Due to the long time frames involved a number of studies were still in the process of publishing the feasibility findings and/or applying for a full trial. Feasibility studies are potentially useful at avoiding waste and de-risking funding investments of more expensive full trials, however there is a clear time delay and therefore some potential waste in the existing research pathway.

Innovative Method for Separating Phosphorus and Iron from High-Phosphorus Oolitic Hematite by Iron Nugget Process

NASA Astrophysics Data System (ADS)

Han, Hongliang; Duan, Dongping; Wang, Xing; Chen, Siming

2014-10-01

This study puts forward a new method to separate phosphorus and iron from high-phosphorus oolitic hematite through iron nuggets process. Firstly, the physical, chemical, and microscopic characteristics of high-phosphorus oolitic hematite are investigated. Then, the reaction mechanisms of high-phosphorus hematite together with feasibility to separating phosphorus and iron by iron nugget process are discussed. Meanwhile, the experiments of high-phosphorus hematite used in rotary hearth furnace iron nugget processes are studied as well. The results indicate that the iron nugget process is a feasible and efficient method for iron and phosphorus separation of high-phosphorus oolitic hematite. The phosphorus content in iron nuggets is relatively low. Through the optimization of process parameters, the lowest of phosphorus in iron nuggets is 0.22 pct, the dephosphorization rate is above 86 pct, and the recovery of Fe is above 85 pct by the iron nugget process. This study aims to provide a theoretical and technical basis for economical and rational use of high-phosphorus oolitic hematite.

A cost and returns evaluation of alternative dairy products to determine capital investment and operational feasibility of a small-scale dairy processing facility.

PubMed

Becker, K M; Parsons, R L; Kolodinsky, J; Matiru, G N

2007-05-01

This study examines the economic feasibility of 50- and 500-cow dairy processing facilities for fluid milk, yogurt, and cheese. Net present value and internal rate of return calculations for projected costs and returns over a 10-yr period indicate that larger yogurt and cheese processing plants offer the most profitable prospects, whereas a smaller yogurt plant would break even. A smaller cheese plant would have insufficient returns to cover the cost of capital, and fluid milk processing at either scale is economically infeasible. Economic success in processing is greatly contingent upon individual business, financial management, and marketing skills.

Building expert agreement on the importance and feasibility of workplace health promotion interventions for nurses and midwives: A modified Delphi consultation.

PubMed

Perry, Lin; Nicholls, Rachel; Duffield, Christine; Gallagher, Robyn

2017-11-01

To use a Delphi panel to determine the relative importance and feasibility of workplace health promotion interventions to promote and support the health of the Australian nursing and midwifery workforce. The nursing workforce experiences rates of ill health above that of other workforces, yet there is little investment in workplace health promotion. The study used a modified Delphi design conducted between September and November 2015. Eleven of 19 purposively selected expert panellists discussed, rated and provided feedback through two rounds of an electronic questionnaire about the relative importance and feasibility of 46 workplace health promotion interventions and processes for nurses and midwives. Scores for importance and feasibility were calculated and ranked and a composite score of importance multiplied by feasibility. Mental health strategies were prioritized as the most important and feasible of the intervention topics, followed closely by healthy eating and physical activity interventions; smoking cessation ranked lowest. The most highly ranked interventions targeted healthy eating, stress management and resilience training. Highest ranked processes to support development of a healthy work environment included intersectoral collaboration and employee wellness groups. Study findings prompt consideration of health promotion opportunities to support nurses' health and well-being. Findings identified key workplace health promotion priorities and provide direction for policy makers and managers to promote nursing and midwifery workforce health. © 2017 John Wiley & Sons Ltd.

A Flexible Pilot-Scale Setup for Real-Time Studies in Process Systems Engineering

ERIC Educational Resources Information Center

Panjapornpon, Chanin; Fletcher, Nathan; Soroush, Masoud

2006-01-01

This manuscript describes a flexible, pilot-scale setup that can be used for training students and carrying out research in process systems engineering. The setup allows one to study a variety of process systems engineering concepts such as design feasibility, design flexibility, control configuration selection, parameter estimation, process and…

Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 2: The design process

NASA Technical Reports Server (NTRS)

Gillette, W. B.; Turner, M. J.; Southall, J. W.; Whitener, P. C.; Kowalik, J. S.

1973-01-01

The extent to which IPAD is to support the design process is identified. Case studies of representative aerospace products were developed as models to characterize the design process and to provide design requirements for the IPAD computing system.

Feasibility study in the application of optical signal analysis to non-destructive testing of complex structures

NASA Technical Reports Server (NTRS)

Baker, B.; Brown, H.

1974-01-01

Advantages of the large time bandwidth product of optical processing are presented. Experiments were performed to study the feasibility of the use of optical spectral analysis for detection of flaws in structural elements excited by random noise. Photographic and electronic methods of comparison of complex spectra were developed. Limitations were explored, and suggestions for further work are offered.

Feasibility of Jujube peeling using novel infrared radiation heating technology

USDA-ARS?s Scientific Manuscript database

Infrared (IR) radiation heating has a promising potential to be used as a sustainable and effective method to eliminate the use of water and chemicals in the jujube-peeling process and enhance the quality of peeled products. The objective of this study was to investigate the feasibility of use IR he...

The Feasibility of a Continuous Learning Year Program at Fashion Institute of Technology.

ERIC Educational Resources Information Center

Thomas, George Isaiah

This feasibility study provides the Fashion Institute of Technology with a number of continuous-learning-year calendar choices, along with several suggestions regarding implementation procedures. The nature of the implementation process and the issues confronting the college administrator who is willing to reschedule the college year to facilitate…

Development of website for studying modern physics

NASA Astrophysics Data System (ADS)

Saehana, S.; Wahyono, U.; Darmadi, I. W.; Kendek, Y.; Widyawati, W.

2018-03-01

The purpose of this study is to produce a website in modern physics courses in order to increase student interest in physics learning. To determine the feasibility level of learning media then feasibility test to the product. The feasibility test carried out on the product is divided into three parts: material feasibility test, media feasibility test, and student response test. Based on the results of the test conducted the material obtained an average score of 3.72 and categorized very well. The result of media test that was obtained got the average score of 3.25 and categorized well. The result of the analysis of student's response to the twenty students of class A (fifth semester) of physics education program FKIP UniversitasTadulako obtained an average score of 3.16 with the good category. The results showed that the website developed can be used as one of the learning media that can support the learning process of students.

Membrane treatment of Aqueous Film Forming Foam (AFFF) wastes for recovery of its active ingredients. Final report, Mar 79-Sep 80

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chian, E.S.K.; Wu, T.P.; Rowland, R.W.

1980-10-01

Ultrafiltration (UF) and Reverse Osmosis (RO) treatment of Aqueous Film Forming Foam (AFFF) solutions was investigated to determine the feasibility of employing membrane processes to separate and recover AFFF active ingredients for reuse. Studies were performed on both 6% AFFF in tap-water solutions and on actual wastewaters spiked with 3% or 6% AFFF. The AFFF materials used in this study consisted of Ansul, 3M FC-206, and 3M FC-780. Membrane employed for these studies included Abcor HFD, HFF, HFJ, and HFK tubular ultrafiltration (UF) membranes and a DuPont B-10 reverse osmosis (RO) module. Parameters monitored to represent AFFF ingredients were TOC,more » dissolved solids, surfactants, and % glycol. An attempt was also made to determine fluorocarbons as fluoride. Membrane fluxes were also determined. Results of this study demonstrate the feasibility of employing UF-RO processes to separate and recover the AFFF active ingredients for reuse. Approximately 75% recovery of the AFFF active ingredients as represented by the foam test was attained. An economic analysis of the membrane treatment processes indicates that it is extremely favorable in recovering the AFFF wastewater for reuse. Pilot-scale studies are, however, necessary to fully establish the process feasibilities and economics of the AFFF recovery system.« less

Examination on the use of acoustic emission for monitoring metal forging process: A study using simulation technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mullins, W.M.; Irwin, R.D.; Malas, J.C. III

The aim of this study is to determine the feasibility of using acoustic emission as a monitoring technique for metal forging operations. From the sensor development paradigm proposed by McClean et al. the most likely approach to determining feasibility for application is through signal recognition. For this reason, signature prediction and analysis was chosen to determine the suitability for forging applications.

A model to assess the feasibility of shifting reaction equilibrium by acetone removal in the transamination of ketones using 2-propylamine.

PubMed

Tufvesson, Pär; Bach, Christian; Woodley, John M

2014-02-01

Acetone removal by evaporation has been proposed as a simple and cheap way to shift the equilibrium in the biocatalytic asymmetric synthesis of optically pure chiral amines, when 2-propylamine is used as the amine donor. However, dependent on the system properties, this may or may not be a suitable strategy. To avoid excessive laboratory work a model was used to assess the process feasibility. The results from the current study show that a simple model of the acetone removal dependence on temperature and sparging gas flowrate can be developed and fits the experimental data well. The model for acetone removal was then coupled to a simple model for biocatalyst kinetics and also for loss of substrate ketone by evaporation. The three models were used to simulate the effects of varying the critical process parameters and reaction equilibrium constants (K eq) as well as different substrate ketone volatilities (Henry's constant). The simulations were used to estimate the substrate losses and also the maximum yield that could be expected. The approach was seen to give a clear indication for which target amines the acetone evaporation strategy would be feasible and for which amines it would not. The study also shows the value of a modeling approach in conceptual process design prior to entering a biocatalyst screening or engineering program to assess the feasibility of a particular process strategy for a given target product. © 2013 Wiley Periodicals, Inc.

Perceived impact and feasibility of strategies to improve access to healthy foods in Washington State, USA.

PubMed

Johnson, Donna B; Quinn, Emilee L; Podrabsky, Mary; Beckwith-Stanley, Nadia; Chan, Nadine; Ellings, Amy; Kovacs, Tricia; Lane, Claire

2013-12-01

The present study measured the perceived impact and political and implementation feasibility of state-level policy strategies related to increasing access to healthy foods and limiting unhealthy foods. Potential state-level policy strategies to improve access to healthy foods were identified through a review of evidence-based literature and policy recommendations. Respondents rated the perceived impact and political and implementation feasibility of each policy on a five-point scale using online surveys. Washington State policy process. Forty-nine content experts (national researchers and subject experts), forty policy experts (state elected officials or their staff, gubernatorial or legislative policy analysts) and forty-five other stakeholders (state-level advocates, programme administrators, food producers). In aggregate, respondents rated policy impact and implementation feasibility higher than political feasibility. Policy experts rated policy strategies as less politically feasible compared with content experts (P < 0·02) or other stakeholders (P < 0·001). Eight policy strategies were rated above the median for impact and political and implementation feasibility. These included policies related to nutrition standards in schools and child-care facilities, food distribution systems, urban planning projects, water availability, joint use agreements and breast-feeding supports. Although they may be perceived as potentially impactful, some policies will be more difficult to enact than others. Information about the potential feasibility of policies to improve access to healthy foods can be used to focus limited policy process resources on strategies with the highest potential for enactment, implementation and impact.

Feasibility trial of a film-based educational intervention for increasing boys’ and girls’ intentions to avoid teenage pregnancy: Study protocol☆

PubMed Central

Lohan, Maria; Aventin, Áine; Maguire, Lisa; Clarke, Mike; Linden, Mark; McDaid, Lisa

2014-01-01

The World Health Organisation, amongst others, recognises that adolescent men have a vital yet neglected role in reducing teenage pregnancies and that there is a pressing need for educational interventions designed especially for them. This study seeks to fill this gap by determining the feasibility of conducting an effectiveness trial of the If I Were Jack intervention in post-primary schools. This 4-week intervention aims to increase teenagers’ intentions to avoid unintended pregnancy and addresses gender inequalities in sex education by explicitly focusing on young men. A cluster randomised feasibility trial with embedded process evaluation will determine: recruitment, participation and retention rates; quality of implementation; acceptability and feasibility of the intervention and trial procedures; and costs. PMID:25284956

Feasibility trial of a film-based educational intervention for increasing boys' and girls' intentions to avoid teenage pregnancy: Study protocol.

PubMed

Lohan, Maria; Aventin, Aine; Maguire, Lisa; Clarke, Mike; Linden, Mark; McDaid, Lisa

2014-01-01

The World Health Organisation, amongst others, recognises that adolescent men have a vital yet neglected role in reducing teenage pregnancies and that there is a pressing need for educational interventions designed especially for them. This study seeks to fill this gap by determining the feasibility of conducting an effectiveness trial of the If I Were Jack intervention in post-primary schools. This 4-week intervention aims to increase teenagers' intentions to avoid unintended pregnancy and addresses gender inequalities in sex education by explicitly focusing on young men. A cluster randomised feasibility trial with embedded process evaluation will determine: recruitment, participation and retention rates; quality of implementation; acceptability and feasibility of the intervention and trial procedures; and costs.

Role of Hydrogeology in Professional Environmental Projects

EPA Science Inventory

The purpose of this presentation is to acquaint hydrogeology students how hydrogeological principles are applied in environmental engineering projects. This presentation outlines EPA's Superfund processes of site characterization, feasibility studies, and remediation processes.

The Feasibility of Developing a California Education Longitudinal Study. Policy Report 2002-1

ERIC Educational Resources Information Center

Kaufman, Phillip

2002-01-01

This paper explores the feasibility of collecting longitudinal survey data on students within California schools as a way of supplementing the information California currently collects on its students. Hopefully, this paper will be the start of a process that will lead to the institution of what we in this paper tentatively call the California…

Feasibilities of a Coal-Biomass to Liquids Plant in Southern West Virginia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhattacharyya, Debangsu; DVallance, David; Henthorn, Greg

This project has generated comprehensive and realistic results of feasibilities for a coal-biomass to liquids (CBTL) plant in southern West Virginia; and evaluated the sensitivity of the analyses to various anticipated scenarios and parametric uncertainties. Specifically the project has addressed economic feasibility, technical feasibility, market feasibility, and financial feasibility. In the economic feasibility study, a multi-objective siting model was developed and was then used to identify and rank the suitable facility sites. Spatial models were also developed to assess the biomass and coal feedstock availabilities and economics. Environmental impact analysis was conducted mainly to assess life cycle analysis and greenhousemore » gas emission. Uncertainty and sensitivity analysis were also investigated in this study. Sensitivity analyses on required selling price (RSP) and greenhouse gas (GHG) emissions of CBTL fuels were conducted according to feedstock availability and price, biomass to coal mix ratio, conversion rate, internal rate of return (IRR), capital cost, operational and maintenance cost. The study of siting and capacity showed that feedstock mixed ratio limited the CBTL production. The price of coal had a more dominant effect on RSP than that of biomass. Different mix ratios in the feedstock and conversion rates led to RSP ranging from $104.3 - $157.9/bbl. LCA results indicated that GHG emissions ranged from 80.62 kg CO 2 eq to 101.46 kg CO2 eq/1,000 MJ of liquid fuel at various biomass to coal mix ratios and conversion rates if carbon capture and storage (CCS) was applied. Most of water and fossil energy were consumed in conversion process. Compared to petroleum-derived-liquid fuels, the reduction in GHG emissions could be between -2.7% and 16.2% with CBTL substitution. As for the technical study, three approaches of coal and biomass to liquids, direct, indirect and hybrid, were considered in the analysis. The process models including conceptual design, process modeling and process validation were developed and validated for different cases. Equipment design and capital costs were investigated on capital coast estimation and economical model validation. Material and energy balances and techno-economic analysis on base case were conducted for evaluation of projects. Also, sensitives studies of direct and indirect approaches were both used to evaluate the CBTL plant economic performance. In this study, techno-economic analysis were conducted in Aspen Process Economic Analyzer (APEA) environment for indirect, direct, and hybrid CBTL plants with CCS based on high fidelity process models developed in Aspen Plus and Excel. The process thermal efficiency ranges from 45% to 67%. The break-even oil price ranges from $86.1 to $100.6 per barrel for small scale (10000 bbl/day) CBTL plants and from $65.3 to $80.5 per barrel for large scale (50000 bbl/day) CBTL plants. Increasing biomass/coal ratio from 8/92 to 20/80 would increase the break-even oil price of indirect CBTL plant by $3/bbl and decrease the break-even oil price of direct CBTL plant by about $1/bbl. The order of carbon capture penalty is direct > indirect > hybrid. The order of capital investment is hybrid (with or without shale gas utilization) > direct (without shale gas utilization) > indirect > direct (with shale gas utilization). The order of thermal efficiency is direct > hybrid > indirect. The order of break-even oil price is hybrid (without shale gas utilization) > direct (without shale gas utilization) > hybrid (with shale gas utilization) > indirect > direct (with shale gas utilization).« less

Systematic review: cultural adaptation and feasibility of screening for autism in non-English speaking countries.

PubMed

Al Maskari, Turkiya S; Melville, Craig A; Willis, Diane S

2018-01-01

Screening children for autism has gained wider acceptance within clinical practice, and early intervention has improved outcomes. Increasingly, adapting an existing screening instrument is a common, fast method to create a usable screening tool, especially for countries with limited resources and/or expertise. However, concerns have been raised regarding adaptation adequacy and the feasibility of screening across cultural groups. This study systematically examined the levels of cultural adaptation and feasibility aspects considered when screening for autism in non-English speaking countries to build upon the sparse knowledge that exists on this topic in the literature. Nineteen studies, obtained from five electronic databases, were examined. PRISMA guidance was used for this review. The Ecological Validity Framework model, and Bowen Recommendations for Feasibility were adopted to extract relevant data, which was synthesised narratively. Cultural adaptation within the included studies mostly involved language translation with little information offered to enable conclusions on how the processes were guided and maintained. Few cultural adjustments involved modifying screening methods; clarifying difficult concepts and changing instrument content were employed to address the core values, competence, beliefs, and norms of the adapted culture. However, less attention was given to adapt the screening goals within the context of cultural values, and customs or to consider interactional match between the clients and assessors. The review also highlighted an acceptable level of practicality to screen for autism but did not encourage integrating autism screening within routine practice or beyond the study context for different cultures. Concurring with previous literature, we agree that knowledge on cultural adaptation for autism screening instruments is limited and not sufficiently documented to establish adaptation levels (process and/or contents), and prove adequacy. However, this review provides an infrastructure to improve future adaptation processes. Integrating autism screening as routine medical practice is not encouraged and warrants further feasibility studies to minimize wasted resources and improve screening effectiveness in various health care systems.

Remedial Action Assessment System: A computer-based methodology for conducting feasibility studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, M.K.; Buelt, J.L.; Stottlemyre, J.A.

1991-02-01

Because of the complexity and number of potential waste sites facing the US Department of Energy (DOE) for potential cleanup, DOE is supporting the development of a computer-based methodology to streamline the remedial investigation/feasibility study process. The Remedial Action Assessment System (RAAS), can be used for screening, linking, and evaluating established technology processes in support of conducting feasibility studies. It is also intended to do the same in support of corrective measures studies. The user interface employs menus, windows, help features, and graphical information while RAAS is in operation. Object-oriented programming is used to link unit processes into sets ofmore » compatible processes that form appropriate remedial alternatives. Once the remedial alternatives are formed, the RAAS methodology can evaluate them in terms of effectiveness, implementability, and cost. RAAS will access a user-selected risk assessment code to determine the reduction of risk after remedial action by each recommended alternative. The methodology will also help determine the implementability of the remedial alternatives at a site and access cost estimating tools to provide estimates of capital, operating, and maintenance costs. This paper presents the characteristics of two RAAS prototypes currently being developed. These include the RAAS Technology Information System, which accesses graphical, tabular and textual information about technologies, and the main RAAS methodology, which screens, links, and evaluates remedial technologies. 4 refs., 3 figs., 1 tab.« less

The use of feasibility studies for stepped-wedge cluster randomised trials: protocol for a review of impact and scope

PubMed Central

Kristunas, Caroline A; Hemming, Karla; Eborall, Helen C; Gray, Laura J

2017-01-01

Introduction The stepped-wedge cluster randomised trial (SW-CRT) is a complex design, for which many decisions about key design parameters must be made during the planning. These include the number of steps and the duration of time needed to embed the intervention. Feasibility studies are likely to be useful for informing these decisions and increasing the likelihood of the main trial's success. However, the number of feasibility studies being conducted for SW-CRTs is currently unknown. This review aims to establish the number of feasibility studies being conducted for SW-CRTs and determine which feasibility issues are commonly investigated. Methods and analysis Fully published feasibility studies for SW-CRTs will be identified, according to predefined inclusion criteria, from searches conducted in Ovid MEDLINE, Scopus, Embase and PsycINFO. To also identify and gain information on unpublished feasibility studies the following will be contacted: authors of published SW-CRTs (identified from the most recent systematic reviews); contacts for registered SW-CRTs (identified from clinical trials registries); lead statisticians of UK registered clinical trials units and researchers known to work in the area of SW-CRTs. Data extraction will be conducted independently by two reviewers. For the fully published feasibility studies, data will be extracted on the study characteristics, the rationale for the study, the process for determining progression to a main trial, how the study informed the main trial and whether the main trial went ahead. The researchers involved in the unpublished feasibility studies will be contacted to elicit the same information. A narrative synthesis will be conducted and provided alongside a descriptive analysis of the study characteristics. Ethics and dissemination This review does not require ethical approval, as no individual patient data will be used. The results of this review will be published in an open-access peer-reviewed journal. PMID:28765139

The use of feasibility studies for stepped-wedge cluster randomised trials: protocol for a review of impact and scope.

PubMed

Kristunas, Caroline A; Hemming, Karla; Eborall, Helen C; Gray, Laura J

2017-08-01

The stepped-wedge cluster randomised trial (SW-CRT) is a complex design, for which many decisions about key design parameters must be made during the planning. These include the number of steps and the duration of time needed to embed the intervention. Feasibility studies are likely to be useful for informing these decisions and increasing the likelihood of the main trial's success. However, the number of feasibility studies being conducted for SW-CRTs is currently unknown. This review aims to establish the number of feasibility studies being conducted for SW-CRTs and determine which feasibility issues are commonly investigated. Fully published feasibility studies for SW-CRTs will be identified, according to predefined inclusion criteria, from searches conducted in Ovid MEDLINE, Scopus, Embase and PsycINFO. To also identify and gain information on unpublished feasibility studies the following will be contacted: authors of published SW-CRTs (identified from the most recent systematic reviews); contacts for registered SW-CRTs (identified from clinical trials registries); lead statisticians of UK registered clinical trials units and researchers known to work in the area of SW-CRTs.Data extraction will be conducted independently by two reviewers. For the fully published feasibility studies, data will be extracted on the study characteristics, the rationale for the study, the process for determining progression to a main trial, how the study informed the main trial and whether the main trial went ahead. The researchers involved in the unpublished feasibility studies will be contacted to elicit the same information.A narrative synthesis will be conducted and provided alongside a descriptive analysis of the study characteristics. This review does not require ethical approval, as no individual patient data will be used. The results of this review will be published in an open-access peer-reviewed journal. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Fibre laser cutting of polycaprolactone sheet for stents manufacturing: A feasibility study

NASA Astrophysics Data System (ADS)

Guerra, Antonio J.; Farjas, Jordi; Ciurana, Joaquim

2017-10-01

The role of the stent is temporary and it is limited to the intervention and shortly thereafter. Bioresorbable polymer stents were introduced to overcome this problem, making the stent manufacturing process rather difficult considering the complexity of the material. The stent forecast sale makes constant technology development necessary on this field. The adaptation of the laser manufacturing industry to these new materials is costly, thus further studies employing different sorts of lasers are necessary. This paper aims to explore the feasibility of 1.08 μm wavelength fibre laser to cut polycaprolactone sheet, which is especially interesting for long-term implantable devices, such as stents. The laser cut samples were analysed by Differential Scanning Calorimetry (DSC), Tensile Stress Test, and Optical Microscopy in order to study the effects of the laser process over the workpiece. The parameters measured were: taper angle, dimensional precision, material structure changes and mechanical properties changes. Results showed a dimensional precision above 95.75% with a taper angle lower than 0.033°. The laser ablation process has exhibited a minor influence upon material properties. Results exhibit the feasibility of fibre laser to cut polycaprolactone, making the fibre laser an alternative to manufacture stents.

Feasibility of utilizing bioindicators for testing microbial inactivation in sweetpotato purees processed with a continuous-flow microwave system.

PubMed

Brinley, T A; Dock, C N; Truong, V-D; Coronel, P; Kumar, P; Simunovic, J; Sandeep, K P; Cartwright, G D; Swartzel, K R; Jaykus, L-A

2007-06-01

Continuous-flow microwave heating has potential in aseptic processing of various food products, including purees from sweetpotatoes and other vegetables. Establishing the feasibility of a new processing technology for achieving commercial sterility requires evaluating microbial inactivation. This study aimed to assess the feasibility of using commercially available plastic pouches of bioindicators containing spores of Geobacillius stearothermophilus ATCC 7953 and Bacillus subtilis ATCC 35021 for evaluating the degree of microbial inactivation achieved in vegetable purees processed in a continuous-flow microwave heating unit. Sweetpotato puree seeded with the bioindicators was subjected to 3 levels of processing based on the fastest particles: undertarget process (F(0) approximately 0.65), target process (F(0) approximately 2.8), and overtarget process (F(0) approximately 10.10). After initial experiments, we found it was necessary to engineer a setup with 2 removable tubes connected to the continuous-flow microwave system to facilitate the injection of indicators into the unit without interrupting the puree flow. Using this approach, 60% of the indicators injected into the system could be recovered postprocess. Spore survival after processing, as evaluated by use of growth indicator dyes and standard plating methods, verified inactivation of the spores in sweetpotato puree. The log reduction results for B. subtilis were equivalent to the predesigned degrees of sterilization (F(0)). This study presents the first report suggesting that bioindicators such as the flexible, food-grade plastic pouches can be used for microbial validation of commercial sterilization in aseptic processing of foods using a continuous-flow microwave system.

Advanced Low Temperature Geothermal Power Cycles (The ENTIV Organic Project) Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mugerwa, Michael

2015-11-18

Feasibility study of advanced low temperature thermal power cycles for the Entiv Organic Project. Study evaluates amonia-water mixed working fluid energy conversion processes developed and licensed under Kalex in comparison with Kalina cycles. Both cycles are developed using low temperature thermal resource from the Lower Klamath Lake Geothermal Area. An economic feasibility evaluation was conducted for a pilot plant which was deemed unfeasible by the Project Sponsor (Entiv).

Low-cost Solar Array Project. Feasibility of the Silane Process for Producing Semiconductor-grade Silicon

NASA Technical Reports Server (NTRS)

1979-01-01

The feasibility of Union Carbide's silane process for commercial application was established. An integrated process design for an experimental process system development unit and a commercial facility were developed. The corresponding commercial plant economic performance was then estimated.

Feasibility and Efficacy of Nurse-Driven Acute Stroke Care.

PubMed

Mainali, Shraddha; Stutzman, Sonja; Sengupta, Samarpita; Dirickson, Amanda; Riise, Laura; Jones, Donald; Yang, Julian; Olson, DaiWai M

2017-05-01

Acute stroke care requires rapid assessment and intervention. Replacing traditional sequential algorithms in stroke care with parallel processing using telestroke consultation could be useful in the management of acute stroke patients. The purpose of this study was to assess the feasibility of a nurse-driven acute stroke protocol using a parallel processing model. This is a prospective, nonrandomized, feasibility study of a quality improvement initiative. Stroke team members had a 1-month training phase, and then the protocol was implemented for 6 months and data were collected on a "run-sheet." The primary outcome of this study was to determine if a nurse-driven acute stroke protocol is feasible and assists in decreasing door to needle (intravenous tissue plasminogen activator [IV-tPA]) times. Of the 153 stroke patients seen during the protocol implementation phase, 57 were designated as "level 1" (symptom onset <4.5 hours) strokes requiring acute stroke management. Among these strokes, 78% were nurse-driven, and 75% of the telestroke encounters were also nurse-driven. The average door to computerized tomography time was significantly reduced in nurse-driven codes (38.9 minutes versus 24.4 minutes; P < .04). The use of a nurse-driven protocol is feasible and effective. When used in conjunction with a telestroke specialist, it may be of value in improving patient outcomes by decreasing the time for door to decision for IV-tPA. Copyright © 2017 National Stroke Association. Published by Elsevier Inc. All rights reserved.

Reporting of feasibility factors in publications on integrated treatment programs for women with substance abuse issues and their children: a systematic review and analysis.

PubMed

Henderson, Joanna; Milligan, Karen; Niccols, Alison; Thabane, Lehana; Sword, Wendy; Smith, Ainsley; Rosenkranz, Susan

2012-12-07

Implementation of evidence-based practices in real-world settings is a complex process impacted by many factors, including intervention, dissemination, service provider, and organizational characteristics. Efforts to improve knowledge translation have resulted in greater attention to these factors. Researcher attention to the applicability of findings to applied settings also has increased. Much less attention, however, has been paid to intervention feasibility, an issue important to applied settings. In a systematic review of 121 documents regarding integrated treatment programs for women with substance abuse issues and their children, we examined the presence of feasibility-related information. Specifically, we analysed study descriptions for information regarding feasibility factors in six domains (intervention, practitioner, client, service delivery, organizational, and service system). On average, fewer than half of the 25 feasibility details assessed were included in the documents. Most documents included some information describing the participating clients, the services offered as part of the intervention, the location of services, and the expected length of stay or number of sessions. Only approximately half of the documents included specific information about the treatment model. Few documents indicated whether the intervention was manualized or whether the intervention was preceded by a standardized screening or assessment process. Very few provided information about the core intervention features versus the features open to local adaptation, or the staff experience or training required to deliver the intervention. As has been found in reviews of intervention studies in other fields, our findings revealed that most documents provide some client and intervention information, but few documents provided sufficient information to fully evaluate feasibility. We consider possible explanations for the paucity of feasibility information and provide suggestions for better reporting to promote diffusion of evidence-based practices.

Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 1A: Summary

NASA Technical Reports Server (NTRS)

Miller, R. E., Jr.; Redhed, D. D.; Kawaguchi, A. S.; Hansen, S. D.; Southall, J. W.

1973-01-01

IPAD was defined as a total system oriented to the product design process. This total system was designed to recognize the product design process, individuals and their design process tasks, and the computer-based IPAD System to aid product design. Principal elements of the IPAD System include the host computer and its interactive system software, new executive and data management software, and an open-ended IPAD library of technical programs to match the intended product design process. The basic goal of the IPAD total system is to increase the productivity of the product design organization. Increases in individual productivity were feasible through automation and computer support of routine information handling. Such proven automation can directly decrease cost and flowtime in the product design process.

Feasibility of a community intervention for the prevention of suicide and alcohol abuse with Yup'ik Alaska Native youth: the Elluam Tungiinun and Yupiucimta Asvairtuumallerkaa studies.

PubMed

Mohatt, Gerald V; Fok, Carlotta Ching Ting; Henry, David; Allen, James

2014-09-01

The Elluam Tungiinun and Yupiucimta Asvairtuumallerkaa studies evaluated the feasibility of a community intervention to prevent suicide and alcohol abuse among rural Yup'ik Alaska Native youth in two remote communities. The intervention originated in an Indigenous model of protection, and its development used a community based participatory research process. Feasibility assessment aimed to assess the extent to which (1) the intervention could be implemented in rural Alaska Native communities, and (2) the intervention was capable of producing measurable effects. Scales maximally sensitive to change were derived from earlier measurement work, and the study contrasted implementation process and outcomes across the two communities. In one community, medium dose response effects (d = .30-.50), with dose defined as number of intervention activities attended, were observed in the growth of intermediate protective factors and ultimate variables. In the other community, medium dose effects were observed for one intermediate protective factor variable, and small dose effects were observed in ultimate variables. Differences across communities in resources supporting intervention explain these contrasting outcomes. Results suggest implementation in these rural Alaska settings is feasible when sufficient resources are available to sustain high levels of local commitment. In such cases, measureable effects are sufficient to warrant a prevention trial.

A Process Evaluation of Project Developmental Continuity: Final Report of the PDC Feasibility Study, 1974-1977.

ERIC Educational Resources Information Center

Love, John M.; And Others

This is the final report of the 3-year feasibility phase of a projected 7-year longitudinal evaluation of Project Developmental Continuity (PDC), a Head Start demonstration program aimed at providing educational and developmental continuity between children's Head Start and primary school experiences. Chapter I gives an overview of the PDC program…

Feasibility of a Computerized Method to Measure Quality of "Everyday" Life in Children with Neuromuscular Disorders

ERIC Educational Resources Information Center

Bray, Paula; Bundy, Anita C.; Ryan, Monique M.; North, Kathryn N.

2010-01-01

Measurement of quality of life is becoming increasingly important in health care. Self-reported quality of life is the preferred method of gathering this information, but children are often excluded from this process, their input being replaced by parent-proxy report. This feasibility study tested assessment of "daily" quality-of-life by a…

Baseline studies on the feasibility of detecting a coal/shale interface with a self-powered sensitized pick

NASA Technical Reports Server (NTRS)

Anderson, G. R., II

1981-01-01

The feasibility of utilizing a sensitized pick to discriminate between cutting coal and roof material during the longwall mining process was investigated. A conventional longwall mining pick was instrumented and cutting force magnitudes were determined for a variety of materials, including Illinois #6 coal, shale type materials, and synthetic coal/shale materials.

Development and initial evaluation of an instrument to assess physiotherapists' clinical reasoning focused on clients' behavior change.

PubMed

Elvén, Maria; Hochwälder, Jacek; Dean, Elizabeth; Söderlund, Anne

2018-05-01

A systematically developed and evaluated instrument is needed to support investigations of physiotherapists' clinical reasoning integrated with the process of clients' behavior change. This study's aim was to develop an instrument to assess physiotherapy students' and physiotherapists' clinical reasoning focused on clients' activity-related behavior and behavior change, and initiate its evaluation, including feasibility and content validity. The study was conducted in three phases: 1) determination of instrument structure and item generation, based on a model, guidelines for assessing clinical reasoning, and existing measures; 2) cognitive interviews with five physiotherapy students to evaluate item understanding and feasibility; and 3) a Delphi process with 18 experts to evaluate content relevance. Phase 1 resulted in an instrument with four domains: Physiotherapist; Input from client; Functional behavioral analysis; and Strategies for behavior change. The instrument consists of case scenarios followed by items in which key features are identified, prioritized, or interpreted. Phase 2 resulted in revisions of problems and approval of feasibility. Phase 3 demonstrated high level of consensus regarding the instrument's content relevance. This feasible and content-validated instrument shows potential for use in investigations of physiotherapy students' and physiotherapists' clinical reasoning, however continued development and testing are needed.

Oxygen production processes on the Moon: An overview

NASA Technical Reports Server (NTRS)

Taylor, Lawrence A.; Carrier, W. David, III

1991-01-01

The production of oxygen on the Moon utilizing indigenous material is paramount to a successful lunar colonization. Several processes were put forth to accomplish this. The lunar liquid oxygen (LLOX) generation schemes which have received the most study to date are those involving: (1) the reduction of ilmenite (FeTiO3) by H2, C, CO, CH4, CO-Cl2 plasma; (2) magma electrolysis, both unadulterated and fluoride-fluxed, and (3) several others, including carbo-chlorination, HF acid leaching, fluorine extraction, magma oxidation, and vapor pyrolysis. The H2 reduction of ilmenite and magma electrolysis processes have received the most study to date. At this stage of development, they both appear feasible schemes with various pros and cons. However, all processes should be addressed at least at the onset of the considerations. It is ultimatley the energy requirements of the entire process, including the acquisition of feedstock, which will determine the mode of oxygen productions. There is an obvious need for considerably more experimentation and study. Some of these requisite studies are in progress, and several of the most studied and feasible processes for winning oxygen from lunar materials are reviewed.

Study on Energy Productivity Ratio (EPR) at palm kernel oil processing factory: case study on PT-X at Sumatera Utara Plantation

NASA Astrophysics Data System (ADS)

Haryanto, B.; Bukit, R. Br; Situmeang, E. M.; Christina, E. P.; Pandiangan, F.

2018-02-01

The purpose of this study was to determine the performance, productivity and feasibility of the operation of palm kernel processing plant based on Energy Productivity Ratio (EPR). EPR is expressed as the ratio of output to input energy and by-product. Palm Kernel plan is process in palm kernel to become palm kernel oil. The procedure started from collecting data needed as energy input such as: palm kernel prices, energy demand and depreciation of the factory. The energy output and its by-product comprise the whole production price such as: palm kernel oil price and the remaining products such as shells and pulp price. Calculation the equality of energy of palm kernel oil is to analyze the value of Energy Productivity Ratio (EPR) bases on processing capacity per year. The investigation has been done in Kernel Oil Processing Plant PT-X at Sumatera Utara plantation. The value of EPR was 1.54 (EPR > 1), which indicated that the processing of palm kernel into palm kernel oil is feasible to be operated based on the energy productivity.

Gasoline from coal in the state of Illinois: feasibility study. Volume I. Design. [KBW gasification process, ICI low-pressure methanol process and Mobil M-gasoline process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-01-01

Volume 1 describes the proposed plant: KBW gasification process, ICI low-pressure methanol process and Mobil M-gasoline process, and also with ancillary processes, such as oxygen plant, shift process, RECTISOL purification process, sulfur recovery equipment and pollution control equipment. Numerous engineering diagrams are included. (LTN)

Monitoring temperatures in coal conversion and combustion processes via ultrasound

NASA Astrophysics Data System (ADS)

Gopalsami, N.; Raptis, A. C.; Mulcahey, T. P.

1980-02-01

The state of the art of instrumentation for monitoring temperatures in coal conversion and combustion systems is examined. The instrumentation types studied include thermocouples, radiation pyrometers, and acoustical thermometers. The capabilities and limitations of each type are reviewed. A feasibility study of the ultrasonic thermometry is described. A mathematical model of a pulse-echo ultrasonic temperature measurement system is developed using linear system theory. The mathematical model lends itself to the adaptation of generalized correlation techniques for the estimation of propagation delays. Computer simulations are made to test the efficacy of the signal processing techniques for noise-free as well as noisy signals. Based on the theoretical study, acoustic techniques to measure temperature in reactors and combustors are feasible.

Recoding Numerics to Geometrics for Complex Discrimination Tasks; A Feasibility Study of Coding Strategy.

ERIC Educational Resources Information Center

Simpkins, John D.

Processing complex multivariate information effectively when relational properties of information sub-groups are ambiguous is difficult for man and man-machine systems. However, the information processing task is made easier through code study, cybernetic planning, and accurate display mechanisms. An exploratory laboratory study designed for the…

41 CFR 105-50.202-5 - Data processing services.

Code of Federal Regulations, 2010 CFR

2010-07-01

... § 105-50.202-5 Data processing services. GSA will develop ADP logistical feasibility studies, software... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Data processing services... Regulations System (Continued) GENERAL SERVICES ADMINISTRATION 50-PROVISION OF SPECIAL OR TECHNICAL SERVICES...

Video-game based exercises for older people with chronic low back pain: a protocol for a feasibility randomised controlled trial (the GAMEBACK trial).

PubMed

Zadro, Joshua Robert; Shirley, Debra; Simic, Milena; Mousavi, Seyed Javad; Ceprnja, Dragana; Maka, Katherine; Ferreira, Paulo

2017-06-01

To investigate the feasibility of implementing a video-game exercise programme for older people with chronic low back pain (LBP). Single-centred single-blinded randomised controlled trial (RCT). Physiotherapy outpatient department in a public hospital in Western Sydney, Australia. We will recruit 60 participants over 55 years old with chronic LBP from the waiting list. Participants will be randomised to receive video-game exercise (n=30) or to remain on the waiting list (n=30) for 8 weeks, with follow up at 3 and 6 months. Participants engaging in video-game exercises will be unsupervised and will complete video-game exercise for 60minutes, 3 times per week. Participants allocated to remain on the waiting list will be encouraged to maintain their usual levels of physical activity. The primary outcomes for this feasibility study will be study processes (recruitment and response rates, adherence to and experience with the intervention, and incidence of adverse events) relevant to the future design of a large RCT. Estimates of treatment efficacy (point estimates and 95% confidence intervals) on pain self-efficacy, care seeking, physical activity, fear of movement/re-injury, pain, physical function, disability, falls-efficacy, strength, and walking speed, will be our secondary outcome measures. Recruitment for this trial began in November 2015. This study describes the rationale and processes of a feasibility study investigating a video-game exercise programme for older people with chronic LBP. Results from the feasibility study will inform on the design and sample required for a large multicentre RCT. Australian New Zealand Clinical Trials Registry: ACTRN12615000703505. Copyright © 2016 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

Improving Patient Safety in Public Hospitals: Developing Standard Measures to Track Medical Errors and Process Breakdowns.

PubMed

Ackerman, Sara L; Gourley, Gato; Le, Gem; Williams, Pamela; Yazdany, Jinoos; Sarkar, Urmimala

2018-03-14

The aim of the study was to develop standards for tracking patient safety gaps in ambulatory care in safety net health systems. Leaders from five California safety net health systems were invited to participate in a modified Delphi process sponsored by the Safety Promotion Action Research and Knowledge Network (SPARKNet) and the California Safety Net Institute in 2016. During each of the three Delphi rounds, the feasibility and validity of 13 proposed patient safety measures were discussed and prioritized. Surveys and transcripts from the meetings were analyzed to understand the decision-making process. The Delphi process included eight panelists. Consensus was reached to adopt 9 of 13 proposed measures. All 9 measures were unanimously considered valid, but concern was expressed about the feasibility of implementing several of the measures. Although safety net health systems face high barriers to standardized measurement, our study demonstrates that consensus can be reached on acceptable and feasible methods for tracking patient safety gaps in safety net health systems. If accompanied by the active participation key stakeholder groups, including patients, clinicians, staff, data system professionals, and health system leaders, the consensus measures reported here represent one step toward improving ambulatory patient safety in safety net health systems.

Feasibility Study for a Plasma Dynamo Facility to Investigate Fundamental Processes in Plasma Astrophysics. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Forest, Cary B.

The scientific equipment purchased on this grant was used on the Plasma Dynamo Prototype Experiment as part of Professor Forest's feasibility study for determining if it would be worthwhile to propose building a larger plasma physics experiment to investigate various fundamental processes in plasma astrophysics. The initial research on the Plasma Dynamo Prototype Experiment was successful so Professor Forest and Professor Ellen Zweibel at UW-Madison submitted an NSF Major Research Instrumentation proposal titled "ARRA MRI: Development of a Plasma Dynamo Facility for Experimental Investigations of Fundamental Processes in Plasma Astrophysics." They received funding for this project and the Plasma Dynamomore » Facility also known as the "Madison Plasma Dynamo Experiment" was constructed. This experiment achieved its first plasma in the fall of 2012 and U.S. Dept. of Energy Grant No. DE-SC0008709 "Experimental Studies of Plasma Dynamos," now supports the research.« less

STATISTICAL DATA ON CHEMICAL COMPOUNDS.

DTIC Science & Technology

DATA STORAGE SYSTEMS, FEASIBILITY STUDIES, COMPUTERS, STATISTICAL DATA , DOCUMENTS, ARMY...CHEMICAL COMPOUNDS, INFORMATION RETRIEVAL), (*INFORMATION RETRIEVAL, CHEMICAL COMPOUNDS), MOLECULAR STRUCTURE, BIBLIOGRAPHIES, DATA PROCESSING

Preparing tomorrow's health sciences librarians: feasibility and marketing studies.

PubMed Central

Moran, B B; Jenkins, C G; Friedman, C P; Lipscomb, C E; Gollop, C J; Moore, M E; Morrison, M L; Tibbo, H R; Wildemuth, B M

1996-01-01

The University of North Carolina at Chapel Hill is devising and evaluating five curricular models designed to improve education for health sciences librarianship. These models fit into a continual learning process from the initial professional preparation to lifelong learning opportunities. Three of them enhance existing degree and certificate programs in the School of Information and Library Science (SILS) with a health sciences specialization, and two are new programs for working information professionals. The approaches involve partnerships among SILS, the Health Sciences Library, and the program in Medical Informatics. The planning process will study the feasibility of the proposed programs, test the marketability of the models to potential students and employers, and make recommendations about implementation. PMID:8913557

Feasibility study of RFID technology for construction load tracking.

DOT National Transportation Integrated Search

2010-12-01

ADOT&PF is seeking more efficient business practices and processes to increase its speed in delivering supplies to work sites, optimize the workforce, and minimize : costs. The current tracking process uses a computer-generated ticket carried by the ...

Peer-led, school-based nutrition education for young adolescents: feasibility and process evaluation of the TEENS study.

PubMed

Story, Mary; Lytle, Leslie A; Birnbaum, Amanda S; Perry, Cheryl L

2002-03-01

Peer education has become a popular strategy for health promotion interventions with adolescents, but it has not been used widely in school-based nutrition education. This paper describes and reports on the feasibility of the peer leader component of a school-based nutrition intervention for young adolescents designed to increase fruit and vegetable intakes and lower fat foods. About 1,000 seventh-grade students in eight schools received the nutrition intervention. Of these, 272 were trained as peer leaders to assist the teacher in implementing the activities. Results from a multicomponent process evaluation based on peer leader and classroom student feedback, direct classroom observation, and teacher ratings and interviews are presented. Results show that peer-led nutrition education approaches in schools are feasible and have high acceptability among peer leaders, classroom students, and teachers.

The Feasibility of Embedding Data Collection into the Routine Service Delivery of a Multi-Component Program for High-Risk Young People.

PubMed

Knight, Alice; Havard, Alys; Shakeshaft, Anthony; Maple, Myfanwy; Snijder, Mieke; Shakeshaft, Bernie

2017-02-20

There is little evidence about how to improve outcomes for high-risk young people, of whom Indigenous young people are disproportionately represented, due to few evaluation studies of interventions. One way to increase the evidence is to have researchers and service providers collaborate to embed evaluation into the routine delivery of services, so program delivery and evaluation occur simultaneously. This study aims to demonstrate the feasibility of integrating best-evidence measures into the routine data collection processes of a service for high-risk young people, and identify the number and nature of risk factors experienced by participants. The youth service is a rural based NGO comprised of multiple program components: (i) engagement activities; (ii) case management; (iii) diversionary activities; (iv) personal development; and (v) learning and skills. A best-evidence assessment tool was developed by staff and researchers and embedded into the service's existing intake procedure. Assessment items were organised into demographic characteristics and four domains of risk: education and employment; health and wellbeing; substance use; and crime. Descriptive data are presented and summary risk variables were created for each domain of risk. A count of these summary variables represented the number of co-occurring risks experienced by each participant. The feasibility of this process was determined by the proportion of participants who completed the intake assessment and provided research consent. This study shows 85% of participants completed the assessment tool demonstrating that data on participant risk factors can feasibly be collected by embedding a best-evidence assessment tool into the routine data collection processes of a service. The most prevalent risk factors were school absence, unemployment, suicide ideation, mental distress, substance use, low levels of physical activity, low health service utilisation, and involvement in crime or with the juvenile justice system. All but one participant experienced at least two co-occurring domains of risk, and the majority of participants (58%) experienced co-occurring risk across four domains. This is the first study to demonstrate that best-evidence measures can feasibly be embedded into the routine data collection processes of a service for high-risk young people. This process allows services to tailor their activities to the most prevalent risks experienced by participants, and monitor these risks over time. Replication of this process in other services would improve the quality of services, facilitate more high quality evaluations of services, and contribute evidence on how to improve outcomes for high-risk young people.

A FEASIBILITY STUDY FOR THE COPROCESSING OF FOSSIL FUELS WITH BIOMASS BY THE HYDROCARB PROCESS

EPA Science Inventory

The report describes and gives results of an assessment of a new process concept for the production of carbon and methanol from fossil fuels. The Hydrocarb Process consists of the hydrogasification of carbonaceous material to produce methane, which is subsequently thermally decom...

Can the impact of public involvement on research be evaluated? A mixed methods study.

PubMed

Barber, Rosemary; Boote, Jonathan D; Parry, Glenys D; Cooper, Cindy L; Yeeles, Philippa; Cook, Sarah

2012-09-01

  Public involvement is central to health and social research policies, yet few systematic evaluations of its impact have been carried out, raising questions about the feasibility of evaluating the impact of public involvement.   To investigate whether it is feasible to evaluate the impact of public involvement on health and social research.   Mixed methods including a two-round Delphi study with pre-specified 80% consensus criterion, with follow-up interviews. UK and international panellists came from different settings, including universities, health and social care institutions and charitable organizations. They comprised researchers, members of the public, research managers, commissioners and policy makers, self-selected as having knowledge and/or experience of public involvement in health and/or social research; 124 completed both rounds of the Delphi process. A purposive sample of 14 panellists was interviewed.   Consensus was reached that it is feasible to evaluate the impact of public involvement on 5 of 16 impact issues: identifying and prioritizing research topics, disseminating research findings and on key stakeholders. Qualitative analysis revealed the complexities of evaluating a process that is subjective and socially constructed. While many panellists believed that it is morally right to involve the public in research, they also considered that it is appropriate to evaluate the impact of public involvement.   This study found consensus among panellists that it is feasible to evaluate the impact of public involvement on some research processes, outcomes and on key stakeholders. The value of public involvement and the importance of evaluating its impact were endorsed. © 2011 Blackwell Publishing Ltd.

Can the impact of public involvement on research be evaluated? A mixed methods study

PubMed Central

Barber, Rosemary; Boote, Jonathan D; Parry, Glenys D; Cooper, Cindy L; Yeeles, Philippa; Cook, Sarah

2011-01-01

Abstract Background  Public involvement is central to health and social research policies, yet few systematic evaluations of its impact have been carried out, raising questions about the feasibility of evaluating the impact of public involvement. Objective  To investigate whether it is feasible to evaluate the impact of public involvement on health and social research. Methods  Mixed methods including a two‐round Delphi study with pre‐specified 80% consensus criterion, with follow‐up interviews. UK and international panellists came from different settings, including universities, health and social care institutions and charitable organizations. They comprised researchers, members of the public, research managers, commissioners and policy makers, self‐selected as having knowledge and/or experience of public involvement in health and/or social research; 124 completed both rounds of the Delphi process. A purposive sample of 14 panellists was interviewed. Results  Consensus was reached that it is feasible to evaluate the impact of public involvement on 5 of 16 impact issues: identifying and prioritizing research topics, disseminating research findings and on key stakeholders. Qualitative analysis revealed the complexities of evaluating a process that is subjective and socially constructed. While many panellists believed that it is morally right to involve the public in research, they also considered that it is appropriate to evaluate the impact of public involvement. Conclusions  This study found consensus among panellists that it is feasible to evaluate the impact of public involvement on some research processes, outcomes and on key stakeholders. The value of public involvement and the importance of evaluating its impact were endorsed. PMID:21324054

Feasibility of Computer Processing of Technical Information on the Design of Instructional Systems. Final Report for the Period 1 July 1972 through 31 March 1973.

ERIC Educational Resources Information Center

Scheffler, F. L.; And Others

A feasibility study examined the capability of a computer-based system's handling of technical information pertinent to the design of instructional systems. Structured interviews were held to assess the information needs of both researchers and practitioners and an investigation was conducted of 10 computer-based information storage and retrieval…

Long-range eye tracking: A feasibility study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jayaweera, S.K.; Lu, Shin-yee

1994-08-24

The design considerations for a long-range Purkinje effects based video tracking system using current technology is presented. Past work, current experiments, and future directions are thoroughly discussed, with an emphasis on digital signal processing techniques and obstacles. It has been determined that while a robust, efficient, long-range, and non-invasive eye tracking system will be difficult to develop, such as a project is indeed feasible.

Feasibility of a Manualized Occupation-Based Diabetes Management Intervention.

PubMed

Carandang, Kristine M; Pyatak, Elizabeth A

We investigated the feasibility and acceptability of an occupational therapy intervention targeting diabetes management for underserved young adults. Eight participants completed the intervention and a battery of assessments at baseline and after the intervention. At completion, the participants and occupational therapist were interviewed about their experiences with the study. Four categories of assessment questions were used to guide the study: process, resource, management, and scientific. Successes included recruitment; fulfillment of tasks by staff and partnering clinics; adequate space, financial support, and equipment; and meaningfulness of the intervention for participants. Challenges included scheduling participants for the intervention and follow-up focus groups and providing client centeredness and flexibility while reducing burden on the intervener. This feasibility study allowed us to make necessary revisions to our study protocol before implementing a larger pilot study. Copyright © 2018 by the American Occupational Therapy Association, Inc.

Economic Viability of Brewery Spent Grain as a Biofuel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Morrow, Charles

This report summarizes an investigation into the technical feasibility and economic viability of use grain wastes from the beer brewing process as fuel to generate the heat needed in subsequent brewing process. The study finds that while use of spent grain as a biofuel is technically feasible, the economics are not attractive. Economic viability is limited by the underuse of capital equipment. The investment in heating equipment requires a higher utilization that the client brewer currently anticipates. It may be possible in the future that changing factors may swing the decision to a more positive one.

Feasibility study of a gamma camera for monitoring nuclear materials in the PRIDE facility

NASA Astrophysics Data System (ADS)

Jo, Woo Jin; Kim, Hyun-Il; An, Su Jung; Lee, Chae Young; Song, Han-Kyeol; Chung, Yong Hyun; Shin, Hee-Sung; Ahn, Seong-Kyu; Park, Se-Hwan

2014-05-01

The Korea Atomic Energy Research Institute (KAERI) has been developing pyroprocessing technology, in which actinides are recovered together with plutonium. There is no pure plutonium stream in the process, so it has an advantage of proliferation resistance. Tracking and monitoring of nuclear materials through the pyroprocess can significantly improve the transparency of the operation and safeguards. An inactive engineering-scale integrated pyroprocess facility, which is the PyRoprocess Integrated inactive DEmonstration (PRIDE) facility, was constructed to demonstrate engineering-scale processes and the integration of each unit process. the PRIDE facility may be a good test bed to investigate the feasibility of a nuclear material monitoring system. In this study, we designed a gamma camera system for nuclear material monitoring in the PRIDE facility by using a Monte Carlo simulation, and we validated the feasibility of this system. Two scenarios, according to locations of the gamma camera, were simulated using GATE (GEANT4 Application for Tomographic Emission) version 6. A prototype gamma camera with a diverging-slat collimator was developed, and the simulated and experimented results agreed well with each other. These results indicate that a gamma camera to monitor the nuclear material in the PRIDE facility can be developed.

Application priority of GSHP systems in the climate conditions of the United States

DOE PAGES

Cho, Soolyeon; Ray, Saurabh; Im, Piljae; ...

2017-05-15

Building energy-performance simulation programs are powerful tools for many aspects of feasibility studies regarding ground source heat pump (GSHP). However, the understanding of the limitations of the energy modelling programs, their capability of predicting energy performance early in the design process, and the complicated functionality of these programs makes the software programs harder to use and less practical. The interactive tool developed in this study seeks to provide analysis information in a straightforward manner that is inexpensive, convenient, and sophisticated. This tool uses an inclusive approach to assess the feasibility of GSHPs by prescreening critical factors such as climate conditions,more » ground temperatures, energy use, and cost savings. It is interactive and enables the user to do a feasibility analysis with a weighting factor for each feasibility criterion based on the user’s preference and interests. The application of the tool explains feasibility scores of 15 representative cities in various climatic conditions across the US. Results for commercial buildings show that the GSHP systems are more feasible in cold and dry, cool and humid, and very cold areas than warm and dry, very hot and humid, and mixed marine areas, and that most feasibility levels are located on good and moderate.« less

A feasibility study for conducting unattended night-time operations at WMKO

NASA Astrophysics Data System (ADS)

Stomski, Paul J.; Gajadhar, Sarah; Dahm, Scott; Jordan, Carolyn; Nordin, Tom

2016-08-01

In 2015, W. M. Keck Observatory conducted a study of the feasibility of conducting nighttime operations on Maunakea without any staff on the mountain. The study was motivated by the possibility of long term operational costs savings as well as other expected benefits. The goals of the study were to understand the technical feasibility and risk as well as to provide labor and cost estimates for implementation. The results of the study would be used to inform a decision about whether or not to fund and initiate a formal project aimed at the development of this new unattended nighttime operating capability. In this paper we will describe the study process as well as a brief summary of the results including the identified viable design alternative, the risk analysis, and the scope of work. We will also share the decisions made as a result of the study and current status of related follow-on activity.

Feasibility of commercial space manufacturing, production of pharmaceuticals. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1978-01-01

The feasibility of the commercial manufacturing of pharmaceuticals in space is examined. The method of obtaining pharmaceutical company involvement, laboratory results of the separation of serum proteins by the continuous flow electrophoresis process, the selection and study of candidate products, and their production requirements is presented. Antihemophilic factor, beta cells, erythropoietin, epidermal growth factor, alpha-1-antitrypsin and interferon were studied. Production mass balances for antihemophilic factor, beta cells, and erythropoietin were compared for space verus ground operation.

A Feasibility Study to Evaluate Wind Energy Potential on the Navajo Nation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Terry Battiest

2012-11-30

The project, A Feasibility Study to Evaluate Wind Energy Potential on the Navajo Nation, is funded under a solicitation issued by the U.S. Department of Energy Tribal Energy Program. Funding provided by the grant allowed the Navajo Nation to measure wind potential at two sites, one located within the boundaries of the Navajo Nation and the other off-reservation during the project period (September 5, 2005 - September 30, 2009). The recipient for the grant award is the Navajo Tribal Utility Authority (NTUA). The grant allowed the Navajo Nation and NTUA manage the wind feasibility from initial site selection through themore » decision-making process to commit to a site for wind generation development. The grant activities help to develop human capacity at NTUA and help NTUA to engage in renewable energy generation activities, including not only wind but also solar and biomass. The final report also includes information about development activities regarding the sited included in the grant-funded feasibility study.« less

Restoring effective sleep tranquility (REST): A feasibility and pilot study.

PubMed

Eakman, Aaron M; Schmid, Arlene A; Henry, Kimberly L; Rolle, Natalie R; Schelly, Catherine; Pott, Christine E; Burns, Joshua E

2017-06-01

The purpose of this pilot study was to establish the feasibility of completing a future controlled trial of a multi-component cognitive behavioral therapy for insomnia program for military veterans with sleep disturbance. This was a single-arm feasibility and pilot study. Participants were United States post-9/11 veterans with service-connected injuries, university students, and had self-reported sleep disturbances. Restoring Effective Sleep Tranquility was a multi-component cognitive behavioral therapy for insomnia intervention consisting of seven sessions of group therapy and eight 1:1 sessions delivered by occupational therapists. Feasibility and pilot indicators were process, resources, management, and scientific, including pre-post-assessments of sleep difficulties, dysfunctional sleep beliefs, participation, and pain interference. Indicators were supportive of feasibility, including reduced sleep difficulties (for example Medical Outcomes Study Sleep Measure [ t  = 3.29, p  = .02]), reduced nightmares: t  = 2.79, p  = .03; fewer dysfunctional sleep beliefs: t  = 3.63, p  = .01, and greater ability to participate in social roles: t  = -2.86, p  = .03, along with trends towards improved satisfaction with participation and reduced pain interference. The Restoring Effective Sleep Tranquility program may reduce sleep difficulties and improve participation in US veterans with service-connected injuries, and evidence indicates a controlled trial would be feasible to deliver.

Restoring effective sleep tranquility (REST): A feasibility and pilot study

PubMed Central

Schmid, Arlene A; Henry, Kimberly L; Rolle, Natalie R; Schelly, Catherine; Pott, Christine E; Burns, Joshua E

2017-01-01

Introduction The purpose of this pilot study was to establish the feasibility of completing a future controlled trial of a multi-component cognitive behavioral therapy for insomnia program for military veterans with sleep disturbance. Method This was a single-arm feasibility and pilot study. Participants were United States post-9/11 veterans with service-connected injuries, university students, and had self-reported sleep disturbances. Restoring Effective Sleep Tranquility was a multi-component cognitive behavioral therapy for insomnia intervention consisting of seven sessions of group therapy and eight 1:1 sessions delivered by occupational therapists. Feasibility and pilot indicators were process, resources, management, and scientific, including pre–post-assessments of sleep difficulties, dysfunctional sleep beliefs, participation, and pain interference. Findings Indicators were supportive of feasibility, including reduced sleep difficulties (for example Medical Outcomes Study Sleep Measure [t = 3.29, p = .02]), reduced nightmares: t = 2.79, p = .03; fewer dysfunctional sleep beliefs: t = 3.63, p = .01, and greater ability to participate in social roles: t = –2.86, p = .03, along with trends towards improved satisfaction with participation and reduced pain interference. Conclusion The Restoring Effective Sleep Tranquility program may reduce sleep difficulties and improve participation in US veterans with service-connected injuries, and evidence indicates a controlled trial would be feasible to deliver. PMID:28626295

Feasibility study on the modernization and expansion of the Tema Oil Refinery. Executive Summary. Export trade information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-04-01

The Tema Oil Refinery (TOR), which was commissioned in 1963, is a simple hydro-skimming plant which processes crude oil into LPG, gasoline, kerosene, gasoil, and fuel oil. It is the only petroleum refinery in Ghana. Over the years some of the equipment in the refinery has deteriorated or become obsolete necessitating major rehabilitation. A study of the refinery expansion project takes into consideration earlier studies and, equally important, recognizes the extensive work done by TOR in rehabilitating the refinery. The program, carried out in phases because of funding limitations, has addressed the critical repairs and replacements in the process unitsmore » and utilities necessary to prolong the life of the refinery and assure reliability and safe operation. It undertook the task of investigating the feasibility of modernizing and expanding the refinery at Tema, Ghana to meet projected market demands until the year 2005. A process planning study was conducted to select the optimal process and utility configuration which would result in economic benefits to Ghana.« less

Feasibility Study of a Vision-Based Landing System for Unmanned Fixed-Wing Aircraft

DTIC Science & Technology

2017-06-01

International Journal of Computer Science and Network Security 7 no. 3: 112–117. Accessed April 7, 2017. http://www.sciencedirect.com/science/ article /pii...the feasibility of applying computer vision techniques and visual feedback in the control loop for an autonomous system. This thesis examines the...integration into an autonomous aircraft control system. 14. SUBJECT TERMS autonomous systems, auto-land, computer vision, image processing

Conceptual design optimization study

NASA Technical Reports Server (NTRS)

Hollowell, S. J.; Beeman, E. R., II; Hiyama, R. M.

1990-01-01

The feasibility of applying multilevel functional decomposition and optimization techniques to conceptual design of advanced fighter aircraft was investigated. Applying the functional decomposition techniques to the conceptual design phase appears to be feasible. The initial implementation of the modified design process will optimize wing design variables. A hybrid approach, combining functional decomposition techniques for generation of aerodynamic and mass properties linear sensitivity derivatives with existing techniques for sizing mission performance and optimization, is proposed.

Development and feasibility study of very brief interventions for physical activity in primary care.

PubMed

Pears, Sally; Morton, Katie; Bijker, Maaike; Sutton, Stephen; Hardeman, Wendy

2015-04-08

There is increasing interest in brief and very brief behaviour change interventions for physical activity as they are potentially scalable to the population level. However, few very brief interventions (VBIs) have been published, and evidence is lacking about their feasibility, acceptability and which 'active ingredients' (behaviour change techniques) would maximise their effectiveness. The aim of this research was to identify and develop promising VBIs for physical activity and test their feasibility and acceptability in the context of preventive health checks in primary care. The process included two stages, guided by four criteria: effectiveness, feasibility, acceptability, and cost. In Stage 1, we used an iterative approach informed by systematic reviews, a scoping review of BCTs, team discussion, stakeholder consultation, a qualitative study, and cost estimation to guide the development of promising VBIs. In Stage 2, a feasibility study assessed the feasibility and acceptability of the short-listed VBIs, using tape-recordings and interviews with practitioners (n = 4) and patients (n = 68), to decide which VBIs merited further evaluation in a pilot trial. Four VBIs were short-listed: Motivational intervention; Action Planning intervention; Pedometer intervention; and Physical Activity Diary intervention. All were deliverable in around five minutes and were feasible and acceptable to participants and practitioners. Based on the results of interviews with practitioners and patients, techniques from the VBIs were combined into three new VBIs for further evaluation in a pilot trial. Using a two-stage approach, in which we considered the practicability of VBIs (acceptability, feasibility and cost) alongside potential efficacy from the outset, we developed a short-list of four promising VBIs for physical activity and demonstrated that they were acceptable and feasible as part of a preventive health check in primary care. Current Controlled Trials ISRCTN02863077. Registered 5 October 2012.

Feasibility of space disposal of radioactive nuclear waste. 2: Technical summary

NASA Technical Reports Server (NTRS)

1974-01-01

The feasibility of transporting radioactive waste produced in the process of generating electricity in nuclear powerplants into space for ultimate disposal was investigated at the request of the AEC as a NASA in-house effort. The investigation is part of a broad AEC study of methods for long-term storage or disposal of radioactive waste. The results of the study indicate that transporting specific radioactive wastes, particularly the actinides with very long half-lives, into space using the space shuttle/tug as the launch system, appears feasible from the engineering and safety viewpoints. The space transportation costs for ejecting the actinides out of the solar system would represent less than a 5-percent increase in the average consumer's electric bill.

Motivation Monitoring and Assessment Extension for Input-Process-Outcome Game Model

ERIC Educational Resources Information Center

Ghergulescu, Ioana; Muntean, Cristina Hava

2014-01-01

This article proposes a Motivation Assessment-oriented Input-Process-Outcome Game Model (MotIPO), which extends the Input-Process-Outcome game model with game-centred and player-centred motivation assessments performed right from the beginning of the game-play. A feasibility case-study involving 67 participants playing an educational game and…

Technical and Energy Performance of an Advanced, Aqueous Ammonia-Based CO2 Capture Technology for a 500 MW Coal-Fired Power Station.

PubMed

Li, Kangkang; Yu, Hai; Feron, Paul; Tade, Moses; Wardhaugh, Leigh

2015-08-18

Using a rate-based model, we assessed the technical feasibility and energy performance of an advanced aqueous-ammonia-based postcombustion capture process integrated with a coal-fired power station. The capture process consists of three identical process trains in parallel, each containing a CO2 capture unit, an NH3 recycling unit, a water separation unit, and a CO2 compressor. A sensitivity study of important parameters, such as NH3 concentration, lean CO2 loading, and stripper pressure, was performed to minimize the energy consumption involved in the CO2 capture process. Process modifications of the rich-split process and the interheating process were investigated to further reduce the solvent regeneration energy. The integrated capture system was then evaluated in terms of the mass balance and the energy consumption of each unit. The results show that our advanced ammonia process is technically feasible and energy-competitive, with a low net power-plant efficiency penalty of 7.7%.

Study of the Production of a Metallic Coating on Natural Fiber Composite Through the Cold Spray Technique

NASA Astrophysics Data System (ADS)

Astarita, Antonello; Boccarusso, Luca; Durante, Massimo; Viscusi, Antonio; Sansone, Raffaele; Carrino, Luigi

2018-02-01

The deposition of a metallic coating on hemp-PLA (polylactic acid) laminate through the cold spray technique was studied in this paper. A number of different combinations of the deposition parameters were tested to investigate the feasibility of the process. The feasibility of the process was proved when processing conditions are properly set. The bonding mechanism between the substrate and the first layer of particles was studied through scanning electron microscope observations, and it was found that the polymeric matrix experiences a huge plastic deformation to accommodate the impinging particles; conversely a different mechanism was observed when metallic powders impact against a previously deposited metallic layer. The difference between the bonding mechanism and the growth of the coating was also highlighted. Depending on the spraying parameters, four different processing conditions were highlighted and discussed, and as a result the processing window was defined. The mechanical properties of the composite panel before and after the deposition were also investigated. The experiments showed that when properly carried out, the deposition process does not affect the strength of the panel; moreover, no improvements were observed because the contribution of the coating is negligible with respect to one of the reinforcement fibers.

Accelerometry: A feasible method to monitor physical activity during sub-acute rehabilitation of persons with stroke.

PubMed

Joseph, Conran; Strömbäck, Björn; Hagströmer, Maria; Conradsson, David

2018-05-08

To investigate the feasibility of using accelerometers to monitor physical activity in persons with stroke admitted to inpatient rehabilitation. Longitudinal observational study. Persons with stroke admitted to a specialized rehabilitation centre for sub-acute rehabilitation were recruited between August and December 2016. Volume and intensity of physical activity were assessed with accelerometers throughout the rehabilitation period. Indicators of feasibility included processes (recruitment, protocol adherence and participants' experiences) and scientific feasibility, which assessed the accelerometers' ability to detect change in physical activity among stroke survivors who ambulate independently and those who are dependent on a mobility device. Twenty-seven out of 31 eligible individuals took part in this study, with 23 (85%) completing it. In total, 432 days of rehabilitation were monitored and valid physical activity data were obtained for 408 days (94%). There were no indications that the measurement interfered with participants' ability to participate in rehabilitation. Despite the subjects' ambulation status, the number of steps and time spent in moderate-to-vigorous physical activity increased significantly across the first 18 days of rehabilitation, whereas sedentary time was unchanged. This study supports the feasibility of using accelerometers to capture physical activity behaviour in survivors of stroke during inpatient rehabilitation.

High-strength N-methyl-2-pyrrolidone-containing process wastewater treatment using sequencing batch reactor and membrane bioreactor: A feasibility study.

PubMed

Loh, Chun Heng; Wu, Bing; Ge, Liya; Pan, Chaozhi; Wang, Rong

2018-03-01

N-methyl-2-pyrrolidone (NMP) is widely used as a solvent in polymeric membrane fabrication process, its elimination from the process wastewater (normally at a high concentration > 1000 mg/L) prior to discharge is essential because of environmental concern. This study investigated the feasibility of treating high-strength NMP-containing process wastewater in a sequencing batch reactor (SBR; i.e., batch feeding and intermittent aerobic/anoxic condition) and a membrane bioreactor (MBR; i.e., continuous feeding and aeration), respectively. The results showed that the SBR with the acclimated sludge was capable of removing >90% of dissolved organic carbon (DOC) and almost 98% of NMP within 2 h. In contrast, the MBR with the acclimated sludge showed a decreasing NMP removal efficiency from 100% to 40% over 15-day operation. The HPLC and LC-MS/MS analytical results showed that NMP degradation in SBR and MBR could undergo different pathways. This may be attributed to the dissimilar bacterial community compositions in the SBR and MBR as identified by 16s rRNA gene sequencing analysis. Interestingly, the NMP-degrading capability of the activated sludge derived from MBR could be recovered to >98% after they were operated at the SBR mode (batch feeding mode with intermittent aerobic/anoxic condition). This study reveals that SBR is probably a more feasible process to treat high-strength NMP-containing wastewater, but residual NMP metabolites in the SBR effluent need to be post-treated by an oxidation or adsorption process in order to achieve zero-discharge of toxic chemicals. Copyright © 2017 Elsevier Ltd. All rights reserved.

Adapting the concept of explanatory models of illness to the study of youth violence.

PubMed

Biering, Páll

2007-07-01

This study explores the feasibility of adapting Kleinman's concept of explanatory models of illness to the study of youth violence and is conducted within the hermeneutic tradition. Data were collected by interviewing 11 violent adolescents, their parents, and their caregivers. Four types of explanatory models representing the adolescent girls', the adolescent boys', the caregivers', and the parents' understanding of youth violence are found; they correspond sufficiently to Kleinman's concept and establish the feasibility of adapting it to the study of youth violence. The developmental nature of the parents' and adolescents' models makes it feasible to study them by means of hermeneutic methodology. There are some clinically significant discrepancies between the caregivers' and the clients' explanatory models; identifying such discrepancies is an essential step in the process of breaking down barriers to therapeutic communications. Violent adolescents should be encouraged to define their own explanatory models of violence through dialogue with their caregivers.

Pilot social feasibility study for the establishment of a public human umbilical cord blood stem cell bank in South Africa.

PubMed

Meissner-Roloff, Madelein; Young, Wendy; Rangaka, Isabella; Lombaard, Hennie; Dhai, Ames; Tsotsi, Norma; Pepper, Michael S

2012-12-01

There is a large unmet need in South Africa for bone marrow transplantation. Umbilical cord blood (UCB) is an important source of stem cells for the treatment of haematological and non-haematological diseases. Access to the two existing private umbilical cord blood stem cell banks (UCB SCBs) in South Africa is limited to individuals that can afford it, which further aggravates the ever increasing divide between families from different socio-economic classes. The problem is compounded by a severe global shortage of genetically compatible samples, representative of the South African demographics. Establishing a public human UCB SCB in South Africa would provide more South Africans with access to previously unavailable treatment in the form of affordable, genetically compatible stem cells for bone marrow transplantation. A public UCB SCB has many facets to consider, one of which is public preparedness and support for the bank. This was assessed in a social feasibility pilot study which is reported here. In addition to the findings of this social feasibility study, other important considerations for establishing a public human UCB SCB in SA include; (a) testing the samples for HIV and other infectious diseases (required for compliance with international regulatory standards); (b) flow cytometric analysis for enumeration of CD34+ UCB stem cells; (c) mapping of HLA genotypes/alleles; and (d) a study of the economic feasibility of this endeavour.The social feasibility study was conducted to gauge public preparedness and support for a public SCB through patient interviews and questionnaires. The process was dynamic due to its novel nature for interviewers and interviewees alike. Many obstacles were met and dealt with which lead to the compilation of results discussed here in the form of a pilot social feasibility study.In the South African context, we are faced with unique and rich challenges relating to cultural and religious differences that are further augmented by linguistic constraints, educational insufficiencies and logistical and administrative limitations. Complicating factors encountered during the informed consent process included cultural differences, religious practices, traditions and superstitions together with language constraints and an educational disparity.Despite many initial obstacles, preliminary results from the informed consent questionnaire were favourable with regard to the establishment of a public UCB SCB. These initial results prompted the revision of the questionnaire and interview process and the compilation of a more succinct and coherent definitive social feasibility study which will form a separate study and which we hope will ultimately assist in the decision of whether or not to establish a public UCB SCB in South Africa. Nevertheless, results from this pilot study appear to be favourable and highlight particular areas which could influence community support for a public SCB. Educating the general public with regard to the workings and benefits of public stem cell banking is the first step in determining the viability of such an undertaking-a unique and rich challenge in the South African context.

Real-Time Monitoring of Psychotherapeutic Processes: Concept and Compliance

PubMed Central

Schiepek, Günter; Aichhorn, Wolfgang; Gruber, Martin; Strunk, Guido; Bachler, Egon; Aas, Benjamin

2016-01-01

Objective: The feasibility of a high-frequency real-time monitoring approach to psychotherapy is outlined and tested for patients' compliance to evaluate its integration to everyday practice. Criteria concern the ecological momentary assessment, the assessment of therapy-related cognitions and emotions, equidistant time sampling, real-time nonlinear time series analysis, continuous participative process control by client and therapist, and the application of idiographic (person-specific) surveys. Methods: The process-outcome monitoring is technically realized by an internet-based device for data collection and data analysis, the Synergetic Navigation System. Its feasibility is documented by a compliance study on 151 clients treated in an inpatient and a day-treatment clinic. Results: We found high compliance rates (mean: 78.3%, median: 89.4%) amongst the respondents, independent of the severity of symptoms or the degree of impairment. Compared to other diagnoses, the compliance rate was lower in the group diagnosed with personality disorders. Conclusion: The results support the feasibility of high-frequency monitoring in routine psychotherapy settings. Daily collection of psychological surveys allows for the assessment of highly resolved, equidistant time series data which gives insight into the nonlinear qualities of therapeutic change processes (e.g., pattern transitions, critical instabilities). PMID:27199837

Feasibility of using continuous chromatography in downstream processing: Comparison of costs and product quality for a hybrid process vs. a conventional batch process.

PubMed

Ötes, Ozan; Flato, Hendrik; Winderl, Johannes; Hubbuch, Jürgen; Capito, Florian

2017-10-10

The protein A capture step is the main cost-driver in downstream processing, with high attrition costs especially when using protein A resin not until end of resin lifetime. Here we describe a feasibility study, transferring a batch downstream process to a hybrid process, aimed at replacing batch protein A capture chromatography with a continuous capture step, while leaving the polishing steps unchanged to minimize required process adaptations compared to a batch process. 35g of antibody were purified using the hybrid approach, resulting in comparable product quality and step yield compared to the batch process. Productivity for the protein A step could be increased up to 420%, reducing buffer amounts by 30-40% and showing robustness for at least 48h continuous run time. Additionally, to enable its potential application in a clinical trial manufacturing environment cost of goods were compared for the protein A step between hybrid process and batch process, showing a 300% cost reduction, depending on processed volumes and batch cycles. Copyright © 2017 Elsevier B.V. All rights reserved.

Reporting of feasibility factors in publications on integrated treatment programs for women with substance abuse issues and their children: a systematic review and analysis

PubMed Central

2012-01-01

Background Implementation of evidence-based practices in real-world settings is a complex process impacted by many factors, including intervention, dissemination, service provider, and organizational characteristics. Efforts to improve knowledge translation have resulted in greater attention to these factors. Researcher attention to the applicability of findings to applied settings also has increased. Much less attention, however, has been paid to intervention feasibility, an issue important to applied settings. Methods In a systematic review of 121documents regarding integrated treatment programs for women with substance abuse issues and their children, we examined the presence of feasibility-related information. Specifically, we analysed study descriptions for information regarding feasibility factors in six domains (intervention, practitioner, client, service delivery, organizational, and service system). Results On average, fewer than half of the 25 feasibility details assessed were included in the documents. Most documents included some information describing the participating clients, the services offered as part of the intervention, the location of services, and the expected length of stay or number of sessions. Only approximately half of the documents included specific information about the treatment model. Few documents indicated whether the intervention was manualized or whether the intervention was preceded by a standardized screening or assessment process. Very few provided information about the core intervention features versus the features open to local adaptation, or the staff experience or training required to deliver the intervention. Conclusions As has been found in reviews of intervention studies in other fields, our findings revealed that most documents provide some client and intervention information, but few documents provided sufficient information to fully evaluate feasibility. We consider possible explanations for the paucity of feasibility information and provide suggestions for better reporting to promote diffusion of evidence-based practices. PMID:23217025

Economic feasibility of biochemical processes for the upgrading of crudes and the removal of sulfur, nitrogen, and trace metals from crude oil -- Benchmark cost establishment of biochemical processes on the basis of conventional downstream technologies. Final report FY95

DOE Office of Scientific and Technical Information (OSTI.GOV)

Premuzic, E.T.

1996-08-01

During the past several years, a considerable amount of work has been carried out showing that microbially enhanced oil recovery (MEOR) is promising and the resulting biotechnology may be deliverable. At Brookhaven National Laboratory (BNL), systematic studies have been conducted which dealt with the effects of thermophilic and thermoadapted bacteria on the chemical and physical properties of selected types of crude oils at elevated temperatures and pressures. Current studies indicate that during the biotreatment several chemical and physical properties of crude oils are affected. The oils are (1) emulsified; (2) acidified; (3) there is a qualitative and quantitative change inmore » light and heavy fractions of the crudes; (4) there are chemical changes in fractions containing sulfur compounds; (5) there is an apparent reduction in the concentration of trace metals; and (6) the qualitative and quantitative changes appear to be microbial species dependent; and (7) there is a distinction between biodegraded and biotreated oils. The downstream biotechnological crude oil processing research performed thus far is of laboratory scale and has focused on demonstrating the technical feasibility of downstream processing with different types of biocatalysts under a variety of processing conditions. Quantitative economic analysis is the topic of the present project which investigates the economic feasibility of the various biochemical downstream processes which hold promise in upgrading of heavy crudes, such as those found in California, e.g., Monterey-type, Midway Sunset, Honda crudes, and others.« less

A Process Evaluation of Project Developmental Continuity, Interim Report VI: Recommendations for Continuing the Impact Study.

ERIC Educational Resources Information Center

Granville, Arthur; And Others

This interim report re-examines data on instrument suitability, comparability of groups, and adequacy of sample size in Year III of the process evaluation of Project Developmental Continuity (PDC) and offers preliminary recommendations concerning the feasibility of continuing the impact study. PDC is a Head Start demonstration program aimed at…

PRESERVATION OF FOOD BY LOW-DOSE IONIZING ENERGY

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1961-01-01

A review is presented of the current status of investigations on the radiation processing of foods. The technical feasibility of this preservation method is well established and the economic feasibility of the method appears promising, particularly in low-dose applications. The current status of development of radiation sources is discussed. Pork has responded best among the meats tested for radiation processing. Sausage, luncheon meats, and chicken demonstrate good potential. Beef appears acceptable at low radiation dose ranges but presents flavor problems at high dosages. The storage life of refrigerated and unrefrigerated marine products is increased by radiation processing, Vegetable s aremore » easily damaged by comparatively small doses of radiation. Shredded cabbage treated at 300,000 rad is an excellent product and asparagus, snap beans, lima beans, broccoli, carrots, and corn are promising vegetables for radiation processing. Radiation treatment inhibits sprouting of potatoes and onions. Radiation processing of strawberries, grapes, peaches, tomatoes, and citrus fruits at doses between 200,000 and 800,000 rad affects molds that cause rotting and increases the storage life of these fruits. Radiation processing of cereal grains, cereal products, and military ration components destroys adult insects, larvae, and eggs of insect pests that infest these foods. No radioactivity has been induced in food products by high radiation doses. Extensive studies have shown that radiation processing has no effect on the wholesomeness of foods. The economic feasibility and potentialities of the radiation processing of foods are discussed. (C.H.)« less

Adult Congenital Heart Disease-Coping And REsilience (ACHD-CARE): Rationale and methodology of a pilot randomized controlled trial.

PubMed

Kovacs, Adrienne H; Bandyopadhyay, Mimi; Grace, Sherry L; Kentner, Amanda C; Nolan, Robert P; Silversides, Candice K; Irvine, M Jane

2015-11-01

One-third of North American adults with congenital heart disease (CHD) have diagnosable mood or anxiety disorders and most do not receive mental health treatment. There are no published interventions targeting the psychosocial needs of patients with CHD of any age. We describe the development of a group psychosocial intervention aimed at improving the psychosocial functioning, quality of life, and resilience of adults with CHD and the design of a study protocol to determine the feasibility of a potential full-scale randomized controlled trial (RCT). Drawing upon our quantitative and qualitative research, we developed the Adult CHD-Coping And REsilience (ACHD-CARE) intervention and designed a feasibility study that included a 2-parallel arm non-blinded pilot RCT. Eligible participants (CHD, age ≥ 18 years, no planned surgery, symptoms suggestive of a mood and/or anxiety disorder) were randomized to the ACHD-CARE intervention or Usual Care (1:1 allocation ratio). The group intervention was delivered during eight 90-minute weekly sessions. Feasibility will be assessed in the following domains: (i) process (e.g. recruitment and retention), (ii) resources, (iii) management, (iv) scientific outcomes, and (v) intervention acceptability. This study underscores the importance of carefully developing and testing the feasibility of psychosocial interventions in medical populations before moving to full-scale clinical trials. At study conclusion, we will be poised to make one of three determinations for a full-scale RCT: (1) feasible, (2) feasible with modifications, or (3) not feasible. This study will guide the future evaluation and provision of psychosocial treatment for adults with CHD. Copyright © 2015. Published by Elsevier Inc.

Anticipatory precrash restraint sensor feasibility study: Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kercel, S.W.; Dress, W.B.

1995-08-01

This report explores feasibility of an anticipatory precrash restraint sensor. The foundation principle is the anticipation mechanism found at a primitive level of biological intelligence and originally formalized by the mathematical biologist Robert Rosen. A system based on formal anticipatory principles should significantly outperform conventional technologies. It offers the prospect of high payoff in prevention of death and injury. Sensors and processes are available to provide a good, fast, and inexpensive description of the present dynamical state of the vehicle to the embedded system model in the anticipation engine. The experimental part of this study found that inexpensive radar inmore » a real-world setting does return useful data on target dynamics. The data produced by a radar system can be converted to target dynamical information by good, fast and inexpensive signal-processing techniques. Not only is the anticipatory sensor feasible, but further development under the sponsorship of the National Highway Traffic Safety Administration is necessary and desirable. There are a number of possible lines of follow-on investigation. The level of effort and expected benefits of various alternatives are discussed.« less

Implementation of science process skills using ICT-based approach to facilitate student life skills

NASA Astrophysics Data System (ADS)

Rahayu, Y. S.; Yuliani; Wijaya, B. R.

2018-01-01

The purpose of this study is to describe the results of the implementation of a teaching-learning package in Plant Physiology courses to improve the student’s life skills using the science process skills-based approach ICT. This research used 15 students of Biology Education of Undergraduate International Class who are in the Plant Physiology course. This study consists of two phases items, namely the development phase and implementation phase by using a one-shot case study design. Research parameters were the feasibility of lesson plans, student achievement, Including academic skills, thinking skills, and social skills. Data were descriptively Analyzed According to the characteristics of the existing data. The result shows that the feasibility of a lesson plan is very satisfied and can be improvements in student’s life skills, especially with regards to student’s thinking skills and scientific thinking skills. The results indicate that the science process skills using ICT-based approach can be effective methods to improve student’s life skills.

Feasibility study of a microprocessor based oculometer system

NASA Technical Reports Server (NTRS)

Varanasi, M. R.

1981-01-01

The elimination of redundancy in data to maximize processing speed and minimize storage requirements were objectives in a feasibility study of a microprocessor based oculometer system that would be portable in size and flexible in use. The appropriate architectural design of the signal processor, improved optics, and the reduction of size, weight, and power to the system were investigated. A flow chart is presented showing the strategy of the design. The simulation for developing microroutines for the high speed algorithmic processor subsystem is discussed as well as the Karhunen-Loeve transform technique for data compression.

Leak Detection by Acoustic Emission Monitoring. Phase 1. Feasibility Study

DTIC Science & Technology

1994-05-26

various signal processing and noise descrimInation techniques during the Data Processing task. C. TEST DESCRIPTION 1. Laboratory Tests Following normal...success in applying these methods to descriminating between the AE bursts generated by two close AE sources In a section of an aircraft structure

Feasibility and acceptability of group music therapy vs wait-list control for treatment of patients with long-term depression (the SYNCHRONY trial): study protocol for a randomised controlled trial.

PubMed

Carr, Catherine Elizabeth; O'Kelly, Julian; Sandford, Stephen; Priebe, Stefan

2017-03-29

Depression is of significant global concern. Despite a range of effective treatment options it is estimated that around one in five diagnosed with an acute depressive episode continue to experience enduring symptoms for more than 2 years. There is evidence for effectiveness of individual music therapy for depression. However, no studies have as yet looked at a group intervention within an NHS context. This study aims to assess the feasibility of conducting a randomised controlled trial of group music therapy for patients with long-term depression (symptom durations of 1 year or longer) within the community. This is a single-centre randomised controlled feasibility trial of group music therapy versus wait-list control with a nested process evaluation. Thirty participants will be randomised with unbalanced allocation (20 to receive the intervention immediately, 10 as wait-list controls). Group music therapy will be offered three times per week in a community centre with a focus on songwriting. Data will be collected post-intervention, 3 and 6 months after the intervention finishes. We will examine the feasibility of recruitment processes including identifying the number of eligible participants, participation and retention rates and the intervention in terms of testing components, measuring adherence and estimation of the likely intervention effect. A nested process evaluation will consist of treatment fidelity analysis, exploratory analysis of process measures and end-of-participation interviews with participants and referring staff. Whilst group music therapy is an option in some community mental health settings, this will be the first study to examine group music therapy for this particular patient group. We will assess symptoms of depression, acceptability of the intervention and quality of life. We anticipate potential challenges in the recruitment and retention of participants. It is unclear whether offering the intervention three times per week will be acceptable to participants, particularly given participants' enduring symptoms and impact upon motivation. This study will provide data to inform both development of the intervention and to assess and inform the design of a full trial. ISRCTN.com, ISRCTN18164037 . Registered on 26 September 2016.

Cost analysis of Virginia system for processing accident data.

DOT National Transportation Integrated Search

1984-01-01

The objectives of this study were to identify present system costs and deficiencies, determine the economic feasibility of alternative system configurations, and make recommendations for improvements. The study focused on the procedures used to proce...

[Feasibility study for whole plant medicinal use of Tribulus terrestris].

PubMed

Yang, Li; Wang, Chunyu; Han, Meiw; Yang, Limin

2009-09-01

The content differences of leaf, plant and fruit of Tribulus terrestris was compared to study the feasibility of whole plant medicinal use. The samples were collected in three typical habitats and six different production areas of T. terrestris. The main medicinal ingredients saponins and flavonoids were determined in root, stem, leaf and fruit during the harvest time. The two ingredients were abounded in leaf and more than 2.61 times as in other parts of the plant. The results showed that there were no differences between the whole plant and the fruit. It should pay more attentions on the collection, preservation and utilization of the leaf of T. terrestris in the harvesting and processing stage. The whole plant for medical use was feasibility based on the content of the ingredients.

Cognitive Enhancement Therapy for Adults with Autism Spectrum Disorder: Results of an 18-Month Feasibility Study

PubMed Central

Eack, Shaun M.; Greenwald, Deborah P.; Hogarty, Susan S.; Bahorik, Amber L.; Litschge, Maralee Y.; Mazefsky, Carla A.; Minshew, Nancy J.

2013-01-01

Adults with autism experience significant impairments in social and non-social information processing for which few treatments have been developed. This study conducted an 18-month uncontrolled trial of Cognitive Enhancement Therapy (CET), a comprehensive cognitive rehabilitation intervention, in 14 verbal adults with autism spectrum disorder to investigate its feasibility, acceptability, and initial efficacy in treating these impairments. Results indicated that CET was satisfying to participants, with high treatment attendance and retention. Effects on cognitive deficits and social behavior were also large (d = 1.40 to 2.29) and statistically significant (all p < .001). These findings suggest that CET is a feasible, acceptable, and potentially effective intervention for remediating the social and non-social cognitive impairments in verbal adults with autism. PMID:23619953

Process feasibility study in support of silicon material task 1

NASA Technical Reports Server (NTRS)

Yaws, C. L.; Li, K. Y.; Hopper, J. R.; Fang, C. S.; Hansen, K. C.

1981-01-01

Results for process system properties, chemical engineering and economic analyses of the new technologies and processes being developed for the production of lower cost silicon for solar cells are presented. Analyses of process system properties are important for chemical materials involved in the several processes under consideration for semiconductor and solar cell grade silicon production. Major physical, thermodynamic and transport property data are reported for silicon source and processing chemical materials.

Implementing a collaborative coaching intervention for professionals providing care to children and their families: An exploratory study.

PubMed

Tatla, Sandy K; Howard, Dori; Antunes Silvestre, Alda; Burnes, Stacey; Husson, Meghan; Jarus, Tal

2017-09-01

The growing complexity of healthcare requires family and interprofessional partnerships to deliver effective care. Interprofessional coaching can enhance family-centred practice and collaboration. The purpose of this study was to explore the acceptability and feasibility of collaborative coaching training to improve family centredness within acute paediatric rehabilitation. Using a participatory action design, service providers (SPs; n = 36) underwent a 6-month coaching programme involving coaching workshops, learning triads, and tailored sessions with a licensed coach. The feasibility and acceptability of coaching on SPs' family interactions and care was explored. Measure of Processes of Care (MPOC) and MPOC-SP, a coaching skills questionnaire, and focus groups were used to evaluate the acceptability of coaching training. We found that structured coaching training was feasible and SPs reported significant improvements in their coaching skills; however, MPOC and MPOC-SP scores did not reveal significant differences. Qualitative themes indicated that clinicians are developing coaching competencies and applying these skills in clinical practice. Participants perceived that the coaching approach strengthened relationships amongst colleagues, and they valued the opportunity for interprofessional learning. Findings suggest that coaching offers promise as an approach to facilitate successful patient outcomes and improve processes of care. Preliminary findings indicate that interprofessional coaching training is acceptable, feasible, and can significantly improve SP coaching skills and improve team cohesion. Further research to study the effects of coaching on interprofessional care using validated outcome measures and to assess the impact on service delivery is recommended.

Feasibility study of a single-blind randomised controlled trial of an occupational therapy intervention.

PubMed

Gantschnig, Brigitte E; Nilsson, Ingeborg; Fisher, Anne G; Künzle, Christoph; Page, Julie

2016-07-01

Several factors facilitate or hinder efficacy research in occupational therapy. Strategies are needed, therefore, to support the successful implementation of trials. To assess the feasibility of conducting a randomised controlled trial (RCT). The main feasibility objectives of this study were to assess the process, resources, management, and scientific basis of a trial RCT. A total of 10 occupational therapists, between the ages of 30 and 55 (M 43.4; SD 8.3) with seven to 26 years' (M 14.3; SD 6.1) experience, participated in this study. Qualitative data collected included minutes of meetings, reports, and field notes. The data were analysed based on the principles of content analysis, using feasibility objectives as the main categories. Data analysis revealed strengths in relation to retention and inclusion criteria of participants, the study protocol, study organisation, and the competence of researchers. Weaknesses were found related to recruitment, randomisation, data collection, time for training and communication, commitment, and design. The findings indicated that there are several factors which had a considerable impact on the implementation of an RCT in practice. However, it was useful to assess methods and procedures of the trial RCT as a basis to refine research plans.

Research translation to inform national health policies: learning from multiple perspectives in Uganda

PubMed Central

2011-01-01

Background Research and evidence can have an impact on policy and practice, resulting in positive outcomes. However, research translation is a complex, dynamic and non-linear process. Although universities in Africa play a major role in generating research evidence, their strategic approaches to influence health policies and decision making are weak. This study was conducted with the aim of understanding the process of translating research into policy in order to guide the strategic direction of Makerere University College of Health Sciences (MakCHS) and similar institutions in their quest to influence health outcomes nationally and globally. Methods A case study approach using 30 in-depth interviews with stakeholders involved in two HIV prevention research project was purposively selected. The study sought to analyze the research-to-policy discourses for the prevention of mother-to-child transmission (PMTCT) and safe male circumcision (SMC). The analysis sought to identify entry points, strengths and challenges for research-to-policy processes by interviewing three major groups of stakeholders in Uganda – researchers (8), policy makers (12) and media practitioners (12). Results Among the factors that facilitated PMTCT policy uptake and continued implementation were: shared platforms for learning and decision making among stakeholders, implementation pilots to assess feasibility of intervention, the emerging of agencies to undertake operations research and the high visibility of policy benefits to child survival. In contrast, SMC policy processes were stalled for over two years after the findings of the Uganda study was made public. Among other factors, policy makers demanded additional research to assess implementation feasibility of SMC within ordinary health system context. High level leaders also publicly contested the SMC evidence and the underlying values and messages – a situation that reduced the coalition of policy champions. Conclusions This study shows that effective translation of PMTCT and SMC research results demanded a “360 degree” approach to assembling additional evidence to inform the implementation feasibility for these two HIV prevention interventions. MakCHS and similar institutions should prioritize implementation research to guide the policy processes about the feasibility of implementing new and effective innovations (e.g. PMTCT or SMC) at a large scale in contexts that may be different from the research environments. PMID:21411000

Public Library Automation Report: 1984.

ERIC Educational Resources Information Center

Gotanda, Masae

Data processing was introduced to public libraries in Hawaii in 1973 with a feasibility study which outlined the candidate areas for automation. Since then, the Office of Library Services has automated the order procedures for one of the largest book processing centers for public libraries in the country; created one of the first COM…

Advanced radiator concepts feasibility demonstration

NASA Astrophysics Data System (ADS)

Rhee, Hyop S.; Begg, Lester; Wetch, Joseph R.; Juhasz, Albert J.

1991-01-01

An innovative pumped loop concept for 600 K space power system radiators is under development utilizing direct contact heat transfer, which facilitates repeated startup/shutdown of the power system without complex and time-consuming coolant thawing during power startup. The melting/freezing process of Li in a NaK flow was studied experimentally to demonstrate the Li/NaK radiator feasibility during startup (thawing) and shutdown (cold-trapping). Results of the vapor grown carbon fiber/composite thermal conductivity measurements are also presented.

Advanced radiator concepts feasibility demonstration

NASA Astrophysics Data System (ADS)

Rhee, Hyop S.; Begg, Lester; Wetch, Joseph R.; Juhasz, Albert J.

An innovative pumped loop concept for 600 K space power system radiators is under development utilizing direct contact heat transfer, which facilitates repeated startup/shutdown of the power system without complex and time-consuming coolant thawing during power startup. The melting/freezing process of Li in a NaK flow was studied experimentally to demonstrate the Li/NaK radiator feasibility during startup (thawing) and shutdown (cold-trapping). Results of the vapor grown carbon fiber/composite thermal conductivity measurements are also presented.

Feasibility study of a microwave radar system for agricultural inspection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Okelo-Odongo, S.

1994-10-03

The feasibility of an impulse radar system for agricultural inspection is investigated. This system would be able to quickly determine the quality of foodstuffs that are passed through the system. A prototype was designed at the Lawrence Livermore National Laboratory and this report discusses it`s evaluation. A variety of apples were used to test the system and preliminary data suggests that this technology holds promise for successful application on a large scale in food processing plants.

Colorado Academic Libraries Book Processing Center. Final Report, Phase I and Phase II (1 February 1967-30 April 1968).

ERIC Educational Resources Information Center

Leonard, Lawrence E.; And Others

This report summarizes the results of a fourteen-month study to (1) examine the feasibility of establishing a book processing center to serve the nine state-supported college and university libraries in Colorado and (2) conduct a simulation study of the proposed Center. The report covers: background, operational characteri tics of participating…

Solar energy concentrator system for crystal growth and zone refining in space

NASA Technical Reports Server (NTRS)

Mcdermit, J. H.

1975-01-01

The technological feasibility of using solar concentrators for crystal growth and zone refining in space has been performed. Previous studies of space-deployed solar concentrators were reviewed for their applicability to materials processing and a new state-of-the-art concentrator-receiver radiation analysis was developed. The radiation analysis is in the form of a general purpose computer program. It was concluded from this effort that the technology for fabricating, orbiting and deploying large solar concentrators has been developed. It was also concluded that the technological feasibility of space processing materials in the focal region of a solar concentrator depends primarily on two factors: (1) the ability of a solar concentrator to provide sufficient thermal energy for the process and (2) the ability of a solar concentrator to provide a thermal environment that is conductive to the processes of interest. The analysis indicate that solar concentrators can satisfactorily provide both of these factors.

Phase A design study of microgravity fluoride fiber puller

NASA Technical Reports Server (NTRS)

Workman, Gary L.; Smith, Guy A.; Kosten, Susan

1994-01-01

Improved transmission properties for fluoride fibers due to space processing has great potential for commercial benefits. Phase A design study will determine conceptual feasibility and provide initial definition of the technical requirements and design issues for space.

Animal feasibility study of an innovated splash-needle for endoscopic submucosal dissection in the upper gastrointestinal tract.

PubMed

Fujishiro, Mitsuhiro; Sugita, Noriyuki

2013-01-01

The high frequency of complications accompanying endoscopic submucosal dissection (ESD) and its complex processes suggest that the process requires improvement. The objective of the present study was to investigate the feasibility of an innovated splash-needle for ESD. An animal feasibility study with a living pig was conducted. Six resections per portion (esophagus and upper, middle, and lower thirds of the stomach) in a total of 24 resections were carried out by using an original splash-needle or an innovated splash-needle. Major innovations were a thicker part in the middle of the knife and a metal plate on the tip of the sheath to obtain more coagulation ability. Injection solution in the submucosal layer was also changed due to possible influence on the outcomes. Main outcome measurements were entire procedure time, cutting speed, and frequency of bleeding during ESD. All the 24 resections were completed without complications. Among the obtained data, only mean cutting speeds were significantly influenced by location of the simulated lesion, which revealed that ESD at the upper third was significantly quicker than that at the lower third (P = 0.01), and ESD at the esophagus was significantly slower than that at the three parts of the stomach (P < 0.01). There was no significant difference between the different knives in each variable. The innovated splash-needle will be feasible for human use, although the safety and advantages in clinical settings must be elucidated by proper comparative studies with existing knives in humans. © 2012 The Authors. Digestive Endoscopy © 2012 Japan Gastroenterological Endoscopy Society.

Exploring the Feasibility of Using Writing Process Features to Assess Text Production Skills. Research Report. ETS RR-15-26

ERIC Educational Resources Information Center

Deane, Paul; Zhang, Mo

2015-01-01

In this report, we examine the feasibility of characterizing writing performance using process features derived from a keystroke log. Using data derived from a set of "CBAL"™ writing assessments, we examine the following research questions: (a) How stable are the keystroke timing and process features across testing occasions?; (b) How…

RFID in the blood supply chain--increasing productivity, quality and patient safety.

PubMed

Briggs, Lynne; Davis, Rodeina; Gutierrez, Alfonso; Kopetsky, Matthew; Young, Kassandra; Veeramani, Raj

2009-01-01

As part of an overall design of a new, standardized RFID-enabled blood transfusion medicine supply chain, an assessment was conducted for two hospitals: the University of Iowa Hospital and Clinics (UIHC) and Mississippi Baptist Health System (MBHS). The main objectives of the study were to assess RFID technological and economic feasibility, along with possible impacts to productivity, quality and patient safety. A step-by-step process analysis focused on the factors contributing to process "pain points" (errors, inefficiency, product losses). A process re-engineering exercise produced blueprints of RFID-enabled processes to alleviate or eliminate those pain-points. In addition, an innovative model quantifying the potential reduction in adverse patient effects as a result of RFID implementation was created, allowing improvement initiatives to focus on process areas with the greatest potential impact to patient safety. The study concluded that it is feasible to implement RFID-enabled processes, with tangible improvements to productivity and safety expected. Based on a comprehensive cost/benefit model, it is estimated for a large hospital (UIHC) to recover investment from implementation within two to three years, while smaller hospitals may need longer to realize ROI. More importantly, the study estimated that RFID technology could reduce morbidity and mortality effects substantially among patients receiving transfusions.

Feasible Application Area Study for Linear Laser Cutting in Paper Making Processes

NASA Astrophysics Data System (ADS)

Happonen, A.; Stepanov, A.; Piili, H.

Traditional industry sectors, like paper making industry, tend to stay within well-known technology rather than going forward towards promising, but still quite new technical solutions and applications. This study analyses the feasibility of the laser cutting in large-scale industrial paper making processes. Aim was to reveal development and process related challenges and improvement potential in paper making processes by utilizing laser technology. This study has been carried out, because there still seems to be only few large-scale industrial laser processing applications in paper converting processes worldwide, even in the beginning of 2010's. Because of this, the small-scale use of lasers in paper material manufacturing industry is related to a shortage of well-known and widely available published research articles and published measurement data (e.g. actual achieved cut speeds with high quality cut edges, set-up times and so on). It was concluded that laser cutting has strong potential in industrial applications for paper making industries. This potential includes quality improvements and a competitive advantage for paper machine manufacturers and industry. The innovations have also added potential, when developing new paper products. An example of these kinds of products are ones with printed intelligence, which could be a new business opportunity for the paper industries all around the world.

Feasibility of commercial space manufacturing, production of pharmaceuticals. Volume 2: Technical analysis

NASA Technical Reports Server (NTRS)

1978-01-01

A technical analysis on the feasibility of commercial manufacturing of pharmaceuticals in space is presented. The method of obtaining pharmaceutical company involvement, laboratory results of the separation of serum proteins by the continuous flow electrophoresis process, the selection and study of candidate products, and their production requirements is described. The candidate products are antihemophilic factor, beta cells, erythropoietin, epidermal growth factor, alpha-1-antitrypsin and interferon. Production mass balances for antihemophelic factor, beta cells, and erythropoietin were compared for space versus ground operation. A conceptual description of a multiproduct processing system for space operation is discussed. Production requirements for epidermal growth factor of alpha-1-antitrypsin and interferon are presented.

Validity of Scientific Based Chemistry Android Module to Empower Science Process Skills (SPS) in Solubility Equilibrium

NASA Astrophysics Data System (ADS)

Antrakusuma, B.; Masykuri, M.; Ulfa, M.

2018-04-01

Evolution of Android technology can be applied to chemistry learning, one of the complex chemistry concept was solubility equilibrium. this concept required the science process skills (SPS). This study aims to: 1) Characteristic scientific based chemistry Android module to empowering SPS, and 2) Validity of the module based on content validity and feasibility test. This research uses a Research and Development approach (RnD). Research subjects were 135 s1tudents and three teachers at three high schools in Boyolali, Central of Java. Content validity of the module was tested by seven experts using Aiken’s V technique, and the module feasibility was tested to students and teachers in each school. Characteristics of chemistry module can be accessed using the Android device. The result of validation of the module contents got V = 0.89 (Valid), and the results of the feasibility test Obtained 81.63% (by the student) and 73.98% (by the teacher) indicates this module got good criteria.

9: ADAPTATION OF PREGNANCY RISK ASSESSMENT MONITORING SYSTEM (PRAMS) AND PROVIDE A MODEL ON IT

PubMed Central

Kharaghani, Roghieh; Shariati, Mohammad; Keramat, Afsaneh; Yunesian, Masud; Moghisi, Alireza

2017-01-01

Background and aims A surveillance system helps to detect epidemics and the pattern of the problems incidence in the community and it is essential part of evidence based decision making process. This study aimed to adapt of PRAMS and provide a model on it. Methods This study was performed in 7 steps as follows: Surveillance systems in pregnancy were reviewed and appropriate system was selected for Iran by nominal group technique. Two comparative studies were conducted to determine the similarities and differences between Iran and the selected community. PRAMS method and system were adapted based on the results of the comparative studies and experts opinions. The study tool was adapted. A field trial was conducted to assess adapted PRAMS feasibility based on TELOS (technical, economic, legal, operational, and schedule) model in the city of Shahriar, located in the west of Tehran, and to compare data collection methods. Then, based on the results and consultation with related executive managers, the final model of PRAMS was suggested for Iranian health system. Results Review of the surveillance systems in pregnancy, identified six models. The results of the nominal group technique showed that, the appropriate model for Iran is PRAMS. Based on the comparative studies and expert opinions, the appropriate system and method for program was as follows: the sampling frame was composed of data in thyroid screening forms and hospital records, the sampling method was systematic, data collection methods were home and phone based surveys, and participants were women within 2 to 6 months postpartum who had a live or still birth. The study tool was adapted. Thirty-seven health volunteers collected the data in this study (technical feasibility). Any home based completed questionnaire cost 2.45 and a phone cost 1.89 USD. Many indices were achieved from the study, which were worth much more than the expenses (economic feasibility). The project was consistent with legal requirements (legal feasibility). There was no statistically significant differences in mother's participation rate between phone (90.9%) and home visit (92.8%) groups and about 90.8% of different sections of the questionnaire were completed (operational feasibility). All data collection processes took 35 days (schedule feasibility). Based on the study results, the appropriate model of surveillance system was suggested with the goals of reducing infant morbidity and mortality and promoting maternal health by influencing maternal and child health programs, and maternal behaviors during pregnancy and early infancy. Conclusion The adapted PRAMS could be considered feasible in Iran and may offer a potential solution to some data deficits in maternal and child health indicators. Moreover, by monitoring pregnancy risks and outcomes, we can assess, analyses, and modify the current prenatal care program through PRAMS widespread and periodic implementation.

Economic feasibility study for improving drinking water quality: a case study of arsenic contamination in rural Argentina.

PubMed

Molinos-Senante, María; Perez Carrera, Alejo; Hernández-Sancho, Francesc; Fernández-Cirelli, Alicia; Sala-Garrido, Ramón

2014-12-01

Economic studies are essential in evaluating the potential external investment support and/or internal tariffs available to improve drinking water quality. Cost-benefit analysis (CBA) is a useful tool to assess the economic feasibility of such interventions, i.e. to take some form of action to improve the drinking water quality. CBA should involve the market and non-market effects associated with the intervention. An economic framework was proposed in this study, which estimated the health avoided costs and the environmental benefits for the net present value of reducing the pollutant concentrations in drinking water. We conducted an empirical application to assess the economic feasibility of removing arsenic from water in a rural area of Argentina. Four small-scale methods were evaluated in our study. The results indicated that the inclusion of non-market benefits was integral to supporting investment projects. In addition, the application of the proposed framework will provide water authorities with more complete information for the decision-making process.

Superoxide radical and UV irradiation in ultrasound assisted oxidative desulfurization (UAOD): A potential alternative for greener fuels

NASA Astrophysics Data System (ADS)

Chan, Ngo Yeung

This study is aimed at improving the current ultrasound assisted oxidative desulfurization (UAOD) process by utilizing superoxide radical as oxidant. Research was also conducted to investigate the feasibility of ultraviolet (UV) irradiation-assisted desulfurization. These modifications can enhance the process with the following achievements: (1) Meet the upcoming sulfur standards on various fuels including diesel fuel oils and residual oils; (2) More efficient oxidant with significantly lower consumption in accordance with stoichiometry; (3) Energy saving by 90%; (4) Greater selectivity in petroleum composition. Currently, the UAOD process and subsequent modifications developed in University of Southern California by Professor Yen's research group have demonstrated high desulfurization efficiencies towards various fuels with the application of 30% wt. hydrogen peroxide as oxidant. The UAOD process has demonstrated more than 50% desulfurization of refractory organic sulfur compounds with the use of Venturella type catalysts. Application of quaternary ammonium fluoride as phase transfer catalyst has significantly improved the desulfurization efficiency to 95%. Recent modifications incorporating ionic liquids have shown that the modified UAOD process can produce ultra-low sulfur, or near-zero sulfur diesels under mild conditions with 70°C and atmospheric pressure. Nevertheless, the UAOD process is considered not to be particularly efficient with respect to oxidant and energy consumption. Batch studies have demonstrated that the UAOD process requires 100 fold more oxidant than the stoichiometic requirement to achieve high desulfurization yield. The expected high costs of purchasing, shipping and storage of the oxidant would reduce the practicability of the process. The excess use of oxidant is not economically desirable, and it also causes environmental and safety issues. Post treatments would be necessary to stabilize the unspent oxidant residual to prevent the waste stream from becoming reactive or even explosive. High energy consumption is another drawback in the UAOD process. A typical 10 minutes ultrasonication applied in the UAOD process to achieve 95% desulfurization for 20g of diesel requires 450 kJ of energy, which is equivalent to approximately 50% of the energy that can be provided by the treated diesel. This great expenditure of energy is impractical for industries to adopt. In this study, modifications of the UAOD process, including the application of superoxide and selection of catalysts, were applied to lower the oxidant dosage and to improve the applicability towards heavy-distillates such as residual oil. The results demonstrated that the new system required 80% less oxidant as compared to previous generations of UAOD process without the loss of desulfurization efficiency. The new system demonstrated its suitability towards desulfurizing commercial mid-distillates including jet fuels, marine gas oil and sour diesel. This process also demonstrated a new method to desulfurize residual oil with high desulfurization yields. The new process development has been supported by Eco Energy Solutions Inc., Reno, Nevada and Intelligent Energy Inc., Long Beach, California. A feasibility study on UV assisted desulfurization by replacing ultrasound with UV irradiation was also conducted. The study demonstrated that the UV assisted desulfurization process consumes 90% less energy than the comparable process using ultrasonication. These process modifications demonstrated over 98% desulfurization efficiency on diesel oils and more than 75% on residual oils with significantly less oxidant and energy consumption. Also the feasibility to desulfurize commercial sour heavy oil was demonstrated. Based on the UAOD process and the commercialized modifications by Wan and Cheng, the feasible applications of superoxide and UV irradiation in the UAOD process could provide deep-desulfurization on various fuels with practical cost.

Feasibility study for mega-electron-volt electron beam tomography.

PubMed

Hampel, U; Bärtling, Y; Hoppe, D; Kuksanov, N; Fadeev, S; Salimov, R

2012-09-01

Electron beam tomography is a promising imaging modality for the study of fast technical processes. But for many technical objects of interest x rays of several hundreds of keV energy are required to achieve sufficient material penetration. In this article we report on a feasibility study for fast electron beam computed tomography with a 1 MeV electron beam. The experimental setup comprises an electrostatic accelerator with beam optics, transmission target, and a single x-ray detector. We employed an inverse fan-beam tomography approach with radiographic projections being generated from the linearly moving x-ray source. Angular projections were obtained by rotating the object.

Feasibility study for production of I-131 radioisotope using MNSR research reactor.

PubMed

Elom Achoribo, A S; Akaho, Edward H K; Nyarko, Benjamin J B; Osae Shiloh, K D; Odame Duodu, Godfred; Gibrilla, Abass

2012-01-01

A feasibility study for (131)I production using a Low Power Research Reactor was conducted to predict the yield of (131)I by cyclic activation technique. A maximum activity of 5.1GBq was achieved through simulation using FORTRAN 90, for an irradiation of 6h. But experimentally only 4h irradiation could be done, which resulted in an activity of 4.0×10(5)Bq. The discrepancy in the activities was due to the fact that beta decays released during the process could not be considered. Copyright © 2011 Elsevier Ltd. All rights reserved.

Process research on non-CZ silicon material

NASA Technical Reports Server (NTRS)

1982-01-01

High risk, high payoff research areas associated with he process for producing photovoltaic modules using non-CZ sheet material are investigated. All investigations are being performed using dendritic web silicon, but all processes are directly applicable to other ribbon forms of sheet material. The technical feasibility of forming front and back junctions in non-CZ silicon using liquid dopant techniques was determined. Numerous commercially available liquid phosphorus and boron dopant solutions are investigated. Temperature-time profiles to achieve N(+) and P(+) sheet resistivities of 60 + or - 10 and 40 + or - s10 ohms per square centimeter respectively are established. A study of the optimal method of liquid dopant application is performed. The technical feasibility of forming a liquid applied diffusion mask to replace the more costly chemical vapor deposited SiO2 diffusion mask was also determined.

Speech-Processing Fatigue in Children: Auditory Event-Related Potential and Behavioral Measures

ERIC Educational Resources Information Center

Key, Alexandra P.; Gustafson, Samantha J.; Rentmeester, Lindsey; Hornsby, Benjamin W. Y.; Bess, Fred H.

2017-01-01

Purpose: Fatigue related to speech processing is an understudied area that may have significant negative effects, especially in children who spend the majority of their school days listening to classroom instruction. Method: This study examined the feasibility of using auditory P300 responses and behavioral indices (lapses of attention and…

Use of Networked Collaborative Concept Mapping To Measure Team Processes and Team Outcomes.

ERIC Educational Resources Information Center

Chung, Gregory K. W. K.; O'Neil, Harold F., Jr.; Herl, Howard E.; Dennis, Robert A.

The feasibility of using a computer-based networked collaborative concept mapping system to measure teamwork skills was studied. A concept map is a node-link-node representation of content, where the nodes represent concepts and links represent relationships between connected concepts. Teamwork processes were examined for a group concept mapping…

Simultaneous junction formation

NASA Technical Reports Server (NTRS)

Campbell, R. B.

1984-01-01

High-risk, high-payoff improvements to a baseline process sequence of simultaneous junction formation of silicon solar cells are discussed. The feasibility of simultaneously forming front and back junctions of solar cells using liquid dopants on dendritic web silicon was studied. Simultaneous diffusion was compared to sequential diffusion. A belt furnace for the diffusion process was tested.

Fluidized bed gasification of industrial solid recovered fuels.

PubMed

Arena, Umberto; Di Gregorio, Fabrizio

2016-04-01

The study evaluates the technical feasibility of the fluidized bed gasification of three solid recovered fuels (SRFs), obtained as co-products of a recycling process. The SRFs were pelletized and fed to a pilot scale bubbling fluidized bed reactor, operated in gasification and co-gasification mode. The tests were carried out under conditions of thermal and chemical steady state, with a bed of olivine particles and at different values of equivalence ratio. The results provide a complete syngas characterization, in terms of its heating value and composition (including tars, particulates, and acid/basic pollutants) and of the chemical and physical characterization of bed material and entrained fines collected at the cyclone outlet. The feasibility of the fluidized bed gasification process of the different SRFs was evaluated with the support of a material and substance flow analysis, and a feedstock energy analysis. The results confirm the flexibility of fluidized bed reactor, which makes it one of the preferable technologies for the gasification of different kind of wastes, even in co-gasification mode. The fluidized bed gasification process of the tested SRFs appears technically feasible, yielding a syngas of valuable quality for energy applications in an appropriate plant configuration. Copyright © 2016 Elsevier Ltd. All rights reserved.

Digital technology to facilitate Proactive Assessment of Obesity Risk during Infancy (ProAsk): a feasibility study

PubMed Central

Rose, Jennie; Ablewhite, Joanne; Swift, Judy Anne; Nathan, Dilip; Atkinson, Pippa; Watson, Vicki; McMaster, Fiona

2017-01-01

Objective To assess the feasibility and acceptability of using digital technology for Proactive Assessment of Obesity Risk during Infancy (ProAsk) with the UK health visitors (HVs) and parents. Design Multicentre, pre- and post-intervention feasibility study with process evaluation. Setting Rural and urban deprived settings, UK community care. Participants 66 parents of infants and 22 HVs. Intervention ProAsk was delivered on a tablet device. It comprises a validated risk prediction tool to quantify overweight risk status and a therapeutic wheel detailing motivational strategies for preventive parental behaviour. Parents were encouraged to agree goals for behaviour change with HVs who received motivational interviewing training. Outcome measures We assessed recruitment, response and attrition rates. Demographic details were collected, and overweight risk status. The proposed primary outcome measure was weight-for-age z-score. The proposed secondary outcomes were parenting self-efficacy, maternal feeding style, infant diet and exposure to physical activity/sedentary behaviour. Qualitative interviews ascertained the acceptability of study processes and intervention fidelity. Results HVs screened 324/589 infants for inclusion in the study and 66/226 (29%) eligible infants were recruited. Assessment of overweight risk was completed on 53 infants and 40% of these were identified as above population risk. Weight-for-age z-score (SD) between the infants at population risk and those above population risk differed significantly at baseline (−0.67 SD vs 0.32 SD). HVs were able to collect data and calculate overweight risk for the infants. Protocol adherence and intervention fidelity was a challenge. HVs and parents found the information provided in the therapeutic wheel appropriate and acceptable. Conclusion Study recruitment and protocol adherence were problematic. ProAsk was acceptable to most parents and HVs, but intervention fidelity was low. There was limited evidence to support the feasibility of implementing ProAsk without significant additional resources. A future study could evaluate ProAsk as a HV-supported, parent-led intervention. Trial registration number NCT02314494 (Feasibility Study Results) PMID:28882926

Remedial Investigation/Feasibility Study (RI/FS) process, elements and techniques guidance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This manual provides detailed guidance on Remedial Investigation/Feasibility Studies (RI/FSs) conducted pursuant to the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) at Department of Energy (DOE) facilities. The purpose of the RI/FS, to assess the risk posed by a hazardous waste site and to determine the best way to reduce that risk, and its structure (site characterization, risk assessment, screening and detailed analysis of alternatives, etc.) is defined in the National Oil and Hazardous Substances Pollution Contingency Plan (NCP) and further explained in the Environmental Protection Agency`s (EPA`s) Guidance for Conducting Remedial Investigations and Feasibility Studies Under CERCLA (Interimmore » Final) 540/G-89/004, OSWER Directive 9355.3-01, October 1988. Though issued in 1988, the EPA guidance remains an excellent source of information on the conduct and structure of an RI/FS. This document makes use of supplemental RI/FS-related guidance that EPA has developed since its initial document was issued in 1988, incorporates practical lessons learned in more than 12 years of experience in CERCLA hazardous site remediation, and drawing on those lessons, introduces the Streamlined Approach For Environmental Restoration (SAFER), developed by DOE as a way to proceed quickly and efficiently through the RI/FS process at DOE facilities. Thus as its title implies, this guidance is intended to describe in detail the process and component elements of an RI/FS, as well as techniques to manage the RI/FS effectively.« less

Biodiesel Production using Heterogeneous Catalyst in CSTR: Sensitivity Analysis and Optimization

NASA Astrophysics Data System (ADS)

Keong, L. S.; Patle, D. S.; Shukor, S. R.; Ahmad, Z.

2016-03-01

Biodiesel as a renewable fuel has emerged as a potential replacement for petroleum-based diesels. Heterogeneous catalyst has become the focus of researches in biodiesel production with the intention to overcome problems associated with homogeneous catalyzed processes. The simulation of heterogeneous catalyzed biodiesel production has not been thoroughly studied. Hence, a simulation of carbon-based solid acid catalyzed biodiesel production from waste oil with high FFA content (50 weight%) was developed in the present work to study the feasibility and potential of the simulated process. The simulated process produces biodiesel through simultaneous transesterification and esterification with the consideration of reaction kinetics. The developed simulation is feasible and capable to produce 2.81kmol/hr of FAME meeting the international standard (EN 14214). Yields of 68.61% and 97.19% are achieved for transesterification and esterification respectively. Sensitivity analyses of FFA composition in waste oil, methanol to oil ratio, reactor pressure and temperature towards FAME yield from both reactions were carried out. Optimization of reactor temperature was done to maximize FAME products.

Vaginal Prostate Specific Antigen (PSA) Is a Useful Biomarker of Semen Exposure Among HIV-Infected Ugandan Women.

PubMed

Woolf-King, Sarah E; Muyindike, Winnie; Hobbs, Marcia M; Kusasira, Adrine; Fatch, Robin; Emenyonu, Nneka; Johnson, Mallory O; Hahn, Judith A

2017-07-01

The practical feasibility of using prostate specific antigen (PSA) as a biomarker of semen exposure was examined among HIV-infected Ugandan women. Vaginal fluids were obtained with self-collected swabs and a qualitative rapid test (ABAcard ® p30) was used to detect PSA. Trained laboratory technicians processed samples on-site and positive PSA tests were compared to self-reported unprotected vaginal sex (UVS) in the last 48 h. A total of 77 women submitted 126 samples for PSA testing at up to three study visits. Of these samples, 31 % (n = 39/126) were PSA positive, and 64 % (n = 25/39) of the positive PSA samples were accompanied by self-report of no UVS at the study visit the PSA was collected. There were no reported difficulties with specimen collection, storage, or processing. These findings provide preliminary data on high levels of misreported UVS among HIV-infected Ugandan women using practically feasible methods for PSA collection and processing.

The “Health Coaching” programme: a new patient-centred and visually supported approach for health behaviour change in primary care

PubMed Central

2013-01-01

Background Health related behaviour is an important determinant of chronic disease, with a high impact on public health. Motivating and assisting people to change their unfavourable health behaviour is thus a major challenge for health professionals. The objective of the study was to develop a structured programme of counselling in primary care practice, and to test its feasibility and acceptance among general practitioners (GPs) and their patients. Methods Our new concept integrates change of roles, shared responsibility, patient-centredness, and modern communication techniques—such as motivational interviewing. A new colour-coded visual communication tool is used for the purpose of leading through the 4-step counselling process. As doctors’ communication skills are crucial, communication training is a mandatory part of the programme. We tested the feasibility and acceptance of the “Health Coaching” programme with 20 GPs and 1045 patients, using questionnaires and semistructured interviewing techniques. The main outcomes were participation rates; the duration of counselling; patients’ self-rated behavioural change in their areas of choice; and ratings of motivational, conceptual, acceptance, and feasibility issues. Results In total, 37% (n=350) of the patients enrolled in step 1 completed the entire 4-Step counselling process, with each step taking 8–22 minutes. 50% of ratings (n=303) improved by one or two categories in the three-colour circle, and the proportion of favourable health behaviour ratings increased from 9% to 39%. The ratings for motivation, concept, acceptance, and feasibility of the “Health Coaching” programme were consistently high. Conclusions Our innovative, patient-centred counselling programme for health behaviour change was well accepted and feasible among patients and physicians in a primary care setting. Randomised controlled studies will have to establish cost-effectiveness and promote dissemination. PMID:23865509

The "Health Coaching" programme: a new patient-centred and visually supported approach for health behaviour change in primary care.

PubMed

Neuner-Jehle, Stefan; Schmid, Margareta; Grüninger, Ueli

2013-07-17

Health related behaviour is an important determinant of chronic disease, with a high impact on public health. Motivating and assisting people to change their unfavourable health behaviour is thus a major challenge for health professionals. The objective of the study was to develop a structured programme of counselling in primary care practice, and to test its feasibility and acceptance among general practitioners (GPs) and their patients. Our new concept integrates change of roles, shared responsibility, patient-centredness, and modern communication techniques-such as motivational interviewing. A new colour-coded visual communication tool is used for the purpose of leading through the 4-step counselling process. As doctors' communication skills are crucial, communication training is a mandatory part of the programme. We tested the feasibility and acceptance of the "Health Coaching" programme with 20 GPs and 1045 patients, using questionnaires and semistructured interviewing techniques. The main outcomes were participation rates; the duration of counselling; patients' self-rated behavioural change in their areas of choice; and ratings of motivational, conceptual, acceptance, and feasibility issues. In total, 37% (n=350) of the patients enrolled in step 1 completed the entire 4-Step counselling process, with each step taking 8-22 minutes. 50% of ratings (n=303) improved by one or two categories in the three-colour circle, and the proportion of favourable health behaviour ratings increased from 9% to 39%. The ratings for motivation, concept, acceptance, and feasibility of the "Health Coaching" programme were consistently high. Our innovative, patient-centred counselling programme for health behaviour change was well accepted and feasible among patients and physicians in a primary care setting. Randomised controlled studies will have to establish cost-effectiveness and promote dissemination.

Feasibility of Applying Ohmic Heating and Split-Phase Aseptic Processing for Ration Entree Preservation

DTIC Science & Technology

1994-08-01

study demonstrated that either of these reduced- temperature sterilization processes will produce an acceptable product that is an alternative to thermal...and uniform heating of liquids and solids simultaneously, even of large particles, up to sterilization temperatures . Uniform heating means shorter...potential cost reduction by substitution of continuous processing of a high- temperature /short-time ( HTST ) nature for traditional batch retort

Computer control improves ethylene plant operation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitehead, B.D.; Parnis, M.

ICIA Australia ordered a turnkey 250,000-tpy ethylene plant to be built at the Botany site, Sydney, Australia. Following a feasibility study, an additional order was placed for a process computer system for advanced process control and optimization. This article gives a broad outline of the process computer tasks, how the tasks were implemented, what problems were met, what lessons were learned and what results were achieved.

Pilot evaluation of a method to assess prescribers' information processing of medication alerts.

PubMed

Russ, Alissa L; Melton, Brittany L; Daggy, Joanne K; Saleem, Jason J

2017-02-01

Prescribers commonly receive alerts during medication ordering. Prescribers work in a complex, time-pressured environment; to enhance the effectiveness of safety alerts, the effort needed to cognitively process these alerts should be minimized. Methods to evaluate the extent to which computerized alerts support prescribers' information processing are lacking. To develop a methodological protocol to assess the extent to which alerts support prescribers' information processing at-a-glance; specifically, the incorporation of information into their working memory. We hypothesized that the method would be feasible and that we would be able to detect a significant difference in prescribers' information processing with a revised alert display that incorporates warning design guidelines compared to the original alert display. A counterbalanced, within-subject study was conducted with 20 prescribers in a human-computer interaction laboratory. We tested a single alert that was displayed in two different ways. Prescribers were informed that an alert would appear for 10s. After the alert was shown, a white screen was displayed, and prescribers were asked to verbally describe what they saw; indicate how many total warnings; and describe anything else they remembered about the alert. We measured information processing via the accuracy of prescribers' free recall and their ability to identify that three warning messages were present. Two analysts independently evaluated participants' responses against a comprehensive catalog of alert elements and then discussed discrepancies until reaching consensus. This feasibility study demonstrated that the method seemed to be effective for evaluating prescribers' information processing of medication alert displays. With this method, we were able to detect significant differences in prescribers' recall of alert information. The proportion of total data elements that prescribers were able to accurately recall was significantly greater for the revised versus original alert display (p=0.006). With the revised display, more prescribers accurately reported that three warnings were shown (p=0.002). The methodological protocol was feasible for evaluating the alert display and yielded important findings on prescribers' information processing. Study methods supplement traditional usability evaluation methods and may be useful for evaluating information processing of other healthcare technologies. Published by Elsevier Inc.

A feasibility study for Arizona's roadway safety management process using the Highway Safety Manual and SafetyAnalyst : final report.

DOT National Transportation Integrated Search

2016-07-01

To enable implementation of the American Association of State Highway Transportation (AASHTO) Highway Safety Manual using : SaftetyAnalyst (an AASHTOWare software product), the Arizona Department of Transportation (ADOT) studied the data assessment :...

Economic feasibility of the sugar beet-to-ethylene value chain.

PubMed

Althoff, Jeroen; Biesheuvel, Kees; De Kok, Ad; Pelt, Henk; Ruitenbeek, Matthijs; Spork, Ger; Tange, Jan; Wevers, Ronald

2013-09-01

As part of a long-term strategy toward renewable feedstock, a feasibility study into options for the production of bioethylene by integrating the sugar beet-to-ethanol-to-ethylene value chain. Seven business cases were studied and tested for actual economic feasibility of alternative sugar-to-ethanol-to-ethylene routes in comparison to fossil-fuel alternatives. An elaborate model was developed to assess the relevant operational and financial aspects of each business case. The calculations indicate that bioethylene from sugar beet is not commercially viable under current market conditions. In light of expected global energy and feedstock prices it is also reasonable to expect that this will not change in the near future. To consider biorenewable sources as starting material, they need to be low in cost (compared to sugar beets) and also require less capital and energy-intensive methods for the conversion to chemicals. In general, European sugar prices will be too high for many chemical applications. Future efforts for in sugar-to-chemicals routes should, therefore, focus on integrated process routes and process intensification and/or on products that contain a significant part of the original carbohydrate backbone. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Feasibility study and sensory test of turmeric tamarind traditional drink with various processing

NASA Astrophysics Data System (ADS)

Rudyatmi, E.; Bintari, S. H.; Iswari, R. S.

2018-03-01

Turmeric tamarind traditional drink as anti-oxidant, good for health, and has a potency to developed. The objectives of this study are to determine the feasibility and the favorite level of consumer towards two turmerics tamarind traditional drink which processed differently. Feasibility depended on sensory test and microbe's contamination according to a quality standard of BPOM and complemented with an anti-bacterial test. The anti-bacterial test is determined by a diameter of inhibition zone towards E coli and B subtilist. Consumer’s favorites level is determined by organoleptic test to 40 testers. Sensory test results to form, odor, taste, and color are normal. TPC first traditional drink 6,9 x 102 col/gr and TKK ≤1,0x10 col/gr, TPC second traditional drink 2,0 x 101 col/gr and TKK ≤1,0x10 col/gr; all tests toward E coli, Salmonella SP, Staphylococcus aureus, Pseudomonas aeruginosa, shigella sp negative/gr; inhibiting capabilities towards B.subtilis and E coli of first traditional drink > second traditional drink. Inhibiting capabilities towards B.subtilis > E coli. All parameters comply with BPOM standard. Most of the tester love the first method turmeric tamarind traditional drink.

Feasibility and Effectiveness of Using Wearable Activity Trackers in Youth: A Systematic Review

PubMed Central

McNarry, Melitta A; Mackintosh, Kelly A

2016-01-01

Background The proliferation and popularity of wearable activity trackers (eg, Fitbit, Jawbone, Misfit) may present an opportunity to integrate such technology into physical activity interventions. While several systematic reviews have reported intervention effects of using wearable activity trackers on adults’ physical activity levels, none to date have focused specifically on children and adolescents. Objective The aim of this review was to examine the effectiveness of wearable activity trackers as a tool for increasing children’s and adolescents’ physical activity levels. We also examined the feasibility of using such technology in younger populations (age range 5-19 years). Methods We conducted a systematic search of 5 electronic databases, reference lists, and personal archives to identify articles published up until August 2016 that met the inclusion criteria. Articles were included if they (1) specifically examined the use of a wearable device within an intervention or a feasibility study; (2) included participants aged 5-19 years old; (3) had a measure of physical activity as an outcome variable for intervention studies; (4) reported process data concerning the feasibility of the device in feasibility studies; and (5) were published in English. Data were analyzed in August 2016. Results In total, we identified and analyzed 5 studies (3 intervention, 2 feasibility). Intervention delivery ranged from 19 days to 3 months, with only 1 study using a randomized controlled trial design. Wearable activity trackers were typically combined with other intervention approaches such as goal setting and researcher feedback. While intervention effects were generally positive, the reported differences were largely nonsignificant. The feasibility studies indicated that monitor comfort and design and feedback features were important factors to children and adolescents. Conclusions There is a paucity of research concerning the effectiveness and feasibility of wearable activity trackers as a tool for increasing children’s and adolescents’ physical activity levels. While there are some preliminary data to suggest these devices may have the potential to increase activity levels through self-monitoring and goal setting in the short term, more research is needed to establish longer-term effects on behavior. PMID:27881359

Transient Evolution of a Planar Diffusion Flame Aft of a Translating Flat Plate

NASA Technical Reports Server (NTRS)

Gokoglu, Suleyman A.

2003-01-01

The high degree of spatial symmetry of a planar diffusion flame affords great simplifications for experimental and modeling studies of gaseous fuel combustion. Particularly, in a microgravity environment, where buoyancy effects are negligible, an effectively strain-rate-free, vigorous flame may be obtained. Such a flame can also provide long residence times and large length scales for practical probing of flame structures and soot processes. This 2-D numerical study explores the feasibility of establishing such a planar diffusion flame in an enclosed container utilizing a realistic test protocol for a microgravity experiment. Fuel and oxygen mixtures, initially segregated into two half-volumes of a squat rectangular container by a thin separator, are ignited as soon as a flammable mixture is formed in the wake of the separator withdrawn in the centerplane. A triple-flame ensues that propagates behind the trailing edge of the separator. The results of calculations show that the mechanically- and thermally-induced convection decays in about two seconds. The establishment of a planar diffusion flame after this period seems feasible in the central region of the container with sufficient quantities of reactants left over for subsequent studies. An analysis of the flame initiation and formation process suggests how the feasibility of creating such a flame can be further improved.

Screening Poststroke Fatigue; Feasibility and Validation of an Instrument for the Screening of Poststroke Fatigue throughout the Rehabilitation Process.

PubMed

Kruithof, Nena; Van Cleef, Melanie Hubertina Maria; Rasquin, Sascha Maria Cornelia; Bovend'Eerdt, Thamar Johannes Henricus

2016-01-01

Our objective is to investigate the feasibility and validity of a new instrument to screen for determinants of poststroke fatigue during the rehabilitation process. This prospective cohort study was conducted within the stroke department of a rehabilitation center. The participants in the study were postacute adult stroke patients. The Detection List Fatigue (DLF)was administered 2 weeks after the start of the rehabilitation program and again 6 weeks later. To determine the construct validity, the Hospital Anxiety and Depression Scale, the Checklist Individual Strength subscale fatigue, and the Fatigue Severity Scale--7-item version were administered. A fatigue rating scale was used to measure the patients' fatigue experience. Frequency analyses of the number of patients reporting poststroke fatigue determinants according to the DLF were performed. One hundred seven patients (mean age 60 years) without severe communication difficulties were included in the study. The DLF was easy to understand and quick to administer. The DLF showed good internal consistency (Cronbach's alpha: .79 and .87), high convergent validity (rs = .85 and rs = .79), and good divergent validity (rs = .31 and rs = .45). The majority of the patients (88.4%-90.2%) experienced at least 2 poststroke fatigue (PSF) determinants,of which "sleeping problem" was most frequently reported. The DLF is a feasible and valid instrument for the screening of PSF determinants throughout the rehabilitation process in stroke patients. Future studies should investigate whether the use of the list in determining a treatment plan prevents the development of PSF.

Feasibility of converting hi-speed processor for processing Kodak film types 7381/7271 (16mm) and 5381/5271 (35mm) using Kodak ECP chemistry

NASA Technical Reports Server (NTRS)

Weinstein, M. S.

1974-01-01

Testing conducted to determine the feasibility of converting the 16/35/70 hi-speed processor to process Kodak film types 7381/7271 (16mm) and 5381/5271 (35mm) color negative films using Kodak ECP chemistry is described.

Manual acupuncture plus usual care versus usual care alone in the treatment of endometriosis-related chronic pelvic pain: study protocol for a randomised controlled feasibility study.

PubMed

Armour, Mike; Smith, Caroline A; Schabrun, Siobhan; Steiner, Genevieve Z; Zhu, Xiaoshu; Lawson, Kenny; Song, Jing

2018-01-01

Endometriosis is the most common cause of chronic pelvic pain worldwide. Non-surgical treatments are effective for only 30-50% of women and have a significant side effect burden that leads to high discontinuation rates. Surgery can be effective but is expensive and invasive, and symptoms tend to recur within 5 years. There is early evidence that acupuncture may be effective in treating endometriosis-related chronic pelvic pain, showing clinically significant analgesia. Both levels of inflammation and pain processing have been shown to be altered in women with chronic pelvic pain. Acupuncture has been shown to reduce inflammation and change central pain processing in other conditions, but research on women with endometriosis is currently lacking. The aim of this feasibility study is to provide data on recruitment rates, retention, appropriateness of outcome measures, minimal clinically important difference in numeric rated scales for pain and the potential effect of acupuncture on pain processing and markers of inflammation in endometriosis-related CPP. We will include women aged 18-45 years with a diagnosis of endometriosis via laparoscopy in the past 5 years. A total of 30 participants will be recruited and randomly allocated in a 1:1 ratio to receive acupuncture or usual care. Women in the acupuncture group will receive two 45-min treatment sessions per week for 8 weeks (total of 16 sessions). Women in the usual care group will continue with their current treatment regimen. The primary feasibility outcomes are recruitment rates, retention rates and the safety and acceptability of the intervention; secondary patient-centred outcomes include a change in 0-10 daily pelvic pain ratings, the Endometriosis Health Profile 30 (EHP-30) and changes in conditioned pain modulation, resting and task-related EEG activity and inflammatory markers. Analyses will be performed blind to group allocation. This is a two-armed, assessor blind, randomised controlled feasibility trial. Data will be compared at baseline and trial completion 8 weeks later. Outcomes from this feasibility study will inform a larger, fully powered clinical trial should the treatment show trends for potential effectiveness. Australian New Zealand Clinical Trials Registry, ACTRN12617000053325 (http://www.ANZCTR.org.au/ACTRN12617000053325.aspx).

Study of glass preforms for glass fiber optics applications (study of space processing of ceramic materials). [light transmission

NASA Technical Reports Server (NTRS)

Wang, F. F. Y.

1974-01-01

The feasibility, and technical and economic desirability was studied of space processing of glass preforms for optical fiber transmission applications. The results indicate that space processing can produce glass preforms of equal quality at lower cost than earth bound production, and can produce diameter modulation in the glass preform which promotes mode coupling and lowers the dispersion. The glass composition can be modified through the evaporative and diffusion processes, and graded refractive index profiles can be produced. A brief summary of the state of the art in optical fiber transmission is included.

Evaluation of a novel vital sign device to reduce maternal mortality and morbidity in low-resource settings: a mixed method feasibility study for the CRADLE-3 trial.

PubMed

Vousden, Nicola; Lawley, Elodie; Nathan, Hannah L; Seed, Paul T; Brown, Adrian; Muchengwa, Tafadzwa; Charantimath, Umesh; Bellad, Mrutyunjaya; Gidiri, Muchabayiwa Francis; Goudar, Shivaprasad; Chappell, Lucy C; Sandall, Jane; Shennan, Andrew H

2018-04-27

The CRADLE-3 trial is a stepped-wedge randomised controlled trial aiming to reduce maternal mortality and morbidity by implementing a novel vital sign device (CRADLE Vital Sign Alert) and training package into routine maternity care in 10 low-income sites. The MRC Guidance on complex interventions proposes that interventions and implementation strategies be shaped by early phase piloting and development work. We present the findings of a three-month mixed-methodology feasibility study for this trial, describe how this was informed by the MRC guidance and the study design was refined. The fidelity, dose, feasibility and acceptability of implementation and training materials were assessed in three representative non-trial sites (Zimbabwe, Ethiopia, India) using multiple-choice questionnaires, evaluation of clinical management (action log), healthcare provider (HCP) semi-structured interviews and focus groups 4-10 weeks after implementation. Simultaneously, the 10 sites included in the main trial (eight countries) collected primary outcome data to inform the power calculation and randomisation allocation and assess the feasibility of data collection. The package was implemented with high fidelity (85% of HCP trained, n = 204). The questionnaires indicated a good understanding of device use with 75% of participants scoring > 75% (n = 97; 90% of those distributed). Action logs were inconsistently completed but indicated that the majority of HCP responded appropriately to abnormal results. From 18 HCP interviews and two focus groups it was widely reported that the intervention improved capacity to make clinical decisions, escalate care and make appropriate referrals. Nine of the ten main trial sites achieved ethical approval for pilot data collection. Intensive care was an inconsistent marker of morbidity and stroke an infrequent outcome and therefore they were removed from the main trial composite outcome. Tools and methods of data collection were optimized and event rates used to inform randomisation. This feasibility study demonstrates that the components of the intervention were acceptable, methods of implementing were successful and the main trial design would be feasible. Qualitative work identified key moderators that informed the main trial process evaluation. Changes to the training package, implementation strategy, study design and processes were identified to refine the implementation in the main trial. ISRCTN41244132 ; Registered 24/11/2015.

US-Canada Great Lakes Regional Specimen Bank Feasibility Study.

PubMed

Kerry, A; Edmonds, C J; Landon, L; Yonker, T L

1993-11-01

A study to examine the feasibility of establishing a Regional Specimen Bank in the Great Lakes area of the United States and Canada has recently been initiated by the Michigan Audubon Society. There are several existing formal and informal specimen banking facilities active in the region but their combined adequacy has not been evaluated. This feasibility study will establish the need and use of a regional bank and the institution(s) necessary to satisfy this need will be recommended. The study will address the scope required to meet present and future needs including the types of specimens to be represented in the bank, geographic coverage and protocols for collection, shipping, processing, analysis and storage. A management policy of the bank will be developed encompassing business operation, costs, governing structure and personnel requirements. The legal requirements of the bank will be determined with regards to the acquisition of samples, transport across national boundaries, access to specimens and information, and liability during operation. An effective information dissemination network will be recommended that is compatible with national and international partners, will facilitate technology and information transfer and support the quality and status of the bank. Determination of secure, long-term funding sources will be one of the key elements to ensuring a safe repository. This feasibility study is funded by the Great Lakes Protection Fund.

Frederick County road orders 1743-1772.

DOT National Transportation Integrated Search

2005-01-01

The road history projects undertaken by the Virginia Transportation Research Council establish the feasibility of studies of early road networks and their use in the environmental review process. These projects, by gathering and publishing the early ...

Fincastle County road orders 1773-1776.

DOT National Transportation Integrated Search

2007-01-01

The road history projects undertaken by the Virginia Transportation Research Council establish the feasibility of studies of early road networks and their use in the environmental review process. These projects, by gathering and publishing the early ...

Montgomery County road orders 1777-1806.

DOT National Transportation Integrated Search

2008-01-01

The road history projects undertaken by the Virginia Transportation Research Council establish the feasibility of studies of early road networks and their use in the environmental review process. These projects, by gathering and publishing the early ...

Amelia County road orders, 1735-1753.

DOT National Transportation Integrated Search

2002-01-01

The road history projects undertaken by the Virginia Transportation Research Council establish the feasibility of studies of early road networks and their use in the environmental review process. These projects, by gathering and publishing the early ...

Botetourt County road orders 1770-1778.

DOT National Transportation Integrated Search

2007-01-01

The road history projects undertaken by the Virginia Transportation Research Council establish the feasibility of studies of early road networks and their use in the environmental review process. These projects, by gathering and publishing the early ...

Fairfax County road orders, 1749-1800.

DOT National Transportation Integrated Search

2003-01-01

The road history projects undertaken by the Virginia Transportation Research Council establish the feasibility of studies of early road networks and their use in the environmental review process. These projects, by gathering and publishing the early ...

ECONOMIC FEASIBILITY OF RADIATION-PASTEURIZING FRESH STRAWBERRIES, PEACHES, TOMATOES, GRAPES, ORANGES, AND GRAPEFRUIT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Droge, J.H.

1963-08-01

Results are reported from a survey of the produce industry on the feasibility of using radiation processing to extend the storage life of fresh strawberries, peaches, tomatoes, grapes, oranges, and grapefruit. A majority of the respondents thought that radiation processing would increase the production and market volume of the selected fruits and vegetables surveyed but would not change output and sales volume of camned, frozen, and other processed forms. Cost estimates of radiation processing are discussed. (C.H.)

Texas Solar Collaboration Action Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Winland, Chris

2013-02-14

Texas Solar Collaboration Permitting and Interconenction Process Improvement Action Plan. San Antonio-specific; Investigate feasibility of using electronic signatures; Investigate feasibility of enabling other online permitting processes (e.g., commercial); Assess need for future document management and workflow/notification IT improvements; Update Information Bulletin 153 regarding City requirements and processes for PV; Educate contractors and public on CPS Energy’s new 2013 solar program processes; Continue to discuss “downtown grid” interconnection issues and identify potential solutions; Consider renaming Distributed Energy Resources (DER); and Continue to participate in collaborative actions.

A study of palm biomass processing strategy in Sarawak

NASA Astrophysics Data System (ADS)

Lee, S. J. Y.; Ng, W. P. Q.; Law, K. H.

2017-06-01

In the past decades, palm industry is booming due to its profitable nature. An environmental concern regarding on the palm industry is the enormous amount of waste produced from palm industry. The waste produced or palm biomass is one significant renewable energy source and raw material for value-added products like fiber mats, activated carbon, dried fiber, bio-fertilizer and et cetera in Malaysia. There is a need to establish the palm biomass industry for the recovery of palm biomass for efficient utilization and waste reduction. The development of the industry is strongly depending on the two reasons, the availability and supply consistency of palm biomass as well as the availability of palm biomass processing facilities. In Malaysia, the development of palm biomass industry is lagging due to the lack of mature commercial technology and difficult logistic planning as a result of scattered locality of palm oil mill, where palm biomass is generated. Two main studies have been carried out in this research work: i) industrial study of the feasibility of decentralized and centralized palm biomass processing in Sarawak and ii) development of a systematic and optimized palm biomass processing planning for the development of palm biomass industry in Sarawak, Malaysia. Mathematical optimization technique is used in this work to model the above case scenario for biomass processing to achieve maximum economic potential and resource feasibility. An industrial study of palm biomass processing strategy in Sarawak has been carried out to evaluate the optimality of centralized processing and decentralize processing of the local biomass industry. An optimal biomass processing strategy is achieved.

Simulating Data for Clinical Research: A Tutorial

ERIC Educational Resources Information Center

Beaujean, A. Alexander

2018-01-01

Simulation studies use computer-generated data to examine questions of interest that have traditionally been used to study properties of statistics and estimating algorithms. With the recent advent of powerful processing capabilities in affordable computers along with readily usable software, it is now feasible to use a simulation study to aid in…

Feasibility of clinical detection of cervical dysplasia using angle-resolved low coherence interferometry measurements of depth-resolved nuclear morphology.

PubMed

Ho, Derek; Drake, Tyler K; Smith-McCune, Karen K; Darragh, Teresa M; Hwang, Loris Y; Wax, Adam

2017-03-15

This study sought to establish the feasibility of using in situ depth-resolved nuclear morphology measurements for detection of cervical dysplasia. Forty enrolled patients received routine cervical colposcopy with angle-resolved low coherence interferometry (a/LCI) measurements of nuclear morphology. a/LCI scans from 63 tissue sites were compared to histopathological analysis of co-registered biopsy specimens which were classified as benign, low-grade squamous intraepithelial lesion (LSIL), or high-grade squamous intraepithelial lesion (HSIL). Results were dichotomized as dysplastic (LSIL/HSIL) versus non-dysplastic and HSIL versus LSIL/benign to determine both accuracy and potential clinical utility of a/LCI nuclear morphology measurements. Analysis of a/LCI data was conducted using both traditional Mie theory based processing and a new hybrid algorithm that provides improved processing speed to ascertain the feasibility of real-time measurements. Analysis of depth-resolved nuclear morphology data revealed a/LCI was able to detect a significant increase in the nuclear diameter at the depth bin containing the basal layer of the epithelium for dysplastic versus non-dysplastic and HSIL versus LSIL/Benign biopsy sites (both p < 0.001). Both processing techniques resulted in high sensitivity and specificity (>0.80) in identifying dysplastic biopsies and HSIL. The hybrid algorithm demonstrated a threefold decrease in processing time at a slight cost in classification accuracy. The results demonstrate the feasibility of using a/LCI as an adjunctive clinical tool for detecting cervical dysplasia and guiding the identification of optimal biopsy sites. The faster speed from the hybrid algorithm offers a promising approach for real-time clinical analysis. © 2016 UICC.

Feasibility of clinical detection of cervical dysplasia using angle-resolved low coherence interferometry measurements of depth-resolved nuclear morphology

PubMed Central

Ho, Derek; Drake, Tyler K.; Smith-McCune, Karen K.; Darragh, Teresa M.; Hwang, Loris Y.; Wax, Adam

2017-01-01

This study sought to establish the feasibility of using in situ depth-resolved nuclear morphology measurements for detection of cervical dysplasia. Forty (40) enrolled patients received routine cervical colposcopy with angle-resolved low coherence interferometry (a/LCI) measurements of nuclear morphology. a/LCI scans from 63 tissue sites were compared to histopathological analysis of co-registered biopsy specimens which were classified as benign, low-grade squamous intraepithelial lesion (LSIL), or high-grade squamous intraepithelial lesion (HSIL). Results were dichotomized as dysplastic (LSIL/HSIL) versus non-dysplastic and HSIL versus LSIL/benign to determine both accuracy and potential clinical utility of a/LCI nuclear morphology measurements. Analysis of a/LCI data was conducted using both traditional Mie theory based processing and a new hybrid algorithm that provides improved processing speed to ascertain the feasibility of real-time measurements. Analysis of depth-resolved nuclear morphology data revealed a/LCI was able to detect a significant increase in the nuclear diameter at the depth bin containing the basal layer of the epithelium for dysplastic versus non-dysplastic and HSIL versus LSIL/Benign biopsy sites (both p < 0.001). Both processing techniques resulted in high sensitivity and specificity (> 0.80) in identifying dysplastic biopsies and HSIL. The hybrid algorithm demonstrated a threefold decrease in processing time at a slight cost in classification accuracy. The results demonstrate the feasibility of using a/LCI as an adjunctive clinical tool for detecting cervical dysplasia and guiding the identification of optimal biopsy sites. The faster speed from the hybrid algorithm offers a promising approach for real-time clinical analysis. PMID:27883177

Development and implementation of the Baltimore healthy carry-outs feasibility trial: process evaluation results

PubMed Central

2013-01-01

Background Prepared food sources, including fast food restaurants and carry-outs, are common in low-income urban areas. These establishments provide foods high in calories, sugar, fat, and sodium. The aims of the study were to (1) describe the development and implementation of a carry-out intervention to provide and promote healthy food choices in prepared food sources, and (2) to assess its feasibility through a process evaluation. Methods To promote healthy eating in this setting, a culturally appropriate intervention was developed based on formative research from direct observation, interviews and focus groups. We implemented a 7-month feasibility trial in 8 carry-outs (4 intervention and 4 comparison) in low-income neighborhoods in Baltimore, MD. The trial included three phases: 1) Improving menu boards and labeling to promote healthier items; 2) Promoting healthy sides and beverages and introducing new items; and 3) Introducing affordable healthier combo meals and improving food preparation methods. A process evaluation was conducted to assess intervention reach, dose received, and fidelity using sales receipts, carry-out visit observations, and an intervention exposure assessment. Results On average, Baltimore Healthy Carry-outs (BHC) increased customer reach at intervention carry-outs; purchases increased by 36.8% at the end of the study compared to baseline. Additionally, menu boards and labels were seen by 100.0% and 84.2% of individuals (n = 101), respectively, at study completion compared to baseline. Customers reported purchasing specific foods due to the presence of a photo on the menu board (65.3%) or menu labeling (42.6%), suggesting moderate to high dose received. Promoted entrée availability and revised menu and poster presence all demonstrated high fidelity and feasibility. Conclusions The results suggest that BHC is a culturally acceptable intervention. The program was also immediately adopted by the Baltimore City Food Policy Initiative as a city-wide intervention in its public markets. PMID:23837722

Development and implementation of the Baltimore healthy carry-outs feasibility trial: process evaluation results.

PubMed

Lee-Kwan, Seung Hee; Goedkoop, Sonja; Yong, Rachel; Batorsky, Benjamin; Hoffman, Vanessa; Jeffries, Jayne; Hamouda, Mohamed; Gittelsohn, Joel

2013-07-09

Prepared food sources, including fast food restaurants and carry-outs, are common in low-income urban areas. These establishments provide foods high in calories, sugar, fat, and sodium. The aims of the study were to (1) describe the development and implementation of a carry-out intervention to provide and promote healthy food choices in prepared food sources, and (2) to assess its feasibility through a process evaluation. To promote healthy eating in this setting, a culturally appropriate intervention was developed based on formative research from direct observation, interviews and focus groups. We implemented a 7-month feasibility trial in 8 carry-outs (4 intervention and 4 comparison) in low-income neighborhoods in Baltimore, MD. The trial included three phases: 1) Improving menu boards and labeling to promote healthier items; 2) Promoting healthy sides and beverages and introducing new items; and 3) Introducing affordable healthier combo meals and improving food preparation methods. A process evaluation was conducted to assess intervention reach, dose received, and fidelity using sales receipts, carry-out visit observations, and an intervention exposure assessment. On average, Baltimore Healthy Carry-outs (BHC) increased customer reach at intervention carry-outs; purchases increased by 36.8% at the end of the study compared to baseline. Additionally, menu boards and labels were seen by 100.0% and 84.2% of individuals (n = 101), respectively, at study completion compared to baseline. Customers reported purchasing specific foods due to the presence of a photo on the menu board (65.3%) or menu labeling (42.6%), suggesting moderate to high dose received. Promoted entrée availability and revised menu and poster presence all demonstrated high fidelity and feasibility. The results suggest that BHC is a culturally acceptable intervention. The program was also immediately adopted by the Baltimore City Food Policy Initiative as a city-wide intervention in its public markets.

Acceptability and Feasibility of Cash Transfers for HIV Prevention among Adolescent South African Women

PubMed Central

MacPhail, Catherine; Adato, Michelle; Kahn, Kathleen; Selin, Amanda; Twine, Rhian; Khoza, Samson; Rosenberg, Molly; Nguyen, Nadia; Becker, Elizabeth; Pettifor, Audrey

2013-01-01

Women are at increased risk of HIV infection in much of sub-Saharan Africa. Longitudinal and cross-sectional studies have found an association between school attendance and reduced HIV risk. We report feasibility and acceptability results from a pilot of a cash transfer intervention conditional on school attendance paid to young women and their families in rural Mpumalanga, South Africa for the prevention of HIV infection. Twenty-nine young women were randomised to intervention or control and a cash payment based on school attendance made over a 2 month period. Quantitative (survey) and qualitative (focus group and interview) data collection was undertaken with young women, parents, teachers and young men in the same school. Qualitative analysis was conducted in Atlas.ti using a framework approach and basic descriptive analysis in Excel was conducted on the quantitative data. Results indicate it was both feasible and acceptable to introduce such an intervention among this population in rural South Africa. There was good understanding of the process of randomisation and the aims of the study, although some rumours developed in the study community. We address some of the changes necessary to ensure acceptability and feasibility of the main trial. PMID:23435698

Creation of the First French Database in Primary Care Using the ICPC2: Feasibility Study.

PubMed

Lacroix-Hugues, V; Darmon, D; Pradier, C; Staccini, P

2017-01-01

The objective of our study was to assess the feasibility of gathering data stored in primary care Electronic Health records (EHRs) in order to create a research database (PRIMEGE PACA project). The software for EHR models of two office and patient data management systems were analyzed; anonymized data was extracted and imported into a MySQL database. An ETL procedure to code text in ICPC2 codes was implemented. Eleven general practitioners (GPs) were enrolled as "data producers" and data were extracted from 2012 to 2015. In this paper, we explain the ways to make this process feasible as well as illustrate its utility for estimating epidemiological indicators and professional practice assessments. Other software is currently being analyzed for integration and expansion of this panel of GPs. This experimentation is recognized as a robust framework and is considered to be the technical foundation of the first regional observatory of primary care data.

Preliminary Dynamic Feasibility and Analysis of a Spherical, Wind-Driven (Tumbleweed), Martian Rover

NASA Technical Reports Server (NTRS)

Flick, John J.; Toniolo, Matthew D.

2005-01-01

The process and findings are presented from a preliminary feasibility study examining the dynamics characteristics of a spherical wind-driven (or Tumbleweed) rover, which is intended for exploration of the Martian surface. The results of an initial feasibility study involving several worst-case mobility situations that a Tumbleweed rover might encounter on the surface of Mars are discussed. Additional topics include the evaluation of several commercially available analysis software packages that were examined as possible platforms for the development of a Monte Carlo Tumbleweed mission simulation tool. This evaluation lead to the development of the Mars Tumbleweed Monte Carlo Simulator (or Tumbleweed Simulator) using the Vortex physics software package from CM-Labs, Inc. Discussions regarding the development and evaluation of the Tumbleweed Simulator, as well as the results of a preliminary analysis using the tool are also presented. Finally, a brief conclusions section is presented.

Comparison of stool collection on site versus at home in a population-based study : feasibility and participants' preference in Pretest 2 of the German National Cohort.

PubMed

Schultze, A; Akmatov, M K; Andrzejak, M; Karras, N; Kemmling, Y; Maulhardt, A; Wieghold, S; Ahrens, W; Günther, K; Schlenz, H; Krause, G; Pessler, F

2014-11-01

For certain laboratory investigations it is necessary to obtain native stool samples and process them within a narrow time window at the point of contact or a nearby laboratory. However, it is not known whether it is feasible to obtain stool samples from asymptomatic individuals during an appointment in a study center (SC). We therefore compared participants' preference, feasibility and acceptance of stool sample collection during the appointment at the study center (on-site sampling) to collection at home after the appointment. The study was conducted at two sites in Northern Germany (Bremen, n = 156; Hannover, n = 147) during the Pretest 2 phase of the German National Cohort (GNC), drawing upon a randomly selected population supplemented by a small convenience sample. In the study center, the participants were given the choice to provide a stool sample during the appointment or to collect a sample later at home and return it by mail. In all, 303 of the 351 participants (86 %) of Pretest 2 at these sites participated in this feasibility study. Only 7.9 % (24/303) of the participants chose on-site collection, whereas 92 % (279/303) chose at-home collection. There were significant differences between the two study sites in that 14 % (21/147) of participants in Hannover and 2 % (3/156) of participants in Bremen chose on-site collection. Compliance was high in both groups, as 100 % (24/24) and 98 % (272/279) of participants in the on-site and at-home groups, respectively, provided complete samples. Both methods were highly accepted, as 92 % of the participants in each group (22/24 and 227/248) stated that stool collection at the respective site was acceptable. When given a choice, most participants in this population-based study preferred home collection of stool samples to collection in the study center. Thus, native stool samples for immediate processing in the study center may potentially be obtained only from a subpopulation of participants, which may lead to selection bias. Home collection, on the other hand, proved to be a highly feasible method for studies that do not require freshly collected native stool.

High pressure processing with hot sauce flavoring enhances sensory quality for raw oysters (Crassostrea virginica)

USDA-ARS?s Scientific Manuscript database

This study evaluated the feasibility of flavoring raw oysters by placing them under pressure in the presence of selected flavorings. Hand-shucked raw oysters were processed at high pressure (600 MPa), in the presence or absence of (Sriracha®) flavoring, and evaluated by a trained sensory panel 3 an...

Reducing lumber thickness variation using real-time statistical process control

Treesearch

Thomas M. Young; Brian H. Bond; Jan Wiedenbeck

2002-01-01

A technology feasibility study for reducing lumber thickness variation was conducted from April 2001 until March 2002 at two sawmills located in the southern U.S. A real-time statistical process control (SPC) system was developed that featured Wonderware human machine interface technology (HMI) with distributed real-time control charts for all sawing centers and...

Feasibility study of algae-based Carbon Dioxide capture ...

EPA Pesticide Factsheets

SUMMARY: The biomass of microalgae contains approximately 50% carbon, which is commonly obtained from the atmosphere, but can also be taken from commercial sources that produce CO2, such as coal-fired power plants. A study of operational demonstration projects is being undertaken to evaluate the benefits of using algae to reduce CO2 emissions from industrial and small-scale utility power boilers. The operations are being studied for the use of CO2 from flue gas for algae growth along with the production of biofuels and other useful products to prepare a comprehensive characterization of the economic feasibility of using algae to capture CO2. Information is being generated for analyses of the potential for these technologies to advance in the market and assist in meeting environmental goals, as well as to examine their associated environmental implications. Three electric power generation plants (coal and fuel oil fired) equipped to send flue-gas emissions to algae culture at demonstration facilities are being studied. Data and process information are being collected and developed to facilitate feasibility and modeling evaluations of the CO2 to algae technology. An understanding of process requirements to apply this technology to existing industries would go far in advancing carbon capture opportunities. Documenting the successful use of this technology could help bring “low-tech”, low-cost, CO2 to algae, carbon capture to multiple size industries and

Development of a golf-specific load monitoring tool: Content validity and feasibility.

PubMed

Williams, Scott B; Gastin, Paul B; Saw, Anna E; Robertson, Sam

2018-05-01

Athletes often record details of their training and competitions, supported by information such as environmental conditions, travel, as well as how they felt. However, it is not known how prevalent these practices are in golfers, or how valuable this process is perceived. The purpose of this study was to develop a golf-specific load monitoring tool (GLMT), and establish the content validity and feasibility of this tool amongst high-level golfers. In the first phase of development, 21 experts were surveyed to determine the suitability of items for inclusion in the GLMT. Of the 36 items, 21 received >78% agreement, a requirement to establish content validity and for inclusion in the GLMT. Total duration was the preferred metric for golf-specific activities, whilst rating of perceived exertion (RPE) was preferred for measuring physical training. In the second phase, feasibility of the tool was assessed by surveying 13 high-level male golfers following 28-days of daily GLMT use. All items included in the GLMT were deemed feasible to record, with all players participating in the feasibility study providing high to very high ratings. Golfers responded that they would consider using a load monitoring tool of this nature long term, provided it can be completed in less than five minutes per day.

Environmental influences on small eating behavior change to promote weight loss among Black and Hispanic populations.

PubMed

Eldridge, Johanna D; Devine, Carol M; Wethington, Elaine; Aceves, Luz; Phillips-Caesar, Erica; Wansink, Brian; Charlson, Mary E

2016-01-01

Small eating behavior changes are proposed as more feasible to achieve and maintain than larger changes used in traditional behavioral weight loss studies. However, it is unclear whether overweight Black and Hispanic adults in a low-income urban setting experience small changes as feasible and what might influence feasibility. Participants' experiences in a 12-week pilot weight loss intervention were explored qualitatively to determine the feasibility of making small eating behavior changes in this population. After the intervention (69% retention), semi-structured interviews with 46 men and women (mean age 51, 50% Non-Hispanic Black, 43% Hispanic) revealed that making small eating changes was a process shaped by participants' intrapersonal and interpersonal eating environments. Participants responded to intrapersonal and interpersonal eating environmental challenges by adapting small change strategies, navigating eating environments, and negotiating household eating practices. Findings highlight how even small eating behavior changes called for adaptation, navigation, and negotiation of complex eating environments in daily life. These findings were used to improve the trial that followed and underline the importance of feasibility studies to inform community trials. Findings also add to understanding of contextual challenges and the skills needed to implement small changes in a low income, ethnic minority population. Copyright © 2015. Published by Elsevier Ltd.

Environmental influences on small eating behavior change to promote weight loss among Black and Hispanic populations

PubMed Central

Eldridge, Johanna D.; Devine, Carol M.; Wethington, Elaine; Aceves, Luz; Phillips-Caesar, Erica; Wansink, Brian; Charlson, Mary E.

2015-01-01

Small eating behavior changes are proposed as more feasible to achieve and maintain than larger changes used in traditional behavioral weight loss studies. However, it is unclear whether overweight Black and Hispanic adults in a low-income urban setting experience small changes as feasible and what might influence feasibility. Participants' experiences in a 12-week pilot weight loss intervention were explored qualitatively to determine the feasibility of making small eating behavior changes in this population. After the intervention (69% retention), semi-structured interviews with 46 men and women (mean age 51, 50% Non-Hispanic Black, 43% Hispanic) revealed that making small eating changes was a process shaped by participants' intrapersonal and interpersonal eating environments. Participants responded to intrapersonal and interpersonal eating environmental challenges by adapting small change strategies, navigating eating environments, and negotiating household eating practices. Findings highlight how even small eating behavior changes called for adaptation, navigation, and negotiation of complex eating environments in daily life. These findings were used to improve the trial that followed and underline the importance of feasibility studies to inform community trials. Findings also add to understanding of contextual challenges and the skills needed to implement small changes in a low income, ethnic minority population. PMID:26368577

National audit of continence care: laying the foundation.

PubMed

Mian, Sarah; Wagg, Adrian; Irwin, Penny; Lowe, Derek; Potter, Jonathan; Pearson, Michael

2005-12-01

National audit provides a basis for establishing performance against national standards, benchmarking against other service providers and improving standards of care. For effective audit, clinical indicators are required that are valid, feasible to apply and reliable. This study describes the methods used to develop clinical indicators of continence care in preparation for a national audit. To describe the methods used to develop and test clinical indicators of continence care with regard to validity, feasibility and reliability. A multidisciplinary working group developed clinical indicators that measured the structure, process and outcome of care as well as case-mix variables. Literature searching, consensus workshops and a Delphi process were used to develop the indicators. The indicators were tested in 15 secondary care sites, 15 primary care sites and 15 long-term care settings. The process of development produced indicators that received a high degree of consensus within the Delphi process. Testing of the indicators demonstrated an internal reliability of 0.7 and an external reliability of 0.6. Data collection required significant investment in terms of staff time and training. The method used produced indicators that achieved a high degree of acceptance from health care professionals. The reliability of data collection was high for this audit and was similar to the level seen in other successful national audits. Data collection for the indicators was feasible to collect, however, issues of time and staffing were identified as limitations to such data collection. The study has described a systematic method for developing clinical indicators for national audit. The indicators proved robust and reliable in primary and secondary care as well as long-term care settings.

Processing of solid fossil-fuel deposits by electrical induction heating

NASA Astrophysics Data System (ADS)

Fisher, S. T.

1980-02-01

A study has been made to determine the feasibility of extracting the energy commodities electricity, gas, petroleum, chemical feedstocks, and coke from the solid fossil fuels coal, oil shale, oil sand, and heavy oil by the electrical induction heating of the deposits. Available electrical, physical, and chemical data indicate that this process may be technically and economically feasible. Some basic data are missing, and it has been necessary to indicate possible ranges of values for some parameters. The tentative conclusions drawn are the following. All four solid fossil fuels can be processed successfully underground. All five energy commodities can be produced economically in adequate quantities for a period of a century or more in North America, without recourse to any other major energy source. The development and construction time required is short enough to permit an uninterrupted supply of all energy commodities as present sources decline

Feasibility of bioengineered two-stages sequential batch reactor and filtration-adsorption process for complex agrochemical effluent.

PubMed

Manekar, Pravin; Biswas, Rima; Urewar, Chaitali; Pal, Sukdeb; Nandy, Tapas

2013-11-01

In the present study, the feasibility of a bioengineered two-stages sequential batch reactor (BTSSBR) followed by filtration-adsorption process was investigated to treat the agrochemical effluent by overcoming factor affecting process stability such as microbial imbalance and substrate sensitivity. An air stripper stripped 90% of toxic ammonia, and combined with other streams for bio-oxidation and filtration-adsorption. The BTSSBR system achieved bio-oxidation at 6 days hydraulic retention time by fending off microbial imbalance and substrate sensitivity. The maximum reduction in COD and BOD by heterotrophic bacteria in the first reactor was 87% and 90%, respectively. Removal of toxic ammoniacal-nitrogen by autotrophic bacteria in a post-second stage bio-oxidation was 97%. The optimum filtration and adsorption of pollutants were achieved at a filtration rate of 10 and 9 m(3)m(-2)h(-1), respectively. The treatment scheme comprising air stripper, BTSSBR and filtration-adsorption process showed a great promise for treating the agrochemical effluent. Copyright © 2013 Elsevier Ltd. All rights reserved.

Silicon ribbon study program. [dendritic crystals for use in solar cells

NASA Technical Reports Server (NTRS)

Seidensticker, R. G.; Duncan, C. S.

1975-01-01

The feasibility is studied of growing wide, thin silicon dendritic web for solar cell fabrication and conceptual designs are developed for the apparatus required. An analysis of the mechanisms of dendritic web growth indicated that there were no apparent fundamental limitations to the process. The analysis yielded quantitative guidelines for the thermal conditions required for this mode of crystal growth. Crucible designs were then investigated: the usual quartz crucible configurations and configurations in which silicon itself is used for the crucible. The quartz crucible design is feasible and is incorporated into a conceptual design for a laboratory scale crystal growth facility capable of semi-automated quasi-continuous operation.

Market survey on products from the Tema Oil Refinery carried out as part of the feasibility study on the Tema Oil Refinery expansion project. Export trade information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-10-01

The Tema Oil Refinery (TOR), which was commissioned in 1963, is a simple hydroskimming plant which processes crude oil into LPG, gasoline, kerosene, gasoil, and fuel oil. It is the only petroleum refinery in Ghana. Over the years some of the equipment in the refinery has deteriorated or become obsolete necessitating major rehabilitation. A feasibility study is investigating the modernization and expansion of the refinery to meet projected market demands until the year 2005. The report presents the results of a market survey done on products from TOR.

Social network supported process recommender system.

PubMed

Ye, Yanming; Yin, Jianwei; Xu, Yueshen

2014-01-01

Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced.

Feasibility Study of Seawater Electrolysis for Photovoltaic/Fuel Cell Hybrid Power System for the Coastal Areas in Thailand

NASA Astrophysics Data System (ADS)

Srisiriwat, A.; Pirom, W.

2017-10-01

Solar photovoltaic cell and fuel cell are the practicable options to realize as a possible hybrid power system because the power of the sun cannot be utilized at night or cloudy days but hydrogen has been found as an ideal energy carrier for being transportable, storable, and converting energy though fuel cell. Hydrogen storage is chosen for its ability to obtain a clean energy option. Electrolysis, which is the simplest process to produce hydrogen, can be powered by the dc voltage from the photovoltaic cell instead of using the battery as power supply. This paper concentrates on a feasibility study of seawater electrolysis using photovoltaic power integrated fuel cell system for the coastal cities in Thailand. The proposed system composed of photovoltaic arrays, seawater electrolyzer and fuel cell is presented when the 10-kW of fuel cell electrical power is considered. The feasibility study of hydrogen production and energy analysis of this proposed system is also evaluated.

Advanced Space Suit Insulation Feasibility Study

NASA Technical Reports Server (NTRS)

Trevino, Luis A.; Orndoff, Evelyne S.

2000-01-01

For planetary applications, the space suit insulation has unique requirements because it must perform in a dynamic mode to protect humans in the harsh dust, pressure and temperature environments. Since the presence of a gaseous planetary atmosphere adds significant thermal conductance to the suit insulation, the current multi-layer flexible insulation designed for vacuum applications is not suitable in reduced pressure planetary environments such as that of Mars. Therefore a feasibility study has been conducted at NASA to identify the most promising insulation concepts that can be developed to provide an acceptable suit insulation. Insulation concepts surveyed include foams, microspheres, microfibers, and vacuum jackets. The feasibility study includes a literature survey of potential concepts, an evaluation of test results for initial insulation concepts, and a development philosophy to be pursued as a result of the initial testing and conceptual surveys. The recommended focus is on microfibers due to the versatility of fiber structure configurations, the wide choice of fiber materials available, the maturity of the fiber processing industry, and past experience with fibers in insulation applications

Cost-benefit analysis of water-reuse projects for environmental purposes: a case study for Spanish wastewater treatment plants.

PubMed

Molinos-Senante, M; Hernández-Sancho, F; Sala-Garrido, R

2011-12-01

Water reuse is an emerging and promising non-conventional water resource. Feasibility studies are essential tools in the decision making process for the implementation of water-reuse projects. However, the methods used to assess economic feasibility tend to focus on internal costs, while external impacts are relegated to unsubstantiated statements about the advantages of water reuse. Using the concept of shadow prices for undesirable outputs of water reclamation, the current study developed a theoretical methodology to assess internal and external economic impacts. The proposed methodological approach is applied to 13 wastewater treatment plants in the Valencia region of Spain that reuse effluent for environmental purposes. Internal benefit analyses indicated that only a proportion of projects were economically viable, while when external benefits are incorporated all projects were economically viable. In conclusion, the economic feasibility assessments of water-reuse projects should quantitatively evaluate economic, environmental and resource availability. Copyright © 2011 Elsevier Ltd. All rights reserved.

Process evaluation to explore internal and external validity of the "Act in Case of Depression" care program in nursing homes.

PubMed

Leontjevas, Ruslan; Gerritsen, Debby L; Koopmans, Raymond T C M; Smalbrugge, Martin; Vernooij-Dassen, Myrra J F J

2012-06-01

A multidisciplinary, evidence-based care program to improve the management of depression in nursing home residents was implemented and tested using a stepped-wedge design in 23 nursing homes (NHs): "Act in case of Depression" (AiD). Before effect analyses, to evaluate AiD process data on sampling quality (recruitment and randomization, reach) and intervention quality (relevance and feasibility, extent to which AiD was performed), which can be used for understanding internal and external validity. In this article, a model is presented that divides process evaluation data into first- and second-order process data. Qualitative and quantitative data based on personal files of residents, interviews of nursing home professionals, and a research database were analyzed according to the following process evaluation components: sampling quality and intervention quality. Nursing home. The pattern of residents' informed consent rates differed for dementia special care units and somatic units during the study. The nursing home staff was satisfied with the AiD program and reported that the program was feasible and relevant. With the exception of the first screening step (nursing staff members using a short observer-based depression scale), AiD components were not performed fully by NH staff as prescribed in the AiD protocol. Although NH staff found the program relevant and feasible and was satisfied with the program content, individual AiD components may have different feasibility. The results on sampling quality implied that statistical analyses of AiD effectiveness should account for the type of unit, whereas the findings on intervention quality implied that, next to the type of unit, analyses should account for the extent to which individual AiD program components were performed. In general, our first-order process data evaluation confirmed internal and external validity of the AiD trial, and this evaluation enabled further statistical fine tuning. The importance of evaluating the first-order process data before executing statistical effect analyses is thus underlined. Copyright © 2012 American Medical Directors Association, Inc. Published by Elsevier Inc. All rights reserved.

Feasibility study for the quantitative assessment of mineral resources in asteroids

USGS Publications Warehouse

Keszthelyi, Laszlo; Hagerty, Justin; Bowers, Amanda; Ellefsen, Karl; Ridley, Ian; King, Trude; Trilling, David; Moskovitz, Nicholas; Grundy, Will

2017-04-21

This study was undertaken to determine if the U.S. Geological Survey’s process for conducting mineral resource assessments on Earth can be applied to asteroids. Successful completion of the assessment, using water and iron resources to test the workflow, has resulted in identification of the minimal adjustments required to conduct full resource assessments beyond Earth. We also identify the types of future studies that would greatly reduce uncertainties in an actual future assessment. Whereas this is a feasibility study and does not include a complete and robust analysis of uncertainty, it is clear that the water and metal resources in near-Earth asteroids are sufficient to support humanity should it become a fully space-faring species.

Real-time radiography at the NECTAR facility

NASA Astrophysics Data System (ADS)

Bücherl, T.; Lierse von Gostomski, Ch.

2011-09-01

A feasibility study has shown that real-time radiography using fission neutrons is possible at the NECTAR facility, when using an improved detection system for fast variations (Bücherl et al., 2009 [1]). Continuing this study, real-time measurements of slowly varying processes like the water uptake in medium sized trunks (diameter about 12 cm) and of slow periodic processes (e.g. a slowly rotating iron disk) are investigated successfully using the existing detection system.

STORMWATER FILTRATION USING MULCH AND JUTE

EPA Science Inventory

This study evaluated the feasibility of using readily available, low-cost natural filter naterials for stormwater (SW) treatment. Generic (hardwood) mulch and processed jute fiber were evaluated for the removal of metallic and organic pollutants from urban SW runoff samples colle...

Study of the photovoltaic effect in thin film barium titanate

NASA Technical Reports Server (NTRS)

Grannemann, W. W.; Dharmadhikari, V. S.

1983-01-01

The feasibility of making non-volatile digital memory devices of barium titanate, BaTiO3, that are integrated onto a silicon substrate with the required ferroelectric film produced by processing, compatible with silicon technology was examined.

Orthogonal transform feasibility study

NASA Technical Reports Server (NTRS)

Robinson, G. S.

1971-01-01

The application of various orthogonal transformations to communication was investigated, with particular emphasis placed on speech and visual signal processing. The fundamentals of the one- and two-dimensional orthogonal transforms and their application to speech and visual signals are treated in detail.

Brain response to taste in overweight children: A pilot feasibility study.

PubMed

Bohon, Cara

2017-01-01

Understanding the neural response to food and food cues during early stages of weight gain in childhood may help us determine the drive processes involved in unhealthy eating behavior and risk for obesity. Healthy weight and overweight children ages 6-8 (N = 18; 10 with BMI between 5th and 85th %ile and 8 with BMI >85th %ile) underwent fMRI scans while anticipating and receiving tastes of chocolate milkshake. Parents completed a Children's Eating Behaviour Questionnaire. Results reveal greater response to milkshake taste receipt in overweight children in the right insula, operculum, precentral gyrus, and angular gyrus, and bilateral precuneus and posterior cingulate. No group differences were found for brain response to a visual food cue. Exploratory analyses revealed interactions between self-report measures of eating behavior and weight status on brain response to taste. This pilot study provides preliminary evidence of feasibility of studying young children's taste processing and suggests a possible developmental shift in brain response to taste.

Brain response to taste in overweight children: A pilot feasibility study

PubMed Central

Bohon, Cara

2017-01-01

Understanding the neural response to food and food cues during early stages of weight gain in childhood may help us determine the drive processes involved in unhealthy eating behavior and risk for obesity. Healthy weight and overweight children ages 6–8 (N = 18; 10 with BMI between 5th and 85th %ile and 8 with BMI >85th %ile) underwent fMRI scans while anticipating and receiving tastes of chocolate milkshake. Parents completed a Children’s Eating Behaviour Questionnaire. Results reveal greater response to milkshake taste receipt in overweight children in the right insula, operculum, precentral gyrus, and angular gyrus, and bilateral precuneus and posterior cingulate. No group differences were found for brain response to a visual food cue. Exploratory analyses revealed interactions between self-report measures of eating behavior and weight status on brain response to taste. This pilot study provides preliminary evidence of feasibility of studying young children’s taste processing and suggests a possible developmental shift in brain response to taste. PMID:28235080

An in-mold packaging process for plastic fluidic devices.

PubMed

Yoo, Y E; Lee, K H; Je, T J; Choi, D S; Kim, S K

2011-01-01

Micro or nanofluidic devices have many channel shapes to deliver chemical solutions, body fluids or any fluids. The channels in these devices should be covered to prevent the fluids from overflowing or leaking. A typical method to fabricate an enclosed channel is to bond or weld a cover plate to a channel plate. This solid-to-solid bonding process, however, takes a considerable amount of time for mass production. In this study, a new process for molding a cover layer that can enclose open micro or nanochannels without solid-to-solid bonding is proposed and its feasibility is estimated. First, based on the design of a model microchannel, a brass microchannel master core was machined and a plastic microchannel platform was injection-molded. Using this molded platform, a series of experiments was performed for four process or mold design parameters. Some feasible conditions were successfully found to enclosed channels without filling the microchannels for the injection molding of a cover layer over the plastic microchannel platform. In addition, the bond strength and seal performance were estimated in a comparison with those done by conventional bonding or welding processes.

Development and Preliminary Feasibility Study of a Brief Behavioral Activation Mobile Application (Behavioral Apptivation) to Be Used in Conjunction With Ongoing Therapy.

PubMed

Dahne, Jennifer; Kustanowitz, Jacob; Lejuez, C W

2018-02-01

Depressive symptoms are the most frequently treated psychiatric condition in the United States. Brief behavioral activation treatment for depression (BATD) is a popular, evidence-based psychotherapy with strong research support for the treatment of depression. In this paper, we describe the development and initial pilot feasibility testing of a BATD mobile application (Behavioral Apptivation) to be used by patients and therapists in conjunction with BATD therapy. We present information regarding the app development process as well as results from a small open-label feasibility trial of the app utilized in conjunction with individual BATD. We include a case series from the open-label trial highlighting how Behavioral Apptivation can be utilized in clinical practice.

COUPLED IRON CORROSION AND CHROMATE REDUCTION: MECHANISMS FOR SUBSURFACE REMEDIATION

EPA Science Inventory

The reduction of chromium from the Cr(VI) to the Cr- (Ill) state by the presence of elemental, or zero-oxidation-state, iron metal was studied to evaluate the feasibility of such a process for subsurface chromate remediation. Reactions were studied in systems of natural aquifer m...

Feasibility Study of Using Infrared Radiation Heating as a Sustainable Tomato Peeling Method

USDA-ARS?s Scientific Manuscript database

The yye peeling technique is putting both environmental and economic pressure on California tomato processing industry due to its associated salinity issues and wastewater disposal problems. This study is aimed at developing alternative peeling methods with reduced or no caustic usage to produce hi...

Development and feasibility of a Swallowing intervention Package (SiP) for patients receiving radiotherapy treatment for head and neck cancer-the SiP study protocol.

PubMed

Wells, Mary; King, Emma; Toft, Kate; MacAulay, Fiona; Patterson, Joanne; Dougall, Nadine; Hulbert-Williams, Nick; Boa, Sally; Slaven, Eleanor; Cowie, Julie; McGarva, John; Niblock, Patricia Gail; Philp, Julie; Roe, Justin

2016-01-01

Head and neck cancer (HNC) is the sixth most common cancer worldwide, and the functional, psychological and social consequences of HNC cancer and its treatment can be severe and chronic. Dysphagia (swallowing problems) affects up to two thirds of patients undergoing combined chemoradiotherapy. Recent reviews suggest that prophylactic swallowing exercises may improve a range of short- and long-term outcomes; however, the importance of psychological and behavioural factors on adherence to swallowing exercises has not been adequately studied. This study aims to develop and test the feasibility of a Swallowing intervention Package (SiP) designed in partnership with patients, speech and language therapists (SLTs) and other members of the head and neck multi-disciplinary team (MDT), for patients undergoing chemoradiotherapy (CRT) or radiotherapy (RT) for head and neck cancer. This feasibility study uses quantitative and qualitative research methods, within a quasi-experimental design, to assess whether patients will tolerate and adhere to the SiP intervention, which aspects of the intervention can be implemented and which cannot, whether treatment fidelity can be achieved across different contexts, whether study processes and outcome measures will be feasible and acceptable and to what extent the intervention is likely to have an impact on swallowing dysfunction and quality of life. Patients are being recruited from five sites in Scotland and England (three interventions and two usual care). The SLT based in the relevant intervention centre teaches the exercise programme and provides supporting materials. A combination of patient-reported outcome measures (PROMs), adherence measures and clinical swallowing assessments are used prior to intervention (baseline), at the end of treatment, 3 and 6 months post-treatment. This collaborative study has taken a unique approach to the development of a patient-centred and evidence-based swallowing intervention. The introduction of an e-SiP app provides an exploration of the use of technology in delivering this intervention. The study provides an opportunity to examine the feasibility of delivering and participating in a supported swallowing intervention across several different NHS sites and will provide the evidence needed to refine intervention and study processes for a future trial. NCRI portfolio, 18192 & 20259.

Numerical simulation of high speed incremental forming of aluminum alloy

NASA Astrophysics Data System (ADS)

Giuseppina, Ambrogio; Teresa, Citrea; Luigino, Filice; Francesco, Gagliardi

2013-12-01

In this study, an innovative process is analyzed with the aim to satisfy the industrial requirements, such as process flexibility, differentiation and customizing of products, cost reduction, minimization of execution time, sustainable production, etc. The attention is focused on incremental forming process, nowadays used in different fields such as: rapid prototyping, medical sector, architectural industry, aerospace and marine, in the production of molds and dies. Incremental forming consists in deforming only a small region of the workspace through a punch driven by a NC machine. SPIF is the considered variant of the process, in which the punch gives local deformation without dies and molds; consequently, the final product geometry can be changed by the control of an actuator without requiring a set of different tools. The drawback of this process is its slowness. The aim of this study is to assess the IF feasibility at high speeds. An experimental campaign will be performed by a CNC lathe with high speed to test process feasibility and the influence on materials formability mainly on aluminum alloys. The first results show how the material presents the same performance than in conventional speed IF and, in some cases, better material behavior due to the temperature field. An accurate numerical simulation has been performed to investigate the material behavior during the high speed process substantially confirming experimental evidence.

Implementation of a lung cancer multidisciplinary team standardised template for reporting to general practitioners: a mixed-method study

PubMed Central

Collett, Gemma K; Brown, Clare M; Shaw, Tim J; White, Kahren M; Beale, Philip J; Anderiesz, Cleola; Barnes, David J

2017-01-01

Objectives Few interventions have been designed that provide standardised information to primary care clinicians about the diagnostic and treatment recommendations resulting from cancer multidisciplinary team (MDT) (tumour board) meetings. This study aimed to develop, implement and evaluate a standardised template for lung cancer MDTs to provide clinical information and treatment recommendations to general practitioners (GPs). Specific objectives were to (1) evaluate template feasibility (acceptability, appropriateness and timeliness) with GPs and (2) document processes of preimplementation, implementation and evaluation within the MDT setting. Design A mixed-method study design using structured interviews with GPs and qualitative documentation of project logs about implementation processes. Setting Two hospitals in Central Sydney, New South Wales, Australia. Participants: 61 GPs evaluated the template. Two lung cancer MDTs, consisting of 33 clinicians, and eight researchers participated in template development and implementation strategy. Results The MDT-reporting template appears to be a feasible way of providing clinical information to GPs following patient presentation at a lung cancer MDT meeting. Ninety-five per cent of GPs strongly agreed or agreed that the standardised template provided useful and relevant information, that it was received in a timely manner (90%) and that the information was easy to interpret and communicate to the patient (84%). Implementation process data show that the investment made in the preimplementation stage to integrate the template into standard work practices was a critical factor in successful implementation. Conclusions This study demonstrates that it is feasible to provide lung cancer MDT treatment recommendations to GPs through implementation of a standardised template. A simple intervention, such as a standardised template, can help to address quality gaps and ensure that timely information is communicated between tertiary and primary care healthcare providers. PMID:29288182

Generation of control sequences for a pilot-disassembly system

NASA Astrophysics Data System (ADS)

Seliger, Guenther; Kim, Hyung-Ju; Keil, Thomas

2002-02-01

Closing the product and material cycles has emerged as a paradigm for industry in the 21st century. Disassembly plays a key role in a life cycle economy since it enables the recovery of resources. A partly automated disassembly system should adapt to a large variety of products and different degrees of devaluation. Also the amounts of products to be disassembled can vary strongly. To cope with these demands an approach to generate on-line disassembly control sequences will be presented. In order to react on these demands the technological feasibility is considered within a procedure for the generation of disassembly control sequences. Procedures are designed to find available and technologically feasible disassembly processes. The control system is formed by modularised and parameterised control units in the cell level within the entire control architecture. In the first development stage product and process analyses at the sample product washing machine were executed. Furthermore a generalized disassembly process was defined. Afterwards these processes were structured in primary and secondary functions. In the second stage the disassembly control at the technological level was investigated. Factors were the availability of the disassembly tools and the technological feasibility of the disassembly processes within the disassembly system. Technical alternative disassembly processes are determined as a result of availability of the tools and technological feasibility of processes. The fourth phase was the concept for the generation of the disassembly control sequences. The approach will be proved in a prototypical disassembly system.

Organization Domain Modeling. Volume 1. Conceptual Foundations, Process and Workproduct Description

DTIC Science & Technology

1993-07-31

J.A. Hess, W.E. Novak, and A.S. Peterson. Feature-Oriented Domain Analysis ( FODA ) Feasibility Study. Technical Report CMU/SEI-90-TR-21, Software...domain analysis (DA) and modeling, including a structured set of workproducts, a tailorable process model and a set of modeling techniques and guidelines...23 5.3.1 U sability Analysis (Rescoping) ..................................................... 24

Formal Foundations for the Specification of Software Architecture.

DTIC Science & Technology

1995-03-01

Architectures For- mally: A Case-Study Using KWIC." Kestrel Institute, Palo Alto, CA 94304, April 1994. 58. Kang, Kyo C. Feature-Oriented Domain Analysis ( FODA ...6.3.5 Constraint-Based Architectures ................. 6-60 6.4 Summary ......... ............................. 6-63 VII. Analysis of Process-Based...between these architec- ture theories were investigated. A feasibility analysis on an image processing application demonstrated that architecture theories

K-space data processing for magnetic resonance elastography (MRE).

PubMed

Corbin, Nadège; Breton, Elodie; de Mathelin, Michel; Vappou, Jonathan

2017-04-01

Magnetic resonance elastography (MRE) requires substantial data processing based on phase image reconstruction, wave enhancement, and inverse problem solving. The objective of this study is to propose a new, fast MRE method based on MR raw data processing, particularly adapted to applications requiring fast MRE measurement or high elastogram update rate. The proposed method allows measuring tissue elasticity directly from raw data without prior phase image reconstruction and without phase unwrapping. Experimental feasibility is assessed both in a gelatin phantom and in the liver of a porcine model in vivo. Elastograms are reconstructed with the raw MRE method and compared to those obtained using conventional MRE. In a third experiment, changes in elasticity are monitored in real-time in a gelatin phantom during its solidification by using both conventional MRE and raw MRE. The raw MRE method shows promising results by providing similar elasticity values to the ones obtained with conventional MRE methods while decreasing the number of processing steps and circumventing the delicate step of phase unwrapping. Limitations of the proposed method are the influence of the magnitude on the elastogram and the requirement for a minimum number of phase offsets. This study demonstrates the feasibility of directly reconstructing elastograms from raw data.

STARS Conceptual Framework for Reuse Processes (CFRP). Volume 2: application Version 1.0

DTIC Science & Technology

1993-09-30

Analysis and Design DISA/CIM process x OProcess [DIS93] Feature-Oriented Domain SEI process x Analysis ( FODA ) [KCH+90] JIAWG Object-Oriented Domain JIAWG...Domain Analysis ( FODA ) Feasibility Study. Technical Report CMU/S[1 ,N. I R 21. Soft- ware Engineering Institute, Carnegie Mellon University, Pittsburgh...Electronic Systems Center Air Force Materiel Command, USAF Hanscom AFB, MA 01731-5000 Prepared by: The Boeing Company , IBM, Unisys Corporation, Defense

Economic analysis of wind-powered refrigeration cooling/water-heating systems in food processing. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garling, W.S.; Harper, M.R.; Merchant-Geuder, L.

1980-03-01

Potential applications of wind energy include not only large central turbines that can be utilized by utilities, but also dispersed systems for farms and other applications. The US Departments of Energy (DOE) and Agriculture (USDA) currently are establishing the feasibility of wind energy use in applications where the energy can be used as available, or stored in a simple form. These applications include production of hot water for rural sanitation, heating and cooling of rural structures and products, drying agricultural products, and irrigation. This study, funded by USDA, analyzed the economic feasibility of wind power in refrigeration cooling and watermore » heating systems in food processing plants. Types of plants included were meat and poultry, dairy, fruit and vegetable, and aquaculture.« less

Is an advance care planning model feasible in community palliative care? A multi-site action research approach.

PubMed

Blackford, Jeanine; Street, Annette

2012-09-01

This article reports a study to determine the feasibility of an advance care planning model developed with Australian community palliative care services. An effective advance care planning programme involves an organizational wide commitment and preparedness for health service reform to embed advance care planning into routine practice. Internationally, such programmes have been implemented predominantly in aged and acute care with more recent work in primary care. A multi-site action research was conducted over a 16-month period in 2007-2009 with three Victorian community palliative care services. Using mixed method data collection strategies to assess feasibility, we conducted a baseline audit of staff and clients; analysed relevant documents (client records, policies, procedures and quality improvement strategies) pre-implementation and post-implementation and conducted key informant interviews (n = 9). Three community palliative care services: one regional and two metropolitan services in Victoria, Australia. The services demonstrated that it was feasible to embed the Model into their organizational structures. Advance care planning conversations and involvement of family was an important outcome measure rather than completion rate of advance care planning documents in community settings. Services adapted and applied their own concept of community, which widened the impact of the model. Changes to quality audit processes were essential to consolidate the model into routine palliative care practice. An advance care planning model is feasible for community palliative care services. Quality audit processes are an essential component of the Model with documentation of advance care planning discussion established as an important outcome measure. © 2011 Blackwell Publishing Ltd.

Designing Interactive Electronic Module in Chemistry Lessons

NASA Astrophysics Data System (ADS)

Irwansyah, F. S.; Lubab, I.; Farida, I.; Ramdhani, M. A.

2017-09-01

This research aims to design electronic module (e-module) oriented to the development of students’ chemical literacy on the solution colligative properties material. This research undergoes some stages including concept analysis, discourse analysis, storyboard design, design development, product packaging, validation, and feasibility test. Overall, this research undertakes three main stages, namely, Define (in the form of preliminary studies); Design (designing e-module); Develop (including validation and model trial). The concept presentation and visualization used in this e-module is oriented to chemical literacy skills. The presentation order carries aspects of scientific context, process, content, and attitude. Chemists and multi media experts have done the validation to test the initial quality of the products and give a feedback for the product improvement. The feasibility test results stated that the content presentation and display are valid and feasible to be used with the value of 85.77% and 87.94%. These values indicate that this e-module oriented to students’ chemical literacy skills for the solution colligative properties material is feasible to be used.

Feasibility of a multifaceted educational strategy for strengthening rural primary health care.

PubMed

Reyes-Morales, Hortensia; Gómez-Bernal, Enrique; Gutiérrez-Alba, Gaudencio; Aguilar-Ye, Arturo; Ruiz-Larios, José Arturo; Alonso-Núñez, Gabriel de Jesús

2017-01-01

To evaluate the feasibility and acceptability of a comprehensive educational strategy designed to improve care quality in rural areas of Mexico. A demonstration study was performed in 18 public rural health centers in Mexico, including an educational intervention that consists of the following steps: Development of the strategy; Selection and training of instructors (specialist physicians from the referral hospital and multidisciplinary field teams); Implementation of the strategy among health care teams for six priority causes of visit, through workshops, individual tutorials, and round-table case-review sessions. Feasibility and acceptability were evaluated using checklists, direct observation, questionnaires and in-depth interviews with key players. Despite some organizational barriers, the strategy was perceived as worthy by the participants because of the personalized tutorials and the improved integration of health teams within their usual professional practice. The educational strategy proved to be acceptable; its feasibility for usual care conditions will depend on the improvement of organizational processes at rural facilities.

Automated Array Assembly Task In-depth Study of Silicon Wafer Surface Texturizing

NASA Technical Reports Server (NTRS)

Jones, G. T.; Chitre, S.; Rhee, S. S.; Allison, K. L.

1979-01-01

A low cost wafer surface texturizing process was studied. An investigation of low cost cleaning operations to clean residual wax and organics from the surface of silicon wafers was made. The feasibility of replacing dry nitrogen with clean dry air for drying silicon wafers was examined. The two stage texturizing process was studied for the purpose of characterizing relevant parameters in large volume applications. The effect of gettering solar cells on photovoltaic energy conversion efficiency is described.

Assessment of food processing and pharmaceutical industrial wastes as potential biosorbents: a review.

PubMed

El-Sayed, Hanan E M; El-Sayed, Mayyada M H

2014-01-01

There is a growing need for the use of low-cost and ecofriendly adsorbents in water/wastewater treatment applications. Conventional adsorbents as well as biosorbents from different natural and agricultural sources have been extensively studied and reviewed. However, there is a lack of reviews on biosorption utilizing industrial wastes, particularly those of food processing and pharmaceuticals. The current review evaluates the potential of these wastes as biosorbents for the removal of some hazardous contaminants. Sources and applications of these biosorbents are presented, while factors affecting biosorption are discussed. Equilibrium, kinetics, and mechanisms of biosorption are also reviewed. In spite of the wide spread application of these biosorbents in the treatment of heavy metals and dyes, more research is required on other classes of pollutants. In addition, further work should be dedicated to studying scaling up of the process and its economic feasibility. More attention should also be given to enhancing mechanical strength, stability, life time, and reproducibility of the biosorbent. Environmental concerns regarding disposal of consumed biosorbents should be addressed by offering feasible biosorbent regeneration or pollutant immobilization options.

Assessment of Food Processing and Pharmaceutical Industrial Wastes as Potential Biosorbents: A Review

PubMed Central

El-Sayed, Hanan E. M.; El-Sayed, Mayyada M. H.

2014-01-01

There is a growing need for the use of low-cost and ecofriendly adsorbents in water/wastewater treatment applications. Conventional adsorbents as well as biosorbents from different natural and agricultural sources have been extensively studied and reviewed. However, there is a lack of reviews on biosorption utilizing industrial wastes, particularly those of food processing and pharmaceuticals. The current review evaluates the potential of these wastes as biosorbents for the removal of some hazardous contaminants. Sources and applications of these biosorbents are presented, while factors affecting biosorption are discussed. Equilibrium, kinetics, and mechanisms of biosorption are also reviewed. In spite of the wide spread application of these biosorbents in the treatment of heavy metals and dyes, more research is required on other classes of pollutants. In addition, further work should be dedicated to studying scaling up of the process and its economic feasibility. More attention should also be given to enhancing mechanical strength, stability, life time, and reproducibility of the biosorbent. Environmental concerns regarding disposal of consumed biosorbents should be addressed by offering feasible biosorbent regeneration or pollutant immobilization options. PMID:25110656

Feasibility and potential efficacy of the family-centered Prevent-Teach-Reinforce model with families of children with developmental disorders.

PubMed

Bailey, Kathleen M; Blair, Kwang-Sun Cho

2015-12-01

This study examined the feasibility and potential efficacy of the family-centered Prevent-Teach-Reinforce (PTR) model with three families of young children with an autism spectrum disorder or language delay with sensory processing problems. Particularly, the study assessed the family adherence to the PTR intervention, changes in child behavior, family use of the Individualized Behavior Rating Scale Tool (IBRST), procedural integrity, and social validity. A multiple-baseline design across families was used to examine the functional relation between parent-implemented PTR intervention and changes in child behavior. Results indicated that the family-centered PTR process was successful in promoting parents to design and implement the PTR intervention plans with fidelity, and the parents' implemented intervention plans were effective in increasing replacement behavior and decreasing problem behavior across children. The results also indicated that the parents successfully used the IBRST to monitor their child's progress and were highly satisfied with the PTR intervention process and outcomes for their children. Copyright © 2015 Elsevier Ltd. All rights reserved.

Theoretical studies on stability and feasibility of 0.34 THz EIK

NASA Astrophysics Data System (ADS)

Li, Shuang; Wang, Jianguo; Wang, Guangqiang; Wang, Dongyang

2017-05-01

The stability of the circuit and the tolerance during the manufacture process are theoretically studied in the design of 0.34 THz extended interaction klystron, which are helpful to increase the feasibility of the device. By using the small signal theory, the beam-loading conductance is studied to increase the efficiency of the beam-wave interaction. Combined with the study of start current for oscillation modes, the analysis of stability in multi-gap cavity is proposed, leading to the optimization of cavity. As a crucial factor affecting the ultimate performance of device, the inaccuracy during the fabrication process is researched. The acceptable tolerance is summarized through discussion of various geometrical dimensions' influences on cavity's characteristics. The study of power loss in the conductive wall is presented and the copper is believed to be adapted in making the device practicable with low attenuation. The physical design is simulated and verified by the particle-in-cell (PIC) method, and the results show that the output power of 142 W can be reached steadily at the frequency of 347.7 GHz, approaching the gain of 37.9 dB.

Optimization of Feasibility Stage for Hydrogen/Deuterium Exchange Mass Spectrometry

NASA Astrophysics Data System (ADS)

Hamuro, Yoshitomo; Coales, Stephen J.

2018-03-01

The practice of HDX-MS remains somewhat difficult, not only for newcomers but also for veterans, despite its increasing popularity. While a typical HDX-MS project starts with a feasibility stage where the experimental conditions are optimized and the peptide map is generated prior to the HDX study stage, the literature usually reports only the HDX study stage. In this protocol, we describe a few considerations for the initial feasibility stage, more specifically, how to optimize quench conditions, how to tackle the carryover issue, and how to apply the pepsin specificity rule. Two sets of quench conditions are described depending on the presence of disulfide bonds to facilitate the quench condition optimization process. Four protocols are outlined to minimize carryover during the feasibility stage: (1) addition of a detergent to the quench buffer, (2) injection of a detergent or chaotrope to the protease column after each sample injection, (3) back-flushing of the trap column and the analytical column with a new plumbing configuration, and (4) use of PEEK (or PEEK coated) frits instead of stainless steel frits for the columns. The application of the pepsin specificity rule after peptide map generation and not before peptide map generation is suggested. The rule can be used not only to remove falsely identified peptides, but also to check the sample purity. A well-optimized HDX-MS feasibility stage makes subsequent HDX study stage smoother and the resulting HDX data more reliable. [Figure not available: see fulltext.

Wood fueled boiler financial feasibility user's manual

Treesearch

Robert Govett; Scott Bowe; Terry Mace; Steve Hubbard; John (Rusty) Dramm; Richard Bergman

2005-01-01

“Wood Fueled Boiler Financial Feasibility” is a spreadsheet program designed for easy use on a personal computer. This program provides a starting point for interested parties to perform financial feasibility analysis of a steam boiler system for space heating or process heat. By allowing users to input the conditions applicable to their current or proposed fuel...

Manufacturing methods of a composite cell case for a Ni-Cd battery

NASA Technical Reports Server (NTRS)

Bauer, J. L.

1979-01-01

Basic manufacturing method refinements for using graphite epoxy material for a nickel cadmium battery cell case were performed to demonstrate production feasibility. The various facets of production scale-up, i.e., process and tooling development, together with material and process control, were integrated into a comprehensive manufacturing process that assures production reproducibility and product uniformity. Test results substantiate that a battery cell case produced from graphite epoxy pre-impregnated material, utilizing the internal pressure bag fabrication method, is feasible.

Evaluation of a novel information resource for patients with bronchiectasis: study protocol for a randomised controlled trial.

PubMed

Hester, Katy L M; Newton, Julia; Rapley, Tim; De Soyza, Anthony

2016-04-23

There is currently little patient information on bronchiectasis, a chronic lung disease with rising prevalence. Previous work shows that patients and their families want more information, which could potentially improve their understanding and self-management. Using interviews and focus groups, we have co-developed a novel patient and carer information resource, aiming to meet their identified needs. The aims and objectives are: 1. To assess the potential impact of the information resource 2. To evaluate and refine the intervention 3. To establish the feasibility of carrying out a multi-centre randomised controlled trial to determine its effect on understanding, self-management and health outcomes This is a feasibility study, with a single-centre, randomised controlled trial design, comparing use of a novel patient information resource to usual care in bronchiectasis. Additionally, patients and carers will be invited to focus groups to discuss their views on both the intervention itself and the trial process. The study duration for each participant will be 3 months from the study entry date. A total of 70 patients will be recruited to the study, and a minimum of 30 will be randomised to each arm. Ten participants (and their carers if applicable) will be invited to attend focus groups on completion of the study visits. Participants will be adults with bronchiectasis diagnosed as per national bronchiectasis guidelines. Once consented, participants will be randomised to the intervention or control arm using random permuted blocks to ensure treatment group numbers are evenly balanced. Randomisation will be web-based. Those randomised to the intervention will receive the information resource (website and booklet) and instructions on its use. Outcome measures (resource satisfaction, resource use and alternative information seeking, quality of life questionnaires, unscheduled healthcare visits, exacerbation frequency, bronchiectasis knowledge questionnaire and lung function tests) will be recorded at baseline, 2 weeks and 3 months. All outcome measures will be used in assessing feasibility and acceptability of a future definitive trial. Feasibility outcomes include recruitment, retention and study scale form completion rates. Focus groups will strengthen qualitative data for resource refinement and to identify participant views on the trial process, which will also inform feasibility assessments. Questionnaires will also be used to evaluate and refine the resource. ISRCTN84229105.

The scientific programme between ESRO and ESA: Choosing new projects (1973-1977)

NASA Astrophysics Data System (ADS)

Russo, Arturo

1995-02-01

The ESA History Study Reports are preliminary reports of studies carried out within the framework of an ESA (European Space Agency) contract. They will form the basis of a comprehensive study of European Space activities covering the period 1959-1987. The transformation of ESRO (European Space Research Organization) into ESA found the Organization's bodies involved in a new round of the decision-making process to select future scientific satellite projects. In this report, the three main phases of the decision-making process are discussed. The first, from June 1973 to April 1974, the European scientific community and their representatives in ESA's advisory committee structure were invited to agree on a set of space missions for which a definition study was recommended. At the end of this phase, thirteen missions were selected for such a definition study by ESRO's Scientific Program Board (SPB). The second phase covers the period from that decision up to March 1975, when a much more important decision was required, namely to select a restricted number of missions for which a feasibility study was to be performed. The aims of such feasibility studies were to establish the technical and financial feasibility of each project, to propose a well-defined project concept, to identify the research and technology effort required to support it, and to state a preliminary cost estimate to completion. The third phase covers the first two years of the new Agency's life, and concludes with the selection of the projects to be adopted in ESA's scientific program.

Using Persuasion Models to Identify Givers.

ERIC Educational Resources Information Center

Ferguson, Mary Ann; And Others

1986-01-01

Assesses the feasibility of and suggests using W. J. McGuire's information processing theory and cognitive response analysis theory in research studies to identify "givers"--those who are likely to contribute money and resources to charities or volunteer to aid philanthropic organizations. (SRT)

7 CFR 4284.510 - Application processing.

Code of Federal Regulations, 2010 CFR

2010-01-01

... organizations receiving the assistance, and the transferability of its Cooperative development strategy and... solutions for complex cooperative development or marketing problems, or those with a record of conducting feasibility studies that later proved to be accurate, business planning, marketing analysis, or other...

Study of materials for space processing. [with emphasis on crystal growth

NASA Technical Reports Server (NTRS)

Lal, R. B.

1974-01-01

A handbook is presented of materials feasible for growth in space in future NASA Missions. Major emphasis was placed on a literature survey concerned with promising materials. Equipment for resistivity and hall effect set-up was procured.

Economic feasibility study for new technological alternatives in wastewater treatment processes: a review.

PubMed

Molinos-Senante, María; Hernández-Sancho, Francesc; Sala-Garrido, Ramón

2012-01-01

The concept of sustainability involves the integration of economic, environmental, and social aspects and this also applies in the field of wastewater treatment. Economic feasibility studies are a key tool for selecting the most appropriate option from a set of technological proposals. Moreover, these studies are needed to assess the viability of transferring new technologies from pilot-scale to full-scale. In traditional economic feasibility studies, the benefits that have no market price, such as environmental benefits, are not considered and are therefore underestimated. To overcome this limitation, we propose a new methodology to assess the economic viability of wastewater treatment technologies that considers internal and external impacts. The estimation of the costs is based on the use of cost functions. To quantify the environmental benefits from wastewater treatment, the distance function methodology is proposed to estimate the shadow price of each pollutant removed in the wastewater treatment. The application of this methodological approach by decision makers enables the calculation of the true costs and benefits associated with each alternative technology. The proposed methodology is presented as a useful tool to support decision making.

The feasibility of community level interventions for pre-eclampsia in South Asia and Sub-Saharan Africa: a mixed-methods design.

PubMed

Khowaja, Asif Raza; Qureshi, Rahat Najam; Sawchuck, Diane; Oladapo, Olufemi T; Adetoro, Olalekan O; Orenuga, Elizabeth A; Bellad, Mrutyunjaya; Mallapur, Ashalata; Charantimath, Umesh; Sevene, Esperança; Munguambe, Khátia; Boene, Helena Edith; Vidler, Marianne; Bhutta, Zulfiqar A; von Dadelszen, Peter

2016-06-08

Globally, pre-eclampsia and eclampsia are major contributors to maternal and perinatal mortality; of which the vast majority of deaths occur in less developed countries. In addition, a disproportionate number of morbidities and mortalities occur due to delayed access to health services. The Community Level Interventions for Pre-eclampsia (CLIP) Trial aims to task-shift to community health workers the identification and emergency management of pre-eclampsia and eclampsia to improve access and timely care. Literature revealed paucity of published feasibility assessments prior to initiating large-scale community-based interventions. Arguably, well-conducted feasibility studies can provide valuable information about the potential success of clinical trials prior to implementation. Failure to fully understand the study context risks the effective implementation of the intervention and limits the likelihood of post-trial scale-up. Therefore, it was imperative to conduct community-level feasibility assessments for a trial of this magnitude. A mixed methods design guided by normalization process theory was used for this study in Nigeria, Mozambique, Pakistan, and India to explore enabling and impeding factors for the CLIP Trial implementation. Qualitative data were collected through participant observation, document review, focus group discussion and in-depth interviews with diverse groups of community members, key informants at community level, healthcare providers, and policy makers. Quantitative data were collected through health facility assessments, self-administered community health worker surveys, and household demographic and health surveillance. Refer to CLIP Trial feasibility publications in the current and/or forthcoming supplement. Feasibility assessments for community level interventions, particularly those involving task-shifting across diverse regions, require an appropriate theoretical framework and careful selection of research methods. The use of qualitative and quantitative methods increased the data richness to better understand the community contexts. NCT01911494.

Evaluation of the implementation of a quality system in a basic research laboratory: viability and impacts.

PubMed

Fraga, Hilda Carolina de Jesus Rios; Fukutani, Kiyoshi Ferreira; Celes, Fabiana Santana; Barral, Aldina Maria Prado; Oliveira, Camila Indiani de

2012-01-01

To evaluate the process of implementing a quality management system in a basic research laboratory of a public institution, particularly considering the feasibility and impacts of this improvement. This was a prospective and qualitative study. We employed the norm "NIT DICLA 035--Princípios das Boas Práticas de Laboratório (BPL)" and auxiliary documents of Organisation for Economic Co-operation and Development to complement the planning and implementation of a Quality System, in a basic research laboratory. In parallel, we used the PDCA tool to define the goals of each phase of the implementation process. This study enabled the laboratory to comply with the NIT DICLA 035 norm and to implement this norm during execution of a research study. Accordingly, documents were prepared and routines were established such as the registration of non-conformities, traceability of research data and equipment calibration. The implementation of a quality system, the setting of a laboratory focused on basic research is feasible once certain structural changes are made. Importantly, impacts were noticed during the process, which could be related to several improvements in the laboratory routine.

Feasibility Study of a Generalized Framework for Developing Computer-Aided Detection Systems-a New Paradigm.

PubMed

Nemoto, Mitsutaka; Hayashi, Naoto; Hanaoka, Shouhei; Nomura, Yukihiro; Miki, Soichiro; Yoshikawa, Takeharu

2017-10-01

We propose a generalized framework for developing computer-aided detection (CADe) systems whose characteristics depend only on those of the training dataset. The purpose of this study is to show the feasibility of the framework. Two different CADe systems were experimentally developed by a prototype of the framework, but with different training datasets. The CADe systems include four components; preprocessing, candidate area extraction, candidate detection, and candidate classification. Four pretrained algorithms with dedicated optimization/setting methods corresponding to the respective components were prepared in advance. The pretrained algorithms were sequentially trained in the order of processing of the components. In this study, two different datasets, brain MRA with cerebral aneurysms and chest CT with lung nodules, were collected to develop two different types of CADe systems in the framework. The performances of the developed CADe systems were evaluated by threefold cross-validation. The CADe systems for detecting cerebral aneurysms in brain MRAs and for detecting lung nodules in chest CTs were successfully developed using the respective datasets. The framework was shown to be feasible by the successful development of the two different types of CADe systems. The feasibility of this framework shows promise for a new paradigm in the development of CADe systems: development of CADe systems without any lesion specific algorithm designing.

Feasibility study design and methods for a home-based, square-stepping exercise program among older adults with multiple sclerosis: The SSE-MS project.

PubMed

Sebastião, Emerson; McAuley, Edward; Shigematsu, Ryosuke; Motl, Robert W

2017-09-01

We propose a randomized controlled trial (RCT) examining the feasibility of square-stepping exercise (SSE) delivered as a home-based program for older adults with multiple sclerosis (MS). We will assess feasibility in the four domains of process, resources, management and scientific outcomes. The trial will recruit older adults (aged 60 years and older) with mild-to-moderate MS-related disability who will be randomized into intervention or attention control conditions. Participants will complete assessments before and after completion of the conditions delivered over a 12-week period. Participants in the intervention group will have biweekly meetings with an exercise trainer in the Exercise Neuroscience Research Laboratory and receive verbal and visual instruction on step patterns for the SSE program. Participants will receive a mat for home-based practice of the step patterns, an instruction manual, and a logbook and pedometer for monitoring compliance. Compliance will be further monitored through weekly scheduled Skype calls. This feasibility study will inform future phase II and III RCTs that determine the actual efficacy and effectiveness of a home-based exercise program for older adults with MS.

Self-management toolkit and delivery strategy for end-of-life pain: the mixed-methods feasibility study.

PubMed

Bennett, Michael I; Mulvey, Matthew R; Campling, Natasha; Latter, Sue; Richardson, Alison; Bekker, Hilary; Blenkinsopp, Alison; Carder, Paul; Closs, Jose; Farrin, Amanda; Flemming, Kate; Gallagher, Jean; Meads, David; Morley, Stephen; O'Dwyer, John; Wright-Hughes, Alexandra; Hartley, Suzanne

2017-12-01

Pain affects most people approaching the end of life and can be severe for some. Opioid analgesia is effective, but evidence is needed about how best to support patients in managing these medicines. To develop a self-management support toolkit (SMST) and delivery strategy and to test the feasibility of evaluating this intervention in a future definitive trial. Phase I - evidence synthesis and qualitative interviews with patients and carers. Phase II - qualitative semistructured focus groups and interviews with patients, carers and specialist palliative care health professionals. Phase III - multicentre mixed-methods single-arm pre-post observational feasibility study. Phase I - six patients and carers. Phase II - 15 patients, four carers and 19 professionals. Phase III - 19 patients recruited to intervention that experienced pain, living at home and were treated with strong opioid analgesia. Process evaluation interviews with 13 patients, seven carers and 11 study nurses. Self-Management of Analgesia and Related Treatments at the end of life (SMART) intervention comprising a SMST and a four-step educational delivery approach by clinical nurse specialists in palliative care over 6 weeks. Recruitment rate, treatment fidelity, treatment acceptability, patient-reported outcomes (such as scores on the Brief Pain Inventory, Self-Efficacy for Managing Chronic Disease Scale, Edmonton Symptom Assessment Scale, EuroQol-5 Dimensions, Satisfaction with Information about Medicines Scale, and feasibility of collecting data on health-care resource use for economic evaluation). Phase I - key themes on supported self-management were identified from evidence synthesis and qualitative interviews. Phase II - the SMST was developed and refined. The delivery approach was nested within a nurse-patient consultation. Phase III - intervention was delivered to 17 (89%) patients, follow-up data at 6 weeks were available on 15 patients. Overall, the intervention was viewed as acceptable and valued. Descriptive analysis of patient-reported outcomes suggested that interference from pain and self-efficacy were likely to be candidates for primary outcomes in a future trial. No adverse events related to the intervention were reported. The health economic analysis suggested that SMART could be cost-effective. We identified key limitations and considerations for a future trial: improve recruitment through widening eligibility criteria, refine the SMST resources content, enhance fidelity of intervention delivery, secure research nurse support at recruiting sites, refine trial procedures (including withdrawal process and data collection frequency), and consider a cluster randomised design with nurse as cluster unit. (1) The recruitment rate was lower than anticipated. (2) The content of the intervention was focused on strong opioids only. (3) The fidelity of intervention delivery was limited by the need for ongoing training and support. (4) Recruitment sites where clinical research nurse support was not secured had lower recruitment rates. (5) The process for recording withdrawal was not sufficiently detailed. (6) The number of follow-up visits was considered burdensome for some participants. (7) The feasibility trial did not have a control arm or assess randomisation processes. A future randomised controlled trial is feasible and acceptable. This study is registered as PROSPERO CRD42014013572; Current Controlled Trials ISRCTN35327119; and National Institute for Health Research (NIHR) Portfolio registration 162114. The NIHR Health Technology Assessment programme.

Engaging stakeholders and target groups in prioritising a public health intervention: the Creating Active School Environments (CASE) online Delphi study.

PubMed

Morton, Katie L; Atkin, Andrew J; Corder, Kirsten; Suhrcke, Marc; Turner, David; van Sluijs, Esther M F

2017-01-13

Stakeholder engagement and public involvement are considered as integral to developing effective public health interventions and is encouraged across all phases of the research cycle. However, limited guidelines and appropriate tools exist to facilitate stakeholder engagement-especially during the intervention prioritisation phase. We present the findings of an online 'Delphi' study that engaged stakeholders (including young people) in the process of prioritising secondary school environment-focused interventions that aim to increase physical activity. Web-based data collection using an online Delphi tool enabling participation of geographically diverse stakeholders. 37 stakeholders participated, including young people (age 13-16 years), parents, teachers, public health practitioners, academics and commissioners; 33 participants completed both rounds. Participants were asked to prioritise a (short-listed) selection of school environment-focused interventions (eg, standing desks, outdoor design changes) based on the criteria of 'reach', 'equality', 'acceptability', 'feasibility', 'effectiveness' and 'cost'. Participants were also asked to rank the criteria and the effectiveness outcomes (eg, physical activity, academic achievement, school enjoyment) from most to least important. Following feedback along with any new information provided, participants completed round 2 4 weeks later. The intervention prioritisation process was feasible to conduct and comments from participants indicated satisfaction with the process. Consensus regarding intervention strategies was achieved among the varied groups of stakeholders, with 'active lessons' being the favoured approach. Participants ranked 'mental health and well-being' as the most important outcome followed by 'enjoyment of school'. The most important criteria was 'effectiveness', followed by 'feasibility'. This novel approach to engaging a wide variety of stakeholders in the research process was feasible to conduct and acceptable to participants. It also provided insightful information relating to how stakeholders prioritise interventions. The approach could be extended beyond the specific project to be a useful tool for researchers and practitioners. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Quality Measures for Hospice and Palliative Care: Piloting the PEACE Measures

PubMed Central

Rokoske, Franziska S.; Durham, Danielle; Cagle, John G.; Hanson, Laura C.

2014-01-01

Abstract Background: The Carolinas Center for Medical Excellence launched the PEACE project in 2006, under contract with the Centers for Medicare & Medicaid Services (CMS), to identify, develop, and pilot test quality measures for hospice and palliative care programs. Objectives: The project collected pilot data to test the usability and feasibility of potential quality measures and data collection processes for hospice and palliative care programs. Settings/subjects: Twenty-two hospices participating in a national Quality Improvement Collaborative (QIC) submitted data from 367 chart reviews for pain care and 45 chart reviews for nausea care. Fourteen additional hospices completed a one-time data submission of 126 chart reviews on 60 potential patient-level quality measures across eight domains of care and an organizational assessment evaluating structure and processes of care. Design: Usability was assessed by examining the range, variability and size of the populations targeted by each quality measure. Feasibility was assessed during the second pilot study by surveying data abstractors about the abstraction process and examining the rates of missing data. The impact of data collection processes was assessed by comparing results obtained using different processes. Results: Measures shown to be both usable and feasible included: screening for physical symptoms on admission and documentation of treatment preferences. Methods of data collection and measure construction appear to influence observed rates of quality of care. Conclusions: We successfully identified quality measures with potential for use in hospices and palliative care programs. Future research is needed to understand whether these measures are sensitive to quality improvement interventions. PMID:24921162

COMPONENTS FOR SCHOOL CONSTRUCTION IN THE MID-HUDSON REGION. PROGRESS REPORT 1.

ERIC Educational Resources Information Center

GREEN, ALAN C.; AND OTHERS

THIS REPORT IS PART 1 OF A FEASIBILITY STUDY TO SAMPLE APPROPRIATE ASPECTS OF THE SCHOOL CONSTRUCTION FACTORS IN NEW YORK STATE. THE STUDY IS TO DETERMINE WHETHER THE SCHOOL CONSTRUCTION SYSTEMS DEVELOPMENT PROCESS IS APPLICABLE TO SCHOOL CONSTRUCTION IN THE MID-HUDSON VALLEY. THE STUDY ALSO EXPLORES POSSIBLE MEANS BY WHICH SUCH SCHOOL BUILDINGS…

Social Network Supported Process Recommender System

PubMed Central

Ye, Yanming; Yin, Jianwei; Xu, Yueshen

2014-01-01

Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced. PMID:24672309

FBI fingerprint identification automation study. AIDS 3 evaluation report. Volume 3: Operational feasibility

NASA Technical Reports Server (NTRS)

Mulhall, B. D. L.

1980-01-01

An evaluation is presented which is defined as the adequacy of system design with known functional and performance requirements. The proposed Rockwell International AIDS 3 card, document and data flow are presented to summarize the concepts involved and the relationships between functions. The analysis and evaluation includes a study of system capability, processing rates, search requirements and response accuracy as well as a consideration of operational components and hardware integration. Results indicate that the AIDS 3 System concept is operationally feasible if production capacity is slightly enhanced but that operational complexity, hardware integration and a lack of conceptual data pertinent to some of the functions are areas of concern.

Implementing the NICE osteoarthritis guidelines: a mixed methods study and cluster randomised trial of a model osteoarthritis consultation in primary care--the Management of OsteoArthritis In Consultations (MOSAICS) study protocol.

PubMed

Dziedzic, Krysia S; Healey, Emma L; Porcheret, Mark; Ong, Bie Nio; Main, Chris J; Jordan, Kelvin P; Lewis, Martyn; Edwards, John J; Jinks, Clare; Morden, Andrew; McHugh, Gretl A; Ryan, Sarah; Finney, Andrew; Jowett, Sue; Oppong, Raymond; Afolabi, Ebenezer; Pushpa-Rajah, Angela; Handy, June; Clarkson, Kris; Mason, Elizabeth; Whitehurst, Tracy; Hughes, Rhian W; Croft, Peter R; Hay, Elaine M

2014-08-27

There is as yet no evidence on the feasibility of implementing recommendations from the National Institute of Health and Care Excellence (NICE) osteoarthritis (OA) guidelines in primary care, or of the effect these recommendations have on the condition. The primary aim of this study is to determine the clinical and cost effectiveness of a model OA consultation (MOAC), implementing the core recommendations from the NICE OA guidelines in primary care. Secondary aims are to investigate the impact, feasibility and acceptability of the MOAC intervention; to develop and evaluate a training package for management of OA by general practitioners (GPs) and practice nurses; test the feasibility of deriving 'quality markers' of OA management using a new consultation template and medical record review; and describe the uptake of core NICE OA recommendations in participants aged 45 years and over with joint pain. A mixed methods study with a nested cluster randomised controlled trial. This study was developed according to a defined theoretical framework (the Whole System Informing Self-management Engagement). An overarching model (the Normalisation Process Theory) will be employed to undertake a comprehensive 'whole-system' evaluation of the processes and outcomes of implementing the MOAC intervention. The primary outcome is general physical health (Short Form-12 Physical component score [PCS]) (Ware 1996). The impact, acceptability and feasibility of the MOAC intervention at practice level will be assessed by comparing intervention and control practices using a Quality Indicators template and medical record review. Impact and acceptability of the intervention for patients will be assessed via self-completed outcome measures and semi-structured interviews. The impact, acceptability and feasibility of the MOAC intervention and training for GPs and practice nurses will be evaluated using a variety of methods including questionnaires, semi-structured interviews, and observations. The main output from the study will be to determine whether the MOAC intervention is clinically and cost effective. Additional outputs will be the development of the MOAC for patients consulting with joint pain in primary care, training and educational materials, and resources for patients and professionals regarding supported self-management and uptake of NICE guidance. ISRCTN number: ISRCTN06984617.

Validity, reliability and feasibility of commercially available activity trackers in physical therapy for people with a chronic disease: a study protocol of a mixed methods research.

PubMed

Beekman, Emmylou; Braun, Susy M; Ummels, Darcy; van Vijven, Kim; Moser, Albine; Beurskens, Anna J

2017-01-01

For older people and people with a chronic disease, physical activity provides health benefits. Patients and healthcare professionals can use commercially available activity trackers to objectively monitor (alterations in) activity levels and patterns and to support physical activity. However, insight in the validity, reliability, and feasibility of these trackers in people with a chronic disease is needed. In this article, a study protocol is described in which the validity, reliability (part A), and feasibility from a patient and therapist's point of view (part B) of commercially available activity trackers in daily life and health care is investigated. In part A, a quantitative cross-sectional study, an activity protocol that simulates everyday life activities will be used to determine the validity and reliability of nine commercially available activity trackers. Video recordings will act as the gold standard. In part B, a qualitative participatory action research study will be performed to gain insight in the use of activity trackers in peoples' daily life and therapy settings. Objective feasibility of the activity trackers will be measured with questionnaires, and subjective feasibility (experiences) will be explored in a community of practice. Physical therapists ( n  = 8) will regularly meet during 6 months to learn from each other regarding the actual use of activity trackers in therapy. Therapists and patients ( n  = 48) will decide together which tracker will be used in therapy and for which purpose (e.g., monitoring, goal setting). Data from the therapist' and patients' experiences will be collected by interviews (individual and focus groups) and analyzed by a directed content analysis. At the time of submission, selection of activity trackers, development of the activity protocol, and the ethical approval process are finished. Data collection and data processing are ongoing. The relevance of the study as well as the advantages and disadvantages of several aspects of the chosen design are discussed. The results acquired from both study parts can be used to create decision aids that may assist therapists and people with a chronic disease in choosing a suitable activity tracker, and to facilitate use of these activity trackers in health care settings. Ethical approval has been obtained from two medical-ethical committees (nr. 15-N-109, 15-N-48 and MEC-15-07).

Systems study of fuels from grains and grasses. Quarterly progress report, July--October 1976

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benson, W.; Allen, A.; Athey, R.

1976-11-15

The specific objectives of the project are to determine on a geographic basis the current and potential USA production capability for grain and grass crops, to perform a preliminary screening of conversion processes, and to perform preliminary technical and economic feasibility analyses. The results obtained to date on biomass production, conversion processes, and data management are reported. (JSR)

Conventional Processing of Standard-Size Edge-Glued Blanks for Furniture and Cabinet Parts: a Feasibility Study

Treesearch

Philip A. Araman; Bruce G. Hansen

1983-01-01

Manufacturers of furniture and cabinets use more than 2 billion board feet of hardwood lumber annually. As demand intensifies, we will need to utilize more of the abundant lower grade hardwood resource to assure future supplies at reasonable prices. Conventional processing of standard-size hardwood blanks manufactured from log-run red oak lumber, a resource containing...

Fabrication process scale-up and optimization for a boron-aluminum composite radiator

NASA Technical Reports Server (NTRS)

Okelly, K. P.

1973-01-01

Design approaches to a practical utilization of a boron-aluminum radiator for the space shuttle orbiter are presented. The program includes studies of laboratory composite material processes to determine the feasibility of a structural and functional composite radiator panel, and to estimate the cost of its fabrication. The objective is the incorporation of boron-aluminum modulator radiator on the space shuttle.

Modernizing Selection and Promotion Procedures in the State Employment Security Service Agency.

ERIC Educational Resources Information Center

Derryck, Dennis A.; Leyes, Richard

The purpose of this feasibility study was to discover the types ofselection and promotion models, strategies, and processes that must be employed if current State Employment Security Service Agency selection practices are to be made more directly relevant to the various populations currently being served. Specifically, the study sought to…

Moving from Theory to Practice: Implementing the Kin Keeper[superscript SM] Cancer Prevention Model

ERIC Educational Resources Information Center

Williams, K. P.; Mullan, P. B.; Todem, D.

2009-01-01

This paper presents the rationale and findings of a feasibility and process study of the Kin Keeper[superscript SM] Cancer Prevention Intervention. An observational cohort study design was implemented with African-American women in synergistic female family relationships. Community health workers (CHWs) from two Michigan public health programs…

The Mt. Mitchell scenery assessment

Treesearch

Robert F. Scheele; Gary W. Johnson

1979-01-01

The scenery assessment process for the Mt. Mitchell Suitability/Feasibility Study was conducted by National Park Service personnel and consultants in 1977-78. It combined approaches designed by Lewis (1962) and Jones (1976) in a comparative evaluation of the scenery of two large landscapes in the Appalachian physiographic province. The purpose of this study was to...

The Effect of Subliminal HELP Presentations on Learning a Text Editor.

ERIC Educational Resources Information Center

Wallace, F. Layne; And Others

1991-01-01

Discussion of subliminal stimuli focuses on a study of undergraduates that was conducted to determine the feasibility of presenting subliminal information in a passive manner to reinforce the learning process involved in computer-based text editing. The Texas Instruments microcomputers used in the study are described, and further research is…

40 CFR Appendix A to Subpart L - Criteria for Evaluating a State's Proposed NEPA-Like Process

Code of Federal Regulations, 2012 CFR

2012-07-01

... consider: (1) Designation of a study area comparable to the final system; (2) A range of feasible... conditions; (5) Land use and other social parameters including relevant recreation and open-space..., institutional, and industrial) within the project study area; and (8) Other anticipated public works projects...

40 CFR Appendix A to Subpart L - Criteria for Evaluating a State's Proposed NEPA-Like Process

Code of Federal Regulations, 2010 CFR

2010-07-01

... consider: (1) Designation of a study area comparable to the final system; (2) A range of feasible... conditions; (5) Land use and other social parameters including relevant recreation and open-space..., institutional, and industrial) within the project study area; and (8) Other anticipated public works projects...

40 CFR Appendix A to Subpart L - Criteria for Evaluating a State's Proposed NEPA-Like Process

Code of Federal Regulations, 2011 CFR

2011-07-01

... consider: (1) Designation of a study area comparable to the final system; (2) A range of feasible... conditions; (5) Land use and other social parameters including relevant recreation and open-space..., institutional, and industrial) within the project study area; and (8) Other anticipated public works projects...

Cognitive Enhancement Therapy for Adults with Autism Spectrum Disorder: Results of an 18-Month Feasibility Study

ERIC Educational Resources Information Center

Eack, Shaun M.; Greenwald, Deborah P.; Hogarty, Susan S.; Bahorik, Amber L.; Litschge, Maralee Y.; Mazefsky, Carla A.; Minshew, Nancy J.

2013-01-01

Adults with autism experience significant impairments in social and non-social information processing for which few treatments have been developed. This study conducted an 18-month uncontrolled trial of Cognitive Enhancement Therapy (CET), a comprehensive cognitive rehabilitation intervention, in 14 verbal adults with autism spectrum disorder to…

Facilitating Digital Video Production in the Language Arts Curriculum

ERIC Educational Resources Information Center

McKenney, Susan; Voogt, Joke

2011-01-01

Two studies were conducted to facilitate the development of feasible support for the process of integrating digital video making activities in the primary school language arts curriculum. The first study explored which teaching supports would be necessary to enable primary school children to create digital video as a means of fostering…

TREATMENT OF STORMWATER BY NATURAL ORGANIC MATERIALS

EPA Science Inventory

The overall objective of this study was to evaluate the feasibility of using low-cost natural filter materials for stormwater (SW) treatment. Generic mulch, pine bark mulch, and processed jute were evaluated for metal and organic pollutant removal from actual SW samples collected...

USE OF NATURAL FILTER MEDIA FOR STORMWATER TREATMENT

EPA Science Inventory

The overall objective of this study was to evaluate the feasibility of using low-cost natural filter materials for stormwater (SW) treatment. Generic mulch, pine bark mulch, and processed jute were evaluated for metal and organic pollutant removal from actual SW samples collected...

A randomised controlled feasibility trial of family and social network intervention for young people who misuse alcohol and drugs: study protocol (Y-SBNT).

PubMed

Watson, Judith; Back, Donna; Toner, Paul; Lloyd, Charlie; Day, Ed; Brady, Louca-Mai; Templeton, Lorna; Ambegaokar, Sangeeta; Parrott, Steve; Torgerson, David; Cocks, Kim; Gilvarry, Eilish; McArdle, Paul; Copello, Alex

2015-01-01

A growing body of research has identified family interventions to be effective in treating young people's substance use problems. However, despite this evidence, take-up of family-based approaches in the UK has been low. Key factors for this appear to include the resource-intensive nature of most family interventions which challenges implementation and delivery in many service settings and the cultural adaptation of approaches developed in the USA to a UK setting. This study aims to demonstrate the feasibility of recruiting young people to a specifically developed family- and wider social network-based intervention by testing an adapted version of adult social behaviour and network therapy (SBNT). A pragmatic, randomised controlled, open feasibility trial delivered in two services for young people in the UK. Potential participants are aged 12-18 years referred for drug or alcohol problems to either service. The main purpose of this study is to demonstrate the feasibility of recruiting young people to a specifically developed family and social network-based intervention. The feasibility and acceptability of this intervention will be measured by recruitment rates, treatment retention, follow-up rates and qualitative interviews. The feasibility of training staff from existing services to deliver this intervention will be explored. Using this opportunity to compare the effectiveness of the intervention against treatment as usual, Timeline Follow-Back interviews will document the proportion of days on which the main problem substance was used in the preceding 90-day period at each assessment point. The economic component will examine the feasibility of conducting a full incremental cost-effectiveness analysis of the two treatments. The study will also explore and develop models of patient and public involvement which support the involvement of young people in a study of this nature. An earlier phase of work adapted social behaviour and network therapy (adult approach) to produce a purpose-designed youth version supported by a therapy manual and associated resources. This was achieved by consultation with young people with experience of services and professionals working in services for young people. This feasibility trial alongside ongoing consultations with young people will offer a meaningful understanding of processes of delivery and implementation. ISRCTN93446265; Date ISRCTN assigned 31/05/2013.

Feasibility study of microprocessor systems suitable for use in developing a real-time for the 4.75 GHz scatterometer

NASA Technical Reports Server (NTRS)

1977-01-01

A class of signal processors suitable for the reduction of radar scatterometer data in real time was developed. The systems were applied to the reduction of single polarized 13.3 GHz scatterometer data and provided a real time output of radar scattering coefficient as a function of incident angle. It was proposed that a system for processing of C band radar data be constructed to support scatterometer system currently under development. The establishment of a feasible design approach to the development of this processor system utilizing microprocessor technology was emphasized.

Phosphor thermography technique in hypersonic wind tunnel - Feasibility study

NASA Astrophysics Data System (ADS)

Edy, J. L.; Bouvier, F.; Baumann, P.; Le Sant, Y.

Probative research has been undertaken at ONERA on a new technique of thermography in hypersonic wind tunnels. This method is based on the heat sensitivity of a luminescent coating applied to the model. The luminescent compound, excited by UV light, emits visible light, the properties of which depend on the phosphor temperature, among other factors. Preliminary blowdown wind tunnel tests have been performed, firstly for spot measurements and then for cartographic measurements using a 3-CCD video camera, a BETACAM video recorder and a digital image processing system. The results provide a good indication of the method feasibility.

24 CFR 882.805 - HA application process, ACC execution, and pre-rehabilitation activities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... standards approved by HUD; (B) Conduct a feasibility analysis, and determine whether cost-effective energy... accomplished, the preliminary feasibility of the proposal, and the number of units to be assisted, the Owner...

[Implementation of quality of care indicators for third-level public hospitals in Mexico].

PubMed

Saturno-Hernández, Pedro Jesús; Martínez-Nicolás, Ismael; Poblano-Verástegui, Ofelia; Vértiz-Ramírez, José de Jesús; Suárez-Ortiz, Erasto Cosme; Magaña-Izquierdo, Manuel; Kawa-Karasik, Simón

2017-01-01

To select, pilot test and implement a set of indicators for tertiary public hospitals. Quali-quantitative study in four stages: identification of indicators used internationally; selection and prioritization by utility, feasibility and reliability; exploration of the quality of sources of information in six hospitals; pilot feasibility and reliability, and follow-up measurement. From 143 indicators, 64 were selected and eight were prioritized. The scan revealed sources of information deficient. In the pilot, three indicators were feasible with reliability limited. Has conducted workshops to improve records and sources of information; nine hospitals reported measurements of a quarter. Eight priority indicators could not be measured immediately due to limitations in the data sources for its construction. It is necessary to improve mechanisms of registration and processing of data in this group of hospital.

Feasibility study, software design, layout and simulation of a two-dimensional Fast Fourier Transform machine for use in optical array interferometry

NASA Technical Reports Server (NTRS)

Boriakoff, Valentin

1994-01-01

The goal of this project was the feasibility study of a particular architecture of a digital signal processing machine operating in real time which could do in a pipeline fashion the computation of the fast Fourier transform (FFT) of a time-domain sampled complex digital data stream. The particular architecture makes use of simple identical processors (called inner product processors) in a linear organization called a systolic array. Through computer simulation the new architecture to compute the FFT with systolic arrays was proved to be viable, and computed the FFT correctly and with the predicted particulars of operation. Integrated circuits to compute the operations expected of the vital node of the systolic architecture were proven feasible, and even with a 2 micron VLSI technology can execute the required operations in the required time. Actual construction of the integrated circuits was successful in one variant (fixed point) and unsuccessful in the other (floating point).

An analysis of the feasibility of the copra business in the village of Pendowo Harjo, sub-district of Sungsang, Banyuasin Regency

NASA Astrophysics Data System (ADS)

Purba, Y. Z. W.; Saleh, W.

2018-01-01

Copra is used as raw material of coconut oil and exported commodity. This study was conducted in the Tidal Land of Pendowo Harjo Village, Subdistrict of Sungsang, Banyuasin Regency, which aims to calculate the production costs incurred, the income earned, and to analyze the feasibility of the business of producing copra. In this research, sampling was conducted by simple random sampling method. The number of samples taken in this study was 10 individuals who were the copra business people out of 117 people of population. The results of analysis show that the productioncost incurred is Rp 1,198,076.12, and the income earned is Rp 414,598.88 per unit of the production process. Financially, the value of NPV obtained is Rp 19,668,343.86, the value of the IRR is 60.75 percent and the value of the Net B/C is 1.74. Therefore, economically, the copra business is feasible to be developed.

To What did They Consent? Understanding Consent Among Low Literacy Participants in a Microbicide Feasibility Study in Mazabuka, Zambia.

PubMed

Munalula-Nkandu, Esther; Ndebele, Paul; Siziya, Seter; Munthali, J C

2015-12-01

We conducted a study to review the consenting process in a vaginal microbicide feasibility study conducted in Mazabuka, Zambia. Participants were drawn from those participating in the microbicide study. A questionnaire and focus group discussion were used to collect information on participants' understanding of study aims, risks and benefits. Altogether, 200 participants took part in this study. The results of the study showed that while all participants signed or endorsed their thumbprints to the consent forms, full informed consent was not attained from most of the participants since 77% (n = 154) of the participants had numerous questions about the study and 34% (n = 68) did not know who to get in touch with concerning the study. Study objectives were not fully understood by over 61% of the participants. Sixty four percent of the participants were not sure of the risks of taking part in the microbicide study. A significant number thought the study was all about determining their HIV status. Some participants were concerned that their partners were not on the trial as they were convinced that being on the study meant that that they had a lifetime protection from HIV infection. The process of obtaining consent was inadequate as various phases of the study were not fully understood. We recommend the need for researchers to reinforce the consenting process in all studies and more so when studies are conducted in low literacy populations. © 2014 John Wiley & Sons Ltd.

A feasibility study of municipal solid waste incineration fly ash utilisation in Estonia.

PubMed

Berber, Hakan; Frey, Ruedi; Voronova, Viktoria; Koroljova, Arina

2017-09-01

The purpose of this paper is to discuss the alternative environmental management options for the utilisation of municipal solid waste (MSW) incineration fly ash (FA), which is generated at Iru Power Plant where MSW is incinerated in Estonia. To determine sustainable and economically feasible environmental management options for MSW incineration FA in Estonia, CO 2 sequestration with a further carbonation process was examined. A partial Cost & Benefit Analysis has been conducted to compare the carbonation process to the current situation. Two carbonation options were developed. Option 1 is to use carbonated FA in any other processes based on the waste-to-product principle. Option 2 is to send carbonated FA to the non-hazardous landfill in Tallinn, Estonia. Important parameters, such as Net Present Value (NPV), Internal Rate of Return (IRR), Benefit-Cost Ratio (BCR) and Break Even Point (BEP), have been calculated for carbonation options and the current case. In addition, a sensitivity analysis has been conducted to examine its robustness. The results showed that the best option is carbonation Option 1 with NPV of 9,209,662 EUR, IRR of 43%, BCR of 2.63 and BEP between 2018 and 2019. Both Options 1 and 2 constitute more sustainable and environmentally friendly management options compared to the current situation. It can be concluded that this preliminary feasibility study showed that running a carbonation plant may be profitable and sustainable for Estonia. Currently, there is no treatment technology for MSW incineration FA in Estonia and FA is sent to a neighbouring country for further utilisation. This is the first study to demonstrate FA management options with economic and environmental benefits.

The Feasibility of Bulk Crystallization as an Industrial Purification and Production Technique for Proteins

NASA Technical Reports Server (NTRS)

Judge, Russell A.; Forsythe, Elizabeth L.; Johns, Michael R.; Pusey, Marc L.; White, Edward T.

1998-01-01

Bulk crystallization in stirred vessels is used industrially for the recovery and purification of many inorganic and organic materials. Although much has been written on the crystallization of proteins for X-ray diffraction analysis, very little has been reported on the application of bulk crystallization in stirred vessels. In this study, a 1-liter, seeded, stirred, batch crystallizer was used with ovalbumin as a model protein to test the feasibility of this crystallization method as a recovery and purification process for proteins. Results were obtained for ovalbumin solubility, nucleation thresholds, crystal breakage and crystal growth kinetics in bulk solution under a range of operating conditions of pH and ammonium sulphate concentration (Judge et al., 1996). Experiments were also performed to determine the degree of purification that can be achieved by the crystallization of ovalbumin from a mixture of proteins. The effect of the presence of these proteins upon the ovalbumin crystal growth kinetics was also investigated (Judge et al., 1995). All of these aspects are essential for the design of bulk crystallization processes which have not previously been reported for proteins. Results from a second study that investigated the effect of structurally different proteins on the solubility, crystal growth rates and crystal purity of chicken egg white lysozyme are also presented (Judge et al., 1997). In this case face growth rates were measured using lysozyme purified by liquid chromatography and the effect of the addition of specific protein impurities were observed on the (110) and (101) crystal faces. In these two studies the results are presented to show the feasibility and purifying ability of crystallization as a production process for proteins.

Method and apparatus for automated assembly

DOEpatents

Jones, Rondall E.; Wilson, Randall H.; Calton, Terri L.

1999-01-01

A process and apparatus generates a sequence of steps for assembly or disassembly of a mechanical system. Each step in the sequence is geometrically feasible, i.e., the part motions required are physically possible. Each step in the sequence is also constraint feasible, i.e., the step satisfies user-definable constraints. Constraints allow process and other such limitations, not usually represented in models of the completed mechanical system, to affect the sequence.

A feasible process for furfural production from the pre-hydrolysis liquor of corncob via biochar catalysts in a new biphasic system.

PubMed

Deng, Aojie; Lin, Qixuan; Yan, Yuhuan; Li, Huiling; Ren, Junli; Liu, Chuanfu; Sun, Runcang

2016-09-01

A feasible approach was developed to produce furfural from the pre-hydrolysis liquor of corncob via biochar catalysts as the solid acid catalyst in a new biphasic system with dichloromethane (DCM) as the organic phase and the concentrated pre-hydrolysis liquor (CPHL) containing NaCl as the aqueous phase. The biochar catalyst possessing many acidity groups (SO3H, COOH and phenolic OH groups) was prepared by the carbonization and sulfonation process of the corncob hydrolyzed residue. The influence of the catalytic condition on furfural yield and selectivity was comparatively studied. It was found that 81.14% furfural yield and 83.0% furfural selectivity were obtained from CPHL containing 5wt% xylose using this biochar catalyst in the CPHL-NaCl/DCM biphasic system at 170°C for 60min. In addition, with the regeneration process, this catalyst displayed the high performance and excellent recyclability. Copyright © 2016 Elsevier Ltd. All rights reserved.

The feasibility study of crude palm oil transesterification at 30 °C operation.

PubMed

Sim, Jia Huey; Kamaruddin, Azlina Harun; Bhatia, Subhash

2010-12-01

The objective of this research is to investigate the potential of transesterification of crude palm oil (CPO) to biodiesel at 30 degrees C. The mass transfer limitations problem crucial at 30 degrees C due to the viscosity of CPO has been addressed. The process parameters that are closely related to mass transfer effects like enzyme loading, agitation speed and reaction time were optimized. An optimum methanol to oil substrate molar ratio at 6.5:1 was observed and maintained throughout the experiments. The optimum operating condition for the transesterification process was found at 6.67 wt% of enzyme loading and at 150 rpm of agitation speed. The corresponding initial reaction and FAME yield obtained at 6 h were 89.29% FAME yield/hr and 85.01%, respectively. The 85% FAME yield obtained at 30 degrees C operation of CPO transesterification shows that the process is potentially feasible for the biodiesel synthesis. 2010 Elsevier Ltd. All rights reserved.

Treatment of silica effluents: ultrafiltration or coagulation-decantation.

PubMed

Ndiaye, P I; Moulin, P; Dominguez, L; Millet, J C; Charbit, F

2004-12-10

In the electronics industry, the preparation of silicon plates generates effluents that contain a great amount of colloidal silica. Two processes--decantation and ultrafiltration--are studied with in view the treatment of the effluents released by the firm Rockwood Electronic Materials. The feasibility of each of the two processes is studied separately and their operating parameters optimized. Both processes allow the recovery of a great proportion of the initial effluent (over 89%) as transparent and colorless water that can be reused at the start of a line. In view of the results and of the compared advantages and disadvantages of the two processes, ultrafiltration will be selected for the industrial unit.

Atrial Fibrillation Screening in Nonmetropolitan Areas Using a Telehealth Surveillance System With an Embedded Cloud-Computing Algorithm: Prospective Pilot Study

PubMed Central

Chen, Ying-Hsien; Hung, Chi-Sheng; Huang, Ching-Chang; Hung, Yu-Chien

2017-01-01

Background Atrial fibrillation (AF) is a common form of arrhythmia that is associated with increased risk of stroke and mortality. Detecting AF before the first complication occurs is a recognized priority. No previous studies have examined the feasibility of undertaking AF screening using a telehealth surveillance system with an embedded cloud-computing algorithm; we address this issue in this study. Objective The objective of this study was to evaluate the feasibility of AF screening in nonmetropolitan areas using a telehealth surveillance system with an embedded cloud-computing algorithm. Methods We conducted a prospective AF screening study in a nonmetropolitan area using a single-lead electrocardiogram (ECG) recorder. All ECG measurements were reviewed on the telehealth surveillance system and interpreted by the cloud-computing algorithm and a cardiologist. The process of AF screening was evaluated with a satisfaction questionnaire. Results Between March 11, 2016 and August 31, 2016, 967 ECGs were recorded from 922 residents in nonmetropolitan areas. A total of 22 (2.4%, 22/922) residents with AF were identified by the physician’s ECG interpretation, and only 0.2% (2/967) of ECGs contained significant artifacts. The novel cloud-computing algorithm for AF detection had a sensitivity of 95.5% (95% CI 77.2%-99.9%) and specificity of 97.7% (95% CI 96.5%-98.5%). The overall satisfaction score for the process of AF screening was 92.1%. Conclusions AF screening in nonmetropolitan areas using a telehealth surveillance system with an embedded cloud-computing algorithm is feasible. PMID:28951384

Manufacturing methods of a composite cell case for a Ni-Cd battery

NASA Technical Reports Server (NTRS)

Bauer, J. L.; Bogner, R. S.; Lowe, E. P.; Orlowski, E.

1979-01-01

Graphite epoxy material for a nickel cadmium battery cell case has been evaluated and determined to perform in the simulated environment of the battery. The basic manufacturing method requires refinement to demonstrate production feasibility. The various facets of production scale-up, i.e., process and tooling development together with material and process control, have been integrated into a comprehensive manufacturing process that assures production reproducibility and product uniformity. Test results substantiate that a battery cell case produced from graphite epoxy pre-impregnated material utilizing internal pressure bag fabrication method is feasible.

Synthesis: Intertwining product and process

NASA Technical Reports Server (NTRS)

Weiss, David M.

1990-01-01

Synthesis is a proposed systematic process for rapidly creating different members of a program family. Family members are described by variations in their requirements. Requirements variations are mapped to variations on a standard design to generate production quality code and documentation. The approach is made feasible by using principles underlying design for change. Synthesis incorporates ideas from rapid prototyping, application generators, and domain analysis. The goals of Synthesis and the Synthesis process are discussed. The technology needed and the feasibility of the approach are also briefly discussed. The status of current efforts to implement Synthesis methodologies is presented.

Tailor making high performance graphite fiber reinforced PMR polyimides

NASA Technical Reports Server (NTRS)

Serafini, T. T.; Vannucci, R. D.

1974-01-01

Studies performed to demonstrate the feasibility of using the polymerization of monomer reactants (PMR) approach to tailor make processable polyimide matrix resins are described. Monomeric reactant solutions containing the dimethyl ester of 3,3',4,4' -benzophenonetetracarboxylic acid, 4, 4' -methylenedianiline and the monomethyl ester of 5-norbornene-2, 3-dicarboxylic acid were used to impregnate Hercules HTS graphite fiber. Six different monomeric reactant stoichiometries were studied. The processing characteristics and elevated temperature mechanical properties of the PMR polyimide/HTS graphite fiber composites are described.

Feasibility of a randomized controlled trial to evaluate the impact of decision boxes on shared decision-making processes.

PubMed

Giguere, Anik Mc; Labrecque, Michel; Légaré, France; Grad, Roland; Cauchon, Michel; Greenway, Matthew; Haynes, R Brian; Pluye, Pierre; Syed, Iqra; Banerjee, Debi; Carmichael, Pierre-Hugues; Martin, Mélanie

2015-02-25

Decision boxes (DBoxes) are two-page evidence summaries to prepare clinicians for shared decision making (SDM). We sought to assess the feasibility of a clustered Randomized Controlled Trial (RCT) to evaluate their impact. A convenience sample of clinicians (nurses, physicians and residents) from six primary healthcare clinics who received eight DBoxes and rated their interest in the topic and satisfaction. After consultations, their patients rated their involvement in decision-making processes (SDM-Q-9 instrument). We measured clinic and clinician recruitment rates, questionnaire completion rates, patient eligibility rates, and estimated the RCT needed sample size. Among the 20 family medicine clinics invited to participate in this study, four agreed to participate, giving an overall recruitment rate of 20%. Of 148 clinicians invited to the study, 93 participated (63%). Clinicians rated an interest in the topics ranging 6.4-8.2 out of 10 (with 10 highest) and a satisfaction with DBoxes of 4 or 5 out of 5 (with 5 highest) for 81% DBoxes. For the future RCT, we estimated that a sample size of 320 patients would allow detecting a 9% mean difference in the SDM-Q-9 ratings between our two arms (0.02 ICC; 0.05 significance level; 80% power). Clinicians' recruitment and questionnaire completion rates support the feasibility of the planned RCT. The level of interest of participants for the DBox topics, and their level of satisfaction with the Dboxes demonstrate the acceptability of the intervention. Processes to recruit clinics and patients should be optimized.

Modifying Alcohol Consumption to Reduce Obesity: A Randomized Controlled Feasibility Study of a Complex Community-based Intervention for Men.

PubMed

Irvine, Linda; Crombie, Iain K; Cunningham, Kathryn B; Williams, Brian; Sniehotta, Falko F; Norrie, John; Melson, Ambrose J; Jones, Claire; Rice, Peter; Slane, Peter W; Achison, Marcus; McKenzie, Andrew; Dimova, Elena D; Allan, Sheila

2017-11-01

Being obese and drinking more than 14 units of alcohol per week places men at very high risk of developing liver disease. This study assessed the feasibility of a trial to reduce alcohol consumption. It tested the recruitment strategy, engagement with the intervention, retention and study acceptability. Men aged 35-64 years who drank >21 units of alcohol per week and had a BMI > 30 were recruited by two methods: from GP patient registers and by community outreach. The intervention was delivered by a face to face session followed by a series of text messages. Trained lay people (Study Coordinators) delivered the face to face session. Participants were followed up for 5 months from baseline to measure weekly alcohol consumption and BMI. The recruitment target of 60 was exceeded, with 69 men recruited and randomized. At baseline, almost all the participants (95%) exceeded the threshold for a 19-fold increase in the risk of dying from liver disease. The intervention was delivered with high fidelity. A very high follow-up rate was achieved (98%) and the outcomes for the full trial were measured. Process evaluation showed that participants responded as intended to key steps in the behaviour change strategy. The acceptability of the study methods was high: e.g. 80% of men would recommend the study to others. This feasibility study identified a group at high risk of liver disease. It showed that a full trial could be conducted to test the effectiveness and cost-effectiveness of the intervention. Current controlled trials: ISRCTN55309164. National Institute for Health Research Health Technology Assessment (NIHR HTA). This feasibility study recruited 69 men at high risk of developing liver disease. The novel intervention, to reduce alcohol consumption through the motivation of weight loss, was well received. A very high follow-up rate was achieved. Process evaluation showed that participants engaged with key components of the behaviour change strategy. © The Author 2017. Medical Council on Alcohol and Oxford University Press.

Randomised controlled pilot study to investigate the effectiveness of thoracic epidural and paravertebral blockade in reducing chronic post-thoracotomy pain: TOPIC feasibility study protocol.

PubMed

Yeung, Joyce; Melody, Teresa; Kerr, Amy; Naidu, Babu; Middleton, Lee; Tryposkiadis, Kostas; Daniels, Jane; Gao, Fang

2016-12-01

Open chest surgery (thoracotomy) is considered the most painful of surgical procedures. Forceful wound retraction, costochondral dislocation, posterior costovertebral ligament disruption, intercostal nerve trauma and wound movement during respiration combine to produce an acute, severe postoperative pain insult and persistent chronic pain many months after surgery is common. Three recent systematic reviews conclude that unilateral continuous paravertebral blockade (PVB) provides analgesia at least equivalent to thoracic epidural blockade (TEB) in the postoperative period, has a lower failure rate, and symptom relief that lasted months. Crucially, PVB may reduce the development of subsequent chronic pain by intercostal nerve protection or decreased nociceptive input. The overall aim is to determine in patients who undergo thoracotomy whether perioperative PVB results in reducing chronic post-thoracotomy pain (CPTP) compared with TEB. This pilot study will evaluate feasibility of a substantive trial. TOPIC is a randomised controlled trial comparing the effectiveness of TEB and PVB in reducing CPTP. This is a pilot study to evaluate feasibility of a substantive trial and study processes in 2 adult thoracic centres, Heart of England NHS Foundation Trust (HEFT) and University Hospital of South Manchester NHS Foundation Trust (UHSM). The primary objective is to establish the number of patients randomised as a proportion of those eligible. Secondary objectives include evaluation of study processes. Analyses of feasibility and patient-reported outcomes will primarily take the form of simple descriptive statistics and where appropriate, point estimates of effects sizes and associated 95% CIs. The study has obtained ethical approval from NHS Research Ethics Committee (REC number 14/EM/1280). Dissemination plan includes: informing patients and health professionals; engaging multidisciplinary professionals to support a proposal of a definitive trial and submission for a full HTA application dependent on the success of the study. ISRCTN45041624; Pre-results. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Child and adolescent musculoskeletal pain (CAM-Pain) feasibility study: testing a method of identifying, recruiting and collecting data from children and adolescents who consult about a musculoskeletal condition in UK general practice.

PubMed

Michaleff, Zoe A; Campbell, Paul; Hay, Alastair D; Warburton, Louise; Dunn, Kate M

2018-06-14

Test a method of identifying, recruiting and collecting data from children and adolescents who consult their general practitioner about a musculoskeletal condition. Prospective cohort feasibility study. 13 general practices in West Midlands of England. Patients aged 8-19 years who consult their general practice about a musculoskeletal condition. Patients were identified via a relevant musculoskeletal Read code entered at the point of consultation. Feasibility was assessed in terms of study processes (recruitment rates), data collection procedures (duration, response variability), resource utilisation (mail-outs) and ethical considerations (acceptability). From October 2016 to February 2017, an eligible musculoskeletal Read code was entered on 343 occasions, 202 patients were excluded (declined, n=153; screened not suitable, n=49) at the point of consultation. The remaining 141 patients were mailed an invitation to participate (41.1%); 46 patients responded to the invitation (response rate: 32.6%), of which 27 patients consented (consent rate: 19.1%). Participants mean age was 13.7 years (SD 2.7) and current pain intensity was 2.8 (SD 2.7). All participants completed the 6-week follow-up questionnaire. All participants found the interview questions to be acceptable and would consider participating in a similar study in the future. The majority of general practitioners/nurse practitioners, and all of the research nurses reported to be adequately informed about the study and found the study processes acceptable. The expected number of participants were identified and invited, but consent rate was low (<20%) indicating that this method is not feasible (eg, for use in a large prospective study). Recruiting children and adolescents with musculoskeletal conditions in a primary care setting currently presents a challenge for researchers. Further work is needed to identify alternative ways to conduct studies in this population in order to address the current knowledge gap in this field. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Modifying Alcohol Consumption to Reduce Obesity: A Randomized Controlled Feasibility Study of a Complex Community-based Intervention for Men

PubMed Central

Irvine, Linda; Crombie, Iain K; Cunningham, Kathryn B; Williams, Brian; Sniehotta, Falko F; Norrie, John; Melson, Ambrose J; Jones, Claire; Rice, Peter; Slane, Peter W; Achison, Marcus; McKenzie, Andrew; Dimova, Elena D; Allan, Sheila

2017-01-01

Abstract Objectives Being obese and drinking more than 14 units of alcohol per week places men at very high risk of developing liver disease. This study assessed the feasibility of a trial to reduce alcohol consumption. It tested the recruitment strategy, engagement with the intervention, retention and study acceptability. Methods Men aged 35–64 years who drank >21 units of alcohol per week and had a BMI > 30 were recruited by two methods: from GP patient registers and by community outreach. The intervention was delivered by a face to face session followed by a series of text messages. Trained lay people (Study Coordinators) delivered the face to face session. Participants were followed up for 5 months from baseline to measure weekly alcohol consumption and BMI. Results The recruitment target of 60 was exceeded, with 69 men recruited and randomized. At baseline, almost all the participants (95%) exceeded the threshold for a 19-fold increase in the risk of dying from liver disease. The intervention was delivered with high fidelity. A very high follow-up rate was achieved (98%) and the outcomes for the full trial were measured. Process evaluation showed that participants responded as intended to key steps in the behaviour change strategy. The acceptability of the study methods was high: e.g. 80% of men would recommend the study to others. Conclusions This feasibility study identified a group at high risk of liver disease. It showed that a full trial could be conducted to test the effectiveness and cost-effectiveness of the intervention. Trial registration Current controlled trials: ISRCTN55309164. Trial funding National Institute for Health Research Health Technology Assessment (NIHR HTA). Short summary This feasibility study recruited 69 men at high risk of developing liver disease. The novel intervention, to reduce alcohol consumption through the motivation of weight loss, was well received. A very high follow-up rate was achieved. Process evaluation showed that participants engaged with key components of the behaviour change strategy. PMID:29016701

7 CFR 4279.150 - Feasibility studies.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 15 2011-01-01 2011-01-01 false Feasibility studies. 4279.150 Section 4279.150... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited to...

7 CFR 4279.150 - Feasibility studies.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Feasibility studies. 4279.150 Section 4279.150... § 4279.150 Feasibility studies. A feasibility study by a qualified independent consultant may be required... affect the borrower's operations. An acceptable feasibility study should include, but not be limited to...

30 CFR 582.23 - Testing Plan.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OPERATIONS IN THE OUTER... detailed Mining Plan than is obtainable under an approved Delineation Plan, to prepare feasibility studies, to carry out a pilot program to evaluate processing techniques or technology or mining equipment, or...

30 CFR 582.23 - Testing Plan.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OPERATIONS IN THE OUTER... detailed Mining Plan than is obtainable under an approved Delineation Plan, to prepare feasibility studies, to carry out a pilot program to evaluate processing techniques or technology or mining equipment, or...

30 CFR 582.23 - Testing Plan.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OPERATIONS IN THE OUTER... detailed Mining Plan than is obtainable under an approved Delineation Plan, to prepare feasibility studies, to carry out a pilot program to evaluate processing techniques or technology or mining equipment, or...

NDMA Treatability Studies.

DTIC Science & Technology

1976-12-01

This investigation evaluated the feasibility of destruction of NDMA using the wet air oxidation process. From the limited data evaluated, it was...determined that NDMA was amenable to destruction by wet air oxidation to approximately the 1.0 mg/l level with relative ease. Reduction below the 1.0 mg

Feasibility Studies of Surveillance, Communication, and Data Processing Subsystems for Advanced Air Traffic Management

DOT National Transportation Integrated Search

1972-11-01

Analyses are made of waveforms, parameters, codes, error rates, and multi-access noise for proposed communications and surveillance subsystems to be useful for air traffic control in the 1990-2000 time period. The systems represented in these analyse...

78 FR 22551 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-16

... is needed for the design, implementation, and evaluation of public health programs. New mobile... could make smartphones ideal for the ongoing research, surveillance, and evaluation of risk behaviors... feasibility study to evaluate the process of conducting Web surveys by smartphone [[Page 22552

Techno-economical study of biogas production improved by steam explosion pretreatment.

PubMed

Shafiei, Marzieh; Kabir, Maryam M; Zilouei, Hamid; Sárvári Horváth, Ilona; Karimi, Keikhosro

2013-11-01

Economic feasibility of steam explosion pretreatment for improvement of biogas production from wheat straw and paper tube residuals was investigated. The process was simulated by Aspen plus ®, and the economical feasibility of five different plant capacities was studied by Aspen Process Economic Analyzer. Total project investment of a plant using paper tube residuals or wheat straw was 63.9 or 61.8 million Euros, respectively. The manufacturing cost of raw biogas for these two feedstocks was calculated to 0.36 or 0.48 €/m(3) of methane, respectively. Applying steam explosion pretreatment resulted in 13% higher total capital investment while significantly improved the economy of the biogas plant and decreased the manufacturing cost of methane by 36%. The sensitivity analysis showed that 5% improvement in the methane yield and 20% decrease in the raw material price resulted in 5.5% and 8% decrease in the manufacturing cost of methane, respectively. Copyright © 2013 Elsevier Ltd. All rights reserved.

AMTD - Advanced Mirror Technology Development in Mechanical Stability

NASA Technical Reports Server (NTRS)

Knight, J. Brent

2015-01-01

Analytical tools and processes are being developed at NASA Marshal Space Flight Center in support of the Advanced Mirror Technology Development (AMTD) project. One facet of optical performance is mechanical stability with respect to structural dynamics. Pertinent parameters are: (1) the spacecraft structural design, (2) the mechanical disturbances on-board the spacecraft (sources of vibratory/transient motion such as reaction wheels), (3) the vibration isolation systems (invariably required to meet future science needs), and (4) the dynamic characteristics of the optical system itself. With stability requirements of future large aperture space telescopes being in the lower Pico meter regime, it is paramount that all sources of mechanical excitation be considered in both feasibility studies and detailed analyses. The primary objective of this paper is to lay out a path to perform feasibility studies of future large aperture space telescope projects which require extreme stability. To get to that end, a high level overview of a structural dynamic analysis process to assess an integrated spacecraft and optical system is included.

Feasibility of an implementation strategy for the integration of health promotion in routine primary care: a quantitative process evaluation.

PubMed

Sanchez, Alvaro; Grandes, Gonzalo; Cortada, Josep M; Pombo, Haizea; Martinez, Catalina; Corrales, Mary Helen; de la Peña, Enrique; Mugica, Justo; Gorostiza, Esther

2017-02-17

Process evaluation is recommended to improve the understanding of underlying mechanisms related to clinicians, patients, context and intervention delivery that may impact on trial or program results, feasibility and transferability to practice. The aim of this study was to assess the feasibility of the Prescribe Healthy Life (PVS from the Spanish "Prescribe Vida Saludable") implementation strategy for enhancing the adoption and implementation of an evidence-based health promotion intervention in primary health care. A descriptive study of 2-year implementation indicators for the PVS clinical intervention was conducted in four primary health care centers. A multifaceted collaborative modeling implementation strategy was developed to enhance the integration of a clinical intervention to promote healthy lifestyles into clinical practice. Process indicators were assessed for intervention reach, adoption, implementation, sustainability and their variability at center, practice, and patient levels. Mean rates of adoption by means of active collaboration among the three main professional categories (family physicians, nurses and administrative personnel) were 75% in all centers. Just over half of the patients that attended (n = 11650; 51.9%) were reached in terms of having their lifestyle habits assessed, while more than a third (33.7%; n = 7433) and almost 10% (n = 2175) received advice or a printed prescription for at least one lifestyle change, respectively. Only 3.7% of the target population received a repeat prescription. These process indicators significantly (p < 0.001) varied by center, lifestyle habit and patient characteristics. Sustainability of intervention components changed thorough the implementation period within centers. The implementation strategy used showed moderate-to-good performance on process indicators related to adoption, reach, and implementation of the evidence-based healthy lifestyle promotion intervention in the context of routine primary care. Sources of heterogeneity and instability in these indicators may improve our understanding of factors required to attain adequate program adoption and implementation through improved implementation strategies.

Penrose-Hameroff orchestrated objective-reduction proposal for human consciousness is not biologically feasible.

PubMed

McKemmish, Laura K; Reimers, Jeffrey R; McKenzie, Ross H; Mark, Alan E; Hush, Noel S

2009-08-01

Penrose and Hameroff have argued that the conventional models of a brain function based on neural networks alone cannot account for human consciousness, claiming that quantum-computation elements are also required. Specifically, in their Orchestrated Objective Reduction (Orch OR) model [R. Penrose and S. R. Hameroff, J. Conscious. Stud. 2, 99 (1995)], it is postulated that microtubules act as quantum processing units, with individual tubulin dimers forming the computational elements. This model requires that the tubulin is able to switch between alternative conformational states in a coherent manner, and that this process be rapid on the physiological time scale. Here, the biological feasibility of the Orch OR proposal is examined in light of recent experimental studies on microtubule assembly and dynamics. It is shown that the tubulins do not possess essential properties required for the Orch OR proposal, as originally proposed, to hold. Further, we consider also recent progress in the understanding of the long-lived coherent motions in biological systems, a feature critical to Orch OR, and show that no reformation of the proposal based on known physical paradigms could lead to quantum computing within microtubules. Hence, the Orch OR model is not a feasible explanation of the origin of consciousness.

Evaluation of a complex intervention to improve activities of daily living of disabled cancer patients: protocol for a randomised controlled study and feasibility of recruitment and intervention

PubMed Central

2014-01-01

Background Many cancer patients have problems performing activities of daily living (ADL). A randomised controlled trial was designed to examine the effects of an ADL intervention in addition to standard treatment and care in a hospital setting. The objective of this article was to present the study and to analyse the feasibility of the recruitment process and the intervention. Methods Adult disabled cancer patients at Næstved Hospital in Denmark were enrolled between 1 March 2010 and 30 June 2011 and randomised into an ADL intervention or to a control group. The intervention was performed by occupational therapists. The feasibility of the recruitment was analysed with regard to success in achieving the estimated number of participants and identification of barriers, and feasibility of the intervention was based on calculations of patient attendance and patient acceptability. The primary outcome of the randomised controlled trial was patients’ health-related quality of life 2 and 8 weeks after baseline. Results A total of 118 disabled cancer patients were enrolled in the study over a time span of 16 months. Very few meetings between occupational therapist and patient were cancelled. Time spent on the intervention varied considerably, but for the majority of patients, time consumption was between 1–3 hours. Conclusions Despite difficulties with recruitment, participation was considered feasible and the intervention was accepted among patients. Missing data in the follow-up period were mostly due to death among participants. Very few participants declined to complete questionnaires during follow-up. PMID:24779438

Development and feasibility testing of decision support for patients who are candidates for a prophylactic implantable defibrillator: a study protocol for a pilot randomized controlled trial

PubMed Central

2013-01-01

Background Patients, identified to be at risk for but who have never experienced a potentially lethal cardiac arrhythmia, have the option of receiving an implantable cardioverter defibrillator (ICD) as prophylaxis against sudden cardiac death - a primary prevention indication. In Canada, there is no clear framework to support patients’ decision-making for these devices. Decision support, using a decision aid, could moderate treatment-related uncertainty and prepare patients to make well-informed decisions. Patient decision aids provide information on treatment options, risks, and benefits, to help patients clarify their values for outcomes of treatment options. The objectives of this research are: 1) develop a decision aid, 2) evaluate the decision aid, and 3) determine the feasibility of conducting a trial. Methods/design A development panel comprised of the core investigative team, health service researchers, decision science experts, cardiovascular healthcare practitioners, and ICD patient representatives will collaborate to provide input on the content and format of the aid. To generate probabilities to include in the aid, we will synthesize primary prevention ICD evidence. To obtain anonymous input about the facts and content, we will employ a modified Delphi process. To evaluate the draft decision aid will invite ICD patients and their families (n = 30) to rate its acceptability. After we evaluate the aid, to determine the feasibility, we will conduct a feasibility pilot randomized controlled trial (RCT) in new ICD candidates (n = 80). Participants will be randomized to receive a decision aid prior to specialist consultation versus usual care. Results from the pilot RCT will determine the feasibility of research processes; inform sample size calculation, measure decision quality (knowledge, values, decision conflict) and the influence of health related quality of life on decision-making. Discussion Our study seeks to develop a decision aid, for patients offered their first ICD for prophylaxis against sudden cardiac death. This paper outlines the background and methods of a pilot randomized trial which will inform a larger multicenter trial. Ultimately, decision support prior to specialist consultation could enhance the decision-making process between patients, physicians, and families, associated with life-prolonging medical devices like the ICD. Trial registration ClinicalTrials.gov: NCT01876173 PMID:24148851

Development and feasibility testing of decision support for patients who are candidates for a prophylactic implantable defibrillator: a study protocol for a pilot randomized controlled trial.

PubMed

Carroll, Sandra L; McGillion, Michael; Stacey, Dawn; Healey, Jeff S; Browne, Gina; Arthur, Heather M; Thabane, Lehana

2013-10-22

Patients, identified to be at risk for but who have never experienced a potentially lethal cardiac arrhythmia, have the option of receiving an implantable cardioverter defibrillator (ICD) as prophylaxis against sudden cardiac death - a primary prevention indication. In Canada, there is no clear framework to support patients' decision-making for these devices. Decision support, using a decision aid, could moderate treatment-related uncertainty and prepare patients to make well-informed decisions. Patient decision aids provide information on treatment options, risks, and benefits, to help patients clarify their values for outcomes of treatment options. The objectives of this research are: 1) develop a decision aid, 2) evaluate the decision aid, and 3) determine the feasibility of conducting a trial. A development panel comprised of the core investigative team, health service researchers, decision science experts, cardiovascular healthcare practitioners, and ICD patient representatives will collaborate to provide input on the content and format of the aid. To generate probabilities to include in the aid, we will synthesize primary prevention ICD evidence. To obtain anonymous input about the facts and content, we will employ a modified Delphi process. To evaluate the draft decision aid will invite ICD patients and their families (n = 30) to rate its acceptability. After we evaluate the aid, to determine the feasibility, we will conduct a feasibility pilot randomized controlled trial (RCT) in new ICD candidates (n = 80). Participants will be randomized to receive a decision aid prior to specialist consultation versus usual care. Results from the pilot RCT will determine the feasibility of research processes; inform sample size calculation, measure decision quality (knowledge, values, decision conflict) and the influence of health related quality of life on decision-making. Our study seeks to develop a decision aid, for patients offered their first ICD for prophylaxis against sudden cardiac death. This paper outlines the background and methods of a pilot randomized trial which will inform a larger multicenter trial. Ultimately, decision support prior to specialist consultation could enhance the decision-making process between patients, physicians, and families, associated with life-prolonging medical devices like the ICD. ClinicalTrials.gov: NCT01876173.

A coupled Bio-EF process for mineralization of the pharmaceuticals furosemide and ranitidine: Feasibility assessment.

PubMed

Olvera-Vargas, Hugo; Oturan, Nihal; Buisson, Didier; Oturan, Mehmet A

2016-07-01

A coupled Bio-EF treatment has been applied as a reliable process for the degradation of the pharmaceuticals furosemide (FRSM) and ranitidine (RNTD) in aqueous medium, in order to reduce the high energy consumption related to electrochemical technology. In the first stage of this study, electrochemical degradation of the drugs was assessed by the electro-Fenton process (EF) using a BDD/carbon-felt cell. Biodegradability of the drugs solutions was enhanced reaching BOD5/COD ratios close to the biodegradability threshold of 0.4, evidencing the formation of bio-compatible by-products (mainly short-chain carboxylic acids) which are suitable for biological post-treatment. Moreover, toxicity evaluation by the Microtox(®) method revealed that EF pre-treatment was able of detoxifying both, FRSM and RNTD solutions, constituting another indicator of biodegradability of EF treated solutions. In the second stage, electrolyzed solutions were treated by means of an aerobic biological process. A significant part of the short-chain carboxylic acids formed during the electrochemical phase was satisfactorily removed by the used selected microorganisms. The results obtained demonstrate the efficiency and feasibility of the integrated Bio-EF process. Copyright © 2016 Elsevier Ltd. All rights reserved.

Feasibility Study of Cyclic Pressure Testing Thick-Walled Cylinders

DTIC Science & Technology

1975-01-01

Watervliet, and also • for tests on Navy barrela, is the hydrostatic pressure cycling test. This test employs a cloae-fitting, high -strength steel...mandrel to keep water volume at a minimum. High preaaure pumps then cycle the water up to the desired teat pres- • sure, thirty to fifty thousand...be accomplished using s high energy metalworking process - electrohydraulice. m • Electrohydraulica is a metalworking process which employs the

Feasibility of reclaimed asphalt pavement as aggregate in portland cement concrete pavements.

DOT National Transportation Integrated Search

2013-11-01

This research effort was focused on evaluating the feasibility of using minimally processed reclaimed : asphalt pavement (RAP) as aggregate replacement in concrete pavements. This research demonstrated : that concretes with up to 50 percent of the fi...

Establishment of the roadmap for chlorination process development for zirconium recovery and recycle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Collins, E.D.; Del Cul, G.D.; Spencer, B.B.

Process development studies are being conducted to recover, purify, and reuse the zirconium (about 98.5% by mass) in used nuclear fuel (UNF) zirconium alloy cladding. Feasibility studies began in FY 2010 using empty cladding hulls that were left after fuel dissolution or after oxidation to a finely divided oxide powder (voloxidation). In FY 2012, two industrial teams (AREVA and Shaw-Westinghouse) were contracted by the Department of Energy Office of Nuclear Energy (NE) to provide technical assistance to the project. In FY 2013, the NE Fuel Cycle Research and Development Program requested development of a technology development roadmap to guide futuremore » work. The first step in the roadmap development was to assess the starting point, that is, the current state of the technology and the end goal. Based on previous test results, future work is to be focused on first using chlorine as the chlorinating agent and secondly on the use of a process design that utilizes a chlorination reactor and dual ZrCl{sub 4} product salt condensers. The likely need for a secondary purification step was recognized. Completion of feasibility testing required an experiment on the chemical decladding flowsheet option. This was done during April 2013. The roadmap for process development will continue through process chemistry optimization studies, the chlorinated reactor design configuration, product salt condensers, and the off-gas trapping of tritium or other volatile fission products from the off-gas stream. (authors)« less

[Studies on the extraction process of total saponins from Paris polyphylla Smith].

PubMed

Sun, Zhi-Guo; Zhang, Lin; Li, Ling-Jun; Tian, Jing-Kui

2007-06-01

To optimize the extraction process of total saopnins from Paris polyphylla Smith. The single factor test and orthogonal experiment were used to determine the optimum extraction process. The optimum extraction process was obtained as follows: the plant materials were extracted with 70% ethanol twice, respectively with 10BV for 2 hours and then with 8BV the solvents for 1.5 hours. The yield of total saponins could be up to 4.24% and the total extraction rate of Paris polyphylla I and Paris polyphylla II was 93.28%. The optimum process obtained is steady, reasonable and feasible.

Data on conceptual design of cryogenic energy storage system combined with liquefied natural gas regasification process.

PubMed

Lee, Inkyu; Park, Jinwoo; Moon, Il

2017-12-01

This paper describes data of an integrated process, cryogenic energy storage system combined with liquefied natural gas (LNG) regasification process. The data in this paper is associated with the article entitled "Conceptual Design and Exergy Analysis of Combined Cryogenic Energy Storage and LNG Regasification Processes: Cold and Power Integration" (Lee et al., 2017) [1]. The data includes the sensitivity case study dataset of the air flow rate and the heat exchanging feasibility data by composite curves. The data is expected to be helpful to the cryogenic energy process development.

A Process Evaluation of Project Developmental Continuity. Interim Report VI: Executive Summary. Recommendations for Continuing the Impact Study.

ERIC Educational Resources Information Center

Granville, Arthur C.; Love, John M.

This brief report summarizes the analysis and conclusions presented in detail in Interim Report VI regarding the feasibility of conducting a longitudinal study of Project Developmental Continuity (PDC). This project is a Head Start demonstration program aimed at providing educational and developmental continuity between children's Head Start and…

Object motion analysis study

NASA Technical Reports Server (NTRS)

1974-01-01

The use of optical data processing (ODP) techniques for motion analysis in two-dimensional imagery was studied. The basic feasibility of this approach was demonstrated, but inconsistent performance of the photoplastic used for recording spatial filters prevented totally automatic operation. Promising solutions to the problems encountered are discussed, and it is concluded that ODP techniques could be quite useful for motion analysis.

Extraction of Dynamic Features from Hand Drawn Data for the Identification of Children with Handwriting Difficulty

ERIC Educational Resources Information Center

Khalid, Puspa Inayat; Yunus, Jasmy; Adnan, Robiah

2010-01-01

Studies have shown that differences between children with and without handwriting difficulties lie not only in the written product (static data) but also in dynamic data of handwriting process. Since writing system varies among countries and individuals, this study was conducted to determine the feasibility of using quantitative outcome measures…

Research and Practice on College English Oral Test--A Case Study of Beijing Institute of Petrochemical Technology

ERIC Educational Resources Information Center

Yan, Jiaolan; Zhang, Weiran; Yu, Yuan; Chang, Jie; Ding, Guangwei

2015-01-01

Based on the description of implementation of College English oral test from the points of the necessity, feasibility, and implementation process, this study analyzed the current situation of university students' oral English, oral English ability, the college entrance examination results, and a band-4 written test and established their…

Pilot Testing for Feasibility in a Study of Student Retention and Attrition in Online Undergraduate Programs

ERIC Educational Resources Information Center

Fraser, Joy; Fahlman, Dorothy; Arscott, Jane; Guillot, Isabelle

2018-01-01

Prior to undertaking a descriptive study on attrition and retention of students in two online undergraduate health administration and human service programs, a pilot test was conducted to assess the procedures for participant recruitment, usability of the survey questionnaire, and data collection processes. A retention model provided the…

43 CFR 404.47 - How will a feasibility study be conducted under this program?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 1 2011-10-01 2011-10-01 false How will a feasibility study be conducted... Studies § 404.47 How will a feasibility study be conducted under this program? Feasibility studies will be... feasibility study, including the Principles and Guidelines (incorporated by reference at § 404.4). You can...

Conceptual process design and techno-economic assessment of ex situ catalytic fast pyrolysis of biomass: A fixed bed reactor implementation scenario for future feasibility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dutta, Abhijit; Schaidle, Joshua A.; Humbird, David

Ex situ catalytic fast pyrolysis of biomass is a promising route for the production of fungible liquid biofuels. There is significant ongoing research on the design and development of catalysts for this process. However, there are a limited number of studies investigating process configurations and their effects on biorefinery economics. Herein we present a conceptual process design with techno-economic assessment; it includes the production of upgraded bio-oil via fixed bed ex situ catalytic fast pyrolysis followed by final hydroprocessing to hydrocarbon fuel blendstocks. This study builds upon previous work using fluidized bed systems, as detailed in a recent design reportmore » led by the National Renewable Energy Laboratory (NREL/TP-5100-62455); overall yields are assumed to be similar, and are based on enabling future feasibility. Assuming similar yields provides a basis for easy comparison and for studying the impacts of areas of focus in this study, namely, fixed bed reactor configurations and their catalyst development requirements, and the impacts of an inline hot gas filter. A comparison with the fluidized bed system shows that there is potential for higher capital costs and lower catalyst costs in the fixed bed system, leading to comparable overall costs. The key catalyst requirement is to enable the effective transformation of highly oxygenated biomass into hydrocarbons products with properties suitable for blending into current fuels. Potential catalyst materials are discussed, along with their suitability for deoxygenation, hydrogenation and C–C coupling chemistry. This chemistry is necessary during pyrolysis vapor upgrading for improved bio-oil quality, which enables efficient downstream hydroprocessing; C–C coupling helps increase the proportion of diesel/jet fuel range product. One potential benefit of fixed bed upgrading over fluidized bed upgrading is catalyst flexibility, providing greater control over chemistry and product composition. Since this study is based on future projections, the impacts of uncertainties in the underlying assumptions are quantified via sensitivity analysis. As a result, this analysis indicates that catalyst researchers should prioritize by: carbon efficiency > catalyst cost > catalyst lifetime, after initially testing for basic operational feasibility.« less

Conceptual process design and techno-economic assessment of ex situ catalytic fast pyrolysis of biomass: A fixed bed reactor implementation scenario for future feasibility

DOE PAGES

Dutta, Abhijit; Schaidle, Joshua A.; Humbird, David; ...

2015-10-06

Ex situ catalytic fast pyrolysis of biomass is a promising route for the production of fungible liquid biofuels. There is significant ongoing research on the design and development of catalysts for this process. However, there are a limited number of studies investigating process configurations and their effects on biorefinery economics. Herein we present a conceptual process design with techno-economic assessment; it includes the production of upgraded bio-oil via fixed bed ex situ catalytic fast pyrolysis followed by final hydroprocessing to hydrocarbon fuel blendstocks. This study builds upon previous work using fluidized bed systems, as detailed in a recent design reportmore » led by the National Renewable Energy Laboratory (NREL/TP-5100-62455); overall yields are assumed to be similar, and are based on enabling future feasibility. Assuming similar yields provides a basis for easy comparison and for studying the impacts of areas of focus in this study, namely, fixed bed reactor configurations and their catalyst development requirements, and the impacts of an inline hot gas filter. A comparison with the fluidized bed system shows that there is potential for higher capital costs and lower catalyst costs in the fixed bed system, leading to comparable overall costs. The key catalyst requirement is to enable the effective transformation of highly oxygenated biomass into hydrocarbons products with properties suitable for blending into current fuels. Potential catalyst materials are discussed, along with their suitability for deoxygenation, hydrogenation and C–C coupling chemistry. This chemistry is necessary during pyrolysis vapor upgrading for improved bio-oil quality, which enables efficient downstream hydroprocessing; C–C coupling helps increase the proportion of diesel/jet fuel range product. One potential benefit of fixed bed upgrading over fluidized bed upgrading is catalyst flexibility, providing greater control over chemistry and product composition. Since this study is based on future projections, the impacts of uncertainties in the underlying assumptions are quantified via sensitivity analysis. As a result, this analysis indicates that catalyst researchers should prioritize by: carbon efficiency > catalyst cost > catalyst lifetime, after initially testing for basic operational feasibility.« less

Review of Orbital Propellant Transfer Techniques and the Feasibility of a Thermal Bootstrap Propellant Transfer Concepts

NASA Technical Reports Server (NTRS)

Yoshikawa, H. H.; Madison, I. B.

1971-01-01

This study was performed in support of the NASA Task B-2 Study Plan for Space Basing. The nature of space-based operations implies that orbital transfer of propellant is a prime consideration. The intent of this report is (1) to report on the findings and recommendations of existing literature on space-based propellant transfer techniques, and (2) to determine possible alternatives to the recommended methods. The reviewed literature recommends, in general, the use of conventional liquid transfer techniques (i.e., pumping) in conjunction with an artificially induced gravitational field. An alternate concept that was studied, the Thermal Bootstrap Transfer Process, is based on the compression of a two-phase fluid with subsequent condensation to a liquid (vapor compression/condensation). This concept utilizes the intrinsic energy capacities of the tanks and propellant by exploiting temperature differentials and available energy differences. The results indicate the thermodynamic feasibility of the Thermal Bootstrap Transfer Process for a specific range of tank sizes, temperatures, fill-factors and receiver tank heat transfer coefficients.

Cultural adaptation of a pediatric functional assessment for rehabilitation outcomes research.

PubMed

Arestad, Kristen E; MacPhee, David; Lim, Chun Y; Khetani, Mary A

2017-09-15

Significant racial and ethnic health care disparities experienced by Hispanic children with special health care needs (CSHCN) create barriers to enacting culturally competent rehabilitation services. One way to minimize the impact of disparities in rehabilitation is to equip practitioners with culturally relevant functional assessments to accurately determine service needs. Current approaches to culturally adapting assessments have three major limitations: use of inconsistent translation processes; current processes assess for some, but not all, elements of cultural equivalence; and limited evidence to guide decision making about whether to undertake cultural adaptation with and without language translation. The aims of this observational study are (a) to examine similarities and differences of culturally adapting a pediatric functional assessment with and without language translation, and (b) to examine the feasibility of cultural adaptation processes. The Young Children's Participation and Environment Measure (YC-PEM), a pediatric functional assessment, underwent cultural adaptation (i.e., language translation and cognitive testing) to establish Spanish and English pilot versions for use by caregivers of young CSHCN of Mexican descent. Following language translation to develop a Spanish YC-PEM pilot version, 7 caregivers (4 Spanish-speaking; 3 English-speaking) completed cognitive testing to inform decisions regarding content revisions to English and Spanish YC-PEM versions. Participant responses were content coded to established cultural equivalencies. Coded data were summed to draw comparisons on the number of revisions needed to achieve cultural equivalence between the two versions. Feasibility was assessed according to process data and data quality. Results suggest more revisions are required to achieve cultural equivalence for the translated (Spanish) version of the YC-PEM. However, issues around how the participation outcome is conceptualized were identified in both versions. Feasibility results indicate that language translation processes require high resource investment, but may increase translation quality. However, use of questionnaires versus interview methods for cognitive testing may have limited data saturation. Results lend preliminary support to the need for and feasibility of cultural adaptation with and without language translation. Results inform decisions surrounding cultural adaptations with and without language translation and thereby enhance cultural competence and quality assessment of healthcare need within pediatric rehabilitation.

Low cost solar array project: Cell and module formation research area. Process research of non-CZ silicon material

NASA Technical Reports Server (NTRS)

1983-01-01

Meniscus coates tests, back junction formation using a new boron containing liquid, tests of various SiO2 and boron containing liquids, pelletized silicon for replenishment during web growth, and ion implantation compatibility/feasibility study are discussed.

Using Multiattribute Utility Theory as a Priority-Setting Tool in Human Services Planning.

ERIC Educational Resources Information Center

Camasso, Michael J.; Dick, Janet

1993-01-01

The feasibility of applying multiattribute utility theory to the needs assessment and priority-setting activities of human services planning councils was studied in Essex County (New Jersey). Decision-making and information filtering processes are explored in the context of community planning. (SLD)

Integration of New Technology in Army Libraries. Appendices.

ERIC Educational Resources Information Center

DAMANS and Associates, Rockville, MD.

Eight appendices provide information related to a study which was conducted to determine the feasibility of introducing new automatic techniques to Army library technical processing activities; to examine and recommend appropriate systems and configurations for library automation; and to determine costs of implementing the recommendations. The…

IODIDE AEROSOL SORBENTS FOR MERCURY CAPTURE IN COMBUSTION EXHAUSTS

EPA Science Inventory

Several sorbent processes are being studied for their feasibility for mercury capture. Mercury is different from the other heavy metals as it is not as chemically reactive (due to a filled outer electronic shell), thus making it difficult for sorbents to chemically trap it (a). ...

New Kent County and Hanover County Road Orders, 1706-1743 : transcribed from the vestry book of St. Paul's Parish.

DOT National Transportation Integrated Search

2004-01-01

The road history projects undertaken by the Virginia Transportation Research Council establish the feasibility of studies of early road networks and their use in the environmental review process. These projects, by gathering and publishing the early ...

Technical/commercial feasibility study of the production of fuel-grade ethanol from corn: 100-million-gallon-per-year production facility in Myrtle Grove, Louisiana

NASA Astrophysics Data System (ADS)

1982-05-01

The technical and economic feasibility of producing motor fuel alcohol from corn in a 100 million gallon per year plant to be constructed in Myrtle Grove, Louisiana is evaluated. The evaluation includes a detailed process design using proven technology, a capital cost estimate for the plant, a detailed analysis of the annual operating cost, a market study, a socioeconomic, environmental, health and safety analysis, and a complete financial analysis. Several other considerations for production of ethanol were evaluated including: cogeneration and fuel to be used in firing the boilers; single by-products vs. multiple by-products; and use of boiler flue gas for by-product drying.

7 CFR 1737.70 - Description of feasibility study

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 11 2011-01-01 2011-01-01 false Description of feasibility study 1737.70 Section 1737... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study (a) In connection with each loan RUS shall prepare a feasibility study that includes sections on consolidated loan...

7 CFR 1737.70 - Description of feasibility study

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Description of feasibility study 1737.70 Section 1737... TELECOMMUNICATIONS LOANS Feasibility Determination Procedures § 1737.70 Description of feasibility study (a) In connection with each loan RUS shall prepare a feasibility study that includes sections on consolidated loan...

Feasibility study report for the Imperial Valley Ethanol Refinery: a 14. 9-million-gallon-per-year ethanol synfuel refinery utilizing geothermal energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-03-01

The construction and operation of a 14,980,000 gallon per year fuel ethanol from grain refinery in the Imperial Valley of California is proposed. The Imperial Valley Ethanol Refinery (refinery) will use hot geothermal fluid from geothermal resources at the East Mesa area as the source of process energy. In order to evaluate the economic viability of the proposed Project, exhaustive engineering, cost analysis, and financial studies have been undertaken. This report presents the results of feasibility studies undertaken in geothermal resource, engineering, marketing financing, management, environment, and permits and approvals. The conclusion of these studies is that the Project ismore » economically viable. US Alcohol Fuels is proceeding with its plans to construct and operate the Refinery.« less

Kids SIP smartER: A Feasibility Study to Reduce Sugar-Sweetened Beverage Consumption Among Middle School Youth in Central Appalachia.

PubMed

Lane, Hannah; Porter, Kathleen J; Hecht, Erin; Harris, Priscilla; Kraak, Vivica; Zoellner, Jamie

2017-01-01

To test the feasibility of Kids SIP smartER, a school-based intervention to reduce consumption of sugar-sweetened beverages (SSBs). Matched-contact randomized crossover study with mixed-methods analysis. One middle school in rural, Appalachian Virginia. Seventy-four sixth and seventh graders (5 classrooms) received Kids SIP smartER in random order over 2 intervention periods. Feasibility outcomes were assessed among 2 teachers. Kids SIP smartER consisted of 6 lessons grounded in the Theory of Planned Behavior, media literacy, and public health literacy and aimed to improve individual SSB behaviors and understanding of media literacy and prevalent regional disparities. The matched-contact intervention promoted physical activity. Beverage Intake Questionnaire-15 (SSB consumption), validated theory questionnaires, feasibility questionnaires (student and teacher), student focus groups, teacher interviews, and process data (eg, attendance). Repeated measures analysis of variances across 3 time points, descriptive statistics, and deductive analysis of qualitative data. During the first intervention period, students receiving Kids SIP smartER (n = 43) significantly reduced SSBs by 11 ounces/day ( P = .01) and improved media ( P < .001) and public health literacy ( P < .01) understanding; however, only media literacy showed between-group differences ( P < .01). Students and teachers found Kids SIP smartER acceptable, in-demand, practical, and implementable within existing resources. Kids SIP smartER is feasible in an underresourced, rural school setting. Results will inform further development and large-scale testing of Kids SIP smartER to reduce SSBs among rural adolescents.

Reach Out Churches: A Community-Based Participatory Research Pilot Trial to Assess the Feasibility of a Mobile Health Technology Intervention to Reduce Blood Pressure Among African Americans.

PubMed

Skolarus, Lesli E; Cowdery, Joan; Dome, Mackenzie; Bailey, Sarah; Baek, Jonggyu; Byrd, James Brian; Hartley, Sarah E; Valley, Staci C; Saberi, Sima; Wheeler, Natalie C; McDermott, Mollie; Hughes, Rebecca; Shanmugasundaram, Krithika; Morgenstern, Lewis B; Brown, Devin L

2017-06-01

Innovative strategies are needed to reduce the hypertension epidemic among African Americans. Reach Out was a faith-collaborative, mobile health, randomized, pilot intervention trial of four mobile health components to reduce high blood pressure (BP) compared to usual care. It was designed and tested within a community-based participatory research framework among African Americans recruited and randomized from churches in Flint, Michigan. The purpose of this pilot study was to assess the feasibility of the Reach Out processes. Feasibility was assessed by willingness to consent (acceptance of randomization), proportion of weeks participants texted their BP readings (intervention use), number lost to follow-up (retention), and responses to postintervention surveys and focus groups (acceptance of intervention). Of the 425 church members who underwent BP screening, 94 enrolled in the study and 73 (78%) completed the 6-month outcome assessment. Median age was 58 years, and 79% were women. Participants responded with their BPs on an average of 13.7 (SD = 10.7) weeks out of 26 weeks that the BP prompts were sent. All participants reported satisfaction with the intervention. Reach Out, a faith-collaborative, mobile health intervention was feasible. Further study of the efficacy of the intervention and additional mobile health strategies should be considered.

Feasibility of a Modified Chloramine Process for the Production of UDMH and MMH

DTIC Science & Technology

1978-08-31

that phase is provided in this report . Amine Fuels Production Feasibility Demonstration, MCR -75-466, Final Report and Addendurn I - Data Book, Martin ...Final Report , Martin Marietta Corporation, Denver (February 1976) Contract F04701-74-C-0039. Amine Fuels Production Feasibility Demonstration, MCF-75...466, CDRL A305, Volume I, Final Report ; Volume II Economic Analyses; and Volume III, Data Book; Martin Marietta Corporation, Denver (October 1976

Reusing effluent of flue gas desulfurization wastewater treatment process as an economical calcium source for phosphorus removal.

PubMed

Dou, Weixiao; Zhou, Zhen; Ye, Jiongjiong; Huang, Rongwei; Jiang, Lu-Man; Chen, Guofeng; Fei, Xiaoyun

2017-09-01

Flue gas desulfurization (FGD) wastewater treatment by conventional neutralization, chemical precipitation and coagulation process removes most suspended solids and heavy metals, and provides an effluent rich in calcium, alkalinity and chloride, which obstructs its reclamation and reuse but is in favor of phosphorus (P) precipitation. The goals of this study were to investigate feasibility of reusing FGD effluent as a calcium source for P removal from P-rich wastewater. Results revealed that increasing the volumetric ratio between FGD effluent and P-rich wastewater achieved higher pH value and Ca/P ratio, and thus enhanced P removal efficiency to 94.3% at the ratio of 40%. X-ray diffraction and scanning electron microscope analysis of harvested precipitates showed that increasing pH from 8 to 10 induced the conversion of hydroxyapatite to tri-calcium phosphate, and then to whitlockite. This study demonstrated that for reusing FGD effluent for P removal was highly feasible, both technically and economically. This process not only saves the cost of precipitants for P removal, but also provides an economical alternative for current zero liquid discharge technology for FGD wastewater, which requires high energy consumption and capital costs.

Theoretical and Experimental Investigations of the Potential of Osmotic Energy for Power Production †

PubMed Central

Sharif, Adel O.; Merdaw, Ali A.; Aryafar, Maryam; Nicoll, Peter

2014-01-01

This paper presents a study on the potential of osmotic energy for power production. The study includes both pilot plant testing and theoretical modelling as well as cost estimation. A projected cost of £30/MWh of clean electricity could be achieved by using a Hydro-Osmotic Power (HOP) plant if a suitable membrane is used and the osmotic potential difference between the two solutions is greater than 25 bar; a condition that can be readily found in many sites around the world. Results have shown that the membrane system accounts for 50%–80% of the HOP plant cost depending on the salinity difference level. Thus, further development in membrane technology and identifying suitable membranes would have a significant impact on the feasibility of the process and the route to market. As the membrane permeability determines the HOP process feasibility, this paper also describes the effect of the interaction between the fluid and the membrane on the system permeability. It has been shown that both the fluid physical properties as well as the membrane micro-structural parameters need to be considered if further development of the HOP process is to be achieved. PMID:25110959

Theoretical and experimental investigations of the potential of osmotic energy for power production.

PubMed

Sharif, Adel O; Merdaw, Ali A; Aryafar, Maryam; Nicoll, Peter

2014-08-08

This paper presents a study on the potential of osmotic energy for power production. The study includes both pilot plant testing and theoretical modelling as well as cost estimation. A projected cost of £30/MWh of clean electricity could be achieved by using a Hydro-Osmotic Power (HOP) plant if a suitable membrane is used and the osmotic potential difference between the two solutions is greater than 25 bar; a condition that can be readily found in many sites around the world. Results have shown that the membrane system accounts for 50%-80% of the HOP plant cost depending on the salinity difference level. Thus, further development in membrane technology and identifying suitable membranes would have a significant impact on the feasibility of the process and the route to market. As the membrane permeability determines the HOP process feasibility, this paper also describes the effect of the interaction between the fluid and the membrane on the system permeability. It has been shown that both the fluid physical properties as well as the membrane micro-structural parameters need to be considered if further development of the HOP process is to be achieved.

Technical and economic feasibility of alternative fuel use in process heaters and small boilers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-02-01

The technical and economic feasibility of using alternate fuels - fuels other than oil and natural gas - in combustors not regulated by the Powerplant and Industrial Fuel Use Act of 1978 (FUA) was evaluated. FUA requires coal or alternate fuel use in most large new boilers and in some existing boilers. Section 747 of FUA authorizes a study of the potential for reduced oil and gas use in combustors not subject to the act: small industrial boilers with capacities less than 100 MMBtu/hr, and process heat applications. Alternative fuel use in combustors not regulated by FUA was examined andmore » the impact of several measures to encourage the substitution of alternative fuels in these combustors was analyzed. The primary processes in which significant fuel savings can be achieved are identified. Since feedstock uses of oil and natural gas are considered raw materials, not fuels, feedstock applications are not examined in this analysis. The combustors evaluated in this study comprise approximately 45% of the fuel demand projected in 1990. These uses would account for more than 3.5 million barrels per day equivalent fuel demand in 1990.« less

Hybrid cardiac imaging with MR-CAT scan: a feasibility study.

PubMed

Hillenbrand, C; Sandstede, J; Pabst, T; Hahn, D; Haase, A; Jakob, P M

2000-06-01

We demonstrate the feasibility of a new versatile hybrid imaging concept, the combined acquisition technique (CAT), for cardiac imaging. The cardiac CAT approach, which combines new methodology with existing technology, essentially integrates fast low-angle shot (FLASH) and echoplanar imaging (EPI) modules in a sequential fashion, whereby each acquisition module is employed with independently optimized imaging parameters. One important CAT sequence optimization feature is the ability to use different bandwidths for different acquisition modules. Twelve healthy subjects were imaged using three cardiac CAT acquisition strategies: a) CAT was used to reduce breath-hold duration times while maintaining constant spatial resolution; b) CAT was used to increase spatial resolution in a given breath-hold time; and c) single-heart beat CAT imaging was performed. The results obtained demonstrate the feasibility of cardiac imaging using the CAT approach and the potential of this technique to accelerate the imaging process with almost conserved image quality. Copyright 2000 Wiley-Liss, Inc.

An environmental friendly animal waste disposal process with ammonia recovery and energy production: Experimental study and economic analysis.

PubMed

Shen, Ye; Tan, Michelle Ting Ting; Chong, Clive; Xiao, Wende; Wang, Chi-Hwa

2017-10-01

Animal manure waste is considered as an environmental challenge especially in farming areas mainly because of gaseous emission and water pollution. Among all the pollutants emitted from manure waste, ammonia is of greatest concern as it could contribute to formation of aerosols in the air and could hardly be controlled by traditional disposal methods like landfill or composting. On the other hand, manure waste is also a renewable source for energy production. In this work, an environmental friendly animal waste disposal process with combined ammonia recovery and energy production was proposed and investigated both experimentally and economically. Lab-scale feasibility study results showed that 70% of ammonia in the manure waste could be converted to struvite as fertilizer, while solid manure waste was successfully gasified in a 10kW downdraft fixed-bed gasifier producing syngas with the higher heating value of 4.9MJ/(Nm 3 ). Based on experimental results, economic study for the system was carried out using a cost-benefit analysis to investigate the financial feasibility based on a Singapore case study. In addition, for comparison, schemes of gasification without ammonia removal and incineration were also studied for manure waste disposal. The results showed that the proposed gasification-based manure waste treatment process integrated with ammonia recovery was most financially viable. Copyright © 2017 Elsevier Ltd. All rights reserved.

Anaerobic ammonia removal in presence of organic matter: a novel route.

PubMed

Sabumon, P C

2007-10-01

This study describes the feasibility of anaerobic ammonia removal process in presence of organic matter. Different sources of biomass collected from diverse eco-systems containing ammonia and organic matter (OM) were screened for potential anaerobic ammonia removal. Sequential batch studies confirmed the possibility of anaerobic ammonia removal in presence of OM, but ammonia was oxidized anoxically to nitrate (at oxidation reduction potential; ORP=-248+/-25 mV) by an unknown mechanism unlike in the reported anammox process. The oxygen required for oxidation of ammonia might have been generated through catalase enzymatic activity of facultative anaerobes in mixed culture. The oxygen generation possibility by catalase enzyme route was demonstrated. Among the inorganic electron acceptors (NO(2)(-), NO(3)(-) and SO(4)(2-)) studied, NO(2)(-) was found to be most effective in total nitrogen removal. Denitrification by the developed culture was much effective and faster compared to ammonia oxidation. The results of this study show that anaerobic ammonia removal is feasible in presence of OM. The novel nitrogen removal route is hypothesized as enzymatic anoxic oxidation of NH(4)(+) to NO(3)(-), followed by denitrification via autotrophic and/or heterotrophic routes. The results of batch study were confirmed in continuous reactor operation.

Materials processing in space

NASA Technical Reports Server (NTRS)

1975-01-01

The feasibility and possible advantages of processing materials in a nongravitational field are considered. Areas of investigation include biomedical applications, the processing of inorganic materials, and flight programs and funding.

Diet and physical activity intervention in colorectal cancer survivors: a feasibility study.

PubMed

Grimmett, Chloe; Simon, Alice; Lawson, Victoria; Wardle, Jane

2015-02-01

Evidence that lifestyle factors are associated with better outcomes in colorectal cancer (CRC) survivors highlights the need for behaviour change interventions. This study examined feasibility and acceptability, and provided an indication of behavioural impact, of a telephone-based, multimodal health behaviour intervention for CRC survivors. Participants were recruited from five London hospitals. Patients (n = 29) who had recently completed treatment for CRC participated in a 12 week intervention. Behavioural goals were to increase physical activity (PA) and fruit and vegetable (F&V) intake, and reduce consumption of red/processed meat and alcohol. Self-report measures of PA and diet were completed in all patients, supplemented by objective measures in a sub-set. Uptake of the study when patients were approached by a researcher was high (72%), compared with 27% contacted by letter. Methods for identifying eligible patients were not optimal. Study completion rate was high (79%), and completers evaluated the intervention favourably. Significant improvements were observed in objectively-measured activity (+70 min/week; p = .004). Gains were seen in diet: +3 F&V portions a day (p < .001), -147 g of red meat a week (p = .013), -0.83 portions of processed meat a week (p = .002). Changes in serum vitamin levels were not statistically significant, but the small sample size provides limited power. Clinically meaningful improvement in quality of life (p < .001) was observed. An intervention combining print materials and telephone consultations was feasible and acceptable, and associated with improvements in PA, diet and quality of life. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Feasibility Study Analysis of Establishing Archery Sports Special Place

NASA Astrophysics Data System (ADS)

Tarigan, U. P. P.; Mardhatillah, A.; Budiman, I.; Sembiring, A. C.; Ramadhan, M. S.

2018-04-01

This study essentially discusses the basic concepts related to the decision and process of selecting a sports archery business project in order to provide economic and social benefits over time. Archery sports is a sport that requires special skills, both accuracy, coordination mental training and improves the physical condition of the prime. In Medan, it's still a bit of practice archery, but many people love this sport. From the data collected, there are three locations where archery in the city of the field of the Sunggal Knights is located at Jl Tunggul Hitam no.1A, Kec. Medan Sunggal, Avros Educational Park Aval address at Avros Street No.60 Medan, and the Knights of Johor Archery Club which is located at Jl. The work of Darma Gg. Ujung Family, Medan Johor. Therefore a feasibility study was undertaken in establishing an archery sports place in the field. The aspects to be considered in making feasibility studies are market and marketing aspects, technical and equipment aspects, management aspects, legal aspects, economic and social aspects, and financial aspects. Financial analysis using own capital got Payback Period 3 years 5,8 months, Net Present Value Rp 11.684.026 and obtained Internal Rate of Return of 17%.

Remedial Action Assessment System (RAAS): A computer-based methodology for conducting feasibility studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buelt, J.L.; Stottlemyre, J.A.; White, M.K.

1991-09-01

Because of the great complexity and number of potential waste sites facing the US Department of Energy (DOE) for potential cleanup, the DOE is supporting the development of a computer-based methodology to streamline the remedial investigations/feasibility study process required for DOE operable units. DOE operable units are generally more complex in nature because of the existence of multiple waste sites within many of the operable units and the presence of mixed radioactive and hazardous chemical wastes. Consequently, Pacific Northwest Laboratory (PNL) is developing the Remedial Action Assessment System (RAAS), which is aimed at screening, linking, and evaluating establishment technology processmore » options in support of conducting feasibility studies under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). It is also intended to do the same in support of corrective measures studies requires by the Resource Conservation and Recovery Act (RCRA). This paper presents the characteristics of two RAAS prototypes currently being developed. These include the RAAS Technology Information System, which accesses information on technologies in a graphical and tabular manner, and the main RAAS methodology, which screens, links, and evaluates remedial technologies. 4 refs., 3 figs., 1 tab.« less

Remedial Action Assessment System (RAAS): A computer-based methodology for conducting feasibility studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buelt, J.L.; Stottlemyre, J.A.; White, M.K.

1991-02-01

Because of the great complexity and number of potential waste sites facing the US Department of Energy (DOE) for potential cleanup, the DOE is supporting the development of a computer-based methodology to streamline the remedial investigation/feasibility study process required for DOE operable units. DOE operable units are generally more complex in nature because of the existence of multiple waste sites within many of the operable units and the presence of mixed radioactive and hazardous chemical wastes. Consequently, Pacific Northwest Laboratory (PNL) is developing the Remedial Action Assessment System (RAAS), which is aimed at screening, linking, and evaluating established technology processmore » options in support of conducting feasibility studies under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). It is also intended to do the same in support of corrective measures studies required by the Resource Conservation and Recovery Act (RCRA). This paper presents the characteristics of two RAAS prototypes currently being developed. These include the RAAS Technology Information System, which accesses information on technologies in a graphical and tabular manner, and the main RAAS methodology, which screens, links, and evaluates remedial technologies. 4 refs., 3 figs., 1 tab.« less

Stakeholders' perceptions of rehabilitation services for individuals living with disability: a survey study.

PubMed

Darzi, Andrea J; Officer, Alana; Abualghaib, Ola; Akl, Elie A

2016-01-08

The World Health Organization (WHO) was tasked with developing health system guidelines for the implementation of rehabilitation services. Stakeholders' perceptions are an essential factor to take into account in the guideline development process. The aim of this study was to assess stakeholders' perceived feasibility and acceptability of eighteen rehabilitation services and the values they attach to ten rehabilitation outcomes. We disseminated an online self-administered questionnaire through a number of international and regional organizations from the different WHO regions. Eligible individuals included persons with disability, caregivers of persons with disability, health professionals, administrators and policy makers. The answer options consisted of a 9-point Likert scale. Two hundred fifty three stakeholders participated. The majority of participants were health professional (64 %). In terms of outcomes, 'Increasing access' and 'Optimizing utilization' were the top service outcomes rated as critical (i.e., 7, 8 or 9 on the Likert scale) by >70 % of respondents. 'Fewer hospital admissions', 'Decreased burden of care' and 'Increasing longevity' were the services rated as least critical (57 %, 63 % and 58 % respectively). In terms of services, 'Community based rehabilitation' and 'Home based rehabilitation' were found to be both definitely feasible and acceptable (75 % and 74 % respectively). 'Integrated and decentralized rehabilitation services' was found to be less feasible than acceptable according to stakeholders (61 % and 71 % respectively). As for 'Task shifting', most stakeholders did not appear to find task shifting as either definitely feasible or definitely acceptable (63 % and 64 % respectively). The majority of stakeholder's perceived 'Increasing access' and 'Optimizing utilization' as most critical amongst rehabilitation outcomes. The feasibility of the 'Integrated and decentralized rehabilitation services' was perceived to be less than their acceptability. The majority of stakeholders found 'Task shifting' as neither feasible nor acceptable.

Acceptability and Feasibility of a Shared Decision-Making Model in Work Rehabilitation: A Mixed-Methods Study of Stakeholders' Perspectives.

PubMed

Coutu, Marie-France; Légaré, France; Durand, Marie-José; Stacey, Dawn; Labrecque, Marie-Elise; Corbière, Marc; Bainbridge, Lesley

2018-04-16

Purpose To establish the acceptability and feasibility of implementing a shared decision-making (SDM) model in work rehabilitation. Methods We used a sequential mixed-methods design with diverse stakeholder groups (representatives of private and public employers, insurers, and unions, as well as workers having participated in a work rehabilitation program). First, a survey using a self-administered questionnaire enabled stakeholders to rate their level of agreement with the model's acceptability and feasibility and propose modifications, if necessary. Second, eight focus groups representing key stakeholders (n = 34) and four one-on-one interviews with workers were conducted, based on the questionnaire results. For each stakeholder group, we computed the percentage of agreement with the model's acceptability and feasibility and performed thematic analyses of the transcripts. Results Less than 50% of each stakeholder group initially agreed with the overall acceptability and feasibility of the model. Stakeholders proposed 37 modifications to the objectives, 17 to the activities, and 39 to improve the model's feasibility. Based on in-depth analysis of the transcripts, indicators were added to one objective, an interview guide was added as proposed by insurers to ensure compliance of the SDM process with insurance contract requirements, and one objective was reformulated. Conclusion Despite initially low agreement with the model's acceptability on the survey, subsequent discussions led to three minor changes and contributed to the model's ultimate acceptability and feasibility. Later steps will involve assessing the extent of implementation of the model in real rehabilitation settings to see if other modifications are necessary before assessing its impact.

Preliminary Feasibility Study of Benzo(a)Pyrene Oxidative Degradation by Fenton Treatment

PubMed Central

Homem, Vera; Dias, Zélia; Santos, Lúcia; Alves, Arminda

2009-01-01

Polycyclic aromatic hydrocarbons (PAHs) are considered priority compounds due to their toxic and carcinogenic nature. The concern about water contamination and the consequent human exposure has encouraged the development of new methods for PAHs removal. The purpose of this work was to study the feasibility of a degradation process of benzo(a)pyrene (BaP) in aqueous matrices by oxidation with Fenton reagent. A laboratory unit was designed to optimize the factors which may influence the process: pH (3.5 to 6.0), temperature (30 to 70°C), H2O2 (20 to 150 mg L−1), Fe2+ concentration (2.75 to 5.50 mg L−1), and the initial concentration of the pollutant (10 to 100 μg L−1). The pH did not influence significantly the results in the range studied. An increase in temperature from 30 to 70°C improved the removal efficiency from 90% to 100%. The same effect was observed for ferrous ion concentrations from 2.75 to 5.50 mg L−1 (increase from 78% to 100% removal). The H2O2 concentration played a double role during the process: from 20 to 50 mg L−1 an increase in the removal efficiency was achieved, but for higher concentrations (>50 mg L−1) the degradation is lower. This study proved that the degradation of benzo(a)pyrene by Fenton's reagent is a viable process. PMID:19936125

An educational game for teaching clinical practice guidelines to Internal Medicine residents: development, feasibility and acceptability

PubMed Central

Akl, Elie A; Mustafa, Reem; Slomka, Thomas; Alawneh, Alia; Vedavalli, Abhishek; Schünemann, Holger J

2008-01-01

Background Adherence to Clinical Practice Guidelines (CPGs) remains suboptimal among internal medicine trainees. Educational games are of growing interest and have the potential to improve adherence to CPGs. The objectives of this study were to develop an educational game to teach CPGs in Internal Medicine residency programs and to evaluate its feasibility and acceptability. Methods We developed the Guide-O-Game© in the format of a TV game show with questions based on recommendations of CPGs. The development of the Guide-O-Game© consisted of the creation of a multimedia interactive tool, the development of recommendation-based questions, and the definition of the game's rules. We evaluated its feasibility through pilot testing and its acceptability through a qualitative process. Results The multimedia interactive tool uses a Macromedia Flash web application and consists of a manager interface and a user interface. The user interface allows the choice of two game styles. We created so far 16 sets of questions relating to 9 CPGs. The pilot testing proved that the game was feasible. The qualitative evaluation showed that residents considered the game to be acceptable. Conclusion We developed an educational game to teach CPGs to Internal Medicine residents that is both feasible and acceptable. Future work should evaluate its impact on educational outcomes. PMID:19017400

Die Starter: A New System to Manage Early Feasibility in Sheet Metal Forming

NASA Astrophysics Data System (ADS)

Narainen, Rodrigue; Porzner, Harald

2016-08-01

Die Starter, a new system developed by ESI Group, allows the user to drastically reduce the number of iterations during the early tool process feasibility. This innovative system automatically designs the first quick die face, generating binder and addendum surfaces (NURBS surfaces) by taking account the full die process. Die Starter also improves the initial die face based on feasibility criteria (avoiding splits, wrinkles) by automatically generating the geometrical modifications of the binder and addendum and the bead restraining forces with minimal material usage. This paper presents a description of the new system and the methodology of Die Starter. Some industrial examples are presented from the part geometry to final die face including automatic developed flanges, part on binder and inner binder.

Client Perceptions of Helpfulness in Therapy: a Novel Video-Rating Methodology for Examining Process Variables at Brief Intervals During a Single Session.

PubMed

Cocklin, Alexandra A; Mansell, Warren; Emsley, Richard; McEvoy, Phil; Preston, Chloe; Comiskey, Jody; Tai, Sara

2017-11-01

The value of clients' reports of their experiences in therapy is widely recognized, yet quantitative methodology has rarely been used to measure clients' self-reported perceptions of what is helpful over a single session. A video-rating method using was developed to gather data at brief intervals using process measures of client perceived experience and standardized measures of working alliance (Session Rating Scale; SRS). Data were collected over the course of a single video-recorded session of cognitive therapy (Method of Levels Therapy; Carey, 2006; Mansell et al., 2012). We examined the acceptability and feasibility of the methodology and tested the concurrent validity of the measure by utilizing theory-led constructs. Eighteen therapy sessions were video-recorded and clients each rated a 20-minute session of therapy at two-minute intervals using repeated measures. A multi-level analysis was used to test for correlations between perceived levels of helpfulness and client process variables. The design proved to be feasible. Concurrent validity was borne out through high correlations between constructs. A multi-level regression examined the independent contributions of client process variables to client perceived helpfulness. Client perceived control (b = 0.39, 95% CI .05 to 0.73), the ability to talk freely (b = 0.30, SE = 0.11, 95% CI .09 to 0.51) and therapist approach (b = 0.31, SE = 0.14, 95% CI .04 to 0.57) predicted client-rated helpfulness. We identify a feasible and acceptable method for studying continuous measures of helpfulness and their psychological correlates during a single therapy session.

Numerical and Engine Cycle Analyses of a Pulse Laser Ramjet Vehicle

NASA Astrophysics Data System (ADS)

Katsurayama, Hiroshi; Komurasaki, Kimiya; Momozawa, Ai; Arakawa, Yoshihiro

A preliminary feasibility study of a laser ramjet SSTO has been conducted using engine cycle analysis. Although a large amount of laser energy is lost due to chemically frozen flow at high altitudes, the laser ramjet SSTO was found to be feasible with 100 MW laser power for 100 kg vehicle mass and 1 m2 vehicle cross-section area. Obtained momentum coupling coefficient, Cm, was validated by means of CFD. As a result, the engine cycle analysis was under-estimating Cm. This would be because of the strong unsteady energy input in the actual heating process and the spatially localized pressure on the afterbody.

The NAIMS cooperative pilot project: Design, implementation and future directions.

PubMed

Oh, Jiwon; Bakshi, Rohit; Calabresi, Peter A; Crainiceanu, Ciprian; Henry, Roland G; Nair, Govind; Papinutto, Nico; Constable, R Todd; Reich, Daniel S; Pelletier, Daniel; Rooney, William; Schwartz, Daniel; Tagge, Ian; Shinohara, Russell T; Simon, Jack H; Sicotte, Nancy L

2017-10-01

The North American Imaging in Multiple Sclerosis (NAIMS) Cooperative represents a network of 27 academic centers focused on accelerating the pace of magnetic resonance imaging (MRI) research in multiple sclerosis (MS) through idea exchange and collaboration. Recently, NAIMS completed its first project evaluating the feasibility of implementation and reproducibility of quantitative MRI measures derived from scanning a single MS patient using a high-resolution 3T protocol at seven sites. The results showed the feasibility of utilizing advanced quantitative MRI measures in multicenter studies and demonstrated the importance of careful standardization of scanning protocols, central image processing, and strategies to account for inter-site variability.

Characteristics of sludge reduction in an integrated pretreatment and aerobic digestion process.

PubMed

Hwang, S; Jang, H; Lee, M; Song, J; Kim, S

2006-01-01

In this study, integrated pretreatments and aerobic digestion processes were investigated in order to provide a feasible alternative that can achieve effective sludge reduction. An ozone treatment in the presence of ionic manganese, a catalyst, increased the sludge reduction ratio three times higher than that of a single ozonation, presumably due to an increase in OH radical production. The ozone treatment yielded the effective sludge reduction ratio with an increasing ozone dosage, and an effective dosage of the catalyst was found to be 4 mg-Mn/g-TS. When a mechanical pretreatment and an ozone/catalyst were applied in a series, the integrated process, even at a half mechanical intensity and a half level of ozone dosage, showed higher and faster sludge reduction than each single process did. In addition, the integrated pretreatment process showed the highest dewaterability of the treated sludges. A ratio of sludge cake generation, which was newly introduced to quantify overall performance of sludge treatment processes, showed that the integrated pretreatment followed by the aerobic digestion yielded approximately a half of the sludge cake volume compared to the single aerobic digestion. Therefore, the integrated pretreatment can be a feasible method for the effective reduction of total suspended solid and the final volume.

Comparative study of manufacturing condyle implant using rapid prototyping and CNC machining

NASA Astrophysics Data System (ADS)

Bojanampati, S.; Karthikeyan, R.; Islam, MD; Venugopal, S.

2018-04-01

Injuries to the cranio-maxillofacial area caused by road traffic accidents (RTAs), fall from heights, birth defects, metabolic disorders and tumors affect a rising number of patients in the United Arab Emirates (UAE), and require maxillofacial surgery. Mandibular reconstruction poses a specific challenge in both functionality and aesthetics, and involves replacement of the damaged bone by a custom made implant. Due to material, design cycle time and manufacturing process time, such implants are in many instances not affordable to patients. In this paper, the feasibility of designing and manufacturing low-cost, custom made condyle implant is assessed using two different approaches, consisting of rapid prototyping and three-axis computer numerically controlled (CNC) machining. Two candidate rapid prototyping techniques are considered, namely fused deposition modeling (FDM) and three-dimensional printing followed by sand casting The feasibility of the proposed manufacturing processes is evaluated based on manufacturing time, cost, quality, and reliability.

Quantum realization of the bilinear interpolation method for NEQR.

PubMed

Zhou, Ri-Gui; Hu, Wenwen; Fan, Ping; Ian, Hou

2017-05-31

In recent years, quantum image processing is one of the most active fields in quantum computation and quantum information. Image scaling as a kind of image geometric transformation has been widely studied and applied in the classical image processing, however, the quantum version of which does not exist. This paper is concerned with the feasibility of the classical bilinear interpolation based on novel enhanced quantum image representation (NEQR). Firstly, the feasibility of the bilinear interpolation for NEQR is proven. Then the concrete quantum circuits of the bilinear interpolation including scaling up and scaling down for NEQR are given by using the multiply Control-Not operation, special adding one operation, the reverse parallel adder, parallel subtractor, multiplier and division operations. Finally, the complexity analysis of the quantum network circuit based on the basic quantum gates is deduced. Simulation result shows that the scaled-up image using bilinear interpolation is clearer and less distorted than nearest interpolation.

Smart Aquarium as Physics Learning Media for Renewable Energy

NASA Astrophysics Data System (ADS)

Desnita, D.; Raihanati, R.; Susanti, D.

2018-04-01

Smart aquarium has been developed as a learning media to visualize Micro Hydro Power Generator (MHPG). Its used aquarium water circulation system and Wind Power Generation (WPG) which generated through a wheel as a source. Its also used to teach about energy changes, circular motion and wheel connection, electromagnetic impact, and AC power circuit. The output power and system efficiency was adjusted through the adjustment of water level and wind speed. Specific targets in this research are: to achieved: (i) develop green aquarium technology that’s suitable to used as a medium of physics learning, (ii) improving quality of process and learning result at a senior high school student. Research method used development research by Borg and Gall, which includes preliminary studies, design, product development, expert validation, and product feasibility test, and vinalisation. The validation test by the expert states that props feasible to use. Limited trials conducted prove that this tool can improve students science process skills.

KENNEDY SPACE CENTER, FLA. - At the Rotation, Processing and Surge Facility stand a mockup of two segments of a solid rocket booster (SRB) being used to test the feasibility of a vertical SRB propellant grain inspection, required as part of safety analysis.

NASA Image and Video Library

2003-09-11

KENNEDY SPACE CENTER, FLA. - At the Rotation, Processing and Surge Facility stand a mockup of two segments of a solid rocket booster (SRB) being used to test the feasibility of a vertical SRB propellant grain inspection, required as part of safety analysis.

[Study on extraction and purification process of total ginsenosides from Radix Ginseng].

PubMed

Xie, Li-Ling; Ren, Li; Lai, Xian-Sheng; Cao, Jun-Hui; Mo, Quan-Yi; Chen, Wei-Wen

2009-10-01

To optimize the technological parameters of the extraction and purification process of total ginsenosides from Radix Ginseng. With the contents of ginsenoside Rg1, ginsenoside Re and ginsenoside Rb1, the orthogonal design was adopted to optimize the extraction process. The purification process was studied by optimizing the elutive ratio of total ginsenosides as the marker. HPLC and spectrophotometer were employed for the study. The optimum conditions were as follows:Using 8 times volume of 75% ethanol extracting for 120 minutes and 2 times, the extraction temperature was 85 degrees C. AB-8 macroporous resin was selected, and the eluant was 4 BV 70% ethanol. The optimal conditions of extracting and purifying the total ginsenosides from Radix Ginseng is feasible.

An initial investigation into the validity of a computer-based auditory processing assessment (Feather Squadron).

PubMed

Barker, Matthew D; Purdy, Suzanne C

2016-01-01

This research investigates a novel method for identifying and measuring school-aged children with poor auditory processing through a tablet computer. Feasibility and test-retest reliability are investigated by examining the percentage of Group 1 participants able to complete the tasks and developmental effects on performance. Concurrent validity was investigated against traditional tests of auditory processing using Group 2. There were 847 students aged 5 to 13 years in group 1, and 46 aged 5 to 14 years in group 2. Some tasks could not be completed by the youngest participants. Significant correlations were found between results of most auditory processing areas assessed by the Feather Squadron test and traditional auditory processing tests. Test-retest comparisons indicated good reliability for most of the Feather Squadron assessments and some of the traditional tests. The results indicate the Feather Squadron assessment is a time-efficient, feasible, concurrently valid, and reliable approach for measuring auditory processing in school-aged children. Clinically, this may be a useful option for audiologists when performing auditory processing assessments as it is a relatively fast, engaging, and easy way to assess auditory processing abilities. Research is needed to investigate further the construct validity of this new assessment by examining the association between performance on Feather Squadron and objective evoked potential, lesion studies, and/or functional imaging measures of auditory function.

Feasibility Studies of Optical Processing of Image Bandwidth Compression Schemes.

DTIC Science & Technology

1983-05-15

R.N. STRICKIAND AFOSR-81-O170 R.A. SCHOWENGERDT S. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT, PROJECT. TASK Ur,;t. o4 o . AREA & WORK...is the intent of research sponsored under this Grant to direct investi- gation into the following issues: () formulation of alternative architechtural

The Value of Participatory Decision-Making: A Collaborative Approach.

ERIC Educational Resources Information Center

Richardson, M. D.; And Others

This study investigated the practicality and feasibility of the public school administrator permitting those concerned, faculty, students, parents and interested citizens, to participate in the decision making process of the local school. An added purpose was to find applicable and effective ways the principal could support meaningful…

TREATABILITY STUDY BULLETIN: MOBILE VOLUME REDUCTION UNIT AT THE ESCAMBIA SUPERFUND SITE

EPA Science Inventory

The RREL has developed a pilot-scale Mobile Volume Reduction Unit (VRU) to determine the feasibility of soil washing for the remediation of contaminated soils. This mobile unit, mounted on two trailers, can process 100 lb/hr of soil feed. Soil washing is a cost effective technolo...

One-Step "Change" and "Compare" Word Problems: Focusing on Eye-Movements

ERIC Educational Resources Information Center

Moutsios-Rentzos, Andreas; Stamatis, Panagiotis J.

2015-01-01

Introduction. In this study, we focus on the relationship between the students' mathematical thinking and their non-mechanically identified eye-movements with the purpose to gain deeper understanding about the students' reasoning processes and to investigate the feasibility of incorporating eye-movement information in everyday pedagogy. Method.…

Designing the Horizons of Your Small Business.

ERIC Educational Resources Information Center

Helgemo, Robert R.

This manual outlines the planning process for developing a feasibility study for a small business. The material is composed of three parts: the planning documents filled out for an imaginary campground; a business plan summarized from the planning documents; and blank planning documents with introductions and instructions. The documents can be…

Automatic Term Class Construction Using Relevance--A Summary of Work in Automatic Pseudoclassification.

ERIC Educational Resources Information Center

Salton, G.

1980-01-01

Summarizes studies of pseudoclassification, a process of utilizing user relevance assessments of certain documents with respect to certain queries to build term classes designed to retrieve relevant documents. Conclusions are reached concerning the effectiveness and feasibility of constructing term classifications based on human relevance…

TREATMENT OF URBAN STORMWATER FOR DISSOLVED POLLUTANTS: A COMPARATIVE STUDY OF THREE NATURAL ORGANIC MEDIA

EPA Science Inventory

The feasibility of using hard and soft wood tree mulch and processed jute fiber, as filter media, for treating mixtures of dissolved pollutants (toxic organic compounds and heavy metals) in urban stormwater (SW) runoff was evaluated. Copper (Cu), cadmium (Cd), chromium (Cr+6), l...

Simultaneous saccharification and fermentation of industrial sweetpotatoes for ethanol production and anthocyanins extraction

USDA-ARS?s Scientific Manuscript database

A simultaneous saccharification fermentation (SSF) system was studied for ethanol production in flour industrial sweetpotato (ISP) feedstocks (lines: white DM02-180 and purple NC-413) as an integrated cost saving process, and to examine the feasibility of extracting anthocyanins from flour purple IS...

Objective Criteria for the Selection of Software.

ERIC Educational Resources Information Center

Burk, Laurena

The seven stages in the system development process are discussed in the context of implementing basic arithmetic drill and practice exercises on a computer-based system: (1) feasibility study; (2) requirements definition; (3) alternative specifications; (4) evaluation and selection of an alternative; (5) system design; (6) development and testing;…

Feasibility of reclaimed asphalt pavement as aggregate in portland cement concrete pavement, phase II : field demonstration.

DOT National Transportation Integrated Search

2015-10-01

This research was focused on evaluating the feasibility of using minimally processed reclaimed asphalt pavement (RAP) as : aggregate replacement in concrete pavements. An initial phase of research demonstrated that concretes with up to 50 percent : o...

Techno-economic feasibility and life cycle assessment of dairy effluent to renewable diesel via hydrothermal liquefaction.

PubMed

Summers, Hailey M; Ledbetter, Rhesa N; McCurdy, Alex T; Morgan, Michael R; Seefeldt, Lance C; Jena, Umakanta; Hoekman, S Kent; Quinn, Jason C

2015-11-01

The economic feasibility and environmental impact is investigated for the conversion of agricultural waste, delactosed whey permeate, through yeast fermentation to a renewable diesel via hydrothermal liquefaction. Process feasibility was demonstrated at laboratory-scale with data leveraged to validate systems models used to perform industrial-scale economic and environmental impact analyses. Results show a minimum fuel selling price of $4.78 per gallon of renewable diesel, a net energy ratio of 0.81, and greenhouse gas emissions of 30.0g-CO2-eqMJ(-1). High production costs and greenhouse gas emissions can be attributed to operational temperatures and durations of both fermentation and hydrothermal liquefaction. However, high lipid yields of the yeast counter these operational demands, resulting in a favorable net energy ratio. Results are presented on the optimization of the process based on economy of scale and a sensitivity analysis highlights improvements in conversion efficiency, yeast biomass productivity and hydrotreating efficiency can dramatically improve commercial feasibility. Copyright © 2015 Elsevier Ltd. All rights reserved.

Group-Based Yogic Weight Loss with Ayurveda-Inspired Components: A Pilot Investigation of Female Yoga Practitioners and Novices.

PubMed

Braun, Tosca D; Park, Crystal L; Gorin, Amy A; Garivaltis, Hilary; Noggle, Jessica J; Conboy, Lisa A

2016-01-01

Overweight/obesity is a pressing international health concern and conventional treatments demonstrate poor long-term efficacy. Preliminary evidence suggests yoga and Ayurveda may be promising approaches, although recent NHIS estimates indicate rare utilization of Ayurveda in the US. Group-based curricula that integrate yoga and Ayurveda-inspired principles to attenuate overweight and obesity across individuals may prove a feasible, disseminable clinical adjunct to facilitate psychosocial health and weight loss and/or maintenance. Determine feasibility and preliminary effectiveness of a ten-week yoga - based, Ayurveda-inspired weight management curriculum (YWL) piloted in female yoga practitioners (Study 1) then refined and tailored for yoga naïves (Study 2), on self-reported psychosocial process variables and % of self-reported total body weight loss (%TBWL). Study 1 enrolled 22 yoga-experienced women (48.2 ± 14.3 years, BMI 30.8 ± 4.2 kg/m2) in a 10-week yoga-based program (YWL-YE). Study 2 enrolled 21 yoga- naïve women (49.4 ± 10.7 years, BMI 35.5 ± 6.8 kg/m2) in a revised 10-week program (YWL-YN). Self-reported weight and self-ratings of mindful eating behavior, body image disturbance, weight loss self-efficacy, body awareness, and self-compassion were collected at baseline, post-treatment (T2), and 3-month follow- up (T3). YWL curricula was feasible in both studies. While attrition rates for both studies favorably compared to other weight management studies, attrition was higher for YWL-YN (28.6%) than YWL-YE (18.2%). In both studies, self-reported process variables and self-reported % TBWL changed in hypothesized directions at T2 and evidenced greater improvement at T3; effect sizes across all process variables were medium (-0.4) to large (-1.8). % TBWL reached clinical significance (>5%) only at T3 for the YWL-YE group. The YWL curricula employed here appear to improve psychosocial health among both overweight/obese yoga-experienced and yoga- naïve women. Results must be interpreted with caution due to study design, self-report assessments, and other limitations. Nonetheless, hypotheses are generated for future investigation.

Group-Based Yogic Weight Loss with Ayurveda-Inspired Components: A Pilot Investigation of Female Yoga Practitioners and Novices.

PubMed

Braun, Tosca D; Park, Crystal L; Gorin, Amy A; Garivaltis, Hilary; Noggle, Jessica J; Conboy, Lisa A

2016-09-01

Overweight/obesity is a pressing international health concern and conventional treatments demonstrate poor long-term efficacy. Preliminary evidence suggests yoga and Ayurveda may be promising approaches, although recent NHIS estimates indicate rare utilization of Ayurveda in the US. Group-based curricula that integrate yoga and Ayurveda-inspired principles to attenuate overweight and obesity across individuals may prove a feasible, disseminable clinical adjunct to facilitate psychosocial health and weight loss and/or maintenance. Determine feasibility and preliminary effectiveness of a ten-week yoga-based, Ayurveda-inspired weight management curriculum (YWL) piloted in female yoga practitioners (Study 1) then refined and tailored for yoga naïves (Study 2), on self-reported psychosocial process variables and % of self-reported total body weight loss (%TBWL). Study 1 enrolled 22 yoga-experienced women (48.2 ± 14.3 years, BMI 30.8 ± 4.2 kg/m2) in a 10-week yoga-based program (YWL-YE). Study 2 enrolled 21 yoga- naïve women (49.4 ± 10.7 years, BMI 35.5 ± 6.8 kg/m2) in a revised 10-week program (YWL-YN). Self-reported weight and self-ratings of mindful eating behavior, body image disturbance, weight loss self-efficacy, body awareness, and self-compassion were collected at baseline, post-treatment (T2), and 3-month follow- up (T3). YWL curricula was feasible in both studies. While attrition rates for both studies favorably compared to other weight management studies, attrition was higher for YWL-YN (28.6%) than YWL-YE (18.2%). In both studies, self-reported process variables and self-reported % TBWL changed in hypothesized directions at T2 and evidenced greater improvement at T3; effect sizes across all process variables were medium (-0.4) to large (-1.8). % TBWL reached clinical significance (>5%) only at T3 for the YWL-YE group. The YWL curricula employed here appear to improve psychosocial health among both overweight/obese yoga-experienced and yoga-naïve women. Results must be interpreted with caution due to study design, self-report assessments, and other limitations. Nonetheless, hypotheses are generated for future investigation.

Process Feasibility Study in Support of Silicon Material, Task 1

NASA Technical Reports Server (NTRS)

Li, K. Y.; Hansen, K. C.; Yaws, C. L.

1979-01-01

During this reporting period, major activies were devoted to process system properties, chemical engineering and economic analyses. Analyses of process system properties was continued for materials involved in the alternate processes under consideration for solar cell grade silicon. The following property data are reported for silicon tetrafluoride: critical constants, vapor pressure, heat of varporization, heat capacity, density, surface tension, viscosity, thermal conductivity, heat of formation and Gibb's free energy of formation. Chemical engineering analysis of the BCL process was continued with primary efforts being devoted to the preliminary process design. Status and progress are reported for base case conditions; process flow diagram; reaction chemistry; material and energy balances; and major process equipment design.

A protocol for a randomised double-blind placebo-controlled feasibility study to determine whether the daily consumption of flavonoid-rich pure cocoa has the potential to reduce fatigue in people with relapsing and remitting multiple sclerosis (RRMS).

PubMed

Coe, S; Collett, J; Izadi, H; Wade, D T; Clegg, M; Harrison, J M; Buckingham, E; Cavey, A; DeLuca, G C; Palace, J; Dawes, H

2018-01-01

Dietary interventions including consumption of flavonoids, plant compounds found in certain foods, may have the ability to improve fatigue. However, to date, no well-designed intervention studies assessing the role of flavonoid consumption for fatigue management in people with MS (pwMS) have been performed. The hypothesis is that the consumption of a flavonoid-rich pure cocoa beverage will reduce fatigue in pwMS. The aim of this study is to determine the feasibility and potential outcome of running a trial to evaluate this hypothesis. Using a randomised (1:1) double-blind placebo-controlled feasibility study, 40 men and women (20 in each trial arm) with a recent diagnosis (< 10 years) of relapsing and remitting MS (RRMS) and who are over 18 years of age will be recruited from neurology clinics and throughout the Thames Valley community. During a 6-week nutrition intervention period, participants will consume the cocoa beverage, high flavonoid or low flavonoid content, at breakfast daily. At baseline, demographic factors and disease-related factors will be assessed. Fatigue, activity and quality of life, in addition to other measures, will be taken at three visits (baseline, week 3 and week 6) in a university setting by a researcher blinded to group membership. Feasibility and fidelity will be assessed through recruitment and retention, adherence and a quantitative process evaluation at the end of the trial.We will describe demographic factors (age, gender, level of education) as well as disease-related factors (disease burden scores, length of time diagnosed with MS) and cognitive assessment, depression and quality of life and general physical activity in order to characterise participants and determine possible mediators to identify the processes by which the intervention may bring about change. Feasibility (recruitment, safety, feasibility of implementation of the intervention and evaluation, protocol adherence and data completion) and potential for benefit (estimates of effect size and variability) will be determined to inform future planned studies. Results will be presented using point estimates, 95% confidence intervals and p values. Primary statistical analysis will be on an intention-to-treat basis and will use the complete case data set. We propose that a flavonoid-enriched cocoa beverage for the management of fatigue will be well received by participants. Further, if it is implemented early in the disease course of people diagnosed with RRMS, it will improve mobility and functioning by modifying fatigue. Registered with ISRCTN Registry. Trial registration No: ISRCTN69897291; Date April 2016.

The Domain-Specific Software Architecture Program

DTIC Science & Technology

1992-06-01

Kang, K.C; Cohen, S.C: Jess, J.A; Novak, W.E; Peterson, A.S. Feature- Oriented Domain Analysis ( FODA ) Feasibility Study. (CMU/SEI-90-TR-21, ADA235785...perspective of a con- trols engineer solving a problem using an iterative process of simulation and analysis . The CMU/SEI-92-SR-9 1 I ~math AnalysislP...for schedulability analysis and Markov processes for the determination of reliability. Software architectures are derived from these formal models. ORA

Developing a practice guideline for the occupational health services by using a community of practice approach: a process evaluation of the development process.

PubMed

Kwak, Lydia; Wåhlin, Charlotte; Stigmar, Kjerstin; Jensen, Irene

2017-01-18

One way to facilitate the translation of research into the occupational health service practice is through clinical practice guidelines. To increase the implementability of guidelines it is important to include the end-users in the development, for example by a community of practice approach. This paper describes the development of an occupational health practice guideline aimed at the management of non-specific low back pain (LBP) by using a community of practice approach. The paper also includes a process evaluation of the development providing insight into the feasibility of the process. A multidisciplinary community of practice group (n = 16) consisting of occupational nurses, occupational physicians, ergonomists/physical therapists, health and safety engineers, health educators, psychologists and researchers from different types of occupational health services and geographical regions within Sweden met eleven times (June 2012-December 2013) to develop the practice guideline following recommendations of guideline development handbooks. Process-outcomes recruitment, reach, context, satisfaction, feasibility and fidelity were assessed by questionnaire, observations and administrative data. Group members attended on average 7.5 out of 11 meetings. Half experienced support from their workplace for their involvement. Feasibility was rated as good, except for time-scheduling. Most group members were satisfied with the structure of the process (e.g. presentations, multidisciplinary group). Fidelity was rated as fairly high. The described development process is a feasible process for guideline development. For future guideline development expectations of the work involved should be more clearly communicated, as well as the purpose and tasks of the CoP-group. Moreover, possibilities to improve support from managers and colleagues should be explored. This paper has important implications for future guideline development; it provides valuable information on how practitioners can be included in the development process, with the aim of increasing the implementability of the developed guidelines.

Care Planning for Prostate Cancer Patients on Active Surveillance

DTIC Science & Technology

2016-10-01

intervention (PCPEP) for prostate cancer patients on active surveillance ( Study Specific Aim 1). As part of the adoption process, we will: (Aim 1a...evaluate the acceptability and feasibility of the program with prostate cancer patients on active surveillance in a small pilot study ( Study Specific...to a poster depicting the study finding on “Treatment 4 Decision-making and Adherence to Active Surveillance in Prostate Cancer Patients” presented

Peer Review of Grant Applications: Criteria Used and Qualitative Study of Reviewer Practices

PubMed Central

Abdoul, Hendy; Perrey, Christophe; Amiel, Philippe; Tubach, Florence; Gottot, Serge; Durand-Zaleski, Isabelle; Alberti, Corinne

2012-01-01

Background Peer review of grant applications has been criticized as lacking reliability. Studies showing poor agreement among reviewers supported this possibility but usually focused on reviewers’ scores and failed to investigate reasons for disagreement. Here, our goal was to determine how reviewers rate applications, by investigating reviewer practices and grant assessment criteria. Methods and Findings We first collected and analyzed a convenience sample of French and international calls for proposals and assessment guidelines, from which we created an overall typology of assessment criteria comprising nine domains relevance to the call for proposals, usefulness, originality, innovativeness, methodology, feasibility, funding, ethical aspects, and writing of the grant application. We then performed a qualitative study of reviewer practices, particularly regarding the use of assessment criteria, among reviewers of the French Academic Hospital Research Grant Agencies (Programmes Hospitaliers de Recherche Clinique, PHRCs). Semi-structured interviews and observation sessions were conducted. Both the time spent assessing each grant application and the assessment methods varied across reviewers. The assessment criteria recommended by the PHRCs were listed by all reviewers as frequently evaluated and useful. However, use of the PHRC criteria was subjective and varied across reviewers. Some reviewers gave the same weight to each assessment criterion, whereas others considered originality to be the most important criterion (12/34), followed by methodology (10/34) and feasibility (4/34). Conceivably, this variability might adversely affect the reliability of the review process, and studies evaluating this hypothesis would be of interest. Conclusions Variability across reviewers may result in mistrust among grant applicants about the review process. Consequently, ensuring transparency is of the utmost importance. Consistency in the review process could also be improved by providing common definitions for each assessment criterion and uniform requirements for grant application submissions. Further research is needed to assess the feasibility and acceptability of these measures. PMID:23029386

Practice and professional development plans (PPDPs): results of a feasibility study

PubMed Central

Elwyn, Glyn; Carlisle, Sandra; Hocking, Paul; Smail, Simon

2001-01-01

Background Dissatisfaction with uniprofessional education structures as a means of improving the quality of healthcare has led to proposals to develop ways of integrating professional learning and organisational development. Aims Test the feasibility of introducing practice and professional development plans using a centrally sponsored project in Wales. Design Qualitative observational study. Study sample All 541 practices in Wales were alerted to the project and invited to apply. A selection process was suggested to Health Authorities but not always efficiently conducted: 23 practices were selected and 18 participated in the process. Method Central funding was made available to health authorities. The project framework was designed by an educational department and conceptualised as the development of personal portfolios linked to one key organisation change in each practice, facilitated by external consultants who would typically hold workshops or other events. An independent researcher using non-participant observation techniques at workshops and practices undertook documentary analysis and fieldwork in four health authorities. Results Difficulties were encountered with the process of implementing the project: marketing and practice selection inconsistencies delayed the work and it was difficult to recruit practices into the project. The lack of experienced individuals to do the work and practitioner suspicion about perceived 'management' agendas were significant problems. After initial hesitancies most practices appreciated the value of developing wider ownership and commitment to proposed practice changes. Organisations found it difficult to support individual completion of the personal portfolio component of the plans. The ability to develop systems for clinical services was dependent on having already established a culture of effective teamwork in the organisation. Conclusions This work supports the view that organisational development has considerable potential for bringing about effective change, and individual contributions could form a valuable component of personal portfolios. We believe that the existing structures in education and management in the health service are not yet able to support these processes. Evidence from the fields of risk management and quality improvement all point to the need to develop effective organisational systems and the results of this feasibility study indicate that alternative models of sustaining organisational development need careful evaluation. PMID:11299046

The development, feasibility and acceptability of an Internet-based STI–HIV prevention intervention for young Chilean women

PubMed Central

Villegas, N.; Santisteban, D.; Cianelli, R.; Ferrer, L.; Ambrosia, T.; Peragallo, N.; Lara, L.

2014-01-01

Background Young Chilean women between 18 and 24 years of age are at high risk of contracting sexually transmitted infection (STI) and human immunodeficiency virus (HIV). The literature shows a shortage of STI–HIV prevention interventions focused on this specific high-risk population and a unique set of barriers to receiving prevention messages. Internet-based interventions are promising for delivering STI–HIV prevention interventions and avoiding barriers to services. Aims The study aimed to develop a culturally informed Internet-based STI–HIV prevention intervention for Chilean women between 18 and 24 years of age, to investigate its feasibility and acceptability, and to compile recommendations on what would make the intervention more acceptable and feasible for these women. Methods The development of the Internet intervention was facilitated by a process that featured consultation with content and technology experts. A pre-post test design was used to test the acceptability and feasibility of the intervention with 40 young Chilean women between 18 and 24 years of age. Results The intervention website consisted of four modules of content and activities that support learning. The intervention was feasible and acceptable for young Chilean women between 18 and 24 years of age. Discussion and conclusion This study demonstrated the value of engaging multiple expert panels to develop culturally informed and technology-based interventions. The results of this study support the feasibility and acceptability of conducting an Internet-based intervention with multiple sessions, yielding high participation rates in a population in which there are barriers to discussion of STI–HIV prevention and sex-related content. Implications for nursing and health policy The outcomes have implications for nursing education and clinical practice and they can be used for the legal and judicial systems to promote or reinforce policies that encourage STI–HIV prevention strategies among women. PMID:24512261

HOspitals and patients WoRking in Unity (HOW R U?): telephone peer support to improve older patients’ quality of life after emergency department discharge in Melbourne, Australia—a multicentre prospective feasibility study

PubMed Central

Lennox, Alyse; Curtis, Andrea; Wilson, Gillian; Rosewarne, Cate; Smit, De Villiers; O’Brien, Debra; Browning, Colette Joy; Boyd, Lee; Smith, Cathie; Cameron, Peter

2018-01-01

Objectives To ascertain the feasibility and acceptability of the HOW R U? programme, a novel volunteer-peer postdischarge support programme for older patients after discharge from the emergency department (ED). Design A multicentre prospective mixed-methods feasibility study. Setting Two tertiary hospital EDs in metropolitan Melbourne, Australia. Participants A convenience sample of 39 discharged ED patients aged 70 years or over, with symptoms of social isolation, loneliness and/or depression. Intervention The HOW R U? intervention comprised weekly social support telephone calls delivered by volunteer peers for 3 months following ED discharge. Primary and secondary outcome measures The primary outcomes were feasibility of study processes, intervention acceptability to participants and retention in the programme. Secondary outcomes were changes in loneliness level (UCLA-3—3-item Loneliness Scale), mood (5-item Geriatric Depression Scale) and health-related quality of life (EQ-5D-5L and EQ-VAS) postintervention. Results Recruitment was feasible, with 30% of eligible patients successfully recruited. Seventeen volunteer peers provided telephone support to patient participants, in addition to their usual hospital volunteer role. HOW R U? was well received, with 87% retention in the patient group, and no attrition in the volunteer group. The median age of patients was 84 years, 64% were female, and 82% lived alone. Sixty-eight per cent of patients experienced reductions in depressive symptoms, and 53% experiencing reduced feelings of loneliness, and these differences were statistically significant Patient feedback was positive and volunteers reported great satisfaction with their new role. Conclusion HOW R U? was feasible in terms of recruitment and retention and was acceptable to both patients and volunteers. The overall results support the potential for further research in this area and provide data to support the design of a definitive trial to confirm the observed effects. Trial registration number ANZCTRN12615000715572; Results. PMID:29903788

Using Digital and Paper Diaries for Learning and Assessment Purposes in Higher Education: A Comparative Study of Feasibility and Reliability

ERIC Educational Resources Information Center

Gleaves, Alan; Walker, Caroline; Grey, John

2007-01-01

The incorporation of diaries and journals as learning and assessment vehicles into programmes of study within higher education has enabled the further growth of reflection, creative writing, critical thinking and meta-cognitive processes of students' learning. However, there is currently little research that aims to compare how different types of…

Wave and Beach Processes Modeling for Sabine Pass to Galveston Bay, Texas, Shoreline Erosion Feasibility Study

DTIC Science & Technology

2007-08-01

local wind field , led to the development of an appropriate alternative procedure which produced GENESIS results in agreement with observations...River field site wave data. ........................................................................................................53 Table 17...been abandoned since 1989 due to shoreline erosion. From east to west, the inlets in the study area include Sabine Pass, Rollover Pass near the

Atrial Fibrillation Screening in Nonmetropolitan Areas Using a Telehealth Surveillance System With an Embedded Cloud-Computing Algorithm: Prospective Pilot Study.

PubMed

Chen, Ying-Hsien; Hung, Chi-Sheng; Huang, Ching-Chang; Hung, Yu-Chien; Hwang, Juey-Jen; Ho, Yi-Lwun

2017-09-26

Atrial fibrillation (AF) is a common form of arrhythmia that is associated with increased risk of stroke and mortality. Detecting AF before the first complication occurs is a recognized priority. No previous studies have examined the feasibility of undertaking AF screening using a telehealth surveillance system with an embedded cloud-computing algorithm; we address this issue in this study. The objective of this study was to evaluate the feasibility of AF screening in nonmetropolitan areas using a telehealth surveillance system with an embedded cloud-computing algorithm. We conducted a prospective AF screening study in a nonmetropolitan area using a single-lead electrocardiogram (ECG) recorder. All ECG measurements were reviewed on the telehealth surveillance system and interpreted by the cloud-computing algorithm and a cardiologist. The process of AF screening was evaluated with a satisfaction questionnaire. Between March 11, 2016 and August 31, 2016, 967 ECGs were recorded from 922 residents in nonmetropolitan areas. A total of 22 (2.4%, 22/922) residents with AF were identified by the physician's ECG interpretation, and only 0.2% (2/967) of ECGs contained significant artifacts. The novel cloud-computing algorithm for AF detection had a sensitivity of 95.5% (95% CI 77.2%-99.9%) and specificity of 97.7% (95% CI 96.5%-98.5%). The overall satisfaction score for the process of AF screening was 92.1%. AF screening in nonmetropolitan areas using a telehealth surveillance system with an embedded cloud-computing algorithm is feasible. ©Ying-Hsien Chen, Chi-Sheng Hung, Ching-Chang Huang, Yu-Chien Hung, Juey-Jen Hwang, Yi-Lwun Ho. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 26.09.2017.

A process economic assessment of hydrocarbon biofuels production using chemoautotrophic organisms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Khan, NE; Myers, JA; Tuerk, AL

Economic analysis of an ARPA-e Electrofuels (http://arpa-e.energy.gov/?q=arpa-e-programs/electrofuels) process is presented, utilizing metabolically engineered Rhodobacter capsulatus or Ralstonia eutropha to produce the C30+ hydrocarbon fuel, botryococcene, from hydrogen, carbon dioxide, and oxygen. The analysis is based on an Aspen plus (R) bioreactor model taking into account experimentally determined Rba. capsulatus and Rls. eutropha growth and maintenance requirements, reactor residence time, correlations for gas-liquid mass-transfer coefficient, gas composition, and specific cellular fuel productivity. Based on reactor simulation results encompassing technically relevant parameter ranges, the capital and operating costs of the process were estimated for 5000 bbl-fuel/day plant and used to predict fuelmore » cost. Under the assumptions used in this analysis and crude oil prices, the Levelized Cost of Electricity (LCOE) required for economic feasibility must be less than 2(sic)/kWh. While not feasible under current market prices and costs, this work identifies key variables impacting process cost and discusses potential alternative paths toward economic feasibility. (C) 2014 Elsevier Ltd. All rights reserved.« less

Reducing Amputations in People with Diabetes (RAPID): Evaluation of a New Care Pathway

PubMed Central

MacRury, Sandra; Main, Fiona; Gorman, Jane; Jones, Sandra; Macfarlane, David

2018-01-01

People with diabetes are at increased risk of foot ulcers, which, if left untreated, can lead to infection, gangrene, and subsequent amputation. Management by a multidisciplinary diabetes foot team has been shown to reduce amputation rates; however, accessing specialist treatment is made particularly difficult when living in remote and rural locations, such as many individuals cared for within NHS Highland. The RAPID project was made up of two phases: firstly, to evaluate the technical feasibility of a new integrated care pathway using innovative technology, and secondly, to establish process enhancement of the pathway to justify a larger-scale study. Omni-HubTM enabled a face-to-face consultation by the community podiatrist to be enhanced by virtual consultation with members of the multidisciplinary foot team, including specialist diabetes podiatrists and a diabetes consultant. The technical feasibility study provided recommended changes focused around adaptations to the equipment used and the best means to gain successful connectivity. The process enhancement study demonstrated positive outcomes in the process with positive effects both in the service received by patients and experiences of healthcare professionals involved. The RAPID project provides evidence and justification for a larger-scale empirical study to test an embedded pathway and technology solution, which will inform policy change and a paradigm shift in the management of foot ulceration in the community. PMID:29772673

Reducing Amputations in People with Diabetes (RAPID): Evaluation of a New Care Pathway.

PubMed

MacRury, Sandra; Stephen, Kate; Main, Fiona; Gorman, Jane; Jones, Sandra; Macfarlane, David

2018-05-16

People with diabetes are at increased risk of foot ulcers, which, if left untreated, can lead to infection, gangrene, and subsequent amputation. Management by a multidisciplinary diabetes foot team has been shown to reduce amputation rates; however, accessing specialist treatment is made particularly difficult when living in remote and rural locations, such as many individuals cared for within NHS Highland. The RAPID project was made up of two phases: firstly, to evaluate the technical feasibility of a new integrated care pathway using innovative technology, and secondly, to establish process enhancement of the pathway to justify a larger-scale study. Omni-Hub TM enabled a face-to-face consultation by the community podiatrist to be enhanced by virtual consultation with members of the multidisciplinary foot team, including specialist diabetes podiatrists and a diabetes consultant. The technical feasibility study provided recommended changes focused around adaptations to the equipment used and the best means to gain successful connectivity. The process enhancement study demonstrated positive outcomes in the process with positive effects both in the service received by patients and experiences of healthcare professionals involved. The RAPID project provides evidence and justification for a larger-scale empirical study to test an embedded pathway and technology solution, which will inform policy change and a paradigm shift in the management of foot ulceration in the community.

Tony Jimenez | NREL

Science.gov Websites

pre-feasibility analysis; wind data analysis; the small wind turbine certification process; economic Regional Test Center effort, analysis of the potential economic impact of large-scale MHK deployment off pre-feasibility analysis. Tony is an engineer officer in the Army Reserve. He has deployed twice

The Global Spine Care Initiative: a consensus process to develop and validate a stratification scheme for surgical care of spinal disorders as a guide for improved resource utilization in low- and middle-income communities.

PubMed

Acaroğlu, Emre; Mmopelwa, Tiro; Yüksel, Selcen; Ayhan, Selim; Nordin, Margareta; Randhawa, Kristi; Haldeman, Scott

2017-10-16

The purpose of this study was to develop a stratification scheme for surgical spinal care to serve as a framework for referrals and distribution of patients with spinal disorders. We used a modified Delphi process. A literature search identified experts for the consensus panel and the panel was expanded by inviting spine surgeons known to be global opinion leaders. After creating a seed document of five hierarchical levels of surgical care, a four-step modified Delphi process (question validation, collection of factors, evaluation of factors, re-evaluation of factors) was performed. Of 78 invited experts, 19 participated in round 1, and of the 19, 14 participated in 2, and 12 in 3 and 4. Consensus was fairly heterogeneous for levels of care 2-4 (moderate resources). Only simple assessment methods based on the clinical skills of the medical personnel were considered feasible and safe in low-resource settings. Diagnosis, staging, and treatment were deemed feasible and safe in a specialized spine center. Accurate diagnostic workup was deemed feasible and safe for lower levels of care complexity (from level 3 upwards) compared to non-invasive procedures (level 4) and the full range of invasive procedures (level 5). This study introduces a five-level stratification scheme for the surgical care of spinal disorders. This stratification may provide input into the Global Spine Care Initiative care pathway that will be applied in medically underserved areas and low- and middle-income countries. These slides can be retrieved under Electronic Supplementary Material.

The feasibility and cost of a large multicentre audit of process and outcome of prostatectomy.

PubMed Central

Emberton, M; Neal, D E; Black, N; Harrison, M; Fordham, M; McBrien, M P; Williams, R E; McPherson, K; Develin, H B

1995-01-01

Objective--To determine the feasibility of performing multicentre process and outcome audits of common interventions taking prostatic procedures as an example. Design--Prospective, cohort study. Setting--All National Health Service and independent hospitals in Northern, Wessex, Mersey, and South West Thames health regions. Patients--5361 men undergoing prostatectomy identified by 103 of the 107 urologists and general surgeons performing prostatectomy in the study regions. Main measures-- Rates of participation by surgeons and patients; completeness of clinical data provided by surgeons; patient response rate and completeness of patient derived data; and cost. Results--Most surgeons (103,96%) agreed to participate. Overall, the proportion of eligible patients invited to take part was high (89%), although this was only measured in South West Thames, where dedicated data collectors were employed. Few men (80, 1.5%) declined to participate. Of those surviving for three months after surgery, 82.4% (4226) completed and returned the postal questionnaire. The response rate was higher in South West Thames (86.7%) than in the other regions (80.6%-80.8%). The audit was well received: 91% of patients found the questionnaire easy to complete and only 2.3% of them disapproved. Completeness of data was high with both the hospital and patient questionnaires. Missing data occurred in less than 5% of responses to most questions. The attributable cost was 34.50 pounds per patient identified or 44 pounds for patients in whom either the treatment outcome or vital status was known three months after their prostatectomy. Conclusions--This multicentre audit of process and outcome of prostatectomy proved feasible in terms of surgeon participation, patient identification, and the quantity and quality of data collection. Whether the cost was warranted will depend on how surgeons use the audit data to modify their practice. PMID:10156395

43 CFR 404.20 - What information must I include in my full proposal to conduct an appraisal or a feasibility study?

Code of Federal Regulations, 2011 CFR

2011-10-01

... proposal to conduct an appraisal or a feasibility study? 404.20 Section 404.20 Public Lands: Interior... appraisal or a feasibility study? A full proposal to conduct an appraisal investigation or a feasibility... feasibility study and a plan for addressing those issues. The information provided must also address each of...

An MBE growth facility for real-time in situ synchrotron x-ray topography studies of strained-layer III-V epitaxial materials

NASA Astrophysics Data System (ADS)

Whitehouse, C. R.; Barnett, S. J.; Soley, D. E. J.; Quarrell, J.; Aldridge, S. J.; Cullis, A. G.; Emeny, M. T.; Johnson, A. D.; Clarke, G. F.; Lamb, W.; Tanner, B. K.; Cottrell, S.; Lunn, B.; Hogg, C.; Hagston, W.

1992-01-01

This paper describes a unique combined UHV MBE growth x-ray topography facility designed to allow the first real-time synchrotron radiation x-ray topography study of strained-layer III-V growth processes. This system will enable unambiguous determination of dislocation nucleation and multiplication processes as a function of controlled variations in growth conditions, and also during post-growth thermal processing. The planned experiments have placed very stringent demands upon the engineering design of the system, and design details regarding the growth chamber; sample manipulator, x-ray optics, and real-time imaging systems are described. Results obtained during a feasibility study are also presented.

An MBE growth facility for real-time in situ synchrotron x-ray topography studies of strained-layer III--V epitaxial materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitehouse, C.R.; Barnett, S.J.; Soley, D.E.J.

1992-01-01

This paper describes a unique combined UHV MBE growth x-ray topography facility designed to allow the first real-time synchrotron radiation x-ray topography study of strained-layer III--V growth processes. This system will enable unambiguous determination of dislocation nucleation and multiplication processes as a function of controlled variations in growth conditions, and also during post-growth thermal processing. The planned experiments have placed very stringent demands upon the engineering design of the system, and design details regarding the growth chamber; sample manipulator, x-ray optics, and real-time imaging systems are described. Results obtained during a feasibility study are also presented.

Home administration of maintenance pemetrexed for patients with advanced non-squamous non-small cell lung cancer: rationale, practicalities and phase II feasibility study design.

PubMed

Lal, Rohit; Bourayou, Nawel; Hillerdal, Gunnar; Nicolson, Marianne; Vikstrom, Anders; Lorenzo, Maria; D'yachkova, Yulia; Barriga, Susana; Visseren-Grul, Carla

2013-10-03

Home-based care in oncology is mainly reserved for patients at the end of life. Regulations regarding home delivery of cytotoxics differ across Europe, with a notable lack of practice guidelines in most countries. This has led to a lack of data addressing the feasibility of home-based administration of cytotoxic chemotherapy. In advanced non-squamous non-small cell lung cancer, pemetrexed is approved as maintenance therapy after first-line chemotherapy. In this setting, patients have the potential to be treated long-term with maintenance therapy, which, in the absence of unacceptable toxicity, is continued until disease progression. The favourable safety profile of pemetrexed and the ease of its administration by 10-minute intravenous infusion every 3 weeks make this drug a suitable candidate for administration in a home setting. Literature and regulations relevant to the home-based delivery of cytotoxic therapy were reviewed, and a phase II feasibility study of home administration of pemetrexed maintenance therapy was designed. At least 50 patients with advanced non-squamous non-small cell lung cancer, Eastern Cooperative Oncology Group performance status 0-1 and no progressive disease after four cycles of platinum-based first-line therapy are required to allow investigation of the feasibility of home-based administration of pemetrexed maintenance therapy (500 mg/m(2) every 3 weeks until progressive disease or unacceptable toxicity). Feasibility is being assessed as adherence to the home-based administration process (primary endpoint), patient safety, impact on patients' quality of life, patient and physician satisfaction with home care, and healthcare resource use and costs. Enrolment of patients from the UK and Sweden, where home-based care is relatively well developed, commenced in December 2011. This feasibility study addresses an important aspect of maintenance therapy, that is, patient comfort during protracted home-based chemotherapy. The study design requires unusual methodology and specific logistics to address outcomes relevant to the home-delivery approach. This article presents a study design that offers a novel and reproducible model for home-based chemotherapy, and provides an up-to-date overview of the literature regarding this type of treatment. ClinicalTrials.gov: NCT01473563.

Natural gas operations: considerations on process transients, design, and control.

PubMed

Manenti, Flavio

2012-03-01

This manuscript highlights tangible benefits deriving from the dynamic simulation and control of operational transients of natural gas processing plants. Relevant improvements in safety, controllability, operability, and flexibility are obtained not only within the traditional applications, i.e. plant start-up and shutdown, but also in certain fields apparently time-independent such as the feasibility studies of gas processing plant layout and the process design of processes. Specifically, this paper enhances the myopic steady-state approach and its main shortcomings with respect to the more detailed studies that take into consideration the non-steady state behaviors. A portion of a gas processing facility is considered as case study. Process transients, design, and control solutions apparently more appealing from a steady-state approach are compared to the corresponding dynamic simulation solutions. Copyright © 2011 ISA. Published by Elsevier Ltd. All rights reserved.

Feasibility study on the use of groupware support for NASA source evaluation boards

NASA Technical Reports Server (NTRS)

Bishop, Peter C.; Yoes, Cissy

1991-01-01

Groupware is a class of computer based systems that support groups engaged in a common task (or goal) and that provide an interface to a shared environment. A potential application for groupware is the source evaluation board (SEB) process used in the procurement of government contracts. This study was undertaken to (1) identify parts of the SEB process which are candidates for groupware supports; and (2) identify tools which could be used to support the candidate process. Two processes of the SEB were identified as good candidates for groupware support: (1) document generation - a coordination and communication process required to present and document the findings of an SEB; and (2) group decision making - a highly analytical and integrative decision process requiring a clear and supportable outcome.

Feasibility of multi-sector policy measures that create activity-friendly environments for children: results of a Delphi study.

PubMed

Aarts, Marie-Jeanne; Schuit, Albertine J; van de Goor, Ien Am; van Oers, Hans Am

2011-12-15

Although multi-sector policy is a promising strategy to create environments that stimulate physical activity among children, little is known about the feasibility of such a multi-sector policy approach. The aims of this study were: to identify a set of tangible (multi-sector) policy measures at the local level that address environmental characteristics related to physical activity among children; and to assess the feasibility of these measures, as perceived by local policy makers. In four Dutch municipalities, a Delphi study was conducted among local policy makers of different policy sectors (public health, sports, youth and education, spatial planning/public space, traffic and transportation, and safety). In the first Delphi round, respondents generated a list of possible policy measures addressing three environmental correlates of physical activity among children (social cohesion, accessibility of facilities, and traffic safety). In the second Delphi round, policy makers weighted different feasibility aspects (political feasibility, cultural/community acceptability, technical feasibility, cost feasibility, and legal feasibility) and assessed the feasibility of the policy measures derived from the first round. The third Delphi round was aimed at reaching consensus by feedback of group results. Finally, one overall feasibility score was calculated for each policy measure. Cultural/community acceptability, political feasibility, and cost feasibility were considered most important feasibility aspects. The Delphi studies yielded 16 feasible policy measures aimed at physical and social environmental correlates of physical activity among children. Less drastic policy measures were considered more feasible, whereas environmental policy measures were considered less feasible. This study showed that the Delphi technique can be a useful tool in reaching consensus about feasible multi-sector policy measures. The study yielded several feasible policy measures aimed at physical and social environmental correlates of physical activity among children and can assist local policy makers in designing multi-sector policies aimed at an activity-friendly environment for children.

Synthesis of silane and silicon in a non-equilibrium plasma jet

NASA Technical Reports Server (NTRS)

Calcote, H. F.; Felder, W.

1977-01-01

The feasibility of using a non-equilibrium hydrogen plasma jet as a chemical synthesis tool was investigated. Four possible processes were identified for further study: (1) production of polycrystalline silicon photovoltaic surfaces, (2) production of SiHCl3 from SiCl4, (3) production of SiH4 from SiHCl3, and (4) purification of SiCl4 by metal impurity nucleation. The most striking result was the recognition that the strongly adhering silicon films, amorphous or polycrystalline, produced in our studies could be the basis for preparing a photovoltaic surface directly; this process has potential advantages over other vapor deposition processes.

Silver halide sensitized gelatin process effects in holographic lenses recorded on Slavich PFG-01 plates

NASA Astrophysics Data System (ADS)

Collados, Maria Victoria; Arias, Isabel; García, Ana; Atencia, Jesús; Quintanilla, Manuel

2003-02-01

In this work we study the feasibility of using silver halide sensitized gelatin based on PFG-01 (Slavich) emulsions to construct uniaxial compound lenses. This processing is able to introduce variations in the thickness and refractive index of the emulsion. We prove that these changes are not sufficient to provide the observed variations in Bragg conditions in the reconstruction and that a shear-type effect must exist to explain the performance of processed emulsions. We study the characteristics of a compound lens, obtaining acceptable image quality, good resolution, and the typical field limitation of volume holographic elements.

[A Feasibility Study of closing the small bowel with high-frequency welding device].

PubMed

Zhou, Huabin; Han, Shuai; Chen, Jun; Huang, Dequn; Peng, Liang; Ning, Jingxuan; Li, Zhou

2014-12-01

This study aimed to evaluate the feasibility and effectiveness of closing the small bowel in an ex vivo porcine model with high-frequency welding device. A total of 100 porcine small bowels were divided into two groups, and then were closed with two different methods. The fifty small bowels in experimental group were closed by the high-frequency welding device, and the other fifty small bowels in comparison group were hand-sutured. All the small bowels were subjected to leak pressure testing later on. The speed of closure and bursting pressure were compared. The 50 porcine small bowels closed by the high-frequency welding device showed a success rate of 100%. Compared with the hand-sutured group, the bursting pressures of the former were significantly lower (P<0.01) and the closing process was significantly shorter (P<0.01). The pathological changes of the closed ends mainly presented as acute thermal and pressure induced injury. Experimental results show that the high-frequency welding device has higher feasibility in closing the small bowel.

Improved cost-effectiveness of the block co-polymer anneal process for DSA

NASA Astrophysics Data System (ADS)

Pathangi, Hari; Stokhof, Maarten; Knaepen, Werner; Vaid, Varun; Mallik, Arindam; Chan, Boon Teik; Vandenbroeck, Nadia; Maes, Jan Willem; Gronheid, Roel

2016-04-01

This manuscript first presents a cost model to compare the cost of ownership of DSA and SAQP for a typical front end of line (FEoL) line patterning exercise. Then, we proceed to a feasibility study of using a vertical furnace to batch anneal the block co-polymer for DSA applications. We show that the defect performance of such a batch anneal process is comparable to the process of record anneal methods. This helps in increasing the cost benefit for DSA compared to the conventional multiple patterning approaches.

Variational estimation of process parameters in a simplified atmospheric general circulation model

NASA Astrophysics Data System (ADS)

Lv, Guokun; Koehl, Armin; Stammer, Detlef

2016-04-01

Parameterizations are used to simulate effects of unresolved sub-grid-scale processes in current state-of-the-art climate model. The values of the process parameters, which determine the model's climatology, are usually manually adjusted to reduce the difference of model mean state to the observed climatology. This process requires detailed knowledge of the model and its parameterizations. In this work, a variational method was used to estimate process parameters in the Planet Simulator (PlaSim). The adjoint code was generated using automatic differentiation of the source code. Some hydrological processes were switched off to remove the influence of zero-order discontinuities. In addition, the nonlinearity of the model limits the feasible assimilation window to about 1day, which is too short to tune the model's climatology. To extend the feasible assimilation window, nudging terms for all state variables were added to the model's equations, which essentially suppress all unstable directions. In identical twin experiments, we found that the feasible assimilation window could be extended to over 1-year and accurate parameters could be retrieved. Although the nudging terms transform to a damping of the adjoint variables and therefore tend to erases the information of the data over time, assimilating climatological information is shown to provide sufficient information on the parameters. Moreover, the mechanism of this regularization is discussed.

Improved spatial resolution and lower-dose pediatric CT imaging: a feasibility study to evaluate narrowing the X-ray photon energy spectrum.

PubMed

Benz, Mark G; Benz, Matthew W; Birnbaum, Steven B; Chason, Eric; Sheldon, Brian W; McGuire, Dale

2014-08-01

This feasibility study has shown that improved spatial resolution and reduced radiation dose can be achieved in pediatric CT by narrowing the X-ray photon energy spectrum. This is done by placing a hafnium filter between the X-ray generator and a pediatric abdominal phantom. A CT system manufactured in 1999 that was in the process of being remanufactured was used as the platform for this study. This system had the advantage of easy access to the X-ray generator for modifications to change the X-ray photon energy spectrum; it also had the disadvantage of not employing the latest post-imaging noise reduction iterative reconstruction technology. Because we observed improvements after changing the X-ray photon energy spectrum, we recommend a future study combining this change with an optimized iterative reconstruction noise reduction technique.

Applied Research Study

NASA Technical Reports Server (NTRS)

Leach, Ronald J.

1997-01-01

The purpose of this project was to study the feasibility of reusing major components of a software system that had been used to control the operations of a spacecraft launched in the 1980s. The study was done in the context of a ground data processing system that was to be rehosted from a large mainframe to an inexpensive workstation. The study concluded that a systematic approach using inexpensive tools could aid in the reengineering process by identifying a set of certified reusable components. The study also developed procedures for determining duplicate versions of software, which were created because of inadequate naming conventions. Such procedures reduced reengineering costs by approximately 19.4 percent.

[Feasibility and Economic Analysis of Denitrification of Photovoltaic Wastewater Containing High Fluorine].

PubMed

Li, Xiang; Zhu, Liang; Huang, Yong; Yang, Peng-bing; Cui, Jian-hong; Ma, Hang

2016-04-15

In order to reduce acid and alkali dosing in wastewater treatment process of polycrystalline silicon by using denitrification after fluoride removal. This experiment studied the feasibility of first removing nitrogen using the denitrification process by start-up denitrifying reactor before fluoride removal. The results showed that the F⁻ concentration in the waste water to had a certain influence on the denitrification. When the concentration of F⁻ was controlled to about 750 mg · L⁻¹, the activity of denitrifying bacteria was not significantly influenced; when the concentration of F⁻ continued to increase, the denitrification efficiency of denitrifying sludge gradually reduced. In wastewater treatment of polycrystalline silicon, if the concentration of F⁻ was kept below 800 mg · L⁻¹, the denitrification performance of denitrifying sludge was not obviously affected. After 93 d operation, the total nitrogen in effluent was stabilized below 50 mg · L⁻¹, the total nitrogen removal efficiency reached 90%, and the removal rate reached 5 kg · (m³ · d)⁻¹. The calculation result showed, compared with the conventional denitrification process after fluoride removal, the proposed process could save about 70% of acid and 100% of alkali dosing, greatly reducing the cost of wastewater treatment.

76 FR 70152 - Pilot Program for Early Feasibility Study Investigational Device Exemption Applications

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-10

...] Pilot Program for Early Feasibility Study Investigational Device Exemption Applications AGENCY: Food and... feasibility study investigational device exemption (IDE) applications. The pilot program will conform to the... Feasibility Medical Device Clinical Studies, Including Certain First in Human (FIH) Studies.'' Under the pilot...

Implementing Routine Suicide Risk Screening for Psychiatric Outpatients With Serious Mental Disorders: I. Qualitative Results

PubMed Central

Lang, Michelle; Uttaro, Thomas; Caine, Eric; Carpinello, Sharon; Felton, Chip

2010-01-01

The objective of this study was to acquire process information, clinician and client feedback during implementation of a routine suicide risk screening program for outpatients with serious mental disorders. We studied implementation of a suicide-screening tool in a large public mental health outpatient facility in New York City. Most clinical staff who provided an opinion indicated screening was useful, feasible and helpful; most clients did not mind screening. Facilitators to program implementation included administrative support and ease of use. Barriers included consent, misperceptions, and concerns regarding potential liability. It is feasible to implement a suicide-screening tool in a public outpatient clinic. However, even experienced clinicians harbor unfounded myths. Effective large scale use will require vigorous training and oversight. PMID:19363752

Feasibility and Pilot Studies in Palliative Care Research: A Systematic Review.

PubMed

Jones, Terry A; Olds, Timothy S; Currow, David C; Williams, Marie T

2017-07-01

Feasibility and pilot study designs are common in palliative care research. Finding standard guidelines on the structure and reporting of these study types is difficult. In feasibility and pilot studies in palliative care research, to determine 1) how commonly a priori feasibility are criteria reported and whether results are subsequently reported against these criteria? and 2) how commonly are participants' views on acceptability of burden of the study protocol assessed? Four databases (OVID Medline, EMBASE, CINAHL, and PubMed via caresearch.com.au.) were searched. Search terms included palliative care, terminal care, advance care planning, hospice, pilot, feasibility, with a publication date between January 1, 2012 and December 31, 2013. Articles were selected and appraised by two independent reviewers. Fifty-six feasibility and/or pilot studies were included in this review. Only three studies had clear a priori criteria to measure success. Sixteen studies reported participant acceptability or burden with measures. Forty-eight studies concluded feasibility. The terms "feasibility" and "pilot" are used synonymously in palliative care research when describing studies that test for feasibility. Few studies in palliative care research outline clear criteria for success. The assessment of participant acceptability and burden is uncommon. A gold standard for feasibility study design in palliative care research that includes both clear criteria for success and testing of the study protocol for participant acceptability and burden is needed. Such a standard would assist with consistency in the design, conduct and reporting of feasibility and pilot studies. Copyright © 2017 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

PERFECTED enhanced recovery (PERFECT-ER) care versus standard acute care for patients admitted to acute settings with hip fracture identified as experiencing confusion: study protocol for a feasibility cluster randomized controlled trial.

PubMed

Hammond, Simon P; Cross, Jane L; Shepstone, Lee; Backhouse, Tamara; Henderson, Catherine; Poland, Fiona; Sims, Erika; MacLullich, Alasdair; Penhale, Bridget; Howard, Robert; Lambert, Nigel; Varley, Anna; Smith, Toby O; Sahota, Opinder; Donell, Simon; Patel, Martyn; Ballard, Clive; Young, John; Knapp, Martin; Jackson, Stephen; Waring, Justin; Leavey, Nick; Howard, Gregory; Fox, Chris

2017-12-04

Health and social care provision for an ageing population is a global priority. Provision for those with dementia and hip fracture has specific and growing importance. Older people who break their hip are recognised as exceptionally vulnerable to experiencing confusion (including but not exclusively, dementia and/or delirium and/or cognitive impairment(s)) before, during or after acute admissions. Older people experiencing hip fracture and confusion risk serious complications, linked to delayed recovery and higher mortality post-operatively. Specific care pathways acknowledging the differences in patient presentation and care needs are proposed to improve clinical and process outcomes. This protocol describes a multi-centre, feasibility, cluster-randomised, controlled trial (CRCT) to be undertaken across ten National Health Service hospital trusts in the UK. The trial will explore the feasibility of undertaking a CRCT comparing the multicomponent PERFECTED enhanced recovery intervention (PERFECT-ER), which acknowledges the differences in care needs of confused older patients experiencing hip fracture, with standard care. The trial will also have an integrated process evaluation to explore how PERFECT-ER is implemented and interacts with the local context. The study will recruit 400 hip fracture patients identified as experiencing confusion and will also recruit "suitable informants" (individuals in regular contact with participants who will complete proxy measures). We will also recruit NHS professionals for the process evaluation. This mixed methods design will produce data to inform a definitive evaluation of the intervention via a large-scale pragmatic randomised controlled trial (RCT). The trial will provide a preliminary estimate of potential efficacy of PERFECT-ER versus standard care; assess service delivery variation, inform primary and secondary outcome selection, generate estimates of recruitment and retention rates, data collection difficulties, and completeness of outcome data and provide an indication of potential economic benefits. The process evaluation will enhance knowledge of implementation delivery and receipt. ISRCTN, 99336264 . Registered on 5 September 2016.

Perceptions among general medical practitioners toward implementation of medication reconciliation program for patients discharged from hospitals in Penang, Malaysia.

PubMed

Hassali, Mohamed Azmi Ahmad; Al-Haddad, Mahmoud; Shafie, Asrul Akmal; Tangiisuran, Balamurugan; Saleem, Fahad; Atif, Muhammad; Al-Qazaz, Harith

2012-06-01

This study aims to explore the perceptions of general practitioners (GPs) from the state of Penang toward the feasibility of implementing the medication reconciliation program in Malaysia. A cross-sectional descriptive study using a validated, self-completed anonymous 18-item questionnaire was undertaken over a period of 2 months in 2010. The study was conducted in the state of Penang, Malaysia. A letter consisting of survey questionnaires and prepaid return envelope were mailed to 429 GPs identified from the Private Medical Practice Control Department Registry. A total of 86 responses were received with response rate of 20.1%. Majority (90.1%) of the respondents agreed that medication reconciliation can be a feasible strategy to improve medication safety, and 97.7% confirmed that having an accurate up-to-date list of the patient's previous medication will be useful in the rational prescribing process. However, about half (56.9%) of them felt that standardization of the medication reconciliation process in all clinics will be difficult to achieve. Three quarters (73.2%) of the respondents believed that the involvement of GPs alone is insufficient, and 74.5% agreed that this program should be expanded to community pharmacy setting. More than 90% of the respondents agreed upon the medication reconciliation card proposed by the researchers. General practitioners in Penang are generally in favor of the implementation of medication reconciliation program in their practice. Because medication reconciliation has been shown to reduce many medicine-related problems, it is thus worth considering the feasibility of nationwide implementation of such program.

Sustainability of an Integrated Adventure-Based Training and Health Education Program to Enhance Quality of Life Among Chinese Childhood Cancer Survivors: A Randomized Controlled Trial.

PubMed

Chung, Oi Kwan Joyce; Li, Ho Cheung William; Chiu, Sau Ying; Ho, Ka Yan; Lopez, Violeta

2015-01-01

Physical activity is of paramount importance to enhance the quality of life of childhood cancer survivors. The objectives of this study were to examine the sustainability, feasibility, and acceptability of an adventure-based training and health education program in changing the exercise behavior and enhancing the physical activity levels, self-efficacy, and quality of life of childhood cancer survivors. A follow-up study (12 and 18 months) of a previous study was conducted. Participants in the experimental group (n = 33) joined a 4-day integrated adventure-based training and health education program. The control group (n = 36) received the standard medical care. Changes in exercise behavior, levels of physical activity, self-efficacy, and quality of life were assessed from the time of recruitment, and at 12 and 18 months after starting the intervention. Process evaluation was conducted to determine whether the program was feasible and acceptable to participants. From baseline to 18 months after the intervention, the experimental group reported statistically significant differences in the stages of change in physical activity and higher levels of physical activity, self-efficacy, and quality of life than did the control group. The results of process evaluation revealed that the program was both feasible and acceptable to participants. The program was found to have substantial effects on enhancing the physical activity levels, self-efficacy, and quality of life of childhood cancer survivors over at least 18 months. Healthcare professionals should consider adopting such programs to promote the regular physical activity among childhood cancer survivors.

Program for the feasibility of developing a high pressure acoustic levitator

NASA Technical Reports Server (NTRS)

Rey, Charles A.; Merkley, Dennis R.; Hammarlund, Gregory R.

1988-01-01

This is the final report for the program for the feasibility of developing a high-pressure acoustic levitator (HPAL). It includes work performed during the period from February 15, 1987 to October 26, 1987. The program was conducted for NASA under contract number NAS3-25115. The HPAL would be used for containerless processing of materials in the 1-g Earth environment. Results show that the use of increased gas pressure produces higher sound pressure levels. The harmonics produced by the acoustic source are also reduced. This provides an improvement in the capabilities of acoustic levitation in 1-g. The reported processing capabilities are directly limited by the design of the Medium Pressure Acoustic Levitator used for this study. Data show that sufficient acoustic intensities can be obtained to levitate and process a specimen of density 5 g/cu cm at 1500 C. However, it is recommended that a working engineering model of the HPAL be developed. The model would be used to establish the maximum operating parameters of furnace temperature and sample density.

Systems Analysis of Physical Absorption of CO2 in Ionic Liquids for Pre-Combustion Carbon Capture.

PubMed

Zhai, Haibo; Rubin, Edward S

2018-04-17

This study develops an integrated technical and economic modeling framework to investigate the feasibility of ionic liquids (ILs) for precombustion carbon capture. The IL 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide is modeled as a potential physical solvent for CO 2 capture at integrated gasification combined cycle (IGCC) power plants. The analysis reveals that the energy penalty of the IL-based capture system comes mainly from the process and product streams compression and solvent pumping, while the major capital cost components are the compressors and absorbers. On the basis of the plant-level analysis, the cost of CO 2 avoided by the IL-based capture and storage system is estimated to be $63 per tonne of CO 2 . Technical and economic comparisons between IL- and Selexol-based capture systems at the plant level show that an IL-based system could be a feasible option for CO 2 capture. Improving the CO 2 solubility of ILs can simplify the capture process configuration and lower the process energy and cost penalties to further enhance the viability of this technology.

Optimization applications in aircraft engine design and test

NASA Technical Reports Server (NTRS)

Pratt, T. K.

1984-01-01

Starting with the NASA-sponsored STAEBL program, optimization methods based primarily upon the versatile program COPES/CONMIN were introduced over the past few years to a broad spectrum of engineering problems in structural optimization, engine design, engine test, and more recently, manufacturing processes. By automating design and testing processes, many repetitive and costly trade-off studies have been replaced by optimization procedures. Rather than taking engineers and designers out of the loop, optimization has, in fact, put them more in control by providing sophisticated search techniques. The ultimate decision whether to accept or reject an optimal feasible design still rests with the analyst. Feedback obtained from this decision process has been invaluable since it can be incorporated into the optimization procedure to make it more intelligent. On several occasions, optimization procedures have produced novel designs, such as the nonsymmetric placement of rotor case stiffener rings, not anticipated by engineering designers. In another case, a particularly difficult resonance contraint could not be satisfied using hand iterations for a compressor blade, when the STAEBL program was applied to the problem, a feasible solution was obtained in just two iterations.

Bioethanol fermentation as alternative valorization route of agricultural digestate according to a biorefinery approach.

PubMed

Sambusiti, C; Monlau, F; Barakat, A

2016-07-01

This study investigates the feasibility of producing bioethanol from solid digestate after a mechanical fractionation (i.e. centrifugal milling), in order to improve the energy recovery from agricultural wastes and the sustainability of anaerobic digestion plants. A bioethanol yield of 37gkg(-1)TS was evaluated for the solid digestate fraction. Mass and energetic balances were performed and compared between two scenarios: (A) one-stage bioethanol fermentation and (B) two-stage anaerobic digestion-bioethanol fermentation, in order to evaluate the feasibility and the advantages of the two-stage process. Results revealed that, compared to the one-stage process, the dual anaerobic digestion-bioethanol process permitted: (i) to diversify biofuels production; (ii) to provide the thermal energy sufficient for drying digestate (13,351kWhthday(-1)), for the subsequent milling step; (iii) to reduce the electric energy requirement for the milling step (from 23,880 to 3580kWhelday(-1)); (iv) to produce extra electrical energy of 8483kWhelday(-1); (v) to improve the reduction of waste streams generated (from 13% to 54% of organic matter removal). Copyright © 2016. Published by Elsevier Ltd.

The effect of carbon as an energy source for biological denitrification through Pseudomonas stutzeri.

PubMed

Shivran, Hari Singh; Kumar, S; Kumar, Dinesh; Singh, R V

2005-04-01

The biological denitrification processes possess many advantages in comparison to other denitrification processes. The present study was undertaken to observe the effect of quantity of carbon on biological denitrification with Pseudomonas stutzeri at different C/N ratios. The results obtained in the present investigations show that the pH and alkalinity of the effluent increased with increase in C/N ratio due to alkalinity generated during denitrification. The COD of the influent was increased with increase in C/N ratio. The effluent COD was nil under pseudo-steady state condition up to the C/N ratio of 2.5. Above this C/N ratio, the organics started entering in the treated water. The maximum feasible economic reduction of NO(3-)N from 51.6 mg/l to 1.2 mg/l occurred at C/N ratio of 2.5 and the obtained concentration of NO(3-)N was found to be lower than the tolerance limit (10 mg/l) prescribed by the WHO. The present work provides a feasible approach for a more efficient NO(3-)N removal process.

A novel surrogate-based approach for optimal design of electromagnetic-based circuits

NASA Astrophysics Data System (ADS)

Hassan, Abdel-Karim S. O.; Mohamed, Ahmed S. A.; Rabie, Azza A.; Etman, Ahmed S.

2016-02-01

A new geometric design centring approach for optimal design of central processing unit-intensive electromagnetic (EM)-based circuits is introduced. The approach uses norms related to the probability distribution of the circuit parameters to find distances from a point to the feasible region boundaries by solving nonlinear optimization problems. Based on these normed distances, the design centring problem is formulated as a max-min optimization problem. A convergent iterative boundary search technique is exploited to find the normed distances. To alleviate the computation cost associated with the EM-based circuits design cycle, space-mapping (SM) surrogates are used to create a sequence of iteratively updated feasible region approximations. In each SM feasible region approximation, the centring process using normed distances is implemented, leading to a better centre point. The process is repeated until a final design centre is attained. Practical examples are given to show the effectiveness of the new design centring method for EM-based circuits.

A feasibility study investigating the acceptability and design of a multicentre randomised controlled trial of needle fasciotomy versus limited fasciectomy for the treatment of Dupuytren's contractures of the fingers (HAND-1): study protocol for a randomised controlled trial.

PubMed

Harrison, Eleanor; Tan, Wei; Mills, Nicola; Karantana, Alexia; Sprange, Kirsty; Duley, Lelia; Elliott, Daisy; Blazeby, Jane; Hollingworth, William; Montgomery, Alan A; Davis, Tim

2017-08-25

Dupuytren's contractures are fibrous cords under the skin of the palm of the hand. The contractures are painless but cause one or more fingers to curl into the palm, resulting in loss of function. Standard treatment within the NHS is surgery to remove (fasciectomy) or divide (fasciotomy) the contractures, and the treatment offered is frequently determined by surgeon preference. This study aims to determine the feasibility of conducting a large, multicentre randomised controlled trial to assess the clinical and cost-effectiveness of needle fasciotomy versus limited fasciectomy for the treatment of Dupuytren's contracture. HAND-1 is a parallel, two-arm, multicentre, randomised feasibility trial. Eligible patients aged 18 years or over who have one or more fingers with a Dupuytren's contracture of more than 30° in the metacarpophalangeal (MCP) and/or proximal interphalangeal (PIP) joints, well-defined cord(s) causing contracture, and have not undergone previous surgery for Dupuytren's on the same hand will be randomised (1:1) to treatment with either needle fasciotomy or limited fasciectomy. Participants will be followed-up for up to 6 months post surgery. Feasibility outcomes include number of patients screened, consented and randomised, adherence with treatment, completion of follow-up and identification of an appropriate patient-reported outcome measure (PROM) to use as primary outcome for a main trial. Embedded qualitative research, incorporating a QuinteT Recruitment Intervention, will focus on understanding and optimising the recruitment process, and exploring patients' experiences of trial participation and the interventions. This study will assess whether a large multicentre trial comparing the clinical and cost-effectiveness of needle fasciotomy and limited fasciectomy for the treatment of Dupuytren's contractures is feasible, and if so will provide data to inform its design and successful conduct. International Standard Registered Clinical/soCial sTudy Number: ISRCTN11164292 . Registered on 28 August 2015.

Feasibility of a cohort study on health risks caused by occupational exposure to radiofrequency electromagnetic fields

PubMed Central

2009-01-01

Background The aim of this study was to examine the feasibility of performing a cohort study on health risks from occupational exposure to radiofrequency electromagnetic fields (RF-EMF) in Germany. Methods A set of criteria was developed to evaluate the feasibility of such a cohort study. The criteria aimed at conditions of exposure and exposure assessment (level, duration, preferably on an individual basis), the possibility to assemble a cohort and the feasibility of ascertaining various disease endpoints. Results Twenty occupational settings with workers potentially exposed to RF-EMF and, in addition, a cohort of amateur radio operators were considered. Based on expert ratings, literature reviews and our set of predefined criteria, three of the cohorts were identified as promising for further evaluation: the personnel (technicians) of medium/short wave broadcasting stations, amateur radio operators, and workers on dielectric heat sealers. After further analyses, the cohort of workers on dielectric heat sealers seems not to be feasible due to the small number of exposed workers available and to the difficulty of assessing exposure (exposure depends heavily on the respective working process and mixture of exposures, e.g. plastic vapours), although exposure was highest in this occupational setting. The advantage of the cohort of amateur radio operators was the large number of persons it includes, while the advantage of the cohort of personnel working at broadcasting stations was the quality of retrospective exposure assessment. However, in the cohort of amateur radio operators the exposure assessment was limited, and the cohort of technicians was hampered by the small number of persons working in this profession. Conclusion The majority of occupational groups exposed to RF-EMF are not practicable for setting up an occupational cohort study due to the small numbers of exposed subjects or due to exposure levels being only marginally higher than those of the general public. PMID:19480652

Waste management in the meat processing industry: Conversion of paunch and DAF sludge into solid fuel.

PubMed

Hamawand, Ihsan; Pittaway, Pam; Lewis, Larry; Chakrabarty, Sayan; Caldwell, Justin; Eberhard, Jochen; Chakraborty, Arpita

2017-02-01

This article addresses the novel dewatering process of immersion-frying of paunch and dissolved air flotation (DAF) sludge to produce high energy pellets. Literature have been analysed to address the feasibility of replacing conventional boiler fuel at meat processing facilities with high energy paunch-DAF sludge pellets (capsules). The value proposition of pelleting and frying this mixture into energy pellets is based on a Cost-Benefit Analysis (CBA). The CBA is based on information derived from the literature and consultation with the Australian Meat Processing Industry. The calorific properties of a mixture of paunch cake solids and DAF sludge were predicted from literature and industry consultation to validate the product. This study shows that the concept of pelletizing and frying paunch is economically feasible. The complete frying and dewatering of the paunch and DAF sludge mixture produces pellets with energy content per kilogram equivalent to coal. The estimated cost of this new product is half the price of coal and the payback period is estimated to be between 1.8 and 3.2years. Further research is required for proof of concept, and to identify the technical challenges associated with integrating this technology into existing meat processing plants. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

Anaerobic digestion of post-hydrothermal liquefaction wastewater for improved energy efficiency of hydrothermal bioenergy processes.

PubMed

Zhou, Yan; Schideman, Lance; Zheng, Mingxia; Martin-Ryals, Ana; Li, Peng; Tommaso, Giovana; Zhang, Yuanhui

2015-01-01

Hydrothermal liquefaction (HTL) is a promising process for converting wet biomass and organic wastes into bio-crude oil. It also produces an aqueous product referred to as post-hydrothermal liquefaction wastewater (PHWW) containing up to 40% of the original feedstock carbon, which reduces the overall energy efficiency of the HTL process. This study investigated the feasibility of using anaerobic digestion (AD) to treat PHWW, with the aid of activated carbon. Results showed that successful AD occurred at relatively low concentrations of PHWW (≤ 6.7%), producing a biogas yield of 0.5 ml/mg CODremoved, and ∼53% energy recovery efficiency. Higher concentrations of PHWW (≥13.3%) had an inhibitory effect on the AD process, as indicated by delayed, slower, or no biogas production. Activated carbon was shown to effectively mitigate this inhibitory effect by enhancing biogas production and allowing digestion to proceed at higher PHWW concentrations (up to 33.3%), likely due to sequestering toxic organic compounds. The addition of activated carbon also increased the net energy recovery efficiency of AD with a relatively high concentration of PHWW (33.3%), taking into account the energy for producing activated carbon. These results suggest that AD is a feasible approach to treat PHWW, and to improve the energy efficiency of the HTL processes.

Professional Training for TRADOC Environmental and Natural Resource Professionals. Volume 1. A Feasibility Study and Concept Plan for a University Without Walls

DTIC Science & Technology

1991-05-01

Overview of Environmental Laws and Regulations 24 NEPA Process and Environmental Audit and Assessment 27 Air Emissions 27 Hazardous Materials...25 5 Overview of Environmental Laws and Regulations Training-U.S. Army Context Training 26 6 NEPA Review Process and Environmental Audit and...and environmental audit /assessment 4. Air emissions 5. Hazardous materials and waste management a. Polychlorinated biphenyls (PCBs) b. Petroleum, oil

Feasibility study: Liquid hydrogen plant, 30 tons per day

NASA Technical Reports Server (NTRS)

1975-01-01

The design considerations of the plant are discussed in detail along with management planning, objective schedules, and cost estimates. The processing scheme is aimed at ultimate use of coal as the basic raw material. For back-up, and to provide assurance of a dependable and steady supply of hydrogen, a parallel and redundant facility for gasifying heavy residual oil will be installed. Both the coal and residual oil gasifiers will use the partial oxidation process.

Automated array assembly task, phase 1

NASA Technical Reports Server (NTRS)

Carbajal, B. G.

1977-01-01

State-of-the-art technologies applicable to silicon solar cell and solar cell module fabrication were assessed. The assessment consisted of a technical feasibility evaluation and a cost projection for high volume production of solar cell modules. Design equations based on minimum power loss were used as a tool in the evaluation of metallization technologies. A solar cell process sensitivity study using models, computer calculations, and experimental data was used to identify process step variation and cell output variation correlations.

Feasibility of Supersonic Aircraft Concepts for Low-Boom and Flight Trim Constraints

NASA Technical Reports Server (NTRS)

Li, Wu

2015-01-01

This paper documents a process for analyzing whether a particular supersonic aircraft configuration layout and a given cruise condition are feasible to achieve a trimmed low-boom design. This process was motivated by the need to know whether a particular configuration at a given cruise condition could be reshaped to satisfy both low-boom and flight trim constraints. Without such a process, much effort could be wasted on shaping a configuration layout at a cruise condition that could never satisfy both low-boom and flight trim constraints simultaneously. The process helps to exclude infeasible configuration layouts with minimum effort and allows a designer to develop trimmed low-boom concepts more effectively. A notional low-boom supersonic demonstrator concept is used to illustrate the analysis/design process.

Analytical modeling and feasibility study of a multi-GPU cloud-based server (MGCS) framework for non-voxel-based dose calculations.

PubMed

Neylon, J; Min, Y; Kupelian, P; Low, D A; Santhanam, A

2017-04-01

In this paper, a multi-GPU cloud-based server (MGCS) framework is presented for dose calculations, exploring the feasibility of remote computing power for parallelization and acceleration of computationally and time intensive radiotherapy tasks in moving toward online adaptive therapies. An analytical model was developed to estimate theoretical MGCS performance acceleration and intelligently determine workload distribution. Numerical studies were performed with a computing setup of 14 GPUs distributed over 4 servers interconnected by a 1 Gigabits per second (Gbps) network. Inter-process communication methods were optimized to facilitate resource distribution and minimize data transfers over the server interconnect. The analytically predicted computation time predicted matched experimentally observations within 1-5 %. MGCS performance approached a theoretical limit of acceleration proportional to the number of GPUs utilized when computational tasks far outweighed memory operations. The MGCS implementation reproduced ground-truth dose computations with negligible differences, by distributing the work among several processes and implemented optimization strategies. The results showed that a cloud-based computation engine was a feasible solution for enabling clinics to make use of fast dose calculations for advanced treatment planning and adaptive radiotherapy. The cloud-based system was able to exceed the performance of a local machine even for optimized calculations, and provided significant acceleration for computationally intensive tasks. Such a framework can provide access to advanced technology and computational methods to many clinics, providing an avenue for standardization across institutions without the requirements of purchasing, maintaining, and continually updating hardware.

Synergies of solar energy use in the desalination of seawater: A case study in northern Chile

NASA Astrophysics Data System (ADS)

Servert, Jorge F.; Cerrajero, Eduardo; Fuentealba, Edward L.

2016-05-01

The mining industry is a great consumer of water for hydrometallurgical processes. Despite the efforts in minimizing the use of fresh water through reuse, recycling and process intensification, water demand for mining is expected to rise a 40% from 2013 to 2020. For seawater to be an alternative to groundwater, it must be pumped up to the mine (thousands of meters uphill) and desalinated. These processes require intensive energy and investment in desalination and piping/pumping facilities. A conventional solution for this process would be desalination by reverse osmosis at sea level, powered by electricity from the grid, and further pumping of the desalinated water uphill. This paper compares the feasibility of two solar technologies versus the "conventional" option. LCOW (Levelized Cost of Water) was used as a comparative indicator among the studied solutions, with values for a lifetime of 10, 15, 20 and 25 years, calculated using a real discount rate equal to 12%. The LCOW is lower in all cases for the RO + grid solution. The cost of desalination, ignoring the contribution of pumping, is similar for the three technologies from twenty years of operation. The use of solar energy to desalinate sea water for consumption in the mines of the Atacama region is technically feasible. However, due to the extra costs from pumping whole seawater, and not just the desalinated water, solar solutions are less competitive than the conventional process.

Defining Feasibility and Pilot Studies in Preparation for Randomised Controlled Trials: Development of a Conceptual Framework.

PubMed

Eldridge, Sandra M; Lancaster, Gillian A; Campbell, Michael J; Thabane, Lehana; Hopewell, Sally; Coleman, Claire L; Bond, Christine M

2016-01-01

We describe a framework for defining pilot and feasibility studies focusing on studies conducted in preparation for a randomised controlled trial. To develop the framework, we undertook a Delphi survey; ran an open meeting at a trial methodology conference; conducted a review of definitions outside the health research context; consulted experts at an international consensus meeting; and reviewed 27 empirical pilot or feasibility studies. We initially adopted mutually exclusive definitions of pilot and feasibility studies. However, some Delphi survey respondents and the majority of open meeting attendees disagreed with the idea of mutually exclusive definitions. Their viewpoint was supported by definitions outside the health research context, the use of the terms 'pilot' and 'feasibility' in the literature, and participants at the international consensus meeting. In our framework, pilot studies are a subset of feasibility studies, rather than the two being mutually exclusive. A feasibility study asks whether something can be done, should we proceed with it, and if so, how. A pilot study asks the same questions but also has a specific design feature: in a pilot study a future study, or part of a future study, is conducted on a smaller scale. We suggest that to facilitate their identification, these studies should be clearly identified using the terms 'feasibility' or 'pilot' as appropriate. This should include feasibility studies that are largely qualitative; we found these difficult to identify in electronic searches because researchers rarely used the term 'feasibility' in the title or abstract of such studies. Investigators should also report appropriate objectives and methods related to feasibility; and give clear confirmation that their study is in preparation for a future randomised controlled trial designed to assess the effect of an intervention.

Field Supervisor Perspectives on Evidence-Based Practice: Familiarity, Feasibility, and Implementation

ERIC Educational Resources Information Center

Heffernan, Kristin; Dauenhauer, Jason

2017-01-01

The Council on Social Work Education has designated field education as social work's signature pedagogy, putting field supervisors in a key role of preparing students as competent social workers. This study examined field supervisors' Evidence Based Practice (EBP) behaviors using a modified version of the Evidence-Based Practice Process Assessment…

POTENTIAL FOR INVASION OF UNDERGROUND SOURCES OF DRINKING WATER THROUGH MUD-PLUGGED WELLS: AN EXPERIMENTAL APPRAISAL

EPA Science Inventory

The main objective of the feasibility study described here was to test the hypothesis that properly plugged wells are effectively sealed by drilling mud. In The process of testing the hypothesis, evidence about dynamics of building mud cake on the wellbore-face was obtained, as ...

Experiences in Rural Mental Health. V: Creating Alternatives to Clinical Care.

ERIC Educational Resources Information Center

Hollister, William G.; And Others

Based on a North Carolina feasibility study (1967-73) which focused on development of a pattern for providing comprehensive mental health services to rural people, this guide deals with the process of creating alternatives to clinical care in Vance and Franklin counties. Specifically, this booklet details the chronological development of the…

Multi-Purpose Tests: A Solution to Test Proliferation.

ERIC Educational Resources Information Center

Holmes, Susan E.

This research, conducted for California State Department of Education, is one component of a feasibility study focusing on ways to make the testing process more efficient by application of multi-purpose tests (MPT). MPT are designed, administered and scored to serve more than one purpose and to consolidate and unify testing programs as a partial…

100-B/C Target Analyte List Development for Soil

DOE Office of Scientific and Technical Information (OSTI.GOV)

R.W. Ovink

2010-03-18

This report documents the process used to identify source area target analytes in support of the 100-B/C remedial investigation/feasibility study addendum to DOE/RL-2008-46. This report also establishes the analyte exclusion criteria applicable for 100-B/C use and the analytical methods needed to analyze the target analytes.

Quantitative and Qualitative Processes of Change during Staff-Coaching Sessions: An Exploratory Study

ERIC Educational Resources Information Center

van Oorsouw, Wietske M. W. J.; Embregts, Petri J. C. M.; Bosman, Anna M. T.

2013-01-01

Staff training is one of the interventions that managers can embed in their organizations to help staff improve their professional competences related to challenging behaviour of clients with intellectual disabilities. Individual coaching adds learning opportunities that are feasible but difficult to achieve in an in-service setting. In the…

Accounting for Advanced High School Coursework in College Admission Decisions

ERIC Educational Resources Information Center

Sadler, Philip M.; Tai, Robert H.

2007-01-01

The purpose of the current study is to investigate the feasibility of accounting for student performance in advanced high school coursework through the adjustment of high school grade point average (HSGPA) while separating out variables that are independently considered in the admission process, e.g., SAT/ACT scores, community affluence, type of…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allgood, Tiffany L.; Sorter, Andy

The Coeur d'Alene Tribe's Energy Efficiency Feasibility Study (EEFS) is the culminating document that compiles the energy efficiency and building performance assessment and project prioritization process completed on 36 Tribally owned and operated facilities within Tribal lands. The EEFS contains sections on initial findings, utility billing analyses, energy conservation measures and prioritization and funding sources and strategies for energy project implementation.

Active Ingredients for an Embedded Intervention within the Early Childhood Classroom

ERIC Educational Resources Information Center

Blackwell, Angela Labrie; Dunn, Winnie

2016-01-01

As public education moves toward a tiered model of intervention (Response to Intervention), occupational therapists need to understand how to effectively implement interventions at each tier. The purpose of this article is to report about a process of examining teacher-therapist meeting transcripts from a feasibility study to find the active…

Implementation of Positive Behavior Support with a Sibling Set in a Home Environment

ERIC Educational Resources Information Center

Duda, Michelle A.; Clarke, Shelley; Fox, Lise; Dunlap, Glen

2008-01-01

This study provides a demonstration of the process of positive behavior support (PBS) within a home setting to address the challenging behavior of a sibling set within family routines. Although a growing data base is demonstrating the feasibility and effectiveness of conducting functional behavioral assessment and implementing assessment-based…

Feasibility of implementing molecular-guided therapy for the treatment of patients with relapsed or refractory neuroblastoma

PubMed Central

Saulnier Sholler, Giselle L; Bond, Jeffrey P; Bergendahl, Genevieve; Dutta, Akshita; Dragon, Julie; Neville, Kathleen; Ferguson, William; Roberts, William; Eslin, Don; Kraveka, Jacqueline; Kaplan, Joel; Mitchell, Deanna; Parikh, Nehal; Merchant, Melinda; Ashikaga, Takamaru; Hanna, Gina; Lescault, Pamela Jean; Siniard, Ashley; Corneveaux, Jason; Huentelman, Matthew; Trent, Jeffrey

2015-01-01

The primary objective of the study was to evaluate the feasibility and safety of a process which would utilize genome-wide expression data from tumor biopsies to support individualized treatment decisions. Current treatment options for recurrent neuroblastoma are limited and ineffective, with a survival rate of <10%. Molecular profiling may provide data which will enable the practitioner to select the most appropriate therapeutic option for individual patients, thus improving outcomes. Sixteen patients with neuroblastoma were enrolled of which fourteen were eligible for this study. Feasibility was defined as completion of tumor biopsy, pathological evaluation, RNA quality control, gene expression profiling, bioinformatics analysis, generation of a drug prediction report, molecular tumor board yielding a treatment plan, independent medical monitor review, and treatment initiation within a 21 day period. All eligible biopsies passed histopathology and RNA quality control. Expression profiling by microarray and RNA sequencing were mutually validated. The average time from biopsy to report generation was 5.9 days and from biopsy to initiation of treatment was 12.4 days. No serious adverse events were observed and all adverse events were expected. Clinical benefit was seen in 64% of patients as stabilization of disease for at least one cycle of therapy or partial response. The overall response rate was 7% and the progression free survival was 59 days. This study demonstrates the feasibility and safety of performing real-time genomic profiling to guide treatment decision making for pediatric neuroblastoma patients. PMID:25720842

An automated approach to mapping corn from Landsat imagery

USGS Publications Warehouse

Maxwell, S.K.; Nuckols, J.R.; Ward, M.H.; Hoffer, R.M.

2004-01-01

Most land cover maps generated from Landsat imagery involve classification of a wide variety of land cover types, whereas some studies may only need spatial information on a single cover type. For example, we required a map of corn in order to estimate exposure to agricultural chemicals for an environmental epidemiology study. Traditional classification techniques, which require the collection and processing of costly ground reference data, were not feasible for our application because of the large number of images to be analyzed. We present a new method that has the potential to automate the classification of corn from Landsat satellite imagery, resulting in a more timely product for applications covering large geographical regions. Our approach uses readily available agricultural areal estimates to enable automation of the classification process resulting in a map identifying land cover as ‘highly likely corn,’ ‘likely corn’ or ‘unlikely corn.’ To demonstrate the feasibility of this approach, we produced a map consisting of the three corn likelihood classes using a Landsat image in south central Nebraska. Overall classification accuracy of the map was 92.2% when compared to ground reference data.

CURE: Clean use of reactor energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1990-05-01

This paper presents the results of a joint Westinghouse Hanford Company (Westinghouse Hanford)-Pacific Northwest Laboratory (PNL) study that considered the feasibility of treating radioactive waste before disposal to reduce the inventory of long-lived radionuclides, making the waste more suitable for geologic disposal. The treatment considered here is one in which waste would be chemically separated so that long-lived radionuclides can be treated using specific processes appropriate for the nuclide. The technical feasibility of enhancing repository performance by this type of treatment is considered in this report. A joint Westinghouse Hanford-PNL study group developed a concept called the Clean Use ofmore » Reactor Energy (CURE), and evaluated the potential of current technology to reduce the long-lived radionuclide content in waste from the nuclear power industry. The CURE process consists of three components: chemical separation of elements that have significant quantities of long-lived radioisotopes in the waste, exposure in a neutron flux to transmute the radioisotopes to stable nuclides, and packaging of radionuclides that cannot be transmuted easily for storage or geologic disposal. 76 refs., 32 figs., 24 tabs.« less

[TANDEM (TAsk force oN long Duration unemployment of Elderly People and Mental health) implementation of a cross-institutional pilot project for elderly long-term unemployed persons - presentation of the project procedure and the utilisation].

PubMed

Steil, C; Meiler, B; Wiesten, I; Wiltfang, J; Kis, B

2013-08-01

The aim of this study is to implement and examine the feasibility of a cross-institutional mental health intervention to comprehend and advance mental health of elderly long-term unemployed persons. Report on the procedure and on the observational study utilisation in a 14-month period. The structure and processes chosen could be implemented into practice successfully. Utilisation was high but 30% dropped out during the procedure. Of the unemployed persons surveyed, 96% received a psychiatric diagnosis. 85% were not having psychiatric treatment. The method chosen is feasible and was accepted by the target group. Project structure and processes proved to be applicable for the implementation of the project aims. The method chosen reaches an up to now "psychiatry-inexperienced" target group characterised by frequent incidence of mental disorders and low utilisation of psychiatric care. Thus, vocational reintegration programmes should be supported by psychiatric services. © Georg Thieme Verlag KG Stuttgart · New York.

Feasibility study for the implementation of NASTRAN on the ILLIAC 4 parallel processor

NASA Technical Reports Server (NTRS)

Field, E. I.

1975-01-01

The ILLIAC IV, a fourth generation multiprocessor using parallel processing hardware concepts, is operational at Moffett Field, California. Its capability to excel at matrix manipulation, makes the ILLIAC well suited for performing structural analyses using the finite element displacement method. The feasibility of modifying the NASTRAN (NASA structural analysis) computer program to make effective use of the ILLIAC IV was investigated. The characteristics are summarized of the ILLIAC and the ARPANET, a telecommunications network which spans the continent making the ILLIAC accessible to nearly all major industrial centers in the United States. Two distinct approaches are studied: retaining NASTRAN as it now operates on many of the host computers of the ARPANET to process the input and output while using the ILLIAC only for the major computational tasks, and installing NASTRAN to operate entirely in the ILLIAC environment. Though both alternatives offer similar and significant increases in computational speed over modern third generation processors, the full installation of NASTRAN on the ILLIAC is recommended. Specifications are presented for performing that task with manpower estimates and schedules to correspond.

77 FR 13343 - Pilot Program for Early Feasibility Study Investigational Device Exemption Applications...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-06

...] Pilot Program for Early Feasibility Study Investigational Device Exemption Applications; Termination of... acceptance of nominations for the Early Feasibility Study Investigational Device Exemption (IDE) Applications... technologies to participate in a pilot program for early feasibility study IDE applications. FDA is also...

25 CFR 41.7 - Feasibility studies.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Feasibility studies. 41.7 Section 41.7 Indians BUREAU OF... NAVAJO COMMUNITY COLLEGE Tribally Controlled Community Colleges § 41.7 Feasibility studies. (a) Grants... initiate a feasibility study to determine whether there is justification to encourage and maintain a...

25 CFR 41.7 - Feasibility studies.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false Feasibility studies. 41.7 Section 41.7 Indians BUREAU OF... NAVAJO COMMUNITY COLLEGE Tribally Controlled Community Colleges § 41.7 Feasibility studies. (a) Grants... initiate a feasibility study to determine whether there is justification to encourage and maintain a...

Movement as Medicine for Type 2 Diabetes: protocol for an open pilot study and external pilot clustered randomised controlled trial to assess acceptability, feasibility and fidelity of a multifaceted behavioural intervention targeting physical activity in primary care.

PubMed

Avery, Leah; Sniehotta, Falko F; Denton, Sarah J; Steen, Nick; McColl, Elaine; Taylor, Roy; Trenell, Michael I

2014-02-03

Physical activity (PA) and nutrition are the cornerstones of diabetes management. Several reviews and meta-analyses report that PA independently produces clinically important improvements in glucose control in people with Type 2 diabetes. However, it remains unclear what the optimal strategies are to increase PA behaviour in people with Type 2 diabetes in routine primary care. This study will determine whether an evidence-informed multifaceted behaviour change intervention (Movement as Medicine for Type 2 Diabetes) targeting both consultation behaviour of primary healthcare professionals and PA behaviour in adults with Type 2 diabetes is both acceptable and feasible in the primary care setting. An open pilot study conducted in two primary care practices (phase one) will assess acceptability, feasibility and fidelity. Ongoing feedback from participating primary healthcare professionals and patients will provide opportunities for systematic adaptation and refinement of the intervention and study procedures. A two-arm parallel group clustered pilot randomised controlled trial with patients from participating primary care practices in North East England will assess acceptability, feasibility, and fidelity of the intervention (versus usual clinical care) and trial processes over a 12-month period. Consultation behaviour involving fidelity of intervention delivery, diabetes and PA related knowledge, attitudes/beliefs, intentions and self-efficacy for delivering a behaviour change intervention targeting PA behaviour will be assessed in primary healthcare professionals. We will rehearse the collection of outcome data (with the focus on data yield and quality) for a future definitive trial, through outcome assessment at baseline, one, six and twelve months. An embedded qualitative process evaluation and treatment fidelity assessment will explore issues around intervention implementation and assess whether intervention components can be reliably and faithfully delivered in routine primary care. Movement as Medicine for Type 2 Diabetes will address an important gap in the evidence-base, that is, the need for interventions to increase free-living PA behaviour in adults with Type 2 diabetes. The multifaceted intervention incorporates an online accredited training programme for primary healthcare professionals and represents, to the best of our knowledge, the first of its kind in the United Kingdom. This study will establish whether the multifaceted behavioural intervention is acceptable and feasible in routine primary care. Movement as Medicine for Type 2 Diabetes (MaMT2D) was registered with Current Controlled Trials on the 14th January 2012: ISRCTN67997502. The first primary care practice was randomised on the 5th October 2012.

Combined Pressure, Temperature Contrast and Surface-Enhanced Separation of Carbon Dioxide for Post-Combustion Carbon Capture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Zhen; Wong, Michael; Gupta, Mayank

The Rice University research team developed a hybrid carbon dioxide (CO 2) absorption process combining absorber and stripper columns using a high surface area ceramic foam gas-liquid contactor for enhanced mass transfer and utilizing waste heat for regeneration. This integrated absorber/desorber arrangement will reduce space requirements, an important factor for retrofitting existing coal-fired power plants with CO 2 capture technology. Described in this report, we performed an initial analysis to estimate the technical and economic feasibility of the process. A one-dimensional (1D) CO 2 absorption column was fabricated to measure the hydrodynamic and mass transfer characteristics of the ceramic foam.more » A bench-scale prototype was constructed to implement the complete CO 2 separation process and tested to study various aspects of fluid flow in the process. A model was developed to simulate the two-dimensional (2D) fluid flow and optimize the CO 2 capture process. Test results were used to develop a final technoeconomic analysis and identify the most appropriate absorbent as well as optimum operating conditions to minimize capital and operating costs. Finally, a technoeconomic study was performed to assess the feasibility of integrating the process into a 600 megawatt electric (MWe) coal-fired power plant. With process optimization, $82/MWh of COE can be achieved using our integrated absorber/desorber CO 2 capture technology, which is very close to DOE's target that no more than a 35% increase in COE with CCS. An environmental, health, and safety (EH&S) assessment of the capture process indicated no significant concern in terms of EH&S effects or legislative compliance.« less

Biosorption Behavior of Ciprofloxacin onto Enteromorpha prolifera: Isotherm and Kinetic Studies.

PubMed

Wu, Shaoling; Li, Yanhui; Zhao, Xindong; Du, Qiuju; Wang, Zonghua; Xia, Yanzhi; Xia, Linhua

2015-01-01

The studies aimed at the feasibility of using Enteromorpha prolifera for the removal of ciprofloxacin from aqueous solutions. Batch experiments were carried out for the biosorption of ciprofloxacin onto Enteromorpha prolifera. The factors affecting the biosorption process such as the initial concentration, dosage, pH and the contact time were studied. Enteromorpha prolifera exhibited a maximum biosorption capacity of 21.7 mg/g. The pseudo-second-order kinetic model described the ciprofloxacin biosorption process with a good fitting. The optimum pH of ciprofloxacin adsorbed by Enteromorpha prolifera was 10. Biosorption equilibrium studies demonstrated that the biosorption followed Freundlich isotherm model, which implied a heterogeneous biosorption phenomenon.

Background studies in support of a feasibility assessment on the use of copper-base materials for nuclear waste packages in a repository in tuff

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Konynenburg, R.A.; Kundig, K.J.A.; Lyman, W.S.

1990-06-01

This report combines six work units performed in FY`85--86 by the Copper Development Association and the International Copper Research Association under contract with the University of California. The work includes literature surveys and state-of-the-art summaries on several considerations influencing the feasibility of the use of copper-base materials for fabricating high-level nuclear waste packages for the proposed repository in tuff rock at Yucca Mountain, Nevada. The general conclusion from this work was that copper-base materials are viable candidates for inclusion in the materials selection process for this application. 55 refs., 48 figs., 22 tabs.

Feasibility study of a family-focused intervention to improve outcomes for children with FASD.

PubMed

Reid, Natasha; Dawe, Sharon; Harnett, Paul; Shelton, Doug; Hutton, Lauren; O'Callaghan, Frances

2017-08-01

Growing evidence shows that children with fetal alcohol spectrum disorder (FASD) can benefit from interventions, and specifically interventions focused on improving self-regulation. However, novel ways of improving outcomes for children with FASD need further investigation so that programs target not only the individual child but also the family context, which includes the parent-child relationship. The current study aimed to evaluate the feasibility of an adapted version of the Parents under Pressure (PuP) program that addresses self-regulatory processes, through improving the parent-child relationship and the use of mindfulness-based strategies for both children and parents. This was a mixed methods study. Feasibility was examined by evaluating recruitment, data collection/outcome measures, and intervention procedures. The study used a phenomenological approach to obtain qualitative information from caregivers and a single-case experimental design to evaluate the preliminary participant responses to the intervention. Two out of three families completed treatment. The recruitment and intervention procedures were found to be suitable for and acceptable to the families involved. Some concerns were identified regarding the outcome measures that would need to be addressed in future research. Quantitative and qualitative outcomes were positive. The results provide preliminary support for the feasibility of an adapted version of the PuP program. Thus, offering a potential multi-component option, that aims to improve self-regulatory skills for children with FASD, through focusing on improving the parent-child relationship and incorporating mindfulness-based techniques for both parents and children. Copyright © 2017 Elsevier Ltd. All rights reserved.

Femtosecond pulse laser-oriented recording on dental prostheses: a trial introduction.

PubMed

Ichikawa, Tetsuo; Hayasaki, Yoshio; Fujita, Keiji; Nagao, Kan; Murata, Masayo; Kawano, Takanori; Chen, JianRong

2006-12-01

The purpose of this study was to evaluate the feasibility of using a femtosecond pulse laser processing technique to store information on a dental prosthesis. Commercially pure titanium plates were processed by a femtosecond pulse laser system. The processed surface structure was observed with a reflective illumination microscope, scanning electron microscope, and atomic force microscope. Processed area was an almost conical pit with a clear boundary. When laser pulse energy was 2 microJ, the diameter and depth were approximately 10microm and 0.2 microm respectively--whereby both increased with laser pulse energy. Further, depth of pit increased with laser pulse number without any thermal effect. This study showed that the femtosecond pulse processing system was capable of recording personal identification and optional additional information on a dental prosthesis.

Assessing Chemical Process Sustainability with GREENSCOPE

EPA Pesticide Factsheets

GREENSCOPE is a sustainability assessment tool used to evaluate and assist in the design of chemical processes. The goal is to minimize resource use, prevent or reduce releases, and increase the economic feasibility of a chemical process.

Quality by design for herbal drugs: a feedforward control strategy and an approach to define the acceptable ranges of critical quality attributes.

PubMed

Yan, Binjun; Li, Yao; Guo, Zhengtai; Qu, Haibin

2014-01-01

The concept of quality by design (QbD) has been widely accepted and applied in the pharmaceutical manufacturing industry. There are still two key issues to be addressed in the implementation of QbD for herbal drugs. The first issue is the quality variation of herbal raw materials and the second issue is the difficulty in defining the acceptable ranges of critical quality attributes (CQAs). To propose a feedforward control strategy and a method for defining the acceptable ranges of CQAs for the two issues. In the case study of the ethanol precipitation process of Danshen (Radix Salvia miltiorrhiza) injection, regression models linking input material attributes and process parameters to CQAs were built first and an optimisation model for calculating the best process parameters according to the input materials was established. Then, the feasible material space was defined and the acceptable ranges of CQAs for the previous process were determined. In the case study, satisfactory regression models were built with cross-validated regression coefficients (Q(2) ) all above 91 %. The feedforward control strategy was applied successfully to compensate the quality variation of the input materials, which was able to control the CQAs in the 90-110 % ranges of the desired values. In addition, the feasible material space for the ethanol precipitation process was built successfully, which showed the acceptable ranges of the CQAs for the concentration process. The proposed methodology can help to promote the implementation of QbD for herbal drugs. Copyright © 2013 John Wiley & Sons, Ltd.

Development of a simulation environment to support intercalibration studies over the Algodones Dunes system

NASA Astrophysics Data System (ADS)

Eon, Rehman S.; Gerace, Aaron D.; Montanaro, Matthew; Ambeau, Brittany L.; McCorkel, Joel T.

2018-01-01

The ability of sensors to detect changes in the Earth's environment is dependent on retrieving radiometrically consistent and calibrated measurements from its surface. Intercalibration provides consistency among satellite instruments and ensures fidelity of scientific information. Intercalibration is especially important for spaceborne satellites without any on-board calibration, as accuracy of instruments is significantly affected by changes that occur postlaunch. To better understand the key parameters that impact the intercalibration process, this paper describes a simulation environment that was developed to support the primary mission of the Algodones Dunes campaign. Specifically, measurements obtained from the campaign were utilized to create a synthetic landscape to assess the feasibility of using the Algodones Dunes system as an intercalibration site for spaceborne instruments. The impact of two key parameters (differing view-angles and temporal offsets between instruments) on the intercalibration process was assessed. Results of these studies indicate that although the accuracy of intercalibration is sensitive to these parameters, proper knowledge of their impact leads to situations that minimize their effect. This paper concludes with a case study that addresses the feasibility of performing intercalibration on the International Space Station's platform to support NASA's CLARREO, the climate absolute radiance and refractivity observatory, mission.

Identification of characteristic frequencies of damaged railway tracks using field hammer test measurements

NASA Astrophysics Data System (ADS)

Oregui, M.; Li, Z.; Dollevoet, R.

2015-03-01

In this paper, the feasibility of the Frequency Response Function (FRF)-based statistical method to identify the characteristic frequencies of railway track defects is studied. The method compares a damaged track state to a healthy state based on non-destructive field hammer test measurements. First, a study is carried out to investigate the repeatability of hammer tests in railway tracks. By changing the excitation and measurement locations it is shown that the variability introduced by the test process is negligible. Second, following the concepts of control charts employed in process monitoring, a method to define an approximate healthy state is introduced by using hammer test measurements at locations without visual damage. Then, the feasibility study includes an investigation into squats (i.e. a major type of rail surface defect) of varying severity. The identified frequency ranges related to squats agree with those found in an extensively validated vehicle-borne detection system. Therefore, the FRF-based statistical method in combination with the non-destructive hammer test measurements has the potential to be employed to identify the characteristic frequencies of damaged conditions in railway tracks in the frequency range of 300-3000 Hz.

Potential for Integrating Entry Guidance into the Multi-Disciplinary Entry Vehicle Optimization Environment

NASA Technical Reports Server (NTRS)

D'souza, Sarah N.; Kinney, David J.; Garcia, Joseph A.; Sarigul-Klijn, Nesrin

2014-01-01

The state-of-the-art in vehicle design decouples flight feasible trajectory generation from the optimization process of an entry spacecraft shape. The disadvantage to this decoupled process is seen when a particular aeroshell does not meet in-flight requirements when integrated into Guidance, Navigation, and Control simulations. It is postulated that the integration of a guidance algorithm into the design process will provide a real-time, rapid trajectory generation technique to enhance the robustness of vehicle design solutions. The potential benefit of this integration is a reduction in design cycles (possible cost savings) and increased accuracy in the aerothermal environment (possible mass savings). This work examines two aspects: 1) the performance of a reference tracking guidance algorithm for five different geometries with the same reference trajectory and 2) the potential of mass savings from improved aerothermal predictions. An Apollo Derived Guidance (ADG) algorithm is used in this study. The baseline geometry and five test case geometries were flown using the same baseline trajectory. The guided trajectory results are compared to separate trajectories determined in a vehicle optimization study conducted for NASA's Mars Entry, Descent, and Landing System Analysis. This study revealed several aspects regarding the potential gains and required developments for integrating a guidance algorithm into the vehicle optimization environment. First, the generation of flight feasible trajectories is only as good as the robustness of the guidance algorithm. The set of dispersed geometries modelled aerodynamic dispersions that ranged from +/-1% to +/-17% and a single extreme case was modelled where the aerodynamics were approximately 80% less than the baseline geometry. The ADG, as expected, was able to guide the vehicle into the aeroshell separation box at the target location for dispersions up to 17%, but failed for the 80% dispersion cases. Finally, the results revealed that including flight feasible trajectories for a set of dispersed geometries has the potential to save mass up to 430 kg.

[The relevance of core muscles in ice hockey players: a feasibility study].

PubMed

Rogan, S; Blasimann, A; Nyffenegger, D; Zimmerli, N; Radlinger, L

2013-12-01

Good core strength is seen as a condition for high performance in sports. In general, especially maximum voluntary contraction (MVC) and strength endurance (SE) measurements of the core muscles are used. In addition, a few studies can be found that examine the core muscles in terms of MVC, rate of force development (RFD) and SE. Primary aims of this feasibility study were to investigate the feasibility regarding recruiting process, compliance and safety of the testing conditions and raise the force capabilities MVC, RFD and SE of the core muscles in amateur ice hockey players. Secondarily, tendencies of correlations between muscle activity and either shot speed and sprint time shall be examined. In this feasibility study the recruitment process has been approved by 29 ice hockey players, their adherence to the study measurements of trunk muscles, and safety of the measurements was evaluated. To determine the MVC, RFD and SE for the ventral, lateral and dorsal core muscles a dynamic force measurement was performed. To determine the correlation between core muscles and shot speed and 40-m sprint, respectively, the rank correlation coefficient (rho) from Spearman was used. The recruited number of eight field players and one goal-keeper was not very high. The compliance with 100 % was excellent. The players reported no adverse symptoms or injuries after the measurements. The results show median values for the ventral core muscles for MVC with 46.5 kg for RFD with 2.23 m/s2 and 96 s for the SE. For lateral core muscle median values of the lateral core muscles for MVC with 71.10 kg, RFD with 2.59 m/s2 and for SE over 66 s were determined. The dorsal core muscles shows values for MVC 69.7 kg, for RFD 3.39 m/s2 and for SE of 75 s. High correlations between MVC of the ventral core muscles (rho = -0.721, p = 0.021), and between the SE of the ventral core muscles (rho = 0.787, p = 0.012), and the shot velocity rate were determined. Another high correlation between SE of the ventral core muscles and sprint over 40 m (rho = 0.717, p = 0.030) could be demonstrated. This feasibility study has shown that the implementation of the selected design is adapted for future studies. Further studies are needed to better understand the relationship between the velocity rate and the MVC, and the SE respectively, as well as between the sprint and the SE. © Georg Thieme Verlag KG Stuttgart · New York.

Intraoperative application of geometric three-dimensional mitral valve assessment package: a feasibility study.

PubMed

Mahmood, Feroze; Karthik, Swaminathan; Subramaniam, Balachundhar; Panzica, Peter J; Mitchell, John; Lerner, Adam B; Jervis, Karinne; Maslow, Andrew D

2008-04-01

To study the feasibility of using 3-dimensional (3D) echocardiography in the operating room for mitral valve repair or replacement surgery. To perform geometric analysis of the mitral valve before and after repair. Prospective observational study. Academic, tertiary care hospital. Consecutive patients scheduled for mitral valve surgery. Intraoperative reconstruction of 3D images of the mitral valve. One hundred and two patients had 3D analysis of their mitral valve. Successful image reconstruction was performed in 93 patients-8 patients had arrhythmias or a dilated mitral valve annulus resulting in significant artifacts. Time from acquisition to reconstruction and analysis was less than 5 minutes. Surgeon identification of mitral valve anatomy was 100% accurate. The study confirms the feasibility of performing intraoperative 3D reconstruction of the mitral valve. This data can be used for confirmation and communication of 2-dimensional data to the surgeons by obtaining a surgical view of the mitral valve. The incorporation of color-flow Doppler into these 3D images helps in identification of the commissural or perivalvular location of regurgitant orifice. With improvements in the processing power of the current generation of echocardiography equipment, it is possible to quickly acquire, reconstruct, and manipulate images to help with timely diagnosis and surgical planning.

Is objective and accurate cognitive assessment across the menstrual cycle possible? A feasibility study

PubMed Central

Neill, Jo; Scally, Andy; Tuffnell, Derek; Marshall, Kay

2015-01-01

Objectives: Variation in plasma hormone levels influences the neurobiology of brain regions involved in cognition and emotion processing. Fluctuations in hormone levels across the menstrual cycle could therefore alter cognitive performance and wellbeing; reports have provided conflicting results, however. The aim of this study was to assess whether objective assessment of cognitive performance and self-reported wellbeing during the follicular and luteal phases of the menstrual cycle is feasible and investigate the possible reasons for variation in effects previously reported. Methods: The Cambridge Neuropsychological Test Automated Battery and Edinburgh Postnatal Depression Scale were used to assess the cognitive performance and wellbeing of 12 women. Data were analysed by self-reported and hormone-estimated phases of the menstrual cycle. Results: Recruitment to the study and assessment of cognition and wellbeing was without issue. Plasma hormone and peptide estimation showed substantial individual variation and suggests inaccuracy in self-reported menstrual phase estimation. Conclusion: Objective assessment of cognitive performance and self-assessed wellbeing across the menstrual cycle is feasible. Grouping data by hormonal profile rather by self-reported phase estimation may influence phase-mediated results. Future studies should use plasma hormone and peptide profiles to estimate cycle phase and group data for analyses. PMID:26770760

Evaluation of the Effect of Silicone Contamination on Various Bond Systems and the Feasibility of Removing the Contamination

NASA Technical Reports Server (NTRS)

Stanley, Stephanie D.

2008-01-01

Silicone is a contaminant that can cause catastrophic failure of a bond system depending on the materials and processes used to fabricate the bond system, Unfortunately, more and more materials are fabricated using silicone. The purpose of this testing was to evaluate which bond systems are sensitive to silicone contamination and whether or not a cleaning process could be utilized to remove the silicone to bring the bond system performance back to baseline. Due to the extensive nature of the testing attempts will be made to generalize the understanding within classes of substrates, bond systems, and surface preparation and cleaning methods. This study was done by contaminating various meta! (steel, inconel, and aluminum), phenolic (carbon cloth phenolic and glass cloth phenolic), and rubber (natural rubber, asbestos-silicone dioxide filled natural butyldiene rubber, silica-filled ethylene propylenediene monomer, and carbon-filled ethylene propylenediene monomer) substrates which were then bonded using various adhesives and coatings (epoxy-based adhesives, paints, ablative compounds, and Chemlok adhesives) to determine the effect silicone contamination has on a given bond system's performance. The test configurations depended on the bond system being evaluated. The study also evaluated the feasibility of removing the silicone contamination by cleaning the contaminated substrate prior to bonding. The cleaning processes also varied depending on bond system.

Applications of Low Altitude Remote Sensing in Agriculture upon Farmers' Requests– A Case Study in Northeastern Ontario, Canada

PubMed Central

Zhang, Chunhua; Walters, Dan; Kovacs, John M.

2014-01-01

With the growth of the low altitude remote sensing (LARS) industry in recent years, their practical application in precision agriculture seems all the more possible. However, only a few scientists have reported using LARS to monitor crop conditions. Moreover, there have been concerns regarding the feasibility of such systems for producers given the issues related to the post-processing of images, technical expertise, and timely delivery of information. The purpose of this study is to showcase actual requests by farmers to monitor crop conditions in their fields using an unmanned aerial vehicle (UAV). Working in collaboration with farmers in northeastern Ontario, we use optical and near-infrared imagery to monitor fertilizer trials, conduct crop scouting and map field tile drainage. We demonstrate that LARS imagery has many practical applications. However, several obstacles remain, including the costs associated with both the LARS system and the image processing software, the extent of professional training required to operate the LARS and to process the imagery, and the influence from local weather conditions (e.g. clouds, wind) on image acquisition all need to be considered. Consequently, at present a feasible solution for producers might be the use of LARS service provided by private consultants or in collaboration with LARS scientific research teams. PMID:25386696

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benson, Steven; Envergex, Srivats; Browers, Bruce

Barr Engineering Co. was retained by the Institute for Energy Studies (IES) at University of North Dakota (UND) to conduct a technical and economic feasibility analysis of an innovative hybrid sorbent technology (CACHYS™) for carbon dioxide (CO2) capture and separation from coal combustion–derived flue gas. The project team for this effort consists of the University of North Dakota, Envergex LLC, Barr Engineering Co., and Solex Thermal Science, along with industrial support from Allete, BNI Coal, SaskPower, and the North Dakota Lignite Energy Council. An initial economic and feasibility study of the CACHYS™ concept, including definition of the process, development ofmore » process flow diagrams (PFDs), material and energy balances, equipment selection, sizing and costing, and estimation of overall capital and operating costs, is performed by Barr with information provided by UND and Envergex. The technology—Capture from Existing Coal-Fired Plants by Hybrid Sorption Using Solid Sorbents Capture (CACHYS™)—is a novel solid sorbent technology based on the following ideas: reduction of energy for sorbent regeneration, utilization of novel process chemistry, contactor conditions that minimize sorbent-CO2 heat of reaction and promote fast CO2 capture, and a low-cost method of heat management. The technology’s other key component is the use of a low-cost sorbent.« less

Applications of low altitude remote sensing in agriculture upon farmers' requests--a case study in northeastern Ontario, Canada.

PubMed

Zhang, Chunhua; Walters, Dan; Kovacs, John M

2014-01-01

With the growth of the low altitude remote sensing (LARS) industry in recent years, their practical application in precision agriculture seems all the more possible. However, only a few scientists have reported using LARS to monitor crop conditions. Moreover, there have been concerns regarding the feasibility of such systems for producers given the issues related to the post-processing of images, technical expertise, and timely delivery of information. The purpose of this study is to showcase actual requests by farmers to monitor crop conditions in their fields using an unmanned aerial vehicle (UAV). Working in collaboration with farmers in northeastern Ontario, we use optical and near-infrared imagery to monitor fertilizer trials, conduct crop scouting and map field tile drainage. We demonstrate that LARS imagery has many practical applications. However, several obstacles remain, including the costs associated with both the LARS system and the image processing software, the extent of professional training required to operate the LARS and to process the imagery, and the influence from local weather conditions (e.g. clouds, wind) on image acquisition all need to be considered. Consequently, at present a feasible solution for producers might be the use of LARS service provided by private consultants or in collaboration with LARS scientific research teams.

Heavy Metal Adsorption onto Kappaphycus sp. from Aqueous Solutions: The Use of Error Functions for Validation of Isotherm and Kinetics Models

PubMed Central

Rahman, Md. Sayedur; Sathasivam, Kathiresan V.

2015-01-01

Biosorption process is a promising technology for the removal of heavy metals from industrial wastes and effluents using low-cost and effective biosorbents. In the present study, adsorption of Pb2+, Cu2+, Fe2+, and Zn2+ onto dried biomass of red seaweed Kappaphycus sp. was investigated as a function of pH, contact time, initial metal ion concentration, and temperature. The experimental data were evaluated by four isotherm models (Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich) and four kinetic models (pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion models). The adsorption process was feasible, spontaneous, and endothermic in nature. Functional groups in the biomass involved in metal adsorption process were revealed as carboxylic and sulfonic acids and sulfonate by Fourier transform infrared analysis. A total of nine error functions were applied to validate the models. We strongly suggest the analysis of error functions for validating adsorption isotherm and kinetic models using linear methods. The present work shows that the red seaweed Kappaphycus sp. can be used as a potentially low-cost biosorbent for the removal of heavy metal ions from aqueous solutions. Further study is warranted to evaluate its feasibility for the removal of heavy metals from the real environment. PMID:26295032

Heavy Metal Adsorption onto Kappaphycus sp. from Aqueous Solutions: The Use of Error Functions for Validation of Isotherm and Kinetics Models.

PubMed

Rahman, Md Sayedur; Sathasivam, Kathiresan V

2015-01-01

Biosorption process is a promising technology for the removal of heavy metals from industrial wastes and effluents using low-cost and effective biosorbents. In the present study, adsorption of Pb(2+), Cu(2+), Fe(2+), and Zn(2+) onto dried biomass of red seaweed Kappaphycus sp. was investigated as a function of pH, contact time, initial metal ion concentration, and temperature. The experimental data were evaluated by four isotherm models (Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich) and four kinetic models (pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion models). The adsorption process was feasible, spontaneous, and endothermic in nature. Functional groups in the biomass involved in metal adsorption process were revealed as carboxylic and sulfonic acids and sulfonate by Fourier transform infrared analysis. A total of nine error functions were applied to validate the models. We strongly suggest the analysis of error functions for validating adsorption isotherm and kinetic models using linear methods. The present work shows that the red seaweed Kappaphycus sp. can be used as a potentially low-cost biosorbent for the removal of heavy metal ions from aqueous solutions. Further study is warranted to evaluate its feasibility for the removal of heavy metals from the real environment.

Adaptive adjustment of interval predictive control based on combined model and application in shell brand petroleum distillation tower

NASA Astrophysics Data System (ADS)

Sun, Chao; Zhang, Chunran; Gu, Xinfeng; Liu, Bin

2017-10-01

Constraints of the optimization objective are often unable to be met when predictive control is applied to industrial production process. Then, online predictive controller will not find a feasible solution or a global optimal solution. To solve this problem, based on Back Propagation-Auto Regressive with exogenous inputs (BP-ARX) combined control model, nonlinear programming method is used to discuss the feasibility of constrained predictive control, feasibility decision theorem of the optimization objective is proposed, and the solution method of soft constraint slack variables is given when the optimization objective is not feasible. Based on this, for the interval control requirements of the controlled variables, the slack variables that have been solved are introduced, the adaptive weighted interval predictive control algorithm is proposed, achieving adaptive regulation of the optimization objective and automatically adjust of the infeasible interval range, expanding the scope of the feasible region, and ensuring the feasibility of the interval optimization objective. Finally, feasibility and effectiveness of the algorithm is validated through the simulation comparative experiments.

A stochastic estimation procedure for intermittently-observed semi-Markov multistate models with back transitions.

PubMed

Aralis, Hilary; Brookmeyer, Ron

2017-01-01

Multistate models provide an important method for analyzing a wide range of life history processes including disease progression and patient recovery following medical intervention. Panel data consisting of the states occupied by an individual at a series of discrete time points are often used to estimate transition intensities of the underlying continuous-time process. When transition intensities depend on the time elapsed in the current state and back transitions between states are possible, this intermittent observation process presents difficulties in estimation due to intractability of the likelihood function. In this manuscript, we present an iterative stochastic expectation-maximization algorithm that relies on a simulation-based approximation to the likelihood function and implement this algorithm using rejection sampling. In a simulation study, we demonstrate the feasibility and performance of the proposed procedure. We then demonstrate application of the algorithm to a study of dementia, the Nun Study, consisting of intermittently-observed elderly subjects in one of four possible states corresponding to intact cognition, impaired cognition, dementia, and death. We show that the proposed stochastic expectation-maximization algorithm substantially reduces bias in model parameter estimates compared to an alternative approach used in the literature, minimal path estimation. We conclude that in estimating intermittently observed semi-Markov models, the proposed approach is a computationally feasible and accurate estimation procedure that leads to substantial improvements in back transition estimates.

Endocrine disruptors compounds, pharmaceuticals and personal care products in urban wastewater: implications for agricultural reuse and their removal by adsorption process.

PubMed

Grassi, Mariangela; Rizzo, Luigi; Farina, Anna

2013-06-01

In the last years, a lot of emerging contaminants, such as, endocrine disruptors compounds (EDCs), pharmaceuticals, and personal care products (PPCPs) have been detected in wastewater. Because of their toxicity and possible adverse effects on the environment and humans, their release from urban wastewater treatment plants (UWWTPs) effluents should be minimized, particularly when a wastewater reuse for crops irrigation is expected. Many processes have been investigated for advanced treatment of UWWTP effluents as well as for emerging contaminant degradation; among these, adsorption process was successfully used to remove EDCs and PPCPs from wastewater. This article shortly reviews EDCs and PPCPs removal from UWWTP effluents by adsorption process using conventional and non-conventional adsorbents. The fate of EDCs and PPCPs in UWWTPs and the implications for agricultural wastewater reuse has been addressed too. In spite of the adsorption process looking to be a valuable alternative to other advanced technologies for the removal of emerging contaminants from wastewater, some gaps still remain to evaluate the actual feasibility at full scale. However, according to a few studies available in scientific literature on the use of both powdered activated carbon and granular activated carbon at full scale, adsorption process by activated carbon is a promising, potentially effective, and economically feasible solution for producing safe wastewater for agricultural reuse.

Practice and professional development plans (PPDPs): results of a feasibility study.

PubMed

Elwyn, G; Carlisle, S; Hocking, P; Smail, S

2001-01-01

Dissatisfaction with uniprofessional education structures as a means of improving the quality of healthcare has led to proposals to develop ways of integrating professional learning and organisational development. Test the feasibility of introducing practice and professional development plans using a centrally sponsored project in Wales. Qualitative observational study. All 541 practices in Wales were alerted to the project and invited to apply. A selection process was suggested to Health Authorities but not always efficiently conducted: 23 practices were selected and 18 participated in the process. Central funding was made available to health authorities. The project framework was designed by an educational department and conceptualised as the development of personal portfolios linked to one key organisation change in each practice, facilitated by external consultants who would typically hold workshops or other events. An independent researcher using non-participant observation techniques at workshops and practices undertook documentary analysis and fieldwork in four health authorities. Difficulties were encountered with the process of implementing the project: marketing and practice selection inconsistencies delayed the work and it was difficult to recruit practices into the project. The lack of experienced individuals to do the work and practitioner suspicion about perceived 'management' agendas were significant problems. After initial hesitancies most practices appreciated the value of developing wider ownership and commitment to proposed practice changes. Organisations found it difficult to support individual completion of the personal portfolio component of the plans. The ability to develop systems for clinical services was dependent on having already established a culture of effective teamwork in the organisation. This work supports the view that organisational development has considerable potential for bringing about effective change, and individual contributions could form a valuable component of personal portfolios. We believe that the existing structures in education and management in the health service are not yet able to support these processes. Evidence from the fields of risk management and quality improvement all point to the need to develop effective organisational systems and the results of this feasibility study indicate that alternative models of sustaining organisational development need careful evaluation.